Merge commit 'v2.6.27-rc7' into x86/microcode

6053 files changed, 158330 insertions, 63064 deletions

diff --git a/.mailmap b/.mailmap
index 726084286d3..dfab12f809e 100644
--- a/.mailmap
+++ b/.mailmap
@@ -96,4 +96,6 @@ Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 6de71308a90..5b5aba404aa 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -89,8 +89,6 @@ cciss.txt
 	- info, major/minor #'s for Compaq's SMART Array Controllers.
 cdrom/
 	- directory with information on the CD-ROM drivers that Linux has.
-cli-sti-removal.txt
-	- cli()/sti() removal guide.
 computone.txt
 	- info on Computone Intelliport II/Plus Multiport Serial Driver.
 connector/
diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
new file mode 100644
index 00000000000..79a4a75b2d2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-regulator
@@ -0,0 +1,315 @@
+What:		/sys/class/regulator/.../state
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		state. This holds the regulator output state.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator output is ON and is supplying
+		power to the system.
+
+		'disabled' means the regulator output is OFF and is not
+		supplying power to the system..
+
+		'unknown' means software cannot determine the state.
+
+		NOTE: this field can be used in conjunction with microvolts
+		and microamps to determine regulator output levels.
+
+
+What:		/sys/class/regulator/.../type
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		type. This holds the regulator type.
+
+		This will be one of the following strings:
+
+		'voltage'
+		'current'
+		'unknown'
+
+		'voltage' means the regulator output voltage can be controlled
+		by software.
+
+		'current' means the regulator output current limit can be
+		controlled by software.
+
+		'unknown' means software cannot control either voltage or
+		current limit.
+
+
+What:		/sys/class/regulator/.../microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		microvolts. This holds the regulator output voltage setting
+		measured in microvolts (i.e. E-6 Volts).
+
+		NOTE: This value should not be used to determine the regulator
+		output voltage level as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		microamps. This holds the regulator output current limit
+		setting measured in microamps (i.e. E-6 Amps).
+
+		NOTE: This value should not be used to determine the regulator
+		output current level as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../opmode
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		opmode. This holds the regulator operating mode setting.
+
+		The opmode value can be one of the following strings:
+
+		'fast'
+		'normal'
+		'idle'
+		'standby'
+		'unknown'
+
+		The modes are described in include/linux/regulator/regulator.h
+
+		NOTE: This value should not be used to determine the regulator
+		output operating mode as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../min_microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		min_microvolts. This holds the minimum safe working regulator
+		output voltage setting for this domain measured in microvolts.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no min microvolts constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../max_microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		max_microvolts. This holds the maximum safe working regulator
+		output voltage setting for this domain measured in microvolts.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no max microvolts constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../min_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		min_microamps. This holds the minimum safe working regulator
+		output current limit setting for this domain measured in
+		microamps.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no min microamps constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../max_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		max_microamps. This holds the maximum safe working regulator
+		output current limit setting for this domain measured in
+		microamps.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no max microamps constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../num_users
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		num_users. This holds the number of consumer devices that
+		have called regulator_enable() on this regulator.
+
+
+What:		/sys/class/regulator/.../requested_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		requested_microamps. This holds the total requested load
+		current in microamps for this regulator from all its consumer
+		devices.
+
+
+What:		/sys/class/regulator/.../parent
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Some regulator directories will contain a link called parent.
+		This points to the parent or supply regulator if one exists.
+
+What:		/sys/class/regulator/.../suspend_mem_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_mem_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to memory.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to memory voltage defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_disk_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_disk_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to disk.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to disk voltage defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_standby_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_standby_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to standby.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to standby voltage defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_mem_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_mem_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to
+		memory.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to memory mode defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_disk_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_disk_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to disk.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to disk mode defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_standby_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_standby_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to
+		standby.
+
+		NOTE: this will return the string 'not defined' if
+		the power domain has no suspend to standby mode defined by
+		platform code.
+
+What:		/sys/class/regulator/.../suspend_mem_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_mem_state. This holds the regulator operating state
+		when suspended to memory.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'not defined'
+
+What:		/sys/class/regulator/.../suspend_disk_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_disk_state. This holds the regulator operating state
+		when suspended to disk.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'not defined'
+
+What:		/sys/class/regulator/.../suspend_standby_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+		Each regulator directory will contain a field called
+		suspend_standby_state. This holds the regulator operating
+		state when suspended to standby.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'not defined'
diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
new file mode 100644
index 00000000000..4573fd4b787
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
@@ -0,0 +1,27 @@
+What:		/sys/firmware/sgi_uv/
+Date:		August 2008
+Contact:	Russ Anderson <rja@sgi.com>
+Description:
+		The /sys/firmware/sgi_uv directory contains information
+		about the SGI UV platform.
+
+		Under that directory are a number of files:
+
+			partition_id
+			coherence_id
+
+		The partition_id entry contains the partition id.
+		SGI UV systems can be partitioned into multiple physical
+		machines, which each partition running a unique copy
+		of the operating system.  Each partition will have a unique
+		partition id.  To display the partition id, use the command:
+
+			cat /sys/firmware/sgi_uv/partition_id
+
+		The coherence_id entry contains the coherence id.
+		A partitioned SGI UV system can have one or more coherence
+		domain.  The coherence id indicates which coherence domain
+		this partition is in.  To display the coherence id, use the
+		command:
+
+			cat /sys/firmware/sgi_uv/coherence_id
diff --git a/Documentation/ABI/testing/sysfs-gpio b/Documentation/ABI/testing/sysfs-gpio
new file mode 100644
index 00000000000..8aab8092ad3
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-gpio
@@ -0,0 +1,26 @@
+What:		/sys/class/gpio/
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Brownell <dbrownell@users.sourceforge.net>
+Description:
+
+  As a Kconfig option, individual GPIO signals may be accessed from
+  userspace.  GPIOs are only made available to userspace by an explicit
+  "export" operation.  If a given GPIO is not claimed for use by
+  kernel code, it may be exported by userspace (and unexported later).
+  Kernel code may export it for complete or partial access.
+
+  GPIOs are identified as they are inside the kernel, using integers in
+  the range 0..INT_MAX.  See Documentation/gpio.txt for more information.
+
+    /sys/class/gpio
+	/export ... asks the kernel to export a GPIO to userspace
+	/unexport ... to return a GPIO to the kernel
+	/gpioN ... for each exported GPIO #N
+	    /value ... always readable, writes fail for input GPIOs
+	    /direction ... r/w as: in, out (default low); write: high, low
+	/gpiochipN ... for each gpiochip; #N is its first GPIO
+	    /base ... (r/o) same as N
+	    /label ... (r/o) descriptive, not necessarily unique
+	    /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 0eb0d027eb3..1615350b7b5 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -12,7 +12,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml
+	    mac80211.xml debugobjects.xml sh.xml
 
 ###
 # The build process is as follows (targets):
@@ -102,6 +102,13 @@ C-procfs-example = procfs_example.xml
 C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
 $(obj)/procfs-guide.xml: $(C-procfs-example2)
 
+# List of programs to build
+##oops, this is a kernel module::hostprogs-y := procfs_example
+obj-m += procfs_example.o
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
 notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
 		   exit 1
 db2xtemplate = db2TYPE -o $(dir $@) $<
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index e8acd1f0345..372dec20c8d 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -98,6 +98,24 @@
     "Kernel debugging" select "KGDB: kernel debugging with remote gdb".
     </para>
     <para>
+    It is advised, but not required that you turn on the
+    CONFIG_FRAME_POINTER kernel option.  This option inserts code to
+    into the compiled executable which saves the frame information in
+    registers or on the stack at different points which will allow a
+    debugger such as gdb to more accurately construct stack back traces
+    while debugging the kernel.
+    </para>
+    <para>
+    If the architecture that you are using supports the kernel option
+    CONFIG_DEBUG_RODATA, you should consider turning it off.  This
+    option will prevent the use of software breakpoints because it
+    marks certain regions of the kernel's memory space as read-only.
+    If kgdb supports it for the architecture you are using, you can
+    use hardware breakpoints if you desire to run with the
+    CONFIG_DEBUG_RODATA option turned on, else you need to turn off
+    this option.
+    </para>
+    <para>
     Next you should choose one of more I/O drivers to interconnect debugging
     host and debugged target.  Early boot debugging requires a KGDB
     I/O driver that supports early debugging and the driver must be
diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c
index 7064084c1c5..2f3de0fb836 100644
--- a/Documentation/DocBook/procfs_example.c
+++ b/Documentation/DocBook/procfs_example.c
@@ -189,8 +189,6 @@ static int __init init_procfs_example(void)
 	return 0;
 
 no_symlink:
-	remove_proc_entry("tty", example_dir);
-no_tty:
 	remove_proc_entry("bar", example_dir);
 no_bar:
 	remove_proc_entry("foo", example_dir);
@@ -206,7 +204,6 @@ out:
 static void __exit cleanup_procfs_example(void)
 {
 	remove_proc_entry("jiffies_too", example_dir);
-	remove_proc_entry("tty", example_dir);
 	remove_proc_entry("bar", example_dir);
 	remove_proc_entry("foo", example_dir);
 	remove_proc_entry("jiffies", example_dir);
@@ -222,3 +219,4 @@ module_exit(cleanup_procfs_example);
 
 MODULE_AUTHOR("Erik Mouw");
 MODULE_DESCRIPTION("procfs examples");
+MODULE_LICENSE("GPL");
diff --git a/Documentation/DocBook/s390-drivers.tmpl b/Documentation/DocBook/s390-drivers.tmpl
index 4acc73240a6..95bfc12e543 100644
--- a/Documentation/DocBook/s390-drivers.tmpl
+++ b/Documentation/DocBook/s390-drivers.tmpl
@@ -100,7 +100,7 @@
       the hardware structures represented here, please consult the Principles
       of Operation.
     </para>
-!Iinclude/asm-s390/cio.h
+!Iarch/s390/include/asm/cio.h
     </sect1>
     <sect1 id="ccwdev">
      <title>ccw devices</title>
@@ -114,7 +114,7 @@
       ccw device structure. Device drivers must not bypass those functions
       or strange side effects may happen.
     </para>
-!Iinclude/asm-s390/ccwdev.h
+!Iarch/s390/include/asm/ccwdev.h
 !Edrivers/s390/cio/device.c
 !Edrivers/s390/cio/device_ops.c
     </sect1>
@@ -125,7 +125,7 @@
 	measurement data which is made available by the channel subsystem
 	for each channel attached device.
   </para>
-!Iinclude/asm-s390/cmb.h
+!Iarch/s390/include/asm/cmb.h
 !Edrivers/s390/cio/cmf.c
     </sect1>
   </chapter>
@@ -142,7 +142,7 @@
   </para>
    <sect1 id="ccwgroupdevices">
     <title>ccw group devices</title>
-!Iinclude/asm-s390/ccwgroup.h
+!Iarch/s390/include/asm/ccwgroup.h
 !Edrivers/s390/cio/ccwgroup.c
    </sect1>
   </chapter>
diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl
new file mode 100644
index 00000000000..0c3dc4c69dd
--- /dev/null
+++ b/Documentation/DocBook/sh.tmpl
@@ -0,0 +1,105 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="sh-drivers">
+ <bookinfo>
+  <title>SuperH Interfaces Guide</title>
+  
+  <authorgroup>
+   <author>
+    <firstname>Paul</firstname>
+    <surname>Mundt</surname>
+    <affiliation>
+     <address>
+      <email>lethal@linux-sh.org</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2008</year>
+   <holder>Paul Mundt</holder>
+  </copyright>
+  <copyright>
+   <year>2008</year>
+   <holder>Renesas Technology Corp.</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License version 2 as published by the Free Software Foundation.
+   </para>
+      
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+      
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+      
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="mm">
+    <title>Memory Management</title>
+    <sect1 id="sh4">
+    <title>SH-4</title>
+      <sect2 id="sq">
+        <title>Store Queue API</title>
+!Earch/sh/kernel/cpu/sh4/sq.c
+      </sect2>
+    </sect1>
+    <sect1 id="sh5">
+      <title>SH-5</title>
+      <sect2 id="tlb">
+	<title>TLB Interfaces</title>
+!Iarch/sh/mm/tlb-sh5.c
+!Iarch/sh/include/asm/tlb_64.h
+      </sect2>
+    </sect1>
+  </chapter>
+  <chapter id="clk">
+    <title>Clock Framework Extensions</title>
+!Iarch/sh/include/asm/clock.h
+  </chapter>
+  <chapter id="mach">
+    <title>Machine Specific Interfaces</title>
+    <sect1 id="dreamcast">
+      <title>mach-dreamcast</title>
+!Iarch/sh/boards/mach-dreamcast/rtc.c
+    </sect1>
+    <sect1 id="x3proto">
+      <title>mach-x3proto</title>
+!Earch/sh/boards/mach-x3proto/ilsel.c
+    </sect1>
+  </chapter>
+  <chapter id="busses">
+    <title>Busses</title>
+    <sect1 id="superhyway">
+      <title>SuperHyway</title>
+!Edrivers/sh/superhyway/superhyway.c
+    </sect1>
+
+    <sect1 id="maple">
+      <title>Maple</title>
+!Edrivers/sh/maple/maple.c
+    </sect1>
+  </chapter>
+</book>
diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl
index 89817795e66..0bc25949b66 100644
--- a/Documentation/DocBook/videobook.tmpl
+++ b/Documentation/DocBook/videobook.tmpl
@@ -1648,7 +1648,7 @@ static struct video_buffer capture_fb;
 
   <chapter id="pubfunctions">
      <title>Public Functions Provided</title>
-!Edrivers/media/video/videodev.c
+!Edrivers/media/video/v4l2-dev.c
   </chapter>
 
 </book>
diff --git a/Documentation/DocBook/z8530book.tmpl b/Documentation/DocBook/z8530book.tmpl
index 42c75ba71ba..a42a8a4c768 100644
--- a/Documentation/DocBook/z8530book.tmpl
+++ b/Documentation/DocBook/z8530book.tmpl
@@ -69,12 +69,6 @@
 	device to be used as both a tty interface and as a synchronous 
 	controller is a project for Linux post the 2.4 release
   </para>
-  <para>
-	The support code handles most common card configurations and
-	supports running both Cisco HDLC and Synchronous PPP. With extra
-	glue the frame relay and X.25 protocols can also be used with this
-	driver.
-  </para>
   </chapter>
   
   <chapter id="Driver_Modes">
@@ -179,35 +173,27 @@
   <para>
 	If you wish to use the network interface facilities of the driver,
 	then you need to attach a network device to each channel that is
-	present and in use. In addition to use the SyncPPP and Cisco HDLC
+	present and in use. In addition to use the generic HDLC
 	you need to follow some additional plumbing rules. They may seem 
 	complex but a look at the example hostess_sv11 driver should
 	reassure you.
   </para>
   <para>
 	The network device used for each channel should be pointed to by
-	the netdevice field of each channel. The dev-&gt; priv field of the
+	the netdevice field of each channel. The hdlc-&gt; priv field of the
 	network device points to your private data - you will need to be
-	able to find your ppp device from this. In addition to use the
-	sync ppp layer the private data must start with a void * pointer
-	to the syncppp structures.
+	able to find your private data from this.
   </para>
   <para>
 	The way most drivers approach this particular problem is to
 	create a structure holding the Z8530 device definition and
-	put that and the syncppp pointer into the private field of
-	the network device. The network device fields of the channels
-	then point back to the network devices. The ppp_device can also
-	be put in the private structure conveniently.
+	put that into the private field of the network device. The
+	network device fields of the channels then point back to the
+	network devices.
   </para>
   <para>
-	If you wish to use the synchronous ppp then you need to attach
-	the syncppp layer to the network device. You should do this before
-	you register the network device. The
-	<function>sppp_attach</function> requires that the first void *
-	pointer in your private data is pointing to an empty struct
-	ppp_device. The function fills in the initial data for the
-	ppp/hdlc layer.
+	If you wish to use the generic HDLC then you need to register
+	the HDLC device.
   </para>
   <para>
 	Before you register your network device you will also need to
@@ -314,10 +300,10 @@
 	buffer in sk_buff format and queues it for transmission. The
 	caller must provide the entire packet with the exception of the
 	bitstuffing and CRC. This is normally done by the caller via
-	the syncppp interface layer. It returns 0 if the buffer has been 
-        queued and non zero values  for queue full. If the function accepts 
-	the buffer it becomes property of the Z8530 layer and the caller 
-	should not free it. 
+	the generic HDLC interface layer. It returns 0 if the buffer has been
+	queued and non zero values for queue full. If the function accepts
+	the buffer it becomes property of the Z8530 layer and the caller
+	should not free it.
   </para>
   <para>
 	The function <function>z8530_get_stats</function> returns a pointer
diff --git a/Documentation/Makefile b/Documentation/Makefile
new file mode 100644
index 00000000000..94b94573353
--- /dev/null
+++ b/Documentation/Makefile
@@ -0,0 +1,3 @@
+obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
+	filesystems/configfs/ ia64/ networking/ \
+	pcmcia/ spi/ video4linux/ vm/ watchdog/src/
diff --git a/Documentation/accounting/Makefile b/Documentation/accounting/Makefile
new file mode 100644
index 00000000000..31929eb875b
--- /dev/null
+++ b/Documentation/accounting/Makefile
@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := getdelays
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_getdelays.o += -I$(objtree)/usr/include
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 3f7755f3963..cc49400b4af 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -201,13 +201,19 @@ void print_delayacct(struct taskstats *t)
 	       "RECLAIM  %12s%15s\n"
 	       "      %15llu%15llu\n",
 	       "count", "real total", "virtual total", "delay total",
-	       t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
-	       t->cpu_delay_total,
+	       (unsigned long long)t->cpu_count,
+	       (unsigned long long)t->cpu_run_real_total,
+	       (unsigned long long)t->cpu_run_virtual_total,
+	       (unsigned long long)t->cpu_delay_total,
 	       "count", "delay total",
-	       t->blkio_count, t->blkio_delay_total,
-	       "count", "delay total", t->swapin_count, t->swapin_delay_total,
+	       (unsigned long long)t->blkio_count,
+	       (unsigned long long)t->blkio_delay_total,
 	       "count", "delay total",
-	       t->freepages_count, t->freepages_delay_total);
+	       (unsigned long long)t->swapin_count,
+	       (unsigned long long)t->swapin_delay_total,
+	       "count", "delay total",
+	       (unsigned long long)t->freepages_count,
+	       (unsigned long long)t->freepages_delay_total);
 }
 
 void task_context_switch_counts(struct taskstats *t)
@@ -215,14 +221,17 @@ void task_context_switch_counts(struct taskstats *t)
 	printf("\n\nTask   %15s%15s\n"
 	       "       %15llu%15llu\n",
 	       "voluntary", "nonvoluntary",
-	       t->nvcsw, t->nivcsw);
+	       (unsigned long long)t->nvcsw, (unsigned long long)t->nivcsw);
 }
 
 void print_cgroupstats(struct cgroupstats *c)
 {
 	printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, "
-		"uninterruptible %llu\n", c->nr_sleeping, c->nr_io_wait,
-		c->nr_running, c->nr_stopped, c->nr_uninterruptible);
+		"uninterruptible %llu\n", (unsigned long long)c->nr_sleeping,
+		(unsigned long long)c->nr_io_wait,
+		(unsigned long long)c->nr_running,
+		(unsigned long long)c->nr_stopped,
+		(unsigned long long)c->nr_uninterruptible);
 }
 
 
diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx
index 43edb4ecf27..72fbcc4fcab 100644
--- a/Documentation/arm/IXP4xx
+++ b/Documentation/arm/IXP4xx
@@ -32,7 +32,7 @@ Linux currently supports the following features on the IXP4xx chips:
 - Flash access (MTD/JFFS)
 - I2C through GPIO on IXP42x
 - GPIO for input/output/interrupts 
-  See include/asm-arm/arch-ixp4xx/platform.h for access functions.
+  See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions.
 - Timers (watchdog, OS)
 
 The following components of the chips are not supported by Linux and
diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts
index c202ed35d7d..f09ab1b90ef 100644
--- a/Documentation/arm/Interrupts
+++ b/Documentation/arm/Interrupts
@@ -158,7 +158,7 @@ So, what's changed?
    be re-checked for pending events.  (see the Neponset IRQ handler for
    details).
 
-7. fixup_irq() is gone, as is include/asm-arm/arch-*/irq.h
+7. fixup_irq() is gone, as is arch/arm/mach-*/include/mach/irq.h
 
 Please note that this will not solve all problems - some of them are
 hardware based.  Mixing level-based and edge-based IRQs on the same
diff --git a/Documentation/arm/README b/Documentation/arm/README
index 9b9c8226fdc..d98783fbe0c 100644
--- a/Documentation/arm/README
+++ b/Documentation/arm/README
@@ -79,7 +79,7 @@ Machine/Platform support
   To this end, we now have arch/arm/mach-$(MACHINE) directories which are
   designed to house the non-driver files for a particular machine (eg, PCI,
   memory management, architecture definitions etc).  For all future
-  machines, there should be a corresponding include/asm-arm/arch-$(MACHINE)
+  machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach
   directory.
 
 
@@ -176,7 +176,7 @@ Kernel entry (head.S)
   class typically based around one or more system on a chip devices, and
   acts as a natural container around the actual implementations.  These
   classes are given directories - arch/arm/mach-<class> and
-  include/asm-arm/arch-<class> - which contain the source files to
+  arch/arm/mach-<class> - which contain the source files to/include/mach
   support the machine class.  This directories also contain any machine
   specific supporting code.
 
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 8caea8c237e..ea7ccfc4b27 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -13,16 +13,31 @@ Introduction
   data-sheet/users manual to find out the complete list.
 
 
+GPIOLIB
+-------
+
+  With the event of the GPIOLIB in drivers/gpio, support for some
+  of the GPIO functions such as reading and writing a pin will
+  be removed in favour of this common access method.
+
+  Once all the extant drivers have been converted, the functions
+  listed below will be removed (they may be marked as __deprecated
+  in the near future).
+
+  - s3c2410_gpio_getpin
+  - s3c2410_gpio_setpin
+
+
 Headers
 -------
 
-  See include/asm-arm/arch-s3c2410/regs-gpio.h for the list
+  See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list
   of GPIO pins, and the configuration values for them. This
-  is included by using #include <asm/arch/regs-gpio.h>
+  is included by using #include <mach/regs-gpio.h>
 
   The GPIO management functions are defined in the hardware
-  header include/asm-arm/arch-s3c2410/hardware.h which can be
-  included by #include <asm/arch/hardware.h>
+  header arch/arm/mach-s3c2410/include/mach/hardware.h which can be
+  included by #include <mach/hardware.h>
 
   A useful amount of documentation can be found in the hardware
   header on how the GPIO functions (and others) work.
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index d04e1e30c47..cff6227b448 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -8,9 +8,10 @@ Introduction
 
   The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
   by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
-  S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
+  S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.
+
+  Support for the S3C2400 and S3C24A0 series are in progress.
 
-  Support for the S3C2400 series is in progress.
 
 Configuration
 -------------
@@ -36,7 +37,23 @@ Layout
   in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
 
   Register, kernel and platform data definitions are held in the
-  include/asm-arm/arch-s3c2410 directory.
+  arch/arm/mach-s3c2410 directory./include/mach
+
+arch/arm/plat-s3c24xx:
+
+  Files in here are either common to all the s3c24xx family,
+  or are common to only some of them with names to indicate this
+  status. The files that are not common to all are generally named
+  with the initial cpu they support in the series to ensure a short
+  name without any possibility of confusion with newer devices.
+
+  As an example, initially s3c244x would cover s3c2440 and s3c2442, but
+  with the s3c2443 which does not share many of the same drivers in
+  this directory, the name becomes invalid. We stick to s3c2440-<x>
+  to indicate a driver that is s3c2440 and s3c2442 compatible.
+
+  This does mean that to find the status of any given SoC, a number
+  of directories may need to be searched.
 
 
 Machines
@@ -159,6 +176,17 @@ NAND
   For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt
 
 
+SD/MMC
+------
+
+  The SD/MMC hardware pre S3C2443 is supported in the current
+  kernel, the driver is drivers/mmc/host/s3cmci.c and supports
+  1 and 4 bit SD or MMC cards.
+
+  The SDIO behaviour of this driver has not been fully tested. There is no
+  current support for hardware SDIO interrupts.
+
+
 Serial
 ------
 
@@ -178,6 +206,9 @@ GPIO
   The core contains support for manipulating the GPIO, see the
   documentation in GPIO.txt in the same directory as this file.
 
+  Newer kernels carry GPIOLIB, and support is being moved towards
+  this with some of the older support in line to be removed.
+
 
 Clock Management
 ----------------
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
index b93b68e2b14..67671eba423 100644
--- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -49,7 +49,7 @@ Board Support
 Platform Data
 -------------
 
-  See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+  See arch/arm/mach-s3c2410/include/mach/usb-control.h for the
   descriptions of the platform device data. An implementation
   can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
 
diff --git a/Documentation/auxdisplay/Makefile b/Documentation/auxdisplay/Makefile
new file mode 100644
index 00000000000..51fe23332c8
--- /dev/null
+++ b/Documentation/auxdisplay/Makefile
@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := cfag12864b-example
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_cfag12864b-example.o += -I$(objtree)/usr/include
diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt
index 63e59b8847c..8244c6442fa 100644
--- a/Documentation/cciss.txt
+++ b/Documentation/cciss.txt
@@ -112,27 +112,18 @@ Hot plug support for SCSI tape drives
 
 Hot plugging of SCSI tape drives is supported, with some caveats.
 The cciss driver must be informed that changes to the SCSI bus
-have been made, in addition to and prior to informing the SCSI 
-mid layer.  This may be done via the /proc filesystem.  For example:
+have been made.  This may be done via the /proc filesystem.
+For example:
 
 	echo "rescan" > /proc/scsi/cciss0/1
 
-This causes the adapter to query the adapter about changes to the 
-physical SCSI buses and/or fibre channel arbitrated loop and the 
+This causes the driver to query the adapter about changes to the
+physical SCSI buses and/or fibre channel arbitrated loop and the
 driver to make note of any new or removed sequential access devices
 or medium changers.  The driver will output messages indicating what 
 devices have been added or removed and the controller, bus, target and 
-lun used to address the device.  Once this is done, the SCSI mid layer 
-can be informed of changes to the virtual SCSI bus which the driver 
-presents to it in the usual way. For example: 
-
-	echo scsi add-single-device 3 2 1 0 > /proc/scsi/scsi
- 
-to add a device on controller 3, bus 2, target 1, lun 0.   Note that
-the driver makes an effort to preserve the devices positions
-in the virtual SCSI bus, so if you are only moving tape drives 
-around on the same adapter and not adding or removing tape drives 
-from the adapter, informing the SCSI mid layer may not be necessary.
+lun used to address the device.  It then notifies the SCSI mid layer
+of these changes.
 
 Note that the naming convention of the /proc filesystem entries 
 contains a number in addition to the driver name.  (E.g. "cciss0" 
diff --git a/Documentation/cli-sti-removal.txt b/Documentation/cli-sti-removal.txt
deleted file mode 100644
index 60932b02fcb..00000000000
--- a/Documentation/cli-sti-removal.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-
-#### cli()/sti() removal guide, started by Ingo Molnar <mingo@redhat.com>
-
-
-as of 2.5.28, five popular macros have been removed on SMP, and
-are being phased out on UP:
-
- cli(), sti(), save_flags(flags), save_flags_cli(flags), restore_flags(flags)
-
-until now it was possible to protect driver code against interrupt
-handlers via a cli(), but from now on other, more lightweight methods
-have to be used for synchronization, such as spinlocks or semaphores.
-
-for example, driver code that used to do something like:
-
-	struct driver_data;
-
-	irq_handler (...)
-	{
-		....
-		driver_data.finish = 1;
-		driver_data.new_work = 0;
-		....
-	}
-
-	...
-
-	ioctl_func (...)
-	{
-		...
-		cli();
-		...
-		driver_data.finish = 0;
-		driver_data.new_work = 2;
-		...
-		sti();
-		...
-	}
-
-was SMP-correct because the cli() function ensured that no
-interrupt handler (amongst them the above irq_handler()) function
-would execute while the cli()-ed section is executing.
-
-but from now on a more direct method of locking has to be used:
-
-	DEFINE_SPINLOCK(driver_lock);
-	struct driver_data;
-
-	irq_handler (...)
-	{
-		unsigned long flags;
-		....
-		spin_lock_irqsave(&driver_lock, flags);
-		....
-		driver_data.finish = 1;
-		driver_data.new_work = 0;
-		....
-		spin_unlock_irqrestore(&driver_lock, flags);
-		....
-	}
-
-	...
-
-	ioctl_func (...)
-	{
-		...
-		spin_lock_irq(&driver_lock);
-		...
-		driver_data.finish = 0;
-		driver_data.new_work = 2;
-		...
-		spin_unlock_irq(&driver_lock);
-		...
-	}
-
-the above code has a number of advantages:
-
-- the locking relation is easier to understand - actual lock usage
-  pinpoints the critical sections. cli() usage is too opaque.
-  Easier to understand means it's easier to debug.
-
-- it's faster, because spinlocks are faster to acquire than the
-  potentially heavily-used IRQ lock. Furthermore, your driver does
-  not have to wait eg. for a big heavy SCSI interrupt to finish,
-  because the driver_lock spinlock is only used by your driver.
-  cli() on the other hand was used by many drivers, and extended
-  the critical section to the whole IRQ handler function - creating
-  serious lock contention.
-
- 
-to make the transition easier, we've still kept the cli(), sti(),
-save_flags(), save_flags_cli() and restore_flags() macros defined
-on UP systems - but their usage will be phased out until 2.6 is
-released.
-
-drivers that want to disable local interrupts (interrupts on the
-current CPU), can use the following five macros:
-
-  local_irq_disable(), local_irq_enable(), local_save_flags(flags),
-  local_irq_save(flags), local_irq_restore(flags)
-
-but beware, their meaning and semantics are much simpler, far from
-that of the old cli(), sti(), save_flags(flags) and restore_flags(flags)
-SMP meaning:
-
-    local_irq_disable()       => turn local IRQs off
-
-    local_irq_enable()        => turn local IRQs on
-
-    local_save_flags(flags)   => save the current IRQ state into flags. The
-                                 state can be on or off. (on some
-                                 architectures there's even more bits in it.)
-
-    local_irq_save(flags)     => save the current IRQ state into flags and
-                                 disable interrupts.
-
-    local_irq_restore(flags)  => restore the IRQ state from flags.
-
-(local_irq_save can save both irqs on and irqs off state, and
-local_irq_restore can restore into both irqs on and irqs off state.)
-
-another related change is that synchronize_irq() now takes a parameter:
-synchronize_irq(irq). This change too has the purpose of making SMP
-synchronization more lightweight - this way you can wait for your own
-interrupt handler to finish, no need to wait for other IRQ sources.
-
-
-why were these changes done? The main reason was the architectural burden
-of maintaining the cli()/sti() interface - it became a real problem. The
-new interrupt system is much more streamlined, easier to understand, debug,
-and it's also a bit faster - the same happened to it that will happen to
-cli()/sti() using drivers once they convert to spinlocks :-)
-
diff --git a/Documentation/connector/Makefile b/Documentation/connector/Makefile
new file mode 100644
index 00000000000..8df1a7285a0
--- /dev/null
+++ b/Documentation/connector/Makefile
@@ -0,0 +1,11 @@
+ifneq ($(CONFIG_CONNECTOR),)
+obj-m += cn_test.o
+endif
+
+# List of programs to build
+hostprogs-y := ucon
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index ba0aacde94f..94bbc27ddd4 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -59,15 +59,10 @@ apicid values in those tables for disabled apics. In the event BIOS doesn't
 mark such hot-pluggable cpus as disabled entries, one could use this
 parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map.
 
-s390 uses the number of cpus it detects at IPL time to also the number of bits
-in cpu_possible_map. If it is desired to add additional cpus at a later time
-the number should be specified using this option or the possible_cpus option.
-
 possible_cpus=n		[s390 only] use this to set hotpluggable cpus.
 			This option sets possible_cpus bits in
 			cpu_possible_map. Thus keeping the numbers of bits set
 			constant even if the machine gets rebooted.
-			This option overrides additional_cpus.
 
 CPU maps and such
 -----------------
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index 1f5a924d1e5..47e568a9370 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -635,14 +635,16 @@ prior 'mems' setting, will not be moved.
 
 There is an exception to the above.  If hotplug functionality is used
 to remove all the CPUs that are currently assigned to a cpuset,
-then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset to allow all CPUs.  When memory
-hotplug functionality for removing Memory Nodes is available, a
-similar exception is expected to apply there as well.  In general,
-the kernel prefers to violate cpuset placement, over starving a task
-that has had all its allowed CPUs or Memory Nodes taken offline.  User
-code should reconfigure cpusets to only refer to online CPUs and Memory
-Nodes when using hotplug to add or remove such resources.
+then all the tasks in that cpuset will be moved to the nearest ancestor
+with non-empty cpus.  But the moving of some (or all) tasks might fail if
+cpuset is bound with another cgroup subsystem which has some restrictions
+on task attaching.  In this failing case, those tasks will stay
+in the original cpuset, and the kernel will automatically update
+their cpus_allowed to allow all online CPUs.  When memory hotplug
+functionality for removing Memory Nodes is available, a similar exception
+is expected to apply there as well.  In general, the kernel prefers to
+violate cpuset placement, over starving a task that has had all
+its allowed CPUs or Memory Nodes taken offline.
 
 There is a second exception to the above.  GFP_ATOMIC requests are
 kernel internal allocations that must be satisfied, immediately.
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index e6244cde26e..05c80645e4e 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -2560,9 +2560,6 @@ Your cooperation is appreciated.
 		 96 = /dev/usb/hiddev0	1st USB HID device
 		    ...
 		111 = /dev/usb/hiddev15	16th USB HID device
-		112 = /dev/usb/auer0	1st auerswald ISDN device
-		    ...
-		127 = /dev/usb/auer15	16th auerswald ISDN device
 		128 = /dev/usb/brlvgr0	First Braille Voyager device
 		    ...
 		131 = /dev/usb/brlvgr3	Fourth Braille Voyager device
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 881e6dd03ae..27809357da5 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -5,6 +5,8 @@
 *.css
 *.dvi
 *.eps
+*.fw.gen.S
+*.fw
 *.gif
 *.grep
 *.grp
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index c23955404bf..83c88cae1ed 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -19,15 +19,6 @@ Who:	Pavel Machek <pavel@suse.cz>
 
 ---------------------------
 
-What:	old NCR53C9x driver
-When:	October 2007
-Why:	Replaced by the much better esp_scsi driver.  Actual low-level
-	driver can be ported over almost trivially.
-Who:	David Miller <davem@davemloft.net>
-	Christoph Hellwig <hch@lst.de>
-
----------------------------
-
 What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
 When:	December 2008
 Files:	include/linux/video_decoder.h include/linux/videodev.h
@@ -205,19 +196,6 @@ Who:  Tejun Heo <htejun@gmail.com>
 
 ---------------------------
 
-What: The arch/ppc and include/asm-ppc directories
-When: Jun 2008
-Why:  The arch/powerpc tree is the merged architecture for ppc32 and ppc64
-      platforms.  Currently there are efforts underway to port the remaining
-      arch/ppc platforms to the merged tree.  New submissions to the arch/ppc
-      tree have been frozen with the 2.6.22 kernel release and that tree will
-      remain in bug-fix only mode until its scheduled removal.  Platforms
-      that are not ported by June 2008 will be removed due to the lack of an
-      interested maintainer.
-Who:  linuxppc-dev@ozlabs.org
-
----------------------------
-
 What:	i386/x86_64 bzImage symlinks
 When:	April 2010
 
@@ -344,3 +322,11 @@ Why:  Accounting can now be enabled/disabled without kernel recompilation.
       controlled by a kernel/module/sysfs/sysctl parameter.
 Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
 
+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why:  The 2.6 kernel supports direct writing to ide CD drives, which
+      eliminates the need for ide-scsi. The new method is more
+      efficient in every way.
+Who:  FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 680fb566b92..8362860e21a 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -144,8 +144,8 @@ prototypes:
 	void (*kill_sb) (struct super_block *);
 locking rules:
 		may block	BKL
-get_sb		yes		yes
-kill_sb		yes		yes
+get_sb		yes		no
+kill_sb		yes		no
 
 ->get_sb() returns error or 0 with locked superblock attached to the vfsmount
 (exclusive on ->s_umount).
@@ -409,12 +409,12 @@ ioctl:			yes	(see below)
 unlocked_ioctl:		no	(see below)
 compat_ioctl:		no
 mmap:			no
-open:			maybe	(see below)
+open:			no
 flush:			no
 release:		no
 fsync:			no	(see below)
 aio_fsync:		no
-fasync:			yes	(see below)
+fasync:			no
 lock:			yes
 readv:			no
 writev:			no
@@ -431,13 +431,6 @@ For many filesystems, it is probably safe to acquire the inode
 semaphore.  Note some filesystems (i.e. remote ones) provide no
 protection for i_size so you will need to use the BKL.
 
-->open() locking is in-transit: big lock partially moved into the methods.
-The only exception is ->open() in the instances of file_operations that never
-end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices
-(chrdev_open() takes lock before replacing ->f_op and calling the secondary
-method. As soon as we fix the handling of module reference counters all
-instances of ->open() will be called without the BKL.
-
 Note: ext2_release() was *the* source of contention on fs-intensive
 loads and dropping BKL on ->release() helps to get rid of that (we still
 grab BKL for cases when we close a file that had been opened r/w, but that
diff --git a/Documentation/filesystems/configfs/Makefile b/Documentation/filesystems/configfs/Makefile
new file mode 100644
index 00000000000..be7ec5e67db
--- /dev/null
+++ b/Documentation/filesystems/configfs/Makefile
@@ -0,0 +1,3 @@
+ifneq ($(CONFIG_CONFIGFS_FS),)
+obj-m += configfs_example_explicit.o configfs_example_macros.o
+endif
diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
index 44c97e6accb..fabcb0e00f2 100644
--- a/Documentation/filesystems/configfs/configfs.txt
+++ b/Documentation/filesystems/configfs/configfs.txt
@@ -311,9 +311,20 @@ the subsystem must be ready for it.
 [An Example]
 
 The best example of these basic concepts is the simple_children
-subsystem/group and the simple_child item in configfs_example.c  It
-shows a trivial object displaying and storing an attribute, and a simple
-group creating and destroying these children.
+subsystem/group and the simple_child item in configfs_example_explicit.c
+and configfs_example_macros.c.  It shows a trivial object displaying and
+storing an attribute, and a simple group creating and destroying these
+children.
+
+The only difference between configfs_example_explicit.c and
+configfs_example_macros.c is how the attributes of the childless item
+are defined.  The childless item has extended attributes, each with
+their own show()/store() operation.  This follows a convention commonly
+used in sysfs.  configfs_example_explicit.c creates these attributes
+by explicitly defining the structures involved.  Conversely
+configfs_example_macros.c uses some convenience macros from configfs.h
+to define the attributes.  These macros are similar to their sysfs
+counterparts.
 
 [Hierarchy Navigation and the Subsystem Mutex]
 
diff --git a/Documentation/filesystems/configfs/configfs_example.c b/Documentation/filesystems/configfs/configfs_example_explicit.c
index 03964879170..d428cc9f07f 100644
--- a/Documentation/filesystems/configfs/configfs_example.c
+++ b/Documentation/filesystems/configfs/configfs_example_explicit.c
@@ -1,8 +1,10 @@
 /*
  * vim: noexpandtab ts=8 sts=0 sw=8:
  *
- * configfs_example.c - This file is a demonstration module containing
- *      a number of configfs subsystems.
+ * configfs_example_explicit.c - This file is a demonstration module
+ *      containing a number of configfs subsystems.  It explicitly defines
+ *      each structure without using the helper macros defined in
+ *      configfs.h.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public
@@ -281,7 +283,6 @@ static struct config_item *simple_children_make_item(struct config_group *group,
 	if (!simple_child)
 		return ERR_PTR(-ENOMEM);
 
-
 	config_item_init_type_name(&simple_child->item, name,
 				   &simple_child_type);
 
@@ -302,8 +303,8 @@ static struct configfs_attribute *simple_children_attrs[] = {
 };
 
 static ssize_t simple_children_attr_show(struct config_item *item,
-			   		 struct configfs_attribute *attr,
-			   		 char *page)
+					 struct configfs_attribute *attr,
+					 char *page)
 {
 	return sprintf(page,
 "[02-simple-children]\n"
@@ -318,7 +319,7 @@ static void simple_children_release(struct config_item *item)
 }
 
 static struct configfs_item_operations simple_children_item_ops = {
-	.release 	= simple_children_release,
+	.release	= simple_children_release,
 	.show_attribute	= simple_children_attr_show,
 };
 
@@ -368,7 +369,6 @@ static struct config_group *group_children_make_group(struct config_group *group
 	if (!simple_children)
 		return ERR_PTR(-ENOMEM);
 
-
 	config_group_init_type_name(&simple_children->group, name,
 				    &simple_children_type);
 
@@ -387,8 +387,8 @@ static struct configfs_attribute *group_children_attrs[] = {
 };
 
 static ssize_t group_children_attr_show(struct config_item *item,
-			   		struct configfs_attribute *attr,
-			   		char *page)
+					struct configfs_attribute *attr,
+					char *page)
 {
 	return sprintf(page,
 "[03-group-children]\n"
diff --git a/Documentation/filesystems/configfs/configfs_example_macros.c b/Documentation/filesystems/configfs/configfs_example_macros.c
new file mode 100644
index 00000000000..d8e30a0378a
--- /dev/null
+++ b/Documentation/filesystems/configfs/configfs_example_macros.c
@@ -0,0 +1,448 @@
+/*
+ * vim: noexpandtab ts=8 sts=0 sw=8:
+ *
+ * configfs_example_macros.c - This file is a demonstration module
+ *      containing a number of configfs subsystems.  It uses the helper
+ *      macros defined by configfs.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ *
+ * Based on sysfs:
+ * 	sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel
+ *
+ * configfs Copyright (C) 2005 Oracle.  All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/configfs.h>
+
+
+
+/*
+ * 01-childless
+ *
+ * This first example is a childless subsystem.  It cannot create
+ * any config_items.  It just has attributes.
+ *
+ * Note that we are enclosing the configfs_subsystem inside a container.
+ * This is not necessary if a subsystem has no attributes directly
+ * on the subsystem.  See the next example, 02-simple-children, for
+ * such a subsystem.
+ */
+
+struct childless {
+	struct configfs_subsystem subsys;
+	int showme;
+	int storeme;
+};
+
+static inline struct childless *to_childless(struct config_item *item)
+{
+	return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL;
+}
+
+CONFIGFS_ATTR_STRUCT(childless);
+#define CHILDLESS_ATTR(_name, _mode, _show, _store)	\
+struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR(_name, _mode, _show, _store)
+#define CHILDLESS_ATTR_RO(_name, _show)	\
+struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR_RO(_name, _show);
+
+static ssize_t childless_showme_read(struct childless *childless,
+				     char *page)
+{
+	ssize_t pos;
+
+	pos = sprintf(page, "%d\n", childless->showme);
+	childless->showme++;
+
+	return pos;
+}
+
+static ssize_t childless_storeme_read(struct childless *childless,
+				      char *page)
+{
+	return sprintf(page, "%d\n", childless->storeme);
+}
+
+static ssize_t childless_storeme_write(struct childless *childless,
+				       const char *page,
+				       size_t count)
+{
+	unsigned long tmp;
+	char *p = (char *) page;
+
+	tmp = simple_strtoul(p, &p, 10);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	if (tmp > INT_MAX)
+		return -ERANGE;
+
+	childless->storeme = tmp;
+
+	return count;
+}
+
+static ssize_t childless_description_read(struct childless *childless,
+					  char *page)
+{
+	return sprintf(page,
+"[01-childless]\n"
+"\n"
+"The childless subsystem is the simplest possible subsystem in\n"
+"configfs.  It does not support the creation of child config_items.\n"
+"It only has a few attributes.  In fact, it isn't much different\n"
+"than a directory in /proc.\n");
+}
+
+CHILDLESS_ATTR_RO(showme, childless_showme_read);
+CHILDLESS_ATTR(storeme, S_IRUGO | S_IWUSR, childless_storeme_read,
+	       childless_storeme_write);
+CHILDLESS_ATTR_RO(description, childless_description_read);
+
+static struct configfs_attribute *childless_attrs[] = {
+	&childless_attr_showme.attr,
+	&childless_attr_storeme.attr,
+	&childless_attr_description.attr,
+	NULL,
+};
+
+CONFIGFS_ATTR_OPS(childless);
+static struct configfs_item_operations childless_item_ops = {
+	.show_attribute		= childless_attr_show,
+	.store_attribute	= childless_attr_store,
+};
+
+static struct config_item_type childless_type = {
+	.ct_item_ops	= &childless_item_ops,
+	.ct_attrs	= childless_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct childless childless_subsys = {
+	.subsys = {
+		.su_group = {
+			.cg_item = {
+				.ci_namebuf = "01-childless",
+				.ci_type = &childless_type,
+			},
+		},
+	},
+};
+
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * 02-simple-children
+ *
+ * This example merely has a simple one-attribute child.  Note that
+ * there is no extra attribute structure, as the child's attribute is
+ * known from the get-go.  Also, there is no container for the
+ * subsystem, as it has no attributes of its own.
+ */
+
+struct simple_child {
+	struct config_item item;
+	int storeme;
+};
+
+static inline struct simple_child *to_simple_child(struct config_item *item)
+{
+	return item ? container_of(item, struct simple_child, item) : NULL;
+}
+
+static struct configfs_attribute simple_child_attr_storeme = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "storeme",
+	.ca_mode = S_IRUGO | S_IWUSR,
+};
+
+static struct configfs_attribute *simple_child_attrs[] = {
+	&simple_child_attr_storeme,
+	NULL,
+};
+
+static ssize_t simple_child_attr_show(struct config_item *item,
+				      struct configfs_attribute *attr,
+				      char *page)
+{
+	ssize_t count;
+	struct simple_child *simple_child = to_simple_child(item);
+
+	count = sprintf(page, "%d\n", simple_child->storeme);
+
+	return count;
+}
+
+static ssize_t simple_child_attr_store(struct config_item *item,
+				       struct configfs_attribute *attr,
+				       const char *page, size_t count)
+{
+	struct simple_child *simple_child = to_simple_child(item);
+	unsigned long tmp;
+	char *p = (char *) page;
+
+	tmp = simple_strtoul(p, &p, 10);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	if (tmp > INT_MAX)
+		return -ERANGE;
+
+	simple_child->storeme = tmp;
+
+	return count;
+}
+
+static void simple_child_release(struct config_item *item)
+{
+	kfree(to_simple_child(item));
+}
+
+static struct configfs_item_operations simple_child_item_ops = {
+	.release		= simple_child_release,
+	.show_attribute		= simple_child_attr_show,
+	.store_attribute	= simple_child_attr_store,
+};
+
+static struct config_item_type simple_child_type = {
+	.ct_item_ops	= &simple_child_item_ops,
+	.ct_attrs	= simple_child_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+
+struct simple_children {
+	struct config_group group;
+};
+
+static inline struct simple_children *to_simple_children(struct config_item *item)
+{
+	return item ? container_of(to_config_group(item), struct simple_children, group) : NULL;
+}
+
+static struct config_item *simple_children_make_item(struct config_group *group, const char *name)
+{
+	struct simple_child *simple_child;
+
+	simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL);
+	if (!simple_child)
+		return ERR_PTR(-ENOMEM);
+
+	config_item_init_type_name(&simple_child->item, name,
+				   &simple_child_type);
+
+	simple_child->storeme = 0;
+
+	return &simple_child->item;
+}
+
+static struct configfs_attribute simple_children_attr_description = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "description",
+	.ca_mode = S_IRUGO,
+};
+
+static struct configfs_attribute *simple_children_attrs[] = {
+	&simple_children_attr_description,
+	NULL,
+};
+
+static ssize_t simple_children_attr_show(struct config_item *item,
+					 struct configfs_attribute *attr,
+					 char *page)
+{
+	return sprintf(page,
+"[02-simple-children]\n"
+"\n"
+"This subsystem allows the creation of child config_items.  These\n"
+"items have only one attribute that is readable and writeable.\n");
+}
+
+static void simple_children_release(struct config_item *item)
+{
+	kfree(to_simple_children(item));
+}
+
+static struct configfs_item_operations simple_children_item_ops = {
+	.release	= simple_children_release,
+	.show_attribute	= simple_children_attr_show,
+};
+
+/*
+ * Note that, since no extra work is required on ->drop_item(),
+ * no ->drop_item() is provided.
+ */
+static struct configfs_group_operations simple_children_group_ops = {
+	.make_item	= simple_children_make_item,
+};
+
+static struct config_item_type simple_children_type = {
+	.ct_item_ops	= &simple_children_item_ops,
+	.ct_group_ops	= &simple_children_group_ops,
+	.ct_attrs	= simple_children_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct configfs_subsystem simple_children_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "02-simple-children",
+			.ci_type = &simple_children_type,
+		},
+	},
+};
+
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * 03-group-children
+ *
+ * This example reuses the simple_children group from above.  However,
+ * the simple_children group is not the subsystem itself, it is a
+ * child of the subsystem.  Creation of a group in the subsystem creates
+ * a new simple_children group.  That group can then have simple_child
+ * children of its own.
+ */
+
+static struct config_group *group_children_make_group(struct config_group *group, const char *name)
+{
+	struct simple_children *simple_children;
+
+	simple_children = kzalloc(sizeof(struct simple_children),
+				  GFP_KERNEL);
+	if (!simple_children)
+		return ERR_PTR(-ENOMEM);
+
+	config_group_init_type_name(&simple_children->group, name,
+				    &simple_children_type);
+
+	return &simple_children->group;
+}
+
+static struct configfs_attribute group_children_attr_description = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "description",
+	.ca_mode = S_IRUGO,
+};
+
+static struct configfs_attribute *group_children_attrs[] = {
+	&group_children_attr_description,
+	NULL,
+};
+
+static ssize_t group_children_attr_show(struct config_item *item,
+					struct configfs_attribute *attr,
+					char *page)
+{
+	return sprintf(page,
+"[03-group-children]\n"
+"\n"
+"This subsystem allows the creation of child config_groups.  These\n"
+"groups are like the subsystem simple-children.\n");
+}
+
+static struct configfs_item_operations group_children_item_ops = {
+	.show_attribute	= group_children_attr_show,
+};
+
+/*
+ * Note that, since no extra work is required on ->drop_item(),
+ * no ->drop_item() is provided.
+ */
+static struct configfs_group_operations group_children_group_ops = {
+	.make_group	= group_children_make_group,
+};
+
+static struct config_item_type group_children_type = {
+	.ct_item_ops	= &group_children_item_ops,
+	.ct_group_ops	= &group_children_group_ops,
+	.ct_attrs	= group_children_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct configfs_subsystem group_children_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "03-group-children",
+			.ci_type = &group_children_type,
+		},
+	},
+};
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * We're now done with our subsystem definitions.
+ * For convenience in this module, here's a list of them all.  It
+ * allows the init function to easily register them.  Most modules
+ * will only have one subsystem, and will only call register_subsystem
+ * on it directly.
+ */
+static struct configfs_subsystem *example_subsys[] = {
+	&childless_subsys.subsys,
+	&simple_children_subsys,
+	&group_children_subsys,
+	NULL,
+};
+
+static int __init configfs_example_init(void)
+{
+	int ret;
+	int i;
+	struct configfs_subsystem *subsys;
+
+	for (i = 0; example_subsys[i]; i++) {
+		subsys = example_subsys[i];
+
+		config_group_init(&subsys->su_group);
+		mutex_init(&subsys->su_mutex);
+		ret = configfs_register_subsystem(subsys);
+		if (ret) {
+			printk(KERN_ERR "Error %d while registering subsystem %s\n",
+			       ret,
+			       subsys->su_group.cg_item.ci_namebuf);
+			goto out_unregister;
+		}
+	}
+
+	return 0;
+
+out_unregister:
+	for (; i >= 0; i--) {
+		configfs_unregister_subsystem(example_subsys[i]);
+	}
+
+	return ret;
+}
+
+static void __exit configfs_example_exit(void)
+{
+	int i;
+
+	for (i = 0; example_subsys[i]; i++) {
+		configfs_unregister_subsystem(example_subsys[i]);
+	}
+}
+
+module_init(configfs_example_init);
+module_exit(configfs_example_exit);
+MODULE_LICENSE("GPL");
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 80e193d82e2..0d5394920a3 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -26,6 +26,12 @@ Mailing list: linux-ext4@vger.kernel.org
 
     git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
 
+  - Note that it is highly important to install the mke2fs.conf file
+    that comes with the e2fsprogs 1.41.x sources in /etc/mke2fs.conf. If
+    you have edited the /etc/mke2fs.conf file installed on your system,
+    you will need to merge your changes with the version from e2fsprogs
+    1.41.x.
+
   - Create a new filesystem using the ext4dev filesystem type:
 
     	# mke2fs -t ext4dev /dev/hda1
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt
index e79ee2db183..ac2a261c5f7 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@@ -40,7 +40,7 @@ Web site
 ========
 
 There is plenty of additional information on the linux-ntfs web site
-at http://linux-ntfs.sourceforge.net/
+at http://www.linux-ntfs.org/
 
 The web site has a lot of additional information, such as a comprehensive
 FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS
@@ -272,7 +272,7 @@ And you would know that /dev/hda2 has a size of 37768814 - 4209030 + 1 =
 For Win2k and later dynamic disks, you can for example use the ldminfo utility
 which is part of the Linux LDM tools (the latest version at the time of
 writing is linux-ldm-0.0.8.tar.bz2).  You can download it from:
-	http://linux-ntfs.sourceforge.net/downloads.html
+	http://www.linux-ntfs.org/
 Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go
 into it (cd linux-ldm-0.0.8) and change to the test directory (cd test).  You
 will find the precompiled (i386) ldminfo utility there.  NOTE: You will not be
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 64557821ee5..f566ad9bcb7 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1339,6 +1339,25 @@ Enables/Disables the protection of the per-process proc entries "maps" and
 "smaps".  When enabled, the contents of these files are visible only to
 readers that are allowed to ptrace() the given process.
 
+msgmni
+------
+
+Maximum number of message queue ids on the system.
+This value scales to the amount of lowmem. It is automatically recomputed
+upon memory add/remove or ipc namespace creation/removal.
+When a value is written into this file, msgmni's value becomes fixed, i.e. it
+is not recomputed anymore when one of the above events occurs.
+Use auto_msgmni to change this behavior.
+
+auto_msgmni
+-----------
+
+Enables/Disables automatic recomputing of msgmni upon memory add/remove or
+upon ipc namespace creation/removal (see the msgmni description above).
+Echoing "1" into this file enables msgmni automatic recomputing.
+Echoing "0" turns it off.
+auto_msgmni default value is 1.
+
 
 2.4 /proc/sys/vm - The virtual memory subsystem
 -----------------------------------------------
@@ -2394,6 +2413,8 @@ The following 4 memory types are supported:
   - (bit 1) anonymous shared memory
   - (bit 2) file-backed private memory
   - (bit 3) file-backed shared memory
+  - (bit 4) ELF header pages in file-backed private memory areas (it is
+            effective only if the bit 2 is cleared)
 
   Note that MMIO pages such as frame buffer are never dumped and vDSO pages
   are always dumped regardless of the bitmask status.
diff --git a/Documentation/filesystems/quota.txt b/Documentation/filesystems/quota.txt
index a590c4093ef..5e8de25bf0f 100644
--- a/Documentation/filesystems/quota.txt
+++ b/Documentation/filesystems/quota.txt
@@ -3,14 +3,14 @@ Quota subsystem
 ===============
 
 Quota subsystem allows system administrator to set limits on used space and
-number of used inodes (inode is a filesystem structure which is associated
-with each file or directory) for users and/or groups. For both used space and
-number of used inodes there are actually two limits. The first one is called
-softlimit and the second one hardlimit.  An user can never exceed a hardlimit
-for any resource. User is allowed to exceed softlimit but only for limited
-period of time. This period is called "grace period" or "grace time". When
-grace time is over, user is not able to allocate more space/inodes until he
-frees enough of them to get below softlimit.
+number of used inodes (inode is a filesystem structure which is associated with
+each file or directory) for users and/or groups. For both used space and number
+of used inodes there are actually two limits. The first one is called softlimit
+and the second one hardlimit.  An user can never exceed a hardlimit for any
+resource (unless he has CAP_SYS_RESOURCE capability). User is allowed to exceed
+softlimit but only for limited period of time. This period is called "grace
+period" or "grace time". When grace time is over, user is not able to allocate
+more space/inodes until he frees enough of them to get below softlimit.
 
 Quota limits (and amount of grace time) are set independently for each
 filesystem.
@@ -53,6 +53,12 @@ in parentheses):
 		QUOTA_NL_BSOFTLONGWARN - space (block) softlimit is exceeded
 		  longer than given grace period.
 		QUOTA_NL_BSOFTWARN - space (block) softlimit
+	  - four warnings are also defined for the event when user stops
+	    exceeding some limit:
+		QUOTA_NL_IHARDBELOW - inode hardlimit
+		QUOTA_NL_ISOFTBELOW - inode softlimit
+		QUOTA_NL_BHARDBELOW - space (block) hardlimit
+		QUOTA_NL_BSOFTBELOW - space (block) softlimit
         QUOTA_NL_A_DEV_MAJOR (u32)
 	  - major number of a device with the affected filesystem
         QUOTA_NL_A_DEV_MINOR (u32)
diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt
index 540e9e7f59c..6a0d70a22f0 100644
--- a/Documentation/filesystems/ubifs.txt
+++ b/Documentation/filesystems/ubifs.txt
@@ -57,7 +57,7 @@ Similarly to JFFS2, UBIFS supports on-the-flight compression which makes
 it possible to fit quite a lot of data to the flash.
 
 Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts.
-It does not need stuff like ckfs.ext2. UBIFS automatically replays its
+It does not need stuff like fsck.ext2. UBIFS automatically replays its
 journal and recovers from crashes, ensuring that the on-flash data
 structures are consistent.
 
diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt
index f218f616ff6..d330fe3103d 100644
--- a/Documentation/ftrace.txt
+++ b/Documentation/ftrace.txt
@@ -4,6 +4,7 @@
 Copyright 2008 Red Hat Inc.
    Author:   Steven Rostedt <srostedt@redhat.com>
   License:   The GNU Free Documentation License, Version 1.2
+               (dual licensed under the GPL v2)
 Reviewers:   Elias Oltmanns, Randy Dunlap, Andrew Morton,
 	     John Kacur, and David Teigland.
 
diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737
index 8f446070e64..001d2e70bc1 100644
--- a/Documentation/hwmon/dme1737
+++ b/Documentation/hwmon/dme1737
@@ -10,6 +10,10 @@ Supported chips:
     Prefix: 'sch311x'
     Addresses scanned: none, address read from Super-I/O config space
     Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
+  * SMSC SCH5027
+    Prefix: 'sch5027'
+    Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+    Datasheet: Provided by SMSC upon request and under NDA
 
 Authors:
     Juerg Haefliger <juergh@gmail.com>
@@ -22,34 +26,36 @@ Module Parameters
 			and PWM output control functions. Using this parameter
 			shouldn't be required since the BIOS usually takes care
 			of this.
-
-Note that there is no need to use this parameter if the driver loads without
-complaining. The driver will say so if it is necessary.
+* probe_all_addr: bool	Include non-standard LPC addresses 0x162e and 0x164e
+			when probing for ISA devices. This is required for the
+			following boards:
+			- VIA EPIA SN18000
 
 
 Description
 -----------
 
 This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O
-chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote
-diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up
-to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM
-outputs pwm[1-3,5-6] for controlling fan speeds both manually and
+SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC
+SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors
+temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
+1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
+up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
 automatically.
 
-For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6]
-and pwm[3,5-6] are optional features and their availability depends on the
-configuration of the chip. The driver will detect which features are present
-during initialization and create the sysfs attributes accordingly.
+For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present.
+Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
+the configuration of the chip. The driver will detect which features are
+present during initialization and create the sysfs attributes accordingly.
 
 For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
 pwm[5-6] don't exist.
 
-The hardware monitoring features of the DME1737 and A8000 are only accessible
-via SMBus, while the SCH311x only provides access via the ISA bus. The driver
-will therefore register itself as an I2C client driver if it detects a DME1737
-or A8000 and as a platform driver if it detects a SCH311x chip.
+The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
+accessible via SMBus, while the SCH311x only provides access via the ISA bus.
+The driver will therefore register itself as an I2C client driver if it detects
+a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x
+chip.
 
 
 Voltage Monitoring
@@ -60,6 +66,7 @@ scaling resistors. The values returned by the driver therefore reflect true
 millivolts and don't need scaling. The voltage inputs are mapped as follows
 (the last column indicates the input ranges):
 
+DME1737, A8000:
 	in0: +5VTR	(+5V standby)		0V - 6.64V
 	in1: Vccp	(processor core)	0V - 3V
 	in2: VCC	(internal +3.3V)	0V - 4.38V
@@ -68,6 +75,24 @@ millivolts and don't need scaling. The voltage inputs are mapped as follows
 	in5: VTR	(+3.3V standby)		0V - 4.38V
 	in6: Vbat	(+3.0V)			0V - 4.38V
 
+SCH311x:
+	in0: +2.5V				0V - 6.64V
+	in1: Vccp	(processor core)	0V - 2V
+	in2: VCC	(internal +3.3V)	0V - 4.38V
+	in3: +5V				0V - 6.64V
+	in4: +12V				0V - 16V
+	in5: VTR	(+3.3V standby)		0V - 4.38V
+	in6: Vbat	(+3.0V)			0V - 4.38V
+
+SCH5027:
+	in0: +5VTR	(+5V standby)		0V - 6.64V
+	in1: Vccp	(processor core)	0V - 3V
+	in2: VCC	(internal +3.3V)	0V - 4.38V
+	in3: V2_IN				0V - 1.5V
+	in4: V1_IN				0V - 1.5V
+	in5: VTR	(+3.3V standby)		0V - 4.38V
+	in6: Vbat	(+3.0V)			0V - 4.38V
+
 Each voltage input has associated min and max limits which trigger an alarm
 when crossed.
 
diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem
index 2fefaf582a4..e98bdfea346 100644
--- a/Documentation/hwmon/ibmaem
+++ b/Documentation/hwmon/ibmaem
@@ -1,8 +1,11 @@
 Kernel driver ibmaem
 ======================
 
+This driver talks to the IBM Systems Director Active Energy Manager, known
+henceforth as AEM.
+
 Supported systems:
-  * Any recent IBM System X server with Active Energy Manager support.
+  * Any recent IBM System X server with AEM support.
     This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
     x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
     driver ("ipmi-si") needs to be loaded for this driver to do anything.
@@ -14,24 +17,22 @@ Author: Darrick J. Wong
 Description
 -----------
 
-This driver implements sensor reading support for the energy and power
-meters available on various IBM System X hardware through the BMC.  All
-sensor banks will be exported as platform devices; this driver can talk
-to both v1 and v2 interfaces.  This driver is completely separate from the
-older ibmpex driver.
+This driver implements sensor reading support for the energy and power meters
+available on various IBM System X hardware through the BMC.  All sensor banks
+will be exported as platform devices; this driver can talk to both v1 and v2
+interfaces.  This driver is completely separate from the older ibmpex driver.
 
-The v1 AEM interface has a simple set of features to monitor energy use.
-There is a register that displays an estimate of raw energy consumption
-since the last BMC reset, and a power sensor that returns average power
-use over a configurable interval.
+The v1 AEM interface has a simple set of features to monitor energy use.  There
+is a register that displays an estimate of raw energy consumption since the
+last BMC reset, and a power sensor that returns average power use over a
+configurable interval.
 
-The v2 AEM interface is a bit more sophisticated, being able to present
-a wider range of energy and power use registers, the power cap as
-set by the AEM software, and temperature sensors.
+The v2 AEM interface is a bit more sophisticated, being able to present a wider
+range of energy and power use registers, the power cap as set by the AEM
+software, and temperature sensors.
 
 Special Features
 ----------------
 
-The "power_cap" value displays the current system power cap, as set by
-the Active Energy Manager software.  Setting the power cap from the host
-is not currently supported.
+The "power_cap" value displays the current system power cap, as set by the AEM
+software.  Setting the power cap from the host is not currently supported.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index f4ce1fdbeff..3496b7020e7 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -6,12 +6,14 @@ Supported chips:
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Publicly available at the ITE website
-               http://www.ite.com.tw/
+               http://www.ite.com.tw/product_info/file/pc/IT8705F_V.0.4.1.pdf
   * IT8712F
     Prefix: 'it8712'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Publicly available at the ITE website
-               http://www.ite.com.tw/
+               http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf
+               http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf
+               http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf
   * IT8716F/IT8726F
     Prefix: 'it8716'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -90,14 +92,13 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you
 can't have both on a given board.
 
 The IT8716F, IT8718F and later IT8712F revisions have support for
-2 additional fans. They are supported by the driver for the IT8716F and
-IT8718F but not for the IT8712F
+2 additional fans. The additional fans are supported by the driver.
 
 The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional
 16-bit tachometer counters for fans 1 to 3. This is better (no more fan
 clock divider mess) but not compatible with the older chips and
-revisions. For now, the driver only uses the 16-bit mode on the
-IT8716F and IT8718F.
+revisions. The 16-bit tachometer mode is enabled by the driver when one
+of the above chips is detected.
 
 The IT8726F is just bit enhanced IT8716F with additional hardware
 for AMD power sequencing. Therefore the chip will appear as IT8716F
diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85
index 9549237530c..6d41db7f17f 100644
--- a/Documentation/hwmon/lm85
+++ b/Documentation/hwmon/lm85
@@ -96,11 +96,6 @@ initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has
 confirmed this "bug". The ADT7463 is reported to work as described in the
 documentation. The current lm85 driver does not show the offset register.
 
-The ADT7463 has a THERM asserted counter. This counter has a 22.76ms
-resolution and a range of 5.8 seconds. The driver implements a 32-bit
-accumulator of the counter value to extend the range to over a year. The
-counter will stay at it's max value until read.
-
 See the vendor datasheets for more information. There is application note
 from National (AN-1260) with some additional information about the LM85.
 The Analog Devices datasheet is very detailed and describes a procedure for
@@ -206,13 +201,15 @@ Configuration choices:
 
 The National LM85's have two vendor specific configuration
 features. Tach. mode and Spinup Control. For more details on these,
-see the LM85 datasheet or Application Note AN-1260.
+see the LM85 datasheet or Application Note AN-1260. These features
+are not currently supported by the lm85 driver.
 
 The Analog Devices ADM1027 has several vendor specific enhancements.
 The number of pulses-per-rev of the fans can be set, Tach monitoring
 can be optimized for PWM operation, and an offset can be applied to
 the temperatures to compensate for systemic errors in the
-measurements.
+measurements. These features are not currently supported by the lm85
+driver.
 
 In addition to the ADM1027 features, the ADT7463 also has Tmin control
 and THERM asserted counts. Automatic Tmin control acts to adjust the
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index 880a59f53da..6ee36dbafd6 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -40,10 +40,6 @@ Module Parameters
   (default is 1)
   Use 'init=0' to bypass initializing the chip.
   Try this if your computer crashes when you load the module.
-* reset: int
-  (default is 0)
-  The driver used to reset the chip on load, but does no more. Use
-  'reset=1' to restore the old behavior. Report if you need to do this.
 
 Description
 -----------
diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d
index f153b2f6d62..a67d3b7a709 100644
--- a/Documentation/hwmon/w83791d
+++ b/Documentation/hwmon/w83791d
@@ -22,6 +22,7 @@ Credits:
 
 Additional contributors:
     Sven Anders <anders@anduras.de>
+    Marc Hulsman <m.hulsman@tudelft.nl>
 
 Module Parameters
 -----------------
@@ -67,9 +68,8 @@ on until the temperature falls below the Hysteresis value.
 
 Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
 triggered if the rotation speed has dropped below a programmable limit. Fan
-readings can be divided by a programmable divider (1, 2, 4, 8 for fan 1/2/3
-and 1, 2, 4, 8, 16, 32, 64 or 128 for fan 4/5) to give the readings more
-range or accuracy.
+readings can be divided by a programmable divider (1, 2, 4, 8, 16,
+32, 64 or 128 for all fans) to give the readings more range or accuracy.
 
 Voltage sensors (also known as IN sensors) report their values in millivolts.
 An alarm is triggered if the voltage has crossed a programmable minimum
diff --git a/Documentation/ia64/Makefile b/Documentation/ia64/Makefile
new file mode 100644
index 00000000000..b75db69ec48
--- /dev/null
+++ b/Documentation/ia64/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := aliasing-test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt
index 3bb5f466a90..1c6b545635a 100644
--- a/Documentation/ioctl-number.txt
+++ b/Documentation/ioctl-number.txt
@@ -105,7 +105,6 @@ Code	Seq#	Include File		Comments
 'T'	all	linux/soundcard.h	conflict!
 'T'	all	asm-i386/ioctls.h	conflict!
 'U'	00-EF	linux/drivers/usb/usb.h
-'U'	F0-FF	drivers/usb/auerswald.c
 'V'	all	linux/vt.h
 'W'	00-1F	linux/watchdog.h	conflict!
 'W'	00-1F	linux/wanrouter.h	conflict!
diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index 488c77fa3aa..0775cf4798b 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
 fork. So if you have any comments or updates for this file, please try
 to update the original English file first.
 
-Last Updated: 2007/11/16
+Last Updated: 2008/08/21
 ==================================
 �れ��
-linux-2.6.24/Documentation/HOWTO
+linux-2.6.27/Documentation/HOWTO
 �和訳��。
 
 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2007/11/10
+翻訳日： 2008/8/5
 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
 校正者： �倉�ん <nbh--mats at nifty dot com>
          �林 雅典�ん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -287,13 +287,15 @@ Linux カーãƒ�ルã�®é–‹ç™ºãƒ—ロセスã�¯ç�¾åœ¨å¹¾ã�¤ã�‹ã�®ç•°ã�ªã‚‹ãƒ¡ã‚¤ãƒ³ã‚
     �安定��状態��る�判断�����リリース�れ��。目標�毎週新
     �� -rc カー�ルをリリース�る����。
 
-   - 以下� URL �� -rc リリース�存在�る既知�後戻り�題�リスト
-     �追跡�れ��-
-     http://kernelnewbies.org/known_regressions
-
   - ��プロセス�カー�ル� 「準備������考�られる��継続��
     �。��プロセス����� 6週間継続���。
 
+  - �リリース��既知�後戻り�題(regression: ��リリース�中�新�
+    �作り込�れ��題を指�) ���都度 Linux-kernel メーリングリスト
+    �投稿�れ��。ゴール�����カー�ル� 「準備������宣言
+    �る����リスト�長�をゼロ�減ら��������実���数個�
+    後戻り�題�リリース時�����残�������。
+
 Andrew Morton � Linux-kernel メーリングリスト�カー�ルリリース���
 �書����を���言�������価値��り��-
   「カー�ル���リリース�れる��誰も知り��ん。���ら��れ��
@@ -303,18 +305,20 @@ Andrew Morton ã�Œ Linux-kernel メーリングリストã�«ã‚«ãƒ¼ãƒ�ルリリーã
 2.6.x.y -stable カー�ルツリー
 ---------------------------
 
-�ージョン�4�目�数字����カー�ル� -stable カー�ル��。�れ�
-��2.6.x カー�ル�見����セキュリティ�題や�大�後戻り�対�る比
-較的������修正���れ��。
+�ージョン番��4��数字�分�れ��るカー�ル� -stable カー�ル��。
+�れ���2.6.x カー�ル�見����セキュリティ�題や�大�後戻り�対
+�る比較的������修正���れ��。
 
 �れ��開発/実験的�ージョン�テスト��力�る���興味�無��
 最新�安定��カー�ルを使���ユーザ�推奨�るブラン���。
 
-も��2.6.x.y カー�ル�存在���場����番��一番大�� 2.6.x
-�最新�安定版カー�ル��。
+も��2.6.x.y カー�ル�存在���場����番��一番大�� 2.6.x �
+最新�安定版カー�ル��。
 
-2.6.x.y � "stable" �ーム <stable@kernel.org> �メンテ�れ��り��
-���隔週�リリース�れ����。
+2.6.x.y � "stable" �ーム <stable@kernel.org> �メンテ�れ��り�必
+��応��リリース�れ��。通常�リリース期間� 2週間毎����差�迫�
+��題���れ�も�少�長��る��も�り��。セキュリティ関連��題
+�場���れ�対�������場�����リリース��れ��。
 
 カー�ルツリー�入���る�Documentation/stable_kernel_rules.txt ファ
 イル����よ��種類�変更� -stable ツリー���入れ�能����リ
@@ -341,7 +345,9 @@ linux-kernel メーリングリストã�§å�Žé›†ã�•ã‚Œã�Ÿå¤šæ•°ã�®ãƒ‘ッãƒ�ã�¨å�Œæ
 メインライン�入れるよ�� Linus �プッシュ���。
 
 メインカー�ルツリー���る��� Linus ��る�������新��パッ
-�� -mm ツリー�テスト�れる���強�推奨�れ��。
+�� -mm ツリー�テスト�れる���強�推奨�れ����。マージウィン
+ドウ�開��� -mm ツリー��れ����パッ��メインライン�マージ�
+れる���困難��り��。
 
 �れら�カー�ル�安定��動作���システム���使�����切���
 り��ん��カー�ルブラン��中�もも��も動作�リスク�高�も���。
@@ -395,13 +401,15 @@ linux-kernel メーリングリストã�§å�Žé›†ã�•ã‚Œã�Ÿå¤šæ•°ã�®ãƒ‘ッãƒ�ã�¨å�Œæ
     - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
 	git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
 
-    - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+    - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
 	git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 
+    - x86, Ingo Molnar <mingo@elte.hu>
+	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+
   quilt ツリー-
-    - USB, PCI ドライ�コア� I2C, Greg Kroah-Hartman <gregkh@suse.de>
+    - USB, ドライ�コア� I2C, Greg Kroah-Hartman <gregkh@suse.de>
 	kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
-    - x86-64 � i386 �仲間 Andi Kleen <ak@suse.de>
 
   ��他�カー�ルツリー� http://git.kernel.org/ � MAINTAINERS ファ
   イル�一覧表��り��。
@@ -412,13 +420,32 @@ linux-kernel メーリングリストã�§å�Žé›†ã�•ã‚Œã�Ÿå¤šæ•°ã�®ãƒ‘ッãƒ�ã�¨å�Œæ
 bugzilla.kernel.org � Linux カー�ル開発者�カー�ル��グを追跡�る
 場所��。ユーザ�見����グ�全�を��ツール�報告�����。
 �� kernel bugzilla を使���詳細��以下を�照������-
-	http://test.kernel.org/bugzilla/faq.html
-
+	http://bugzilla.kernel.org/page.cgi?id=faq.html
 メインカー�ルソースディレクトリ��るファイル REPORTING-BUGS �カー�
 ル�グら��も�������レ�ート�る��良�テンプレート��り��
 題�追跡を助�る���カー�ル開発者�����ん�情報�必�����詳
 細�書�れ����。
 
+�グレ�ート�管�
+-------------------
+
+�����ッキング�スキルを訓練�る最高�方法������他人�レ�ー
+ト���グを修正�る����り��。����カー�ルをより安定化��る
+��寄与�る��������������� �実��題を修正�る��を
+学��自分�スキルも強化�����他�開発者�����存在�気���
+��。�グを修正�る����多��開発者�中�ら自分�功績を��る最善
+��������ら多��人�他人��グ�修正�時間を浪費�る��を好�
+���ら��。
+
+���レ�ート�れ��グ����仕事を�る�����
+http://bugzilla.kernel.org �行������。も�今後��グレ�ート�
+���アド�イスを�������れ��bugme-new メーリングリスト(新�
+��グレ�ート������メール�れる) ��� bugme-janitor メーリン
+グリスト(bugzilla �変更毎����メール�れる)を購読����。
+
+	http://lists.linux-foundation.org/mailman/listinfo/bugme-new
+	http://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
+
 メーリングリスト
 -------------
 
diff --git a/Documentation/ja_JP/SubmitChecklist b/Documentation/ja_JP/SubmitChecklist
new file mode 100644
index 00000000000..6c42e071d72
--- /dev/null
+++ b/Documentation/ja_JP/SubmitChecklist
@@ -0,0 +1,111 @@
+NOTE:
+This is a version of Documentation/SubmitChecklist into Japanese.
+This document is maintained by Takenori Nagano <t-nagano@ah.jp.nec.com>
+and the JF Project team <http://www.linux.or.jp/JF/>.
+If you find any difference between this document and the original file
+or a problem with the translation,
+please contact the maintainer of this file or JF project.
+
+Please also note that the purpose of this file is to be easier to read
+for non English (read: Japanese) speakers and is not intended as a
+fork. So if you have any comments or updates of this file, please try
+to update the original English file first.
+
+Last Updated: 2008/07/14
+==================================
+�れ��
+linux-2.6.26/Documentation/SubmitChecklist �和訳��。
+
+翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
+翻訳日： 2008/07/14
+翻訳者： Takenori Nagano <t-nagano at ah dot jp dot nec dot com>
+校正者： Masanori Kobayashi �ん <zap03216 at nifty dot ne dot jp>
+==================================
+
+
+Linux カー�ルパッ�投稿者���ェックリスト
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+本書���パッ�をより素早��り込ん�もら���開発者�実践���基本的�事柄
+を����紹介���。����る全��事柄��Documentation/SubmittingPatches
+���Linuxカー�ルパッ�投稿�際���心得を補足�るも���。
+
+ 1: 妥当�CONFIGオプションや変更�れ�CONFIGオプション���り =y, =m, =n
+    全��正��ビルド��る��を確�������。��際�gcc��リンカ�
+    warningやerrorを出�������も確�������。
+
+ 2: allnoconfig, allmodconfig オプションを用��正��ビルド��る��を
+    確�������。
+
+ 3: 手許�クロスコンパイルツールやOSDL�PLM�よ��も�を用���複数�
+    アーキテク�ャ����も正��ビルド��る��を確�������。
+
+ 4: 64bit長�'unsigned long'を使用���るppc64��クロスコンパイル��
+    �ェック��当�アーキテク�ャ��。
+
+ 5: カー�ルコーディングスタイル�準拠���る����確�������(!)
+
+ 6: CONFIGオプション�追加・変更を��場����CONFIGメニュー�壊れ����
+    ��を確�������。
+
+ 7: 新��Kconfig�オプションを追加�る際���必���helpも記述������。
+
+ 8: �切�Kconfig��存関係を考���ら慎���ェック������。
+    ������作業�マシンを使��テスト���ん�行�����も困難��。
+    ���やる���自分�頭�考�る����。
+
+ 9: sparseを利用���ゃん���コード�ェックを������。
+
+10: 'make checkstack' � 'make namespacecheck' を利用���題�発見�れ�ら
+    修正������。'make checkstack' �明示的��題を示���ん���れ�
+    １��関数�512�イトより大��スタックを使���れ��修正���候補�
+    �り��。
+
+11: グロー�ル�kernel API を説明�る kernel-doc をソース�中��������。
+    ( static�関数�����必須���り��ん�����もら��も�構�� )
+    ����'make htmldocs' も��� 'make mandocs' を利用��追記��
+    ドキュメント��ェックを行���題�見����場���修正を行������。
+
+12: CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT, CONFIG_DEBUG_SLAB,
+    CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES, CONFIG_DEBUG_SPINLOCK,
+    CONFIG_DEBUG_SPINLOCK_SLEEP �れら全�を�時�有効���動作確�を
+    行������。
+
+13: CONFIG_SMP, CONFIG_PREEMPT を有効���場��無効���場��両方�
+    ビルド��上�動作確�を行������。
+
+14: も�パッ��ディスク�I/O性能���影響を与�るよ���れ��
+    'CONFIG_LBD'オプションを有効���場��無効���場��両方�
+    テストを実施��������。
+
+15: lockdep�機能を全�有効���上��全��コードパスを評価������。
+
+16: /proc �新��エントリを追加��場����Documentation/ �下�
+    必�ドキュメントを追加������。
+
+17: 新��ブートパラメータを追加��場����
+    必�Documentation/kernel-parameters.txt �説明を追加������。
+
+18: 新��module�パラメータを追加��場����MODULE_PARM_DESC()を
+    利用��必���説明を記述������。
+
+19: 新��userspaceインタフェースを作���場����Documentation/ABI/ �
+    Documentation/ABI/README を�考���必�ドキュメントを追加������。
+
+20: 'make headers_check'を実行��全��題�����を確�������。
+
+21: 少���もslabアロケーション�pageアロケーション�失敗��場��
+    挙動�����fault-injectionを利用��確�������。
+    Documentation/fault-injection/ を�照������。
+
+    追加��コード���り�������ら��サブシステム特有�
+    fault-injectionを追加�����良��も�れ��ん。
+
+22: 新��追加��コード��`gcc -W'�コンパイル������。
+    ��オプション�大�����メッセージを出力�����
+    "warning: comparison between signed and unsigned" �よ��メッセージ��
+    �グを見��る��役�立���。
+
+23: 投稿��パッ�� -mm パッ�セット�マージ�れ�後�全��既存�パッ�や
+    VM, VFS �よ���他�サブシステム�関�る様々�変更���時点�も共存
+    ��る��を確��るテストを行������。
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e7bea3e8530..1150444a21a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -365,6 +365,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			no delay (0).
 			Format: integer
 
+	bootmem_debug	[KNL] Enable bootmem allocator debug messages.
+
 	bttv.card=	[HW,V4L] bttv (bt848 + bt878 based grabber cards)
 	bttv.radio=	Most important insmod options are available as
 			kernel args too.
@@ -1072,6 +1074,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 			* [no]ncq: Turn on or off NCQ.
 
+			* nohrst, nosrst, norst: suppress hard, soft
+                          and both resets.
+
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 02dc748b76c..71f0fe1fc1b 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -44,7 +44,7 @@ detailed description):
 	- LCD brightness control
 	- Volume control
 	- Fan control and monitoring: fan speed, fan enable/disable
-	- Experimental: WAN enable and disable
+	- WAN enable and disable
 
 A compatibility table by model and feature is maintained on the web
 site, http://ibm-acpi.sf.net/. I appreciate any success or failure
@@ -1375,18 +1375,13 @@ with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255
 would be the safest choice, though).
 
 
-EXPERIMENTAL: WAN
------------------
+WAN
+---
 
 procfs: /proc/acpi/ibm/wan
 sysfs device attribute: wwan_enable (deprecated)
 sysfs rfkill class: switch "tpacpi_wwan_sw"
 
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
 This feature shows the presence and current state of a W-WAN (Sierra
 Wireless EV-DO) device.
 
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index b88b0ea54e9..7228369d101 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -895,6 +895,9 @@ static void handle_console_output(int fd, struct virtqueue *vq, bool timeout)
 	}
 }
 
+/* This is called when we no longer want to hear about Guest changes to a
+ * virtqueue.  This is more efficient in high-traffic cases, but it means we
+ * have to set a timer to check if any more changes have occurred. */
 static void block_vq(struct virtqueue *vq)
 {
 	struct itimerval itm;
@@ -939,6 +942,11 @@ static void handle_net_output(int fd, struct virtqueue *vq, bool timeout)
 	if (!timeout && num)
 		block_vq(vq);
 
+	/* We never quite know how long should we wait before we check the
+	 * queue again for more packets.  We start at 500 microseconds, and if
+	 * we get fewer packets than last time, we assume we made the timeout
+	 * too small and increase it by 10 microseconds.  Otherwise, we drop it
+	 * by one microsecond every time.  It seems to work well enough. */
 	if (timeout) {
 		if (num < last_timeout_num)
 			timeout_usec += 10;
@@ -1447,21 +1455,6 @@ static void configure_device(int fd, const char *tapif, u32 ipaddr)
 		err(1, "Bringing interface %s up", tapif);
 }
 
-static void get_mac(int fd, const char *tapif, unsigned char hwaddr[6])
-{
-	struct ifreq ifr;
-
-	memset(&ifr, 0, sizeof(ifr));
-	strcpy(ifr.ifr_name, tapif);
-
-	/* SIOC stands for Socket I/O Control.  G means Get (vs S for Set
-	 * above).  IF means Interface, and HWADDR is hardware address.
-	 * Simple! */
-	if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0)
-		err(1, "getting hw address for %s", tapif);
-	memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6);
-}
-
 static int get_tun_device(char tapif[IFNAMSIZ])
 {
 	struct ifreq ifr;
@@ -1531,11 +1524,8 @@ static void setup_tun_net(char *arg)
 	p = strchr(arg, ':');
 	if (p) {
 		str2mac(p+1, conf.mac);
+		add_feature(dev, VIRTIO_NET_F_MAC);
 		*p = '\0';
-	} else {
-		p = arg + strlen(arg);
-		/* None supplied; query the randomly assigned mac. */
-		get_mac(ipfd, tapif, conf.mac);
 	}
 
 	/* arg is now either an IP address or a bridge name */
@@ -1547,13 +1537,10 @@ static void setup_tun_net(char *arg)
 	/* Set up the tun device. */
 	configure_device(ipfd, tapif, ip);
 
-	/* Tell Guest what MAC address to use. */
-	add_feature(dev, VIRTIO_NET_F_MAC);
 	add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
 	/* Expect Guest to handle everything except UFO */
 	add_feature(dev, VIRTIO_NET_F_CSUM);
 	add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
-	add_feature(dev, VIRTIO_NET_F_MAC);
 	add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
 	add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
 	add_feature(dev, VIRTIO_NET_F_GUEST_ECN);
diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile
new file mode 100644
index 00000000000..6d8af1ac56c
--- /dev/null
+++ b/Documentation/networking/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := ifenslave
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c
index a1205988675..1b96ccda383 100644
--- a/Documentation/networking/ifenslave.c
+++ b/Documentation/networking/ifenslave.c
@@ -1081,7 +1081,7 @@ static int set_if_addr(char *master_ifname, char *slave_ifname)
 
 		}
 
-		ipaddr = ifr.ifr_addr.sa_data;
+		ipaddr = (unsigned char *)ifr.ifr_addr.sa_data;
 		v_print("Interface '%s': set IP %s to %d.%d.%d.%d\n",
 			slave_ifname, ifra[i].desc,
 			ipaddr[0], ipaddr[1], ipaddr[2], ipaddr[3]);
diff --git a/Documentation/pcmcia/Makefile b/Documentation/pcmcia/Makefile
new file mode 100644
index 00000000000..accde871ae7
--- /dev/null
+++ b/Documentation/pcmcia/Makefile
@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := crc32hash
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include
diff --git a/Documentation/pcmcia/crc32hash.c b/Documentation/pcmcia/crc32hash.c
index cbc36d299af..4210e5abab8 100644
--- a/Documentation/pcmcia/crc32hash.c
+++ b/Documentation/pcmcia/crc32hash.c
@@ -26,7 +26,7 @@ int main(int argc, char **argv) {
 		printf("no string passed as argument\n");
 		return -1;
 	}
-	result = crc32(argv[1], strlen(argv[1]));
+	result = crc32((unsigned char const *)argv[1], strlen(argv[1]));
 	printf("0x%x\n", result);
 	return 0;
 }
diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt
index 49adb1a3351..c40866e8b95 100644
--- a/Documentation/power/pm_qos_interface.txt
+++ b/Documentation/power/pm_qos_interface.txt
@@ -1,4 +1,4 @@
-PM quality of Service interface.
+PM Quality Of Service Interface.
 
 This interface provides a kernel and user mode interface for registering
 performance expectations by drivers, subsystems and user space applications on
@@ -7,6 +7,11 @@ one of the parameters.
 Currently we have {cpu_dma_latency, network_latency, network_throughput} as the
 initial set of pm_qos parameters.
 
+Each parameters have defined units:
+ * latency: usec
+ * timeout: usec
+ * throughput: kbs (kilo bit / sec)
+
 The infrastructure exposes multiple misc device nodes one per implemented
 parameter.  The set of parameters implement is defined by pm_qos_power_init()
 and pm_qos_params.h.  This is done because having the available parameters
diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
index a8686e5a685..c6cd4956047 100644
--- a/Documentation/power/power_supply_class.txt
+++ b/Documentation/power/power_supply_class.txt
@@ -101,6 +101,10 @@ of charge when battery became full/empty". It also could mean "value of
 charge when battery considered full/empty at given conditions (temperature,
 age)". I.e. these attributes represents real thresholds, not design values.
 
+CHARGE_COUNTER - the current charge counter (in µAh).  This could easily
+be negative; there is no empty or full value.  It is only useful for
+relative, time-based measurements.
+
 ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
 
 CAPACITY - capacity in percents.
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
new file mode 100644
index 00000000000..82b7a43aadb
--- /dev/null
+++ b/Documentation/power/regulator/consumer.txt
@@ -0,0 +1,182 @@
+Regulator Consumer Driver Interface
+===================================
+
+This text describes the regulator interface for consumer device drivers.
+Please see overview.txt for a description of the terms used in this text.
+
+
+1. Consumer Regulator Access (static & dynamic drivers)
+=======================================================
+
+A consumer driver can get access to it's supply regulator by calling :-
+
+regulator = regulator_get(dev, "Vcc");
+
+The consumer passes in it's struct device pointer and power supply ID. The core
+then finds the correct regulator by consulting a machine specific lookup table.
+If the lookup is successful then this call will return a pointer to the struct
+regulator that supplies this consumer.
+
+To release the regulator the consumer driver should call :-
+
+regulator_put(regulator);
+
+Consumers can be supplied by more than one regulator e.g. codec consumer with
+analog and digital supplies :-
+
+digital = regulator_get(dev, "Vcc");  /* digital core */
+analog = regulator_get(dev, "Avdd");  /* analog */
+
+The regulator access functions regulator_get() and regulator_put() will
+usually be called in your device drivers probe() and remove() respectively.
+
+
+2. Regulator Output Enable & Disable (static & dynamic drivers)
+====================================================================
+
+A consumer can enable it's power supply by calling:-
+
+int regulator_enable(regulator);
+
+NOTE: The supply may already be enabled before regulator_enabled() is called.
+This may happen if the consumer shares the regulator or the regulator has been
+previously enabled by bootloader or kernel board initialization code.
+
+A consumer can determine if a regulator is enabled by calling :-
+
+int regulator_is_enabled(regulator);
+
+This will return > zero when the regulator is enabled.
+
+
+A consumer can disable it's supply when no longer needed by calling :-
+
+int regulator_disable(regulator);
+
+NOTE: This may not disable the supply if it's shared with other consumers. The
+regulator will only be disabled when the enabled reference count is zero.
+
+Finally, a regulator can be forcefully disabled in the case of an emergency :-
+
+int regulator_force_disable(regulator);
+
+NOTE: this will immediately and forcefully shutdown the regulator output. All
+consumers will be powered off.
+
+
+3. Regulator Voltage Control & Status (dynamic drivers)
+======================================================
+
+Some consumer drivers need to be able to dynamically change their supply
+voltage to match system operating points. e.g. CPUfreq drivers can scale
+voltage along with frequency to save power, SD drivers may need to select the
+correct card voltage, etc.
+
+Consumers can control their supply voltage by calling :-
+
+int regulator_set_voltage(regulator, min_uV, max_uV);
+
+Where min_uV and max_uV are the minimum and maximum acceptable voltages in
+microvolts.
+
+NOTE: this can be called when the regulator is enabled or disabled. If called
+when enabled, then the voltage changes instantly, otherwise the voltage
+configuration changes and the voltage is physically set when the regulator is
+next enabled.
+
+The regulators configured voltage output can be found by calling :-
+
+int regulator_get_voltage(regulator);
+
+NOTE: get_voltage() will return the configured output voltage whether the
+regulator is enabled or disabled and should NOT be used to determine regulator
+output state. However this can be used in conjunction with is_enabled() to
+determine the regulator physical output voltage.
+
+
+4. Regulator Current Limit Control & Status (dynamic drivers)
+===========================================================
+
+Some consumer drivers need to be able to dynamically change their supply
+current limit to match system operating points. e.g. LCD backlight driver can
+change the current limit to vary the backlight brightness, USB drivers may want
+to set the limit to 500mA when supplying power.
+
+Consumers can control their supply current limit by calling :-
+
+int regulator_set_current_limit(regulator, min_uV, max_uV);
+
+Where min_uA and max_uA are the minimum and maximum acceptable current limit in
+microamps.
+
+NOTE: this can be called when the regulator is enabled or disabled. If called
+when enabled, then the current limit changes instantly, otherwise the current
+limit configuration changes and the current limit is physically set when the
+regulator is next enabled.
+
+A regulators current limit can be found by calling :-
+
+int regulator_get_current_limit(regulator);
+
+NOTE: get_current_limit() will return the current limit whether the regulator
+is enabled or disabled and should not be used to determine regulator current
+load.
+
+
+5. Regulator Operating Mode Control & Status (dynamic drivers)
+=============================================================
+
+Some consumers can further save system power by changing the operating mode of
+their supply regulator to be more efficient when the consumers operating state
+changes. e.g. consumer driver is idle and subsequently draws less current
+
+Regulator operating mode can be changed indirectly or directly.
+
+Indirect operating mode control.
+--------------------------------
+Consumer drivers can request a change in their supply regulator operating mode
+by calling :-
+
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+This will cause the core to recalculate the total load on the regulator (based
+on all it's consumers) and change operating mode (if necessary and permitted)
+to best match the current operating load.
+
+The load_uA value can be determined from the consumers datasheet. e.g.most
+datasheets have tables showing the max current consumed in certain situations.
+
+Most consumers will use indirect operating mode control since they have no
+knowledge of the regulator or whether the regulator is shared with other
+consumers.
+
+Direct operating mode control.
+------------------------------
+Bespoke or tightly coupled drivers may want to directly control regulator
+operating mode depending on their operating point. This can be achieved by
+calling :-
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+
+Direct mode will only be used by consumers that *know* about the regulator and
+are not sharing the regulator with other consumers.
+
+
+6. Regulator Events
+===================
+Regulators can notify consumers of external events. Events could be received by
+consumers under regulator stress or failure conditions.
+
+Consumers can register interest in regulator events by calling :-
+
+int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb);
+
+Consumers can uregister interest by calling :-
+
+int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb);
+
+Regulators use the kernel notifier framework to send event to thier interested
+consumers.
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
new file mode 100644
index 00000000000..c9a35665cf7
--- /dev/null
+++ b/Documentation/power/regulator/machine.txt
@@ -0,0 +1,101 @@
+Regulator Machine Driver Interface
+===================================
+
+The regulator machine driver interface is intended for board/machine specific
+initialisation code to configure the regulator subsystem. Typical things that
+machine drivers would do are :-
+
+ 1. Regulator -> Device mapping.
+ 2. Regulator supply configuration.
+ 3. Power Domain constraint setting.
+
+
+
+1. Regulator -> device mapping
+==============================
+Consider the following machine :-
+
+  Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+               |
+               +-> [Consumer B @ 3.3V]
+
+The drivers for consumers A & B must be mapped to the correct regulator in
+order to control their power supply. This mapping can be achieved in machine
+initialisation code by calling :-
+
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+				const char *supply);
+
+and is shown with the following code :-
+
+regulator_set_device_supply("Regulator-1", devB, "Vcc");
+regulator_set_device_supply("Regulator-2", devA, "Vcc");
+
+This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2
+to the 'Vcc' supply for Consumer A.
+
+
+2. Regulator supply configuration.
+==================================
+Consider the following machine (again) :-
+
+  Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+               |
+               +-> [Consumer B @ 3.3V]
+
+Regulator-1 supplies power to Regulator-2. This relationship must be registered
+with the core so that Regulator-1 is also enabled when Consumer A enables it's
+supply (Regulator-2).
+
+This relationship can be register with the core via :-
+
+int regulator_set_supply(const char *regulator, const char *regulator_supply);
+
+In this example we would use the following code :-
+
+regulator_set_supply("Regulator-2", "Regulator-1");
+
+Relationships can be queried by calling :-
+
+const char *regulator_get_supply(const char *regulator);
+
+
+3. Power Domain constraint setting.
+===================================
+Each power domain within a system has physical constraints on voltage and
+current. This must be defined in software so that the power domain is always
+operated within specifications.
+
+Consider the following machine (again) :-
+
+  Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+               |
+               +-> [Consumer B @ 3.3V]
+
+This gives us two regulators and two power domains:
+
+                   Domain 1: Regulator-2, Consumer B.
+                   Domain 2: Consumer A.
+
+Constraints can be registered by calling :-
+
+int regulator_set_platform_constraints(const char *regulator,
+	struct regulation_constraints *constraints);
+
+The example is defined as follows :-
+
+struct regulation_constraints domain_1 = {
+	.min_uV = 3300000,
+	.max_uV = 3300000,
+	.valid_modes_mask = REGULATOR_MODE_NORMAL,
+};
+
+struct regulation_constraints domain_2 = {
+	.min_uV = 1800000,
+	.max_uV = 2000000,
+	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	.valid_modes_mask = REGULATOR_MODE_NORMAL,
+};
+
+regulator_set_platform_constraints("Regulator-1", &domain_1);
+regulator_set_platform_constraints("Regulator-2", &domain_2);
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
new file mode 100644
index 00000000000..bdcb332bd7f
--- /dev/null
+++ b/Documentation/power/regulator/overview.txt
@@ -0,0 +1,171 @@
+Linux voltage and current regulator framework
+=============================================
+
+About
+=====
+
+This framework is designed to provide a standard kernel interface to control
+voltage and current regulators.
+
+The intention is to allow systems to dynamically control regulator power output
+in order to save power and prolong battery life. This applies to both voltage
+regulators (where voltage output is controllable) and current sinks (where
+current limit is controllable).
+
+(C) 2008  Wolfson Microelectronics PLC.
+Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+
+
+Nomenclature
+============
+
+Some terms used in this document:-
+
+  o Regulator    - Electronic device that supplies power to other devices.
+                   Most regulators can enable and disable their output whilst
+                   some can control their output voltage and or current.
+
+                   Input Voltage -> Regulator -> Output Voltage
+
+
+  o PMIC         - Power Management IC. An IC that contains numerous regulators
+                   and often contains other susbsystems.
+
+
+  o Consumer     - Electronic device that is supplied power by a regulator.
+                   Consumers can be classified into two types:-
+
+                   Static: consumer does not change it's supply voltage or
+                   current limit. It only needs to enable or disable it's
+                   power supply. It's supply voltage is set by the hardware,
+                   bootloader, firmware or kernel board initialisation code.
+
+                   Dynamic: consumer needs to change it's supply voltage or
+                   current limit to meet operation demands.
+
+
+  o Power Domain - Electronic circuit that is supplied it's input power by the
+                   output power of a regulator, switch or by another power
+                   domain.
+
+                   The supply regulator may be behind a switch(s). i.e.
+
+                   Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
+                              |             |
+                              |             +-> [Consumer B], [Consumer C]
+                              |
+                              +-> [Consumer D], [Consumer E]
+
+                   That is one regulator and three power domains:
+
+                   Domain 1: Switch-1, Consumers D & E.
+                   Domain 2: Switch-2, Consumers B & C.
+                   Domain 3: Consumer A.
+
+                   and this represents a "supplies" relationship:
+
+                   Domain-1 --> Domain-2 --> Domain-3.
+
+                   A power domain may have regulators that are supplied power
+                   by other regulators. i.e.
+
+                   Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
+                                |
+                                +-> [Consumer B]
+
+                   This gives us two regulators and two power domains:
+
+                   Domain 1: Regulator-2, Consumer B.
+                   Domain 2: Consumer A.
+
+                   and a "supplies" relationship:
+
+                   Domain-1 --> Domain-2
+
+
+  o Constraints  - Constraints are used to define power levels for performance
+                   and hardware protection. Constraints exist at three levels:
+
+                   Regulator Level: This is defined by the regulator hardware
+                   operating parameters and is specified in the regulator
+                   datasheet. i.e.
+
+                     - voltage output is in the range 800mV -> 3500mV.
+                     - regulator current output limit is 20mA @ 5V but is
+                       10mA @ 10V.
+
+                   Power Domain Level: This is defined in software by kernel
+                   level board initialisation code. It is used to constrain a
+                   power domain to a particular power range. i.e.
+
+                     - Domain-1 voltage is 3300mV
+                     - Domain-2 voltage is 1400mV -> 1600mV
+                     - Domain-3 current limit is 0mA -> 20mA.
+
+                   Consumer Level: This is defined by consumer drivers
+                   dynamically setting voltage or current limit levels.
+
+                   e.g. a consumer backlight driver asks for a current increase
+                   from 5mA to 10mA to increase LCD illumination. This passes
+                   to through the levels as follows :-
+
+                   Consumer: need to increase LCD brightness. Lookup and
+                   request next current mA value in brightness table (the
+                   consumer driver could be used on several different
+                   personalities based upon the same reference device).
+
+                   Power Domain: is the new current limit within the domain
+                   operating limits for this domain and system state (e.g.
+                   battery power, USB power)
+
+                   Regulator Domains: is the new current limit within the
+                   regulator operating parameters for input/ouput voltage.
+
+                   If the regulator request passes all the constraint tests
+                   then the new regulator value is applied.
+
+
+Design
+======
+
+The framework is designed and targeted at SoC based devices but may also be
+relevant to non SoC devices and is split into the following four interfaces:-
+
+
+   1. Consumer driver interface.
+
+      This uses a similar API to the kernel clock interface in that consumer
+      drivers can get and put a regulator (like they can with clocks atm) and
+      get/set voltage, current limit, mode, enable and disable. This should
+      allow consumers complete control over their supply voltage and current
+      limit. This also compiles out if not in use so drivers can be reused in
+      systems with no regulator based power control.
+
+        See Documentation/power/regulator/consumer.txt
+
+   2. Regulator driver interface.
+
+      This allows regulator drivers to register their regulators and provide
+      operations to the core. It also has a notifier call chain for propagating
+      regulator events to clients.
+
+        See Documentation/power/regulator/regulator.txt
+
+   3. Machine interface.
+
+      This interface is for machine specific code and allows the creation of
+      voltage/current domains (with constraints) for each regulator. It can
+      provide regulator constraints that will prevent device damage through
+      overvoltage or over current caused by buggy client drivers. It also
+      allows the creation of a regulator tree whereby some regulators are
+      supplied by others (similar to a clock tree).
+
+        See Documentation/power/regulator/machine.txt
+
+   4. Userspace ABI.
+
+      The framework also exports a lot of useful voltage/current/opmode data to
+      userspace via sysfs. This could be used to help monitor device power
+      consumption and status.
+
+        See Documentation/ABI/testing/regulator-sysfs.txt
diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt
new file mode 100644
index 00000000000..a6905014359
--- /dev/null
+++ b/Documentation/power/regulator/regulator.txt
@@ -0,0 +1,30 @@
+Regulator Driver Interface
+==========================
+
+The regulator driver interface is relatively simple and designed to allow
+regulator drivers to register their services with the core framework.
+
+
+Registration
+============
+
+Drivers can register a regulator by calling :-
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+					  void *reg_data);
+
+This will register the regulators capabilities and operations the regulator
+core. The core does not touch reg_data (private to regulator driver).
+
+Regulators can be unregistered by calling :-
+
+void regulator_unregister(struct regulator_dev *rdev);
+
+
+Regulator Events
+================
+Regulators can send events (e.g. over temp, under voltage, etc) to consumer
+drivers by calling :-
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data);
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
index 3be84aa38df..29d839ce732 100644
--- a/Documentation/powerpc/00-INDEX
+++ b/Documentation/powerpc/00-INDEX
@@ -20,8 +20,6 @@ mpc52xx-device-tree-bindings.txt
 	- MPC5200 Device Tree Bindings
 ppc_htab.txt
 	- info about the Linux/PPC /proc/ppc_htab entry
-SBC8260_memory_mapping.txt
-	- EST SBC8260 board info
 smp.txt
 	- use and state info about Linux/PPC on MP machines
 sound.txt
diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt
deleted file mode 100644
index e6e9ee0506c..00000000000
--- a/Documentation/powerpc/SBC8260_memory_mapping.txt
+++ /dev/null
@@ -1,197 +0,0 @@
-Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com)
-if you have questions, comments or corrections.
-
-	* EST SBC8260 Linux memory mapping rules
-
-	http://www.estc.com/ 
-	http://www.estc.com/products/boards/SBC8260-8240_ds.html
-
-	Initial conditions:
-	-------------------
-	
-	Tasks that need to be perform by the boot ROM before control is
-	transferred to zImage (compressed Linux kernel):
-
-	- Define the IMMR to 0xf0000000
-
-	- Initialize the memory controller so that RAM is available at
-	  physical address 0x00000000.  On the SBC8260 is this 16M (64M)
-	  SDRAM.
-
-	- The boot ROM should only clear the RAM that it is using.
-
-	  The reason for doing this is to enhances the chances of a
-	  successful post mortem on a Linux panic.  One of the first
-	  items to examine is the 16k (LOG_BUF_LEN) circular console
-	  buffer called log_buf which is defined in kernel/printk.c.
-
-	- To enhance boot ROM performance, the I-cache can be enabled.
-
-	  Date: Mon, 22 May 2000 14:21:10 -0700
-	  From: Neil Russell <caret@c-side.com>
-
-	  LiMon (LInux MONitor) runs with and starts Linux with MMU
-	  off, I-cache enabled, D-cache disabled.  The I-cache doesn't
-	  need hints from the MMU to work correctly as the D-cache
-	  does.  No D-cache means no special code to handle devices in
-	  the presence of cache (no snooping, etc). The use of the
-	  I-cache means that the monitor can run acceptably fast
-	  directly from ROM, rather than having to copy it to RAM.
-
-	- Build the board information structure (see 
-	  include/asm-ppc/est8260.h for its definition)
-
-	- The compressed Linux kernel (zImage) contains a bootstrap loader 
-	  that is position independent; you can load it into any RAM, 
-	  ROM or FLASH memory address >= 0x00500000 (above 5 MB), or
-	  at its link address of 0x00400000 (4 MB).
-
-	  Note: If zImage is loaded at its link address of 0x00400000 (4 MB),
-	        then zImage will skip the step of moving itself to 
-		its link address.
-
-	- Load R3 with the address of the board information structure
-
-	- Transfer control to zImage
-
-	- The Linux console port is SMC1, and the baud rate is controlled
-	  from the bi_baudrate field of the board information structure.
-	  On thing to keep in mind when picking the baud rate, is that
-	  there is no flow control on the SMC ports.  I would stick
-	  with something safe and standard like 19200.
-
-	  On the EST SBC8260, the SMC1 port is on the COM1 connector of
-	  the board.
-
-	
-	EST SBC8260 defaults:
-	---------------------
-
-                                Chip
-        Memory                  Sel  Bus   Use
-        ---------------------   ---  ---   ----------------------------------
-	0x00000000-0x03FFFFFF   CS2  60x   (16M or 64M)/64M SDRAM
-	0x04000000-0x04FFFFFF   CS4  local  4M/16M SDRAM (soldered to the board)
-	0x21000000-0x21000000   CS7  60x    1B/64K Flash present detect (from the flash SIMM)
-	0x21000001-0x21000001   CS7  60x    1B/64K Switches (read) and LEDs (write)
-	0x22000000-0x2200FFFF   CS5  60x    8K/64K EEPROM
-	0xFC000000-0xFCFFFFFF   CS6  60x    2M/16M flash (8 bits wide, soldered to the board)
-	0xFE000000-0xFFFFFFFF   CS0  60x    4M/16M flash (SIMM)
-
-	Notes:
-	------
-
-	- The chip selects can map 32K blocks and up (powers of 2)
-
-	- The SDRAM machine can handled up to 128Mbytes per chip select
-
-	- Linux uses the 60x bus memory (the SDRAM DIMM) for the 
-	  communications buffers.
-
-	- BATs can map 128K-256Mbytes each.  There are four data BATs and
-	  four instruction BATs.  Generally the data and instruction BATs
-	  are mapped the same.
-
-	- The IMMR must be set above the kernel virtual memory addresses,
-	  which start at 0xC0000000.  Otherwise, the kernel may crash as
-	  soon as you start any threads or processes due to VM collisions 
-	  in the kernel or user process space.
-
-
-	  Details from Dan Malek <dan_malek@mvista.com> on 10/29/1999:
-
-	  The user application virtual space consumes the first 2 Gbytes
-	  (0x00000000 to 0x7FFFFFFF).  The kernel virtual text starts at
-	  0xC0000000, with data following.  There is a "protection hole"
-	  between the end of kernel data and the start of the kernel
-	  dynamically allocated space, but this space is still within
-	  0xCxxxxxxx.
-
-	  Obviously the kernel can't map any physical addresses 1:1 in
-	  these ranges.
-
-
-	  Details from Dan Malek <dan_malek@mvista.com> on 5/19/2000:
-
-	  During the early kernel initialization, the kernel virtual
-	  memory allocator is not operational.  Prior to this KVM
-	  initialization, we choose to map virtual to physical addresses
-	  1:1.  That is, the kernel virtual address exactly matches the
-	  physical address on the bus.  These mappings are typically done
-	  in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c.  Only
-	  absolutely necessary mappings should be done at this time, for
-	  example board control registers or a serial uart.  Normal device
-	  driver initialization should map resources later when necessary.
-
-	  Although platform dependent, and certainly the case for embedded
-	  8xx, traditionally memory is mapped at physical address zero,
-	  and I/O devices above physical address 0x80000000.  The lowest
-	  and highest (above 0xf0000000) I/O addresses are traditionally 
-	  used for devices or registers we need to map during kernel 
-	  initialization and prior to KVM operation.  For this reason, 
-	  and since it followed prior PowerPC platform examples, I chose 
-	  to map the embedded 8xx kernel to the 0xc0000000 virtual address.
-	  This way, we can enable the MMU to map the kernel for proper 
-	  operation, and still map a few windows before the KVM is operational.
-
-	  On some systems, you could possibly run the kernel at the 
-	  0x80000000 or any other virtual address.  It just depends upon 
-	  mapping that must be done prior to KVM operational.  You can never 
-	  map devices or kernel spaces that overlap with the user virtual 
-	  space.  This is why default IMMR mapping used by most BDM tools 
-	  won't work.  They put the IMMR at something like 0x10000000 or 
-	  0x02000000 for example.  You simply can't map these addresses early
-	  in the kernel, and continue proper system operation.
-
-	  The embedded 8xx/82xx kernel is mature enough that all you should 
-	  need to do is map the IMMR someplace at or above 0xf0000000 and it 
-	  should boot far enough to get serial console messages and KGDB 
-	  connected on any platform.  There are lots of other subtle memory 
-	  management design features that you simply don't need to worry 
-	  about.  If you are changing functions related to MMU initialization,
-	  you are likely breaking things that are known to work and are 
-	  heading down a path of disaster and frustration.  Your changes 
-	  should be to make the flexibility of the processor fit Linux, 
-	  not force arbitrary and non-workable memory mappings into Linux.
-
-	- You don't want to change KERNELLOAD or KERNELBASE, otherwise the
-	  virtual memory and MMU code will get confused.
-	
-	  arch/ppc/Makefile:KERNELLOAD = 0xc0000000
-
-	  include/asm-ppc/page.h:#define PAGE_OFFSET    0xc0000000
-	  include/asm-ppc/page.h:#define KERNELBASE     PAGE_OFFSET
-
-	- RAM is at physical address 0x00000000, and gets mapped to 
-	  virtual address 0xC0000000 for the kernel.
-
-
-	Physical addresses used by the Linux kernel:
-	--------------------------------------------
-
-	0x00000000-0x3FFFFFFF   1GB reserved for RAM
-	0xF0000000-0xF001FFFF   128K IMMR  64K used for dual port memory,
-                                 64K for 8260 registers
-
-	
-        Logical addresses used by the Linux kernel:
-	-------------------------------------------
-
-	0xF0000000-0xFFFFFFFF   256M BAT0 (IMMR: dual port RAM, registers)
-	0xE0000000-0xEFFFFFFF   256M BAT1 (I/O space for custom boards)
-	0xC0000000-0xCFFFFFFF   256M BAT2 (RAM)
-	0xD0000000-0xDFFFFFFF   256M BAT3 (if RAM > 256MByte)
-
-
-	EST SBC8260 Linux mapping:
-	--------------------------
-
-	DBAT0, IBAT0, cache inhibited:
-
-                                Chip
-        Memory                  Sel  Use
-        ---------------------   ---  ---------------------------------
-        0xF0000000-0xF001FFFF   n/a  IMMR: dual port RAM, registers
-
-        DBAT1, IBAT1, cache inhibited:
-
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 928a79ceb7a..de4063cb4fd 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -278,7 +278,7 @@ it with special cases.
         a 64-bit platform.
 
         d) request and get assigned a platform number (see PLATFORM_*
-        constants in include/asm-powerpc/processor.h
+        constants in arch/powerpc/include/asm/processor.h
 
 32-bit embedded kernels:
 
@@ -340,7 +340,7 @@ the block to RAM before passing it to the kernel.
 ---------
 
    The kernel is entered with r3 pointing to an area of memory that is
-   roughly described in include/asm-powerpc/prom.h by the structure
+   roughly described in arch/powerpc/include/asm/prom.h by the structure
    boot_param_header:
 
 struct boot_param_header {
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
index b35f3482e3e..2ea76d9d137 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
@@ -7,6 +7,15 @@ Currently defined compatibles:
 - fsl,cpm2-scc-uart
 - fsl,qe-uart
 
+Modem control lines connected to GPIO controllers are listed in the gpios
+property as described in booting-without-of.txt, section IX.1 in the following
+order:
+
+CTS, RTS, DCD, DSR, DTR, and RI.
+
+The gpios property is optional and can be left out when control lines are
+not used.
+
 Example:
 
 	serial@11a00 {
@@ -18,4 +27,6 @@ Example:
 		interrupt-parent = <&PIC>;
 		fsl,cpm-brg = <1>;
 		fsl,cpm-command = <00800000>;
+		gpios = <&gpio_c 15 0
+			 &gpio_d 29 0>;
 	};
diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt
index df7afe43d46..9d4e33df624 100644
--- a/Documentation/powerpc/eeh-pci-error-recovery.txt
+++ b/Documentation/powerpc/eeh-pci-error-recovery.txt
@@ -133,7 +133,7 @@ error.  Given an arbitrary address, the routine
 pci_get_device_by_addr() will find the pci device associated
 with that address (if any).
 
-The default include/asm-powerpc/io.h macros readb(), inb(), insb(),
+The default arch/powerpc/include/asm/io.h macros readb(), inb(), insb(),
 etc. include a check to see if the i/o read returned all-0xff's.
 If so, these make a call to eeh_dn_check_failure(), which in turn
 asks the firmware if the all-ff's value is the sign of a true EEH
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 0843ed0163a..6fcb3060dec 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -363,6 +363,11 @@ This rule exists because users of the rfkill subsystem expect to get (and set,
 when possible) the overall transmitter rfkill state, not of a particular rfkill
 line.
 
+5. During suspend, the rfkill class will attempt to soft-block the radio
+through a call to rfkill->toggle_radio, and will try to restore its previous
+state during resume.  After a rfkill class is suspended, it will *not* call
+rfkill->toggle_radio until it is resumed.
+
 Example of a WLAN wireless driver connected to the rfkill subsystem:
 --------------------------------------------------------------------
 
@@ -390,9 +395,10 @@ rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft
 rfkill input line is active.  Only if none of the rfkill input lines are
 active, will it return RFKILL_STATE_UNBLOCKED.
 
-If it doesn't implement the get_state() hook, it must make sure that its calls
-to rfkill_force_state() are enough to keep the status always up-to-date, and it
-must do a rfkill_force_state() on resume from sleep.
+Since the device has a hardware rfkill line, it IS subject to state changes
+external to rfkill.  Therefore, the driver must make sure that it calls
+rfkill_force_state() to keep the status always up-to-date, and it must do a
+rfkill_force_state() on resume from sleep.
 
 Every time the driver gets a notification from the card that one of its rfkill
 lines changed state (polling might be needed on badly designed cards that don't
@@ -422,13 +428,24 @@ of the hardware is unknown), or read-write (where the hardware can be queried
 about its current state).
 
 The rfkill class will call the get_state hook of a device every time it needs
-to know the *real* current state of the hardware.  This can happen often.
+to know the *real* current state of the hardware.  This can happen often, but
+it does not do any polling, so it is not enough on hardware that is subject
+to state changes outside of the rfkill subsystem.
+
+Therefore, calling rfkill_force_state() when a state change happens is
+mandatory when the device has a hardware rfkill line, or when something else
+like the firmware could cause its state to be changed without going through the
+rfkill class.
 
 Some hardware provides events when its status changes.  In these cases, it is
 best for the driver to not provide a get_state hook, and instead register the
 rfkill class *already* with the correct status, and keep it updated using
 rfkill_force_state() when it gets an event from the hardware.
 
+rfkill_force_state() must be used on the device resume handlers to update the
+rfkill status, should there be any chance of the device status changing during
+the sleep.
+
 There is no provision for a statically-allocated rfkill struct.  You must
 use rfkill_allocate() to allocate one.
 
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 716fcc1cafb..c851ef49779 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,26 @@
+
+1 Release Date    : Thur.July. 24 11:41:51 PST 2008 -
+                       (emaild-id:megaraidlinux@lsi.com)
+                       Sumant Patro
+                       Bo Yang
+
+2 Current Version : 00.00.04.01
+3 Older Version   : 00.00.03.22
+
+1. Add the new controller (0078, 0079) support to the driver
+       Those controllers are LSI's next generatation(gen2) SAS controllers.
+
+1 Release Date    : Mon.June. 23 10:12:45 PST 2008 -
+                       (emaild-id:megaraidlinux@lsi.com)
+                       Sumant Patro
+                       Bo Yang
+
+2 Current Version : 00.00.03.22
+3 Older Version   : 00.00.03.20
+
+1. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
+2. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
+
 1 Release Date    : Mon. March 10 11:02:31 PDT 2008 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Sumant Patro
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 6f6d117ac7e..b117e42a616 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1144,8 +1144,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports autoprobe and multiple cards.
 
-    Power management is _not_ supported.
-
   Module snd-ice1712
   ------------------
 
@@ -1628,8 +1626,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports autoprobe and multiple cards.
 
-    Power management is _not_ supported.
-
   Module snd-pcsp
   -----------------
 
@@ -2081,13 +2077,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-virtuoso
   -------------------
 
-    Module for sound cards based on the Asus AV200 chip, i.e.,
-    Xonar D2 and Xonar D2X.
+    Module for sound cards based on the Asus AV100/AV200 chips,
+    i.e., Xonar D1, DX, D2 and D2X.
 
     This module supports autoprobe and multiple cards.
 
-    Power management is _not_ supported.
-
   Module snd-vx222
   ----------------
 
diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile
new file mode 100644
index 00000000000..a5b03c88bea
--- /dev/null
+++ b/Documentation/spi/Makefile
@@ -0,0 +1,11 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := spidev_test spidev_fdx
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include
+HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index f3853cc37bd..bbe8dee681a 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers
 -----------------------------------
 Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
 "platform device".  The master configuration is passed to the driver via a table
-found in include/asm-arm/arch-pxa/pxa2xx_spi.h:
+found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h:
 
 struct pxa2xx_spi_master {
 	enum pxa_ssp_type ssp_type;
@@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See
 
 Each slave device attached to the PXA must provide slave specific configuration
 information via the structure "pxa2xx_spi_chip" found in
-"include/asm-arm/arch-pxa/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
+"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
 will uses the configuration whenever the driver communicates with the slave
 device.
 
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 6d5f18143c5..8bae2f018d3 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -210,7 +210,7 @@ board should normally be set up and registered.
 
 So for example arch/.../mach-*/board-*.c files might have code like:
 
-	#include <asm/arch/spi.h>	/* for mysoc_spi_data */
+	#include <mach/spi.h>	/* for mysoc_spi_data */
 
 	/* if your mach-* infrastructure doesn't support kernels that can
 	 * run on multiple boards, pdata wouldn't benefit from "__init".
@@ -227,7 +227,7 @@ So for example arch/.../mach-*/board-*.c files might have code like:
 
 And SOC-specific utility code might look something like:
 
-	#include <asm/arch/spi.h>
+	#include <mach/spi.h>
 
 	static struct platform_device spi2 = { ... };
 
diff --git a/Documentation/usb/auerswald.txt b/Documentation/usb/auerswald.txt
deleted file mode 100644
index 7ee4d8f6911..00000000000
--- a/Documentation/usb/auerswald.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-		Auerswald USB kernel driver
-		===========================
-
-What is it? What can I do with it?
-==================================
-The auerswald USB kernel driver connects your linux 2.4.x
-system to the auerswald usb-enabled devices.
-
-There are two types of auerswald usb devices:
-a) small PBX systems (ISDN)
-b) COMfort system telephones (ISDN)
-
-The driver installation creates the devices
-/dev/usb/auer0..15. These devices carry a vendor-
-specific protocol. You may run all auerswald java
-software on it. The java software needs a native
-library "libAuerUsbJNINative.so" installed on
-your system. This library is available from
-auerswald and shipped as part of the java software.
-
-You may create the devices with:
-	mknod -m 666 /dev/usb/auer0 c 180 112
-	...
-	mknod -m 666 /dev/usb/auer15 c 180 127
-
-Future plans
-============
-- Connection to ISDN4LINUX (the hisax interface)
-
-The maintainer of this driver is wolfgang@iksw-muees.de
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index b2fc4d4a991..9d31140e3f5 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -436,7 +436,12 @@ post_reset; the USB core guarantees that this is true of internal
 suspend/resume events as well.
 
 If a driver wants to block all suspend/resume calls during some
-critical section, it can simply acquire udev->pm_mutex.
+critical section, it can simply acquire udev->pm_mutex. Note that
+calls to resume may be triggered indirectly. Block IO due to memory
+allocations can make the vm subsystem resume a device. Thus while
+holding this lock you must not allocate memory with GFP_KERNEL or
+GFP_NOFS.
+
 Alternatively, if the critical section might call some of the
 usb_autopm_* routines, the driver can avoid deadlock by doing:
 
diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828
index eedc399e8de..aa05e5bb22f 100644
--- a/Documentation/video4linux/CARDLIST.au0828
+++ b/Documentation/video4linux/CARDLIST.au0828
@@ -3,3 +3,4 @@
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
   4 -> Hauppauge HVR950Q rev xxF8               (au0828)        [2040:7201,2040:7211,2040:7281]
+  5 -> Hauppauge Woodbury                       (au0828)        [2040:8200]
diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile
new file mode 100644
index 00000000000..1ed0e98d057
--- /dev/null
+++ b/Documentation/video4linux/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := v4lgrab
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index bcaf4ab383b..0f03900c48f 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -88,14 +88,14 @@ zc3xx		0471:0325	Philips SPC 200 NC
 zc3xx		0471:0326	Philips SPC 300 NC
 sonixj		0471:0327	Philips SPC 600 NC
 sonixj		0471:0328	Philips SPC 700 NC
-zc3xx		0471:032d	Philips spc210nc
-zc3xx		0471:032e	Philips spc315nc
-sonixj		0471:0330	Philips SPC 710NC
+zc3xx		0471:032d	Philips SPC 210 NC
+zc3xx		0471:032e	Philips SPC 315 NC
+sonixj		0471:0330	Philips SPC 710 NC
 spca501		0497:c001	Smile International
 sunplus		04a5:3003	Benq DC 1300
 sunplus		04a5:3008	Benq DC 1500
-sunplus		04a5:300a	Benq DC3410
-spca500		04a5:300c	Benq DC1016
+sunplus		04a5:300a	Benq DC 3410
+spca500		04a5:300c	Benq DC 1016
 sunplus		04f1:1001	JVC GC A50
 spca561		04fc:0561	Flexcam 100
 sunplus		04fc:500c	Sunplus CA500C
@@ -175,19 +175,21 @@ sunplus		08ca:2060	Aiptek PocketDV5300
 tv8532		0923:010f	ICM532 cams
 mars		093a:050f	Mars-Semi Pc-Camera
 pac207		093a:2460	PAC207 Qtec Webcam 100
-pac207		093a:2463	Philips spc200nc pac207
+pac207		093a:2463	Philips SPC 220 NC
 pac207		093a:2464	Labtec Webcam 1200
 pac207		093a:2468	PAC207
 pac207		093a:2470	Genius GF112
-pac207		093a:2471	PAC207 Genius VideoCam ge111
-pac207		093a:2472	PAC207 Genius VideoCam ge110
+pac207		093a:2471	Genius VideoCam ge111
+pac207		093a:2472	Genius VideoCam ge110
 pac7311		093a:2600	PAC7311 Typhoon
-pac7311		093a:2601	PAC7311 Phillips SPC610NC
+pac7311		093a:2601	Philips SPC 610 NC
 pac7311		093a:2603	PAC7312
-pac7311		093a:2608	PAC7311 Trust WB-3300p
-pac7311		093a:260e	PAC7311 Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
-pac7311		093a:260f	PAC7311 SnakeCam
+pac7311		093a:2608	Trust WB-3300p
+pac7311		093a:260e	Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
+pac7311		093a:260f	SnakeCam
 pac7311		093a:2621	PAC731x
+pac7311		093a:2624	PAC7302
+pac7311		093a:2626	Labtec 2200
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
 vc032x		0ac8:0323	Vimicro Vc0323
@@ -220,12 +222,14 @@ sonixj		0c45:60c0	Sangha Sn535
 sonixj		0c45:60ec	SN9C105+MO4000
 sonixj		0c45:60fb	Surfer NoName
 sonixj		0c45:60fc	LG-LIC300
+sonixj		0c45:6128	Microdia/Sonix SNP325
 sonixj		0c45:612a	Avant Camera
 sonixj		0c45:612c	Typhoon Rasy Cam 1.3MPix
 sonixj		0c45:6130	Sonix Pccam
 sonixj		0c45:6138	Sn9c120 Mo4000
 sonixj		0c45:613b	Surfer SN-206
 sonixj		0c45:613c	Sonix Pccam168
+sonixj		0c45:6143	Sonix Pccam168
 sunplus		0d64:0303	Sunplus FashionCam DXG
 etoms		102c:6151	Qcam Sangha CIF
 etoms		102c:6251	Qcam xxxxxx VGA
@@ -233,7 +237,7 @@ zc3xx		10fd:0128	Typhoon Webshot II USB 300k 0x0128
 spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 spca501		1776:501c	Arowana 300K CMOS Camera
-t613		17a1:0128	T613/TAS5130A
+t613		17a1:0128	TASCORP JPEG Webcam, NGS Cyclops
 vc032x		17ef:4802	Lenovo Vc0323+MI1310_SOC
 pac207		2001:f115	D-Link DSB-C120
 spca500		2899:012c	Toptro Industrial
diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile
new file mode 100644
index 00000000000..6f562f778b2
--- /dev/null
+++ b/Documentation/vm/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := slabinfo
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/vm/page_migration b/Documentation/vm/page_migration
index 99f89aa1016..d5fdfd34bba 100644
--- a/Documentation/vm/page_migration
+++ b/Documentation/vm/page_migration
@@ -18,10 +18,11 @@ migrate_pages function call takes two sets of nodes and moves pages of a
 process that are located on the from nodes to the destination nodes.
 Page migration functions are provided by the numactl package by Andi Kleen
 (a version later than 0.9.3 is required. Get it from
-ftp://ftp.suse.com/pub/people/ak). numactl provided libnuma which
-provides an interface similar to other numa functionality for page migration.
-cat /proc/<pid>/numa_maps allows an easy review of where the pages of
-a process are located. See also the numa_maps manpage in the numactl package.
+ftp://oss.sgi.com/www/projects/libnuma/download/). numactl provides libnuma
+which provides an interface similar to other numa functionality for page
+migration.  cat /proc/<pid>/numa_maps allows an easy review of where the
+pages of a process are located. See also the numa_maps documentation in the
+proc(5) man page.
 
 Manual migration is useful if for example the scheduler has relocated
 a process to a processor on a distant node. A batch scheduler or an
diff --git a/Documentation/watchdog/src/Makefile b/Documentation/watchdog/src/Makefile
new file mode 100644
index 00000000000..40e5f46e474
--- /dev/null
+++ b/Documentation/watchdog/src/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := watchdog-simple watchdog-test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4bfa468ceae..b5154c12ca2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -175,12 +175,18 @@ M:	bcrl@kvack.org
 L:	linux-aio@kvack.org
 S:	Supported
 
-ABIT UGURU HARDWARE MONITOR DRIVER
+ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
 P:	Hans de Goede
 M:	j.w.r.degoede@hhs.nl
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 
+ABIT UGURU 3 HARDWARE MONITOR DRIVER
+P:	Alistair John Strachan
+M:	alistair@devzero.co.uk
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+
 ACENIC DRIVER
 P:	Jes Sorensen
 M:	jes@trained-monkey.org
@@ -216,8 +222,7 @@ W:	http://code.google.com/p/aceracpi
 S:	Maintained
 
 ACPI
-P:	Andi Kleen
-M:	ak@linux.intel.com
+P:	Len Brown
 M:	lenb@kernel.org
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
@@ -266,20 +271,20 @@ W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 
 ACPI WMI DRIVER
-P:      Carlos Corbacho
-M:      carlos@strangeworlds.co.uk
-L:      linux-acpi@vger.kernel.org
-W:      http://www.lesswatts.org/projects/acpi/
-S:      Maintained
+P:	Carlos Corbacho
+M:	carlos@strangeworlds.co.uk
+L:	linux-acpi@vger.kernel.org
+W:	http://www.lesswatts.org/projects/acpi/
+S:	Maintained
 
 AD1889 ALSA SOUND DRIVER
-P:     Kyle McMartin
-M:     kyle@mcmartin.ca
-P:     Thibaut Varene
-M:     T-Bone@parisc-linux.org
-W:     http://wiki.parisc-linux.org/AD1889
-L:     linux-parisc@vger.kernel.org
-S:     Maintained
+P:	Kyle McMartin
+M:	kyle@mcmartin.ca
+P:	Thibaut Varene
+M:	T-Bone@parisc-linux.org
+W:	http://wiki.parisc-linux.org/AD1889
+L:	linux-parisc@vger.kernel.org
+S:	Maintained
 
 ADM1025 HARDWARE MONITOR DRIVER
 P:	Jean Delvare
@@ -418,6 +423,12 @@ L:	linux-laptop@vger.kernel.org
 W:	http://www.canb.auug.org.au/~sfr/
 S:	Supported
 
+APPLE BCM5974 MULTITOUCH DRIVER
+P:	Henrik Rydberg
+M:	rydberg@euromail.se
+L:	linux-input@vger.kernel.org
+S:	Maintained
+
 APPLE SMC DRIVER
 P:	Nicolas Boichat
 M:	nicolas@boichat.ch
@@ -467,11 +478,11 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P:      Andrew Victor
-M:      linux@maxim.org.za
-L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W:      http://maxim.org.za/at91_26.html
-S:      Maintained
+P:	Andrew Victor
+M:	linux@maxim.org.za
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W:	http://maxim.org.za/at91_26.html
+S:	Maintained
 
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
 P:	Lennert Buytenhek
@@ -507,6 +518,12 @@ L:	openezx-devel@lists.openezx.org (subscribers-only)
 W:	http://www.openezx.org/
 S:	Maintained
 
+ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
+P:	Sascha Hauer
+M:	kernel@pengutronix.de
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 P:	Lennert Buytenhek
 M:	kernel@wantstofly.org
@@ -520,10 +537,10 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/HP JORNADA 7XX MACHINE SUPPORT
-P:      Kristoffer Ericson
-M:      kristoffer.ericson@gmail.com
-W:      www.jlime.com
-S:      Maintained
+P:	Kristoffer Ericson
+M:	kristoffer.ericson@gmail.com
+W:	www.jlime.com
+S:	Maintained
 
 ARM/INTEL IOP32X ARM ARCHITECTURE
 P:	Lennert Buytenhek
@@ -593,6 +610,11 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/MAGICIAN MACHINE SUPPORT
+P:	Philipp Zabel
+M:	philipp.zabel@gmail.com
+S:	Maintained
+
 ARM/TOSA MACHINE SUPPORT
 P:	Dmitry Baryshkov
 M:	dbaryshkov@gmail.com
@@ -719,16 +741,27 @@ L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
 S:	Maintained
 
+ATHEROS ATH9K WIRELESS DRIVER
+P:	Luis R. Rodriguez
+M:	lrodriguez@atheros.com
+P:	Jouni Malinen
+M:	jmalinen@atheros.com
+L:	linux-wireless@vger.kernel.org
+L:	ath9k-devel@lists.ath9k.org
+S:	Supported
+
 ATI_REMOTE2 DRIVER
 P:	Ville Syrjala
 M:	syrjala@sci.fi
 S:	Maintained
 
-ATL1 ETHERNET DRIVER
+ATLX ETHERNET DRIVERS
 P:	Jay Cliburn
 M:	jcliburn@gmail.com
 P:	Chris Snook
 M:	csnook@redhat.com
+P:	Jie Yang
+M:	jie.yang@atheros.com
 L:	atl1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -921,94 +954,19 @@ M:	joern@lazybastard.org
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 
-BLUETOOTH SUBSYSTEM
+BLUETOOTH DRIVERS
 P:	Marcel Holtmann
 M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
 L:	linux-bluetooth@vger.kernel.org
-W:	http://bluez.sf.net
-W:	http://www.bluez.org
-W:	http://www.holtmann.org/linux/bluetooth/
-T:	git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
-S:	Maintained
-
-BLUETOOTH RFCOMM LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH BNEP LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH CMTP LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HIDP LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI UART DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH HCI USB DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH HCI BCM203X DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BPA10X DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BFUSB DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI DTL1 DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BLUECARD DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
+W:	http://www.bluez.org/
 S:	Maintained
 
-BLUETOOTH HCI BT3C DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BTUART DRIVER
+BLUETOOTH SUBSYSTEM
 P:	Marcel Holtmann
 M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI VHCI DRIVER
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
+L:	linux-bluetooth@vger.kernel.org
+W:	http://www.bluez.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
 S:	Maintained
 
 BONDING DRIVER
@@ -1064,7 +1022,7 @@ T:	git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
 S:	Maintained
 
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P:   	Jonathan Corbet
+P:	Jonathan Corbet
 M:	corbet@lwn.net
 L:	video4linux-list@redhat.com
 S:	Maintained
@@ -1234,7 +1192,7 @@ S:	Maintained
 CPU FREQUENCY DRIVERS
 P:	Dave Jones
 M:	davej@codemonkey.org.uk
-L:	cpufreq@lists.linux.org.uk
+L:	cpufreq@vger.kernel.org
 W:	http://www.codemonkey.org.uk/projects/cpufreq/
 T:	git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
 S:	Maintained
@@ -1406,7 +1364,7 @@ P:	Digi International, Inc
 M:	Eng.Linux@digi.com
 L:	Eng.Linux@digi.com
 W:	http://www.digi.com
-S:	Orphaned
+S:	Orphan
 
 DIRECTORY NOTIFICATION
 P:	Stephen Rothwell
@@ -1470,12 +1428,12 @@ L:	linux-acpi@vger.kernel.org
 S:	Supported
 
 DOCUMENTATION (/Documentation directory)
-P:     Michael Kerrisk
-M:     mtk.manpages@gmail.com
-P:     Randy Dunlap
-M:     rdunlap@xenotime.net
-L:     linux-doc@vger.kernel.org
-S:     Maintained
+P:	Michael Kerrisk
+M:	mtk.manpages@gmail.com
+P:	Randy Dunlap
+M:	rdunlap@xenotime.net
+L:	linux-doc@vger.kernel.org
+S:	Maintained
 
 DOUBLETALK DRIVER
 P:	James R. Van Zandt
@@ -1506,7 +1464,7 @@ S:	Maintained
 DVB SUBSYSTEM AND DRIVERS
 P:	LinuxTV.org Project
 M:	v4l-dvb-maintainer@linuxtv.org
-L: 	linux-dvb@linuxtv.org (subscription required)
+L:	linux-dvb@linuxtv.org (subscription required)
 W:	http://linuxtv.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
 S:	Maintained
@@ -1642,7 +1600,7 @@ S:	Supported
 EMBEDDED LINUX
 P:	Paul Gortmaker
 M:	paul.gortmaker@windriver.com
-P	David Woodhouse
+P:	David Woodhouse
 M:	dwmw2@infradead.org
 L:	linux-embedded@vger.kernel.org
 S:	Maintained
@@ -1844,7 +1802,7 @@ FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
 P:	Rik Faith
 M:	faith@cs.unc.edu
 L:	linux-scsi@vger.kernel.org
-S:	Odd fixes (e.g., new signatures)
+S:	Odd Fixes (e.g., new signatures)
 
 GDT SCSI DISK ARRAY CONTROLLER DRIVER
 P:	Achim Leubner
@@ -1883,16 +1841,12 @@ W:	http://gigaset307x.sourceforge.net/
 S:	Maintained
 
 HARDWARE MONITORING
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
-T:	git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git testing
-T:	git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git release
-S:	Maintained
+S:	Orphan
 
 HARDWARE RANDOM NUMBER GENERATOR CORE
-S:	Orphaned
+S:	Orphan
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
 P:	Robert Love
@@ -2159,7 +2113,7 @@ M:	rolandd@cisco.com
 P:	Sean Hefty
 M:	sean.hefty@intel.com
 P:	Hal Rosenstock
-M:	hal.rosenstock@gmail.com 
+M:	hal.rosenstock@gmail.com
 L:	general@lists.openfabrics.org
 W:	http://www.openib.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
@@ -2451,7 +2405,7 @@ L:	kernel-janitors@vger.kernel.org
 W:	http://www.kerneljanitors.org/
 S:	Maintained
 
-KERNEL NFSD
+KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 P:	J. Bruce Fields
 M:	bfields@fieldses.org
 P:	Neil Brown
@@ -2747,17 +2701,17 @@ S:	Maintained
 
 MARVELL YUKON / SYSKONNECT DRIVER
 P:	Mirko Lindner
-M: 	mlindner@syskonnect.de
+M:	mlindner@syskonnect.de
 P:	Ralph Roesler
-M: 	rroesler@syskonnect.de
-W: 	http://www.syskonnect.com
-S: 	Supported
+M:	rroesler@syskonnect.de
+W:	http://www.syskonnect.com
+S:	Supported
 
 MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
 P:	Michael Kerrisk
 M:	mtk.manpages@gmail.com
-W:     http://www.kernel.org/doc/man-pages
-S:     Supported
+W:	http://www.kernel.org/doc/man-pages
+S:	Supported
 
 MARVELL LIBERTAS WIRELESS DRIVER
 P:	Dan Williams
@@ -2786,7 +2740,7 @@ S:	Maintained
 MEGARAID SCSI DRIVERS
 P:	Neela Syam Kolli
 M:	megaraidlinux@lsi.com
-S:	linux-scsi@vger.kernel.org
+L:	linux-scsi@vger.kernel.org
 W:	http://megaraid.lsilogic.com
 S:	Maintained
 
@@ -2904,7 +2858,7 @@ MULTIMEDIA CARD (MMC) ETC. OVER SPI
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
 L:	linux-kernel@vger.kernel.org
-S:	Odd fixes
+S:	Odd Fixes
 
 MULTISOUND SOUND DRIVER
 P:	Andrew Veliath
@@ -2917,6 +2871,12 @@ M:	jirislaby@gmail.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
+MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
+P:	Felipe Balbi
+M:	felipe.balbi@nokia.com
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
 P:	Andrew Gallatin
 M:	gallatin@myri.com
@@ -2927,7 +2887,7 @@ W:	http://www.myri.com/scs/download-Myri10GE.html
 S:	Supported
 
 NATSEMI ETHERNET DRIVER (DP8381x)
-P: 	Tim Hockin
+P:	Tim Hockin
 M:	thockin@hockin.org
 S:	Maintained
 
@@ -3065,9 +3025,10 @@ M:	horms@verge.net.au
 P:	Julian Anastasov
 M:	ja@ssi.bg
 L:	netdev@vger.kernel.org
+L:	lvs-devel@vger.kernel.org
 S:	Maintained
 
-NFS CLIENT
+NFS, SUNRPC, AND LOCKD CLIENTS
 P:	Trond Myklebust
 M:	Trond.Myklebust@netapp.com
 L:	linux-nfs@vger.kernel.org
@@ -3102,7 +3063,7 @@ P:	Anton Altaparmakov
 M:	aia21@cantab.net
 L:	linux-ntfs-dev@lists.sourceforge.net
 L:	linux-kernel@vger.kernel.org
-W:	http://linux-ntfs.sf.net/
+W:	http://www.linux-ntfs.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
 S:	Maintained
 
@@ -3145,7 +3106,7 @@ M:	laforge@gnumonks.org
 S:	Maintained
 
 OMNIVISION OV7670 SENSOR DRIVER
-P:   	Jonathan Corbet
+P:	Jonathan Corbet
 M:	corbet@lwn.net
 L:	video4linux-list@redhat.com
 S:	Maintained
@@ -3255,7 +3216,7 @@ T:	git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:	Supported
 
 PCI HOTPLUG CORE
-P: 	Kristen Carlson Accardi
+P:	Kristen Carlson Accardi
 M:	kristen.c.accardi@intel.com
 S:	Supported
 
@@ -3694,7 +3655,7 @@ M:	jmorris@namei.org
 P:	Eric Paris
 M:	eparis@parisplace.org
 L:	linux-kernel@vger.kernel.org (kernel issues)
-L: 	selinux@tycho.nsa.gov (subscribers-only, general discussion)
+L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://www.nsa.gov/selinux
 S:	Supported
 
@@ -3730,6 +3691,16 @@ L:	linux-visws-devel@lists.sf.net
 W:	http://linux-visws.sf.net
 S:	Maintained for 2.6.
 
+SGI GRU DRIVER
+P:	Jack Steiner
+M:	steiner@sgi.com
+S:	Maintained
+
+SGI XP/XPC/XPNET DRIVER
+P:	Dean Nelson
+M:	dcn@sgi.com
+S:	Maintained
+
 SIMTEC EB110ATX (Chalice CATS)
 P:	Ben Dooks
 P:	Vincent Sanders
@@ -3802,10 +3773,10 @@ M:	bn@niasdigital.com
 S:	Maintained
 
 SOC-CAMERA V4L2 SUBSYSTEM
-P:     Guennadi Liakhovetski
-M:     g.liakhovetski@gmx.de
-L:     video4linux-list@redhat.com
-S:     Maintained
+P:	Guennadi Liakhovetski
+M:	g.liakhovetski@gmx.de
+L:	video4linux-list@redhat.com
+S:	Maintained
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
 P:	Ingo Molnar
@@ -3959,7 +3930,7 @@ S:	Maintained
 
 STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
 W:	http://mosquitonet.Stanford.EDU/strip.html
-S:	Unsupported ?
+S:	Orphan
 
 STRADIS MPEG-2 DECODER DRIVER
 P:	Nathan Laredo
@@ -3973,7 +3944,7 @@ M:	lethal@linux-sh.org
 L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
-S:	Maintained
+S:	Supported
 
 SUN3/3X
 P:	Sam Creasey
@@ -4040,13 +4011,13 @@ T:	git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
 S:	Maintained
 
 TI FLASH MEDIA INTERFACE DRIVER
-P:      Alex Dubov
-M:      oakad@yahoo.com
-S:      Maintained
+P:	Alex Dubov
+M:	oakad@yahoo.com
+S:	Maintained
 
 TI OMAP MMC INTERFACE DRIVER
 P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
-M:	linux-omap-open-source@linux.omap.com (subscribers only)
+M:	linux-omap@vger.kernel.org
 W:	http://linux.omap.com
 W:	http://www.muru.com/linux/omap/
 S:	Maintained
@@ -4184,23 +4155,17 @@ M:	oliver@neukum.name
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 
-USB AUERSWALD DRIVER
-P:	Wolfgang Muees
-M:	wolfgang@iksw-muees.de
-L:      linux-usb@vger.kernel.org
-S:	Maintained
-
 USB BLOCK DRIVER (UB ub)
 P:	Pete Zaitcev
 M:	zaitcev@redhat.com
 L:	linux-kernel@vger.kernel.org
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Supported
 
 USB CDC ETHERNET DRIVER
 P:	Greg Kroah-Hartman
 M:	greg@kroah.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://www.kroah.com/linux-usb/
 
@@ -4227,13 +4192,13 @@ S:	Maintained
 USB EHCI DRIVER
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Odd Fixes
 
 USB ET61X[12]51 DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@@ -4241,33 +4206,33 @@ S:	Maintained
 USB GADGET/PERIPHERAL SUBSYSTEM
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
 S:	Maintained
 
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
 P:	Jiri Kosina
 M:	jkosina@suse.cz
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
 
 USB ISP116X DRIVER
 P:	Olav Kongas
 M:	ok@artecdesign.ee
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB KAWASAKI LSI DRIVER
 P:	Oliver Neukum
 M:	oliver@neukum.name
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB MASS STORAGE DRIVER
 P:	Matthew Dharm
 M:	mdharm-usb@one-eyed-alien.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	usb-storage@lists.one-eyed-alien.net
 S:	Maintained
 W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
@@ -4275,26 +4240,26 @@ W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
 USB OHCI DRIVER
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Odd Fixes
 
 USB OPTION-CARD DRIVER
 P:	Matthias Urlichs
 M:	smurf@smurf.noris.de
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB OV511 DRIVER
 P:	Mark McClelland
 M:	mmcclell@bigfoot.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://alpha.dyndns.org/ov511/
 S:	Maintained
 
 USB PEGASUS DRIVER
 P:	Petko Manolov
 M:	petkan@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
 S:	Maintained
@@ -4302,13 +4267,13 @@ S:	Maintained
 USB PRINTER DRIVER (usblp)
 P:	Pete Zaitcev
 M:	zaitcev@redhat.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Supported
 
 USB RTL8150 DRIVER
 P:	Petko Manolov
 M:	petkan@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
 S:	Maintained
@@ -4316,20 +4281,20 @@ S:	Maintained
 USB SE401 DRIVER
 P:	Jeroen Vreeken
 M:	pe1rxq@amsat.org
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.chello.nl/~j.vreeken/se401/
 S:	Maintained
 
 USB SERIAL BELKIN F5U103 DRIVER
 P:	William Greathouse
 M:	wgreathouse@smva.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB SERIAL CYPRESS M8 DRIVER
 P:	Lonnie Mendez
 M:	dignome@gmail.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://geocities.com/i0xox0i
 W:	http://firstlight.net/cvs
@@ -4344,39 +4309,39 @@ USB SERIAL DIGI ACCELEPORT DRIVER
 P:	Peter Berger and Al Borchers
 M:	pberger@brimson.com
 M:	alborchers@steinerpoint.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB SERIAL DRIVER
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Supported
 
 USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
 P:	Gary Brubaker
 M:	xavyer@ix.netcom.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB SERIAL KEYSPAN DRIVER
 P:	Greg Kroah-Hartman
 M:	greg@kroah.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.kroah.com/linux/
 S:	Maintained
 
 USB SERIAL WHITEHEAT DRIVER
 P:	Support Department
 M:	support@connecttech.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.connecttech.com
 S:	Supported
 
 USB SN9C1xx DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@@ -4384,7 +4349,7 @@ S:	Maintained
 USB SUBSYSTEM
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
@@ -4392,7 +4357,7 @@ S:	Supported
 USB UHCI DRIVER
 P:	Alan Stern
 M:	stern@rowland.harvard.edu
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB "USBNET" DRIVER FRAMEWORK
@@ -4405,7 +4370,7 @@ S:	Maintained
 USB VIDEO CLASS
 P:	Laurent Pinchart
 M:	laurent.pinchart@skynet.be
-L:	linx-uvc-devel@berlios.de
+L:	linux-uvc-devel@lists.berlios.de
 L:	video4linux-list@redhat.com
 W:	http://linux-uvc.berlios.de
 S:	Maintained
@@ -4413,7 +4378,7 @@ S:	Maintained
 USB W996[87]CF DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@@ -4427,7 +4392,7 @@ S:	Maintained
 USB ZC0301 DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@@ -4435,14 +4400,14 @@ S:	Maintained
 USB ZD1201 DRIVER
 P:	Jeroen Vreeken
 M:	pe1rxq@amsat.org
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://linux-lc100020.sourceforge.net
 S:	Maintained
 
 USB ZR364XX DRIVER
 P:	Antoine Jacquet
 M:	royale@zerezo.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://royale.zerezo.com/zr364xx/
 S:	Maintained
@@ -4509,6 +4474,15 @@ M:	kaber@trash.net
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+VOLTAGE AND CURRENT REGULATOR FRAMEWORK
+P:	Liam Girdwood
+M:	lg@opensource.wolfsonmicro.com
+P:	Mark Brown
+M:	broonie@opensource.wolfsonmicro.com
+W:	http://opensource.wolfsonmicro.com/node/15
+T:	git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
+S:	Supported
+
 VT1211 HARDWARE MONITOR DRIVER
 P:	Juerg Haefliger
 M:	juergh@gmail.com
@@ -4663,12 +4637,6 @@ L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 
-ZF MACHZ WATCHDOG
-P:	Fernando Fuganti
-M:	fuganti@netbank.com.br
-W:	http://cvs.conectiva.com.br/drivers/ZFL-watchdog/
-S:	Maintained
-
 ZR36067 VIDEO FOR LINUX DRIVER
 P:	Ronald Bultje
 M:	rbultje@ronald.bitfreak.net
diff --git a/Makefile b/Makefile
index aa527a46c80..cab896a9729 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc7
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
@@ -822,6 +822,9 @@ endif
 ifdef CONFIG_SAMPLES
 	$(Q)$(MAKE) $(build)=samples
 endif
+ifdef CONFIG_BUILD_DOCSRC
+	$(Q)$(MAKE) $(build)=Documentation
+endif
 	$(call vmlinux-modpost)
 	$(call if_changed_rule,vmlinux__)
 	$(Q)rm -f .old_version
@@ -929,10 +932,10 @@ ifneq ($(KBUILD_SRC),)
 		echo "  in the '$(srctree)' directory.";\
 		/bin/false; \
 	fi;
-	$(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
-	$(Q)if [ -e $(srctree)/include/asm-$(SRCARCH)/system.h ]; then  \
+	$(Q)if [ ! -d include2 ]; then                                  \
+	    mkdir -p include2;                                          \
 	    ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm;     \
-	    fi
+	fi
 endif
 
 # prepare2 creates a makefile if using a separate output directory
@@ -1166,7 +1169,7 @@ MRPROPER_FILES += .config .config.old include/asm .version .old_version \
 #
 clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
-clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
+clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation)
 
 PHONY += $(clean-dirs) clean archclean
 $(clean-dirs):
@@ -1492,7 +1495,7 @@ quiet_cmd_cscope-file = FILELST cscope.files
       cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
 
 quiet_cmd_cscope = MAKE    cscope.out
-      cmd_cscope = cscope -b
+      cmd_cscope = cscope -b -f cscope.out
 
 cscope: FORCE
 	$(call cmd,cscope-file)
diff --git a/include/asm-alpha/8253pit.h b/arch/alpha/include/asm/8253pit.h
index fef5c1450e4..fef5c1450e4 100644
--- a/include/asm-alpha/8253pit.h
+++ b/arch/alpha/include/asm/8253pit.h
diff --git a/include/asm-alpha/Kbuild b/arch/alpha/include/asm/Kbuild
index b7c8f188b31..b7c8f188b31 100644
--- a/include/asm-alpha/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
diff --git a/include/asm-alpha/a.out-core.h b/arch/alpha/include/asm/a.out-core.h
index 9e33e92e524..9e33e92e524 100644
--- a/include/asm-alpha/a.out-core.h
+++ b/arch/alpha/include/asm/a.out-core.h
diff --git a/include/asm-alpha/a.out.h b/arch/alpha/include/asm/a.out.h
index 02ce8473870..02ce8473870 100644
--- a/include/asm-alpha/a.out.h
+++ b/arch/alpha/include/asm/a.out.h
diff --git a/include/asm-alpha/agp.h b/arch/alpha/include/asm/agp.h
index 26c17913529..26c17913529 100644
--- a/include/asm-alpha/agp.h
+++ b/arch/alpha/include/asm/agp.h
diff --git a/include/asm-alpha/agp_backend.h b/arch/alpha/include/asm/agp_backend.h
index 55dd44a2cea..55dd44a2cea 100644
--- a/include/asm-alpha/agp_backend.h
+++ b/arch/alpha/include/asm/agp_backend.h
diff --git a/include/asm-alpha/atomic.h b/arch/alpha/include/asm/atomic.h
index ca88e54dec9..ca88e54dec9 100644
--- a/include/asm-alpha/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
diff --git a/include/asm-alpha/auxvec.h b/arch/alpha/include/asm/auxvec.h
index e96fe880e31..e96fe880e31 100644
--- a/include/asm-alpha/auxvec.h
+++ b/arch/alpha/include/asm/auxvec.h
diff --git a/include/asm-alpha/barrier.h b/arch/alpha/include/asm/barrier.h
index ac78eba909b..ac78eba909b 100644
--- a/include/asm-alpha/barrier.h
+++ b/arch/alpha/include/asm/barrier.h
diff --git a/include/asm-alpha/bitops.h b/arch/alpha/include/asm/bitops.h
index 15f3ae25c51..15f3ae25c51 100644
--- a/include/asm-alpha/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
diff --git a/include/asm-alpha/bug.h b/arch/alpha/include/asm/bug.h
index 695a5ee4b5d..695a5ee4b5d 100644
--- a/include/asm-alpha/bug.h
+++ b/arch/alpha/include/asm/bug.h
diff --git a/include/asm-alpha/bugs.h b/arch/alpha/include/asm/bugs.h
index 78030d1c7e7..78030d1c7e7 100644
--- a/include/asm-alpha/bugs.h
+++ b/arch/alpha/include/asm/bugs.h
diff --git a/include/asm-alpha/byteorder.h b/arch/alpha/include/asm/byteorder.h
index 58e958fc7f1..58e958fc7f1 100644
--- a/include/asm-alpha/byteorder.h
+++ b/arch/alpha/include/asm/byteorder.h
diff --git a/include/asm-alpha/cache.h b/arch/alpha/include/asm/cache.h
index f199e69a5d0..f199e69a5d0 100644
--- a/include/asm-alpha/cache.h
+++ b/arch/alpha/include/asm/cache.h
diff --git a/include/asm-alpha/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
index b686cc7fc44..b686cc7fc44 100644
--- a/include/asm-alpha/cacheflush.h
+++ b/arch/alpha/include/asm/cacheflush.h
diff --git a/include/asm-alpha/checksum.h b/arch/alpha/include/asm/checksum.h
index d3854bbf0a9..d3854bbf0a9 100644
--- a/include/asm-alpha/checksum.h
+++ b/arch/alpha/include/asm/checksum.h
diff --git a/include/asm-alpha/compiler.h b/arch/alpha/include/asm/compiler.h
index da6bb199839..da6bb199839 100644
--- a/include/asm-alpha/compiler.h
+++ b/arch/alpha/include/asm/compiler.h
diff --git a/include/asm-alpha/console.h b/arch/alpha/include/asm/console.h
index a3ce4e62249..a3ce4e62249 100644
--- a/include/asm-alpha/console.h
+++ b/arch/alpha/include/asm/console.h
diff --git a/include/asm-alpha/core_apecs.h b/arch/alpha/include/asm/core_apecs.h
index 6785ff7e02b..6785ff7e02b 100644
--- a/include/asm-alpha/core_apecs.h
+++ b/arch/alpha/include/asm/core_apecs.h
diff --git a/include/asm-alpha/core_cia.h b/arch/alpha/include/asm/core_cia.h
index 9e0516c0ca2..9e0516c0ca2 100644
--- a/include/asm-alpha/core_cia.h
+++ b/arch/alpha/include/asm/core_cia.h
diff --git a/include/asm-alpha/core_irongate.h b/arch/alpha/include/asm/core_irongate.h
index 24b2db54150..24b2db54150 100644
--- a/include/asm-alpha/core_irongate.h
+++ b/arch/alpha/include/asm/core_irongate.h
diff --git a/include/asm-alpha/core_lca.h b/arch/alpha/include/asm/core_lca.h
index f7cb4b46095..f7cb4b46095 100644
--- a/include/asm-alpha/core_lca.h
+++ b/arch/alpha/include/asm/core_lca.h
diff --git a/include/asm-alpha/core_marvel.h b/arch/alpha/include/asm/core_marvel.h
index 30d55fe7aaf..30d55fe7aaf 100644
--- a/include/asm-alpha/core_marvel.h
+++ b/arch/alpha/include/asm/core_marvel.h
diff --git a/include/asm-alpha/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
index acf55b48347..acf55b48347 100644
--- a/include/asm-alpha/core_mcpcia.h
+++ b/arch/alpha/include/asm/core_mcpcia.h
diff --git a/include/asm-alpha/core_polaris.h b/arch/alpha/include/asm/core_polaris.h
index 2f966b64659..2f966b64659 100644
--- a/include/asm-alpha/core_polaris.h
+++ b/arch/alpha/include/asm/core_polaris.h
diff --git a/include/asm-alpha/core_t2.h b/arch/alpha/include/asm/core_t2.h
index 46bfff58f67..46bfff58f67 100644
--- a/include/asm-alpha/core_t2.h
+++ b/arch/alpha/include/asm/core_t2.h
diff --git a/include/asm-alpha/core_titan.h b/arch/alpha/include/asm/core_titan.h
index a17f6f33b68..a17f6f33b68 100644
--- a/include/asm-alpha/core_titan.h
+++ b/arch/alpha/include/asm/core_titan.h
diff --git a/include/asm-alpha/core_tsunami.h b/arch/alpha/include/asm/core_tsunami.h
index 58d4fe48742..58d4fe48742 100644
--- a/include/asm-alpha/core_tsunami.h
+++ b/arch/alpha/include/asm/core_tsunami.h
diff --git a/include/asm-alpha/core_wildfire.h b/arch/alpha/include/asm/core_wildfire.h
index cd562f544ba..cd562f544ba 100644
--- a/include/asm-alpha/core_wildfire.h
+++ b/arch/alpha/include/asm/core_wildfire.h
diff --git a/include/asm-alpha/cputime.h b/arch/alpha/include/asm/cputime.h
index 19577fd9323..19577fd9323 100644
--- a/include/asm-alpha/cputime.h
+++ b/arch/alpha/include/asm/cputime.h
diff --git a/include/asm-alpha/current.h b/arch/alpha/include/asm/current.h
index 094d285a1b3..094d285a1b3 100644
--- a/include/asm-alpha/current.h
+++ b/arch/alpha/include/asm/current.h
diff --git a/include/asm-alpha/delay.h b/arch/alpha/include/asm/delay.h
index 2aa3f410f7e..2aa3f410f7e 100644
--- a/include/asm-alpha/delay.h
+++ b/arch/alpha/include/asm/delay.h
diff --git a/include/asm-alpha/device.h b/arch/alpha/include/asm/device.h
index d8f9872b0e2..d8f9872b0e2 100644
--- a/include/asm-alpha/device.h
+++ b/arch/alpha/include/asm/device.h
diff --git a/include/asm-alpha/div64.h b/arch/alpha/include/asm/div64.h
index 6cd978cefb2..6cd978cefb2 100644
--- a/include/asm-alpha/div64.h
+++ b/arch/alpha/include/asm/div64.h
diff --git a/include/asm-alpha/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index a5801ae02e4..a5801ae02e4 100644
--- a/include/asm-alpha/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
diff --git a/include/asm-alpha/dma.h b/arch/alpha/include/asm/dma.h
index 87cfdbdf08f..87cfdbdf08f 100644
--- a/include/asm-alpha/dma.h
+++ b/arch/alpha/include/asm/dma.h
diff --git a/include/asm-alpha/elf.h b/arch/alpha/include/asm/elf.h
index fc1002ea1e0..fc1002ea1e0 100644
--- a/include/asm-alpha/elf.h
+++ b/arch/alpha/include/asm/elf.h
diff --git a/include/asm-alpha/emergency-restart.h b/arch/alpha/include/asm/emergency-restart.h
index 108d8c48e42..108d8c48e42 100644
--- a/include/asm-alpha/emergency-restart.h
+++ b/arch/alpha/include/asm/emergency-restart.h
diff --git a/include/asm-alpha/err_common.h b/arch/alpha/include/asm/err_common.h
index c2509594210..c2509594210 100644
--- a/include/asm-alpha/err_common.h
+++ b/arch/alpha/include/asm/err_common.h
diff --git a/include/asm-alpha/err_ev6.h b/arch/alpha/include/asm/err_ev6.h
index ea637791e4a..ea637791e4a 100644
--- a/include/asm-alpha/err_ev6.h
+++ b/arch/alpha/include/asm/err_ev6.h
diff --git a/include/asm-alpha/err_ev7.h b/arch/alpha/include/asm/err_ev7.h
index 87f99777c2e..87f99777c2e 100644
--- a/include/asm-alpha/err_ev7.h
+++ b/arch/alpha/include/asm/err_ev7.h
diff --git a/include/asm-alpha/errno.h b/arch/alpha/include/asm/errno.h
index 69e2655249d..69e2655249d 100644
--- a/include/asm-alpha/errno.h
+++ b/arch/alpha/include/asm/errno.h
diff --git a/include/asm-alpha/fb.h b/arch/alpha/include/asm/fb.h
index fa9bbb96b2b..fa9bbb96b2b 100644
--- a/include/asm-alpha/fb.h
+++ b/arch/alpha/include/asm/fb.h
diff --git a/include/asm-alpha/fcntl.h b/arch/alpha/include/asm/fcntl.h
index 25da0017ec8..25da0017ec8 100644
--- a/include/asm-alpha/fcntl.h
+++ b/arch/alpha/include/asm/fcntl.h
diff --git a/include/asm-alpha/floppy.h b/arch/alpha/include/asm/floppy.h
index 0be50413b2b..0be50413b2b 100644
--- a/include/asm-alpha/floppy.h
+++ b/arch/alpha/include/asm/floppy.h
diff --git a/include/asm-alpha/fpu.h b/arch/alpha/include/asm/fpu.h
index ecb17a72acc..ecb17a72acc 100644
--- a/include/asm-alpha/fpu.h
+++ b/arch/alpha/include/asm/fpu.h
diff --git a/include/asm-alpha/futex.h b/arch/alpha/include/asm/futex.h
index 6a332a9f099..6a332a9f099 100644
--- a/include/asm-alpha/futex.h
+++ b/arch/alpha/include/asm/futex.h
diff --git a/include/asm-alpha/gct.h b/arch/alpha/include/asm/gct.h
index 3504c704927..3504c704927 100644
--- a/include/asm-alpha/gct.h
+++ b/arch/alpha/include/asm/gct.h
diff --git a/include/asm-alpha/gentrap.h b/arch/alpha/include/asm/gentrap.h
index ae50cc3192c..ae50cc3192c 100644
--- a/include/asm-alpha/gentrap.h
+++ b/arch/alpha/include/asm/gentrap.h
diff --git a/include/asm-alpha/hardirq.h b/arch/alpha/include/asm/hardirq.h
index d953e234daa..d953e234daa 100644
--- a/include/asm-alpha/hardirq.h
+++ b/arch/alpha/include/asm/hardirq.h
diff --git a/include/asm-alpha/hw_irq.h b/arch/alpha/include/asm/hw_irq.h
index a37db0f9509..a37db0f9509 100644
--- a/include/asm-alpha/hw_irq.h
+++ b/arch/alpha/include/asm/hw_irq.h
diff --git a/include/asm-alpha/hwrpb.h b/arch/alpha/include/asm/hwrpb.h
index 8e8f871af7c..8e8f871af7c 100644
--- a/include/asm-alpha/hwrpb.h
+++ b/arch/alpha/include/asm/hwrpb.h
diff --git a/include/asm-alpha/io.h b/arch/alpha/include/asm/io.h
index e971ab000f9..e971ab000f9 100644
--- a/include/asm-alpha/io.h
+++ b/arch/alpha/include/asm/io.h
diff --git a/include/asm-alpha/io_trivial.h b/arch/alpha/include/asm/io_trivial.h
index 1c77f10b4b3..1c77f10b4b3 100644
--- a/include/asm-alpha/io_trivial.h
+++ b/arch/alpha/include/asm/io_trivial.h
diff --git a/include/asm-alpha/ioctl.h b/arch/alpha/include/asm/ioctl.h
index fc63727f417..fc63727f417 100644
--- a/include/asm-alpha/ioctl.h
+++ b/arch/alpha/include/asm/ioctl.h
diff --git a/include/asm-alpha/ioctls.h b/arch/alpha/include/asm/ioctls.h
index 67bb9f6fdbe..67bb9f6fdbe 100644
--- a/include/asm-alpha/ioctls.h
+++ b/arch/alpha/include/asm/ioctls.h
diff --git a/include/asm-alpha/ipcbuf.h b/arch/alpha/include/asm/ipcbuf.h
index d9c0e1a5070..d9c0e1a5070 100644
--- a/include/asm-alpha/ipcbuf.h
+++ b/arch/alpha/include/asm/ipcbuf.h
diff --git a/include/asm-alpha/irq.h b/arch/alpha/include/asm/irq.h
index 06377400dc0..06377400dc0 100644
--- a/include/asm-alpha/irq.h
+++ b/arch/alpha/include/asm/irq.h
diff --git a/include/asm-alpha/irq_regs.h b/arch/alpha/include/asm/irq_regs.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-alpha/irq_regs.h
+++ b/arch/alpha/include/asm/irq_regs.h
diff --git a/include/asm-alpha/jensen.h b/arch/alpha/include/asm/jensen.h
index 964b06ead43..964b06ead43 100644
--- a/include/asm-alpha/jensen.h
+++ b/arch/alpha/include/asm/jensen.h
diff --git a/include/asm-alpha/kdebug.h b/arch/alpha/include/asm/kdebug.h
index 6ece1b03766..6ece1b03766 100644
--- a/include/asm-alpha/kdebug.h
+++ b/arch/alpha/include/asm/kdebug.h
diff --git a/include/asm-alpha/kmap_types.h b/arch/alpha/include/asm/kmap_types.h
index 3e6735a34c5..3e6735a34c5 100644
--- a/include/asm-alpha/kmap_types.h
+++ b/arch/alpha/include/asm/kmap_types.h
diff --git a/include/asm-alpha/linkage.h b/arch/alpha/include/asm/linkage.h
index 291c2d01c44..291c2d01c44 100644
--- a/include/asm-alpha/linkage.h
+++ b/arch/alpha/include/asm/linkage.h
diff --git a/include/asm-alpha/local.h b/arch/alpha/include/asm/local.h
index 6ad3ea69642..6ad3ea69642 100644
--- a/include/asm-alpha/local.h
+++ b/arch/alpha/include/asm/local.h
diff --git a/include/asm-alpha/machvec.h b/arch/alpha/include/asm/machvec.h
index a86c083cdf7..a86c083cdf7 100644
--- a/include/asm-alpha/machvec.h
+++ b/arch/alpha/include/asm/machvec.h
diff --git a/include/asm-alpha/mc146818rtc.h b/arch/alpha/include/asm/mc146818rtc.h
index 097703f1c8c..097703f1c8c 100644
--- a/include/asm-alpha/mc146818rtc.h
+++ b/arch/alpha/include/asm/mc146818rtc.h
diff --git a/include/asm-alpha/md.h b/arch/alpha/include/asm/md.h
index 6c9b8222a4f..6c9b8222a4f 100644
--- a/include/asm-alpha/md.h
+++ b/arch/alpha/include/asm/md.h
diff --git a/include/asm-alpha/mman.h b/arch/alpha/include/asm/mman.h
index 90d7c35d286..90d7c35d286 100644
--- a/include/asm-alpha/mman.h
+++ b/arch/alpha/include/asm/mman.h
diff --git a/include/asm-alpha/mmu.h b/arch/alpha/include/asm/mmu.h
index 3dc12777932..3dc12777932 100644
--- a/include/asm-alpha/mmu.h
+++ b/arch/alpha/include/asm/mmu.h
diff --git a/include/asm-alpha/mmu_context.h b/arch/alpha/include/asm/mmu_context.h
index 86c08a02d23..86c08a02d23 100644
--- a/include/asm-alpha/mmu_context.h
+++ b/arch/alpha/include/asm/mmu_context.h
diff --git a/include/asm-alpha/mmzone.h b/arch/alpha/include/asm/mmzone.h
index 8af56ce346a..8af56ce346a 100644
--- a/include/asm-alpha/mmzone.h
+++ b/arch/alpha/include/asm/mmzone.h
diff --git a/include/asm-alpha/module.h b/arch/alpha/include/asm/module.h
index 7b63743c534..7b63743c534 100644
--- a/include/asm-alpha/module.h
+++ b/arch/alpha/include/asm/module.h
diff --git a/include/asm-alpha/msgbuf.h b/arch/alpha/include/asm/msgbuf.h
index 98496501a2b..98496501a2b 100644
--- a/include/asm-alpha/msgbuf.h
+++ b/arch/alpha/include/asm/msgbuf.h
diff --git a/include/asm-alpha/mutex.h b/arch/alpha/include/asm/mutex.h
index 458c1f7fbc1..458c1f7fbc1 100644
--- a/include/asm-alpha/mutex.h
+++ b/arch/alpha/include/asm/mutex.h
diff --git a/include/asm-alpha/page.h b/arch/alpha/include/asm/page.h
index 0995f9d1341..0995f9d1341 100644
--- a/include/asm-alpha/page.h
+++ b/arch/alpha/include/asm/page.h
diff --git a/include/asm-alpha/pal.h b/arch/alpha/include/asm/pal.h
index 9b4ba0d6f00..9b4ba0d6f00 100644
--- a/include/asm-alpha/pal.h
+++ b/arch/alpha/include/asm/pal.h
diff --git a/include/asm-alpha/param.h b/arch/alpha/include/asm/param.h
index e691ecfedb2..e691ecfedb2 100644
--- a/include/asm-alpha/param.h
+++ b/arch/alpha/include/asm/param.h
diff --git a/include/asm-alpha/parport.h b/arch/alpha/include/asm/parport.h
index c5ee7cbb2fc..c5ee7cbb2fc 100644
--- a/include/asm-alpha/parport.h
+++ b/arch/alpha/include/asm/parport.h
diff --git a/include/asm-alpha/pci.h b/arch/alpha/include/asm/pci.h
index 2a14302c17a..2a14302c17a 100644
--- a/include/asm-alpha/pci.h
+++ b/arch/alpha/include/asm/pci.h
diff --git a/include/asm-alpha/percpu.h b/arch/alpha/include/asm/percpu.h
index 3495e8e00d7..3495e8e00d7 100644
--- a/include/asm-alpha/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
diff --git a/include/asm-alpha/pgalloc.h b/arch/alpha/include/asm/pgalloc.h
index fd090155dcc..fd090155dcc 100644
--- a/include/asm-alpha/pgalloc.h
+++ b/arch/alpha/include/asm/pgalloc.h
diff --git a/include/asm-alpha/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 3f0c59f6d8a..3f0c59f6d8a 100644
--- a/include/asm-alpha/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
diff --git a/include/asm-alpha/poll.h b/arch/alpha/include/asm/poll.h
index c98509d3149..c98509d3149 100644
--- a/include/asm-alpha/poll.h
+++ b/arch/alpha/include/asm/poll.h
diff --git a/include/asm-alpha/posix_types.h b/arch/alpha/include/asm/posix_types.h
index db167413300..db167413300 100644
--- a/include/asm-alpha/posix_types.h
+++ b/arch/alpha/include/asm/posix_types.h
diff --git a/include/asm-alpha/processor.h b/arch/alpha/include/asm/processor.h
index 94afe585930..94afe585930 100644
--- a/include/asm-alpha/processor.h
+++ b/arch/alpha/include/asm/processor.h
diff --git a/include/asm-alpha/ptrace.h b/arch/alpha/include/asm/ptrace.h
index 32c7a5cddd5..32c7a5cddd5 100644
--- a/include/asm-alpha/ptrace.h
+++ b/arch/alpha/include/asm/ptrace.h
diff --git a/include/asm-alpha/reg.h b/arch/alpha/include/asm/reg.h
index 86ff916fb06..86ff916fb06 100644
--- a/include/asm-alpha/reg.h
+++ b/arch/alpha/include/asm/reg.h
diff --git a/include/asm-alpha/regdef.h b/arch/alpha/include/asm/regdef.h
index 142df9c4f8b..142df9c4f8b 100644
--- a/include/asm-alpha/regdef.h
+++ b/arch/alpha/include/asm/regdef.h
diff --git a/include/asm-alpha/resource.h b/arch/alpha/include/asm/resource.h
index c10874ff597..c10874ff597 100644
--- a/include/asm-alpha/resource.h
+++ b/arch/alpha/include/asm/resource.h
diff --git a/include/asm-alpha/rtc.h b/arch/alpha/include/asm/rtc.h
index 4e854b1333e..4e854b1333e 100644
--- a/include/asm-alpha/rtc.h
+++ b/arch/alpha/include/asm/rtc.h
diff --git a/include/asm-alpha/rwsem.h b/arch/alpha/include/asm/rwsem.h
index 1570c0b5433..1570c0b5433 100644
--- a/include/asm-alpha/rwsem.h
+++ b/arch/alpha/include/asm/rwsem.h
diff --git a/include/asm-alpha/scatterlist.h b/arch/alpha/include/asm/scatterlist.h
index 440747ca634..440747ca634 100644
--- a/include/asm-alpha/scatterlist.h
+++ b/arch/alpha/include/asm/scatterlist.h
diff --git a/include/asm-alpha/sections.h b/arch/alpha/include/asm/sections.h
index 43b40edd6e4..43b40edd6e4 100644
--- a/include/asm-alpha/sections.h
+++ b/arch/alpha/include/asm/sections.h
diff --git a/include/asm-alpha/segment.h b/arch/alpha/include/asm/segment.h
index 0453d97daae..0453d97daae 100644
--- a/include/asm-alpha/segment.h
+++ b/arch/alpha/include/asm/segment.h
diff --git a/include/asm-alpha/sembuf.h b/arch/alpha/include/asm/sembuf.h
index 7b38b153478..7b38b153478 100644
--- a/include/asm-alpha/sembuf.h
+++ b/arch/alpha/include/asm/sembuf.h
diff --git a/include/asm-alpha/serial.h b/arch/alpha/include/asm/serial.h
index 9d263e8d8cc..9d263e8d8cc 100644
--- a/include/asm-alpha/serial.h
+++ b/arch/alpha/include/asm/serial.h
diff --git a/include/asm-alpha/setup.h b/arch/alpha/include/asm/setup.h
index 2e023a4aa31..2e023a4aa31 100644
--- a/include/asm-alpha/setup.h
+++ b/arch/alpha/include/asm/setup.h
diff --git a/include/asm-alpha/sfp-machine.h b/arch/alpha/include/asm/sfp-machine.h
index 5fe63afbd47..5fe63afbd47 100644
--- a/include/asm-alpha/sfp-machine.h
+++ b/arch/alpha/include/asm/sfp-machine.h
diff --git a/include/asm-alpha/shmbuf.h b/arch/alpha/include/asm/shmbuf.h
index 37ee84f0508..37ee84f0508 100644
--- a/include/asm-alpha/shmbuf.h
+++ b/arch/alpha/include/asm/shmbuf.h
diff --git a/include/asm-alpha/shmparam.h b/arch/alpha/include/asm/shmparam.h
index cc901d58aeb..cc901d58aeb 100644
--- a/include/asm-alpha/shmparam.h
+++ b/arch/alpha/include/asm/shmparam.h
diff --git a/include/asm-alpha/sigcontext.h b/arch/alpha/include/asm/sigcontext.h
index 323cdb02619..323cdb02619 100644
--- a/include/asm-alpha/sigcontext.h
+++ b/arch/alpha/include/asm/sigcontext.h
diff --git a/include/asm-alpha/siginfo.h b/arch/alpha/include/asm/siginfo.h
index 9822362a842..9822362a842 100644
--- a/include/asm-alpha/siginfo.h
+++ b/arch/alpha/include/asm/siginfo.h
diff --git a/include/asm-alpha/signal.h b/arch/alpha/include/asm/signal.h
index 13c2305d35e..13c2305d35e 100644
--- a/include/asm-alpha/signal.h
+++ b/arch/alpha/include/asm/signal.h
diff --git a/include/asm-alpha/smp.h b/arch/alpha/include/asm/smp.h
index 544c69af816..544c69af816 100644
--- a/include/asm-alpha/smp.h
+++ b/arch/alpha/include/asm/smp.h
diff --git a/include/asm-alpha/socket.h b/arch/alpha/include/asm/socket.h
index a1057c2d95e..a1057c2d95e 100644
--- a/include/asm-alpha/socket.h
+++ b/arch/alpha/include/asm/socket.h
diff --git a/include/asm-alpha/sockios.h b/arch/alpha/include/asm/sockios.h
index 7932c7ab4a4..7932c7ab4a4 100644
--- a/include/asm-alpha/sockios.h
+++ b/arch/alpha/include/asm/sockios.h
diff --git a/include/asm-alpha/spinlock.h b/arch/alpha/include/asm/spinlock.h
index aeeb125f685..aeeb125f685 100644
--- a/include/asm-alpha/spinlock.h
+++ b/arch/alpha/include/asm/spinlock.h
diff --git a/include/asm-alpha/spinlock_types.h b/arch/alpha/include/asm/spinlock_types.h
index 8141eb5ebf0..8141eb5ebf0 100644
--- a/include/asm-alpha/spinlock_types.h
+++ b/arch/alpha/include/asm/spinlock_types.h
diff --git a/include/asm-alpha/stat.h b/arch/alpha/include/asm/stat.h
index 07ad3e6b3f3..07ad3e6b3f3 100644
--- a/include/asm-alpha/stat.h
+++ b/arch/alpha/include/asm/stat.h
diff --git a/include/asm-alpha/statfs.h b/arch/alpha/include/asm/statfs.h
index ad15830baef..ad15830baef 100644
--- a/include/asm-alpha/statfs.h
+++ b/arch/alpha/include/asm/statfs.h
diff --git a/include/asm-alpha/string.h b/arch/alpha/include/asm/string.h
index b02b8a28294..b02b8a28294 100644
--- a/include/asm-alpha/string.h
+++ b/arch/alpha/include/asm/string.h
diff --git a/include/asm-alpha/suspend.h b/arch/alpha/include/asm/suspend.h
index c7042d57585..c7042d57585 100644
--- a/include/asm-alpha/suspend.h
+++ b/arch/alpha/include/asm/suspend.h
diff --git a/include/asm-alpha/sysinfo.h b/arch/alpha/include/asm/sysinfo.h
index 086aba284df..086aba284df 100644
--- a/include/asm-alpha/sysinfo.h
+++ b/arch/alpha/include/asm/sysinfo.h
diff --git a/include/asm-alpha/system.h b/arch/alpha/include/asm/system.h
index afe20fa58c9..afe20fa58c9 100644
--- a/include/asm-alpha/system.h
+++ b/arch/alpha/include/asm/system.h
diff --git a/include/asm-alpha/termbits.h b/arch/alpha/include/asm/termbits.h
index ad854a4a3af..ad854a4a3af 100644
--- a/include/asm-alpha/termbits.h
+++ b/arch/alpha/include/asm/termbits.h
diff --git a/include/asm-alpha/termios.h b/arch/alpha/include/asm/termios.h
index fa13716a11c..fa13716a11c 100644
--- a/include/asm-alpha/termios.h
+++ b/arch/alpha/include/asm/termios.h
diff --git a/include/asm-alpha/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 15fda434442..15fda434442 100644
--- a/include/asm-alpha/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
diff --git a/include/asm-alpha/timex.h b/arch/alpha/include/asm/timex.h
index afa0c45e3e9..afa0c45e3e9 100644
--- a/include/asm-alpha/timex.h
+++ b/arch/alpha/include/asm/timex.h
diff --git a/include/asm-alpha/tlb.h b/arch/alpha/include/asm/tlb.h
index c13636575fb..c13636575fb 100644
--- a/include/asm-alpha/tlb.h
+++ b/arch/alpha/include/asm/tlb.h
diff --git a/include/asm-alpha/tlbflush.h b/arch/alpha/include/asm/tlbflush.h
index 9d87aaa08c0..9d87aaa08c0 100644
--- a/include/asm-alpha/tlbflush.h
+++ b/arch/alpha/include/asm/tlbflush.h
diff --git a/include/asm-alpha/topology.h b/arch/alpha/include/asm/topology.h
index 149532e162c..149532e162c 100644
--- a/include/asm-alpha/topology.h
+++ b/arch/alpha/include/asm/topology.h
diff --git a/include/asm-alpha/types.h b/arch/alpha/include/asm/types.h
index c1541353cce..c1541353cce 100644
--- a/include/asm-alpha/types.h
+++ b/arch/alpha/include/asm/types.h
diff --git a/include/asm-alpha/uaccess.h b/arch/alpha/include/asm/uaccess.h
index 22de3b434a2..22de3b434a2 100644
--- a/include/asm-alpha/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
diff --git a/include/asm-alpha/ucontext.h b/arch/alpha/include/asm/ucontext.h
index 47578ab4215..47578ab4215 100644
--- a/include/asm-alpha/ucontext.h
+++ b/arch/alpha/include/asm/ucontext.h
diff --git a/include/asm-alpha/unaligned.h b/arch/alpha/include/asm/unaligned.h
index 3787c60aed3..3787c60aed3 100644
--- a/include/asm-alpha/unaligned.h
+++ b/arch/alpha/include/asm/unaligned.h
diff --git a/include/asm-alpha/unistd.h b/arch/alpha/include/asm/unistd.h
index 5b5c1748594..5b5c1748594 100644
--- a/include/asm-alpha/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
diff --git a/include/asm-alpha/user.h b/arch/alpha/include/asm/user.h
index a4eb6a4ca8d..a4eb6a4ca8d 100644
--- a/include/asm-alpha/user.h
+++ b/arch/alpha/include/asm/user.h
diff --git a/include/asm-alpha/vga.h b/arch/alpha/include/asm/vga.h
index c00106bac52..c00106bac52 100644
--- a/include/asm-alpha/vga.h
+++ b/arch/alpha/include/asm/vga.h
diff --git a/include/asm-alpha/xor.h b/arch/alpha/include/asm/xor.h
index 5ee1c2bc049..5ee1c2bc049 100644
--- a/include/asm-alpha/xor.h
+++ b/arch/alpha/include/asm/xor.h
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 6e943135f0e..8509dad3120 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -121,24 +121,29 @@ osf_filldir(void *__buf, const char *name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	if (buf->basep) {
 		if (put_user(offset, buf->basep))
-			return -EFAULT;
+			goto Efault;
 		buf->basep = NULL;
 	}
 	dirent = buf->dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(namlen, &dirent->d_namlen);
-	put_user(reclen, &dirent->d_reclen);
-	if (copy_to_user(dirent->d_name, name, namlen) ||
+	if (put_user(d_ino, &dirent->d_ino) ||
+	    put_user(namlen, &dirent->d_namlen) ||
+	    put_user(reclen, &dirent->d_reclen) ||
+	    copy_to_user(dirent->d_name, name, namlen) ||
 	    put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
+		goto Efault;
 	dirent = (void __user *)dirent + reclen;
 	buf->dirent = dirent;
 	buf->count -= reclen;
 	return 0;
+Efault:
+	buf->error = -EFAULT;
+	return -EFAULT;
 }
 
 asmlinkage int
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 257033c691f..70dba166890 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -810,6 +810,11 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say Y.
 
+config ARCH_FLATMEM_HAS_HOLES
+	bool
+	default y
+	depends on FLATMEM
+
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
 	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
@@ -1225,6 +1230,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/regulator/Kconfig"
+
 source "drivers/uio/Kconfig"
 
 endmenu
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 2f074774423..703a44fa0f9 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -97,9 +97,7 @@ textofs-y	:= 0x00008000
  machine-$(CONFIG_ARCH_RPC)	   := rpc
  machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
  machine-$(CONFIG_ARCH_CLPS7500)   := clps7500
-  incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
-  incdir-$(CONFIG_FOOTBRIDGE)	   := ebsa285
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -114,13 +112,15 @@ endif
  machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
  machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
  machine-$(CONFIG_ARCH_IOP13XX)	   := iop13xx
+    plat-$(CONFIG_PLAT_IOP)	   := iop
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
-  incdir-$(CONFIG_ARCH_OMAP)	   := omap
- machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410
+    plat-$(CONFIG_ARCH_OMAP)	   := omap
+ machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
  machine-$(CONFIG_ARCH_IMX)	   := imx
@@ -135,10 +135,11 @@ endif
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
  machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
-  incdir-$(CONFIG_ARCH_MXC)	   := mxc
+    plat-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
+    plat-$(CONFIG_PLAT_ORION)	   := orion
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
  machine-$(CONFIG_ARCH_LOKI)       := loki
  machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
@@ -153,17 +154,22 @@ endif
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-ifeq ($(incdir-y),)
-incdir-y := $(machine-y)
-endif
-INCDIR   := arch-$(incdir-y)
-
+# The first directory contains additional information for the boot setup code
 ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(machine-y)/
+MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
 else
 MACHINE  :=
 endif
 
+machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
+platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
+
+ifeq ($(KBUILD_SRC),)
+KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
+else
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
+endif
+
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
@@ -174,23 +180,11 @@ endif
 
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= $(MACHINE)
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2400/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2412/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2440/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2442/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2443/
+core-y				+= $(machdirs) $(platdirs)
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
-# If we have a common platform directory, then include it in the build.
-core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
-core-$(CONFIG_PLAT_ORION)		+= arch/arm/plat-orion/
-core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
-core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
-core-$(CONFIG_ARCH_MXC)		+= arch/arm/plat-mxc/
-
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
@@ -210,20 +204,10 @@ boot := arch/arm/boot
 #	them changed.  We use .arch to indicate when they were updated
 #	last, otherwise make uses the target directory mtime.
 
-include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-arm
-	$(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch
-else
-	$(Q)ln -fsn $(INCDIR) include/asm-arm/arch
-endif
-	@touch $@
-
 archprepare: maketools
 
 PHONY += maketools FORCE
-maketools: include/linux/version.h include/asm-arm/.arch FORCE
+maketools: include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
 # Convert bzImage to zImage
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index b15f927a592..ab204db594d 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,2 +1,3 @@
-piggy.gz
 font.c
+piggy.gz
+vmlinux.lds
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 95baac4939e..94462a097f8 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -112,6 +112,3 @@ $(obj)/font.c: $(FONTC)
 
 $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
 	@sed "$(SEDFLAGS)" < $< > $@
-
-$(obj)/misc.o: $(obj)/misc.c include/asm/arch/uncompress.h lib/inflate.c
-
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index dd3fbd6766e..aa5ee49c5c5 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -6,7 +6,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/mach-types.h>
 
 		.section        ".start", "ax"
 
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index de41daeab5e..d42f89b7760 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -37,7 +37,7 @@
 
 #else
 
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 
 		.macro	writeb,	ch, rb
 		senduart \ch, \rb
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 7145cc7c04f..65ce8fff29d 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -27,7 +27,7 @@ unsigned int __machine_arch_type;
 static void putstr(const char *ptr);
 
 #include <linux/compiler.h>
-#include <asm/arch/uncompress.h>
+#include <mach/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 69130f36590..aecc6c3f908 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -246,9 +246,9 @@ map_single(struct device *dev, void *ptr, size_t size,
 		}
 
 		dev_dbg(dev,
-			"%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
-			__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
-			buf->safe, (void *) buf->safe_dma_addr);
+			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+			buf->safe, buf->safe_dma_addr);
 
 		if ((dir == DMA_TO_DEVICE) ||
 		    (dir == DMA_BIDIRECTIONAL)) {
@@ -292,9 +292,9 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		BUG_ON(buf->size != size);
 
 		dev_dbg(dev,
-			"%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
-			__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
-			buf->safe, (void *) buf->safe_dma_addr);
+			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+			buf->safe, buf->safe_dma_addr);
 
 		DO_STATS ( device_info->bounce_count++ );
 
@@ -321,9 +321,8 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	}
 }
 
-static inline void
-sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction dir)
+static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+			enum dma_data_direction dir)
 {
 	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 	struct safe_buffer *buf = NULL;
@@ -355,9 +354,9 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 */
 
 		dev_dbg(dev,
-			"%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
-			__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
-			buf->safe, (void *) buf->safe_dma_addr);
+			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+			buf->safe, buf->safe_dma_addr);
 
 		DO_STATS ( device_info->bounce_count++ );
 
@@ -383,8 +382,9 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 * No need to sync the safe buffer - it was allocated
 		 * via the coherent allocators.
 		 */
+		return 0;
 	} else {
-		dma_cache_maint(dma_to_virt(dev, dma_addr), size, dir);
+		return 1;
 	}
 }
 
@@ -474,25 +474,29 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
 	}
 }
 
-void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr, size_t size,
-				enum dma_data_direction dir)
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_addr,
+				   unsigned long offset, size_t size,
+				   enum dma_data_direction dir)
 {
-	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
-		__func__, (void *) dma_addr, size, dir);
+	dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
+		__func__, dma_addr, offset, size, dir);
 
-	sync_single(dev, dma_addr, size, dir);
+	if (sync_single(dev, dma_addr, offset + size, dir))
+		dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
 }
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
 
-void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_addr, size_t size,
-				enum dma_data_direction dir)
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_addr,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir)
 {
-	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
-		__func__, (void *) dma_addr, size, dir);
+	dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
+		__func__, dma_addr, offset, size, dir);
 
-	sync_single(dev, dma_addr, size, dir);
+	if (sync_single(dev, dma_addr, offset + size, dir))
+		dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
 }
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
 
 void
 dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
@@ -644,8 +648,6 @@ EXPORT_SYMBOL(dma_map_single);
 EXPORT_SYMBOL(dma_unmap_single);
 EXPORT_SYMBOL(dma_map_sg);
 EXPORT_SYMBOL(dma_unmap_sg);
-EXPORT_SYMBOL(dma_sync_single_for_cpu);
-EXPORT_SYMBOL(dma_sync_single_for_device);
 EXPORT_SYMBOL(dma_sync_sg_for_cpu);
 EXPORT_SYMBOL(dma_sync_sg_for_device);
 EXPORT_SYMBOL(dmabounce_register_dev);
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 85579654d3b..283051eaf93 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index f6d3fdda706..ec8a5471bf0 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -26,7 +26,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 8822b684d47..db830916140 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -26,13 +26,12 @@
 #include <linux/apm-emulation.h>
 #include <linux/suspend.h>
 
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
 /*
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c
index d544da41473..df0983aafe6 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/common/time-acorn.c
@@ -18,7 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/ioc.h>
 
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
index 117cab30bd3..7ecd3c0ab01 100644
--- a/arch/arm/common/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -16,8 +16,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/hardware.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/uengine.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
new file mode 100644
index 00000000000..2c4aa11f0b0
--- /dev/null
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 04:28:32 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=m
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+CONFIG_MACH_AMS_DELTA=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+CONFIG_OMAP_ARM_150MHZ=y
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_AMS_DELTA=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_AMS_DELTA=y
+# CONFIG_LEDS_OMAP_DEBUG is not set
+# CONFIG_LEDS_OMAP is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_CLEAN_4x6 is not set
+# CONFIG_FONT_CLEAN_5x8 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index be2b2f38fd9..bf97801a106 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -170,7 +170,7 @@ CONFIG_MACH_AT91CAP9ADK=y
 # AT91 Board Options
 #
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -442,7 +442,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 2011adfa675..38e6a0abeb4 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -176,7 +176,7 @@ CONFIG_MACH_AT91SAM9260EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 4049768962d..93b779f94b4 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9261EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -433,7 +433,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index fa1c5aecb5a..a7ddd94363c 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9263EK=y
 # AT91 Board Options
 #
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -428,7 +428,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index c0686384736..df0d6ee672b 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -168,7 +168,7 @@ CONFIG_MACH_AT91SAM9G20EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -442,10 +442,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index d8ec5f9ca6e..1c76642272a 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -392,7 +392,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index f3cd4a95373..f945105d6cd 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -466,10 +466,10 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set
-CONFIG_MTD_NAND_AT91_ECC_HW=y
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
new file mode 100644
index 00000000000..568ef1770d5
--- /dev/null
+++ b/arch/arm/configs/n770_defconfig
@@ -0,0 +1,1421 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc8-omap1
+# Fri Jan 18 10:21:06 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_BOOT_TAG=y
+CONFIG_OMAP_BOOT_REASON=y
+CONFIG_OMAP_COMPONENT_VERSION=y
+CONFIG_OMAP_GPIO_SWITCH=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_STI=y
+CONFIG_OMAP_STI_CONSOLE=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+CONFIG_MACH_NOKIA770=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+CONFIG_OMAP_ARM_216MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+CONFIG_BT_HCIBRF6150=y
+# CONFIG_BT_HCIH4P is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP_HW=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_TLV320AIC23=y
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCDC_EXTERNAL=y
+CONFIG_FB_OMAP_LCDC_HWA742=y
+# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
+CONFIG_FB_OMAP_MANUAL_UPDATE=y
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_DUMMY=y
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_OMAP_AIC23=y
+# CONFIG_SND_OMAP_TSC2101 is not set
+# CONFIG_SND_SX1 is not set
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# CBUS support
+#
+CONFIG_CBUS=y
+CONFIG_CBUS_TAHVO=y
+CONFIG_CBUS_TAHVO_USER=y
+CONFIG_CBUS_TAHVO_USB=y
+# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
+CONFIG_CBUS_RETU=y
+CONFIG_CBUS_RETU_USER=y
+CONFIG_CBUS_RETU_POWERBUTTON=y
+CONFIG_CBUS_RETU_RTC=y
+CONFIG_CBUS_RETU_WDT=y
+# CONFIG_CBUS_RETU_HEADSET is not set
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_LOWMEM is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
new file mode 100644
index 00000000000..b0617c0da2a
--- /dev/null
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -0,0 +1,1304 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:47:37 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+# CONFIG_OMAP_MUX_WARNINGS is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+# CONFIG_ARCH_OMAP2420 is not set
+CONFIG_ARCH_OMAP2430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+CONFIG_MACH_OMAP_2430SDP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_OMAP is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_GPIO=y
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MENELAUS is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_OMAP24XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 243x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP_HS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
new file mode 100644
index 00000000000..bb39dfc72d6
--- /dev/null
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -0,0 +1,962 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 12:07:29 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+CONFIG_MACH_OMAP_APOLLON=y
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OMAP2 is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HID is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
new file mode 100644
index 00000000000..4b1c252f209
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -0,0 +1,1172 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 12:20:19 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
new file mode 100644
index 00000000000..fc66f019d56
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -0,0 +1,1178 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 13:01:27 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig
new file mode 100644
index 00000000000..0a00a708a4f
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1710_defconfig
@@ -0,0 +1,1088 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 13:02:08 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARTHUR=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+# CONFIG_USB_AN2720 is not set
+# CONFIG_USB_BELKIN is not set
+# CONFIG_USB_ARMLINUX is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_LOWMEM is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig
new file mode 100644
index 00000000000..cf4073b47aa
--- /dev/null
+++ b/arch/arm/configs/omap_generic_2420_defconfig
@@ -0,0 +1,655 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:44:48 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_DSP is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+CONFIG_ZBOOT_ROM_BSS=0x10200000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 323c1deeb95..c03507202f3 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Mar  3 03:39:48 2008
+# Linux kernel version: 2.6.25-rc2-omap1
+# Wed Feb 20 17:12:36 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -31,7 +31,6 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
@@ -50,7 +49,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -65,6 +64,7 @@ CONFIG_SYSCTL=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -165,20 +165,28 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
 # CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
 
 #
 # OMAP Feature Selections
 #
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 # CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+CONFIG_OMAP_GPIO_SWITCH=y
 CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
 CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
@@ -206,10 +214,10 @@ CONFIG_MACH_OMAP_H2=y
 #
 # CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 # CONFIG_OMAP_ARM_216MHZ is not set
-CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
 # CONFIG_OMAP_ARM_168MHZ is not set
 # CONFIG_OMAP_ARM_120MHZ is not set
-# CONFIG_OMAP_ARM_60MHZ is not set
+CONFIG_OMAP_ARM_60MHZ=y
 # CONFIG_OMAP_ARM_30MHZ is not set
 
 #
@@ -227,6 +235,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -257,10 +266,9 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
+# CONFIG_PREEMPT is not set
 CONFIG_HZ=128
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -275,7 +283,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -283,7 +292,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 # CONFIG_ATAGS_PROC is not set
@@ -291,20 +300,7 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
 #
 # CPU Frequency scaling
 #
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ is not set
 
 #
 # Floating point emulation
@@ -322,8 +318,9 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
 
 #
 # Power management options
@@ -433,21 +430,102 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+CONFIG_DEBUG_DRIVER=y
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -457,42 +535,9 @@ CONFIG_MISC_DEVICES=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -509,6 +554,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -523,6 +569,15 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -612,7 +667,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -638,6 +694,7 @@ CONFIG_I2C_OMAP=y
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -647,8 +704,10 @@ CONFIG_I2C_OMAP=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_ISP1301_OMAP=y
 CONFIG_TPS65010=y
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -659,8 +718,26 @@ CONFIG_TPS65010=y
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_TSC2101=y
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -673,7 +750,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -683,6 +759,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -712,6 +789,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_TSC210X is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
@@ -723,6 +801,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_OMAP_WATCHDOG is not set
 
 #
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
 # Sonics Silicon Backplane
 #
 CONFIG_SSB_POSSIBLE=y
@@ -740,6 +823,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -749,9 +833,9 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -769,7 +853,11 @@ CONFIG_FB_MODE_HELPERS=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -785,17 +873,9 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
+# CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -804,37 +884,204 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # Sound
 #
-CONFIG_SOUND=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Advanced Linux Sound Architecture
+# USB Input Devices
 #
-# CONFIG_SND is not set
+# CONFIG_USB_HID is not set
 
 #
-# Open Sound System
+# USB HID Boot Protocol drivers
 #
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+# CONFIG_OMAP_DSP is not set
 
 #
 # File systems
@@ -894,6 +1141,17 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -904,19 +1162,16 @@ CONFIG_ROMFS_FS=y
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
 # CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -981,11 +1236,38 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
@@ -994,31 +1276,29 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
 # CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_GCM is not set
 # CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -1052,6 +1332,7 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
new file mode 100644
index 00000000000..5bc89185a64
--- /dev/null
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -0,0 +1,1120 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:44:58 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_DEVICES=y
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+CONFIG_MACH_OMAP_H4=y
+# CONFIG_MACH_OMAP_H4_TUSB is not set
+# CONFIG_MACH_OMAP_H4_OTG is not set
+# CONFIG_MACH_OMAP2_H4_USB1 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=y
+CONFIG_IRCOMM=y
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_OMAP_IR=y
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+CONFIG_GPIOEXPANDER_OMAP=y
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_MENELAUS=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
new file mode 100644
index 00000000000..55b2611bd90
--- /dev/null
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -0,0 +1,1253 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:02 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_INNOVATOR=y
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+CONFIG_OMAP_PS2=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig
new file mode 100644
index 00000000000..95d9f2be53e
--- /dev/null
+++ b/arch/arm/configs/omap_innovator_1610_defconfig
@@ -0,0 +1,839 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:05 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_INNOVATOR=y
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index d4ca5e6e4ff..b68e0144cab 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Mar  3 03:35:17 2008
+# Linux kernel version: 2.6.24-rc3-omap1
+# Fri Nov 23 12:24:12 2007
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,7 +21,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,22 +39,17 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -69,26 +63,18 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -116,8 +102,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System Type
@@ -146,7 +130,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -156,7 +139,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
 
 #
 # TI OMAP Implementations
@@ -164,16 +146,22 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
 # CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
 
 #
 # OMAP Feature Selections
 #
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
 CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MUX_DEBUG is not set
 CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -182,6 +170,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
 CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
 
 #
 # OMAP Core Type
@@ -193,13 +182,13 @@ CONFIG_ARCH_OMAP16XX=y
 #
 # OMAP Board Type
 #
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_MACH_OMAP_H3=y
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
 CONFIG_MACH_OMAP_OSK=y
 # CONFIG_OMAP_OSK_MISTRAL is not set
-CONFIG_MACH_NOKIA770=y
-CONFIG_MACH_OMAP_GENERIC=y
+# CONFIG_MACH_NOKIA770 is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
 
 #
 # OMAP CPU Speed
@@ -227,6 +216,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -264,12 +254,11 @@ CONFIG_OMAP_CF=y
 #
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=128
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -295,7 +284,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
 
 #
 # CPU Frequency scaling
@@ -320,6 +308,7 @@ CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
 
 #
 # Power management options
@@ -328,10 +317,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -348,7 +336,6 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -404,7 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -517,13 +503,11 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
 CONFIG_BLK_DEV_IDE=m
 
@@ -545,6 +529,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -578,7 +563,6 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -600,6 +584,7 @@ CONFIG_PPP_MULTILINK=y
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -696,7 +681,6 @@ CONFIG_HW_RANDOM_OMAP=m
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
@@ -724,13 +708,17 @@ CONFIG_I2C_OMAP=y
 #
 # Miscellaneous I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TPS65010=y
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -755,7 +743,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -783,7 +770,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -791,7 +777,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -807,7 +792,6 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 
 #
 # Multimedia devices
@@ -822,11 +806,11 @@ CONFIG_DAB=y
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -844,7 +828,11 @@ CONFIG_FB_MODE_HELPERS=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -891,8 +879,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# USB Gadget Support
+#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
@@ -900,6 +896,11 @@ CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 
 #
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -913,10 +914,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -970,10 +973,8 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1043,6 +1044,9 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1055,6 +1059,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_SAMPLES is not set
@@ -1066,51 +1071,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig
new file mode 100644
index 00000000000..b94800c0e00
--- /dev/null
+++ b/arch/arm/configs/omap_perseus2_730_defconfig
@@ -0,0 +1,928 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:12 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP730=y
+# CONFIG_ARCH_OMAP15XX is not set
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_PERSEUS2=y
+# CONFIG_MACH_OMAP_FSAMPLE is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_195MHZ is not set
+CONFIG_OMAP_ARM_182MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_OMAP is not set
+CONFIG_FB_VIRTUAL=y
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 9578b5d9f9c..4017d83c9d2 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Mon Jun  2 23:54:48 2008
+# Linux kernel version: 2.6.27-rc4
+# Fri Aug 22 12:38:51 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -23,6 +24,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -56,7 +58,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -83,11 +84,17 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -97,12 +104,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -128,7 +136,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -142,8 +149,11 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
 CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_PNX4008 is not set
@@ -195,7 +205,7 @@ CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_TLB_FEROCEON=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -280,10 +290,6 @@ CONFIG_BINFMT_ELF=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +367,7 @@ CONFIG_NET_PKTGEN=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -377,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -499,6 +508,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -575,6 +585,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -641,11 +652,14 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -694,7 +708,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -710,6 +723,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -757,7 +771,14 @@ CONFIG_INPUT_EVDEV=y
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -808,44 +829,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -858,6 +900,7 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -877,7 +920,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
+CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
 # CONFIG_SENSORS_LM80 is not set
@@ -921,9 +964,12 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 
 #
 # Multimedia devices
@@ -954,10 +1000,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -988,6 +1030,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1030,6 +1073,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1038,7 +1082,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1051,7 +1094,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1077,7 +1119,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1111,11 +1155,12 @@ CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_S35390A=y
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1136,6 +1181,27 @@ CONFIG_RTC_DRV_M41T80=y
 #
 # on-CPU RTC drivers
 #
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
 
 #
@@ -1215,6 +1281,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1225,13 +1292,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1317,6 +1383,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1331,11 +1399,13 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1345,7 +1415,18 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1358,6 +1439,7 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_ASYNC_CORE=y
 CONFIG_CRYPTO=y
 
 #
@@ -1403,6 +1485,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1444,6 +1530,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig
new file mode 100644
index 00000000000..40fc6a778e0
--- /dev/null
+++ b/arch/arm/configs/palmte_defconfig
@@ -0,0 +1,761 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Sat May 19 11:04:27 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+CONFIG_MACH_OMAP_PALMTE=y
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_OMAP_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig
new file mode 100644
index 00000000000..e54ced41217
--- /dev/null
+++ b/arch/arm/configs/palmtt_defconfig
@@ -0,0 +1,844 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc3-omap1
+# Sun Oct 29 00:36:12 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+CONFIG_OMAP_LL_DEBUG_UART2=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+CONFIG_MACH_OMAP_PALMTT=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_OMAP_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_TSC2102 is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_OMAP=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_OMAP=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+CONFIG_RTC_DRV_OMAP=y
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# Synchronous Serial Interfaces (SSI)
+#
+# CONFIG_OMAP_UWIRE is not set
+# CONFIG_OMAP_TSC2101 is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
new file mode 100644
index 00000000000..6361922e71c
--- /dev/null
+++ b/arch/arm/configs/palmz71_defconfig
@@ -0,0 +1,891 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 05:13:00 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-z71"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+CONFIG_MACH_OMAP_PALMZ71=y
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_TSC2046 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_TSC210X is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_OMAP=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index ef903bed061..5cbd8158964 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 8688362bcf7..1174e276487 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -429,7 +429,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
new file mode 100644
index 00000000000..853dcdd9f2e
--- /dev/null
+++ b/arch/arm/configs/sx1_defconfig
@@ -0,0 +1,1118 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 05:16:10 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+CONFIG_MACH_SX1=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_CLEAN_4x6 is not set
+# CONFIG_FONT_CLEAN_5x8 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_OMAP_AIC23 is not set
+# CONFIG_SND_OMAP_TSC2101 is not set
+CONFIG_SND_SX1=y
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=y
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+CONFIG_NLS_ISO8859_5=y
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_KOI8_R=y
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 3680bd2df26..fcb4aaabd43 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index 48d455bc736..b786e0407e8 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -450,10 +450,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index 26de37f7468..a9f41c24c9d 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -421,7 +421,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ALAUDA is not set
diff --git a/include/asm-arm/Kbuild b/arch/arm/include/asm/Kbuild
index 73237bd130a..73237bd130a 100644
--- a/include/asm-arm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
diff --git a/include/asm-arm/a.out-core.h b/arch/arm/include/asm/a.out-core.h
index 93d04acaa31..93d04acaa31 100644
--- a/include/asm-arm/a.out-core.h
+++ b/arch/arm/include/asm/a.out-core.h
diff --git a/include/asm-arm/a.out.h b/arch/arm/include/asm/a.out.h
index 79489fdcc8b..79489fdcc8b 100644
--- a/include/asm-arm/a.out.h
+++ b/arch/arm/include/asm/a.out.h
diff --git a/include/asm-arm/assembler.h b/arch/arm/include/asm/assembler.h
index 911393b2c6f..6116e4893c0 100644
--- a/include/asm-arm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/assembler.h
+ *  arch/arm/include/asm/assembler.h
  *
  *  Copyright (C) 1996-2000 Russell King
  *
diff --git a/include/asm-arm/atomic.h b/arch/arm/include/asm/atomic.h
index 3b59f94b5a3..325f881ccb5 100644
--- a/include/asm-arm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/atomic.h
+ *  arch/arm/include/asm/atomic.h
  *
  *  Copyright (C) 1996 Russell King.
  *  Copyright (C) 2002 Deep Blue Solutions Ltd.
diff --git a/include/asm-arm/auxvec.h b/arch/arm/include/asm/auxvec.h
index c0536f6b29a..c0536f6b29a 100644
--- a/include/asm-arm/auxvec.h
+++ b/arch/arm/include/asm/auxvec.h
diff --git a/include/asm-arm/bitops.h b/arch/arm/include/asm/bitops.h
index 9a1db20e032..9a1db20e032 100644
--- a/include/asm-arm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
diff --git a/include/asm-arm/bug.h b/arch/arm/include/asm/bug.h
index 7b62351f097..7b62351f097 100644
--- a/include/asm-arm/bug.h
+++ b/arch/arm/include/asm/bug.h
diff --git a/include/asm-arm/bugs.h b/arch/arm/include/asm/bugs.h
index ca54eb0f12d..a97f1ea708d 100644
--- a/include/asm-arm/bugs.h
+++ b/arch/arm/include/asm/bugs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/bugs.h
+ *  arch/arm/include/asm/bugs.h
  *
  *  Copyright (C) 1995-2003 Russell King
  *
diff --git a/include/asm-arm/byteorder.h b/arch/arm/include/asm/byteorder.h
index e6f7fcdc73b..4fbfb22f65a 100644
--- a/include/asm-arm/byteorder.h
+++ b/arch/arm/include/asm/byteorder.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/byteorder.h
+ *  arch/arm/include/asm/byteorder.h
  *
  * ARM Endian-ness.  In little endian mode, the data bus is connected such
  * that byte accesses appear as:
diff --git a/include/asm-arm/cache.h b/arch/arm/include/asm/cache.h
index 31332c8ac04..cb7a9e97fd7 100644
--- a/include/asm-arm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/cache.h
+ *  arch/arm/include/asm/cache.h
  */
 #ifndef __ASMARM_CACHE_H
 #define __ASMARM_CACHE_H
diff --git a/include/asm-arm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index e68a1cbcc85..9073d9c6567 100644
--- a/include/asm-arm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/cacheflush.h
+ *  arch/arm/include/asm/cacheflush.h
  *
  *  Copyright (C) 1999-2002 Russell King
  *
diff --git a/include/asm-arm/checksum.h b/arch/arm/include/asm/checksum.h
index eaa0efd8d0d..6dcc1643086 100644
--- a/include/asm-arm/checksum.h
+++ b/arch/arm/include/asm/checksum.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/checksum.h
+ *  arch/arm/include/asm/checksum.h
  *
  * IP checksum routines
  *
diff --git a/include/asm-arm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h
index 480c873fa74..480c873fa74 100644
--- a/include/asm-arm/cnt32_to_63.h
+++ b/arch/arm/include/asm/cnt32_to_63.h
diff --git a/include/asm-arm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h
index 3479de9266e..e2b5b0b2116 100644
--- a/include/asm-arm/cpu-multi32.h
+++ b/arch/arm/include/asm/cpu-multi32.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/cpu-multi32.h
+ *  arch/arm/include/asm/cpu-multi32.h
  *
  *  Copyright (C) 2000 Russell King
  *
diff --git a/include/asm-arm/cpu-single.h b/arch/arm/include/asm/cpu-single.h
index 0b120ee3609..f073a6d2a40 100644
--- a/include/asm-arm/cpu-single.h
+++ b/arch/arm/include/asm/cpu-single.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/cpu-single.h
+ *  arch/arm/include/asm/cpu-single.h
  *
  *  Copyright (C) 2000 Russell King
  *
diff --git a/include/asm-arm/cpu.h b/arch/arm/include/asm/cpu.h
index 715426b9b08..634b2d7c612 100644
--- a/include/asm-arm/cpu.h
+++ b/arch/arm/include/asm/cpu.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/cpu.h
+ *  arch/arm/include/asm/cpu.h
  *
  *  Copyright (C) 2004-2005 ARM Ltd.
  *
diff --git a/include/asm-arm/cputime.h b/arch/arm/include/asm/cputime.h
index 3a8002a5fec..3a8002a5fec 100644
--- a/include/asm-arm/cputime.h
+++ b/arch/arm/include/asm/cputime.h
diff --git a/include/asm-arm/current.h b/arch/arm/include/asm/current.h
index 75d21e2a3ff..75d21e2a3ff 100644
--- a/include/asm-arm/current.h
+++ b/arch/arm/include/asm/current.h
diff --git a/include/asm-arm/delay.h b/arch/arm/include/asm/delay.h
index b2deda18154..b2deda18154 100644
--- a/include/asm-arm/delay.h
+++ b/arch/arm/include/asm/delay.h
diff --git a/include/asm-arm/device.h b/arch/arm/include/asm/device.h
index c61642b4060..c61642b4060 100644
--- a/include/asm-arm/device.h
+++ b/arch/arm/include/asm/device.h
diff --git a/include/asm-arm/div64.h b/arch/arm/include/asm/div64.h
index 5001390be95..5001390be95 100644
--- a/include/asm-arm/div64.h
+++ b/arch/arm/include/asm/div64.h
diff --git a/include/asm-arm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 45329fca1b6..7b95d205839 100644
--- a/include/asm-arm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -3,11 +3,48 @@
 
 #ifdef __KERNEL__
 
-#include <linux/mm.h> /* need struct page */
-
+#include <linux/mm_types.h>
 #include <linux/scatterlist.h>
 
 #include <asm-generic/dma-coherent.h>
+#include <asm/memory.h>
+
+/*
+ * page_to_dma/dma_to_virt/virt_to_dma are architecture private functions
+ * used internally by the DMA-mapping API to provide DMA addresses. They
+ * must not be used by drivers.
+ */
+#ifndef __arch_page_to_dma
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+	return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
+}
+
+static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
+{
+	return (void *)__bus_to_virt(addr);
+}
+
+static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
+{
+	return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
+}
+#else
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+	return __arch_page_to_dma(dev, page);
+}
+
+static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
+{
+	return __arch_dma_to_virt(dev, addr);
+}
+
+static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
+{
+	return __arch_virt_to_dma(dev, addr);
+}
+#endif
 
 /*
  * DMA-consistent mapping functions.  These allocate/free a region of
@@ -169,7 +206,7 @@ dma_map_single(struct device *dev, void *cpu_addr, size_t size,
 	if (!arch_is_coherent())
 		dma_cache_maint(cpu_addr, size, dir);
 
-	return virt_to_dma(dev, (unsigned long)cpu_addr);
+	return virt_to_dma(dev, cpu_addr);
 }
 #else
 extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
@@ -195,7 +232,7 @@ dma_map_page(struct device *dev, struct page *page,
 	     unsigned long offset, size_t size,
 	     enum dma_data_direction dir)
 {
-	return dma_map_single(dev, page_address(page) + offset, size, (int)dir);
+	return dma_map_single(dev, page_address(page) + offset, size, dir);
 }
 
 /**
@@ -241,7 +278,7 @@ static inline void
 dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
 	       enum dma_data_direction dir)
 {
-	dma_unmap_single(dev, handle, size, (int)dir);
+	dma_unmap_single(dev, handle, size, dir);
 }
 
 /**
@@ -314,11 +351,12 @@ extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_da
 
 
 /**
- * dma_sync_single_for_cpu
+ * dma_sync_single_range_for_cpu
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
+ * @offset: offset of region to start sync
+ * @size: size of region to sync
+ * @dir: DMA transfer direction (same as passed to dma_map_single)
  *
  * Make physical memory consistent for a single streaming mode DMA
  * translation after a transfer.
@@ -332,25 +370,41 @@ extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_da
  */
 #ifndef CONFIG_DMABOUNCE
 static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
-			enum dma_data_direction dir)
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction dir)
 {
 	if (!arch_is_coherent())
-		dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
+		dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
 }
 
 static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
-			   enum dma_data_direction dir)
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction dir)
 {
 	if (!arch_is_coherent())
-		dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
+		dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
 }
 #else
-extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction);
-extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction);
+extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
+extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
 #endif
 
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
+			enum dma_data_direction dir)
+{
+	dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
+			   enum dma_data_direction dir)
+{
+	dma_sync_single_range_for_device(dev, handle, 0, size, dir);
+}
+
 
 /**
  * dma_sync_sg_for_cpu
diff --git a/include/asm-arm/dma.h b/arch/arm/include/asm/dma.h
index 9f2c5305c26..75154b19311 100644
--- a/include/asm-arm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -6,7 +6,7 @@ typedef unsigned int dmach_t;
 #include <linux/spinlock.h>
 #include <asm/system.h>
 #include <asm/scatterlist.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 /*
  * This is the maximum virtual address which can be DMA'd from.
diff --git a/include/asm-arm/domain.h b/arch/arm/include/asm/domain.h
index 3c12a762530..cc7ef408071 100644
--- a/include/asm-arm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/domain.h
+ *  arch/arm/include/asm/domain.h
  *
  *  Copyright (C) 1999 Russell King.
  *
diff --git a/include/asm-arm/ecard.h b/arch/arm/include/asm/ecard.h
index 5e22881a630..29f2610efc7 100644
--- a/include/asm-arm/ecard.h
+++ b/arch/arm/include/asm/ecard.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/ecard.h
+ * arch/arm/include/asm/ecard.h
  *
  * definitions for expansion cards
  *
diff --git a/include/asm-arm/elf.h b/arch/arm/include/asm/elf.h
index 4ca75162748..4ca75162748 100644
--- a/include/asm-arm/elf.h
+++ b/arch/arm/include/asm/elf.h
diff --git a/include/asm-arm/emergency-restart.h b/arch/arm/include/asm/emergency-restart.h
index 108d8c48e42..108d8c48e42 100644
--- a/include/asm-arm/emergency-restart.h
+++ b/arch/arm/include/asm/emergency-restart.h
diff --git a/include/asm-arm/errno.h b/arch/arm/include/asm/errno.h
index 6e60f0612bb..6e60f0612bb 100644
--- a/include/asm-arm/errno.h
+++ b/arch/arm/include/asm/errno.h
diff --git a/include/asm-arm/fb.h b/arch/arm/include/asm/fb.h
index d92e99cd8c8..d92e99cd8c8 100644
--- a/include/asm-arm/fb.h
+++ b/arch/arm/include/asm/fb.h
diff --git a/include/asm-arm/fcntl.h b/arch/arm/include/asm/fcntl.h
index a80b6607b2e..a80b6607b2e 100644
--- a/include/asm-arm/fcntl.h
+++ b/arch/arm/include/asm/fcntl.h
diff --git a/include/asm-arm/fiq.h b/arch/arm/include/asm/fiq.h
index a3bad09e825..2242ce22ec6 100644
--- a/include/asm-arm/fiq.h
+++ b/arch/arm/include/asm/fiq.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/fiq.h
+ *  arch/arm/include/asm/fiq.h
  *
  * Support for FIQ on ARM architectures.
  * Written by Philip Blundell <philb@gnu.org>, 1998
diff --git a/include/asm-arm/flat.h b/arch/arm/include/asm/flat.h
index 9918aa46d9e..1d77e51907f 100644
--- a/include/asm-arm/flat.h
+++ b/arch/arm/include/asm/flat.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/flat.h -- uClinux flat-format executables
+ * arch/arm/include/asm/flat.h -- uClinux flat-format executables
  */
 
 #ifndef __ARM_FLAT_H__
diff --git a/include/asm-arm/floppy.h b/arch/arm/include/asm/floppy.h
index 41a5e9d6bb6..c9f03eccc9d 100644
--- a/include/asm-arm/floppy.h
+++ b/arch/arm/include/asm/floppy.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/floppy.h
+ *  arch/arm/include/asm/floppy.h
  *
  *  Copyright (C) 1996-2000 Russell King
  *
@@ -12,7 +12,7 @@
 #ifndef __ASM_ARM_FLOPPY_H
 #define __ASM_ARM_FLOPPY_H
 #if 0
-#include <asm/arch/floppy.h>
+#include <mach/floppy.h>
 #endif
 
 #define fd_outb(val,port)			\
diff --git a/include/asm-arm/fpstate.h b/arch/arm/include/asm/fpstate.h
index 392eb533232..ee5e03efc1b 100644
--- a/include/asm-arm/fpstate.h
+++ b/arch/arm/include/asm/fpstate.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/fpstate.h
+ *  arch/arm/include/asm/fpstate.h
  *
  *  Copyright (C) 1995 Russell King
  *
diff --git a/include/asm-arm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 584ef9a8e5a..584ef9a8e5a 100644
--- a/include/asm-arm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
diff --git a/include/asm-arm/futex.h b/arch/arm/include/asm/futex.h
index 6a332a9f099..6a332a9f099 100644
--- a/include/asm-arm/futex.h
+++ b/arch/arm/include/asm/futex.h
diff --git a/include/asm-arm/glue.h b/arch/arm/include/asm/glue.h
index a97a182ba28..a0e39d5d00c 100644
--- a/include/asm-arm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/glue.h
+ *  arch/arm/include/asm/glue.h
  *
  *  Copyright (C) 1997-1999 Russell King
  *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
diff --git a/include/asm-arm/gpio.h b/arch/arm/include/asm/gpio.h
index fff4f800ee4..166a7a3e284 100644
--- a/include/asm-arm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -2,6 +2,6 @@
 #define _ARCH_ARM_GPIO_H
 
 /* not all ARM platforms necessarily support this API ... */
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #endif /* _ARCH_ARM_GPIO_H */
diff --git a/include/asm-arm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 182310b9919..182310b9919 100644
--- a/include/asm-arm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
diff --git a/include/asm-arm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h
index 04be3bdf46b..04be3bdf46b 100644
--- a/include/asm-arm/hardware/arm_timer.h
+++ b/arch/arm/include/asm/hardware/arm_timer.h
diff --git a/include/asm-arm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h
index e521b70713c..e521b70713c 100644
--- a/include/asm-arm/hardware/arm_twd.h
+++ b/arch/arm/include/asm/hardware/arm_twd.h
diff --git a/include/asm-arm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 54029a74039..64f2252a25c 100644
--- a/include/asm-arm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/hardware/cache-l2x0.h
+ * arch/arm/include/asm/hardware/cache-l2x0.h
  *
  * Copyright (C) 2007 ARM Limited
  *
diff --git a/include/asm-arm/hardware/clps7111.h b/arch/arm/include/asm/hardware/clps7111.h
index 8d3228dc177..44477225aed 100644
--- a/include/asm-arm/hardware/clps7111.h
+++ b/arch/arm/include/asm/hardware/clps7111.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/clps7111.h
+ *  arch/arm/include/asm/hardware/clps7111.h
  *
  *  This file contains the hardware definitions of the CLPS7111 internal
  *  registers.
diff --git a/include/asm-arm/hardware/cs89712.h b/arch/arm/include/asm/hardware/cs89712.h
index ad99a3e1b80..f75626933e9 100644
--- a/include/asm-arm/hardware/cs89712.h
+++ b/arch/arm/include/asm/hardware/cs89712.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/cs89712.h
+ *  arch/arm/include/asm/hardware/cs89712.h
  *
  *  This file contains the hardware definitions of the CS89712
  *  additional internal registers.
diff --git a/include/asm-arm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S
index 07c97fb233f..22c689255e6 100644
--- a/include/asm-arm/hardware/debug-8250.S
+++ b/arch/arm/include/asm/hardware/debug-8250.S
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/hardware/debug-8250.S
+ * arch/arm/include/asm/hardware/debug-8250.S
  *
  *  Copyright (C) 1994-1999 Russell King
  *
diff --git a/include/asm-arm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S
index 23c541a9e89..f9fd083eff6 100644
--- a/include/asm-arm/hardware/debug-pl01x.S
+++ b/arch/arm/include/asm/hardware/debug-pl01x.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/hardware/debug-pl01x.S
+/* arch/arm/include/asm/hardware/debug-pl01x.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h
index 546f7077be9..0d7552751aa 100644
--- a/include/asm-arm/hardware/dec21285.h
+++ b/arch/arm/include/asm/hardware/dec21285.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/dec21285.h
+ *  arch/arm/include/asm/hardware/dec21285.h
  *
  *  Copyright (C) 1998 Russell King
  *
@@ -19,7 +19,7 @@
 #define DC21285_PCI_MEM			0x80000000
 
 #ifndef __ASSEMBLY__
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #define DC21285_IO(x)		((volatile unsigned long *)(ARMCSR_BASE+(x)))
 #else
 #define DC21285_IO(x)		(x)
diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S
index 9bb580a5b15..e0af4983723 100644
--- a/include/asm-arm/hardware/entry-macro-iomd.S
+++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/hardware/entry-macro-iomd.S
+ * arch/arm/include/asm/hardware/entry-macro-iomd.S
  *
  * Low-level IRQ helper macros for IOC/IOMD based platforms
  *
diff --git a/include/asm-arm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h
index 017aa68f612..654d5f625c4 100644
--- a/include/asm-arm/hardware/ep7211.h
+++ b/arch/arm/include/asm/hardware/ep7211.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/ep7211.h
+ *  arch/arm/include/asm/hardware/ep7211.h
  *
  *  This file contains the hardware definitions of the EP7211 internal
  *  registers.
diff --git a/include/asm-arm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h
index 0e952e74707..3b43bbeaf1d 100644
--- a/include/asm-arm/hardware/ep7212.h
+++ b/arch/arm/include/asm/hardware/ep7212.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/ep7212.h
+ *  arch/arm/include/asm/hardware/ep7212.h
  *
  *  This file contains the hardware definitions of the EP7212 internal
  *  registers.
diff --git a/include/asm-arm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 966e428ad32..4924914af18 100644
--- a/include/asm-arm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/gic.h
+ *  arch/arm/include/asm/hardware/gic.h
  *
  *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
  *
diff --git a/include/asm-arm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h
index ff8618a441c..554f128a104 100644
--- a/include/asm-arm/hardware/icst307.h
+++ b/arch/arm/include/asm/hardware/icst307.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/icst307.h
+ *  arch/arm/include/asm/hardware/icst307.h
  *
  *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
  *
diff --git a/include/asm-arm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h
index edd5a570440..58f0dc43e2e 100644
--- a/include/asm-arm/hardware/icst525.h
+++ b/arch/arm/include/asm/hardware/icst525.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/icst525.h
+ *  arch/arm/include/asm/hardware/icst525.h
  *
  *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
  *
diff --git a/include/asm-arm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h
index b3b46ef6594..1f6b8013bec 100644
--- a/include/asm-arm/hardware/ioc.h
+++ b/arch/arm/include/asm/hardware/ioc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/ioc.h
+ *  arch/arm/include/asm/hardware/ioc.h
  *
  *  Copyright (C) Russell King
  *
diff --git a/include/asm-arm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h
index 396e55ad06c..9c5afbd71a6 100644
--- a/include/asm-arm/hardware/iomd.h
+++ b/arch/arm/include/asm/hardware/iomd.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/iomd.h
+ *  arch/arm/include/asm/hardware/iomd.h
  *
  *  Copyright (C) 1999 Russell King
  *
diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
index af64676650a..87bff09633a 100644
--- a/include/asm-arm/hardware/iop3xx-adma.h
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -19,7 +19,7 @@
 #define _ADMA_H
 #include <linux/types.h>
 #include <linux/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop_adma.h>
 
 /* Memory copy units */
diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
index 0c9331f9ac2..b69d972b1f7 100644
--- a/include/asm-arm/hardware/iop3xx-gpio.h
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/hardware/iop3xx-gpio.h
+ * arch/arm/include/asm/hardware/iop3xx-gpio.h
  *
  * IOP3xx GPIO wrappers
  *
@@ -25,7 +25,7 @@
 #ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
 #define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 
 #define IOP3XX_N_GPIOS	8
diff --git a/include/asm-arm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 18f6937f501..4b8e7f55992 100644
--- a/include/asm-arm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/hardware/iop3xx.h
+ * arch/arm/include/asm/hardware/iop3xx.h
  *
  * Intel IOP32X and IOP33X register definitions
  *
diff --git a/include/asm-arm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h
index cb7e3611bcb..cb7e3611bcb 100644
--- a/include/asm-arm/hardware/iop_adma.h
+++ b/arch/arm/include/asm/hardware/iop_adma.h
diff --git a/include/asm-arm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 74b5fff7f57..74b5fff7f57 100644
--- a/include/asm-arm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
diff --git a/include/asm-arm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h
index 7ec91168a57..7ec91168a57 100644
--- a/include/asm-arm/hardware/linkup-l1110.h
+++ b/arch/arm/include/asm/hardware/linkup-l1110.h
diff --git a/include/asm-arm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
index fb0645de6f3..954b1be991b 100644
--- a/include/asm-arm/hardware/locomo.h
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/hardware/locomo.h
+ * arch/arm/include/asm/hardware/locomo.h
  *
  * This file contains the definitions for the LoCoMo G/A Chip
  *
diff --git a/include/asm-arm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h
index 8aef5aa0e01..42ba7c167d1 100644
--- a/include/asm-arm/hardware/memc.h
+++ b/arch/arm/include/asm/hardware/memc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/memc.h
+ *  arch/arm/include/asm/hardware/memc.h
  *
  *  Copyright (C) Russell King.
  *
diff --git a/include/asm-arm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h
index 4d497bdb9a9..2811c7e2cfd 100644
--- a/include/asm-arm/hardware/pci_v3.h
+++ b/arch/arm/include/asm/hardware/pci_v3.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/pci_v3.h
+ *  arch/arm/include/asm/hardware/pci_v3.h
  *
  *  Internal header file PCI V3 chip
  *
diff --git a/include/asm-arm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 61b1d05c7df..5da2595759e 100644
--- a/include/asm-arm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/hardware/sa1111.h
+ * arch/arm/include/asm/hardware/sa1111.h
  *
  * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
  *
@@ -12,7 +12,7 @@
 #ifndef _ASM_ARCH_SA1111
 #define _ASM_ARCH_SA1111
 
-#include <asm/arch/bitfield.h>
+#include <mach/bitfield.h>
 
 /*
  * The SA1111 is always located at virtual 0xf4000000, and is always
diff --git a/include/asm-arm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h
index dfb8330599f..dfb8330599f 100644
--- a/include/asm-arm/hardware/scoop.h
+++ b/arch/arm/include/asm/hardware/scoop.h
diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/arch/arm/include/asm/hardware/sharpsl_pm.h
index 2d00db22b98..2d00db22b98 100644
--- a/include/asm-arm/hardware/sharpsl_pm.h
+++ b/arch/arm/include/asm/hardware/sharpsl_pm.h
diff --git a/include/asm-arm/hardware/ssp.h b/arch/arm/include/asm/hardware/ssp.h
index 3b42e181997..3b42e181997 100644
--- a/include/asm-arm/hardware/ssp.h
+++ b/arch/arm/include/asm/hardware/ssp.h
diff --git a/include/asm-arm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h
index b442d65c659..b442d65c659 100644
--- a/include/asm-arm/hardware/uengine.h
+++ b/arch/arm/include/asm/hardware/uengine.h
diff --git a/include/asm-arm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index ed9ca3736a0..263f2c362a3 100644
--- a/include/asm-arm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/vic.h
+ *  arch/arm/include/asm/hardware/vic.h
  *
  *  Copyright (c) ARM Limited 2003.  All rights reserved.
  *
diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h
new file mode 100644
index 00000000000..90831f6f5f5
--- /dev/null
+++ b/arch/arm/include/asm/hw_irq.h
@@ -0,0 +1,27 @@
+/*
+ * Nothing to see here yet
+ */
+#ifndef _ARCH_ARM_HW_IRQ_H
+#define _ARCH_ARM_HW_IRQ_H
+
+static inline void ack_bad_irq(int irq)
+{
+	extern unsigned long irq_err_count;
+	irq_err_count++;
+}
+
+/*
+ * Obsolete inline function for calling irq descriptor handlers.
+ */
+static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc)
+{
+	desc->handle_irq(irq, desc);
+}
+
+void set_irq_flags(unsigned int irq, unsigned int flags);
+
+#define IRQF_VALID	(1 << 0)
+#define IRQF_PROBE	(1 << 1)
+#define IRQF_NOAUTOEN	(1 << 2)
+
+#endif
diff --git a/include/asm-arm/hwcap.h b/arch/arm/include/asm/hwcap.h
index 81f4c899a55..81f4c899a55 100644
--- a/include/asm-arm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
diff --git a/include/asm-arm/ide.h b/arch/arm/include/asm/ide.h
index a48019f99d0..b507ce8e501 100644
--- a/include/asm-arm/ide.h
+++ b/arch/arm/include/asm/ide.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/ide.h
+ *  arch/arm/include/asm/ide.h
  *
  *  Copyright (C) 1994-1996  Linus Torvalds & authors
  */
diff --git a/include/asm-arm/io.h b/arch/arm/include/asm/io.h
index eebe56e74d6..71934856fc2 100644
--- a/include/asm-arm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/io.h
+ *  arch/arm/include/asm/io.h
  *
  *  Copyright (C) 1996-2000 Russell King
  *
@@ -61,8 +61,9 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 #define MT_DEVICE_NONSHARED	1
 #define MT_DEVICE_CACHED	2
 #define MT_DEVICE_IXP2000	3
+#define MT_DEVICE_WC		4
 /*
- * types 4 onwards can be found in asm/mach/map.h and are undefined
+ * types 5 onwards can be found in asm/mach/map.h and are undefined
  * for ioremap
  */
 
@@ -82,7 +83,7 @@ extern void __readwrite_bug(const char *fn);
 /*
  * Now, pick up the machine-defined IO definitions
  */
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 /*
  *  IO port access primitives
@@ -215,11 +216,13 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 #define ioremap(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE)
 #define ioremap_nocache(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE)
 #define ioremap_cached(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE_WC)
 #define iounmap(cookie)			__iounmap(cookie)
 #else
 #define ioremap(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_nocache(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_cached(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE_WC)
 #define iounmap(cookie)			__arch_iounmap(cookie)
 #endif
 
diff --git a/include/asm-arm/ioctl.h b/arch/arm/include/asm/ioctl.h
index b279fe06dfe..b279fe06dfe 100644
--- a/include/asm-arm/ioctl.h
+++ b/arch/arm/include/asm/ioctl.h
diff --git a/include/asm-arm/ioctls.h b/arch/arm/include/asm/ioctls.h
index a91d8a1523c..a91d8a1523c 100644
--- a/include/asm-arm/ioctls.h
+++ b/arch/arm/include/asm/ioctls.h
diff --git a/include/asm-arm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h
index 97683975f7d..97683975f7d 100644
--- a/include/asm-arm/ipcbuf.h
+++ b/arch/arm/include/asm/ipcbuf.h
diff --git a/include/asm-arm/irq.h b/arch/arm/include/asm/irq.h
index 9cb01907e43..d6786090d02 100644
--- a/include/asm-arm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARM_IRQ_H
 #define __ASM_ARM_IRQ_H
 
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #ifndef irq_canonicalize
 #define irq_canonicalize(i)	(i)
diff --git a/include/asm-arm/irq_regs.h b/arch/arm/include/asm/irq_regs.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-arm/irq_regs.h
+++ b/arch/arm/include/asm/irq_regs.h
diff --git a/include/asm-arm/irqflags.h b/arch/arm/include/asm/irqflags.h
index 6d09974e664..6d09974e664 100644
--- a/include/asm-arm/irqflags.h
+++ b/arch/arm/include/asm/irqflags.h
diff --git a/include/asm-arm/kdebug.h b/arch/arm/include/asm/kdebug.h
index 6ece1b03766..6ece1b03766 100644
--- a/include/asm-arm/kdebug.h
+++ b/arch/arm/include/asm/kdebug.h
diff --git a/include/asm-arm/kexec.h b/arch/arm/include/asm/kexec.h
index c8986bb99ed..df15a0dc228 100644
--- a/include/asm-arm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -10,7 +10,7 @@
 /* Maximum address we can use for the control code buffer */
 #define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
 
-#define KEXEC_CONTROL_CODE_SIZE	4096
+#define KEXEC_CONTROL_PAGE_SIZE	4096
 
 #define KEXEC_ARCH KEXEC_ARCH_ARM
 
diff --git a/include/asm-arm/kgdb.h b/arch/arm/include/asm/kgdb.h
index 67af4b84198..67af4b84198 100644
--- a/include/asm-arm/kgdb.h
+++ b/arch/arm/include/asm/kgdb.h
diff --git a/include/asm-arm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
index 45def13ee17..45def13ee17 100644
--- a/include/asm-arm/kmap_types.h
+++ b/arch/arm/include/asm/kmap_types.h
diff --git a/include/asm-arm/kprobes.h b/arch/arm/include/asm/kprobes.h
index b1a37876942..a5d0d99ad38 100644
--- a/include/asm-arm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/kprobes.h
+ * arch/arm/include/asm/kprobes.h
  *
  * Copyright (C) 2006, 2007 Motorola Inc.
  *
diff --git a/include/asm-arm/leds.h b/arch/arm/include/asm/leds.h
index 12290ea5580..c545739f39b 100644
--- a/include/asm-arm/leds.h
+++ b/arch/arm/include/asm/leds.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/leds.h
+ *  arch/arm/include/asm/leds.h
  *
  *  Copyright (C) 1998 Russell King
  *
diff --git a/include/asm-arm/limits.h b/arch/arm/include/asm/limits.h
index 08d8c660080..08d8c660080 100644
--- a/include/asm-arm/limits.h
+++ b/arch/arm/include/asm/limits.h
diff --git a/include/asm-arm/linkage.h b/arch/arm/include/asm/linkage.h
index 5a25632b1bc..5a25632b1bc 100644
--- a/include/asm-arm/linkage.h
+++ b/arch/arm/include/asm/linkage.h
diff --git a/include/asm-arm/local.h b/arch/arm/include/asm/local.h
index c11c530f74d..c11c530f74d 100644
--- a/include/asm-arm/local.h
+++ b/arch/arm/include/asm/local.h
diff --git a/include/asm-arm/locks.h b/arch/arm/include/asm/locks.h
index 852220eecdb..ef4c897772d 100644
--- a/include/asm-arm/locks.h
+++ b/arch/arm/include/asm/locks.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/locks.h
+ *  arch/arm/include/asm/locks.h
  *
  *  Copyright (C) 2000 Russell King
  *
diff --git a/include/asm-arm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index bcc8aed7c9a..c59842dc7cb 100644
--- a/include/asm-arm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/arch.h
+ *  arch/arm/include/asm/mach/arch.h
  *
  *  Copyright (C) 2000 Russell King
  *
diff --git a/include/asm-arm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index e7c4a20aad5..fc7278ea714 100644
--- a/include/asm-arm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/dma.h
+ *  arch/arm/include/asm/mach/dma.h
  *
  *  Copyright (C) 1998-2000 Russell King
  *
diff --git a/include/asm-arm/mach/flash.h b/arch/arm/include/asm/mach/flash.h
index 05b029ef637..4ca69fe2c85 100644
--- a/include/asm-arm/mach/flash.h
+++ b/arch/arm/include/asm/mach/flash.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/flash.h
+ *  arch/arm/include/asm/mach/flash.h
  *
  *  Copyright (C) 2003 Russell King, All Rights Reserved.
  *
diff --git a/include/asm-arm/mach/irda.h b/arch/arm/include/asm/mach/irda.h
index 58984d9c0b0..38f77b5e56c 100644
--- a/include/asm-arm/mach/irda.h
+++ b/arch/arm/include/asm/mach/irda.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/irda.h
+ *  arch/arm/include/asm/mach/irda.h
  *
  *  Copyright (C) 2004 Russell King.
  *
diff --git a/include/asm-arm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index eb0bfba6570..acac5302e4e 100644
--- a/include/asm-arm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/irq.h
+ *  arch/arm/include/asm/mach/irq.h
  *
  *  Copyright (C) 1995-2000 Russell King.
  *
@@ -22,20 +22,6 @@ extern void init_FIQ(void);
 extern int show_fiq_list(struct seq_file *, void *);
 
 /*
- * Obsolete inline function for calling irq descriptor handlers.
- */
-static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc)
-{
-	desc->handle_irq(irq, desc);
-}
-
-void set_irq_flags(unsigned int irq, unsigned int flags);
-
-#define IRQF_VALID	(1 << 0)
-#define IRQF_PROBE	(1 << 1)
-#define IRQF_NOAUTOEN	(1 << 2)
-
-/*
  * This is for easy migration, but should be changed in the source
  */
 #define do_bad_IRQ(irq,desc)				\
@@ -45,10 +31,4 @@ do {							\
 	spin_unlock(&desc->lock);			\
 } while(0)
 
-extern unsigned long irq_err_count;
-static inline void ack_bad_irq(int irq)
-{
-	irq_err_count++;
-}
-
 #endif
diff --git a/include/asm-arm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 7ef3c839018..9eb936e49cc 100644
--- a/include/asm-arm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/map.h
+ *  arch/arm/include/asm/map.h
  *
  *  Copyright (C) 1999-2000 Russell King
  *
@@ -18,13 +18,13 @@ struct map_desc {
 	unsigned int type;
 };
 
-/* types 0-3 are defined in asm/io.h */
-#define MT_CACHECLEAN		4
-#define MT_MINICLEAN		5
-#define MT_LOW_VECTORS		6
-#define MT_HIGH_VECTORS		7
-#define MT_MEMORY		8
-#define MT_ROM			9
+/* types 0-4 are defined in asm/io.h */
+#define MT_CACHECLEAN		5
+#define MT_MINICLEAN		6
+#define MT_LOW_VECTORS		7
+#define MT_HIGH_VECTORS		8
+#define MT_MEMORY		9
+#define MT_ROM			10
 
 #define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
 #define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000
diff --git a/include/asm-arm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
index eb91145c00c..4da332b0314 100644
--- a/include/asm-arm/mach/mmc.h
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/mmc.h
+ *  arch/arm/include/asm/mach/mmc.h
  */
 #ifndef ASMARM_MACH_MMC_H
 #define ASMARM_MACH_MMC_H
diff --git a/include/asm-arm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 9d4f6b5ea41..32da1ae17e0 100644
--- a/include/asm-arm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/pci.h
+ *  arch/arm/include/asm/mach/pci.h
  *
  *  Copyright (C) 2000 Russell King
  *
diff --git a/include/asm-avr32/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h
index 55b317a8906..ea6d063923b 100644
--- a/include/asm-avr32/mach/serial_at91.h
+++ b/arch/arm/include/asm/mach/serial_at91.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mach/serial_at91.h
+ *  arch/arm/include/asm/mach/serial_at91.h
  *
  *  Based on serial_sa1100.h  by Nicolas Pitre
  *
diff --git a/include/asm-arm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h
index 20c22bb218d..d09064bf95a 100644
--- a/include/asm-arm/mach/serial_sa1100.h
+++ b/arch/arm/include/asm/mach/serial_sa1100.h
@@ -1,9 +1,9 @@
 /*
- *  linux/include/asm-arm/mach/serial_sa1100.h
+ *  arch/arm/include/asm/mach/serial_sa1100.h
  *
  *  Author: Nicolas Pitre
  *
- * Moved to include/asm-arm/mach and changed lots, Russell King
+ * Moved and changed lots, Russell King
  *
  * Low level machine dependent UART functions.
  */
diff --git a/include/asm-arm/mach/sharpsl_param.h b/arch/arm/include/asm/mach/sharpsl_param.h
index 7a24ecf0422..7a24ecf0422 100644
--- a/include/asm-arm/mach/sharpsl_param.h
+++ b/arch/arm/include/asm/mach/sharpsl_param.h
diff --git a/include/asm-arm/mach/time.h b/arch/arm/include/asm/mach/time.h
index 2fd36ea0130..b2cc1fcd040 100644
--- a/include/asm-arm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/mach/time.h
+ * arch/arm/include/asm/mach/time.h
  *
  * Copyright (C) 2004 MontaVista Software, Inc.
  *
diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 9e5ed7c0f27..270902c353f 100644
--- a/include/asm-arm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/mach/udc_pxa2xx.h
+ * arch/arm/include/asm/mach/udc_pxa2xx.h
  *
  * This supports machine-specific differences in how the PXA2xx
  * USB Device Controller (UDC) is wired.
diff --git a/include/asm-arm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h
index 7b81e0c4254..e1ca48a9e97 100644
--- a/include/asm-arm/mc146818rtc.h
+++ b/arch/arm/include/asm/mc146818rtc.h
@@ -4,7 +4,7 @@
 #ifndef _ASM_MC146818RTC_H
 #define _ASM_MC146818RTC_H
 
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #ifndef RTC_PORT
diff --git a/include/asm-arm/memory.h b/arch/arm/include/asm/memory.h
index 9ba4d7136e6..bf7c737c922 100644
--- a/include/asm-arm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/memory.h
+ *  arch/arm/include/asm/memory.h
  *
  *  Copyright (C) 2000-2002 Russell King
  *  modification for nommu, Hyok S. Choi, 2004
@@ -24,7 +24,7 @@
 #endif
 
 #include <linux/compiler.h>
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 #include <asm/sizes.h>
 
 #ifdef CONFIG_MMU
@@ -150,6 +150,14 @@
 #endif
 
 /*
+ * Amount of memory reserved for the vmalloc() area, and minimum
+ * address for vmalloc mappings.
+ */
+extern unsigned long vmalloc_reserve;
+
+#define VMALLOC_MIN		(void *)(VMALLOC_END - vmalloc_reserve)
+
+/*
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.
  *
@@ -306,20 +314,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
 
 /*
- * Optional device DMA address remapping. Do _not_ use directly!
- * We should really eliminate virt_to_bus() here - it's deprecated.
- */
-#ifndef __arch_page_to_dma
-#define page_to_dma(dev, page)		((dma_addr_t)__virt_to_bus((unsigned long)page_address(page)))
-#define dma_to_virt(dev, addr)		((void *)__bus_to_virt(addr))
-#define virt_to_dma(dev, addr)		((dma_addr_t)__virt_to_bus((unsigned long)(addr)))
-#else
-#define page_to_dma(dev, page)		(__arch_page_to_dma(dev, page))
-#define dma_to_virt(dev, addr)		(__arch_dma_to_virt(dev, addr))
-#define virt_to_dma(dev, addr)		(__arch_virt_to_dma(dev, addr))
-#endif
-
-/*
  * Optional coherency support.  Currently used only by selected
  * Intel XSC3-based systems.
  */
diff --git a/include/asm-arm/mman.h b/arch/arm/include/asm/mman.h
index 54570d2e95b..54570d2e95b 100644
--- a/include/asm-arm/mman.h
+++ b/arch/arm/include/asm/mman.h
diff --git a/include/asm-arm/mmu.h b/arch/arm/include/asm/mmu.h
index 53099d4ee42..53099d4ee42 100644
--- a/include/asm-arm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
diff --git a/include/asm-arm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 91b9dfdfed5..a301e446007 100644
--- a/include/asm-arm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mmu_context.h
+ *  arch/arm/include/asm/mmu_context.h
  *
  *  Copyright (C) 1996 Russell King.
  *
diff --git a/include/asm-arm/mmzone.h b/arch/arm/include/asm/mmzone.h
index b87de151f0a..ae63a4fd28c 100644
--- a/include/asm-arm/mmzone.h
+++ b/arch/arm/include/asm/mmzone.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/mmzone.h
+ *  arch/arm/include/asm/mmzone.h
  *
  *  1999-12-29	Nicolas Pitre		Created
  *
@@ -25,6 +25,6 @@ extern pg_data_t discontig_node_data[];
  */
 #define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
 
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 
 #endif
diff --git a/include/asm-arm/module.h b/arch/arm/include/asm/module.h
index 24b168dc31a..24b168dc31a 100644
--- a/include/asm-arm/module.h
+++ b/arch/arm/include/asm/module.h
diff --git a/include/asm-arm/msgbuf.h b/arch/arm/include/asm/msgbuf.h
index 33b35b946ea..33b35b946ea 100644
--- a/include/asm-arm/msgbuf.h
+++ b/arch/arm/include/asm/msgbuf.h
diff --git a/include/asm-arm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h
index 9eb127cc7db..d8fbe2d9b8b 100644
--- a/include/asm-arm/mtd-xip.h
+++ b/arch/arm/include/asm/mtd-xip.h
@@ -10,15 +10,13 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
  */
 
 #ifndef __ARM_MTD_XIP_H__
 #define __ARM_MTD_XIP_H__
 
-#include <asm/hardware.h>
-#include <asm/arch/mtd-xip.h>
+#include <mach/hardware.h>
+#include <mach/mtd-xip.h>
 
 /* fill instruction prefetch */
 #define xip_iprefetch() 	do { asm volatile (".rep 8; nop; .endr"); } while (0)
diff --git a/include/asm-arm/mutex.h b/arch/arm/include/asm/mutex.h
index 020bd98710a..93226cf23ae 100644
--- a/include/asm-arm/mutex.h
+++ b/arch/arm/include/asm/mutex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/mutex.h
+ * arch/arm/include/asm/mutex.h
  *
  * ARM optimized mutex locking primitives
  *
diff --git a/include/asm-arm/nwflash.h b/arch/arm/include/asm/nwflash.h
index 04e5a557a88..04e5a557a88 100644
--- a/include/asm-arm/nwflash.h
+++ b/arch/arm/include/asm/nwflash.h
diff --git a/include/asm-arm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index ea1cde84f50..3574c0deb37 100644
--- a/include/asm-arm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/page-nommu.h
+ *  arch/arm/include/asm/page-nommu.h
  *
  *  Copyright (C) 2004 Hyok S. Choi
  *
diff --git a/include/asm-arm/page.h b/arch/arm/include/asm/page.h
index 7c5fc5582e5..cf2e2680daa 100644
--- a/include/asm-arm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/page.h
+ *  arch/arm/include/asm/page.h
  *
  *  Copyright (C) 1995-2003 Russell King
  *
diff --git a/include/asm-arm/param.h b/arch/arm/include/asm/param.h
index 15806468ba7..8b24bf94c06 100644
--- a/include/asm-arm/param.h
+++ b/arch/arm/include/asm/param.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/param.h
+ *  arch/arm/include/asm/param.h
  *
  *  Copyright (C) 1995-1999 Russell King
  *
diff --git a/include/asm-arm/parport.h b/arch/arm/include/asm/parport.h
index f2f90c76ddd..26e94b09035 100644
--- a/include/asm-arm/parport.h
+++ b/arch/arm/include/asm/parport.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/parport.h: ARM-specific parport initialisation
+ *  arch/arm/include/asm/parport.h: ARM-specific parport initialisation
  *
  *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
  *
diff --git a/include/asm-arm/pci.h b/arch/arm/include/asm/pci.h
index 2d84792f2e1..918d0cbbf06 100644
--- a/include/asm-arm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -4,7 +4,7 @@
 #ifdef __KERNEL__
 #include <asm-generic/pci-dma-compat.h>
 
-#include <asm/hardware.h> /* for PCIBIOS_MIN_* */
+#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
 #define pcibios_scan_all_fns(a, b)	0
 
@@ -30,7 +30,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  * The networking and block device layers use this boolean for bounce
  * buffer decisions.
  */
-#define PCI_DMA_BUS_IS_PHYS     (0)
+#define PCI_DMA_BUS_IS_PHYS     (1)
 
 /*
  * Whether pci_unmap_{single,page} is a nop depends upon the
diff --git a/include/asm-arm/percpu.h b/arch/arm/include/asm/percpu.h
index b4e32d8ec07..b4e32d8ec07 100644
--- a/include/asm-arm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
diff --git a/include/asm-arm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 163b0305dd7..3dcd64bf182 100644
--- a/include/asm-arm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/pgalloc.h
+ *  arch/arm/include/asm/pgalloc.h
  *
  *  Copyright (C) 2000-2001 Russell King
  *
diff --git a/include/asm-arm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h
index f3b5120c99f..fd1521d5cb9 100644
--- a/include/asm-arm/pgtable-hwdef.h
+++ b/arch/arm/include/asm/pgtable-hwdef.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/pgtable-hwdef.h
+ *  arch/arm/include/asm/pgtable-hwdef.h
  *
  *  Copyright (C) 1995-2002 Russell King
  *
diff --git a/include/asm-arm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index 386fcc10a97..b011f2e939a 100644
--- a/include/asm-arm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/pgtable-nommu.h
+ *  arch/arm/include/asm/pgtable-nommu.h
  *
  *  Copyright (C) 1995-2002 Russell King
  *  Copyright (C) 2004  Hyok S. Choi
diff --git a/include/asm-arm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 5571c13c3f3..8e21ef15bd7 100644
--- a/include/asm-arm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/pgtable.h
+ *  arch/arm/include/asm/pgtable.h
  *
  *  Copyright (C) 1995-2002 Russell King
  *
@@ -20,7 +20,7 @@
 #else
 
 #include <asm/memory.h>
-#include <asm/arch/vmalloc.h>
+#include <mach/vmalloc.h>
 #include <asm/pgtable-hwdef.h>
 
 /*
diff --git a/include/asm-arm/poll.h b/arch/arm/include/asm/poll.h
index c98509d3149..c98509d3149 100644
--- a/include/asm-arm/poll.h
+++ b/arch/arm/include/asm/poll.h
diff --git a/include/asm-arm/posix_types.h b/arch/arm/include/asm/posix_types.h
index c37379dadcb..2446d23bfdb 100644
--- a/include/asm-arm/posix_types.h
+++ b/arch/arm/include/asm/posix_types.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/posix_types.h
+ *  arch/arm/include/asm/posix_types.h
  *
  *  Copyright (C) 1996-1998 Russell King.
  *
diff --git a/include/asm-arm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 75ec760f4c7..db80203b68e 100644
--- a/include/asm-arm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/proc-fns.h
+ *  arch/arm/include/asm/proc-fns.h
  *
  *  Copyright (C) 1997-1999 Russell King
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
diff --git a/include/asm-arm/processor.h b/arch/arm/include/asm/processor.h
index bd8029e8dc6..517a4d6ffc7 100644
--- a/include/asm-arm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/processor.h
+ *  arch/arm/include/asm/processor.h
  *
  *  Copyright (C) 1995-1999 Russell King
  *
@@ -112,9 +112,9 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
 static inline void prefetch(const void *ptr)
 {
 	__asm__ __volatile__(
-		"pld\t%0"
+		"pld\t%a0"
 		:
-		: "o" (*(char *)ptr)
+		: "p" (ptr)
 		: "cc");
 }
 
diff --git a/include/asm-arm/procinfo.h b/arch/arm/include/asm/procinfo.h
index 4d3c685075e..ca52e584ef7 100644
--- a/include/asm-arm/procinfo.h
+++ b/arch/arm/include/asm/procinfo.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/procinfo.h
+ *  arch/arm/include/asm/procinfo.h
  *
  *  Copyright (C) 1996-1999 Russell King
  *
diff --git a/include/asm-arm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 8382b7510f9..b415c0e8545 100644
--- a/include/asm-arm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/ptrace.h
+ *  arch/arm/include/asm/ptrace.h
  *
  *  Copyright (C) 1996-2003 Russell King
  *
diff --git a/include/asm-arm/resource.h b/arch/arm/include/asm/resource.h
index 734b581b5b6..734b581b5b6 100644
--- a/include/asm-arm/resource.h
+++ b/arch/arm/include/asm/resource.h
diff --git a/include/asm-arm/scatterlist.h b/arch/arm/include/asm/scatterlist.h
index ca0a37d0340..ca0a37d0340 100644
--- a/include/asm-arm/scatterlist.h
+++ b/arch/arm/include/asm/scatterlist.h
diff --git a/include/asm-arm/sections.h b/arch/arm/include/asm/sections.h
index 2b8c5160388..2b8c5160388 100644
--- a/include/asm-arm/sections.h
+++ b/arch/arm/include/asm/sections.h
diff --git a/include/asm-arm/segment.h b/arch/arm/include/asm/segment.h
index 9e24c21f630..9e24c21f630 100644
--- a/include/asm-arm/segment.h
+++ b/arch/arm/include/asm/segment.h
diff --git a/include/asm-arm/sembuf.h b/arch/arm/include/asm/sembuf.h
index 1c028395428..1c028395428 100644
--- a/include/asm-arm/sembuf.h
+++ b/arch/arm/include/asm/sembuf.h
diff --git a/include/asm-arm/serial.h b/arch/arm/include/asm/serial.h
index 015b262dc14..ebb049091e2 100644
--- a/include/asm-arm/serial.h
+++ b/arch/arm/include/asm/serial.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/serial.h
+ *  arch/arm/include/asm/serial.h
  *
  *  Copyright (C) 1996 Russell King.
  *
diff --git a/include/asm-arm/setup.h b/arch/arm/include/asm/setup.h
index 7bbf105463f..7bbf105463f 100644
--- a/include/asm-arm/setup.h
+++ b/arch/arm/include/asm/setup.h
diff --git a/include/asm-arm/shmbuf.h b/arch/arm/include/asm/shmbuf.h
index 2e5c67ba1c9..2e5c67ba1c9 100644
--- a/include/asm-arm/shmbuf.h
+++ b/arch/arm/include/asm/shmbuf.h
diff --git a/include/asm-arm/shmparam.h b/arch/arm/include/asm/shmparam.h
index a5223b3a9bf..a5223b3a9bf 100644
--- a/include/asm-arm/shmparam.h
+++ b/arch/arm/include/asm/shmparam.h
diff --git a/include/asm-arm/sigcontext.h b/arch/arm/include/asm/sigcontext.h
index fc0b80b6a6f..fc0b80b6a6f 100644
--- a/include/asm-arm/sigcontext.h
+++ b/arch/arm/include/asm/sigcontext.h
diff --git a/include/asm-arm/siginfo.h b/arch/arm/include/asm/siginfo.h
index 5e21852e603..5e21852e603 100644
--- a/include/asm-arm/siginfo.h
+++ b/arch/arm/include/asm/siginfo.h
diff --git a/include/asm-arm/signal.h b/arch/arm/include/asm/signal.h
index d0fb487aba4..d0fb487aba4 100644
--- a/include/asm-arm/signal.h
+++ b/arch/arm/include/asm/signal.h
diff --git a/include/asm-arm/sizes.h b/arch/arm/include/asm/sizes.h
index 503843db156..503843db156 100644
--- a/include/asm-arm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
diff --git a/include/asm-arm/smp.h b/arch/arm/include/asm/smp.h
index 7fffa2404b8..727b5c042e5 100644
--- a/include/asm-arm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/smp.h
+ *  arch/arm/include/asm/smp.h
  *
  *  Copyright (C) 2004-2005 ARM Ltd.
  *
@@ -14,10 +14,10 @@
 #include <linux/cpumask.h>
 #include <linux/thread_info.h>
 
-#include <asm/arch/smp.h>
+#include <mach/smp.h>
 
 #ifndef CONFIG_SMP
-# error "<asm-arm/smp.h> included in non-SMP build"
+# error "<asm/smp.h> included in non-SMP build"
 #endif
 
 #define raw_smp_processor_id() (current_thread_info()->cpu)
diff --git a/include/asm-arm/socket.h b/arch/arm/include/asm/socket.h
index 6817be9573a..6817be9573a 100644
--- a/include/asm-arm/socket.h
+++ b/arch/arm/include/asm/socket.h
diff --git a/include/asm-arm/sockios.h b/arch/arm/include/asm/sockios.h
index a2588a2512d..a2588a2512d 100644
--- a/include/asm-arm/sockios.h
+++ b/arch/arm/include/asm/sockios.h
diff --git a/include/asm-arm/sparsemem.h b/arch/arm/include/asm/sparsemem.h
index 277158191a0..277158191a0 100644
--- a/include/asm-arm/sparsemem.h
+++ b/arch/arm/include/asm/sparsemem.h
diff --git a/include/asm-arm/spinlock.h b/arch/arm/include/asm/spinlock.h
index 2b41ebbfa7f..2b41ebbfa7f 100644
--- a/include/asm-arm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
diff --git a/include/asm-arm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h
index 43e83f6d2ee..43e83f6d2ee 100644
--- a/include/asm-arm/spinlock_types.h
+++ b/arch/arm/include/asm/spinlock_types.h
diff --git a/include/asm-arm/stat.h b/arch/arm/include/asm/stat.h
index 42c0c13999d..42c0c13999d 100644
--- a/include/asm-arm/stat.h
+++ b/arch/arm/include/asm/stat.h
diff --git a/include/asm-arm/statfs.h b/arch/arm/include/asm/statfs.h
index a02e6a8c3d7..a02e6a8c3d7 100644
--- a/include/asm-arm/statfs.h
+++ b/arch/arm/include/asm/statfs.h
diff --git a/include/asm-arm/string.h b/arch/arm/include/asm/string.h
index e50c4a39b69..e50c4a39b69 100644
--- a/include/asm-arm/string.h
+++ b/arch/arm/include/asm/string.h
diff --git a/include/asm-arm/suspend.h b/arch/arm/include/asm/suspend.h
index cf0d0bdee74..cf0d0bdee74 100644
--- a/include/asm-arm/suspend.h
+++ b/arch/arm/include/asm/suspend.h
diff --git a/include/asm-arm/system.h b/arch/arm/include/asm/system.h
index 514af792a59..514af792a59 100644
--- a/include/asm-arm/system.h
+++ b/arch/arm/include/asm/system.h
diff --git a/include/asm-arm/termbits.h b/arch/arm/include/asm/termbits.h
index f784d11f40b..f784d11f40b 100644
--- a/include/asm-arm/termbits.h
+++ b/arch/arm/include/asm/termbits.h
diff --git a/include/asm-arm/termios.h b/arch/arm/include/asm/termios.h
index 293e3f1bc3f..293e3f1bc3f 100644
--- a/include/asm-arm/termios.h
+++ b/arch/arm/include/asm/termios.h
diff --git a/include/asm-arm/therm.h b/arch/arm/include/asm/therm.h
index e51c923ecdf..f002f0197d7 100644
--- a/include/asm-arm/therm.h
+++ b/arch/arm/include/asm/therm.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/therm.h: Definitions for Dallas Semiconductor
+ * arch/arm/include/asm/therm.h: Definitions for Dallas Semiconductor
  *  DS1620 thermometer driver (as used in the Rebel.com NetWinder)
  */
 #ifndef __ASM_THERM_H
diff --git a/include/asm-arm/thread_info.h b/arch/arm/include/asm/thread_info.h
index d4be2d64616..e56fa48e4ae 100644
--- a/include/asm-arm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/thread_info.h
+ *  arch/arm/include/asm/thread_info.h
  *
  *  Copyright (C) 2002 Russell King.
  *
@@ -117,7 +117,7 @@ extern void iwmmxt_task_switch(struct thread_info *);
 
 /*
  * We use bit 30 of the preempt_count to indicate that kernel
- * preemption is occurring.  See include/asm-arm/hardirq.h.
+ * preemption is occurring.  See <asm/hardirq.h>.
  */
 #define PREEMPT_ACTIVE	0x40000000
 
diff --git a/include/asm-arm/thread_notify.h b/arch/arm/include/asm/thread_notify.h
index 8866e521684..f27379d7f72 100644
--- a/include/asm-arm/thread_notify.h
+++ b/arch/arm/include/asm/thread_notify.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/thread_notify.h
+ *  arch/arm/include/asm/thread_notify.h
  *
  *  Copyright (C) 2006 Russell King.
  *
diff --git a/include/asm-arm/timex.h b/arch/arm/include/asm/timex.h
index 7b8d4cb24be..3be8de3adab 100644
--- a/include/asm-arm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/timex.h
+ *  arch/arm/include/asm/timex.h
  *
  *  Copyright (C) 1997,1998 Russell King
  *
@@ -12,7 +12,7 @@
 #ifndef _ASMARM_TIMEX_H
 #define _ASMARM_TIMEX_H
 
-#include <asm/arch/timex.h>
+#include <mach/timex.h>
 
 typedef unsigned long cycles_t;
 
diff --git a/include/asm-arm/tlb.h b/arch/arm/include/asm/tlb.h
index 36bd402a21c..857f1dfac79 100644
--- a/include/asm-arm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/tlb.h
+ *  arch/arm/include/asm/tlb.h
  *
  *  Copyright (C) 2002 Russell King
  *
diff --git a/include/asm-arm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 909656c747e..b543a054a17 100644
--- a/include/asm-arm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/tlbflush.h
+ *  arch/arm/include/asm/tlbflush.h
  *
  *  Copyright (C) 1999-2003 Russell King
  *
@@ -54,6 +54,7 @@
  *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
  *	  fr    - Feroceon (v4wbi with non-outer-cacheable page table walks)
  *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
+ *	  v7wbi - identical to v6wbi
  */
 #undef _TLB
 #undef MULTI_TLB
@@ -266,14 +267,16 @@ extern struct cpu_tlb_fns cpu_tlb;
 				 v4wbi_possible_flags | \
 				 fr_possible_flags | \
 				 v4wb_possible_flags | \
-				 v6wbi_possible_flags)
+				 v6wbi_possible_flags | \
+				 v7wbi_possible_flags)
 
 #define always_tlb_flags	(v3_always_flags & \
 				 v4_always_flags & \
 				 v4wbi_always_flags & \
 				 fr_always_flags & \
 				 v4wb_always_flags & \
-				 v6wbi_always_flags)
+				 v6wbi_always_flags & \
+				 v7wbi_always_flags)
 
 #define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
 
diff --git a/include/asm-arm/topology.h b/arch/arm/include/asm/topology.h
index accbd7cad9b..accbd7cad9b 100644
--- a/include/asm-arm/topology.h
+++ b/arch/arm/include/asm/topology.h
diff --git a/include/asm-arm/traps.h b/arch/arm/include/asm/traps.h
index aa399aec568..aa399aec568 100644
--- a/include/asm-arm/traps.h
+++ b/arch/arm/include/asm/traps.h
diff --git a/include/asm-arm/types.h b/arch/arm/include/asm/types.h
index 345df01534a..345df01534a 100644
--- a/include/asm-arm/types.h
+++ b/arch/arm/include/asm/types.h
diff --git a/include/asm-arm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 4c1a3fa9f25..d0f51ff900b 100644
--- a/include/asm-arm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/uaccess.h
+ *  arch/arm/include/asm/uaccess.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-arm/ucontext.h b/arch/arm/include/asm/ucontext.h
index bf65e9f4525..bf65e9f4525 100644
--- a/include/asm-arm/ucontext.h
+++ b/arch/arm/include/asm/ucontext.h
diff --git a/include/asm-arm/unaligned.h b/arch/arm/include/asm/unaligned.h
index 44593a89490..44593a89490 100644
--- a/include/asm-arm/unaligned.h
+++ b/arch/arm/include/asm/unaligned.h
diff --git a/include/asm-arm/unistd.h b/arch/arm/include/asm/unistd.h
index 7c570082b1e..010618487cf 100644
--- a/include/asm-arm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/unistd.h
+ *  arch/arm/include/asm/unistd.h
  *
  *  Copyright (C) 2001-2005 Russell King
  *
@@ -381,6 +381,12 @@
 #define __NR_fallocate			(__NR_SYSCALL_BASE+352)
 #define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
 #define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
+#define __NR_signalfd4			(__NR_SYSCALL_BASE+355)
+#define __NR_eventfd2			(__NR_SYSCALL_BASE+356)
+#define __NR_epoll_create1		(__NR_SYSCALL_BASE+357)
+#define __NR_dup3			(__NR_SYSCALL_BASE+358)
+#define __NR_pipe2			(__NR_SYSCALL_BASE+359)
+#define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
 
 /*
  * The following SWIs are ARM private.
diff --git a/include/asm-arm/user.h b/arch/arm/include/asm/user.h
index 825c1e7c582..825c1e7c582 100644
--- a/include/asm-arm/user.h
+++ b/arch/arm/include/asm/user.h
diff --git a/include/asm-arm/vfp.h b/arch/arm/include/asm/vfp.h
index 5f9a2cb3d45..f4ab34fd4f7 100644
--- a/include/asm-arm/vfp.h
+++ b/arch/arm/include/asm/vfp.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/vfp.h
+ * arch/arm/include/asm/vfp.h
  *
  * VFP register definitions.
  * First, the standard VFP set.
diff --git a/include/asm-arm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index cccb3892e73..422f3cc204a 100644
--- a/include/asm-arm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/vfpmacros.h
+ * arch/arm/include/asm/vfpmacros.h
  *
  * Assembler-only file containing VFP macros and register definitions.
  */
diff --git a/include/asm-arm/vga.h b/arch/arm/include/asm/vga.h
index 1e0b913c3d7..6a3cd2a2f67 100644
--- a/include/asm-arm/vga.h
+++ b/arch/arm/include/asm/vga.h
@@ -1,7 +1,7 @@
 #ifndef ASMARM_VGA_H
 #define ASMARM_VGA_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #define VGA_MAP_MEM(x,s)	(PCIMEM_BASE + (x))
diff --git a/include/asm-arm/xor.h b/arch/arm/include/asm/xor.h
index e7c4cf58bed..7604673dc42 100644
--- a/include/asm-arm/xor.h
+++ b/arch/arm/include/asm/xor.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/xor.h
+ *  arch/arm/include/asm/xor.h
  *
  *  Copyright (C) 2001 Russell King
  *
diff --git a/arch/arm/kernel/.gitignore b/arch/arm/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/arm/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 30a67a5a40a..09a061cb783 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -262,10 +262,10 @@
 /* 250 */	CALL(sys_epoll_create)
 		CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl))
 		CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait))
-	 	CALL(sys_remap_file_pages)
+		CALL(sys_remap_file_pages)
 		CALL(sys_ni_syscall)	/* sys_set_thread_area */
 /* 255 */	CALL(sys_ni_syscall)	/* sys_get_thread_area */
- 		CALL(sys_set_tid_address)
+		CALL(sys_set_tid_address)
 		CALL(sys_timer_create)
 		CALL(sys_timer_settime)
 		CALL(sys_timer_gettime)
@@ -364,6 +364,12 @@
 		CALL(sys_fallocate)
 		CALL(sys_timerfd_settime)
 		CALL(sys_timerfd_gettime)
+/* 355 */	CALL(sys_signalfd4)
+		CALL(sys_eventfd2)
+		CALL(sys_epoll_create1)
+		CALL(sys_dup3)
+		CALL(sys_pipe2)
+/* 360 */	CALL(sys_inotify_init1)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/kernel/crunch-bits.S
index a26886758c6..0ec9bb48fab 100644
--- a/arch/arm/kernel/crunch-bits.S
+++ b/arch/arm/kernel/crunch-bits.S
@@ -16,7 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 
 /*
  * We can't use hex constants here due to a bug in gas.
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 627d79414c9..3b6a1c293ee 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -15,7 +15,7 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/thread_notify.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 5617566477b..9550ff0ddde 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -80,7 +80,7 @@
 #endif	/* CONFIG_CPU_V6 */
 
 #else
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 #endif	/* CONFIG_DEBUG_ICEDCC */
 
 /*
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index f5cfdabcb87..7a50575a8d4 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -46,7 +46,7 @@
 
 #include <asm/dma.h>
 #include <asm/ecard.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7dca225752c..617e509d60d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -18,7 +18,7 @@
 #include <asm/memory.h>
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
 
 #include "entry-header.S"
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 84694e88b42..060d7e2e9f6 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -10,7 +10,7 @@
 
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 
 #include "entry-header.S"
 
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 7e9c00a8a41..1c3c6ea5f9e 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -181,7 +181,7 @@ ENTRY(lookup_processor_type)
 	ldmfd	sp!, {r4 - r7, r9, pc}
 
 /*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
+ * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
  * more information about the __proc_info and __arch_info structures.
  */
 	.long	__proc_info_begin
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 5d78ffb8a9a..27329bd3203 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 
 #include <asm/assembler.h>
-#include <asm/mach-types.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 11dcd52e51b..f88efb135b7 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -38,6 +38,7 @@
 #include <linux/proc_fs.h>
 
 #include <asm/system.h>
+#include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
 /*
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index db8f54a3451..fae5beb3c3d 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -71,7 +71,7 @@ void machine_kexec(struct kimage *image)
 
 
 	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	cpu_proc_fin();
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 89bfded70a1..3fd88233706 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -51,7 +51,7 @@ extern void setup_mm_for_reboot(char mode);
 
 static volatile int hlt_counter;
 
-#include <asm/arch/system.h>
+#include <mach/system.h>
 
 void disable_hlt(void)
 {
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 38f0e7940a1..2ca7038b67a 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -81,6 +81,8 @@ EXPORT_SYMBOL(system_serial_high);
 unsigned int elf_hwcap;
 EXPORT_SYMBOL(elf_hwcap);
 
+unsigned long __initdata vmalloc_reserve = 128 << 20;
+
 
 #ifdef MULTI_CPU
 struct processor processor;
@@ -501,6 +503,17 @@ static void __init early_mem(char **p)
 __early_param("mem=", early_mem);
 
 /*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the vmalloc
+ * area - the default is 128m.
+ */
+static void __init early_vmalloc(char **arg)
+{
+	vmalloc_reserve = memparse(*arg, arg);
+}
+__early_param("vmalloc=", early_vmalloc);
+
+/*
  * Initial parsing of the command line.
  */
 static void __init parse_cmdline(char **cmdline_p, char *from)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 5a7c09564d1..e9842f6767f 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -100,7 +100,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	 * a 1:1 mapping for the physical address of the kernel.
 	 */
 	pgd = pgd_alloc(&init_mm);
-	pmd = pmd_offset(pgd, PHYS_OFFSET);
+	pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
 	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
 		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
 
@@ -139,7 +139,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	secondary_data.stack = NULL;
 	secondary_data.pgdir = 0;
 
-	*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
+	*pmd = __pmd(0);
 	pgd_free(&init_mm, pgd);
 
 	if (ret) {
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 7277aef8309..872f1f8fbb5 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -288,14 +288,28 @@ void unregister_undef_hook(struct undef_hook *hook)
 	spin_unlock_irqrestore(&undef_lock, flags);
 }
 
+static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
+{
+	struct undef_hook *hook;
+	unsigned long flags;
+	int (*fn)(struct pt_regs *regs, unsigned int instr) = NULL;
+
+	spin_lock_irqsave(&undef_lock, flags);
+	list_for_each_entry(hook, &undef_hook, node)
+		if ((instr & hook->instr_mask) == hook->instr_val &&
+		    (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val)
+			fn = hook->fn;
+	spin_unlock_irqrestore(&undef_lock, flags);
+
+	return fn ? fn(regs, instr) : 1;
+}
+
 asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 {
 	unsigned int correction = thumb_mode(regs) ? 2 : 4;
 	unsigned int instr;
-	struct undef_hook *hook;
 	siginfo_t info;
 	void __user *pc;
-	unsigned long flags;
 
 	/*
 	 * According to the ARM ARM, PC is 2 or 4 bytes ahead,
@@ -325,17 +339,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	}
 #endif
 
-	spin_lock_irqsave(&undef_lock, flags);
-	list_for_each_entry(hook, &undef_hook, node) {
-		if ((instr & hook->instr_mask) == hook->instr_val &&
-		    (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) {
-			if (hook->fn(regs, instr) == 0) {
-				spin_unlock_irqrestore(&undef_lock, flags);
-				return;
-			}
-		}
-	}
-	spin_unlock_irqrestore(&undef_lock, flags);
+	if (call_undef_hook(regs, instr) == 0)
+		return;
 
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S
index c55aaa2a208..8678eb2b7a6 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/lib/ecard.S
@@ -12,7 +12,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define CPSR2SPSR(rt) \
 		mrs	rt, cpsr; \
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 1dd8ea4f9a9..2034d4dbe6a 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -20,7 +20,7 @@
  *		r2, r3 contains the zero-extended value
  *		lr corrupted
  *
- * No other registers must be altered.  (see include/asm-arm/uaccess.h
+ * No other registers must be altered.  (see <asm/uaccess.h>
  * for specific ASM register usage).
  *
  * Note that ADDR_LIMIT is either 0 or 0xc0000000.
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
index 4ef90418514..9aaf7c72065 100644
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 .Linsw_bad_alignment:
 		adr	r0, .Linsw_bad_align_msg
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
index 1607a29f49b..cd34503e424 100644
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 .Loutsw_bad_alignment:
 		adr	r0, .Loutsw_bad_align_msg
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 8620afe54f7..08ec7dffa52 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -20,7 +20,7 @@
  * Outputs:	r0 is the error code
  *		lr corrupted
  *
- * No other registers must be altered.  (see include/asm-arm/uaccess.h
+ * No other registers must be altered.  (see <asm/uaccess.h>
  * for specific ASM register usage).
  *
  * Note that ADDR_LIMIT is either 0 or 0xc0000000
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index ff6ece487ff..67c2bf4774b 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -29,7 +29,7 @@ ENTRY(sha_transform)
 	stmfd	sp!, {r4 - r8, lr}
 
 	@ for (i = 0; i < 16; i++)
-	@         W[i] = be32_to_cpu(in[i]); */
+	@         W[i] = be32_to_cpu(in[i]);
 
 #ifdef __ARMEB__
 	mov	r4, r0
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index 83f57da3184..81a3ecc0d10 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -20,14 +20,14 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/aaed2000.h>
+#include <mach/aaed2000.h>
 
 #include "core.h"
 
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index b016be2b0e3..dfb26bc23d1 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -20,7 +20,7 @@
 #include <linux/timex.h>
 #include <linux/signal.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
index a6d1ee0980f..bc729c42f84 100644
--- a/include/asm-arm/arch-aaec2000/aaec2000.h
+++ b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/aaec2000.h
+ *  arch/arm/mach-aaec2000/include/mach/aaec2000.h
  *
  *  AAEC-2000 registers definition
  *
diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
index bc76d2badb9..f821295ca71 100644
--- a/include/asm-arm/arch-aaec2000/aaed2000.h
+++ b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/aaed2000.h
+ *  arch/arm/mach-aaec2000/include/mach/aaed2000.h
  *
  *  AAED-2000 specific bits definition
  *
diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
index 7b1fce021d8..0b6351d7c38 100644
--- a/include/asm-arm/arch-aaec2000/debug-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/*  linux/include/asm-arm/arch-aaec2000/debug-macro.S
+/*  arch/arm/mach-aaec2000/include/mach/debug-macro.S
  *
  *  Debugging macro include header
  *
diff --git a/include/asm-arm/arch-aaec2000/dma.h b/arch/arm/mach-aaec2000/include/mach/dma.h
index e100b1e526f..2da846c72fe 100644
--- a/include/asm-arm/arch-aaec2000/dma.h
+++ b/arch/arm/mach-aaec2000/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/dma.h
+ *  arch/arm/mach-aaec2000/include/mach/dma.h
  *
  *  Copyright (c) 2005 Nicolas Bellido Y Ortega
  *
diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
index 83fdf68f6b7..c8fb3446900 100644
--- a/include/asm-arm/arch-aaec2000/entry-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/entry-macro.S
+ *  arch/arm/mach-aaec2000/include/mach/entry-macro.S
  *
  *  Low-level IRQ helper for aaec-2000 based platforms
  *
@@ -10,7 +10,7 @@
  *  published by the Free Software Foundation.
  *
  */
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h
index 153506fd06e..965a6f6672d 100644
--- a/include/asm-arm/arch-aaec2000/hardware.h
+++ b/arch/arm/mach-aaec2000/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/hardware.h
+ *  arch/arm/mach-aaec2000/include/mach/hardware.h
  *
  *  Copyright (c) 2005 Nicolas Bellido Y Ortega
  *
@@ -12,7 +12,7 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <asm/arch/aaec2000.h>
+#include <mach/aaec2000.h>
 
 /* The kernel is loaded at physical address 0xf8000000.
  * We map the IO space a bit after
diff --git a/include/asm-arm/arch-aaec2000/io.h b/arch/arm/mach-aaec2000/include/mach/io.h
index d710204ac74..c87c24de111 100644
--- a/include/asm-arm/arch-aaec2000/io.h
+++ b/arch/arm/mach-aaec2000/include/mach/io.h
@@ -1,12 +1,12 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/io.h
+ *  arch/arm/mach-aaec2000/include/mach/io.h
  *
  *  Copied from asm/arch/sa1100/io.h
  */
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h
index de252220e80..bf45c6d2f29 100644
--- a/include/asm-arm/arch-aaec2000/irqs.h
+++ b/arch/arm/mach-aaec2000/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/irqs.h
+ *  arch/arm/mach-aaec2000/include/mach/irqs.h
  *
  *  Copyright (c) 2005 Nicolas Bellido Y Ortega
  *
diff --git a/include/asm-arm/arch-aaec2000/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
index 9eceb414892..56ae900a482 100644
--- a/include/asm-arm/arch-aaec2000/memory.h
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/memory.h
+ *  arch/arm/mach-aaec2000/include/mach/memory.h
  *
  *  Copyright (c) 2005 Nicolas Bellido Y Ortega
  *
diff --git a/include/asm-arm/arch-aaec2000/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
index 08de97b407a..8f4115d734c 100644
--- a/include/asm-arm/arch-aaec2000/system.h
+++ b/arch/arm/mach-aaec2000/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaed2000/system.h
+ *  arch/arm/mach-aaed2000/include/mach/system.h
  *
  *  Copyright (c) 2005 Nicolas Bellido Y Ortega
  *
diff --git a/include/asm-arm/arch-aaec2000/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h
index f5708b38fb7..6c8edf4a882 100644
--- a/include/asm-arm/arch-aaec2000/timex.h
+++ b/arch/arm/mach-aaec2000/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/timex.h
+ *  arch/arm/mach-aaec2000/include/mach/timex.h
  *
  *  AAEC-2000 Architecture timex specification
  *
diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h
index 300f4bf3bc7..381ecad1a1b 100644
--- a/include/asm-arm/arch-aaec2000/uncompress.h
+++ b/arch/arm/mach-aaec2000/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/uncompress.h
+ *  arch/arm/mach-aaec2000/include/mach/uncompress.h
  *
  *  Copyright (c) 2005 Nicolas Bellido Y Ortega
  *
diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
index ecb991e2e4f..551f68f666b 100644
--- a/include/asm-arm/arch-aaec2000/vmalloc.h
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-aaec2000/vmalloc.h
+ *  arch/arm/mach-aaec2000/include/mach/vmalloc.h
  *
  *  Copyright (c) 2005 Nicolas Bellido Y Ortega
  *
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5bad6b9b00d..a048b92cb40 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -297,7 +297,7 @@ config MTD_AT91_DATAFLASH_CARD
 	help
 	  Enable support for the DataFlash card.
 
-config MTD_NAND_AT91_BUSWIDTH_16
+config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
 	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
 	help
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 933fa8f55cb..638948c1677 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -17,10 +17,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91cap9.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index dc8b40783d9..abb4aac8fa9 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -20,11 +20,11 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -376,7 +376,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index d688c1dbd92..28594fcc88e 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -14,9 +14,9 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_st.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_st.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 8ced9bc8209..9338825cfcd 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -17,10 +17,10 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -368,7 +368,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 50392ff7151..a72e798a2a4 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -26,7 +26,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_st.h>
+#include <mach/at91_st.h>
 
 static unsigned long last_crtr;
 static u32 irqmask;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 380f12a1220..accb69ec478 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -15,11 +15,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index cae5f52f127..7774d17dde7 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -16,12 +16,12 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -283,7 +283,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 35bf6fd5251..7b51a59ae8b 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 483d436af22..6b89172310c 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -20,11 +20,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91sam9261_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -198,7 +198,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 052074a9f2d..80bfab5680e 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 9762b15f658..c93992f55dc 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -19,11 +19,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9263_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9263_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -352,7 +352,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 5cecbd7de6a..122fd77ed58 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -17,7 +17,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_pit.h>
+#include <mach/at91_pit.h>
 
 
 #define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 902c79893ec..556bddf35b4 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -14,11 +14,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 5f3094870ca..620886341fb 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -16,11 +16,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91sam9rl_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91sam9rl_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -194,7 +194,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index f44647738ee..ad3ec85b279 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -14,9 +14,9 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/at91x40.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/timex.h>
+#include <mach/at91x40.h>
+#include <mach/at91_st.h>
+#include <mach/timex.h>
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index eddc882f1b4..869b5e28d19 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -23,10 +23,10 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/time.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/at91_tc.h>
+#include <mach/at91_tc.h>
 
 /*
  *	3 counter/timer units present.
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 2d3d4b6f7b0..9b27d167bff 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index af2c33aff1a..cdddca54b93 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -28,7 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 117cf6c9afc..196199552eb 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -33,7 +33,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,10 +42,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -188,7 +188,7 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = {
 //	.rdy_pin	= ... not connected
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 9854fc3dd1f..afa1ff0e957 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 81f1ebb4e96..cb7c9a8fa48 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index bb1a5474dda..8db8bd8babd 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -25,7 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 02a70b2f355..43e1aa7ecef 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index 0c1e3858e7d..1f9d3cb64c5 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -24,10 +24,10 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 #include "generic.h"
 
 static void __init at91eb01_map_io(void)
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 3fe054e0056..528656761ff 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index e77fad44383..bfeee8a2af2 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 74aa4325eab..60626e7a349 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index cf1b7b2f76f..a87956c0a74 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 082ed59365a..fe9b9913fa3 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,10 +34,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 6acb55c09ae..dbc912d633c 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,9 +36,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 99b4ec3818d..4c28413426c 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -140,14 +140,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 57a6221943e..e4910cb26c1 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -148,7 +148,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 6a680795c3c..cb20e70b3b0 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -28,7 +28,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -185,7 +185,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 43dfbd0d543..1a9963b811c 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -35,7 +35,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -44,9 +44,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -190,7 +190,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 6605a098011..b1d11960a73 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -32,7 +32,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -194,7 +194,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 45617c20124..d4eba5c0ce0 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -26,7 +26,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -35,8 +35,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -143,13 +143,13 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 }
 
 /* det_pin is not connected */
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 66e77bb2e07..c6dce49c388 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,7 +18,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -27,9 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 837aedf8ffe..f9d0b65da40 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -114,14 +114,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 95800d32bd4..673e5c27214 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -29,7 +29,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -127,14 +127,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index bbbfd06f5e0..36b380aad00 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -33,7 +33,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,9 +42,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 464bdbbf74d..f5c2847161f 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -24,11 +24,10 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/mach-types.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/cpu.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index ee4964abcaf..8392d5b517f 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -20,9 +20,9 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/at91_pio.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/include/asm-arm/arch-at91/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
index 6d71ea2637b..8e7ed5c9081 100644
--- a/include/asm-arm/arch-at91/at91_adc.h
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_adc.h
+ * arch/arm/mach-at91/include/mach/at91_adc.h
  *
  * Copyright (C) SAN People
  *
diff --git a/include/asm-arm/arch-at91/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
index df44c12a12d..03566799d3b 100644
--- a/include/asm-arm/arch-at91/at91_aic.h
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_aic.h
+ * arch/arm/mach-at91/include/mach/at91_aic.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
index 8019ffd0ad3..6dcaa771687 100644
--- a/include/asm-arm/arch-at91/at91_dbgu.h
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_dbgu.h
+ * arch/arm/mach-at91/include/mach/at91_dbgu.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 400ec10014b..550d503a1bc 100644
--- a/include/asm-arm/arch-at91/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_mci.h
+ * arch/arm/mach-at91/include/mach/at91_mci.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h
index 84c3866d309..c6a31bf8a5c 100644
--- a/include/asm-arm/arch-at91/at91_pio.h
+++ b/arch/arm/mach-at91/include/mach/at91_pio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_pio.h
+ * arch/arm/mach-at91/include/mach/at91_pio.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
index 5026325a5ae..0448ac36ead 100644
--- a/include/asm-arm/arch-at91/at91_pit.h
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_pit.h
+ * arch/arm/mach-at91/include/mach/at91_pit.h
  *
  * Periodic Interval Timer (PIT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 2001e81f226..2e3f2894b70 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_pmc.h
+ * arch/arm/mach-at91/include/mach/at91_pmc.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
index fb8d1618a23..7cd1b39aaa4 100644
--- a/include/asm-arm/arch-at91/at91_rstc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_rstc.h
+ * arch/arm/mach-at91/include/mach/at91_rstc.h
  *
  * Reset Controller (RSTC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h
index af9bd28174c..e56f4701a3e 100644
--- a/include/asm-arm/arch-at91/at91_rtc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_rtc.h
+ * arch/arm/mach-at91/include/mach/at91_rtc.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h
index 39a32633b27..71782e5d215 100644
--- a/include/asm-arm/arch-at91/at91_rtt.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtt.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_rtt.h
+ * arch/arm/mach-at91/include/mach/at91_rtt.h
  *
  * Real-time Timer (RTT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index 581fa41d90e..60be5ae624f 100644
--- a/include/asm-arm/arch-at91/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_shdwc.h
+ * arch/arm/mach-at91/include/mach/at91_shdwc.h
  *
  * Shutdown Controller (SHDWC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h
index f9b9a846499..2f6ba0c5636 100644
--- a/include/asm-arm/arch-at91/at91_spi.h
+++ b/arch/arm/mach-at91/include/mach/at91_spi.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_spi.h
+ * arch/arm/mach-at91/include/mach/at91_spi.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h
index 0ecc73460b5..a81114c11c7 100644
--- a/include/asm-arm/arch-at91/at91_ssc.h
+++ b/arch/arm/mach-at91/include/mach/at91_ssc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_ssc.h
+ * arch/arm/mach-at91/include/mach/at91_ssc.h
  *
  * Copyright (C) SAN People
  *
diff --git a/include/asm-arm/arch-at91/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h
index 30446e2ea77..8847173e410 100644
--- a/include/asm-arm/arch-at91/at91_st.h
+++ b/arch/arm/mach-at91/include/mach/at91_st.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_st.h
+ * arch/arm/mach-at91/include/mach/at91_st.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_tc.h b/arch/arm/mach-at91/include/mach/at91_tc.h
index b85d3faeef5..46a317fd716 100644
--- a/include/asm-arm/arch-at91/at91_tc.h
+++ b/arch/arm/mach-at91/include/mach/at91_tc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_tc.h
+ * arch/arm/mach-at91/include/mach/at91_tc.h
  *
  * Copyright (C) SAN People
  *
diff --git a/include/asm-arm/arch-at91/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h
index f9f2e3cd95c..bb2880f6ba3 100644
--- a/include/asm-arm/arch-at91/at91_twi.h
+++ b/arch/arm/mach-at91/include/mach/at91_twi.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_twi.h
+ * arch/arm/mach-at91/include/mach/at91_twi.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
index 1014e9bf181..973b4526a98 100644
--- a/include/asm-arm/arch-at91/at91_wdt.h
+++ b/arch/arm/mach-at91/include/mach/at91_wdt.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_wdt.h
+ * arch/arm/mach-at91/include/mach/at91_wdt.h
  *
  * Watchdog Timer (WDT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index 6f14d9053ac..4a4b64135a9 100644
--- a/include/asm-arm/arch-at91/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91cap9.h
+ * arch/arm/mach-at91/include/mach/at91cap9.h
  *
  *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
  *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
index efdb23af1ee..bca878f3bd8 100644
--- a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
+ * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
  *
  * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
  * Based on AT91CAP9 datasheet revision B.
diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
index ddbd4873c84..4b9d4aff4b4 100644
--- a/include/asm-arm/arch-at91/at91cap9_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91cap9_matrix.h
+ * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
  *
  *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
  *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
diff --git a/include/asm-arm/arch-at91/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index e8fc0b1c33f..78983155a07 100644
--- a/include/asm-arm/arch-at91/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91rm9200.h
+ * arch/arm/mach-at91/include/mach/at91rm9200.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91rm9200_emac.h b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
index 0c417af5fe7..b8260cd8041 100644
--- a/include/asm-arm/arch-at91/at91rm9200_emac.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91rm9200_emac.h
+ * arch/arm/mach-at91/include/mach/at91rm9200_emac.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
index 24d012939cc..d34e4ed8934 100644
--- a/include/asm-arm/arch-at91/at91rm9200_mc.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91rm9200_mc.h
+ * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 889872a3f2a..43c396b9b4c 100644
--- a/include/asm-arm/arch-at91/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9260.h
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
  *
  * (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
index a8e9fec6c73..f027de5df95 100644
--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9260_matrix.h
+ * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
  *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9260 datasheet revision B.
diff --git a/include/asm-arm/arch-at91/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index c7c4778dac4..3a348ca2077 100644
--- a/include/asm-arm/arch-at91/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9261.h
+ * arch/arm/mach-at91/include/mach/at91sam9261.h
  *
  * Copyright (C) SAN People
  *
diff --git a/include/asm-arm/arch-at91/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
index 6f072421be5..db62b1f1830 100644
--- a/include/asm-arm/arch-at91/at91sam9261_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9261_matrix.h
+ * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
  *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index 018a647311d..2091f1e42d4 100644
--- a/include/asm-arm/arch-at91/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9263.h
+ * arch/arm/mach-at91/include/mach/at91sam9263.h
  *
  * (C) 2007 Atmel Corporation.
  *
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
index 72f6e668e41..9b3efd3eb2f 100644
--- a/include/asm-arm/arch-at91/at91sam9263_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9263_matrix.h
+ * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
  *
  *  Copyright (C) 2006 Atmel Corporation.
  *
diff --git a/include/asm-arm/arch-at91/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index d3b8b3da6b4..1921181c63c 100644
--- a/include/asm-arm/arch-at91/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9_sdramc.h
+ * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
  *
  * SDRAM Controllers (SDRAMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index 9e49eed31e5..ec6ad1338b5 100644
--- a/include/asm-arm/arch-at91/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9_smc.h
+ * arch/arm/mach-at91/include/mach/at91sam9_smc.h
  *
  * Static Memory Controllers (SMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 622e56f81d4..fc2de6c09c8 100644
--- a/include/asm-arm/arch-at91/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9260.h
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
  *
  *  Copyright (C) 2007 Atmel Corporation
  *
diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
index 84224174e6a..5f9149071fe 100644
--- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9rl_matrix.h
+ * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
  *
  *  Copyright (C) 2007 Atmel Corporation
  *
diff --git a/include/asm-arm/arch-at91/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index 612203e0177..d34cdb8abdc 100644
--- a/include/asm-arm/arch-at91/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91x40.h
+ * arch/arm/mach-at91/include/mach/at91x40.h
  *
  * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
  *
diff --git a/include/asm-arm/arch-at91/board.h b/arch/arm/mach-at91/include/mach/board.h
index 48bbd854f57..acd60f2a072 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/board.h
+ * arch/arm/mach-at91/include/mach/board.h
  *
  *  Copyright (C) 2005 HP Labs
  *
diff --git a/include/asm-arm/arch-at91/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 52df794205c..dbfd9f73f80 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/cpu.h
+ * arch/arm/mach-at91/include/mach/cpu.h
  *
  *  Copyright (C) 2006 SAN People
  *
@@ -13,8 +13,8 @@
 #ifndef __ASM_ARCH_CPU_H
 #define __ASM_ARCH_CPU_H
 
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
 
 
 #define ARCH_ID_AT91RM9200	0x09290780
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 13e9f5e1d4f..29052ba66ad 100644
--- a/include/asm-arm/arch-at91/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/debug-macro.S
+ * arch/arm/mach-at91/include/mach/debug-macro.S
  *
  *  Copyright (C) 2003-2005 SAN People
  *
@@ -11,8 +11,8 @@
  *
 */
 
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-at91/dma.h b/arch/arm/mach-at91/include/mach/dma.h
index 774565412be..e4f90c17761 100644
--- a/include/asm-arm/arch-at91/dma.h
+++ b/arch/arm/mach-at91/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/dma.h
+ * arch/arm/mach-at91/include/mach/dma.h
  *
  *  Copyright (C) 2003 SAN People
  *
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
index 1005eee6219..7ab68f97222 100644
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/entry-macro.S
+ * arch/arm/mach-at91/include/mach/entry-macro.S
  *
  *  Copyright (C) 2003-2005 SAN People
  *
@@ -10,8 +10,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/hardware.h>
-#include <asm/arch/at91_aic.h>
+#include <mach/hardware.h>
+#include <mach/at91_aic.h>
 
 	.macro	disable_fiq
 	.endm
diff --git a/include/asm-arm/arch-at91/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 0a241e2fb67..76d76e2fa69 100644
--- a/include/asm-arm/arch-at91/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/gpio.h
+ * arch/arm/mach-at91/include/mach/gpio.h
  *
  *  Copyright (C) 2005 HP Labs
  *
diff --git a/include/asm-arm/arch-at91/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 016a3a3f663..da0b681c652 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/hardware.h
+ * arch/arm/mach-at91/include/mach/hardware.h
  *
  *  Copyright (C) 2003 SAN People
  *  Copyright (C) 2003 ATMEL
@@ -17,19 +17,19 @@
 #include <asm/sizes.h>
 
 #if defined(CONFIG_ARCH_AT91RM9200)
-#include <asm/arch/at91rm9200.h>
+#include <mach/at91rm9200.h>
 #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
-#include <asm/arch/at91sam9260.h>
+#include <mach/at91sam9260.h>
 #elif defined(CONFIG_ARCH_AT91SAM9261)
-#include <asm/arch/at91sam9261.h>
+#include <mach/at91sam9261.h>
 #elif defined(CONFIG_ARCH_AT91SAM9263)
-#include <asm/arch/at91sam9263.h>
+#include <mach/at91sam9263.h>
 #elif defined(CONFIG_ARCH_AT91SAM9RL)
-#include <asm/arch/at91sam9rl.h>
+#include <mach/at91sam9rl.h>
 #elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9.h>
+#include <mach/at91cap9.h>
 #elif defined(CONFIG_ARCH_AT91X40)
-#include <asm/arch/at91x40.h>
+#include <mach/at91x40.h>
 #else
 #error "Unsupported AT91 processor"
 #endif
diff --git a/include/asm-arm/arch-at91/io.h b/arch/arm/mach-at91/include/mach/io.h
index f8beaa22846..1611bd03f52 100644
--- a/include/asm-arm/arch-at91/io.h
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/io.h
+ * arch/arm/mach-at91/include/mach/io.h
  *
  *  Copyright (C) 2003 SAN People
  *
diff --git a/include/asm-arm/arch-at91/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
index 70b1216dce5..bda29ccbcd9 100644
--- a/include/asm-arm/arch-at91/irqs.h
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/irqs.h
+ * arch/arm/mach-at91/include/mach/irqs.h
  *
  *  Copyright (C) 2004 SAN People
  *
@@ -22,7 +22,7 @@
 #define __ASM_ARCH_IRQS_H
 
 #include <asm/io.h>
-#include <asm/arch/at91_aic.h>
+#include <mach/at91_aic.h>
 
 #define NR_AIC_IRQS 32
 
diff --git a/include/asm-arm/arch-at91/memory.h b/arch/arm/mach-at91/include/mach/memory.h
index 4835d678450..9dd1b8c79b0 100644
--- a/include/asm-arm/arch-at91/memory.h
+++ b/arch/arm/mach-at91/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/memory.h
+ * arch/arm/mach-at91/include/mach/memory.h
  *
  *  Copyright (C) 2004 SAN People
  *
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define PHYS_OFFSET	(AT91_SDRAM_BASE)
 
diff --git a/include/asm-arm/arch-at91/system.h b/arch/arm/mach-at91/include/mach/system.h
index 6bf846098ea..e712658d966 100644
--- a/include/asm-arm/arch-at91/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/system.h
+ * arch/arm/mach-at91/include/mach/system.h
  *
  *  Copyright (C) 2003 SAN People
  *
@@ -21,9 +21,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/hardware.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/at91_dbgu.h>
+#include <mach/hardware.h>
+#include <mach/at91_st.h>
+#include <mach/at91_dbgu.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-at91/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 298d8313cda..d84c9948bec 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/timex.h
+ * arch/arm/mach-at91/include/mach/timex.h
  *
  *  Copyright (C) 2003 SAN People
  *
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_TIMEX_H
 #define __ASM_ARCH_TIMEX_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #if defined(CONFIG_ARCH_AT91RM9200)
 
diff --git a/include/asm-arm/arch-at91/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index f5636a8f613..0410d548e9b 100644
--- a/include/asm-arm/arch-at91/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/uncompress.h
+ * arch/arm/mach-at91/include/mach/uncompress.h
  *
  *  Copyright (C) 2003 SAN People
  *
diff --git a/include/asm-arm/arch-at91/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
index bb05e70e932..8eb459f3f5b 100644
--- a/include/asm-arm/arch-at91/vmalloc.h
+++ b/arch/arm/mach-at91/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/vmalloc.h
+ * arch/arm/mach-at91/include/mach/vmalloc.h
  *
  *  Copyright (C) 2003 SAN People
  *
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index ca87587b2b4..da3494a5342 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -25,9 +25,8 @@
 #include <linux/mm.h>
 #include <linux/types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
 #include <asm/setup.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 9cdcda500fe..fec03c59ff9 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -13,9 +13,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/mach-types.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 8ab4feb1ec5..ec2fe4ca1e2 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -23,16 +23,15 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
 
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_pmc.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 #ifdef CONFIG_ARCH_AT91RM9200
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
@@ -42,7 +41,7 @@
 #define sdram_selfrefresh_disable()	do {} while (0)
 
 #elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9_ddrsdr.h>
+#include <mach/at91cap9_ddrsdr.h>
 
 static u32 saved_lpr;
 
@@ -59,7 +58,7 @@ static inline void sdram_selfrefresh_enable(void)
 #define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
 
 #else
-#include <asm/arch/at91sam9_sdramc.h>
+#include <mach/at91sam9_sdramc.h>
 
 #ifdef CONFIG_ARCH_AT91SAM9263
 /*
@@ -92,8 +91,8 @@ static inline void sdram_selfrefresh_enable(void)
  */
 #if defined(AT91_SHDWC)
 
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 static void __init show_reset_status(void)
 {
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index c13ca6c56ba..474616dcd7a 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
 #include <asm/setup.h>
@@ -33,7 +33,7 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 831df007f6c..aa02aa5a01f 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index e2b2c5ac8a8..8ada2018497 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -27,7 +27,7 @@
 
 #include <linux/kernel.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 0d52e085125..c58e32ec4c5 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index 3792ab4f099..7122b3d2104 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <linux/initrd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
diff --git a/include/asm-arm/arch-clps711x/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
index 1588a365f61..1588a365f61 100644
--- a/include/asm-arm/arch-clps711x/autcpu12.h
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
diff --git a/include/asm-arm/arch-clps711x/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index bc0a5760722..64baf9f8740 100644
--- a/include/asm-arm/arch-clps711x/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-clps711x/debug-macro.S
+/* arch/arm/mach-clps711x/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-clps711x/dma.h b/arch/arm/mach-clps711x/include/mach/dma.h
index 61099793842..0d620e86953 100644
--- a/include/asm-arm/arch-clps711x/dma.h
+++ b/arch/arm/mach-clps711x/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/dma.h
+ *  arch/arm/mach-clps711x/include/mach/dma.h
  *
  *  Copyright (C) 1997,1998 Russell King
  *
diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
index cd8c5a0bc7b..90fa2f70489 100644
--- a/include/asm-arm/arch-clps711x/entry-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-clps711x/entry-macro.S
+ * arch/arm/mach-clps711x/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for CLPS711X-based platforms
  *
@@ -7,7 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
 		.macro	disable_fiq
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 0fdbe72fff2..4c3e101b96c 100644
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/hardware.h
+ *  arch/arm/mach-clps711x/include/mach/hardware.h
  *
  *  This file contains the hardware definitions of the Prospector P720T.
  *
diff --git a/include/asm-arm/arch-clps711x/io.h b/arch/arm/mach-clps711x/include/mach/io.h
index 53d790202c1..4c844008767 100644
--- a/include/asm-arm/arch-clps711x/io.h
+++ b/arch/arm/mach-clps711x/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/io.h
+ *  arch/arm/mach-clps711x/include/mach/io.h
  *
  *  Copyright (C) 1999 ARM Limited
  *
@@ -20,7 +20,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-clps711x/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h
index 76025dc8763..30b7e97285a 100644
--- a/include/asm-arm/arch-clps711x/irqs.h
+++ b/arch/arm/mach-clps711x/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/irqs.h
+ *  arch/arm/mach-clps711x/include/mach/irqs.h
  *
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
  *
diff --git a/include/asm-arm/arch-clps711x/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index 42768cc8bfb..71c2fa70c8e 100644
--- a/include/asm-arm/arch-clps711x/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/memory.h
+ *  arch/arm/mach-clps711x/include/mach/memory.h
  *
  *  Copyright (C) 1999 ARM Limited
  *
diff --git a/include/asm-arm/arch-clps711x/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
index 960578a22a8..f7f4c120189 100644
--- a/include/asm-arm/arch-clps711x/syspld.h
+++ b/arch/arm/mach-clps711x/include/mach/syspld.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/syspld.h
+ *  arch/arm/mach-clps711x/include/mach/syspld.h
  *
  *  System Control PLD register definitions.
  *
diff --git a/include/asm-arm/arch-clps711x/system.h b/arch/arm/mach-clps711x/include/mach/system.h
index 11e1491535a..a8eade40317 100644
--- a/include/asm-arm/arch-clps711x/system.h
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/system.h
+ *  arch/arm/mach-clps711x/include/mach/system.h
  *
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *
@@ -20,7 +20,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 #include <asm/io.h>
 
diff --git a/include/asm-arm/arch-clps711x/time.h b/arch/arm/mach-clps711x/include/mach/time.h
index 5edaae1c61d..8fe283ccd1f 100644
--- a/include/asm-arm/arch-clps711x/time.h
+++ b/arch/arm/mach-clps711x/include/mach/time.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/time.h
+ *  arch/arm/mach-clps711x/include/mach/time.h
  *
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
  *
diff --git a/include/asm-arm/arch-clps711x/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
index dcbb381da3d..ac8823ccff9 100644
--- a/include/asm-arm/arch-clps711x/timex.h
+++ b/arch/arm/mach-clps711x/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/timex.h
+ *  arch/arm/mach-clps711x/include/mach/timex.h
  *
  *  Prospector 720T architecture timex specifications
  *
diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
index 03d233ae87c..7164310dea7 100644
--- a/include/asm-arm/arch-clps711x/uncompress.h
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/uncompress.h
+ *  arch/arm/mach-clps711x/include/mach/uncompress.h
  *
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *
@@ -17,8 +17,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
 #undef CLPS7111_BASE
diff --git a/include/asm-arm/arch-clps711x/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
index a5dfe96abc9..ea6cc7beff2 100644
--- a/include/asm-arm/arch-clps711x/vmalloc.h
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-clps711x/vmalloc.h
+ *  arch/arm/mach-clps711x/include/mach/vmalloc.h
  *
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
  *
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c
index ca102960f52..38623cfcac5 100644
--- a/arch/arm/mach-clps711x/irq.c
+++ b/arch/arm/mach-clps711x/irq.c
@@ -21,7 +21,7 @@
 #include <linux/list.h>
 
 #include <asm/mach/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index a00f77ef8df..a7b4591205a 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -25,7 +25,7 @@
 #include <linux/bootmem.h>
 
 #include <asm/sizes.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
index 4915b352496..262c3c36145 100644
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index c8ecd2480c2..f51f97d4f21 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/syspld.h>
+#include <mach/syspld.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index e5dc33f1f95..ef1fcd17189 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -22,7 +22,7 @@
 #include <linux/irq.h>
 #include <linux/sched.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index 2ac63671ea5..cc1b82179e8 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -21,7 +21,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/include/asm-arm/arch-cl7500/acornfb.h b/arch/arm/mach-clps7500/include/mach/acornfb.h
index aea6330c974..aea6330c974 100644
--- a/include/asm-arm/arch-cl7500/acornfb.h
+++ b/arch/arm/mach-clps7500/include/mach/acornfb.h
diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/arch/arm/mach-clps7500/include/mach/debug-macro.S
index 9a2b67d2409..af4104e7e84 100644
--- a/include/asm-arm/arch-cl7500/debug-macro.S
+++ b/arch/arm/mach-clps7500/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-cl7500/debug-macro.S
+/* arch/arm/mach-clps7500/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-cl7500/dma.h b/arch/arm/mach-clps7500/include/mach/dma.h
index 591ed255189..63fcde50549 100644
--- a/include/asm-arm/arch-cl7500/dma.h
+++ b/arch/arm/mach-clps7500/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-cl7500/dma.h
+ * arch/arm/mach-clps7500/include/mach/dma.h
  *
  * Copyright (C) 1999 Nexus Electronics Ltd.
  */
diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/arch/arm/mach-clps7500/include/mach/entry-macro.S
index 038b761fdad..4e7e5414409 100644
--- a/include/asm-arm/arch-rpc/entry-macro.S
+++ b/arch/arm/mach-clps7500/include/mach/entry-macro.S
@@ -1,4 +1,4 @@
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/entry-macro-iomd.S>
 
 	.equ	ioc_base_high, IOC_BASE & 0xff000000
diff --git a/include/asm-arm/arch-cl7500/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h
index 1adfd18e615..d66578a3371 100644
--- a/include/asm-arm/arch-cl7500/hardware.h
+++ b/arch/arm/mach-clps7500/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-cl7500/hardware.h
+ * arch/arm/mach-clps7500/include/mach/hardware.h
  *
  * Copyright (C) 1996-1999 Russell King.
  * Copyright (C) 1999 Nexus Electronics Ltd.
@@ -10,7 +10,7 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 #include <asm/hardware/iomd.h>
 
 #ifdef __ASSEMBLY__
diff --git a/include/asm-arm/arch-cl7500/io.h b/arch/arm/mach-clps7500/include/mach/io.h
index 89a33287f4f..2ff2860889e 100644
--- a/include/asm-arm/arch-cl7500/io.h
+++ b/arch/arm/mach-clps7500/include/mach/io.h
@@ -1,6 +1,6 @@
 /*
- * linux/include/asm-arm/arch-cl7500/io.h
- *  from linux/include/asm-arm/arch-rpc/io.h
+ * arch/arm/mach-clps7500/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
  *
  * Copyright (C) 1997 Russell King
  *
@@ -10,7 +10,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-cl7500/irq.h b/arch/arm/mach-clps7500/include/mach/irq.h
index 4b286331f3f..e8da3c58df7 100644
--- a/include/asm-arm/arch-cl7500/irq.h
+++ b/arch/arm/mach-clps7500/include/mach/irq.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-cl7500/irq.h
+ * arch/arm/mach-clps7500/include/mach/irq.h
  *
  * Copyright (C) 1996 Russell King
  * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
diff --git a/include/asm-arm/arch-cl7500/irqs.h b/arch/arm/mach-clps7500/include/mach/irqs.h
index f20996eadf1..bee66b487f5 100644
--- a/include/asm-arm/arch-cl7500/irqs.h
+++ b/arch/arm/mach-clps7500/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-cl7500/irqs.h
+ * arch/arm/mach-clps7500/include/mach/irqs.h
  *
  * Copyright (C) 1999 Nexus Electronics Ltd
  */
diff --git a/include/asm-arm/arch-cl7500/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
index 3178140e24c..3326aa99d3e 100644
--- a/include/asm-arm/arch-cl7500/memory.h
+++ b/arch/arm/mach-clps7500/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-cl7500/memory.h
+ * arch/arm/mach-clps7500/include/mach/memory.h
  *
  * Copyright (c) 1996,1997,1998 Russell King.
  *
diff --git a/include/asm-arm/arch-cl7500/system.h b/arch/arm/mach-clps7500/include/mach/system.h
index a9505d6a74d..624fc2830ae 100644
--- a/include/asm-arm/arch-cl7500/system.h
+++ b/arch/arm/mach-clps7500/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-cl7500/system.h
+ * arch/arm/mach-clps7500/include/mach/system.h
  *
  * Copyright (c) 1999 Nexus Electronics Ltd.
  */
diff --git a/include/asm-arm/arch-cl7500/timex.h b/arch/arm/mach-clps7500/include/mach/timex.h
index 8a4175fc010..dfaa9b42575 100644
--- a/include/asm-arm/arch-cl7500/timex.h
+++ b/arch/arm/mach-clps7500/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-cl7500/timex.h
+ * arch/arm/mach-clps7500/include/mach/timex.h
  *
  * CL7500 architecture timex specifications
  *
diff --git a/include/asm-arm/arch-cl7500/uncompress.h b/arch/arm/mach-clps7500/include/mach/uncompress.h
index c437e0c88c3..d7d0af4b49f 100644
--- a/include/asm-arm/arch-cl7500/uncompress.h
+++ b/arch/arm/mach-clps7500/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-cl7500/uncompress.h
+ * arch/arm/mach-clps7500/include/mach/uncompress.h
  *
  * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
  */
diff --git a/include/asm-arm/arch-cl7500/vmalloc.h b/arch/arm/mach-clps7500/include/mach/vmalloc.h
index ba8d7a84456..8fc5406d1b6 100644
--- a/include/asm-arm/arch-cl7500/vmalloc.h
+++ b/arch/arm/mach-clps7500/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
- * linux/include/asm-arm/arch-cl7500/vmalloc.h
+ * arch/arm/mach-clps7500/include/mach/vmalloc.h
  */
 #define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 9e4024c4965..13435578781 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -20,13 +20,13 @@
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 /* other misc. init functions */
 void __init davinci_psc_init(void);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index c6b94f60e0b..d46c69b55aa 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -17,10 +17,10 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/psc.h>
+#include <mach/psc.h>
 #include "clock.h"
 
 /* PLL/Reset register offsets */
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 9c67886e718..c9cb4f09b18 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -20,9 +20,9 @@
 #include <linux/irq.h>
 #include <linux/bitops.h>
 
-#include <asm/arch/irqs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
 
diff --git a/include/asm-arm/arch-davinci/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
index cc168b7a14f..38bdd49bc18 100644
--- a/include/asm-arm/arch-davinci/clock.h
+++ b/arch/arm/mach-davinci/include/mach/clock.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-davinci/clock.h
+ * arch/arm/mach-davinci/include/mach/clock.h
  *
  * Clock control driver for DaVinci - header file
  *
diff --git a/include/asm-arm/arch-davinci/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a97dfbb15e5..a97dfbb15e5 100644
--- a/include/asm-arm/arch-davinci/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
diff --git a/include/asm-arm/arch-davinci/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index e6c0f0d5d06..e6c0f0d5d06 100644
--- a/include/asm-arm/arch-davinci/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
diff --git a/include/asm-arm/arch-davinci/dma.h b/arch/arm/mach-davinci/include/mach/dma.h
index 8e2f2d0ba66..8e2f2d0ba66 100644
--- a/include/asm-arm/arch-davinci/dma.h
+++ b/arch/arm/mach-davinci/include/mach/dma.h
diff --git a/include/asm-arm/arch-davinci/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index 3ebfcc5cb58..039b84f933b 100644
--- a/include/asm-arm/arch-davinci/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -8,8 +8,8 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <asm/arch/io.h>
-#include <asm/arch/irqs.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-davinci/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index ff8de30b2fb..ec151ccf1e8 100644
--- a/include/asm-arm/arch-davinci/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -14,7 +14,7 @@
 #define	__DAVINCI_GPIO_H
 
 #include <linux/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * basic gpio routines
diff --git a/include/asm-arm/arch-davinci/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index a2e8969afac..a2e8969afac 100644
--- a/include/asm-arm/arch-davinci/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
diff --git a/include/asm-arm/arch-davinci/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index e2f54168abd..e2f54168abd 100644
--- a/include/asm-arm/arch-davinci/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
diff --git a/include/asm-arm/arch-davinci/io.h b/arch/arm/mach-davinci/include/mach/io.h
index e7accb91086..e7accb91086 100644
--- a/include/asm-arm/arch-davinci/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
diff --git a/include/asm-arm/arch-davinci/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index f4c5ca6da9f..f4c5ca6da9f 100644
--- a/include/asm-arm/arch-davinci/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
diff --git a/include/asm-arm/arch-davinci/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index dd1625c23cf..dd1625c23cf 100644
--- a/include/asm-arm/arch-davinci/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
diff --git a/include/asm-arm/arch-davinci/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index c24b6782804..c24b6782804 100644
--- a/include/asm-arm/arch-davinci/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
diff --git a/include/asm-arm/arch-davinci/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 4977aa071e1..4977aa071e1 100644
--- a/include/asm-arm/arch-davinci/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
diff --git a/include/asm-arm/arch-davinci/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index ed418ef7680..fb8cb229bfd 100644
--- a/include/asm-arm/arch-davinci/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 #define DAVINCI_UART0_BASE   (IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE   (IO_PHYS + 0x20400)
diff --git a/include/asm-arm/arch-davinci/system.h b/arch/arm/mach-davinci/include/mach/system.h
index 440ac515804..84ff77aeb73 100644
--- a/include/asm-arm/arch-davinci/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -12,7 +12,7 @@
 #define __ASM_ARCH_SYSTEM_H
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 extern void davinci_watchdog_reset(void);
 
diff --git a/include/asm-arm/arch-davinci/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
index 52827567841..52827567841 100644
--- a/include/asm-arm/arch-davinci/timex.h
+++ b/arch/arm/mach-davinci/include/mach/timex.h
diff --git a/include/asm-arm/arch-davinci/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index f6d1570f720..8c165def37b 100644
--- a/include/asm-arm/arch-davinci/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -11,7 +11,7 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
-#include <asm/arch/serial.h>
+#include <mach/serial.h>
 
 /* PORT_16C550A, in polled non-fifo mode */
 
diff --git a/include/asm-arm/arch-davinci/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
index 9b47fa89b33..b98bd9e92fd 100644
--- a/include/asm-arm/arch-davinci/vmalloc.h
+++ b/arch/arm/mach-davinci/include/mach/vmalloc.h
@@ -9,7 +9,7 @@
  * or implied.
  */
 #include <asm/memory.h>
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 /* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
 #define VMALLOC_END	  (IO_VIRT - (2<<20))
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 47787ff84a6..5bb66b61c1a 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -17,7 +17,7 @@
 #include <asm/memory.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 extern void davinci_check_revision(void);
 
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 1333d84d2e4..12ca9f29f84 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -23,7 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 92d26bd305b..8ff9d8aca60 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -11,9 +11,9 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 /* System control register offsets */
 #define PINMUX0         0x00
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1334416559a..aa2fc375a32 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,9 +23,9 @@
 #include <linux/init.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/psc.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
 
 /* PSC register offsets */
 #define EPCPR		0x070
@@ -70,9 +70,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
 
-	if (id < 0)
-		return;
-
 	mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
 	if (enable)
 		mdctl |= 0x00000003;	/* Enable Module */
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 8368c93c788..caf101e2cc6 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -29,9 +29,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/serial.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/serial.h>
+#include <mach/irqs.h>
 
 #define UART_DAVINCI_PWREMU 0x0c
 
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index e96a3dcdc1a..206e80d4171 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -17,13 +17,13 @@
 #include <linux/spinlock.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/errno.h>
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 static struct clock_event_device clockevent_davinci;
 
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 7710e14b526..65cc7c27191 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -15,7 +15,7 @@
 #include <linux/serial_8250.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/setup.h>
diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 9213bfe4831..1dde8227f3a 100644
--- a/include/asm-arm/arch-ebsa110/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-ebsa110/debug-macro.S
+/* arch/arm/mach-ebsa110/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-ebsa110/dma.h b/arch/arm/mach-ebsa110/include/mach/dma.h
index c52f9e2ab0b..780a04c8bbe 100644
--- a/include/asm-arm/arch-ebsa110/dma.h
+++ b/arch/arm/mach-ebsa110/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa110/dma.h
+ *  arch/arm/mach-ebsa110/include/mach/dma.h
  *
  *  Copyright (C) 1997,1998 Russell King
  *
diff --git a/include/asm-arm/arch-ebsa110/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
index f242be5c49b..cc3e5992f6b 100644
--- a/include/asm-arm/arch-ebsa110/entry-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ebsa110/entry-macro.S
+ * arch/arm/mach-ebsa110/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for ebsa110 platform.
  *
diff --git a/include/asm-arm/arch-ebsa110/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
index 3ce864def41..4b2fb774390 100644
--- a/include/asm-arm/arch-ebsa110/hardware.h
+++ b/arch/arm/mach-ebsa110/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa110/hardware.h
+ *  arch/arm/mach-ebsa110/include/mach/hardware.h
  *
  *  Copyright (C) 1996-2000 Russell King.
  *
diff --git a/include/asm-arm/arch-ebsa110/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
index 44a4001de80..f68daa632af 100644
--- a/include/asm-arm/arch-ebsa110/io.h
+++ b/arch/arm/mach-ebsa110/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa110/io.h
+ *  arch/arm/mach-ebsa110/include/mach/io.h
  *
  *  Copyright (C) 1997,1998 Russell King
  *
diff --git a/include/asm-arm/arch-ebsa110/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
index ded9bd9d7b8..a8f3771bc06 100644
--- a/include/asm-arm/arch-ebsa110/irqs.h
+++ b/arch/arm/mach-ebsa110/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa110/irqs.h
+ *  arch/arm/mach-ebsa110/include/mach/irqs.h
  *
  *  Copyright (C) 1996 Russell King
  *
diff --git a/include/asm-arm/arch-ebsa110/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
index c7c500e176d..eea4b75b657 100644
--- a/include/asm-arm/arch-ebsa110/memory.h
+++ b/arch/arm/mach-ebsa110/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa110/memory.h
+ *  arch/arm/mach-ebsa110/include/mach/memory.h
  *
  *  Copyright (C) 1996-1999 Russell King.
  *
diff --git a/include/asm-arm/arch-ebsa110/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
index d7c8fece0bc..350a028997e 100644
--- a/include/asm-arm/arch-ebsa110/system.h
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa110/system.h
+ *  arch/arm/mach-ebsa110/include/mach/system.h
  *
  *  Copyright (C) 1996-2000 Russell King.
  *
diff --git a/include/asm-arm/arch-ebsa110/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h
index 1e9ef045092..4fb43b22a10 100644
--- a/include/asm-arm/arch-ebsa110/timex.h
+++ b/arch/arm/mach-ebsa110/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa110/timex.h
+ *  arch/arm/mach-ebsa110/include/mach/timex.h
  *
  *  Copyright (C) 1997, 1998 Russell King
  *
diff --git a/include/asm-arm/arch-ebsa110/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
index ae5b775eb0b..32041509fbf 100644
--- a/include/asm-arm/arch-ebsa110/uncompress.h
+++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa110/uncompress.h
+ *  arch/arm/mach-ebsa110/include/mach/uncompress.h
  *
  *  Copyright (C) 1996,1997,1998 Russell King
  *
diff --git a/include/asm-arm/arch-ebsa110/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
index 26674ba4683..9b44c19e95e 100644
--- a/include/asm-arm/arch-ebsa110/vmalloc.h
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa110/vmalloc.h
+ *  arch/arm/mach-ebsa110/include/mach/vmalloc.h
  *
  *  Copyright (C) 1998 Russell King
  *
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index 6b2380e153e..53748f5462e 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,7 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
 
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 3bc8c5e708e..6a6ea57c2a4 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -15,7 +15,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index ac5d5818eb7..aa1fb352fb8 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index f62c35500bb..6062e47f204 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <asm/div64.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 struct clk {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 5fed5760850..f99f4366939 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,7 +36,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -46,7 +46,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include <asm/hardware/vic.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
index 0315615b74d..97550c0ad7b 100644
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
index 62e064bab1d..99b01d44bf1 100644
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ b/arch/arm/mach-ep93xx/edb9302a.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
index d6a5698da91..9fb72d01a36 100644
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ b/arch/arm/mach-ep93xx/edb9307.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
index e310e4d7299..87267a574f5 100644
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -20,7 +20,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
index 249ca9e57bc..7e373950be4 100644
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ b/arch/arm/mach-ep93xx/edb9315.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
index 7ca0e6170a4..08a7c9bfb68 100644
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 694590a451c..9b41ec1f089 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index dc2e4c00d98..0f3fb87ca4b 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 
diff --git a/include/asm-arm/arch-ep93xx/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index 397565a0c67..802858bc809 100644
--- a/include/asm-arm/arch-ep93xx/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/debug-macro.S
+ * arch/arm/mach-ep93xx/include/mach/debug-macro.S
  * Debugging macro include header
  *
  * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
@@ -9,7 +9,7 @@
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  */
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
new file mode 100644
index 00000000000..d0fa9656e92
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
diff --git a/include/asm-arm/arch-ep93xx/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
index 241ec221a04..96b85e2c2c0 100644
--- a/include/asm-arm/arch-ep93xx/entry-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/entry-macro.S
+ * arch/arm/mach-ep93xx/include/mach/entry-macro.S
  * IRQ demultiplexing for EP93xx
  *
  * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
@@ -9,7 +9,7 @@
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  */
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 625c6f0abc0..9f4458c8e07 100644
--- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+ * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
  */
 
 #ifndef __ASM_ARCH_EP93XX_REGS_H
diff --git a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
new file mode 100644
index 00000000000..21fe2b922aa
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
+ */
diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index 186e7c715f8..f7020414c5d 100644
--- a/include/asm-arm/arch-ep93xx/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/gpio.h
+ * arch/arm/mach-ep93xx/include/mach/gpio.h
  */
 
 #ifndef __ASM_ARCH_GPIO_H
diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 9b69f454065..529807d182b 100644
--- a/include/asm-arm/arch-ep93xx/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -1,6 +1,8 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/hardware.h
+ * arch/arm/mach-ep93xx/include/mach/hardware.h
  */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
 
 #include "ep93xx-regs.h"
 
@@ -10,3 +12,5 @@
 
 #include "gesbc9312.h"
 #include "ts72xx.h"
+
+#endif
diff --git a/include/asm-arm/arch-ep93xx/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index 7b4d25e2906..1ab9a90ad33 100644
--- a/include/asm-arm/arch-ep93xx/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/io.h
+ * arch/arm/mach-ep93xx/include/mach/io.h
  */
 
 #define IO_SPACE_LIMIT		0xffffffff
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/arch/arm/mach-ep93xx/include/mach/irqs.h
index 53d4a68bfc8..ff98390bbf0 100644
--- a/include/asm-arm/arch-ep93xx/irqs.h
+++ b/arch/arm/mach-ep93xx/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/irqs.h
+ * arch/arm/mach-ep93xx/include/mach/irqs.h
  */
 
 #ifndef __ASM_ARCH_IRQS_H
diff --git a/include/asm-arm/arch-kirkwood/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index e5108f408ce..f1b63359075 100644
--- a/include/asm-arm/arch-kirkwood/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-kirkwood/memory.h
+ * arch/arm/mach-ep93xx/include/mach/memory.h
  */
 
 #ifndef __ASM_ARCH_MEMORY_H
@@ -7,8 +7,8 @@
 
 #define PHYS_OFFSET		UL(0x00000000)
 
-#define __virt_to_bus(x)	__virt_to_phys(x)
 #define __bus_to_virt(x)	__phys_to_virt(x)
+#define __virt_to_bus(x)	__virt_to_phys(x)
 
 
 #endif
diff --git a/include/asm-arm/arch-ep93xx/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 44eccec2cba..b5c182473f5 100644
--- a/include/asm-arm/arch-ep93xx/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/platform.h
+ * arch/arm/mach-ep93xx/include/mach/platform.h
  */
 
 #ifndef __ASSEMBLY__
diff --git a/include/asm-arm/arch-ep93xx/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index 79b71858674..67789d0f329 100644
--- a/include/asm-arm/arch-ep93xx/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -1,8 +1,8 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/system.h
+ * arch/arm/mach-ep93xx/include/mach/system.h
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h
new file mode 100644
index 00000000000..6b3503b01fa
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/timex.h
+ */
+
+#define CLOCK_TICK_RATE		983040
diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index a94f63ff053..30b318aa1a1 100644
--- a/include/asm-arm/arch-ep93xx/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/ts72xx.h
+ * arch/arm/mach-ep93xx/include/mach/ts72xx.h
  */
 
 /*
diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index c15274c85d5..1fd2f17de32 100644
--- a/include/asm-arm/arch-ep93xx/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/uncompress.h
+ * arch/arm/mach-ep93xx/include/mach/uncompress.h
  *
  * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
  *
@@ -9,7 +9,7 @@
  * your option) any later version.
  */
 
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 
 static unsigned char __raw_readb(unsigned int ptr)
 {
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..aed21cd3fe2
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f28c1294cae..de047a5c811 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -20,7 +20,7 @@
 #include <linux/mtd/physmap.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 3a4bf90ba83..c3cbff126d0 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -20,7 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/m48t86.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
index 35eb232a649..ae3e1c8c758 100644
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ b/arch/arm/mach-footbridge/cats-pci.c
@@ -18,6 +18,9 @@ static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
 
 static int __init cats_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	if (dev->irq >= 255)
+		return -1;	/* not a valid interrupt. */
+
 	if (dev->irq >= 128)
 		return dev->irq & 0x1f;
 
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
index 09c1fbc5187..4e10090cd87 100644
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ b/arch/arm/mach-footbridge/ebsa285-leds.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index b48cec4a0c4..4329b812357 100644
--- a/include/asm-arm/arch-ebsa285/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-ebsa285/debug-macro.S
+/* arch/arm/mach-footbridge/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-ebsa285/dma.h b/arch/arm/mach-footbridge/include/mach/dma.h
index 0259ad45d33..62afd213eff 100644
--- a/include/asm-arm/arch-ebsa285/dma.h
+++ b/arch/arm/mach-footbridge/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/dma.h
+ *  arch/arm/mach-footbridge/include/mach/dma.h
  *
  *  Architecture DMA routines
  *
diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
index e63064edb73..d3847be0c66 100644
--- a/include/asm-arm/arch-ebsa285/entry-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ebsa285/entry-macro.S
+ * arch/arm/mach-footbridge/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for footbridge-based platforms
  *
@@ -7,8 +7,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/hardware/dec21285.h>
 
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
index 74610c2c63d..ffaea90486f 100644
--- a/include/asm-arm/arch-ebsa285/hardware.h
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/hardware.h
+ *  arch/arm/mach-footbridge/include/mach/hardware.h
  *
  *  Copyright (C) 1998-1999 Russell King.
  *
@@ -12,7 +12,7 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 
 /*   Virtual      Physical	Size
  * 0xff800000	0x40000000	1MB	X-Bus
diff --git a/include/asm-arm/arch-ebsa285/io.h b/arch/arm/mach-footbridge/include/mach/io.h
index f9c72914186..a7b06623999 100644
--- a/include/asm-arm/arch-ebsa285/io.h
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/io.h
+ *  arch/arm/mach-footbridge/include/mach/io.h
  *
  *  Copyright (C) 1997-1999 Russell King
  *
@@ -14,7 +14,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffff
 
diff --git a/include/asm-arm/arch-ebsa285/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h
index 3e766f1cecf..400551e43e4 100644
--- a/include/asm-arm/arch-ebsa285/irqs.h
+++ b/arch/arm/mach-footbridge/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ebsa285/irqs.h
+ * arch/arm/mach-footbridge/include/mach/irqs.h
  *
  * Copyright (C) 1998 Russell King
  * Copyright (C) 1998 Phil Blundell
diff --git a/include/asm-arm/arch-ebsa285/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index 9019a3bf5ab..e9cae99dd1f 100644
--- a/include/asm-arm/arch-ebsa285/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/memory.h
+ *  arch/arm/mach-footbridge/include/mach/memory.h
  *
  *  Copyright (C) 1996-1999 Russell King.
  *
diff --git a/include/asm-arm/arch-ebsa285/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index bf91c695c4b..01c9f407f49 100644
--- a/include/asm-arm/arch-ebsa285/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/system.h
+ *  arch/arm/mach-footbridge/include/mach/system.h
  *
  *  Copyright (C) 1996-1999 Russell King.
  *
@@ -9,7 +9,7 @@
  */
 #include <asm/hardware/dec21285.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
diff --git a/include/asm-arm/arch-ebsa285/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h
index df60b3812d9..d0fea9d6d4a 100644
--- a/include/asm-arm/arch-ebsa285/timex.h
+++ b/arch/arm/mach-footbridge/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/timex.h
+ *  arch/arm/mach-footbridge/include/mach/timex.h
  *
  *  Copyright (C) 1998 Russell King
  *
diff --git a/include/asm-arm/arch-ebsa285/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h
index 86142c882b3..5dfa4428734 100644
--- a/include/asm-arm/arch-ebsa285/uncompress.h
+++ b/arch/arm/mach-footbridge/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/uncompress.h
+ *  arch/arm/mach-footbridge/include/mach/uncompress.h
  *
  *  Copyright (C) 1996-1999 Russell King
  *
diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
index e487d7e8c8a..d0958d860a3 100644
--- a/include/asm-arm/arch-ebsa285/vmalloc.h
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/vmalloc.h
+ *  arch/arm/mach-footbridge/include/mach/vmalloc.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 79443ffc891..7132e522c36 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -21,7 +21,7 @@
 
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/dec21285.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
index 8e9cac5a213..d91a4f4a32d 100644
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ b/arch/arm/mach-footbridge/netwinder-leds.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index d5cfcda385d..004819ea85c 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/time.h
+ *  arch/arm/mach-footbridge/include/mach/time.h
  *
  *  Copyright (C) 1998 Russell King.
  *  Copyright (C) 1998 Phil Blundell
@@ -23,7 +23,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/bcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/mach/time.h>
@@ -49,12 +49,12 @@ static unsigned long __init get_isa_cmos_time(void)
 	} while (sec != CMOS_READ(RTC_SECONDS));
 
 	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 	}
 	if ((year += 1900) < 1970)
 		year += 100;
@@ -76,7 +76,7 @@ static int set_isa_cmos_time(void)
 
 	cmos_minutes = CMOS_READ(RTC_MINUTES);
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
+		cmos_minutes = bcd2bin(cmos_minutes);
 
 	/*
 	 * since we're only adjusting minutes and seconds,
@@ -92,8 +92,8 @@ static int set_isa_cmos_time(void)
 
 	if (abs(real_minutes - cmos_minutes) < 30) {
 		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
 		}
 		CMOS_WRITE(real_seconds,RTC_SECONDS);
 		CMOS_WRITE(real_minutes,RTC_MINUTES);
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 45144ad2bed..b5f9741ae13 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -23,11 +23,11 @@
 #include <asm/pgtable.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/dma.h>
 
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index c2a431f482f..24df2a349a9 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include "common.h"
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index c627fa124eb..53e1f62f2e7 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <linux/device.h>
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 407cd4c0aa8..78be457dc32 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 MACHINE_START(H7201, "Hynix GMS30C7201")
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index bf2acdce62e..56161d55cf4 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 static struct resource cirrus_resources[] = {
diff --git a/include/asm-arm/arch-h720x/boards.h b/arch/arm/mach-h720x/include/mach/boards.h
index 8021f81f074..079b279e124 100644
--- a/include/asm-arm/arch-h720x/boards.h
+++ b/arch/arm/mach-h720x/include/mach/boards.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/boards.h
+ * arch/arm/mach-h720x/include/mach/boards.h
  *
  * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
  *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
diff --git a/include/asm-arm/arch-h720x/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 82822d36273..6294a1344dd 100644
--- a/include/asm-arm/arch-h720x/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-h720x/debug-macro.S
+/* arch/arm/mach-h720x/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-h720x/dma.h b/arch/arm/mach-h720x/include/mach/dma.h
index bfc6636679f..0a9d86ee84f 100644
--- a/include/asm-arm/arch-h720x/dma.h
+++ b/arch/arm/mach-h720x/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/dma.h
+ * arch/arm/mach-h720x/include/mach/dma.h
  *
  * Architecture DMA routes
  *
diff --git a/include/asm-arm/arch-h720x/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S
index 38dd63ae104..6d3b917c4a1 100644
--- a/include/asm-arm/arch-h720x/entry-macro.S
+++ b/arch/arm/mach-h720x/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-h720x/entry-macro.S
+ * arch/arm/mach-h720x/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for Hynix HMS720x based platforms
  *
diff --git a/include/asm-arm/arch-h720x/h7201-regs.h b/arch/arm/mach-h720x/include/mach/h7201-regs.h
index 49d4f6bd308..611b4947ccf 100644
--- a/include/asm-arm/arch-h720x/h7201-regs.h
+++ b/arch/arm/mach-h720x/include/mach/h7201-regs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/h7201-regs.h
+ * arch/arm/mach-h720x/include/mach/h7201-regs.h
  *
  * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
  *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
diff --git a/include/asm-arm/arch-h720x/h7202-regs.h b/arch/arm/mach-h720x/include/mach/h7202-regs.h
index 43d8ba8a601..17c12eb3499 100644
--- a/include/asm-arm/arch-h720x/h7202-regs.h
+++ b/arch/arm/mach-h720x/include/mach/h7202-regs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/h7202-regs.h
+ * arch/arm/mach-h720x/include/mach/h7202-regs.h
  *
  * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
  *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
diff --git a/include/asm-arm/arch-h720x/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h
index dfb778906a9..6c19156e2a4 100644
--- a/include/asm-arm/arch-h720x/hardware.h
+++ b/arch/arm/mach-h720x/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/hardware.h
+ * arch/arm/mach-h720x/include/mach/hardware.h
  *
  * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
  *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
diff --git a/include/asm-arm/arch-h720x/io.h b/arch/arm/mach-h720x/include/mach/io.h
index d3ccfd8172b..1dab74ce88c 100644
--- a/include/asm-arm/arch-h720x/io.h
+++ b/arch/arm/mach-h720x/include/mach/io.h
@@ -1,12 +1,12 @@
 /*
- * linux/include/asm-arm/arch-h720x/io.h
+ * arch/arm/mach-h720x/include/mach/io.h
  *
  * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
  *
  * Changelog:
  *
  *  09-19-2001	JJKIM
- *  		Created from linux/include/asm-arm/arch-l7200/io.h
+ *  		Created from arch/arm/mach-l7200/include/mach/io.h
  *
  *  03-27-2003  Robert Schwebel <r.schwebel@pengutronix.de>:
  *  		re-unified header files for h720x
@@ -14,7 +14,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-h720x/irqs.h b/arch/arm/mach-h720x/include/mach/irqs.h
index 8244413988b..430a92b492f 100644
--- a/include/asm-arm/arch-h720x/irqs.h
+++ b/arch/arm/mach-h720x/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/irqs.h
+ * arch/arm/mach-h720x/include/mach/irqs.h
  *
  * Copyright (C) 2000 Jungjun Kim
  *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
diff --git a/include/asm-arm/arch-h720x/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
index 53e923dba76..cb26f49cc4e 100644
--- a/include/asm-arm/arch-h720x/memory.h
+++ b/arch/arm/mach-h720x/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/memory.h
+ * arch/arm/mach-h720x/include/mach/memory.h
  *
  * Copyright (c) 2000 Jungjun Kim
  *
diff --git a/include/asm-arm/arch-h720x/system.h b/arch/arm/mach-h720x/include/mach/system.h
index 8dc1460b230..e4a7c760d52 100644
--- a/include/asm-arm/arch-h720x/system.h
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -1,18 +1,18 @@
 /*
- * linux/include/asm-arm/arch-h720x/system.h
+ * arch/arm/mach-h720x/include/mach/system.h
  *
  * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- * linux/include/asm-arm/arch-h720x/system.h
+ * arch/arm/mach-h720x/include/mach/system.h
  *
  */
 
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-h720x/timex.h b/arch/arm/mach-h720x/include/mach/timex.h
index 48a391c4080..3f2f447ff36 100644
--- a/include/asm-arm/arch-h720x/timex.h
+++ b/arch/arm/mach-h720x/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/timex.h
+ * arch/arm/mach-h720x/include/mach/timex.h
  * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/include/asm-arm/arch-h720x/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h
index 18c69e0f358..d6623234f61 100644
--- a/include/asm-arm/arch-h720x/uncompress.h
+++ b/arch/arm/mach-h720x/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/uncompress.h
+ * arch/arm/mach-h720x/include/mach/uncompress.h
  *
  * Copyright (C) 2001-2002 Jungjun Kim
  */
@@ -7,7 +7,7 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define LSR 	0x14
 #define TEMPTY 	0x40
diff --git a/include/asm-arm/arch-h720x/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
index b4693cb821e..ff1460d6841 100644
--- a/include/asm-arm/arch-h720x/vmalloc.h
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-h720x/vmalloc.h
+ * arch/arm/mach-h720x/include/mach/vmalloc.h
  */
 
 #ifndef __ARCH_ARM_VMALLOC_H
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
index 6a90fe5578d..4b4230db376 100644
--- a/arch/arm/mach-imx/clock.c
+++ b/arch/arm/mach-imx/clock.c
@@ -23,7 +23,7 @@
 #include <linux/err.h>
 
 #include <asm/io.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imx-regs.h>
 
 /*
  * Very simple approach: We can't disable clocks, so we do
@@ -172,24 +172,29 @@ found:
 
 	return clk;
 }
+EXPORT_SYMBOL(clk_get);
 
 void clk_put(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_put);
 
 int clk_enable(struct clk *clk)
 {
 	return 0;
 }
+EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->get_rate();
 }
+EXPORT_SYMBOL(clk_get_rate);
 
 int imx_clocks_init(void)
 {
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index be0809b33e0..434b4ca0af6 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -36,7 +36,7 @@
 #include <linux/err.h>
 #include <asm/system.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index ee1c6f06ff6..c10810c936b 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -30,9 +30,9 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
-#include <asm/arch/imx-dma.h>
+#include <mach/imx-dma.h>
 
 struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
 
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 98ddd8a6d05..fa72174dd95 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -29,13 +29,13 @@
 #include <linux/string.h>
 
 #include <asm/errno.h>
-#include <asm/arch/imxfb.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/imx-regs.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
 
@@ -251,7 +251,6 @@ void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
 {
 	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info));
 }
-EXPORT_SYMBOL(set_imx_fb_info);
 
 static struct resource imxfb_resources[] = {
 	[0] = {
diff --git a/include/asm-arm/arch-imx/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
index c611871643a..87802bbfe63 100644
--- a/include/asm-arm/arch-imx/debug-macro.S
+++ b/arch/arm/mach-imx/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-imx/debug-macro.S
+/* arch/arm/mach-imx/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-imx/dma.h b/arch/arm/mach-imx/include/mach/dma.h
index 621ff2c730f..621ff2c730f 100644
--- a/include/asm-arm/arch-imx/dma.h
+++ b/arch/arm/mach-imx/include/mach/dma.h
diff --git a/include/asm-arm/arch-imx/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
index 0b84e81031c..e4db679f776 100644
--- a/include/asm-arm/arch-imx/entry-macro.S
+++ b/arch/arm/mach-imx/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-imx/entry-macro.S
+ * arch/arm/mach-imx/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for iMX-based platforms
  *
@@ -7,7 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-imx/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
index 486023263f3..6e3d795f226 100644
--- a/include/asm-arm/arch-imx/gpio.h
+++ b/arch/arm/mach-imx/include/mach/gpio.h
@@ -1,6 +1,6 @@
 #ifndef _IMX_GPIO_H
 
-#include <asm/arch/imx-regs.h>
+#include <mach/imx-regs.h>
 
 #define IMX_GPIO_ALLOC_MODE_NORMAL	0
 #define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
diff --git a/include/asm-arm/arch-imx/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
index 6542ca5e8c3..c73e9e724c7 100644
--- a/include/asm-arm/arch-imx/hardware.h
+++ b/arch/arm/mach-imx/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-imx/hardware.h
+ *  arch/arm/mach-imx/include/mach/hardware.h
  *
  *  Copyright (C) 1999 ARM Limited.
  *
diff --git a/include/asm-arm/arch-imx/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
index 44d89c35539..44d89c35539 100644
--- a/include/asm-arm/arch-imx/imx-dma.h
+++ b/arch/arm/mach-imx/include/mach/imx-dma.h
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
index fb9de273387..fb9de273387 100644
--- a/include/asm-arm/arch-imx/imx-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx-regs.h
diff --git a/include/asm-arm/arch-imx/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
index d54eb1d4802..d54eb1d4802 100644
--- a/include/asm-arm/arch-imx/imx-uart.h
+++ b/arch/arm/mach-imx/include/mach/imx-uart.h
diff --git a/include/asm-arm/arch-imx/imxfb.h b/arch/arm/mach-imx/include/mach/imxfb.h
index 3ed9ec8b9f0..3ed9ec8b9f0 100644
--- a/include/asm-arm/arch-imx/imxfb.h
+++ b/arch/arm/mach-imx/include/mach/imxfb.h
diff --git a/include/asm-arm/arch-imx/io.h b/arch/arm/mach-imx/include/mach/io.h
index b191cdd0557..c50c5fa6fb8 100644
--- a/include/asm-arm/arch-imx/io.h
+++ b/arch/arm/mach-imx/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-imxads/io.h
+ *  arch/arm/mach-imxads/include/mach/io.h
  *
  *  Copyright (C) 1999 ARM Limited
  *
@@ -20,7 +20,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-imx/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
index f195542898e..eb8d5bd05d5 100644
--- a/include/asm-arm/arch-imx/irqs.h
+++ b/arch/arm/mach-imx/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-imxads/irqs.h
+ *  arch/arm/mach-imxads/include/mach/irqs.h
  *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
@@ -23,7 +23,7 @@
 #define __ARM_IRQS_H__
 
 /* Use the imx definitions */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  *  IMX Interrupt numbers
diff --git a/include/asm-arm/arch-imx/memory.h b/arch/arm/mach-imx/include/mach/memory.h
index 5ad90127915..5c453063c0e 100644
--- a/include/asm-arm/arch-imx/memory.h
+++ b/arch/arm/mach-imx/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-imx/memory.h
+ *  arch/arm/mach-imx/include/mach/memory.h
  *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
diff --git a/include/asm-arm/arch-imx/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
index 4712f354dcc..4712f354dcc 100644
--- a/include/asm-arm/arch-imx/mmc.h
+++ b/arch/arm/mach-imx/include/mach/mmc.h
diff --git a/include/asm-arm/arch-imx/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
index d90fa4b49ce..def05d510eb 100644
--- a/include/asm-arm/arch-imx/mx1ads.h
+++ b/arch/arm/mach-imx/include/mach/mx1ads.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-imx/mx1ads.h
+ * arch/arm/mach-imx/include/mach/mx1ads.h
  *
  * Copyright (C) 2004 Robert Schwebel, Pengutronix
  *
diff --git a/include/asm-arm/arch-imx/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
index 2165449e976..4186430feec 100644
--- a/include/asm-arm/arch-imx/spi_imx.h
+++ b/arch/arm/mach-imx/include/mach/spi_imx.h
@@ -1,11 +1,11 @@
 /*
- * include/asm-arm/arch-imx/spi_imx.h
+ * arch/arm/mach-imx/include/mach/spi_imx.h
  *
  * Copyright (C) 2006 SWAPP
  *	Andrea Paterniani <a.paterniani@swapp-eng.it>
  *
  * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/include/asm-arm/arch-pxa/pxa2xx_spi.h
+ *	linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/include/asm-arm/arch-imx/system.h b/arch/arm/mach-imx/include/mach/system.h
index c645fe9afb9..adee7e51bab 100644
--- a/include/asm-arm/arch-imx/system.h
+++ b/arch/arm/mach-imx/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-imxads/system.h
+ *  arch/arm/mach-imxads/include/mach/system.h
  *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
diff --git a/include/asm-arm/arch-imx/timex.h b/arch/arm/mach-imx/include/mach/timex.h
index e22ba789546..e22ba789546 100644
--- a/include/asm-arm/arch-imx/timex.h
+++ b/arch/arm/mach-imx/include/mach/timex.h
diff --git a/include/asm-arm/arch-imx/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
index da333f69136..70523e67a8f 100644
--- a/include/asm-arm/arch-imx/uncompress.h
+++ b/arch/arm/mach-imx/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-imxads/uncompress.h
+ *  arch/arm/mach-imxads/include/mach/uncompress.h
  *
  *
  *
diff --git a/include/asm-arm/arch-imx/vmalloc.h b/arch/arm/mach-imx/include/mach/vmalloc.h
index cb616912706..7d7cb0bde3e 100644
--- a/include/asm-arm/arch-imx/vmalloc.h
+++ b/arch/arm/mach-imx/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-imx/vmalloc.h
+ *  arch/arm/mach-imx/include/mach/vmalloc.h
  *
  *  Copyright (C) 2000 Russell King.
  *
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index e1b1f028b93..798f221eb3b 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -27,7 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
index 79236404aec..af81621f689 100644
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ b/arch/arm/mach-imx/leds-mx1ads.c
@@ -13,7 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index 9635d5812bc..87fa1ff43b0 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -25,8 +25,8 @@
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
 #include <linux/interrupt.h>
 #include "generic.h"
 
@@ -125,7 +125,7 @@ static struct platform_device *devices[] __initdata = {
 	&imx_uart2_device,
 };
 
-#ifdef CONFIG_MMC_IMX
+#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
 static int mx1ads_mmc_card_present(struct device *dev)
 {
 	/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
@@ -143,7 +143,7 @@ mx1ads_init(void)
 #ifdef CONFIG_LEDS
 	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
 #endif
-#ifdef CONFIG_MMC_IMX
+#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
 	/* SD/MMC card detect */
 	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
 	imx_set_mmc_info(&mx1ads_mmc_info);
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 5a41e96e858..08be3875c59 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -19,7 +19,7 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 7fbbc17f8e8..8bacf6d4d09 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -20,11 +20,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index 71c58bff304..7c49d55e6b2 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
  *
- *  $Id: cpu.c,v 1.6 2002/07/18 13:58:51 rmk Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -20,7 +18,7 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 5a1588cf824..3c8383dbe9e 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -23,8 +23,8 @@
 
 #include <asm/io.h>
 #include <asm/hardware/icst525.h>
-#include <asm/arch/lm.h>
-#include <asm/arch/impd1.h>
+#include <mach/lm.h>
+#include <mach/impd1.h>
 #include <asm/sizes.h>
 
 #include "clock.h"
@@ -405,7 +405,7 @@ static int impd1_probe(struct lm_device *dev)
 
 		ret = amba_device_register(d, &dev->resource);
 		if (ret) {
-			dev_err(&d->dev, "unable to register device: %d\n");
+			dev_err(&d->dev, "unable to register device: %d\n", ret);
 			kfree(d);
 		}
 	}
diff --git a/include/asm-arm/arch-integrator/bits.h b/arch/arm/mach-integrator/include/mach/bits.h
index 09b024e0496..09b024e0496 100644
--- a/include/asm-arm/arch-integrator/bits.h
+++ b/arch/arm/mach-integrator/include/mach/bits.h
diff --git a/include/asm-arm/arch-integrator/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
index 1ab353e2359..1ab353e2359 100644
--- a/include/asm-arm/arch-integrator/cm.h
+++ b/arch/arm/mach-integrator/include/mach/cm.h
diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index 85b327c352d..d347d659ea3 100644
--- a/include/asm-arm/arch-integrator/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-integrator/debug-macro.S
+/* arch/arm/mach-integrator/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-integrator/dma.h b/arch/arm/mach-integrator/include/mach/dma.h
index 83fd6bbaf9d..fbebe85a2db 100644
--- a/include/asm-arm/arch-integrator/dma.h
+++ b/arch/arm/mach-integrator/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-integrator/dma.h
+ *  arch/arm/mach-integrator/include/mach/dma.h
  *
  *  Copyright (C) 1997,1998 Russell King
  *
diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
index 491af1a23de..7649c57acb5 100644
--- a/include/asm-arm/arch-integrator/entry-macro.S
+++ b/arch/arm/mach-integrator/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-integrator/entry-macro.S
+ * arch/arm/mach-integrator/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for Integrator platforms
  *
@@ -7,8 +7,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
 
  		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-integrator/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 6f0947bc500..1251319ef9a 100644
--- a/include/asm-arm/arch-integrator/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-integrator/hardware.h
+ *  arch/arm/mach-integrator/include/mach/hardware.h
  *
  *  This file contains the hardware definitions of the Integrator.
  *
@@ -23,7 +23,7 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 /*
  * Where in virtual memory the IO devices (timers, system controllers
diff --git a/include/asm-arm/arch-integrator/impd1.h b/arch/arm/mach-integrator/include/mach/impd1.h
index d75de4b1423..d75de4b1423 100644
--- a/include/asm-arm/arch-integrator/impd1.h
+++ b/arch/arm/mach-integrator/include/mach/impd1.h
diff --git a/include/asm-arm/arch-integrator/io.h b/arch/arm/mach-integrator/include/mach/io.h
index c8f2175948b..f21bb5493dd 100644
--- a/include/asm-arm/arch-integrator/io.h
+++ b/arch/arm/mach-integrator/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-integrator/io.h
+ *  arch/arm/mach-integrator/include/mach/io.h
  *
  *  Copyright (C) 1999 ARM Limited
  *
diff --git a/include/asm-arm/arch-integrator/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
index ba7b3afee44..1fbe6d19022 100644
--- a/include/asm-arm/arch-integrator/irqs.h
+++ b/arch/arm/mach-integrator/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-integrator/irqs.h
+ *  arch/arm/mach-integrator/include/mach/irqs.h
  *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
diff --git a/include/asm-arm/arch-integrator/lm.h b/arch/arm/mach-integrator/include/mach/lm.h
index 28186b6f2c0..28186b6f2c0 100644
--- a/include/asm-arm/arch-integrator/lm.h
+++ b/arch/arm/mach-integrator/include/mach/lm.h
diff --git a/include/asm-arm/arch-integrator/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
index 1ab56d783e7..be7e63c21d2 100644
--- a/include/asm-arm/arch-integrator/memory.h
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-integrator/memory.h
+ *  arch/arm/mach-integrator/include/mach/memory.h
  *
  *  Copyright (C) 1999 ARM Limited
  *
diff --git a/include/asm-arm/arch-integrator/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
index 83c4c1ceb41..028b87839c0 100644
--- a/include/asm-arm/arch-integrator/platform.h
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -26,8 +26,6 @@
  * 	NOTE: This is a multi-hosted header file for use with uHAL and
  * 	      supported debuggers.
  *
- * 	$Id: platform.s,v 1.32 2000/02/18 10:51:39 asims Exp $
- *
  * ***********************************************************************/
 
 #ifndef __address_h
diff --git a/include/asm-arm/arch-integrator/system.h b/arch/arm/mach-integrator/include/mach/system.h
index 8ea442237d2..c485345c8c7 100644
--- a/include/asm-arm/arch-integrator/system.h
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-integrator/system.h
+ *  arch/arm/mach-integrator/include/mach/system.h
  *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-integrator/timex.h b/arch/arm/mach-integrator/include/mach/timex.h
index 87a762818ba..1dcb42028c8 100644
--- a/include/asm-arm/arch-integrator/timex.h
+++ b/arch/arm/mach-integrator/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-integrator/timex.h
+ *  arch/arm/mach-integrator/include/mach/timex.h
  *
  *  Integrator architecture timex specifications
  *
diff --git a/include/asm-arm/arch-integrator/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h
index f61825c4d90..30452f00a16 100644
--- a/include/asm-arm/arch-integrator/uncompress.h
+++ b/arch/arm/mach-integrator/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-integrator/uncompress.h
+ *  arch/arm/mach-integrator/include/mach/uncompress.h
  *
  *  Copyright (C) 1999 ARM Limited
  *
diff --git a/include/asm-arm/arch-integrator/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
index 170cccece52..e87ab0b37bd 100644
--- a/include/asm-arm/arch-integrator/vmalloc.h
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-integrator/vmalloc.h
+ *  arch/arm/mach-integrator/include/mach/vmalloc.h
  *
  *  Copyright (C) 2000 Russell King.
  *
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index df37e93c6fc..6e472b5f8f2 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -28,14 +28,14 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
 
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 913f64b2240..6b99e9c258b 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -20,15 +20,15 @@
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
 
-#include <asm/arch/cm.h>
-#include <asm/arch/lm.h>
+#include <mach/cm.h>
+#include <mach/lm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index f1436e683b4..7bc6881434e 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -25,12 +25,12 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 
 static int saved_leds;
 
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index f939c509140..f52c7af31ea 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -12,7 +12,7 @@
 #include <linux/device.h>
 #include <linux/slab.h>
 
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
 
 #define to_lm_device(d)	container_of(d, struct lm_device, dev)
 #define to_lm_driver(d)	container_of(d, struct lm_driver, drv)
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index c07f497000c..9f2b1ea8fb2 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -28,7 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/include/asm-arm/arch-iop13xx/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
index ef4f5da2029..60019c8e646 100644
--- a/include/asm-arm/arch-iop13xx/adma.h
+++ b/arch/arm/mach-iop13xx/include/mach/adma.h
@@ -19,7 +19,7 @@
 #define _ADMA_H
 #include <linux/types.h>
 #include <linux/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop_adma.h>
 
 #define ADMA_ACCR(chan)	(chan->mmr_base + 0x0)
diff --git a/include/asm-arm/arch-iop13xx/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index 788b4e386c1..9037d2e8557 100644
--- a/include/asm-arm/arch-iop13xx/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop13xx/debug-macro.S
+ * arch/arm/mach-iop13xx/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-iop13xx/dma.h b/arch/arm/mach-iop13xx/include/mach/dma.h
index d79846fbb39..d79846fbb39 100644
--- a/include/asm-arm/arch-iop13xx/dma.h
+++ b/arch/arm/mach-iop13xx/include/mach/dma.h
diff --git a/include/asm-arm/arch-iop13xx/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
index a624a7870c6..a624a7870c6 100644
--- a/include/asm-arm/arch-iop13xx/entry-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
diff --git a/include/asm-arm/arch-iop13xx/hardware.h b/arch/arm/mach-iop13xx/include/mach/hardware.h
index 8e1d5628984..8e1d5628984 100644
--- a/include/asm-arm/arch-iop13xx/hardware.h
+++ b/arch/arm/mach-iop13xx/include/mach/hardware.h
diff --git a/include/asm-arm/arch-iop13xx/io.h b/arch/arm/mach-iop13xx/include/mach/io.h
index a6e0f9e6ddc..a6e0f9e6ddc 100644
--- a/include/asm-arm/arch-iop13xx/io.h
+++ b/arch/arm/mach-iop13xx/include/mach/io.h
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
index 52b7fab7ef6..52b7fab7ef6 100644
--- a/include/asm-arm/arch-iop13xx/iop13xx.h
+++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/arch/arm/mach-iop13xx/include/mach/iq81340.h
index ba2cf931e9c..ba2cf931e9c 100644
--- a/include/asm-arm/arch-iop13xx/iq81340.h
+++ b/arch/arm/mach-iop13xx/include/mach/iq81340.h
diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h
index 054e7acb5bf..054e7acb5bf 100644
--- a/include/asm-arm/arch-iop13xx/irqs.h
+++ b/arch/arm/mach-iop13xx/include/mach/irqs.h
diff --git a/include/asm-arm/arch-iop13xx/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 031a0fa78ef..e8b59d8f1bb 100644
--- a/include/asm-arm/arch-iop13xx/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Physical DRAM offset.
diff --git a/include/asm-arm/arch-iop13xx/msi.h b/arch/arm/mach-iop13xx/include/mach/msi.h
index b80c5ae17e9..b80c5ae17e9 100644
--- a/include/asm-arm/arch-iop13xx/msi.h
+++ b/arch/arm/mach-iop13xx/include/mach/msi.h
diff --git a/include/asm-arm/arch-iop13xx/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 4041f30d4cd..17b5515af8b 100644
--- a/include/asm-arm/arch-iop13xx/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -1,6 +1,6 @@
 #ifndef _IOP13XX_PCI_H_
 #define _IOP13XX_PCI_H_
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 struct pci_sys_data;
diff --git a/include/asm-arm/arch-iop13xx/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
index 8575af8db78..c7127f416e1 100644
--- a/include/asm-arm/arch-iop13xx/system.h
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-iop13xx/system.h
+ * arch/arm/mach-iop13xx/include/mach/system.h
  *
  *  Copyright (C) 2004 Intel Corp.
  *
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <asm/arch/iop13xx.h>
+#include <mach/iop13xx.h>
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
diff --git a/include/asm-arm/arch-iop13xx/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
index 49213d9d7ca..49213d9d7ca 100644
--- a/include/asm-arm/arch-iop13xx/time.h
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
diff --git a/include/asm-arm/arch-iop13xx/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h
index f0c51dd97ed..5b1f1c8a827 100644
--- a/include/asm-arm/arch-iop13xx/timex.h
+++ b/arch/arm/mach-iop13xx/include/mach/timex.h
@@ -1,3 +1,3 @@
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h
index dd9c2934190..fa4f80522fa 100644
--- a/include/asm-arm/arch-iop13xx/uncompress.h
+++ b/arch/arm/mach-iop13xx/include/mach/uncompress.h
@@ -1,6 +1,6 @@
 #include <asm/types.h>
 #include <linux/serial_reg.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
 #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
diff --git a/include/asm-arm/arch-iop13xx/vmalloc.h b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
index c5345674034..c5345674034 100644
--- a/include/asm-arm/arch-iop13xx/vmalloc.h
+++ b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 5b22fdeca52..26cfa318142 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -18,7 +18,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 void * __iomem __iop13xx_io(unsigned long io_addr)
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 77b24cd1d88..5051c03d437 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -18,14 +18,14 @@
  */
 #include <linux/pci.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
 
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index e8522b3b816..bc443073a8e 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -18,14 +18,14 @@
  */
 #include <linux/pci.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 extern int init_atu;
 
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index 69f07b25b3c..0d099ca87bd 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -23,10 +23,9 @@
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/msi.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/msi.h>
 
 /* INTCTL0 CP6 R0 Page 4
  */
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 7825c1aaa27..673b0db2203 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -21,11 +21,11 @@
 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 
 #define IOP13XX_PCI_DEBUG 0
 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 246f6d47872..b17ccc8cb47 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/physmap.h>
 #endif
 #include <asm/mach/map.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/iop_adma.h>
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 4877597c875..3ad4696ade4 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
@@ -31,7 +31,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 static void __init em7210_timer_init(void)
 {
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index d4fca75ce54..45d61276d23 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -25,7 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -34,7 +34,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
 #include <asm/page.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * GLAN Tank timer tick configuration.
diff --git a/include/asm-arm/arch-iop32x/adma.h b/arch/arm/mach-iop32x/include/mach/adma.h
index 5ed92037dd1..5ed92037dd1 100644
--- a/include/asm-arm/arch-iop32x/adma.h
+++ b/arch/arm/mach-iop32x/include/mach/adma.h
diff --git a/include/asm-arm/arch-iop32x/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index 9022b6849e2..58b01664ffb 100644
--- a/include/asm-arm/arch-iop32x/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/debug-macro.S
+ * arch/arm/mach-iop32x/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-iop33x/dma.h b/arch/arm/mach-iop32x/include/mach/dma.h
index b7775fdc5ad..f8bd817f205 100644
--- a/include/asm-arm/arch-iop33x/dma.h
+++ b/arch/arm/mach-iop32x/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/dma.h
+ * arch/arm/mach-iop32x/include/mach/dma.h
  *
  * Copyright (C) 2004 Intel Corp.
  *
diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
index 207db99dfbd..b02fb56bafc 100644
--- a/include/asm-arm/arch-iop32x/entry-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/entry-macro.S
+ * arch/arm/mach-iop32x/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for IOP32x-based platforms
  *
@@ -7,7 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/arch/iop32x.h>
+#include <mach/iop32x.h>
 
 	.macro	disable_fiq
 	.endm
diff --git a/include/asm-arm/arch-iop32x/glantank.h b/arch/arm/mach-iop32x/include/mach/glantank.h
index bf0665acc1c..958eb91c091 100644
--- a/include/asm-arm/arch-iop32x/glantank.h
+++ b/arch/arm/mach-iop32x/include/mach/glantank.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/glantank.h
+ * arch/arm/mach-iop32x/include/mach/glantank.h
  *
  * IO-Data GLAN Tank board registers
  */
diff --git a/include/asm-arm/arch-iop32x/gpio.h b/arch/arm/mach-iop32x/include/mach/gpio.h
index 708f4ec9db1..708f4ec9db1 100644
--- a/include/asm-arm/arch-iop32x/gpio.h
+++ b/arch/arm/mach-iop32x/include/mach/gpio.h
diff --git a/include/asm-arm/arch-iop32x/hardware.h b/arch/arm/mach-iop32x/include/mach/hardware.h
index 6556ed5eee3..d559c4e6095 100644
--- a/include/asm-arm/arch-iop32x/hardware.h
+++ b/arch/arm/mach-iop32x/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/hardware.h
+ * arch/arm/mach-iop32x/include/mach/hardware.h
  */
 
 #ifndef __HARDWARE_H
diff --git a/include/asm-arm/arch-iop32x/io.h b/arch/arm/mach-iop32x/include/mach/io.h
index 958af751a48..ce54705ba3d 100644
--- a/include/asm-arm/arch-iop32x/io.h
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/io.h
+ * arch/arm/mach-iop32x/include/mach/io.h
  *
  * Copyright (C) 2001 MontaVista Software, Inc.
  *
@@ -11,7 +11,7 @@
 #ifndef __IO_H
 #define __IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
 	unsigned int mtype);
diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
index 0d8af57221a..abd9eb49f10 100644
--- a/include/asm-arm/arch-iop32x/iop32x.h
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/iop32x.h
+ * arch/arm/mach-iop32x/include/mach/iop32x.h
  *
  * Intel IOP32X Chip definitions
  *
diff --git a/include/asm-arm/arch-iop32x/iq31244.h b/arch/arm/mach-iop32x/include/mach/iq31244.h
index fff4eafa1f6..6b6b369e781 100644
--- a/include/asm-arm/arch-iop32x/iq31244.h
+++ b/arch/arm/mach-iop32x/include/mach/iq31244.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/iq31244.h
+ * arch/arm/mach-iop32x/include/mach/iq31244.h
  *
  * Intel IQ31244 evaluation board registers
  */
diff --git a/include/asm-arm/arch-iop32x/iq80321.h b/arch/arm/mach-iop32x/include/mach/iq80321.h
index eb69db9b9a0..498819b737e 100644
--- a/include/asm-arm/arch-iop32x/iq80321.h
+++ b/arch/arm/mach-iop32x/include/mach/iq80321.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/iq80321.h
+ * arch/arm/mach-iop32x/include/mach/iq80321.h
  *
  * Intel IQ80321 evaluation board registers
  */
diff --git a/include/asm-arm/arch-iop32x/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h
index bbaef873afc..33573e09914 100644
--- a/include/asm-arm/arch-iop32x/irqs.h
+++ b/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/irqs.h
+ * arch/arm/mach-iop32x/include/mach/irqs.h
  *
  * Author:	Rory Bolt <rorybolt@pacbell.net>
  * Copyright:	(C) 2002 Rory Bolt
diff --git a/include/asm-arm/arch-iop32x/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
index c51072af214..42cd4bf3148 100644
--- a/include/asm-arm/arch-iop32x/memory.h
+++ b/arch/arm/mach-iop32x/include/mach/memory.h
@@ -1,11 +1,11 @@
 /*
- * include/asm-arm/arch-iop32x/memory.h
+ * arch/arm/mach-iop32x/include/mach/memory.h
  */
 
 #ifndef __MEMORY_H
 #define __MEMORY_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Physical DRAM offset.
diff --git a/include/asm-arm/arch-iop32x/n2100.h b/arch/arm/mach-iop32x/include/mach/n2100.h
index 77a8af47662..40b8a532b06 100644
--- a/include/asm-arm/arch-iop32x/n2100.h
+++ b/arch/arm/mach-iop32x/include/mach/n2100.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/n2100.h
+ * arch/arm/mach-iop32x/include/mach/n2100.h
  *
  * Thecus N2100 board registers
  */
diff --git a/include/asm-arm/arch-iop32x/system.h b/arch/arm/mach-iop32x/include/mach/system.h
index 17b7eb7e9c0..20f923e54f4 100644
--- a/include/asm-arm/arch-iop32x/system.h
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/system.h
+ * arch/arm/mach-iop32x/include/mach/system.h
  *
  * Copyright (C) 2001 MontaVista Software, Inc.
  *
diff --git a/include/asm-arm/arch-iop32x/time.h b/arch/arm/mach-iop32x/include/mach/time.h
index 0f28c994962..0f28c994962 100644
--- a/include/asm-arm/arch-iop32x/time.h
+++ b/arch/arm/mach-iop32x/include/mach/time.h
diff --git a/include/asm-arm/arch-iop32x/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h
index 9934b087311..a541afced3c 100644
--- a/include/asm-arm/arch-iop32x/timex.h
+++ b/arch/arm/mach-iop32x/include/mach/timex.h
@@ -1,9 +1,9 @@
 /*
- * include/asm-arm/arch-iop32x/timex.h
+ * arch/arm/mach-iop32x/include/mach/timex.h
  *
  * IOP32x architecture timex specifications
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
index 070f15818fe..b247551b6f5 100644
--- a/include/asm-arm/arch-iop32x/uncompress.h
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -1,11 +1,11 @@
 /*
- * include/asm-arm/arch-iop32x/uncompress.h
+ * arch/arm/mach-iop32x/include/mach/uncompress.h
  */
 
 #include <asm/types.h>
 #include <asm/mach-types.h>
 #include <linux/serial_reg.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static volatile u8 *uart_base;
 
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
new file mode 100644
index 00000000000..85ceb09d85f
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 4a89823bceb..082818aaa20 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -26,7 +26,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -36,7 +36,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 1da3c911edd..d735539808b 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -23,7 +23,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -33,7 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80321 timer tick configuration.
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 55cf0162e8c..ba59b2d17db 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static u32 iop32x_mask;
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 28f164ea472..3173f9c5835 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,7 +30,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -40,7 +40,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * N2100 timer tick configuration.
diff --git a/include/asm-arm/arch-iop33x/adma.h b/arch/arm/mach-iop33x/include/mach/adma.h
index 4b92f795f90..4b92f795f90 100644
--- a/include/asm-arm/arch-iop33x/adma.h
+++ b/arch/arm/mach-iop33x/include/mach/adma.h
diff --git a/include/asm-arm/arch-iop33x/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index 9e7132ebe6a..a60c9ef05cc 100644
--- a/include/asm-arm/arch-iop33x/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/debug-macro.S
+ * arch/arm/mach-iop33x/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-iop32x/dma.h b/arch/arm/mach-iop33x/include/mach/dma.h
index e977a9ef316..d8b42232931 100644
--- a/include/asm-arm/arch-iop32x/dma.h
+++ b/arch/arm/mach-iop33x/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop32x/dma.h
+ * arch/arm/mach-iop33x/include/mach/dma.h
  *
  * Copyright (C) 2004 Intel Corp.
  *
diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S
index b8e3d449e88..4e1f7282b35 100644
--- a/include/asm-arm/arch-iop33x/entry-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/entry-macro.S
+ * arch/arm/mach-iop33x/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for IOP33x-based platforms
  *
@@ -7,7 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/arch/iop33x.h>
+#include <mach/iop33x.h>
 
 	.macro	disable_fiq
 	.endm
diff --git a/include/asm-arm/arch-iop33x/gpio.h b/arch/arm/mach-iop33x/include/mach/gpio.h
index ddd55bba9bb..ddd55bba9bb 100644
--- a/include/asm-arm/arch-iop33x/gpio.h
+++ b/arch/arm/mach-iop33x/include/mach/gpio.h
diff --git a/include/asm-arm/arch-iop33x/hardware.h b/arch/arm/mach-iop33x/include/mach/hardware.h
index 0659cf94d04..8c10e430655 100644
--- a/include/asm-arm/arch-iop33x/hardware.h
+++ b/arch/arm/mach-iop33x/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/hardware.h
+ * arch/arm/mach-iop33x/include/mach/hardware.h
  */
 
 #ifndef __HARDWARE_H
diff --git a/include/asm-arm/arch-iop33x/io.h b/arch/arm/mach-iop33x/include/mach/io.h
index fec9c53e2b1..15887463121 100644
--- a/include/asm-arm/arch-iop33x/io.h
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/io.h
+ * arch/arm/mach-iop33x/include/mach/io.h
  *
  * Copyright (C) 2001  MontaVista Software, Inc.
  *
@@ -11,7 +11,7 @@
 #ifndef __IO_H
 #define __IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
 	unsigned int mtype);
diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
index 766985b9a72..24567316ec8 100644
--- a/include/asm-arm/arch-iop33x/iop33x.h
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/iop33x.h
+ * arch/arm/mach-iop33x/include/mach/iop33x.h
  *
  * Intel IOP33X Chip definitions
  *
diff --git a/include/asm-arm/arch-iop33x/iq80331.h b/arch/arm/mach-iop33x/include/mach/iq80331.h
index 79b9302017e..fe406b0127f 100644
--- a/include/asm-arm/arch-iop33x/iq80331.h
+++ b/arch/arm/mach-iop33x/include/mach/iq80331.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/iq80331.h
+ * arch/arm/mach-iop33x/include/mach/iq80331.h
  *
  * Intel IQ80331 evaluation board registers
  */
diff --git a/include/asm-arm/arch-iop33x/iq80332.h b/arch/arm/mach-iop33x/include/mach/iq80332.h
index 05316562949..8325d71f2ed 100644
--- a/include/asm-arm/arch-iop33x/iq80332.h
+++ b/arch/arm/mach-iop33x/include/mach/iq80332.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/iq80332.h
+ * arch/arm/mach-iop33x/include/mach/iq80332.h
  *
  * Intel IQ80332 evaluation board registers
  */
diff --git a/include/asm-arm/arch-iop33x/irqs.h b/arch/arm/mach-iop33x/include/mach/irqs.h
index d045f840339..707628a600a 100644
--- a/include/asm-arm/arch-iop33x/irqs.h
+++ b/arch/arm/mach-iop33x/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/irqs.h
+ * arch/arm/mach-iop33x/include/mach/irqs.h
  *
  * Author:	Dave Jiang (dave.jiang@intel.com)
  * Copyright:	(C) 2003 Intel Corp.
diff --git a/include/asm-arm/arch-iop33x/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
index c8749127d6a..2cef0bbb354 100644
--- a/include/asm-arm/arch-iop33x/memory.h
+++ b/arch/arm/mach-iop33x/include/mach/memory.h
@@ -1,11 +1,11 @@
 /*
- * include/asm-arm/arch-iop33x/memory.h
+ * arch/arm/mach-iop33x/include/mach/memory.h
  */
 
 #ifndef __MEMORY_H
 #define __MEMORY_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Physical DRAM offset.
diff --git a/include/asm-arm/arch-iop33x/system.h b/arch/arm/mach-iop33x/include/mach/system.h
index 00dd07ece26..7bf3bfb4944 100644
--- a/include/asm-arm/arch-iop33x/system.h
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-iop33x/system.h
+ * arch/arm/mach-iop33x/include/mach/system.h
  *
  * Copyright (C) 2001 MontaVista Software, Inc.
  *
diff --git a/include/asm-arm/arch-iop33x/time.h b/arch/arm/mach-iop33x/include/mach/time.h
index 4ac4d7664f8..4ac4d7664f8 100644
--- a/include/asm-arm/arch-iop33x/time.h
+++ b/arch/arm/mach-iop33x/include/mach/time.h
diff --git a/include/asm-arm/arch-iop33x/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h
index fe3e1e369ff..c75760844d4 100644
--- a/include/asm-arm/arch-iop33x/timex.h
+++ b/arch/arm/mach-iop33x/include/mach/timex.h
@@ -1,9 +1,9 @@
 /*
- * include/asm-arm/arch-iop33x/timex.h
+ * arch/arm/mach-iop33x/include/mach/timex.h
  *
  * IOP3xx architecture timex specifications
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-iop33x/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
index e17fbc05877..b42423f6330 100644
--- a/include/asm-arm/arch-iop33x/uncompress.h
+++ b/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -1,11 +1,11 @@
 /*
- * include/asm-arm/arch-iop33x/uncompress.h
+ * arch/arm/mach-iop33x/include/mach/uncompress.h
  */
 
 #include <asm/types.h>
 #include <asm/mach-types.h>
 #include <linux/serial_reg.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static volatile u32 *uart_base;
 
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
new file mode 100644
index 00000000000..f9f99dea9bc
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index de39fd77857..c7d99f9fafe 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -22,7 +22,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80331 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 4904fd78445..af616c5f4fb 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -22,7 +22,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80332 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index f09dd054b9c..abb4ea2ed4f 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static u32 iop33x_mask0;
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
index ac297cd0276..8c21870fa80 100644
--- a/arch/arm/mach-iop33x/uart.c
+++ b/arch/arm/mach-iop33x/uart.c
@@ -24,9 +24,8 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #define IOP33X_UART_XTAL 33334000
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index daf28074134..a6a4f93085f 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -29,7 +29,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -39,7 +39,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 static DEFINE_SPINLOCK(ixp2000_slowport_lock);
 static unsigned long ixp2000_slowport_irq_flags;
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 9c49435d42c..c62ed655c1a 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -38,7 +38,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index bc8b3965479..904ff56d224 100644
--- a/include/asm-arm/arch-ixp2000/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-ixp2000/debug-macro.S
+/* arch/arm/mach-ixp2000/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-ixp2000/dma.h b/arch/arm/mach-ixp2000/include/mach/dma.h
index 548d8dc507e..26063d60f62 100644
--- a/include/asm-arm/arch-ixp2000/dma.h
+++ b/arch/arm/mach-ixp2000/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp2000/dma.h
+ * arch/arm/mach-ixp2000/include/mach/dma.h
  *
  * Copyright (C) 2002 Intel Corp.
  *
diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/arch/arm/mach-ixp2000/include/mach/enp2611.h
index 42f3c28dc5c..9ce3690061d 100644
--- a/include/asm-arm/arch-ixp2000/enp2611.h
+++ b/arch/arm/mach-ixp2000/include/mach/enp2611.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/enp2611.h
+ * arch/arm/mach-ixp2000/include/mach/enp2611.h
  *
  * Register and other defines for Radisys ENP-2611
  *
diff --git a/include/asm-arm/arch-ixp2000/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
index 11d512ad594..5850ffc8c75 100644
--- a/include/asm-arm/arch-ixp2000/entry-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/entry-macro.S
+ * arch/arm/mach-ixp2000/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for IXP2000-based platforms
  *
@@ -7,7 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 		.macro  disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio.h
index 03cbbe1fd9d..4a88d2c33da 100644
--- a/include/asm-arm/arch-ixp2000/gpio.h
+++ b/arch/arm/mach-ixp2000/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/gpio.h
+ * arch/arm/mach-ixp2000/include/mach/gpio.h
  *
  * Copyright (C) 2002 Intel Corporation.
  *
diff --git a/include/asm-arm/arch-ixp2000/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h
index e7ea781c48a..f033de4e749 100644
--- a/include/asm-arm/arch-ixp2000/hardware.h
+++ b/arch/arm/mach-ixp2000/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp2000/hardware.h
+ * arch/arm/mach-ixp2000/include/mach/hardware.h
  *
  * Hardware definitions for IXP2400/2800 based systems
  *
diff --git a/include/asm-arm/arch-ixp2000/io.h b/arch/arm/mach-ixp2000/include/mach/io.h
index c0ff2c6c66e..859e584914d 100644
--- a/include/asm-arm/arch-ixp2000/io.h
+++ b/arch/arm/mach-ixp2000/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp2000/io.h
+ * arch/arm/mach-ixp2000/include/mach/io.h
  *
  * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
  * Maintainer: Deepak Saxena <dsaxena@plexity.net>
@@ -15,7 +15,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT		0xffffffff
 #define __mem_pci(a)		(a)
diff --git a/include/asm-arm/arch-ixp2000/irqs.h b/arch/arm/mach-ixp2000/include/mach/irqs.h
index 62f09c7ff42..bee96bcafdc 100644
--- a/include/asm-arm/arch-ixp2000/irqs.h
+++ b/arch/arm/mach-ixp2000/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp2000/irqs.h
+ * arch/arm/mach-ixp2000/include/mach/irqs.h
  *
  * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
  * Maintainer: Deepak Saxena <dsaxena@plexity.net>
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
index 546e2e8e27b..5df8479d948 100644
--- a/include/asm-arm/arch-ixp2000/ixdp2x00.h
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/ixdp2x00.h
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
  *
  * Register and other defines for IXDP2[48]00 platforms
  *
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
index c6d51426e98..4c1f04083e5 100644
--- a/include/asm-arm/arch-ixp2000/ixdp2x01.h
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/ixdp2x01.h
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
  *
  * Platform definitions for IXDP2X01 && IXDP2801 systems
  *
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
index ccae4bec92c..19d80379a3e 100644
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/ixp2000-regs.h
+ * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
  *
  * Chipset register definitions for IXP2400/2800 based systems.
  *
diff --git a/include/asm-arm/arch-ixp2000/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h
index 21e1de51e3f..241529a7c52 100644
--- a/include/asm-arm/arch-ixp2000/memory.h
+++ b/arch/arm/mach-ixp2000/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp2000/memory.h
+ * arch/arm/mach-ixp2000/include/mach/memory.h
  *
  * Copyright (c) 2002 Intel Corp.
  * Copyright (c) 2003-2004 MontaVista Software, Inc.
@@ -22,7 +22,7 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *		to an address that the kernel can use.
  */
-#include <asm/arch/ixp2000-regs.h>
+#include <mach/ixp2000-regs.h>
 
 #define __virt_to_bus(v) \
 	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h
index a66317ab207..42182c79ed9 100644
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ b/arch/arm/mach-ixp2000/include/mach/platform.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/platform.h
+ * arch/arm/mach-ixp2000/include/mach/platform.h
  *
  * Various bits of code used by platform-level code.
  *
diff --git a/include/asm-arm/arch-ixp2000/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
index 3cc9a04f68c..2e9c68f95a2 100644
--- a/include/asm-arm/arch-ixp2000/system.h
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp2000/system.h
+ * arch/arm/mach-ixp2000/include/mach/system.h
  *
  * Copyright (C) 2002 Intel Corp.
  * Copyricht (C) 2003-2005 MontaVista Software, Inc.
@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static inline void arch_idle(void)
diff --git a/include/asm-arm/arch-ixp2000/timex.h b/arch/arm/mach-ixp2000/include/mach/timex.h
index b78a183d469..835e659f93d 100644
--- a/include/asm-arm/arch-ixp2000/timex.h
+++ b/arch/arm/mach-ixp2000/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp2000/timex.h
+ * arch/arm/mach-ixp2000/include/mach/timex.h
  *
  * IXP2000 architecture timex specifications
  */
diff --git a/include/asm-arm/arch-ixp2000/uncompress.h b/arch/arm/mach-ixp2000/include/mach/uncompress.h
index f66b408f363..ce363087df7 100644
--- a/include/asm-arm/arch-ixp2000/uncompress.h
+++ b/arch/arm/mach-ixp2000/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp2000/uncompress.h
+ * arch/arm/mach-ixp2000/include/mach/uncompress.h
  *
  *
  * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
diff --git a/include/asm-arm/arch-ixp2000/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
index 275136963a0..d195e35aed3 100644
--- a/include/asm-arm/arch-ixp2000/vmalloc.h
+++ b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp2000/vmalloc.h
+ * arch/arm/mach-ixp2000/include/mach/vmalloc.h
  *
  * Author: Naeem Afzal <naeem.m.afzal@intel.com>
  *
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index ce7c15c7300..c673b9ef9f6 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 14f09b80ab7..6715b50829a 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 73c651e83d9..5a781fd9757 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
@@ -41,7 +41,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/arch.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 
 /*************************************************************************
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index d3d730d2fc2..78a2341dee2 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -36,7 +36,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 03f4cf7f9de..03d916fbe53 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index df16a4eac49..68b4ac5b248 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -32,8 +32,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index d3a779a7a35..1c06bfc5a7e 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -29,7 +29,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/include/asm-arm/arch-ixp23xx/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index 2b25e640247..905db318872 100644
--- a/include/asm-arm/arch-ixp23xx/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/debug-macro.S
+ * arch/arm/mach-ixp23xx/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
@@ -10,7 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <asm/arch/ixp23xx.h>
+#include <mach/ixp23xx.h>
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
diff --git a/arch/arm/mach-ixp23xx/include/mach/dma.h b/arch/arm/mach-ixp23xx/include/mach/dma.h
new file mode 100644
index 00000000000..8886544b93f
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/dma.h
+ */
diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
index ec9dd6fc2d0..3f5338a7bbd 100644
--- a/include/asm-arm/arch-ixp23xx/entry-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/entry-macro.S
+ * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
  */
 
 		.macro	disable_fiq
diff --git a/include/asm-arm/arch-ixp23xx/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h
index c0010d21a68..c3192009a88 100644
--- a/include/asm-arm/arch-ixp23xx/hardware.h
+++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/hardware.h
+ * arch/arm/mach-ixp23xx/include/mach/hardware.h
  *
  * Copyright (C) 2002-2004 Intel Corporation.
  * Copyricht (C) 2005 MontaVista Software, Inc.
diff --git a/include/asm-arm/arch-ixp23xx/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
index 66f5bafc315..305ea1808c7 100644
--- a/include/asm-arm/arch-ixp23xx/io.h
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/io.h
+ * arch/arm/mach-ixp23xx/include/mach/io.h
  *
  * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
  * Maintainer: Deepak Saxena <dsaxena@plexity.net>
diff --git a/include/asm-arm/arch-ixp23xx/irqs.h b/arch/arm/mach-ixp23xx/include/mach/irqs.h
index 27c58089895..3af33a04b8a 100644
--- a/include/asm-arm/arch-ixp23xx/irqs.h
+++ b/arch/arm/mach-ixp23xx/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/irqs.h
+ * arch/arm/mach-ixp23xx/include/mach/irqs.h
  *
  * IRQ definitions for IXP23XX based systems
  *
diff --git a/include/asm-arm/arch-ixp23xx/ixdp2351.h b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
index d5e8a43d7bb..663951027de 100644
--- a/include/asm-arm/arch-ixp23xx/ixdp2351.h
+++ b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/ixdp2351.h
+ * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
  *
  * Register and other defines for IXDP2351
  *
diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
index 3927b1d61b1..6d02481b1d6 100644
--- a/include/asm-arm/arch-ixp23xx/ixp23xx.h
+++ b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/ixp23xx.h
+ * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
  *
  * Register definitions for IXP23XX
  *
diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
index 6d859d742d7..9d40115f7eb 100644
--- a/include/asm-arm/arch-ixp23xx/memory.h
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/memory.h
+ * arch/arm/mach-ixp23xx/include/mach/memory.h
  *
  * Copyright (c) 2003-2004 Intel Corp.
  *
@@ -12,7 +12,7 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Physical DRAM offset.
@@ -28,7 +28,6 @@
  *		to an address that the kernel can use.
  */
 #ifndef __ASSEMBLY__
-#include <asm/mach-types.h>
 
 #define __virt_to_bus(v)						\
 	({ unsigned int ret;						\
diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h
index db8aa304c93..db9d9416e5e 100644
--- a/include/asm-arm/arch-ixp23xx/platform.h
+++ b/arch/arm/mach-ixp23xx/include/mach/platform.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/platform.h
+ * arch/arm/mach-ixp23xx/include/mach/platform.h
  *
  * Various bits of code used by platform-level code.
  *
diff --git a/include/asm-arm/arch-ixp23xx/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
index 925e6b0c338..d57c3fc10f1 100644
--- a/include/asm-arm/arch-ixp23xx/system.h
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/system.h
+ * arch/arm/mach-ixp23xx/include/mach/system.h
  *
  * Copyright (C) 2003 Intel Corporation.
  *
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static inline void arch_idle(void)
diff --git a/arch/arm/mach-ixp23xx/include/mach/time.h b/arch/arm/mach-ixp23xx/include/mach/time.h
new file mode 100644
index 00000000000..b61dafc884a
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/time.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/time.h
+ */
diff --git a/include/asm-arm/arch-ixp23xx/timex.h b/arch/arm/mach-ixp23xx/include/mach/timex.h
index 516f72fe608..e341e9cf9c3 100644
--- a/include/asm-arm/arch-ixp23xx/timex.h
+++ b/arch/arm/mach-ixp23xx/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/timex.h
+ * arch/arm/mach-ixp23xx/include/mach/timex.h
  *
  * XScale architecture timex specifications
  */
diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
index 16c1110f230..8b4c358d2c0 100644
--- a/include/asm-arm/arch-ixp23xx/uncompress.h
+++ b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/uncompress.h
+ * arch/arm/mach-ixp23xx/include/mach/uncompress.h
  *
  * Copyright (C) 2002-2004 Intel Corporation.
  *
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H
 
-#include <asm/arch/ixp23xx.h>
+#include <mach/ixp23xx.h>
 #include <linux/serial_reg.h>
 
 #define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
diff --git a/include/asm-arm/arch-ixp23xx/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
index 9f256665854..dd519f678d1 100644
--- a/include/asm-arm/arch-ixp23xx/vmalloc.h
+++ b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp23xx/vmalloc.h
+ * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
  *
  * Copyright (c) 2005 MontaVista Software, Inc.
  *
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index 5c5d4d66dee..b6e0bfa44df 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -34,7 +34,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 227f808dc0e..701d60aa0ef 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -31,8 +31,7 @@
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 extern int (*external_fault) (unsigned long, struct pt_regs *);
 
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 896ff9f840d..6d38d769761 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -33,7 +33,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index c6e044befcc..08d65dcdb5f 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -25,7 +25,7 @@
 
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 void __init avila_pci_preinit(void)
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index e38f45fa58a..797995ce18b 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 64be341109b..192538a0457 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -32,7 +32,7 @@
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 /*
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3947c506b4f..58bd2842a6f 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -29,8 +29,8 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch/udc.h>
-#include <asm/hardware.h>
+#include <mach/udc.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index be4f4a208b9..efddf01ed17 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -20,7 +20,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 13f8a7ac3ba..aab1954e274 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -19,7 +19,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 0db3a909ae6..501dfdcc39f 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -64,7 +64,7 @@ static struct platform_device fsg_i2c_gpio = {
 
 static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
 	{
-		I2C_BOARD_INFO("rtc-isl1208", 0x6f),
+		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };
 
@@ -179,7 +179,6 @@ static void __init fsg_init(void)
 {
 	DECLARE_MAC_BUF(mac_buf);
 	uint8_t __iomem *f;
-	int i;
 
 	ixp4xx_sys_init();
 
@@ -228,6 +227,7 @@ static void __init fsg_init(void)
 	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
 	if (f) {
 #ifdef __ARMEB__
+		int i;
 		for (i = 0; i < 6; i++) {
 			fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
 			fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index afd1dc14e59..7e93a0975c4 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -23,7 +23,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 37876832e14..59b73a0ddfa 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -22,7 +22,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 20960704183..7b8a2c32384 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -28,8 +28,8 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/hardware.h>
+#include <mach/gtwx5715.h>
 #include <asm/mach/pci.h>
 
 /*
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index dc6725bda3c..25c21d6665e 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -32,12 +32,12 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/gtwx5715.h>
 
 /*
  * Xscale UART registers are 32 bits wide with only the least
diff --git a/include/asm-arm/arch-ixp4xx/avila.h b/arch/arm/mach-ixp4xx/include/mach/avila.h
index 0dfea0ccd6b..1640cb61972 100644
--- a/include/asm-arm/arch-ixp4xx/avila.h
+++ b/arch/arm/mach-ixp4xx/include/mach/avila.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/avila.h
+ * arch/arm/mach-ixp4xx/include/mach/avila.h
  *
  * Gateworks Avila platform specific definitions
  *
@@ -16,7 +16,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define	AVILA_SDA_PIN		7
diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/arch/arm/mach-ixp4xx/include/mach/coyote.h
index 7ac9ba2c035..717ac6d16f5 100644
--- a/include/asm-arm/arch-ixp4xx/coyote.h
+++ b/arch/arm/mach-ixp4xx/include/mach/coyote.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/coyote.h
+ * arch/arm/mach-ixp4xx/include/mach/coyote.h
  *
  * ADI Engineering platform specific definitions
  *
@@ -13,7 +13,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 /* PCI controller GPIO to IRQ pin mappings */
diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index 2fa3d6b8dbb..ff8aa2393bf 100644
--- a/include/asm-arm/arch-ixp4xx/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/cpu.h
+ * arch/arm/mach-ixp4xx/include/mach/cpu.h
  *
  * IXP4XX cpu type detection
  *
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 37bc8ef23e6..7c6a6912acd 100644
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-ixp4xx/debug-macro.S
+/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/arch/arm/mach-ixp4xx/include/mach/dma.h
index 2c7f5327d80..00c5070c020 100644
--- a/include/asm-arm/arch-ixp4xx/dma.h
+++ b/arch/arm/mach-ixp4xx/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/dma.h
+ * arch/arm/mach-ixp4xx/include/mach/dma.h
  *
  * Copyright (C) 2001-2004 MontaVista Software, Inc.
  *
@@ -14,7 +14,7 @@
 #include <linux/device.h>
 #include <asm/page.h>
 #include <asm/sizes.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
 
diff --git a/include/asm-arm/arch-ixp4xx/dsmg600.h b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
index b7673e171ab..dc087a34a26 100644
--- a/include/asm-arm/arch-ixp4xx/dsmg600.h
+++ b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
@@ -13,7 +13,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define DSMG600_SDA_PIN		5
diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
index f144a005ed9..f2e14e94ed1 100644
--- a/include/asm-arm/arch-ixp4xx/entry-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/entry-macro.S
+ * arch/arm/mach-ixp4xx/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for IXP4xx-based platforms
  *
@@ -7,7 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/arch/arm/mach-ixp4xx/include/mach/fsg.h
index c0100cc7981..1f02b7e22a1 100644
--- a/include/asm-arm/arch-ixp4xx/fsg.h
+++ b/arch/arm/mach-ixp4xx/include/mach/fsg.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/fsg.h
+ * arch/arm/mach-ixp4xx/include/mach/fsg.h
  *
  * Freecom FSG-3 platform specific definitions
  *
@@ -16,7 +16,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define FSG_SDA_PIN		12
diff --git a/include/asm-arm/arch-ixp4xx/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
index 3a4c5b8ae9e..9fbde177920 100644
--- a/include/asm-arm/arch-ixp4xx/gpio.h
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp4xx/gpio.h
+ * arch/arm/mach-ixp4xx/include/mach/gpio.h
  *
  * IXP4XX GPIO wrappers for arch-neutral GPIO calls
  *
@@ -25,7 +25,7 @@
 #ifndef __ASM_ARCH_IXP4XX_GPIO_H
 #define __ASM_ARCH_IXP4XX_GPIO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static inline int gpio_request(unsigned gpio, const char *label)
 {
diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
index c3069d67c00..5d5e201cac7 100644
--- a/include/asm-arm/arch-ixp4xx/gtwx5715.h
+++ b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/gtwx5715.h
+ * arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
  *
  * Gemtek GTWX5715 Gateway (Linksys WRV54G)
  *
@@ -21,7 +21,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 #include "irqs.h"
 
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index fa723a62785..f58a43a2396 100644
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/hardware.h 
+ * arch/arm/mach-ixp4xx/include/mach/hardware.h 
  *
  * Copyright (C) 2002 Intel Corporation.
  * Copyright (C) 2003-2004 MontaVista Software, Inc.
@@ -31,7 +31,7 @@
 #include "ixp4xx-regs.h"
 
 #ifndef __ASSEMBLER__
-#include <asm/arch/cpu.h>
+#include <mach/cpu.h>
 #endif
 
 /* Platform helper functions and definitions */
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index de181ce958d..319948e31be 100644
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp4xx/io.h
+ * arch/arm/mach-ixp4xx/include/mach/io.h
  *
  * Author: Deepak Saxena <dsaxena@plexity.net>
  *
@@ -15,7 +15,7 @@
 
 #include <linux/bitops.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffff0000
 
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h
index 674af4a8414..f4d74de1566 100644
--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/irqs.h 
+ * arch/arm/mach-ixp4xx/include/mach/irqs.h 
  *
  * IRQ definitions for IXP4XX based systems
  *
diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
index e0791af3bfe..2cafe65ebfe 100644
--- a/include/asm-arm/arch-ixp4xx/ixdp425.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/ixdp425.h
+ * arch/arm/mach-ixp4xx/include/mach/ixdp425.h
  *
  * IXDP425 platform specific definitions
  *
@@ -13,7 +13,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define	IXDP425_SDA_PIN		7
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index 68aca8554f5..ad9c888dd85 100644
--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+ * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
  *
  * Register definitions for IXP4xx chipset. This file contains 
  * register location and bit definitions only. Platform specific 
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
index af9667b57ab..c4d2830ac98 100644
--- a/include/asm-arm/arch-ixp4xx/memory.h
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp4xx/memory.h
+ * arch/arm/mach-ixp4xx/include/mach/memory.h
  *
  * Copyright (c) 2001-2004 MontaVista Software, Inc.
  */
diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
index 98d937897bc..3771d62a974 100644
--- a/include/asm-arm/arch-ixp4xx/nas100d.h
+++ b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/nas100d.h
+ * arch/arm/mach-ixp4xx/include/mach/nas100d.h
  *
  * NAS100D platform specific definitions
  *
@@ -16,7 +16,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define NAS100D_SDA_PIN		5
diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h
index 37d0511689d..37d0511689d 100644
--- a/include/asm-arm/arch-ixp4xx/npe.h
+++ b/arch/arm/mach-ixp4xx/include/mach/npe.h
diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
index 714bbc65126..85d00adbfb9 100644
--- a/include/asm-arm/arch-ixp4xx/nslu2.h
+++ b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/nslu2.h
+ * arch/arm/mach-ixp4xx/include/mach/nslu2.h
  *
  * NSLU2 platform specific definitions
  *
@@ -15,7 +15,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define NSLU2_SDA_PIN		7
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index a1f2b5404db..e824c02c825 100644
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/platform.h
+ * arch/arm/mach-ixp4xx/include/mach/platform.h
  *
  * Constants and functions that are useful to IXP4xx platform-specific code
  * and device drivers.
@@ -8,7 +8,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #ifndef __ASSEMBLY__
diff --git a/include/asm-arm/arch-ixp4xx/prpmc1100.h b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
index e2532ab7f48..17274a2e3de 100644
--- a/include/asm-arm/arch-ixp4xx/prpmc1100.h
+++ b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/prpmc1100.h
+ * arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
  *
  * Motorolla PrPMC1100 platform specific definitions
  *
@@ -13,7 +13,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
+#error "Do not include this directly, instead #include <mach/hardware.h>"
 #endif
 
 #define	PRPMC1100_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 1e52b95cede..1e52b95cede 100644
--- a/include/asm-arm/arch-ixp4xx/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
diff --git a/include/asm-arm/arch-ixp4xx/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index 8e1db423b1c..92a7e8ddf69 100644
--- a/include/asm-arm/arch-ixp4xx/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/system.h
+ * arch/arm/mach-ixp4xx/include/mach/system.h
  *
  * Copyright (C) 2002 Intel Corporation.
  *
@@ -9,7 +9,7 @@
  *
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
index 3745e35cc03..89ce3ee8469 100644
--- a/include/asm-arm/arch-ixp4xx/timex.h
+++ b/arch/arm/mach-ixp4xx/include/mach/timex.h
@@ -1,9 +1,9 @@
 /*
- * linux/include/asm-arm/arch-ixp4xx/timex.h
+ * arch/arm/mach-ixp4xx/include/mach/timex.h
  * 
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * We use IXP425 General purpose timer for our timer needs, it runs at 
diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
index dbdec36ff0d..80d6da2eafa 100644
--- a/include/asm-arm/arch-ixp4xx/udc.h
+++ b/arch/arm/mach-ixp4xx/include/mach/udc.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp4xx/udc.h
+ * arch/arm/mach-ixp4xx/include/mach/udc.h
  *
  */
 #include <asm/mach/udc_pxa2xx.h>
diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index 34ef48fe327..2db0078a8cf 100644
--- a/include/asm-arm/arch-ixp4xx/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp4xx/uncompress.h 
+ * arch/arm/mach-ixp4xx/include/mach/uncompress.h 
  *
  * Copyright (C) 2002 Intel Corporation.
  * Copyright (C) 2003-2004 MontaVista Software, Inc.
diff --git a/include/asm-arm/arch-ixp4xx/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
index 050d46e6b12..7b3580b53ad 100644
--- a/include/asm-arm/arch-ixp4xx/vmalloc.h
+++ b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ixp4xx/vmalloc.h
+ * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
  */
 #define VMALLOC_END       (0xFF000000)
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 7d9bb4d2310..64c29aacaac 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -22,7 +22,7 @@
 
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 void __init ixdp425_pci_preinit(void)
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 44584afb34a..9b2d2ec14c8 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -24,7 +24,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index 37d9f2e8f60..4ed7ac61492 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -19,7 +19,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 63a23fa4aab..c73a94d0ca2 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/arch/npe.h>
+#include <mach/npe.h>
 
 #define DEBUG_MSG			0
 #define DEBUG_FW			0
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index fab94eaecee..c6cb069a5a8 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -12,7 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/arch/qmgr.h>
+#include <mach/qmgr.h>
 
 #define DEBUG		0
 
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index 0f00feab67f..9b59ed03b15 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -23,7 +23,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index f7e09ad804e..7ea782021d1 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index a39f0f3c473..c79f492072f 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 5938a3b33cd..189f16f3619 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -15,15 +15,17 @@
 #include <linux/mbus.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
 #include <asm/page.h>
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/kirkwood.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/kirkwood.h>
+#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
+#include <plat/mv_xor.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -196,6 +198,37 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 
 
 /*****************************************************************************
+ * SPI
+ ****************************************************************************/
+static struct orion_spi_info kirkwood_spi_plat_data = {
+	.tclk		= KIRKWOOD_TCLK,
+};
+
+static struct resource kirkwood_spi_resources[] = {
+	{
+		.start	= SPI_PHYS_BASE,
+		.end	= SPI_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_spi = {
+	.name		= "orion_spi",
+	.id		= 0,
+	.resource	= kirkwood_spi_resources,
+	.dev		= {
+		.platform_data	= &kirkwood_spi_plat_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_spi_resources),
+};
+
+void __init kirkwood_spi_init()
+{
+	platform_device_register(&kirkwood_spi);
+}
+
+
+/*****************************************************************************
  * UART0
  ****************************************************************************/
 static struct plat_serial8250_port kirkwood_uart0_data[] = {
@@ -284,6 +317,212 @@ void __init kirkwood_uart1_init(void)
 
 
 /*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
+	.dram		= &kirkwood_mbus_dram_info,
+};
+
+static u64 kirkwood_xor_dmamask = DMA_32BIT_MASK;
+
+
+/*****************************************************************************
+ * XOR0
+ ****************************************************************************/
+static struct resource kirkwood_xor0_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= XOR0_PHYS_BASE,
+		.end	= XOR0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= XOR0_HIGH_PHYS_BASE,
+		.end	= XOR0_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_xor0_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data = &kirkwood_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_xor0_shared_resources),
+	.resource	= kirkwood_xor0_shared_resources,
+};
+
+static struct resource kirkwood_xor00_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_00,
+		.end	= IRQ_KIRKWOOD_XOR_00,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor00_data = {
+	.shared		= &kirkwood_xor0_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor00_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor00_resources),
+	.resource	= kirkwood_xor00_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor00_data,
+	},
+};
+
+static struct resource kirkwood_xor01_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_01,
+		.end	= IRQ_KIRKWOOD_XOR_01,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor01_data = {
+	.shared		= &kirkwood_xor0_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor01_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor01_resources),
+	.resource	= kirkwood_xor01_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor01_data,
+	},
+};
+
+void __init kirkwood_xor0_init(void)
+{
+	platform_device_register(&kirkwood_xor0_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor00_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor00_data.cap_mask);
+	platform_device_register(&kirkwood_xor00_channel);
+
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor01_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, kirkwood_xor01_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor01_data.cap_mask);
+	platform_device_register(&kirkwood_xor01_channel);
+}
+
+
+/*****************************************************************************
+ * XOR1
+ ****************************************************************************/
+static struct resource kirkwood_xor1_shared_resources[] = {
+	{
+		.name	= "xor 1 low",
+		.start	= XOR1_PHYS_BASE,
+		.end	= XOR1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 1 high",
+		.start	= XOR1_HIGH_PHYS_BASE,
+		.end	= XOR1_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_xor1_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data = &kirkwood_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_xor1_shared_resources),
+	.resource	= kirkwood_xor1_shared_resources,
+};
+
+static struct resource kirkwood_xor10_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_10,
+		.end	= IRQ_KIRKWOOD_XOR_10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor10_data = {
+	.shared		= &kirkwood_xor1_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor10_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor10_resources),
+	.resource	= kirkwood_xor10_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor10_data,
+	},
+};
+
+static struct resource kirkwood_xor11_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_11,
+		.end	= IRQ_KIRKWOOD_XOR_11,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor11_data = {
+	.shared		= &kirkwood_xor1_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor11_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor11_resources),
+	.resource	= kirkwood_xor11_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor11_data,
+	},
+};
+
+void __init kirkwood_xor1_init(void)
+{
+	platform_device_register(&kirkwood_xor1_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor10_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor10_data.cap_mask);
+	platform_device_register(&kirkwood_xor10_channel);
+
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor11_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, kirkwood_xor11_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor11_data.cap_mask);
+	platform_device_register(&kirkwood_xor11_channel);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 static void kirkwood_timer_init(void)
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5dee2f6b40a..69cd113af03 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -33,8 +33,11 @@ void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_pcie_init(void);
 void kirkwood_rtc_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_spi_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
+void kirkwood_xor0_init(void);
+void kirkwood_xor1_init(void);
 
 extern struct sys_timer kirkwood_timer;
 
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d5c482c628e..610fb24d8ae 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -21,7 +21,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index f55fb8ad9ee..c0cc5b5c82a 100644
--- a/include/asm-arm/arch-kirkwood/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -1,12 +1,12 @@
 /*
- * include/asm-arm/arch-kirkwood/debug-macro.S
+ * arch/arm/mach-kirkwood/include/mach/debug-macro.S
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/arch/arm/mach-kirkwood/include/mach/dma.h
index 40a8c178f10..40a8c178f10 100644
--- a/include/asm-arm/arch-kirkwood/dma.h
+++ b/arch/arm/mach-kirkwood/include/mach/dma.h
diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
index fc6a43d9355..83e0cba77b3 100644
--- a/include/asm-arm/arch-kirkwood/entry-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-kirkwood/entry-macro.S
+ * arch/arm/mach-kirkwood/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for Marvell Kirkwood platforms
  *
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
index e695719771a..cde85283f7d 100644
--- a/include/asm-arm/arch-kirkwood/hardware.h
+++ b/arch/arm/mach-kirkwood/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-kirkwood/hardware.h
+ * arch/arm/mach-kirkwood/include/mach/hardware.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-arm/arch-kirkwood/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index 0ef6e95f5d5..be07be0ef52 100644
--- a/include/asm-arm/arch-kirkwood/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-kirkwood/io.h
+ * arch/arm/mach-kirkwood/include/mach/io.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
index 2e7b5da6335..6fd05838c72 100644
--- a/include/asm-arm/arch-kirkwood/irqs.h
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-kirkwood/irqs.h
+ * arch/arm/mach-kirkwood/include/mach/irqs.h
  *
  * IRQ definitions for Marvell Kirkwood SoCs
  *
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index bb31b315c35..5c69992295e 100644
--- a/include/asm-arm/arch-kirkwood/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-kirkwood/kirkwood.h
+ * arch/arm/mach-kirkwood/include/mach/kirkwood.h
  *
  * Generic definitions for Marvell Kirkwood SoC flavors:
  *  88F6180, 88F6192 and 88F6281.
@@ -88,6 +88,15 @@
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 
+#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60800)
+#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60800)
+#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60900)
+#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60900)
+#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
+#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
+#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
+#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
+
 #define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
 #define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
 
diff --git a/include/asm-arm/arch-loki/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
index 835101e4987..b5fb34bdccd 100644
--- a/include/asm-arm/arch-loki/memory.h
+++ b/arch/arm/mach-kirkwood/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-loki/memory.h
+ * arch/arm/mach-kirkwood/include/mach/memory.h
  */
 
 #ifndef __ASM_ARCH_MEMORY_H
diff --git a/include/asm-arm/arch-mv78xx0/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
index 7eb47d376db..8510f6cfdab 100644
--- a/include/asm-arm/arch-mv78xx0/system.h
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-mv78xx0/system.h
+ * arch/arm/mach-kirkwood/include/mach/system.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -9,8 +9,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/hardware.h>
+#include <mach/kirkwood.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-kirkwood/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
index 82122e134e3..f77ef4a32c5 100644
--- a/include/asm-arm/arch-kirkwood/timex.h
+++ b/arch/arm/mach-kirkwood/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-kirkwood/timex.h
+ * arch/arm/mach-kirkwood/include/mach/timex.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
index a9062b6d768..75d5497df3a 100644
--- a/include/asm-arm/arch-kirkwood/uncompress.h
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-kirkwood/uncompress.h
+ * arch/arm/mach-kirkwood/include/mach/uncompress.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -7,7 +7,7 @@
  */
 
 #include <linux/serial_reg.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 
 #define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
 
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
new file mode 100644
index 00000000000..8f48260dcda
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 302bb2cf666..5790643ffe0 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
 #include "common.h"
 
 void __init kirkwood_init_irq(void)
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 8282d0ff84b..2195fa31f6b 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -12,7 +12,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 #include "common.h"
 
 
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 6cf642c504d..a3012d44597 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -18,10 +18,13 @@
 #include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include "common.h"
 
 #define RD88F6192_GPIO_USB_VBUS		10
@@ -34,6 +37,21 @@ static struct mv_sata_platform_data rd88f6192_sata_data = {
 	.n_ports	= 2,
 };
 
+static const struct flash_platform_data rd88F6192_spi_slave_data = {
+	.type		= "m25p128",
+};
+
+static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &rd88F6192_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
 static void __init rd88f6192_init(void)
 {
 	/*
@@ -45,7 +63,12 @@ static void __init rd88f6192_init(void)
 	kirkwood_ge00_init(&rd88f6192_ge00_data);
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6192_sata_data);
+	spi_register_board_info(rd88F6192_spi_slave_info,
+				ARRAY_SIZE(rd88F6192_spi_slave_info));
+	kirkwood_spi_init();
 	kirkwood_uart0_init();
+	kirkwood_xor0_init();
+	kirkwood_xor1_init();
 }
 
 static int __init rd88f6192_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index e1f8de2c74a..d96487a0f18 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -18,11 +18,12 @@
 #include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/kirkwood.h>
+#include <plat/orion_nand.h>
 #include "common.h"
 
 static struct mtd_partition rd88f6281_nand_parts[] = {
@@ -69,6 +70,8 @@ static struct platform_device rd88f6281_nand_flash = {
 
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct mv_sata_platform_data rd88f6281_sata_data = {
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 05ac2bd0402..0468e93b7d3 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -18,7 +18,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/devices.h>
+#include <mach/devices.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index 407d255e42b..c6c08e80023 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -25,13 +25,13 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/regs-sys.h>
-#include <asm/arch/regs-misc.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-misc.h>
 
 
 static struct __initdata map_desc ks8695_io_desc[] = {
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 3db2ec61d06..4bd251482c8 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -22,9 +22,9 @@
 
 #include <linux/platform_device.h>
 
-#include <asm/arch/regs-wan.h>
-#include <asm/arch/regs-lan.h>
-#include <asm/arch/regs-hpna.h>
+#include <mach/regs-wan.h>
+#include <mach/regs-lan.h>
+#include <mach/regs-hpna.h>
 
 
 /* --------------------------------------------------------------------
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index 5e46191c0af..3624e65cd89 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -25,11 +25,11 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio.h>
 
 /*
  * Configure a GPIO line for either GPIO function, or its internal
diff --git a/include/asm-arm/arch-ks8695/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index cd5f2fb1f06..3782c355949 100644
--- a/include/asm-arm/arch-ks8695/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/debug-macro.S
+ * arch/arm/mach-ks8695/include/mach/debug-macro.S
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
@@ -11,8 +11,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/hardware.h>
-#include <asm/arch/regs-uart.h>
+#include <mach/hardware.h>
+#include <mach/regs-uart.h>
 
 	.macro	addruart, rx
 		mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-ks8695/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
index 7ad2c656e16..2744fecb429 100644
--- a/include/asm-arm/arch-ks8695/devices.h
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/devices.h
+ * arch/arm/mach-ks8695/include/mach/devices.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/dma.h b/arch/arm/mach-ks8695/include/mach/dma.h
index e5159ed42a4..56120628008 100644
--- a/include/asm-arm/arch-ks8695/dma.h
+++ b/arch/arm/mach-ks8695/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/dma.h
+ * arch/arm/mach-ks8695/include/mach/dma.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/include/asm-arm/arch-ks8695/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
index e34bdf85920..b4fe0c11c6c 100644
--- a/include/asm-arm/arch-ks8695/entry-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/entry-macro.S
+ * arch/arm/mach-ks8695/include/mach/entry-macro.S
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
@@ -11,8 +11,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <asm/hardware.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
 
 	.macro	disable_fiq
 	.endm
diff --git a/include/asm-arm/arch-ks8695/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
index 65ceea28607..73c84168761 100644
--- a/include/asm-arm/arch-ks8695/gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/gpio.h
+ * arch/arm/mach-ks8695/include/mach/gpio.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
index cb732bff328..1d640d075b7 100644
--- a/include/asm-arm/arch-ks8695/hardware.h
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/hardware.h
+ * arch/arm/mach-ks8695/include/mach/hardware.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
diff --git a/include/asm-arm/arch-ks8695/io.h b/arch/arm/mach-ks8695/include/mach/io.h
index 8edc4bd6aad..f364f24ffe1 100644
--- a/include/asm-arm/arch-ks8695/io.h
+++ b/arch/arm/mach-ks8695/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/io.h
+ * arch/arm/mach-ks8695/include/mach/io.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h
index 8b1c4fe96a8..86fc9e6ce40 100644
--- a/include/asm-arm/arch-ks8695/irqs.h
+++ b/arch/arm/mach-ks8695/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ks8695/irqs.h
+ * arch/arm/mach-ks8695/include/mach/irqs.h
  *
  * Copyright (C) 2006 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-ks8695/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 24f6a6e4a30..dadbe66cb75 100644
--- a/include/asm-arm/arch-ks8695/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/memory.h
+ * arch/arm/mach-ks8695/include/mach/memory.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
@@ -13,7 +13,7 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Physical SRAM offset.
diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
index 6b95d77aea1..0df6fe61d1c 100644
--- a/include/asm-arm/arch-ks8695/regs-gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-gpio.h
+ * arch/arm/mach-ks8695/include/mach/regs-gpio.h
  *
  * Copyright (C) 2007 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/regs-hpna.h b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
index 14091cdec10..815ce5c2e3b 100644
--- a/include/asm-arm/arch-ks8695/regs-hpna.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-wan.h
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/regs-irq.h b/arch/arm/mach-ks8695/include/mach/regs-irq.h
index 70b193f6b75..352b7e8704d 100644
--- a/include/asm-arm/arch-ks8695/regs-irq.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-irq.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-irq.h
+ * arch/arm/mach-ks8695/include/mach/regs-irq.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
diff --git a/include/asm-arm/arch-ks8695/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
index a63bd61c64e..9ef409901e7 100644
--- a/include/asm-arm/arch-ks8695/regs-lan.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-lan.h
+ * arch/arm/mach-ks8695/include/mach/regs-lan.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/regs-mem.h b/arch/arm/mach-ks8695/include/mach/regs-mem.h
index 76b38e0862e..55806bc68ce 100644
--- a/include/asm-arm/arch-ks8695/regs-mem.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-mem.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-mem.h
+ * arch/arm/mach-ks8695/include/mach/regs-mem.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/regs-misc.h b/arch/arm/mach-ks8695/include/mach/regs-misc.h
index 632ca6601a9..2740c52494a 100644
--- a/include/asm-arm/arch-ks8695/regs-misc.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-misc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-misc.h
+ * arch/arm/mach-ks8695/include/mach/regs-misc.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/regs-pci.h b/arch/arm/mach-ks8695/include/mach/regs-pci.h
index 286d6d488df..75a9db6edbd 100644
--- a/include/asm-arm/arch-ks8695/regs-pci.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-pci.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-pci.h
+ * arch/arm/mach-ks8695/include/mach/regs-pci.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
diff --git a/include/asm-arm/arch-ks8695/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
index 5f37be3f2f6..56d12e8de89 100644
--- a/include/asm-arm/arch-ks8695/regs-switch.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-switch.h
+ * arch/arm/mach-ks8695/include/mach/regs-switch.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/regs-sys.h b/arch/arm/mach-ks8695/include/mach/regs-sys.h
index f3179815b8e..57c20be0c12 100644
--- a/include/asm-arm/arch-ks8695/regs-sys.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-sys.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-sys.h
+ * arch/arm/mach-ks8695/include/mach/regs-sys.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
diff --git a/include/asm-arm/arch-ks8695/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h
index 0a9f7f99ec5..e620cda99d2 100644
--- a/include/asm-arm/arch-ks8695/regs-timer.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-timer.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-timer.h
+ * arch/arm/mach-ks8695/include/mach/regs-timer.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
diff --git a/include/asm-arm/arch-ks8695/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h
index a27cb20502a..8581fbc6245 100644
--- a/include/asm-arm/arch-ks8695/regs-uart.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-uart.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ks8695/regs-uart.h
+ * arch/arm/mach-ks8695/include/mach/regs-uart.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
diff --git a/include/asm-arm/arch-ks8695/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
index 52e35b0d65e..eb494ec6e95 100644
--- a/include/asm-arm/arch-ks8695/regs-wan.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/regs-wan.h
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
  *
  * Copyright (C) 2006 Andrew Victor
  *
diff --git a/include/asm-arm/arch-ks8695/system.h b/arch/arm/mach-ks8695/include/mach/system.h
index 3bc28106d93..2a6f9186905 100644
--- a/include/asm-arm/arch-ks8695/system.h
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-s3c2410/system.h
+ * arch/arm/mach-s3c2410/include/mach/system.h
  *
  * Copyright (C) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -15,7 +15,7 @@
 #define __ASM_ARCH_SYSTEM_H
 
 #include <asm/io.h>
-#include <asm/arch/regs-timer.h>
+#include <mach/regs-timer.h>
 
 static void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-ks8695/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
index 8320d528b90..4682e350369 100644
--- a/include/asm-arm/arch-ks8695/timex.h
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/timex.h
+ * arch/arm/mach-ks8695/include/mach/timex.h
  *
  * Copyright (C) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-ks8695/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
index 733a50855b5..0eee37a6907 100644
--- a/include/asm-arm/arch-ks8695/uncompress.h
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/uncompress.h
+ * arch/arm/mach-ks8695/include/mach/uncompress.h
  *
  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
  * Copyright (C) 2006 Simtec Electronics
@@ -15,7 +15,7 @@
 #define __ASM_ARCH_UNCOMPRESS_H
 
 #include <asm/io.h>
-#include <asm/arch/regs-uart.h>
+#include <mach/regs-uart.h>
 
 static void putc(char c)
 {
diff --git a/include/asm-arm/arch-ks8695/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
index d1d88e58117..744ac66be3a 100644
--- a/include/asm-arm/arch-ks8695/vmalloc.h
+++ b/arch/arm/mach-ks8695/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ks8695/vmalloc.h
+ * arch/arm/mach-ks8695/include/mach/vmalloc.h
  *
  * Copyright (C) 2006 Ben Dooks
  * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index 0b06941a1ee..e5e71f4dbb8 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 static void ks8695_irq_mask(unsigned int irqno)
 {
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index d61762ae50d..184ef74e4be 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -12,10 +12,9 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/mach-types.h>
 #include <asm/leds.h>
-#include <asm/arch/devices.h>
-#include <asm/arch/gpio.h>
+#include <mach/devices.h>
+#include <mach/gpio.h>
 
 
 static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index 3f4e0330cb1..1746c67af17 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -31,10 +31,10 @@
 #include <asm/io.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/devices.h>
-#include <asm/arch/regs-pci.h>
+#include <mach/devices.h>
+#include <mach/regs-pci.h>
 
 
 static int pci_dbg;
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 02f766b3121..940888dffc1 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -28,8 +28,8 @@
 #include <asm/io.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-timer.h>
+#include <mach/regs-irq.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
index 561a0fe7095..50d23246d4f 100644
--- a/arch/arm/mach-l7200/core.c
+++ b/arch/arm/mach-l7200/core.c
@@ -13,7 +13,7 @@
 #include <asm/types.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 
 #include <asm/mach/arch.h>
diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
index 5b4396de16a..4671558cdd5 100644
--- a/include/asm-arm/arch-l7200/aux_reg.h
+++ b/arch/arm/mach-l7200/include/mach/aux_reg.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/aux_reg.h
+ * arch/arm/mach-l7200/include/mach/aux_reg.h
  *
  * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
  *
@@ -9,7 +9,7 @@
 #ifndef _ASM_ARCH_AUXREG_H
 #define _ASM_ARCH_AUXREG_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
 
diff --git a/include/asm-arm/arch-l7200/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index 846473318e8..34eed2a63e6 100644
--- a/include/asm-arm/arch-l7200/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-l7200/debug-macro.S
+/* arch/arm/mach-l7200/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-l7200/dma.h b/arch/arm/mach-l7200/include/mach/dma.h
index 4c7eca63f03..c7e48bd4590 100644
--- a/include/asm-arm/arch-l7200/dma.h
+++ b/arch/arm/mach-l7200/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/dma.h
+ * arch/arm/mach-l7200/include/mach/dma.h
  *
  * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
  *
diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
index 63411d3e9df..1726d91fc1d 100644
--- a/include/asm-arm/arch-l7200/entry-macro.S
+++ b/arch/arm/mach-l7200/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-l7200/entry-macro.S
+ * arch/arm/mach-l7200/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for L7200-based platforms
  *
@@ -7,7 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 		.equ	irq_base_addr,	IO_BASE_2
 
diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
index 9c4804d1357..2b7086a26b8 100644
--- a/include/asm-arm/arch-l7200/gp_timers.h
+++ b/arch/arm/mach-l7200/include/mach/gp_timers.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/gp_timers.h
+ * arch/arm/mach-l7200/include/mach/gp_timers.h
  *
  * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
  *
@@ -10,7 +10,7 @@
 #ifndef _ASM_ARCH_GPTIMERS_H
 #define _ASM_ARCH_GPTIMERS_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Layout of L7200 general purpose timer registers
diff --git a/include/asm-arm/arch-l7200/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
index 0b63e4239bd..c7b0a5d7b8b 100644
--- a/include/asm-arm/arch-l7200/gpio.h
+++ b/arch/arm/mach-l7200/include/mach/gpio.h
@@ -1,6 +1,6 @@
 /****************************************************************************/
 /*
- *      linux/include/asm-arm/arch-l7200/gpio.h
+ *      arch/arm/mach-l7200/include/mach/gpio.h
  *
  *      Registers and  helper functions for the L7200 Link-Up Systems
  *      GPIO.
diff --git a/include/asm-arm/arch-l7200/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
index 2ab43f3a4a8..c31909cfc25 100644
--- a/include/asm-arm/arch-l7200/hardware.h
+++ b/arch/arm/mach-l7200/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/hardware.h
+ * arch/arm/mach-l7200/include/mach/hardware.h
  *
  * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
  *                    Steve Hill (sjhill@cotw.com)
diff --git a/include/asm-arm/arch-l7200/io.h b/arch/arm/mach-l7200/include/mach/io.h
index 645dbdfb390..d432ba9e5df 100644
--- a/include/asm-arm/arch-l7200/io.h
+++ b/arch/arm/mach-l7200/include/mach/io.h
@@ -1,16 +1,16 @@
 /*
- * linux/include/asm-arm/arch-l7200/io.h
+ * arch/arm/mach-l7200/include/mach/io.h
  *
  * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
  *
  * Changelog:
- *  03-21-2000	SJH	Created from linux/include/asm-arm/arch-nexuspci/io.h
+ *  03-21-2000	SJH	Created from arch/arm/mach-nexuspci/include/mach/io.h
  *  08-31-2000	SJH	Added in IO functions necessary for new drivers
  */
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-l7200/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
index 7120c016e29..7edffd713c5 100644
--- a/include/asm-arm/arch-l7200/irqs.h
+++ b/arch/arm/mach-l7200/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-l7200/irqs.h
+ * arch/arm/mach-l7200/include/mach/irqs.h
  *
  * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
  *                    Steve Hill (sjhill@cotw.com)
diff --git a/include/asm-arm/arch-l7200/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
index 402df637e74..f338cf3ffd9 100644
--- a/include/asm-arm/arch-l7200/memory.h
+++ b/arch/arm/mach-l7200/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/memory.h
+ * arch/arm/mach-l7200/include/mach/memory.h
  *
  * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
  * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
diff --git a/include/asm-arm/arch-l7200/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
index 730056c194b..3959871e836 100644
--- a/include/asm-arm/arch-l7200/pmpcon.h
+++ b/arch/arm/mach-l7200/include/mach/pmpcon.h
@@ -1,6 +1,6 @@
 /****************************************************************************/
 /*
- *  linux/include/asm-arm/arch-l7200/pmpcon.h
+ *  arch/arm/mach-l7200/include/mach/pmpcon.h
  *
  *   Registers and  helper functions for the L7200 Link-Up Systems
  *   DC/DC converter register.
diff --git a/include/asm-arm/arch-l7200/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
index 57faea76d1b..a2da7aedf20 100644
--- a/include/asm-arm/arch-l7200/pmu.h
+++ b/arch/arm/mach-l7200/include/mach/pmu.h
@@ -1,6 +1,6 @@
 /****************************************************************************/
 /*
- *  linux/include/asm-arm/arch-l7200/pmu.h
+ *  arch/arm/mach-l7200/include/mach/pmu.h
  *
  *   Registers and  helper functions for the L7200 Link-Up Systems
  *   Power Management Unit (PMU).
diff --git a/include/asm-arm/arch-l7200/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
index defb8b7fca7..adc05e5f837 100644
--- a/include/asm-arm/arch-l7200/serial.h
+++ b/arch/arm/mach-l7200/include/mach/serial.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/serial.h
+ * arch/arm/mach-l7200/include/mach/serial.h
  *
  * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
  *                    Steve Hill (sjhill@cotw.com)
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
index b1008a9d23e..645f1c5e568 100644
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ b/arch/arm/mach-l7200/include/mach/serial_l7200.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/serial_l7200.h
+ * arch/arm/mach-l7200/include/mach/serial_l7200.h
  *
  * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
  *
@@ -9,7 +9,7 @@
 #ifndef __ASM_ARCH_SERIAL_L7200_H
 #define __ASM_ARCH_SERIAL_L7200_H
 
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 
 /*
  * This assumes you have a 3.6864 MHz clock for your UART.
diff --git a/include/asm-arm/arch-l7200/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
index bf4364ee253..965728712cf 100644
--- a/include/asm-arm/arch-l7200/sib.h
+++ b/arch/arm/mach-l7200/include/mach/sib.h
@@ -1,6 +1,6 @@
 /****************************************************************************/
 /*
- *  linux/include/asm-arm/arch-l7200/sib.h
+ *  arch/arm/mach-l7200/include/mach/sib.h
  *
  *  Registers and helper functions for the Serial Interface Bus.
  *
diff --git a/include/asm-arm/arch-l7200/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
index 771c774f481..2d7722be60e 100644
--- a/include/asm-arm/arch-l7200/sys-clock.h
+++ b/arch/arm/mach-l7200/include/mach/sys-clock.h
@@ -1,6 +1,6 @@
 /****************************************************************************/
 /*
- *  linux/include/asm-arm/arch-l7200/sys-clock.h
+ *  arch/arm/mach-l7200/include/mach/sys-clock.h
  *
  *   Registers and  helper functions for the L7200 Link-Up Systems
  *   System clocks.
diff --git a/include/asm-arm/arch-l7200/system.h b/arch/arm/mach-l7200/include/mach/system.h
index 18825cf071b..5272abee0d0 100644
--- a/include/asm-arm/arch-l7200/system.h
+++ b/arch/arm/mach-l7200/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/system.h
+ * arch/arm/mach-l7200/include/mach/system.h
  *
  * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
  *
@@ -12,7 +12,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-l7200/time.h b/arch/arm/mach-l7200/include/mach/time.h
index ea22f7fff9c..061771c2c2b 100644
--- a/include/asm-arm/arch-l7200/time.h
+++ b/arch/arm/mach-l7200/include/mach/time.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/time.h
+ * arch/arm/mach-l7200/include/mach/time.h
  *
  * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
  *                    Steve Hill (sjhill@cotw.com)
@@ -11,7 +11,7 @@
 #ifndef _ASM_ARCH_TIME_H
 #define _ASM_ARCH_TIME_H
 
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 /*
  * RTC base register address
diff --git a/include/asm-arm/arch-l7200/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
index 3c3202620f0..ffc96a63b5a 100644
--- a/include/asm-arm/arch-l7200/timex.h
+++ b/arch/arm/mach-l7200/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/timex.h
+ * arch/arm/mach-l7200/include/mach/timex.h
  *
  * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
  *                    Steve Hill (sjhill@cotw.com)
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
index 04be2a08863..591c962bb31 100644
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ b/arch/arm/mach-l7200/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-l7200/uncompress.h
+ * arch/arm/mach-l7200/include/mach/uncompress.h
  *
  * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
  *
@@ -9,7 +9,7 @@
  *  07-26-2000	SJH	Removed hard coded baud rate
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_UART  IO_START + 0x00044000
 
diff --git a/include/asm-arm/arch-l7200/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
index 816231eedaa..85f0abbf15f 100644
--- a/include/asm-arm/arch-l7200/vmalloc.h
+++ b/arch/arm/mach-l7200/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
- * linux/include/asm-arm/arch-l7200/vmalloc.h
+ * arch/arm/mach-l7200/include/mach/vmalloc.h
  */
 #define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 2ef7d0097b3..551b9726182 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -13,7 +13,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index fe64946f9e1..e373fb8e269 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
index 1992db4c252..a2a543258fc 100644
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ b/arch/arm/mach-lh7a40x/clcd.c
@@ -17,14 +17,13 @@
 
 //#include <linux/module.h>
 //#include <linux/time.h>
-//#include <asm/hardware.h>
 
 //#include <asm/mach/time.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
index 7530a95c15a..4fb23ac6b5a 100644
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -9,8 +9,8 @@
  */
 
 #include <linux/cpufreq.h>
-#include <asm/hardware.h>
-#include <asm/arch/clocks.h>
+#include <mach/hardware.h>
+#include <mach/clocks.h>
 #include <linux/err.h>
 
 struct module;
diff --git a/include/asm-arm/arch-lh7a40x/clocks.h b/arch/arm/mach-lh7a40x/include/mach/clocks.h
index 7d0ba18ad57..fe2e0255c08 100644
--- a/include/asm-arm/arch-lh7a40x/clocks.h
+++ b/arch/arm/mach-lh7a40x/include/mach/clocks.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/clocks.h
+/* arch/arm/mach-lh7a40x/include/mach/clocks.h
  *
  *  Copyright (C) 2004 Marc Singer
  *
diff --git a/include/asm-arm/arch-lh7a40x/constants.h b/arch/arm/mach-lh7a40x/include/mach/constants.h
index 51de96e87fa..55c6edbc2df 100644
--- a/include/asm-arm/arch-lh7a40x/constants.h
+++ b/arch/arm/mach-lh7a40x/include/mach/constants.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/constants.h
+/* arch/arm/mach-lh7a40x/include/mach/constants.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *  Copyright (C) 2004 Logic Product Development
diff --git a/include/asm-arm/arch-lh7a40x/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index 421dcd6a850..85141ed5383 100644
--- a/include/asm-arm/arch-lh7a40x/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-lh7a40x/debug-macro.S
+/* arch/arm/mach-lh7a40x/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/arch/arm/mach-lh7a40x/include/mach/dma.h
index a8cbd14bbf9..baa3f8dbd04 100644
--- a/include/asm-arm/arch-lh7a40x/dma.h
+++ b/arch/arm/mach-lh7a40x/include/mach/dma.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/dma.h
+/* arch/arm/mach-lh7a40x/include/mach/dma.h
  *
  *  Copyright (C) 2005 Marc Singer
  *
diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
index ffe397250f0..069bb4cefff 100644
--- a/include/asm-arm/arch-lh7a40x/entry-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-lh7a40x/entry-macro.S
+ * arch/arm/mach-lh7a40x/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for LH7A40x platforms
  *
@@ -7,8 +7,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
 
 /* In order to allow there to be support for both of the processor
    classes at the same time, we make a hack here that isn't very
diff --git a/include/asm-arm/arch-lh7a40x/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
index e9ff74fd793..48e827d2fa5 100644
--- a/include/asm-arm/arch-lh7a40x/hardware.h
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -1,8 +1,8 @@
-/* include/asm-arm/arch-lh7a40x/hardware.h
+/* arch/arm/mach-lh7a40x/include/mach/hardware.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *
- *  [ Substantially cribbed from include/asm-arm/arch-pxa/hardware.h ]
+ *  [ Substantially cribbed from arch/arm/mach-pxa/include/mach/hardware.h ]
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/include/asm-arm/arch-lh7a40x/io.h b/arch/arm/mach-lh7a40x/include/mach/io.h
index 17bc9409748..031d26f9163 100644
--- a/include/asm-arm/arch-lh7a40x/io.h
+++ b/arch/arm/mach-lh7a40x/include/mach/io.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/io.h
+/* arch/arm/mach-lh7a40x/include/mach/io.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_IO_H
 #define __ASM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/arch/arm/mach-lh7a40x/include/mach/irqs.h
index afe8c7cbad6..0f9b8367593 100644
--- a/include/asm-arm/arch-lh7a40x/irqs.h
+++ b/arch/arm/mach-lh7a40x/include/mach/irqs.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/irqs.h
+/* arch/arm/mach-lh7a40x/include/mach/irqs.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *  Copyright (C) 2004 Logic Product Development
diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
index 9b0c8012e71..f7107b4c197 100644
--- a/include/asm-arm/arch-lh7a40x/memory.h
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/memory.h
+/* arch/arm/mach-lh7a40x/include/mach/memory.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *
diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/arch/arm/mach-lh7a40x/include/mach/registers.h
index b4f09b3e2d0..ea44396383a 100644
--- a/include/asm-arm/arch-lh7a40x/registers.h
+++ b/arch/arm/mach-lh7a40x/include/mach/registers.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/registers.h
+/* arch/arm/mach-lh7a40x/include/mach/registers.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *  Copyright (C) 2004 Logic Product Development
@@ -9,7 +9,7 @@
  *
  */
 
-#include <asm/arch/constants.h>
+#include <mach/constants.h>
 
 #ifndef __ASM_ARCH_REGISTERS_H
 #define __ASM_ARCH_REGISTERS_H
diff --git a/include/asm-arm/arch-lh7a40x/ssp.h b/arch/arm/mach-lh7a40x/include/mach/ssp.h
index 132b1c4d5ce..509916182e3 100644
--- a/include/asm-arm/arch-lh7a40x/ssp.h
+++ b/arch/arm/mach-lh7a40x/include/mach/ssp.h
@@ -1,5 +1,4 @@
 /* ssp.h
-     $Id$
 
    written by Marc Singer
    6 Dec 2004
diff --git a/include/asm-arm/arch-lh7a40x/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
index e1df8aa460f..fa46bb1ef07 100644
--- a/include/asm-arm/arch-lh7a40x/system.h
+++ b/arch/arm/mach-lh7a40x/include/mach/system.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/system.h
+/* arch/arm/mach-lh7a40x/include/mach/system.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *
diff --git a/include/asm-arm/arch-lh7a40x/timex.h b/arch/arm/mach-lh7a40x/include/mach/timex.h
index fa726b67082..08028cef1b3 100644
--- a/include/asm-arm/arch-lh7a40x/timex.h
+++ b/arch/arm/mach-lh7a40x/include/mach/timex.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/timex.h
+/* arch/arm/mach-lh7a40x/include/mach/timex.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *
@@ -8,7 +8,7 @@
  *
  */
 
-#include <asm/arch/constants.h>
+#include <mach/constants.h>
 
 #define CLOCK_TICK_RATE		(PLL_CLOCK/6/16)
 
diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
index 3d1ce0426a3..55b80d479eb 100644
--- a/include/asm-arm/arch-lh7a40x/uncompress.h
+++ b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/uncompress.h
+/* arch/arm/mach-lh7a40x/include/mach/uncompress.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *
@@ -8,7 +8,7 @@
  *
  */
 
-#include <asm/arch/registers.h>
+#include <mach/registers.h>
 
 #ifndef UART_R_DATA
 # define UART_R_DATA	(0x00)
diff --git a/include/asm-arm/arch-lh7a40x/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
index 8163e45109b..3fbd49490bb 100644
--- a/include/asm-arm/arch-lh7a40x/vmalloc.h
+++ b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-lh7a40x/vmalloc.h
+/* arch/arm/mach-lh7a40x/include/mach/vmalloc.h
  *
  *  Copyright (C) 2004 Coastal Environmental Systems
  *
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index 9472bbebd8a..1ad3afcf6b3 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -12,10 +12,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index 9b28389035e..12b045b688c 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -12,10 +12,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 66e1ed3961e..0d5063ebda1 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -13,10 +13,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h
index df6e38ed425..a7f5027b2f7 100644
--- a/arch/arm/mach-lh7a40x/lcd-panel.h
+++ b/arch/arm/mach-lh7a40x/lcd-panel.h
@@ -1,5 +1,4 @@
 /* lcd-panel.h
-     $Id$
 
    written by Marc Singer
    18 Jul 2005
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
index a10830186da..51fbef9601b 100644
--- a/arch/arm/mach-lh7a40x/ssp-cpld.c
+++ b/arch/arm/mach-lh7a40x/ssp-cpld.c
@@ -46,9 +46,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/ssp.h>
+#include <mach/ssp.h>
 
 //#define TALK
 
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index e50e60b3385..7fe9e06cf66 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -14,7 +14,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
index ba25e56ade5..70ca56bb6f3 100644
--- a/arch/arm/mach-loki/addr-map.c
+++ b/arch/arm/mach-loki/addr-map.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
index 410f50399dd..c0d2d9d12e7 100644
--- a/arch/arm/mach-loki/common.c
+++ b/arch/arm/mach-loki/common.c
@@ -18,9 +18,9 @@
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/loki.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/loki.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
diff --git a/include/asm-arm/arch-loki/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
index 585502e9651..a8c20bd2f95 100644
--- a/include/asm-arm/arch-loki/debug-macro.S
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -1,12 +1,12 @@
 /*
- * include/asm-arm/arch-loki/debug-macro.S
+ * arch/arm/mach-loki/include/mach/debug-macro.S
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-loki/dma.h b/arch/arm/mach-loki/include/mach/dma.h
index 40a8c178f10..40a8c178f10 100644
--- a/include/asm-arm/arch-loki/dma.h
+++ b/arch/arm/mach-loki/include/mach/dma.h
diff --git a/include/asm-arm/arch-loki/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S
index 693257cdbeb..332af38ec13 100644
--- a/include/asm-arm/arch-loki/entry-macro.S
+++ b/arch/arm/mach-loki/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-loki/entry-macro.S
+ * arch/arm/mach-loki/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
  *
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/include/asm-arm/arch-loki/hardware.h b/arch/arm/mach-loki/include/mach/hardware.h
index f65b01c733b..d7bfc8f1772 100644
--- a/include/asm-arm/arch-loki/hardware.h
+++ b/arch/arm/mach-loki/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-loki/hardware.h
+ * arch/arm/mach-loki/include/mach/hardware.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-arm/arch-loki/io.h b/arch/arm/mach-loki/include/mach/io.h
index e7418a915e7..a373cd582c8 100644
--- a/include/asm-arm/arch-loki/io.h
+++ b/arch/arm/mach-loki/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-loki/io.h
+ * arch/arm/mach-loki/include/mach/io.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
diff --git a/include/asm-arm/arch-loki/irqs.h b/arch/arm/mach-loki/include/mach/irqs.h
index 7e497143807..9fbd3326867 100644
--- a/include/asm-arm/arch-loki/irqs.h
+++ b/arch/arm/mach-loki/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-loki/irqs.h
+ * arch/arm/mach-loki/include/mach/irqs.h
  *
  * IRQ definitions for Marvell Loki (88RC8480) SoCs
  *
diff --git a/include/asm-arm/arch-loki/loki.h b/arch/arm/mach-loki/include/mach/loki.h
index 5dd05ee0a4e..c00af6ba557 100644
--- a/include/asm-arm/arch-loki/loki.h
+++ b/arch/arm/mach-loki/include/mach/loki.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-loki/loki.h
+ * arch/arm/mach-loki/include/mach/loki.h
  *
  * Generic definitions for Marvell Loki (88RC8480) SoC flavors
  *
diff --git a/include/asm-arm/arch-mv78xx0/memory.h b/arch/arm/mach-loki/include/mach/memory.h
index 721a6b185b9..a39533ab489 100644
--- a/include/asm-arm/arch-mv78xx0/memory.h
+++ b/arch/arm/mach-loki/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-mv78xx0/memory.h
+ * arch/arm/mach-loki/include/mach/memory.h
  */
 
 #ifndef __ASM_ARCH_MEMORY_H
diff --git a/include/asm-arm/arch-loki/system.h b/arch/arm/mach-loki/include/mach/system.h
index a3568ac8ec3..8db1147d4ec 100644
--- a/include/asm-arm/arch-loki/system.h
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-loki/system.h
+ * arch/arm/mach-loki/include/mach/system.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -9,8 +9,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/loki.h>
+#include <mach/hardware.h>
+#include <mach/loki.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-loki/timex.h b/arch/arm/mach-loki/include/mach/timex.h
index 940014f97ca..9df21091529 100644
--- a/include/asm-arm/arch-loki/timex.h
+++ b/arch/arm/mach-loki/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-loki/timex.h
+ * arch/arm/mach-loki/include/mach/timex.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
diff --git a/include/asm-arm/arch-loki/uncompress.h b/arch/arm/mach-loki/include/mach/uncompress.h
index 89a0cf88d3a..90b2a7e65da 100644
--- a/include/asm-arm/arch-loki/uncompress.h
+++ b/arch/arm/mach-loki/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-loki/uncompress.h
+ * arch/arm/mach-loki/include/mach/uncompress.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -7,7 +7,7 @@
  */
 
 #include <linux/serial_reg.h>
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
 
 #define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
 
diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h
new file mode 100644
index 00000000000..8dc3bfcbf9f
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-loki/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
index d839af91fe0..5a487930cb2 100644
--- a/arch/arm/mach-loki/irq.c
+++ b/arch/arm/mach-loki/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
 #include "common.h"
 
 void __init loki_init_irq(void)
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index d1b9e6e6253..2cc9ac9b488 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -19,7 +19,7 @@
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
 #include "common.h"
 
 #define LB88RC8480_FLASH_BOOT_CS_BASE	0xf8000000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 86dfb2b5261..995afc4ade4 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -19,14 +19,14 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
 
 #include <asm/io.h>
 #include <asm/delay.h>
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
index 3f5d3362f88..3a511368a5d 100644
--- a/arch/arm/mach-msm/common.c
+++ b/arch/arm/mach-msm/common.c
@@ -28,9 +28,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 struct flash_platform_data msm_nand_data = {
 	.parts		= 0,
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 8b0f339b327..9de08265d97 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -15,7 +15,7 @@
 
 #include <asm/io.h>
 #include <linux/interrupt.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16
 
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
index 2b1cb7f1694..6a94f052713 100644
--- a/arch/arm/mach-msm/idle.S
+++ b/arch/arm/mach-msm/idle.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/idle.S
+/* arch/arm/mach-msm/include/mach/idle.S
  *
  * Idle processing for MSM7K - work around bugs with SWFI.
  *
diff --git a/include/asm-arm/arch-msm/board.h b/arch/arm/mach-msm/include/mach/board.h
index 763051f8ba1..a7639493c09 100644
--- a/include/asm-arm/arch-msm/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/board.h
+/* arch/arm/mach-msm/include/mach/board.h
  *
  * Copyright (C) 2007 Google, Inc.
  * Author: Brian Swetland <swetland@google.com>
diff --git a/include/asm-arm/arch-msm/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 393d5272e50..528eef4b605 100644
--- a/include/asm-arm/arch-msm/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-msm7200/debug-macro.S
+/* arch/arm/mach-msm7200/include/mach/debug-macro.S
  *
  * Copyright (C) 2007 Google, Inc.
  * Author: Brian Swetland <swetland@google.com>
@@ -14,8 +14,8 @@
  *
  */
 
-#include <asm/hardware.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
 
 	.macro	addruart,rx
 	@ see if the MMU is enabled and select appropriate base address
diff --git a/include/asm-arm/arch-msm/dma.h b/arch/arm/mach-msm/include/mach/dma.h
index e4b565b27b3..ad1c87f86d1 100644
--- a/include/asm-arm/arch-msm/dma.h
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/dma.h
+/* arch/arm/mach-msm/include/mach/dma.h
  *
  * Copyright (C) 2007 Google, Inc.
  *
@@ -16,7 +16,7 @@
 #ifndef __ASM_ARCH_MSM_DMA_H
 
 #include <linux/list.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 struct msm_dmov_cmd {
 	struct list_head list;
diff --git a/include/asm-arm/arch-msm/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
index ee24aece4cb..d2259486bcb 100644
--- a/include/asm-arm/arch-msm/entry-macro.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-msm7200/entry-macro.S
+/* arch/arm/mach-msm7200/include/mach/entry-macro.S
  *
  * Copyright (C) 2007 Google, Inc.
  * Author: Brian Swetland <swetland@google.com>
@@ -14,7 +14,7 @@
  *
  */
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
  	.macro	disable_fiq
 	.endm
diff --git a/include/asm-arm/arch-msm/hardware.h b/arch/arm/mach-msm/include/mach/hardware.h
index 89af2b70182..2d126091ae4 100644
--- a/include/asm-arm/arch-msm/hardware.h
+++ b/arch/arm/mach-msm/include/mach/hardware.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/hardware.h
+/* arch/arm/mach-msm/include/mach/hardware.h
  *
  * Copyright (C) 2007 Google, Inc.
  *
diff --git a/include/asm-arm/arch-msm/io.h b/arch/arm/mach-msm/include/mach/io.h
index 4645ae26b62..c6a2feb268b 100644
--- a/include/asm-arm/arch-msm/io.h
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -1,4 +1,4 @@
-/* include/asm-arm/arch-msm/io.h
+/* arch/arm/mach-msm/include/mach/io.h
  *
  * Copyright (C) 2007 Google, Inc.
  *
diff --git a/include/asm-arm/arch-msm/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
index e62a108b185..9dd4cf8a269 100644
--- a/include/asm-arm/arch-msm/irqs.h
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/irqs.h
+/* arch/arm/mach-msm/include/mach/irqs.h
  *
  * Copyright (C) 2007 Google, Inc.
  * Author: Brian Swetland <swetland@google.com>
diff --git a/include/asm-arm/arch-msm/memory.h b/arch/arm/mach-msm/include/mach/memory.h
index b5ce0e9ac86..63fd47f2e62 100644
--- a/include/asm-arm/arch-msm/memory.h
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/memory.h
+/* arch/arm/mach-msm/include/mach/memory.h
  *
  * Copyright (C) 2007 Google, Inc.
  *
diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index b8955cc26fe..e221f58ceea 100644
--- a/include/asm-arm/arch-msm/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/msm_iomap.h
+/* arch/arm/mach-msm/include/mach/msm_iomap.h
  *
  * Copyright (C) 2007 Google, Inc.
  * Author: Brian Swetland <swetland@google.com>
diff --git a/include/asm-arm/arch-msm/system.h b/arch/arm/mach-msm/include/mach/system.h
index 7c5544bdd0c..f05ad2e0f23 100644
--- a/include/asm-arm/arch-msm/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/system.h
+/* arch/arm/mach-msm/include/mach/system.h
  *
  * Copyright (C) 2007 Google, Inc.
  *
@@ -13,7 +13,7 @@
  *
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 void arch_idle(void);
 
diff --git a/include/asm-arm/arch-msm/timex.h b/arch/arm/mach-msm/include/mach/timex.h
index 8724487ab4c..a62e6b215ae 100644
--- a/include/asm-arm/arch-msm/timex.h
+++ b/arch/arm/mach-msm/include/mach/timex.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/timex.h
+/* arch/arm/mach-msm/include/mach/timex.h
  *
  * Copyright (C) 2007 Google, Inc.
  *
diff --git a/include/asm-arm/arch-msm/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index e91ed786ffe..026e8955ace 100644
--- a/include/asm-arm/arch-msm/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/uncompress.h
+/* arch/arm/mach-msm/include/mach/uncompress.h
  *
  * Copyright (C) 2007 Google, Inc.
  *
diff --git a/include/asm-arm/arch-msm/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
index 60f8d910e82..05f81fd8623 100644
--- a/include/asm-arm/arch-msm/vmalloc.h
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/vmalloc.h
+/* arch/arm/mach-msm/include/mach/vmalloc.h
  *
  * Copyright (C) 2007 Google, Inc.
  *
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index c39edb994a8..5976200de99 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -19,13 +19,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #define MSM_DEVICE(name) { \
 		.virtual = MSM_##name##_BASE, \
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
index 24158040b78..66901baf8c8 100644
--- a/arch/arm/mach-msm/irq.c
+++ b/arch/arm/mach-msm/irq.c
@@ -21,11 +21,11 @@
 #include <linux/timer.h>
 
 #include <linux/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/io.h>
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 #define VIC_REG(off) (MSM_VIC_BASE + (off))
 
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index bd4732d1ab3..9f02d7dca98 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -22,7 +22,7 @@
 #include <linux/delay.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index d27b83b7bf6..953a26c469c 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -17,11 +17,11 @@
 #include <linux/ata_platform.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/mv78xx0.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/mv78xx0.h>
+#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 0c93d19193d..a2d0c978360 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "common.h"
diff --git a/include/asm-arm/arch-mv78xx0/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index d0595bd645e..a06442fbd34 100644
--- a/include/asm-arm/arch-mv78xx0/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -1,12 +1,12 @@
 /*
- * include/asm-arm/arch-mv78xx0/debug-macro.S
+ * arch/arm/mach-mv78xx0/include/mach/debug-macro.S
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-mv78xx0/dma.h b/arch/arm/mach-mv78xx0/include/mach/dma.h
index 40a8c178f10..40a8c178f10 100644
--- a/include/asm-arm/arch-mv78xx0/dma.h
+++ b/arch/arm/mach-mv78xx0/include/mach/dma.h
diff --git a/include/asm-arm/arch-mv78xx0/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
index e9a606b1266..ed4a46bcd3b 100644
--- a/include/asm-arm/arch-mv78xx0/entry-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-mv78xx0/entry-macro.S
+ * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for Marvell MV78xx0 platforms
  *
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/include/asm-arm/arch-mv78xx0/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h
index 8e17926086c..5d887557e12 100644
--- a/include/asm-arm/arch-mv78xx0/hardware.h
+++ b/arch/arm/mach-mv78xx0/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-mv78xx0/hardware.h
+ * arch/arm/mach-mv78xx0/include/mach/hardware.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
diff --git a/include/asm-arm/arch-mv78xx0/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h
index 415d4c98e3d..450e0e1ad09 100644
--- a/include/asm-arm/arch-mv78xx0/io.h
+++ b/arch/arm/mach-mv78xx0/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-mv78xx0/io.h
+ * arch/arm/mach-mv78xx0/include/mach/io.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
diff --git a/include/asm-arm/arch-mv78xx0/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
index 75930450cd6..995d7fb8d06 100644
--- a/include/asm-arm/arch-mv78xx0/irqs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-mv78xx0/irqs.h
+ * arch/arm/mach-mv78xx0/include/mach/irqs.h
  *
  * IRQ definitions for Marvell MV78xx0 SoCs
  *
diff --git a/include/asm-arm/arch-ep93xx/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
index 4b1a5c7c836..9e47a140ff7 100644
--- a/include/asm-arm/arch-ep93xx/memory.h
+++ b/arch/arm/mach-mv78xx0/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-ep93xx/memory.h
+ * arch/arm/mach-mv78xx0/include/mach/memory.h
  */
 
 #ifndef __ASM_ARCH_MEMORY_H
@@ -7,8 +7,8 @@
 
 #define PHYS_OFFSET		UL(0x00000000)
 
-#define __bus_to_virt(x)	__phys_to_virt(x)
 #define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
 
 
 #endif
diff --git a/include/asm-arm/arch-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 9f5d83c73fa..ad664178d6e 100644
--- a/include/asm-arm/arch-mv78xx0/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-mv78xx0/mv78xx0.h
+ * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
  *
  * Generic definitions for Marvell MV78xx0 SoC flavors:
  *  MV781x0 and MV782x0.
diff --git a/include/asm-arm/arch-kirkwood/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
index 8dde7e37985..7d517940883 100644
--- a/include/asm-arm/arch-kirkwood/system.h
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-kirkwood/system.h
+ * arch/arm/mach-mv78xx0/include/mach/system.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -9,8 +9,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/hardware.h>
+#include <mach/mv78xx0.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-mv78xx0/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h
index a854b1ccbd0..0e8c443c723 100644
--- a/include/asm-arm/arch-mv78xx0/timex.h
+++ b/arch/arm/mach-mv78xx0/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-mv78xx0/timex.h
+ * arch/arm/mach-mv78xx0/include/mach/timex.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
diff --git a/include/asm-arm/arch-mv78xx0/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
index 3bfe0a293ef..365264298e7 100644
--- a/include/asm-arm/arch-mv78xx0/uncompress.h
+++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-mv78xx0/uncompress.h
+ * arch/arm/mach-mv78xx0/include/mach/uncompress.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -7,7 +7,7 @@
  */
 
 #include <linux/serial_reg.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 
 #define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
 
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
new file mode 100644
index 00000000000..1c4954386a8
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 60f4ee4d453..28248d37b99 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,8 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <asm/arch/mv78xx0.h>
-#include <asm/plat-orion/irq.h>
+#include <mach/mv78xx0.h>
+#include <plat/irq.h>
 #include "common.h"
 
 void __init mv78xx0_init_irq(void)
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index b78e1443159..430ea84d587 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -12,7 +12,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 #include "common.h"
 
 struct pcie_port {
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 0a29ef29c73..c69896d011a 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -22,10 +22,9 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/common.h>
+#include <mach/clock.h>
+#include <mach/common.h>
 #include <asm/div64.h>
-#include <asm/mach-types.h>
 
 #include "crm_regs.h"
 
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index d6b5c2e3377..239308fe665 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -24,7 +24,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "crm_regs.h"
 
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
index a40a9b950ce..94644cd0a0f 100644
--- a/arch/arm/mach-mx2/crm_regs.h
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -20,7 +20,7 @@
 #ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
 #define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /* Register offsets */
 #define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a1f44c3c531..bd0559d5933 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -32,7 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Resource definition for the MXC IrDA
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 07875cf00de..dea6521d4d5 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -20,7 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index a9ff01fff13..4ce56ef4d8d 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,16 +23,16 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <asm/arch/common.h>
-#include <asm/hardware.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx1-mx2.h>
-#include <asm/arch/board-mx27ads.h>
+#include <mach/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx1-mx2.h>
+#include <mach/board-mx27ads.h>
 
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a9a28f58e71..1028f453cfc 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -21,12 +21,12 @@
 #include <linux/mtd/physmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
-#include <asm/arch/common.h>
-#include <asm/hardware.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx1-mx2.h>
 #include <asm/mach/time.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/board-pcm038.h>
+#include <mach/imx-uart.h>
+#include <mach/board-pcm038.h>
 
 /*
  * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 028ac4d3368..a560cd6ad23 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,8 +17,7 @@
  */
 
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 
 /*
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 570c02b8e5d..e31fd44f794 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -20,8 +20,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
index 99304645299..7b8269719d1 100644
--- a/arch/arm/mach-mx2/system.c
+++ b/arch/arm/mach-mx2/system.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 2f3635943e7..9f14a871ee7 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include <asm/div64.h>
 
 #include "crm_regs.h"
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 5c0320fce5b..e08c6a8ac56 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -21,8 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index adc51feefc1..3dda1fe23cb 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,9 +21,9 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx3.h>
 
 /*
  * IOMUX register (base) addresses
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 41dad485ded..30d842bd4d6 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -22,10 +22,10 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 /*!
  * @file mm.c
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index eba3e0cd428..60fb4e0d5ac 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -23,14 +23,14 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board-mx31ads.h>
+#include <mach/common.h>
+#include <mach/board-mx31ads.h>
 
 /*!
  * @file mx31ads.c
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 1372c1a1fc3..d363a6e79f8 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -23,15 +23,15 @@
 #include <linux/kernel.h>
 #include <linux/memory.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <asm/arch/board-mx31lite.h>
+#include <mach/board-mx31lite.h>
 
 /*
  * This file contains the board-specific initialization routines.
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index a34ae6de266..df8582a6231 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -23,15 +23,15 @@
 #include <linux/mtd/physmap.h>
 #include <linux/memory.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx3.h>
-#include <asm/arch/board-pcm037.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-pcm037.h>
 
 static struct physmap_flash_data pcm037_flash_data = {
 	.width  = 2,
@@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = {
 };
 
 static struct imxuart_platform_data uart_pdata = {
-	.flags = 0,
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index ef0ab6115c0..24c79650f9f 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -23,8 +23,8 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/arch/netx-regs.h>
-#include <asm/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/hardware.h>
 
 struct clk {};
 
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 99d4fb19a08..1b40483ea75 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -22,11 +22,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 #include <asm/io.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
 #include <asm/mach/irq.h>
 
 static struct map_desc netx_io_desc[] __initdata = {
diff --git a/include/asm-arm/arch-netx/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index a940d0e80cb..11b9d5b4639 100644
--- a/include/asm-arm/arch-netx/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-netx/debug-macro.S
+/* arch/arm/mach-netx/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-netx/dma.h b/arch/arm/mach-netx/include/mach/dma.h
index 4eda5feed81..690b3ebc43a 100644
--- a/include/asm-arm/arch-netx/dma.h
+++ b/arch/arm/mach-netx/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-netx/dma.h
+ *  arch/arm/mach-netx/include/mach/dma.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index 83ad188a084..a1952a0feda 100644
--- a/include/asm-arm/arch-netx/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/entry-macro.S
+ * arch/arm/mach-netx/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for Hilscher netX based platforms
  *
@@ -18,7 +18,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 		.macro  disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-netx/eth.h b/arch/arm/mach-netx/include/mach/eth.h
index 643c90ef8b7..88af1ac28ea 100644
--- a/include/asm-arm/arch-netx/eth.h
+++ b/arch/arm/mach-netx/include/mach/eth.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/eth.h
+ * arch/arm/mach-netx/include/mach/eth.h
  *
  * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h
index 7786c45455c..517a2bd3784 100644
--- a/include/asm-arm/arch-netx/hardware.h
+++ b/arch/arm/mach-netx/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/hardware.h
+ * arch/arm/mach-netx/include/mach/hardware.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/io.h b/arch/arm/mach-netx/include/mach/io.h
index a7a53f80165..468b92a8258 100644
--- a/include/asm-arm/arch-netx/io.h
+++ b/arch/arm/mach-netx/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-netx/io.h
+ *  arch/arm/mach-netx/include/mach/io.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h
index a487dc6e266..6ce914d54a3 100644
--- a/include/asm-arm/arch-netx/irqs.h
+++ b/arch/arm/mach-netx/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/irqs.h
+ * arch/arm/mach-netx/include/mach/irqs.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/memory.h b/arch/arm/mach-netx/include/mach/memory.h
index 6d8d2df3e99..53745a1378d 100644
--- a/include/asm-arm/arch-netx/memory.h
+++ b/arch/arm/mach-netx/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-netx/memory.h
+ *  arch/arm/mach-netx/include/mach/memory.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h
index fc9aa21f360..5104a00d40f 100644
--- a/include/asm-arm/arch-netx/netx-regs.h
+++ b/arch/arm/mach-netx/include/mach/netx-regs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/netx-regs.h
+ * arch/arm/mach-netx/include/mach/netx-regs.h
  *
  * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/param.h b/arch/arm/mach-netx/include/mach/param.h
index 7a80c26178a..a771459206a 100644
--- a/include/asm-arm/arch-netx/param.h
+++ b/arch/arm/mach-netx/include/mach/param.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-netx/param.h
+ *  arch/arm/mach-netx/include/mach/param.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/pfifo.h b/arch/arm/mach-netx/include/mach/pfifo.h
index 4af2ee4a32c..42c59068f8d 100644
--- a/include/asm-arm/arch-netx/pfifo.h
+++ b/arch/arm/mach-netx/include/mach/pfifo.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/pfifo.h
+ * arch/arm/mach-netx/include/mach/pfifo.h
  *
  * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/system.h b/arch/arm/mach-netx/include/mach/system.h
index 52adf368d76..27d8ef8e8e2 100644
--- a/include/asm-arm/arch-netx/system.h
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/system.h
+ * arch/arm/mach-netx/include/mach/system.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
@@ -20,7 +20,7 @@
 #define __ASM_ARCH_SYSTEM_H
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "netx-regs.h"
 
 static inline void arch_idle(void)
diff --git a/include/asm-arm/arch-netx/timex.h b/arch/arm/mach-netx/include/mach/timex.h
index 7fdb42da0b4..1120dd0ba39 100644
--- a/include/asm-arm/arch-netx/timex.h
+++ b/arch/arm/mach-netx/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/timex.h
+ * arch/arm/mach-netx/include/mach/timex.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
index f8943454710..84f91284f61 100644
--- a/include/asm-arm/arch-netx/uncompress.h
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-netx/uncompress.h
+ * arch/arm/mach-netx/include/mach/uncompress.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
index da2da5a595d..25d5cc676e0 100644
--- a/include/asm-arm/arch-netx/vmalloc.h
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-netx/vmalloc.h
+ *  arch/arm/mach-netx/include/mach/vmalloc.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/include/asm-arm/arch-netx/xc.h b/arch/arm/mach-netx/include/mach/xc.h
index 659af19512a..0c0011d4fc2 100644
--- a/include/asm-arm/arch-netx/xc.h
+++ b/arch/arm/mach-netx/include/mach/xc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-netx/xc.h
+ *  arch/arm/mach-netx/include/mach/xc.h
  *
  * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index e4a133d6284..c9b174bc8cc 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 7e26c42d1ac..15b54c62d60 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 53e10a9849f..1061c01ff67 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c
index 44dea61a9de..19ae0a72bea 100644
--- a/arch/arm/mach-netx/pfifo.c
+++ b/arch/arm/mach-netx/pfifo.c
@@ -22,9 +22,9 @@
 #include <linux/mutex.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/pfifo.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/pfifo.h>
 
 static DEFINE_MUTEX(pfifo_lock);
 
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index ea07b54afa5..ac8e5bfed69 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -22,10 +22,10 @@
 #include <linux/irq.h>
 #include <linux/clocksource.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
 
 /*
  * IRQ handler for the timer
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index ca9c5b61283..04c34e82fe6 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -23,10 +23,10 @@
 #include <linux/mutex.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
 
-#include <asm/arch/xc.h>
+#include <mach/xc.h>
 
 static DEFINE_MUTEX(xc_lock);
 
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index a494b71c019..a22a608a7ab 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -13,12 +13,12 @@
 #include <asm/mach/map.h>
 #include <asm/gpio.h>
 
-#include <asm/arch-ns9xxx/board.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
-#include <asm/arch-ns9xxx/regs-mem.h>
-#include <asm/arch-ns9xxx/regs-bbu.h>
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+#include <mach/board.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-bbu.h>
+#include <mach/regs-board-a9m9750dev.h>
 
 #include "board-a9m9750dev.h"
 
diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c
index cabfb879dda..377330c1b25 100644
--- a/arch/arm/mach-ns9xxx/gpio-ns9360.c
+++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c
@@ -14,8 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <asm/arch-ns9xxx/regs-bbu.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/regs-bbu.h>
+#include <mach/processor-ns9360.h>
 
 #include "gpio-ns9360.h"
 
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index b3c963b0c8f..804c3007596 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -13,9 +13,9 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 
-#include <asm/arch-ns9xxx/gpio.h>
-#include <asm/arch-ns9xxx/processor.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/gpio.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
 #include <asm/bug.h>
 #include <asm/types.h>
 #include <asm/bitops.h>
diff --git a/include/asm-arm/arch-ns9xxx/board.h b/arch/arm/mach-ns9xxx/include/mach/board.h
index e57443bdbbd..f7e9196eb9a 100644
--- a/include/asm-arm/arch-ns9xxx/board.h
+++ b/arch/arm/mach-ns9xxx/include/mach/board.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/board.h
+ * arch/arm/mach-ns9xxx/include/mach/board.h
  *
  * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index b21b93eb2db..c9530fba00a 100644
--- a/include/asm-arm/arch-ns9xxx/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/debug-macro.S
+ * arch/arm/mach-ns9xxx/include/mach/debug-macro.S
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
  *
@@ -7,9 +7,9 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+#include <mach/regs-board-a9m9750dev.h>
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-ns9xxx/dma.h b/arch/arm/mach-ns9xxx/include/mach/dma.h
index a67cbbe009c..3f50d8c9e5c 100644
--- a/include/asm-arm/arch-ns9xxx/dma.h
+++ b/arch/arm/mach-ns9xxx/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/dma.h
+ * arch/arm/mach-ns9xxx/include/mach/dma.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
index 89a21c53046..71ca0319b54 100644
--- a/include/asm-arm/arch-ns9xxx/entry-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/entry-macro.S
+ * arch/arm/mach-ns9xxx/include/mach/entry-macro.S
  *
  * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
@@ -8,8 +8,8 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
-#include <asm/hardware.h>
-#include <asm/arch-ns9xxx/regs-sys-common.h>
+#include <mach/hardware.h>
+#include <mach/regs-sys-common.h>
 
 		.macro	get_irqnr_preamble, base, tmp
 		ldr	\base, =SYS_ISRADDR
diff --git a/include/asm-arm/arch-ns9xxx/gpio.h b/arch/arm/mach-ns9xxx/include/mach/gpio.h
index adbca08583c..5eb34903257 100644
--- a/include/asm-arm/arch-ns9xxx/gpio.h
+++ b/arch/arm/mach-ns9xxx/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/gpio.h
+ * arch/arm/mach-ns9xxx/include/mach/gpio.h
  *
  * Copyright (C) 2007 by Digi International Inc.
  * All rights reserved.
diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/arch/arm/mach-ns9xxx/include/mach/hardware.h
index 0dca11ce21f..6dbb2030f56 100644
--- a/include/asm-arm/arch-ns9xxx/hardware.h
+++ b/arch/arm/mach-ns9xxx/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/hardware.h
+ * arch/arm/mach-ns9xxx/include/mach/hardware.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
diff --git a/include/asm-arm/arch-ns9xxx/io.h b/arch/arm/mach-ns9xxx/include/mach/io.h
index 6f82d28af12..027bf649645 100644
--- a/include/asm-arm/arch-ns9xxx/io.h
+++ b/arch/arm/mach-ns9xxx/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/io.h
+ * arch/arm/mach-ns9xxx/include/mach/io.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/arch/arm/mach-ns9xxx/include/mach/irqs.h
index e83d48ec42c..13483949e21 100644
--- a/include/asm-arm/arch-ns9xxx/irqs.h
+++ b/arch/arm/mach-ns9xxx/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/irqs.h
+ * arch/arm/mach-ns9xxx/include/mach/irqs.h
  *
  * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
diff --git a/include/asm-arm/arch-ns9xxx/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h
index ce1343e593e..649ee6235b9 100644
--- a/include/asm-arm/arch-ns9xxx/memory.h
+++ b/arch/arm/mach-ns9xxx/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/memory.h
+ * arch/arm/mach-ns9xxx/include/mach/memory.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
diff --git a/include/asm-arm/arch-ns9xxx/module.h b/arch/arm/mach-ns9xxx/include/mach/module.h
index ac08a31111e..f851a6b7da6 100644
--- a/include/asm-arm/arch-ns9xxx/module.h
+++ b/arch/arm/mach-ns9xxx/include/mach/module.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/module.h
+ * arch/arm/mach-ns9xxx/include/mach/module.h
  *
  * Copyright (C) 2007 by Digi International Inc.
  * All rights reserved.
diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
index f3aa6c50dbe..f41deda5129 100644
--- a/include/asm-arm/arch-ns9xxx/processor-ns9360.h
+++ b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/processor-ns9360.h
+ * arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
  *
  * Copyright (C) 2007 by Digi International Inc.
  * All rights reserved.
diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/arch/arm/mach-ns9xxx/include/mach/processor.h
index f7b53b65de8..9f77f746a38 100644
--- a/include/asm-arm/arch-ns9xxx/processor.h
+++ b/arch/arm/mach-ns9xxx/include/mach/processor.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/processor.h
+ * arch/arm/mach-ns9xxx/include/mach/processor.h
  *
  * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_PROCESSOR_H
 #define __ASM_ARCH_PROCESSOR_H
 
-#include <asm/arch-ns9xxx/module.h>
+#include <mach/module.h>
 
 #define processor_is_ns9210()	(0			\
 		|| module_is_cc7ucamry()		\
diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
index 7ee194dc635..af227c058fb 100644
--- a/include/asm-arm/arch-ns9xxx/regs-bbu.h
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/regs-bbu.h
+ * arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_REGSBBU_H
 #define __ASM_ARCH_REGSBBU_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /* BBus Utility */
 
diff --git a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
index afa3a9db3e1..cd1593693f5 100644
--- a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
+ * arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_REGSBOARDA9M9750_H
 #define __ASM_ARCH_REGSBOARDA9M9750_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define FPGA_UARTA_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0))
 #define FPGA_UARTB_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
index fb455a0ed84..f1625bf8cdc 100644
--- a/include/asm-arm/arch-ns9xxx/regs-mem.h
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/regs-mem.h
+ * arch/arm/mach-ns9xxx/include/mach/regs-mem.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_REGSMEM_H
 #define __ASM_ARCH_REGSMEM_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /* Memory Module */
 
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
index 956c57cb781..14f91dfd573 100644
--- a/include/asm-arm/arch-ns9xxx/regs-sys-common.h
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/regs-sys-common.h
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
  *
  * Copyright (C) 2007 by Digi International Inc.
  * All rights reserved.
@@ -11,7 +11,7 @@
 
 #ifndef __ASM_ARCH_REGSSYSCOMMON_H
 #define __ASM_ARCH_REGSSYSCOMMON_H
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /* Interrupt Vector Address Register Level x */
 #define SYS_IVA(x)	__REG2(0xa09000c4, (x))
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
index 318b6945afb..8ff254d9901 100644
--- a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
  *
  * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_REGSSYSNS9360_H
 #define __ASM_ARCH_REGSSYSNS9360_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /* System Control Module */
 
diff --git a/include/asm-arm/arch-ns9xxx/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h
index 1348073afe4..e2068c57415 100644
--- a/include/asm-arm/arch-ns9xxx/system.h
+++ b/arch/arm/mach-ns9xxx/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/system.h
+ * arch/arm/mach-ns9xxx/include/mach/system.h
  *
  * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
@@ -12,8 +12,8 @@
 #define __ASM_ARCH_SYSTEM_H
 
 #include <asm/proc-fns.h>
-#include <asm/arch-ns9xxx/processor.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-ns9xxx/timex.h b/arch/arm/mach-ns9xxx/include/mach/timex.h
index f776cbd2622..734a8d8bd57 100644
--- a/include/asm-arm/arch-ns9xxx/timex.h
+++ b/arch/arm/mach-ns9xxx/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/timex.h
+ * arch/arm/mach-ns9xxx/include/mach/timex.h
  *
  * Copyright (C) 2005-2006 by Digi International Inc.
  * All rights reserved.
@@ -12,7 +12,7 @@
 #define __ASM_ARCH_TIMEX_H
 
 /*
- * value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h.
+ * value for CLOCK_TICK_RATE stolen from arch/arm/mach-s3c2410/include/mach/timex.h.
  * See there for an explanation.
  */
 #define CLOCK_TICK_RATE         12000000
diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
index 71066baceab..5dbc3c5167c 100644
--- a/include/asm-arm/arch-ns9xxx/uncompress.h
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/uncompress.h
+ * arch/arm/mach-ns9xxx/include/mach/uncompress.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
diff --git a/include/asm-arm/arch-ns9xxx/vmalloc.h b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
index 2f3cb6f6be2..fe964d3bcc4 100644
--- a/include/asm-arm/arch-ns9xxx/vmalloc.h
+++ b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ns9xxx/vmalloc.h
+ * arch/arm/mach-ns9xxx/include/mach/vmalloc.h
  *
  * Copyright (C) 2006 by Digi International Inc.
  * All rights reserved.
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index ca85d24cf39..38260d5f849 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -12,10 +12,9 @@
 #include <linux/kernel_stat.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-#include <asm/arch-ns9xxx/regs-sys-common.h>
-#include <asm/arch-ns9xxx/irqs.h>
-#include <asm/arch-ns9xxx/board.h>
+#include <mach/regs-sys-common.h>
+#include <mach/irqs.h>
+#include <mach/board.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
index 9623fff6b3b..2858417d8d8 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
@@ -11,7 +11,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
 
 #include "board-a9m9750dev.h"
 #include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
index fcc815bdd29..729f68da429 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
@@ -11,7 +11,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
 
 #include "board-jscc9p9360.h"
 #include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c
index 5aa5d9baf8c..795b15e8982 100644
--- a/arch/arm/mach-ns9xxx/plat-serial8250.c
+++ b/arch/arm/mach-ns9xxx/plat-serial8250.c
@@ -11,8 +11,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
-#include <asm/arch-ns9xxx/board.h>
+#include <mach/regs-board-a9m9750dev.h>
+#include <mach/board.h>
 
 #define DRIVER_NAME "serial8250"
 
diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c
index 2bee0b7fccb..abee8338735 100644
--- a/arch/arm/mach-ns9xxx/processor-ns9360.c
+++ b/arch/arm/mach-ns9xxx/processor-ns9360.c
@@ -14,8 +14,8 @@
 
 #include <asm/page.h>
 #include <asm/mach/map.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
 
 void ns9360_reset(char mode)
 {
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 4d573c9793e..a63424d083d 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -15,10 +15,10 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
-#include <asm/arch-ns9xxx/irqs.h>
-#include <asm/arch/system.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/irqs.h>
+#include <mach/system.h>
 #include "generic.h"
 
 #define TIMER_CLOCKSOURCE 0
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8b102ad59c1..2e618391cc5 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -17,18 +17,18 @@
 #include <linux/input.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board-ams-delta.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/keypad.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 1bdb66638e2..db789461fca 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -20,21 +20,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/board-fsample.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/board-fsample.h>
 
 static int fsample_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c711bf23f7b..7d267020537 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -17,16 +17,16 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 6fdc78406b2..ab9ee5820c4 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 4b444fdaafe..3b65914b914 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -29,7 +29,7 @@
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -37,16 +37,16 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio-switch.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio-switch.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 66ecc437928..36085819098 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7fbaa8d648c..2ced6d9984d 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -31,7 +31,7 @@
 
 #include <asm/setup.h>
 #include <asm/page.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -39,18 +39,18 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpioexpander.h>
+#include <mach/irqs.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/dma.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 #define H3_TS_GPIO	48
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 4b8ae3ee0d0..cbc11be5cd2 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -24,21 +24,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 3f39e0e79c9..38d9783ac6d 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -20,21 +20,21 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/dsp_common.h>
-#include <asm/arch/aic23.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/lcd_mipid.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/dsp_common.h>
+#include <mach/aic23.h>
+#include <mach/omapfb.h>
+#include <mach/lcd_mipid.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 41f94f6fc15..3e766e49f7c 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -39,7 +39,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -47,12 +47,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/usb.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/usb.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -340,7 +340,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <asm/arch/keypad.h>
+#include <mach/keypad.h>
 
 static const int osk_keymap[] = {
 	/* KEY(col, row, code) */
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index a4d20127a60..b58043644a6 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -27,23 +27,23 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static void __init omap_palmte_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 2a033689f9f..40f9860a09d 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -23,24 +23,24 @@
 #include <linux/mtd/partitions.h>
 #include <linux/leds.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/led.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/led.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 34389b63b0e..e719294250b 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -26,23 +26,23 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 94bc0745ab2..b715917bfda 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -20,20 +20,20 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static int p2_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 8c93d47719e..0be4ebaa284 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,9 +12,9 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index e473fa6d4a5..130bcc6fd08 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -26,22 +26,22 @@
 #include <linux/i2c.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
-#include <asm/arch/keypad.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
+#include <mach/keypad.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 8948d45a276..213b4878710 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,17 +22,17 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
+#include <mach/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
 
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4ea2933f887..5965cf09f8c 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -21,10 +21,10 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/cpu.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/cpu.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index da8a3ac47e1..ab708d4c597 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,15 +14,14 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index d963125ed75..4449d86095f 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -22,13 +22,13 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 static void fpga_mask_irq(unsigned int irq)
 {
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 81c4e738506..2b9750b200c 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,8 +15,8 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
 
 extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 1da9d59a034..0ec6c1ec425 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -41,11 +41,11 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 8976fbb21f7..610f51f1874 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -14,13 +14,13 @@
 #include <linux/sched.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
index e7835d6f53a..9b99c289462 100644
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ b/arch/arm/mach-omap1/leds-innovator.c
@@ -3,7 +3,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 754383dde80..98e789622df 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -5,11 +5,11 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 3f9dcac4fd4..6cdad93c4a0 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -9,8 +9,8 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index bad1e7152d8..af44eab1ed2 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -13,8 +13,8 @@
 #include <linux/resource.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define MAILBOX_ARM2DSP1		0x00
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 2d2c2522b04..2baeaeb0c90 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -17,11 +17,11 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/dsp_common.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
@@ -159,6 +159,7 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #ifdef CONFIG_ARCH_OMAP730
 static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP730_MCBSP1_BASE,
 		.virt_base	= io_p2v(OMAP730_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -167,6 +168,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP730_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP730_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
@@ -184,6 +186,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP1510_MCBSP1_BASE,
 		.virt_base	= OMAP1510_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -193,6 +196,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 		},
 	{
+		.phys_base	= OMAP1510_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP1510_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
@@ -201,6 +205,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP1510_MCBSP3_BASE,
 		.virt_base	= OMAP1510_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
@@ -219,6 +224,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP1610_MCBSP1_BASE,
 		.virt_base	= OMAP1610_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -228,6 +234,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP1610_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP1610_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
@@ -236,6 +243,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP1610_MCBSP3_BASE,
 		.virt_base	= OMAP1610_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index e207bf7cb85..898516e362e 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 742f79e73bd..63c4ea18b1c 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -47,17 +47,16 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/cpu.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/dmtimer.h>
+
+#include <mach/cpu.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/tc.h>
+#include <mach/pm.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/dmtimer.h>
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 10a4fe88b2f..0e25a996bb4 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,12 +22,12 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/fpga.h>
 #ifdef CONFIG_PM
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 #endif
 
 static struct clk * uart1_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 68f5b39030b..f3eac932092 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -34,8 +34,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
 
 		.text
 
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 126d252062d..261cdc48228 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -10,8 +10,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 	.text
 
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 5d2b270935a..e54708595ec 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -45,7 +45,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index fbbdb806c95..e67760189d1 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,13 +46,13 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
 
 struct sys_timer omap_timer;
 
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1682eb77c46..b72ca13b3ac 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -22,17 +22,17 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
 
 #include <asm/io.h>
 
@@ -103,7 +103,7 @@ static struct resource sdp2430_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
 		.end	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 870b34972d3..989ad152d7f 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -29,19 +29,19 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/led.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/control.h>
+#include <mach/gpio.h>
+#include <mach/led.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index df8be081e15..9ba097868e7 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -20,16 +20,16 @@
 #include <linux/init.h>
 #include <linux/device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0d28f6897c8..9e2624ca70a 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -22,24 +22,24 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/gpmc.h>
+#include <mach/control.h>
+#include <mach/gpio.h>
+#include <mach/gpioexpander.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/irda.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/keypad.h>
+#include <mach/menelaus.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 15675bce801..1d891e4a693 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -25,9 +25,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/cpu.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/cpu.h>
 #include <asm/div64.h>
 
 #include "memory.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 3cd37cb57c5..626e5fa93b6 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -16,7 +16,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index aa567876651..295e671e9cf 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -28,8 +28,8 @@
 #include <linux/io.h>
 #include <linux/cpufreq.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 #include <asm/div64.h>
 #include <asm/bitops.h>
 
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 4263099b1ad..3ff74952f83 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -26,8 +26,8 @@
 #include <linux/io.h>
 #include <linux/limits.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 #include <asm/div64.h>
 #include <asm/bitops.h>
 
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 05757eb032b..ec664457a11 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #include "clock.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 51f70300996..5f3aad97784 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,8 +15,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/control.h>
+#include <mach/common.h>
+#include <mach/control.h>
 
 static void __iomem *omap2_ctrl_base;
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index b603bc5f8e5..7a7f0255907 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -14,15 +14,15 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
 
 #if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 
@@ -142,7 +142,7 @@ static inline void omap_init_sti(void) {}
 
 #if defined(CONFIG_SPI_OMAP24XX)
 
-#include <asm/arch/mcspi.h>
+#include <mach/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index dbf68dc50ae..f51d69bc457 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -18,7 +18,7 @@
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpmc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index dff4b16cead..a5d4526ac4d 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,8 +17,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/cpu.h>
+#include <mach/control.h>
+#include <mach/cpu.h>
 
 #if defined(CONFIG_ARCH_OMAP2420)
 #define TAP_BASE	io_p2v(0x48014000)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 69c8174f3aa..987351f07d7 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -21,8 +21,8 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/omapfb.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
 
 extern void omap_sram_init(void);
 extern int omap2_clk_init(void);
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index f064f725e72..9ef15b31d8f 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 4799561c5a9..a480b96948e 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define MAILBOX_REVISION		0x00
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 17cf199d113..b261f1f80b5 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,10 +17,10 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
 
 struct mcbsp_internal_clk {
 	struct clk clk;
@@ -134,6 +134,7 @@ static struct omap_mcbsp_ops omap2_mcbsp_ops = {
 #ifdef CONFIG_ARCH_OMAP24XX
 static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP24XX_MCBSP1_BASE,
 		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
@@ -143,6 +144,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP24XX_MCBSP2_BASE,
 		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
@@ -161,6 +163,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP34XX
 static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP34XX_MCBSP1_BASE,
 		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
@@ -170,6 +173,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP34XX_MCBSP2_BASE,
 		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 73cadb2c75c..6b49cc9cbdc 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -24,9 +24,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 
 #include "prm.h"
 
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 8f98b20f30a..443d07fef7f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -29,8 +29,8 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
+#include <mach/control.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index d6c9de82ca0..8671e1079ab 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -30,12 +30,11 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
 
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/pm.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/pm.h>
 
 static struct clk *vclk;
 static void (*omap2_sram_idle)(void);
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index fd92a80f38f..f945156d558 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -18,8 +18,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/prcm.h>
+#include <mach/common.h>
+#include <mach/prcm.h>
 
 #include "clock.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 1b1fe4f6e03..1a8bbd09406 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -15,7 +15,7 @@
  */
 #undef DEBUG
 
-#include <asm/arch/sdrc.h>
+#include <mach/sdrc.h>
 
 #ifndef __ASSEMBLER__
 extern void __iomem *omap2_sdrc_base;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index e9c367fc9f6..adc8a26a8fb 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -20,8 +20,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static struct clk * uart1_ick = NULL;
 static struct clk * uart1_fck = NULL;
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index 46ccb9b8b58..87a706fd5f8 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -23,8 +23,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
 
 #include "sdrc.h"
 
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 4c274510f3e..af4bd349022 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -24,8 +24,8 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 #include "prm.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index a3fa48dc08c..84363e269e8 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -24,8 +24,8 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 #include "prm.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 557603f9931..589393bedad 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -34,7 +34,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
 
 static struct omap_dm_timer *gptimer;
 static struct clock_event_device clockevent_gpt;
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 80bb42eb508..10ef464d6be 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -15,9 +15,9 @@
 
 #include <linux/usb/musb.h>
 
-#include <asm/arch/gpmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
 
 
 static u8		async_cs, sync_cs;
@@ -317,7 +317,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 		printk(error, 6, status);
 		return -ENODEV;
 	}
-	data->multipoint = 1;
 	tusb_device.dev.platform_data = data;
 
 	/* REVISIT let the driver know what DMA channels work */
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 6f0dbda6c44..bea37972120 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index faf4e321191..7b11e552bc5 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -24,11 +24,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
+#include <plat/ehci-orion.h>
+#include <plat/mv_xor.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -355,6 +356,103 @@ void __init orion5x_uart1_init(void)
 
 
 /*****************************************************************************
+ * XOR engine
+ ****************************************************************************/
+static struct resource orion5x_xor_shared_resources[] = {
+	{
+		.name	= "xor low",
+		.start	= ORION5X_XOR_PHYS_BASE,
+		.end	= ORION5X_XOR_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor high",
+		.start	= ORION5X_XOR_PHYS_BASE + 0x200,
+		.end	= ORION5X_XOR_PHYS_BASE + 0x2ff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device orion5x_xor_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(orion5x_xor_shared_resources),
+	.resource	= orion5x_xor_shared_resources,
+};
+
+static u64 orion5x_xor_dmamask = DMA_32BIT_MASK;
+
+static struct resource orion5x_xor0_resources[] = {
+	[0] = {
+		.start	= IRQ_ORION5X_XOR0,
+		.end	= IRQ_ORION5X_XOR0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data orion5x_xor0_data = {
+	.shared		= &orion5x_xor_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device orion5x_xor0_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(orion5x_xor0_resources),
+	.resource	= orion5x_xor0_resources,
+	.dev		= {
+		.dma_mask		= &orion5x_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&orion5x_xor0_data,
+	},
+};
+
+static struct resource orion5x_xor1_resources[] = {
+	[0] = {
+		.start	= IRQ_ORION5X_XOR1,
+		.end	= IRQ_ORION5X_XOR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data orion5x_xor1_data = {
+	.shared		= &orion5x_xor_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device orion5x_xor1_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(orion5x_xor1_resources),
+	.resource	= orion5x_xor1_resources,
+	.dev		= {
+		.dma_mask		= &orion5x_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&orion5x_xor1_data,
+	},
+};
+
+void __init orion5x_xor_init(void)
+{
+	platform_device_register(&orion5x_xor_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, orion5x_xor0_data.cap_mask);
+	dma_cap_set(DMA_XOR, orion5x_xor0_data.cap_mask);
+	platform_device_register(&orion5x_xor0_channel);
+
+	dma_cap_set(DMA_MEMCPY, orion5x_xor1_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, orion5x_xor1_data.cap_mask);
+	dma_cap_set(DMA_XOR, orion5x_xor1_data.cap_mask);
+	platform_device_register(&orion5x_xor1_channel);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 static void orion5x_timer_init(void)
@@ -382,6 +480,8 @@ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
 			*dev_name = "MV88F5281-D2";
 		} else if (*rev == MV88F5281_REV_D1) {
 			*dev_name = "MV88F5281-D1";
+		} else if (*rev == MV88F5281_REV_D0) {
+			*dev_name = "MV88F5281-D0";
 		} else {
 			*dev_name = "MV88F5281-Rev-Unsupported";
 		}
@@ -416,6 +516,15 @@ void __init orion5x_init(void)
 	 * Setup Orion address map
 	 */
 	orion5x_setup_cpu_mbus_bridge();
+
+	/*
+	 * Don't issue "Wait for Interrupt" instruction if we are
+	 * running on D0 5281 silicon.
+	 */
+	if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
+		printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
+		disable_hlt();
+	}
 }
 
 /*
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index f72cf0e7754..0bd195551a2 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -32,6 +32,7 @@ void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
+void orion5x_xor_init(void);
 
 /*
  * PCIe/PCI functions.
@@ -40,6 +41,7 @@ struct pci_bus;
 struct pci_sys_data;
 
 void orion5x_pcie_id(u32 *dev, u32 *rev);
+void orion5x_pci_disable(void);
 void orion5x_pci_set_cardbus_mode(void);
 int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 40a0bee4fbb..ff13e9060b1 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -24,8 +24,8 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/orion5x.h>
+#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 3791ca6f001..b38c65ccfb1 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -25,7 +25,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -245,12 +245,8 @@ static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
 static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("g760a", 0x3e),
-#if 0
-	/* this entry requires the new-style driver model lm75 driver,
-	 * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
 	}, {
-		I2C_BOARD_INFO("g751", 0x48),
-#endif
+		I2C_BOARD_INFO("lm75", 0x48),
 	}, {
 		I2C_BOARD_INFO("m41t80", 0x68),
 	},
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index d09797990f4..cd8a16f67d2 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/bitops.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 
 static DEFINE_SPINLOCK(gpio_lock);
diff --git a/include/asm-arm/arch-orion5x/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 4f98f3ba292..c7f808bfe27 100644
--- a/include/asm-arm/arch-orion5x/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/debug-macro.S
+ * arch/arm/mach-orion5x/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 
 	.macro  addruart,rx
 	mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-orion5x/dma.h b/arch/arm/mach-orion5x/include/mach/dma.h
index 40a8c178f10..40a8c178f10 100644
--- a/include/asm-arm/arch-orion5x/dma.h
+++ b/arch/arm/mach-orion5x/include/mach/dma.h
diff --git a/include/asm-arm/arch-orion5x/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
index d8ef54c0ee9..4351937035c 100644
--- a/include/asm-arm/arch-orion5x/entry-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/entry-macro.S
+ * arch/arm/mach-orion5x/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for Orion platforms
  *
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/include/asm-arm/arch-orion5x/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h
index c85e498388b..65dc136a86f 100644
--- a/include/asm-arm/arch-orion5x/gpio.h
+++ b/arch/arm/mach-orion5x/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/gpio.h
+ * arch/arm/mach-orion5x/include/mach/gpio.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/include/asm-arm/arch-orion5x/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h
index 5d2d8e0b563..e51aaf4bf2b 100644
--- a/include/asm-arm/arch-orion5x/hardware.h
+++ b/arch/arm/mach-orion5x/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/hardware.h
+ * arch/arm/mach-orion5x/include/mach/hardware.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-arm/arch-orion5x/io.h b/arch/arm/mach-orion5x/include/mach/io.h
index 59f1bc96a23..f24b2513f7f 100644
--- a/include/asm-arm/arch-orion5x/io.h
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/io.h
+ * arch/arm/mach-orion5x/include/mach/io.h
  *
  * Tzachi Perelstein <tzachi@marvell.com>
  *
diff --git a/include/asm-arm/arch-orion5x/irqs.h b/arch/arm/mach-orion5x/include/mach/irqs.h
index abdd61a4833..d5b0fbf6b96 100644
--- a/include/asm-arm/arch-orion5x/irqs.h
+++ b/arch/arm/mach-orion5x/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/irqs.h
+ * arch/arm/mach-orion5x/include/mach/irqs.h
  *
  * IRQ definitions for Orion SoC
  *
diff --git a/include/asm-arm/arch-orion5x/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
index 80053a7afc7..54dd76b013f 100644
--- a/include/asm-arm/arch-orion5x/memory.h
+++ b/arch/arm/mach-orion5x/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/memory.h
+ * arch/arm/mach-orion5x/include/mach/memory.h
  *
  * Marvell Orion memory definitions
  */
diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 10257f5c5e9..61eb74a8886 100644
--- a/include/asm-arm/arch-orion5x/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/orion5x.h
+ * arch/arm/mach-orion5x/include/mach/orion5x.h
  *
  * Generic definitions of Orion SoC flavors:
  *  Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
@@ -73,6 +73,7 @@
 #define MV88F5182_REV_A2	2
 /* Orion-2 (88F5281) */
 #define MV88F5281_DEV_ID	0x5281
+#define MV88F5281_REV_D0	4
 #define MV88F5281_REV_D1	5
 #define MV88F5281_REV_D2	6
 
@@ -105,6 +106,10 @@
 #define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
 #define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
 
+#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
+#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
+#define ORION5X_XOR_REG(x)		(ORION5X_XOR_VIRT_BASE | (x))
+
 #define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
 #define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
 #define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
diff --git a/include/asm-arm/arch-orion5x/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index 3f1d1e2d38f..08e43075789 100644
--- a/include/asm-arm/arch-orion5x/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/system.h
+ * arch/arm/mach-orion5x/include/mach/system.h
  *
  * Tzachi Perelstein <tzachi@marvell.com>
  *
@@ -11,8 +11,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-orion5x/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
index 31c568e28cc..e82e44db762 100644
--- a/include/asm-arm/arch-orion5x/timex.h
+++ b/arch/arm/mach-orion5x/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/timex.h
+ * arch/arm/mach-orion5x/include/mach/timex.h
  *
  * Tzachi Perelstein <tzachi@marvell.com>
  *
diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
index 7548cedf2d7..4322dba468a 100644
--- a/include/asm-arm/arch-orion5x/uncompress.h
+++ b/arch/arm/mach-orion5x/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion5x/uncompress.h
+ * arch/arm/mach-orion5x/include/mach/uncompress.h
  *
  * Tzachi Perelstein <tzachi@marvell.com>
  *
@@ -9,7 +9,7 @@
  */
 
 #include <linux/serial_reg.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 
 #define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
 
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
new file mode 100644
index 00000000000..7147a297e97
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END       0xfd800000
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 9ae3f6dc783..2545ff9e583 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -15,8 +15,8 @@
 #include <linux/irq.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/irq.h>
+#include <mach/orion5x.h>
+#include <plat/irq.h>
 #include "common.h"
 
 /*****************************************************************************
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 84feac4a1fe..e321ec33183 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -24,8 +24,8 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/orion5x.h>
+#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -146,8 +146,10 @@ static struct hw_pci kurobox_pro_pci __initdata = {
 
 static int __init kurobox_pro_pci_init(void)
 {
-	if (machine_is_kurobox_pro())
+	if (machine_is_kurobox_pro()) {
+		orion5x_pci_disable();
 		pci_common_init(&kurobox_pro_pci);
+	}
 
 	return 0;
 }
@@ -356,6 +358,7 @@ static void __init kurobox_pro_init(void)
 	orion5x_sata_init(&kurobox_pro_sata_data);
 	orion5x_uart0_init();
 	orion5x_uart1_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
 				   KUROBOX_PRO_NOR_BOOT_SIZE);
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index a48cadb0159..c04ab0e16ea 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 #include "mpp.h"
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 7ce9e407d9d..53ff1893b88 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -25,7 +25,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -239,6 +239,7 @@ static void __init mss2_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&mss2_sata_data);
 	orion5x_uart0_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
 	platform_device_register(&mss2_nor_flash);
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 55f3b0fdef8..978d4d59939 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -203,6 +203,7 @@ static void __init mv2120_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&mv2120_sata_data);
 	orion5x_uart0_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
 	platform_device_register(&mv2120_nor_flash);
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 256a4f68093..a7b7d77b1b0 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -14,7 +14,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -541,6 +541,13 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
 
+static int orion5x_pci_disabled __initdata;
+
+void __init orion5x_pci_disable(void)
+{
+	orion5x_pci_disabled = 1;
+}
+
 void __init orion5x_pci_set_cardbus_mode(void)
 {
 	orion5x_pci_cardbus_mode = 1;
@@ -553,7 +560,7 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
 	if (nr == 0) {
 		orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
 		ret = pcie_setup(sys);
-	} else if (nr == 1) {
+	} else if (nr == 1 && !orion5x_pci_disabled) {
 		orion5x_pci_set_bus_nr(sys->busnr);
 		ret = pci_setup(sys);
 	}
@@ -567,7 +574,7 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys
 
 	if (nr == 0) {
 		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
-	} else if (nr == 1) {
+	} else if (nr == 1 && !orion5x_pci_disabled) {
 		bus = pci_scan_bus(sys->busnr, &pci_ops, sys);
 	} else {
 		bus = NULL;
@@ -584,7 +591,7 @@ int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCIe endpoint?
 	 */
-	if (bus < orion5x_pci_local_bus_nr())
+	if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr())
 		return IRQ_ORION5X_PCIE0_INT;
 
 	return -1;
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index d50e3650a09..e72fe1e065e 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -15,12 +15,13 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -88,6 +89,8 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init rd88f5181l_fxo_init(void)
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index b56447d32e1..a1fe3257320 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -15,13 +15,14 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <linux/i2c.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -89,6 +90,8 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 2a46d27209c..4c3bcd76ac8 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -24,7 +24,7 @@
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -292,6 +292,7 @@ static void __init rd88f5182_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&rd88f5182_sata_data);
 	orion5x_uart0_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
 				   RD88F5182_NOR_BOOT_SIZE);
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index f270ada2def..9d689051419 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -26,7 +26,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 #include "tsx09-common.h"
@@ -207,12 +207,12 @@ static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
 
 static struct gpio_keys_button qnap_ts209_buttons[] = {
 	{
-		.code		= KEY_RESTART,
+		.code		= KEY_COPY,
 		.gpio		= QNAP_TS209_GPIO_KEY_MEDIA,
 		.desc		= "USB Copy Button",
 		.active_low	= 1,
 	}, {
-		.code		= KEY_POWER,
+		.code		= KEY_RESTART,
 		.gpio		= QNAP_TS209_GPIO_KEY_RESET,
 		.desc		= "Reset Button",
 		.active_low	= 1,
@@ -287,6 +287,10 @@ static void __init qnap_ts209_init(void)
 	/*
 	 * Configure peripherals.
 	 */
+	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+				   QNAP_TS209_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts209_nor_flash);
+
 	orion5x_ehci0_init();
 	orion5x_ehci1_init();
 	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
@@ -296,10 +300,8 @@ static void __init qnap_ts209_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&qnap_ts209_sata_data);
 	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
-				   QNAP_TS209_NOR_BOOT_SIZE);
-	platform_device_register(&qnap_ts209_nor_flash);
+	orion5x_uart1_init();
+	orion5x_xor_init();
 
 	platform_device_register(&qnap_ts209_button_device);
 
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 32f0ff073b7..d85588ac7ef 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -3,6 +3,9 @@
  *
  * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
  *
+ * Copyright (C) 2008  Sylver Bruneau <sylver.bruneau@gmail.com>
+ * Copyright (C) 2008  Martin Michlmayr <tbm@cyrius.com>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -16,6 +19,7 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
@@ -24,7 +28,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 #include "tsx09-common.h"
@@ -162,16 +166,59 @@ static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
 };
 
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+static struct gpio_led ts409_led_pins[] = {
+	{
+		.name		= "ts409:red:sata1",
+		.gpio		= 4,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata2",
+		.gpio		= 5,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata3",
+		.gpio		= 6,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata4",
+		.gpio		= 7,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led_platform_data ts409_led_data = {
+	.leds		= ts409_led_pins,
+	.num_leds	= ARRAY_SIZE(ts409_led_pins),
+};
+
+static struct platform_device ts409_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &ts409_led_data,
+	},
+};
+
 /****************************************************************************
  * GPIO Attached Keys
  *     Power button is attached to the PIC microcontroller
  ****************************************************************************/
 
+#define QNAP_TS409_GPIO_KEY_RESET	14
 #define QNAP_TS409_GPIO_KEY_MEDIA	15
 
 static struct gpio_keys_button qnap_ts409_buttons[] = {
 	{
 		.code		= KEY_RESTART,
+		.gpio		= QNAP_TS409_GPIO_KEY_RESET,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_COPY,
 		.gpio		= QNAP_TS409_GPIO_KEY_MEDIA,
 		.desc		= "USB Copy Button",
 		.active_low	= 1,
@@ -231,6 +278,10 @@ static void __init qnap_ts409_init(void)
 	/*
 	 * Configure peripherals.
 	 */
+	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
+				   QNAP_TS409_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts409_nor_flash);
+
 	orion5x_ehci0_init();
 	qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
 				 qnap_ts409_partitions[5].offset,
@@ -238,10 +289,7 @@ static void __init qnap_ts409_init(void)
 	orion5x_eth_init(&qnap_tsx09_eth_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
-				   QNAP_TS409_NOR_BOOT_SIZE);
-	platform_device_register(&qnap_ts409_nor_flash);
+	orion5x_uart1_init();
 
 	platform_device_register(&qnap_ts409_button_device);
 
@@ -255,6 +303,7 @@ static void __init qnap_ts409_init(void)
 	if (qnap_ts409_i2c_rtc.irq == 0)
 		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+	platform_device_register(&ts409_leds);
 
 	/* register tsx09 specific power-off method */
 	pm_power_off = qnap_tsx09_power_off;
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 77e9f351f07..ae0a5dccd2a 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -256,6 +256,7 @@ static void __init ts78xx_init(void)
 	orion5x_sata_init(&ts78xx_sata_data);
 	orion5x_uart0_init();
 	orion5x_uart1_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
 				   TS78XX_NOR_BOOT_SIZE);
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 1af093ff8cf..b6bc43e07ee 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -14,11 +14,12 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -92,6 +93,8 @@ static struct platform_device wnr854t_nor_flash = {
 
 static struct mv643xx_eth_platform_data wnr854t_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init wnr854t_init(void)
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index aeab55c6a82..b10da17b3fb 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -14,11 +14,12 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = {
 
 static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init wrt350n_v2_init(void)
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index a5268c3ac5a..24d036a24a7 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -21,10 +21,10 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include "clock.h"
 
 /*forward declaration*/
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 429c796938b..3ba46ede9bb 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -26,7 +26,7 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/irq.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dma.h>
+#include <mach/irq.h>
+#include <mach/clock.h>
+#include <mach/dma.h>
 
 struct resource spipnx_0_resources[] = {
 	{
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index fe152e82590..833c56be734 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -23,12 +23,12 @@
 #include <linux/clk.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 #include <asm/dma-mapping.h>
 #include <asm/io.h>
 #include <asm/mach/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index ef179cab80e..fb51f7279e9 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -18,8 +18,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <asm/io.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/gpio.h>
 
 /* register definitions */
 #define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index 6f308827c4f..87c093286ff 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -14,8 +14,8 @@
 #include <linux/i2c-pnx.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/i2c.h>
+#include <mach/platform.h>
+#include <mach/i2c.h>
 
 static int set_clock_run(struct platform_device *pdev)
 {
diff --git a/include/asm-arm/arch-pnx4008/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h
index ce155e16126..8d2a5ef52c9 100644
--- a/include/asm-arm/arch-pnx4008/clock.h
+++ b/arch/arm/mach-pnx4008/include/mach/clock.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pnx4008/clock.h
+ * arch/arm/mach-pnx4008/include/mach/clock.h
  *
  * Clock control driver for PNX4008 - header file
  *
diff --git a/include/asm-arm/arch-pnx4008/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 67d18a203d2..6d1407f319f 100644
--- a/include/asm-arm/arch-pnx4008/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-pnx4008/debug-macro.S
+/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-pnx4008/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
index 418f15283ff..5442d04fc57 100644
--- a/include/asm-arm/arch-pnx4008/dma.h
+++ b/arch/arm/mach-pnx4008/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pnx4008/dma.h
+ *  arch/arm/mach-pnx4008/include/mach/dma.h
  *
  *  PNX4008 DMA header file
  *
diff --git a/include/asm-arm/arch-pnx4008/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
index f11731974e5..8003037578e 100644
--- a/include/asm-arm/arch-pnx4008/entry-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pnx4008/entry-macro.S
+ * arch/arm/mach-pnx4008/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for PNX4008-based platforms
  *
diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio.h
index d01bf83d55c..9591467eb9e 100644
--- a/include/asm-arm/arch-pnx4008/gpio.h
+++ b/arch/arm/mach-pnx4008/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pnx4008/gpio.h
+ * arch/arm/mach-pnx4008/include/mach/gpio.h
  *
  * PNX4008 GPIO driver - header file
  *
diff --git a/include/asm-arm/arch-pnx4008/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h
index a4410397a92..7b98b828d36 100644
--- a/include/asm-arm/arch-pnx4008/hardware.h
+++ b/arch/arm/mach-pnx4008/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pnx4008/hardware.h
+ * arch/arm/mach-pnx4008/include/mach/hardware.h
  *
  * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
  *
@@ -21,7 +21,7 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 /* Start of virtual addresses for IO devices */
 #define IO_BASE         0xF0000000
diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h
index 92e8d65006f..259ac53abf4 100644
--- a/include/asm-arm/arch-pnx4008/i2c.h
+++ b/arch/arm/mach-pnx4008/include/mach/i2c.h
@@ -12,9 +12,6 @@
 #ifndef __ASM_ARCH_I2C_H__
 #define __ASM_ARCH_I2C_H__
 
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-
 enum {
 	mstatus_tdi = 0x00000001,
 	mstatus_afi = 0x00000002,
diff --git a/include/asm-arm/arch-pnx4008/io.h b/arch/arm/mach-pnx4008/include/mach/io.h
index 29ee43955c5..c6206f25839 100644
--- a/include/asm-arm/arch-pnx4008/io.h
+++ b/arch/arm/mach-pnx4008/include/mach/io.h
@@ -1,6 +1,6 @@
 
 /*
- *  include/asm-arm/arch-pnx4008/io.h
+ *  arch/arm/mach-pnx4008/include/mach/io.h
  *
  * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
  *
diff --git a/include/asm-arm/arch-pnx4008/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h
index fabff5dc337..2a690ca3387 100644
--- a/include/asm-arm/arch-pnx4008/irq.h
+++ b/arch/arm/mach-pnx4008/include/mach/irq.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pnx4008/irq.h
+ * arch/arm/mach-pnx4008/include/mach/irq.h
  *
  * PNX4008 IRQ controller driver - header file
  * this one is used in entry-arnv.S as well so it cannot contain C code
diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h
index a25d18f2d87..f6b33cf23ae 100644
--- a/include/asm-arm/arch-pnx4008/irqs.h
+++ b/arch/arm/mach-pnx4008/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pnx4008/irqs.h
+ * arch/arm/mach-pnx4008/include/mach/irqs.h
  *
  * PNX4008 IRQ controller driver - header file
  *
diff --git a/include/asm-arm/arch-pnx4008/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
index 0d8268a9526..5789a2d16f5 100644
--- a/include/asm-arm/arch-pnx4008/memory.h
+++ b/arch/arm/mach-pnx4008/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pnx4008/memory.h
+ * arch/arm/mach-pnx4008/include/mach/memory.h
  *
  * Copyright (c) 2005 Philips Semiconductors
  * Copyright (c) 2005 MontaVista Software, Inc.
diff --git a/include/asm-arm/arch-pnx4008/param.h b/arch/arm/mach-pnx4008/include/mach/param.h
index 95d5f547b41..6ea02f2176b 100644
--- a/include/asm-arm/arch-pnx4008/param.h
+++ b/arch/arm/mach-pnx4008/include/mach/param.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pnx4008/param.h
+ *  arch/arm/mach-pnx4008/include/mach/param.h
  *
  *  Copyright (C) 1999 ARM Limited
  *
diff --git a/include/asm-arm/arch-pnx4008/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h
index 2613c7c669b..368c2c10a30 100644
--- a/include/asm-arm/arch-pnx4008/platform.h
+++ b/arch/arm/mach-pnx4008/include/mach/platform.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pnx4008/platform.h
+ * arch/arm/mach-pnx4008/include/mach/platform.h
  *
  * PNX4008 Base addresses - header file
  *
diff --git a/include/asm-arm/arch-pnx4008/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h
index bac1634cb3e..2fa685bff85 100644
--- a/include/asm-arm/arch-pnx4008/pm.h
+++ b/arch/arm/mach-pnx4008/include/mach/pm.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pnx4008/pm.h
+ * arch/arm/mach-pnx4008/include/mach/pm.h
  *
  * PNX4008 Power Management Routiness - header file
  *
diff --git a/include/asm-arm/arch-pnx4008/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
index 6e3da70ab10..8985a4622b8 100644
--- a/include/asm-arm/arch-pnx4008/system.h
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pnx4008/system.h
+ * arch/arm/mach-pnx4008/include/mach/system.h
  *
  * Copyright (C) 2003 Philips Semiconductors
  * Copyright (C) 2005 MontaVista Software, Inc.
@@ -21,9 +21,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 static void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-pnx4008/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
index ee470a39089..956fbd8e977 100644
--- a/include/asm-arm/arch-pnx4008/timex.h
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pnx4008/timex.h
+ * arch/arm/mach-pnx4008/include/mach/timex.h
  *
  * PNX4008 timers header file
  *
@@ -14,7 +14,7 @@
 #ifndef __PNX4008_TIMEX_H
 #define __PNX4008_TIMEX_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #define CLOCK_TICK_RATE		1000000
diff --git a/include/asm-arm/arch-pnx4008/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h
index 8fa4d24b72b..bb4751ee253 100644
--- a/include/asm-arm/arch-pnx4008/uncompress.h
+++ b/arch/arm/mach-pnx4008/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pnx4008/uncompress.h
+ *  arch/arm/mach-pnx4008/include/mach/uncompress.h
  *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) 2006 MontaVista Software, Inc.
diff --git a/include/asm-arm/arch-pnx4008/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
index 140d925f6f3..2ad398378ae 100644
--- a/include/asm-arm/arch-pnx4008/vmalloc.h
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pnx4008/vmalloc.h
+ * arch/arm/mach-pnx4008/include/mach/vmalloc.h
  *
  * Author: Vitaly Wool <source@mvista.com>
  *
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 5ed67e1947a..5c4f55af5d4 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -23,17 +23,16 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irq.h>
+#include <mach/irq.h>
 
 static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
 
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index 40116d25434..f970906d884 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -20,10 +20,9 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/cacheflush.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/clock.h>
+#include <mach/pm.h>
+#include <mach/clock.h>
 
 #define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
 
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index 95a1b3f964a..9be84bbb30e 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -15,14 +15,14 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/platform.h>
-#include <asm/hardware.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
 
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #define UART_3		0
 #define UART_4		1
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
index fea1e17a365..f4eed495d29 100644
--- a/arch/arm/mach-pnx4008/sleep.S
+++ b/arch/arm/mach-pnx4008/sleep.S
@@ -13,7 +13,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
 #define PWR_CTRL_REG_OFFS 0x44
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 6d4ca8fc0cb..180975244f9 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -24,7 +24,7 @@
 #include <linux/irq.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
index 254892ac30c..5c67b188a3b 100644
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -19,7 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
-#include <asm/arch/akita.h>
+#include <mach/akita.h>
 
 /* MAX7310 Regiser Map */
 #define MAX7310_INPUT    0x00
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 630063ffa6f..ca8e2053815 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,9 +12,9 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/hardware.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -125,3 +125,28 @@ void clks_register(struct clk *clks, size_t num)
 		list_add(&clks[i].node, &clocks);
 	mutex_unlock(&clocks_mutex);
 }
+
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+	struct device *dev)
+{
+	struct clk *r = clk_lookup(dev, id);
+	struct clk *new;
+
+	if (!r)
+		return -ENODEV;
+
+	new = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	if (!new)
+		return -ENOMEM;
+
+	new->name = alias;
+	new->dev = alias_dev;
+	new->other = r;
+
+	mutex_lock(&clocks_mutex);
+	list_add(&new->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 1ec8f9178aa..73be795fe3b 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,3 +1,5 @@
+#include <linux/list.h>
+
 struct clk;
 
 struct clkops {
@@ -86,3 +88,6 @@ extern void clk_pxa3xx_cken_disable(struct clk *);
 #endif
 
 void clks_register(struct clk *clks, size_t num);
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+	struct device *dev);
+
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 31f5bd411ce..2d5bcea1e52 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 402e807eae5..af003a26953 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -23,14 +23,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/bitfield.h>
 
 #include <asm/hardware/it8152.h>
 
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 574839d7c13..abce13c846c 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -21,16 +21,16 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/colibri.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/colibri.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index e58504edb14..e703a8d209e 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,14 +35,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/corgi.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -532,6 +533,7 @@ static void __init corgi_init(void)
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
 
 	platform_scoop_config = &corgi_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 9328df37afd..311baf149b0 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -20,12 +20,12 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/corgi.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
+#include <mach/akita.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index e91c0f26c41..35bbfccd2df 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/corgi.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index eccc45d21f7..8e2f2215c4b 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -16,13 +16,13 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-ssp.h>
 #include "sharpsl.h"
 
 static DEFINE_SPINLOCK(corgi_ssp_lock);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index fb9ba1ab282..6f5569bac13 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -37,9 +37,9 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #ifdef DEBUG
 static unsigned int freq_debug;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 84489dc51d8..35736fc0863 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,19 +4,19 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/camera.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/gpio.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/camera.h>
+#include <mach/audio.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 3215316d7b0..c0be17e0ab8 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -20,10 +20,10 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
index 16c02363062..263884165f5 100644
--- a/arch/arm/mach-pxa/e400_lcd.c
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -14,8 +14,8 @@
 #include <linux/module.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxafb.h>
 
 static struct pxafb_mode_info e400_pxafb_mode_info = {
 	.pixclock       = 140703,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index e5cc6ca63c7..7a0a681a584 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -23,14 +23,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index c29b7b21c11..001a252bd51 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -10,18 +10,78 @@
  *
  */
 
+#include <linux/kernel.h>
 #include <linux/init.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
 #include <asm/mach-types.h>
 
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
 #include "generic.h"
 
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
-                      struct tag *tags, char **cmdline, struct meminfo *mi)
+	struct tag *tags, char **cmdline, struct meminfo *mi)
 {
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
@@ -32,83 +92,95 @@ static void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+}
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+}
+
 /* e-series machine definitions */
 
 #ifdef CONFIG_MACH_E330
 MACHINE_START(E330, "Toshiba e330")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E350
 MACHINE_START(E350, "Toshiba e350")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
-	.init_irq       = pxa25x_init_irq,
-	.fixup          = eseries_fixup,
-	.timer = &pxa_timer,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E750
 MACHINE_START(E750, "Toshiba e750")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E400
 MACHINE_START(E400, "Toshiba e400")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E800
 MACHINE_START(E800, "Toshiba e800")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
index 362847a1099..d622c04c0d4 100644
--- a/arch/arm/mach-pxa/eseries_udc.c
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -14,10 +14,10 @@
 #include <linux/init.h>
 #include <linux/device.h>
 
-#include <asm/arch/udc.h>
-#include <asm/arch/eseries-gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/udc.h>
+#include <mach/eseries-gpio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 0143eed6539..cc3d850cc0b 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -18,13 +18,13 @@
 #include <linux/pwm_backlight.h>
 
 #include <asm/setup.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/i2c.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
 
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ca053226fba..ceaed007636 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,15 +20,25 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 
+void clear_reset_status(unsigned int mask)
+{
+	if (cpu_is_pxa2xx())
+		pxa2xx_clear_reset_status(mask);
+
+	if (cpu_is_pxa3xx())
+		pxa3xx_clear_reset_status(mask);
+}
+
 /*
  * Get the clock frequency as reflected by CCCR and the turbo flag.
  * We assume these values have been applied via a fcs.
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 5bb7ae75783..041c048320e 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -47,12 +47,20 @@ extern unsigned pxa27x_get_memclk_frequency_10khz(void);
 #define pxa27x_get_memclk_frequency_10khz()	(0)
 #endif
 
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+extern void pxa2xx_clear_reset_status(unsigned int);
+#else
+static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
+#endif
+
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
 extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
+extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
 #define pxa3xx_get_memclk_frequency_10khz()	(0)
+static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 
 extern struct sysdev_class pxa_irq_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 7d3e16970be..07acc1b2385 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/sysdev.h>
 
 #include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index bdf23975403..c0092472fa5 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -34,13 +34,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/gumstix.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/gumstix.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 2637633f916..5aa0270d560 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -25,18 +25,18 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/idp.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/idp.h>
+#include <mach/pxafb.h>
+#include <mach/bitfield.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/include/asm-arm/arch-pxa/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
index 5d8cc1d9cb1..5d8cc1d9cb1 100644
--- a/include/asm-arm/arch-pxa/akita.h
+++ b/arch/arm/mach-pxa/include/mach/akita.h
diff --git a/include/asm-arm/arch-pxa/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
index f82f96dd105..f82f96dd105 100644
--- a/include/asm-arm/arch-pxa/audio.h
+++ b/arch/arm/mach-pxa/include/mach/audio.h
diff --git a/include/asm-arm/arch-pxa/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
index f1f0e3387d9..f1f0e3387d9 100644
--- a/include/asm-arm/arch-pxa/bitfield.h
+++ b/arch/arm/mach-pxa/include/mach/bitfield.h
diff --git a/include/asm-arm/arch-pxa/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
index 39516ced8b1..39516ced8b1 100644
--- a/include/asm-arm/arch-pxa/camera.h
+++ b/arch/arm/mach-pxa/include/mach/camera.h
diff --git a/include/asm-arm/arch-pxa/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 2ae373fb567..2ae373fb567 100644
--- a/include/asm-arm/arch-pxa/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
diff --git a/include/asm-arm/arch-pxa/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index bf856503baf..bf856503baf 100644
--- a/include/asm-arm/arch-pxa/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 9012cbc0ad8..55d6a175ab1 100644
--- a/include/asm-arm/arch-pxa/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-pxa/debug-macro.S
+/* arch/arm/mach-pxa/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-pxa/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index dbe110ee266..955bfe60606 100644
--- a/include/asm-arm/arch-pxa/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/dma.h
+ *  arch/arm/mach-pxa/include/mach/dma.h
  *
  *  Author:	Nicolas Pitre
  *  Created:	Jun 15, 2001
diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index c145bb01bc8..de16c12d523 100644
--- a/include/asm-arm/arch-pxa/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pxa/entry-macro.S
+ * arch/arm/mach-pxa/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for PXA-based platforms
  *
@@ -7,8 +7,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-pxa/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 4c90b131027..4c90b131027 100644
--- a/include/asm-arm/arch-pxa/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
diff --git a/include/asm-arm/arch-pxa/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
index f2a93d5e31d..f2a93d5e31d 100644
--- a/include/asm-arm/arch-pxa/eseries-irq.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h
diff --git a/include/asm-arm/arch-pxa/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index bdbf5f9ffdd..2c538d8c362 100644
--- a/include/asm-arm/arch-pxa/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/gpio.h
+ * arch/arm/mach-pxa/include/mach/gpio.h
  *
  * PXA GPIO wrappers for arch-neutral GPIO calls
  *
@@ -24,9 +24,9 @@
 #ifndef __ASM_ARCH_PXA_GPIO_H
 #define __ASM_ARCH_PXA_GPIO_H
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm-generic/gpio.h>
 
diff --git a/include/asm-arm/arch-pxa/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 6fa85c4f94f..42ee1956750 100644
--- a/include/asm-arm/arch-pxa/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/gumstix.h
+ *  arch/arm/mach-pxa/include/mach/gumstix.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-arm/arch-pxa/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 979a45695d7..e89df4d0d23 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/hardware.h
+ *  arch/arm/mach-pxa/include/mach/hardware.h
  *
  *  Author:	Nicolas Pitre
  *  Created:	Jun 15, 2001
@@ -224,11 +224,6 @@ extern void pxa_gpio_set_value(unsigned gpio, int value);
  */
 extern unsigned int get_memclk_frequency_10khz(void);
 
-/*
- * register GPIO as reset generator
- */
-extern int init_gpio_reset(int gpio);
-
 #endif
 
 #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
diff --git a/include/asm-arm/arch-pxa/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
index 80596b01344..80596b01344 100644
--- a/include/asm-arm/arch-pxa/i2c.h
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
diff --git a/include/asm-arm/arch-pxa/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
index 21aa8ac35c1..5eff96fcc94 100644
--- a/include/asm-arm/arch-pxa/idp.h
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/idp.h
+ *  arch/arm/mach-pxa/include/mach/idp.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-arm/arch-pxa/io.h b/arch/arm/mach-pxa/include/mach/io.h
index 7f8d817b446..600fd4f7660 100644
--- a/include/asm-arm/arch-pxa/io.h
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -1,12 +1,12 @@
 /*
- * linux/include/asm-arm/arch-pxa/io.h
+ * arch/arm/mach-pxa/include/mach/io.h
  *
  * Copied from asm/arch/sa1100/io.h
  */
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-pxa/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
index 0a50c3c763d..0a50c3c763d 100644
--- a/include/asm-arm/arch-pxa/irda.h
+++ b/arch/arm/mach-pxa/include/mach/irda.h
diff --git a/include/asm-arm/arch-pxa/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 9413121b0ed..108b5db9b2a 100644
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/irqs.h
+ *  arch/arm/mach-pxa/include/mach/irqs.h
  *
  *  Author:	Nicolas Pitre
  *  Created:	Jun 15, 2001
@@ -183,6 +183,7 @@
       defined(CONFIG_MACH_TOSA) || \
       defined(CONFIG_MACH_MAINSTONE) || \
       defined(CONFIG_MACH_PCM027) || \
+      defined(CONFIG_ARCH_PXA_ESERIES) || \
       defined(CONFIG_MACH_MAGICIAN)
 #define NR_IRQS			(IRQ_BOARD_END)
 #elif defined(CONFIG_MACH_ZYLONITE)
diff --git a/include/asm-arm/arch-pxa/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 79d209b826f..79d209b826f 100644
--- a/include/asm-arm/arch-pxa/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
diff --git a/include/asm-arm/arch-pxa/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index 501d240ac12..f89fb715266 100644
--- a/include/asm-arm/arch-pxa/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pxa/lpd270.h
+ * arch/arm/mach-pxa/include/mach/lpd270.h
  *
  * Author:	Lennert Buytenhek
  * Created:	Feb 10, 2006
diff --git a/include/asm-arm/arch-pxa/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 11ee73593fc..4cb24154a5a 100644
--- a/include/asm-arm/arch-pxa/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/lubbock.h
+ *  arch/arm/mach-pxa/include/mach/lubbock.h
  *
  *  Author:	Nicolas Pitre
  *  Created:	Jun 15, 2001
diff --git a/include/asm-arm/arch-pxa/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 169b374f992..38d68d99f58 100644
--- a/include/asm-arm/arch-pxa/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -12,7 +12,7 @@
 #ifndef _MAGICIAN_H_
 #define _MAGICIAN_H_
 
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 /*
  * PXA GPIOs
diff --git a/include/asm-arm/arch-pxa/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 14c862adcaa..3461c4302ff 100644
--- a/include/asm-arm/arch-pxa/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/mainstone.h
+ *  arch/arm/mach-pxa/include/mach/mainstone.h
  *
  *  Author:	Nicolas Pitre
  *  Created:	Nov 14, 2002
diff --git a/include/asm-arm/arch-pxa/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index bee81d66c18..552eb7fa657 100644
--- a/include/asm-arm/arch-pxa/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/memory.h
+ *  arch/arm/mach-pxa/include/mach/memory.h
  *
  * Author:	Nicolas Pitre
  * Copyright:	(C) 2001 MontaVista Software Inc.
diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 0499323010b..6c8e72238bf 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -1,8 +1,8 @@
 #ifndef __ASM_ARCH_MFP_PXA25X_H
 #define __ASM_ARCH_MFP_PXA25X_H
 
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
 
 /* GPIO */
 #define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index bc73ab84167..122bdbd5318 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -8,8 +8,8 @@
  * specific controller, and this should work in most cases.
  */
 
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
 
 /* GPIO */
 #define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index 8de1c0dae62..3e9211591e2 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_MFP_PXA2XX_H
 #define __ASM_ARCH_MFP_PXA2XX_H
 
-#include <asm/arch/mfp.h>
+#include <mach/mfp.h>
 
 /*
  * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index bb410313556..bc1fb33a6e7 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/mfp-pxa300.h
+ * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
  *
  * PXA300/PXA310 specific MFP configuration definitions
  *
@@ -15,8 +15,8 @@
 #ifndef __ASM_ARCH_MFP_PXA300_H
 #define __ASM_ARCH_MFP_PXA300_H
 
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 576aa46d90f..74990510cf3 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/mfp-pxa320.h
+ * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
  *
  * PXA320 specific MFP configuration definitions
  *
@@ -15,8 +15,8 @@
 #ifndef __ASM_ARCH_MFP_PXA320_H
 #define __ASM_ARCH_MFP_PXA320_H
 
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
diff --git a/include/asm-arm/arch-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
index 1f6b35c015d..1f6b35c015d 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
diff --git a/include/asm-arm/arch-pxa/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index c4e945ab192..fabd9b4df82 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/mfp-pxa930.h
+ * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
  *
  * PXA930 specific MFP configuration definitions
  *
@@ -13,8 +13,8 @@
 #ifndef __ASM_ARCH_MFP_PXA9xx_H
 #define __ASM_ARCH_MFP_PXA9xx_H
 
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
diff --git a/include/asm-arm/arch-pxa/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index e7d58798da6..8769567b389 100644
--- a/include/asm-arm/arch-pxa/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/mfp.h
+ * arch/arm/mach-pxa/include/mach/mfp.h
  *
  * Multi-Function Pin Definitions
  *
diff --git a/include/asm-arm/arch-pxa/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
index 6d1304c9270..6d1304c9270 100644
--- a/include/asm-arm/arch-pxa/mmc.h
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
diff --git a/include/asm-arm/arch-pxa/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 8704dbceb43..4d452fcb150 100644
--- a/include/asm-arm/arch-pxa/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -10,14 +10,12 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
  */
 
 #ifndef __ARCH_PXA_MTD_XIP_H__
 #define __ARCH_PXA_MTD_XIP_H__
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #define xip_irqpending()	(ICIP & ICMR)
 
diff --git a/include/asm-arm/arch-pxa/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
index e848a47128c..e848a47128c 100644
--- a/include/asm-arm/arch-pxa/ohci.h
+++ b/arch/arm/mach-pxa/include/mach/ohci.h
diff --git a/include/asm-arm/arch-pxa/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1e8bccbda51..1e8bccbda51 100644
--- a/include/asm-arm/arch-pxa/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
diff --git a/include/asm-arm/arch-pxa/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 7beae1472c3..4dcd2e8baa6 100644
--- a/include/asm-arm/arch-pxa/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/pcm027.h
+ * arch/arm/mach-pxa/include/mach/pcm027.h
  *
  * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
  * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index 2e201317906..8a4383b776d 100644
--- a/include/asm-arm/arch-pxa/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-pxa/pcm990_baseboard.h
+ * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
  *
  * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
  * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
@@ -19,7 +19,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <asm/arch/pcm027.h>
+#include <mach/pcm027.h>
 
 /*
  * definitions relevant only when the PCM-990
diff --git a/include/asm-arm/arch-pxa/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index 261e5bc958d..261e5bc958d 100644
--- a/include/asm-arm/arch-pxa/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
diff --git a/include/asm-arm/arch-pxa/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 4d6a4031576..67debc47e8c 100644
--- a/include/asm-arm/arch-pxa/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -1,11 +1,11 @@
 /*
- * linux/include/asm-arm/arch-pxa/poodle.h
+ * arch/arm/mach-pxa/include/mach/poodle.h
  *
  * May be copied or modified under the terms of the GNU General Public
  * License.  See linux/COPYING for more information.
  *
  * Based on:
- *   linux/include/asm-arm/arch-sa1100/collie.h
+ *   arch/arm/mach-sa1100/include/mach/collie.h
  *
  * ChangeLog:
  *   04-06-2001 Lineo Japan, Inc.
@@ -70,6 +70,12 @@
 #define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
 #define POODLE_SCOOP_IO_OUT	( 0 )
 
+#define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
+#define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
+#define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
+#define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
+#define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
+
 extern struct platform_device poodle_locomo_device;
 
 #endif /* __ASM_ARCH_POODLE_H  */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index dce9308626b..12288ca3cbb 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/pxa-regs.h
+ *  arch/arm/mach-pxa/include/mach/pxa-regs.h
  *
  *  Author:	Nicolas Pitre
  *  Created:	Jun 15, 2001
@@ -829,7 +829,7 @@
  */
 
 /*
- * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
+ * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
  */
 
 /*
@@ -837,7 +837,7 @@
  */
 
 /*
- * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
+ * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
  */
 
 #ifdef CONFIG_PXA27x
diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
index 1b80a4805a6..1b80a4805a6 100644
--- a/include/asm-arm/arch-pxa/pxa25x-udc.h
+++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
index ab1443f8bd8..ab1443f8bd8 100644
--- a/include/asm-arm/arch-pxa/pxa27x-udc.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
index d5a48a96dea..d5a48a96dea 100644
--- a/include/asm-arm/arch-pxa/pxa27x_keypad.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
index 6ef1dd09970..6ef1dd09970 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 73e0a329cf7..806ecfea44b 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/pxa2xx-regs.h
+ *  arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
  *
  *  Taken from pxa-regs.h by Russell King
  *
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
index 2206cb61a9f..2206cb61a9f 100644
--- a/include/asm-arm/arch-pxa/pxa2xx_spi.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index fe9364c83a2..39eb68319e2 100644
--- a/include/asm-arm/arch-pxa/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h
+ * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
  *
  * PXA3xx specific register definitions
  *
diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
index eb4b190b665..eb4b190b665 100644
--- a/include/asm-arm/arch-pxa/pxa3xx_nand.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
diff --git a/include/asm-arm/arch-pxa/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index daf018d0c60..8e591118371 100644
--- a/include/asm-arm/arch-pxa/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-pxa/pxafb.h
+ *  arch/arm/mach-pxa/include/mach/pxafb.h
  *
  *  Support for the xscale frame buffer.
  *
@@ -13,7 +13,7 @@
  */
 
 #include <linux/fb.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-lcd.h>
 
 /*
  * Supported LCD connections
@@ -28,6 +28,7 @@
  * bits 10-17 : for AC Bias Pin Frequency
  * bit     18 : for output enable polarity
  * bit     19 : for pixel clock edge
+ * bit     20 : for output pixel format when base is RGBT16
  */
 #define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
 #define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
@@ -53,10 +54,11 @@
 #define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
 
 #define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH	(0 << 17)
-#define LCD_BIAS_ACTIVE_LOW	(1 << 17)
-#define LCD_PCLK_EDGE_RISE	(0 << 18)
-#define LCD_PCLK_EDGE_FALL	(1 << 18)
+#define LCD_BIAS_ACTIVE_HIGH	(0 << 18)
+#define LCD_BIAS_ACTIVE_LOW	(1 << 18)
+#define LCD_PCLK_EDGE_RISE	(0 << 19)
+#define LCD_PCLK_EDGE_FALL	(1 << 19)
+#define LCD_ALTERNATE_MAPPING	(1 << 20)
 
 /*
  * This structure describes the machine which we are running on.
diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
index 820a189684a..c689c4ea769 100644
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_REGS_LCD_H
 #define __ASM_ARCH_REGS_LCD_H
 
-#include <asm/arch/bitfield.h>
+#include <mach/bitfield.h>
 
 /*
  * LCD Controller Registers and Bits Definitions
diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
index 3c04cde2cf1..3c04cde2cf1 100644
--- a/include/asm-arm/arch-pxa/regs-ssp.h
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
new file mode 100644
index 00000000000..9489a48871a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
+#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Low Power/Sleep Exit */
+#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
+#define RESET_STATUS_ALL	(0xf)
+
+extern unsigned int reset_status;
+extern void clear_reset_status(unsigned int mask);
+
+/*
+ * register GPIO as reset generator
+ */
+extern int init_gpio_reset(int gpio);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
index 3b1d4a72d4d..3b1d4a72d4d 100644
--- a/include/asm-arm/arch-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl.h
diff --git a/include/asm-arm/arch-pxa/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index bd14365f7ed..bd14365f7ed 100644
--- a/include/asm-arm/arch-pxa/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
diff --git a/include/asm-arm/arch-pxa/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
index a012882c9ee..a012882c9ee 100644
--- a/include/asm-arm/arch-pxa/ssp.h
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
diff --git a/include/asm-arm/arch-pxa/system.h b/arch/arm/mach-pxa/include/mach/system.h
index 6956fc5235f..0f381e69299 100644
--- a/include/asm-arm/arch-pxa/system.h
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/system.h
+ * arch/arm/mach-pxa/include/mach/system.h
  *
  * Author:	Nicolas Pitre
  * Created:	Jun 15, 2001
diff --git a/include/asm-arm/arch-pxa/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
index 8d882f0b6a1..b05fc6683c4 100644
--- a/include/asm-arm/arch-pxa/timex.h
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/timex.h
+ * arch/arm/mach-pxa/include/mach/timex.h
  *
  * Author:	Nicolas Pitre
  * Created:	Jun 15, 2001
diff --git a/include/asm-arm/arch-pxa/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index a72803f0461..a72803f0461 100644
--- a/include/asm-arm/arch-pxa/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/arch/arm/mach-pxa/include/mach/tosa_bt.h
index efc3c3d3b75..efc3c3d3b75 100644
--- a/include/asm-arm/arch-pxa/tosa_bt.h
+++ b/arch/arm/mach-pxa/include/mach/tosa_bt.h
diff --git a/include/asm-arm/arch-pxa/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index 641d0ec110b..641d0ec110b 100644
--- a/include/asm-arm/arch-pxa/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
diff --git a/include/asm-arm/arch-pxa/udc.h b/arch/arm/mach-pxa/include/mach/udc.h
index 27aa3a91012..2f82332e81a 100644
--- a/include/asm-arm/arch-pxa/udc.h
+++ b/arch/arm/mach-pxa/include/mach/udc.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/udc.h
+ * arch/arm/mach-pxa/include/mach/udc.h
  *
  */
 #include <asm/mach/udc_pxa2xx.h>
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index f4551269aaf..21e3e890af9 100644
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/uncompress.h
+ * arch/arm/mach-pxa/include/mach/uncompress.h
  *
  * Author:	Nicolas Pitre
  * Copyright:	(C) 2001 MontaVista Software Inc.
@@ -10,7 +10,7 @@
  */
 
 #include <linux/serial_reg.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #define __REG(x)       ((volatile unsigned long *)x)
diff --git a/include/asm-arm/arch-pxa/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
index 5bb450c7aa2..e90c5eeb81d 100644
--- a/include/asm-arm/arch-pxa/vmalloc.h
+++ b/arch/arm/mach-pxa/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-pxa/vmalloc.h
+ * arch/arm/mach-pxa/include/mach/vmalloc.h
  *
  * Author:	Nicolas Pitre
  * Copyright:	(C) 2001 MontaVista Software Inc.
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index 0d35ca04731..0d35ca04731 100644
--- a/include/asm-arm/arch-pxa/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index fbff557bb22..5e95c5372fe 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,10 +17,10 @@
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index 38aa9270540..18b20d46941 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -14,12 +14,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/idp.h>
+#include <mach/pxa-regs.h>
+#include <mach/idp.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index afbc6698e27..1a258029c33 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -13,11 +13,11 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 065293eb0d8..95e06b84963 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -12,12 +12,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
index 21880daabaf..3bc29007df3 100644
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -12,14 +12,14 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/types.h>
 #include <asm/leds.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index dd759d03a9f..58f3402a037 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -26,21 +26,21 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa3xx_nand.h>
-#include <asm/arch/littleton.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/ssp.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
+#include <mach/littleton.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 8d1ab54e7b2..b7038948d1d 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -29,7 +29,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -38,15 +38,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/lpd270.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/lpd270.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index af7375bb46a..4ffdff2d9ff 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -25,12 +25,12 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -41,17 +41,18 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/lubbock.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/audio.h>
+#include <mach/lubbock.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long lubbock_pin_config[] __initdata = {
@@ -224,7 +225,7 @@ static struct platform_device sa1111_device = {
  * for the temperature sensors.
  */
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 0,
+	.num_chipselect	= 1,
 };
 
 static int lubbock_ads7846_pendown_state(void)
@@ -485,6 +486,7 @@ static void __init lubbock_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
 
+	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c9d274f0048..143f28adaf9 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -26,18 +26,18 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/magician.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/magician.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index c8e38b5ff1c..d44af761564 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -32,7 +32,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -41,17 +41,17 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/mainstone.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/mainstone.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index fd4545eab80..925575f10ac 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,10 +18,10 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 3a5b0fcbaf1..eb197a6e8e9 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-#include <asm/arch/pxa3xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/pxa3xx-regs.h>
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 408657a24f8..fe924a23deb 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -30,15 +30,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/audio.h>
-#include <asm/arch/palmtx.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/udc.h>
+#include <mach/audio.h>
+#include <mach/palmtx.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 377f3be8ce5..730b9f6ede1 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -29,12 +29,12 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/pcm027.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pcm027.h>
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 30023b00e47..420c9b3813f 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -22,23 +22,22 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/ide.h>
 #include <linux/i2c.h>
 #include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/camera.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
 #include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pcm990_baseboard.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pcm990_baseboard.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa27x.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 7d4debbdcca..1b539e67557 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -16,12 +16,12 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 #include <asm/mach/time.h>
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 39612cfa0b4..3f5f484549b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -21,7 +21,7 @@
 #include <linux/pm.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -31,16 +31,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/poodle.h>
+#include <mach/pxafb.h>
+#include <mach/sharpsl.h>
+#include <mach/ssp.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -387,6 +388,7 @@ static void __init poodle_init(void)
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
 
 	platform_scoop_config = &poodle_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index ce28cd9fed1..316cd986da5 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,7 @@
 #include <linux/pwm.h>
 
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index c5b845b935b..305452b56e9 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,13 +23,14 @@
 #include <linux/suspend.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -165,8 +166,7 @@ static struct clk pxa25x_hwuart_clk =
 ;
 
 /*
- * PXA 2xx clock declarations. Order is important (see aliases below)
- * Please be careful not to disrupt the ordering.
+ * PXA 2xx clock declarations.
  */
 static struct clk pxa25x_clks[] = {
 	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
@@ -193,11 +193,6 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
 
-static struct clk pxa2xx_clk_aliases[] = {
-	INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
-	INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
-};
-
 #ifdef CONFIG_PM
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
@@ -348,6 +343,9 @@ static int __init pxa25x_init(void)
 		clks_register(&pxa25x_hwuart_clk, 1);
 
 	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+
+		reset_status = RCSR;
+
 		clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
 
 		if ((ret = pxa_init_dma(16)))
@@ -371,8 +369,6 @@ static int __init pxa25x_init(void)
 	if (cpu_is_pxa255())
 		ret = platform_device_register(&pxa_device_hwuart);
 
-	clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
-
 	return ret;
 }
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d5d14ea33f2..f9f6a9c31f4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -18,16 +18,17 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/i2c.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -384,6 +385,9 @@ static int __init pxa27x_init(void)
 	int i, ret = 0;
 
 	if (cpu_is_pxa27x()) {
+
+		reset_status = RCSR;
+
 		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
 
 		if ((ret = pxa_init_dma(32)))
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index d4f6415e841..73d04d81c75 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -14,9 +14,18 @@
 #include <linux/kernel.h>
 #include <linux/device.h>
 
-#include <asm/arch/mfp-pxa2xx.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+
+void pxa2xx_clear_reset_status(unsigned int mask)
+{
+	/* RESET_STATUS_* has a 1:1 mapping with RCSR */
+	RCSR = mask;
+}
 
 static unsigned long pxa2xx_mfp_fir[] = {
 	GPIO46_FICP_RXD,
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index da92e973388..9adc7fc4618 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa300.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -90,7 +90,9 @@ static struct clk common_clks[] = {
 };
 
 static struct clk pxa310_clks[] = {
+#ifdef CONFIG_CPU_PXA310
 	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+#endif
 };
 
 static int __init pxa300_init(void)
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index c557c23a1ef..016eb18f01a 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -17,10 +17,10 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa320.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index f491025a0c8..03cbc38103e 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,12 +22,13 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/ssp.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/ssp.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -109,6 +110,12 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void)
 	return (clk / 10000);
 }
 
+void pxa3xx_clear_reset_status(unsigned int mask)
+{
+	/* RESET_STATUS_* has a 1:1 mapping with ARSR */
+	ARSR = mask;
+}
+
 /*
  * Return the current AC97 clock frequency.
  */
@@ -532,6 +539,9 @@ static int __init pxa3xx_init(void)
 	int i, ret = 0;
 
 	if (cpu_is_pxa3xx()) {
+
+		reset_status = ARSR;
+
 		/*
 		 * clear RDH bit every time after reset
 		 *
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 9503897d049..13e6bfdfff6 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -16,8 +16,8 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/mfp-pxa930.h>
 
 static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 9d39dea57ce..9996c612c3d 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -10,8 +10,11 @@
 #include <asm/io.h>
 #include <asm/proc-fns.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
+
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
 
 static void do_hw_reset(void);
 
@@ -77,8 +80,7 @@ static void do_hw_reset(void)
 
 void arch_reset(char mode)
 {
-	if (cpu_is_pxa2xx())
-		RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+	clear_reset_status(RESET_STATUS_ALL);
 
 	switch (mode) {
 	case 's':
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index d02bc6f8bb9..e7ea91ce7f0 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -21,9 +21,9 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 23e9b928330..e804ae09370 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -22,12 +22,12 @@
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
 #include "sharpsl.h"
 
 struct battery_thresh spitz_battery_levels_acin[] = {
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 784716eb7fc..a62c8375eb5 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -13,10 +13,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
 #define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 762249c03de..b569f3b4cf3 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,18 +35,20 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/reset.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -573,6 +575,7 @@ static void __init common_init(void)
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
 	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
+	pxa_set_i2c_info(NULL);
 }
 
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 360354084ae..8a40505dfd2 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 89f38683787..9bd93c5f28b 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -31,10 +31,10 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/hardware.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
 
 #define TIMEOUT 100000
 
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 40bb70eff3f..f3821cfda72 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -11,10 +11,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 		.text
 
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ac283507e42..589d32b4fc4 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -21,9 +21,9 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 7b7c0179795..67e18509d7b 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,7 +22,7 @@
 #include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 /*
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index 7d8505466e5..fb0294bd431 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -16,7 +16,7 @@
 #include <linux/delay.h>
 #include <linux/rfkill.h>
 
-#include <asm/arch/tosa_bt.h>
+#include <mach/tosa_bt.h>
 
 static void tosa_bt_on(struct tosa_bt_data *data)
 {
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index fea17ce6b55..9f3ef9eb32e 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -34,21 +34,23 @@
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/tosa_bt.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long tosa_pin_config[] = {
@@ -520,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = {
 		.wakeup	= 1,
 		.active_low = 1,
 	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= TOSA_GPIO_EAR_IN,
+		.desc	= "HeadPhone insert",
+		.active_low = 1,
+		.debounce_interval = 300,
+	},
 };
 
 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
@@ -791,6 +801,8 @@ static void __init tosa_init(void)
 	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;
 
+	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 12811b7aea0..3ed757e6bcc 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -31,7 +31,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,15 +40,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 8fca6d890b7..0cb65b5772f 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -23,14 +23,14 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/zylonite.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index b28d46e081d..095f5c64823 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -20,9 +20,9 @@
 #include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/zylonite.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/i2c.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 2b7fba7a292..9879d7da2df 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mfp-pxa320.h>
-#include <asm/arch/zylonite.h>
+#include <mach/gpio.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 131990d196f..4f9c84ab781 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -29,7 +29,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/include/asm-arm/arch-realview/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 206f7a75288..8d699fd324d 100644
--- a/include/asm-arm/arch-realview/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-realview/board-eb.h
+ * arch/arm/mach-realview/include/mach/board-eb.h
  *
  * Copyright (C) 2007 ARM Limited
  *
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_BOARD_EB_H
 #define __ASM_ARCH_BOARD_EB_H
 
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 /*
  * RealView EB + ARM11MPCore peripheral addresses
diff --git a/include/asm-arm/arch-realview/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 48ce9c83370..858eea7b1ad 100644
--- a/include/asm-arm/arch-realview/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-realview/board-pb1176.h
+ * arch/arm/mach-realview/include/mach/board-pb1176.h
  *
  * Copyright (C) 2008 ARM Limited
  *
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_BOARD_PB1176_H
 #define __ASM_ARCH_BOARD_PB1176_H
 
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 /*
  * Peripheral addresses
diff --git a/include/asm-arm/arch-realview/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index a1294d915fa..ecd80e58631 100644
--- a/include/asm-arm/arch-realview/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-realview/board-pb11mp.h
+ * arch/arm/mach-realview/include/mach/board-pb11mp.h
  *
  * Copyright (C) 2008 ARM Limited
  *
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_BOARD_PB11MP_H
 #define __ASM_ARCH_BOARD_PB11MP_H
 
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 /*
  * Peripheral addresses
diff --git a/include/asm-arm/arch-realview/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index c8c860c3c26..7196bcadff0 100644
--- a/include/asm-arm/arch-realview/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-realview/debug-macro.S
+/* arch/arm/mach-realview/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-realview/dma.h b/arch/arm/mach-realview/include/mach/dma.h
index 8342e3f9d6e..f1a5a1a1095 100644
--- a/include/asm-arm/arch-realview/dma.h
+++ b/arch/arm/mach-realview/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-realview/dma.h
+ *  arch/arm/mach-realview/include/mach/dma.h
  *
  *  Copyright (C) 2003 ARM Limited.
  *  Copyright (C) 1997,1998 Russell King
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
index cd26306d8e5..340a5c27694 100644
--- a/include/asm-arm/arch-realview/entry-macro.S
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-realview/entry-macro.S
+ * arch/arm/mach-realview/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for RealView platforms
  *
@@ -7,7 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 
 		.macro	disable_fiq
diff --git a/include/asm-arm/arch-realview/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index 1ee8313ceb6..79a93b3dfca 100644
--- a/include/asm-arm/arch-realview/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-realview/hardware.h
+ *  arch/arm/mach-realview/include/mach/hardware.h
  *
  *  This file contains the hardware definitions of the RealView boards.
  *
diff --git a/include/asm-arm/arch-realview/io.h b/arch/arm/mach-realview/include/mach/io.h
index c70f1dfbe13..aa069424d31 100644
--- a/include/asm-arm/arch-realview/io.h
+++ b/arch/arm/mach-realview/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-realview/io.h
+ *  arch/arm/mach-realview/include/mach/io.h
  *
  *  Copyright (C) 2003 ARM Limited
  *
diff --git a/include/asm-arm/arch-realview/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index ccbac59235c..02a918529db 100644
--- a/include/asm-arm/arch-realview/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-realview/irqs.h
+ *  arch/arm/mach-realview/include/mach/irqs.h
  *
  *  Copyright (C) 2003 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
@@ -22,9 +22,9 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/board-pb1176.h>
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
 
 #define IRQ_LOCALTIMER		29
 #define IRQ_LOCALWDOG		30
diff --git a/include/asm-arm/arch-realview/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index ed370abb638..0e673483a14 100644
--- a/include/asm-arm/arch-realview/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-realview/memory.h
+ *  arch/arm/mach-realview/include/mach/memory.h
  *
  *  Copyright (C) 2003 ARM Limited
  *
diff --git a/include/asm-arm/arch-realview/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 424c0aaf46a..4034b54950c 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-realview/platform.h
+ * arch/arm/mach-realview/include/mach/platform.h
  *
  * Copyright (c) ARM Limited 2003.  All rights reserved.
  *
diff --git a/include/asm-arm/arch-realview/scu.h b/arch/arm/mach-realview/include/mach/scu.h
index d55802d645a..d55802d645a 100644
--- a/include/asm-arm/arch-realview/scu.h
+++ b/arch/arm/mach-realview/include/mach/scu.h
diff --git a/include/asm-arm/arch-realview/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index 515819efd04..515819efd04 100644
--- a/include/asm-arm/arch-realview/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
diff --git a/include/asm-arm/arch-realview/system.h b/arch/arm/mach-realview/include/mach/system.h
index 6f3d0ce0ca1..4d3c8f3f805 100644
--- a/include/asm-arm/arch-realview/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-realview/system.h
+ *  arch/arm/mach-realview/include/mach/system.h
  *
  *  Copyright (C) 2003 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
@@ -21,9 +21,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-realview/timex.h b/arch/arm/mach-realview/include/mach/timex.h
index 5b9d82d0a5e..4eeb069373c 100644
--- a/include/asm-arm/arch-realview/timex.h
+++ b/arch/arm/mach-realview/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-realview/timex.h
+ *  arch/arm/mach-realview/include/mach/timex.h
  *
  *  RealView architecture timex specifications
  *
diff --git a/include/asm-arm/arch-realview/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 4c905d7a13a..79f50f218e7 100644
--- a/include/asm-arm/arch-realview/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-realview/uncompress.h
+ *  arch/arm/mach-realview/include/mach/uncompress.h
  *
  *  Copyright (C) 2003 ARM Limited
  *
@@ -17,12 +17,12 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/board-pb1176.h>
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
 
 #define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
 #define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
diff --git a/include/asm-arm/arch-realview/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
index 0ad49af186a..48cbcc873db 100644
--- a/include/asm-arm/arch-realview/vmalloc.h
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-realview/vmalloc.h
+ *  arch/arm/mach-realview/include/mach/vmalloc.h
  *
  *  Copyright (C) 2003 ARM Limited
  *  Copyright (C) 2000 Russell King.
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 50604360479..82fa1f26e02 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -20,7 +20,7 @@
 
 #include <asm/hardware/arm_twd.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 8e813ed5751..1907d22f4fe 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -15,13 +15,13 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/scu.h>
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/scu.h>
 
 extern void realview_secondary_startup(void);
 
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 5782d83fd88..19a9968fc5b 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -38,8 +38,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-eb.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index cf7f576a586..0986cbd1594 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -39,8 +39,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-pb1176.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb1176.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index f7ce1c5a178..f4e7135e3eb 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -39,8 +39,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb11mp.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 596379a4cf8..4b19fe48419 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -20,7 +20,7 @@
 #include <asm/fiq.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 
 #include <asm/mach/dma.h>
diff --git a/include/asm-arm/arch-rpc/acornfb.h b/arch/arm/mach-rpc/include/mach/acornfb.h
index ecb7733a094..395d76288ff 100644
--- a/include/asm-arm/arch-rpc/acornfb.h
+++ b/arch/arm/mach-rpc/include/mach/acornfb.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/acornfb.h
+ *  arch/arm/mach-rpc/include/mach/acornfb.h
  *
  *  Copyright (C) 1999 Russell King
  *
diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index c634c8d8f4a..b2a939ffdcd 100644
--- a/include/asm-arm/arch-rpc/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-rpc/debug-macro.S
+/* arch/arm/mach-rpc/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-rpc/dma.h b/arch/arm/mach-rpc/include/mach/dma.h
index d24a27e30b9..360b56f8f29 100644
--- a/include/asm-arm/arch-rpc/dma.h
+++ b/arch/arm/mach-rpc/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/dma.h
+ *  arch/arm/mach-rpc/include/mach/dma.h
  *
  *  Copyright (C) 1997 Russell King
  *
diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
index 038b761fdad..4e7e5414409 100644
--- a/include/asm-arm/arch-cl7500/entry-macro.S
+++ b/arch/arm/mach-rpc/include/mach/entry-macro.S
@@ -1,4 +1,4 @@
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/entry-macro-iomd.S>
 
 	.equ	ioc_base_high, IOC_BASE & 0xff000000
diff --git a/include/asm-arm/arch-rpc/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
index 7480f4e8d97..dde6b3c0e29 100644
--- a/include/asm-arm/arch-rpc/hardware.h
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/hardware.h
+ *  arch/arm/mach-rpc/include/mach/hardware.h
  *
  *  Copyright (C) 1996-1999 Russell King.
  *
@@ -12,7 +12,7 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 
 #ifndef __ASSEMBLY__
 #define IOMEM(x) ((void __iomem *)(unsigned long)(x))
diff --git a/include/asm-arm/arch-rpc/io.h b/arch/arm/mach-rpc/include/mach/io.h
index 6bd2295c0e0..9f0553b7ec2 100644
--- a/include/asm-arm/arch-rpc/io.h
+++ b/arch/arm/mach-rpc/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/io.h
+ *  arch/arm/mach-rpc/include/mach/io.h
  *
  *  Copyright (C) 1997 Russell King
  *
@@ -13,7 +13,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-rpc/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
index 27c35b05b27..4ce6ca97f66 100644
--- a/include/asm-arm/arch-rpc/irqs.h
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/irqs.h
+ *  arch/arm/mach-rpc/include/mach/irqs.h
  *
  *  Copyright (C) 1996 Russell King
  *
diff --git a/include/asm-arm/arch-rpc/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
index 303c424ce67..05425d558ee 100644
--- a/include/asm-arm/arch-rpc/memory.h
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/memory.h
+ *  arch/arm/mach-rpc/include/mach/memory.h
  *
  *  Copyright (C) 1996,1997,1998 Russell King.
  *
diff --git a/include/asm-arm/arch-rpc/system.h b/arch/arm/mach-rpc/include/mach/system.h
index 729c2ae4b51..54d6e3f2d31 100644
--- a/include/asm-arm/arch-rpc/system.h
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/system.h
+ *  arch/arm/mach-rpc/include/mach/system.h
  *
  *  Copyright (C) 1996-1999 Russell King.
  *
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/io.h>
 
diff --git a/include/asm-arm/arch-rpc/timex.h b/arch/arm/mach-rpc/include/mach/timex.h
index ed7df64d960..dd75e7387bb 100644
--- a/include/asm-arm/arch-rpc/timex.h
+++ b/arch/arm/mach-rpc/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/timex.h
+ *  arch/arm/mach-rpc/include/mach/timex.h
  *
  *  Copyright (C) 1997, 1998 Russell King
  *
diff --git a/include/asm-arm/arch-rpc/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index b8e29efd8c5..baa9c866d7b 100644
--- a/include/asm-arm/arch-rpc/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/uncompress.h
+ *  arch/arm/mach-rpc/include/mach/uncompress.h
  *
  *  Copyright (C) 1996 Russell King
  *
@@ -9,7 +9,7 @@
  */
 #define VIDMEM ((char *)SCREEN_START)
  
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/page.h>
diff --git a/include/asm-arm/arch-rpc/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
index 077046bb2f3..9a96fd69e70 100644
--- a/include/asm-arm/arch-rpc/vmalloc.h
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-rpc/vmalloc.h
+ *  arch/arm/mach-rpc/include/mach/vmalloc.h
  *
  *  Copyright (C) 1997 Russell King
  *
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index eca558c6bf5..ce8470fea88 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -22,7 +22,7 @@
 #include <asm/elf.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/domain.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 758e160410e..148d0ddef3e 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -25,11 +25,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
diff --git a/include/asm-arm/arch-s3c2400/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
index 1184d907b31..1535540edc8 100644
--- a/include/asm-arm/arch-s3c2400/map.h
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2400/map.h
+/* arch/arm/mach-s3c2400/include/mach/map.h
  *
  * Copyright 2003,2007  Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/include/asm-arm/arch-s3c2400/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
index fb0381dde70..8f4878e4f59 100644
--- a/include/asm-arm/arch-s3c2400/memory.h
+++ b/arch/arm/mach-s3c2400/include/mach/memory.h
@@ -1,5 +1,5 @@
-/* linux/include/asm-arm/arch-s3c2400/memory.h
- *  from linux/include/asm-arm/arch-rpc/memory.h
+/* arch/arm/mach-s3c2400/include/mach/memory.h
+ *  from arch/arm/mach-rpc/include/mach/memory.h
  *
  *  Copyright 2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c
index df95fe37cdc..298ececfa36 100644
--- a/arch/arm/mach-s3c2410/bast-ide.c
+++ b/arch/arm/mach-s3c2410/bast-ide.c
@@ -24,9 +24,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
 
 /* IDE ports */
 
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 76a7cb15f3b..c66021b5fa4 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -28,15 +28,15 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/regs-irq.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
 
 #include <asm/plat-s3c24xx/irq.h>
 
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 2bfaa610202..1322851d1ac 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -34,12 +34,12 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 8f12e855ef5..8730797749e 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -18,17 +18,17 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/dma.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 01e795d1146..c6eefb1d590 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -26,11 +26,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 			   unsigned int config)
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 3c48886521e..5a6bc56f186 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,9 +16,9 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/h1940-latch.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/h1940-latch.h>
 
 #define DRV_NAME              "h1940-bt"
 
diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
index 168b93fee52..1b614d5a81f 100644
--- a/include/asm-arm/arch-s3c2410/anubis-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h
+/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
index cd77a70d45c..a2a328134e3 100644
--- a/include/asm-arm/arch-s3c2410/anubis-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h
+/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
index 830d114261d..c9deb3a5b2c 100644
--- a/include/asm-arm/arch-s3c2410/anubis-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-map.h
+/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
diff --git a/include/asm-arm/arch-s3c2410/audio.h b/arch/arm/mach-s3c2410/include/mach/audio.h
index 0a6977fb577..de0e8da48bc 100644
--- a/include/asm-arm/arch-s3c2410/audio.h
+++ b/arch/arm/mach-s3c2410/include/mach/audio.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/audio.h
+/* arch/arm/mach-s3c2410/include/mach/audio.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
index 034d2c5a47c..20493b04836 100644
--- a/include/asm-arm/arch-s3c2410/bast-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h
+/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
index 726c0466f85..501c202b53c 100644
--- a/include/asm-arm/arch-s3c2410/bast-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-irq.h
+/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
index 86ac1c108db..c2c5baf0734 100644
--- a/include/asm-arm/arch-s3c2410/bast-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-map.h
+/* arch/arm/mach-s3c2410/include/mach/bast-map.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
index 37a11fe54a7..61684cb8ce5 100644
--- a/include/asm-arm/arch-s3c2410/bast-pmu.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h
+/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 89076c32272..682df23087a 100644
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/debug-macro.S
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #define S3C2410_UART1_OFF (0x4000)
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 4f291d9b7d9..891b53cd69b 100644
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/dma.h
+/* arch/arm/mach-s3c2410/include/mach/dma.h
  *
  * Copyright (C) 2003,2004,2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -14,7 +14,7 @@
 #define __ASM_ARCH_DMA_H __FILE__
 
 #include <linux/sysdev.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * This is the maximum DMA address(physical address) that can be DMAd to.
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
index bbec0a8ff15..473b3cd37d9 100644
--- a/include/asm-arm/arch-s3c2410/entry-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-s3c2410/entry-macro.S
+ * arch/arm/mach-s3c2410/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for S3C2410-based platforms
  *
@@ -19,7 +19,7 @@
 #define INTPND		(0x10)
 #define INTOFFSET	(0x14)
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 	.macro  get_irqnr_preamble, base, tmp
diff --git a/include/asm-arm/arch-s3c2410/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h
index 5d0262601a7..eee0654eb8f 100644
--- a/include/asm-arm/arch-s3c2410/fb.h
+++ b/arch/arm/mach-s3c2410/include/mach/fb.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/fb.h
+/* arch/arm/mach-s3c2410/include/mach/fb.h
  *
  * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
  *
@@ -12,7 +12,7 @@
 #ifndef __ASM_ARM_FB_H
 #define __ASM_ARM_FB_H
 
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-lcd.h>
 
 struct s3c2410fb_hw {
 	unsigned long	lcdcon1;
diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 18e10d2c35e..3b52b86498a 100644
--- a/include/asm-arm/arch-s3c2410/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/gpio.h
+/* arch/arm/mach-s3c2410/include/mach/gpio.h
  *
  * Copyright (c) 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
index c3de5ab102e..d8a832729a8 100644
--- a/include/asm-arm/arch-s3c2410/h1940-latch.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
+/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/include/asm-arm/arch-s3c2410/h1940.h b/arch/arm/mach-s3c2410/include/mach/h1940.h
index 6135592e60f..4559784129c 100644
--- a/include/asm-arm/arch-s3c2410/h1940.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/h1940.h
+/* arch/arm/mach-s3c2410/include/mach/h1940.h
  *
  * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
  *
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
index 29592c3ebf2..74d5a1a4024 100644
--- a/include/asm-arm/arch-s3c2410/hardware.h
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/hardware.h
+/* arch/arm/mach-s3c2410/include/mach/hardware.h
  *
  * Copyright (c) 2003 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -13,10 +13,6 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#ifndef __ASM_HARDWARE_H
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
 #ifndef __ASSEMBLY__
 
 /* external functions for GPIO support
@@ -131,7 +127,7 @@ extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
 #endif /* __ASSEMBLY__ */
 
 #include <asm/sizes.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 
 /* machine specific hardware definitions should go after this */
 
diff --git a/include/asm-arm/arch-s3c2410/idle.h b/arch/arm/mach-s3c2410/include/mach/idle.h
index eed450608f9..e9ddd706b16 100644
--- a/include/asm-arm/arch-s3c2410/idle.h
+++ b/arch/arm/mach-s3c2410/include/mach/idle.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/idle.h
+/* arch/arm/mach-s3c2410/include/mach/idle.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/io.h b/arch/arm/mach-s3c2410/include/mach/io.h
index 6b35a4f2630..9813dbf2ae4 100644
--- a/include/asm-arm/arch-s3c2410/io.h
+++ b/arch/arm/mach-s3c2410/include/mach/io.h
@@ -1,6 +1,6 @@
 /*
- * linux/include/asm-arm/arch-s3c2410/io.h
- *  from linux/include/asm-arm/arch-rpc/io.h
+ * arch/arm/mach-s3c2410/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
  *
  * Copyright (C) 1997 Russell King
  *	     (C) 2003 Simtec Electronics
@@ -9,7 +9,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index f5435d8c376..950c71bf148 100644
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/irqs.h
+/* arch/arm/mach-s3c2410/include/mach/irqs.h
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/leds-gpio.h b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
index 800846ebddb..d8a7672519b 100644
--- a/include/asm-arm/arch-s3c2410/leds-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/leds-gpio.h
+/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
  *
  * Copyright (c) 2006 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/include/asm-arm/arch-s3c2410/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index b33ed3b05ef..64bf7e94a5b 100644
--- a/include/asm-arm/arch-s3c2410/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/map.h
+/* arch/arm/mach-s3c2410/include/mach/map.h
  *
  * Copyright (c) 2003 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
index 533e2436e70..93782628a78 100644
--- a/include/asm-arm/arch-s3c2410/memory.h
+++ b/arch/arm/mach-s3c2410/include/mach/memory.h
@@ -1,5 +1,5 @@
-/* linux/include/asm-arm/arch-s3c2410/memory.h
- *  from linux/include/asm-arm/arch-rpc/memory.h
+/* arch/arm/mach-s3c2410/include/mach/memory.h
+ *  from arch/arm/mach-rpc/include/mach/memory.h
  *
  *  Copyright (C) 1996,1997,1998 Russell King.
  *
diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
index 229ab2351db..e9e36b0abba 100644
--- a/include/asm-arm/arch-s3c2410/osiris-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
+/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
  *
  * Copyright 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
index b5c74d2b9aa..639eff523d4 100644
--- a/include/asm-arm/arch-s3c2410/osiris-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/osiris-map.h
+/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
  *
  * (c) 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/arch/arm/mach-s3c2410/include/mach/otom-map.h
index e40c9342985..f9277a52c14 100644
--- a/include/asm-arm/arch-s3c2410/otom-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/otom-map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/otom-map.h
+/* arch/arm/mach-s3c2410/include/mach/otom-map.h
  *
  * (c) 2005 Guillaume GOURAT / NexVision
  *          guillaume.gourat@nexvision.fr
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index 37661358b42..b3f90aa7807 100644
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
+/* arch/arm/mach-s3c2410/include/mach/regs-clock.h
  *
  * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
  *		      http://armlinux.simtec.co.uk/
@@ -11,7 +11,7 @@
 */
 
 #ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
+#define __ASM_ARM_REGS_CLOCK
 
 #define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
 
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
index 1235df70f34..3c3853cd3cf 100644
--- a/include/asm-arm/arch-s3c2410/regs-dsc.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-dsc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 497dd06e2c9..528080ceac4 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-gpio.h
+/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
  *		           http://www.simtec.co.uk/products/SWLINUX/
@@ -12,7 +12,7 @@
 
 
 #ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
+#define __ASM_ARCH_REGS_GPIO_H
 
 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
 
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
index 0362332faaf..1202ca5e99f 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpioj.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-gpioj.h
+/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
index 498184cb8ad..de86ee8812b 100644
--- a/include/asm-arm/arch-s3c2410/regs-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-irq.h
+/* arch/arm/mach-s3c2410/include/mach/regs-irq.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
@@ -10,7 +10,7 @@
 
 
 #ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
+#define ___ASM_ARCH_REGS_IRQ_H
 
 /* interrupt controller */
 
diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
index bd854845697..ee8f040aff5 100644
--- a/include/asm-arm/arch-s3c2410/regs-lcd.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-lcd.h
+/* arch/arm/mach-s3c2410/include/mach/regs-lcd.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
@@ -10,7 +10,7 @@
 
 
 #ifndef ___ASM_ARCH_REGS_LCD_H
-#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
+#define ___ASM_ARCH_REGS_LCD_H
 
 #define S3C2410_LCDREG(x)	(x)
 
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 312ff93b63c..57759804e2f 100644
--- a/include/asm-arm/arch-s3c2410/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-mem.h
+/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
@@ -11,7 +11,7 @@
 */
 
 #ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
+#define __ASM_ARM_MEMREGS_H
 
 #ifndef S3C2410_MEMREG
 #define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
index 13d13b7cfe9..2d36353f57d 100644
--- a/include/asm-arm/arch-s3c2410/regs-power.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-power.h
+/* arch/arm/mach-s3c2410/include/mach/regs-power.h
  *
  * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
  *		      http://armlinux.simtec.co.uk/
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index c8c793e7893..a4bf2712317 100644
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
  *
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
index 783b18f5bce..aa69dc79bc3 100644
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
  *
  * Copyright 2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index c1414658d1c..6026d091a2f 100644
--- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
  *
  * Copyright (c) 2007 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -48,11 +48,11 @@
 #define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
 #define S3C2443_CLKSRC_I2S_MASK		(3<<14)
 
-#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<8)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<8)
-#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<8)
+#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
+#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
 
 #define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
 #define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
index bfb222fa4ab..cbf2d8884e3 100644
--- a/include/asm-arm/arch-s3c2410/regs-sdi.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-sdi.h
+/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h
index 4f866cdecab..f8c9387b049 100644
--- a/include/asm-arm/arch-s3c2410/reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/reset.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/reset.h
+/* arch/arm/mach-s3c2410/include/mach/reset.h
  *
  * Copyright (c) 2007 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 73803731142..3fe8be9ca11 100644
--- a/include/asm-arm/arch-s3c2410/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/spi-gpio.h
+/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 442169887d3..921b13b4f0a 100644
--- a/include/asm-arm/arch-s3c2410/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/spi.h
+/* arch/arm/mach-s3c2410/include/mach/spi.h
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index 1615bce0c02..ec2defebf0d 100644
--- a/include/asm-arm/arch-s3c2410/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/system-reset.h
+/* arch/arm/mach-s3c2410/include/mach/system-reset.h
  *
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -10,11 +10,11 @@
  * published by the Free Software Foundation.
 */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-watchdog.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <linux/clk.h>
 #include <linux/err.h>
diff --git a/include/asm-arm/arch-s3c2410/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
index ad258085e53..e9f676bc011 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/system.h
+/* arch/arm/mach-s3c2410/include/mach/system.h
  *
  * Copyright (c) 2003 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -10,14 +10,14 @@
  * published by the Free Software Foundation.
 */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/idle.h>
-#include <asm/arch/reset.h>
+#include <mach/map.h>
+#include <mach/idle.h>
+#include <mach/reset.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 void (*s3c24xx_idle)(void);
 void (*s3c24xx_reset_hook)(void);
@@ -55,4 +55,4 @@ static void arch_idle(void)
 		s3c24xx_default_idle();
 }
 
-#include <asm/arch/system-reset.h>
+#include <mach/system-reset.h>
diff --git a/include/asm-arm/arch-s3c2410/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
index c16a99c5a59..2a425ed0a7e 100644
--- a/include/asm-arm/arch-s3c2410/timex.h
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/timex.h
+/* arch/arm/mach-s3c2410/include/mach/timex.h
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index 48a5731ee98..708e47459ff 100644
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/uncompress.h
+/* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
  * Copyright (c) 2003, 2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -14,8 +14,8 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/map.h>
 
 /* working in physical space... */
 #undef S3C2410_GPIOREG
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/arch/arm/mach-s3c2410/include/mach/usb-control.h
index 5bfa376e33d..cd91d1591f3 100644
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ b/arch/arm/mach-s3c2410/include/mach/usb-control.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/usb-control.h
+/* arch/arm/mach-s3c2410/include/mach/usb-control.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -11,7 +11,7 @@
 */
 
 #ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h"
+#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
 
 #define S3C_HCDFLG_USED	(1)
 
diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
index 0ae3bdb7e03..315b0078a34 100644
--- a/include/asm-arm/arch-s3c2410/vmalloc.h
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -1,6 +1,6 @@
-/* linux/include/asm-arm/arch-s3c2410/vmalloc.h
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
  *
- * from linux/include/asm-arm/arch-iop3xx/vmalloc.h
+ * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
index 0557b0a5ab1..e4119913d7c 100644
--- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
  *
  * Copyright (c) 2003 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
index 890937083c6..f53f85b4ad8 100644
--- a/include/asm-arm/arch-s3c2410/vr1000-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h
+/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
index 92a56a724a8..99612fcc4eb 100644
--- a/include/asm-arm/arch-s3c2410/vr1000-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h
+/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_VR1000MAP_H
 #define __ASM_ARCH_VR1000MAP_H
 
-#include <asm/arch/bast-map.h>
+#include <mach/bast-map.h>
 
 #define VR1000_IOADDR(x) BAST_IOADDR(x)
 
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index a67a0685664..f0de3c23ce7 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -42,15 +42,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 965f2712970..24c6334fac8 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -29,24 +29,24 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -562,7 +562,7 @@ static struct platform_device *bast_devices[] __initdata = {
 	&bast_sio,
 };
 
-static struct clk *bast_clocks[] = {
+static struct clk *bast_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7c1145e87c1..e35933a46d1 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,19 +25,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
 
-#include <asm/arch/h1940.h>
-#include <asm/arch/h1940-latch.h>
-#include <asm/arch/fb.h>
+#include <mach/h1940.h>
+#include <mach/h1940-latch.h>
+#include <mach/fb.h>
 #include <asm/plat-s3c24xx/udc.h>
 
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 43c2e915c5b..80fe2ed0775 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -26,15 +26,15 @@
 #include <linux/serial_core.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fb.h>
-#include <asm/arch/leds-gpio.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/fb.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 717af40e447..606ee15911b 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -22,15 +22,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/otom-map.h>
+#include <mach/otom-map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index a1caf4b0ada..7d34844debd 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -42,19 +42,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/spi.h>
-#include <asm/arch/spi-gpio.h>
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 226550504c8..b88939d7228 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2004 by FS Forth-Systeme GmbH
  * All rights reserved.
  *
- * $Id: mach-smdk2410.c,v 1.1 2004/05/11 14:15:38 mpietrek Exp $
  * @Author: Jonas Dietsche
  *
  * This program is free software; you can redistribute it and/or
@@ -42,7 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index d90d445ccfb..ec87306a8c2 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -39,7 +39,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 9a0965ac5e1..fbc0213d548 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -30,19 +30,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/vr1000-map.h>
-#include <asm/arch/vr1000-irq.h>
-#include <asm/arch/vr1000-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/vr1000-map.h>
+#include <mach/vr1000-irq.h>
+#include <mach/vr1000-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
@@ -344,7 +344,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&vr1000_led3,
 };
 
-static struct clk *vr1000_clocks[] = {
+static struct clk *vr1000_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
index f44e21b9c3b..598d130633d 100644
--- a/arch/arm/mach-s3c2410/nor-simtec.c
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -26,10 +26,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-cpld.h>
 
+#include "nor-simtec.h"
 
 static void simtec_nor_vpp(struct map_info *map, int vpp)
 {
@@ -50,7 +51,7 @@ static void simtec_nor_vpp(struct map_info *map, int vpp)
 	local_irq_restore(flags);
 }
 
-struct physmap_flash_data simtec_nor_pdata = {
+static struct physmap_flash_data simtec_nor_pdata = {
 	.width		= 2,
 	.set_vpp	= simtec_nor_vpp,
 	.nr_parts	= 0,
diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c2410/pm-h1940.S
index 7d66de7ff7d..c93bf2db9f4 100644
--- a/arch/arm/mach-s3c2410/pm-h1940.S
+++ b/arch/arm/mach-s3c2410/pm-h1940.S
@@ -20,10 +20,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 	.text
 	.global	h1940_pm_return
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 3b3a7db4e0d..ba43ff9e816 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -26,13 +26,13 @@
 #include <linux/time.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/mach-types.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/h1940.h>
+#include <mach/regs-gpio.h>
+#include <mach/h1940.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 0e7991940f8..5d977f9c88a 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -24,11 +24,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 8a9c5a2bb25..be37f221a17 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -26,12 +26,12 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 	/* s3c2410_cpu_suspend
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6aec86a5da5..4dacf8a1750 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -26,12 +26,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/usb-control.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/usb-control.h>
+#include <mach/regs-gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 1157b5a1626..af4b2ce516f 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -34,12 +34,12 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 1dd86499356..22fc04a3b53 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -18,18 +18,18 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
index 8e55c3a2eab..f7afece7fc3 100644
--- a/arch/arm/mach-s3c2412/gpio.c
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -20,9 +20,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
 {
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index cc1917bf952..ac62b79044f 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -25,15 +25,15 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-power.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-power.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/irq.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 7f592471348..ad980a1690c 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -26,9 +26,6 @@
 
 #include <linux/spi/spi.h>
 
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -37,12 +34,12 @@
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
 
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/spi-gpio.h>
-#include <asm/arch/fb.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/spi-gpio.h>
+#include <mach/fb.h>
 
 #include <asm/mach-types.h>
 
@@ -398,7 +395,7 @@ static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
-	.bus_num	= 0,
+	.bus_num	= 1,
 	.pin_clk	= S3C2410_GPG8,
 	.pin_mosi	= S3C2410_GPB8,
 	.chip_select	= jive_lcd_spi_chipselect,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index b126a530daa..80affb1ee4c 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -24,7 +24,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/setup.h>
 #include <asm/io.h>
@@ -33,12 +33,12 @@
 
 //#include <asm/debug-ll.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
+#include <mach/idle.h>
 #include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2412.h>
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 32982547cd6..7a08b378991 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -27,18 +27,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c/nand.h>
 
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index d4ffb2d9807..737523a4e03 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -19,14 +19,14 @@
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 98a0de924c2..d278010b9f6 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -25,22 +25,22 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/reset.h>
-#include <asm/arch/idle.h>
+#include <mach/reset.h>
+#include <mach/idle.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/regs-s3c2412.h>
+#include <mach/regs-s3c2412.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
index db32cac4199..c82418ed714 100644
--- a/arch/arm/mach-s3c2412/sleep.S
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -22,10 +22,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 
 	.text
 
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 184d804934c..95567e6daea 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 0b1260827ac..cdd4e6e79ac 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -18,17 +18,17 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 2995ff5681b..c0c67438d0a 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -20,12 +20,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index a87608bc1a0..276b823f4e2 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 09af8b23500..441f4bc0947 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -27,19 +27,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/anubis-map.h>
-#include <asm/arch/anubis-irq.h>
-#include <asm/arch/anubis-cpld.h>
+#include <mach/anubis-map.h>
+#include <mach/anubis-irq.h>
+#include <mach/anubis-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
@@ -414,7 +414,7 @@ static struct platform_device *anubis_devices[] __initdata = {
 	&anubis_device_sm501,
 };
 
-static struct clk *anubis_clocks[] = {
+static struct clk *anubis_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index f5e3c7f2763..f0f0cc6afcf 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -27,14 +27,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index afe0d7b7e38..1a5e7027b41 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -29,13 +29,13 @@
 #include <asm/mach/irq.h>
 
 #include <asm/setup.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index af996b0e91e..8b83f93b610 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -25,18 +25,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/osiris-map.h>
-#include <asm/arch/osiris-cpld.h>
+#include <mach/osiris-map.h>
+#include <mach/osiris-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
@@ -341,7 +341,7 @@ static struct platform_device *osiris_devices[] __initdata = {
 	&osiris_pcmcia,
 };
 
-static struct clk *osiris_clocks[] = {
+static struct clk *osiris_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index bac40c4878a..e0b07e6a0a1 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -33,18 +33,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/h1940.h>
+#include <mach/h1940.h>
 #include <asm/plat-s3c/nand.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 4552828bf80..327c8f37198 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 90e1da61fbc..d6b9a92d284 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -25,7 +25,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 2d030d439fe..569b5c3d334 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 17f064fabda..6a8d7cced4a 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -34,10 +34,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-s3c2443-clock.h>
+#include <mach/regs-s3c2443-clock.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index f6c006d4297..c1ff03aebfd 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -18,18 +18,18 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index f9ad498a6fc..9674de7223f 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 8cd93130ef3..e3c0d587bd1 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 9ce490560af..37793f924b5 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -25,12 +25,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-s3c2443-clock.h>
-#include <asm/arch/reset.h>
+#include <mach/regs-s3c2443-clock.h>
+#include <mach/reset.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 8e0244631d6..8a5546e6d54 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -46,9 +46,6 @@ led-$(CONFIG_SA1100_SIMPAD)		+= leds-simpad.o
 # LEDs support
 obj-$(CONFIG_LEDS) += $(led-y)
 
-# SA1110 USB client support
-#obj-$(CONFIG_SA1100_USB)		+= usb/
-
 # Miscelaneous functions
 obj-$(CONFIG_PM)			+= pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)		+= ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index be06d668a3c..55e64477a87 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,7 +20,7 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/irda.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/mcp.h>
+#include <mach/assabet.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 842d9e6dc5f..3efefbdd252 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -23,10 +23,10 @@
 #include <linux/mtd/partitions.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -34,7 +34,7 @@
 #include <asm/hardware/sa1111.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 56d3ee01baa..fd3ad9cfc91 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 
 #include <asm/mach-types.h>
@@ -28,8 +28,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/cerf.h>
-#include <asm/arch/mcp.h>
+#include <mach/cerf.h>
+#include <mach/mcp.h>
 #include "generic.h"
 
 static struct resource cerfuart2_resources[] = {
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index b5809c51d13..43c30f84abf 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,7 +11,7 @@
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Very simple clock implementation - we only have one clock to
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2f772a3965c..fe289997cfa 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,11 +26,11 @@
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -40,7 +40,7 @@
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/locomo.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index 94620be7bfa..b1161fc8060 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -24,11 +24,10 @@
 #include <linux/platform_device.h>
 
 #include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 #include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/sharpsl_pm.h>
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 343368aa82d..da3a898a6d6 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -88,7 +88,7 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 36b47ff5af1..029dbfbbafc 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2001 Russell King
  *
- *  $Id: cpu-sa1110.c,v 1.9 2002/07/06 16:53:18 rmk Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -26,7 +24,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index e5080286060..f990a3e8584 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -18,7 +18,7 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
 
@@ -76,7 +76,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
  * 	address of the hardware registers for that channel as the channel
  * 	identifier. This identifier is written to the location pointed by
  * 	@dma_regs. The list of possible values for @device are listed into
- * 	linux/include/asm-arm/arch-sa1100/dma.h as a dma_device_t enum.
+ * 	arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
  *
  * 	Note that reading from a port and writing to the same port are
  * 	actually considered as two different streams requiring separate
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 0c2fa1c4fb4..1362994c78a 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -21,7 +21,7 @@
 
 #include <asm/div64.h>
 #include <asm/cnt32_to_63.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
@@ -31,6 +31,9 @@
 
 #include "generic.h"
 
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
+
 #define NR_FREQS	16
 
 /*
diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c
index 372f1f4f54a..0d3829a8c2c 100644
--- a/arch/arm/mach-sa1100/gpio.c
+++ b/arch/arm/mach-sa1100/gpio.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 
 #include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "generic.h"
 
 static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index b34ff42bbd7..af25a78d705 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -30,7 +30,7 @@
 #include <linux/serial_core.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
@@ -41,14 +41,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
 
 #if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
-#include <asm/arch/h3600_gpio.h>
+#include <mach/h3600_gpio.h>
 #endif
 
 #ifdef CONFIG_SA1100_H3800
-#include <asm/arch/h3600_asic.h>
+#include <mach/h3600_asic.h>
 #endif
 
 #include "generic.h"
@@ -681,7 +681,7 @@ static struct ipaq_model_ops h3800_model_ops __initdata = {
 
 #define MAX_ASIC_ISR_LOOPS    20
 
-/* The order of these is important - see #include <asm/arch/irqs.h> */
+/* The order of these is important - see #include <mach/irqs.h> */
 static u32 kpio_irq_mask[] = {
 	KPIO_KEY_ALL,
 	KPIO_SPI_INT,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 046b213efd5..e7056c0b562 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/page.h>
diff --git a/include/asm-arm/arch-sa1100/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 62aaf04a390..62aaf04a390 100644
--- a/include/asm-arm/arch-sa1100/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
diff --git a/include/asm-arm/arch-sa1100/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
index 65ca8c79e6d..5d2ad7db991 100644
--- a/include/asm-arm/arch-sa1100/SA-1101.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1101.h
@@ -38,7 +38,7 @@
 #define SA1101_p2v(PhAdd)  (PhAdd)
 #endif
 
-#include <asm/arch/bitfield.h>
+#include <mach/bitfield.h>
 
 #define C               0
 #define Assembly        1
diff --git a/include/asm-arm/arch-sa1100/SA-1111.h b/arch/arm/mach-sa1100/include/mach/SA-1111.h
index c38f60915cb..c38f60915cb 100644
--- a/include/asm-arm/arch-sa1100/SA-1111.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1111.h
diff --git a/include/asm-arm/arch-sa1100/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
index d6a1bb5b494..3959b20d5d1 100644
--- a/include/asm-arm/arch-sa1100/assabet.h
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/assabet.h
+ * arch/arm/mach-sa1100/include/mach/assabet.h
  *
  * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
  *
diff --git a/include/asm-arm/arch-sa1100/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h
index 8d7a671492d..44d2e1bfc04 100644
--- a/include/asm-arm/arch-sa1100/badge4.h
+++ b/arch/arm/mach-sa1100/include/mach/badge4.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/badge4.h
+ * arch/arm/mach-sa1100/include/mach/badge4.h
  *
  *   Tim Connors <connors@hpl.hp.com>
  *   Christopher Hoover <ch@hpl.hp.com>
@@ -13,7 +13,7 @@
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H
-#error "include <asm/hardware.h> instead"
+#error "include <mach/hardware.h> instead"
 #endif
 
 #define BADGE4_SA1111_BASE		(0x48000000)
diff --git a/include/asm-arm/arch-sa1100/bitfield.h b/arch/arm/mach-sa1100/include/mach/bitfield.h
index f1f0e3387d9..f1f0e3387d9 100644
--- a/include/asm-arm/arch-sa1100/bitfield.h
+++ b/arch/arm/mach-sa1100/include/mach/bitfield.h
diff --git a/include/asm-arm/arch-sa1100/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h
index 9a19c3d07c1..c3ac3d0f946 100644
--- a/include/asm-arm/arch-sa1100/cerf.h
+++ b/arch/arm/mach-sa1100/include/mach/cerf.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-sa1100/cerf.h
+ * arch/arm/mach-sa1100/include/mach/cerf.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-arm/arch-sa1100/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 762eba53581..69e962416e3 100644
--- a/include/asm-arm/arch-sa1100/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/collie.h
+ * arch/arm/mach-sa1100/include/mach/collie.h
  *
  * This file contains the hardware specific definitions for Assabet
  * Only include this file from SA1100-specific files.
diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 267c317a740..1f0634d9270 100644
--- a/include/asm-arm/arch-sa1100/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-sa1100/debug-macro.S
+/* arch/arm/mach-sa1100/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
  *
 */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
@@ -19,7 +19,7 @@
 		movne	\rx, #0xf8000000	@ virtual address
 
 		@ We probe for the active serial port here, coherently with
-		@ the comment in include/asm-arm/arch-sa1100/uncompress.h.
+		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
 		@ We assume r1 can be clobbered.
 
 		@ see if Ser3 is active
diff --git a/include/asm-arm/arch-sa1100/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h
index 6b7917a2e77..dda1b351310 100644
--- a/include/asm-arm/arch-sa1100/dma.h
+++ b/arch/arm/mach-sa1100/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/dma.h
+ * arch/arm/mach-sa1100/include/mach/dma.h
  *
  * Generic SA1100 DMA support
  *
diff --git a/include/asm-arm/arch-sa1100/entry-macro.S b/arch/arm/mach-sa1100/include/mach/entry-macro.S
index 127db4aaf4f..6aa13c46c5d 100644
--- a/include/asm-arm/arch-sa1100/entry-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-sa1100/entry-macro.S
+ * arch/arm/mach-sa1100/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for SA1100-based platforms
  *
diff --git a/include/asm-arm/arch-sa1100/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 93d3395b102..582a0c92da5 100644
--- a/include/asm-arm/arch-sa1100/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/gpio.h
+ * arch/arm/mach-sa1100/include/mach/gpio.h
  *
  * SA1100 GPIO wrappers for arch-neutral GPIO calls
  *
@@ -24,7 +24,7 @@
 #ifndef __ASM_ARCH_SA1100_GPIO_H
 #define __ASM_ARCH_SA1100_GPIO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm-generic/gpio.h>
 
diff --git a/include/asm-arm/arch-sa1100/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 3ca0ecf095e..3ca0ecf095e 100644
--- a/include/asm-arm/arch-sa1100/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
diff --git a/include/asm-arm/arch-sa1100/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
index 62b0b787968..62b0b787968 100644
--- a/include/asm-arm/arch-sa1100/h3600_gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
diff --git a/include/asm-arm/arch-sa1100/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index 1abd7cfc8bc..5976435f42c 100644
--- a/include/asm-arm/arch-sa1100/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/hardware.h
+ * arch/arm/mach-sa1100/include/mach/hardware.h
  *
  * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
  *
diff --git a/include/asm-arm/arch-sa1100/ide.h b/arch/arm/mach-sa1100/include/mach/ide.h
index 193f6c15f4d..4c99c8f5e61 100644
--- a/include/asm-arm/arch-sa1100/ide.h
+++ b/arch/arm/mach-sa1100/include/mach/ide.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/ide.h
+ * arch/arm/mach-sa1100/include/mach/ide.h
  *
  * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
  *
@@ -10,7 +10,7 @@
  */
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #error "This code is broken and needs update to match with current ide support"
diff --git a/include/asm-arm/arch-sa1100/io.h b/arch/arm/mach-sa1100/include/mach/io.h
index 0756269404b..0c070a6149b 100644
--- a/include/asm-arm/arch-sa1100/io.h
+++ b/arch/arm/mach-sa1100/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/io.h
+ * arch/arm/mach-sa1100/include/mach/io.h
  *
  * Copyright (C) 1997-1999 Russell King
  *
diff --git a/include/asm-arm/arch-sa1100/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index 7bf80484bb7..0cb36609b3a 100644
--- a/include/asm-arm/arch-sa1100/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/irqs.h
+ * arch/arm/mach-sa1100/include/mach/irqs.h
  *
  * Copyright (C) 1996 Russell King
  * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h
index 45d2bb59f9d..cc6b4bfcecf 100644
--- a/include/asm-arm/arch-sa1100/jornada720.h
+++ b/arch/arm/mach-sa1100/include/mach/jornada720.h
@@ -1,10 +1,10 @@
 /*
- * include/asm-arm/arch-sa1100/jornada720.h
+ * arch/arm/mach-sa1100/include/mach/jornada720.h
  *
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ * SSP/MCU communication definitions for HP Jornada 710/720/728
  *
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- *  Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *  Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -25,3 +25,8 @@
 #define PWMOFF			0xDF
 #define TXDUMMY			0x11
 #define ERRORCODE		0x00
+
+extern void jornada_ssp_start(void);
+extern void jornada_ssp_end(void);
+extern int jornada_ssp_inout(u8 byte);
+extern int jornada_ssp_byte(u8 byte);
diff --git a/include/asm-arm/arch-sa1100/lart.h b/arch/arm/mach-sa1100/include/mach/lart.h
index 8a5482d908d..8a5482d908d 100644
--- a/include/asm-arm/arch-sa1100/lart.h
+++ b/arch/arm/mach-sa1100/include/mach/lart.h
diff --git a/include/asm-arm/arch-sa1100/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index f58a22755c6..fb8b09a57ad 100644
--- a/include/asm-arm/arch-sa1100/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-sa1100/mcp.h
+ *  arch/arm/mach-sa1100/include/mach/mcp.h
  *
  *  Copyright (C) 2005 Russell King.
  *
diff --git a/include/asm-arm/arch-sa1100/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index 0e907fc6d42..29f639e2afc 100644
--- a/include/asm-arm/arch-sa1100/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/memory.h
+ * arch/arm/mach-sa1100/include/mach/memory.h
  *
  * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
  */
diff --git a/include/asm-arm/arch-sa1100/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
index 80cfdac2b94..eaa09e86ad1 100644
--- a/include/asm-arm/arch-sa1100/mtd-xip.h
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -10,8 +10,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
  */
 
 #ifndef __ARCH_SA1100_MTD_XIP_H__
diff --git a/include/asm-arm/arch-sa1100/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
index 09ec9e2bd18..d3f044f92c0 100644
--- a/include/asm-arm/arch-sa1100/neponset.h
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/neponset.h
+ * arch/arm/mach-sa1100/include/mach/neponset.h
  *
  * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
  *
diff --git a/arch/arm/mach-sa1100/include/mach/reset.h b/arch/arm/mach-sa1100/include/mach/reset.h
new file mode 100644
index 00000000000..f61957e6842
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/reset.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#include "hardware.h"
+
+#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
+#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Exit from Low Power/Sleep */
+#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
+#define RESET_STATUS_ALL	(0xf)
+
+extern unsigned int reset_status;
+static inline void clear_reset_status(unsigned int mask)
+{
+	RCSR = mask;
+}
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-sa1100/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
index ec27d6e1214..ec27d6e1214 100644
--- a/include/asm-arm/arch-sa1100/shannon.h
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
diff --git a/include/asm-arm/arch-sa1100/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
index 034301d23f6..9296c4513ce 100644
--- a/include/asm-arm/arch-sa1100/simpad.h
+++ b/arch/arm/mach-sa1100/include/mach/simpad.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/simpad.h
+ * arch/arm/mach-sa1100/include/mach/simpad.h
  *
  * based of assabet.h same as HUW_Webpanel
  *
diff --git a/include/asm-arm/arch-sa1100/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index aef91e3b63f..63755ca5b1b 100644
--- a/include/asm-arm/arch-sa1100/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -1,9 +1,9 @@
 /*
- * linux/include/asm-arm/arch-sa1100/system.h
+ * arch/arm/mach-sa1100/include/mach/system.h
  *
  * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-sa1100/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h
index 837be9b797d..7a5d017b58b 100644
--- a/include/asm-arm/arch-sa1100/timex.h
+++ b/arch/arm/mach-sa1100/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/timex.h
+ * arch/arm/mach-sa1100/include/mach/timex.h
  *
  * SA1100 architecture timex specifications
  *
diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
index 17e64d232e7..714160b03d7 100644
--- a/include/asm-arm/arch-sa1100/uncompress.h
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-sa1100/uncompress.h
+ * arch/arm/mach-sa1100/include/mach/uncompress.h
  *
  * (C) 1999 Nicolas Pitre <nico@cam.org>
  *
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
new file mode 100644
index 00000000000..ec8fdc5a360
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index c5e438b12ec..86369a8f0ce 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -16,7 +16,7 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 52ac37d1e23..81848aa9642 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <video/s1d13xxxfb.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 395c39bed7d..28cf3696797 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -20,9 +20,9 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
+#include <mach/jornada720.h>
 #include <asm/hardware/ssp.h>
-#include <asm/arch/jornada720.h>
 
 static DEFINE_SPINLOCK(jornada_ssp_lock);
 static unsigned long jornada_ssp_flags;
@@ -109,12 +109,12 @@ EXPORT_SYMBOL(jornada_ssp_inout);
  * jornada_ssp_start - enable mcu
  *
  */
-int jornada_ssp_start()
+void jornada_ssp_start(void)
 {
 	spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
 	GPCR = GPIO_GPIO25;
 	udelay(50);
-	return 0;
+	return;
 };
 EXPORT_SYMBOL(jornada_ssp_start);
 
@@ -122,11 +122,11 @@ EXPORT_SYMBOL(jornada_ssp_start);
  * jornada_ssp_end - disable mcu and turn off lock
  *
  */
-int jornada_ssp_end()
+void jornada_ssp_end(void)
 {
 	GPSR = GPIO_GPIO25;
 	spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
-	return 0;
+	return;
 };
 EXPORT_SYMBOL(jornada_ssp_end);
 
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 07d3a696ae7..0cd52692d2f 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,14 +6,14 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
index ee978898987..64e9b4b11b5 100644
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ b/arch/arm/mach-sa1100/leds-assabet.c
@@ -11,10 +11,10 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
index 280929be972..cf1e38458b8 100644
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ b/arch/arm/mach-sa1100/leds-badge4.c
@@ -12,7 +12,7 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
index f38eeddbef1..259b48e0be8 100644
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ b/arch/arm/mach-sa1100/leds-cerf.c
@@ -5,7 +5,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
index 7e91cc90b5a..2bce137462e 100644
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ b/arch/arm/mach-sa1100/leds-hackkit.c
@@ -11,7 +11,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
index 2d27d76cfc6..0505a1fdcdb 100644
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ b/arch/arm/mach-sa1100/leds-lart.c
@@ -11,7 +11,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-simpad.c b/arch/arm/mach-sa1100/leds-simpad.c
index def090a8738..d50f4eeaa12 100644
--- a/arch/arm/mach-sa1100/leds-simpad.c
+++ b/arch/arm/mach-sa1100/leds-simpad.c
@@ -5,10 +5,10 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 967a48454f6..4856a6bd248 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -10,14 +10,14 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/neponset.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/sizes.h>
 
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 69a71f11625..83be1c6c5f8 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -11,7 +11,7 @@
 
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -20,7 +20,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 1693d447a22..111cce67ad2 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -27,7 +27,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 8acab7b1e4c..9ccdd09cf69 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,7 +9,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
@@ -17,8 +17,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/shannon.h>
+#include <mach/mcp.h>
+#include <mach/shannon.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index a9ae1b581aa..8dd63531795 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -14,7 +14,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 
 #include <asm/mach-types.h>
@@ -22,8 +22,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/simpad.h>
+#include <mach/mcp.h>
+#include <mach/simpad.h>
 
 #include <linux/serial_core.h>
 #include <linux/ioport.h>
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 5a84062f92a..171441f9671 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -18,7 +18,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index 06206ceb312..641f361c56f 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -20,7 +20,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/ssp.h>
 
 #define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index a9799cb35b7..24c0a4bae85 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -16,7 +16,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define MIN_OSCR_DELTA 2
 
diff --git a/include/asm-arm/arch-shark/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 7cb37f78825..0836cb78b29 100644
--- a/include/asm-arm/arch-shark/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-shark/debug-macro.S
+/* arch/arm/mach-shark/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-shark/dma.h b/arch/arm/mach-shark/include/mach/dma.h
index fc985d5e62a..c0a29bd2a74 100644
--- a/include/asm-arm/arch-shark/dma.h
+++ b/arch/arm/mach-shark/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-shark/dma.h
+ * arch/arm/mach-shark/include/mach/dma.h
  *
  * by Alexander Schulz
  */
diff --git a/include/asm-arm/arch-shark/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
index 82463f30f3d..e2853c0a333 100644
--- a/include/asm-arm/arch-shark/entry-macro.S
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-shark/entry-macro.S
+ * arch/arm/mach-shark/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for Shark platform
  *
diff --git a/include/asm-arm/arch-shark/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
index ecba4526089..cb0ee2943c1 100644
--- a/include/asm-arm/arch-shark/hardware.h
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -1,10 +1,10 @@
 /*
- * linux/include/asm-arm/arch-shark/hardware.h
+ * arch/arm/mach-shark/include/mach/hardware.h
  *
  * by Alexander Schulz
  *
  * derived from:
- * linux/include/asm-arm/arch-ebsa110/hardware.h
+ * arch/arm/mach-ebsa110/include/mach/hardware.h
  * Copyright (C) 1996-1999 Russell King.
  */
 #ifndef __ASM_ARCH_HARDWARE_H
diff --git a/include/asm-arm/arch-shark/io.h b/arch/arm/mach-shark/include/mach/io.h
index 87ffa27f296..92475922c06 100644
--- a/include/asm-arm/arch-shark/io.h
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -1,17 +1,17 @@
 /*
- * linux/include/asm-arm/arch-shark/io.h
+ * arch/arm/mach-shark/include/mach/io.h
  *
  * by Alexander Schulz
  *
  * derived from:
- * linux/include/asm-arm/arch-ebsa110/io.h
+ * arch/arm/mach-ebsa110/include/mach/io.h
  * Copyright (C) 1997,1998 Russell King
  */
 
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-shark/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
index b36cc975b29..0586acd7cdd 100644
--- a/include/asm-arm/arch-shark/irqs.h
+++ b/arch/arm/mach-shark/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-shark/irqs.h
+ * arch/arm/mach-shark/include/mach/irqs.h
  *
  * by Alexander Schulz
  */
diff --git a/include/asm-arm/arch-shark/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index 6968d6103ea..b7874ad9f9f 100644
--- a/include/asm-arm/arch-shark/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -1,10 +1,10 @@
 /*
- * linux/include/asm-arm/arch-shark/memory.h
+ * arch/arm/mach-shark/include/mach/memory.h
  *
  * by Alexander Schulz
  *
  * derived from:
- * linux/include/asm-arm/arch-ebsa110/memory.h
+ * arch/arm/mach-ebsa110/include/mach/memory.h
  * Copyright (c) 1996-1999 Russell King.
  */
 #ifndef __ASM_ARCH_MEMORY_H
diff --git a/include/asm-arm/arch-shark/system.h b/arch/arm/mach-shark/include/mach/system.h
index f12d771ab4c..85aceef6f87 100644
--- a/include/asm-arm/arch-shark/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-shark/system.h
+ * arch/arm/mach-shark/include/mach/system.h
  *
  * by Alexander Schulz
  */
diff --git a/include/asm-arm/arch-shark/timex.h b/arch/arm/mach-shark/include/mach/timex.h
index 0d02d255513..bb6eeaebed8 100644
--- a/include/asm-arm/arch-shark/timex.h
+++ b/arch/arm/mach-shark/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-shark/timex.h
+ * arch/arm/mach-shark/include/mach/timex.h
  *
  * by Alexander Schulz
  */
diff --git a/include/asm-arm/arch-shark/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
index 7eca6534f1b..3725e163341 100644
--- a/include/asm-arm/arch-shark/uncompress.h
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -1,9 +1,9 @@
 /*
- * linux/include/asm-arm/arch-shark/uncompress.h
+ * arch/arm/mach-shark/include/mach/uncompress.h
  * by Alexander Schulz
  *
  * derived from:
- * linux/include/asm-arm/arch-ebsa285/uncompress.h
+ * arch/arm/mach-footbridge/include/mach/uncompress.h
  * Copyright (C) 1996,1997,1998 Russell King
  */
 
diff --git a/include/asm-arm/arch-shark/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
index fac37c636b3..f6c6837c545 100644
--- a/include/asm-arm/arch-shark/vmalloc.h
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
- * linux/include/asm-arm/arch-shark/vmalloc.h
+ * arch/arm/mach-shark/include/mach/vmalloc.h
  */
 #define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 5b0c6af44ec..44b0811b400 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -4,7 +4,7 @@
  * by Alexander Schulz
  *
  * derived from linux/arch/ppc/kernel/i8259.c and:
- * include/asm-arm/arch-ebsa110/irq.h
+ * arch/arm/mach-ebsa110/include/mach/irq.h
  * Copyright (C) 1996-1998 Russell King
  */
 
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 5386a81f796..b1896471aa3 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -21,7 +21,7 @@
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a7dd09436cb..d75e795c893 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -31,7 +31,7 @@
 
 #include <asm/cnt32_to_63.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index fe106d184e6..b4ac00eacf6 100644
--- a/include/asm-arm/arch-versatile/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-versatile/debug-macro.S
+/* arch/arm/mach-versatile/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-versatile/dma.h b/arch/arm/mach-versatile/include/mach/dma.h
index 64257734862..0aabf12c883 100644
--- a/include/asm-arm/arch-versatile/dma.h
+++ b/arch/arm/mach-versatile/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-versatile/dma.h
+ *  arch/arm/mach-versatile/include/mach/dma.h
  *
  *  Copyright (C) 2003 ARM Limited.
  *  Copyright (C) 1997,1998 Russell King
diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
index 924d1a8fe36..8c802098058 100644
--- a/include/asm-arm/arch-versatile/entry-macro.S
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-versatile/entry-macro.S
+ * arch/arm/mach-versatile/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for Versatile platforms
  *
@@ -7,7 +7,7 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/vic.h>
 
 		.macro	disable_fiq
diff --git a/include/asm-arm/arch-versatile/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index edc06598d18..7aa906c9315 100644
--- a/include/asm-arm/arch-versatile/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-versatile/hardware.h
+ *  arch/arm/mach-versatile/include/mach/hardware.h
  *
  *  This file contains the hardware definitions of the Versatile boards.
  *
@@ -23,7 +23,7 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 /*
  * PCI space virtual addresses
diff --git a/include/asm-arm/arch-versatile/io.h b/arch/arm/mach-versatile/include/mach/io.h
index c4d01948e00..c0b9dd1d025 100644
--- a/include/asm-arm/arch-versatile/io.h
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-versatile/io.h
+ *  arch/arm/mach-versatile/include/mach/io.h
  *
  *  Copyright (C) 2003 ARM Limited
  *
diff --git a/include/asm-arm/arch-versatile/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index f7263b99403..216a1312e62 100644
--- a/include/asm-arm/arch-versatile/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-versatile/irqs.h
+ *  arch/arm/mach-versatile/include/mach/irqs.h
  *
  *  Copyright (C) 2003 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
@@ -19,7 +19,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 /* 
  *  IRQ interrupts definitions are the same as the INT definitions
diff --git a/include/asm-arm/arch-versatile/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
index a9370976cc5..b6315c0602a 100644
--- a/include/asm-arm/arch-versatile/memory.h
+++ b/arch/arm/mach-versatile/include/mach/memory.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-versatile/memory.h
+ *  arch/arm/mach-versatile/include/mach/memory.h
  *
  *  Copyright (C) 2003 ARM Limited
  *
diff --git a/include/asm-arm/arch-versatile/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
index 2af9d7c9c63..27cbe6a3f22 100644
--- a/include/asm-arm/arch-versatile/platform.h
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-versatile/platform.h
+ * arch/arm/mach-versatile/include/mach/platform.h
  *
  * Copyright (c) ARM Limited 2003.  All rights reserved.
  *
diff --git a/include/asm-arm/arch-versatile/system.h b/arch/arm/mach-versatile/include/mach/system.h
index 71c6254c0d9..91fa559c7cc 100644
--- a/include/asm-arm/arch-versatile/system.h
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-versatile/system.h
+ *  arch/arm/mach-versatile/include/mach/system.h
  *
  *  Copyright (C) 2003 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
@@ -21,9 +21,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-versatile/timex.h b/arch/arm/mach-versatile/include/mach/timex.h
index 38fd04fc914..426199b1add 100644
--- a/include/asm-arm/arch-versatile/timex.h
+++ b/arch/arm/mach-versatile/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-versatile/timex.h
+ *  arch/arm/mach-versatile/include/mach/timex.h
  *
  *  Versatile architecture timex specifications
  *
diff --git a/include/asm-arm/arch-versatile/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
index 7215133d051..3dd0048afb3 100644
--- a/include/asm-arm/arch-versatile/uncompress.h
+++ b/arch/arm/mach-versatile/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-versatile/uncompress.h
+ *  arch/arm/mach-versatile/include/mach/uncompress.h
  *
  *  Copyright (C) 2003 ARM Limited
  *
diff --git a/include/asm-arm/arch-versatile/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
index ac780df6215..427e3612db5 100644
--- a/include/asm-arm/arch-versatile/vmalloc.h
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-versatile/vmalloc.h
+ *  arch/arm/mach-versatile/include/mach/vmalloc.h
  *
  *  Copyright (C) 2003 ARM Limited
  *  Copyright (C) 2000 Russell King.
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index ca829015943..36f23f89650 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -22,7 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index b257ef78ef4..76375c64413 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index be439bb9d45..1725f019fc8 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 3a6c8ec34cd..ed15f876c72 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -187,7 +187,7 @@ config CPU_ARM926T
 		ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
 		ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
 		ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
-		ARCH_NS9XXX || ARCH_DAVINCI
+		ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
 	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \
 		ARCH_OMAP730 || ARCH_OMAP16XX || \
 		ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
@@ -742,3 +742,11 @@ config CACHE_L2X0
 	select OUTER_CACHE
 	help
 	  This option enables the L2x0 PrimeCell.
+
+config CACHE_XSC3L2
+	bool "Enable the L2 cache on XScale3"
+	depends on CPU_XSC3
+	default y
+	select OUTER_CACHE
+	help
+	  This option enables the L2 cache on XScale3.
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 20eec4ba173..7b5a25d8157 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -14,7 +14,7 @@
 
 #include <linux/init.h>
 #include <asm/cacheflush.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <plat/cache-feroceon-l2.h>
 
 
 /*
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index e1994788cf0..3b3639eb7ca 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index b2908063ed6..33926c9fcda 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 9bcabd86c6f..51a9b0b273b 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -13,7 +13,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
new file mode 100644
index 00000000000..158bd96763d
--- /dev/null
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -0,0 +1,182 @@
+/*
+ * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+#define CR_L2	(1 << 26)
+
+#define CACHE_LINE_SIZE		32
+#define CACHE_LINE_SHIFT	5
+#define CACHE_WAY_PER_SET	8
+
+#define CACHE_WAY_SIZE(l2ctype)	(8192 << (((l2ctype) >> 8) & 0xf))
+#define CACHE_SET_SIZE(l2ctype)	(CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT)
+
+static inline int xsc3_l2_present(void)
+{
+	unsigned long l2ctype;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	return !!(l2ctype & 0xf8);
+}
+
+static inline void xsc3_l2_clean_mva(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
+}
+
+static inline void xsc3_l2_clean_pa(unsigned long addr)
+{
+	xsc3_l2_clean_mva(__phys_to_virt(addr));
+}
+
+static inline void xsc3_l2_inv_mva(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
+}
+
+static inline void xsc3_l2_inv_pa(unsigned long addr)
+{
+	xsc3_l2_inv_mva(__phys_to_virt(addr));
+}
+
+static inline void xsc3_l2_inv_all(void)
+{
+	unsigned long l2ctype, set_way;
+	int set, way;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
+		for (way = 0; way < CACHE_WAY_PER_SET; way++) {
+			set_way = (way << 29) | (set << 5);
+			__asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way));
+		}
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
+{
+	if (start == 0 && end == -1ul) {
+		xsc3_l2_inv_all();
+		return;
+	}
+
+	/*
+	 * Clean and invalidate partial first cache line.
+	 */
+	if (start & (CACHE_LINE_SIZE - 1)) {
+		xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1));
+		xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+	}
+
+	/*
+	 * Clean and invalidate partial last cache line.
+	 */
+	if (end & (CACHE_LINE_SIZE - 1)) {
+		xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1));
+		xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+		end &= ~(CACHE_LINE_SIZE - 1);
+	}
+
+	/*
+	 * Invalidate all full cache lines between 'start' and 'end'.
+	 */
+	while (start != end) {
+		xsc3_l2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		xsc3_l2_clean_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+/*
+ * optimize L2 flush all operation by set/way format
+ */
+static inline void xsc3_l2_flush_all(void)
+{
+	unsigned long l2ctype, set_way;
+	int set, way;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
+		for (way = 0; way < CACHE_WAY_PER_SET; way++) {
+			set_way = (way << 29) | (set << 5);
+			__asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way));
+		}
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
+{
+	if (start == 0 && end == -1ul) {
+		xsc3_l2_flush_all();
+		return;
+	}
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		xsc3_l2_clean_pa(start);
+		xsc3_l2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static int __init xsc3_l2_init(void)
+{
+	if (!cpu_is_xsc3() || !xsc3_l2_present())
+		return 0;
+
+	if (!(get_cr() & CR_L2)) {
+		pr_info("XScale3 L2 cache enabled.\n");
+		adjust_cr(CR_L2, CR_L2);
+		xsc3_l2_inv_all();
+	}
+
+	outer_cache.inv_range = xsc3_l2_inv_range;
+	outer_cache.clean_range = xsc3_l2_clean_range;
+	outer_cache.flush_range = xsc3_l2_flush_range;
+
+	return 0;
+}
+core_initcall(xsc3_l2_init);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index e6352946dde..30a69d67d67 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -156,9 +156,9 @@ static int __init check_initrd(struct meminfo *mi)
 	}
 
 	if (initrd_node == -1) {
-		printk(KERN_ERR "initrd (0x%08lx - 0x%08lx) extends beyond "
+		printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond "
 		       "physical memory - disabling initrd\n",
-		       phys_initrd_start, end);
+		       phys_initrd_start, phys_initrd_size);
 		phys_initrd_start = phys_initrd_size = 0;
 	}
 #endif
@@ -239,25 +239,33 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
 			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
 
+	/*
+	 * Reserve any special node zero regions.
+	 */
+	if (node == 0)
+		reserve_node_zero(pgdat);
+
 #ifdef CONFIG_BLK_DEV_INITRD
 	/*
 	 * If the initrd is in this node, reserve its memory.
 	 */
 	if (node == initrd_node) {
-		reserve_bootmem_node(pgdat, phys_initrd_start,
-				     phys_initrd_size, BOOTMEM_DEFAULT);
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
+		int res = reserve_bootmem_node(pgdat, phys_initrd_start,
+				     phys_initrd_size, BOOTMEM_EXCLUSIVE);
+
+		if (res == 0) {
+			initrd_start = __phys_to_virt(phys_initrd_start);
+			initrd_end = initrd_start + phys_initrd_size;
+		} else {
+			printk(KERN_ERR
+				"INITRD: 0x%08lx+0x%08lx overlaps in-use "
+				"memory region - disabling initrd\n",
+				phys_initrd_start, phys_initrd_size);
+		}
 	}
 #endif
 
 	/*
-	 * Finally, reserve any node zero regions.
-	 */
-	if (node == 0)
-		reserve_node_zero(pgdat);
-
-	/*
 	 * initialise the zones within this node.
 	 */
 	memset(zone_size, 0, sizeof(zone_size));
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 303a7ff6bfd..b81dbf9ffb7 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -259,7 +259,7 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
  * caller shouldn't need to know that small detail.
  *
  * 'flags' are the extra L_PTE_ flags that you want to specify for this
- * mapping.  See include/asm-arm/proc-armv/pgtable.h for more information.
+ * mapping.  See <asm/pgtable.h> for more information.
  */
 void __iomem *
 __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 2d6d682c206..a713e40e1f1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -211,6 +211,12 @@ static struct mem_type mem_types[] = {
 				  PMD_SECT_TEX(1),
 		.domain		= DOMAIN_IO,
 	},
+	[MT_DEVICE_WC] = {	/* ioremap_wc */
+		.prot_pte	= PROT_PTE_DEVICE,
+		.prot_l1	= PMD_TYPE_TABLE,
+		.prot_sect	= PROT_SECT_DEVICE,
+		.domain		= DOMAIN_IO,
+	},
 	[MT_CACHECLEAN] = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 		.domain    = DOMAIN_KERNEL,
@@ -273,6 +279,20 @@ static void __init build_mem_type_table(void)
 	}
 
 	/*
+	 * On non-Xscale3 ARMv5-and-older systems, use CB=01
+	 * (Uncached/Buffered) for ioremap_wc() mappings.  On XScale3
+	 * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable
+	 * in xsc3 parlance, Uncached Normal in ARMv6 parlance).
+	 */
+	if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) {
+		mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1);
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
+	} else {
+		mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_BUFFERABLE;
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+	}
+
+	/*
 	 * ARMv5 and lower, bit 4 must be set for page tables.
 	 * (was: cache "update-able on write" bit on ARM610)
 	 * However, Xscale cores require this bit to be cleared.
@@ -568,6 +588,55 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 		create_mapping(io_desc + i);
 }
 
+static int __init check_membank_valid(struct membank *mb)
+{
+	/*
+	 * Check whether this memory region has non-zero size.
+	 */
+	if (mb->size == 0)
+		return 0;
+
+	/*
+	 * Check whether this memory region would entirely overlap
+	 * the vmalloc area.
+	 */
+	if (phys_to_virt(mb->start) >= VMALLOC_MIN) {
+		printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
+			"(vmalloc region overlap).\n",
+			mb->start, mb->start + mb->size - 1);
+		return 0;
+	}
+
+	/*
+	 * Check whether this memory region would partially overlap
+	 * the vmalloc area.
+	 */
+	if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) ||
+	    phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) {
+		unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start);
+
+		printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
+			"to -%.8lx (vmalloc region overlap).\n",
+			mb->start, mb->start + mb->size - 1,
+			mb->start + newsize - 1);
+		mb->size = newsize;
+	}
+
+	return 1;
+}
+
+static void __init sanity_check_meminfo(struct meminfo *mi)
+{
+	int i;
+	int j;
+
+	for (i = 0, j = 0; i < mi->nr_banks; i++) {
+		if (check_membank_valid(&mi->bank[i]))
+			mi->bank[j++] = mi->bank[i];
+	}
+	mi->nr_banks = j;
+}
+
 static inline void prepare_page_table(struct meminfo *mi)
 {
 	unsigned long addr;
@@ -753,6 +822,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
 	void *zero_page;
 
 	build_mem_type_table();
+	sanity_check_meminfo(mi);
 	prepare_page_table(mi);
 	bootmem_init(mi);
 	devicemaps_init(mdesc);
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index d64f8e6f75a..eda733d3045 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -231,7 +231,7 @@ cpu_arm720_name:
 		.align
 
 /*
- * See linux/include/asm-arm/procinfo.h for a definition of this structure.
+ * See <asm/procinfo.h> for a definition of this structure.
  */
 	
 		.section ".proc.info.init", #alloc, #execinstr
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 1a3d63df8e9..551244d5ca1 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -15,6 +15,7 @@
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
+#include "proc-macros.S"
 
 /* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
 #define CACHE_DLINESIZE	16
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 82d579ac9b9..6168c6160de 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -17,6 +17,7 @@
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
+#include "proc-macros.S"
 
 /*
  * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 9818195dbf1..bbe10576c86 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -18,7 +18,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index c5fe27ad289..871ba018252 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -23,7 +23,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 3533741a76f..7bd9e7197f6 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -28,7 +28,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/page.h>
@@ -52,11 +52,6 @@
 #define CACHESIZE	32768
 
 /*
- * Run with L2 enabled.
- */
-#define L2_CACHE_ENABLE	1
-
-/*
  * This macro is used to wait for a CP15 write and is needed when we
  * have to ensure that the last operation to the coprocessor was
  * completed before continuing with operation.
@@ -265,12 +260,9 @@ ENTRY(xsc3_dma_inv_range)
 	tst	r0, #CACHELINESIZE - 1
 	bic	r0, r0, #CACHELINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcrne	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	tst	r1, #CACHELINESIZE - 1
 	mcrne	p15, 0, r1, c7, c10, 1		@ clean L1 D line
-	mcrne	p15, 1, r1, c7, c11, 1		@ clean L2 line
 1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate L1 D line
-	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -288,7 +280,6 @@ ENTRY(xsc3_dma_inv_range)
 ENTRY(xsc3_dma_clean_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -306,8 +297,6 @@ ENTRY(xsc3_dma_clean_range)
 ENTRY(xsc3_dma_flush_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
-	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
-	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -347,9 +336,7 @@ ENTRY(cpu_xsc3_switch_mm)
 	mcr	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
 	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
-#ifdef L2_CACHE_ENABLE
 	orr	r0, r0, #0x18			@ cache the page table in L2
-#endif
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	cpwait_ret lr, ip
@@ -378,12 +365,10 @@ ENTRY(cpu_xsc3_set_pte_ext)
 	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
 						@ combined with user -> user r/w
 
-#if L2_CACHE_ENABLE
 	@ If it's cacheable, it needs to be in L2 also.
 	eor	ip, r1, #L_PTE_CACHEABLE
 	tst	ip, #L_PTE_CACHEABLE
 	orreq	r2, r2, #PTE_EXT_TEX(0x5)
-#endif
 
 	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
 	movne	r2, #0				@ no -> fault
@@ -408,9 +393,7 @@ __xsc3_setup:
 	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
-#if L2_CACHE_ENABLE
 	orr	r4, r4, #0x18			@ cache the page table in L2
-#endif
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
 
 	mov	r0, #0				@ don't allow CP access
@@ -418,9 +401,7 @@ __xsc3_setup:
 
 	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
 	and	r0, r0, #2			@ preserve bit P bit setting
-#if L2_CACHE_ENABLE
 	orr	r0, r0, #(1 << 10)		@ enable L2 for LLR cache
-#endif
 	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
 
 	adr	r5, xsc3_crval
@@ -429,9 +410,6 @@ __xsc3_setup:
 	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
 	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)
 						@ ...I Z..S .... .... (uc)
-#if L2_CACHE_ENABLE
-	orr 	r0, r0, #0x04000000		@ L2 enable
-#endif
 	mov	pc, lr
 
 	.size	__xsc3_setup, . - __xsc3_setup
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index 4a4d02c0911..386cbd13eaf 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -69,7 +69,7 @@ typedef union tagFPREG {
  * This structure is exported to user space.  Do not re-order.
  * Only add new stuff to the end, and do not change the size of
  * any element.  Elements of this structure are used by user
- * space, and must match struct user_fp in include/asm-arm/user.h.
+ * space, and must match struct user_fp in <asm/user.h>.
  * We include the byte offsets below for documentation purposes.
  *
  * The size of this structure and FPREG are checked by fpmodule.c
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 4458705021e..92db6e035c6 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 
 #include "op_counter.h"
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index 53c5e9a52eb..f7242082161 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <asm/hardware/iop3xx.h>
 #include <linux/dma-mapping.h>
-#include <asm/arch/adma.h>
+#include <mach/adma.h>
 #include <asm/hardware/iop_adma.h>
 
 #ifdef CONFIG_ARCH_IOP32X
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
index e99909bdba7..6dcbcc4ad41 100644
--- a/arch/arm/plat-iop/i2c.c
+++ b/arch/arm/plat-iop/i2c.c
@@ -25,9 +25,8 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #ifdef CONFIG_ARCH_IOP32X
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
index 498675d028d..39dcfb4bdc7 100644
--- a/arch/arm/plat-iop/io.c
+++ b/arch/arm/plat-iop/io.c
@@ -18,7 +18,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index d9bc15a69e5..54708bf9cb1 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -21,10 +21,9 @@
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/pci.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 
 // #define DEBUG
 
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 6fe481ff4fd..c53fefb6aac 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,13 +18,13 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/timex.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 static unsigned long ticks_per_jiffy;
 static unsigned long ticks_per_usec;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 1aa86fd60d7..0a38f0b396e 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -37,9 +37,8 @@
 #include <linux/proc_fs.h>
 #include <linux/semaphore.h>
 #include <linux/string.h>
-#include <linux/version.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 318b268f938..733e0acac91 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm-generic/bug.h>
 
 static struct mxc_gpio_port *mxc_gpio_ports;
diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 61e66dac90e..61e66dac90e 100644
--- a/include/asm-arm/arch-mxc/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 1bc6fb0f9a8..1bc6fb0f9a8 100644
--- a/include/asm-arm/arch-mxc/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index e4e5cf5ad7d..e4e5cf5ad7d 100644
--- a/include/asm-arm/arch-mxc/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index 82232ba3c8f..82232ba3c8f 100644
--- a/include/asm-arm/arch-mxc/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 750c62afd90..750c62afd90 100644
--- a/include/asm-arm/arch-mxc/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
diff --git a/include/asm-arm/arch-mxc/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 24caa2b7c91..24caa2b7c91 100644
--- a/include/asm-arm/arch-mxc/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
diff --git a/include/asm-arm/arch-mxc/common.h b/arch/arm/plat-mxc/include/mach/common.h
index a6d2e24aab1..a6d2e24aab1 100644
--- a/include/asm-arm/arch-mxc/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 575087f8561..b9907bebba3 100644
--- a/include/asm-arm/arch-mxc/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-imx/debug-macro.S
+/* arch/arm/mach-imx/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
@@ -11,22 +11,22 @@
  *
  */
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #ifdef CONFIG_MACH_MX31ADS
-#include <asm/arch/board-mx31ads.h>
+#include <mach/board-mx31ads.h>
 #endif
 #ifdef CONFIG_MACH_PCM037
-#include <asm/arch/board-pcm037.h>
+#include <mach/board-pcm037.h>
 #endif
 #ifdef CONFIG_MACH_MX31LITE
-#include <asm/arch/board-mx31lite.h>
+#include <mach/board-mx31lite.h>
 #endif
 #ifdef CONFIG_MACH_MX27ADS
-#include <asm/arch/board-mx27ads.h>
+#include <mach/board-mx27ads.h>
 #endif
 #ifdef CONFIG_MACH_PCM038
-#include <asm/arch/board-pcm038.h>
+#include <mach/board-pcm038.h>
 #endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-mxc/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
index c822d569a05..c822d569a05 100644
--- a/include/asm-arm/arch-mxc/dma.h
+++ b/arch/arm/plat-mxc/include/mach/dma.h
diff --git a/include/asm-arm/arch-mxc/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index b542433afb1..b542433afb1 100644
--- a/include/asm-arm/arch-mxc/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
diff --git a/include/asm-arm/arch-mxc/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index d393e15f5a6..65eedc0d196 100644
--- a/include/asm-arm/arch-mxc/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_GPIO_H__
 #define __ASM_ARCH_MXC_GPIO_H__
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 
 /* use gpiolib dispatchers */
diff --git a/include/asm-arm/arch-mxc/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 37cddbaaade..3caadeeda70 100644
--- a/include/asm-arm/arch-mxc/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -23,15 +23,15 @@
 #include <asm/sizes.h>
 
 #ifdef CONFIG_ARCH_MX3
-# include <asm/arch/mx31.h>
+# include <mach/mx31.h>
 #endif
 
 #ifdef CONFIG_ARCH_MX2
 # ifdef CONFIG_MACH_MX27
-#  include <asm/arch/mx27.h>
+#  include <mach/mx27.h>
 # endif
 #endif
 
-#include <asm/arch/mxc.h>
+#include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/iim.h b/arch/arm/plat-mxc/include/mach/iim.h
index 315bffadafd..315bffadafd 100644
--- a/include/asm-arm/arch-mxc/iim.h
+++ b/arch/arm/plat-mxc/include/mach/iim.h
diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 83fb72c4048..83fb72c4048 100644
--- a/include/asm-arm/arch-mxc/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
diff --git a/include/asm-arm/arch-mxc/io.h b/arch/arm/plat-mxc/include/mach/io.h
index 65b6810124c..65b6810124c 100644
--- a/include/asm-arm/arch-mxc/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
index 076d37b38eb..076d37b38eb 100644
--- a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 7509e7692f0..7509e7692f0 100644
--- a/include/asm-arm/arch-mxc/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
diff --git a/include/asm-arm/arch-mxc/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index f416130718c..228c4f68ccd 100644
--- a/include/asm-arm/arch-mxc/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -11,6 +11,6 @@
 #ifndef __ASM_ARCH_MXC_IRQS_H__
 #define __ASM_ARCH_MXC_IRQS_H__
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/include/asm-arm/arch-mxc/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 059f83023a1..d7a8d3ebed5 100644
--- a/include/asm-arm/arch-mxc/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_MXC_MEMORY_H__
 #define __ASM_ARCH_MXC_MEMORY_H__
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Virtual view <-> DMA view memory address translations
diff --git a/include/asm-arm/arch-mxc/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 212ecc24662..212ecc24662 100644
--- a/include/asm-arm/arch-mxc/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
diff --git a/include/asm-arm/arch-mxc/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index a7373e4a56c..a7373e4a56c 100644
--- a/include/asm-arm/arch-mxc/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
diff --git a/include/asm-arm/arch-mxc/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 332eda4dbd3..332eda4dbd3 100644
--- a/include/asm-arm/arch-mxc/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
index 6cb11f4f1a0..130aebfbe16 100644
--- a/include/asm-arm/arch-mxc/mxc_timer.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_timer.h
@@ -24,7 +24,7 @@
 #define __PLAT_MXC_TIMER_H
 
 #include <linux/clk.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #ifdef CONFIG_ARCH_IMX
 #define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
diff --git a/include/asm-arm/arch-mxc/system.h b/arch/arm/plat-mxc/include/mach/system.h
index bbfc37465fc..bbfc37465fc 100644
--- a/include/asm-arm/arch-mxc/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
diff --git a/include/asm-arm/arch-mxc/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 59019fa58f8..0b0af0253e9 100644
--- a/include/asm-arm/arch-mxc/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -20,6 +20,6 @@
 #ifndef __ASM_ARCH_MXC_TIMEX_H__
 #define __ASM_ARCH_MXC_TIMEX_H__
 
-#include <asm/hardware.h>	/* for CLOCK_TICK_RATE */
+#include <mach/hardware.h>	/* for CLOCK_TICK_RATE */
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/include/asm-arm/arch-mxc/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 42cc0cb3fef..de6fe036598 100644
--- a/include/asm-arm/arch-mxc/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -1,5 +1,5 @@
 /*
- *  include/asm-arm/arch-mxc/uncompress.h
+ *  arch/arm/plat-mxc/include/mach/uncompress.h
  *
  *
  *
@@ -25,7 +25,7 @@
 
 #define __MXC_BOOT_UNCOMPRESS
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
 
diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
index 62d97623412..62d97623412 100644
--- a/include/asm-arm/arch-mxc/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index 1985571eb40..d97387aa9a4 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -30,9 +30,9 @@
 #include <linux/string.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/iomux-mx1-mx2.h>
 
 void mxc_gpio_mode(int gpio_mode)
 {
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 1fbe01da692..1053b666c67 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -19,7 +19,7 @@
 
 #include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 #define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
 #define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 3bf86343fdf..fd28f5194f7 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -26,10 +26,10 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/time.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mxc_timer.h>
+#include <mach/common.h>
+#include <mach/mxc_timer.h>
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index c2e741de020..197974defbe 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -10,7 +10,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -26,7 +25,7 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 8d04929a3c7..f4dff423ae7 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -19,20 +19,20 @@
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index d719c15daa5..ae1de308aaa 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -21,7 +21,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index f455233af08..5b73bb27445 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,11 +13,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 9128a80d228..9422dee7de8 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -13,13 +13,13 @@
 #include <linux/leds.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 81002b722da..01da719a745 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -14,17 +14,18 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
+#include <mach/mcbsp.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
@@ -194,25 +195,38 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define	OMAP_MMC1_BASE		0x4809c000
-#define OMAP_MMC1_INT		INT_24XX_MMC_IRQ
+#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x1fc)
+#define	OMAP_MMC1_INT		INT_24XX_MMC_IRQ
+
+#define	OMAP_MMC2_BASE		0x480b4000
+#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x1fc)
+#define	OMAP_MMC2_INT		INT_24XX_MMC2_IRQ
+
 #else
+
 #define	OMAP_MMC1_BASE		0xfffb7800
+#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x7f)
 #define OMAP_MMC1_INT		INT_MMC
-#endif
+
 #define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x7f)
+#define	OMAP_MMC2_INT		INT_1610_MMC2
+
+#endif
 
-static struct omap_mmc_conf mmc1_conf;
+static struct omap_mmc_platform_data mmc1_data;
 
 static u64 mmc1_dmamask = 0xffffffff;
 
 static struct resource mmc1_resources[] = {
 	{
 		.start		= OMAP_MMC1_BASE,
-		.end		= OMAP_MMC1_BASE + 0x7f,
+		.end		= OMAP_MMC1_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
@@ -226,26 +240,27 @@ static struct platform_device mmc_omap_device1 = {
 	.id		= 1,
 	.dev = {
 		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_conf,
+		.platform_data	= &mmc1_data,
 	},
 	.num_resources	= ARRAY_SIZE(mmc1_resources),
 	.resource	= mmc1_resources,
 };
 
-#ifdef	CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
 
-static struct omap_mmc_conf mmc2_conf;
+static struct omap_mmc_platform_data mmc2_data;
 
 static u64 mmc2_dmamask = 0xffffffff;
 
 static struct resource mmc2_resources[] = {
 	{
 		.start		= OMAP_MMC2_BASE,
-		.end		= OMAP_MMC2_BASE + 0x7f,
+		.end		= OMAP_MMC2_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_1610_MMC2,
+		.start		= OMAP_MMC2_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -255,26 +270,19 @@ static struct platform_device mmc_omap_device2 = {
 	.id		= 2,
 	.dev = {
 		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_conf,
+		.platform_data	= &mmc2_data,
 	},
 	.num_resources	= ARRAY_SIZE(mmc2_resources),
 	.resource	= mmc2_resources,
 };
 #endif
 
-static void __init omap_init_mmc(void)
+static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
 {
-	const struct omap_mmc_config	*mmc_conf;
-	const struct omap_mmc_conf	*mmc;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
+	if (cpu_is_omap2430() || cpu_is_omap34xx())
 		return;
 
-	/* block 1 is always available and has just one pinout option */
-	mmc = &mmc_conf->mmc[0];
-	if (mmc->enabled) {
+	if (mmc_conf->mmc[0].enabled) {
 		if (cpu_is_omap24xx()) {
 			omap_cfg_reg(H18_24XX_MMC_CMD);
 			omap_cfg_reg(H15_24XX_MMC_CLKI);
@@ -292,7 +300,7 @@ static void __init omap_init_mmc(void)
 				omap_cfg_reg(P20_1710_MMC_DATDIR0);
 			}
 		}
-		if (mmc->wire4) {
+		if (mmc_conf->mmc[0].wire4) {
 			if (cpu_is_omap24xx()) {
 				omap_cfg_reg(H14_24XX_MMC_DAT1);
 				omap_cfg_reg(E19_24XX_MMC_DAT2);
@@ -303,25 +311,22 @@ static void __init omap_init_mmc(void)
 			} else {
 				omap_cfg_reg(MMC_DAT1);
 				/* NOTE:  DAT2 can be on W10 (here) or M15 */
-				if (!mmc->nomux)
+				if (!mmc_conf->mmc[0].nomux)
 					omap_cfg_reg(MMC_DAT2);
 				omap_cfg_reg(MMC_DAT3);
 			}
 		}
-		mmc1_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device1);
 	}
 
 #ifdef	CONFIG_ARCH_OMAP16XX
 	/* block 2 is on newer chips, and has many pinout options */
-	mmc = &mmc_conf->mmc[1];
-	if (mmc->enabled) {
-		if (!mmc->nomux) {
+	if (mmc_conf->mmc[1].enabled) {
+		if (!mmc_conf->mmc[1].nomux) {
 			omap_cfg_reg(Y8_1610_MMC2_CMD);
 			omap_cfg_reg(Y10_1610_MMC2_CLK);
 			omap_cfg_reg(R18_1610_MMC2_CLKIN);
 			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc->wire4) {
+			if (mmc_conf->mmc[1].wire4) {
 				omap_cfg_reg(V8_1610_MMC2_DAT1);
 				omap_cfg_reg(W15_1610_MMC2_DAT2);
 				omap_cfg_reg(R10_1610_MMC2_DAT3);
@@ -337,14 +342,55 @@ static void __init omap_init_mmc(void)
 		if (cpu_is_omap1710())
 			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
 				     MOD_CONF_CTRL_1);
-		mmc2_conf = *mmc;
+	}
+#endif
+}
+
+static void __init omap_init_mmc(void)
+{
+	const struct omap_mmc_config	*mmc_conf;
+
+	/* NOTE:  assumes MMC was never (wrongly) enabled */
+	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+	if (!mmc_conf)
+		return;
+
+	omap_init_mmc_conf(mmc_conf);
+
+	if (mmc_conf->mmc[0].enabled) {
+		mmc1_data.conf = mmc_conf->mmc[0];
+		(void) platform_device_register(&mmc_omap_device1);
+	}
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
+	if (mmc_conf->mmc[1].enabled) {
+		mmc2_data.conf = mmc_conf->mmc[1];
 		(void) platform_device_register(&mmc_omap_device2);
 	}
 #endif
-	return;
 }
+
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
+{
+	switch (host) {
+	case 1:
+		mmc1_data = *info;
+		break;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
+	case 2:
+		mmc2_data = *info;
+		break;
+#endif
+	default:
+		BUG();
+	}
+}
+
 #else
 static inline void omap_init_mmc(void) {}
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
 #endif
 
 /*-------------------------------------------------------------------------*/
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index fac8e994f58..a63b644ad30 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -28,10 +28,10 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index f22506af0e6..743a4abcd85 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -32,10 +32,10 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <asm/hardware.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/hardware.h>
+#include <mach/dmtimer.h>
 #include <asm/io.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 /* register offsets */
 #define _OMAP_TIMER_ID_OFFSET		0x00
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 5d107520e6b..17a92a31e74 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -28,14 +28,13 @@
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
+#include <mach/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 63e094342ef..9e1341ebc14 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
 #include <asm/mach/irq.h>
 
 #include <asm/io.h>
@@ -1488,7 +1488,7 @@ static int __init _omap_gpio_init(void)
 		bank->chip.set = gpio_set;
 		if (bank_is_mpuio(bank)) {
 			bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP1
+#ifdef CONFIG_ARCH_OMAP16XX
 			bank->chip.dev = &omap_mpuio_device.dev;
 #endif
 			bank->chip.base = OMAP_MPUIO(0);
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 7990ab185bb..0e6d147ab6f 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,8 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
diff --git a/include/asm-arm/arch-omap/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
index aec2d656362..5ccedac7752 100644
--- a/include/asm-arm/arch-omap/aic23.h
+++ b/arch/arm/plat-omap/include/mach/aic23.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/aic23.h
+ * arch/arm/plat-omap/include/mach/aic23.h
  *
  * Hardware definitions for TI TLV320AIC23 audio codec
  *
diff --git a/include/asm-arm/arch-omap/blizzard.h b/arch/arm/plat-omap/include/mach/blizzard.h
index 8d160f17137..8d160f17137 100644
--- a/include/asm-arm/arch-omap/blizzard.h
+++ b/arch/arm/plat-omap/include/mach/blizzard.h
diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
index c7db9004ec3..cf1dc022394 100644
--- a/include/asm-arm/arch-omap/board-2430sdp.h
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-2430sdp.h
+ * arch/arm/plat-omap/include/mach/board-2430sdp.h
  *
  * Hardware definitions for TI OMAP2430 SDP board.
  *
diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/arch/arm/plat-omap/include/mach/board-ams-delta.h
index 9aee15d9714..51b102dc906 100644
--- a/include/asm-arm/arch-omap/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/mach/board-ams-delta.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-ams-delta.h
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
  *
  * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
  *
diff --git a/include/asm-arm/arch-omap/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index 547125a4695..d6f2a8e963d 100644
--- a/include/asm-arm/arch-omap/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-apollon.h
+ * arch/arm/plat-omap/include/mach/board-apollon.h
  *
  * Hardware definitions for Samsung OMAP24XX Apollon board.
  *
diff --git a/include/asm-arm/arch-omap/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h
index 89a1e529fb6..cb3c5ae1277 100644
--- a/include/asm-arm/arch-omap/board-fsample.h
+++ b/arch/arm/plat-omap/include/mach/board-fsample.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-fsample.h
+ * arch/arm/plat-omap/include/mach/board-fsample.h
  *
  * Board-specific goodies for TI F-Sample.
  *
@@ -15,7 +15,7 @@
 #define __ASM_ARCH_OMAP_FSAMPLE_H
 
 /* fsample is pretty close to p2-sample */
-#include <asm/arch/board-perseus2.h>
+#include <mach/board-perseus2.h>
 
 #define fsample_cpld_read(reg) __raw_readb(reg)
 #define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
diff --git a/include/asm-arm/arch-omap/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h
index c322796d0d2..2a050e9be65 100644
--- a/include/asm-arm/arch-omap/board-h2.h
+++ b/arch/arm/plat-omap/include/mach/board-h2.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-h2.h
+ * arch/arm/plat-omap/include/mach/board-h2.h
  *
  * Hardware definitions for TI OMAP1610 H2 board.
  *
diff --git a/include/asm-arm/arch-omap/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
index c5d0f32a40a..14909dc7858 100644
--- a/include/asm-arm/arch-omap/board-h3.h
+++ b/arch/arm/plat-omap/include/mach/board-h3.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-h3.h
+ * arch/arm/plat-omap/include/mach/board-h3.h
  *
  * Copyright (C) 2001 RidgeRun, Inc.
  * Copyright (C) 2004 Texas Instruments, Inc.
diff --git a/include/asm-arm/arch-omap/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
index 7e0efef4bb6..1470cd3e519 100644
--- a/include/asm-arm/arch-omap/board-h4.h
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-h4.h
+ * arch/arm/plat-omap/include/mach/board-h4.h
  *
  * Hardware definitions for TI OMAP1610 H4 board.
  *
diff --git a/include/asm-arm/arch-omap/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h
index 9ca03dec9d3..5ae3e79b9f9 100644
--- a/include/asm-arm/arch-omap/board-innovator.h
+++ b/arch/arm/plat-omap/include/mach/board-innovator.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-innovator.h
+ * arch/arm/plat-omap/include/mach/board-innovator.h
  *
  * Copyright (C) 2001 RidgeRun, Inc.
  *
diff --git a/include/asm-arm/arch-omap/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h
index 72deea20349..2abbe001af8 100644
--- a/include/asm-arm/arch-omap/board-nokia.h
+++ b/arch/arm/plat-omap/include/mach/board-nokia.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/board-nokia.h
+ *  arch/arm/plat-omap/include/mach/board-nokia.h
  *
  *  Information structures for Nokia-specific board config data
  *
diff --git a/include/asm-arm/arch-omap/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h
index 94926090e47..3850cb1f220 100644
--- a/include/asm-arm/arch-omap/board-osk.h
+++ b/arch/arm/plat-omap/include/mach/board-osk.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-osk.h
+ * arch/arm/plat-omap/include/mach/board-osk.h
  *
  * Hardware definitions for TI OMAP5912 OSK board.
  *
diff --git a/include/asm-arm/arch-omap/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h
index 6fac2c8935b..6906cdebbcf 100644
--- a/include/asm-arm/arch-omap/board-palmte.h
+++ b/arch/arm/plat-omap/include/mach/board-palmte.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-palmte.h
+ * arch/arm/plat-omap/include/mach/board-palmte.h
  *
  * Hardware definitions for the Palm Tungsten E device.
  *
diff --git a/include/asm-arm/arch-omap/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h
index d9590b0ec90..e79f382b593 100644
--- a/include/asm-arm/arch-omap/board-palmtt.h
+++ b/arch/arm/plat-omap/include/mach/board-palmtt.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-palmte.h
+ * arch/arm/plat-omap/include/mach/board-palmte.h
  *
  * Hardware definitions for the Palm Tungsten|T device.
  *
diff --git a/include/asm-arm/arch-omap/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h
index 1252a859787..b1d7d579b31 100644
--- a/include/asm-arm/arch-omap/board-palmz71.h
+++ b/arch/arm/plat-omap/include/mach/board-palmz71.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/board-palmz71.h
+ * arch/arm/plat-omap/include/mach/board-palmz71.h
  *
  * Hardware definitions for the Palm Zire71 device.
  *
diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h
index d7429cb0f72..c06c3d717d5 100644
--- a/include/asm-arm/arch-omap/board-perseus2.h
+++ b/arch/arm/plat-omap/include/mach/board-perseus2.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/board-perseus2.h
+ *  arch/arm/plat-omap/include/mach/board-perseus2.h
  *
  *  Copyright 2003 by Texas Instruments Incorporated
  *    OMAP730 / Perseus2 support by Jean Pihet
@@ -30,7 +30,7 @@
 #ifndef __ASM_ARCH_OMAP_PERSEUS2_H
 #define __ASM_ARCH_OMAP_PERSEUS2_H
 
-#include <asm/arch/fpga.h>
+#include <mach/fpga.h>
 
 #ifndef OMAP_SDRAM_DEVICE
 #define OMAP_SDRAM_DEVICE		D256M_1X16_4B
diff --git a/include/asm-arm/arch-omap/board-sx1.h b/arch/arm/plat-omap/include/mach/board-sx1.h
index 355adbdaae3..355adbdaae3 100644
--- a/include/asm-arm/arch-omap/board-sx1.h
+++ b/arch/arm/plat-omap/include/mach/board-sx1.h
diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h
index ed6d346ee12..ed6d346ee12 100644
--- a/include/asm-arm/arch-omap/board-voiceblue.h
+++ b/arch/arm/plat-omap/include/mach/board-voiceblue.h
diff --git a/include/asm-arm/arch-omap/board.h b/arch/arm/plat-omap/include/mach/board.h
index db44c5d1f1a..54445642f35 100644
--- a/include/asm-arm/arch-omap/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/board.h
+ *  arch/arm/plat-omap/include/mach/board.h
  *
  *  Information structures for board-specific data
  *
@@ -12,7 +12,7 @@
 
 #include <linux/types.h>
 
-#include <asm/arch/gpio-switch.h>
+#include <mach/gpio-switch.h>
 
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
@@ -125,7 +125,7 @@ struct omap_pwm_led_platform_data {
 	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
 };
 
-/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
 struct omap_gpio_switch_config {
 	char name[12];
 	u16 gpio;
@@ -154,7 +154,7 @@ struct omap_version_config {
 };
 
 
-#include <asm-arm/arch-omap/board-nokia.h>
+#include <mach/board-nokia.h>
 
 struct omap_board_config_entry {
 	u16 tag;
diff --git a/include/asm-arm/arch-omap/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 4c7b3514f71..92f7c7238fc 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/clock.h
+ *  arch/arm/plat-omap/include/mach/clock.h
  *
  *  Copyright (C) 2004 - 2005 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
diff --git a/include/asm-arm/arch-omap/common.h b/arch/arm/plat-omap/include/mach/common.h
index 8ac03071f60..06093112b66 100644
--- a/include/asm-arm/arch-omap/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/common.h
+ * arch/arm/plat-omap/include/mach/common.h
  *
  * Header for code common to all OMAP machines.
  *
diff --git a/include/asm-arm/arch-omap/control.h b/arch/arm/plat-omap/include/mach/control.h
index 987553e3eeb..e3fd62d9a99 100644
--- a/include/asm-arm/arch-omap/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -2,7 +2,7 @@
 #define __ASM_ARCH_CONTROL_H
 
 /*
- * include/asm-arm/arch-omap/control.h
+ * arch/arm/plat-omap/include/mach/control.h
  *
  * OMAP2/3 System Control Module definitions
  *
@@ -16,7 +16,7 @@
  * the Free Software Foundation.
  */
 
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 #define OMAP242X_CTRL_REGADDR(reg)					\
 	(void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
diff --git a/include/asm-arm/arch-omap/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 52db09f8328..05aee0eda34 100644
--- a/include/asm-arm/arch-omap/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/cpu.h
+ * arch/arm/plat-omap/include/mach/cpu.h
  *
  * OMAP cpu type detection
  *
diff --git a/include/asm-arm/arch-omap/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index ca4f577f967..1b0039bdeb4 100644
--- a/include/asm-arm/arch-omap/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-omap/debug-macro.S
+/* arch/arm/plat-omap/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
diff --git a/include/asm-arm/arch-omap/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index f4dcb958786..54fe9665b18 100644
--- a/include/asm-arm/arch-omap/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/dma.h
+ *  arch/arm/plat-omap/include/mach/dma.h
  *
  *  Copyright (C) 2003 Nokia Corporation
  *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h
index 02b29e8437a..6dc70313821 100644
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ b/arch/arm/plat-omap/include/mach/dmtimer.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/dmtimer.h
+ * arch/arm/plat-omap/include/mach/dmtimer.h
  *
  * OMAP Dual-Mode Timers
  *
diff --git a/include/asm-arm/arch-omap/dsp_common.h b/arch/arm/plat-omap/include/mach/dsp_common.h
index da97736f3ef..da97736f3ef 100644
--- a/include/asm-arm/arch-omap/dsp_common.h
+++ b/arch/arm/plat-omap/include/mach/dsp_common.h
diff --git a/include/asm-arm/arch-omap/eac.h b/arch/arm/plat-omap/include/mach/eac.h
index ccee3b0700b..9e62cf03027 100644
--- a/include/asm-arm/arch-omap/eac.h
+++ b/arch/arm/plat-omap/include/mach/eac.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap2/eac.h
+ * arch/arm/plat-omap/include/mach2/eac.h
  *
  * Defines for Enhanced Audio Controller
  *
@@ -27,8 +27,8 @@
 #ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
 #define __ASM_ARM_ARCH_OMAP2_EAC_H
 
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <sound/core.h>
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 369093a45fc..d4e9043bf20 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-omap/entry-macro.S
+ * arch/arm/plat-omap/include/mach/entry-macro.S
  *
  * Low-level IRQ helper macros for OMAP-based platforms
  *
@@ -7,9 +7,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <asm/hardware.h>
-#include <asm/arch/io.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
 
 #if defined(CONFIG_ARCH_OMAP1)
 
@@ -57,7 +57,7 @@
 
 #elif defined(CONFIG_ARCH_OMAP24XX)
 
-#include <asm/arch/omap24xx.h>
+#include <mach/omap24xx.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-omap/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h
index f420881d2a3..c92e4b42b28 100644
--- a/include/asm-arm/arch-omap/fpga.h
+++ b/arch/arm/plat-omap/include/mach/fpga.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/fpga.h
+ * arch/arm/plat-omap/include/mach/fpga.h
  *
  * Interrupt handler for OMAP-1510 FPGA
  *
diff --git a/include/asm-arm/arch-omap/gpio-switch.h b/arch/arm/plat-omap/include/mach/gpio-switch.h
index 10da0e07c0c..10da0e07c0c 100644
--- a/include/asm-arm/arch-omap/gpio-switch.h
+++ b/arch/arm/plat-omap/include/mach/gpio-switch.h
diff --git a/include/asm-arm/arch-omap/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 5ee6a49864c..94ce2780e8e 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/gpio.h
+ * arch/arm/plat-omap/include/mach/gpio.h
  *
  * OMAP GPIO handling defines and functions
  *
@@ -26,7 +26,7 @@
 #ifndef __ASM_ARCH_OMAP_GPIO_H
 #define __ASM_ARCH_OMAP_GPIO_H
 
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define OMAP_MPUIO_BASE			(void __iomem *)0xfffb5000
diff --git a/include/asm-arm/arch-omap/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h
index 4eed1f80e2f..90444a0d6b1 100644
--- a/include/asm-arm/arch-omap/gpioexpander.h
+++ b/arch/arm/plat-omap/include/mach/gpioexpander.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/gpioexpander.h
+ * arch/arm/plat-omap/include/mach/gpioexpander.h
  *
  *
  * Copyright (C) 2004 Texas Instruments, Inc.
diff --git a/include/asm-arm/arch-omap/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 6a8e07ffc2d..6a8e07ffc2d 100644
--- a/include/asm-arm/arch-omap/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
diff --git a/include/asm-arm/arch-omap/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 45fdfccbd5d..07f5d7f2152 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/hardware.h
+ * arch/arm/plat-omap/include/mach/hardware.h
  *
  * Hardware definitions for TI OMAP processors and boards
  *
@@ -39,9 +39,9 @@
 #include <asm/sizes.h>
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
-#include <asm/arch/cpu.h>
+#include <mach/cpu.h>
 #endif
-#include <asm/arch/serial.h>
+#include <mach/serial.h>
 
 /*
  * ---------------------------------------------------------------------------
diff --git a/include/asm-arm/arch-omap/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
index 577f492f2d3..577f492f2d3 100644
--- a/include/asm-arm/arch-omap/hwa742.h
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
diff --git a/include/asm-arm/arch-omap/io.h b/arch/arm/plat-omap/include/mach/io.h
index 0b13557fd30..2a30b7d88cd 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -1,9 +1,9 @@
 /*
- * linux/include/asm-arm/arch-omap/io.h
+ * arch/arm/plat-omap/include/mach/io.h
  *
  * IO definitions for TI OMAP processors and boards
  *
- * Copied from linux/include/asm-arm/arch-sa1100/io.h
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
  * Copyright (C) 1997-1999 Russell King
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -34,7 +34,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-omap/irda.h b/arch/arm/plat-omap/include/mach/irda.h
index 96bb12fab43..8372a00d8e0 100644
--- a/include/asm-arm/arch-omap/irda.h
+++ b/arch/arm/plat-omap/include/mach/irda.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/irda.h
+ *  arch/arm/plat-omap/include/mach/irda.h
  *
  *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
  *
diff --git a/include/asm-arm/arch-omap/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 7464c694859..17248bbf3f2 100644
--- a/include/asm-arm/arch-omap/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/irqs.h
+ *  arch/arm/plat-omap/include/mach/irqs.h
  *
  *  Copyright (C) Greg Lonnon 2001
  *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
@@ -327,6 +327,6 @@
 extern void omap_init_irq(void);
 #endif
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #endif
diff --git a/include/asm-arm/arch-omap/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index b7f83075436..232923aaf61 100644
--- a/include/asm-arm/arch-omap/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/keypad.h
+ *  arch/arm/plat-omap/include/mach/keypad.h
  *
  *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
  *
diff --git a/include/asm-arm/arch-omap/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h
index f8fbc4801e5..f8fbc4801e5 100644
--- a/include/asm-arm/arch-omap/lcd_mipid.h
+++ b/arch/arm/plat-omap/include/mach/lcd_mipid.h
diff --git a/include/asm-arm/arch-omap/led.h b/arch/arm/plat-omap/include/mach/led.h
index f3acae28e2d..25e451e7e2f 100644
--- a/include/asm-arm/arch-omap/led.h
+++ b/arch/arm/plat-omap/include/mach/led.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/led.h
+ *  arch/arm/plat-omap/include/mach/led.h
  *
  *  Copyright (C) 2006 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
diff --git a/include/asm-arm/arch-omap/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
index 7cbed9332e1..7cbed9332e1 100644
--- a/include/asm-arm/arch-omap/mailbox.h
+++ b/arch/arm/plat-omap/include/mach/mailbox.h
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 26c78f67dc8..8fdb95e26fc 100644
--- a/include/asm-arm/arch-omap/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/mcbsp.h
+ * arch/arm/plat-omap/include/mach/mcbsp.h
  *
  * Defines for Multi-Channel Buffered Serial Port
  *
@@ -27,8 +27,8 @@
 #include <linux/completion.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/clock.h>
+#include <mach/hardware.h>
+#include <mach/clock.h>
 
 #define OMAP730_MCBSP1_BASE	0xfffb1000
 #define OMAP730_MCBSP2_BASE	0xfffb1800
@@ -315,6 +315,7 @@ struct omap_mcbsp_ops {
 };
 
 struct omap_mcbsp_platform_data {
+	unsigned long phys_base;
 	u32 virt_base;
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
@@ -324,6 +325,7 @@ struct omap_mcbsp_platform_data {
 
 struct omap_mcbsp {
 	struct device *dev;
+	unsigned long phys_base;
 	u32 io_base;
 	u8 id;
 	u8 free;
diff --git a/include/asm-arm/arch-omap/mcspi.h b/arch/arm/plat-omap/include/mach/mcspi.h
index 1254e4945b6..1254e4945b6 100644
--- a/include/asm-arm/arch-omap/mcspi.h
+++ b/arch/arm/plat-omap/include/mach/mcspi.h
diff --git a/include/asm-arm/arch-omap/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 14cba97c18a..a325caf80d0 100644
--- a/include/asm-arm/arch-omap/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -1,12 +1,12 @@
 /*
- * linux/include/asm-arm/arch-omap/memory.h
+ * arch/arm/plat-omap/include/mach/memory.h
  *
  * Memory map for OMAP-1510 and 1610
  *
  * Copyright (C) 2000 RidgeRun, Inc.
  * Author: Greg Lonnon <glonnon@ridgerun.com>
  *
- * This file was derived from linux/include/asm-arm/arch-intergrator/memory.h
+ * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
  * Copyright (C) 1999 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -76,13 +76,14 @@
 					(dma_addr_t)virt_to_lbus(page_address(page)) : \
 					(dma_addr_t)__virt_to_bus(page_address(page));})
 
-#define __arch_dma_to_virt(dev, addr)	({is_lbus_device(dev) ? \
-					lbus_to_virt(addr) : \
-					__bus_to_virt(addr);})
+#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
+						lbus_to_virt(addr) : \
+						__bus_to_virt(addr)); })
 
-#define __arch_virt_to_dma(dev, addr)	({is_lbus_device(dev) ? \
-					virt_to_lbus(addr) : \
-					__virt_to_bus(addr);})
+#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
+					   (dma_addr_t) (is_lbus_device(dev) ? \
+						virt_to_lbus(__addr) : \
+						__virt_to_bus(__addr)); })
 
 #endif	/* CONFIG_ARCH_OMAP15XX */
 
diff --git a/include/asm-arm/arch-omap/menelaus.h b/arch/arm/plat-omap/include/mach/menelaus.h
index 69ed7ee4017..3122bf68c7c 100644
--- a/include/asm-arm/arch-omap/menelaus.h
+++ b/arch/arm/plat-omap/include/mach/menelaus.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/menelaus.h
+ * arch/arm/plat-omap/include/mach/menelaus.h
  *
  * Functions to access Menelaus power management chip
  */
diff --git a/include/asm-arm/arch-omap/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 7cfc5f25856..fc15d13058f 100644
--- a/include/asm-arm/arch-omap/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -15,7 +15,7 @@
 #include <linux/device.h>
 #include <linux/mmc/host.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #define OMAP_MMC_MAX_SLOTS	2
 
diff --git a/include/asm-arm/arch-omap/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
index a73a28571fe..5cee7e16a1b 100644
--- a/include/asm-arm/arch-omap/mtd-xip.h
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -14,7 +14,7 @@
 #ifndef __ARCH_OMAP_MTD_XIP_H__
 #define __ARCH_OMAP_MTD_XIP_H__
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #define OMAP_MPU_TIMER_BASE	(0xfffec500)
 #define OMAP_MPU_TIMER_OFFSET	0x100
 
diff --git a/include/asm-arm/arch-omap/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index ff9a5b5575f..614b2c1327c 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/mux.h
+ * arch/arm/plat-omap/include/mach/mux.h
  *
  * Table of the Omap register configurations for the FUNC_MUX and
  * PULL_DWN combinations.
diff --git a/include/asm-arm/arch-omap/nand.h b/arch/arm/plat-omap/include/mach/nand.h
index 17ae26e3535..631a7bed1ee 100644
--- a/include/asm-arm/arch-omap/nand.h
+++ b/arch/arm/plat-omap/include/mach/nand.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-omap/nand.h
+ * arch/arm/plat-omap/include/mach/nand.h
  *
  * Copyright (C) 2006 Micron Technology Inc.
  *
diff --git a/include/asm-arm/arch-omap/omap-alsa.h b/arch/arm/plat-omap/include/mach/omap-alsa.h
index faa0ed23d4b..bdf30a0f87f 100644
--- a/include/asm-arm/arch-omap/omap-alsa.h
+++ b/arch/arm/plat-omap/include/mach/omap-alsa.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/omap-alsa.h
+ * arch/arm/plat-omap/include/mach/omap-alsa.h
  *
  * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
  *
@@ -40,10 +40,10 @@
 #ifndef __OMAP_ALSA_H
 #define __OMAP_ALSA_H
 
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/mcbsp.h>
 #include <linux/platform_device.h>
 
 #define DMA_BUF_SIZE	(1024 * 8)
diff --git a/include/asm-arm/arch-omap/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
index c575d354850..505a38af8b2 100644
--- a/include/asm-arm/arch-omap/omap1510.h
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-omap/omap1510.h
+/* arch/arm/plat-omap/include/mach/omap1510.h
  *
  * Hardware definitions for TI OMAP1510 processor.
  *
diff --git a/include/asm-arm/arch-omap/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index f7f5cdfdccc..c6c93afb278 100644
--- a/include/asm-arm/arch-omap/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-omap/omap16xx.h
+/* arch/arm/plat-omap/include/mach/omap16xx.h
  *
  * Hardware definitions for TI OMAP1610/5912/1710 processors.
  *
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index b9fcaae287c..bb8319d66e9 100644
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-omap/omap24xx.h
+ * arch/arm/plat-omap/include/mach/omap24xx.h
  *
  * This file contains the processor specific definitions
  * of the TI OMAP24XX.
diff --git a/include/asm-arm/arch-omap/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index aa30c6d10ab..8e0479fff05 100644
--- a/include/asm-arm/arch-omap/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-omap/omap34xx.h
+ * arch/arm/plat-omap/include/mach/omap34xx.h
  *
  * This file contains the processor specific definitions of the TI OMAP34XX.
  *
diff --git a/include/asm-arm/arch-omap/omap730.h b/arch/arm/plat-omap/include/mach/omap730.h
index 755b64c5e9f..14272bc1a6f 100644
--- a/include/asm-arm/arch-omap/omap730.h
+++ b/arch/arm/plat-omap/include/mach/omap730.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-omap/omap730.h
+/* arch/arm/plat-omap/include/mach/omap730.h
  *
  * Hardware definitions for TI OMAP730 processor.
  *
diff --git a/include/asm-arm/arch-omap/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index 46d7a4f6085..cae037d1307 100644
--- a/include/asm-arm/arch-omap/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -1,5 +1,5 @@
 /*
- * File: include/asm-arm/arch-omap/omapfb.h
+ * File: arch/arm/plat-omap/include/mach/omapfb.h
  *
  * Framebuffer driver for TI OMAP boards
  *
@@ -167,7 +167,7 @@ enum omapfb_update_mode {
 #include <linux/fb.h>
 #include <linux/mutex.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #define OMAP_LCDC_INV_VSYNC             0x0001
 #define OMAP_LCDC_INV_HSYNC             0x0002
diff --git a/include/asm-arm/arch-omap/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 6c959d0ce47..d57f20226b2 100644
--- a/include/asm-arm/arch-omap/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-omap/onenand.h
+ * arch/arm/plat-omap/include/mach/onenand.h
  *
  * Copyright (C) 2006 Nokia Corporation
  * Author: Juha Yrjola
diff --git a/include/asm-arm/arch-omap/param.h b/arch/arm/plat-omap/include/mach/param.h
index face9ad41e9..1eb4dc32697 100644
--- a/include/asm-arm/arch-omap/param.h
+++ b/arch/arm/plat-omap/include/mach/param.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/param.h
+ *  arch/arm/plat-omap/include/mach/param.h
  *
  */
 
diff --git a/include/asm-arm/arch-omap/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index 14588059981..bfa09325a5f 100644
--- a/include/asm-arm/arch-omap/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/pm.h
+ * arch/arm/plat-omap/include/mach/pm.h
  *
  * Header file for OMAP Power Management Routines
  *
diff --git a/include/asm-arm/arch-omap/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
index 7bcaf94bde9..56eba0fd6f6 100644
--- a/include/asm-arm/arch-omap/prcm.h
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/prcm.h
+ * arch/arm/plat-omap/include/mach/prcm.h
  *
  * Access definations for use in OMAP24XX clock and power management
  *
diff --git a/include/asm-arm/arch-omap/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 673b3965bef..787b7acec54 100644
--- a/include/asm-arm/arch-omap/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -14,7 +14,7 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
 
diff --git a/include/asm-arm/arch-omap/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 79a5297af9f..cc6bfa51ccb 100644
--- a/include/asm-arm/arch-omap/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/serial.h
+ *  arch/arm/plat-omap/include/mach/serial.h
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/include/asm-arm/arch-omap/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index be59f4a9828..e0932344998 100644
--- a/include/asm-arm/arch-omap/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/sram.h
+ * arch/arm/plat-omap/include/mach/sram.h
  *
  * Interface for functions that need to be run in internal SRAM
  *
diff --git a/include/asm-arm/arch-omap/system.h b/arch/arm/plat-omap/include/mach/system.h
index ac2bfa433f0..06a28c7b98d 100644
--- a/include/asm-arm/arch-omap/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -1,5 +1,5 @@
 /*
- * Copied from linux/include/asm-arm/arch-sa1100/system.h
+ * Copied from arch/arm/mach-sa1100/include/mach/system.h
  * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
  */
 #ifndef __ASM_ARCH_SYSTEM_H
@@ -7,7 +7,7 @@
 #include <linux/clk.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #ifndef CONFIG_MACH_VOICEBLUE
 #define voiceblue_reset()		do {} while (0)
diff --git a/include/asm-arm/arch-omap/tc.h b/arch/arm/plat-omap/include/mach/tc.h
index 65a9c82d3bf..d2fcd789bb9 100644
--- a/include/asm-arm/arch-omap/tc.h
+++ b/arch/arm/plat-omap/include/mach/tc.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/tc.h
+ * arch/arm/plat-omap/include/mach/tc.h
  *
  * OMAP Traffic Controller
  *
diff --git a/include/asm-arm/arch-omap/timex.h b/arch/arm/plat-omap/include/mach/timex.h
index 21f2e367185..6d35767bc48 100644
--- a/include/asm-arm/arch-omap/timex.h
+++ b/arch/arm/plat-omap/include/mach/timex.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/timex.h
+ * arch/arm/plat-omap/include/mach/timex.h
  *
  * Copyright (C) 2000 RidgeRun, Inc.
  * Author:  Greg Lonnon <glonnon@ridgerun.com>
diff --git a/include/asm-arm/arch-omap/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
index aca0adfef1b..0814c5f210c 100644
--- a/include/asm-arm/arch-omap/uncompress.h
+++ b/arch/arm/plat-omap/include/mach/uncompress.h
@@ -1,10 +1,10 @@
 /*
- * linux/include/asm-arm/arch-omap/uncompress.h
+ * arch/arm/plat-omap/include/mach/uncompress.h
  *
  * Serial port stubs for kernel decompress status messages
  *
  * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/include/asm-arm/arch-omap1510/uncompress.h
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
  * Copyright (C) 2000 RidgeRun, Inc.
  * Author: Greg Lonnon <glonnon@ridgerun.com>
  *
@@ -19,7 +19,7 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
-#include <asm/arch/serial.h>
+#include <mach/serial.h>
 
 unsigned int system_rev;
 
diff --git a/include/asm-arm/arch-omap/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index ddf1861e6df..a56a610950c 100644
--- a/include/asm-arm/arch-omap/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -3,7 +3,7 @@
 #ifndef	__ASM_ARCH_OMAP_USB_H
 #define	__ASM_ARCH_OMAP_USB_H
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/include/asm-arm/arch-omap/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index 5b8bd8dae8b..dc104cd9619 100644
--- a/include/asm-arm/arch-omap/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-omap/vmalloc.h
+ *  arch/arm/plat-omap/include/mach/vmalloc.h
  *
  *  Copyright (C) 2000 Russell King.
  *
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index ff1413eae0b..1d7aec1a691 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -31,7 +31,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/arch/mailbox.h>
+#include <mach/mailbox.h>
 #include "mailbox.h"
 
 static struct omap_mbox *mboxes;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index c7f74064696..014d26574bb 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
 
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
 
@@ -651,7 +651,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
 	omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
 				 src_port,
 				 OMAP_DMA_AMODE_CONSTANT,
-				 mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1,
+				 mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1,
 				 0, 0);
 
 	omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
@@ -712,7 +712,7 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
 	omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
 				src_port,
 				OMAP_DMA_AMODE_CONSTANT,
-				mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1,
+				mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1,
 				0, 0);
 
 	omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
@@ -830,6 +830,7 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp[id].dma_tx_lch = -1;
 	mcbsp[id].dma_rx_lch = -1;
 
+	mcbsp[id].phys_base = pdata->phys_base;
 	mcbsp[id].io_base = pdata->virt_base;
 	/* Default I/O is IRQ based */
 	mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 6f3f459731c..847df208c46 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
 #include <asm/system.h>
 #include <asm/io.h>
 #include <linux/spinlock.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index b5d307026c8..8bdbf979a25 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -33,7 +33,7 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 554ee58e129..ac67eeb6ca6 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/sram.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/board.h>
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 2699c16d4da..777485e0636 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -31,12 +31,12 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
 
 #ifdef CONFIG_ARCH_OMAP1
 
diff --git a/include/asm-arm/plat-orion/cache-feroceon-l2.h b/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
index ba4e016d3ec..06f982d5569 100644
--- a/include/asm-arm/plat-orion/cache-feroceon-l2.h
+++ b/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/plat-orion/cache-feroceon-l2.h
+ * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
  *
  * Copyright (C) 2008 Marvell Semiconductor
  *
diff --git a/include/asm-arm/plat-orion/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h
index 785705651e2..64343051095 100644
--- a/include/asm-arm/plat-orion/ehci-orion.h
+++ b/arch/arm/plat-orion/include/plat/ehci-orion.h
@@ -1,13 +1,13 @@
 /*
- * include/asm-arm/plat-orion/ehci-orion.h
+ * arch/arm/plat-orion/include/plat/ehci-orion.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_PLAT_ORION_EHCI_ORION_H
-#define __ASM_PLAT_ORION_EHCI_ORION_H
+#ifndef __PLAT_EHCI_ORION_H
+#define __PLAT_EHCI_ORION_H
 
 #include <linux/mbus.h>
 
diff --git a/include/asm-arm/plat-orion/irq.h b/arch/arm/plat-orion/include/plat/irq.h
index 94aeed919d5..f05eeab9496 100644
--- a/include/asm-arm/plat-orion/irq.h
+++ b/arch/arm/plat-orion/include/plat/irq.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/plat-orion/irq.h
+ * arch/arm/plat-orion/include/plat/irq.h
  *
  * Marvell Orion SoC IRQ handling.
  *
@@ -8,8 +8,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_PLAT_ORION_IRQ_H
-#define __ASM_PLAT_ORION_IRQ_H
+#ifndef __PLAT_IRQ_H
+#define __PLAT_IRQ_H
 
 void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
 
diff --git a/include/asm-arm/plat-orion/mv_xor.h b/arch/arm/plat-orion/include/plat/mv_xor.h
index c349e8ff5cc..bd5f3bdb4ae 100644
--- a/include/asm-arm/plat-orion/mv_xor.h
+++ b/arch/arm/plat-orion/include/plat/mv_xor.h
@@ -1,9 +1,11 @@
 /*
+ * arch/arm/plat-orion/include/plat/mv_xor.h
+ *
  * Marvell XOR platform device data definition file.
  */
 
-#ifndef __ASM_PLAT_ORION_MV_XOR_H
-#define __ASM_PLAT_ORION_MV_XOR_H
+#ifndef __PLAT_MV_XOR_H
+#define __PLAT_MV_XOR_H
 
 #include <linux/dmaengine.h>
 #include <linux/mbus.h>
diff --git a/include/asm-arm/plat-orion/orion_nand.h b/arch/arm/plat-orion/include/plat/orion_nand.h
index ad4ce94c199..d6a4cfa3778 100644
--- a/include/asm-arm/plat-orion/orion_nand.h
+++ b/arch/arm/plat-orion/include/plat/orion_nand.h
@@ -1,13 +1,13 @@
 /*
- * include/asm-arm/plat-orion/orion_nand.h
+ * arch/arm/plat-orion/include/plat/orion_nand.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_PLAT_ORION_ORION_NAND_H
-#define __ASM_PLAT_ORION_ORION_NAND_H
+#ifndef __PLAT_ORION_NAND_H
+#define __PLAT_ORION_NAND_H
 
 /*
  * Device bus NAND private data
diff --git a/include/asm-arm/plat-orion/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h
index e61b7bd97af..3ebfef72b4e 100644
--- a/include/asm-arm/plat-orion/pcie.h
+++ b/arch/arm/plat-orion/include/plat/pcie.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/plat-orion/pcie.h
+ * arch/arm/plat-orion/include/plat/pcie.h
  *
  * Marvell Orion SoC PCIe handling.
  *
@@ -8,8 +8,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_PLAT_ORION_PCIE_H
-#define __ASM_PLAT_ORION_PCIE_H
+#ifndef __PLAT_PCIE_H
+#define __PLAT_PCIE_H
 
 u32 orion_pcie_dev_id(void __iomem *base);
 u32 orion_pcie_rev(void __iomem *base);
diff --git a/include/asm-arm/plat-orion/time.h b/arch/arm/plat-orion/include/plat/time.h
index 0e85cc8f44d..c06ca35f361 100644
--- a/include/asm-arm/plat-orion/time.h
+++ b/arch/arm/plat-orion/include/plat/time.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/plat-orion/time.h
+ * arch/arm/plat-orion/include/plat/time.h
  *
  * Marvell Orion SoC time handling.
  *
@@ -8,8 +8,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_PLAT_ORION_TIME_H
-#define __ASM_PLAT_ORION_TIME_H
+#ifndef __PLAT_TIME_H
+#define __PLAT_TIME_H
 
 void orion_time_init(unsigned int irq, unsigned int tclk);
 
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index fe66a183516..3f9d34fc738 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
 
 static void orion_irq_mask(u32 irq)
 {
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index ca32c60e14d..883902fead8 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -12,7 +12,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 
 /*
  * PCIe unit register offsets.
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 93c4ef9f006..544d6b327f3 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -16,7 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Number of timer ticks per jiffy.
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 3ac8d8d781b..54d4b8e2263 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -40,12 +40,12 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 398c7ac2529..1863a1b1bc4 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -31,12 +31,12 @@
 #include <asm/mach/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c/nand.h>
 
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index f5699cadb0c..89ce60eabd5 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -30,7 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/delay.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/system-reset.h>
+#include <mach/system-reset.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
@@ -169,9 +169,7 @@ static struct map_desc s3c_iodesc[] __initdata = {
 	IODESC_ENT(UART)
 };
 
-
-static struct cpu_table *
-s3c_lookup_cpu(unsigned long idcode)
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode)
 {
 	struct cpu_table *tab;
 	int count;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index eea3b32ff79..d6fb76578b1 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -23,8 +23,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/fb.h>
-#include <asm/hardware.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 8c5e656d5d8..08c2aaf14c4 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -29,12 +29,12 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
 #include <asm/mach/dma.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index ee99dcc7f0b..dd27334e3d7 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -27,11 +27,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
 {
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 825d8d0c5ca..3caec6bad3e 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 struct s3c24xx_gpio_chip {
 	struct gpio_chip	chip;
@@ -39,7 +39,7 @@ static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
  * drivers themsevles.
  */
 
-int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	void __iomem *base = ourchip->base;
@@ -58,7 +58,7 @@ int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
-int s3c24xx_gpiolib_output(struct gpio_chip *chip,
+static int s3c24xx_gpiolib_output(struct gpio_chip *chip,
 				  unsigned offset, int value)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
@@ -86,7 +86,8 @@ int s3c24xx_gpiolib_output(struct gpio_chip *chip,
 	return 0;
 }
 
-void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
+static void s3c24xx_gpiolib_set(struct gpio_chip *chip,
+				unsigned offset, int value)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	void __iomem *base = ourchip->base;
@@ -104,7 +105,7 @@ void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
 	local_irq_restore(flags);
 }
 
-int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	unsigned long val;
@@ -150,8 +151,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
 	return 0;
 }
 
-
-struct s3c24xx_gpio_chip gpios[] = {
+static struct s3c24xx_gpio_chip gpios[] = {
 	[0] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
 		.chip	= {
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 001436c04b1..36cefe17683 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -56,14 +56,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index cb0b3a4ccf1..e6705014b2a 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -24,12 +24,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
 
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index bf5581a9aee..fc4b731a949 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -37,14 +37,14 @@
 #include <linux/serial_core.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-irq.h>
 
 #include <asm/mach/time.h>
 
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index 2cda3e3c678..306cc9c6f9e 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -18,11 +18,11 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
@@ -89,7 +89,7 @@ static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
 
 /* TODO - add set rate calls. */
 
-struct clk clk_timer_scaler[] = {
+static struct clk clk_timer_scaler[] = {
 	[0]	= {
 		.name		= "pwm-scaler0",
 		.id		= -1,
@@ -102,7 +102,7 @@ struct clk clk_timer_scaler[] = {
 	},
 };
 
-struct clk clk_timer_tclk[] = {
+static struct clk clk_timer_tclk[] = {
 	[0]	= {
 		.name		= "pwm-tclk0",
 		.id		= -1,
@@ -232,7 +232,7 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-struct pwm_tdiv_clk clk_timer_tdiv[] = {
+static struct pwm_tdiv_clk clk_timer_tdiv[] = {
 	[0]	= {
 		.clk	= {
 			.name		= "pwm-tdiv",
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 18c4bdc49a0..7a92c938542 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/pwm.h>
 
+#include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c/regs-timer.h>
 
 struct pwm_device {
@@ -38,7 +39,7 @@ struct pwm_device {
 	unsigned char		 pwm_id;
 };
 
-#define pwm_dbg(_pwm, msg...) dev_info(&(_pwm)->pdev->dev, msg)
+#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
 
 static struct clk *clk_scaler[2];
 
@@ -168,7 +169,7 @@ void pwm_disable(struct pwm_device *pwm)
 
 EXPORT_SYMBOL(pwm_disable);
 
-unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
 {
 	unsigned long tin_parent_rate;
 	unsigned int div;
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index faf3e0f9f4e..8a5fffde663 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 2dbb2606d44..f3dc38cf1de 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 2f01af5f64c..281b4804ed3 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -25,15 +25,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index a646cbe8244..4981a08b6eb 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -26,12 +26,12 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index 766473b3f98..b471a21ae2e 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -32,9 +32,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 #include <asm/plat-s3c/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 #include <asm/mach/time.h>
 
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index c2a4993a724..1dbaa29ac4d 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -6,4 +6,5 @@
 
 include/asm-arm/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
 	@echo '  Generating $@'
+	@mkdir -p $(dir $@)
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 8b8f564c3aa..56281c030a7 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sun Jul 13 12:04:05 2008
+# Last update: Wed Aug 13 21:56:02 2008
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -843,7 +843,7 @@ borzoi			MACH_BORZOI		BORZOI			831
 gecko			MACH_GECKO		GECKO			832
 ds101			MACH_DS101		DS101			833
 omap_palmtt2		MACH_OMAP_PALMTT2	OMAP_PALMTT2		834
-xscale_palmld		MACH_XSCALE_PALMLD	XSCALE_PALMLD		835
+palmld			MACH_PALMLD		PALMLD			835
 cc9c			MACH_CC9C		CC9C			836
 sbc1670			MACH_SBC1670		SBC1670			837
 ixdp28x5		MACH_IXDP28X5		IXDP28X5		838
@@ -852,7 +852,7 @@ ml696k			MACH_ML696K		ML696K			840
 arcom_zeus		MACH_ARCOM_ZEUS		ARCOM_ZEUS		841
 osiris			MACH_OSIRIS		OSIRIS			842
 maestro			MACH_MAESTRO		MAESTRO			843
-tunge2			MACH_TUNGE2		TUNGE2			844
+palmte2			MACH_PALMTE2		PALMTE2			844
 ixbbm			MACH_IXBBM		IXBBM			845
 mx27ads			MACH_MX27ADS		MX27ADS			846
 ax8004			MACH_AX8004		AX8004			847
@@ -916,7 +916,7 @@ nxdb500			MACH_NXDB500		NXDB500			905
 apf9328			MACH_APF9328		APF9328			906
 omap_wipoq		MACH_OMAP_WIPOQ		OMAP_WIPOQ		907
 omap_twip		MACH_OMAP_TWIP		OMAP_TWIP		908
-palmtreo650		MACH_PALMTREO650	PALMTREO650		909
+palmt650		MACH_PALMT650		PALMT650		909
 acumen			MACH_ACUMEN		ACUMEN			910
 xp100			MACH_XP100		XP100			911
 fs2410			MACH_FS2410		FS2410			912
@@ -1096,7 +1096,7 @@ atc6			MACH_ATC6		ATC6			1086
 multmdw			MACH_MULTMDW		MULTMDW			1087
 mba2440			MACH_MBA2440		MBA2440			1088
 ecsd			MACH_ECSD		ECSD			1089
-zire31			MACH_ZIRE31		ZIRE31			1090
+palmz31			MACH_PALMZ31		PALMZ31			1090
 fsg			MACH_FSG		FSG			1091
 razor101		MACH_RAZOR101		RAZOR101		1092
 opera_tdm		MACH_OPERA_TDM		OPERA_TDM		1093
@@ -1810,7 +1810,7 @@ kriss_sensor		MACH_KRISS_SENSOR	KRISS_SENSOR		1819
 pilz_pmi5		MACH_PILZ_PMI5		PILZ_PMI5		1820
 jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
-gprisc4			MACH_GPRISC4		GPRISC4			1823
+gprisc3			MACH_GPRISC4		GPRISC4			1823
 stamp9260		MACH_STAMP9260		STAMP9260		1824
 smdk6430		MACH_SMDK6430		SMDK6430		1825
 smdkc100		MACH_SMDKC100		SMDKC100		1826
@@ -1820,3 +1820,44 @@ deister_eyecam		MACH_DEISTER_EYECAM	DEISTER_EYECAM		1829
 at91sam9m10ek		MACH_AT91SAM9M10EK	AT91SAM9M10EK		1830
 linkstation_produo	MACH_LINKSTATION_PRODUO	LINKSTATION_PRODUO	1831
 hit_b0			MACH_HIT_B0		HIT_B0			1832
+adx_rmu			MACH_ADX_RMU		ADX_RMU			1833
+xg_cpe_main		MACH_XG_CPE_MAIN	XG_CPE_MAIN		1834
+edb9407a		MACH_EDB9407A		EDB9407A		1835
+dtb9608			MACH_DTB9608		DTB9608			1836
+em104v1			MACH_EM104V1		EM104V1			1837
+demo			MACH_DEMO		DEMO			1838
+logi9260		MACH_LOGI9260		LOGI9260		1839
+mx31_exm32		MACH_MX31_EXM32		MX31_EXM32		1840
+usb_a9g20		MACH_USB_A9G20		USB_A9G20		1841
+picproje2008		MACH_PICPROJE2008	PICPROJE2008		1842
+cs_e9315		MACH_CS_E9315		CS_E9315		1843
+qil_a9g20		MACH_QIL_A9G20		QIL_A9G20		1844
+sha_pon020		MACH_SHA_PON020		SHA_PON020		1845
+nad			MACH_NAD		NAD			1846
+sbc35_a9260		MACH_SBC35_A9260	SBC35_A9260		1847
+sbc35_a9g20		MACH_SBC35_A9G20	SBC35_A9G20		1848
+davinci_beginning	MACH_DAVINCI_BEGINNING	DAVINCI_BEGINNING	1849
+uwc			MACH_UWC		UWC			1850
+mxlads			MACH_MXLADS		MXLADS			1851
+htcnike			MACH_HTCNIKE		HTCNIKE			1852
+deister_pxa270		MACH_DEISTER_PXA270	DEISTER_PXA270		1853
+cme9210js		MACH_CME9210JS		CME9210JS		1854
+cc9p9360		MACH_CC9P9360		CC9P9360		1855
+mocha			MACH_MOCHA		MOCHA			1856
+wapd170ag		MACH_WAPD170AG		WAPD170AG		1857
+linkstation_mini	MACH_LINKSTATION_MINI	LINKSTATION_MINI	1858
+afeb9260		MACH_AFEB9260		AFEB9260		1859
+w90x900			MACH_W90X900		W90X900			1860
+w90x700			MACH_W90X700		W90X700			1861
+kt300ip			MACH_KT300IP		KT300IP			1862
+kt300ip_g20		MACH_KT300IP_G20	KT300IP_G20		1863
+srcm			MACH_SRCM		SRCM			1864
+wlnx_9260		MACH_WLNX_9260		WLNX_9260		1865
+openmoko_gta03		MACH_OPENMOKO_GTA03	OPENMOKO_GTA03		1866
+osprey2			MACH_OSPREY2		OSPREY2			1867
+kbio9260		MACH_KBIO9260		KBIO9260		1868
+ginza			MACH_GINZA		GINZA			1869
+a636n			MACH_A636N		A636N			1870
+imx27ipcam		MACH_IMX27IPCAM		IMX27IPCAM		1871
+nenoc			MACH_NEMOC		NEMOC			1872
+geneva			MACH_GENEVA		GENEVA			1873
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index 17a3529341d..c9e1f0b47fd 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -23,9 +23,14 @@ KBUILD_AFLAGS	+= $(cpuflags-y)
 
 CHECKFLAGS	+= -D__avr32__ -D__BIG_ENDIAN
 
+machine-$(CONFIG_PLATFORM_AT32AP) := at32ap
+machdirs	:= $(patsubst %,arch/avr32/mach-%/, $(machine-y))
+
+KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
+
 head-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/head.o
 head-y					+= arch/avr32/kernel/head.o
-core-$(CONFIG_PLATFORM_AT32AP)		+= arch/avr32/mach-at32ap/
+core-y					+= $(machdirs)
 core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
 core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
@@ -34,20 +39,6 @@ core-y					+= arch/avr32/mm/
 drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
 libs-y					+= arch/avr32/lib/
 
-archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
-
-include/asm-avr32/.arch: $(wildcard include/config/platform/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-avr32/arch -> include/asm-avr32/$(archincdir-y)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-avr32
-	$(Q)ln -fsn $(srctree)/include/asm-avr32/$(archincdir-y) include/asm-avr32/arch
-else
-	$(Q)ln -fsn $(archincdir-y) include/asm-avr32/arch
-endif
-	@touch $@
-
-archprepare: include/asm-avr32/.arch
-
 CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
 
 BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
index b07ae63aa54..55ccc9ce489 100644
--- a/arch/avr32/boards/atngw100/flash.c
+++ b/arch/avr32/boards/atngw100/flash.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index c7fe94d03a1..b8286f1ce85 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -23,10 +23,10 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {
@@ -47,7 +47,7 @@ static struct eth_platform_data __initdata eth_data[2];
 static struct spi_board_info spi0_board_info[] __initdata = {
 	{
 		.modalias	= "mtd_dataflash",
-		.max_speed_hz	= 10000000,
+		.max_speed_hz	= 8000000,
 		.chip_select	= 0,
 	},
 };
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 8538ba75ef9..dfc3443e23a 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -23,10 +23,10 @@
 #include <asm/setup.h>
 #include <asm/atmel-mci.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -49,7 +49,7 @@ unsigned long at32_board_osc_rates[3] = {
  */
 #ifdef CONFIG_BOARD_ATSTK1006
 #include <linux/mtd/partitions.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing nand_timing __initdata = {
 	.ncs_read_setup		= 0,
@@ -96,7 +96,7 @@ static struct mtd_partition *nand_part_info(int size, int *num_partitions)
 	return nand_partitions;
 }
 
-struct atmel_nand_data atstk1006_nand_data __initdata = {
+static struct atmel_nand_data atstk1006_nand_data __initdata = {
 	.cle		= 21,
 	.ale		= 22,
 	.rdy_pin	= GPIO_PIN_PB(30),
@@ -325,7 +325,7 @@ static int __init atstk1002_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_mci(0, MCI_PDATA);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index 591fc73b554..0cf664174c1 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -20,10 +20,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index d9c5e0a2125..50a5273e591 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -22,10 +22,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
index 3d0a102ad45..6e4d561977f 100644
--- a/arch/avr32/boards/atstk1000/flash.c
+++ b/arch/avr32/boards/atstk1000/flash.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 8bedf93876a..2d6b560115d 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -18,9 +18,9 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
diff --git a/arch/avr32/boot/images/.gitignore b/arch/avr32/boot/images/.gitignore
new file mode 100644
index 00000000000..64ea9d0141d
--- /dev/null
+++ b/arch/avr32/boot/images/.gitignore
@@ -0,0 +1,4 @@
+uImage
+uImage.srec
+vmlinux.cso
+sfdwarf.log
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 119edb839ac..541520912c5 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:30:59 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 16:00:47 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -78,10 +78,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -98,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,6 +149,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -160,6 +168,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -174,6 +183,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -205,10 +220,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -222,6 +233,7 @@ CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -339,8 +351,10 @@ CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -499,7 +513,6 @@ CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -607,21 +620,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -646,27 +673,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -685,6 +717,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -716,10 +749,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -740,7 +769,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -759,21 +788,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -783,6 +815,7 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -821,10 +854,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -844,6 +880,19 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
 # CONFIG_UIO is not set
 
 #
@@ -921,6 +970,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -931,17 +981,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1017,6 +1066,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1037,6 +1088,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1101,6 +1153,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1141,12 +1197,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index c6d02eac879..69fce6b6a78 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:30:20 2008
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 16:02:27 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -77,10 +77,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -91,12 +97,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -130,6 +137,7 @@ CONFIG_BOARD_ATSTK1000=y
 CONFIG_BOARD_ATSTK1002=y
 # CONFIG_BOARD_ATSTK1003 is not set
 # CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -150,6 +158,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -168,6 +177,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -182,6 +192,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -213,10 +229,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -230,6 +242,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -284,6 +297,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -474,6 +488,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -483,7 +498,6 @@ CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -625,21 +639,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -664,27 +692,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -703,6 +736,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -754,6 +788,9 @@ CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
@@ -761,15 +798,7 @@ CONFIG_LCD_LTV350QV=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -783,37 +812,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# SPI devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -836,7 +839,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -855,21 +858,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -879,7 +885,9 @@ CONFIG_LEDS_CLASS=m
 # LED drivers
 #
 CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -918,10 +926,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -941,18 +952,31 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
 # CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
+CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1018,6 +1042,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1028,13 +1053,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1104,6 +1128,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1124,6 +1150,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1188,6 +1215,10 @@ CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1228,12 +1259,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 5a4ae6b5d28..5477ed3183b 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:33:05 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:34:44 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -80,10 +80,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -93,12 +99,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -132,6 +139,7 @@ CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATSTK1002 is not set
 CONFIG_BOARD_ATSTK1003=y
 # CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -152,6 +160,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -170,6 +179,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -184,6 +194,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -215,10 +231,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -449,6 +461,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -458,7 +471,6 @@ CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -575,21 +587,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -614,27 +640,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -653,6 +684,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -684,15 +716,7 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -706,37 +730,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# SPI devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -759,7 +757,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -778,21 +776,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
-# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -802,7 +803,9 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -841,10 +844,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -864,8 +870,20 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-CONFIG_UIO=m
-# CONFIG_UIO_SMX is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -943,6 +961,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1011,6 +1030,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1029,6 +1050,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1056,6 +1078,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
@@ -1063,6 +1086,7 @@ CONFIG_CRC7=m
 CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index a0912fb7c92..69e6c0d08ce 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:34:57 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:38:56 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -69,10 +69,16 @@ CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 # CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -97,6 +103,7 @@ CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATSTK1002 is not set
 # CONFIG_BOARD_ATSTK1003 is not set
 CONFIG_BOARD_ATSTK1004=y
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -115,6 +122,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -133,6 +141,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 # CONFIG_NMI_DEBUGGING is not set
@@ -147,6 +156,8 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -164,10 +175,6 @@ CONFIG_CMDLINE=""
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -390,24 +397,28 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# I2C GPIO expanders:
 #
 
 #
-# I2C GPIO expanders:
+# PCI GPIO expanders:
 #
 
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -426,6 +437,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -477,6 +489,9 @@ CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
@@ -484,10 +499,6 @@ CONFIG_LCD_LTV350QV=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -507,7 +518,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -525,6 +536,7 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -547,6 +559,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -566,6 +580,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -620,6 +635,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -638,12 +654,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
new file mode 100644
index 00000000000..8b6e54c9946
--- /dev/null
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -0,0 +1,1304 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:40:26 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+CONFIG_BOARD_ATSTK1000=y
+# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_ATSTK1002 is not set
+# CONFIG_BOARD_ATSTK1003 is not set
+# CONFIG_BOARD_ATSTK1004 is not set
+CONFIG_BOARD_ATSTK1006=y
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_AT32=m
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_AT73C213=m
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/include/asm-avr32/Kbuild b/arch/avr32/include/asm/Kbuild
index 3136628ba8d..3136628ba8d 100644
--- a/include/asm-avr32/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
diff --git a/include/asm-avr32/a.out.h b/arch/avr32/include/asm/a.out.h
index e46375a34a7..e46375a34a7 100644
--- a/include/asm-avr32/a.out.h
+++ b/arch/avr32/include/asm/a.out.h
diff --git a/include/asm-avr32/addrspace.h b/arch/avr32/include/asm/addrspace.h
index 366794858ec..366794858ec 100644
--- a/include/asm-avr32/addrspace.h
+++ b/arch/avr32/include/asm/addrspace.h
diff --git a/include/asm-avr32/asm.h b/arch/avr32/include/asm/asm.h
index a2c64f404b9..a2c64f404b9 100644
--- a/include/asm-avr32/asm.h
+++ b/arch/avr32/include/asm/asm.h
diff --git a/include/asm-avr32/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h
index c2ea6e1c9aa..c2ea6e1c9aa 100644
--- a/include/asm-avr32/atmel-mci.h
+++ b/arch/avr32/include/asm/atmel-mci.h
diff --git a/include/asm-avr32/atomic.h b/arch/avr32/include/asm/atomic.h
index 7ef3862a73d..7ef3862a73d 100644
--- a/include/asm-avr32/atomic.h
+++ b/arch/avr32/include/asm/atomic.h
diff --git a/include/asm-avr32/auxvec.h b/arch/avr32/include/asm/auxvec.h
index d5dd435bf8f..d5dd435bf8f 100644
--- a/include/asm-avr32/auxvec.h
+++ b/arch/avr32/include/asm/auxvec.h
diff --git a/include/asm-avr32/bitops.h b/arch/avr32/include/asm/bitops.h
index 1a50b69b1a1..1a50b69b1a1 100644
--- a/include/asm-avr32/bitops.h
+++ b/arch/avr32/include/asm/bitops.h
diff --git a/include/asm-avr32/bug.h b/arch/avr32/include/asm/bug.h
index 331d45bab18..331d45bab18 100644
--- a/include/asm-avr32/bug.h
+++ b/arch/avr32/include/asm/bug.h
diff --git a/include/asm-avr32/bugs.h b/arch/avr32/include/asm/bugs.h
index 7635e770622..7635e770622 100644
--- a/include/asm-avr32/bugs.h
+++ b/arch/avr32/include/asm/bugs.h
diff --git a/include/asm-avr32/byteorder.h b/arch/avr32/include/asm/byteorder.h
index d77b48ba733..d77b48ba733 100644
--- a/include/asm-avr32/byteorder.h
+++ b/arch/avr32/include/asm/byteorder.h
diff --git a/include/asm-avr32/cache.h b/arch/avr32/include/asm/cache.h
index d3cf35ab11a..d3cf35ab11a 100644
--- a/include/asm-avr32/cache.h
+++ b/arch/avr32/include/asm/cache.h
diff --git a/include/asm-avr32/cachectl.h b/arch/avr32/include/asm/cachectl.h
index 4faf1ce6006..4faf1ce6006 100644
--- a/include/asm-avr32/cachectl.h
+++ b/arch/avr32/include/asm/cachectl.h
diff --git a/include/asm-avr32/cacheflush.h b/arch/avr32/include/asm/cacheflush.h
index 670674749b2..670674749b2 100644
--- a/include/asm-avr32/cacheflush.h
+++ b/arch/avr32/include/asm/cacheflush.h
diff --git a/include/asm-avr32/checksum.h b/arch/avr32/include/asm/checksum.h
index 4ddbfd2486a..4ddbfd2486a 100644
--- a/include/asm-avr32/checksum.h
+++ b/arch/avr32/include/asm/checksum.h
diff --git a/include/asm-avr32/cputime.h b/arch/avr32/include/asm/cputime.h
index e87e0f81cbe..e87e0f81cbe 100644
--- a/include/asm-avr32/cputime.h
+++ b/arch/avr32/include/asm/cputime.h
diff --git a/include/asm-avr32/current.h b/arch/avr32/include/asm/current.h
index c7b0549eab8..c7b0549eab8 100644
--- a/include/asm-avr32/current.h
+++ b/arch/avr32/include/asm/current.h
diff --git a/include/asm-avr32/delay.h b/arch/avr32/include/asm/delay.h
index a0ed9a9839a..a0ed9a9839a 100644
--- a/include/asm-avr32/delay.h
+++ b/arch/avr32/include/asm/delay.h
diff --git a/include/asm-avr32/device.h b/arch/avr32/include/asm/device.h
index d8f9872b0e2..d8f9872b0e2 100644
--- a/include/asm-avr32/device.h
+++ b/arch/avr32/include/asm/device.h
diff --git a/include/asm-avr32/div64.h b/arch/avr32/include/asm/div64.h
index d7ddd4fdeca..d7ddd4fdeca 100644
--- a/include/asm-avr32/div64.h
+++ b/arch/avr32/include/asm/div64.h
diff --git a/include/asm-avr32/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h
index 0399359ab5d..0399359ab5d 100644
--- a/include/asm-avr32/dma-mapping.h
+++ b/arch/avr32/include/asm/dma-mapping.h
diff --git a/include/asm-avr32/dma.h b/arch/avr32/include/asm/dma.h
index 9e91205590a..9e91205590a 100644
--- a/include/asm-avr32/dma.h
+++ b/arch/avr32/include/asm/dma.h
diff --git a/include/asm-avr32/elf.h b/arch/avr32/include/asm/elf.h
index 64ce40ee1d5..64ce40ee1d5 100644
--- a/include/asm-avr32/elf.h
+++ b/arch/avr32/include/asm/elf.h
diff --git a/include/asm-avr32/emergency-restart.h b/arch/avr32/include/asm/emergency-restart.h
index 3e7e014776b..3e7e014776b 100644
--- a/include/asm-avr32/emergency-restart.h
+++ b/arch/avr32/include/asm/emergency-restart.h
diff --git a/include/asm-avr32/errno.h b/arch/avr32/include/asm/errno.h
index 558a7249f06..558a7249f06 100644
--- a/include/asm-avr32/errno.h
+++ b/arch/avr32/include/asm/errno.h
diff --git a/include/asm-avr32/fb.h b/arch/avr32/include/asm/fb.h
index 41baf84ad40..41baf84ad40 100644
--- a/include/asm-avr32/fb.h
+++ b/arch/avr32/include/asm/fb.h
diff --git a/include/asm-avr32/fcntl.h b/arch/avr32/include/asm/fcntl.h
index 14c0c4402b1..14c0c4402b1 100644
--- a/include/asm-avr32/fcntl.h
+++ b/arch/avr32/include/asm/fcntl.h
diff --git a/include/asm-avr32/futex.h b/arch/avr32/include/asm/futex.h
index 10419f14a68..10419f14a68 100644
--- a/include/asm-avr32/futex.h
+++ b/arch/avr32/include/asm/futex.h
diff --git a/include/asm-avr32/gpio.h b/arch/avr32/include/asm/gpio.h
index 19e8ccc77db..b771f710596 100644
--- a/include/asm-avr32/gpio.h
+++ b/arch/avr32/include/asm/gpio.h
@@ -1,6 +1,6 @@
 #ifndef __ASM_AVR32_GPIO_H
 #define __ASM_AVR32_GPIO_H
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #endif /* __ASM_AVR32_GPIO_H */
diff --git a/include/asm-avr32/hardirq.h b/arch/avr32/include/asm/hardirq.h
index 267354356f6..267354356f6 100644
--- a/include/asm-avr32/hardirq.h
+++ b/arch/avr32/include/asm/hardirq.h
diff --git a/include/asm-avr32/hw_irq.h b/arch/avr32/include/asm/hw_irq.h
index 218b0a6bfd1..218b0a6bfd1 100644
--- a/include/asm-avr32/hw_irq.h
+++ b/arch/avr32/include/asm/hw_irq.h
diff --git a/include/asm-avr32/io.h b/arch/avr32/include/asm/io.h
index 8be7ea9c904..a520f77ead9 100644
--- a/include/asm-avr32/io.h
+++ b/arch/avr32/include/asm/io.h
@@ -8,7 +8,7 @@
 #include <asm/addrspace.h>
 #include <asm/byteorder.h>
 
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 /* virt_to_phys will only work when address is in P1 or P2 */
 static __inline__ unsigned long virt_to_phys(volatile void *address)
diff --git a/include/asm-avr32/ioctl.h b/arch/avr32/include/asm/ioctl.h
index c8472c1398e..c8472c1398e 100644
--- a/include/asm-avr32/ioctl.h
+++ b/arch/avr32/include/asm/ioctl.h
diff --git a/include/asm-avr32/ioctls.h b/arch/avr32/include/asm/ioctls.h
index 0cf2c0a4502..0cf2c0a4502 100644
--- a/include/asm-avr32/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
diff --git a/include/asm-avr32/ipcbuf.h b/arch/avr32/include/asm/ipcbuf.h
index 1552c9698f5..1552c9698f5 100644
--- a/include/asm-avr32/ipcbuf.h
+++ b/arch/avr32/include/asm/ipcbuf.h
diff --git a/include/asm-avr32/irq.h b/arch/avr32/include/asm/irq.h
index c563b7720c1..6fa8913f854 100644
--- a/include/asm-avr32/irq.h
+++ b/arch/avr32/include/asm/irq.h
@@ -3,7 +3,7 @@
 
 #define NR_INTERNAL_IRQS	64
 
-#include <asm/arch/irq.h>
+#include <mach/irq.h>
 
 #ifndef NR_IRQS
 #define NR_IRQS			(NR_INTERNAL_IRQS)
diff --git a/include/asm-avr32/irq_regs.h b/arch/avr32/include/asm/irq_regs.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-avr32/irq_regs.h
+++ b/arch/avr32/include/asm/irq_regs.h
diff --git a/include/asm-avr32/irqflags.h b/arch/avr32/include/asm/irqflags.h
index 93570daac38..93570daac38 100644
--- a/include/asm-avr32/irqflags.h
+++ b/arch/avr32/include/asm/irqflags.h
diff --git a/include/asm-avr32/kdebug.h b/arch/avr32/include/asm/kdebug.h
index ca4f9542365..ca4f9542365 100644
--- a/include/asm-avr32/kdebug.h
+++ b/arch/avr32/include/asm/kdebug.h
diff --git a/include/asm-avr32/kmap_types.h b/arch/avr32/include/asm/kmap_types.h
index b7f5c687010..b7f5c687010 100644
--- a/include/asm-avr32/kmap_types.h
+++ b/arch/avr32/include/asm/kmap_types.h
diff --git a/include/asm-avr32/kprobes.h b/arch/avr32/include/asm/kprobes.h
index 996cb656474..996cb656474 100644
--- a/include/asm-avr32/kprobes.h
+++ b/arch/avr32/include/asm/kprobes.h
diff --git a/include/asm-avr32/linkage.h b/arch/avr32/include/asm/linkage.h
index f7b285e910d..f7b285e910d 100644
--- a/include/asm-avr32/linkage.h
+++ b/arch/avr32/include/asm/linkage.h
diff --git a/include/asm-avr32/local.h b/arch/avr32/include/asm/local.h
index 1c1619694da..1c1619694da 100644
--- a/include/asm-avr32/local.h
+++ b/arch/avr32/include/asm/local.h
diff --git a/include/asm-arm/mach/serial_at91.h b/arch/avr32/include/asm/mach/serial_at91.h
index 55b317a8906..55b317a8906 100644
--- a/include/asm-arm/mach/serial_at91.h
+++ b/arch/avr32/include/asm/mach/serial_at91.h
diff --git a/include/asm-avr32/mman.h b/arch/avr32/include/asm/mman.h
index 648f91e7187..648f91e7187 100644
--- a/include/asm-avr32/mman.h
+++ b/arch/avr32/include/asm/mman.h
diff --git a/include/asm-avr32/mmu.h b/arch/avr32/include/asm/mmu.h
index 60c2d2650d3..60c2d2650d3 100644
--- a/include/asm-avr32/mmu.h
+++ b/arch/avr32/include/asm/mmu.h
diff --git a/include/asm-avr32/mmu_context.h b/arch/avr32/include/asm/mmu_context.h
index 27ff2340710..27ff2340710 100644
--- a/include/asm-avr32/mmu_context.h
+++ b/arch/avr32/include/asm/mmu_context.h
diff --git a/include/asm-avr32/module.h b/arch/avr32/include/asm/module.h
index 451444538a1..451444538a1 100644
--- a/include/asm-avr32/module.h
+++ b/arch/avr32/include/asm/module.h
diff --git a/include/asm-avr32/msgbuf.h b/arch/avr32/include/asm/msgbuf.h
index ac18bc4da7f..ac18bc4da7f 100644
--- a/include/asm-avr32/msgbuf.h
+++ b/arch/avr32/include/asm/msgbuf.h
diff --git a/include/asm-avr32/mutex.h b/arch/avr32/include/asm/mutex.h
index 458c1f7fbc1..458c1f7fbc1 100644
--- a/include/asm-avr32/mutex.h
+++ b/arch/avr32/include/asm/mutex.h
diff --git a/include/asm-avr32/numnodes.h b/arch/avr32/include/asm/numnodes.h
index 0b864d7ce33..0b864d7ce33 100644
--- a/include/asm-avr32/numnodes.h
+++ b/arch/avr32/include/asm/numnodes.h
diff --git a/include/asm-avr32/ocd.h b/arch/avr32/include/asm/ocd.h
index 6bef0949023..6bef0949023 100644
--- a/include/asm-avr32/ocd.h
+++ b/arch/avr32/include/asm/ocd.h
diff --git a/include/asm-avr32/page.h b/arch/avr32/include/asm/page.h
index f805d1cb11b..f805d1cb11b 100644
--- a/include/asm-avr32/page.h
+++ b/arch/avr32/include/asm/page.h
diff --git a/include/asm-avr32/param.h b/arch/avr32/include/asm/param.h
index 34bc8d4c3b2..34bc8d4c3b2 100644
--- a/include/asm-avr32/param.h
+++ b/arch/avr32/include/asm/param.h
diff --git a/include/asm-avr32/pci.h b/arch/avr32/include/asm/pci.h
index a32a0237201..a32a0237201 100644
--- a/include/asm-avr32/pci.h
+++ b/arch/avr32/include/asm/pci.h
diff --git a/include/asm-avr32/percpu.h b/arch/avr32/include/asm/percpu.h
index 69227b4cd0d..69227b4cd0d 100644
--- a/include/asm-avr32/percpu.h
+++ b/arch/avr32/include/asm/percpu.h
diff --git a/include/asm-avr32/pgalloc.h b/arch/avr32/include/asm/pgalloc.h
index 64082132394..64082132394 100644
--- a/include/asm-avr32/pgalloc.h
+++ b/arch/avr32/include/asm/pgalloc.h
diff --git a/include/asm-avr32/pgtable-2level.h b/arch/avr32/include/asm/pgtable-2level.h
index 425dd567b5b..425dd567b5b 100644
--- a/include/asm-avr32/pgtable-2level.h
+++ b/arch/avr32/include/asm/pgtable-2level.h
diff --git a/include/asm-avr32/pgtable.h b/arch/avr32/include/asm/pgtable.h
index fecdda16f44..fecdda16f44 100644
--- a/include/asm-avr32/pgtable.h
+++ b/arch/avr32/include/asm/pgtable.h
diff --git a/include/asm-avr32/poll.h b/arch/avr32/include/asm/poll.h
index c98509d3149..c98509d3149 100644
--- a/include/asm-avr32/poll.h
+++ b/arch/avr32/include/asm/poll.h
diff --git a/include/asm-avr32/posix_types.h b/arch/avr32/include/asm/posix_types.h
index fe0c0c01438..fe0c0c01438 100644
--- a/include/asm-avr32/posix_types.h
+++ b/arch/avr32/include/asm/posix_types.h
diff --git a/include/asm-avr32/processor.h b/arch/avr32/include/asm/processor.h
index 49a88f5a9d2..49a88f5a9d2 100644
--- a/include/asm-avr32/processor.h
+++ b/arch/avr32/include/asm/processor.h
diff --git a/include/asm-avr32/ptrace.h b/arch/avr32/include/asm/ptrace.h
index 9e2d44f4e0f..9e2d44f4e0f 100644
--- a/include/asm-avr32/ptrace.h
+++ b/arch/avr32/include/asm/ptrace.h
diff --git a/include/asm-avr32/resource.h b/arch/avr32/include/asm/resource.h
index c6dd101472b..c6dd101472b 100644
--- a/include/asm-avr32/resource.h
+++ b/arch/avr32/include/asm/resource.h
diff --git a/include/asm-avr32/scatterlist.h b/arch/avr32/include/asm/scatterlist.h
index 377320e3bd1..377320e3bd1 100644
--- a/include/asm-avr32/scatterlist.h
+++ b/arch/avr32/include/asm/scatterlist.h
diff --git a/include/asm-avr32/sections.h b/arch/avr32/include/asm/sections.h
index aa14252e418..aa14252e418 100644
--- a/include/asm-avr32/sections.h
+++ b/arch/avr32/include/asm/sections.h
diff --git a/include/asm-avr32/sembuf.h b/arch/avr32/include/asm/sembuf.h
index e472216e0c9..e472216e0c9 100644
--- a/include/asm-avr32/sembuf.h
+++ b/arch/avr32/include/asm/sembuf.h
diff --git a/include/asm-avr32/serial.h b/arch/avr32/include/asm/serial.h
index 5ecaebc22b0..5ecaebc22b0 100644
--- a/include/asm-avr32/serial.h
+++ b/arch/avr32/include/asm/serial.h
diff --git a/include/asm-avr32/setup.h b/arch/avr32/include/asm/setup.h
index ff5b7cf6be4..ff5b7cf6be4 100644
--- a/include/asm-avr32/setup.h
+++ b/arch/avr32/include/asm/setup.h
diff --git a/include/asm-avr32/shmbuf.h b/arch/avr32/include/asm/shmbuf.h
index c62fba41739..c62fba41739 100644
--- a/include/asm-avr32/shmbuf.h
+++ b/arch/avr32/include/asm/shmbuf.h
diff --git a/include/asm-avr32/shmparam.h b/arch/avr32/include/asm/shmparam.h
index 3681266c77f..3681266c77f 100644
--- a/include/asm-avr32/shmparam.h
+++ b/arch/avr32/include/asm/shmparam.h
diff --git a/include/asm-avr32/sigcontext.h b/arch/avr32/include/asm/sigcontext.h
index e04062b5f39..e04062b5f39 100644
--- a/include/asm-avr32/sigcontext.h
+++ b/arch/avr32/include/asm/sigcontext.h
diff --git a/include/asm-avr32/siginfo.h b/arch/avr32/include/asm/siginfo.h
index 5ee93f40a8a..5ee93f40a8a 100644
--- a/include/asm-avr32/siginfo.h
+++ b/arch/avr32/include/asm/siginfo.h
diff --git a/include/asm-avr32/signal.h b/arch/avr32/include/asm/signal.h
index caffefeeba1..caffefeeba1 100644
--- a/include/asm-avr32/signal.h
+++ b/arch/avr32/include/asm/signal.h
diff --git a/include/asm-avr32/socket.h b/arch/avr32/include/asm/socket.h
index 35863f26092..35863f26092 100644
--- a/include/asm-avr32/socket.h
+++ b/arch/avr32/include/asm/socket.h
diff --git a/include/asm-avr32/sockios.h b/arch/avr32/include/asm/sockios.h
index 0802d742f97..0802d742f97 100644
--- a/include/asm-avr32/sockios.h
+++ b/arch/avr32/include/asm/sockios.h
diff --git a/include/asm-avr32/stat.h b/arch/avr32/include/asm/stat.h
index e72881e1023..e72881e1023 100644
--- a/include/asm-avr32/stat.h
+++ b/arch/avr32/include/asm/stat.h
diff --git a/include/asm-avr32/statfs.h b/arch/avr32/include/asm/statfs.h
index 2961bd18c50..2961bd18c50 100644
--- a/include/asm-avr32/statfs.h
+++ b/arch/avr32/include/asm/statfs.h
diff --git a/include/asm-avr32/string.h b/arch/avr32/include/asm/string.h
index c91a623cd58..c91a623cd58 100644
--- a/include/asm-avr32/string.h
+++ b/arch/avr32/include/asm/string.h
diff --git a/include/asm-avr32/sysreg.h b/arch/avr32/include/asm/sysreg.h
index d4e0950170c..d4e0950170c 100644
--- a/include/asm-avr32/sysreg.h
+++ b/arch/avr32/include/asm/sysreg.h
diff --git a/include/asm-avr32/system.h b/arch/avr32/include/asm/system.h
index 9702c2213e1..9702c2213e1 100644
--- a/include/asm-avr32/system.h
+++ b/arch/avr32/include/asm/system.h
diff --git a/include/asm-avr32/termbits.h b/arch/avr32/include/asm/termbits.h
index db2daab31fd..db2daab31fd 100644
--- a/include/asm-avr32/termbits.h
+++ b/arch/avr32/include/asm/termbits.h
diff --git a/include/asm-avr32/termios.h b/arch/avr32/include/asm/termios.h
index 0152aba3515..0152aba3515 100644
--- a/include/asm-avr32/termios.h
+++ b/arch/avr32/include/asm/termios.h
diff --git a/include/asm-avr32/thread_info.h b/arch/avr32/include/asm/thread_info.h
index 294b25f9323..294b25f9323 100644
--- a/include/asm-avr32/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
diff --git a/include/asm-avr32/timex.h b/arch/avr32/include/asm/timex.h
index 187dcf38b21..187dcf38b21 100644
--- a/include/asm-avr32/timex.h
+++ b/arch/avr32/include/asm/timex.h
diff --git a/include/asm-avr32/tlb.h b/arch/avr32/include/asm/tlb.h
index 5c55f9ce7c7..5c55f9ce7c7 100644
--- a/include/asm-avr32/tlb.h
+++ b/arch/avr32/include/asm/tlb.h
diff --git a/include/asm-avr32/tlbflush.h b/arch/avr32/include/asm/tlbflush.h
index bf90a786f6b..bf90a786f6b 100644
--- a/include/asm-avr32/tlbflush.h
+++ b/arch/avr32/include/asm/tlbflush.h
diff --git a/include/asm-avr32/topology.h b/arch/avr32/include/asm/topology.h
index 5b766cbb480..5b766cbb480 100644
--- a/include/asm-avr32/topology.h
+++ b/arch/avr32/include/asm/topology.h
diff --git a/include/asm-avr32/traps.h b/arch/avr32/include/asm/traps.h
index 6a8fb944f41..6a8fb944f41 100644
--- a/include/asm-avr32/traps.h
+++ b/arch/avr32/include/asm/traps.h
diff --git a/include/asm-avr32/types.h b/arch/avr32/include/asm/types.h
index 9cefda6f534..9cefda6f534 100644
--- a/include/asm-avr32/types.h
+++ b/arch/avr32/include/asm/types.h
diff --git a/include/asm-avr32/uaccess.h b/arch/avr32/include/asm/uaccess.h
index ed092395215..ed092395215 100644
--- a/include/asm-avr32/uaccess.h
+++ b/arch/avr32/include/asm/uaccess.h
diff --git a/include/asm-avr32/ucontext.h b/arch/avr32/include/asm/ucontext.h
index ac7259c2a79..ac7259c2a79 100644
--- a/include/asm-avr32/ucontext.h
+++ b/arch/avr32/include/asm/ucontext.h
diff --git a/include/asm-avr32/unaligned.h b/arch/avr32/include/asm/unaligned.h
index 04187729047..04187729047 100644
--- a/include/asm-avr32/unaligned.h
+++ b/arch/avr32/include/asm/unaligned.h
diff --git a/include/asm-avr32/unistd.h b/arch/avr32/include/asm/unistd.h
index 89861a27543..89861a27543 100644
--- a/include/asm-avr32/unistd.h
+++ b/arch/avr32/include/asm/unistd.h
diff --git a/include/asm-avr32/user.h b/arch/avr32/include/asm/user.h
index 7e9152f81f5..7e9152f81f5 100644
--- a/include/asm-avr32/user.h
+++ b/arch/avr32/include/asm/user.h
diff --git a/include/asm-avr32/xor.h b/arch/avr32/include/asm/xor.h
index 99c87aa0af4..99c87aa0af4 100644
--- a/include/asm-avr32/xor.h
+++ b/arch/avr32/include/asm/xor.h
diff --git a/arch/avr32/kernel/.gitignore b/arch/avr32/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/avr32/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/avr32/kernel/asm-offsets.c b/arch/avr32/kernel/asm-offsets.c
index e4796c67a83..d6a8193a1d2 100644
--- a/arch/avr32/kernel/asm-offsets.c
+++ b/arch/avr32/kernel/asm-offsets.c
@@ -4,6 +4,8 @@
  * to extract and format the required data.
  */
 
+#include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/thread_info.h>
 #include <linux/kbuild.h>
 
@@ -17,4 +19,8 @@ void foo(void)
 	OFFSET(TI_rar_saved, thread_info, rar_saved);
 	OFFSET(TI_rsr_saved, thread_info, rsr_saved);
 	OFFSET(TI_restart_block, thread_info, restart_block);
+	BLANK();
+	OFFSET(TSK_active_mm, task_struct, active_mm);
+	BLANK();
+	OFFSET(MM_pgd, mm_struct, pgd);
 }
diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c
index 84a7d44edc6..11e310c567a 100644
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -58,6 +58,7 @@ EXPORT_SYMBOL(find_first_zero_bit);
 EXPORT_SYMBOL(find_next_zero_bit);
 EXPORT_SYMBOL(find_first_bit);
 EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(generic_find_next_le_bit);
 EXPORT_SYMBOL(generic_find_next_zero_le_bit);
 
 /* I/O primitives (lib/io-*.S) */
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 2b398cae110..33d49377b8b 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -334,9 +334,64 @@ save_full_context_ex:
 
 	/* Low-level exception handlers */
 handle_critical:
+	/*
+	 * AT32AP700x errata:
+	 *
+	 * After a Java stack overflow or underflow trap, any CPU
+	 * memory access may cause erratic behavior. This will happen
+	 * when the four least significant bits of the JOSP system
+	 * register contains any value between 9 and 15 (inclusive).
+	 *
+	 * Possible workarounds:
+	 *   - Don't use the Java Extension Module
+	 *   - Ensure that the stack overflow and underflow trap
+	 *     handlers do not do any memory access or trigger any
+	 *     exceptions before the overflow/underflow condition is
+	 *     cleared (by incrementing or decrementing the JOSP)
+	 *   - Make sure that JOSP does not contain any problematic
+	 *     value before doing any exception or interrupt
+	 *     processing.
+	 *   - Set up a critical exception handler which writes a
+	 *     known-to-be-safe value, e.g. 4, to JOSP before doing
+	 *     any further processing.
+	 *
+	 * We'll use the last workaround for now since we cannot
+	 * guarantee that user space processes don't use Java mode.
+	 * Non-well-behaving userland will be terminated with extreme
+	 * prejudice.
+	 */
+#ifdef CONFIG_CPU_AT32AP700X
+	/*
+	 * There's a chance we can't touch memory, so temporarily
+	 * borrow PTBR to save the stack pointer while we fix things
+	 * up...
+	 */
+	mtsr	SYSREG_PTBR, sp
+	mov	sp, 4
+	mtsr	SYSREG_JOSP, sp
+	mfsr	sp, SYSREG_PTBR
+	sub	pc, -2
+
+	/* Push most of pt_regs on stack. We'll do the rest later */
 	sub	sp, 4
-	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	pushm	r0-r12
+
+	/* PTBR mirrors current_thread_info()->task->active_mm->pgd */
+	get_thread_info r0
+	ld.w	r1, r0[TI_task]
+	ld.w	r2, r1[TSK_active_mm]
+	ld.w	r3, r2[MM_pgd]
+	mtsr	SYSREG_PTBR, r3
+#else
+	sub	sp, 4
+	pushm	r0-r12
+#endif
+	sub	r0, sp, -(14 * 4)
+	mov	r1, lr
+	mfsr	r2, SYSREG_RAR_EX
+	mfsr	r3, SYSREG_RSR_EX
+	pushm	r0-r3
+
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
 	rcall	do_critical_exception
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index ff820a9e743..2c08ac992ac 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -18,7 +18,7 @@
 #include <asm/sysreg.h>
 #include <asm/ocd.h>
 
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index ce48c14f434..d8e623c426c 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -26,8 +26,8 @@
 #include <asm/setup.h>
 #include <asm/sysreg.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
+#include <mach/board.h>
+#include <mach/init.h>
 
 extern int root_mountflags;
 
diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S
index 890286a1e62..673178e235f 100644
--- a/arch/avr32/kernel/syscall-stubs.S
+++ b/arch/avr32/kernel/syscall-stubs.S
@@ -109,3 +109,12 @@ __sys_epoll_pwait:
 	rcall	sys_epoll_pwait
 	sub	sp, -4
 	popm	pc
+
+	.global __sys_sync_file_range
+	.type	__sys_sync_file_range,@function
+__sys_sync_file_range:
+	pushm	lr
+	st.w	--sp, ARG6
+	rcall	sys_sync_file_range
+	sub	sp, -4
+	popm	pc
diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S
index 478bda4c4a0..7ee0057613b 100644
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@@ -275,7 +275,7 @@ sys_call_table:
 	.long	sys_set_robust_list
 	.long	sys_get_robust_list	/* 260 */
 	.long	__sys_splice
-	.long	sys_sync_file_range
+	.long	__sys_sync_file_range
 	.long	sys_tee
 	.long	sys_vmsplice
 	.long	__sys_epoll_pwait	/* 265 */
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index 7e7f32771ae..283481d74a5 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -15,7 +15,7 @@
 
 #include <asm/sysreg.h>
 
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 
 static cycle_t read_cycle_count(void)
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index b835c4c0136..0d987373bc0 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -116,15 +116,15 @@ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
 	switch (ret) {
 	case NOTIFY_OK:
 	case NOTIFY_STOP:
-		return;
+		break;
 	case NOTIFY_BAD:
 		die("Fatal Non-Maskable Interrupt", regs, SIGINT);
 	default:
+		printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
+		nmi_disable();
 		break;
 	}
-
-	printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
-	nmi_disable();
+	nmi_exit();
 }
 
 asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
diff --git a/arch/avr32/lib/findbit.S b/arch/avr32/lib/findbit.S
index c6b91dee857..997b33b2288 100644
--- a/arch/avr32/lib/findbit.S
+++ b/arch/avr32/lib/findbit.S
@@ -123,6 +123,36 @@ ENTRY(find_next_bit)
 	brgt	1b
 	retal	r11
 
+ENTRY(generic_find_next_le_bit)
+	lsr	r8, r10, 5
+	sub	r9, r11, r10
+	retle	r11
+
+	lsl	r8, 2
+	add	r12, r8
+	andl	r10, 31, COH
+	breq	1f
+
+	/* offset is not word-aligned. Handle the first (32 - r10) bits */
+	ldswp.w	r8, r12[0]
+	sub	r12, -4
+	lsr	r8, r8, r10
+	brne	.L_found
+
+	/* r9 = r9 - (32 - r10) = r9 + r10 - 32 */
+	add	r9, r10
+	sub	r9, 32
+	retle	r11
+
+	/* Main loop. offset must be word-aligned */
+1:	ldswp.w	r8, r12[0]
+	cp.w	r8, 0
+	brne	.L_found
+	sub	r12, -4
+	sub	r9, 32
+	brgt	1b
+	retal	r11
+
 ENTRY(generic_find_next_zero_le_bit)
 	lsr	r8, r10, 5
 	sub	r9, r11, r10
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index d5018e2eed2..514c9a9b009 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,4 +1,5 @@
 obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
+obj-y				+= hmatrix.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
 obj-$(CONFIG_PM)		+= pm.o
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 1617048c86c..e01dbe4ebb4 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -20,15 +20,15 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
-#include <asm/arch/sram.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/hmatrix.h>
+#include <mach/portmux.h>
+#include <mach/sram.h>
 
 #include <video/atmel_lcdc.h>
 
 #include "clock.h"
-#include "hmatrix.h"
 #include "pio.h"
 #include "pm.h"
 
@@ -725,7 +725,7 @@ static struct clk pico_clk = {
  * HMATRIX
  * -------------------------------------------------------------------- */
 
-static struct clk hmatrix_clk = {
+struct clk at32_hmatrix_clk = {
 	.name		= "hmatrix_clk",
 	.parent		= &pbb_clk,
 	.mode		= pbb_clk_mode,
@@ -733,12 +733,6 @@ static struct clk hmatrix_clk = {
 	.index		= 2,
 	.users		= 1,
 };
-#define HMATRIX_BASE	((void __iomem *)0xfff00800)
-
-#define hmatrix_readl(reg)					\
-	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-#define hmatrix_writel(reg,value)				\
-	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
 
 /*
  * Set bits in the HMATRIX Special Function Register (SFR) used by the
@@ -748,13 +742,7 @@ static struct clk hmatrix_clk = {
  */
 static inline void set_ebi_sfr_bits(u32 mask)
 {
-	u32 sfr;
-
-	clk_enable(&hmatrix_clk);
-	sfr = hmatrix_readl(SFR4);
-	sfr |= mask;
-	hmatrix_writel(SFR4, sfr);
-	clk_disable(&hmatrix_clk);
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, mask);
 }
 
 /* --------------------------------------------------------------------
@@ -1779,7 +1767,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 			return ret;
 
 		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
 		break;
 	case 5:
 		ret = platform_device_add_resources(pdev,
@@ -1789,7 +1777,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 			return ret;
 
 		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
 		break;
 	default:
 		return -EINVAL;
@@ -1905,7 +1893,7 @@ at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
 				sizeof(struct atmel_nand_data)))
 		goto fail;
 
-	set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
 	if (data->enable_pin)
 		at32_select_gpio(data->enable_pin,
 				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
@@ -2097,7 +2085,7 @@ struct clk *at32_clock_list[] = {
 	&pbb_clk,
 	&at32_pm_pclk,
 	&at32_intc0_pclk,
-	&hmatrix_clk,
+	&at32_hmatrix_clk,
 	&ebi_clk,
 	&hramc_clk,
 	&sdramc_clk,
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 4642117cc9a..6c27ddac5ad 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -16,6 +16,8 @@
 #include <linux/device.h>
 #include <linux/string.h>
 
+#include <mach/chip.h>
+
 #include "clock.h"
 
 static DEFINE_SPINLOCK(clk_lock);
diff --git a/arch/avr32/mach-at32ap/hmatrix.c b/arch/avr32/mach-at32ap/hmatrix.c
new file mode 100644
index 00000000000..48f5ede7746
--- /dev/null
+++ b/arch/avr32/mach-at32ap/hmatrix.c
@@ -0,0 +1,88 @@
+/*
+ * High-Speed Bus Matrix helper functions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/chip.h>
+#include <mach/hmatrix.h>
+
+static inline void __hmatrix_write_reg(unsigned long offset, u32 value)
+{
+	__raw_writel(value, (void __iomem __force *)(HMATRIX_BASE + offset));
+}
+
+static inline u32 __hmatrix_read_reg(unsigned long offset)
+{
+	return __raw_readl((void __iomem __force *)(HMATRIX_BASE + offset));
+}
+
+/**
+ * hmatrix_write_reg - write HMATRIX configuration register
+ * @offset: register offset
+ * @value: value to be written to the register at @offset
+ */
+void hmatrix_write_reg(unsigned long offset, u32 value)
+{
+	clk_enable(&at32_hmatrix_clk);
+	__hmatrix_write_reg(offset, value);
+	__hmatrix_read_reg(offset);
+	clk_disable(&at32_hmatrix_clk);
+}
+
+/**
+ * hmatrix_read_reg - read HMATRIX configuration register
+ * @offset: register offset
+ *
+ * Returns the value of the register at @offset.
+ */
+u32 hmatrix_read_reg(unsigned long offset)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(offset);
+	clk_disable(&at32_hmatrix_clk);
+
+	return value;
+}
+
+/**
+ * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register
+ * @slave_id: operate on the SFR belonging to this slave
+ * @mask: mask of bits to be set in the SFR
+ */
+void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	value |= mask;
+	__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
+	__hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	clk_disable(&at32_hmatrix_clk);
+}
+
+/**
+ * hmatrix_sfr_set_bits - clear bits in a slave's Special Function Register
+ * @slave_id: operate on the SFR belonging to this slave
+ * @mask: mask of bits to be cleared in the SFR
+ */
+void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	value &= ~mask;
+	__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
+	__hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	clk_disable(&at32_hmatrix_clk);
+}
diff --git a/arch/avr32/mach-at32ap/hmatrix.h b/arch/avr32/mach-at32ap/hmatrix.h
deleted file mode 100644
index d10bfb60d68..00000000000
--- a/arch/avr32/mach-at32ap/hmatrix.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Register definitions for High-Speed Bus Matrix
- */
-#ifndef __HMATRIX_H
-#define __HMATRIX_H
-
-/* HMATRIX register offsets */
-#define HMATRIX_MCFG0				0x0000
-#define HMATRIX_MCFG1				0x0004
-#define HMATRIX_MCFG2				0x0008
-#define HMATRIX_MCFG3				0x000c
-#define HMATRIX_MCFG4				0x0010
-#define HMATRIX_MCFG5				0x0014
-#define HMATRIX_MCFG6				0x0018
-#define HMATRIX_MCFG7				0x001c
-#define HMATRIX_MCFG8				0x0020
-#define HMATRIX_MCFG9				0x0024
-#define HMATRIX_MCFG10				0x0028
-#define HMATRIX_MCFG11				0x002c
-#define HMATRIX_MCFG12				0x0030
-#define HMATRIX_MCFG13				0x0034
-#define HMATRIX_MCFG14				0x0038
-#define HMATRIX_MCFG15				0x003c
-#define HMATRIX_SCFG0				0x0040
-#define HMATRIX_SCFG1				0x0044
-#define HMATRIX_SCFG2				0x0048
-#define HMATRIX_SCFG3				0x004c
-#define HMATRIX_SCFG4				0x0050
-#define HMATRIX_SCFG5				0x0054
-#define HMATRIX_SCFG6				0x0058
-#define HMATRIX_SCFG7				0x005c
-#define HMATRIX_SCFG8				0x0060
-#define HMATRIX_SCFG9				0x0064
-#define HMATRIX_SCFG10				0x0068
-#define HMATRIX_SCFG11				0x006c
-#define HMATRIX_SCFG12				0x0070
-#define HMATRIX_SCFG13				0x0074
-#define HMATRIX_SCFG14				0x0078
-#define HMATRIX_SCFG15				0x007c
-#define HMATRIX_PRAS0				0x0080
-#define HMATRIX_PRBS0				0x0084
-#define HMATRIX_PRAS1				0x0088
-#define HMATRIX_PRBS1				0x008c
-#define HMATRIX_PRAS2				0x0090
-#define HMATRIX_PRBS2				0x0094
-#define HMATRIX_PRAS3				0x0098
-#define HMATRIX_PRBS3				0x009c
-#define HMATRIX_PRAS4				0x00a0
-#define HMATRIX_PRBS4				0x00a4
-#define HMATRIX_PRAS5				0x00a8
-#define HMATRIX_PRBS5				0x00ac
-#define HMATRIX_PRAS6				0x00b0
-#define HMATRIX_PRBS6				0x00b4
-#define HMATRIX_PRAS7				0x00b8
-#define HMATRIX_PRBS7				0x00bc
-#define HMATRIX_PRAS8				0x00c0
-#define HMATRIX_PRBS8				0x00c4
-#define HMATRIX_PRAS9				0x00c8
-#define HMATRIX_PRBS9				0x00cc
-#define HMATRIX_PRAS10				0x00d0
-#define HMATRIX_PRBS10				0x00d4
-#define HMATRIX_PRAS11				0x00d8
-#define HMATRIX_PRBS11				0x00dc
-#define HMATRIX_PRAS12				0x00e0
-#define HMATRIX_PRBS12				0x00e4
-#define HMATRIX_PRAS13				0x00e8
-#define HMATRIX_PRBS13				0x00ec
-#define HMATRIX_PRAS14				0x00f0
-#define HMATRIX_PRBS14				0x00f4
-#define HMATRIX_PRAS15				0x00f8
-#define HMATRIX_PRBS15				0x00fc
-#define HMATRIX_MRCR				0x0100
-#define HMATRIX_SFR0				0x0110
-#define HMATRIX_SFR1				0x0114
-#define HMATRIX_SFR2				0x0118
-#define HMATRIX_SFR3				0x011c
-#define HMATRIX_SFR4				0x0120
-#define HMATRIX_SFR5				0x0124
-#define HMATRIX_SFR6				0x0128
-#define HMATRIX_SFR7				0x012c
-#define HMATRIX_SFR8				0x0130
-#define HMATRIX_SFR9				0x0134
-#define HMATRIX_SFR10				0x0138
-#define HMATRIX_SFR11				0x013c
-#define HMATRIX_SFR12				0x0140
-#define HMATRIX_SFR13				0x0144
-#define HMATRIX_SFR14				0x0148
-#define HMATRIX_SFR15				0x014c
-
-/* Bitfields in MCFGx */
-#define HMATRIX_ULBT_OFFSET			0
-#define HMATRIX_ULBT_SIZE			3
-
-/* Bitfields in SCFGx */
-#define HMATRIX_SLOT_CYCLE_OFFSET		0
-#define HMATRIX_SLOT_CYCLE_SIZE			8
-#define HMATRIX_DEFMSTR_TYPE_OFFSET		16
-#define HMATRIX_DEFMSTR_TYPE_SIZE		2
-#define HMATRIX_FIXED_DEFMSTR_OFFSET		18
-#define HMATRIX_FIXED_DEFMSTR_SIZE		4
-#define HMATRIX_ARBT_OFFSET			24
-#define HMATRIX_ARBT_SIZE			2
-
-/* Bitfields in PRASx */
-#define HMATRIX_M0PR_OFFSET			0
-#define HMATRIX_M0PR_SIZE			4
-#define HMATRIX_M1PR_OFFSET			4
-#define HMATRIX_M1PR_SIZE			4
-#define HMATRIX_M2PR_OFFSET			8
-#define HMATRIX_M2PR_SIZE			4
-#define HMATRIX_M3PR_OFFSET			12
-#define HMATRIX_M3PR_SIZE			4
-#define HMATRIX_M4PR_OFFSET			16
-#define HMATRIX_M4PR_SIZE			4
-#define HMATRIX_M5PR_OFFSET			20
-#define HMATRIX_M5PR_SIZE			4
-#define HMATRIX_M6PR_OFFSET			24
-#define HMATRIX_M6PR_SIZE			4
-#define HMATRIX_M7PR_OFFSET			28
-#define HMATRIX_M7PR_SIZE			4
-
-/* Bitfields in PRBSx */
-#define HMATRIX_M8PR_OFFSET			0
-#define HMATRIX_M8PR_SIZE			4
-#define HMATRIX_M9PR_OFFSET			4
-#define HMATRIX_M9PR_SIZE			4
-#define HMATRIX_M10PR_OFFSET			8
-#define HMATRIX_M10PR_SIZE			4
-#define HMATRIX_M11PR_OFFSET			12
-#define HMATRIX_M11PR_SIZE			4
-#define HMATRIX_M12PR_OFFSET			16
-#define HMATRIX_M12PR_SIZE			4
-#define HMATRIX_M13PR_OFFSET			20
-#define HMATRIX_M13PR_SIZE			4
-#define HMATRIX_M14PR_OFFSET			24
-#define HMATRIX_M14PR_SIZE			4
-#define HMATRIX_M15PR_OFFSET			28
-#define HMATRIX_M15PR_SIZE			4
-
-/* Bitfields in SFR4 */
-#define HMATRIX_CS1A_OFFSET			1
-#define HMATRIX_CS1A_SIZE			1
-#define HMATRIX_CS3A_OFFSET			3
-#define HMATRIX_CS3A_SIZE			1
-#define HMATRIX_CS4A_OFFSET			4
-#define HMATRIX_CS4A_SIZE			1
-#define HMATRIX_CS5A_OFFSET			5
-#define HMATRIX_CS5A_SIZE			1
-#define HMATRIX_DBPUC_OFFSET			8
-#define HMATRIX_DBPUC_SIZE			1
-
-/* Constants for ULBT */
-#define HMATRIX_ULBT_INFINITE			0
-#define HMATRIX_ULBT_SINGLE			1
-#define HMATRIX_ULBT_FOUR_BEAT			2
-#define HMATRIX_ULBT_EIGHT_BEAT			3
-#define HMATRIX_ULBT_SIXTEEN_BEAT		4
-
-/* Constants for DEFMSTR_TYPE */
-#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT		0
-#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT	1
-#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT	2
-
-/* Constants for ARBT */
-#define HMATRIX_ARBT_ROUND_ROBIN		0
-#define HMATRIX_ARBT_FIXED_PRIORITY		1
-
-/* Bit manipulation macros */
-#define HMATRIX_BIT(name)					\
-	(1 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BF(name,value)					\
-	(((value) & ((1 << HMATRIX_##name##_SIZE) - 1))		\
-	 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BFEXT(name,value)				\
-	(((value) >> HMATRIX_##name##_OFFSET)			\
-	 & ((1 << HMATRIX_##name##_SIZE) - 1))
-#define HMATRIX_BFINS(name,value,old)				\
-	(((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1)		\
-		    << HMATRIX_##name##_OFFSET))		\
-	 | HMATRIX_BF(name,value))
-
-#endif /* __HMATRIX_H */
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index b2d9bc61a35..2875c11be95 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -14,7 +14,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 #include "hsmc.h"
 
diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
index d18a3053be0..1e9852d65cc 100644
--- a/include/asm-avr32/arch-at32ap/at32ap700x.h
+++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
@@ -46,4 +46,41 @@
 #define DMAC_DMAREQ_2		9
 #define DMAC_DMAREQ_3		10
 
+/* HSB master IDs */
+#define HMATRIX_MASTER_CPU_DCACHE		0
+#define HMATRIX_MASTER_CPU_ICACHE		1
+#define HMATRIX_MASTER_PDC			2
+#define HMATRIX_MASTER_ISI			3
+#define HMATRIX_MASTER_USBA			4
+#define HMATRIX_MASTER_LCDC			5
+#define HMATRIX_MASTER_MACB0			6
+#define HMATRIX_MASTER_MACB1			7
+#define HMATRIX_MASTER_DMACA_M0			8
+#define HMATRIX_MASTER_DMACA_M1			9
+
+/* HSB slave IDs */
+#define HMATRIX_SLAVE_SRAM0			0
+#define HMATRIX_SLAVE_SRAM1			1
+#define HMATRIX_SLAVE_PBA			2
+#define HMATRIX_SLAVE_PBB			3
+#define HMATRIX_SLAVE_EBI			4
+#define HMATRIX_SLAVE_USBA			5
+#define HMATRIX_SLAVE_LCDC			6
+#define HMATRIX_SLAVE_DMACA			7
+
+/* Bits in HMATRIX SFR4 (EBI) */
+#define HMATRIX_EBI_SDRAM_ENABLE		(1 << 1)
+#define HMATRIX_EBI_NAND_ENABLE			(1 << 3)
+#define HMATRIX_EBI_CF0_ENABLE			(1 << 4)
+#define HMATRIX_EBI_CF1_ENABLE			(1 << 5)
+#define HMATRIX_EBI_PULLUP_DISABLE		(1 << 8)
+
+/*
+ * Base addresses of controllers that may be accessed early by
+ * platform code.
+ */
+#define PM_BASE		0xfff00000
+#define HMATRIX_BASE	0xfff00800
+#define SDRAMC_BASE	0xfff03800
+
 #endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index e60e9076544..e60e9076544 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
diff --git a/arch/avr32/mach-at32ap/include/mach/chip.h b/arch/avr32/mach-at32ap/include/mach/chip.h
new file mode 100644
index 00000000000..5efca6da6ac
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/chip.h
@@ -0,0 +1,19 @@
+/*
+ * AVR32 chip-specific definitions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_CHIP_H__
+#define __ASM_AVR32_ARCH_CHIP_H__
+
+#if defined(CONFIG_CPU_AT32AP700X)
+# include <mach/at32ap700x.h>
+#else
+# error Unknown chip type selected
+#endif
+
+#endif /* __ASM_AVR32_ARCH_CHIP_H__ */
diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
index 44d0bfa1f40..44d0bfa1f40 100644
--- a/include/asm-avr32/arch-at32ap/cpu.h
+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
diff --git a/include/asm-avr32/arch-at32ap/gpio.h b/arch/avr32/mach-at32ap/include/mach/gpio.h
index 0180f584ef0..0180f584ef0 100644
--- a/include/asm-avr32/arch-at32ap/gpio.h
+++ b/arch/avr32/mach-at32ap/include/mach/gpio.h
diff --git a/arch/avr32/mach-at32ap/include/mach/hmatrix.h b/arch/avr32/mach-at32ap/include/mach/hmatrix.h
new file mode 100644
index 00000000000..7a368f227eb
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/hmatrix.h
@@ -0,0 +1,55 @@
+/*
+ * High-Speed Bus Matrix configuration registers
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __HMATRIX_H
+#define __HMATRIX_H
+
+extern struct clk at32_hmatrix_clk;
+
+void hmatrix_write_reg(unsigned long offset, u32 value);
+u32 hmatrix_read_reg(unsigned long offset);
+
+void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask);
+void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
+
+/* Master Configuration register */
+#define HMATRIX_MCFG(m)			(0x0000 + 4 * (m))
+/* Undefined length burst limit */
+# define HMATRIX_MCFG_ULBT_INFINITE	0	/* Infinite length */
+# define HMATRIX_MCFG_ULBT_SINGLE	1	/* Single Access */
+# define HMATRIX_MCFG_ULBT_FOUR_BEAT	2	/* Four beat */
+# define HMATRIX_MCFG_ULBT_EIGHT_BEAT	3	/* Eight beat */
+# define HMATRIX_MCFG_ULBT_SIXTEEN_BEAT	4	/* Sixteen beat */
+
+/* Slave Configuration register */
+#define HMATRIX_SCFG(s)			(0x0040 + 4 * (s))
+# define HMATRIX_SCFG_SLOT_CYCLE(x)	((x) <<  0)	/* Max burst cycles */
+# define HMATRIX_SCFG_DEFMSTR_NONE	(  0 << 16)	/* No default master */
+# define HMATRIX_SCFG_DEFMSTR_LAST	(  1 << 16)	/* Last def master */
+# define HMATRIX_SCFG_DEFMSTR_FIXED	(  2 << 16)	/* Fixed def master */
+# define HMATRIX_SCFG_FIXED_DEFMSTR(m)	((m) << 18)	/* Fixed master ID */
+# define HMATRIX_SCFG_ARBT_ROUND_ROBIN	(  0 << 24)	/* RR arbitration */
+# define HMATRIX_SCFG_ARBT_FIXED_PRIO	(  1 << 24)	/* Fixed priority */
+
+/* Slave Priority register A (master 0..7) */
+#define HMATRIX_PRAS(s)			(0x0080 + 8 * (s))
+# define HMATRIX_PRAS_PRIO(m, p)	((p) << ((m) * 4))
+
+/* Slave Priority register A (master 8..15) */
+#define HMATRIX_PRBS(s)			(0x0084 + 8 * (s))
+# define HMATRIX_PRBS_PRIO(m, p)	((p) << (((m) - 8) * 4))
+
+/* Master Remap Control Register */
+#define HMATRIX_MRCR				0x0100
+# define HMATRIX_MRCR_REMAP(m)		(  1 << (m))	/* Remap master m */
+
+/* Special Function Register. Bit definitions are chip-specific */
+#define HMATRIX_SFR(s)			(0x0110 + 4 * (s))
+
+#endif /* __HMATRIX_H */
diff --git a/include/asm-avr32/arch-at32ap/init.h b/arch/avr32/mach-at32ap/include/mach/init.h
index bc40e3d4615..bc40e3d4615 100644
--- a/include/asm-avr32/arch-at32ap/init.h
+++ b/arch/avr32/mach-at32ap/include/mach/init.h
diff --git a/include/asm-avr32/arch-at32ap/io.h b/arch/avr32/mach-at32ap/include/mach/io.h
index 4ec6abc68ea..4ec6abc68ea 100644
--- a/include/asm-avr32/arch-at32ap/io.h
+++ b/arch/avr32/mach-at32ap/include/mach/io.h
diff --git a/include/asm-avr32/arch-at32ap/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h
index 608e350368c..608e350368c 100644
--- a/include/asm-avr32/arch-at32ap/irq.h
+++ b/arch/avr32/mach-at32ap/include/mach/irq.h
diff --git a/include/asm-avr32/arch-at32ap/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h
index 979b355b77b..979b355b77b 100644
--- a/include/asm-avr32/arch-at32ap/pm.h
+++ b/arch/avr32/mach-at32ap/include/mach/pm.h
diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h
index b1abe6b4e4e..b1abe6b4e4e 100644
--- a/include/asm-avr32/arch-at32ap/portmux.h
+++ b/arch/avr32/mach-at32ap/include/mach/portmux.h
diff --git a/include/asm-avr32/arch-at32ap/smc.h b/arch/avr32/mach-at32ap/include/mach/smc.h
index c98eea44a70..c98eea44a70 100644
--- a/include/asm-avr32/arch-at32ap/smc.h
+++ b/arch/avr32/mach-at32ap/include/mach/smc.h
diff --git a/include/asm-avr32/arch-at32ap/sram.h b/arch/avr32/mach-at32ap/include/mach/sram.h
index 4838dae7601..4838dae7601 100644
--- a/include/asm-avr32/arch-at32ap/sram.h
+++ b/arch/avr32/mach-at32ap/include/mach/sram.h
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 296294f8ed8..405ee6bad4c 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -17,7 +17,7 @@
 #include <asm/gpio.h>
 #include <asm/io.h>
 
-#include <asm/arch/portmux.h>
+#include <mach/portmux.h>
 
 #include "pio.h"
 
diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
index 0a53ad314ff..17503b0ed6c 100644
--- a/arch/avr32/mach-at32ap/pm-at32ap700x.S
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -10,7 +10,7 @@
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 #include "pm.h"
 #include "sdramc.h"
@@ -134,7 +134,7 @@ pm_standby:
 	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
 	bfins	r10, r11, 0, 2		/* LPCB <- self Refresh */
 	sync	0			/* flush write buffer */
-	st.w	r12[SDRAMC_LPR], r11	/* put SDRAM in self-refresh mode */
+	st.w	r12[SDRAMC_LPR], r10	/* put SDRAM in self-refresh mode */
 	ld.w	r11, r12[SDRAMC_LPR]
 	unmask_interrupts
 	sleep	CPU_SLEEP_FROZEN
diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c
index 0b764320135..f021edfeaab 100644
--- a/arch/avr32/mach-at32ap/pm.c
+++ b/arch/avr32/mach-at32ap/pm.c
@@ -14,11 +14,9 @@
 #include <asm/cacheflush.h>
 #include <asm/sysreg.h>
 
-#include <asm/arch/pm.h>
-#include <asm/arch/sram.h>
-
-/* FIXME: This is only valid for AP7000 */
-#define SDRAMC_BASE	0xfff03800
+#include <mach/chip.h>
+#include <mach/pm.h>
+#include <mach/sram.h>
 
 #include "sdramc.h"
 
diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
index 694d521edc2..532a3732c21 100644
--- a/arch/avr32/mach-at32ap/pm.h
+++ b/arch/avr32/mach-at32ap/pm.h
@@ -4,14 +4,6 @@
 #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
 #define __ARCH_AVR32_MACH_AT32AP_PM_H__
 
-/*
- * We can reduce the code size a bit by using a constant here. Since
- * this file is only used on AVR32 AP CPUs with segmentation enabled,
- * it's safe to not use ioremap. Generic drivers should of course
- * never do this.
- */
-#define AT32_PM_BASE	0xfff00000
-
 /* PM register offsets */
 #define PM_MCCTRL				0x0000
 #define PM_CKSEL				0x0004
@@ -113,8 +105,8 @@
 
 /* Register access macros */
 #define pm_readl(reg)							\
-	__raw_readl((void __iomem __force *)AT32_PM_BASE + PM_##reg)
+	__raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
 #define pm_writel(reg,value)						\
-	__raw_writel((value), (void __iomem __force *)AT32_PM_BASE + PM_##reg)
+	__raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
 
 #endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 5a097c46bc4..4154ff1101f 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -249,7 +249,7 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN532_IP0X)
+	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
 	default y
 
 source "arch/blackfin/mach-bf527/Kconfig"
@@ -292,7 +292,7 @@ config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
 	default "11059200" if BFIN533_STAMP
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
+	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP)
 	default "30000000" if BFIN561_EZKIT
 	default "24576000" if PNAV10
 	default "10000000" if BFIN532_IP0X
@@ -332,7 +332,7 @@ config VCO_MULT
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
-	default "16" if H8606_HVSISTEMAS
+	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP)
 	help
 	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.
 	  PLL Frequency = (Crystal Frequency) * (this setting)
@@ -622,6 +622,33 @@ config CPLB_SWITCH_TAB_L1
 	  If enabled, the CPLB Switch Tables are linked
 	  into L1 data memory. (less latency)
 
+comment "Speed Optimizations"
+config BFIN_INS_LOWOVERHEAD
+	bool "ins[bwl] low overhead, higher interrupt latency"
+	default y
+	help
+	  Reads on the Blackfin are speculative. In Blackfin terms, this means
+	  they can be interrupted at any time (even after they have been issued
+	  on to the external bus), and re-issued after the interrupt occurs.
+	  For memory - this is not a big deal, since memory does not change if
+	  it sees a read.
+
+	  If a FIFO is sitting on the end of the read, it will see two reads,
+	  when the core only sees one since the FIFO receives both the read
+	  which is cancelled (and not delivered to the core) and the one which
+	  is re-issued (which is delivered to the core).
+
+	  To solve this, interrupts are turned off before reads occur to
+	  I/O space. This option controls which the overhead/latency of
+	  controlling interrupts during this time
+	   "n" turns interrupts off every read
+		(higher overhead, but lower interrupt latency)
+	   "y" turns interrupts off every loop
+		(low overhead, but longer interrupt latency)
+
+	  default behavior is to leave this set to on (type "Y"). If you are experiencing
+	  interrupt latency issues, it is safe and OK to turn this off.
+
 endmenu
 
 
@@ -828,6 +855,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 
 config PCI
 	bool "PCI support"
+	depends on BROKEN
 	help
 	  Support for PCI bus.
 
@@ -933,13 +961,6 @@ endchoice
 comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
 	depends on PM
 
-config PM_BFIN_WAKE_RTC
-	bool "Allow Wake-Up from RESET and on-chip RTC"
-	depends on PM
-	default n
-	help
-	  Enable RTC Wake-Up (Voltage Regulator Power-Up)
-
 config PM_BFIN_WAKE_PH6
 	bool "Allow Wake-Up from on-chip PHY or PH6 GP"
 	depends on PM && (BF52x || BF534 || BF536 || BF537)
@@ -947,41 +968,12 @@ config PM_BFIN_WAKE_PH6
 	help
 	  Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
 
-config PM_BFIN_WAKE_CAN
-	bool "Allow Wake-Up from on-chip CAN0/1"
-	depends on PM && (BF54x || BF534 || BF536 || BF537)
-	default n
-	help
-	  Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up)
-
 config PM_BFIN_WAKE_GP
 	bool "Allow Wake-Up from GPIOs"
 	depends on PM && BF54x
 	default n
 	help
 	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
-
-config PM_BFIN_WAKE_USB
-	bool "Allow Wake-Up from on-chip USB"
-	depends on PM && (BF54x || BF52x)
-	default n
-	help
-	  Enable USB Wake-Up (Voltage Regulator Power-Up)
-
-config PM_BFIN_WAKE_KEYPAD
-	bool "Allow Wake-Up from on-chip Keypad"
-	depends on PM && BF54x
-	default n
-	help
-	  Enable Keypad Wake-Up (Voltage Regulator Power-Up)
-
-config PM_BFIN_WAKE_ROTARY
-	bool "Allow Wake-Up from on-chip Rotary"
-	depends on PM && BF54x
-	default n
-	help
-	  Enable Rotary Wake-Up (Voltage Regulator Power-Up)
-
 endmenu
 
 menu "CPU Frequency scaling"
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 9564731ad3a..eac0533d6e4 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -98,36 +98,20 @@ libs-y   += arch/$(ARCH)/lib/
 
 drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
 
+machdirs	:= $(patsubst %,arch/blackfin/mach-%/, $(machine-y))
 
+KBUILD_CFLAGS += -Iarch/$(ARCH)/include/
+KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include
 
-#	Update machine arch symlinks if something which affects
-#	them changed.  We use .mach to indicate when they were updated
-#	last, otherwise make uses the target directory mtime.
-
-       show_mach_symlink = :
- quiet_show_mach_symlink = echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
-silent_show_mach_symlink = :
-include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@$($(quiet)show_mach_symlink)
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-$(ARCH)
-	$(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach
-else
-	$(Q)ln -fsn mach-$(MACHINE) include/asm-$(ARCH)/mach
-endif
-	@touch $@
+KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
 
 CLEAN_FILES += \
-	include/asm-$(ARCH)/asm-offsets.h \
+	arch/$(ARCH)/include/asm/asm-offsets.h \
 	arch/$(ARCH)/kernel/asm-offsets.s \
-	include/asm-$(ARCH)/mach \
-	include/asm-$(ARCH)/.mach
 
-archprepare: include/asm-blackfin/.mach
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
 BOOT_TARGETS = vmImage
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
new file mode 100644
index 00000000000..2921f9952d5
--- /dev/null
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -0,0 +1,1195 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.2
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+CONFIG_BF532=y
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_MEM_MT48LC32M16A2TG_75=y
+# CONFIG_BFIN533_EZKIT is not set
+# CONFIG_BFIN533_STAMP is not set
+# CONFIG_BFIN533_BLUETECHNIX_CM is not set
+# CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
+CONFIG_BLACKSTAMP=y
+# CONFIG_GENERIC_BF533_BOARD is not set
+
+#
+# BF533/2/1 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_UART_ERROR=7
+CONFIG_SPORT0_ERROR=7
+CONFIG_SPI_ERROR=7
+CONFIG_SPORT1_ERROR=7
+CONFIG_PPI_ERROR=7
+CONFIG_DMA_ERROR=7
+CONFIG_PLLWAKE_ERROR=7
+CONFIG_RTC_ERROR=8
+CONFIG_DMA0_PPI=8
+CONFIG_DMA1_SPORT0RX=9
+CONFIG_DMA2_SPORT0TX=9
+CONFIG_DMA3_SPORT1RX=9
+CONFIG_DMA4_SPORT1TX=9
+CONFIG_DMA5_SPI=10
+CONFIG_DMA6_UARTRX=10
+CONFIG_DMA7_UARTTX=10
+CONFIG_TIMER0=11
+CONFIG_TIMER1=11
+CONFIG_TIMER2=11
+CONFIG_PFA=12
+CONFIG_PFB=12
+CONFIG_MEMDMA0=13
+CONFIG_MEMDMA1=13
+CONFIG_WDTIMER=13
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+# CONFIG_PLL_BYPASS is not set
+# CONFIG_CLKIN_HALF is not set
+CONFIG_VCO_MULT=16
+CONFIG_CCLK_DIV_1=y
+# CONFIG_CCLK_DIV_2 is not set
+# CONFIG_CCLK_DIV_4 is not set
+# CONFIG_CCLK_DIV_8 is not set
+CONFIG_SCLK_DIV=3
+CONFIG_MAX_MEM_SIZE=64
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Memory Setup
+#
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+# CONFIG_RAMKERNEL is not set
+CONFIG_ROMKERNEL=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xAAC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# Possible Suspend Mem / Hibernate Wake-Up Sources
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+CONFIG_BF5xx_PPI=y
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=y
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_SPI=y
+# CONFIG_SPI_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
new file mode 100644
index 00000000000..c482ee171f9
--- /dev/null
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -0,0 +1,693 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24.7
+# Thu Jul 31 00:53:15 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+CONFIG_BF537=y
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+# CONFIG_BFIN537_STAMP is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+CONFIG_BFIN537_BLUETECHNIX_TCM=y
+# CONFIG_PNAV10 is not set
+# CONFIG_CAMSIG_MINOTAUR is not set
+# CONFIG_GENERIC_BF537_BOARD is not set
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_PROG_INTA=12
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=32
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_CACHELINE_ALIGNED_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/include/asm-blackfin/.gitignore b/arch/blackfin/include/asm/.gitignore
index 7858564a446..7858564a446 100644
--- a/include/asm-blackfin/.gitignore
+++ b/arch/blackfin/include/asm/.gitignore
diff --git a/include/asm-blackfin/Kbuild b/arch/blackfin/include/asm/Kbuild
index 71f8fe78325..606ecfdcc96 100644
--- a/include/asm-blackfin/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -1,3 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += fixed_code.h
+unifdef-y += fixed_code.h
diff --git a/include/asm-blackfin/a.out.h b/arch/blackfin/include/asm/a.out.h
index 6c3d652ebd3..6c3d652ebd3 100644
--- a/include/asm-blackfin/a.out.h
+++ b/arch/blackfin/include/asm/a.out.h
diff --git a/include/asm-blackfin/atomic.h b/arch/blackfin/include/asm/atomic.h
index 7cf50871860..7cf50871860 100644
--- a/include/asm-blackfin/atomic.h
+++ b/arch/blackfin/include/asm/atomic.h
diff --git a/include/asm-blackfin/auxvec.h b/arch/blackfin/include/asm/auxvec.h
index 215506cd87b..215506cd87b 100644
--- a/include/asm-blackfin/auxvec.h
+++ b/arch/blackfin/include/asm/auxvec.h
diff --git a/include/asm-blackfin/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index 320aa5e167e..7ba70de66f2 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -56,37 +56,20 @@ extern void dump_bfin_process(struct pt_regs *regs);
 extern void dump_bfin_mem(struct pt_regs *regs);
 extern void dump_bfin_trace_buffer(void);
 
+/* init functions only */
 extern int init_arch_irq(void);
-extern void bfin_reset(void);
-extern void _cplb_hdr(void);
-/* Blackfin cache functions */
 extern void bfin_icache_init(void);
 extern void bfin_dcache_init(void);
-extern int read_iloc(void);
-extern int bfin_console_init(void);
-extern asmlinkage void lower_to_irq14(void);
-extern asmlinkage void bfin_return_from_exception(void);
 extern void init_exception_vectors(void);
-extern void init_dma(void);
 extern void program_IAR(void);
-extern void evt14_softirq(void);
+
+extern void bfin_reset(void);
+extern asmlinkage void lower_to_irq14(void);
+extern asmlinkage void bfin_return_from_exception(void);
+extern asmlinkage void evt14_softirq(void);
 extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
-extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type);
 extern int bfin_internal_set_wake(unsigned int irq, unsigned int state);
 
-extern asmlinkage void finish_atomic_sections (struct pt_regs *regs);
-extern char fixed_code_start;
-extern char fixed_code_end;
-extern int atomic_xchg32(void);
-extern int atomic_cas32(void);
-extern int atomic_add32(void);
-extern int atomic_sub32(void);
-extern int atomic_ior32(void);
-extern int atomic_and32(void);
-extern int atomic_xor32(void);
-extern void safe_user_instruction(void);
-extern void sigreturn_stub(void);
-
 extern void *l1_data_A_sram_alloc(size_t);
 extern void *l1_data_B_sram_alloc(size_t);
 extern void *l1_inst_sram_alloc(size_t);
@@ -110,11 +93,10 @@ extern void *sram_alloc_with_lsl(size_t, unsigned long);
 extern int sram_free_with_lsl(const void*);
 
 extern const char bfin_board_name[];
-extern unsigned long wall_jiffies;
 
 extern unsigned long bfin_sic_iwr[];
+extern unsigned vr_wakeup;
 extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
-extern struct file_operations dpmc_fops;
 extern unsigned long _ramstart, _ramend, _rambase;
 extern unsigned long memory_start, memory_end, physical_mem_end;
 extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
@@ -122,8 +104,12 @@ extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
 	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
 	_ebss_l2[], _l2_lma_start[];
 
-#ifdef CONFIG_MTD_UCLINUX
+/* only used when CONFIG_MTD_UCLINUX */
 extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+
+#ifdef CONFIG_BFIN_ICACHE_LOCK
+extern void cache_grab_lock(int way);
+extern void cache_lock(int way);
 #endif
 
 #endif
diff --git a/include/asm-blackfin/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
index 9fa19158e38..9fa19158e38 100644
--- a/include/asm-blackfin/bfin5xx_spi.h
+++ b/arch/blackfin/include/asm/bfin5xx_spi.h
diff --git a/include/asm-blackfin/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h
index fccbb595464..fccbb595464 100644
--- a/include/asm-blackfin/bfin_simple_timer.h
+++ b/arch/blackfin/include/asm/bfin_simple_timer.h
diff --git a/include/asm-blackfin/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index c76ed8def30..c76ed8def30 100644
--- a/include/asm-blackfin/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
diff --git a/include/asm-blackfin/bitops.h b/arch/blackfin/include/asm/bitops.h
index b39a175c79c..b39a175c79c 100644
--- a/include/asm-blackfin/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
diff --git a/include/asm-blackfin/blackfin.h b/arch/blackfin/include/asm/blackfin.h
index 984b74f0a2e..8749b0e321a 100644
--- a/include/asm-blackfin/blackfin.h
+++ b/arch/blackfin/include/asm/blackfin.h
@@ -11,7 +11,7 @@
 #define HI(con32) (((con32) >> 16) & 0xFFFF)
 #define hi(con32) (((con32) >> 16) & 0xFFFF)
 
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 #ifndef __ASSEMBLY__
 
@@ -86,7 +86,7 @@ static inline void CSYNC(void)
 
 #endif /* __ASSEMBLY__ */
 
-#include <asm/mach/blackfin.h>
+#include <mach/blackfin.h>
 #include <asm/bfin-global.h>
 
 #endif				/* _BLACKFIN_H_ */
diff --git a/include/asm-blackfin/bug.h b/arch/blackfin/include/asm/bug.h
index 6d3e11b1fc5..6d3e11b1fc5 100644
--- a/include/asm-blackfin/bug.h
+++ b/arch/blackfin/include/asm/bug.h
diff --git a/include/asm-blackfin/bugs.h b/arch/blackfin/include/asm/bugs.h
index 9093c9c1fb8..9093c9c1fb8 100644
--- a/include/asm-blackfin/bugs.h
+++ b/arch/blackfin/include/asm/bugs.h
diff --git a/include/asm-blackfin/byteorder.h b/arch/blackfin/include/asm/byteorder.h
index 6a673d42da1..6a673d42da1 100644
--- a/include/asm-blackfin/byteorder.h
+++ b/arch/blackfin/include/asm/byteorder.h
diff --git a/include/asm-blackfin/cache.h b/arch/blackfin/include/asm/cache.h
index 023d72133b5..023d72133b5 100644
--- a/include/asm-blackfin/cache.h
+++ b/arch/blackfin/include/asm/cache.h
diff --git a/include/asm-blackfin/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index d81a77545a0..d81a77545a0 100644
--- a/include/asm-blackfin/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h
index ede210eca4e..35f841bce57 100644
--- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
+++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h
@@ -33,17 +33,13 @@
 #warning cdef_LPBlackfin.h should only be included for 532 compatible chips.
 #endif
 */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /*Cache & SRAM Memory*/
 #define bfin_read_SRAM_BASE_ADDRESS()        bfin_read32(SRAM_BASE_ADDRESS)
 #define bfin_write_SRAM_BASE_ADDRESS(val)    bfin_write32(SRAM_BASE_ADDRESS,val)
 #define bfin_read_DMEM_CONTROL()             bfin_read32(DMEM_CONTROL)
-#if ANOMALY_05000125
-extern void bfin_write_DMEM_CONTROL(unsigned int val);
-#else
 #define bfin_write_DMEM_CONTROL(val)         bfin_write32(DMEM_CONTROL,val)
-#endif
 #define bfin_read_DCPLB_STATUS()             bfin_read32(DCPLB_STATUS)
 #define bfin_write_DCPLB_STATUS(val)         bfin_write32(DCPLB_STATUS,val)
 #define bfin_read_DCPLB_FAULT_ADDR()         bfin_read32(DCPLB_FAULT_ADDR)
@@ -129,11 +125,7 @@ extern void bfin_write_DMEM_CONTROL(unsigned int val);
 #define DTEST_DATA3            0xFFE0040C
 */
 #define bfin_read_IMEM_CONTROL()             bfin_read32(IMEM_CONTROL)
-#if ANOMALY_05000125
-extern void bfin_write_IMEM_CONTROL(unsigned int val);
-#else
 #define bfin_write_IMEM_CONTROL(val)         bfin_write32(IMEM_CONTROL,val)
-#endif
 #define bfin_read_ICPLB_STATUS()             bfin_read32(ICPLB_STATUS)
 #define bfin_write_ICPLB_STATUS(val)         bfin_write32(ICPLB_STATUS,val)
 #define bfin_read_ICPLB_FAULT_ADDR()         bfin_read32(ICPLB_FAULT_ADDR)
diff --git a/include/asm-blackfin/checksum.h b/arch/blackfin/include/asm/checksum.h
index 6f6af2b8e9e..6f6af2b8e9e 100644
--- a/include/asm-blackfin/checksum.h
+++ b/arch/blackfin/include/asm/checksum.h
diff --git a/include/asm-blackfin/mach-common/clocks.h b/arch/blackfin/include/asm/clocks.h
index 033bba92d61..033bba92d61 100644
--- a/include/asm-blackfin/mach-common/clocks.h
+++ b/arch/blackfin/include/asm/clocks.h
diff --git a/include/asm-blackfin/mach-common/context.S b/arch/blackfin/include/asm/context.S
index c0e630edfb9..c0e630edfb9 100644
--- a/include/asm-blackfin/mach-common/context.S
+++ b/arch/blackfin/include/asm/context.S
diff --git a/include/asm-blackfin/cplb-mpu.h b/arch/blackfin/include/asm/cplb-mpu.h
index 75c67b99d60..75c67b99d60 100644
--- a/include/asm-blackfin/cplb-mpu.h
+++ b/arch/blackfin/include/asm/cplb-mpu.h
diff --git a/include/asm-blackfin/cplb.h b/arch/blackfin/include/asm/cplb.h
index 5b0da9a69b6..05d6f05fb74 100644
--- a/include/asm-blackfin/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -31,7 +31,7 @@
 #define _CPLB_H
 
 #include <asm/blackfin.h>
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 #define SDRAM_IGENERIC    (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
 #define SDRAM_IKERNEL     (SDRAM_IGENERIC | CPLB_LOCK)
diff --git a/include/asm-blackfin/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h
index 0eb1c1b685a..0eb1c1b685a 100644
--- a/include/asm-blackfin/cplbinit.h
+++ b/arch/blackfin/include/asm/cplbinit.h
diff --git a/include/asm-blackfin/cpumask.h b/arch/blackfin/include/asm/cpumask.h
index b20a8e9012c..b20a8e9012c 100644
--- a/include/asm-blackfin/cpumask.h
+++ b/arch/blackfin/include/asm/cpumask.h
diff --git a/include/asm-blackfin/cputime.h b/arch/blackfin/include/asm/cputime.h
index 2b19705f988..2b19705f988 100644
--- a/include/asm-blackfin/cputime.h
+++ b/arch/blackfin/include/asm/cputime.h
diff --git a/include/asm-blackfin/current.h b/arch/blackfin/include/asm/current.h
index 31918d29122..31918d29122 100644
--- a/include/asm-blackfin/current.h
+++ b/arch/blackfin/include/asm/current.h
diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index e8967f6124f..6341eebff3d 100644
--- a/include/asm-blackfin/mach-common/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -31,7 +31,7 @@
 #ifndef _DEF_LPBLACKFIN_H
 #define _DEF_LPBLACKFIN_H
 
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 #define MK_BMSK_(x) (1<<x)
 
diff --git a/include/asm-blackfin/delay.h b/arch/blackfin/include/asm/delay.h
index 473a8113277..0889c3abb59 100644
--- a/include/asm-blackfin/delay.h
+++ b/arch/blackfin/include/asm/delay.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_DELAY_H__
 #define __ASM_DELAY_H__
 
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 static inline void __delay(unsigned long loops)
 {
diff --git a/include/asm-blackfin/device.h b/arch/blackfin/include/asm/device.h
index d8f9872b0e2..d8f9872b0e2 100644
--- a/include/asm-blackfin/device.h
+++ b/arch/blackfin/include/asm/device.h
diff --git a/include/asm-blackfin/div64.h b/arch/blackfin/include/asm/div64.h
index 6cd978cefb2..6cd978cefb2 100644
--- a/include/asm-blackfin/div64.h
+++ b/arch/blackfin/include/asm/div64.h
diff --git a/include/asm-blackfin/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index 1a13c2fc366..1a13c2fc366 100644
--- a/include/asm-blackfin/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
diff --git a/include/asm-blackfin/dma.h b/arch/blackfin/include/asm/dma.h
index 3cd4b522aa3..6509733bb0f 100644
--- a/include/asm-blackfin/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -35,7 +35,7 @@
 #include <asm/signal.h>
 
 #include <linux/kernel.h>
-#include <asm/mach/dma.h>
+#include <mach/dma.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <asm/blackfin.h>
diff --git a/include/asm-blackfin/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index de28e6e018b..96e8208f929 100644
--- a/include/asm-blackfin/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -11,7 +11,6 @@
 #ifndef __ASSEMBLY__
 
 void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
-void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 void do_hibernate(int wakeup);
diff --git a/include/asm-blackfin/early_printk.h b/arch/blackfin/include/asm/early_printk.h
index 110f1c1f845..110f1c1f845 100644
--- a/include/asm-blackfin/early_printk.h
+++ b/arch/blackfin/include/asm/early_printk.h
diff --git a/include/asm-blackfin/elf.h b/arch/blackfin/include/asm/elf.h
index 67a03a8a353..67a03a8a353 100644
--- a/include/asm-blackfin/elf.h
+++ b/arch/blackfin/include/asm/elf.h
diff --git a/include/asm-blackfin/emergency-restart.h b/arch/blackfin/include/asm/emergency-restart.h
index 27f6c785d10..27f6c785d10 100644
--- a/include/asm-blackfin/emergency-restart.h
+++ b/arch/blackfin/include/asm/emergency-restart.h
diff --git a/include/asm-blackfin/entry.h b/arch/blackfin/include/asm/entry.h
index c4f721e0d00..c4f721e0d00 100644
--- a/include/asm-blackfin/entry.h
+++ b/arch/blackfin/include/asm/entry.h
diff --git a/include/asm-blackfin/errno.h b/arch/blackfin/include/asm/errno.h
index 164e4f39bb5..164e4f39bb5 100644
--- a/include/asm-blackfin/errno.h
+++ b/arch/blackfin/include/asm/errno.h
diff --git a/include/asm-blackfin/fb.h b/arch/blackfin/include/asm/fb.h
index c7df3803099..c7df3803099 100644
--- a/include/asm-blackfin/fb.h
+++ b/arch/blackfin/include/asm/fb.h
diff --git a/include/asm-blackfin/fcntl.h b/arch/blackfin/include/asm/fcntl.h
index 9c403712785..9c403712785 100644
--- a/include/asm-blackfin/fcntl.h
+++ b/arch/blackfin/include/asm/fcntl.h
diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h
new file mode 100644
index 00000000000..32c4d495d84
--- /dev/null
+++ b/arch/blackfin/include/asm/fixed_code.h
@@ -0,0 +1,46 @@
+/* This file defines the fixed addresses where userspace programs can find
+   atomic code sequences.  */
+
+#ifndef __BFIN_ASM_FIXED_CODE_H__
+#define __BFIN_ASM_FIXED_CODE_H__
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/linkage.h>
+#include <linux/ptrace.h>
+extern asmlinkage void finish_atomic_sections(struct pt_regs *regs);
+extern char fixed_code_start;
+extern char fixed_code_end;
+extern int atomic_xchg32(void);
+extern int atomic_cas32(void);
+extern int atomic_add32(void);
+extern int atomic_sub32(void);
+extern int atomic_ior32(void);
+extern int atomic_and32(void);
+extern int atomic_xor32(void);
+extern void safe_user_instruction(void);
+extern void sigreturn_stub(void);
+#endif
+#endif
+
+#define FIXED_CODE_START	0x400
+
+#define SIGRETURN_STUB		0x400
+
+#define ATOMIC_SEQS_START	0x410
+
+#define ATOMIC_XCHG32		0x410
+#define ATOMIC_CAS32		0x420
+#define ATOMIC_ADD32		0x430
+#define ATOMIC_SUB32		0x440
+#define ATOMIC_IOR32		0x450
+#define ATOMIC_AND32		0x460
+#define ATOMIC_XOR32		0x470
+
+#define ATOMIC_SEQS_END		0x480
+
+#define SAFE_USER_INSTRUCTION   0x480
+
+#define FIXED_CODE_END		0x490
+
+#endif
diff --git a/include/asm-blackfin/flat.h b/arch/blackfin/include/asm/flat.h
index e70074e05f4..e70074e05f4 100644
--- a/include/asm-blackfin/flat.h
+++ b/arch/blackfin/include/asm/flat.h
diff --git a/include/asm-blackfin/futex.h b/arch/blackfin/include/asm/futex.h
index 6a332a9f099..6a332a9f099 100644
--- a/include/asm-blackfin/futex.h
+++ b/arch/blackfin/include/asm/futex.h
diff --git a/include/asm-blackfin/gpio.h b/arch/blackfin/include/asm/gpio.h
index 168f1251eb4..ad33ac271fd 100644
--- a/include/asm-blackfin/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -224,7 +224,7 @@
 #endif
 
 #ifdef BF548_FAMILY
-#include <asm-blackfin/mach-bf548/gpio.h>
+#include <mach/gpio.h>
 #endif
 
 #ifdef BF561_FAMILY
diff --git a/include/asm-blackfin/gptimers.h b/arch/blackfin/include/asm/gptimers.h
index 0520d2aac8f..0520d2aac8f 100644
--- a/include/asm-blackfin/gptimers.h
+++ b/arch/blackfin/include/asm/gptimers.h
diff --git a/include/asm-blackfin/hardirq.h b/arch/blackfin/include/asm/hardirq.h
index b6b19f1b9da..b6b19f1b9da 100644
--- a/include/asm-blackfin/hardirq.h
+++ b/arch/blackfin/include/asm/hardirq.h
diff --git a/include/asm-blackfin/hw_irq.h b/arch/blackfin/include/asm/hw_irq.h
index 5b51eaec012..5b51eaec012 100644
--- a/include/asm-blackfin/hw_irq.h
+++ b/arch/blackfin/include/asm/hw_irq.h
diff --git a/include/asm-blackfin/io.h b/arch/blackfin/include/asm/io.h
index cbbf7ffdbbf..cbbf7ffdbbf 100644
--- a/include/asm-blackfin/io.h
+++ b/arch/blackfin/include/asm/io.h
diff --git a/include/asm-blackfin/ioctl.h b/arch/blackfin/include/asm/ioctl.h
index b279fe06dfe..b279fe06dfe 100644
--- a/include/asm-blackfin/ioctl.h
+++ b/arch/blackfin/include/asm/ioctl.h
diff --git a/include/asm-blackfin/ioctls.h b/arch/blackfin/include/asm/ioctls.h
index 895e3173165..895e3173165 100644
--- a/include/asm-blackfin/ioctls.h
+++ b/arch/blackfin/include/asm/ioctls.h
diff --git a/include/asm-blackfin/ipcbuf.h b/arch/blackfin/include/asm/ipcbuf.h
index 8f0899cdf4d..8f0899cdf4d 100644
--- a/include/asm-blackfin/ipcbuf.h
+++ b/arch/blackfin/include/asm/ipcbuf.h
diff --git a/include/asm-blackfin/irq.h b/arch/blackfin/include/asm/irq.h
index 86b67834354..89f59e18af9 100644
--- a/include/asm-blackfin/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -17,7 +17,7 @@
 #ifndef _BFIN_IRQ_H_
 #define _BFIN_IRQ_H_
 
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
 #include <asm/ptrace.h>
 
 /*******************************************************************************
@@ -34,7 +34,7 @@
  *   interrupts apart (just the TX/RX for the various devices)
  *******************************************************************************/
 
-/* SYS_IRQS and NR_IRQS are defined in <asm/mach-bf5xx/irq.h>*/
+/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/
 
 /*
  * Machine specific interrupt sources.
diff --git a/include/asm-blackfin/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h
index 139b5208f9d..139b5208f9d 100644
--- a/include/asm-blackfin/irq_handler.h
+++ b/arch/blackfin/include/asm/irq_handler.h
diff --git a/include/asm-blackfin/irq_regs.h b/arch/blackfin/include/asm/irq_regs.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-blackfin/irq_regs.h
+++ b/arch/blackfin/include/asm/irq_regs.h
diff --git a/include/asm-blackfin/kdebug.h b/arch/blackfin/include/asm/kdebug.h
index 6ece1b03766..6ece1b03766 100644
--- a/include/asm-blackfin/kdebug.h
+++ b/arch/blackfin/include/asm/kdebug.h
diff --git a/include/asm-blackfin/kgdb.h b/arch/blackfin/include/asm/kgdb.h
index 0f73847fd6b..0f73847fd6b 100644
--- a/include/asm-blackfin/kgdb.h
+++ b/arch/blackfin/include/asm/kgdb.h
diff --git a/include/asm-blackfin/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h
index e215f710497..e215f710497 100644
--- a/include/asm-blackfin/kmap_types.h
+++ b/arch/blackfin/include/asm/kmap_types.h
diff --git a/include/asm-blackfin/l1layout.h b/arch/blackfin/include/asm/l1layout.h
index c13ded77782..c13ded77782 100644
--- a/include/asm-blackfin/l1layout.h
+++ b/arch/blackfin/include/asm/l1layout.h
diff --git a/include/asm-blackfin/linkage.h b/arch/blackfin/include/asm/linkage.h
index 5a822bb790f..5a822bb790f 100644
--- a/include/asm-blackfin/linkage.h
+++ b/arch/blackfin/include/asm/linkage.h
diff --git a/include/asm-blackfin/local.h b/arch/blackfin/include/asm/local.h
index 75afffbc642..75afffbc642 100644
--- a/include/asm-blackfin/local.h
+++ b/arch/blackfin/include/asm/local.h
diff --git a/include/asm-blackfin/mem_map.h b/arch/blackfin/include/asm/mem_map.h
index 42d1f37f6d9..88d04a70770 100644
--- a/include/asm-blackfin/mem_map.h
+++ b/arch/blackfin/include/asm/mem_map.h
@@ -7,6 +7,6 @@
 #ifndef _MEM_MAP_H_
 #define _MEM_MAP_H_
 
-#include <asm/mach/mem_map.h>
+#include <mach/mem_map.h>
 
 #endif				/* _MEM_MAP_H_ */
diff --git a/include/asm-blackfin/mman.h b/arch/blackfin/include/asm/mman.h
index b58f5ad3f02..b58f5ad3f02 100644
--- a/include/asm-blackfin/mman.h
+++ b/arch/blackfin/include/asm/mman.h
diff --git a/include/asm-blackfin/mmu.h b/arch/blackfin/include/asm/mmu.h
index 757e43906ed..757e43906ed 100644
--- a/include/asm-blackfin/mmu.h
+++ b/arch/blackfin/include/asm/mmu.h
diff --git a/include/asm-blackfin/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index f55ec3c23a9..8529552a981 100644
--- a/include/asm-blackfin/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -173,8 +173,10 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr,
 
 static inline void update_protections(struct mm_struct *mm)
 {
-	flush_switched_cplbs();
-	set_mask_dcplbs(mm->context.page_rwx_mask);
+	if (mm->context.page_rwx_mask == current_rwx_mask) {
+		flush_switched_cplbs();
+		set_mask_dcplbs(mm->context.page_rwx_mask);
+	}
 }
 #endif
 
diff --git a/include/asm-blackfin/module.h b/arch/blackfin/include/asm/module.h
index e3128df139d..e3128df139d 100644
--- a/include/asm-blackfin/module.h
+++ b/arch/blackfin/include/asm/module.h
diff --git a/include/asm-blackfin/msgbuf.h b/arch/blackfin/include/asm/msgbuf.h
index 6fcbe8cd801..6fcbe8cd801 100644
--- a/include/asm-blackfin/msgbuf.h
+++ b/arch/blackfin/include/asm/msgbuf.h
diff --git a/include/asm-blackfin/mutex.h b/arch/blackfin/include/asm/mutex.h
index 458c1f7fbc1..458c1f7fbc1 100644
--- a/include/asm-blackfin/mutex.h
+++ b/arch/blackfin/include/asm/mutex.h
diff --git a/include/asm-blackfin/nand.h b/arch/blackfin/include/asm/nand.h
index afbaafa793f..afbaafa793f 100644
--- a/include/asm-blackfin/nand.h
+++ b/arch/blackfin/include/asm/nand.h
diff --git a/include/asm-blackfin/page.h b/arch/blackfin/include/asm/page.h
index 344f6a8c1f2..344f6a8c1f2 100644
--- a/include/asm-blackfin/page.h
+++ b/arch/blackfin/include/asm/page.h
diff --git a/include/asm-blackfin/page_offset.h b/arch/blackfin/include/asm/page_offset.h
index cbaff24b4b2..cbaff24b4b2 100644
--- a/include/asm-blackfin/page_offset.h
+++ b/arch/blackfin/include/asm/page_offset.h
diff --git a/include/asm-blackfin/param.h b/arch/blackfin/include/asm/param.h
index 41564a6347f..41564a6347f 100644
--- a/include/asm-blackfin/param.h
+++ b/arch/blackfin/include/asm/param.h
diff --git a/include/asm-blackfin/pci.h b/arch/blackfin/include/asm/pci.h
index 61277358c86..61277358c86 100644
--- a/include/asm-blackfin/pci.h
+++ b/arch/blackfin/include/asm/pci.h
diff --git a/include/asm-blackfin/percpu.h b/arch/blackfin/include/asm/percpu.h
index 78dd61f6b39..78dd61f6b39 100644
--- a/include/asm-blackfin/percpu.h
+++ b/arch/blackfin/include/asm/percpu.h
diff --git a/include/asm-blackfin/pgalloc.h b/arch/blackfin/include/asm/pgalloc.h
index c686e0542fd..c686e0542fd 100644
--- a/include/asm-blackfin/pgalloc.h
+++ b/arch/blackfin/include/asm/pgalloc.h
diff --git a/include/asm-blackfin/pgtable.h b/arch/blackfin/include/asm/pgtable.h
index b11b114689c..f11684e4ade 100644
--- a/include/asm-blackfin/pgtable.h
+++ b/arch/blackfin/include/asm/pgtable.h
@@ -4,7 +4,7 @@
 #include <asm-generic/4level-fixup.h>
 
 #include <asm/page.h>
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 typedef pte_t *pte_addr_t;
 /*
diff --git a/include/asm-blackfin/poll.h b/arch/blackfin/include/asm/poll.h
index 94cc2636e0e..94cc2636e0e 100644
--- a/include/asm-blackfin/poll.h
+++ b/arch/blackfin/include/asm/poll.h
diff --git a/include/asm-blackfin/portmux.h b/arch/blackfin/include/asm/portmux.h
index 0807b286cd9..88eb5c07cc2 100644
--- a/include/asm-blackfin/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -21,7 +21,7 @@ int peripheral_request_list(const unsigned short per[], const char *label);
 void peripheral_free_list(const unsigned short per[]);
 
 #include <asm/gpio.h>
-#include <asm/mach/portmux.h>
+#include <mach/portmux.h>
 
 #ifndef P_SPORT2_TFS
 #define P_SPORT2_TFS P_UNDEF
diff --git a/include/asm-blackfin/posix_types.h b/arch/blackfin/include/asm/posix_types.h
index 23aa1f8c1bd..23aa1f8c1bd 100644
--- a/include/asm-blackfin/posix_types.h
+++ b/arch/blackfin/include/asm/posix_types.h
diff --git a/include/asm-blackfin/processor.h b/arch/blackfin/include/asm/processor.h
index 6f3995b119d..6f3995b119d 100644
--- a/include/asm-blackfin/processor.h
+++ b/arch/blackfin/include/asm/processor.h
diff --git a/include/asm-blackfin/ptrace.h b/arch/blackfin/include/asm/ptrace.h
index a45a80e54ad..a45a80e54ad 100644
--- a/include/asm-blackfin/ptrace.h
+++ b/arch/blackfin/include/asm/ptrace.h
diff --git a/include/asm-blackfin/reboot.h b/arch/blackfin/include/asm/reboot.h
index 6d448b5f598..6d448b5f598 100644
--- a/include/asm-blackfin/reboot.h
+++ b/arch/blackfin/include/asm/reboot.h
diff --git a/include/asm-blackfin/resource.h b/arch/blackfin/include/asm/resource.h
index 091355ab349..091355ab349 100644
--- a/include/asm-blackfin/resource.h
+++ b/arch/blackfin/include/asm/resource.h
diff --git a/include/asm-blackfin/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h
index 04f448711cd..04f448711cd 100644
--- a/include/asm-blackfin/scatterlist.h
+++ b/arch/blackfin/include/asm/scatterlist.h
diff --git a/include/asm-blackfin/sections.h b/arch/blackfin/include/asm/sections.h
index 1443c3353a8..1443c3353a8 100644
--- a/include/asm-blackfin/sections.h
+++ b/arch/blackfin/include/asm/sections.h
diff --git a/include/asm-blackfin/segment.h b/arch/blackfin/include/asm/segment.h
index 02cfd09b5a9..02cfd09b5a9 100644
--- a/include/asm-blackfin/segment.h
+++ b/arch/blackfin/include/asm/segment.h
diff --git a/include/asm-blackfin/sembuf.h b/arch/blackfin/include/asm/sembuf.h
index 18deb5c7fa5..18deb5c7fa5 100644
--- a/include/asm-blackfin/sembuf.h
+++ b/arch/blackfin/include/asm/sembuf.h
diff --git a/include/asm-blackfin/serial.h b/arch/blackfin/include/asm/serial.h
index 994dd869558..994dd869558 100644
--- a/include/asm-blackfin/serial.h
+++ b/arch/blackfin/include/asm/serial.h
diff --git a/include/asm-blackfin/setup.h b/arch/blackfin/include/asm/setup.h
index 01c8c6cbe6f..01c8c6cbe6f 100644
--- a/include/asm-blackfin/setup.h
+++ b/arch/blackfin/include/asm/setup.h
diff --git a/include/asm-blackfin/shmbuf.h b/arch/blackfin/include/asm/shmbuf.h
index 612436303e8..612436303e8 100644
--- a/include/asm-blackfin/shmbuf.h
+++ b/arch/blackfin/include/asm/shmbuf.h
diff --git a/include/asm-blackfin/shmparam.h b/arch/blackfin/include/asm/shmparam.h
index 3c03906b766..3c03906b766 100644
--- a/include/asm-blackfin/shmparam.h
+++ b/arch/blackfin/include/asm/shmparam.h
diff --git a/include/asm-blackfin/sigcontext.h b/arch/blackfin/include/asm/sigcontext.h
index ce00b03c277..ce00b03c277 100644
--- a/include/asm-blackfin/sigcontext.h
+++ b/arch/blackfin/include/asm/sigcontext.h
diff --git a/include/asm-blackfin/siginfo.h b/arch/blackfin/include/asm/siginfo.h
index eca4565cea3..eca4565cea3 100644
--- a/include/asm-blackfin/siginfo.h
+++ b/arch/blackfin/include/asm/siginfo.h
diff --git a/include/asm-blackfin/signal.h b/arch/blackfin/include/asm/signal.h
index 87951d25145..87951d25145 100644
--- a/include/asm-blackfin/signal.h
+++ b/arch/blackfin/include/asm/signal.h
diff --git a/include/asm-blackfin/socket.h b/arch/blackfin/include/asm/socket.h
index 2ca702e44d4..2ca702e44d4 100644
--- a/include/asm-blackfin/socket.h
+++ b/arch/blackfin/include/asm/socket.h
diff --git a/include/asm-blackfin/sockios.h b/arch/blackfin/include/asm/sockios.h
index 426b89bfaa8..426b89bfaa8 100644
--- a/include/asm-blackfin/sockios.h
+++ b/arch/blackfin/include/asm/sockios.h
diff --git a/include/asm-blackfin/spinlock.h b/arch/blackfin/include/asm/spinlock.h
index 64e908a5064..64e908a5064 100644
--- a/include/asm-blackfin/spinlock.h
+++ b/arch/blackfin/include/asm/spinlock.h
diff --git a/include/asm-blackfin/stat.h b/arch/blackfin/include/asm/stat.h
index d2b6f11ec23..d2b6f11ec23 100644
--- a/include/asm-blackfin/stat.h
+++ b/arch/blackfin/include/asm/stat.h
diff --git a/include/asm-blackfin/statfs.h b/arch/blackfin/include/asm/statfs.h
index 350672091ba..350672091ba 100644
--- a/include/asm-blackfin/statfs.h
+++ b/arch/blackfin/include/asm/statfs.h
diff --git a/include/asm-blackfin/string.h b/arch/blackfin/include/asm/string.h
index 321f4d96e4a..321f4d96e4a 100644
--- a/include/asm-blackfin/string.h
+++ b/arch/blackfin/include/asm/string.h
diff --git a/include/asm-blackfin/system.h b/arch/blackfin/include/asm/system.h
index 51494ef5bb4..8f1627d8bf0 100644
--- a/include/asm-blackfin/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -36,7 +36,7 @@
 
 #include <linux/linkage.h>
 #include <linux/compiler.h>
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 /*
  * Interrupt configuring macros.
diff --git a/include/asm-blackfin/termbits.h b/arch/blackfin/include/asm/termbits.h
index f37feb7cf89..f37feb7cf89 100644
--- a/include/asm-blackfin/termbits.h
+++ b/arch/blackfin/include/asm/termbits.h
diff --git a/include/asm-blackfin/termios.h b/arch/blackfin/include/asm/termios.h
index d50d063c605..d50d063c605 100644
--- a/include/asm-blackfin/termios.h
+++ b/arch/blackfin/include/asm/termios.h
diff --git a/include/asm-blackfin/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 642769329d1..642769329d1 100644
--- a/include/asm-blackfin/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
diff --git a/include/asm-blackfin/time.h b/arch/blackfin/include/asm/time.h
index ddc43ce3853..ddc43ce3853 100644
--- a/include/asm-blackfin/time.h
+++ b/arch/blackfin/include/asm/time.h
diff --git a/include/asm-blackfin/timex.h b/arch/blackfin/include/asm/timex.h
index 22b0806161b..22b0806161b 100644
--- a/include/asm-blackfin/timex.h
+++ b/arch/blackfin/include/asm/timex.h
diff --git a/include/asm-blackfin/tlb.h b/arch/blackfin/include/asm/tlb.h
index 89a12ee916d..89a12ee916d 100644
--- a/include/asm-blackfin/tlb.h
+++ b/arch/blackfin/include/asm/tlb.h
diff --git a/include/asm-blackfin/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h
index 277b400924b..277b400924b 100644
--- a/include/asm-blackfin/tlbflush.h
+++ b/arch/blackfin/include/asm/tlbflush.h
diff --git a/include/asm-blackfin/topology.h b/arch/blackfin/include/asm/topology.h
index acee2398789..acee2398789 100644
--- a/include/asm-blackfin/topology.h
+++ b/arch/blackfin/include/asm/topology.h
diff --git a/include/asm-blackfin/trace.h b/arch/blackfin/include/asm/trace.h
index 312b596b973..312b596b973 100644
--- a/include/asm-blackfin/trace.h
+++ b/arch/blackfin/include/asm/trace.h
diff --git a/include/asm-blackfin/traps.h b/arch/blackfin/include/asm/traps.h
index f0e5f940d9c..f0e5f940d9c 100644
--- a/include/asm-blackfin/traps.h
+++ b/arch/blackfin/include/asm/traps.h
diff --git a/include/asm-blackfin/types.h b/arch/blackfin/include/asm/types.h
index 8441cbc2bf9..8441cbc2bf9 100644
--- a/include/asm-blackfin/types.h
+++ b/arch/blackfin/include/asm/types.h
diff --git a/include/asm-blackfin/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index d928b809905..d928b809905 100644
--- a/include/asm-blackfin/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
diff --git a/include/asm-blackfin/ucontext.h b/arch/blackfin/include/asm/ucontext.h
index 4a4e3856beb..4a4e3856beb 100644
--- a/include/asm-blackfin/ucontext.h
+++ b/arch/blackfin/include/asm/ucontext.h
diff --git a/include/asm-blackfin/unaligned.h b/arch/blackfin/include/asm/unaligned.h
index fd8a1d63494..fd8a1d63494 100644
--- a/include/asm-blackfin/unaligned.h
+++ b/arch/blackfin/include/asm/unaligned.h
diff --git a/include/asm-blackfin/unistd.h b/arch/blackfin/include/asm/unistd.h
index 42955d0c439..1e57b636e0b 100644
--- a/include/asm-blackfin/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -372,8 +372,14 @@
 #define __NR_semtimedop		357
 #define __NR_timerfd_settime	358
 #define __NR_timerfd_gettime	359
+#define __NR_signalfd4		360
+#define __NR_eventfd2		361
+#define __NR_epoll_create1	362
+#define __NR_dup3		363
+#define __NR_pipe2		364
+#define __NR_inotify_init1	365
 
-#define __NR_syscall		360
+#define __NR_syscall		366
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */
diff --git a/include/asm-blackfin/user.h b/arch/blackfin/include/asm/user.h
index afe6a0e1f7c..afe6a0e1f7c 100644
--- a/include/asm-blackfin/user.h
+++ b/arch/blackfin/include/asm/user.h
diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
index 9eecfa40318..a8b712a24c5 100644
--- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
@@ -25,7 +25,7 @@
 #include <asm/cplbinit.h>
 
 #if defined(CONFIG_BFIN_ICACHE)
-void bfin_icache_init(void)
+void __init bfin_icache_init(void)
 {
 	unsigned long ctrl;
 	int i;
@@ -43,7 +43,7 @@ void bfin_icache_init(void)
 #endif
 
 #if defined(CONFIG_BFIN_DCACHE)
-void bfin_dcache_init(void)
+void __init bfin_dcache_init(void)
 {
 	unsigned long ctrl;
 	int i;
diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
index 8a18399f607..bd0831592c2 100644
--- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
@@ -25,7 +25,7 @@
 #include <asm/cplbinit.h>
 
 #if defined(CONFIG_BFIN_ICACHE)
-void bfin_icache_init(void)
+void __init bfin_icache_init(void)
 {
 	unsigned long *table = icplb_table;
 	unsigned long ctrl;
@@ -47,7 +47,7 @@ void bfin_icache_init(void)
 #endif
 
 #if defined(CONFIG_BFIN_DCACHE)
-void bfin_dcache_init(void)
+void __init bfin_dcache_init(void)
 {
 	unsigned long *table = dcplb_table;
 	unsigned long ctrl;
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 224e7cc30bc..728f708d398 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -164,17 +164,13 @@ static struct cplb_desc cplb_data[] = {
 		.name = "Asynchronous Memory Banks",
 	},
 	{
-#ifdef L2_START
 		.start = L2_START,
 		.end = L2_START + L2_LENGTH,
 		.psize = SIZE_1M,
 		.attr = SWITCH_T | I_CPLB | D_CPLB,
 		.i_conf = L2_MEMORY,
 		.d_conf = L2_MEMORY,
-		.valid = 1,
-#else
-		.valid = 0,
-#endif
+		.valid = (L2_LENGTH > 0),
 		.name = "L2 Memory",
 	},
 	{
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 31bd9bf3efa..faea88ebb2e 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -32,7 +32,7 @@
 #include <asm/errno.h>
 #include <asm/asm-offsets.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 #ifdef CONFIG_EXCPT_IRQ_SYSC_L1
 .section .l1.text
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 23e637eb78d..7a82d10b4eb 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -52,6 +52,7 @@ EXPORT_SYMBOL(mtd_size);
 #endif
 
 char __initdata command_line[COMMAND_LINE_SIZE];
+unsigned int __initdata *__retx;
 
 /* boot memmap, for parsing "memmap=" */
 #define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
@@ -131,14 +132,14 @@ void __init bf53x_relocate_l1_mem(void)
 	dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 			l1_data_a_length, l1_data_b_length);
 
-#ifdef L2_LENGTH
-	l2_length = _ebss_l2 - _stext_l2;
-	if (l2_length > L2_LENGTH)
-		panic("L2 SRAM Overflow\n");
+	if (L2_LENGTH != 0) {
+		l2_length = _ebss_l2 - _stext_l2;
+		if (l2_length > L2_LENGTH)
+			panic("L2 SRAM Overflow\n");
 
-	/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
-	dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
-#endif
+		/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
+		dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+	}
 }
 
 /* add_memory_region to memmap */
@@ -738,6 +739,16 @@ void __init setup_arch(char **cmdline_p)
 
 	memory_setup();
 
+	/* Initialize Async memory banks */
+	bfin_write_EBIU_AMBCTL0(AMBCTL0VAL);
+	bfin_write_EBIU_AMBCTL1(AMBCTL1VAL);
+	bfin_write_EBIU_AMGCTL(AMGCTLVAL);
+#ifdef CONFIG_EBIU_MBSCTLVAL
+	bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL);
+	bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
+	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
+#endif
+
 	cclk = get_cclk();
 	sclk = get_sclk();
 
@@ -775,7 +786,11 @@ void __init setup_arch(char **cmdline_p)
 	bfin_write_SWRST(DOUBLE_FAULT);
 
 	if (_bfin_swrst & RESET_DOUBLE)
-		printk(KERN_INFO "Recovering from Double Fault event\n");
+		/*
+		 * don't decode the address, since you don't know if this
+		 * kernel's symbol map is the same as the crashing kernel
+		 */
+		printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx);
 	else if (_bfin_swrst & RESET_WDOG)
 		printk(KERN_INFO "Recovering from Watchdog event\n");
 	else if (_bfin_swrst & RESET_SOFTWARE)
@@ -1049,7 +1064,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		   dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
 		   BFIN_DLINES);
 #ifdef CONFIG_BFIN_ICACHE_LOCK
-	switch (read_iloc()) {
+	switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) {
 	case WAY0_L:
 		seq_printf(m, "Way0 Locked-Down\n");
 		break;
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index ad922ab9154..9a9d5083acf 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -567,7 +567,7 @@ bool get_instruction(unsigned short *val, unsigned short *address)
 	 * we don't read something in the async space that can hang forever
 	 */
 	if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
-#ifdef L2_START
+#if L2_LENGTH != 0
 	    (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
 #endif
 	    (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
@@ -601,12 +601,55 @@ bool get_instruction(unsigned short *val, unsigned short *address)
 	return false;
 }
 
+/* 
+ * decode the instruction if we are printing out the trace, as it
+ * makes things easier to follow, without running it through objdump
+ * These are the normal instructions which cause change of flow, which
+ * would be at the source of the trace buffer
+ */
+void decode_instruction(unsigned short *address)
+{
+	unsigned short opcode;
+
+	if (get_instruction(&opcode, address)) {
+		if (opcode == 0x0010)
+			printk("RTS");
+		else if (opcode == 0x0011)
+			printk("RTI");
+		else if (opcode == 0x0012)
+			printk("RTX");
+		else if (opcode >= 0x0050 && opcode <= 0x0057)
+			printk("JUMP (P%i)", opcode & 7);
+		else if (opcode >= 0x0060 && opcode <= 0x0067)
+			printk("CALL (P%i)", opcode & 7);
+		else if (opcode >= 0x0070 && opcode <= 0x0077)
+			printk("CALL (PC+P%i)", opcode & 7);
+		else if (opcode >= 0x0080 && opcode <= 0x0087)
+			printk("JUMP (PC+P%i)", opcode & 7);
+		else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
+			printk("IF !CC JUMP");
+		else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
+			printk("IF CC JUMP");
+		else if (opcode >= 0x2000 && opcode <= 0x2fff)
+			printk("JUMP.S");
+		else if (opcode >= 0xe080 && opcode <= 0xe0ff)
+			printk("LSETUP");
+		else if (opcode >= 0xe200 && opcode <= 0xe2ff)
+			printk("JUMP.L");
+		else if (opcode >= 0xe300 && opcode <= 0xe3ff)
+			printk("CALL pcrel");
+		else
+			printk("0x%04x", opcode);
+	}
+
+}
+
 void dump_bfin_trace_buffer(void)
 {
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int tflags, i = 0;
 	char buf[150];
-	unsigned short val = 0, *addr;
+	unsigned short *addr;
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
 	int j, index;
 #endif
@@ -615,6 +658,10 @@ void dump_bfin_trace_buffer(void)
 
 	printk(KERN_NOTICE "Hardware Trace:\n");
 
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
+#endif
+
 	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
 		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
 			decode_address(buf, (unsigned long)bfin_read_TBUF());
@@ -622,45 +669,14 @@ void dump_bfin_trace_buffer(void)
 			addr = (unsigned short *)bfin_read_TBUF();
 			decode_address(buf, (unsigned long)addr);
 			printk(KERN_NOTICE "     Source : %s ", buf);
-			if (get_instruction(&val, addr)) {
-				if (val == 0x0010)
-					printk("RTS");
-				else if (val == 0x0011)
-					printk("RTI");
-				else if (val == 0x0012)
-					printk("RTX");
-				else if (val >= 0x0050 && val <= 0x0057)
-					printk("JUMP (P%i)", val & 7);
-				else if (val >= 0x0060 && val <= 0x0067)
-					printk("CALL (P%i)", val & 7);
-				else if (val >= 0x0070 && val <= 0x0077)
-					printk("CALL (PC+P%i)", val & 7);
-				else if (val >= 0x0080 && val <= 0x0087)
-					printk("JUMP (PC+P%i)", val & 7);
-				else if ((val >= 0x1000 && val <= 0x13FF) ||
-				    (val >= 0x1800 && val <= 0x1BFF))
-					printk("IF !CC JUMP");
-				else if ((val >= 0x1400 && val <= 0x17ff) ||
-				    (val >= 0x1c00 && val <= 0x1fff))
-					printk("IF CC JUMP");
-				else if (val >= 0x2000 && val <= 0x2fff)
-					printk("JUMP.S");
-				else if (val >= 0xe080 && val <= 0xe0ff)
-					printk("LSETUP");
-				else if (val >= 0xe200 && val <= 0xe2ff)
-					printk("JUMP.L");
-				else if (val >= 0xe300 && val <= 0xe3ff)
-					printk("CALL pcrel");
-				else
-					printk("0x%04x", val);
-			}
+			decode_instruction(addr);
 			printk("\n");
 		}
 	}
 
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
 	if (trace_buff_offset)
-		index = trace_buff_offset/4 - 1;
+		index = trace_buff_offset / 4;
 	else
 		index = EXPAND_LEN;
 
@@ -672,7 +688,9 @@ void dump_bfin_trace_buffer(void)
 		if (index < 0 )
 			index = EXPAND_LEN;
 		decode_address(buf, software_trace_buff[index]);
-		printk(KERN_NOTICE "     Source : %s\n", buf);
+		printk(KERN_NOTICE "     Source : %s ", buf);
+		decode_instruction((unsigned short *)software_trace_buff[index]);
+		printk("\n");
 		index -= 1;
 		if (index < 0)
 			index = EXPAND_LEN;
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 0896e38d610..7d12c6692a6 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -83,6 +83,7 @@ SECTIONS
 #if !L1_DATA_B_LENGTH
 		*(.l1.bss.B)
 #endif
+		. = ALIGN(4);
 		___bss_stop = .;
 	}
 
@@ -101,7 +102,7 @@ SECTIONS
 #if !L1_DATA_B_LENGTH
 		*(.l1.data.B)
 #endif
-#ifndef L2_LENGTH
+#if !L2_LENGTH
 		. = ALIGN(32);
 		*(.data_l2.cacheline_aligned)
 		*(.l2.data)
@@ -211,20 +212,19 @@ SECTIONS
 		__ebss_b_l1 = .;
 	}
 
-#ifdef L2_LENGTH
 	__l2_lma_start = .;
 
 	.text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
 	{
 		. = ALIGN(4);
 		__stext_l2 = .;
-		*(.l1.text)
+		*(.l2.text)
 		. = ALIGN(4);
 		__etext_l2 = .;
 
 		. = ALIGN(4);
 		__sdata_l2 = .;
-		*(.l1.data)
+		*(.l2.data)
 		__edata_l2 = .;
 
 		. = ALIGN(32);
@@ -232,11 +232,10 @@ SECTIONS
 
 		. = ALIGN(4);
 		__sbss_l2 = .;
-		*(.l1.bss)
+		*(.l2.bss)
 		. = ALIGN(4);
 		__ebss_l2 = .;
 	}
-#endif
 
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
index eba2343b1b5..d60554dce87 100644
--- a/arch/blackfin/lib/ins.S
+++ b/arch/blackfin/lib/ins.S
@@ -33,7 +33,28 @@
 
 .align 2
 
+/*
+ * Reads on the Blackfin are speculative. In Blackfin terms, this means they
+ * can be interrupted at any time (even after they have been issued on to the
+ * external bus), and re-issued after the interrupt occurs.
+ *
+ * If a FIFO is sitting on the end of the read, it will see two reads,
+ * when the core only sees one. The FIFO receives the read which is cancelled,
+ * and not delivered to the core.
+ *
+ * To solve this, interrupts are turned off before reads occur to I/O space.
+ * There are 3 versions of all these functions
+ *  - turns interrupts off every read (higher overhead, but lower latency)
+ *  - turns interrupts off every loop (low overhead, but longer latency)
+ *  - DMA version, which do not suffer from this issue. DMA versions have
+ *      different name (prefixed by dma_ ), and are located in
+ *      ../kernel/bfin_dma_5xx.c
+ * Using the dma related functions are recommended for transfering large
+ * buffers in/out of FIFOs.
+ */
+
 ENTRY(_insl)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -46,9 +67,26 @@ ENTRY(_insl)
 .Llong_loop_e: 	NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = [P0];
+	[P1++] = R0;
+.Llong_loop_e:
+	STI R3;
+
+	RTS;
+#endif
 ENDPROC(_insl)
 
 ENTRY(_insw)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -61,9 +99,26 @@ ENTRY(_insw)
 .Lword_loop_e: 	NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = W[P0];
+	W[P1++] = R0;
+.Lword_loop_e:
+	STI R3;
+	RTS;
+
+#endif
 ENDPROC(_insw)
 
 ENTRY(_insw_8)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -78,9 +133,29 @@ ENTRY(_insw_8)
 .Lword8_loop_e: NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = W[P0];
+	B[P1++] = R0;
+	R0 = R0 >> 8;
+	B[P1++] = R0;
+	NOP;
+.Lword8_loop_e:
+	STI R3;
+
+	RTS;
+#endif
 ENDPROC(_insw_8)
 
 ENTRY(_insb)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -93,9 +168,26 @@ ENTRY(_insb)
 .Lbyte_loop_e:  NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;        /* P0 = port */
+	P1 = R1;        /* P1 = address */
+	P2 = R2;        /* P2 = count */
+	SSYNC;
+	LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = B[P0];
+	B[P1++] = R0;
+.Lbyte_loop_e:
+	STI R3;
+
+	RTS;
+#endif
 ENDPROC(_insb)
 
 ENTRY(_insl_16)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -110,4 +202,21 @@ ENTRY(_insl_16)
 .Llong16_loop_e:  NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2;
+.Llong16_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = [P0];
+	W[P1++] = R0;
+	R0 = R0 >> 16;
+	W[P1++] = R0;
+.Llong16_loop_e:
+	STI R3;
+	RTS;
+#endif
 ENDPROC(_insl_16)
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 0b26ae2de5e..d22bc777371 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -39,7 +39,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/pata_platform.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -160,15 +159,15 @@ static struct platform_device musb_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0x1C0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = MTDPART_OFS_APPEND,
 	}
@@ -200,12 +199,12 @@ static struct platform_device ezkit_flash_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "Linux Kernel",
+		.name = "linux kernel(nand)",
 		.offset = 0,
 		.size = 4 * SIZE_1M,
 	},
 	{
-		.name = "File System",
+		.name = "file system(nand)",
 		.offset = MTDPART_OFS_APPEND,
 		.size = MTDPART_SIZ_FULL,
 	},
@@ -438,12 +437,12 @@ static struct platform_device net2272_bfin_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel",
+		.name = "linux kernel(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -799,43 +798,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -961,10 +923,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -987,10 +945,6 @@ static int __init stamp_init(void)
 
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 689b69c98ee..762f754c06c 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -177,15 +176,15 @@ static struct platform_device bf52x_t350mcqb_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0x1C0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = MTDPART_OFS_APPEND,
 	}
@@ -217,12 +216,12 @@ static struct platform_device ezkit_flash_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "Linux Kernel",
+		.name = "linux kernel(nand)",
 		.offset = 0,
 		.size = 4 * SIZE_1M,
 	},
 	{
-		.name = "File System",
+		.name = "file system(nand)",
 		.offset = MTDPART_OFS_APPEND,
 		.size = MTDPART_SIZ_FULL,
 	},
@@ -460,12 +459,12 @@ static struct platform_device net2272_bfin_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel",
+		.name = "linux kernel(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -825,43 +824,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -996,10 +958,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -1022,10 +980,6 @@ static int __init stamp_init(void)
 
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S
index fe05cc1ef17..28c48619120 100644
--- a/arch/blackfin/mach-bf527/head.S
+++ b/arch/blackfin/mach-bf527/head.S
@@ -30,292 +30,10 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-
-#if defined(CONFIG_BF527)
-	p0.h = hi(EMAC_SYSTAT);
-	p0.l = lo(EMAC_SYSTAT);
-	R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
-	R0.l = 0xFFFF;
-	[P0] = R0;
-	SSYNC;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(UART1_LCR);
-	p0.l = lo(UART1_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(UART1_DLL);
-	p0.l = lo(UART1_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(UART1_DLH);
-	p0.l = lo(UART1_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(UART1_GCTL);
-	p0.l = lo(UART1_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
 
 .section .l1.text
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
@@ -420,13 +138,6 @@ ENTRY(_start_dma_code)
 	[P2] = R1;
 	SSYNC;
 
-	p0.h = hi(SIC_IWR0);
-	p0.l = lo(SIC_IWR0);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index b7b166f4f06..b7b166f4f06 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf527/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
index 056eb4b9cd2..056eb4b9cd2 100644
--- a/include/asm-blackfin/mach-bf527/bf527.h
+++ b/arch/blackfin/mach-bf527/include/mach/bf527.h
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 2526b6ed6fa..2526b6ed6fa 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
diff --git a/include/asm-blackfin/mach-bf527/bfin_sir.h b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
index cfd8ad4f1f2..cfd8ad4f1f2 100644
--- a/include/asm-blackfin/mach-bf527/bfin_sir.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
diff --git a/include/asm-blackfin/mach-bf527/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index 297821e2d79..297821e2d79 100644
--- a/include/asm-blackfin/mach-bf527/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf527/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
index 52c06494b88..663c2bbdfd9 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
@@ -36,7 +36,7 @@
 #include "defBF522.h"
 
 /* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */
 
diff --git a/include/asm-blackfin/mach-bf527/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
index 2cc67e4b4d8..00377eb59b7 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
@@ -36,7 +36,7 @@
 #include "defBF525.h"
 
 /* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
 
diff --git a/include/asm-blackfin/mach-bf527/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
index 5bd1a860174..fca8db70811 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
@@ -36,7 +36,7 @@
 #include "defBF527.h"
 
 /* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
 
diff --git a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 9dbdbec8ea1..9a814b9a12b 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -37,7 +37,7 @@
 #include "defBF52x_base.h"
 
 /* Include core specific register pointer definitions 								*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* ==== begin from cdefBF534.h ==== */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h
index 9671d8f2c5e..0a8cdcdf0b4 100644
--- a/include/asm-blackfin/mach-bf527/defBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h
@@ -32,7 +32,7 @@
 #define _DEF_BF522_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
index 6a375a084ac..5cd7576fef7 100644
--- a/include/asm-blackfin/mach-bf527/defBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -32,7 +32,7 @@
 #define _DEF_BF525_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
index f1a70db70cb..f040f364afa 100644
--- a/include/asm-blackfin/mach-bf527/defBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -32,7 +32,7 @@
 #define _DEF_BF527_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index fc69cf93f14..6ac2ed7026e 100644
--- a/include/asm-blackfin/mach-bf527/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -151,7 +151,7 @@
 #define TIMER7_CONFIG		0xFFC00670	/* Timer 7 Configuration Register  			*/
 #define TIMER7_COUNTER		0xFFC00674	/* Timer 7 Counter Register        			*/
 #define TIMER7_PERIOD		0xFFC00678	/* Timer 7 Period Register         			*/
-#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register       			*/   
+#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register       			*/
 
 #define TIMER_ENABLE		0xFFC00680	/* Timer Enable Register					*/
 #define TIMER_DISABLE		0xFFC00684	/* Timer Disable Register					*/
@@ -634,18 +634,9 @@
 /* PLL_DIV Macros														*/
 #define SET_SSEL(x)		((x)&0xF)		/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
 
-/* VR_CTL Masks																	*/
-#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
+/* VR_CTL Masks	*/
+#define	FREQ			0x3000	/* Switching Oscillator Frequency For Regulator	*/
 #define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
-#define	FREQ_333		0x0001	/* 		Switching Frequency Is 333 kHz			*/
-#define	FREQ_667		0x0002	/* 		Switching Frequency Is 667 kHz			*/
-#define	FREQ_1000		0x0003	/* 		Switching Frequency Is 1 MHz			*/
-
-#define GAIN			0x000C	/* Voltage Level Gain	*/
-#define	GAIN_5			0x0000	/* 		GAIN = 5		*/
-#define	GAIN_10			0x0004	/* 		GAIN = 10		*/
-#define	GAIN_20			0x0008	/* 		GAIN = 20		*/
-#define	GAIN_50			0x000C	/* 		GAIN = 50		*/
 
 #define	VLEV			0x00F0	/* Internal Voltage Level					*/
 #define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
@@ -660,7 +651,7 @@
 #define	VLEV_130		0x00F0	/* 		VLEV = 1.30 V (-5% - +10% Accuracy)	*/
 
 #define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
-#define	CANWE			0x0200	/* Enable CAN Wakeup From Hibernate			*/
+#define	USBWE			0x0200	/* Enable USB Wakeup From Hibernate			*/
 #define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
 #define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
 #define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
@@ -697,16 +688,16 @@
 
 #define IRQ_ERROR1      0x00000002  /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
 #define IRQ_ERROR2      0x00000004  /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
-#define IRQ_RTC			0x00000008	/* Real Time Clock Interrupt 						*/ 
-#define IRQ_DMA0		0x00000010	/* DMA Channel 0 (PPI) Interrupt 					*/ 
-#define IRQ_DMA3		0x00000020	/* DMA Channel 3 (SPORT0 RX) Interrupt 				*/ 
+#define IRQ_RTC			0x00000008	/* Real Time Clock Interrupt 						*/
+#define IRQ_DMA0		0x00000010	/* DMA Channel 0 (PPI) Interrupt 					*/
+#define IRQ_DMA3		0x00000020	/* DMA Channel 3 (SPORT0 RX) Interrupt 				*/
 #define IRQ_DMA4		0x00000040	/* DMA Channel 4 (SPORT0 TX) Interrupt 				*/
 #define IRQ_DMA5		0x00000080	/* DMA Channel 5 (SPORT1 RX) Interrupt 				*/
 
 #define IRQ_DMA6		0x00000100	/* DMA Channel 6 (SPORT1 TX) Interrupt 		 		*/
 #define IRQ_TWI			0x00000200	/* TWI Interrupt									*/
 #define IRQ_DMA7		0x00000400	/* DMA Channel 7 (SPI) Interrupt 					*/
-#define IRQ_DMA8		0x00000800	/* DMA Channel 8 (UART0 RX) Interrupt 				*/ 
+#define IRQ_DMA8		0x00000800	/* DMA Channel 8 (UART0 RX) Interrupt 				*/
 #define IRQ_DMA9		0x00001000	/* DMA Channel 9 (UART0 TX) Interrupt 				*/
 #define IRQ_DMA10		0x00002000	/* DMA Channel 10 (UART1 RX) Interrupt 				*/
 #define IRQ_DMA11		0x00004000	/* DMA Channel 11 (UART1 TX) Interrupt 				*/
@@ -801,7 +792,7 @@
 #define WDEV_NONE 0x0006 /* no event on roll over */
 #define WDEN 0x0FF0 /* enable watchdog */
 #define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */ 
+#define WDRO 0x8000 /* watchdog rolled over latch */
 
 /* depreciated WDOG_CTL Register Masks for legacy code */
 
@@ -882,7 +873,7 @@
 #define NINT		0x01		/* Pending Interrupt					*/
 #define IIR_TX_READY    0x02		/* UART_THR empty                               */
 #define IIR_RX_READY    0x04		/* Receive data ready                           */
-#define IIR_LINE_CHANGE 0x06		/* Receive line status    			*/ 
+#define IIR_LINE_CHANGE 0x06		/* Receive line status    			*/
 #define IIR_STATUS	0x06		/* Highest Priority Pending Interrupt	*/
 
 /* UARTx_GCTL Masks													*/
@@ -1638,12 +1629,12 @@
 
 /* entry addresses of the user-callable Boot ROM functions */
 
-#define _BOOTROM_RESET 0xEF000000 
-#define _BOOTROM_FINAL_INIT 0xEF000002 
+#define _BOOTROM_RESET 0xEF000000
+#define _BOOTROM_FINAL_INIT 0xEF000002
 #define _BOOTROM_DO_MEMORY_DMA 0xEF000006
-#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 
-#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A 
-#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C 
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
 #define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
 #define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
 #define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
@@ -1771,71 +1762,71 @@
 /* Bit masks for CNT_CONFIG */
 
 #define                      CNTE  0x1        /* Counter Enable */
-#define                     nCNTE  0x0       
+#define                     nCNTE  0x0
 #define                      DEBE  0x2        /* Debounce Enable */
-#define                     nDEBE  0x0       
+#define                     nDEBE  0x0
 #define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                   nCDGINV  0x0       
+#define                   nCDGINV  0x0
 #define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                   nCUDINV  0x0       
+#define                   nCUDINV  0x0
 #define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   nCZMINV  0x0       
+#define                   nCZMINV  0x0
 #define                   CNTMODE  0x700      /* Counter Operating Mode */
 #define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                     nZMZC  0x0       
+#define                     nZMZC  0x0
 #define                   BNDMODE  0x3000     /* Boundary register Mode */
 #define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-#define                   nINPDIS  0x0       
+#define                   nINPDIS  0x0
 
 /* Bit masks for CNT_IMASK */
 
 #define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                     nICIE  0x0       
+#define                     nICIE  0x0
 #define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                     nUCIE  0x0       
+#define                     nUCIE  0x0
 #define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                     nDCIE  0x0       
+#define                     nDCIE  0x0
 #define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                   nMINCIE  0x0       
+#define                   nMINCIE  0x0
 #define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   nMAXCIE  0x0       
+#define                   nMAXCIE  0x0
 #define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                  nCOV31IE  0x0       
+#define                  nCOV31IE  0x0
 #define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                  nCOV15IE  0x0       
+#define                  nCOV15IE  0x0
 #define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                  nCZEROIE  0x0       
+#define                  nCZEROIE  0x0
 #define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    nCZMIE  0x0       
+#define                    nCZMIE  0x0
 #define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                   nCZMEIE  0x0       
+#define                   nCZMEIE  0x0
 #define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-#define                   nCZMZIE  0x0       
+#define                   nCZMZIE  0x0
 
 /* Bit masks for CNT_STATUS */
 
 #define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                     nICII  0x0       
+#define                     nICII  0x0
 #define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                     nUCII  0x0       
+#define                     nUCII  0x0
 #define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                     nDCII  0x0       
+#define                     nDCII  0x0
 #define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                   nMINCII  0x0       
+#define                   nMINCII  0x0
 #define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   nMAXCII  0x0       
+#define                   nMAXCII  0x0
 #define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                  nCOV31II  0x0       
+#define                  nCOV31II  0x0
 #define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                  nCOV15II  0x0       
+#define                  nCOV15II  0x0
 #define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                  nCZEROII  0x0       
+#define                  nCZEROII  0x0
 #define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    nCZMII  0x0       
+#define                    nCZMII  0x0
 #define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                   nCZMEII  0x0       
+#define                   nCZMEII  0x0
 #define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-#define                   nCZMZII  0x0       
+#define                   nCZMZII  0x0
 
 /* Bit masks for CNT_COMMAND */
 
@@ -1843,7 +1834,7 @@
 #define                    W1LMIN  0xf0       /* Load Min Register */
 #define                    W1LMAX  0xf00      /* Load Max Register */
 #define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-#define                 nW1ZMONCE  0x0       
+#define                 nW1ZMONCE  0x0
 
 /* Bit masks for CNT_DEBOUNCE */
 
@@ -1853,15 +1844,15 @@
 
 #define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
 #define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
-#define                     nFIEN  0x0       
+#define                     nFIEN  0x0
 #define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
-#define                 nFTESTDEC  0x0       
+#define                 nFTESTDEC  0x0
 #define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
-#define                  nFWRTEST  0x0       
+#define                  nFWRTEST  0x0
 #define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
-#define                    nFRDEN  0x0       
+#define                    nFRDEN  0x0
 #define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
-#define                    nFWREN  0x0       
+#define                    nFWREN  0x0
 
 /* Bit masks for OTP_BEN */
 
@@ -1870,15 +1861,15 @@
 /* Bit masks for OTP_STATUS */
 
 #define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
-#define                    nFCOMP  0x0       
+#define                    nFCOMP  0x0
 #define                    FERROR  0x2        /* OTP/Fuse Access Error */
-#define                   nFERROR  0x0       
+#define                   nFERROR  0x0
 #define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
-#define                 nMMRGLOAD  0x0       
+#define                 nMMRGLOAD  0x0
 #define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
-#define                 nMMRGLOCK  0x0       
+#define                 nMMRGLOCK  0x0
 #define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
-#define                   nFPGMEN  0x0       
+#define                   nFPGMEN  0x0
 
 /* Bit masks for OTP_TIMING */
 
@@ -1892,42 +1883,42 @@
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
-#define                  nEMUDABL  0x0       
+#define                  nEMUDABL  0x0
 #define                   RSTDABL  0x2        /* Reset Disable */
-#define                  nRSTDABL  0x0       
+#define                  nRSTDABL  0x0
 #define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
 #define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
 #define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
 #define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
-#define                  nDMA0OVR  0x0       
+#define                  nDMA0OVR  0x0
 #define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
-#define                  nDMA1OVR  0x0       
+#define                  nDMA1OVR  0x0
 #define                    EMUOVR  0x4000     /* Emulation Override */
-#define                   nEMUOVR  0x0       
+#define                   nEMUOVR  0x0
 #define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
-#define                   nOTPSEN  0x0       
+#define                   nOTPSEN  0x0
 #define                    L2DABL  0x70000    /* L2 Memory Disable. */
 
 /* Bit masks for SECURE_CONTROL */
 
 #define                   SECURE0  0x1        /* SECURE 0 */
-#define                  nSECURE0  0x0       
+#define                  nSECURE0  0x0
 #define                   SECURE1  0x2        /* SECURE 1 */
-#define                  nSECURE1  0x0       
+#define                  nSECURE1  0x0
 #define                   SECURE2  0x4        /* SECURE 2 */
-#define                  nSECURE2  0x0       
+#define                  nSECURE2  0x0
 #define                   SECURE3  0x8        /* SECURE 3 */
-#define                  nSECURE3  0x0       
+#define                  nSECURE3  0x0
 
 /* Bit masks for SECURE_STATUS */
 
 #define                   SECMODE  0x3        /* Secured Mode Control State */
 #define                       NMI  0x4        /* Non Maskable Interrupt */
-#define                      nNMI  0x0       
+#define                      nNMI  0x0
 #define                   AFVALID  0x8        /* Authentication Firmware Valid */
-#define                  nAFVALID  0x0       
+#define                  nAFVALID  0x0
 #define                    AFEXIT  0x10       /* Authentication Firmware Exit */
-#define                   nAFEXIT  0x0       
+#define                   nAFEXIT  0x0
 #define                   SECSTAT  0xe0       /* Secure Status */
 
 /* Bit masks for NFC_CTL */
@@ -1935,60 +1926,60 @@
 #define                    WR_DLY  0xf        /* Write Strobe Delay */
 #define                    RD_DLY  0xf0       /* Read Strobe Delay */
 #define                    NWIDTH  0x100      /* NAND Data Width */
-#define                   nNWIDTH  0x0       
+#define                   nNWIDTH  0x0
 #define                   PG_SIZE  0x200      /* Page Size */
-#define                  nPG_SIZE  0x0       
+#define                  nPG_SIZE  0x0
 
 /* Bit masks for NFC_STAT */
 
 #define                     NBUSY  0x1        /* Not Busy */
-#define                    nNBUSY  0x0       
+#define                    nNBUSY  0x0
 #define                   WB_FULL  0x2        /* Write Buffer Full */
-#define                  nWB_FULL  0x0       
+#define                  nWB_FULL  0x0
 #define                PG_WR_STAT  0x4        /* Page Write Pending */
-#define               nPG_WR_STAT  0x0       
+#define               nPG_WR_STAT  0x0
 #define                PG_RD_STAT  0x8        /* Page Read Pending */
-#define               nPG_RD_STAT  0x0       
+#define               nPG_RD_STAT  0x0
 #define                  WB_EMPTY  0x10       /* Write Buffer Empty */
-#define                 nWB_EMPTY  0x0       
+#define                 nWB_EMPTY  0x0
 
 /* Bit masks for NFC_IRQSTAT */
 
 #define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
-#define                 nNBUSYIRQ  0x0       
+#define                 nNBUSYIRQ  0x0
 #define                    WB_OVF  0x2        /* Write Buffer Overflow */
-#define                   nWB_OVF  0x0       
+#define                   nWB_OVF  0x0
 #define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
-#define                  nWB_EDGE  0x0       
+#define                  nWB_EDGE  0x0
 #define                    RD_RDY  0x8        /* Read Data Ready */
-#define                   nRD_RDY  0x0       
+#define                   nRD_RDY  0x0
 #define                   WR_DONE  0x10       /* Page Write Done */
-#define                  nWR_DONE  0x0       
+#define                  nWR_DONE  0x0
 
 /* Bit masks for NFC_IRQMASK */
 
 #define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
-#define             nMASK_BUSYIRQ  0x0       
+#define             nMASK_BUSYIRQ  0x0
 #define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
-#define               nMASK_WBOVF  0x0       
+#define               nMASK_WBOVF  0x0
 #define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
-#define             nMASK_WBEMPTY  0x0       
+#define             nMASK_WBEMPTY  0x0
 #define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
-#define               nMASK_RDRDY  0x0       
+#define               nMASK_RDRDY  0x0
 #define               MASK_WRDONE  0x10       /* Mask Write Done */
-#define              nMASK_WRDONE  0x0       
+#define              nMASK_WRDONE  0x0
 
 /* Bit masks for NFC_RST */
 
 #define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
-#define                  nECC_RST  0x0       
+#define                  nECC_RST  0x0
 
 /* Bit masks for NFC_PGCTL */
 
 #define               PG_RD_START  0x1        /* Page Read Start */
-#define              nPG_RD_START  0x0       
+#define              nPG_RD_START  0x0
 #define               PG_WR_START  0x2        /* Page Write Start */
-#define              nPG_WR_START  0x0       
+#define              nPG_WR_START  0x0
 
 /* Bit masks for NFC_ECC0 */
 
diff --git a/include/asm-blackfin/mach-bf527/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h
index 49dd693223e..49dd693223e 100644
--- a/include/asm-blackfin/mach-bf527/dma.h
+++ b/arch/blackfin/mach-bf527/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf527/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
index 4e2b3f2020e..4e2b3f2020e 100644
--- a/include/asm-blackfin/mach-bf527/irq.h
+++ b/arch/blackfin/mach-bf527/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf527/mem_init.h b/arch/blackfin/mach-bf527/include/mach/mem_init.h
index cbe03f4a569..cbe03f4a569 100644
--- a/include/asm-blackfin/mach-bf527/mem_init.h
+++ b/arch/blackfin/mach-bf527/include/mach/mem_init.h
diff --git a/include/asm-blackfin/mach-bf527/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
index 193082deaa4..ef46dc991cd 100644
--- a/include/asm-blackfin/mach-bf527/mem_map.h
+++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h
@@ -89,6 +89,11 @@
 #define BFIN_DSUPBANKS	0
 #endif				/*CONFIG_BFIN_DCACHE */
 
+/* Level 2 Memory - none */
+
+#define L2_START	0
+#define L2_LENGTH	0
+
 /* Scratch Pad Memory */
 
 #define L1_SCRATCH_START	0xFFB00000
diff --git a/include/asm-blackfin/mach-bf527/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
index ae4d205bfcf..ae4d205bfcf 100644
--- a/include/asm-blackfin/mach-bf527/portmux.h
+++ b/arch/blackfin/mach-bf527/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf527/ints-priority.c b/arch/blackfin/mach-bf527/ints-priority.c
index 1fa38979396..8a2367403d2 100644
--- a/arch/blackfin/mach-bf527/ints-priority.c
+++ b/arch/blackfin/mach-bf527/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 4103a97c1a7..c66a68f3023 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 
 #include <asm/dma.h>
@@ -141,16 +140,16 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00060000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0x100000,
 		.offset = 0x60000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x6a0000,
 		.offset = 0x00160000,
 	}
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
index 840059241fb..308c98dc5ab 100644
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -14,6 +14,12 @@ config BFIN533_STAMP
 	help
 	  BF533-STAMP board support.
 
+config BLACKSTAMP
+	bool "BlackStamp"
+	help
+	  Support for the BlackStamp board.  Hardware info available at
+	  http://blackfin.uclinux.org/gf/project/blackstamp/
+
 config BFIN533_BLUETECHNIX_CM
 	bool "Bluetechnix CM-BF533"
 	depends on (BF533)
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index b7a1a1d79bd..9afbe72b484 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -7,4 +7,5 @@ obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN533_BLUETECHNIX_CM)   += cm_bf533.o
+obj-$(CONFIG_BLACKSTAMP)               += blackstamp.o
 obj-$(CONFIG_H8606_HVSISTEMAS)         += H8606.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
new file mode 100644
index 00000000000..d064ded8771
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -0,0 +1,401 @@
+/*
+ * File:         arch/blackfin/mach-bf533/blackstamp.c
+ * Based on:     arch/blackfin/mach-bf533/stamp.c
+ * Author:       Benjamin Matthews <bmat@lle.rochester.edu>
+ *               Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2008
+ * Description:  Board Info File for the BlackStamp
+ *
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * More info about the BlackStamp at:
+ * 	http://blackfin.uclinux.org/gf/project/blackstamp/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BlackStamp";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF3,
+		.end = IRQ_PF3,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"},
+}; /* Mapped to the first three PF Test Points */
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= 8,
+	.scl_pin		= 9,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 40,
+}; /* This hasn't actually been used these pins
+    * are (currently) free pins on the expansion connector */
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+	&i2c_gpio_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init blackstamp_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	if (ret < 0)
+		return ret;
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+	bfin_write_FIO_FLAG_S(PF0);
+	SSYNC();
+#endif
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(blackstamp_init);
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index ed2b0b8f5dc..575843f6d9e 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -36,7 +36,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -53,16 +52,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF533";
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -307,43 +306,6 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	38
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 2,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x2030C000,
-		.end = 0x2030C01F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2030D018,
-		.end = 0x2030D01B,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_085, 250000000),
@@ -403,10 +365,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
 };
 
 static int __init cm_bf533_init(void)
@@ -416,10 +374,6 @@ static int __init cm_bf533_init(void)
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 079389cbd85..cc2e7eeb1d5 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -37,7 +37,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -90,16 +89,16 @@ static struct platform_device smc91x_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -255,43 +254,6 @@ static struct platform_device bfin_sir_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -404,10 +366,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -424,10 +382,6 @@ static int __init ezkit_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 13ae49515f7..050ffca5353 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <asm/dma.h>
@@ -114,15 +113,15 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
-		.name   = "Bootloader",
+		.name   = "bootloader(nor)",
 		.size   = 0x40000,
 		.offset = 0,
 	}, {
-		.name   = "Kernel",
+		.name   = "linux kernel(nor)",
 		.size   = 0xE0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name   = "RootFS",
+		.name   = "file system(nor)",
 		.size   = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -164,16 +163,16 @@ static struct platform_device stamp_flash_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -404,43 +403,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -583,10 +545,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -625,10 +583,6 @@ static int __init stamp_init(void)
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index c671e8549b1..01b2b7ead5a 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -30,294 +30,11 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	p0.h = hi(FIO_MASKA_C);
-	p0.l = lo(FIO_MASKA_C);
-	r0 = 0xFFFF(Z);
-	w[p0] = r0.L;	/* Disable all interrupts */
-	ssync;
-
-	p0.h = hi(FIO_MASKB_C);
-	p0.l = lo(FIO_MASKB_C);
-	r0 = 0xFFFF(Z);
-	w[p0] = r0.L;	/* Disable all interrupts */
-	ssync;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(BFIN_UART_LCR);
-	p0.l = lo(BFIN_UART_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLL);
-	p0.l = lo(BFIN_UART_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLH);
-	p0.l = lo(BFIN_UART_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_GCTL);
-	p0.l = lo(BFIN_UART_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
@@ -412,13 +129,6 @@ ENTRY(_start_dma_code)
 	[P2] = R1;
 	SSYNC;
 
-	p0.h = hi(SIC_IWR);
-	p0.l = lo(SIC_IWR);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 8f7ea112fd3..8f7ea112fd3 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h
index 12a41693199..12a41693199 100644
--- a/include/asm-blackfin/mach-bf533/bf533.h
+++ b/arch/blackfin/mach-bf533/include/mach/bf533.h
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index ebf592b59aa..ebf592b59aa 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
diff --git a/include/asm-blackfin/mach-bf533/bfin_sir.h b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h
index 9bb87e9e2e9..9bb87e9e2e9 100644
--- a/include/asm-blackfin/mach-bf533/bfin_sir.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h
diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index d80971b4e3a..d80971b4e3a 100644
--- a/include/asm-blackfin/mach-bf533/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
index 154655452d4..3d8978a52c1 100644
--- a/include/asm-blackfin/mach-bf533/cdefBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -37,7 +37,7 @@
 #include "defBF532.h"
 
 /*include core specific register pointer definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 #include <asm/system.h>
 
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 0ab4dd7494c..7f4633223e6 100644
--- a/include/asm-blackfin/mach-bf533/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -48,7 +48,7 @@
 #define _DEF_BF532_H
 
 /* include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /*********************************************************************************** */
 /* System MMR Register Map */
diff --git a/include/asm-blackfin/mach-bf533/dma.h b/arch/blackfin/mach-bf533/include/mach/dma.h
index bd9d5e94307..bd9d5e94307 100644
--- a/include/asm-blackfin/mach-bf533/dma.h
+++ b/arch/blackfin/mach-bf533/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf533/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
index 5aa38e5da6b..5aa38e5da6b 100644
--- a/include/asm-blackfin/mach-bf533/irq.h
+++ b/arch/blackfin/mach-bf533/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/arch/blackfin/mach-bf533/include/mach/mem_init.h
index 995c06b2b1e..ed2034bf10e 100644
--- a/include/asm-blackfin/mach-bf533/mem_init.h
+++ b/arch/blackfin/mach-bf533/include/mach/mem_init.h
@@ -47,7 +47,7 @@
 #define SDRAM_tRCD      TRCD_2
 #define SDRAM_tWR       TWR_2
 #endif
-#if (CONFIG_SCLK_HZ > 8955223) && (CONFIG_SCLK_HZ <= 104477612)
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
 #define SDRAM_tRP       TRP_2
 #define SDRAM_tRP_num   2
 #define SDRAM_tRAS      TRAS_5
diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h
index bd30b6f3be0..581fc6eea78 100644
--- a/include/asm-blackfin/mach-bf533/mem_map.h
+++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h
@@ -158,6 +158,11 @@
 
 #endif
 
+/* Level 2 Memory - none */
+
+#define L2_START	0
+#define L2_LENGTH	0
+
 /* Scratch Pad Memory */
 
 #define L1_SCRATCH_START	0xFFB00000
diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
index 685a2651dcd..685a2651dcd 100644
--- a/include/asm-blackfin/mach-bf533/portmux.h
+++ b/arch/blackfin/mach-bf533/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
index 7d79e0f9503..f51994b7a2b 100644
--- a/arch/blackfin/mach-bf533/ints-priority.c
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 7e789dbef03..42a57b0acb2 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -15,6 +15,12 @@ config BFIN537_BLUETECHNIX_CM
 	help
 	  CM-BF537 support for EVAL- and DEV-Board.
 
+config BFIN537_BLUETECHNIX_TCM
+	bool "Bluetechnix TCM-BF537"
+	depends on (BF537)
+	help
+	  TCM-BF537 support for EVAL- and DEV-Board.
+
 config PNAV10
 	bool "PNAV board"
 	depends on (BF537)
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index c94f7a5b821..7168cc14afd 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -5,5 +5,6 @@
 obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o
 obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 73f2142875e..dde14720b0e 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -33,6 +33,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -56,16 +57,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF537";
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -307,6 +308,55 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0xE0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 	{
@@ -395,7 +445,7 @@ static struct platform_device bfin_mac_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	64
+#define PATA_INT	IRQ_PF14
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 2,
@@ -510,6 +560,10 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	&bfin_pata_device,
 #endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
+#endif
 };
 
 static int __init cm_bf537_init(void)
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 01b63e2ec18..78a13d5bfd5 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
@@ -307,16 +306,16 @@ static struct platform_device net2272_bfin_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -619,43 +618,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 	&bfin_pcmcia_cf_device,
@@ -717,10 +679,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport0_uart_device,
 	&bfin_sport1_uart_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
 };
 
 static int __init stamp_init(void)
@@ -732,9 +690,6 @@ static int __init stamp_init(void)
 				ARRAY_SIZE(bfin_spi_board_info));
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 18ddf7a5200..48c4cd2d1be 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -100,16 +100,16 @@ static struct platform_device net2272_bfin_device = {
 
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name       = "uboot",
+		.name       = "bootloader(spi)",
 		.size       = PSIZE_UBOOT,
 		.offset     = 0x000000,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name       = "initramfs",
+		.name       = "initramfs(spi)",
 		.size       = PSIZE_INITRAMFS,
 		.offset     = PSIZE_UBOOT
 	}, {
-		.name       = "opt",
+		.name       = "opt(spi)",
 		.size       = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS),
 		.offset     = PSIZE_UBOOT + PSIZE_INITRAMFS,
 	}
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 51c3bab14a6..f9174c11cbd 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -231,16 +231,16 @@ static struct platform_device net2272_bfin_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 6dbc76fb080..8482d22321f 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -364,11 +364,11 @@ const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
 
 static struct mtd_partition bfin_plat_nand_partitions[] = {
 	{
-		.name   = "linux kernel",
+		.name   = "linux kernel(nand)",
 		.size   = 0x400000,
 		.offset = 0,
 	}, {
-		.name   = "file system",
+		.name   = "file system(nand)",
 		.size   = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	},
@@ -439,19 +439,19 @@ static void bfin_plat_nand_init(void) {}
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0xE0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "MAC Address",
+		.name       = "MAC Address(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = 0x3F0000,
 		.mask_flags = MTD_WRITEABLE,
@@ -485,16 +485,16 @@ static struct platform_device stamp_flash_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -584,6 +584,30 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 
 #if defined(CONFIG_MTD_DATAFLASH) \
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
+
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+	.name = "SPI Dataflash",
+	.parts = bfin_spi_dataflash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+};
+
 /* DataFlash chip */
 static struct bfin5xx_spi_chip data_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
@@ -609,9 +633,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
 	{	/* DataFlash chip */
 		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0, /* Framework bus number */
 		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_dataflash_data,
 		.controller_data = &data_flash_chip_info,
 		.mode = SPI_MODE_3,
 	},
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
new file mode 100644
index 00000000000..d5ff705a512
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -0,0 +1,590 @@
+/*
+ * File:         arch/blackfin/mach-bf537/boards/tcm_bf537.c
+ * Based on:     arch/blackfin/mach-bf533/boards/cm_bf537.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2005
+ * Description:  Board description file
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix TCM BF537";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+	{
+		.modalias = "ad1836-spi",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+	{
+		.modalias = "ad9960-spi",
+		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &ad9960_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+	.name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF14,
+		.end = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG15,
+		.end = IRQ_PG15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20200000,
+		.end = 0x20200000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PH14,
+		.end = IRQ_PH14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0xE0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT	IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 2,
+	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x2030C000,
+		.end = 0x2030C01F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2030D018,
+		.end = 0x2030D01B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf537_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+	&hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	&bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
+#endif
+};
+
+static int __init cm_bf537_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+	return 0;
+}
+
+arch_initcall(cm_bf537_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 6b019eaee0b..12eb5cc571d 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -30,324 +30,10 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Initialise General-Purpose I/O Modules on BF537 */
-	/* Rev 0.0 Anomaly 05000212 - PORTx_FER,
-	 * PORT_MUX Registers Do Not accept "writes" correctly:
-	 */
-	p0.h = hi(BFIN_PORT_MUX);
-	p0.l = lo(BFIN_PORT_MUX);
-#if ANOMALY_05000212
-	R0.L = W[P0]; /* Read */
-	SSYNC;
-#endif
-	R0 = (PGDE_UART | PFTE_UART)(Z);
-#if ANOMALY_05000212
-	W[P0] = R0.L; /* Write */
-	SSYNC;
-#endif
-	W[P0] = R0.L; /* Enable both UARTS */
-	SSYNC;
-
-	p0.h = hi(PORTF_FER);
-	p0.l = lo(PORTF_FER);
-#if ANOMALY_05000212
-	R0.L = W[P0]; /* Read */
-	SSYNC;
-#endif
-	R0 = 0x000F(Z);
-#if ANOMALY_05000212
-	W[P0] = R0.L; /* Write */
-	SSYNC;
-#endif
-	/* Enable peripheral function of PORTF for UART0 and UART1 */
-	W[P0] = R0.L;
-	SSYNC;
-
-#if !defined(CONFIG_BF534)
-	p0.h = hi(EMAC_SYSTAT);
-	p0.l = lo(EMAC_SYSTAT);
-	R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
-	R0.l = 0xFFFF;
-	[P0] = R0;
-	SSYNC;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(BFIN_UART_LCR);
-	p0.l = lo(BFIN_UART_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLL);
-	p0.l = lo(BFIN_UART_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLH);
-	p0.l = lo(BFIN_UART_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_GCTL);
-	p0.l = lo(BFIN_UART_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
 
 .section .l1.text
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
@@ -452,13 +138,6 @@ ENTRY(_start_dma_code)
 	[P2] = R1;
 	SSYNC;
 
-	p0.h = hi(SIC_IWR);
-	p0.l = lo(SIC_IWR);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 8460ab9c324..8460ab9c324 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h
index cfe2a221112..cfe2a221112 100644
--- a/include/asm-blackfin/mach-bf537/bf537.h
+++ b/arch/blackfin/mach-bf537/include/mach/bf537.h
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 1bf56ffa22f..1bf56ffa22f 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
diff --git a/include/asm-blackfin/mach-bf537/bfin_sir.h b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h
index cfd8ad4f1f2..cfd8ad4f1f2 100644
--- a/include/asm-blackfin/mach-bf537/bfin_sir.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h
diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index cffc786b2a2..cffc786b2a2 100644
--- a/include/asm-blackfin/mach-bf537/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
index 82de526f809..88d491cd9f3 100644
--- a/include/asm-blackfin/mach-bf537/cdefBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
@@ -38,7 +38,7 @@
 #include "defBF534.h"
 
 /* Include core specific register pointer definitions 								*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 #include <asm/system.h>
 
diff --git a/include/asm-blackfin/mach-bf537/cdefBF537.h b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
index b8fc949a991..b8fc949a991 100644
--- a/include/asm-blackfin/mach-bf537/cdefBF537.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
diff --git a/include/asm-blackfin/mach-bf537/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index d0d80d3152b..a3227f9003f 100644
--- a/include/asm-blackfin/mach-bf537/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -32,7 +32,7 @@
 #define _DEF_BF534_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /************************************************************************************
 ** System MMR Register Map
diff --git a/include/asm-blackfin/mach-bf537/defBF537.h b/arch/blackfin/mach-bf537/include/mach/defBF537.h
index abde24c6d3b..3d6c83e31b1 100644
--- a/include/asm-blackfin/mach-bf537/defBF537.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF537.h
@@ -33,7 +33,7 @@
 #define _DEF_BF537_H
 
 /* Include all Core registers and bit definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* Include all MMR and bit defines common to BF534 */
 #include "defBF534.h"
diff --git a/include/asm-blackfin/mach-bf537/dma.h b/arch/blackfin/mach-bf537/include/mach/dma.h
index 7a964040870..7a964040870 100644
--- a/include/asm-blackfin/mach-bf537/dma.h
+++ b/arch/blackfin/mach-bf537/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
index 2e68a8a1e73..2e68a8a1e73 100644
--- a/include/asm-blackfin/mach-bf537/irq.h
+++ b/arch/blackfin/mach-bf537/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf537/mem_init.h b/arch/blackfin/mach-bf537/include/mach/mem_init.h
index f67698f670c..f67698f670c 100644
--- a/include/asm-blackfin/mach-bf537/mem_init.h
+++ b/arch/blackfin/mach-bf537/include/mach/mem_init.h
diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h
index 5c6726d6f3b..5078b669431 100644
--- a/include/asm-blackfin/mach-bf537/mem_map.h
+++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h
@@ -166,6 +166,11 @@
 
 #endif
 
+/* Level 2 Memory - none */
+
+#define L2_START	0
+#define L2_LENGTH	0
+
 /* Scratch Pad Memory */
 
 #define L1_SCRATCH_START	0xFFB00000
diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h
index 78fee6e0f23..78fee6e0f23 100644
--- a/include/asm-blackfin/mach-bf537/portmux.h
+++ b/arch/blackfin/mach-bf537/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
index a8b915f202e..b1300b3f181 100644
--- a/arch/blackfin/mach-bf537/ints-priority.c
+++ b/arch/blackfin/mach-bf537/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 4f4ae8787ed..ce934ee174e 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -45,7 +45,7 @@
 #include <asm/gpio.h>
 #include <asm/nand.h>
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 #include <asm/dpmc.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
@@ -61,7 +61,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548";
 
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
 	.width =	480,
@@ -319,12 +319,12 @@ static struct platform_device bfin_atapi_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "Linux Kernel",
+		.name = "linux kernel(nand)",
 		.offset = 0,
 		.size = 4 * SIZE_1M,
 	},
 	{
-		.name = "File System",
+		.name = "file system(nand)",
 		.offset = 4 * SIZE_1M,
 		.size = (256 - 4) * SIZE_1M,
 	},
@@ -377,12 +377,12 @@ static struct platform_device bf54x_sdh_device = {
 /* SPI flash chip (m25p16) */
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel",
+		.name = "linux kernel(spi)",
 		.size = 0x1c0000,
 		.offset = 0x40000
 	}
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 166fa2201ee..39357693046 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -48,7 +48,7 @@
 #include <asm/nand.h>
 #include <asm/dpmc.h>
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
 
@@ -106,7 +106,7 @@ arch_initcall(bfin_isp1761_init);
 
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
 	.width =	480,
@@ -365,12 +365,12 @@ static struct platform_device bfin_atapi_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "Linux Kernel",
+		.name = "linux kernel(nand)",
 		.offset = 0,
 		.size = 4 * SIZE_1M,
 	},
 	{
-		.name = "File System",
+		.name = "file system(nand)",
 		.offset = MTDPART_OFS_APPEND,
 		.size = MTDPART_SIZ_FULL,
 	},
@@ -419,15 +419,15 @@ static struct platform_device bf54x_sdh_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0x1C0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = MTDPART_OFS_APPEND,
 	}
@@ -461,12 +461,12 @@ static struct platform_device ezkit_flash_device = {
 /* SPI flash chip (m25p16) */
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel",
+		.name = "linux kernel(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 06b9178cfcf..4d5cfeacb12 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -30,263 +30,11 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK   0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer  Registers*/
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers*/
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-	[p0] = R0;
-	SSYNC;
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-	[p0] = R0;
-	SSYNC;
-
-	/* Initialize stack pointer */
-	SP.L = LO(INITIAL_STACK);
-	SP.H = HI(INITIAL_STACK);
-	FP = SP;
-	USP = SP;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_MBSCTL);
-	p2.l = lo(EBIU_MBSCTL);
-	r0.h = hi(CONFIG_EBIU_MBSCTLVAL);
-	r0.l = lo(CONFIG_EBIU_MBSCTLVAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_MODE);
-	p2.l = lo(EBIU_MODE);
-	r0.h = hi(CONFIG_EBIU_MODEVAL);
-	r0.l = lo(CONFIG_EBIU_MODEVAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_FCTL);
-	p2.l = lo(EBIU_FCTL);
-	r0.h = hi(CONFIG_EBIU_FCTLVAL);
-	r0.l = lo(CONFIG_EBIU_FCTLVAL);
-	[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop;
-	nop;
-	nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-
-	/*
-	 *  load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	call _start_kernel;
-.L_exit:
-	jump.s	.L_exit;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
@@ -443,13 +191,6 @@ ENTRY(_start_dma_code)
 	SSYNC;
 #endif
 
-	p0.h = hi(SIC_IWR0);
-	p0.l = lo(SIC_IWR0);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 3ad59655881..3ad59655881 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
index e748588e893..e748588e893 100644
--- a/include/asm-blackfin/mach-bf548/bf548.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
diff --git a/include/asm-blackfin/mach-bf548/bf54x-lq043.h b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
index 9c7ca62a45e..9c7ca62a45e 100644
--- a/include/asm-blackfin/mach-bf548/bf54x-lq043.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
diff --git a/include/asm-blackfin/mach-bf548/bf54x_keys.h b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
index 1fb4ec77cc2..1fb4ec77cc2 100644
--- a/include/asm-blackfin/mach-bf548/bf54x_keys.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 5e29446a8e0..5e29446a8e0 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
diff --git a/include/asm-blackfin/mach-bf548/bfin_sir.h b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h
index c41f9cf0026..c41f9cf0026 100644
--- a/include/asm-blackfin/mach-bf548/bfin_sir.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index d6ee74ac046..d6ee74ac046 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf548/cdefBF542.h b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
index 60b9f77576f..07aefb9ed79 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
@@ -35,7 +35,7 @@
 #include "defBF542.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF544.h b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
index ea9b4ab496f..431a6927899 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
@@ -35,7 +35,7 @@
 #include "defBF544.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
index ba716277c00..93376e90dfc 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
@@ -35,7 +35,7 @@
 #include "defBF548.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
index ae971ebff6a..9cd74384136 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
@@ -35,7 +35,7 @@
 #include "defBF548.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
index 92d07d96199..ead360b69de 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
@@ -35,7 +35,7 @@
 #include "defBF549.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
index 57ac8cb9b1f..57ac8cb9b1f 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
index a7c809f29ed..b1316541b8d 100644
--- a/include/asm-blackfin/mach-bf548/defBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -32,7 +32,7 @@
 #define _DEF_BF542_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index b8b9870e269..c2c785bdc5f 100644
--- a/include/asm-blackfin/mach-bf548/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -32,7 +32,7 @@
 #define _DEF_BF544_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 3a3a18ebb10..661f0d877bd 100644
--- a/include/asm-blackfin/mach-bf548/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -32,7 +32,7 @@
 #define _DEF_BF548_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
index 1d7c96edb03..85d4bade911 100644
--- a/include/asm-blackfin/mach-bf548/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -32,7 +32,7 @@
 #define _DEF_BF548_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
index fcb72b41e00..09673454164 100644
--- a/include/asm-blackfin/mach-bf548/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -32,7 +32,7 @@
 #define _DEF_BF549_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index e022e896cb1..e022e896cb1 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
diff --git a/include/asm-blackfin/mach-bf548/dma.h b/arch/blackfin/mach-bf548/include/mach/dma.h
index 36a2ef7e784..36a2ef7e784 100644
--- a/include/asm-blackfin/mach-bf548/dma.h
+++ b/arch/blackfin/mach-bf548/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h
index bba82dc75f1..bba82dc75f1 100644
--- a/include/asm-blackfin/mach-bf548/gpio.h
+++ b/arch/blackfin/mach-bf548/include/mach/gpio.h
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index ad380d1f587..ad380d1f587 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/arch/blackfin/mach-bf548/include/mach/mem_init.h
index ab0b863eee6..ab0b863eee6 100644
--- a/include/asm-blackfin/mach-bf548/mem_init.h
+++ b/arch/blackfin/mach-bf548/include/mach/mem_init.h
diff --git a/include/asm-blackfin/mach-bf548/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h
index f99f47bc3a0..f99f47bc3a0 100644
--- a/include/asm-blackfin/mach-bf548/mem_map.h
+++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h
diff --git a/include/asm-blackfin/mach-bf548/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index 8177a567dcd..8177a567dcd 100644
--- a/include/asm-blackfin/mach-bf548/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c
index 2665653cee3..9dd0fa3ac4d 100644
--- a/arch/blackfin/mach-bf548/ints-priority.c
+++ b/arch/blackfin/mach-bf548/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 466ef5929a2..8f40990eea2 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -54,16 +54,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF561";
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -306,7 +306,7 @@ static struct platform_device bfin_sir_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	119
+#define PATA_INT	IRQ_PF46
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 2,
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index bc6feded856..50b4cdceccf 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -35,7 +35,6 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/ata_platform.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
@@ -243,15 +242,15 @@ static struct platform_device bfin_sir_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0x1C0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = MTDPART_OFS_APPEND,
 	}
@@ -350,43 +349,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -499,10 +461,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -538,10 +496,6 @@ static int __init ezkit_init(void)
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index cf1a2dff01e..75ea6a90582 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -30,284 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(BFIN_UART_LCR);
-	p0.l = lo(BFIN_UART_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLL);
-	p0.l = lo(BFIN_UART_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLH);
-	p0.l = lo(BFIN_UART_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_GCTL);
-	p0.l = lo(BFIN_UART_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOGA_CTL);
-	p0.h = hi(WDOGA_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 	p0.h = hi(SICA_IWR0);
 	p0.l = lo(SICA_IWR0);
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 5c5d7d7d695..5c5d7d7d695 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h
index 3ef9e5f3613..3ef9e5f3613 100644
--- a/include/asm-blackfin/mach-bf561/bf561.h
+++ b/arch/blackfin/mach-bf561/include/mach/bf561.h
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 8aa02780e64..8aa02780e64 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
diff --git a/include/asm-blackfin/mach-bf561/bfin_sir.h b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h
index 9bb87e9e2e9..9bb87e9e2e9 100644
--- a/include/asm-blackfin/mach-bf561/bfin_sir.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h
index 0ea8666e676..0ea8666e676 100644
--- a/include/asm-blackfin/mach-bf561/blackfin.h
+++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
index b07ffccd66d..c14d63402e7 100644
--- a/include/asm-blackfin/mach-bf561/cdefBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
@@ -37,7 +37,7 @@
 #include "defBF561.h"
 
 /*include core specific register pointer definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 #include <asm/system.h>
 
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index 1ab50e906fe..4eca2026bb9 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -37,7 +37,7 @@
 #endif
 */
 /* include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /*********************************************************************************** */
 /* System MMR Register Map */
diff --git a/include/asm-blackfin/mach-bf561/dma.h b/arch/blackfin/mach-bf561/include/mach/dma.h
index 8bc46cd89a0..8bc46cd89a0 100644
--- a/include/asm-blackfin/mach-bf561/dma.h
+++ b/arch/blackfin/mach-bf561/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf561/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h
index 6698389c556..6698389c556 100644
--- a/include/asm-blackfin/mach-bf561/irq.h
+++ b/arch/blackfin/mach-bf561/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf561/mem_init.h b/arch/blackfin/mach-bf561/include/mach/mem_init.h
index e163260bca1..e163260bca1 100644
--- a/include/asm-blackfin/mach-bf561/mem_init.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_init.h
diff --git a/include/asm-blackfin/mach-bf561/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
index c26d8486cc4..c26d8486cc4 100644
--- a/include/asm-blackfin/mach-bf561/mem_map.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
diff --git a/include/asm-blackfin/mach-bf561/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h
index a6ee8206efb..a6ee8206efb 100644
--- a/include/asm-blackfin/mach-bf561/portmux.h
+++ b/arch/blackfin/mach-bf561/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
index 09b541b0f7c..9d2f2334472 100644
--- a/arch/blackfin/mach-bf561/ints-priority.c
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 422bfee34ad..e6ed57c56d4 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -3,9 +3,10 @@
 #
 
 obj-y := \
-	cache.o cacheinit.o entry.o \
-	interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o
+	cache.o entry.o head.o \
+	interrupt.o irqpanic.o arch_checks.o ints-priority.o
 
+obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o
 obj-$(CONFIG_PM)          += pm.o dpmc_modes.o
 obj-$(CONFIG_CPU_FREQ)    += cpufreq.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index f9160d83b91..98133b968f7 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -27,8 +27,9 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <asm/mach/anomaly.h>
-#include <asm/mach-common/clocks.h>
+#include <asm/fixed_code.h>
+#include <mach/anomaly.h>
+#include <asm/clocks.h>
 
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 
@@ -53,3 +54,11 @@
 # endif
 
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#if CONFIG_BOOT_LOAD < FIXED_CODE_END
+# error "The kernel load address must be after the fixed code section"
+#endif
+
+#if (CONFIG_BOOT_LOAD & 0x3)
+# error "The kernel load address must be 4 byte aligned"
+#endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 0521b158820..85f8c79b3c3 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -34,81 +34,6 @@
 #include <asm/cache.h>
 
 .text
-.align 2
-ENTRY(_cache_invalidate)
-
-	/*
-	 * Icache or DcacheA or DcacheB Invalidation
-	 * or any combination thereof
-	 * R0 has bits
-	 * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P
-	 * set as required
-	 */
-	[--SP] = R7;
-
-	R7 = R0;
-	CC = BITTST(R7,CPLB_ENABLE_ICACHE_P);
-	IF !CC JUMP .Lno_icache;
-	[--SP] = RETS;
-	CALL _icache_invalidate;
-	RETS = [SP++];
-.Lno_icache:
-	CC = BITTST(R7,CPLB_ENABLE_DCACHE_P);
-	IF !CC JUMP .Lno_dcache_a;
-	R0 = 0;         /* specifies bank A */
-	[--SP] = RETS;
-	CALL _dcache_invalidate;
-	RETS = [SP++];
-.Lno_dcache_a:
-	CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P);
-	IF !CC JUMP .Lno_dcache_b;
-	R0 = 0;
-	BITSET(R0, 23);		/* specifies bank B */
-	[--SP] = RETS;
-	CALL  _dcache_invalidate;
-	RETS = [SP++];
-.Lno_dcache_b:
-	R7 = [SP++];
-	RTS;
-ENDPROC(_cache_invalidate)
-
-/* Invalidate the Entire Instruction cache by
- * disabling IMC bit
- */
-ENTRY(_icache_invalidate)
-ENTRY(_invalidate_entire_icache)
-	[--SP] = ( R7:5);
-
-	P0.L = LO(IMEM_CONTROL);
-	P0.H = HI(IMEM_CONTROL);
-	R7 = [P0];
-
-	/* Clear the IMC bit , All valid bits in the instruction
-	 * cache are set to the invalid state
-	 */
-	BITCLR(R7,IMC_P);
-	CLI R6;
-	SSYNC;		/* SSYNC required before invalidating cache. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	/* Configures the instruction cache agian */
-	R6 = (IMC | ENICPLB);
-	R7 = R7 | R6;
-
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	( R7:5) = [SP++];
-	RTS;
-ENDPROC(_invalidate_entire_icache)
-ENDPROC(_icache_invalidate)
 
 /*
  * blackfin_cache_flush_range(start, end)
@@ -190,46 +115,6 @@ ENTRY(_blackfin_dcache_invalidate_range)
 	RTS;
 ENDPROC(_blackfin_dcache_invalidate_range)
 
-/* Invalidate the Entire Data cache by
- * clearing DMC[1:0] bits
- */
-ENTRY(_invalidate_entire_dcache)
-ENTRY(_dcache_invalidate)
-	[--SP] = ( R7:6);
-
-	P0.L = LO(DMEM_CONTROL);
-	P0.H = HI(DMEM_CONTROL);
-	R7 = [P0];
-
-	/* Clear the DMC[1:0] bits, All valid bits in the data
-	 * cache are set to the invalid state
-	 */
-	BITCLR(R7,DMC0_P);
-	BITCLR(R7,DMC1_P);
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	/* Configures the data cache again */
-
-	R6 = DMEM_CNTR;
-	R7 = R7 | R6;
-
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	( R7:6) = [SP++];
-	RTS;
-ENDPROC(_dcache_invalidate)
-ENDPROC(_invalidate_entire_dcache)
-
 ENTRY(_blackfin_dcache_flush_range)
 	R2 = -L1_CACHE_BYTES;
 	R2 = R0 & R2;
diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S
deleted file mode 100644
index 22fada0c1cb..00000000000
--- a/arch/blackfin/mach-common/cacheinit.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * File:         arch/blackfin/mach-common/cacheinit.S
- * Based on:
- * Author:       LG Soft India
- *
- * Created:      ?
- * Description:  cache initialization
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/* This function sets up the data and instruction cache. The
- * tables like icplb table, dcplb table and Page Descriptor table
- * are defined in cplbtab.h. You can configure those tables for
- * your suitable requirements
- */
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-.text
-
-#if ANOMALY_05000125
-#if defined(CONFIG_BFIN_ICACHE)
-ENTRY(_bfin_write_IMEM_CONTROL)
-
-	/* Enable Instruction Cache */
-	P0.l = LO(IMEM_CONTROL);
-	P0.h = HI(IMEM_CONTROL);
-
-	/* Anomaly 05000125 */
-	CLI R1;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
-	[P0] = R0;
-	SSYNC;
-	STI R1;
-	RTS;
-
-ENDPROC(_bfin_write_IMEM_CONTROL)
-#endif
-
-#if defined(CONFIG_BFIN_DCACHE)
-ENTRY(_bfin_write_DMEM_CONTROL)
-	P0.l = LO(DMEM_CONTROL);
-	P0.h = HI(DMEM_CONTROL);
-
-	CLI R1;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
-	[P0] = R0;
-	SSYNC;
-	STI R1;
-	RTS;
-
-ENDPROC(_bfin_write_DMEM_CONTROL)
-#endif
-
-#endif
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index 5e3f1d8a4fb..ad5431e2cd0 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -6,7 +6,7 @@
 
 #include <linux/linkage.h>
 #include <asm/blackfin.h>
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
 #include <asm/dpmc.h>
 
 .section .l1.text
@@ -78,62 +78,6 @@ ENTRY(_hibernate_mode)
 	jump .Lforever;
 ENDPROC(_hibernate_mode)
 
-ENTRY(_deep_sleep)
-	[--SP] = ( R7:0, P5:0 );
-	[--SP] =  RETS;
-
-	CLI R4;
-
-	R0 = IWR_ENABLE(0);
-	R1 = IWR_DISABLE_ALL;
-	R2 = IWR_DISABLE_ALL;
-
-	call _set_sic_iwr;
-
-	call _set_dram_srfs;
-
-	/* Clear all the interrupts,bits sticky */
-	R0 = 0xFFFF (Z);
-	call _set_rtc_istat
-
-	P0.H = hi(PLL_CTL);
-	P0.L = lo(PLL_CTL);
-	R0 = W[P0](z);
-	BITSET (R0, 5);
-	W[P0] = R0.L;
-
-	call _test_pll_locked;
-
-	SSYNC;
-	IDLE;
-
-	call _unset_dram_srfs;
-
-	call _test_pll_locked;
-
-	R0 = IWR_ENABLE(0);
-	R1 = IWR_DISABLE_ALL;
-	R2 = IWR_DISABLE_ALL;
-
-	call _set_sic_iwr;
-
-	P0.H = hi(PLL_CTL);
-	P0.L = lo(PLL_CTL);
-	R0 = w[p0](z);
-	BITCLR (R0, 3);
-	BITCLR (R0, 5);
-	BITCLR (R0, 8);
-	w[p0] = R0;
-	IDLE;
-	call _test_pll_locked;
-
-	STI R4;
-
-	RETS = [SP++];
-	( R7:0, P5:0 ) = [SP++];
-	RTS;
-ENDPROC(_deep_sleep)
-
 ENTRY(_sleep_deeper)
 	[--SP] = ( R7:0, P5:0 );
 	[--SP] =  RETS;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index eceb484d90f..847c172a99e 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -43,7 +43,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/trace.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 #if defined(CONFIG_BFIN_SCRATCH_REG_RETN)
 # define EX_SCRATCH_REG RETN
@@ -158,14 +158,16 @@ ENTRY(_ex_single_step)
 	cc = r7 == r6;
 	if cc jump _bfin_return_from_exception;
 
+#ifdef CONFIG_KGDB
 	/* Don't do single step in hardware exception handler */
         p5.l = lo(IPEND);
         p5.h = hi(IPEND);
 	r6 = [p5];
+	cc = bittst(r6, 4);
+	if cc jump _bfin_return_from_exception;
 	cc = bittst(r6, 5);
 	if cc jump _bfin_return_from_exception;
 
-#ifdef CONFIG_KGDB
 	/* skip single step if current interrupt priority is higher than
 	 * that of the first instruction, from which gdb starts single step */
 	r6 >>= 6;
@@ -186,17 +188,27 @@ ENTRY(_ex_single_step)
 	if cc jump .Ldo_single_step;
 	r6 += -1;
 	cc = r6 < r7;
-	if cc jump _bfin_return_from_exception;
+	if cc jump 1f;
 .Ldo_single_step:
-#endif
-
+#else
 	/* If we were in user mode, do the single step normally.  */
+	p5.l = lo(IPEND);
+	p5.h = hi(IPEND);
 	r6 = [p5];
 	r7 = 0xffe0 (z);
 	r7 = r7 & r6;
 	cc = r7 == 0;
-	if cc jump 1f;
+	if !cc jump 1f;
+#endif
 
+	/* Single stepping only a single instruction, so clear the trace
+	 * bit here.  */
+	r7 = syscfg;
+	bitclr (r7, 0);
+	syscfg = R7;
+	jump _ex_trap_c;
+
+1:
 	/*
 	 * We were in an interrupt handler.  By convention, all of them save
 	 * SYSCFG with their first instruction, so by checking whether our
@@ -224,15 +236,11 @@ ENTRY(_ex_single_step)
 	cc = R7 == R6;
 	if !cc jump _bfin_return_from_exception;
 
-1:
-	/* Single stepping only a single instruction, so clear the trace
-	 * bit here.  */
 	r7 = syscfg;
 	bitclr (r7, 0);
 	syscfg = R7;
 
-	jump _ex_trap_c;
-
+	/* Fall through to _bfin_return_from_exception.  */
 ENDPROC(_ex_single_step)
 
 ENTRY(_bfin_return_from_exception)
@@ -1414,6 +1422,12 @@ ENTRY(_sys_call_table)
 	.long _sys_semtimedop
 	.long _sys_timerfd_settime
 	.long _sys_timerfd_gettime
+	.long _sys_signalfd4		/* 360 */
+	.long _sys_eventfd2
+	.long _sys_epoll_create1
+	.long _sys_dup3
+	.long _sys_pipe2
+	.long _sys_inotify_init1	/* 365 */
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
new file mode 100644
index 00000000000..191b4e974c4
--- /dev/null
+++ b/arch/blackfin/mach-common/head.S
@@ -0,0 +1,207 @@
+/*
+ * Common Blackfin startup code
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+#include <asm/thread_info.h>
+#include <asm/trace.h>
+
+__INIT
+
+#define INITIAL_STACK	(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+
+ENTRY(__start)
+	/* R0: argument of command line string, passed from uboot, save it */
+	R7 = R0;
+	/* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+	R0 = SYSCFG_SNEN;
+#else
+	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+	SYSCFG = R0;
+	R0 = 0;
+
+	/* Clear Out All the data and pointer Registers */
+	R1 = R0;
+	R2 = R0;
+	R3 = R0;
+	R4 = R0;
+	R5 = R0;
+	R6 = R0;
+
+	P0 = R0;
+	P1 = R0;
+	P2 = R0;
+	P3 = R0;
+	P4 = R0;
+	P5 = R0;
+
+	LC0 = r0;
+	LC1 = r0;
+	L0 = r0;
+	L1 = r0;
+	L2 = r0;
+	L3 = r0;
+
+	/* Clear Out All the DAG Registers */
+	B0 = r0;
+	B1 = r0;
+	B2 = r0;
+	B3 = r0;
+
+	I0 = r0;
+	I1 = r0;
+	I2 = r0;
+	I3 = r0;
+
+	M0 = r0;
+	M1 = r0;
+	M2 = r0;
+	M3 = r0;
+
+	trace_buffer_init(p0,r0);
+	P0 = R1;
+	R0 = R1;
+
+	/* Turn off the icache */
+	p0.l = LO(IMEM_CONTROL);
+	p0.h = HI(IMEM_CONTROL);
+	R1 = [p0];
+	R0 = ~ENICPLB;
+	R0 = R0 & R1;
+	[p0] = R0;
+	SSYNC;
+
+	/* Turn off the dcache */
+	p0.l = LO(DMEM_CONTROL);
+	p0.h = HI(DMEM_CONTROL);
+	R1 = [p0];
+	R0 = ~ENDCPLB;
+	R0 = R0 & R1;
+	[p0] = R0;
+	SSYNC;
+
+	/* Save RETX, in case of doublefault */
+	p0.l = ___retx;
+	p0.h = ___retx;
+	R0 = RETX;
+	[P0] = R0;
+
+	/* Initialize stack pointer */
+	sp.l = lo(INITIAL_STACK);
+	sp.h = hi(INITIAL_STACK);
+	fp = sp;
+	usp = sp;
+
+#ifdef CONFIG_EARLY_PRINTK
+	call _init_early_exception_vectors;
+#endif
+
+	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+	call _bf53x_relocate_l1_mem;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+	call _start_dma_code;
+#endif
+
+	/* This section keeps the processor in supervisor mode
+	 * during kernel boot.  Switches to user mode at end of boot.
+	 * See page 3-9 of Hardware Reference manual for documentation.
+	 */
+
+	/* EVT15 = _real_start */
+
+	p0.l = lo(EVT15);
+	p0.h = hi(EVT15);
+	p1.l = _real_start;
+	p1.h = _real_start;
+	[p0] = p1;
+	csync;
+
+	p0.l = lo(IMASK);
+	p0.h = hi(IMASK);
+	p1.l = IMASK_IVG15;
+	p1.h = 0x0;
+	[p0] = p1;
+	csync;
+
+	raise 15;
+	p0.l = .LWAIT_HERE;
+	p0.h = .LWAIT_HERE;
+	reti = p0;
+#if ANOMALY_05000281
+	nop; nop; nop;
+#endif
+	rti;
+
+.LWAIT_HERE:
+	jump .LWAIT_HERE;
+ENDPROC(__start)
+
+/* A little BF561 glue ... */
+#ifndef WDOG_CTL
+# define WDOG_CTL WDOGA_CTL
+#endif
+
+ENTRY(_real_start)
+	/* Enable nested interrupts */
+	[--sp] = reti;
+
+	/* watchdog off for now */
+	p0.l = lo(WDOG_CTL);
+	p0.h = hi(WDOG_CTL);
+	r0 = 0xAD6(z);
+	w[p0] = r0;
+	ssync;
+
+	/* Zero out the bss region
+	 * Note: this will fail if bss is 0 bytes ...
+	 */
+	r0 = 0 (z);
+	r1.l = ___bss_start;
+	r1.h = ___bss_start;
+	r2.l = ___bss_stop;
+	r2.h = ___bss_stop;
+	r2 = r2 - r1;
+	r2 >>= 2;
+	p1 = r1;
+	p2 = r2;
+	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
+.L_clear_bss:
+	[p1++] = r0;
+
+	/* In case there is a NULL pointer reference,
+	 * zero out region before stext
+	 */
+	p1 = r0;
+	r2.l = __stext;
+	r2.h = __stext;
+	r2 >>= 2;
+	p2 = r2;
+	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
+.L_clear_zero:
+	[p1++] = r0;
+
+	/* Pass the u-boot arguments to the global value command line */
+	R0 = R7;
+	call _cmdline_init;
+
+	/* Load the current thread pointer and stack */
+	sp.l = _init_thread_union;
+	sp.h = _init_thread_union;
+	p1 = THREAD_SIZE (z);
+	sp = sp + p1;
+	usp = sp;
+	fp = sp;
+	jump.l _start_kernel;
+ENDPROC(_real_start)
+
+__FINIT
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 7f752c87fe4..b27e59d3240 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -29,7 +29,7 @@
  */
 
 #include <asm/blackfin.h>
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
 #include <linux/linkage.h>
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>
@@ -37,7 +37,7 @@
 #include <asm/traps.h>
 #include <asm/thread_info.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 .extern _ret_from_exception
 
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 64d746114e4..5fa536727c6 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -71,6 +71,7 @@ atomic_t num_spurious;
 
 #ifdef CONFIG_PM
 unsigned long bfin_sic_iwr[3];	/* Up to 3 SIC_IWRx registers */
+unsigned vr_wakeup;
 #endif
 
 struct ivgx {
@@ -184,17 +185,56 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 #ifdef CONFIG_PM
 int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 {
-	unsigned bank, bit;
+	unsigned bank, bit, wakeup = 0;
 	unsigned long flags;
 	bank = SIC_SYSIRQ(irq) / 32;
 	bit = SIC_SYSIRQ(irq) % 32;
 
+	switch (irq) {
+#ifdef IRQ_RTC
+	case IRQ_RTC:
+	wakeup |= WAKE;
+	break;
+#endif
+#ifdef IRQ_CAN0_RX
+	case IRQ_CAN0_RX:
+	wakeup |= CANWE;
+	break;
+#endif
+#ifdef IRQ_CAN1_RX
+	case IRQ_CAN1_RX:
+	wakeup |= CANWE;
+	break;
+#endif
+#ifdef IRQ_USB_INT0
+	case IRQ_USB_INT0:
+	wakeup |= USBWE;
+	break;
+#endif
+#ifdef IRQ_KEY
+	case IRQ_KEY:
+	wakeup |= KPADWE;
+	break;
+#endif
+#ifdef CONFIG_BF54x
+	case IRQ_CNT:
+	wakeup |= ROTWE;
+	break;
+#endif
+	default:
+	break;
+	}
+
 	local_irq_save(flags);
 
-	if (state)
+	if (state) {
 		bfin_sic_iwr[bank] |= (1 << bit);
-	else
+		vr_wakeup  |= wakeup;
+
+	} else {
 		bfin_sic_iwr[bank] &= ~(1 << bit);
+		vr_wakeup  &= ~wakeup;
+	}
 
 	local_irq_restore(flags);
 
@@ -943,6 +983,11 @@ int __init init_arch_irq(void)
 
 	local_irq_disable();
 
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+	/* Clear EMAC Interrupt Status bits so we can demux it later */
+	bfin_write_EMAC_SYSTAT(-1);
+#endif
+
 #ifdef CONFIG_BF54x
 # ifdef CONFIG_PINTx_REASSIGN
 	pint[0]->assign = CONFIG_PINT0_ASSIGN;
@@ -1028,13 +1073,22 @@ int __init init_arch_irq(void)
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
-	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
-	bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+#if defined(CONFIG_BF52x)
+	/* BF52x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+#else
+	bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+#endif
 # ifdef CONFIG_BF54x
-	bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
 # endif
 #else
-	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 #endif
 
 	return 0;
diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S
index 30b887e67dd..9daf01201e9 100644
--- a/arch/blackfin/mach-common/lock.S
+++ b/arch/blackfin/mach-common/lock.S
@@ -28,13 +28,10 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/cplb.h>
 #include <asm/blackfin.h>
 
 .text
 
-#ifdef CONFIG_BFIN_ICACHE_LOCK
-
 /* When you come here, it is assumed that
  * R0 - Which way to be locked
  */
@@ -189,18 +186,38 @@ ENTRY(_cache_lock)
 	RTS;
 ENDPROC(_cache_lock)
 
-#endif	/* BFIN_ICACHE_LOCK */
-
-/* Return the ILOC bits of IMEM_CONTROL
+/* Invalidate the Entire Instruction cache by
+ * disabling IMC bit
  */
+ENTRY(_invalidate_entire_icache)
+	[--SP] = ( R7:5);
 
-ENTRY(_read_iloc)
-	P1.H = HI(IMEM_CONTROL);
-	P1.L = LO(IMEM_CONTROL);
-	R1 = 0xF;
-	R0 = [P1];
-	R0 = R0 >> 3;
-	R0 = R0 & R1;
+	P0.L = LO(IMEM_CONTROL);
+	P0.H = HI(IMEM_CONTROL);
+	R7 = [P0];
+
+	/* Clear the IMC bit , All valid bits in the instruction
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7,IMC_P);
+	CLI R6;
+	SSYNC;		/* SSYNC required before invalidating cache. */
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	/* Configures the instruction cache agian */
+	R6 = (IMC | ENICPLB);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
 
+	( R7:5) = [SP++];
 	RTS;
-ENDPROC(_read_iloc)
+ENDPROC(_invalidate_entire_icache)
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 4fe6a2366b1..e28c6af1f41 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -83,13 +83,22 @@ void bfin_pm_suspend_standby_enter(void)
 	bfin_pm_standby_restore();
 
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
-	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
-	bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+#if defined(CONFIG_BF52x)
+	/* BF52x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+#else
+	bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+#endif
 # ifdef CONFIG_BF54x
-	bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
 # endif
 #else
-	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 #endif
 
 	local_irq_restore(flags);
@@ -229,28 +238,12 @@ int bfin_pm_suspend_mem_enter(void)
 	wakeup = bfin_read_VR_CTL() & ~FREQ;
 	wakeup |= SCKELOW;
 
-	/* FIXME: merge this somehow with set_irq_wake */
-#ifdef CONFIG_PM_BFIN_WAKE_RTC
-	wakeup |= WAKE;
-#endif
 #ifdef CONFIG_PM_BFIN_WAKE_PH6
 	wakeup |= PHYWE;
 #endif
-#ifdef CONFIG_PM_BFIN_WAKE_CAN
-	wakeup |= CANWE;
-#endif
 #ifdef CONFIG_PM_BFIN_WAKE_GP
 	wakeup |= GPWE;
 #endif
-#ifdef CONFIG_PM_BFIN_WAKE_USB
-	wakeup |= USBWE;
-#endif
-#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD
-	wakeup |= KPADWE;
-#endif
-#ifdef CONFIG_PM_BFIN_WAKE_ROTARY
-	wakeup |= ROTWE;
-#endif
 
 	local_irq_save(flags);
 
@@ -268,7 +261,7 @@ int bfin_pm_suspend_mem_enter(void)
 	icache_disable();
 	bf53x_suspend_l1_mem(memptr);
 
-	do_hibernate(wakeup);	/* Goodbye */
+	do_hibernate(wakeup | vr_wakeup);	/* Goodbye */
 
 	bf53x_resume_l1_mem(memptr);
 
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index 5af3c31c936..4f5e887a0d9 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -66,7 +66,7 @@ static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
 static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
 #endif
 
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
 static struct sram_piece free_l2_sram_head, used_l2_sram_head;
 #endif
 
@@ -175,7 +175,7 @@ static void __init l1_inst_sram_init(void)
 
 static void __init l2_sram_init(void)
 {
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
 	free_l2_sram_head.next =
 		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
 	if (!free_l2_sram_head.next) {
@@ -335,7 +335,7 @@ static int _sram_free(const void *addr,
 		plast->size += pavail->size;
 		kmem_cache_free(sram_piece_cache, pavail);
 	} else {
-		pavail->next = plast;
+		pavail->next = plast->next;
 		plast->next = pavail;
 		plast = pavail;
 	}
@@ -367,7 +367,7 @@ int sram_free(const void *addr)
 		 && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
 		return l1_data_B_sram_free(addr);
 #endif
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
 	else if (addr >= (void *)L2_START
 		 && addr < (void *)(L2_START + L2_LENGTH))
 		return l2_sram_free(addr);
@@ -379,7 +379,7 @@ EXPORT_SYMBOL(sram_free);
 
 void *l1_data_A_sram_alloc(size_t size)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr = NULL;
 
 	/* add mutex operation */
@@ -402,7 +402,7 @@ EXPORT_SYMBOL(l1_data_A_sram_alloc);
 
 int l1_data_A_sram_free(const void *addr)
 {
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
@@ -425,7 +425,7 @@ EXPORT_SYMBOL(l1_data_A_sram_free);
 void *l1_data_B_sram_alloc(size_t size)
 {
 #if L1_DATA_B_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
@@ -450,7 +450,7 @@ EXPORT_SYMBOL(l1_data_B_sram_alloc);
 int l1_data_B_sram_free(const void *addr)
 {
 #if L1_DATA_B_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
@@ -504,7 +504,7 @@ EXPORT_SYMBOL(l1_data_sram_free);
 void *l1_inst_sram_alloc(size_t size)
 {
 #if L1_CODE_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
@@ -529,7 +529,7 @@ EXPORT_SYMBOL(l1_inst_sram_alloc);
 int l1_inst_sram_free(const void *addr)
 {
 #if L1_CODE_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
@@ -551,7 +551,7 @@ EXPORT_SYMBOL(l1_inst_sram_free);
 /* L1 Scratchpad memory allocate function */
 void *l1sram_alloc(size_t size)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
@@ -569,7 +569,7 @@ void *l1sram_alloc(size_t size)
 /* L1 Scratchpad memory allocate function */
 void *l1sram_alloc_max(size_t *psize)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
@@ -587,7 +587,7 @@ void *l1sram_alloc_max(size_t *psize)
 /* L1 Scratchpad memory free function */
 int l1sram_free(const void *addr)
 {
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
@@ -604,8 +604,8 @@ int l1sram_free(const void *addr)
 
 void *l2_sram_alloc(size_t size)
 {
-#ifdef L2_LENGTH
-	unsigned flags;
+#if L2_LENGTH != 0
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
@@ -640,8 +640,8 @@ EXPORT_SYMBOL(l2_sram_zalloc);
 
 int l2_sram_free(const void *addr)
 {
-#ifdef L2_LENGTH
-	unsigned flags;
+#if L2_LENGTH != 0
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
@@ -779,7 +779,7 @@ static int sram_proc_read(char *buf, char **start, off_t offset, int count,
 			&free_l1_inst_sram_head, &used_l1_inst_sram_head))
 		goto not_done;
 #endif
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
 	if (_sram_proc_read(buf, &len, count, "L2",
 			&free_l2_sram_head, &used_l2_sram_head))
 		goto not_done;
diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c
index 2de9d5849ef..111caa1a2ef 100644
--- a/arch/cris/arch-v32/kernel/fasttimer.c
+++ b/arch/cris/arch-v32/kernel/fasttimer.c
@@ -19,8 +19,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 
-#include <linux/version.h>
-
 #include <hwregs/reg_map.h>
 #include <hwregs/reg_rdwr.h>
 #include <hwregs/timer_defs.h>
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index b8a4b94779b..99060ab507e 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1519,6 +1519,11 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
-
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 syscall_table_size = (. - sys_call_table)
diff --git a/include/asm-h8300/Kbuild b/arch/h8300/include/asm/Kbuild
index c68e1680da0..c68e1680da0 100644
--- a/include/asm-h8300/Kbuild
+++ b/arch/h8300/include/asm/Kbuild
diff --git a/include/asm-h8300/a.out.h b/arch/h8300/include/asm/a.out.h
index ded780f0a49..ded780f0a49 100644
--- a/include/asm-h8300/a.out.h
+++ b/arch/h8300/include/asm/a.out.h
diff --git a/include/asm-h8300/atomic.h b/arch/h8300/include/asm/atomic.h
index b4cf0ea97ed..b4cf0ea97ed 100644
--- a/include/asm-h8300/atomic.h
+++ b/arch/h8300/include/asm/atomic.h
diff --git a/include/asm-h8300/auxvec.h b/arch/h8300/include/asm/auxvec.h
index 1d36fe38b08..1d36fe38b08 100644
--- a/include/asm-h8300/auxvec.h
+++ b/arch/h8300/include/asm/auxvec.h
diff --git a/include/asm-h8300/bitops.h b/arch/h8300/include/asm/bitops.h
index cb18e3b0aa9..cb18e3b0aa9 100644
--- a/include/asm-h8300/bitops.h
+++ b/arch/h8300/include/asm/bitops.h
diff --git a/include/asm-h8300/bootinfo.h b/arch/h8300/include/asm/bootinfo.h
index 5bed7e7aac0..5bed7e7aac0 100644
--- a/include/asm-h8300/bootinfo.h
+++ b/arch/h8300/include/asm/bootinfo.h
diff --git a/include/asm-h8300/bug.h b/arch/h8300/include/asm/bug.h
index edddf5b086e..edddf5b086e 100644
--- a/include/asm-h8300/bug.h
+++ b/arch/h8300/include/asm/bug.h
diff --git a/include/asm-h8300/bugs.h b/arch/h8300/include/asm/bugs.h
index 1cb4afba6eb..1cb4afba6eb 100644
--- a/include/asm-h8300/bugs.h
+++ b/arch/h8300/include/asm/bugs.h
diff --git a/include/asm-h8300/byteorder.h b/arch/h8300/include/asm/byteorder.h
index 36e597d6161..36e597d6161 100644
--- a/include/asm-h8300/byteorder.h
+++ b/arch/h8300/include/asm/byteorder.h
diff --git a/include/asm-h8300/cache.h b/arch/h8300/include/asm/cache.h
index c6350283649..c6350283649 100644
--- a/include/asm-h8300/cache.h
+++ b/arch/h8300/include/asm/cache.h
diff --git a/include/asm-h8300/cachectl.h b/arch/h8300/include/asm/cachectl.h
index c464022d8e2..c464022d8e2 100644
--- a/include/asm-h8300/cachectl.h
+++ b/arch/h8300/include/asm/cachectl.h
diff --git a/include/asm-h8300/cacheflush.h b/arch/h8300/include/asm/cacheflush.h
index 5ffdca217b9..5ffdca217b9 100644
--- a/include/asm-h8300/cacheflush.h
+++ b/arch/h8300/include/asm/cacheflush.h
diff --git a/include/asm-h8300/checksum.h b/arch/h8300/include/asm/checksum.h
index 98724e12508..98724e12508 100644
--- a/include/asm-h8300/checksum.h
+++ b/arch/h8300/include/asm/checksum.h
diff --git a/include/asm-h8300/cputime.h b/arch/h8300/include/asm/cputime.h
index 092e187c7b0..092e187c7b0 100644
--- a/include/asm-h8300/cputime.h
+++ b/arch/h8300/include/asm/cputime.h
diff --git a/include/asm-h8300/current.h b/arch/h8300/include/asm/current.h
index 57d74ee55a1..57d74ee55a1 100644
--- a/include/asm-h8300/current.h
+++ b/arch/h8300/include/asm/current.h
diff --git a/include/asm-h8300/dbg.h b/arch/h8300/include/asm/dbg.h
index 2c6d1cbcf73..2c6d1cbcf73 100644
--- a/include/asm-h8300/dbg.h
+++ b/arch/h8300/include/asm/dbg.h
diff --git a/include/asm-h8300/delay.h b/arch/h8300/include/asm/delay.h
index 743beba70f8..743beba70f8 100644
--- a/include/asm-h8300/delay.h
+++ b/arch/h8300/include/asm/delay.h
diff --git a/include/asm-h8300/device.h b/arch/h8300/include/asm/device.h
index d8f9872b0e2..d8f9872b0e2 100644
--- a/include/asm-h8300/device.h
+++ b/arch/h8300/include/asm/device.h
diff --git a/include/asm-h8300/div64.h b/arch/h8300/include/asm/div64.h
index 6cd978cefb2..6cd978cefb2 100644
--- a/include/asm-h8300/div64.h
+++ b/arch/h8300/include/asm/div64.h
diff --git a/include/asm-h8300/dma.h b/arch/h8300/include/asm/dma.h
index 3edbaaaedf5..3edbaaaedf5 100644
--- a/include/asm-h8300/dma.h
+++ b/arch/h8300/include/asm/dma.h
diff --git a/include/asm-h8300/elf.h b/arch/h8300/include/asm/elf.h
index a8b57d1f412..a8b57d1f412 100644
--- a/include/asm-h8300/elf.h
+++ b/arch/h8300/include/asm/elf.h
diff --git a/include/asm-h8300/emergency-restart.h b/arch/h8300/include/asm/emergency-restart.h
index 108d8c48e42..108d8c48e42 100644
--- a/include/asm-h8300/emergency-restart.h
+++ b/arch/h8300/include/asm/emergency-restart.h
diff --git a/include/asm-h8300/errno.h b/arch/h8300/include/asm/errno.h
index 0c2f5641fdc..0c2f5641fdc 100644
--- a/include/asm-h8300/errno.h
+++ b/arch/h8300/include/asm/errno.h
diff --git a/include/asm-h8300/fb.h b/arch/h8300/include/asm/fb.h
index c7df3803099..c7df3803099 100644
--- a/include/asm-h8300/fb.h
+++ b/arch/h8300/include/asm/fb.h
diff --git a/include/asm-h8300/fcntl.h b/arch/h8300/include/asm/fcntl.h
index 1952cb2e3b0..1952cb2e3b0 100644
--- a/include/asm-h8300/fcntl.h
+++ b/arch/h8300/include/asm/fcntl.h
diff --git a/include/asm-h8300/flat.h b/arch/h8300/include/asm/flat.h
index 2a873508a9a..2a873508a9a 100644
--- a/include/asm-h8300/flat.h
+++ b/arch/h8300/include/asm/flat.h
diff --git a/include/asm-h8300/fpu.h b/arch/h8300/include/asm/fpu.h
index 4fc416e80be..4fc416e80be 100644
--- a/include/asm-h8300/fpu.h
+++ b/arch/h8300/include/asm/fpu.h
diff --git a/include/asm-h8300/futex.h b/arch/h8300/include/asm/futex.h
index 6a332a9f099..6a332a9f099 100644
--- a/include/asm-h8300/futex.h
+++ b/arch/h8300/include/asm/futex.h
diff --git a/include/asm-h8300/gpio.h b/arch/h8300/include/asm/gpio.h
index a714f0c0efb..a714f0c0efb 100644
--- a/include/asm-h8300/gpio.h
+++ b/arch/h8300/include/asm/gpio.h
diff --git a/include/asm-h8300/hardirq.h b/arch/h8300/include/asm/hardirq.h
index 9d7f7a7462b..9d7f7a7462b 100644
--- a/include/asm-h8300/hardirq.h
+++ b/arch/h8300/include/asm/hardirq.h
diff --git a/include/asm-h8300/hw_irq.h b/arch/h8300/include/asm/hw_irq.h
index d75a5a1119e..d75a5a1119e 100644
--- a/include/asm-h8300/hw_irq.h
+++ b/arch/h8300/include/asm/hw_irq.h
diff --git a/include/asm-h8300/io.h b/arch/h8300/include/asm/io.h
index 26dc6ccd944..26dc6ccd944 100644
--- a/include/asm-h8300/io.h
+++ b/arch/h8300/include/asm/io.h
diff --git a/include/asm-h8300/ioctl.h b/arch/h8300/include/asm/ioctl.h
index b279fe06dfe..b279fe06dfe 100644
--- a/include/asm-h8300/ioctl.h
+++ b/arch/h8300/include/asm/ioctl.h
diff --git a/include/asm-h8300/ioctls.h b/arch/h8300/include/asm/ioctls.h
index 98a53d06726..98a53d06726 100644
--- a/include/asm-h8300/ioctls.h
+++ b/arch/h8300/include/asm/ioctls.h
diff --git a/include/asm-h8300/ipcbuf.h b/arch/h8300/include/asm/ipcbuf.h
index 2cd1ebcc109..2cd1ebcc109 100644
--- a/include/asm-h8300/ipcbuf.h
+++ b/arch/h8300/include/asm/ipcbuf.h
diff --git a/include/asm-h8300/irq.h b/arch/h8300/include/asm/irq.h
index 13d7c601cd0..13d7c601cd0 100644
--- a/include/asm-h8300/irq.h
+++ b/arch/h8300/include/asm/irq.h
diff --git a/include/asm-h8300/irq_regs.h b/arch/h8300/include/asm/irq_regs.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-h8300/irq_regs.h
+++ b/arch/h8300/include/asm/irq_regs.h
diff --git a/include/asm-h8300/kdebug.h b/arch/h8300/include/asm/kdebug.h
index 6ece1b03766..6ece1b03766 100644
--- a/include/asm-h8300/kdebug.h
+++ b/arch/h8300/include/asm/kdebug.h
diff --git a/include/asm-h8300/kmap_types.h b/arch/h8300/include/asm/kmap_types.h
index 1ec8a342712..1ec8a342712 100644
--- a/include/asm-h8300/kmap_types.h
+++ b/arch/h8300/include/asm/kmap_types.h
diff --git a/include/asm-h8300/linkage.h b/arch/h8300/include/asm/linkage.h
index 6f4df7d4618..6f4df7d4618 100644
--- a/include/asm-h8300/linkage.h
+++ b/arch/h8300/include/asm/linkage.h
diff --git a/include/asm-h8300/local.h b/arch/h8300/include/asm/local.h
index fdd4efe437c..fdd4efe437c 100644
--- a/include/asm-h8300/local.h
+++ b/arch/h8300/include/asm/local.h
diff --git a/include/asm-h8300/mc146818rtc.h b/arch/h8300/include/asm/mc146818rtc.h
index ab9d9646d24..ab9d9646d24 100644
--- a/include/asm-h8300/mc146818rtc.h
+++ b/arch/h8300/include/asm/mc146818rtc.h
diff --git a/include/asm-h8300/md.h b/arch/h8300/include/asm/md.h
index 1a47dc6691f..1a47dc6691f 100644
--- a/include/asm-h8300/md.h
+++ b/arch/h8300/include/asm/md.h
diff --git a/include/asm-h8300/mman.h b/arch/h8300/include/asm/mman.h
index b9f104f22a3..b9f104f22a3 100644
--- a/include/asm-h8300/mman.h
+++ b/arch/h8300/include/asm/mman.h
diff --git a/include/asm-h8300/mmu.h b/arch/h8300/include/asm/mmu.h
index 2ce06ea4610..2ce06ea4610 100644
--- a/include/asm-h8300/mmu.h
+++ b/arch/h8300/include/asm/mmu.h
diff --git a/include/asm-h8300/mmu_context.h b/arch/h8300/include/asm/mmu_context.h
index f44b730da54..f44b730da54 100644
--- a/include/asm-h8300/mmu_context.h
+++ b/arch/h8300/include/asm/mmu_context.h
diff --git a/include/asm-h8300/module.h b/arch/h8300/include/asm/module.h
index de23231f319..de23231f319 100644
--- a/include/asm-h8300/module.h
+++ b/arch/h8300/include/asm/module.h
diff --git a/include/asm-h8300/msgbuf.h b/arch/h8300/include/asm/msgbuf.h
index 6b148cd09aa..6b148cd09aa 100644
--- a/include/asm-h8300/msgbuf.h
+++ b/arch/h8300/include/asm/msgbuf.h
diff --git a/include/asm-h8300/mutex.h b/arch/h8300/include/asm/mutex.h
index 458c1f7fbc1..458c1f7fbc1 100644
--- a/include/asm-h8300/mutex.h
+++ b/arch/h8300/include/asm/mutex.h
diff --git a/include/asm-h8300/page.h b/arch/h8300/include/asm/page.h
index 0b6acf0b03a..0b6acf0b03a 100644
--- a/include/asm-h8300/page.h
+++ b/arch/h8300/include/asm/page.h
diff --git a/include/asm-h8300/page_offset.h b/arch/h8300/include/asm/page_offset.h
index f8706463008..f8706463008 100644
--- a/include/asm-h8300/page_offset.h
+++ b/arch/h8300/include/asm/page_offset.h
diff --git a/include/asm-h8300/param.h b/arch/h8300/include/asm/param.h
index 1c72fb8080f..1c72fb8080f 100644
--- a/include/asm-h8300/param.h
+++ b/arch/h8300/include/asm/param.h
diff --git a/include/asm-h8300/pci.h b/arch/h8300/include/asm/pci.h
index 97389b35aa3..97389b35aa3 100644
--- a/include/asm-h8300/pci.h
+++ b/arch/h8300/include/asm/pci.h
diff --git a/include/asm-h8300/percpu.h b/arch/h8300/include/asm/percpu.h
index 72c03e3666d..72c03e3666d 100644
--- a/include/asm-h8300/percpu.h
+++ b/arch/h8300/include/asm/percpu.h
diff --git a/include/asm-h8300/pgalloc.h b/arch/h8300/include/asm/pgalloc.h
index c2e89a286d2..c2e89a286d2 100644
--- a/include/asm-h8300/pgalloc.h
+++ b/arch/h8300/include/asm/pgalloc.h
diff --git a/include/asm-h8300/pgtable.h b/arch/h8300/include/asm/pgtable.h
index a09230a08e0..a09230a08e0 100644
--- a/include/asm-h8300/pgtable.h
+++ b/arch/h8300/include/asm/pgtable.h
diff --git a/include/asm-h8300/poll.h b/arch/h8300/include/asm/poll.h
index f61540c22d9..f61540c22d9 100644
--- a/include/asm-h8300/poll.h
+++ b/arch/h8300/include/asm/poll.h
diff --git a/include/asm-h8300/posix_types.h b/arch/h8300/include/asm/posix_types.h
index 5c553927fc5..5c553927fc5 100644
--- a/include/asm-h8300/posix_types.h
+++ b/arch/h8300/include/asm/posix_types.h
diff --git a/include/asm-h8300/processor.h b/arch/h8300/include/asm/processor.h
index 69e8a34eb6d..69e8a34eb6d 100644
--- a/include/asm-h8300/processor.h
+++ b/arch/h8300/include/asm/processor.h
diff --git a/include/asm-h8300/ptrace.h b/arch/h8300/include/asm/ptrace.h
index c2e05e4b512..c2e05e4b512 100644
--- a/include/asm-h8300/ptrace.h
+++ b/arch/h8300/include/asm/ptrace.h
diff --git a/include/asm-h8300/regs267x.h b/arch/h8300/include/asm/regs267x.h
index 1bff731a9f7..1bff731a9f7 100644
--- a/include/asm-h8300/regs267x.h
+++ b/arch/h8300/include/asm/regs267x.h
diff --git a/include/asm-h8300/regs306x.h b/arch/h8300/include/asm/regs306x.h
index 027dd633fa2..027dd633fa2 100644
--- a/include/asm-h8300/regs306x.h
+++ b/arch/h8300/include/asm/regs306x.h
diff --git a/include/asm-h8300/resource.h b/arch/h8300/include/asm/resource.h
index 46c5f439160..46c5f439160 100644
--- a/include/asm-h8300/resource.h
+++ b/arch/h8300/include/asm/resource.h
diff --git a/include/asm-h8300/scatterlist.h b/arch/h8300/include/asm/scatterlist.h
index d3ecdd87ac9..d3ecdd87ac9 100644
--- a/include/asm-h8300/scatterlist.h
+++ b/arch/h8300/include/asm/scatterlist.h
diff --git a/include/asm-h8300/sections.h b/arch/h8300/include/asm/sections.h
index a81743e8b74..a81743e8b74 100644
--- a/include/asm-h8300/sections.h
+++ b/arch/h8300/include/asm/sections.h
diff --git a/include/asm-h8300/segment.h b/arch/h8300/include/asm/segment.h
index b79a82d0f99..b79a82d0f99 100644
--- a/include/asm-h8300/segment.h
+++ b/arch/h8300/include/asm/segment.h
diff --git a/include/asm-h8300/sembuf.h b/arch/h8300/include/asm/sembuf.h
index e04a3ec0cb9..e04a3ec0cb9 100644
--- a/include/asm-h8300/sembuf.h
+++ b/arch/h8300/include/asm/sembuf.h
diff --git a/include/asm-h8300/setup.h b/arch/h8300/include/asm/setup.h
index e2c600e9673..e2c600e9673 100644
--- a/include/asm-h8300/setup.h
+++ b/arch/h8300/include/asm/setup.h
diff --git a/include/asm-h8300/sh_bios.h b/arch/h8300/include/asm/sh_bios.h
index b6bb6e58295..b6bb6e58295 100644
--- a/include/asm-h8300/sh_bios.h
+++ b/arch/h8300/include/asm/sh_bios.h
diff --git a/include/asm-h8300/shm.h b/arch/h8300/include/asm/shm.h
index ed6623c0545..ed6623c0545 100644
--- a/include/asm-h8300/shm.h
+++ b/arch/h8300/include/asm/shm.h
diff --git a/include/asm-h8300/shmbuf.h b/arch/h8300/include/asm/shmbuf.h
index 64e77993a7a..64e77993a7a 100644
--- a/include/asm-h8300/shmbuf.h
+++ b/arch/h8300/include/asm/shmbuf.h
diff --git a/include/asm-h8300/shmparam.h b/arch/h8300/include/asm/shmparam.h
index d1863953ec6..d1863953ec6 100644
--- a/include/asm-h8300/shmparam.h
+++ b/arch/h8300/include/asm/shmparam.h
diff --git a/include/asm-h8300/sigcontext.h b/arch/h8300/include/asm/sigcontext.h
index e4b81505f8f..e4b81505f8f 100644
--- a/include/asm-h8300/sigcontext.h
+++ b/arch/h8300/include/asm/sigcontext.h
diff --git a/include/asm-h8300/siginfo.h b/arch/h8300/include/asm/siginfo.h
index bc8fbea931a..bc8fbea931a 100644
--- a/include/asm-h8300/siginfo.h
+++ b/arch/h8300/include/asm/siginfo.h
diff --git a/include/asm-h8300/signal.h b/arch/h8300/include/asm/signal.h
index 7bc15048a64..7bc15048a64 100644
--- a/include/asm-h8300/signal.h
+++ b/arch/h8300/include/asm/signal.h
diff --git a/include/asm-h8300/smp.h b/arch/h8300/include/asm/smp.h
index 9e9bd7e5892..9e9bd7e5892 100644
--- a/include/asm-h8300/smp.h
+++ b/arch/h8300/include/asm/smp.h
diff --git a/include/asm-h8300/socket.h b/arch/h8300/include/asm/socket.h
index da2520dbf25..da2520dbf25 100644
--- a/include/asm-h8300/socket.h
+++ b/arch/h8300/include/asm/socket.h
diff --git a/include/asm-h8300/sockios.h b/arch/h8300/include/asm/sockios.h
index e9c7ec810c2..e9c7ec810c2 100644
--- a/include/asm-h8300/sockios.h
+++ b/arch/h8300/include/asm/sockios.h
diff --git a/include/asm-h8300/spinlock.h b/arch/h8300/include/asm/spinlock.h
index d5407fa173e..d5407fa173e 100644
--- a/include/asm-h8300/spinlock.h
+++ b/arch/h8300/include/asm/spinlock.h
diff --git a/include/asm-h8300/stat.h b/arch/h8300/include/asm/stat.h
index 62c3cc24dfe..62c3cc24dfe 100644
--- a/include/asm-h8300/stat.h
+++ b/arch/h8300/include/asm/stat.h
diff --git a/include/asm-h8300/statfs.h b/arch/h8300/include/asm/statfs.h
index b96efa712aa..b96efa712aa 100644
--- a/include/asm-h8300/statfs.h
+++ b/arch/h8300/include/asm/statfs.h
diff --git a/include/asm-h8300/string.h b/arch/h8300/include/asm/string.h
index ca5034897d8..ca5034897d8 100644
--- a/include/asm-h8300/string.h
+++ b/arch/h8300/include/asm/string.h
diff --git a/include/asm-h8300/system.h b/arch/h8300/include/asm/system.h
index 4b8e475908a..4b8e475908a 100644
--- a/include/asm-h8300/system.h
+++ b/arch/h8300/include/asm/system.h
diff --git a/include/asm-h8300/target_time.h b/arch/h8300/include/asm/target_time.h
index 9f2a9aa1fe6..9f2a9aa1fe6 100644
--- a/include/asm-h8300/target_time.h
+++ b/arch/h8300/include/asm/target_time.h
diff --git a/include/asm-h8300/termbits.h b/arch/h8300/include/asm/termbits.h
index 31eca81db3f..31eca81db3f 100644
--- a/include/asm-h8300/termbits.h
+++ b/arch/h8300/include/asm/termbits.h
diff --git a/include/asm-h8300/termios.h b/arch/h8300/include/asm/termios.h
index 70eea64b421..70eea64b421 100644
--- a/include/asm-h8300/termios.h
+++ b/arch/h8300/include/asm/termios.h
diff --git a/include/asm-h8300/thread_info.h b/arch/h8300/include/asm/thread_info.h
index aafd4d322ec..aafd4d322ec 100644
--- a/include/asm-h8300/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
diff --git a/include/asm-h8300/timex.h b/arch/h8300/include/asm/timex.h
index 23e67013439..23e67013439 100644
--- a/include/asm-h8300/timex.h
+++ b/arch/h8300/include/asm/timex.h
diff --git a/include/asm-h8300/tlb.h b/arch/h8300/include/asm/tlb.h
index 3dea80ad9e6..3dea80ad9e6 100644
--- a/include/asm-h8300/tlb.h
+++ b/arch/h8300/include/asm/tlb.h
diff --git a/include/asm-h8300/tlbflush.h b/arch/h8300/include/asm/tlbflush.h
index 41c148a9208..41c148a9208 100644
--- a/include/asm-h8300/tlbflush.h
+++ b/arch/h8300/include/asm/tlbflush.h
diff --git a/include/asm-h8300/topology.h b/arch/h8300/include/asm/topology.h
index fdc121924d4..fdc121924d4 100644
--- a/include/asm-h8300/topology.h
+++ b/arch/h8300/include/asm/topology.h
diff --git a/include/asm-h8300/traps.h b/arch/h8300/include/asm/traps.h
index 41cf6be02f6..41cf6be02f6 100644
--- a/include/asm-h8300/traps.h
+++ b/arch/h8300/include/asm/traps.h
diff --git a/include/asm-h8300/types.h b/arch/h8300/include/asm/types.h
index 12875190b15..12875190b15 100644
--- a/include/asm-h8300/types.h
+++ b/arch/h8300/include/asm/types.h
diff --git a/include/asm-h8300/uaccess.h b/arch/h8300/include/asm/uaccess.h
index 356068cd087..356068cd087 100644
--- a/include/asm-h8300/uaccess.h
+++ b/arch/h8300/include/asm/uaccess.h
diff --git a/include/asm-h8300/ucontext.h b/arch/h8300/include/asm/ucontext.h
index 0bcf8f85fab..0bcf8f85fab 100644
--- a/include/asm-h8300/ucontext.h
+++ b/arch/h8300/include/asm/ucontext.h
diff --git a/include/asm-h8300/unaligned.h b/arch/h8300/include/asm/unaligned.h
index b8d06c70c2d..b8d06c70c2d 100644
--- a/include/asm-h8300/unaligned.h
+++ b/arch/h8300/include/asm/unaligned.h
diff --git a/include/asm-h8300/unistd.h b/arch/h8300/include/asm/unistd.h
index 99f3c3561ec..99f3c3561ec 100644
--- a/include/asm-h8300/unistd.h
+++ b/arch/h8300/include/asm/unistd.h
diff --git a/include/asm-h8300/user.h b/arch/h8300/include/asm/user.h
index 14a9e18950f..14a9e18950f 100644
--- a/include/asm-h8300/user.h
+++ b/arch/h8300/include/asm/user.h
diff --git a/include/asm-h8300/virtconvert.h b/arch/h8300/include/asm/virtconvert.h
index 19cfd62b11c..19cfd62b11c 100644
--- a/include/asm-h8300/virtconvert.h
+++ b/arch/h8300/include/asm/virtconvert.h
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index a1d228f5e4e..9942f24aff9 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -40,9 +40,6 @@
 
 #undef DEBUG
 
-extern void die_if_kernel(char *,struct pt_regs *,long);
-extern void free_initmem(void);
-
 /*
  * BAD_PAGE is the page that is used for page faults when linux
  * is out-of-memory. Older versions of linux just did a
@@ -73,7 +70,7 @@ extern unsigned long memory_end;
  * The parameters are pointers to where to stick the starting and ending
  * addresses of available kernel virtual memory.
  */
-void paging_init(void)
+void __init paging_init(void)
 {
 	/*
 	 * Make sure start_mem is page aligned,  otherwise bootmem and
@@ -122,7 +119,7 @@ void paging_init(void)
 	}
 }
 
-void mem_init(void)
+void __init mem_init(void)
 {
 	int codek = 0, datak = 0, initk = 0;
 	/* DAVIDM look at setup memory map generically with reserved area */
@@ -178,7 +175,7 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 #endif
 
 void
-free_initmem()
+free_initmem(void)
 {
 #ifdef CONFIG_RAMKERNEL
 	unsigned long addr;
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 451f2ffb137..48e496fe1e7 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -171,8 +171,8 @@ config IA64_SGI_SN2
 	  to select this option.  If in doubt, select ia64 generic support
 	  instead.
 
-config IA64_SGI_UV`
-	bool "SGI-UV`"
+config IA64_SGI_UV
+	bool "SGI-UV"
 	select NUMA
 	select ACPI_NUMA
 	select SWIOTLB
@@ -321,10 +321,10 @@ config SMP
 	  If you don't know what to do here, say N.
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-1024)"
-	range 2 1024
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
 	depends on SMP
-	default "1024"
+	default "4096"
 	help
 	  You should set this to the number of CPUs in your system, but
 	  keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 0210545e7f6..9f483976228 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -1,20 +1,16 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 13:55:32 2007
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 15:38:01 2008
 #
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
@@ -23,20 +19,34 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=20
-# CONFIG_CPUSETS is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -44,6 +54,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -53,12 +64,30 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -68,6 +97,8 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -81,6 +112,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Processor type and features
@@ -91,22 +123,28 @@ CONFIG_ZONE_DMA=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_DMI=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_UNCACHED_ALLOCATOR=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
 # CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_SGI_UV is not set
 # CONFIG_IA64_HP_SIM is not set
 # CONFIG_ITANIUM is not set
 CONFIG_MCKINLEY=y
@@ -116,22 +154,26 @@ CONFIG_MCKINLEY=y
 CONFIG_IA64_PAGE_SIZE_64KB=y
 CONFIG_PGTABLE_3=y
 # CONFIG_PGTABLE_4 is not set
+CONFIG_HZ=250
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_IA64_L1_CACHE_SHIFT=7
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=17
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
 CONFIG_SMP=y
-CONFIG_NR_CPUS=512
+CONFIG_NR_CPUS=4096
 CONFIG_HOTPLUG_CPU=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PERMIT_BSP_REMOVE is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
@@ -141,6 +183,8 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
@@ -148,6 +192,7 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_NR_QUICK=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -162,12 +207,14 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
 # CONFIG_IA64_MC_ERR_INJECT is not set
 CONFIG_SGI_SN=y
 # CONFIG_IA64_ESI is not set
+# CONFIG_IA64_HP_AML_NFW is not set
 
 #
 # SN Devices
@@ -179,6 +226,7 @@ CONFIG_CRASH_DUMP=y
 #
 # Firmware Drivers
 #
+# CONFIG_FIRMWARE_MEMMAP is not set
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
 CONFIG_DMIID=y
@@ -189,24 +237,25 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
 CONFIG_ACPI=y
 CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_PROC_EVENT=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
-# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_DOCK=y
+# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -225,6 +274,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_FAKE is not set
@@ -233,15 +283,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 # CONFIG_HOTPLUG_PCI_CPCI is not set
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 # CONFIG_HOTPLUG_PCI_SGI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -254,6 +296,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -273,6 +316,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -280,8 +324,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -298,10 +340,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -309,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -330,13 +369,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_PNP=y
@@ -360,25 +403,35 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_SGI_IOC4=y
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_SGI_XP=m
+# CONFIG_HP_ILO is not set
+CONFIG_SGI_GRU=m
+# CONFIG_SGI_GRU_DEBUG is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 CONFIG_BLK_DEV_IDESCSI=m
@@ -390,25 +443,26 @@ CONFIG_IDE_PROC_FS=y
 # IDE chipset support/bugfixes
 #
 # CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -425,10 +479,7 @@ CONFIG_BLK_DEV_SGIIOC4=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -468,10 +519,8 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -481,6 +530,8 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -491,12 +542,14 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
@@ -505,7 +558,68 @@ CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+CONFIG_ATA_NONSTANDARD=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+CONFIG_ATA_PIIX=y
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ACPI is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -522,36 +636,52 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
 # CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=m
 CONFIG_FUSION_SAS=y
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
@@ -569,13 +699,16 @@ CONFIG_TULIP=m
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 CONFIG_EEPRO100=m
 CONFIG_E100=m
 # CONFIG_FEALNX is not set
@@ -583,17 +716,22 @@ CONFIG_E100=m
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+CONFIG_IGB=y
+# CONFIG_IGB_LRO is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -606,14 +744,20 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -621,6 +765,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -629,7 +774,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -637,8 +781,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 # CONFIG_NETPOLL_TRAP is not set
 CONFIG_NET_POLL_CONTROLLER=y
@@ -660,7 +804,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -709,9 +852,11 @@ CONFIG_GAMEPORT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -719,15 +864,16 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
 CONFIG_SGI_SNSC=y
 CONFIG_SGI_TIOCX=y
 CONFIG_SGI_MBCS=m
@@ -759,76 +905,100 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_EFI_RTC=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-CONFIG_AGP=m
-CONFIG_AGP_I460=m
-CONFIG_AGP_HP_ZX1=m
-CONFIG_AGP_SGI_TIOCA=m
-CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=m
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
@@ -836,15 +1006,7 @@ CONFIG_DAB=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -862,22 +1024,18 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -886,10 +1044,12 @@ CONFIG_SND_MPU401=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
@@ -912,10 +1072,10 @@ CONFIG_SND_EMU10K1=m
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
 CONFIG_SND_FM801=m
-# CONFIG_SND_FM801_TEA575X_BOOL is not set
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -933,29 +1093,19 @@ CONFIG_SND_FM801=m
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -976,6 +1126,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -984,17 +1135,17 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1008,6 +1159,7 @@ CONFIG_USB_UHCI_HCD=m
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1027,7 +1179,9 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1040,10 +1194,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1069,67 +1219,32 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
 # CONFIG_INFINIBAND_USER_MAD is not set
 # CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
 # CONFIG_INFINIBAND_AMSO1100 is not set
 # CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_CM is not set
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 # CONFIG_INFINIBAND_SRP is not set
 # CONFIG_INFINIBAND_ISER is not set
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
-# CONFIG_MSPEC is not set
+CONFIG_MSPEC=m
 
 #
 # File systems
@@ -1145,7 +1260,6 @@ CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
@@ -1157,17 +1271,15 @@ CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=y
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1205,7 +1317,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1220,32 +1331,30 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
@@ -1281,10 +1390,6 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1325,22 +1430,24 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -1358,16 +1465,12 @@ CONFIG_IRQ_PER_CPU=y
 # CONFIG_HP_SIMSCSI is not set
 
 #
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1375,10 +1478,14 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1388,10 +1495,15 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1405,41 +1517,85 @@ CONFIG_SYSVIPC_COMPAT=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
deleted file mode 100644
index 7f6b2377d13..00000000000
--- a/arch/ia64/configs/sn2_defconfig
+++ /dev/null
@@ -1,1285 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 16:03:40 2007
-#
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_TASKSTATS=y
-# CONFIG_TASK_DELAY_ACCT is not set
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_DMI=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_IA64_GENERIC is not set
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-CONFIG_IA64_SGI_SN2=y
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-# CONFIG_IA64_PAGE_SIZE_16KB is not set
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_IA64_CYCLONE is not set
-CONFIG_IOSAPIC=y
-CONFIG_IA64_SGI_SN_XP=m
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=1024
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=10
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IA64_MC_ERR_INJECT=y
-CONFIG_SGI_SN=y
-# CONFIG_IA64_ESI is not set
-# CONFIG_IA64_HP_AML_NFW is not set
-
-#
-# SN Devices
-#
-CONFIG_SGI_IOC3=y
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_DMIID=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_ACPI=y
-# CONFIG_ACPI_PROCFS is not set
-CONFIG_ACPI_PROC_EVENT=y
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_FAN is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_PROCESSOR is not set
-CONFIG_ACPI_NUMA=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_PCIEAER=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_ACPI is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_PCI_SGI=y
-# CONFIG_PCCARD is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SGIIOC4=y
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-# CONFIG_SCSI_SAS_ATA is not set
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA_FC=y
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-CONFIG_ATA=y
-CONFIG_ATA_NONSTANDARD=y
-CONFIG_ATA_ACPI=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ACPI is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_MULTIPATH=y
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_DELAY is not set
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LOGGING=y
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-# CONFIG_CHELSIO_T1_NAPI is not set
-CONFIG_CHELSIO_T3=m
-CONFIG_IXGBE=m
-# CONFIG_IXGB is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_UNICODE is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_SGI_SNSC=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_MBCS=m
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_SGI_IOC4=y
-CONFIG_SERIAL_SGI_IOC3=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_MMTIMER=y
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_AGP=y
-CONFIG_AGP_SGI_TIOCA=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-# CONFIG_MLX4_INFINIBAND is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-# CONFIG_INFINIBAND_ISER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-CONFIG_MSPEC=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index 06efd1f9b80..ff88c48c5d1 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -262,7 +262,7 @@ ia32_syscall_table:
 	data8 sys_uselib
 	data8 sys_swapon
 	data8 sys_reboot
-	data8 sys32_readdir
+	data8 compat_sys_old_readdir
 	data8 sys32_mmap	  /* 90 */
 	data8 sys32_munmap
 	data8 sys_truncate
diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h
index c5c872b250d..dd0c53687a9 100644
--- a/arch/ia64/ia32/ia32priv.h
+++ b/arch/ia64/ia32/ia32priv.h
@@ -276,13 +276,6 @@ typedef struct compat_siginfo {
 	} _sifields;
 } compat_siginfo_t;
 
-struct old_linux32_dirent {
-	u32	d_ino;
-	u32	d_offset;
-	u16	d_namlen;
-	char	d_name[1];
-};
-
 /*
  * IA-32 ELF specific definitions for IA-64.
  */
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 465116aecb8..bf196cbb379 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1210,138 +1210,6 @@ sys32_settimeofday (struct compat_timeval __user *tv, struct timezone __user *tz
 	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
 }
 
-struct getdents32_callback {
-	struct compat_dirent __user *current_dir;
-	struct compat_dirent __user *previous;
-	int count;
-	int error;
-};
-
-struct readdir32_callback {
-	struct old_linux32_dirent __user * dirent;
-	int count;
-};
-
-static int
-filldir32 (void *__buf, const char *name, int namlen, loff_t offset, u64 ino,
-	   unsigned int d_type)
-{
-	struct compat_dirent __user * dirent;
-	struct getdents32_callback * buf = (struct getdents32_callback *) __buf;
-	int reclen = ROUND_UP(offsetof(struct compat_dirent, d_name) + namlen + 1, 4);
-	u32 d_ino;
-
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->error = -EFAULT;	/* only used if we fail.. */
-	dirent = buf->previous;
-	if (dirent)
-		if (put_user(offset, &dirent->d_off))
-			return -EFAULT;
-	dirent = buf->current_dir;
-	buf->previous = dirent;
-	if (put_user(d_ino, &dirent->d_ino)
-	    || put_user(reclen, &dirent->d_reclen)
-	    || copy_to_user(dirent->d_name, name, namlen)
-	    || put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
-	dirent = (struct compat_dirent __user *) ((char __user *) dirent + reclen);
-	buf->current_dir = dirent;
-	buf->count -= reclen;
-	return 0;
-}
-
-asmlinkage long
-sys32_getdents (unsigned int fd, struct compat_dirent __user *dirent, unsigned int count)
-{
-	struct file * file;
-	struct compat_dirent __user * lastdirent;
-	struct getdents32_callback buf;
-	int error;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, count))
-		goto out;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.current_dir = dirent;
-	buf.previous = NULL;
-	buf.count = count;
-	buf.error = 0;
-
-	error = vfs_readdir(file, filldir32, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
-	lastdirent = buf.previous;
-	if (lastdirent) {
-		if (put_user(file->f_pos, &lastdirent->d_off))
-			error = -EFAULT;
-		else
-			error = count - buf.count;
-	}
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-static int
-fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, u64 ino,
-	      unsigned int d_type)
-{
-	struct readdir32_callback * buf = (struct readdir32_callback *) __buf;
-	struct old_linux32_dirent __user * dirent;
-	u32 d_ino;
-
-	if (buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->count++;
-	dirent = buf->dirent;
-	if (put_user(d_ino, &dirent->d_ino)
-	    || put_user(offset, &dirent->d_offset)
-	    || put_user(namlen, &dirent->d_namlen)
-	    || copy_to_user(dirent->d_name, name, namlen)
-	    || put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
-	return 0;
-}
-
-asmlinkage long
-sys32_readdir (unsigned int fd, void __user *dirent, unsigned int count)
-{
-	int error;
-	struct file * file;
-	struct readdir32_callback buf;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.count = 0;
-	buf.dirent = dirent;
-
-	error = vfs_readdir(file, fillonedir32, &buf);
-	if (error >= 0)
-		error = buf.count;
-	fput(file);
-out:
-	return error;
-}
-
 struct sel_arg_struct {
 	unsigned int n;
 	unsigned int inp;
diff --git a/include/asm-ia64/Kbuild b/arch/ia64/include/asm/Kbuild
index ccbe8ae47a6..ccbe8ae47a6 100644
--- a/include/asm-ia64/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
diff --git a/include/asm-ia64/a.out.h b/arch/ia64/include/asm/a.out.h
index 193dcfb6759..193dcfb6759 100644
--- a/include/asm-ia64/a.out.h
+++ b/arch/ia64/include/asm/a.out.h
diff --git a/include/asm-ia64/acpi-ext.h b/arch/ia64/include/asm/acpi-ext.h
index 734d137dda6..734d137dda6 100644
--- a/include/asm-ia64/acpi-ext.h
+++ b/arch/ia64/include/asm/acpi-ext.h
diff --git a/include/asm-ia64/acpi.h b/arch/ia64/include/asm/acpi.h
index fcfad326f4c..0f82cc2934e 100644
--- a/include/asm-ia64/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -1,6 +1,4 @@
 /*
- *  asm-ia64/acpi.h
- *
  *  Copyright (C) 1999 VA Linux Systems
  *  Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
  *  Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
diff --git a/include/asm-ia64/agp.h b/arch/ia64/include/asm/agp.h
index c11fdd8ab4d..c11fdd8ab4d 100644
--- a/include/asm-ia64/agp.h
+++ b/arch/ia64/include/asm/agp.h
diff --git a/include/asm-ia64/asmmacro.h b/arch/ia64/include/asm/asmmacro.h
index c1642fd6402..c1642fd6402 100644
--- a/include/asm-ia64/asmmacro.h
+++ b/arch/ia64/include/asm/asmmacro.h
diff --git a/include/asm-ia64/atomic.h b/arch/ia64/include/asm/atomic.h
index 50c2b83fd5a..50c2b83fd5a 100644
--- a/include/asm-ia64/atomic.h
+++ b/arch/ia64/include/asm/atomic.h
diff --git a/include/asm-ia64/auxvec.h b/arch/ia64/include/asm/auxvec.h
index 23cebe5685b..23cebe5685b 100644
--- a/include/asm-ia64/auxvec.h
+++ b/arch/ia64/include/asm/auxvec.h
diff --git a/include/asm-ia64/bitops.h b/arch/ia64/include/asm/bitops.h
index e2ca8003733..e2ca8003733 100644
--- a/include/asm-ia64/bitops.h
+++ b/arch/ia64/include/asm/bitops.h
diff --git a/include/asm-ia64/break.h b/arch/ia64/include/asm/break.h
index f0340203989..f0340203989 100644
--- a/include/asm-ia64/break.h
+++ b/arch/ia64/include/asm/break.h
diff --git a/include/asm-ia64/bug.h b/arch/ia64/include/asm/bug.h
index 823616b5020..823616b5020 100644
--- a/include/asm-ia64/bug.h
+++ b/arch/ia64/include/asm/bug.h
diff --git a/include/asm-ia64/bugs.h b/arch/ia64/include/asm/bugs.h
index 433523e3b2e..433523e3b2e 100644
--- a/include/asm-ia64/bugs.h
+++ b/arch/ia64/include/asm/bugs.h
diff --git a/include/asm-ia64/byteorder.h b/arch/ia64/include/asm/byteorder.h
index 69bd41d7c26..69bd41d7c26 100644
--- a/include/asm-ia64/byteorder.h
+++ b/arch/ia64/include/asm/byteorder.h
diff --git a/include/asm-ia64/cache.h b/arch/ia64/include/asm/cache.h
index e7482bd628f..e7482bd628f 100644
--- a/include/asm-ia64/cache.h
+++ b/arch/ia64/include/asm/cache.h
diff --git a/include/asm-ia64/cacheflush.h b/arch/ia64/include/asm/cacheflush.h
index afcfbda76e2..afcfbda76e2 100644
--- a/include/asm-ia64/cacheflush.h
+++ b/arch/ia64/include/asm/cacheflush.h
diff --git a/include/asm-ia64/checksum.h b/arch/ia64/include/asm/checksum.h
index 97af155057e..97af155057e 100644
--- a/include/asm-ia64/checksum.h
+++ b/arch/ia64/include/asm/checksum.h
diff --git a/include/asm-ia64/compat.h b/arch/ia64/include/asm/compat.h
index dfcf75b8426..dfcf75b8426 100644
--- a/include/asm-ia64/compat.h
+++ b/arch/ia64/include/asm/compat.h
diff --git a/include/asm-ia64/cpu.h b/arch/ia64/include/asm/cpu.h
index fcca30b9f11..fcca30b9f11 100644
--- a/include/asm-ia64/cpu.h
+++ b/arch/ia64/include/asm/cpu.h
diff --git a/include/asm-ia64/cputime.h b/arch/ia64/include/asm/cputime.h
index f9abdec6577..d20b998cb91 100644
--- a/include/asm-ia64/cputime.h
+++ b/arch/ia64/include/asm/cputime.h
@@ -1,6 +1,5 @@
 /*
- * include/asm-ia64/cputime.h:
- *		Definitions for measuring cputime on ia64 machines.
+ * Definitions for measuring cputime on ia64 machines.
  *
  * Based on <asm-powerpc/cputime.h>.
  *
diff --git a/include/asm-ia64/current.h b/arch/ia64/include/asm/current.h
index c659f90fbfd..c659f90fbfd 100644
--- a/include/asm-ia64/current.h
+++ b/arch/ia64/include/asm/current.h
diff --git a/include/asm-ia64/cyclone.h b/arch/ia64/include/asm/cyclone.h
index 88f6500e84a..88f6500e84a 100644
--- a/include/asm-ia64/cyclone.h
+++ b/arch/ia64/include/asm/cyclone.h
diff --git a/include/asm-ia64/delay.h b/arch/ia64/include/asm/delay.h
index a30a62f235e..a30a62f235e 100644
--- a/include/asm-ia64/delay.h
+++ b/arch/ia64/include/asm/delay.h
diff --git a/include/asm-ia64/device.h b/arch/ia64/include/asm/device.h
index 3db6daf7f25..3db6daf7f25 100644
--- a/include/asm-ia64/device.h
+++ b/arch/ia64/include/asm/device.h
diff --git a/include/asm-ia64/div64.h b/arch/ia64/include/asm/div64.h
index 6cd978cefb2..6cd978cefb2 100644
--- a/include/asm-ia64/div64.h
+++ b/arch/ia64/include/asm/div64.h
diff --git a/include/asm-ia64/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 9f0df9bd46b..9f0df9bd46b 100644
--- a/include/asm-ia64/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
diff --git a/include/asm-ia64/dma.h b/arch/ia64/include/asm/dma.h
index 4d97f60f1ef..4d97f60f1ef 100644
--- a/include/asm-ia64/dma.h
+++ b/arch/ia64/include/asm/dma.h
diff --git a/include/asm-ia64/dmi.h b/arch/ia64/include/asm/dmi.h
index 00eb1b130b6..00eb1b130b6 100644
--- a/include/asm-ia64/dmi.h
+++ b/arch/ia64/include/asm/dmi.h
diff --git a/include/asm-ia64/elf.h b/arch/ia64/include/asm/elf.h
index 5e0c1a6bce8..2acb6b6543c 100644
--- a/include/asm-ia64/elf.h
+++ b/arch/ia64/include/asm/elf.h
@@ -266,4 +266,19 @@ do {									\
 	}								\
 } while (0)
 
+/*
+ * format for entries in the Global Offset Table
+ */
+struct got_entry {
+	uint64_t val;
+};
+
+/*
+ * Layout of the Function Descriptor
+ */
+struct fdesc {
+	uint64_t ip;
+	uint64_t gp;
+};
+
 #endif /* _ASM_IA64_ELF_H */
diff --git a/include/asm-ia64/emergency-restart.h b/arch/ia64/include/asm/emergency-restart.h
index 108d8c48e42..108d8c48e42 100644
--- a/include/asm-ia64/emergency-restart.h
+++ b/arch/ia64/include/asm/emergency-restart.h
diff --git a/include/asm-ia64/errno.h b/arch/ia64/include/asm/errno.h
index 4c82b503d92..4c82b503d92 100644
--- a/include/asm-ia64/errno.h
+++ b/arch/ia64/include/asm/errno.h
diff --git a/include/asm-ia64/esi.h b/arch/ia64/include/asm/esi.h
index 40991c6ba64..40991c6ba64 100644
--- a/include/asm-ia64/esi.h
+++ b/arch/ia64/include/asm/esi.h
diff --git a/include/asm-ia64/fb.h b/arch/ia64/include/asm/fb.h
index 89a397cee90..89a397cee90 100644
--- a/include/asm-ia64/fb.h
+++ b/arch/ia64/include/asm/fb.h
diff --git a/include/asm-ia64/fcntl.h b/arch/ia64/include/asm/fcntl.h
index 1dd275dc8f6..1dd275dc8f6 100644
--- a/include/asm-ia64/fcntl.h
+++ b/arch/ia64/include/asm/fcntl.h
diff --git a/include/asm-ia64/fpswa.h b/arch/ia64/include/asm/fpswa.h
index 62edfceadaa..62edfceadaa 100644
--- a/include/asm-ia64/fpswa.h
+++ b/arch/ia64/include/asm/fpswa.h
diff --git a/include/asm-ia64/fpu.h b/arch/ia64/include/asm/fpu.h
index 3859558ff0a..3859558ff0a 100644
--- a/include/asm-ia64/fpu.h
+++ b/arch/ia64/include/asm/fpu.h
diff --git a/include/asm-ia64/futex.h b/arch/ia64/include/asm/futex.h
index c7f0f062239..c7f0f062239 100644
--- a/include/asm-ia64/futex.h
+++ b/arch/ia64/include/asm/futex.h
diff --git a/include/asm-ia64/gcc_intrin.h b/arch/ia64/include/asm/gcc_intrin.h
index 0f5b5592175..0f5b5592175 100644
--- a/include/asm-ia64/gcc_intrin.h
+++ b/arch/ia64/include/asm/gcc_intrin.h
diff --git a/include/asm-ia64/hardirq.h b/arch/ia64/include/asm/hardirq.h
index 140e495b8e0..140e495b8e0 100644
--- a/include/asm-ia64/hardirq.h
+++ b/arch/ia64/include/asm/hardirq.h
diff --git a/include/asm-ia64/hpsim.h b/arch/ia64/include/asm/hpsim.h
index 892ab198a9d..892ab198a9d 100644
--- a/include/asm-ia64/hpsim.h
+++ b/arch/ia64/include/asm/hpsim.h
diff --git a/include/asm-ia64/hugetlb.h b/arch/ia64/include/asm/hugetlb.h
index da55c63728e..da55c63728e 100644
--- a/include/asm-ia64/hugetlb.h
+++ b/arch/ia64/include/asm/hugetlb.h
diff --git a/include/asm-ia64/hw_irq.h b/arch/ia64/include/asm/hw_irq.h
index 5c99cbcb8a0..5c99cbcb8a0 100644
--- a/include/asm-ia64/hw_irq.h
+++ b/arch/ia64/include/asm/hw_irq.h
diff --git a/include/asm-ia64/ia32.h b/arch/ia64/include/asm/ia32.h
index 2390ee145aa..2390ee145aa 100644
--- a/include/asm-ia64/ia32.h
+++ b/arch/ia64/include/asm/ia32.h
diff --git a/include/asm-ia64/ia64regs.h b/arch/ia64/include/asm/ia64regs.h
index 1757f1c11ad..1757f1c11ad 100644
--- a/include/asm-ia64/ia64regs.h
+++ b/arch/ia64/include/asm/ia64regs.h
diff --git a/include/asm-ia64/intel_intrin.h b/arch/ia64/include/asm/intel_intrin.h
index 53cec577558..53cec577558 100644
--- a/include/asm-ia64/intel_intrin.h
+++ b/arch/ia64/include/asm/intel_intrin.h
diff --git a/include/asm-ia64/intrinsics.h b/arch/ia64/include/asm/intrinsics.h
index 47d686dba1e..47d686dba1e 100644
--- a/include/asm-ia64/intrinsics.h
+++ b/arch/ia64/include/asm/intrinsics.h
diff --git a/include/asm-ia64/io.h b/arch/ia64/include/asm/io.h
index 260a85ac9d6..7f257507cd8 100644
--- a/include/asm-ia64/io.h
+++ b/arch/ia64/include/asm/io.h
@@ -19,6 +19,8 @@
  * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
  */
 
+#include <asm/unaligned.h>
+
 /* We don't use IO slowdowns on the ia64, but.. */
 #define __SLOW_DOWN_IO	do { } while (0)
 #define SLOW_DOWN_IO	do { } while (0)
@@ -241,7 +243,7 @@ __insw (unsigned long port, void *dst, unsigned long count)
 	unsigned short *dp = dst;
 
 	while (count--)
-		*dp++ = platform_inw(port);
+		put_unaligned(platform_inw(port), dp++);
 }
 
 static inline void
@@ -250,7 +252,7 @@ __insl (unsigned long port, void *dst, unsigned long count)
 	unsigned int *dp = dst;
 
 	while (count--)
-		*dp++ = platform_inl(port);
+		put_unaligned(platform_inl(port), dp++);
 }
 
 static inline void
@@ -268,7 +270,7 @@ __outsw (unsigned long port, const void *src, unsigned long count)
 	const unsigned short *sp = src;
 
 	while (count--)
-		platform_outw(*sp++, port);
+		platform_outw(get_unaligned(sp++), port);
 }
 
 static inline void
@@ -277,7 +279,7 @@ __outsl (unsigned long port, const void *src, unsigned long count)
 	const unsigned int *sp = src;
 
 	while (count--)
-		platform_outl(*sp++, port);
+		platform_outl(get_unaligned(sp++), port);
 }
 
 /*
diff --git a/include/asm-ia64/ioctl.h b/arch/ia64/include/asm/ioctl.h
index b279fe06dfe..b279fe06dfe 100644
--- a/include/asm-ia64/ioctl.h
+++ b/arch/ia64/include/asm/ioctl.h
diff --git a/include/asm-ia64/ioctls.h b/arch/ia64/include/asm/ioctls.h
index f41b636a0bf..f41b636a0bf 100644
--- a/include/asm-ia64/ioctls.h
+++ b/arch/ia64/include/asm/ioctls.h
diff --git a/include/asm-ia64/iosapic.h b/arch/ia64/include/asm/iosapic.h
index b9c102e15f2..b9c102e15f2 100644
--- a/include/asm-ia64/iosapic.h
+++ b/arch/ia64/include/asm/iosapic.h
diff --git a/include/asm-ia64/ipcbuf.h b/arch/ia64/include/asm/ipcbuf.h
index 079899ae7d3..079899ae7d3 100644
--- a/include/asm-ia64/ipcbuf.h
+++ b/arch/ia64/include/asm/ipcbuf.h
diff --git a/include/asm-ia64/irq.h b/arch/ia64/include/asm/irq.h
index 3627116fb0e..3627116fb0e 100644
--- a/include/asm-ia64/irq.h
+++ b/arch/ia64/include/asm/irq.h
diff --git a/include/asm-ia64/irq_regs.h b/arch/ia64/include/asm/irq_regs.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-ia64/irq_regs.h
+++ b/arch/ia64/include/asm/irq_regs.h
diff --git a/include/asm-ia64/kdebug.h b/arch/ia64/include/asm/kdebug.h
index 35e49407d06..d11a6985503 100644
--- a/include/asm-ia64/kdebug.h
+++ b/arch/ia64/include/asm/kdebug.h
@@ -1,8 +1,6 @@
 #ifndef _IA64_KDEBUG_H
 #define _IA64_KDEBUG_H 1
 /*
- * include/asm-ia64/kdebug.h
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/include/asm-ia64/kexec.h b/arch/ia64/include/asm/kexec.h
index 541be835fc5..e1d58f819d7 100644
--- a/include/asm-ia64/kexec.h
+++ b/arch/ia64/include/asm/kexec.h
@@ -9,7 +9,7 @@
 /* Maximum address we can use for the control code buffer */
 #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
 
-#define KEXEC_CONTROL_CODE_SIZE (8192 + 8192 + 4096)
+#define KEXEC_CONTROL_PAGE_SIZE (8192 + 8192 + 4096)
 
 /* The native architecture */
 #define KEXEC_ARCH KEXEC_ARCH_IA_64
diff --git a/include/asm-ia64/kmap_types.h b/arch/ia64/include/asm/kmap_types.h
index 5d1658aa2b3..5d1658aa2b3 100644
--- a/include/asm-ia64/kmap_types.h
+++ b/arch/ia64/include/asm/kmap_types.h
diff --git a/include/asm-ia64/kprobes.h b/arch/ia64/include/asm/kprobes.h
index ef71b57fc2f..dbf83fb28db 100644
--- a/include/asm-ia64/kprobes.h
+++ b/arch/ia64/include/asm/kprobes.h
@@ -2,7 +2,6 @@
 #define _ASM_KPROBES_H
 /*
  *  Kernel Probes (KProbes)
- *  include/asm-ia64/kprobes.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/include/asm-ia64/kregs.h b/arch/ia64/include/asm/kregs.h
index aefcdfee7f2..aefcdfee7f2 100644
--- a/include/asm-ia64/kregs.h
+++ b/arch/ia64/include/asm/kregs.h
diff --git a/include/asm-ia64/kvm.h b/arch/ia64/include/asm/kvm.h
index 3f6a090cbd9..f38472ac226 100644
--- a/include/asm-ia64/kvm.h
+++ b/arch/ia64/include/asm/kvm.h
@@ -2,7 +2,7 @@
 #define __ASM_IA64_KVM_H
 
 /*
- * asm-ia64/kvm.h: kvm structure definitions  for ia64
+ * kvm structure definitions  for ia64
  *
  * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
  *
diff --git a/include/asm-ia64/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 1efe513a994..1efe513a994 100644
--- a/include/asm-ia64/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
diff --git a/include/asm-ia64/kvm_para.h b/arch/ia64/include/asm/kvm_para.h
index 9f9796bb344..0d6d8ca07b8 100644
--- a/include/asm-ia64/kvm_para.h
+++ b/arch/ia64/include/asm/kvm_para.h
@@ -2,8 +2,6 @@
 #define __IA64_KVM_PARA_H
 
 /*
- * asm-ia64/kvm_para.h
- *
  * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
  *
  * This program is free software; you can redistribute it and/or modify it
diff --git a/include/asm-ia64/libata-portmap.h b/arch/ia64/include/asm/libata-portmap.h
index 0e00c9a9f41..0e00c9a9f41 100644
--- a/include/asm-ia64/libata-portmap.h
+++ b/arch/ia64/include/asm/libata-portmap.h
diff --git a/include/asm-ia64/linkage.h b/arch/ia64/include/asm/linkage.h
index ef22a45c189..ef22a45c189 100644
--- a/include/asm-ia64/linkage.h
+++ b/arch/ia64/include/asm/linkage.h
diff --git a/include/asm-ia64/local.h b/arch/ia64/include/asm/local.h
index c11c530f74d..c11c530f74d 100644
--- a/include/asm-ia64/local.h
+++ b/arch/ia64/include/asm/local.h
diff --git a/include/asm-ia64/machvec.h b/arch/ia64/include/asm/machvec.h
index a6d50c77b6b..2b850ccafef 100644
--- a/include/asm-ia64/machvec.h
+++ b/arch/ia64/include/asm/machvec.h
@@ -290,7 +290,7 @@ extern void machvec_init (const char *name);
 extern void machvec_init_from_cmdline(const char *cmdline);
 
 # else
-#  error Unknown configuration.  Update asm-ia64/machvec.h.
+#  error Unknown configuration.  Update arch/ia64/include/asm/machvec.h.
 # endif /* CONFIG_IA64_GENERIC */
 
 /*
diff --git a/include/asm-ia64/machvec_dig.h b/arch/ia64/include/asm/machvec_dig.h
index 8a0752f4098..8a0752f4098 100644
--- a/include/asm-ia64/machvec_dig.h
+++ b/arch/ia64/include/asm/machvec_dig.h
diff --git a/include/asm-ia64/machvec_hpsim.h b/arch/ia64/include/asm/machvec_hpsim.h
index cf72fc87fdf..cf72fc87fdf 100644
--- a/include/asm-ia64/machvec_hpsim.h
+++ b/arch/ia64/include/asm/machvec_hpsim.h
diff --git a/include/asm-ia64/machvec_hpzx1.h b/arch/ia64/include/asm/machvec_hpzx1.h
index 2f57f5144b9..2f57f5144b9 100644
--- a/include/asm-ia64/machvec_hpzx1.h
+++ b/arch/ia64/include/asm/machvec_hpzx1.h
diff --git a/include/asm-ia64/machvec_hpzx1_swiotlb.h b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
index a842cdda827..a842cdda827 100644
--- a/include/asm-ia64/machvec_hpzx1_swiotlb.h
+++ b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
diff --git a/include/asm-ia64/machvec_init.h b/arch/ia64/include/asm/machvec_init.h
index 7f21249fba3..7f21249fba3 100644
--- a/include/asm-ia64/machvec_init.h
+++ b/arch/ia64/include/asm/machvec_init.h
diff --git a/include/asm-ia64/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h
index 781308ea7b8..781308ea7b8 100644
--- a/include/asm-ia64/machvec_sn2.h
+++ b/arch/ia64/include/asm/machvec_sn2.h
diff --git a/include/asm-ia64/machvec_uv.h b/arch/ia64/include/asm/machvec_uv.h
index 2931447f381..2931447f381 100644
--- a/include/asm-ia64/machvec_uv.h
+++ b/arch/ia64/include/asm/machvec_uv.h
diff --git a/include/asm-ia64/mc146818rtc.h b/arch/ia64/include/asm/mc146818rtc.h
index 407787a237b..407787a237b 100644
--- a/include/asm-ia64/mc146818rtc.h
+++ b/arch/ia64/include/asm/mc146818rtc.h
diff --git a/include/asm-ia64/mca.h b/arch/ia64/include/asm/mca.h
index 18a4321349a..18a4321349a 100644
--- a/include/asm-ia64/mca.h
+++ b/arch/ia64/include/asm/mca.h
diff --git a/include/asm-ia64/mca_asm.h b/arch/ia64/include/asm/mca_asm.h
index dd2a5b13439..dd2a5b13439 100644
--- a/include/asm-ia64/mca_asm.h
+++ b/arch/ia64/include/asm/mca_asm.h
diff --git a/include/asm-ia64/meminit.h b/arch/ia64/include/asm/meminit.h
index 7245a578159..7245a578159 100644
--- a/include/asm-ia64/meminit.h
+++ b/arch/ia64/include/asm/meminit.h
diff --git a/include/asm-ia64/mman.h b/arch/ia64/include/asm/mman.h
index c73b87832a1..c73b87832a1 100644
--- a/include/asm-ia64/mman.h
+++ b/arch/ia64/include/asm/mman.h
diff --git a/include/asm-ia64/mmu.h b/arch/ia64/include/asm/mmu.h
index 611432ba579..611432ba579 100644
--- a/include/asm-ia64/mmu.h
+++ b/arch/ia64/include/asm/mmu.h
diff --git a/include/asm-ia64/mmu_context.h b/arch/ia64/include/asm/mmu_context.h
index 040bc87db93..040bc87db93 100644
--- a/include/asm-ia64/mmu_context.h
+++ b/arch/ia64/include/asm/mmu_context.h
diff --git a/include/asm-ia64/mmzone.h b/arch/ia64/include/asm/mmzone.h
index 34efe88eb84..34efe88eb84 100644
--- a/include/asm-ia64/mmzone.h
+++ b/arch/ia64/include/asm/mmzone.h
diff --git a/include/asm-ia64/module.h b/arch/ia64/include/asm/module.h
index d2da61e4c49..d2da61e4c49 100644
--- a/include/asm-ia64/module.h
+++ b/arch/ia64/include/asm/module.h
diff --git a/include/asm-ia64/msgbuf.h b/arch/ia64/include/asm/msgbuf.h
index 6c64c0d2aae..6c64c0d2aae 100644
--- a/include/asm-ia64/msgbuf.h
+++ b/arch/ia64/include/asm/msgbuf.h
diff --git a/include/asm-ia64/mutex.h b/arch/ia64/include/asm/mutex.h
index bed73a643a5..bed73a643a5 100644
--- a/include/asm-ia64/mutex.h
+++ b/arch/ia64/include/asm/mutex.h
diff --git a/include/asm-ia64/native/inst.h b/arch/ia64/include/asm/native/inst.h
index c953a2ca4fc..c8efbf7b849 100644
--- a/include/asm-ia64/native/inst.h
+++ b/arch/ia64/include/asm/native/inst.h
@@ -1,5 +1,5 @@
 /******************************************************************************
- * include/asm-ia64/native/inst.h
+ * arch/ia64/include/asm/native/inst.h
  *
  * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
  *                    VA Linux Systems Japan K.K.
diff --git a/include/asm-ia64/native/irq.h b/arch/ia64/include/asm/native/irq.h
index efe9ff74a3c..887a228e2ed 100644
--- a/include/asm-ia64/native/irq.h
+++ b/arch/ia64/include/asm/native/irq.h
@@ -1,5 +1,5 @@
 /******************************************************************************
- * include/asm-ia64/native/irq.h
+ * arch/ia64/include/asm/native/irq.h
  *
  * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
  *                    VA Linux Systems Japan K.K.
@@ -17,8 +17,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * moved from linux/include/asm-ia64/irq.h.
  */
 
 #ifndef _ASM_IA64_NATIVE_IRQ_H
diff --git a/include/asm-ia64/nodedata.h b/arch/ia64/include/asm/nodedata.h
index 2fb337b0e9b..2fb337b0e9b 100644
--- a/include/asm-ia64/nodedata.h
+++ b/arch/ia64/include/asm/nodedata.h
diff --git a/include/asm-ia64/numa.h b/arch/ia64/include/asm/numa.h
index 3499ff57bf4..3499ff57bf4 100644
--- a/include/asm-ia64/numa.h
+++ b/arch/ia64/include/asm/numa.h
diff --git a/include/asm-ia64/page.h b/arch/ia64/include/asm/page.h
index 5f271bc712e..5f271bc712e 100644
--- a/include/asm-ia64/page.h
+++ b/arch/ia64/include/asm/page.h
diff --git a/include/asm-ia64/pal.h b/arch/ia64/include/asm/pal.h
index 67b02901ead..67b02901ead 100644
--- a/include/asm-ia64/pal.h
+++ b/arch/ia64/include/asm/pal.h
diff --git a/include/asm-ia64/param.h b/arch/ia64/include/asm/param.h
index 0964c32c135..0964c32c135 100644
--- a/include/asm-ia64/param.h
+++ b/arch/ia64/include/asm/param.h
diff --git a/include/asm-ia64/paravirt.h b/arch/ia64/include/asm/paravirt.h
index 1b4df129f57..660cab04483 100644
--- a/include/asm-ia64/paravirt.h
+++ b/arch/ia64/include/asm/paravirt.h
@@ -1,6 +1,4 @@
 /******************************************************************************
- * include/asm-ia64/paravirt.h
- *
  * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
  *                    VA Linux Systems Japan K.K.
  *
diff --git a/include/asm-ia64/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h
index 52482e6940a..d577aac1183 100644
--- a/include/asm-ia64/paravirt_privop.h
+++ b/arch/ia64/include/asm/paravirt_privop.h
@@ -1,6 +1,4 @@
 /******************************************************************************
- * include/asm-ia64/paravirt_privops.h
- *
  * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
  *                    VA Linux Systems Japan K.K.
  *
diff --git a/include/asm-ia64/parport.h b/arch/ia64/include/asm/parport.h
index 67e16adfcd2..67e16adfcd2 100644
--- a/include/asm-ia64/parport.h
+++ b/arch/ia64/include/asm/parport.h
diff --git a/include/asm-ia64/patch.h b/arch/ia64/include/asm/patch.h
index 295fe6ab458..295fe6ab458 100644
--- a/include/asm-ia64/patch.h
+++ b/arch/ia64/include/asm/patch.h
diff --git a/include/asm-ia64/pci.h b/arch/ia64/include/asm/pci.h
index 0149097b736..0149097b736 100644
--- a/include/asm-ia64/pci.h
+++ b/arch/ia64/include/asm/pci.h
diff --git a/include/asm-ia64/percpu.h b/arch/ia64/include/asm/percpu.h
index 77f30b664b4..77f30b664b4 100644
--- a/include/asm-ia64/percpu.h
+++ b/arch/ia64/include/asm/percpu.h
diff --git a/include/asm-ia64/perfmon.h b/arch/ia64/include/asm/perfmon.h
index 7f3333dd00e..7f3333dd00e 100644
--- a/include/asm-ia64/perfmon.h
+++ b/arch/ia64/include/asm/perfmon.h
diff --git a/include/asm-ia64/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h
index 48822c0811d..48822c0811d 100644
--- a/include/asm-ia64/perfmon_default_smpl.h
+++ b/arch/ia64/include/asm/perfmon_default_smpl.h
diff --git a/include/asm-ia64/pgalloc.h b/arch/ia64/include/asm/pgalloc.h
index b9ac1a6fc21..b9ac1a6fc21 100644
--- a/include/asm-ia64/pgalloc.h
+++ b/arch/ia64/include/asm/pgalloc.h
diff --git a/include/asm-ia64/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 7a9bff47564..7a9bff47564 100644
--- a/include/asm-ia64/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
diff --git a/include/asm-ia64/poll.h b/arch/ia64/include/asm/poll.h
index c98509d3149..c98509d3149 100644
--- a/include/asm-ia64/poll.h
+++ b/arch/ia64/include/asm/poll.h
diff --git a/include/asm-ia64/posix_types.h b/arch/ia64/include/asm/posix_types.h
index 17885567b73..17885567b73 100644
--- a/include/asm-ia64/posix_types.h
+++ b/arch/ia64/include/asm/posix_types.h
diff --git a/include/asm-ia64/processor.h b/arch/ia64/include/asm/processor.h
index f88fa054d01..f88fa054d01 100644
--- a/include/asm-ia64/processor.h
+++ b/arch/ia64/include/asm/processor.h
diff --git a/include/asm-ia64/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 15f8dcfe6ee..15f8dcfe6ee 100644
--- a/include/asm-ia64/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
diff --git a/include/asm-ia64/ptrace_offsets.h b/arch/ia64/include/asm/ptrace_offsets.h
index b712773c759..b712773c759 100644
--- a/include/asm-ia64/ptrace_offsets.h
+++ b/arch/ia64/include/asm/ptrace_offsets.h
diff --git a/include/asm-ia64/resource.h b/arch/ia64/include/asm/resource.h
index ba2272a87fc..ba2272a87fc 100644
--- a/include/asm-ia64/resource.h
+++ b/arch/ia64/include/asm/resource.h
diff --git a/include/asm-ia64/rse.h b/arch/ia64/include/asm/rse.h
index 02830a3b019..02830a3b019 100644
--- a/include/asm-ia64/rse.h
+++ b/arch/ia64/include/asm/rse.h
diff --git a/include/asm-ia64/rwsem.h b/arch/ia64/include/asm/rwsem.h
index 8aba06a7b03..fbee74b1578 100644
--- a/include/asm-ia64/rwsem.h
+++ b/arch/ia64/include/asm/rwsem.h
@@ -1,5 +1,5 @@
 /*
- * asm-ia64/rwsem.h: R/W semaphores for ia64
+ * R/W semaphores for ia64
  *
  * Copyright (C) 2003 Ken Chen <kenneth.w.chen@intel.com>
  * Copyright (C) 2003 Asit Mallick <asit.k.mallick@intel.com>
diff --git a/include/asm-ia64/sal.h b/arch/ia64/include/asm/sal.h
index 89594b442f8..ea310c0812a 100644
--- a/include/asm-ia64/sal.h
+++ b/arch/ia64/include/asm/sal.h
@@ -236,7 +236,7 @@ extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
 
 extern unsigned short sal_revision;	/* supported SAL spec revision */
 extern unsigned short sal_version;	/* SAL version; OEM dependent */
-#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor))
+#define SAL_VERSION_CODE(major, minor) ((bin2bcd(major) << 8) | bin2bcd(minor))
 
 extern const char *ia64_sal_strerror (long status);
 extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);
diff --git a/include/asm-ia64/scatterlist.h b/arch/ia64/include/asm/scatterlist.h
index d6f57874041..d6f57874041 100644
--- a/include/asm-ia64/scatterlist.h
+++ b/arch/ia64/include/asm/scatterlist.h
diff --git a/include/asm-ia64/sections.h b/arch/ia64/include/asm/sections.h
index 7286e4a9fe8..f6679989103 100644
--- a/include/asm-ia64/sections.h
+++ b/arch/ia64/include/asm/sections.h
@@ -6,6 +6,8 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
+#include <linux/elf.h>
+#include <linux/uaccess.h>
 #include <asm-generic/sections.h>
 
 extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
@@ -21,5 +23,17 @@ extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_b
 extern char __start_unwind[], __end_unwind[];
 extern char __start_ivt_text[], __end_ivt_text[];
 
+#undef dereference_function_descriptor
+static inline void *dereference_function_descriptor(void *ptr)
+{
+	struct fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->ip, p))
+		ptr = p;
+	return ptr;
+}
+
+
 #endif /* _ASM_IA64_SECTIONS_H */
 
diff --git a/include/asm-ia64/segment.h b/arch/ia64/include/asm/segment.h
index b89e2b3d648..b89e2b3d648 100644
--- a/include/asm-ia64/segment.h
+++ b/arch/ia64/include/asm/segment.h
diff --git a/include/asm-ia64/sembuf.h b/arch/ia64/include/asm/sembuf.h
index 1340fbc04d3..1340fbc04d3 100644
--- a/include/asm-ia64/sembuf.h
+++ b/arch/ia64/include/asm/sembuf.h
diff --git a/include/asm-ia64/serial.h b/arch/ia64/include/asm/serial.h
index 0c7a2f3dcf1..068be11583d 100644
--- a/include/asm-ia64/serial.h
+++ b/arch/ia64/include/asm/serial.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-ia64/serial.h
- *
  * Derived from the i386 version.
  */
 
diff --git a/include/asm-ia64/setup.h b/arch/ia64/include/asm/setup.h
index 4399a44355b..4399a44355b 100644
--- a/include/asm-ia64/setup.h
+++ b/arch/ia64/include/asm/setup.h
diff --git a/include/asm-ia64/shmbuf.h b/arch/ia64/include/asm/shmbuf.h
index 585002a77ac..585002a77ac 100644
--- a/include/asm-ia64/shmbuf.h
+++ b/arch/ia64/include/asm/shmbuf.h
diff --git a/include/asm-ia64/shmparam.h b/arch/ia64/include/asm/shmparam.h
index d07508dc54a..d07508dc54a 100644
--- a/include/asm-ia64/shmparam.h
+++ b/arch/ia64/include/asm/shmparam.h
diff --git a/include/asm-ia64/sigcontext.h b/arch/ia64/include/asm/sigcontext.h
index 57ff777bcc4..57ff777bcc4 100644
--- a/include/asm-ia64/sigcontext.h
+++ b/arch/ia64/include/asm/sigcontext.h
diff --git a/include/asm-ia64/siginfo.h b/arch/ia64/include/asm/siginfo.h
index 9294e4b0c8b..9294e4b0c8b 100644
--- a/include/asm-ia64/siginfo.h
+++ b/arch/ia64/include/asm/siginfo.h
diff --git a/include/asm-ia64/signal.h b/arch/ia64/include/asm/signal.h
index 4f5ca5643cb..4f5ca5643cb 100644
--- a/include/asm-ia64/signal.h
+++ b/arch/ia64/include/asm/signal.h
diff --git a/include/asm-ia64/smp.h b/arch/ia64/include/asm/smp.h
index 12d96e0cd51..12d96e0cd51 100644
--- a/include/asm-ia64/smp.h
+++ b/arch/ia64/include/asm/smp.h
diff --git a/include/asm-ia64/sn/acpi.h b/arch/ia64/include/asm/sn/acpi.h
index 9ce2801cbd5..9ce2801cbd5 100644
--- a/include/asm-ia64/sn/acpi.h
+++ b/arch/ia64/include/asm/sn/acpi.h
diff --git a/include/asm-ia64/sn/addrs.h b/arch/ia64/include/asm/sn/addrs.h
index e715c794b18..e715c794b18 100644
--- a/include/asm-ia64/sn/addrs.h
+++ b/arch/ia64/include/asm/sn/addrs.h
diff --git a/include/asm-ia64/sn/arch.h b/arch/ia64/include/asm/sn/arch.h
index 7caa1f44cd9..7caa1f44cd9 100644
--- a/include/asm-ia64/sn/arch.h
+++ b/arch/ia64/include/asm/sn/arch.h
diff --git a/include/asm-ia64/sn/bte.h b/arch/ia64/include/asm/sn/bte.h
index a0d214f4311..5efecf06c9a 100644
--- a/include/asm-ia64/sn/bte.h
+++ b/arch/ia64/include/asm/sn/bte.h
@@ -223,10 +223,11 @@ extern void bte_error_handler(unsigned long);
  * until the transfer is complete.  In order to get the asynch
  * version of bte_copy, you must perform this check yourself.
  */
-#define BTE_UNALIGNED_COPY(src, dest, len, mode)                        \
-	(((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) ||             \
-	  (dest & L1_CACHE_MASK)) ?                                     \
-	 bte_unaligned_copy(src, dest, len, mode) :              	\
+#define BTE_UNALIGNED_COPY(src, dest, len, mode)			\
+	(((len & (L1_CACHE_BYTES - 1)) ||				\
+	  (src & (L1_CACHE_BYTES - 1)) ||				\
+	  (dest & (L1_CACHE_BYTES - 1))) ?				\
+	 bte_unaligned_copy(src, dest, len, mode) :			\
 	 bte_copy(src, dest, len, mode, NULL))
 
 
diff --git a/include/asm-ia64/sn/clksupport.h b/arch/ia64/include/asm/sn/clksupport.h
index d340c365a82..d340c365a82 100644
--- a/include/asm-ia64/sn/clksupport.h
+++ b/arch/ia64/include/asm/sn/clksupport.h
diff --git a/include/asm-ia64/sn/geo.h b/arch/ia64/include/asm/sn/geo.h
index f083c943406..f083c943406 100644
--- a/include/asm-ia64/sn/geo.h
+++ b/arch/ia64/include/asm/sn/geo.h
diff --git a/include/asm-ia64/sn/intr.h b/arch/ia64/include/asm/sn/intr.h
index e0487aa9741..e0487aa9741 100644
--- a/include/asm-ia64/sn/intr.h
+++ b/arch/ia64/include/asm/sn/intr.h
diff --git a/include/asm-ia64/sn/io.h b/arch/ia64/include/asm/sn/io.h
index 41c73a73562..41c73a73562 100644
--- a/include/asm-ia64/sn/io.h
+++ b/arch/ia64/include/asm/sn/io.h
diff --git a/include/asm-ia64/sn/ioc3.h b/arch/ia64/include/asm/sn/ioc3.h
index 95ed6cc83cf..95ed6cc83cf 100644
--- a/include/asm-ia64/sn/ioc3.h
+++ b/arch/ia64/include/asm/sn/ioc3.h
diff --git a/include/asm-ia64/sn/klconfig.h b/arch/ia64/include/asm/sn/klconfig.h
index bcbf209d63b..bcbf209d63b 100644
--- a/include/asm-ia64/sn/klconfig.h
+++ b/arch/ia64/include/asm/sn/klconfig.h
diff --git a/include/asm-ia64/sn/l1.h b/arch/ia64/include/asm/sn/l1.h
index 344bf44bb35..344bf44bb35 100644
--- a/include/asm-ia64/sn/l1.h
+++ b/arch/ia64/include/asm/sn/l1.h
diff --git a/include/asm-ia64/sn/leds.h b/arch/ia64/include/asm/sn/leds.h
index 66cf8c4d92c..66cf8c4d92c 100644
--- a/include/asm-ia64/sn/leds.h
+++ b/arch/ia64/include/asm/sn/leds.h
diff --git a/include/asm-ia64/sn/module.h b/arch/ia64/include/asm/sn/module.h
index 734e980ece2..734e980ece2 100644
--- a/include/asm-ia64/sn/module.h
+++ b/arch/ia64/include/asm/sn/module.h
diff --git a/include/asm-ia64/sn/mspec.h b/arch/ia64/include/asm/sn/mspec.h
index dbe13c6121a..c1d3c50c322 100644
--- a/include/asm-ia64/sn/mspec.h
+++ b/arch/ia64/include/asm/sn/mspec.h
@@ -4,7 +4,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2001-2008 Silicon Graphics, Inc.  All rights reserved.
  */
 
 #ifndef _ASM_IA64_SN_MSPEC_H
@@ -32,26 +32,26 @@
 #ifdef __KERNEL__
 
 /*
- * Each Atomic Memory Operation (AMO formerly known as fetchop)
+ * Each Atomic Memory Operation (amo, formerly known as fetchop)
  * variable is 64 bytes long.  The first 8 bytes are used.  The
  * remaining 56 bytes are unaddressable due to the operation taking
  * that portion of the address.
  *
- * NOTE: The AMO_t _MUST_ be placed in either the first or second half
- * of the cache line.  The cache line _MUST NOT_ be used for anything
- * other than additional AMO_t entries.  This is because there are two
+ * NOTE: The amo structure _MUST_ be placed in either the first or second
+ * half of the cache line.  The cache line _MUST NOT_ be used for anything
+ * other than additional amo entries.  This is because there are two
  * addresses which reference the same physical cache line.  One will
  * be a cached entry with the memory type bits all set.  This address
- * may be loaded into processor cache.  The AMO_t will be referenced
+ * may be loaded into processor cache.  The amo will be referenced
  * uncached via the memory special memory type.  If any portion of the
  * cached cache-line is modified, when that line is flushed, it will
  * overwrite the uncached value in physical memory and lead to
  * inconsistency.
  */
-typedef struct {
+struct amo {
         u64 variable;
         u64 unused[7];
-} AMO_t;
+};
 
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-ia64/sn/nodepda.h b/arch/ia64/include/asm/sn/nodepda.h
index ee118b901de..ee118b901de 100644
--- a/include/asm-ia64/sn/nodepda.h
+++ b/arch/ia64/include/asm/sn/nodepda.h
diff --git a/include/asm-ia64/sn/pcibr_provider.h b/arch/ia64/include/asm/sn/pcibr_provider.h
index da205b7cdaa..da205b7cdaa 100644
--- a/include/asm-ia64/sn/pcibr_provider.h
+++ b/arch/ia64/include/asm/sn/pcibr_provider.h
diff --git a/include/asm-ia64/sn/pcibus_provider_defs.h b/arch/ia64/include/asm/sn/pcibus_provider_defs.h
index 8f7c83d0f6d..8f7c83d0f6d 100644
--- a/include/asm-ia64/sn/pcibus_provider_defs.h
+++ b/arch/ia64/include/asm/sn/pcibus_provider_defs.h
diff --git a/include/asm-ia64/sn/pcidev.h b/arch/ia64/include/asm/sn/pcidev.h
index 1c2382cea80..1c2382cea80 100644
--- a/include/asm-ia64/sn/pcidev.h
+++ b/arch/ia64/include/asm/sn/pcidev.h
diff --git a/include/asm-ia64/sn/pda.h b/arch/ia64/include/asm/sn/pda.h
index 1c5108d44d8..1c5108d44d8 100644
--- a/include/asm-ia64/sn/pda.h
+++ b/arch/ia64/include/asm/sn/pda.h
diff --git a/include/asm-ia64/sn/pic.h b/arch/ia64/include/asm/sn/pic.h
index 5f9da5fd6e5..5f9da5fd6e5 100644
--- a/include/asm-ia64/sn/pic.h
+++ b/arch/ia64/include/asm/sn/pic.h
diff --git a/include/asm-ia64/sn/rw_mmr.h b/arch/ia64/include/asm/sn/rw_mmr.h
index 2d78f4c5a45..2d78f4c5a45 100644
--- a/include/asm-ia64/sn/rw_mmr.h
+++ b/arch/ia64/include/asm/sn/rw_mmr.h
diff --git a/include/asm-ia64/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h
index 7de1d1d4b71..7de1d1d4b71 100644
--- a/include/asm-ia64/sn/shub_mmr.h
+++ b/arch/ia64/include/asm/sn/shub_mmr.h
diff --git a/include/asm-ia64/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h
index 22a6f18a531..22a6f18a531 100644
--- a/include/asm-ia64/sn/shubio.h
+++ b/arch/ia64/include/asm/sn/shubio.h
diff --git a/include/asm-ia64/sn/simulator.h b/arch/ia64/include/asm/sn/simulator.h
index c2611f6cfe3..c2611f6cfe3 100644
--- a/include/asm-ia64/sn/simulator.h
+++ b/arch/ia64/include/asm/sn/simulator.h
diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h
index e61ebac38cd..e61ebac38cd 100644
--- a/include/asm-ia64/sn/sn2/sn_hwperf.h
+++ b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h
diff --git a/include/asm-ia64/sn/sn_cpuid.h b/arch/ia64/include/asm/sn/sn_cpuid.h
index a676dd9ace3..a676dd9ace3 100644
--- a/include/asm-ia64/sn/sn_cpuid.h
+++ b/arch/ia64/include/asm/sn/sn_cpuid.h
diff --git a/include/asm-ia64/sn/sn_feature_sets.h b/arch/ia64/include/asm/sn/sn_feature_sets.h
index 8e83ac117ac..8e83ac117ac 100644
--- a/include/asm-ia64/sn/sn_feature_sets.h
+++ b/arch/ia64/include/asm/sn/sn_feature_sets.h
diff --git a/include/asm-ia64/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h
index 676b31a08c6..57e649d388b 100644
--- a/include/asm-ia64/sn/sn_sal.h
+++ b/arch/ia64/include/asm/sn/sn_sal.h
@@ -1094,7 +1094,7 @@ ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift,
 /*
  * This is the access point to the Altix PROM hardware performance
  * and status monitoring interface. For info on using this, see
- * include/asm-ia64/sn/sn2/sn_hwperf.h
+ * arch/ia64/include/asm/sn/sn2/sn_hwperf.h
  */
 static inline int
 ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
diff --git a/include/asm-ia64/sn/tioca.h b/arch/ia64/include/asm/sn/tioca.h
index 666222d7f0f..666222d7f0f 100644
--- a/include/asm-ia64/sn/tioca.h
+++ b/arch/ia64/include/asm/sn/tioca.h
diff --git a/include/asm-ia64/sn/tioca_provider.h b/arch/ia64/include/asm/sn/tioca_provider.h
index 9a820ac61be..9a820ac61be 100644
--- a/include/asm-ia64/sn/tioca_provider.h
+++ b/arch/ia64/include/asm/sn/tioca_provider.h
diff --git a/include/asm-ia64/sn/tioce.h b/arch/ia64/include/asm/sn/tioce.h
index 893468e1b41..893468e1b41 100644
--- a/include/asm-ia64/sn/tioce.h
+++ b/arch/ia64/include/asm/sn/tioce.h
diff --git a/include/asm-ia64/sn/tioce_provider.h b/arch/ia64/include/asm/sn/tioce_provider.h
index 32c32f30b09..32c32f30b09 100644
--- a/include/asm-ia64/sn/tioce_provider.h
+++ b/arch/ia64/include/asm/sn/tioce_provider.h
diff --git a/include/asm-ia64/sn/tiocp.h b/arch/ia64/include/asm/sn/tiocp.h
index e8ad0bb5b6c..e8ad0bb5b6c 100644
--- a/include/asm-ia64/sn/tiocp.h
+++ b/arch/ia64/include/asm/sn/tiocp.h
diff --git a/include/asm-ia64/sn/tiocx.h b/arch/ia64/include/asm/sn/tiocx.h
index d29728492f3..d29728492f3 100644
--- a/include/asm-ia64/sn/tiocx.h
+++ b/arch/ia64/include/asm/sn/tiocx.h
diff --git a/include/asm-ia64/sn/types.h b/arch/ia64/include/asm/sn/types.h
index 8e04ee211e5..8e04ee211e5 100644
--- a/include/asm-ia64/sn/types.h
+++ b/arch/ia64/include/asm/sn/types.h
diff --git a/include/asm-ia64/socket.h b/arch/ia64/include/asm/socket.h
index d5ef0aa3e31..d5ef0aa3e31 100644
--- a/include/asm-ia64/socket.h
+++ b/arch/ia64/include/asm/socket.h
diff --git a/include/asm-ia64/sockios.h b/arch/ia64/include/asm/sockios.h
index 15c92468ad3..15c92468ad3 100644
--- a/include/asm-ia64/sockios.h
+++ b/arch/ia64/include/asm/sockios.h
diff --git a/include/asm-ia64/sparsemem.h b/arch/ia64/include/asm/sparsemem.h
index 67a7c40ec27..67a7c40ec27 100644
--- a/include/asm-ia64/sparsemem.h
+++ b/arch/ia64/include/asm/sparsemem.h
diff --git a/include/asm-ia64/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 0229fb95fb3..0229fb95fb3 100644
--- a/include/asm-ia64/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
diff --git a/include/asm-ia64/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h
index 474e46f1ab4..474e46f1ab4 100644
--- a/include/asm-ia64/spinlock_types.h
+++ b/arch/ia64/include/asm/spinlock_types.h
diff --git a/include/asm-ia64/stat.h b/arch/ia64/include/asm/stat.h
index 367bb90cdff..367bb90cdff 100644
--- a/include/asm-ia64/stat.h
+++ b/arch/ia64/include/asm/stat.h
diff --git a/include/asm-ia64/statfs.h b/arch/ia64/include/asm/statfs.h
index 811097974f3..811097974f3 100644
--- a/include/asm-ia64/statfs.h
+++ b/arch/ia64/include/asm/statfs.h
diff --git a/include/asm-ia64/string.h b/arch/ia64/include/asm/string.h
index 85fd65c52a8..85fd65c52a8 100644
--- a/include/asm-ia64/string.h
+++ b/arch/ia64/include/asm/string.h
diff --git a/include/asm-ia64/suspend.h b/arch/ia64/include/asm/suspend.h
index b05bbb6074e..b05bbb6074e 100644
--- a/include/asm-ia64/suspend.h
+++ b/arch/ia64/include/asm/suspend.h
diff --git a/include/asm-ia64/system.h b/arch/ia64/include/asm/system.h
index 927a381c20c..927a381c20c 100644
--- a/include/asm-ia64/system.h
+++ b/arch/ia64/include/asm/system.h
diff --git a/include/asm-ia64/termbits.h b/arch/ia64/include/asm/termbits.h
index 9f162e0089a..9f162e0089a 100644
--- a/include/asm-ia64/termbits.h
+++ b/arch/ia64/include/asm/termbits.h
diff --git a/include/asm-ia64/termios.h b/arch/ia64/include/asm/termios.h
index 689d218c0c2..689d218c0c2 100644
--- a/include/asm-ia64/termios.h
+++ b/arch/ia64/include/asm/termios.h
diff --git a/include/asm-ia64/thread_info.h b/arch/ia64/include/asm/thread_info.h
index 7c60fcdd2ef..7c60fcdd2ef 100644
--- a/include/asm-ia64/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
diff --git a/include/asm-ia64/timex.h b/arch/ia64/include/asm/timex.h
index 05a6baf8a47..05a6baf8a47 100644
--- a/include/asm-ia64/timex.h
+++ b/arch/ia64/include/asm/timex.h
diff --git a/include/asm-ia64/tlb.h b/arch/ia64/include/asm/tlb.h
index 20d8a39680c..20d8a39680c 100644
--- a/include/asm-ia64/tlb.h
+++ b/arch/ia64/include/asm/tlb.h
diff --git a/include/asm-ia64/tlbflush.h b/arch/ia64/include/asm/tlbflush.h
index 3be25dfed16..3be25dfed16 100644
--- a/include/asm-ia64/tlbflush.h
+++ b/arch/ia64/include/asm/tlbflush.h
diff --git a/include/asm-ia64/topology.h b/arch/ia64/include/asm/topology.h
index 32863b3bb1d..35bcb641c9e 100644
--- a/include/asm-ia64/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -1,6 +1,4 @@
 /*
- * linux/include/asm-ia64/topology.h
- *
  * Copyright (C) 2002, Erich Focht, NEC
  *
  * All rights reserved.
diff --git a/include/asm-ia64/types.h b/arch/ia64/include/asm/types.h
index e36b3716e71..e36b3716e71 100644
--- a/include/asm-ia64/types.h
+++ b/arch/ia64/include/asm/types.h
diff --git a/include/asm-ia64/uaccess.h b/arch/ia64/include/asm/uaccess.h
index 449c8c0fa2b..449c8c0fa2b 100644
--- a/include/asm-ia64/uaccess.h
+++ b/arch/ia64/include/asm/uaccess.h
diff --git a/include/asm-ia64/ucontext.h b/arch/ia64/include/asm/ucontext.h
index bf573dc8ca6..bf573dc8ca6 100644
--- a/include/asm-ia64/ucontext.h
+++ b/arch/ia64/include/asm/ucontext.h
diff --git a/include/asm-ia64/unaligned.h b/arch/ia64/include/asm/unaligned.h
index 7bddc7f5858..7bddc7f5858 100644
--- a/include/asm-ia64/unaligned.h
+++ b/arch/ia64/include/asm/unaligned.h
diff --git a/include/asm-ia64/uncached.h b/arch/ia64/include/asm/uncached.h
index 13d7e65ca3c..13d7e65ca3c 100644
--- a/include/asm-ia64/uncached.h
+++ b/arch/ia64/include/asm/uncached.h
diff --git a/include/asm-ia64/unistd.h b/arch/ia64/include/asm/unistd.h
index d535833aab5..d535833aab5 100644
--- a/include/asm-ia64/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
diff --git a/include/asm-ia64/unwind.h b/arch/ia64/include/asm/unwind.h
index 1af3875f1a5..1af3875f1a5 100644
--- a/include/asm-ia64/unwind.h
+++ b/arch/ia64/include/asm/unwind.h
diff --git a/include/asm-ia64/user.h b/arch/ia64/include/asm/user.h
index 8b982111034..8b982111034 100644
--- a/include/asm-ia64/user.h
+++ b/arch/ia64/include/asm/user.h
diff --git a/include/asm-ia64/ustack.h b/arch/ia64/include/asm/ustack.h
index 504167c35b8..504167c35b8 100644
--- a/include/asm-ia64/ustack.h
+++ b/arch/ia64/include/asm/ustack.h
diff --git a/include/asm-ia64/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index f607018af4a..f607018af4a 100644
--- a/include/asm-ia64/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
diff --git a/include/asm-ia64/uv/uv_mmrs.h b/arch/ia64/include/asm/uv/uv_mmrs.h
index c149ef08543..c149ef08543 100644
--- a/include/asm-ia64/uv/uv_mmrs.h
+++ b/arch/ia64/include/asm/uv/uv_mmrs.h
diff --git a/include/asm-ia64/vga.h b/arch/ia64/include/asm/vga.h
index 02184ecd820..02184ecd820 100644
--- a/include/asm-ia64/vga.h
+++ b/arch/ia64/include/asm/vga.h
diff --git a/include/asm-ia64/xor.h b/arch/ia64/include/asm/xor.h
index 41fb8744d17..a349e23dea1 100644
--- a/include/asm-ia64/xor.h
+++ b/arch/ia64/include/asm/xor.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-ia64/xor.h
- *
  * Optimized RAID-5 checksumming functions for IA-64.
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/ia64/kernel/.gitignore b/arch/ia64/kernel/.gitignore
index 98307759a3b..21cb0da5ded 100644
--- a/arch/ia64/kernel/.gitignore
+++ b/arch/ia64/kernel/.gitignore
@@ -1 +1,2 @@
 gate.lds
+vmlinux.lds
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index c64a55af9b9..94c44b1ccfd 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -10,11 +10,11 @@
 #include <linux/pid.h>
 #include <linux/clocksource.h>
 #include <linux/kbuild.h>
-#include <asm-ia64/processor.h>
-#include <asm-ia64/ptrace.h>
-#include <asm-ia64/siginfo.h>
-#include <asm-ia64/sigcontext.h>
-#include <asm-ia64/mca.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/siginfo.h>
+#include <asm/sigcontext.h>
+#include <asm/mca.h>
 
 #include "../kernel/sigframe.h"
 #include "../kernel/fsyscall_gtod_data.h"
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index db540e58c78..8bdea8eb62e 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -359,7 +359,31 @@ start_ap:
 	mov ar.rsc=0		// place RSE in enforced lazy mode
 	;;
 	loadrs			// clear the dirty partition
-	mov IA64_KR(PER_CPU_DATA)=r0	// clear physical per-CPU base
+	movl r19=__phys_per_cpu_start
+	mov r18=PERCPU_PAGE_SIZE
+	;;
+#ifndef CONFIG_SMP
+	add r19=r19,r18
+	;;
+#else
+(isAP)	br.few 2f
+	mov r20=r19
+	sub r19=r19,r18
+	;;
+	shr.u r18=r18,3
+1:
+	ld8 r21=[r20],8;;
+	st8[r19]=r21,8
+	adds r18=-1,r18;;
+	cmp4.lt p7,p6=0,r18
+(p7)	br.cond.dptk.few 1b
+2:
+#endif
+	tpa r19=r19
+	;;
+	.pred.rel.mutex isBP,isAP
+(isBP)	mov IA64_KR(PER_CPU_DATA)=r19	// per-CPU base for cpu0
+(isAP)	mov IA64_KR(PER_CPU_DATA)=r0	// clear physical per-CPU base
 	;;
 	mov ar.bspstore=r2	// establish the new RSE stack
 	;;
@@ -1123,7 +1147,7 @@ SET_REG(b5);
 	 *   p15    - used to track flag status.
 	 *
 	 * If you patch this code to use more registers, do not forget to update
-	 * the clobber lists for spin_lock() in include/asm-ia64/spinlock.h.
+	 * the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h.
 	 */
 
 #if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 3bc2fa64f87..5c4674ae8ae 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -69,7 +69,7 @@
  *     systems, we use one-to-one mapping between IA-64 vector and IRQ.  A
  *     platform can implement platform_irq_to_vector(irq) and
  *     platform_local_vector_to_irq(vector) APIs to differentiate the mapping.
- *     Please see also include/asm-ia64/hw_irq.h for those APIs.
+ *     Please see also arch/ia64/include/asm/hw_irq.h for those APIs.
  *
  * To sum up, there are three levels of mappings involved:
  *
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index c39627df3cd..416a952b19b 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -1243,11 +1243,11 @@ ENTRY(speculation_vector)
 
 	add r17=r17,r18			// now add the offset
 	;;
-	MOV_FROM_IIP(r17)
+	MOV_TO_IIP(r17, r19)
 	dep r16=0,r16,41,2		// clear EI
 	;;
 
-	MOV_FROM_IPSR(p0, r16)
+	MOV_TO_IPSR(p0, r16, r19)
 	;;
 
 	RFI
diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S
index 621630256c4..f69389c7be1 100644
--- a/arch/ia64/kernel/jprobes.S
+++ b/arch/ia64/kernel/jprobes.S
@@ -45,7 +45,7 @@
  * to the correct location.
  */
 #include <asm/asmmacro.h>
-#include <asm-ia64/break.h>
+#include <asm/break.h>
 
 	/*
 	 * void jprobe_break(void)
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index 29aad349e0c..aaa7d901521 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -135,15 +135,6 @@ static const char *reloc_name[256] = {
 
 #undef N
 
-struct got_entry {
-	uint64_t val;
-};
-
-struct fdesc {
-	uint64_t ip;
-	uint64_t gp;
-};
-
 /* Opaque struct for insns, to protect against derefs. */
 struct insn;
 
diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c
index 1ae049181e8..8273afc32db 100644
--- a/arch/ia64/kernel/nr-irqs.c
+++ b/arch/ia64/kernel/nr-irqs.c
@@ -9,7 +9,7 @@
 
 #include <linux/kbuild.h>
 #include <linux/threads.h>
-#include <asm-ia64/native/irq.h>
+#include <asm/native/irq.h>
 
 void foo(void)
 {
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index e5c2de9b29a..c27d5b2c182 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -314,7 +314,7 @@ static inline void __init setup_crashkernel(unsigned long total, int *n)
  *
  * Setup the reserved memory areas set aside for the boot parameters,
  * initrd, etc.  There are currently %IA64_MAX_RSVD_REGIONS defined,
- * see include/asm-ia64/meminit.h if you need to define more.
+ * see arch/ia64/include/asm/meminit.h if you need to define more.
  */
 void __init
 reserve_memory (void)
@@ -927,17 +927,19 @@ cpu_init (void)
 	if (smp_processor_id() == 0) {
 		cpu_set(0, per_cpu(cpu_sibling_map, 0));
 		cpu_set(0, cpu_core_map[0]);
+	} else {
+		/*
+		 * Set ar.k3 so that assembly code in MCA handler can compute
+		 * physical addresses of per cpu variables with a simple:
+		 *   phys = ar.k3 + &per_cpu_var
+		 * and the alt-dtlb-miss handler can set per-cpu mapping into
+		 * the TLB when needed. head.S already did this for cpu0.
+		 */
+		ia64_set_kr(IA64_KR_PER_CPU_DATA,
+			    ia64_tpa(cpu_data) - (long) __per_cpu_start);
 	}
 #endif
 
-	/*
-	 * We set ar.k3 so that assembly code in MCA handler can compute
-	 * physical addresses of per cpu variables with a simple:
-	 *   phys = ar.k3 + &per_cpu_var
-	 */
-	ia64_set_kr(IA64_KR_PER_CPU_DATA,
-		    ia64_tpa(cpu_data) - (long) __per_cpu_start);
-
 	get_max_cacheline_size();
 
 	/*
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 3676468612b..da8f020d82c 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -58,7 +58,7 @@ static struct local_tlb_flush_counts {
 	unsigned int count;
 } __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS];
 
-static DEFINE_PER_CPU(unsigned int, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
+static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
 
 #define IPI_CALL_FUNC		0
 #define IPI_CPU_STOP		1
@@ -254,7 +254,7 @@ smp_local_flush_tlb(void)
 void
 smp_flush_tlb_cpumask(cpumask_t xcpumask)
 {
-	unsigned int *counts = __ia64_per_cpu_var(shadow_flush_counts);
+	unsigned short *counts = __ia64_per_cpu_var(shadow_flush_counts);
 	cpumask_t cpumask = xcpumask;
 	int mycpu, cpu, flush_mycpu = 0;
 
@@ -262,7 +262,7 @@ smp_flush_tlb_cpumask(cpumask_t xcpumask)
 	mycpu = smp_processor_id();
 
 	for_each_cpu_mask(cpu, cpumask)
-		counts[cpu] = local_tlb_flush_counts[cpu].count;
+		counts[cpu] = local_tlb_flush_counts[cpu].count & 0xffff;
 
 	mb();
 	for_each_cpu_mask(cpu, cpumask) {
@@ -276,7 +276,7 @@ smp_flush_tlb_cpumask(cpumask_t xcpumask)
 		smp_local_flush_tlb();
 
 	for_each_cpu_mask(cpu, cpumask)
-		while(counts[cpu] == local_tlb_flush_counts[cpu].count)
+		while(counts[cpu] == (local_tlb_flush_counts[cpu].count & 0xffff))
 			udelay(FLUSH_DELAY);
 
 	preempt_enable();
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 03f1a9908af..d8f05e504fb 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -138,6 +138,7 @@ cpumask_t cpu_possible_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_possible_map);
 
 cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_core_map);
 DEFINE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
 
@@ -467,7 +468,9 @@ start_secondary (void *unused)
 {
 	/* Early console may use I/O ports */
 	ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
+#ifndef CONFIG_PRINTK_TIME
 	Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
+#endif
 	efi_map_pal_code();
 	cpu_init();
 	preempt_disable();
@@ -738,16 +741,14 @@ int __cpu_disable(void)
 			return -EBUSY;
 	}
 
-	cpu_clear(cpu, cpu_online_map);
-
 	if (migrate_platform_irqs(cpu)) {
 		cpu_set(cpu, cpu_online_map);
 		return (-EBUSY);
 	}
 
 	remove_siblinginfo(cpu);
-	cpu_clear(cpu, cpu_online_map);
 	fixup_irqs();
+	cpu_clear(cpu, cpu_online_map);
 	local_flush_tlb_all();
 	cpu_clear(cpu, cpu_callin_map);
 	return 0;
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 5a77206c249..de71da811cd 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -215,6 +215,9 @@ SECTIONS
   /* Per-cpu data: */
   percpu : { } :percpu
   . = ALIGN(PERCPU_PAGE_SIZE);
+#ifdef	CONFIG_SMP
+  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
+#endif
   __phys_per_cpu_start = .;
   .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
 	{
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 7a37d06376b..cd0d1a7284b 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -38,6 +38,7 @@
 #include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/tlb.h>
+#include <asm/elf.h>
 
 #include "misc.h"
 #include "vti.h"
@@ -61,12 +62,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
-
-struct fdesc{
-    unsigned long ip;
-    unsigned long gp;
-};
-
 static void kvm_flush_icache(unsigned long start, unsigned long len)
 {
 	int l;
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 798bf9835a5..e566ff43884 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -163,8 +163,14 @@ per_cpu_init (void)
 	 * get_zeroed_page().
 	 */
 	if (first_time) {
+		void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+
 		first_time=0;
-		for (cpu = 0; cpu < NR_CPUS; cpu++) {
+
+		__per_cpu_offset[0] = (char *) cpu0_data - __per_cpu_start;
+		per_cpu(local_per_cpu_offset, 0) = __per_cpu_offset[0];
+
+		for (cpu = 1; cpu < NR_CPUS; cpu++) {
 			memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
 			__per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start;
 			cpu_data += PERCPU_PAGE_SIZE;
@@ -177,7 +183,7 @@ per_cpu_init (void)
 static inline void
 alloc_per_cpu_data(void)
 {
-	cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
+	cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS-1,
 				   PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
 }
 #else
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index d83125e1ed2..78026aabaa7 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -143,7 +143,11 @@ static void *per_cpu_node_setup(void *cpu_data, int node)
 	int cpu;
 
 	for_each_possible_early_cpu(cpu) {
-		if (node == node_cpuid[cpu].nid) {
+		if (cpu == 0) {
+			void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+			__per_cpu_offset[cpu] = (char*)cpu0_data -
+				__per_cpu_start;
+		} else if (node == node_cpuid[cpu].nid) {
 			memcpy(__va(cpu_data), __phys_per_cpu_start,
 			       __per_cpu_end - __per_cpu_start);
 			__per_cpu_offset[cpu] = (char*)__va(cpu_data) -
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index c45fc7f5a97..b0f615759e9 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/log2.h>
@@ -21,7 +22,8 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT;
+unsigned int hpage_shift = HPAGE_SHIFT_DEFAULT;
+EXPORT_SYMBOL(hpage_shift);
 
 pte_t *
 huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 77b15f80f10..7545037a862 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -324,7 +324,6 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
 struct pci_bus * __devinit
 pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 {
-	struct pci_root_info info;
 	struct pci_controller *controller;
 	unsigned int windows = 0;
 	struct pci_bus *pbus;
@@ -346,22 +345,24 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window,
 			&windows);
 	if (windows) {
+		struct pci_root_info info;
+
 		controller->window =
 			kmalloc_node(sizeof(*controller->window) * windows,
 				     GFP_KERNEL, controller->node);
 		if (!controller->window)
 			goto out2;
-	}
 
-	name = kmalloc(16, GFP_KERNEL);
-	if (!name)
-		goto out3;
+		name = kmalloc(16, GFP_KERNEL);
+		if (!name)
+			goto out3;
 
-	sprintf(name, "PCI Bus %04x:%02x", domain, bus);
-	info.controller = controller;
-	info.name = name;
-	acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
-			&info);
+		sprintf(name, "PCI Bus %04x:%02x", domain, bus);
+		info.controller = controller;
+		info.name = name;
+		acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+			add_window, &info);
+	}
 	/*
 	 * See arch/x86/pci/acpi.c.
 	 * The desired pci bus might already be scanned in a quirk. We
diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c
index ab7e2fd4079..c77ebdf9811 100644
--- a/arch/ia64/sn/kernel/iomv.c
+++ b/arch/ia64/sn/kernel/iomv.c
@@ -63,7 +63,7 @@ EXPORT_SYMBOL(sn_io_addr);
 /**
  * __sn_mmiowb - I/O space memory barrier
  *
- * See include/asm-ia64/io.h and Documentation/DocBook/deviceiobook.tmpl
+ * See arch/ia64/include/asm/io.h and Documentation/DocBook/deviceiobook.tmpl
  * for details.
  *
  * On SN2, we wait for the PIO_WRITE_STATUS SHub register to clear.
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 529462c0157..79165122501 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -420,8 +420,10 @@ tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size)
 		entry = find_next_zero_bit(map, mapsize, last_entry);
 	}
 
-	if (entry > mapsize)
+	if (entry > mapsize) {
+		kfree(ca_dmamap);
 		goto map_return;
+	}
 
 	for (i = 0; i < entries; i++)
 		set_bit(entry + i, map);
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 8a2a53b3361..bb959fbab2d 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -580,13 +580,15 @@ int atari_keyb_init(void)
 	do {
 		/* reset IKBD ACIA */
 		acia.key_ctrl = ACIA_RESET |
-				(atari_switches & ATARI_SWITCH_IKBD) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_IKBD) ?
+				 ACIA_RHTID : 0);
 		(void)acia.key_ctrl;
 		(void)acia.key_data;
 
 		/* reset MIDI ACIA */
 		acia.mid_ctrl = ACIA_RESET |
-				(atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_MIDI) ?
+				 ACIA_RHTID : 0);
 		(void)acia.mid_ctrl;
 		(void)acia.mid_data;
 
@@ -599,7 +601,8 @@ int atari_keyb_init(void)
 				 ACIA_RHTID : ACIA_RLTID);
 
 		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S |
-				(atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_MIDI) ?
+				 ACIA_RHTID : 0);
 
 	/* make sure the interrupt line is up */
 	} while ((mfp.par_dt_reg & 0x10) == 0);
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 8e2a0f5faf5..8bd61a640fc 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:00 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -166,10 +172,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -183,6 +185,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -460,6 +466,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -470,6 +477,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -489,8 +497,6 @@ CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -556,6 +562,7 @@ CONFIG_A2091_SCSI=y
 CONFIG_GVP11_SCSI=y
 CONFIG_SCSI_A4000T=y
 CONFIG_SCSI_ZORRO7XX=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -564,7 +571,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -573,13 +580,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -722,6 +725,7 @@ CONFIG_INPUT_M68K_BEEP=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -757,6 +761,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -768,8 +773,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -844,10 +851,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
 CONFIG_DMASOUND=m
@@ -861,6 +864,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -899,6 +903,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -958,6 +963,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -980,7 +986,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -989,7 +994,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -1054,6 +1058,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1113,6 +1119,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1154,6 +1164,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index e2d511e2a1d..c41b854c028 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:01 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -161,10 +167,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -178,6 +180,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -411,6 +414,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -430,7 +434,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -499,6 +506,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -532,7 +536,6 @@ CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
-CONFIG_APOLLO_ELPLUS=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -627,6 +630,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -657,6 +661,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -668,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -738,10 +745,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -753,6 +756,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -789,6 +793,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -848,6 +853,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -860,18 +866,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -880,7 +885,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -944,6 +948,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1003,6 +1009,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1044,6 +1054,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 6e20d656ada..654c5acb9e8 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:02 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -179,6 +181,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -409,6 +412,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -428,7 +432,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -452,6 +458,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -462,6 +469,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -479,8 +487,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_FALCON_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -530,6 +536,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ATARI_SCSI=y
 # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
 # CONFIG_ATARI_SCSI_RESET_BOOT is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -538,7 +545,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -547,13 +554,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -666,6 +669,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -782,10 +789,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND=m
@@ -799,6 +802,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -806,11 +810,8 @@ CONFIG_HIDRAW=y
 # Character devices
 #
 CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
 CONFIG_ATARI_MIDI=m
 CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set
 
 #
 # File systems
@@ -820,8 +821,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
 CONFIG_JBD=y
+CONFIG_JBD2=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -840,6 +843,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -899,6 +903,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -920,7 +925,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -929,7 +933,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -994,6 +997,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1053,6 +1058,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1094,6 +1103,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index a0a9b30bb50..2e44af0fe54 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:03 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -723,6 +727,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -759,6 +764,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -818,6 +824,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -830,18 +837,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -850,7 +856,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -915,6 +920,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -974,6 +981,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1015,6 +1026,7 @@ CONFIG_BITREVERSE=m
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=m
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 6778041de26..3570fc89b08 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:04 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -179,6 +181,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -412,6 +415,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -431,7 +435,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -449,6 +455,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -500,6 +507,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -508,7 +516,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -517,13 +525,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -636,6 +640,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -666,6 +671,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -677,8 +683,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -747,10 +755,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -762,6 +766,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -796,6 +801,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -855,6 +861,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -867,18 +874,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -887,7 +893,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -951,6 +956,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1010,6 +1017,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1051,6 +1062,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 7cd37574034..db6e8822594 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:06 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -460,6 +467,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,8 +485,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_MAC_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -527,6 +533,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MAC_SCSI=y
 CONFIG_SCSI_MAC_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -535,7 +542,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -544,9 +551,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_MACINTOSH_DRIVERS=y
@@ -559,7 +563,6 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -670,6 +673,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -784,10 +791,6 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -799,6 +802,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -836,6 +840,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -895,6 +900,7 @@ CONFIG_HFSPLUS_FS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -917,7 +923,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -926,7 +931,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -991,6 +995,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1050,6 +1056,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1091,6 +1101,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 0747fa3984d..1a806102b99 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:07 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -173,10 +179,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -190,6 +192,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -427,6 +430,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -446,7 +450,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -476,6 +482,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -486,6 +493,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -508,8 +516,6 @@ CONFIG_BLK_DEV_FALCON_IDE=y
 CONFIG_BLK_DEV_MAC_IDE=y
 CONFIG_BLK_DEV_Q40IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -584,6 +590,7 @@ CONFIG_MVME147_SCSI=y
 CONFIG_MVME16x_SCSI=y
 CONFIG_BVME6000_SCSI=y
 CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -592,7 +599,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -601,9 +608,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_MACINTOSH_DRIVERS=y
@@ -616,7 +620,6 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -632,7 +635,6 @@ CONFIG_A2065=m
 CONFIG_HYDRA=m
 CONFIG_ZORRO8390=m
 CONFIG_APNE=m
-CONFIG_APOLLO_ELPLUS=y
 CONFIG_MAC8390=y
 CONFIG_MAC89x0=m
 CONFIG_MACSONIC=m
@@ -791,6 +793,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -827,6 +830,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -838,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -923,10 +929,6 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND_PAULA=m
@@ -942,6 +944,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -949,8 +952,6 @@ CONFIG_HIDRAW=y
 # Character devices
 #
 CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
 CONFIG_ATARI_MIDI=m
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
@@ -972,8 +973,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
 CONFIG_JBD=y
+CONFIG_JBD2=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -992,6 +995,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1051,6 +1055,7 @@ CONFIG_HFSPLUS_FS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1063,18 +1068,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1083,7 +1087,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -1152,6 +1155,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1211,6 +1216,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1252,6 +1261,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index e7a8246840b..cacb5aef6a3 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:08 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -502,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME147_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -510,7 +518,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -519,13 +527,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -630,6 +634,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -660,6 +665,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -671,8 +677,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -707,10 +715,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -722,6 +726,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -758,6 +763,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -817,6 +823,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -829,18 +836,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -849,7 +855,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -914,6 +919,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -973,6 +980,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1014,6 +1025,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index ab536eb172b..a183e25e348 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:09 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -723,6 +727,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -760,6 +765,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -819,6 +825,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -831,18 +838,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -851,7 +857,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -916,6 +921,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -975,6 +982,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1016,6 +1027,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index e05be687b50..72eaff0776b 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:10 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -458,6 +465,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -475,8 +483,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_Q40IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -536,6 +542,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -544,7 +551,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -553,13 +560,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -680,6 +683,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -711,6 +715,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -722,8 +727,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -792,10 +799,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_Q40=m
 CONFIG_DMASOUND=m
@@ -809,6 +812,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -843,6 +847,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -902,6 +907,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -924,7 +930,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -933,7 +938,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -997,6 +1001,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1056,6 +1062,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1097,6 +1107,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 296340d2b31..cb62b96d766 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:11 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,10 +155,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -166,6 +168,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -399,6 +402,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -418,7 +422,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -436,6 +442,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -488,6 +495,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -496,7 +504,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -505,13 +513,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -527,7 +531,6 @@ CONFIG_SUN3_82586=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -617,6 +620,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -647,19 +651,20 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -727,10 +732,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -776,6 +777,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -835,6 +837,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -847,18 +850,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -867,7 +869,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -932,6 +933,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -991,6 +994,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1032,6 +1039,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 8d3a416c92b..04b4363a705 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:12 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -160,10 +166,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -177,6 +179,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -447,6 +453,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -499,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -627,6 +631,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -657,6 +662,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -668,8 +674,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -737,10 +745,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -752,6 +756,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -786,6 +791,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -845,6 +851,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -857,18 +864,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -877,7 +883,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -942,6 +947,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1001,6 +1008,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1042,6 +1053,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 18a9c5f4b00..f28404d9a2b 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -747,4 +747,10 @@ sys_call_table:
 	.long sys_fallocate		/* 320 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 325 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index dae9c982aa8..c7b25b0aacf 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -11,7 +11,6 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 
 #include <asm/traps.h>
 #include <asm/bootinfo.h>
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index f3b27d04a31..1bdb03c73c0 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -27,7 +27,6 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 #include <linux/module.h>
 
 #include <asm/bootinfo.h>
diff --git a/include/asm-m68knommu/Kbuild b/arch/m68knommu/include/asm/Kbuild
index c68e1680da0..c68e1680da0 100644
--- a/include/asm-m68knommu/Kbuild
+++ b/arch/m68knommu/include/asm/Kbuild
diff --git a/include/asm-m68knommu/MC68328.h b/arch/m68knommu/include/asm/MC68328.h
index a337e56d09b..a337e56d09b 100644
--- a/include/asm-m68knommu/MC68328.h
+++ b/arch/m68knommu/include/asm/MC68328.h
diff --git a/include/asm-m68knommu/MC68332.h b/arch/m68knommu/include/asm/MC68332.h
index 6bb8f02685a..6bb8f02685a 100644
--- a/include/asm-m68knommu/MC68332.h
+++ b/arch/m68knommu/include/asm/MC68332.h
diff --git a/include/asm-m68knommu/MC68EZ328.h b/arch/m68knommu/include/asm/MC68EZ328.h
index 69b7f9139e5..69b7f9139e5 100644
--- a/include/asm-m68knommu/MC68EZ328.h
+++ b/arch/m68knommu/include/asm/MC68EZ328.h
diff --git a/include/asm-m68knommu/MC68VZ328.h b/arch/m68knommu/include/asm/MC68VZ328.h
index 2b9bf626a0a..2b9bf626a0a 100644
--- a/include/asm-m68knommu/MC68VZ328.h
+++ b/arch/m68knommu/include/asm/MC68VZ328.h
diff --git a/include/asm-m68knommu/a.out.h b/arch/m68knommu/include/asm/a.out.h
index ce18ef99de0..ce18ef99de0 100644
--- a/include/asm-m68knommu/a.out.h
+++ b/arch/m68knommu/include/asm/a.out.h
diff --git a/include/asm-m68knommu/anchor.h b/arch/m68knommu/include/asm/anchor.h
index 871c0d5cfc3..871c0d5cfc3 100644
--- a/include/asm-m68knommu/anchor.h
+++ b/arch/m68knommu/include/asm/anchor.h
diff --git a/include/asm-m68knommu/atomic.h b/arch/m68knommu/include/asm/atomic.h
index d5632a305da..d5632a305da 100644
--- a/include/asm-m68knommu/atomic.h
+++ b/arch/m68knommu/include/asm/atomic.h
diff --git a/include/asm-m68knommu/auxvec.h b/arch/m68knommu/include/asm/auxvec.h
index 844d6d52204..844d6d52204 100644
--- a/include/asm-m68knommu/auxvec.h
+++ b/arch/m68knommu/include/asm/auxvec.h
diff --git a/include/asm-m68knommu/bitops.h b/arch/m68knommu/include/asm/bitops.h
index 6f3685eab44..6f3685eab44 100644
--- a/include/asm-m68knommu/bitops.h
+++ b/arch/m68knommu/include/asm/bitops.h
diff --git a/include/asm-m68knommu/bootinfo.h b/arch/m68knommu/include/asm/bootinfo.h
index c12e526f518..c12e526f518 100644
--- a/include/asm-m68knommu/bootinfo.h
+++ b/arch/m68knommu/include/asm/bootinfo.h
diff --git a/include/asm-m68knommu/bootstd.h b/arch/m68knommu/include/asm/bootstd.h
index bdc1a4ac4fe..bdc1a4ac4fe 100644
--- a/include/asm-m68knommu/bootstd.h
+++ b/arch/m68knommu/include/asm/bootstd.h
diff --git a/include/asm-m68knommu/bug.h b/arch/m68knommu/include/asm/bug.h
index 70e7dc0af21..70e7dc0af21 100644
--- a/include/asm-m68knommu/bug.h
+++ b/arch/m68knommu/include/asm/bug.h
diff --git a/include/asm-m68knommu/bugs.h b/arch/m68knommu/include/asm/bugs.h
index 5f382dac3a6..5f382dac3a6 100644
--- a/include/asm-m68knommu/bugs.h
+++ b/arch/m68knommu/include/asm/bugs.h
diff --git a/include/asm-m68knommu/byteorder.h b/arch/m68knommu/include/asm/byteorder.h
index 20bb4426b61..20bb4426b61 100644
--- a/include/asm-m68knommu/byteorder.h
+++ b/arch/m68knommu/include/asm/byteorder.h
diff --git a/include/asm-m68knommu/cache.h b/arch/m68knommu/include/asm/cache.h
index 24e9eace5f8..24e9eace5f8 100644
--- a/include/asm-m68knommu/cache.h
+++ b/arch/m68knommu/include/asm/cache.h
diff --git a/include/asm-m68knommu/cachectl.h b/arch/m68knommu/include/asm/cachectl.h
index bcf5a6a9dd5..bcf5a6a9dd5 100644
--- a/include/asm-m68knommu/cachectl.h
+++ b/arch/m68knommu/include/asm/cachectl.h
diff --git a/include/asm-m68knommu/cacheflush.h b/arch/m68knommu/include/asm/cacheflush.h
index 87e5dc0413b..87e5dc0413b 100644
--- a/include/asm-m68knommu/cacheflush.h
+++ b/arch/m68knommu/include/asm/cacheflush.h
diff --git a/include/asm-m68knommu/checksum.h b/arch/m68knommu/include/asm/checksum.h
index 81883482ffb..81883482ffb 100644
--- a/include/asm-m68knommu/checksum.h
+++ b/arch/m68knommu/include/asm/checksum.h
diff --git a/include/asm-m68knommu/coldfire.h b/arch/m68knommu/include/asm/coldfire.h
index 83a9fa4e618..83a9fa4e618 100644
--- a/include/asm-m68knommu/coldfire.h
+++ b/arch/m68knommu/include/asm/coldfire.h
diff --git a/include/asm-m68knommu/commproc.h b/arch/m68knommu/include/asm/commproc.h
index edf5eb6c08d..edf5eb6c08d 100644
--- a/include/asm-m68knommu/commproc.h
+++ b/arch/m68knommu/include/asm/commproc.h
diff --git a/include/asm-m68knommu/cputime.h b/arch/m68knommu/include/asm/cputime.h
index a0c4a660878..a0c4a660878 100644
--- a/include/asm-m68knommu/cputime.h
+++ b/arch/m68knommu/include/asm/cputime.h
diff --git a/include/asm-m68knommu/current.h b/arch/m68knommu/include/asm/current.h
index 53ee0f9f7ce..53ee0f9f7ce 100644
--- a/include/asm-m68knommu/current.h
+++ b/arch/m68knommu/include/asm/current.h
diff --git a/include/asm-m68knommu/dbg.h b/arch/m68knommu/include/asm/dbg.h
index 27af3270f67..27af3270f67 100644
--- a/include/asm-m68knommu/dbg.h
+++ b/arch/m68knommu/include/asm/dbg.h
diff --git a/include/asm-m68knommu/delay.h b/arch/m68knommu/include/asm/delay.h
index 55cbd6294ab..55cbd6294ab 100644
--- a/include/asm-m68knommu/delay.h
+++ b/arch/m68knommu/include/asm/delay.h
diff --git a/include/asm-m68knommu/device.h b/arch/m68knommu/include/asm/device.h
index d8f9872b0e2..d8f9872b0e2 100644
--- a/include/asm-m68knommu/device.h
+++ b/arch/m68knommu/include/asm/device.h
diff --git a/include/asm-m68knommu/div64.h b/arch/m68knommu/include/asm/div64.h
index 6cd978cefb2..6cd978cefb2 100644
--- a/include/asm-m68knommu/div64.h
+++ b/arch/m68knommu/include/asm/div64.h
diff --git a/include/asm-m68knommu/dma-mapping.h b/arch/m68knommu/include/asm/dma-mapping.h
index 6aeab18e58b..6aeab18e58b 100644
--- a/include/asm-m68knommu/dma-mapping.h
+++ b/arch/m68knommu/include/asm/dma-mapping.h
diff --git a/include/asm-m68knommu/dma.h b/arch/m68knommu/include/asm/dma.h
index 939a0205621..939a0205621 100644
--- a/include/asm-m68knommu/dma.h
+++ b/arch/m68knommu/include/asm/dma.h
diff --git a/include/asm-m68knommu/elf.h b/arch/m68knommu/include/asm/elf.h
index 27f0ec70fba..27f0ec70fba 100644
--- a/include/asm-m68knommu/elf.h
+++ b/arch/m68knommu/include/asm/elf.h
diff --git a/include/asm-m68knommu/elia.h b/arch/m68knommu/include/asm/elia.h
index e037d4e2de3..e037d4e2de3 100644
--- a/include/asm-m68knommu/elia.h
+++ b/arch/m68knommu/include/asm/elia.h
diff --git a/include/asm-m68knommu/emergency-restart.h b/arch/m68knommu/include/asm/emergency-restart.h
index 108d8c48e42..108d8c48e42 100644
--- a/include/asm-m68knommu/emergency-restart.h
+++ b/arch/m68knommu/include/asm/emergency-restart.h
diff --git a/include/asm-m68knommu/entry.h b/arch/m68knommu/include/asm/entry.h
index c2553d26273..c2553d26273 100644
--- a/include/asm-m68knommu/entry.h
+++ b/arch/m68knommu/include/asm/entry.h
diff --git a/include/asm-m68knommu/errno.h b/arch/m68knommu/include/asm/errno.h
index 7e8c22b9a5e..7e8c22b9a5e 100644
--- a/include/asm-m68knommu/errno.h
+++ b/arch/m68knommu/include/asm/errno.h
diff --git a/include/asm-m68knommu/fb.h b/arch/m68knommu/include/asm/fb.h
index c7df3803099..c7df3803099 100644
--- a/include/asm-m68knommu/fb.h
+++ b/arch/m68knommu/include/asm/fb.h
diff --git a/include/asm-m68knommu/fcntl.h b/arch/m68knommu/include/asm/fcntl.h
index f6a552cda4c..f6a552cda4c 100644
--- a/include/asm-m68knommu/fcntl.h
+++ b/arch/m68knommu/include/asm/fcntl.h
diff --git a/include/asm-m68knommu/flat.h b/arch/m68knommu/include/asm/flat.h
index 814b5174a8e..814b5174a8e 100644
--- a/include/asm-m68knommu/flat.h
+++ b/arch/m68knommu/include/asm/flat.h
diff --git a/include/asm-m68knommu/fpu.h b/arch/m68knommu/include/asm/fpu.h
index b16b2e4fca2..b16b2e4fca2 100644
--- a/include/asm-m68knommu/fpu.h
+++ b/arch/m68knommu/include/asm/fpu.h
diff --git a/include/asm-m68knommu/futex.h b/arch/m68knommu/include/asm/futex.h
index 6a332a9f099..6a332a9f099 100644
--- a/include/asm-m68knommu/futex.h
+++ b/arch/m68knommu/include/asm/futex.h
diff --git a/include/asm-m68knommu/hardirq.h b/arch/m68knommu/include/asm/hardirq.h
index bfad28149a4..bfad28149a4 100644
--- a/include/asm-m68knommu/hardirq.h
+++ b/arch/m68knommu/include/asm/hardirq.h
diff --git a/include/asm-m68knommu/hw_irq.h b/arch/m68knommu/include/asm/hw_irq.h
index f3ec9e5ae04..f3ec9e5ae04 100644
--- a/include/asm-m68knommu/hw_irq.h
+++ b/arch/m68knommu/include/asm/hw_irq.h
diff --git a/include/asm-m68knommu/hwtest.h b/arch/m68knommu/include/asm/hwtest.h
index 700626a1b1b..700626a1b1b 100644
--- a/include/asm-m68knommu/hwtest.h
+++ b/arch/m68knommu/include/asm/hwtest.h
diff --git a/include/asm-m68knommu/io.h b/arch/m68knommu/include/asm/io.h
index 6adef1ee208..6adef1ee208 100644
--- a/include/asm-m68knommu/io.h
+++ b/arch/m68knommu/include/asm/io.h
diff --git a/include/asm-m68knommu/ioctl.h b/arch/m68knommu/include/asm/ioctl.h
index b279fe06dfe..b279fe06dfe 100644
--- a/include/asm-m68knommu/ioctl.h
+++ b/arch/m68knommu/include/asm/ioctl.h
diff --git a/include/asm-m68knommu/ioctls.h b/arch/m68knommu/include/asm/ioctls.h
index 0b1eb4d8505..0b1eb4d8505 100644
--- a/include/asm-m68knommu/ioctls.h
+++ b/arch/m68knommu/include/asm/ioctls.h
diff --git a/include/asm-m68knommu/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h
index e4a7be6dd70..e4a7be6dd70 100644
--- a/include/asm-m68knommu/ipcbuf.h
+++ b/arch/m68knommu/include/asm/ipcbuf.h
diff --git a/include/asm-m68knommu/irq.h b/arch/m68knommu/include/asm/irq.h
index 9373c31ac87..9373c31ac87 100644
--- a/include/asm-m68knommu/irq.h
+++ b/arch/m68knommu/include/asm/irq.h
diff --git a/include/asm-m68knommu/irq_regs.h b/arch/m68knommu/include/asm/irq_regs.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-m68knommu/irq_regs.h
+++ b/arch/m68knommu/include/asm/irq_regs.h
diff --git a/include/asm-m68knommu/kdebug.h b/arch/m68knommu/include/asm/kdebug.h
index 6ece1b03766..6ece1b03766 100644
--- a/include/asm-m68knommu/kdebug.h
+++ b/arch/m68knommu/include/asm/kdebug.h
diff --git a/include/asm-m68knommu/kmap_types.h b/arch/m68knommu/include/asm/kmap_types.h
index bfb6707575d..bfb6707575d 100644
--- a/include/asm-m68knommu/kmap_types.h
+++ b/arch/m68knommu/include/asm/kmap_types.h
diff --git a/include/asm-m68knommu/linkage.h b/arch/m68knommu/include/asm/linkage.h
index c288a19ff48..c288a19ff48 100644
--- a/include/asm-m68knommu/linkage.h
+++ b/arch/m68knommu/include/asm/linkage.h
diff --git a/include/asm-m68knommu/local.h b/arch/m68knommu/include/asm/local.h
index 84a39c1b86f..84a39c1b86f 100644
--- a/include/asm-m68knommu/local.h
+++ b/arch/m68knommu/include/asm/local.h
diff --git a/include/asm-m68knommu/m5206sim.h b/arch/m68knommu/include/asm/m5206sim.h
index 7e3594dea88..7e3594dea88 100644
--- a/include/asm-m68knommu/m5206sim.h
+++ b/arch/m68knommu/include/asm/m5206sim.h
diff --git a/include/asm-m68knommu/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h
index 49d016e6391..49d016e6391 100644
--- a/include/asm-m68knommu/m520xsim.h
+++ b/arch/m68knommu/include/asm/m520xsim.h
diff --git a/include/asm-m68knommu/m523xsim.h b/arch/m68knommu/include/asm/m523xsim.h
index bf397313e93..bf397313e93 100644
--- a/include/asm-m68knommu/m523xsim.h
+++ b/arch/m68knommu/include/asm/m523xsim.h
diff --git a/include/asm-m68knommu/m5249sim.h b/arch/m68knommu/include/asm/m5249sim.h
index 366eb8602d2..366eb8602d2 100644
--- a/include/asm-m68knommu/m5249sim.h
+++ b/arch/m68knommu/include/asm/m5249sim.h
diff --git a/include/asm-m68knommu/m5272sim.h b/arch/m68knommu/include/asm/m5272sim.h
index 6217edc2113..6217edc2113 100644
--- a/include/asm-m68knommu/m5272sim.h
+++ b/arch/m68knommu/include/asm/m5272sim.h
diff --git a/include/asm-m68knommu/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h
index 1f63ab3fb3e..1f63ab3fb3e 100644
--- a/include/asm-m68knommu/m527xsim.h
+++ b/arch/m68knommu/include/asm/m527xsim.h
diff --git a/include/asm-m68knommu/m528xsim.h b/arch/m68knommu/include/asm/m528xsim.h
index 28bf783a5d6..28bf783a5d6 100644
--- a/include/asm-m68knommu/m528xsim.h
+++ b/arch/m68knommu/include/asm/m528xsim.h
diff --git a/include/asm-m68knommu/m5307sim.h b/arch/m68knommu/include/asm/m5307sim.h
index 5886728409c..5886728409c 100644
--- a/include/asm-m68knommu/m5307sim.h
+++ b/arch/m68knommu/include/asm/m5307sim.h
diff --git a/include/asm-m68knommu/m532xsim.h b/arch/m68knommu/include/asm/m532xsim.h
index 1835fd20a82..1835fd20a82 100644
--- a/include/asm-m68knommu/m532xsim.h
+++ b/arch/m68knommu/include/asm/m532xsim.h
diff --git a/include/asm-m68knommu/m5407sim.h b/arch/m68knommu/include/asm/m5407sim.h
index cc22c4a5300..cc22c4a5300 100644
--- a/include/asm-m68knommu/m5407sim.h
+++ b/arch/m68knommu/include/asm/m5407sim.h
diff --git a/include/asm-m68knommu/m68360.h b/arch/m68knommu/include/asm/m68360.h
index eb7d39ef285..eb7d39ef285 100644
--- a/include/asm-m68knommu/m68360.h
+++ b/arch/m68knommu/include/asm/m68360.h
diff --git a/include/asm-m68knommu/m68360_enet.h b/arch/m68knommu/include/asm/m68360_enet.h
index c36f4d05920..c36f4d05920 100644
--- a/include/asm-m68knommu/m68360_enet.h
+++ b/arch/m68knommu/include/asm/m68360_enet.h
diff --git a/include/asm-m68knommu/m68360_pram.h b/arch/m68knommu/include/asm/m68360_pram.h
index e6088bbce93..e6088bbce93 100644
--- a/include/asm-m68knommu/m68360_pram.h
+++ b/arch/m68knommu/include/asm/m68360_pram.h
diff --git a/include/asm-m68knommu/m68360_quicc.h b/arch/m68knommu/include/asm/m68360_quicc.h
index 6d40f4d18e1..6d40f4d18e1 100644
--- a/include/asm-m68knommu/m68360_quicc.h
+++ b/arch/m68knommu/include/asm/m68360_quicc.h
diff --git a/include/asm-m68knommu/m68360_regs.h b/arch/m68knommu/include/asm/m68360_regs.h
index d57217ca4f2..d57217ca4f2 100644
--- a/include/asm-m68knommu/m68360_regs.h
+++ b/arch/m68knommu/include/asm/m68360_regs.h
diff --git a/include/asm-m68knommu/machdep.h b/arch/m68knommu/include/asm/machdep.h
index de9f47a51cc..de9f47a51cc 100644
--- a/include/asm-m68knommu/machdep.h
+++ b/arch/m68knommu/include/asm/machdep.h
diff --git a/include/asm-m68knommu/math-emu.h b/arch/m68knommu/include/asm/math-emu.h
index 7e7090517b7..7e7090517b7 100644
--- a/include/asm-m68knommu/math-emu.h
+++ b/arch/m68knommu/include/asm/math-emu.h
diff --git a/include/asm-m68knommu/mc146818rtc.h b/arch/m68knommu/include/asm/mc146818rtc.h
index 907a0481a14..907a0481a14 100644
--- a/include/asm-m68knommu/mc146818rtc.h
+++ b/arch/m68knommu/include/asm/mc146818rtc.h
diff --git a/include/asm-m68knommu/mcfcache.h b/arch/m68knommu/include/asm/mcfcache.h
index c042634fada..c042634fada 100644
--- a/include/asm-m68knommu/mcfcache.h
+++ b/arch/m68knommu/include/asm/mcfcache.h
diff --git a/include/asm-m68knommu/mcfdma.h b/arch/m68knommu/include/asm/mcfdma.h
index 705c52c79cd..705c52c79cd 100644
--- a/include/asm-m68knommu/mcfdma.h
+++ b/arch/m68knommu/include/asm/mcfdma.h
diff --git a/include/asm-m68knommu/mcfmbus.h b/arch/m68knommu/include/asm/mcfmbus.h
index 319899c47a2..319899c47a2 100644
--- a/include/asm-m68knommu/mcfmbus.h
+++ b/arch/m68knommu/include/asm/mcfmbus.h
diff --git a/include/asm-m68knommu/mcfne.h b/arch/m68knommu/include/asm/mcfne.h
index 431f63aadd0..431f63aadd0 100644
--- a/include/asm-m68knommu/mcfne.h
+++ b/arch/m68knommu/include/asm/mcfne.h
diff --git a/include/asm-m68knommu/mcfpci.h b/arch/m68knommu/include/asm/mcfpci.h
index f1507dd06ec..f1507dd06ec 100644
--- a/include/asm-m68knommu/mcfpci.h
+++ b/arch/m68knommu/include/asm/mcfpci.h
diff --git a/include/asm-m68knommu/mcfpit.h b/arch/m68knommu/include/asm/mcfpit.h
index f570cf64fd2..f570cf64fd2 100644
--- a/include/asm-m68knommu/mcfpit.h
+++ b/arch/m68knommu/include/asm/mcfpit.h
diff --git a/include/asm-m68knommu/mcfsim.h b/arch/m68knommu/include/asm/mcfsim.h
index da3f2ceff3a..da3f2ceff3a 100644
--- a/include/asm-m68knommu/mcfsim.h
+++ b/arch/m68knommu/include/asm/mcfsim.h
diff --git a/include/asm-m68knommu/mcfsmc.h b/arch/m68knommu/include/asm/mcfsmc.h
index 2d7a4dbd968..2d7a4dbd968 100644
--- a/include/asm-m68knommu/mcfsmc.h
+++ b/arch/m68knommu/include/asm/mcfsmc.h
diff --git a/include/asm-m68knommu/mcftimer.h b/arch/m68knommu/include/asm/mcftimer.h
index 0f90f6d2227..0f90f6d2227 100644
--- a/include/asm-m68knommu/mcftimer.h
+++ b/arch/m68knommu/include/asm/mcftimer.h
diff --git a/include/asm-m68knommu/mcfuart.h b/arch/m68knommu/include/asm/mcfuart.h
index ef229387361..ef229387361 100644
--- a/include/asm-m68knommu/mcfuart.h
+++ b/arch/m68knommu/include/asm/mcfuart.h
diff --git a/include/asm-m68knommu/mcfwdebug.h b/arch/m68knommu/include/asm/mcfwdebug.h
index 27f70e45d70..27f70e45d70 100644
--- a/include/asm-m68knommu/mcfwdebug.h
+++ b/arch/m68knommu/include/asm/mcfwdebug.h
diff --git a/include/asm-m68knommu/md.h b/arch/m68knommu/include/asm/md.h
index d810c78de5f..d810c78de5f 100644
--- a/include/asm-m68knommu/md.h
+++ b/arch/m68knommu/include/asm/md.h
diff --git a/include/asm-m68knommu/mman.h b/arch/m68knommu/include/asm/mman.h
index 4846c682efe..4846c682efe 100644
--- a/include/asm-m68knommu/mman.h
+++ b/arch/m68knommu/include/asm/mman.h
diff --git a/include/asm-m68knommu/mmu.h b/arch/m68knommu/include/asm/mmu.h
index 5fa6b68353b..5fa6b68353b 100644
--- a/include/asm-m68knommu/mmu.h
+++ b/arch/m68knommu/include/asm/mmu.h
diff --git a/include/asm-m68knommu/mmu_context.h b/arch/m68knommu/include/asm/mmu_context.h
index 9ccee4278c9..9ccee4278c9 100644
--- a/include/asm-m68knommu/mmu_context.h
+++ b/arch/m68knommu/include/asm/mmu_context.h
diff --git a/include/asm-m68knommu/module.h b/arch/m68knommu/include/asm/module.h
index 2e45ab50b23..2e45ab50b23 100644
--- a/include/asm-m68knommu/module.h
+++ b/arch/m68knommu/include/asm/module.h
diff --git a/include/asm-m68knommu/movs.h b/arch/m68knommu/include/asm/movs.h
index 81a16779e83..81a16779e83 100644
--- a/include/asm-m68knommu/movs.h
+++ b/arch/m68knommu/include/asm/movs.h
diff --git a/include/asm-m68knommu/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h
index bdfadec4d52..bdfadec4d52 100644
--- a/include/asm-m68knommu/msgbuf.h
+++ b/arch/m68knommu/include/asm/msgbuf.h
diff --git a/include/asm-m68knommu/mutex.h b/arch/m68knommu/include/asm/mutex.h
index 458c1f7fbc1..458c1f7fbc1 100644
--- a/include/asm-m68knommu/mutex.h
+++ b/arch/m68knommu/include/asm/mutex.h
diff --git a/include/asm-m68knommu/nettel.h b/arch/m68knommu/include/asm/nettel.h
index 0299f6a2dee..0299f6a2dee 100644
--- a/include/asm-m68knommu/nettel.h
+++ b/arch/m68knommu/include/asm/nettel.h
diff --git a/include/asm-m68knommu/openprom.h b/arch/m68knommu/include/asm/openprom.h
index fdba7953ff9..fdba7953ff9 100644
--- a/include/asm-m68knommu/openprom.h
+++ b/arch/m68knommu/include/asm/openprom.h
diff --git a/include/asm-m68knommu/oplib.h b/arch/m68knommu/include/asm/oplib.h
index ce079dc332d..ce079dc332d 100644
--- a/include/asm-m68knommu/oplib.h
+++ b/arch/m68knommu/include/asm/oplib.h
diff --git a/include/asm-m68knommu/page.h b/arch/m68knommu/include/asm/page.h
index 3a1ede4544c..3a1ede4544c 100644
--- a/include/asm-m68knommu/page.h
+++ b/arch/m68knommu/include/asm/page.h
diff --git a/include/asm-m68knommu/page_offset.h b/arch/m68knommu/include/asm/page_offset.h
index d4e73e0ba64..d4e73e0ba64 100644
--- a/include/asm-m68knommu/page_offset.h
+++ b/arch/m68knommu/include/asm/page_offset.h
diff --git a/include/asm-m68knommu/param.h b/arch/m68knommu/include/asm/param.h
index 6044397adb6..6044397adb6 100644
--- a/include/asm-m68knommu/param.h
+++ b/arch/m68knommu/include/asm/param.h
diff --git a/include/asm-m68knommu/pci.h b/arch/m68knommu/include/asm/pci.h
index a13f3cc8745..a13f3cc8745 100644
--- a/include/asm-m68knommu/pci.h
+++ b/arch/m68knommu/include/asm/pci.h
diff --git a/include/asm-m68knommu/percpu.h b/arch/m68knommu/include/asm/percpu.h
index 5de72c327ef..5de72c327ef 100644
--- a/include/asm-m68knommu/percpu.h
+++ b/arch/m68knommu/include/asm/percpu.h
diff --git a/include/asm-m68knommu/pgalloc.h b/arch/m68knommu/include/asm/pgalloc.h
index d6352f671ec..d6352f671ec 100644
--- a/include/asm-m68knommu/pgalloc.h
+++ b/arch/m68knommu/include/asm/pgalloc.h
diff --git a/include/asm-m68knommu/pgtable.h b/arch/m68knommu/include/asm/pgtable.h
index 46251016e82..46251016e82 100644
--- a/include/asm-m68knommu/pgtable.h
+++ b/arch/m68knommu/include/asm/pgtable.h
diff --git a/include/asm-m68knommu/poll.h b/arch/m68knommu/include/asm/poll.h
index ee1b6cb549c..ee1b6cb549c 100644
--- a/include/asm-m68knommu/poll.h
+++ b/arch/m68knommu/include/asm/poll.h
diff --git a/include/asm-m68knommu/posix_types.h b/arch/m68knommu/include/asm/posix_types.h
index 6205fb9392a..6205fb9392a 100644
--- a/include/asm-m68knommu/posix_types.h
+++ b/arch/m68knommu/include/asm/posix_types.h
diff --git a/include/asm-m68knommu/processor.h b/arch/m68knommu/include/asm/processor.h
index 91cba18acdd..91cba18acdd 100644
--- a/include/asm-m68knommu/processor.h
+++ b/arch/m68knommu/include/asm/processor.h
diff --git a/include/asm-m68knommu/ptrace.h b/arch/m68knommu/include/asm/ptrace.h
index 8c9194b9854..8c9194b9854 100644
--- a/include/asm-m68knommu/ptrace.h
+++ b/arch/m68knommu/include/asm/ptrace.h
diff --git a/include/asm-m68knommu/quicc_simple.h b/arch/m68knommu/include/asm/quicc_simple.h
index c3636932d4b..c3636932d4b 100644
--- a/include/asm-m68knommu/quicc_simple.h
+++ b/arch/m68knommu/include/asm/quicc_simple.h
diff --git a/include/asm-m68knommu/resource.h b/arch/m68knommu/include/asm/resource.h
index 7fa63d5ea57..7fa63d5ea57 100644
--- a/include/asm-m68knommu/resource.h
+++ b/arch/m68knommu/include/asm/resource.h
diff --git a/include/asm-m68knommu/rtc.h b/arch/m68knommu/include/asm/rtc.h
index eaf18ec83c8..eaf18ec83c8 100644
--- a/include/asm-m68knommu/rtc.h
+++ b/arch/m68knommu/include/asm/rtc.h
diff --git a/include/asm-m68knommu/scatterlist.h b/arch/m68knommu/include/asm/scatterlist.h
index afc4788b0d2..afc4788b0d2 100644
--- a/include/asm-m68knommu/scatterlist.h
+++ b/arch/m68knommu/include/asm/scatterlist.h
diff --git a/include/asm-m68knommu/sections.h b/arch/m68knommu/include/asm/sections.h
index dd0ecb98ec0..dd0ecb98ec0 100644
--- a/include/asm-m68knommu/sections.h
+++ b/arch/m68knommu/include/asm/sections.h
diff --git a/include/asm-m68knommu/segment.h b/arch/m68knommu/include/asm/segment.h
index 42318ebec7e..42318ebec7e 100644
--- a/include/asm-m68knommu/segment.h
+++ b/arch/m68knommu/include/asm/segment.h
diff --git a/include/asm-m68knommu/sembuf.h b/arch/m68knommu/include/asm/sembuf.h
index 3a634f9ecf5..3a634f9ecf5 100644
--- a/include/asm-m68knommu/sembuf.h
+++ b/arch/m68knommu/include/asm/sembuf.h
diff --git a/include/asm-m68knommu/setup.h b/arch/m68knommu/include/asm/setup.h
index fb86bb2a607..fb86bb2a607 100644
--- a/include/asm-m68knommu/setup.h
+++ b/arch/m68knommu/include/asm/setup.h
diff --git a/include/asm-m68knommu/shm.h b/arch/m68knommu/include/asm/shm.h
index cc8e522d905..cc8e522d905 100644
--- a/include/asm-m68knommu/shm.h
+++ b/arch/m68knommu/include/asm/shm.h
diff --git a/include/asm-m68knommu/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h
index bc34cf8eefc..bc34cf8eefc 100644
--- a/include/asm-m68knommu/shmbuf.h
+++ b/arch/m68knommu/include/asm/shmbuf.h
diff --git a/include/asm-m68knommu/shmparam.h b/arch/m68knommu/include/asm/shmparam.h
index d7ee69648eb..d7ee69648eb 100644
--- a/include/asm-m68knommu/shmparam.h
+++ b/arch/m68knommu/include/asm/shmparam.h
diff --git a/include/asm-m68knommu/sigcontext.h b/arch/m68knommu/include/asm/sigcontext.h
index 36c293fc133..36c293fc133 100644
--- a/include/asm-m68knommu/sigcontext.h
+++ b/arch/m68knommu/include/asm/sigcontext.h
diff --git a/include/asm-m68knommu/siginfo.h b/arch/m68knommu/include/asm/siginfo.h
index b18e5f4064a..b18e5f4064a 100644
--- a/include/asm-m68knommu/siginfo.h
+++ b/arch/m68knommu/include/asm/siginfo.h
diff --git a/include/asm-m68knommu/signal.h b/arch/m68knommu/include/asm/signal.h
index 216c08be54a..216c08be54a 100644
--- a/include/asm-m68knommu/signal.h
+++ b/arch/m68knommu/include/asm/signal.h
diff --git a/include/asm-m68knommu/smp.h b/arch/m68knommu/include/asm/smp.h
index 9e9bd7e5892..9e9bd7e5892 100644
--- a/include/asm-m68knommu/smp.h
+++ b/arch/m68knommu/include/asm/smp.h
diff --git a/include/asm-m68knommu/socket.h b/arch/m68knommu/include/asm/socket.h
index ac5478bf637..ac5478bf637 100644
--- a/include/asm-m68knommu/socket.h
+++ b/arch/m68knommu/include/asm/socket.h
diff --git a/include/asm-m68knommu/sockios.h b/arch/m68knommu/include/asm/sockios.h
index dcc6a8900ce..dcc6a8900ce 100644
--- a/include/asm-m68knommu/sockios.h
+++ b/arch/m68knommu/include/asm/sockios.h
diff --git a/include/asm-m68knommu/spinlock.h b/arch/m68knommu/include/asm/spinlock.h
index 6bb1f06c478..6bb1f06c478 100644
--- a/include/asm-m68knommu/spinlock.h
+++ b/arch/m68knommu/include/asm/spinlock.h
diff --git a/include/asm-m68knommu/stat.h b/arch/m68knommu/include/asm/stat.h
index 3d4b260e7c0..3d4b260e7c0 100644
--- a/include/asm-m68knommu/stat.h
+++ b/arch/m68knommu/include/asm/stat.h
diff --git a/include/asm-m68knommu/statfs.h b/arch/m68knommu/include/asm/statfs.h
index 2ce99eaf097..2ce99eaf097 100644
--- a/include/asm-m68knommu/statfs.h
+++ b/arch/m68knommu/include/asm/statfs.h
diff --git a/include/asm-m68knommu/string.h b/arch/m68knommu/include/asm/string.h
index af09e17000f..af09e17000f 100644
--- a/include/asm-m68knommu/string.h
+++ b/arch/m68knommu/include/asm/string.h
diff --git a/include/asm-m68knommu/system.h b/arch/m68knommu/include/asm/system.h
index 40f49de6982..40f49de6982 100644
--- a/include/asm-m68knommu/system.h
+++ b/arch/m68knommu/include/asm/system.h
diff --git a/include/asm-m68knommu/termbits.h b/arch/m68knommu/include/asm/termbits.h
index 05dd6bc2728..05dd6bc2728 100644
--- a/include/asm-m68knommu/termbits.h
+++ b/arch/m68knommu/include/asm/termbits.h
diff --git a/include/asm-m68knommu/termios.h b/arch/m68knommu/include/asm/termios.h
index e7337881a98..e7337881a98 100644
--- a/include/asm-m68knommu/termios.h
+++ b/arch/m68knommu/include/asm/termios.h
diff --git a/include/asm-m68knommu/thread_info.h b/arch/m68knommu/include/asm/thread_info.h
index 0c9bc095f3f..0c9bc095f3f 100644
--- a/include/asm-m68knommu/thread_info.h
+++ b/arch/m68knommu/include/asm/thread_info.h
diff --git a/include/asm-m68knommu/timex.h b/arch/m68knommu/include/asm/timex.h
index 109050f3fe9..109050f3fe9 100644
--- a/include/asm-m68knommu/timex.h
+++ b/arch/m68knommu/include/asm/timex.h
diff --git a/include/asm-m68knommu/tlb.h b/arch/m68knommu/include/asm/tlb.h
index 77a7c51ca29..77a7c51ca29 100644
--- a/include/asm-m68knommu/tlb.h
+++ b/arch/m68knommu/include/asm/tlb.h
diff --git a/include/asm-m68knommu/tlbflush.h b/arch/m68knommu/include/asm/tlbflush.h
index a470cfb803e..a470cfb803e 100644
--- a/include/asm-m68knommu/tlbflush.h
+++ b/arch/m68knommu/include/asm/tlbflush.h
diff --git a/include/asm-m68knommu/topology.h b/arch/m68knommu/include/asm/topology.h
index ca173e9f26f..ca173e9f26f 100644
--- a/include/asm-m68knommu/topology.h
+++ b/arch/m68knommu/include/asm/topology.h
diff --git a/include/asm-m68knommu/traps.h b/arch/m68knommu/include/asm/traps.h
index d0671e5f8e2..d0671e5f8e2 100644
--- a/include/asm-m68knommu/traps.h
+++ b/arch/m68knommu/include/asm/traps.h
diff --git a/include/asm-m68knommu/types.h b/arch/m68knommu/include/asm/types.h
index 031238c2d18..031238c2d18 100644
--- a/include/asm-m68knommu/types.h
+++ b/arch/m68knommu/include/asm/types.h
diff --git a/include/asm-m68knommu/uaccess.h b/arch/m68knommu/include/asm/uaccess.h
index 68bbe9b312f..68bbe9b312f 100644
--- a/include/asm-m68knommu/uaccess.h
+++ b/arch/m68knommu/include/asm/uaccess.h
diff --git a/include/asm-m68knommu/ucontext.h b/arch/m68knommu/include/asm/ucontext.h
index 713a27f901c..713a27f901c 100644
--- a/include/asm-m68knommu/ucontext.h
+++ b/arch/m68knommu/include/asm/ucontext.h
diff --git a/include/asm-m68knommu/unaligned.h b/arch/m68knommu/include/asm/unaligned.h
index eb1ea4cb9a5..eb1ea4cb9a5 100644
--- a/include/asm-m68knommu/unaligned.h
+++ b/arch/m68knommu/include/asm/unaligned.h
diff --git a/include/asm-m68knommu/unistd.h b/arch/m68knommu/include/asm/unistd.h
index 4ba98b9c5d7..b034a2f7b44 100644
--- a/include/asm-m68knommu/unistd.h
+++ b/arch/m68knommu/include/asm/unistd.h
@@ -326,10 +326,16 @@
 #define __NR_fallocate		320
 #define __NR_timerfd_settime	321
 #define __NR_timerfd_gettime	322
+#define __NR_signalfd4		323
+#define __NR_eventfd2		324
+#define __NR_epoll_create1	325
+#define __NR_dup3		326
+#define __NR_pipe2		327
+#define __NR_inotify_init1	328
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		323
+#define NR_syscalls		329
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/include/asm-m68knommu/user.h b/arch/m68knommu/include/asm/user.h
index a5a555b761c..a5a555b761c 100644
--- a/include/asm-m68knommu/user.h
+++ b/arch/m68knommu/include/asm/user.h
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index fca2e49917a..812f8d8b7a8 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -341,6 +341,12 @@ ENTRY(sys_call_table)
 	.long sys_fallocate		/* 320 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 325 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b4c4eaa5dd2..49896a2a1d7 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3,6 +3,7 @@ config MIPS
 	default y
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
 	select RTC_LIB
@@ -34,7 +35,6 @@ config BASLER_EXCITE
 	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	help
 	  The eXcite is a smart camera platform manufactured by
 	  Basler Vision Technologies AG.
@@ -280,7 +280,6 @@ config PMC_MSP
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select IRQ_CPU
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
@@ -306,7 +305,6 @@ config PMC_YOSEMITE
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_SMP
 	help
 	  Yosemite is an evaluation board for the RM9000x2 processor
@@ -359,7 +357,6 @@ config SGI_IP27
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
 	select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -475,7 +472,6 @@ config SIBYTE_SWARM
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
 
@@ -868,7 +864,6 @@ config SOC_PNX8550
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select SYS_SUPPORTS_KGDB
 	select GENERIC_GPIO
 
 config SWAP_IO_SPACE
@@ -1891,6 +1886,15 @@ config STACKTRACE_SUPPORT
 
 source "init/Kconfig"
 
+config PROBE_INITRD_HEADER
+	bool "Probe initrd header created by addinitrd"
+	depends on BLK_DEV_INITRD
+	help
+	  Probe initrd header at the last page of kernel image.
+	  Say Y here if you are using arch/mips/boot/addinitrd.c to
+	  add initrd or initramfs image to the kernel image.
+	  Otherwise, say N.
+
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
 config HW_HAS_EISA
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index f18cf92650e..765c8e287d2 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG
 	  arch/mips/kernel/smtc.c.  This debugging option result in significant
 	  overhead so should be disabled in production kernels.
 
-config KGDB
-	bool "Remote GDB kernel debugging"
-	depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
-	select DEBUG_INFO
-	help
-	  If you say Y here, it will be possible to remotely debug the MIPS
-	  kernel using gdb. This enlarges your kernel image disk size by
-	  several megabytes and requires a machine with more than 16 MB,
-	  better 32 MB RAM to avoid excessive linking time. This is only
-	  useful for kernel hackers. If unsure, say N.
-
-config SYS_SUPPORTS_KGDB
-	bool
-
-config GDB_CONSOLE
-	bool "Console output to GDB"
-	depends on KGDB
-	help
-	  If you are using GDB for remote debugging over a serial port and
-	  would like kernel messages to be formatted into GDB $O packets so
-	  that GDB prints them as program output, say 'Y'.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
index 1fe97cccead..e4a057d80ab 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/au1000/Kconfig
@@ -134,4 +134,3 @@ config SOC_AU1X00
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
-	select SYS_SUPPORTS_KGDB
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index dd0e19dacfc..df48fd65bbf 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
 	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_PCI)		+= pci.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
deleted file mode 100644
index af5be7df2f2..00000000000
--- a/arch/mips/au1000/common/dbg_io.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <linux/types.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_KGDB
-
-/*
- * FIXME the user should be able to select the
- * uart to be used for debugging.
- */
-#define DEBUG_BASE  UART_DEBUG_BASE
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-
-#define UART_RX		0	/* Receive buffer */
-#define UART_TX		4	/* Transmit buffer */
-#define UART_IER	8	/* Interrupt Enable Register */
-#define UART_IIR	0xC	/* Interrupt ID Register */
-#define UART_FCR	0x10	/* FIFO Control Register */
-#define UART_LCR	0x14	/* Line Control Register */
-#define UART_MCR	0x18	/* Modem Control Register */
-#define UART_LSR	0x1C	/* Line Status Register */
-#define UART_MSR	0x20	/* Modem Status Register */
-#define UART_CLK	0x28	/* Baud Rat4e Clock Divider */
-#define UART_MOD_CNTRL	0x100	/* Module Control */
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y)     (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
-
-extern unsigned long calc_clock(void);
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-	if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
-		UART16550_WRITE(UART_MOD_CNTRL, 3);
-	calc_clock();
-
-	/* disable interrupts */
-	UART16550_WRITE(UART_IER, 0);
-
-	/* set up baud rate */
-	{
-		u32 divisor;
-
-		/* set divisor */
-		divisor = get_au1x00_uart_baud_base() / baud;
-		UART16550_WRITE(UART_CLK, divisor & 0xffff);
-	}
-
-	/* set data format */
-	UART16550_WRITE(UART_LCR, (data | parity | stop));
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x1) == 0);
-	return UART16550_READ(UART_RX);
-}
-
-
-int putDebugChar(u8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x40) == 0);
-	UART16550_WRITE(UART_TX, byte);
-
-	return 1;
-}
-
-#endif
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index 5ebe0de5e45..84741351496 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -57,6 +57,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 33a4aebe0cb..3bae13c2895 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -55,6 +55,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 3837365d613..8a9c7d57208 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -52,6 +52,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index 8355483f3de..7c6792308bc 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -54,7 +54,7 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 09fd63b8606..e9b2a0fd48a 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 49f51e16586..3b6e395cf95 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index 1b5f58434bb..e1055a13a1a 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index b849bf501c0..7516434760a 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
index 519142c2e4e..cff29cf46d0 100644
--- a/arch/mips/basler/excite/Makefile
+++ b/arch/mips/basler/excite/Makefile
@@ -5,5 +5,4 @@
 obj-$(CONFIG_BASLER_EXCITE)	+= excite_irq.o excite_prom.o excite_setup.o \
 				   excite_device.o excite_procfs.o
 
-obj-$(CONFIG_KGDB)		+= excite_dbg_io.o
 obj-m				+= excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c
deleted file mode 100644
index d289e3a868c..00000000000
--- a/arch/mips/basler/excite/excite_dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/gdb-stub.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
-#error Debug port used by serial driver
-#endif
-
-#define UART_CLK		25000000
-#define BASE_BAUD		(UART_CLK / 16)
-#define REGISTER_BASE_0		0x0208UL
-#define REGISTER_BASE_1		0x0238UL
-
-#define REGISTER_BASE_DBG	REGISTER_BASE_1
-
-#define CPRR	0x0004
-#define UACFG	0x0200
-#define UAINTS	0x0204
-#define UARBR	(REGISTER_BASE_DBG + 0x0000)
-#define UATHR	(REGISTER_BASE_DBG + 0x0004)
-#define UADLL	(REGISTER_BASE_DBG + 0x0008)
-#define UAIER	(REGISTER_BASE_DBG + 0x000c)
-#define UADLH	(REGISTER_BASE_DBG + 0x0010)
-#define UAIIR	(REGISTER_BASE_DBG + 0x0014)
-#define UAFCR	(REGISTER_BASE_DBG + 0x0018)
-#define UALCR	(REGISTER_BASE_DBG + 0x001c)
-#define UAMCR	(REGISTER_BASE_DBG + 0x0020)
-#define UALSR	(REGISTER_BASE_DBG + 0x0024)
-#define UAMSR	(REGISTER_BASE_DBG + 0x0028)
-#define UASCR	(REGISTER_BASE_DBG + 0x002c)
-
-#define	PARITY_NONE	0
-#define	PARITY_ODD	0x08
-#define	PARITY_EVEN	0x18
-#define	PARITY_MARK	0x28
-#define	PARITY_SPACE	0x38
-
-#define	DATA_5BIT	0x0
-#define	DATA_6BIT	0x1
-#define	DATA_7BIT	0x2
-#define	DATA_8BIT	0x3
-
-#define	STOP_1BIT	0x0
-#define	STOP_2BIT	0x4
-
-#define BAUD_DBG	57600
-#define	PARITY_DBG	PARITY_NONE
-#define	DATA_DBG	DATA_8BIT
-#define	STOP_DBG	STOP_1BIT
-
-/* Initialize the serial port for KGDB debugging */
-void __init excite_kgdb_init(void)
-{
-	const u32 divisor = BASE_BAUD / BAUD_DBG;
-
-	/* Take the UART out of reset */
-	titan_writel(0x00ff1cff, CPRR);
-	titan_writel(0x00000000, UACFG);
-	titan_writel(0x00000002, UACFG);
-
-	titan_writel(0x0, UALCR);
-	titan_writel(0x0, UAIER);
-
-	/* Disable FIFOs */
-	titan_writel(0x00, UAFCR);
-
-	titan_writel(0x80, UALCR);
-	titan_writel(divisor & 0xff, UADLL);
-	titan_writel((divisor & 0xff00) >> 8, UADLH);
-	titan_writel(0x0, UALCR);
-
-	titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
-
-	/* Enable receiver interrupt */
-	titan_readl(UARBR);
-	titan_writel(0x1, UAIER);
-}
-
-int getDebugChar(void)
-{
-	while (!(titan_readl(UALSR) & 0x1));
-	return titan_readl(UARBR);
-}
-
-int putDebugChar(int data)
-{
-	while (!(titan_readl(UALSR) & 0x20));
-	titan_writel(data, UATHR);
-	return 1;
-}
-
-/* KGDB interrupt handler */
-asmlinkage void excite_kgdb_inthdl(void)
-{
-	if (unlikely(
-		((titan_readl(UAIIR) & 0x7) == 4)
-		&& ((titan_readl(UARBR) & 0xff) == 0x3)))
-			set_async_breakpoint(&regs->cp0_epc);
-}
diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c
index 4903e067916..934e0a6b101 100644
--- a/arch/mips/basler/excite/excite_irq.c
+++ b/arch/mips/basler/excite/excite_irq.c
@@ -50,10 +50,6 @@ void __init arch_init_irq(void)
 	mips_cpu_irq_init();
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
-
-#ifdef CONFIG_KGDB
-	excite_kgdb_init();
-#endif
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void)
 	msgint	    = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
 	if ((pending & (1 << TITAN_IRQ)) && msgint) {
 		ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-#if defined(CONFIG_KGDB)
-		excite_kgdb_inthdl();
-#endif
 		do_IRQ(TITAN_IRQ);
 		return;
 	}
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 6dd8f0d46d0..d66b3b8edf2 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -95,13 +95,13 @@ static int __init excite_init_console(void)
 	/* Take the DUART out of reset */
 	titan_writel(0x00ff1cff, CPRR);
 
-#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
 	/* Enable both ports */
 	titan_writel(MASK_SER0 | MASK_SER1, UACFG);
 #else
 	/* Enable port #0 only */
 	titan_writel(MASK_SER0, UACFG);
-#endif	/* defined(CONFIG_KGDB) */
+#endif
 
  	/*
 	 * Set up serial port #0. Do not use autodetection; the result is
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 2678b7ec335..eb44b72254a 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc5
-# Thu Sep  6 13:14:29 2007
+# Linux kernel version: 2.6.26
+# Fri Jul 25 10:25:34 2008
 #
 CONFIG_MIPS=y
 
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
@@ -24,6 +26,7 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -34,19 +37,25 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_GT641XX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
@@ -108,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -115,10 +125,16 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -151,23 +167,28 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -177,23 +198,37 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -207,18 +242,18 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -232,8 +267,8 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -250,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -269,6 +305,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -294,10 +329,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -305,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -326,9 +358,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -337,6 +372,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -350,6 +386,7 @@ CONFIG_MTD_BLKDEVS=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -384,6 +421,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -423,7 +461,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -462,10 +502,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -475,7 +520,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -504,7 +548,9 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
@@ -518,29 +564,27 @@ CONFIG_ATA=y
 CONFIG_PATA_VIA=y
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -562,7 +606,12 @@ CONFIG_TULIP=y
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -572,6 +621,7 @@ CONFIG_TULIP=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -580,7 +630,6 @@ CONFIG_TULIP=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -588,7 +637,6 @@ CONFIG_TULIP=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -607,7 +655,6 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -642,7 +689,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -664,65 +713,122 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_COBALT_LCD=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_COBALT=y
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -743,6 +849,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -751,15 +858,18 @@ CONFIG_USB=m
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -773,6 +883,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -785,6 +896,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -793,6 +905,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -800,15 +913,11 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -833,16 +942,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -858,6 +961,8 @@ CONFIG_LEDS_COBALT_RAQ=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -882,9 +987,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -892,23 +998,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -923,22 +1013,22 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -967,7 +1057,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -983,32 +1072,28 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1022,34 +1107,26 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 
 #
@@ -1057,14 +1134,95 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index ebb8ad62b3a..a279165e3a7 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index ad4e5ef6559..8944d15caf1 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index d0dc2e83ad3..ab17973107f 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=48M"
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 9155082313c..b65803f1935 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index e4e324422cd..a190ac07740 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 3572e80356d..4e465e94599 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 138c575a015..831d3e5a1ea 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index 59d19472b16..dd13db4d0fb 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index bacf0dd0e34..db9272677aa 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 6dfe6f793ce..9e21e333a2f 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index c965a87e6a9..af67ed4f71a 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 0778996c682..7956f56cbf3 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 37c7b5ffd47..723bd5176a3 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 893e5c4ab66..b5052fb42e9 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index e42aed5a38b..c7c0864b8ce 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 1ea97865f2c..a9acaa2f9da 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_SB1XXX_CORELIS is not set
 
 #
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 7f86c43d1bd..ea8249c75b3 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c
index 11567702b15..d70627de7cf 100644
--- a/arch/mips/emma2rh/markeins/platform.c
+++ b/arch/mips/emma2rh/markeins/platform.c
@@ -34,7 +34,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 62bfb455d1b..b6a23ad539f 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -25,25 +25,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/initrd.h>
-#include <linux/irq.h>
-#include <linux/ide.h>
-#include <linux/ioport.h>
-#include <linux/param.h>	/* for HZ */
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
+
 #include <asm/time.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
-#include <asm/traps.h>
-#include <asm/debug.h>
 
 #include <asm/emma2rh/emma2rh.h>
 
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index f60524e8bc4..7043f6b9ff3 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -5,35 +5,22 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1996, 1997, 1998, 2001, 07 by Ralf Baechle
+ * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle
  * Copyright (C) 2001 MIPS Technologies, Inc.
  * Copyright (C) 2007 by Thomas Bogendoerfer
  */
 #include <linux/eisa.h>
-#include <linux/hdreg.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
 #include <linux/console.h>
-#include <linux/fb.h>
-#include <linux/ide.h>
-#include <linux/pm.h>
 #include <linux/screen_info.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
 #include <asm/jazz.h>
 #include <asm/jazzdma.h>
 #include <asm/reboot.h>
-#include <asm/io.h>
 #include <asm/pgtable.h>
-#include <asm/time.h>
-#include <asm/traps.h>
-#include <asm/mc146818-time.h>
 
 extern asmlinkage void jazz_handle_int(void);
 
diff --git a/arch/mips/kernel/.gitignore b/arch/mips/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/mips/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 0fd31974ba2..706f9397479 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -71,7 +71,7 @@ obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
 
-obj-$(CONFIG_KGDB)		+= gdb-low.o gdb-stub.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 335a6ae3d59..11c92dc5379 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -45,18 +45,7 @@ static void r39xx_wait(void)
 	local_irq_enable();
 }
 
-/*
- * There is a race when WAIT instruction executed with interrupt
- * enabled.
- * But it is implementation-dependent wheter the pipelie restarts when
- * a non-enabled interrupt is requested.
- */
-static void r4k_wait(void)
-{
-	__asm__("	.set	mips3			\n"
-		"	wait				\n"
-		"	.set	mips0			\n");
-}
+extern void r4k_wait(void);
 
 /*
  * This variant is preferable as it allows testing need_resched and going to
@@ -128,7 +117,7 @@ static int __init wait_disable(char *s)
 
 __setup("nowait", wait_disable);
 
-static inline void check_wait(void)
+void __init check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
@@ -242,7 +231,6 @@ static inline void check_errata(void)
 
 void __init check_bugs32(void)
 {
-	check_wait();
 	check_errata();
 }
 
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
deleted file mode 100644
index 2c446063636..00000000000
--- a/arch/mips/kernel/gdb-low.S
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * gdb-low.S contains the low-level trap handler for the GDB stub.
- *
- * Copyright (C) 1995 Andreas Busse
- */
-#include <linux/sys.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/irqflags.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/gdb-stub.h>
-
-#ifdef CONFIG_32BIT
-#define DMFC0	mfc0
-#define DMTC0	mtc0
-#define LDC1	lwc1
-#define SDC1	lwc1
-#endif
-#ifdef CONFIG_64BIT
-#define DMFC0	dmfc0
-#define DMTC0	dmtc0
-#define LDC1	ldc1
-#define SDC1	ldc1
-#endif
-
-/*
- * [jsun] We reserves about 2x GDB_FR_SIZE in stack.  The lower (addressed)
- * part is used to store registers and passed to exception handler.
- * The upper part is reserved for "call func" feature where gdb client
- * saves some of the regs, setups call frame and passes args.
- *
- * A trace shows about 200 bytes are used to store about half of all regs.
- * The rest should be big enough for frame setup and passing args.
- */
-
-/*
- * The low level trap handler
- */
-		.align 	5
-		NESTED(trap_low, GDB_FR_SIZE, sp)
-		.set	noat
-		.set 	noreorder
-
-		mfc0	k0, CP0_STATUS
-		sll	k0, 3     		/* extract cu0 bit */
-		bltz	k0, 1f
-		move	k1, sp
-
-		/*
-		 * Called from user mode, go somewhere else.
-		 */
-		mfc0	k0, CP0_CAUSE
-		andi	k0, k0, 0x7c
-#ifdef CONFIG_64BIT
-		dsll	k0, k0, 1
-#endif
-		PTR_L	k1, saved_vectors(k0)
-		jr	k1
-		nop
-1:
-		move	k0, sp
-		PTR_SUBU sp, k1, GDB_FR_SIZE*2	# see comment above
-		LONG_S	k0, GDB_FR_REG29(sp)
-		LONG_S	$2, GDB_FR_REG2(sp)
-
-/*
- * First save the CP0 and special registers
- */
-
-		mfc0	v0, CP0_STATUS
-		LONG_S	v0, GDB_FR_STATUS(sp)
-		mfc0	v0, CP0_CAUSE
-		LONG_S	v0, GDB_FR_CAUSE(sp)
-		DMFC0	v0, CP0_EPC
-		LONG_S	v0, GDB_FR_EPC(sp)
-		DMFC0	v0, CP0_BADVADDR
-		LONG_S	v0, GDB_FR_BADVADDR(sp)
-		mfhi	v0
-		LONG_S	v0, GDB_FR_HI(sp)
-		mflo	v0
-		LONG_S	v0, GDB_FR_LO(sp)
-
-/*
- * Now the integer registers
- */
-
-		LONG_S	zero, GDB_FR_REG0(sp)		/* I know... */
-		LONG_S	$1, GDB_FR_REG1(sp)
-		/* v0 already saved */
-		LONG_S	$3, GDB_FR_REG3(sp)
-		LONG_S	$4, GDB_FR_REG4(sp)
-		LONG_S	$5, GDB_FR_REG5(sp)
-		LONG_S	$6, GDB_FR_REG6(sp)
-		LONG_S	$7, GDB_FR_REG7(sp)
-		LONG_S	$8, GDB_FR_REG8(sp)
-		LONG_S	$9, GDB_FR_REG9(sp)
-		LONG_S	$10, GDB_FR_REG10(sp)
-		LONG_S	$11, GDB_FR_REG11(sp)
-		LONG_S	$12, GDB_FR_REG12(sp)
-		LONG_S	$13, GDB_FR_REG13(sp)
-		LONG_S	$14, GDB_FR_REG14(sp)
-		LONG_S	$15, GDB_FR_REG15(sp)
-		LONG_S	$16, GDB_FR_REG16(sp)
-		LONG_S	$17, GDB_FR_REG17(sp)
-		LONG_S	$18, GDB_FR_REG18(sp)
-		LONG_S	$19, GDB_FR_REG19(sp)
-		LONG_S	$20, GDB_FR_REG20(sp)
-		LONG_S	$21, GDB_FR_REG21(sp)
-		LONG_S	$22, GDB_FR_REG22(sp)
-		LONG_S	$23, GDB_FR_REG23(sp)
-		LONG_S	$24, GDB_FR_REG24(sp)
-		LONG_S	$25, GDB_FR_REG25(sp)
-		LONG_S	$26, GDB_FR_REG26(sp)
-		LONG_S	$27, GDB_FR_REG27(sp)
-		LONG_S	$28, GDB_FR_REG28(sp)
-		/* sp already saved */
-		LONG_S	$30, GDB_FR_REG30(sp)
-		LONG_S	$31, GDB_FR_REG31(sp)
-
-		CLI				/* disable interrupts */
-		TRACE_IRQS_OFF
-
-/*
- * Followed by the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* FPU enabled? */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0,2f			/* disabled, skip */
-		 nop
-
-		SDC1	$0, GDB_FR_FPR0(sp)
-		SDC1	$1, GDB_FR_FPR1(sp)
-		SDC1	$2, GDB_FR_FPR2(sp)
-		SDC1	$3, GDB_FR_FPR3(sp)
-		SDC1	$4, GDB_FR_FPR4(sp)
-		SDC1	$5, GDB_FR_FPR5(sp)
-		SDC1	$6, GDB_FR_FPR6(sp)
-		SDC1	$7, GDB_FR_FPR7(sp)
-		SDC1	$8, GDB_FR_FPR8(sp)
-		SDC1	$9, GDB_FR_FPR9(sp)
-		SDC1	$10, GDB_FR_FPR10(sp)
-		SDC1	$11, GDB_FR_FPR11(sp)
-		SDC1	$12, GDB_FR_FPR12(sp)
-		SDC1	$13, GDB_FR_FPR13(sp)
-		SDC1	$14, GDB_FR_FPR14(sp)
-		SDC1	$15, GDB_FR_FPR15(sp)
-		SDC1	$16, GDB_FR_FPR16(sp)
-		SDC1	$17, GDB_FR_FPR17(sp)
-		SDC1	$18, GDB_FR_FPR18(sp)
-		SDC1	$19, GDB_FR_FPR19(sp)
-		SDC1	$20, GDB_FR_FPR20(sp)
-		SDC1	$21, GDB_FR_FPR21(sp)
-		SDC1	$22, GDB_FR_FPR22(sp)
-		SDC1	$23, GDB_FR_FPR23(sp)
-		SDC1	$24, GDB_FR_FPR24(sp)
-		SDC1	$25, GDB_FR_FPR25(sp)
-		SDC1	$26, GDB_FR_FPR26(sp)
-		SDC1	$27, GDB_FR_FPR27(sp)
-		SDC1	$28, GDB_FR_FPR28(sp)
-		SDC1	$29, GDB_FR_FPR29(sp)
-		SDC1	$30, GDB_FR_FPR30(sp)
-		SDC1	$31, GDB_FR_FPR31(sp)
-
-/*
- * FPU control registers
- */
-
-		cfc1	v0, CP1_STATUS
-		LONG_S	v0, GDB_FR_FSR(sp)
-		cfc1	v0, CP1_REVISION
-		LONG_S	v0, GDB_FR_FIR(sp)
-
-/*
- * Current stack frame ptr
- */
-
-2:
-		LONG_S	sp, GDB_FR_FRP(sp)
-
-/*
- * CP0 registers (R4000/R4400 unused registers skipped)
- */
-
-		mfc0	v0, CP0_INDEX
-		LONG_S	v0, GDB_FR_CP0_INDEX(sp)
-		mfc0	v0, CP0_RANDOM
-		LONG_S	v0, GDB_FR_CP0_RANDOM(sp)
-		DMFC0	v0, CP0_ENTRYLO0
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		DMFC0	v0, CP0_ENTRYLO1
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO1(sp)
-		DMFC0	v0, CP0_CONTEXT
-		LONG_S	v0, GDB_FR_CP0_CONTEXT(sp)
-		mfc0	v0, CP0_PAGEMASK
-		LONG_S	v0, GDB_FR_CP0_PAGEMASK(sp)
-		mfc0	v0, CP0_WIRED
-		LONG_S	v0, GDB_FR_CP0_WIRED(sp)
-		DMFC0	v0, CP0_ENTRYHI
-		LONG_S	v0, GDB_FR_CP0_ENTRYHI(sp)
-		mfc0	v0, CP0_PRID
-		LONG_S	v0, GDB_FR_CP0_PRID(sp)
-
-		.set	at
-
-/*
- * Continue with the higher level handler
- */
-
-		move	a0,sp
-
-		jal	handle_exception
-		 nop
-
-/*
- * Restore all writable registers, in reverse order
- */
-
-		.set	noat
-
-		LONG_L	v0, GDB_FR_CP0_ENTRYHI(sp)
-		LONG_L	v1, GDB_FR_CP0_WIRED(sp)
-		DMTC0	v0, CP0_ENTRYHI
-		mtc0	v1, CP0_WIRED
-		LONG_L	v0, GDB_FR_CP0_PAGEMASK(sp)
-		LONG_L	v1, GDB_FR_CP0_ENTRYLO1(sp)
-		mtc0	v0, CP0_PAGEMASK
-		DMTC0	v1, CP0_ENTRYLO1
-		LONG_L	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		LONG_L	v1, GDB_FR_CP0_INDEX(sp)
-		DMTC0	v0, CP0_ENTRYLO0
-		LONG_L	v0, GDB_FR_CP0_CONTEXT(sp)
-		mtc0	v1, CP0_INDEX
-		DMTC0	v0, CP0_CONTEXT
-
-
-/*
- * Next, the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* check if the FPU is enabled */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0, 3f			/* disabled, skip */
-		 nop
-
-		LDC1	$31, GDB_FR_FPR31(sp)
-		LDC1	$30, GDB_FR_FPR30(sp)
-		LDC1	$29, GDB_FR_FPR29(sp)
-		LDC1	$28, GDB_FR_FPR28(sp)
-		LDC1	$27, GDB_FR_FPR27(sp)
-		LDC1	$26, GDB_FR_FPR26(sp)
-		LDC1	$25, GDB_FR_FPR25(sp)
-		LDC1	$24, GDB_FR_FPR24(sp)
-		LDC1	$23, GDB_FR_FPR23(sp)
-		LDC1	$22, GDB_FR_FPR22(sp)
-		LDC1	$21, GDB_FR_FPR21(sp)
-		LDC1	$20, GDB_FR_FPR20(sp)
-		LDC1	$19, GDB_FR_FPR19(sp)
-		LDC1	$18, GDB_FR_FPR18(sp)
-		LDC1	$17, GDB_FR_FPR17(sp)
-		LDC1	$16, GDB_FR_FPR16(sp)
-		LDC1	$15, GDB_FR_FPR15(sp)
-		LDC1	$14, GDB_FR_FPR14(sp)
-		LDC1	$13, GDB_FR_FPR13(sp)
-		LDC1	$12, GDB_FR_FPR12(sp)
-		LDC1	$11, GDB_FR_FPR11(sp)
-		LDC1	$10, GDB_FR_FPR10(sp)
-		LDC1	$9, GDB_FR_FPR9(sp)
-		LDC1	$8, GDB_FR_FPR8(sp)
-		LDC1	$7, GDB_FR_FPR7(sp)
-		LDC1	$6, GDB_FR_FPR6(sp)
-		LDC1	$5, GDB_FR_FPR5(sp)
-		LDC1	$4, GDB_FR_FPR4(sp)
-		LDC1	$3, GDB_FR_FPR3(sp)
-		LDC1	$2, GDB_FR_FPR2(sp)
-		LDC1	$1, GDB_FR_FPR1(sp)
-		LDC1	$0, GDB_FR_FPR0(sp)
-
-/*
- * Now the CP0 and integer registers
- */
-
-3:
-#ifdef CONFIG_MIPS_MT_SMTC
-		/* Read-modify write of Status must be atomic */
-		mfc0	t2, CP0_TCSTATUS
-		ori	t1, t2, TCSTATUS_IXMT
-		mtc0	t1, CP0_TCSTATUS
-		andi	t2, t2, TCSTATUS_IXMT
-		_ehb
-		DMT	9				# dmt	t1
-		jal	mips_ihb
-		nop
-#endif /* CONFIG_MIPS_MT_SMTC */
-		mfc0	t0, CP0_STATUS
-		ori	t0, 0x1f
-		xori	t0, 0x1f
-		mtc0	t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-        	andi    t1, t1, VPECONTROL_TE
-        	beqz    t1, 9f
-		nop
-        	EMT					# emt
-9:
-		mfc0	t1, CP0_TCSTATUS
-		xori	t1, t1, TCSTATUS_IXMT
-		or	t1, t1, t2
-		mtc0	t1, CP0_TCSTATUS
-		_ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
-		LONG_L	v0, GDB_FR_STATUS(sp)
-		LONG_L	v1, GDB_FR_EPC(sp)
-		mtc0	v0, CP0_STATUS
-		DMTC0	v1, CP0_EPC
-		LONG_L	v0, GDB_FR_HI(sp)
-		LONG_L	v1, GDB_FR_LO(sp)
-		mthi	v0
-		mtlo	v1
-		LONG_L	$31, GDB_FR_REG31(sp)
-		LONG_L	$30, GDB_FR_REG30(sp)
-		LONG_L	$28, GDB_FR_REG28(sp)
-		LONG_L	$27, GDB_FR_REG27(sp)
-		LONG_L	$26, GDB_FR_REG26(sp)
-		LONG_L	$25, GDB_FR_REG25(sp)
-		LONG_L	$24, GDB_FR_REG24(sp)
-		LONG_L	$23, GDB_FR_REG23(sp)
-		LONG_L	$22, GDB_FR_REG22(sp)
-		LONG_L	$21, GDB_FR_REG21(sp)
-		LONG_L	$20, GDB_FR_REG20(sp)
-		LONG_L	$19, GDB_FR_REG19(sp)
-		LONG_L	$18, GDB_FR_REG18(sp)
-		LONG_L	$17, GDB_FR_REG17(sp)
-		LONG_L	$16, GDB_FR_REG16(sp)
-		LONG_L	$15, GDB_FR_REG15(sp)
-		LONG_L	$14, GDB_FR_REG14(sp)
-		LONG_L	$13, GDB_FR_REG13(sp)
-		LONG_L	$12, GDB_FR_REG12(sp)
-		LONG_L	$11, GDB_FR_REG11(sp)
-		LONG_L	$10, GDB_FR_REG10(sp)
-		LONG_L	$9, GDB_FR_REG9(sp)
-		LONG_L	$8, GDB_FR_REG8(sp)
-		LONG_L	$7, GDB_FR_REG7(sp)
-		LONG_L	$6, GDB_FR_REG6(sp)
-		LONG_L	$5, GDB_FR_REG5(sp)
-		LONG_L	$4, GDB_FR_REG4(sp)
-		LONG_L	$3, GDB_FR_REG3(sp)
-		LONG_L	$2, GDB_FR_REG2(sp)
-		LONG_L	$1, GDB_FR_REG1(sp)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
-		LONG_L	k0, GDB_FR_EPC(sp)
-		LONG_L	$29, GDB_FR_REG29(sp)		/* Deallocate stack */
-		jr	k0
-		rfe
-#else
-		LONG_L	sp, GDB_FR_REG29(sp)		/* Deallocate stack */
-
-		.set	mips3
-		eret
-		.set	mips0
-#endif
-		.set	at
-		.set	reorder
-		END(trap_low)
-
-LEAF(kgdb_read_byte)
-4:		lb	t0, (a0)
-		sb	t0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	4b, kgdbfault
-		.previous
-		END(kgdb_read_byte)
-
-LEAF(kgdb_write_byte)
-5:		sb	a0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	5b, kgdbfault
-		.previous
-		END(kgdb_write_byte)
-
-		.type	kgdbfault@function
-		.ent	kgdbfault
-
-kgdbfault:	li	v0, -EFAULT
-		jr	ra
-		.end	kgdbfault
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
deleted file mode 100644
index 25f4eab8ea9..00000000000
--- a/arch/mips/kernel/gdb-stub.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/*
- *  arch/mips/kernel/gdb-stub.c
- *
- *  Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- *  Contributed by HP Systems
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- *  Copyright (C) 1995 Andreas Busse
- *
- *  Copyright (C) 2003 MontaVista Software Inc.
- *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-/*
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a BREAK instruction.
- *
- *
- *    The following gdb commands are supported:
- *
- * command          function                               Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
- *							   baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- *
- *  ==============
- *  MORE EXAMPLES:
- *  ==============
- *
- *  For reference -- the following are the steps that one
- *  company took (RidgeRun Inc) to get remote gdb debugging
- *  going. In this scenario the host machine was a PC and the
- *  target platform was a Galileo EVB64120A MIPS evaluation
- *  board.
- *
- *  Step 1:
- *  First download gdb-5.0.tar.gz from the internet.
- *  and then build/install the package.
- *
- *  Example:
- *    $ tar zxf gdb-5.0.tar.gz
- *    $ cd gdb-5.0
- *    $ ./configure --target=mips-linux-elf
- *    $ make
- *    $ install
- *    $ which mips-linux-elf-gdb
- *    /usr/local/bin/mips-linux-elf-gdb
- *
- *  Step 2:
- *  Configure linux for remote debugging and build it.
- *
- *  Example:
- *    $ cd ~/linux
- *    $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- *    $ make
- *
- *  Step 3:
- *  Download the kernel to the remote target and start
- *  the kernel running. It will promptly halt and wait
- *  for the host gdb session to connect. It does this
- *  since the "Kernel Hacking" option has defined
- *  CONFIG_KGDB which in turn enables your calls
- *  to:
- *     set_debug_traps();
- *     breakpoint();
- *
- *  Step 4:
- *  Start the gdb session on the host.
- *
- *  Example:
- *    $ mips-linux-elf-gdb vmlinux
- *    (gdb) set remotebaud 115200
- *    (gdb) target remote /dev/ttyS1
- *    ...at this point you are connected to
- *       the remote target and can use gdb
- *       in the normal fasion. Setting
- *       breakpoints, single stepping,
- *       printing variables, etc.
- */
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-
-#include <asm/asm.h>
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/gdb-stub.h>
-#include <asm/inst.h>
-
-/*
- * external low-level support routines
- */
-
-extern int putDebugChar(char c);    /* write a single character      */
-extern char getDebugChar(void);     /* read and return a single char */
-extern void trap_low(void);
-
-/*
- * breakpoint and test functions
- */
-extern void breakpoint(void);
-extern void breakinst(void);
-extern void async_breakpoint(void);
-extern void async_breakinst(void);
-extern void adel(void);
-
-/*
- * local prototypes
- */
-
-static void getpacket(char *buffer);
-static void putpacket(char *buffer);
-static int computeSignal(int tt);
-static int hex(unsigned char ch);
-static int hexToInt(char **ptr, int *intValue);
-static int hexToLong(char **ptr, long *longValue);
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
-void handle_exception(struct gdb_regs *regs);
-
-int kgdb_enabled;
-
-/*
- * spin locks for smp case
- */
-static DEFINE_SPINLOCK(kgdb_lock);
-static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
-	[0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
-};
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-static int initialized;	/* !0 means we've been initialized */
-static int kgdb_started;
-static const char hexchars[]="0123456789abcdef";
-
-/* Used to prevent crashes in memory access.  Note that they'll crash anyway if
-   we haven't set up fault handlers yet... */
-int kgdb_read_byte(unsigned char *address, unsigned char *dest);
-int kgdb_write_byte(unsigned char val, unsigned char *dest);
-
-/*
- * Convert ch from a hex digit to an int
- */
-static int hex(unsigned char ch)
-{
-	if (ch >= 'a' && ch <= 'f')
-		return ch-'a'+10;
-	if (ch >= '0' && ch <= '9')
-		return ch-'0';
-	if (ch >= 'A' && ch <= 'F')
-		return ch-'A'+10;
-	return -1;
-}
-
-/*
- * scan for the sequence $<data>#<checksum>
- */
-static void getpacket(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int i;
-	int count;
-	unsigned char ch;
-
-	do {
-		/*
-		 * wait around for the start character,
-		 * ignore all other characters
-		 */
-		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-		checksum = 0;
-		xmitcsum = -1;
-		count = 0;
-
-		/*
-		 * now, read until a # or end of buffer is found
-		 */
-		while (count < BUFMAX) {
-			ch = getDebugChar();
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-
-		if (count >= BUFMAX)
-			continue;
-
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-			xmitcsum |= hex(getDebugChar() & 0x7f);
-
-			if (checksum != xmitcsum)
-				putDebugChar('-');	/* failed checksum */
-			else {
-				putDebugChar('+'); /* successful transfer */
-
-				/*
-				 * if a sequence char is present,
-				 * reply the sequence ID
-				 */
-				if (buffer[2] == ':') {
-					putDebugChar(buffer[0]);
-					putDebugChar(buffer[1]);
-
-					/*
-					 * remove sequence chars from buffer
-					 */
-					count = strlen(buffer);
-					for (i=3; i <= count; i++)
-						buffer[i-3] = buffer[i];
-				}
-			}
-		}
-	}
-	while (checksum != xmitcsum);
-}
-
-/*
- * send the packet in buffer.
- */
-static void putpacket(char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	unsigned char ch;
-
-	/*
-	 * $<packet info>#<checksum>.
-	 */
-
-	do {
-		putDebugChar('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count]) != 0) {
-			if (!(putDebugChar(ch)))
-				return;
-			checksum += ch;
-			count += 1;
-		}
-
-		putDebugChar('#');
-		putDebugChar(hexchars[checksum >> 4]);
-		putDebugChar(hexchars[checksum & 0xf]);
-
-	}
-	while ((getDebugChar() & 0x7f) != '+');
-}
-
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
-{
-	unsigned char ch;
-
-	while (count-- > 0) {
-		if (kgdb_read_byte(mem++, &ch) != 0)
-			return 0;
-		*buf++ = hexchars[ch >> 4];
-		*buf++ = hexchars[ch & 0xf];
-	}
-
-	*buf = 0;
-
-	return buf;
-}
-
-/*
- * convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
-{
-	int i;
-	unsigned char ch;
-
-	for (i=0; i<count; i++)
-	{
-		if (binary) {
-			ch = *buf++;
-			if (ch == 0x7d)
-				ch = 0x20 ^ *buf++;
-		}
-		else {
-			ch = hex(*buf++) << 4;
-			ch |= hex(*buf++);
-		}
-		if (kgdb_write_byte(ch, mem++) != 0)
-			return 0;
-	}
-
-	return mem;
-}
-
-/*
- * This table contains the mapping between SPARC hardware trap types, and
- * signals, which are primarily what GDB understands.  It also indicates
- * which hardware traps we need to commandeer when initializing the stub.
- */
-static struct hard_trap_info {
-	unsigned char tt;		/* Trap type code for MIPS R3xxx and R4xxx */
-	unsigned char signo;		/* Signal that we map this trap into */
-} hard_trap_info[] = {
-	{ 6, SIGBUS },			/* instruction bus error */
-	{ 7, SIGBUS },			/* data bus error */
-	{ 9, SIGTRAP },			/* break */
-	{ 10, SIGILL },			/* reserved instruction */
-/*	{ 11, SIGILL },		*/	/* CPU unusable */
-	{ 12, SIGFPE },			/* overflow */
-	{ 13, SIGTRAP },		/* trap */
-	{ 14, SIGSEGV },		/* virtual instruction cache coherency */
-	{ 15, SIGFPE },			/* floating point exception */
-	{ 23, SIGSEGV },		/* watch */
-	{ 31, SIGSEGV },		/* virtual data cache coherency */
-	{ 0, 0}				/* Must be last */
-};
-
-/* Save the normal trap handlers for user-mode traps. */
-void *saved_vectors[32];
-
-/*
- * Set up exception handlers for tracing and breakpoints
- */
-void set_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-	unsigned char c;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
-
-	putDebugChar('+'); /* 'hello world' */
-	/*
-	 * In case GDB is started before us, ack any packets
-	 * (presumably "$?#xx") sitting there.
-	 */
-	while((c = getDebugChar()) != '$');
-	while((c = getDebugChar()) != '#');
-	c = getDebugChar(); /* eat first csum byte */
-	c = getDebugChar(); /* eat second csum byte */
-	putDebugChar('+'); /* ack it */
-
-	initialized = 1;
-	local_irq_restore(flags);
-}
-
-void restore_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		set_except_vector(ht->tt, saved_vectors[ht->tt]);
-	local_irq_restore(flags);
-}
-
-/*
- * Convert the MIPS hardware trap type code to a Unix signal number.
- */
-static int computeSignal(int tt)
-{
-	struct hard_trap_info *ht;
-
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		if (ht->tt == tt)
-			return ht->signo;
-
-	return SIGHUP;		/* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int hexToInt(char **ptr, int *intValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*intValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*intValue = (*intValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return (numChars);
-}
-
-static int hexToLong(char **ptr, long *longValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*longValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*longValue = (*longValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return numChars;
-}
-
-
-#if 0
-/*
- * Print registers (on target console)
- * Used only to debug the stub...
- */
-void show_gdbregs(struct gdb_regs * regs)
-{
-	/*
-	 * Saved main processor registers
-	 */
-	printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg0, regs->reg1, regs->reg2, regs->reg3,
-	       regs->reg4, regs->reg5, regs->reg6, regs->reg7);
-	printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg8, regs->reg9, regs->reg10, regs->reg11,
-	       regs->reg12, regs->reg13, regs->reg14, regs->reg15);
-	printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg16, regs->reg17, regs->reg18, regs->reg19,
-	       regs->reg20, regs->reg21, regs->reg22, regs->reg23);
-	printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg24, regs->reg25, regs->reg26, regs->reg27,
-	       regs->reg28, regs->reg29, regs->reg30, regs->reg31);
-
-	/*
-	 * Saved cp0 registers
-	 */
-	printk("epc  : %08lx\nStatus: %08lx\nCause : %08lx\n",
-	       regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
-}
-#endif /* dead code */
-
-/*
- * We single-step by setting breakpoints. When an exception
- * is handled, we need to restore the instructions hoisted
- * when the breakpoints were set.
- *
- * This is where we save the original instructions.
- */
-static struct gdb_bp_save {
-	unsigned long addr;
-	unsigned int val;
-} step_bp[2];
-
-#define BP 0x0000000d  /* break opcode */
-
-/*
- * Set breakpoint instructions for single stepping.
- */
-static void single_step(struct gdb_regs *regs)
-{
-	union mips_instruction insn;
-	unsigned long targ;
-	int is_branch, is_cond, i;
-
-	targ = regs->cp0_epc;
-	insn.word = *(unsigned int *)targ;
-	is_branch = is_cond = 0;
-
-	switch (insn.i_format.opcode) {
-	/*
-	 * jr and jalr are in r_format format.
-	 */
-	case spec_op:
-		switch (insn.r_format.func) {
-		case jalr_op:
-		case jr_op:
-			targ = *(&regs->reg0 + insn.r_format.rs);
-			is_branch = 1;
-			break;
-		}
-		break;
-
-	/*
-	 * This group contains:
-	 * bltz_op, bgez_op, bltzl_op, bgezl_op,
-	 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
-	 */
-	case bcond_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-
-	/*
-	 * These are unconditional and in j_format.
-	 */
-	case jal_op:
-	case j_op:
-		is_branch = 1;
-		targ += 4;
-		targ >>= 28;
-		targ <<= 28;
-		targ |= (insn.j_format.target << 2);
-		break;
-
-	/*
-	 * These are conditional.
-	 */
-	case beq_op:
-	case beql_op:
-	case bne_op:
-	case bnel_op:
-	case blez_op:
-	case blezl_op:
-	case bgtz_op:
-	case bgtzl_op:
-	case cop0_op:
-	case cop1_op:
-	case cop2_op:
-	case cop1x_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-	}
-
-	if (is_branch) {
-		i = 0;
-		if (is_cond && targ != (regs->cp0_epc + 8)) {
-			step_bp[i].addr = regs->cp0_epc + 8;
-			step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
-			*(unsigned *)(regs->cp0_epc + 8) = BP;
-		}
-		step_bp[i].addr = targ;
-		step_bp[i].val  = *(unsigned *)targ;
-		*(unsigned *)targ = BP;
-	} else {
-		step_bp[0].addr = regs->cp0_epc + 4;
-		step_bp[0].val  = *(unsigned *)(regs->cp0_epc + 4);
-		*(unsigned *)(regs->cp0_epc + 4) = BP;
-	}
-}
-
-/*
- *  If asynchronously interrupted by gdb, then we need to set a breakpoint
- *  at the interrupted instruction so that we wind up stopped with a
- *  reasonable stack frame.
- */
-static struct gdb_bp_save async_bp;
-
-/*
- * Swap the interrupted EPC with our asynchronous breakpoint routine.
- * This is safer than stuffing the breakpoint in-place, since no cache
- * flushes (or resulting smp_call_functions) are required.  The
- * assumption is that only one CPU will be handling asynchronous bp's,
- * and only one can be active at a time.
- */
-extern spinlock_t smp_call_lock;
-
-void set_async_breakpoint(unsigned long *epc)
-{
-	/* skip breaking into userland */
-	if ((*epc & 0x80000000) == 0)
-		return;
-
-#ifdef CONFIG_SMP
-	/* avoid deadlock if someone is make IPC */
-	if (spin_is_locked(&smp_call_lock))
-		return;
-#endif
-
-	async_bp.addr = *epc;
-	*epc = (unsigned long)async_breakpoint;
-}
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(void *arg)
-{
-	unsigned flags;
-	int cpu = smp_processor_id();
-
-	local_irq_save(flags);
-
-	__raw_spin_lock(&kgdb_cpulock[cpu]);
-	__raw_spin_unlock(&kgdb_cpulock[cpu]);
-
-	local_irq_restore(flags);
-}
-#endif
-
-/*
- * GDB stub needs to call kgdb_wait on all processor with interrupts
- * disabled, so it uses it's own special variant.
- */
-static int kgdb_smp_call_kgdb_wait(void)
-{
-#ifdef CONFIG_SMP
-	cpumask_t mask = cpu_online_map;
-	struct call_data_struct data;
-	int cpu = smp_processor_id();
-	int cpus;
-
-	/*
-	 * Can die spectacularly if this CPU isn't yet marked online
-	 */
-	BUG_ON(!cpu_online(cpu));
-
-	cpu_clear(cpu, mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		return 0;
-
-	if (spin_is_locked(&smp_call_lock)) {
-		/*
-		 * Some other processor is trying to make us do something
-		 * but we're not going to respond... give up
-		 */
-		return -1;
-		}
-
-	/*
-	 * We will continue here, accepting the fact that
-	 * the kernel may deadlock if another CPU attempts
-	 * to call smp_call_function now...
-	 */
-
-	data.func = kgdb_wait;
-	data.info = NULL;
-	atomic_set(&data.started, 0);
-	data.wait = 0;
-
-	spin_lock(&smp_call_lock);
-	call_data = &data;
-	mb();
-
-	core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
-	/* Wait for response */
-	/* FIXME: lock-up detection, backtrace on lock-up */
-	while (atomic_read(&data.started) != cpus)
-		barrier();
-
-	call_data = NULL;
-	spin_unlock(&smp_call_lock);
-#endif
-
-	return 0;
-}
-
-/*
- * This function does all command processing for interfacing to gdb.  It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-void handle_exception(struct gdb_regs *regs)
-{
-	int trap;			/* Trap type */
-	int sigval;
-	long addr;
-	int length;
-	char *ptr;
-	unsigned long *stack;
-	int i;
-	int bflag = 0;
-
-	kgdb_started = 1;
-
-	/*
-	 * acquire the big kgdb spinlock
-	 */
-	if (!spin_trylock(&kgdb_lock)) {
-		/*
-		 * some other CPU has the lock, we should go back to
-		 * receive the gdb_wait IPC
-		 */
-		return;
-	}
-
-	/*
-	 * If we're in async_breakpoint(), restore the real EPC from
-	 * the breakpoint.
-	 */
-	if (regs->cp0_epc == (unsigned long)async_breakinst) {
-		regs->cp0_epc = async_bp.addr;
-		async_bp.addr = 0;
-	}
-
-	/*
-	 * acquire the CPU spinlocks
-	 */
-	for_each_online_cpu(i)
-		if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
-			panic("kgdb: couldn't get cpulock %d\n", i);
-
-	/*
-	 * force other cpus to enter kgdb
-	 */
-	kgdb_smp_call_kgdb_wait();
-
-	/*
-	 * If we're in breakpoint() increment the PC
-	 */
-	trap = (regs->cp0_cause & 0x7c) >> 2;
-	if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
-		regs->cp0_epc += 4;
-
-	/*
-	 * If we were single_stepping, restore the opcodes hoisted
-	 * for the breakpoint[s].
-	 */
-	if (step_bp[0].addr) {
-		*(unsigned *)step_bp[0].addr = step_bp[0].val;
-		step_bp[0].addr = 0;
-
-		if (step_bp[1].addr) {
-			*(unsigned *)step_bp[1].addr = step_bp[1].val;
-			step_bp[1].addr = 0;
-		}
-	}
-
-	stack = (long *)regs->reg29;			/* stack ptr */
-	sigval = computeSignal(trap);
-
-	/*
-	 * reply to host that an exception has occurred
-	 */
-	ptr = output_buffer;
-
-	/*
-	 * Send trap type (converted to signal)
-	 */
-	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
-
-	/*
-	 * Send Error PC
-	 */
-	*ptr++ = hexchars[REG_EPC >> 4];
-	*ptr++ = hexchars[REG_EPC & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->cp0_epc, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send frame pointer
-	 */
-	*ptr++ = hexchars[REG_FP >> 4];
-	*ptr++ = hexchars[REG_FP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg30, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send stack pointer
-	 */
-	*ptr++ = hexchars[REG_SP >> 4];
-	*ptr++ = hexchars[REG_SP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg29, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	*ptr++ = 0;
-	putpacket(output_buffer);	/* send it off... */
-
-	/*
-	 * Wait for input from remote GDB
-	 */
-	while (1) {
-		output_buffer[0] = 0;
-		getpacket(input_buffer);
-
-		switch (input_buffer[0])
-		{
-		case '?':
-			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
-			output_buffer[3] = 0;
-			break;
-
-		/*
-		 * Detach debugger; let CPU run
-		 */
-		case 'D':
-			putpacket(output_buffer);
-			goto finish_kgdb;
-			break;
-
-		case 'd':
-			/* toggle debug flag */
-			break;
-
-		/*
-		 * Return the value of the CPU registers
-		 */
-		case 'g':
-			ptr = output_buffer;
-			ptr = mem2hex((char *)&regs->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
-			ptr = mem2hex((char *)&regs->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
-			ptr = mem2hex((char *)&regs->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
-			ptr = mem2hex((char *)&regs->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
-			ptr = mem2hex((char *)&regs->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
-			ptr = mem2hex((char *)&regs->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
-			break;
-
-		/*
-		 * set the value of the CPU registers - return OK
-		 */
-		case 'G':
-		{
-			ptr = &input_buffer[1];
-			hex2mem(ptr, (char *)&regs->reg0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_status, 6*sizeof(long), 0, 0);
-			ptr += 6*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->fpr0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp1_fsr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->frame_ptr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_index, 16*sizeof(long), 0, 0);
-			strcpy(output_buffer, "OK");
-		 }
-		break;
-
-		/*
-		 * mAA..AA,LLLL  Read LLLL bytes at address AA..AA
-		 */
-		case 'm':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)) {
-				if (mem2hex((char *)addr, output_buffer, length, 1))
-					break;
-				strcpy(output_buffer, "E03");
-			} else
-				strcpy(output_buffer, "E01");
-			break;
-
-		/*
-		 * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
-		 */
-		case 'X':
-			bflag = 1;
-			/* fall through */
-
-		/*
-		 * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
-		 */
-		case 'M':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)
-				&& *ptr++ == ':') {
-				if (hex2mem(ptr, (char *)addr, length, bflag, 1))
-					strcpy(output_buffer, "OK");
-				else
-					strcpy(output_buffer, "E03");
-			}
-			else
-				strcpy(output_buffer, "E02");
-			break;
-
-		/*
-		 * cAA..AA    Continue at address AA..AA(optional)
-		 */
-		case 'c':
-			/* try to read optional parameter, pc unchanged if no parm */
-
-			ptr = &input_buffer[1];
-			if (hexToLong(&ptr, &addr))
-				regs->cp0_epc = addr;
-
-			goto exit_kgdb_exception;
-			break;
-
-		/*
-		 * kill the program; let us try to restart the machine
-		 * Reset the whole machine.
-		 */
-		case 'k':
-		case 'r':
-			machine_restart("kgdb restarts machine");
-			break;
-
-		/*
-		 * Step to next instruction
-		 */
-		case 's':
-			/*
-			 * There is no single step insn in the MIPS ISA, so we
-			 * use breakpoints and continue, instead.
-			 */
-			single_step(regs);
-			goto exit_kgdb_exception;
-			/* NOTREACHED */
-			break;
-
-		/*
-		 * Set baud rate (bBB)
-		 * FIXME: Needs to be written
-		 */
-		case 'b':
-		{
-#if 0
-			int baudrate;
-			extern void set_timer_3();
-
-			ptr = &input_buffer[1];
-			if (!hexToInt(&ptr, &baudrate))
-			{
-				strcpy(output_buffer, "B01");
-				break;
-			}
-
-			/* Convert baud rate to uart clock divider */
-
-			switch (baudrate)
-			{
-				case 38400:
-					baudrate = 16;
-					break;
-				case 19200:
-					baudrate = 33;
-					break;
-				case 9600:
-					baudrate = 65;
-					break;
-				default:
-					baudrate = 0;
-					strcpy(output_buffer, "B02");
-					goto x1;
-			}
-
-			if (baudrate) {
-				putpacket("OK");	/* Ack before changing speed */
-				set_timer_3(baudrate); /* Set it */
-			}
-#endif
-		}
-		break;
-
-		}			/* switch */
-
-		/*
-		 * reply to the request
-		 */
-
-		putpacket(output_buffer);
-
-	} /* while */
-
-	return;
-
-finish_kgdb:
-	restore_debug_traps();
-
-exit_kgdb_exception:
-	/* release locks so other CPUs can go */
-	for_each_online_cpu(i)
-		__raw_spin_unlock(&kgdb_cpulock[i]);
-	spin_unlock(&kgdb_lock);
-
-	__flush_cache_all();
-	return;
-}
-
-/*
- * This function will generate a breakpoint exception.  It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void breakpoint(void)
-{
-	if (!initialized)
-		return;
-
-	__asm__ __volatile__(
-			".globl	breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-/* Nothing but the break; don't pollute any registers */
-void async_breakpoint(void)
-{
-	__asm__ __volatile__(
-			".globl	async_breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"async_breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-void adel(void)
-{
-	__asm__ __volatile__(
-			".globl\tadel\n\t"
-			"lui\t$8,0x8000\n\t"
-			"lw\t$9,1($8)\n\t"
-			);
-}
-
-/*
- * malloc is needed by gdb client in "call func()", even a private one
- * will make gdb happy
- */
-static void __used *malloc(size_t size)
-{
-	return kmalloc(size, GFP_ATOMIC);
-}
-
-static void __used free(void *where)
-{
-	kfree(where);
-}
-
-#ifdef CONFIG_GDB_CONSOLE
-
-void gdb_putsn(const char *str, int l)
-{
-	char outbuf[18];
-
-	if (!kgdb_started)
-		return;
-
-	outbuf[0]='O';
-
-	while(l) {
-		int i = (l>8)?8:l;
-		mem2hex((char *)str, &outbuf[1], i, 0);
-		outbuf[(i*2)+1]=0;
-		putpacket(outbuf);
-		str += i;
-		l -= i;
-	}
-}
-
-static void gdb_console_write(struct console *con, const char *s, unsigned n)
-{
-	gdb_putsn(s, n);
-}
-
-static struct console gdb_console = {
-	.name	= "gdb",
-	.write	= gdb_console_write,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1
-};
-
-static int __init register_gdb_console(void)
-{
-	register_console(&gdb_console);
-
-	return 0;
-}
-
-console_initcall(register_gdb_console);
-
-#endif
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index c6ada98ee04..f886dd7f708 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -20,6 +20,7 @@
 #include <asm/stackframe.h>
 #include <asm/war.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 #define PANIC_PIC(msg)					\
 		.set push;				\
@@ -126,7 +127,42 @@ handle_vcei:
 
 	__FINIT
 
+	.align	5	/* 32 byte rollback region */
+LEAF(r4k_wait)
+	.set	push
+	.set	noreorder
+	/* start of rollback region */
+	LONG_L	t0, TI_FLAGS($28)
+	nop
+	andi	t0, _TIF_NEED_RESCHED
+	bnez	t0, 1f
+	 nop
+	nop
+	nop
+	.set	mips3
+	wait
+	/* end of rollback region (the region size must be power of two) */
+	.set	pop
+1:
+	jr	ra
+	END(r4k_wait)
+
+	.macro	BUILD_ROLLBACK_PROLOGUE handler
+	FEXPORT(rollback_\handler)
+	.set	push
+	.set	noat
+	MFC0	k0, CP0_EPC
+	PTR_LA	k1, r4k_wait
+	ori	k0, 0x1f	/* 32 byte rollback region */
+	xori	k0, 0x1f
+	bne	k0, k1, 9f
+	MTC0	k0, CP0_EPC
+9:
+	.set pop
+	.endm
+
 	.align  5
+BUILD_ROLLBACK_PROLOGUE handle_int
 NESTED(handle_int, PT_SIZE, sp)
 #ifdef CONFIG_TRACE_IRQFLAGS
 	/*
@@ -201,6 +237,7 @@ NESTED(except_vec_ejtag_debug, 0, sp)
  * This prototype is copied to ebase + n*IntCtl.VS and patched
  * to invoke the handler
  */
+BUILD_ROLLBACK_PROLOGUE except_vec_vi
 NESTED(except_vec_vi, 0, sp)
 	SAVE_SOME
 	SAVE_AT
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 6045b9a51a3..4b4007b3083 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -21,11 +21,16 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/kallsyms.h>
+#include <linux/kgdb.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
+#ifdef CONFIG_KGDB
+int kgdb_early_setup;
+#endif
+
 static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
 
 int allocate_irqno(void)
@@ -126,33 +131,22 @@ asmlinkage void spurious_interrupt(void)
 	atomic_inc(&irq_err_count);
 }
 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-#endif
-
 void __init init_IRQ(void)
 {
 	int i;
 
+#ifdef CONFIG_KGDB
+	if (kgdb_early_setup)
+		return;
+#endif
+
 	for (i = 0; i < NR_IRQS; i++)
 		set_irq_noprobe(i);
 
 	arch_init_irq();
 
 #ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		printk("Wait for gdb client connection ...\n");
-		set_debug_traps();
-		breakpoint();
-	}
+	if (!kgdb_early_setup)
+		kgdb_early_setup = 1;
 #endif
 }
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
new file mode 100644
index 00000000000..8f6d58ede33
--- /dev/null
+++ b/arch/mips/kernel/kgdb.c
@@ -0,0 +1,278 @@
+/*
+ *  Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ *  Contributed by HP Systems
+ *
+ *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ *  Copyright (C) 1995 Andreas Busse
+ *
+ *  Copyright (C) 2003 MontaVista Software Inc.
+ *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  Copyright (C) 2004-2005 MontaVista Software Inc.
+ *  Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com
+ *
+ *  Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *  Author/Maintainer: Jason Wessel, jason.wessel@windriver.com
+ *
+ *  This file is licensed under the terms of the GNU General Public License
+ *  version 2. This program is licensed "as is" without any warranty of any
+ *  kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>		/* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <asm/inst.h>
+#include <asm/fpu.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+
+static struct hard_trap_info {
+	unsigned char tt;	/* Trap type code for MIPS R3xxx and R4xxx */
+	unsigned char signo;	/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 6, SIGBUS },		/* instruction bus error */
+	{ 7, SIGBUS },		/* data bus error */
+	{ 9, SIGTRAP },		/* break */
+/*	{ 11, SIGILL },	*/	/* CPU unusable */
+	{ 12, SIGFPE },		/* overflow */
+	{ 13, SIGTRAP },	/* trap */
+	{ 14, SIGSEGV },	/* virtual instruction cache coherency */
+	{ 15, SIGFPE },		/* floating point exception */
+	{ 23, SIGSEGV },	/* watch */
+	{ 31, SIGSEGV },	/* virtual data cache coherency */
+	{ 0, 0}			/* Must be last */
+};
+
+void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__(
+		".globl breakinst\n\t"
+		".set\tnoreorder\n\t"
+		"nop\n"
+		"breakinst:\tbreak\n\t"
+		"nop\n\t"
+		".set\treorder");
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), NULL);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	local_irq_enable();
+	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
+	local_irq_disable();
+}
+
+static int compute_signal(int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+
+	/* FP REGS */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	save_fp(current);
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = current->thread.fpu.fpr[reg];
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	const u32 *ptr = (u32 *)gdb_regs;
+#else
+	const u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		regs->regs[reg] = *(ptr++);
+
+	regs->cp0_status = *(ptr++);
+	regs->lo = *(ptr++);
+	regs->hi = *(ptr++);
+	regs->cp0_badvaddr = *(ptr++);
+	regs->cp0_cause = *(ptr++);
+	regs->cp0_epc = *(ptr++);
+
+	/* FP REGS from current */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	for (reg = 0; reg < 32; reg++)
+		current->thread.fpu.fpr[reg] = *(ptr++);
+	restore_fp(current);
+}
+
+/*
+ * Similar to regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	int reg;
+	struct thread_info *ti = task_thread_info(p);
+	unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+	struct pt_regs *regs = (struct pt_regs *)ksp - 1;
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 16; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	/* S0 - S7 */
+	for (reg = 16; reg < 24; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	for (reg = 24; reg < 28; reg++)
+		*(ptr++) = 0;
+
+	/* GP, SP, FP, RA */
+	for (reg = 28; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger
+ */
+static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
+			    void *ptr)
+{
+	struct die_args *args = (struct die_args *)ptr;
+	struct pt_regs *regs = args->regs;
+	int trap = (regs->cp0_cause & 0x7c) >> 2;
+
+	/* Userpace events, ignore. */
+	if (user_mode(regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_active) != -1)
+		kgdb_nmicallback(smp_processor_id(), regs);
+
+	if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_setting_breakpoint))
+		if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst))
+			regs->cp0_epc += 4;
+
+	/* In SMP mode, __flush_cache_all does IPI */
+	local_irq_enable();
+	__flush_cache_all();
+
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call = kgdb_mips_notify,
+};
+
+/*
+ * Handle the 's' and 'c' commands
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long address;
+	int cpu = smp_processor_id();
+
+	switch (remcom_in_buffer[0]) {
+	case 's':
+	case 'c':
+		/* handle the optional parameter */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &address))
+			regs->cp0_epc = address;
+
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		if (remcom_in_buffer[0] == 's')
+			if (kgdb_contthread)
+				atomic_set(&kgdb_cpu_doing_single_step, cpu);
+
+		return 0;
+	}
+
+	return -1;
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * We use kgdb_early_setup so that functions we need to call now don't
+ * cause trouble when called again later.
+ */
+int kgdb_arch_init(void)
+{
+	union mips_instruction insn = {
+		.r_format = {
+			.opcode = spec_op,
+			.func   = break_op,
+		}
+	};
+	memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
+
+	register_die_notifier(&kgdb_notifier);
+
+	return 0;
+}
+
+/*
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index b16facd9ea8..ce7684335a4 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -148,6 +148,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
 #ifdef CONFIG_MIPS_MT_FPAFF
+	clear_tsk_thread_flag(p, TIF_FPUBOUND);
+
 	/*
 	 * FPU affinity support is cleaner if we track the
 	 * user-visible CPU affinity from the very beginning.
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index fc4fd4d705e..5e75a316f6b 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -647,6 +647,12 @@ einval:	li	v0, -EINVAL
 	sys	sys_timerfd_create	2
 	sys	sys_timerfd_gettime	2
 	sys	sys_timerfd_settime	4
+	sys	sys_signalfd4		4
+	sys	sys_eventfd2		2	/* 4325 */
+	sys	sys_epoll_create1	1
+	sys	sys_dup3		3
+	sys	sys_pipe2		2
+	sys	sys_inotify_init1	1
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 2b73fd1e452..3d58204c9d4 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -481,4 +481,10 @@ sys_call_table:
 	PTR	sys_timerfd_create		/* 5280 */
 	PTR	sys_timerfd_gettime
 	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2
+	PTR	sys_epoll_create1		/* 5285 */
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 2654e75d2fe..da7f1b6ea0f 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -407,4 +407,10 @@ EXPORT(sysn32_call_table)
 	PTR	sys_timerfd_create
 	PTR	sys_timerfd_gettime		/* 5285 */
 	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2
+	PTR	sys_epoll_create1
+	PTR	sys_dup3			/* 5290 */
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 76167bea5a7..d7cd1aac9ad 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -529,4 +529,10 @@ sys_call_table:
 	PTR	sys_timerfd_create
 	PTR	sys_timerfd_gettime
 	PTR	sys_timerfd_settime
+	PTR	compat_sys_signalfd4
+	PTR	sys_eventfd2			/* 4325 */
+	PTR	sys_epoll_create1
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 8af84867e74..16f8edfe5cd 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -78,7 +78,7 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 
 	/* Sanity check */
 	if (start + size < start) {
-		printk("Trying to add an invalid memory region, skipped\n");
+		pr_warning("Trying to add an invalid memory region, skipped\n");
 		return;
 	}
 
@@ -92,7 +92,7 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 	}
 
 	if (x == BOOT_MEM_MAP_MAX) {
-		printk("Ooops! Too many entries in the memory map!\n");
+		pr_err("Ooops! Too many entries in the memory map!\n");
 		return;
 	}
 
@@ -108,22 +108,22 @@ static void __init print_memory_map(void)
 	const int field = 2 * sizeof(unsigned long);
 
 	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		printk(" memory: %0*Lx @ %0*Lx ",
+		printk(KERN_INFO " memory: %0*Lx @ %0*Lx ",
 		       field, (unsigned long long) boot_mem_map.map[i].size,
 		       field, (unsigned long long) boot_mem_map.map[i].addr);
 
 		switch (boot_mem_map.map[i].type) {
 		case BOOT_MEM_RAM:
-			printk("(usable)\n");
+			printk(KERN_CONT "(usable)\n");
 			break;
 		case BOOT_MEM_ROM_DATA:
-			printk("(ROM data)\n");
+			printk(KERN_CONT "(ROM data)\n");
 			break;
 		case BOOT_MEM_RESERVED:
-			printk("(reserved)\n");
+			printk(KERN_CONT "(reserved)\n");
 			break;
 		default:
-			printk("type %lu\n", boot_mem_map.map[i].type);
+			printk(KERN_CONT "type %lu\n", boot_mem_map.map[i].type);
 			break;
 		}
 	}
@@ -160,36 +160,39 @@ early_param("rd_size", rd_size_early);
 static unsigned long __init init_initrd(void)
 {
 	unsigned long end;
-	u32 *initrd_header;
 
 	/*
 	 * Board specific code or command line parser should have
 	 * already set up initrd_start and initrd_end. In these cases
 	 * perfom sanity checks and use them if all looks good.
 	 */
-	if (initrd_start && initrd_end > initrd_start)
-		goto sanitize;
+	if (!initrd_start || initrd_end <= initrd_start) {
+#ifdef CONFIG_PROBE_INITRD_HEADER
+		u32 *initrd_header;
 
-	/*
-	 * See if initrd has been added to the kernel image by
-	 * arch/mips/boot/addinitrd.c. In that case a header is
-	 * prepended to initrd and is made up by 8 bytes. The fisrt
-	 * word is a magic number and the second one is the size of
-	 * initrd.  Initrd start must be page aligned in any cases.
-	 */
-	initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
-	if (initrd_header[0] != 0x494E5244)
+		/*
+		 * See if initrd has been added to the kernel image by
+		 * arch/mips/boot/addinitrd.c. In that case a header is
+		 * prepended to initrd and is made up by 8 bytes. The first
+		 * word is a magic number and the second one is the size of
+		 * initrd.  Initrd start must be page aligned in any cases.
+		 */
+		initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
+		if (initrd_header[0] != 0x494E5244)
+			goto disable;
+		initrd_start = (unsigned long)(initrd_header + 2);
+		initrd_end = initrd_start + initrd_header[1];
+#else
 		goto disable;
-	initrd_start = (unsigned long)(initrd_header + 2);
-	initrd_end = initrd_start + initrd_header[1];
+#endif
+	}
 
-sanitize:
 	if (initrd_start & ~PAGE_MASK) {
-		printk(KERN_ERR "initrd start must be page aligned\n");
+		pr_err("initrd start must be page aligned\n");
 		goto disable;
 	}
 	if (initrd_start < PAGE_OFFSET) {
-		printk(KERN_ERR "initrd start < PAGE_OFFSET\n");
+		pr_err("initrd start < PAGE_OFFSET\n");
 		goto disable;
 	}
 
@@ -221,18 +224,18 @@ static void __init finalize_initrd(void)
 		goto disable;
 	}
 	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
-		printk("Initrd extends beyond end of memory");
+		printk(KERN_ERR "Initrd extends beyond end of memory");
 		goto disable;
 	}
 
 	reserve_bootmem(__pa(initrd_start), size, BOOTMEM_DEFAULT);
 	initrd_below_start_ok = 1;
 
-	printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n",
-	       initrd_start, size);
+	pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n",
+		initrd_start, size);
 	return;
 disable:
-	printk(" - disabling initrd\n");
+	printk(KERN_CONT " - disabling initrd\n");
 	initrd_start = 0;
 	initrd_end = 0;
 }
@@ -310,14 +313,12 @@ static void __init bootmem_init(void)
 	if (min_low_pfn >= max_low_pfn)
 		panic("Incorrect memory mapping !!!");
 	if (min_low_pfn > ARCH_PFN_OFFSET) {
-		printk(KERN_INFO
-		       "Wasting %lu bytes for tracking %lu unused pages\n",
-		       (min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
-		       min_low_pfn - ARCH_PFN_OFFSET);
+		pr_info("Wasting %lu bytes for tracking %lu unused pages\n",
+			(min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
+			min_low_pfn - ARCH_PFN_OFFSET);
 	} else if (min_low_pfn < ARCH_PFN_OFFSET) {
-		printk(KERN_INFO
-		       "%lu free pages won't be used\n",
-		       ARCH_PFN_OFFSET - min_low_pfn);
+		pr_info("%lu free pages won't be used\n",
+			ARCH_PFN_OFFSET - min_low_pfn);
 	}
 	min_low_pfn = ARCH_PFN_OFFSET;
 
@@ -471,7 +472,7 @@ static void __init arch_mem_init(char **cmdline_p)
 	/* call board setup routine */
 	plat_mem_setup();
 
-	printk("Determined physical RAM map:\n");
+	pr_info("Determined physical RAM map:\n");
 	print_memory_map();
 
 	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
@@ -482,7 +483,7 @@ static void __init arch_mem_init(char **cmdline_p)
 	parse_early_param();
 
 	if (usermem) {
-		printk("User-defined physical RAM map:\n");
+		pr_info("User-defined physical RAM map:\n");
 		print_memory_map();
 	}
 
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b8ea4e9d0d8..5fd0cd020af 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -23,6 +23,8 @@
 #include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -44,6 +46,9 @@
 #include <asm/types.h>
 #include <asm/stacktrace.h>
 
+extern void check_wait(void);
+extern asmlinkage void r4k_wait(void);
+extern asmlinkage void rollback_handle_int(void);
 extern asmlinkage void handle_int(void);
 extern asmlinkage void handle_tlbm(void);
 extern asmlinkage void handle_tlbl(void);
@@ -371,8 +376,8 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 	do_exit(SIGSEGV);
 }
 
-extern const struct exception_table_entry __start___dbe_table[];
-extern const struct exception_table_entry __stop___dbe_table[];
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
 
 __asm__(
 "	.section	__dbe_table, \"a\"\n"
@@ -425,6 +430,10 @@ asmlinkage void do_be(struct pt_regs *regs)
 	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
 	       data ? "Data" : "Instruction",
 	       field, regs->cp0_epc, field, regs->regs[31]);
+	if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Oops", regs);
 	force_sig(SIGBUS, current);
 }
@@ -623,6 +632,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
 	siginfo_t info;
 
+	if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+	    == NOTIFY_STOP)
+		return;
 	die_if_kernel("FP exception in kernel code", regs);
 
 	if (fcr31 & FPU_CSR_UNI_X) {
@@ -682,6 +694,9 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	siginfo_t info;
 	char b[40];
 
+	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+
 	/*
 	 * A short test says that IRIX 5.3 sends SIGTRAP for all trap
 	 * insns, even for trap and break codes that indicate arithmetic
@@ -762,6 +777,10 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	unsigned int opcode = 0;
 	int status = -1;
 
+	if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Reserved instruction in kernel code", regs);
 
 	if (unlikely(compute_return_epc(regs) < 0))
@@ -1184,7 +1203,7 @@ void *set_except_vector(int n, void *addr)
 	if (n == 0 && cpu_has_divec) {
 		*(u32 *)(ebase + 0x200) = 0x08000000 |
 					  (0x03ffffff & (handler >> 2));
-		flush_icache_range(ebase + 0x200, ebase + 0x204);
+		local_flush_icache_range(ebase + 0x200, ebase + 0x204);
 	}
 	return (void *)old_handler;
 }
@@ -1235,6 +1254,9 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 
 		extern char except_vec_vi, except_vec_vi_lui;
 		extern char except_vec_vi_ori, except_vec_vi_end;
+		extern char rollback_except_vec_vi;
+		char *vec_start = (cpu_wait == r4k_wait) ?
+			&rollback_except_vec_vi : &except_vec_vi;
 #ifdef CONFIG_MIPS_MT_SMTC
 		/*
 		 * We need to provide the SMTC vectored interrupt handler
@@ -1242,11 +1264,11 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		 * Status.IM bit to be masked before going there.
 		 */
 		extern char except_vec_vi_mori;
-		const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+		const int mori_offset = &except_vec_vi_mori - vec_start;
 #endif /* CONFIG_MIPS_MT_SMTC */
-		const int handler_len = &except_vec_vi_end - &except_vec_vi;
-		const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
-		const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+		const int handler_len = &except_vec_vi_end - vec_start;
+		const int lui_offset = &except_vec_vi_lui - vec_start;
+		const int ori_offset = &except_vec_vi_ori - vec_start;
 
 		if (handler_len > VECTORSPACING) {
 			/*
@@ -1256,7 +1278,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 			panic("VECTORSPACING too small");
 		}
 
-		memcpy(b, &except_vec_vi, handler_len);
+		memcpy(b, vec_start, handler_len);
 #ifdef CONFIG_MIPS_MT_SMTC
 		BUG_ON(n > 7);	/* Vector index %d exceeds SMTC maximum. */
 
@@ -1267,7 +1289,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
 		w = (u32 *)(b + ori_offset);
 		*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
-		flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+handler_len));
 	}
 	else {
 		/*
@@ -1279,7 +1302,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		w = (u32 *)b;
 		*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
 		*w = 0;
-		flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+8));
 	}
 
 	return (void *)old_handler;
@@ -1499,7 +1523,7 @@ void __cpuinit per_cpu_trap_init(void)
 void __init set_handler(unsigned long offset, void *addr, unsigned long size)
 {
 	memcpy((void *)(ebase + offset), addr, size);
-	flush_icache_range(ebase + offset, ebase + offset + size);
+	local_flush_icache_range(ebase + offset, ebase + offset + size);
 }
 
 static char panic_null_cerr[] __cpuinitdata =
@@ -1536,6 +1560,15 @@ void __init trap_init(void)
 	extern char except_vec3_generic, except_vec3_r4000;
 	extern char except_vec4;
 	unsigned long i;
+	int rollback;
+
+	check_wait();
+	rollback = (cpu_wait == r4k_wait);
+
+#if defined(CONFIG_KGDB)
+	if (kgdb_early_setup)
+		return;	/* Already done */
+#endif
 
 	if (cpu_has_veic || cpu_has_vint)
 		ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
@@ -1595,7 +1628,7 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();
 
-	set_except_vector(0, handle_int);
+	set_except_vector(0, rollback ? rollback_handle_int : handle_int);
 	set_except_vector(1, handle_tlbm);
 	set_except_vector(2, handle_tlbl);
 	set_except_vector(3, handle_tlbs);
@@ -1659,6 +1692,8 @@ void __init trap_init(void)
 	signal32_init();
 #endif
 
-	flush_icache_range(ebase, ebase + 0x400);
+	local_flush_icache_range(ebase, ebase + 0x400);
 	flush_tlb_handlers();
+
+	sort_extable(__start___dbe_table, __stop___dbe_table);
 }
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index b5470ceb418..afb119f3568 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -36,6 +36,7 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		*(.text.*)
 		*(.fixup)
 		*(.gnu.warning)
 	} :text = 0
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index 8d7784122c1..edac9892c51 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -39,12 +39,14 @@
 #ifdef USE_DOUBLE
 
 #define LOAD   ld
+#define LOAD32 lwu
 #define ADD    daddu
 #define NBYTES 8
 
 #else
 
 #define LOAD   lw
+#define LOAD32 lw
 #define ADD    addu
 #define NBYTES 4
 
@@ -60,6 +62,14 @@
 	ADD	sum, v1;					\
 	.set	pop
 
+#define ADDC32(sum,reg)						\
+	.set	push;						\
+	.set	noat;						\
+	addu	sum, reg;					\
+	sltu	v1, sum, reg;					\
+	addu	sum, v1;					\
+	.set	pop
+
 #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3)	\
 	LOAD	_t0, (offset + UNIT(0))(src);			\
 	LOAD	_t1, (offset + UNIT(1))(src);			\
@@ -132,7 +142,7 @@ LEAF(csum_partial)
 	beqz	t8, .Lqword_align
 	 andi	t8, src, 0x8
 
-	lw	t0, 0x00(src)
+	LOAD32	t0, 0x00(src)
 	LONG_SUBU	a1, a1, 0x4
 	ADDC(sum, t0)
 	PTR_ADDU	src, src, 0x4
@@ -211,7 +221,7 @@ LEAF(csum_partial)
 	LONG_SRL	t8, t8, 0x2
 
 .Lend_words:
-	lw	t0, (src)
+	LOAD32	t0, (src)
 	LONG_SUBU	t8, t8, 0x1
 	ADDC(sum, t0)
 	.set	reorder				/* DADDI_WAR */
@@ -230,6 +240,9 @@ LEAF(csum_partial)
 	/* Still a full word to go  */
 	ulw	t1, (src)
 	PTR_ADDIU	src, 4
+#ifdef USE_DOUBLE
+	dsll	t1, t1, 32			/* clear lower 32bit */
+#endif
 	ADDC(sum, t1)
 
 1:	move	t1, zero
@@ -280,7 +293,7 @@ LEAF(csum_partial)
 1:
 	.set	reorder
 	/* Add the passed partial csum.  */
-	ADDC(sum, a2)
+	ADDC32(sum, a2)
 	jr	ra
 	.set	noreorder
 	END(csum_partial)
@@ -681,7 +694,7 @@ EXC(	sb	t0, NBYTES-2(dst), .Ls_exc)
 	.set	pop
 1:
 	.set reorder
-	ADDC(sum, psum)
+	ADDC32(sum, psum)
 	jr	ra
 	.set noreorder
 
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 27a5b466c85..5500c20c79a 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -320,6 +320,7 @@ void __cpuinit r3k_cache_init(void)
 	flush_cache_range = r3k_flush_cache_range;
 	flush_cache_page = r3k_flush_cache_page;
 	flush_icache_range = r3k_flush_icache_range;
+	local_flush_icache_range = r3k_flush_icache_range;
 
 	flush_cache_sigtramp = r3k_flush_cache_sigtramp;
 	local_flush_data_cache_page = local_r3k_flush_data_cache_page;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 71df3390c07..6e99665ae86 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -543,12 +543,8 @@ struct flush_icache_range_args {
 	unsigned long end;
 };
 
-static inline void local_r4k_flush_icache_range(void *args)
+static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end)
 {
-	struct flush_icache_range_args *fir_args = args;
-	unsigned long start = fir_args->start;
-	unsigned long end = fir_args->end;
-
 	if (!cpu_has_ic_fills_f_dc) {
 		if (end - start >= dcache_size) {
 			r4k_blast_dcache();
@@ -564,6 +560,15 @@ static inline void local_r4k_flush_icache_range(void *args)
 		protected_blast_icache_range(start, end);
 }
 
+static inline void local_r4k_flush_icache_range_ipi(void *args)
+{
+	struct flush_icache_range_args *fir_args = args;
+	unsigned long start = fir_args->start;
+	unsigned long end = fir_args->end;
+
+	local_r4k_flush_icache_range(start, end);
+}
+
 static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 {
 	struct flush_icache_range_args args;
@@ -571,7 +576,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.start = start;
 	args.end = end;
 
-	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args, 1);
 	instruction_hazard();
 }
 
@@ -1375,6 +1380,7 @@ void __cpuinit r4k_cache_init(void)
 	local_flush_data_cache_page	= local_r4k_flush_data_cache_page;
 	flush_data_cache_page	= r4k_flush_data_cache_page;
 	flush_icache_range	= r4k_flush_icache_range;
+	local_flush_icache_range	= local_r4k_flush_icache_range;
 
 #if defined(CONFIG_DMA_NONCOHERENT)
 	if (coherentio) {
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index a9f7f1f5e9b..f7c8f9ce39c 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -362,6 +362,7 @@ void __cpuinit tx39_cache_init(void)
 		flush_cache_range	= (void *) tx39h_flush_icache_all;
 		flush_cache_page	= (void *) tx39h_flush_icache_all;
 		flush_icache_range	= (void *) tx39h_flush_icache_all;
+		local_flush_icache_range = (void *) tx39h_flush_icache_all;
 
 		flush_cache_sigtramp	= (void *) tx39h_flush_icache_all;
 		local_flush_data_cache_page	= (void *) tx39h_flush_icache_all;
@@ -390,6 +391,7 @@ void __cpuinit tx39_cache_init(void)
 		flush_cache_range = tx39_flush_cache_range;
 		flush_cache_page = tx39_flush_cache_page;
 		flush_icache_range = tx39_flush_icache_range;
+		local_flush_icache_range = tx39_flush_icache_range;
 
 		flush_cache_sigtramp = tx39_flush_cache_sigtramp;
 		local_flush_data_cache_page = local_tx39_flush_data_cache_page;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 034e8506f6e..1eb7c71e3d6 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -29,6 +29,7 @@ void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
 void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
 	unsigned long pfn);
 void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*local_flush_icache_range)(unsigned long start, unsigned long end);
 
 void (*__flush_cache_vmap)(void);
 void (*__flush_cache_vunmap)(void);
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index a782549ac80..f0cf46adb97 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -246,10 +246,6 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 		old_pagemask = read_c0_pagemask();
 		w = read_c0_wired();
 		write_c0_wired(w + 1);
-		if (read_c0_wired() != w + 1) {
-			printk("[tlbwired] No WIRED reg?\n");
-			return;
-		}
 		write_c0_index(w << 8);
 		write_c0_pagemask(pagemask);
 		write_c0_entryhi(entryhi);
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 76da73a5ab3..979cf919728 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1273,10 +1273,10 @@ void __cpuinit build_tlb_refill_handler(void)
 
 void __cpuinit flush_tlb_handlers(void)
 {
-	flush_icache_range((unsigned long)handle_tlbl,
+	local_flush_icache_range((unsigned long)handle_tlbl,
 			   (unsigned long)handle_tlbl + sizeof(handle_tlbl));
-	flush_icache_range((unsigned long)handle_tlbs,
+	local_flush_icache_range((unsigned long)handle_tlbs,
 			   (unsigned long)handle_tlbs + sizeof(handle_tlbs));
-	flush_icache_range((unsigned long)handle_tlbm,
+	local_flush_icache_range((unsigned long)handle_tlbm,
 			   (unsigned long)handle_tlbm + sizeof(handle_tlbm));
 }
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index f8064446e81..3b7dd722c32 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -13,7 +13,6 @@ obj-y				:= malta-amon.o malta-cmdline.o \
 
 obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
 obj-$(CONFIG_PCI)		+= malta-pci.o
-obj-$(CONFIG_KGDB)		+= malta-kgdb.o
 
 # FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index c0653021a17..4832af25166 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -37,15 +37,6 @@
 
 #include <asm/mips-boards/malta.h>
 
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
 int prom_argc;
 int *_prom_argv, *_prom_envp;
 
@@ -173,51 +164,6 @@ static void __init console_config(void)
 }
 #endif
 
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
-	extern int (*generic_putDebugChar)(char);
-	extern char (*generic_getDebugChar)(void);
-	char *argptr;
-	int line, speed;
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		argptr += strlen("kgdb=ttyS");
-		if (*argptr != '0' && *argptr != '1')
-			printk("KGDB: Unknown serial line /dev/ttyS%c, "
-			       "falling back to /dev/ttyS1\n", *argptr);
-		line = *argptr == '0' ? 0 : 1;
-		printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
-		speed = 0;
-		if (*++argptr == ',')
-		{
-			int c;
-			while ((c = *++argptr) && ('0' <= c && c <= '9'))
-				speed = speed * 10 + c - '0';
-		}
-		{
-			speed = rs_kgdb_hook(line, speed);
-			generic_putDebugChar = rs_putDebugChar;
-			generic_getDebugChar = rs_getDebugChar;
-		}
-
-		pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
-		        "session, please connect your debugger\n",
-		        line ? 1 : 0, speed);
-
-		{
-			char *s;
-			for (s = "Please connect GDB to this port\r\n"; *s; )
-				generic_putDebugChar(*s++);
-		}
-
-		/* Breakpoint is invoked after interrupts are initialised */
-	}
-}
-#endif
-
 static void __init mips_nmi_setup(void)
 {
 	void *base;
diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c
deleted file mode 100644
index 6a1854de457..00000000000
--- a/arch/mips/mti-malta/malta-kgdb.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
-	SERIAL_PORT_DFNS	/* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
-	return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
-				int value)
-{
-	outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
-	int t;
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port = ser->port;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	serial_in(&kdb_port_info, UART_LSR);
-	serial_in(&kdb_port_info, UART_RX);
-	serial_in(&kdb_port_info, UART_IIR);
-	serial_in(&kdb_port_info, UART_MSR);
-
-	/*
-	 * Now, initialize the UART
-	 */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);	/* reset DLAB */
-	if (kdb_port_info.flags & ASYNC_FOURPORT) {
-		kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
-		t = UART_MCR_DTR | UART_MCR_OUT1;
-	} else {
-		kdb_port_info.MCR
-			= UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-		t = UART_MCR_DTR | UART_MCR_RTS;
-	}
-
-	kdb_port_info.MCR = t;		/* no interrupts, please */
-	serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	if (speed == 0)
-		speed = 9600;
-
-	t = kdb_port_info.state->baud_base / speed;
-	/* set DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
-	serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
-	serial_out(&kdb_port_info, UART_DLM, t >> 8);  /* MS of divisor */
-	/* reset DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
-	return speed;
-}
-
-int putDebugChar(char c)
-{
-	return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
-	return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(&kdb_port_info, UART_TX, c);
-
-	return 1;
-}
-
-char rs_getDebugChar(void)
-{
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
-		;
-
-	return serial_in(&kdb_port_info, UART_RX);
-}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index e7cad54936c..dc78b8983ee 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -199,10 +199,6 @@ void __init plat_mem_setup(void)
 	 */
 	enable_dma(4);
 
-#ifdef CONFIG_KGDB
-	kgdb_config();
-#endif
-
 #ifdef CONFIG_DMA_COHERENT
 	if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
 		panic("Hardware DMA cache coherency not supported");
diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile
index 31cc1a5cec3..dd9e7b1f7fd 100644
--- a/arch/mips/nxp/pnx8550/common/Makefile
+++ b/arch/mips/nxp/pnx8550/common/Makefile
@@ -24,6 +24,5 @@
 
 obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += gdb_hook.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c
deleted file mode 100644
index ad4624f6d9b..00000000000
--- a/arch/mips/nxp/pnx8550/common/gdb_hook.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_ip3106.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#include <uart.h>
-
-static struct serial_state rs_table[IP3106_NR_PORTS] = {
-};
-static struct async_struct kdb_port_info = {0};
-
-void rs_kgdb_hook(int tty_no)
-{
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port  = tty_no;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-
-	/*
-	 * Now, initialize the UART
-	 */
-	ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
-	ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
-}
-
-int putDebugChar(char c)
-{
-	/* Wait until FIFO not full */
-	while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
-		;
-	/* Send one char */
-	ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	char ch;
-
-	/* Wait until there is a char in the FIFO */
-	while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
-					IP3106_UART_FIFO_RXFIFO) >> 8))
-		;
-	/* Read one char */
-	ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
-		IP3106_UART_FIFO_RBRTHR;
-	/* Advance the RX FIFO read pointer */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
-	return (ch);
-}
-
-void rs_disable_debug_interrupts(void)
-{
-	ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
-}
-
-void rs_enable_debug_interrupts(void)
-{
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-	ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
-}
diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c
index aad03429a5e..f080f114a1b 100644
--- a/arch/mips/nxp/pnx8550/common/int.c
+++ b/arch/mips/nxp/pnx8550/common/int.c
@@ -34,7 +34,6 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c
index 18b125e3b65..acf1fa88944 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/nxp/pnx8550/common/proc.c
@@ -22,7 +22,6 @@
 #include <linux/random.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 92d764c9770..2aed50fef10 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
 extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern void rs_kgdb_hook(int tty_no);
 extern char *prom_getcmdline(void);
 
 struct resource standard_io_resources[] = {
@@ -142,16 +141,5 @@ void __init plat_mem_setup(void)
 		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
 	}
 
-#ifdef CONFIG_KGDB
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		int line;
-		argptr += strlen("kgdb=ttyS");
-		line = *argptr == '0' ? 0 : 1;
-		rs_kgdb_hook(line);
-		pr_info("KGDB: Using ttyS%i for session, "
-		        "please connect your debugger\n", line ? 1 : 0);
-	}
-#endif
 	return;
 }
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 8a17a39e5bf..31c15019659 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -37,45 +37,48 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx3927.h>
 
-static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
-	unsigned char where)
+static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where)
 {
-	if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) |
-	                      ((dev_fn & 0xff) << 0x08) |
-	                      (where & 0xfc);
+	if (bus->parent == NULL &&
+	    devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
+		return -1;
+	tx3927_pcicptr->ica =
+		((bus->number & 0xff) << 0x10) |
+		((devfn & 0xff) << 0x08) |
+		(where & 0xfc) | (bus->parent ? 1 : 0);
 
 	/* clear M_ABORT and Disable M_ABORT Int. */
 	tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 	tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT;
-
-	return PCIBIOS_SUCCESSFUL;
+	return 0;
 }
 
 static inline int check_abort(void)
 {
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
+	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) {
 		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
+		/* flush write buffer */
+		iob();
 		return PCIBIOS_DEVICE_NOT_FOUND;
-
+	}
 	return PCIBIOS_SUCCESSFUL;
 }
 
 static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where)) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
 
 	switch (size) {
 	case 1:
@@ -97,11 +100,8 @@ static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	switch (size) {
 	case 1:
@@ -117,11 +117,6 @@ static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		tx3927_pcicptr->icd = cpu_to_le32(val);
 	}
 
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
-		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
-		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
 	return check_abort();
 }
 
@@ -202,3 +197,34 @@ void __init tx3927_pcic_setup(struct pci_controller *channel,
 		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
 	local_irq_restore(flags);
 }
+
+static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n",
+		       regs->cp0_epc);
+		printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
+		       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL;
+		tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL;
+		tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL;
+		tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	panic("PCI error.");
+}
+
+void __init tx3927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI,
+			tx3927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX3927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index c6b49bccd27..5989e747527 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -16,6 +16,8 @@
  * option) any later version.
  */
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx4927pcic.h>
 
 static struct {
@@ -85,6 +87,8 @@ static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr)
 		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
 			     | (PCI_STATUS_REC_MASTER_ABORT << 16),
 			     &pcicptr->pcistatus);
+		/* flush write buffer */
+		iob();
 		code = PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return code;
@@ -192,6 +196,28 @@ static struct {
 	.gbwc = 0xfe0,	/* 4064 GBUSCLK for CCFG.GTOT=0b11 */
 };
 
+char *__devinit tx4927_pcibios_setup(char *str)
+{
+	unsigned long val;
+
+	if (!strncmp(str, "trdyto=", 7)) {
+		if (strict_strtoul(str + 7, 0, &val) == 0)
+			tx4927_pci_opts.trdyto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "retryto=", 8)) {
+		if (strict_strtoul(str + 8, 0, &val) == 0)
+			tx4927_pci_opts.retryto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "gbwc=", 5)) {
+		if (strict_strtoul(str + 5, 0, &val) == 0)
+			tx4927_pci_opts.gbwc = val;
+		return NULL;
+	}
+	return str;
+}
+
 void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
 			      struct pci_controller *channel, int extarb)
 {
@@ -406,3 +432,95 @@ void tx4927_report_pcic_status(void)
 			tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
 	}
 }
+
+static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	int i;
+	__u32 __iomem *preg = (__u32 __iomem *)pcicptr;
+
+	printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr);
+	for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) {
+		if (i % 32 == 0) {
+			printk(KERN_CONT "\n");
+			printk(KERN_INFO "%04x:", i);
+		}
+		/* skip registers with side-effects */
+		if (i == offsetof(struct tx4927_pcic_reg, g2pintack)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pspc)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) {
+			printk(KERN_CONT " XXXXXXXX");
+			continue;
+		}
+		printk(KERN_CONT " %08x", __raw_readl(preg));
+	}
+	printk(KERN_CONT "\n");
+}
+
+void tx4927_dump_pcic_settings(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].pcicptr)
+			tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr);
+	}
+}
+
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	struct tx4927_pcic_reg __iomem *pcicptr =
+		(struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id;
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n",
+		       (int)(2 * sizeof(unsigned long)), regs->cp0_epc);
+		tx4927_report_pcic_status1(pcicptr);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+			     | (TX4927_PCIC_PCISTATUS_ALL << 16),
+			     &pcicptr->pcistatus);
+		__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+		__raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus);
+		__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	tx4927_dump_pcic_settings1(pcicptr);
+	panic("PCI error.");
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
+
+	if (!pcicptr)
+		return;
+	if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) {
+		/* Reset Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+		/*
+		 * swap reqBP and reqXP (raise priority of SLC90E66).
+		 * SLC90E66(PCI-ISA bridge) is connected to REQ2 on
+		 * PCI Backplane board.
+		 */
+		__raw_writel(0x72543610, &pcicptr->pbareqport);
+		__raw_writel(0, &pcicptr->pbabm);
+		/* Use Fixed ParkMaster (required by SLC90E66) */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg);
+		/* Enable Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA |
+			     TX4927_PCIC_PBACFG_PBAEN,
+			     &pcicptr->pbacfg);
+		printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
+		       __raw_readl(&pcicptr->pbareqport));
+	}
+}
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+	tx4927_quirk_slc90e66_bridge);
+#endif
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index ce92f82b16d..bd78368c82b 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -205,6 +205,7 @@ int pcibus_to_node(struct pci_bus *bus)
 
 	return bc->nasid;
 }
+EXPORT_SYMBOL(pcibus_to_node);
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
 	pci_fixup_ioc3);
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
index 27e86a09dd4..aaa90059679 100644
--- a/arch/mips/pci/pci-tx4927.c
+++ b/arch/mips/pci/pci-tx4927.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
@@ -81,3 +82,12 @@ int __init tx4927_pciclk66_setup(void)
 		pciclk = -1;
 	return pciclk;
 }
+
+void __init tx4927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index e5375511c2b..60e2c52c2c5 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
@@ -132,3 +133,12 @@ int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
 	}
 	return -1;
 }
+
+void __init tx4938_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 77bd5b68dc4..c7fe6ec621e 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -328,7 +328,11 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO);
 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
 #endif
 
-char *pcibios_setup(char *str)
+char * (*pcibios_plat_setup)(char *str) __devinitdata;
+
+char *__devinit pcibios_setup(char *str)
 {
+	if (pcibios_plat_setup)
+		return pcibios_plat_setup(str);
 	return str;
 }
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index 9de34302e5f..f7261628d8a 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -38,68 +38,6 @@
 #include <msp_int.h>
 #include <msp_regs.h>
 
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val = (uint32_t)c;
-
-	local_irq_disable();
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	uart[0] = val;
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	local_irq_enable();
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val;
-
-	while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
-	val = uart[0];
-
-	return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
-	unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
-	/* Enable FIFOs */
-	writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-			UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
-		(char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
-	/* Select brtc divisor */
-	writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Store divisor lsb */
-	writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
-	/* Store divisor msb */
-	writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
-	/* Set 8N1 mode */
-	writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Disable flow control */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
-	/* Disable receive interrupt(!) */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
 void __init msp_serial_setup(void)
 {
 	char    *s;
@@ -139,17 +77,6 @@ void __init msp_serial_setup(void)
 		case MACH_MSP7120_FPGA:
 			/* Enable UART1 on MSP4200 and MSP7120 */
 			*GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
-			/* Initialize UART1 for kgdb since PMON doesn't */
-			if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
-				if( mips_machtype == MACH_MSP4200_FPGA
-				 || mips_machtype == MACH_MSP7120_FPGA )
-					initDebugPort(uartclk, 19200);
-				else
-					initDebugPort(uartclk, 57600);
-			}
-#endif
 			break;
 
 		default:
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile
index 8fd9a04e353..b16f95c3df6 100644
--- a/arch/mips/pmc-sierra/yosemite/Makefile
+++ b/arch/mips/pmc-sierra/yosemite/Makefile
@@ -4,7 +4,6 @@
 
 obj-y    += irq.o prom.o py-console.o setup.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_SMP)		+= smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c
deleted file mode 100644
index 6362c702e38..00000000000
--- a/arch/mips/pmc-sierra/yosemite/dbg_io.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define	YOSEMITE_BAUD_2400	2400
-#define	YOSEMITE_BAUD_4800	4800
-#define	YOSEMITE_BAUD_9600	9600
-#define	YOSEMITE_BAUD_19200	19200
-#define	YOSEMITE_BAUD_38400	38400
-#define	YOSEMITE_BAUD_57600	57600
-#define	YOSEMITE_BAUD_115200	115200
-
-#define	YOSEMITE_PARITY_NONE	0
-#define	YOSEMITE_PARITY_ODD	0x08
-#define	YOSEMITE_PARITY_EVEN	0x18
-#define	YOSEMITE_PARITY_MARK	0x28
-#define	YOSEMITE_PARITY_SPACE	0x38
-
-#define	YOSEMITE_DATA_5BIT	0x0
-#define	YOSEMITE_DATA_6BIT	0x1
-#define	YOSEMITE_DATA_7BIT	0x2
-#define	YOSEMITE_DATA_8BIT	0x3
-
-#define	YOSEMITE_STOP_1BIT	0x0
-#define	YOSEMITE_STOP_2BIT	0x4
-
-/* This is crucial */
-#define	SERIAL_REG_OFS		0x1
-
-#define	SERIAL_RCV_BUFFER	0x0
-#define	SERIAL_TRANS_HOLD	0x0
-#define	SERIAL_SEND_BUFFER	0x0
-#define	SERIAL_INTR_ENABLE	(1 * SERIAL_REG_OFS)
-#define	SERIAL_INTR_ID		(2 * SERIAL_REG_OFS)
-#define	SERIAL_DATA_FORMAT	(3 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_CONTROL	(3 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_CONTROL	(4 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_OUTPUT	(4 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_STATUS	(5 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_STATUS	(6 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_INPUT	(6 * SERIAL_REG_OFS)
-#define	SERIAL_SCRATCH_PAD	(7 * SERIAL_REG_OFS)
-
-#define	SERIAL_DIVISOR_LSB	(0 * SERIAL_REG_OFS)
-#define	SERIAL_DIVISOR_MSB	(1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define	SERIAL_READ(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs)))
-
-#define	SERIAL_WRITE(ofs, val)		((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define	SERIAL_READ_1(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs)))
-
-#define	SERIAL_WRITE_1(ofs, val)	((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
-		divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
-		SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
-			       (divisor & 0xff00) >> 8);
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
-		       YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
-	/* Enable Interrupts */
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
-	       unsigned char stop)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
-		divisor = TITAN_SERIAL_BASE_BAUD / baud;
-		SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
-	return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
-	SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
-	return 1;
-}
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 4decc280786..5f673eba142 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void)
 	}
 }
 
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
 /*
  * Initialize the next level interrupt handler
  */
@@ -156,11 +152,6 @@ void __init arch_init_irq(void)
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
 
-#ifdef CONFIG_KGDB
-	/* At this point, initialize the second serial port */
-	init_second_port();
-#endif
-
 #ifdef CONFIG_GDB_CONSOLE
 	register_gdb_console();
 #endif
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 44fb0a62877..82ab395efa3 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -49,8 +49,6 @@
 #define GPIO_ALE (1 << 0x0a)
 #define GPIO_CLE (1 << 0x0b)
 
-extern char *board_type;
-
 static struct resource korina_dev0_res[] = {
 	{
 		.name = "korina_regs",
@@ -265,14 +263,6 @@ static void __init parse_mac_addr(char *macstr)
 }
 
 
-/* DEVICE CONTROLLER 1 */
-#define CFG_DC_DEV1 	((void *)0xb8010010)
-#define CFG_DC_DEV2 	((void *)0xb8010020)
-#define CFG_DC_DEVBASE    0x0
-#define CFG_DC_DEVMASK    0x4
-#define CFG_DC_DEVC       0x8
-#define CFG_DC_DEVTC      0xC
-
 /* NAND definitions */
 #define NAND_CHIP_DELAY	25
 
@@ -301,16 +291,16 @@ static void __init rb532_nand_setup(void)
 static int __init plat_setup_devices(void)
 {
 	/* Look for the CF card reader */
-	if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
+	if (!readl(IDT434_REG_BASE + DEV1MASK))
 		rb532_devs[1] = NULL;
 	else {
 		cf_slot0_res[0].start =
-		    readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
+		    readl(IDT434_REG_BASE + DEV1BASE);
 		cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
 	}
 
 	/* Read the NAND resources from the device controller */
-	nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
+	nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE);
 	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
 
 	/* Initialise the NAND device */
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index b2fe82dba0a..00a1c7877bf 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -64,7 +64,8 @@ static struct resource rb532_dev3_ctl_res[] = {
 
 void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
 {
-	unsigned flags, data;
+	unsigned long flags;
+	unsigned data;
 	unsigned i = 0;
 
 	spin_lock_irqsave(&dev3.lock, flags);
@@ -90,7 +91,7 @@ EXPORT_SYMBOL(get_434_reg);
 
 void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
 {
-	unsigned flags;
+	unsigned long flags;
 
 	spin_lock_irqsave(&dev3.lock, flags);
 
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
index db74edf8cef..8e7a46855b5 100644
--- a/arch/mips/rb532/time.c
+++ b/arch/mips/rb532/time.c
@@ -49,8 +49,8 @@ static unsigned long __init cal_r4koff(void)
 
 void __init plat_time_init(void)
 {
-	unsigned int est_freq, flags;
-	unsigned long r4k_offset;
+	unsigned int est_freq;
+	unsigned long flags, r4k_offset;
 
 	local_irq_save(flags);
 
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 60141235ec4..52486c4d2b0 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -150,7 +150,7 @@ static int __init sgiseeq_devinit(void)
 		return res;
 
 	/* Second HPC is missing? */
-	if (!ip22_is_fullhouse() ||
+	if (ip22_is_fullhouse() ||
 	    get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
 		return 0;
 
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 5f389ee26fc..896a1ef8482 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -20,7 +20,6 @@
 #include <asm/irq.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
-#include <asm/gdb-stub.h>
 #include <asm/io.h>
 #include <asm/traps.h>
 #include <asm/sgialib.h>
@@ -81,30 +80,6 @@ void __init plat_mem_setup(void)
 		add_preferred_console("arc", 0, NULL);
 	}
 
-#ifdef CONFIG_KGDB
-	{
-	char *kgdb_ttyd = prom_getcmdline();
-
-	if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
-		int line;
-		kgdb_ttyd += strlen("kgdb=ttyd");
-		if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
-			printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
-			       ", falling back to /dev/ttyd1\n", *kgdb_ttyd);
-		line = *kgdb_ttyd == '2' ? 0 : 1;
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session\n", line ? 1 : 2);
-		rs_kgdb_hook(line);
-
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session, please connect your debugger\n", line ? 1:2);
-
-		kgdb_enabled = 1;
-		/* Breakpoints and stuff are in sgi_irq_setup() */
-	}
-	}
-#endif
-
 #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
 	{
 		ULONG *gfxinfo;
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index e0a6871d56e..31f4931b848 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -7,7 +7,6 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
 	   ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
-obj-$(CONFIG_KGDB)		+= ip27-dbgio.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c
deleted file mode 100644
index 08fd88b36f8..00000000000
--- a/arch/mips/sgi-ip27/ip27-dbgio.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2004 Ralf Baechle <ralf@linux-mips.org>
- */
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#define IOC3_CLK        (22000000 / 3)
-#define IOC3_FLAGS      (0)
-
-static inline struct ioc3_uartregs *console_uart(void)
-{
-	struct ioc3 *ioc3;
-
-	ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
-
-	return &ioc3->sregs.uarta;
-}
-
-unsigned char getDebugChar(void)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_DR) == 0);
-	return uart->iu_rbr;
-}
-
-void putDebugChar(unsigned char c)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_THRE) == 0);
-	uart->iu_thr = c;
-}
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index db372a0f106..a35818ed426 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ht_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip bcm1480_irq_type = {
 	.name = "BCM1480-IMR",
 	.ack = ack_bcm1480_irq,
@@ -355,61 +331,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		/* QQQ FIXME */
-		__raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-			     (kgdb_irq << 3)));
-		bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
-		register_gdb_console();
-#endif
-		printk("Waiting for GDB on UART port %d\n", kgdb_port);
-		set_debug_traps();
-		breakpoint();
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat.irqs[smp_processor_id()][kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void bcm1480_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void)
 		bcm1480_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)
-		bcm1480_kgdb_interrupt();		/* KGDB (uart 1) */
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 }
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index fd9604d5555..3de30f79db3 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -59,10 +59,6 @@ int cfe_cons_handle;
 extern unsigned long initrd_start, initrd_end;
 #endif
 
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
 static void __noreturn cfe_linux_exit(void *arg)
 {
 	int warm = *(int *)arg;
@@ -246,9 +242,6 @@ void __init prom_init(void)
 	int argc = fw_arg0;
 	char **envp = (char **) fw_arg2;
 	int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
-	char *arg;
-#endif
 
 	_machine_restart   = cfe_linux_restart;
 	_machine_halt      = cfe_linux_halt;
@@ -309,13 +302,6 @@ void __init prom_init(void)
 		}
 	}
 
-#ifdef CONFIG_KGDB
-	if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
-		kgdb_port = (arg[10] == '0') ? 0 : 1;
-	else
-		kgdb_port = 1;
-#endif
-
 #ifdef CONFIG_BLK_DEV_INITRD
 	{
 		char *ptr;
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index eac9065ffe0..a5158483986 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ldt_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip sb1250_irq_type = {
 	.name = "SB1250-IMR",
 	.ack = ack_sb1250_irq,
@@ -313,55 +303,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		__raw_writeq(M_DUART_IMR_BRK,
-			     IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_IMR_REGISTER(0,
-						   R_IMR_INTERRUPT_MAP_BASE) +
-				    (kgdb_irq << 3)));
-		sb1250_unmask_irq(0, kgdb_irq);
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat_this_cpu.irqs[kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void sb1250_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void)
 		sb1250_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)			/* KGDB (uart 1) */
-		sb1250_kgdb_interrupt();
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 	else
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 255d692bfa1..f18ba9201bb 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,4 +1,3 @@
 obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o
-obj-$(CONFIG_KGDB)		+= dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
deleted file mode 100644
index b97ae304848..00000000000
--- a/arch/mips/sibyte/swarm/dbg_io.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- * 	115200, 8, N, 1.
- */
-
-#define	BAUD_RATE		115200
-#define	CLK_DIVISOR		V_DUART_BAUD_RATE(BAUD_RATE)
-#define	DATA_BITS		V_DUART_BITS_PER_CHAR_8		/* or 7    */
-#define	PARITY			V_DUART_PARITY_MODE_NONE	/* or even */
-#define	STOP_BITS		M_DUART_STOP_BIT_LEN_1		/* or 2    */
-
-static int duart_initialized = 0;	/* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define	duart_out(reg, val)	csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)		csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
-	duart_out(R_DUART_MODE_REG_1, data | parity);
-	duart_out(R_DUART_MODE_REG_2, stop);
-	duart_out(R_DUART_CLK_SEL, clk_divisor);
-
-	duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN);	/* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
-	duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
-	return duart_in(R_DUART_RX_HOLD);
-}
-
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 6de4c5aa92b..840fe757c48 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -1,3 +1,27 @@
+config MACH_TX39XX
+	bool
+	select MACH_TXX9
+	select SYS_HAS_CPU_TX39XX
+
+config MACH_TX49XX
+	bool
+	select MACH_TXX9
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_64BIT_KERNEL
+
+config MACH_TXX9
+	bool
+	select DMA_NONCOHERENT
+	select SWAP_IO_SPACE
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+
 config TOSHIBA_JMR3927
 	bool "Toshiba JMR-TX3927 board"
 	depends on MACH_TX39XX
@@ -24,68 +48,37 @@ config TOSHIBA_RBTX4938
 config SOC_TX3927
 	bool
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
 	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX39XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config SOC_TX4927
 	bool
-	select CEVT_R4K
-	select CSRC_R4K
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select IRQ_CPU
 	select IRQ_TXX9
 	select PCI_TX4927
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config SOC_TX4938
 	bool
-	select CEVT_R4K
-	select CSRC_R4K
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select IRQ_CPU
 	select IRQ_TXX9
 	select PCI_TX4927
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config TOSHIBA_FPCIB0
 	bool "FPCIB0 Backplane Support"
-	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	depends on PCI && MACH_TXX9
 	select I8259
 
 config PICMG_PCI_BACKPLANE_DEFAULT
 	bool "Support for PICMG PCI Backplane"
-	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	depends on PCI && MACH_TXX9
 	default y if !TOSHIBA_FPCIB0
 
 if TOSHIBA_RBTX4938
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
index 9c120771e65..9bb34af26b7 100644
--- a/arch/mips/txx9/generic/Makefile
+++ b/arch/mips/txx9/generic/Makefile
@@ -4,9 +4,9 @@
 
 obj-y	+= setup.o
 obj-$(CONFIG_PCI)	+= pci.o
+obj-$(CONFIG_SOC_TX3927)	+= setup_tx3927.o irq_tx3927.o
 obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o setup_tx4927.o irq_tx4927.o
 obj-$(CONFIG_SOC_TX4938)	+= mem_tx4927.o setup_tx4938.o irq_tx4938.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB)	+= dbgio.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c
deleted file mode 100644
index 33b9c672a32..00000000000
--- a/arch/mips/txx9/generic/dbgio.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
- */
-
-#include <linux/types>
-
-extern u8 txx9_sio_kdbg_rd(void);
-extern int txx9_sio_kdbg_wr( u8 ch );
-
-u8 getDebugChar(void)
-{
-	return (txx9_sio_kdbg_rd());
-}
-
-int putDebugChar(u8 byte)
-{
-	return (txx9_sio_kdbg_wr(byte));
-}
-
diff --git a/arch/mips/txx9/generic/irq_tx3927.c b/arch/mips/txx9/generic/irq_tx3927.c
new file mode 100644
index 00000000000..c683f593eda
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx3927.c
@@ -0,0 +1,25 @@
+/*
+ * Common tx3927 irq handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#include <linux/init.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_irq_init(void)
+{
+	int i;
+
+	txx9_irq_init(TX3927_IRC_REG);
+	/* raise priority for timers, sio */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_irq_set_pri(TX3927_IR_TMR(i), 6);
+	for (i = 0; i < TX3927_NR_SIO; i++)
+		txx9_irq_set_pri(TX3927_IR_SIO(i), 7);
+}
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 0b92d8c1320..7b637a7c0e6 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -386,3 +386,39 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return txx9_board_vec->pci_map_irq(dev, slot, pin);
 }
+
+char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
+
+char *__devinit txx9_pcibios_setup(char *str)
+{
+	if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
+		return NULL;
+	if (!strcmp(str, "picmg")) {
+		/* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
+		   (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
+		txx9_pci_option |= TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strcmp(str, "nopicmg")) {
+		/* non-PICMG compliant backplane (TOSHIBA
+		   RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
+		txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strncmp(str, "clk=", 4)) {
+		char *val = str + 4;
+		txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
+		if (strcmp(val, "33") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
+		else if (strcmp(val, "66") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
+		else /* "auto" */
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
+		return NULL;
+	} else if (!strncmp(str, "err=", 4)) {
+		if (!strcmp(str + 4, "panic"))
+			txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
+		else if (!strcmp(str + 4, "ignore"))
+			txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
+		return NULL;
+	}
+	return str;
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 8c60c78b9a9..fe6bee09cec 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -20,9 +20,13 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
+#include <asm/reboot.h>
 #include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
 #ifdef CONFIG_CPU_TX49XX
 #include <asm/txx9/tx4938.h>
 #endif
@@ -49,6 +53,7 @@ txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size)
 		txx9_ce_res[i].name = txx9_ce_res_name[i];
 	}
 
+	txx9_pcode = pcode;
 	sprintf(txx9_pcode_str, "TX%x", pcode);
 	if (base) {
 		txx9_reg_res.start = base & 0xfffffffffULL;
@@ -187,6 +192,117 @@ char * __init prom_getcmdline(void)
 	return &(arcs_cmdline[0]);
 }
 
+static void __noreturn txx9_machine_halt(void)
+{
+	local_irq_disable();
+	clear_c0_status(ST0_IM);
+	while (1) {
+		if (cpu_wait) {
+			(*cpu_wait)();
+			if (cpu_has_counter) {
+				/*
+				 * Clear counter interrupt while it
+				 * breaks WAIT instruction even if
+				 * masked.
+				 */
+				write_c0_compare(0);
+			}
+		}
+	}
+}
+
+/* Watchdog support */
+void __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	platform_device_register_simple("txx9wdt", -1, &res, 1);
+}
+
+/* SPI support */
+void __init txx9_spi_init(int busid, unsigned long base, int irq)
+{
+	struct resource res[] = {
+		{
+			.start	= base,
+			.end	= base + 0x20 - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= irq,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+	platform_device_register_simple("spi_txx9", busid,
+					res, ARRAY_SIZE(res));
+}
+
+void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
+{
+	struct platform_device *pdev =
+		platform_device_alloc("tc35815-mac", id);
+	if (!pdev ||
+	    platform_device_add_data(pdev, ethaddr, 6) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
+void __init txx9_sio_init(unsigned long baseaddr, int irq,
+			  unsigned int line, unsigned int sclk, int nocts)
+{
+#ifdef CONFIG_SERIAL_TXX9
+	struct uart_port req;
+
+	memset(&req, 0, sizeof(req));
+	req.line = line;
+	req.iotype = UPIO_MEM;
+	req.membase = ioremap(baseaddr, 0x24);
+	req.mapbase = baseaddr;
+	req.irq = irq;
+	if (!nocts)
+		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+	if (sclk) {
+		req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/;
+		req.uartclk = sclk;
+	} else
+		req.uartclk = TXX9_IMCLK;
+	early_serial_txx9_setup(&req);
+#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init null_prom_putchar(char c)
+{
+}
+void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+
+void __init prom_putchar(char c)
+{
+	txx9_prom_putchar(c);
+}
+
+static void __iomem *early_txx9_sio_port;
+
+static void __init early_txx9_sio_putchar(char c)
+{
+#define TXX9_SICISR	0x0c
+#define TXX9_SITFIFO	0x1c
+#define TXX9_SICISR_TXALS	0x00000002
+	while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) &
+		 TXX9_SICISR_TXALS))
+		;
+	__raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO);
+}
+
+void __init txx9_sio_putchar_init(unsigned long baseaddr)
+{
+	early_txx9_sio_port = ioremap(baseaddr, 0x24);
+	txx9_prom_putchar = early_txx9_sio_putchar;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
 /* wrappers */
 void __init plat_mem_setup(void)
 {
@@ -194,6 +310,15 @@ void __init plat_mem_setup(void)
 	ioport_resource.end = ~0UL;	/* no limit */
 	iomem_resource.start = 0;
 	iomem_resource.end = ~0UL;	/* no limit */
+
+	/* fallback restart/halt routines */
+	_machine_restart = (void (*)(char *))txx9_machine_halt;
+	_machine_halt = txx9_machine_halt;
+	pm_power_off = txx9_machine_halt;
+
+#ifdef CONFIG_PCI
+	pcibios_plat_setup = txx9_pcibios_setup;
+#endif
 	txx9_board_vec->mem_setup();
 }
 
@@ -204,6 +329,9 @@ void __init arch_init_irq(void)
 
 void __init plat_time_init(void)
 {
+#ifdef CONFIG_CPU_TX49XX
+	mips_hpt_frequency = txx9_cpu_clock / 2;
+#endif
 	txx9_board_vec->time_init();
 }
 
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
new file mode 100644
index 00000000000..7bd963d37fc
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -0,0 +1,130 @@
+/*
+ * TX3927 setup routines
+ * Based on linux/arch/mips/txx9/jmr3927/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <linux/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_wdt_init(void)
+{
+	txx9_wdt_init(TX3927_TMR_REG(2));
+}
+
+void __init tx3927_setup(void)
+{
+	int i;
+	unsigned int conf;
+
+	/* don't enable - see errata */
+	txx9_ccfg_toeon = 0;
+	if (strstr(prom_getcmdline(), "toeon") != NULL)
+		txx9_ccfg_toeon = 1;
+
+	txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
+			  TX3927_REG_SIZE);
+
+	/* SDRAMC,ROMC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(tx3927_romcptr->cr[i] & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	txx9_gbus_clock = txx9_cpu_clock / 2;
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
+
+	/* clear BusErrorOnWrite flag */
+	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
+	if (read_c0_conf() & TX39_CONF_WBON)
+		/* Disable PCI snoop */
+		tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+	else
+		/* Enable PCI SNOOP - with write through only */
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
+	/* do reset on watchdog */
+	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
+
+	printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+	       tx3927_ccfgptr->crir,
+	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+
+	/* TMR */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_tmr_init(TX3927_TMR_REG(i));
+
+	/* DMA */
+	tx3927_dmaptr->mcr = 0;
+	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
+		/* reset channel */
+		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
+		tx3927_dmaptr->ch[i].ccr = 0;
+	}
+	/* enable DMA */
+#ifdef __BIG_ENDIAN
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
+#else
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
+#endif
+
+	/* PIO */
+	__raw_writel(0, &tx3927_pioptr->maskcpu);
+	__raw_writel(0, &tx3927_pioptr->maskext);
+	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+	conf = read_c0_conf();
+	if (!(conf & TX39_CONF_ICE))
+		printk(KERN_INFO "TX3927 I-Cache disabled.\n");
+	if (!(conf & TX39_CONF_DCE))
+		printk(KERN_INFO "TX3927 D-Cache disabled.\n");
+	else if (!(conf & TX39_CONF_WBON))
+		printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
+	else if (!(conf & TX39_CONF_CWFON))
+		printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
+	else
+		printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+}
+
+void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
+{
+	txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr),
+			     TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr),
+			     TXX9_IMCLK);
+	txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK);
+}
+
+void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX3927_SIO_REG(i),
+			      TXX9_IRQ_BASE + TX3927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 89d6e28add9..f80d4b7a694 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_core.h>
 #include <linux/param.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
-void __init tx4927_wdr_init(void)
+static void __init tx4927_wdr_init(void)
 {
 	/* clear WatchDogReset (W1C) */
 	tx4927_ccfg_set(TX4927_CCFG_WDRST);
@@ -29,6 +28,11 @@ void __init tx4927_wdr_init(void)
 	tx4927_ccfg_set(TX4927_CCFG_WR);
 }
 
+void __init tx4927_wdt_init(void)
+{
+	txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
 static struct resource tx4927_sdram_resource[4];
 
 void __init tx4927_setup(void)
@@ -173,22 +177,12 @@ void __init tx4927_time_init(unsigned int tmrnr)
 				     TXX9_IMCLK);
 }
 
-void __init tx4927_setup_serial(void)
+void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
 {
-#ifdef CONFIG_SERIAL_TXX9
 	int i;
-	struct uart_port req;
-
-	for (i = 0; i < 2; i++) {
-		memset(&req, 0, sizeof(req));
-		req.line = i;
-		req.iotype = UPIO_MEM;
-		req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i);
-		req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL;
-		req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
-		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-		req.uartclk = TXX9_IMCLK;
-		early_serial_txx9_setup(&req);
-	}
-#endif /* CONFIG_SERIAL_TXX9 */
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
 }
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index 317378d8579..f3040b9ba05 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_core.h>
 #include <linux/param.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
-void __init tx4938_wdr_init(void)
+static void __init tx4938_wdr_init(void)
 {
 	/* clear WatchDogReset (W1C) */
 	tx4938_ccfg_set(TX4938_CCFG_WDRST);
@@ -29,6 +28,11 @@ void __init tx4938_wdr_init(void)
 	tx4938_ccfg_set(TX4938_CCFG_WR);
 }
 
+void __init tx4938_wdt_init(void)
+{
+	txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
 static struct resource tx4938_sdram_resource[4];
 static struct resource tx4938_sram_resource;
 
@@ -233,11 +237,9 @@ void __init tx4938_time_init(unsigned int tmrnr)
 				     TXX9_IMCLK);
 }
 
-void __init tx4938_setup_serial(void)
+void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask)
 {
-#ifdef CONFIG_SERIAL_TXX9
 	int i;
-	struct uart_port req;
 	unsigned int ch_mask = 0;
 
 	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
@@ -245,15 +247,24 @@ void __init tx4938_setup_serial(void)
 	for (i = 0; i < 2; i++) {
 		if ((1 << i) & ch_mask)
 			continue;
-		memset(&req, 0, sizeof(req));
-		req.line = i;
-		req.iotype = UPIO_MEM;
-		req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i);
-		req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL;
-		req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i);
-		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-		req.uartclk = TXX9_IMCLK;
-		early_serial_txx9_setup(&req);
+		txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4938_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
 	}
-#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+void __init tx4938_spi_init(int busid)
+{
+	txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL,
+		      TXX9_IRQ_BASE + TX4938_IR_SPI);
+}
+
+void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+	u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg);
+
+	if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0);
+	if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
 }
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index 69e487467fa..a2b2d62d88e 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -15,8 +15,6 @@
 #include <asm/io.h>
 #include <asm/txx9/smsc_fdc37m81x.h>
 
-#define DEBUG
-
 /* Common Registers */
 #define SMSC_FDC37M81X_CONFIG_INDEX  0x00
 #define SMSC_FDC37M81X_CONFIG_DATA   0x01
@@ -55,7 +53,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-static unsigned long g_smsc_fdc37m81x_base = 0;
+static unsigned long g_smsc_fdc37m81x_base;
 
 static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
 {
@@ -107,7 +105,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	u8 chip_id;
 
 	if (g_smsc_fdc37m81x_base)
-		printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n",
+		printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
+		       __func__,
 		       field, g_smsc_fdc37m81x_base);
 
 	g_smsc_fdc37m81x_base = port;
@@ -118,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	if (chip_id == SMSC_FDC37M81X_CHIP_ID)
 		smsc_fdc37m81x_config_end();
 	else {
-		printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n",
+		printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
 		       chip_id);
 		g_smsc_fdc37m81x_base = 0;
 	}
@@ -127,22 +126,23 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 }
 
 #ifdef DEBUG
-void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg)
+static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
 {
-	printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
+	printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
+	       key, dev, reg,
 	       smsc_fdc37m81x_rd(reg));
 }
 
 void smsc_fdc37m81x_config_dump(void)
 {
 	u8 orig;
-	char *fname = "smsc_fdc37m81x_config_dump()";
+	const char *fname = __func__;
 
 	smsc_fdc37m81x_config_beg();
 
 	orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
 
-	printk("%s: common\n", fname);
+	printk(KERN_INFO "%s: common\n", fname);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_DNUM);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
@@ -154,7 +154,7 @@ void smsc_fdc37m81x_config_dump(void)
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_PMGT);
 
-	printk("%s: keyboard\n", fname);
+	printk(KERN_INFO "%s: keyboard\n", fname);
 	smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
 				       SMSC_FDC37M81X_ACTIVE);
diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile
index ba292c94566..20d61ac543e 100644
--- a/arch/mips/txx9/jmr3927/Makefile
+++ b/arch/mips/txx9/jmr3927/Makefile
@@ -3,6 +3,5 @@
 #
 
 obj-y	+= prom.o irq.o setup.o
-obj-$(CONFIG_KGDB)	+= kgdb_io.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c
index 070c9a115e5..6ec626c9473 100644
--- a/arch/mips/txx9/jmr3927/irq.c
+++ b/arch/mips/txx9/jmr3927/irq.c
@@ -30,15 +30,11 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
-#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
 
 #include <asm/io.h>
 #include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/processor.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
@@ -46,13 +42,6 @@
 #error JMR3927_IRQ_END > NR_IRQS
 #endif
 
-static unsigned char irc_level[TX3927_NUM_IR] = {
-	5, 5, 5, 5, 5, 5,	/* INT[5:0] */
-	7, 7,			/* SIO */
-	5, 5, 5, 0, 0,		/* DMA, PIO, PCI */
-	6, 6, 6			/* TMR */
-};
-
 /*
  * CP0_STATUS is a thread's resource (saved/restored on context switch).
  * So disable_irq/enable_irq MUST handle IOC/IRC registers.
@@ -103,26 +92,18 @@ static int jmr3927_irq_dispatch(int pending)
 	return irq;
 }
 
-#ifdef CONFIG_PCI
-static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
-{
-	printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
-	printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
-	       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
-
-	return IRQ_HANDLED;
-}
-static struct irqaction pcierr_action = {
-	.handler = jmr3927_pcierr_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "PCI error",
+static struct irq_chip jmr3927_irq_ioc = {
+	.name = "jmr3927_ioc",
+	.ack = mask_irq_ioc,
+	.mask = mask_irq_ioc,
+	.mask_ack = mask_irq_ioc,
+	.unmask = unmask_irq_ioc,
 };
-#endif
-
-static void __init jmr3927_irq_init(void);
 
 void __init jmr3927_irq_setup(void)
 {
+	int i;
+
 	txx9_irq_dispatch = jmr3927_irq_dispatch;
 	/* Now, interrupt control disabled, */
 	/* all IRC interrupts are masked, */
@@ -138,34 +119,10 @@ void __init jmr3927_irq_setup(void)
 	/* clear PCI Reset interrupts */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 
-	jmr3927_irq_init();
+	tx3927_irq_init();
+	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 
 	/* setup IOC interrupt 1 (PCI, MODEM) */
 	set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
-
-#ifdef CONFIG_PCI
-	setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
-#endif
-
-	/* enable all CPU interrupt bits. */
-	set_c0_status(ST0_IM);	/* IE bit is still 0. */
-}
-
-static struct irq_chip jmr3927_irq_ioc = {
-	.name = "jmr3927_ioc",
-	.ack = mask_irq_ioc,
-	.mask = mask_irq_ioc,
-	.mask_ack = mask_irq_ioc,
-	.unmask = unmask_irq_ioc,
-};
-
-static void __init jmr3927_irq_init(void)
-{
-	u32 i;
-
-	txx9_irq_init(TX3927_IRC_REG);
-	for (i = 0; i < TXx9_MAX_IR; i++)
-		txx9_irq_set_pri(i, irc_level[i]);
-	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
-		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 }
diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c
deleted file mode 100644
index 5bd757e56f7..00000000000
--- a/arch/mips/txx9/jmr3927/kgdb_io.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ahennessy@mvista.com or source@mvista.com
- *
- * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/txx9/jmr3927.h>
-
-#define TIMEOUT       0xffffff
-
-static int remoteDebugInitialized = 0;
-static void debugInit(int baud);
-
-int putDebugChar(unsigned char c)
-{
-        int i = 0;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(0)->tfifo = c;
-
-	return 1;
-}
-
-unsigned char getDebugChar(void)
-{
-        int i = 0;
-	int dicr;
-	char c;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-	/* diable RX int. */
-	dicr = tx3927_sioptr(0)->dicr;
-	tx3927_sioptr(0)->dicr = 0;
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
-		;
-	c = tx3927_sioptr(0)->rfifo;
-
-	/* clear RX int. status */
-	tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
-	/* enable RX int. */
-	tx3927_sioptr(0)->dicr = dicr;
-
-	return c;
-}
-
-static void debugInit(int baud)
-{
-	tx3927_sioptr(0)->lcr = 0x020;
-	tx3927_sioptr(0)->dicr = 0;
-	tx3927_sioptr(0)->disr = 0x4100;
-	tx3927_sioptr(0)->cisr = 0x014;
-	tx3927_sioptr(0)->fcr = 0;
-	tx3927_sioptr(0)->flcr = 0x02;
-	tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
-		TXx927_SIBGR_BCLK_T0;
-}
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 2cadb423fac..70c4c8ec3e8 100644
--- a/arch/mips/txx9/jmr3927/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -36,41 +36,18 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <asm/bootinfo.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
-#define TIMEOUT       0xffffff
-
-void
-prom_putchar(char c)
-{
-        int i = 0;
-
-        do {
-            i++;
-            if (i>TIMEOUT)
-                break;
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(1)->tfifo = c;
-	return;
-}
-
-void
-puts(const char *cp)
-{
-    while (*cp)
-	prom_putchar(*cp++);
-    prom_putchar('\r');
-    prom_putchar('\n');
-}
-
 void __init jmr3927_prom_init(void)
 {
 	/* CCFG */
 	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
-		puts("Warning: TX3927 TLB off\n");
+		printk(KERN_ERR "TX3927 TLB off\n");
 
 	prom_init_cmdline();
 	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX3927_SIO_REG(1));
 }
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 03647ebe413..87db41be8a5 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -32,27 +32,18 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
 #include <asm/reboot.h>
+#include <asm/txx9pio.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/jmr3927.h>
 #include <asm/mipsregs.h>
 
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
+static void jmr3927_machine_restart(char *command)
 {
+	local_irq_disable();
 #if 1	/* Resetting PCI bus */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
@@ -61,33 +52,13 @@ static inline void do_reset(void)
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 #endif
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
-}
-
-static void jmr3927_machine_restart(char *command)
-{
-	local_irq_disable();
-	puts("Rebooting...");
-	do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
-	puts("JMR-TX3927 halted.\n");
-	while (1);
-}
-
-static void jmr3927_machine_power_off(void)
-{
-	puts("JMR-TX3927 halted. Please turn off the power.\n");
-	while (1);
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init jmr3927_time_init(void)
 {
-	txx9_clockevent_init(TX3927_TMR_REG(0),
-			     TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
-			     JMR3927_IMCLK);
-	txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+	tx3927_time_init(0, 1);
 }
 
 #define DO_WRITE_THROUGH
@@ -102,11 +73,6 @@ static void __init jmr3927_mem_setup(void)
 	set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
 
 	_machine_restart = jmr3927_machine_restart;
-	_machine_halt = jmr3927_machine_halt;
-	pm_power_off = jmr3927_machine_power_off;
-
-	/* Reboot on panic */
-	panic_timeout = 180;
 
 	/* cache setup */
 	{
@@ -125,7 +91,8 @@ static void __init jmr3927_mem_setup(void)
 #endif
 
 		conf = read_c0_conf();
-		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+			  TX39_CONF_WBON | TX39_CONF_CWFON);
 		conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
 		conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
 		conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
@@ -138,47 +105,14 @@ static void __init jmr3927_mem_setup(void)
 	/* initialize board */
 	jmr3927_board_init();
 
-	argptr = prom_getcmdline();
-
-	if ((argptr = strstr(argptr, "toeon")) != NULL)
-		jmr3927_ccfg_toeon = 1;
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "ip=")) == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " ip=bootp");
-	}
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		int i;
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
-			req.mapbase = TX3927_SIO_REG(i);
-			req.irq = i == 0 ?
-				JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
-			if (i == 0)
-				req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = JMR3927_IMCLK;
-			early_serial_txx9_setup(&req);
-		}
-	}
+	tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=")) == NULL) {
-		argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
 		strcat(argptr, " console=ttyS1,115200");
-	}
-#endif
 #endif
 }
 
-static void tx3927_setup(void);
-
 static void __init jmr3927_pci_setup(void)
 {
 #ifdef CONFIG_PCI
@@ -199,32 +133,13 @@ static void __init jmr3927_pci_setup(void)
 		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	}
 	tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+	tx3927_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
 static void __init jmr3927_board_init(void)
 {
-	tx3927_setup();
-	jmr3927_pci_setup();
-
-	/* SIO0 DTR on */
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
-	jmr3927_led_set(0);
-
-	printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
-	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_dipsw1(), jmr3927_dipsw2(),
-	       jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
-	int i;
-
 	txx9_cpu_clock = JMR3927_CORECLK;
-	txx9_gbus_clock = JMR3927_GBUSCLK;
 	/* SDRAMC are configured by PROM */
 
 	/* ROMC */
@@ -233,74 +148,32 @@ static void __init tx3927_setup(void)
 	tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
 	tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
 
-	/* CCFG */
-	/* enable Timeout BusError */
-	if (jmr3927_ccfg_toeon)
-		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
-	/* clear BusErrorOnWrite flag */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
-	/* Disable PCI snoop */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
-	/* do reset on watchdog */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
-	/* Enable PCI SNOOP - with write through only */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
 	/* Pin selection */
 	tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
 	tx3927_ccfgptr->pcfg |=
 		TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
 		(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
 
-	printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
-	       tx3927_ccfgptr->crir,
-	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
-	/* TMR */
-	for (i = 0; i < TX3927_NR_TMR; i++)
-		txx9_tmr_init(TX3927_TMR_REG(i));
-
-	/* DMA */
-	tx3927_dmaptr->mcr = 0;
-	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
-		/* reset channel */
-		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
-		tx3927_dmaptr->ch[i].ccr = 0;
-	}
-	/* enable DMA */
-#ifdef __BIG_ENDIAN
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
+	tx3927_setup();
 
-	/* PIO */
 	/* PIO[15:12] connected to LEDs */
 	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
-	__raw_writel(0, &tx3927_pioptr->maskcpu);
-	__raw_writel(0, &tx3927_pioptr->maskext);
-	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
 	gpio_request(11, "dipsw1");
 	gpio_request(10, "dipsw2");
-	{
-		unsigned int conf;
 
-	conf = read_c0_conf();
-               if (!(conf & TX39_CONF_ICE))
-                       printk("TX3927 I-Cache disabled.\n");
-               if (!(conf & TX39_CONF_DCE))
-                       printk("TX3927 D-Cache disabled.\n");
-               else if (!(conf & TX39_CONF_WBON))
-                       printk("TX3927 D-Cache WriteThrough.\n");
-               else if (!(conf & TX39_CONF_CWFON))
-                       printk("TX3927 D-Cache WriteBack.\n");
-               else
-                       printk("TX3927 D-Cache WriteBack (CWF) .\n");
-	}
+	jmr3927_pci_setup();
+
+	/* SIO0 DTR on */
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+	jmr3927_led_set(0);
+
+	printk(KERN_INFO
+	       "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_dipsw1(), jmr3927_dipsw2(),
+	       jmr3927_dipsw3(), jmr3927_dipsw4());
 }
 
 /* This trick makes rtc-ds1742 driver usable as is. */
@@ -316,42 +189,21 @@ static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
 #endif
 }
 
-static int __init jmr3927_rtc_init(void)
+static void __init jmr3927_rtc_init(void)
 {
 	static struct resource __initdata res = {
 		.start	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
 		.end	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
 		.flags	= IORESOURCE_MEM,
 	};
-	struct platform_device *dev;
-	dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
-{
-	return txx9_wdt_init(TX3927_TMR_REG(2));
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
 static void __init jmr3927_device_init(void)
 {
 	__swizzle_addr_b = jmr3927_swizzle_addr_b;
 	jmr3927_rtc_init();
-	jmr3927_wdt_init();
+	tx3927_wdt_init();
 }
 
 struct txx9_board_vec jmr3927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
index cd748a93032..00cd5231da3 100644
--- a/arch/mips/txx9/rbtx4927/irq.c
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -27,85 +27,86 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 /*
-IRQ  Device
-00   RBTX4927-ISA/00
-01   RBTX4927-ISA/01 PS2/Keyboard
-02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03   RBTX4927-ISA/03
-04   RBTX4927-ISA/04
-05   RBTX4927-ISA/05
-06   RBTX4927-ISA/06
-07   RBTX4927-ISA/07
-08   RBTX4927-ISA/08
-09   RBTX4927-ISA/09
-10   RBTX4927-ISA/10
-11   RBTX4927-ISA/11
-12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13   RBTX4927-ISA/13
-14   RBTX4927-ISA/14 IDE
-15   RBTX4927-ISA/15
-
-16   TX4927-CP0/00 Software 0
-17   TX4927-CP0/01 Software 1
-18   TX4927-CP0/02 Cascade TX4927-CP0
-19   TX4927-CP0/03 Multiplexed -- do not use
-20   TX4927-CP0/04 Multiplexed -- do not use
-21   TX4927-CP0/05 Multiplexed -- do not use
-22   TX4927-CP0/06 Multiplexed -- do not use
-23   TX4927-CP0/07 CPU TIMER
-
-24   TX4927-PIC/00
-25   TX4927-PIC/01
-26   TX4927-PIC/02
-27   TX4927-PIC/03 Cascade RBTX4927-IOC
-28   TX4927-PIC/04
-29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30   TX4927-PIC/06
-31   TX4927-PIC/07
-32   TX4927-PIC/08 TX4927 SerialIO Channel 0
-33   TX4927-PIC/09 TX4927 SerialIO Channel 1
-34   TX4927-PIC/10
-35   TX4927-PIC/11
-36   TX4927-PIC/12
-37   TX4927-PIC/13
-38   TX4927-PIC/14
-39   TX4927-PIC/15
-40   TX4927-PIC/16 TX4927 PCI PCI-C
-41   TX4927-PIC/17
-42   TX4927-PIC/18
-43   TX4927-PIC/19
-44   TX4927-PIC/20
-45   TX4927-PIC/21
-46   TX4927-PIC/22 TX4927 PCI PCI-ERR
-47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48   TX4927-PIC/24
-49   TX4927-PIC/25
-50   TX4927-PIC/26
-51   TX4927-PIC/27
-52   TX4927-PIC/28
-53   TX4927-PIC/29
-54   TX4927-PIC/30
-55   TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
+ * I8259A_IRQ_BASE+00
+ * I8259A_IRQ_BASE+01 PS2/Keyboard
+ * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15)
+ * I8259A_IRQ_BASE+03
+ * I8259A_IRQ_BASE+04
+ * I8259A_IRQ_BASE+05
+ * I8259A_IRQ_BASE+06
+ * I8259A_IRQ_BASE+07
+ * I8259A_IRQ_BASE+08
+ * I8259A_IRQ_BASE+09
+ * I8259A_IRQ_BASE+10
+ * I8259A_IRQ_BASE+11
+ * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time)
+ * I8259A_IRQ_BASE+13
+ * I8259A_IRQ_BASE+14 IDE
+ * I8259A_IRQ_BASE+15
+ *
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02
+ * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet
+ * TXX9_IRQ_BASE+06
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0
+ * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1
+ * TXX9_IRQ_BASE+10
+ * TXX9_IRQ_BASE+11
+ * TXX9_IRQ_BASE+12
+ * TXX9_IRQ_BASE+13
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C
+ * TXX9_IRQ_BASE+17
+ * TXX9_IRQ_BASE+18
+ * TXX9_IRQ_BASE+19
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR
+ * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used)
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31
+ *
+ * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge)
+ * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge)
+ * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR)
+ * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4)
+ * RBTX4927_IRQ_IOC+04
+ * RBTX4927_IRQ_IOC+05
+ * RBTX4927_IRQ_IOC+06
+ * RBTX4927_IRQ_IOC+07
+ *
+ * NOTES:
+ * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+ * SouthBridge/ISA/pin=0 no pci irq used by this device
+ * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR
+ * via ISA IRQ14
+ * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+ * SouthBridge/PMC/pin=0 no pci irq used by this device
+ * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+ * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+ * JP7 is not bus master -- do NOT use -- only 4 pci bus master's
+ * allowed -- SouthBridge, JP4, JP5, JP6
+ */
 
 #include <linux/init.h>
 #include <linux/types.h>
@@ -134,7 +135,7 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq)
 	level3 = readb(rbtx4927_imstat_addr) & 0x1f;
 	if (level3)
 		sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
-	return (sw_irq);
+	return sw_irq;
 }
 
 static void __init toshiba_rbtx4927_irq_ioc_init(void)
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index 5c0de54ebdd..1dc0a5b1956 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -38,4 +38,5 @@ void __init rbtx4927_prom_init(void)
 {
 	prom_init_cmdline();
 	add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 3da20ea3e55..0d39bafea79 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -46,12 +46,9 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
@@ -103,6 +100,7 @@ static void __init tx4927_pci_setup(void)
 		tx4927_report_pciclk();
 		tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
 	}
+	tx4927_setup_pcierr_irq();
 }
 
 static void __init tx4937_pci_setup(void)
@@ -149,6 +147,7 @@ static void __init tx4937_pci_setup(void)
 		tx4938_report_pciclk();
 		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
 	}
+	tx4938_setup_pcierr_irq();
 }
 
 static void __init rbtx4927_arch_init(void)
@@ -165,17 +164,8 @@ static void __init rbtx4937_arch_init(void)
 #define rbtx4937_arch_init NULL
 #endif /* CONFIG_PCI */
 
-static void __noreturn wait_forever(void)
-{
-	while (1)
-		if (cpu_wait)
-			(*cpu_wait)();
-}
-
 static void toshiba_rbtx4927_restart(char *command)
 {
-	printk(KERN_NOTICE "System Rebooting...\n");
-
 	/* enable the s/w reset register */
 	writeb(1, rbtx4927_softresetlock_addr);
 
@@ -186,24 +176,8 @@ static void toshiba_rbtx4927_restart(char *command)
 	/* do a s/w reset */
 	writeb(1, rbtx4927_softreset_addr);
 
-	/* do something passive while waiting for reset */
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-static void toshiba_rbtx4927_halt(void)
-{
-	printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-static void toshiba_rbtx4927_power_off(void)
-{
-	toshiba_rbtx4927_halt();
-	/* no return */
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init rbtx4927_clock_init(void);
@@ -214,9 +188,6 @@ static void __init rbtx4927_mem_setup(void)
 	u32 cp0_config;
 	char *argptr;
 
-	/* f/w leaves this on at startup */
-	clear_c0_status(ST0_ERL);
-
 	/* enable caches -- HCP5 does this, pmon does not */
 	cp0_config = read_c0_config();
 	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
@@ -231,37 +202,21 @@ static void __init rbtx4927_mem_setup(void)
 	}
 
 	_machine_restart = toshiba_rbtx4927_restart;
-	_machine_halt = toshiba_rbtx4927_halt;
-	pm_power_off = toshiba_rbtx4927_power_off;
 
 #ifdef CONFIG_PCI
 	txx9_alloc_pci_controller(&txx9_primary_pcic,
 				  RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
 				  RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
 	set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
 #endif
 
-	tx4927_setup_serial();
+	tx4927_sio_init(0, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-
-#ifdef CONFIG_ROOT_NFS
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "root=") == NULL) {
-                strcat(argptr, " root=/dev/nfs rw");
-        }
-#endif
-
-#ifdef CONFIG_IP_PNP
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "ip=") == NULL) {
-                strcat(argptr, " ip=any");
-        }
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS0,38400");
 #endif
 }
 
@@ -324,19 +279,17 @@ static void __init rbtx4927_time_init(void)
 	tx4927_time_init(0);
 }
 
-static int __init toshiba_rbtx4927_rtc_init(void)
+static void __init toshiba_rbtx4927_rtc_init(void)
 {
 	struct resource res = {
 		.start	= RBTX4927_BRAMRTC_BASE - IO_BASE,
 		.end	= RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
 		.flags	= IORESOURCE_MEM,
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
-static int __init rbtx4927_ne_init(void)
+static void __init rbtx4927_ne_init(void)
 {
 	struct resource res[] = {
 		{
@@ -348,36 +301,14 @@ static int __init rbtx4927_ne_init(void)
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
-	return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static void __init rbtx4927_device_init(void)
 {
 	toshiba_rbtx4927_rtc_init();
 	rbtx4927_ne_init();
-	rbtx4927_wdt_init();
+	tx4927_wdt_init();
 }
 
 struct txx9_board_vec rbtx4927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index 3971a061657..ca2f8306ce9 100644
--- a/arch/mips/txx9/rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -11,59 +11,57 @@
  */
 
 /*
-IRQ  Device
-
-16   TX4938-CP0/00 Software 0
-17   TX4938-CP0/01 Software 1
-18   TX4938-CP0/02 Cascade TX4938-CP0
-19   TX4938-CP0/03 Multiplexed -- do not use
-20   TX4938-CP0/04 Multiplexed -- do not use
-21   TX4938-CP0/05 Multiplexed -- do not use
-22   TX4938-CP0/06 Multiplexed -- do not use
-23   TX4938-CP0/07 CPU TIMER
-
-24   TX4938-PIC/00
-25   TX4938-PIC/01
-26   TX4938-PIC/02 Cascade RBTX4938-IOC
-27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28   TX4938-PIC/04
-29   TX4938-PIC/05 TX4938 ETH1
-30   TX4938-PIC/06 TX4938 ETH0
-31   TX4938-PIC/07
-32   TX4938-PIC/08 TX4938 SIO 0
-33   TX4938-PIC/09 TX4938 SIO 1
-34   TX4938-PIC/10 TX4938 DMA0
-35   TX4938-PIC/11 TX4938 DMA1
-36   TX4938-PIC/12 TX4938 DMA2
-37   TX4938-PIC/13 TX4938 DMA3
-38   TX4938-PIC/14
-39   TX4938-PIC/15
-40   TX4938-PIC/16 TX4938 PCIC
-41   TX4938-PIC/17 TX4938 TMR0
-42   TX4938-PIC/18 TX4938 TMR1
-43   TX4938-PIC/19 TX4938 TMR2
-44   TX4938-PIC/20
-45   TX4938-PIC/21
-46   TX4938-PIC/22 TX4938 PCIERR
-47   TX4938-PIC/23
-48   TX4938-PIC/24
-49   TX4938-PIC/25
-50   TX4938-PIC/26
-51   TX4938-PIC/27
-52   TX4938-PIC/28
-53   TX4938-PIC/29
-54   TX4938-PIC/30
-55   TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/mipsregs.h>
@@ -93,9 +91,6 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq)
 	return sw_irq;
 }
 
-/**********************************************************************************/
-/* Functions for ioc                                                              */
-/**********************************************************************************/
 static void __init
 toshiba_rbtx4938_irq_ioc_init(void)
 {
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index ee189519ce5..d73123cd2ab 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -22,4 +22,5 @@ void __init rbtx4938_prom_init(void)
 	prom_init_cmdline();
 #endif
 	add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 6c2b99bb8af..9ab48dec0fe 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -13,9 +13,6 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
@@ -28,33 +25,14 @@
 #include <asm/txx9/spi.h>
 #include <asm/txx9pio.h>
 
-static void rbtx4938_machine_halt(void)
-{
-        printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-
-	while (1)
-		__asm__(".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0");
-}
-
-static void rbtx4938_machine_power_off(void)
-{
-        rbtx4938_machine_halt();
-        /* no return */
-}
-
 static void rbtx4938_machine_restart(char *command)
 {
 	local_irq_disable();
-
-	printk("Rebooting...");
 	writeb(1, rbtx4938_softresetlock_addr);
 	writeb(1, rbtx4938_sfvol_addr);
 	writeb(1, rbtx4938_softreset_addr);
-	while(1)
-		;
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init rbtx4938_pci_setup(void)
@@ -121,6 +99,7 @@ static void __init rbtx4938_pci_setup(void)
 		register_pci_controller(c);
 		tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
 	}
+	tx4938_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
@@ -151,19 +130,7 @@ static int __init rbtx4938_ethaddr_init(void)
 		if (sum)
 			printk(KERN_WARNING "seeprom: bad checksum.\n");
 	}
-	for (i = 0; i < 2; i++) {
-		unsigned int id =
-			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
-		struct platform_device *pdev;
-		if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
-		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
-			continue;
-		pdev = platform_device_alloc("tc35815-mac", id);
-		if (!pdev ||
-		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
-		    platform_device_add(pdev))
-			platform_device_put(pdev);
-	}
+	tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
 #endif /* CONFIG_PCI */
 	return 0;
 }
@@ -193,51 +160,36 @@ static void __init rbtx4938_mem_setup(void)
 
 #ifdef CONFIG_PCI
 	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
 	set_io_port_base(RBTX4938_ETHER_BASE);
 #endif
 
-	tx4938_setup_serial();
+	tx4938_sio_init(7372800, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS0,38400");
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	printk("PIOSEL: disabling both ata and nand selection\n");
-	local_irq_disable();
+	printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
 	txx9_clear64(&tx4938_ccfgptr->pcfg,
 		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-	printk("PIOSEL: enabling nand selection\n");
+	printk(KERN_INFO "PIOSEL: enabling nand selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-	printk("PIOSEL: enabling ata selection\n");
+	printk(KERN_INFO "PIOSEL: enabling ata selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif
 
-#ifdef CONFIG_IP_PNP
-	argptr = prom_getcmdline();
-	if (strstr(argptr, "ip=") == NULL) {
-		strcat(argptr, " ip=any");
-	}
-#endif
-
-
-#ifdef CONFIG_FB
-	{
-		conswitchp = &dummy_con;
-	}
-#endif
-
 	rbtx4938_spi_setup();
 	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
 	/* fixup piosel */
@@ -258,11 +210,9 @@ static void __init rbtx4938_mem_setup(void)
 	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
 	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
-		printk("request resource for fpga failed\n");
+		printk(KERN_ERR "request resource for fpga failed\n");
 
 	_machine_restart = rbtx4938_machine_restart;
-	_machine_halt = rbtx4938_machine_halt;
-	pm_power_off = rbtx4938_machine_power_off;
 
 	writeb(0xff, rbtx4938_led_addr);
 	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
@@ -270,7 +220,7 @@ static void __init rbtx4938_mem_setup(void)
 	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
 }
 
-static int __init rbtx4938_ne_init(void)
+static void __init rbtx4938_ne_init(void)
 {
 	struct resource res[] = {
 		{
@@ -282,10 +232,7 @@ static int __init rbtx4938_ne_init(void)
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
@@ -321,24 +268,6 @@ static struct gpio_chip rbtx4938_spi_gpio_chip = {
 	.ngpio = 3,
 };
 
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
-	struct resource res[] = {
-		{
-			.start	= base,
-			.end	= base + 0x20 - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= irq,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-	platform_device_register_simple("spi_txx9", 0,
-					res, ARRAY_SIZE(res));
-}
-
 static int __init rbtx4938_spi_init(void)
 {
 	struct spi_board_info srtc_info = {
@@ -361,7 +290,7 @@ static int __init rbtx4938_spi_init(void)
 	gpio_direction_output(16 + SEEPROM2_CS, 1);
 	gpio_request(16 + SEEPROM3_CS, "seeprom3");
 	gpio_direction_output(16 + SEEPROM3_CS, 1);
-	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+	tx4938_spi_init(0);
 	return 0;
 }
 
@@ -372,30 +301,11 @@ static void __init rbtx4938_arch_init(void)
 	rbtx4938_spi_init();
 }
 
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
-	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-
 static void __init rbtx4938_device_init(void)
 {
 	rbtx4938_ethaddr_init();
 	rbtx4938_ne_init();
-	rbtx4938_wdt_init();
+	tx4938_wdt_init();
 }
 
 struct txx9_board_vec rbtx4938_vec __initdata = {
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index cba36a247e3..92dd1a0ca35 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -72,6 +72,7 @@ static void irq_dispatch(unsigned int irq)
 	cascade = irq_cascade + irq;
 	if (cascade->get_irq != NULL) {
 		unsigned int source_irq = irq;
+		int ret;
 		desc = irq_desc + source_irq;
 		if (desc->chip->mask_ack)
 			desc->chip->mask_ack(source_irq);
@@ -79,8 +80,9 @@ static void irq_dispatch(unsigned int irq)
 			desc->chip->mask(source_irq);
 			desc->chip->ack(source_irq);
 		}
-		irq = cascade->get_irq(irq);
-		if (irq < 0)
+		ret = cascade->get_irq(irq);
+		irq = ret;
+		if (ret < 0)
 			atomic_inc(&irq_err_count);
 		else
 			irq_dispatch(irq);
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 11de3606eee..b7cbb1487af 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -716,6 +716,12 @@ ENTRY(sys_call_table)
 	.long sys_fallocate		/* 325 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 330 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 
 nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 8b054e7a8ae..aa07d0cd190 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -17,7 +17,6 @@ static const char serial_revdate[] = "2007-11-06";
 #define SUPPORT_SYSRQ
 #endif
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/serial.h>
 #include <linux/circ_buf.h>
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
index 0e4d2f6fa6e..8fa36893df7 100644
--- a/arch/mn10300/kernel/module.c
+++ b/arch/mn10300/kernel/module.c
@@ -24,6 +24,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/bug.h>
 
 #if 0
 #define DEBUGP printk
@@ -195,7 +196,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 /*
@@ -203,4 +204,5 @@ int module_finalize(const Elf_Ehdr *hdr,
  */
 void module_arch_cleanup(struct module *mod)
 {
+	module_bug_cleanup(mod);
 }
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 78f092ca031..33cf25025da 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -174,7 +174,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
 	 */
-	if (in_interrupt() || !mm)
+	if (in_atomic() || !mm)
 		goto no_context;
 
 	down_read(&mm->mmap_sem);
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 1263f00dc35..12c04c5e558 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -84,22 +84,28 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	dirent = buf->previous;
 	if (dirent)
-		put_user(offset, &dirent->d_off);
+		if (put_user(offset, &dirent->d_off))
+			goto Efault;
 	dirent = buf->current_dir;
+	if (put_user(d_ino, &dirent->d_ino) ||
+	    put_user(reclen, &dirent->d_reclen) ||
+	    put_user(namlen, &dirent->d_namlen) ||
+	    copy_to_user(dirent->d_name, name, namlen) ||
+	    put_user(0, dirent->d_name + namlen))
+		goto Efault;
 	buf->previous = dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(reclen, &dirent->d_reclen);
-	put_user(namlen, &dirent->d_namlen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	dirent = (void __user *)dirent + reclen;
-	buf->current_dir = dirent;
+	buf->current_dir = (void __user *)dirent + reclen;
 	buf->count -= reclen;
 	return 0;
+Efault:
+	buf->error = -EFAULT;
+	return -EFAULT;
 }
 
 #undef NAME_OFFSET
@@ -126,8 +132,10 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i
 	error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
-		put_user(file->f_pos, &lastdirent->d_off);
-		error = count - buf.count;
+		if (put_user(file->f_pos, &lastdirent->d_off))
+			error = -EFAULT;
+		else
+			error = count - buf.count;
 	}
 
 out_putf:
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index fdacdd4341c..44138c3e6ea 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -47,7 +47,9 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/bug.h>
+#include <linux/uaccess.h>
 
+#include <asm/sections.h>
 #include <asm/unwind.h>
 
 #if 0
@@ -860,3 +862,15 @@ void module_arch_cleanup(struct module *mod)
 	deregister_unwind_table(mod);
 	module_bug_cleanup(mod);
 }
+
+#ifdef CONFIG_64BIT
+void *dereference_function_descriptor(void *ptr)
+{
+	Elf64_Fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->addr, p))
+		ptr = p;
+	return ptr;
+}
+#endif
diff --git a/arch/powerpc/.gitignore b/arch/powerpc/.gitignore
deleted file mode 100644
index a1a869c8c84..00000000000
--- a/arch/powerpc/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-include
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 8c8aadbe956..4ebc52a19f0 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -97,7 +97,7 @@ config IRQSTACKS
 
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
-	depends on DEBUG_FS && PPC_MERGE
+	depends on DEBUG_FS
 	help
 	  This option will show the mapping relationship between hardware irq
 	  numbers and virtual irq numbers. The mapping is exposed via debugfs
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 9155c9312c1..c6be19e9cea 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -116,6 +116,11 @@ ifeq ($(CONFIG_6xx),y)
 KBUILD_CFLAGS		+= -mcpu=powerpc
 endif
 
+# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
+ifeq ($(CONFIG_FTRACE),y)
+KBUILD_CFLAGS		+= -mno-sched-epilog
+endif
+
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
 cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 14174aa2407..65d1a8454d2 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -49,7 +49,7 @@ zlib       := inffast.c inflate.c inftrees.c
 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
 zliblinuxheader := zlib.h zconf.h zutil.h
 
-$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
+$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
 	$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
 
 src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
@@ -195,7 +195,7 @@ image-$(CONFIG_PPC_CELLEB)		+= zImage.pseries
 image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
 image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
 image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
-image-$(CONFIG_PPC_HOLLY)		+= zImage.holly
+image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
 image-$(CONFIG_PPC_PRPMC2800)		+= dtbImage.prpmc2800
 image-$(CONFIG_PPC_ISERIES)		+= zImage.iseries
 image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 7345743d3d9..fbc930410ff 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -68,6 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <132000000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index e74c045a0f8..b157d1885a2 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -51,6 +51,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 8dfab566258..700e076ef3f 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -52,6 +52,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 49ca3497eef..cdd3063258e 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -50,6 +50,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index ba586cb7afb..783241c0024 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -57,6 +57,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 3701dae1ee0..a3b76a70995 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -61,6 +61,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <264000000>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 8acd1d6577f..89c9202f8bd 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -149,18 +149,14 @@
 		};
 
 		crypto@30000 {
-			compatible = "fsl,sec2-crypto";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
-			interrupts = <11 8>;
+			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x7e>;
-			/*
-			 * desc mask is for rev1.x, we need runtime fixup
-			 * for >=2.x
-			 */
-			descriptor-types-mask = <0x1010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: interrupt-controller@700 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 0a700cb5f61..432782b6d20 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 29c8c76a58f..ed32c8ddafe 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d641a8985ea..f4db9ed4a30 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 02cfa24a169..1505d6855ef 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -49,6 +49,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
 		reg = <0xffe00000 0x1000>;
 		bus-frequency = <0>;		// Filled out by uboot.
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index f2273a872b1..9568bfaff8f 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index c4469f19ff8..6480f4fd96e 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 7d3829d3495..f1fb20737e3 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -54,6 +54,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index d84466bb7ec..431b496270d 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -58,6 +58,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index e03a7800628..d833a5c4f47 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index ba8159de040..4d1f2f28409 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x200>;
 		bus-frequency = <330000000>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 9c30a34821d..a15f10343f5 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -60,6 +60,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 08c61e3daec..e124dd18fb5 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -68,6 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
 		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 666185f5945..584a4f184eb 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -202,6 +202,11 @@
 			fsl,has-rstcr;
 		};
 
+		wdt@e4000 {
+			compatible = "fsl,mpc8610-wdt";
+			reg = <0xe4000 0x100>;
+		};
+
 		i2s@16000 {
 			compatible = "fsl,mpc8610-ssi";
 			cell-index = <0>;
@@ -276,7 +281,7 @@
 				cell-index = <0>;
 				reg = <0x0 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <60 2>;
+				interrupts = <76 2>;
 			};
 			dma-channel@1 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -284,7 +289,7 @@
 				cell-index = <1>;
 				reg = <0x80 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <61 2>;
+				interrupts = <77 2>;
 			};
 			dma-channel@2 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -292,7 +297,7 @@
 				cell-index = <2>;
 				reg = <0x100 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <62 2>;
+				interrupts = <78 2>;
 			};
 			dma-channel@3 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -300,7 +305,7 @@
 				cell-index = <3>;
 				reg = <0x180 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <63 2>;
+				interrupts = <79 2>;
 			};
 		};
 
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index ae08761ffff..d665e767822 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -411,7 +411,7 @@
 			0xe000 0 0 1 &i8259 12 2
 			0xe100 0 0 2 &i8259 9 2
 			0xe200 0 0 3 &i8259 10 2
-			0xe300 0 0 4 &i8259 112
+			0xe300 0 0 4 &i8259 11 2
 
 			// IDSEL 0x1d  Audio
 			0xe800 0 0 1 &i8259 6 2
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 64d2d5bbcdf..4199e89b4e5 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -50,13 +50,14 @@
 		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
 	};
 
-	soc8548@a0000000 {
+	soc@a0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xa0000000 0x100000>;
 		reg = <0xa0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
 
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
@@ -83,6 +84,11 @@
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@3100 {
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 2563112cabd..58ee4185454 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -50,13 +50,14 @@
 		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
 	};
 
-	soc8548@e0000000 {
+	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
 
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 340018cf16b..f4e4ba69eef 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -139,6 +139,11 @@
 					interrupt-parent = <&UIC0>;
 				};
 
+				fpga@2,2000 {
+					compatible = "pika,fpga-sgl";
+			   		reg = <0x00000002 0x00002000 0x00000200>;
+				};
+
 				fpga@2,4000 {
 					compatible = "pika,fpga-sd";
 					reg = <0x00000002 0x00004000 0x00000A00>;
@@ -152,7 +157,7 @@
 					#size-cells = <1>;
 					partition@300000 {
 						label = "fpga";
-						reg = <0x0030000 0x00040000>;
+						reg = <0x0300000 0x00040000>;
 					};
 					partition@340000 {
 						label = "env";
@@ -181,7 +186,6 @@
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
-				index = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -191,6 +195,12 @@
 					interrupts = <0x19 0x8>;
 					interrupt-parent = <&UIC0>;
 				};
+
+				/* This will create 52 and 53 */
+				at24@52 {
+					compatible = "at,24c04";
+					reg = <0x52>;
+				};
 			};
 
 			GPIO0: gpio@ef600b00 {
@@ -209,7 +219,13 @@
 				led@31 {
 					compatible = "linux,gpio-led";
 					linux,name = ":green:";
-					gpios = <&GPIO1 0x30 0>;
+					gpios = <&GPIO1 31 0>;
+				};		
+	
+				led@30 {	
+					compatible = "linux,gpio-led";
+					linux,name = ":red:";
+					gpios = <&GPIO1 30 0>;
 				};
 			};
 
diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h
index ccaedaec50d..7c09f4861fe 100644
--- a/arch/powerpc/boot/io.h
+++ b/arch/powerpc/boot/io.h
@@ -6,7 +6,7 @@
 /*
  * Low-level I/O routines.
  *
- * Copied from <file:include/asm-powerpc/io.h> (which has no copyright)
+ * Copied from <file:arch/powerpc/include/asm/io.h> (which has no copyright)
  */
 static inline int in_8(const volatile unsigned char *addr)
 {
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 644bf9d4ea0..965c237c122 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -165,7 +165,7 @@ cuboot*)
     binary=y
     gzip=
     case "$platform" in
-    *-mpc885ads|*-adder875*|*-ep88xc)
+    *-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc)
         platformo=$object/cuboot-8xx.o
         ;;
     *5200*|*-motionpro)
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index e24240a9a04..2113ae2ab40 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:50:09 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:34:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -188,7 +201,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -206,13 +218,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -222,6 +238,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -232,6 +250,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -241,17 +260,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -289,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -340,6 +353,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -352,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -576,6 +598,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -614,12 +637,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -635,13 +655,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -658,10 +689,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -678,12 +705,16 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -701,6 +732,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -744,17 +776,16 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -769,7 +800,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -818,6 +848,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -828,14 +859,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -856,8 +885,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -867,6 +898,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -874,6 +906,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -881,9 +914,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -896,17 +932,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -918,51 +967,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 2f475391f1d..565ed9666c5 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:51:43 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:36:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -186,7 +199,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -204,13 +216,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -689,6 +712,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -699,14 +723,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -738,6 +762,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 9ef4d8a312c..987a4481800 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:52:30 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:38:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -186,7 +199,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -204,13 +216,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -689,6 +712,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -699,14 +723,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -738,6 +762,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index 3b2689e5002..aee79338f41 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:54:12 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:40:56 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -189,7 +202,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -207,13 +219,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -223,6 +239,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -233,6 +251,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -242,17 +261,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -290,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -341,6 +354,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -353,6 +368,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -567,6 +589,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -605,12 +628,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -626,13 +646,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -649,16 +680,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -667,13 +696,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -688,7 +715,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -737,6 +763,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -747,14 +774,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -775,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -786,6 +813,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -793,6 +821,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -800,9 +829,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -815,17 +847,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -837,51 +882,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index c44db554cdc..e920693535a 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:36:39 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 08:43:44 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -112,13 +118,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -129,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_BAMBOO=y
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -193,7 +210,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -211,14 +227,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -227,6 +247,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -237,6 +259,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -246,17 +269,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -294,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -345,6 +362,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -370,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -393,12 +414,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -433,7 +457,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -443,12 +466,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -461,6 +484,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -468,6 +492,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -494,6 +519,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -532,12 +558,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -553,13 +576,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -576,16 +610,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -594,13 +626,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -615,7 +645,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -663,6 +692,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -673,14 +703,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -701,8 +729,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -712,6 +742,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -719,6 +750,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -726,9 +758,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -741,19 +776,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -765,51 +811,85 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index a3b763c45ec..74da5c7754a 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc1
-# Thu Feb 21 14:29:28 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 08:46:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -73,8 +77,9 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,12 +88,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
-# CONFIG_LOGBUFFER is not set
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_COMPAT_BRK=y
@@ -109,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -126,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -140,25 +155,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
 CONFIG_CANYONLANDS=y
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_460EX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -190,7 +205,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -208,16 +222,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
 CONFIG_ISA_DMA_API=y
 
 #
@@ -225,6 +242,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +254,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +264,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +357,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -368,6 +384,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -386,12 +403,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -430,6 +450,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -456,6 +477,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -494,16 +516,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -515,13 +535,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -538,22 +569,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -568,7 +593,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -616,6 +640,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -626,14 +651,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -654,8 +677,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -665,6 +690,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -672,6 +698,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -679,9 +706,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -694,19 +724,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -719,3 +760,4 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index 07c8d4ce175..17615750b49 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:50:44 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:04:12 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -111,13 +117,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 CONFIG_EBONY=y
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440GP=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -192,7 +209,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
@@ -210,13 +226,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -444,12 +464,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -467,12 +489,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -507,7 +532,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -517,12 +541,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -535,6 +559,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -542,6 +567,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -568,6 +594,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -606,12 +633,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -627,13 +651,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -650,16 +685,14 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -668,13 +701,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -689,7 +720,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -748,6 +778,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -758,14 +789,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -786,8 +815,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -798,6 +829,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -805,6 +837,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -812,9 +845,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -827,17 +863,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -849,50 +898,84 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index c8804ec01ea..7bc4082a1c9 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Mon Dec 24 11:17:43 2007
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:06:51 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,7 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -67,23 +72,22 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -91,11 +95,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -103,10 +109,26 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -117,6 +139,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -130,23 +153,28 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 CONFIG_KATMAI=y
 # CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440SPe=y
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -157,7 +185,6 @@ CONFIG_440SPe=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -173,13 +200,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -190,17 +221,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="katmai.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -208,6 +241,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -218,6 +253,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -227,17 +263,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -275,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -300,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -325,6 +356,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -346,15 +379,19 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -371,6 +408,10 @@ CONFIG_MISC_DEVICES=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -378,14 +419,12 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -414,6 +453,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -421,12 +462,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -438,6 +479,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -445,12 +488,12 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -472,7 +515,9 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -509,15 +554,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -529,13 +573,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -552,34 +607,27 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -594,14 +642,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -643,8 +688,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -652,14 +700,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -675,14 +721,15 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -692,10 +739,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -703,6 +747,7 @@ CONFIG_INSTRUMENTATION=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -710,10 +755,14 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -724,19 +773,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -747,44 +807,85 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index dec18ca7351..0479648a914 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:53:10 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:09:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -111,13 +117,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 CONFIG_RAINIER=y
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440GRX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -191,7 +208,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
@@ -209,14 +225,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -445,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +490,10 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -475,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -492,7 +517,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -502,12 +526,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -520,6 +544,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -527,6 +552,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -553,6 +579,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -591,12 +618,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -612,13 +636,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -635,16 +670,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -653,13 +686,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -674,7 +705,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -733,6 +763,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -743,14 +774,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -771,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -783,6 +814,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -790,6 +822,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -797,9 +830,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -812,19 +848,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -849,51 +896,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 9ce5cbc2a4e..0ed2de05f4e 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Mon May  5 13:43:02 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:12:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -116,15 +118,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -135,6 +144,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -154,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -169,6 +177,7 @@ CONFIG_SAM440EP=y
 # CONFIG_WARP is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -220,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -228,6 +238,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -237,6 +248,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -263,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -353,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
@@ -379,6 +389,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -422,6 +433,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -481,18 +493,22 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,7 +547,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
@@ -607,12 +622,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -661,40 +678,60 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -703,10 +740,13 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -718,6 +758,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -730,6 +771,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -755,7 +797,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 CONFIG_FB_BACKLIGHT=y
@@ -795,10 +836,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -821,10 +865,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -859,11 +899,13 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -881,6 +923,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -900,6 +943,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -939,6 +983,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -976,6 +1021,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_M41T80_WDT=y
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -996,6 +1042,7 @@ CONFIG_RTC_DRV_M41T80_WDT=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -1074,6 +1121,7 @@ CONFIG_AFFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1151,6 +1199,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1177,7 +1226,15 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index dd5d6303c39..e40b1023265 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:53:46 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:15:13 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -79,6 +83,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -112,13 +118,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -129,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 CONFIG_SEQUOIA=y
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EPX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -192,7 +209,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -210,14 +226,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -226,6 +246,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -236,6 +258,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -245,17 +268,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -293,8 +312,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -344,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -356,6 +375,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -446,12 +466,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -469,12 +491,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,7 +534,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -519,12 +543,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -537,6 +561,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -544,6 +569,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -570,6 +596,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -608,12 +635,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -629,13 +653,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -652,16 +687,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -670,13 +703,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -691,7 +722,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -750,6 +780,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -760,14 +791,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -788,8 +817,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -800,6 +831,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -807,6 +839,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -814,9 +847,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -829,19 +865,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -866,51 +913,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index e53c92655bd..5075873bdb1 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:40:44 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:17:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -111,13 +117,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 CONFIG_TAISHAN=y
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440GX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -191,7 +208,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -209,14 +225,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -354,6 +373,8 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -444,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -467,6 +490,10 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -474,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,7 +535,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -519,12 +544,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -537,6 +562,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -544,6 +570,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -570,6 +597,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -608,12 +636,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -629,13 +654,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -652,16 +688,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -670,13 +704,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -691,7 +723,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -740,6 +771,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -750,14 +782,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -778,8 +808,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -789,6 +821,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -796,6 +829,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -803,9 +837,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -818,19 +855,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -842,51 +890,85 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 9c41f66b5a7..663ec512b33 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  2 15:36:41 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:20:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,9 +29,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -115,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -135,6 +143,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -154,13 +163,12 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
@@ -221,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -239,6 +248,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -265,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -446,7 +452,9 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -471,12 +479,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,7 +513,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -532,7 +541,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -547,6 +555,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -619,12 +628,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -670,39 +681,59 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -711,10 +742,13 @@ CONFIG_I2C_DEBUG_ALGO=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -726,6 +760,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -799,6 +834,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 CONFIG_FB_XILINX=y
 # CONFIG_FB_VIRTUAL is not set
@@ -831,10 +867,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -910,6 +942,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -920,17 +953,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=y
@@ -994,6 +1026,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1018,7 +1051,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1071,6 +1113,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 2313c3e8ef6..d9375a969c6 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:54:43 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:23:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -111,13 +117,22 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,23 +158,24 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 CONFIG_WARP=y
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -191,7 +208,6 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -209,14 +225,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="ip=on"
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -224,10 +244,13 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -237,17 +260,13 @@ CONFIG_ZONE_DMA=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,8 +310,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -318,6 +335,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
@@ -368,6 +386,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -446,6 +465,7 @@ CONFIG_MTD_NAND_IDS=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -460,6 +480,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -504,11 +525,11 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -538,6 +559,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -571,6 +593,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -608,44 +631,49 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_IBM_IIC is not set
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -658,6 +686,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -698,6 +727,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -709,13 +739,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -730,10 +771,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -750,11 +787,15 @@ CONFIG_USB=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -770,6 +811,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -790,6 +832,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -825,6 +868,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
@@ -836,19 +880,19 @@ CONFIG_MMC=m
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -863,7 +907,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -924,6 +967,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -934,14 +978,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1001,8 +1043,10 @@ CONFIG_NLS_UTF8=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1013,6 +1057,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1020,6 +1065,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1027,9 +1073,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1041,17 +1090,30 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1063,48 +1125,82 @@ CONFIG_BDI_SWITCH=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 60bb4d106c8..5e6780a088c 100644
--- a/arch/powerpc/configs/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Tue May  6 02:21:00 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:01 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,6 +32,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -50,6 +54,9 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -92,6 +99,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -109,24 +117,33 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,38 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 CONFIG_ASP834x=y
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -192,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -202,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -212,13 +241,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -226,10 +259,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -239,6 +275,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -248,15 +285,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -300,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -363,6 +394,7 @@ CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -434,9 +466,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -453,12 +487,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -476,12 +512,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +547,8 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -525,7 +566,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -535,14 +575,14 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -551,6 +591,7 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -606,6 +647,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -625,16 +667,17 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -643,16 +686,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -660,50 +701,70 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -713,6 +774,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -757,6 +819,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -764,7 +827,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -786,13 +851,25 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -810,10 +887,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -831,16 +904,21 @@ CONFIG_USB=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -851,6 +929,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -865,7 +944,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -878,7 +956,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -894,18 +971,16 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
@@ -933,6 +1008,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -953,11 +1029,8 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -977,7 +1050,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1036,6 +1108,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1046,15 +1119,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1126,8 +1197,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1146,6 +1219,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1154,7 +1228,18 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1164,51 +1249,86 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 5428f9f5ed8..2028337868b 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:21 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:17 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC831x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -260,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -452,9 +478,11 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -471,12 +499,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -553,7 +583,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -570,12 +603,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -602,6 +638,8 @@ CONFIG_CICADA_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -638,7 +676,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -652,9 +689,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -752,11 +790,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -768,43 +809,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -828,11 +896,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -841,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -886,6 +959,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -893,7 +967,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -915,8 +991,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -949,10 +1027,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -986,6 +1060,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1009,6 +1084,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1037,6 +1113,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1045,7 +1122,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1058,7 +1134,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1085,7 +1160,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1103,6 +1178,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1138,10 +1214,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1240,6 +1319,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1250,14 +1330,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1297,6 +1376,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1323,6 +1403,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1340,19 +1422,32 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1406,6 +1501,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1438,5 +1537,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 9bc3a03ae26..dd80eb0a87a 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:21 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC831x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -260,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -452,9 +478,11 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -471,12 +499,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -554,7 +584,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -631,12 +664,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -663,6 +699,8 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -699,7 +737,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -713,9 +750,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -813,11 +851,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -829,43 +870,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -889,11 +957,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -902,6 +974,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -947,6 +1020,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -954,7 +1028,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -976,8 +1052,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1010,10 +1088,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1047,6 +1121,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1070,6 +1145,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1098,6 +1174,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1106,7 +1183,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1119,7 +1195,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1146,7 +1221,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1164,6 +1239,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1199,10 +1275,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1301,6 +1380,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1311,14 +1391,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1358,6 +1437,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1384,6 +1464,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1401,19 +1483,32 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1467,6 +1562,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1499,5 +1598,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 1eca26f3659..bdf50c8a17e 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:22 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 CONFIG_MPC832x_MDS=y
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC832x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -196,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,6 +231,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +244,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +252,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,10 +260,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +291,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -365,6 +391,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -380,12 +407,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -462,7 +491,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -470,12 +502,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +537,8 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -519,7 +556,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -534,12 +570,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -628,12 +665,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -645,42 +685,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -689,10 +756,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -702,6 +772,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -746,6 +817,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -753,7 +825,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -770,8 +844,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -803,10 +879,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -821,6 +893,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -859,6 +935,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -947,6 +1024,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -957,14 +1035,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -994,6 +1071,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1002,6 +1080,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1027,8 +1106,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1082,6 +1171,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1114,6 +1207,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index de95d327463..4eef8c95480 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:24 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:19 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 CONFIG_MPC832x_RDB=y
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC832x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -196,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,6 +231,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +244,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +252,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,10 +260,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +291,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -362,9 +388,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -381,12 +409,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -463,7 +493,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -471,12 +504,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -503,6 +539,8 @@ CONFIG_ICPLUS_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -520,10 +558,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -538,12 +574,13 @@ CONFIG_E1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-CONFIG_UGETH_NAPI=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -641,12 +678,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -660,43 +700,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -719,11 +786,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -732,6 +803,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -777,6 +849,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -784,7 +857,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -806,8 +881,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -840,10 +917,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -877,6 +950,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -928,6 +1002,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -936,7 +1011,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -949,7 +1023,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1063,6 +1136,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1073,14 +1147,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1154,6 +1227,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1162,6 +1236,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
@@ -1187,8 +1262,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1242,6 +1327,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1274,6 +1363,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index b47fc918570..8d651393185 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:25 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:20 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -439,9 +465,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -458,18 +486,17 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -545,7 +572,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -623,12 +653,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -659,7 +692,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -673,9 +705,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -753,11 +786,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -769,43 +805,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -828,10 +891,13 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -839,7 +905,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -861,8 +929,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -895,10 +965,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -917,6 +983,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -960,6 +1027,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -968,7 +1036,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -981,7 +1048,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1035,10 +1101,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1130,6 +1199,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1140,14 +1210,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1226,6 +1295,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1251,8 +1321,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1306,6 +1386,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1338,5 +1422,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index fdac4845bad..a8afa39d6f7 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -439,9 +465,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -458,12 +486,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -540,7 +570,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -548,12 +581,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -584,7 +620,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -598,9 +633,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -678,11 +714,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -694,43 +733,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -753,10 +819,13 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -764,7 +833,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -786,8 +857,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -820,10 +893,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -842,6 +911,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -885,6 +955,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -893,7 +964,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -906,7 +976,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -959,10 +1028,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1054,6 +1126,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1064,14 +1137,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1150,6 +1222,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1175,8 +1248,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1230,6 +1313,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1262,5 +1349,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index c82e96e984f..24c320a3667 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 CONFIG_MPC834x_MDS=y
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +389,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -378,12 +405,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -401,12 +430,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -433,6 +465,8 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -468,7 +502,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -482,9 +515,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -572,11 +606,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -588,42 +625,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -632,10 +696,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -645,6 +712,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -689,6 +757,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -696,7 +765,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -713,8 +784,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -746,10 +819,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -764,6 +833,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -802,6 +875,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -890,6 +964,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -900,14 +975,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -943,6 +1017,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -968,8 +1043,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1023,6 +1108,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1055,5 +1144,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 20fd9f58cf4..e029e9e1462 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:27 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:22 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,36 +161,48 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 CONFIG_MPC836x_MDS=y
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +389,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -378,12 +405,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -460,7 +489,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -468,12 +500,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -500,6 +535,8 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -517,7 +554,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -532,12 +568,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -626,12 +663,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -643,42 +683,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -687,10 +754,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -700,6 +770,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -744,6 +815,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -751,7 +823,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -768,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -801,10 +877,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -819,6 +891,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -857,6 +933,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -945,6 +1022,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -955,14 +1033,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -992,6 +1069,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1000,6 +1078,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1025,8 +1104,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1080,6 +1169,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1112,6 +1205,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index d2c435f0da4..7d674be702f 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Mon May 19 21:12:32 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:24 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -52,6 +54,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -89,12 +94,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,16 +162,18 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
@@ -170,17 +184,26 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -207,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,12 +259,15 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
 CONFIG_FSL_LBC=y
 CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -263,10 +292,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -359,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -449,9 +476,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -467,12 +496,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -490,12 +521,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -526,7 +560,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -541,12 +574,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-CONFIG_UGETH_NAPI=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -602,6 +636,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -625,12 +660,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -643,43 +681,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -703,26 +768,33 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -730,7 +802,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -747,9 +821,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -799,6 +874,9 @@ CONFIG_FB_MACMODES=y
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
 # CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
@@ -821,6 +899,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_FSL_DIU is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -846,10 +925,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -941,6 +1016,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -951,14 +1027,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -998,6 +1073,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1025,12 +1101,22 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_PPC_EARLY_DEBUG_LPAR is not set
 # CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y
 # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
 # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
 # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
@@ -1091,6 +1177,10 @@ CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1123,6 +1213,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index 0f94d9f56be..de472022aa8 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:28 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:23 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +93,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,37 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 CONFIG_MPC837x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -206,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -218,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,15 +259,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -360,19 +390,30 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -415,24 +456,128 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -452,16 +597,56 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -470,8 +655,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -515,12 +703,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -531,40 +721,90 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -573,10 +813,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -586,8 +829,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -609,13 +854,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -626,6 +874,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -633,7 +882,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Sonics Silicon Backplane
@@ -644,8 +901,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -666,6 +925,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -675,10 +936,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -686,13 +943,17 @@ CONFIG_HID=y
 # CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -700,6 +961,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -769,6 +1031,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -779,14 +1042,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -826,6 +1088,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -849,8 +1112,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -904,6 +1177,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -935,5 +1212,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 0d448556f53..e8d2d691d26 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Tue Jun 10 09:17:12 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:25 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +93,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,37 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 CONFIG_MPC837x_RDB=y
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -206,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -218,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,15 +259,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -355,10 +385,16 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -366,9 +402,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -411,14 +452,106 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -430,15 +563,27 @@ CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -458,16 +603,44 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -485,8 +658,11 @@ CONFIG_GFAR_NAPI=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -530,12 +706,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -546,41 +724,91 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -589,10 +817,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -602,8 +833,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -625,13 +858,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -642,6 +878,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -649,7 +886,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # USB-based Watchdog Cards
@@ -665,8 +910,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -688,6 +935,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -697,10 +946,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -716,7 +961,7 @@ CONFIG_USB_HID=y
 # CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
@@ -731,6 +976,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -743,6 +989,8 @@ CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
@@ -768,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -781,7 +1028,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -803,6 +1049,7 @@ CONFIG_USB_MON=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -872,6 +1119,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -882,14 +1130,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -929,6 +1176,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -952,8 +1200,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1011,6 +1269,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1042,5 +1304,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 1752918be2c..9245a67da20 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:30 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:27 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -110,10 +115,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,12 +135,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -148,37 +160,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 CONFIG_SBC834x=y
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -204,6 +228,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -216,6 +241,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +249,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -230,15 +257,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -254,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -358,19 +388,30 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -383,15 +424,27 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -411,16 +464,44 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -429,6 +510,8 @@ CONFIG_GIANFAR=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NETCONSOLE is not set
@@ -474,12 +557,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -490,40 +575,90 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -532,10 +667,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -545,8 +683,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -568,13 +708,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -585,6 +728,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -592,7 +736,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Sonics Silicon Backplane
@@ -603,8 +755,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -625,6 +779,8 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -634,10 +790,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -648,6 +800,7 @@ CONFIG_HID=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -710,6 +863,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -720,14 +874,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -740,6 +893,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
@@ -751,6 +905,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -774,8 +929,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -829,6 +994,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index b82bb042308..8bb89f26a20 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:30 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:28 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -85,7 +88,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -110,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,6 +132,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,8 +151,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -152,11 +159,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -173,7 +182,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -213,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -220,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -229,6 +239,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -250,10 +261,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -427,6 +434,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -440,12 +448,12 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -463,11 +471,8 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -480,7 +485,6 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -504,6 +508,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -516,9 +521,7 @@ CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -606,6 +609,23 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -622,6 +642,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -633,8 +654,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -664,10 +687,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -681,6 +700,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -759,6 +782,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -768,12 +792,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -809,6 +832,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -833,6 +857,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -851,17 +877,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -915,6 +953,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -946,6 +988,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
index f1e2931de5d..6b516bea6e7 100644
--- a/arch/powerpc/configs/mpc8536_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  2 01:34:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:18:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -119,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -205,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -228,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -235,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -246,6 +253,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -272,10 +280,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -401,6 +405,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -427,12 +433,14 @@ CONFIG_BLK_DEV_RAM_SIZE=524288
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -512,6 +520,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -588,7 +597,6 @@ CONFIG_SATA_SIL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -632,7 +640,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -648,9 +655,9 @@ CONFIG_SKY2=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -727,12 +734,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -766,7 +775,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -776,43 +785,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -821,6 +851,8 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -836,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -879,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -925,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -992,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1012,19 +1040,15 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1086,39 +1110,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1150,6 +1147,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1201,6 +1199,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1209,7 +1208,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1222,7 +1220,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1310,6 +1307,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1387,6 +1385,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1399,17 +1398,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1488,6 +1486,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1513,6 +1512,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1531,19 +1532,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -1561,13 +1572,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1601,6 +1613,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1633,5 +1649,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index f33fd516fd5..1ea181f826f 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:31 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:30 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +115,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +135,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +154,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +162,13 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -192,7 +200,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -231,6 +241,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -252,10 +263,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -367,6 +374,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -384,7 +392,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -416,9 +423,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -504,6 +509,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -520,6 +527,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -531,8 +539,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -562,10 +572,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -579,6 +585,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -655,6 +665,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -664,12 +675,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -705,6 +715,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -729,6 +740,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -746,16 +759,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -808,6 +834,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -839,5 +869,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index a0583e5119f..1aecdeab984 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:32 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:20:43 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +172,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 CONFIG_MPC85xx_DS=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -202,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -244,6 +254,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -270,10 +281,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,6 +406,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -425,12 +434,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -510,6 +521,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -577,12 +589,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -626,7 +641,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -640,9 +654,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -719,12 +733,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -758,7 +774,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -768,43 +784,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -813,10 +850,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -828,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -871,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -917,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -984,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1006,19 +1042,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1080,39 +1112,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1144,6 +1149,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1195,6 +1201,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1203,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1216,7 +1222,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1270,6 +1275,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1303,6 +1309,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1379,6 +1386,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1391,17 +1399,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1480,6 +1487,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1505,6 +1513,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1523,17 +1533,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1550,13 +1572,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1590,6 +1613,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1622,5 +1649,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index e19592b4204..06e26d906f6 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:33 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:32 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +136,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +155,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +163,13 @@ CONFIG_MPC85xx=y
 CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -177,7 +186,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -217,6 +225,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -235,6 +245,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +272,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +370,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -381,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -404,12 +414,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -456,10 +469,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -473,9 +484,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -582,6 +593,24 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -602,6 +631,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -613,8 +643,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -646,10 +678,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -664,6 +692,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -741,6 +773,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -750,12 +783,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -791,6 +823,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -815,6 +848,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -832,17 +867,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -895,6 +942,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -927,6 +978,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 28004e93aee..dc27c74955f 100644
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:34 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:33 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -112,10 +113,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +133,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,8 +158,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -160,11 +166,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 CONFIG_MPC85xx_MDS=y
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -197,7 +205,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -220,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -227,6 +236,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -238,6 +248,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -264,10 +275,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -385,12 +392,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +477,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -475,12 +485,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -524,7 +537,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -538,10 +550,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -648,42 +660,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -692,10 +725,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -749,6 +785,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -756,6 +793,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_BOOKE_WDT is not set
 
 #
@@ -773,8 +811,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -806,10 +846,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -824,6 +860,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -862,6 +902,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -950,6 +991,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -960,14 +1002,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -995,6 +1036,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1003,6 +1045,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1027,6 +1070,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1044,17 +1089,28 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
@@ -1122,6 +1178,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1154,6 +1214,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 164fd9606ee..eda45bb8a13 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:35 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:21:42 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +172,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 CONFIG_MPC85xx_DS=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -202,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -244,6 +254,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -270,10 +281,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,6 +406,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -425,12 +434,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -510,6 +521,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -577,12 +589,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -626,7 +641,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -640,9 +654,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -719,12 +733,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -758,7 +774,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -768,43 +784,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -813,10 +850,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -828,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -871,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -917,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -984,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1006,19 +1042,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1080,39 +1112,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1144,6 +1149,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1195,6 +1201,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1203,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1216,7 +1222,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1270,6 +1275,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1368,6 +1374,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1380,17 +1387,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1469,6 +1475,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1494,6 +1501,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1512,17 +1521,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1539,13 +1560,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1579,6 +1601,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1611,5 +1637,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index b09f0032a10..97f3c4fe440 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:36 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:34 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +115,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +135,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +154,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +162,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -192,7 +200,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -233,6 +243,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +270,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -379,20 +386,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 # CONFIG_BLK_DEV_IDEDISK is not set
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -405,7 +414,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -423,10 +431,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -444,8 +450,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -461,12 +465,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,10 +516,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -526,9 +531,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -634,6 +639,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -654,6 +661,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -665,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -698,10 +708,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -716,6 +722,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -793,6 +803,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -802,12 +813,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -843,6 +853,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -867,6 +878,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -884,16 +897,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -946,6 +972,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -978,5 +1008,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 24f7f44b482..41cedc4b63f 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:37 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -112,10 +113,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +133,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +152,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +160,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 CONFIG_SBC8548=y
@@ -213,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -220,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -231,6 +241,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -256,10 +267,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -374,12 +381,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -397,12 +406,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -446,7 +458,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -460,9 +471,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -568,6 +579,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -588,6 +601,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -599,8 +613,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -632,10 +648,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -706,6 +718,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -715,12 +728,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -744,6 +756,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -767,7 +780,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -819,6 +841,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -851,5 +877,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 655518dcd73..daef36f41b4 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:38 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:36 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,10 +114,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -127,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -155,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -214,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -221,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -230,6 +240,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -251,10 +262,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -366,6 +373,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -383,7 +391,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -415,9 +422,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -501,6 +506,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -517,6 +524,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -528,8 +536,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -559,10 +569,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -576,6 +582,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -679,6 +689,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -688,12 +699,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -729,6 +739,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -753,6 +764,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -769,16 +782,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -842,6 +868,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -873,5 +903,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 7804ca1ecc9..2b05d43f8f7 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:38 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -115,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -134,6 +142,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -152,8 +161,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -162,11 +169,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -183,7 +192,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -223,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -230,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -241,6 +251,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -267,10 +278,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -426,6 +433,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
@@ -452,15 +460,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -480,7 +489,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 
 #
@@ -493,10 +501,8 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -514,8 +520,6 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -594,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -601,12 +606,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -652,7 +660,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -666,9 +673,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -731,6 +738,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -741,7 +749,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -757,6 +767,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -805,44 +816,68 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -850,10 +885,32 @@ CONFIG_I2C_CHARDEV=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -907,6 +964,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -918,8 +976,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -958,20 +1018,8 @@ CONFIG_DRM=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -986,6 +1034,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -1070,6 +1122,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1080,13 +1133,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1150,6 +1202,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1175,6 +1228,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1193,18 +1248,29 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1258,6 +1324,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1290,6 +1360,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index e0b5559e84a..1b2d5d57791 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:39 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +113,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +133,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +152,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +160,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -214,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -221,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,6 +242,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -255,10 +266,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -449,20 +456,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -475,7 +484,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -493,10 +501,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -514,8 +520,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -531,12 +535,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -598,7 +605,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -612,9 +618,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -721,41 +727,62 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -764,10 +791,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -821,6 +851,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -832,8 +863,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -865,10 +898,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -883,6 +912,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -971,6 +1004,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -980,12 +1014,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1021,6 +1054,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1048,7 +1082,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1100,6 +1143,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1132,5 +1179,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 6f9067b49e0..da841a09755 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:40 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 CONFIG_TQM8541=y
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -894,6 +945,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index b3b770be3cc..ca1234d2685 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Thu Jun 26 14:40:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:40 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -116,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -130,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -154,8 +161,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -164,6 +169,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
@@ -187,7 +193,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_CPM2 is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -203,7 +208,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -226,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -233,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -244,7 +251,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
-CONFIG_FSL_LBC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -273,10 +280,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -455,7 +458,6 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_NAND_FSL_ELBC is not set
-CONFIG_MTD_NAND_FSL_UPM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -490,20 +492,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 # CONFIG_BLK_DEV_IDEDISK is not set
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -516,7 +520,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -534,10 +537,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -555,8 +556,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -572,12 +571,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -620,10 +622,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -637,9 +637,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -744,42 +744,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -788,10 +809,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -845,6 +869,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -856,8 +881,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -889,10 +916,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -907,6 +930,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -945,6 +972,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1031,9 +1059,11 @@ CONFIG_TMPFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1043,12 +1073,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1084,6 +1113,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1108,6 +1138,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1125,17 +1157,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1189,6 +1233,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1221,5 +1269,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 03120b5b52f..dcf9cfe28b5 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:41 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:42 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 CONFIG_TQM8555=y
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -894,6 +945,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 3113257edf5..8d676629cdb 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:42 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:43 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 CONFIG_TQM8560=y
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -894,6 +945,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 6740f2a3aa3..63cd51fbb4b 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:08 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:00 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -109,10 +110,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -122,6 +129,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -140,8 +148,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -159,6 +165,7 @@ CONFIG_PPC_ADDER875=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -177,7 +184,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -218,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -257,10 +265,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -443,7 +447,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -547,6 +550,7 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -587,6 +591,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -602,8 +608,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -633,10 +641,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -706,6 +710,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -716,13 +721,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -761,6 +765,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -785,6 +790,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -800,16 +807,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -822,6 +841,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index dc599c7e97d..c16521ffb47 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Thu May 15 11:00:14 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:02 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -97,7 +98,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -124,11 +124,17 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -145,6 +151,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -164,19 +171,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
@@ -253,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -260,6 +267,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_SECCOMP=y
@@ -301,10 +309,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -318,6 +322,7 @@ CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -349,7 +354,7 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -472,6 +477,7 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -495,6 +501,7 @@ CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
 
 #
 # Bridge: Netfilter Configuration
@@ -507,6 +514,7 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -535,8 +543,10 @@ CONFIG_ATM_LANE=m
 # CONFIG_ATM_MPOA is not set
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -556,7 +566,6 @@ CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -601,7 +610,6 @@ CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
 CONFIG_BT_HIDP=m
 
 #
@@ -609,6 +617,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -625,6 +634,7 @@ CONFIG_FIB_RULES=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -645,6 +655,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -749,6 +761,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -844,6 +857,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -851,12 +865,15 @@ CONFIG_SCSI_LPFC=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -900,7 +917,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -916,6 +932,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -940,112 +957,13 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=m
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_ISDN=m
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-# CONFIG_ISDN_PPP_BSDCOMP is not set
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DRV_LOOP=m
-# CONFIG_ISDN_DIVERSION is not set
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-# CONFIG_HISAX_HFC4S8S is not set
-CONFIG_HISAX_FRITZ_PCIPNP=m
-CONFIG_HISAX_HDLC=y
-
-#
-# Active cards
-#
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-# CONFIG_ISDN_DRV_GIGASET is not set
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
+# CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
 #
@@ -1092,6 +1010,7 @@ CONFIG_INPUT_UINPUT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1145,44 +1064,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+CONFIG_I2C_MV64XXX=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=m
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 CONFIG_SENSORS_PCF8591=m
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1191,10 +1131,13 @@ CONFIG_SENSORS_PCF8591=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=m
 CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
@@ -1255,6 +1198,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_MV64X60_WDT is not set
 
 #
@@ -1278,8 +1222,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1290,6 +1236,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1316,10 +1263,6 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_HID=m
@@ -1339,6 +1282,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1363,10 +1307,15 @@ CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_R8A66597_HCD is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1388,6 +1337,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1396,7 +1346,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1405,7 +1354,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1443,6 +1391,7 @@ CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
@@ -1464,7 +1413,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
@@ -1481,6 +1429,7 @@ CONFIG_USB_LED=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
 # CONFIG_USB_CXACRU is not set
@@ -1601,6 +1550,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1611,8 +1561,8 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -1620,7 +1570,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1705,6 +1654,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1732,6 +1682,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1750,6 +1702,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1758,11 +1711,22 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
@@ -1776,7 +1740,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_SECURITY_SELINUX=y
@@ -1835,6 +1798,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 05360d4ef1b..2e0ef8c1822 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:00:44 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:12:40 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -117,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,19 +164,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
@@ -201,7 +207,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -268,10 +276,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -398,7 +402,9 @@ CONFIG_NF_NAT_SIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -427,12 +433,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -440,6 +448,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
@@ -454,7 +463,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -472,10 +480,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -493,8 +499,6 @@ CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -588,6 +592,7 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -595,12 +600,15 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -660,14 +668,12 @@ CONFIG_8139TOO=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=y
 # CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -683,6 +689,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -773,6 +780,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -798,12 +806,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -848,46 +858,71 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_ISA is not set
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -896,10 +931,13 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -911,8 +949,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -997,10 +1037,13 @@ CONFIG_FB_3DFX=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1030,10 +1073,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1062,6 +1101,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1087,6 +1127,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1108,6 +1149,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1116,7 +1158,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1129,7 +1170,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1146,6 +1186,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1226,6 +1267,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1310,6 +1352,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1336,6 +1379,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1354,20 +1399,32 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1424,6 +1481,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index ba2a463b930..ef0c6e80050 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:09 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -81,7 +86,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -89,6 +93,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -105,10 +110,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -118,6 +129,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -136,33 +148,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 # CONFIG_MPC8272_ADS is not set
 # CONFIG_PQ2FADS is not set
 CONFIG_EP8248E=y
 # CONFIG_PQ2ADS is not set
 CONFIG_8260=y
 CONFIG_8272=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -197,6 +219,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -204,6 +227,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -211,13 +235,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -233,10 +266,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -410,11 +439,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -434,16 +465,23 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -457,14 +495,25 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
+#
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -482,21 +531,59 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FCC=y
 # CONFIG_FS_ENET_MDIO_FCC is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -505,6 +592,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NETPOLL is not set
@@ -541,6 +629,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -549,21 +638,44 @@ CONFIG_SERIAL_CPM_SCC1=y
 CONFIG_SERIAL_CPM_SCC4=y
 # CONFIG_SERIAL_CPM_SMC1 is not set
 # CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -575,8 +687,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -597,6 +711,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -606,16 +722,13 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
@@ -675,6 +788,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -684,8 +798,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -763,6 +877,7 @@ CONFIG_NLS_UTF8=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -804,19 +919,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -824,6 +951,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -864,6 +992,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -894,6 +1026,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index ac72b48542d..480225be2f3 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:09 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:04 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -108,10 +109,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -121,6 +128,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,8 +147,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -158,6 +164,7 @@ CONFIG_PPC_EP88XC=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -176,7 +183,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -193,7 +199,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -217,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -256,10 +264,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -442,7 +446,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -544,10 +547,13 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -559,8 +565,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -590,10 +598,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -662,6 +666,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -672,13 +677,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -717,6 +721,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -741,6 +746,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -756,16 +763,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -777,6 +796,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 0ccc6e493dc..cfa5d053ee5 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Mon Jun 16 21:08:31 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:15:06 2008
 #
 CONFIG_PPC64=y
 
@@ -13,6 +13,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+# CONFIG_VSX is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -30,6 +31,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -94,9 +96,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -121,10 +122,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -140,6 +147,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -160,13 +168,8 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
@@ -224,7 +227,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -256,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -265,6 +269,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
@@ -290,10 +295,6 @@ CONFIG_PCI_MSI=y
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -307,6 +308,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -422,6 +424,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -449,12 +453,14 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -462,6 +468,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -492,10 +499,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +521,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -592,6 +595,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -675,29 +679,21 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB_PMU=y
@@ -712,7 +708,6 @@ CONFIG_WINDFARM_PM112=y
 CONFIG_WINDFARM_PM121=y
 # CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -720,7 +715,23 @@ CONFIG_BONDING=m
 CONFIG_TUN=m
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -740,10 +751,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -758,6 +767,7 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -855,6 +865,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -869,12 +880,14 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -909,44 +922,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -955,10 +993,13 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -970,8 +1011,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1050,10 +1093,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1077,15 +1123,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1103,19 +1141,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1177,20 +1209,9 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1198,30 +1219,11 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1256,6 +1258,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1306,6 +1309,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1314,7 +1318,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1323,7 +1326,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1383,7 +1385,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1497,6 +1498,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1519,7 +1521,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1603,6 +1604,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1629,8 +1631,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1644,22 +1648,37 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -1718,6 +1737,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 63f0bdb6340..2c3f13577f4 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:01:36 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:15:49 2008
 #
 CONFIG_PPC64=y
 
@@ -31,6 +31,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -94,9 +95,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -120,10 +120,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -159,9 +166,6 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 CONFIG_LPARCFG=y
 CONFIG_PPC_ISERIES=y
@@ -173,8 +177,6 @@ CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -211,7 +213,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -241,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -250,6 +253,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -274,10 +278,6 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,6 +291,7 @@ CONFIG_XFRM_USER=m
 CONFIG_XFRM_SUB_POLICY=y
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -480,7 +481,9 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -504,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -588,6 +593,7 @@ CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -612,12 +618,15 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -655,6 +664,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
@@ -662,10 +672,8 @@ CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -680,6 +688,7 @@ CONFIG_E1000=m
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -767,6 +776,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -789,6 +799,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_ISERIES=y
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -803,10 +814,13 @@ CONFIG_MAX_RAW_DEVS=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -818,8 +832,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -858,10 +874,6 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -910,7 +922,6 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
 CONFIG_GFS2_FS_LOCKING_DLM=m
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -967,6 +978,7 @@ CONFIG_CONFIGFS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -989,7 +1001,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1059,6 +1070,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1089,8 +1101,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1104,22 +1118,37 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1178,6 +1207,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 48434c2c762..6fc4c212775 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:10 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:05 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -158,25 +165,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 CONFIG_LINKSTATION=y
 # CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
@@ -207,7 +214,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -230,6 +237,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -237,6 +245,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -273,10 +282,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -461,6 +466,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 CONFIG_IEEE80211_DEBUG=y
@@ -480,7 +486,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -592,12 +600,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -676,6 +686,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -743,12 +754,15 @@ CONFIG_PATA_SIL680=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -785,14 +799,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -803,6 +815,7 @@ CONFIG_R8169=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -889,12 +902,14 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -934,43 +949,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -979,10 +1015,13 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -1036,6 +1075,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1047,8 +1087,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1086,10 +1128,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -1121,6 +1159,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1172,6 +1211,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1180,7 +1220,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1190,7 +1229,6 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1237,7 +1275,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1291,6 +1328,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1392,6 +1430,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1402,11 +1441,11 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1414,7 +1453,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1482,6 +1520,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1510,6 +1549,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1527,17 +1568,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1556,6 +1609,7 @@ CONFIG_CRYPTO=y
 #
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1594,6 +1648,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1627,5 +1685,6 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 7a166a39d92..1a3b6423222 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:26 2007
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:18:58 2008
 #
 CONFIG_PPC64=y
 
@@ -27,7 +27,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -67,16 +72,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,10 +112,28 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -114,6 +143,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -128,29 +158,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
 # CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -166,7 +193,6 @@ CONFIG_PPC_970_NAP=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -181,16 +207,19 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -207,18 +236,21 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 # CONFIG_PPC_HAS_HASH_64K is not set
 # CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -237,11 +269,10 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
-
-#
-# Networking
-#
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_NET=y
 
 #
@@ -254,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -284,8 +316,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -308,7 +338,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -334,12 +366,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -354,24 +389,30 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -381,14 +422,13 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -399,10 +439,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -419,10 +457,7 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -483,6 +518,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 CONFIG_SCSI_IPR=y
@@ -496,9 +532,13 @@ CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 CONFIG_ATA_NONSTANDARD=y
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -508,7 +548,6 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -537,6 +576,7 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -551,27 +591,47 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -587,7 +647,6 @@ CONFIG_MII=y
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
@@ -598,18 +657,21 @@ CONFIG_AMD8111_ETH=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -617,12 +679,12 @@ CONFIG_E1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -632,9 +694,10 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -642,6 +705,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -657,7 +721,6 @@ CONFIG_USB_PEGASUS=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -702,10 +765,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -742,16 +808,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -759,32 +823,47 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -793,15 +872,14 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -813,13 +891,25 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -842,10 +932,6 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -865,6 +951,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -873,15 +960,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -896,6 +986,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -912,20 +1003,15 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -943,6 +1029,7 @@ CONFIG_USB_SERIAL_CYPRESS_M8=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -962,9 +1049,11 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -974,7 +1063,6 @@ CONFIG_USB_SERIAL_TI=m
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
 
 #
 # USB Miscellaneous drivers
@@ -982,7 +1070,6 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -999,24 +1086,16 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1037,12 +1116,10 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1088,8 +1165,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1097,16 +1177,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1177,14 +1255,15 @@ CONFIG_NLS_DEFAULT="utf-8"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1194,7 +1273,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1202,6 +1281,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1209,34 +1289,59 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -1249,44 +1354,84 @@ CONFIG_BOOTX_TEXT=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 066c583c1f8..ab5199f26a2 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:11 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:06 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -88,7 +89,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -112,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +132,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,25 +152,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
 CONFIG_MPC7448HPC2=y
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_TSI108_BRIDGE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -192,7 +199,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -256,10 +265,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -374,12 +379,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -457,6 +464,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -523,12 +531,15 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -594,7 +605,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -611,6 +621,7 @@ CONFIG_TSI108_ETH=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -716,6 +727,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -736,6 +749,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -747,8 +761,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -780,10 +796,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -798,6 +810,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -875,6 +891,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -884,12 +901,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -929,6 +945,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -954,7 +971,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1007,6 +1033,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 30d7834b7db..7c435c84c87 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:12 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:07 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -81,7 +86,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -89,6 +93,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -106,10 +111,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -119,6 +130,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -137,14 +149,16 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 CONFIG_MPC8272_ADS=y
 # CONFIG_PQ2FADS is not set
 # CONFIG_EP8248E is not set
@@ -152,19 +166,27 @@ CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_8272=y
 CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -181,7 +203,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -199,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -206,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -213,9 +237,11 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -242,10 +268,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -446,9 +468,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -460,6 +484,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -480,13 +505,12 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -510,8 +534,11 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -533,7 +560,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -545,6 +571,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -610,6 +637,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -620,6 +648,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -634,6 +663,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -654,6 +684,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -666,6 +697,8 @@ CONFIG_SERIAL_CPM_SCC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -676,10 +709,28 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -691,8 +742,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -724,10 +777,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -798,6 +847,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -807,8 +857,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -888,6 +938,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -914,6 +965,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -931,19 +984,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -951,6 +1016,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -991,6 +1057,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1021,6 +1091,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 4293c8be06e..916e3df7cc4 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:14 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:16:25 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,12 +33,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -51,6 +54,10 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +95,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +119,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +139,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,40 +164,52 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 CONFIG_MPC832x_MDS=y
 CONFIG_MPC832x_RDB=y
 CONFIG_MPC834x_MDS=y
 CONFIG_MPC834x_ITX=y
 CONFIG_MPC836x_MDS=y
+CONFIG_MPC836x_RDK=y
 CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_SBC834x=y
+CONFIG_ASP834x=y
 CONFIG_PPC_MPC831x=y
 CONFIG_PPC_MPC832x=y
 CONFIG_PPC_MPC834x=y
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -211,6 +237,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -223,6 +250,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -230,6 +258,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -237,15 +266,24 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -261,10 +299,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -412,11 +446,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -434,10 +470,12 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_NAND_FSL_UPM is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -445,14 +483,21 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -460,9 +505,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -505,24 +555,128 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -542,21 +696,60 @@ CONFIG_ICPLUS_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -574,8 +767,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -619,12 +815,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -635,43 +833,95 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -679,10 +929,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -692,8 +963,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -715,13 +988,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -732,6 +1008,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -739,7 +1016,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # USB-based Watchdog Cards
@@ -755,8 +1040,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -778,6 +1065,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -787,10 +1076,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -806,7 +1091,7 @@ CONFIG_USB_HID=y
 # CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
@@ -821,6 +1106,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -833,6 +1119,8 @@ CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
@@ -858,7 +1146,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -871,7 +1158,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -893,6 +1179,7 @@ CONFIG_USB_MON=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -963,6 +1250,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -973,14 +1261,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1014,6 +1301,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+CONFIG_QE_GPIO=y
 
 #
 # Library routines
@@ -1022,6 +1310,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1045,8 +1334,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1061,12 +1360,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1100,6 +1401,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1131,6 +1436,8 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index fa0170504b8..f0a13bebf50 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 09:03:46 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:15:20 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -92,7 +95,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +120,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +165,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +173,13 @@ CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
 CONFIG_MPC85xx_MDS=y
+CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
+CONFIG_TQM8548=y
 CONFIG_TQM8555=y
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
@@ -189,7 +198,6 @@ CONFIG_PPC_I8259=y
 # CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
 
@@ -206,7 +214,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -229,6 +237,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -236,6 +245,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -248,6 +258,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -274,10 +285,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -403,12 +410,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -429,12 +439,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -514,6 +526,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -581,12 +594,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -631,7 +647,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -645,10 +660,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -725,12 +740,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -776,44 +793,68 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -821,10 +862,32 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -836,8 +899,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -879,6 +944,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -925,6 +991,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -992,15 +1059,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1014,19 +1073,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1088,39 +1143,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1152,6 +1180,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1175,6 +1204,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1203,6 +1233,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1211,7 +1242,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1224,7 +1254,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1285,6 +1314,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1318,6 +1348,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1332,6 +1363,7 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1394,6 +1426,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1406,17 +1439,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1487,6 +1519,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1495,6 +1528,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1515,11 +1549,13 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1538,19 +1574,31 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
+CONFIG_VIRQ_DEBUG=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1606,6 +1654,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1638,6 +1690,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index cdf98ae3682..1a9990731eb 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Tue Jul 15 08:31:01 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:10 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -91,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +144,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -159,9 +166,8 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
@@ -207,7 +213,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -230,6 +236,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -237,6 +244,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -278,10 +286,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -391,6 +395,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -503,18 +509,17 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -593,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MESH is not set
 # CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -669,7 +675,6 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -756,12 +761,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -807,44 +814,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -853,6 +885,8 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -869,8 +903,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -945,6 +981,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_FSL_DIU=y
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -963,15 +1000,7 @@ CONFIG_VGA_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -985,18 +1014,12 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1058,42 +1081,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 # CONFIG_SND_POWERMAC is not set
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 # CONFIG_SND_AOA is not set
-# CONFIG_SND_AOA_SOUNDBUS is not set
-
-#
-# System on Chip audio support
-#
 CONFIG_SND_SOC=y
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
 CONFIG_SND_SOC_MPC8610=y
 CONFIG_SND_SOC_MPC8610_HPCD=y
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
 CONFIG_SND_SOC_CS4270=y
 CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1108,6 +1103,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -1235,6 +1234,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1245,16 +1245,15 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1334,6 +1333,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1358,6 +1358,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1376,19 +1378,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1443,6 +1455,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1475,6 +1491,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 867b8c0215f..ea09be31b6e 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:15 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +93,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -100,6 +100,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,30 +165,40 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_FSL_ULI1575=y
 
 #
@@ -196,16 +214,18 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -219,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +247,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,11 +255,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -264,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -393,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -403,6 +425,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -419,12 +442,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,7 +528,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -571,12 +599,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -603,6 +634,8 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -620,7 +653,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -634,9 +666,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -713,12 +746,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -746,11 +781,14 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
@@ -762,43 +800,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -807,10 +872,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -822,8 +890,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -865,6 +935,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -911,6 +982,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -978,15 +1050,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1000,19 +1064,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1074,39 +1134,14 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+# CONFIG_SND_POWERMAC is not set
+# CONFIG_SND_AOA is not set
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1138,6 +1173,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1189,6 +1225,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1197,7 +1234,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1210,7 +1246,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1264,6 +1299,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1362,6 +1398,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1374,17 +1411,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1463,6 +1499,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1488,6 +1525,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1506,19 +1545,32 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1573,6 +1625,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1605,5 +1661,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 46fffbcd3f9..1501c4336b3 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:16 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -106,10 +107,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -120,6 +127,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -138,8 +146,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -157,6 +163,7 @@ CONFIG_MPC86XADS=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 CONFIG_8xx_CPU6=y
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -175,7 +182,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -192,7 +198,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -253,10 +261,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +365,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -378,7 +383,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -414,7 +418,6 @@ CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
 CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_GIANFAR is not set
 CONFIG_NETDEV_10000=y
 
@@ -484,6 +487,7 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -524,6 +528,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -540,6 +546,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -551,8 +558,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -582,10 +591,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -599,6 +604,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -677,6 +686,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -687,13 +697,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -733,6 +742,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -758,7 +768,15 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -810,6 +828,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -841,6 +863,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 9df78973005..fc3f6dc5812 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:17 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:12 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -108,10 +109,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -121,6 +128,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,8 +147,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -165,6 +171,7 @@ CONFIG_MPC8xx_SECOND_ETH_FEC2=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -183,7 +190,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -200,7 +206,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -224,6 +230,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -231,6 +238,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -263,10 +271,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -453,7 +457,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -555,10 +558,13 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -570,8 +576,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -601,10 +609,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -673,6 +677,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -683,13 +688,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -728,6 +732,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -752,6 +757,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -767,16 +774,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -788,6 +807,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 3688e4bb6fc..80481f27013 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:02:24 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:20:26 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,9 +94,8 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -120,10 +120,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -140,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_LSF=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -159,19 +166,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_IPIC is not set
@@ -221,7 +227,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -244,6 +250,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -251,6 +258,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
@@ -314,10 +322,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -501,7 +505,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
@@ -571,6 +574,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 # CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIUART is not set
 CONFIG_BT_HCIBCM203X=m
 # CONFIG_BT_HCIBPA10X is not set
@@ -588,27 +592,18 @@ CONFIG_BT_HCIBFUSB=m
 CONFIG_CFG80211=m
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
@@ -628,6 +623,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -656,12 +653,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -669,6 +668,8 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -685,7 +686,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -703,10 +703,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -727,8 +725,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -820,6 +816,7 @@ CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
 CONFIG_SCSI_MAC53C94=y
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -844,30 +841,22 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=m
 CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
 # CONFIG_IEEE1394_ETH1394 is not set
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=m
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB=y
@@ -887,7 +876,6 @@ CONFIG_THERM_ADT746X=m
 # CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -936,7 +924,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -952,6 +939,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -994,13 +982,15 @@ CONFIG_PRISM54=m
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 CONFIG_P54_COMMON=m
 # CONFIG_P54_USB is not set
 # CONFIG_P54_PCI is not set
 # CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 CONFIG_B43=m
@@ -1095,6 +1085,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1109,12 +1100,14 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1165,45 +1158,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1212,6 +1230,8 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1221,6 +1241,7 @@ CONFIG_APM_POWER=y
 CONFIG_BATTERY_PMU=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1241,8 +1262,10 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1343,10 +1366,13 @@ CONFIG_FB_3DFX=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1374,15 +1400,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1400,19 +1418,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1474,20 +1486,9 @@ CONFIG_SND_DUMMY=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1495,36 +1496,14 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1554,6 +1533,7 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1579,6 +1559,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1600,6 +1581,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1608,7 +1590,6 @@ CONFIG_USB_STORAGE_ONETOUCH=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1617,7 +1598,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1676,7 +1656,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1693,6 +1672,7 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1702,6 +1682,8 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1789,6 +1771,7 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1811,7 +1794,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1891,6 +1873,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1921,8 +1904,10 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1933,24 +1918,38 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
@@ -2009,6 +2008,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 9d0140e3838..6a5b713a07e 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc9
-# Tue Apr 15 08:46:44 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 12:34:33 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -84,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -109,14 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -127,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,11 +160,10 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_XILINX_VIRTEX=y
 CONFIG_EP405=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y
@@ -158,7 +171,6 @@ CONFIG_WALNUT=y
 CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
 CONFIG_405GP=y
 CONFIG_405EX=y
-CONFIG_XILINX_VIRTEX=y
 CONFIG_XILINX_VIRTEX_II_PRO=y
 CONFIG_XILINX_VIRTEX_4_FX=y
 CONFIG_IBM405_ERR77=y
@@ -211,7 +223,9 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -219,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -229,6 +244,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -239,6 +255,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -248,17 +265,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -267,6 +280,11 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -284,7 +302,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
@@ -295,9 +313,25 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -347,6 +381,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -359,6 +395,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -429,8 +466,17 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -449,12 +495,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -472,12 +520,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -512,7 +563,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -522,12 +572,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -540,6 +590,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -547,6 +598,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -573,6 +625,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -611,13 +664,76 @@ CONFIG_XILINX_HWICAP=m
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
 
 #
-# SPI support
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
 #
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=m
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -633,13 +749,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -656,16 +783,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -674,14 +799,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -690,13 +812,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -715,8 +842,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -741,10 +871,27 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -755,14 +902,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,20 +921,64 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -802,6 +991,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -809,9 +999,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -824,17 +1017,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -846,51 +1052,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index f9d279bb700..c7825dcbf41 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  9 13:50:48 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 10:01:31 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -116,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -136,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -155,8 +164,6 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -231,6 +238,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -248,6 +256,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -275,10 +284,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -287,6 +292,11 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -304,7 +314,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
@@ -315,7 +325,25 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -365,6 +393,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -447,8 +477,17 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -460,6 +499,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
@@ -467,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -480,9 +522,41 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -499,7 +573,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -534,7 +607,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -549,6 +621,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -570,11 +643,21 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -635,8 +718,77 @@ CONFIG_XILINX_HWICAP=m
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=m
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -653,6 +805,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -686,22 +839,113 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -719,8 +963,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -743,8 +992,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -780,9 +1032,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -793,13 +1052,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -813,7 +1071,46 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -822,13 +1119,16 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=m
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -849,6 +1149,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -866,19 +1168,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -934,6 +1245,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -962,8 +1277,8 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index ce250bc9858..fc5930caeb5 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Mon Jun 16 21:11:19 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:22:03 2008
 #
 CONFIG_PPC64=y
 
@@ -14,6 +14,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+CONFIG_VSX=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -105,7 +107,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -129,14 +130,20 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -152,6 +159,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -172,14 +180,13 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_PPC_PSERIES=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
 CONFIG_PPC_ISERIES=y
 
 #
@@ -189,8 +196,6 @@ CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
@@ -213,11 +218,15 @@ CONFIG_PPC_CELLEB=y
 #
 CONFIG_SPU_FS=m
 CONFIG_SPU_FS_64K_LS=y
+# CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
 CONFIG_CBE_RAS=y
+CONFIG_PPC_IBM_CELL_RESETBUTTON=y
+CONFIG_PPC_IBM_CELL_POWERBUTTON=m
 CONFIG_CBE_THERM=m
 CONFIG_CBE_CPUFREQ=m
 CONFIG_CBE_CPUFREQ_PMI=m
+CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m
 CONFIG_OPROFILE_CELL=y
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
@@ -279,7 +288,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -315,8 +324,10 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -327,6 +338,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
@@ -370,10 +382,6 @@ CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -387,6 +395,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -578,6 +587,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -603,12 +614,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -616,6 +629,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -649,10 +663,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -674,8 +686,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -737,6 +747,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=y
+CONFIG_SCSI_IBMVFC=m
+CONFIG_SCSI_IBMVFC_TRACE=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_MVSAS is not set
@@ -758,6 +770,7 @@ CONFIG_SCSI_LPFC=m
 CONFIG_SCSI_DEBUG=m
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 CONFIG_ATA_NONSTANDARD=y
 CONFIG_SATA_PMP=y
@@ -837,9 +850,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
@@ -847,29 +857,21 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB_PMU=y
@@ -884,7 +886,6 @@ CONFIG_WINDFARM_PM112=y
 CONFIG_WINDFARM_PM121=y
 # CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -942,6 +943,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
@@ -949,10 +951,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -968,13 +968,13 @@ CONFIG_TIGON3=y
 CONFIG_SPIDER_NET=m
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
 CONFIG_EHEA=m
 # CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
@@ -1068,6 +1068,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1090,12 +1091,14 @@ CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1131,11 +1134,13 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_ISERIES=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
 CONFIG_HVCS=m
+CONFIG_IBM_BSR=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -1156,45 +1161,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-CONFIG_I2C_PASEMI=y
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PASEMI=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1203,10 +1233,13 @@ CONFIG_I2C_PASEMI=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1218,8 +1251,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1299,10 +1334,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1331,15 +1369,7 @@ CONFIG_FB_LOGO_EXTRA=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1355,19 +1385,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1429,20 +1453,9 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1450,36 +1463,14 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1508,6 +1499,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1556,6 +1548,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1564,7 +1557,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1577,7 +1569,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1769,6 +1760,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1779,12 +1771,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1793,7 +1785,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1878,6 +1869,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1910,8 +1902,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1923,28 +1917,47 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+# CONFIG_FTRACE is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_HCALL_STATS is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -2007,6 +2020,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index e6e91c85da3..3c6dbdef56e 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1,8 +1,7 @@
-# powerpc
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-git2
-# Tue Jul 15 23:54:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:29:50 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -112,7 +111,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -140,12 +138,17 @@ CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
 # CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -266,7 +269,6 @@ CONFIG_TAU=y
 CONFIG_TAU_AVERAGE=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
 CONFIG_PPC_BESTCOMM=y
@@ -287,7 +289,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -311,6 +313,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -326,6 +329,7 @@ CONFIG_PM_DEBUG=y
 CONFIG_CAN_PM_TRACE=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -344,6 +348,7 @@ CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
 CONFIG_FSL_LBC=y
 CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -395,10 +400,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 # CONFIG_TASK_SIZE_BOOL is not set
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -412,6 +413,7 @@ CONFIG_XFRM_USER=y
 CONFIG_XFRM_SUB_POLICY=y
 CONFIG_XFRM_MIGRATE=y
 CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -602,6 +604,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -626,6 +629,7 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
 
 #
 # DECnet: Netfilter Configuration
@@ -643,6 +647,7 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -691,8 +696,10 @@ CONFIG_ATM_LANE=m
 # CONFIG_ATM_MPOA is not set
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 CONFIG_DECNET=m
 CONFIG_DECNET_ROUTER=y
 CONFIG_LLC=m
@@ -832,6 +839,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -855,7 +863,6 @@ CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
-CONFIG_MAC80211_QOS=y
 
 #
 # Rate control algorithm selection
@@ -941,12 +948,14 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_VIRTIO_BLK=m
+CONFIG_BLK_DEV_HD=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=m
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 CONFIG_ENCLOSURE_SERVICES=m
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -954,6 +963,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -971,7 +981,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
@@ -990,10 +999,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -1014,8 +1021,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_BLK_DEV_HD_ONLY=y
-CONFIG_BLK_DEV_HD=y
 
 #
 # SCSI device support
@@ -1125,6 +1130,7 @@ CONFIG_SCSI_DH=y
 CONFIG_SCSI_DH_RDAC=m
 CONFIG_SCSI_DH_HP_SW=m
 CONFIG_SCSI_DH_EMC=m
+# CONFIG_SCSI_DH_ALUA is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -1246,7 +1252,6 @@ CONFIG_WINDFARM=y
 # CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
 CONFIG_IFB=m
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -1256,7 +1261,7 @@ CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_NET_SB1000=m
 # CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -1271,7 +1276,9 @@ CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
 CONFIG_REALTEK_PHY=m
+# CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_MACE=m
@@ -1328,9 +1335,7 @@ CONFIG_NE2000=m
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
 CONFIG_AMD8111_ETH=m
-CONFIG_AMD8111E_NAPI=y
 CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_ADAPTEC_STARFIRE_NAPI=y
 # CONFIG_AC3200 is not set
 # CONFIG_APRICOT is not set
 CONFIG_B44=m
@@ -1359,7 +1364,6 @@ CONFIG_SUNDANCE=m
 CONFIG_TLAN=m
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
-CONFIG_VIA_RHINE_NAPI=y
 CONFIG_SC92031=m
 CONFIG_NET_POCKET=y
 CONFIG_DE600=m
@@ -1372,17 +1376,15 @@ CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 CONFIG_DL2K=m
 CONFIG_E1000=m
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 CONFIG_E1000E=m
-CONFIG_E1000E_ENABLED=y
 CONFIG_IP1000=m
 CONFIG_IGB=m
+CONFIG_IGB_LRO=y
 CONFIG_NS83820=m
 CONFIG_HAMACHI=m
 CONFIG_YELLOWFIN=m
 CONFIG_R8169=m
-CONFIG_R8169_NAPI=y
 CONFIG_R8169_VLAN=y
 CONFIG_SIS190=m
 CONFIG_SKGE=m
@@ -1393,21 +1395,18 @@ CONFIG_VIA_VELOCITY=m
 CONFIG_TIGON3=m
 CONFIG_BNX2=m
 CONFIG_GIANFAR=m
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 CONFIG_MV643XX_ETH=m
 CONFIG_QLA3XXX=m
 CONFIG_ATL1=m
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 CONFIG_CHELSIO_T1=m
 CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T1_NAPI=y
 CONFIG_CHELSIO_T3=m
 CONFIG_IXGBE=m
 CONFIG_IXGB=m
-CONFIG_IXGB_NAPI=y
 CONFIG_S2IO=m
-CONFIG_S2IO_NAPI=y
 CONFIG_MYRI10GE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_NIU=m
@@ -1477,8 +1476,7 @@ CONFIG_ATM_IDT77252_USE_SUNI=y
 # CONFIG_ATM_AMBASSADOR is not set
 # CONFIG_ATM_HORIZON is not set
 # CONFIG_ATM_IA is not set
-CONFIG_ATM_FORE200E_MAYBE=m
-# CONFIG_ATM_FORE200E_PCA is not set
+# CONFIG_ATM_FORE200E is not set
 CONFIG_ATM_HE=m
 # CONFIG_ATM_HE_USE_SUNI is not set
 CONFIG_FDDI=y
@@ -1551,6 +1549,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -1611,33 +1610,18 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
 CONFIG_GAMEPORT_EMU10K1=m
 CONFIG_GAMEPORT_FM801=m
-CONFIG_INPUT_LIRC=y
-CONFIG_LIRC_DEV=m
-CONFIG_LIRC_ATIUSB=m
-CONFIG_LIRC_BT829=m
-CONFIG_LIRC_CMDIR=m
-CONFIG_LIRC_I2C=m
-CONFIG_LIRC_IGORPLUGUSB=m
-CONFIG_LIRC_IMON=m
-CONFIG_LIRC_IT87=m
-CONFIG_LIRC_MCEUSB=m
-CONFIG_LIRC_MCEUSB2=m
-CONFIG_LIRC_PVR150=m
-CONFIG_LIRC_PARALLEL=m
-CONFIG_LIRC_SERIAL=m
-CONFIG_LIRC_SIR=m
-CONFIG_LIRC_STREAMZAP=m
-CONFIG_LIRC_TTUSBIR=m
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1701,12 +1685,12 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_CRASH is not set
 CONFIG_BRIQ_PANEL=m
 CONFIG_PRINTER=m
 CONFIG_LP_CONSOLE=y
 CONFIG_PPDEV=m
 # CONFIG_HVC_RTAS is not set
+# CONFIG_VIRTIO_CONSOLE is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=m
@@ -1728,6 +1712,7 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_ALGOPCA=m
 
@@ -1807,20 +1792,24 @@ CONFIG_SENSORS_TSL2550=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
 CONFIG_W1=m
@@ -1850,6 +1839,7 @@ CONFIG_APM_POWER=m
 CONFIG_BATTERY_PMU=m
 CONFIG_HWMON=m
 CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
 CONFIG_SENSORS_AD7418=m
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
@@ -1913,8 +1903,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_MPC5200_WDT is not set
-CONFIG_83xx_WDT=m
+# CONFIG_8xxx_WDT is not set
 CONFIG_WATCHDOG_RTAS=m
 
 #
@@ -1953,8 +1944,10 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=m
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1993,6 +1986,7 @@ CONFIG_MEDIA_TUNER_QT1010=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
 CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
 CONFIG_VIDEO_V4L2=m
 CONFIG_VIDEO_V4L1=m
 CONFIG_VIDEOBUF_GEN=m
@@ -2000,13 +1994,13 @@ CONFIG_VIDEOBUF_DMA_SG=m
 CONFIG_VIDEOBUF_VMALLOC=m
 CONFIG_VIDEOBUF_DVB=m
 CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR_I2C=m
 CONFIG_VIDEO_IR=m
 CONFIG_VIDEO_TVEEPROM=m
 CONFIG_VIDEO_TUNER=m
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
 
 #
 # Encoders/decoders and other helper chips
@@ -2108,6 +2102,8 @@ CONFIG_VIDEO_CX18=m
 # CONFIG_VIDEO_CAFE_CCIC is not set
 CONFIG_V4L_USB_DRIVERS=y
 CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
 CONFIG_VIDEO_PVRUSB2=m
 CONFIG_VIDEO_PVRUSB2_SYSFS=y
 CONFIG_VIDEO_PVRUSB2_DVB=y
@@ -2133,11 +2129,14 @@ CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
 CONFIG_USB_ZR364XX=m
 CONFIG_USB_STKWEBCAM=m
+# CONFIG_USB_S2255 is not set
 CONFIG_SOC_CAMERA=m
 CONFIG_SOC_CAMERA_MT9M001=m
 # CONFIG_MT9M001_PCA9536_SWITCH is not set
 CONFIG_SOC_CAMERA_MT9V022=m
 # CONFIG_MT9V022_PCA9536_SWITCH is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_CADET is not set
 # CONFIG_RADIO_RTRACK is not set
@@ -2194,6 +2193,8 @@ CONFIG_DVB_USB_DTT200U=m
 CONFIG_DVB_USB_OPERA1=m
 CONFIG_DVB_USB_AF9005=m
 CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
 CONFIG_DVB_TTUSB_BUDGET=m
 CONFIG_DVB_TTUSB_DEC=m
 CONFIG_DVB_CINERGYT2=m
@@ -2203,6 +2204,7 @@ CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
 CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
 CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
 CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -2253,6 +2255,7 @@ CONFIG_DVB_SP8870=m
 CONFIG_DVB_SP887X=m
 CONFIG_DVB_CX22700=m
 CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
 CONFIG_DVB_L64781=m
 CONFIG_DVB_TDA1004X=m
 CONFIG_DVB_NXT6000=m
@@ -2389,12 +2392,15 @@ CONFIG_FB_TRIDENT=m
 CONFIG_FB_TRIDENT_ACCEL=y
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_FSL_DIU is not set
 CONFIG_FB_SM501=m
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_PLATFORM=m
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -2613,6 +2619,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -2640,6 +2647,7 @@ CONFIG_USB_U132_HCD=m
 CONFIG_USB_SL811_HCD=m
 # CONFIG_USB_SL811_CS is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -2668,6 +2676,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 CONFIG_USB_STORAGE_ALAUDA=y
 CONFIG_USB_STORAGE_ONETOUCH=y
 CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_SIERRA is not set
 CONFIG_USB_STORAGE_CYPRESS_ATACB=y
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -2676,7 +2685,6 @@ CONFIG_USB_STORAGE_CYPRESS_ATACB=y
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -2686,7 +2694,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_AIRPRIME=m
 CONFIG_USB_SERIAL_ARK3116=m
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_CH341=m
@@ -2734,7 +2741,6 @@ CONFIG_USB_SERIAL_DEBUG=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_AUERSWALD=m
 # CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
@@ -2770,7 +2776,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -2853,6 +2861,7 @@ CONFIG_KS0108_PORT=0x378
 CONFIG_KS0108_DELAY=2
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
 CONFIG_UIO_SMX=m
 
 #
@@ -2899,6 +2908,7 @@ CONFIG_GFS2_FS_LOCKING_DLM=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -2959,11 +2969,9 @@ CONFIG_BEFS_FS=m
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 CONFIG_VXFS_FS=m
 CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 # CONFIG_HPFS_FS is not set
 CONFIG_QNX4FS_FS=m
 CONFIG_ROMFS_FS=m
@@ -2988,7 +2996,6 @@ CONFIG_NFS_ACL_SUPPORT=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -3011,7 +3018,6 @@ CONFIG_NCPFS_SMALLDOS=y
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 CONFIG_9P_FS=m
 
@@ -3087,7 +3093,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -3120,6 +3126,8 @@ CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -3143,6 +3151,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
@@ -3158,6 +3167,7 @@ CONFIG_FAIL_MAKE_REQUEST=y
 CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FTRACE=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_TRACER_MAX_TRACE=y
@@ -3168,16 +3178,18 @@ CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_BUILD_DOCSRC is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_KGDB_CONSOLE is not set
 CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index bc3bf62ddc2..b390b747664 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:13 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -82,7 +87,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -90,6 +94,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -107,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -120,6 +131,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -138,33 +150,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 # CONFIG_MPC8272_ADS is not set
 CONFIG_PQ2FADS=y
 # CONFIG_EP8248E is not set
 CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -181,7 +203,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -199,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -206,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -213,9 +237,11 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -243,10 +269,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -447,9 +469,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -461,14 +485,15 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -486,7 +511,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 
 #
@@ -498,9 +522,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -517,9 +539,8 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDE_PMAC is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -537,13 +558,12 @@ CONFIG_IDE_PROC_FS=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -567,8 +587,11 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -590,7 +613,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -602,6 +624,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -667,6 +690,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -677,7 +701,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -692,6 +718,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -712,6 +739,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -724,6 +752,8 @@ CONFIG_SERIAL_CPM_SCC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -734,10 +764,28 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -749,8 +797,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -782,10 +832,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -795,6 +841,8 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -807,7 +855,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_PXA27X is not set
@@ -826,6 +874,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -893,6 +942,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -902,8 +952,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -983,6 +1033,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1009,6 +1060,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1026,19 +1079,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1046,6 +1111,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1086,6 +1152,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1117,6 +1187,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index c6b83577c05..01b54eac1ff 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -94,7 +95,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -118,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -132,6 +138,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -151,25 +158,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 CONFIG_PPC_PRPMC2800=y
+# CONFIG_PPC_C2K is not set
 CONFIG_MV64X60=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -198,7 +205,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -221,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -228,6 +236,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -264,10 +273,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -359,7 +364,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -461,12 +468,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -487,7 +496,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -505,10 +513,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -526,8 +532,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -603,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -669,6 +674,10 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -676,7 +685,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -741,10 +749,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -760,6 +766,7 @@ CONFIG_E1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -840,6 +847,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -875,43 +883,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -920,10 +949,13 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -977,6 +1009,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -988,8 +1021,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1028,10 +1063,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1060,6 +1091,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1102,7 +1134,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1115,7 +1146,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1169,6 +1199,7 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1258,6 +1289,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1267,12 +1299,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1312,6 +1343,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1337,7 +1369,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1390,6 +1431,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index f9a3d3b394c..b6eee7c93cd 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 16 13:59:24 2008
+# Linux kernel version: 2.6.27-rc3
+# Wed Aug 20 08:16:53 2008
 #
 CONFIG_PPC64=y
 
@@ -92,7 +92,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,11 +117,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -179,6 +183,7 @@ CONFIG_PS3_STORAGE=y
 CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=y
 CONFIG_PS3_FLASH=y
+CONFIG_OPROFILE_PS3=y
 CONFIG_PS3_LPM=m
 CONFIG_PPC_CELL=y
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -218,7 +223,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -252,8 +257,10 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+# CONFIG_MEMORY_HOTREMOVE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -276,19 +283,17 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HAS_RAPIDIO is not set
+# CONFIG_RELOCATABLE is not set
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,9 +404,22 @@ CONFIG_BT_HCIUSB_SCO=y
 #
 # Wireless
 #
-# CONFIG_CFG80211 is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS_EXT_SYSFS is not set
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
@@ -420,14 +438,79 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PS3VRAM=y
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -443,6 +526,7 @@ CONFIG_BLK_DEV_RAM_SIZE=65535
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -494,7 +578,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -510,9 +593,9 @@ CONFIG_MII=m
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
+CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
 # CONFIG_NETDEV_10000 is not set
 
 #
@@ -523,8 +606,22 @@ CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+# CONFIG_RT2500USB is not set
+CONFIG_RT73USB=m
+# CONFIG_RT2X00_DEBUG is not set
 
 #
 # USB Network Adapters
@@ -622,6 +719,7 @@ CONFIG_INPUT_JOYSTICK=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -647,6 +745,8 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -663,8 +763,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -796,6 +898,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -817,6 +920,10 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_R8A66597_HCD is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
@@ -843,6 +950,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -851,7 +959,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -864,7 +971,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -998,9 +1104,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1011,14 +1119,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1086,7 +1193,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1115,6 +1222,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1138,6 +1247,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1146,6 +1256,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FTRACE=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
@@ -1153,12 +1264,14 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index fe6ffa683d7..e77c5e7a0be 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:03:28 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:31:07 2008
 #
 CONFIG_PPC64=y
 
@@ -14,6 +14,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+CONFIG_VSX=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -104,7 +106,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -132,11 +133,17 @@ CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -152,6 +159,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -172,17 +180,14 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_PPC_PSERIES=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -226,7 +231,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -275,6 +280,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -304,10 +310,6 @@ CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -321,6 +323,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -498,6 +501,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -531,12 +536,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -544,6 +551,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -575,10 +583,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -596,8 +602,6 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -659,6 +663,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=y
+CONFIG_SCSI_IBMVFC=m
+CONFIG_SCSI_IBMVFC_TRACE=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
@@ -681,6 +687,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -703,9 +710,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
@@ -713,12 +717,15 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -726,7 +733,23 @@ CONFIG_BONDING=m
 CONFIG_TUN=m
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -759,6 +782,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_NET_POCKET is not set
@@ -767,10 +791,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -785,14 +807,14 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_EHEA=y
 # CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -883,6 +905,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -906,12 +929,14 @@ CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -943,6 +968,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
@@ -961,44 +987,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1007,10 +1054,13 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1022,8 +1072,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1102,10 +1154,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_PLATFORM=m
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1133,10 +1188,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1165,6 +1216,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1190,6 +1242,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1211,6 +1264,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1219,7 +1273,6 @@ CONFIG_USB_STORAGE_ONETOUCH=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1233,7 +1286,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1250,6 +1302,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1316,6 +1369,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1371,6 +1425,7 @@ CONFIG_CONFIGFS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1394,7 +1449,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1463,6 +1517,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1495,8 +1550,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1508,30 +1565,49 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+# CONFIG_FTRACE is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HCALL_STATS=y
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 CONFIG_VIRQ_DEBUG=y
 # CONFIG_BOOTX_TEXT is not set
@@ -1590,6 +1666,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
index 8227510b41a..f545421f985 100644
--- a/arch/powerpc/configs/sbc8641d_defconfig
+++ b/arch/powerpc/configs/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:19 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:15 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
@@ -92,7 +93,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -100,6 +100,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -117,10 +118,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,30 +164,40 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 CONFIG_SBC8641D=y
 # CONFIG_MPC8610_HPCD is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +213,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -203,9 +221,11 @@ CONFIG_PREEMPT=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -219,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +247,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,11 +255,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -265,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -282,6 +302,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -406,6 +427,7 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -429,6 +451,7 @@ CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
 
 #
 # Bridge: Netfilter Configuration
@@ -451,8 +474,10 @@ CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -472,7 +497,6 @@ CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -625,6 +649,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -640,12 +665,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -680,12 +707,15 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -712,6 +742,8 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -729,7 +761,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -743,9 +774,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -768,7 +800,7 @@ CONFIG_ATM_DRIVERS=y
 # CONFIG_ATM_AMBASSADOR is not set
 # CONFIG_ATM_HORIZON is not set
 # CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_FORE200E is not set
 # CONFIG_ATM_HE is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -834,6 +866,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -857,11 +890,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
@@ -874,42 +910,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -918,10 +981,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -931,6 +997,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -975,6 +1042,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -982,6 +1050,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -998,8 +1069,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1038,10 +1111,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1056,6 +1125,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -1096,6 +1169,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1145,6 +1219,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
@@ -1155,14 +1230,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1183,6 +1257,7 @@ CONFIG_CIFS_POSIX=y
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
@@ -1233,6 +1308,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1259,6 +1335,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1275,21 +1353,34 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1299,7 +1390,6 @@ CONFIG_DEBUGGER=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
@@ -1349,6 +1439,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1382,5 +1476,6 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 88f6aa8273b..4340cc1c5b6 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:20 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -87,7 +88,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,10 +110,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -130,6 +136,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,25 +156,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 CONFIG_STORCENTER=y
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
@@ -221,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -229,6 +237,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -264,10 +273,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -456,20 +461,22 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
@@ -483,7 +490,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -500,10 +506,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -521,8 +525,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -599,6 +601,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -616,12 +619,15 @@ CONFIG_MD_RAID5_RESHAPE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -635,14 +641,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -653,6 +657,7 @@ CONFIG_R8169=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -734,43 +739,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -779,10 +805,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -794,8 +823,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -827,10 +858,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -849,6 +876,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -896,6 +924,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -904,7 +933,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -917,7 +945,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -971,6 +998,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1074,6 +1102,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1151,6 +1180,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1178,7 +1208,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/include/asm-powerpc/8253pit.h b/arch/powerpc/include/asm/8253pit.h
index b70d6e53b30..b70d6e53b30 100644
--- a/include/asm-powerpc/8253pit.h
+++ b/arch/powerpc/include/asm/8253pit.h
diff --git a/include/asm-powerpc/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
index 4b0e1520600..4b0e1520600 100644
--- a/include/asm-powerpc/8xx_immap.h
+++ b/arch/powerpc/include/asm/8xx_immap.h
diff --git a/include/asm-powerpc/Kbuild b/arch/powerpc/include/asm/Kbuild
index 5ab7d7fe198..5ab7d7fe198 100644
--- a/include/asm-powerpc/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
diff --git a/include/asm-powerpc/a.out.h b/arch/powerpc/include/asm/a.out.h
index 89cead6b176..89cead6b176 100644
--- a/include/asm-powerpc/a.out.h
+++ b/arch/powerpc/include/asm/a.out.h
diff --git a/include/asm-powerpc/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
index 98324c5a828..98324c5a828 100644
--- a/include/asm-powerpc/abs_addr.h
+++ b/arch/powerpc/include/asm/abs_addr.h
diff --git a/include/asm-powerpc/agp.h b/arch/powerpc/include/asm/agp.h
index 86455c4c31e..86455c4c31e 100644
--- a/include/asm-powerpc/agp.h
+++ b/arch/powerpc/include/asm/agp.h
diff --git a/include/asm-powerpc/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
index 8f0fe797194..8f0fe797194 100644
--- a/include/asm-powerpc/asm-compat.h
+++ b/arch/powerpc/include/asm/asm-compat.h
diff --git a/include/asm-powerpc/atomic.h b/arch/powerpc/include/asm/atomic.h
index f3fc733758f..f3fc733758f 100644
--- a/include/asm-powerpc/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
diff --git a/include/asm-powerpc/auxvec.h b/arch/powerpc/include/asm/auxvec.h
index 19a099b62cd..19a099b62cd 100644
--- a/include/asm-powerpc/auxvec.h
+++ b/arch/powerpc/include/asm/auxvec.h
diff --git a/include/asm-powerpc/backlight.h b/arch/powerpc/include/asm/backlight.h
index 8cf5c37c381..8cf5c37c381 100644
--- a/include/asm-powerpc/backlight.h
+++ b/arch/powerpc/include/asm/backlight.h
diff --git a/include/asm-powerpc/bitops.h b/arch/powerpc/include/asm/bitops.h
index 897eade3afb..897eade3afb 100644
--- a/include/asm-powerpc/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
diff --git a/include/asm-powerpc/bootx.h b/arch/powerpc/include/asm/bootx.h
index 57b82e3f89c..57b82e3f89c 100644
--- a/include/asm-powerpc/bootx.h
+++ b/arch/powerpc/include/asm/bootx.h
diff --git a/include/asm-powerpc/btext.h b/arch/powerpc/include/asm/btext.h
index 906f46e3100..906f46e3100 100644
--- a/include/asm-powerpc/btext.h
+++ b/arch/powerpc/include/asm/btext.h
diff --git a/include/asm-powerpc/bug.h b/arch/powerpc/include/asm/bug.h
index e55d1f66b86..e55d1f66b86 100644
--- a/include/asm-powerpc/bug.h
+++ b/arch/powerpc/include/asm/bug.h
diff --git a/include/asm-powerpc/bugs.h b/arch/powerpc/include/asm/bugs.h
index 42fdb73e306..42fdb73e306 100644
--- a/include/asm-powerpc/bugs.h
+++ b/arch/powerpc/include/asm/bugs.h
diff --git a/include/asm-powerpc/byteorder.h b/arch/powerpc/include/asm/byteorder.h
index b37752214a1..b37752214a1 100644
--- a/include/asm-powerpc/byteorder.h
+++ b/arch/powerpc/include/asm/byteorder.h
diff --git a/include/asm-powerpc/cache.h b/arch/powerpc/include/asm/cache.h
index 81de6eb3455..81de6eb3455 100644
--- a/include/asm-powerpc/cache.h
+++ b/arch/powerpc/include/asm/cache.h
diff --git a/include/asm-powerpc/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index ba667a383b8..ba667a383b8 100644
--- a/include/asm-powerpc/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
diff --git a/include/asm-powerpc/cell-pmu.h b/arch/powerpc/include/asm/cell-pmu.h
index 8066eede3a0..8066eede3a0 100644
--- a/include/asm-powerpc/cell-pmu.h
+++ b/arch/powerpc/include/asm/cell-pmu.h
diff --git a/include/asm-powerpc/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h
index fd6fd00434e..fd6fd00434e 100644
--- a/include/asm-powerpc/cell-regs.h
+++ b/arch/powerpc/include/asm/cell-regs.h
diff --git a/include/asm-powerpc/checksum.h b/arch/powerpc/include/asm/checksum.h
index 7cdf358337c..7cdf358337c 100644
--- a/include/asm-powerpc/checksum.h
+++ b/arch/powerpc/include/asm/checksum.h
diff --git a/include/asm-powerpc/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h
index ab1882c1e17..ab1882c1e17 100644
--- a/include/asm-powerpc/clk_interface.h
+++ b/arch/powerpc/include/asm/clk_interface.h
diff --git a/include/asm-powerpc/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index 107d9b915e3..107d9b915e3 100644
--- a/include/asm-powerpc/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
diff --git a/include/asm-powerpc/compat.h b/arch/powerpc/include/asm/compat.h
index d811a8cd7b5..d811a8cd7b5 100644
--- a/include/asm-powerpc/compat.h
+++ b/arch/powerpc/include/asm/compat.h
diff --git a/include/asm-powerpc/cpm.h b/arch/powerpc/include/asm/cpm.h
index 63a55337c2d..24d79e3abd8 100644
--- a/include/asm-powerpc/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -3,6 +3,7 @@
 
 #include <linux/compiler.h>
 #include <linux/types.h>
+#include <linux/of.h>
 
 /* Opcodes common to CPM1 and CPM2
 */
@@ -100,4 +101,6 @@ unsigned long cpm_muram_offset(void __iomem *addr);
 dma_addr_t cpm_muram_dma(void __iomem *addr);
 int cpm_command(u32 command, u8 opcode);
 
+int cpm2_gpiochip_add32(struct device_node *np);
+
 #endif
diff --git a/include/asm-powerpc/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff798744c1..2ff798744c1 100644
--- a/include/asm-powerpc/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
diff --git a/include/asm-powerpc/cpm2.h b/arch/powerpc/include/asm/cpm2.h
index 2c7fd9cee29..0f5e8ff59a8 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -12,6 +12,7 @@
 
 #include <asm/immap_cpm2.h>
 #include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
 
 #ifdef CONFIG_PPC_85xx
 #define CPM_MAP_ADDR (get_immrbase() + 0x80000)
@@ -93,10 +94,40 @@ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
 #define cpm_dpfree cpm_muram_free
 #define cpm_dpram_addr cpm_muram_addr
 
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
 extern void cpm2_reset(void);
 
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK	(get_brgfreq())
+#define CPM2_BRG_UART_CLK	(CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
 /* Function code bits, usually generic to devices.
 */
 #define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
@@ -195,17 +226,6 @@ typedef struct smc_uart {
 #define SMCM_TX		((unsigned char)0x02)
 #define SMCM_RX		((unsigned char)0x01)
 
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST		((uint)0x00020000)
-#define CPM_BRG_EN		((uint)0x00010000)
-#define CPM_BRG_EXTC_INT	((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
-#define CPM_BRG_ATB		((uint)0x00002000)
-#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
-#define CPM_BRG_DIV16		((uint)0x00000001)
-
 /* SCCs.
 */
 #define SCC_GSMRH_IRP		((uint)0x00040000)
@@ -317,6 +337,11 @@ typedef struct scc_param {
 	uint	scc_tcrc;	/* Internal */
 } sccp_t;
 
+/* Function code bits.
+*/
+#define SCC_EB	((u_char) 0x10)	/* Set big endian byte order */
+#define SCC_GBL	((u_char) 0x20) /* Snooping enabled */
+
 /* CPM Ethernet through SCC1.
  */
 typedef struct scc_enet {
diff --git a/include/asm-powerpc/cputable.h b/arch/powerpc/include/asm/cputable.h
index ef8a248dfd5..ef8a248dfd5 100644
--- a/include/asm-powerpc/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
diff --git a/include/asm-powerpc/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index fb11b0c459b..fb11b0c459b 100644
--- a/include/asm-powerpc/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
diff --git a/include/asm-powerpc/cputime.h b/arch/powerpc/include/asm/cputime.h
index f42e623030e..f42e623030e 100644
--- a/include/asm-powerpc/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
diff --git a/include/asm-powerpc/current.h b/arch/powerpc/include/asm/current.h
index e2c7f06931e..e2c7f06931e 100644
--- a/include/asm-powerpc/current.h
+++ b/arch/powerpc/include/asm/current.h
diff --git a/include/asm-powerpc/dbdma.h b/arch/powerpc/include/asm/dbdma.h
index e23f07e73cb..e23f07e73cb 100644
--- a/include/asm-powerpc/dbdma.h
+++ b/arch/powerpc/include/asm/dbdma.h
diff --git a/include/asm-powerpc/dcr-generic.h b/arch/powerpc/include/asm/dcr-generic.h
index 35b71599ec4..35b71599ec4 100644
--- a/include/asm-powerpc/dcr-generic.h
+++ b/arch/powerpc/include/asm/dcr-generic.h
diff --git a/include/asm-powerpc/dcr-mmio.h b/arch/powerpc/include/asm/dcr-mmio.h
index acd491dbd45..acd491dbd45 100644
--- a/include/asm-powerpc/dcr-mmio.h
+++ b/arch/powerpc/include/asm/dcr-mmio.h
diff --git a/include/asm-powerpc/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h
index 72d2b72c739..72d2b72c739 100644
--- a/include/asm-powerpc/dcr-native.h
+++ b/arch/powerpc/include/asm/dcr-native.h
diff --git a/include/asm-powerpc/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h
index 29b0ecef980..29b0ecef980 100644
--- a/include/asm-powerpc/dcr-regs.h
+++ b/arch/powerpc/include/asm/dcr-regs.h
diff --git a/include/asm-powerpc/dcr.h b/arch/powerpc/include/asm/dcr.h
index 53b283050ab..d13fb68bb5c 100644
--- a/include/asm-powerpc/dcr.h
+++ b/arch/powerpc/include/asm/dcr.h
@@ -65,17 +65,13 @@ typedef dcr_host_mmio_t dcr_host_t;
 #endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
 
 /*
- * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR
- * base from the device-tree
+ * additional helpers to read the DCR * base from the device-tree
  */
-#ifdef CONFIG_PPC_MERGE
 struct device_node;
 extern unsigned int dcr_resource_start(struct device_node *np,
 				       unsigned int index);
 extern unsigned int dcr_resource_len(struct device_node *np,
 				     unsigned int index);
-#endif /* CONFIG_PPC_MERGE */
-
 #endif /* CONFIG_PPC_DCR */
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/delay.h b/arch/powerpc/include/asm/delay.h
index f9200a65c63..f9200a65c63 100644
--- a/include/asm-powerpc/delay.h
+++ b/arch/powerpc/include/asm/delay.h
diff --git a/include/asm-powerpc/device.h b/arch/powerpc/include/asm/device.h
index 228ab2a315b..228ab2a315b 100644
--- a/include/asm-powerpc/device.h
+++ b/arch/powerpc/include/asm/device.h
diff --git a/include/asm-powerpc/div64.h b/arch/powerpc/include/asm/div64.h
index 6cd978cefb2..6cd978cefb2 100644
--- a/include/asm-powerpc/div64.h
+++ b/arch/powerpc/include/asm/div64.h
diff --git a/include/asm-powerpc/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index c7ca45f97dd..c7ca45f97dd 100644
--- a/include/asm-powerpc/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
diff --git a/include/asm-powerpc/dma.h b/arch/powerpc/include/asm/dma.h
index a7e06e25c70..a7e06e25c70 100644
--- a/include/asm-powerpc/dma.h
+++ b/arch/powerpc/include/asm/dma.h
diff --git a/include/asm-powerpc/edac.h b/arch/powerpc/include/asm/edac.h
index 6ead88bbfbb..6ead88bbfbb 100644
--- a/include/asm-powerpc/edac.h
+++ b/arch/powerpc/include/asm/edac.h
diff --git a/include/asm-powerpc/eeh.h b/arch/powerpc/include/asm/eeh.h
index b886bec6701..b886bec6701 100644
--- a/include/asm-powerpc/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
diff --git a/include/asm-powerpc/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h
index cc3cb04539a..cc3cb04539a 100644
--- a/include/asm-powerpc/eeh_event.h
+++ b/arch/powerpc/include/asm/eeh_event.h
diff --git a/include/asm-powerpc/elf.h b/arch/powerpc/include/asm/elf.h
index 80d1f399ee5..64c6ee22eef 100644
--- a/include/asm-powerpc/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -409,6 +409,13 @@ do {									\
 /* Keep this the last entry.  */
 #define R_PPC64_NUM		107
 
+/* There's actually a third entry here, but it's unused */
+struct ppc64_opd_entry
+{
+	unsigned long funcaddr;
+	unsigned long r2;
+};
+
 #ifdef  __KERNEL__
 
 #ifdef CONFIG_SPU_BASE
diff --git a/include/asm-powerpc/emergency-restart.h b/arch/powerpc/include/asm/emergency-restart.h
index 3711bd9d50b..3711bd9d50b 100644
--- a/include/asm-powerpc/emergency-restart.h
+++ b/arch/powerpc/include/asm/emergency-restart.h
diff --git a/include/asm-powerpc/errno.h b/arch/powerpc/include/asm/errno.h
index 8c145fd17d8..8c145fd17d8 100644
--- a/include/asm-powerpc/errno.h
+++ b/arch/powerpc/include/asm/errno.h
diff --git a/include/asm-powerpc/exception.h b/arch/powerpc/include/asm/exception.h
index 329148b5acc..329148b5acc 100644
--- a/include/asm-powerpc/exception.h
+++ b/arch/powerpc/include/asm/exception.h
diff --git a/include/asm-powerpc/fb.h b/arch/powerpc/include/asm/fb.h
index 411af8d17a6..411af8d17a6 100644
--- a/include/asm-powerpc/fb.h
+++ b/arch/powerpc/include/asm/fb.h
diff --git a/include/asm-powerpc/fcntl.h b/arch/powerpc/include/asm/fcntl.h
index ce5c4516d40..ce5c4516d40 100644
--- a/include/asm-powerpc/fcntl.h
+++ b/arch/powerpc/include/asm/fcntl.h
diff --git a/include/asm-powerpc/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index a1029967620..a1029967620 100644
--- a/include/asm-powerpc/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
diff --git a/include/asm-powerpc/firmware.h b/arch/powerpc/include/asm/firmware.h
index 3a179827528..3a179827528 100644
--- a/include/asm-powerpc/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
diff --git a/include/asm-powerpc/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index 8428b38a3d3..8428b38a3d3 100644
--- a/include/asm-powerpc/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
diff --git a/include/asm-powerpc/floppy.h b/arch/powerpc/include/asm/floppy.h
index 24bd34c57e9..24bd34c57e9 100644
--- a/include/asm-powerpc/floppy.h
+++ b/arch/powerpc/include/asm/floppy.h
diff --git a/include/asm-powerpc/fs_pd.h b/arch/powerpc/include/asm/fs_pd.h
index 9361cd5342c..9361cd5342c 100644
--- a/include/asm-powerpc/fs_pd.h
+++ b/arch/powerpc/include/asm/fs_pd.h
diff --git a/include/asm-powerpc/fsl_gtm.h b/arch/powerpc/include/asm/fsl_gtm.h
index 8e8c9b5032d..8e8c9b5032d 100644
--- a/include/asm-powerpc/fsl_gtm.h
+++ b/arch/powerpc/include/asm/fsl_gtm.h
diff --git a/include/asm-powerpc/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 303f5484c05..303f5484c05 100644
--- a/include/asm-powerpc/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
diff --git a/include/asm-powerpc/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index de921326cca..de921326cca 100644
--- a/include/asm-powerpc/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
diff --git a/include/asm-powerpc/futex.h b/arch/powerpc/include/asm/futex.h
index 6d406c5c5de..6d406c5c5de 100644
--- a/include/asm-powerpc/futex.h
+++ b/arch/powerpc/include/asm/futex.h
diff --git a/include/asm-powerpc/gpio.h b/arch/powerpc/include/asm/gpio.h
index ea04632399d..ea04632399d 100644
--- a/include/asm-powerpc/gpio.h
+++ b/arch/powerpc/include/asm/gpio.h
diff --git a/include/asm-powerpc/grackle.h b/arch/powerpc/include/asm/grackle.h
index bd7812a519d..bd7812a519d 100644
--- a/include/asm-powerpc/grackle.h
+++ b/arch/powerpc/include/asm/grackle.h
diff --git a/include/asm-powerpc/hardirq.h b/arch/powerpc/include/asm/hardirq.h
index 288e14d53b7..288e14d53b7 100644
--- a/include/asm-powerpc/hardirq.h
+++ b/arch/powerpc/include/asm/hardirq.h
diff --git a/include/asm-powerpc/heathrow.h b/arch/powerpc/include/asm/heathrow.h
index 93f54958a9d..93f54958a9d 100644
--- a/include/asm-powerpc/heathrow.h
+++ b/arch/powerpc/include/asm/heathrow.h
diff --git a/include/asm-powerpc/highmem.h b/arch/powerpc/include/asm/highmem.h
index 5d99b6489d5..5d99b6489d5 100644
--- a/include/asm-powerpc/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
diff --git a/include/asm-powerpc/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
index 26f0d0ab27a..26f0d0ab27a 100644
--- a/include/asm-powerpc/hugetlb.h
+++ b/arch/powerpc/include/asm/hugetlb.h
diff --git a/include/asm-powerpc/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index fbe2932fa9e..6251a4b10be 100644
--- a/include/asm-powerpc/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -291,6 +291,28 @@ struct hvcall_mpp_data {
 };
 
 int h_get_mpp(struct hvcall_mpp_data *);
+
+#ifdef CONFIG_PPC_PSERIES
+extern int CMO_PrPSP;
+extern int CMO_SecPSP;
+extern unsigned long CMO_PageSize;
+
+static inline int cmo_get_primary_psp(void)
+{
+	return CMO_PrPSP;
+}
+
+static inline int cmo_get_secondary_psp(void)
+{
+	return CMO_SecPSP;
+}
+
+static inline unsigned long cmo_get_page_size(void)
+{
+	return CMO_PageSize;
+}
+#endif /* CONFIG_PPC_PSERIES */
+
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_HVCALL_H */
diff --git a/include/asm-powerpc/hvconsole.h b/arch/powerpc/include/asm/hvconsole.h
index 35ea69e8121..35ea69e8121 100644
--- a/include/asm-powerpc/hvconsole.h
+++ b/arch/powerpc/include/asm/hvconsole.h
diff --git a/include/asm-powerpc/hvcserver.h b/arch/powerpc/include/asm/hvcserver.h
index 67d7da3a4da..67d7da3a4da 100644
--- a/include/asm-powerpc/hvcserver.h
+++ b/arch/powerpc/include/asm/hvcserver.h
diff --git a/include/asm-powerpc/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index f75a5fc64d2..f75a5fc64d2 100644
--- a/include/asm-powerpc/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
diff --git a/include/asm-powerpc/hydra.h b/arch/powerpc/include/asm/hydra.h
index 1ad4eed07fb..1ad4eed07fb 100644
--- a/include/asm-powerpc/hydra.h
+++ b/arch/powerpc/include/asm/hydra.h
diff --git a/include/asm-powerpc/i8259.h b/arch/powerpc/include/asm/i8259.h
index db1362f8c60..105ade297aa 100644
--- a/include/asm-powerpc/i8259.h
+++ b/arch/powerpc/include/asm/i8259.h
@@ -4,14 +4,9 @@
 
 #include <linux/irq.h>
 
-#ifdef CONFIG_PPC_MERGE
 extern void i8259_init(struct device_node *node, unsigned long intack_addr);
 extern unsigned int i8259_irq(void);
 extern struct irq_host *i8259_get_host(void);
-#else
-extern void i8259_init(unsigned long intack_addr, int offset);
-extern int i8259_irq(void);
-#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_I8259_H */
diff --git a/include/asm-powerpc/ibmebus.h b/arch/powerpc/include/asm/ibmebus.h
index 1a9d9aea21f..1a9d9aea21f 100644
--- a/include/asm-powerpc/ibmebus.h
+++ b/arch/powerpc/include/asm/ibmebus.h
diff --git a/arch/powerpc/include/asm/ide.h b/arch/powerpc/include/asm/ide.h
new file mode 100644
index 00000000000..da01b20aea5
--- /dev/null
+++ b/arch/powerpc/include/asm/ide.h
@@ -0,0 +1,17 @@
+/*
+ *  Copyright (C) 1994-1996 Linus Torvalds & authors
+ *
+ *  This file contains the powerpc architecture specific IDE code.
+ */
+#ifndef _ASM_POWERPC_IDE_H
+#define _ASM_POWERPC_IDE_H
+
+#include <linux/compiler.h>
+#include <asm/io.h>
+
+#define __ide_mm_insw(p, a, c)	readsw((void __iomem *)(p), (a), (c))
+#define __ide_mm_insl(p, a, c)	readsl((void __iomem *)(p), (a), (c))
+#define __ide_mm_outsw(p, a, c)	writesw((void __iomem *)(p), (a), (c))
+#define __ide_mm_outsl(p, a, c)	writesl((void __iomem *)(p), (a), (c))
+
+#endif /* _ASM_POWERPC_IDE_H */
diff --git a/include/asm-powerpc/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
index 0f165e59c32..0f165e59c32 100644
--- a/include/asm-powerpc/immap_86xx.h
+++ b/arch/powerpc/include/asm/immap_86xx.h
diff --git a/include/asm-powerpc/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h
index 4080bab0468..4080bab0468 100644
--- a/include/asm-powerpc/immap_cpm2.h
+++ b/arch/powerpc/include/asm/immap_cpm2.h
diff --git a/include/asm-powerpc/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
index 7b6f411db3e..3c2fced3ac2 100644
--- a/include/asm-powerpc/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/immap_qe.h
- *
  * QUICC Engine (QE) Internal Memory Map.
  * The Internal Memory Map for devices with QE on them. This
  * is the superset of all QE devices (8360, etc.).
diff --git a/include/asm-powerpc/io-defs.h b/arch/powerpc/include/asm/io-defs.h
index 44d7927aec6..44d7927aec6 100644
--- a/include/asm-powerpc/io-defs.h
+++ b/arch/powerpc/include/asm/io-defs.h
diff --git a/include/asm-powerpc/io.h b/arch/powerpc/include/asm/io.h
index 77c7fa025e6..77c7fa025e6 100644
--- a/include/asm-powerpc/io.h
+++ b/arch/powerpc/include/asm/io.h
diff --git a/include/asm-powerpc/ioctl.h b/arch/powerpc/include/asm/ioctl.h
index 57d68304218..57d68304218 100644
--- a/include/asm-powerpc/ioctl.h
+++ b/arch/powerpc/include/asm/ioctl.h
diff --git a/include/asm-powerpc/ioctls.h b/arch/powerpc/include/asm/ioctls.h
index 279a6229584..279a6229584 100644
--- a/include/asm-powerpc/ioctls.h
+++ b/arch/powerpc/include/asm/ioctls.h
diff --git a/include/asm-powerpc/iommu.h b/arch/powerpc/include/asm/iommu.h
index 51ecfef8d84..51ecfef8d84 100644
--- a/include/asm-powerpc/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
diff --git a/include/asm-powerpc/ipcbuf.h b/arch/powerpc/include/asm/ipcbuf.h
index 2c3e1d94db1..2c3e1d94db1 100644
--- a/include/asm-powerpc/ipcbuf.h
+++ b/arch/powerpc/include/asm/ipcbuf.h
diff --git a/include/asm-powerpc/ipic.h b/arch/powerpc/include/asm/ipic.h
index 8ff08be0014..fb59829983b 100644
--- a/include/asm-powerpc/ipic.h
+++ b/arch/powerpc/include/asm/ipic.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/ipic.h
- *
  * IPIC external definitions and structure.
  *
  * Maintainer: Kumar Gala <galak@kernel.crashing.org>
@@ -79,15 +77,8 @@ extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
 extern u32 ipic_get_mcp_status(void);
 extern void ipic_clear_mcp_status(u32 mask);
 
-#ifdef CONFIG_PPC_MERGE
 extern struct ipic * ipic_init(struct device_node *node, unsigned int flags);
 extern unsigned int ipic_get_irq(void);
-#else
-extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
-		unsigned int irq_offset,
-		unsigned char *senses, unsigned int senses_count);
-extern int ipic_get_irq(void);
-#endif
 
 #endif /* __ASM_IPIC_H__ */
 #endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/irq.h b/arch/powerpc/include/asm/irq.h
index 1ef8e304e0e..a372f76836c 100644
--- a/include/asm-powerpc/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -25,8 +25,6 @@
 
 extern atomic_t ppc_n_lost_interrupts;
 
-#ifdef CONFIG_PPC_MERGE
-
 /* This number is used when no interrupt has been assigned */
 #define NO_IRQ			(0)
 
@@ -326,292 +324,6 @@ static __inline__ int irq_canonicalize(int irq)
 	return irq;
 }
 
-
-#else /* CONFIG_PPC_MERGE */
-
-/* This number is used when no interrupt has been assigned */
-#define NO_IRQ			(-1)
-#define NO_IRQ_IGNORE		(-2)
-
-
-/*
- * These constants are used for passing information about interrupt
- * signal polarity and level/edge sensing to the low-level PIC chip
- * drivers.
- */
-#define IRQ_SENSE_MASK		0x1
-#define IRQ_SENSE_LEVEL		0x1	/* interrupt on active level */
-#define IRQ_SENSE_EDGE		0x0	/* interrupt triggered by edge */
-
-#define IRQ_POLARITY_MASK	0x2
-#define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
-#define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
-
-
-#if defined(CONFIG_40x)
-#include <asm/ibm4xx.h>
-
-#ifndef NR_BOARD_IRQS
-#define NR_BOARD_IRQS 0
-#endif
-
-#ifndef UIC_WIDTH /* Number of interrupts per device */
-#define UIC_WIDTH 32
-#endif
-
-#ifndef NR_UICS /* number  of UIC devices */
-#define NR_UICS 1
-#endif
-
-#if defined (CONFIG_403)
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#define	NR_AIC_IRQS 32
-#define	NR_IRQS	 (NR_AIC_IRQS + NR_BOARD_IRQS)
-
-#elif !defined (CONFIG_403)
-
-/*
- *  The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
- * possible interrupts as well. There are seven, configurable external
- * interrupt pins and there are 17 internal interrupts for the on-chip
- * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
- *
- */
-
-
-#define NR_UIC_IRQS UIC_WIDTH
-#define NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-#endif
-
-#elif defined(CONFIG_44x)
-#include <asm/ibm44x.h>
-
-#define	NR_UIC_IRQS	32
-#define	NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-
-#elif defined(CONFIG_8xx)
-
-/* Now include the board configuration specific associations.
-*/
-#include <asm/mpc8xx.h>
-
-/* The MPC8xx cores have 16 possible interrupts.  There are eight
- * possible level sensitive interrupts assigned and generated internally
- * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
- * There are eight external interrupts (IRQs) that can be configured
- * as either level or edge sensitive.
- *
- * On some implementations, there is also the possibility of an 8259
- * through the PCI and PCI-ISA bridges.
- *
- * We are "flattening" the interrupt vectors of the cascaded CPM
- * and 8259 interrupt controllers so that we can uniquely identify
- * any interrupt source with a single integer.
- */
-#define NR_SIU_INTS	16
-#define NR_CPM_INTS	32
-#ifndef NR_8259_INTS
-#define NR_8259_INTS 0
-#endif
-
-#define SIU_IRQ_OFFSET		0
-#define CPM_IRQ_OFFSET		(SIU_IRQ_OFFSET + NR_SIU_INTS)
-#define I8259_IRQ_OFFSET	(CPM_IRQ_OFFSET + NR_CPM_INTS)
-
-#define NR_IRQS	(NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
-
-/* These values must be zero-based and map 1:1 with the SIU configuration.
- * They are used throughout the 8xx I/O subsystem to generate
- * interrupt masks, flags, and other control patterns.  This is why the
- * current kernel assumption of the 8259 as the base controller is such
- * a pain in the butt.
- */
-#define	SIU_IRQ0	(0)	/* Highest priority */
-#define	SIU_LEVEL0	(1)
-#define	SIU_IRQ1	(2)
-#define	SIU_LEVEL1	(3)
-#define	SIU_IRQ2	(4)
-#define	SIU_LEVEL2	(5)
-#define	SIU_IRQ3	(6)
-#define	SIU_LEVEL3	(7)
-#define	SIU_IRQ4	(8)
-#define	SIU_LEVEL4	(9)
-#define	SIU_IRQ5	(10)
-#define	SIU_LEVEL5	(11)
-#define	SIU_IRQ6	(12)
-#define	SIU_LEVEL6	(13)
-#define	SIU_IRQ7	(14)
-#define	SIU_LEVEL7	(15)
-
-#define MPC8xx_INT_FEC1		SIU_LEVEL1
-#define MPC8xx_INT_FEC2		SIU_LEVEL3
-
-#define MPC8xx_INT_SCC1		(CPM_IRQ_OFFSET + CPMVEC_SCC1)
-#define MPC8xx_INT_SCC2		(CPM_IRQ_OFFSET + CPMVEC_SCC2)
-#define MPC8xx_INT_SCC3		(CPM_IRQ_OFFSET + CPMVEC_SCC3)
-#define MPC8xx_INT_SCC4		(CPM_IRQ_OFFSET + CPMVEC_SCC4)
-#define MPC8xx_INT_SMC1		(CPM_IRQ_OFFSET + CPMVEC_SMC1)
-#define MPC8xx_INT_SMC2		(CPM_IRQ_OFFSET + CPMVEC_SMC2)
-
-/* The internal interrupts we can configure as we see fit.
- * My personal preference is CPM at level 2, which puts it above the
- * MBX PCI/ISA/IDE interrupts.
- */
-#ifndef PIT_INTERRUPT
-#define PIT_INTERRUPT		SIU_LEVEL0
-#endif
-#ifndef	CPM_INTERRUPT
-#define CPM_INTERRUPT		SIU_LEVEL2
-#endif
-#ifndef	PCMCIA_INTERRUPT
-#define PCMCIA_INTERRUPT	SIU_LEVEL6
-#endif
-#ifndef	DEC_INTERRUPT
-#define DEC_INTERRUPT		SIU_LEVEL7
-#endif
-
-/* Some internal interrupt registers use an 8-bit mask for the interrupt
- * level instead of a number.
- */
-#define	mk_int_int_mask(IL) (1 << (7 - (IL/2)))
-
-#else /* CONFIG_40x + CONFIG_8xx */
-/*
- * this is the # irq's for all ppc arch's (pmac/chrp/prep)
- * so it is the max of them all
- */
-#define NR_IRQS			256
-#define __DO_IRQ_CANON	1
-
-#ifndef CONFIG_8260
-
-#define NUM_8259_INTERRUPTS	16
-
-#else /* CONFIG_8260 */
-
-/* The 8260 has an internal interrupt controller with a maximum of
- * 64 IRQs.  We will use NR_IRQs from above since it is large enough.
- * Don't be confused by the 8260 documentation where they list an
- * "interrupt number" and "interrupt vector".  We are only interested
- * in the interrupt vector.  There are "reserved" holes where the
- * vector number increases, but the interrupt number in the table does not.
- * (Document errata updates have fixed this...make sure you have up to
- * date processor documentation -- Dan).
- */
-
-#ifndef CPM_IRQ_OFFSET
-#define CPM_IRQ_OFFSET	0
-#endif
-
-#define NR_CPM_INTS	64
-
-#define	SIU_INT_ERROR		((uint)0x00 + CPM_IRQ_OFFSET)
-#define	SIU_INT_I2C		((uint)0x01 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SPI		((uint)0x02 + CPM_IRQ_OFFSET)
-#define	SIU_INT_RISC		((uint)0x03 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SMC1		((uint)0x04 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SMC2		((uint)0x05 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA1		((uint)0x06 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA2		((uint)0x07 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA3		((uint)0x08 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA4		((uint)0x09 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SDMA		((uint)0x0a + CPM_IRQ_OFFSET)
-#define	SIU_INT_USB		((uint)0x0b + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER1		((uint)0x0c + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER2		((uint)0x0d + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER3		((uint)0x0e + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER4		((uint)0x0f + CPM_IRQ_OFFSET)
-#define	SIU_INT_TMCNT		((uint)0x10 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PIT		((uint)0x11 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PCI		((uint)0x12 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ1		((uint)0x13 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ2		((uint)0x14 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ3		((uint)0x15 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ4		((uint)0x16 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ5		((uint)0x17 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ6		((uint)0x18 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ7		((uint)0x19 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC1		((uint)0x20 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC2		((uint)0x21 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC3		((uint)0x22 + CPM_IRQ_OFFSET)
-#define	SIU_INT_MCC1		((uint)0x24 + CPM_IRQ_OFFSET)
-#define	SIU_INT_MCC2		((uint)0x25 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC1		((uint)0x28 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC2		((uint)0x29 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC3		((uint)0x2a + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC4		((uint)0x2b + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC15		((uint)0x30 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC14		((uint)0x31 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC13		((uint)0x32 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC12		((uint)0x33 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC11		((uint)0x34 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC10		((uint)0x35 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC9		((uint)0x36 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC8		((uint)0x37 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC7		((uint)0x38 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC6		((uint)0x39 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC5		((uint)0x3a + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC4		((uint)0x3b + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC3		((uint)0x3c + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC2		((uint)0x3d + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC1		((uint)0x3e + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC0		((uint)0x3f + CPM_IRQ_OFFSET)
-
-#endif /* CONFIG_8260 */
-
-#endif /* Whatever way too big #ifdef */
-
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-/* pedantic: these are long because they are used with set_bit --RR */
-extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-
-/*
- * Because many systems have two overlapping names spaces for
- * interrupts (ISA and XICS for example), and the ISA interrupts
- * have historically not been easy to renumber, we allow ISA
- * interrupts to take values 0 - 15, and shift up the remaining
- * interrupts by 0x10.
- */
-#define NUM_ISA_INTERRUPTS	0x10
-extern int __irq_offset_value;
-
-static inline int irq_offset_up(int irq)
-{
-	return(irq + __irq_offset_value);
-}
-
-static inline int irq_offset_down(int irq)
-{
-	return(irq - __irq_offset_value);
-}
-
-static inline int irq_offset_value(void)
-{
-	return __irq_offset_value;
-}
-
-#ifdef __DO_IRQ_CANON
-extern int ppc_do_canonicalize_irqs;
-#else
-#define ppc_do_canonicalize_irqs	0
-#endif
-
-static __inline__ int irq_canonicalize(int irq)
-{
-	if (ppc_do_canonicalize_irqs && irq == 2)
-		irq = 9;
-	return irq;
-}
-#endif /* CONFIG_PPC_MERGE */
-
 extern int distribute_irqs;
 
 struct irqaction;
diff --git a/include/asm-powerpc/irq_regs.h b/arch/powerpc/include/asm/irq_regs.h
index ba94b51a0a7..ba94b51a0a7 100644
--- a/include/asm-powerpc/irq_regs.h
+++ b/arch/powerpc/include/asm/irq_regs.h
diff --git a/include/asm-powerpc/irqflags.h b/arch/powerpc/include/asm/irqflags.h
index cc6fdba3366..5f68ecfdf51 100644
--- a/include/asm-powerpc/irqflags.h
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/irqflags.h
- *
  * IRQ flags handling
  */
 #ifndef _ASM_IRQFLAGS_H
@@ -10,7 +8,7 @@
 /*
  * Get definitions for raw_local_save_flags(x), etc.
  */
-#include <asm-powerpc/hw_irq.h>
+#include <asm/hw_irq.h>
 
 #else
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -22,7 +20,7 @@
 #define TRACE_ENABLE_INTS	bl .trace_hardirqs_on
 #define TRACE_DISABLE_INTS	bl .trace_hardirqs_off
 #define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)	\
-	cmpdi	en, 0;				\
+	cmpdi	en,0;				\
 	bne	95f;				\
 	stb	en,PACASOFTIRQEN(r13);		\
 	bl	.trace_hardirqs_off;		\
@@ -31,7 +29,8 @@
 	li	en,1;
 #define TRACE_AND_RESTORE_IRQ(en)		\
 	TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f);	\
-96:	stb	en,PACASOFTIRQEN(r13)
+	stb	en,PACASOFTIRQEN(r13);	        \
+96:
 #else
 #define TRACE_ENABLE_INTS
 #define TRACE_DISABLE_INTS
diff --git a/include/asm-powerpc/iseries/alpaca.h b/arch/powerpc/include/asm/iseries/alpaca.h
index c0cce6727a6..c0cce6727a6 100644
--- a/include/asm-powerpc/iseries/alpaca.h
+++ b/arch/powerpc/include/asm/iseries/alpaca.h
diff --git a/include/asm-powerpc/iseries/hv_call.h b/arch/powerpc/include/asm/iseries/hv_call.h
index 162d653ad51..162d653ad51 100644
--- a/include/asm-powerpc/iseries/hv_call.h
+++ b/arch/powerpc/include/asm/iseries/hv_call.h
diff --git a/include/asm-powerpc/iseries/hv_call_event.h b/arch/powerpc/include/asm/iseries/hv_call_event.h
index cc029d388e1..cc029d388e1 100644
--- a/include/asm-powerpc/iseries/hv_call_event.h
+++ b/arch/powerpc/include/asm/iseries/hv_call_event.h
diff --git a/include/asm-powerpc/iseries/hv_call_sc.h b/arch/powerpc/include/asm/iseries/hv_call_sc.h
index f5d21095925..f5d21095925 100644
--- a/include/asm-powerpc/iseries/hv_call_sc.h
+++ b/arch/powerpc/include/asm/iseries/hv_call_sc.h
diff --git a/include/asm-powerpc/iseries/hv_call_xm.h b/arch/powerpc/include/asm/iseries/hv_call_xm.h
index 392ac3f54df..392ac3f54df 100644
--- a/include/asm-powerpc/iseries/hv_call_xm.h
+++ b/arch/powerpc/include/asm/iseries/hv_call_xm.h
diff --git a/include/asm-powerpc/iseries/hv_lp_config.h b/arch/powerpc/include/asm/iseries/hv_lp_config.h
index a006fd1e4a2..a006fd1e4a2 100644
--- a/include/asm-powerpc/iseries/hv_lp_config.h
+++ b/arch/powerpc/include/asm/iseries/hv_lp_config.h
diff --git a/include/asm-powerpc/iseries/hv_lp_event.h b/arch/powerpc/include/asm/iseries/hv_lp_event.h
index 8f5da7d7720..8f5da7d7720 100644
--- a/include/asm-powerpc/iseries/hv_lp_event.h
+++ b/arch/powerpc/include/asm/iseries/hv_lp_event.h
diff --git a/include/asm-powerpc/iseries/hv_types.h b/arch/powerpc/include/asm/iseries/hv_types.h
index c3e6d2a1d1c..c3e6d2a1d1c 100644
--- a/include/asm-powerpc/iseries/hv_types.h
+++ b/arch/powerpc/include/asm/iseries/hv_types.h
diff --git a/include/asm-powerpc/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h
index c59ee7e4bed..c59ee7e4bed 100644
--- a/include/asm-powerpc/iseries/iommu.h
+++ b/arch/powerpc/include/asm/iseries/iommu.h
diff --git a/include/asm-powerpc/iseries/it_lp_queue.h b/arch/powerpc/include/asm/iseries/it_lp_queue.h
index 42827883882..42827883882 100644
--- a/include/asm-powerpc/iseries/it_lp_queue.h
+++ b/arch/powerpc/include/asm/iseries/it_lp_queue.h
diff --git a/include/asm-powerpc/iseries/lpar_map.h b/arch/powerpc/include/asm/iseries/lpar_map.h
index 5e9f3e128ee..5e9f3e128ee 100644
--- a/include/asm-powerpc/iseries/lpar_map.h
+++ b/arch/powerpc/include/asm/iseries/lpar_map.h
diff --git a/include/asm-powerpc/iseries/mf.h b/arch/powerpc/include/asm/iseries/mf.h
index eb851a9c9e5..eb851a9c9e5 100644
--- a/include/asm-powerpc/iseries/mf.h
+++ b/arch/powerpc/include/asm/iseries/mf.h
diff --git a/include/asm-powerpc/iseries/vio.h b/arch/powerpc/include/asm/iseries/vio.h
index f9ac0d00b95..f9ac0d00b95 100644
--- a/include/asm-powerpc/iseries/vio.h
+++ b/arch/powerpc/include/asm/iseries/vio.h
diff --git a/include/asm-powerpc/kdebug.h b/arch/powerpc/include/asm/kdebug.h
index ae6d206728a..ae6d206728a 100644
--- a/include/asm-powerpc/kdebug.h
+++ b/arch/powerpc/include/asm/kdebug.h
diff --git a/include/asm-powerpc/kdump.h b/arch/powerpc/include/asm/kdump.h
index f6c93c71689..f6c93c71689 100644
--- a/include/asm-powerpc/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
diff --git a/include/asm-powerpc/kexec.h b/arch/powerpc/include/asm/kexec.h
index acdcdc66f1b..3736d9b3328 100644
--- a/include/asm-powerpc/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -22,7 +22,7 @@
 #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
 #endif
 
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
 
 /* The native architecture */
 #ifdef __powerpc64__
diff --git a/include/asm-powerpc/keylargo.h b/arch/powerpc/include/asm/keylargo.h
index d8520ef121f..d8520ef121f 100644
--- a/include/asm-powerpc/keylargo.h
+++ b/arch/powerpc/include/asm/keylargo.h
diff --git a/include/asm-powerpc/kgdb.h b/arch/powerpc/include/asm/kgdb.h
index 1399caf719a..edd217006d2 100644
--- a/include/asm-powerpc/kgdb.h
+++ b/arch/powerpc/include/asm/kgdb.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/kgdb.h
- *
  * The PowerPC (32/64) specific defines / externs for KGDB.  Based on
  * the previous 32bit and 64bit specific files, which had the following
  * copyrights:
diff --git a/include/asm-powerpc/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h
index b6bac6f61c1..b6bac6f61c1 100644
--- a/include/asm-powerpc/kmap_types.h
+++ b/arch/powerpc/include/asm/kmap_types.h
diff --git a/include/asm-powerpc/kprobes.h b/arch/powerpc/include/asm/kprobes.h
index d0e7701fa1f..d0e7701fa1f 100644
--- a/include/asm-powerpc/kprobes.h
+++ b/arch/powerpc/include/asm/kprobes.h
diff --git a/include/asm-powerpc/kvm.h b/arch/powerpc/include/asm/kvm.h
index f993e4198d5..f993e4198d5 100644
--- a/include/asm-powerpc/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
diff --git a/include/asm-powerpc/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index 2197764796d..2197764796d 100644
--- a/include/asm-powerpc/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
diff --git a/include/asm-powerpc/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 2655e2a4831..2655e2a4831 100644
--- a/include/asm-powerpc/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
diff --git a/include/asm-powerpc/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
index 2d48f6a63d0..2d48f6a63d0 100644
--- a/include/asm-powerpc/kvm_para.h
+++ b/arch/powerpc/include/asm/kvm_para.h
diff --git a/include/asm-powerpc/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index a8b06879226..a8b06879226 100644
--- a/include/asm-powerpc/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
diff --git a/include/asm-powerpc/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h
index 4d8518049f4..4d8518049f4 100644
--- a/include/asm-powerpc/libata-portmap.h
+++ b/arch/powerpc/include/asm/libata-portmap.h
diff --git a/include/asm-powerpc/linkage.h b/arch/powerpc/include/asm/linkage.h
index e1c4ac1cc4b..e1c4ac1cc4b 100644
--- a/include/asm-powerpc/linkage.h
+++ b/arch/powerpc/include/asm/linkage.h
diff --git a/include/asm-powerpc/lmb.h b/arch/powerpc/include/asm/lmb.h
index 6f5fdf0a19a..6f5fdf0a19a 100644
--- a/include/asm-powerpc/lmb.h
+++ b/arch/powerpc/include/asm/lmb.h
diff --git a/include/asm-powerpc/local.h b/arch/powerpc/include/asm/local.h
index 612d8327665..612d8327665 100644
--- a/include/asm-powerpc/local.h
+++ b/arch/powerpc/include/asm/local.h
diff --git a/include/asm-powerpc/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index 2fe268b1033..2fe268b1033 100644
--- a/include/asm-powerpc/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
diff --git a/include/asm-powerpc/lv1call.h b/arch/powerpc/include/asm/lv1call.h
index 81713acf752..81713acf752 100644
--- a/include/asm-powerpc/lv1call.h
+++ b/arch/powerpc/include/asm/lv1call.h
diff --git a/include/asm-powerpc/machdep.h b/arch/powerpc/include/asm/machdep.h
index 893aafd87fd..893aafd87fd 100644
--- a/include/asm-powerpc/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
diff --git a/include/asm-powerpc/macio.h b/arch/powerpc/include/asm/macio.h
index 079c06eae44..079c06eae44 100644
--- a/include/asm-powerpc/macio.h
+++ b/arch/powerpc/include/asm/macio.h
diff --git a/include/asm-powerpc/mc146818rtc.h b/arch/powerpc/include/asm/mc146818rtc.h
index f2741c8b59a..f2741c8b59a 100644
--- a/include/asm-powerpc/mc146818rtc.h
+++ b/arch/powerpc/include/asm/mc146818rtc.h
diff --git a/include/asm-powerpc/mediabay.h b/arch/powerpc/include/asm/mediabay.h
index b2efb332580..b2efb332580 100644
--- a/include/asm-powerpc/mediabay.h
+++ b/arch/powerpc/include/asm/mediabay.h
diff --git a/include/asm-powerpc/mman.h b/arch/powerpc/include/asm/mman.h
index 9209f755763..9209f755763 100644
--- a/include/asm-powerpc/mman.h
+++ b/arch/powerpc/include/asm/mman.h
diff --git a/include/asm-powerpc/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h
index 3d108676584..3d108676584 100644
--- a/include/asm-powerpc/mmu-40x.h
+++ b/arch/powerpc/include/asm/mmu-40x.h
diff --git a/include/asm-powerpc/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
index a825524c981..a825524c981 100644
--- a/include/asm-powerpc/mmu-44x.h
+++ b/arch/powerpc/include/asm/mmu-44x.h
diff --git a/include/asm-powerpc/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
index 9db877eb88d..9db877eb88d 100644
--- a/include/asm-powerpc/mmu-8xx.h
+++ b/arch/powerpc/include/asm/mmu-8xx.h
diff --git a/include/asm-powerpc/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h
index 925d93cf64d..925d93cf64d 100644
--- a/include/asm-powerpc/mmu-fsl-booke.h
+++ b/arch/powerpc/include/asm/mmu-fsl-booke.h
diff --git a/include/asm-powerpc/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h
index 16b1a1e77e6..16b1a1e77e6 100644
--- a/include/asm-powerpc/mmu-hash32.h
+++ b/arch/powerpc/include/asm/mmu-hash32.h
diff --git a/include/asm-powerpc/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 19c7a940349..c2df53c5ceb 100644
--- a/include/asm-powerpc/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -278,7 +278,7 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
 			  unsigned long trap);
 
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
-			     unsigned long pstart, unsigned long mode,
+			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
 extern void set_huge_psize(int psize);
 extern void add_gpage(unsigned long addr, unsigned long page_size,
diff --git a/include/asm-powerpc/mmu.h b/arch/powerpc/include/asm/mmu.h
index 4c0e1b4f975..4c0e1b4f975 100644
--- a/include/asm-powerpc/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
diff --git a/include/asm-powerpc/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 9102b8bf0ea..6b993ef452f 100644
--- a/include/asm-powerpc/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -147,7 +147,6 @@ static inline void get_mmu_context(struct mm_struct *mm)
 static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
 {
 	mm->context.id = NO_CONTEXT;
-	mm->context.vdso_base = 0;
 	return 0;
 }
 
diff --git a/include/asm-powerpc/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index 19f299b7e25..19f299b7e25 100644
--- a/include/asm-powerpc/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
diff --git a/include/asm-powerpc/module.h b/arch/powerpc/include/asm/module.h
index e5f14b13ccf..e5f14b13ccf 100644
--- a/include/asm-powerpc/module.h
+++ b/arch/powerpc/include/asm/module.h
diff --git a/include/asm-powerpc/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h
index c48a1658eea..c48a1658eea 100644
--- a/include/asm-powerpc/mpc512x.h
+++ b/arch/powerpc/include/asm/mpc512x.h
diff --git a/include/asm-powerpc/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 81ef10b6b67..81ef10b6b67 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
diff --git a/include/asm-powerpc/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index 8917ed63056..8917ed63056 100644
--- a/include/asm-powerpc/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
diff --git a/include/asm-powerpc/mpc6xx.h b/arch/powerpc/include/asm/mpc6xx.h
index effc2291beb..effc2291beb 100644
--- a/include/asm-powerpc/mpc6xx.h
+++ b/arch/powerpc/include/asm/mpc6xx.h
diff --git a/include/asm-powerpc/mpc8260.h b/arch/powerpc/include/asm/mpc8260.h
index 03317e1e618..03317e1e618 100644
--- a/include/asm-powerpc/mpc8260.h
+++ b/arch/powerpc/include/asm/mpc8260.h
diff --git a/include/asm-powerpc/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h
index 15f650f987e..15f650f987e 100644
--- a/include/asm-powerpc/mpc86xx.h
+++ b/arch/powerpc/include/asm/mpc86xx.h
diff --git a/include/asm-powerpc/mpc8xx.h b/arch/powerpc/include/asm/mpc8xx.h
index 98f3c4f1732..98f3c4f1732 100644
--- a/include/asm-powerpc/mpc8xx.h
+++ b/arch/powerpc/include/asm/mpc8xx.h
diff --git a/include/asm-powerpc/mpic.h b/arch/powerpc/include/asm/mpic.h
index fe566a348a8..fe566a348a8 100644
--- a/include/asm-powerpc/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
diff --git a/include/asm-powerpc/msgbuf.h b/arch/powerpc/include/asm/msgbuf.h
index dd76743c753..dd76743c753 100644
--- a/include/asm-powerpc/msgbuf.h
+++ b/arch/powerpc/include/asm/msgbuf.h
diff --git a/include/asm-powerpc/mutex.h b/arch/powerpc/include/asm/mutex.h
index 458c1f7fbc1..458c1f7fbc1 100644
--- a/include/asm-powerpc/mutex.h
+++ b/arch/powerpc/include/asm/mutex.h
diff --git a/include/asm-powerpc/nvram.h b/arch/powerpc/include/asm/nvram.h
index efde5ac82f7..efde5ac82f7 100644
--- a/include/asm-powerpc/nvram.h
+++ b/arch/powerpc/include/asm/nvram.h
diff --git a/include/asm-powerpc/of_device.h b/arch/powerpc/include/asm/of_device.h
index 3c123990ca2..3c123990ca2 100644
--- a/include/asm-powerpc/of_device.h
+++ b/arch/powerpc/include/asm/of_device.h
diff --git a/include/asm-powerpc/of_platform.h b/arch/powerpc/include/asm/of_platform.h
index 18659ef7213..18659ef7213 100644
--- a/include/asm-powerpc/of_platform.h
+++ b/arch/powerpc/include/asm/of_platform.h
diff --git a/include/asm-powerpc/ohare.h b/arch/powerpc/include/asm/ohare.h
index 0d030f9dea2..0d030f9dea2 100644
--- a/include/asm-powerpc/ohare.h
+++ b/arch/powerpc/include/asm/ohare.h
diff --git a/include/asm-powerpc/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h
index 95035c602ba..95035c602ba 100644
--- a/include/asm-powerpc/oprofile_impl.h
+++ b/arch/powerpc/include/asm/oprofile_impl.h
diff --git a/include/asm-powerpc/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h
index e482e5352e6..e482e5352e6 100644
--- a/include/asm-powerpc/pSeries_reconfig.h
+++ b/arch/powerpc/include/asm/pSeries_reconfig.h
diff --git a/include/asm-powerpc/paca.h b/arch/powerpc/include/asm/paca.h
index 7b564444ff6..6493a395508 100644
--- a/include/asm-powerpc/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/paca.h
- *
  * This control block defines the PACA which defines the processor
  * specific data for each logical processor on the system.
  * There are some pointers defined that are utilized by PLIC.
diff --git a/include/asm-powerpc/page.h b/arch/powerpc/include/asm/page.h
index e088545cb3f..e088545cb3f 100644
--- a/include/asm-powerpc/page.h
+++ b/arch/powerpc/include/asm/page.h
diff --git a/include/asm-powerpc/page_32.h b/arch/powerpc/include/asm/page_32.h
index ebfae530a37..ebfae530a37 100644
--- a/include/asm-powerpc/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
diff --git a/include/asm-powerpc/page_64.h b/arch/powerpc/include/asm/page_64.h
index 043bfdfe4f7..043bfdfe4f7 100644
--- a/include/asm-powerpc/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
diff --git a/include/asm-powerpc/param.h b/arch/powerpc/include/asm/param.h
index 094f63d4d5c..094f63d4d5c 100644
--- a/include/asm-powerpc/param.h
+++ b/arch/powerpc/include/asm/param.h
diff --git a/include/asm-powerpc/parport.h b/arch/powerpc/include/asm/parport.h
index 414c50e2e88..414c50e2e88 100644
--- a/include/asm-powerpc/parport.h
+++ b/arch/powerpc/include/asm/parport.h
diff --git a/include/asm-powerpc/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h
index 19fd7933e2d..19fd7933e2d 100644
--- a/include/asm-powerpc/pasemi_dma.h
+++ b/arch/powerpc/include/asm/pasemi_dma.h
diff --git a/include/asm-powerpc/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index ae2ea803a0f..ae2ea803a0f 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
diff --git a/include/asm-powerpc/pci.h b/arch/powerpc/include/asm/pci.h
index a05a942b1c2..a05a942b1c2 100644
--- a/include/asm-powerpc/pci.h
+++ b/arch/powerpc/include/asm/pci.h
diff --git a/include/asm-powerpc/percpu.h b/arch/powerpc/include/asm/percpu.h
index f879252b7ea..f879252b7ea 100644
--- a/include/asm-powerpc/percpu.h
+++ b/arch/powerpc/include/asm/percpu.h
diff --git a/include/asm-powerpc/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 58c07147b3e..58c07147b3e 100644
--- a/include/asm-powerpc/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
diff --git a/include/asm-powerpc/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index 812a1d8f35c..812a1d8f35c 100644
--- a/include/asm-powerpc/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
diff --git a/include/asm-powerpc/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index b4505ed0f0f..b4505ed0f0f 100644
--- a/include/asm-powerpc/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
diff --git a/include/asm-powerpc/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h
index 6b18ba9d2d8..6b18ba9d2d8 100644
--- a/include/asm-powerpc/pgtable-4k.h
+++ b/arch/powerpc/include/asm/pgtable-4k.h
diff --git a/include/asm-powerpc/pgtable-64k.h b/arch/powerpc/include/asm/pgtable-64k.h
index 07b0d8f09cb..07b0d8f09cb 100644
--- a/include/asm-powerpc/pgtable-64k.h
+++ b/arch/powerpc/include/asm/pgtable-64k.h
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 6fe39e32704..6fe39e32704 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 5fc78c0be30..4597c491e9b 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -100,7 +100,7 @@
 
 #define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY)
 
-/* __pgprot defined in asm-powerpc/page.h */
+/* __pgprot defined in arch/powerpc/incliude/asm/page.h */
 #define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
 
 #define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
@@ -153,12 +153,10 @@
 #define __S110	PAGE_SHARED_X
 #define __S111	PAGE_SHARED_X
 
-#ifdef CONFIG_HUGETLB_PAGE
-
+#ifdef CONFIG_PPC_MM_SLICES
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif
+#endif /* CONFIG_PPC_MM_SLICES */
 
 #ifndef __ASSEMBLY__
 
@@ -461,6 +459,8 @@ void pgtable_cache_init(void);
 	return pt;
 }
 
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/include/asm-powerpc/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index dbb8ca172e4..dbb8ca172e4 100644
--- a/include/asm-powerpc/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
diff --git a/include/asm-powerpc/phyp_dump.h b/arch/powerpc/include/asm/phyp_dump.h
index fa74c6c3e10..fa74c6c3e10 100644
--- a/include/asm-powerpc/phyp_dump.h
+++ b/arch/powerpc/include/asm/phyp_dump.h
diff --git a/include/asm-powerpc/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h
index 877c35a4356..877c35a4356 100644
--- a/include/asm-powerpc/pmac_feature.h
+++ b/arch/powerpc/include/asm/pmac_feature.h
diff --git a/include/asm-powerpc/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h
index 131011bd7e7..131011bd7e7 100644
--- a/include/asm-powerpc/pmac_low_i2c.h
+++ b/arch/powerpc/include/asm/pmac_low_i2c.h
diff --git a/include/asm-powerpc/pmac_pfunc.h b/arch/powerpc/include/asm/pmac_pfunc.h
index 1330d6a58c5..1330d6a58c5 100644
--- a/include/asm-powerpc/pmac_pfunc.h
+++ b/arch/powerpc/include/asm/pmac_pfunc.h
diff --git a/include/asm-powerpc/pmc.h b/arch/powerpc/include/asm/pmc.h
index d6a616a1b3e..d6a616a1b3e 100644
--- a/include/asm-powerpc/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
diff --git a/include/asm-powerpc/pmi.h b/arch/powerpc/include/asm/pmi.h
index b4e91fbf508..b4e91fbf508 100644
--- a/include/asm-powerpc/pmi.h
+++ b/arch/powerpc/include/asm/pmi.h
diff --git a/include/asm-powerpc/poll.h b/arch/powerpc/include/asm/poll.h
index c98509d3149..c98509d3149 100644
--- a/include/asm-powerpc/poll.h
+++ b/arch/powerpc/include/asm/poll.h
diff --git a/include/asm-powerpc/posix_types.h b/arch/powerpc/include/asm/posix_types.h
index c4e396b540d..c4e396b540d 100644
--- a/include/asm-powerpc/posix_types.h
+++ b/arch/powerpc/include/asm/posix_types.h
diff --git a/include/asm-powerpc/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 854ab713f56..854ab713f56 100644
--- a/include/asm-powerpc/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
diff --git a/include/asm-powerpc/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h
index 033039a80c4..033039a80c4 100644
--- a/include/asm-powerpc/ppc4xx.h
+++ b/arch/powerpc/include/asm/ppc4xx.h
diff --git a/include/asm-powerpc/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 0966899d974..0966899d974 100644
--- a/include/asm-powerpc/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
diff --git a/include/asm-powerpc/processor.h b/arch/powerpc/include/asm/processor.h
index 101ed87f7d8..101ed87f7d8 100644
--- a/include/asm-powerpc/processor.h
+++ b/arch/powerpc/include/asm/processor.h
diff --git a/include/asm-powerpc/prom.h b/arch/powerpc/include/asm/prom.h
index eb3bd2e1c7f..eb3bd2e1c7f 100644
--- a/include/asm-powerpc/prom.h
+++ b/arch/powerpc/include/asm/prom.h
diff --git a/include/asm-powerpc/ps3.h b/arch/powerpc/include/asm/ps3.h
index f9e34c493cb..f9e34c493cb 100644
--- a/include/asm-powerpc/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
diff --git a/include/asm-powerpc/ps3av.h b/arch/powerpc/include/asm/ps3av.h
index fda98715cd3..fda98715cd3 100644
--- a/include/asm-powerpc/ps3av.h
+++ b/arch/powerpc/include/asm/ps3av.h
diff --git a/include/asm-powerpc/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h
index 3f121fe4010..3f121fe4010 100644
--- a/include/asm-powerpc/ps3fb.h
+++ b/arch/powerpc/include/asm/ps3fb.h
diff --git a/include/asm-powerpc/ps3stor.h b/arch/powerpc/include/asm/ps3stor.h
index 6fcaf714fa5..6fcaf714fa5 100644
--- a/include/asm-powerpc/ps3stor.h
+++ b/arch/powerpc/include/asm/ps3stor.h
diff --git a/include/asm-powerpc/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 734e0754fb9..734e0754fb9 100644
--- a/include/asm-powerpc/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
diff --git a/include/asm-powerpc/qe.h b/arch/powerpc/include/asm/qe.h
index edee15d269e..edee15d269e 100644
--- a/include/asm-powerpc/qe.h
+++ b/arch/powerpc/include/asm/qe.h
diff --git a/include/asm-powerpc/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
index a779b2c9eaf..56a7745ca34 100644
--- a/include/asm-powerpc/qe_ic.h
+++ b/arch/powerpc/include/asm/qe_ic.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/qe_ic.h
- *
  * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Authors: 	Shlomi Gridish <gridish@freescale.com>
diff --git a/include/asm-powerpc/reg.h b/arch/powerpc/include/asm/reg.h
index c6d1ab65077..c6d1ab65077 100644
--- a/include/asm-powerpc/reg.h
+++ b/arch/powerpc/include/asm/reg.h
diff --git a/include/asm-powerpc/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
index e8ea346b21d..e8ea346b21d 100644
--- a/include/asm-powerpc/reg_8xx.h
+++ b/arch/powerpc/include/asm/reg_8xx.h
diff --git a/include/asm-powerpc/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index be980f4ee49..be980f4ee49 100644
--- a/include/asm-powerpc/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
diff --git a/include/asm-powerpc/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 1e180a59458..1e180a59458 100644
--- a/include/asm-powerpc/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
diff --git a/include/asm-powerpc/resource.h b/arch/powerpc/include/asm/resource.h
index 04bc4db8921..04bc4db8921 100644
--- a/include/asm-powerpc/resource.h
+++ b/arch/powerpc/include/asm/resource.h
diff --git a/include/asm-powerpc/rheap.h b/arch/powerpc/include/asm/rheap.h
index 172381769cf..172381769cf 100644
--- a/include/asm-powerpc/rheap.h
+++ b/arch/powerpc/include/asm/rheap.h
diff --git a/include/asm-powerpc/rio.h b/arch/powerpc/include/asm/rio.h
index 0018bf80cb2..0018bf80cb2 100644
--- a/include/asm-powerpc/rio.h
+++ b/arch/powerpc/include/asm/rio.h
diff --git a/include/asm-powerpc/rtas.h b/arch/powerpc/include/asm/rtas.h
index 8eaa7b28d9d..8eaa7b28d9d 100644
--- a/include/asm-powerpc/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
diff --git a/include/asm-powerpc/rtc.h b/arch/powerpc/include/asm/rtc.h
index f5802926b6c..f5802926b6c 100644
--- a/include/asm-powerpc/rtc.h
+++ b/arch/powerpc/include/asm/rtc.h
diff --git a/include/asm-powerpc/rwsem.h b/arch/powerpc/include/asm/rwsem.h
index a6cc93b78b9..24cd9281ec3 100644
--- a/include/asm-powerpc/rwsem.h
+++ b/arch/powerpc/include/asm/rwsem.h
@@ -8,8 +8,8 @@
 #ifdef __KERNEL__
 
 /*
- * include/asm-powerpc/rwsem.h: R/W semaphores for PPC using the stuff
- * in lib/rwsem.c.  Adapted largely from include/asm-i386/rwsem.h
+ * R/W semaphores for PPC using the stuff in lib/rwsem.c.
+ * Adapted largely from include/asm-i386/rwsem.h
  * by Paul Mackerras <paulus@samba.org>.
  */
 
diff --git a/include/asm-powerpc/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
index fcf7d55afe4..fcf7d55afe4 100644
--- a/include/asm-powerpc/scatterlist.h
+++ b/arch/powerpc/include/asm/scatterlist.h
diff --git a/include/asm-powerpc/seccomp.h b/arch/powerpc/include/asm/seccomp.h
index 853765eb1f6..853765eb1f6 100644
--- a/include/asm-powerpc/seccomp.h
+++ b/arch/powerpc/include/asm/seccomp.h
diff --git a/include/asm-powerpc/sections.h b/arch/powerpc/include/asm/sections.h
index 916018e425c..07956f3e784 100644
--- a/include/asm-powerpc/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -2,6 +2,8 @@
 #define _ASM_POWERPC_SECTIONS_H
 #ifdef __KERNEL__
 
+#include <linux/elf.h>
+#include <linux/uaccess.h>
 #include <asm-generic/sections.h>
 
 #ifdef __powerpc64__
@@ -16,6 +18,17 @@ static inline int in_kernel_text(unsigned long addr)
 	return 0;
 }
 
+#undef dereference_function_descriptor
+static inline void *dereference_function_descriptor(void *ptr)
+{
+	struct ppc64_opd_entry *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->funcaddr, p))
+		ptr = p;
+	return ptr;
+}
+
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/sembuf.h b/arch/powerpc/include/asm/sembuf.h
index 99a41938ae3..99a41938ae3 100644
--- a/include/asm-powerpc/sembuf.h
+++ b/arch/powerpc/include/asm/sembuf.h
diff --git a/include/asm-powerpc/serial.h b/arch/powerpc/include/asm/serial.h
index 3e8589b43cb..3e8589b43cb 100644
--- a/include/asm-powerpc/serial.h
+++ b/arch/powerpc/include/asm/serial.h
diff --git a/include/asm-powerpc/setjmp.h b/arch/powerpc/include/asm/setjmp.h
index 279d03a1eec..279d03a1eec 100644
--- a/include/asm-powerpc/setjmp.h
+++ b/arch/powerpc/include/asm/setjmp.h
diff --git a/include/asm-powerpc/setup.h b/arch/powerpc/include/asm/setup.h
index 817fac0a071..817fac0a071 100644
--- a/include/asm-powerpc/setup.h
+++ b/arch/powerpc/include/asm/setup.h
diff --git a/include/asm-powerpc/shmbuf.h b/arch/powerpc/include/asm/shmbuf.h
index 8efa39698b6..8efa39698b6 100644
--- a/include/asm-powerpc/shmbuf.h
+++ b/arch/powerpc/include/asm/shmbuf.h
diff --git a/include/asm-powerpc/shmparam.h b/arch/powerpc/include/asm/shmparam.h
index 5cda42a6d39..5cda42a6d39 100644
--- a/include/asm-powerpc/shmparam.h
+++ b/arch/powerpc/include/asm/shmparam.h
diff --git a/include/asm-powerpc/sigcontext.h b/arch/powerpc/include/asm/sigcontext.h
index 9c1f24fd5d1..9c1f24fd5d1 100644
--- a/include/asm-powerpc/sigcontext.h
+++ b/arch/powerpc/include/asm/sigcontext.h
diff --git a/include/asm-powerpc/siginfo.h b/arch/powerpc/include/asm/siginfo.h
index 12f1bce037b..12f1bce037b 100644
--- a/include/asm-powerpc/siginfo.h
+++ b/arch/powerpc/include/asm/siginfo.h
diff --git a/include/asm-powerpc/signal.h b/arch/powerpc/include/asm/signal.h
index a7360cdd99e..a7360cdd99e 100644
--- a/include/asm-powerpc/signal.h
+++ b/arch/powerpc/include/asm/signal.h
diff --git a/include/asm-powerpc/smp.h b/arch/powerpc/include/asm/smp.h
index 4d28e1e4521..4d28e1e4521 100644
--- a/include/asm-powerpc/smp.h
+++ b/arch/powerpc/include/asm/smp.h
diff --git a/include/asm-powerpc/smu.h b/arch/powerpc/include/asm/smu.h
index 7ae2753da56..7ae2753da56 100644
--- a/include/asm-powerpc/smu.h
+++ b/arch/powerpc/include/asm/smu.h
diff --git a/include/asm-powerpc/socket.h b/arch/powerpc/include/asm/socket.h
index f5a4e168e49..f5a4e168e49 100644
--- a/include/asm-powerpc/socket.h
+++ b/arch/powerpc/include/asm/socket.h
diff --git a/include/asm-powerpc/sockios.h b/arch/powerpc/include/asm/sockios.h
index 55cef7675a3..55cef7675a3 100644
--- a/include/asm-powerpc/sockios.h
+++ b/arch/powerpc/include/asm/sockios.h
diff --git a/include/asm-powerpc/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
index 54a47ea2c3a..54a47ea2c3a 100644
--- a/include/asm-powerpc/sparsemem.h
+++ b/arch/powerpc/include/asm/sparsemem.h
diff --git a/include/asm-powerpc/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index f56a843f470..f56a843f470 100644
--- a/include/asm-powerpc/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
diff --git a/include/asm-powerpc/spinlock_types.h b/arch/powerpc/include/asm/spinlock_types.h
index 74236c9f05b..74236c9f05b 100644
--- a/include/asm-powerpc/spinlock_types.h
+++ b/arch/powerpc/include/asm/spinlock_types.h
diff --git a/include/asm-powerpc/spu.h b/arch/powerpc/include/asm/spu.h
index 8b2eb044270..8b2eb044270 100644
--- a/include/asm-powerpc/spu.h
+++ b/arch/powerpc/include/asm/spu.h
diff --git a/include/asm-powerpc/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h
index a40fd491250..a40fd491250 100644
--- a/include/asm-powerpc/spu_csa.h
+++ b/arch/powerpc/include/asm/spu_csa.h
diff --git a/include/asm-powerpc/spu_info.h b/arch/powerpc/include/asm/spu_info.h
index 3545efbf989..3545efbf989 100644
--- a/include/asm-powerpc/spu_info.h
+++ b/arch/powerpc/include/asm/spu_info.h
diff --git a/include/asm-powerpc/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h
index 25020a34ce7..25020a34ce7 100644
--- a/include/asm-powerpc/spu_priv1.h
+++ b/arch/powerpc/include/asm/spu_priv1.h
diff --git a/include/asm-powerpc/sstep.h b/arch/powerpc/include/asm/sstep.h
index f593b0f9b62..f593b0f9b62 100644
--- a/include/asm-powerpc/sstep.h
+++ b/arch/powerpc/include/asm/sstep.h
diff --git a/include/asm-powerpc/stat.h b/arch/powerpc/include/asm/stat.h
index e4edc510b53..e4edc510b53 100644
--- a/include/asm-powerpc/stat.h
+++ b/arch/powerpc/include/asm/stat.h
diff --git a/include/asm-powerpc/statfs.h b/arch/powerpc/include/asm/statfs.h
index 67024026c10..67024026c10 100644
--- a/include/asm-powerpc/statfs.h
+++ b/arch/powerpc/include/asm/statfs.h
diff --git a/include/asm-powerpc/string.h b/arch/powerpc/include/asm/string.h
index e40010abcaf..e40010abcaf 100644
--- a/include/asm-powerpc/string.h
+++ b/arch/powerpc/include/asm/string.h
diff --git a/include/asm-powerpc/suspend.h b/arch/powerpc/include/asm/suspend.h
index cbf2c9404c3..cbf2c9404c3 100644
--- a/include/asm-powerpc/suspend.h
+++ b/arch/powerpc/include/asm/suspend.h
diff --git a/include/asm-powerpc/synch.h b/arch/powerpc/include/asm/synch.h
index 45963e80f55..45963e80f55 100644
--- a/include/asm-powerpc/synch.h
+++ b/arch/powerpc/include/asm/synch.h
diff --git a/include/asm-powerpc/syscall.h b/arch/powerpc/include/asm/syscall.h
index efa7f0b879f..efa7f0b879f 100644
--- a/include/asm-powerpc/syscall.h
+++ b/arch/powerpc/include/asm/syscall.h
diff --git a/include/asm-powerpc/syscalls.h b/arch/powerpc/include/asm/syscalls.h
index eb8eb400c66..eb8eb400c66 100644
--- a/include/asm-powerpc/syscalls.h
+++ b/arch/powerpc/include/asm/syscalls.h
diff --git a/include/asm-powerpc/systbl.h b/arch/powerpc/include/asm/systbl.h
index e084272ed1c..f6cc7a43b4f 100644
--- a/include/asm-powerpc/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -92,7 +92,7 @@ COMPAT_SYS_SPU(readlink)
 SYSCALL(uselib)
 SYSCALL(swapon)
 SYSCALL(reboot)
-SYSX(sys_ni_syscall,old32_readdir,old_readdir)
+SYSX(sys_ni_syscall,compat_sys_old_readdir,old_readdir)
 SYSCALL_SPU(mmap)
 SYSCALL_SPU(munmap)
 SYSCALL_SPU(truncate)
diff --git a/include/asm-powerpc/system.h b/arch/powerpc/include/asm/system.h
index d6648c14332..d6648c14332 100644
--- a/include/asm-powerpc/system.h
+++ b/arch/powerpc/include/asm/system.h
diff --git a/include/asm-powerpc/tce.h b/arch/powerpc/include/asm/tce.h
index f663634cccc..f663634cccc 100644
--- a/include/asm-powerpc/tce.h
+++ b/arch/powerpc/include/asm/tce.h
diff --git a/include/asm-powerpc/termbits.h b/arch/powerpc/include/asm/termbits.h
index 6698188ca55..6698188ca55 100644
--- a/include/asm-powerpc/termbits.h
+++ b/arch/powerpc/include/asm/termbits.h
diff --git a/include/asm-powerpc/termios.h b/arch/powerpc/include/asm/termios.h
index 2c14fea07c8..2c14fea07c8 100644
--- a/include/asm-powerpc/termios.h
+++ b/arch/powerpc/include/asm/termios.h
diff --git a/include/asm-powerpc/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 9665a26a253..9665a26a253 100644
--- a/include/asm-powerpc/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
diff --git a/include/asm-powerpc/time.h b/arch/powerpc/include/asm/time.h
index febd581ec9b..febd581ec9b 100644
--- a/include/asm-powerpc/time.h
+++ b/arch/powerpc/include/asm/time.h
diff --git a/include/asm-powerpc/timex.h b/arch/powerpc/include/asm/timex.h
index c55e14f7ef4..c55e14f7ef4 100644
--- a/include/asm-powerpc/timex.h
+++ b/arch/powerpc/include/asm/timex.h
diff --git a/include/asm-powerpc/tlb.h b/arch/powerpc/include/asm/tlb.h
index e20ff7541f3..e20ff7541f3 100644
--- a/include/asm-powerpc/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
diff --git a/include/asm-powerpc/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index 361cd5c7a32..361cd5c7a32 100644
--- a/include/asm-powerpc/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
diff --git a/include/asm-powerpc/topology.h b/arch/powerpc/include/asm/topology.h
index c32da6f9799..c32da6f9799 100644
--- a/include/asm-powerpc/topology.h
+++ b/arch/powerpc/include/asm/topology.h
diff --git a/include/asm-powerpc/tsi108.h b/arch/powerpc/include/asm/tsi108.h
index f8b60793b7a..f8b60793b7a 100644
--- a/include/asm-powerpc/tsi108.h
+++ b/arch/powerpc/include/asm/tsi108.h
diff --git a/include/asm-powerpc/tsi108_irq.h b/arch/powerpc/include/asm/tsi108_irq.h
index 6ed93979fbe..6ed93979fbe 100644
--- a/include/asm-powerpc/tsi108_irq.h
+++ b/arch/powerpc/include/asm/tsi108_irq.h
diff --git a/include/asm-powerpc/tsi108_pci.h b/arch/powerpc/include/asm/tsi108_pci.h
index 5653d7cc3e2..5653d7cc3e2 100644
--- a/include/asm-powerpc/tsi108_pci.h
+++ b/arch/powerpc/include/asm/tsi108_pci.h
diff --git a/include/asm-powerpc/types.h b/arch/powerpc/include/asm/types.h
index d3374bc865b..d3374bc865b 100644
--- a/include/asm-powerpc/types.h
+++ b/arch/powerpc/include/asm/types.h
diff --git a/include/asm-powerpc/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index bd0fb849515..bd0fb849515 100644
--- a/include/asm-powerpc/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
diff --git a/include/asm-powerpc/ucc.h b/arch/powerpc/include/asm/ucc.h
index 46b09ba6bea..46b09ba6bea 100644
--- a/include/asm-powerpc/ucc.h
+++ b/arch/powerpc/include/asm/ucc.h
diff --git a/include/asm-powerpc/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h
index fce16abe7ee..839aab8bf37 100644
--- a/include/asm-powerpc/ucc_fast.h
+++ b/arch/powerpc/include/asm/ucc_fast.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/ucc_fast.h
- *
  * Internal header file for UCC FAST unit routines.
  *
  * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
diff --git a/include/asm-powerpc/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h
index 0980e6ad335..0980e6ad335 100644
--- a/include/asm-powerpc/ucc_slow.h
+++ b/arch/powerpc/include/asm/ucc_slow.h
diff --git a/include/asm-powerpc/ucontext.h b/arch/powerpc/include/asm/ucontext.h
index d9a4ddf0cc8..d9a4ddf0cc8 100644
--- a/include/asm-powerpc/ucontext.h
+++ b/arch/powerpc/include/asm/ucontext.h
diff --git a/include/asm-powerpc/udbg.h b/arch/powerpc/include/asm/udbg.h
index 6418ceea44b..6418ceea44b 100644
--- a/include/asm-powerpc/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
diff --git a/include/asm-powerpc/uic.h b/arch/powerpc/include/asm/uic.h
index 970eb7e2186..597edfcae3d 100644
--- a/include/asm-powerpc/uic.h
+++ b/arch/powerpc/include/asm/uic.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-powerpc/uic.h
- *
  * IBM PPC4xx UIC external definitions and structure.
  *
  * Maintainer: David Gibson <dwg@au1.ibm.com>
diff --git a/include/asm-powerpc/unaligned.h b/arch/powerpc/include/asm/unaligned.h
index 5f1b1e3c213..5f1b1e3c213 100644
--- a/include/asm-powerpc/unaligned.h
+++ b/arch/powerpc/include/asm/unaligned.h
diff --git a/include/asm-powerpc/uninorth.h b/arch/powerpc/include/asm/uninorth.h
index f737732c386..f737732c386 100644
--- a/include/asm-powerpc/uninorth.h
+++ b/arch/powerpc/include/asm/uninorth.h
diff --git a/include/asm-powerpc/unistd.h b/arch/powerpc/include/asm/unistd.h
index e07d0c76ed7..e07d0c76ed7 100644
--- a/include/asm-powerpc/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
diff --git a/include/asm-powerpc/user.h b/arch/powerpc/include/asm/user.h
index 3fd4545dd74..3fd4545dd74 100644
--- a/include/asm-powerpc/user.h
+++ b/arch/powerpc/include/asm/user.h
diff --git a/include/asm-powerpc/vdso.h b/arch/powerpc/include/asm/vdso.h
index 26fc449bd98..26fc449bd98 100644
--- a/include/asm-powerpc/vdso.h
+++ b/arch/powerpc/include/asm/vdso.h
diff --git a/include/asm-powerpc/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
index f01393224b5..f01393224b5 100644
--- a/include/asm-powerpc/vdso_datapage.h
+++ b/arch/powerpc/include/asm/vdso_datapage.h
diff --git a/include/asm-powerpc/vga.h b/arch/powerpc/include/asm/vga.h
index a2eac409c1e..a2eac409c1e 100644
--- a/include/asm-powerpc/vga.h
+++ b/arch/powerpc/include/asm/vga.h
diff --git a/include/asm-powerpc/vio.h b/arch/powerpc/include/asm/vio.h
index 0a290a19594..0a290a19594 100644
--- a/include/asm-powerpc/vio.h
+++ b/arch/powerpc/include/asm/vio.h
diff --git a/include/asm-powerpc/xilinx_intc.h b/arch/powerpc/include/asm/xilinx_intc.h
index 343612f8fec..343612f8fec 100644
--- a/include/asm-powerpc/xilinx_intc.h
+++ b/arch/powerpc/include/asm/xilinx_intc.h
diff --git a/include/asm-powerpc/xmon.h b/arch/powerpc/include/asm/xmon.h
index 5eb8e599e5c..5eb8e599e5c 100644
--- a/include/asm-powerpc/xmon.h
+++ b/arch/powerpc/include/asm/xmon.h
diff --git a/include/asm-powerpc/xor.h b/arch/powerpc/include/asm/xor.h
index c82eb12a5b1..c82eb12a5b1 100644
--- a/include/asm-powerpc/xor.h
+++ b/arch/powerpc/include/asm/xor.h
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 1a4094704b1..946daea780f 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -14,12 +14,13 @@ endif
 
 ifdef CONFIG_FTRACE
 # Do not trace early boot code
-CFLAGS_REMOVE_cputable.o = -pg
-CFLAGS_REMOVE_prom_init.o = -pg
+CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
 
 ifdef CONFIG_DYNAMIC_FTRACE
 # dynamic ftrace setup.
-CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
 endif
 
 endif
@@ -59,8 +60,6 @@ obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
 obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
-
 extra-$(CONFIG_PPC_STD_MMU)	:= head_32.o
 extra-$(CONFIG_PPC64)		:= head_64.o
 extra-$(CONFIG_40x)		:= head_40x.o
@@ -100,12 +99,6 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
 obj-y				+= iomap.o
 endif
 
-else
-# stuff used from here for ARCH=ppc
-smpobj-$(CONFIG_SMP)		+= smp.o
-
-endif
-
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
@@ -121,9 +114,6 @@ PHONY += systbl_chk
 systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
 	$(call cmd,systbl_chk)
 
-
-ifeq ($(CONFIG_PPC_MERGE),y)
-
 $(obj)/built-in.o:		prom_init_check
 
 quiet_cmd_prom_init_check = CALL    $<
@@ -133,7 +123,4 @@ PHONY += prom_init_check
 prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
 	$(call cmd,prom_init_check)
 
-endif
-
-
 clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 367129789cc..5af4e9b2dbe 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -647,7 +647,7 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 		       unsigned int flags, unsigned int length)
 {
 	char *ptr = (char *) &current->thread.TS_FPR(reg);
-	int ret;
+	int ret = 0;
 
 	flush_vsx_to_thread(current);
 
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 5465e8de0e6..80cac984d85 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -39,12 +39,6 @@ _GLOBAL(__setup_cpu_440gx)
 _GLOBAL(__setup_cpu_440spe)
 	b	__fixup_440A_mcheck
 
- /* Temporary fixup for arch/ppc until we kill the whole thing */
-#ifndef CONFIG_PPC_MERGE
-_GLOBAL(__fixup_440A_mcheck)
-	blr
-#endif
-
 /* enable APU between CPU and FPU */
 _GLOBAL(__init_fpu_44x)
 	mfspr	r3,SPRN_CCR0
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index e0debcca0bf..a323c9b32ee 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -86,6 +86,19 @@ static int __init parse_savemaxmem(char *p)
 }
 __setup("savemaxmem=", parse_savemaxmem);
 
+
+static size_t copy_oldmem_vaddr(void *vaddr, char *buf, size_t csize,
+                               unsigned long offset, int userbuf)
+{
+	if (userbuf) {
+		if (copy_to_user((char __user *)buf, (vaddr + offset), csize))
+			return -EFAULT;
+	} else
+		memcpy(buf, (vaddr + offset), csize);
+
+	return csize;
+}
+
 /**
  * copy_oldmem_page - copy one page from "oldmem"
  * @pfn: page frame number to be copied
@@ -107,16 +120,16 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 	if (!csize)
 		return 0;
 
-	vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+	csize = min(csize, PAGE_SIZE);
 
-	if (userbuf) {
-		if (copy_to_user((char __user *)buf, (vaddr + offset), csize)) {
-			iounmap(vaddr);
-			return -EFAULT;
-		}
-	} else
-		memcpy(buf, (vaddr + offset), csize);
+	if (pfn < max_pfn) {
+		vaddr = __va(pfn << PAGE_SHIFT);
+		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
+	} else {
+		vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
+		iounmap(vaddr);
+	}
 
-	iounmap(vaddr);
 	return csize;
 }
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 99ee2f0f0f2..8bb65751929 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1155,7 +1155,7 @@ flush_tlbs:
 	lis	r10, 0x40
 1:	addic.	r10, r10, -0x1000
 	tlbie	r10
-	blt	1b
+	bgt	1b
 	sync
 	blr
 
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 9d42eb57aea..a06362223f8 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -233,17 +233,6 @@ void ibmebus_free_irq(u32 ist, void *dev_id)
 }
 EXPORT_SYMBOL(ibmebus_free_irq);
 
-static ssize_t name_show(struct device *dev,
-			 struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%s\n", to_of_device(dev)->node->name);
-}
-
-static struct device_attribute ibmebus_dev_attrs[] = {
-	__ATTR_RO(name),
-	__ATTR_NULL
-};
-
 static char *ibmebus_chomp(const char *in, size_t count)
 {
 	char *out = kmalloc(count + 1, GFP_KERNEL);
@@ -327,7 +316,6 @@ static struct bus_attribute ibmebus_bus_attrs[] = {
 
 struct bus_type ibmebus_bus_type = {
 	.uevent    = of_device_uevent,
-	.dev_attrs = ibmebus_dev_attrs,
 	.bus_attrs = ibmebus_bus_attrs
 };
 EXPORT_SYMBOL(ibmebus_bus_type);
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 019b02d8844..15c611de1ee 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -158,7 +158,7 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	mfspr	r12,SPRN_SPRG3
+	rlwinm	r12,r11,0,0,31-THREAD_SHIFT
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
index 06304034b39..47a1a983ff8 100644
--- a/arch/powerpc/kernel/idle_e500.S
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -84,10 +84,11 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	mfspr	r12,SPRN_SPRG3
+	rlwinm	r12,r1,0,0,31-THREAD_SHIFT
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
 	li	r11,0
 #endif
+
 	b	transfer_to_handler_cont
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 6ac8612da3c..d972decf032 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -77,22 +77,12 @@ static int ppc_spurious_interrupts;
 EXPORT_SYMBOL(__irq_offset_value);
 atomic_t ppc_n_lost_interrupts;
 
-#ifndef CONFIG_PPC_MERGE
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-#endif
-
 #ifdef CONFIG_TAU_INT
 extern int tau_initialized;
 extern int tau_interrupts(int);
 #endif
 #endif /* CONFIG_PPC32 */
 
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-extern atomic_t ipi_recv;
-extern atomic_t ipi_sent;
-#endif
-
 #ifdef CONFIG_PPC64
 EXPORT_SYMBOL(irq_desc);
 
@@ -216,21 +206,14 @@ int show_interrupts(struct seq_file *p, void *v)
 skip:
 		spin_unlock_irqrestore(&desc->lock, flags);
 	} else if (i == NR_IRQS) {
-#ifdef CONFIG_PPC32
-#ifdef CONFIG_TAU_INT
+#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
 		if (tau_initialized){
 			seq_puts(p, "TAU: ");
 			for_each_online_cpu(j)
 				seq_printf(p, "%10u ", tau_interrupts(j));
 			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
 		}
-#endif
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-		/* should this be per processor send/receive? */
-		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
-				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
-#endif
-#endif /* CONFIG_PPC32 */
+#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
 		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
 	}
 	return 0;
@@ -454,8 +437,6 @@ void do_softirq(void)
  * IRQ controller and virtual interrupts
  */
 
-#ifdef CONFIG_PPC_MERGE
-
 static LIST_HEAD(irq_hosts);
 static DEFINE_SPINLOCK(irq_big_lock);
 static DEFINE_PER_CPU(unsigned int, irq_radix_reader);
@@ -1114,8 +1095,6 @@ static int __init irq_debugfs_init(void)
 __initcall(irq_debugfs_init);
 #endif /* CONFIG_VIRQ_DEBUG */
 
-#endif /* CONFIG_PPC_MERGE */
-
 #ifdef CONFIG_PPC64
 static int __init setup_noirqdistrib(char *str)
 {
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 9f856a0c3e3..b3eef30b513 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -416,6 +416,8 @@ static void pseries_cmo_data(struct seq_file *m)
 	unsigned long cmo_faults = 0;
 	unsigned long cmo_fault_time = 0;
 
+	seq_printf(m, "cmo_enabled=%d\n", firmware_has_feature(FW_FEATURE_CMO));
+
 	if (!firmware_has_feature(FW_FEATURE_CMO))
 		return;
 
@@ -427,6 +429,9 @@ static void pseries_cmo_data(struct seq_file *m)
 	seq_printf(m, "cmo_faults=%lu\n", cmo_faults);
 	seq_printf(m, "cmo_fault_time_usec=%lu\n",
 		   cmo_fault_time / tb_ticks_per_usec);
+	seq_printf(m, "cmo_primary_psp=%d\n", cmo_get_primary_psp());
+	seq_printf(m, "cmo_secondary_psp=%d\n", cmo_get_secondary_psp());
+	seq_printf(m, "cmo_page_size=%lu\n", cmo_get_page_size());
 }
 
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
@@ -636,10 +641,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		retval = -EIO;
 	} else if (retval == H_PARAMETER) {
 		retval = -EINVAL;
-	} else {
-		printk(KERN_WARNING "%s: received unknown hv return code %ld",
-		       __func__, retval);
-		retval = -EIO;
 	}
 
 	return retval;
diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c
index cbaa3419679..ae63a964b85 100644
--- a/arch/powerpc/kernel/machine_kexec_32.c
+++ b/arch/powerpc/kernel/machine_kexec_32.c
@@ -51,7 +51,7 @@ void default_machine_kexec(struct kimage *image)
 						relocate_new_kernel_size);
 
 	flush_icache_range(reboot_code_buffer,
-				reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+				reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	/* now call it */
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 6321ae36f72..7a6dfbca768 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -899,7 +899,7 @@ relocate_new_kernel:
 
 	/* set a new stack at the bottom of our page... */
 	/* (not really needed now) */
-	addi	r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */
+	addi	r1, r4, KEXEC_CONTROL_PAGE_SIZE - 8 /* for LR Save+Back Chain */
 	stw	r0, 0(r1)
 
 	/* Do the copies */
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index af07003573c..7ff29247526 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -99,18 +99,3 @@ void module_arch_cleanup(struct module *mod)
 {
 	module_bug_cleanup(mod);
 }
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
-	struct mod_arch_specific *mod;
-	unsigned int i;
-	struct bug_entry *bug;
-
-	list_for_each_entry(mod, &module_bug_list, bug_list) {
-		bug = mod->bug_table;
-		for (i = 0; i < mod->num_bugs; ++i, ++bug)
-			if (bugaddr == bug->bug_addr)
-				return bug;
-	}
-	return NULL;
-}
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index ee6a2982d56..1af2377e499 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -22,7 +22,6 @@
 #include <linux/vmalloc.h>
 #include <linux/bug.h>
 #include <asm/module.h>
-#include <asm/uaccess.h>
 #include <asm/firmware.h>
 #include <asm/code-patching.h>
 #include <linux/sort.h>
@@ -42,13 +41,6 @@
 #define DEBUGP(fmt , ...)
 #endif
 
-/* There's actually a third entry here, but it's unused */
-struct ppc64_opd_entry
-{
-	unsigned long funcaddr;
-	unsigned long r2;
-};
-
 /* Like PPC32, we need little trampolines to do > 24-bit jumps (into
    the kernel itself).  But on PPC64, these need to be used for every
    jump, actually, to reset r2 (TOC+0x8000). */
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 224e9a11765..ea0c61e09b7 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -650,11 +650,18 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 		}
 	}
 
-	/* Out of paranoia, let's put the ISA hole last if any */
-	if (isa_hole >= 0 && memno > 0 && isa_hole != (memno-1)) {
-		struct resource tmp = hose->mem_resources[isa_hole];
-		hose->mem_resources[isa_hole] = hose->mem_resources[memno-1];
-		hose->mem_resources[memno-1] = tmp;
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
 	}
 }
 
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index e030f3bd502..957bded0020 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -276,10 +276,8 @@ int set_dabr(unsigned long dabr)
 {
 	__get_cpu_var(current_dabr) = dabr;
 
-#ifdef CONFIG_PPC_MERGE		/* XXX for now */
 	if (ppc_md.set_dabr)
 		return ppc_md.set_dabr(dabr);
-#endif
 
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
 #if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 6b66cd85b43..3635be61f89 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -375,7 +375,7 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset,
 	flush_vsx_to_thread(target);
 
 	for (i = 0; i < 32 ; i++)
-		buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+		buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET];
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  buf, 0, 32 * sizeof(double));
 
@@ -394,7 +394,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset,
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
 	for (i = 0; i < 32 ; i++)
-		current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+		target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 
 
 	return ret;
@@ -975,15 +975,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	case PTRACE_GETVSRREGS:
 		return copy_regset_to_user(child, &user_ppc_native_view,
 					   REGSET_VSX,
-					   0, (32 * sizeof(vector128) +
-					       sizeof(u32)),
+					   0, 32 * sizeof(double),
 					   (void __user *) data);
 
 	case PTRACE_SETVSRREGS:
 		return copy_regset_from_user(child, &user_ppc_native_view,
 					     REGSET_VSX,
-					     0, (32 * sizeof(vector128) +
-						 sizeof(u32)),
+					     0, 32 * sizeof(double),
 					     (const void __user *) data);
 #endif
 #ifdef CONFIG_SPE
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 67bf1a1e7e1..197d49c790a 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -294,6 +294,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 	case PTRACE_SETFPREGS:
 	case PTRACE_GETVRREGS:
 	case PTRACE_SETVRREGS:
+	case PTRACE_GETVSRREGS:
+	case PTRACE_SETVSRREGS:
 	case PTRACE_GETREGS64:
 	case PTRACE_SETREGS64:
 	case PPC_PTRACE_GETFPREGS:
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index c680f1bbd38..1f8505c2354 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -792,6 +792,9 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	if (args.token == RTAS_UNKNOWN_SERVICE)
 		return -EINVAL;
 
+	args.rets = &args.args[nargs];
+	memset(args.rets, 0, args.nret * sizeof(rtas_arg_t));
+
 	/* Need to handle ibm,suspend_me call specially */
 	if (args.token == ibm_suspend_me_token) {
 		rc = rtas_ibm_suspend_me(&args);
@@ -808,8 +811,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	enter_rtas(__pa(&rtas.args));
 	args = rtas.args;
 
-	args.rets = &args.args[nargs];
-
 	/* A -1 return code indicates that the last command couldn't
 	   be completed due to a hardware error. */
 	if (args.rets[0] == -1)
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 709f8cb8bfc..d98634c7606 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -52,63 +52,6 @@
 #include <asm/ppc-pci.h>
 #include <asm/syscalls.h>
 
-struct old_linux_dirent32 {
-	u32		d_ino;
-	u32		d_offset;
-	unsigned short	d_namlen;
-	char		d_name[1];
-};
-
-struct readdir_callback32 {
-	struct old_linux_dirent32 __user * dirent;
-	int count;
-};
-
-static int fillonedir(void * __buf, const char * name, int namlen,
-		                  off_t offset, u64 ino, unsigned int d_type)
-{
-	struct readdir_callback32 * buf = (struct readdir_callback32 *) __buf;
-	struct old_linux_dirent32 __user * dirent;
-	ino_t d_ino;
-
-	if (buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->count++;
-	dirent = buf->dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(offset, &dirent->d_offset);
-	put_user(namlen, &dirent->d_namlen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	return 0;
-}
-
-asmlinkage int old32_readdir(unsigned int fd, struct old_linux_dirent32 __user *dirent, unsigned int count)
-{
-	int error = -EBADF;
-	struct file * file;
-	struct readdir_callback32 buf;
-
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.count = 0;
-	buf.dirent = dirent;
-
-	error = vfs_readdir(file, (filldir_t)fillonedir, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.count;
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
 
 asmlinkage long ppc32_select(u32 n, compat_ulong_t __user *inp,
 		compat_ulong_t __user *outp, compat_ulong_t __user *exp,
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index f177c60ea76..65639a43e64 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -788,9 +788,7 @@ static int __init vdso_init(void)
 
 	return 0;
 }
-#ifdef CONFIG_PPC_MERGE
 arch_initcall(vdso_init);
-#endif
 
 int in_gate_area_no_task(unsigned long addr)
 {
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 22a3c33fd75..2750fbab197 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1113,7 +1113,7 @@ static int vio_bus_probe(struct device *dev)
 				return error;
 		}
 		error = viodrv->probe(viodev, id);
-		if (error)
+		if (error && firmware_has_feature(FW_FEATURE_CMO))
 			vio_cmo_bus_remove(viodev);
 	}
 
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 4a8ce62fe11..9f6c1ca1739 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -66,11 +66,12 @@ SECTIONS
 		__got2_end = .;
 #endif /* CONFIG_PPC32 */
 
-		. = ALIGN(PAGE_SIZE);
-		_etext = .;
-		PROVIDE32 (etext = .);
 	} :kernel
 
+	. = ALIGN(PAGE_SIZE);
+	_etext = .;
+	PROVIDE32 (etext = .);
+
 	/* Read-only data */
 	RODATA
 
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 2a88e8b9a3c..d69912c07ce 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -6,12 +6,10 @@ ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS		+= -mno-minimal-toc
 endif
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y			:= string.o alloc.o \
 			   checksum_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
 obj-$(CONFIG_HAS_IOMEM)	+= devres.o
-endif
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 1c00e0196f6..e7392b45a5e 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -12,7 +12,8 @@ obj-y				:= fault.o mem.o \
 				   mmu_context_$(CONFIG_WORD_SIZE).o
 hash-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
 obj-$(CONFIG_PPC64)		+= hash_utils_64.o \
-				   slb_low.o slb.o stab.o mmap.o $(hash-y)
+				   slb_low.o slb.o stab.o \
+				   gup.o mmap.o $(hash-y)
 obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o
 obj-$(CONFIG_PPC_STD_MMU)	+= hash_low_$(CONFIG_WORD_SIZE).o \
 				   tlb_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
new file mode 100644
index 00000000000..9fdf4d6335e
--- /dev/null
+++ b/arch/powerpc/mm/gup.c
@@ -0,0 +1,280 @@
+/*
+ * Lockless get_user_pages_fast for powerpc
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#undef DEBUG
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/vmstat.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <asm/pgtable.h>
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask, result;
+	pte_t *ptep;
+
+	result = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		result |= _PAGE_RW;
+	mask = result | _PAGE_SPECIAL;
+
+	ptep = pte_offset_kernel(&pmd, addr);
+	do {
+		pte_t pte = *ptep;
+		struct page *page;
+
+		if ((pte_val(pte) & mask) != result)
+			return 0;
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		if (!page_cache_get_speculative(page))
+			return 0;
+		if (unlikely(pte != *ptep)) {
+			put_page(page);
+			return 0;
+		}
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+
+	return 1;
+}
+
+#ifdef CONFIG_HUGETLB_PAGE
+static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
+				 unsigned long *addr, unsigned long end,
+				 int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	unsigned long pte_end;
+	struct page *head, *page;
+	pte_t pte;
+	int refs;
+
+	pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
+	if (pte_end < end)
+		end = pte_end;
+
+	pte = *ptep;
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (*addr += PAGE_SIZE, *addr != end);
+
+	if (!page_cache_add_speculative(head, refs)) {
+		*nr -= refs;
+		return 0;
+	}
+	if (unlikely(pte != *ptep)) {
+		/* Could be optimized better */
+		while (*nr) {
+			put_page(page);
+			(*nr)--;
+		}
+	}
+
+	return 1;
+}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+			return 0;
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+			return 0;
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	pgd_t *pgdp;
+	int psize, nr = 0;
+	unsigned int shift;
+
+	pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					start, len)))
+		goto slow_irqon;
+
+	pr_debug("  aligned: %lx .. %lx\n", start, end);
+
+#ifdef CONFIG_HUGETLB_PAGE
+	/* We bail out on slice boundary crossing when hugetlb is
+	 * enabled in order to not have to deal with two different
+	 * page table formats
+	 */
+	if (addr < SLICE_LOW_TOP) {
+		if (end > SLICE_LOW_TOP)
+			goto slow_irqon;
+
+		if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
+			     GET_LOW_SLICE_INDEX(end - 1)))
+			goto slow_irqon;
+	} else {
+		if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
+			     GET_HIGH_SLICE_INDEX(end - 1)))
+			goto slow_irqon;
+	}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables from being freed on powerpc.
+	 *
+	 * So long as we atomically load page table pointers versus teardown,
+	 * we can follow the address down to the the page and take a ref on it.
+	 */
+	local_irq_disable();
+
+	psize = get_slice_psize(mm, addr);
+	shift = mmu_psize_defs[psize].shift;
+
+#ifdef CONFIG_HUGETLB_PAGE
+	if (unlikely(mmu_huge_psizes[psize])) {
+		pte_t *ptep;
+		unsigned long a = addr;
+		unsigned long sz = ((1UL) << shift);
+		struct hstate *hstate = size_to_hstate(sz);
+
+		BUG_ON(!hstate);
+		/*
+		 * XXX: could be optimized to avoid hstate
+		 * lookup entirely (just use shift)
+		 */
+
+		do {
+			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
+			ptep = huge_pte_offset(mm, a);
+			pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+			if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
+						   &nr))
+				goto slow;
+		} while (a != end);
+	} else
+#endif /* CONFIG_HUGETLB_PAGE */
+	{
+		pgdp = pgd_offset(mm, addr);
+		do {
+			pgd_t pgd = *pgdp;
+
+			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
+			pr_debug("  %016lx: normal pgd %p\n", addr, (void *)pgd);
+			next = pgd_addr_end(addr, end);
+			if (pgd_none(pgd))
+				goto slow;
+			if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+				goto slow;
+		} while (pgdp++, addr = next, addr != end);
+	}
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		pr_debug("  slow path ! nr = %d\n", nr);
+
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		down_read(&mm->mmap_sem);
+		ret = get_user_pages(current, mm, start,
+			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+		up_read(&mm->mmap_sem);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 5ce5a4dcd00..8920eea3452 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -151,39 +151,58 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = {
 	},
 };
 
+static unsigned long htab_convert_pte_flags(unsigned long pteflags)
+{
+	unsigned long rflags = pteflags & 0x1fa;
+
+	/* _PAGE_EXEC -> NOEXEC */
+	if ((pteflags & _PAGE_EXEC) == 0)
+		rflags |= HPTE_R_N;
+
+	/* PP bits. PAGE_USER is already PP bit 0x2, so we only
+	 * need to add in 0x1 if it's a read-only user page
+	 */
+	if ((pteflags & _PAGE_USER) && !((pteflags & _PAGE_RW) &&
+					 (pteflags & _PAGE_DIRTY)))
+		rflags |= 1;
+
+	/* Always add C */
+	return rflags | HPTE_R_C;
+}
 
 int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
-		      unsigned long pstart, unsigned long mode,
+		      unsigned long pstart, unsigned long prot,
 		      int psize, int ssize)
 {
 	unsigned long vaddr, paddr;
 	unsigned int step, shift;
-	unsigned long tmp_mode;
 	int ret = 0;
 
 	shift = mmu_psize_defs[psize].shift;
 	step = 1 << shift;
 
+	prot = htab_convert_pte_flags(prot);
+
+	DBG("htab_bolt_mapping(%lx..%lx -> %lx (%lx,%d,%d)\n",
+	    vstart, vend, pstart, prot, psize, ssize);
+
 	for (vaddr = vstart, paddr = pstart; vaddr < vend;
 	     vaddr += step, paddr += step) {
 		unsigned long hash, hpteg;
 		unsigned long vsid = get_kernel_vsid(vaddr, ssize);
 		unsigned long va = hpt_va(vaddr, vsid, ssize);
+		unsigned long tprot = prot;
 
-		tmp_mode = mode;
-		
-		/* Make non-kernel text non-executable */
-		if (!in_kernel_text(vaddr))
-			tmp_mode = mode | HPTE_R_N;
+		/* Make kernel text executable */
+		if (in_kernel_text(vaddr))
+			tprot &= ~HPTE_R_N;
 
 		hash = hpt_hash(va, shift, ssize);
 		hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
 
-		DBG("htab_bolt_mapping: calling %p\n", ppc_md.hpte_insert);
-
 		BUG_ON(!ppc_md.hpte_insert);
-		ret = ppc_md.hpte_insert(hpteg, va, paddr,
-				tmp_mode, HPTE_V_BOLTED, psize, ssize);
+		ret = ppc_md.hpte_insert(hpteg, va, paddr, tprot,
+					 HPTE_V_BOLTED, psize, ssize);
 
 		if (ret < 0)
 			break;
@@ -519,9 +538,9 @@ static unsigned long __init htab_get_table_size(void)
 #ifdef CONFIG_MEMORY_HOTPLUG
 void create_section_mapping(unsigned long start, unsigned long end)
 {
-		BUG_ON(htab_bolt_mapping(start, end, __pa(start),
-			_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
-			mmu_linear_psize, mmu_kernel_ssize));
+	BUG_ON(htab_bolt_mapping(start, end, __pa(start),
+				 PAGE_KERNEL, mmu_linear_psize,
+				 mmu_kernel_ssize));
 }
 
 int remove_section_mapping(unsigned long start, unsigned long end)
@@ -570,7 +589,7 @@ void __init htab_initialize(void)
 {
 	unsigned long table;
 	unsigned long pteg_count;
-	unsigned long mode_rw;
+	unsigned long prot;
 	unsigned long base = 0, size = 0, limit;
 	int i;
 
@@ -628,7 +647,7 @@ void __init htab_initialize(void)
 		mtspr(SPRN_SDR1, _SDR1);
 	}
 
-	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
+	prot = PAGE_KERNEL;
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
@@ -647,7 +666,8 @@ void __init htab_initialize(void)
 		base = (unsigned long)__va(lmb.memory.region[i].base);
 		size = lmb.memory.region[i].size;
 
-		DBG("creating mapping for region: %lx : %lx\n", base, size);
+		DBG("creating mapping for region: %lx..%lx (prot: %x)\n",
+		    base, size, prot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
@@ -664,21 +684,21 @@ void __init htab_initialize(void)
 			unsigned long dart_table_end = dart_tablebase + 16 * MB;
 			if (base != dart_tablebase)
 				BUG_ON(htab_bolt_mapping(base, dart_tablebase,
-							__pa(base), mode_rw,
+							__pa(base), prot,
 							mmu_linear_psize,
 							mmu_kernel_ssize));
 			if ((base + size) > dart_table_end)
 				BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
 							base + size,
 							__pa(dart_table_end),
-							 mode_rw,
+							 prot,
 							 mmu_linear_psize,
 							 mmu_kernel_ssize));
 			continue;
 		}
 #endif /* CONFIG_U3_DART */
 		BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
-				mode_rw, mmu_linear_psize, mmu_kernel_ssize));
+				prot, mmu_linear_psize, mmu_kernel_ssize));
        }
 
 	/*
@@ -696,7 +716,7 @@ void __init htab_initialize(void)
 			tce_alloc_start = base + size + 1;
 
 		BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end,
-					 __pa(tce_alloc_start), mode_rw,
+					 __pa(tce_alloc_start), prot,
 					 mmu_linear_psize, mmu_kernel_ssize));
 	}
 
@@ -1117,8 +1137,7 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
 	unsigned long hash, hpteg;
 	unsigned long vsid = get_kernel_vsid(vaddr, mmu_kernel_ssize);
 	unsigned long va = hpt_va(vaddr, vsid, mmu_kernel_ssize);
-	unsigned long mode = _PAGE_ACCESSED | _PAGE_DIRTY |
-		_PAGE_COHERENT | PP_RWXX | HPTE_R_N;
+	unsigned long mode = htab_convert_pte_flags(PAGE_KERNEL);
 	int ret;
 
 	hash = hpt_hash(va, PAGE_SHIFT, mmu_kernel_ssize);
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 4f7df85129d..036fe2f10c7 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -206,13 +206,10 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size)
 int __meminit vmemmap_populate(struct page *start_page,
 			       unsigned long nr_pages, int node)
 {
-	unsigned long mode_rw;
 	unsigned long start = (unsigned long)start_page;
 	unsigned long end = (unsigned long)(start_page + nr_pages);
 	unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
 
-	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
-
 	/* Align to the page size of the linear mapping. */
 	start = _ALIGN_DOWN(start, page_size);
 
@@ -230,9 +227,9 @@ int __meminit vmemmap_populate(struct page *start_page,
 		pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n",
 			start, p, __pa(p));
 
-		mapped = htab_bolt_mapping(start, start + page_size,
-					__pa(p), mode_rw, mmu_vmemmap_psize,
-					mmu_kernel_ssize);
+		mapped = htab_bolt_mapping(start, start + page_size, __pa(p),
+					   PAGE_KERNEL, mmu_vmemmap_psize,
+					   mmu_kernel_ssize);
 		BUG_ON(mapped < 0);
 	}
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 702691cb9e8..1c93c255873 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -311,7 +311,7 @@ void __init paging_init(void)
 #endif /* CONFIG_HIGHMEM */
 
 	printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n",
-	       (u64)top_of_ram, total_ram);
+	       (unsigned long long)top_of_ram, total_ram);
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (long int)((top_of_ram - total_ram) >> 20));
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index c53145f6194..6aa12081377 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -236,8 +236,8 @@ void __init MMU_init_hw(void)
 
 	Hash_end = (struct hash_pte *) ((unsigned long)Hash + Hash_size);
 
-	printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n",
-	       total_memory >> 20, Hash_size >> 10, Hash);
+	printk("Total memory = %lldMB; using %ldkB for hash table (at %p)\n",
+	       (unsigned long long)(total_memory >> 20), Hash_size >> 10, Hash);
 
 
 	/*
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index 409fcc7b63c..be7dd422c0f 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -34,7 +34,7 @@
 DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
 
 /* This is declared as we are using the more or less generic
- * include/asm-powerpc/tlb.h file -- tgall
+ * arch/powerpc/include/asm/tlb.h file -- tgall
  */
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
index e55746b824b..89ecd76127d 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -24,7 +24,7 @@
 
 static struct resource warp_ndfc = {
 	.start = WARP_NAND_FLASH_REG_ADDR,
-	.end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE,
+	.end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1,
 	.flags = IORESOURCE_MEM,
 };
 
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 9565995cba7..960edf89be5 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -30,18 +30,6 @@ static __initdata struct of_device_id warp_of_bus[] = {
 	{},
 };
 
-static __initdata struct i2c_board_info warp_i2c_info[] = {
-	{ I2C_BOARD_INFO("ad7414", 0x4a) }
-};
-
-static int __init warp_arch_init(void)
-{
-	/* This should go away once support is moved to the dts. */
-	i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info));
-	return 0;
-}
-machine_arch_initcall(warp, warp_arch_init);
-
 static int __init warp_device_probe(void)
 {
 	of_platform_bus_probe(NULL, warp_of_bus, NULL);
@@ -223,7 +211,7 @@ static void pika_setup_critical_temp(struct i2c_client *client)
 
 	/* These registers are in 1 degree increments. */
 	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
-	i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */
+	i2c_smbus_write_byte_data(client, 3,  0); /* Tlow */
 
 	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
 	if (np == NULL) {
@@ -289,8 +277,15 @@ found_it:
 	printk(KERN_INFO "PIKA DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
-		u16 temp = swab16(i2c_smbus_read_word_data(client, 0));
-		out_be32(fpga + 0x20, temp);
+		int val;
+
+		val = i2c_smbus_read_word_data(client, 0);
+		if (val < 0)
+			dev_dbg(&client->dev, "DTM read temp failed.\n");
+		else {
+			s16 temp = swab16(val);
+			out_be32(fpga + 0x20, temp);
+		}
 
 		pika_dtm_check_fan(fpga);
 
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index daf0e1568d6..b8a52062738 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -1,10 +1,8 @@
 #
 # Makefile for 52xx based boards
 #
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y				+= mpc52xx_pic.o mpc52xx_common.o
 obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
-endif
 
 obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o
 obj-$(CONFIG_PPC_EFIKA)		+= efika.o
@@ -15,4 +13,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y)
 	obj-$(CONFIG_PM)	+= lite5200_sleep.o lite5200_pm.o
 endif
 
-obj-$(CONFIG_PPC_MPC5200_GPIO)	+= mpc52xx_gpio.o
\ No newline at end of file
+obj-$(CONFIG_PPC_MPC5200_GPIO)	+= mpc52xx_gpio.o
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index dd4be4aee31..ec43477caa6 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -105,6 +105,7 @@ static void __init mpc832x_sys_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index f049d692d4c..0300268ce5b 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -115,6 +115,7 @@ static void __init mpc832x_rdb_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 7301d77a08e..76092d37c7d 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,6 +41,7 @@
 
 static struct of_device_id __initdata mpc834x_itx_ids[] = {
 	{ .compatible = "fsl,pq2pro-localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 30d509aa9f0..fc3f2ed1f3e 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -111,6 +111,7 @@ static void __init mpc834x_mds_init_IRQ(void)
 static struct of_device_id mpc834x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 75b80e83657..9d46e5bdd10 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -136,6 +136,7 @@ static void __init mpc836x_mds_setup_arch(void)
 static struct of_device_id mpc836x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index fc21f5c15ba..156c4e21800 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -83,6 +83,7 @@ static void __init sbc834x_init_IRQ(void)
 static struct __initdata of_device_id sbc834x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 2145adeb220..8a3b117b6ce 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -222,6 +222,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m)
 
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
+	{ .type = "simple-bus", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
 	{},
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 6b846aa1ced..1bf5aefdfeb 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -91,6 +91,7 @@ static void __init mpc8536_ds_setup_arch(void)
 static struct of_device_id __initdata mpc8536_ds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index ba498d6f2d0..d17807a6b89 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -230,6 +230,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 00c53580664..483b65cbaba 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -186,6 +186,7 @@ static int __init mpc8544_ds_probe(void)
 static struct of_device_id __initdata mpc85xxds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 43a459f63e3..2494c515591 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -260,6 +260,7 @@ machine_arch_initcall(mpc85xx_mds, board_fixups);
 static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 2c580cd24e4..6509ade7166 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -217,6 +217,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index 835f2dc24dc..014e26cda08 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -19,7 +19,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/pci-bridge.h>
-#include <asm-powerpc/mpic.h>
+#include <asm/mpic.h>
 #include <asm/mpc86xx.h>
 #include <asm/cacheflush.h>
 
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 6fc849e51e4..71d7562e190 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -105,6 +105,16 @@ config 8xx_COPYBACK
 
 	  If in doubt, say Y here.
 
+config 8xx_GPIO
+	bool "GPIO API Support"
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Saying Y here will cause the ports on an MPC8xx processor to be used
+	  with the GPIO API.  If you say N here, the kernel needs less memory.
+
+	  If in doubt, say Y here.
+
 config 8xx_CPU6
 	bool "CPU6 Silicon Errata (860 Pre Rev. C)"
 	help
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 1d0968775c0..4c900efa164 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -254,6 +254,8 @@ config CPM2
 	select CPM
 	select PPC_LIB_RHEAP
 	select PPC_PCI_CHOICE
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
@@ -281,6 +283,7 @@ config FSL_ULI1575
 
 config CPM
 	bool
+	select PPC_CLOCK
 
 config OF_RTC
 	bool
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 423a0234dc3..8079e0b4fd6 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -1,13 +1,7 @@
 
 obj-$(CONFIG_FSL_ULI1575)	+= fsl_uli1575.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_PMAC)		+= powermac/
-else
-ifeq ($(CONFIG_PPC64),y)
-obj-$(CONFIG_PPC_PMAC)		+= powermac/
-endif
-endif
 obj-$(CONFIG_PPC_CHRP)		+= chrp/
 obj-$(CONFIG_40x)		+= 40x/
 obj-$(CONFIG_44x)		+= 44x/
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
index 69288f65314..3233fe84d15 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
@@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb,
 	struct cpufreq_frequency_table *cbe_freqs;
 	u8 node;
 
+	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
+	 * and CPUFREQ_NOTIFY policy events?)
+	 */
+	if (event == CPUFREQ_START)
+		return 0;
+
 	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
 	node = cbe_cpu_to_node(policy->cpu);
 
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index f7edba6cb79..c9bb7cfd3dc 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -206,11 +206,6 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc)
 			(SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE);
 		if (runcntl == 0)
 			runcntl = SPU_RUNCNTL_RUNNABLE;
-	}
-
-	if (ctx->flags & SPU_CREATE_NOSCHED) {
-		spuctx_switch_state(ctx, SPU_UTIL_USER);
-		ctx->ops->runcntl_write(ctx, runcntl);
 	} else {
 		unsigned long privcntl;
 
@@ -219,9 +214,15 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc)
 		else
 			privcntl = SPU_PRIVCNTL_MODE_NORMAL;
 
-		ctx->ops->npc_write(ctx, *npc);
 		ctx->ops->privcntl_write(ctx, privcntl);
-		ctx->ops->runcntl_write(ctx, runcntl);
+		ctx->ops->npc_write(ctx, *npc);
+	}
+
+	ctx->ops->runcntl_write(ctx, runcntl);
+
+	if (ctx->flags & SPU_CREATE_NOSCHED) {
+		spuctx_switch_state(ctx, SPU_UTIL_USER);
+	} else {
 
 		if (ctx->state == SPU_STATE_SAVED) {
 			ret = spu_activate(ctx, 0);
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 2deeeba7ecc..67595bc380d 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -641,9 +641,12 @@ static struct spu *find_victim(struct spu_context *ctx)
 
 			if (tmp && tmp->prio > ctx->prio &&
 			    !(tmp->flags & SPU_CREATE_NOSCHED) &&
-			    (!victim || tmp->prio > victim->prio))
+			    (!victim || tmp->prio > victim->prio)) {
 				victim = spu->ctx;
+			}
 		}
+		if (victim)
+			get_spu_context(victim);
 		mutex_unlock(&cbe_spu_info[node].list_mutex);
 
 		if (victim) {
@@ -658,6 +661,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 			 * look at another context or give up after X retries.
 			 */
 			if (!mutex_trylock(&victim->state_mutex)) {
+				put_spu_context(victim);
 				victim = NULL;
 				goto restart;
 			}
@@ -670,6 +674,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 				 * restart the search.
 				 */
 				mutex_unlock(&victim->state_mutex);
+				put_spu_context(victim);
 				victim = NULL;
 				goto restart;
 			}
@@ -687,6 +692,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 				spu_add_to_rq(victim);
 
 			mutex_unlock(&victim->state_mutex);
+			put_spu_context(victim);
 
 			return spu;
 		}
@@ -722,17 +728,33 @@ static void spu_schedule(struct spu *spu, struct spu_context *ctx)
 	/* not a candidate for interruptible because it's called either
 	   from the scheduler thread or from spu_deactivate */
 	mutex_lock(&ctx->state_mutex);
-	__spu_schedule(spu, ctx);
+	if (ctx->state == SPU_STATE_SAVED)
+		__spu_schedule(spu, ctx);
 	spu_release(ctx);
 }
 
-static void spu_unschedule(struct spu *spu, struct spu_context *ctx)
+/**
+ * spu_unschedule - remove a context from a spu, and possibly release it.
+ * @spu:	The SPU to unschedule from
+ * @ctx:	The context currently scheduled on the SPU
+ * @free_spu	Whether to free the SPU for other contexts
+ *
+ * Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the
+ * SPU is made available for other contexts (ie, may be returned by
+ * spu_get_idle). If this is zero, the caller is expected to schedule another
+ * context to this spu.
+ *
+ * Should be called with ctx->state_mutex held.
+ */
+static void spu_unschedule(struct spu *spu, struct spu_context *ctx,
+		int free_spu)
 {
 	int node = spu->node;
 
 	mutex_lock(&cbe_spu_info[node].list_mutex);
 	cbe_spu_info[node].nr_active--;
-	spu->alloc_state = SPU_FREE;
+	if (free_spu)
+		spu->alloc_state = SPU_FREE;
 	spu_unbind_context(spu, ctx);
 	ctx->stats.invol_ctx_switch++;
 	spu->stats.invol_ctx_switch++;
@@ -832,7 +854,7 @@ static int __spu_deactivate(struct spu_context *ctx, int force, int max_prio)
 	if (spu) {
 		new = grab_runnable_context(max_prio, spu->node);
 		if (new || force) {
-			spu_unschedule(spu, ctx);
+			spu_unschedule(spu, ctx, new == NULL);
 			if (new) {
 				if (new->flags & SPU_CREATE_NOSCHED)
 					wake_up(&new->stop_wq);
@@ -905,7 +927,7 @@ static noinline void spusched_tick(struct spu_context *ctx)
 
 	new = grab_runnable_context(ctx->prio + 1, spu->node);
 	if (new) {
-		spu_unschedule(spu, ctx);
+		spu_unschedule(spu, ctx, 0);
 		if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 			spu_add_to_rq(ctx);
 	} else {
@@ -985,9 +1007,11 @@ static int spusched_thread(void *unused)
 				struct spu_context *ctx = spu->ctx;
 
 				if (ctx) {
+					get_spu_context(ctx);
 					mutex_unlock(mtx);
 					spusched_tick(ctx);
 					mutex_lock(mtx);
+					put_spu_context(ctx);
 				}
 			}
 			mutex_unlock(mtx);
@@ -1030,7 +1054,7 @@ void spuctx_switch_state(struct spu_context *ctx,
 		node = spu->node;
 		if (old_state == SPU_UTIL_USER)
 			atomic_dec(&cbe_spu_info[node].busy_spus);
-		if (new_state == SPU_UTIL_USER);
+		if (new_state == SPU_UTIL_USER)
 			atomic_inc(&cbe_spu_info[node].busy_spus);
 	}
 }
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index ea3e541ac74..45ffd8e542f 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -7,15 +7,6 @@ config PPC_ISERIES
 menu "iSeries device drivers"
 	depends on PPC_ISERIES
 
-config VIOCONS
-	bool "iSeries Virtual Console Support (Obsolete)"
-	depends on !HVC_ISERIES
-	default n
-	help
-	  This is the old virtual console driver for legacy iSeries.
-	  You should use the iSeries Hypervisor Virtual Console
-	  support instead.
-
 config VIODASD
 	tristate "iSeries Virtual I/O disk support"
 	help
@@ -38,5 +29,5 @@ endmenu
 
 config VIOPATH
 	bool
-	depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || ISERIES_VETH
+	depends on VIODASD || VIOCD || VIOTAPE || ISERIES_VETH
 	default y
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 89774177b20..be60d64be7a 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -2,12 +2,12 @@ CFLAGS_bootx_init.o  		+= -fPIC
 
 ifdef CONFIG_FTRACE
 # Do not trace early boot code
-CFLAGS_REMOVE_bootx_init.o = -pg
+CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog
 endif
 
 obj-y				+= pic.o setup.o time.o feature.o pci.o \
 				   sleep.o low_i2c.o cache.o pfunc_core.o \
-				   pfunc_base.o
+				   pfunc_base.o udbg_scc.o udbg_adb.o
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= backlight.o
 obj-$(CONFIG_CPU_FREQ_PMAC)	+= cpufreq_32.o
 obj-$(CONFIG_CPU_FREQ_PMAC64)	+= cpufreq_64.o
@@ -19,4 +19,3 @@ obj-$(CONFIG_NVRAM:m=y)		+= nvram.o
 obj-$(CONFIG_PPC64)		+= nvram.o
 obj-$(CONFIG_PPC32)		+= bootx_init.o
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_PPC_MERGE)		+= udbg_scc.o udbg_adb.o
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 1cf901fa903..6eb1d4d182c 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -29,138 +29,75 @@
 
 #include "platform.h"
 
-#if defined(DEBUG)
-#define DBG udbg_printf
-#else
-#define DBG pr_debug
-#endif
-
-static struct hash_pte *htab;
-static unsigned long htab_addr;
-static unsigned char *bolttab;
-static unsigned char *inusetab;
-
-static DEFINE_SPINLOCK(ps3_bolttab_lock);
-
-#define debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g) \
-	_debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g, __func__, __LINE__)
-static void _debug_dump_hpte(unsigned long pa, unsigned long va,
-	unsigned long group, unsigned long bitmap, struct hash_pte lhpte,
-	int psize, unsigned long slot, const char* func, int line)
-{
-	DBG("%s:%d: pa     = %lxh\n", func, line, pa);
-	DBG("%s:%d: lpar   = %lxh\n", func, line,
-		ps3_mm_phys_to_lpar(pa));
-	DBG("%s:%d: va     = %lxh\n", func, line, va);
-	DBG("%s:%d: group  = %lxh\n", func, line, group);
-	DBG("%s:%d: bitmap = %lxh\n", func, line, bitmap);
-	DBG("%s:%d: hpte.v = %lxh\n", func, line, lhpte.v);
-	DBG("%s:%d: hpte.r = %lxh\n", func, line, lhpte.r);
-	DBG("%s:%d: psize  = %xh\n", func, line, psize);
-	DBG("%s:%d: slot   = %lxh\n", func, line, slot);
-}
+/**
+ * enum lpar_vas_id - id of LPAR virtual address space.
+ * @lpar_vas_id_current: Current selected virtual address space
+ *
+ * Identify the target LPAR address space.
+ */
+
+enum ps3_lpar_vas_id {
+	PS3_LPAR_VAS_ID_CURRENT = 0,
+};
+
+
+static DEFINE_SPINLOCK(ps3_htab_lock);
 
 static long ps3_hpte_insert(unsigned long hpte_group, unsigned long va,
 	unsigned long pa, unsigned long rflags, unsigned long vflags,
 	int psize, int ssize)
 {
-	unsigned long slot;
-	struct hash_pte lhpte;
-	int secondary = 0;
-	unsigned long result;
-	unsigned long bitmap;
+	int result;
+	u64 hpte_v, hpte_r;
+	u64 inserted_index;
+	u64 evicted_v, evicted_r;
+	u64 hpte_v_array[4], hpte_rs;
 	unsigned long flags;
-	unsigned long p_pteg, s_pteg, b_index, b_mask, cb, ci;
-
-	vflags &= ~HPTE_V_SECONDARY; /* this bit is ignored */
-
-	lhpte.v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M) |
-		vflags | HPTE_V_VALID;
-	lhpte.r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags;
-
-	p_pteg = hpte_group / HPTES_PER_GROUP;
-	s_pteg = ~p_pteg & htab_hash_mask;
-
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
-
-	BUG_ON(bolttab[p_pteg] == 0xff && bolttab[s_pteg] == 0xff);
+	long ret = -1;
 
-	bitmap = (inusetab[p_pteg] << 8) | inusetab[s_pteg];
+	/*
+	 * lv1_insert_htab_entry() will search for victim
+	 * entry in both primary and secondary pte group
+	 */
+	vflags &= ~HPTE_V_SECONDARY;
 
-	if (bitmap == 0xffff) {
-		/*
-		 * PTEG is full. Search for victim.
-		 */
-		bitmap &= ~((bolttab[p_pteg] << 8) | bolttab[s_pteg]);
-		do {
-			ci = mftb() & 15;
-			cb = 0x8000UL >> ci;
-		} while ((cb & bitmap) == 0);
-	} else {
-		/*
-		 * search free slot in hardware order
-		 *	[primary]	0, 2, 4, 6, 1, 3, 5, 7
-		 *	[secondary]	0, 2, 4, 6, 1, 3, 5, 7
-		 */
-		for (ci = 0; ci < HPTES_PER_GROUP; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = 1; ci < HPTES_PER_GROUP; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = HPTES_PER_GROUP; ci < HPTES_PER_GROUP*2; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = HPTES_PER_GROUP+1; ci < HPTES_PER_GROUP*2; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-	}
+	hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID;
+	hpte_r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags;
 
-found:
-	if (ci < HPTES_PER_GROUP) {
-		slot = p_pteg * HPTES_PER_GROUP + ci;
-	} else {
-		slot = s_pteg * HPTES_PER_GROUP + (ci & 7);
-		/* lhpte.dw0.dw0.h = 1; */
-		vflags |= HPTE_V_SECONDARY;
-		lhpte.v |= HPTE_V_SECONDARY;
-	}
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	result = lv1_write_htab_entry(0, slot, lhpte.v, lhpte.r);
+	/* talk hvc to replace entries BOLTED == 0 */
+	result = lv1_insert_htab_entry(PS3_LPAR_VAS_ID_CURRENT, hpte_group,
+				       hpte_v, hpte_r,
+				       HPTE_V_BOLTED, 0,
+				       &inserted_index,
+				       &evicted_v, &evicted_r);
 
 	if (result) {
-		debug_dump_hpte(pa, va, hpte_group, bitmap, lhpte, psize, slot);
+		/* all entries bolted !*/
+		pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%lx r=%lx\n",
+			__func__, result, va, pa, hpte_group, hpte_v, hpte_r);
 		BUG();
 	}
 
 	/*
-	 * If used slot is not in primary HPTE group,
-	 * the slot should be in secondary HPTE group.
+	 * see if the entry is inserted into secondary pteg
 	 */
+	result = lv1_read_htab_entries(PS3_LPAR_VAS_ID_CURRENT,
+				       inserted_index & ~0x3UL,
+				       &hpte_v_array[0], &hpte_v_array[1],
+				       &hpte_v_array[2], &hpte_v_array[3],
+				       &hpte_rs);
+	BUG_ON(result);
 
-	if ((hpte_group ^ slot) & ~(HPTES_PER_GROUP - 1)) {
-		secondary = 1;
-		b_index = s_pteg;
-	} else {
-		secondary = 0;
-		b_index = p_pteg;
-	}
+	if (hpte_v_array[inserted_index % 4] & HPTE_V_SECONDARY)
+		ret = (inserted_index & 7) | (1 << 3);
+	else
+		ret = inserted_index & 7;
 
-	b_mask = (lhpte.v & HPTE_V_BOLTED) ? 1 << 7 : 0 << 7;
-	bolttab[b_index] |= b_mask >> (slot & 7);
-	b_mask = 1 << 7;
-	inusetab[b_index] |= b_mask >> (slot & 7);
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
 
-	return (slot & 7) | (secondary << 3);
+	return ret;
 }
 
 static long ps3_hpte_remove(unsigned long hpte_group)
@@ -172,39 +109,48 @@ static long ps3_hpte_remove(unsigned long hpte_group)
 static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp,
 	unsigned long va, int psize, int ssize, int local)
 {
+	int result;
+	u64 hpte_v, want_v, hpte_rs;
+	u64 hpte_v_array[4];
 	unsigned long flags;
-	unsigned long result;
-	unsigned long pteg, bit;
-	unsigned long hpte_v, want_v;
+	long ret;
 
-	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
+	want_v = hpte_encode_v(va, psize, ssize);
 
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	hpte_v = htab[slot].v;
-	if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
-		spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
-
-		/* ps3_hpte_insert() will be used to update PTE */
-		return -1;
-	}
-
-	result = lv1_write_htab_entry(0, slot, 0, 0);
+	result = lv1_read_htab_entries(PS3_LPAR_VAS_ID_CURRENT, slot & ~0x3UL,
+				       &hpte_v_array[0], &hpte_v_array[1],
+				       &hpte_v_array[2], &hpte_v_array[3],
+				       &hpte_rs);
 
 	if (result) {
-		DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n",
-		       __func__, va, slot, psize, result, result);
+		pr_info("%s: res=%d read va=%lx slot=%lx psize=%d\n",
+			__func__, result, va, slot, psize);
 		BUG();
 	}
 
-	pteg = slot / HPTES_PER_GROUP;
-	bit = slot % HPTES_PER_GROUP;
-	inusetab[pteg] &= ~(0x80 >> bit);
+	hpte_v = hpte_v_array[slot % 4];
 
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	/*
+	 * As lv1_read_htab_entries() does not give us the RPN, we can
+	 * not synthesize the new hpte_r value here, and therefore can
+	 * not update the hpte with lv1_insert_htab_entry(), so we
+	 * insted invalidate it and ask the caller to update it via
+	 * ps3_hpte_insert() by returning a -1 value.
+	 */
+	if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
+		/* not found */
+		ret = -1;
+	} else {
+		/* entry found, just invalidate it */
+		result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT,
+					      slot, 0, 0);
+		ret = -1;
+	}
 
-	/* ps3_hpte_insert() will be used to update PTE */
-	return -1;
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
+	return ret;
 }
 
 static void ps3_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
@@ -217,45 +163,35 @@ static void ps3_hpte_invalidate(unsigned long slot, unsigned long va,
 	int psize, int ssize, int local)
 {
 	unsigned long flags;
-	unsigned long result;
-	unsigned long pteg, bit;
+	int result;
+
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
-	result = lv1_write_htab_entry(0, slot, 0, 0);
+	result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, slot, 0, 0);
 
 	if (result) {
-		DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n",
-		       __func__, va, slot, psize, result, result);
+		pr_info("%s: res=%d va=%lx slot=%lx psize=%d\n",
+			__func__, result, va, slot, psize);
 		BUG();
 	}
 
-	pteg = slot / HPTES_PER_GROUP;
-	bit = slot % HPTES_PER_GROUP;
-	inusetab[pteg] &= ~(0x80 >> bit);
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
 }
 
 static void ps3_hpte_clear(void)
 {
-	int result;
-
-	DBG(" -> %s:%d\n", __func__, __LINE__);
+	unsigned long hpte_count = (1UL << ppc64_pft_size) >> 4;
+	u64 i;
 
-	result = lv1_unmap_htab(htab_addr);
-	BUG_ON(result);
+	for (i = 0; i < hpte_count; i++)
+		lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, i, 0, 0);
 
 	ps3_mm_shutdown();
 	ps3_mm_vas_destroy();
-
-	DBG(" <- %s:%d\n", __func__, __LINE__);
 }
 
 void __init ps3_hpte_init(unsigned long htab_size)
 {
-	long bitmap_size;
-
-	DBG(" -> %s:%d\n", __func__, __LINE__);
-
 	ppc_md.hpte_invalidate = ps3_hpte_invalidate;
 	ppc_md.hpte_updatepp = ps3_hpte_updatepp;
 	ppc_md.hpte_updateboltedpp = ps3_hpte_updateboltedpp;
@@ -264,28 +200,5 @@ void __init ps3_hpte_init(unsigned long htab_size)
 	ppc_md.hpte_clear_all = ps3_hpte_clear;
 
 	ppc64_pft_size = __ilog2(htab_size);
-
-	bitmap_size = htab_size / sizeof(struct hash_pte) / 8;
-
-	bolttab = __va(lmb_alloc(bitmap_size, 1));
-	inusetab = __va(lmb_alloc(bitmap_size, 1));
-
-	memset(bolttab, 0, bitmap_size);
-	memset(inusetab, 0, bitmap_size);
-
-	DBG(" <- %s:%d\n", __func__, __LINE__);
 }
 
-void __init ps3_map_htab(void)
-{
-	long result;
-	unsigned long htab_size = (1UL << ppc64_pft_size);
-
-	result = lv1_map_htab(0, &htab_addr);
-
-	htab = (__force struct hash_pte *)ioremap_flags(htab_addr, htab_size,
-					    pgprot_val(PAGE_READONLY_X));
-
-	DBG("%s:%d: lpar %016lxh, virt %016lxh\n", __func__, __LINE__,
-		htab_addr, (unsigned long)htab);
-}
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index a413abbd412..77bc330263c 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -201,7 +201,6 @@ static void __init ps3_setup_arch(void)
 	       ps3_firmware_version.rev);
 
 	ps3_spu_set_platform();
-	ps3_map_htab();
 
 #ifdef CONFIG_SMP
 	smp_init_ps3();
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index d135cef9ed6..ccae3d446b9 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -186,14 +186,24 @@ static void spu_unmap(struct spu *spu)
 	iounmap(spu_pdata(spu)->shadow);
 }
 
+/**
+ * setup_areas - Map the spu regions into the address space.
+ *
+ * The current HV requires the spu shadow regs to be mapped with the
+ * PTE page protection bits set as read-only (PP=3).  This implementation
+ * uses the low level __ioremap() to bypass the page protection settings
+ * inforced by ioremap_flags() to get the needed PTE bits set for the
+ * shadow regs.
+ */
+
 static int __init setup_areas(struct spu *spu)
 {
 	struct table {char* name; unsigned long addr; unsigned long size;};
+	static const unsigned long shadow_flags = _PAGE_NO_CACHE | 3;
 
-	spu_pdata(spu)->shadow = ioremap_flags(spu_pdata(spu)->shadow_addr,
-					       sizeof(struct spe_shadow),
-					       pgprot_val(PAGE_READONLY) |
-					       _PAGE_NO_CACHE);
+	spu_pdata(spu)->shadow = __ioremap(spu_pdata(spu)->shadow_addr,
+					   sizeof(struct spe_shadow),
+					   shadow_flags);
 	if (!spu_pdata(spu)->shadow) {
 		pr_debug("%s:%d: ioremap shadow failed\n", __func__, __LINE__);
 		goto fail_ioremap;
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index a437267c6bf..d967c1893ab 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -2,6 +2,7 @@
 #define _PSERIES_PLPAR_WRAPPERS_H
 
 #include <asm/hvcall.h>
+#include <asm/page.h>
 
 static inline long poll_pending(void)
 {
@@ -44,12 +45,34 @@ static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa)
 
 static inline long plpar_page_set_loaned(unsigned long vpa)
 {
-	return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa, 0);
+	unsigned long cmo_page_sz = cmo_get_page_size();
+	long rc = 0;
+	int i;
+
+	for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
+		rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa + i, 0);
+
+	for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
+		plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE,
+				   vpa + i - cmo_page_sz, 0);
+
+	return rc;
 }
 
 static inline long plpar_page_set_active(unsigned long vpa)
 {
-	return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa, 0);
+	unsigned long cmo_page_sz = cmo_get_page_size();
+	long rc = 0;
+	int i;
+
+	for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
+		rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa + i, 0);
+
+	for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
+		plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED,
+				   vpa + i - cmo_page_sz, 0);
+
+	return rc;
 }
 
 extern void vpa_init(int cpu);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 063a0d2fba3..7b01d67b4e4 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -68,6 +68,10 @@
 #include "plpar_wrappers.h"
 #include "pseries.h"
 
+int CMO_PrPSP = -1;
+int CMO_SecPSP = -1;
+unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT);
+EXPORT_SYMBOL(CMO_PageSize);
 
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 
@@ -325,8 +329,7 @@ void pSeries_cmo_feature_init(void)
 {
 	char *ptr, *key, *value, *end;
 	int call_status;
-	int PrPSP = -1;
-	int SecPSP = -1;
+	int page_order = IOMMU_PAGE_SHIFT;
 
 	pr_debug(" -> fw_cmo_feature_init()\n");
 	spin_lock(&rtas_data_buf_lock);
@@ -365,21 +368,31 @@ void pSeries_cmo_feature_init(void)
 				break;
 			}
 
-			if (0 == strcmp(key, "PrPSP"))
-				PrPSP = simple_strtol(value, NULL, 10);
+			if (0 == strcmp(key, "CMOPageSize"))
+				page_order = simple_strtol(value, NULL, 10);
+			else if (0 == strcmp(key, "PrPSP"))
+				CMO_PrPSP = simple_strtol(value, NULL, 10);
 			else if (0 == strcmp(key, "SecPSP"))
-				SecPSP = simple_strtol(value, NULL, 10);
+				CMO_SecPSP = simple_strtol(value, NULL, 10);
 			value = key = ptr + 1;
 		}
 		ptr++;
 	}
 
-	if (PrPSP != -1 || SecPSP != -1) {
+	/* Page size is returned as the power of 2 of the page size,
+	 * convert to the page size in bytes before returning
+	 */
+	CMO_PageSize = 1 << page_order;
+	pr_debug("CMO_PageSize = %lu\n", CMO_PageSize);
+
+	if (CMO_PrPSP != -1 || CMO_SecPSP != -1) {
 		pr_info("CMO enabled\n");
-		pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+		pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
+		         CMO_SecPSP);
 		powerpc_firmware_features |= FW_FEATURE_CMO;
 	} else
-		pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+		pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
+		         CMO_SecPSP);
 	spin_unlock(&rtas_data_buf_lock);
 	pr_debug(" <- fw_cmo_feature_init()\n");
 }
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 16a0ed28eb0..a90054b56d5 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_MV64X60)		+= $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
 obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc_cmos_setup.o
 obj-$(CONFIG_AXON_RAM)		+= axonram.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_IPIC)		+= ipic.o
@@ -36,7 +35,6 @@ obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
 endif
-endif
 
 # Temporary hack until we have migrated to asm-powerpc
 ifeq ($(ARCH),powerpc)
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/arch/powerpc/sysdev/bestcomm/gen_bd.c
index a3a134c35b0..e0a53e3147b 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.c
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.c
@@ -11,7 +11,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 661df42830b..4a04823e842 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/spinlock.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
@@ -42,6 +43,10 @@
 
 #include <asm/fs_pd.h>
 
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
 #define CPM_MAP_SIZE    (0x4000)
 
 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
@@ -290,20 +295,24 @@ struct cpm_ioport16 {
 	__be16 res[3];
 };
 
-struct cpm_ioport32 {
-	__be32 dir, par, sor;
+struct cpm_ioport32b {
+	__be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+	__be32 dir, par, sor, odr, dat;
 };
 
 static void cpm1_set_pin32(int port, int pin, int flags)
 {
-	struct cpm_ioport32 __iomem *iop;
+	struct cpm_ioport32e __iomem *iop;
 	pin = 1 << (31 - pin);
 
 	if (port == CPM_PORTB)
-		iop = (struct cpm_ioport32 __iomem *)
+		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pbdir;
 	else
-		iop = (struct cpm_ioport32 __iomem *)
+		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pedir;
 
 	if (flags & CPM_PIN_OUTPUT)
@@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
 
 	return 0;
 }
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u16 cpdata;
+};
+
+static inline struct cpm1_gpio16_chip *
+to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+}
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be16(&iop->dat, cpm1_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	setbits16(&iop->dir, pin_mask);
+
+	cpm1_gpio16_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	clrbits16(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add16(struct device_node *np)
+{
+	struct cpm1_gpio16_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio16_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 16;
+	gc->direction_input = cpm1_gpio16_dir_in;
+	gc->direction_output = cpm1_gpio16_dir_out;
+	gc->get = cpm1_gpio16_get;
+	gc->set = cpm1_gpio16_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+
+struct cpm1_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct cpm1_gpio32_chip *
+to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+}
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm1_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	setbits32(&iop->dir, pin_mask);
+
+	cpm1_gpio32_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add32(struct device_node *np)
+{
+	struct cpm1_gpio32_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio32_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 32;
+	gc->direction_input = cpm1_gpio32_dir_in;
+	gc->direction_output = cpm1_gpio32_dir_out;
+	gc->get = cpm1_gpio32_get;
+	gc->set = cpm1_gpio32_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+
+static int cpm_init_par_io(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
+		cpm1_gpiochip_add16(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
+		cpm1_gpiochip_add32(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
+		cpm1_gpiochip_add16(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
+		cpm1_gpiochip_add16(np);
+
+	/* Port E uses CPM2 layout */
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
+		cpm2_gpiochip_add32(np);
+	return 0;
+}
+arch_initcall(cpm_init_par_io);
+
+#endif /* CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 5a6c5dfc53e..f1c3395633b 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command);
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK	(get_brgfreq())
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
+void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
 {
 	u32 __iomem *bp;
+	u32 val;
 
 	/* This is good enough to get SMCs running.....
 	*/
@@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate)
 		brg -= 4;
 	}
 	bp += brg;
-	out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
-
-	cpm2_unmap(bp);
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-	u32 __iomem *bp;
-	u32 val;
-
-	if (brg < 4) {
-		bp = cpm2_map_size(im_brgc1, 16);
-	} else {
-		bp = cpm2_map_size(im_brgc5, 16);
-		brg -= 4;
-	}
-	bp += brg;
-	val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
 	if (div16)
 		val |= CPM_BRG_DIV16;
 
 	out_be32(bp, val);
 	cpm2_unmap(bp);
 }
+EXPORT_SYMBOL(__cpm2_setbrg);
 
 int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 {
@@ -377,3 +351,14 @@ void cpm2_set_pin(int port, int pin, int flags)
 	else
 		clrbits32(&iop[port].odr, pin);
 }
+
+static int cpm_init_par_io(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank")
+		cpm2_gpiochip_add32(np);
+	return 0;
+}
+arch_initcall(cpm_init_par_io);
+
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e4b7296acb2..00d3d17c84a 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -19,6 +19,8 @@
 
 #include <linux/init.h>
 #include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
 
 #include <asm/udbg.h>
 #include <asm/io.h>
@@ -28,6 +30,10 @@
 
 #include <mm/mmu_decl.h>
 
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+#include <linux/of_gpio.h>
+#endif
+
 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
 static u32 __iomem *cpm_udbg_txdesc =
 	(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
@@ -207,3 +213,135 @@ dma_addr_t cpm_muram_dma(void __iomem *addr)
 	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
 }
 EXPORT_SYMBOL(cpm_muram_dma);
+
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+
+struct cpm2_ioports {
+	u32 dir, par, sor, odr, dat;
+	u32 res[3];
+};
+
+struct cpm2_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct cpm2_gpio32_chip *
+to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc);
+}
+
+static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+	cpm2_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void __cpm2_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
+	int value)
+{
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+	if (value)
+		cpm2_gc->cpdata |= pin_mask;
+	else
+		cpm2_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm2_gc->cpdata);
+}
+
+static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	__cpm2_gpio32_set(mm_gc, pin_mask, value);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+}
+
+static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	setbits32(&iop->dir, pin_mask);
+	__cpm2_gpio32_set(mm_gc, pin_mask, val);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+
+	return 0;
+}
+
+static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+
+	return 0;
+}
+
+int cpm2_gpiochip_add32(struct device_node *np)
+{
+	struct cpm2_gpio32_chip *cpm2_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
+	if (!cpm2_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm2_gc->lock);
+
+	mm_gc = &cpm2_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm2_gpio32_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 32;
+	gc->direction_input = cpm2_gpio32_dir_in;
+	gc->direction_output = cpm2_gpio32_dir_out;
+	gc->get = cpm2_gpio32_get;
+	gc->set = cpm2_gpio32_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 1aecb075a72..25fbbfaa837 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -208,6 +208,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
 	if (uccf->uf_regs == NULL) {
 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+		kfree(uccf);
 		return -ENOMEM;
 	}
 
@@ -355,6 +356,9 @@ void ucc_fast_free(struct ucc_fast_private * uccf)
 	if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
 		qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
 
+	if (uccf->uf_regs)
+		iounmap(uccf->uf_regs);
+
 	kfree(uccf);
 }
 EXPORT_SYMBOL(ucc_fast_free);
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index a578bc77b9d..e1d6a134015 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -171,6 +171,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
 	if (uccs->us_regs == NULL) {
 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+		kfree(uccs);
 		return -ENOMEM;
 	}
 
@@ -367,10 +368,11 @@ void ucc_slow_free(struct ucc_slow_private * uccs)
 	if (uccs->tx_base_offset)
 		qe_muram_free(uccs->tx_base_offset);
 
-	if (uccs->us_pram) {
+	if (uccs->us_pram)
 		qe_muram_free(uccs->us_pram_offset);
-		uccs->us_pram = NULL;
-	}
+
+	if (uccs->us_regs)
+		iounmap(uccs->us_regs);
 
 	kfree(uccs);
 }
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index c09ddc0dbeb..c1879ebfd4f 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -21,6 +21,7 @@ static int  __init add_rtc(void)
 	struct device_node *np;
 	struct platform_device *pd;
 	struct resource res[2];
+	unsigned int num_res = 1;
 	int ret;
 
 	memset(&res, 0, sizeof(res));
@@ -41,14 +42,24 @@ static int  __init add_rtc(void)
 	if (res[0].start != RTC_PORT(0))
 		return -EINVAL;
 
-	/* Use a fixed interrupt value of 8 since on PPC if we are using this
-	 * its off an i8259 which we ensure has interrupt numbers 0..15. */
-	res[1].start = 8;
-	res[1].end = 8;
-	res[1].flags = IORESOURCE_IRQ;
+	np = of_find_compatible_node(NULL, NULL, "chrp,iic");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL, "pnpPNP,000");
+	if (np) {
+		of_node_put(np);
+		/*
+		 * Use a fixed interrupt value of 8 since on PPC if we are
+		 * using this its off an i8259 which we ensure has interrupt
+		 * numbers 0..15.
+		 */
+		res[1].start = 8;
+		res[1].end = 8;
+		res[1].flags = IORESOURCE_IRQ;
+		num_res++;
+	}
 
 	pd = platform_device_register_simple("rtc_cmos", -1,
-					     &res[0], 2);
+					     &res[0], num_res);
 
 	if (IS_ERR(pd))
 		return PTR_ERR(pd);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2ed88122be9..8d41908e251 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -317,6 +317,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
 	depends on SPARSEMEM
 
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index c5cdb975d59..9b0bc2c9fba 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Fri May 30 09:49:33 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 19:43:29 2008
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -68,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -93,11 +92,17 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -113,6 +118,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -175,6 +181,8 @@ CONFIG_PREEMPT=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -185,8 +193,12 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -198,6 +210,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_MACHCHK_WARNING=y
 CONFIG_QDIO=y
 # CONFIG_QDIO_DEBUG is not set
+CONFIG_CHSC_SCH=m
 
 #
 # Misc
@@ -206,6 +219,7 @@ CONFIG_IPL=y
 # CONFIG_IPL_TAPE is not set
 CONFIG_IPL_VM=y
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=9
 # CONFIG_PROCESS_DEBUG is not set
@@ -226,10 +240,6 @@ CONFIG_S390_HYPFS_FS=y
 CONFIG_KEXEC=y
 # CONFIG_ZFCPDUMP is not set
 CONFIG_S390_GUEST=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -364,7 +374,6 @@ CONFIG_NET_SCH_CBQ=m
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -430,7 +439,9 @@ CONFIG_CCW=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 CONFIG_SYS_HYPERVISOR=y
@@ -507,6 +518,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ZFCP=y
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=m
@@ -522,14 +538,10 @@ CONFIG_DM_CRYPT=y
 CONFIG_DM_SNAPSHOT=y
 CONFIG_DM_MIRROR=y
 CONFIG_DM_ZERO=y
-CONFIG_DM_MULTIPATH=y
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
+CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -544,7 +556,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
 # CONFIG_WAN is not set
@@ -576,7 +587,10 @@ CONFIG_DEVKMEM=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_VIRTIO=m
 # CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
@@ -616,6 +630,7 @@ CONFIG_MONWRITER=m
 CONFIG_S390_VMUR=m
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -693,6 +708,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -712,7 +728,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -780,6 +795,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
@@ -789,6 +805,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_KOBJECT is not set
 # CONFIG_SAMPLE_KPROBES is not set
@@ -847,6 +864,10 @@ CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -895,6 +916,7 @@ CONFIG_BITREVERSE=m
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
 CONFIG_CRC7=m
diff --git a/include/asm-s390/Kbuild b/arch/s390/include/asm/Kbuild
index 63a23415fba..63a23415fba 100644
--- a/include/asm-s390/Kbuild
+++ b/arch/s390/include/asm/Kbuild
diff --git a/include/asm-s390/airq.h b/arch/s390/include/asm/airq.h
index 1ac80d6b058..1ac80d6b058 100644
--- a/include/asm-s390/airq.h
+++ b/arch/s390/include/asm/airq.h
diff --git a/include/asm-s390/appldata.h b/arch/s390/include/asm/appldata.h
index 79283dac828..79283dac828 100644
--- a/include/asm-s390/appldata.h
+++ b/arch/s390/include/asm/appldata.h
diff --git a/include/asm-s390/atomic.h b/arch/s390/include/asm/atomic.h
index 2d184655bc5..2d184655bc5 100644
--- a/include/asm-s390/atomic.h
+++ b/arch/s390/include/asm/atomic.h
diff --git a/include/asm-s390/auxvec.h b/arch/s390/include/asm/auxvec.h
index 0d340720fd9..0d340720fd9 100644
--- a/include/asm-s390/auxvec.h
+++ b/arch/s390/include/asm/auxvec.h
diff --git a/include/asm-s390/bitops.h b/arch/s390/include/asm/bitops.h
index b4eb24ab5af..8e9243ae0c1 100644
--- a/include/asm-s390/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -709,7 +709,7 @@ static inline int find_next_zero_bit (const unsigned long * addr,
 		 * __ffz_word returns __BITOPS_WORDSIZE
 		 * if no zero bit is present in the word.
 		 */
-		set = __ffz_word(0, *p >> bit) + bit;
+		set = __ffz_word(bit, *p >> bit);
 		if (set >= size)
 			return size + offset;
 		if (set < __BITOPS_WORDSIZE)
@@ -824,7 +824,7 @@ static inline int ext2_find_next_zero_bit(void *vaddr, unsigned long size,
 		 * s390 version of ffz returns __BITOPS_WORDSIZE
 		 * if no zero bit is present in the word.
 		 */
-		set = ffz(__load_ulong_le(p, 0) >> bit) + bit;
+		set = __ffz_word(bit, __load_ulong_le(p, 0) >> bit);
 		if (set >= size)
 			return size + offset;
 		if (set < __BITOPS_WORDSIZE)
@@ -865,7 +865,7 @@ static inline int ext2_find_next_bit(void *vaddr, unsigned long size,
 		 * s390 version of ffz returns __BITOPS_WORDSIZE
 		 * if no zero bit is present in the word.
 		 */
-		set = ffs(__load_ulong_le(p, 0) >> bit) + bit;
+		set = __ffs_word(0, __load_ulong_le(p, 0) & (~0UL << bit));
 		if (set >= size)
 			return size + offset;
 		if (set < __BITOPS_WORDSIZE)
diff --git a/include/asm-s390/bug.h b/arch/s390/include/asm/bug.h
index 384e3621e34..384e3621e34 100644
--- a/include/asm-s390/bug.h
+++ b/arch/s390/include/asm/bug.h
diff --git a/include/asm-s390/bugs.h b/arch/s390/include/asm/bugs.h
index 011f1e6a2a6..011f1e6a2a6 100644
--- a/include/asm-s390/bugs.h
+++ b/arch/s390/include/asm/bugs.h
diff --git a/include/asm-s390/byteorder.h b/arch/s390/include/asm/byteorder.h
index 1fe2492baa8..1fe2492baa8 100644
--- a/include/asm-s390/byteorder.h
+++ b/arch/s390/include/asm/byteorder.h
diff --git a/include/asm-s390/cache.h b/arch/s390/include/asm/cache.h
index 9b866816863..9b866816863 100644
--- a/include/asm-s390/cache.h
+++ b/arch/s390/include/asm/cache.h
diff --git a/include/asm-s390/cacheflush.h b/arch/s390/include/asm/cacheflush.h
index 49d5af916d0..49d5af916d0 100644
--- a/include/asm-s390/cacheflush.h
+++ b/arch/s390/include/asm/cacheflush.h
diff --git a/include/asm-s390/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index ba007d8df94..ba007d8df94 100644
--- a/include/asm-s390/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
diff --git a/include/asm-s390/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h
index a27f68985a7..a27f68985a7 100644
--- a/include/asm-s390/ccwgroup.h
+++ b/arch/s390/include/asm/ccwgroup.h
diff --git a/include/asm-s390/checksum.h b/arch/s390/include/asm/checksum.h
index d5a8e7c1477..d5a8e7c1477 100644
--- a/include/asm-s390/checksum.h
+++ b/arch/s390/include/asm/checksum.h
diff --git a/include/asm-s390/chpid.h b/arch/s390/include/asm/chpid.h
index dfe3c7f3439..dfe3c7f3439 100644
--- a/include/asm-s390/chpid.h
+++ b/arch/s390/include/asm/chpid.h
diff --git a/include/asm-s390/chsc.h b/arch/s390/include/asm/chsc.h
index d38d0cf62d4..d38d0cf62d4 100644
--- a/include/asm-s390/chsc.h
+++ b/arch/s390/include/asm/chsc.h
diff --git a/include/asm-s390/cio.h b/arch/s390/include/asm/cio.h
index 6dccb071aec..6dccb071aec 100644
--- a/include/asm-s390/cio.h
+++ b/arch/s390/include/asm/cio.h
diff --git a/include/asm-s390/cmb.h b/arch/s390/include/asm/cmb.h
index 50196857d27..50196857d27 100644
--- a/include/asm-s390/cmb.h
+++ b/arch/s390/include/asm/cmb.h
diff --git a/include/asm-s390/compat.h b/arch/s390/include/asm/compat.h
index de065b32381..de065b32381 100644
--- a/include/asm-s390/compat.h
+++ b/arch/s390/include/asm/compat.h
diff --git a/include/asm-s390/cpcmd.h b/arch/s390/include/asm/cpcmd.h
index 48a9eab1642..48a9eab1642 100644
--- a/include/asm-s390/cpcmd.h
+++ b/arch/s390/include/asm/cpcmd.h
diff --git a/include/asm-s390/cpu.h b/arch/s390/include/asm/cpu.h
index e5a6a9ba3ad..e5a6a9ba3ad 100644
--- a/include/asm-s390/cpu.h
+++ b/arch/s390/include/asm/cpu.h
diff --git a/include/asm-s390/cputime.h b/arch/s390/include/asm/cputime.h
index 133ce054fc8..133ce054fc8 100644
--- a/include/asm-s390/cputime.h
+++ b/arch/s390/include/asm/cputime.h
diff --git a/include/asm-s390/current.h b/arch/s390/include/asm/current.h
index 83cf36cde2d..83cf36cde2d 100644
--- a/include/asm-s390/current.h
+++ b/arch/s390/include/asm/current.h
diff --git a/include/asm-s390/dasd.h b/arch/s390/include/asm/dasd.h
index 3f002e13d02..3f002e13d02 100644
--- a/include/asm-s390/dasd.h
+++ b/arch/s390/include/asm/dasd.h
diff --git a/include/asm-s390/debug.h b/arch/s390/include/asm/debug.h
index 9450ce6e32d..9450ce6e32d 100644
--- a/include/asm-s390/debug.h
+++ b/arch/s390/include/asm/debug.h
diff --git a/include/asm-s390/delay.h b/arch/s390/include/asm/delay.h
index 78357314c45..78357314c45 100644
--- a/include/asm-s390/delay.h
+++ b/arch/s390/include/asm/delay.h
diff --git a/include/asm-s390/device.h b/arch/s390/include/asm/device.h
index d8f9872b0e2..d8f9872b0e2 100644
--- a/include/asm-s390/device.h
+++ b/arch/s390/include/asm/device.h
diff --git a/include/asm-s390/diag.h b/arch/s390/include/asm/diag.h
index 72b2e2f2d32..72b2e2f2d32 100644
--- a/include/asm-s390/diag.h
+++ b/arch/s390/include/asm/diag.h
diff --git a/include/asm-s390/div64.h b/arch/s390/include/asm/div64.h
index 6cd978cefb2..6cd978cefb2 100644
--- a/include/asm-s390/div64.h
+++ b/arch/s390/include/asm/div64.h
diff --git a/include/asm-s390/dma.h b/arch/s390/include/asm/dma.h
index 7425c6af6cd..7425c6af6cd 100644
--- a/include/asm-s390/dma.h
+++ b/arch/s390/include/asm/dma.h
diff --git a/include/asm-s390/ebcdic.h b/arch/s390/include/asm/ebcdic.h
index 7f6f641d32f..7f6f641d32f 100644
--- a/include/asm-s390/ebcdic.h
+++ b/arch/s390/include/asm/ebcdic.h
diff --git a/include/asm-s390/elf.h b/arch/s390/include/asm/elf.h
index 3cad5692381..3cad5692381 100644
--- a/include/asm-s390/elf.h
+++ b/arch/s390/include/asm/elf.h
diff --git a/include/asm-s390/emergency-restart.h b/arch/s390/include/asm/emergency-restart.h
index 108d8c48e42..108d8c48e42 100644
--- a/include/asm-s390/emergency-restart.h
+++ b/arch/s390/include/asm/emergency-restart.h
diff --git a/include/asm-s390/errno.h b/arch/s390/include/asm/errno.h
index e41d5b37c4d..e41d5b37c4d 100644
--- a/include/asm-s390/errno.h
+++ b/arch/s390/include/asm/errno.h
diff --git a/include/asm-s390/etr.h b/arch/s390/include/asm/etr.h
index 80ef58c6197..80ef58c6197 100644
--- a/include/asm-s390/etr.h
+++ b/arch/s390/include/asm/etr.h
diff --git a/include/asm-s390/extmem.h b/arch/s390/include/asm/extmem.h
index 33837d75618..33837d75618 100644
--- a/include/asm-s390/extmem.h
+++ b/arch/s390/include/asm/extmem.h
diff --git a/include/asm-s390/fb.h b/arch/s390/include/asm/fb.h
index c7df3803099..c7df3803099 100644
--- a/include/asm-s390/fb.h
+++ b/arch/s390/include/asm/fb.h
diff --git a/include/asm-s390/fcntl.h b/arch/s390/include/asm/fcntl.h
index 46ab12db573..46ab12db573 100644
--- a/include/asm-s390/fcntl.h
+++ b/arch/s390/include/asm/fcntl.h
diff --git a/include/asm-s390/fcx.h b/arch/s390/include/asm/fcx.h
index 8be1f3a5804..8be1f3a5804 100644
--- a/include/asm-s390/fcx.h
+++ b/arch/s390/include/asm/fcx.h
diff --git a/include/asm-s390/futex.h b/arch/s390/include/asm/futex.h
index 5c5d02de49e..5c5d02de49e 100644
--- a/include/asm-s390/futex.h
+++ b/arch/s390/include/asm/futex.h
diff --git a/include/asm-s390/hardirq.h b/arch/s390/include/asm/hardirq.h
index 4b7cb964ff3..89ec7056da2 100644
--- a/include/asm-s390/hardirq.h
+++ b/arch/s390/include/asm/hardirq.h
@@ -34,4 +34,18 @@ typedef struct {
 
 void clock_comparator_work(void);
 
+static inline unsigned long long local_tick_disable(void)
+{
+	unsigned long long old;
+
+	old = S390_lowcore.clock_comparator;
+	S390_lowcore.clock_comparator = -1ULL;
+	return old;
+}
+
+static inline void local_tick_enable(unsigned long long comp)
+{
+	S390_lowcore.clock_comparator = comp;
+}
+
 #endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-s390/hugetlb.h b/arch/s390/include/asm/hugetlb.h
index 670a1d1745d..670a1d1745d 100644
--- a/include/asm-s390/hugetlb.h
+++ b/arch/s390/include/asm/hugetlb.h
diff --git a/include/asm-s390/idals.h b/arch/s390/include/asm/idals.h
index e82c10efe65..e82c10efe65 100644
--- a/include/asm-s390/idals.h
+++ b/arch/s390/include/asm/idals.h
diff --git a/include/asm-s390/io.h b/arch/s390/include/asm/io.h
index b7ff6afc3ca..b7ff6afc3ca 100644
--- a/include/asm-s390/io.h
+++ b/arch/s390/include/asm/io.h
diff --git a/include/asm-s390/ioctl.h b/arch/s390/include/asm/ioctl.h
index b279fe06dfe..b279fe06dfe 100644
--- a/include/asm-s390/ioctl.h
+++ b/arch/s390/include/asm/ioctl.h
diff --git a/include/asm-s390/ioctls.h b/arch/s390/include/asm/ioctls.h
index 40e481b1b46..40e481b1b46 100644
--- a/include/asm-s390/ioctls.h
+++ b/arch/s390/include/asm/ioctls.h
diff --git a/include/asm-s390/ipcbuf.h b/arch/s390/include/asm/ipcbuf.h
index 37f293d12c8..37f293d12c8 100644
--- a/include/asm-s390/ipcbuf.h
+++ b/arch/s390/include/asm/ipcbuf.h
diff --git a/include/asm-s390/ipl.h b/arch/s390/include/asm/ipl.h
index eaca6dff540..1171e6d144a 100644
--- a/include/asm-s390/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -159,7 +159,8 @@ enum diag308_vm_flags {
 };
 
 enum diag308_rc {
-	DIAG308_RC_OK	= 1,
+	DIAG308_RC_OK		= 0x0001,
+	DIAG308_RC_NOCONFIG	= 0x0102,
 };
 
 extern int diag308(unsigned long subcode, void *addr);
diff --git a/include/asm-s390/irq.h b/arch/s390/include/asm/irq.h
index 7da991a858f..7da991a858f 100644
--- a/include/asm-s390/irq.h
+++ b/arch/s390/include/asm/irq.h
diff --git a/include/asm-s390/irq_regs.h b/arch/s390/include/asm/irq_regs.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-s390/irq_regs.h
+++ b/arch/s390/include/asm/irq_regs.h
diff --git a/include/asm-s390/irqflags.h b/arch/s390/include/asm/irqflags.h
index 3f26131120b..3f26131120b 100644
--- a/include/asm-s390/irqflags.h
+++ b/arch/s390/include/asm/irqflags.h
diff --git a/include/asm-s390/isc.h b/arch/s390/include/asm/isc.h
index 34bb8916db4..34bb8916db4 100644
--- a/include/asm-s390/isc.h
+++ b/arch/s390/include/asm/isc.h
diff --git a/include/asm-s390/itcw.h b/arch/s390/include/asm/itcw.h
index a9bc5c36b32..a9bc5c36b32 100644
--- a/include/asm-s390/itcw.h
+++ b/arch/s390/include/asm/itcw.h
diff --git a/include/asm-s390/kdebug.h b/arch/s390/include/asm/kdebug.h
index 40db27cd6e6..40db27cd6e6 100644
--- a/include/asm-s390/kdebug.h
+++ b/arch/s390/include/asm/kdebug.h
diff --git a/include/asm-s390/kexec.h b/arch/s390/include/asm/kexec.h
index f219c6411e0..bb729b84a21 100644
--- a/include/asm-s390/kexec.h
+++ b/arch/s390/include/asm/kexec.h
@@ -31,7 +31,7 @@
 #define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
 
 /* Allocate one page for the pdp and the second for the code */
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
 
 /* The native architecture */
 #define KEXEC_ARCH KEXEC_ARCH_S390
diff --git a/include/asm-s390/kmap_types.h b/arch/s390/include/asm/kmap_types.h
index fd157464822..fd157464822 100644
--- a/include/asm-s390/kmap_types.h
+++ b/arch/s390/include/asm/kmap_types.h
diff --git a/include/asm-s390/kprobes.h b/arch/s390/include/asm/kprobes.h
index 330f68caffe..330f68caffe 100644
--- a/include/asm-s390/kprobes.h
+++ b/arch/s390/include/asm/kprobes.h
diff --git a/include/asm-s390/kvm.h b/arch/s390/include/asm/kvm.h
index d74002f9579..d74002f9579 100644
--- a/include/asm-s390/kvm.h
+++ b/arch/s390/include/asm/kvm.h
diff --git a/include/asm-s390/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 3c55e4107dc..3c55e4107dc 100644
--- a/include/asm-s390/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
diff --git a/include/asm-s390/kvm_para.h b/arch/s390/include/asm/kvm_para.h
index 2c503796b61..2c503796b61 100644
--- a/include/asm-s390/kvm_para.h
+++ b/arch/s390/include/asm/kvm_para.h
diff --git a/include/asm-s390/kvm_virtio.h b/arch/s390/include/asm/kvm_virtio.h
index 146100224de..146100224de 100644
--- a/include/asm-s390/kvm_virtio.h
+++ b/arch/s390/include/asm/kvm_virtio.h
diff --git a/include/asm-s390/linkage.h b/arch/s390/include/asm/linkage.h
index 291c2d01c44..291c2d01c44 100644
--- a/include/asm-s390/linkage.h
+++ b/arch/s390/include/asm/linkage.h
diff --git a/include/asm-s390/local.h b/arch/s390/include/asm/local.h
index c11c530f74d..c11c530f74d 100644
--- a/include/asm-s390/local.h
+++ b/arch/s390/include/asm/local.h
diff --git a/include/asm-s390/lowcore.h b/arch/s390/include/asm/lowcore.h
index 0bc51d52a89..0bc51d52a89 100644
--- a/include/asm-s390/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
diff --git a/include/asm-s390/mathemu.h b/arch/s390/include/asm/mathemu.h
index e8dd1ba8edb..e8dd1ba8edb 100644
--- a/include/asm-s390/mathemu.h
+++ b/arch/s390/include/asm/mathemu.h
diff --git a/include/asm-s390/mman.h b/arch/s390/include/asm/mman.h
index 7839767d837..7839767d837 100644
--- a/include/asm-s390/mman.h
+++ b/arch/s390/include/asm/mman.h
diff --git a/include/asm-s390/mmu.h b/arch/s390/include/asm/mmu.h
index 5dd5e7b3476..5dd5e7b3476 100644
--- a/include/asm-s390/mmu.h
+++ b/arch/s390/include/asm/mmu.h
diff --git a/include/asm-s390/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index 4c2fbf48c9c..4c2fbf48c9c 100644
--- a/include/asm-s390/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
diff --git a/include/asm-s390/module.h b/arch/s390/include/asm/module.h
index 1cc1c5af705..1cc1c5af705 100644
--- a/include/asm-s390/module.h
+++ b/arch/s390/include/asm/module.h
diff --git a/include/asm-s390/monwriter.h b/arch/s390/include/asm/monwriter.h
index f0cbf96c52e..f0cbf96c52e 100644
--- a/include/asm-s390/monwriter.h
+++ b/arch/s390/include/asm/monwriter.h
diff --git a/include/asm-s390/msgbuf.h b/arch/s390/include/asm/msgbuf.h
index 1bbdee92792..1bbdee92792 100644
--- a/include/asm-s390/msgbuf.h
+++ b/arch/s390/include/asm/msgbuf.h
diff --git a/include/asm-s390/mutex.h b/arch/s390/include/asm/mutex.h
index 458c1f7fbc1..458c1f7fbc1 100644
--- a/include/asm-s390/mutex.h
+++ b/arch/s390/include/asm/mutex.h
diff --git a/include/asm-s390/page.h b/arch/s390/include/asm/page.h
index 991ba939408..991ba939408 100644
--- a/include/asm-s390/page.h
+++ b/arch/s390/include/asm/page.h
diff --git a/include/asm-s390/param.h b/arch/s390/include/asm/param.h
index 34aaa460334..34aaa460334 100644
--- a/include/asm-s390/param.h
+++ b/arch/s390/include/asm/param.h
diff --git a/include/asm-s390/pci.h b/arch/s390/include/asm/pci.h
index 42a145c9ddd..42a145c9ddd 100644
--- a/include/asm-s390/pci.h
+++ b/arch/s390/include/asm/pci.h
diff --git a/include/asm-s390/percpu.h b/arch/s390/include/asm/percpu.h
index 408d60b4f75..408d60b4f75 100644
--- a/include/asm-s390/percpu.h
+++ b/arch/s390/include/asm/percpu.h
diff --git a/include/asm-s390/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index f5b2bf3d7c1..f5b2bf3d7c1 100644
--- a/include/asm-s390/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
diff --git a/include/asm-s390/pgtable.h b/arch/s390/include/asm/pgtable.h
index 0bdb704ae05..0bdb704ae05 100644
--- a/include/asm-s390/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
diff --git a/include/asm-s390/poll.h b/arch/s390/include/asm/poll.h
index c98509d3149..c98509d3149 100644
--- a/include/asm-s390/poll.h
+++ b/arch/s390/include/asm/poll.h
diff --git a/include/asm-s390/posix_types.h b/arch/s390/include/asm/posix_types.h
index 397d93fba3a..397d93fba3a 100644
--- a/include/asm-s390/posix_types.h
+++ b/arch/s390/include/asm/posix_types.h
diff --git a/include/asm-s390/processor.h b/arch/s390/include/asm/processor.h
index 4af80af2a88..4af80af2a88 100644
--- a/include/asm-s390/processor.h
+++ b/arch/s390/include/asm/processor.h
diff --git a/include/asm-s390/ptrace.h b/arch/s390/include/asm/ptrace.h
index af2c9ac28a0..af2c9ac28a0 100644
--- a/include/asm-s390/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
diff --git a/include/asm-s390/qdio.h b/arch/s390/include/asm/qdio.h
index 6813772171f..6813772171f 100644
--- a/include/asm-s390/qdio.h
+++ b/arch/s390/include/asm/qdio.h
diff --git a/include/asm-s390/qeth.h b/arch/s390/include/asm/qeth.h
index 930d378ef75..930d378ef75 100644
--- a/include/asm-s390/qeth.h
+++ b/arch/s390/include/asm/qeth.h
diff --git a/include/asm-s390/reset.h b/arch/s390/include/asm/reset.h
index f584f4a5258..f584f4a5258 100644
--- a/include/asm-s390/reset.h
+++ b/arch/s390/include/asm/reset.h
diff --git a/include/asm-s390/resource.h b/arch/s390/include/asm/resource.h
index 366c01de04f..366c01de04f 100644
--- a/include/asm-s390/resource.h
+++ b/arch/s390/include/asm/resource.h
diff --git a/include/asm-s390/rwsem.h b/arch/s390/include/asm/rwsem.h
index 9d2a1797180..9d2a1797180 100644
--- a/include/asm-s390/rwsem.h
+++ b/arch/s390/include/asm/rwsem.h
diff --git a/include/asm-s390/s390_ext.h b/arch/s390/include/asm/s390_ext.h
index 2afc060266a..2afc060266a 100644
--- a/include/asm-s390/s390_ext.h
+++ b/arch/s390/include/asm/s390_ext.h
diff --git a/include/asm-s390/s390_rdev.h b/arch/s390/include/asm/s390_rdev.h
index 6fa20442a48..6fa20442a48 100644
--- a/include/asm-s390/s390_rdev.h
+++ b/arch/s390/include/asm/s390_rdev.h
diff --git a/include/asm-s390/scatterlist.h b/arch/s390/include/asm/scatterlist.h
index 29ec8e28c8d..29ec8e28c8d 100644
--- a/include/asm-s390/scatterlist.h
+++ b/arch/s390/include/asm/scatterlist.h
diff --git a/include/asm-s390/schid.h b/arch/s390/include/asm/schid.h
index 7bdc0fe1569..825503cf3dc 100644
--- a/include/asm-s390/schid.h
+++ b/arch/s390/include/asm/schid.h
@@ -11,6 +11,7 @@ struct subchannel_id {
 } __attribute__ ((packed, aligned(4)));
 
 #ifdef __KERNEL__
+#include <linux/string.h>
 
 /* Helper function for sane state of pre-allocated subchannel_id. */
 static inline void
diff --git a/include/asm-s390/sclp.h b/arch/s390/include/asm/sclp.h
index fed7bee650a..fed7bee650a 100644
--- a/include/asm-s390/sclp.h
+++ b/arch/s390/include/asm/sclp.h
diff --git a/include/asm-s390/sections.h b/arch/s390/include/asm/sections.h
index fbd9116eb17..fbd9116eb17 100644
--- a/include/asm-s390/sections.h
+++ b/arch/s390/include/asm/sections.h
diff --git a/include/asm-s390/segment.h b/arch/s390/include/asm/segment.h
index 8bfce3475b1..8bfce3475b1 100644
--- a/include/asm-s390/segment.h
+++ b/arch/s390/include/asm/segment.h
diff --git a/include/asm-s390/sembuf.h b/arch/s390/include/asm/sembuf.h
index 32626b0cac4..32626b0cac4 100644
--- a/include/asm-s390/sembuf.h
+++ b/arch/s390/include/asm/sembuf.h
diff --git a/include/asm-s390/setup.h b/arch/s390/include/asm/setup.h
index 4ba14e463e8..2bd9faeb391 100644
--- a/include/asm-s390/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -65,7 +65,6 @@ extern unsigned long machine_flags;
 
 #define MACHINE_FLAG_VM		(1UL << 0)
 #define MACHINE_FLAG_IEEE	(1UL << 1)
-#define MACHINE_FLAG_P390	(1UL << 2)
 #define MACHINE_FLAG_CSP	(1UL << 3)
 #define MACHINE_FLAG_MVPG	(1UL << 4)
 #define MACHINE_FLAG_DIAG44	(1UL << 5)
diff --git a/include/asm-s390/sfp-machine.h b/arch/s390/include/asm/sfp-machine.h
index 4e16aede4b0..4e16aede4b0 100644
--- a/include/asm-s390/sfp-machine.h
+++ b/arch/s390/include/asm/sfp-machine.h
diff --git a/include/asm-s390/sfp-util.h b/arch/s390/include/asm/sfp-util.h
index 0addc6466d9..0addc6466d9 100644
--- a/include/asm-s390/sfp-util.h
+++ b/arch/s390/include/asm/sfp-util.h
diff --git a/include/asm-s390/shmbuf.h b/arch/s390/include/asm/shmbuf.h
index eed2e280ce3..eed2e280ce3 100644
--- a/include/asm-s390/shmbuf.h
+++ b/arch/s390/include/asm/shmbuf.h
diff --git a/include/asm-s390/shmparam.h b/arch/s390/include/asm/shmparam.h
index c2e0c0508e7..c2e0c0508e7 100644
--- a/include/asm-s390/shmparam.h
+++ b/arch/s390/include/asm/shmparam.h
diff --git a/include/asm-s390/sigcontext.h b/arch/s390/include/asm/sigcontext.h
index aeb6e0b1332..aeb6e0b1332 100644
--- a/include/asm-s390/sigcontext.h
+++ b/arch/s390/include/asm/sigcontext.h
diff --git a/include/asm-s390/siginfo.h b/arch/s390/include/asm/siginfo.h
index e0ff1ab054b..e0ff1ab054b 100644
--- a/include/asm-s390/siginfo.h
+++ b/arch/s390/include/asm/siginfo.h
diff --git a/include/asm-s390/signal.h b/arch/s390/include/asm/signal.h
index f6cfddb278c..f6cfddb278c 100644
--- a/include/asm-s390/signal.h
+++ b/arch/s390/include/asm/signal.h
diff --git a/include/asm-s390/sigp.h b/arch/s390/include/asm/sigp.h
index e16d56f8dfe..e16d56f8dfe 100644
--- a/include/asm-s390/sigp.h
+++ b/arch/s390/include/asm/sigp.h
diff --git a/include/asm-s390/smp.h b/arch/s390/include/asm/smp.h
index ae89cf2478f..ae89cf2478f 100644
--- a/include/asm-s390/smp.h
+++ b/arch/s390/include/asm/smp.h
diff --git a/include/asm-s390/socket.h b/arch/s390/include/asm/socket.h
index c786ab623b2..c786ab623b2 100644
--- a/include/asm-s390/socket.h
+++ b/arch/s390/include/asm/socket.h
diff --git a/include/asm-s390/sockios.h b/arch/s390/include/asm/sockios.h
index f4fc16c7da5..f4fc16c7da5 100644
--- a/include/asm-s390/sockios.h
+++ b/arch/s390/include/asm/sockios.h
diff --git a/include/asm-s390/sparsemem.h b/arch/s390/include/asm/sparsemem.h
index 545d219e6a2..545d219e6a2 100644
--- a/include/asm-s390/sparsemem.h
+++ b/arch/s390/include/asm/sparsemem.h
diff --git a/include/asm-s390/spinlock.h b/arch/s390/include/asm/spinlock.h
index df84ae96915..df84ae96915 100644
--- a/include/asm-s390/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
diff --git a/include/asm-s390/spinlock_types.h b/arch/s390/include/asm/spinlock_types.h
index 654abc40de0..654abc40de0 100644
--- a/include/asm-s390/spinlock_types.h
+++ b/arch/s390/include/asm/spinlock_types.h
diff --git a/include/asm-s390/stat.h b/arch/s390/include/asm/stat.h
index d92959eebb6..d92959eebb6 100644
--- a/include/asm-s390/stat.h
+++ b/arch/s390/include/asm/stat.h
diff --git a/include/asm-s390/statfs.h b/arch/s390/include/asm/statfs.h
index 099a4557919..099a4557919 100644
--- a/include/asm-s390/statfs.h
+++ b/arch/s390/include/asm/statfs.h
diff --git a/include/asm-s390/string.h b/arch/s390/include/asm/string.h
index d074673a6d9..d074673a6d9 100644
--- a/include/asm-s390/string.h
+++ b/arch/s390/include/asm/string.h
diff --git a/include/asm-s390/suspend.h b/arch/s390/include/asm/suspend.h
index 1f34580e67a..1f34580e67a 100644
--- a/include/asm-s390/suspend.h
+++ b/arch/s390/include/asm/suspend.h
diff --git a/include/asm-s390/sysinfo.h b/arch/s390/include/asm/sysinfo.h
index 79d01343f8b..79d01343f8b 100644
--- a/include/asm-s390/sysinfo.h
+++ b/arch/s390/include/asm/sysinfo.h
diff --git a/include/asm-s390/system.h b/arch/s390/include/asm/system.h
index 819e7d99ca0..819e7d99ca0 100644
--- a/include/asm-s390/system.h
+++ b/arch/s390/include/asm/system.h
diff --git a/include/asm-s390/tape390.h b/arch/s390/include/asm/tape390.h
index 884fba48f1f..884fba48f1f 100644
--- a/include/asm-s390/tape390.h
+++ b/arch/s390/include/asm/tape390.h
diff --git a/include/asm-s390/termbits.h b/arch/s390/include/asm/termbits.h
index 58731853d52..58731853d52 100644
--- a/include/asm-s390/termbits.h
+++ b/arch/s390/include/asm/termbits.h
diff --git a/include/asm-s390/termios.h b/arch/s390/include/asm/termios.h
index 67f66278f53..67f66278f53 100644
--- a/include/asm-s390/termios.h
+++ b/arch/s390/include/asm/termios.h
diff --git a/include/asm-s390/thread_info.h b/arch/s390/include/asm/thread_info.h
index 91a8f93ad35..91a8f93ad35 100644
--- a/include/asm-s390/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
diff --git a/include/asm-s390/timer.h b/arch/s390/include/asm/timer.h
index d98d79e35cd..d98d79e35cd 100644
--- a/include/asm-s390/timer.h
+++ b/arch/s390/include/asm/timer.h
diff --git a/include/asm-s390/timex.h b/arch/s390/include/asm/timex.h
index d744c3d62de..d744c3d62de 100644
--- a/include/asm-s390/timex.h
+++ b/arch/s390/include/asm/timex.h
diff --git a/include/asm-s390/tlb.h b/arch/s390/include/asm/tlb.h
index 3d8a96d39d9..3d8a96d39d9 100644
--- a/include/asm-s390/tlb.h
+++ b/arch/s390/include/asm/tlb.h
diff --git a/include/asm-s390/tlbflush.h b/arch/s390/include/asm/tlbflush.h
index d60394b9745..d60394b9745 100644
--- a/include/asm-s390/tlbflush.h
+++ b/arch/s390/include/asm/tlbflush.h
diff --git a/include/asm-s390/todclk.h b/arch/s390/include/asm/todclk.h
index c7f62055488..c7f62055488 100644
--- a/include/asm-s390/todclk.h
+++ b/arch/s390/include/asm/todclk.h
diff --git a/include/asm-s390/topology.h b/arch/s390/include/asm/topology.h
index d96c9164345..d96c9164345 100644
--- a/include/asm-s390/topology.h
+++ b/arch/s390/include/asm/topology.h
diff --git a/include/asm-s390/types.h b/arch/s390/include/asm/types.h
index 41c54765613..41c54765613 100644
--- a/include/asm-s390/types.h
+++ b/arch/s390/include/asm/types.h
diff --git a/include/asm-s390/uaccess.h b/arch/s390/include/asm/uaccess.h
index 0235970278f..0235970278f 100644
--- a/include/asm-s390/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
diff --git a/include/asm-s390/ucontext.h b/arch/s390/include/asm/ucontext.h
index d69bec0b03f..d69bec0b03f 100644
--- a/include/asm-s390/ucontext.h
+++ b/arch/s390/include/asm/ucontext.h
diff --git a/include/asm-s390/unaligned.h b/arch/s390/include/asm/unaligned.h
index da9627afe5d..da9627afe5d 100644
--- a/include/asm-s390/unaligned.h
+++ b/arch/s390/include/asm/unaligned.h
diff --git a/include/asm-s390/unistd.h b/arch/s390/include/asm/unistd.h
index 583da807ea9..c8ad350d144 100644
--- a/include/asm-s390/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -259,7 +259,13 @@
 #define __NR_timerfd_create	319
 #define __NR_timerfd_settime	320
 #define __NR_timerfd_gettime	321
-#define NR_syscalls 322
+#define __NR_signalfd4		322
+#define __NR_eventfd2		323
+#define __NR_inotify_init1	324
+#define __NR_pipe2		325
+#define __NR_dup3		326
+#define __NR_epoll_create1	327
+#define NR_syscalls 328
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/include/asm-s390/user.h b/arch/s390/include/asm/user.h
index 1b050e35fdc..1b050e35fdc 100644
--- a/include/asm-s390/user.h
+++ b/arch/s390/include/asm/user.h
diff --git a/include/asm-s390/vtoc.h b/arch/s390/include/asm/vtoc.h
index 3a5267d90d2..3a5267d90d2 100644
--- a/include/asm-s390/vtoc.h
+++ b/arch/s390/include/asm/vtoc.h
diff --git a/include/asm-s390/xor.h b/arch/s390/include/asm/xor.h
index c82eb12a5b1..c82eb12a5b1 100644
--- a/include/asm-s390/xor.h
+++ b/arch/s390/include/asm/xor.h
diff --git a/include/asm-s390/zcrypt.h b/arch/s390/include/asm/zcrypt.h
index 00d3bbd4411..00d3bbd4411 100644
--- a/include/asm-s390/zcrypt.h
+++ b/arch/s390/include/asm/zcrypt.h
diff --git a/arch/s390/kernel/compat_ptrace.h b/arch/s390/kernel/compat_ptrace.h
index cde81fa64f8..a2be3a978d5 100644
--- a/arch/s390/kernel/compat_ptrace.h
+++ b/arch/s390/kernel/compat_ptrace.h
@@ -42,6 +42,7 @@ struct user_regs_struct32
 	u32 gprs[NUM_GPRS];
 	u32 acrs[NUM_ACRS];
 	u32 orig_gpr2;
+	/* nb: there's a 4-byte hole here */
 	s390_fp_regs fp_regs;
 	/*
 	 * These per registers are in here so that gdb can modify them
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index d003a6e16af..328a20e880b 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1732,3 +1732,40 @@ compat_sys_timerfd_gettime_wrapper:
 	lgfr	%r2,%r2			# int
 	llgtr	%r3,%r3			# struct compat_itimerspec *
 	jg	compat_sys_timerfd_gettime
+
+	.globl compat_sys_signalfd4_wrapper
+compat_sys_signalfd4_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# compat_sigset_t *
+	llgfr	%r4,%r4			# compat_size_t
+	lgfr	%r5,%r5			# int
+	jg	compat_sys_signalfd4
+
+	.globl sys_eventfd2_wrapper
+sys_eventfd2_wrapper:
+	llgfr	%r2,%r2			# unsigned int
+	lgfr	%r3,%r3			# int
+	jg	sys_eventfd2
+
+	.globl	sys_inotify_init1_wrapper
+sys_inotify_init1_wrapper:
+	lgfr	%r2,%r2			# int
+	jg	sys_inotify_init1
+
+	.globl	sys_pipe2_wrapper
+sys_pipe2_wrapper:
+	llgtr	%r2,%r2			# u32 *
+	lgfr	%r3,%r3			# int
+	jg	sys_pipe2		# branch to system call
+
+	.globl	sys_dup3_wrapper
+sys_dup3_wrapper:
+	llgfr	%r2,%r2			# unsigned int
+	llgfr	%r3,%r3			# unsigned int
+	lgfr	%r4,%r4			# int
+	jg	sys_dup3		# branch to system call
+
+	.globl	sys_epoll_create1_wrapper
+sys_epoll_create1_wrapper:
+	lgfr	%r2,%r2			# int
+	jg	sys_epoll_create1	# branch to system call
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 54b2779b5e2..2dcf590faba 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1705,7 +1705,10 @@ void __init setup_ipl(void)
 
 void __init ipl_update_parameters(void)
 {
-	if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK)
+	int rc;
+
+	rc = diag308(DIAG308_STORE, &ipl_block);
+	if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG))
 		diag308_set_works = 1;
 }
 
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
index 18ed7abe16c..9872999c66d 100644
--- a/arch/s390/kernel/mem_detect.c
+++ b/arch/s390/kernel/mem_detect.c
@@ -9,27 +9,6 @@
 #include <asm/sclp.h>
 #include <asm/setup.h>
 
-static int memory_fast_detect(struct mem_chunk *chunk)
-{
-	unsigned long val0 = 0;
-	unsigned long val1 = 0xc;
-	int rc = -EOPNOTSUPP;
-
-	if (ipl_flags & IPL_NSS_VALID)
-		return -EOPNOTSUPP;
-	asm volatile(
-		"	diag	%1,%2,0x260\n"
-		"0:	lhi	%0,0\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (rc), "+d" (val0), "+d" (val1) : : "cc");
-
-	if (rc || val0 != val1)
-		return -EOPNOTSUPP;
-	chunk->size = val0 + 1;
-	return 0;
-}
-
 static inline int tprot(unsigned long addr)
 {
 	int rc = -EFAULT;
@@ -84,8 +63,6 @@ void detect_memory_layout(struct mem_chunk chunk[])
 	unsigned long flags, cr0;
 
 	memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk));
-	if (memory_fast_detect(&chunk[0]) == 0)
-		return;
 	/* Disable IRQs, DAT and low address protection so tprot does the
 	 * right thing and we don't get scheduled away with low address
 	 * protection disabled.
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 9839767d084..3e2c05cb6a8 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -75,7 +75,9 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return sf->gprs[8];
 }
 
-DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
+DEFINE_PER_CPU(struct s390_idle_data, s390_idle) = {
+	.lock = __SPIN_LOCK_UNLOCKED(s390_idle.lock)
+};
 
 static int s390_idle_enter(void)
 {
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 2815bfe348a..c8b08289eb8 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -170,6 +170,13 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr)
 		 */
 		tmp = (addr_t) task_pt_regs(child)->orig_gpr2;
 
+	} else if (addr < (addr_t) &dummy->regs.fp_regs) {
+		/*
+		 * prevent reads of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		tmp = 0;
+
 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
 		/* 
 		 * floating point regs. are stored in the thread structure
@@ -270,6 +277,13 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		 */
 		task_pt_regs(child)->orig_gpr2 = data;
 
+	} else if (addr < (addr_t) &dummy->regs.fp_regs) {
+		/*
+		 * prevent writes of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		return 0;
+
 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure
@@ -428,6 +442,13 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr)
 		 */
 		tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4);
 
+	} else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+		/*
+		 * prevent reads of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		tmp = 0;
+
 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure 
@@ -514,6 +535,13 @@ static int __poke_user_compat(struct task_struct *child,
 		 */
 		*(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp;
 
+	} else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+		/*
+		 * prevent writess of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		return 0;
+
 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index b795b3e24af..00b9b4dec5e 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -610,7 +610,6 @@ static void __init smp_create_idle(unsigned int cpu)
 	if (IS_ERR(p))
 		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
 	current_set[cpu] = p;
-	spin_lock_init(&(&per_cpu(s390_idle, cpu))->lock);
 }
 
 static int __cpuinit smp_alloc_lowcore(int cpu)
@@ -845,7 +844,6 @@ void __init smp_prepare_boot_cpu(void)
 	current_set[0] = current;
 	smp_cpu_state[0] = CPU_STATE_CONFIGURED;
 	smp_cpu_polarization[0] = POLARIZATION_UNKNWN;
-	spin_lock_init(&(&__get_cpu_var(s390_idle))->lock);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index c87ec687d4c..c66d35e5514 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -330,3 +330,9 @@ SYSCALL(sys_eventfd,sys_eventfd,sys_eventfd_wrapper)
 SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper)
 SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */
 SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper)
+SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper)
+SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper)
+SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper)
+SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
+SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
+SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ab70d9bd926..ca114fe46ff 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -1348,7 +1348,7 @@ early_param("stp", early_parse_stp);
 /*
  * Reset STP attachment.
  */
-static void stp_reset(void)
+static void __init stp_reset(void)
 {
 	int rc;
 
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 76c1e60c92f..607bd67a18c 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -55,7 +55,7 @@ SECTIONS
 		__start___ex_table = .;
 		*(__ex_table)
 		__stop___ex_table = .;
-	}
+	} :data
 
 	.data : {		/* Data */
 		DATA_DATA
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 2e2d2ffb6a0..d1faf5c5440 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,6 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.instruction_stfl++;
 	facility_list &= ~(1UL<<24); /* no stfle */
+	facility_list &= ~(1UL<<23); /* no large pages */
 
 	rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
 			   &facility_list, sizeof(facility_list));
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index eae21a8ac72..fc6ab6094df 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -43,7 +43,7 @@ void __udelay(unsigned long usecs)
 		local_bh_disable();
 	local_irq_save(flags);
 	if (raw_irqs_disabled_flags(flags)) {
-		old_cc = S390_lowcore.clock_comparator;
+		old_cc = local_tick_disable();
 		S390_lowcore.clock_comparator = -1ULL;
 		__ctl_store(cr0, 0, 0);
 		dummy = (cr0 & 0xffff00e0) | 0x00000800;
@@ -65,7 +65,7 @@ void __udelay(unsigned long usecs)
 
 	if (raw_irqs_disabled_flags(flags)) {
 		__ctl_load(cr0, 0, 0);
-		S390_lowcore.clock_comparator = old_cc;
+		local_tick_enable(old_cc);
 	}
 	if (!irq_context)
 		_local_bh_enable();
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 4993b0f594e..1169130a97e 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -179,7 +179,7 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	int rc;
 
 	pgdat = NODE_DATA(nid);
-	zone = pgdat->node_zones + ZONE_NORMAL;
+	zone = pgdat->node_zones + ZONE_MOVABLE;
 	rc = vmem_add_mapping(start, size);
 	if (rc)
 		return rc;
@@ -189,3 +189,14 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	return rc;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+int remove_memory(u64 start, u64 size)
+{
+	unsigned long start_pfn, end_pfn;
+
+	start_pfn = PFN_DOWN(start);
+	end_pfn = start_pfn + PFN_DOWN(size);
+	return offline_pages(start_pfn, end_pfn, 120 * HZ);
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0b88dc462d7..5131d50f851 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -24,6 +24,11 @@ config SUPERH32
 config SUPERH64
 	def_bool y if CPU_SH5
 
+config ARCH_DEFCONFIG
+	string
+	default "arch/sh/configs/shx3_defconfig" if SUPERH32
+	default "arch/sh/configs/cayman_defconfig" if SUPERH64
+
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
@@ -43,6 +48,9 @@ config GENERIC_HWEIGHT
 config GENERIC_HARDIRQS
 	def_bool y
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	def_bool y
+
 config GENERIC_IRQ_PROBE
 	def_bool y
 
@@ -58,6 +66,10 @@ config GENERIC_TIME
 config GENERIC_CLOCKEVENTS
 	def_bool n
 
+config GENERIC_LOCKBREAK
+	def_bool y
+	depends on SMP && PREEMPT
+
 config SYS_SUPPORTS_PM
 	bool
 
@@ -89,9 +101,6 @@ config ARCH_HAS_ILOG2_U64
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 config IO_TRAPPED
 	bool
 
@@ -348,253 +357,10 @@ config CPU_SUBTYPE_SH5_103
 endchoice
 
 source "arch/sh/mm/Kconfig"
+ 
 source "arch/sh/Kconfig.cpu"
 
-menu "Board support"
-
-config SOLUTION_ENGINE
-	bool
-
-config SH_SOLUTION_ENGINE
-	bool "SolutionEngine"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
-	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
-	  CPU_SUBTYPE_SH7750R 
-	help
-	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
-	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
-	bool "SolutionEngine7206"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7206
-	help
-	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
-	  evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
-	bool "SolutionEngine7619"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7619
-	help
-	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
-	  evaluation board.
-	
-config SH_7721_SOLUTION_ENGINE
-	bool "SolutionEngine7721"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7721
-	help
-	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
-	  evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
-	bool "SolutionEngine7722"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
-	  evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
-	bool "SolutionEngine7751"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7751
-	help
-	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
-	  evaluation board.
-	  
-config SH_7780_SOLUTION_ENGINE
-	bool "SolutionEngine7780"
-	select SOLUTION_ENGINE
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7780
-	help
-	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
-	  evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
-	bool "SolutionEngine7343"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7343
-	help
-	  Select 7343 SolutionEngine if configuring for a Hitachi
-	  SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
-	bool "SystemH7751R"
-	depends on CPU_SUBTYPE_SH7751R
-	help
-	  Select SystemH if you are configuring for a Renesas SystemH
-	  7751R evaluation board.
-
-config SH_HP6XX
-	bool "HP6XX"
-	select SYS_SUPPORTS_APM_EMULATION
-	select HD6446X_SERIES
-	depends on CPU_SUBTYPE_SH7709
-	help
-	  Select HP6XX if configuring for a HP jornada HP6xx.
-	  More information (hardware only) at
-	  <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
-	bool "Dreamcast"
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7091
-	help
-	  Select Dreamcast if configuring for a SEGA Dreamcast.
-	  More information at <http://www.linux-sh.org>
-
-config SH_SH03
-	bool "Interface CTP/PCI-SH03"
-	depends on CPU_SUBTYPE_SH7751
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  CTP/PCI-SH03 is a CPU module computer that is produced
-	  by Interface Corporation.
-	  More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
-	bool "SecureEdge5410"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SecureEdge5410 if configuring for a SnapGear SH board.
-	  This includes both the OEM SecureEdge products as well as the
-	  SME product line.
-
-config SH_RTS7751R2D
-	bool "RTS7751R2D"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-	help
-	  Select RTS7751R2D if configuring for a Renesas Technology
-	  Sales SH-Graphics board.
-
-config SH_RSK7203
-	bool "RSK7203"
-	depends on CPU_SUBTYPE_SH7203
-
-config SH_SDK7780
-	bool "SDK7780R3"
-	depends on CPU_SUBTYPE_SH7780
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
-	  evaluation board.
-
-config SH_HIGHLANDER
-	bool "Highlander"
-	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-
-config SH_SH7785LCR
-	bool "SH7785LCR"
-	depends on CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-
-config SH_SH7785LCR_29BIT_PHYSMAPS
-	bool "SH7785LCR 29bit physmaps"
-	depends on SH_SH7785LCR
-	default y
-	help
-	  This board has 2 physical memory maps. It can be changed with
-	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
-	  you can access all on-board device in 29bit address mode.
-
-config SH_MIGOR
-	bool "Migo-R"
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select Migo-R if configuring for the SH7722 Migo-R platform
-          by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_AP325RXA
-	bool "AP-325RXA"
-	depends on CPU_SUBTYPE_SH7723
-	help
-	  Renesas "AP-325RXA" support.
-	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
-
-config SH_SH7763RDP
-	bool "SH7763RDP"
-	depends on CPU_SUBTYPE_SH7763
-	help
-	  Select SH7763RDP if configuring for a Renesas SH7763
-	  evaluation board.
-
-config SH_EDOSK7705
-	bool "EDOSK7705"
-	depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
-	bool "SH4-202 MicroDev"
-	depends on CPU_SUBTYPE_SH4_202
-	help
-	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
-	  with an SH4-202 CPU.
-
-config SH_LANDISK
-	bool "LANDISK"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
-	bool "TITAN"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select Titan if you are configuring for a Nimble Microsystems
-	  NetEngine NP51R.
-
-config SH_SHMIN
-	bool "SHMIN"
-	depends on CPU_SUBTYPE_SH7706
-	select CPU_HAS_IPR_IRQ
-	help
-	  Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
-	bool "L-BOX RE2"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
-	bool "SH-X3 Prototype board"
-	depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
-	bool "Magic Panel R2"
-	depends on CPU_SUBTYPE_SH7720
-	help
-	  Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
-	bool "Hitachi Cayman"
-	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
-	select SYS_SUPPORTS_PCI
-
-endmenu
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/boards/renesas/sdk7780/Kconfig"
-source "arch/sh/boards/renesas/migor/Kconfig"
-source "arch/sh/boards/magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 
@@ -721,6 +487,23 @@ config CRASH_DUMP
 
 	  For more details see Documentation/kdump/kdump.txt
 
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via prctl, it cannot be disabled and the task is only
+	  allowed to execute a few safe syscalls defined by each seccomp
+	  mode.
+
+	  If unsure, say N.
+
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on SYS_SUPPORTS_SMP
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 36f4b1f7066..4d2d102e00d 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -182,7 +182,7 @@ if SUPERH64
 
 config SH64_PROC_ASIDS
 	bool "Debug: report ASIDs through /proc/asids"
-	depends on PROC_FS
+	depends on PROC_FS && MMU
 
 config SH64_SR_WATCH
 	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index c627e45c4df..01d85c74481 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -68,7 +68,7 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 defaultimage-$(CONFIG_SUPERH32)	:= zImage
 
 # Set some sensible Kbuild defaults
-KBUILD_DEFCONFIG	:= r7780mp_defconfig
+KBUILD_DEFCONFIG	:= shx3_defconfig
 KBUILD_IMAGE		:= $(defaultimage-y)
 
 #
@@ -91,51 +91,32 @@ LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4'
 LDFLAGS			+= -EB
 endif
 
-KBUILD_CFLAGS		+= -pipe $(cflags-y)
-KBUILD_AFLAGS		+= $(cflags-y)
-
 head-y			:= arch/sh/kernel/init_task.o
 head-$(CONFIG_SUPERH32)	+= arch/sh/kernel/head_32.o
 head-$(CONFIG_SUPERH64)	+= arch/sh/kernel/head_64.o
 
-LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
-core-y				+= arch/sh/kernel/ arch/sh/mm/
+core-y				+= arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
 core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 
-# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE)		+= se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
-machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= se/7721
-machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
-machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
-machdir-$(CONFIG_SH_SH03)			+= sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)		+= snapgear
-machdir-$(CONFIG_SH_RTS7751R2D)			+= renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)		+= renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705)			+= renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
-machdir-$(CONFIG_SH_MIGOR)			+= renesas/migor
-machdir-$(CONFIG_SH_SDK7780)			+= renesas/sdk7780
-machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto
-machdir-$(CONFIG_SH_RSK7203)			+= renesas/rsk7203
-machdir-$(CONFIG_SH_AP325RXA)			+= renesas/ap325rxa
-machdir-$(CONFIG_SH_SH7763RDP)			+= renesas/sh7763rdp
-machdir-$(CONFIG_SH_SH7785LCR)			+= renesas/sh7785lcr
-machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
-machdir-$(CONFIG_SH_LANDISK)			+= landisk
-machdir-$(CONFIG_SH_TITAN)			+= titan
-machdir-$(CONFIG_SH_SHMIN)			+= shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= se/7619
-machdir-$(CONFIG_SH_LBOX_RE2)			+= lboxre2
-machdir-$(CONFIG_SH_MAGIC_PANEL_R2)		+= magicpanelr2
-machdir-$(CONFIG_SH_CAYMAN)			+= cayman
-
-incdir-y	:= $(notdir $(machdir-y))
+# Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE)		+= mach-se
+machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
+machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
+machdir-$(CONFIG_SH_SH03)			+= mach-sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410)		+= mach-snapgear
+machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
+machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
+machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
+machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
+machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
+machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
+machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= mach-microdev
+machdir-$(CONFIG_SH_LANDISK)			+= mach-landisk
+machdir-$(CONFIG_SH_TITAN)			+= mach-titan
+machdir-$(CONFIG_SH_LBOX_RE2)			+= mach-lboxre2
+machdir-$(CONFIG_SH_CAYMAN)			+= mach-cayman
 
 ifneq ($(machdir-y),)
 core-y	+= $(addprefix arch/sh/boards/, \
@@ -145,67 +126,40 @@ endif
 # Companion chips
 core-$(CONFIG_HD6446X_SERIES)	+= arch/sh/cchips/hd6446x/
 
-cpuincdir-$(CONFIG_CPU_SH2)	:= cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH2A)	:= cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH3)	:= cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4)	:= cpu-sh4
-cpuincdir-$(CONFIG_CPU_SH5)	:= cpu-sh5
-
-libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
-libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
-libs-y				+= $(LIBGCC)
+#
+# CPU header paths
+#
+# These are ordered by optimization level. A CPU family that is a subset
+# of another (ie, SH-2A / SH-2), is picked up first, with increasing
+# levels of genericness if nothing more suitable is situated in the
+# hierarchy.
+#
+# As an example, in order of preference, SH-2A > SH-2 > common definitions.
+#
+cpuincdir-$(CONFIG_CPU_SH2A)	+= cpu-sh2a
+cpuincdir-$(CONFIG_CPU_SH2)	+= cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH3)	+= cpu-sh3
+cpuincdir-$(CONFIG_CPU_SH4)	+= cpu-sh4
+cpuincdir-$(CONFIG_CPU_SH5)	+= cpu-sh5
+cpuincdir-y			+= cpu-common	# Must be last
 
 drivers-y			+= arch/sh/drivers/
 drivers-$(CONFIG_OPROFILE)	+= arch/sh/oprofile/
 
 boot := arch/sh/boot
 
-ifneq ($(KBUILD_SRC),)
-incdir-prefix	:= $(srctree)/include/asm-sh/
-else
-incdir-prefix	:=
-endif
+cflags-y	+= $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \
+		   $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
 
-#	Update machine arch and proc symlinks if something which affects
-#	them changed.  We use .arch and .mach to indicate when they were
-#	updated last, otherwise make uses the target directory mtime.
+KBUILD_CFLAGS		+= -pipe $(cflags-y)
+KBUILD_CPPFLAGS		+= $(cflags-y)
+KBUILD_AFLAGS		+= $(cflags-y)
 
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
-		     include/config/auto.conf FORCE
-	@echo '  SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
-	@touch $@
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-#	Most boards have their own mach directories.  For the ones that
-#	don't, just reference the parent directory so the semantics are
-#	kept roughly the same.
-#
-#	When multiple boards are compiled in at the same time, preference
-#	for the mach link is given to whichever has a directory for its
-#	headers. However, this is only a workaround until platforms that
-#	can live in the same kernel image back away from relying on the
-#	mach link.
-
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
-		      include/config/auto.conf FORCE
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)rm -f include/asm-sh/mach
-	$(Q)for i in $(incdir-y); do \
-	if [ -d $(srctree)/include/asm-sh/$$i ]; then \
-		echo -n '  SYMLINK include/asm-sh/mach -> '; \
-		echo -e "include/asm-sh/$$i"; \
-		ln -fsn $(incdir-prefix)$$i \
-			include/asm-sh/mach; \
-	else \
-		if [ ! -d include/asm-sh/mach ]; then \
-			echo -n '  SYMLINK include/asm-sh/mach -> '; \
-			echo -e 'include/asm-sh'; \
-			ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \
-		fi; \
-	fi; \
-	done
-	@touch $@
+libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
+libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
+libs-y				+= $(LIBGCC)
 
 PHONY += maketools FORCE
 
@@ -219,8 +173,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux
 
 compressed: zImage
 
-archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \
-	     arch/sh/lib64/syscalltab.h
+archprepare: maketools arch/sh/lib64/syscalltab.h
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
@@ -262,6 +215,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S
 	$(call filechk,gen-syscalltab)
 
 CLEAN_FILES += arch/sh/lib64/syscalltab.h \
-	       include/asm-sh/machtypes.h \
-	       include/asm-sh/cpu include/asm-sh/.cpu \
-	       include/asm-sh/mach include/asm-sh/.mach
+	       include/asm-sh/machtypes.h
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
new file mode 100644
index 00000000000..ae194869fd6
--- /dev/null
+++ b/arch/sh/boards/Kconfig
@@ -0,0 +1,258 @@
+menu "Board support"
+
+config SOLUTION_ENGINE
+	bool
+
+config SH_SOLUTION_ENGINE
+	bool "SolutionEngine"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+	  CPU_SUBTYPE_SH7750R 
+	help
+	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+	bool "SolutionEngine7206"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7206
+	help
+	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+	  evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+	bool "SolutionEngine7619"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7619
+	help
+	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+	  evaluation board.
+	
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+	bool "SolutionEngine7722"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
+	  evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+	bool "SolutionEngine7751"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7751
+	help
+	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+	  evaluation board.
+	  
+config SH_7780_SOLUTION_ENGINE
+	bool "SolutionEngine7780"
+	select SOLUTION_ENGINE
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
+	  evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+	bool "SolutionEngine7343"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7343
+	help
+	  Select 7343 SolutionEngine if configuring for a Hitachi
+	  SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+	bool "SystemH7751R"
+	depends on CPU_SUBTYPE_SH7751R
+	help
+	  Select SystemH if you are configuring for a Renesas SystemH
+	  7751R evaluation board.
+
+config SH_HP6XX
+	bool "HP6XX"
+	select SYS_SUPPORTS_APM_EMULATION
+	select HD6446X_SERIES
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select HP6XX if configuring for a HP jornada HP6xx.
+	  More information (hardware only) at
+	  <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+	bool "Dreamcast"
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7091
+	help
+	  Select Dreamcast if configuring for a SEGA Dreamcast.
+	  More information at <http://www.linux-sh.org>
+
+config SH_SH03
+	bool "Interface CTP/PCI-SH03"
+	depends on CPU_SUBTYPE_SH7751
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  CTP/PCI-SH03 is a CPU module computer that is produced
+	  by Interface Corporation.
+	  More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+	bool "SecureEdge5410"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SecureEdge5410 if configuring for a SnapGear SH board.
+	  This includes both the OEM SecureEdge products as well as the
+	  SME product line.
+
+config SH_RTS7751R2D
+	bool "RTS7751R2D"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+	help
+	  Select RTS7751R2D if configuring for a Renesas Technology
+	  Sales SH-Graphics board.
+
+config SH_RSK7203
+	bool "RSK7203"
+	depends on CPU_SUBTYPE_SH7203
+
+config SH_SDK7780
+	bool "SDK7780R3"
+	depends on CPU_SUBTYPE_SH7780
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+	  evaluation board.
+
+config SH_HIGHLANDER
+	bool "Highlander"
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
+config SH_MIGOR
+	bool "Migo-R"
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+	bool "AP-325RXA"
+	depends on CPU_SUBTYPE_SH7723
+	help
+	  Renesas "AP-325RXA" support.
+	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+	bool "SH7763RDP"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select SH7763RDP if configuring for a Renesas SH7763
+	  evaluation board.
+
+config SH_EDOSK7705
+	bool "EDOSK7705"
+	depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+	bool "SH4-202 MicroDev"
+	depends on CPU_SUBTYPE_SH4_202
+	help
+	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+	  with an SH4-202 CPU.
+
+config SH_LANDISK
+	bool "LANDISK"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+	bool "TITAN"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select Titan if you are configuring for a Nimble Microsystems
+	  NetEngine NP51R.
+
+config SH_SHMIN
+	bool "SHMIN"
+	depends on CPU_SUBTYPE_SH7706
+	select CPU_HAS_IPR_IRQ
+	help
+	  Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+	bool "L-BOX RE2"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+	bool "SH-X3 Prototype board"
+	depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+	bool "Magic Panel R2"
+	depends on CPU_SUBTYPE_SH7720
+	help
+	  Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+	bool "Hitachi Cayman"
+	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+	select SYS_SUPPORTS_PCI
+
+endmenu
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+	int SH_MAGIC_PANEL_R2_VERSION
+	default "3"
+	help
+	  Set the version of the Magic Panel R2
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
new file mode 100644
index 00000000000..463022c7df3
--- /dev/null
+++ b/arch/sh/boards/Makefile
@@ -0,0 +1,8 @@
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
+obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_RSK7203)	+= board-rsk7203.o
+obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
+obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/board-ap325rxa.c
index 7fa74462bd9..fd1612590bf 100644
--- a/arch/sh/boards/renesas/ap325rxa/setup.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -17,7 +17,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
-#include <linux/delay.h>
 #include <linux/smc911x.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
@@ -141,6 +140,10 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.vsync_len = 1,
 			.sync = 0, /* hsync and vsync are active low */
 		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
 		.board_cfg = {
 			.display_on = ap320_wvga_power_on,
 		},
@@ -165,6 +168,7 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+#ifdef CONFIG_I2C
 static unsigned char camera_ncm03j_magic[] =
 {
 	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
@@ -234,6 +238,7 @@ static struct platform_device camera_device = {
 		.platform_data	= &camera_info,
 	},
 };
+#endif /* CONFIG_I2C */
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
@@ -270,7 +275,9 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
 	&ap325rxa_nor_flash_device,
 	&lcdc_device,
 	&ceu_device,
+#ifdef CONFIG_I2C
 	&camera_device,
+#endif
 };
 
 static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/board-magicpanelr2.c
index f3b8b07ea5d..f3b8b07ea5d 100644
--- a/arch/sh/boards/magicpanelr2/setup.c
+++ b/arch/sh/boards/board-magicpanelr2.c
diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/board-rsk7203.c
index 0bbda04b03b..ffbedc59a97 100644
--- a/arch/sh/boards/renesas/rsk7203/setup.c
+++ b/arch/sh/boards/board-rsk7203.c
@@ -10,13 +10,20 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
+#include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/map.h>
+#include <linux/smc911x.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 
+static struct smc911x_platdata smc911x_info = {
+	.flags		= SMC911X_USE_16BIT,
+	.irq_flags	= IRQF_TRIGGER_LOW,
+};
+
 static struct resource smc911x_resources[] = {
 	[0] = {
 		.start		= 0x24000000,
@@ -35,6 +42,9 @@ static struct platform_device smc911x_device = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(smc911x_resources),
 	.resource	= smc911x_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
 };
 
 static const char *probes[] = { "cmdlinepart", NULL };
diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/board-sh7785lcr.c
index b95d674ee70..b95d674ee70 100644
--- a/arch/sh/boards/renesas/sh7785lcr/setup.c
+++ b/arch/sh/boards/board-sh7785lcr.c
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/board-shmin.c
index 16e5dae8ecf..16e5dae8ecf 100644
--- a/arch/sh/boards/shmin/setup.c
+++ b/arch/sh/boards/board-shmin.c
diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
index 489a8f86736..489a8f86736 100644
--- a/arch/sh/boards/cayman/Makefile
+++ b/arch/sh/boards/mach-cayman/Makefile
diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index 30ec7bebfaf..ceb37ae92c7 100644
--- a/arch/sh/boards/cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -13,7 +13,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/signal.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/page.h>
 
 /* Setup for the SMSC FDC37C935 / LAN91C100FD */
diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/mach-cayman/led.c
index a808eac4ecd..a808eac4ecd 100644
--- a/arch/sh/boards/cayman/led.c
+++ b/arch/sh/boards/mach-cayman/led.c
diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
index 8c9fa472d8f..e7f9cc5f2ff 100644
--- a/arch/sh/boards/cayman/setup.c
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 
 /*
  * Platform Dependent Interrupt Priorities.
diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile
index 7b97546c7e5..7b97546c7e5 100644
--- a/arch/sh/boards/dreamcast/Makefile
+++ b/arch/sh/boards/mach-dreamcast/Makefile
diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index 9d0673a9092..67bdc33dd41 100644
--- a/arch/sh/boards/dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -12,7 +12,7 @@
 #include <linux/irq.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/dreamcast/sysasic.h>
+#include <mach/sysasic.h>
 
 /* Dreamcast System ASIC Hardware Events -
 
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
index a7433685798..a7433685798 100644
--- a/arch/sh/boards/dreamcast/rtc.c
+++ b/arch/sh/boards/mach-dreamcast/rtc.c
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index 2581c8cd5df..7d944fc75e9 100644
--- a/arch/sh/boards/dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -26,7 +26,7 @@
 #include <asm/irq.h>
 #include <asm/rtc.h>
 #include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
+#include <mach/sysasic.h>
 
 extern struct hw_interrupt_type systemasic_int;
 extern void aica_time_init(void);
diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index 14bdd531f11..14bdd531f11 100644
--- a/arch/sh/boards/renesas/edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 541cea2a652..541cea2a652 100644
--- a/arch/sh/boards/renesas/edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index f076c45308d..f076c45308d 100644
--- a/arch/sh/boards/renesas/edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index fc8f28e04ba..fc8f28e04ba 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/mach-highlander/Makefile
index 20a10080b11..20a10080b11 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/mach-highlander/Makefile
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index ae1cfcb2970..ae1cfcb2970 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index 9d3921fe27c..9d3921fe27c 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 896c045aa39..896c045aa39 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/mach-highlander/psw.c
index c844dfa5d58..be8d5477fc6 100644
--- a/arch/sh/boards/renesas/r7780rp/psw.c
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/mach/r7780rp.h>
+#include <asm/r7780rp.h>
 #include <asm/push-switch.h>
 
 static irqreturn_t psw_irq_handler(int irq, void *arg)
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/mach-highlander/setup.c
index bc79afb6fc4..bc79afb6fc4 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile
index b3124278247..b3124278247 100644
--- a/arch/sh/boards/hp6xx/Makefile
+++ b/arch/sh/boards/mach-hp6xx/Makefile
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index 177f4f028e0..177f4f028e0 100644
--- a/arch/sh/boards/hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index d22f6eac9cc..e96684def78 100644
--- a/arch/sh/boards/hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -13,7 +13,7 @@
 #include <asm/io.h>
 #include <asm/hd64461.h>
 #include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 #include <asm/pm.h>
 
 #define STBCR		0xffffff82
diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
index 45e9bf0b911..44b648cf6f2 100644
--- a/arch/sh/boards/hp6xx/pm_wakeup.S
+++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
@@ -8,7 +8,7 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 
 #define k0	r0
 #define k1	r1
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index 2f414ac3c69..475b46caec1 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -16,7 +16,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 
 #define	SCPCR	0xa4000116
 #define	SCPDR	0xa4000136
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile
index a696b4277fa..a696b4277fa 100644
--- a/arch/sh/boards/landisk/Makefile
+++ b/arch/sh/boards/mach-landisk/Makefile
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 0c15b0a50b9..25cdf735800 100644
--- a/arch/sh/boards/landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -20,8 +20,8 @@
 #include <linux/fs.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/landisk/gio.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/gio.h>
+#include <mach-landisk/mach/iodata_landisk.h>
 
 #define DEVCOUNT                4
 #define GIO_MINOR	        2	/* GIO minor no. */
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
index 258649491d4..7b284cde1f5 100644
--- a/arch/sh/boards/landisk/irq.c
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
 
 static void disable_landisk_irq(unsigned int irq)
 {
diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
index 5a9b70b5dec..e6b0efa098d 100644
--- a/arch/sh/boards/landisk/psw.c
+++ b/arch/sh/boards/mach-landisk/psw.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
 #include <asm/push-switch.h>
 
 static irqreturn_t psw_irq_handler(int irq, void *arg)
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
index 2b708ec7255..db22ea2e6d4 100644
--- a/arch/sh/boards/landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -18,7 +18,7 @@
 #include <linux/pm.h>
 #include <linux/mm.h>
 #include <asm/machvec.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
 #include <asm/io.h>
 
 void init_landisk_IRQ(void);
diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile
index e9ed140c06f..e9ed140c06f 100644
--- a/arch/sh/boards/lboxre2/Makefile
+++ b/arch/sh/boards/mach-lboxre2/Makefile
diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
index 5a1c3bbe7b5..5a1c3bbe7b5 100644
--- a/arch/sh/boards/lboxre2/irq.c
+++ b/arch/sh/boards/mach-lboxre2/irq.c
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
index c74440d38ee..c74440d38ee 100644
--- a/arch/sh/boards/lboxre2/setup.c
+++ b/arch/sh/boards/mach-lboxre2/setup.c
diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
index 1387dd6c85e..1387dd6c85e 100644
--- a/arch/sh/boards/superh/microdev/Makefile
+++ b/arch/sh/boards/mach-microdev/Makefile
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 9f8a540f7e1..9f8a540f7e1 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index 4d335077a3f..4d335077a3f 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/mach-microdev/led.c
index 36e54b47a75..36e54b47a75 100644
--- a/arch/sh/boards/superh/microdev/led.c
+++ b/arch/sh/boards/mach-microdev/led.c
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index fc8cd06d66c..fc8cd06d66c 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
index a7b3b728ec3..a7b3b728ec3 100644
--- a/arch/sh/boards/renesas/migor/Kconfig
+++ b/arch/sh/boards/mach-migor/Kconfig
diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/mach-migor/Makefile
index 5f231dd25c0..5f231dd25c0 100644
--- a/arch/sh/boards/renesas/migor/Makefile
+++ b/arch/sh/boards/mach-migor/Makefile
diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
index 6e960959644..6e960959644 100644
--- a/arch/sh/boards/renesas/migor/lcd_qvga.c
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 7bd365ad2d0..714dce91cc9 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -224,6 +224,10 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 			.vsync_len = 2,
 			.sync = 0,
 		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
 	}
 #endif
 #ifdef CONFIG_SH_MIGOR_QVGA
@@ -245,6 +249,10 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 			.vsync_len = 2,
 			.sync = FB_SYNC_HOR_HIGH_ACT,
 		},
+		.lcd_size_cfg = { /* 2.4 inch */
+			.width = 49,
+			.height = 37,
+		},
 		.board_cfg = {
 			.setup_sys = migor_lcd_qvga_setup,
 		},
@@ -304,6 +312,7 @@ static void camera_power_off(void)
 	ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
 }
 
+#ifdef CONFIG_I2C
 static unsigned char camera_ov772x_magic[] =
 {
 	0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
@@ -391,6 +400,7 @@ static struct platform_device migor_camera_device = {
 		.platform_data	= &ov772x_info,
 	},
 };
+#endif /* CONFIG_I2C */
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
@@ -429,7 +439,9 @@ static struct platform_device *migor_devices[] __initdata = {
 	&sh_keysc_device,
 	&migor_lcdc_device,
 	&migor_ceu_device,
+#ifdef CONFIG_I2C
 	&migor_camera_device,
+#endif
 	&migor_nor_flash_device,
 	&migor_nand_flash_device,
 };
diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig
index 8122a9667fc..8122a9667fc 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Kconfig
+++ b/arch/sh/boards/mach-r2d/Kconfig
diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile
index 0d4c75a72be..0d4c75a72be 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Makefile
+++ b/arch/sh/boards/mach-r2d/Makefile
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 8e49f6e5124..8e49f6e5124 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index 2308e8753bc..2308e8753bc 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
index 065f1df09bf..065f1df09bf 100644
--- a/arch/sh/boards/renesas/sdk7780/Kconfig
+++ b/arch/sh/boards/mach-sdk7780/Kconfig
diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
index 3d8f0befc35..3d8f0befc35 100644
--- a/arch/sh/boards/renesas/sdk7780/Makefile
+++ b/arch/sh/boards/mach-sdk7780/Makefile
diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 87cdc578f6f..87cdc578f6f 100644
--- a/arch/sh/boards/renesas/sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index acc5932587f..acc5932587f 100644
--- a/arch/sh/boards/renesas/sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
index 63e7ed699f3..63e7ed699f3 100644
--- a/arch/sh/boards/se/7206/Makefile
+++ b/arch/sh/boards/mach-se/7206/Makefile
diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 1308e618e04..9c3a33210d6 100644
--- a/arch/sh/boards/se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
 
 
 static inline void delay(void)
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index 9d5bfc77d0d..aef7f052851 100644
--- a/arch/sh/boards/se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -10,7 +10,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
 
 #define INTSTS0 0x31800000
 #define INTSTS1 0x31800002
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
index 4fe84cc0840..f5466384972 100644
--- a/arch/sh/boards/se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
 #include <asm/io.h>
 #include <asm/machvec.h>
 #include <asm/heartbeat.h>
diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
index 3024796c620..3024796c620 100644
--- a/arch/sh/boards/se/7343/Makefile
+++ b/arch/sh/boards/mach-se/7343/Makefile
diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c
index 3a6d1142493..8741abc1da7 100644
--- a/arch/sh/boards/se/7343/io.c
+++ b/arch/sh/boards/mach-se/7343/io.c
@@ -6,7 +6,7 @@
  */
 #include <linux/kernel.h>
 #include <asm/io.h>
-#include <asm/mach/se7343.h>
+#include <mach-se/mach/se7343.h>
 
 #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
 
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index 1112e86aa93..051c29d4eae 100644
--- a/arch/sh/boards/se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -13,9 +13,8 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7343.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7343.h>
 
 static void disable_se7343_irq(unsigned int irq)
 {
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index 8ae718d6c71..486f40bf927 100644
--- a/arch/sh/boards/se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -2,7 +2,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <asm/machvec.h>
-#include <asm/mach/se7343.h>
+#include <mach-se/mach/se7343.h>
 #include <asm/heartbeat.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
index 8e624b06d5e..8e624b06d5e 100644
--- a/arch/sh/boards/se/770x/Makefile
+++ b/arch/sh/boards/mach-se/770x/Makefile
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
index b1ec085b867..28833c8786e 100644
--- a/arch/sh/boards/se/770x/io.c
+++ b/arch/sh/boards/mach-se/770x/io.c
@@ -6,7 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 
 /* MS7750 requires special versions of in*, out* routines, since
    PC-like io ports are located at upper half byte of 16-bit word which
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
index cdb0807928a..ec1fea571b5 100644
--- a/arch/sh/boards/se/770x/irq.c
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -13,7 +13,7 @@
 #include <linux/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 
 static struct ipr_data ipr_irq_table[] = {
 	/*
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
index cf4a5ba12df..9123d9687bf 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -9,7 +9,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #include <asm/io.h>
 #include <asm/smc37c93x.h>
 #include <asm/heartbeat.h>
@@ -113,6 +113,8 @@ static struct platform_device heartbeat_device = {
 	.resource	= heartbeat_resources,
 };
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
 /* SH771X Ethernet driver */
 static struct resource sh_eth0_resources[] = {
 	[0] = {
@@ -159,12 +161,16 @@ static struct platform_device sh_eth1_device = {
 	.num_resources = ARRAY_SIZE(sh_eth1_resources),
 	.resource = sh_eth1_resources,
 };
+#endif
 
 static struct platform_device *se_devices[] __initdata = {
 	&heartbeat_device,
 	&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
 	&sh_eth0_device,
 	&sh_eth1_device,
+#endif
 };
 
 static int __init se_devices_setup(void)
diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
index 7f09030980b..7f09030980b 100644
--- a/arch/sh/boards/se/7721/Makefile
+++ b/arch/sh/boards/mach-se/7721/Makefile
diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
index c4fdd622bf8..b417acc4dad 100644
--- a/arch/sh/boards/se/7721/irq.c
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 
 enum {
 	UNUSED = 0,
diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
index 1be3e92752f..d3fc80ff4d8 100644
--- a/arch/sh/boards/se/7721/setup.c
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 
diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
index 8694373389e..8694373389e 100644
--- a/arch/sh/boards/se/7722/Makefile
+++ b/arch/sh/boards/mach-se/7722/Makefile
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index 0b03f3f610b..02d21a3e2a8 100644
--- a/arch/sh/boards/se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 
 static void disable_se7722_irq(unsigned int irq)
 {
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index 6e228ea5978..fe6f96517e1 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -17,7 +17,7 @@
 #include <linux/smc91x.h>
 #include <asm/machvec.h>
 #include <asm/clock.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_keysc.h>
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index dbc29f3a9de..dbc29f3a9de 100644
--- a/arch/sh/boards/se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
index e8d846cec89..6287ae57031 100644
--- a/arch/sh/boards/se/7751/io.c
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -12,7 +12,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <asm/io.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
 #include <asm/addrspace.h>
 
 static inline volatile u16 *port2adr(unsigned int port)
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
index c3d12590e5d..5c9847ea1e7 100644
--- a/arch/sh/boards/se/7751/irq.c
+++ b/arch/sh/boards/mach-se/7751/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/irq.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
 
 static struct ipr_data ipr_irq_table[] = {
 	{ 13, 3, 3, 2 },
diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
index 203b2923fe7..203b2923fe7 100644
--- a/arch/sh/boards/se/7751/pci.c
+++ b/arch/sh/boards/mach-se/7751/pci.c
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
index deefbfd9259..50572512e3e 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -11,7 +11,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 
diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
index 6b88adae3ec..6b88adae3ec 100644
--- a/arch/sh/boards/se/7780/Makefile
+++ b/arch/sh/boards/mach-se/7780/Makefile
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
index 6bd70da6bb4..66ad292c9fc 100644
--- a/arch/sh/boards/se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 
 /*
  * Initialize IRQ setting
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
index 0f08ab3b2be..1d3a867e94e 100644
--- a/arch/sh/boards/se/7780/setup.c
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
new file mode 100644
index 00000000000..2de42bae4b4
--- /dev/null
+++ b/arch/sh/boards/mach-se/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE)	+= 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/mach-se/board-se7619.c
index 1d0ef7faa10..1d0ef7faa10 100644
--- a/arch/sh/boards/se/7619/setup.c
+++ b/arch/sh/boards/mach-se/board-se7619.c
diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile
index 400306a796e..400306a796e 100644
--- a/arch/sh/boards/sh03/Makefile
+++ b/arch/sh/boards/mach-sh03/Makefile
diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index 0a9266bb51c..0a9266bb51c 100644
--- a/arch/sh/boards/sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
index 934ac4f1c48..5771219be3f 100644
--- a/arch/sh/boards/sh03/setup.c
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -11,8 +11,8 @@
 #include <linux/platform_device.h>
 #include <asm/io.h>
 #include <asm/rtc.h>
-#include <asm/sh03/io.h>
-#include <asm/sh03/sh03.h>
+#include <mach-sh03/mach/io.h>
+#include <mach-sh03/mach/sh03.h>
 #include <asm/addrspace.h>
 
 static void __init init_sh03_IRQ(void)
diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile
index f6c0b55516d..f6c0b55516d 100644
--- a/arch/sh/boards/renesas/sh7763rdp/Makefile
+++ b/arch/sh/boards/mach-sh7763rdp/Makefile
diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
index fd850bad2de..fd850bad2de 100644
--- a/arch/sh/boards/renesas/sh7763rdp/irq.c
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 925f16af712..23850da05e3 100644
--- a/arch/sh/boards/renesas/sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -15,8 +15,11 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/mtd/physmap.h>
-#include <asm/io.h>
+#include <linux/fb.h>
+#include <linux/io.h>
 #include <asm/sh7763rdp.h>
+#include <asm/sh_eth.h>
+#include <asm/sh7760fb.h>
 
 /* NOR Flash */
 static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
@@ -60,8 +63,85 @@ static struct platform_device sh7763rdp_nor_flash_device = {
 	},
 };
 
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 58,   /* irq number */
+		.end    = 58,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh7763rdp_eth_device = {
+	.name       = "sh-eth",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
+/* SH7763 LCDC */
+static struct resource sh7763rdp_fb_resources[] = {
+	{
+		.start  = 0xFFE80000,
+		.end    = 0xFFE80442 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct fb_videomode sh7763fb_videomode = {
+	.refresh = 60,
+	.name = "VGA Monitor",
+	.xres = 640,
+	.yres = 480,
+	.pixclock = 10000,
+	.left_margin = 80,
+	.right_margin = 24,
+	.upper_margin = 30,
+	.lower_margin = 1,
+	.hsync_len = 96,
+	.vsync_len = 1,
+	.sync = 0,
+	.vmode = FB_VMODE_NONINTERLACED,
+	.flag = FBINFO_FLAG_DEFAULT,
+};
+
+static struct sh7760fb_platdata sh7763fb_def_pdata = {
+	.def_mode = &sh7763fb_videomode,
+	.ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
+	.lddfr = LDDFR_16BPP_RGB565,
+	.ldpmmr = 0x0000,
+	.ldpspr = 0xFFFF,
+	.ldaclnr = 0x0001,
+	.ldickr = 0x1102,
+	.rotate = 0,
+	.novsync = 0,
+	.blank = NULL,
+};
+
+static struct platform_device sh7763rdp_fb_device = {
+	.name		= "sh7760-lcdc",
+	.resource	= sh7763rdp_fb_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
+	.dev = {
+		.platform_data = &sh7763fb_def_pdata,
+	},
+};
+
 static struct platform_device *sh7763rdp_devices[] __initdata = {
 	&sh7763rdp_nor_flash_device,
+	&sh7763rdp_eth_device,
+	&sh7763rdp_fb_device,
 };
 
 static int __init sh7763rdp_devices_setup(void)
@@ -69,7 +149,7 @@ static int __init sh7763rdp_devices_setup(void)
 	return platform_add_devices(sh7763rdp_devices,
 				    ARRAY_SIZE(sh7763rdp_devices));
 }
-__initcall(sh7763rdp_devices_setup);
+device_initcall(sh7763rdp_devices_setup);
 
 static void __init sh7763rdp_setup(char **cmdline_p)
 {
diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
index d2d2f4b6a50..d2d2f4b6a50 100644
--- a/arch/sh/boards/snapgear/Makefile
+++ b/arch/sh/boards/mach-snapgear/Makefile
diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
index 0f482426455..0f482426455 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/mach-snapgear/io.c
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
index 7022483f98e..a5e349d3dda 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -22,7 +22,7 @@
 #include <asm/snapgear.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/cpu/timer.h>
+#include <cpu/timer.h>
 
 /*
  * EraseConfig handling functions
diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
index 2cc6a23d9d3..2cc6a23d9d3 100644
--- a/arch/sh/boards/renesas/systemh/Makefile
+++ b/arch/sh/boards/mach-systemh/Makefile
diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index 1b767e1a142..1b767e1a142 100644
--- a/arch/sh/boards/renesas/systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
index 0ba2fe674c4..601c9c8cdbe 100644
--- a/arch/sh/boards/renesas/systemh/irq.c
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -11,9 +11,8 @@
 
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 
-#include <linux/hdreg.h>
-#include <linux/ide.h>
 #include <asm/io.h>
 #include <asm/systemh7751.h>
 #include <asm/smc37c93x.h>
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
index ee78af84277..ee78af84277 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/mach-systemh/setup.c
diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/mach-titan/Makefile
index 08d75370006..08d75370006 100644
--- a/arch/sh/boards/titan/Makefile
+++ b/arch/sh/boards/mach-titan/Makefile
diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4730c1dd697..4730c1dd697 100644
--- a/arch/sh/boards/titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/mach-titan/setup.c
index 5de3b2ad71a..5de3b2ad71a 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/mach-titan/setup.c
diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
index 983e4551fec..983e4551fec 100644
--- a/arch/sh/boards/renesas/x3proto/Makefile
+++ b/arch/sh/boards/mach-x3proto/Makefile
diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
index b5c673c3933..b5c673c3933 100644
--- a/arch/sh/boards/renesas/x3proto/ilsel.c
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index abc5b6d418f..a70d23b2178 100644
--- a/arch/sh/boards/renesas/x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -3,7 +3,7 @@
  *
  * Renesas SH-X3 Prototype Board Support.
  *
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2008 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/smc91x.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
@@ -30,6 +31,10 @@ static struct platform_device heartbeat_device = {
 	.resource	= heartbeat_resources,
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start		= 0x18000300,
@@ -47,6 +52,9 @@ static struct platform_device smc91x_device = {
 	.id		= -1,
 	.resource	= smc91x_resources,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.dev	= {
+		.platform_data = &smc91x_info,
+	},
 };
 
 static struct resource r8a66597_usb_host_resources[] = {
diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig
deleted file mode 100644
index b0abddc3e84..00000000000
--- a/arch/sh/boards/magicpanelr2/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
-	int SH_MAGIC_PANEL_R2_VERSION
-	default "3"
-	help
-	  Set the version of the Magic Panel R2
-
-endmenu
-
-endif
diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile
deleted file mode 100644
index 7a6d586b907..00000000000
--- a/arch/sh/boards/magicpanelr2/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Magic Panel specific parts
-#
-
-obj-y	 := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/renesas/ap325rxa/Makefile
deleted file mode 100644
index f663768429f..00000000000
--- a/arch/sh/boards/renesas/ap325rxa/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	:= setup.o
diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/renesas/rsk7203/Makefile
deleted file mode 100644
index f663768429f..00000000000
--- a/arch/sh/boards/renesas/rsk7203/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	:= setup.o
diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile
deleted file mode 100644
index 77037567633..00000000000
--- a/arch/sh/boards/renesas/sh7785lcr/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	 := setup.o
diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile
deleted file mode 100644
index d21775c28cd..00000000000
--- a/arch/sh/boards/se/7619/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the 7619 SolutionEngine specific parts of the kernel
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile
deleted file mode 100644
index 3190cc72430..00000000000
--- a/arch/sh/boards/shmin/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SHMIN board.
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 8b37869a822..5b54965eef9 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -18,9 +18,10 @@ CONFIG_PAGE_OFFSET	?= 0x80000000
 CONFIG_MEMORY_START	?= 0x0c000000
 CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
+CONFIG_ENTRY_OFFSET	?= 0x00001000
 
 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
 
 targets := zImage vmlinux.srec uImage uImage.srec
 subdir- := compressed
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
index f72c1989f5f..622eac3cf55 100644
--- a/arch/sh/boot/compressed/head_64.S
+++ b/arch/sh/boot/compressed/head_64.S
@@ -14,8 +14,8 @@
  *   Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
  */
 #include <asm/cache.h>
-#include <asm/cpu/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/mmu_context.h>
+#include <cpu/registers.h>
 
 /*
  * Fixed TLB entries to identity map the beginning of RAM
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 5471df53753..851c870adf3 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,15 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed Jun  4 17:30:00 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:21:17 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -19,7 +21,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -57,7 +58,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -79,10 +79,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -99,6 +105,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -175,6 +182,7 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -253,9 +261,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -281,10 +290,6 @@ CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -376,6 +381,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -466,6 +473,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -512,10 +520,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -587,6 +595,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -620,6 +629,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -631,8 +641,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -667,10 +679,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -679,7 +687,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems
@@ -752,6 +764,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -762,17 +775,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -842,6 +854,8 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -898,6 +912,10 @@ CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -937,6 +955,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 57728788b75..3dc1cbd8a98 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,14 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc7
-# Fri Sep 21 15:46:27 2007
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 16:49:13 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -37,12 +40,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -55,21 +61,39 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -80,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -93,13 +118,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -108,6 +137,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -116,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -133,6 +166,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -142,12 +176,15 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -155,6 +192,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -194,6 +233,7 @@ CONFIG_SH_PCLK_FREQ=49876504
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -204,7 +244,10 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -239,12 +282,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -263,10 +310,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -275,10 +319,6 @@ CONFIG_PCI_AUTO=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,6 +331,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -309,6 +350,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -316,8 +358,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -334,10 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -345,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -366,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -374,6 +412,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
+CONFIG_GDROM=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -384,11 +423,15 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -400,44 +443,49 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -449,6 +497,7 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -464,12 +513,12 @@ CONFIG_8139TOO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -491,7 +540,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -505,6 +553,8 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_MAPLE=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -530,10 +580,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -553,6 +606,19 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -568,45 +634,40 @@ CONFIG_SH_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# Sonics Silicon Backplane
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
@@ -615,11 +676,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -653,7 +715,15 @@ CONFIG_FB_PVR2=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -680,49 +750,30 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -735,14 +786,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -771,7 +819,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -786,14 +833,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -807,35 +854,25 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -845,14 +882,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 756d38dc2f7..41e25b3a5b0 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Sep 11 19:42:44 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:24:57 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +22,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -34,12 +37,15 @@ CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_USER_NS is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -52,6 +58,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -64,6 +71,19 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -73,6 +93,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -86,13 +107,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -101,6 +126,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -109,14 +135,17 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +155,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0d000000
 CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -135,7 +165,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -143,6 +175,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -181,6 +215,7 @@ CONFIG_SH_PCLK_FREQ=22110000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -219,11 +254,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -237,10 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_ISA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -263,11 +297,12 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 
 #
@@ -282,9 +317,12 @@ CONFIG_APM_EMULATION=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
@@ -294,8 +332,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -332,6 +373,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
@@ -342,14 +384,17 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 # CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_QDI is not set
@@ -370,11 +415,9 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -387,6 +430,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -395,12 +439,15 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP600=y
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -417,9 +464,11 @@ CONFIG_SERIO=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -439,7 +488,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -454,39 +502,45 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_HP680=y
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
@@ -495,11 +549,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -511,7 +566,20 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_HIT=y
+CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_HP680=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -533,15 +601,13 @@ CONFIG_FONT_PEARL_8x8=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -564,9 +630,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -575,23 +642,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -606,13 +657,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -643,7 +691,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -658,8 +705,11 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -668,10 +718,6 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -714,22 +760,21 @@ CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -739,50 +784,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 38f934ab50c..99cc39c5c6c 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,44 +1,53 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Thu Dec  7 17:13:04 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:35:07 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -50,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,67 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-CONFIG_SH_LANDISK=y
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -160,53 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -214,19 +203,32 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -241,12 +243,11 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
 
 #
 # Additional SuperH Device Drivers
 #
+CONFIG_HEARTBEAT=y
 # CONFIG_PUSH_SWITCH is not set
 
 #
@@ -254,13 +255,17 @@ CONFIG_HEARTBEAT=y
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -273,16 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -301,29 +302,16 @@ CONFIG_YENTA_ENE_TUNE=y
 CONFIG_YENTA_TOSHIBA=y
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -331,13 +319,14 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -364,49 +353,36 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_QUEUE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -421,10 +397,6 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -432,9 +404,20 @@ CONFIG_ATALK=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -443,35 +426,17 @@ CONFIG_ATALK=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -484,63 +449,66 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 CONFIG_BLK_DEV_OFFBOARD=y
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-CONFIG_IDEDMA_ONLYDISK=y
 CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -550,18 +518,15 @@ CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -583,6 +548,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -590,77 +556,43 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -671,76 +603,49 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -748,18 +653,20 @@ CONFIG_NET_PCI=y
 # CONFIG_NE2K_PCI is not set
 CONFIG_8139CP=y
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -767,58 +674,53 @@ CONFIG_8139CP=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# PCMCIA network device support
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -826,6 +728,7 @@ CONFIG_8139CP=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -835,7 +738,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -845,6 +747,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -858,10 +761,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -880,22 +786,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -903,65 +797,77 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
 
 #
-# Video Capture Adapters
+# Multimedia core support
 #
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_PMS is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-
-#
-# V4L USB devices
-#
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
 CONFIG_VIDEO_USBVIDEO=m
 CONFIG_USB_VICAM=m
 CONFIG_USB_IBMCAM=m
@@ -975,106 +881,100 @@ CONFIG_USB_STV680=m
 # CONFIG_USB_ZC0301 is not set
 CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_GEMTEK_PCI is not set
 # CONFIG_RADIO_MAXIRADIO is not set
 # CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
 CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-CONFIG_USB_DABUSB=m
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Open Sound System
+# USB Input Devices
 #
-CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1094,66 +994,28 @@ CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
@@ -1168,6 +1030,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -1175,8 +1038,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1197,6 +1063,7 @@ CONFIG_USB_EMI26=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1208,61 +1075,18 @@ CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1276,7 +1100,6 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
@@ -1285,14 +1108,11 @@ CONFIG_REISERFS_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1328,7 +1148,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1343,26 +1162,24 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1376,17 +1193,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1427,46 +1239,128 @@ CONFIG_NLS_CODEPAGE_932=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index b68b6cdbb78..aecdfd33c69 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Sat Mar 24 22:04:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:39:41 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -11,37 +13,40 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -54,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,66 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-CONFIG_SH_LBOX_RE2=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -163,55 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -219,12 +203,21 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+CONFIG_SH_LBOX_RE2=y
 
 #
 # Timer and clock configuration
@@ -232,6 +225,10 @@ CONFIG_CPU_HAS_PTEA=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=40000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -246,7 +243,6 @@ CONFIG_SH_PCLK_FREQ=40000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -262,11 +258,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -280,15 +279,12 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 CONFIG_PCMCIA_DEBUG=y
 CONFIG_PCMCIA=y
@@ -306,29 +302,16 @@ CONFIG_YENTA_O2=y
 # CONFIG_YENTA_TOSHIBA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -336,7 +319,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +326,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -370,29 +353,26 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
@@ -401,20 +381,8 @@ CONFIG_NETFILTER=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -427,10 +395,6 @@ CONFIG_NETFILTER=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -438,9 +402,20 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -449,36 +424,17 @@ CONFIG_NETFILTER=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -490,19 +446,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -510,6 +465,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -531,6 +487,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -538,71 +495,49 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -612,7 +547,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -622,6 +556,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
@@ -635,18 +570,18 @@ CONFIG_ATA=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_QDI is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
@@ -656,88 +591,52 @@ CONFIG_ATA=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -749,19 +648,20 @@ CONFIG_8139TOO_PIO=y
 CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -769,36 +669,33 @@ CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -808,29 +705,16 @@ CONFIG_PCMCIA_PCNET=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -838,6 +722,7 @@ CONFIG_PCMCIA_PCNET=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -847,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -857,6 +741,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -870,10 +755,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -892,22 +780,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -915,125 +791,104 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1047,37 +902,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_SH is not set
 # CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
 
 #
-# DMA Devices
+# SPI RTC drivers
 #
 
 #
-# Auxiliary Display support
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Virtualization
+# on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1091,20 +938,16 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1136,7 +979,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1151,14 +993,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -1166,17 +1008,12 @@ CONFIG_RAMFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1217,30 +1054,24 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -1251,20 +1082,100 @@ CONFIG_SH_STANDARD_BIOS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index f8398a5f10e..a3a80f3d27c 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Fri Aug 17 12:15:16 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:41:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -35,12 +38,16 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,6 +63,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -67,10 +76,24 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -81,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -94,13 +118,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -109,6 +137,7 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 CONFIG_CPU_SUBTYPE_SH7720=y
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -117,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7720=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -134,6 +166,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0C000000
 CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -143,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -151,6 +186,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -173,7 +210,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SH_DSP=y
 CONFIG_SH_ADC=y
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_DSP=y
 
@@ -196,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=24000000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -228,11 +265,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -245,10 +285,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 # Bus options
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -289,6 +325,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -296,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -314,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -325,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -346,9 +378,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -362,6 +397,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -374,6 +410,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,7 +445,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0000000
 CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_SOLUTIONENGINE is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -440,11 +476,14 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -457,18 +496,24 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -477,10 +522,10 @@ CONFIG_SMC911X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -502,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -516,6 +560,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -539,9 +584,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -569,60 +616,72 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -644,9 +703,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -655,23 +715,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -684,18 +728,14 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -724,7 +764,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -744,30 +783,29 @@ CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -781,10 +819,6 @@ CONFIG_SUNRPC_BIND34=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
@@ -825,23 +859,16 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -852,6 +879,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -866,11 +894,16 @@ CONFIG_DEBUG_KOBJECT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -879,6 +912,7 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 CONFIG_SH_KGDB=y
 
 #
@@ -904,14 +938,17 @@ CONFIG_KGDB_DEFBITS_8=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e89d951c3c1..e4b900e72dc 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,28 +1,35 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:27:01 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:47:16 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
@@ -31,10 +38,16 @@ CONFIG_SWAP=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -47,29 +60,42 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -83,59 +109,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-CONFIG_SH_SH4202_MICRODEV=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -144,67 +137,94 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 CONFIG_CPU_SUBTYPE_SH4_202=y
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_SH4202_MICRODEV=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -214,6 +234,7 @@ CONFIG_SH_PCLK_FREQ=66000000
 #
 # DMA support
 #
+CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
 CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 # CONFIG_NR_DMA_CHANNELS_BOOL is not set
@@ -221,22 +242,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -251,30 +280,16 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
 # Bus options
 #
 CONFIG_SUPERHYWAY=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -282,12 +297,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -308,30 +324,19 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -344,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -355,9 +356,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -366,159 +378,96 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=1
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -536,6 +485,7 @@ CONFIG_SMC91X=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -554,143 +504,93 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -702,20 +602,18 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -747,7 +645,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -762,21 +659,20 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -789,17 +685,12 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -840,76 +731,127 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 287408b2ace..4f8b1974f2c 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,15 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Thu May 22 14:30:07 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:18:17 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -20,7 +22,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -77,10 +78,16 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -90,12 +97,13 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -173,7 +181,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -216,6 +226,8 @@ CONFIG_CPU_HAS_DSP=y
 #
 # CONFIG_SH_7722_SOLUTION_ENGINE is not set
 CONFIG_SH_MIGOR=y
+CONFIG_SH_MIGOR_QVGA=y
+# CONFIG_SH_MIGOR_RTA_WVGA is not set
 
 #
 # Timer and clock configuration
@@ -259,6 +271,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -283,10 +296,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -362,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -378,6 +388,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -475,6 +487,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -521,10 +534,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -537,6 +550,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -602,6 +616,7 @@ CONFIG_KEYBOARD_SH_KEYSC=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -632,25 +647,40 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -663,6 +693,7 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -674,8 +705,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -710,10 +743,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -726,6 +755,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -738,7 +769,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
@@ -757,6 +788,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_G_SERIAL=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -790,6 +822,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -810,7 +843,11 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-# CONFIG_UIO is not set
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems
@@ -870,6 +907,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -899,6 +937,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -955,6 +994,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -994,6 +1037,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 1a072615ffd..57a30079758 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc4
-# Thu Mar  6 15:39:59 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:51:13 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -84,13 +85,20 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -101,6 +109,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -115,7 +124,6 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -126,6 +134,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -143,6 +152,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -173,7 +183,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -188,6 +200,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -268,7 +281,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_RCU_TRACE=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -348,14 +361,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -384,6 +396,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -400,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -420,12 +435,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -499,9 +516,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -511,7 +532,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -556,17 +576,21 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -585,6 +609,7 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -593,7 +618,6 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -616,32 +640,28 @@ CONFIG_8139TOO_8129=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -654,6 +674,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -661,6 +682,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -701,6 +723,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -722,6 +745,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -750,12 +774,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -776,6 +795,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -787,13 +807,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -809,24 +840,9 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -836,6 +852,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -844,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -879,10 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -903,7 +919,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -957,6 +972,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -967,20 +983,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1043,6 +1056,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,9 +1064,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,6 +1083,8 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
@@ -1091,51 +1110,84 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1144,8 +1196,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 0dc1ce7b934..1d09d24d429 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 23 14:03:57 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 00:59:19 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,6 +22,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -39,18 +42,16 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -64,20 +65,37 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -88,6 +106,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -101,6 +120,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -109,7 +129,10 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -118,6 +141,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -126,12 +150,15 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 CONFIG_CPU_SUBTYPE_SH7785=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -157,7 +184,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 CONFIG_HUGETLB_PAGE_SIZE_1MB=y
@@ -173,6 +202,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -202,6 +232,7 @@ CONFIG_CPU_HAS_FPU=y
 # Board support
 #
 CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_SH7785LCR is not set
 # CONFIG_SH_R7780RP is not set
 # CONFIG_SH_R7780MP is not set
 CONFIG_SH_R7785RP=y
@@ -245,12 +276,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -295,6 +327,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -329,14 +362,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -355,6 +387,7 @@ CONFIG_LLC=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -364,6 +397,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -380,6 +414,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -397,14 +433,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -464,6 +504,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -476,9 +517,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -488,7 +533,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -517,6 +561,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -532,24 +577,27 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -576,20 +624,21 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -601,6 +650,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -608,13 +659,13 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -649,6 +700,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -670,7 +722,9 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -697,12 +751,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -722,6 +771,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -733,13 +784,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -751,15 +813,15 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -792,6 +854,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -800,24 +864,9 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -827,17 +876,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -861,9 +910,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -872,10 +922,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -896,14 +943,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -951,8 +995,11 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -960,20 +1007,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1028,10 +1072,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1040,6 +1080,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,6 +1091,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_SPINLOCK=y
@@ -1066,12 +1108,14 @@ CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1091,54 +1135,96 @@ CONFIG_4KSTACKS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index a0ebd439cbd..840fe3843ff 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 13:02:42 2008
+# Linux kernel version: 2.6.26
+# Mon Jul 28 22:23:03 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -33,21 +33,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -72,26 +73,36 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
+# CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
+CONFIG_SLOB=y
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -196,6 +209,7 @@ CONFIG_CPU_HAS_FPU=y
 #
 # Board support
 #
+CONFIG_SH_RSK7203=y
 
 #
 # Timer and clock configuration
@@ -274,6 +288,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -424,8 +439,8 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -456,9 +471,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -475,7 +492,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -487,15 +503,15 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-CONFIG_SMC91X=y
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -503,6 +519,15 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -587,6 +612,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -605,6 +631,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia drivers
 #
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -618,26 +645,96 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -677,6 +774,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -734,6 +832,7 @@ CONFIG_SYSFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -743,12 +842,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -775,16 +873,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -797,12 +899,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -830,6 +934,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 3a915fd436d..8413236c1b3 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:25:55 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:55:52 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 0a6d3b9e648..7d9fa6e9ded 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:17:47 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:59:18 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index bb9bcd6591a..6d834f24290 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 22 11:34:03 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:00:12 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -38,24 +40,23 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -63,11 +64,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +78,24 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -90,6 +106,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,6 +120,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -113,6 +131,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -130,6 +149,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -137,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -159,7 +180,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -174,6 +197,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -205,7 +229,6 @@ CONFIG_CPU_HAS_FPU=y
 # CONFIG_SH_7780_SOLUTION_ENGINE is not set
 CONFIG_SH_SDK7780=y
 # CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_SDK7780_STANDALONE is not set
 CONFIG_SH_SDK7780_BASE=y
 
 #
@@ -250,12 +273,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -321,6 +345,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -370,8 +395,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 # CONFIG_INET6_XFRM_MODE_BEET is not set
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -397,7 +424,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -405,7 +431,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
 
 #
 # Classification
@@ -417,9 +442,9 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_SCH_FIFO=y
 
 #
@@ -427,6 +452,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -452,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -475,16 +503,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -492,6 +522,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -501,14 +532,12 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_PLATFORM=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -518,10 +547,8 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -537,10 +564,7 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -613,9 +638,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -625,7 +654,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -654,6 +682,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -670,6 +699,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 # CONFIG_BLK_DEV_MD is not set
 CONFIG_BLK_DEV_DM=y
@@ -686,11 +716,14 @@ CONFIG_BLK_DEV_DM=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -708,6 +741,7 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -726,6 +760,7 @@ CONFIG_SMC91X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -743,7 +778,6 @@ CONFIG_SMC91X=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
@@ -780,6 +814,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -812,10 +847,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -847,22 +885,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -870,8 +906,10 @@ CONFIG_POWER_SUPPLY=y
 #
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 # CONFIG_SSB_PCMCIAHOST is not set
 # CONFIG_SSB_SILENT is not set
@@ -882,13 +920,24 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -900,15 +949,15 @@ CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -941,6 +990,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -970,24 +1021,9 @@ CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_SUPERH_MONO=y
 CONFIG_LOGO_SUPERH_VGA16=y
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1006,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1014,15 +1051,18 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1033,6 +1073,7 @@ CONFIG_USB_EHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1054,6 +1095,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1067,10 +1109,6 @@ CONFIG_USB_MON=y
 # USB port drivers
 #
 # CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1096,16 +1134,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1117,13 +1149,11 @@ CONFIG_LEDS_CLASS=y
 # LED Triggers
 #
 # CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1145,14 +1175,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1203,8 +1230,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1212,19 +1242,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1279,7 +1306,6 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1288,6 +1314,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
@@ -1295,10 +1322,14 @@ CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1313,12 +1344,14 @@ CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1338,52 +1371,94 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 6b34baa26ea..af15cbef12b 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 20:27:08 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:06:07 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -87,9 +88,14 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -99,12 +105,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -175,7 +182,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -294,6 +303,7 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -487,6 +497,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,7 +514,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -516,6 +526,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -583,6 +594,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -594,6 +606,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -625,10 +638,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -669,6 +678,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -728,6 +738,7 @@ CONFIG_CONFIGFS_FS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -738,13 +749,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +786,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -795,6 +807,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_VM=y
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -860,6 +873,10 @@ CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -899,6 +916,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 7b727363844..4e30b70377e 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Mon Jul  7 13:12:45 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:08:38 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -77,9 +78,14 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
@@ -90,12 +96,13 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -171,6 +178,7 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -368,6 +376,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -455,6 +465,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -497,10 +508,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -513,13 +524,13 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -572,6 +583,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -617,6 +629,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -646,6 +659,7 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_DAB is not set
 
@@ -657,9 +671,9 @@ CONFIG_RADIO_ADAPTERS=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -676,6 +690,7 @@ CONFIG_FIRMWARE_EDID=y
 # Frame buffer hardware drivers
 #
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -690,15 +705,7 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -714,40 +721,14 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# SUPERH devices
-#
-
-#
-# System on Chip audio support
-#
+CONFIG_SND_SUPERH=y
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -759,6 +740,7 @@ CONFIG_HID=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -836,6 +818,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -854,7 +837,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -885,6 +867,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -941,6 +924,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -980,6 +967,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 3a3c3c1f507..80c1c72edb5 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Fri Jun 15 19:43:06 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:12:32 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -17,27 +19,26 @@ CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -49,6 +50,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
@@ -60,20 +62,26 @@ CONFIG_EVENTFD=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -87,14 +95,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -102,6 +113,8 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -110,14 +123,17 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +142,7 @@ CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -134,7 +151,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -142,6 +161,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -151,7 +172,9 @@ CONFIG_NR_QUICK=2
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
+# CONFIG_CACHE_WRITEBACK is not set
+CONFIG_CACHE_WRITETHROUGH=y
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -159,8 +182,6 @@ CONFIG_SH_WRITETHROUGH=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
-CONFIG_CPU_HAS_IPR_IRQ=y
 
 #
 # Board support
@@ -185,7 +206,6 @@ CONFIG_SH_CLK_MD=5
 #
 # DMA support
 #
-# CONFIG_SH_DMA is not set
 
 #
 # Companion Chips
@@ -205,11 +225,13 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
@@ -221,15 +243,13 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
+# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
@@ -250,10 +270,6 @@ CONFIG_BINFMT_ZFLAT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
@@ -263,6 +279,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -275,6 +292,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -334,29 +352,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -364,21 +370,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -386,13 +381,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -416,6 +411,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -433,123 +429,84 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_DAB=y
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -561,12 +518,9 @@ CONFIG_HID=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -592,7 +546,6 @@ CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
@@ -607,8 +560,11 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -617,28 +573,23 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 
@@ -646,20 +597,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # Security options
 #
 # CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index 83f3fe5db3e..baf830c4a7e 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,15 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Fri Jun  6 12:20:17 2008
+# Linux kernel version: 2.6.27-rc2
+# Fri Aug  8 13:44:20 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -19,7 +21,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -83,10 +84,16 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -96,12 +103,13 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -177,6 +185,7 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -258,6 +267,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -282,10 +292,6 @@ CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -377,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -471,6 +480,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -515,10 +525,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -546,7 +556,9 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -613,7 +625,11 @@ CONFIG_INPUT=y
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -644,6 +660,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -655,6 +672,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -679,7 +697,34 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+CONFIG_FB_SH7760=y
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -688,8 +733,22 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
-#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -788,11 +847,27 @@ CONFIG_USB_MON=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -865,6 +940,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -874,12 +950,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -949,6 +1024,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1003,6 +1079,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1042,6 +1122,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 0caf11bb7e2..af7bb589c2c 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -14,8 +14,8 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <asm/cacheflush.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 
 struct g2_channel {
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 838fad566ea..391cbe1c295 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -13,8 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 71ff3d6f26e..b2ffe649c7c 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <asm/dreamcast/dma.h>
+#include <mach-dreamcast/mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include "dma-sh.h"
diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h
index 0f591fbc922..b05af34fc15 100644
--- a/arch/sh/drivers/dma/dma-sh.h
+++ b/arch/sh/drivers/dma/dma-sh.h
@@ -11,7 +11,7 @@
 #ifndef __DMA_SH_H
 #define __DMA_SH_H
 
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
 
 /* Definitions for the SuperH DMAC */
 #define REQ_L	0x00000000
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index c44699301ee..2bf85cf091e 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static void __init gapspci_fixup_resources(struct pci_dev *dev)
 {
diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c
index 980275ffa30..5ccf9ea3a9d 100644
--- a/arch/sh/drivers/pci/ops-cayman.c
+++ b/arch/sh/drivers/pci/ops-cayman.c
@@ -2,7 +2,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/types.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include "pci-sh5.h"
 
 static inline u8 bridge_swizzle(u8 pin, u8 slot)
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index f54c291db37..f5d2a2aa6f3 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static struct resource gapspci_io_resource = {
 	.name	= "GAPSPCI IO",
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
index bbdb48c124a..3145c62484d 100644
--- a/arch/sh/drivers/pci/ops-se7780.c
+++ b/arch/sh/drivers/pci/ops-se7780.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 #include <asm/io.h>
 #include "pci-sh4.h"
 
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index a00a4df8c02..7a97438762c 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/irq.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 #include "pci-sh5.h"
diff --git a/include/asm-sh/.gitignore b/arch/sh/include/asm/.gitignore
index 9218ef82b69..378db779fb6 100644
--- a/include/asm-sh/.gitignore
+++ b/arch/sh/include/asm/.gitignore
@@ -1,3 +1 @@
-cpu
-mach
 machtypes.h
diff --git a/include/asm-sh/Kbuild b/arch/sh/include/asm/Kbuild
index 43910cdf78a..43910cdf78a 100644
--- a/include/asm-sh/Kbuild
+++ b/arch/sh/include/asm/Kbuild
diff --git a/include/asm-sh/adc.h b/arch/sh/include/asm/adc.h
index 5f85cf74d59..48824c1fab8 100644
--- a/include/asm-sh/adc.h
+++ b/arch/sh/include/asm/adc.h
@@ -5,7 +5,7 @@
  * Copyright (C) 2004  Andriy Skulysh
  */
 
-#include <asm/cpu/adc.h>
+#include <cpu/adc.h>
 
 int adc_single(unsigned int channel);
 
diff --git a/include/asm-sh/addrspace.h b/arch/sh/include/asm/addrspace.h
index fa544fc38c2..2702d81bfc0 100644
--- a/include/asm-sh/addrspace.h
+++ b/arch/sh/include/asm/addrspace.h
@@ -12,7 +12,7 @@
 
 #ifdef __KERNEL__
 
-#include <asm/cpu/addrspace.h>
+#include <cpu/addrspace.h>
 
 /* If this CPU supports segmentation, hook up the helpers */
 #ifdef P1SEG
diff --git a/include/asm-sh/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
index 4c5b7dbfced..4c5b7dbfced 100644
--- a/include/asm-sh/atomic-grb.h
+++ b/arch/sh/include/asm/atomic-grb.h
diff --git a/include/asm-sh/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
index 74f7943cff6..74f7943cff6 100644
--- a/include/asm-sh/atomic-irq.h
+++ b/arch/sh/include/asm/atomic-irq.h
diff --git a/include/asm-sh/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
index 4b00b78e3f4..4b00b78e3f4 100644
--- a/include/asm-sh/atomic-llsc.h
+++ b/arch/sh/include/asm/atomic-llsc.h
diff --git a/include/asm-sh/atomic.h b/arch/sh/include/asm/atomic.h
index c043ef00302..c043ef00302 100644
--- a/include/asm-sh/atomic.h
+++ b/arch/sh/include/asm/atomic.h
diff --git a/include/asm-sh/auxvec.h b/arch/sh/include/asm/auxvec.h
index a6b9d4f4859..483effd65e0 100644
--- a/include/asm-sh/auxvec.h
+++ b/arch/sh/include/asm/auxvec.h
@@ -12,7 +12,7 @@
  */
 #define AT_FPUCW		18	/* Used FPU control word.  */
 
-#ifdef CONFIG_VSYSCALL
+#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
 /*
  * Only define this in the vsyscall case, the entry point to
  * the vsyscall page gets placed here. The kernel will attempt
diff --git a/include/asm-sh/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h
index a5907b94395..a5907b94395 100644
--- a/include/asm-sh/bitops-grb.h
+++ b/arch/sh/include/asm/bitops-grb.h
diff --git a/include/asm-sh/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h
index 653a1275058..653a1275058 100644
--- a/include/asm-sh/bitops-irq.h
+++ b/arch/sh/include/asm/bitops-irq.h
diff --git a/include/asm-sh/bitops.h b/arch/sh/include/asm/bitops.h
index d7d382f63ee..d7d382f63ee 100644
--- a/include/asm-sh/bitops.h
+++ b/arch/sh/include/asm/bitops.h
diff --git a/include/asm-sh/bug.h b/arch/sh/include/asm/bug.h
index c0171804016..c0171804016 100644
--- a/include/asm-sh/bug.h
+++ b/arch/sh/include/asm/bug.h
diff --git a/include/asm-sh/bugs.h b/arch/sh/include/asm/bugs.h
index 121b2ecddfc..121b2ecddfc 100644
--- a/include/asm-sh/bugs.h
+++ b/arch/sh/include/asm/bugs.h
diff --git a/include/asm-sh/byteorder.h b/arch/sh/include/asm/byteorder.h
index 4c13e611756..4c13e611756 100644
--- a/include/asm-sh/byteorder.h
+++ b/arch/sh/include/asm/byteorder.h
diff --git a/include/asm-sh/cache.h b/arch/sh/include/asm/cache.h
index 083419f47c6..02df18ea960 100644
--- a/include/asm-sh/cache.h
+++ b/arch/sh/include/asm/cache.h
@@ -10,7 +10,7 @@
 #ifdef __KERNEL__
 
 #include <linux/init.h>
-#include <asm/cpu/cache.h>
+#include <cpu/cache.h>
 
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
diff --git a/include/asm-sh/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index e034c360411..09acbc32d6c 100644
--- a/include/asm-sh/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -27,7 +27,7 @@
 #define __flush_purge_region(start, size)	do { (void)(start); } while (0)
 #define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
 #else
-#include <asm/cpu/cacheflush.h>
+#include <cpu/cacheflush.h>
 
 /*
  * Consistent DMA requires that the __flush_xxx() primitives must be set
diff --git a/include/asm-sh/checksum.h b/arch/sh/include/asm/checksum.h
index 67496ab0ef0..67496ab0ef0 100644
--- a/include/asm-sh/checksum.h
+++ b/arch/sh/include/asm/checksum.h
diff --git a/include/asm-sh/checksum_32.h b/arch/sh/include/asm/checksum_32.h
index 14b7ac2f0a0..14b7ac2f0a0 100644
--- a/include/asm-sh/checksum_32.h
+++ b/arch/sh/include/asm/checksum_32.h
diff --git a/include/asm-sh/checksum_64.h b/arch/sh/include/asm/checksum_64.h
index 9c62a031a8f..9c62a031a8f 100644
--- a/include/asm-sh/checksum_64.h
+++ b/arch/sh/include/asm/checksum_64.h
diff --git a/include/asm-sh/clock.h b/arch/sh/include/asm/clock.h
index 720dfab7b15..720dfab7b15 100644
--- a/include/asm-sh/clock.h
+++ b/arch/sh/include/asm/clock.h
diff --git a/include/asm-sh/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
index e2681abe764..e2681abe764 100644
--- a/include/asm-sh/cmpxchg-grb.h
+++ b/arch/sh/include/asm/cmpxchg-grb.h
diff --git a/include/asm-sh/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
index 43049ec0554..43049ec0554 100644
--- a/include/asm-sh/cmpxchg-irq.h
+++ b/arch/sh/include/asm/cmpxchg-irq.h
diff --git a/include/asm-sh/cpu-features.h b/arch/sh/include/asm/cpu-features.h
index 86308aa3973..86308aa3973 100644
--- a/include/asm-sh/cpu-features.h
+++ b/arch/sh/include/asm/cpu-features.h
diff --git a/include/asm-sh/cputime.h b/arch/sh/include/asm/cputime.h
index 6ca395d1393..6ca395d1393 100644
--- a/include/asm-sh/cputime.h
+++ b/arch/sh/include/asm/cputime.h
diff --git a/include/asm-sh/current.h b/arch/sh/include/asm/current.h
index 62b63880b33..62b63880b33 100644
--- a/include/asm-sh/current.h
+++ b/arch/sh/include/asm/current.h
diff --git a/include/asm-sh/delay.h b/arch/sh/include/asm/delay.h
index 4b16bf9b56b..4b16bf9b56b 100644
--- a/include/asm-sh/delay.h
+++ b/arch/sh/include/asm/delay.h
diff --git a/include/asm-sh/device.h b/arch/sh/include/asm/device.h
index efd511d0803..efd511d0803 100644
--- a/include/asm-sh/device.h
+++ b/arch/sh/include/asm/device.h
diff --git a/include/asm-sh/div64.h b/arch/sh/include/asm/div64.h
index 6cd978cefb2..6cd978cefb2 100644
--- a/include/asm-sh/div64.h
+++ b/arch/sh/include/asm/div64.h
diff --git a/include/asm-sh/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index 627315ecdb5..627315ecdb5 100644
--- a/include/asm-sh/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
diff --git a/include/asm-sh/dma.h b/arch/sh/include/asm/dma.h
index a65b02fd186..beca7128e2a 100644
--- a/include/asm-sh/dma.h
+++ b/arch/sh/include/asm/dma.h
@@ -15,7 +15,7 @@
 #include <linux/wait.h>
 #include <linux/sched.h>
 #include <linux/sysdev.h>
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
 
 /* The maximum address that we can perform a DMA transfer to on this platform */
 /* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
diff --git a/include/asm-sh/dmabrg.h b/arch/sh/include/asm/dmabrg.h
index c5edba216cf..c5edba216cf 100644
--- a/include/asm-sh/dmabrg.h
+++ b/arch/sh/include/asm/dmabrg.h
diff --git a/include/asm-sh/edosk7705.h b/arch/sh/include/asm/edosk7705.h
index 5bdc9d9be3d..5bdc9d9be3d 100644
--- a/include/asm-sh/edosk7705.h
+++ b/arch/sh/include/asm/edosk7705.h
diff --git a/include/asm-sh/elf.h b/arch/sh/include/asm/elf.h
index f01449a8d37..f01449a8d37 100644
--- a/include/asm-sh/elf.h
+++ b/arch/sh/include/asm/elf.h
diff --git a/include/asm-sh/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h
index 108d8c48e42..108d8c48e42 100644
--- a/include/asm-sh/emergency-restart.h
+++ b/arch/sh/include/asm/emergency-restart.h
diff --git a/include/asm-sh/entry-macros.S b/arch/sh/include/asm/entry-macros.S
index 2dab0b8d945..2dab0b8d945 100644
--- a/include/asm-sh/entry-macros.S
+++ b/arch/sh/include/asm/entry-macros.S
diff --git a/include/asm-sh/errno.h b/arch/sh/include/asm/errno.h
index 51cf6f9cebb..51cf6f9cebb 100644
--- a/include/asm-sh/errno.h
+++ b/arch/sh/include/asm/errno.h
diff --git a/include/asm-sh/fb.h b/arch/sh/include/asm/fb.h
index d92e99cd8c8..d92e99cd8c8 100644
--- a/include/asm-sh/fb.h
+++ b/arch/sh/include/asm/fb.h
diff --git a/include/asm-sh/fcntl.h b/arch/sh/include/asm/fcntl.h
index 46ab12db573..46ab12db573 100644
--- a/include/asm-sh/fcntl.h
+++ b/arch/sh/include/asm/fcntl.h
diff --git a/include/asm-sh/fixmap.h b/arch/sh/include/asm/fixmap.h
index 721fcc4d5e9..721fcc4d5e9 100644
--- a/include/asm-sh/fixmap.h
+++ b/arch/sh/include/asm/fixmap.h
diff --git a/include/asm-sh/flat.h b/arch/sh/include/asm/flat.h
index 0cc800299e0..d3b2b4f109e 100644
--- a/include/asm-sh/flat.h
+++ b/arch/sh/include/asm/flat.h
@@ -21,4 +21,11 @@
 #define	flat_get_relocate_addr(rel)		(rel)
 #define	flat_set_persistent(relval, p)		({ (void)p; 0; })
 
+#define FLAT_PLAT_INIT(_r) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
 #endif /* __ASM_SH_FLAT_H */
diff --git a/include/asm-sh/fpu.h b/arch/sh/include/asm/fpu.h
index 91462fea150..91462fea150 100644
--- a/include/asm-sh/fpu.h
+++ b/arch/sh/include/asm/fpu.h
diff --git a/include/asm-sh/freq.h b/arch/sh/include/asm/freq.h
index 39c0e091cf5..4ece90b09b9 100644
--- a/include/asm-sh/freq.h
+++ b/arch/sh/include/asm/freq.h
@@ -12,7 +12,7 @@
 #define __ASM_SH_FREQ_H
 #ifdef __KERNEL__
 
-#include <asm/cpu/freq.h>
+#include <cpu/freq.h>
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_FREQ_H */
diff --git a/include/asm-sh/futex-irq.h b/arch/sh/include/asm/futex-irq.h
index a9f16a7f9ae..a9f16a7f9ae 100644
--- a/include/asm-sh/futex-irq.h
+++ b/arch/sh/include/asm/futex-irq.h
diff --git a/include/asm-sh/futex.h b/arch/sh/include/asm/futex.h
index 68256ec5fa3..68256ec5fa3 100644
--- a/include/asm-sh/futex.h
+++ b/arch/sh/include/asm/futex.h
diff --git a/include/asm-sh/gpio.h b/arch/sh/include/asm/gpio.h
index 9bb27e0f11a..cf32bd2df88 100644
--- a/include/asm-sh/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -13,7 +13,7 @@
 #define __ASM_SH_GPIO_H
 
 #if defined(CONFIG_CPU_SH3)
-#include <asm/cpu/gpio.h>
+#include <cpu/gpio.h>
 #endif
 
 #endif /* __ASM_SH_GPIO_H */
diff --git a/include/asm-sh/hardirq.h b/arch/sh/include/asm/hardirq.h
index 715ee237fc7..715ee237fc7 100644
--- a/include/asm-sh/hardirq.h
+++ b/arch/sh/include/asm/hardirq.h
diff --git a/include/asm-sh/hd64461.h b/arch/sh/include/asm/hd64461.h
index 8c1353baf00..8c1353baf00 100644
--- a/include/asm-sh/hd64461.h
+++ b/arch/sh/include/asm/hd64461.h
diff --git a/include/asm-sh/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h
index a3cdca2713d..a3cdca2713d 100644
--- a/include/asm-sh/hd64465/gpio.h
+++ b/arch/sh/include/asm/hd64465/gpio.h
diff --git a/include/asm-sh/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h
index cfd0e803d2a..cfd0e803d2a 100644
--- a/include/asm-sh/hd64465/hd64465.h
+++ b/arch/sh/include/asm/hd64465/hd64465.h
diff --git a/include/asm-sh/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h
index 139f1472e5b..139f1472e5b 100644
--- a/include/asm-sh/hd64465/io.h
+++ b/arch/sh/include/asm/hd64465/io.h
diff --git a/include/asm-sh/heartbeat.h b/arch/sh/include/asm/heartbeat.h
index 724a43ed245..724a43ed245 100644
--- a/include/asm-sh/heartbeat.h
+++ b/arch/sh/include/asm/heartbeat.h
diff --git a/include/asm-sh/hp6xx.h b/arch/sh/include/asm/hp6xx.h
index 0d4165a32dc..0d4165a32dc 100644
--- a/include/asm-sh/hp6xx.h
+++ b/arch/sh/include/asm/hp6xx.h
diff --git a/include/asm-sh/hugetlb.h b/arch/sh/include/asm/hugetlb.h
index 967068fb79a..967068fb79a 100644
--- a/include/asm-sh/hugetlb.h
+++ b/arch/sh/include/asm/hugetlb.h
diff --git a/include/asm-sh/hw_irq.h b/arch/sh/include/asm/hw_irq.h
index d557b00111b..d557b00111b 100644
--- a/include/asm-sh/hw_irq.h
+++ b/arch/sh/include/asm/hw_irq.h
diff --git a/include/asm-sh/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h
index 24182116711..24182116711 100644
--- a/include/asm-sh/i2c-sh7760.h
+++ b/arch/sh/include/asm/i2c-sh7760.h
diff --git a/include/asm-sh/ilsel.h b/arch/sh/include/asm/ilsel.h
index e3d304b280f..e3d304b280f 100644
--- a/include/asm-sh/ilsel.h
+++ b/arch/sh/include/asm/ilsel.h
diff --git a/include/asm-sh/io.h b/arch/sh/include/asm/io.h
index a4fbf0c84fb..a4fbf0c84fb 100644
--- a/include/asm-sh/io.h
+++ b/arch/sh/include/asm/io.h
diff --git a/include/asm-sh/io_generic.h b/arch/sh/include/asm/io_generic.h
index 92fc6070d7b..92fc6070d7b 100644
--- a/include/asm-sh/io_generic.h
+++ b/arch/sh/include/asm/io_generic.h
diff --git a/include/asm-sh/io_trapped.h b/arch/sh/include/asm/io_trapped.h
index f1251d4f0ba..f1251d4f0ba 100644
--- a/include/asm-sh/io_trapped.h
+++ b/arch/sh/include/asm/io_trapped.h
diff --git a/include/asm-sh/ioctl.h b/arch/sh/include/asm/ioctl.h
index b279fe06dfe..b279fe06dfe 100644
--- a/include/asm-sh/ioctl.h
+++ b/arch/sh/include/asm/ioctl.h
diff --git a/include/asm-sh/ioctls.h b/arch/sh/include/asm/ioctls.h
index c212c371a4a..c212c371a4a 100644
--- a/include/asm-sh/ioctls.h
+++ b/arch/sh/include/asm/ioctls.h
diff --git a/include/asm-sh/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
index 5ffc9972a7e..5ffc9972a7e 100644
--- a/include/asm-sh/ipcbuf.h
+++ b/arch/sh/include/asm/ipcbuf.h
diff --git a/include/asm-sh/irq.h b/arch/sh/include/asm/irq.h
index ca66e5df69d..6195a531c1b 100644
--- a/include/asm-sh/irq.h
+++ b/arch/sh/include/asm/irq.h
@@ -51,7 +51,7 @@ extern void irq_ctx_exit(int cpu);
 #endif
 
 #ifdef CONFIG_CPU_SH5
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #endif
 
 #endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/irq_regs.h b/arch/sh/include/asm/irq_regs.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-sh/irq_regs.h
+++ b/arch/sh/include/asm/irq_regs.h
diff --git a/include/asm-sh/irqflags.h b/arch/sh/include/asm/irqflags.h
index 46e71da5be6..46e71da5be6 100644
--- a/include/asm-sh/irqflags.h
+++ b/arch/sh/include/asm/irqflags.h
diff --git a/include/asm-sh/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h
index 60218f54134..60218f54134 100644
--- a/include/asm-sh/irqflags_32.h
+++ b/arch/sh/include/asm/irqflags_32.h
diff --git a/include/asm-sh/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h
index 4f6b8a56e7b..88f65222c1d 100644
--- a/include/asm-sh/irqflags_64.h
+++ b/arch/sh/include/asm/irqflags_64.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_SH_IRQFLAGS_64_H
 #define __ASM_SH_IRQFLAGS_64_H
 
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 #define SR_MASK_LL	0x00000000000000f0LL
 #define SR_BL_LL	0x0000000010000000LL
diff --git a/include/asm-sh/kdebug.h b/arch/sh/include/asm/kdebug.h
index 49cd69051a8..49cd69051a8 100644
--- a/include/asm-sh/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
diff --git a/include/asm-sh/kexec.h b/arch/sh/include/asm/kexec.h
index 00f4260ef09..765a5e1660f 100644
--- a/include/asm-sh/kexec.h
+++ b/arch/sh/include/asm/kexec.h
@@ -21,7 +21,7 @@
 /* Maximum address we can use for the control code buffer */
 #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
 
-#define KEXEC_CONTROL_CODE_SIZE	4096
+#define KEXEC_CONTROL_PAGE_SIZE	4096
 
 /* The native architecture */
 #define KEXEC_ARCH KEXEC_ARCH_SH
diff --git a/include/asm-sh/kgdb.h b/arch/sh/include/asm/kgdb.h
index 24e42078f36..24e42078f36 100644
--- a/include/asm-sh/kgdb.h
+++ b/arch/sh/include/asm/kgdb.h
diff --git a/include/asm-sh/kmap_types.h b/arch/sh/include/asm/kmap_types.h
index 84d565c696b..84d565c696b 100644
--- a/include/asm-sh/kmap_types.h
+++ b/arch/sh/include/asm/kmap_types.h
diff --git a/include/asm-sh/lboxre2.h b/arch/sh/include/asm/lboxre2.h
index e6d16050492..e6d16050492 100644
--- a/include/asm-sh/lboxre2.h
+++ b/arch/sh/include/asm/lboxre2.h
diff --git a/include/asm-sh/linkage.h b/arch/sh/include/asm/linkage.h
index 3565a4f4009..3565a4f4009 100644
--- a/include/asm-sh/linkage.h
+++ b/arch/sh/include/asm/linkage.h
diff --git a/include/asm-sh/local.h b/arch/sh/include/asm/local.h
index 9ed9b9cb459..9ed9b9cb459 100644
--- a/include/asm-sh/local.h
+++ b/arch/sh/include/asm/local.h
diff --git a/include/asm-sh/machvec.h b/arch/sh/include/asm/machvec.h
index b2e4124070a..b2e4124070a 100644
--- a/include/asm-sh/machvec.h
+++ b/arch/sh/include/asm/machvec.h
diff --git a/include/asm-sh/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h
index c644a77ee35..c644a77ee35 100644
--- a/include/asm-sh/magicpanelr2.h
+++ b/arch/sh/include/asm/magicpanelr2.h
diff --git a/include/asm-sh/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h
index 0aee96a9733..0aee96a9733 100644
--- a/include/asm-sh/mc146818rtc.h
+++ b/arch/sh/include/asm/mc146818rtc.h
diff --git a/include/asm-sh/microdev.h b/arch/sh/include/asm/microdev.h
index 1aed15856e1..1aed15856e1 100644
--- a/include/asm-sh/microdev.h
+++ b/arch/sh/include/asm/microdev.h
diff --git a/include/asm-sh/migor.h b/arch/sh/include/asm/migor.h
index 10016e0f4a4..c12b632c540 100644
--- a/include/asm-sh/migor.h
+++ b/arch/sh/include/asm/migor.h
@@ -42,9 +42,6 @@
 
 #define PORT_MSELCRB 0xa4050182
 
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
 #define PORT_PSELA 0xa405014e
 #define PORT_PSELB 0xa4050150
 #define PORT_PSELC 0xa4050152
diff --git a/include/asm-sh/mman.h b/arch/sh/include/asm/mman.h
index 156eb0225cf..156eb0225cf 100644
--- a/include/asm-sh/mman.h
+++ b/arch/sh/include/asm/mman.h
diff --git a/include/asm-sh/mmu.h b/arch/sh/include/asm/mmu.h
index fdcb93bc6d1..fdcb93bc6d1 100644
--- a/include/asm-sh/mmu.h
+++ b/arch/sh/include/asm/mmu.h
diff --git a/include/asm-sh/mmu_context.h b/arch/sh/include/asm/mmu_context.h
index 8589a50febd..04c0c9733ad 100644
--- a/include/asm-sh/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -8,7 +8,7 @@
 #define __ASM_SH_MMU_CONTEXT_H
 
 #ifdef __KERNEL__
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/tlbflush.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
diff --git a/include/asm-sh/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
index f4f9aebd68b..f4f9aebd68b 100644
--- a/include/asm-sh/mmu_context_32.h
+++ b/arch/sh/include/asm/mmu_context_32.h
diff --git a/include/asm-sh/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h
index 9649f1c07ca..de121025d87 100644
--- a/include/asm-sh/mmu_context_64.h
+++ b/arch/sh/include/asm/mmu_context_64.h
@@ -11,7 +11,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 #include <asm/cacheflush.h>
 
 #define SR_ASID_MASK		0xffffffffff00ffffULL
diff --git a/include/asm-sh/mmzone.h b/arch/sh/include/asm/mmzone.h
index 2969253c404..2969253c404 100644
--- a/include/asm-sh/mmzone.h
+++ b/arch/sh/include/asm/mmzone.h
diff --git a/include/asm-sh/module.h b/arch/sh/include/asm/module.h
index 46eccd33166..46eccd33166 100644
--- a/include/asm-sh/module.h
+++ b/arch/sh/include/asm/module.h
diff --git a/include/asm-sh/msgbuf.h b/arch/sh/include/asm/msgbuf.h
index 517432343fb..517432343fb 100644
--- a/include/asm-sh/msgbuf.h
+++ b/arch/sh/include/asm/msgbuf.h
diff --git a/include/asm-sh/mutex.h b/arch/sh/include/asm/mutex.h
index 458c1f7fbc1..458c1f7fbc1 100644
--- a/include/asm-sh/mutex.h
+++ b/arch/sh/include/asm/mutex.h
diff --git a/include/asm-sh/page.h b/arch/sh/include/asm/page.h
index 77fb8bf02e4..77fb8bf02e4 100644
--- a/include/asm-sh/page.h
+++ b/arch/sh/include/asm/page.h
diff --git a/include/asm-sh/param.h b/arch/sh/include/asm/param.h
index ae245afdfd6..ae245afdfd6 100644
--- a/include/asm-sh/param.h
+++ b/arch/sh/include/asm/param.h
diff --git a/include/asm-sh/parport.h b/arch/sh/include/asm/parport.h
index f67ba60a2ac..f67ba60a2ac 100644
--- a/include/asm-sh/parport.h
+++ b/arch/sh/include/asm/parport.h
diff --git a/include/asm-sh/pci.h b/arch/sh/include/asm/pci.h
index df1d383e18a..df1d383e18a 100644
--- a/include/asm-sh/pci.h
+++ b/arch/sh/include/asm/pci.h
diff --git a/include/asm-sh/percpu.h b/arch/sh/include/asm/percpu.h
index 4db4b39a439..4db4b39a439 100644
--- a/include/asm-sh/percpu.h
+++ b/arch/sh/include/asm/percpu.h
diff --git a/include/asm-sh/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 84dd2db7104..84dd2db7104 100644
--- a/include/asm-sh/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
diff --git a/include/asm-sh/pgtable.h b/arch/sh/include/asm/pgtable.h
index a4a8f8b9346..a4a8f8b9346 100644
--- a/include/asm-sh/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
diff --git a/include/asm-sh/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index 72ea209195b..72ea209195b 100644
--- a/include/asm-sh/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
diff --git a/include/asm-sh/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
index c78990cda55..c78990cda55 100644
--- a/include/asm-sh/pgtable_64.h
+++ b/arch/sh/include/asm/pgtable_64.h
diff --git a/include/asm-sh/pm.h b/arch/sh/include/asm/pm.h
index 56fdbd6b1c9..56fdbd6b1c9 100644
--- a/include/asm-sh/pm.h
+++ b/arch/sh/include/asm/pm.h
diff --git a/include/asm-sh/poll.h b/arch/sh/include/asm/poll.h
index c98509d3149..c98509d3149 100644
--- a/include/asm-sh/poll.h
+++ b/arch/sh/include/asm/poll.h
diff --git a/include/asm-sh/posix_types.h b/arch/sh/include/asm/posix_types.h
index 4eeb723aee7..4eeb723aee7 100644
--- a/include/asm-sh/posix_types.h
+++ b/arch/sh/include/asm/posix_types.h
diff --git a/include/asm-sh/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
index 0a3d2f54ab2..0a3d2f54ab2 100644
--- a/include/asm-sh/posix_types_32.h
+++ b/arch/sh/include/asm/posix_types_32.h
diff --git a/include/asm-sh/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
index 0620317a6f0..0620317a6f0 100644
--- a/include/asm-sh/posix_types_64.h
+++ b/arch/sh/include/asm/posix_types_64.h
diff --git a/include/asm-sh/processor.h b/arch/sh/include/asm/processor.h
index 15d9f92ca38..15d9f92ca38 100644
--- a/include/asm-sh/processor.h
+++ b/arch/sh/include/asm/processor.h
diff --git a/include/asm-sh/processor_32.h b/arch/sh/include/asm/processor_32.h
index c6583f26707..0dadd75bd93 100644
--- a/include/asm-sh/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -19,7 +19,7 @@
  * Default implementation of macro that returns current
  * instruction pointer ("program counter").
  */
-#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n1:":"=z" (pc)); pc; })
+#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n.align 2\n1:":"=z" (pc)); pc; })
 
 /* Core Processor Version Register */
 #define CCN_PVR		0xff000030
diff --git a/include/asm-sh/processor_64.h b/arch/sh/include/asm/processor_64.h
index fc7fc685ba2..770d5169983 100644
--- a/include/asm-sh/processor_64.h
+++ b/arch/sh/include/asm/processor_64.h
@@ -19,7 +19,7 @@
 #include <asm/types.h>
 #include <asm/cache.h>
 #include <asm/ptrace.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /*
  * Default implementation of macro that returns current
diff --git a/include/asm-sh/ptrace.h b/arch/sh/include/asm/ptrace.h
index 643ab5a7cf3..b86aeabba61 100644
--- a/include/asm-sh/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -104,6 +104,15 @@ struct pt_dspregs {
 
 extern void show_regs(struct pt_regs *);
 
+/*
+ * These are defined as per linux/ptrace.h.
+ */
+struct task_struct;
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
 #ifdef CONFIG_SH_DSP
 #define task_pt_regs(task) \
 	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
diff --git a/include/asm-sh/push-switch.h b/arch/sh/include/asm/push-switch.h
index 4903f9e52dd..4903f9e52dd 100644
--- a/include/asm-sh/push-switch.h
+++ b/arch/sh/include/asm/push-switch.h
diff --git a/include/asm-sh/r7780rp.h b/arch/sh/include/asm/r7780rp.h
index 306f7359f7d..306f7359f7d 100644
--- a/include/asm-sh/r7780rp.h
+++ b/arch/sh/include/asm/r7780rp.h
diff --git a/include/asm-sh/resource.h b/arch/sh/include/asm/resource.h
index 9c2499a86ec..9c2499a86ec 100644
--- a/include/asm-sh/resource.h
+++ b/arch/sh/include/asm/resource.h
diff --git a/include/asm-sh/rtc.h b/arch/sh/include/asm/rtc.h
index ec45ba8e11d..1813f4202a2 100644
--- a/include/asm-sh/rtc.h
+++ b/arch/sh/include/asm/rtc.h
@@ -11,6 +11,6 @@ struct sh_rtc_platform_info {
 	unsigned long capabilities;
 };
 
-#include <asm/cpu/rtc.h>
+#include <cpu/rtc.h>
 
 #endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h
index 0a800157b82..0a800157b82 100644
--- a/include/asm-sh/rts7751r2d.h
+++ b/arch/sh/include/asm/rts7751r2d.h
diff --git a/include/asm-sh/rwsem.h b/arch/sh/include/asm/rwsem.h
index 1987f3ea7f1..1987f3ea7f1 100644
--- a/include/asm-sh/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
diff --git a/include/asm-sh/scatterlist.h b/arch/sh/include/asm/scatterlist.h
index 2084d037369..2084d037369 100644
--- a/include/asm-sh/scatterlist.h
+++ b/arch/sh/include/asm/scatterlist.h
diff --git a/include/asm-sh/sdk7780.h b/arch/sh/include/asm/sdk7780.h
index 697dc865f21..697dc865f21 100644
--- a/include/asm-sh/sdk7780.h
+++ b/arch/sh/include/asm/sdk7780.h
diff --git a/arch/sh/include/asm/seccomp.h b/arch/sh/include/asm/seccomp.h
new file mode 100644
index 00000000000..3280ed3802e
--- /dev/null
+++ b/arch/sh/include/asm/seccomp.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#endif /* __ASM_SECCOMP_H */
diff --git a/include/asm-sh/sections.h b/arch/sh/include/asm/sections.h
index 8f8f4ad400d..8f8f4ad400d 100644
--- a/include/asm-sh/sections.h
+++ b/arch/sh/include/asm/sections.h
diff --git a/include/asm-sh/segment.h b/arch/sh/include/asm/segment.h
index 5e2725f4ac4..5e2725f4ac4 100644
--- a/include/asm-sh/segment.h
+++ b/arch/sh/include/asm/segment.h
diff --git a/include/asm-sh/sembuf.h b/arch/sh/include/asm/sembuf.h
index d79f3bd570b..d79f3bd570b 100644
--- a/include/asm-sh/sembuf.h
+++ b/arch/sh/include/asm/sembuf.h
diff --git a/include/asm-sh/serial.h b/arch/sh/include/asm/serial.h
index 21f6d330f18..e13cc948ee6 100644
--- a/include/asm-sh/serial.h
+++ b/arch/sh/include/asm/serial.h
@@ -21,7 +21,7 @@
 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
 
 #ifdef CONFIG_HD64465
-#include <asm/hd64465.h>
+#include <asm/hd64465/hd64465.h>
 
 #define SERIAL_PORT_DFNS                   \
         /* UART CLK   PORT IRQ     FLAGS        */                      \
diff --git a/include/asm-sh/setup.h b/arch/sh/include/asm/setup.h
index 55a2bd328d9..55a2bd328d9 100644
--- a/include/asm-sh/setup.h
+++ b/arch/sh/include/asm/setup.h
diff --git a/include/asm-sh/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
index d3c548443f2..d3c548443f2 100644
--- a/include/asm-sh/sfp-machine.h
+++ b/arch/sh/include/asm/sfp-machine.h
diff --git a/include/asm-sh/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h
index 8767f61acec..8767f61acec 100644
--- a/include/asm-sh/sh7760fb.h
+++ b/arch/sh/include/asm/sh7760fb.h
diff --git a/include/asm-sh/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h
index 8750cc85297..8750cc85297 100644
--- a/include/asm-sh/sh7763rdp.h
+++ b/arch/sh/include/asm/sh7763rdp.h
diff --git a/include/asm-sh/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h
index 1ce27d5c749..1ce27d5c749 100644
--- a/include/asm-sh/sh7785lcr.h
+++ b/arch/sh/include/asm/sh7785lcr.h
diff --git a/include/asm-sh/sh_bios.h b/arch/sh/include/asm/sh_bios.h
index 0ca261956e3..0ca261956e3 100644
--- a/include/asm-sh/sh_bios.h
+++ b/arch/sh/include/asm/sh_bios.h
diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h
new file mode 100644
index 00000000000..bb832584f3c
--- /dev/null
+++ b/arch/sh/include/asm/sh_eth.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_SH_ETH_H__
+#define __ASM_SH_ETH_H__
+
+enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
+
+struct sh_eth_plat_data {
+	int phy;
+	int edmac_endian;
+};
+
+#endif
diff --git a/include/asm-sh/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h
index b5a4dd5a972..b5a4dd5a972 100644
--- a/include/asm-sh/sh_keysc.h
+++ b/arch/sh/include/asm/sh_keysc.h
diff --git a/include/asm-sh/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h
index 27677727df4..130102f663f 100644
--- a/include/asm-sh/sh_mobile_lcdc.h
+++ b/arch/sh/include/asm/sh_mobile_lcdc.h
@@ -47,12 +47,18 @@ struct sh_mobile_lcdc_board_cfg {
 	void (*display_off)(void *board_data);
 };
 
+struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
+	unsigned long width;
+	unsigned long height;
+};
+
 struct sh_mobile_lcdc_chan_cfg {
 	int chan;
 	int bpp;
 	int interface_type; /* selects RGBn or SYSn I/F, see above */
 	int clock_divider;
 	struct fb_videomode lcd_cfg;
+	struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
 	struct sh_mobile_lcdc_board_cfg board_cfg;
 	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
 };
diff --git a/include/asm-sh/shmbuf.h b/arch/sh/include/asm/shmbuf.h
index b2101f49052..b2101f49052 100644
--- a/include/asm-sh/shmbuf.h
+++ b/arch/sh/include/asm/shmbuf.h
diff --git a/include/asm-sh/shmin.h b/arch/sh/include/asm/shmin.h
index 36ba138a81f..36ba138a81f 100644
--- a/include/asm-sh/shmin.h
+++ b/arch/sh/include/asm/shmin.h
diff --git a/include/asm-sh/shmparam.h b/arch/sh/include/asm/shmparam.h
index ba1758d9010..ba1758d9010 100644
--- a/include/asm-sh/shmparam.h
+++ b/arch/sh/include/asm/shmparam.h
diff --git a/include/asm-sh/sigcontext.h b/arch/sh/include/asm/sigcontext.h
index 8ce1435bc0b..8ce1435bc0b 100644
--- a/include/asm-sh/sigcontext.h
+++ b/arch/sh/include/asm/sigcontext.h
diff --git a/include/asm-sh/siginfo.h b/arch/sh/include/asm/siginfo.h
index 813040ed68a..813040ed68a 100644
--- a/include/asm-sh/siginfo.h
+++ b/arch/sh/include/asm/siginfo.h
diff --git a/include/asm-sh/signal.h b/arch/sh/include/asm/signal.h
index 5c5c1e85208..5c5c1e85208 100644
--- a/include/asm-sh/signal.h
+++ b/arch/sh/include/asm/signal.h
diff --git a/include/asm-sh/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h
index 585da2a8fc4..585da2a8fc4 100644
--- a/include/asm-sh/smc37c93x.h
+++ b/arch/sh/include/asm/smc37c93x.h
diff --git a/include/asm-sh/smp.h b/arch/sh/include/asm/smp.h
index 593343cd26e..593343cd26e 100644
--- a/include/asm-sh/smp.h
+++ b/arch/sh/include/asm/smp.h
diff --git a/include/asm-sh/snapgear.h b/arch/sh/include/asm/snapgear.h
index 042d95f51c4..042d95f51c4 100644
--- a/include/asm-sh/snapgear.h
+++ b/arch/sh/include/asm/snapgear.h
diff --git a/include/asm-sh/socket.h b/arch/sh/include/asm/socket.h
index 6d4bf651295..6d4bf651295 100644
--- a/include/asm-sh/socket.h
+++ b/arch/sh/include/asm/socket.h
diff --git a/include/asm-sh/sockios.h b/arch/sh/include/asm/sockios.h
index cf8b96b1f9a..cf8b96b1f9a 100644
--- a/include/asm-sh/sockios.h
+++ b/arch/sh/include/asm/sockios.h
diff --git a/include/asm-sh/sparsemem.h b/arch/sh/include/asm/sparsemem.h
index 547a540b666..547a540b666 100644
--- a/include/asm-sh/sparsemem.h
+++ b/arch/sh/include/asm/sparsemem.h
diff --git a/include/asm-sh/spi.h b/arch/sh/include/asm/spi.h
index e96f5b0953c..e96f5b0953c 100644
--- a/include/asm-sh/spi.h
+++ b/arch/sh/include/asm/spi.h
diff --git a/include/asm-sh/spinlock.h b/arch/sh/include/asm/spinlock.h
index e793181d64d..e793181d64d 100644
--- a/include/asm-sh/spinlock.h
+++ b/arch/sh/include/asm/spinlock.h
diff --git a/include/asm-sh/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h
index b4d244e7b60..b4d244e7b60 100644
--- a/include/asm-sh/spinlock_types.h
+++ b/arch/sh/include/asm/spinlock_types.h
diff --git a/include/asm-sh/stat.h b/arch/sh/include/asm/stat.h
index e1810cc6e3d..e1810cc6e3d 100644
--- a/include/asm-sh/stat.h
+++ b/arch/sh/include/asm/stat.h
diff --git a/include/asm-sh/statfs.h b/arch/sh/include/asm/statfs.h
index 9202a023328..9202a023328 100644
--- a/include/asm-sh/statfs.h
+++ b/arch/sh/include/asm/statfs.h
diff --git a/include/asm-sh/string.h b/arch/sh/include/asm/string.h
index 8c1ea21dc0a..8c1ea21dc0a 100644
--- a/include/asm-sh/string.h
+++ b/arch/sh/include/asm/string.h
diff --git a/include/asm-sh/string_32.h b/arch/sh/include/asm/string_32.h
index 55f8db6bc1d..55f8db6bc1d 100644
--- a/include/asm-sh/string_32.h
+++ b/arch/sh/include/asm/string_32.h
diff --git a/include/asm-sh/string_64.h b/arch/sh/include/asm/string_64.h
index aa1fef229c7..aa1fef229c7 100644
--- a/include/asm-sh/string_64.h
+++ b/arch/sh/include/asm/string_64.h
diff --git a/include/asm-sh/system.h b/arch/sh/include/asm/system.h
index 056d68cd210..056d68cd210 100644
--- a/include/asm-sh/system.h
+++ b/arch/sh/include/asm/system.h
diff --git a/include/asm-sh/system_32.h b/arch/sh/include/asm/system_32.h
index f11bcf0855e..f11bcf0855e 100644
--- a/include/asm-sh/system_32.h
+++ b/arch/sh/include/asm/system_32.h
diff --git a/include/asm-sh/system_64.h b/arch/sh/include/asm/system_64.h
index 943acf5ea07..943acf5ea07 100644
--- a/include/asm-sh/system_64.h
+++ b/arch/sh/include/asm/system_64.h
diff --git a/include/asm-sh/systemh7751.h b/arch/sh/include/asm/systemh7751.h
index 4161122c84e..4161122c84e 100644
--- a/include/asm-sh/systemh7751.h
+++ b/arch/sh/include/asm/systemh7751.h
diff --git a/include/asm-sh/termbits.h b/arch/sh/include/asm/termbits.h
index 77db116948c..77db116948c 100644
--- a/include/asm-sh/termbits.h
+++ b/arch/sh/include/asm/termbits.h
diff --git a/include/asm-sh/termios.h b/arch/sh/include/asm/termios.h
index 0a8c793c76f..0a8c793c76f 100644
--- a/include/asm-sh/termios.h
+++ b/arch/sh/include/asm/termios.h
diff --git a/include/asm-sh/thread_info.h b/arch/sh/include/asm/thread_info.h
index eeb4c747119..0a894cafb1d 100644
--- a/include/asm-sh/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -117,24 +117,45 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_RESTORE_SIGMASK	3	/* restore signal mask in do_signal() */
 #define TIF_SINGLESTEP		4	/* singlestepping active */
-#define TIF_SYSCALL_AUDIT	5
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SECCOMP		6	/* secure computing */
+#define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18
-#define TIF_FREEZE		19
-
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
-#define _TIF_SYSCALL_AUDIT		(1<<TIF_SYSCALL_AUDIT)
-#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
-
-#define _TIF_WORK_MASK		0x000000FE	/* work to do on interrupt/exception return */
-#define _TIF_ALLWORK_MASK	0x000000FF	/* work to do on any return to u-space */
+#define TIF_FREEZE		19	/* Freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_USEDFPU		(1 << TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+
+/*
+ * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within a byte, or we
+ * blow the tst immediate size constraints and need to fix up
+ * arch/sh/kernel/entry-common.S.
+ */
+
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK	(_TIF_SYSCALL_TRACE | _TIF_SIGPENDING      | \
+				 _TIF_NEED_RESCHED  | _TIF_SYSCALL_AUDIT   | \
+				 _TIF_SINGLESTEP    | _TIF_RESTORE_SIGMASK | \
+				 _TIF_NOTIFY_RESUME)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK		(_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
 
 #endif /* __KERNEL__ */
 
diff --git a/include/asm-sh/timer.h b/arch/sh/include/asm/timer.h
index 327f7eb8976..a7ca3a195bb 100644
--- a/include/asm-sh/timer.h
+++ b/arch/sh/include/asm/timer.h
@@ -3,7 +3,7 @@
 
 #include <linux/sysdev.h>
 #include <linux/clocksource.h>
-#include <asm/cpu/timer.h>
+#include <cpu/timer.h>
 
 struct sys_timer_ops {
 	int (*init)(void);
diff --git a/include/asm-sh/timex.h b/arch/sh/include/asm/timex.h
index a873e24113c..a873e24113c 100644
--- a/include/asm-sh/timex.h
+++ b/arch/sh/include/asm/timex.h
diff --git a/include/asm-sh/titan.h b/arch/sh/include/asm/titan.h
index 03f3583c891..03f3583c891 100644
--- a/include/asm-sh/titan.h
+++ b/arch/sh/include/asm/titan.h
diff --git a/include/asm-sh/tlb.h b/arch/sh/include/asm/tlb.h
index 88ff1ae8a6b..88ff1ae8a6b 100644
--- a/include/asm-sh/tlb.h
+++ b/arch/sh/include/asm/tlb.h
diff --git a/include/asm-sh/tlb_64.h b/arch/sh/include/asm/tlb_64.h
index 0a96f3af69e..ef0ae2a28f2 100644
--- a/include/asm-sh/tlb_64.h
+++ b/arch/sh/include/asm/tlb_64.h
@@ -21,11 +21,9 @@
 #ifndef __ASSEMBLY__
 
 /**
- * for_each_dtlb_entry
+ * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries
  *
  * @tlb:	TLB entry
- *
- * Iterate over free (non-wired) DTLB entries
  */
 #define for_each_dtlb_entry(tlb)		\
 	for (tlb  = cpu_data->dtlb.first;	\
@@ -33,11 +31,9 @@
 	     tlb += cpu_data->dtlb.step)
 
 /**
- * for_each_itlb_entry
+ * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries
  *
  * @tlb:	TLB entry
- *
- * Iterate over free (non-wired) ITLB entries
  */
 #define for_each_itlb_entry(tlb)		\
 	for (tlb  = cpu_data->itlb.first;	\
@@ -45,11 +41,9 @@
 	     tlb += cpu_data->itlb.step)
 
 /**
- * __flush_tlb_slot
+ * __flush_tlb_slot - Flushes TLB slot @slot.
  *
  * @slot:	Address of TLB slot.
- *
- * Flushes TLB slot @slot.
  */
 static inline void __flush_tlb_slot(unsigned long long slot)
 {
diff --git a/include/asm-sh/tlbflush.h b/arch/sh/include/asm/tlbflush.h
index e0ac97221ae..e0ac97221ae 100644
--- a/include/asm-sh/tlbflush.h
+++ b/arch/sh/include/asm/tlbflush.h
diff --git a/include/asm-sh/topology.h b/arch/sh/include/asm/topology.h
index 95f0085e098..95f0085e098 100644
--- a/include/asm-sh/topology.h
+++ b/arch/sh/include/asm/topology.h
diff --git a/include/asm-sh/types.h b/arch/sh/include/asm/types.h
index beea4e6f8df..beea4e6f8df 100644
--- a/include/asm-sh/types.h
+++ b/arch/sh/include/asm/types.h
diff --git a/include/asm-sh/uaccess.h b/arch/sh/include/asm/uaccess.h
index 45c2c9b2993..075848f43b6 100644
--- a/include/asm-sh/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -77,8 +77,9 @@ struct __large_struct { unsigned long buf[100]; };
 ({								\
 	long __pu_err;						\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
 	__chk_user_ptr(ptr);					\
-	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__put_user_size(__pu_val, __pu_addr, (size), __pu_err);	\
 	__pu_err;						\
 })
 
@@ -86,8 +87,9 @@ struct __large_struct { unsigned long buf[100]; };
 ({								\
 	long __pu_err = -EFAULT;				\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
 	if (likely(access_ok(VERIFY_WRITE, __pu_addr, size)))	\
-		__put_user_size((x), __pu_addr, (size),		\
+		__put_user_size(__pu_val, __pu_addr, (size),	\
 				__pu_err);			\
 	__pu_err;						\
 })
diff --git a/include/asm-sh/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
index 892fd6dea9d..ae0d24f6653 100644
--- a/include/asm-sh/uaccess_32.h
+++ b/arch/sh/include/asm/uaccess_32.h
@@ -76,8 +76,7 @@ do {							\
 		__put_user_asm(x, ptr, retval, "w");	\
 		break;					\
 	case 4:						\
-		__put_user_asm((u32)x, ptr,		\
-			       retval, "l");		\
+		__put_user_asm(x, ptr, retval, "l");	\
 		break;					\
 	case 8:						\
 		__put_user_u64(x, ptr, retval);		\
diff --git a/include/asm-sh/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
index 81b3d515fcb..5580fd47100 100644
--- a/include/asm-sh/uaccess_64.h
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -76,4 +76,6 @@ extern long __put_user_asm_l(void *, long);
 extern long __put_user_asm_q(void *, long);
 extern void __put_user_unknown(void);
 
+extern long __strnlen_user(const char *__s, long __n);
+
 #endif /* __ASM_SH_UACCESS_64_H */
diff --git a/include/asm-sh/ubc.h b/arch/sh/include/asm/ubc.h
index 56f4e30dc49..a7b9028bbfb 100644
--- a/include/asm-sh/ubc.h
+++ b/arch/sh/include/asm/ubc.h
@@ -12,7 +12,7 @@
 #define __ASM_SH_UBC_H
 #ifdef __KERNEL__
 
-#include <asm/cpu/ubc.h>
+#include <cpu/ubc.h>
 
 /* User Break Controller */
 #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
diff --git a/include/asm-sh/ucontext.h b/arch/sh/include/asm/ucontext.h
index 202ef1d5a3c..202ef1d5a3c 100644
--- a/include/asm-sh/ucontext.h
+++ b/arch/sh/include/asm/ucontext.h
diff --git a/include/asm-sh/unaligned.h b/arch/sh/include/asm/unaligned.h
index c1641a01d50..c1641a01d50 100644
--- a/include/asm-sh/unaligned.h
+++ b/arch/sh/include/asm/unaligned.h
diff --git a/include/asm-sh/unistd.h b/arch/sh/include/asm/unistd.h
index 65be656ead7..65be656ead7 100644
--- a/include/asm-sh/unistd.h
+++ b/arch/sh/include/asm/unistd.h
diff --git a/include/asm-sh/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index d52c000cf92..d52c000cf92 100644
--- a/include/asm-sh/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
diff --git a/include/asm-sh/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 7c54e91753c..7c54e91753c 100644
--- a/include/asm-sh/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
diff --git a/include/asm-sh/user.h b/arch/sh/include/asm/user.h
index 8fd3cf6c58d..8fd3cf6c58d 100644
--- a/include/asm-sh/user.h
+++ b/arch/sh/include/asm/user.h
diff --git a/include/asm-sh/vga.h b/arch/sh/include/asm/vga.h
index 06a5de8ace1..06a5de8ace1 100644
--- a/include/asm-sh/vga.h
+++ b/arch/sh/include/asm/vga.h
diff --git a/include/asm-sh/watchdog.h b/arch/sh/include/asm/watchdog.h
index d19ea62ef8c..f024fed00a7 100644
--- a/include/asm-sh/watchdog.h
+++ b/arch/sh/include/asm/watchdog.h
@@ -13,11 +13,11 @@
 #ifdef __KERNEL__
 
 #include <linux/types.h>
-#include <asm/cpu/watchdog.h>
+#include <cpu/watchdog.h>
 #include <asm/io.h>
 
 /* 
- * See asm/cpu-sh2/watchdog.h for explanation of this stupidity..
+ * See cpu-sh2/watchdog.h for explanation of this stupidity..
  */
 #ifndef WTCNT_R
 #  define WTCNT_R	WTCNT
diff --git a/include/asm-sh/xor.h b/arch/sh/include/asm/xor.h
index c82eb12a5b1..c82eb12a5b1 100644
--- a/include/asm-sh/xor.h
+++ b/arch/sh/include/asm/xor.h
diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h
index 2b9ab93efa4..2b9ab93efa4 100644
--- a/include/asm-sh/cpu-sh2/addrspace.h
+++ b/arch/sh/include/cpu-common/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
index 2979efb26de..c3db00b7360 100644
--- a/include/asm-sh/cpu-sh2/cacheflush.h
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -10,7 +10,7 @@
 #ifndef __ASM_CPU_SH2_CACHEFLUSH_H
 #define __ASM_CPU_SH2_CACHEFLUSH_H
 
-/* 
+/*
  * Cache flushing:
  *
  *  - flush_cache_all() flushes entire cache
@@ -40,5 +40,5 @@
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
 
 #define p3_cache_init()				do { } while (0)
-#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
 
+#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h
index beeb299e01e..beeb299e01e 100644
--- a/include/asm-sh/cpu-sh2/mmu_context.h
+++ b/arch/sh/include/cpu-common/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh2/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h
index 39e2d6e9478..39e2d6e9478 100644
--- a/include/asm-sh/cpu-sh2/rtc.h
+++ b/arch/sh/include/cpu-common/cpu/rtc.h
diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h
index fe5c15dd6e8..fe5c15dd6e8 100644
--- a/include/asm-sh/cpu-sh2/sigcontext.h
+++ b/arch/sh/include/cpu-common/cpu/sigcontext.h
diff --git a/include/asm-sh/cpu-sh2/timer.h b/arch/sh/include/cpu-common/cpu/timer.h
index a39c241e819..a39c241e819 100644
--- a/include/asm-sh/cpu-sh2/timer.h
+++ b/arch/sh/include/cpu-common/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh2/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h
index 4e0b1650068..673515bc413 100644
--- a/include/asm-sh/cpu-sh2/cache.h
+++ b/arch/sh/include/cpu-sh2/cpu/cache.h
@@ -21,11 +21,11 @@
 #define CCR		0xffffffec
 
 #define CCR_CACHE_CE	0x01	/* Cache enable */
-#define CCR_CACHE_WT	0x06    /* CCR[bit1=1,bit2=1] */
+#define CCR_CACHE_WT	0x02    /* CCR[bit1=1,bit2=1] */
 				/* 0x00000000-0x7fffffff: Write-through  */
 				/* 0x80000000-0x9fffffff: Write-back     */
                                 /* 0xc0000000-0xdfffffff: Write-through  */
-#define CCR_CACHE_CB	0x00    /* CCR[bit1=0,bit2=0] */
+#define CCR_CACHE_CB	0x04    /* CCR[bit1=0,bit2=0] */
 				/* 0x00000000-0x7fffffff: Write-back     */
 				/* 0x80000000-0x9fffffff: Write-through  */
                                 /* 0xc0000000-0xdfffffff: Write-back     */
@@ -36,6 +36,8 @@
 
 #define CCR_CACHE_ENABLE	CCR_CACHE_CE
 #define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
 #endif
 
 #endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/include/asm-sh/cpu-sh2/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h
index d66b43cdc63..d66b43cdc63 100644
--- a/include/asm-sh/cpu-sh2/dma.h
+++ b/arch/sh/include/cpu-sh2/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh2/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h
index 31de475da70..31de475da70 100644
--- a/include/asm-sh/cpu-sh2/freq.h
+++ b/arch/sh/include/cpu-sh2/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh2/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h
index ba0e87f19c7..ba0e87f19c7 100644
--- a/include/asm-sh/cpu-sh2/ubc.h
+++ b/arch/sh/include/cpu-sh2/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
index 393161c9c6d..393161c9c6d 100644
--- a/include/asm-sh/cpu-sh2/watchdog.h
+++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
index 795ddd6856a..31eb4b58aa6 100644
--- a/include/asm-sh/cpu-sh2a/addrspace.h
+++ b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
@@ -4,7 +4,7 @@
 #define P0SEG		0x00000000
 #define P1SEG		0x00000000
 #define P2SEG		0x20000000
-#define P3SEG		0x00000000
-#define P4SEG		0x80000000
+#define P3SEG		0x40000000
+#define P4SEG		0x60000000
 
 #endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh2a/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h
index afe228b3f49..defb0baa5a0 100644
--- a/include/asm-sh/cpu-sh2a/cache.h
+++ b/arch/sh/include/cpu-sh2a/cpu/cache.h
@@ -36,5 +36,8 @@
 
 #define CCR_CACHE_ENABLE	(CCR_CACHE_OCE | CCR_CACHE_ICE)
 #define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI | CCR_CACHE_ICI)
+#define CCR_ICACHE_INVALIDATE	CCR_CACHE_ICI
+#define CCR_OCACHE_INVALIDATE	CCR_CACHE_OCI
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
 
 #endif /* __ASM_CPU_SH2A_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
new file mode 100644
index 00000000000..3d3b9205d2a
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_CPU_SH2A_CACHEFLUSH_H
+#define __ASM_CPU_SH2A_CACHEFLUSH_H
+
+/* 
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ *  Caches are indexed (effectively) by physical address on SH-2, so
+ *  we don't need them.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+void flush_icache_range(unsigned long start, unsigned long end);
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+#endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h
new file mode 100644
index 00000000000..27a13ef4fdf
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/dma.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h
index 830fd43b6cd..830fd43b6cd 100644
--- a/include/asm-sh/cpu-sh2a/freq.h
+++ b/arch/sh/include/cpu-sh2a/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h
index afb511e2bed..afb511e2bed 100644
--- a/include/asm-sh/cpu-sh2a/rtc.h
+++ b/arch/sh/include/cpu-sh2a/cpu/rtc.h
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
new file mode 100644
index 00000000000..8ce2fc1cf62
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/ubc.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
new file mode 100644
index 00000000000..e7e8259e468
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h
index b289e3ca19a..b289e3ca19a 100644
--- a/include/asm-sh/cpu-sh3/adc.h
+++ b/arch/sh/include/cpu-sh3/cpu/adc.h
diff --git a/include/asm-sh/cpu-sh3/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h
index bee2d81c56b..bee2d81c56b 100644
--- a/include/asm-sh/cpu-sh3/cache.h
+++ b/arch/sh/include/cpu-sh3/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
index f70d8ef76a1..1ac27aae670 100644
--- a/include/asm-sh/cpu-sh3/cacheflush.h
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -10,25 +10,7 @@
 #ifndef __ASM_CPU_SH3_CACHEFLUSH_H
 #define __ASM_CPU_SH3_CACHEFLUSH_H
 
-/*
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-3, so
- *  we don't need them.
- */
-
 #if defined(CONFIG_SH7705_CACHE_32KB)
-
 /* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
  * SH4. Unlike the SH4 this is a unified cache so we need to do some work
  * in mmap when 'exec'ing a new binary
@@ -47,16 +29,6 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned l
 void flush_dcache_page(struct page *pg);
 void flush_icache_range(unsigned long start, unsigned long end);
 void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-#else
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#endif
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
@@ -67,4 +39,8 @@ void flush_icache_page(struct vm_area_struct *vma, struct page *page);
 
 #define p3_cache_init()				do { } while (0)
 
+#else
+#include <cpu-common/cpu/cacheflush.h>
+#endif
+
 #endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh3/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
index 05fda8316eb..05fda8316eb 100644
--- a/include/asm-sh/cpu-sh3/dac.h
+++ b/arch/sh/include/cpu-sh3/cpu/dac.h
diff --git a/include/asm-sh/cpu-sh3/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
index 6813c3220a1..6813c3220a1 100644
--- a/include/asm-sh/cpu-sh3/dma.h
+++ b/arch/sh/include/cpu-sh3/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh3/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h
index 53c62302b2e..53c62302b2e 100644
--- a/include/asm-sh/cpu-sh3/freq.h
+++ b/arch/sh/include/cpu-sh3/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh3/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h
index 4e53eb314b8..4e53eb314b8 100644
--- a/include/asm-sh/cpu-sh3/gpio.h
+++ b/arch/sh/include/cpu-sh3/cpu/gpio.h
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
index ab09da73ce7..ab09da73ce7 100644
--- a/include/asm-sh/cpu-sh3/mmu_context.h
+++ b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh3/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h
index 793acf12aa0..793acf12aa0 100644
--- a/include/asm-sh/cpu-sh3/timer.h
+++ b/arch/sh/include/cpu-sh3/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh3/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h
index 4e6381d5ff7..4e6381d5ff7 100644
--- a/include/asm-sh/cpu-sh3/ubc.h
+++ b/arch/sh/include/cpu-sh3/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h
index 4ee0347298d..4ee0347298d 100644
--- a/include/asm-sh/cpu-sh3/watchdog.h
+++ b/arch/sh/include/cpu-sh3/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
index a3fa733c1c7..a3fa733c1c7 100644
--- a/include/asm-sh/cpu-sh4/addrspace.h
+++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh4/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
index 1c61ebf5c8e..1c61ebf5c8e 100644
--- a/include/asm-sh/cpu-sh4/cache.h
+++ b/arch/sh/include/cpu-sh4/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
index 065306d376e..065306d376e 100644
--- a/include/asm-sh/cpu-sh4/cacheflush.h
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
index 71b426a6e48..71b426a6e48 100644
--- a/include/asm-sh/cpu-sh4/dma-sh7780.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
diff --git a/include/asm-sh/cpu-sh4/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
index aaf71b018c2..235b7cd1fc9 100644
--- a/include/asm-sh/cpu-sh4/dma.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -20,7 +20,7 @@
 #define CHCR_TS_MASK	0x18
 #define CHCR_TS_SHIFT	3
 
-#include <asm/cpu/dma-sh7780.h>
+#include <cpu/dma-sh7780.h>
 #else
 #define SH_DMAC_BASE	0xffa00000
 
diff --git a/include/asm-sh/cpu-sh4/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h
index febef734252..febef734252 100644
--- a/include/asm-sh/cpu-sh4/fpu.h
+++ b/arch/sh/include/cpu-sh4/cpu/fpu.h
diff --git a/include/asm-sh/cpu-sh4/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
index c23af81c2e7..c23af81c2e7 100644
--- a/include/asm-sh/cpu-sh4/freq.h
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
index 9ea8eb27b18..9ea8eb27b18 100644
--- a/include/asm-sh/cpu-sh4/mmu_context.h
+++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh4/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h
index 25b1e6adfe8..25b1e6adfe8 100644
--- a/include/asm-sh/cpu-sh4/rtc.h
+++ b/arch/sh/include/cpu-sh4/cpu/rtc.h
diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
index ab392f120e0..ab392f120e0 100644
--- a/include/asm-sh/cpu-sh4/sigcontext.h
+++ b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
diff --git a/include/asm-sh/cpu-sh4/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
index 586d6491816..586d6491816 100644
--- a/include/asm-sh/cpu-sh4/sq.h
+++ b/arch/sh/include/cpu-sh4/cpu/sq.h
diff --git a/include/asm-sh/cpu-sh4/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h
index d1e796b9688..d1e796b9688 100644
--- a/include/asm-sh/cpu-sh4/timer.h
+++ b/arch/sh/include/cpu-sh4/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh4/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h
index c86e1705093..c86e1705093 100644
--- a/include/asm-sh/cpu-sh4/ubc.h
+++ b/arch/sh/include/cpu-sh4/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh4/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
index 259f6a0ce23..259f6a0ce23 100644
--- a/include/asm-sh/cpu-sh4/watchdog.h
+++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh5/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h
index dc36b9a03af..dc36b9a03af 100644
--- a/include/asm-sh/cpu-sh5/addrspace.h
+++ b/arch/sh/include/cpu-sh5/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh5/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h
index ed050ab526f..ed050ab526f 100644
--- a/include/asm-sh/cpu-sh5/cache.h
+++ b/arch/sh/include/cpu-sh5/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
index 5a11f0b7e66..5a11f0b7e66 100644
--- a/include/asm-sh/cpu-sh5/cacheflush.h
+++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
diff --git a/include/asm-sh/cpu-sh5/dma.h b/arch/sh/include/cpu-sh5/cpu/dma.h
index 7bf6bb3d35e..7bf6bb3d35e 100644
--- a/include/asm-sh/cpu-sh5/dma.h
+++ b/arch/sh/include/cpu-sh5/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh5/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h
index f0f0756e6e8..f0f0756e6e8 100644
--- a/include/asm-sh/cpu-sh5/irq.h
+++ b/arch/sh/include/cpu-sh5/cpu/irq.h
diff --git a/include/asm-sh/cpu-sh5/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
index 68a1d2cff45..68a1d2cff45 100644
--- a/include/asm-sh/cpu-sh5/mmu_context.h
+++ b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh5/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h
index 6664ea6f156..6664ea6f156 100644
--- a/include/asm-sh/cpu-sh5/registers.h
+++ b/arch/sh/include/cpu-sh5/cpu/registers.h
diff --git a/include/asm-sh/cpu-sh5/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h
index 12ea0ed144e..12ea0ed144e 100644
--- a/include/asm-sh/cpu-sh5/rtc.h
+++ b/arch/sh/include/cpu-sh5/cpu/rtc.h
diff --git a/include/asm-sh/dreamcast/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h
index ddd68e78870..ddd68e78870 100644
--- a/include/asm-sh/dreamcast/dma.h
+++ b/arch/sh/include/mach-dreamcast/mach/dma.h
diff --git a/include/asm-sh/dreamcast/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h
index 51f6a87f1f1..51f6a87f1f1 100644
--- a/include/asm-sh/dreamcast/maple.h
+++ b/arch/sh/include/mach-dreamcast/mach/maple.h
diff --git a/include/asm-sh/dreamcast/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
index e401b24b0d8..75fc9009e09 100644
--- a/include/asm-sh/dreamcast/pci.h
+++ b/arch/sh/include/mach-dreamcast/mach/pci.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_SH_DREAMCAST_PCI_H
 #define __ASM_SH_DREAMCAST_PCI_H
 
-#include <asm/mach/sysasic.h>
+#include <mach-dreamcast/mach/sysasic.h>
 
 #define	GAPSPCI_REGS		0x01001400
 #define GAPSPCI_DMA_BASE	0x01840000
diff --git a/include/asm-sh/dreamcast/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
index f33426608a8..f33426608a8 100644
--- a/include/asm-sh/dreamcast/sysasic.h
+++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h
diff --git a/include/asm-sh/landisk/gio.h b/arch/sh/include/mach-landisk/mach/gio.h
index 35d7368b718..35d7368b718 100644
--- a/include/asm-sh/landisk/gio.h
+++ b/arch/sh/include/mach-landisk/mach/gio.h
diff --git a/include/asm-sh/landisk/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
index 6fb04ab38b9..6fb04ab38b9 100644
--- a/include/asm-sh/landisk/iodata_landisk.h
+++ b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
diff --git a/include/asm-sh/se.h b/arch/sh/include/mach-se/mach/se.h
index eb23000e1bb..eb23000e1bb 100644
--- a/include/asm-sh/se.h
+++ b/arch/sh/include/mach-se/mach/se.h
diff --git a/include/asm-sh/se7206.h b/arch/sh/include/mach-se/mach/se7206.h
index 698eb80389a..698eb80389a 100644
--- a/include/asm-sh/se7206.h
+++ b/arch/sh/include/mach-se/mach/se7206.h
diff --git a/include/asm-sh/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
index 98458460e63..98458460e63 100644
--- a/include/asm-sh/se7343.h
+++ b/arch/sh/include/mach-se/mach/se7343.h
diff --git a/include/asm-sh/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
index b957f604119..b957f604119 100644
--- a/include/asm-sh/se7721.h
+++ b/arch/sh/include/mach-se/mach/se7721.h
diff --git a/include/asm-sh/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
index e971d9a82f4..e971d9a82f4 100644
--- a/include/asm-sh/se7722.h
+++ b/arch/sh/include/mach-se/mach/se7722.h
diff --git a/include/asm-sh/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
index b36792ac5d6..b36792ac5d6 100644
--- a/include/asm-sh/se7751.h
+++ b/arch/sh/include/mach-se/mach/se7751.h
diff --git a/include/asm-sh/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
index 40e9b41458c..40e9b41458c 100644
--- a/include/asm-sh/se7780.h
+++ b/arch/sh/include/mach-se/mach/se7780.h
diff --git a/include/asm-sh/sh03/io.h b/arch/sh/include/mach-sh03/mach/io.h
index c39c785bba9..c39c785bba9 100644
--- a/include/asm-sh/sh03/io.h
+++ b/arch/sh/include/mach-sh03/mach/io.h
diff --git a/include/asm-sh/sh03/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h
index 19c40b80428..19c40b80428 100644
--- a/include/asm-sh/sh03/sh03.h
+++ b/arch/sh/include/mach-sh03/mach/sh03.h
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/sh/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index d3d9f320423..bea40339919 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -80,11 +80,11 @@ static int __init cf_init_default(void)
 }
 
 #if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 #endif
 
 /*
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 79baa47af97..726f0335da7 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/bitops.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/page.h>
 
 /*
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index ee894e5a45e..becc54c4569 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
 #include <asm/page.h>
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
index 47096dc3d20..ab3903eeda5 100644
--- a/arch/sh/kernel/cpu/sh2a/entry.S
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
 #include <asm/page.h>
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 4004073f98c..3fe482dd05c 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -14,7 +14,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/unistd.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/page.h>
 
 ! NOTE:
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 8020796139f..2d452f67fb8 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -13,7 +13,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/io.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/fpu.h>
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
index 7b2d337ee41..828cb57cb95 100644
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ b/arch/sh/kernel/cpu/sh4/softfloat.c
@@ -36,7 +36,7 @@
  * and Kamel Khelifi <kamel.khelifi@st.com>
  */
 #include <linux/kernel.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 
 #define LIT64( a ) a##LL
 
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 9561b02ade0..8a8a993f55e 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -22,7 +22,7 @@
 #include <linux/io.h>
 #include <asm/page.h>
 #include <asm/cacheflush.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
 
 struct sq_mapping;
 
@@ -199,7 +199,7 @@ EXPORT_SYMBOL(sq_remap);
 
 /**
  * sq_unmap - Unmap a Store Queue allocation
- * @map: Pre-allocated Store Queue mapping.
+ * @vaddr: Pre-allocated Store Queue mapping.
  *
  * Unmaps the store queue allocation @map that was previously created by
  * sq_remap(). Also frees up the pte that was previously inserted into
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index cd6baffdc89..a7412cede53 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -45,7 +45,7 @@ static struct platform_device vpu_device = {
 };
 
 static struct uio_info veu0_platform_data = {
-	.name = "VEU",
+	.name = "VEU2H",
 	.version = "0",
 	.irq = 54,
 };
@@ -73,7 +73,7 @@ static struct platform_device veu0_device = {
 };
 
 static struct uio_info veu1_platform_data = {
-	.name = "VEU",
+	.name = "VEU2H",
 	.version = "0",
 	.irq = 27,
 };
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 05372ed6c56..e640c63d581 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -2,7 +2,7 @@
  * arch/sh/kernel/cpu/sh5/entry.S
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2004 - 2007  Paul Mundt
+ * Copyright (C) 2004 - 2008  Paul Mundt
  * Copyright (C) 2003, 2004  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -11,7 +11,7 @@
  */
 #include <linux/errno.h>
 #include <linux/sys.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 #include <asm/processor.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
@@ -923,6 +923,8 @@ ret_from_exception:
 	blink   tr0, ZERO
 
 resume_kernel:
+	CLI()
+
 	pta	restore_all, tr0
 
 	getcon	KCR0, r6
@@ -939,19 +941,11 @@ need_resched:
 	andi	r7, 0xf0, r7
 	bne	r7, ZERO, tr0
 
-	movi	((PREEMPT_ACTIVE >> 16) & 65535), r8
-	shori	(PREEMPT_ACTIVE & 65535), r8
-	st.l	r6, TI_PRE_COUNT, r8
-
-	STI()
-	movi	schedule, r7
+	movi	preempt_schedule_irq, r7
 	ori	r7, 1, r7
 	ptabs	r7, tr1
 	blink	tr1, LINK
 
-	st.l	r6, TI_PRE_COUNT, ZERO
-	CLI()
-
 	pta	need_resched, tr1
 	blink	tr1, ZERO
 #endif
@@ -987,11 +981,11 @@ work_resched:
 work_notifysig:
 	gettr	tr1, LINK
 
-	movi	do_signal, r6
+	movi	do_notify_resume, r6
 	ptabs	r6, tr0
 	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3
-	blink	tr0, LINK	    /* Call do_signal(regs, 0), return here */
+	or	r7, ZERO, r3
+	blink	tr0, LINK	    /* Call do_notify_resume(regs, current_thread_info->flags), return here */
 
 restore_all:
 	/* Do prefetches */
@@ -1300,18 +1294,20 @@ syscall_allowed:
 
 	getcon	KCR0, r2
 	ld.l	r2, TI_FLAGS, r4
-	movi	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT), r6
+	movi	_TIF_WORK_SYSCALL_MASK, r6
 	and	r6, r4, r6
 	beq/l	r6, ZERO, tr0
 
 	/* Trace it by calling syscall_trace before and after */
-	movi	syscall_trace, r4
+	movi	do_syscall_trace_enter, r4
 	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3
 	ptabs	r4, tr0
 	blink	tr0, LINK
 
-	/* Reload syscall number as r5 is trashed by syscall_trace */
+	/* Save the retval */
+	st.q	SP, FRAME_R(2), r2
+
+	/* Reload syscall number as r5 is trashed by do_syscall_trace_enter */
 	ld.q	SP, FRAME_S(FSYSCALL_ID), r5
 	andi	r5, 0x1ff, r5
 
@@ -1343,9 +1339,8 @@ syscall_ret_trace:
 	/* We get back here only if under trace */
 	st.q	SP, FRAME_R(9), r2	/* Save return value */
 
-	movi	syscall_trace, LINK
+	movi	do_syscall_trace_leave, LINK
 	or	SP, ZERO, r2
-	movi	1, r3
 	ptabs	LINK, tr0
 	blink	tr0, LINK
 
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 5e0dd193384..efbb4268875 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -92,6 +92,7 @@ ENTRY(ret_from_irq)
 	bra	resume_userspace
 	 nop
 ENTRY(resume_kernel)
+	cli
 	mov.l	@(TI_PRE_COUNT,r8), r0	! current_thread_info->preempt_count
 	tst	r0, r0
 	bf	noresched
@@ -105,28 +106,9 @@ need_resched:
 	and	#0xf0, r0		! interrupts off (exception path)?
 	cmp/eq	#0xf0, r0
 	bt	noresched
-
-	mov.l	1f, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
 	mov.l	3f, r0
-	jsr	@r0
-	 nop
-#endif
-	sti
-	mov.l	2f, r0
-	jsr	@r0
-	 nop
-	mov	#0, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	4f, r0
-	jsr	@r0
+	jsr	@r0			! call preempt_schedule_irq
 	 nop
-#endif
-
 	bra	need_resched
 	 nop
 
@@ -137,10 +119,7 @@ noresched:
 	.align 2
 1:	.long	PREEMPT_ACTIVE
 2:	.long	schedule
-#ifdef CONFIG_TRACE_IRQFLAGS
-3:	.long	trace_hardirqs_on
-4:	.long	trace_hardirqs_off
-#endif
+3:	.long	preempt_schedule_irq
 #endif
 
 ENTRY(resume_userspace)
@@ -202,7 +181,7 @@ work_resched:
 syscall_exit_work:
 	! r0: current_thread_info->flags
 	! r8: current_thread_info
-	tst	#_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT, r0
+	tst	#_TIF_WORK_SYSCALL_MASK, r0
 	bt/s	work_pending
 	 tst	#_TIF_NEED_RESCHED, r0
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -211,10 +190,8 @@ syscall_exit_work:
 	 nop
 #endif
 	sti
-	! XXX setup arguments...
 	mov	r15, r4
-	mov	#1, r5
-	mov.l	4f, r0			! do_syscall_trace
+	mov.l	8f, r0			! do_syscall_trace_leave
 	jsr	@r0
 	 nop
 	bra	resume_userspace
@@ -223,12 +200,11 @@ syscall_exit_work:
 	.align	2
 syscall_trace_entry:
 	!                     	Yes it is traced.
-	! XXX setup arguments...
 	mov     r15, r4
-	mov     #0, r5
-	mov.l	4f, r11		! Call do_syscall_trace which notifies
+	mov.l	7f, r11		! Call do_syscall_trace_enter which notifies
 	jsr	@r11	    	! superior (will chomp R[0-7])
 	 nop
+	mov.l	r0, @(OFF_R0,r15)	! Save return value
 	!			Reload R0-R4 from kernel stack, where the
 	!   	    	    	parent may have modified them using
 	!   	    	    	ptrace(POKEUSR).  (Note that R0-R2 are
@@ -351,7 +327,7 @@ ENTRY(system_call)
 	!
 	get_current_thread_info r8, r10
 	mov.l	@(TI_FLAGS,r8), r8
-	mov	#(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT), r10
+	mov	#_TIF_WORK_SYSCALL_MASK, r10
 	tst	r10, r8
 	bf	syscall_trace_entry
 	!
@@ -389,8 +365,9 @@ syscall_exit:
 #endif
 2:	.long	NR_syscalls
 3:	.long	sys_call_table
-4:	.long	do_syscall_trace
 #ifdef CONFIG_TRACE_IRQFLAGS
 5:	.long	trace_hardirqs_on
 6:	.long	trace_hardirqs_off
 #endif
+7:	.long	do_syscall_trace_enter
+8:	.long	do_syscall_trace_leave
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index f42d4c0feb7..7ccfb995a39 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -11,8 +11,8 @@
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/tlb.h>
-#include <asm/cpu/registers.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/registers.h>
+#include <cpu/mmu_context.h>
 #include <asm/thread_info.h>
 
 /*
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index a2a99e487e3..64b7690c664 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -15,7 +15,7 @@
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 
 atomic_t irq_err_count;
 
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index ec1eadce4aa..94df56b0d1f 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -13,6 +13,7 @@
 #include <linux/kexec.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
+#include <linux/numa.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
@@ -101,6 +102,13 @@ void machine_kexec(struct kimage *image)
 
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+	(*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
 }
 
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_NUMA
+	VMCOREINFO_SYMBOL(node_data);
+	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
+#endif
+}
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index 5482e65375a..c43081039dd 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -27,6 +27,7 @@
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
+#include <linux/bug.h>
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
@@ -36,7 +37,8 @@ void *module_alloc(unsigned long size)
 {
 	if (size == 0)
 		return NULL;
-	return vmalloc(size);
+
+	return vmalloc_exec(size);
 }
 
 
@@ -145,9 +147,10 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 void module_arch_cleanup(struct module *mod)
 {
+	module_bug_cleanup(mod);
 }
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index 2bc72def5cf..035cb300d3d 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -20,6 +20,8 @@
 #include <linux/signal.h>
 #include <linux/io.h>
 #include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -57,7 +59,23 @@ static inline int put_stack_long(struct task_struct *task, int offset,
 	return 0;
 }
 
-static void ptrace_disable_singlestep(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	long pc;
+
+	pc = get_stack_long(child, (long)&regs->pc);
+
+	/* Next scheduling will set up UBC */
+	if (child->thread.ubc_pc == 0)
+		ubc_usercnt += 1;
+
+	child->thread.ubc_pc = pc;
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *child)
 {
 	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
 
@@ -81,7 +99,7 @@ static void ptrace_disable_singlestep(struct task_struct *child)
  */
 void ptrace_disable(struct task_struct *child)
 {
-	ptrace_disable_singlestep(child);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -90,12 +108,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		unsigned long tmp;
@@ -125,12 +137,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 		ret = -EIO;
 		if ((addr & 3) || addr < 0 ||
@@ -151,67 +157,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		ptrace_disable_singlestep(child);
-
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		ptrace_disable_singlestep(child);
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		long pc;
-		struct pt_regs *regs = NULL;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		if ((child->ptrace & PT_DTRACE) == 0) {
-			/* Spurious delayed TF traps may occur */
-			child->ptrace |= PT_DTRACE;
-		}
-
-		pc = get_stack_long(child, (long)&regs->pc);
-
-		/* Next scheduling will set up UBC */
-		if (child->thread.ubc_pc == 0)
-			ubc_usercnt += 1;
-		child->thread.ubc_pc = pc;
-
-		set_tsk_thread_flag(child, TIF_SINGLESTEP);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 #ifdef CONFIG_SH_DSP
 	case PTRACE_GETDSPREGS: {
 		unsigned long dp;
@@ -272,39 +217,49 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+static inline int audit_arch(void)
 {
-	struct task_struct *tsk = current;
+	int arch = EM_SH;
 
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
-				   regs->regs[0]);
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	arch |= __AUDIT_ARCH_LE;
+#endif
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    !test_thread_flag(TIF_SINGLESTEP))
-		goto out;
-	if (!(tsk->ptrace & PT_PTRACED))
-		goto out;
+	return arch;
+}
 
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) &&
-				 !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long ret = 0;
 
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (tsk->exit_code) {
-		send_sig(tsk->exit_code, tsk, 1);
-		tsk->exit_code = 0;
-	}
+	secure_computing(regs->regs[0]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1L;
 
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3],
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(audit_arch(), regs->regs[3],
 				    regs->regs[4], regs->regs[5],
 				    regs->regs[6], regs->regs[7]);
 
+	return ret ?: regs->regs[0];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
+				   regs->regs[0]);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index d453c47dc52..9c6424892bd 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -27,6 +27,8 @@
 #include <linux/signal.h>
 #include <linux/syscalls.h>
 #include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -120,18 +122,25 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
 	return 0;
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = child->thread.uregs;
+
+	regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = child->thread.uregs;
+
+	regs->sr &= ~SR_SSTEP;
+}
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		unsigned long tmp;
@@ -154,12 +163,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR:
                 /* write the word at location addr in the USER area. We must
                    disallow any changes to certain SR bits or u_fpvalid, since
@@ -191,58 +194,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		struct pt_regs *regs;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		if ((child->ptrace & PT_DTRACE) == 0) {
-			/* Spurious delayed TF traps may occur */
-			child->ptrace |= PT_DTRACE;
-		}
-
-		regs = child->thread.uregs;
-
-		regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
-
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -273,38 +224,51 @@ asmlinkage int sh64_ptrace(long request, long pid, long addr, long data)
 	return sys_ptrace(request, pid, addr, data);
 }
 
-asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit)
+static inline int audit_arch(void)
 {
-	struct task_struct *tsk = current;
+	int arch = EM_SH;
 
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
-				   regs->regs[9]);
+#ifdef CONFIG_64BIT
+	arch |= __AUDIT_ARCH_64BIT;
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	arch |= __AUDIT_ARCH_LE;
+#endif
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    !test_thread_flag(TIF_SINGLESTEP))
-		goto out;
-	if (!(tsk->ptrace & PT_PTRACED))
-		goto out;
-
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) &&
-				!test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (tsk->exit_code) {
-		send_sig(tsk->exit_code, tsk, 1);
-		tsk->exit_code = 0;
-	}
+	return arch;
+}
+
+asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long long ret = 0;
 
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[1],
+	secure_computing(regs->regs[9]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1LL;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(audit_arch(), regs->regs[1],
 				    regs->regs[2], regs->regs[3],
 				    regs->regs[4], regs->regs[5]);
+
+	return ret ?: regs->regs[9];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
+				   regs->regs[9]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, 0);
 }
 
 /* Called with interrupts disabled */
@@ -338,5 +302,5 @@ asmlinkage void do_software_break_point(unsigned long long vec,
  */
 void ptrace_disable(struct task_struct *child)
 {
-        /* nothing to do.. */
+	user_disable_single_step(child);
 }
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 6339d0c9571..de832056bf1 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 #include <linux/err.h>
 #include <linux/debugfs.h>
+#include <linux/crash_dump.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -170,6 +171,7 @@ static void __init reserve_crashkernel(void)
 				(unsigned long)(free_mem >> 20));
 		crashk_res.start = crash_base;
 		crashk_res.end   = crash_base + crash_size - 1;
+		insert_resource(&iomem_resource, &crashk_res);
 	}
 }
 #else
@@ -203,11 +205,6 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 	request_resource(res, &data_resource);
 	request_resource(res, &bss_resource);
 
-#ifdef CONFIG_KEXEC
-	if (crashk_res.start != crashk_res.end)
-		request_resource(res, &crashk_res);
-#endif
-
 	add_active_range(nid, start_pfn, end_pfn);
 }
 
@@ -286,6 +283,25 @@ static void __init setup_memory(void)
 extern void __init setup_memory(void);
 #endif
 
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+#ifdef CONFIG_CRASH_DUMP
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+static int __init parse_elfcorehdr(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+	elfcorehdr_addr = memparse(arg, &arg);
+	return 0;
+}
+early_param("elfcorehdr", parse_elfcorehdr);
+#endif
+
 void __init setup_arch(char **cmdline_p)
 {
 	enable_mmu();
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 8f916536719..6e1b1c27165 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -107,10 +107,12 @@ DECLARE_EXPORT(__movmemSI12_i4);
  * GCC >= 4.2 emits these for division, as do GCC 4.1.x versions of the ST
  * compiler which include backported patches.
  */
-DECLARE_EXPORT(__sdivsi3_i4i);
 DECLARE_EXPORT(__udiv_qrnnd_16);
+#if !defined(CONFIG_CPU_SH2)
+DECLARE_EXPORT(__sdivsi3_i4i);
 DECLARE_EXPORT(__udivsi3_i4i);
 #endif
+#endif
 #else /* GCC 3.x */
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 4bbbde895a5..51689d29ad4 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -24,6 +24,7 @@
 #include <linux/binfmts.h>
 #include <linux/freezer.h>
 #include <linux/io.h>
+#include <linux/tracehook.h>
 #include <asm/system.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
@@ -507,14 +508,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 		switch (regs->regs[0]) {
 			case -ERESTART_RESTARTBLOCK:
 			case -ERESTARTNOHAND:
+			no_system_call_restart:
 				regs->regs[0] = -EINTR;
 				break;
 
 			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->regs[0] = -EINTR;
-					break;
-				}
+				if (!(ka->sa.sa_flags & SA_RESTART))
+					goto no_system_call_restart;
 			/* fallthrough */
 			case -ERESTARTNOINTR:
 				regs->regs[0] = save_r0;
@@ -589,12 +589,15 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 			 * clear the TIF_RESTORE_SIGMASK flag */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, regs,
+					test_thread_flag(TIF_SINGLESTEP));
 		}
 
 		return;
 	}
 
- no_signal:
+no_signal:
 	/* Did we come from a system call? */
 	if (regs->tra >= 0) {
 		/* Restart the system call - no handlers present */
@@ -618,9 +621,14 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 }
 
 asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
-				 __u32 thread_info_flags)
+				 unsigned long thread_info_flags)
 {
 	/* deal with pending signal delivery */
-	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs, save_r0);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 552eb810cd8..1d62dfef77f 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -22,6 +22,7 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/stddef.h>
+#include <linux/tracehook.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -42,7 +43,84 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static int do_signal(struct pt_regs *regs, sigset_t *oldset)
+{
+	siginfo_t info;
+	int signr;
+	struct k_sigaction ka;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return 1;
+
+	if (try_to_freeze())
+		goto no_signal;
+
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else if (!oldset)
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, 0);
+
+	if (signr > 0) {
+		/* Whee!  Actually deliver the signal.  */
+		handle_signal(signr, &info, &ka, oldset, regs);
+
+		/*
+		 * If a signal was successfully delivered, the saved sigmask
+		 * is in its frame, and we can clear the TIF_RESTORE_SIGMASK
+		 * flag.
+		 */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
+		return 1;
+	}
+
+no_signal:
+	/* Did we come from a system call? */
+	if (regs->syscall_nr >= 0) {
+		/* Restart the system call - no handlers present */
+		switch (regs->regs[REG_RET]) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			/* Decode Syscall # */
+			regs->regs[REG_RET] = regs->syscall_nr;
+			regs->pc -= 4;
+			break;
+
+		case -ERESTART_RESTARTBLOCK:
+			regs->regs[REG_RET] = __NR_restart_syscall;
+			regs->pc -= 4;
+			break;
+		}
+	}
+
+	/* No signal to deliver -- put the saved sigmask back */
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+
+	return 0;
+}
 
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
@@ -643,14 +721,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 		switch (regs->regs[REG_RET]) {
 			case -ERESTART_RESTARTBLOCK:
 			case -ERESTARTNOHAND:
+			no_system_call_restart:
 				regs->regs[REG_RET] = -EINTR;
 				break;
 
 			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->regs[REG_RET] = -EINTR;
-					break;
-				}
+				if (!(ka->sa.sa_flags & SA_RESTART))
+					goto no_system_call_restart;
 			/* fallthrough */
 			case -ERESTARTNOINTR:
 				/* Decode syscall # */
@@ -673,80 +750,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	spin_unlock_irq(&current->sighand->siglock);
 }
 
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
-	siginfo_t info;
-	int signr;
-	struct k_sigaction ka;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return 1;
-
-	if (try_to_freeze())
-		goto no_signal;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else if (!oldset)
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, 0);
-
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &info, &ka, oldset, regs);
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal(regs, 0);
 
-		/*
-		 * If a signal was successfully delivered, the saved sigmask
-		 * is in its frame, and we can clear the TIF_RESTORE_SIGMASK
-		 * flag.
-		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
-
-		return 1;
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
 	}
-
-no_signal:
-	/* Did we come from a system call? */
-	if (regs->syscall_nr >= 0) {
-		/* Restart the system call - no handlers present */
-		switch (regs->regs[REG_RET]) {
-		case -ERESTARTNOHAND:
-		case -ERESTARTSYS:
-		case -ERESTARTNOINTR:
-			/* Decode Syscall # */
-			regs->regs[REG_RET] = regs->syscall_nr;
-			regs->pc -= 4;
-			break;
-
-		case -ERESTART_RESTARTBLOCK:
-			regs->regs[REG_RET] = __NR_restart_syscall;
-			regs->pc -= 4;
-			break;
-		}
-	}
-
-	/* No signal to deliver -- put the saved sigmask back */
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-
-	return 0;
 }
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 59cd2859ce9..9061b86d73f 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -170,7 +170,7 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 	version = call >> 16; /* hack for backward compatibility */
 	call &= 0xffff;
 
-	if (call <= SEMCTL)
+	if (call <= SEMTIMEDOP)
 		switch (call) {
 		case SEMOP:
 			return sys_semtimedop(first,
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
index 022a55f1c1d..791edabf7d8 100644
--- a/arch/sh/kernel/time_64.c
+++ b/arch/sh/kernel/time_64.c
@@ -33,8 +33,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-#include <asm/cpu/registers.h>	 /* required by inline __asm__ stmt. */
-#include <asm/cpu/irq.h>
+#include <cpu/registers.h>	 /* required by inline __asm__ stmt. */
+#include <cpu/irq.h>
 #include <asm/addrspace.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c
index ff559e2a96f..da32ba7b5fc 100644
--- a/arch/sh/lib64/panic.c
+++ b/arch/sh/lib64/panic.c
@@ -8,7 +8,7 @@
 
 #include <linux/kernel.h>
 #include <asm/io.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* THIS IS A PHYSICAL ADDRESS */
 #define HDSP2534_ADDR (0x04002100)
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 56d0a7daa34..8a03926ea84 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -181,10 +181,12 @@ config ENTRY_OFFSET
 choice
 	prompt "HugeTLB page size"
 	depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+	default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
 	default HUGETLB_PAGE_SIZE_64K
 
 config HUGETLB_PAGE_SIZE_64K
 	bool "64kB"
+	depends on !PAGE_SIZE_64KB
 
 config HUGETLB_PAGE_SIZE_256K
 	bool "256kB"
@@ -237,7 +239,6 @@ choice
 
 config CACHE_WRITEBACK
 	bool "Write-back"
-	depends on CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5
 
 config CACHE_WRITETHROUGH
 	bool "Write-through"
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index e295db60b91..70e0906023c 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -5,12 +5,15 @@
 obj-y			:= init.o extable_32.o consistent.o
 
 ifndef CONFIG_CACHE_OFF
-obj-$(CONFIG_CPU_SH2)		+= cache-sh2.o
-obj-$(CONFIG_CPU_SH3)		+= cache-sh3.o
-obj-$(CONFIG_CPU_SH4)		+= cache-sh4.o
-obj-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
+cache-$(CONFIG_CPU_SH2)		:= cache-sh2.o
+cache-$(CONFIG_CPU_SH2A)	:= cache-sh2a.o
+cache-$(CONFIG_CPU_SH3)		:= cache-sh3.o
+cache-$(CONFIG_CPU_SH4)		:= cache-sh4.o
+cache-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 endif
 
+obj-y			+= $(cache-y)
+
 mmu-y			:= tlb-nommu.o pg-nommu.o
 mmu-$(CONFIG_MMU)	:= fault_32.o tlbflush_32.o ioremap_32.o
 
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index 6614033f6be..c4e80d2b764 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -2,6 +2,7 @@
  * arch/sh/mm/cache-sh2.c
  *
  * Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2008 Yoshinori Sato
  *
  * Released under the terms of the GNU GPL v2.0.
  */
@@ -24,8 +25,15 @@ void __flush_wback_region(void *start, int size)
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
 	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		/* FIXME cache purge */
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
+		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
+		int way;
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(addr | (way << 12));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, addr | (way << 12));
+			}
+		}
 	}
 }
 
@@ -37,21 +45,40 @@ void __flush_purge_region(void *start, int size)
 	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
-	}
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES)
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
 }
 
 void __flush_invalidate_region(void *start, int size)
 {
+#ifdef CONFIG_CACHE_WRITEBACK
+	/*
+	 * SH-2 does not support individual line invalidation, only a
+	 * global invalidate.
+	 */
+	unsigned long ccr;
+	unsigned long flags;
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	ccr = ctrl_inl(CCR);
+	ccr |= CCR_CACHE_INVALIDATE;
+	ctrl_outl(ccr, CCR);
+
+	back_to_cached();
+	local_irq_restore(flags);
+#else
 	unsigned long v;
 	unsigned long begin, end;
 
 	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
-	}
-}
 
+	for (v = begin; v < end; v+=L1_CACHE_BYTES)
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
+#endif
+}
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
new file mode 100644
index 00000000000..62c0c5f3512
--- /dev/null
+++ b/arch/sh/mm/cache-sh2a.c
@@ -0,0 +1,129 @@
+/*
+ * arch/sh/mm/cache-sh2a.c
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+void __flush_wback_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0);
+		int way;
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(addr | (way << 11));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, addr | (way << 11));
+			}
+		}
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+void __flush_purge_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+void __flush_invalidate_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	local_irq_save(flags);
+	jump_to_uncached();
+
+#ifdef CONFIG_CACHE_WRITEBACK
+	ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+	/* I-cache invalidate */
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+#else
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+#endif
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+/* WBack O-Cache and flush I-Cache */
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+	unsigned long v;
+	unsigned long flags;
+
+	start = start & ~(L1_CACHE_BYTES-1);
+	end = (end + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = start; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long addr = (v & 0x000007f0);
+		int way;
+		/* O-Cache writeback */
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+			}
+		}
+		/* I-Cache invalidate */
+		ctrl_outl(addr,
+			  CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008);
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index b2ce014401b..64b8f7f96f9 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -95,8 +95,31 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 }
 EXPORT_SYMBOL(dma_cache_sync);
 
-int platform_resource_setup_memory(struct platform_device *pdev,
-				   char *name, unsigned long memsize)
+static int __init memchunk_setup(char *str)
+{
+	return 1; /* accept anything that begins with "memchunk." */
+}
+__setup("memchunk.", memchunk_setup);
+
+static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
+{
+	char *p = boot_command_line;
+	int k = strlen(name);
+
+	while ((p = strstr(p, "memchunk."))) {
+		p += 9; /* strlen("memchunk.") */
+		if (!strncmp(name, p, k) && p[k] == '=') {
+			p += k + 1;
+			*sizep = memparse(p, NULL);
+			pr_info("%s: forcing memory chunk size to 0x%08lx\n",
+				name, *sizep);
+			break;
+		}
+	}
+}
+
+int __init platform_resource_setup_memory(struct platform_device *pdev,
+					  char *name, unsigned long memsize)
 {
 	struct resource *r;
 	dma_addr_t dma_handle;
@@ -109,6 +132,10 @@ int platform_resource_setup_memory(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
+	memchunk_cmdline_override(name, &memsize);
+	if (!memsize)
+		return 0;
+
 	buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
 	if (!buf) {
 		pr_warning("%s: unable to allocate memory\n", name);
diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c
index 399d53710d2..bd63b961b2a 100644
--- a/arch/sh/mm/fault_64.c
+++ b/arch/sh/mm/fault_64.c
@@ -39,7 +39,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* Callable from fault.c, so not static */
 inline void __do_tlb_refill(unsigned long address,
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
index f34274a1ded..dae131243bc 100644
--- a/arch/sh/mm/tlb-sh5.c
+++ b/arch/sh/mm/tlb-sh5.c
@@ -15,9 +15,7 @@
 #include <asm/mmu_context.h>
 
 /**
- * sh64_tlb_init
- *
- * Perform initial setup for the DTLB and ITLB.
+ * sh64_tlb_init - Perform initial setup for the DTLB and ITLB.
  */
 int __init sh64_tlb_init(void)
 {
@@ -46,9 +44,7 @@ int __init sh64_tlb_init(void)
 }
 
 /**
- * sh64_next_free_dtlb_entry
- *
- * Find the next available DTLB entry
+ * sh64_next_free_dtlb_entry - Find the next available DTLB entry
  */
 unsigned long long sh64_next_free_dtlb_entry(void)
 {
@@ -56,9 +52,7 @@ unsigned long long sh64_next_free_dtlb_entry(void)
 }
 
 /**
- * sh64_get_wired_dtlb_entry
- *
- * Allocate a wired (locked-in) entry in the DTLB
+ * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB
  */
 unsigned long long sh64_get_wired_dtlb_entry(void)
 {
@@ -71,12 +65,10 @@ unsigned long long sh64_get_wired_dtlb_entry(void)
 }
 
 /**
- * sh64_put_wired_dtlb_entry
+ * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB.
  *
  * @entry:	Address of TLB slot.
  *
- * Free a wired (locked-in) entry in the DTLB.
- *
  * Works like a stack, last one to allocate must be first one to free.
  */
 int sh64_put_wired_dtlb_entry(unsigned long long entry)
@@ -115,7 +107,7 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry)
 }
 
 /**
- * sh64_setup_tlb_slot
+ * sh64_setup_tlb_slot - Load up a translation in a wired slot.
  *
  * @config_addr:	Address of TLB slot.
  * @eaddr:		Virtual address.
@@ -154,7 +146,7 @@ inline void sh64_setup_tlb_slot(unsigned long long config_addr,
 }
 
 /**
- * sh64_teardown_tlb_slot
+ * sh64_teardown_tlb_slot - Teardown a translation.
  *
  * @config_addr:	Address of TLB slot.
  *
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index 6668e6037af..9592889a6fd 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -52,20 +52,24 @@ endif
 export INIT_Y CORE_Y DRIVERS_Y NET_Y LIBS_Y HEAD_Y kallsyms.o
 
 # Default target
-all: image
+all: zImage
 
 boot := arch/sparc/boot
 
-image tftpboot.img: vmlinux
+image zImage tftpboot.img: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
+# This is the image used for packaging
+KBUILD_IMAGE := $(boot)/zImage
+
 CLEAN_FILES += arch/$(ARCH)/boot/System.map
 
 # Don't use tabs in echo arguments.
 define archhelp
   echo  '* image        - kernel image ($(boot)/image)'
+  echo  '* zImage       - stripped kernel image ($(boot)/zImage)'
   echo  '  tftpboot.img - image prepared for tftp'
 endef
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 22d331e1e94..3e77a9f5224 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -19,6 +19,9 @@ quiet_cmd_sysmap        = SYSMAP  $(obj)/System.map
       cmd_sysmap        = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
 quiet_cmd_image = LD      $@
       cmd_image = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDFLAGS_$(@F)) -o $@
+quiet_cmd_strip = STRIP   $@
+      cmd_strip = $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $(obj)/image -o $@
+
 
 define rule_image
 	$(if $($(quiet)cmd_image),               \
@@ -49,6 +52,9 @@ LDFLAGS_image := -T arch/sparc/kernel/vmlinux.lds $(BTOBJS) \
 $(obj)/image: $(obj)/btfix.o FORCE
 	$(call if_changed_rule,image)
 
+$(obj)/zImage: $(obj)/image
+	$(call if_changed,strip)
+
 $(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
diff --git a/arch/sparc/include/asm/ebus_32.h b/arch/sparc/include/asm/ebus_32.h
index 29cb7dfc6b7..f91f0b267ce 100644
--- a/arch/sparc/include/asm/ebus_32.h
+++ b/arch/sparc/include/asm/ebus_32.h
@@ -12,9 +12,9 @@
 #ifndef _LINUX_IOPORT_H
 #include <linux/ioport.h>
 #endif
+#include <linux/of_device.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 struct linux_ebus_child {
 	struct linux_ebus_child		*next;
diff --git a/arch/sparc/include/asm/ebus_64.h b/arch/sparc/include/asm/ebus_64.h
index fcc62b97ced..14c6a111f60 100644
--- a/arch/sparc/include/asm/ebus_64.h
+++ b/arch/sparc/include/asm/ebus_64.h
@@ -8,9 +8,10 @@
 #ifndef __SPARC64_EBUS_H
 #define __SPARC64_EBUS_H
 
+#include <linux/of_device.h>
+
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 struct linux_ebus_child {
 	struct linux_ebus_child		*next;
diff --git a/arch/sparc/include/asm/futex_64.h b/arch/sparc/include/asm/futex_64.h
index d8378935ae9..47f95839dc6 100644
--- a/arch/sparc/include/asm/futex_64.h
+++ b/arch/sparc/include/asm/futex_64.h
@@ -59,7 +59,7 @@ static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
 		__futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		__futex_cas_op("andn\t%2, %4, %1", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_XOR:
 		__futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
index 0bb9bf53174..e3dd9303643 100644
--- a/arch/sparc/include/asm/irq_64.h
+++ b/arch/sparc/include/asm/irq_64.h
@@ -90,4 +90,11 @@ static inline unsigned long get_softint(void)
 	return retval;
 }
 
+void __trigger_all_cpu_backtrace(void);
+#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+
+extern void *hardirq_stack[NR_CPUS];
+extern void *softirq_stack[NR_CPUS];
+#define __ARCH_HAS_DO_SOFTIRQ
+
 #endif
diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h
index e5f5aedc229..bba777a416d 100644
--- a/arch/sparc/include/asm/of_device.h
+++ b/arch/sparc/include/asm/of_device.h
@@ -30,8 +30,7 @@ struct of_device
 extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
 extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
 
-/* These are just here during the transition */
-#include <linux/of_device.h>
+/* This is just here during the transition */
 #include <linux/of_platform.h>
 
 #endif /* __KERNEL__ */
diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h
index aa699775ffb..2348ab90a57 100644
--- a/arch/sparc/include/asm/of_platform.h
+++ b/arch/sparc/include/asm/of_platform.h
@@ -1,8 +1,21 @@
 #ifndef ___ASM_SPARC_OF_PLATFORM_H
 #define ___ASM_SPARC_OF_PLATFORM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/of_platform_64.h>
-#else
-#include <asm/of_platform_32.h>
-#endif
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *			 <benh@kernel.crashing.org>
+ *    Modified for Sparc by merging parts of asm/of_device.h
+ *		by Stephen Rothwell
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+extern struct bus_type ebus_bus_type;
+extern struct bus_type sbus_bus_type;
+
+#define of_bus_type	of_platform_bus_type	/* for compatibility */
+
 #endif
diff --git a/arch/sparc/include/asm/of_platform_32.h b/arch/sparc/include/asm/of_platform_32.h
deleted file mode 100644
index 723f7c9b741..00000000000
--- a/arch/sparc/include/asm/of_platform_32.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _ASM_SPARC_OF_PLATFORM_H
-#define _ASM_SPARC_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *    Modified for Sparc by merging parts of asm/of_device.h
- *		by Stephen Rothwell
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-extern struct bus_type ebus_bus_type;
-extern struct bus_type sbus_bus_type;
-
-#define of_bus_type	of_platform_bus_type	/* for compatibility */
-
-#endif	/* _ASM_SPARC_OF_PLATFORM_H */
diff --git a/arch/sparc/include/asm/of_platform_64.h b/arch/sparc/include/asm/of_platform_64.h
deleted file mode 100644
index 4f66a5f6342..00000000000
--- a/arch/sparc/include/asm/of_platform_64.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_SPARC64_OF_PLATFORM_H
-#define _ASM_SPARC64_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *    Modified for Sparc by merging parts of asm/of_device.h
- *		by Stephen Rothwell
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-extern struct bus_type isa_bus_type;
-extern struct bus_type ebus_bus_type;
-extern struct bus_type sbus_bus_type;
-
-#define of_bus_type	of_platform_bus_type	/* for compatibility */
-
-#endif	/* _ASM_SPARC64_OF_PLATFORM_H */
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
index 7818b2523b8..d9830621c90 100644
--- a/arch/sparc/include/asm/parport.h
+++ b/arch/sparc/include/asm/parport.h
@@ -6,9 +6,10 @@
 #ifndef _ASM_SPARC64_PARPORT_H
 #define _ASM_SPARC64_PARPORT_H 1
 
+#include <linux/of_device.h>
+
 #include <asm/ebus.h>
 #include <asm/ns87303.h>
-#include <asm/of_device.h>
 #include <asm/prom.h>
 
 #define PARPORT_PC_MAX_PORTS	PARPORT_MAX
diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h
index d43c88b8683..d409c4f21a5 100644
--- a/arch/sparc/include/asm/ptrace_32.h
+++ b/arch/sparc/include/asm/ptrace_32.h
@@ -40,16 +40,6 @@ struct pt_regs {
 #define UREG_FP        UREG_I6
 #define UREG_RETPC     UREG_I7
 
-static inline bool pt_regs_is_syscall(struct pt_regs *regs)
-{
-	return (regs->psr & PSR_SYSCALL);
-}
-
-static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
-{
-	return (regs->psr &= ~PSR_SYSCALL);
-}
-
 /* A register window */
 struct reg_window {
 	unsigned long locals[8];
@@ -72,6 +62,16 @@ struct sparc_stackf {
 
 #ifdef __KERNEL__
 
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+	return (regs->psr & PSR_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+	return (regs->psr &= ~PSR_SYSCALL);
+}
+
 #define user_mode(regs) (!((regs)->psr & PSR_PS))
 #define instruction_pointer(regs) ((regs)->pc)
 #define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
index ec6d45c84cd..06e4914c13f 100644
--- a/arch/sparc/include/asm/ptrace_64.h
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -37,21 +37,6 @@ struct pt_regs {
 	unsigned int magic;
 };
 
-static inline int pt_regs_trap_type(struct pt_regs *regs)
-{
-	return regs->magic & 0x1ff;
-}
-
-static inline bool pt_regs_is_syscall(struct pt_regs *regs)
-{
-	return (regs->tstate & TSTATE_SYSCALL);
-}
-
-static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
-{
-	return (regs->tstate &= ~TSTATE_SYSCALL);
-}
-
 struct pt_regs32 {
 	unsigned int psr;
 	unsigned int pc;
@@ -128,15 +113,30 @@ struct sparc_trapf {
 
 #ifdef __KERNEL__
 
+static inline int pt_regs_trap_type(struct pt_regs *regs)
+{
+	return regs->magic & 0x1ff;
+}
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+	return (regs->tstate & TSTATE_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+	return (regs->tstate &= ~TSTATE_SYSCALL);
+}
+
 struct global_reg_snapshot {
 	unsigned long		tstate;
 	unsigned long		tpc;
 	unsigned long		tnpc;
 	unsigned long		o7;
 	unsigned long		i7;
+	unsigned long		rpc;
 	struct thread_info	*thread;
 	unsigned long		pad1;
-	unsigned long		pad2;
 };
 
 #define __ARCH_WANT_COMPAT_SYS_PTRACE
@@ -154,7 +154,6 @@ extern unsigned long profile_pc(struct pt_regs *);
 #define profile_pc(regs) instruction_pointer(regs)
 #endif
 extern void show_regs(struct pt_regs *);
-extern void __show_regs(struct pt_regs *);
 #endif
 
 #else /* __ASSEMBLY__ */
@@ -315,9 +314,9 @@ extern void __show_regs(struct pt_regs *);
 #define GR_SNAP_TNPC	0x10
 #define GR_SNAP_O7	0x18
 #define GR_SNAP_I7	0x20
-#define GR_SNAP_THREAD	0x28
-#define GR_SNAP_PAD1	0x30
-#define GR_SNAP_PAD2	0x38
+#define GR_SNAP_RPC	0x28
+#define GR_SNAP_THREAD	0x30
+#define GR_SNAP_PAD1	0x38
 
 #endif  /*  __KERNEL__  */
 
diff --git a/arch/sparc/include/asm/sbus_32.h b/arch/sparc/include/asm/sbus_32.h
index 77b5d3aadc9..a7b4fa21931 100644
--- a/arch/sparc/include/asm/sbus_32.h
+++ b/arch/sparc/include/asm/sbus_32.h
@@ -9,10 +9,10 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/ioport.h>
+#include <linux/of_device.h>
 
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/scatterlist.h>
 
 /* We scan which devices are on the SBus using the PROM node device
diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h
index 0e16b6dd7e9..b606c14343f 100644
--- a/arch/sparc/include/asm/sbus_64.h
+++ b/arch/sparc/include/asm/sbus_64.h
@@ -8,10 +8,10 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/ioport.h>
+#include <linux/of_device.h>
 
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/iommu.h>
 #include <asm/scatterlist.h>
 
diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h
index 7201752cf93..a8180e546a4 100644
--- a/arch/sparc/include/asm/smp_32.h
+++ b/arch/sparc/include/asm/smp_32.h
@@ -50,27 +50,24 @@ struct seq_file;
 void smp_bogo(struct seq_file *);
 void smp_info(struct seq_file *);
 
-BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, cpumask_t, unsigned long, unsigned long, unsigned long, unsigned long)
 BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
 BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
 BTFIXUPDEF_BLACKBOX(load_current)
 
-#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
+#define smp_cross_call(func,mask,arg1,arg2,arg3,arg4) BTFIXUP_CALL(smp_cross_call)(func,mask,arg1,arg2,arg3,arg4)
 
-static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
+static inline void xc0(smpfunc_t func) { smp_cross_call(func, cpu_online_map, 0, 0, 0, 0); }
 static inline void xc1(smpfunc_t func, unsigned long arg1)
-{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, 0, 0, 0); }
 static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
-{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, 0, 0); }
 static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 			   unsigned long arg3)
-{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, 0); }
 static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 			   unsigned long arg3, unsigned long arg4)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
-static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-			   unsigned long arg3, unsigned long arg4, unsigned long arg5)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, arg4); }
 
 static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
 {
@@ -78,6 +75,14 @@ static inline int smp_call_function(void (*func)(void *info), void *info, int wa
 	return 0;
 }
 
+static inline int smp_call_function_single(int cpuid, void (*func) (void *info),
+					   void *info, int wait)
+{
+	smp_cross_call((smpfunc_t)func, cpumask_of_cpu(cpuid),
+		       (unsigned long) info, 0, 0, 0);
+	return 0;
+}
+
 static inline int cpu_logical_map(int cpu)
 {
 	return cpu;
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 487960919f1..2a8a847764d 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -36,12 +36,12 @@
 #include <linux/pci.h>		/* struct pci_dev */
 #include <linux/proc_fs.h>
 #include <linux/scatterlist.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/vaddrs.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/sbus.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c
index cc4c235c4f5..f58c537446a 100644
--- a/arch/sparc/kernel/of_device.c
+++ b/arch/sparc/kernel/of_device.c
@@ -70,7 +70,7 @@ struct of_bus {
 				       int *addrc, int *sizec);
 	int		(*map)(u32 *addr, const u32 *range,
 			       int na, int ns, int pna);
-	unsigned int	(*get_flags)(const u32 *addr);
+	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
 };
 
 /*
@@ -130,8 +130,10 @@ static int of_bus_default_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
 {
+	if (flags)
+		return flags;
 	return IORESOURCE_MEM;
 }
 
@@ -194,17 +196,21 @@ static int of_bus_pci_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 {
-	unsigned int flags = 0;
 	u32 w = addr[0];
 
+	/* For PCI, we override whatever child busses may have used.  */
+	flags = 0;
 	switch((w >> 24) & 0x03) {
 	case 0x01:
 		flags |= IORESOURCE_IO;
+		break;
+
 	case 0x02: /* 32 bits */
 	case 0x03: /* 64 bits */
 		flags |= IORESOURCE_MEM;
+		break;
 	}
 	if (w & 0x40000000)
 		flags |= IORESOURCE_PREFETCH;
@@ -235,7 +241,7 @@ static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 	return of_bus_default_map(addr, range, na, ns, pna);
 }
 
-static unsigned int of_bus_sbus_get_flags(const u32 *addr)
+static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
 {
 	return IORESOURCE_MEM;
 }
@@ -362,10 +368,11 @@ static void __init build_device_resources(struct of_device *op,
 		int pna, pns;
 
 		size = of_read_addr(reg + na, ns);
-		flags = bus->get_flags(reg);
 
 		memcpy(addr, reg, na * 4);
 
+		flags = bus->get_flags(reg, 0);
+
 		/* If the immediate parent has no ranges property to apply,
 		 * just use a 1<->1 mapping.
 		 */
@@ -393,6 +400,8 @@ static void __init build_device_resources(struct of_device *op,
 					       dna, dns, pna))
 				break;
 
+			flags = pbus->get_flags(addr, flags);
+
 			dna = pna;
 			dns = pns;
 			dbus = pbus;
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 20699c70141..8ce6285a06d 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -288,7 +288,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 38 * sizeof(u32),
+		.n = 38,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = genregs32_get, .set = genregs32_set
 	},
@@ -304,7 +304,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 99 * sizeof(u32),
+		.n = 99,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = fpregs32_get, .set = fpregs32_set
 	},
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index dfde77ff084..69596402a50 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -262,8 +262,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-		    unsigned long arg3, unsigned long arg4, unsigned long arg5)
+static void smp4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+			     unsigned long arg2, unsigned long arg3,
+			     unsigned long arg4)
 {
 	if(smp_processors_ready) {
 		register int high = smp_highest_cpu;
@@ -278,7 +279,7 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 			register unsigned long a2 asm("i2") = arg2;
 			register unsigned long a3 asm("i3") = arg3;
 			register unsigned long a4 asm("i4") = arg4;
-			register unsigned long a5 asm("i5") = arg5;
+			register unsigned long a5 asm("i5") = 0;
 
 			__asm__ __volatile__(
 				"std %0, [%6]\n\t"
@@ -290,11 +291,10 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 
 		/* Init receive/complete mapping, plus fire the IPI's off. */
 		{
-			cpumask_t mask;
 			register int i;
 
-			mask = cpumask_of_cpu(hard_smp4d_processor_id());
-			cpus_andnot(mask, cpu_online_map, mask);
+			cpu_clear(smp_processor_id(), mask);
+			cpus_and(mask, cpu_online_map, mask);
 			for(i = 0; i <= high; i++) {
 				if (cpu_isset(i, mask)) {
 					ccall_info.processors_in[i] = 0;
@@ -309,12 +309,16 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_in[i])
 					barrier();
 			} while(++i <= high);
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_out[i])
 					barrier();
 			} while(++i <= high);
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 406ac1abc83..a14a76ac7f3 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -244,9 +244,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
+static void smp4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
 			     unsigned long arg2, unsigned long arg3,
-			     unsigned long arg4, unsigned long arg5)
+			     unsigned long arg4)
 {
 		register int ncpus = SUN4M_NCPUS;
 		unsigned long flags;
@@ -259,14 +259,14 @@ static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
 		ccall_info.arg2 = arg2;
 		ccall_info.arg3 = arg3;
 		ccall_info.arg4 = arg4;
-		ccall_info.arg5 = arg5;
+		ccall_info.arg5 = 0;
 
 		/* Init receive/complete mapping, plus fire the IPI's off. */
 		{
-			cpumask_t mask = cpu_online_map;
 			register int i;
 
 			cpu_clear(smp_processor_id(), mask);
+			cpus_and(mask, cpu_online_map, mask);
 			for(i = 0; i < ncpus; i++) {
 				if (cpu_isset(i, mask)) {
 					ccall_info.processors_in[i] = 0;
@@ -284,12 +284,16 @@ static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_in[i])
 					barrier();
 			} while(++i < ncpus);
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_out[i])
 					barrier();
 			} while(++i < ncpus);
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index ab3dd0b257d..0762f5db192 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -28,6 +28,7 @@
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/profile.h>
+#include <linux/of_device.h>
 
 #include <asm/oplib.h>
 #include <asm/timer.h>
@@ -40,7 +41,6 @@
 #include <asm/sun4paddr.h>
 #include <asm/page.h>
 #include <asm/pcic.h>
-#include <asm/of_device.h>
 #include <asm/irq_regs.h>
 
 #include "irq.h"
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 923a98959fa..36b4b7ab9cf 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -231,6 +231,7 @@ endmenu
 
 config NUMA
 	bool "NUMA support"
+	depends on SMP
 
 config NODES_SHIFT
 	int
diff --git a/arch/sparc64/kernel/auxio.c b/arch/sparc64/kernel/auxio.c
index c55f0293eac..dd5c7bf8761 100644
--- a/arch/sparc64/kernel/auxio.c
+++ b/arch/sparc64/kernel/auxio.c
@@ -9,9 +9,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/of_device.h>
 
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/io.h>
 #include <asm/auxio.h>
 
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index 4d58d7ce708..60d36d14255 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -14,13 +14,13 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/ebus.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/bpp.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index c481673d249..7495bc77468 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -7,6 +7,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/linkage.h>
 #include <linux/ptrace.h>
 #include <linux/errno.h>
 #include <linux/kernel_stat.h>
@@ -682,10 +683,32 @@ void ack_bad_irq(unsigned int virt_irq)
 	       ino, virt_irq);
 }
 
+void *hardirq_stack[NR_CPUS];
+void *softirq_stack[NR_CPUS];
+
+static __attribute__((always_inline)) void *set_hardirq_stack(void)
+{
+	void *orig_sp, *sp = hardirq_stack[smp_processor_id()];
+
+	__asm__ __volatile__("mov %%sp, %0" : "=r" (orig_sp));
+	if (orig_sp < sp ||
+	    orig_sp > (sp + THREAD_SIZE)) {
+		sp += THREAD_SIZE - 192 - STACK_BIAS;
+		__asm__ __volatile__("mov %0, %%sp" : : "r" (sp));
+	}
+
+	return orig_sp;
+}
+static __attribute__((always_inline)) void restore_hardirq_stack(void *orig_sp)
+{
+	__asm__ __volatile__("mov %0, %%sp" : : "r" (orig_sp));
+}
+
 void handler_irq(int irq, struct pt_regs *regs)
 {
 	unsigned long pstate, bucket_pa;
 	struct pt_regs *old_regs;
+	void *orig_sp;
 
 	clear_softint(1 << irq);
 
@@ -703,6 +726,8 @@ void handler_irq(int irq, struct pt_regs *regs)
 			       "i" (PSTATE_IE)
 			     : "memory");
 
+	orig_sp = set_hardirq_stack();
+
 	while (bucket_pa) {
 		struct irq_desc *desc;
 		unsigned long next_pa;
@@ -719,10 +744,38 @@ void handler_irq(int irq, struct pt_regs *regs)
 		bucket_pa = next_pa;
 	}
 
+	restore_hardirq_stack(orig_sp);
+
 	irq_exit();
 	set_irq_regs(old_regs);
 }
 
+void do_softirq(void)
+{
+	unsigned long flags;
+
+	if (in_interrupt())
+		return;
+
+	local_irq_save(flags);
+
+	if (local_softirq_pending()) {
+		void *orig_sp, *sp = softirq_stack[smp_processor_id()];
+
+		sp += THREAD_SIZE - 192 - STACK_BIAS;
+
+		__asm__ __volatile__("mov %%sp, %0\n\t"
+				     "mov %1, %%sp"
+				     : "=&r" (orig_sp)
+				     : "r" (sp));
+		__do_softirq();
+		__asm__ __volatile__("mov %0, %%sp"
+				     : : "r" (orig_sp));
+	}
+
+	local_irq_restore(flags);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 void fixup_irqs(void)
 {
@@ -740,6 +793,8 @@ void fixup_irqs(void)
 		}
 		spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
 	}
+
+	tick_ops->disable_irq();
 }
 #endif
 
@@ -812,7 +867,7 @@ static void kill_prom_timer(void)
 	: "g1", "g2");
 }
 
-void init_irqwork_curcpu(void)
+void notrace init_irqwork_curcpu(void)
 {
 	int cpu = hard_smp_processor_id();
 
@@ -843,7 +898,7 @@ static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type
 	}
 }
 
-void __cpuinit sun4v_register_mondo_queues(int this_cpu)
+void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
 {
 	struct trap_per_cpu *tb = &trap_block[this_cpu];
 
@@ -915,12 +970,18 @@ static void __init sun4v_init_mondo_queues(void)
 		alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
 		alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
 			       tb->nonresum_qmask);
+	}
+}
+
+static void __init init_send_mondo_info(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct trap_per_cpu *tb = &trap_block[cpu];
 
 		init_cpu_send_mondo_info(tb);
 	}
-
-	/* Load up the boot cpu's entries.  */
-	sun4v_register_mondo_queues(hard_smp_processor_id());
 }
 
 static struct irqaction timer_irq_action = {
@@ -949,6 +1010,13 @@ void __init init_IRQ(void)
 	if (tlb_type == hypervisor)
 		sun4v_init_mondo_queues();
 
+	init_send_mondo_info();
+
+	if (tlb_type == hypervisor) {
+		/* Load up the boot cpu's entries.  */
+		sun4v_register_mondo_queues(hard_smp_processor_id());
+	}
+
 	/* We need to clear any IRQ's pending in the soft interrupt
 	 * registers, a spurious one could be left around from the
 	 * PROM timer which we just disabled.
diff --git a/arch/sparc64/kernel/kstack.h b/arch/sparc64/kernel/kstack.h
new file mode 100644
index 00000000000..4248d969272
--- /dev/null
+++ b/arch/sparc64/kernel/kstack.h
@@ -0,0 +1,60 @@
+#ifndef _KSTACK_H
+#define _KSTACK_H
+
+#include <linux/thread_info.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+#include <asm/irq.h>
+
+/* SP must be STACK_BIAS adjusted already.  */
+static inline bool kstack_valid(struct thread_info *tp, unsigned long sp)
+{
+	unsigned long base = (unsigned long) tp;
+
+	if (sp >= (base + sizeof(struct thread_info)) &&
+	    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
+		return true;
+
+	if (hardirq_stack[tp->cpu]) {
+		base = (unsigned long) hardirq_stack[tp->cpu];
+		if (sp >= base &&
+		    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
+			return true;
+		base = (unsigned long) softirq_stack[tp->cpu];
+		if (sp >= base &&
+		    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
+			return true;
+	}
+	return false;
+}
+
+/* Does "regs" point to a valid pt_regs trap frame?  */
+static inline bool kstack_is_trap_frame(struct thread_info *tp, struct pt_regs *regs)
+{
+	unsigned long base = (unsigned long) tp;
+	unsigned long addr = (unsigned long) regs;
+
+	if (addr >= base &&
+	    addr <= (base + THREAD_SIZE - sizeof(*regs)))
+		goto check_magic;
+
+	if (hardirq_stack[tp->cpu]) {
+		base = (unsigned long) hardirq_stack[tp->cpu];
+		if (addr >= base &&
+		    addr <= (base + THREAD_SIZE - sizeof(*regs)))
+			goto check_magic;
+		base = (unsigned long) softirq_stack[tp->cpu];
+		if (addr >= base &&
+		    addr <= (base + THREAD_SIZE - sizeof(*regs)))
+			goto check_magic;
+	}
+	return false;
+
+check_magic:
+	if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC)
+		return true;
+	return false;
+
+}
+
+#endif /* _KSTACK_H */
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index 4fd48ab7dda..f845f150f56 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -56,9 +56,6 @@ struct of_device *of_find_device_by_node(struct device_node *dp)
 EXPORT_SYMBOL(of_find_device_by_node);
 
 #ifdef CONFIG_PCI
-struct bus_type isa_bus_type;
-EXPORT_SYMBOL(isa_bus_type);
-
 struct bus_type ebus_bus_type;
 EXPORT_SYMBOL(ebus_bus_type);
 #endif
@@ -99,7 +96,7 @@ struct of_bus {
 				       int *addrc, int *sizec);
 	int		(*map)(u32 *addr, const u32 *range,
 			       int na, int ns, int pna);
-	unsigned int	(*get_flags)(const u32 *addr);
+	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
 };
 
 /*
@@ -159,8 +156,10 @@ static int of_bus_default_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
 {
+	if (flags)
+		return flags;
 	return IORESOURCE_MEM;
 }
 
@@ -252,17 +251,21 @@ static int of_bus_pci_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 {
-	unsigned int flags = 0;
 	u32 w = addr[0];
 
+	/* For PCI, we override whatever child busses may have used.  */
+	flags = 0;
 	switch((w >> 24) & 0x03) {
 	case 0x01:
 		flags |= IORESOURCE_IO;
+		break;
+
 	case 0x02: /* 32 bits */
 	case 0x03: /* 64 bits */
 		flags |= IORESOURCE_MEM;
+		break;
 	}
 	if (w & 0x40000000)
 		flags |= IORESOURCE_PREFETCH;
@@ -481,10 +484,10 @@ static void __init build_device_resources(struct of_device *op,
 		int pna, pns;
 
 		size = of_read_addr(reg + na, ns);
-		flags = bus->get_flags(reg);
-
 		memcpy(addr, reg, na * 4);
 
+		flags = bus->get_flags(addr, 0);
+
 		if (use_1to1_mapping(pp)) {
 			result = of_read_addr(addr, na);
 			goto build_res;
@@ -509,6 +512,8 @@ static void __init build_device_resources(struct of_device *op,
 					       dna, dns, pna))
 				break;
 
+			flags = pbus->get_flags(addr, flags);
+
 			dna = pna;
 			dns = pns;
 			dbus = pbus;
@@ -842,8 +847,6 @@ static int __init of_bus_driver_init(void)
 	err = of_bus_type_init(&of_platform_bus_type, "of");
 #ifdef CONFIG_PCI
 	if (!err)
-		err = of_bus_type_init(&isa_bus_type, "isa");
-	if (!err)
 		err = of_bus_type_init(&ebus_bus_type, "ebus");
 #endif
 #ifdef CONFIG_SBUS
diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c
index 19fa621d6a6..09a5ec200c6 100644
--- a/arch/sparc64/kernel/pci_common.c
+++ b/arch/sparc64/kernel/pci_common.c
@@ -8,9 +8,9 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/device.h>
+#include <linux/of_device.h>
 
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 
 #include "pci_impl.h"
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index 994dbe0603d..f85b6bebb0b 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -11,12 +11,12 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of_device.h>
 
 #include <asm/iommu.h>
 #include <asm/irq.h>
 #include <asm/starfire.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 
 #include "pci_impl.h"
@@ -575,7 +575,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm
 {
 	unsigned long csr_reg, csr, csr_error_bits;
 	irqreturn_t ret = IRQ_NONE;
-	u16 stat;
+	u16 stat, *addr;
 
 	if (is_pbm_a) {
 		csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL;
@@ -597,7 +597,9 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm
 			printk("%s: PCI SERR signal asserted.\n", pbm->name);
 		ret = IRQ_HANDLED;
 	}
-	pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat);
+	addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
+					0, PCI_STATUS);
+	pci_config_read16(addr, &stat);
 	if (stat & (PCI_STATUS_PARITY |
 		    PCI_STATUS_SIG_TARGET_ABORT |
 		    PCI_STATUS_REC_TARGET_ABORT |
@@ -605,7 +607,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm
 		    PCI_STATUS_SIG_SYSTEM_ERROR)) {
 		printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
 		       pbm->name, stat);
-		pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff);
+		pci_config_write16(addr, 0xffff);
 		ret = IRQ_HANDLED;
 	}
 	return ret;
@@ -744,16 +746,16 @@ static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
 	 * the second will just error out since we do not pass in
 	 * IRQF_SHARED.
 	 */
-	err = request_irq(op->irqs[1], psycho_ue_intr, 0,
+	err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED,
 			  "PSYCHO_UE", pbm);
-	err = request_irq(op->irqs[2], psycho_ce_intr, 0,
+	err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED,
 			  "PSYCHO_CE", pbm);
 
 	/* This one, however, ought not to fail.  We can just warn
 	 * about it since the system can still operate properly even
 	 * if this fails.
 	 */
-	err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
+	err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
 			  "PSYCHO_PCIERR", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Could not register PCIERR, "
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 4c34195baf3..ade5184e75d 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of_device.h>
 
 #include <asm/apb.h>
 #include <asm/iommu.h>
@@ -18,7 +19,6 @@
 #include <asm/smp.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #include "pci_impl.h"
 #include "iommu_common.h"
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index 615edd9c8e2..9248c6737f0 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -9,13 +9,13 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of_device.h>
 
 #include <asm/iommu.h>
 #include <asm/irq.h>
 #include <asm/upa.h>
 #include <asm/pstate.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 
 #include "pci_impl.h"
diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c
index eae8ca2a6ba..3bb987a6d03 100644
--- a/arch/sparc64/kernel/power.c
+++ b/arch/sparc64/kernel/power.c
@@ -13,11 +13,11 @@
 #include <linux/pm.h>
 #include <linux/syscalls.h>
 #include <linux/reboot.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/auxio.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/io.h>
 #include <asm/sstate.h>
 #include <asm/reboot.h>
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 8a9cd3e165b..15f4178592e 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -52,7 +52,7 @@
 #include <asm/irq_regs.h>
 #include <asm/smp.h>
 
-/* #define VERBOSE_SHOWREGS */
+#include "kstack.h"
 
 static void sparc64_yield(int cpu)
 {
@@ -213,22 +213,8 @@ static void show_regwindow(struct pt_regs *regs)
 		printk("I7: <%pS>\n", (void *) rwk->ins[7]);
 }
 
-#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(regdump_lock);
-#endif
-
-void __show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
-#ifdef CONFIG_SMP
-	unsigned long flags;
-
-	/* Protect against xcall ipis which might lead to livelock on the lock */
-	__asm__ __volatile__("rdpr      %%pstate, %0\n\t"
-			     "wrpr      %0, %1, %%pstate"
-			     : "=r" (flags)
-			     : "i" (PSTATE_IE));
-	spin_lock(&regdump_lock);
-#endif
 	printk("TSTATE: %016lx TPC: %016lx TNPC: %016lx Y: %08x    %s\n", regs->tstate,
 	       regs->tpc, regs->tnpc, regs->y, print_tainted());
 	printk("TPC: <%pS>\n", (void *) regs->tpc);
@@ -246,61 +232,8 @@ void __show_regs(struct pt_regs * regs)
 	       regs->u_regs[15]);
 	printk("RPC: <%pS>\n", (void *) regs->u_regs[15]);
 	show_regwindow(regs);
-#ifdef CONFIG_SMP
-	spin_unlock(&regdump_lock);
-	__asm__ __volatile__("wrpr	%0, 0, %%pstate"
-			     : : "r" (flags));
-#endif
-}
-
-#ifdef VERBOSE_SHOWREGS
-static void idump_from_user (unsigned int *pc)
-{
-	int i;
-	int code;
-	
-	if((((unsigned long) pc) & 3))
-		return;
-	
-	pc -= 3;
-	for(i = -3; i < 6; i++) {
-		get_user(code, pc);
-		printk("%c%08x%c",i?' ':'<',code,i?' ':'>');
-		pc++;
-	}
-	printk("\n");
-}
-#endif
-
-void show_regs(struct pt_regs *regs)
-{
-#ifdef VERBOSE_SHOWREGS
-	extern long etrap, etraptl1;
-#endif
-	__show_regs(regs);
-#if 0
-#ifdef CONFIG_SMP
-	{
-		extern void smp_report_regs(void);
-
-		smp_report_regs();
-	}
-#endif
-#endif
-
-#ifdef VERBOSE_SHOWREGS	
-	if (regs->tpc >= &etrap && regs->tpc < &etraptl1 &&
-	    regs->u_regs[14] >= (long)current - PAGE_SIZE &&
-	    regs->u_regs[14] < (long)current + 6 * PAGE_SIZE) {
-		printk ("*********parent**********\n");
-		__show_regs((struct pt_regs *)(regs->u_regs[14] + PTREGS_OFF));
-		idump_from_user(((struct pt_regs *)(regs->u_regs[14] + PTREGS_OFF))->tpc);
-		printk ("*********endpar**********\n");
-	}
-#endif
 }
 
-#ifdef CONFIG_MAGIC_SYSRQ
 struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
 static DEFINE_SPINLOCK(global_reg_snapshot_lock);
 
@@ -315,14 +248,22 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs,
 	global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7];
 
 	if (regs->tstate & TSTATE_PRIV) {
+		struct thread_info *tp = current_thread_info();
 		struct reg_window *rw;
 
 		rw = (struct reg_window *)
 			(regs->u_regs[UREG_FP] + STACK_BIAS);
-		global_reg_snapshot[this_cpu].i7 = rw->ins[6];
-	} else
+		if (kstack_valid(tp, (unsigned long) rw)) {
+			global_reg_snapshot[this_cpu].i7 = rw->ins[7];
+			rw = (struct reg_window *)
+				(rw->ins[6] + STACK_BIAS);
+			if (kstack_valid(tp, (unsigned long) rw))
+				global_reg_snapshot[this_cpu].rpc = rw->ins[7];
+		}
+	} else {
 		global_reg_snapshot[this_cpu].i7 = 0;
-
+		global_reg_snapshot[this_cpu].rpc = 0;
+	}
 	global_reg_snapshot[this_cpu].thread = tp;
 }
 
@@ -341,7 +282,7 @@ static void __global_reg_poll(struct global_reg_snapshot *gp)
 	}
 }
 
-static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+void __trigger_all_cpu_backtrace(void)
 {
 	struct thread_info *tp = current_thread_info();
 	struct pt_regs *regs = get_irq_regs();
@@ -375,13 +316,14 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 		       ((tp && tp->task) ? tp->task->pid : -1));
 
 		if (gp->tstate & TSTATE_PRIV) {
-			printk("             TPC[%pS] O7[%pS] I7[%pS]\n",
+			printk("             TPC[%pS] O7[%pS] I7[%pS] RPC[%pS]\n",
 			       (void *) gp->tpc,
 			       (void *) gp->o7,
-			       (void *) gp->i7);
+			       (void *) gp->i7,
+			       (void *) gp->rpc);
 		} else {
-			printk("             TPC[%lx] O7[%lx] I7[%lx]\n",
-			       gp->tpc, gp->o7, gp->i7);
+			printk("             TPC[%lx] O7[%lx] I7[%lx] RPC[%lx]\n",
+			       gp->tpc, gp->o7, gp->i7, gp->rpc);
 		}
 	}
 
@@ -390,6 +332,13 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 	spin_unlock_irqrestore(&global_reg_snapshot_lock, flags);
 }
 
+#ifdef CONFIG_MAGIC_SYSRQ
+
+static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+{
+	__trigger_all_cpu_backtrace();
+}
+
 static struct sysrq_key_op sparc_globalreg_op = {
 	.handler	= sysrq_handle_globreg,
 	.help_msg	= "Globalregs",
@@ -868,7 +817,7 @@ out:
 unsigned long get_wchan(struct task_struct *task)
 {
 	unsigned long pc, fp, bias = 0;
-	unsigned long thread_info_base;
+	struct thread_info *tp;
 	struct reg_window *rw;
         unsigned long ret = 0;
 	int count = 0; 
@@ -877,14 +826,12 @@ unsigned long get_wchan(struct task_struct *task)
             task->state == TASK_RUNNING)
 		goto out;
 
-	thread_info_base = (unsigned long) task_stack_page(task);
+	tp = task_thread_info(task);
 	bias = STACK_BIAS;
 	fp = task_thread_info(task)->ksp + bias;
 
 	do {
-		/* Bogus frame pointer? */
-		if (fp < (thread_info_base + sizeof(struct thread_info)) ||
-		    fp >= (thread_info_base + THREAD_SIZE))
+		if (!kstack_valid(tp, fp))
 			break;
 		rw = (struct reg_window *) fp;
 		pc = rw->ins[7];
diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c
index ed03a18d3b3..7151513f156 100644
--- a/arch/sparc64/kernel/prom.c
+++ b/arch/sparc64/kernel/prom.c
@@ -21,9 +21,9 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/lmb.h>
+#include <linux/of_device.h>
 
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 #include <asm/irq.h>
 #include <asm/asi.h>
@@ -156,55 +156,11 @@ static unsigned long psycho_pcislot_imap_offset(unsigned long ino)
 		return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
 }
 
-#define PSYCHO_IMAP_SCSI	0x1000UL
-#define PSYCHO_IMAP_ETH		0x1008UL
-#define PSYCHO_IMAP_BPP		0x1010UL
-#define PSYCHO_IMAP_AU_REC	0x1018UL
-#define PSYCHO_IMAP_AU_PLAY	0x1020UL
-#define PSYCHO_IMAP_PFAIL	0x1028UL
-#define PSYCHO_IMAP_KMS		0x1030UL
-#define PSYCHO_IMAP_FLPY	0x1038UL
-#define PSYCHO_IMAP_SHW		0x1040UL
-#define PSYCHO_IMAP_KBD		0x1048UL
-#define PSYCHO_IMAP_MS		0x1050UL
-#define PSYCHO_IMAP_SER		0x1058UL
-#define PSYCHO_IMAP_TIM0	0x1060UL
-#define PSYCHO_IMAP_TIM1	0x1068UL
-#define PSYCHO_IMAP_UE		0x1070UL
-#define PSYCHO_IMAP_CE		0x1078UL
-#define PSYCHO_IMAP_A_ERR	0x1080UL
-#define PSYCHO_IMAP_B_ERR	0x1088UL
-#define PSYCHO_IMAP_PMGMT	0x1090UL
-#define PSYCHO_IMAP_GFX		0x1098UL
-#define PSYCHO_IMAP_EUPA	0x10a0UL
-
-static unsigned long __psycho_onboard_imap_off[] = {
-/*0x20*/	PSYCHO_IMAP_SCSI,
-/*0x21*/	PSYCHO_IMAP_ETH,
-/*0x22*/	PSYCHO_IMAP_BPP,
-/*0x23*/	PSYCHO_IMAP_AU_REC,
-/*0x24*/	PSYCHO_IMAP_AU_PLAY,
-/*0x25*/	PSYCHO_IMAP_PFAIL,
-/*0x26*/	PSYCHO_IMAP_KMS,
-/*0x27*/	PSYCHO_IMAP_FLPY,
-/*0x28*/	PSYCHO_IMAP_SHW,
-/*0x29*/	PSYCHO_IMAP_KBD,
-/*0x2a*/	PSYCHO_IMAP_MS,
-/*0x2b*/	PSYCHO_IMAP_SER,
-/*0x2c*/	PSYCHO_IMAP_TIM0,
-/*0x2d*/	PSYCHO_IMAP_TIM1,
-/*0x2e*/	PSYCHO_IMAP_UE,
-/*0x2f*/	PSYCHO_IMAP_CE,
-/*0x30*/	PSYCHO_IMAP_A_ERR,
-/*0x31*/	PSYCHO_IMAP_B_ERR,
-/*0x32*/	PSYCHO_IMAP_PMGMT,
-/*0x33*/	PSYCHO_IMAP_GFX,
-/*0x34*/	PSYCHO_IMAP_EUPA,
-};
+#define PSYCHO_OBIO_IMAP_BASE	0x1000UL
+
 #define PSYCHO_ONBOARD_IRQ_BASE		0x20
-#define PSYCHO_ONBOARD_IRQ_LAST		0x34
 #define psycho_onboard_imap_offset(__ino) \
-	__psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE]
+	(PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
 
 #define PSYCHO_ICLR_A_SLOT0	0x1400UL
 #define PSYCHO_ICLR_SCSI	0x1800UL
@@ -228,10 +184,6 @@ static unsigned int psycho_irq_build(struct device_node *dp,
 		imap_off = psycho_pcislot_imap_offset(ino);
 	} else {
 		/* Onboard device */
-		if (ino > PSYCHO_ONBOARD_IRQ_LAST) {
-			prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino);
-			prom_halt();
-		}
 		imap_off = psycho_onboard_imap_offset(ino);
 	}
 
@@ -318,23 +270,6 @@ static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
 
 #define SABRE_IMAP_A_SLOT0	0x0c00UL
 #define SABRE_IMAP_B_SLOT0	0x0c20UL
-#define SABRE_IMAP_SCSI		0x1000UL
-#define SABRE_IMAP_ETH		0x1008UL
-#define SABRE_IMAP_BPP		0x1010UL
-#define SABRE_IMAP_AU_REC	0x1018UL
-#define SABRE_IMAP_AU_PLAY	0x1020UL
-#define SABRE_IMAP_PFAIL	0x1028UL
-#define SABRE_IMAP_KMS		0x1030UL
-#define SABRE_IMAP_FLPY		0x1038UL
-#define SABRE_IMAP_SHW		0x1040UL
-#define SABRE_IMAP_KBD		0x1048UL
-#define SABRE_IMAP_MS		0x1050UL
-#define SABRE_IMAP_SER		0x1058UL
-#define SABRE_IMAP_UE		0x1070UL
-#define SABRE_IMAP_CE		0x1078UL
-#define SABRE_IMAP_PCIERR	0x1080UL
-#define SABRE_IMAP_GFX		0x1098UL
-#define SABRE_IMAP_EUPA		0x10a0UL
 #define SABRE_ICLR_A_SLOT0	0x1400UL
 #define SABRE_ICLR_B_SLOT0	0x1480UL
 #define SABRE_ICLR_SCSI		0x1800UL
@@ -364,33 +299,10 @@ static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
 		return SABRE_IMAP_B_SLOT0 + (slot * 8);
 }
 
-static unsigned long __sabre_onboard_imap_off[] = {
-/*0x20*/	SABRE_IMAP_SCSI,
-/*0x21*/	SABRE_IMAP_ETH,
-/*0x22*/	SABRE_IMAP_BPP,
-/*0x23*/	SABRE_IMAP_AU_REC,
-/*0x24*/	SABRE_IMAP_AU_PLAY,
-/*0x25*/	SABRE_IMAP_PFAIL,
-/*0x26*/	SABRE_IMAP_KMS,
-/*0x27*/	SABRE_IMAP_FLPY,
-/*0x28*/	SABRE_IMAP_SHW,
-/*0x29*/	SABRE_IMAP_KBD,
-/*0x2a*/	SABRE_IMAP_MS,
-/*0x2b*/	SABRE_IMAP_SER,
-/*0x2c*/	0 /* reserved */,
-/*0x2d*/	0 /* reserved */,
-/*0x2e*/	SABRE_IMAP_UE,
-/*0x2f*/	SABRE_IMAP_CE,
-/*0x30*/	SABRE_IMAP_PCIERR,
-/*0x31*/	0 /* reserved */,
-/*0x32*/	0 /* reserved */,
-/*0x33*/	SABRE_IMAP_GFX,
-/*0x34*/	SABRE_IMAP_EUPA,
-};
-#define SABRE_ONBOARD_IRQ_BASE		0x20
-#define SABRE_ONBOARD_IRQ_LAST		0x30
+#define SABRE_OBIO_IMAP_BASE	0x1000UL
+#define SABRE_ONBOARD_IRQ_BASE	0x20
 #define sabre_onboard_imap_offset(__ino) \
-	__sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
+	(SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
 
 #define sabre_iclr_offset(ino)					      \
 	((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) :  \
@@ -453,10 +365,6 @@ static unsigned int sabre_irq_build(struct device_node *dp,
 		imap_off = sabre_pcislot_imap_offset(ino);
 	} else {
 		/* onboard device */
-		if (ino > SABRE_ONBOARD_IRQ_LAST) {
-			prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
-			prom_halt();
-		}
 		imap_off = sabre_onboard_imap_offset(ino);
 	}
 
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index bd578cc4856..10306e476e3 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -443,7 +443,7 @@ static const struct user_regset sparc64_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 36 * sizeof(u64),
+		.n = 36,
 		.size = sizeof(u64), .align = sizeof(u64),
 		.get = genregs64_get, .set = genregs64_set
 	},
@@ -455,7 +455,7 @@ static const struct user_regset sparc64_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 35 * sizeof(u64),
+		.n = 35,
 		.size = sizeof(u64), .align = sizeof(u64),
 		.get = fpregs64_get, .set = fpregs64_set
 	},
@@ -801,7 +801,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 38 * sizeof(u32),
+		.n = 38,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = genregs32_get, .set = genregs32_set
 	},
@@ -817,7 +817,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 99 * sizeof(u32),
+		.n = 99,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = fpregs32_get, .set = fpregs32_set
 	},
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index d1b84456a9e..ec82d76dc6f 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -2,7 +2,7 @@
  *  arch/sparc64/kernel/signal.c
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
  *  Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
  *  Copyright (C) 1997 Eddie C. Dost   (ecd@skynet.be)
  *  Copyright (C) 1997,1998 Jakub Jelinek   (jj@sunsite.mff.cuni.cz)
@@ -23,7 +23,6 @@
 #include <linux/tty.h>
 #include <linux/binfmts.h>
 #include <linux/bitops.h>
-#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -91,7 +90,9 @@ asmlinkage void sparc64_set_context(struct pt_regs *regs)
 	err |= __get_user(regs->u_regs[UREG_G4], (&(*grp)[MC_G4]));
 	err |= __get_user(regs->u_regs[UREG_G5], (&(*grp)[MC_G5]));
 	err |= __get_user(regs->u_regs[UREG_G6], (&(*grp)[MC_G6]));
-	err |= __get_user(regs->u_regs[UREG_G7], (&(*grp)[MC_G7]));
+
+	/* Skip %g7 as that's the thread register in userspace.  */
+
 	err |= __get_user(regs->u_regs[UREG_I0], (&(*grp)[MC_O0]));
 	err |= __get_user(regs->u_regs[UREG_I1], (&(*grp)[MC_O1]));
 	err |= __get_user(regs->u_regs[UREG_I2], (&(*grp)[MC_O2]));
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 7cf72b4bb10..2be166c544c 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -80,8 +80,6 @@ void smp_bogo(struct seq_file *m)
 			   i, cpu_data(i).clock_tick);
 }
 
-static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
-
 extern void setup_sparc64_timer(void);
 
 static volatile unsigned long callin_flag = 0;
@@ -120,9 +118,9 @@ void __cpuinit smp_callin(void)
 	while (!cpu_isset(cpuid, smp_commenced_mask))
 		rmb();
 
-	spin_lock(&call_lock);
+	ipi_call_lock();
 	cpu_set(cpuid, cpu_online_map);
-	spin_unlock(&call_lock);
+	ipi_call_unlock();
 
 	/* idle thread is expected to have preempt disabled */
 	preempt_disable();
@@ -459,27 +457,35 @@ again:
 	}
 }
 
-static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void spitfire_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
+	u64 *mondo, data0, data1, data2;
+	u16 *cpu_list;
 	u64 pstate;
 	int i;
 
 	__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
-	for_each_cpu_mask(i, mask)
-		spitfire_xcall_helper(data0, data1, data2, pstate, i);
+	cpu_list = __va(tb->cpu_list_pa);
+	mondo = __va(tb->cpu_mondo_block_pa);
+	data0 = mondo[0];
+	data1 = mondo[1];
+	data2 = mondo[2];
+	for (i = 0; i < cnt; i++)
+		spitfire_xcall_helper(data0, data1, data2, pstate, cpu_list[i]);
 }
 
 /* Cheetah now allows to send the whole 64-bytes of data in the interrupt
  * packet, but we have no use for that.  However we do take advantage of
  * the new pipelining feature (ie. dispatch to multiple cpus simultaneously).
  */
-static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void cheetah_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
-	u64 pstate, ver, busy_mask;
 	int nack_busy_id, is_jbus, need_more;
+	u64 *mondo, pstate, ver, busy_mask;
+	u16 *cpu_list;
 
-	if (cpus_empty(mask))
-		return;
+	cpu_list = __va(tb->cpu_list_pa);
+	mondo = __va(tb->cpu_mondo_block_pa);
 
 	/* Unfortunately, someone at Sun had the brilliant idea to make the
 	 * busy/nack fields hard-coded by ITID number for this Ultra-III
@@ -502,7 +508,7 @@ retry:
 			     "stxa	%2, [%5] %6\n\t"
 			     "membar	#Sync\n\t"
 			     : /* no outputs */
-			     : "r" (data0), "r" (data1), "r" (data2),
+			     : "r" (mondo[0]), "r" (mondo[1]), "r" (mondo[2]),
 			       "r" (0x40), "r" (0x50), "r" (0x60),
 			       "i" (ASI_INTR_W));
 
@@ -511,11 +517,16 @@ retry:
 	{
 		int i;
 
-		for_each_cpu_mask(i, mask) {
-			u64 target = (i << 14) | 0x70;
+		for (i = 0; i < cnt; i++) {
+			u64 target, nr;
+
+			nr = cpu_list[i];
+			if (nr == 0xffff)
+				continue;
 
+			target = (nr << 14) | 0x70;
 			if (is_jbus) {
-				busy_mask |= (0x1UL << (i * 2));
+				busy_mask |= (0x1UL << (nr * 2));
 			} else {
 				target |= (nack_busy_id << 24);
 				busy_mask |= (0x1UL <<
@@ -549,11 +560,13 @@ retry:
 				__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
 						     : : "r" (pstate));
 				if (unlikely(need_more)) {
-					int i, cnt = 0;
-					for_each_cpu_mask(i, mask) {
-						cpu_clear(i, mask);
-						cnt++;
-						if (cnt == 32)
+					int i, this_cnt = 0;
+					for (i = 0; i < cnt; i++) {
+						if (cpu_list[i] == 0xffff)
+							continue;
+						cpu_list[i] = 0xffff;
+						this_cnt++;
+						if (this_cnt == 32)
 							break;
 					}
 					goto retry;
@@ -584,16 +597,20 @@ retry:
 			/* Clear out the mask bits for cpus which did not
 			 * NACK us.
 			 */
-			for_each_cpu_mask(i, mask) {
-				u64 check_mask;
+			for (i = 0; i < cnt; i++) {
+				u64 check_mask, nr;
+
+				nr = cpu_list[i];
+				if (nr == 0xffff)
+					continue;
 
 				if (is_jbus)
-					check_mask = (0x2UL << (2*i));
+					check_mask = (0x2UL << (2*nr));
 				else
 					check_mask = (0x2UL <<
 						      this_busy_nack);
 				if ((dispatch_stat & check_mask) == 0)
-					cpu_clear(i, mask);
+					cpu_list[i] = 0xffff;
 				this_busy_nack += 2;
 				if (this_busy_nack == 64)
 					break;
@@ -605,47 +622,17 @@ retry:
 }
 
 /* Multi-cpu list version.  */
-static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
-	struct trap_per_cpu *tb;
+	int retries, this_cpu, prev_sent, i, saw_cpu_error;
+	unsigned long status;
 	u16 *cpu_list;
-	u64 *mondo;
-	cpumask_t error_mask;
-	unsigned long flags, status;
-	int cnt, retries, this_cpu, prev_sent, i;
-
-	if (cpus_empty(mask))
-		return;
-
-	/* We have to do this whole thing with interrupts fully disabled.
-	 * Otherwise if we send an xcall from interrupt context it will
-	 * corrupt both our mondo block and cpu list state.
-	 *
-	 * One consequence of this is that we cannot use timeout mechanisms
-	 * that depend upon interrupts being delivered locally.  So, for
-	 * example, we cannot sample jiffies and expect it to advance.
-	 *
-	 * Fortunately, udelay() uses %stick/%tick so we can use that.
-	 */
-	local_irq_save(flags);
 
 	this_cpu = smp_processor_id();
-	tb = &trap_block[this_cpu];
-
-	mondo = __va(tb->cpu_mondo_block_pa);
-	mondo[0] = data0;
-	mondo[1] = data1;
-	mondo[2] = data2;
-	wmb();
 
 	cpu_list = __va(tb->cpu_list_pa);
 
-	/* Setup the initial cpu list.  */
-	cnt = 0;
-	for_each_cpu_mask(i, mask)
-		cpu_list[cnt++] = i;
-
-	cpus_clear(error_mask);
+	saw_cpu_error = 0;
 	retries = 0;
 	prev_sent = 0;
 	do {
@@ -690,10 +677,9 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t
 					continue;
 
 				err = sun4v_cpu_state(cpu);
-				if (err >= 0 &&
-				    err == HV_CPU_STATE_ERROR) {
+				if (err == HV_CPU_STATE_ERROR) {
+					saw_cpu_error = (cpu + 1);
 					cpu_list[i] = 0xffff;
-					cpu_set(cpu, error_mask);
 				}
 			}
 		} else if (unlikely(status != HV_EWOULDBLOCK))
@@ -717,32 +703,24 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t
 		}
 	} while (1);
 
-	local_irq_restore(flags);
-
-	if (unlikely(!cpus_empty(error_mask)))
+	if (unlikely(saw_cpu_error))
 		goto fatal_mondo_cpu_error;
 
 	return;
 
 fatal_mondo_cpu_error:
 	printk(KERN_CRIT "CPU[%d]: SUN4V mondo cpu error, some target cpus "
-	       "were in error state\n",
-	       this_cpu);
-	printk(KERN_CRIT "CPU[%d]: Error mask [ ", this_cpu);
-	for_each_cpu_mask(i, error_mask)
-		printk("%d ", i);
-	printk("]\n");
+	       "(including %d) were in error state\n",
+	       this_cpu, saw_cpu_error - 1);
 	return;
 
 fatal_mondo_timeout:
-	local_irq_restore(flags);
 	printk(KERN_CRIT "CPU[%d]: SUN4V mondo timeout, no forward "
 	       " progress after %d retries.\n",
 	       this_cpu, retries);
 	goto dump_cpu_list_and_out;
 
 fatal_mondo_error:
-	local_irq_restore(flags);
 	printk(KERN_CRIT "CPU[%d]: Unexpected SUN4V mondo error %lu\n",
 	       this_cpu, status);
 	printk(KERN_CRIT "CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) "
@@ -756,58 +734,93 @@ dump_cpu_list_and_out:
 	printk("]\n");
 }
 
-/* Send cross call to all processors mentioned in MASK
- * except self.
+static void (*xcall_deliver_impl)(struct trap_per_cpu *, int);
+
+static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask)
+{
+	struct trap_per_cpu *tb;
+	int this_cpu, i, cnt;
+	unsigned long flags;
+	u16 *cpu_list;
+	u64 *mondo;
+
+	/* We have to do this whole thing with interrupts fully disabled.
+	 * Otherwise if we send an xcall from interrupt context it will
+	 * corrupt both our mondo block and cpu list state.
+	 *
+	 * One consequence of this is that we cannot use timeout mechanisms
+	 * that depend upon interrupts being delivered locally.  So, for
+	 * example, we cannot sample jiffies and expect it to advance.
+	 *
+	 * Fortunately, udelay() uses %stick/%tick so we can use that.
+	 */
+	local_irq_save(flags);
+
+	this_cpu = smp_processor_id();
+	tb = &trap_block[this_cpu];
+
+	mondo = __va(tb->cpu_mondo_block_pa);
+	mondo[0] = data0;
+	mondo[1] = data1;
+	mondo[2] = data2;
+	wmb();
+
+	cpu_list = __va(tb->cpu_list_pa);
+
+	/* Setup the initial cpu list.  */
+	cnt = 0;
+	for_each_cpu_mask_nr(i, *mask) {
+		if (i == this_cpu || !cpu_online(i))
+			continue;
+		cpu_list[cnt++] = i;
+	}
+
+	if (cnt)
+		xcall_deliver_impl(tb, cnt);
+
+	local_irq_restore(flags);
+}
+
+/* Send cross call to all processors mentioned in MASK_P
+ * except self.  Really, there are only two cases currently,
+ * "&cpu_online_map" and "&mm->cpu_vm_mask".
  */
-static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, cpumask_t mask)
+static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, const cpumask_t *mask)
 {
 	u64 data0 = (((u64)ctx)<<32 | (((u64)func) & 0xffffffff));
-	int this_cpu = get_cpu();
 
-	cpus_and(mask, mask, cpu_online_map);
-	cpu_clear(this_cpu, mask);
-
-	if (tlb_type == spitfire)
-		spitfire_xcall_deliver(data0, data1, data2, mask);
-	else if (tlb_type == cheetah || tlb_type == cheetah_plus)
-		cheetah_xcall_deliver(data0, data1, data2, mask);
-	else
-		hypervisor_xcall_deliver(data0, data1, data2, mask);
-	/* NOTE: Caller runs local copy on master. */
+	xcall_deliver(data0, data1, data2, mask);
+}
 
-	put_cpu();
+/* Send cross call to all processors except self. */
+static void smp_cross_call(unsigned long *func, u32 ctx, u64 data1, u64 data2)
+{
+	smp_cross_call_masked(func, ctx, data1, data2, &cpu_online_map);
 }
 
 extern unsigned long xcall_sync_tick;
 
 static void smp_start_sync_tick_client(int cpu)
 {
-	cpumask_t mask = cpumask_of_cpu(cpu);
-
-	smp_cross_call_masked(&xcall_sync_tick,
-			      0, 0, 0, mask);
+	xcall_deliver((u64) &xcall_sync_tick, 0, 0,
+		      &cpumask_of_cpu(cpu));
 }
 
 extern unsigned long xcall_call_function;
 
 void arch_send_call_function_ipi(cpumask_t mask)
 {
-	smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask);
+	xcall_deliver((u64) &xcall_call_function, 0, 0, &mask);
 }
 
 extern unsigned long xcall_call_function_single;
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	cpumask_t mask = cpumask_of_cpu(cpu);
-
-	smp_cross_call_masked(&xcall_call_function_single, 0, 0, 0, mask);
+	xcall_deliver((u64) &xcall_call_function_single, 0, 0,
+		      &cpumask_of_cpu(cpu));
 }
 
-/* Send cross call to all processors except self. */
-#define smp_cross_call(func, ctx, data1, data2) \
-	smp_cross_call_masked(func, ctx, data1, data2, cpu_online_map)
-
 void smp_call_function_client(int irq, struct pt_regs *regs)
 {
 	clear_softint(1 << irq);
@@ -843,10 +856,7 @@ void smp_tsb_sync(struct mm_struct *mm)
 extern unsigned long xcall_flush_tlb_mm;
 extern unsigned long xcall_flush_tlb_pending;
 extern unsigned long xcall_flush_tlb_kernel_range;
-extern unsigned long xcall_report_regs;
-#ifdef CONFIG_MAGIC_SYSRQ
 extern unsigned long xcall_fetch_glob_regs;
-#endif
 extern unsigned long xcall_receive_signal;
 extern unsigned long xcall_new_mmu_context_version;
 #ifdef CONFIG_KGDB
@@ -878,7 +888,6 @@ static inline void __local_flush_dcache_page(struct page *page)
 
 void smp_flush_dcache_page_impl(struct page *page, int cpu)
 {
-	cpumask_t mask = cpumask_of_cpu(cpu);
 	int this_cpu;
 
 	if (tlb_type == hypervisor)
@@ -894,29 +903,24 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu)
 		__local_flush_dcache_page(page);
 	} else if (cpu_online(cpu)) {
 		void *pg_addr = page_address(page);
-		u64 data0;
+		u64 data0 = 0;
 
 		if (tlb_type == spitfire) {
-			data0 =
-				((u64)&xcall_flush_dcache_page_spitfire);
+			data0 = ((u64)&xcall_flush_dcache_page_spitfire);
 			if (page_mapping(page) != NULL)
 				data0 |= ((u64)1 << 32);
-			spitfire_xcall_deliver(data0,
-					       __pa(pg_addr),
-					       (u64) pg_addr,
-					       mask);
 		} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
 #ifdef DCACHE_ALIASING_POSSIBLE
-			data0 =
-				((u64)&xcall_flush_dcache_page_cheetah);
-			cheetah_xcall_deliver(data0,
-					      __pa(pg_addr),
-					      0, mask);
+			data0 =	((u64)&xcall_flush_dcache_page_cheetah);
 #endif
 		}
+		if (data0) {
+			xcall_deliver(data0, __pa(pg_addr),
+				      (u64) pg_addr, &cpumask_of_cpu(cpu));
 #ifdef CONFIG_DEBUG_DCFLUSH
-		atomic_inc(&dcpage_flushes_xcall);
+			atomic_inc(&dcpage_flushes_xcall);
 #endif
+		}
 	}
 
 	put_cpu();
@@ -924,66 +928,41 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu)
 
 void flush_dcache_page_all(struct mm_struct *mm, struct page *page)
 {
-	void *pg_addr = page_address(page);
-	cpumask_t mask = cpu_online_map;
-	u64 data0;
+	void *pg_addr;
 	int this_cpu;
+	u64 data0;
 
 	if (tlb_type == hypervisor)
 		return;
 
 	this_cpu = get_cpu();
 
-	cpu_clear(this_cpu, mask);
-
 #ifdef CONFIG_DEBUG_DCFLUSH
 	atomic_inc(&dcpage_flushes);
 #endif
-	if (cpus_empty(mask))
-		goto flush_self;
+	data0 = 0;
+	pg_addr = page_address(page);
 	if (tlb_type == spitfire) {
 		data0 = ((u64)&xcall_flush_dcache_page_spitfire);
 		if (page_mapping(page) != NULL)
 			data0 |= ((u64)1 << 32);
-		spitfire_xcall_deliver(data0,
-				       __pa(pg_addr),
-				       (u64) pg_addr,
-				       mask);
 	} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
 #ifdef DCACHE_ALIASING_POSSIBLE
 		data0 = ((u64)&xcall_flush_dcache_page_cheetah);
-		cheetah_xcall_deliver(data0,
-				      __pa(pg_addr),
-				      0, mask);
 #endif
 	}
+	if (data0) {
+		xcall_deliver(data0, __pa(pg_addr),
+			      (u64) pg_addr, &cpu_online_map);
 #ifdef CONFIG_DEBUG_DCFLUSH
-	atomic_inc(&dcpage_flushes_xcall);
+		atomic_inc(&dcpage_flushes_xcall);
 #endif
- flush_self:
+	}
 	__local_flush_dcache_page(page);
 
 	put_cpu();
 }
 
-static void __smp_receive_signal_mask(cpumask_t mask)
-{
-	smp_cross_call_masked(&xcall_receive_signal, 0, 0, 0, mask);
-}
-
-void smp_receive_signal(int cpu)
-{
-	cpumask_t mask = cpumask_of_cpu(cpu);
-
-	if (cpu_online(cpu))
-		__smp_receive_signal_mask(mask);
-}
-
-void smp_receive_signal_client(int irq, struct pt_regs *regs)
-{
-	clear_softint(1 << irq);
-}
-
 void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
 {
 	struct mm_struct *mm;
@@ -1022,17 +1001,10 @@ void kgdb_roundup_cpus(unsigned long flags)
 }
 #endif
 
-void smp_report_regs(void)
-{
-	smp_cross_call(&xcall_report_regs, 0, 0, 0);
-}
-
-#ifdef CONFIG_MAGIC_SYSRQ
 void smp_fetch_global_regs(void)
 {
 	smp_cross_call(&xcall_fetch_glob_regs, 0, 0, 0);
 }
-#endif
 
 /* We know that the window frames of the user have been flushed
  * to the stack before we get here because all callers of us
@@ -1089,7 +1061,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm)
 
 	smp_cross_call_masked(&xcall_flush_tlb_mm,
 			      ctx, 0, 0,
-			      mm->cpu_vm_mask);
+			      &mm->cpu_vm_mask);
 
 local_flush_and_out:
 	__flush_tlb_mm(ctx, SECONDARY_CONTEXT);
@@ -1107,7 +1079,7 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long
 	else
 		smp_cross_call_masked(&xcall_flush_tlb_pending,
 				      ctx, nr, (unsigned long) vaddrs,
-				      mm->cpu_vm_mask);
+				      &mm->cpu_vm_mask);
 
 	__flush_tlb_pending(ctx, nr, vaddrs);
 
@@ -1208,6 +1180,16 @@ void __devinit smp_prepare_boot_cpu(void)
 {
 }
 
+void __init smp_setup_processor_id(void)
+{
+	if (tlb_type == spitfire)
+		xcall_deliver_impl = spitfire_xcall_deliver;
+	else if (tlb_type == cheetah || tlb_type == cheetah_plus)
+		xcall_deliver_impl = cheetah_xcall_deliver;
+	else
+		xcall_deliver_impl = hypervisor_xcall_deliver;
+}
+
 void __devinit smp_fill_in_sib_core_maps(void)
 {
 	unsigned int i;
@@ -1321,10 +1303,6 @@ int __cpu_disable(void)
 	c->core_id = 0;
 	c->proc_id = -1;
 
-	spin_lock(&call_lock);
-	cpu_clear(cpu, cpu_online_map);
-	spin_unlock(&call_lock);
-
 	smp_wmb();
 
 	/* Make sure no interrupts point to this cpu.  */
@@ -1334,6 +1312,10 @@ int __cpu_disable(void)
 	mdelay(1);
 	local_irq_disable();
 
+	ipi_call_lock();
+	cpu_clear(cpu, cpu_online_map);
+	ipi_call_unlock();
+
 	return 0;
 }
 
@@ -1376,7 +1358,13 @@ void __init smp_cpus_done(unsigned int max_cpus)
 
 void smp_send_reschedule(int cpu)
 {
-	smp_receive_signal(cpu);
+	xcall_deliver((u64) &xcall_receive_signal, 0, 0,
+		      &cpumask_of_cpu(cpu));
+}
+
+void smp_receive_signal_client(int irq, struct pt_regs *regs)
+{
+	clear_softint(1 << irq);
 }
 
 /* This is a nop because we capture all other cpus
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 504e678ee12..0804f71df6c 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -68,7 +68,6 @@ extern void *__memscan_zero(void *, size_t);
 extern void *__memscan_generic(void *, int, size_t);
 extern int __memcmp(const void *, const void *, __kernel_size_t);
 extern __kernel_size_t strlen(const char *);
-extern void show_regs(struct pt_regs *);
 extern void syscall_trace(struct pt_regs *, int);
 extern void sys_sigsuspend(void);
 extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg);
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index b3e3737750d..4e21d4a57d3 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -5,10 +5,12 @@
 #include <asm/ptrace.h>
 #include <asm/stacktrace.h>
 
+#include "kstack.h"
+
 void save_stack_trace(struct stack_trace *trace)
 {
-	unsigned long ksp, fp, thread_base;
 	struct thread_info *tp = task_thread_info(current);
+	unsigned long ksp, fp;
 
 	stack_trace_flush();
 
@@ -18,21 +20,18 @@ void save_stack_trace(struct stack_trace *trace)
 	);
 
 	fp = ksp + STACK_BIAS;
-	thread_base = (unsigned long) tp;
 	do {
 		struct sparc_stackf *sf;
 		struct pt_regs *regs;
 		unsigned long pc;
 
-		/* Bogus frame pointer? */
-		if (fp < (thread_base + sizeof(struct thread_info)) ||
-		    fp >= (thread_base + THREAD_SIZE))
+		if (!kstack_valid(tp, fp))
 			break;
 
 		sf = (struct sparc_stackf *) fp;
 		regs = (struct pt_regs *) (sf + 1);
 
-		if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+		if (kstack_is_trap_frame(tp, regs)) {
 			if (!(regs->tstate & TSTATE_PRIV))
 				break;
 			pc = regs->tpc;
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 97b77fb5c50..3d118531baf 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -58,182 +58,6 @@
 #include <asm/mmu_context.h>
 #include <asm/compat_signal.h>
 
-asmlinkage long sys32_chown16(const char __user * filename, u16 user, u16 group)
-{
-	return sys_chown(filename, low2highuid(user), low2highgid(group));
-}
-
-asmlinkage long sys32_lchown16(const char __user * filename, u16 user, u16 group)
-{
-	return sys_lchown(filename, low2highuid(user), low2highgid(group));
-}
-
-asmlinkage long sys32_fchown16(unsigned int fd, u16 user, u16 group)
-{
-	return sys_fchown(fd, low2highuid(user), low2highgid(group));
-}
-
-asmlinkage long sys32_setregid16(u16 rgid, u16 egid)
-{
-	return sys_setregid(low2highgid(rgid), low2highgid(egid));
-}
-
-asmlinkage long sys32_setgid16(u16 gid)
-{
-	return sys_setgid((gid_t)gid);
-}
-
-asmlinkage long sys32_setreuid16(u16 ruid, u16 euid)
-{
-	return sys_setreuid(low2highuid(ruid), low2highuid(euid));
-}
-
-asmlinkage long sys32_setuid16(u16 uid)
-{
-	return sys_setuid((uid_t)uid);
-}
-
-asmlinkage long sys32_setresuid16(u16 ruid, u16 euid, u16 suid)
-{
-	return sys_setresuid(low2highuid(ruid), low2highuid(euid),
-		low2highuid(suid));
-}
-
-asmlinkage long sys32_getresuid16(u16 __user *ruid, u16 __user *euid, u16 __user *suid)
-{
-	int retval;
-
-	if (!(retval = put_user(high2lowuid(current->uid), ruid)) &&
-	    !(retval = put_user(high2lowuid(current->euid), euid)))
-		retval = put_user(high2lowuid(current->suid), suid);
-
-	return retval;
-}
-
-asmlinkage long sys32_setresgid16(u16 rgid, u16 egid, u16 sgid)
-{
-	return sys_setresgid(low2highgid(rgid), low2highgid(egid),
-		low2highgid(sgid));
-}
-
-asmlinkage long sys32_getresgid16(u16 __user *rgid, u16 __user *egid, u16 __user *sgid)
-{
-	int retval;
-
-	if (!(retval = put_user(high2lowgid(current->gid), rgid)) &&
-	    !(retval = put_user(high2lowgid(current->egid), egid)))
-		retval = put_user(high2lowgid(current->sgid), sgid);
-
-	return retval;
-}
-
-asmlinkage long sys32_setfsuid16(u16 uid)
-{
-	return sys_setfsuid((uid_t)uid);
-}
-
-asmlinkage long sys32_setfsgid16(u16 gid)
-{
-	return sys_setfsgid((gid_t)gid);
-}
-
-static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info)
-{
-	int i;
-	u16 group;
-
-	for (i = 0; i < group_info->ngroups; i++) {
-		group = (u16)GROUP_AT(group_info, i);
-		if (put_user(group, grouplist+i))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int groups16_from_user(struct group_info *group_info, u16 __user *grouplist)
-{
-	int i;
-	u16 group;
-
-	for (i = 0; i < group_info->ngroups; i++) {
-		if (get_user(group, grouplist+i))
-			return  -EFAULT;
-		GROUP_AT(group_info, i) = (gid_t)group;
-	}
-
-	return 0;
-}
-
-asmlinkage long sys32_getgroups16(int gidsetsize, u16 __user *grouplist)
-{
-	int i;
-
-	if (gidsetsize < 0)
-		return -EINVAL;
-
-	get_group_info(current->group_info);
-	i = current->group_info->ngroups;
-	if (gidsetsize) {
-		if (i > gidsetsize) {
-			i = -EINVAL;
-			goto out;
-		}
-		if (groups16_to_user(grouplist, current->group_info)) {
-			i = -EFAULT;
-			goto out;
-		}
-	}
-out:
-	put_group_info(current->group_info);
-	return i;
-}
-
-asmlinkage long sys32_setgroups16(int gidsetsize, u16 __user *grouplist)
-{
-	struct group_info *group_info;
-	int retval;
-
-	if (!capable(CAP_SETGID))
-		return -EPERM;
-	if ((unsigned)gidsetsize > NGROUPS_MAX)
-		return -EINVAL;
-
-	group_info = groups_alloc(gidsetsize);
-	if (!group_info)
-		return -ENOMEM;
-	retval = groups16_from_user(group_info, grouplist);
-	if (retval) {
-		put_group_info(group_info);
-		return retval;
-	}
-
-	retval = set_current_groups(group_info);
-	put_group_info(group_info);
-
-	return retval;
-}
-
-asmlinkage long sys32_getuid16(void)
-{
-	return high2lowuid(current->uid);
-}
-
-asmlinkage long sys32_geteuid16(void)
-{
-	return high2lowuid(current->euid);
-}
-
-asmlinkage long sys32_getgid16(void)
-{
-	return high2lowgid(current->gid);
-}
-
-asmlinkage long sys32_getegid16(void)
-{
-	return high2lowgid(current->egid);
-}
-
 /* 32-bit timeval and related flotsam.  */
 
 static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 1095bf4c510..0fdbf3ba956 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -20,21 +20,21 @@
 sys_call_table32:
 /*0*/	.word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link
-/*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys32_chown16, sys32_mknod
-/*15*/	.word sys_chmod, sys32_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
-/*20*/	.word sys_getpid, sys_capget, sys_capset, sys32_setuid16, sys32_getuid16
+/*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
+/*15*/	.word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
+/*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
 /*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
 	.word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile
 /*40*/	.word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid
-	.word sys32_umount, sys32_setgid16, sys32_getgid16, sys32_signal, sys32_geteuid16
-/*50*/	.word sys32_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl
+	.word sys32_umount, sys_setgid16, sys_getgid16, sys32_signal, sys_geteuid16
+/*50*/	.word sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl
 	.word sys32_reboot, sys32_mmap2, sys_symlink, sys32_readlink, sys32_execve
 /*60*/	.word sys32_umask, sys_chroot, compat_sys_newfstat, compat_sys_fstat64, sys_getpagesize
 	.word sys32_msync, sys_vfork, sys32_pread64, sys32_pwrite64, sys_geteuid
 /*70*/	.word sys_getegid, sys_mmap, sys_setreuid, sys_munmap, sys_mprotect
-	.word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys32_getgroups16
-/*80*/	.word sys32_setgroups16, sys_getpgrp, sys32_setgroups, sys32_setitimer, sys32_ftruncate64
+	.word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys_getgroups16
+/*80*/	.word sys_setgroups16, sys_getpgrp, sys32_setgroups, sys32_setitimer, sys32_ftruncate64
 	.word sys32_swapon, sys32_getitimer, sys_setuid, sys32_sethostname, sys_setgid
 /*90*/	.word sys_dup2, sys_setfsuid, compat_sys_fcntl, sys32_select, sys_setfsgid
 	.word sys_fsync, sys32_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall
@@ -42,8 +42,8 @@ sys_call_table32:
 	.word compat_sys_rt_sigtimedwait, sys32_rt_sigqueueinfo, compat_sys_rt_sigsuspend, sys_setresuid, sys_getresuid
 /*110*/	.word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
 	.word sys32_getgroups, sys32_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
-/*120*/	.word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys32_fchown16, sys_fchmod
-	.word sys_nis_syscall, sys32_setreuid16, sys32_setregid16, sys_rename, sys_truncate
+/*120*/	.word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys_fchown16, sys_fchmod
+	.word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
 /*130*/	.word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
 	.word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
 /*140*/	.word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
@@ -63,7 +63,7 @@ sys_call_table32:
 /*210*/	.word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, compat_sys_sysinfo
 	.word compat_sys_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex
 /*220*/	.word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid
-	.word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16
+	.word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys_setfsuid16, sys_setfsgid16
 /*230*/	.word sys32_select, compat_sys_time, sys32_splice, compat_sys_stime, compat_sys_statfs64
 	.word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall
 /*240*/	.word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index a0c6a97eec6..cc16fdcf98a 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -33,6 +33,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
+#include <linux/of_device.h>
 
 #include <asm/oplib.h>
 #include <asm/mostek.h>
@@ -40,7 +41,6 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/starfire.h>
 #include <asm/smp.h>
 #include <asm/sections.h>
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index bd30ecba563..c824df13f58 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -10,6 +10,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/linkage.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
@@ -39,6 +40,7 @@
 #include <asm/prom.h>
 
 #include "entry.h"
+#include "kstack.h"
 
 /* When an irrecoverable trap occurs at tl > 0, the trap entry
  * code logs the trap state registers at every level in the trap
@@ -1777,7 +1779,7 @@ static void sun4v_log_error(struct pt_regs *regs, struct sun4v_error_entry *ent,
 	       pfx,
 	       ent->err_raddr, ent->err_size, ent->err_cpu);
 
-	__show_regs(regs);
+	show_regs(regs);
 
 	if ((cnt = atomic_read(ocnt)) != 0) {
 		atomic_set(ocnt, 0);
@@ -2115,14 +2117,12 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 		struct pt_regs *regs;
 		unsigned long pc;
 
-		/* Bogus frame pointer? */
-		if (fp < (thread_base + sizeof(struct thread_info)) ||
-		    fp >= (thread_base + THREAD_SIZE))
+		if (!kstack_valid(tp, fp))
 			break;
 		sf = (struct sparc_stackf *) fp;
 		regs = (struct pt_regs *) (sf + 1);
 
-		if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+		if (kstack_is_trap_frame(tp, regs)) {
 			if (!(regs->tstate & TSTATE_PRIV))
 				break;
 			pc = regs->tpc;
@@ -2177,7 +2177,6 @@ static inline struct reg_window *kernel_stack_up(struct reg_window *rw)
 void die_if_kernel(char *str, struct pt_regs *regs)
 {
 	static int die_counter;
-	extern void smp_report_regs(void);
 	int count = 0;
 	
 	/* Amuse the user. */
@@ -2190,7 +2189,7 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 	printk("%s(%d): %s [#%d]\n", current->comm, task_pid_nr(current), str, ++die_counter);
 	notify_die(DIE_OOPS, str, regs, 0, 255, SIGSEGV);
 	__asm__ __volatile__("flushw");
-	__show_regs(regs);
+	show_regs(regs);
 	add_taint(TAINT_DIE);
 	if (regs->tstate & TSTATE_PRIV) {
 		struct reg_window *rw = (struct reg_window *)
@@ -2215,11 +2214,6 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		}
 		user_instruction_dump ((unsigned int __user *) regs->tpc);
 	}
-#if 0
-#ifdef CONFIG_SMP
-	smp_report_regs();
-#endif
-#endif                                                	
 	if (regs->tstate & TSTATE_PRIV)
 		do_exit(SIGKILL);
 	do_exit(SIGSEGV);
@@ -2460,7 +2454,7 @@ struct trap_per_cpu trap_block[NR_CPUS];
 /* This can get invoked before sched_init() so play it super safe
  * and use hard_smp_processor_id().
  */
-void init_cur_cpu_trap(struct thread_info *t)
+void notrace init_cur_cpu_trap(struct thread_info *t)
 {
 	int cpu = hard_smp_processor_id();
 	struct trap_per_cpu *p = &trap_block[cpu];
diff --git a/arch/sparc64/lib/mcount.S b/arch/sparc64/lib/mcount.S
index 7735a7a6053..fad90ddb3a2 100644
--- a/arch/sparc64/lib/mcount.S
+++ b/arch/sparc64/lib/mcount.S
@@ -48,12 +48,45 @@ mcount:
 	sub		%g3, STACK_BIAS, %g3
 	cmp		%sp, %g3
 	bg,pt		%xcc, 1f
-	 sethi		%hi(panicstring), %g3
+	 nop
+	lduh		[%g6 + TI_CPU], %g1
+	sethi		%hi(hardirq_stack), %g3
+	or		%g3, %lo(hardirq_stack), %g3
+	sllx		%g1, 3, %g1
+	ldx		[%g3 + %g1], %g7
+	sub		%g7, STACK_BIAS, %g7
+	cmp		%sp, %g7
+	bleu,pt		%xcc, 2f
+	 sethi		%hi(THREAD_SIZE), %g3
+	add		%g7, %g3, %g7
+	cmp		%sp, %g7
+	blu,pn		%xcc, 1f
+2:	 sethi		%hi(softirq_stack), %g3
+	or		%g3, %lo(softirq_stack), %g3
+	ldx		[%g3 + %g1], %g7
+	cmp		%sp, %g7
+	bleu,pt		%xcc, 2f
+	 sethi		%hi(THREAD_SIZE), %g3
+	add		%g7, %g3, %g7
+	cmp		%sp, %g7
+	blu,pn		%xcc, 1f
+	 nop
+	/* If we are already on ovstack, don't hop onto it
+	 * again, we are already trying to output the stack overflow
+	 * message.
+	 */
 	sethi		%hi(ovstack), %g7		! cant move to panic stack fast enough
 	 or		%g7, %lo(ovstack), %g7
-	add		%g7, OVSTACKSIZE, %g7
+	add		%g7, OVSTACKSIZE, %g3
+	sub		%g3, STACK_BIAS + 192, %g3
 	sub		%g7, STACK_BIAS, %g7
-	mov		%g7, %sp
+	cmp		%sp, %g7
+	blu,pn		%xcc, 2f
+	 cmp		%sp, %g3
+	bleu,pn		%xcc, 1f
+	 nop
+2:	mov		%g3, %sp
+	sethi		%hi(panicstring), %g3
 	call		prom_printf
 	 or		%g3, %lo(panicstring), %o0
 	call		prom_halt
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 4e821b3ecb0..a41df7bef03 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -49,6 +49,7 @@
 #include <asm/sstate.h>
 #include <asm/mdesc.h>
 #include <asm/cpudata.h>
+#include <asm/irq.h>
 
 #define MAX_PHYS_ADDRESS	(1UL << 42UL)
 #define KPTE_BITMAP_CHUNK_SZ	(256UL * 1024UL * 1024UL)
@@ -795,6 +796,9 @@ static unsigned long nid_range(unsigned long start, unsigned long end,
 		start += PAGE_SIZE;
 	}
 
+	if (start > end)
+		start = end;
+
 	return start;
 }
 #else
@@ -1722,8 +1726,7 @@ void __init paging_init(void)
 
 	find_ramdisk(phys_base);
 
-	if (cmdline_memory_size)
-		lmb_enforce_memory_limit(phys_base + cmdline_memory_size);
+	lmb_enforce_memory_limit(cmdline_memory_size);
 
 	lmb_analyze();
 	lmb_dump_all();
@@ -1771,6 +1774,16 @@ void __init paging_init(void)
 	if (tlb_type == hypervisor)
 		sun4v_mdesc_init();
 
+	/* Once the OF device tree and MDESC have been setup, we know
+	 * the list of possible cpus.  Therefore we can allocate the
+	 * IRQ stacks.
+	 */
+	for_each_possible_cpu(i) {
+		/* XXX Use node local allocations... XXX */
+		softirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		hardirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+	}
+
 	/* Setup bootmem... */
 	last_valid_pfn = end_pfn = bootmem_init(phys_base);
 
@@ -1830,7 +1843,7 @@ static int pavail_rescan_ents __initdata;
  * memory list again, and make sure it provides at least as much
  * memory as 'pavail' does.
  */
-static void setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(void)
 {
 	int i;
 
@@ -1950,6 +1963,15 @@ void __init mem_init(void)
 void free_initmem(void)
 {
 	unsigned long addr, initend;
+	int do_free = 1;
+
+	/* If the physical memory maps were trimmed by kernel command
+	 * line options, don't even try freeing this initmem stuff up.
+	 * The kernel image could have been in the trimmed out region
+	 * and if so the freeing below will free invalid page structs.
+	 */
+	if (cmdline_memory_size)
+		do_free = 0;
 
 	/*
 	 * The init section is aligned to 8k in vmlinux.lds. Page align for >8k pagesizes.
@@ -1964,13 +1986,16 @@ void free_initmem(void)
 			((unsigned long) __va(kern_base)) -
 			((unsigned long) KERNBASE));
 		memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
-		p = virt_to_page(page);
 
-		ClearPageReserved(p);
-		init_page_count(p);
-		__free_page(p);
-		num_physpages++;
-		totalram_pages++;
+		if (do_free) {
+			p = virt_to_page(page);
+
+			ClearPageReserved(p);
+			init_page_count(p);
+			__free_page(p);
+			num_physpages++;
+			totalram_pages++;
+		}
 	}
 }
 
diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c
index 3547937b17a..587f8efb2e0 100644
--- a/arch/sparc64/mm/tsb.c
+++ b/arch/sparc64/mm/tsb.c
@@ -1,9 +1,10 @@
 /* arch/sparc64/mm/tsb.c
  *
- * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2006, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
+#include <linux/preempt.h>
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/tlbflush.h>
@@ -415,7 +416,9 @@ retry_tsb_alloc:
 		tsb_context_switch(mm);
 
 		/* Now force other processors to do the same.  */
+		preempt_disable();
 		smp_tsb_sync(mm);
+		preempt_enable();
 
 		/* Now it is safe to free the old tsb.  */
 		kmem_cache_free(tsb_caches[old_cache_index], old_tsb);
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 4c8ca131ffa..86773e89dc1 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -480,42 +480,6 @@ xcall_sync_tick:
 	b		rtrap_xcall
 	 ldx		[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
 
-	/* NOTE: This is SPECIAL!!  We do etrap/rtrap however
-	 *       we choose to deal with the "BH's run with
-	 *       %pil==15" problem (described in asm/pil.h)
-	 *       by just invoking rtrap directly past where
-	 *       BH's are checked for.
-	 *
-	 *       We do it like this because we do not want %pil==15
-	 *       lockups to prevent regs being reported.
-	 */
-	.globl		xcall_report_regs
-xcall_report_regs:
-
-661:	rdpr		%pstate, %g2
-	wrpr		%g2, PSTATE_IG | PSTATE_AG, %pstate
-	.section	.sun4v_2insn_patch, "ax"
-	.word		661b
-	nop
-	nop
-	.previous
-
-	rdpr		%pil, %g2
-	wrpr		%g0, 15, %pil
-	sethi		%hi(109f), %g7
-	b,pt		%xcc, etrap_irq
-109:	 or		%g7, %lo(109b), %g7
-#ifdef CONFIG_TRACE_IRQFLAGS
-	call		trace_hardirqs_off
-	 nop
-#endif
-	call		__show_regs
-	 add		%sp, PTREGS_OFF, %o0
-	/* Has to be a non-v9 branch due to the large distance. */
-	b		rtrap_xcall
-	 ldx		[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
-
-#ifdef CONFIG_MAGIC_SYSRQ
 	.globl		xcall_fetch_glob_regs
 xcall_fetch_glob_regs:
 	sethi		%hi(global_reg_snapshot), %g1
@@ -531,6 +495,13 @@ xcall_fetch_glob_regs:
 	stx		%g7, [%g1 + GR_SNAP_TNPC]
 	stx		%o7, [%g1 + GR_SNAP_O7]
 	stx		%i7, [%g1 + GR_SNAP_I7]
+	/* Don't try this at home kids... */
+	rdpr		%cwp, %g2
+	sub		%g2, 1, %g7
+	wrpr		%g7, %cwp
+	mov		%i7, %g7
+	wrpr		%g2, %cwp
+	stx		%g7, [%g1 + GR_SNAP_RPC]
 	sethi		%hi(trap_block), %g7
 	or		%g7, %lo(trap_block), %g7
 	sllx		%g2, TRAP_BLOCK_SZ_SHIFT, %g2
@@ -539,7 +510,6 @@ xcall_fetch_glob_regs:
 	membar		#StoreStore
 	stx		%g3, [%g1 + GR_SNAP_THREAD]
 	retry
-#endif /* CONFIG_MAGIC_SYSRQ */
 
 #ifdef DCACHE_ALIASING_POSSIBLE
 	.align		32
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 5047490fc29..d741f35d7b3 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -362,19 +362,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data)
 	if (tty == NULL)
 		return IRQ_NONE;
 
-	if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) &&
-	   (tty->ldisc.write_wakeup != NULL))
-		(tty->ldisc.write_wakeup)(tty);
-
-	/*
-	 * BLOCKING mode
-	 * In blocking mode, everything sleeps on tty->write_wait.
-	 * Sleeping in the console driver would break non-blocking
-	 * writes.
-	 */
-
-	if (waitqueue_active(&tty->write_wait))
-		wake_up_interruptible(&tty->write_wait);
+	tty_wakeup(tty);
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2e608095135..99516550935 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -22,7 +22,6 @@ config X86
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_IOREMAP_PROT
-	select HAVE_GET_USER_PAGES_FAST
 	select HAVE_KPROBES
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_KRETPROBES
@@ -578,35 +577,29 @@ config SWIOTLB
 
 config IOMMU_HELPER
 	def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+
 config MAXSMP
 	bool "Configure Maximum number of SMP Processors and NUMA Nodes"
-	depends on X86_64 && SMP
+	depends on X86_64 && SMP && BROKEN
 	default n
 	help
 	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
 	  If unsure, say N.
 
-if MAXSMP
-config NR_CPUS
-	int
-	default "4096"
-endif
-
-if !MAXSMP
 config NR_CPUS
-	int "Maximum number of CPUs (2-4096)"
-	range 2 4096
+	int "Maximum number of CPUs (2-512)" if !MAXSMP
+	range 2 512
 	depends on SMP
+	default "4096" if MAXSMP
 	default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
 	default "8"
 	help
 	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support.  The maximum supported value is 4096 and the
+	  kernel will support.  The maximum supported value is 512 and the
 	  minimum value which makes sense is 2.
 
 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.
-endif
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
@@ -974,9 +967,9 @@ config NUMA
 	  local memory controller of the CPU and add some more
 	  NUMA awareness to the kernel.
 
-	  For i386 this is currently highly experimental and should be only
+	  For 32-bit this is currently highly experimental and should be only
 	  used for kernel development. It might also cause boot failures.
-	  For x86_64 this is recommended on all multiprocessor Opteron systems.
+	  For 64-bit this is recommended on all multiprocessor Opteron systems.
 	  If the system is EM64T, you should say N unless your system is
 	  EM64T NUMA.
 
@@ -1019,17 +1012,10 @@ config NUMA_EMU
 	  into virtual nodes when booted with "numa=fake=N", where N is the
 	  number of nodes. This is only useful for debugging.
 
-if MAXSMP
-
 config NODES_SHIFT
-	int
-	default "9"
-endif
-
-if !MAXSMP
-config NODES_SHIFT
-	int "Maximum NUMA Nodes (as a power of 2)"
+	int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
 	range 1 9   if X86_64
+	default "9" if MAXSMP
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"
@@ -1037,7 +1023,6 @@ config NODES_SHIFT
 	help
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accomodate various tables.
-endif
 
 config HAVE_ARCH_BOOTMEM_NODE
 	def_bool y
@@ -1286,7 +1271,7 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	bool "kernel crash dumps (EXPERIMENTAL)"
+	bool "kernel crash dumps"
 	depends on X86_64 || (X86_32 && HIGHMEM)
 	help
 	  Generate crash dump after being started by kexec.
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 2c518fbc52e..b225219c448 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -382,14 +382,17 @@ config X86_OOSTORE
 # P6_NOPs are a relatively minor optimization that require a family >=
 # 6 processor, except that it is broken on certain VIA chips.
 # Furthermore, AMD chips prefer a totally different sequence of NOPs
-# (which work on all CPUs).  As a result, disallow these if we're
-# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
-# x86-64 capable chips); the list of processors in the right-hand clause
-# are the cores that benefit from this optimization.
+# (which work on all CPUs).  In addition, it looks like Virtual PC
+# does not understand them.
+#
+# As a result, disallow these if we're not compiling for X86_64 (these
+# NOPs do work on all x86-64 capable chips); the list of processors in
+# the right-hand clause are the cores that benefit from this optimization.
 #
 config X86_P6_NOP
 	def_bool y
-	depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
+	depends on X86_64
+	depends on (MCORE2 || MPENTIUM4 || MPSC)
 
 config X86_TSC
 	def_bool y
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index a34b9982c7c..cc0ef13fba7 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -24,10 +24,14 @@
 #include <linux/edd.h>
 #include <asm/boot.h>
 #include <asm/setup.h>
+#include "bitops.h"
+#include <asm/cpufeature.h>
 
 /* Useful macros */
 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
 
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
+
 extern struct setup_header hdr;
 extern struct boot_params boot_params;
 
@@ -242,6 +246,12 @@ int cmdline_find_option(const char *option, char *buffer, int bufsize);
 int cmdline_find_option_bool(const char *option);
 
 /* cpu.c, cpucheck.c */
+struct cpu_features {
+	int level;		/* Family, or 64 for x86-64 */
+	int model;
+	u32 flags[NCAPINTS];
+};
+extern struct cpu_features cpu;
 int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);
 int validate_cpu(void);
 
diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c
index 92d6fd73dc7..75298fe2edc 100644
--- a/arch/x86/boot/cpu.c
+++ b/arch/x86/boot/cpu.c
@@ -16,9 +16,6 @@
  */
 
 #include "boot.h"
-#include "bitops.h"
-#include <asm/cpufeature.h>
-
 #include "cpustr.h"
 
 static char *cpu_name(int level)
diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index 7804389ee00..4d3ff037201 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -22,21 +22,13 @@
 
 #ifdef _SETUP
 # include "boot.h"
-# include "bitops.h"
 #endif
 #include <linux/types.h>
-#include <asm/cpufeature.h>
 #include <asm/processor-flags.h>
 #include <asm/required-features.h>
 #include <asm/msr-index.h>
 
-struct cpu_features {
-	int level;		/* Family, or 64 for x86-64 */
-	int model;
-	u32 flags[NCAPINTS];
-};
-
-static struct cpu_features cpu;
+struct cpu_features cpu;
 static u32 cpu_vendor[3];
 static u32 err_flags[NCAPINTS];
 
@@ -46,12 +38,12 @@ static const u32 req_flags[NCAPINTS] =
 {
 	REQUIRED_MASK0,
 	REQUIRED_MASK1,
-	REQUIRED_MASK2,
-	REQUIRED_MASK3,
+	0, /* REQUIRED_MASK2 not implemented in this file */
+	0, /* REQUIRED_MASK3 not implemented in this file */
 	REQUIRED_MASK4,
-	REQUIRED_MASK5,
+	0, /* REQUIRED_MASK5 not implemented in this file */
 	REQUIRED_MASK6,
-	REQUIRED_MASK7,
+	0, /* REQUIRED_MASK7 not implemented in this file */
 };
 
 #define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index 2296164b54d..197421db1af 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -73,6 +73,11 @@ static void keyboard_set_repeat(void)
  */
 static void query_ist(void)
 {
+	/* Some older BIOSes apparently crash on this call, so filter
+	   it from machines too old to have SpeedStep at all. */
+	if (cpu.level < 6)
+		return;
+
 	asm("int $0x15"
 	    : "=a" (boot_params.ist_info.signature),
 	      "=b" (boot_params.ist_info.command),
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index 53165c97336..8c3c25f3557 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -13,7 +13,6 @@
  */
 
 #include "boot.h"
-#include <linux/kernel.h>
 
 #define SMAP	0x534d4150	/* ASCII "SMAP" */
 
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 4d73f53287b..104275e191a 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May  4 19:59:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 15:04:00 2008
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
 # CONFIG_X86_64 is not set
 CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
 # CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -132,27 +134,35 @@ CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -176,19 +186,17 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
 # CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
 # CONFIG_X86_VSMP is not set
+# CONFIG_X86_RDC321X is not set
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
 # CONFIG_M486 is not set
 # CONFIG_M586 is not set
@@ -215,21 +223,19 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_MPSC is not set
 CONFIG_MCORE2=y
 # CONFIG_GENERIC_CPU is not set
-# CONFIG_X86_GENERIC is not set
+CONFIG_X86_GENERIC=y
 CONFIG_X86_CPU=y
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
 CONFIG_X86_XADD=y
 CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INVLPG=y
 CONFIG_X86_BSWAP=y
 CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=6
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
 CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
@@ -247,7 +253,7 @@ CONFIG_X86_IO_APIC=y
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
+CONFIG_X86_REBOOTFIXUPS=y
 # CONFIG_MICROCODE is not set
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
@@ -256,32 +262,28 @@ CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
-CONFIG_NEED_NODE_MEMMAP_SIZE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_MTRR=y
-# CONFIG_X86_PAT is not set
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_X86_PAT=y
 CONFIG_EFI=y
 # CONFIG_IRQBALANCE is not set
 CONFIG_SECCOMP=y
@@ -293,6 +295,7 @@ CONFIG_HZ=1000
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 CONFIG_RELOCATABLE=y
 CONFIG_PHYSICAL_ALIGN=0x200000
@@ -312,6 +315,7 @@ CONFIG_PM_TRACE_RTC=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -337,6 +341,7 @@ CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
@@ -395,8 +400,8 @@ CONFIG_PCI=y
 # CONFIG_PCI_GOBIOS is not set
 # CONFIG_PCI_GOMMCONFIG is not set
 # CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
 # CONFIG_PCI_GOOLPC is not set
+CONFIG_PCI_GOANY=y
 CONFIG_PCI_BIOS=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
@@ -448,10 +453,6 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -475,7 +476,10 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
@@ -618,7 +622,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -680,28 +683,19 @@ CONFIG_FIB_RULES=y
 CONFIG_CFG80211=y
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -717,6 +711,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
@@ -749,6 +745,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
@@ -760,10 +757,12 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_FUJITSU_LAPTOP is not set
 # CONFIG_TC1100_WMI is not set
 # CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
 # CONFIG_INTEL_MENLOW is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -802,12 +801,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -842,7 +842,7 @@ CONFIG_PATA_AMD=y
 # CONFIG_PATA_CS5536 is not set
 # CONFIG_PATA_CYPRESS is not set
 # CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
+CONFIG_ATA_GENERIC=y
 # CONFIG_PATA_HPT366 is not set
 # CONFIG_PATA_HPT37X is not set
 # CONFIG_PATA_HPT3X2N is not set
@@ -852,7 +852,7 @@ CONFIG_PATA_AMD=y
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
+CONFIG_PATA_MPIIX=y
 CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_NETCELL is not set
 # CONFIG_PATA_NINJA32 is not set
@@ -871,6 +871,7 @@ CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -894,13 +895,16 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -910,7 +914,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -943,10 +963,10 @@ CONFIG_FORCEDETH=y
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
+CONFIG_NE2K_PCI=y
 # CONFIG_8139CP is not set
 CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
@@ -961,25 +981,24 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
+CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 CONFIG_SKY2=y
 # CONFIG_SKY2_DEBUG is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -1019,13 +1038,14 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
@@ -1105,6 +1125,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -1139,12 +1160,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1173,6 +1196,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1223,8 +1247,8 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
 CONFIG_HW_RANDOM_GEODE=y
 CONFIG_HW_RANDOM_VIA=y
 CONFIG_NVRAM=y
@@ -1245,7 +1269,6 @@ CONFIG_NVRAM=y
 # CONFIG_CS5535_GPIO is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 # CONFIG_HPET_MMAP is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
@@ -1254,43 +1277,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_SCx200_ACB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1299,6 +1343,8 @@ CONFIG_I2C_I801=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1360,8 +1406,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1372,6 +1420,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1418,7 +1467,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1463,6 +1511,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1470,6 +1519,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
 
 #
 # Display device support
@@ -1489,15 +1539,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1515,20 +1557,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_PCSP is not set
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1603,36 +1639,14 @@ CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1668,6 +1682,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1691,6 +1706,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1712,6 +1728,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1720,7 +1737,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1733,7 +1749,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1750,6 +1765,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1759,7 +1775,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1805,6 +1823,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1837,11 +1856,13 @@ CONFIG_DMADEVICES=y
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
 
 #
 # File systems
@@ -1920,14 +1941,27 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -2001,9 +2035,9 @@ CONFIG_NLS_UTF8=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -2033,6 +2067,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -2043,23 +2078,32 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
 # CONFIG_4KSTACKS is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
 CONFIG_DOUBLEFAULT=y
+# CONFIG_MMIOTRACE is not set
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2071,6 +2115,7 @@ CONFIG_IO_DELAY_0X80=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=0
 CONFIG_DEBUG_BOOT_PARAMS=y
 # CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
 
 #
 # Security options
@@ -2080,7 +2125,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2141,6 +2185,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -2151,7 +2199,7 @@ CONFIG_CRYPTO_SHA1=y
 # Ciphers
 #
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
+CONFIG_CRYPTO_AES_586=y
 # CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -2193,6 +2241,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index a4045242962..678c8acefe0 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May  4 19:59:57 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 14:40:46 2008
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
 CONFIG_X86_64=y
 CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
 # CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 # CONFIG_KTIME_SCALAR is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -132,25 +134,33 @@ CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -175,20 +185,15 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
 # CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
 # CONFIG_X86_VSMP is not set
 # CONFIG_PARAVIRT_GUEST is not set
-CONFIG_MEMTEST_BOOTPARAM=y
-CONFIG_MEMTEST_BOOTPARAM_VALUE=0
+# CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
 # CONFIG_M486 is not set
 # CONFIG_M586 is not set
@@ -220,11 +225,12 @@ CONFIG_X86_L1_CACHE_BYTES=64
 CONFIG_X86_INTERNODE_CACHE_BYTES=64
 CONFIG_X86_CMPXCHG=y
 CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_GOOD_APIC=y
+CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
 CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CMOV=y
 CONFIG_X86_MINIMUM_CPU_FAMILY=64
 CONFIG_X86_DEBUGCTLMSR=y
@@ -234,8 +240,10 @@ CONFIG_DMI=y
 CONFIG_GART_IOMMU=y
 CONFIG_CALGARY_IOMMU=y
 CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_AMD_IOMMU=y
 CONFIG_SWIOTLB=y
 CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
 CONFIG_NR_CPUS=4
 # CONFIG_SCHED_SMT is not set
 CONFIG_SCHED_MC=y
@@ -281,6 +289,7 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_MTRR=y
+# CONFIG_MTRR_SANITIZER is not set
 # CONFIG_X86_PAT is not set
 CONFIG_EFI=y
 CONFIG_SECCOMP=y
@@ -313,6 +322,7 @@ CONFIG_PM_TRACE_RTC=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -339,6 +349,7 @@ CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
@@ -437,10 +448,6 @@ CONFIG_IA32_EMULATION=y
 CONFIG_COMPAT=y
 CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
 CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -464,7 +471,10 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
@@ -607,7 +617,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -669,28 +678,19 @@ CONFIG_FIB_RULES=y
 CONFIG_CFG80211=y
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -706,6 +706,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
@@ -738,6 +740,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
@@ -748,10 +751,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ASUS_LAPTOP is not set
 # CONFIG_FUJITSU_LAPTOP is not set
 # CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
 # CONFIG_INTEL_MENLOW is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_SGI_XP is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_SGI_GRU is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -790,12 +797,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -857,6 +865,7 @@ CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -880,13 +889,16 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -896,7 +908,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -940,16 +968,15 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -965,6 +992,7 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -1003,13 +1031,14 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
@@ -1088,6 +1117,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -1122,12 +1152,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1155,6 +1187,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1222,7 +1255,6 @@ CONFIG_NVRAM=y
 # CONFIG_PC8736x_GPIO is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 # CONFIG_HPET_MMAP is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
@@ -1231,42 +1263,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1275,6 +1328,8 @@ CONFIG_I2C_I801=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1335,8 +1390,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1347,6 +1404,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1387,7 +1445,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1430,6 +1487,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1437,6 +1495,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
 
 #
 # Display device support
@@ -1456,15 +1515,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1482,20 +1533,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_PCSP is not set
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1568,36 +1613,14 @@ CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1633,6 +1656,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1656,6 +1680,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1677,6 +1702,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1685,7 +1711,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1698,7 +1723,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1715,6 +1739,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1724,7 +1749,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1770,6 +1797,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1802,11 +1830,13 @@ CONFIG_DMADEVICES=y
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
 
 #
 # File systems
@@ -1886,14 +1916,27 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -1967,9 +2010,9 @@ CONFIG_NLS_UTF8=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1998,6 +2041,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -2008,11 +2052,20 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
@@ -2023,8 +2076,8 @@ CONFIG_DEBUG_RODATA=y
 # CONFIG_DIRECT_GBPAGES is not set
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
-CONFIG_X86_MPPARSE=y
 # CONFIG_IOMMU_DEBUG is not set
+# CONFIG_MMIOTRACE is not set
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2036,6 +2089,7 @@ CONFIG_IO_DELAY_0X80=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=0
 CONFIG_DEBUG_BOOT_PARAMS=y
 # CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
 
 #
 # Security options
@@ -2045,7 +2099,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2106,6 +2159,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -2155,6 +2212,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index fa88a1d7129..bfd10fd211c 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -97,6 +97,8 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 #warning ACPI uses CMPXCHG, i486 and later hardware
 #endif
 
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
 /* --------------------------------------------------------------------------
                               Boot-time Configuration
    -------------------------------------------------------------------------- */
@@ -158,6 +160,14 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 struct acpi_mcfg_allocation *pci_mmcfg_config;
 int pci_mmcfg_config_num;
 
+static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
+{
+	if (!strcmp(mcfg->header.oem_id, "SGI"))
+		acpi_mcfg_64bit_base_addr = TRUE;
+
+	return 0;
+}
+
 int __init acpi_parse_mcfg(struct acpi_table_header *header)
 {
 	struct acpi_table_mcfg *mcfg;
@@ -190,8 +200,12 @@ int __init acpi_parse_mcfg(struct acpi_table_header *header)
 	}
 
 	memcpy(pci_mmcfg_config, &mcfg[1], config_size);
+
+	acpi_mcfg_oem_check(mcfg);
+
 	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		if (pci_mmcfg_config[i].address > 0xFFFFFFFF) {
+		if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
+		    !acpi_mcfg_64bit_base_addr) {
 			printk(KERN_ERR PREFIX
 			       "MMCONFIG not in low 4GB of memory\n");
 			kfree(pci_mmcfg_config);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index fa2161d5003..426e5d91b63 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -20,7 +20,7 @@ unsigned long acpi_realmode_flags;
 /* address in low memory of the wakeup routine. */
 static unsigned long acpi_realmode;
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
 static char temp_stack[10240];
 #endif
 
@@ -86,7 +86,7 @@ int acpi_save_state_mem(void)
 #endif /* !CONFIG_64BIT */
 
 	header->pmode_cr0 = read_cr0();
-	header->pmode_cr4 = read_cr4();
+	header->pmode_cr4 = read_cr4_safe();
 	header->realmode_flags = acpi_realmode_flags;
 	header->real_magic = 0x12345678;
 
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 2763cb37b55..65a0c1b4869 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -145,35 +145,25 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 extern char __vsyscall_0;
 const unsigned char *const *find_nop_table(void)
 {
-	return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
-	       boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+	    boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return k8_nops;
 }
 
 #else /* CONFIG_X86_64 */
 
-static const struct nop {
-	int cpuid;
-	const unsigned char *const *noptable;
-} noptypes[] = {
-	{ X86_FEATURE_K8, k8_nops },
-	{ X86_FEATURE_K7, k7_nops },
-	{ X86_FEATURE_P4, p6_nops },
-	{ X86_FEATURE_P3, p6_nops },
-	{ -1, NULL }
-};
-
 const unsigned char *const *find_nop_table(void)
 {
-	const unsigned char *const *noptable = intel_nops;
-	int i;
-
-	for (i = 0; noptypes[i].cpuid >= 0; i++) {
-		if (boot_cpu_has(noptypes[i].cpuid)) {
-			noptable = noptypes[i].noptable;
-			break;
-		}
-	}
-	return noptable;
+	if (boot_cpu_has(X86_FEATURE_K8))
+		return k8_nops;
+	else if (boot_cpu_has(X86_FEATURE_K7))
+		return k7_nops;
+	else if (boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return intel_nops;
 }
 
 #endif /* CONFIG_X86_64 */
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 22d7d050905..69b4d060b21 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -65,7 +65,7 @@ static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 	u8 *target;
 
 	tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
-	target = (iommu->cmd_buf + tail);
+	target = iommu->cmd_buf + tail;
 	memcpy_toio(target, cmd, sizeof(*cmd));
 	tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
 	head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
@@ -101,16 +101,13 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
  */
 static int iommu_completion_wait(struct amd_iommu *iommu)
 {
-	int ret;
+	int ret, ready = 0;
+	unsigned status = 0;
 	struct iommu_cmd cmd;
-	volatile u64 ready = 0;
-	unsigned long ready_phys = virt_to_phys(&ready);
 	unsigned long i = 0;
 
 	memset(&cmd, 0, sizeof(cmd));
-	cmd.data[0] = LOW_U32(ready_phys) | CMD_COMPL_WAIT_STORE_MASK;
-	cmd.data[1] = upper_32_bits(ready_phys);
-	cmd.data[2] = 1; /* value written to 'ready' */
+	cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
 	CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
 
 	iommu->need_sync = 0;
@@ -122,9 +119,15 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 
 	while (!ready && (i < EXIT_LOOP_COUNT)) {
 		++i;
-		cpu_relax();
+		/* wait for the bit to become one */
+		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
+		ready = status & MMIO_STATUS_COM_WAIT_INT_MASK;
 	}
 
+	/* set bit back to zero */
+	status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
+	writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
+
 	if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
 		printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
 
@@ -161,7 +164,7 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
 	address &= PAGE_MASK;
 	CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES);
 	cmd.data[1] |= domid;
-	cmd.data[2] = LOW_U32(address);
+	cmd.data[2] = lower_32_bits(address);
 	cmd.data[3] = upper_32_bits(address);
 	if (s) /* size bit - we flush more than one 4kb page */
 		cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index d9a9da597e7..a69cc0f5204 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -801,6 +801,21 @@ static int __init init_memory_definitions(struct acpi_table_header *table)
 }
 
 /*
+ * Init the device table to not allow DMA access for devices and
+ * suppress all page faults
+ */
+static void init_device_table(void)
+{
+	u16 devid;
+
+	for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
+		set_dev_entry_bit(devid, DEV_ENTRY_VALID);
+		set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION);
+		set_dev_entry_bit(devid, DEV_ENTRY_NO_PAGE_FAULT);
+	}
+}
+
+/*
  * This function finally enables all IOMMUs found in the system after
  * they have been initialized
  */
@@ -931,6 +946,9 @@ int __init amd_iommu_init(void)
 	if (amd_iommu_pd_alloc_bitmap == NULL)
 		goto free;
 
+	/* init the device table */
+	init_device_table();
+
 	/*
 	 * let all alias entries point to itself
 	 */
@@ -954,15 +972,15 @@ int __init amd_iommu_init(void)
 	if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
 		goto free;
 
-	ret = amd_iommu_init_dma_ops();
+	ret = sysdev_class_register(&amd_iommu_sysdev_class);
 	if (ret)
 		goto free;
 
-	ret = sysdev_class_register(&amd_iommu_sysdev_class);
+	ret = sysdev_register(&device_amd_iommu);
 	if (ret)
 		goto free;
 
-	ret = sysdev_register(&device_amd_iommu);
+	ret = amd_iommu_init_dma_ops();
 	if (ret)
 		goto free;
 
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index d6c89835837..f88bd0d982b 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -1454,8 +1454,6 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	}
 }
 
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
-
 void __cpuinit generic_processor_info(int apicid, int version)
 {
 	int cpu;
@@ -1482,12 +1480,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		return;
 	}
 
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-			" Processor ignored.\n", maxcpus);
-		return;
-	}
-
 	num_processors++;
 	cpus_complement(tmp_map, cpu_present_map);
 	cpu = first_cpu(tmp_map);
@@ -1720,15 +1712,19 @@ static int __init parse_lapic_timer_c2_ok(char *arg)
 }
 early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
 
-static int __init apic_set_verbosity(char *str)
+static int __init apic_set_verbosity(char *arg)
 {
-	if (strcmp("debug", str) == 0)
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp(arg, "debug") == 0)
 		apic_verbosity = APIC_DEBUG;
-	else if (strcmp("verbose", str) == 0)
+	else if (strcmp(arg, "verbose") == 0)
 		apic_verbosity = APIC_VERBOSE;
-	return 1;
+
+	return 0;
 }
-__setup("apic=", apic_set_verbosity);
+early_param("apic", apic_set_verbosity);
 
 static int __init lapic_insert_resource(void)
 {
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 7f1f030da7e..446c062e831 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -90,7 +90,6 @@ static unsigned long apic_phys;
 
 unsigned long mp_lapic_addr;
 
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
 /*
  * Get the LAPIC version
  */
@@ -1062,12 +1061,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		return;
 	}
 
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-		       " Processor ignored.\n", maxcpus);
-		return;
-	}
-
 	num_processors++;
 	cpus_complement(tmp_map, cpu_present_map);
 	cpu = first_cpu(tmp_map);
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 84a8220a607..a6ef672adbb 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -56,9 +56,22 @@ void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
 
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
-		if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+		/*
+		 * There is a known erratum on Pentium III and Core Solo
+		 * and Core Duo CPUs.
+		 * " Page with PAT set to WC while associated MTRR is UC
+		 *   may consolidate to UC "
+		 * Because of this erratum, it is better to stick with
+		 * setting WC in MTRR rather than using PAT on these CPUs.
+		 *
+		 * Enable PAT WC only on P4, Core 2 or later CPUs.
+		 */
+		if (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 15))
 			return;
-		break;
+
+		pat_disable("PAT WC disabled due to known CPU erratum.");
+		return;
+
 	case X86_VENDOR_AMD:
 	case X86_VENDOR_CENTAUR:
 	case X86_VENDOR_TRANSMETA:
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index cae9cabc303..18514ed2610 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -31,6 +31,11 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 		if (c->x86_power & (1<<8))
 			set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 	}
+
+	/*  Set MTRR capability flag if appropriate */
+	if (c->x86_model == 13 || c->x86_model == 9 ||
+	   (c->x86_model == 8 && c->x86_mask >= 8))
+		set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
@@ -166,10 +171,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 						mbytes);
 				}
 
-				/*  Set MTRR capability flag if appropriate */
-				if (c->x86_model == 13 || c->x86_model == 9 ||
-				   (c->x86_model == 8 && c->x86_mask >= 8))
-					set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 				break;
 			}
 
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index c9b58a806e8..c8e315f1aa8 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -50,6 +50,8 @@ static double __initdata y = 3145727.0;
  */
 static void __init check_fpu(void)
 {
+	s32 fdiv_bug;
+
 	if (!boot_cpu_data.hard_math) {
 #ifndef CONFIG_MATH_EMULATION
 		printk(KERN_EMERG "No coprocessor found and no math emulation present.\n");
@@ -74,8 +76,10 @@ static void __init check_fpu(void)
 		"fistpl %0\n\t"
 		"fwait\n\t"
 		"fninit"
-		: "=m" (*&boot_cpu_data.fdiv_bug)
+		: "=m" (*&fdiv_bug)
 		: "m" (*&x), "m" (*&y));
+
+	boot_cpu_data.fdiv_bug = fdiv_bug;
 	if (boot_cpu_data.fdiv_bug)
 		printk("Hmm, FPU with FDIV bug.\n");
 }
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index e0f45edd6a5..a0534c04d38 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -314,6 +314,16 @@ enum {
 		EAMD3D		= 1<<20,
 };
 
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+	switch (c->x86) {
+	case 5:
+		/* Emulate MTRRs using Centaur's MCR. */
+		set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+		break;
+	}
+}
+
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
 
@@ -462,6 +472,7 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Centaur",
 	.c_ident	= { "CentaurHauls" },
+	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
 	.c_size_cache	= centaur_size_cache,
 };
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 80ab20d4fa3..4e456bd955b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -13,6 +13,7 @@
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
@@ -334,11 +335,24 @@ static void __init early_cpu_detect(void)
 
 	get_cpu_vendor(c, 1);
 
+	early_get_cap(c);
+
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
+}
 
-	early_get_cap(c);
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6; unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  In the latter case it doesn't even *fail*
+ * reliably, so probing for it doesn't even work.  Disable it completely
+ * unless we can find a reliable way to detect all the broken cases.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
 }
 
 static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
@@ -395,8 +409,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 		}
 
 		init_scattered_cpuid_features(c);
+		detect_nopl(c);
 	}
-
 }
 
 static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
index dd6e3f15017..a11f5d4477c 100644
--- a/arch/x86/kernel/cpu/common_64.c
+++ b/arch/x86/kernel/cpu/common_64.c
@@ -18,6 +18,7 @@
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
 #include <asm/numa.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
@@ -215,6 +216,39 @@ static void __init early_cpu_support_print(void)
 	}
 }
 
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  Hence, probe for it based on first
+ * principles.
+ *
+ * Note: no 64-bit chip is known to lack these, but put the code here
+ * for consistency with 32 bits, and to make it utterly trivial to
+ * diagnose the problem should it ever surface.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+	const u32 nopl_signature = 0x888c53b1; /* Random number */
+	u32 has_nopl = nopl_signature;
+
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
+	if (c->x86 >= 6) {
+		asm volatile("\n"
+			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+			     "2:\n"
+			     "        .section .fixup,\"ax\"\n"
+			     "3:      xor %0,%0\n"
+			     "        jmp 2b\n"
+			     "        .previous\n"
+			     _ASM_EXTABLE(1b,3b)
+			     : "+a" (has_nopl));
+
+		if (has_nopl == nopl_signature)
+			set_cpu_cap(c, X86_FEATURE_NOPL);
+	}
+}
+
 static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
 
 void __init early_cpu_init(void)
@@ -313,6 +347,8 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 		c->x86_phys_bits = eax & 0xff;
 	}
 
+	detect_nopl(c);
+
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
@@ -493,17 +529,20 @@ void pda_init(int cpu)
 		/* others are initialized in smpboot.c */
 		pda->pcurrent = &init_task;
 		pda->irqstackptr = boot_cpu_stack;
+		pda->irqstackptr += IRQSTACKSIZE - 64;
 	} else {
-		pda->irqstackptr = (char *)
-			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-		if (!pda->irqstackptr)
-			panic("cannot allocate irqstack for cpu %d", cpu);
+		if (!pda->irqstackptr) {
+			pda->irqstackptr = (char *)
+				__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+			if (!pda->irqstackptr)
+				panic("cannot allocate irqstack for cpu %d",
+				      cpu);
+			pda->irqstackptr += IRQSTACKSIZE - 64;
+		}
 
 		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
 			pda->nodenumber = cpu_to_node(cpu);
 	}
-
-	pda->irqstackptr += IRQSTACKSIZE-64;
 }
 
 char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
@@ -601,19 +640,22 @@ void __cpuinit cpu_init(void)
 	/*
 	 * set up and load the per-CPU TSS
 	 */
-	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+	if (!orig_ist->ist[0]) {
 		static const unsigned int order[N_EXCEPTION_STACKS] = {
-			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+		  [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+		  [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
 		};
-		if (cpu) {
-			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-			if (!estacks)
-				panic("Cannot allocate exception stack %ld %d\n",
-				      v, cpu);
+		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+			if (cpu) {
+				estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+				if (!estacks)
+					panic("Cannot allocate exception "
+					      "stack %ld %d\n", v, cpu);
+			}
+			estacks += PAGE_SIZE << order[v];
+			orig_ist->ist[v] = t->x86_tss.ist[v] =
+					(unsigned long)estacks;
 		}
-		estacks += PAGE_SIZE << order[v];
-		orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
 	}
 
 	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
index cb7a5715596..efae3b22a0f 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -235,9 +235,9 @@ config X86_LONGHAUL
 	  If in doubt, say N.
 
 config X86_E_POWERSAVER
-	tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
+	tristate "VIA C7 Enhanced PowerSaver"
 	select CPU_FREQ_TABLE
-	depends on X86_32 && EXPERIMENTAL
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for VIA C7 processors.
 
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
index 94619c22f56..e4a4bf870e9 100644
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
@@ -44,7 +44,7 @@ struct s_elan_multiplier {
  * It is important that the frequencies
  * are listed in ascending order here!
  */
-struct s_elan_multiplier elan_multiplier[] = {
+static struct s_elan_multiplier elan_multiplier[] = {
 	{1000,	0x02,	0x18},
 	{2000,	0x02,	0x10},
 	{4000,	0x02,	0x08},
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index c45ca6d4dce..84bb395038d 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -66,7 +66,6 @@ static u32 find_freq_from_fid(u32 fid)
 	return 800 + (fid * 100);
 }
 
-
 /* Return a frequency in KHz, given an input fid */
 static u32 find_khz_freq_from_fid(u32 fid)
 {
@@ -78,7 +77,6 @@ static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 p
 	return data[pstate].frequency;
 }
 
-
 /* Return the vco fid for an input fid
  *
  * Each "low" fid has corresponding "high" fid, and you can get to "low" fids
@@ -166,7 +164,6 @@ static void fidvid_msr_init(void)
 	wrmsr(MSR_FIDVID_CTL, lo, hi);
 }
 
-
 /* write the new fid value along with the other control fields to the msr */
 static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 {
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 3fd7a67bb06..898a5a2002e 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -15,13 +15,11 @@
 /*
  * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
  */
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 {
 	unsigned char ccr2, ccr3;
-	unsigned long flags;
 
 	/* we test for DEVID by checking whether CCR3 is writable */
-	local_irq_save(flags);
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, ccr3 ^ 0x80);
 	getCx86(0xc0);   /* dummy to change bus */
@@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 		*dir0 = getCx86(CX86_DIR0);
 		*dir1 = getCx86(CX86_DIR1);
 	}
-	local_irq_restore(flags);
 }
 
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__do_cyrix_devid(dir0, dir1);
+	local_irq_restore(flags);
+}
 /*
  * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
  * order to identify the Cyrix CPU model after we're out of setup.c
@@ -134,23 +139,6 @@ static void __cpuinit set_cx86_memwb(void)
 	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
 }
 
-static void __cpuinit set_cx86_inc(void)
-{
-	unsigned char ccr3;
-
-	printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
-
-	ccr3 = getCx86(CX86_CCR3);
-	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
-	/* PCR1 -- Performance Control */
-	/* Incrementor on, whatever that is */
-	setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
-	/* PCR0 -- Performance Control */
-	/* Incrementor Margin 10 */
-	setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
-	setCx86(CX86_CCR3, ccr3);	/* disable MAPEN */
-}
-
 /*
  *	Configure later MediaGX and/or Geode processor.
  */
@@ -174,11 +162,28 @@ static void __cpuinit geode_configure(void)
 
 	set_cx86_memwb();
 	set_cx86_reorder();
-	set_cx86_inc();
 
 	local_irq_restore(flags);
 }
 
+static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+{
+	unsigned char dir0, dir0_msn, dir1 = 0;
+
+	__do_cyrix_devid(&dir0, &dir1);
+	dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
+
+	switch (dir0_msn) {
+	case 3: /* 6x86/6x86L */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	case 5: /* 6x86MX/M II */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	}
+}
 
 static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 {
@@ -434,6 +439,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Cyrix",
 	.c_ident	= { "CyrixInstead" },
+	.c_early_init	= early_init_cyrix,
 	.c_init		= init_cyrix,
 	.c_identify	= cyrix_identify,
 };
diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c
index e43ad4ad4cb..c9017799497 100644
--- a/arch/x86/kernel/cpu/feature_names.c
+++ b/arch/x86/kernel/cpu/feature_names.c
@@ -39,7 +39,8 @@ const char * const x86_cap_flags[NCAPINTS*32] = {
 	NULL, NULL, NULL, NULL,
 	"constant_tsc", "up", NULL, "arch_perfmon",
 	"pebs", "bts", NULL, NULL,
-	"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	"rep_good", NULL, NULL, NULL,
+	"nopl", NULL, NULL, NULL,
 	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 	/* Intel-defined (#2) */
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 65a339678ec..726a5fcdf34 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -759,6 +759,7 @@ static struct sysdev_class mce_sysclass = {
 };
 
 DEFINE_PER_CPU(struct sys_device, device_mce);
+void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu) __cpuinitdata;
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
@@ -883,9 +884,13 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 		mce_create_device(cpu);
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
 		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
 		mce_remove_device(cpu);
 		break;
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 88736cadbaa..5eb390a4b2e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -628,6 +628,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 	deallocate_threshold_block(cpu, bank);
 
 free_out:
+	kobject_del(b->kobj);
 	kobject_put(b->kobj);
 	kfree(b);
 	per_cpu(threshold_banks, cpu)[bank] = NULL;
@@ -645,14 +646,11 @@ static void threshold_remove_device(unsigned int cpu)
 }
 
 /* get notified when a cpu comes on/off */
-static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb,
-					    unsigned long action, void *hcpu)
+static void __cpuinit amd_64_threshold_cpu_callback(unsigned long action,
+						     unsigned int cpu)
 {
-	/* cpu was unsigned int to begin with */
-	unsigned int cpu = (unsigned long)hcpu;
-
 	if (cpu >= NR_CPUS)
-		goto out;
+		return;
 
 	switch (action) {
 	case CPU_ONLINE:
@@ -666,14 +664,8 @@ static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb,
 	default:
 		break;
 	}
-      out:
-	return NOTIFY_OK;
 }
 
-static struct notifier_block threshold_cpu_notifier __cpuinitdata = {
-	.notifier_call = threshold_cpu_callback,
-};
-
 static __init int threshold_init_device(void)
 {
 	unsigned lcpu = 0;
@@ -684,7 +676,7 @@ static __init int threshold_init_device(void)
 		if (err)
 			return err;
 	}
-	register_hotcpu_notifier(&threshold_cpu_notifier);
+	threshold_cpu_callback = amd_64_threshold_cpu_callback;
 	return 0;
 }
 
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 509bd3d9eac..cb7d3b6a80e 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -379,6 +379,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 			     unsigned long *size, mtrr_type *type)
 {
 	unsigned int mask_lo, mask_hi, base_lo, base_hi;
+	unsigned int tmp, hi;
 
 	rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
 	if ((mask_lo & 0x800) == 0) {
@@ -392,8 +393,23 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 	rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi);
 
 	/* Work out the shifted address mask. */
-	mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT)
-	    | mask_lo >> PAGE_SHIFT;
+	tmp = mask_hi << (32 - PAGE_SHIFT) | mask_lo >> PAGE_SHIFT;
+	mask_lo = size_or_mask | tmp;
+	/* Expand tmp with high bits to all 1s*/
+	hi = fls(tmp);
+	if (hi > 0) {
+		tmp |= ~((1<<(hi - 1)) - 1);
+
+		if (tmp != mask_lo) {
+			static int once = 1;
+
+			if (once) {
+				printk(KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
+				once = 0;
+			}
+			mask_lo = tmp;
+		}
+	}
 
 	/* This works correctly if size is a power of two, i.e. a
 	   contiguous range. */
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 6f23969c8fa..b117d7f8a56 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -1496,11 +1496,8 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
 	/* kvm/qemu doesn't have mtrr set right, don't trim them all */
 	if (!highest_pfn) {
-		if (!kvm_para_available()) {
-			printk(KERN_WARNING
+		WARN(!kvm_para_available(), KERN_WARNING
 				"WARNING: strange, CPU MTRRs all blank?\n");
-			WARN_ON(1);
-		}
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index de7439f82b9..05cc22dbd4f 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -478,7 +478,13 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 		perfctr_msr = MSR_P4_IQ_PERFCTR1;
 		evntsel_msr = MSR_P4_CRU_ESCR0;
 		cccr_msr = MSR_P4_IQ_CCCR1;
-		cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
+
+		/* Pentium 4 D processors don't support P4_CCCR_OVF_PMI1 */
+		if (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask == 4)
+			cccr_val = P4_CCCR_OVF_PMI0;
+		else
+			cccr_val = P4_CCCR_OVF_PMI1;
+		cccr_val |= P4_CCCR_ESCR_SELECT(4);
 	}
 
 	evntsel = P4_ESCR_EVENT_SELECT(0x3F)
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 14b11b3be31..8e9cd6a8ec1 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -89,6 +89,8 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	struct cpuid_regs cmd;
 	int cpu = iminor(file->f_path.dentry->d_inode);
 	u64 pos = *ppos;
+	ssize_t bytes = 0;
+	int err = 0;
 
 	if (count % 16)
 		return -EINVAL;	/* Invalid chunk size */
@@ -96,14 +98,19 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	for (; count; count -= 16) {
 		cmd.eax = pos;
 		cmd.ecx = pos >> 32;
-		smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
-		if (copy_to_user(tmp, &cmd, 16))
-			return -EFAULT;
+		err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
+		if (err)
+			break;
+		if (copy_to_user(tmp, &cmd, 16)) {
+			err = -EFAULT;
+			break;
+		}
 		tmp += 16;
+		bytes += 16;
 		*ppos = ++pos;
 	}
 
-	return tmp - buf;
+	return bytes ? bytes : err;
 }
 
 static int cpuid_open(struct inode *inode, struct file *file)
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 9af89078f7b..66e48aa2dd1 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1203,7 +1203,7 @@ static int __init parse_memmap_opt(char *p)
 	if (!p)
 		return -EINVAL;
 
-	if (!strcmp(p, "exactmap")) {
+	if (!strncmp(p, "exactmap", 8)) {
 #ifdef CONFIG_CRASH_DUMP
 		/*
 		 * If we are doing a crash dump, we still need to know
diff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c
index 4b63c8e1f13..5cab48ee61a 100644
--- a/arch/x86/kernel/efi_32.c
+++ b/arch/x86/kernel/efi_32.c
@@ -53,7 +53,7 @@ void efi_call_phys_prelog(void)
 	 * directory. If I have PAE, I just need to duplicate one entry in
 	 * page directory.
 	 */
-	cr4 = read_cr4();
+	cr4 = read_cr4_safe();
 
 	if (cr4 & X86_CR4_PAE) {
 		efi_bak_pg_dir_pointer[0].pgd =
@@ -91,7 +91,7 @@ void efi_call_phys_epilog(void)
 	gdt_descr.size = GDT_SIZE - 1;
 	load_gdt(&gdt_descr);
 
-	cr4 = read_cr4();
+	cr4 = read_cr4_safe();
 
 	if (cr4 & X86_CR4_PAE) {
 		swapper_pg_dir[pgd_index(0)].pgd =
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 1fa8be5bd21..eaff0bbb144 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -99,3 +99,4 @@ int is_uv_system(void)
 {
 	return uv_system_type != UV_NONE;
 }
+EXPORT_SYMBOL_GPL(is_uv_system);
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 2cfcbded888..bfa837cb16b 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -222,7 +222,7 @@ static __init void map_low_mmrs(void)
 
 enum map_type {map_wb, map_uc};
 
-static void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
 {
 	unsigned long bytes, paddr;
 
@@ -293,7 +293,9 @@ static __init void uv_rtc_init(void)
 		sn_rtc_cycles_per_second = ticks_per_sec;
 }
 
-static __init void uv_system_init(void)
+static bool uv_system_inited;
+
+void __init uv_system_init(void)
 {
 	union uvh_si_addr_map_config_u m_n_config;
 	union uvh_node_id_u node_id;
@@ -383,6 +385,7 @@ static __init void uv_system_init(void)
 	map_mmr_high(max_pnode);
 	map_config_high(max_pnode);
 	map_mmioh_high(max_pnode);
+	uv_system_inited = true;
 }
 
 /*
@@ -391,8 +394,7 @@ static __init void uv_system_init(void)
  */
 void __cpuinit uv_cpu_init(void)
 {
-	if (!uv_node_to_blade)
-		uv_system_init();
+	BUG_ON(!uv_system_inited);
 
 	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
 
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 1b318e903bf..9bfc4d72fb2 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -88,6 +88,7 @@ void __init x86_64_start_kernel(char * real_mode_data)
 	BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
 	BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
 				(__START_KERNEL & PGDIR_MASK)));
+	BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) <= MODULES_END);
 
 	/* clear bss before set_intr_gate with early_idt_handler */
 	clear_bss();
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ad2b15a1334..73deaffadd0 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -210,8 +210,8 @@ static void hpet_legacy_clockevent_register(void)
 	/* Calculate the min / max delta */
 	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 							   &hpet_clockevent);
-	hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30,
-							   &hpet_clockevent);
+	/* 5 usec minimum reprogramming delta. */
+	hpet_clockevent.min_delta_ns = 5000;
 
 	/*
 	 * Start hpet with the boot cpu mask and make it
@@ -270,15 +270,22 @@ static void hpet_legacy_set_mode(enum clock_event_mode mode,
 }
 
 static int hpet_legacy_next_event(unsigned long delta,
-			   struct clock_event_device *evt)
+				  struct clock_event_device *evt)
 {
-	unsigned long cnt;
+	u32 cnt;
 
 	cnt = hpet_readl(HPET_COUNTER);
-	cnt += delta;
+	cnt += (u32) delta;
 	hpet_writel(cnt, HPET_T0_CMP);
 
-	return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0;
+	/*
+	 * We need to read back the CMP register to make sure that
+	 * what we wrote hit the chip before we compare it to the
+	 * counter.
+	 */
+	WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt);
+
+	return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 }
 
 /*
@@ -359,6 +366,7 @@ static int hpet_clocksource_register(void)
 int __init hpet_enable(void)
 {
 	unsigned long id;
+	int i;
 
 	if (!is_hpet_capable())
 		return 0;
@@ -369,6 +377,29 @@ int __init hpet_enable(void)
 	 * Read the period and check for a sane value:
 	 */
 	hpet_period = hpet_readl(HPET_PERIOD);
+
+	/*
+	 * AMD SB700 based systems with spread spectrum enabled use a
+	 * SMM based HPET emulation to provide proper frequency
+	 * setting. The SMM code is initialized with the first HPET
+	 * register access and takes some time to complete. During
+	 * this time the config register reads 0xffffffff. We check
+	 * for max. 1000 loops whether the config register reads a non
+	 * 0xffffffff value to make sure that HPET is up and running
+	 * before we go further. A counting loop is safe, as the HPET
+	 * access takes thousands of CPU cycles. On non SB700 based
+	 * machines this check is only done once and has no side
+	 * effects.
+	 */
+	for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) {
+		if (i == 1000) {
+			printk(KERN_WARNING
+			       "HPET config register value = 0xFFFFFFFF. "
+			       "Disabling HPET\n");
+			goto out_nohpet;
+		}
+	}
+
 	if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
 		goto out_nohpet;
 
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index de9aa0e3a9c..09cddb57bec 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -57,7 +57,7 @@ atomic_t irq_mis_count;
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 static DEFINE_SPINLOCK(ioapic_lock);
-static DEFINE_SPINLOCK(vector_lock);
+DEFINE_SPINLOCK(vector_lock);
 
 int timer_through_8259 __initdata;
 
@@ -1209,10 +1209,6 @@ static int assign_irq_vector(int irq)
 	return vector;
 }
 
-void setup_vector_irq(int cpu)
-{
-}
-
 static struct irq_chip ioapic_chip;
 
 #define IOAPIC_AUTO	-1
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index 8269434d170..61a83b70c18 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -101,7 +101,7 @@ int timer_through_8259 __initdata;
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 static DEFINE_SPINLOCK(ioapic_lock);
-DEFINE_SPINLOCK(vector_lock);
+static DEFINE_SPINLOCK(vector_lock);
 
 /*
  * # of IRQ routing registers
@@ -697,6 +697,19 @@ static int pin_2_irq(int idx, int apic, int pin)
 	return irq;
 }
 
+void lock_vector_lock(void)
+{
+	/* Used to the online set of cpus does not change
+	 * during assign_irq_vector.
+	 */
+	spin_lock(&vector_lock);
+}
+
+void unlock_vector_lock(void)
+{
+	spin_unlock(&vector_lock);
+}
+
 static int __assign_irq_vector(int irq, cpumask_t mask)
 {
 	/*
@@ -802,7 +815,7 @@ static void __clear_irq_vector(int irq)
 	cpus_clear(cfg->domain);
 }
 
-static void __setup_vector_irq(int cpu)
+void __setup_vector_irq(int cpu)
 {
 	/* Initialize vector_irq on a new cpu */
 	/* This function must be called with vector_lock held */
@@ -825,14 +838,6 @@ static void __setup_vector_irq(int cpu)
 	}
 }
 
-void setup_vector_irq(int cpu)
-{
-	spin_lock(&vector_lock);
-	__setup_vector_irq(smp_processor_id());
-	spin_unlock(&vector_lock);
-}
-
-
 static struct irq_chip ioapic_chip;
 
 static void ioapic_register_intr(int irq, unsigned long trigger)
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index 1c3a66a67f8..720d2607aac 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -92,6 +92,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "30BF")
 		}
 	},
+	{
+		.callback	= dmi_io_delay_0xed_port,
+		.ident		= "Presario F700",
+		.matches	= {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+			DMI_MATCH(DMI_BOARD_NAME, "30D3")
+		}
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c
index f2d43bc7551..ff7d3b0124f 100644
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -139,6 +139,7 @@ static int __init create_setup_data_nodes(struct dentry *parent)
 		if (PageHighMem(pg)) {
 			data = ioremap_cache(pa_data, sizeof(*data));
 			if (!data) {
+				kfree(node);
 				error = -ENXIO;
 				goto err_dir;
 			}
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 9fe478d9840..0732adba05c 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/numa.h>
 #include <linux/ftrace.h>
+#include <linux/suspend.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -78,7 +79,7 @@ static void load_segments(void)
 /*
  * A architecture hook called to validate the
  * proposed image and prepare the control pages
- * as needed.  The pages for KEXEC_CONTROL_CODE_SIZE
+ * as needed.  The pages for KEXEC_CONTROL_PAGE_SIZE
  * have been allocated, but the segments have yet
  * been copied into the kernel.
  *
@@ -113,6 +114,7 @@ void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
+	int save_ftrace_enabled;
 	asmlinkage unsigned long
 		(*relocate_kernel_ptr)(unsigned long indirection_page,
 				       unsigned long control_page,
@@ -120,7 +122,12 @@ void machine_kexec(struct kimage *image)
 				       unsigned int has_pae,
 				       unsigned int preserve_context);
 
-	tracer_disable();
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context)
+		save_processor_state();
+#endif
+
+	save_ftrace_enabled = __ftrace_enabled_save();
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
@@ -138,7 +145,7 @@ void machine_kexec(struct kimage *image)
 	}
 
 	control_page = page_address(image->control_code_page);
-	memcpy(control_page, relocate_kernel, PAGE_SIZE/2);
+	memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
 
 	relocate_kernel_ptr = control_page;
 	page_list[PA_CONTROL_PAGE] = __pa(control_page);
@@ -178,6 +185,13 @@ void machine_kexec(struct kimage *image)
 					   (unsigned long)page_list,
 					   image->start, cpu_has_pae,
 					   image->preserve_context);
+
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context)
+		restore_processor_state();
+#endif
+
+	__ftrace_enabled_restore(save_ftrace_enabled);
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 07c0f828f48..3b599518c32 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -33,6 +33,8 @@
 #include <linux/module.h>
 #include <asm/geode.h>
 
+#define MFGPT_DEFAULT_IRQ	7
+
 static struct mfgpt_timer_t {
 	unsigned int avail:1;
 } mfgpt_timers[MFGPT_MAX_TIMERS];
@@ -157,29 +159,48 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
 }
 EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
 
-int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
+int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable)
 {
-	u32 val, dummy;
-	int offset;
+	u32 zsel, lpc, dummy;
+	int shift;
 
 	if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
 		return -EIO;
 
-	if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+	/*
+	 * Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA
+	 * is using the same CMP of the timer's Siamese twin, the IRQ is set to
+	 * 2, and we mustn't use nor change it.
+	 * XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the
+	 * IRQ of the 1st. This can only happen if forcing an IRQ, calling this
+	 * with *irq==0 is safe. Currently there _are_ no 2 drivers.
+	 */
+	rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
+	shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4;
+	if (((zsel >> shift) & 0xF) == 2)
 		return -EIO;
 
-	rdmsr(MSR_PIC_ZSEL_LOW, val, dummy);
+	/* Choose IRQ: if none supplied, keep IRQ already set or use default */
+	if (!*irq)
+		*irq = (zsel >> shift) & 0xF;
+	if (!*irq)
+		*irq = MFGPT_DEFAULT_IRQ;
 
-	offset = (timer % 4) * 4;
-
-	val &= ~((0xF << offset) | (0xF << (offset + 16)));
+	/* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */
+	if (*irq < 1 || *irq == 2 || *irq > 15)
+		return -EIO;
+	rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy);
+	if (lpc & (1 << *irq))
+		return -EIO;
 
+	/* All chosen and checked - go for it */
+	if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+		return -EIO;
 	if (enable) {
-		val |= (irq & 0x0F) << (offset);
-		val |= (irq & 0x0F) << (offset + 16);
+		zsel = (zsel & ~(0xF << shift)) | (*irq << shift);
+		wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
 	}
 
-	wrmsr(MSR_PIC_ZSEL_LOW, val, dummy);
 	return 0;
 }
 
@@ -242,7 +263,7 @@ EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
 static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
 static u16 mfgpt_event_clock;
 
-static int irq = 7;
+static int irq;
 static int __init mfgpt_setup(char *str)
 {
 	get_option(&str, &irq);
@@ -346,7 +367,7 @@ int __init mfgpt_timer_setup(void)
 	mfgpt_event_clock = timer;
 
 	/* Set up the IRQ on the MFGPT side */
-	if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
+	if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) {
 		printk(KERN_ERR "mfgpt-timer:  Could not set up IRQ %d\n", irq);
 		return -EIO;
 	}
@@ -374,13 +395,14 @@ int __init mfgpt_timer_setup(void)
 			&mfgpt_clockevent);
 
 	printk(KERN_INFO
-	       "mfgpt-timer:  registering the MFGPT timer as a clock event.\n");
+	       "mfgpt-timer:  Registering MFGPT timer %d as a clock event, using IRQ %d\n",
+	       timer, irq);
 	clockevents_register_device(&mfgpt_clockevent);
 
 	return 0;
 
 err:
-	geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
+	geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq);
 	printk(KERN_ERR
 	       "mfgpt-timer:  Unable to set up the MFGPT clock source\n");
 	return -EIO;
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index fdfdc550b36..efc2f361fe8 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -238,7 +238,7 @@ static struct dmi_system_id __devinitdata mmconf_dmi_table[] = {
 	{}
 };
 
-void __init check_enable_amd_mmconf_dmi(void)
+void __cpuinit check_enable_amd_mmconf_dmi(void)
 {
 	dmi_check_system(mmconf_dmi_table);
 }
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 6ae005ccaed..b3fb430725c 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -49,7 +49,7 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 	return sum & 0xFF;
 }
 
-static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
+static void __init MP_processor_info(struct mpc_config_processor *m)
 {
 	int apicid;
 	char *bootup_cpu = "";
@@ -83,7 +83,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
 	if (x86_quirks->mpc_oem_bus_info)
 		x86_quirks->mpc_oem_bus_info(m, str);
 	else
-		printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
+		apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->mpc_busid, str);
 
 #if MAX_MP_BUSSES < 256
 	if (m->mpc_busid >= MAX_MP_BUSSES) {
@@ -154,7 +154,7 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
 
 static void print_MP_intsrc_info(struct mpc_config_intsrc *m)
 {
-	printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
+	apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
 		m->mpc_irqtype, m->mpc_irqflag & 3,
 		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
@@ -163,7 +163,7 @@ static void print_MP_intsrc_info(struct mpc_config_intsrc *m)
 
 static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq)
 {
-	printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
+	apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
 		mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3,
 		(mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus,
@@ -235,7 +235,7 @@ static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
 
 static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
 {
-	printk(KERN_INFO "Lint: type %d, pol %d, trig %d, bus %02x,"
+	apic_printk(APIC_VERBOSE, "Lint: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
 		m->mpc_irqtype, m->mpc_irqflag & 3,
 		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
@@ -484,7 +484,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 }
 
 
-static void construct_ioapic_table(int mpc_default_type)
+static void __init construct_ioapic_table(int mpc_default_type)
 {
 	struct mpc_config_ioapic ioapic;
 	struct mpc_config_bus bus;
@@ -529,7 +529,7 @@ static void construct_ioapic_table(int mpc_default_type)
 	construct_default_ioirq_mptable(mpc_default_type);
 }
 #else
-static inline void construct_ioapic_table(int mpc_default_type) { }
+static inline void __init construct_ioapic_table(int mpc_default_type) { }
 #endif
 
 static inline void __init construct_default_ISA_mptable(int mpc_default_type)
@@ -695,7 +695,8 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	unsigned int *bp = phys_to_virt(base);
 	struct intel_mp_floating *mpf;
 
-	printk(KERN_DEBUG "Scan SMP from %p for %ld bytes.\n", bp, length);
+	apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n",
+			bp, length);
 	BUILD_BUG_ON(sizeof(*mpf) != 16);
 
 	while (length > 0) {
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 9fd80955244..2e2af5d1819 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -72,21 +72,28 @@ static ssize_t msr_read(struct file *file, char __user *buf,
 	u32 data[2];
 	u32 reg = *ppos;
 	int cpu = iminor(file->f_path.dentry->d_inode);
-	int err;
+	int err = 0;
+	ssize_t bytes = 0;
 
 	if (count % 8)
 		return -EINVAL;	/* Invalid chunk size */
 
 	for (; count; count -= 8) {
 		err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]);
-		if (err)
-			return -EIO;
-		if (copy_to_user(tmp, &data, 8))
-			return -EFAULT;
+		if (err) {
+			if (err == -EFAULT) /* Fix idiotic error code */
+				err = -EIO;
+			break;
+		}
+		if (copy_to_user(tmp, &data, 8)) {
+			err = -EFAULT;
+			break;
+		}
 		tmp += 2;
+		bytes += 8;
 	}
 
-	return ((char __user *)tmp) - buf;
+	return bytes ? bytes : err;
 }
 
 static ssize_t msr_write(struct file *file, const char __user *buf,
@@ -96,21 +103,28 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 	u32 data[2];
 	u32 reg = *ppos;
 	int cpu = iminor(file->f_path.dentry->d_inode);
-	int err;
+	int err = 0;
+	ssize_t bytes = 0;
 
 	if (count % 8)
 		return -EINVAL;	/* Invalid chunk size */
 
 	for (; count; count -= 8) {
-		if (copy_from_user(&data, tmp, 8))
-			return -EFAULT;
+		if (copy_from_user(&data, tmp, 8)) {
+			err = -EFAULT;
+			break;
+		}
 		err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
-		if (err)
-			return -EIO;
+		if (err) {
+			if (err == -EFAULT) /* Fix idiotic error code */
+				err = -EIO;
+			break;
+		}
 		tmp += 2;
+		bytes += 8;
 	}
 
-	return ((char __user *)tmp) - buf;
+	return bytes ? bytes : err;
 }
 
 static int msr_open(struct inode *inode, struct file *file)
@@ -131,7 +145,7 @@ static int msr_open(struct inode *inode, struct file *file)
 		ret = -EIO;	/* MSR not supported */
 out:
 	unlock_kernel();
-	return 0;
+	return ret;
 }
 
 /*
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index ac6d51222e7..abb78a2cc4a 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -114,6 +114,23 @@ static __init void nmi_cpu_busy(void *data)
 }
 #endif
 
+static void report_broken_nmi(int cpu, int *prev_nmi_count)
+{
+	printk(KERN_CONT "\n");
+
+	printk(KERN_WARNING
+		"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+			cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
+
+	printk(KERN_WARNING
+		"Please report this to bugzilla.kernel.org,\n");
+	printk(KERN_WARNING
+		"and attach the output of the 'dmesg' command.\n");
+
+	per_cpu(wd_enabled, cpu) = 0;
+	atomic_dec(&nmi_active);
+}
+
 int __init check_nmi_watchdog(void)
 {
 	unsigned int *prev_nmi_count;
@@ -141,15 +158,8 @@ int __init check_nmi_watchdog(void)
 	for_each_online_cpu(cpu) {
 		if (!per_cpu(wd_enabled, cpu))
 			continue;
-		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
-			printk(KERN_WARNING "WARNING: CPU#%d: NMI "
-				"appears to be stuck (%d->%d)!\n",
-				cpu,
-				prev_nmi_count[cpu],
-				get_nmi_count(cpu));
-			per_cpu(wd_enabled, cpu) = 0;
-			atomic_dec(&nmi_active);
-		}
+		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
+			report_broken_nmi(cpu, prev_nmi_count);
 	}
 	endflag = 1;
 	if (!atomic_read(&nmi_active)) {
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index b8c45610b20..eecc8c18f01 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -73,7 +73,7 @@ static void __init smp_dump_qct(void)
 }
 
 
-void __init numaq_tsc_disable(void)
+void __cpuinit numaq_tsc_disable(void)
 {
 	if (!found_numaq)
 		return;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 94da4d52d79..300da17e61c 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -471,7 +471,7 @@ struct pv_lock_ops pv_lock_ops = {
 	.spin_unlock = __ticket_spin_unlock,
 #endif
 };
-EXPORT_SYMBOL_GPL(pv_lock_ops);
+EXPORT_SYMBOL(pv_lock_ops);
 
 EXPORT_SYMBOL_GPL(pv_time_ops);
 EXPORT_SYMBOL    (pv_cpu_ops);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index b67a4b1d4ea..dcdac6c826e 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -343,9 +343,8 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 	/* were we called with bad_dma_address? */
 	badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE);
 	if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) {
-		printk(KERN_ERR "Calgary: driver tried unmapping bad DMA "
+		WARN(1, KERN_ERR "Calgary: driver tried unmapping bad DMA "
 		       "address 0x%Lx\n", dma_addr);
-		WARN_ON(1);
 		return;
 	}
 
@@ -1269,13 +1268,15 @@ static inline int __init determine_tce_table_size(u64 ram)
 static int __init build_detail_arrays(void)
 {
 	unsigned long ptr;
-	int i, scal_detail_size, rio_detail_size;
+	unsigned numnodes, i;
+	int scal_detail_size, rio_detail_size;
 
-	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+	numnodes = rio_table_hdr->num_scal_dev;
+	if (numnodes > MAX_NUMNODES){
 		printk(KERN_WARNING
 			"Calgary: MAX_NUMNODES too low! Defined as %d, "
 			"but system has %d nodes.\n",
-			MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+			MAX_NUMNODES, numnodes);
 		return -ENODEV;
 	}
 
@@ -1296,8 +1297,7 @@ static int __init build_detail_arrays(void)
 	}
 
 	ptr = ((unsigned long)rio_table_hdr) + 3;
-	for (i = 0; i < rio_table_hdr->num_scal_dev;
-		    i++, ptr += scal_detail_size)
+	for (i = 0; i < numnodes; i++, ptr += scal_detail_size)
 		scal_devs[i] = (struct scal_detail *)ptr;
 
 	for (i = 0; i < rio_table_hdr->num_rio_dev;
@@ -1350,7 +1350,7 @@ static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
  * Function for kdump case. Get the tce tables from first kernel
  * by reading the contents of the base adress register of calgary iommu
  */
-static void get_tce_space_from_tar()
+static void __init get_tce_space_from_tar(void)
 {
 	int bus;
 	void __iomem *target;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 8dbffb846de..87d4d6964ec 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -123,6 +123,14 @@ void __init pci_iommu_alloc(void)
 
 	pci_swiotlb_init();
 }
+
+unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
+{
+	unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
+
+	return size >> PAGE_SHIFT;
+}
+EXPORT_SYMBOL(iommu_num_pages);
 #endif
 
 /*
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 53bc653ed5c..3b7a1ddcc0b 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -95,7 +95,6 @@ static inline void play_dead(void)
 {
 	/* This must be done before dead CPU ack */
 	cpu_exit_clear();
-	wbinvd();
 	mb();
 	/* Ack it */
 	__get_cpu_var(cpu_state) = CPU_DEAD;
@@ -104,8 +103,8 @@ static inline void play_dead(void)
 	 * With physical CPU hotplug, we should halt the cpu
 	 */
 	local_irq_disable();
-	while (1)
-		halt();
+	/* mask all interrupts, flush any and all caches, and halt */
+	wbinvd_halt();
 }
 #else
 static inline void play_dead(void)
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 3fb62a7d9a1..71553b664e2 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -93,14 +93,13 @@ DECLARE_PER_CPU(int, cpu_state);
 static inline void play_dead(void)
 {
 	idle_task_exit();
-	wbinvd();
 	mb();
 	/* Ack it */
 	__get_cpu_var(cpu_state) = CPU_DEAD;
 
 	local_irq_disable();
-	while (1)
-		halt();
+	/* mask all interrupts, flush any and all caches, and halt */
+	wbinvd_halt();
 }
 #else
 static inline void play_dead(void)
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index 703310a9902..6f50664b2ba 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -20,10 +20,11 @@
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define PAE_PGD_ATTR (_PAGE_PRESENT)
 
-/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are
- * used to save some data for jumping back
+/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+ * ~ control_page + PAGE_SIZE are used as data storage and stack for
+ * jumping back
  */
-#define DATA(offset)		(PAGE_SIZE/2+(offset))
+#define DATA(offset)		(KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
 
 /* Minimal CPU state */
 #define ESP			DATA(0x0)
@@ -376,3 +377,6 @@ swap_pages:
 	popl	%ebx
 	popl	%ebp
 	ret
+
+	.globl kexec_control_code_size
+.set kexec_control_code_size, . - relocate_kernel
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b520dae02bf..9838f2539df 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -445,7 +445,7 @@ static void __init reserve_early_setup_data(void)
  * @size: Size of the crashkernel memory to reserve.
  * Returns the base address on success, and -1ULL on failure.
  */
-unsigned long long find_and_reserve_crashkernel(unsigned long long size)
+unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
 {
 	const unsigned long long alignment = 16<<20; 	/* 16M */
 	unsigned long long start = 0LL;
@@ -670,6 +670,18 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+#ifdef CONFIG_X86_64
+	check_efer();
+#endif
+
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
+	/*
+	 * Must be before kernel pagetables are setup
+	 * or fixmap area is touched.
+	 */
+	vmi_init();
+#endif
+
 	/* after early param, so could get panic from serial */
 	reserve_early_setup_data();
 
@@ -730,7 +742,6 @@ void __init setup_arch(char **cmdline_p)
 #else
 	num_physpages = max_pfn;
 
-	check_efer();
 
 	/* How many end-of-memory variables you have, grandma! */
 	/* need this before calling reserve_initrd */
@@ -788,10 +799,6 @@ void __init setup_arch(char **cmdline_p)
 
 	initmem_init(0, max_pfn);
 
-#ifdef CONFIG_X86_64
-	dma32_reserve_bootmem();
-#endif
-
 #ifdef CONFIG_ACPI_SLEEP
 	/*
 	 * Reserve low memory region for sleep support.
@@ -806,20 +813,21 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	reserve_crashkernel();
 
+#ifdef CONFIG_X86_64
+	/*
+	 * dma32_reserve_bootmem() allocates bootmem which may conflict
+	 * with the crashkernel command line, so do that after
+	 * reserve_crashkernel()
+	 */
+	dma32_reserve_bootmem();
+#endif
+
 	reserve_ibft_region();
 
 #ifdef CONFIG_KVM_CLOCK
 	kvmclock_init();
 #endif
 
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
-	/*
-	 * Must be after max_low_pfn is determined, and before kernel
-	 * pagetables are setup.
-	 */
-	vmi_init();
-#endif
-
 	paravirt_pagetable_setup_start(swapper_pg_dir);
 	paging_init();
 	paravirt_pagetable_setup_done(swapper_pg_dir);
@@ -856,12 +864,6 @@ void __init setup_arch(char **cmdline_p)
 	init_apic_mappings();
 	ioapic_init_mappings();
 
-#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
-	if (def_to_bigsmp)
-		printk(KERN_WARNING "More than 8 CPUs detected and "
-			"CONFIG_X86_PC cannot handle it.\nUse "
-			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
-#endif
 	kvm_guest_init();
 
 	e820_reserve_resources();
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index b45ef8ddd65..ca316b5b742 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -104,7 +104,16 @@ static inline int restore_i387(struct _fpstate __user *buf)
 		clts();
 		task_thread_info(current)->status |= TS_USEDFPU;
 	}
-	return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+	err = restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+	if (unlikely(err)) {
+		/*
+		 * Encountered an error while doing the restore from the
+		 * user buffer, clear the fpu state.
+		 */
+		clear_fpu(tsk);
+		clear_used_math();
+	}
+	return err;
 }
 
 /*
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 332512767f4..7985c5b3f91 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -326,12 +326,16 @@ static void __cpuinit start_secondary(void *unused)
 	 * for which cpus receive the IPI. Holding this
 	 * lock helps us to not include this cpu in a currently in progress
 	 * smp_call_function().
+	 *
+	 * We need to hold vector_lock so there the set of online cpus
+	 * does not change while we are assigning vectors to cpus.  Holding
+	 * this lock ensures we don't half assign or remove an irq from a cpu.
 	 */
 	ipi_call_lock_irq();
-#ifdef CONFIG_X86_IO_APIC
-	setup_vector_irq(smp_processor_id());
-#endif
+	lock_vector_lock();
+	__setup_vector_irq(smp_processor_id());
 	cpu_set(smp_processor_id(), cpu_online_map);
+	unlock_vector_lock();
 	ipi_call_unlock_irq();
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 
@@ -752,6 +756,14 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
 }
 
 #ifdef CONFIG_X86_64
+
+/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */
+static void __ref free_bootmem_pda(struct x8664_pda *oldpda)
+{
+	if (!after_bootmem)
+		free_bootmem((unsigned long)oldpda, sizeof(*oldpda));
+}
+
 /*
  * Allocate node local memory for the AP pda.
  *
@@ -780,8 +792,7 @@ int __cpuinit get_local_pda(int cpu)
 
 	if (oldpda) {
 		memcpy(newpda, oldpda, size);
-		if (!after_bootmem)
-			free_bootmem((unsigned long)oldpda, size);
+		free_bootmem_pda(oldpda);
 	}
 
 	newpda->in_bootmem = 0;
@@ -1044,6 +1055,34 @@ static __init void disable_smp(void)
 static int __init smp_sanity_check(unsigned max_cpus)
 {
 	preempt_disable();
+
+#if defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
+	if (def_to_bigsmp && nr_cpu_ids > 8) {
+		unsigned int cpu;
+		unsigned nr;
+
+		printk(KERN_WARNING
+		       "More than 8 CPUs detected - skipping them.\n"
+		       "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n");
+
+		nr = 0;
+		for_each_present_cpu(cpu) {
+			if (nr >= 8)
+				cpu_clear(cpu, cpu_present_map);
+			nr++;
+		}
+
+		nr = 0;
+		for_each_possible_cpu(cpu) {
+			if (nr >= 8)
+				cpu_clear(cpu, cpu_possible_map);
+			nr++;
+		}
+
+		nr_cpu_ids = 8;
+	}
+#endif
+
 	if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
 		printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
 				    "by the BIOS.\n", hard_smp_processor_id());
@@ -1182,6 +1221,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	printk(KERN_INFO "CPU%d: ", 0);
 	print_cpu_info(&cpu_data(0));
 	setup_boot_clock();
+
+	if (is_uv_system())
+		uv_system_init();
 out:
 	preempt_enable();
 }
@@ -1336,7 +1378,9 @@ int __cpu_disable(void)
 	remove_siblinginfo(cpu);
 
 	/* It's now safe to remove this processor from the online map */
+	lock_vector_lock();
 	remove_cpu_from_maps(cpu);
+	unlock_vector_lock();
 	fixup_irqs(cpu_online_map);
 	return 0;
 }
@@ -1370,17 +1414,3 @@ void __cpu_die(unsigned int cpu)
 	BUG();
 }
 #endif
-
-/*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
- */
-static int __init parse_maxcpus(char *arg)
-{
-	extern unsigned int maxcpus;
-
-	if (arg)
-		maxcpus = simple_strtoul(arg, NULL, 0);
-	return 0;
-}
-early_param("maxcpus", parse_maxcpus);
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
index 99941b37eca..397e309839d 100644
--- a/arch/x86/kernel/smpcommon.c
+++ b/arch/x86/kernel/smpcommon.c
@@ -8,18 +8,21 @@
 DEFINE_PER_CPU(unsigned long, this_cpu_off);
 EXPORT_PER_CPU_SYMBOL(this_cpu_off);
 
-/* Initialize the CPU's GDT.  This is either the boot CPU doing itself
-   (still using the master per-cpu area), or a CPU doing it for a
-   secondary which will soon come up. */
+/*
+ * Initialize the CPU's GDT.  This is either the boot CPU doing itself
+ * (still using the master per-cpu area), or a CPU doing it for a
+ * secondary which will soon come up.
+ */
 __cpuinit void init_gdt(int cpu)
 {
-	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+	struct desc_struct gdt;
 
-	pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
-			__per_cpu_offset[cpu], 0xFFFFF,
+	pack_descriptor(&gdt, __per_cpu_offset[cpu], 0xFFFFF,
 			0x2 | DESCTYPE_S, 0x8);
+	gdt.s = 1;
 
-	gdt[GDT_ENTRY_PERCPU].s = 1;
+	write_gdt_entry(get_cpu_gdt_table(cpu),
+			GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
 
 	per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
 	per_cpu(cpu_number, cpu) = cpu;
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index d0fbb7712ab..8b8c0d6640f 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -17,6 +17,7 @@
 #include <asm/genapic.h>
 #include <asm/idle.h>
 #include <asm/tsc.h>
+#include <asm/irq_vectors.h>
 
 #include <mach_apic.h>
 
@@ -783,7 +784,7 @@ static int __init uv_bau_init(void)
 		uv_init_blade(blade, node, cur_cpu);
 		cur_cpu += uv_blade_nr_possible_cpus(blade);
 	}
-	set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
+	alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
 	uv_enable_timeouts();
 
 	return 0;
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index 3f18d73f420..513caaca711 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -1131,7 +1131,14 @@ asmlinkage void math_state_restore(void)
 	}
 
 	clts();				/* Allow maths ops (or we recurse) */
-	restore_fpu_checking(&me->thread.xstate->fxsave);
+	/*
+	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+	 */
+	if (unlikely(restore_fpu_checking(&me->thread.xstate->fxsave))) {
+		stts();
+		force_sig(SIGSEGV, me);
+		return;
+	}
 	task_thread_info(me)->status |= TS_USEDFPU;
 	me->fpu_counter++;
 }
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 7603c055390..8f98e9de1b8 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -104,7 +104,7 @@ __setup("notsc", notsc_setup);
 /*
  * Read TSC and the reference counters. Take care of SMI disturbance
  */
-static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
+static u64 tsc_read_refs(u64 *pm, u64 *hpet)
 {
 	u64 t1, t2;
 	int i;
@@ -122,80 +122,216 @@ static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
 	return ULLONG_MAX;
 }
 
-/**
- * native_calibrate_tsc - calibrate the tsc on boot
+/*
+ * Try to calibrate the TSC against the Programmable
+ * Interrupt Timer and return the frequency of the TSC
+ * in kHz.
+ *
+ * Return ULONG_MAX on failure to calibrate.
  */
-unsigned long native_calibrate_tsc(void)
+static unsigned long pit_calibrate_tsc(void)
 {
-	unsigned long flags;
-	u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
-	int hpet = is_hpet_enabled();
-	unsigned int tsc_khz_val = 0;
-
-	local_irq_save(flags);
-
-	tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+	u64 tsc, t1, t2, delta;
+	unsigned long tscmin, tscmax;
+	int pitcnt;
 
+	/* Set the Gate high, disable speaker */
 	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
 
+	/*
+	 * Setup CTC channel 2* for mode 0, (interrupt on terminal
+	 * count mode), binary count. Set the latch register to 50ms
+	 * (LSB then MSB) to begin countdown.
+	 */
 	outb(0xb0, 0x43);
 	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
 	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
-	tr1 = get_cycles();
-	while ((inb(0x61) & 0x20) == 0);
-	tr2 = get_cycles();
 
-	tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+	tsc = t1 = t2 = get_cycles();
 
-	local_irq_restore(flags);
+	pitcnt = 0;
+	tscmax = 0;
+	tscmin = ULONG_MAX;
+	while ((inb(0x61) & 0x20) == 0) {
+		t2 = get_cycles();
+		delta = t2 - tsc;
+		tsc = t2;
+		if ((unsigned long) delta < tscmin)
+			tscmin = (unsigned int) delta;
+		if ((unsigned long) delta > tscmax)
+			tscmax = (unsigned int) delta;
+		pitcnt++;
+	}
 
 	/*
-	 * Preset the result with the raw and inaccurate PIT
-	 * calibration value
+	 * Sanity checks:
+	 *
+	 * If we were not able to read the PIT more than 5000
+	 * times, then we have been hit by a massive SMI
+	 *
+	 * If the maximum is 10 times larger than the minimum,
+	 * then we got hit by an SMI as well.
 	 */
-	delta = (tr2 - tr1);
+	if (pitcnt < 5000 || tscmax > 10 * tscmin)
+		return ULONG_MAX;
+
+	/* Calculate the PIT value */
+	delta = t2 - t1;
 	do_div(delta, 50);
-	tsc_khz_val = delta;
+	return delta;
+}
+
+
+/**
+ * native_calibrate_tsc - calibrate the tsc on boot
+ */
+unsigned long native_calibrate_tsc(void)
+{
+	u64 tsc1, tsc2, delta, pm1, pm2, hpet1, hpet2;
+	unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
+	unsigned long flags;
+	int hpet = is_hpet_enabled(), i;
+
+	/*
+	 * Run 5 calibration loops to get the lowest frequency value
+	 * (the best estimate). We use two different calibration modes
+	 * here:
+	 *
+	 * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and
+	 * load a timeout of 50ms. We read the time right after we
+	 * started the timer and wait until the PIT count down reaches
+	 * zero. In each wait loop iteration we read the TSC and check
+	 * the delta to the previous read. We keep track of the min
+	 * and max values of that delta. The delta is mostly defined
+	 * by the IO time of the PIT access, so we can detect when a
+	 * SMI/SMM disturbance happend between the two reads. If the
+	 * maximum time is significantly larger than the minimum time,
+	 * then we discard the result and have another try.
+	 *
+	 * 2) Reference counter. If available we use the HPET or the
+	 * PMTIMER as a reference to check the sanity of that value.
+	 * We use separate TSC readouts and check inside of the
+	 * reference read for a SMI/SMM disturbance. We dicard
+	 * disturbed values here as well. We do that around the PIT
+	 * calibration delay loop as we have to wait for a certain
+	 * amount of time anyway.
+	 */
+	for (i = 0; i < 5; i++) {
+		unsigned long tsc_pit_khz;
+
+		/*
+		 * Read the start value and the reference count of
+		 * hpet/pmtimer when available. Then do the PIT
+		 * calibration, which will take at least 50ms, and
+		 * read the end value.
+		 */
+		local_irq_save(flags);
+		tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+		tsc_pit_khz = pit_calibrate_tsc();
+		tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+		local_irq_restore(flags);
+
+		/* Pick the lowest PIT TSC calibration so far */
+		tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
+
+		/* hpet or pmtimer available ? */
+		if (!hpet && !pm1 && !pm2)
+			continue;
+
+		/* Check, whether the sampling was disturbed by an SMI */
+		if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
+			continue;
+
+		tsc2 = (tsc2 - tsc1) * 1000000LL;
+
+		if (hpet) {
+			if (hpet2 < hpet1)
+				hpet2 += 0x100000000ULL;
+			hpet2 -= hpet1;
+			tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+			do_div(tsc1, 1000000);
+		} else {
+			if (pm2 < pm1)
+				pm2 += (u64)ACPI_PM_OVRRUN;
+			pm2 -= pm1;
+			tsc1 = pm2 * 1000000000LL;
+			do_div(tsc1, PMTMR_TICKS_PER_SEC);
+		}
+
+		do_div(tsc2, tsc1);
+		tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
+	}
+
+	/*
+	 * Now check the results.
+	 */
+	if (tsc_pit_min == ULONG_MAX) {
+		/* PIT gave no useful value */
+		printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
+
+		/* We don't have an alternative source, disable TSC */
+		if (!hpet && !pm1 && !pm2) {
+			printk("TSC: No reference (HPET/PMTIMER) available\n");
+			return 0;
+		}
+
+		/* The alternative source failed as well, disable TSC */
+		if (tsc_ref_min == ULONG_MAX) {
+			printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
+			       "failed due to SMI disturbance.\n");
+			return 0;
+		}
+
+		/* Use the alternative source */
+		printk(KERN_INFO "TSC: using %s reference calibration\n",
+		       hpet ? "HPET" : "PMTIMER");
+
+		return tsc_ref_min;
+	}
 
-	/* hpet or pmtimer available ? */
+	/* We don't have an alternative source, use the PIT calibration value */
 	if (!hpet && !pm1 && !pm2) {
-		printk(KERN_INFO "TSC calibrated against PIT\n");
-		goto out;
+		printk(KERN_INFO "TSC: Using PIT calibration value\n");
+		return tsc_pit_min;
 	}
 
-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
-		printk(KERN_WARNING "TSC calibration disturbed by SMI, "
-				"using PIT calibration result\n");
-		goto out;
+	/* The alternative source failed, use the PIT calibration value */
+	if (tsc_ref_min == ULONG_MAX) {
+		printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed due "
+		       "to SMI disturbance. Using PIT calibration\n");
+		return tsc_pit_min;
 	}
 
-	tsc2 = (tsc2 - tsc1) * 1000000LL;
-
-	if (hpet) {
-		printk(KERN_INFO "TSC calibrated against HPET\n");
-		if (hpet2 < hpet1)
-			hpet2 += 0x100000000ULL;
-		hpet2 -= hpet1;
-		tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
-		do_div(tsc1, 1000000);
-	} else {
-		printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
-		if (pm2 < pm1)
-			pm2 += (u64)ACPI_PM_OVRRUN;
-		pm2 -= pm1;
-		tsc1 = pm2 * 1000000000LL;
-		do_div(tsc1, PMTMR_TICKS_PER_SEC);
+	/* Check the reference deviation */
+	delta = ((u64) tsc_pit_min) * 100;
+	do_div(delta, tsc_ref_min);
+
+	/*
+	 * If both calibration results are inside a 5% window, the we
+	 * use the lower frequency of those as it is probably the
+	 * closest estimate.
+	 */
+	if (delta >= 95 && delta <= 105) {
+		printk(KERN_INFO "TSC: PIT calibration confirmed by %s.\n",
+		       hpet ? "HPET" : "PMTIMER");
+		printk(KERN_INFO "TSC: using %s calibration value\n",
+		       tsc_pit_min <= tsc_ref_min ? "PIT" :
+		       hpet ? "HPET" : "PMTIMER");
+		return tsc_pit_min <= tsc_ref_min ? tsc_pit_min : tsc_ref_min;
 	}
 
-	do_div(tsc2, tsc1);
-	tsc_khz_val = tsc2;
+	printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
+	       hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
 
-out:
-	return tsc_khz_val;
+	/*
+	 * The calibration values differ too much. In doubt, we use
+	 * the PIT value as we know that there are PMTIMERs around
+	 * running at double speed.
+	 */
+	printk(KERN_INFO "TSC: Using PIT calibration value\n");
+	return tsc_pit_min;
 }
 
-
 #ifdef CONFIG_X86_32
 /* Only called from the Powernow K7 cpu freq driver */
 int recalibrate_cpu_khz(void)
@@ -314,7 +450,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 			mark_tsc_unstable("cpufreq changes");
 	}
 
-	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
+	set_cyc2ns_scale(tsc_khz, freq->cpu);
 
 	return 0;
 }
@@ -325,6 +461,10 @@ static struct notifier_block time_cpufreq_notifier_block = {
 
 static int __init cpufreq_tsc(void)
 {
+	if (!cpu_has_tsc)
+		return 0;
+	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+		return 0;
 	cpufreq_register_notifier(&time_cpufreq_notifier_block,
 				CPUFREQ_TRANSITION_NOTIFIER);
 	return 0;
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 0577825cf89..9ffb01c31c4 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -88,11 +88,9 @@ static __cpuinit void check_tsc_warp(void)
 			__raw_spin_unlock(&sync_lock);
 		}
 	}
-	if (!(now-start)) {
-		printk("Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
+	WARN(!(now-start),
+		"Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
 			now-start, end-start);
-		WARN_ON(1);
-	}
 }
 
 /*
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 41e01b145c4..594ef47f0a6 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -184,8 +184,6 @@ static int __init visws_get_smp_config(unsigned int early)
 	return 1;
 }
 
-extern unsigned int __cpuinitdata maxcpus;
-
 /*
  * The Visual Workstation is Intel MP compliant in the hardware
  * sense, but it doesn't have a BIOS(-configuration table).
@@ -244,8 +242,8 @@ static int __init visws_find_smp_config(unsigned int reserve)
 		ncpus = CO_CPU_MAX;
 	}
 
-	if (ncpus > maxcpus)
-		ncpus = maxcpus;
+	if (ncpus > setup_max_cpus)
+		ncpus = setup_max_cpus;
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	smp_found_config = 1;
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 0a1b1a9d922..6ca515d6db5 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -37,6 +37,7 @@
 #include <asm/timer.h>
 #include <asm/vmi_time.h>
 #include <asm/kmap_types.h>
+#include <asm/setup.h>
 
 /* Convenient for calling VMI functions indirectly in the ROM */
 typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void);
@@ -683,7 +684,7 @@ void vmi_bringup(void)
 {
  	/* We must establish the lowmem mapping for MMU ops to work */
 	if (vmi_ops.set_linear_mapping)
-		vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, max_low_pfn, 0);
+		vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, MAXMEM_PFN, 0);
 }
 
 /*
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index cdb2363697d..af5bdad8460 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -209,3 +209,11 @@ SECTIONS
 
   DWARF_DEBUG
 }
+
+#ifdef CONFIG_KEXEC
+/* Link time checks */
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+       "kexec control code size is too big")
+#endif
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 2fa231923cf..3da2508eb22 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -653,6 +653,88 @@ static void rmap_write_protect(struct kvm *kvm, u64 gfn)
 	account_shadowed(kvm, gfn);
 }
 
+static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
+{
+	u64 *spte;
+	int need_tlb_flush = 0;
+
+	while ((spte = rmap_next(kvm, rmapp, NULL))) {
+		BUG_ON(!(*spte & PT_PRESENT_MASK));
+		rmap_printk("kvm_rmap_unmap_hva: spte %p %llx\n", spte, *spte);
+		rmap_remove(kvm, spte);
+		set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+		need_tlb_flush = 1;
+	}
+	return need_tlb_flush;
+}
+
+static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
+			  int (*handler)(struct kvm *kvm, unsigned long *rmapp))
+{
+	int i;
+	int retval = 0;
+
+	/*
+	 * If mmap_sem isn't taken, we can look the memslots with only
+	 * the mmu_lock by skipping over the slots with userspace_addr == 0.
+	 */
+	for (i = 0; i < kvm->nmemslots; i++) {
+		struct kvm_memory_slot *memslot = &kvm->memslots[i];
+		unsigned long start = memslot->userspace_addr;
+		unsigned long end;
+
+		/* mmu_lock protects userspace_addr */
+		if (!start)
+			continue;
+
+		end = start + (memslot->npages << PAGE_SHIFT);
+		if (hva >= start && hva < end) {
+			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
+			retval |= handler(kvm, &memslot->rmap[gfn_offset]);
+			retval |= handler(kvm,
+					  &memslot->lpage_info[
+						  gfn_offset /
+						  KVM_PAGES_PER_HPAGE].rmap_pde);
+		}
+	}
+
+	return retval;
+}
+
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
+{
+	return kvm_handle_hva(kvm, hva, kvm_unmap_rmapp);
+}
+
+static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
+{
+	u64 *spte;
+	int young = 0;
+
+	/* always return old for EPT */
+	if (!shadow_accessed_mask)
+		return 0;
+
+	spte = rmap_next(kvm, rmapp, NULL);
+	while (spte) {
+		int _young;
+		u64 _spte = *spte;
+		BUG_ON(!(_spte & PT_PRESENT_MASK));
+		_young = _spte & PT_ACCESSED_MASK;
+		if (_young) {
+			young = 1;
+			clear_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte);
+		}
+		spte = rmap_next(kvm, rmapp, spte);
+	}
+	return young;
+}
+
+int kvm_age_hva(struct kvm *kvm, unsigned long hva)
+{
+	return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
+}
+
 #ifdef MMU_DEBUG
 static int is_empty_shadow_page(u64 *spt)
 {
@@ -1203,6 +1285,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	int r;
 	int largepage = 0;
 	pfn_t pfn;
+	unsigned long mmu_seq;
 
 	down_read(&current->mm->mmap_sem);
 	if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
@@ -1210,6 +1293,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 		largepage = 1;
 	}
 
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -1220,6 +1305,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	}
 
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, v, write, largepage, gfn, pfn,
 			 PT32E_ROOT_LEVEL);
@@ -1227,6 +1314,11 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 
 
 	return r;
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
 
@@ -1345,6 +1437,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	int r;
 	int largepage = 0;
 	gfn_t gfn = gpa >> PAGE_SHIFT;
+	unsigned long mmu_seq;
 
 	ASSERT(vcpu);
 	ASSERT(VALID_PAGE(vcpu->arch.mmu.root_hpa));
@@ -1358,6 +1451,8 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		largepage = 1;
 	}
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 	if (is_error_pfn(pfn)) {
@@ -1365,12 +1460,19 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		return 1;
 	}
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK,
 			 largepage, gfn, pfn, kvm_x86_ops->get_tdp_level());
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return r;
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
 static void nonpaging_free(struct kvm_vcpu *vcpu)
@@ -1670,6 +1772,8 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		vcpu->arch.update_pte.largepage = 1;
 	}
+	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 4d918220bae..4a814bff21f 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -263,6 +263,8 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	pfn = vcpu->arch.update_pte.pfn;
 	if (is_error_pfn(pfn))
 		return;
+	if (mmu_notifier_retry(vcpu, vcpu->arch.update_pte.mmu_seq))
+		return;
 	kvm_get_pfn(pfn);
 	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
 		     gpte & PT_DIRTY_MASK, NULL, largepage, gpte_to_gfn(gpte),
@@ -343,7 +345,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		shadow_addr = __pa(shadow_page->spt);
 		shadow_pte = shadow_addr | PT_PRESENT_MASK | PT_ACCESSED_MASK
 			| PT_WRITABLE_MASK | PT_USER_MASK;
-		*shadow_ent = shadow_pte;
+		set_shadow_pte(shadow_ent, shadow_pte);
 	}
 
 	mmu_set_spte(vcpu, shadow_ent, access, walker->pte_access & access,
@@ -380,6 +382,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	int r;
 	pfn_t pfn;
 	int largepage = 0;
+	unsigned long mmu_seq;
 
 	pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code);
 	kvm_mmu_audit(vcpu, "pre page fault");
@@ -413,6 +416,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 			largepage = 1;
 		}
 	}
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, walker.gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -424,6 +429,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	}
 
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	shadow_pte = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
 				  largepage, &write_pt, pfn);
@@ -439,6 +446,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return write_pt;
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
 static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index e2ee264740c..8233b86c778 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -62,6 +62,7 @@ static int npt = 1;
 module_param(npt, int, S_IRUGO);
 
 static void kvm_reput_irq(struct vcpu_svm *svm);
+static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 
 static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
 {
@@ -878,6 +879,10 @@ set:
 static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE;
+	unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4;
+
+	if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE))
+		force_new_asid(vcpu);
 
 	vcpu->arch.cr4 = cr4;
 	if (!npt_enabled)
@@ -1027,6 +1032,13 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 		KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
 			    (u32)fault_address, (u32)(fault_address >> 32),
 			    handler);
+	/*
+	 * FIXME: Tis shouldn't be necessary here, but there is a flush
+	 * missing in the MMU code. Until we find this bug, flush the
+	 * complete TLB here on an NPF
+	 */
+	if (npt_enabled)
+		svm_flush_tlb(&svm->vcpu);
 
 	if (event_injection)
 		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 2a69773e3b2..7041cc52b56 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3301,8 +3301,7 @@ static int __init vmx_init(void)
 		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
 			VMX_EPT_WRITABLE_MASK |
 			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
-		kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
-				VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+		kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
 				VMX_EPT_EXECUTABLE_MASK);
 		kvm_enable_tdp();
 	} else
diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h
index 425a13436b3..23e8373507a 100644
--- a/arch/x86/kvm/vmx.h
+++ b/arch/x86/kvm/vmx.h
@@ -370,8 +370,6 @@ enum vmcs_field {
 #define VMX_EPT_READABLE_MASK			0x1ull
 #define VMX_EPT_WRITABLE_MASK			0x2ull
 #define VMX_EPT_EXECUTABLE_MASK			0x4ull
-#define VMX_EPT_FAKE_ACCESSED_MASK		(1ull << 62)
-#define VMX_EPT_FAKE_DIRTY_MASK			(1ull << 63)
 
 #define VMX_EPT_IDENTITY_PAGETABLE_ADDR		0xfffbc000ul
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 5916191420c..0d682fc6aeb 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -883,6 +883,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PIT:
 	case KVM_CAP_NOP_IO_DELAY:
 	case KVM_CAP_MP_STATE:
+	case KVM_CAP_SYNC_MMU:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1495,6 +1496,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 		goto out;
 
 	down_write(&kvm->slots_lock);
+	spin_lock(&kvm->mmu_lock);
 
 	p = &kvm->arch.aliases[alias->slot];
 	p->base_gfn = alias->guest_phys_addr >> PAGE_SHIFT;
@@ -1506,6 +1508,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 			break;
 	kvm->arch.naliases = n;
 
+	spin_unlock(&kvm->mmu_lock);
 	kvm_mmu_zap_all(kvm);
 
 	up_write(&kvm->slots_lock);
@@ -3972,16 +3975,23 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	 */
 	if (!user_alloc) {
 		if (npages && !old.rmap) {
+			unsigned long userspace_addr;
+
 			down_write(&current->mm->mmap_sem);
-			memslot->userspace_addr = do_mmap(NULL, 0,
-						     npages * PAGE_SIZE,
-						     PROT_READ | PROT_WRITE,
-						     MAP_SHARED | MAP_ANONYMOUS,
-						     0);
+			userspace_addr = do_mmap(NULL, 0,
+						 npages * PAGE_SIZE,
+						 PROT_READ | PROT_WRITE,
+						 MAP_SHARED | MAP_ANONYMOUS,
+						 0);
 			up_write(&current->mm->mmap_sem);
 
-			if (IS_ERR((void *)memslot->userspace_addr))
-				return PTR_ERR((void *)memslot->userspace_addr);
+			if (IS_ERR((void *)userspace_addr))
+				return PTR_ERR((void *)userspace_addr);
+
+			/* set userspace_addr atomically for kvm_hva_to_rmapp */
+			spin_lock(&kvm->mmu_lock);
+			memslot->userspace_addr = userspace_addr;
+			spin_unlock(&kvm->mmu_lock);
 		} else {
 			if (!old.user_alloc && old.rmap) {
 				int ret;
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index dfdf428975c..f118c110af3 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -52,7 +52,7 @@
 	jnz 100b
 102:
 	.section .fixup,"ax"
-103:	addl %r8d,%edx			/* ecx is zerorest also */
+103:	addl %ecx,%edx			/* ecx is zerorest also */
 	jmp copy_user_handle_tail
 	.previous
 
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 40e0e309d27..cb0c112386f 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -32,7 +32,7 @@
 	jnz 100b
 102:
 	.section .fixup,"ax"
-103:	addl %r8d,%edx			/* ecx is zerorest also */
+103:	addl %ecx,%edx			/* ecx is zerorest also */
 	jmp copy_user_handle_tail
 	.previous
 
@@ -108,7 +108,6 @@ ENTRY(__copy_user_nocache)
 	jmp 60f
 50:	movl %ecx,%edx
 60:	sfence
-	movl %r8d,%ecx
 	jmp copy_user_handle_tail
 	.previous
 
diff --git a/arch/x86/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c
index d5a2b39f882..01b868ba82f 100644
--- a/arch/x86/lib/msr-on-cpu.c
+++ b/arch/x86/lib/msr-on-cpu.c
@@ -30,10 +30,11 @@ static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe)
 
 	rv.msr_no = msr_no;
 	if (safe) {
-		smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
-		err = rv.err;
+		err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu,
+					       &rv, 1);
+		err = err ? err : rv.err;
 	} else {
-		smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
+		err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
 	}
 	*l = rv.l;
 	*h = rv.h;
@@ -64,23 +65,24 @@ static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe)
 	rv.l = l;
 	rv.h = h;
 	if (safe) {
-		smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
-		err = rv.err;
+		err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu,
+					       &rv, 1);
+		err = err ? err : rv.err;
 	} else {
-		smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
+		err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
 	}
 
 	return err;
 }
 
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
-	_wrmsr_on_cpu(cpu, msr_no, l, h, 0);
+	return _wrmsr_on_cpu(cpu, msr_no, l, h, 0);
 }
 
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
-	_rdmsr_on_cpu(cpu, msr_no, l, h, 0);
+	return _rdmsr_on_cpu(cpu, msr_no, l, h, 0);
 }
 
 /* These "safe" variants are slower and should be used when the target MSR
diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c
index a037041817c..4f4e50c3ad3 100644
--- a/arch/x86/mach-rdc321x/platform.c
+++ b/arch/x86/mach-rdc321x/platform.c
@@ -25,7 +25,6 @@
 #include <linux/list.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
-#include <linux/version.h>
 #include <linux/leds.h>
 
 #include <asm/gpio.h>
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 2977ea37791..dfb932dcf13 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,7 +1,6 @@
 obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o
+	    pat.o pgtable.o gup.o
 
-obj-$(CONFIG_HAVE_GET_USER_PAGES_FAST) += gup.o
 obj-$(CONFIG_X86_32)		+= pgtable_32.o
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index d37f29376b0..60ec1d08ff2 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -458,11 +458,7 @@ static void __init pagetable_init(void)
 {
 	pgd_t *pgd_base = swapper_pg_dir;
 
-	paravirt_pagetable_setup_start(pgd_base);
-
 	permanent_kmaps_init(pgd_base);
-
-	paravirt_pagetable_setup_done(pgd_base);
 }
 
 #ifdef CONFIG_ACPI_SLEEP
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 129618ca0ea..d3746efb060 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -60,7 +60,7 @@ static unsigned long dma_reserve __initdata;
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-int direct_gbpages __meminitdata
+int direct_gbpages
 #ifdef CONFIG_DIRECT_GBPAGES
 				= 1
 #endif
@@ -88,7 +88,11 @@ early_param("gbpages", parse_direct_gbpages_on);
 
 int after_bootmem;
 
-static __init void *spp_getpage(void)
+/*
+ * NOTE: This function is marked __ref because it calls __init function
+ * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0.
+ */
+static __ref void *spp_getpage(void)
 {
 	void *ptr;
 
@@ -237,7 +241,7 @@ static unsigned long __initdata table_start;
 static unsigned long __meminitdata table_end;
 static unsigned long __meminitdata table_top;
 
-static __meminit void *alloc_low_page(unsigned long *phys)
+static __ref void *alloc_low_page(unsigned long *phys)
 {
 	unsigned long pfn = table_end++;
 	void *adr;
@@ -258,7 +262,7 @@ static __meminit void *alloc_low_page(unsigned long *phys)
 	return adr;
 }
 
-static __meminit void unmap_low_page(void *adr)
+static __ref void unmap_low_page(void *adr)
 {
 	if (after_bootmem)
 		return;
@@ -314,6 +318,7 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 {
 	unsigned long pages = 0;
 	unsigned long last_map_addr = end;
+	unsigned long start = address;
 
 	int i = pmd_index(address);
 
@@ -331,16 +336,24 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 		}
 
 		if (pmd_val(*pmd)) {
-			if (!pmd_large(*pmd))
+			if (!pmd_large(*pmd)) {
+				spin_lock(&init_mm.page_table_lock);
 				last_map_addr = phys_pte_update(pmd, address,
-								 end);
+								end);
+				spin_unlock(&init_mm.page_table_lock);
+			}
+			/* Count entries we're using from level2_ident_pgt */
+			if (start == 0)
+				pages++;
 			continue;
 		}
 
 		if (page_size_mask & (1<<PG_LEVEL_2M)) {
 			pages++;
+			spin_lock(&init_mm.page_table_lock);
 			set_pte((pte_t *)pmd,
 				pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+			spin_unlock(&init_mm.page_table_lock);
 			last_map_addr = (address & PMD_MASK) + PMD_SIZE;
 			continue;
 		}
@@ -349,7 +362,9 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 		last_map_addr = phys_pte_init(pte, address, end);
 		unmap_low_page(pte);
 
+		spin_lock(&init_mm.page_table_lock);
 		pmd_populate_kernel(&init_mm, pmd, __va(pte_phys));
+		spin_unlock(&init_mm.page_table_lock);
 	}
 	update_page_count(PG_LEVEL_2M, pages);
 	return last_map_addr;
@@ -362,9 +377,7 @@ phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end,
 	pmd_t *pmd = pmd_offset(pud, 0);
 	unsigned long last_map_addr;
 
-	spin_lock(&init_mm.page_table_lock);
 	last_map_addr = phys_pmd_init(pmd, address, end, page_size_mask);
-	spin_unlock(&init_mm.page_table_lock);
 	__flush_tlb_all();
 	return last_map_addr;
 }
@@ -400,20 +413,21 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
 
 		if (page_size_mask & (1<<PG_LEVEL_1G)) {
 			pages++;
+			spin_lock(&init_mm.page_table_lock);
 			set_pte((pte_t *)pud,
 				pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+			spin_unlock(&init_mm.page_table_lock);
 			last_map_addr = (addr & PUD_MASK) + PUD_SIZE;
 			continue;
 		}
 
 		pmd = alloc_low_page(&pmd_phys);
-
-		spin_lock(&init_mm.page_table_lock);
 		last_map_addr = phys_pmd_init(pmd, addr, end, page_size_mask);
 		unmap_low_page(pmd);
+
+		spin_lock(&init_mm.page_table_lock);
 		pud_populate(&init_mm, pud, __va(pmd_phys));
 		spin_unlock(&init_mm.page_table_lock);
-
 	}
 	__flush_tlb_all();
 	update_page_count(PG_LEVEL_1G, pages);
@@ -505,16 +519,14 @@ static unsigned long __init kernel_physical_mapping_init(unsigned long start,
 			continue;
 		}
 
-		if (after_bootmem)
-			pud = pud_offset(pgd, start & PGDIR_MASK);
-		else
-			pud = alloc_low_page(&pud_phys);
-
+		pud = alloc_low_page(&pud_phys);
 		last_map_addr = phys_pud_init(pud, __pa(start), __pa(next),
 						 page_size_mask);
 		unmap_low_page(pud);
-		pgd_populate(&init_mm, pgd_offset_k(start),
-			     __va(pud_phys));
+
+		spin_lock(&init_mm.page_table_lock);
+		pgd_populate(&init_mm, pgd, __va(pud_phys));
+		spin_unlock(&init_mm.page_table_lock);
 	}
 
 	return last_map_addr;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 016f335bbee..d4b6e6a29ae 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -170,7 +170,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	phys_addr &= PAGE_MASK;
 	size = PAGE_ALIGN(last_addr+1) - phys_addr;
 
-	retval = reserve_memtype(phys_addr, phys_addr + size,
+	retval = reserve_memtype(phys_addr, (u64)phys_addr + size,
 						prot_val, &new_prot_val);
 	if (retval) {
 		pr_debug("Warning: reserve_memtype returned %d\n", retval);
@@ -553,13 +553,11 @@ static int __init check_early_ioremap_leak(void)
 {
 	if (!early_ioremap_nested)
 		return 0;
-
-	printk(KERN_WARNING
+	WARN(1, KERN_WARNING
 	       "Debug warning: early ioremap leak of %d areas detected.\n",
-	       early_ioremap_nested);
+		early_ioremap_nested);
 	printk(KERN_WARNING
-	       "please boot with early_ioremap_debug and report the dmesg.\n");
-	WARN_ON(1);
+		"please boot with early_ioremap_debug and report the dmesg.\n");
 
 	return 1;
 }
diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index e7397e108be..635b50e8558 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -430,7 +430,9 @@ static void enter_uniprocessor(void)
 						"may miss events.\n");
 }
 
-static void leave_uniprocessor(void)
+/* __ref because leave_uniprocessor calls cpu_up which is __cpuinit,
+   but this whole function is ifdefed CONFIG_HOTPLUG_CPU */
+static void __ref leave_uniprocessor(void)
 {
 	int cpu;
 	int err;
diff --git a/arch/x86/mm/pageattr-test.c b/arch/x86/mm/pageattr-test.c
index 0dcd42eb94e..d4aa503caaa 100644
--- a/arch/x86/mm/pageattr-test.c
+++ b/arch/x86/mm/pageattr-test.c
@@ -221,8 +221,7 @@ static int pageattr_test(void)
 	failed += print_split(&sc);
 
 	if (failed) {
-		printk(KERN_ERR "NOT PASSED. Please report.\n");
-		WARN_ON(1);
+		WARN(1, KERN_ERR "NOT PASSED. Please report.\n");
 		return -EINVAL;
 	} else {
 		if (print)
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 65c6e46bf05..43e2f8483e4 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -55,13 +55,19 @@ static void split_page_count(int level)
 
 int arch_report_meminfo(char *page)
 {
-	int n = sprintf(page, "DirectMap4k:  %8lu\n"
-			"DirectMap2M:  %8lu\n",
-			direct_pages_count[PG_LEVEL_4K],
-			direct_pages_count[PG_LEVEL_2M]);
+	int n = sprintf(page, "DirectMap4k:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_4K] << 2);
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+	n += sprintf(page + n, "DirectMap2M:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_2M] << 11);
+#else
+	n += sprintf(page + n, "DirectMap4M:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_2M] << 12);
+#endif
 #ifdef CONFIG_X86_64
-	n += sprintf(page + n, "DirectMap1G:  %8lu\n",
-		     direct_pages_count[PG_LEVEL_1G]);
+	if (direct_gbpages)
+		n += sprintf(page + n, "DirectMap1G:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_1G] << 20);
 #endif
 	return n;
 }
@@ -592,10 +598,9 @@ repeat:
 	if (!pte_val(old_pte)) {
 		if (!primary)
 			return 0;
-		printk(KERN_WARNING "CPA: called for zero pte. "
+		WARN(1, KERN_WARNING "CPA: called for zero pte. "
 		       "vaddr = %lx cpa->vaddr = %lx\n", address,
 		       cpa->vaddr);
-		WARN_ON(1);
 		return -EINVAL;
 	}
 
@@ -844,7 +849,7 @@ int set_memory_uc(unsigned long addr, int numpages)
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
-	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
 			    _PAGE_CACHE_UC_MINUS, NULL))
 		return -EINVAL;
 
@@ -863,7 +868,7 @@ int set_memory_wc(unsigned long addr, int numpages)
 	if (!pat_enabled)
 		return set_memory_uc(addr, numpages);
 
-	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
 		_PAGE_CACHE_WC, NULL))
 		return -EINVAL;
 
@@ -879,7 +884,7 @@ int _set_memory_wb(unsigned long addr, int numpages)
 
 int set_memory_wb(unsigned long addr, int numpages)
 {
-	free_memtype(addr, addr + numpages * PAGE_SIZE);
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
 
 	return _set_memory_wb(addr, numpages);
 }
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 2fe30916d4b..2a50e0fa64a 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -207,6 +207,9 @@ static int chk_conflict(struct memtype *new, struct memtype *entry,
 	return -EBUSY;
 }
 
+static struct memtype *cached_entry;
+static u64 cached_start;
+
 /*
  * req_type typically has one of the:
  * - _PAGE_CACHE_WB
@@ -280,11 +283,17 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 	spin_lock(&memtype_lock);
 
+	if (cached_entry && start >= cached_start)
+		entry = cached_entry;
+	else
+		entry = list_entry(&memtype_list, struct memtype, nd);
+
 	/* Search for existing mapping that overlaps the current range */
 	where = NULL;
-	list_for_each_entry(entry, &memtype_list, nd) {
+	list_for_each_entry_continue(entry, &memtype_list, nd) {
 		if (end <= entry->start) {
 			where = entry->nd.prev;
+			cached_entry = list_entry(where, struct memtype, nd);
 			break;
 		} else if (start <= entry->start) { /* end > entry->start */
 			err = chk_conflict(new, entry, new_type);
@@ -292,6 +301,8 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
 				where = entry->nd.prev;
+				cached_entry = list_entry(where,
+							struct memtype, nd);
 			}
 			break;
 		} else if (start < entry->end) { /* start > entry->start */
@@ -299,7 +310,20 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 			if (!err) {
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
-				where = &entry->nd;
+				cached_entry = list_entry(entry->nd.prev,
+							struct memtype, nd);
+
+				/*
+				 * Move to right position in the linked
+				 * list to add this new entry
+				 */
+				list_for_each_entry_continue(entry,
+							&memtype_list, nd) {
+					if (start <= entry->start) {
+						where = entry->nd.prev;
+						break;
+					}
+				}
 			}
 			break;
 		}
@@ -314,6 +338,8 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return err;
 	}
 
+	cached_start = start;
+
 	if (where)
 		list_add(&new->nd, where);
 	else
@@ -343,6 +369,9 @@ int free_memtype(u64 start, u64 end)
 	spin_lock(&memtype_lock);
 	list_for_each_entry(entry, &memtype_list, nd) {
 		if (entry->start == start && entry->end == end) {
+			if (cached_entry == entry || cached_start == start)
+				cached_entry = NULL;
+
 			list_del(&entry->nd);
 			kfree(entry);
 			err = 0;
@@ -361,14 +390,6 @@ int free_memtype(u64 start, u64 end)
 }
 
 
-/*
- * /dev/mem mmap interface. The memtype used for mapping varies:
- * - Use UC for mappings with O_SYNC flag
- * - Without O_SYNC flag, if there is any conflict in reserve_memtype,
- *   inherit the memtype from existing mapping.
- * - Else use UC_MINUS memtype (for backward compatibility with existing
- *   X drivers.
- */
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t vma_prot)
 {
@@ -406,14 +427,14 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
 {
 	u64 offset = ((u64) pfn) << PAGE_SHIFT;
-	unsigned long flags = _PAGE_CACHE_UC_MINUS;
+	unsigned long flags = -1;
 	int retval;
 
 	if (!range_is_allowed(pfn, size))
 		return 0;
 
 	if (file->f_flags & O_SYNC) {
-		flags = _PAGE_CACHE_UC;
+		flags = _PAGE_CACHE_UC_MINUS;
 	}
 
 #ifdef CONFIG_X86_32
@@ -436,13 +457,14 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 #endif
 
 	/*
-	 * With O_SYNC, we can only take UC mapping. Fail if we cannot.
+	 * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
+	 *
 	 * Without O_SYNC, we want to get
 	 * - WB for WB-able memory and no other conflicting mappings
 	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
 	 * - Inherit from confliting mappings otherwise
 	 */
-	if (flags != _PAGE_CACHE_UC_MINUS) {
+	if (flags != -1) {
 		retval = reserve_memtype(offset, offset + size, flags, NULL);
 	} else {
 		retval = reserve_memtype(offset, offset + size, -1, &flags);
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 557b2abceef..d50302774fe 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -207,6 +207,9 @@ static void pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmds[])
 	unsigned long addr;
 	int i;
 
+	if (PREALLOCATED_PMDS == 0) /* Work around gcc-3.4.x bug */
+		return;
+
 	pud = pud_offset(pgd, 0);
 
  	for (addr = i = 0; i < PREALLOCATED_PMDS;
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index 1eb2973a301..16ae70fc57e 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -178,7 +178,7 @@ void acpi_numa_arch_fixup(void)
  * start of the node, and that the current "end" address is after
  * the previous one.
  */
-static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
+static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
 {
 	/*
 	 * Only add present memory as told by the e820.
@@ -189,10 +189,10 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c
 	if (memory_chunk->start_pfn >= max_pfn) {
 		printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
 			memory_chunk->start_pfn, memory_chunk->end_pfn);
-		return;
+		return -1;
 	}
 	if (memory_chunk->nid != nid)
-		return;
+		return -1;
 
 	if (!node_has_online_mem(nid))
 		node_start_pfn[nid] = memory_chunk->start_pfn;
@@ -202,6 +202,8 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c
 
 	if (node_end_pfn[nid] < memory_chunk->end_pfn)
 		node_end_pfn[nid] = memory_chunk->end_pfn;
+
+	return 0;
 }
 
 int __init get_memcfg_from_srat(void)
@@ -259,7 +261,9 @@ int __init get_memcfg_from_srat(void)
 		printk(KERN_DEBUG
 			"chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
 		       j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
-		node_read_chunk(chunk->nid, chunk);
+		if (node_read_chunk(chunk->nid, chunk))
+			continue;
+
 		e820_register_active_regions(chunk->nid, chunk->start_pfn,
 					     min(chunk->end_pfn, max_pfn));
 	}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 3f90289410e..0227694f7da 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
 #include <linux/kdebug.h>
+#include <linux/cpu.h>
 #include <asm/nmi.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
@@ -28,23 +29,48 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 
 static int nmi_start(void);
 static void nmi_stop(void);
+static void nmi_cpu_start(void *dummy);
+static void nmi_cpu_stop(void *dummy);
 
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
+#ifdef CONFIG_SMP
+static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
+				 void *data)
+{
+	int cpu = (unsigned long)data;
+	switch (action) {
+	case CPU_DOWN_FAILED:
+	case CPU_ONLINE:
+		smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
+		break;
+	case CPU_DOWN_PREPARE:
+		smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block oprofile_cpu_nb = {
+	.notifier_call = oprofile_cpu_notifier
+};
+#endif
+
 #ifdef CONFIG_PM
 
 static int nmi_suspend(struct sys_device *dev, pm_message_t state)
 {
+	/* Only one CPU left, just stop that one */
 	if (nmi_enabled == 1)
-		nmi_stop();
+		nmi_cpu_stop(NULL);
 	return 0;
 }
 
 static int nmi_resume(struct sys_device *dev)
 {
 	if (nmi_enabled == 1)
-		nmi_start();
+		nmi_cpu_start(NULL);
 	return 0;
 }
 
@@ -463,6 +489,9 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	}
 
 	init_sysfs();
+#ifdef CONFIG_SMP
+	register_cpu_notifier(&oprofile_cpu_nb);
+#endif
 	using_nmi = 1;
 	ops->create_files = nmi_create_files;
 	ops->setup = nmi_setup;
@@ -476,6 +505,10 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 
 void op_nmi_exit(void)
 {
-	if (using_nmi)
+	if (using_nmi) {
 		exit_sysfs();
+#ifdef CONFIG_SMP
+		unregister_cpu_notifier(&oprofile_cpu_nb);
+#endif
+	}
 }
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index dbf53236971..6a0fca78c36 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -1,6 +1,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/topology.h>
+#include <linux/cpu.h>
 #include "pci.h"
 
 #ifdef CONFIG_X86_64
@@ -555,15 +556,17 @@ static int __init early_fill_mp_bus_info(void)
 	return 0;
 }
 
-postcore_initcall(early_fill_mp_bus_info);
+#else  /* !CONFIG_X86_64 */
 
-#endif
+static int __init early_fill_mp_bus_info(void) { return 0; }
+
+#endif /* !CONFIG_X86_64 */
 
 /* common 32/64 bit code */
 
 #define ENABLE_CF8_EXT_CFG      (1ULL << 46)
 
-static void enable_pci_io_ecs_per_cpu(void *unused)
+static void enable_pci_io_ecs(void *unused)
 {
 	u64 reg;
 	rdmsrl(MSR_AMD64_NB_CFG, reg);
@@ -573,14 +576,51 @@ static void enable_pci_io_ecs_per_cpu(void *unused)
 	}
 }
 
-static int __init enable_pci_io_ecs(void)
+static int __cpuinit amd_cpu_notify(struct notifier_block *self,
+				    unsigned long action, void *hcpu)
 {
+	int cpu = (long)hcpu;
+	switch(action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata amd_cpu_notifier = {
+	.notifier_call	= amd_cpu_notify,
+};
+
+static int __init pci_io_ecs_init(void)
+{
+	int cpu;
+
 	/* assume all cpus from fam10h have IO ECS */
         if (boot_cpu_data.x86 < 0x10)
 		return 0;
-	on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1);
+
+	register_cpu_notifier(&amd_cpu_notifier);
+	for_each_online_cpu(cpu)
+		amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE,
+			       (void *)(long)cpu);
 	pci_probe |= PCI_HAS_IO_ECS;
+
+	return 0;
+}
+
+static int __init amd_postcore_init(void)
+{
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+		return 0;
+
+	early_fill_mp_bus_info();
+	pci_io_ecs_init();
+
 	return 0;
 }
 
-postcore_initcall(enable_pci_io_ecs);
+postcore_initcall(amd_postcore_init);
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 5807d1bc73f..8791fc55e71 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -128,8 +128,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				pr = pci_find_parent_resource(dev, r);
 				if (!r->start || !pr ||
 				    request_resource(pr, r) < 0) {
-					dev_err(&dev->dev, "BAR %d: can't "
-						"allocate resource\n", idx);
+					dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
 					/*
 					 * Something is wrong with the region.
 					 * Invalidate the resource to prevent
@@ -164,15 +163,13 @@ static void __init pcibios_allocate_resources(int pass)
 			else
 				disabled = !(command & PCI_COMMAND_MEMORY);
 			if (pass == disabled) {
-				dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
-					"(f=%lx, d=%d, p=%d)\n",
+				dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n",
 					(unsigned long long) r->start,
 					(unsigned long long) r->end,
 					r->flags, disabled, pass);
 				pr = pci_find_parent_resource(dev, r);
 				if (!pr || request_resource(pr, r) < 0) {
-					dev_err(&dev->dev, "BAR %d: can't "
-						"allocate resource\n", idx);
+					dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
 					/* We'll assign a new address later */
 					r->end -= r->start;
 					r->start = 0;
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index fec0123b33a..8e077185e18 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -590,6 +590,8 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	case PCI_DEVICE_ID_INTEL_ICH10_1:
 	case PCI_DEVICE_ID_INTEL_ICH10_2:
 	case PCI_DEVICE_ID_INTEL_ICH10_3:
+	case PCI_DEVICE_ID_INTEL_PCH_0:
+	case PCI_DEVICE_ID_INTEL_PCH_1:
 		r->name = "PIIX/ICH";
 		r->get = pirq_piix_get;
 		r->set = pirq_piix_set;
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index ec9ce35e44d..b722dd481b3 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -14,7 +14,7 @@ static void __devinit pcibios_fixup_peer_bridges(void)
 	int n, devfn;
 	long node;
 
-	if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+	if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
 		return;
 	DBG("PCI: Peer bridge fixup\n");
 
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 23faaa890ff..d9635764ce3 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -293,7 +293,7 @@ static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
 	return AE_OK;
 }
 
-static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 {
 	struct resource mcfg_res;
 
@@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsigned long start, unsigned long end)
 	return mcfg_res.flags;
 }
 
+typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
+
+static int __init is_mmconf_reserved(check_reserved_t is_reserved,
+		u64 addr, u64 size, int i,
+		typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+{
+	u64 old_size = size;
+	int valid = 0;
+
+	while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+		size >>= 1;
+		if (size < (16UL<<20))
+			break;
+	}
+
+	if (size >= (16UL<<20) || size == old_size) {
+		printk(KERN_NOTICE
+		       "PCI: MCFG area at %Lx reserved in %s\n",
+			addr, with_e820?"E820":"ACPI motherboard resources");
+		valid = 1;
+
+		if (old_size != size) {
+			/* update end_bus_number */
+			cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
+			printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
+			       "segment %hu buses %u - %u\n",
+			       i, (unsigned long)cfg->address, cfg->pci_segment,
+			       (unsigned int)cfg->start_bus_number,
+			       (unsigned int)cfg->end_bus_number);
+		}
+	}
+
+	return valid;
+}
+
 static void __init pci_mmcfg_reject_broken(int early)
 {
 	typeof(pci_mmcfg_config[0]) *cfg;
@@ -324,21 +359,22 @@ static void __init pci_mmcfg_reject_broken(int early)
 
 	for (i = 0; i < pci_mmcfg_config_num; i++) {
 		int valid = 0;
-		u32 size = (cfg->end_bus_number + 1) << 20;
+		u64 addr, size;
+
 		cfg = &pci_mmcfg_config[i];
+		addr = cfg->start_bus_number;
+		addr <<= 20;
+		addr += cfg->address;
+		size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+		size <<= 20;
 		printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
 		       "segment %hu buses %u - %u\n",
 		       i, (unsigned long)cfg->address, cfg->pci_segment,
 		       (unsigned int)cfg->start_bus_number,
 		       (unsigned int)cfg->end_bus_number);
 
-		if (!early &&
-		    is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
-			printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
-			       "in ACPI motherboard resources\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (!early)
+			valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
 
 		if (valid)
 			continue;
@@ -347,16 +383,11 @@ static void __init pci_mmcfg_reject_broken(int early)
 			printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
 			       " reserved in ACPI motherboard resources\n",
 			       cfg->address);
+
 		/* Don't try to do this check unless configuration
 		   type 1 is available. how about type 2 ?*/
-		if (raw_pci_ops && e820_all_mapped(cfg->address,
-						  cfg->address + size - 1,
-						  E820_RESERVED)) {
-			printk(KERN_NOTICE
-			       "PCI: MCFG area at %Lx reserved in E820\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (raw_pci_ops)
+			valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
 
 		if (!valid)
 			goto reject;
@@ -365,7 +396,7 @@ static void __init pci_mmcfg_reject_broken(int early)
 	return;
 
 reject:
-	printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+	printk(KERN_INFO "PCI: Not using MMCONFIG.\n");
 	pci_mmcfg_arch_free();
 	kfree(pci_mmcfg_config);
 	pci_mmcfg_config = NULL;
diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c
index 7dc5d5cf50a..d3e083dea72 100644
--- a/arch/x86/power/cpu_32.c
+++ b/arch/x86/power/cpu_32.c
@@ -45,7 +45,7 @@ static void __save_processor_state(struct saved_context *ctxt)
 	ctxt->cr0 = read_cr0();
 	ctxt->cr2 = read_cr2();
 	ctxt->cr3 = read_cr3();
-	ctxt->cr4 = read_cr4();
+	ctxt->cr4 = read_cr4_safe();
 }
 
 /* Needed by apm.c */
@@ -98,7 +98,9 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	/*
 	 * control registers
 	 */
-	write_cr4(ctxt->cr4);
+	/* cr4 was introduced in the Pentium CPU */
+	if (ctxt->cr4)
+		write_cr4(ctxt->cr4);
 	write_cr3(ctxt->cr3);
 	write_cr2(ctxt->cr2);
 	write_cr0(ctxt->cr0);
diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S
index b95aa6cfe3c..4fc7e872c85 100644
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -28,9 +28,9 @@ ENTRY(swsusp_arch_suspend)
 	ret
 
 ENTRY(restore_image)
-	movl	resume_pg_dir, %ecx
-	subl	$__PAGE_OFFSET, %ecx
-	movl	%ecx, %cr3
+	movl	resume_pg_dir, %eax
+	subl	$__PAGE_OFFSET, %eax
+	movl	%eax, %cr3
 
 	movl	restore_pblist, %edx
 	.p2align 4,,7
@@ -52,17 +52,21 @@ copy_loop:
 
 done:
 	/* go back to the original page tables */
-	movl	$swapper_pg_dir, %ecx
-	subl	$__PAGE_OFFSET, %ecx
-	movl	%ecx, %cr3
+	movl	$swapper_pg_dir, %eax
+	subl	$__PAGE_OFFSET, %eax
+	movl	%eax, %cr3
 	/* Flush TLB, including "global" things (vmalloc) */
-	movl	mmu_cr4_features, %eax
-	movl	%eax, %edx
+	movl	mmu_cr4_features, %ecx
+	jecxz	1f	# cr4 Pentium and higher, skip if zero
+	movl	%ecx, %edx
 	andl	$~(1<<7), %edx;  # PGE
 	movl	%edx, %cr4;  # turn off PGE
-	movl	%cr3, %ecx;  # flush TLB
-	movl	%ecx, %cr3
-	movl	%eax, %cr4;  # turn PGE back on
+1:
+	movl	%cr3, %eax;  # flush TLB
+	movl	%eax, %cr3
+	jecxz	1f	# cr4 Pentium and higher, skip if zero
+	movl	%ecx, %cr4;  # turn PGE back on
+1:
 
 	movl saved_context_esp, %esp
 	movl saved_context_ebp, %ebp
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 9ff6e3cbf08..a4e201b47f6 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1324,7 +1324,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
 
 	.pte_val = xen_pte_val,
-	.pte_flags = native_pte_val,
+	.pte_flags = native_pte_flags,
 	.pgd_val = xen_pgd_val,
 
 	.make_pte = xen_make_pte,
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index b6acc3a0af4..d6790108388 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -42,7 +42,7 @@ char * __init xen_memory_setup(void)
 
 	e820.nr_map = 0;
 
-	e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM);
+	e820_add_region(0, PFN_PHYS((u64)max_pfn), E820_RAM);
 
 	/*
 	 * Even though this is normal, usable memory under Xen, reserve
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index 6e52cdd6166..c9a7c5b74a0 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -18,7 +18,6 @@
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <linux/in6.h>
-#include <linux/ide.h>
 
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
diff --git a/block/blk-core.c b/block/blk-core.c
index fef79ccb2a1..2cba5ef97b2 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -212,6 +212,24 @@ void blk_plug_device(struct request_queue *q)
 }
 EXPORT_SYMBOL(blk_plug_device);
 
+/**
+ * blk_plug_device_unlocked - plug a device without queue lock held
+ * @q:    The &struct request_queue to plug
+ *
+ * Description:
+ *   Like @blk_plug_device(), but grabs the queue lock and disables
+ *   interrupts.
+ **/
+void blk_plug_device_unlocked(struct request_queue *q)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	blk_plug_device(q);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+}
+EXPORT_SYMBOL(blk_plug_device_unlocked);
+
 /*
  * remove the queue from the plugged list, if present. called with
  * queue lock held and interrupts disabled.
@@ -564,6 +582,8 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 
 	q->sg_reserved_size = INT_MAX;
 
+	blk_set_cmd_filter_defaults(&q->cmd_filter);
+
 	/*
 	 * all done
 	 */
diff --git a/block/blk-tag.c b/block/blk-tag.c
index 32667beb03e..ed5166fbc59 100644
--- a/block/blk-tag.c
+++ b/block/blk-tag.c
@@ -38,7 +38,8 @@ static int __blk_free_tags(struct blk_queue_tag *bqt)
 
 	retval = atomic_dec_and_test(&bqt->refcnt);
 	if (retval) {
-		BUG_ON(bqt->busy);
+		BUG_ON(find_first_bit(bqt->tag_map, bqt->max_depth) <
+							bqt->max_depth);
 
 		kfree(bqt->tag_index);
 		bqt->tag_index = NULL;
@@ -147,7 +148,6 @@ static struct blk_queue_tag *__blk_queue_init_tags(struct request_queue *q,
 	if (init_tag_map(q, tags, depth))
 		goto fail;
 
-	tags->busy = 0;
 	atomic_set(&tags->refcnt, 1);
 	return tags;
 fail:
@@ -313,7 +313,6 @@ void blk_queue_end_tag(struct request_queue *q, struct request *rq)
 	 * unlock memory barrier semantics.
 	 */
 	clear_bit_unlock(tag, bqt->tag_map);
-	bqt->busy--;
 }
 EXPORT_SYMBOL(blk_queue_end_tag);
 
@@ -368,7 +367,6 @@ int blk_queue_start_tag(struct request_queue *q, struct request *rq)
 	bqt->tag_index[tag] = rq;
 	blkdev_dequeue_request(rq);
 	list_add(&rq->queuelist, &q->tag_busy_list);
-	bqt->busy++;
 	return 0;
 }
 EXPORT_SYMBOL(blk_queue_start_tag);
diff --git a/block/bsg.c b/block/bsg.c
index 5a68b09a69b..0aae8d7ba99 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -45,8 +45,6 @@ struct bsg_device {
 	char name[BUS_ID_SIZE];
 	int max_queue;
 	unsigned long flags;
-	struct blk_scsi_cmd_filter *cmd_filter;
-	mode_t *f_mode;
 };
 
 enum {
@@ -174,7 +172,8 @@ unlock:
 }
 
 static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
-				struct sg_io_v4 *hdr, struct bsg_device *bd)
+				struct sg_io_v4 *hdr, struct bsg_device *bd,
+				int has_write_perm)
 {
 	if (hdr->request_len > BLK_MAX_CDB) {
 		rq->cmd = kzalloc(hdr->request_len, GFP_KERNEL);
@@ -187,8 +186,7 @@ static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
 		return -EFAULT;
 
 	if (hdr->subprotocol == BSG_SUB_PROTOCOL_SCSI_CMD) {
-		if (blk_cmd_filter_verify_command(bd->cmd_filter, rq->cmd,
-						 bd->f_mode))
+		if (blk_verify_command(&q->cmd_filter, rq->cmd, has_write_perm))
 			return -EPERM;
 	} else if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
@@ -244,7 +242,7 @@ bsg_validate_sgv4_hdr(struct request_queue *q, struct sg_io_v4 *hdr, int *rw)
  * map sg_io_v4 to a request.
  */
 static struct request *
-bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr)
+bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, int has_write_perm)
 {
 	struct request_queue *q = bd->queue;
 	struct request *rq, *next_rq = NULL;
@@ -266,7 +264,7 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr)
 	rq = blk_get_request(q, rw, GFP_KERNEL);
 	if (!rq)
 		return ERR_PTR(-ENOMEM);
-	ret = blk_fill_sgv4_hdr_rq(q, rq, hdr, bd);
+	ret = blk_fill_sgv4_hdr_rq(q, rq, hdr, bd, has_write_perm);
 	if (ret)
 		goto out;
 
@@ -568,25 +566,6 @@ static inline void bsg_set_block(struct bsg_device *bd, struct file *file)
 		set_bit(BSG_F_BLOCK, &bd->flags);
 }
 
-static void bsg_set_cmd_filter(struct bsg_device *bd,
-			   struct file *file)
-{
-	struct inode *inode;
-	struct gendisk *disk;
-
-	if (!file)
-		return;
-
-	inode = file->f_dentry->d_inode;
-	if (!inode)
-		return;
-
-	disk = inode->i_bdev->bd_disk;
-
-	bd->cmd_filter = &disk->cmd_filter;
-	bd->f_mode = &file->f_mode;
-}
-
 /*
  * Check if the error is a "real" error that we should return.
  */
@@ -608,7 +587,6 @@ bsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	dprintk("%s: read %Zd bytes\n", bd->name, count);
 
 	bsg_set_block(bd, file);
-	bsg_set_cmd_filter(bd, file);
 
 	bytes_read = 0;
 	ret = __bsg_read(buf, count, bd, NULL, &bytes_read);
@@ -621,7 +599,7 @@ bsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 }
 
 static int __bsg_write(struct bsg_device *bd, const char __user *buf,
-		       size_t count, ssize_t *bytes_written)
+		       size_t count, ssize_t *bytes_written, int has_write_perm)
 {
 	struct bsg_command *bc;
 	struct request *rq;
@@ -652,7 +630,7 @@ static int __bsg_write(struct bsg_device *bd, const char __user *buf,
 		/*
 		 * get a request, fill in the blanks, and add to request queue
 		 */
-		rq = bsg_map_hdr(bd, &bc->hdr);
+		rq = bsg_map_hdr(bd, &bc->hdr, has_write_perm);
 		if (IS_ERR(rq)) {
 			ret = PTR_ERR(rq);
 			rq = NULL;
@@ -683,10 +661,11 @@ bsg_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	dprintk("%s: write %Zd bytes\n", bd->name, count);
 
 	bsg_set_block(bd, file);
-	bsg_set_cmd_filter(bd, file);
 
 	bytes_written = 0;
-	ret = __bsg_write(bd, buf, count, &bytes_written);
+	ret = __bsg_write(bd, buf, count, &bytes_written,
+			  file->f_mode & FMODE_WRITE);
+
 	*ppos = bytes_written;
 
 	/*
@@ -792,7 +771,6 @@ static struct bsg_device *bsg_add_device(struct inode *inode,
 	bd->queue = rq;
 
 	bsg_set_block(bd, file);
-	bsg_set_cmd_filter(bd, file);
 
 	atomic_set(&bd->ref_count, 1);
 	mutex_lock(&bsg_mutex);
@@ -943,7 +921,7 @@ static long bsg_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		if (copy_from_user(&hdr, uarg, sizeof(hdr)))
 			return -EFAULT;
 
-		rq = bsg_map_hdr(bd, &hdr);
+		rq = bsg_map_hdr(bd, &hdr, file->f_mode & FMODE_WRITE);
 		if (IS_ERR(rq))
 			return PTR_ERR(rq);
 
diff --git a/block/cmd-filter.c b/block/cmd-filter.c
index eec4404fd35..79c14996ac1 100644
--- a/block/cmd-filter.c
+++ b/block/cmd-filter.c
@@ -20,15 +20,14 @@
 #include <linux/list.h>
 #include <linux/genhd.h>
 #include <linux/spinlock.h>
-#include <linux/parser.h>
 #include <linux/capability.h>
 #include <linux/bitops.h>
 
 #include <scsi/scsi.h>
 #include <linux/cdrom.h>
 
-int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
-				  unsigned char *cmd, mode_t *f_mode)
+int blk_verify_command(struct blk_cmd_filter *filter,
+		       unsigned char *cmd, int has_write_perm)
 {
 	/* root can do any command. */
 	if (capable(CAP_SYS_RAWIO))
@@ -43,34 +42,16 @@ int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
 		return 0;
 
 	/* Write-safe commands require a writable open */
-	if (test_bit(cmd[0], filter->write_ok) && (*f_mode & FMODE_WRITE))
+	if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
 		return 0;
 
 	return -EPERM;
 }
-EXPORT_SYMBOL(blk_cmd_filter_verify_command);
-
-int blk_verify_command(struct file *file, unsigned char *cmd)
-{
-	struct gendisk *disk;
-	struct inode *inode;
-
-	if (!file)
-		return -EINVAL;
-
-	inode = file->f_dentry->d_inode;
-	if (!inode)
-		return -EINVAL;
-
-	disk = inode->i_bdev->bd_disk;
-
-	return blk_cmd_filter_verify_command(&disk->cmd_filter,
-						 cmd, &file->f_mode);
-}
 EXPORT_SYMBOL(blk_verify_command);
 
+#if 0
 /* and now, the sysfs stuff */
-static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page,
+static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
 			     int rw)
 {
 	char *npage = page;
@@ -84,8 +65,7 @@ static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page,
 
 	for (i = 0; i < BLK_SCSI_MAX_CMDS; i++) {
 		if (test_bit(i, okbits)) {
-			sprintf(npage, "%02x", i);
-			npage += 2;
+			npage += sprintf(npage, "0x%02x", i);
 			if (i < BLK_SCSI_MAX_CMDS - 1)
 				sprintf(npage++, " ");
 		}
@@ -97,57 +77,65 @@ static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page,
 	return npage - page;
 }
 
-static ssize_t rcf_readcmds_show(struct blk_scsi_cmd_filter *filter, char *page)
+static ssize_t rcf_readcmds_show(struct blk_cmd_filter *filter, char *page)
 {
 	return rcf_cmds_show(filter, page, READ);
 }
 
-static ssize_t rcf_writecmds_show(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter,
 				 char *page)
 {
 	return rcf_cmds_show(filter, page, WRITE);
 }
 
-static ssize_t rcf_cmds_store(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter,
 			      const char *page, size_t count, int rw)
 {
-	ssize_t ret = 0;
 	unsigned long okbits[BLK_SCSI_CMD_PER_LONG], *target_okbits;
-	int cmd, status, len;
-	substring_t ss;
-
-	memset(&okbits, 0, sizeof(okbits));
-
-	for (len = strlen(page); len > 0; len -= 3) {
-		if (len < 2)
-			break;
-		ss.from = (char *) page + ret;
-		ss.to = (char *) page + ret + 2;
-		ret += 3;
-		status = match_hex(&ss, &cmd);
+	int cmd, set;
+	char *p, *status;
+
+	if (rw == READ) {
+		memcpy(&okbits, filter->read_ok, sizeof(okbits));
+		target_okbits = filter->read_ok;
+	} else {
+		memcpy(&okbits, filter->write_ok, sizeof(okbits));
+		target_okbits = filter->write_ok;
+	}
+
+	while ((p = strsep((char **)&page, " ")) != NULL) {
+		set = 1;
+
+		if (p[0] == '+') {
+			p++;
+		} else if (p[0] == '-') {
+			set = 0;
+			p++;
+		}
+
+		cmd = simple_strtol(p, &status, 16);
+
 		/* either of these cases means invalid input, so do nothing. */
-		if (status || cmd >= BLK_SCSI_MAX_CMDS)
+		if ((status == p) || cmd >= BLK_SCSI_MAX_CMDS)
 			return -EINVAL;
 
-		__set_bit(cmd, okbits);
+		if (set)
+			__set_bit(cmd, okbits);
+		else
+			__clear_bit(cmd, okbits);
 	}
 
-	if (rw == READ)
-		target_okbits = filter->read_ok;
-	else
-		target_okbits = filter->write_ok;
-
-	memmove(target_okbits, okbits, sizeof(okbits));
+	memcpy(target_okbits, okbits, sizeof(okbits));
 	return count;
 }
 
-static ssize_t rcf_readcmds_store(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_readcmds_store(struct blk_cmd_filter *filter,
 				  const char *page, size_t count)
 {
 	return rcf_cmds_store(filter, page, count, READ);
 }
 
-static ssize_t rcf_writecmds_store(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_writecmds_store(struct blk_cmd_filter *filter,
 				   const char *page, size_t count)
 {
 	return rcf_cmds_store(filter, page, count, WRITE);
@@ -155,8 +143,8 @@ static ssize_t rcf_writecmds_store(struct blk_scsi_cmd_filter *filter,
 
 struct rcf_sysfs_entry {
 	struct attribute attr;
-	ssize_t (*show)(struct blk_scsi_cmd_filter *, char *);
-	ssize_t (*store)(struct blk_scsi_cmd_filter *, const char *, size_t);
+	ssize_t (*show)(struct blk_cmd_filter *, char *);
+	ssize_t (*store)(struct blk_cmd_filter *, const char *, size_t);
 };
 
 static struct rcf_sysfs_entry rcf_readcmds_entry = {
@@ -183,9 +171,9 @@ static ssize_t
 rcf_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
 {
 	struct rcf_sysfs_entry *entry = to_rcf(attr);
-	struct blk_scsi_cmd_filter *filter;
+	struct blk_cmd_filter *filter;
 
-	filter = container_of(kobj, struct blk_scsi_cmd_filter, kobj);
+	filter = container_of(kobj, struct blk_cmd_filter, kobj);
 	if (entry->show)
 		return entry->show(filter, page);
 
@@ -197,7 +185,7 @@ rcf_attr_store(struct kobject *kobj, struct attribute *attr,
 			const char *page, size_t length)
 {
 	struct rcf_sysfs_entry *entry = to_rcf(attr);
-	struct blk_scsi_cmd_filter *filter;
+	struct blk_cmd_filter *filter;
 
 	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
@@ -205,7 +193,7 @@ rcf_attr_store(struct kobject *kobj, struct attribute *attr,
 	if (!entry->store)
 		return -EINVAL;
 
-	filter = container_of(kobj, struct blk_scsi_cmd_filter, kobj);
+	filter = container_of(kobj, struct blk_cmd_filter, kobj);
 	return entry->store(filter, page, length);
 }
 
@@ -219,116 +207,31 @@ static struct kobj_type rcf_ktype = {
 	.default_attrs = default_attrs,
 };
 
-#ifndef MAINTENANCE_IN_CMD
-#define MAINTENANCE_IN_CMD 0xa3
-#endif
-
-static void rcf_set_defaults(struct blk_scsi_cmd_filter *filter)
-{
-	/* Basic read-only commands */
-	__set_bit(TEST_UNIT_READY, filter->read_ok);
-	__set_bit(REQUEST_SENSE, filter->read_ok);
-	__set_bit(READ_6, filter->read_ok);
-	__set_bit(READ_10, filter->read_ok);
-	__set_bit(READ_12, filter->read_ok);
-	__set_bit(READ_16, filter->read_ok);
-	__set_bit(READ_BUFFER, filter->read_ok);
-	__set_bit(READ_DEFECT_DATA, filter->read_ok);
-	__set_bit(READ_CAPACITY, filter->read_ok);
-	__set_bit(READ_LONG, filter->read_ok);
-	__set_bit(INQUIRY, filter->read_ok);
-	__set_bit(MODE_SENSE, filter->read_ok);
-	__set_bit(MODE_SENSE_10, filter->read_ok);
-	__set_bit(LOG_SENSE, filter->read_ok);
-	__set_bit(START_STOP, filter->read_ok);
-	__set_bit(GPCMD_VERIFY_10, filter->read_ok);
-	__set_bit(VERIFY_16, filter->read_ok);
-	__set_bit(REPORT_LUNS, filter->read_ok);
-	__set_bit(SERVICE_ACTION_IN, filter->read_ok);
-	__set_bit(RECEIVE_DIAGNOSTIC, filter->read_ok);
-	__set_bit(MAINTENANCE_IN_CMD, filter->read_ok);
-	__set_bit(GPCMD_READ_BUFFER_CAPACITY, filter->read_ok);
-
-	/* Audio CD commands */
-	__set_bit(GPCMD_PLAY_CD, filter->read_ok);
-	__set_bit(GPCMD_PLAY_AUDIO_10, filter->read_ok);
-	__set_bit(GPCMD_PLAY_AUDIO_MSF, filter->read_ok);
-	__set_bit(GPCMD_PLAY_AUDIO_TI, filter->read_ok);
-	__set_bit(GPCMD_PAUSE_RESUME, filter->read_ok);
-
-	/* CD/DVD data reading */
-	__set_bit(GPCMD_READ_CD, filter->read_ok);
-	__set_bit(GPCMD_READ_CD_MSF, filter->read_ok);
-	__set_bit(GPCMD_READ_DISC_INFO, filter->read_ok);
-	__set_bit(GPCMD_READ_CDVD_CAPACITY, filter->read_ok);
-	__set_bit(GPCMD_READ_DVD_STRUCTURE, filter->read_ok);
-	__set_bit(GPCMD_READ_HEADER, filter->read_ok);
-	__set_bit(GPCMD_READ_TRACK_RZONE_INFO, filter->read_ok);
-	__set_bit(GPCMD_READ_SUBCHANNEL, filter->read_ok);
-	__set_bit(GPCMD_READ_TOC_PMA_ATIP, filter->read_ok);
-	__set_bit(GPCMD_REPORT_KEY, filter->read_ok);
-	__set_bit(GPCMD_SCAN, filter->read_ok);
-	__set_bit(GPCMD_GET_CONFIGURATION, filter->read_ok);
-	__set_bit(GPCMD_READ_FORMAT_CAPACITIES, filter->read_ok);
-	__set_bit(GPCMD_GET_EVENT_STATUS_NOTIFICATION, filter->read_ok);
-	__set_bit(GPCMD_GET_PERFORMANCE, filter->read_ok);
-	__set_bit(GPCMD_SEEK, filter->read_ok);
-	__set_bit(GPCMD_STOP_PLAY_SCAN, filter->read_ok);
-
-	/* Basic writing commands */
-	__set_bit(WRITE_6, filter->write_ok);
-	__set_bit(WRITE_10, filter->write_ok);
-	__set_bit(WRITE_VERIFY, filter->write_ok);
-	__set_bit(WRITE_12, filter->write_ok);
-	__set_bit(WRITE_VERIFY_12, filter->write_ok);
-	__set_bit(WRITE_16, filter->write_ok);
-	__set_bit(WRITE_LONG, filter->write_ok);
-	__set_bit(WRITE_LONG_2, filter->write_ok);
-	__set_bit(ERASE, filter->write_ok);
-	__set_bit(GPCMD_MODE_SELECT_10, filter->write_ok);
-	__set_bit(MODE_SELECT, filter->write_ok);
-	__set_bit(LOG_SELECT, filter->write_ok);
-	__set_bit(GPCMD_BLANK, filter->write_ok);
-	__set_bit(GPCMD_CLOSE_TRACK, filter->write_ok);
-	__set_bit(GPCMD_FLUSH_CACHE, filter->write_ok);
-	__set_bit(GPCMD_FORMAT_UNIT, filter->write_ok);
-	__set_bit(GPCMD_REPAIR_RZONE_TRACK, filter->write_ok);
-	__set_bit(GPCMD_RESERVE_RZONE_TRACK, filter->write_ok);
-	__set_bit(GPCMD_SEND_DVD_STRUCTURE, filter->write_ok);
-	__set_bit(GPCMD_SEND_EVENT, filter->write_ok);
-	__set_bit(GPCMD_SEND_KEY, filter->write_ok);
-	__set_bit(GPCMD_SEND_OPC, filter->write_ok);
-	__set_bit(GPCMD_SEND_CUE_SHEET, filter->write_ok);
-	__set_bit(GPCMD_SET_SPEED, filter->write_ok);
-	__set_bit(GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, filter->write_ok);
-	__set_bit(GPCMD_LOAD_UNLOAD, filter->write_ok);
-	__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
-}
-
 int blk_register_filter(struct gendisk *disk)
 {
 	int ret;
-	struct blk_scsi_cmd_filter *filter = &disk->cmd_filter;
+	struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
 	struct kobject *parent = kobject_get(disk->holder_dir->parent);
 
 	if (!parent)
 		return -ENODEV;
 
 	ret = kobject_init_and_add(&filter->kobj, &rcf_ktype, parent,
-				 "%s", "cmd_filter");
+				   "%s", "cmd_filter");
 
 	if (ret < 0)
 		return ret;
 
-	rcf_set_defaults(filter);
 	return 0;
 }
+EXPORT_SYMBOL(blk_register_filter);
 
 void blk_unregister_filter(struct gendisk *disk)
 {
-	struct blk_scsi_cmd_filter *filter = &disk->cmd_filter;
+	struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
 
 	kobject_put(&filter->kobj);
 	kobject_put(disk->holder_dir->parent);
 }
-
+EXPORT_SYMBOL(blk_unregister_filter);
+#endif
diff --git a/block/genhd.c b/block/genhd.c
index c13cc77291a..e0ce23ac2ec 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -190,7 +190,6 @@ void add_disk(struct gendisk *disk)
 			    disk->minors, NULL, exact_match, exact_lock, disk);
 	register_disk(disk);
 	blk_register_queue(disk);
-	blk_register_filter(disk);
 
 	bdi = &disk->queue->backing_dev_info;
 	bdi_register_dev(bdi, MKDEV(disk->major, disk->first_minor));
@@ -203,7 +202,6 @@ EXPORT_SYMBOL(del_gendisk);	/* in partitions/check.c */
 
 void unlink_gendisk(struct gendisk *disk)
 {
-	blk_unregister_filter(disk);
 	sysfs_remove_link(&disk->dev.kobj, "bdi");
 	bdi_unregister(&disk->queue->backing_dev_info);
 	blk_unregister_queue(disk);
@@ -293,27 +291,30 @@ void __init printk_all_partitions(void)
 /* iterator */
 static int find_start(struct device *dev, void *data)
 {
-	loff_t k = *(loff_t *)data;
+	loff_t *k = data;
 
 	if (dev->type != &disk_type)
 		return 0;
-	if (!k--)
+	if (!*k)
 		return 1;
+	(*k)--;
 	return 0;
 }
 
 static void *part_start(struct seq_file *part, loff_t *pos)
 {
 	struct device *dev;
-	loff_t n = *pos;
+	loff_t k = *pos;
 
-	if (!n)
-		seq_puts(part, "major minor  #blocks  name\n\n");
+	if (!k)
+		part->private = (void *)1LU;	/* tell show to print header */
 
 	mutex_lock(&block_class_lock);
-	dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
-	if (dev)
+	dev = class_find_device(&block_class, NULL, &k, find_start);
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -330,8 +331,10 @@ static void *part_next(struct seq_file *part, void *v, loff_t *pos)
 	struct device *dev;
 	++*pos;
 	dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
-	if (dev)
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -346,6 +349,17 @@ static int show_partition(struct seq_file *part, void *v)
 	int n;
 	char buf[BDEVNAME_SIZE];
 
+	/*
+	 * Print header if start told us to do.  This is to preserve
+	 * the original behavior of not printing header if no
+	 * partition exists.  This hackery will be removed later with
+	 * class iteration clean up.
+	 */
+	if (part->private) {
+		seq_puts(part, "major minor  #blocks  name\n\n");
+		part->private = NULL;
+	}
+
 	/* Don't show non-partitionable removeable devices or empty devices */
 	if (!get_capacity(sgp) ||
 			(sgp->minors == 1 && (sgp->flags & GENHD_FL_REMOVABLE)))
@@ -568,11 +582,14 @@ static struct device_type disk_type = {
 static void *diskstats_start(struct seq_file *part, loff_t *pos)
 {
 	struct device *dev;
+	loff_t k = *pos;
 
 	mutex_lock(&block_class_lock);
-	dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
-	if (dev)
+	dev = class_find_device(&block_class, NULL, &k, find_start);
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -583,8 +600,10 @@ static void *diskstats_next(struct seq_file *part, void *v, loff_t *pos)
 
 	++*pos;
 	dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
-	if (dev)
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -712,10 +731,12 @@ dev_t blk_lookup_devt(const char *name, int part)
 	mutex_lock(&block_class_lock);
 	find.name = name;
 	find.part = part;
-	dev = class_find_device(&block_class, NULL, (void *)&find, match_id);
-	if (dev)
+	dev = class_find_device(&block_class, NULL, &find, match_id);
+	if (dev) {
+		put_device(dev);
 		devt = MKDEV(MAJOR(dev->devt),
 			     MINOR(dev->devt) + part);
+	}
 	mutex_unlock(&block_class_lock);
 
 	return devt;
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index c5b9bcfc0a6..ec4b7f23462 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -105,12 +105,96 @@ static int sg_emulated_host(struct request_queue *q, int __user *p)
 	return put_user(1, p);
 }
 
+void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
+{
+	/* Basic read-only commands */
+	__set_bit(TEST_UNIT_READY, filter->read_ok);
+	__set_bit(REQUEST_SENSE, filter->read_ok);
+	__set_bit(READ_6, filter->read_ok);
+	__set_bit(READ_10, filter->read_ok);
+	__set_bit(READ_12, filter->read_ok);
+	__set_bit(READ_16, filter->read_ok);
+	__set_bit(READ_BUFFER, filter->read_ok);
+	__set_bit(READ_DEFECT_DATA, filter->read_ok);
+	__set_bit(READ_CAPACITY, filter->read_ok);
+	__set_bit(READ_LONG, filter->read_ok);
+	__set_bit(INQUIRY, filter->read_ok);
+	__set_bit(MODE_SENSE, filter->read_ok);
+	__set_bit(MODE_SENSE_10, filter->read_ok);
+	__set_bit(LOG_SENSE, filter->read_ok);
+	__set_bit(START_STOP, filter->read_ok);
+	__set_bit(GPCMD_VERIFY_10, filter->read_ok);
+	__set_bit(VERIFY_16, filter->read_ok);
+	__set_bit(REPORT_LUNS, filter->read_ok);
+	__set_bit(SERVICE_ACTION_IN, filter->read_ok);
+	__set_bit(RECEIVE_DIAGNOSTIC, filter->read_ok);
+	__set_bit(MAINTENANCE_IN, filter->read_ok);
+	__set_bit(GPCMD_READ_BUFFER_CAPACITY, filter->read_ok);
+
+	/* Audio CD commands */
+	__set_bit(GPCMD_PLAY_CD, filter->read_ok);
+	__set_bit(GPCMD_PLAY_AUDIO_10, filter->read_ok);
+	__set_bit(GPCMD_PLAY_AUDIO_MSF, filter->read_ok);
+	__set_bit(GPCMD_PLAY_AUDIO_TI, filter->read_ok);
+	__set_bit(GPCMD_PAUSE_RESUME, filter->read_ok);
+
+	/* CD/DVD data reading */
+	__set_bit(GPCMD_READ_CD, filter->read_ok);
+	__set_bit(GPCMD_READ_CD_MSF, filter->read_ok);
+	__set_bit(GPCMD_READ_DISC_INFO, filter->read_ok);
+	__set_bit(GPCMD_READ_CDVD_CAPACITY, filter->read_ok);
+	__set_bit(GPCMD_READ_DVD_STRUCTURE, filter->read_ok);
+	__set_bit(GPCMD_READ_HEADER, filter->read_ok);
+	__set_bit(GPCMD_READ_TRACK_RZONE_INFO, filter->read_ok);
+	__set_bit(GPCMD_READ_SUBCHANNEL, filter->read_ok);
+	__set_bit(GPCMD_READ_TOC_PMA_ATIP, filter->read_ok);
+	__set_bit(GPCMD_REPORT_KEY, filter->read_ok);
+	__set_bit(GPCMD_SCAN, filter->read_ok);
+	__set_bit(GPCMD_GET_CONFIGURATION, filter->read_ok);
+	__set_bit(GPCMD_READ_FORMAT_CAPACITIES, filter->read_ok);
+	__set_bit(GPCMD_GET_EVENT_STATUS_NOTIFICATION, filter->read_ok);
+	__set_bit(GPCMD_GET_PERFORMANCE, filter->read_ok);
+	__set_bit(GPCMD_SEEK, filter->read_ok);
+	__set_bit(GPCMD_STOP_PLAY_SCAN, filter->read_ok);
+
+	/* Basic writing commands */
+	__set_bit(WRITE_6, filter->write_ok);
+	__set_bit(WRITE_10, filter->write_ok);
+	__set_bit(WRITE_VERIFY, filter->write_ok);
+	__set_bit(WRITE_12, filter->write_ok);
+	__set_bit(WRITE_VERIFY_12, filter->write_ok);
+	__set_bit(WRITE_16, filter->write_ok);
+	__set_bit(WRITE_LONG, filter->write_ok);
+	__set_bit(WRITE_LONG_2, filter->write_ok);
+	__set_bit(ERASE, filter->write_ok);
+	__set_bit(GPCMD_MODE_SELECT_10, filter->write_ok);
+	__set_bit(MODE_SELECT, filter->write_ok);
+	__set_bit(LOG_SELECT, filter->write_ok);
+	__set_bit(GPCMD_BLANK, filter->write_ok);
+	__set_bit(GPCMD_CLOSE_TRACK, filter->write_ok);
+	__set_bit(GPCMD_FLUSH_CACHE, filter->write_ok);
+	__set_bit(GPCMD_FORMAT_UNIT, filter->write_ok);
+	__set_bit(GPCMD_REPAIR_RZONE_TRACK, filter->write_ok);
+	__set_bit(GPCMD_RESERVE_RZONE_TRACK, filter->write_ok);
+	__set_bit(GPCMD_SEND_DVD_STRUCTURE, filter->write_ok);
+	__set_bit(GPCMD_SEND_EVENT, filter->write_ok);
+	__set_bit(GPCMD_SEND_KEY, filter->write_ok);
+	__set_bit(GPCMD_SEND_OPC, filter->write_ok);
+	__set_bit(GPCMD_SEND_CUE_SHEET, filter->write_ok);
+	__set_bit(GPCMD_SET_SPEED, filter->write_ok);
+	__set_bit(GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, filter->write_ok);
+	__set_bit(GPCMD_LOAD_UNLOAD, filter->write_ok);
+	__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
+}
+EXPORT_SYMBOL_GPL(blk_set_cmd_filter_defaults);
+
 static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
 			     struct sg_io_hdr *hdr, struct file *file)
 {
 	if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len))
 		return -EFAULT;
-	if (blk_verify_command(file, rq->cmd))
+	if (blk_verify_command(&q->cmd_filter, rq->cmd,
+			       file->f_mode & FMODE_WRITE))
 		return -EPERM;
 
 	/*
@@ -298,7 +382,7 @@ int sg_scsi_ioctl(struct file *file, struct request_queue *q,
 		  struct gendisk *disk, struct scsi_ioctl_command __user *sic)
 {
 	struct request *rq;
-	int err;
+	int err, write_perm = 0;
 	unsigned int in_len, out_len, bytes, opcode, cmdlen;
 	char *buffer = NULL, sense[SCSI_SENSE_BUFFERSIZE];
 
@@ -340,7 +424,11 @@ int sg_scsi_ioctl(struct file *file, struct request_queue *q,
 	if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len))
 		goto error;
 
-	err = blk_verify_command(file, rq->cmd);
+	/* scsi_ioctl passes NULL */
+	if (file && (file->f_mode & FMODE_WRITE))
+		write_perm = 1;
+
+	err = blk_verify_command(&q->cmd_filter, rq->cmd, write_perm);
 	if (err)
 		goto error;
 
@@ -518,7 +606,7 @@ int scsi_cmd_ioctl(struct file *file, struct request_queue *q,
 			hdr.sbp = cgc.sense;
 			if (hdr.sbp)
 				hdr.mx_sb_len = sizeof(struct request_sense);
-			hdr.timeout = cgc.timeout;
+			hdr.timeout = jiffies_to_msecs(cgc.timeout);
 			hdr.cmdp = ((struct cdrom_generic_command __user*) arg)->cmd;
 			hdr.cmd_len = sizeof(cgc.cmd);
 
diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c
index 85eaf7b1c53..e8362c1efa3 100644
--- a/crypto/async_tx/async_tx.c
+++ b/crypto/async_tx/async_tx.c
@@ -137,7 +137,8 @@ async_tx_run_dependencies(struct dma_async_tx_descriptor *tx)
 		spin_lock_bh(&next->lock);
 		next->parent = NULL;
 		_next = next->next;
-		next->next = NULL;
+		if (_next && _next->chan == chan)
+			next->next = NULL;
 		spin_unlock_bh(&next->lock);
 
 		next->tx_submit(next);
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 65974c6d3d7..c029d3eb9ef 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -263,11 +263,12 @@ async_xor_zero_sum(struct page *dest, struct page **src_list,
 		if (unlikely(!tx)) {
 			async_tx_quiesce(&depend_tx);
 
-			while (!tx)
+			while (!tx) {
 				dma_async_issue_pending(chan);
 				tx = device->device_prep_dma_zero_sum(chan,
 					dma_src, src_cnt, len, result,
 					dma_prep_flags);
+			}
 		}
 
 		async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
diff --git a/crypto/authenc.c b/crypto/authenc.c
index 4b226768752..fd9f06c63d7 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -174,8 +174,9 @@ static int crypto_authenc_genicv(struct aead_request *req, u8 *iv,
 static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
 					int err)
 {
+	struct aead_request *areq = req->data;
+
 	if (!err) {
-		struct aead_request *areq = req->data;
 		struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
 		struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
 		struct ablkcipher_request *abreq = aead_request_ctx(areq);
@@ -185,7 +186,7 @@ static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
 		err = crypto_authenc_genicv(areq, iv, 0);
 	}
 
-	aead_request_complete(req->data, err);
+	aead_request_complete(areq, err);
 }
 
 static int crypto_authenc_encrypt(struct aead_request *req)
@@ -216,14 +217,15 @@ static int crypto_authenc_encrypt(struct aead_request *req)
 static void crypto_authenc_givencrypt_done(struct crypto_async_request *req,
 					   int err)
 {
+	struct aead_request *areq = req->data;
+
 	if (!err) {
-		struct aead_request *areq = req->data;
 		struct skcipher_givcrypt_request *greq = aead_request_ctx(areq);
 
 		err = crypto_authenc_genicv(areq, greq->giv, 0);
 	}
 
-	aead_request_complete(req->data, err);
+	aead_request_complete(areq, err);
 }
 
 static int crypto_authenc_givencrypt(struct aead_givcrypt_request *req)
diff --git a/crypto/camellia.c b/crypto/camellia.c
index b1cc4de6493..493fee7e0a8 100644
--- a/crypto/camellia.c
+++ b/crypto/camellia.c
@@ -35,8 +35,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/bitops.h>
-#include <asm/unaligned.h>
 
 static const u32 camellia_sp1110[256] = {
 	0x70707000,0x82828200,0x2c2c2c00,0xececec00,
@@ -337,6 +335,20 @@ static const u32 camellia_sp4404[256] = {
 /*
  *  macros
  */
+#define GETU32(v, pt) \
+    do { \
+	/* latest breed of gcc is clever enough to use move */ \
+	memcpy(&(v), (pt), 4); \
+	(v) = be32_to_cpu(v); \
+    } while(0)
+
+/* rotation right shift 1byte */
+#define ROR8(x) (((x) >> 8) + ((x) << 24))
+/* rotation left shift 1bit */
+#define ROL1(x) (((x) << 1) + ((x) >> 31))
+/* rotation left shift 1byte */
+#define ROL8(x) (((x) << 8) + ((x) >> 24))
+
 #define ROLDQ(ll, lr, rl, rr, w0, w1, bits)		\
     do {						\
 	w0 = ll;					\
@@ -371,7 +383,7 @@ static const u32 camellia_sp4404[256] = {
 	   ^ camellia_sp3033[(u8)(il >> 8)]			\
 	   ^ camellia_sp4404[(u8)(il     )];			\
 	yl ^= yr;						\
-	yr = ror32(yr, 8);					\
+	yr = ROR8(yr);						\
 	yr ^= yl;						\
     } while(0)
 
@@ -393,7 +405,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[7] ^= subL[1]; subR[7] ^= subR[1];
 	subL[1] ^= subR[1] & ~subR[9];
 	dw = subL[1] & subL[9],
-		subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl2) */
+		subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */
 	/* round 8 */
 	subL[11] ^= subL[1]; subR[11] ^= subR[1];
 	/* round 10 */
@@ -402,7 +414,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[15] ^= subL[1]; subR[15] ^= subR[1];
 	subL[1] ^= subR[1] & ~subR[17];
 	dw = subL[1] & subL[17],
-		subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl4) */
+		subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */
 	/* round 14 */
 	subL[19] ^= subL[1]; subR[19] ^= subR[1];
 	/* round 16 */
@@ -418,7 +430,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	} else {
 		subL[1] ^= subR[1] & ~subR[25];
 		dw = subL[1] & subL[25],
-			subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl6) */
+			subR[1] ^= ROL1(dw); /* modified for FLinv(kl6) */
 		/* round 20 */
 		subL[27] ^= subL[1]; subR[27] ^= subR[1];
 		/* round 22 */
@@ -438,7 +450,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 		subL[26] ^= kw4l; subR[26] ^= kw4r;
 		kw4l ^= kw4r & ~subR[24];
 		dw = kw4l & subL[24],
-			kw4r ^= rol32(dw, 1); /* modified for FL(kl5) */
+			kw4r ^= ROL1(dw); /* modified for FL(kl5) */
 	}
 	/* round 17 */
 	subL[22] ^= kw4l; subR[22] ^= kw4r;
@@ -448,7 +460,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[18] ^= kw4l; subR[18] ^= kw4r;
 	kw4l ^= kw4r & ~subR[16];
 	dw = kw4l & subL[16],
-		kw4r ^= rol32(dw, 1); /* modified for FL(kl3) */
+		kw4r ^= ROL1(dw); /* modified for FL(kl3) */
 	/* round 11 */
 	subL[14] ^= kw4l; subR[14] ^= kw4r;
 	/* round 9 */
@@ -457,7 +469,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[10] ^= kw4l; subR[10] ^= kw4r;
 	kw4l ^= kw4r & ~subR[8];
 	dw = kw4l & subL[8],
-		kw4r ^= rol32(dw, 1); /* modified for FL(kl1) */
+		kw4r ^= ROL1(dw); /* modified for FL(kl1) */
 	/* round 5 */
 	subL[6] ^= kw4l; subR[6] ^= kw4r;
 	/* round 3 */
@@ -482,7 +494,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(6) = subR[5] ^ subR[7];
 	tl = subL[10] ^ (subR[10] & ~subR[8]);
 	dw = tl & subL[8],  /* FL(kl1) */
-		tr = subR[10] ^ rol32(dw, 1);
+		tr = subR[10] ^ ROL1(dw);
 	SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */
 	SUBKEY_R(7) = subR[6] ^ tr;
 	SUBKEY_L(8) = subL[8];       /* FL(kl1) */
@@ -491,7 +503,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(9) = subR[9];
 	tl = subL[7] ^ (subR[7] & ~subR[9]);
 	dw = tl & subL[9],  /* FLinv(kl2) */
-		tr = subR[7] ^ rol32(dw, 1);
+		tr = subR[7] ^ ROL1(dw);
 	SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */
 	SUBKEY_R(10) = tr ^ subR[11];
 	SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */
@@ -504,7 +516,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(14) = subR[13] ^ subR[15];
 	tl = subL[18] ^ (subR[18] & ~subR[16]);
 	dw = tl & subL[16], /* FL(kl3) */
-		tr = subR[18] ^ rol32(dw, 1);
+		tr = subR[18] ^ ROL1(dw);
 	SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */
 	SUBKEY_R(15) = subR[14] ^ tr;
 	SUBKEY_L(16) = subL[16];     /* FL(kl3) */
@@ -513,7 +525,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(17) = subR[17];
 	tl = subL[15] ^ (subR[15] & ~subR[17]);
 	dw = tl & subL[17], /* FLinv(kl4) */
-		tr = subR[15] ^ rol32(dw, 1);
+		tr = subR[15] ^ ROL1(dw);
 	SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */
 	SUBKEY_R(18) = tr ^ subR[19];
 	SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */
@@ -532,7 +544,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	} else {
 		tl = subL[26] ^ (subR[26] & ~subR[24]);
 		dw = tl & subL[24], /* FL(kl5) */
-			tr = subR[26] ^ rol32(dw, 1);
+			tr = subR[26] ^ ROL1(dw);
 		SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */
 		SUBKEY_R(23) = subR[22] ^ tr;
 		SUBKEY_L(24) = subL[24];     /* FL(kl5) */
@@ -541,7 +553,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 		SUBKEY_R(25) = subR[25];
 		tl = subL[23] ^ (subR[23] & ~subR[25]);
 		dw = tl & subL[25], /* FLinv(kl6) */
-			tr = subR[23] ^ rol32(dw, 1);
+			tr = subR[23] ^ ROL1(dw);
 		SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */
 		SUBKEY_R(26) = tr ^ subR[27];
 		SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */
@@ -561,17 +573,17 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	/* apply the inverse of the last half of P-function */
 	i = 2;
 	do {
-		dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = rol32(dw, 8);/* round 1 */
+		dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = ROL8(dw);/* round 1 */
 		SUBKEY_R(i + 0) = SUBKEY_L(i + 0) ^ dw; SUBKEY_L(i + 0) = dw;
-		dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = rol32(dw, 8);/* round 2 */
+		dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = ROL8(dw);/* round 2 */
 		SUBKEY_R(i + 1) = SUBKEY_L(i + 1) ^ dw; SUBKEY_L(i + 1) = dw;
-		dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = rol32(dw, 8);/* round 3 */
+		dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = ROL8(dw);/* round 3 */
 		SUBKEY_R(i + 2) = SUBKEY_L(i + 2) ^ dw; SUBKEY_L(i + 2) = dw;
-		dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = rol32(dw, 8);/* round 4 */
+		dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = ROL8(dw);/* round 4 */
 		SUBKEY_R(i + 3) = SUBKEY_L(i + 3) ^ dw; SUBKEY_L(i + 3) = dw;
-		dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = rol32(dw, 9);/* round 5 */
+		dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = ROL8(dw);/* round 5 */
 		SUBKEY_R(i + 4) = SUBKEY_L(i + 4) ^ dw; SUBKEY_L(i + 4) = dw;
-		dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = rol32(dw, 8);/* round 6 */
+		dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = ROL8(dw);/* round 6 */
 		SUBKEY_R(i + 5) = SUBKEY_L(i + 5) ^ dw; SUBKEY_L(i + 5) = dw;
 		i += 8;
 	} while (i < max);
@@ -587,10 +599,10 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey)
 	/**
 	 *  k == kll || klr || krl || krr (|| is concatenation)
 	 */
-	kll = get_unaligned_be32(key);
-	klr = get_unaligned_be32(key + 4);
-	krl = get_unaligned_be32(key + 8);
-	krr = get_unaligned_be32(key + 12);
+	GETU32(kll, key     );
+	GETU32(klr, key +  4);
+	GETU32(krl, key +  8);
+	GETU32(krr, key + 12);
 
 	/* generate KL dependent subkeys */
 	/* kw1 */
@@ -695,14 +707,14 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey)
 	 *  key = (kll || klr || krl || krr || krll || krlr || krrl || krrr)
 	 *  (|| is concatenation)
 	 */
-	kll = get_unaligned_be32(key);
-	klr = get_unaligned_be32(key + 4);
-	krl = get_unaligned_be32(key + 8);
-	krr = get_unaligned_be32(key + 12);
-	krll = get_unaligned_be32(key + 16);
-	krlr = get_unaligned_be32(key + 20);
-	krrl = get_unaligned_be32(key + 24);
-	krrr = get_unaligned_be32(key + 28);
+	GETU32(kll,  key     );
+	GETU32(klr,  key +  4);
+	GETU32(krl,  key +  8);
+	GETU32(krr,  key + 12);
+	GETU32(krll, key + 16);
+	GETU32(krlr, key + 20);
+	GETU32(krrl, key + 24);
+	GETU32(krrr, key + 28);
 
 	/* generate KL dependent subkeys */
 	/* kw1 */
@@ -858,13 +870,13 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey)
 	t0 &= ll;							\
 	t2 |= rr;							\
 	rl ^= t2;							\
-	lr ^= rol32(t0, 1);						\
+	lr ^= ROL1(t0);							\
 	t3 = krl;							\
 	t1 = klr;							\
 	t3 &= rl;							\
 	t1 |= lr;							\
 	ll ^= t1;							\
-	rr ^= rol32(t3, 1);						\
+	rr ^= ROL1(t3);							\
     } while(0)
 
 #define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir)		\
@@ -880,7 +892,7 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey)
 	il ^= kl;							\
 	ir ^= il ^ kr;							\
 	yl ^= ir;							\
-	yr ^= ror32(il, 8) ^ ir;						\
+	yr ^= ROR8(il) ^ ir;						\
     } while(0)
 
 /* max = 24: 128bit encrypt, max = 32: 256bit encrypt */
diff --git a/crypto/digest.c b/crypto/digest.c
index ac0919460d1..5d3f1303da9 100644
--- a/crypto/digest.c
+++ b/crypto/digest.c
@@ -225,7 +225,7 @@ int crypto_init_digest_ops_async(struct crypto_tfm *tfm)
 	struct ahash_tfm  *crt  = &tfm->crt_ahash;
 	struct digest_alg *dalg = &tfm->__crt_alg->cra_digest;
 
-	if (dalg->dia_digestsize > crypto_tfm_alg_blocksize(tfm))
+	if (dalg->dia_digestsize > PAGE_SIZE / 8)
 		return -EINVAL;
 
 	crt->init       = digest_async_init;
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 59821a22d75..66368022e0b 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -481,21 +481,31 @@ next_one:
 
 			for (k = 0, temp = 0; k < template[i].np; k++) {
 				printk(KERN_INFO "page %u\n", k);
-				q = &axbuf[IDX[k]];
-				hexdump(q, template[i].tap[k]);
+				q = &xbuf[IDX[k]];
+
+				n = template[i].tap[k];
+				if (k == template[i].np - 1)
+					n += enc ? authsize : -authsize;
+				hexdump(q, n);
 				printk(KERN_INFO "%s\n",
-				       memcmp(q, template[i].result + temp,
-					      template[i].tap[k] -
-					      (k < template[i].np - 1 || enc ?
-					       0 : authsize)) ?
+				       memcmp(q, template[i].result + temp, n) ?
 				       "fail" : "pass");
 
-				for (n = 0; q[template[i].tap[k] + n]; n++)
-					;
+				q += n;
+				if (k == template[i].np - 1 && !enc) {
+					if (memcmp(q, template[i].input +
+						      temp + n, authsize))
+						n = authsize;
+					else
+						n = 0;
+				} else {
+					for (n = 0; q[n]; n++)
+						;
+				}
 				if (n) {
 					printk("Result buffer corruption %u "
 					       "bytes:\n", n);
-					hexdump(&q[template[i].tap[k]], n);
+					hexdump(q, n);
 				}
 
 				temp += template[i].tap[k];
diff --git a/drivers/Makefile b/drivers/Makefile
index 54ec5e718c0..2735bde7347 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
 obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_USB)		+= usb/
+obj-$(CONFIG_USB_MUSB_HDRC)	+= usb/musb/
 obj-$(CONFIG_PCI)		+= usb/
 obj-$(CONFIG_USB_GADGET)	+= usb/gadget/
 obj-$(CONFIG_SERIO)		+= input/serio/
@@ -97,3 +98,4 @@ obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_OF)		+= of/
 obj-$(CONFIG_SSB)		+= ssb/
 obj-$(CONFIG_VIRTIO)		+= virtio/
+obj-$(CONFIG_REGULATOR)		+= regulator/
diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c
index 44ad90c03c2..d3d0886d637 100644
--- a/drivers/acpi/asus_acpi.c
+++ b/drivers/acpi/asus_acpi.c
@@ -78,9 +78,9 @@ MODULE_LICENSE("GPL");
 static uid_t asus_uid;
 static gid_t asus_gid;
 module_param(asus_uid, uint, 0);
-MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus.\n");
+MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus");
 module_param(asus_gid, uint, 0);
-MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n");
+MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus");
 
 /* For each model, all features implemented, 
  * those marked with R are relative to HOTK, A for absolute */
diff --git a/drivers/acpi/dispatcher/dsobject.c b/drivers/acpi/dispatcher/dsobject.c
index 1022e38994c..0f280589921 100644
--- a/drivers/acpi/dispatcher/dsobject.c
+++ b/drivers/acpi/dispatcher/dsobject.c
@@ -496,7 +496,7 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 			arg = arg->common.next;
 		}
 
-		ACPI_ERROR((AE_INFO,
+		ACPI_WARNING((AE_INFO,
 			    "Package List length (%X) larger than NumElements count (%X), truncated\n",
 			    i, element_count));
 	} else if (i < element_count) {
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index bb7c51f712b..7d2edf143f1 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -563,9 +563,6 @@ EXPORT_SYMBOL_GPL(unregister_hotplug_dock_device);
  */
 static int handle_eject_request(struct dock_station *ds, u32 event)
 {
-	if (!dock_present(ds))
-		return -ENODEV;
-
 	if (dock_in_progress(ds))
 		return -EBUSY;
 
@@ -573,8 +570,16 @@ static int handle_eject_request(struct dock_station *ds, u32 event)
 	 * here we need to generate the undock
 	 * event prior to actually doing the undock
 	 * so that the device struct still exists.
+	 * Also, even send the dock event if the
+	 * device is not present anymore
 	 */
 	dock_event(ds, event, UNDOCK_EVENT);
+
+	if (!dock_present(ds)) {
+		complete_undock(ds);
+		return -ENODEV;
+	}
+
 	hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
 	undock(ds);
 	eject_dock(ds);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 5622aee996b..13593f9f219 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -110,6 +110,31 @@ static struct acpi_ec {
 	u8 handlers_installed;
 } *boot_ec, *first_ec;
 
+/* 
+ * Some Asus system have exchanged ECDT data/command IO addresses.
+ */
+static int print_ecdt_error(const struct dmi_system_id *id)
+{
+	printk(KERN_NOTICE PREFIX "%s detected - "
+		"ECDT has exchanged control/data I/O address\n",
+		id->ident);
+	return 0;
+}
+
+static struct dmi_system_id __cpuinitdata ec_dmi_table[] = {
+	{
+	print_ecdt_error, "Asus L4R", {
+	DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
+	DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
+	{
+	print_ecdt_error, "Asus M6R", {
+	DMI_MATCH(DMI_BIOS_VERSION, "0207"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
+	DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
+	{},
+};
+
 /* --------------------------------------------------------------------------
                              Transaction Management
    -------------------------------------------------------------------------- */
@@ -196,6 +221,8 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
 				return 0;
 			msleep(1);
 		}
+		if (acpi_ec_check_status(ec,event))
+			return 0;
 	}
 	pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n",
 		acpi_ec_read_status(ec),
@@ -911,6 +938,15 @@ int __init acpi_ec_ecdt_probe(void)
 		pr_info(PREFIX "EC description table is found, configuring boot EC\n");
 		boot_ec->command_addr = ecdt_ptr->control.address;
 		boot_ec->data_addr = ecdt_ptr->data.address;
+		if (dmi_check_system(ec_dmi_table)) {
+			/*
+			 * If the board falls into ec_dmi_table, it means
+			 * that ECDT table gives the incorrect command/status
+			 * & data I/O address. Just fix it.
+			 */
+			boot_ec->data_addr = ecdt_ptr->control.address;
+			boot_ec->command_addr = ecdt_ptr->data.address;
+		}
 		boot_ec->gpe = ecdt_ptr->gpe;
 		boot_ec->handle = ACPI_ROOT_OBJECT;
 		acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c
index 2a32c843cb4..8892b9824fa 100644
--- a/drivers/acpi/executer/exconfig.c
+++ b/drivers/acpi/executer/exconfig.c
@@ -479,5 +479,8 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 
 	acpi_tb_set_table_loaded_flag(table_index, FALSE);
 
+	/* Table unloaded, remove a reference to the ddb_handle object */
+
+	acpi_ut_remove_reference(ddb_handle);
 	return_ACPI_STATUS(AE_OK);
 }
diff --git a/drivers/acpi/namespace/nsnames.c b/drivers/acpi/namespace/nsnames.c
index 549db42f16c..bd577387800 100644
--- a/drivers/acpi/namespace/nsnames.c
+++ b/drivers/acpi/namespace/nsnames.c
@@ -56,13 +56,14 @@ ACPI_MODULE_NAME("nsnames")
  *              Size            - Size of the pathname
  *              *name_buffer    - Where to return the pathname
  *
- * RETURN:      Places the pathname into the name_buffer, in external format
+ * RETURN:      Status
+ *              Places the pathname into the name_buffer, in external format
  *              (name segments separated by path separators)
  *
  * DESCRIPTION: Generate a full pathaname
  *
  ******************************************************************************/
-void
+acpi_status
 acpi_ns_build_external_path(struct acpi_namespace_node *node,
 			    acpi_size size, char *name_buffer)
 {
@@ -77,7 +78,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 	if (index < ACPI_NAME_SIZE) {
 		name_buffer[0] = AML_ROOT_PREFIX;
 		name_buffer[1] = 0;
-		return;
+		return (AE_OK);
 	}
 
 	/* Store terminator byte, then build name backwards */
@@ -105,11 +106,13 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 
 	if (index != 0) {
 		ACPI_ERROR((AE_INFO,
-			    "Could not construct pathname; index=%X, size=%X, Path=%s",
+			    "Could not construct external pathname; index=%X, size=%X, Path=%s",
 			    (u32) index, (u32) size, &name_buffer[size]));
+
+		return (AE_BAD_PARAMETER);
 	}
 
-	return;
+	return (AE_OK);
 }
 
 #ifdef ACPI_DEBUG_OUTPUT
@@ -129,6 +132,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 
 char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 {
+	acpi_status status;
 	char *name_buffer;
 	acpi_size size;
 
@@ -138,8 +142,7 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
 	size = acpi_ns_get_pathname_length(node);
 	if (!size) {
-		ACPI_ERROR((AE_INFO, "Invalid node failure"));
-		return_PTR(NULL);
+		return (NULL);
 	}
 
 	/* Allocate a buffer to be returned to caller */
@@ -152,7 +155,11 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
 	/* Build the path in the allocated buffer */
 
-	acpi_ns_build_external_path(node, size, name_buffer);
+	status = acpi_ns_build_external_path(node, size, name_buffer);
+	if (ACPI_FAILURE(status)) {
+		return (NULL);
+	}
+
 	return_PTR(name_buffer);
 }
 #endif
@@ -186,7 +193,7 @@ acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node)
 	while (next_node && (next_node != acpi_gbl_root_node)) {
 		if (ACPI_GET_DESCRIPTOR_TYPE(next_node) != ACPI_DESC_TYPE_NAMED) {
 			ACPI_ERROR((AE_INFO,
-				    "Invalid NS Node (%p) while traversing path",
+				    "Invalid Namespace Node (%p) while traversing namespace",
 				    next_node));
 			return 0;
 		}
@@ -234,8 +241,7 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle,
 
 	required_size = acpi_ns_get_pathname_length(node);
 	if (!required_size) {
-		ACPI_ERROR((AE_INFO, "Invalid node failure"));
-		return_ACPI_STATUS(AE_ERROR);
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
 	/* Validate/Allocate/Clear caller buffer */
@@ -247,7 +253,11 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle,
 
 	/* Build the path in the caller buffer */
 
-	acpi_ns_build_external_path(node, required_size, buffer->pointer);
+	status =
+	    acpi_ns_build_external_path(node, required_size, buffer->pointer);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
 
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X]\n",
 			  (char *)buffer->pointer, (u32) required_size));
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 89f3b2abfdc..cf47805a744 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -849,7 +849,7 @@ static int __init acpi_irq_penalty_update(char *str, int used)
 		if (irq < 0)
 			continue;
 
-		if (irq >= ACPI_MAX_IRQS)
+		if (irq >= ARRAY_SIZE(acpi_irq_penalty))
 			continue;
 
 		if (used)
@@ -872,10 +872,12 @@ static int __init acpi_irq_penalty_update(char *str, int used)
  */
 void acpi_penalize_isa_irq(int irq, int active)
 {
-	if (active)
-		acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
-	else
-		acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+	if (irq >= 0 && irq < ARRAY_SIZE(acpi_irq_penalty)) {
+		if (active)
+			acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
+		else
+			acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+	}
 }
 
 /*
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index e36422a7122..ee68ac54c0d 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -123,7 +123,7 @@ struct acpi_processor_errata errata __read_mostly;
 static int set_no_mwait(const struct dmi_system_id *id)
 {
 	printk(KERN_NOTICE PREFIX "%s detected - "
-		"disable mwait for CPU C-stetes\n", id->ident);
+		"disabling mwait for CPU C-states\n", id->ident);
 	idle_nomwait = 1;
 	return 0;
 }
@@ -138,7 +138,7 @@ static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
 	{
 	set_no_mwait, "Extensa 5220", {
 	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
-	DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
 	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
 	{},
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 283c08f5f4d..cf5b1b7b684 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -41,7 +41,6 @@
 #include <linux/pm_qos_params.h>
 #include <linux/clockchips.h>
 #include <linux/cpuidle.h>
-#include <linux/cpuidle.h>
 
 /*
  * Include the apic definitions for x86 to have the APIC timer related defines
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index b4749969c6b..80c251ec6d2 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -64,15 +64,21 @@ static DEFINE_MUTEX(performance_mutex);
  * policy is adjusted accordingly.
  */
 
-static unsigned int ignore_ppc = 0;
-module_param(ignore_ppc, uint, 0644);
+/* ignore_ppc:
+ * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet
+ *       ignore _PPC
+ *  0 -> cpufreq low level drivers initialized -> consider _PPC values
+ *  1 -> ignore _PPC totally -> forced by user through boot param
+ */
+static int ignore_ppc = -1;
+module_param(ignore_ppc, int, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 		 "limited by BIOS, this should help");
 
 #define PPC_REGISTERED   1
 #define PPC_IN_USE       2
 
-static int acpi_processor_ppc_status = 0;
+static int acpi_processor_ppc_status;
 
 static int acpi_processor_ppc_notifier(struct notifier_block *nb,
 				       unsigned long event, void *data)
@@ -81,13 +87,18 @@ static int acpi_processor_ppc_notifier(struct notifier_block *nb,
 	struct acpi_processor *pr;
 	unsigned int ppc = 0;
 
-	if (ignore_ppc)
+	if (event == CPUFREQ_START && ignore_ppc <= 0) {
+		ignore_ppc = 0;
 		return 0;
+	}
 
-	mutex_lock(&performance_mutex);
+	if (ignore_ppc)
+		return 0;
 
 	if (event != CPUFREQ_INCOMPATIBLE)
-		goto out;
+		return 0;
+
+	mutex_lock(&performance_mutex);
 
 	pr = per_cpu(processors, policy->cpu);
 	if (!pr || !pr->performance)
diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c
index f61ebc679e6..d9063ea414e 100644
--- a/drivers/acpi/resources/rscalc.c
+++ b/drivers/acpi/resources/rscalc.c
@@ -587,6 +587,9 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
 			} else {
 				temp_size_needed +=
 				    acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
+				if (!temp_size_needed) {
+					return_ACPI_STATUS(AE_BAD_PARAMETER);
+				}
 			}
 		} else {
 			/*
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index bcf2c70fca8..a4e3767b8c6 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -107,6 +107,13 @@ static int wait_transaction_complete(struct acpi_smb_hc *hc, int timeout)
 	if (wait_event_timeout(hc->wait, smb_check_done(hc),
 			       msecs_to_jiffies(timeout)))
 		return 0;
+	/*
+	 * After the timeout happens, OS will try to check the status of SMbus.
+	 * If the status is what OS expected, it will be regarded as the bogus
+	 * timeout.
+	 */
+	if (smb_check_done(hc))
+		return 0;
 	else
 		return -ETIME;
 }
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index c3419182c9a..775c97a282b 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -300,6 +300,8 @@ int __init acpi_table_init(void)
 
 static int __init acpi_parse_apic_instance(char *str)
 {
+	if (!str)
+		return -EINVAL;
 
 	acpi_apic_instance = simple_strtoul(str, NULL, 0);
 
diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c
index e7bf34a7b1d..7dcb67e0b21 100644
--- a/drivers/acpi/utilities/utalloc.c
+++ b/drivers/acpi/utilities/utalloc.c
@@ -242,10 +242,12 @@ acpi_ut_initialize_buffer(struct acpi_buffer * buffer,
 {
 	acpi_status status = AE_OK;
 
-	if (!required_length) {
-		WARN_ON(1);
-		return AE_ERROR;
+	/* Parameter validation */
+
+	if (!buffer || !required_length) {
+		return (AE_BAD_PARAMETER);
 	}
+
 	switch (buffer->length) {
 	case ACPI_NO_BUFFER:
 
diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c
index c5c791a575c..42609d3a8aa 100644
--- a/drivers/acpi/utilities/utdelete.c
+++ b/drivers/acpi/utilities/utdelete.c
@@ -135,6 +135,10 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
 		obj_pointer = object->package.elements;
 		break;
 
+		/*
+		 * These objects have a possible list of notify handlers.
+		 * Device object also may have a GPE block.
+		 */
 	case ACPI_TYPE_DEVICE:
 
 		if (object->device.gpe_block) {
@@ -142,9 +146,14 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
 						       gpe_block);
 		}
 
-		/* Walk the handler list for this device */
+		/*lint -fallthrough */
+
+	case ACPI_TYPE_PROCESSOR:
+	case ACPI_TYPE_THERMAL:
+
+		/* Walk the notify handler list for this object */
 
-		handler_desc = object->device.handler;
+		handler_desc = object->common_notify.handler;
 		while (handler_desc) {
 			next_desc = handler_desc->address_space.next;
 			acpi_ut_remove_reference(handler_desc);
diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
index e25484495e6..916eff399eb 100644
--- a/drivers/acpi/utilities/utobject.c
+++ b/drivers/acpi/utilities/utobject.c
@@ -425,6 +425,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object,
 			       acpi_size * obj_length)
 {
 	acpi_size length;
+	acpi_size size;
 	acpi_status status = AE_OK;
 
 	ACPI_FUNCTION_TRACE_PTR(ut_get_simple_object_size, internal_object);
@@ -484,10 +485,14 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object,
 			 * Get the actual length of the full pathname to this object.
 			 * The reference will be converted to the pathname to the object
 			 */
-			length +=
-			    ACPI_ROUND_UP_TO_NATIVE_WORD
-			    (acpi_ns_get_pathname_length
-			     (internal_object->reference.node));
+			size =
+			    acpi_ns_get_pathname_length(internal_object->
+							reference.node);
+			if (!size) {
+				return_ACPI_STATUS(AE_BAD_PARAMETER);
+			}
+
+			length += ACPI_ROUND_UP_TO_NATIVE_WORD(size);
 			break;
 
 		default:
diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c
index c33b1c6e93b..cfe2c833474 100644
--- a/drivers/acpi/wmi.c
+++ b/drivers/acpi/wmi.c
@@ -347,7 +347,7 @@ struct acpi_buffer *out)
 	strcpy(method, "WQ");
 	strncat(method, block->object_id, 2);
 
-	status = acpi_evaluate_object(handle, method, NULL, out);
+	status = acpi_evaluate_object(handle, method, &input, out);
 
 	/*
 	 * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ae8494944c4..11c8c19f0fb 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -448,8 +448,10 @@ config PATA_MARVELL
 	tristate "Marvell PATA support via legacy mode"
 	depends on PCI
 	help
-	  This option enables limited support for the Marvell 88SE6145 ATA
-	  controller.
+	  This option enables limited support for the Marvell 88SE61xx ATA
+	  controllers. If you wish to use only the SATA ports then select
+	  the AHCI driver alone. If you wish to the use the PATA port or
+	  both SATA and PATA include this driver.
 
 	  If unsure, say N.
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index ef3e5522e1a..2e1a7cb2ed5 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci_mv */
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
-				 AHCI_HFLAG_MV_PATA),
+				 AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
 		.pio_mask	= 0x1f, /* pio0-4 */
@@ -486,6 +486,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
 	{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+	{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -575,9 +579,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci },		/* MCP7B */
 
 	/* SiS */
-	{ PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp },		/* SiS 966 */
-	{ PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp },		/* SiS 968 */
-	{ PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp },		/* SiS 968 */
+	{ PCI_VDEVICE(SI, 0x1184), board_ahci },		/* SiS 966 */
+	{ PCI_VDEVICE(SI, 0x1185), board_ahci },		/* SiS 968 */
+	{ PCI_VDEVICE(SI, 0x0186), board_ahci },		/* SiS 968 */
 
 	/* Marvell */
 	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
@@ -608,6 +612,15 @@ module_param(ahci_em_messages, int, 0444);
 MODULE_PARM_DESC(ahci_em_messages,
 	"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
 
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+
 static inline int ahci_nr_ports(u32 cap)
 {
 	return (cap & 0x1f) + 1;
@@ -730,6 +743,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 			   "MV_AHCI HACK: port_map %x -> %x\n",
 			   port_map,
 			   port_map & mv);
+		dev_printk(KERN_ERR, &pdev->dev,
+			  "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
 
 		port_map &= mv;
 	}
@@ -2531,6 +2546,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* The AHCI driver can only drive the SATA ports, the PATA driver
+	   can drive them all so if both drivers are selected make sure
+	   AHCI stays out of the way */
+	if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+		return -ENODEV;
+
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a90ae03f56b..e6b4606e36b 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -250,6 +250,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* Mobile SATA Controller IDE (ICH8M), Apple */
 	{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
 	{ 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
+	{ 0x8086, 0x2828, 0x106b, 0x00a3, 0, 0, ich8m_apple_sata },
 	/* Mobile SATA Controller IDE (ICH8M) */
 	{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH9) */
@@ -274,6 +275,14 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH10) */
 	{ 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 
 	{ }	/* terminate list */
 };
@@ -1490,7 +1499,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	 * off.
 	 */
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
-		int rc = piix_disable_ahci(pdev);
+		rc = piix_disable_ahci(pdev);
 		if (rc)
 			return rc;
 	}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9bef1a84fe3..79e3a8e7a84 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -104,6 +104,7 @@ struct ata_force_param {
 	unsigned long	xfer_mask;
 	unsigned int	horkage_on;
 	unsigned int	horkage_off;
+	unsigned int	lflags;
 };
 
 struct ata_force_ent {
@@ -120,7 +121,7 @@ static char ata_force_param_buf[PAGE_SIZE] __initdata;
 module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
 MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
 
-int atapi_enabled = 1;
+static int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
 
@@ -196,22 +197,23 @@ void ata_force_cbl(struct ata_port *ap)
 }
 
 /**
- *	ata_force_spd_limit - force SATA spd limit according to libata.force
+ *	ata_force_link_limits - force link limits according to libata.force
  *	@link: ATA link of interest
  *
- *	Force SATA spd limit according to libata.force and whine about
- *	it.  When only the port part is specified (e.g. 1:), the limit
- *	applies to all links connected to both the host link and all
- *	fan-out ports connected via PMP.  If the device part is
- *	specified as 0 (e.g. 1.00:), it specifies the first fan-out
- *	link not the host link.  Device number 15 always points to the
- *	host link whether PMP is attached or not.
+ *	Force link flags and SATA spd limit according to libata.force
+ *	and whine about it.  When only the port part is specified
+ *	(e.g. 1:), the limit applies to all links connected to both
+ *	the host link and all fan-out ports connected via PMP.  If the
+ *	device part is specified as 0 (e.g. 1.00:), it specifies the
+ *	first fan-out link not the host link.  Device number 15 always
+ *	points to the host link whether PMP is attached or not.
  *
  *	LOCKING:
  *	EH context.
  */
-static void ata_force_spd_limit(struct ata_link *link)
+static void ata_force_link_limits(struct ata_link *link)
 {
+	bool did_spd = false;
 	int linkno, i;
 
 	if (ata_is_host_link(link))
@@ -228,13 +230,22 @@ static void ata_force_spd_limit(struct ata_link *link)
 		if (fe->device != -1 && fe->device != linkno)
 			continue;
 
-		if (!fe->param.spd_limit)
-			continue;
+		/* only honor the first spd limit */
+		if (!did_spd && fe->param.spd_limit) {
+			link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
+			ata_link_printk(link, KERN_NOTICE,
+					"FORCE: PHY spd limit set to %s\n",
+					fe->param.name);
+			did_spd = true;
+		}
 
-		link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
-		ata_link_printk(link, KERN_NOTICE,
-			"FORCE: PHY spd limit set to %s\n", fe->param.name);
-		return;
+		/* let lflags stack */
+		if (fe->param.lflags) {
+			link->flags |= fe->param.lflags;
+			ata_link_printk(link, KERN_NOTICE,
+					"FORCE: link flag 0x%x forced -> 0x%x\n",
+					fe->param.lflags, link->flags);
+		}
 	}
 }
 
@@ -1132,6 +1143,8 @@ void ata_id_string(const u16 *id, unsigned char *s,
 {
 	unsigned int c;
 
+	BUG_ON(len & 1);
+
 	while (len > 0) {
 		c = id[ofs] >> 8;
 		*s = c;
@@ -1165,8 +1178,6 @@ void ata_id_c_string(const u16 *id, unsigned char *s,
 {
 	unsigned char *p;
 
-	WARN_ON(!(len & 1));
-
 	ata_id_string(id, s, ofs, len - 1);
 
 	p = s + strnlen(s, len - 1);
@@ -1886,6 +1897,23 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
 }
 
 /**
+ *	ata_do_dev_read_id		-	default ID read method
+ *	@dev: device
+ *	@tf: proposed taskfile
+ *	@id: data buffer
+ *
+ *	Issue the identify taskfile and hand back the buffer containing
+ *	identify data. For some RAID controllers and for pre ATA devices
+ *	this function is wrapped or replaced by the driver
+ */
+unsigned int ata_do_dev_read_id(struct ata_device *dev,
+					struct ata_taskfile *tf, u16 *id)
+{
+	return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
+				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+}
+
+/**
  *	ata_dev_read_id - Read ID data from the specified device
  *	@dev: target device
  *	@p_class: pointer to class of the target device (may be changed)
@@ -1920,7 +1948,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	if (ata_msg_ctl(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
 
- retry:
+retry:
 	ata_tf_init(dev, &tf);
 
 	switch (class) {
@@ -1948,8 +1976,11 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	 */
 	tf.flags |= ATA_TFLAG_POLLING;
 
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
-				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+	if (ap->ops->read_id)
+		err_mask = ap->ops->read_id(dev, &tf, id);
+	else
+		err_mask = ata_do_dev_read_id(dev, &tf, id);
+
 	if (err_mask) {
 		if (err_mask & AC_ERR_NODEV_HINT) {
 			ata_dev_printk(dev, KERN_DEBUG,
@@ -2142,6 +2173,16 @@ int ata_dev_configure(struct ata_device *dev)
 		return 0;
 	}
 
+	if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
+	    dev->class == ATA_DEV_ATAPI) {
+		ata_dev_printk(dev, KERN_WARNING,
+			"WARNING: ATAPI is %s, device ignored.\n",
+			atapi_enabled ? "not supported with this driver"
+				      : "disabled");
+		ata_dev_disable(dev);
+		return 0;
+	}
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)
@@ -3247,7 +3288,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 		dev->dma_mode = ata_xfer_mask2mode(dma_mask);
 
 		found = 1;
-		if (dev->dma_mode != 0xff)
+		if (ata_dma_enabled(dev))
 			used_dma = 1;
 	}
 	if (!found)
@@ -3272,7 +3313,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 
 	/* step 3: set host DMA timings */
 	ata_link_for_each_dev(dev, link) {
-		if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
+		if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev))
 			continue;
 
 		dev->xfer_mode = dev->dma_mode;
@@ -5158,19 +5199,18 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
  */
 int sata_link_init_spd(struct ata_link *link)
 {
-	u32 scontrol;
 	u8 spd;
 	int rc;
 
-	rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+	rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
 	if (rc)
 		return rc;
 
-	spd = (scontrol >> 4) & 0xf;
+	spd = (link->saved_scontrol >> 4) & 0xf;
 	if (spd)
 		link->hw_sata_spd_limit &= (1 << spd) - 1;
 
-	ata_force_spd_limit(link);
+	ata_force_link_limits(link);
 
 	link->sata_spd_limit = link->hw_sata_spd_limit;
 
@@ -5753,9 +5793,10 @@ static void ata_port_detach(struct ata_port *ap)
 	ata_port_wait_eh(ap);
 
 	/* EH is now guaranteed to see UNLOADING - EH context belongs
-	 * to us.  Disable all existing devices.
+	 * to us.  Restore SControl and disable all existing devices.
 	 */
-	ata_port_for_each_link(link, ap) {
+	__ata_port_for_each_link(link, ap) {
+		sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
 		ata_link_for_each_dev(dev, link)
 			ata_dev_disable(dev);
 	}
@@ -5961,6 +6002,9 @@ static int __init ata_parse_force_one(char **cur,
 		{ "udma133",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
 		{ "udma/133",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
 		{ "udma7",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 7) },
+		{ "nohrst",	.lflags		= ATA_LFLAG_NO_HRST },
+		{ "nosrst",	.lflags		= ATA_LFLAG_NO_SRST },
+		{ "norst",	.lflags		= ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
 	};
 	char *start = *cur, *p = *cur;
 	char *id, *val, *endp;
@@ -6088,16 +6132,20 @@ static int __init ata_init(void)
 
 	ata_wq = create_workqueue("ata");
 	if (!ata_wq)
-		return -ENOMEM;
+		goto free_force_tbl;
 
 	ata_aux_wq = create_singlethread_workqueue("ata_aux");
-	if (!ata_aux_wq) {
-		destroy_workqueue(ata_wq);
-		return -ENOMEM;
-	}
+	if (!ata_aux_wq)
+		goto free_wq;
 
 	printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
 	return 0;
+
+free_wq:
+	destroy_workqueue(ata_wq);
+free_force_tbl:
+	kfree(ata_force_tbl);
+	return -ENOMEM;
 }
 
 static void __exit ata_exit(void)
@@ -6269,6 +6317,7 @@ EXPORT_SYMBOL_GPL(ata_host_resume);
 #endif /* CONFIG_PM */
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 58bdc538d22..c1db2f234d2 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2040,7 +2040,7 @@ static void ata_eh_link_report(struct ata_link *link)
 	}
 
 	if (ehc->i.serror)
-		ata_port_printk(ap, KERN_ERR,
+		ata_link_printk(link, KERN_ERR,
 		  "SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
 		  ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
 		  ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
@@ -2171,18 +2171,12 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
 }
 
 static int ata_eh_followup_srst_needed(struct ata_link *link,
-				       int rc, int classify,
-				       const unsigned int *classes)
+				       int rc, const unsigned int *classes)
 {
 	if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
 		return 0;
-	if (rc == -EAGAIN) {
-		if (classify)
-			return 1;
-		rc = 0;
-	}
-	if (rc != 0)
-		return 0;
+	if (rc == -EAGAIN)
+		return 1;
 	if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
 		return 1;
 	return 0;
@@ -2210,6 +2204,10 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	 */
 	while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX)
 		max_tries++;
+	if (link->flags & ATA_LFLAG_NO_HRST)
+		hardreset = NULL;
+	if (link->flags & ATA_LFLAG_NO_SRST)
+		softreset = NULL;
 
 	now = jiffies;
 	deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
@@ -2247,10 +2245,10 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ehc->i.action &= ~ATA_EH_RESET;
 	if (hardreset) {
 		reset = hardreset;
-		ehc->i.action = ATA_EH_HARDRESET;
+		ehc->i.action |= ATA_EH_HARDRESET;
 	} else if (softreset) {
 		reset = softreset;
-		ehc->i.action = ATA_EH_SOFTRESET;
+		ehc->i.action |= ATA_EH_SOFTRESET;
 	}
 
 	if (prereset) {
@@ -2305,9 +2303,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
 
 		rc = ata_do_reset(link, reset, classes, deadline);
+		if (rc && rc != -EAGAIN)
+			goto fail;
 
 		if (reset == hardreset &&
-		    ata_eh_followup_srst_needed(link, rc, classify, classes)) {
+		    ata_eh_followup_srst_needed(link, rc, classes)) {
 			/* okay, let's do follow-up softreset */
 			reset = softreset;
 
@@ -2322,10 +2322,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
 			rc = ata_do_reset(link, reset, classes, deadline);
 		}
-
-		/* -EAGAIN can happen if we skipped followup SRST */
-		if (rc && rc != -EAGAIN)
-			goto fail;
 	} else {
 		if (verbose)
 			ata_link_printk(link, KERN_INFO, "no reset method "
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f3b4b15a8dc..b9d3ba423cb 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2551,36 +2551,6 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
 }
 
 /**
- *	ata_scsi_dev_enabled - determine if device is enabled
- *	@dev: ATA device
- *
- *	Determine if commands should be sent to the specified device.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	0 if commands are not allowed / 1 if commands are allowed
- */
-
-static int ata_scsi_dev_enabled(struct ata_device *dev)
-{
-	if (unlikely(!ata_dev_enabled(dev)))
-		return 0;
-
-	if (!atapi_enabled || (dev->link->ap->flags & ATA_FLAG_NO_ATAPI)) {
-		if (unlikely(dev->class == ATA_DEV_ATAPI)) {
-			ata_dev_printk(dev, KERN_WARNING,
-				       "WARNING: ATAPI is %s, device ignored.\n",
-				       atapi_enabled ? "not supported with this driver" : "disabled");
-			return 0;
-		}
-	}
-
-	return 1;
-}
-
-/**
  *	ata_scsi_find_dev - lookup ata_device from scsi_cmnd
  *	@ap: ATA port to which the device is attached
  *	@scsidev: SCSI device from which we derive the ATA device
@@ -2601,7 +2571,7 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
 {
 	struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev);
 
-	if (unlikely(!dev || !ata_scsi_dev_enabled(dev)))
+	if (unlikely(!dev || !ata_dev_enabled(dev)))
 		return NULL;
 
 	return dev;
@@ -3622,7 +3592,7 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
 
 	ata_scsi_dump_cdb(ap, cmd);
 
-	if (likely(ata_scsi_dev_enabled(ap->link.device)))
+	if (likely(ata_dev_enabled(ap->link.device)))
 		rc = __ata_scsi_queuecmd(cmd, done, ap->link.device);
 	else {
 		cmd->result = (DID_BAD_TARGET << 16);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 304fdc6f1dc..2a4c516894f 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1315,11 +1315,6 @@ fsm_start:
 		break;
 
 	case HSM_ST_ERR:
-		/* make sure qc->err_mask is available to
-		 * know what's wrong and recover
-		 */
-		WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM)));
-
 		ap->hsm_task_state = HSM_ST_IDLE;
 
 		/* complete taskfile transaction */
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index f6f9c28ec7f..ade5c75b614 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -66,7 +66,6 @@ enum {
 
 extern unsigned int ata_print_id;
 extern struct workqueue_struct *ata_aux_wq;
-extern int atapi_enabled;
 extern int atapi_passthru16;
 extern int libata_fua;
 extern int libata_noacpi;
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index fbe60571155..eb919c16a03 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -181,7 +181,7 @@ static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
 
 	if (adev != acpi->last) {
 		pacpi_set_piomode(ap, adev);
-		if (adev->dma_mode)
+		if (ata_dma_enabled(adev))
 			pacpi_set_dmamode(ap, adev);
 		acpi->last = adev;
 	}
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 0f3e659db99..5ca70fa1f58 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -550,8 +550,9 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		pci_read_config_byte(isa_bridge, 0x5E, &tmp);
 		if ((tmp & 0x1E) == 0x12)
 	        	ppi[0] = &info_20_udma;
-		pci_dev_put(isa_bridge);
 	}
+	pci_dev_put(isa_bridge);
+
 	return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
 }
 
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 82fb6e27316..ab61095093b 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -24,8 +24,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/smc.h>
+#include <mach/board.h>
+#include <mach/smc.h>
 
 #define DRV_NAME "pata_at32"
 #define DRV_VERSION "0.0.3"
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index d7de7baf58a..e8a0d99d735 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -183,7 +183,7 @@ static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
 	u16 tmp16;
 
 	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
-	if (adev->dma_mode >= XFER_UDMA_0)
+	if (ata_using_udma(adev))
 		tmp16 |= (1 << dn);
 	else
 		tmp16 &= ~(1 << dn);
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 744beebaaf4..0c4b271a9d5 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -149,10 +149,10 @@ static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
 	struct ata_device *prev = ap->private_data;
 
 	/* See if the DMA settings could be wrong */
-	if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+	if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
 		/* Maybe, but do the channels match MWDMA/UDMA ? */
-		if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
-		    (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+		if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+		    (ata_using_udma(prev) && !ata_using_udma(adev)))
 		    	/* Switch the mode bits */
 		    	cs5530_set_dmamode(ap, adev);
 	}
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index e10816931b2..0221c9a4676 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.8"
+#define DRV_VERSION "0.4.0"
 
 struct it821x_dev
 {
@@ -425,6 +425,8 @@ static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
 		case ATA_CMD_WRITE_MULTI:
 		case ATA_CMD_WRITE_MULTI_EXT:
 		case ATA_CMD_ID_ATA:
+		case ATA_CMD_INIT_DEV_PARAMS:
+		case 0xFC:	/* Internal 'report rebuild state' */
 		/* Arguably should just no-op this one */
 		case ATA_CMD_SET_FEATURES:
 			return ata_sff_qc_issue(qc);
@@ -509,7 +511,7 @@ static void it821x_dev_config(struct ata_device *adev)
 
 	if (strstr(model_num, "Integrated Technology Express")) {
 		/* RAID mode */
-		printk(KERN_INFO "IT821x %sRAID%d volume",
+		ata_dev_printk(adev, KERN_INFO, "%sRAID%d volume",
 			adev->id[147]?"Bootable ":"",
 			adev->id[129]);
 		if (adev->id[129] != 1)
@@ -519,37 +521,51 @@ static void it821x_dev_config(struct ata_device *adev)
 	/* This is a controller firmware triggered funny, don't
 	   report the drive faulty! */
 	adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC;
+	/* No HPA in 'smart' mode */
+	adev->horkage |= ATA_HORKAGE_BROKEN_HPA;
 }
 
 /**
- *	it821x_ident_hack	-	Hack identify data up
- *	@ap: Port
+ *	it821x_read_id	-	Hack identify data up
+ *	@adev: device to read
+ *	@tf: proposed taskfile
+ *	@id: buffer for returned ident data
  *
- *	Walk the devices on this firmware driven port and slightly
+ *	Query the devices on this firmware driven port and slightly
  *	mash the identify data to stop us and common tools trying to
  *	use features not firmware supported. The firmware itself does
  *	some masking (eg SMART) but not enough.
- *
- *	This is a bit of an abuse of the cable method, but it is the
- *	only method called at the right time. We could modify the libata
- *	core specifically for ident hacking but while we have one offender
- *	it seems better to keep the fallout localised.
  */
 
-static int it821x_ident_hack(struct ata_port *ap)
+static unsigned int it821x_read_id(struct ata_device *adev,
+					struct ata_taskfile *tf, u16 *id)
 {
-	struct ata_device *adev;
-	ata_link_for_each_dev(adev, &ap->link) {
-		if (ata_dev_enabled(adev)) {
-			adev->id[84] &= ~(1 << 6);	/* No FUA */
-			adev->id[85] &= ~(1 << 10);	/* No HPA */
-			adev->id[76] = 0;		/* No NCQ/AN etc */
-		}
+	unsigned int err_mask;
+	unsigned char model_num[ATA_ID_PROD_LEN + 1];
+
+	err_mask = ata_do_dev_read_id(adev, tf, id);
+	if (err_mask)
+		return err_mask;
+	ata_id_c_string(id, model_num, ATA_ID_PROD, sizeof(model_num));
+
+	id[83] &= ~(1 << 12);	/* Cache flush is firmware handled */
+	id[83] &= ~(1 << 13);	/* Ditto for LBA48 flushes */
+	id[84] &= ~(1 << 6);	/* No FUA */
+	id[85] &= ~(1 << 10);	/* No HPA */
+	id[76] = 0;		/* No NCQ/AN etc */
+
+	if (strstr(model_num, "Integrated Technology Express")) {
+		/* Set feature bits the firmware neglects */
+		id[49] |= 0x0300;	/* LBA, DMA */
+		id[82] |= 0x0400;	/* LBA48 */
+		id[83] &= 0x7FFF;
+		id[83] |= 0x4000;	/* Word 83 is valid */
+		id[86] |= 0x0400;	/* LBA48 on */
+		id[ATA_ID_MAJOR_VER] |= 0x1F;
 	}
-	return ata_cable_unknown(ap);
+	return err_mask;
 }
 
-
 /**
  *	it821x_check_atapi_dma	-	ATAPI DMA handler
  *	@qc: Command we are about to issue
@@ -577,6 +593,136 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
 	return 0;
 }
 
+/**
+ *	it821x_display_disk	-	display disk setup
+ *	@n: Device number
+ *	@buf: Buffer block from firmware
+ *
+ *	Produce a nice informative display of the device setup as provided
+ *	by the firmware.
+ */
+
+static void it821x_display_disk(int n, u8 *buf)
+{
+	unsigned char id[41];
+	int mode = 0;
+	char *mtype = "";
+	char mbuf[8];
+	char *cbl = "(40 wire cable)";
+
+	static const char *types[5] = {
+		"RAID0", "RAID1" "RAID 0+1", "JBOD", "DISK"
+	};
+
+	if (buf[52] > 4)	/* No Disk */
+		return;
+
+	ata_id_c_string((u16 *)buf, id, 0, 41); 
+
+	if (buf[51]) {
+		mode = ffs(buf[51]);
+		mtype = "UDMA";
+	} else if (buf[49]) {
+		mode = ffs(buf[49]);
+		mtype = "MWDMA";
+	}
+
+	if (buf[76])
+		cbl = "";
+
+	if (mode)
+		snprintf(mbuf, 8, "%5s%d", mtype, mode - 1);
+	else
+		strcpy(mbuf, "PIO");
+	if (buf[52] == 4)
+		printk(KERN_INFO "%d: %-6s %-8s          %s %s\n",
+				n, mbuf, types[buf[52]], id, cbl);
+	else
+		printk(KERN_INFO "%d: %-6s %-8s Volume: %1d %s %s\n",
+				n, mbuf, types[buf[52]], buf[53], id, cbl);
+	if (buf[125] < 100)
+		printk(KERN_INFO "%d: Rebuilding: %d%%\n", n, buf[125]);
+}
+
+/**
+ *	it821x_firmware_command		-	issue firmware command
+ *	@ap: IT821x port to interrogate
+ *	@cmd: command
+ *	@len: length
+ *
+ *	Issue firmware commands expecting data back from the controller. We
+ *	use this to issue commands that do not go via the normal paths. Other
+ *	commands such as 0xFC can be issued normally.
+ */
+
+static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len)
+{
+	u8 status;
+	int n = 0;
+	u16 *buf = kmalloc(len, GFP_KERNEL);
+	if (buf == NULL) {
+		printk(KERN_ERR "it821x_firmware_command: Out of memory\n");
+		return NULL;
+	}
+	/* This isn't quite a normal ATA command as we are talking to the
+	   firmware not the drives */
+	ap->ctl |= ATA_NIEN;
+	iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+	ata_wait_idle(ap);
+	iowrite8(ATA_DEVICE_OBS, ap->ioaddr.device_addr);
+	iowrite8(cmd, ap->ioaddr.command_addr);
+	udelay(1);
+	/* This should be almost immediate but a little paranoia goes a long
+	   way. */
+	while(n++ < 10) {
+		status = ioread8(ap->ioaddr.status_addr);
+		if (status & ATA_ERR) {
+			kfree(buf);
+			printk(KERN_ERR "it821x_firmware_command: rejected\n");
+			return NULL;
+		}
+		if (status & ATA_DRQ) {
+			ioread16_rep(ap->ioaddr.data_addr, buf, len/2);
+			return (u8 *)buf;
+		}
+		mdelay(1);
+	}
+	kfree(buf);
+	printk(KERN_ERR "it821x_firmware_command: timeout\n");
+	return NULL;
+}
+
+/**
+ *	it821x_probe_firmware	-	firmware reporting/setup
+ *	@ap: IT821x port being probed
+ *
+ *	Probe the firmware of the controller by issuing firmware command
+ *	0xFA and analysing the returned data.
+ */
+
+static void it821x_probe_firmware(struct ata_port *ap)
+{
+	u8 *buf;
+	int i;
+
+	/* This is a bit ugly as we can't just issue a task file to a device
+	   as this is controller magic */
+
+	buf = it821x_firmware_command(ap, 0xFA, 512);
+
+	if (buf != NULL) {
+		printk(KERN_INFO "pata_it821x: Firmware %02X/%02X/%02X%02X\n",
+				buf[505],
+				buf[506],
+				buf[507],
+				buf[508]);
+		for (i = 0; i < 4; i++)
+ 			it821x_display_disk(i, buf + 128 * i);
+		kfree(buf);
+	}
+}
+
+
 
 /**
  *	it821x_port_start	-	port setup
@@ -610,6 +756,8 @@ static int it821x_port_start(struct ata_port *ap)
 		/* Long I/O's although allowed in LBA48 space cause the
 		   onboard firmware to enter the twighlight zone */
 		/* No ATAPI DMA in this mode either */
+		if (ap->port_no == 0)
+			it821x_probe_firmware(ap);
 	}
 	/* Pull the current clocks from 0x50 */
 	if (conf & (1 << (1 + ap->port_no)))
@@ -631,6 +779,25 @@ static int it821x_port_start(struct ata_port *ap)
 	return 0;
 }
 
+/**
+ *	it821x_rdc_cable	-	Cable detect for RDC1010
+ *	@ap: port we are checking
+ *
+ *	Return the RDC1010 cable type. Unlike the IT821x we know how to do
+ *	this and can do host side cable detect
+ */
+
+static int it821x_rdc_cable(struct ata_port *ap)
+{
+	u16 r40;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	pci_read_config_word(pdev, 0x40, &r40);
+	if (r40 & (1 << (2 + ap->port_no)))
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
 static struct scsi_host_template it821x_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -641,9 +808,10 @@ static struct ata_port_operations it821x_smart_port_ops = {
 	.check_atapi_dma= it821x_check_atapi_dma,
 	.qc_issue	= it821x_smart_qc_issue,
 
-	.cable_detect	= it821x_ident_hack,
+	.cable_detect	= ata_cable_80wire,
 	.set_mode	= it821x_smart_set_mode,
 	.dev_config	= it821x_dev_config,
+	.read_id	= it821x_read_id,
 
 	.port_start	= it821x_port_start,
 };
@@ -664,8 +832,29 @@ static struct ata_port_operations it821x_passthru_port_ops = {
 	.port_start	= it821x_port_start,
 };
 
+static struct ata_port_operations it821x_rdc_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+
+	.check_atapi_dma= it821x_check_atapi_dma,
+	.sff_dev_select	= it821x_passthru_dev_select,
+	.bmdma_start 	= it821x_passthru_bmdma_start,
+	.bmdma_stop	= it821x_passthru_bmdma_stop,
+	.qc_issue	= it821x_passthru_qc_issue,
+
+	.cable_detect	= it821x_rdc_cable,
+	.set_piomode	= it821x_passthru_set_piomode,
+	.set_dmamode	= it821x_passthru_set_dmamode,
+
+	.port_start	= it821x_port_start,
+};
+
 static void it821x_disable_raid(struct pci_dev *pdev)
 {
+	/* Neither the RDC nor the IT8211 */
+	if (pdev->vendor != PCI_VENDOR_ID_ITE ||
+			pdev->device != PCI_DEVICE_ID_ITE_8212)
+			return;
+
 	/* Reset local CPU, and set BIOS not ready */
 	pci_write_config_byte(pdev, 0x5E, 0x01);
 
@@ -690,6 +879,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
+		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_smart_port_ops
 	};
 	static const struct ata_port_info info_passthru = {
@@ -699,6 +889,13 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_passthru_port_ops
 	};
+	static const struct ata_port_info info_rdc = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		/* No UDMA */
+		.port_ops = &it821x_rdc_port_ops
+	};
 
 	const struct ata_port_info *ppi[] = { NULL, NULL };
 	static char *mode[2] = { "pass through", "smart" };
@@ -707,21 +904,25 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
+		
+	if (pdev->vendor == PCI_VENDOR_ID_RDC) {
+		ppi[0] = &info_rdc;
+	} else {
+		/* Force the card into bypass mode if so requested */
+		if (it8212_noraid) {
+			printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
+			it821x_disable_raid(pdev);
+		}
+		pci_read_config_byte(pdev, 0x50, &conf);
+		conf &= 1;
 
-	/* Force the card into bypass mode if so requested */
-	if (it8212_noraid) {
-		printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
-		it821x_disable_raid(pdev);
+		printk(KERN_INFO DRV_NAME": controller in %s mode.\n",
+								mode[conf]);
+		if (conf == 0)
+			ppi[0] = &info_passthru;
+		else
+			ppi[0] = &info_smart;
 	}
-	pci_read_config_byte(pdev, 0x50, &conf);
-	conf &= 1;
-
-	printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]);
-	if (conf == 0)
-		ppi[0] = &info_passthru;
-	else
-		ppi[0] = &info_smart;
-
 	return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
 }
 
@@ -745,6 +946,7 @@ static int it821x_reinit_one(struct pci_dev *pdev)
 static const struct pci_device_id it821x[] = {
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), },
+	{ PCI_VDEVICE(RDC, 0x1010), },
 
 	{ },
 };
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 24a011b2502..0d87eec8496 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -20,29 +20,30 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_marvell"
-#define DRV_VERSION	"0.1.4"
+#define DRV_VERSION	"0.1.6"
 
 /**
- *	marvell_pre_reset	-	check for 40/80 pin
- *	@link: link
- *	@deadline: deadline jiffies for the operation
+ *	marvell_pata_active	-	check if PATA is active
+ *	@pdev: PCI device
  *
- *	Perform the PATA port setup we need.
+ *	Returns 1 if the PATA port may be active. We know how to check this
+ *	for the 6145 but not the other devices
  */
 
-static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+static int marvell_pata_active(struct pci_dev *pdev)
 {
-	struct ata_port *ap = link->ap;
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int i;
 	u32 devices;
 	void __iomem *barp;
-	int i;
 
-	/* Check if our port is enabled */
+	/* We don't yet know how to do this for other devices */
+	if (pdev->device != 0x6145)
+		return 1;	
 
 	barp = pci_iomap(pdev, 5, 0x10);
 	if (barp == NULL)
 		return -ENOMEM;
+
 	printk("BAR5:");
 	for(i = 0; i <= 0x0F; i++)
 		printk("%02X:%02X ", i, ioread8(barp + i));
@@ -51,9 +52,27 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
 	devices = ioread32(barp + 0x0C);
 	pci_iounmap(pdev, barp);
 
-	if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
-	    (!(devices & 0x10)))	/* PATA enable ? */
-		return -ENOENT;
+	if (devices & 0x10)
+		return 1;
+	return 0;
+}
+
+/**
+ *	marvell_pre_reset	-	check for 40/80 pin
+ *	@link: link
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (pdev->device == 0x6145 && ap->port_no == 0 &&
+		!marvell_pata_active(pdev))	/* PATA enable ? */
+			return -ENOENT;
 
 	return ata_sff_prereset(link, deadline);
 }
@@ -128,6 +147,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	if (pdev->device == 0x6101)
 		ppi[1] = &ata_dummy_port_info;
 
+#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+	if (!marvell_pata_active(pdev)) {
+		printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
+		return -ENODEV;
+	}
+#endif
 	return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
 }
 
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index e678af383d1..df64f244300 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -198,7 +198,7 @@ static unsigned int oldpiix_qc_issue(struct ata_queued_cmd *qc)
 
 	if (adev != ap->private_data) {
 		oldpiix_set_piomode(ap, adev);
-		if (adev->dma_mode)
+		if (ata_dma_enabled(adev))
 			oldpiix_set_dmamode(ap, adev);
 	}
 	return ata_sff_qc_issue(qc);
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index cbab397e3db..0278fd2b8fb 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -167,10 +167,10 @@ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
 	struct ata_device *prev = ap->private_data;
 
 	/* See if the DMA settings could be wrong */
-	if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+	if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
 		/* Maybe, but do the channels match MWDMA/UDMA ? */
-		if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
-		    (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+		if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+		    (ata_using_udma(prev) && !ata_using_udma(adev)))
 		    	/* Switch the mode bits */
 		    	sc1200_set_dmamode(ap, adev);
 	}
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 720b8645f58..e970b227fbc 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -322,9 +322,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 	/* Try to acquire MMIO resources and fallback to PIO if
 	 * that fails
 	 */
-	rc = pcim_enable_device(pdev);
-	if (rc)
-		return rc;
 	rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
 	if (rc)
 		goto use_ioports;
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 708ed144ede..8fdb2ce7321 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -98,7 +98,8 @@ static const struct via_isa_bridge {
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
-	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 |
+	VIA_BAD_AST | VIA_SATA_PATA },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@@ -322,6 +323,29 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]);
 }
 
+/**
+ *	via_tf_load - send taskfile registers to host controller
+ *	@ap: Port to which output is sent
+ *	@tf: ATA taskfile register set
+ *
+ *	Outputs ATA taskfile to standard ATA host controller.
+ *
+ *	Note: This is to fix the internal bug of via chipsets, which
+ *	will reset the device register after changing the IEN bit on
+ *	ctl register
+ */
+static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+	struct ata_taskfile tmp_tf;
+
+	if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
+		tmp_tf = *tf;
+		tmp_tf.flags |= ATA_TFLAG_DEVICE;
+		tf = &tmp_tf;
+	}
+	ata_sff_tf_load(ap, tf);
+}
+
 static struct scsi_host_template via_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -332,6 +356,7 @@ static struct ata_port_operations via_port_ops = {
 	.set_piomode	= via_set_piomode,
 	.set_dmamode	= via_set_dmamode,
 	.prereset	= via_pre_reset,
+	.sff_tf_load	= via_tf_load,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 3ead02fe379..5032c32fa50 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -96,6 +96,7 @@ enum {
 	PORT_SCR		= 0x20,
 
 	/* HOST_CTL bits */
+	HCTL_LEDEN		= (1 << 3),  /* enable LED operation */
 	HCTL_IRQOFF		= (1 << 8),  /* global IRQ off */
 	HCTL_FTHD0		= (1 << 10), /* fifo threshold 0 */
 	HCTL_FTHD1		= (1 << 11), /* fifo threshold 1*/
@@ -540,7 +541,7 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
 	void __iomem *port_base = inic_port_base(ap);
 
 	/* fire up the ADMA engine */
-	writew(HCTL_FTHD0, port_base + HOST_CTL);
+	writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
 	writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
 	writeb(0, port_base + PORT_CPB_PTQFIFO);
 
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index ad169ffbc4c..c815f8ecf6e 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -667,7 +667,8 @@ static const struct pci_device_id mv_pci_tbl[] = {
 	{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
 	{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
 	{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
-	/* RocketRAID 1740/174x have different identifiers */
+	/* RocketRAID 1720/174x have different identifiers */
+	{ PCI_VDEVICE(TTI, 0x1720), chip_6042 },
 	{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
 	{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
 
@@ -1134,30 +1135,16 @@ static int mv_qc_defer(struct ata_queued_cmd *qc)
 	if (ap->nr_active_links == 0)
 		return 0;
 
-	if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
-		/*
-		 * The port is operating in host queuing mode (EDMA).
-		 * It can accomodate a new qc if the qc protocol
-		 * is compatible with the current host queue mode.
-		 */
-		if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
-			/*
-			 * The host queue (EDMA) is in NCQ mode.
-			 * If the new qc is also an NCQ command,
-			 * then allow the new qc.
-			 */
-			if (qc->tf.protocol == ATA_PROT_NCQ)
-				return 0;
-		} else {
-			/*
-			 * The host queue (EDMA) is in non-NCQ, DMA mode.
-			 * If the new qc is also a non-NCQ, DMA command,
-			 * then allow the new qc.
-			 */
-			if (qc->tf.protocol == ATA_PROT_DMA)
-				return 0;
-		}
-	}
+	/*
+	 * The port is operating in host queuing mode (EDMA) with NCQ
+	 * enabled, allow multiple NCQ commands.  EDMA also allows
+	 * queueing multiple DMA commands but libata core currently
+	 * doesn't allow it.
+	 */
+	if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
+	    (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
+		return 0;
+
 	return ATA_DEFER_PORT;
 }
 
@@ -3036,7 +3023,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 		break;
 	case chip_soc:
 		hpriv->ops = &mv_soc_ops;
-		hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
+		hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
+			MV_HP_ERRATA_60X1C0;
 		break;
 
 	default:
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 858f70610ed..1e1f3f3757a 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -309,8 +309,6 @@ static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-			unsigned long deadline);
 static int nv_adma_slave_config(struct scsi_device *sdev);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -407,7 +405,7 @@ static struct scsi_host_template nv_swncq_sht = {
 
 static struct ata_port_operations nv_generic_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.hardreset		= nv_hardreset,
+	.hardreset		= ATA_OP_NULL,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
 };
@@ -1588,21 +1586,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
 	ata_sff_thaw(ap);
 }
 
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-			unsigned long deadline)
-{
-	int rc;
-
-	/* SATA hardreset fails to retrieve proper device signature on
-	 * some controllers.  Request follow up SRST.  For more info,
-	 * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
-	 */
-	rc = sata_sff_hardreset(link, class, deadline);
-	if (rc)
-		return rc;
-	return -EAGAIN;
-}
-
 static void nv_adma_error_handler(struct ata_port *ap)
 {
 	struct nv_adma_port_priv *pp = ap->private_data;
diff --git a/drivers/atm/adummy.c b/drivers/atm/adummy.c
index 2ebd07f2ef8..5effec6f545 100644
--- a/drivers/atm/adummy.c
+++ b/drivers/atm/adummy.c
@@ -3,7 +3,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/skbuff.h>
 #include <linux/errno.h>
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 24df73ad326..088885ed51b 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -156,8 +156,8 @@ static void ia_hack_tcq(IADEV *dev) {
         }
         iavcc_r->vc_desc_cnt--;
         dev->desc_tbl[desc1 -1].timestamp = 0;
-        IF_EVENT(printk("ia_hack: return_q skb = 0x%x desc = %d\n", 
-                                   (u32)dev->desc_tbl[desc1 -1].txskb, desc1);)
+        IF_EVENT(printk("ia_hack: return_q skb = 0x%p desc = %d\n",
+                                   dev->desc_tbl[desc1 -1].txskb, desc1);)
         if (iavcc_r->pcr < dev->rate_limit) {
            IA_SKB_STATE (dev->desc_tbl[desc1-1].txskb) |= IA_TX_DONE;
            if (ia_enque_rtn_q(&dev->tx_return_q, dev->desc_tbl[desc1 -1]) < 0)
@@ -527,8 +527,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
       inc = 0;
       testSlot = idealSlot;
       TstSchedTbl = (u16*)(SchedTbl+testSlot);  //set index and read in value
-      IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%x, NumToAssign=%d\n",
-                                testSlot, (u32)TstSchedTbl,toBeAssigned);) 
+      IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%p, NumToAssign=%d\n",
+                                testSlot, TstSchedTbl,toBeAssigned);)
       memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
       while (cbrVC)  // If another VC at this location, we have to keep looking
       {
@@ -536,8 +536,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
           testSlot = idealSlot - inc;
           if (testSlot < 0) { // Wrap if necessary
              testSlot += dev->CbrTotEntries;
-             IF_CBR(printk("Testslot Wrap. STable Start=0x%x,Testslot=%d\n",
-                                                       (u32)SchedTbl,testSlot);)
+             IF_CBR(printk("Testslot Wrap. STable Start=0x%p,Testslot=%d\n",
+                                                       SchedTbl,testSlot);)
           }
           TstSchedTbl = (u16 *)(SchedTbl + testSlot);  // set table index
           memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC)); 
@@ -552,8 +552,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
           } 
           // set table index and read in value
           TstSchedTbl = (u16*)(SchedTbl + testSlot);
-          IF_CBR(printk("Reading CBR Tbl from 0x%x, CbrVal=0x%x Iteration %d\n",
-                          (u32)TstSchedTbl,cbrVC,inc);) 
+          IF_CBR(printk("Reading CBR Tbl from 0x%p, CbrVal=0x%x Iteration %d\n",
+                          TstSchedTbl,cbrVC,inc);)
           memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
        } /* while */
        // Move this VCI number into this location of the CBR Sched table.
@@ -1427,11 +1427,11 @@ static int rx_init(struct atm_dev *dev)
 	/* We know this is 32bit bus addressed so the following is safe */
 	writel(iadev->rx_dle_dma & 0xfffff000,
 	       iadev->dma + IPHASE5575_RX_LIST_ADDR);  
-	IF_INIT(printk("Tx Dle list addr: 0x%08x value: 0x%0x\n", 
-                      (u32)(iadev->dma+IPHASE5575_TX_LIST_ADDR), 
+	IF_INIT(printk("Tx Dle list addr: 0x%p value: 0x%0x\n",
+                      iadev->dma+IPHASE5575_TX_LIST_ADDR,
                       *(u32*)(iadev->dma+IPHASE5575_TX_LIST_ADDR));  
-	printk("Rx Dle list addr: 0x%08x value: 0x%0x\n", 
-                      (u32)(iadev->dma+IPHASE5575_RX_LIST_ADDR), 
+	printk("Rx Dle list addr: 0x%p value: 0x%0x\n",
+                      iadev->dma+IPHASE5575_RX_LIST_ADDR,
                       *(u32*)(iadev->dma+IPHASE5575_RX_LIST_ADDR));)  
   
 	writew(0xffff, iadev->reass_reg+REASS_MASK_REG);  
@@ -1470,7 +1470,7 @@ static int rx_init(struct atm_dev *dev)
 		buf_desc_ptr++;		  
 		rx_pkt_start += iadev->rx_buf_sz;  
 	}  
-	IF_INIT(printk("Rx Buffer desc ptr: 0x%0x\n", (u32)(buf_desc_ptr));)  
+	IF_INIT(printk("Rx Buffer desc ptr: 0x%p\n", buf_desc_ptr);)
         i = FREE_BUF_DESC_Q*iadev->memSize; 
 	writew(i >> 16,  iadev->reass_reg+REASS_QUEUE_BASE); 
         writew(i, iadev->reass_reg+FREEQ_ST_ADR);
@@ -1487,7 +1487,7 @@ static int rx_init(struct atm_dev *dev)
 		*freeq_start = (u_short)i;  
 		freeq_start++;  
 	}  
-	IF_INIT(printk("freeq_start: 0x%0x\n", (u32)freeq_start);)  
+	IF_INIT(printk("freeq_start: 0x%p\n", freeq_start);)
         /* Packet Complete Queue */
         i = (PKT_COMP_Q * iadev->memSize) & 0xffff;
         writew(i, iadev->reass_reg+PCQ_ST_ADR);
@@ -1713,7 +1713,7 @@ static void tx_dle_intr(struct atm_dev *dev)
                IA_SKB_STATE(skb) |= IA_DLED;
                skb_queue_tail(&iavcc->txing_skb, skb);
             }
-            IF_EVENT(printk("tx_dle_intr: enque skb = 0x%x \n", (u32)skb);)
+            IF_EVENT(printk("tx_dle_intr: enque skb = 0x%p \n", skb);)
             if (++dle == iadev->tx_dle_q.end)
                  dle = iadev->tx_dle_q.start;
         }
@@ -2044,8 +2044,8 @@ static int tx_init(struct atm_dev *dev)
         writew(tmp16, iadev->seg_reg+CBR_TAB_END+1); // CBR_PTR;
         tmp16 = (CBR_SCHED_TABLE*iadev->memSize + iadev->num_vc*6 - 2) >> 1;
         writew(tmp16, iadev->seg_reg+CBR_TAB_END);
-        IF_INIT(printk("iadev->seg_reg = 0x%x CBR_PTR_BASE = 0x%x\n",
-               (u32)iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));)
+        IF_INIT(printk("iadev->seg_reg = 0x%p CBR_PTR_BASE = 0x%x\n",
+               iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));)
         IF_INIT(printk("CBR_TAB_BEG = 0x%x, CBR_TAB_END = 0x%x, CBR_PTR = 0x%x\n",
           readw(iadev->seg_reg+CBR_TAB_BEG), readw(iadev->seg_reg+CBR_TAB_END),
           readw(iadev->seg_reg+CBR_TAB_END+1));)
@@ -2963,8 +2963,8 @@ static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb) {
  
 	/* Put the packet in a tx buffer */   
 	trailer = iadev->tx_buf[desc-1].cpcs;
-        IF_TX(printk("Sent: skb = 0x%x skb->data: 0x%x len: %d, desc: %d\n",
-                  (u32)skb, (u32)skb->data, skb->len, desc);)
+        IF_TX(printk("Sent: skb = 0x%p skb->data: 0x%p len: %d, desc: %d\n",
+                  skb, skb->data, skb->len, desc);)
 	trailer->control = 0; 
         /*big endian*/ 
 	trailer->length = ((skb->len & 0xff) << 8) | ((skb->len & 0xff00) >> 8);
@@ -3181,7 +3181,7 @@ static int __devinit ia_init_one(struct pci_dev *pdev,
 	}
 	dev->dev_data = iadev;
 	IF_INIT(printk(DEV_LABEL "registered at (itf :%d)\n", dev->number);)
-	IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev,
+	IF_INIT(printk("dev_id = 0x%p iadev->LineRate = %d \n", dev,
 		iadev->LineRate);)
 
 	pci_set_drvdata(pdev, dev);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 839d27cecb3..cc5e28c8885 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -198,6 +198,7 @@ static void class_create_release(struct class *cls)
  * class_create - create a struct class structure
  * @owner: pointer to the module that is to "own" this struct class
  * @name: pointer to a string for the name of this class.
+ * @key: the lock_class_key for this class; used by mutex lock debugging
  *
  * This is used to create a struct class pointer that can then be used
  * in calls to device_create().
@@ -294,6 +295,12 @@ int class_for_each_device(struct class *class, struct device *start,
 
 	if (!class)
 		return -EINVAL;
+	if (!class->p) {
+		WARN(1, "%s called for class '%s' before it was initialized",
+		     __func__, class->name);
+		return -EINVAL;
+	}
+
 	mutex_lock(&class->p->class_mutex);
 	list_for_each_entry(dev, &class->p->class_devices, node) {
 		if (start) {
@@ -343,6 +350,11 @@ struct device *class_find_device(struct class *class, struct device *start,
 
 	if (!class)
 		return NULL;
+	if (!class->p) {
+		WARN(1, "%s called for class '%s' before it was initialized",
+		     __func__, class->name);
+		return NULL;
+	}
 
 	mutex_lock(&class->p->class_mutex);
 	list_for_each_entry(dev, &class->p->class_devices, node) {
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 068aa1c9538..d021c98605b 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -53,7 +53,7 @@ static inline int device_is_not_partition(struct device *dev)
  * it is attached to.  If it is not attached to a bus either, an empty
  * string will be returned.
  */
-const char *dev_driver_string(struct device *dev)
+const char *dev_driver_string(const struct device *dev)
 {
 	return dev->driver ? dev->driver->name :
 			(dev->bus ? dev->bus->name :
@@ -541,6 +541,7 @@ void device_initialize(struct device *dev)
 	spin_lock_init(&dev->devres_lock);
 	INIT_LIST_HEAD(&dev->devres_head);
 	device_init_wakeup(dev, 0);
+	device_pm_init(dev);
 	set_dev_node(dev, -1);
 }
 
@@ -843,13 +844,19 @@ int device_add(struct device *dev)
 {
 	struct device *parent = NULL;
 	struct class_interface *class_intf;
-	int error;
+	int error = -EINVAL;
 
 	dev = get_device(dev);
-	if (!dev || !strlen(dev->bus_id)) {
-		error = -EINVAL;
-		goto Done;
-	}
+	if (!dev)
+		goto done;
+
+	/* Temporarily support init_name if it is set.
+	 * It will override bus_id for now */
+	if (dev->init_name)
+		dev_set_name(dev, "%s", dev->init_name);
+
+	if (!strlen(dev->bus_id))
+		goto done;
 
 	pr_debug("device: '%s': %s\n", dev->bus_id, __func__);
 
@@ -897,9 +904,10 @@ int device_add(struct device *dev)
 	error = bus_add_device(dev);
 	if (error)
 		goto BusError;
-	error = device_pm_add(dev);
+	error = dpm_sysfs_add(dev);
 	if (error)
-		goto PMError;
+		goto DPMError;
+	device_pm_add(dev);
 	kobject_uevent(&dev->kobj, KOBJ_ADD);
 	bus_attach_device(dev);
 	if (parent)
@@ -917,10 +925,10 @@ int device_add(struct device *dev)
 				class_intf->add_dev(dev, class_intf);
 		mutex_unlock(&dev->class->p->class_mutex);
 	}
- Done:
+done:
 	put_device(dev);
 	return error;
- PMError:
+ DPMError:
 	bus_remove_device(dev);
  BusError:
 	if (dev->bus)
@@ -944,7 +952,7 @@ int device_add(struct device *dev)
 	cleanup_device_parent(dev);
 	if (parent)
 		put_device(parent);
-	goto Done;
+	goto done;
 }
 
 /**
@@ -1007,6 +1015,7 @@ void device_del(struct device *dev)
 	struct class_interface *class_intf;
 
 	device_pm_remove(dev);
+	dpm_sysfs_remove(dev);
 	if (parent)
 		klist_del(&dev->knode_parent);
 	if (MAJOR(dev->devt)) {
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 2ef5acf4368..1e2bda780e4 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -16,9 +16,6 @@
 #include <linux/string.h>
 #include "base.h"
 
-#define to_dev(node) container_of(node, struct device, driver_list)
-
-
 static struct device *next_device(struct klist_iter *i)
 {
 	struct klist_node *n = klist_next(i);
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 3250c5257b7..273a944d404 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -67,20 +67,16 @@ void device_pm_unlock(void)
  *	device_pm_add - add a device to the list of active devices
  *	@dev:	Device to be added to the list
  */
-int device_pm_add(struct device *dev)
+void device_pm_add(struct device *dev)
 {
-	int error;
-
 	pr_debug("PM: Adding info for %s:%s\n",
 		 dev->bus ? dev->bus->name : "No Bus",
 		 kobject_name(&dev->kobj));
 	mutex_lock(&dpm_list_mtx);
 	if (dev->parent) {
-		if (dev->parent->power.status >= DPM_SUSPENDING) {
-			dev_warn(dev, "parent %s is sleeping, will not add\n",
+		if (dev->parent->power.status >= DPM_SUSPENDING)
+			dev_warn(dev, "parent %s should not be sleeping\n",
 				dev->parent->bus_id);
-			WARN_ON(true);
-		}
 	} else if (transition_started) {
 		/*
 		 * We refuse to register parentless devices while a PM
@@ -89,13 +85,9 @@ int device_pm_add(struct device *dev)
 		 */
 		WARN_ON(true);
 	}
-	error = dpm_sysfs_add(dev);
-	if (!error) {
-		dev->power.status = DPM_ON;
-		list_add_tail(&dev->power.entry, &dpm_list);
-	}
+
+	list_add_tail(&dev->power.entry, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
-	return error;
 }
 
 /**
@@ -110,7 +102,6 @@ void device_pm_remove(struct device *dev)
 		 dev->bus ? dev->bus->name : "No Bus",
 		 kobject_name(&dev->kobj));
 	mutex_lock(&dpm_list_mtx);
-	dpm_sysfs_remove(dev);
 	list_del_init(&dev->power.entry);
 	mutex_unlock(&dpm_list_mtx);
 }
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index a3252c0e288..41f51fae042 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -1,3 +1,8 @@
+static inline void device_pm_init(struct device *dev)
+{
+	dev->power.status = DPM_ON;
+}
+
 #ifdef CONFIG_PM_SLEEP
 
 /*
@@ -11,12 +16,12 @@ static inline struct device *to_device(struct list_head *entry)
 	return container_of(entry, struct device, power.entry);
 }
 
-extern int device_pm_add(struct device *);
+extern void device_pm_add(struct device *);
 extern void device_pm_remove(struct device *);
 
 #else /* CONFIG_PM_SLEEP */
 
-static inline int device_pm_add(struct device *dev) { return 0; }
+static inline void device_pm_add(struct device *dev) {}
 static inline void device_pm_remove(struct device *dev) {}
 
 #endif
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index d625169c8e4..0c81ca73128 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -30,7 +30,7 @@ enum {
 
 static char aoe_iflist[IFLISTSZ];
 module_param_string(aoe_iflist, aoe_iflist, IFLISTSZ, 0600);
-MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\"\n");
+MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\"");
 
 #ifndef MODULE
 static int __init aoe_iflist_setup(char *str)
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 24b97b0bef9..d070d492e38 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -571,8 +571,8 @@ out_free:
 		list_del(&brd->brd_list);
 		brd_free(brd);
 	}
+	unregister_blkdev(RAMDISK_MAJOR, "ramdisk");
 
-	unregister_blkdev(RAMDISK_MAJOR, "brd");
 	return -ENOMEM;
 }
 
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index d81632cd7d0..b73116ef923 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -159,7 +159,7 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
 static int cciss_revalidate(struct gendisk *disk);
-static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
+static int rebuild_lun_table(ctlr_info_t *h, int first_time);
 static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
 			   int clear_all);
 
@@ -171,7 +171,6 @@ static void cciss_geometry_inquiry(int ctlr, int logvol,
 			int withirq, sector_t total_size,
 			unsigned int block_size, InquiryData_struct *inq_buff,
 				   drive_info_struct *drv);
-static void cciss_getgeometry(int cntl_num);
 static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
 					   __u32);
 static void start_io(ctlr_info_t *h);
@@ -929,8 +928,10 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 			return 0;
 		}
 
+	case CCISS_DEREGDISK:
+	case CCISS_REGNEWD:
 	case CCISS_REVALIDVOLS:
-		return rebuild_lun_table(host, NULL);
+		return rebuild_lun_table(host, 0);
 
 	case CCISS_GETLUNINFO:{
 			LogvolInfo_struct luninfo;
@@ -943,12 +944,6 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 				return -EFAULT;
 			return 0;
 		}
-	case CCISS_DEREGDISK:
-		return rebuild_lun_table(host, disk);
-
-	case CCISS_REGNEWD:
-		return rebuild_lun_table(host, NULL);
-
 	case CCISS_PASSTHRU:
 		{
 			IOCTL_Command_struct iocommand;
@@ -1134,7 +1129,7 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 				if (ioc->Request.Type.Direction == XFER_WRITE) {
 					if (copy_from_user
 					    (buff[sg_used], data_ptr, sz)) {
-						status = -ENOMEM;
+						status = -EFAULT;
 						goto cleanup1;
 					}
 				} else {
@@ -1292,8 +1287,6 @@ static void cciss_check_queues(ctlr_info_t *h)
 				h->next_to_run = curr_queue;
 				break;
 			}
-		} else {
-			curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
 		}
 	}
 }
@@ -1332,15 +1325,84 @@ static void cciss_softirq_done(struct request *rq)
 	spin_unlock_irqrestore(&h->lock, flags);
 }
 
+/* This function gets the serial number of a logical drive via
+ * inquiry page 0x83.  Serial no. is 16 bytes.  If the serial
+ * number cannot be had, for whatever reason, 16 bytes of 0xff
+ * are returned instead.
+ */
+static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
+				unsigned char *serial_no, int buflen)
+{
+#define PAGE_83_INQ_BYTES 64
+	int rc;
+	unsigned char *buf;
+
+	if (buflen > 16)
+		buflen = 16;
+	memset(serial_no, 0xff, buflen);
+	buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL);
+	if (!buf)
+		return;
+	memset(serial_no, 0, buflen);
+	if (withirq)
+		rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
+			PAGE_83_INQ_BYTES, 1, logvol, 0x83, TYPE_CMD);
+	else
+		rc = sendcmd(CISS_INQUIRY, ctlr, buf,
+			PAGE_83_INQ_BYTES, 1, logvol, 0x83, NULL, TYPE_CMD);
+	if (rc == IO_OK)
+		memcpy(serial_no, &buf[8], buflen);
+	kfree(buf);
+	return;
+}
+
+static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
+				int drv_index)
+{
+	disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+	sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index);
+	disk->major = h->major;
+	disk->first_minor = drv_index << NWD_SHIFT;
+	disk->fops = &cciss_fops;
+	disk->private_data = &h->drv[drv_index];
+
+	/* Set up queue information */
+	blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
+
+	/* This is a hardware imposed limit. */
+	blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
+
+	/* This is a limit in the driver and could be eliminated. */
+	blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
+
+	blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
+
+	blk_queue_softirq_done(disk->queue, cciss_softirq_done);
+
+	disk->queue->queuedata = h;
+
+	blk_queue_hardsect_size(disk->queue,
+				h->drv[drv_index].block_size);
+
+	/* Make sure all queue data is written out before */
+	/* setting h->drv[drv_index].queue, as setting this */
+	/* allows the interrupt handler to start the queue */
+	wmb();
+	h->drv[drv_index].queue = disk->queue;
+	add_disk(disk);
+}
+
 /* This function will check the usage_count of the drive to be updated/added.
- * If the usage_count is zero then the drive information will be updated and
- * the disk will be re-registered with the kernel.  If not then it will be
- * left alone for the next reboot.  The exception to this is disk 0 which
- * will always be left registered with the kernel since it is also the
- * controller node.  Any changes to disk 0 will show up on the next
- * reboot.
+ * If the usage_count is zero and it is a heretofore unknown drive, or,
+ * the drive's capacity, geometry, or serial number has changed,
+ * then the drive information will be updated and the disk will be
+ * re-registered with the kernel.  If these conditions don't hold,
+ * then it will be left alone for the next reboot.  The exception to this
+ * is disk 0 which will always be left registered with the kernel since it
+ * is also the controller node.  Any changes to disk 0 will show up on
+ * the next reboot.
  */
-static void cciss_update_drive_info(int ctlr, int drv_index)
+static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
 {
 	ctlr_info_t *h = hba[ctlr];
 	struct gendisk *disk;
@@ -1349,16 +1411,81 @@ static void cciss_update_drive_info(int ctlr, int drv_index)
 	sector_t total_size;
 	unsigned long flags = 0;
 	int ret = 0;
+	drive_info_struct *drvinfo;
+	int was_only_controller_node;
+
+	/* Get information about the disk and modify the driver structure */
+	inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+	drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL);
+	if (inq_buff == NULL || drvinfo == NULL)
+		goto mem_msg;
+
+	/* See if we're trying to update the "controller node"
+	 * this will happen the when the first logical drive gets
+	 * created by ACU.
+	 */
+	was_only_controller_node = (drv_index == 0 &&
+				h->drv[0].raid_level == -1);
 
-	/* if the disk already exists then deregister it before proceeding */
-	if (h->drv[drv_index].raid_level != -1) {
+	/* testing to see if 16-byte CDBs are already being used */
+	if (h->cciss_read == CCISS_READ_16) {
+		cciss_read_capacity_16(h->ctlr, drv_index, 1,
+			&total_size, &block_size);
+
+	} else {
+		cciss_read_capacity(ctlr, drv_index, 1,
+				    &total_size, &block_size);
+
+		/* if read_capacity returns all F's this volume is >2TB */
+		/* in size so we switch to 16-byte CDB's for all */
+		/* read/write ops */
+		if (total_size == 0xFFFFFFFFULL) {
+			cciss_read_capacity_16(ctlr, drv_index, 1,
+			&total_size, &block_size);
+			h->cciss_read = CCISS_READ_16;
+			h->cciss_write = CCISS_WRITE_16;
+		} else {
+			h->cciss_read = CCISS_READ_10;
+			h->cciss_write = CCISS_WRITE_10;
+		}
+	}
+
+	cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
+			       inq_buff, drvinfo);
+	drvinfo->block_size = block_size;
+	drvinfo->nr_blocks = total_size + 1;
+
+	cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
+			sizeof(drvinfo->serial_no));
+
+	/* Is it the same disk we already know, and nothing's changed? */
+	if (h->drv[drv_index].raid_level != -1 &&
+		((memcmp(drvinfo->serial_no,
+				h->drv[drv_index].serial_no, 16) == 0) &&
+		drvinfo->block_size == h->drv[drv_index].block_size &&
+		drvinfo->nr_blocks == h->drv[drv_index].nr_blocks &&
+		drvinfo->heads == h->drv[drv_index].heads &&
+		drvinfo->sectors == h->drv[drv_index].sectors &&
+		drvinfo->cylinders == h->drv[drv_index].cylinders))
+			/* The disk is unchanged, nothing to update */
+			goto freeret;
+
+	/* If we get here it's not the same disk, or something's changed,
+	 * so we need to * deregister it, and re-register it, if it's not
+	 * in use.
+	 * If the disk already exists then deregister it before proceeding
+	 * (unless it's the first disk (for the controller node).
+	 */
+	if (h->drv[drv_index].raid_level != -1 && drv_index != 0) {
+		printk(KERN_WARNING "disk %d has changed.\n", drv_index);
 		spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
 		h->drv[drv_index].busy_configuring = 1;
 		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 
-		/* deregister_disk sets h->drv[drv_index].queue = NULL */
-		/* which keeps the interrupt handler from starting */
-		/* the queue. */
+		/* deregister_disk sets h->drv[drv_index].queue = NULL
+		 * which keeps the interrupt handler from starting
+		 * the queue.
+		 */
 		ret = deregister_disk(h->gendisk[drv_index],
 				      &h->drv[drv_index], 0);
 		h->drv[drv_index].busy_configuring = 0;
@@ -1366,81 +1493,37 @@ static void cciss_update_drive_info(int ctlr, int drv_index)
 
 	/* If the disk is in use return */
 	if (ret)
-		return;
+		goto freeret;
 
-	/* Get information about the disk and modify the driver structure */
-	inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
-	if (inq_buff == NULL)
-		goto mem_msg;
-
- 	/* testing to see if 16-byte CDBs are already being used */
- 	if (h->cciss_read == CCISS_READ_16) {
- 		cciss_read_capacity_16(h->ctlr, drv_index, 1,
- 			&total_size, &block_size);
- 		goto geo_inq;
- 	}
-
-	cciss_read_capacity(ctlr, drv_index, 1,
-			    &total_size, &block_size);
-
-  	/* if read_capacity returns all F's this volume is >2TB in size */
-  	/* so we switch to 16-byte CDB's for all read/write ops */
-  	if (total_size == 0xFFFFFFFFULL) {
-		cciss_read_capacity_16(ctlr, drv_index, 1,
-		&total_size, &block_size);
-		h->cciss_read = CCISS_READ_16;
-		h->cciss_write = CCISS_WRITE_16;
-	} else {
-		h->cciss_read = CCISS_READ_10;
-		h->cciss_write = CCISS_WRITE_10;
-	}
-geo_inq:
-	cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
-			       inq_buff, &h->drv[drv_index]);
+	/* Save the new information from cciss_geometry_inquiry
+	 * and serial number inquiry.
+	 */
+	h->drv[drv_index].block_size = drvinfo->block_size;
+	h->drv[drv_index].nr_blocks = drvinfo->nr_blocks;
+	h->drv[drv_index].heads = drvinfo->heads;
+	h->drv[drv_index].sectors = drvinfo->sectors;
+	h->drv[drv_index].cylinders = drvinfo->cylinders;
+	h->drv[drv_index].raid_level = drvinfo->raid_level;
+	memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16);
 
 	++h->num_luns;
 	disk = h->gendisk[drv_index];
 	set_capacity(disk, h->drv[drv_index].nr_blocks);
 
-	/* if it's the controller it's already added */
-	if (drv_index) {
-		disk->queue = blk_init_queue(do_cciss_request, &h->lock);
-		sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index);
-		disk->major = h->major;
-		disk->first_minor = drv_index << NWD_SHIFT;
-		disk->fops = &cciss_fops;
-		disk->private_data = &h->drv[drv_index];
-
-		/* Set up queue information */
-		blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
-
-		/* This is a hardware imposed limit. */
-		blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
-
-		/* This is a limit in the driver and could be eliminated. */
-		blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
-
-		blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
-
-		blk_queue_softirq_done(disk->queue, cciss_softirq_done);
-
-		disk->queue->queuedata = hba[ctlr];
-
-		blk_queue_hardsect_size(disk->queue,
-					hba[ctlr]->drv[drv_index].block_size);
-
-		/* Make sure all queue data is written out before */
-		/* setting h->drv[drv_index].queue, as setting this */
-		/* allows the interrupt handler to start the queue */
-		wmb();
-		h->drv[drv_index].queue = disk->queue;
-		add_disk(disk);
-	}
+	/* If it's not disk 0 (drv_index != 0)
+	 * or if it was disk 0, but there was previously
+	 * no actual corresponding configured logical drive
+	 * (raid_leve == -1) then we want to update the
+	 * logical drive's information.
+	 */
+	if (drv_index || first_time)
+		cciss_add_disk(h, disk, drv_index);
 
-      freeret:
+freeret:
 	kfree(inq_buff);
+	kfree(drvinfo);
 	return;
-      mem_msg:
+mem_msg:
 	printk(KERN_ERR "cciss: out of memory\n");
 	goto freeret;
 }
@@ -1450,21 +1533,91 @@ geo_inq:
  * where new drives will be added.  If the index to be returned is greater
  * than the highest_lun index for the controller then highest_lun is set
  * to this new index.  If there are no available indexes then -1 is returned.
+ * "controller_node" is used to know if this is a real logical drive, or just
+ * the controller node, which determines if this counts towards highest_lun.
  */
-static int cciss_find_free_drive_index(int ctlr)
+static int cciss_find_free_drive_index(int ctlr, int controller_node)
 {
 	int i;
 
 	for (i = 0; i < CISS_MAX_LUN; i++) {
 		if (hba[ctlr]->drv[i].raid_level == -1) {
 			if (i > hba[ctlr]->highest_lun)
-				hba[ctlr]->highest_lun = i;
+				if (!controller_node)
+					hba[ctlr]->highest_lun = i;
 			return i;
 		}
 	}
 	return -1;
 }
 
+/* cciss_add_gendisk finds a free hba[]->drv structure
+ * and allocates a gendisk if needed, and sets the lunid
+ * in the drvinfo structure.   It returns the index into
+ * the ->drv[] array, or -1 if none are free.
+ * is_controller_node indicates whether highest_lun should
+ * count this disk, or if it's only being added to provide
+ * a means to talk to the controller in case no logical
+ * drives have yet been configured.
+ */
+static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
+{
+	int drv_index;
+
+	drv_index = cciss_find_free_drive_index(h->ctlr, controller_node);
+	if (drv_index == -1)
+		return -1;
+	/*Check if the gendisk needs to be allocated */
+	if (!h->gendisk[drv_index]) {
+		h->gendisk[drv_index] =
+			alloc_disk(1 << NWD_SHIFT);
+		if (!h->gendisk[drv_index]) {
+			printk(KERN_ERR "cciss%d: could not "
+				"allocate a new disk %d\n",
+				h->ctlr, drv_index);
+			return -1;
+		}
+	}
+	h->drv[drv_index].LunID = lunid;
+
+	/* Don't need to mark this busy because nobody */
+	/* else knows about this disk yet to contend */
+	/* for access to it. */
+	h->drv[drv_index].busy_configuring = 0;
+	wmb();
+	return drv_index;
+}
+
+/* This is for the special case of a controller which
+ * has no logical drives.  In this case, we still need
+ * to register a disk so the controller can be accessed
+ * by the Array Config Utility.
+ */
+static void cciss_add_controller_node(ctlr_info_t *h)
+{
+	struct gendisk *disk;
+	int drv_index;
+
+	if (h->gendisk[0] != NULL) /* already did this? Then bail. */
+		return;
+
+	drv_index = cciss_add_gendisk(h, 0, 1);
+	if (drv_index == -1) {
+		printk(KERN_WARNING "cciss%d: could not "
+			"add disk 0.\n", h->ctlr);
+		return;
+	}
+	h->drv[drv_index].block_size = 512;
+	h->drv[drv_index].nr_blocks = 0;
+	h->drv[drv_index].heads = 0;
+	h->drv[drv_index].sectors = 0;
+	h->drv[drv_index].cylinders = 0;
+	h->drv[drv_index].raid_level = -1;
+	memset(h->drv[drv_index].serial_no, 0, 16);
+	disk = h->gendisk[drv_index];
+	cciss_add_disk(h, disk, drv_index);
+}
+
 /* This function will add and remove logical drives from the Logical
  * drive array of the controller and maintain persistency of ordering
  * so that mount points are preserved until the next reboot.  This allows
@@ -1472,15 +1625,12 @@ static int cciss_find_free_drive_index(int ctlr)
  * without a re-ordering of those drives.
  * INPUT
  * h		= The controller to perform the operations on
- * del_disk	= The disk to remove if specified.  If the value given
- *		  is NULL then no disk is removed.
  */
-static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
+static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 {
 	int ctlr = h->ctlr;
 	int num_luns;
 	ReportLunData_struct *ld_buff = NULL;
-	drive_info_struct *drv = NULL;
 	int return_code;
 	int listlength = 0;
 	int i;
@@ -1489,6 +1639,9 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
 	__u32 lunid = 0;
 	unsigned long flags;
 
+	if (!capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
 	/* Set busy_configuring flag for this operation */
 	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
 	if (h->busy_configuring) {
@@ -1496,100 +1649,100 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
 		return -EBUSY;
 	}
 	h->busy_configuring = 1;
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 
-	/* if del_disk is NULL then we are being called to add a new disk
-	 * and update the logical drive table.  If it is not NULL then
-	 * we will check if the disk is in use or not.
-	 */
-	if (del_disk != NULL) {
-		drv = get_drv(del_disk);
-		drv->busy_configuring = 1;
-		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
-		return_code = deregister_disk(del_disk, drv, 1);
-		drv->busy_configuring = 0;
-		h->busy_configuring = 0;
-		return return_code;
-	} else {
-		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
-		if (!capable(CAP_SYS_RAWIO))
-			return -EPERM;
+	ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
+	if (ld_buff == NULL)
+		goto mem_msg;
 
-		ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
-		if (ld_buff == NULL)
-			goto mem_msg;
-
-		return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
-					      sizeof(ReportLunData_struct), 0,
-					      0, 0, TYPE_CMD);
-
-		if (return_code == IO_OK) {
-			listlength =
-				be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
-		} else {	/* reading number of logical volumes failed */
-			printk(KERN_WARNING "cciss: report logical volume"
-			       " command failed\n");
-			listlength = 0;
-			goto freeret;
-		}
+	return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
+				      sizeof(ReportLunData_struct), 0,
+				      0, 0, TYPE_CMD);
+
+	if (return_code == IO_OK)
+		listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
+	else {	/* reading number of logical volumes failed */
+		printk(KERN_WARNING "cciss: report logical volume"
+		       " command failed\n");
+		listlength = 0;
+		goto freeret;
+	}
+
+	num_luns = listlength / 8;	/* 8 bytes per entry */
+	if (num_luns > CISS_MAX_LUN) {
+		num_luns = CISS_MAX_LUN;
+		printk(KERN_WARNING "cciss: more luns configured"
+		       " on controller than can be handled by"
+		       " this driver.\n");
+	}
 
-		num_luns = listlength / 8;	/* 8 bytes per entry */
-		if (num_luns > CISS_MAX_LUN) {
-			num_luns = CISS_MAX_LUN;
-			printk(KERN_WARNING "cciss: more luns configured"
-			       " on controller than can be handled by"
-			       " this driver.\n");
+	if (num_luns == 0)
+		cciss_add_controller_node(h);
+
+	/* Compare controller drive array to driver's drive array
+	 * to see if any drives are missing on the controller due
+	 * to action of Array Config Utility (user deletes drive)
+	 * and deregister logical drives which have disappeared.
+	 */
+	for (i = 0; i <= h->highest_lun; i++) {
+		int j;
+		drv_found = 0;
+		for (j = 0; j < num_luns; j++) {
+			memcpy(&lunid, &ld_buff->LUN[j][0], 4);
+			lunid = le32_to_cpu(lunid);
+			if (h->drv[i].LunID == lunid) {
+				drv_found = 1;
+				break;
+			}
+		}
+		if (!drv_found) {
+			/* Deregister it from the OS, it's gone. */
+			spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+			h->drv[i].busy_configuring = 1;
+			spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+			return_code = deregister_disk(h->gendisk[i],
+				&h->drv[i], 1);
+			h->drv[i].busy_configuring = 0;
 		}
+	}
+
+	/* Compare controller drive array to driver's drive array.
+	 * Check for updates in the drive information and any new drives
+	 * on the controller due to ACU adding logical drives, or changing
+	 * a logical drive's size, etc.  Reregister any new/changed drives
+	 */
+	for (i = 0; i < num_luns; i++) {
+		int j;
+
+		drv_found = 0;
+
+		memcpy(&lunid, &ld_buff->LUN[i][0], 4);
+		lunid = le32_to_cpu(lunid);
 
-		/* Compare controller drive array to drivers drive array.
-		 * Check for updates in the drive information and any new drives
-		 * on the controller.
+		/* Find if the LUN is already in the drive array
+		 * of the driver.  If so then update its info
+		 * if not in use.  If it does not exist then find
+		 * the first free index and add it.
 		 */
-		for (i = 0; i < num_luns; i++) {
-			int j;
-
-			drv_found = 0;
-
-			lunid = (0xff &
-				 (unsigned int)(ld_buff->LUN[i][3])) << 24;
-			lunid |= (0xff &
-				  (unsigned int)(ld_buff->LUN[i][2])) << 16;
-			lunid |= (0xff &
-				  (unsigned int)(ld_buff->LUN[i][1])) << 8;
-			lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
-
-			/* Find if the LUN is already in the drive array
-			 * of the controller.  If so then update its info
-			 * if not is use.  If it does not exist then find
-			 * the first free index and add it.
-			 */
-			for (j = 0; j <= h->highest_lun; j++) {
-				if (h->drv[j].LunID == lunid) {
-					drv_index = j;
-					drv_found = 1;
-				}
+		for (j = 0; j <= h->highest_lun; j++) {
+			if (h->drv[j].raid_level != -1 &&
+				h->drv[j].LunID == lunid) {
+				drv_index = j;
+				drv_found = 1;
+				break;
 			}
+		}
 
-			/* check if the drive was found already in the array */
-			if (!drv_found) {
-				drv_index = cciss_find_free_drive_index(ctlr);
-				if (drv_index == -1)
-					goto freeret;
-
-				/*Check if the gendisk needs to be allocated */
-				if (!h->gendisk[drv_index]){
-					h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT);
-					if (!h->gendisk[drv_index]){
-						printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index);
-						goto mem_msg;
-					}
-				}
-			}
-			h->drv[drv_index].LunID = lunid;
-			cciss_update_drive_info(ctlr, drv_index);
-		}		/* end for */
-	}			/* end else */
+		/* check if the drive was found already in the array */
+		if (!drv_found) {
+			drv_index = cciss_add_gendisk(h, lunid, 0);
+			if (drv_index == -1)
+				goto freeret;
+		}
+		cciss_update_drive_info(ctlr, drv_index, first_time);
+	}		/* end for */
 
-      freeret:
+freeret:
 	kfree(ld_buff);
 	h->busy_configuring = 0;
 	/* We return -1 here to tell the ACU that we have registered/updated
@@ -1597,8 +1750,9 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
 	 * additional times.
 	 */
 	return -1;
-      mem_msg:
+mem_msg:
 	printk(KERN_ERR "cciss: out of memory\n");
+	h->busy_configuring = 0;
 	goto freeret;
 }
 
@@ -1654,15 +1808,15 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
 		 * other than disk 0 we will call put_disk.  We do not
 		 * do this for disk 0 as we need it to be able to
 		 * configure the controller.
-		*/
+		 */
 		if (clear_all){
 			/* This isn't pretty, but we need to find the
 			 * disk in our array and NULL our the pointer.
 			 * This is so that we will call alloc_disk if
 			 * this index is used again later.
-			*/
+			 */
 			for (i=0; i < CISS_MAX_LUN; i++){
-				if(h->gendisk[i] == disk){
+				if (h->gendisk[i] == disk) {
 					h->gendisk[i] = NULL;
 					break;
 				}
@@ -1690,7 +1844,7 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
 		if (drv == h->drv + h->highest_lun) {
 			/* if so, find the new hightest lun */
 			int i, newhighest = -1;
-			for (i = 0; i < h->highest_lun; i++) {
+			for (i = 0; i <= h->highest_lun; i++) {
 				/* if the disk has size > 0, it is available */
 				if (h->drv[i].heads)
 					newhighest = i;
@@ -3201,136 +3355,9 @@ err_out_free_res:
 	return err;
 }
 
-/*
- * Gets information about the local volumes attached to the controller.
+/* Function to find the first free pointer into our hba[] array
+ * Returns -1 if no free entries are left.
  */
-static void cciss_getgeometry(int cntl_num)
-{
-	ReportLunData_struct *ld_buff;
-	InquiryData_struct *inq_buff;
-	int return_code;
-	int i;
-	int listlength = 0;
-	__u32 lunid = 0;
-	unsigned block_size;
-	sector_t total_size;
-
-	ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
-	if (ld_buff == NULL) {
-		printk(KERN_ERR "cciss: out of memory\n");
-		return;
-	}
-	inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
-	if (inq_buff == NULL) {
-		printk(KERN_ERR "cciss: out of memory\n");
-		kfree(ld_buff);
-		return;
-	}
-	/* Get the firmware version */
-	return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff,
-			      sizeof(InquiryData_struct), 0, 0, 0, NULL,
-			      TYPE_CMD);
-	if (return_code == IO_OK) {
-		hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32];
-		hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33];
-		hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34];
-		hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35];
-	} else {		/* send command failed */
-
-		printk(KERN_WARNING "cciss: unable to determine firmware"
-		       " version of controller\n");
-	}
-	/* Get the number of logical volumes */
-	return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff,
-			      sizeof(ReportLunData_struct), 0, 0, 0, NULL,
-			      TYPE_CMD);
-
-	if (return_code == IO_OK) {
-#ifdef CCISS_DEBUG
-		printk("LUN Data\n--------------------------\n");
-#endif				/* CCISS_DEBUG */
-
-		listlength |=
-		    (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
-		listlength |=
-		    (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
-		listlength |=
-		    (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
-		listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
-	} else {		/* reading number of logical volumes failed */
-
-		printk(KERN_WARNING "cciss: report logical volume"
-		       " command failed\n");
-		listlength = 0;
-	}
-	hba[cntl_num]->num_luns = listlength / 8;	// 8 bytes pre entry
-	if (hba[cntl_num]->num_luns > CISS_MAX_LUN) {
-		printk(KERN_ERR
-		       "ciss:  only %d number of logical volumes supported\n",
-		       CISS_MAX_LUN);
-		hba[cntl_num]->num_luns = CISS_MAX_LUN;
-	}
-#ifdef CCISS_DEBUG
-	printk(KERN_DEBUG "Length = %x %x %x %x = %d\n",
-	       ld_buff->LUNListLength[0], ld_buff->LUNListLength[1],
-	       ld_buff->LUNListLength[2], ld_buff->LUNListLength[3],
-	       hba[cntl_num]->num_luns);
-#endif				/* CCISS_DEBUG */
-
-	hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns - 1;
-	for (i = 0; i < CISS_MAX_LUN; i++) {
-		if (i < hba[cntl_num]->num_luns) {
-			lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3]))
-			    << 24;
-			lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2]))
-			    << 16;
-			lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1]))
-			    << 8;
-			lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
-
-			hba[cntl_num]->drv[i].LunID = lunid;
-
-#ifdef CCISS_DEBUG
-			printk(KERN_DEBUG "LUN[%d]:  %x %x %x %x = %x\n", i,
-			       ld_buff->LUN[i][0], ld_buff->LUN[i][1],
-			       ld_buff->LUN[i][2], ld_buff->LUN[i][3],
-			       hba[cntl_num]->drv[i].LunID);
-#endif				/* CCISS_DEBUG */
-
-		/* testing to see if 16-byte CDBs are already being used */
-		if(hba[cntl_num]->cciss_read == CCISS_READ_16) {
-			cciss_read_capacity_16(cntl_num, i, 0,
-					    &total_size, &block_size);
-			goto geo_inq;
-		}
-		cciss_read_capacity(cntl_num, i, 0, &total_size, &block_size);
-
-		/* If read_capacity returns all F's the logical is >2TB */
-		/* so we switch to 16-byte CDBs for all read/write ops */
-		if(total_size == 0xFFFFFFFFULL) {
-			cciss_read_capacity_16(cntl_num, i, 0,
-			&total_size, &block_size);
-			hba[cntl_num]->cciss_read = CCISS_READ_16;
-			hba[cntl_num]->cciss_write = CCISS_WRITE_16;
-		} else {
-			hba[cntl_num]->cciss_read = CCISS_READ_10;
-			hba[cntl_num]->cciss_write = CCISS_WRITE_10;
-		}
-geo_inq:
-			cciss_geometry_inquiry(cntl_num, i, 0, total_size,
-					       block_size, inq_buff,
-					       &hba[cntl_num]->drv[i]);
-		} else {
-			/* initialize raid_level to indicate a free space */
-			hba[cntl_num]->drv[i].raid_level = -1;
-		}
-	}
-	kfree(ld_buff);
-	kfree(inq_buff);
-}
-
-/* Function to find the first free pointer into our hba[] array */
-/* Returns -1 if no free entries are left.  */
 static int alloc_cciss_hba(void)
 {
 	int i;
@@ -3342,11 +3369,6 @@ static int alloc_cciss_hba(void)
 			p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
 			if (!p)
 				goto Enomem;
-			p->gendisk[0] = alloc_disk(1 << NWD_SHIFT);
-			if (!p->gendisk[0]) {
-				kfree(p);
-				goto Enomem;
-			}
 			hba[i] = p;
 			return i;
 		}
@@ -3474,11 +3496,13 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	       ((hba[i]->nr_cmds + BITS_PER_LONG -
 		 1) / BITS_PER_LONG) * sizeof(unsigned long));
 
-#ifdef CCISS_DEBUG
-	printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n", i);
-#endif				/* CCISS_DEBUG */
-
-	cciss_getgeometry(i);
+	hba[i]->num_luns = 0;
+	hba[i]->highest_lun = -1;
+	for (j = 0; j < CISS_MAX_LUN; j++) {
+		hba[i]->drv[j].raid_level = -1;
+		hba[i]->drv[j].queue = NULL;
+		hba[i]->gendisk[j] = NULL;
+	}
 
 	cciss_scsi_setup(i);
 
@@ -3491,76 +3515,10 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 
 	hba[i]->busy_initializing = 0;
 
-	do {
-		drive_info_struct *drv = &(hba[i]->drv[j]);
-		struct gendisk *disk = hba[i]->gendisk[j];
-		struct request_queue *q;
-
-		/* Check if the disk was allocated already */
-		if (!disk){
-			hba[i]->gendisk[j] = alloc_disk(1 << NWD_SHIFT);
-			disk = hba[i]->gendisk[j];
-		}
-
-		/* Check that the disk was able to be allocated */
-		if (!disk) {
-			printk(KERN_ERR "cciss: unable to allocate memory for disk %d\n", j);
-			goto clean4;
-		}
-
-		q = blk_init_queue(do_cciss_request, &hba[i]->lock);
-		if (!q) {
-			printk(KERN_ERR
-			       "cciss:  unable to allocate queue for disk %d\n",
-			       j);
-			goto clean4;
-		}
-		drv->queue = q;
-
-		blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
-
-		/* This is a hardware imposed limit. */
-		blk_queue_max_hw_segments(q, MAXSGENTRIES);
-
-		/* This is a limit in the driver and could be eliminated. */
-		blk_queue_max_phys_segments(q, MAXSGENTRIES);
-
-		blk_queue_max_sectors(q, hba[i]->cciss_max_sectors);
-
-		blk_queue_softirq_done(q, cciss_softirq_done);
-
-		q->queuedata = hba[i];
-		sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
-		disk->major = hba[i]->major;
-		disk->first_minor = j << NWD_SHIFT;
-		disk->fops = &cciss_fops;
-		disk->queue = q;
-		disk->private_data = drv;
-		disk->driverfs_dev = &pdev->dev;
-		/* we must register the controller even if no disks exist */
-		/* this is for the online array utilities */
-		if (!drv->heads && j)
-			continue;
-		blk_queue_hardsect_size(q, drv->block_size);
-		set_capacity(disk, drv->nr_blocks);
-		j++;
-	} while (j <= hba[i]->highest_lun);
-
-	/* Make sure all queue data is written out before */
-	/* interrupt handler, triggered by add_disk,  */
-	/* is allowed to start them. */
-	wmb();
-
-	for (j = 0; j <= hba[i]->highest_lun; j++)
-		add_disk(hba[i]->gendisk[j]);
-
-	/* we must register the controller even if no disks exist */
-	if (hba[i]->highest_lun == -1)
-		add_disk(hba[i]->gendisk[0]);
-
+	rebuild_lun_table(hba[i], 1);
 	return 1;
 
-      clean4:
+clean4:
 #ifdef CONFIG_CISS_SCSI_TAPE
 	kfree(hba[i]->scsi_rejects.complete);
 #endif
@@ -3575,9 +3533,9 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 				    hba[i]->errinfo_pool,
 				    hba[i]->errinfo_pool_dhandle);
 	free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
-      clean2:
+clean2:
 	unregister_blkdev(hba[i]->major, hba[i]->devname);
-      clean1:
+clean1:
 	hba[i]->busy_initializing = 0;
 	/* cleanup any queues that may have been initialized */
 	for (j=0; j <= hba[i]->highest_lun; j++){
@@ -3656,7 +3614,9 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
 		}
 	}
 
+#ifdef CONFIG_CISS_SCSI_TAPE
 	cciss_unregister_scsi(i);	/* unhook from SCSI subsystem */
+#endif
 
 	cciss_shutdown(pdev);
 
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index b70988dd33e..24a7efa993a 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -39,6 +39,8 @@ typedef struct _drive_info_struct
 				   *to prevent it from being opened or it's queue
 				   *from being started.
 				  */
+	__u8 serial_no[16]; /* from inquiry page 0x83, */
+			    /* not necc. null terminated. */
 } drive_info_struct;
 
 #ifdef CONFIG_CISS_SCSI_TAPE
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index e4bf9a11ca0..e1233aabda7 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -358,23 +358,68 @@ find_bus_target_lun(int ctlr, int *bus, int *target, int *lun)
 	}
 	return (!found);	
 }
+struct scsi2map {
+	char scsi3addr[8];
+	int bus, target, lun;
+};
 
 static int 
 cciss_scsi_add_entry(int ctlr, int hostno, 
-		unsigned char *scsi3addr, int devtype)
+		unsigned char *scsi3addr, int devtype,
+		struct scsi2map *added, int *nadded)
 {
 	/* assumes hba[ctlr]->scsi_ctlr->lock is held */ 
 	int n = ccissscsi[ctlr].ndevices;
 	struct cciss_scsi_dev_t *sd;
+	int i, bus, target, lun;
+	unsigned char addr1[8], addr2[8];
 
 	if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
 		printk("cciss%d: Too many devices, "
 			"some will be inaccessible.\n", ctlr);
 		return -1;
 	}
+
+	bus = target = -1;
+	lun = 0;
+	/* Is this device a non-zero lun of a multi-lun device */
+	/* byte 4 of the 8-byte LUN addr will contain the logical unit no. */
+	if (scsi3addr[4] != 0) {
+		/* Search through our list and find the device which */
+		/* has the same 8 byte LUN address, excepting byte 4. */
+		/* Assign the same bus and target for this new LUN. */
+		/* Use the logical unit number from the firmware. */
+		memcpy(addr1, scsi3addr, 8);
+		addr1[4] = 0;
+		for (i = 0; i < n; i++) {
+			sd = &ccissscsi[ctlr].dev[i];
+			memcpy(addr2, sd->scsi3addr, 8);
+			addr2[4] = 0;
+			/* differ only in byte 4? */
+			if (memcmp(addr1, addr2, 8) == 0) {
+				bus = sd->bus;
+				target = sd->target;
+				lun = scsi3addr[4];
+				break;
+			}
+		}
+	}
+
 	sd = &ccissscsi[ctlr].dev[n];
-	if (find_bus_target_lun(ctlr, &sd->bus, &sd->target, &sd->lun) != 0)
-		return -1;
+	if (lun == 0) {
+		if (find_bus_target_lun(ctlr,
+			&sd->bus, &sd->target, &sd->lun) != 0)
+			return -1;
+	} else {
+		sd->bus = bus;
+		sd->target = target;
+		sd->lun = lun;
+	}
+	added[*nadded].bus = sd->bus;
+	added[*nadded].target = sd->target;
+	added[*nadded].lun = sd->lun;
+	(*nadded)++;
+
 	memcpy(&sd->scsi3addr[0], scsi3addr, 8);
 	sd->devtype = devtype;
 	ccissscsi[ctlr].ndevices++;
@@ -390,7 +435,8 @@ cciss_scsi_add_entry(int ctlr, int hostno,
 }
 
 static void
-cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
+cciss_scsi_remove_entry(int ctlr, int hostno, int entry,
+	struct scsi2map *removed, int *nremoved)
 {
 	/* assumes hba[ctlr]->scsi_ctlr->lock is held */ 
 	int i;
@@ -398,6 +444,10 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
 
 	if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return;
 	sd = ccissscsi[ctlr].dev[entry];
+	removed[*nremoved].bus    = sd.bus;
+	removed[*nremoved].target = sd.target;
+	removed[*nremoved].lun    = sd.lun;
+	(*nremoved)++;
 	for (i=entry;i<ccissscsi[ctlr].ndevices-1;i++)
 		ccissscsi[ctlr].dev[i] = ccissscsi[ctlr].dev[i+1];
 	ccissscsi[ctlr].ndevices--;
@@ -417,6 +467,26 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
 	(a)[1] == (b)[1] && \
 	(a)[0] == (b)[0])
 
+static void fixup_botched_add(int ctlr, char *scsi3addr)
+{
+	/* called when scsi_add_device fails in order to re-adjust */
+	/* ccissscsi[] to match the mid layer's view. */
+	unsigned long flags;
+	int i, j;
+	CPQ_TAPE_LOCK(ctlr, flags);
+	for (i = 0; i < ccissscsi[ctlr].ndevices; i++) {
+		if (memcmp(scsi3addr,
+				ccissscsi[ctlr].dev[i].scsi3addr, 8) == 0) {
+			for (j = i; j < ccissscsi[ctlr].ndevices-1; j++)
+				ccissscsi[ctlr].dev[j] =
+					ccissscsi[ctlr].dev[j+1];
+			ccissscsi[ctlr].ndevices--;
+			break;
+		}
+	}
+	CPQ_TAPE_UNLOCK(ctlr, flags);
+}
+
 static int
 adjust_cciss_scsi_table(int ctlr, int hostno,
 	struct cciss_scsi_dev_t sd[], int nsds)
@@ -429,13 +499,33 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 	int i,j, found, changes=0;
 	struct cciss_scsi_dev_t *csd;
 	unsigned long flags;
+	struct scsi2map *added, *removed;
+	int nadded, nremoved;
+	struct Scsi_Host *sh = NULL;
+
+	added = kzalloc(sizeof(*added) * CCISS_MAX_SCSI_DEVS_PER_HBA,
+			GFP_KERNEL);
+	removed = kzalloc(sizeof(*removed) * CCISS_MAX_SCSI_DEVS_PER_HBA,
+			GFP_KERNEL);
+
+	if (!added || !removed) {
+		printk(KERN_WARNING "cciss%d: Out of memory in "
+			"adjust_cciss_scsi_table\n", ctlr);
+		goto free_and_out;
+	}
 
 	CPQ_TAPE_LOCK(ctlr, flags);
 
+	if (hostno != -1)  /* if it's not the first time... */
+		sh = ((struct cciss_scsi_adapter_data_t *)
+			hba[ctlr]->scsi_ctlr)->scsi_host;
+
 	/* find any devices in ccissscsi[] that are not in 
 	   sd[] and remove them from ccissscsi[] */
 
 	i = 0;
+	nremoved = 0;
+	nadded = 0;
 	while(i<ccissscsi[ctlr].ndevices) {
 		csd = &ccissscsi[ctlr].dev[i];
 		found=0;
@@ -455,8 +545,9 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 			/* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
 				ctlr, scsi_device_type(csd->devtype), hostno,
 					csd->bus, csd->target, csd->lun); */
-			cciss_scsi_remove_entry(ctlr, hostno, i);
-			/* note, i not incremented */
+			cciss_scsi_remove_entry(ctlr, hostno, i,
+				removed, &nremoved);
+			/* remove ^^^, hence i not incremented */
 		} 
 		else if (found == 1) { /* device is different kind */
 			changes++;
@@ -464,8 +555,15 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 				"(device type now %s).\n",
 				ctlr, hostno, csd->bus, csd->target, csd->lun,
 					scsi_device_type(csd->devtype));
+			cciss_scsi_remove_entry(ctlr, hostno, i,
+				removed, &nremoved);
+			/* remove ^^^, hence i not incremented */
+			if (cciss_scsi_add_entry(ctlr, hostno,
+				&sd[j].scsi3addr[0], sd[j].devtype,
+				added, &nadded) != 0)
+				/* we just removed one, so add can't fail. */
+					BUG();
 			csd->devtype = sd[j].devtype;
-			i++;	/* so just move along. */
 		} else 		/* device is same as it ever was, */
 			i++;	/* so just move along. */
 	}
@@ -489,7 +587,9 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 		if (!found) {
 			changes++;
 			if (cciss_scsi_add_entry(ctlr, hostno, 
-				&sd[i].scsi3addr[0], sd[i].devtype) != 0)
+
+				&sd[i].scsi3addr[0], sd[i].devtype,
+				added, &nadded) != 0)
 				break;
 		} else if (found == 1) {
 			/* should never happen... */
@@ -501,9 +601,50 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 	}
 	CPQ_TAPE_UNLOCK(ctlr, flags);
 
-	if (!changes) 
-		printk("cciss%d: No device changes detected.\n", ctlr);
+	/* Don't notify scsi mid layer of any changes the first time through */
+	/* (or if there are no changes) scsi_scan_host will do it later the */
+	/* first time through. */
+	if (hostno == -1 || !changes)
+		goto free_and_out;
+
+	/* Notify scsi mid layer of any removed devices */
+	for (i = 0; i < nremoved; i++) {
+		struct scsi_device *sdev =
+			scsi_device_lookup(sh, removed[i].bus,
+				removed[i].target, removed[i].lun);
+		if (sdev != NULL) {
+			scsi_remove_device(sdev);
+			scsi_device_put(sdev);
+		} else {
+			/* We don't expect to get here. */
+			/* future cmds to this device will get selection */
+			/* timeout as if the device was gone. */
+			printk(KERN_WARNING "cciss%d: didn't find "
+				"c%db%dt%dl%d\n for removal.",
+				ctlr, hostno, removed[i].bus,
+				removed[i].target, removed[i].lun);
+		}
+	}
+
+	/* Notify scsi mid layer of any added devices */
+	for (i = 0; i < nadded; i++) {
+		int rc;
+		rc = scsi_add_device(sh, added[i].bus,
+			added[i].target, added[i].lun);
+		if (rc == 0)
+			continue;
+		printk(KERN_WARNING "cciss%d: scsi_add_device "
+			"c%db%dt%dl%d failed, device not added.\n",
+			ctlr, hostno,
+			added[i].bus, added[i].target, added[i].lun);
+		/* now we have to remove it from ccissscsi, */
+		/* since it didn't get added to scsi mid layer */
+		fixup_botched_add(ctlr, added[i].scsi3addr);
+	}
 
+free_and_out:
+	kfree(added);
+	kfree(removed);
 	return 0;
 }
 
@@ -1355,32 +1496,6 @@ cciss_unregister_scsi(int ctlr)
 }
 
 static int 
-cciss_register_scsi(int ctlr)
-{
-	unsigned long flags;
-
-	CPQ_TAPE_LOCK(ctlr, flags);
-
-	/* Since this is really a block driver, the SCSI core may not be 
-	   initialized at init time, in which case, calling scsi_register_host
-	   would hang.  Instead, we do it later, via /proc filesystem
-	   and rc scripts, when we know SCSI core is good to go. */
-
-	/* Only register if SCSI devices are detected. */
-	if (ccissscsi[ctlr].ndevices != 0) {
-		((struct cciss_scsi_adapter_data_t *) 
-			hba[ctlr]->scsi_ctlr)->registered = 1;
-		CPQ_TAPE_UNLOCK(ctlr, flags);
-		return cciss_scsi_detect(ctlr);
-	}
-	CPQ_TAPE_UNLOCK(ctlr, flags);
-	printk(KERN_INFO 
-		"cciss%d: No appropriate SCSI device detected, "
-		"SCSI subsystem not engaged.\n", ctlr);
-	return 0;
-}
-
-static int 
 cciss_engage_scsi(int ctlr)
 {
 	struct cciss_scsi_adapter_data_t *sa;
@@ -1391,15 +1506,15 @@ cciss_engage_scsi(int ctlr)
 	sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
 	stk = &sa->cmd_stack; 
 
-	if (((struct cciss_scsi_adapter_data_t *) 
-		hba[ctlr]->scsi_ctlr)->registered) {
+	if (sa->registered) {
 		printk("cciss%d: SCSI subsystem already engaged.\n", ctlr);
 		spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 		return ENXIO;
 	}
+	sa->registered = 1;
 	spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 	cciss_update_non_disk_devices(ctlr, -1);
-	cciss_register_scsi(ctlr);
+	cciss_scsi_detect(ctlr);
 	return 0;
 }
 
@@ -1493,7 +1608,5 @@ static int  cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
 /* If no tape support, then these become defined out of existence */
 
 #define cciss_scsi_setup(cntl_num)
-#define cciss_unregister_scsi(ctlr)
-#define cciss_register_scsi(ctlr)
 
 #endif /* CONFIG_CISS_SCSI_TAPE */
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index ad98dda6037..1778e4a2c67 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -707,15 +707,15 @@ static int __init nbd_init(void)
 
 	BUILD_BUG_ON(sizeof(struct nbd_request) != 28);
 
-	nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
-	if (!nbd_dev)
-		return -ENOMEM;
-
 	if (max_part < 0) {
 		printk(KERN_CRIT "nbd: max_part must be >= 0\n");
 		return -EINVAL;
 	}
 
+	nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
+	if (!nbd_dev)
+		return -ENOMEM;
+
 	part_shift = 0;
 	if (max_part > 0)
 		part_shift = fls(max_part);
@@ -779,6 +779,7 @@ out:
 		blk_cleanup_queue(nbd_dev[i].disk->queue);
 		put_disk(nbd_dev[i].disk);
 	}
+	kfree(nbd_dev);
 	return err;
 }
 
@@ -795,6 +796,7 @@ static void __exit nbd_cleanup(void)
 		}
 	}
 	unregister_blkdev(NBD_MAJOR, "nbd");
+	kfree(nbd_dev);
 	printk(KERN_INFO "nbd: unregistered device at major %d\n", NBD_MAJOR);
 }
 
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 158eed4d516..29b7a648cc6 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -49,7 +49,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/kthread.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/spinlock.h>
 #include <linux/file.h>
@@ -2798,14 +2797,9 @@ out_mem:
 	return ret;
 }
 
-static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct inode *inode = file->f_path.dentry->d_inode;
-	struct pktcdvd_device *pd;
-	long ret;
-
-	lock_kernel();
-	pd = inode->i_bdev->bd_disk->private_data;
+	struct pktcdvd_device *pd = inode->i_bdev->bd_disk->private_data;
 
 	VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd, imajor(inode), iminor(inode));
 
@@ -2818,8 +2812,7 @@ static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case CDROM_LAST_WRITTEN:
 	case CDROM_SEND_PACKET:
 	case SCSI_IOCTL_SEND_COMMAND:
-		ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
-		break;
+		return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
 
 	case CDROMEJECT:
 		/*
@@ -2828,15 +2821,14 @@ static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		 */
 		if (pd->refcnt == 1)
 			pkt_lock_door(pd, 0);
-		ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
-		break;
+		return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
 
 	default:
 		VPRINTK(DRIVER_NAME": Unknown ioctl for %s (%x)\n", pd->name, cmd);
-		ret = -ENOTTY;
+		return -ENOTTY;
 	}
-	unlock_kernel();
-	return ret;
+
+	return 0;
 }
 
 static int pkt_media_changed(struct gendisk *disk)
@@ -2858,7 +2850,7 @@ static struct block_device_operations pktcdvd_ops = {
 	.owner =		THIS_MODULE,
 	.open =			pkt_open,
 	.release =		pkt_close,
-	.unlocked_ioctl =	pkt_ioctl,
+	.ioctl =		pkt_ioctl,
 	.media_changed =	pkt_media_changed,
 };
 
@@ -3023,8 +3015,7 @@ static void pkt_get_status(struct pkt_ctrl_command *ctrl_cmd)
 	mutex_unlock(&ctl_mutex);
 }
 
-static long pkt_ctl_ioctl(struct file *file, unsigned int cmd,
-						unsigned long arg)
+static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	struct pkt_ctrl_command ctrl_cmd;
@@ -3041,22 +3032,16 @@ static long pkt_ctl_ioctl(struct file *file, unsigned int cmd,
 	case PKT_CTRL_CMD_SETUP:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		lock_kernel();
 		ret = pkt_setup_dev(new_decode_dev(ctrl_cmd.dev), &pkt_dev);
 		ctrl_cmd.pkt_dev = new_encode_dev(pkt_dev);
-		unlock_kernel();
 		break;
 	case PKT_CTRL_CMD_TEARDOWN:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		lock_kernel();
 		ret = pkt_remove_dev(new_decode_dev(ctrl_cmd.pkt_dev));
-		unlock_kernel();
 		break;
 	case PKT_CTRL_CMD_STATUS:
-		lock_kernel();
 		pkt_get_status(&ctrl_cmd);
-		unlock_kernel();
 		break;
 	default:
 		return -ENOTTY;
@@ -3069,7 +3054,7 @@ static long pkt_ctl_ioctl(struct file *file, unsigned int cmd,
 
 
 static const struct file_operations pkt_ctl_fops = {
-	.unlocked_ioctl	 = pkt_ctl_ioctl,
+	.ioctl	 = pkt_ctl_ioctl,
 	.owner	 = THIS_MODULE,
 };
 
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 9ae05c58423..3ca643cafcc 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -154,8 +154,8 @@ static int blkif_getgeo(struct block_device *bd, struct hd_geometry *hg)
 	return 0;
 }
 
-int blkif_ioctl(struct inode *inode, struct file *filep,
-		unsigned command, unsigned long argument)
+static int blkif_ioctl(struct inode *inode, struct file *filep,
+		       unsigned command, unsigned long argument)
 {
 	struct blkfront_info *info =
 		inode->i_bdev->bd_disk->private_data;
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index a235ca78746..7cb4029a537 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -3,8 +3,8 @@ menu "Bluetooth device drivers"
 	depends on BT
 
 config BT_HCIUSB
-	tristate "HCI USB driver"
-	depends on USB
+	tristate "HCI USB driver (old version)"
+	depends on USB && BT_HCIBTUSB=n
 	help
 	  Bluetooth HCI USB driver.
 	  This driver is required if you want to use Bluetooth devices with
@@ -23,15 +23,13 @@ config BT_HCIUSB_SCO
 	  Say Y here to compile support for SCO over HCI USB.
 
 config BT_HCIBTUSB
-	tristate "HCI USB driver (alternate version)"
-	depends on USB && EXPERIMENTAL && BT_HCIUSB=n
+	tristate "HCI USB driver"
+	depends on USB
 	help
 	  Bluetooth HCI USB driver.
 	  This driver is required if you want to use Bluetooth devices with
 	  USB interface.
 
-          This driver is still experimental and has no SCO support.
-
 	  Say Y here to compile support for Bluetooth USB devices into the
 	  kernel or say M to compile it as module (btusb).
 
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
index 8919ccf8274..ee40201c727 100644
--- a/drivers/bluetooth/bcm203x.c
+++ b/drivers/bluetooth/bcm203x.c
@@ -42,9 +42,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "1.1"
-
-static int ignore = 0;
+#define VERSION "1.2"
 
 static struct usb_device_id bcm203x_table[] = {
 	/* Broadcom Blutonium (BCM2033) */
@@ -175,7 +173,7 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id
 
 	BT_DBG("intf %p id %p", intf, id);
 
-	if (ignore || (intf->cur_altsetting->desc.bInterfaceNumber != 0))
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 		return -ENODEV;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
@@ -300,9 +298,6 @@ static void __exit bcm203x_exit(void)
 module_init(bcm203x_init);
 module_exit(bcm203x_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Broadcom Blutonium firmware driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
index 0c211adbc06..90a09463463 100644
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -43,9 +43,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "1.1"
-
-static int ignore = 0;
+#define VERSION "1.2"
 
 static struct usb_driver bfusb_driver;
 
@@ -656,9 +654,6 @@ static int bfusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	BT_DBG("intf %p id %p", intf, id);
 
-	if (ignore)
-		return -ENODEV;
-
 	/* Check number of endpoints */
 	if (intf->cur_altsetting->desc.bNumEndpoints < 2)
 		return -EIO;
@@ -795,9 +790,6 @@ static void __exit bfusb_exit(void)
 module_init(bfusb_init);
 module_exit(bfusb_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("BlueFRITZ! USB driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index 3b28658f5a1..1e55a658e6c 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -40,9 +40,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "0.9"
-
-static int ignore = 0;
+#define VERSION "0.10"
 
 static struct usb_device_id bpa10x_table[] = {
 	/* Tektronix BPA 100/105 (Digianswer) */
@@ -460,9 +458,6 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *
 
 	BT_DBG("intf %p id %p", intf, id);
 
-	if (ignore)
-		return -ENODEV;
-
 	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 		return -ENODEV;
 
@@ -546,9 +541,6 @@ static void __exit bpa10x_exit(void)
 module_init(bpa10x_init);
 module_exit(bpa10x_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Digianswer Bluetooth USB driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 593b7c59503..27058477cc8 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -60,7 +60,7 @@
 /* ======================== Module parameters ======================== */
 
 
-MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>, Jose Orlando Pereira <jop@di.uminho.pt>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
 MODULE_LICENSE("GPL");
 MODULE_FIRMWARE("BT3CPCC.bin");
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 12e108914f1..6a010681ecf 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2,7 +2,7 @@
  *
  *  Generic Bluetooth USB driver
  *
- *  Copyright (C) 2005-2007  Marcel Holtmann <marcel@holtmann.org>
+ *  Copyright (C) 2005-2008  Marcel Holtmann <marcel@holtmann.org>
  *
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -41,27 +41,135 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "0.1"
+#define VERSION "0.3"
+
+static int ignore_dga;
+static int ignore_csr;
+static int ignore_sniffer;
+static int disable_scofix;
+static int force_scofix;
+static int reset;
+
+static struct usb_driver btusb_driver;
+
+#define BTUSB_IGNORE		0x01
+#define BTUSB_RESET		0x02
+#define BTUSB_DIGIANSWER	0x04
+#define BTUSB_CSR		0x08
+#define BTUSB_SNIFFER		0x10
+#define BTUSB_BCM92035		0x20
+#define BTUSB_BROKEN_ISOC	0x40
+#define BTUSB_WRONG_SCO_MTU	0x80
 
 static struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
 	{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
 
+	/* AVM BlueFRITZ! USB v2.0 */
+	{ USB_DEVICE(0x057c, 0x3800) },
+
+	/* Bluetooth Ultraport Module from IBM */
+	{ USB_DEVICE(0x04bf, 0x030a) },
+
+	/* ALPS Modules with non-standard id */
+	{ USB_DEVICE(0x044e, 0x3001) },
+	{ USB_DEVICE(0x044e, 0x3002) },
+
+	/* Ericsson with non-standard id */
+	{ USB_DEVICE(0x0bdb, 0x1002) },
+
+	/* Canyon CN-BTU1 with HID interfaces */
+	{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_RESET },
+
 	{ }	/* Terminating entry */
 };
 
 MODULE_DEVICE_TABLE(usb, btusb_table);
 
 static struct usb_device_id blacklist_table[] = {
+	/* CSR BlueCore devices */
+	{ USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
+
+	/* Broadcom BCM2033 without firmware */
+	{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
+
+	/* Broadcom BCM2035 */
+	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Broadcom BCM2045 */
+	{ USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Broadcom BCM2046 */
+	{ USB_DEVICE(0x0a5c, 0x2151), .driver_info = BTUSB_RESET },
+
+	/* IBM/Lenovo ThinkPad with Broadcom chip */
+	{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Targus ACB10US */
+	{ USB_DEVICE(0x0a5c, 0x2100), .driver_info = BTUSB_RESET },
+
+	/* ANYCOM Bluetooth USB-200 and USB-250 */
+	{ USB_DEVICE(0x0a5c, 0x2111), .driver_info = BTUSB_RESET },
+
+	/* HP laptop with Broadcom chip */
+	{ USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Dell laptop with Broadcom chip */
+	{ USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Dell Wireless 370 */
+	{ USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Dell Wireless 410 */
+	{ USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
+	{ USB_DEVICE(0x045e, 0x009c), .driver_info = BTUSB_RESET },
+
+	/* Kensington Bluetooth USB adapter */
+	{ USB_DEVICE(0x047d, 0x105d), .driver_info = BTUSB_RESET },
+	{ USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* ISSC Bluetooth Adapter v3.1 */
+	{ USB_DEVICE(0x1131, 0x1001), .driver_info = BTUSB_RESET },
+
+	/* RTX Telecom based adapters with buggy SCO support */
+	{ USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
+	{ USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
+
+	/* CONWISE Technology based adapters with buggy SCO support */
+	{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
+
+	/* Belkin F8T012 and F8T013 devices */
+	{ USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
+
+	/* Digianswer devices */
+	{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
+	{ USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
+
+	/* CSR BlueCore Bluetooth Sniffer */
+	{ USB_DEVICE(0x0a12, 0x0002), .driver_info = BTUSB_SNIFFER },
+
+	/* Frontline ComProbe Bluetooth Sniffer */
+	{ USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER },
+
 	{ }	/* Terminating entry */
 };
 
+#define BTUSB_MAX_ISOC_FRAMES	10
+
 #define BTUSB_INTR_RUNNING	0
 #define BTUSB_BULK_RUNNING	1
+#define BTUSB_ISOC_RUNNING	2
 
 struct btusb_data {
 	struct hci_dev       *hdev;
 	struct usb_device    *udev;
+	struct usb_interface *isoc;
 
 	spinlock_t lock;
 
@@ -72,10 +180,15 @@ struct btusb_data {
 	struct usb_anchor tx_anchor;
 	struct usb_anchor intr_anchor;
 	struct usb_anchor bulk_anchor;
+	struct usb_anchor isoc_anchor;
 
 	struct usb_endpoint_descriptor *intr_ep;
 	struct usb_endpoint_descriptor *bulk_tx_ep;
 	struct usb_endpoint_descriptor *bulk_rx_ep;
+	struct usb_endpoint_descriptor *isoc_tx_ep;
+	struct usb_endpoint_descriptor *isoc_rx_ep;
+
+	int isoc_altsetting;
 };
 
 static void btusb_intr_complete(struct urb *urb)
@@ -91,6 +204,8 @@ static void btusb_intr_complete(struct urb *urb)
 		return;
 
 	if (urb->status == 0) {
+		hdev->stat.byte_rx += urb->actual_length;
+
 		if (hci_recv_fragment(hdev, HCI_EVENT_PKT,
 						urb->transfer_buffer,
 						urb->actual_length) < 0) {
@@ -112,7 +227,7 @@ static void btusb_intr_complete(struct urb *urb)
 	}
 }
 
-static inline int btusb_submit_intr_urb(struct hci_dev *hdev)
+static int btusb_submit_intr_urb(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hdev->driver_data;
 	struct urb *urb;
@@ -122,6 +237,9 @@ static inline int btusb_submit_intr_urb(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	if (!data->intr_ep)
+		return -ENODEV;
+
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb)
 		return -ENOMEM;
@@ -170,6 +288,8 @@ static void btusb_bulk_complete(struct urb *urb)
 		return;
 
 	if (urb->status == 0) {
+		hdev->stat.byte_rx += urb->actual_length;
+
 		if (hci_recv_fragment(hdev, HCI_ACLDATA_PKT,
 						urb->transfer_buffer,
 						urb->actual_length) < 0) {
@@ -191,7 +311,7 @@ static void btusb_bulk_complete(struct urb *urb)
 	}
 }
 
-static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
+static int btusb_submit_bulk_urb(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hdev->driver_data;
 	struct urb *urb;
@@ -201,6 +321,9 @@ static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	if (!data->bulk_rx_ep)
+		return -ENODEV;
+
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!urb)
 		return -ENOMEM;
@@ -235,6 +358,127 @@ static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
 	return err;
 }
 
+static void btusb_isoc_complete(struct urb *urb)
+{
+	struct hci_dev *hdev = urb->context;
+	struct btusb_data *data = hdev->driver_data;
+	int i, err;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name,
+					urb, urb->status, urb->actual_length);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return;
+
+	if (urb->status == 0) {
+		for (i = 0; i < urb->number_of_packets; i++) {
+			unsigned int offset = urb->iso_frame_desc[i].offset;
+			unsigned int length = urb->iso_frame_desc[i].actual_length;
+
+			if (urb->iso_frame_desc[i].status)
+				continue;
+
+			hdev->stat.byte_rx += length;
+
+			if (hci_recv_fragment(hdev, HCI_SCODATA_PKT,
+						urb->transfer_buffer + offset,
+								length) < 0) {
+				BT_ERR("%s corrupted SCO packet", hdev->name);
+				hdev->stat.err_rx++;
+			}
+		}
+	}
+
+	if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
+		return;
+
+	usb_anchor_urb(urb, &data->isoc_anchor);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0) {
+		BT_ERR("%s urb %p failed to resubmit (%d)",
+						hdev->name, urb, -err);
+		usb_unanchor_urb(urb);
+	}
+}
+
+static void inline __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
+{
+	int i, offset = 0;
+
+	BT_DBG("len %d mtu %d", len, mtu);
+
+	for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
+					i++, offset += mtu, len -= mtu) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = mtu;
+	}
+
+	if (len && i < BTUSB_MAX_ISOC_FRAMES) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = len;
+		i++;
+	}
+
+	urb->number_of_packets = i;
+}
+
+static int btusb_submit_isoc_urb(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hdev->driver_data;
+	struct urb *urb;
+	unsigned char *buf;
+	unsigned int pipe;
+	int err, size;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!data->isoc_rx_ep)
+		return -ENODEV;
+
+	urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
+						BTUSB_MAX_ISOC_FRAMES;
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
+
+	urb->dev      = data->udev;
+	urb->pipe     = pipe;
+	urb->context  = hdev;
+	urb->complete = btusb_isoc_complete;
+	urb->interval = data->isoc_rx_ep->bInterval;
+
+	urb->transfer_flags  = URB_FREE_BUFFER | URB_ISO_ASAP;
+	urb->transfer_buffer = buf;
+	urb->transfer_buffer_length = size;
+
+	__fill_isoc_descriptor(urb, size,
+			le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
+
+	usb_anchor_urb(urb, &data->isoc_anchor);
+
+	err = usb_submit_urb(urb, GFP_KERNEL);
+	if (err < 0) {
+		BT_ERR("%s urb %p submission failed (%d)",
+						hdev->name, urb, -err);
+		usb_unanchor_urb(urb);
+		kfree(buf);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
 static void btusb_tx_complete(struct urb *urb)
 {
 	struct sk_buff *skb = urb->context;
@@ -288,6 +532,9 @@ static int btusb_close(struct hci_dev *hdev)
 	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
 		return 0;
 
+	clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+	usb_kill_anchored_urbs(&data->intr_anchor);
+
 	clear_bit(BTUSB_BULK_RUNNING, &data->flags);
 	usb_kill_anchored_urbs(&data->bulk_anchor);
 
@@ -349,6 +596,9 @@ static int btusb_send_frame(struct sk_buff *skb)
 		break;
 
 	case HCI_ACLDATA_PKT:
+		if (!data->bulk_tx_ep || hdev->conn_hash.acl_num < 1)
+			return -ENODEV;
+
 		urb = usb_alloc_urb(0, GFP_ATOMIC);
 		if (!urb)
 			return -ENOMEM;
@@ -363,9 +613,31 @@ static int btusb_send_frame(struct sk_buff *skb)
 		break;
 
 	case HCI_SCODATA_PKT:
+		if (!data->isoc_tx_ep || hdev->conn_hash.sco_num < 1)
+			return -ENODEV;
+
+		urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC);
+		if (!urb)
+			return -ENOMEM;
+
+		pipe = usb_sndisocpipe(data->udev,
+					data->isoc_tx_ep->bEndpointAddress);
+
+		urb->dev      = data->udev;
+		urb->pipe     = pipe;
+		urb->context  = skb;
+		urb->complete = btusb_tx_complete;
+		urb->interval = data->isoc_tx_ep->bInterval;
+
+		urb->transfer_flags  = URB_ISO_ASAP;
+		urb->transfer_buffer = skb->data;
+		urb->transfer_buffer_length = skb->len;
+
+		__fill_isoc_descriptor(urb, skb->len,
+				le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
+
 		hdev->stat.sco_tx++;
-		kfree_skb(skb);
-		return 0;
+		break;
 
 	default:
 		return -EILSEQ;
@@ -404,22 +676,86 @@ static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
 		schedule_work(&data->work);
 }
 
+static int inline __set_isoc_interface(struct hci_dev *hdev, int altsetting)
+{
+	struct btusb_data *data = hdev->driver_data;
+	struct usb_interface *intf = data->isoc;
+	struct usb_endpoint_descriptor *ep_desc;
+	int i, err;
+
+	if (!data->isoc)
+		return -ENODEV;
+
+	err = usb_set_interface(data->udev, 1, altsetting);
+	if (err < 0) {
+		BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
+		return err;
+	}
+
+	data->isoc_altsetting = altsetting;
+
+	data->isoc_tx_ep = NULL;
+	data->isoc_rx_ep = NULL;
+
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		ep_desc = &intf->cur_altsetting->endpoint[i].desc;
+
+		if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
+			data->isoc_tx_ep = ep_desc;
+			continue;
+		}
+
+		if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
+			data->isoc_rx_ep = ep_desc;
+			continue;
+		}
+	}
+
+	if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
+		BT_ERR("%s invalid SCO descriptors", hdev->name);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static void btusb_work(struct work_struct *work)
 {
 	struct btusb_data *data = container_of(work, struct btusb_data, work);
 	struct hci_dev *hdev = data->hdev;
 
-	if (hdev->conn_hash.acl_num == 0) {
+	if (hdev->conn_hash.acl_num > 0) {
+		if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
+			if (btusb_submit_bulk_urb(hdev) < 0)
+				clear_bit(BTUSB_BULK_RUNNING, &data->flags);
+			else
+				btusb_submit_bulk_urb(hdev);
+		}
+	} else {
 		clear_bit(BTUSB_BULK_RUNNING, &data->flags);
 		usb_kill_anchored_urbs(&data->bulk_anchor);
-		return;
 	}
 
-	if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
-		if (btusb_submit_bulk_urb(hdev) < 0)
-			clear_bit(BTUSB_BULK_RUNNING, &data->flags);
-		else
-			btusb_submit_bulk_urb(hdev);
+	if (hdev->conn_hash.sco_num > 0) {
+		if (data->isoc_altsetting != 2) {
+			clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+			usb_kill_anchored_urbs(&data->isoc_anchor);
+
+			if (__set_isoc_interface(hdev, 2) < 0)
+				return;
+		}
+
+		if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
+			if (btusb_submit_isoc_urb(hdev) < 0)
+				clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+			else
+				btusb_submit_isoc_urb(hdev);
+		}
+	} else {
+		clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+		usb_kill_anchored_urbs(&data->isoc_anchor);
+
+		__set_isoc_interface(hdev, 0);
 	}
 }
 
@@ -433,6 +769,7 @@ static int btusb_probe(struct usb_interface *intf,
 
 	BT_DBG("intf %p id %p", intf, id);
 
+	/* interface numbers are hardcoded in the spec */
 	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 		return -ENODEV;
 
@@ -443,6 +780,18 @@ static int btusb_probe(struct usb_interface *intf,
 			id = match;
 	}
 
+	if (id->driver_info == BTUSB_IGNORE)
+		return -ENODEV;
+
+	if (ignore_dga && id->driver_info & BTUSB_DIGIANSWER)
+		return -ENODEV;
+
+	if (ignore_csr && id->driver_info & BTUSB_CSR)
+		return -ENODEV;
+
+	if (ignore_sniffer && id->driver_info & BTUSB_SNIFFER)
+		return -ENODEV;
+
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -480,6 +829,7 @@ static int btusb_probe(struct usb_interface *intf,
 	init_usb_anchor(&data->tx_anchor);
 	init_usb_anchor(&data->intr_anchor);
 	init_usb_anchor(&data->bulk_anchor);
+	init_usb_anchor(&data->isoc_anchor);
 
 	hdev = hci_alloc_dev();
 	if (!hdev) {
@@ -503,7 +853,49 @@ static int btusb_probe(struct usb_interface *intf,
 
 	hdev->owner = THIS_MODULE;
 
-	set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
+	/* interface numbers are hardcoded in the spec */
+	data->isoc = usb_ifnum_to_if(data->udev, 1);
+
+	if (reset || id->driver_info & BTUSB_RESET)
+		set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
+
+	if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
+		if (!disable_scofix)
+			set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
+	}
+
+	if (id->driver_info & BTUSB_BROKEN_ISOC)
+		data->isoc = NULL;
+
+	if (id->driver_info & BTUSB_SNIFFER) {
+		struct usb_device *udev = data->udev;
+
+		if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
+			set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+		data->isoc = NULL;
+	}
+
+	if (id->driver_info & BTUSB_BCM92035) {
+		unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 };
+		struct sk_buff *skb;
+
+		skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
+		if (skb) {
+			memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
+			skb_queue_tail(&hdev->driver_init, skb);
+		}
+	}
+
+	if (data->isoc) {
+		err = usb_driver_claim_interface(&btusb_driver,
+							data->isoc, NULL);
+		if (err < 0) {
+			hci_free_dev(hdev);
+			kfree(data);
+			return err;
+		}
+	}
 
 	err = hci_register_dev(hdev);
 	if (err < 0) {
@@ -529,6 +921,9 @@ static void btusb_disconnect(struct usb_interface *intf)
 
 	hdev = data->hdev;
 
+	if (data->isoc)
+		usb_driver_release_interface(&btusb_driver, data->isoc);
+
 	usb_set_intfdata(intf, NULL);
 
 	hci_unregister_dev(hdev);
@@ -558,6 +953,24 @@ static void __exit btusb_exit(void)
 module_init(btusb_init);
 module_exit(btusb_exit);
 
+module_param(ignore_dga, bool, 0644);
+MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001");
+
+module_param(ignore_csr, bool, 0644);
+MODULE_PARM_DESC(ignore_csr, "Ignore devices with id 0a12:0001");
+
+module_param(ignore_sniffer, bool, 0644);
+MODULE_PARM_DESC(ignore_sniffer, "Ignore devices with id 0a12:0002");
+
+module_param(disable_scofix, bool, 0644);
+MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
+
+module_param(force_scofix, bool, 0644);
+MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
+
+module_param(reset, bool, 0644);
+MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
+
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 69df187d74c..8dfcf77cb71 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -577,7 +577,7 @@ module_exit(hci_uart_exit);
 module_param(reset, bool, 0644);
 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
index 192522ebb77..3c453924f83 100644
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -62,7 +62,6 @@
 #define URB_ZERO_PACKET 0
 #endif
 
-static int ignore;
 static int ignore_dga;
 static int ignore_csr;
 static int ignore_sniffer;
@@ -74,7 +73,7 @@ static int reset;
 static int isoc = 2;
 #endif
 
-#define VERSION "2.9"
+#define VERSION "2.10"
 
 static struct usb_driver hci_usb_driver; 
 
@@ -134,6 +133,13 @@ static struct usb_device_id blacklist_ids[] = {
 
 	/* Dell laptop with Broadcom chip */
 	{ USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+	/* Dell Wireless 370 */
+	{ USB_DEVICE(0x413c, 0x8156), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+	/* Dell Wireless 410 */
+	{ USB_DEVICE(0x413c, 0x8152), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+	/* Broadcom 2046 */
+	{ USB_DEVICE(0x0a5c, 0x2151), .driver_info = HCI_RESET },
 
 	/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
 	{ USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET },
@@ -794,7 +800,7 @@ static int hci_usb_probe(struct usb_interface *intf, const struct usb_device_id
 			id = match;
 	}
 
-	if (ignore || id->driver_info & HCI_IGNORE)
+	if (id->driver_info & HCI_IGNORE)
 		return -ENODEV;
 
 	if (ignore_dga && id->driver_info & HCI_DIGIANSWER)
@@ -1101,9 +1107,6 @@ static void __exit hci_usb_exit(void)
 module_init(hci_usb_init);
 module_exit(hci_usb_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 module_param(ignore_dga, bool, 0644);
 MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001");
 
@@ -1127,7 +1130,7 @@ module_param(isoc, int, 0644);
 MODULE_PARM_DESC(isoc, "Set isochronous transfers for SCO over HCI support");
 #endif
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth HCI USB driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index d97700aa54a..7320a71b636 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -377,7 +377,7 @@ module_exit(vhci_exit);
 module_param(minor, int, 0444);
 MODULE_PARM_DESC(minor, "Miscellaneous minor device number");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth virtual HCI driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index a5da3563265..74031de517e 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -408,7 +408,6 @@ int register_cdrom(struct cdrom_device_info *cdi)
 	ENSURE(get_last_session, CDC_MULTI_SESSION);
 	ENSURE(get_mcn, CDC_MCN);
 	ENSURE(reset, CDC_RESET);
-	ENSURE(audio_ioctl, CDC_PLAY_AUDIO);
 	ENSURE(generic_packet, CDC_GENERIC_PACKET);
 	cdi->mc_flags = 0;
 	cdo->n_minors = 0;
@@ -1436,10 +1435,6 @@ static void cdrom_count_tracks(struct cdrom_device_info *cdi, tracktype* tracks)
 	tracks->xa=0;
 	tracks->error=0;
 	cdinfo(CD_COUNT_TRACKS, "entering cdrom_count_tracks\n"); 
-        if (!CDROM_CAN(CDC_PLAY_AUDIO)) { 
-                tracks->error=CDS_NO_INFO;
-                return;
-        }        
 	/* Grab the TOC header so we can see how many tracks there are */
 	if ((ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCHDR, &header))) {
 		if (ret == -ENOMEDIUM)
@@ -2510,8 +2505,6 @@ static int cdrom_ioctl_get_subchnl(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL,"entering CDROMSUBCHNL\n");*/
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&q, argp, sizeof(q)))
 		return -EFAULT;
 
@@ -2542,8 +2535,6 @@ static int cdrom_ioctl_read_tochdr(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCHDR\n"); */
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&header, argp, sizeof(header)))
 		return -EFAULT;
 
@@ -2566,8 +2557,6 @@ static int cdrom_ioctl_read_tocentry(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCENTRY\n"); */
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&entry, argp, sizeof(entry)))
 		return -EFAULT;
 
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 71ec426ecff..1231d95aa69 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -39,8 +39,8 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/delay.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
 
 #define GDROM_DEV_NAME "gdrom"
 #define GD_SESSION_OFFSET 150
@@ -471,6 +471,12 @@ cleanup_sense_final:
 	return err;
 }
 
+static int gdrom_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+			     void *arg)
+{
+	return -EINVAL;
+}
+
 static struct cdrom_device_ops gdrom_ops = {
 	.open			= gdrom_open,
 	.release		= gdrom_release,
@@ -478,6 +484,7 @@ static struct cdrom_device_ops gdrom_ops = {
 	.media_changed		= gdrom_mediachanged,
 	.get_last_session	= gdrom_get_last_session,
 	.reset			= gdrom_hardreset,
+	.audio_ioctl		= gdrom_audio_ioctl,
 	.capability		= CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
 				  CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R,
 	.n_minors		= 1,
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 9d0dfe6e0d6..031e0e1a1a3 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -550,12 +550,19 @@ return_complete:
 	}
 }
 
+static int viocd_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+			     void *arg)
+{
+	return -EINVAL;
+}
+
 static struct cdrom_device_ops viocd_dops = {
 	.open = viocd_open,
 	.release = viocd_release,
 	.media_changed = viocd_media_changed,
 	.lock_door = viocd_lock_door,
 	.generic_packet = viocd_packet,
+	.audio_ioctl = viocd_audio_ioctl,
 	.capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_GENERIC_PACKET | CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_RAM
 };
 
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index d0ac944e169..caff85149b9 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -8,7 +8,7 @@ config VT
 	bool "Virtual terminal" if EMBEDDED
 	depends on !S390
 	select INPUT
-	default y if !VIOCONS
+	default y
 	---help---
 	  If you say Y here, you will get support for terminal devices with
 	  display and keyboard devices. These are called "virtual" because you
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 8a161c30e1d..6850f6da757 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -55,7 +55,6 @@ obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o
 obj-$(CONFIG_MMTIMER)		+= mmtimer.o
-obj-$(CONFIG_VIOCONS)		+= viocons.o
 obj-$(CONFIG_VIOTAPE)		+= viotape.o
 obj-$(CONFIG_HVCS)		+= hvcs.o
 obj-$(CONFIG_IBM_BSR)		+= bsr.o
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index 81e14bea54b..4bada0e8b81 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -148,6 +148,9 @@ struct agp_bridge_data {
 	char minor_version;
 	struct list_head list;
 	u32 apbase_config;
+	/* list of agp_memory mapped to the aperture */
+	struct list_head mapped_list;
+	spinlock_t mapped_lock;
 };
 
 #define KB(x)	((x) * 1024)
diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c
index 1ffb381130c..31dcd9142d5 100644
--- a/drivers/char/agp/ali-agp.c
+++ b/drivers/char/agp/ali-agp.c
@@ -110,7 +110,8 @@ static int ali_configure(void)
 
 		nlvm_addr+= agp_bridge->gart_bus_addr;
 		nlvm_addr|=(agp_bridge->gart_bus_addr>>12);
-		printk(KERN_INFO PFX "nlvm top &base = %8x\n",nlvm_addr);
+		dev_info(&agp_bridge->dev->dev, "nlvm top &base = %8x\n",
+			 nlvm_addr);
 	}
 #endif
 
@@ -315,8 +316,8 @@ static int __devinit agp_ali_probe(struct pci_dev *pdev,
 			goto found;
 	}
 
-	printk(KERN_ERR PFX "Unsupported ALi chipset (device id: %04x)\n",
-	     pdev->device);
+	dev_err(&pdev->dev, "unsupported ALi chipset [%04x/%04x])\n",
+		pdev->vendor, pdev->device);
 	return -ENODEV;
 
 
@@ -361,8 +362,7 @@ found:
 		bridge->driver = &ali_generic_bridge;
 	}
 
-	printk(KERN_INFO PFX "Detected ALi %s chipset\n",
-			devs[j].chipset_name);
+	dev_info(&pdev->dev, "ALi %s chipset\n", devs[j].chipset_name);
 
 	/* Fill in the mode register */
 	pci_read_config_dword(pdev,
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 39a0718bc61..e280531843b 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -419,8 +419,8 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 		return -ENODEV;
 
 	j = ent - agp_amdk7_pci_table;
-	printk(KERN_INFO PFX "Detected AMD %s chipset\n",
-	       amd_agp_device_ids[j].chipset_name);
+	dev_info(&pdev->dev, "AMD %s chipset\n",
+		 amd_agp_device_ids[j].chipset_name);
 
 	bridge = agp_alloc_bridge();
 	if (!bridge)
@@ -442,7 +442,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 		while (!cap_ptr) {
 			gfxcard = pci_get_class(PCI_CLASS_DISPLAY_VGA<<8, gfxcard);
 			if (!gfxcard) {
-				printk (KERN_INFO PFX "Couldn't find an AGP VGA controller.\n");
+				dev_info(&pdev->dev, "no AGP VGA controller\n");
 				return -ENODEV;
 			}
 			cap_ptr = pci_find_capability(gfxcard, PCI_CAP_ID_AGP);
@@ -453,7 +453,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 		   (if necessary at all). */
 		if (gfxcard->vendor == PCI_VENDOR_ID_NVIDIA) {
 			agp_bridge->flags |= AGP_ERRATA_1X;
-			printk (KERN_INFO PFX "AMD 751 chipset with NVidia GeForce detected. Forcing to 1X due to errata.\n");
+			dev_info(&pdev->dev, "AMD 751 chipset with NVidia GeForce; forcing 1X due to errata\n");
 		}
 		pci_dev_put(gfxcard);
 	}
@@ -469,7 +469,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 			agp_bridge->flags = AGP_ERRATA_FASTWRITES;
 			agp_bridge->flags |= AGP_ERRATA_SBA;
 			agp_bridge->flags |= AGP_ERRATA_1X;
-			printk (KERN_INFO PFX "AMD 761 chipset with errata detected - disabling AGP fast writes & SBA and forcing to 1X.\n");
+			dev_info(&pdev->dev, "AMD 761 chipset with errata; disabling AGP fast writes & SBA and forcing to 1X\n");
 		}
 	}
 
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 481ffe87c71..7495c522d8e 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -34,6 +34,7 @@
 
 static struct resource *aperture_resource;
 static int __initdata agp_try_unsupported = 1;
+static int agp_bridges_found;
 
 static void amd64_tlbflush(struct agp_memory *temp)
 {
@@ -293,12 +294,13 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
 	 * so let double check that order, and lets trust the AMD NB settings
 	 */
 	if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) {
-		printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n",
-				  32 << order);
+		dev_info(&agp->dev, "aperture size %u MB is not right, using settings from NB\n",
+			 32 << order);
 		order = nb_order;
 	}
 
-	printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order);
+	dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
+		 aper, 32 << order);
 	if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
 		return -1;
 
@@ -319,10 +321,10 @@ static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr)
 	for (i = 0; i < num_k8_northbridges; i++) {
 		struct pci_dev *dev = k8_northbridges[i];
 		if (fix_northbridge(dev, pdev, cap_ptr) < 0) {
-			printk(KERN_ERR PFX "No usable aperture found.\n");
+			dev_err(&dev->dev, "no usable aperture found\n");
 #ifdef __x86_64__
 			/* should port this to i386 */
-			printk(KERN_ERR PFX "Consider rebooting with iommu=memaper=2 to get a good aperture.\n");
+			dev_err(&dev->dev, "consider rebooting with iommu=memaper=2 to get a good aperture\n");
 #endif
 			return -1;
 		}
@@ -345,14 +347,14 @@ static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data
 	default:   revstring="??"; break;
 	}
 
-	printk (KERN_INFO PFX "Detected AMD 8151 AGP Bridge rev %s\n", revstring);
+	dev_info(&pdev->dev, "AMD 8151 AGP Bridge rev %s\n", revstring);
 
 	/*
 	 * Work around errata.
 	 * Chips before B2 stepping incorrectly reporting v3.5
 	 */
 	if (pdev->revision < 0x13) {
-		printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
+		dev_info(&pdev->dev, "correcting AGP revision (reports 3.5, is really 3.0)\n");
 		bridge->major_version = 3;
 		bridge->minor_version = 0;
 	}
@@ -375,11 +377,11 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
 	struct pci_dev *dev1;
 	int i;
 	unsigned size = amd64_fetch_size();
-	printk(KERN_INFO "Setting up ULi AGP.\n");
+
+	dev_info(&pdev->dev, "setting up ULi AGP\n");
 	dev1 = pci_get_slot (pdev->bus,PCI_DEVFN(0,0));
 	if (dev1 == NULL) {
-		printk(KERN_INFO PFX "Detected a ULi chipset, "
-			"but could not fine the secondary device.\n");
+		dev_info(&pdev->dev, "can't find ULi secondary device\n");
 		return -ENODEV;
 	}
 
@@ -388,7 +390,7 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
 			break;
 
 	if (i == ARRAY_SIZE(uli_sizes)) {
-		printk(KERN_INFO PFX "No ULi size found for %d\n", size);
+		dev_info(&pdev->dev, "no ULi size found for %d\n", size);
 		return -ENODEV;
 	}
 
@@ -433,13 +435,11 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 	int i;
 	unsigned size = amd64_fetch_size();
 
-	printk(KERN_INFO PFX "Setting up Nforce3 AGP.\n");
+	dev_info(&pdev->dev, "setting up Nforce3 AGP\n");
 
 	dev1 = pci_get_slot(pdev->bus, PCI_DEVFN(11, 0));
 	if (dev1 == NULL) {
-		printk(KERN_INFO PFX "agpgart: Detected an NVIDIA "
-			"nForce3 chipset, but could not find "
-			"the secondary device.\n");
+		dev_info(&pdev->dev, "can't find Nforce3 secondary device\n");
 		return -ENODEV;
 	}
 
@@ -448,7 +448,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 			break;
 
 	if (i == ARRAY_SIZE(nforce3_sizes)) {
-		printk(KERN_INFO PFX "No NForce3 size found for %d\n", size);
+		dev_info(&pdev->dev, "no NForce3 size found for %d\n", size);
 		return -ENODEV;
 	}
 
@@ -462,7 +462,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 
 	/* if x86-64 aperture base is beyond 4G, exit here */
 	if ( (apbase & 0x7fff) >> (32 - 25) ) {
-		printk(KERN_INFO PFX "aperture base > 4G\n");
+		dev_info(&pdev->dev, "aperture base > 4G\n");
 		return -ENODEV;
 	}
 
@@ -489,6 +489,7 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
 {
 	struct agp_bridge_data *bridge;
 	u8 cap_ptr;
+	int err;
 
 	cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
 	if (!cap_ptr)
@@ -504,7 +505,8 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
 	    pdev->device == PCI_DEVICE_ID_AMD_8151_0) {
 		amd8151_init(pdev, bridge);
 	} else {
-		printk(KERN_INFO PFX "Detected AGP bridge %x\n", pdev->devfn);
+		dev_info(&pdev->dev, "AGP bridge [%04x/%04x]\n",
+			 pdev->vendor, pdev->device);
 	}
 
 	bridge->driver = &amd_8151_driver;
@@ -536,7 +538,12 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
 	}
 
 	pci_set_drvdata(pdev, bridge);
-	return agp_add_bridge(bridge);
+	err = agp_add_bridge(bridge);
+	if (err < 0)
+		return err;
+
+	agp_bridges_found++;
+	return 0;
 }
 
 static void __devexit agp_amd64_remove(struct pci_dev *pdev)
@@ -713,7 +720,11 @@ int __init agp_amd64_init(void)
 
 	if (agp_off)
 		return -EINVAL;
-	if (pci_register_driver(&agp_amd64_pci_driver) < 0) {
+	err = pci_register_driver(&agp_amd64_pci_driver);
+	if (err < 0)
+		return err;
+
+	if (agp_bridges_found == 0) {
 		struct pci_dev *dev;
 		if (!agp_try_unsupported && !agp_try_unsupported_boot) {
 			printk(KERN_INFO PFX "No supported AGP bridge found.\n");
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 3a4566c0d84..6ecbcafb34b 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -486,8 +486,8 @@ static int __devinit agp_ati_probe(struct pci_dev *pdev,
 			goto found;
 	}
 
-	printk(KERN_ERR PFX
-	     "Unsupported Ati chipset (device id: %04x)\n", pdev->device);
+	dev_err(&pdev->dev, "unsupported Ati chipset [%04x/%04x])\n",
+		pdev->vendor, pdev->device);
 	return -ENODEV;
 
 found:
@@ -500,8 +500,7 @@ found:
 
 	bridge->driver = &ati_generic_bridge;
 
-	printk(KERN_INFO PFX "Detected Ati %s chipset\n",
-			devs[j].chipset_name);
+	dev_info(&pdev->dev, "Ati %s chipset\n", devs[j].chipset_name);
 
 	/* Fill in the mode register */
 	pci_read_config_dword(pdev,
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index 1ec87104e68..3a3cc03d401 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -144,7 +144,8 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 		void *addr = bridge->driver->agp_alloc_page(bridge);
 
 		if (!addr) {
-			printk(KERN_ERR PFX "unable to get memory for scratch page.\n");
+			dev_err(&bridge->dev->dev,
+				"can't get memory for scratch page\n");
 			return -ENOMEM;
 		}
 
@@ -155,13 +156,13 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 
 	size_value = bridge->driver->fetch_size();
 	if (size_value == 0) {
-		printk(KERN_ERR PFX "unable to determine aperture size.\n");
+		dev_err(&bridge->dev->dev, "can't determine aperture size\n");
 		rc = -EINVAL;
 		goto err_out;
 	}
 	if (bridge->driver->create_gatt_table(bridge)) {
-		printk(KERN_ERR PFX
-		    "unable to get memory for graphics translation table.\n");
+		dev_err(&bridge->dev->dev,
+			"can't get memory for graphics translation table\n");
 		rc = -ENOMEM;
 		goto err_out;
 	}
@@ -169,7 +170,8 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 
 	bridge->key_list = vmalloc(PAGE_SIZE * 4);
 	if (bridge->key_list == NULL) {
-		printk(KERN_ERR PFX "error allocating memory for key lists.\n");
+		dev_err(&bridge->dev->dev,
+			"can't allocate memory for key lists\n");
 		rc = -ENOMEM;
 		goto err_out;
 	}
@@ -179,10 +181,12 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 	memset(bridge->key_list, 0, PAGE_SIZE * 4);
 
 	if (bridge->driver->configure()) {
-		printk(KERN_ERR PFX "error configuring host chipset.\n");
+		dev_err(&bridge->dev->dev, "error configuring host chipset\n");
 		rc = -EINVAL;
 		goto err_out;
 	}
+	INIT_LIST_HEAD(&bridge->mapped_list);
+	spin_lock_init(&bridge->mapped_lock);
 
 	return 0;
 
@@ -269,25 +273,27 @@ int agp_add_bridge(struct agp_bridge_data *bridge)
 
 	/* Grab reference on the chipset driver. */
 	if (!try_module_get(bridge->driver->owner)) {
-		printk (KERN_INFO PFX "Couldn't lock chipset driver.\n");
+		dev_info(&bridge->dev->dev, "can't lock chipset driver\n");
 		return -EINVAL;
 	}
 
 	error = agp_backend_initialize(bridge);
 	if (error) {
-		printk (KERN_INFO PFX "agp_backend_initialize() failed.\n");
+		dev_info(&bridge->dev->dev,
+			 "agp_backend_initialize() failed\n");
 		goto err_out;
 	}
 
 	if (list_empty(&agp_bridges)) {
 		error = agp_frontend_initialize();
 		if (error) {
-			printk (KERN_INFO PFX "agp_frontend_initialize() failed.\n");
+			dev_info(&bridge->dev->dev,
+				 "agp_frontend_initialize() failed\n");
 			goto frontend_err;
 		}
 
-		printk(KERN_INFO PFX "AGP aperture is %dM @ 0x%lx\n",
-			bridge->driver->fetch_size(), bridge->gart_bus_addr);
+		dev_info(&bridge->dev->dev, "AGP aperture is %dM @ 0x%lx\n",
+			 bridge->driver->fetch_size(), bridge->gart_bus_addr);
 
 	}
 
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index eaa1a355bb3..118dbde25dc 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -429,6 +429,10 @@ int agp_bind_memory(struct agp_memory *curr, off_t pg_start)
 
 	curr->is_bound = true;
 	curr->pg_start = pg_start;
+	spin_lock(&agp_bridge->mapped_lock);
+	list_add(&curr->mapped_list, &agp_bridge->mapped_list);
+	spin_unlock(&agp_bridge->mapped_lock);
+
 	return 0;
 }
 EXPORT_SYMBOL(agp_bind_memory);
@@ -461,10 +465,34 @@ int agp_unbind_memory(struct agp_memory *curr)
 
 	curr->is_bound = false;
 	curr->pg_start = 0;
+	spin_lock(&curr->bridge->mapped_lock);
+	list_del(&curr->mapped_list);
+	spin_unlock(&curr->bridge->mapped_lock);
 	return 0;
 }
 EXPORT_SYMBOL(agp_unbind_memory);
 
+/**
+ *	agp_rebind_emmory  -  Rewrite the entire GATT, useful on resume
+ */
+int agp_rebind_memory(void)
+{
+	struct agp_memory *curr;
+	int ret_val = 0;
+
+	spin_lock(&agp_bridge->mapped_lock);
+	list_for_each_entry(curr, &agp_bridge->mapped_list, mapped_list) {
+		ret_val = curr->bridge->driver->insert_memory(curr,
+							      curr->pg_start,
+							      curr->type);
+		if (ret_val != 0)
+			break;
+	}
+	spin_unlock(&agp_bridge->mapped_lock);
+	return ret_val;
+}
+EXPORT_SYMBOL(agp_rebind_memory);
+
 /* End - Routines for handling swapping of agp_memory into the GATT */
 
 
@@ -771,8 +799,8 @@ void agp_device_command(u32 bridge_agpstat, bool agp_v3)
 		if (!agp)
 			continue;
 
-		printk(KERN_INFO PFX "Putting AGP V%d device at %s into %dx mode\n",
-				agp_v3 ? 3 : 2, pci_name(device), mode);
+		dev_info(&device->dev, "putting AGP V%d device into %dx mode\n",
+			 agp_v3 ? 3 : 2, mode);
 		pci_write_config_dword(device, agp + PCI_AGP_COMMAND, bridge_agpstat);
 	}
 }
@@ -800,10 +828,8 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
 
 	get_agp_version(agp_bridge);
 
-	printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
-				agp_bridge->major_version,
-				agp_bridge->minor_version,
-				pci_name(agp_bridge->dev));
+	dev_info(&agp_bridge->dev->dev, "AGP %d.%d bridge\n",
+		 agp_bridge->major_version, agp_bridge->minor_version);
 
 	pci_read_config_dword(agp_bridge->dev,
 		      agp_bridge->capndx + PCI_AGP_STATUS, &bridge_agpstat);
@@ -832,8 +858,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
 		    pci_write_config_dword(bridge->dev,
 					bridge->capndx+AGPCTRL, temp);
 
-		    printk(KERN_INFO PFX "Device is in legacy mode,"
-				" falling back to 2.x\n");
+		    dev_info(&bridge->dev->dev, "bridge is in legacy mode, falling back to 2.x\n");
 		}
 	}
 
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index df702642ab8..016fdf0623a 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -32,8 +32,8 @@
 #define PCI_DEVICE_ID_INTEL_Q35_IG          0x29B2
 #define PCI_DEVICE_ID_INTEL_Q33_HB          0x29D0
 #define PCI_DEVICE_ID_INTEL_Q33_IG          0x29D2
-#define PCI_DEVICE_ID_INTEL_IGD_HB          0x2A40
-#define PCI_DEVICE_ID_INTEL_IGD_IG          0x2A42
+#define PCI_DEVICE_ID_INTEL_GM45_HB         0x2A40
+#define PCI_DEVICE_ID_INTEL_GM45_IG         0x2A42
 #define PCI_DEVICE_ID_INTEL_IGD_E_HB        0x2E00
 #define PCI_DEVICE_ID_INTEL_IGD_E_IG        0x2E02
 #define PCI_DEVICE_ID_INTEL_Q45_HB          0x2E10
@@ -55,7 +55,7 @@
 		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_HB || \
 		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GM_HB || \
 		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GME_HB || \
-		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB)
+		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB)
 
 #define IS_G33 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G33_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \
@@ -161,7 +161,7 @@ static int intel_i810_fetch_size(void)
 	values = A_SIZE_FIX(agp_bridge->driver->aperture_sizes);
 
 	if ((smram_miscc & I810_GMS) == I810_GMS_DISABLE) {
-		printk(KERN_WARNING PFX "i810 is disabled\n");
+		dev_warn(&agp_bridge->dev->dev, "i810 is disabled\n");
 		return 0;
 	}
 	if ((smram_miscc & I810_GFX_MEM_WIN_SIZE) == I810_GFX_MEM_WIN_32M) {
@@ -193,7 +193,8 @@ static int intel_i810_configure(void)
 
 		intel_private.registers = ioremap(temp, 128 * 4096);
 		if (!intel_private.registers) {
-			printk(KERN_ERR PFX "Unable to remap memory.\n");
+			dev_err(&intel_private.pcidev->dev,
+				"can't remap memory\n");
 			return -ENOMEM;
 		}
 	}
@@ -201,7 +202,8 @@ static int intel_i810_configure(void)
 	if ((readl(intel_private.registers+I810_DRAM_CTL)
 		& I810_DRAM_ROW_0) == I810_DRAM_ROW_0_SDRAM) {
 		/* This will need to be dynamically assigned */
-		printk(KERN_INFO PFX "detected 4MB dedicated video ram.\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "detected 4MB dedicated video ram\n");
 		intel_private.num_dcache_entries = 1024;
 	}
 	pci_read_config_dword(intel_private.pcidev, I810_GMADDR, &temp);
@@ -500,8 +502,8 @@ static void intel_i830_init_gtt_entries(void)
 			size = 1024 + 512;
 			break;
 		default:
-			printk(KERN_INFO PFX "Unknown page table size, "
-			       "assuming 512KB\n");
+			dev_info(&intel_private.pcidev->dev,
+				 "unknown page table size, assuming 512KB\n");
 			size = 512;
 		}
 		size += 4; /* add in BIOS popup space */
@@ -515,8 +517,8 @@ static void intel_i830_init_gtt_entries(void)
 			size = 2048;
 			break;
 		default:
-			printk(KERN_INFO PFX "Unknown page table size 0x%x, "
-				"assuming 512KB\n",
+			dev_info(&agp_bridge->dev->dev,
+				 "unknown page table size 0x%x, assuming 512KB\n",
 				(gmch_ctrl & G33_PGETBL_SIZE_MASK));
 			size = 512;
 		}
@@ -627,11 +629,11 @@ static void intel_i830_init_gtt_entries(void)
 		}
 	}
 	if (gtt_entries > 0)
-		printk(KERN_INFO PFX "Detected %dK %s memory.\n",
+		dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
 		       gtt_entries / KB(1), local ? "local" : "stolen");
 	else
-		printk(KERN_INFO PFX
-		       "No pre-allocated video memory detected.\n");
+		dev_info(&agp_bridge->dev->dev,
+		       "no pre-allocated video memory detected\n");
 	gtt_entries /= KB(4);
 
 	intel_private.gtt_entries = gtt_entries;
@@ -801,10 +803,12 @@ static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start,
 	num_entries = A_SIZE_FIX(temp)->num_entries;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n",
-				pg_start, intel_private.gtt_entries);
+		dev_printk(KERN_DEBUG, &intel_private.pcidev->dev,
+			   "pg_start == 0x%.8lx, intel_private.gtt_entries == 0x%.8x\n",
+			   pg_start, intel_private.gtt_entries);
 
-		printk(KERN_INFO PFX "Trying to insert into local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to insert into local/stolen memory\n");
 		goto out_err;
 	}
 
@@ -851,7 +855,8 @@ static int intel_i830_remove_entries(struct agp_memory *mem, off_t pg_start,
 		return 0;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_INFO PFX "Trying to disable local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to disable local/stolen memory\n");
 		return -EINVAL;
 	}
 
@@ -957,7 +962,7 @@ static void intel_i9xx_setup_flush(void)
 	if (intel_private.ifp_resource.start) {
 		intel_private.i9xx_flush_page = ioremap_nocache(intel_private.ifp_resource.start, PAGE_SIZE);
 		if (!intel_private.i9xx_flush_page)
-			printk(KERN_INFO "unable to ioremap flush  page - no chipset flushing");
+			dev_info(&intel_private.pcidev->dev, "can't ioremap flush page - no chipset flushing");
 	}
 }
 
@@ -1028,10 +1033,12 @@ static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start,
 	num_entries = A_SIZE_FIX(temp)->num_entries;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n",
-				pg_start, intel_private.gtt_entries);
+		dev_printk(KERN_DEBUG, &intel_private.pcidev->dev,
+			   "pg_start == 0x%.8lx, intel_private.gtt_entries == 0x%.8x\n",
+			   pg_start, intel_private.gtt_entries);
 
-		printk(KERN_INFO PFX "Trying to insert into local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to insert into local/stolen memory\n");
 		goto out_err;
 	}
 
@@ -1078,7 +1085,8 @@ static int intel_i915_remove_entries(struct agp_memory *mem, off_t pg_start,
 		return 0;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_INFO PFX "Trying to disable local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to disable local/stolen memory\n");
 		return -EINVAL;
 	}
 
@@ -1182,7 +1190,7 @@ static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge,
 static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
 {
 	switch (agp_bridge->dev->device) {
-	case PCI_DEVICE_ID_INTEL_IGD_HB:
+	case PCI_DEVICE_ID_INTEL_GM45_HB:
 	case PCI_DEVICE_ID_INTEL_IGD_E_HB:
 	case PCI_DEVICE_ID_INTEL_Q45_HB:
 	case PCI_DEVICE_ID_INTEL_G45_HB:
@@ -1379,7 +1387,7 @@ static int intel_815_configure(void)
 	/* the Intel 815 chipset spec. says that bits 29-31 in the
 	* ATTBASE register are reserved -> try not to write them */
 	if (agp_bridge->gatt_bus_addr & INTEL_815_ATTBASE_MASK) {
-		printk(KERN_EMERG PFX "gatt bus addr too high");
+		dev_emerg(&agp_bridge->dev->dev, "gatt bus addr too high");
 		return -EINVAL;
 	}
 
@@ -2117,8 +2125,8 @@ static const struct intel_driver_description {
 		NULL, &intel_g33_driver },
 	{ PCI_DEVICE_ID_INTEL_Q33_HB, PCI_DEVICE_ID_INTEL_Q33_IG, 0, "Q33",
 		NULL, &intel_g33_driver },
-	{ PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0,
-	    "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
+	{ PCI_DEVICE_ID_INTEL_GM45_HB, PCI_DEVICE_ID_INTEL_GM45_IG, 0,
+	    "Mobile Intel? GM45 Express", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0,
 	    "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0,
@@ -2163,8 +2171,8 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 
 	if (intel_agp_chipsets[i].name == NULL) {
 		if (cap_ptr)
-			printk(KERN_WARNING PFX "Unsupported Intel chipset"
-			       "(device id: %04x)\n", pdev->device);
+			dev_warn(&pdev->dev, "unsupported Intel chipset [%04x/%04x]\n",
+				 pdev->vendor, pdev->device);
 		agp_put_bridge(bridge);
 		return -ENODEV;
 	}
@@ -2172,9 +2180,8 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	if (bridge->driver == NULL) {
 		/* bridge has no AGP and no IGD detected */
 		if (cap_ptr)
-			printk(KERN_WARNING PFX "Failed to find bridge device "
-				"(chip_id: %04x)\n",
-				intel_agp_chipsets[i].gmch_chip_id);
+			dev_warn(&pdev->dev, "can't find bridge device (chip_id: %04x)\n",
+				 intel_agp_chipsets[i].gmch_chip_id);
 		agp_put_bridge(bridge);
 		return -ENODEV;
 	}
@@ -2183,8 +2190,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	bridge->capndx = cap_ptr;
 	bridge->dev_private_data = &intel_private;
 
-	printk(KERN_INFO PFX "Detected an Intel %s Chipset.\n",
-		intel_agp_chipsets[i].name);
+	dev_info(&pdev->dev, "Intel %s Chipset\n", intel_agp_chipsets[i].name);
 
 	/*
 	* The following fixes the case where the BIOS has "forgotten" to
@@ -2194,7 +2200,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	r = &pdev->resource[0];
 	if (!r->start && r->end) {
 		if (pci_assign_resource(pdev, 0)) {
-			printk(KERN_ERR PFX "could not assign resource 0\n");
+			dev_err(&pdev->dev, "can't assign resource 0\n");
 			agp_put_bridge(bridge);
 			return -ENODEV;
 		}
@@ -2206,7 +2212,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	* 20030610 - hamish@zot.org
 	*/
 	if (pci_enable_device(pdev)) {
-		printk(KERN_ERR PFX "Unable to Enable PCI device\n");
+		dev_err(&pdev->dev, "can't enable PCI device\n");
 		agp_put_bridge(bridge);
 		return -ENODEV;
 	}
@@ -2238,6 +2244,7 @@ static void __devexit agp_intel_remove(struct pci_dev *pdev)
 static int agp_intel_resume(struct pci_dev *pdev)
 {
 	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
+	int ret_val;
 
 	pci_restore_state(pdev);
 
@@ -2265,6 +2272,10 @@ static int agp_intel_resume(struct pci_dev *pdev)
 	else if (bridge->driver == &intel_i965_driver)
 		intel_i915_configure();
 
+	ret_val = agp_rebind_memory();
+	if (ret_val != 0)
+		return ret_val;
+
 	return 0;
 }
 #endif
@@ -2315,7 +2326,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
 	ID(PCI_DEVICE_ID_INTEL_G33_HB),
 	ID(PCI_DEVICE_ID_INTEL_Q35_HB),
 	ID(PCI_DEVICE_ID_INTEL_Q33_HB),
-	ID(PCI_DEVICE_ID_INTEL_IGD_HB),
+	ID(PCI_DEVICE_ID_INTEL_GM45_HB),
 	ID(PCI_DEVICE_ID_INTEL_IGD_E_HB),
 	ID(PCI_DEVICE_ID_INTEL_Q45_HB),
 	ID(PCI_DEVICE_ID_INTEL_G45_HB),
diff --git a/drivers/char/agp/isoch.c b/drivers/char/agp/isoch.c
index 3f9ccde6237..c73385cc4b8 100644
--- a/drivers/char/agp/isoch.c
+++ b/drivers/char/agp/isoch.c
@@ -153,7 +153,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 
 	/* Check if this configuration has any chance of working */
 	if (tot_bw > target.maxbw) {
-		printk(KERN_ERR PFX "isochronous bandwidth required "
+		dev_err(&td->dev, "isochronous bandwidth required "
 			"by AGP 3.0 devices exceeds that which is supported by "
 			"the AGP 3.0 bridge!\n");
 		ret = -ENODEV;
@@ -188,7 +188,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 	/* Exit if the minimal ISOCH_N allocation among the masters is more
 	 * than the target can handle. */
 	if (tot_n > target.n) {
-		printk(KERN_ERR PFX "number of isochronous "
+		dev_err(&td->dev, "number of isochronous "
 			"transactions per period required by AGP 3.0 devices "
 			"exceeds that which is supported by the AGP 3.0 "
 			"bridge!\n");
@@ -229,7 +229,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 	/* Exit if the minimal RQ needs of the masters exceeds what the target
 	 * can provide. */
 	if (tot_rq > rq_isoch) {
-		printk(KERN_ERR PFX "number of request queue slots "
+		dev_err(&td->dev, "number of request queue slots "
 			"required by the isochronous bandwidth requested by "
 			"AGP 3.0 devices exceeds the number provided by the "
 			"AGP 3.0 bridge!\n");
@@ -359,8 +359,9 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 			case 0x0001:    /* Unclassified device */
 				/* Don't know what this is, but log it for investigation. */
 				if (mcapndx != 0) {
-					printk (KERN_INFO PFX "Wacky, found unclassified AGP device. %x:%x\n",
-						dev->vendor, dev->device);
+					dev_info(&td->dev, "wacky, found unclassified AGP device %s [%04x/%04x]\n",
+						 pci_name(dev),
+						 dev->vendor, dev->device);
 				}
 				continue;
 
@@ -407,17 +408,18 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 		}
 
 		if (mcapndx == 0) {
-			printk(KERN_ERR PFX "woah!  Non-AGP device "
-				"found on the secondary bus of an AGP 3.5 bridge!\n");
+			dev_err(&td->dev, "woah!  Non-AGP device %s on "
+				"secondary bus of AGP 3.5 bridge!\n",
+				pci_name(dev));
 			ret = -ENODEV;
 			goto free_and_exit;
 		}
 
 		mmajor = (ncapid >> AGP_MAJOR_VERSION_SHIFT) & 0xf;
 		if (mmajor < 3) {
-			printk(KERN_ERR PFX "woah!  AGP 2.0 device "
-				"found on the secondary bus of an AGP 3.5 "
-				"bridge operating with AGP 3.0 electricals!\n");
+			dev_err(&td->dev, "woah!  AGP 2.0 device %s on "
+				"secondary bus of AGP 3.5 bridge operating "
+				"with AGP 3.0 electricals!\n", pci_name(dev));
 			ret = -ENODEV;
 			goto free_and_exit;
 		}
@@ -427,10 +429,10 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 		pci_read_config_dword(dev, cur->capndx+AGPSTAT, &mstatus);
 
 		if (((mstatus >> 3) & 0x1) == 0) {
-			printk(KERN_ERR PFX "woah!  AGP 3.x device "
-				"not operating in AGP 3.x mode found on the "
-				"secondary bus of an AGP 3.5 bridge operating "
-				"with AGP 3.0 electricals!\n");
+			dev_err(&td->dev, "woah!  AGP 3.x device %s not "
+				"operating in AGP 3.x mode on secondary bus "
+				"of AGP 3.5 bridge operating with AGP 3.0 "
+				"electricals!\n", pci_name(dev));
 			ret = -ENODEV;
 			goto free_and_exit;
 		}
@@ -444,9 +446,9 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 	if (isoch) {
 		ret = agp_3_5_isochronous_node_enable(bridge, dev_list, ndevs);
 		if (ret) {
-			printk(KERN_INFO PFX "Something bad happened setting "
-			       "up isochronous xfers.  Falling back to "
-			       "non-isochronous xfer mode.\n");
+			dev_info(&td->dev, "something bad happened setting "
+				 "up isochronous xfers; falling back to "
+				 "non-isochronous xfer mode\n");
 		} else {
 			goto free_and_exit;
 		}
@@ -466,4 +468,3 @@ free_and_exit:
 get_out:
 	return ret;
 }
-
diff --git a/drivers/char/agp/sis-agp.c b/drivers/char/agp/sis-agp.c
index b6791846809..2587ef96a96 100644
--- a/drivers/char/agp/sis-agp.c
+++ b/drivers/char/agp/sis-agp.c
@@ -79,10 +79,8 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
 	u32 command;
 	int rate;
 
-	printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
-		agp_bridge->major_version,
-		agp_bridge->minor_version,
-		pci_name(agp_bridge->dev));
+	dev_info(&agp_bridge->dev->dev, "AGP %d.%d bridge\n",
+		 agp_bridge->major_version, agp_bridge->minor_version);
 
 	pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx + PCI_AGP_STATUS, &command);
 	command = agp_collect_device_status(bridge, mode, command);
@@ -94,8 +92,8 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
 		if (!agp)
 			continue;
 
-		printk(KERN_INFO PFX "Putting AGP V3 device at %s into %dx mode\n",
-			pci_name(device), rate);
+		dev_info(&agp_bridge->dev->dev, "putting AGP V3 device at %s into %dx mode\n",
+			 pci_name(device), rate);
 
 		pci_write_config_dword(device, agp + PCI_AGP_COMMAND, command);
 
@@ -105,7 +103,7 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
 		 * cannot be configured
 		 */
 		if (device->device == bridge->dev->device) {
-			printk(KERN_INFO PFX "SiS delay workaround: giving bridge time to recover.\n");
+			dev_info(&agp_bridge->dev->dev, "SiS delay workaround: giving bridge time to recover\n");
 			msleep(10);
 		}
 	}
@@ -190,7 +188,8 @@ static int __devinit agp_sis_probe(struct pci_dev *pdev,
 		return -ENODEV;
 
 
-	printk(KERN_INFO PFX "Detected SiS chipset - id:%i\n", pdev->device);
+	dev_info(&pdev->dev, "SiS chipset [%04x/%04x]\n",
+		 pdev->vendor, pdev->device);
 	bridge = agp_alloc_bridge();
 	if (!bridge)
 		return -ENOMEM;
@@ -242,7 +241,7 @@ static struct pci_device_id agp_sis_pci_table[] = {
 		.class		= (PCI_CLASS_BRIDGE_HOST << 8),
 		.class_mask	= ~0,
 		.vendor		= PCI_VENDOR_ID_SI,
-		.device		= PCI_DEVICE_ID_SI_5591_AGP,
+		.device		= PCI_DEVICE_ID_SI_5591,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
 	},
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index 0e054c13449..2fb27fe4c10 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -241,7 +241,8 @@ static void serverworks_tlbflush(struct agp_memory *temp)
 	while (readb(serverworks_private.registers+SVWRKS_POSTFLUSH) == 1) {
 		cpu_relax();
 		if (time_after(jiffies, timeout)) {
-			printk(KERN_ERR PFX "TLB post flush took more than 3 seconds\n");
+			dev_err(&serverworks_private.svrwrks_dev->dev,
+				"TLB post flush took more than 3 seconds\n");
 			break;
 		}
 	}
@@ -251,7 +252,8 @@ static void serverworks_tlbflush(struct agp_memory *temp)
 	while (readl(serverworks_private.registers+SVWRKS_DIRFLUSH) == 1) {
 		cpu_relax();
 		if (time_after(jiffies, timeout)) {
-			printk(KERN_ERR PFX "TLB Dir flush took more than 3 seconds\n");
+			dev_err(&serverworks_private.svrwrks_dev->dev,
+				"TLB Dir flush took more than 3 seconds\n");
 			break;
 		}
 	}
@@ -271,7 +273,7 @@ static int serverworks_configure(void)
 	temp = (temp & PCI_BASE_ADDRESS_MEM_MASK);
 	serverworks_private.registers = (volatile u8 __iomem *) ioremap(temp, 4096);
 	if (!serverworks_private.registers) {
-		printk (KERN_ERR PFX "Unable to ioremap() memory.\n");
+		dev_err(&agp_bridge->dev->dev, "can't ioremap(%#x)\n", temp);
 		return -ENOMEM;
 	}
 
@@ -451,7 +453,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 
 	switch (pdev->device) {
 	case 0x0006:
-		printk (KERN_ERR PFX "ServerWorks CNB20HE is unsupported due to lack of documentation.\n");
+		dev_err(&pdev->dev, "ServerWorks CNB20HE is unsupported due to lack of documentation\n");
 		return -ENODEV;
 
 	case PCI_DEVICE_ID_SERVERWORKS_HE:
@@ -461,8 +463,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 
 	default:
 		if (cap_ptr)
-			printk(KERN_ERR PFX "Unsupported Serverworks chipset "
-					"(device id: %04x)\n", pdev->device);
+			dev_err(&pdev->dev, "unsupported Serverworks chipset "
+				"[%04x/%04x]\n", pdev->vendor, pdev->device);
 		return -ENODEV;
 	}
 
@@ -470,8 +472,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 	bridge_dev = pci_get_bus_and_slot((unsigned int)pdev->bus->number,
 			PCI_DEVFN(0, 1));
 	if (!bridge_dev) {
-		printk(KERN_INFO PFX "Detected a Serverworks chipset "
-		       "but could not find the secondary device.\n");
+		dev_info(&pdev->dev, "can't find secondary device\n");
 		return -ENODEV;
 	}
 
@@ -482,8 +483,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 	if (temp & PCI_BASE_ADDRESS_MEM_TYPE_64) {
 		pci_read_config_dword(pdev, SVWRKS_APSIZE + 4, &temp2);
 		if (temp2 != 0) {
-			printk(KERN_INFO PFX "Detected 64 bit aperture address, "
-			       "but top bits are not zero.  Disabling agp\n");
+			dev_info(&pdev->dev, "64 bit aperture address, "
+				 "but top bits are not zero; disabling AGP\n");
 			return -ENODEV;
 		}
 		serverworks_private.mm_addr_ofs = 0x18;
@@ -495,8 +496,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 		pci_read_config_dword(pdev,
 				serverworks_private.mm_addr_ofs + 4, &temp2);
 		if (temp2 != 0) {
-			printk(KERN_INFO PFX "Detected 64 bit MMIO address, "
-			       "but top bits are not zero.  Disabling agp\n");
+			dev_info(&pdev->dev, "64 bit MMIO address, but top "
+				 "bits are not zero; disabling AGP\n");
 			return -ENODEV;
 		}
 	}
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index d2fa3cfca02..eef72709ec5 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -46,8 +46,8 @@ static int uninorth_fetch_size(void)
 				break;
 
 		if (i == agp_bridge->driver->num_aperture_sizes) {
-			printk(KERN_ERR PFX "Invalid aperture size, using"
-			       " default\n");
+			dev_err(&agp_bridge->dev->dev, "invalid aperture size, "
+				"using default\n");
 			size = 0;
 			aperture = NULL;
 		}
@@ -108,8 +108,8 @@ static int uninorth_configure(void)
 
 	current_size = A_SIZE_32(agp_bridge->current_size);
 
-	printk(KERN_INFO PFX "configuring for size idx: %d\n",
-	       current_size->size_value);
+	dev_info(&agp_bridge->dev->dev, "configuring for size idx: %d\n",
+		 current_size->size_value);
 
 	/* aperture size and gatt addr */
 	pci_write_config_dword(agp_bridge->dev,
@@ -197,8 +197,9 @@ static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
 	gp = (u32 *) &agp_bridge->gatt_table[pg_start];
 	for (i = 0; i < mem->page_count; ++i) {
 		if (gp[i]) {
-			printk("u3_insert_memory: entry 0x%x occupied (%x)\n",
-			       i, gp[i]);
+			dev_info(&agp_bridge->dev->dev,
+				 "u3_insert_memory: entry 0x%x occupied (%x)\n",
+				 i, gp[i]);
 			return -EBUSY;
 		}
 	}
@@ -276,8 +277,8 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
 				       &scratch);
 	} while ((scratch & PCI_AGP_COMMAND_AGP) == 0 && ++timeout < 1000);
 	if ((scratch & PCI_AGP_COMMAND_AGP) == 0)
-		printk(KERN_ERR PFX "failed to write UniNorth AGP"
-		       " command register\n");
+		dev_err(&bridge->dev->dev, "can't write UniNorth AGP "
+			"command register\n");
 
 	if (uninorth_rev >= 0x30) {
 		/* This is an AGP V3 */
@@ -330,8 +331,8 @@ static int agp_uninorth_suspend(struct pci_dev *pdev)
 		pci_read_config_dword(device, agp + PCI_AGP_COMMAND, &cmd);
 		if (!(cmd & PCI_AGP_COMMAND_AGP))
 			continue;
-		printk("uninorth-agp: disabling AGP on device %s\n",
-				pci_name(device));
+		dev_info(&pdev->dev, "disabling AGP on device %s\n",
+			 pci_name(device));
 		cmd &= ~PCI_AGP_COMMAND_AGP;
 		pci_write_config_dword(device, agp + PCI_AGP_COMMAND, cmd);
 	}
@@ -341,8 +342,7 @@ static int agp_uninorth_suspend(struct pci_dev *pdev)
 	pci_read_config_dword(pdev, agp + PCI_AGP_COMMAND, &cmd);
 	bridge->dev_private_data = (void *)(long)cmd;
 	if (cmd & PCI_AGP_COMMAND_AGP) {
-		printk("uninorth-agp: disabling AGP on bridge %s\n",
-				pci_name(pdev));
+		dev_info(&pdev->dev, "disabling AGP on bridge\n");
 		cmd &= ~PCI_AGP_COMMAND_AGP;
 		pci_write_config_dword(pdev, agp + PCI_AGP_COMMAND, cmd);
 	}
@@ -591,14 +591,14 @@ static int __devinit agp_uninorth_probe(struct pci_dev *pdev,
 	/* probe for known chipsets */
 	for (j = 0; devs[j].chipset_name != NULL; ++j) {
 		if (pdev->device == devs[j].device_id) {
-			printk(KERN_INFO PFX "Detected Apple %s chipset\n",
-			       devs[j].chipset_name);
+			dev_info(&pdev->dev, "Apple %s chipset\n",
+				 devs[j].chipset_name);
 			goto found;
 		}
 	}
 
-	printk(KERN_ERR PFX "Unsupported Apple chipset (device id: %04x).\n",
-		pdev->device);
+	dev_err(&pdev->dev, "unsupported Apple chipset [%04x/%04x]\n",
+		pdev->vendor, pdev->device);
 	return -ENODEV;
 
  found:
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 3530ff417a5..6e763e3f5a8 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1254,7 +1254,7 @@ static int rs_break(struct tty_struct *tty, int break_state)
 	unsigned long flags;
 
 	if (serial_paranoia_check(info, tty->name, "rs_break"))
-		return;
+		return -EINVAL;
 
 	local_irq_save(flags);
 	if (break_state == -1)
diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c
index 34275c6f1da..74e9cd81b5b 100644
--- a/drivers/char/ds1620.c
+++ b/drivers/char/ds1620.c
@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/smp_lock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/uaccess.h>
 #include <asm/therm.h>
diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
index 67fbd7aab5d..34d15d54823 100644
--- a/drivers/char/efirtc.c
+++ b/drivers/char/efirtc.c
@@ -37,7 +37,6 @@
 #include <linux/rtc.h>
 #include <linux/proc_fs.h>
 #include <linux/efi.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 
 #include <asm/system.h>
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 02aac104842..fd64137b1ab 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -322,11 +322,10 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 
 	hp->tty = tty;
 
-	if (hp->ops->notifier_add)
-		rc = hp->ops->notifier_add(hp, hp->data);
-
 	spin_unlock_irqrestore(&hp->lock, flags);
 
+	if (hp->ops->notifier_add)
+		rc = hp->ops->notifier_add(hp, hp->data);
 
 	/*
 	 * If the notifier fails we return an error.  The tty layer
diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h
index d9ce1091562..9790201718a 100644
--- a/drivers/char/hvc_console.h
+++ b/drivers/char/hvc_console.h
@@ -6,7 +6,7 @@
  * 	Ryan S. Arnold <rsa@us.ibm.com>
  *
  * hvc_console header information:
- *      moved here from include/asm-powerpc/hvconsole.h
+ *      moved here from arch/powerpc/include/asm/hvconsole.h
  *      and drivers/char/hvc_console.c
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 786d518e947..473d9b14439 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -114,7 +114,7 @@
  * the hvcs_final_close() function in order to get it out of the spinlock.
  * Rearranged hvcs_close().  Cleaned up some printks and did some housekeeping
  * on the changelog.  Removed local CLC_LENGTH and used HVCS_CLC_LENGTH from
- * include/asm-powerpc/hvcserver.h 
+ * arch/powerepc/include/asm/hvcserver.h
  *
  * 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to
  * prevent possible lockup with realtime scheduling as similarily pointed out by
diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c
index bab43ca32ac..263567f5f39 100644
--- a/drivers/char/hw_random/ixp4xx-rng.c
+++ b/drivers/char/hw_random/ixp4xx-rng.c
@@ -23,7 +23,7 @@
 #include <linux/hw_random.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 static int ixp4xx_rng_data_read(struct hwrng *rng, u32 *buffer)
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index f7feae4ebb5..128202e18fc 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -31,6 +31,7 @@
 #include <asm/io.h>
 #include <asm/msr.h>
 #include <asm/cpufeature.h>
+#include <asm/i387.h>
 
 
 #define PFX	KBUILD_MODNAME ": "
@@ -67,16 +68,23 @@ enum {
  * Another possible performance boost may come from simply buffering
  * until we have 4 bytes, thus returning a u32 at a time,
  * instead of the current u8-at-a-time.
+ *
+ * Padlock instructions can generate a spurious DNA fault, so
+ * we have to call them in the context of irq_ts_save/restore()
  */
 
 static inline u32 xstore(u32 *addr, u32 edx_in)
 {
 	u32 eax_out;
+	int ts_state;
+
+	ts_state = irq_ts_save();
 
 	asm(".byte 0x0F,0xA7,0xC0 /* xstore %%edi (addr=%0) */"
 		:"=m"(*addr), "=a"(eax_out)
 		:"D"(addr), "d"(edx_in));
 
+	irq_ts_restore(ts_state);
 	return eax_out;
 }
 
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 192688344ed..8e8afb6141f 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -66,8 +66,8 @@
 #include <linux/ctype.h>
 
 #ifdef CONFIG_PPC_OF
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
 #endif
 
 #define PFX "ipmi_si: "
@@ -2695,15 +2695,13 @@ static __devinit void default_find_bmc(void)
 	for (i = 0; ; i++) {
 		if (!ipmi_defaults[i].port)
 			break;
-
-		info = kzalloc(sizeof(*info), GFP_KERNEL);
-		if (!info)
-			return;
-
 #ifdef CONFIG_PPC_MERGE
 		if (check_legacy_ioport(ipmi_defaults[i].port))
 			continue;
 #endif
+		info = kzalloc(sizeof(*info), GFP_KERNEL);
+		if (!info)
+			return;
 
 		info->addr_source = NULL;
 
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index e30575e8764..b638403e8e9 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1612,8 +1612,10 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
 	switch (cmd) {
 	case MOXA_GET_MAJOR:
-		printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl %x, fix "
-				"your userspace\n", current->comm, cmd);
+		if (printk_ratelimit())
+			printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
+					"%x (GET_MAJOR), fix your userspace\n",
+					current->comm, cmd);
 		return put_user(ttymajor, (int __user *)argp);
 
 	case MOXA_CHKPORTENABLE:
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index b1414507997..3a23e7694d5 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -29,7 +29,6 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/uaccess.h>
-#include <linux/version.h>
 
 #include "tty.h"
 #include "network.h"
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index d1fceabe3ae..c240562c218 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -232,7 +232,6 @@ typedef struct _mgslpc_info {
 
 	/* SPPP/Cisco HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
@@ -459,13 +458,11 @@ static int ttymajor=0;
 
 static int debug_level = 0;
 static int maxframe[MAX_DEVICE_COUNT] = {0,};
-static int dosyncppp[MAX_DEVICE_COUNT] = {1,1,1,1};
 
 module_param(break_on_load, bool, 0);
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 MODULE_LICENSE("GPL");
 
@@ -2915,7 +2912,6 @@ static void mgslpc_add_device(MGSLPC_INFO *info)
 	if (info->line < MAX_DEVICE_COUNT) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	mgslpc_device_count++;
diff --git a/drivers/char/random.c b/drivers/char/random.c
index e0d0e371909..7ce1ac4baa6 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -407,7 +407,7 @@ struct entropy_store {
 	/* read-write data: */
 	spinlock_t lock;
 	unsigned add_ptr;
-	int entropy_count;
+	int entropy_count;	/* Must at no time exceed ->POOLBITS! */
 	int input_rotate;
 };
 
@@ -520,6 +520,7 @@ static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes)
 static void credit_entropy_bits(struct entropy_store *r, int nbits)
 {
 	unsigned long flags;
+	int entropy_count;
 
 	if (!nbits)
 		return;
@@ -527,20 +528,20 @@ static void credit_entropy_bits(struct entropy_store *r, int nbits)
 	spin_lock_irqsave(&r->lock, flags);
 
 	DEBUG_ENT("added %d entropy credits to %s\n", nbits, r->name);
-	r->entropy_count += nbits;
-	if (r->entropy_count < 0) {
+	entropy_count = r->entropy_count;
+	entropy_count += nbits;
+	if (entropy_count < 0) {
 		DEBUG_ENT("negative entropy/overflow\n");
-		r->entropy_count = 0;
-	} else if (r->entropy_count > r->poolinfo->POOLBITS)
-		r->entropy_count = r->poolinfo->POOLBITS;
+		entropy_count = 0;
+	} else if (entropy_count > r->poolinfo->POOLBITS)
+		entropy_count = r->poolinfo->POOLBITS;
+	r->entropy_count = entropy_count;
 
 	/* should we wake readers? */
-	if (r == &input_pool &&
-	    r->entropy_count >= random_read_wakeup_thresh) {
+	if (r == &input_pool && entropy_count >= random_read_wakeup_thresh) {
 		wake_up_interruptible(&random_read_wait);
 		kill_fasync(&fasync, SIGIO, POLL_IN);
 	}
-
 	spin_unlock_irqrestore(&r->lock, flags);
 }
 
@@ -1571,6 +1572,7 @@ u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
 
 	return half_md4_transform(hash, keyptr->secret);
 }
+EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index d9799e2bcfb..f53d4d00faf 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -78,7 +78,6 @@
 #include <linux/wait.h>
 #include <linux/bcd.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 
 #include <asm/current.h>
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index ef6706f0906..500f5176b6b 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -304,7 +304,6 @@ struct mgsl_struct {
 
 	/* generic HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
@@ -868,7 +867,6 @@ static int irq[MAX_ISA_DEVICES];
 static int dma[MAX_ISA_DEVICES];
 static int debug_level;
 static int maxframe[MAX_TOTAL_DEVICES];
-static int dosyncppp[MAX_TOTAL_DEVICES];
 static int txdmabufs[MAX_TOTAL_DEVICES];
 static int txholdbufs[MAX_TOTAL_DEVICES];
 	
@@ -879,7 +877,6 @@ module_param_array(irq, int, NULL, 0);
 module_param_array(dma, int, NULL, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 module_param_array(txdmabufs, int, NULL, 0);
 module_param_array(txholdbufs, int, NULL, 0);
 
@@ -4258,7 +4255,6 @@ static void mgsl_add_device( struct mgsl_struct *info )
 	if (info->line < MAX_TOTAL_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 
 		if (txdmabufs[info->line]) {
 			info->num_tx_dma_buffers = txdmabufs[info->line];
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 3e9058993e4..08911ed6649 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -47,7 +47,6 @@
 
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
@@ -128,17 +127,14 @@ static int slgt_device_count;
 static int ttymajor;
 static int debug_level;
 static int maxframe[MAX_DEVICES];
-static int dosyncppp[MAX_DEVICES];
 
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
-MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable");
 
 /*
  * tty support and callbacks
@@ -349,7 +345,6 @@ struct slgt_info {
 	/* SPPP/Cisco HDLC device parts */
 
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 #if SYNCLINK_GENERIC_HDLC
 	struct net_device *netdev;
@@ -3405,7 +3400,6 @@ static void add_device(struct slgt_info *info)
 	if (info->line < MAX_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	slgt_device_count++;
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index c0490cbd0db..6bdb44f7bec 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -270,7 +270,6 @@ typedef struct _synclinkmp_info {
 
 	/* SPPP/Cisco HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
@@ -469,13 +468,11 @@ static int ttymajor = 0;
  */
 static int debug_level = 0;
 static int maxframe[MAX_DEVICES] = {0,};
-static int dosyncppp[MAX_DEVICES] = {0,};
 
 module_param(break_on_load, bool, 0);
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 static char *driver_name = "SyncLink MultiPort driver";
 static char *driver_version = "$Revision: 4.38 $";
@@ -3752,7 +3749,6 @@ static void add_device(SLMP_INFO *info)
 	if (info->line < MAX_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	synclinkmp_device_count++;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e1b46bc7e43..daeb8f76697 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1161,8 +1161,8 @@ void disassociate_ctty(int on_exit)
 	tty = get_current_tty();
 	if (tty) {
 		tty_pgrp = get_pid(tty->pgrp);
-		mutex_unlock(&tty_mutex);
 		lock_kernel();
+		mutex_unlock(&tty_mutex);
 		/* XXX: here we race, there is nothing protecting tty */
 		if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
 			tty_vhangup(tty);
@@ -2496,45 +2496,26 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
 }
 
 /**
- *	tiocswinsz		-	implement window size set ioctl
- *	@tty; tty
- *	@arg: user buffer for result
- *
- *	Copies the user idea of the window size to the kernel. Traditionally
- *	this is just advisory information but for the Linux console it
- *	actually has driver level meaning and triggers a VC resize.
+ *	tty_do_resize		-	resize event
+ *	@tty: tty being resized
+ *	@real_tty: real tty (not the same as tty if using a pty/tty pair)
+ *	@rows: rows (character)
+ *	@cols: cols (character)
  *
- *	Locking:
- *		Called function use the console_sem is used to ensure we do
- *	not try and resize the console twice at once.
- *		The tty->termios_mutex is used to ensure we don't double
- *	resize and get confused. Lock order - tty->termios_mutex before
- *	console sem
+ *	Update the termios variables and send the neccessary signals to
+ *	peform a terminal resize correctly
  */
 
-static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
-	struct winsize __user *arg)
+int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+					struct winsize *ws)
 {
-	struct winsize tmp_ws;
 	struct pid *pgrp, *rpgrp;
 	unsigned long flags;
 
-	if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
-		return -EFAULT;
-
-	mutex_lock(&tty->termios_mutex);
-	if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
+	/* For a PTY we need to lock the tty side */
+	mutex_lock(&real_tty->termios_mutex);
+	if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
 		goto done;
-
-#ifdef CONFIG_VT
-	if (tty->driver->type == TTY_DRIVER_TYPE_CONSOLE) {
-		if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col,
-					tmp_ws.ws_row)) {
-			mutex_unlock(&tty->termios_mutex);
-			return -ENXIO;
-		}
-	}
-#endif
 	/* Get the PID values and reference them so we can
 	   avoid holding the tty ctrl lock while sending signals */
 	spin_lock_irqsave(&tty->ctrl_lock, flags);
@@ -2550,14 +2531,42 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
 	put_pid(pgrp);
 	put_pid(rpgrp);
 
-	tty->winsize = tmp_ws;
-	real_tty->winsize = tmp_ws;
+	tty->winsize = *ws;
+	real_tty->winsize = *ws;
 done:
-	mutex_unlock(&tty->termios_mutex);
+	mutex_unlock(&real_tty->termios_mutex);
 	return 0;
 }
 
 /**
+ *	tiocswinsz		-	implement window size set ioctl
+ *	@tty; tty
+ *	@arg: user buffer for result
+ *
+ *	Copies the user idea of the window size to the kernel. Traditionally
+ *	this is just advisory information but for the Linux console it
+ *	actually has driver level meaning and triggers a VC resize.
+ *
+ *	Locking:
+ *		Driver dependant. The default do_resize method takes the
+ *	tty termios mutex and ctrl_lock. The console takes its own lock
+ *	then calls into the default method.
+ */
+
+static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
+	struct winsize __user *arg)
+{
+	struct winsize tmp_ws;
+	if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
+		return -EFAULT;
+
+	if (tty->ops->resize)
+		return tty->ops->resize(tty, real_tty, &tmp_ws);
+	else
+		return tty_do_resize(tty, real_tty, &tmp_ws);
+}
+
+/**
  *	tioccons	-	allow admin to move logical console
  *	@file: the file to become console
  *
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index ea9fc5d03b9..bf34e459742 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -937,12 +937,14 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 			return 0;
 #endif
 	case TIOCGSOFTCAR:
-		return put_user(C_CLOCAL(tty) ? 1 : 0,
+		/* FIXME: for correctness we may need to take the termios
+		   lock here - review */
+		return put_user(C_CLOCAL(real_tty) ? 1 : 0,
 						(int __user *)arg);
 	case TIOCSSOFTCAR:
 		if (get_user(arg, (unsigned int __user *) arg))
 			return -EFAULT;
-		return tty_change_softcar(tty, arg);
+		return tty_change_softcar(real_tty, arg);
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 241cbdea65a..f307f135cbf 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -169,7 +169,7 @@ static int tty_ldisc_get(int disc, struct tty_ldisc *ld)
 	if (disc < N_TTY || disc >= NR_LDISCS)
 		return -EINVAL;
 	err = tty_ldisc_try_get(disc, ld);
-	if (err == -EAGAIN) {
+	if (err < 0) {
 		request_module("tty-ldisc-%d", disc);
 		err = tty_ldisc_try_get(disc, ld);
 	}
diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c
deleted file mode 100644
index 65fb848e1cc..00000000000
--- a/drivers/char/viocons.c
+++ /dev/null
@@ -1,1171 +0,0 @@
-/* -*- linux-c -*-
- *
- *  drivers/char/viocons.c
- *
- *  iSeries Virtual Terminal
- *
- *  Authors: Dave Boutcher <boutcher@us.ibm.com>
- *           Ryan Arnold <ryanarn@us.ibm.com>
- *           Colin Devilbiss <devilbis@us.ibm.com>
- *           Stephen Rothwell
- *
- * (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation
- *
- * This program is free software;  you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) anyu later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/errno.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <asm/ioctls.h>
-#include <linux/kd.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/sysrq.h>
-
-#include <asm/firmware.h>
-#include <asm/iseries/vio.h>
-#include <asm/iseries/hv_lp_event.h>
-#include <asm/iseries/hv_call_event.h>
-#include <asm/iseries/hv_lp_config.h>
-#include <asm/iseries/hv_call.h>
-
-#ifdef CONFIG_VT
-#error You must turn off CONFIG_VT to use CONFIG_VIOCONS
-#endif
-
-#define VIOTTY_MAGIC (0x0DCB)
-#define VTTY_PORTS 10
-
-#define VIOCONS_KERN_WARN	KERN_WARNING "viocons: "
-#define VIOCONS_KERN_INFO	KERN_INFO "viocons: "
-
-static DEFINE_SPINLOCK(consolelock);
-static DEFINE_SPINLOCK(consoleloglock);
-
-static int vio_sysrq_pressed;
-
-#define VIOCHAR_NUM_BUF		16
-
-/*
- * Our port information.  We store a pointer to one entry in the
- * tty_driver_data
- */
-static struct port_info {
-	int magic;
-	struct tty_struct *tty;
-	HvLpIndex lp;
-	u8 vcons;
-	u64 seq;	/* sequence number of last HV send */
-	u64 ack;	/* last ack from HV */
-/*
- * When we get writes faster than we can send it to the partition,
- * buffer the data here. Note that used is a bit map of used buffers.
- * It had better have enough bits to hold VIOCHAR_NUM_BUF the bitops assume
- * it is a multiple of unsigned long
- */
-	unsigned long used;
-	u8 *buffer[VIOCHAR_NUM_BUF];
-	int bufferBytes[VIOCHAR_NUM_BUF];
-	int curbuf;
-	int bufferOverflow;
-	int overflowMessage;
-} port_info[VTTY_PORTS];
-
-#define viochar_is_console(pi)	((pi) == &port_info[0])
-#define viochar_port(pi)	((pi) - &port_info[0])
-
-static void initDataEvent(struct viocharlpevent *viochar, HvLpIndex lp);
-
-static struct tty_driver *viotty_driver;
-
-static void hvlog(char *fmt, ...)
-{
-	int i;
-	unsigned long flags;
-	va_list args;
-	static char buf[256];
-
-	spin_lock_irqsave(&consoleloglock, flags);
-	va_start(args, fmt);
-	i = vscnprintf(buf, sizeof(buf) - 1, fmt, args);
-	va_end(args);
-	buf[i++] = '\r';
-	HvCall_writeLogBuffer(buf, i);
-	spin_unlock_irqrestore(&consoleloglock, flags);
-}
-
-static void hvlogOutput(const char *buf, int count)
-{
-	unsigned long flags;
-	int begin;
-	int index;
-	static const char cr = '\r';
-
-	begin = 0;
-	spin_lock_irqsave(&consoleloglock, flags);
-	for (index = 0; index < count; index++) {
-		if (buf[index] == '\n') {
-			/*
-			 * Start right after the last '\n' or at the zeroth
-			 * array position and output the number of characters
-			 * including the newline.
-			 */
-			HvCall_writeLogBuffer(&buf[begin], index - begin + 1);
-			begin = index + 1;
-			HvCall_writeLogBuffer(&cr, 1);
-		}
-	}
-	if ((index - begin) > 0)
-		HvCall_writeLogBuffer(&buf[begin], index - begin);
-	spin_unlock_irqrestore(&consoleloglock, flags);
-}
-
-/*
- * Make sure we're pointing to a valid port_info structure.  Shamelessly
- * plagerized from serial.c
- */
-static inline int viotty_paranoia_check(struct port_info *pi,
-					char *name, const char *routine)
-{
-	static const char *bad_pi_addr = VIOCONS_KERN_WARN
-		"warning: bad address for port_info struct (%s) in %s\n";
-	static const char *badmagic = VIOCONS_KERN_WARN
-		"warning: bad magic number for port_info struct (%s) in %s\n";
-
-	if ((pi < &port_info[0]) || (viochar_port(pi) > VTTY_PORTS)) {
-		printk(bad_pi_addr, name, routine);
-		return 1;
-	}
-	if (pi->magic != VIOTTY_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-	return 0;
-}
-
-/*
- * Add data to our pending-send buffers.  
- *
- * NOTE: Don't use printk in here because it gets nastily recursive.
- * hvlog can be used to log to the hypervisor buffer
- */
-static int buffer_add(struct port_info *pi, const char *buf, size_t len)
-{
-	size_t bleft;
-	size_t curlen;
-	const char *curbuf;
-	int nextbuf;
-
-	curbuf = buf;
-	bleft = len;
-	while (bleft > 0) {
-		/*
-		 * If there is no space left in the current buffer, we have
-		 * filled everything up, so return.  If we filled the previous
-		 * buffer we would already have moved to the next one.
-		 */
-		if (pi->bufferBytes[pi->curbuf] == VIOCHAR_MAX_DATA) {
-			hvlog ("\n\rviocons: No overflow buffer available for memcpy().\n");
-			pi->bufferOverflow++;
-			pi->overflowMessage = 1;
-			break;
-		}
-
-		/*
-		 * Turn on the "used" bit for this buffer.  If it's already on,
-		 * that's fine.
-		 */
-		set_bit(pi->curbuf, &pi->used);
-
-		/*
-		 * See if this buffer has been allocated.  If not, allocate it.
-		 */
-		if (pi->buffer[pi->curbuf] == NULL) {
-			pi->buffer[pi->curbuf] =
-			    kmalloc(VIOCHAR_MAX_DATA, GFP_ATOMIC);
-			if (pi->buffer[pi->curbuf] == NULL) {
-				hvlog("\n\rviocons: kmalloc failed allocating spaces for buffer %d.",
-					pi->curbuf);
-				break;
-			}
-		}
-
-		/* Figure out how much we can copy into this buffer. */
-		if (bleft < (VIOCHAR_MAX_DATA - pi->bufferBytes[pi->curbuf]))
-			curlen = bleft;
-		else
-			curlen = VIOCHAR_MAX_DATA - pi->bufferBytes[pi->curbuf];
-
-		/* Copy the data into the buffer. */
-		memcpy(pi->buffer[pi->curbuf] + pi->bufferBytes[pi->curbuf],
-				curbuf, curlen);
-
-		pi->bufferBytes[pi->curbuf] += curlen;
-		curbuf += curlen;
-		bleft -= curlen;
-
-		/*
-		 * Now see if we've filled this buffer.  If not then
-		 * we'll try to use it again later.  If we've filled it
-		 * up then we'll advance the curbuf to the next in the
-		 * circular queue.
-		 */
-		if (pi->bufferBytes[pi->curbuf] == VIOCHAR_MAX_DATA) {
-			nextbuf = (pi->curbuf + 1) % VIOCHAR_NUM_BUF;
-			/*
-			 * Move to the next buffer if it hasn't been used yet
-			 */
-			if (test_bit(nextbuf, &pi->used) == 0)
-				pi->curbuf = nextbuf;
-		}
-	}
-	return len - bleft;
-}
-
-/*
- * Send pending data
- *
- * NOTE: Don't use printk in here because it gets nastily recursive.
- * hvlog can be used to log to the hypervisor buffer
- */
-static void send_buffers(struct port_info *pi)
-{
-	HvLpEvent_Rc hvrc;
-	int nextbuf;
-	struct viocharlpevent *viochar;
-	unsigned long flags;
-
-	spin_lock_irqsave(&consolelock, flags);
-
-	viochar = (struct viocharlpevent *)
-	    vio_get_event_buffer(viomajorsubtype_chario);
-
-	/* Make sure we got a buffer */
-	if (viochar == NULL) {
-		hvlog("\n\rviocons: Can't get viochar buffer in sendBuffers().");
-		spin_unlock_irqrestore(&consolelock, flags);
-		return;
-	}
-
-	if (pi->used == 0) {
-		hvlog("\n\rviocons: in sendbuffers(), but no buffers used.\n");
-		vio_free_event_buffer(viomajorsubtype_chario, viochar);
-		spin_unlock_irqrestore(&consolelock, flags);
-		return;
-	}
-
-	/*
-	 * curbuf points to the buffer we're filling.  We want to
-	 * start sending AFTER this one.  
-	 */
-	nextbuf = (pi->curbuf + 1) % VIOCHAR_NUM_BUF;
-
-	/*
-	 * Loop until we find a buffer with the used bit on
-	 */
-	while (test_bit(nextbuf, &pi->used) == 0)
-		nextbuf = (nextbuf + 1) % VIOCHAR_NUM_BUF;
-
-	initDataEvent(viochar, pi->lp);
-
-	/*
-	 * While we have buffers with data, and our send window
-	 * is open, send them
-	 */
-	while ((test_bit(nextbuf, &pi->used)) &&
-	       ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) {
-		viochar->len = pi->bufferBytes[nextbuf];
-		viochar->event.xCorrelationToken = pi->seq++;
-		viochar->event.xSizeMinus1 =
-			offsetof(struct viocharlpevent, data) + viochar->len;
-
-		memcpy(viochar->data, pi->buffer[nextbuf], viochar->len);
-
-		hvrc = HvCallEvent_signalLpEvent(&viochar->event);
-		if (hvrc) {
-			/*
-			 * MUST unlock the spinlock before doing a printk
-			 */
-			vio_free_event_buffer(viomajorsubtype_chario, viochar);
-			spin_unlock_irqrestore(&consolelock, flags);
-
-			printk(VIOCONS_KERN_WARN
-			       "error sending event! return code %d\n",
-			       (int)hvrc);
-			return;
-		}
-
-		/*
-		 * clear the used bit, zero the number of bytes in
-		 * this buffer, and move to the next buffer
-		 */
-		clear_bit(nextbuf, &pi->used);
-		pi->bufferBytes[nextbuf] = 0;
-		nextbuf = (nextbuf + 1) % VIOCHAR_NUM_BUF;
-	}
-
-	/*
-	 * If we have emptied all the buffers, start at 0 again.
-	 * this will re-use any allocated buffers
-	 */
-	if (pi->used == 0) {
-		pi->curbuf = 0;
-
-		if (pi->overflowMessage)
-			pi->overflowMessage = 0;
-
-		if (pi->tty) {
-			tty_wakeup(pi->tty);
-		}
-	}
-
-	vio_free_event_buffer(viomajorsubtype_chario, viochar);
-	spin_unlock_irqrestore(&consolelock, flags);
-}
-
-/*
- * Our internal writer.  Gets called both from the console device and
- * the tty device.  the tty pointer will be NULL if called from the console.
- * Return total number of bytes "written".
- *
- * NOTE: Don't use printk in here because it gets nastily recursive.  hvlog
- * can be used to log to the hypervisor buffer
- */
-static int internal_write(struct port_info *pi, const char *buf, size_t len)
-{
-	HvLpEvent_Rc hvrc;
-	size_t bleft;
-	size_t curlen;
-	const char *curbuf;
-	unsigned long flags;
-	struct viocharlpevent *viochar;
-
-	/*
-	 * Write to the hvlog of inbound data are now done prior to
-	 * calling internal_write() since internal_write() is only called in
-	 * the event that an lp event path is active, which isn't the case for
-	 * logging attempts prior to console initialization.
-	 *
-	 * If there is already data queued for this port, send it prior to
-	 * attempting to send any new data.
-	 */
-	if (pi->used)
-		send_buffers(pi);
-
-	spin_lock_irqsave(&consolelock, flags);
-
-	viochar = vio_get_event_buffer(viomajorsubtype_chario);
-	if (viochar == NULL) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		hvlog("\n\rviocons: Can't get vio buffer in internal_write().");
-		return -EAGAIN;
-	}
-	initDataEvent(viochar, pi->lp);
-
-	curbuf = buf;
-	bleft = len;
-
-	while ((bleft > 0) && (pi->used == 0) &&
-	       ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) {
-		if (bleft > VIOCHAR_MAX_DATA)
-			curlen = VIOCHAR_MAX_DATA;
-		else
-			curlen = bleft;
-
-		viochar->event.xCorrelationToken = pi->seq++;
-		memcpy(viochar->data, curbuf, curlen);
-		viochar->len = curlen;
-		viochar->event.xSizeMinus1 =
-		    offsetof(struct viocharlpevent, data) + curlen;
-
-		hvrc = HvCallEvent_signalLpEvent(&viochar->event);
-		if (hvrc) {
-			hvlog("viocons: error sending event! %d\n", (int)hvrc);
-			goto out;
-		}
-		curbuf += curlen;
-		bleft -= curlen;
-	}
-
-	/* If we didn't send it all, buffer as much of it as we can. */
-	if (bleft > 0)
-		bleft -= buffer_add(pi, curbuf, bleft);
-out:
-	vio_free_event_buffer(viomajorsubtype_chario, viochar);
-	spin_unlock_irqrestore(&consolelock, flags);
-	return len - bleft;
-}
-
-static struct port_info *get_port_data(struct tty_struct *tty)
-{
-	unsigned long flags;
-	struct port_info *pi;
-
-	spin_lock_irqsave(&consolelock, flags);
-	if (tty) {
-		pi = (struct port_info *)tty->driver_data;
-		if (!pi || viotty_paranoia_check(pi, tty->name,
-					     "get_port_data")) {
-			pi = NULL;
-		}
-	} else
-		/*
-		 * If this is the console device, use the lp from
-		 * the first port entry
-		 */
-		pi = &port_info[0];
-	spin_unlock_irqrestore(&consolelock, flags);
-	return pi;
-}
-
-/*
- * Initialize the common fields in a charLpEvent
- */
-static void initDataEvent(struct viocharlpevent *viochar, HvLpIndex lp)
-{
-	struct HvLpEvent *hev = &viochar->event;
-
-	memset(viochar, 0, sizeof(struct viocharlpevent));
-
-	hev->flags = HV_LP_EVENT_VALID | HV_LP_EVENT_DEFERRED_ACK |
-		HV_LP_EVENT_INT;
-	hev->xType = HvLpEvent_Type_VirtualIo;
-	hev->xSubtype = viomajorsubtype_chario | viochardata;
-	hev->xSourceLp = HvLpConfig_getLpIndex();
-	hev->xTargetLp = lp;
-	hev->xSizeMinus1 = sizeof(struct viocharlpevent);
-	hev->xSourceInstanceId = viopath_sourceinst(lp);
-	hev->xTargetInstanceId = viopath_targetinst(lp);
-}
-
-/*
- * early console device write
- */
-static void viocons_write_early(struct console *co, const char *s, unsigned count)
-{
-	hvlogOutput(s, count);
-}
-
-/*
- * console device write
- */
-static void viocons_write(struct console *co, const char *s, unsigned count)
-{
-	int index;
-	int begin;
-	struct port_info *pi;
-
-	static const char cr = '\r';
-
-	/*
-	 * Check port data first because the target LP might be valid but
-	 * simply not active, in which case we want to hvlog the output.
-	 */
-	pi = get_port_data(NULL);
-	if (pi == NULL) {
-		hvlog("\n\rviocons_write: unable to get port data.");
-		return;
-	}
-
-	hvlogOutput(s, count);
-
-	if (!viopath_isactive(pi->lp))
-		return;
-
-	/* 
-	 * Any newline character found will cause a
-	 * carriage return character to be emitted as well. 
-	 */
-	begin = 0;
-	for (index = 0; index < count; index++) {
-		if (s[index] == '\n') {
-			/* 
-			 * Newline found. Print everything up to and 
-			 * including the newline
-			 */
-			internal_write(pi, &s[begin], index - begin + 1);
-			begin = index + 1;
-			/* Emit a carriage return as well */
-			internal_write(pi, &cr, 1);
-		}
-	}
-
-	/* If any characters left to write, write them now */
-	if ((index - begin) > 0)
-		internal_write(pi, &s[begin], index - begin);
-}
-
-/*
- * Work out the device associate with this console
- */
-static struct tty_driver *viocons_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return viotty_driver;
-}
-
-/*
- * console device I/O methods
- */
-static struct console viocons_early = {
-	.name = "viocons",
-	.write = viocons_write_early,
-	.flags = CON_PRINTBUFFER,
-	.index = -1,
-};
-
-static struct console viocons = {
-	.name = "viocons",
-	.write = viocons_write,
-	.device = viocons_device,
-	.flags = CON_PRINTBUFFER,
-	.index = -1,
-};
-
-/*
- * TTY Open method
- */
-static int viotty_open(struct tty_struct *tty, struct file *filp)
-{
-	int port;
-	unsigned long flags;
-	struct port_info *pi;
-
-	port = tty->index;
-
-	if ((port < 0) || (port >= VTTY_PORTS))
-		return -ENODEV;
-
-	spin_lock_irqsave(&consolelock, flags);
-
-	pi = &port_info[port];
-	/* If some other TTY is already connected here, reject the open */
-	if ((pi->tty) && (pi->tty != tty)) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		printk(VIOCONS_KERN_WARN
-		       "attempt to open device twice from different ttys\n");
-		return -EBUSY;
-	}
-	tty->driver_data = pi;
-	pi->tty = tty;
-	spin_unlock_irqrestore(&consolelock, flags);
-
-	return 0;
-}
-
-/*
- * TTY Close method
- */
-static void viotty_close(struct tty_struct *tty, struct file *filp)
-{
-	unsigned long flags;
-	struct port_info *pi;
-
-	spin_lock_irqsave(&consolelock, flags);
-	pi = (struct port_info *)tty->driver_data;
-
-	if (!pi || viotty_paranoia_check(pi, tty->name, "viotty_close")) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		return;
-	}
-	if (tty->count == 1)
-		pi->tty = NULL;
-	spin_unlock_irqrestore(&consolelock, flags);
-}
-
-/*
- * TTY Write method
- */
-static int viotty_write(struct tty_struct *tty, const unsigned char *buf,
-		int count)
-{
-	struct port_info *pi;
-
-	pi = get_port_data(tty);
-	if (pi == NULL) {
-		hvlog("\n\rviotty_write: no port data.");
-		return -ENODEV;
-	}
-
-	if (viochar_is_console(pi))
-		hvlogOutput(buf, count);
-
-	/*
-	 * If the path to this LP is closed, don't bother doing anything more.
-	 * just dump the data on the floor and return count.  For some reason
-	 * some user level programs will attempt to probe available tty's and
-	 * they'll attempt a viotty_write on an invalid port which maps to an
-	 * invalid target lp.  If this is the case then ignore the
-	 * viotty_write call and, since the viopath isn't active to this
-	 * partition, return count.
-	 */
-	if (!viopath_isactive(pi->lp))
-		return count;
-
-	return internal_write(pi, buf, count);
-}
-
-/*
- * TTY put_char method
- */
-static int viotty_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	struct port_info *pi;
-
-	pi = get_port_data(tty);
-	if (pi == NULL)
-		return 0;
-
-	/* This will append '\r' as well if the char is '\n' */
-	if (viochar_is_console(pi))
-		hvlogOutput(&ch, 1);
-
-	if (viopath_isactive(pi->lp))
-		internal_write(pi, &ch, 1);
-	return 1;
-}
-
-/*
- * TTY write_room method
- */
-static int viotty_write_room(struct tty_struct *tty)
-{
-	int i;
-	int room = 0;
-	struct port_info *pi;
-	unsigned long flags;
-
-	spin_lock_irqsave(&consolelock, flags);
-	pi = (struct port_info *)tty->driver_data;
-	if (!pi || viotty_paranoia_check(pi, tty->name, "viotty_write_room")) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		return 0;
-	}
-
-	/* If no buffers are used, return the max size. */
-	if (pi->used == 0) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		return VIOCHAR_MAX_DATA * VIOCHAR_NUM_BUF;
-	}
-
-	/*
-	 * We retain the spinlock because we want to get an accurate
-	 * count and it can change on us between each operation if we
-	 * don't hold the spinlock.
-	 */
-	for (i = 0; ((i < VIOCHAR_NUM_BUF) && (room < VIOCHAR_MAX_DATA)); i++)
-		room += (VIOCHAR_MAX_DATA - pi->bufferBytes[i]);
-	spin_unlock_irqrestore(&consolelock, flags);
-
-	if (room > VIOCHAR_MAX_DATA)
-		room = VIOCHAR_MAX_DATA;
-	return room;
-}
-
-/*
- * TTY chars_in_buffer method
- */
-static int viotty_chars_in_buffer(struct tty_struct *tty)
-{
-	return 0;
-}
-
-static int viotty_ioctl(struct tty_struct *tty, struct file *file,
-			unsigned int cmd, unsigned long arg)
-{
-	switch (cmd) {
-	/*
-	 * the ioctls below read/set the flags usually shown in the leds
-	 * don't use them - they will go away without warning
-	 */
-	case KDGETLED:
-	case KDGKBLED:
-		return put_user(0, (char *)arg);
-
-	case KDSKBLED:
-		return 0;
-	}
-	/* FIXME: WTF is this being called for ??? */
-	lock_kernel();
-	ret =  n_tty_ioctl(tty, file, cmd, arg);
-	unlock_kernel();
-	return ret;
-}
-
-/*
- * Handle an open charLpEvent.  Could be either interrupt or ack
- */
-static void vioHandleOpenEvent(struct HvLpEvent *event)
-{
-	unsigned long flags;
-	struct viocharlpevent *cevent = (struct viocharlpevent *)event;
-	u8 port = cevent->virtual_device;
-	struct port_info *pi;
-	int reject = 0;
-
-	if (hvlpevent_is_ack(event)) {
-		if (port >= VTTY_PORTS)
-			return;
-
-		spin_lock_irqsave(&consolelock, flags);
-		/* Got the lock, don't cause console output */
-
-		pi = &port_info[port];
-		if (event->xRc == HvLpEvent_Rc_Good) {
-			pi->seq = pi->ack = 0;
-			/*
-			 * This line allows connections from the primary
-			 * partition but once one is connected from the
-			 * primary partition nothing short of a reboot
-			 * of linux will allow access from the hosting
-			 * partition again without a required iSeries fix.
-			 */
-			pi->lp = event->xTargetLp;
-		}
-
-		spin_unlock_irqrestore(&consolelock, flags);
-		if (event->xRc != HvLpEvent_Rc_Good)
-			printk(VIOCONS_KERN_WARN
-			       "handle_open_event: event->xRc == (%d).\n",
-			       event->xRc);
-
-		if (event->xCorrelationToken != 0) {
-			atomic_t *aptr= (atomic_t *)event->xCorrelationToken;
-			atomic_set(aptr, 1);
-		} else
-			printk(VIOCONS_KERN_WARN
-			       "weird...got open ack without atomic\n");
-		return;
-	}
-
-	/* This had better require an ack, otherwise complain */
-	if (!hvlpevent_need_ack(event)) {
-		printk(VIOCONS_KERN_WARN "viocharopen without ack bit!\n");
-		return;
-	}
-
-	spin_lock_irqsave(&consolelock, flags);
-	/* Got the lock, don't cause console output */
-
-	/* Make sure this is a good virtual tty */
-	if (port >= VTTY_PORTS) {
-		event->xRc = HvLpEvent_Rc_SubtypeError;
-		cevent->subtype_result_code = viorc_openRejected;
-		/*
-		 * Flag state here since we can't printk while holding
-		 * a spinlock.
-		 */
-		reject = 1;
-	} else {
-		pi = &port_info[port];
-		if ((pi->lp != HvLpIndexInvalid) &&
-				(pi->lp != event->xSourceLp)) {
-			/*
-			 * If this is tty is already connected to a different
-			 * partition, fail.
-			 */
-			event->xRc = HvLpEvent_Rc_SubtypeError;
-			cevent->subtype_result_code = viorc_openRejected;
-			reject = 2;
-		} else {
-			pi->lp = event->xSourceLp;
-			event->xRc = HvLpEvent_Rc_Good;
-			cevent->subtype_result_code = viorc_good;
-			pi->seq = pi->ack = 0;
-			reject = 0;
-		}
-	}
-
-	spin_unlock_irqrestore(&consolelock, flags);
-
-	if (reject == 1)
-		printk(VIOCONS_KERN_WARN "open rejected: bad virtual tty.\n");
-	else if (reject == 2)
-		printk(VIOCONS_KERN_WARN
-			"open rejected: console in exclusive use by another partition.\n");
-
-	/* Return the acknowledgement */
-	HvCallEvent_ackLpEvent(event);
-}
-
-/*
- * Handle a close charLpEvent.  This should ONLY be an Interrupt because the
- * virtual console should never actually issue a close event to the hypervisor
- * because the virtual console never goes away.  A close event coming from the
- * hypervisor simply means that there are no client consoles connected to the
- * virtual console.
- *
- * Regardless of the number of connections masqueraded on the other side of
- * the hypervisor ONLY ONE close event should be called to accompany the ONE
- * open event that is called.  The close event should ONLY be called when NO
- * MORE connections (masqueraded or not) exist on the other side of the
- * hypervisor.
- */
-static void vioHandleCloseEvent(struct HvLpEvent *event)
-{
-	unsigned long flags;
-	struct viocharlpevent *cevent = (struct viocharlpevent *)event;
-	u8 port = cevent->virtual_device;
-
-	if (hvlpevent_is_int(event)) {
-		if (port >= VTTY_PORTS) {
-			printk(VIOCONS_KERN_WARN
-					"close message from invalid virtual device.\n");
-			return;
-		}
-
-		/* For closes, just mark the console partition invalid */
-		spin_lock_irqsave(&consolelock, flags);
-		/* Got the lock, don't cause console output */
-
-		if (port_info[port].lp == event->xSourceLp)
-			port_info[port].lp = HvLpIndexInvalid;
-
-		spin_unlock_irqrestore(&consolelock, flags);
-		printk(VIOCONS_KERN_INFO "close from %d\n", event->xSourceLp);
-	} else
-		printk(VIOCONS_KERN_WARN
-				"got unexpected close acknowlegement\n");
-}
-
-/*
- * Handle a config charLpEvent.  Could be either interrupt or ack
- */
-static void vioHandleConfig(struct HvLpEvent *event)
-{
-	struct viocharlpevent *cevent = (struct viocharlpevent *)event;
-
-	HvCall_writeLogBuffer(cevent->data, cevent->len);
-
-	if (cevent->data[0] == 0x01)
-		printk(VIOCONS_KERN_INFO "window resized to %d: %d: %d: %d\n",
-		       cevent->data[1], cevent->data[2],
-		       cevent->data[3], cevent->data[4]);
-	else
-		printk(VIOCONS_KERN_WARN "unknown config event\n");
-}
-
-/*
- * Handle a data charLpEvent. 
- */
-static void vioHandleData(struct HvLpEvent *event)
-{
-	struct tty_struct *tty;
-	unsigned long flags;
-	struct viocharlpevent *cevent = (struct viocharlpevent *)event;
-	struct port_info *pi;
-	int index;
-	int num_pushed;
-	u8 port = cevent->virtual_device;
-
-	if (port >= VTTY_PORTS) {
-		printk(VIOCONS_KERN_WARN "data on invalid virtual device %d\n",
-				port);
-		return;
-	}
-
-	/*
-	 * Hold the spinlock so that we don't take an interrupt that
-	 * changes tty between the time we fetch the port_info
-	 * pointer and the time we paranoia check.
-	 */
-	spin_lock_irqsave(&consolelock, flags);
-	pi = &port_info[port];
-
-	/*
-	 * Change 05/01/2003 - Ryan Arnold: If a partition other than
-	 * the current exclusive partition tries to send us data
-	 * events then just drop them on the floor because we don't
-	 * want his stinking data.  He isn't authorized to receive
-	 * data because he wasn't the first one to get the console,
-	 * therefore he shouldn't be allowed to send data either.
-	 * This will work without an iSeries fix.
-	 */
-	if (pi->lp != event->xSourceLp) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		return;
-	}
-
-	tty = pi->tty;
-	if (tty == NULL) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		printk(VIOCONS_KERN_WARN "no tty for virtual device %d\n",
-				port);
-		return;
-	}
-
-	if (tty->magic != TTY_MAGIC) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		printk(VIOCONS_KERN_WARN "tty bad magic\n");
-		return;
-	}
-
-	/*
-	 * Just to be paranoid, make sure the tty points back to this port
-	 */
-	pi = (struct port_info *)tty->driver_data;
-	if (!pi || viotty_paranoia_check(pi, tty->name, "vioHandleData")) {
-		spin_unlock_irqrestore(&consolelock, flags);
-		return;
-	}
-	spin_unlock_irqrestore(&consolelock, flags);
-
-	/*
-	 * Change 07/21/2003 - Ryan Arnold: functionality added to
-	 * support sysrq utilizing ^O as the sysrq key.  The sysrq
-	 * functionality will only work if built into the kernel and
-	 * then only if sysrq is enabled through the proc filesystem.
-	 */
-	num_pushed = 0;
-	for (index = 0; index < cevent->len; index++) {
-		/*
-		 * Will be optimized away if !CONFIG_MAGIC_SYSRQ:
-		 */
-		if (sysrq_on()) {
-			/* 0x0f is the ascii character for ^O */
-			if (cevent->data[index] == '\x0f') {
-				vio_sysrq_pressed = 1;
-				/*
-				 * continue because we don't want to add
-				 * the sysrq key into the data string.
-				 */
-				continue;
-			} else if (vio_sysrq_pressed) {
-				handle_sysrq(cevent->data[index], tty);
-				vio_sysrq_pressed = 0;
-				/*
-				 * continue because we don't want to add
-				 * the sysrq sequence into the data string.
-				 */
-				continue;
-			}
-		}
-		/*
-		 * The sysrq sequence isn't included in this check if
-		 * sysrq is enabled and compiled into the kernel because
-		 * the sequence will never get inserted into the buffer.
-		 * Don't attempt to copy more data into the buffer than we
-		 * have room for because it would fail without indication.
-		 */
-		if(tty_insert_flip_char(tty, cevent->data[index], TTY_NORMAL) == 0) {
-			printk(VIOCONS_KERN_WARN "input buffer overflow!\n");
-			break;
-		}
-		num_pushed++;
-	}
-
-	if (num_pushed)
-		tty_flip_buffer_push(tty);
-}
-
-/*
- * Handle an ack charLpEvent. 
- */
-static void vioHandleAck(struct HvLpEvent *event)
-{
-	struct viocharlpevent *cevent = (struct viocharlpevent *)event;
-	unsigned long flags;
-	u8 port = cevent->virtual_device;
-
-	if (port >= VTTY_PORTS) {
-		printk(VIOCONS_KERN_WARN "data on invalid virtual device\n");
-		return;
-	}
-
-	spin_lock_irqsave(&consolelock, flags);
-	port_info[port].ack = event->xCorrelationToken;
-	spin_unlock_irqrestore(&consolelock, flags);
-
-	if (port_info[port].used)
-		send_buffers(&port_info[port]);
-}
-
-/*
- * Handle charLpEvents and route to the appropriate routine
- */
-static void vioHandleCharEvent(struct HvLpEvent *event)
-{
-	int charminor;
-
-	if (event == NULL)
-		return;
-
-	charminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK;
-	switch (charminor) {
-	case viocharopen:
-		vioHandleOpenEvent(event);
-		break;
-	case viocharclose:
-		vioHandleCloseEvent(event);
-		break;
-	case viochardata:
-		vioHandleData(event);
-		break;
-	case viocharack:
-		vioHandleAck(event);
-		break;
-	case viocharconfig:
-		vioHandleConfig(event);
-		break;
-	default:
-		if (hvlpevent_is_int(event) && hvlpevent_need_ack(event)) {
-			event->xRc = HvLpEvent_Rc_InvalidSubtype;
-			HvCallEvent_ackLpEvent(event);
-		}
-	}
-}
-
-/*
- * Send an open event
- */
-static int send_open(HvLpIndex remoteLp, void *sem)
-{
-	return HvCallEvent_signalLpEventFast(remoteLp,
-			HvLpEvent_Type_VirtualIo,
-			viomajorsubtype_chario | viocharopen,
-			HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck,
-			viopath_sourceinst(remoteLp),
-			viopath_targetinst(remoteLp),
-			(u64)(unsigned long)sem, VIOVERSION << 16,
-			0, 0, 0, 0);
-}
-
-static const struct tty_operations serial_ops = {
-	.open = viotty_open,
-	.close = viotty_close,
-	.write = viotty_write,
-	.put_char = viotty_put_char,
-	.write_room = viotty_write_room,
-	.chars_in_buffer = viotty_chars_in_buffer,
-	.ioctl = viotty_ioctl,
-};
-
-static int __init viocons_init2(void)
-{
-	atomic_t wait_flag;
-	int rc;
-
-	if (!firmware_has_feature(FW_FEATURE_ISERIES))
-		return -ENODEV;
-
-	/* +2 for fudge */
-	rc = viopath_open(HvLpConfig_getPrimaryLpIndex(),
-			viomajorsubtype_chario, VIOCHAR_WINDOW + 2);
-	if (rc)
-		printk(VIOCONS_KERN_WARN "error opening to primary %d\n", rc);
-
-	if (viopath_hostLp == HvLpIndexInvalid)
-		vio_set_hostlp();
-
-	/*
-	 * And if the primary is not the same as the hosting LP, open to the 
-	 * hosting lp
-	 */
-	if ((viopath_hostLp != HvLpIndexInvalid) &&
-	    (viopath_hostLp != HvLpConfig_getPrimaryLpIndex())) {
-		printk(VIOCONS_KERN_INFO "open path to hosting (%d)\n",
-				viopath_hostLp);
-		rc = viopath_open(viopath_hostLp, viomajorsubtype_chario,
-				VIOCHAR_WINDOW + 2);	/* +2 for fudge */
-		if (rc)
-			printk(VIOCONS_KERN_WARN
-				"error opening to partition %d: %d\n",
-				viopath_hostLp, rc);
-	}
-
-	if (vio_setHandler(viomajorsubtype_chario, vioHandleCharEvent) < 0)
-		printk(VIOCONS_KERN_WARN
-				"error seting handler for console events!\n");
-
-	/*
-	 * First, try to open the console to the hosting lp.
-	 * Wait on a semaphore for the response.
-	 */
-	atomic_set(&wait_flag, 0);
-	if ((viopath_isactive(viopath_hostLp)) &&
-	    (send_open(viopath_hostLp, (void *)&wait_flag) == 0)) {
-		printk(VIOCONS_KERN_INFO "hosting partition %d\n",
-			viopath_hostLp);
-		while (atomic_read(&wait_flag) == 0)
-			mb();
-		atomic_set(&wait_flag, 0);
-	}
-
-	/*
-	 * If we don't have an active console, try the primary
-	 */
-	if ((!viopath_isactive(port_info[0].lp)) &&
-	    (viopath_isactive(HvLpConfig_getPrimaryLpIndex())) &&
-	    (send_open(HvLpConfig_getPrimaryLpIndex(), (void *)&wait_flag)
-	     == 0)) {
-		printk(VIOCONS_KERN_INFO "opening console to primary partition\n");
-		while (atomic_read(&wait_flag) == 0)
-			mb();
-	}
-
-	/* Initialize the tty_driver structure */
-	viotty_driver = alloc_tty_driver(VTTY_PORTS);
-	viotty_driver->owner = THIS_MODULE;
-	viotty_driver->driver_name = "vioconsole";
-	viotty_driver->name = "tty";
-	viotty_driver->name_base = 1;
-	viotty_driver->major = TTY_MAJOR;
-	viotty_driver->minor_start = 1;
-	viotty_driver->type = TTY_DRIVER_TYPE_CONSOLE;
-	viotty_driver->subtype = 1;
-	viotty_driver->init_termios = tty_std_termios;
-	viotty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS;
-	tty_set_operations(viotty_driver, &serial_ops);
-
-	if (tty_register_driver(viotty_driver)) {
-		printk(VIOCONS_KERN_WARN "couldn't register console driver\n");
-		put_tty_driver(viotty_driver);
-		viotty_driver = NULL;
-	}
-
-	unregister_console(&viocons_early);
-	register_console(&viocons);
-
-	return 0;
-}
-
-static int __init viocons_init(void)
-{
-	int i;
-
-	if (!firmware_has_feature(FW_FEATURE_ISERIES))
-		return -ENODEV;
-
-	printk(VIOCONS_KERN_INFO "registering console\n");
-	for (i = 0; i < VTTY_PORTS; i++) {
-		port_info[i].lp = HvLpIndexInvalid;
-		port_info[i].magic = VIOTTY_MAGIC;
-	}
-	HvCall_setLogBufferFormatAndCodepage(HvCall_LogBuffer_ASCII, 437);
-	add_preferred_console("viocons", 0, NULL);
-	register_console(&viocons_early);
-	return 0;
-}
-
-console_initcall(viocons_init);
-module_init(viocons_init2);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 82a51f38a54..60359c36091 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -803,7 +803,25 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
  */
 #define VC_RESIZE_MAXCOL (32767)
 #define VC_RESIZE_MAXROW (32767)
-int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+
+/**
+ *	vc_do_resize	-	resizing method for the tty
+ *	@tty: tty being resized
+ *	@real_tty: real tty (different to tty if a pty/tty pair)
+ *	@vc: virtual console private data
+ *	@cols: columns
+ *	@lines: lines
+ *
+ *	Resize a virtual console, clipping according to the actual constraints.
+ *	If the caller passes a tty structure then update the termios winsize
+ *	information and perform any neccessary signal handling.
+ *
+ *	Caller must hold the console semaphore. Takes the termios mutex and
+ *	ctrl_lock of the tty IFF a tty is passed.
+ */
+
+static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+		struct vc_data *vc, unsigned int cols, unsigned int lines)
 {
 	unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
 	unsigned int old_cols, old_rows, old_row_size, old_screen_size;
@@ -907,26 +925,15 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
 	gotoxy(vc, vc->vc_x, vc->vc_y);
 	save_cur(vc);
 
-	if (vc->vc_tty) {
-		struct winsize ws, *cws = &vc->vc_tty->winsize;
-		struct pid *pgrp = NULL;
-
+	if (tty) {
+		/* Rewrite the requested winsize data with the actual
+		   resulting sizes */
+		struct winsize ws;
 		memset(&ws, 0, sizeof(ws));
 		ws.ws_row = vc->vc_rows;
 		ws.ws_col = vc->vc_cols;
 		ws.ws_ypixel = vc->vc_scan_lines;
-
-		mutex_lock(&vc->vc_tty->termios_mutex);
-		spin_lock_irq(&vc->vc_tty->ctrl_lock);
-		if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col))
-			pgrp = get_pid(vc->vc_tty->pgrp);
-		spin_unlock_irq(&vc->vc_tty->ctrl_lock);
-		if (pgrp) {
-			kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
-			put_pid(pgrp);
-		}
-		*cws = ws;
-		mutex_unlock(&vc->vc_tty->termios_mutex);
+		tty_do_resize(tty, real_tty, &ws);
 	}
 
 	if (CON_IS_VISIBLE(vc))
@@ -934,14 +941,47 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
 	return err;
 }
 
-int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+/**
+ *	vc_resize		-	resize a VT
+ *	@vc: virtual console
+ *	@cols: columns
+ *	@rows: rows
+ *
+ *	Resize a virtual console as seen from the console end of things. We
+ *	use the common vc_do_resize methods to update the structures. The
+ *	caller must hold the console sem to protect console internals and
+ *	vc->vc_tty
+ */
+
+int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
+{
+	return vc_do_resize(vc->vc_tty, vc->vc_tty, vc, cols, rows);
+}
+
+/**
+ *	vt_resize		-	resize a VT
+ *	@tty: tty to resize
+ *	@real_tty: tty if a pty/tty pair
+ *	@ws: winsize attributes
+ *
+ *	Resize a virtual terminal. This is called by the tty layer as we
+ *	register our own handler for resizing. The mutual helper does all
+ *	the actual work.
+ *
+ *	Takes the console sem and the called methods then take the tty
+ *	termios_mutex and the tty ctrl_lock in that order.
+ */
+
+int vt_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+	struct winsize *ws)
 {
-	int rc;
+	struct vc_data *vc = tty->driver_data;
+	int ret;
 
 	acquire_console_sem();
-	rc = vc_resize(vc, cols, lines);
+	ret = vc_do_resize(tty, real_tty, vc, ws->ws_col, ws->ws_row);
 	release_console_sem();
-	return rc;
+	return ret;
 }
 
 void vc_deallocate(unsigned int currcons)
@@ -2909,6 +2949,7 @@ static const struct tty_operations con_ops = {
 	.start = con_start,
 	.throttle = con_throttle,
 	.unthrottle = con_unthrottle,
+	.resize = vt_resize,
 };
 
 int __init vty_init(void)
@@ -4063,7 +4104,6 @@ EXPORT_SYMBOL(default_blu);
 EXPORT_SYMBOL(update_region);
 EXPORT_SYMBOL(redraw_screen);
 EXPORT_SYMBOL(vc_resize);
-EXPORT_SYMBOL(vc_lock_resize);
 EXPORT_SYMBOL(fg_console);
 EXPORT_SYMBOL(console_blank_hook);
 EXPORT_SYMBOL(console_blanked);
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 3211afd9d57..c904e9ad4a7 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -947,14 +947,16 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		    get_user(cc, &vtsizes->v_cols))
 			ret = -EFAULT;
 		else {
+			acquire_console_sem();
 			for (i = 0; i < MAX_NR_CONSOLES; i++) {
 				vc = vc_cons[i].d;
 
 				if (vc) {
 					vc->vc_resize_user = 1;
-					vc_lock_resize(vc_cons[i].d, cc, ll);
+					vc_resize(vc_cons[i].d, cc, ll);
 				}
 			}
+			release_console_sem();
 		}
 		break;
 	}
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index c5b1840906b..8b0252bf06e 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -38,7 +38,6 @@
 
 #include <linux/types.h>
 #include <linux/cdev.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index ffabd3ba2bd..62bda453c90 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -38,7 +38,6 @@
 
 #include <linux/types.h>
 #include <linux/cdev.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 8bfee5fb722..278c9857bcf 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -74,7 +74,6 @@
  * currently programmed in the FPGA.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 1f9c8b082db..24d0d9b938f 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -38,7 +38,6 @@
 
 #include <linux/types.h>
 #include <linux/cdev.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 5ca1d80de18..71d2ac4e3f4 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <asm/io.h>
 
 /*
@@ -151,13 +152,13 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
  */
 static int verify_pmtmr_rate(void)
 {
-	u32 value1, value2;
+	cycle_t value1, value2;
 	unsigned long count, delta;
 
 	mach_prepare_counter();
-	value1 = read_pmtmr();
+	value1 = clocksource_acpi_pm.read();
 	mach_countup(&count);
-	value2 = read_pmtmr();
+	value2 = clocksource_acpi_pm.read();
 	delta = (value2 - value1) & ACPI_PM_MASK;
 
 	/* Check that the PMTMR delta is within 5% of what we expect */
@@ -175,10 +176,15 @@ static int verify_pmtmr_rate(void)
 #define verify_pmtmr_rate() (0)
 #endif
 
+/* Number of monotonicity checks to perform during initialization */
+#define ACPI_PM_MONOTONICITY_CHECKS 10
+/* Number of reads we try to get two different values */
+#define ACPI_PM_READ_CHECKS 10000
+
 static int __init init_acpi_pm_clocksource(void)
 {
-	u32 value1, value2;
-	unsigned int i;
+	cycle_t value1, value2;
+	unsigned int i, j = 0;
 
 	if (!pmtmr_ioport)
 		return -ENODEV;
@@ -187,24 +193,29 @@ static int __init init_acpi_pm_clocksource(void)
 						clocksource_acpi_pm.shift);
 
 	/* "verify" this timing source: */
-	value1 = read_pmtmr();
-	for (i = 0; i < 10000; i++) {
-		value2 = read_pmtmr();
-		if (value2 == value1)
-			continue;
-		if (value2 > value1)
-			goto pm_good;
-		if ((value2 < value1) && ((value2) < 0xFFF))
-			goto pm_good;
-		printk(KERN_INFO "PM-Timer had inconsistent results:"
-			" 0x%#x, 0x%#x - aborting.\n", value1, value2);
-		return -EINVAL;
+	for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
+		udelay(100 * j);
+		value1 = clocksource_acpi_pm.read();
+		for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
+			value2 = clocksource_acpi_pm.read();
+			if (value2 == value1)
+				continue;
+			if (value2 > value1)
+				break;
+			if ((value2 < value1) && ((value2) < 0xFFF))
+				break;
+			printk(KERN_INFO "PM-Timer had inconsistent results:"
+			       " 0x%#llx, 0x%#llx - aborting.\n",
+			       value1, value2);
+			return -EINVAL;
+		}
+		if (i == ACPI_PM_READ_CHECKS) {
+			printk(KERN_INFO "PM-Timer failed consistency check "
+			       " (0x%#llx) - aborting.\n", value1);
+			return -ENODEV;
+		}
 	}
-	printk(KERN_INFO "PM-Timer had no reasonable result:"
-			" 0x%#x - aborting.\n", value1);
-	return -ENODEV;
 
-pm_good:
 	if (verify_pmtmr_rate() != 0)
 		return -ENODEV;
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8d6a3ff0267..8a67f16987d 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -825,6 +825,9 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	policy->user_policy.min = policy->cpuinfo.min_freq;
 	policy->user_policy.max = policy->cpuinfo.max_freq;
 
+	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+				     CPUFREQ_START, policy);
+
 #ifdef CONFIG_SMP
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index fe565ee4375..ac0bbf2d234 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -333,7 +333,7 @@ static void dbs_check_cpu(int cpu)
 {
 	unsigned int idle_ticks, up_idle_ticks, down_idle_ticks;
 	unsigned int tmp_idle_ticks, total_idle_ticks;
-	unsigned int freq_step;
+	unsigned int freq_target;
 	unsigned int freq_down_sampling_rate;
 	struct cpu_dbs_info_s *this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
 	struct cpufreq_policy *policy;
@@ -383,13 +383,13 @@ static void dbs_check_cpu(int cpu)
 		if (this_dbs_info->requested_freq == policy->max)
 			return;
 
-		freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
+		freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
 
 		/* max freq cannot be less than 100. But who knows.... */
-		if (unlikely(freq_step == 0))
-			freq_step = 5;
+		if (unlikely(freq_target == 0))
+			freq_target = 5;
 
-		this_dbs_info->requested_freq += freq_step;
+		this_dbs_info->requested_freq += freq_target;
 		if (this_dbs_info->requested_freq > policy->max)
 			this_dbs_info->requested_freq = policy->max;
 
@@ -425,19 +425,19 @@ static void dbs_check_cpu(int cpu)
 		/*
 		 * if we are already at the lowest speed then break out early
 		 * or if we 'cannot' reduce the speed as the user might want
-		 * freq_step to be zero
+		 * freq_target to be zero
 		 */
 		if (this_dbs_info->requested_freq == policy->min
 				|| dbs_tuners_ins.freq_step == 0)
 			return;
 
-		freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
+		freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
 
 		/* max freq cannot be less than 100. But who knows.... */
-		if (unlikely(freq_step == 0))
-			freq_step = 5;
+		if (unlikely(freq_target == 0))
+			freq_target = 5;
 
-		this_dbs_info->requested_freq -= freq_step;
+		this_dbs_info->requested_freq -= freq_target;
 		if (this_dbs_info->requested_freq < policy->min)
 			this_dbs_info->requested_freq = policy->min;
 
diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c
index ba7b9a6b17a..a4bec3f919a 100644
--- a/drivers/cpuidle/governors/ladder.c
+++ b/drivers/cpuidle/governors/ladder.c
@@ -67,10 +67,17 @@ static int ladder_select_state(struct cpuidle_device *dev)
 	struct ladder_device *ldev = &__get_cpu_var(ladder_devices);
 	struct ladder_device_state *last_state;
 	int last_residency, last_idx = ldev->last_state_idx;
+	int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
 
 	if (unlikely(!ldev))
 		return 0;
 
+	/* Special case when user has set very strict latency requirement */
+	if (unlikely(latency_req == 0)) {
+		ladder_do_selection(ldev, last_idx, 0);
+		return 0;
+	}
+
 	last_state = &ldev->states[last_idx];
 
 	if (dev->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID)
@@ -81,8 +88,7 @@ static int ladder_select_state(struct cpuidle_device *dev)
 	/* consider promotion */
 	if (last_idx < dev->state_count - 1 &&
 	    last_residency > last_state->threshold.promotion_time &&
-	    dev->states[last_idx + 1].exit_latency <=
-			pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
+	    dev->states[last_idx + 1].exit_latency <= latency_req) {
 		last_state->stats.promotion_count++;
 		last_state->stats.demotion_count = 0;
 		if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {
@@ -92,7 +98,19 @@ static int ladder_select_state(struct cpuidle_device *dev)
 	}
 
 	/* consider demotion */
-	if (last_idx > 0 &&
+	if (last_idx > CPUIDLE_DRIVER_STATE_START &&
+	    dev->states[last_idx].exit_latency > latency_req) {
+		int i;
+
+		for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) {
+			if (dev->states[i].exit_latency <= latency_req)
+				break;
+		}
+		ladder_do_selection(ldev, last_idx, i);
+		return i;
+	}
+
+	if (last_idx > CPUIDLE_DRIVER_STATE_START &&
 	    last_residency < last_state->threshold.demotion_time) {
 		last_state->stats.demotion_count++;
 		last_state->stats.promotion_count = 0;
@@ -117,7 +135,7 @@ static int ladder_enable_device(struct cpuidle_device *dev)
 	struct ladder_device_state *lstate;
 	struct cpuidle_state *state;
 
-	ldev->last_state_idx = 0;
+	ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START;
 
 	for (i = 0; i < dev->state_count; i++) {
 		state = &dev->states[i];
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 78d77c5dc35..8d7cf3f3145 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -34,21 +34,28 @@ static DEFINE_PER_CPU(struct menu_device, menu_devices);
 static int menu_select(struct cpuidle_device *dev)
 {
 	struct menu_device *data = &__get_cpu_var(menu_devices);
+	int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
 	int i;
 
+	/* Special case when user has set very strict latency requirement */
+	if (unlikely(latency_req == 0)) {
+		data->last_state_idx = 0;
+		return 0;
+	}
+
 	/* determine the expected residency time */
 	data->expected_us =
 		(u32) ktime_to_ns(tick_nohz_get_sleep_length()) / 1000;
 
 	/* find the deepest idle state that satisfies our constraints */
-	for (i = 1; i < dev->state_count; i++) {
+	for (i = CPUIDLE_DRIVER_STATE_START + 1; i < dev->state_count; i++) {
 		struct cpuidle_state *s = &dev->states[i];
 
 		if (s->target_residency > data->expected_us)
 			break;
 		if (s->target_residency > data->predicted_us)
 			break;
-		if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY))
+		if (s->exit_latency > latency_req)
 			break;
 	}
 
@@ -67,9 +74,9 @@ static void menu_reflect(struct cpuidle_device *dev)
 {
 	struct menu_device *data = &__get_cpu_var(menu_devices);
 	int last_idx = data->last_state_idx;
-	unsigned int measured_us =
-		cpuidle_get_last_residency(dev) + data->elapsed_us;
+	unsigned int last_idle_us = cpuidle_get_last_residency(dev);
 	struct cpuidle_state *target = &dev->states[last_idx];
+	unsigned int measured_us;
 
 	/*
 	 * Ugh, this idle state doesn't support residency measurements, so we
@@ -77,20 +84,27 @@ static void menu_reflect(struct cpuidle_device *dev)
 	 * for one full standard timer tick.  However, be aware that this
 	 * could potentially result in a suboptimal state transition.
 	 */
-	if (!(target->flags & CPUIDLE_FLAG_TIME_VALID))
-		measured_us = USEC_PER_SEC / HZ;
+	if (unlikely(!(target->flags & CPUIDLE_FLAG_TIME_VALID)))
+		last_idle_us = USEC_PER_SEC / HZ;
+
+	/*
+	 * measured_us and elapsed_us are the cumulative idle time, since the
+	 * last time we were woken out of idle by an interrupt.
+	 */
+	if (data->elapsed_us <= data->elapsed_us + last_idle_us)
+		measured_us = data->elapsed_us + last_idle_us;
+	else
+		measured_us = -1;
+
+	/* Predict time until next break event */
+	data->predicted_us = max(measured_us, data->last_measured_us);
 
-	/* Predict time remaining until next break event */
-	if (measured_us + BREAK_FUZZ < data->expected_us - target->exit_latency) {
-		data->predicted_us = max(measured_us, data->last_measured_us);
+	if (last_idle_us + BREAK_FUZZ <
+	    data->expected_us - target->exit_latency) {
 		data->last_measured_us = measured_us;
 		data->elapsed_us = 0;
 	} else {
-		if (data->elapsed_us < data->elapsed_us + measured_us)
-			data->elapsed_us = measured_us;
-		else
-			data->elapsed_us = -1;
-		data->predicted_us = max(measured_us, data->last_measured_us);
+		data->elapsed_us = measured_us;
 	}
 }
 
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 31a0e0b455b..97b003839fb 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -21,8 +21,8 @@ static int __init cpuidle_sysfs_setup(char *unused)
 }
 __setup("cpuidle_sysfs_switch", cpuidle_sysfs_setup);
 
-static ssize_t show_available_governors(struct sys_device *dev,
-		struct sysdev_attribute *attr, char *buf)
+static ssize_t show_available_governors(struct sysdev_class *class,
+					char *buf)
 {
 	ssize_t i = 0;
 	struct cpuidle_governor *tmp;
@@ -40,8 +40,8 @@ out:
 	return i;
 }
 
-static ssize_t show_current_driver(struct sys_device *dev,
-		struct sysdev_attribute *attr, char *buf)
+static ssize_t show_current_driver(struct sysdev_class *class,
+				   char *buf)
 {
 	ssize_t ret;
 
@@ -55,8 +55,8 @@ static ssize_t show_current_driver(struct sys_device *dev,
 	return ret;
 }
 
-static ssize_t show_current_governor(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t show_current_governor(struct sysdev_class *class,
+				     char *buf)
 {
 	ssize_t ret;
 
@@ -70,9 +70,8 @@ static ssize_t show_current_governor(struct sys_device *dev,
 	return ret;
 }
 
-static ssize_t store_current_governor(struct sys_device *dev,
-	struct sysdev_attribute *attr,
-	const char *buf, size_t count)
+static ssize_t store_current_governor(struct sysdev_class *class,
+				      const char *buf, size_t count)
 {
 	char gov_name[CPUIDLE_NAME_LEN];
 	int ret = -EINVAL;
@@ -104,8 +103,9 @@ static ssize_t store_current_governor(struct sys_device *dev,
 		return count;
 }
 
-static SYSDEV_ATTR(current_driver, 0444, show_current_driver, NULL);
-static SYSDEV_ATTR(current_governor_ro, 0444, show_current_governor, NULL);
+static SYSDEV_CLASS_ATTR(current_driver, 0444, show_current_driver, NULL);
+static SYSDEV_CLASS_ATTR(current_governor_ro, 0444, show_current_governor,
+			 NULL);
 
 static struct attribute *cpuclass_default_attrs[] = {
 	&attr_current_driver.attr,
@@ -113,9 +113,10 @@ static struct attribute *cpuclass_default_attrs[] = {
 	NULL
 };
 
-static SYSDEV_ATTR(available_governors, 0444, show_available_governors, NULL);
-static SYSDEV_ATTR(current_governor, 0644, show_current_governor,
-	store_current_governor);
+static SYSDEV_CLASS_ATTR(available_governors, 0444, show_available_governors,
+			 NULL);
+static SYSDEV_CLASS_ATTR(current_governor, 0644, show_current_governor,
+			 store_current_governor);
 
 static struct attribute *cpuclass_switch_attrs[] = {
 	&attr_available_governors.attr,
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 42a107fe923..2d637e0fbc0 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -27,8 +27,8 @@
 #include <crypto/authenc.h>
 #include <crypto/scatterwalk.h>
 
-#include <asm/arch/npe.h>
-#include <asm/arch/qmgr.h>
+#include <mach/npe.h>
+#include <mach/qmgr.h>
 
 #define MAX_KEYLEN 32
 
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 54a2a166e56..bf2917d197a 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <asm/byteorder.h>
+#include <asm/i387.h>
 #include "padlock.h"
 
 /* Control word. */
@@ -141,6 +142,12 @@ static inline void padlock_reset_key(void)
 	asm volatile ("pushfl; popfl");
 }
 
+/*
+ * While the padlock instructions don't use FP/SSE registers, they
+ * generate a spurious DNA fault when cr0.ts is '1'. These instructions
+ * should be used only inside the irq_ts_save/restore() context
+ */
+
 static inline void padlock_xcrypt(const u8 *input, u8 *output, void *key,
 				  void *control_word)
 {
@@ -205,15 +212,23 @@ static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key,
 static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
 	struct aes_ctx *ctx = aes_ctx(tfm);
+	int ts_state;
 	padlock_reset_key();
+
+	ts_state = irq_ts_save();
 	aes_crypt(in, out, ctx->E, &ctx->cword.encrypt);
+	irq_ts_restore(ts_state);
 }
 
 static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
 	struct aes_ctx *ctx = aes_ctx(tfm);
+	int ts_state;
 	padlock_reset_key();
+
+	ts_state = irq_ts_save();
 	aes_crypt(in, out, ctx->D, &ctx->cword.decrypt);
+	irq_ts_restore(ts_state);
 }
 
 static struct crypto_alg aes_alg = {
@@ -244,12 +259,14 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr,
 				   ctx->E, &ctx->cword.encrypt,
@@ -257,6 +274,7 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
 		nbytes &= AES_BLOCK_SIZE - 1;
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
+	irq_ts_restore(ts_state);
 
 	return err;
 }
@@ -268,12 +286,14 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr,
 				   ctx->D, &ctx->cword.decrypt,
@@ -281,7 +301,7 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
 		nbytes &= AES_BLOCK_SIZE - 1;
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
-
+	irq_ts_restore(ts_state);
 	return err;
 }
 
@@ -314,12 +334,14 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		u8 *iv = padlock_xcrypt_cbc(walk.src.virt.addr,
 					    walk.dst.virt.addr, ctx->E,
@@ -329,6 +351,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
 		nbytes &= AES_BLOCK_SIZE - 1;
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
+	irq_ts_restore(ts_state);
 
 	return err;
 }
@@ -340,12 +363,14 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		padlock_xcrypt_cbc(walk.src.virt.addr, walk.dst.virt.addr,
 				   ctx->D, walk.iv, &ctx->cword.decrypt,
@@ -354,6 +379,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
 
+	irq_ts_restore(ts_state);
 	return err;
 }
 
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index 40d5680fa01..a7fbadebf62 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/scatterlist.h>
+#include <asm/i387.h>
 #include "padlock.h"
 
 #define SHA1_DEFAULT_FALLBACK	"sha1-generic"
@@ -102,6 +103,7 @@ static void padlock_do_sha1(const char *in, char *out, int count)
 	 *     PadLock microcode needs it that big. */
 	char buf[128+16];
 	char *result = NEAREST_ALIGNED(buf);
+	int ts_state;
 
 	((uint32_t *)result)[0] = SHA1_H0;
 	((uint32_t *)result)[1] = SHA1_H1;
@@ -109,9 +111,12 @@ static void padlock_do_sha1(const char *in, char *out, int count)
 	((uint32_t *)result)[3] = SHA1_H3;
 	((uint32_t *)result)[4] = SHA1_H4;
  
+	/* prevent taking the spurious DNA fault with padlock. */
+	ts_state = irq_ts_save();
 	asm volatile (".byte 0xf3,0x0f,0xa6,0xc8" /* rep xsha1 */
 		      : "+S"(in), "+D"(result)
 		      : "c"(count), "a"(0));
+	irq_ts_restore(ts_state);
 
 	padlock_output_block((uint32_t *)result, (uint32_t *)out, 5);
 }
@@ -123,6 +128,7 @@ static void padlock_do_sha256(const char *in, char *out, int count)
 	 *     PadLock microcode needs it that big. */
 	char buf[128+16];
 	char *result = NEAREST_ALIGNED(buf);
+	int ts_state;
 
 	((uint32_t *)result)[0] = SHA256_H0;
 	((uint32_t *)result)[1] = SHA256_H1;
@@ -133,9 +139,12 @@ static void padlock_do_sha256(const char *in, char *out, int count)
 	((uint32_t *)result)[6] = SHA256_H6;
 	((uint32_t *)result)[7] = SHA256_H7;
 
+	/* prevent taking the spurious DNA fault with padlock. */
+	ts_state = irq_ts_save();
 	asm volatile (".byte 0xf3,0x0f,0xa6,0xd0" /* rep xsha256 */
 		      : "+S"(in), "+D"(result)
 		      : "c"(count), "a"(0));
+	irq_ts_restore(ts_state);
 
 	padlock_output_block((uint32_t *)result, (uint32_t *)out, 8);
 }
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 681c15f4208..b6ad3ac5916 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -96,6 +96,9 @@ struct talitos_private {
 	unsigned int exec_units;
 	unsigned int desc_types;
 
+	/* SEC Compatibility info */
+	unsigned long features;
+
 	/* next channel to be assigned next incoming descriptor */
 	atomic_t last_chan;
 
@@ -133,6 +136,9 @@ struct talitos_private {
 	struct hwrng rng;
 };
 
+/* .features flag */
+#define TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT 0x00000001
+
 /*
  * map virtual single (contiguous) pointer to h/w descriptor pointer
  */
@@ -785,7 +791,7 @@ static void ipsec_esp_encrypt_done(struct device *dev,
 	/* copy the generated ICV to dst */
 	if (edesc->dma_len) {
 		icvdata = &edesc->link_tbl[edesc->src_nents +
-					   edesc->dst_nents + 1];
+					   edesc->dst_nents + 2];
 		sg = sg_last(areq->dst, edesc->dst_nents);
 		memcpy((char *)sg_virt(sg) + sg->length - ctx->authsize,
 		       icvdata, ctx->authsize);
@@ -814,7 +820,7 @@ static void ipsec_esp_decrypt_done(struct device *dev,
 		/* auth check */
 		if (edesc->dma_len)
 			icvdata = &edesc->link_tbl[edesc->src_nents +
-						   edesc->dst_nents + 1];
+						   edesc->dst_nents + 2];
 		else
 			icvdata = &edesc->link_tbl[0];
 
@@ -921,10 +927,30 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 		sg_count = sg_to_link_tbl(areq->src, sg_count, cryptlen,
 					  &edesc->link_tbl[0]);
 		if (sg_count > 1) {
+			struct talitos_ptr *link_tbl_ptr =
+				&edesc->link_tbl[sg_count-1];
+			struct scatterlist *sg;
+			struct talitos_private *priv = dev_get_drvdata(dev);
+
 			desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
 			desc->ptr[4].ptr = cpu_to_be32(edesc->dma_link_tbl);
 			dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
 						   edesc->dma_len, DMA_BIDIRECTIONAL);
+			/* If necessary for this SEC revision,
+			 * add a link table entry for ICV.
+			 */
+			if ((priv->features &
+			     TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT) &&
+			    (edesc->desc.hdr & DESC_HDR_MODE0_ENCRYPT) == 0) {
+				link_tbl_ptr->j_extent = 0;
+				link_tbl_ptr++;
+				link_tbl_ptr->j_extent = DESC_PTR_LNKTBL_RETURN;
+				link_tbl_ptr->len = cpu_to_be16(authsize);
+				sg = sg_last(areq->src, edesc->src_nents ? : 1);
+				link_tbl_ptr->ptr = cpu_to_be32(
+						(char *)sg_dma_address(sg)
+						+ sg->length - authsize);
+			}
 		} else {
 			/* Only one segment now, so no link tbl needed */
 			desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->src));
@@ -944,12 +970,11 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 		desc->ptr[5].ptr = cpu_to_be32(sg_dma_address(areq->dst));
 	} else {
 		struct talitos_ptr *link_tbl_ptr =
-			&edesc->link_tbl[edesc->src_nents];
-		struct scatterlist *sg;
+			&edesc->link_tbl[edesc->src_nents + 1];
 
 		desc->ptr[5].ptr = cpu_to_be32((struct talitos_ptr *)
 					       edesc->dma_link_tbl +
-					       edesc->src_nents);
+					       edesc->src_nents + 1);
 		if (areq->src == areq->dst) {
 			memcpy(link_tbl_ptr, &edesc->link_tbl[0],
 			       edesc->src_nents * sizeof(struct talitos_ptr));
@@ -957,14 +982,10 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 			sg_count = sg_to_link_tbl(areq->dst, sg_count, cryptlen,
 						  link_tbl_ptr);
 		}
+		/* Add an entry to the link table for ICV data */
 		link_tbl_ptr += sg_count - 1;
-
-		/* handle case where sg_last contains the ICV exclusively */
-		sg = sg_last(areq->dst, edesc->dst_nents);
-		if (sg->length == ctx->authsize)
-			link_tbl_ptr--;
-
 		link_tbl_ptr->j_extent = 0;
+		sg_count++;
 		link_tbl_ptr++;
 		link_tbl_ptr->j_extent = DESC_PTR_LNKTBL_RETURN;
 		link_tbl_ptr->len = cpu_to_be16(authsize);
@@ -973,7 +994,7 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 		link_tbl_ptr->ptr = cpu_to_be32((struct talitos_ptr *)
 						edesc->dma_link_tbl +
 					        edesc->src_nents +
-						edesc->dst_nents + 1);
+						edesc->dst_nents + 2);
 
 		desc->ptr[5].j_extent |= DESC_PTR_LNKTBL_JUMP;
 		dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
@@ -1040,12 +1061,12 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 
 	/*
 	 * allocate space for base edesc plus the link tables,
-	 * allowing for a separate entry for the generated ICV (+ 1),
+	 * allowing for two separate entries for ICV and generated ICV (+ 2),
 	 * and the ICV data itself
 	 */
 	alloc_len = sizeof(struct ipsec_esp_edesc);
 	if (src_nents || dst_nents) {
-		dma_len = (src_nents + dst_nents + 1) *
+		dma_len = (src_nents + dst_nents + 2) *
 				 sizeof(struct talitos_ptr) + ctx->authsize;
 		alloc_len += dma_len;
 	} else {
@@ -1104,7 +1125,7 @@ static int aead_authenc_decrypt(struct aead_request *req)
 	/* stash incoming ICV for later cmp with ICV generated by the h/w */
 	if (edesc->dma_len)
 		icvdata = &edesc->link_tbl[edesc->src_nents +
-					   edesc->dst_nents + 1];
+					   edesc->dst_nents + 2];
 	else
 		icvdata = &edesc->link_tbl[0];
 
@@ -1136,6 +1157,8 @@ static int aead_authenc_givencrypt(
 	edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT;
 
 	memcpy(req->giv, ctx->iv, crypto_aead_ivsize(authenc));
+	/* avoid consecutive packets going out with same IV */
+	*(__be64 *)req->giv ^= cpu_to_be64(req->seq);
 
 	return ipsec_esp(edesc, areq, req->giv, req->seq,
 			 ipsec_esp_encrypt_done);
@@ -1428,6 +1451,8 @@ static int talitos_probe(struct of_device *ofdev,
 
 	priv->ofdev = ofdev;
 
+	INIT_LIST_HEAD(&priv->alg_list);
+
 	tasklet_init(&priv->done_task, talitos_done, (unsigned long)dev);
 	tasklet_init(&priv->error_task, talitos_error, (unsigned long)dev);
 
@@ -1480,6 +1505,9 @@ static int talitos_probe(struct of_device *ofdev,
 		goto err_out;
 	}
 
+	if (of_device_is_compatible(np, "fsl,sec3.0"))
+		priv->features |= TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT;
+
 	priv->head_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
 				  GFP_KERNEL);
 	priv->tail_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
@@ -1551,8 +1579,6 @@ static int talitos_probe(struct of_device *ofdev,
 	}
 
 	/* register crypto algorithms the device supports */
-	INIT_LIST_HEAD(&priv->alg_list);
-
 	for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
 		if (hw_supports(dev, driver_algs[i].desc_hdr_template)) {
 			struct talitos_crypto_alg *t_alg;
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index a52156e5688..bc8c6e3470c 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -551,7 +551,7 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
 	/* write address into NextDescriptor field of last desc in chain */
 	to_ioat_desc(ioat_chan->used_desc.prev)->hw->next =
 							first->async_tx.phys;
-	__list_splice(&new_chain, ioat_chan->used_desc.prev);
+	list_splice_tail(&new_chain, &ioat_chan->used_desc);
 
 	ioat_chan->dmacount += desc_count;
 	ioat_chan->pending += desc_count;
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 85bfeba4d85..71fba82462c 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -33,7 +33,7 @@
 #include <linux/memory.h>
 #include <linux/ioport.h>
 
-#include <asm/arch/adma.h>
+#include <mach/adma.h>
 
 #define to_iop_adma_chan(chan) container_of(chan, struct iop_adma_chan, common)
 #define to_iop_adma_device(dev) \
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index a4e4494663b..0328da020a1 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/memory.h>
-#include <asm/plat-orion/mv_xor.h>
+#include <plat/mv_xor.h>
 #include "mv_xor.h"
 
 static void mv_xor_issue_pending(struct dma_chan *chan);
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index b27b13c5eb5..4b55ec607a8 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -34,7 +34,6 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/workqueue.h>
-#include <linux/version.h>
 
 #define EDAC_MC_LABEL_LEN	31
 #define EDAC_DEVICE_NAME_LEN	31
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index fa6d6abefd4..45090243820 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -12,8 +12,8 @@ config FIREWIRE
 	  This is the "Juju" FireWire stack, a new alternative implementation
 	  designed for robustness and simplicity.  You can build either this
 	  stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
-	  Please read http://wiki.linux1394.org/JujuMigration before you
-	  enable the new stack.
+	  Please read http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
+	  before you enable the new stack.
 
 	  To compile this driver as a module, say M here: the module will be
 	  called firewire-core.
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index bc81d6fcd2f..2e6d5848d21 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -369,22 +369,33 @@ complete_transaction(struct fw_card *card, int rcode,
 	struct response *response = data;
 	struct client *client = response->client;
 	unsigned long flags;
+	struct fw_cdev_event_response *r = &response->response;
 
-	if (length < response->response.length)
-		response->response.length = length;
+	if (length < r->length)
+		r->length = length;
 	if (rcode == RCODE_COMPLETE)
-		memcpy(response->response.data, payload,
-		       response->response.length);
+		memcpy(r->data, payload, r->length);
 
 	spin_lock_irqsave(&client->lock, flags);
 	list_del(&response->resource.link);
 	spin_unlock_irqrestore(&client->lock, flags);
 
-	response->response.type   = FW_CDEV_EVENT_RESPONSE;
-	response->response.rcode  = rcode;
-	queue_event(client, &response->event, &response->response,
-		    sizeof(response->response) + response->response.length,
-		    NULL, 0);
+	r->type   = FW_CDEV_EVENT_RESPONSE;
+	r->rcode  = rcode;
+
+	/*
+	 * In the case that sizeof(*r) doesn't align with the position of the
+	 * data, and the read is short, preserve an extra copy of the data
+	 * to stay compatible with a pre-2.6.27 bug.  Since the bug is harmless
+	 * for short reads and some apps depended on it, this is both safe
+	 * and prudent for compatibility.
+	 */
+	if (r->length <= sizeof(*r) - offsetof(typeof(*r), data))
+		queue_event(client, &response->event, r, sizeof(*r),
+			    r->data, r->length);
+	else
+		queue_event(client, &response->event, r, sizeof(*r) + r->length,
+			    NULL, 0);
 }
 
 static int ioctl_send_request(struct client *client, void *buffer)
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 8024e3bfd87..b91ef63126e 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -669,8 +669,7 @@ static int __init ibft_register_kobjects(struct ibft_table_header *header,
 
 	control = (void *)header + sizeof(*header);
 	end = (void *)control + control->hdr.length;
-	eot_offset = (void *)header + header->length -
-		     (void *)control - sizeof(*header);
+	eot_offset = (void *)header + header->length - (void *)control;
 	rc = ibft_verify_hdr("control", (struct ibft_hdr *)control, id_control,
 			     sizeof(*control));
 
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index 11f17440fea..d53fbbfefa3 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -81,4 +81,3 @@ void __init reserve_ibft_region(void)
 	if (ibft_addr)
 		reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT);
 }
-EXPORT_SYMBOL_GPL(reserve_ibft_region);
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 001622eb86f..3bf8ee120d4 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -84,20 +84,23 @@ static struct kobj_type memmap_ktype = {
  */
 
 /*
- * Firmware memory map entries
+ * Firmware memory map entries. No locking is needed because the
+ * firmware_map_add() and firmware_map_add_early() functions are called
+ * in firmware initialisation code in one single thread of execution.
  */
 static LIST_HEAD(map_entries);
 
 /**
- * Common implementation of firmware_map_add() and firmware_map_add_early()
- * which expects a pre-allocated struct firmware_map_entry.
- *
+ * firmware_map_add_entry() - Does the real work to add a firmware memmap entry.
  * @start: Start of the memory range.
  * @end:   End of the memory range (inclusive).
  * @type:  Type of the memory range.
  * @entry: Pre-allocated (either kmalloc() or bootmem allocator), uninitialised
  *         entry.
- */
+ *
+ * Common implementation of firmware_map_add() and firmware_map_add_early()
+ * which expects a pre-allocated struct firmware_map_entry.
+ **/
 static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
 				  const char *type,
 				  struct firmware_map_entry *entry)
@@ -115,33 +118,52 @@ static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
 	return 0;
 }
 
-/*
- * See <linux/firmware-map.h> for documentation.
- */
+/**
+ * firmware_map_add() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ *
+ * This function uses kmalloc() for memory
+ * allocation. Use firmware_map_add_early() if you want to use the bootmem
+ * allocator.
+ *
+ * That function must be called before late_initcall.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ **/
 int firmware_map_add(resource_size_t start, resource_size_t end,
 		     const char *type)
 {
 	struct firmware_map_entry *entry;
 
 	entry = kmalloc(sizeof(struct firmware_map_entry), GFP_ATOMIC);
-	WARN_ON(!entry);
 	if (!entry)
 		return -ENOMEM;
 
 	return firmware_map_add_entry(start, end, type, entry);
 }
 
-/*
- * See <linux/firmware-map.h> for documentation.
- */
+/**
+ * firmware_map_add_early() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ *
+ * Adds a firmware mapping entry. This function uses the bootmem allocator
+ * for memory allocation. Use firmware_map_add() if you want to use kmalloc().
+ *
+ * That function must be called before late_initcall.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ **/
 int __init firmware_map_add_early(resource_size_t start, resource_size_t end,
 				  const char *type)
 {
 	struct firmware_map_entry *entry;
 
 	entry = alloc_bootmem_low(sizeof(struct firmware_map_entry));
-	WARN_ON(!entry);
-	if (!entry)
+	if (WARN_ON(!entry))
 		return -ENOMEM;
 
 	return firmware_map_add_entry(start, end, type, entry);
@@ -183,7 +205,10 @@ static ssize_t memmap_attr_show(struct kobject *kobj,
 /*
  * Initialises stuff and adds the entries in the map_entries list to
  * sysfs. Important is that firmware_map_add() and firmware_map_add_early()
- * must be called before late_initcall.
+ * must be called before late_initcall. That's just because that function
+ * is called as late_initcall() function, which means that if you call
+ * firmware_map_add() or firmware_map_add_early() afterwards, the entries
+ * are not added to sysfs.
  */
 static int __init memmap_init(void)
 {
@@ -192,13 +217,13 @@ static int __init memmap_init(void)
 	struct kset *memmap_kset;
 
 	memmap_kset = kset_create_and_add("memmap", NULL, firmware_kobj);
-	WARN_ON(!memmap_kset);
-	if (!memmap_kset)
+	if (WARN_ON(!memmap_kset))
 		return -ENOMEM;
 
 	list_for_each_entry(entry, &map_entries, list) {
 		entry->kobj.kset = memmap_kset;
-		kobject_add(&entry->kobj, NULL, "%d", i++);
+		if (kobject_add(&entry->kobj, NULL, "%d", i++))
+			kobject_put(&entry->kobj);
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 089c015c01d..53f0e5af1cc 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -400,27 +400,31 @@ static void drm_locked_tasklet_func(unsigned long data)
 {
 	struct drm_device *dev = (struct drm_device *)data;
 	unsigned long irqflags;
-
+	void (*tasklet_func)(struct drm_device *);
+	
 	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+	tasklet_func = dev->locked_tasklet_func;
+	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
 
-	if (!dev->locked_tasklet_func ||
+	if (!tasklet_func ||
 	    !drm_lock_take(&dev->lock,
 			   DRM_KERNEL_CONTEXT)) {
-		spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
 		return;
 	}
 
 	dev->lock.lock_time = jiffies;
 	atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
 
-	dev->locked_tasklet_func(dev);
+	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+	tasklet_func = dev->locked_tasklet_func;
+	dev->locked_tasklet_func = NULL;
+	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+	
+	if (tasklet_func != NULL)
+		tasklet_func(dev);
 
 	drm_lock_free(&dev->lock,
 		      DRM_KERNEL_CONTEXT);
-
-	dev->locked_tasklet_func = NULL;
-
-	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
 }
 
 /**
diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c
index 0998723cde7..a4caf95485d 100644
--- a/drivers/gpu/drm/drm_lock.c
+++ b/drivers/gpu/drm/drm_lock.c
@@ -105,14 +105,19 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 		  ret ? "interrupted" : "has lock");
 	if (ret) return ret;
 
-	sigemptyset(&dev->sigmask);
-	sigaddset(&dev->sigmask, SIGSTOP);
-	sigaddset(&dev->sigmask, SIGTSTP);
-	sigaddset(&dev->sigmask, SIGTTIN);
-	sigaddset(&dev->sigmask, SIGTTOU);
-	dev->sigdata.context = lock->context;
-	dev->sigdata.lock = dev->lock.hw_lock;
-	block_all_signals(drm_notifier, &dev->sigdata, &dev->sigmask);
+	/* don't set the block all signals on the master process for now 
+	 * really probably not the correct answer but lets us debug xkb
+ 	 * xserver for now */
+	if (!file_priv->master) {
+		sigemptyset(&dev->sigmask);
+		sigaddset(&dev->sigmask, SIGSTOP);
+		sigaddset(&dev->sigmask, SIGTSTP);
+		sigaddset(&dev->sigmask, SIGTTIN);
+		sigaddset(&dev->sigmask, SIGTTOU);
+		dev->sigdata.context = lock->context;
+		dev->sigdata.lock = dev->lock.hw_lock;
+		block_all_signals(drm_notifier, &dev->sigdata, &dev->sigmask);
+	}
 
 	if (dev->driver->dma_ready && (lock->flags & _DRM_LOCK_READY))
 		dev->driver->dma_ready(dev);
@@ -150,6 +155,7 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 {
 	struct drm_lock *lock = data;
 	unsigned long irqflags;
+	void (*tasklet_func)(struct drm_device *);
 
 	if (lock->context == DRM_KERNEL_CONTEXT) {
 		DRM_ERROR("Process %d using kernel context %d\n",
@@ -158,14 +164,11 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 	}
 
 	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
-
-	if (dev->locked_tasklet_func) {
-		dev->locked_tasklet_func(dev);
-
-		dev->locked_tasklet_func = NULL;
-	}
-
+	tasklet_func = dev->locked_tasklet_func;
+	dev->locked_tasklet_func = NULL;
 	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+	if (tasklet_func != NULL)
+		tasklet_func(dev);
 
 	atomic_inc(&dev->counts[_DRM_STAT_UNLOCKS]);
 
diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c
index 702df45320f..4b27d9abb7b 100644
--- a/drivers/gpu/drm/radeon/r300_cmdbuf.c
+++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c
@@ -77,6 +77,9 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
 				return -EFAULT;
 			}
 
+			box.x2--; /* Hardware expects inclusive bottom-right corner */
+			box.y2--;
+
 			if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
 				box.x1 = (box.x1) &
 					R300_CLIPRECT_MASK;
@@ -95,8 +98,8 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
 					R300_CLIPRECT_MASK;
 				box.y2 = (box.y2 + R300_CLIPRECT_OFFSET) &
 					R300_CLIPRECT_MASK;
-
 			}
+
 			OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) |
 				 (box.y1 << R300_CLIPRECT_Y_SHIFT));
 			OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) |
@@ -136,6 +139,18 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
 		ADVANCE_RING();
 	}
 
+	/* flus cache and wait idle clean after cliprect change */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(R300_RB3D_DC_FLUSH);
+	ADVANCE_RING();
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	ADVANCE_RING();
+	/* set flush flag */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
 	return 0;
 }
 
@@ -166,13 +181,13 @@ void r300_init_reg_flags(struct drm_device *dev)
 	ADD_RANGE(0x21DC, 1);
 	ADD_RANGE(R300_VAP_UNKNOWN_221C, 1);
 	ADD_RANGE(R300_VAP_CLIP_X_0, 4);
-	ADD_RANGE(R300_VAP_PVS_WAITIDLE, 1);
+	ADD_RANGE(R300_VAP_PVS_STATE_FLUSH_REG, 1);
 	ADD_RANGE(R300_VAP_UNKNOWN_2288, 1);
 	ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2);
 	ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
 	ADD_RANGE(R300_GB_ENABLE, 1);
 	ADD_RANGE(R300_GB_MSPOS0, 5);
-	ADD_RANGE(R300_TX_CNTL, 1);
+	ADD_RANGE(R300_TX_INVALTAGS, 1);
 	ADD_RANGE(R300_TX_ENABLE, 1);
 	ADD_RANGE(0x4200, 4);
 	ADD_RANGE(0x4214, 1);
@@ -388,15 +403,28 @@ static __inline__ int r300_emit_vpu(drm_radeon_private_t *dev_priv,
 	if (sz * 16 > cmdbuf->bufsz)
 		return -EINVAL;
 
-	BEGIN_RING(5 + sz * 4);
-	/* Wait for VAP to come to senses.. */
-	/* there is no need to emit it multiple times, (only once before VAP is programmed,
-	   but this optimization is for later */
-	OUT_RING_REG(R300_VAP_PVS_WAITIDLE, 0);
+	/* VAP is very sensitive so we purge cache before we program it
+	 * and we also flush its state before & after */
+	BEGIN_RING(6);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(R300_RB3D_DC_FLUSH);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	OUT_RING(CP_PACKET0(R300_VAP_PVS_STATE_FLUSH_REG, 0));
+	OUT_RING(0);
+	ADVANCE_RING();
+	/* set flush flag */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
+	BEGIN_RING(3 + sz * 4);
 	OUT_RING_REG(R300_VAP_PVS_UPLOAD_ADDRESS, addr);
 	OUT_RING(CP_PACKET0_TABLE(R300_VAP_PVS_UPLOAD_DATA, sz * 4 - 1));
 	OUT_RING_TABLE((int *)cmdbuf->buf, sz * 4);
+	ADVANCE_RING();
 
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_VAP_PVS_STATE_FLUSH_REG, 0));
+	OUT_RING(0);
 	ADVANCE_RING();
 
 	cmdbuf->buf += sz * 16;
@@ -424,6 +452,15 @@ static __inline__ int r300_emit_clear(drm_radeon_private_t *dev_priv,
 	OUT_RING_TABLE((int *)cmdbuf->buf, 8);
 	ADVANCE_RING();
 
+	BEGIN_RING(4);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(R300_RB3D_DC_FLUSH);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	ADVANCE_RING();
+	/* set flush flag */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
 	cmdbuf->buf += 8 * 4;
 	cmdbuf->bufsz -= 8 * 4;
 
@@ -543,22 +580,23 @@ static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv,
 	return 0;
 }
 
-static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv,
-					     drm_radeon_kcmd_buffer_t *cmdbuf)
+static __inline__ int r300_emit_draw_indx_2(drm_radeon_private_t *dev_priv,
+					    drm_radeon_kcmd_buffer_t *cmdbuf)
 {
-	u32 *cmd = (u32 *) cmdbuf->buf;
-	int count, ret;
+	u32 *cmd;
+	int count;
+	int expected_count;
 	RING_LOCALS;
 
-	count=(cmd[0]>>16) & 0x3fff;
+	cmd = (u32 *) cmdbuf->buf;
+	count = (cmd[0]>>16) & 0x3fff;
+	expected_count = cmd[1] >> 16;
+	if (!(cmd[1] & R300_VAP_VF_CNTL__INDEX_SIZE_32bit))
+		expected_count = (expected_count+1)/2;
 
-	if ((cmd[1] & 0x8000ffff) != 0x80000810) {
-		DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]);
-		return -EINVAL;
-	}
-	ret = !radeon_check_offset(dev_priv, cmd[2]);
-	if (ret) {
-		DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]);
+	if (count && count != expected_count) {
+		DRM_ERROR("3D_DRAW_INDX_2: packet size %i, expected %i\n",
+			count, expected_count);
 		return -EINVAL;
 	}
 
@@ -570,6 +608,50 @@ static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv,
 	cmdbuf->buf += (count+2)*4;
 	cmdbuf->bufsz -= (count+2)*4;
 
+	if (!count) {
+		drm_r300_cmd_header_t header;
+
+		if (cmdbuf->bufsz < 4*4 + sizeof(header)) {
+			DRM_ERROR("3D_DRAW_INDX_2: expect subsequent INDX_BUFFER, but stream is too short.\n");
+			return -EINVAL;
+		}
+
+		header.u = *(unsigned int *)cmdbuf->buf;
+
+		cmdbuf->buf += sizeof(header);
+		cmdbuf->bufsz -= sizeof(header);
+		cmd = (u32 *) cmdbuf->buf;
+
+		if (header.header.cmd_type != R300_CMD_PACKET3 ||
+		    header.packet3.packet != R300_CMD_PACKET3_RAW ||
+		    cmd[0] != CP_PACKET3(RADEON_CP_INDX_BUFFER, 2)) {
+			DRM_ERROR("3D_DRAW_INDX_2: expect subsequent INDX_BUFFER.\n");
+			return -EINVAL;
+		}
+
+		if ((cmd[1] & 0x8000ffff) != 0x80000810) {
+			DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]);
+			return -EINVAL;
+		}
+		if (!radeon_check_offset(dev_priv, cmd[2])) {
+			DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]);
+			return -EINVAL;
+		}
+		if (cmd[3] != expected_count) {
+			DRM_ERROR("INDX_BUFFER: buffer size %i, expected %i\n",
+				cmd[3], expected_count);
+			return -EINVAL;
+		}
+
+		BEGIN_RING(4);
+		OUT_RING(cmd[0]);
+		OUT_RING_TABLE((int *)(cmdbuf->buf + 4), 3);
+		ADVANCE_RING();
+
+		cmdbuf->buf += 4*4;
+		cmdbuf->bufsz -= 4*4;
+	}
+
 	return 0;
 }
 
@@ -613,11 +695,22 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
 	case RADEON_CNTL_BITBLT_MULTI:
 		return r300_emit_bitblt_multi(dev_priv, cmdbuf);
 
-	case RADEON_CP_INDX_BUFFER:	/* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
-		return r300_emit_indx_buffer(dev_priv, cmdbuf);
-	case RADEON_CP_3D_DRAW_IMMD_2:	/* triggers drawing using in-packet vertex data */
-	case RADEON_CP_3D_DRAW_VBUF_2:	/* triggers drawing of vertex buffers setup elsewhere */
-	case RADEON_CP_3D_DRAW_INDX_2:	/* triggers drawing using indices to vertex buffer */
+	case RADEON_CP_INDX_BUFFER:
+		DRM_ERROR("packet3 INDX_BUFFER without preceding 3D_DRAW_INDX_2 is illegal.\n");
+		return -EINVAL;
+	case RADEON_CP_3D_DRAW_IMMD_2:
+		/* triggers drawing using in-packet vertex data */
+	case RADEON_CP_3D_DRAW_VBUF_2:
+		/* triggers drawing of vertex buffers setup elsewhere */
+		dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED |
+					   RADEON_PURGE_EMITED);
+		break;
+	case RADEON_CP_3D_DRAW_INDX_2:
+		/* triggers drawing using indices to vertex buffer */
+		/* whenever we send vertex we clear flush & purge */
+		dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED |
+					   RADEON_PURGE_EMITED);
+		return r300_emit_draw_indx_2(dev_priv, cmdbuf);
 	case RADEON_WAIT_FOR_IDLE:
 	case RADEON_CP_NOP:
 		/* these packets are safe */
@@ -713,17 +806,53 @@ static __inline__ int r300_emit_packet3(drm_radeon_private_t *dev_priv,
  */
 static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
 {
+	uint32_t cache_z, cache_3d, cache_2d;
 	RING_LOCALS;
 
-	BEGIN_RING(6);
-	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
-	OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A);
+	cache_z = R300_ZC_FLUSH;
+	cache_2d = R300_RB2D_DC_FLUSH;
+	cache_3d = R300_RB3D_DC_FLUSH;
+	if (!(dev_priv->track_flush & RADEON_PURGE_EMITED)) {
+		/* we can purge, primitive where draw since last purge */
+		cache_z |= R300_ZC_FREE;
+		cache_2d |= R300_RB2D_DC_FREE;
+		cache_3d |= R300_RB3D_DC_FREE;
+	}
+
+	/* flush & purge zbuffer */
+	BEGIN_RING(2);
 	OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));
-	OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE|
-		 R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE);
-	OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
-	OUT_RING(0x0);
+	OUT_RING(cache_z);
+	ADVANCE_RING();
+	/* flush & purge 3d */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(cache_3d);
+	ADVANCE_RING();
+	/* flush & purge texture */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_TX_INVALTAGS, 0));
+	OUT_RING(0);
+	ADVANCE_RING();
+	/* FIXME: is this one really needed ? */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_RB3D_AARESOLVE_CTL, 0));
+	OUT_RING(0);
+	ADVANCE_RING();
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	ADVANCE_RING();
+	/* flush & purge 2d through E2 as RB2D will trigger lockup */
+	BEGIN_RING(4);
+	OUT_RING(CP_PACKET0(R300_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(cache_2d);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_2D_IDLECLEAN |
+		 RADEON_WAIT_HOST_IDLECLEAN);
 	ADVANCE_RING();
+	/* set flush & purge flags */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED | RADEON_PURGE_EMITED;
 }
 
 /**
@@ -905,8 +1034,7 @@ int r300_do_cp_cmdbuf(struct drm_device *dev,
 
 	DRM_DEBUG("\n");
 
-	/* See the comment above r300_emit_begin3d for why this call must be here,
-	 * and what the cleanup gotos are for. */
+	/* pacify */
 	r300_pacify(dev_priv);
 
 	if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) {
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index a6802f26afc..ee6f811599a 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -317,7 +317,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
  * Therefore, I suspect writing zero to 0x2284 synchronizes the engine and
  * avoids bugs caused by still running shaders reading bad data from memory.
  */
-#define R300_VAP_PVS_WAITIDLE               0x2284 /* GUESS */
+#define R300_VAP_PVS_STATE_FLUSH_REG        0x2284
 
 /* Absolutely no clue what this register is about. */
 #define R300_VAP_UNKNOWN_2288               0x2288
@@ -513,7 +513,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 /* gap */
 
 /* Zero to flush caches. */
-#define R300_TX_CNTL                        0x4100
+#define R300_TX_INVALTAGS                   0x4100
 #define R300_TX_FLUSH                       0x0
 
 /* The upper enable bits are guessed, based on fglrx reported limits. */
@@ -1362,6 +1362,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #define R300_RB3D_COLORPITCH2               0x4E40 /* GUESS */
 #define R300_RB3D_COLORPITCH3               0x4E44 /* GUESS */
 
+#define R300_RB3D_AARESOLVE_CTL             0x4E88
 /* gap */
 
 /* Guess by Vladimir.
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index f0de81a5689..248ab4a7d39 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -40,6 +40,7 @@
 #define RADEON_FIFO_DEBUG	0
 
 static int radeon_do_cleanup_cp(struct drm_device * dev);
+static void radeon_do_cp_start(drm_radeon_private_t * dev_priv);
 
 static u32 R500_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
 {
@@ -198,23 +199,8 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv)
 			DRM_UDELAY(1);
 		}
 	} else {
-		/* 3D */
-		tmp = RADEON_READ(R300_RB3D_DSTCACHE_CTLSTAT);
-		tmp |= RADEON_RB3D_DC_FLUSH_ALL;
-		RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp);
-
-		/* 2D */
-		tmp = RADEON_READ(R300_DSTCACHE_CTLSTAT);
-		tmp |= RADEON_RB3D_DC_FLUSH_ALL;
-		RADEON_WRITE(R300_DSTCACHE_CTLSTAT, tmp);
-
-		for (i = 0; i < dev_priv->usec_timeout; i++) {
-			if (!(RADEON_READ(R300_DSTCACHE_CTLSTAT)
-			  & RADEON_RB3D_DC_BUSY)) {
-				return 0;
-			}
-			DRM_UDELAY(1);
-		}
+		/* don't flush or purge cache here or lockup */
+		return 0;
 	}
 
 #if RADEON_FIFO_DEBUG
@@ -237,6 +223,9 @@ static int radeon_do_wait_for_fifo(drm_radeon_private_t * dev_priv, int entries)
 			return 0;
 		DRM_UDELAY(1);
 	}
+	DRM_DEBUG("wait for fifo failed status : 0x%08X 0x%08X\n",
+		 RADEON_READ(RADEON_RBBM_STATUS),
+		 RADEON_READ(R300_VAP_CNTL_STATUS));
 
 #if RADEON_FIFO_DEBUG
 	DRM_ERROR("failed!\n");
@@ -263,6 +252,9 @@ static int radeon_do_wait_for_idle(drm_radeon_private_t * dev_priv)
 		}
 		DRM_UDELAY(1);
 	}
+	DRM_DEBUG("wait idle failed status : 0x%08X 0x%08X\n",
+		 RADEON_READ(RADEON_RBBM_STATUS),
+		 RADEON_READ(R300_VAP_CNTL_STATUS));
 
 #if RADEON_FIFO_DEBUG
 	DRM_ERROR("failed!\n");
@@ -443,14 +435,20 @@ static void radeon_do_cp_start(drm_radeon_private_t * dev_priv)
 
 	dev_priv->cp_running = 1;
 
-	BEGIN_RING(6);
-
+	BEGIN_RING(8);
+	/* isync can only be written through cp on r5xx write it here */
+	OUT_RING(CP_PACKET0(RADEON_ISYNC_CNTL, 0));
+	OUT_RING(RADEON_ISYNC_ANY2D_IDLE3D |
+		 RADEON_ISYNC_ANY3D_IDLE2D |
+		 RADEON_ISYNC_WAIT_IDLEGUI |
+		 RADEON_ISYNC_CPSCRATCH_IDLEGUI);
 	RADEON_PURGE_CACHE();
 	RADEON_PURGE_ZCACHE();
 	RADEON_WAIT_UNTIL_IDLE();
-
 	ADVANCE_RING();
 	COMMIT_RING();
+
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED | RADEON_PURGE_EMITED;
 }
 
 /* Reset the Command Processor.  This will not flush any pending
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 349ac3d3b84..637bd7faf13 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -38,7 +38,7 @@
 
 int radeon_no_wb;
 
-MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers\n");
+MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers");
 module_param_named(no_wb, radeon_no_wb, int, 0444);
 
 static int dri_library_name(struct drm_device *dev, char *buf)
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 3f0eca957aa..09938169317 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -220,6 +220,9 @@ struct radeon_virt_surface {
 	struct drm_file *file_priv;
 };
 
+#define RADEON_FLUSH_EMITED	(1 < 0)
+#define RADEON_PURGE_EMITED	(1 < 1)
+
 typedef struct drm_radeon_private {
 	drm_radeon_ring_buffer_t ring;
 	drm_radeon_sarea_t *sarea_priv;
@@ -311,6 +314,7 @@ typedef struct drm_radeon_private {
 	unsigned long fb_aper_offset;
 
 	int num_gb_pipes;
+	int track_flush;
 } drm_radeon_private_t;
 
 typedef struct drm_radeon_buf_priv {
@@ -693,7 +697,6 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #define R300_ZB_ZCACHE_CTLSTAT                  0x4f18
 #	define R300_ZC_FLUSH		        (1 << 0)
 #	define R300_ZC_FREE		        (1 << 1)
-#	define R300_ZC_FLUSH_ALL		0x3
 #	define R300_ZC_BUSY		        (1 << 31)
 #define RADEON_RB3D_DSTCACHE_CTLSTAT	0x325c
 #	define RADEON_RB3D_DC_FLUSH		(3 << 0)
@@ -701,6 +704,8 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #	define RADEON_RB3D_DC_FLUSH_ALL		0xf
 #	define RADEON_RB3D_DC_BUSY		(1 << 31)
 #define R300_RB3D_DSTCACHE_CTLSTAT              0x4e4c
+#	define R300_RB3D_DC_FLUSH		(2 << 0)
+#	define R300_RB3D_DC_FREE		(2 << 2)
 #	define R300_RB3D_DC_FINISH		(1 << 4)
 #define RADEON_RB3D_ZSTENCILCNTL	0x1c2c
 #	define RADEON_Z_TEST_MASK		(7 << 4)
@@ -1246,17 +1251,17 @@ do {									\
 		OUT_RING(RADEON_RB3D_DC_FLUSH);				\
 	} else {                                                        \
 		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_DC_FLUSH);				\
+		OUT_RING(R300_RB3D_DC_FLUSH);				\
 	}                                                               \
 } while (0)
 
 #define RADEON_PURGE_CACHE() do {					\
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {	\
 		OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_DC_FLUSH_ALL);			\
+		OUT_RING(RADEON_RB3D_DC_FLUSH | RADEON_RB3D_DC_FREE);	\
 	} else {                                                        \
 		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_DC_FLUSH_ALL);			\
+		OUT_RING(R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);	\
 	}                                                               \
 } while (0)
 
@@ -1273,10 +1278,10 @@ do {									\
 #define RADEON_PURGE_ZCACHE() do {					\
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {	\
 		OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL);			\
+		OUT_RING(RADEON_RB3D_ZC_FLUSH | RADEON_RB3D_ZC_FREE);			\
 	} else {                                                        \
-		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(R300_ZC_FLUSH_ALL);				\
+		OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));	\
+		OUT_RING(R300_ZC_FLUSH | R300_ZC_FREE);				\
 	}                                                               \
 } while (0)
 
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 61e78a4369b..b15f8824963 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -654,12 +654,12 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE},
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN  | HID_QUIRK_IGNORE_MOUSE },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 00ff5334849..d402e8d813c 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -57,6 +57,16 @@ config SENSORS_ABITUGURU3
 	  This driver can also be built as a module.  If so, the module
 	  will be called abituguru3.
 
+config SENSORS_AD7414
+	tristate "Analog Devices AD7414"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Analog Devices
+	  AD7414 temperature monitoring chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called ad7414.
+
 config SENSORS_AD7418
 	tristate "Analog Devices AD7416, AD7417 and AD7418"
 	depends on I2C && EXPERIMENTAL
@@ -67,6 +77,22 @@ config SENSORS_AD7418
 	  This driver can also be built as a module. If so, the module
 	  will be called ad7418.
 
+config SENSORS_ADCXX
+	tristate "National Semiconductor ADCxxxSxxx"
+	depends on SPI_MASTER && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  ADC<bb><c>S<sss> chip family, where
+	  * bb  is the resolution in number of bits (8, 10, 12)
+	  * c   is the number of channels (1, 2, 4, 8)
+	  * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+	    kSPS and 101 for 1 MSPS)
+
+	  Examples : ADC081S101, ADC124S501, ...
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called adcxx.
+
 config SENSORS_ADM1021
 	tristate "Analog Devices ADM1021 and compatibles"
 	depends on I2C
@@ -124,7 +150,7 @@ config SENSORS_ADM1031
 
 config SENSORS_ADM9240
 	tristate "Analog Devices ADM9240 and compatibles"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	select HWMON_VID
 	help
 	  If you say yes here you get support for Analog Devices ADM9240,
@@ -394,13 +420,24 @@ config SENSORS_LM75
 	tristate "National Semiconductor LM75 and compatibles"
 	depends on I2C
 	help
-	  If you say yes here you get support for National Semiconductor LM75
-	  sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
-	  9-bit precision mode), and TelCom (now Microchip) TCN75.
+	  If you say yes here you get support for one common type of
+	  temperature sensor chip, with models including:
+
+		- Dallas Semiconductor DS75 and DS1775
+		- Maxim MAX6625 and MAX6626
+		- Microchip MCP980x
+		- National Semiconductor LM75
+		- NXP's LM75A
+		- ST Microelectronics STDS75
+		- TelCom (now Microchip) TCN75
+		- Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
+
+	  This driver supports driver model based binding through board
+	  specific I2C device tables.
 
-	  The DS75 and DS1775 in 10- to 12-bit precision modes will require
-	  a force module parameter. The driver will not handle the extra
-	  precision anyhow.
+	  It also supports the "legacy" style of driver binding.  To use
+	  that with some chips which don't replicate LM75 quirks exactly,
+	  you may need the "force" module parameter.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm75.
@@ -564,8 +601,8 @@ config SENSORS_DME1737
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the hardware monitoring
-	  and fan control features of the SMSC DME1737 (and compatibles
-	  like the Asus A8000) and SCH311x Super-I/O chips.
+	  and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
+	  Asus A8000 Super-I/O chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called dme1737.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d098677e08d..950134ab842 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -15,7 +15,9 @@ obj-$(CONFIG_SENSORS_W83791D)	+= w83791d.o
 
 obj-$(CONFIG_SENSORS_ABITUGURU)	+= abituguru.o
 obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
+obj-$(CONFIG_SENSORS_AD7414)	+= ad7414.o
 obj-$(CONFIG_SENSORS_AD7418)	+= ad7418.o
+obj-$(CONFIG_SENSORS_ADCXX)	+= adcxx.o
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
 obj-$(CONFIG_SENSORS_ADM1025)	+= adm1025.o
 obj-$(CONFIG_SENSORS_ADM1026)	+= adm1026.o
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index f00f497b9ca..d568c65c137 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -1,5 +1,8 @@
 /*
-    abituguru3.c Copyright (c) 2006 Hans de Goede <j.w.r.degoede@hhs.nl>
+    abituguru3.c
+
+    Copyright (c) 2006-2008 Hans de Goede <j.w.r.degoede@hhs.nl>
+    Copyright (c) 2008 Alistair John Strachan <alistair@devzero.co.uk>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -116,7 +119,7 @@ struct abituguru3_sensor_info {
 
 struct abituguru3_motherboard_info {
 	u16 id;
-	const char *name;
+	const char *dmi_name;
 	/* + 1 -> end of sensors indicated by a sensor with name == NULL */
 	struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
 };
@@ -161,7 +164,7 @@ struct abituguru3_data {
 
 /* Constants */
 static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
-	{ 0x000C, "unknown", {
+	{ 0x000C, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -183,7 +186,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		35, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000D, "Abit AW8", {
+	{ 0x000D, NULL /* Abit AW8, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -212,7 +215,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000E, "AL-8", {
+	{ 0x000E, NULL /* AL-8, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -233,7 +236,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000F, "unknown", {
+	{ 0x000F, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -254,7 +257,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0010, "Abit NI8 SLI GR", {
+	{ 0x0010, NULL /* Abit NI8 SLI GR, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -276,7 +279,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "OTES1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0011, "Abit AT8 32X", {
+	{ 0x0011, NULL /* Abit AT8 32X, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -302,7 +305,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX2 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0012, "Abit AN8 32X", {
+	{ 0x0012, NULL /* Abit AN8 32X, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -324,7 +327,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0013, "Abit AW8D", {
+	{ 0x0013, NULL /* Abit AW8D, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -353,7 +356,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0014, "Abit AB9 Pro", {
+	{ 0x0014, NULL /* Abit AB9 Pro, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -374,7 +377,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0015, "unknown", {
+	{ 0x0015, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -398,7 +401,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0016, "AW9D-MAX", {
+	{ 0x0016, NULL /* AW9D-MAX, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -426,7 +429,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "OTES1 Fan",		38, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0017, "unknown", {
+	{ 0x0017, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -451,7 +454,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 FAN",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0018, "unknown", {
+	{ 0x0018, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -478,7 +481,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0019, "unknown", {
+	{ 0x0019, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 7, 0, 10, 1, 0 },
 		{ "DDR2",		13, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		14, 0, 10, 1, 0 },
@@ -505,7 +508,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 FAN",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001A, "Abit IP35 Pro", {
+	{ 0x001A, "IP35 Pro(Intel P35-ICH9R)", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -533,7 +536,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX4 Fan",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001B, "unknown", {
+	{ 0x001B, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR3",		 1, 0, 20, 1, 0 },
 		{ "DDR3 VTT",		 2, 0, 10, 1, 0 },
@@ -560,7 +563,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001C, "unknown", {
+	{ 0x001C, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -935,9 +938,18 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
 		goto abituguru3_probe_error;
 	}
 	data->sensors = abituguru3_motherboards[i].sensors;
+
 	printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
-		"ID: %04X (%s)\n", (unsigned int)id,
-		abituguru3_motherboards[i].name);
+		"ID: %04X\n", (unsigned int)id);
+
+#ifdef CONFIG_DMI
+	if (!abituguru3_motherboards[i].dmi_name) {
+		printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
+			"not detected using DMI. Please send the output of "
+			"\"dmidecode\" to the abituguru3 maintainer"
+			"(see MAINTAINERS)\n");
+	}
+#endif
 
 	/* Fill the sysfs attr array */
 	sysfs_attr_i = 0;
@@ -1109,6 +1121,46 @@ static struct platform_driver abituguru3_driver = {
 	.resume = abituguru3_resume
 };
 
+#ifdef CONFIG_DMI
+
+static int __init abituguru3_dmi_detect(void)
+{
+	const char *board_vendor, *board_name;
+	int i, err = (force) ? 1 : -ENODEV;
+
+	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+	if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
+		return err;
+
+	board_name = dmi_get_system_info(DMI_BOARD_NAME);
+	if (!board_name)
+		return err;
+
+	for (i = 0; abituguru3_motherboards[i].id; i++) {
+		const char *dmi_name = abituguru3_motherboards[i].dmi_name;
+		if (dmi_name && !strcmp(dmi_name, board_name))
+			break;
+	}
+
+	if (!abituguru3_motherboards[i].id)
+		return 1;
+
+	return 0;
+}
+
+#else /* !CONFIG_DMI */
+
+static inline int abituguru3_dmi_detect(void)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_DMI */
+
+/* FIXME: Manual detection should die eventually; we need to collect stable
+ *        DMI model names first before we can rely entirely on CONFIG_DMI.
+ */
+
 static int __init abituguru3_detect(void)
 {
 	/* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
@@ -1119,7 +1171,7 @@ static int __init abituguru3_detect(void)
 	if (((data_val == 0x00) || (data_val == 0x08)) &&
 			((cmd_val == 0xAC) || (cmd_val == 0x05) ||
 			 (cmd_val == 0x55)))
-		return ABIT_UGURU3_BASE;
+		return 0;
 
 	ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
 		"0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
@@ -1127,7 +1179,7 @@ static int __init abituguru3_detect(void)
 	if (force) {
 		printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
 				"present because of \"force\" parameter\n");
-		return ABIT_UGURU3_BASE;
+		return 0;
 	}
 
 	/* No uGuru3 found */
@@ -1138,27 +1190,29 @@ static struct platform_device *abituguru3_pdev;
 
 static int __init abituguru3_init(void)
 {
-	int address, err;
 	struct resource res = { .flags = IORESOURCE_IO };
-
-#ifdef CONFIG_DMI
-	const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-
-	/* safety check, refuse to load on non Abit motherboards */
-	if (!force && (!board_vendor ||
-			strcmp(board_vendor, "http://www.abit.com.tw/")))
-		return -ENODEV;
-#endif
-
-	address = abituguru3_detect();
-	if (address < 0)
-		return address;
+	int err;
+
+	/* Attempt DMI detection first */
+	err = abituguru3_dmi_detect();
+	if (err < 0)
+		return err;
+
+	/* Fall back to manual detection if there was no exact
+	 * board name match, or force was specified.
+	 */
+	if (err > 0) {
+		err = abituguru3_detect();
+		if (err)
+			return err;
+	}
 
 	err = platform_driver_register(&abituguru3_driver);
 	if (err)
 		goto exit;
 
-	abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, address);
+	abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME,
+						ABIT_UGURU3_BASE);
 	if (!abituguru3_pdev) {
 		printk(KERN_ERR ABIT_UGURU3_NAME
 			": Device allocation failed\n");
@@ -1166,8 +1220,8 @@ static int __init abituguru3_init(void)
 		goto exit_driver_unregister;
 	}
 
-	res.start = address;
-	res.end = address + ABIT_UGURU3_REGION_LENGTH - 1;
+	res.start = ABIT_UGURU3_BASE;
+	res.end = ABIT_UGURU3_BASE + ABIT_UGURU3_REGION_LENGTH - 1;
 	res.name = ABIT_UGURU3_NAME;
 
 	err = platform_device_add_resources(abituguru3_pdev, &res, 1);
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
new file mode 100644
index 00000000000..bfda8c80ef2
--- /dev/null
+++ b/drivers/hwmon/ad7414.c
@@ -0,0 +1,268 @@
+/*
+ * An hwmon driver for the Analog Devices AD7414
+ *
+ * Copyright 2006 Stefan Roese <sr at denx.de>, DENX Software Engineering
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * Copyright (c) 2008 Spansion Inc.
+ *   Frank Edelhaeuser <frank.edelhaeuser at spansion.com>
+ *   (converted to "new style" I2C driver model, removed checkpatch.pl warnings)
+ *
+ * Based on ad7418.c
+ * Copyright 2006 Tower Technologies, Alessandro Zummo <a.zummo at towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+
+/* AD7414 registers */
+#define AD7414_REG_TEMP		0x00
+#define AD7414_REG_CONF		0x01
+#define AD7414_REG_T_HIGH	0x02
+#define AD7414_REG_T_LOW	0x03
+
+static u8 AD7414_REG_LIMIT[] = { AD7414_REG_T_HIGH, AD7414_REG_T_LOW };
+
+struct ad7414_data {
+	struct device		*hwmon_dev;
+	struct mutex		lock;	/* atomic read data updates */
+	char			valid;	/* !=0 if following fields are valid */
+	unsigned long		next_update;	/* In jiffies */
+	s16			temp_input;	/* Register values */
+	s8			temps[ARRAY_SIZE(AD7414_REG_LIMIT)];
+};
+
+/* REG: (0.25C/bit, two's complement) << 6 */
+static inline int ad7414_temp_from_reg(s16 reg)
+{
+	/* use integer division instead of equivalent right shift to
+	 * guarantee arithmetic shift and preserve the sign
+	 */
+	return ((int)reg / 64) * 250;
+}
+
+static inline int ad7414_read(struct i2c_client *client, u8 reg)
+{
+	if (reg == AD7414_REG_TEMP) {
+		int value = i2c_smbus_read_word_data(client, reg);
+		return (value < 0) ? value : swab16(value);
+	} else
+		return i2c_smbus_read_byte_data(client, reg);
+}
+
+static inline int ad7414_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static struct ad7414_data *ad7414_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ad7414_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->lock);
+
+	if (time_after(jiffies, data->next_update) || !data->valid) {
+		int value, i;
+
+		dev_dbg(&client->dev, "starting ad7414 update\n");
+
+		value = ad7414_read(client, AD7414_REG_TEMP);
+		if (value < 0)
+			dev_dbg(&client->dev, "AD7414_REG_TEMP err %d\n",
+				value);
+		else
+			data->temp_input = value;
+
+		for (i = 0; i < ARRAY_SIZE(AD7414_REG_LIMIT); ++i) {
+			value = ad7414_read(client, AD7414_REG_LIMIT[i]);
+			if (value < 0)
+				dev_dbg(&client->dev, "AD7414 reg %d err %d\n",
+					AD7414_REG_LIMIT[i], value);
+			else
+				data->temps[i] = value;
+		}
+
+		data->next_update = jiffies + HZ + HZ / 2;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return data;
+}
+
+static ssize_t show_temp_input(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct ad7414_data *data = ad7414_update_device(dev);
+	return sprintf(buf, "%d\n", ad7414_temp_from_reg(data->temp_input));
+}
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0);
+
+static ssize_t show_max_min(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int index = to_sensor_dev_attr(attr)->index;
+	struct ad7414_data *data = ad7414_update_device(dev);
+	return sprintf(buf, "%d\n", data->temps[index] * 1000);
+}
+
+static ssize_t set_max_min(struct device *dev,
+			   struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ad7414_data *data = i2c_get_clientdata(client);
+	int index = to_sensor_dev_attr(attr)->index;
+	u8 reg = AD7414_REG_LIMIT[index];
+	long temp = simple_strtol(buf, NULL, 10);
+
+	temp = SENSORS_LIMIT(temp, -40000, 85000);
+	temp = (temp + (temp < 0 ? -500 : 500)) / 1000;
+
+	mutex_lock(&data->lock);
+	data->temps[index] = temp;
+	ad7414_write(client, reg, temp);
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+			  show_max_min, set_max_min, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+			  show_max_min, set_max_min, 1);
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct ad7414_data *data = ad7414_update_device(dev);
+	int value = (data->temp_input >> bitnr) & 1;
+	return sprintf(buf, "%d\n", value);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 4);
+
+static struct attribute *ad7414_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group ad7414_group = {
+	.attrs = ad7414_attributes,
+};
+
+static int ad7414_probe(struct i2c_client *client,
+			const struct i2c_device_id *dev_id)
+{
+	struct ad7414_data *data;
+	int conf;
+	int err = 0;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		goto exit;
+
+	data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->lock);
+
+	dev_info(&client->dev, "chip found\n");
+
+	/* Make sure the chip is powered up. */
+	conf = i2c_smbus_read_byte_data(client, AD7414_REG_CONF);
+	if (conf < 0)
+		dev_warn(&client->dev,
+			 "ad7414_probe unable to read config register.\n");
+	else {
+		conf &= ~(1 << 7);
+		i2c_smbus_write_byte_data(client, AD7414_REG_CONF, conf);
+	}
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &ad7414_group);
+	if (err)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &ad7414_group);
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int __devexit ad7414_remove(struct i2c_client *client)
+{
+	struct ad7414_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &ad7414_group);
+	kfree(data);
+	return 0;
+}
+
+static const struct i2c_device_id ad7414_id[] = {
+	{ "ad7414", 0 },
+	{}
+};
+
+static struct i2c_driver ad7414_driver = {
+	.driver = {
+		.name	= "ad7414",
+	},
+	.probe	= ad7414_probe,
+	.remove	= __devexit_p(ad7414_remove),
+	.id_table = ad7414_id,
+};
+
+static int __init ad7414_init(void)
+{
+	return i2c_add_driver(&ad7414_driver);
+}
+module_init(ad7414_init);
+
+static void __exit ad7414_exit(void)
+{
+	i2c_del_driver(&ad7414_driver);
+}
+module_exit(ad7414_exit);
+
+MODULE_AUTHOR("Stefan Roese <sr at denx.de>, "
+	      "Frank Edelhaeuser <frank.edelhaeuser at spansion.com>");
+
+MODULE_DESCRIPTION("AD7414 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/adcxx.c b/drivers/hwmon/adcxx.c
new file mode 100644
index 00000000000..242294db3db
--- /dev/null
+++ b/drivers/hwmon/adcxx.c
@@ -0,0 +1,329 @@
+/*
+ * adcxx.c
+ *
+ * The adcxx4s is an AD converter family from National Semiconductor (NS).
+ *
+ * Copyright (c) 2008 Marc Pignat <marc.pignat@hevs.ch>
+ *
+ * The adcxx4s communicates with a host processor via an SPI/Microwire Bus
+ * interface. This driver supports the whole family of devices with name
+ * ADC<bb><c>S<sss>, where
+ * * bb is the resolution in number of bits (8, 10, 12)
+ * * c is the number of channels (1, 2, 4, 8)
+ * * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS
+ *   and 101 for 1 MSPS)
+ *
+ * Complete datasheets are available at National's website here:
+ * http://www.national.com/ds/DC/ADC<bb><c>S<sss>.pdf
+ *
+ * Handling of 8, 10 and 12 bits converters are the same, the
+ * unavailable bits are 0 :)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+
+#define DRVNAME		"adcxx"
+
+struct adcxx {
+	struct device *hwmon_dev;
+	struct mutex lock;
+	u32 channels;
+	u32 reference; /* in millivolts */
+};
+
+/* sysfs hook function */
+static ssize_t adcxx_read(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	u8 tx_buf[2] = { attr->index << 3 }; /* other bits are don't care */
+	u8 rx_buf[2];
+	int status;
+	int value;
+
+	if (mutex_lock_interruptible(&adc->lock))
+		return -ERESTARTSYS;
+
+	status = spi_write_then_read(spi, tx_buf, sizeof(tx_buf),
+					rx_buf, sizeof(rx_buf));
+	if (status < 0) {
+		dev_warn(dev, "spi_write_then_read failed with status %d\n",
+				status);
+		goto out;
+	}
+
+	value = (rx_buf[0] << 8) + rx_buf[1];
+	dev_dbg(dev, "raw value = 0x%x\n", value);
+
+	value = value * adc->reference >> 12;
+	status = sprintf(buf, "%d\n", value);
+out:
+	mutex_unlock(&adc->lock);
+	return status;
+}
+
+static ssize_t adcxx_show_min(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	/* The minimum reference is 0 for this chip family */
+	return sprintf(buf, "0\n");
+}
+
+static ssize_t adcxx_show_max(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	u32 reference;
+
+	if (mutex_lock_interruptible(&adc->lock))
+		return -ERESTARTSYS;
+
+	reference = adc->reference;
+
+	mutex_unlock(&adc->lock);
+
+	return sprintf(buf, "%d\n", reference);
+}
+
+static ssize_t adcxx_set_max(struct device *dev,
+	struct device_attribute *devattr, const char *buf, size_t count)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	unsigned long value;
+
+	if (strict_strtoul(buf, 10, &value))
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&adc->lock))
+		return -ERESTARTSYS;
+
+	adc->reference = value;
+
+	mutex_unlock(&adc->lock);
+
+	return count;
+}
+
+static ssize_t adcxx_show_name(struct device *dev, struct device_attribute
+			      *devattr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+
+	return sprintf(buf, "adcxx%ds\n", adc->channels);
+}
+
+static struct sensor_device_attribute ad_input[] = {
+	SENSOR_ATTR(name, S_IRUGO, adcxx_show_name, NULL, 0),
+	SENSOR_ATTR(in_min, S_IRUGO, adcxx_show_min, NULL, 0),
+	SENSOR_ATTR(in_max, S_IWUSR | S_IRUGO, adcxx_show_max,
+					adcxx_set_max, 0),
+	SENSOR_ATTR(in0_input, S_IRUGO, adcxx_read, NULL, 0),
+	SENSOR_ATTR(in1_input, S_IRUGO, adcxx_read, NULL, 1),
+	SENSOR_ATTR(in2_input, S_IRUGO, adcxx_read, NULL, 2),
+	SENSOR_ATTR(in3_input, S_IRUGO, adcxx_read, NULL, 3),
+	SENSOR_ATTR(in4_input, S_IRUGO, adcxx_read, NULL, 4),
+	SENSOR_ATTR(in5_input, S_IRUGO, adcxx_read, NULL, 5),
+	SENSOR_ATTR(in6_input, S_IRUGO, adcxx_read, NULL, 6),
+	SENSOR_ATTR(in7_input, S_IRUGO, adcxx_read, NULL, 7),
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit adcxx_probe(struct spi_device *spi, int channels)
+{
+	struct adcxx *adc;
+	int status;
+	int i;
+
+	adc = kzalloc(sizeof *adc, GFP_KERNEL);
+	if (!adc)
+		return -ENOMEM;
+
+	/* set a default value for the reference */
+	adc->reference = 3300;
+	adc->channels = channels;
+	mutex_init(&adc->lock);
+
+	mutex_lock(&adc->lock);
+
+	dev_set_drvdata(&spi->dev, adc);
+
+	for (i = 0; i < 3 + adc->channels; i++) {
+		status = device_create_file(&spi->dev, &ad_input[i].dev_attr);
+		if (status) {
+			dev_err(&spi->dev, "device_create_file failed.\n");
+			goto out_err;
+		}
+	}
+
+	adc->hwmon_dev = hwmon_device_register(&spi->dev);
+	if (IS_ERR(adc->hwmon_dev)) {
+		dev_err(&spi->dev, "hwmon_device_register failed.\n");
+		status = PTR_ERR(adc->hwmon_dev);
+		goto out_err;
+	}
+
+	mutex_unlock(&adc->lock);
+	return 0;
+
+out_err:
+	for (i--; i >= 0; i--)
+		device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+	dev_set_drvdata(&spi->dev, NULL);
+	mutex_unlock(&adc->lock);
+	kfree(adc);
+	return status;
+}
+
+static int __devinit adcxx1s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 1);
+}
+
+static int __devinit adcxx2s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 2);
+}
+
+static int __devinit adcxx4s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 4);
+}
+
+static int __devinit adcxx8s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 8);
+}
+
+static int __devexit adcxx_remove(struct spi_device *spi)
+{
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	int i;
+
+	mutex_lock(&adc->lock);
+	hwmon_device_unregister(adc->hwmon_dev);
+	for (i = 0; i < 3 + adc->channels; i++)
+		device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+	dev_set_drvdata(&spi->dev, NULL);
+	mutex_unlock(&adc->lock);
+	kfree(adc);
+
+	return 0;
+}
+
+static struct spi_driver adcxx1s_driver = {
+	.driver = {
+		.name	= "adcxx1s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx1s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx2s_driver = {
+	.driver = {
+		.name	= "adcxx2s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx2s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx4s_driver = {
+	.driver = {
+		.name	= "adcxx4s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx4s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx8s_driver = {
+	.driver = {
+		.name	= "adcxx8s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx8s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static int __init init_adcxx(void)
+{
+	int status;
+	status = spi_register_driver(&adcxx1s_driver);
+	if (status)
+		goto reg_1_failed;
+
+	status = spi_register_driver(&adcxx2s_driver);
+	if (status)
+		goto reg_2_failed;
+
+	status = spi_register_driver(&adcxx4s_driver);
+	if (status)
+		goto reg_4_failed;
+
+	status = spi_register_driver(&adcxx8s_driver);
+	if (status)
+		goto reg_8_failed;
+
+	return status;
+
+reg_8_failed:
+	spi_unregister_driver(&adcxx4s_driver);
+reg_4_failed:
+	spi_unregister_driver(&adcxx2s_driver);
+reg_2_failed:
+	spi_unregister_driver(&adcxx1s_driver);
+reg_1_failed:
+	return status;
+}
+
+static void __exit exit_adcxx(void)
+{
+	spi_unregister_driver(&adcxx1s_driver);
+	spi_unregister_driver(&adcxx2s_driver);
+	spi_unregister_driver(&adcxx4s_driver);
+	spi_unregister_driver(&adcxx8s_driver);
+}
+
+module_init(init_adcxx);
+module_exit(exit_adcxx);
+
+MODULE_AUTHOR("Marc Pignat");
+MODULE_DESCRIPTION("National Semiconductor adcxx8sxxx Linux driver");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("adcxx1s");
+MODULE_ALIAS("adcxx2s");
+MODULE_ALIAS("adcxx4s");
+MODULE_ALIAS("adcxx8s");
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index ce4a7cb5a11..3a0b6313647 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -39,32 +39,20 @@ I2C_CLIENT_INSMOD_1(adt7473);
 #define ADT7473_REG_BASE_ADDR			0x20
 
 #define ADT7473_REG_VOLT_BASE_ADDR		0x21
-#define ADT7473_REG_VOLT_MAX_ADDR		0x22
 #define ADT7473_REG_VOLT_MIN_BASE_ADDR		0x46
-#define ADT7473_REG_VOLT_MIN_MAX_ADDR		0x49
 
 #define ADT7473_REG_TEMP_BASE_ADDR		0x25
-#define ADT7473_REG_TEMP_MAX_ADDR		0x27
 #define ADT7473_REG_TEMP_LIMITS_BASE_ADDR	0x4E
-#define ADT7473_REG_TEMP_LIMITS_MAX_ADDR	0x53
 #define ADT7473_REG_TEMP_TMIN_BASE_ADDR		0x67
-#define ADT7473_REG_TEMP_TMIN_MAX_ADDR		0x69
 #define ADT7473_REG_TEMP_TMAX_BASE_ADDR		0x6A
-#define ADT7473_REG_TEMP_TMAX_MAX_ADDR		0x6C
 
 #define ADT7473_REG_FAN_BASE_ADDR		0x28
-#define ADT7473_REG_FAN_MAX_ADDR		0x2F
 #define ADT7473_REG_FAN_MIN_BASE_ADDR		0x54
-#define ADT7473_REG_FAN_MIN_MAX_ADDR		0x5B
 
 #define ADT7473_REG_PWM_BASE_ADDR		0x30
-#define ADT7473_REG_PWM_MAX_ADDR		0x32
 #define	ADT7473_REG_PWM_MIN_BASE_ADDR		0x64
-#define ADT7473_REG_PWM_MIN_MAX_ADDR		0x66
 #define ADT7473_REG_PWM_MAX_BASE_ADDR		0x38
-#define ADT7473_REG_PWM_MAX_MAX_ADDR		0x3A
 #define ADT7473_REG_PWM_BHVR_BASE_ADDR		0x5C
-#define ADT7473_REG_PWM_BHVR_MAX_ADDR		0x5E
 #define		ADT7473_PWM_BHVR_MASK		0xE0
 #define		ADT7473_PWM_BHVR_SHIFT		5
 
@@ -102,7 +90,6 @@ I2C_CLIENT_INSMOD_1(adt7473);
 #define		ADT7473_FAN4_ALARM		0x20
 #define		ADT7473_R1T_SHORT		0x40
 #define		ADT7473_R2T_SHORT		0x80
-#define ADT7473_REG_MAX_ADDR			0x80
 
 #define ALARM2(x)	((x) << 8)
 
@@ -583,10 +570,9 @@ static ssize_t set_max_duty_at_crit(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adt7473_data *data = i2c_get_clientdata(client);
 	int temp = simple_strtol(buf, NULL, 10);
-	temp = temp && 0xFF;
 
 	mutex_lock(&data->lock);
-	data->max_duty_at_overheat = temp;
+	data->max_duty_at_overheat = !!temp;
 	reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
 	if (temp)
 		reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT;
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index aacc0c4b809..b06b8e090a2 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -98,6 +98,12 @@ static const char* temperature_sensors_sets[][36] = {
 	  "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S",
 	  "TM1P", "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P",
 	  "TM9S", "TN0H", "TS0C", NULL },
+/* Set 5: iMac */
+	{ "TC0D", "TA0P", "TG0P", "TG0D", "TG0H", "TH0P", "Tm0P", "TO0P",
+	  "Tp0C", NULL },
+/* Set 6: Macbook3 set */
+	{ "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TTF0", "TW0P", "Th0H",
+	  "Th0S", "Th1H", NULL },
 };
 
 /* List of keys used to read/write fan speeds */
@@ -1223,6 +1229,10 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
 	{ .accelerometer = 0, .light = 0, .temperature_set = 3 },
 /* MacPro: temperature set 4 */
 	{ .accelerometer = 0, .light = 0, .temperature_set = 4 },
+/* iMac: temperature set 5 */
+	{ .accelerometer = 0, .light = 0, .temperature_set = 5 },
+/* MacBook3: accelerometer and temperature set 6 */
+	{ .accelerometer = 1, .light = 0, .temperature_set = 6 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1232,10 +1242,14 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
 		(void*)&applesmc_dmi_data[0]},
-	{ applesmc_dmi_match, "Apple MacBook", {
+	{ applesmc_dmi_match, "Apple MacBook (v2)", {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") },
 		(void*)&applesmc_dmi_data[1]},
+	{ applesmc_dmi_match, "Apple MacBook (v3)", {
+	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
+		(void*)&applesmc_dmi_data[6]},
 	{ applesmc_dmi_match, "Apple MacBook", {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
@@ -1248,6 +1262,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
 		(void*)&applesmc_dmi_data[4]},
+	{ applesmc_dmi_match, "Apple iMac", {
+	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"iMac") },
+		(void*)&applesmc_dmi_data[5]},
 	{ .ident = NULL }
 };
 
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index d191118ba0c..d6b490d3e36 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -31,7 +31,7 @@
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
-MODULE_VERSION("0.6.2");
+MODULE_VERSION("0.6.3");
 MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
 
 #define ATXP1_VID	0x00
@@ -289,16 +289,16 @@ static int atxp1_detect(struct i2c_client *new_client, int kind,
 	if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
 	     (i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
 	     (i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
-	     (i2c_smbus_read_byte_data(new_client, 0xff) == 0) )) {
+	     (i2c_smbus_read_byte_data(new_client, 0xff) == 0)))
+		return -ENODEV;
 
-		/* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
-		 * showing the same as register 0x00 */
-		temp = i2c_smbus_read_byte_data(new_client, 0x00);
+	/* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
+	 * showing the same as register 0x00 */
+	temp = i2c_smbus_read_byte_data(new_client, 0x00);
 
-		if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
-			 (i2c_smbus_read_byte_data(new_client, 0x11) == temp) ))
-			return -ENODEV;
-	}
+	if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
+	      (i2c_smbus_read_byte_data(new_client, 0x11) == temp)))
+		return -ENODEV;
 
 	/* Get VRM */
 	temp = vid_which_vrm();
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 70239acecc8..93c17223b52 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -413,10 +413,11 @@ static int __init coretemp_init(void)
 	for_each_online_cpu(i) {
 		struct cpuinfo_x86 *c = &cpu_data(i);
 
-		/* check if family 6, models 0xe, 0xf, 0x16, 0x17 */
+		/* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
 		if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
 		    !((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
-			(c->x86_model == 0x16) || (c->x86_model == 0x17))) {
+			(c->x86_model == 0x16) || (c->x86_model == 0x17) ||
+			(c->x86_model == 0x1A))) {
 
 			/* supported CPU not found, but report the unknown
 			   family 6 CPU */
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 7673f65877e..cdb8311e4ef 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -1,11 +1,11 @@
 /*
- * dme1737.c - Driver for the SMSC DME1737, Asus A8000, and SMSC SCH311x
- *             Super-I/O chips integrated hardware monitoring features.
- * Copyright (c) 2007 Juerg Haefliger <juergh@gmail.com>
+ * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x and
+ *             SCH5027 Super-I/O chips integrated hardware monitoring features.
+ * Copyright (c) 2007, 2008 Juerg Haefliger <juergh@gmail.com>
  *
  * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access
- * the chip registers if a DME1737 (or A8000) is found and the ISA bus if a
- * SCH311x chip is found. Both types of chips have very similar hardware
+ * the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus
+ * if a SCH311x chip is found. Both types of chips have very similar hardware
  * monitoring capabilities but differ in the way they can be accessed.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -48,11 +48,19 @@ static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
+static int probe_all_addr;
+module_param(probe_all_addr, bool, 0);
+MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC "
+		 "addresses");
+
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
 
 /* Insmod parameters */
-I2C_CLIENT_INSMOD_1(dme1737);
+I2C_CLIENT_INSMOD_2(dme1737, sch5027);
+
+/* ISA chip types */
+enum isa_chips { sch311x = sch5027 + 1 };
 
 /* ---------------------------------------------------------------------
  * Registers
@@ -158,6 +166,7 @@ static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
 #define DME1737_VERSTEP		0x88
 #define DME1737_VERSTEP_MASK	0xf8
 #define SCH311X_DEVICE		0x8c
+#define SCH5027_VERSTEP		0x69
 
 /* Length of ISA address segment */
 #define DME1737_EXTENT	2
@@ -176,6 +185,8 @@ struct dme1737_data {
 	int valid;			/* !=0 if following fields are valid */
 	unsigned long last_update;	/* in jiffies */
 	unsigned long last_vbat;	/* in jiffies */
+	enum chips type;
+	const int *in_nominal;		/* pointer to IN_NOMINAL array */
 
 	u8 vid;
 	u8 pwm_rr_en;
@@ -210,20 +221,27 @@ struct dme1737_data {
 };
 
 /* Nominal voltage values */
-static const int IN_NOMINAL[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300};
+static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300,
+					 3300};
+static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300,
+					 3300};
+static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300,
+					 3300};
+#define IN_NOMINAL(type)	((type) == sch311x ? IN_NOMINAL_SCH311x : \
+				 (type) == sch5027 ? IN_NOMINAL_SCH5027 : \
+				 IN_NOMINAL_DME1737)
 
 /* Voltage input
  * Voltage inputs have 16 bits resolution, limit values have 8 bits
  * resolution. */
-static inline int IN_FROM_REG(int reg, int ix, int res)
+static inline int IN_FROM_REG(int reg, int nominal, int res)
 {
-	return (reg * IN_NOMINAL[ix] + (3 << (res - 3))) / (3 << (res - 2));
+	return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2));
 }
 
-static inline int IN_TO_REG(int val, int ix)
+static inline int IN_TO_REG(int val, int nominal)
 {
-	return SENSORS_LIMIT((val * 192 + IN_NOMINAL[ix] / 2) /
-			     IN_NOMINAL[ix], 0, 255);
+	return SENSORS_LIMIT((val * 192 + nominal / 2) / nominal, 0, 255);
 }
 
 /* Temperature input
@@ -552,7 +570,10 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 
 	/* Sample register contents every 1 sec */
 	if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
-		data->vid = dme1737_read(client, DME1737_REG_VID) & 0x3f;
+		if (data->type != sch5027) {
+			data->vid = dme1737_read(client, DME1737_REG_VID) &
+				0x3f;
+		}
 
 		/* In (voltage) registers */
 		for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
@@ -580,8 +601,10 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 					DME1737_REG_TEMP_MIN(ix));
 			data->temp_max[ix] = dme1737_read(client,
 					DME1737_REG_TEMP_MAX(ix));
-			data->temp_offset[ix] = dme1737_read(client,
-					DME1737_REG_TEMP_OFFSET(ix));
+			if (data->type != sch5027) {
+				data->temp_offset[ix] = dme1737_read(client,
+						DME1737_REG_TEMP_OFFSET(ix));
+			}
 		}
 
 		/* In and temp LSB registers
@@ -656,9 +679,11 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 			data->zone_abs[ix] = dme1737_read(client,
 					DME1737_REG_ZONE_ABS(ix));
 		}
-		for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) {
-			data->zone_hyst[ix] = dme1737_read(client,
+		if (data->type != sch5027) {
+			for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) {
+				data->zone_hyst[ix] = dme1737_read(client,
 						DME1737_REG_ZONE_HYST(ix));
+			}
 		}
 
 		/* Alarm registers */
@@ -722,13 +747,13 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr,
 
 	switch (fn) {
 	case SYS_IN_INPUT:
-		res = IN_FROM_REG(data->in[ix], ix, 16);
+		res = IN_FROM_REG(data->in[ix], data->in_nominal[ix], 16);
 		break;
 	case SYS_IN_MIN:
-		res = IN_FROM_REG(data->in_min[ix], ix, 8);
+		res = IN_FROM_REG(data->in_min[ix], data->in_nominal[ix], 8);
 		break;
 	case SYS_IN_MAX:
-		res = IN_FROM_REG(data->in_max[ix], ix, 8);
+		res = IN_FROM_REG(data->in_max[ix], data->in_nominal[ix], 8);
 		break;
 	case SYS_IN_ALARM:
 		res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01;
@@ -755,12 +780,12 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr,
 	mutex_lock(&data->update_lock);
 	switch (fn) {
 	case SYS_IN_MIN:
-		data->in_min[ix] = IN_TO_REG(val, ix);
+		data->in_min[ix] = IN_TO_REG(val, data->in_nominal[ix]);
 		dme1737_write(client, DME1737_REG_IN_MIN(ix),
 			      data->in_min[ix]);
 		break;
 	case SYS_IN_MAX:
-		data->in_max[ix] = IN_TO_REG(val, ix);
+		data->in_max[ix] = IN_TO_REG(val, data->in_nominal[ix]);
 		dme1737_write(client, DME1737_REG_IN_MAX(ix),
 			      data->in_max[ix]);
 		break;
@@ -1153,7 +1178,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
 	return sprintf(buf, "%d\n", res);
 }
 
-static struct attribute *dme1737_attr_pwm[];
+static struct attribute *dme1737_pwm_chmod_attr[];
 static void dme1737_chmod_file(struct device*, struct attribute*, mode_t);
 
 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
@@ -1217,7 +1242,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 		switch (val) {
 		case 0:
 			/* Change permissions of pwm[ix] to read-only */
-			dme1737_chmod_file(dev, dme1737_attr_pwm[ix],
+			dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
 					   S_IRUGO);
 			/* Turn fan fully on */
 			data->pwm_config[ix] = PWM_EN_TO_REG(0,
@@ -1232,12 +1257,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 			dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
 				      data->pwm_config[ix]);
 			/* Change permissions of pwm[ix] to read-writeable */
-			dme1737_chmod_file(dev, dme1737_attr_pwm[ix],
+			dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
 					   S_IRUGO | S_IWUSR);
 			break;
 		case 2:
 			/* Change permissions of pwm[ix] to read-only */
-			dme1737_chmod_file(dev, dme1737_attr_pwm[ix],
+			dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
 					   S_IRUGO);
 			/* Turn on auto mode using the saved zone channel
 			 * assignment */
@@ -1501,9 +1526,9 @@ SENSOR_DEVICE_ATTR_PWM_1TO3(3);
 /* PWMs 5-6 */
 
 #define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \
-static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO | S_IWUSR, \
+static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
 	show_pwm, set_pwm, SYS_PWM, ix-1); \
-static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
 	show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
 static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
 	show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
@@ -1517,225 +1542,286 @@ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);   /* for ISA devices */
 
-#define SENSOR_DEV_ATTR_IN(ix) \
-&sensor_dev_attr_in##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_in##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_in##ix##_max.dev_attr.attr, \
-&sensor_dev_attr_in##ix##_alarm.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_TEMP_LOCK(ix) \
-&sensor_dev_attr_temp##ix##_offset.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_TEMP(ix) \
-SENSOR_DEV_ATTR_TEMP_LOCK(ix), \
-&sensor_dev_attr_temp##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_max.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_alarm.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_fault.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_ZONE_LOCK(ix) \
-&sensor_dev_attr_zone##ix##_auto_point1_temp_hyst.dev_attr.attr, \
-&sensor_dev_attr_zone##ix##_auto_point1_temp.dev_attr.attr, \
-&sensor_dev_attr_zone##ix##_auto_point2_temp.dev_attr.attr, \
-&sensor_dev_attr_zone##ix##_auto_point3_temp.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_ZONE(ix) \
-SENSOR_DEV_ATTR_ZONE_LOCK(ix), \
-&sensor_dev_attr_zone##ix##_auto_channels_temp.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_FAN_1TO4(ix) \
-&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_type.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_FAN_5TO6(ix) \
-&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_max.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix) \
-&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_ramp_rate.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_channels_zone.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_pwm_min.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_point1_pwm.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_PWM_1TO3(ix) \
-SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix), \
-&sensor_dev_attr_pwm##ix.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_point2_pwm.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix) \
-&sensor_dev_attr_pwm##ix.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_PWM_5TO6(ix) \
-SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix), \
-&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr
-
 /* This struct holds all the attributes that are always present and need to be
  * created unconditionally. The attributes that need modification of their
  * permissions are created read-only and write permissions are added or removed
  * on the fly when required */
 static struct attribute *dme1737_attr[] ={
 	/* Voltages */
-	SENSOR_DEV_ATTR_IN(0),
-	SENSOR_DEV_ATTR_IN(1),
-	SENSOR_DEV_ATTR_IN(2),
-	SENSOR_DEV_ATTR_IN(3),
-	SENSOR_DEV_ATTR_IN(4),
-	SENSOR_DEV_ATTR_IN(5),
-	SENSOR_DEV_ATTR_IN(6),
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_alarm.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in4_alarm.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in5_min.dev_attr.attr,
+	&sensor_dev_attr_in5_max.dev_attr.attr,
+	&sensor_dev_attr_in5_alarm.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in6_min.dev_attr.attr,
+	&sensor_dev_attr_in6_max.dev_attr.attr,
+	&sensor_dev_attr_in6_alarm.dev_attr.attr,
+	/* Temperatures */
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_fault.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_fault.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_fault.dev_attr.attr,
+	/* Zones */
+	&sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_group = {
+	.attrs = dme1737_attr,
+};
+
+/* The following struct holds misc attributes, which are not available in all
+ * chips. Their creation depends on the chip type which is determined during
+ * module load. */
+static struct attribute *dme1737_misc_attr[] = {
 	/* Temperatures */
-	SENSOR_DEV_ATTR_TEMP(1),
-	SENSOR_DEV_ATTR_TEMP(2),
-	SENSOR_DEV_ATTR_TEMP(3),
+	&sensor_dev_attr_temp1_offset.dev_attr.attr,
+	&sensor_dev_attr_temp2_offset.dev_attr.attr,
+	&sensor_dev_attr_temp3_offset.dev_attr.attr,
 	/* Zones */
-	SENSOR_DEV_ATTR_ZONE(1),
-	SENSOR_DEV_ATTR_ZONE(2),
-	SENSOR_DEV_ATTR_ZONE(3),
+	&sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
 	/* Misc */
 	&dev_attr_vrm.attr,
 	&dev_attr_cpu0_vid.attr,
 	NULL
 };
 
-static const struct attribute_group dme1737_group = {
-	.attrs = dme1737_attr,
+static const struct attribute_group dme1737_misc_group = {
+	.attrs = dme1737_misc_attr,
 };
 
 /* The following structs hold the PWM attributes, some of which are optional.
  * Their creation depends on the chip configuration which is determined during
  * module load. */
-static struct attribute *dme1737_attr_pwm1[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3(1),
+static struct attribute *dme1737_pwm1_attr[] = {
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm2[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3(2),
+static struct attribute *dme1737_pwm2_attr[] = {
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm3[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3(3),
+static struct attribute *dme1737_pwm3_attr[] = {
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm5[] = {
-	SENSOR_DEV_ATTR_PWM_5TO6(5),
+static struct attribute *dme1737_pwm5_attr[] = {
+	&sensor_dev_attr_pwm5.dev_attr.attr,
+	&sensor_dev_attr_pwm5_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm5_enable.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm6[] = {
-	SENSOR_DEV_ATTR_PWM_5TO6(6),
+static struct attribute *dme1737_pwm6_attr[] = {
+	&sensor_dev_attr_pwm6.dev_attr.attr,
+	&sensor_dev_attr_pwm6_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm6_enable.dev_attr.attr,
 	NULL
 };
 
 static const struct attribute_group dme1737_pwm_group[] = {
-	{ .attrs = dme1737_attr_pwm1 },
-	{ .attrs = dme1737_attr_pwm2 },
-	{ .attrs = dme1737_attr_pwm3 },
+	{ .attrs = dme1737_pwm1_attr },
+	{ .attrs = dme1737_pwm2_attr },
+	{ .attrs = dme1737_pwm3_attr },
 	{ .attrs = NULL },
-	{ .attrs = dme1737_attr_pwm5 },
-	{ .attrs = dme1737_attr_pwm6 },
+	{ .attrs = dme1737_pwm5_attr },
+	{ .attrs = dme1737_pwm6_attr },
+};
+
+/* The following struct holds misc PWM attributes, which are not available in
+ * all chips. Their creation depends on the chip type which is determined
+ * during module load. */
+static struct attribute *dme1737_pwm_misc_attr[] = {
+	&sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
 };
 
 /* The following structs hold the fan attributes, some of which are optional.
  * Their creation depends on the chip configuration which is determined during
  * module load. */
-static struct attribute *dme1737_attr_fan1[] = {
-	SENSOR_DEV_ATTR_FAN_1TO4(1),
+static struct attribute *dme1737_fan1_attr[] = {
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan1_type.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_fan2[] = {
-	SENSOR_DEV_ATTR_FAN_1TO4(2),
+static struct attribute *dme1737_fan2_attr[] = {
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_type.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_fan3[] = {
-	SENSOR_DEV_ATTR_FAN_1TO4(3),
+static struct attribute *dme1737_fan3_attr[] = {
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_type.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_fan4[] = {
-	SENSOR_DEV_ATTR_FAN_1TO4(4),
+static struct attribute *dme1737_fan4_attr[] = {
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_type.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_fan5[] = {
-	SENSOR_DEV_ATTR_FAN_5TO6(5),
+static struct attribute *dme1737_fan5_attr[] = {
+	&sensor_dev_attr_fan5_input.dev_attr.attr,
+	&sensor_dev_attr_fan5_min.dev_attr.attr,
+	&sensor_dev_attr_fan5_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan5_max.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_fan6[] = {
-	SENSOR_DEV_ATTR_FAN_5TO6(6),
+static struct attribute *dme1737_fan6_attr[] = {
+	&sensor_dev_attr_fan6_input.dev_attr.attr,
+	&sensor_dev_attr_fan6_min.dev_attr.attr,
+	&sensor_dev_attr_fan6_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan6_max.dev_attr.attr,
 	NULL
 };
 
 static const struct attribute_group dme1737_fan_group[] = {
-	{ .attrs = dme1737_attr_fan1 },
-	{ .attrs = dme1737_attr_fan2 },
-	{ .attrs = dme1737_attr_fan3 },
-	{ .attrs = dme1737_attr_fan4 },
-	{ .attrs = dme1737_attr_fan5 },
-	{ .attrs = dme1737_attr_fan6 },
+	{ .attrs = dme1737_fan1_attr },
+	{ .attrs = dme1737_fan2_attr },
+	{ .attrs = dme1737_fan3_attr },
+	{ .attrs = dme1737_fan4_attr },
+	{ .attrs = dme1737_fan5_attr },
+	{ .attrs = dme1737_fan6_attr },
 };
 
-/* The permissions of all of the following attributes are changed to read-
+/* The permissions of the following zone attributes are changed to read-
  * writeable if the chip is *not* locked. Otherwise they stay read-only. */
-static struct attribute *dme1737_attr_lock[] = {
-	/* Temperatures */
-	SENSOR_DEV_ATTR_TEMP_LOCK(1),
-	SENSOR_DEV_ATTR_TEMP_LOCK(2),
-	SENSOR_DEV_ATTR_TEMP_LOCK(3),
-	/* Zones */
-	SENSOR_DEV_ATTR_ZONE_LOCK(1),
-	SENSOR_DEV_ATTR_ZONE_LOCK(2),
-	SENSOR_DEV_ATTR_ZONE_LOCK(3),
+static struct attribute *dme1737_zone_chmod_attr[] = {
+	&sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
 	NULL
 };
 
-static const struct attribute_group dme1737_lock_group = {
-	.attrs = dme1737_attr_lock,
+static const struct attribute_group dme1737_zone_chmod_group = {
+	.attrs = dme1737_zone_chmod_attr,
 };
 
 /* The permissions of the following PWM attributes are changed to read-
  * writeable if the chip is *not* locked and the respective PWM is available.
  * Otherwise they stay read-only. */
-static struct attribute *dme1737_attr_pwm1_lock[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3_LOCK(1),
+static struct attribute *dme1737_pwm1_chmod_attr[] = {
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm2_lock[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3_LOCK(2),
+static struct attribute *dme1737_pwm2_chmod_attr[] = {
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm3_lock[] = {
-	SENSOR_DEV_ATTR_PWM_1TO3_LOCK(3),
+static struct attribute *dme1737_pwm3_chmod_attr[] = {
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm5_lock[] = {
-	SENSOR_DEV_ATTR_PWM_5TO6_LOCK(5),
+static struct attribute *dme1737_pwm5_chmod_attr[] = {
+	&sensor_dev_attr_pwm5.dev_attr.attr,
+	&sensor_dev_attr_pwm5_freq.dev_attr.attr,
 	NULL
 };
-static struct attribute *dme1737_attr_pwm6_lock[] = {
-	SENSOR_DEV_ATTR_PWM_5TO6_LOCK(6),
+static struct attribute *dme1737_pwm6_chmod_attr[] = {
+	&sensor_dev_attr_pwm6.dev_attr.attr,
+	&sensor_dev_attr_pwm6_freq.dev_attr.attr,
 	NULL
 };
 
-static const struct attribute_group dme1737_pwm_lock_group[] = {
-	{ .attrs = dme1737_attr_pwm1_lock },
-	{ .attrs = dme1737_attr_pwm2_lock },
-	{ .attrs = dme1737_attr_pwm3_lock },
+static const struct attribute_group dme1737_pwm_chmod_group[] = {
+	{ .attrs = dme1737_pwm1_chmod_attr },
+	{ .attrs = dme1737_pwm2_chmod_attr },
+	{ .attrs = dme1737_pwm3_chmod_attr },
 	{ .attrs = NULL },
-	{ .attrs = dme1737_attr_pwm5_lock },
-	{ .attrs = dme1737_attr_pwm6_lock },
+	{ .attrs = dme1737_pwm5_chmod_attr },
+	{ .attrs = dme1737_pwm6_chmod_attr },
 };
 
 /* Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the
  * chip is not locked. Otherwise they are read-only. */
-static struct attribute *dme1737_attr_pwm[] = {
+static struct attribute *dme1737_pwm_chmod_attr[] = {
 	&sensor_dev_attr_pwm1.dev_attr.attr,
 	&sensor_dev_attr_pwm2.dev_attr.attr,
 	&sensor_dev_attr_pwm3.dev_attr.attr,
@@ -1809,9 +1895,17 @@ static void dme1737_remove_files(struct device *dev)
 		if (data->has_pwm & (1 << ix)) {
 			sysfs_remove_group(&dev->kobj,
 					   &dme1737_pwm_group[ix]);
+			if (data->type != sch5027 && ix < 3) {
+				sysfs_remove_file(&dev->kobj,
+						  dme1737_pwm_misc_attr[ix]);
+			}
 		}
 	}
 
+	if (data->type != sch5027) {
+		sysfs_remove_group(&dev->kobj, &dme1737_misc_group);
+	}
+
 	sysfs_remove_group(&dev->kobj, &dme1737_group);
 
 	if (!data->client.driver) {
@@ -1835,6 +1929,13 @@ static int dme1737_create_files(struct device *dev)
 		goto exit_remove;
 	}
 
+	/* Create misc sysfs attributes */
+	if ((data->type != sch5027) &&
+	    (err = sysfs_create_group(&dev->kobj,
+				      &dme1737_misc_group))) {
+		goto exit_remove;
+	}
+
 	/* Create fan sysfs attributes */
 	for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
 		if (data->has_fan & (1 << ix)) {
@@ -1852,6 +1953,11 @@ static int dme1737_create_files(struct device *dev)
 						&dme1737_pwm_group[ix]))) {
 				goto exit_remove;
 			}
+			if (data->type != sch5027 && ix < 3 &&
+			    (err = sysfs_create_file(&dev->kobj,
+						dme1737_pwm_misc_attr[ix]))) {
+				goto exit_remove;
+			}
 		}
 	}
 
@@ -1861,16 +1967,27 @@ static int dme1737_create_files(struct device *dev)
 		dev_info(dev, "Device is locked. Some attributes "
 			 "will be read-only.\n");
 	} else {
-		/* Change permissions of standard attributes */
-		dme1737_chmod_group(dev, &dme1737_lock_group,
+		/* Change permissions of zone sysfs attributes */
+		dme1737_chmod_group(dev, &dme1737_zone_chmod_group,
 				    S_IRUGO | S_IWUSR);
 
-		/* Change permissions of PWM attributes */
-		for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_lock_group); ix++) {
+		/* Change permissions of misc sysfs attributes */
+		if (data->type != sch5027) {
+			dme1737_chmod_group(dev, &dme1737_misc_group,
+					    S_IRUGO | S_IWUSR);
+		}
+
+		/* Change permissions of PWM sysfs attributes */
+		for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) {
 			if (data->has_pwm & (1 << ix)) {
 				dme1737_chmod_group(dev,
-						&dme1737_pwm_lock_group[ix],
+						&dme1737_pwm_chmod_group[ix],
+						S_IRUGO | S_IWUSR);
+				if (data->type != sch5027 && ix < 3) {
+					dme1737_chmod_file(dev,
+						dme1737_pwm_misc_attr[ix],
 						S_IRUGO | S_IWUSR);
+				}
 			}
 		}
 
@@ -1879,7 +1996,7 @@ static int dme1737_create_files(struct device *dev)
 			if ((data->has_pwm & (1 << ix)) &&
 			    (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) {
 				dme1737_chmod_file(dev,
-						dme1737_attr_pwm[ix],
+						dme1737_pwm_chmod_attr[ix],
 						S_IRUGO | S_IWUSR);
 			}
 		}
@@ -1900,6 +2017,9 @@ static int dme1737_init_device(struct device *dev)
 	int ix;
 	u8 reg;
 
+	/* Point to the right nominal voltages array */
+	data->in_nominal = IN_NOMINAL(data->type);
+
 	data->config = dme1737_read(client, DME1737_REG_CONFIG);
 	/* Inform if part is not monitoring/started */
 	if (!(data->config & 0x01)) {
@@ -2010,7 +2130,9 @@ static int dme1737_init_device(struct device *dev)
 	data->pwm_acz[2] = 4;	/* pwm3 -> zone3 */
 
 	/* Set VRM */
-	data->vrm = vid_which_vrm();
+	if (data->type != sch5027) {
+		data->vrm = vid_which_vrm();
+	}
 
 	return 0;
 }
@@ -2029,9 +2151,10 @@ static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data)
 	dme1737_sio_enter(sio_cip);
 
 	/* Check device ID
-	 * The DME1737 can return either 0x78 or 0x77 as its device ID. */
+	 * The DME1737 can return either 0x78 or 0x77 as its device ID.
+	 * The SCH5027 returns 0x89 as its device ID. */
 	reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20);
-	if (!(reg == 0x77 || reg == 0x78)) {
+	if (!(reg == 0x77 || reg == 0x78 || reg == 0x89)) {
 		err = -ENODEV;
 		goto exit;
 	}
@@ -2100,15 +2223,25 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address,
 		company = dme1737_read(client, DME1737_REG_COMPANY);
 		verstep = dme1737_read(client, DME1737_REG_VERSTEP);
 
-		if (!((company == DME1737_COMPANY_SMSC) &&
-		      ((verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP))) {
+		if (company == DME1737_COMPANY_SMSC &&
+		    (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
+			kind = dme1737;
+		} else if (company == DME1737_COMPANY_SMSC &&
+			   verstep == SCH5027_VERSTEP) {
+			kind = sch5027;
+		} else {
 			err = -ENODEV;
 			goto exit_kfree;
 		}
 	}
 
-	kind = dme1737;
-	name = "dme1737";
+	if (kind == sch5027) {
+		name = "sch5027";
+	} else {
+		kind = dme1737;
+		name = "dme1737";
+	}
+	data->type = kind;
 
 	/* Fill in the remaining client fields and put it into the global
 	 * list */
@@ -2120,8 +2253,9 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address,
 		goto exit_kfree;
 	}
 
-	dev_info(dev, "Found a DME1737 chip at 0x%02x (rev 0x%02x).\n",
-		 client->addr, verstep);
+	dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n",
+		 kind == sch5027 ? "SCH5027" : "DME1737", client->addr,
+		 verstep);
 
 	/* Initialize the DME1737 chip */
 	if ((err = dme1737_init_device(dev))) {
@@ -2293,14 +2427,18 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev)
 	client->addr = res->start;
 	platform_set_drvdata(pdev, data);
 
-	company = dme1737_read(client, DME1737_REG_COMPANY);
-	device = dme1737_read(client, DME1737_REG_DEVICE);
+	/* Skip chip detection if module is loaded with force_id parameter */
+	if (!force_id) {
+		company = dme1737_read(client, DME1737_REG_COMPANY);
+		device = dme1737_read(client, DME1737_REG_DEVICE);
 
-	if (!((company == DME1737_COMPANY_SMSC) &&
-	      (device == SCH311X_DEVICE))) {
-		err = -ENODEV;
-		goto exit_kfree;
+		if (!((company == DME1737_COMPANY_SMSC) &&
+		      (device == SCH311X_DEVICE))) {
+			err = -ENODEV;
+			goto exit_kfree;
+		}
 	}
+	data->type = sch311x;
 
 	/* Fill in the remaining client fields and initialize the mutex */
 	strlcpy(client->name, "sch311x", I2C_NAME_SIZE);
@@ -2377,7 +2515,10 @@ static int __init dme1737_init(void)
 	}
 
 	if (dme1737_isa_detect(0x2e, &addr) &&
-	    dme1737_isa_detect(0x4e, &addr)) {
+	    dme1737_isa_detect(0x4e, &addr) &&
+	    (!probe_all_addr ||
+	     (dme1737_isa_detect(0x162e, &addr) &&
+	      dme1737_isa_detect(0x164e, &addr)))) {
 		/* Return 0 if we didn't find an ISA device */
 		return 0;
 	}
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index cbeb4984b5c..67067e9a323 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -87,8 +87,6 @@ static inline void superio_enter(int base);
 static inline void superio_select(int base, int ld);
 static inline void superio_exit(int base);
 
-static inline u16 fan_from_reg ( u16 reg );
-
 struct f71882fg_data {
 	unsigned short addr;
 	struct device *hwmon_dev;
@@ -116,10 +114,6 @@ struct f71882fg_data {
 	u8	temp_diode_open;
 };
 
-static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg);
-static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg);
-static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val);
-
 /* Sysfs in*/
 static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
 	char *buf);
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 3330667280b..c54eff92be4 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -1,76 +1,82 @@
 /*
-    hwmon-vid.c - VID/VRM/VRD voltage conversions
-
-    Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz>
-
-    Partly imported from i2c-vid.h of the lm_sensors project
-    Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
-    With assistance from Trent Piepho <xyzzy@speakeasy.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * hwmon-vid.c - VID/VRM/VRD voltage conversions
+ *
+ * Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * Partly imported from i2c-vid.h of the lm_sensors project
+ * Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ * With assistance from Trent Piepho <xyzzy@speakeasy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/hwmon-vid.h>
 
 /*
-    Common code for decoding VID pins.
-
-    References:
-
-    For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines",
-    available at http://developer.intel.com/.
-
-    For VRD 10.0 and up, "VRD x.y Design Guide",
-    available at http://developer.intel.com/.
-
-    AMD Opteron processors don't follow the Intel specifications.
-    I'm going to "make up" 2.4 as the spec number for the Opterons.
-    No good reason just a mnemonic for the 24x Opteron processor
-    series.
-
-    Opteron VID encoding is:
-       00000  =  1.550 V
-       00001  =  1.525 V
-        . . . .
-       11110  =  0.800 V
-       11111  =  0.000 V (off)
-
-    The 17 specification is in fact Intel Mobile Voltage Positioning -
-    (IMVP-II). You can find more information in the datasheet of Max1718
-    http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
-
-    The 13 specification corresponds to the Intel Pentium M series. There
-    doesn't seem to be any named specification for these. The conversion
-    tables are detailed directly in the various Pentium M datasheets:
-    http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm
-
-    The 14 specification corresponds to Intel Core series. There
-    doesn't seem to be any named specification for these. The conversion
-    tables are detailed directly in the various Pentium Core datasheets:
-    http://www.intel.com/design/mobile/datashts/309221.htm
-
-    The 110 (VRM 11) specification corresponds to Intel Conroe based series.
-    http://www.intel.com/design/processor/applnots/313214.htm
-*/
-
-/* vrm is the VRM/VRD document version multiplied by 10.
-   val is the 4-bit or more VID code.
-   Returned value is in mV to avoid floating point in the kernel.
-   Some VID have some bits in uV scale, this is rounded to mV */
+ * Common code for decoding VID pins.
+ *
+ * References:
+ *
+ * For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines",
+ * available at http://developer.intel.com/.
+ *
+ * For VRD 10.0 and up, "VRD x.y Design Guide",
+ * available at http://developer.intel.com/.
+ *
+ * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * Table 74. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 24 in the functions below.
+ * These CPU models (K8 revision <= E) have 5 VID pins. See also:
+ * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf
+ *
+ * AMD NPT Family 0Fh Processors, AMD Publication 32559,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
+ * Table 71. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 25 in the functions below.
+ * These CPU models (K8 revision >= F) have 6 VID pins. See also:
+ * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf
+ *
+ * The 17 specification is in fact Intel Mobile Voltage Positioning -
+ * (IMVP-II). You can find more information in the datasheet of Max1718
+ * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
+ *
+ * The 13 specification corresponds to the Intel Pentium M series. There
+ * doesn't seem to be any named specification for these. The conversion
+ * tables are detailed directly in the various Pentium M datasheets:
+ * http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm
+ *
+ * The 14 specification corresponds to Intel Core series. There
+ * doesn't seem to be any named specification for these. The conversion
+ * tables are detailed directly in the various Pentium Core datasheets:
+ * http://www.intel.com/design/mobile/datashts/309221.htm
+ *
+ * The 110 (VRM 11) specification corresponds to Intel Conroe based series.
+ * http://www.intel.com/design/processor/applnots/313214.htm
+ */
+
+/*
+ * vrm is the VRM/VRD document version multiplied by 10.
+ * val is the 4-bit or more VID code.
+ * Returned value is in mV to avoid floating point in the kernel.
+ * Some VID have some bits in uV scale, this is rounded to mV.
+ */
 int vid_from_reg(int val, u8 vrm)
 {
 	int vid;
@@ -96,9 +102,16 @@ int vid_from_reg(int val, u8 vrm)
 		if (val < 0x02 || val > 0xb2)
 			return 0;
 		return((1600000 - (val - 2) * 6250 + 500) / 1000);
-	case 24:                /* Opteron processor */
+
+	case 24:		/* Athlon64 & Opteron */
 		val &= 0x1f;
-		return(val == 0x1f ? 0 : 1550 - val * 25);
+		if (val == 0x1f)
+			return 0;
+				/* fall through */
+	case 25:		/* AMD NPT 0Fh */
+		val &= 0x3f;
+		return (val < 32) ? 1550 - 25 * val
+			: 775 - (25 * (val - 31)) / 2;
 
 	case 91:		/* VRM 9.1 */
 	case 90:		/* VRM 9.0 */
@@ -141,9 +154,9 @@ int vid_from_reg(int val, u8 vrm)
 
 
 /*
-    After this point is the code to automatically determine which
-    VRM/VRD specification should be used depending on the CPU.
-*/
+ * After this point is the code to automatically determine which
+ * VRM/VRD specification should be used depending on the CPU.
+ */
 
 struct vrm_model {
 	u8 vendor;
@@ -157,11 +170,16 @@ struct vrm_model {
 
 #ifdef CONFIG_X86
 
-/* the stepping parameter is highest acceptable stepping for current line */
+/*
+ * The stepping parameter is highest acceptable stepping for current line.
+ * The model match must be exact for 4-bit values. For model values 0x10
+ * and above (extended model), all models below the parameter will match.
+ */
 
 static struct vrm_model vrm_models[] = {
 	{X86_VENDOR_AMD, 0x6, ANY, ANY, 90},		/* Athlon Duron etc */
-	{X86_VENDOR_AMD, 0xF, ANY, ANY, 24},		/* Athlon 64, Opteron and above VRM 24 */
+	{X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24},		/* Athlon 64, Opteron */
+	{X86_VENDOR_AMD, 0xF, ANY, ANY, 25},		/* NPT family 0Fh */
 	{X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13},		/* Pentium M (130 nm) */
 	{X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85},		/* Tualatin */
 	{X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13},		/* Pentium M (90 nm) */
@@ -189,6 +207,8 @@ static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor)
 		if (vrm_models[i].vendor==vendor)
 			if ((vrm_models[i].eff_family==eff_family)
 			 && ((vrm_models[i].eff_model==eff_model) ||
+			     (vrm_models[i].eff_model >= 0x10 &&
+			      eff_model <= vrm_models[i].eff_model) ||
 			     (vrm_models[i].eff_model==ANY)) &&
 			     (eff_stepping <= vrm_models[i].eff_stepping))
 				return vrm_models[i].vrm_type;
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index f9e2ed621f7..2ede9388096 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -81,6 +81,8 @@ static unsigned long amb_reg_temp(unsigned int amb)
 #define MAX_AMBS_PER_CHANNEL		16
 #define MAX_AMBS			(MAX_MEM_CHANNELS * \
 					 MAX_AMBS_PER_CHANNEL)
+#define CHANNEL_SHIFT			4
+#define DIMM_MASK			0xF
 /*
  * Ugly hack: For some reason the highest bit is set if there
  * are _any_ DIMMs in the channel.  Attempting to read from
@@ -89,7 +91,7 @@ static unsigned long amb_reg_temp(unsigned int amb)
  * might prevent us from seeing the 16th DIMM in the channel.
  */
 #define REAL_MAX_AMBS_PER_CHANNEL	15
-#define KNOBS_PER_AMB			5
+#define KNOBS_PER_AMB			6
 
 static unsigned long amb_num_from_reg(unsigned int byte_num, unsigned int bit)
 {
@@ -238,6 +240,16 @@ static ssize_t show_amb_temp(struct device *dev,
 		500 * amb_read_byte(data, amb_reg_temp(attr->index)));
 }
 
+static ssize_t show_label(struct device *dev,
+			  struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return sprintf(buf, "Ch. %d DIMM %d\n", attr->index >> CHANNEL_SHIFT,
+		       attr->index & DIMM_MASK);
+}
+
 static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 {
 	int i, j, k, d = 0;
@@ -268,6 +280,20 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 				continue;
 			d++;
 
+			/* sysfs label */
+			iattr = data->attrs + data->num_attrs;
+			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+				 "temp%d_label", d);
+			iattr->s_attr.dev_attr.attr.name = iattr->name;
+			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
+			iattr->s_attr.dev_attr.show = show_label;
+			iattr->s_attr.index = k;
+			res = device_create_file(&pdev->dev,
+						 &iattr->s_attr.dev_attr);
+			if (res)
+				goto exit_remove;
+			data->num_attrs++;
+
 			/* Temperature sysfs knob */
 			iattr = data->attrs + data->num_attrs;
 			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index c9416e65748..0f70dc20410 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -1,6 +1,6 @@
 /*
- * A hwmon driver for the IBM Active Energy Manager temperature/power sensors
- * and capping functionality.
+ * A hwmon driver for the IBM System Director Active Energy Manager (AEM)
+ * temperature/power/energy sensors and capping functionality.
  * Copyright (C) 2008 IBM
  *
  * Author: Darrick J. Wong <djwong@us.ibm.com>
@@ -463,12 +463,18 @@ static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg,
 }
 
 /* Update AEM energy registers */
+static void update_aem_energy_one(struct aem_data *data, int which)
+{
+	aem_read_sensor(data, AEM_ENERGY_ELEMENT, which,
+			&data->energy[which], 8);
+}
+
 static void update_aem_energy(struct aem_data *data)
 {
-	aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8);
+	update_aem_energy_one(data, 0);
 	if (data->ver_major < 2)
 		return;
-	aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8);
+	update_aem_energy_one(data, 1);
 }
 
 /* Update all AEM1 sensors */
@@ -676,7 +682,8 @@ static int aem_find_aem2(struct aem_ipmi_data *data,
 		return -ETIMEDOUT;
 
 	if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) ||
-	    memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)))
+	    memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)) ||
+	    fi_resp->num_instances <= instance_num)
 		return -ENOENT;
 
 	return 0;
@@ -849,7 +856,7 @@ static ssize_t aem_show_power(struct device *dev,
 	struct timespec b, a;
 
 	mutex_lock(&data->lock);
-	update_aem_energy(data);
+	update_aem_energy_one(data, attr->index);
 	getnstimeofday(&b);
 	before = data->energy[attr->index];
 
@@ -861,7 +868,7 @@ static ssize_t aem_show_power(struct device *dev,
 		return 0;
 	}
 
-	update_aem_energy(data);
+	update_aem_energy_one(data, attr->index);
 	getnstimeofday(&a);
 	after = data->energy[attr->index];
 	mutex_unlock(&data->lock);
@@ -880,7 +887,9 @@ static ssize_t aem_show_energy(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct aem_data *a = dev_get_drvdata(dev);
-	a->update(a);
+	mutex_lock(&a->lock);
+	update_aem_energy_one(a, attr->index);
+	mutex_unlock(&a->lock);
 
 	return sprintf(buf, "%llu\n",
 			(unsigned long long)a->energy[attr->index] * 1000);
@@ -1104,7 +1113,7 @@ static void __exit aem_exit(void)
 }
 
 MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
-MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver");
+MODULE_DESCRIPTION("IBM AEM power/temp/energy sensor driver");
 MODULE_LICENSE("GPL");
 
 module_init(aem_init);
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index e12c132ff83..f1133081cc4 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -151,9 +151,9 @@ static int fix_pwm_polarity;
 /* The IT8718F has the VID value in a different register, in Super-I/O
    configuration space. */
 #define IT87_REG_VID           0x0a
-/* Warning: register 0x0b is used for something completely different in
-   new chips/revisions. I suspect only 16-bit tachometer mode will work
-   for these. */
+/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
+   for fan divisors. Later IT8712F revisions must use 16-bit tachometer
+   mode. */
 #define IT87_REG_FAN_DIV       0x0b
 #define IT87_REG_FAN_16BIT     0x0c
 
@@ -234,6 +234,7 @@ static const unsigned int pwm_freq[8] = {
 struct it87_sio_data {
 	enum chips type;
 	/* Values read from Super-I/O config space */
+	u8 revision;
 	u8 vid_value;
 };
 
@@ -242,6 +243,7 @@ struct it87_sio_data {
 struct it87_data {
 	struct device *hwmon_dev;
 	enum chips type;
+	u8 revision;
 
 	unsigned short addr;
 	const char *name;
@@ -268,6 +270,16 @@ struct it87_data {
 	u8 manual_pwm_ctl[3];   /* manual PWM value set by user */
 };
 
+static inline int has_16bit_fans(const struct it87_data *data)
+{
+	/* IT8705F Datasheet 0.4.1, 3h == Version G.
+	   IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
+	   These are the first revisions with 16bit tachometer support. */
+	return (data->type == it87 && data->revision >= 0x03)
+	    || (data->type == it8712 && data->revision >= 0x08)
+	    || data->type == it8716
+	    || data->type == it8718;
+}
 
 static int it87_probe(struct platform_device *pdev);
 static int __devexit it87_remove(struct platform_device *pdev);
@@ -991,8 +1003,9 @@ static int __init it87_find(unsigned short *address,
 	}
 
 	err = 0;
+	sio_data->revision = superio_inb(DEVREV) & 0x0f;
 	pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
-		chip_type, *address, superio_inb(DEVREV) & 0x0f);
+		chip_type, *address, sio_data->revision);
 
 	/* Read GPIO config and VID value from LDN 7 (GPIO) */
 	if (chip_type != IT8705F_DEVID) {
@@ -1045,6 +1058,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
 
 	data->addr = res->start;
 	data->type = sio_data->type;
+	data->revision = sio_data->revision;
 	data->name = names[sio_data->type];
 
 	/* Now, we do the remaining detection. */
@@ -1069,7 +1083,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
 		goto ERROR2;
 
 	/* Do not create fan files for disabled fans */
-	if (data->type == it8716 || data->type == it8718) {
+	if (has_16bit_fans(data)) {
 		/* 16-bit tachometers */
 		if (data->has_fan & (1 << 0)) {
 			if ((err = device_create_file(dev,
@@ -1350,7 +1364,7 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 	data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
 
 	/* Set tachometers to 16-bit mode if needed */
-	if (data->type == it8716 || data->type == it8718) {
+	if (has_16bit_fans(data)) {
 		tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
 		if (~tmp & 0x07 & data->has_fan) {
 			dev_dbg(&pdev->dev,
@@ -1358,10 +1372,13 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 			it87_write_value(data, IT87_REG_FAN_16BIT,
 					 tmp | 0x07);
 		}
-		if (tmp & (1 << 4))
-			data->has_fan |= (1 << 3);	/* fan4 enabled */
-		if (tmp & (1 << 5))
-			data->has_fan |= (1 << 4);	/* fan5 enabled */
+		/* IT8705F only supports three fans. */
+		if (data->type != it87) {
+			if (tmp & (1 << 4))
+				data->has_fan |= (1 << 3); /* fan4 enabled */
+			if (tmp & (1 << 5))
+				data->has_fan |= (1 << 4); /* fan5 enabled */
+		}
 	}
 
 	/* Set current fan mode registers and the default settings for the
@@ -1426,7 +1443,7 @@ static struct it87_data *it87_update_device(struct device *dev)
 			data->fan[i] = it87_read_value(data,
 				       IT87_REG_FAN[i]);
 			/* Add high byte if in 16-bit mode */
-			if (data->type == it8716 || data->type == it8718) {
+			if (has_16bit_fans(data)) {
 				data->fan[i] |= it87_read_value(data,
 						IT87_REG_FANX[i]) << 8;
 				data->fan_min[i] |= it87_read_value(data,
@@ -1443,8 +1460,7 @@ static struct it87_data *it87_update_device(struct device *dev)
 		}
 
 		/* Newer chips don't have clock dividers */
-		if ((data->has_fan & 0x07) && data->type != it8716
-		 && data->type != it8718) {
+		if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
 			i = it87_read_value(data, IT87_REG_FAN_DIV);
 			data->fan_div[0] = i & 0x07;
 			data->fan_div[1] = (i >> 3) & 0x07;
@@ -1460,7 +1476,8 @@ static struct it87_data *it87_update_device(struct device *dev)
 		data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
 
 		data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
-		/* The 8705 does not have VID capability */
+		/* The 8705 does not have VID capability.
+		   The 8718 does not use IT87_REG_VID for the same purpose. */
 		if (data->type == it8712 || data->type == it8716) {
 			data->vid = it87_read_value(data, IT87_REG_VID);
 			/* The older IT8712F revisions had only 5 VID pins,
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index de698dc7302..8f9595f2fb5 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -30,14 +30,37 @@
 #include "lm75.h"
 
 
-/* Addresses to scan */
+/*
+ * This driver handles the LM75 and compatible digital temperature sensors.
+ * Only types which are _not_ listed in I2C_CLIENT_INSMOD_*() need to be
+ * listed here.  We start at 9 since I2C_CLIENT_INSMOD_*() currently allow
+ * definition of up to 8 chip types (plus zero).
+ */
+
+enum lm75_type {		/* keep sorted in alphabetical order */
+	ds1775 = 9,
+	ds75,
+	/* lm75 -- in I2C_CLIENT_INSMOD_1() */
+	lm75a,
+	max6625,
+	max6626,
+	mcp980x,
+	stds75,
+	tcn75,
+	tmp100,
+	tmp101,
+	tmp175,
+	tmp275,
+	tmp75,
+};
+
+/* Addresses scanned */
 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
 					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(lm75);
 
-/* Many LM75 constants specified below */
 
 /* The LM75 registers */
 #define LM75_REG_CONF		0x01
@@ -49,10 +72,10 @@ static const u8 LM75_REG_TEMP[3] = {
 
 /* Each client has this additional data */
 struct lm75_data {
-	struct i2c_client	client;
-	struct device *hwmon_dev;
+	struct device		*hwmon_dev;
 	struct mutex		update_lock;
-	char			valid;		/* !=0 if following fields are valid */
+	u8			orig_conf;
+	char			valid;		/* !=0 if registers are valid */
 	unsigned long		last_updated;	/* In jiffies */
 	u16			temp[3];	/* Register values,
 						   0 = input
@@ -60,23 +83,14 @@ struct lm75_data {
 						   2 = hyst */
 };
 
-static int lm75_attach_adapter(struct i2c_adapter *adapter);
-static int lm75_detect(struct i2c_adapter *adapter, int address, int kind);
-static void lm75_init_client(struct i2c_client *client);
-static int lm75_detach_client(struct i2c_client *client);
 static int lm75_read_value(struct i2c_client *client, u8 reg);
 static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
 static struct lm75_data *lm75_update_device(struct device *dev);
 
 
-/* This is the driver that will be inserted */
-static struct i2c_driver lm75_driver = {
-	.driver = {
-		.name	= "lm75",
-	},
-	.attach_adapter	= lm75_attach_adapter,
-	.detach_client	= lm75_detach_client,
-};
+/*-----------------------------------------------------------------------*/
+
+/* sysfs attributes for hwmon */
 
 static ssize_t show_temp(struct device *dev, struct device_attribute *da,
 			 char *buf)
@@ -109,13 +123,6 @@ static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
 			show_temp, set_temp, 2);
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
 
-static int lm75_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm75_detect);
-}
-
 static struct attribute *lm75_attributes[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -128,33 +135,114 @@ static const struct attribute_group lm75_group = {
 	.attrs = lm75_attributes,
 };
 
-/* This function is called by i2c_probe */
-static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
+/*-----------------------------------------------------------------------*/
+
+/* device probe and removal */
+
+static int
+lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
-	int i;
-	struct i2c_client *new_client;
 	struct lm75_data *data;
-	int err = 0;
-	const char *name = "";
+	int status;
+	u8 set_mask, clr_mask;
+	int new;
 
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
-				     I2C_FUNC_SMBUS_WORD_DATA))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access lm75_{read,write}_value. */
-	if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
+	if (!i2c_check_functionality(client->adapter,
+			I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
+		return -EIO;
+
+	data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
+	/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
+	 * Then tweak to be more precise when appropriate.
+	 */
+	set_mask = 0;
+	clr_mask = (1 << 0)			/* continuous conversions */
+		| (1 << 6) | (1 << 5);		/* 9-bit mode */
+
+	/* configure as specified */
+	status = lm75_read_value(client, LM75_REG_CONF);
+	if (status < 0) {
+		dev_dbg(&client->dev, "Can't read config? %d\n", status);
+		goto exit_free;
 	}
+	data->orig_conf = status;
+	new = status & ~clr_mask;
+	new |= set_mask;
+	if (status != new)
+		lm75_write_value(client, LM75_REG_CONF, new);
+	dev_dbg(&client->dev, "Config %02x\n", new);
+
+	/* Register sysfs hooks */
+	status = sysfs_create_group(&client->dev.kobj, &lm75_group);
+	if (status)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		status = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	dev_info(&client->dev, "%s: sensor '%s'\n",
+		data->hwmon_dev->bus_id, client->name);
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &lm75_group);
+exit_free:
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return status;
+}
+
+static int lm75_remove(struct i2c_client *client)
+{
+	struct lm75_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &lm75_group);
+	lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return 0;
+}
+
+static const struct i2c_device_id lm75_ids[] = {
+	{ "ds1775", ds1775, },
+	{ "ds75", ds75, },
+	{ "lm75", lm75, },
+	{ "lm75a", lm75a, },
+	{ "max6625", max6625, },
+	{ "max6626", max6626, },
+	{ "mcp980x", mcp980x, },
+	{ "stds75", stds75, },
+	{ "tcn75", tcn75, },
+	{ "tmp100", tmp100, },
+	{ "tmp101", tmp101, },
+	{ "tmp175", tmp175, },
+	{ "tmp275", tmp275, },
+	{ "tmp75", tmp75, },
+	{ /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, lm75_ids);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm75_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = new_client->adapter;
+	int i;
 
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm75_driver;
-	new_client->flags = 0;
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
 
 	/* Now, we do the remaining detection. There is no identification-
 	   dedicated register so we have to rely on several tricks:
@@ -174,77 +262,49 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
 		 || i2c_smbus_read_word_data(new_client, 5) != hyst
 		 || i2c_smbus_read_word_data(new_client, 6) != hyst
 		 || i2c_smbus_read_word_data(new_client, 7) != hyst)
-		 	goto exit_free;
+			return -ENODEV;
 		os = i2c_smbus_read_word_data(new_client, 3);
 		if (i2c_smbus_read_word_data(new_client, 4) != os
 		 || i2c_smbus_read_word_data(new_client, 5) != os
 		 || i2c_smbus_read_word_data(new_client, 6) != os
 		 || i2c_smbus_read_word_data(new_client, 7) != os)
-		 	goto exit_free;
+			return -ENODEV;
 
 		/* Unused bits */
 		if (conf & 0xe0)
-		 	goto exit_free;
+			return -ENODEV;
 
 		/* Addresses cycling */
 		for (i = 8; i < 0xff; i += 8)
 			if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
 			 || i2c_smbus_read_word_data(new_client, i + 2) != hyst
 			 || i2c_smbus_read_word_data(new_client, i + 3) != os)
-				goto exit_free;
+				return -ENODEV;
 	}
 
-	/* Determine the chip type - only one kind supported! */
-	if (kind <= 0)
-		kind = lm75;
-
-	if (kind == lm75) {
-		name = "lm75";
-	}
-
-	/* Fill in the remaining client fields and put it into the global list */
-	strlcpy(new_client->name, name, I2C_NAME_SIZE);
-	data->valid = 0;
-	mutex_init(&data->update_lock);
-
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
-	/* Initialize the LM75 chip */
-	lm75_init_client(new_client);
-	
-	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group)))
-		goto exit_detach;
-
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove;
-	}
+	/* NOTE: we treat "force=..." and "force_lm75=..." the same.
+	 * Only new-style driver binding distinguishes chip types.
+	 */
+	strlcpy(info->type, "lm75", I2C_NAME_SIZE);
 
 	return 0;
-
-exit_remove:
-	sysfs_remove_group(&new_client->dev.kobj, &lm75_group);
-exit_detach:
-	i2c_detach_client(new_client);
-exit_free:
-	kfree(data);
-exit:
-	return err;
 }
 
-static int lm75_detach_client(struct i2c_client *client)
-{
-	struct lm75_data *data = i2c_get_clientdata(client);
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &lm75_group);
-	i2c_detach_client(client);
-	kfree(data);
-	return 0;
-}
+static struct i2c_driver lm75_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "lm75",
+	},
+	.probe		= lm75_probe,
+	.remove		= lm75_remove,
+	.id_table	= lm75_ids,
+	.detect		= lm75_detect,
+	.address_data	= &addr_data,
+};
+
+/*-----------------------------------------------------------------------*/
+
+/* register access */
 
 /* All registers are word-sized, except for the configuration register.
    LM75 uses a high-byte first convention, which is exactly opposite to
@@ -268,16 +328,6 @@ static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
 		return i2c_smbus_write_word_data(client, reg, swab16(value));
 }
 
-static void lm75_init_client(struct i2c_client *client)
-{
-	int reg;
-
-	/* Enable if in shutdown mode */
-	reg = lm75_read_value(client, LM75_REG_CONF);
-	if (reg >= 0 && (reg & 0x01))
-		lm75_write_value(client, LM75_REG_CONF, reg & 0xfe);
-}
-
 static struct lm75_data *lm75_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -309,6 +359,10 @@ static struct lm75_data *lm75_update_device(struct device *dev)
 	return data;
 }
 
+/*-----------------------------------------------------------------------*/
+
+/* module glue */
+
 static int __init sensors_lm75_init(void)
 {
 	return i2c_add_driver(&lm75_driver);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index ee5eca1c192..12d446f54f9 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -1,7 +1,7 @@
 /*
     lm85.c - Part of lm_sensors, Linux kernel modules for hardware
              monitoring
-    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
     Copyright (c) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
     Copyright (c) 2003        Margit Schubert-While <margitsw@t-online.de>
     Copyright (c) 2004        Justin Thiessen <jthiessen@penguincomputing.com>
@@ -51,24 +51,17 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 #define	LM85_REG_TEMP_MAX(nr)		(0x4f + (nr) * 2)
 
 /* Fan speeds are LSB, MSB (2 bytes) */
-#define	LM85_REG_FAN(nr)		(0x28 + (nr) *2)
-#define	LM85_REG_FAN_MIN(nr)		(0x54 + (nr) *2)
+#define	LM85_REG_FAN(nr)		(0x28 + (nr) * 2)
+#define	LM85_REG_FAN_MIN(nr)		(0x54 + (nr) * 2)
 
 #define	LM85_REG_PWM(nr)		(0x30 + (nr))
 
-#define	ADT7463_REG_OPPOINT(nr)		(0x33 + (nr))
-
-#define	ADT7463_REG_TMIN_CTL1		0x36
-#define	ADT7463_REG_TMIN_CTL2		0x37
-
-#define	LM85_REG_DEVICE			0x3d
 #define	LM85_REG_COMPANY		0x3e
 #define	LM85_REG_VERSTEP		0x3f
 /* These are the recognized values for the above regs */
-#define	LM85_DEVICE_ADX			0x27
 #define	LM85_COMPANY_NATIONAL		0x01
 #define	LM85_COMPANY_ANALOG_DEV		0x41
-#define	LM85_COMPANY_SMSC      		0x5c
+#define	LM85_COMPANY_SMSC		0x5c
 #define	LM85_VERSTEP_VMASK              0xf0
 #define	LM85_VERSTEP_GENERIC		0x60
 #define	LM85_VERSTEP_LM85C		0x60
@@ -91,58 +84,45 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 #define	LM85_REG_AFAN_CONFIG(nr)	(0x5c + (nr))
 #define	LM85_REG_AFAN_RANGE(nr)		(0x5f + (nr))
 #define	LM85_REG_AFAN_SPIKE1		0x62
-#define	LM85_REG_AFAN_SPIKE2		0x63
 #define	LM85_REG_AFAN_MINPWM(nr)	(0x64 + (nr))
 #define	LM85_REG_AFAN_LIMIT(nr)		(0x67 + (nr))
 #define	LM85_REG_AFAN_CRITICAL(nr)	(0x6a + (nr))
 #define	LM85_REG_AFAN_HYST1		0x6d
 #define	LM85_REG_AFAN_HYST2		0x6e
 
-#define	LM85_REG_TACH_MODE		0x74
-#define	LM85_REG_SPINUP_CTL		0x75
-
-#define	ADM1027_REG_TEMP_OFFSET(nr)	(0x70 + (nr))
-#define	ADM1027_REG_CONFIG2		0x73
-#define	ADM1027_REG_INTMASK1		0x74
-#define	ADM1027_REG_INTMASK2		0x75
 #define	ADM1027_REG_EXTEND_ADC1		0x76
 #define	ADM1027_REG_EXTEND_ADC2		0x77
-#define	ADM1027_REG_CONFIG3		0x78
-#define	ADM1027_REG_FAN_PPR		0x7b
-
-#define	ADT7463_REG_THERM		0x79
-#define	ADT7463_REG_THERM_LIMIT		0x7A
 
 #define EMC6D100_REG_ALARM3             0x7d
 /* IN5, IN6 and IN7 */
-#define	EMC6D100_REG_IN(nr)             (0x70 + ((nr)-5))
-#define	EMC6D100_REG_IN_MIN(nr)         (0x73 + ((nr)-5) * 2)
-#define	EMC6D100_REG_IN_MAX(nr)         (0x74 + ((nr)-5) * 2)
+#define	EMC6D100_REG_IN(nr)             (0x70 + ((nr) - 5))
+#define	EMC6D100_REG_IN_MIN(nr)         (0x73 + ((nr) - 5) * 2)
+#define	EMC6D100_REG_IN_MAX(nr)         (0x74 + ((nr) - 5) * 2)
 #define	EMC6D102_REG_EXTEND_ADC1	0x85
 #define	EMC6D102_REG_EXTEND_ADC2	0x86
 #define	EMC6D102_REG_EXTEND_ADC3	0x87
 #define	EMC6D102_REG_EXTEND_ADC4	0x88
 
 
-/* Conversions. Rounding and limit checking is only done on the TO_REG 
+/* Conversions. Rounding and limit checking is only done on the TO_REG
    variants. Note that you should be a bit careful with which arguments
    these macros are called: arguments may be evaluated more than once.
  */
 
 /* IN are scaled acording to built-in resistors */
-static int lm85_scaling[] = {  /* .001 Volts */
-		2500, 2250, 3300, 5000, 12000,
-		3300, 1500, 1800 /*EMC6D100*/
-	};
-#define SCALE(val,from,to)		(((val)*(to) + ((from)/2))/(from))
+static const int lm85_scaling[] = {  /* .001 Volts */
+	2500, 2250, 3300, 5000, 12000,
+	3300, 1500, 1800 /*EMC6D100*/
+};
+#define SCALE(val, from, to)	(((val) * (to) + ((from) / 2)) / (from))
 
-#define INS_TO_REG(n,val)	\
-		SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
+#define INS_TO_REG(n, val)	\
+		SENSORS_LIMIT(SCALE(val, lm85_scaling[n], 192), 0, 255)
 
-#define INSEXT_FROM_REG(n,val,ext)	\
+#define INSEXT_FROM_REG(n, val, ext)	\
 		SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n])
 
-#define INS_FROM_REG(n,val)	SCALE((val), 192, lm85_scaling[n])
+#define INS_FROM_REG(n, val)	SCALE((val), 192, lm85_scaling[n])
 
 /* FAN speed is measured using 90kHz clock */
 static inline u16 FAN_TO_REG(unsigned long val)
@@ -151,16 +131,17 @@ static inline u16 FAN_TO_REG(unsigned long val)
 		return 0xffff;
 	return SENSORS_LIMIT(5400000 / val, 1, 0xfffe);
 }
-#define FAN_FROM_REG(val)	((val)==0?-1:(val)==0xffff?0:5400000/(val))
+#define FAN_FROM_REG(val)	((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
+				 5400000 / (val))
 
 /* Temperature is reported in .001 degC increments */
 #define TEMP_TO_REG(val)	\
-		SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
-#define TEMPEXT_FROM_REG(val,ext)	\
+		SENSORS_LIMIT(SCALE(val, 1000, 1), -127, 127)
+#define TEMPEXT_FROM_REG(val, ext)	\
 		SCALE(((val) << 4) + (ext), 16, 1000)
 #define TEMP_FROM_REG(val)	((val) * 1000)
 
-#define PWM_TO_REG(val)			(SENSORS_LIMIT(val,0,255))
+#define PWM_TO_REG(val)			SENSORS_LIMIT(val, 0, 255)
 #define PWM_FROM_REG(val)		(val)
 
 
@@ -183,17 +164,17 @@ static inline u16 FAN_TO_REG(unsigned long val)
  */
 
 /* These are the zone temperature range encodings in .001 degree C */
-static int lm85_range_map[] = {   
-		2000,  2500,  3300,  4000,  5000,  6600,
-		8000, 10000, 13300, 16000, 20000, 26600,
-		32000, 40000, 53300, 80000
-	};
-static int RANGE_TO_REG( int range )
+static const int lm85_range_map[] = {
+	2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000,
+	13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000
+};
+
+static int RANGE_TO_REG(int range)
 {
 	int i;
 
 	if (range >= lm85_range_map[15])
-		return 15 ;
+		return 15;
 
 	/* Find the closest match */
 	for (i = 14; i >= 0; --i) {
@@ -207,28 +188,25 @@ static int RANGE_TO_REG( int range )
 
 	return 0;
 }
-#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
+#define RANGE_FROM_REG(val)	lm85_range_map[(val) & 0x0f]
 
-/* These are the Acoustic Enhancement, or Temperature smoothing encodings
- * NOTE: The enable/disable bit is INCLUDED in these encodings as the
- *       MSB (bit 3, value 8).  If the enable bit is 0, the encoded value
- *       is ignored, or set to 0.
- */
 /* These are the PWM frequency encodings */
-static int lm85_freq_map[] = { /* .1 Hz */
-		100, 150, 230, 300, 380, 470, 620, 940
-	};
-static int FREQ_TO_REG( int freq )
+static const int lm85_freq_map[] = { /* .1 Hz */
+	100, 150, 230, 300, 380, 470, 620, 940
+};
+
+static int FREQ_TO_REG(int freq)
 {
 	int i;
 
-	if( freq >= lm85_freq_map[7] ) { return 7 ; }
-	for( i = 0 ; i < 7 ; ++i )
-		if( freq <= lm85_freq_map[i] )
-			break ;
-	return( i & 0x07 );
+	if (freq >= lm85_freq_map[7])
+		return 7;
+	for (i = 0; i < 7; ++i)
+		if (freq <= lm85_freq_map[i])
+			break;
+	return i;
 }
-#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07])
+#define FREQ_FROM_REG(val)	lm85_freq_map[(val) & 0x07]
 
 /* Since we can't use strings, I'm abusing these numbers
  *   to stand in for the following meanings:
@@ -242,30 +220,23 @@ static int FREQ_TO_REG( int freq )
  *     -2 -- PWM responds to manual control
  */
 
-static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
-#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07])
+static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
+#define ZONE_FROM_REG(val)	lm85_zone_map[(val) >> 5]
 
-static int ZONE_TO_REG( int zone )
+static int ZONE_TO_REG(int zone)
 {
 	int i;
 
-	for( i = 0 ; i <= 7 ; ++i )
-		if( zone == lm85_zone_map[i] )
-			break ;
-	if( i > 7 )   /* Not found. */
+	for (i = 0; i <= 7; ++i)
+		if (zone == lm85_zone_map[i])
+			break;
+	if (i > 7)   /* Not found. */
 		i = 3;  /* Always 100% */
-	return( (i & 0x07)<<5 );
+	return i << 5;
 }
 
-#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15))
-#define HYST_FROM_REG(val) ((val)*1000)
-
-#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127))
-#define OFFSET_FROM_REG(val) ((val)*25)
-
-#define PPR_MASK(fan) (0x03<<(fan *2))
-#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2))
-#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1)
+#define HYST_TO_REG(val)	SENSORS_LIMIT(((val) + 500) / 1000, 0, 15)
+#define HYST_FROM_REG(val)	((val) * 1000)
 
 /* Chip sampling rates
  *
@@ -292,11 +263,11 @@ struct lm85_zone {
 	u8 hyst;	/* Low limit hysteresis. (0-15) */
 	u8 range;	/* Temp range, encoded */
 	s8 critical;	/* "All fans ON" temp limit */
-	u8 off_desired; /* Actual "off" temperature specified.  Preserved 
+	u8 off_desired; /* Actual "off" temperature specified.  Preserved
 			 * to prevent "drift" as other autofan control
 			 * values change.
 			 */
-	u8 max_desired; /* Actual "max" temperature specified.  Preserved 
+	u8 max_desired; /* Actual "max" temperature specified.  Preserved
 			 * to prevent "drift" as other autofan control
 			 * values change.
 			 */
@@ -327,23 +298,13 @@ struct lm85_data {
 	s8 temp[3];		/* Register value */
 	s8 temp_min[3];		/* Register value */
 	s8 temp_max[3];		/* Register value */
-	s8 temp_offset[3];	/* Register value */
 	u16 fan[4];		/* Register value */
 	u16 fan_min[4];		/* Register value */
 	u8 pwm[3];		/* Register value */
-	u8 spinup_ctl;		/* Register encoding, combined */
-	u8 tach_mode;		/* Register encoding, combined */
 	u8 temp_ext[3];		/* Decoded values */
 	u8 in_ext[8];		/* Decoded values */
-	u8 fan_ppr;		/* Register value */
-	u8 smooth[3];		/* Register encoding */
 	u8 vid;			/* Register value */
 	u8 vrm;			/* VRM version */
-	u8 syncpwm3;		/* Saved PWM3 for TACH 2,3,4 config */
-	u8 oppoint[3];		/* Register value */
-	u16 tmin_ctl;		/* Register value */
-	unsigned long therm_total; /* Cummulative therm count */
-	u8 therm_limit;		/* Register value */
 	u32 alarms;		/* Register encoding, combined */
 	struct lm85_autofan autofan[3];
 	struct lm85_zone zone[3];
@@ -355,9 +316,8 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
 static int lm85_detach_client(struct i2c_client *client);
 
 static int lm85_read_value(struct i2c_client *client, u8 reg);
-static int lm85_write_value(struct i2c_client *client, u8 reg, int value);
+static void lm85_write_value(struct i2c_client *client, u8 reg, int value);
 static struct lm85_data *lm85_update_device(struct device *dev);
-static void lm85_init_client(struct i2c_client *client);
 
 
 static struct i2c_driver lm85_driver = {
@@ -375,7 +335,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) );
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr]));
 }
 
 static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
@@ -383,7 +343,7 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) );
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr]));
 }
 
 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
@@ -414,7 +374,8 @@ show_fan_offset(4);
 
 /* vid, vrm, alarms */
 
-static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
+		char *buf)
 {
 	struct lm85_data *data = lm85_update_device(dev);
 	int vid;
@@ -432,13 +393,15 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, c
 
 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 
-static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr,
+		char *buf)
 {
 	struct lm85_data *data = dev_get_drvdata(dev);
 	return sprintf(buf, "%ld\n", (long) data->vrm);
 }
 
-static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
 {
 	struct lm85_data *data = dev_get_drvdata(dev);
 	data->vrm = simple_strtoul(buf, NULL, 10);
@@ -447,7 +410,8 @@ static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
 
-static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_alarms_reg(struct device *dev, struct device_attribute
+		*attr, char *buf)
 {
 	struct lm85_data *data = lm85_update_device(dev);
 	return sprintf(buf, "%u\n", data->alarms);
@@ -488,7 +452,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) );
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
 }
 
 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
@@ -581,17 +545,16 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(	buf, "%d\n", INSEXT_FROM_REG(nr,
-						     data->in[nr],
-						     data->in_ext[nr]));
+	return sprintf(buf, "%d\n", INSEXT_FROM_REG(nr, data->in[nr],
+						    data->in_ext[nr]));
 }
 
-static ssize_t show_in_min(struct device *dev,  struct device_attribute *attr,
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) );
+	return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr]));
 }
 
 static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
@@ -614,7 +577,7 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) );
+	return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr]));
 }
 
 static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
@@ -656,8 +619,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
-						    data->temp_ext[nr]));
+	return sprintf(buf, "%d\n", TEMPEXT_FROM_REG(data->temp[nr],
+						     data->temp_ext[nr]));
 }
 
 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
@@ -665,7 +628,7 @@ static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) );
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
 }
 
 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
@@ -688,7 +651,7 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) );
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
 }
 
 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
@@ -697,7 +660,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm85_data *data = i2c_get_clientdata(client);
-	long val = simple_strtol(buf, NULL, 10);	
+	long val = simple_strtol(buf, NULL, 10);
 
 	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = TEMP_TO_REG(val);
@@ -726,7 +689,7 @@ static ssize_t show_pwm_auto_channels(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config));
+	return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config));
 }
 
 static ssize_t set_pwm_auto_channels(struct device *dev,
@@ -735,11 +698,11 @@ static ssize_t set_pwm_auto_channels(struct device *dev,
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm85_data *data = i2c_get_clientdata(client);
-	long val = simple_strtol(buf, NULL, 10);   
+	long val = simple_strtol(buf, NULL, 10);
 
 	mutex_lock(&data->update_lock);
 	data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
-		| ZONE_TO_REG(val) ;
+		| ZONE_TO_REG(val);
 	lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
 		data->autofan[nr].config);
 	mutex_unlock(&data->update_lock);
@@ -751,7 +714,7 @@ static ssize_t show_pwm_auto_pwm_min(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
 }
 
 static ssize_t set_pwm_auto_pwm_min(struct device *dev,
@@ -775,7 +738,7 @@ static ssize_t show_pwm_auto_pwm_minctl(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", data->autofan[nr].min_off);
+	return sprintf(buf, "%d\n", data->autofan[nr].min_off);
 }
 
 static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
@@ -785,15 +748,15 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm85_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
+	u8 tmp;
 
 	mutex_lock(&data->update_lock);
 	data->autofan[nr].min_off = val;
-	lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0]
-		| data->syncpwm3
-		| (data->autofan[0].min_off ? 0x20 : 0)
-		| (data->autofan[1].min_off ? 0x40 : 0)
-		| (data->autofan[2].min_off ? 0x80 : 0)
-	);
+	tmp = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+	tmp &= ~(0x20 << nr);
+	if (data->autofan[nr].min_off)
+		tmp |= 0x20 << nr;
+	lm85_write_value(client, LM85_REG_AFAN_SPIKE1, tmp);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -803,7 +766,7 @@ static ssize_t show_pwm_auto_pwm_freq(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
+	return sprintf(buf, "%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
 }
 
 static ssize_t set_pwm_auto_pwm_freq(struct device *dev,
@@ -818,8 +781,7 @@ static ssize_t set_pwm_auto_pwm_freq(struct device *dev,
 	data->autofan[nr].freq = FREQ_TO_REG(val);
 	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
 		(data->zone[nr].range << 4)
-		| data->autofan[nr].freq
-	); 
+		| data->autofan[nr].freq);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -849,7 +811,7 @@ static ssize_t show_temp_auto_temp_off(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
 		HYST_FROM_REG(data->zone[nr].hyst));
 }
 
@@ -866,15 +828,13 @@ static ssize_t set_temp_auto_temp_off(struct device *dev,
 	min = TEMP_FROM_REG(data->zone[nr].limit);
 	data->zone[nr].off_desired = TEMP_TO_REG(val);
 	data->zone[nr].hyst = HYST_TO_REG(min - val);
-	if ( nr == 0 || nr == 1 ) {
+	if (nr == 0 || nr == 1) {
 		lm85_write_value(client, LM85_REG_AFAN_HYST1,
 			(data->zone[0].hyst << 4)
-			| data->zone[1].hyst
-			);
+			| data->zone[1].hyst);
 	} else {
 		lm85_write_value(client, LM85_REG_AFAN_HYST2,
-			(data->zone[2].hyst << 4)
-		);
+			(data->zone[2].hyst << 4));
 	}
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -885,7 +845,7 @@ static ssize_t show_temp_auto_temp_min(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) );
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit));
 }
 
 static ssize_t set_temp_auto_temp_min(struct device *dev,
@@ -913,15 +873,13 @@ static ssize_t set_temp_auto_temp_min(struct device *dev,
 	data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
 		data->zone[nr].limit) - TEMP_FROM_REG(
 		data->zone[nr].off_desired));
-	if ( nr == 0 || nr == 1 ) {
+	if (nr == 0 || nr == 1) {
 		lm85_write_value(client, LM85_REG_AFAN_HYST1,
 			(data->zone[0].hyst << 4)
-			| data->zone[1].hyst
-			);
+			| data->zone[1].hyst);
 	} else {
 		lm85_write_value(client, LM85_REG_AFAN_HYST2,
-			(data->zone[2].hyst << 4)
-		);
+			(data->zone[2].hyst << 4));
 	}
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -932,7 +890,7 @@ static ssize_t show_temp_auto_temp_max(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
 		RANGE_FROM_REG(data->zone[nr].range));
 }
 
@@ -962,11 +920,11 @@ static ssize_t show_temp_auto_temp_crit(struct device *dev,
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical));
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical));
 }
 
 static ssize_t set_temp_auto_temp_crit(struct device *dev,
-		struct device_attribute *attr,const char *buf, size_t count)
+		struct device_attribute *attr, const char *buf, size_t count)
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct i2c_client *client = to_i2c_client(dev);
@@ -1127,20 +1085,37 @@ static const struct attribute_group lm85_group_in567 = {
 	.attrs = lm85_attributes_in567,
 };
 
+static void lm85_init_client(struct i2c_client *client)
+{
+	int value;
+
+	/* Start monitoring if needed */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	if (!(value & 0x01)) {
+		dev_info(&client->dev, "Starting monitoring\n");
+		lm85_write_value(client, LM85_REG_CONFIG, value | 0x01);
+	}
+
+	/* Warn about unusual configuration bits */
+	if (value & 0x02)
+		dev_warn(&client->dev, "Device configuration is locked\n");
+	if (!(value & 0x04))
+		dev_warn(&client->dev, "Device is not ready\n");
+}
+
 static int lm85_detect(struct i2c_adapter *adapter, int address,
 		int kind)
 {
-	int company, verstep ;
-	struct i2c_client *new_client = NULL;
+	int company, verstep;
+	struct i2c_client *client;
 	struct lm85_data *data;
 	int err = 0;
-	const char *type_name = "";
+	const char *type_name;
 
-	if (!i2c_check_functionality(adapter,
-					I2C_FUNC_SMBUS_BYTE_DATA)) {
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		/* We need to be able to do byte I/O */
-		goto ERROR0 ;
-	};
+		goto ERROR0;
+	}
 
 	/* OK. For now, we presume we have a valid client. We now create the
 	   client structure, even though we cannot fill it completely yet.
@@ -1151,138 +1126,145 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
 		goto ERROR0;
 	}
 
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm85_driver;
-	new_client->flags = 0;
+	client = &data->client;
+	i2c_set_clientdata(client, data);
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &lm85_driver;
 
 	/* Now, we do the remaining detection. */
 
-	company = lm85_read_value(new_client, LM85_REG_COMPANY);
-	verstep = lm85_read_value(new_client, LM85_REG_VERSTEP);
+	company = lm85_read_value(client, LM85_REG_COMPANY);
+	verstep = lm85_read_value(client, LM85_REG_VERSTEP);
 
 	dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
 		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
-		i2c_adapter_id(new_client->adapter), new_client->addr,
+		i2c_adapter_id(client->adapter), client->addr,
 		company, verstep);
 
 	/* If auto-detecting, Determine the chip type. */
 	if (kind <= 0) {
 		dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n",
-			i2c_adapter_id(adapter), address );
-		if( company == LM85_COMPANY_NATIONAL
-		    && verstep == LM85_VERSTEP_LM85C ) {
-			kind = lm85c ;
-		} else if( company == LM85_COMPANY_NATIONAL
-		    && verstep == LM85_VERSTEP_LM85B ) {
-			kind = lm85b ;
-		} else if( company == LM85_COMPANY_NATIONAL
-		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+			i2c_adapter_id(adapter), address);
+		if (company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85C) {
+			kind = lm85c;
+		} else if (company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85B) {
+			kind = lm85b;
+		} else if (company == LM85_COMPANY_NATIONAL
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
 			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
 				" Defaulting to LM85.\n", verstep);
-			kind = any_chip ;
-		} else if( company == LM85_COMPANY_ANALOG_DEV
-		    && verstep == LM85_VERSTEP_ADM1027 ) {
-			kind = adm1027 ;
-		} else if( company == LM85_COMPANY_ANALOG_DEV
+			kind = any_chip;
+		} else if (company == LM85_COMPANY_ANALOG_DEV
+		    && verstep == LM85_VERSTEP_ADM1027) {
+			kind = adm1027;
+		} else if (company == LM85_COMPANY_ANALOG_DEV
 		    && (verstep == LM85_VERSTEP_ADT7463
-			 || verstep == LM85_VERSTEP_ADT7463C) ) {
-			kind = adt7463 ;
-		} else if( company == LM85_COMPANY_ANALOG_DEV
-		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+			 || verstep == LM85_VERSTEP_ADT7463C)) {
+			kind = adt7463;
+		} else if (company == LM85_COMPANY_ANALOG_DEV
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
 			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
-				" Defaulting to Generic LM85.\n", verstep );
-			kind = any_chip ;
-		} else if( company == LM85_COMPANY_SMSC
+				" Defaulting to Generic LM85.\n", verstep);
+			kind = any_chip;
+		} else if (company == LM85_COMPANY_SMSC
 		    && (verstep == LM85_VERSTEP_EMC6D100_A0
-			 || verstep == LM85_VERSTEP_EMC6D100_A1) ) {
+			 || verstep == LM85_VERSTEP_EMC6D100_A1)) {
 			/* Unfortunately, we can't tell a '100 from a '101
 			 * from the registers.  Since a '101 is a '100
 			 * in a package with fewer pins and therefore no
 			 * 3.3V, 1.5V or 1.8V inputs, perhaps if those
 			 * inputs read 0, then it's a '101.
 			 */
-			kind = emc6d100 ;
-		} else if( company == LM85_COMPANY_SMSC
+			kind = emc6d100;
+		} else if (company == LM85_COMPANY_SMSC
 		    && verstep == LM85_VERSTEP_EMC6D102) {
-			kind = emc6d102 ;
-		} else if( company == LM85_COMPANY_SMSC
+			kind = emc6d102;
+		} else if (company == LM85_COMPANY_SMSC
 		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
 			dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
 			dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
-			    " Defaulting to Generic LM85.\n", verstep );
-			kind = any_chip ;
-		} else if( kind == any_chip
+			    " Defaulting to Generic LM85.\n", verstep);
+			kind = any_chip;
+		} else if (kind == any_chip
 		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
 			dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n");
 			/* Leave kind as "any_chip" */
 		} else {
 			dev_dbg(&adapter->dev, "Autodetection failed\n");
-			/* Not an LM85 ... */
-			if( kind == any_chip ) {  /* User used force=x,y */
+			/* Not an LM85... */
+			if (kind == any_chip) {  /* User used force=x,y */
 				dev_err(&adapter->dev, "Generic LM85 Version 6 not"
 					" found at %d,0x%02x. Try force_lm85c.\n",
-					i2c_adapter_id(adapter), address );
+					i2c_adapter_id(adapter), address);
 			}
-			err = 0 ;
+			err = 0;
 			goto ERROR1;
 		}
 	}
 
 	/* Fill in the chip specific driver values */
-	if ( kind == any_chip ) {
-		type_name = "lm85";
-	} else if ( kind == lm85b ) {
+	switch (kind) {
+	case lm85b:
 		type_name = "lm85b";
-	} else if ( kind == lm85c ) {
+		break;
+	case lm85c:
 		type_name = "lm85c";
-	} else if ( kind == adm1027 ) {
+		break;
+	case adm1027:
 		type_name = "adm1027";
-	} else if ( kind == adt7463 ) {
+		break;
+	case adt7463:
 		type_name = "adt7463";
-	} else if ( kind == emc6d100){
+		break;
+	case emc6d100:
 		type_name = "emc6d100";
-	} else if ( kind == emc6d102 ) {
+		break;
+	case emc6d102:
 		type_name = "emc6d102";
+		break;
+	default:
+		type_name = "lm85";
 	}
-	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+	strlcpy(client->name, type_name, I2C_NAME_SIZE);
 
 	/* Fill in the remaining client fields */
 	data->type = kind;
-	data->valid = 0;
 	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
+	err = i2c_attach_client(client);
+	if (err)
 		goto ERROR1;
 
 	/* Set the VRM version */
 	data->vrm = vid_which_vrm();
 
 	/* Initialize the LM85 chip */
-	lm85_init_client(new_client);
+	lm85_init_client(client);
 
 	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm85_group)))
+	err = sysfs_create_group(&client->dev.kobj, &lm85_group);
+	if (err)
 		goto ERROR2;
 
 	/* The ADT7463 has an optional VRM 10 mode where pin 21 is used
 	   as a sixth digital VID input rather than an analog input. */
-	data->vid = lm85_read_value(new_client, LM85_REG_VID);
+	data->vid = lm85_read_value(client, LM85_REG_VID);
 	if (!(kind == adt7463 && (data->vid & 0x80)))
-		if ((err = sysfs_create_group(&new_client->dev.kobj,
+		if ((err = sysfs_create_group(&client->dev.kobj,
 					&lm85_group_in4)))
 			goto ERROR3;
 
 	/* The EMC6D100 has 3 additional voltage inputs */
 	if (kind == emc6d100)
-		if ((err = sysfs_create_group(&new_client->dev.kobj,
+		if ((err = sysfs_create_group(&client->dev.kobj,
 					&lm85_group_in567)))
 			goto ERROR3;
 
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
 		goto ERROR3;
@@ -1291,16 +1273,16 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
 	return 0;
 
 	/* Error out and cleanup code */
-    ERROR3:
-	sysfs_remove_group(&new_client->dev.kobj, &lm85_group);
-	sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in4);
+ ERROR3:
+	sysfs_remove_group(&client->dev.kobj, &lm85_group);
+	sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
 	if (kind == emc6d100)
-		sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in567);
-    ERROR2:
-	i2c_detach_client(new_client);
-    ERROR1:
+		sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
+ ERROR2:
+	i2c_detach_client(client);
+ ERROR1:
 	kfree(data);
-    ERROR0:
+ ERROR0:
 	return err;
 }
 
@@ -1323,100 +1305,46 @@ static int lm85_read_value(struct i2c_client *client, u8 reg)
 	int res;
 
 	/* What size location is it? */
-	switch( reg ) {
-	case LM85_REG_FAN(0) :  /* Read WORD data */
-	case LM85_REG_FAN(1) :
-	case LM85_REG_FAN(2) :
-	case LM85_REG_FAN(3) :
-	case LM85_REG_FAN_MIN(0) :
-	case LM85_REG_FAN_MIN(1) :
-	case LM85_REG_FAN_MIN(2) :
-	case LM85_REG_FAN_MIN(3) :
-	case LM85_REG_ALARM1 :	/* Read both bytes at once */
-		res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
-		res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
-		break ;
-	case ADT7463_REG_TMIN_CTL1 :  /* Read WORD MSB, LSB */
-		res = i2c_smbus_read_byte_data(client, reg) << 8 ;
-		res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ;
-		break ;
+	switch (reg) {
+	case LM85_REG_FAN(0):  /* Read WORD data */
+	case LM85_REG_FAN(1):
+	case LM85_REG_FAN(2):
+	case LM85_REG_FAN(3):
+	case LM85_REG_FAN_MIN(0):
+	case LM85_REG_FAN_MIN(1):
+	case LM85_REG_FAN_MIN(2):
+	case LM85_REG_FAN_MIN(3):
+	case LM85_REG_ALARM1:	/* Read both bytes at once */
+		res = i2c_smbus_read_byte_data(client, reg) & 0xff;
+		res |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
+		break;
 	default:	/* Read BYTE data */
 		res = i2c_smbus_read_byte_data(client, reg);
-		break ;
+		break;
 	}
 
-	return res ;
+	return res;
 }
 
-static int lm85_write_value(struct i2c_client *client, u8 reg, int value)
+static void lm85_write_value(struct i2c_client *client, u8 reg, int value)
 {
-	int res ;
-
-	switch( reg ) {
-	case LM85_REG_FAN(0) :  /* Write WORD data */
-	case LM85_REG_FAN(1) :
-	case LM85_REG_FAN(2) :
-	case LM85_REG_FAN(3) :
-	case LM85_REG_FAN_MIN(0) :
-	case LM85_REG_FAN_MIN(1) :
-	case LM85_REG_FAN_MIN(2) :
-	case LM85_REG_FAN_MIN(3) :
+	switch (reg) {
+	case LM85_REG_FAN(0):  /* Write WORD data */
+	case LM85_REG_FAN(1):
+	case LM85_REG_FAN(2):
+	case LM85_REG_FAN(3):
+	case LM85_REG_FAN_MIN(0):
+	case LM85_REG_FAN_MIN(1):
+	case LM85_REG_FAN_MIN(2):
+	case LM85_REG_FAN_MIN(3):
 	/* NOTE: ALARM is read only, so not included here */
-		res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ;
-		res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ;
-		break ;
-	case ADT7463_REG_TMIN_CTL1 :  /* Write WORD MSB, LSB */
-		res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff);
-		res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ;
-		break ;
+		i2c_smbus_write_byte_data(client, reg, value & 0xff);
+		i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+		break;
 	default:	/* Write BYTE data */
-		res = i2c_smbus_write_byte_data(client, reg, value);
-		break ;
+		i2c_smbus_write_byte_data(client, reg, value);
+		break;
 	}
-
-	return res ;
-}
-
-static void lm85_init_client(struct i2c_client *client)
-{
-	int value;
-	struct lm85_data *data = i2c_get_clientdata(client);
-
-	dev_dbg(&client->dev, "Initializing device\n");
-
-	/* Warn if part was not "READY" */
-	value = lm85_read_value(client, LM85_REG_CONFIG);
-	dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value);
-	if( value & 0x02 ) {
-		dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n",
-			    i2c_adapter_id(client->adapter), client->addr );
-	};
-	if( ! (value & 0x04) ) {
-		dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
-			    i2c_adapter_id(client->adapter), client->addr );
-	};
-	if( value & 0x10
-	    && ( data->type == adm1027
-		|| data->type == adt7463 ) ) {
-		dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set.  "
-			"Please report this to the lm85 maintainer.\n",
-			    i2c_adapter_id(client->adapter), client->addr );
-	};
-
-	/* WE INTENTIONALLY make no changes to the limits,
-	 *   offsets, pwms, fans and zones.  If they were
-	 *   configured, we don't want to mess with them.
-	 *   If they weren't, the default is 100% PWM, no
-	 *   control and will suffice until 'sensors -s'
-	 *   can be run by the user.
-	 */
-
-	/* Start monitoring */
-	value = lm85_read_value(client, LM85_REG_CONFIG);
-	/* Try to clear LOCK, Set START, save everything else */
-	value = (value & ~ 0x02) | 0x01 ;
-	dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value);
-	lm85_write_value(client, LM85_REG_CONFIG, value);
 }
 
 static struct lm85_data *lm85_update_device(struct device *dev)
@@ -1427,28 +1355,30 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 
 	mutex_lock(&data->update_lock);
 
-	if ( !data->valid ||
-	     time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
+	if (!data->valid ||
+	     time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) {
 		/* Things that change quickly */
 		dev_dbg(&client->dev, "Reading sensor values\n");
-		
+
 		/* Have to read extended bits first to "freeze" the
 		 * more significant bits that are read later.
 		 * There are 2 additional resolution bits per channel and we
 		 * have room for 4, so we shift them to the left.
 		 */
-		if ( (data->type == adm1027) || (data->type == adt7463) ) {
+		if (data->type == adm1027 || data->type == adt7463) {
 			int ext1 = lm85_read_value(client,
 						   ADM1027_REG_EXTEND_ADC1);
 			int ext2 =  lm85_read_value(client,
 						    ADM1027_REG_EXTEND_ADC2);
 			int val = (ext1 << 8) + ext2;
 
-			for(i = 0; i <= 4; i++)
-				data->in_ext[i] = ((val>>(i * 2))&0x03) << 2;
+			for (i = 0; i <= 4; i++)
+				data->in_ext[i] =
+					((val >> (i * 2)) & 0x03) << 2;
 
-			for(i = 0; i <= 2; i++)
-				data->temp_ext[i] = (val>>((i + 4) * 2))&0x0c;
+			for (i = 0; i <= 2; i++)
+				data->temp_ext[i] =
+					(val >> ((i + 4) * 2)) & 0x0c;
 		}
 
 		data->vid = lm85_read_value(client, LM85_REG_VID);
@@ -1456,6 +1386,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 		for (i = 0; i <= 3; ++i) {
 			data->in[i] =
 			    lm85_read_value(client, LM85_REG_IN(i));
+			data->fan[i] =
+			    lm85_read_value(client, LM85_REG_FAN(i));
 		}
 
 		if (!(data->type == adt7463 && (data->vid & 0x80))) {
@@ -1463,38 +1395,25 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 				      LM85_REG_IN(4));
 		}
 
-		for (i = 0; i <= 3; ++i) {
-			data->fan[i] =
-			    lm85_read_value(client, LM85_REG_FAN(i));
-		}
-
 		for (i = 0; i <= 2; ++i) {
 			data->temp[i] =
 			    lm85_read_value(client, LM85_REG_TEMP(i));
-		}
-
-		for (i = 0; i <= 2; ++i) {
 			data->pwm[i] =
 			    lm85_read_value(client, LM85_REG_PWM(i));
 		}
 
 		data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
 
-		if ( data->type == adt7463 ) {
-			if( data->therm_total < ULONG_MAX - 256 ) {
-			    data->therm_total +=
-				lm85_read_value(client, ADT7463_REG_THERM );
-			}
-		} else if ( data->type == emc6d100 ) {
+		if (data->type == emc6d100) {
 			/* Three more voltage sensors */
 			for (i = 5; i <= 7; ++i) {
-				data->in[i] =
-					lm85_read_value(client, EMC6D100_REG_IN(i));
+				data->in[i] = lm85_read_value(client,
+							EMC6D100_REG_IN(i));
 			}
 			/* More alarm bits */
-			data->alarms |=
-				lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
-		} else if (data->type == emc6d102 ) {
+			data->alarms |= lm85_read_value(client,
+						EMC6D100_REG_ALARM3) << 16;
+		} else if (data->type == emc6d102) {
 			/* Have to read LSB bits after the MSB ones because
 			   the reading of the MSB bits has frozen the
 			   LSBs (backward from the ADM1027).
@@ -1509,20 +1428,20 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 						   EMC6D102_REG_EXTEND_ADC4);
 			data->in_ext[0] = ext3 & 0x0f;
 			data->in_ext[1] = ext4 & 0x0f;
-			data->in_ext[2] = (ext4 >> 4) & 0x0f;
-			data->in_ext[3] = (ext3 >> 4) & 0x0f;
-			data->in_ext[4] = (ext2 >> 4) & 0x0f;
+			data->in_ext[2] = ext4 >> 4;
+			data->in_ext[3] = ext3 >> 4;
+			data->in_ext[4] = ext2 >> 4;
 
 			data->temp_ext[0] = ext1 & 0x0f;
 			data->temp_ext[1] = ext2 & 0x0f;
-			data->temp_ext[2] = (ext1 >> 4) & 0x0f;
+			data->temp_ext[2] = ext1 >> 4;
 		}
 
-		data->last_reading = jiffies ;
-	};  /* last_reading */
+		data->last_reading = jiffies;
+	}  /* last_reading */
 
-	if ( !data->valid ||
-	     time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) {
+	if (!data->valid ||
+	     time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) {
 		/* Things that don't change often */
 		dev_dbg(&client->dev, "Reading config values\n");
 
@@ -1531,6 +1450,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			    lm85_read_value(client, LM85_REG_IN_MIN(i));
 			data->in_max[i] =
 			    lm85_read_value(client, LM85_REG_IN_MAX(i));
+			data->fan_min[i] =
+			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
 		}
 
 		if (!(data->type == adt7463 && (data->vid & 0x80))) {
@@ -1540,34 +1461,28 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 					  LM85_REG_IN_MAX(4));
 		}
 
-		if ( data->type == emc6d100 ) {
+		if (data->type == emc6d100) {
 			for (i = 5; i <= 7; ++i) {
-				data->in_min[i] =
-					lm85_read_value(client, EMC6D100_REG_IN_MIN(i));
-				data->in_max[i] =
-					lm85_read_value(client, EMC6D100_REG_IN_MAX(i));
+				data->in_min[i] = lm85_read_value(client,
+						EMC6D100_REG_IN_MIN(i));
+				data->in_max[i] = lm85_read_value(client,
+						EMC6D100_REG_IN_MAX(i));
 			}
 		}
 
-		for (i = 0; i <= 3; ++i) {
-			data->fan_min[i] =
-			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
-		}
-
 		for (i = 0; i <= 2; ++i) {
+			int val;
+
 			data->temp_min[i] =
 			    lm85_read_value(client, LM85_REG_TEMP_MIN(i));
 			data->temp_max[i] =
 			    lm85_read_value(client, LM85_REG_TEMP_MAX(i));
-		}
 
-		for (i = 0; i <= 2; ++i) {
-			int val ;
 			data->autofan[i].config =
 			    lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
 			val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
-			data->autofan[i].freq = val & 0x07 ;
-			data->zone[i].range = (val >> 4) & 0x0f ;
+			data->autofan[i].freq = val & 0x07;
+			data->zone[i].range = val >> 4;
 			data->autofan[i].min_pwm =
 			    lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
 			data->zone[i].limit =
@@ -1577,50 +1492,19 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 		}
 
 		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
-		data->smooth[0] = i & 0x0f ;
-		data->syncpwm3 = i & 0x10 ;  /* Save PWM3 config */
-		data->autofan[0].min_off = (i & 0x20) != 0 ;
-		data->autofan[1].min_off = (i & 0x40) != 0 ;
-		data->autofan[2].min_off = (i & 0x80) != 0 ;
-		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2);
-		data->smooth[1] = (i>>4) & 0x0f ;
-		data->smooth[2] = i & 0x0f ;
+		data->autofan[0].min_off = (i & 0x20) != 0;
+		data->autofan[1].min_off = (i & 0x40) != 0;
+		data->autofan[2].min_off = (i & 0x80) != 0;
 
 		i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
-		data->zone[0].hyst = (i>>4) & 0x0f ;
-		data->zone[1].hyst = i & 0x0f ;
+		data->zone[0].hyst = i >> 4;
+		data->zone[1].hyst = i & 0x0f;
 
 		i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
-		data->zone[2].hyst = (i>>4) & 0x0f ;
-
-		if ( (data->type == lm85b) || (data->type == lm85c) ) {
-			data->tach_mode = lm85_read_value(client,
-				LM85_REG_TACH_MODE );
-			data->spinup_ctl = lm85_read_value(client,
-				LM85_REG_SPINUP_CTL );
-		} else if ( (data->type == adt7463) || (data->type == adm1027) ) {
-			if ( data->type == adt7463 ) {
-				for (i = 0; i <= 2; ++i) {
-				    data->oppoint[i] = lm85_read_value(client,
-					ADT7463_REG_OPPOINT(i) );
-				}
-				data->tmin_ctl = lm85_read_value(client,
-					ADT7463_REG_TMIN_CTL1 );
-				data->therm_limit = lm85_read_value(client,
-					ADT7463_REG_THERM_LIMIT );
-			}
-			for (i = 0; i <= 2; ++i) {
-			    data->temp_offset[i] = lm85_read_value(client,
-				ADM1027_REG_TEMP_OFFSET(i) );
-			}
-			data->tach_mode = lm85_read_value(client,
-				ADM1027_REG_CONFIG3 );
-			data->fan_ppr = lm85_read_value(client,
-				ADM1027_REG_FAN_PPR );
-		}
-	
+		data->zone[2].hyst = i >> 4;
+
 		data->last_config = jiffies;
-	};  /* last_config */
+	}  /* last_config */
 
 	data->valid = 1;
 
@@ -1635,17 +1519,15 @@ static int __init sm_lm85_init(void)
 	return i2c_add_driver(&lm85_driver);
 }
 
-static void  __exit sm_lm85_exit(void)
+static void __exit sm_lm85_exit(void)
 {
 	i2c_del_driver(&lm85_driver);
 }
 
-/* Thanks to Richard Barrington for adding the LM85 to sensors-detect.
- * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with
- *     post 2.7.0 CVS changes.
- */
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, "
+	"Margit Schubert-While <margitsw@t-online.de>, "
+	"Justin Thiessen <jthiessen@penguincomputing.com>");
 MODULE_DESCRIPTION("LM85-B, LM85-C driver");
 
 module_init(sm_lm85_init);
diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index 3b01001108c..7d97431e132 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -55,8 +55,11 @@ I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs "
 static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
 static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
 static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
+static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 };
+static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 };
 
 #define THMC50_REG_CONF_nFANOFF			0x20
+#define THMC50_REG_CONF_PROGRAMMED		0x08
 
 /* Each client has this additional data */
 struct thmc50_data {
@@ -72,6 +75,7 @@ struct thmc50_data {
 	s8 temp_input[3];
 	s8 temp_max[3];
 	s8 temp_min[3];
+	s8 temp_critical[3];
 	u8 analog_out;
 	u8 alarms;
 };
@@ -199,6 +203,15 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+static ssize_t show_temp_critical(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct thmc50_data *data = thmc50_update_device(dev);
+	return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000);
+}
+
 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
@@ -214,7 +227,9 @@ static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp,	\
 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,	\
 			show_temp_min, set_temp_min, offset - 1);	\
 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,	\
-			show_temp_max, set_temp_max, offset - 1);
+			show_temp_max, set_temp_max, offset - 1);	\
+static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO,			\
+			show_temp_critical, NULL, offset - 1);
 
 temp_reg(1);
 temp_reg(2);
@@ -234,10 +249,12 @@ static struct attribute *thmc50_attributes[] = {
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
 	&sensor_dev_attr_temp1_min.dev_attr.attr,
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
 	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp2_max.dev_attr.attr,
 	&sensor_dev_attr_temp2_min.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit.dev_attr.attr,
 	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
 	&sensor_dev_attr_pwm1.dev_attr.attr,
@@ -254,6 +271,7 @@ static struct attribute *temp3_attributes[] = {
 	&sensor_dev_attr_temp3_max.dev_attr.attr,
 	&sensor_dev_attr_temp3_min.dev_attr.attr,
 	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit.dev_attr.attr,
 	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
 	NULL
@@ -429,6 +447,10 @@ static struct thmc50_data *thmc50_update_device(struct device *dev)
 
 		int temps = data->has_temp3 ? 3 : 2;
 		int i;
+		int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
+
+		prog &= THMC50_REG_CONF_PROGRAMMED;
+
 		for (i = 0; i < temps; i++) {
 			data->temp_input[i] = i2c_smbus_read_byte_data(client,
 						THMC50_REG_TEMP[i]);
@@ -436,6 +458,10 @@ static struct thmc50_data *thmc50_update_device(struct device *dev)
 						THMC50_REG_TEMP_MAX[i]);
 			data->temp_min[i] = i2c_smbus_read_byte_data(client,
 						THMC50_REG_TEMP_MIN[i]);
+			data->temp_critical[i] =
+				i2c_smbus_read_byte_data(client,
+					prog ? THMC50_REG_TEMP_CRITICAL[i]
+					     : THMC50_REG_TEMP_DEFAULT[i]);
 		}
 		data->analog_out =
 		    i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 9564fb06995..b30e5796cb2 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -67,10 +67,6 @@ module_param(force_i2c, byte, 0);
 MODULE_PARM_DESC(force_i2c,
 		 "Initialize the i2c address of the sensors");
 
-static int reset;
-module_param(reset, bool, 0);
-MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
-
 static int init = 1;
 module_param(init, bool, 0);
 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
@@ -209,6 +205,13 @@ static const u16 w83627hf_reg_temp_over[]	= { 0x39, 0x155, 0x255 };
 #define W83627HF_REG_PWM1 0x5A
 #define W83627HF_REG_PWM2 0x5B
 
+static const u8 W83627THF_REG_PWM_ENABLE[] = {
+	0x04,		/* FAN 1 mode */
+	0x04,		/* FAN 2 mode */
+	0x12,		/* FAN AUX mode */
+};
+static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 };
+
 #define W83627THF_REG_PWM1		0x01	/* 697HF/637HF/687THF too */
 #define W83627THF_REG_PWM2		0x03	/* 697HF/637HF/687THF too */
 #define W83627THF_REG_PWM3		0x11	/* 637HF/687THF too */
@@ -366,6 +369,9 @@ struct w83627hf_data {
 	u32 alarms;		/* Register encoding, combined */
 	u32 beep_mask;		/* Register encoding, combined */
 	u8 pwm[3];		/* Register value */
+	u8 pwm_enable[3];	/* 1 = manual
+				   2 = thermal cruise (also called SmartFan I)
+				   3 = fan speed cruise */
 	u8 pwm_freq[3];		/* Register value */
 	u16 sens[3];		/* 1 = pentium diode; 2 = 3904 diode;
 				   4 = thermistor */
@@ -957,6 +963,42 @@ static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1);
 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2);
 
 static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	int nr = to_sensor_dev_attr(devattr)->index;
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm_enable[nr]);
+}
+
+static ssize_t
+store_pwm_enable(struct device *dev, struct device_attribute *devattr,
+	  const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(devattr)->index;
+	struct w83627hf_data *data = dev_get_drvdata(dev);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	u8 reg;
+
+	if (!val || (val > 3))	/* modes 1, 2 and 3 are supported */
+		return -EINVAL;
+	mutex_lock(&data->update_lock);
+	data->pwm_enable[nr] = val;
+	reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]);
+	reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]);
+	reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr];
+	w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+						  store_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+						  store_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+						  store_pwm_enable, 2);
+
+static ssize_t
 show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf)
 {
 	int nr = to_sensor_dev_attr(devattr)->index;
@@ -1223,6 +1265,11 @@ static struct attribute *w83627hf_attributes_opt[] = {
 	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+
 	NULL
 };
 
@@ -1366,6 +1413,19 @@ static int __devinit w83627hf_probe(struct platform_device *pdev)
 				&sensor_dev_attr_pwm3_freq.dev_attr)))
 			goto ERROR4;
 
+	if (data->type != w83627hf)
+		if ((err = device_create_file(dev,
+				&sensor_dev_attr_pwm1_enable.dev_attr))
+		 || (err = device_create_file(dev,
+				&sensor_dev_attr_pwm2_enable.dev_attr)))
+			goto ERROR4;
+
+	if (data->type == w83627thf || data->type == w83637hf
+	 || data->type == w83687thf)
+		if ((err = device_create_file(dev,
+				&sensor_dev_attr_pwm3_enable.dev_attr)))
+			goto ERROR4;
+
 	data->hwmon_dev = hwmon_device_register(dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
@@ -1536,29 +1596,6 @@ static void __devinit w83627hf_init_device(struct platform_device *pdev)
 	enum chips type = data->type;
 	u8 tmp;
 
-	if (reset) {
-		/* Resetting the chip has been the default for a long time,
-		   but repeatedly caused problems (fans going to full
-		   speed...) so it is now optional. It might even go away if
-		   nobody reports it as being useful, as I see very little
-		   reason why this would be needed at all. */
-		dev_info(&pdev->dev, "If reset=1 solved a problem you were "
-			 "having, please report!\n");
-
-		/* save this register */
-		i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG);
-		/* Reset all except Watchdog values and last conversion values
-		   This sets fan-divs to 2, among others */
-		w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80);
-		/* Restore the register and disable power-on abnormal beep.
-		   This saves FAN 1/2/3 input/output values set by BIOS. */
-		w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
-		/* Disable master beep-enable (reset turns it on).
-		   Individual beeps should be reset to off but for some reason
-		   disabling this bit helps some people not get beeped */
-		w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0);
-	}
-
 	/* Minimize conflicts with other winbond i2c-only clients...  */
 	/* disable i2c subclients... how to disable main i2c client?? */
 	/* force i2c address to relatively uncommon address */
@@ -1655,6 +1692,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 {
 	struct w83627hf_data *data = dev_get_drvdata(dev);
 	int i, num_temps = (data->type == w83697hf) ? 2 : 3;
+	int num_pwms = (data->type == w83697hf) ? 2 : 3;
 
 	mutex_lock(&data->update_lock);
 
@@ -1707,6 +1745,15 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 					break;
 			}
 		}
+		if (data->type != w83627hf) {
+			for (i = 0; i < num_pwms; i++) {
+				u8 tmp = w83627hf_read_value(data,
+					W83627THF_REG_PWM_ENABLE[i]);
+				data->pwm_enable[i] =
+					((tmp >> W83627THF_PWM_ENABLE_SHIFT[i])
+					& 0x03) + 1;
+			}
+		}
 		for (i = 0; i < num_temps; i++) {
 			data->temp[i] = w83627hf_read_value(
 						data, w83627hf_reg_temp[i]);
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index e4e91c9d480..de21142d106 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -233,11 +233,9 @@ static u8 fan_to_reg(long rpm, int div)
 static u8 div_to_reg(int nr, long val)
 {
 	int i;
-	int max;
 
-	/* first three fan's divisor max out at 8, rest max out at 128 */
-	max = (nr < 3) ? 8 : 128;
-	val = SENSORS_LIMIT(val, 1, max) >> 1;
+	/* fan divisors max out at 128 */
+	val = SENSORS_LIMIT(val, 1, 128) >> 1;
 	for (i = 0; i < 7; i++) {
 		if (val == 0)
 			break;
@@ -530,6 +528,7 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr,
 	unsigned long min;
 	u8 tmp_fan_div;
 	u8 fan_div_reg;
+	u8 vbat_reg;
 	int indx = 0;
 	u8 keep_mask = 0;
 	u8 new_shift = 0;
@@ -581,6 +580,16 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr,
 	w83791d_write(client, W83791D_REG_FAN_DIV[indx],
 				fan_div_reg | tmp_fan_div);
 
+	/* Bit 2 of fans 0-2 is stored in the vbat register (bits 5-7) */
+	if (nr < 3) {
+		keep_mask = ~(1 << (nr + 5));
+		vbat_reg = w83791d_read(client, W83791D_REG_VBAT)
+				& keep_mask;
+		tmp_fan_div = (data->fan_div[nr] << (3 + nr)) & ~keep_mask;
+		w83791d_write(client, W83791D_REG_VBAT,
+				vbat_reg | tmp_fan_div);
+	}
+
 	/* Restore fan_min */
 	data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr]));
 	w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]);
@@ -1046,9 +1055,10 @@ static int w83791d_probe(struct i2c_client *client,
 {
 	struct w83791d_data *data;
 	struct device *dev = &client->dev;
-	int i, val1, err;
+	int i, err;
 
 #ifdef DEBUG
+	int val1;
 	val1 = w83791d_read(client, W83791D_REG_DID_VID4);
 	dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n",
 			(val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1);
@@ -1182,6 +1192,7 @@ static struct w83791d_data *w83791d_update_device(struct device *dev)
 	struct w83791d_data *data = i2c_get_clientdata(client);
 	int i, j;
 	u8 reg_array_tmp[3];
+	u8 vbat_reg;
 
 	mutex_lock(&data->update_lock);
 
@@ -1219,6 +1230,12 @@ static struct w83791d_data *w83791d_update_device(struct device *dev)
 		data->fan_div[3] = reg_array_tmp[2] & 0x07;
 		data->fan_div[4] = (reg_array_tmp[2] >> 4) & 0x07;
 
+		/* The fan divisor for fans 0-2 get bit 2 from
+		   bits 5-7 respectively of vbat register */
+		vbat_reg = w83791d_read(client, W83791D_REG_VBAT);
+		for (i = 0; i < 3; i++)
+			data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04;
+
 		/* Update the first temperature sensor */
 		for (i = 0; i < 3; i++) {
 			data->temp1[i] = w83791d_read(client,
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 96867347bcb..711ca08ab77 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -38,6 +38,20 @@ config I2C_CHARDEV
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-dev.
 
+config I2C_HELPER_AUTO
+	bool "Autoselect pertinent helper modules"
+	default y
+	help
+	  Some I2C bus drivers require so-called "I2C algorithm" modules
+	  to work. These are basically software-only abstractions of generic
+	  I2C interfaces. This option will autoselect them so that you don't
+	  have to care.
+
+	  Unselect this only if you need to enable additional helper
+	  modules, for example for use with external I2C bus drivers.
+
+	  In doubt, say Y.
+
 source drivers/i2c/algos/Kconfig
 source drivers/i2c/busses/Kconfig
 source drivers/i2c/chips/Kconfig
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 7137a17402f..b788579b822 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -2,15 +2,20 @@
 # I2C algorithm drivers configuration
 #
 
+menu "I2C Algorithms"
+	depends on !I2C_HELPER_AUTO
+
 config I2C_ALGOBIT
-	tristate
+	tristate "I2C bit-banging interfaces"
 
 config I2C_ALGOPCF
-	tristate
+	tristate "I2C PCF 8584 interfaces"
 
 config I2C_ALGOPCA
-	tristate
+	tristate "I2C PCA 9564 interfaces"
 
 config I2C_ALGO_SGI
 	tristate
 	depends on SGI_IP22 || SGI_IP32 || X86_VISWS
+
+endmenu
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 7c2be3558a2..75089febbc1 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -16,7 +16,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/ioc.h>
 #include <asm/system.h>
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 72872d1e63e..8ba2bcf727d 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -155,6 +155,9 @@ static int __init amd756_s4882_init(void)
 	int i, error;
 	union i2c_smbus_data ioconfig;
 
+	if (!amd756_smbus.dev.parent)
+		return -ENODEV;
+
 	/* Configure the PCA9556 multiplexer */
 	ioconfig.byte = 0x00; /* All I/O to output mode */
 	error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
@@ -168,11 +171,7 @@ static int __init amd756_s4882_init(void)
 	/* Unregister physical bus */
 	error = i2c_del_adapter(&amd756_smbus);
 	if (error) {
-		if (error == -EINVAL)
-			error = -ENODEV;
-		else
-			dev_err(&amd756_smbus.dev, "Physical bus removal "
-				"failed\n");
+		dev_err(&amd756_smbus.dev, "Physical bus removal failed\n");
 		goto ERROR0;
 	}
 
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 73d61946a53..9efb0213725 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -14,7 +14,6 @@
 */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -27,9 +26,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/at91_twi.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_twi.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #define TWI_CLOCK		100000		/* Hz. max 400 Kbits/sec */
 
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index af3846eda98..5d7789834b9 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -36,10 +36,9 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/i2c.h>
+#include <mach/i2c.h>
 
 /* ----- global defines ----------------------------------------------- */
 
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 5af9e6521e6..05d72e98135 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -33,8 +33,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <asm/hardware.h>	/* Pick up IXP2000-specific bits */
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>	/* Pick up IXP2000-specific bits */
+#include <mach/gpio.h>
 
 static inline int ixp2000_scl_pin(void *data)
 {
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
index d1a4cbcf2aa..29015eb9ca4 100644
--- a/drivers/i2c/busses/i2c-nforce2-s4985.c
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -150,6 +150,9 @@ static int __init nforce2_s4985_init(void)
 	int i, error;
 	union i2c_smbus_data ioconfig;
 
+	if (!nforce2_smbus)
+		return -ENODEV;
+
 	/* Configure the PCA9556 multiplexer */
 	ioconfig.byte = 0x00; /* All I/O to output mode */
 	error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
@@ -161,8 +164,6 @@ static int __init nforce2_s4985_init(void)
 	}
 
 	/* Unregister physical bus */
-	if (!nforce2_smbus)
-		return -ENODEV;
 	error = i2c_del_adapter(nforce2_smbus);
 	if (error) {
 		dev_err(&nforce2_smbus->dev, "Physical bus removal failed\n");
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 1ca21084ffc..ec15cff556b 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -19,7 +19,7 @@
 #include <linux/completion.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-pnx.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index af9e6034d7f..44d838410f1 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,11 +34,11 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/i2c.h>
+#include <mach/pxa-regs.h>
 
 struct pxa_i2c {
 	spinlock_t		lock;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 4864723c742..c772e02c280 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -35,11 +35,11 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-iic.h>
 #include <asm/plat-s3c/iic.h>
 
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 840e634fa31..640cbb23732 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -31,13 +31,84 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
+/* Transmit operation:                                                      */
+/*                                                                          */
+/* 0 byte transmit                                                          */
+/* BUS:     S     A8     ACK   P                                            */
+/* IRQ:       DTE   WAIT                                                    */
+/* ICIC:                                                                    */
+/* ICCR: 0x94 0x90                                                          */
+/* ICDR:      A8                                                            */
+/*                                                                          */
+/* 1 byte transmit                                                          */
+/* BUS:     S     A8     ACK   D8(1)   ACK   P                              */
+/* IRQ:       DTE   WAIT         WAIT                                       */
+/* ICIC:      -DTE                                                          */
+/* ICCR: 0x94       0x90                                                    */
+/* ICDR:      A8    D8(1)                                                   */
+/*                                                                          */
+/* 2 byte transmit                                                          */
+/* BUS:     S     A8     ACK   D8(1)   ACK   D8(2)   ACK   P                */
+/* IRQ:       DTE   WAIT         WAIT          WAIT                         */
+/* ICIC:      -DTE                                                          */
+/* ICCR: 0x94                    0x90                                       */
+/* ICDR:      A8    D8(1)        D8(2)                                      */
+/*                                                                          */
+/* 3 bytes or more, +---------+ gets repeated                               */
+/*                                                                          */
+/*                                                                          */
+/* Receive operation:                                                       */
+/*                                                                          */
+/* 0 byte receive - not supported since slave may hold SDA low              */
+/*                                                                          */
+/* 1 byte receive       [TX] | [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   P                              */
+/* IRQ:       DTE   WAIT     |   WAIT     DTE                               */
+/* ICIC:      -DTE           |   +DTE                                       */
+/* ICCR: 0x94       0x81     |   0xc0                                       */
+/* ICDR:      A8             |            D8(1)                             */
+/*                                                                          */
+/* 2 byte receive        [TX]| [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   D8(2)   ACK   P                */
+/* IRQ:       DTE   WAIT     |   WAIT          WAIT     DTE                 */
+/* ICIC:      -DTE           |                 +DTE                         */
+/* ICCR: 0x94       0x81     |                 0xc0                         */
+/* ICDR:      A8             |                 D8(1)    D8(2)               */
+/*                                                                          */
+/* 3 byte receive       [TX] | [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   D8(2)   ACK   D8(3)   ACK    P */
+/* IRQ:       DTE   WAIT     |   WAIT          WAIT         WAIT      DTE   */
+/* ICIC:      -DTE           |                              +DTE            */
+/* ICCR: 0x94       0x81     |                              0xc0            */
+/* ICDR:      A8             |                 D8(1)        D8(2)     D8(3) */
+/*                                                                          */
+/* 4 bytes or more, this part is repeated    +---------+                    */
+/*                                                                          */
+/*                                                                          */
+/* Interrupt order and BUSY flag                                            */
+/*     ___                                                 _                */
+/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/                 */
+/* SCL      \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/                   */
+/*                                                                          */
+/*        S   D7  D6  D5  D4  D3  D2  D1  D0              P                 */
+/*                                           ___                            */
+/* WAIT IRQ ________________________________/   \___________                */
+/* TACK IRQ ____________________________________/   \_______                */
+/* DTE  IRQ __________________________________________/   \_                */
+/* AL   IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX                */
+/*         _______________________________________________                  */
+/* BUSY __/                                               \_                */
+/*                                                                          */
+
 enum sh_mobile_i2c_op {
 	OP_START = 0,
-	OP_TX_ONLY,
+	OP_TX_FIRST,
+	OP_TX,
 	OP_TX_STOP,
 	OP_TX_TO_RX,
-	OP_RX_ONLY,
+	OP_RX,
 	OP_RX_STOP,
+	OP_RX_STOP_DATA,
 };
 
 struct sh_mobile_i2c_data {
@@ -127,25 +198,34 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 	spin_lock_irqsave(&pd->lock, flags);
 
 	switch (op) {
-	case OP_START:
+	case OP_START: /* issue start and trigger DTE interrupt */
 		iowrite8(0x94, ICCR(pd));
 		break;
-	case OP_TX_ONLY:
+	case OP_TX_FIRST: /* disable DTE interrupt and write data */
+		iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
 		iowrite8(data, ICDR(pd));
 		break;
-	case OP_TX_STOP:
+	case OP_TX: /* write data */
 		iowrite8(data, ICDR(pd));
-		iowrite8(0x90, ICCR(pd));
-		iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd));
 		break;
-	case OP_TX_TO_RX:
+	case OP_TX_STOP: /* write data and issue a stop afterwards */
 		iowrite8(data, ICDR(pd));
+		iowrite8(0x90, ICCR(pd));
+		break;
+	case OP_TX_TO_RX: /* select read mode */
 		iowrite8(0x81, ICCR(pd));
 		break;
-	case OP_RX_ONLY:
+	case OP_RX: /* just read data */
 		ret = ioread8(ICDR(pd));
 		break;
-	case OP_RX_STOP:
+	case OP_RX_STOP: /* enable DTE interrupt, issue stop */
+		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+			 ICIC(pd));
+		iowrite8(0xc0, ICCR(pd));
+		break;
+	case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
+		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+			 ICIC(pd));
 		ret = ioread8(ICDR(pd));
 		iowrite8(0xc0, ICCR(pd));
 		break;
@@ -157,58 +237,120 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 	return ret;
 }
 
+static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
+{
+	if (pd->pos == -1)
+		return 1;
+
+	return 0;
+}
+
+static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
+{
+	if (pd->pos == (pd->msg->len - 1))
+		return 1;
+
+	return 0;
+}
+
+static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
+				   unsigned char *buf)
+{
+	switch (pd->pos) {
+	case -1:
+		*buf = (pd->msg->addr & 0x7f) << 1;
+		*buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
+		break;
+	default:
+		*buf = pd->msg->buf[pd->pos];
+	}
+}
+
+static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
+{
+	unsigned char data;
+
+	if (pd->pos == pd->msg->len)
+		return 1;
+
+	sh_mobile_i2c_get_data(pd, &data);
+
+	if (sh_mobile_i2c_is_last_byte(pd))
+		i2c_op(pd, OP_TX_STOP, data);
+	else if (sh_mobile_i2c_is_first_byte(pd))
+		i2c_op(pd, OP_TX_FIRST, data);
+	else
+		i2c_op(pd, OP_TX, data);
+
+	pd->pos++;
+	return 0;
+}
+
+static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
+{
+	unsigned char data;
+	int real_pos;
+
+	do {
+		if (pd->pos <= -1) {
+			sh_mobile_i2c_get_data(pd, &data);
+
+			if (sh_mobile_i2c_is_first_byte(pd))
+				i2c_op(pd, OP_TX_FIRST, data);
+			else
+				i2c_op(pd, OP_TX, data);
+			break;
+		}
+
+		if (pd->pos == 0) {
+			i2c_op(pd, OP_TX_TO_RX, 0);
+			break;
+		}
+
+		real_pos = pd->pos - 2;
+
+		if (pd->pos == pd->msg->len) {
+			if (real_pos < 0) {
+				i2c_op(pd, OP_RX_STOP, 0);
+				break;
+			}
+			data = i2c_op(pd, OP_RX_STOP_DATA, 0);
+		} else
+			data = i2c_op(pd, OP_RX, 0);
+
+		pd->msg->buf[real_pos] = data;
+	} while (0);
+
+	pd->pos++;
+	return pd->pos == (pd->msg->len + 2);
+}
+
 static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 {
 	struct platform_device *dev = dev_id;
 	struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
-	struct i2c_msg *msg = pd->msg;
-	unsigned char data, sr;
-	int wakeup = 0;
+	unsigned char sr;
+	int wakeup;
 
 	sr = ioread8(ICSR(pd));
-	pd->sr |= sr;
+	pd->sr |= sr; /* remember state */
 
 	dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
-	       (msg->flags & I2C_M_RD) ? "read" : "write",
-	       pd->pos, msg->len);
+	       (pd->msg->flags & I2C_M_RD) ? "read" : "write",
+	       pd->pos, pd->msg->len);
 
 	if (sr & (ICSR_AL | ICSR_TACK)) {
-		iowrite8(0, ICIC(pd)); /* disable interrupts */
-		wakeup = 1;
-		goto do_wakeup;
-	}
+		/* don't interrupt transaction - continue to issue stop */
+		iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+		wakeup = 0;
+	} else if (pd->msg->flags & I2C_M_RD)
+		wakeup = sh_mobile_i2c_isr_rx(pd);
+	else
+		wakeup = sh_mobile_i2c_isr_tx(pd);
 
-	if (pd->pos == msg->len) {
-		i2c_op(pd, OP_RX_ONLY, 0);
-		wakeup = 1;
-		goto do_wakeup;
-	}
+	if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
+		iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
 
-	if (pd->pos == -1) {
-		data = (msg->addr & 0x7f) << 1;
-		data |= (msg->flags & I2C_M_RD) ? 1 : 0;
-	} else
-		data = msg->buf[pd->pos];
-
-	if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) {
-		if (msg->flags & I2C_M_RD)
-			i2c_op(pd, OP_TX_TO_RX, data);
-		else if (pd->pos == (msg->len - 1)) {
-			i2c_op(pd, OP_TX_STOP, data);
-			wakeup = 1;
-		} else
-			i2c_op(pd, OP_TX_ONLY, data);
-	} else {
-		if (pd->pos == (msg->len - 1))
-			data = i2c_op(pd, OP_RX_STOP, 0);
-		else
-			data = i2c_op(pd, OP_RX_ONLY, 0);
-
-		msg->buf[pd->pos] = data;
-	}
-	pd->pos++;
-
- do_wakeup:
 	if (wakeup) {
 		pd->sr |= SW_DONE;
 		wake_up(&pd->wait);
@@ -219,6 +361,11 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 
 static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
 {
+	if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
+		dev_err(pd->dev, "Unsupported zero length i2c read\n");
+		return -EIO;
+	}
+
 	/* Initialize channel registers */
 	iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
 
@@ -233,9 +380,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
 	pd->pos = -1;
 	pd->sr = 0;
 
-	/* Enable all interrupts except wait */
-	iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE,
-		 ICIC(pd));
+	/* Enable all interrupts to begin with */
+	iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
 	return 0;
 }
 
@@ -268,25 +414,18 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
 		if (!k)
 			dev_err(pd->dev, "Transfer request timed out\n");
 
-		retry_count = 10;
+		retry_count = 1000;
 again:
 		val = ioread8(ICSR(pd));
 
 		dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
 
-		if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
-			err = -EIO;
-			break;
-		}
-
 		/* the interrupt handler may wake us up before the
 		 * transfer is finished, so poll the hardware
 		 * until we're done.
 		 */
-
-		if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) &&
-		      (val & ICSR_SDAM))) {
-			msleep(1);
+		if (val & ICSR_BUSY) {
+			udelay(10);
 			if (retry_count--)
 				goto again;
 
@@ -294,6 +433,12 @@ again:
 			dev_err(pd->dev, "Polling timed out\n");
 			break;
 		}
+
+		/* handle missing acknowledge and arbitration lost */
+		if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
+			err = -EIO;
+			break;
+		}
 	}
 
 	deactivate_ch(pd);
diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c
index e764c94f3e3..2a4acb26956 100644
--- a/drivers/i2c/chips/at24.c
+++ b/drivers/i2c/chips/at24.c
@@ -188,7 +188,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 			count = I2C_SMBUS_BLOCK_MAX;
 		status = i2c_smbus_read_i2c_block_data(client, offset,
 				count, buf);
-		dev_dbg(&client->dev, "smbus read %zd@%d --> %d\n",
+		dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
 				count, offset, status);
 		return (status < 0) ? -EIO : status;
 	}
@@ -214,7 +214,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 	msg[1].len = count;
 
 	status = i2c_transfer(client->adapter, msg, 2);
-	dev_dbg(&client->dev, "i2c read %zd@%d --> %d\n",
+	dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
 			count, offset, status);
 
 	if (status == 2)
@@ -334,7 +334,7 @@ static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
 			if (status == 1)
 				status = count;
 		}
-		dev_dbg(&client->dev, "write %zd@%d --> %zd (%ld)\n",
+		dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
 				count, offset, status, jiffies);
 
 		if (status == count)
@@ -512,7 +512,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	i2c_set_clientdata(client, at24);
 
-	dev_info(&client->dev, "%Zd byte %s EEPROM %s\n",
+	dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
 		at24->bin.size, client->name,
 		writable ? "(writable)" : "(read-only)");
 	dev_dbg(&client->dev,
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 03a33f1b9cd..4655b794ebe 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -33,7 +33,7 @@
 #include <linux/workqueue.h>
 
 #include <asm/irq.h>
-#include <asm/arch/usb.h>
+#include <mach/usb.h>
 
 
 #ifndef	DEBUG
@@ -94,7 +94,7 @@ struct isp1301 {
 /* board-specific PM hooks */
 
 #include <asm/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 #include <asm/mach-types.h>
 
 
@@ -1593,7 +1593,7 @@ fail1:
 	if (machine_is_omap_h2()) {
 		/* full speed signaling by default */
 		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
-			MC1_SPEED_REG);
+			MC1_SPEED);
 		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2,
 			MC2_SPD_SUSP_CTRL);
 
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index b36db1797c1..176126d3a01 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -41,11 +41,10 @@
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 
-#include <asm/mach-types.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
 
 #define DRIVER_NAME			"menelaus"
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 7bf38c41808..b346a687ab5 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -108,6 +108,9 @@ static int i2c_device_probe(struct device *dev)
 	if (!driver->probe || !driver->id_table)
 		return -ENODEV;
 	client->driver = driver;
+	if (!device_can_wakeup(&client->dev))
+		device_init_wakeup(&client->dev,
+					client->flags & I2C_CLIENT_WAKE);
 	dev_dbg(dev, "probe\n");
 
 	status = driver->probe(client, i2c_match_id(driver->id_table, client));
@@ -262,9 +265,8 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	client->adapter = adap;
 
 	client->dev.platform_data = info->platform_data;
-	device_init_wakeup(&client->dev, info->flags & I2C_CLIENT_WAKE);
 
-	client->flags = info->flags & ~I2C_CLIENT_WAKE;
+	client->flags = info->flags;
 	client->addr = info->addr;
 	client->irq = info->irq;
 
@@ -813,7 +815,12 @@ static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
 int i2c_attach_client(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	int res = 0;
+	int res;
+
+	/* Check for address business */
+	res = i2c_check_addr(adapter, client->addr);
+	if (res)
+		return res;
 
 	client->dev.parent = &client->adapter->dev;
 	client->dev.bus = &i2c_bus_type;
@@ -1183,8 +1190,8 @@ int i2c_probe(struct i2c_adapter *adapter,
 		 && address_data->normal_i2c[0] == I2C_CLIENT_END)
 			return 0;
 
-		dev_warn(&adapter->dev, "SMBus Quick command not supported, "
-			 "can't probe for chips\n");
+		dev_dbg(&adapter->dev, "SMBus Quick command not supported, "
+			"can't probe for chips\n");
 		return -EOPNOTSUPP;
 	}
 
@@ -1345,6 +1352,10 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 		}
 	}
 
+	/* Stop here if the classes do not match */
+	if (!(adapter->class & driver->class))
+		goto exit_free;
+
 	/* Stop here if we can't use SMBUS_QUICK */
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
 		if (address_data->probe[0] == I2C_CLIENT_END
@@ -1357,10 +1368,6 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 		goto exit_free;
 	}
 
-	/* Stop here if the classes do not match */
-	if (!(adapter->class & driver->class))
-		goto exit_free;
-
 	/* Probe entries are done second, and are not affected by ignore
 	   entries either */
 	for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
@@ -1451,9 +1458,11 @@ i2c_new_probed_device(struct i2c_adapter *adap,
 		if ((addr_list[i] & ~0x07) == 0x30
 		 || (addr_list[i] & ~0x0f) == 0x50
 		 || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) {
+			union i2c_smbus_data data;
+
 			if (i2c_smbus_xfer(adap, addr_list[i], 0,
 					   I2C_SMBUS_READ, 0,
-					   I2C_SMBUS_BYTE, NULL) >= 0)
+					   I2C_SMBUS_BYTE, &data) >= 0)
 				break;
 		} else {
 			if (i2c_smbus_xfer(adap, addr_list[i], 0,
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 9d55c6383b2..af4491fa7e3 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -147,7 +147,7 @@ static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count,
 	if (tmp==NULL)
 		return -ENOMEM;
 
-	pr_debug("i2c-dev: i2c-%d reading %zd bytes.\n",
+	pr_debug("i2c-dev: i2c-%d reading %zu bytes.\n",
 		iminor(file->f_path.dentry->d_inode), count);
 
 	ret = i2c_master_recv(client,tmp,count);
@@ -175,7 +175,7 @@ static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t c
 		return -EFAULT;
 	}
 
-	pr_debug("i2c-dev: i2c-%d writing %zd bytes.\n",
+	pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n",
 		iminor(file->f_path.dentry->d_inode), count);
 
 	ret = i2c_master_send(client,tmp,count);
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 130ef64b44f..fc735ab08ff 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -54,16 +54,6 @@ menuconfig IDE
 
 if IDE
 
-config IDE_MAX_HWIFS
-	int "Max IDE interfaces"
-	depends on ALPHA || SUPERH || IA64 || EMBEDDED
-	range 1 10
-	default 4
-	help
-	  This is the maximum number of IDE hardware interfaces that will
-	  be supported by the driver. Make sure it is at least as high as
-	  the number of IDE interfaces in your system.
-
 config BLK_DEV_IDE
 	tristate "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support"
 	---help---
@@ -252,7 +242,7 @@ config BLK_DEV_IDEFLOPPY
 	  module will be called ide-floppy.
 
 config BLK_DEV_IDESCSI
-	tristate "SCSI emulation support"
+	tristate "SCSI emulation support (DEPRECATED)"
 	depends on SCSI
 	select IDE_ATAPI
 	---help---
@@ -265,20 +255,6 @@ config BLK_DEV_IDESCSI
 	  and will allow you to use a SCSI device driver instead of a native
 	  ATAPI driver.
 
-	  This is useful if you have an ATAPI device for which no native
-	  driver has been written (for example, an ATAPI PD-CD drive);
-	  you can then use this emulation together with an appropriate SCSI
-	  device driver. In order to do this, say Y here and to "SCSI support"
-	  and "SCSI generic support", below. You must then provide the kernel
-	  command line "hdx=ide-scsi" (try "man bootparam" or see the
-	  documentation of your boot loader (lilo or loadlin) about how to
-	  pass options to the kernel at boot time) for devices if you want the
-	  native EIDE sub-drivers to skip over the native support, so that
-	  this SCSI emulation can be used instead.
-
-	  Note that this option does NOT allow you to attach SCSI devices to a
-	  box that doesn't have a SCSI host adapter installed.
-
 	  If both this SCSI emulation and native ATAPI support are compiled
 	  into the kernel, the native support will be used.
 
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 176532ffae0..f728f2927b5 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -11,13 +11,12 @@
 #include <linux/init.h>
 #include <linux/ide.h>
 
-#include <asm/mach-types.h>
 #include <asm/irq.h>
 
 #define DRV_NAME "ide_arm"
 
 #ifdef CONFIG_ARCH_CLPS7500
-# include <asm/arch/hardware.h>
+# include <mach/hardware.h>
 #
 # define IDE_ARM_IO	(ISASLOT_IO + 0x1f0)
 # define IDE_ARM_IRQ	IRQ_ISA_14
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 3e842d60eae..4fd91dcf1dc 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -309,7 +309,7 @@ static void __devinit palm_bk3710_chipinit(void __iomem *base)
 	palm_bk3710_setpiomode(base, NULL, 1, 600, 0);
 }
 
-static u8 __devinit palm_bk3710_cable_detect(ide_hwif_t *hwif)
+static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif)
 {
 	return ATA_CBL_PATA80;
 }
@@ -343,11 +343,10 @@ static struct ide_port_info __devinitdata palm_bk3710_port_info = {
 	.mwdma_mask		= ATA_MWDMA2,
 };
 
-static int __devinit palm_bk3710_probe(struct platform_device *pdev)
+static int __init palm_bk3710_probe(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct resource *mem, *irq;
-	struct ide_host *host;
 	unsigned long base, rate;
 	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
@@ -390,6 +389,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
 	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
 	hw.irq = irq->start;
+	hw.dev = &pdev->dev;
 	hw.chipset = ide_palm3710;
 
 	palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
@@ -413,13 +413,11 @@ static struct platform_driver platform_bk_driver = {
 		.name = "palm_bk3710",
 		.owner = THIS_MODULE,
 	},
-	.probe = palm_bk3710_probe,
-	.remove = NULL,
 };
 
 static int __init palm_bk3710_init(void)
 {
-	return platform_driver_register(&platform_bk_driver);
+	return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
 }
 
 module_init(palm_bk3710_init);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index e617cf08aef..49a8c589e34 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -66,11 +66,11 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk)
 	mutex_lock(&idecd_ref_mutex);
 	cd = ide_cd_g(disk);
 	if (cd) {
-		kref_get(&cd->kref);
-		if (ide_device_get(cd->drive)) {
-			kref_put(&cd->kref, ide_cd_release);
+		if (ide_device_get(cd->drive))
 			cd = NULL;
-		}
+		else
+			kref_get(&cd->kref);
+
 	}
 	mutex_unlock(&idecd_ref_mutex);
 	return cd;
@@ -78,9 +78,11 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk)
 
 static void ide_cd_put(struct cdrom_info *cd)
 {
+	ide_drive_t *drive = cd->drive;
+
 	mutex_lock(&idecd_ref_mutex);
-	ide_device_put(cd->drive);
 	kref_put(&cd->kref, ide_cd_release);
+	ide_device_put(drive);
 	mutex_unlock(&idecd_ref_mutex);
 }
 
@@ -1270,9 +1272,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
  */
 static void msf_from_bcd(struct atapi_msf *msf)
 {
-	msf->minute = BCD2BIN(msf->minute);
-	msf->second = BCD2BIN(msf->second);
-	msf->frame  = BCD2BIN(msf->frame);
+	msf->minute = bcd2bin(msf->minute);
+	msf->second = bcd2bin(msf->second);
+	msf->frame  = bcd2bin(msf->frame);
 }
 
 int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
@@ -1305,6 +1307,7 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
 	int stat;
 	unsigned char cmd[BLK_MAX_CDB];
 	unsigned len = sizeof(capbuf);
+	u32 blocklen;
 
 	memset(cmd, 0, BLK_MAX_CDB);
 	cmd[0] = GPCMD_READ_CDVD_CAPACITY;
@@ -1317,23 +1320,24 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
 	/*
 	 * Sanity check the given block size
 	 */
-	switch (capbuf.blocklen) {
-	case __constant_cpu_to_be32(512):
-	case __constant_cpu_to_be32(1024):
-	case __constant_cpu_to_be32(2048):
-	case __constant_cpu_to_be32(4096):
+	blocklen = be32_to_cpu(capbuf.blocklen);
+	switch (blocklen) {
+	case 512:
+	case 1024:
+	case 2048:
+	case 4096:
 		break;
 	default:
 		printk(KERN_ERR "%s: weird block size %u\n",
-			drive->name, capbuf.blocklen);
+			drive->name, blocklen);
 		printk(KERN_ERR "%s: default to 2kb block size\n",
 			drive->name);
-		capbuf.blocklen = __constant_cpu_to_be32(2048);
+		blocklen = 2048;
 		break;
 	}
 
 	*capacity = 1 + be32_to_cpu(capbuf.lba);
-	*sectors_per_frame = be32_to_cpu(capbuf.blocklen) >> SECTOR_BITS;
+	*sectors_per_frame = blocklen >> SECTOR_BITS;
 	return 0;
 }
 
@@ -1411,8 +1415,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 		return stat;
 
 	if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-		toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
-		toc->hdr.last_track  = BCD2BIN(toc->hdr.last_track);
+		toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+		toc->hdr.last_track  = bcd2bin(toc->hdr.last_track);
 	}
 
 	ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
@@ -1452,8 +1456,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 			return stat;
 
 		if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-			toc->hdr.first_track = (u8)BIN2BCD(CDROM_LEADOUT);
-			toc->hdr.last_track = (u8)BIN2BCD(CDROM_LEADOUT);
+			toc->hdr.first_track = (u8)bin2bcd(CDROM_LEADOUT);
+			toc->hdr.last_track = (u8)bin2bcd(CDROM_LEADOUT);
 		} else {
 			toc->hdr.first_track = CDROM_LEADOUT;
 			toc->hdr.last_track = CDROM_LEADOUT;
@@ -1466,14 +1470,14 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 	toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
 
 	if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-		toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
-		toc->hdr.last_track  = BCD2BIN(toc->hdr.last_track);
+		toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+		toc->hdr.last_track  = bcd2bin(toc->hdr.last_track);
 	}
 
 	for (i = 0; i <= ntracks; i++) {
 		if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
 			if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
-				toc->ent[i].track = BCD2BIN(toc->ent[i].track);
+				toc->ent[i].track = bcd2bin(toc->ent[i].track);
 			msf_from_bcd(&toc->ent[i].addr.msf);
 		}
 		toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 28d85b410f7..07ef88bd109 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -65,11 +65,10 @@ static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
 	mutex_lock(&idedisk_ref_mutex);
 	idkp = ide_disk_g(disk);
 	if (idkp) {
-		kref_get(&idkp->kref);
-		if (ide_device_get(idkp->drive)) {
-			kref_put(&idkp->kref, ide_disk_release);
+		if (ide_device_get(idkp->drive))
 			idkp = NULL;
-		}
+		else
+			kref_get(&idkp->kref);
 	}
 	mutex_unlock(&idedisk_ref_mutex);
 	return idkp;
@@ -77,9 +76,11 @@ static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
 
 static void ide_disk_put(struct ide_disk_obj *idkp)
 {
+	ide_drive_t *drive = idkp->drive;
+
 	mutex_lock(&idedisk_ref_mutex);
-	ide_device_put(idkp->drive);
 	kref_put(&idkp->kref, ide_disk_release);
+	ide_device_put(drive);
 	mutex_unlock(&idedisk_ref_mutex);
 }
 
@@ -444,20 +445,6 @@ static void idedisk_check_hpa(ide_drive_t *drive)
 	}
 }
 
-/*
- * Compute drive->capacity, the full capacity of the drive
- * Called with drive->id != NULL.
- *
- * To compute capacity, this uses either of
- *
- *    1. CHS value set by user       (whatever user sets will be trusted)
- *    2. LBA value from target drive (require new ATA feature)
- *    3. LBA value from system BIOS  (new one is OK, old one may break)
- *    4. CHS value from system BIOS  (traditional style)
- *
- * in above order (i.e., if value of higher priority is available,
- * reset will be ignored).
- */
 static void init_idedisk_capacity(ide_drive_t *drive)
 {
 	struct hd_driveid *id = drive->id;
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 71c377a7bcf..adc68275585 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -649,11 +649,7 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
 		if (id->field_valid & 2) {
 			mask = id->dma_1word & hwif->swdma_mask;
 		} else if (id->tDMA) {
-			/*
-			 * ide_fix_driveid() doesn't convert ->tDMA to the
-			 * CPU endianness so we need to do it here
-			 */
-			u8 mode = le16_to_cpu(id->tDMA);
+			u8 mode = id->tDMA;
 
 			/*
 			 * if the mode is valid convert it to the mask
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index ca11a26746f..e9034c0125f 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -167,11 +167,10 @@ static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
 	mutex_lock(&idefloppy_ref_mutex);
 	floppy = ide_floppy_g(disk);
 	if (floppy) {
-		kref_get(&floppy->kref);
-		if (ide_device_get(floppy->drive)) {
-			kref_put(&floppy->kref, idefloppy_cleanup_obj);
+		if (ide_device_get(floppy->drive))
 			floppy = NULL;
-		}
+		else
+			kref_get(&floppy->kref);
 	}
 	mutex_unlock(&idefloppy_ref_mutex);
 	return floppy;
@@ -179,9 +178,11 @@ static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
 
 static void ide_floppy_put(struct ide_floppy_obj *floppy)
 {
+	ide_drive_t *drive = floppy->drive;
+
 	mutex_lock(&idefloppy_ref_mutex);
-	ide_device_put(floppy->drive);
 	kref_put(&floppy->kref, idefloppy_cleanup_obj);
+	ide_device_put(drive);
 	mutex_unlock(&idefloppy_ref_mutex);
 }
 
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 8aae9176451..2cbadffe922 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -484,11 +484,11 @@ void ide_fix_driveid (struct hd_driveid *id)
 	for (i = 0; i < 3; i++)
 		id->words157_159[i] = __le16_to_cpu(id->words157_159[i]);
 	id->cfa_power      = __le16_to_cpu(id->cfa_power);
-	for (i = 0; i < 14; i++)
+	for (i = 0; i < 15; i++)
 		id->words161_175[i] = __le16_to_cpu(id->words161_175[i]);
-	for (i = 0; i < 31; i++)
+	for (i = 0; i < 30; i++)
 		id->words176_205[i] = __le16_to_cpu(id->words176_205[i]);
-	for (i = 0; i < 48; i++)
+	for (i = 0; i < 49; i++)
 		id->words206_254[i] = __le16_to_cpu(id->words206_254[i]);
 	id->integrity_word  = __le16_to_cpu(id->integrity_word);
 # else
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 82c2afe4d28..1bce84b5663 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -331,11 +331,10 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
 	mutex_lock(&idetape_ref_mutex);
 	tape = ide_tape_g(disk);
 	if (tape) {
-		kref_get(&tape->kref);
-		if (ide_device_get(tape->drive)) {
-			kref_put(&tape->kref, ide_tape_release);
+		if (ide_device_get(tape->drive))
 			tape = NULL;
-		}
+		else
+			kref_get(&tape->kref);
 	}
 	mutex_unlock(&idetape_ref_mutex);
 	return tape;
@@ -343,9 +342,11 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
 
 static void ide_tape_put(struct ide_tape_obj *tape)
 {
+	ide_drive_t *drive = tape->drive;
+
 	mutex_lock(&idetape_ref_mutex);
-	ide_device_put(tape->drive);
 	kref_put(&tape->kref, ide_tape_release);
+	ide_device_put(drive);
 	mutex_unlock(&idetape_ref_mutex);
 }
 
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index e0c8fe7d9fe..3187215e8f8 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -160,7 +160,7 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev)
 	return dev->irq;
 }
 
-static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif)
+static u8 atp86x_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
@@ -307,7 +307,7 @@ static struct pci_driver driver = {
 	.name		= "AEC62xx_IDE",
 	.id_table	= aec62xx_pci_tbl,
 	.probe		= aec62xx_init_one,
-	.remove		= aec62xx_remove,
+	.remove		= __devexit_p(aec62xx_remove),
 };
 
 static int __init aec62xx_ide_init(void)
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index b582687e0cd..d647526af55 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -371,7 +371,7 @@ static int ali_cable_override(struct pci_dev *pdev)
  *	FIXME: frobs bits that are not defined on newer ALi devicea
  */
 
-static u8 __devinit ali_cable_detect(ide_hwif_t *hwif)
+static u8 ali_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long flags;
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 2cea7bf51a0..1e66a960a96 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -175,7 +175,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev)
 	return dev->irq;
 }
 
-static u8 __devinit amd_cable_detect(ide_hwif_t *hwif)
+static u8 amd_cable_detect(ide_hwif_t *hwif)
 {
 	if ((amd_80w >> hwif->channel) & 1)
 		return ATA_CBL_PATA80;
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 332f08f43b5..41f6cb6c163 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -119,7 +119,7 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	spin_unlock_irqrestore(&atiixp_lock, flags);
 }
 
-static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif)
+static u8 atiixp_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	u8 udma_mode = 0, ch = hwif->channel;
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 1360b4fa9fd..e064398e03b 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -354,7 +354,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev)
 	return 0;
 }
 
-static u8 __devinit cmd64x_cable_detect(ide_hwif_t *hwif)
+static u8 cmd64x_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev  *dev	= to_pci_dev(hwif->dev);
 	u8 bmidecsr = 0, mask	= hwif->channel ? 0x02 : 0x01;
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index c0364b287f1..151844fcbb0 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -96,6 +96,7 @@ static const struct ide_port_ops cs5520_port_ops = {
 
 static const struct ide_port_info cyrix_chipset __devinitdata = {
 	.name		= DRV_NAME,
+	.enablebits	= { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } },
 	.port_ops	= &cs5520_port_ops,
 	.host_flags	= IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520,
 	.pio_mask	= ATA_PIO4,
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index f7b50cdeefa..dd3dc23af99 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -153,7 +153,7 @@ static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	cs5535_set_speed(drive, XFER_PIO_0 + pio);
 }
 
-static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif)
+static u8 cs5535_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 bit;
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index bfae2f882f4..e6d8ee88d56 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -447,7 +447,7 @@ static struct pci_driver driver = {
 	.name		= "Cypress_IDE",
 	.id_table	= cy82c693_pci_tbl,
 	.probe		= cy82c693_init_one,
-	.remove		= cy82c693_remove,
+	.remove		= __devexit_p(cy82c693_remove),
 };
 
 static int __init cy82c693_ide_init(void)
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 5271b246b88..c37ab174381 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -613,6 +613,14 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
 	return 0;
 }
 
+static struct hpt_info *hpt3xx_get_info(struct device *dev)
+{
+	struct ide_host *host	= dev_get_drvdata(dev);
+	struct hpt_info *info	= (struct hpt_info *)host->host_priv;
+
+	return dev == host->dev[1] ? info + 1 : info;
+}
+
 /*
  * The Marvell bridge chips used on the HighPoint SATA cards do not seem
  * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
@@ -621,9 +629,7 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
 static u8 hpt3xx_udma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	u8 mask 		= hwif->ultra_mask;
 
 	switch (info->chip_type) {
@@ -662,9 +668,7 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
 static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 
 	switch (info->chip_type) {
 	case HPT372 :
@@ -700,8 +704,7 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	struct hpt_timings *t	= info->timings;
 	u8  itr_addr		= 0x40 + (drive->dn * 4);
 	u32 old_itr		= 0;
@@ -744,8 +747,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 
 	if (drive->quirk_list) {
 		if (info->chip_type >= HPT370) {
@@ -973,8 +975,7 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
 static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
 {
 	unsigned long io_base	= pci_resource_start(dev, 4);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (&dev->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(&dev->dev);
 	const char *name	= DRV_NAME;
 	u8 pci_clk,  dpll_clk	= 0;	/* PCI and DPLL clock in MHz */
 	u8 chip_type;
@@ -1214,11 +1215,10 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
 	return dev->irq;
 }
 
-static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
+static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	u8 chip_type		= info->chip_type;
 	u8 scr1 = 0, ata66	= hwif->channel ? 0x01 : 0x02;
 
@@ -1262,8 +1262,7 @@ static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
 static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	int serialize		= HPT_SERIALIZE_IO;
 	u8  chip_type		= info->chip_type;
 	u8  new_mcr, old_mcr	= 0;
@@ -1620,7 +1619,7 @@ static struct pci_driver driver = {
 	.name		= "HPT366_IDE",
 	.id_table	= hpt366_pci_tbl,
 	.probe		= hpt366_init_one,
-	.remove		= hpt366_remove,
+	.remove		= __devexit_p(hpt366_remove),
 };
 
 static int __init hpt366_ide_init(void)
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 6eba8f18826..652e47dd7e8 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -141,7 +141,7 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	}
 }
 
-static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif)
+static u8 it8213_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 reg42h = 0;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index e16a1d113a2..4a1508a707c 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -428,7 +428,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
  *	the needed logic onboard.
  */
 
-static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif)
+static u8 it821x_cable_detect(ide_hwif_t *hwif)
 {
 	/* The reference driver also only does disk side */
 	return ATA_CBL_PATA80;
@@ -443,7 +443,7 @@ static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif)
  *	final tuning that is needed, or fixups to work around bugs.
  */
 
-static void __devinit it821x_quirkproc(ide_drive_t *drive)
+static void it821x_quirkproc(ide_drive_t *drive)
 {
 	struct it821x_dev *itdev = ide_get_hwifdata(drive->hwif);
 	struct hd_driveid *id = drive->id;
@@ -686,7 +686,7 @@ static struct pci_driver driver = {
 	.name		= "ITE821x IDE",
 	.id_table	= it821x_pci_tbl,
 	.probe		= it821x_init_one,
-	.remove		= it821x_remove,
+	.remove		= __devexit_p(it821x_remove),
 };
 
 static int __init it821x_ide_init(void)
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 545b6e172d9..bb9d09d8f19 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -27,7 +27,7 @@ typedef enum {
  *	Returns the cable type.
  */
 
-static u8 __devinit jmicron_cable_detect(ide_hwif_t *hwif)
+static u8 jmicron_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 998615fa285..d477da6b585 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -193,7 +193,7 @@ static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	}
 }
 
-static u8 __devinit pdcnew_cable_detect(ide_hwif_t *hwif)
+static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
 {
 	if (get_indexed_reg(hwif, 0x0b) & 0x04)
 		return ATA_CBL_PATA40;
@@ -566,7 +566,7 @@ static struct pci_driver driver = {
 	.name		= "Promise_IDE",
 	.id_table	= pdc202new_pci_tbl,
 	.probe		= pdc202new_init_one,
-	.remove		= pdc202new_remove,
+	.remove		= __devexit_p(pdc202new_remove),
 };
 
 static int __init pdc202new_ide_init(void)
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 6ff2def58da..de9a2740046 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -117,7 +117,7 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
 }
 
-static u8 __devinit pdc2026x_cable_detect(ide_hwif_t *hwif)
+static u8 pdc2026x_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10);
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 7fc3022dcf6..30cfc815fe3 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -256,7 +256,7 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0, }
 };
 
-static u8 __devinit piix_cable_detect(ide_hwif_t *hwif)
+static u8 piix_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	const struct ich_laptop *lap = &ich_laptop[0];
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 94a7ab86423..44cccd1e086 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -827,7 +827,7 @@ static void __devinit init_iops_scc(ide_hwif_t *hwif)
 	init_mmio_iops_scc(hwif);
 }
 
-static u8 __devinit scc_cable_detect(ide_hwif_t *hwif)
+static u8 scc_cable_detect(ide_hwif_t *hwif)
 {
 	return ATA_CBL_PATA80;
 }
@@ -954,7 +954,7 @@ static struct pci_driver driver = {
 	.name = "SCC IDE",
 	.id_table = scc_pci_tbl,
 	.probe = scc_init_one,
-	.remove = scc_remove,
+	.remove = __devexit_p(scc_remove),
 };
 
 static int scc_ide_init(void)
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index d173f293772..c3bdc6e51a4 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -272,7 +272,7 @@ static unsigned int __devinit init_chipset_svwks(struct pci_dev *dev)
 	return dev->irq;
 }
 
-static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif)
+static u8 ata66_svwks_svwks(ide_hwif_t *hwif)
 {
 	return ATA_CBL_PATA80;
 }
@@ -284,7 +284,7 @@ static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif)
  * Bit 14 clear = primary IDE channel does not have 80-pin cable.
  * Bit 14 set   = primary IDE channel has 80-pin cable.
  */
-static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
+static u8 ata66_svwks_dell(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 
@@ -303,7 +303,7 @@ static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
  *
  * WARNING: this only works on Alpine hardware!
  */
-static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
+static u8 ata66_svwks_cobalt(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 
@@ -315,7 +315,7 @@ static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
 	return ATA_CBL_PATA40;
 }
 
-static u8 __devinit svwks_cable_detect(ide_hwif_t *hwif)
+static u8 svwks_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 42eef19a18f..681306c9d79 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -621,9 +621,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
 	    DRV_NAME)) {
 		printk(KERN_ERR
-			"%s : %s -- ERROR, Addresses "
+			"%s %s: -- ERROR, Addresses "
 			"0x%p to 0x%p ALREADY in use\n",
-		       __func__, DRV_NAME, (void *) cmd_phys_base,
+		       DRV_NAME, pci_name(dev), (void *)cmd_phys_base,
 		       (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
 		return -ENOMEM;
 	}
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index b8ad9ad6cf0..db2b88a369a 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -639,7 +639,7 @@ static int is_dev_seagate_sata(ide_drive_t *drive)
  *	that can occur before we know what drives are present.
  */
 
-static void __devinit sil_quirkproc(ide_drive_t *drive)
+static void sil_quirkproc(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 
@@ -679,7 +679,7 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif)
  *	Check for the presence of an ATA66 capable cable on the interface.
  */
 
-static u8 __devinit sil_cable_detect(ide_hwif_t *hwif)
+static u8 sil_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	unsigned long addr	= siimage_selreg(hwif, 0);
@@ -832,7 +832,7 @@ static struct pci_driver driver = {
 	.name		= "SiI_IDE",
 	.id_table	= siimage_pci_tbl,
 	.probe		= siimage_init_one,
-	.remove		= siimage_remove,
+	.remove		= __devexit_p(siimage_remove),
 };
 
 static int __init siimage_ide_init(void)
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index cc95f90b53b..5efe21d6ef9 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -518,7 +518,7 @@ static const struct sis_laptop sis_laptop[] = {
 	{ 0, }
 };
 
-static u8 __devinit sis_cable_detect(ide_hwif_t *hwif)
+static u8 sis_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	const struct sis_laptop *lap = &sis_laptop[0];
@@ -610,7 +610,7 @@ static struct pci_driver driver = {
 	.name		= "SIS_IDE",
 	.id_table	= sis5513_pci_tbl,
 	.probe		= sis5513_init_one,
-	.remove		= sis5513_remove,
+	.remove		= __devexit_p(sis5513_remove),
 };
 
 static int __init sis5513_ide_init(void)
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 13d1fa491f2..866d6c65e3a 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -116,7 +116,7 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	}
 }
 
-static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif)
+static u8 slc90e66_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index b1cb8a9ce5a..927277c54ec 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -131,7 +131,7 @@ static void tc86c001_dma_start(ide_drive_t *drive)
 	ide_dma_start(drive);
 }
 
-static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif)
+static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long sc_base = pci_resource_start(dev, 5);
@@ -249,7 +249,7 @@ static struct pci_driver driver = {
 	.name		= "TC86C001",
 	.id_table	= tc86c001_pci_tbl,
 	.probe		= tc86c001_init_one,
-	.remove		= tc86c001_remove,
+	.remove		= __devexit_p(tc86c001_remove),
 };
 
 static int __init tc86c001_ide_init(void)
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 454d2bf62dc..94fb9ab3223 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -352,7 +352,7 @@ static int via_cable_override(struct pci_dev *pdev)
 	return 0;
 }
 
-static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif)
+static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	struct ide_host *host = pci_get_drvdata(pdev);
@@ -491,7 +491,7 @@ static struct pci_driver driver = {
 	.name 		= "VIA_IDE",
 	.id_table 	= via_pci_tbl,
 	.probe 		= via_init_one,
-	.remove		= via_remove,
+	.remove		= __devexit_p(via_remove),
 };
 
 static int __init via_ide_init(void)
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index c521bf6e1bf..fa2be26272d 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1086,6 +1086,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	/* Make sure we have sane timings */
 	sanitize_timings(pmif);
 
+	host = ide_host_alloc(&d, hws);
+	if (host == NULL)
+		return -ENOMEM;
+	hwif = host->ports[0];
+
 #ifndef CONFIG_PPC64
 	/* XXX FIXME: Media bay stuff need re-organizing */
 	if (np->parent && np->parent->name
@@ -1119,11 +1124,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 			 pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
 			 pmif->mediabay ? " (mediabay)" : "", hw->irq);
 
-	rc = ide_host_add(&d, hws, &host);
-	if (rc)
+	rc = ide_host_register(host, &d, hws);
+	if (rc) {
+		ide_host_free(host);
 		return rc;
-
-	hwif = host->ports[0];
+	}
 
 	return 0;
 }
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 994a21e5a0a..16240a78965 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -844,7 +844,7 @@ static struct node_entry *nodemgr_create_node(octlet_t guid, struct csr1212_csr
 	ne->host = host;
 	ne->nodeid = nodeid;
 	ne->generation = generation;
-	ne->needs_probe = 1;
+	ne->needs_probe = true;
 
 	ne->guid = guid;
 	ne->guid_vendor_id = (guid >> 40) & 0xffffff;
@@ -1144,7 +1144,7 @@ static void nodemgr_process_root_directory(struct host_info *hi, struct node_ent
 	struct csr1212_keyval *kv, *vendor_name_kv = NULL;
 	u8 last_key_id = 0;
 
-	ne->needs_probe = 0;
+	ne->needs_probe = false;
 
 	csr1212_for_each_dir_entry(ne->csr, kv, ne->csr->root_kv, dentry) {
 		switch (kv->key.id) {
@@ -1295,7 +1295,7 @@ static void nodemgr_update_node(struct node_entry *ne, struct csr1212_csr *csr,
 		nodemgr_update_bus_options(ne);
 
 		/* Mark the node as new, so it gets re-probed */
-		ne->needs_probe = 1;
+		ne->needs_probe = true;
 	} else {
 		/* old cache is valid, so update its generation */
 		struct nodemgr_csr_info *ci = ne->csr->private;
@@ -1566,57 +1566,60 @@ static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int ge
 struct probe_param {
 	struct host_info *hi;
 	int generation;
+	bool probe_now;
 };
 
-static int __nodemgr_node_probe(struct device *dev, void *data)
+static int node_probe(struct device *dev, void *data)
 {
-	struct probe_param *param = (struct probe_param *)data;
+	struct probe_param *p = data;
 	struct node_entry *ne;
 
+	if (p->generation != get_hpsb_generation(p->hi->host))
+		return -EAGAIN;
+
 	ne = container_of(dev, struct node_entry, node_dev);
-	if (!ne->needs_probe)
-		nodemgr_probe_ne(param->hi, ne, param->generation);
-	if (ne->needs_probe)
-		nodemgr_probe_ne(param->hi, ne, param->generation);
+	if (ne->needs_probe == p->probe_now)
+		nodemgr_probe_ne(p->hi, ne, p->generation);
 	return 0;
 }
 
 static void nodemgr_node_probe(struct host_info *hi, int generation)
 {
-	struct hpsb_host *host = hi->host;
-	struct probe_param param;
+	struct probe_param p;
 
-	param.hi = hi;
-	param.generation = generation;
-	/* Do some processing of the nodes we've probed. This pulls them
+	p.hi = hi;
+	p.generation = generation;
+	/*
+	 * Do some processing of the nodes we've probed. This pulls them
 	 * into the sysfs layer if needed, and can result in processing of
 	 * unit-directories, or just updating the node and it's
 	 * unit-directories.
 	 *
 	 * Run updates before probes. Usually, updates are time-critical
-	 * while probes are time-consuming. (Well, those probes need some
-	 * improvement...) */
-
-	class_for_each_device(&nodemgr_ne_class, NULL, &param,
-			      __nodemgr_node_probe);
-
-	/* If we had a bus reset while we were scanning the bus, it is
-	 * possible that we did not probe all nodes.  In that case, we
-	 * skip the clean up for now, since we could remove nodes that
-	 * were still on the bus.  Another bus scan is pending which will
-	 * do the clean up eventually.
+	 * while probes are time-consuming.
 	 *
+	 * Meanwhile, another bus reset may have happened. In this case we
+	 * skip everything here and let the next bus scan handle it.
+	 * Otherwise we may prematurely remove nodes which are still there.
+	 */
+	p.probe_now = false;
+	if (class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe) != 0)
+		return;
+
+	p.probe_now = true;
+	if (class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe) != 0)
+		return;
+	/*
 	 * Now let's tell the bus to rescan our devices. This may seem
 	 * like overhead, but the driver-model core will only scan a
 	 * device for a driver when either the device is added, or when a
 	 * new driver is added. A bus reset is a good reason to rescan
 	 * devices that were there before.  For example, an sbp2 device
 	 * may become available for login, if the host that held it was
-	 * just removed.  */
-
-	if (generation == get_hpsb_generation(host))
-		if (bus_rescan_devices(&ieee1394_bus_type))
-			HPSB_DEBUG("bus_rescan_devices had an error");
+	 * just removed.
+	 */
+	if (bus_rescan_devices(&ieee1394_bus_type) != 0)
+		HPSB_DEBUG("bus_rescan_devices had an error");
 }
 
 static int nodemgr_send_resume_packet(struct hpsb_host *host)
diff --git a/drivers/ieee1394/nodemgr.h b/drivers/ieee1394/nodemgr.h
index 919e92e2a95..6eb26465a84 100644
--- a/drivers/ieee1394/nodemgr.h
+++ b/drivers/ieee1394/nodemgr.h
@@ -97,7 +97,7 @@ struct node_entry {
 	struct hpsb_host *host;		/* Host this node is attached to */
 	nodeid_t nodeid;		/* NodeID */
 	struct bus_options busopt;	/* Bus Options */
-	int needs_probe;
+	bool needs_probe;
 	unsigned int generation;	/* Synced with hpsb generation */
 
 	/* The following is read from the config rom */
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 9cbf3154d24..1d6ad343553 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -731,15 +731,26 @@ static int sbp2_update(struct unit_directory *ud)
 {
 	struct sbp2_lu *lu = ud->device.driver_data;
 
-	if (sbp2_reconnect_device(lu)) {
-		/* Reconnect has failed. Perhaps we didn't reconnect fast
-		 * enough. Try a regular login, but first log out just in
-		 * case of any weirdness. */
+	if (sbp2_reconnect_device(lu) != 0) {
+		/*
+		 * Reconnect failed.  If another bus reset happened,
+		 * let nodemgr proceed and call sbp2_update again later
+		 * (or sbp2_remove if this node went away).
+		 */
+		if (!hpsb_node_entry_valid(lu->ne))
+			return 0;
+		/*
+		 * Or the target rejected the reconnect because we weren't
+		 * fast enough.  Try a regular login, but first log out
+		 * just in case of any weirdness.
+		 */
 		sbp2_logout_device(lu);
 
-		if (sbp2_login_device(lu)) {
-			/* Login failed too, just fail, and the backend
-			 * will call our sbp2_remove for us */
+		if (sbp2_login_device(lu) != 0) {
+			if (!hpsb_node_entry_valid(lu->ne))
+				return 0;
+
+			/* Maybe another initiator won the login. */
 			SBP2_ERR("Failed to reconnect to sbp2 device!");
 			return -EBUSY;
 		}
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index e980ff3335d..d951896ff7f 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -155,9 +155,7 @@ struct cma_multicast {
 	} multicast;
 	struct list_head	list;
 	void			*context;
-	struct sockaddr		addr;
-	u8			pad[sizeof(struct sockaddr_in6) -
-				    sizeof(struct sockaddr)];
+	struct sockaddr_storage	addr;
 };
 
 struct cma_work {
@@ -786,8 +784,8 @@ static void cma_cancel_operation(struct rdma_id_private *id_priv,
 		cma_cancel_route(id_priv);
 		break;
 	case CMA_LISTEN:
-		if (cma_any_addr(&id_priv->id.route.addr.src_addr) &&
-		    !id_priv->cma_dev)
+		if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr)
+				&& !id_priv->cma_dev)
 			cma_cancel_listens(id_priv);
 		break;
 	default:
@@ -1026,7 +1024,7 @@ static struct rdma_id_private *cma_new_conn_id(struct rdma_cm_id *listen_id,
 		rt->path_rec[1] = *ib_event->param.req_rcvd.alternate_path;
 
 	ib_addr_set_dgid(&rt->addr.dev_addr, &rt->path_rec[0].dgid);
-	ret = rdma_translate_ip(&id->route.addr.src_addr,
+	ret = rdma_translate_ip((struct sockaddr *) &id->route.addr.src_addr,
 				&id->route.addr.dev_addr);
 	if (ret)
 		goto destroy_id;
@@ -1064,7 +1062,7 @@ static struct rdma_id_private *cma_new_udp_id(struct rdma_cm_id *listen_id,
 	cma_save_net_info(&id->route.addr, &listen_id->route.addr,
 			  ip_ver, port, src, dst);
 
-	ret = rdma_translate_ip(&id->route.addr.src_addr,
+	ret = rdma_translate_ip((struct sockaddr *) &id->route.addr.src_addr,
 				&id->route.addr.dev_addr);
 	if (ret)
 		goto err;
@@ -1377,7 +1375,7 @@ static int cma_ib_listen(struct rdma_id_private *id_priv)
 	if (IS_ERR(id_priv->cm_id.ib))
 		return PTR_ERR(id_priv->cm_id.ib);
 
-	addr = &id_priv->id.route.addr.src_addr;
+	addr = (struct sockaddr *) &id_priv->id.route.addr.src_addr;
 	svc_id = cma_get_service_id(id_priv->id.ps, addr);
 	if (cma_any_addr(addr))
 		ret = ib_cm_listen(id_priv->cm_id.ib, svc_id, 0, NULL);
@@ -1443,7 +1441,7 @@ static void cma_listen_on_dev(struct rdma_id_private *id_priv,
 
 	dev_id_priv->state = CMA_ADDR_BOUND;
 	memcpy(&id->route.addr.src_addr, &id_priv->id.route.addr.src_addr,
-	       ip_addr_size(&id_priv->id.route.addr.src_addr));
+	       ip_addr_size((struct sockaddr *) &id_priv->id.route.addr.src_addr));
 
 	cma_attach_to_dev(dev_id_priv, cma_dev);
 	list_add_tail(&dev_id_priv->listen_list, &id_priv->listen_list);
@@ -1563,13 +1561,14 @@ static int cma_query_ib_route(struct rdma_id_private *id_priv, int timeout_ms,
 	path_rec.pkey = cpu_to_be16(ib_addr_get_pkey(&addr->dev_addr));
 	path_rec.numb_path = 1;
 	path_rec.reversible = 1;
-	path_rec.service_id = cma_get_service_id(id_priv->id.ps, &addr->dst_addr);
+	path_rec.service_id = cma_get_service_id(id_priv->id.ps,
+							(struct sockaddr *) &addr->dst_addr);
 
 	comp_mask = IB_SA_PATH_REC_DGID | IB_SA_PATH_REC_SGID |
 		    IB_SA_PATH_REC_PKEY | IB_SA_PATH_REC_NUMB_PATH |
 		    IB_SA_PATH_REC_REVERSIBLE | IB_SA_PATH_REC_SERVICE_ID;
 
-	if (addr->src_addr.sa_family == AF_INET) {
+	if (addr->src_addr.ss_family == AF_INET) {
 		path_rec.qos_class = cpu_to_be16((u16) id_priv->tos);
 		comp_mask |= IB_SA_PATH_REC_QOS_CLASS;
 	} else {
@@ -1848,7 +1847,7 @@ static int cma_resolve_loopback(struct rdma_id_private *id_priv)
 	ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid);
 	ib_addr_set_dgid(&id_priv->id.route.addr.dev_addr, &gid);
 
-	if (cma_zero_addr(&id_priv->id.route.addr.src_addr)) {
+	if (cma_zero_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr)) {
 		src_in = (struct sockaddr_in *)&id_priv->id.route.addr.src_addr;
 		dst_in = (struct sockaddr_in *)&id_priv->id.route.addr.dst_addr;
 		src_in->sin_family = dst_in->sin_family;
@@ -1897,7 +1896,7 @@ int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr,
 	if (cma_any_addr(dst_addr))
 		ret = cma_resolve_loopback(id_priv);
 	else
-		ret = rdma_resolve_ip(&addr_client, &id->route.addr.src_addr,
+		ret = rdma_resolve_ip(&addr_client, (struct sockaddr *) &id->route.addr.src_addr,
 				      dst_addr, &id->route.addr.dev_addr,
 				      timeout_ms, addr_handler, id_priv);
 	if (ret)
@@ -2021,11 +2020,11 @@ static int cma_use_port(struct idr *ps, struct rdma_id_private *id_priv)
 	 * We don't support binding to any address if anyone is bound to
 	 * a specific address on the same port.
 	 */
-	if (cma_any_addr(&id_priv->id.route.addr.src_addr))
+	if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr))
 		return -EADDRNOTAVAIL;
 
 	hlist_for_each_entry(cur_id, node, &bind_list->owners, node) {
-		if (cma_any_addr(&cur_id->id.route.addr.src_addr))
+		if (cma_any_addr((struct sockaddr *) &cur_id->id.route.addr.src_addr))
 			return -EADDRNOTAVAIL;
 
 		cur_sin = (struct sockaddr_in *) &cur_id->id.route.addr.src_addr;
@@ -2060,7 +2059,7 @@ static int cma_get_port(struct rdma_id_private *id_priv)
 	}
 
 	mutex_lock(&lock);
-	if (cma_any_port(&id_priv->id.route.addr.src_addr))
+	if (cma_any_port((struct sockaddr *) &id_priv->id.route.addr.src_addr))
 		ret = cma_alloc_any_port(ps, id_priv);
 	else
 		ret = cma_use_port(ps, id_priv);
@@ -2232,7 +2231,7 @@ static int cma_resolve_ib_udp(struct rdma_id_private *id_priv,
 
 	req.path = route->path_rec;
 	req.service_id = cma_get_service_id(id_priv->id.ps,
-					    &route->addr.dst_addr);
+					    (struct sockaddr *) &route->addr.dst_addr);
 	req.timeout_ms = 1 << (CMA_CM_RESPONSE_TIMEOUT - 8);
 	req.max_cm_retries = CMA_MAX_CM_RETRIES;
 
@@ -2283,7 +2282,7 @@ static int cma_connect_ib(struct rdma_id_private *id_priv,
 		req.alternate_path = &route->path_rec[1];
 
 	req.service_id = cma_get_service_id(id_priv->id.ps,
-					    &route->addr.dst_addr);
+					    (struct sockaddr *) &route->addr.dst_addr);
 	req.qp_num = id_priv->qp_num;
 	req.qp_type = IB_QPT_RC;
 	req.starting_psn = id_priv->seq_num;
@@ -2667,7 +2666,7 @@ static int cma_join_ib_multicast(struct rdma_id_private *id_priv,
 	if (ret)
 		return ret;
 
-	cma_set_mgid(id_priv, &mc->addr, &rec.mgid);
+	cma_set_mgid(id_priv, (struct sockaddr *) &mc->addr, &rec.mgid);
 	if (id_priv->id.ps == RDMA_PS_UDP)
 		rec.qkey = cpu_to_be32(RDMA_UDP_QKEY);
 	ib_addr_get_sgid(dev_addr, &rec.port_gid);
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index d0ef7d61c03..3af2b84cd83 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -133,7 +133,7 @@ static void ack_recv(struct mad_rmpp_recv *rmpp_recv,
 	msg = ib_create_send_mad(&rmpp_recv->agent->agent, recv_wc->wc->src_qp,
 				 recv_wc->wc->pkey_index, 1, hdr_len,
 				 0, GFP_KERNEL);
-	if (!msg)
+	if (IS_ERR(msg))
 		return;
 
 	format_ack(msg, (struct ib_rmpp_mad *) recv_wc->recv_buf.mad, rmpp_recv);
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index b41dd26bbfa..3ddacf39b7b 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -81,9 +81,7 @@ struct ucma_multicast {
 
 	u64			uid;
 	struct list_head	list;
-	struct sockaddr		addr;
-	u8			pad[sizeof(struct sockaddr_in6) -
-				    sizeof(struct sockaddr)];
+	struct sockaddr_storage	addr;
 };
 
 struct ucma_event {
@@ -603,11 +601,11 @@ static ssize_t ucma_query_route(struct ucma_file *file,
 		return PTR_ERR(ctx);
 
 	memset(&resp, 0, sizeof resp);
-	addr = &ctx->cm_id->route.addr.src_addr;
+	addr = (struct sockaddr *) &ctx->cm_id->route.addr.src_addr;
 	memcpy(&resp.src_addr, addr, addr->sa_family == AF_INET ?
 				     sizeof(struct sockaddr_in) :
 				     sizeof(struct sockaddr_in6));
-	addr = &ctx->cm_id->route.addr.dst_addr;
+	addr = (struct sockaddr *) &ctx->cm_id->route.addr.dst_addr;
 	memcpy(&resp.dst_addr, addr, addr->sa_family == AF_INET ?
 				     sizeof(struct sockaddr_in) :
 				     sizeof(struct sockaddr_in6));
@@ -913,7 +911,7 @@ static ssize_t ucma_join_multicast(struct ucma_file *file,
 
 	mc->uid = cmd.uid;
 	memcpy(&mc->addr, &cmd.addr, sizeof cmd.addr);
-	ret = rdma_join_multicast(ctx->cm_id, &mc->addr, mc);
+	ret = rdma_join_multicast(ctx->cm_id, (struct sockaddr *) &mc->addr, mc);
 	if (ret)
 		goto err2;
 
@@ -929,7 +927,7 @@ static ssize_t ucma_join_multicast(struct ucma_file *file,
 	return 0;
 
 err3:
-	rdma_leave_multicast(ctx->cm_id, &mc->addr);
+	rdma_leave_multicast(ctx->cm_id, (struct sockaddr *) &mc->addr);
 	ucma_cleanup_mc_events(mc);
 err2:
 	mutex_lock(&mut);
@@ -975,7 +973,7 @@ static ssize_t ucma_leave_multicast(struct ucma_file *file,
 		goto out;
 	}
 
-	rdma_leave_multicast(mc->ctx->cm_id, &mc->addr);
+	rdma_leave_multicast(mc->ctx->cm_id, (struct sockaddr *) &mc->addr);
 	mutex_lock(&mc->ctx->file->mut);
 	ucma_cleanup_mc_events(mc);
 	list_del(&mc->list);
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index f6d5747153a..4dcf08b3fd8 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -725,9 +725,9 @@ static int __cxio_tpt_op(struct cxio_rdev *rdev_p, u32 reset_tpt_entry,
 				V_TPT_STAG_TYPE(type) | V_TPT_PDID(pdid));
 		BUG_ON(page_size >= 28);
 		tpt.flags_pagesize_qpid = cpu_to_be32(V_TPT_PERM(perm) |
-				F_TPT_MW_BIND_ENABLE |
-				V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) |
-				V_TPT_PAGE_SIZE(page_size));
+			((perm & TPT_MW_BIND) ? F_TPT_MW_BIND_ENABLE : 0) |
+			V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) |
+			V_TPT_PAGE_SIZE(page_size));
 		tpt.rsvd_pbl_addr = reset_tpt_entry ? 0 :
 				    cpu_to_be32(V_TPT_PBL_ADDR(PBL_OFF(rdev_p, pbl_addr)>>3));
 		tpt.len = cpu_to_be32(len);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index b89640aa6e1..eb778bfd6f6 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -1187,28 +1187,6 @@ static ssize_t show_rev(struct device *dev, struct device_attribute *attr,
 	return sprintf(buf, "%d\n", iwch_dev->rdev.t3cdev_p->type);
 }
 
-static int fw_supports_fastreg(struct iwch_dev *iwch_dev)
-{
-	struct ethtool_drvinfo info;
-	struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
-	char *cp, *next;
-	unsigned fw_maj, fw_min;
-
-	rtnl_lock();
-	lldev->ethtool_ops->get_drvinfo(lldev, &info);
-	rtnl_unlock();
-
-	next = info.fw_version+1;
-	cp = strsep(&next, ".");
-	sscanf(cp, "%i", &fw_maj);
-	cp = strsep(&next, ".");
-	sscanf(cp, "%i", &fw_min);
-
-	PDBG("%s maj %u min %u\n", __func__, fw_maj, fw_min);
-
-	return fw_maj > 6 || (fw_maj == 6 && fw_min > 0);
-}
-
 static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct iwch_dev *iwch_dev = container_of(dev, struct iwch_dev,
@@ -1325,12 +1303,12 @@ int iwch_register_device(struct iwch_dev *dev)
 	memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid));
 	memcpy(&dev->ibdev.node_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6);
 	dev->ibdev.owner = THIS_MODULE;
-	dev->device_cap_flags = IB_DEVICE_LOCAL_DMA_LKEY | IB_DEVICE_MEM_WINDOW;
+	dev->device_cap_flags = IB_DEVICE_LOCAL_DMA_LKEY |
+				IB_DEVICE_MEM_WINDOW |
+				IB_DEVICE_MEM_MGT_EXTENSIONS;
 
 	/* cxgb3 supports STag 0. */
 	dev->ibdev.local_dma_lkey = 0;
-	if (fw_supports_fastreg(dev))
-		dev->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
 
 	dev->ibdev.uverbs_cmd_mask =
 	    (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h
index f5ceca05c43..a237d49bdcc 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.h
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h
@@ -293,9 +293,16 @@ static inline u32 iwch_ib_to_tpt_access(int acc)
 	return (acc & IB_ACCESS_REMOTE_WRITE ? TPT_REMOTE_WRITE : 0) |
 	       (acc & IB_ACCESS_REMOTE_READ ? TPT_REMOTE_READ : 0) |
 	       (acc & IB_ACCESS_LOCAL_WRITE ? TPT_LOCAL_WRITE : 0) |
+	       (acc & IB_ACCESS_MW_BIND ? TPT_MW_BIND : 0) |
 	       TPT_LOCAL_READ;
 }
 
+static inline u32 iwch_ib_to_tpt_bind_access(int acc)
+{
+	return (acc & IB_ACCESS_REMOTE_WRITE ? TPT_REMOTE_WRITE : 0) |
+	       (acc & IB_ACCESS_REMOTE_READ ? TPT_REMOTE_READ : 0);
+}
+
 enum iwch_mmid_state {
 	IWCH_STAG_STATE_VALID,
 	IWCH_STAG_STATE_INVALID
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 9a3be3a9d5d..3e4585c2318 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -565,7 +565,7 @@ int iwch_bind_mw(struct ib_qp *qp,
 	wqe->bind.type = TPT_VATO;
 
 	/* TBD: check perms */
-	wqe->bind.perms = iwch_ib_to_tpt_access(mw_bind->mw_access_flags);
+	wqe->bind.perms = iwch_ib_to_tpt_bind_access(mw_bind->mw_access_flags);
 	wqe->bind.mr_stag = cpu_to_be32(mw_bind->mr->lkey);
 	wqe->bind.mw_stag = cpu_to_be32(mw->rkey);
 	wqe->bind.mw_len = cpu_to_be32(mw_bind->length);
@@ -879,20 +879,13 @@ static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp,
 		(qhp->attr.mpa_attr.xmit_marker_enabled << 1) |
 		(qhp->attr.mpa_attr.crc_enabled << 2);
 
-	/*
-	 * XXX - The IWCM doesn't quite handle getting these
-	 * attrs set before going into RTS.  For now, just turn
-	 * them on always...
-	 */
-#if 0
-	init_attr.qpcaps = qhp->attr.enableRdmaRead |
-		(qhp->attr.enableRdmaWrite << 1) |
-		(qhp->attr.enableBind << 2) |
-		(qhp->attr.enable_stag0_fastreg << 3) |
-		(qhp->attr.enable_stag0_fastreg << 4);
-#else
-	init_attr.qpcaps = 0x1f;
-#endif
+	init_attr.qpcaps = uP_RI_QP_RDMA_READ_ENABLE |
+			   uP_RI_QP_RDMA_WRITE_ENABLE |
+			   uP_RI_QP_BIND_ENABLE;
+	if (!qhp->ibqp.uobject)
+		init_attr.qpcaps |= uP_RI_QP_STAG0_ENABLE |
+				    uP_RI_QP_FAST_REGISTER_ENABLE;
+
 	init_attr.tcp_emss = qhp->ep->emss;
 	init_attr.ord = qhp->attr.max_ord;
 	init_attr.ird = qhp->attr.max_ird;
@@ -900,8 +893,6 @@ static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp,
 	init_attr.qp_dma_size = (1UL << qhp->wq.size_log2);
 	init_attr.rqe_count = iwch_rqes_posted(qhp);
 	init_attr.flags = qhp->attr.mpa_attr.initiator ? MPA_INITIATOR : 0;
-	if (!qhp->ibqp.uobject)
-		init_attr.flags |= PRIV_QP;
 	if (peer2peer) {
 		init_attr.rtr_type = RTR_READ;
 		if (init_attr.ord == 0 && qhp->attr.mpa_attr.initiator)
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 0b0618edd64..1ab919f836a 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -156,6 +156,14 @@ struct ehca_mod_qp_parm {
 
 #define EHCA_MOD_QP_PARM_MAX 4
 
+#define QMAP_IDX_MASK 0xFFFFULL
+
+/* struct for tracking if cqes have been reported to the application */
+struct ehca_qmap_entry {
+	u16 app_wr_id;
+	u16 reported;
+};
+
 struct ehca_qp {
 	union {
 		struct ib_qp ib_qp;
@@ -165,6 +173,7 @@ struct ehca_qp {
 	enum ehca_ext_qp_type ext_type;
 	enum ib_qp_state state;
 	struct ipz_queue ipz_squeue;
+	struct ehca_qmap_entry *sq_map;
 	struct ipz_queue ipz_rqueue;
 	struct h_galpas galpas;
 	u32 qkey;
diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h
index 818803057eb..5d28e3e98a2 100644
--- a/drivers/infiniband/hw/ehca/ehca_qes.h
+++ b/drivers/infiniband/hw/ehca/ehca_qes.h
@@ -213,6 +213,7 @@ struct ehca_wqe {
 #define WC_STATUS_ERROR_BIT 0x80000000
 #define WC_STATUS_REMOTE_ERROR_FLAGS 0x0000F800
 #define WC_STATUS_PURGE_BIT 0x10
+#define WC_SEND_RECEIVE_BIT 0x80
 
 struct ehca_cqe {
 	u64 work_request_id;
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index ea13efddf17..b6bcee03673 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -412,6 +412,7 @@ static struct ehca_qp *internal_create_qp(
 	struct ehca_shca *shca = container_of(pd->device, struct ehca_shca,
 					      ib_device);
 	struct ib_ucontext *context = NULL;
+	u32 nr_qes;
 	u64 h_ret;
 	int is_llqp = 0, has_srq = 0;
 	int qp_type, max_send_sge, max_recv_sge, ret;
@@ -715,6 +716,15 @@ static struct ehca_qp *internal_create_qp(
 				 "and pages ret=%i", ret);
 			goto create_qp_exit2;
 		}
+		nr_qes = my_qp->ipz_squeue.queue_length /
+			 my_qp->ipz_squeue.qe_size;
+		my_qp->sq_map = vmalloc(nr_qes *
+					sizeof(struct ehca_qmap_entry));
+		if (!my_qp->sq_map) {
+			ehca_err(pd->device, "Couldn't allocate squeue "
+				 "map ret=%i", ret);
+			goto create_qp_exit3;
+		}
 	}
 
 	if (HAS_RQ(my_qp)) {
@@ -724,7 +734,7 @@ static struct ehca_qp *internal_create_qp(
 		if (ret) {
 			ehca_err(pd->device, "Couldn't initialize rqueue "
 				 "and pages ret=%i", ret);
-			goto create_qp_exit3;
+			goto create_qp_exit4;
 		}
 	}
 
@@ -770,7 +780,7 @@ static struct ehca_qp *internal_create_qp(
 			if (!my_qp->mod_qp_parm) {
 				ehca_err(pd->device,
 					 "Could not alloc mod_qp_parm");
-				goto create_qp_exit4;
+				goto create_qp_exit5;
 			}
 		}
 	}
@@ -780,7 +790,7 @@ static struct ehca_qp *internal_create_qp(
 		h_ret = ehca_define_sqp(shca, my_qp, init_attr);
 		if (h_ret != H_SUCCESS) {
 			ret = ehca2ib_return_code(h_ret);
-			goto create_qp_exit5;
+			goto create_qp_exit6;
 		}
 	}
 
@@ -789,7 +799,7 @@ static struct ehca_qp *internal_create_qp(
 		if (ret) {
 			ehca_err(pd->device,
 				 "Couldn't assign qp to send_cq ret=%i", ret);
-			goto create_qp_exit5;
+			goto create_qp_exit6;
 		}
 	}
 
@@ -815,22 +825,26 @@ static struct ehca_qp *internal_create_qp(
 		if (ib_copy_to_udata(udata, &resp, sizeof resp)) {
 			ehca_err(pd->device, "Copy to udata failed");
 			ret = -EINVAL;
-			goto create_qp_exit6;
+			goto create_qp_exit7;
 		}
 	}
 
 	return my_qp;
 
-create_qp_exit6:
+create_qp_exit7:
 	ehca_cq_unassign_qp(my_qp->send_cq, my_qp->real_qp_num);
 
-create_qp_exit5:
+create_qp_exit6:
 	kfree(my_qp->mod_qp_parm);
 
-create_qp_exit4:
+create_qp_exit5:
 	if (HAS_RQ(my_qp))
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
 
+create_qp_exit4:
+	if (HAS_SQ(my_qp))
+		vfree(my_qp->sq_map);
+
 create_qp_exit3:
 	if (HAS_SQ(my_qp))
 		ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
@@ -1534,8 +1548,6 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 	if (attr_mask & IB_QP_QKEY)
 		my_qp->qkey = attr->qkey;
 
-	my_qp->state = qp_new_state;
-
 modify_qp_exit2:
 	if (squeue_locked) { /* this means: sqe -> rts */
 		spin_unlock_irqrestore(&my_qp->spinlock_s, flags);
@@ -1551,6 +1563,8 @@ modify_qp_exit1:
 int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
 		   struct ib_udata *udata)
 {
+	int ret = 0;
+
 	struct ehca_shca *shca = container_of(ibqp->device, struct ehca_shca,
 					      ib_device);
 	struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp);
@@ -1597,12 +1611,18 @@ int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
 				 attr->qp_state, my_qp->init_attr.port_num,
 				 ibqp->qp_type);
 			spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
-			return 0;
+			goto out;
 		}
 		spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
 	}
 
-	return internal_modify_qp(ibqp, attr, attr_mask, 0);
+	ret = internal_modify_qp(ibqp, attr, attr_mask, 0);
+
+out:
+	if ((ret == 0) && (attr_mask & IB_QP_STATE))
+		my_qp->state = attr->qp_state;
+
+	return ret;
 }
 
 void ehca_recover_sqp(struct ib_qp *sqp)
@@ -1973,8 +1993,10 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 
 	if (HAS_RQ(my_qp))
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
-	if (HAS_SQ(my_qp))
+	if (HAS_SQ(my_qp)) {
 		ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
+		vfree(my_qp->sq_map);
+	}
 	kmem_cache_free(qp_cache, my_qp);
 	atomic_dec(&shca->num_qps);
 	return 0;
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index dd9bc68f1c7..4426d82fe79 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -42,7 +42,7 @@
  */
 
 
-#include <asm-powerpc/system.h>
+#include <asm/system.h>
 #include "ehca_classes.h"
 #include "ehca_tools.h"
 #include "ehca_qes.h"
@@ -139,6 +139,7 @@ static void trace_send_wr_ud(const struct ib_send_wr *send_wr)
 static inline int ehca_write_swqe(struct ehca_qp *qp,
 				  struct ehca_wqe *wqe_p,
 				  const struct ib_send_wr *send_wr,
+				  u32 sq_map_idx,
 				  int hidden)
 {
 	u32 idx;
@@ -157,7 +158,11 @@ static inline int ehca_write_swqe(struct ehca_qp *qp,
 	/* clear wqe header until sglist */
 	memset(wqe_p, 0, offsetof(struct ehca_wqe, u.ud_av.sg_list));
 
-	wqe_p->work_request_id = send_wr->wr_id;
+	wqe_p->work_request_id = send_wr->wr_id & ~QMAP_IDX_MASK;
+	wqe_p->work_request_id |= sq_map_idx & QMAP_IDX_MASK;
+
+	qp->sq_map[sq_map_idx].app_wr_id = send_wr->wr_id & QMAP_IDX_MASK;
+	qp->sq_map[sq_map_idx].reported = 0;
 
 	switch (send_wr->opcode) {
 	case IB_WR_SEND:
@@ -381,6 +386,7 @@ static inline int post_one_send(struct ehca_qp *my_qp,
 {
 	struct ehca_wqe *wqe_p;
 	int ret;
+	u32 sq_map_idx;
 	u64 start_offset = my_qp->ipz_squeue.current_q_offset;
 
 	/* get pointer next to free WQE */
@@ -393,8 +399,15 @@ static inline int post_one_send(struct ehca_qp *my_qp,
 			 "qp_num=%x", my_qp->ib_qp.qp_num);
 		return -ENOMEM;
 	}
+
+	/*
+	 * Get the index of the WQE in the send queue. The same index is used
+	 * for writing into the sq_map.
+	 */
+	sq_map_idx = start_offset / my_qp->ipz_squeue.qe_size;
+
 	/* write a SEND WQE into the QUEUE */
-	ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, hidden);
+	ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, sq_map_idx, hidden);
 	/*
 	 * if something failed,
 	 * reset the free entry pointer to the start value
@@ -589,7 +602,7 @@ static inline int ehca_poll_cq_one(struct ib_cq *cq, struct ib_wc *wc)
 	struct ehca_qp *my_qp;
 	int cqe_count = 0, is_error;
 
-poll_cq_one_read_cqe:
+repoll:
 	cqe = (struct ehca_cqe *)
 		ipz_qeit_get_inc_valid(&my_cq->ipz_queue);
 	if (!cqe) {
@@ -617,7 +630,7 @@ poll_cq_one_read_cqe:
 			ehca_dmp(cqe, 64, "cq_num=%x qp_num=%x",
 				 my_cq->cq_number, cqe->local_qp_number);
 			/* ignore this purged cqe */
-			goto poll_cq_one_read_cqe;
+			goto repoll;
 		}
 		spin_lock_irqsave(&qp->spinlock_s, flags);
 		purgeflag = qp->sqerr_purgeflag;
@@ -636,7 +649,7 @@ poll_cq_one_read_cqe:
 			 * that caused sqe and turn off purge flag
 			 */
 			qp->sqerr_purgeflag = 0;
-			goto poll_cq_one_read_cqe;
+			goto repoll;
 		}
 	}
 
@@ -654,8 +667,34 @@ poll_cq_one_read_cqe:
 			 my_cq, my_cq->cq_number);
 	}
 
-	/* we got a completion! */
-	wc->wr_id = cqe->work_request_id;
+	read_lock(&ehca_qp_idr_lock);
+	my_qp = idr_find(&ehca_qp_idr, cqe->qp_token);
+	read_unlock(&ehca_qp_idr_lock);
+	if (!my_qp)
+		goto repoll;
+	wc->qp = &my_qp->ib_qp;
+
+	if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) {
+		struct ehca_qmap_entry *qmap_entry;
+		/*
+		 * We got a send completion and need to restore the original
+		 * wr_id.
+		 */
+		qmap_entry = &my_qp->sq_map[cqe->work_request_id &
+					    QMAP_IDX_MASK];
+
+		if (qmap_entry->reported) {
+			ehca_warn(cq->device, "Double cqe on qp_num=%#x",
+				  my_qp->real_qp_num);
+			/* found a double cqe, discard it and read next one */
+			goto repoll;
+		}
+		wc->wr_id = cqe->work_request_id & ~QMAP_IDX_MASK;
+		wc->wr_id |= qmap_entry->app_wr_id;
+		qmap_entry->reported = 1;
+	} else
+		/* We got a receive completion. */
+		wc->wr_id = cqe->work_request_id;
 
 	/* eval ib_wc_opcode */
 	wc->opcode = ib_wc_opcode[cqe->optype]-1;
@@ -667,7 +706,7 @@ poll_cq_one_read_cqe:
 		ehca_dmp(cqe, 64, "ehca_cq=%p cq_num=%x",
 			 my_cq, my_cq->cq_number);
 		/* update also queue adder to throw away this entry!!! */
-		goto poll_cq_one_exit0;
+		goto repoll;
 	}
 
 	/* eval ib_wc_status */
@@ -678,11 +717,6 @@ poll_cq_one_read_cqe:
 	} else
 		wc->status = IB_WC_SUCCESS;
 
-	read_lock(&ehca_qp_idr_lock);
-	my_qp = idr_find(&ehca_qp_idr, cqe->qp_token);
-	wc->qp = &my_qp->ib_qp;
-	read_unlock(&ehca_qp_idr_lock);
-
 	wc->byte_len = cqe->nr_bytes_transferred;
 	wc->pkey_index = cqe->pkey_index;
 	wc->slid = cqe->rlid;
diff --git a/drivers/infiniband/hw/ehca/ehca_tools.h b/drivers/infiniband/hw/ehca/ehca_tools.h
index ec950bf8c47..21f7d06f14a 100644
--- a/drivers/infiniband/hw/ehca/ehca_tools.h
+++ b/drivers/infiniband/hw/ehca/ehca_tools.h
@@ -54,7 +54,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
-#include <linux/version.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
 #include <linux/device.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index daad09a4591..ad0aab60b05 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -1259,7 +1259,7 @@ reloop:
 			 */
 			ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf"
 				  " %x, len %x hdrq+%x rhf: %Lx\n",
-				  etail, tlen, l,
+				  etail, tlen, l, (unsigned long long)
 				  le64_to_cpu(*(__le64 *) rhf_addr));
 			if (ipath_debug & __IPATH_ERRPKTDBG) {
 				u32 j, *d, dw = rsize-2;
@@ -1457,7 +1457,8 @@ static void ipath_reset_availshadow(struct ipath_devdata *dd)
 			0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */
 		if (oldval != dd->ipath_pioavailshadow[i])
 			ipath_dbg("shadow[%d] was %Lx, now %lx\n",
-				i, oldval, dd->ipath_pioavailshadow[i]);
+				i, (unsigned long long) oldval,
+				dd->ipath_pioavailshadow[i]);
 	}
 	spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
 }
diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index 23faba9d21e..8bb5170b4e4 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -31,7 +31,6 @@
  * SOFTWARE.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/mount.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
index fb70712ac85..9839e20119b 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
@@ -528,7 +528,7 @@ static const struct ipath_cregs ipath_7220_cregs = {
 
 static char int_type[16] = "auto";
 module_param_string(interrupt_type, int_type, sizeof(int_type), 0444);
-MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx\n");
+MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx");
 
 /* packet rate matching delay; chip has support */
 static u8 rate_to_delay[2][2] = {
@@ -1032,7 +1032,7 @@ static int ipath_7220_bringup_serdes(struct ipath_devdata *dd)
 	ipath_cdbg(VERBOSE, "done: xgxs=%llx from %llx\n",
 		   (unsigned long long)
 		   ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig),
-		   prev_val);
+		   (unsigned long long) prev_val);
 
 	guid = be64_to_cpu(dd->ipath_guid);
 
@@ -1042,7 +1042,8 @@ static int ipath_7220_bringup_serdes(struct ipath_devdata *dd)
 		ipath_dbg("No GUID for heartbeat, faking %llx\n",
 			(unsigned long long)guid);
 	} else
-		ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n", guid);
+		ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n",
+			(unsigned long long) guid);
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_hrtbt_guid, guid);
 	return ret;
 }
@@ -1719,7 +1720,7 @@ static void ipath_7220_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
 				 "not 2KB aligned!\n", pa);
 			return;
 		}
-		if (pa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
+		if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
 			ipath_dev_err(dd,
 				      "BUG: Physical page address 0x%lx "
 				      "larger than supported\n", pa);
@@ -2505,7 +2506,7 @@ done:
 	if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) {
 		ipath_dbg("Did not get to DDR INIT (%x) after %Lu msecs\n",
 			ipath_ib_state(dd, dd->ipath_lastibcstat),
-			jiffies_to_msecs(jiffies)-startms);
+			(unsigned long long) jiffies_to_msecs(jiffies)-startms);
 		dd->ipath_flags &= ~IPATH_IB_AUTONEG_INPROG;
 		if (dd->ipath_autoneg_tries == IPATH_AUTONEG_TRIES) {
 			dd->ipath_flags |= IPATH_IB_AUTONEG_FAILED;
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 26900b3b7a4..6c21b4b5ec7 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -356,9 +356,10 @@ static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
 			dd->ipath_cregs->cr_iblinkerrrecovcnt);
 		if (linkrecov != dd->ipath_lastlinkrecov) {
 			ipath_dbg("IB linkrecov up %Lx (%s %s) recov %Lu\n",
-				ibcs, ib_linkstate(dd, ibcs),
+				(unsigned long long) ibcs,
+				ib_linkstate(dd, ibcs),
 				ipath_ibcstatus_str[ltstate],
-				linkrecov);
+				(unsigned long long) linkrecov);
 			/* and no more until active again */
 			dd->ipath_lastlinkrecov = 0;
 			ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
@@ -1118,9 +1119,11 @@ irqreturn_t ipath_intr(int irq, void *data)
 	if (unlikely(istat & ~dd->ipath_i_bitsextant))
 		ipath_dev_err(dd,
 			      "interrupt with unknown interrupts %Lx set\n",
+			      (unsigned long long)
 			      istat & ~dd->ipath_i_bitsextant);
 	else if (istat & ~INFINIPATH_I_ERROR) /* errors do own printing */
-		ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n", istat);
+		ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n",
+			(unsigned long long) istat);
 
 	if (istat & INFINIPATH_I_ERROR) {
 		ipath_stats.sps_errints++;
@@ -1128,7 +1131,8 @@ irqreturn_t ipath_intr(int irq, void *data)
 					  dd->ipath_kregs->kr_errorstatus);
 		if (!estat)
 			dev_info(&dd->pcidev->dev, "error interrupt (%Lx), "
-				 "but no error bits set!\n", istat);
+				 "but no error bits set!\n",
+				 (unsigned long long) istat);
 		else if (estat == -1LL)
 			/*
 			 * should we try clearing all, or hope next read
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 36aa242c487..729446f56aa 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -267,6 +267,7 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 	u16 lrh0;
 	u16 lid;
 	int ret = 0;
+	int next_cur;
 
 	spin_lock_irqsave(&qp->s_lock, flags);
 
@@ -290,8 +291,9 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 		goto bail;
 
 	wqe = get_swqe_ptr(qp, qp->s_cur);
-	if (++qp->s_cur >= qp->s_size)
-		qp->s_cur = 0;
+	next_cur = qp->s_cur + 1;
+	if (next_cur >= qp->s_size)
+		next_cur = 0;
 
 	/* Construct the header. */
 	ah_attr = &to_iah(wqe->wr.wr.ud.ah)->attr;
@@ -315,6 +317,7 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 				qp->s_flags |= IPATH_S_WAIT_DMA;
 				goto bail;
 			}
+			qp->s_cur = next_cur;
 			spin_unlock_irqrestore(&qp->s_lock, flags);
 			ipath_ud_loopback(qp, wqe);
 			spin_lock_irqsave(&qp->s_lock, flags);
@@ -323,6 +326,7 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 		}
 	}
 
+	qp->s_cur = next_cur;
 	extra_bytes = -wqe->length & 3;
 	nwords = (wqe->length + extra_bytes) >> 2;
 
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index 55c71882882..b766e40e9eb 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -1021,7 +1021,7 @@ static void sdma_complete(void *cookie, int status)
 	struct ipath_verbs_txreq *tx = cookie;
 	struct ipath_qp *qp = tx->qp;
 	struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
-	unsigned int flags;
+	unsigned long flags;
 	enum ib_wc_status ibs = status == IPATH_SDMA_TXREQ_S_OK ?
 		IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR;
 
@@ -1051,7 +1051,7 @@ static void sdma_complete(void *cookie, int status)
 
 static void decrement_dma_busy(struct ipath_qp *qp)
 {
-	unsigned int flags;
+	unsigned long flags;
 
 	if (atomic_dec_and_test(&qp->s_dma_busy)) {
 		spin_lock_irqsave(&qp->s_lock, flags);
@@ -1221,7 +1221,7 @@ static int ipath_verbs_send_pio(struct ipath_qp *qp,
 	unsigned flush_wc;
 	u32 control;
 	int ret;
-	unsigned int flags;
+	unsigned long flags;
 
 	piobuf = ipath_getpiobuf(dd, plen, NULL);
 	if (unlikely(piobuf == NULL)) {
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index a1464574bfd..d0866a3636e 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -515,17 +515,17 @@ static void mlx4_ib_handle_error_cqe(struct mlx4_err_cqe *cqe,
 	wc->vendor_err = cqe->vendor_err_syndrome;
 }
 
-static int mlx4_ib_ipoib_csum_ok(__be32 status, __be16 checksum)
+static int mlx4_ib_ipoib_csum_ok(__be16 status, __be16 checksum)
 {
-	return ((status & cpu_to_be32(MLX4_CQE_IPOIB_STATUS_IPV4	|
-				      MLX4_CQE_IPOIB_STATUS_IPV4F	|
-				      MLX4_CQE_IPOIB_STATUS_IPV4OPT	|
-				      MLX4_CQE_IPOIB_STATUS_IPV6	|
-				      MLX4_CQE_IPOIB_STATUS_IPOK)) ==
-		cpu_to_be32(MLX4_CQE_IPOIB_STATUS_IPV4	|
-			    MLX4_CQE_IPOIB_STATUS_IPOK))		&&
-		(status & cpu_to_be32(MLX4_CQE_IPOIB_STATUS_UDP	|
-				      MLX4_CQE_IPOIB_STATUS_TCP))	&&
+	return ((status & cpu_to_be16(MLX4_CQE_STATUS_IPV4      |
+				      MLX4_CQE_STATUS_IPV4F     |
+				      MLX4_CQE_STATUS_IPV4OPT   |
+				      MLX4_CQE_STATUS_IPV6      |
+				      MLX4_CQE_STATUS_IPOK)) ==
+		cpu_to_be16(MLX4_CQE_STATUS_IPV4        |
+			    MLX4_CQE_STATUS_IPOK))              &&
+		(status & cpu_to_be16(MLX4_CQE_STATUS_UDP       |
+				      MLX4_CQE_STATUS_TCP))     &&
 		checksum == cpu_to_be16(0xffff);
 }
 
@@ -582,17 +582,17 @@ repoll:
 	}
 
 	if (!*cur_qp ||
-	    (be32_to_cpu(cqe->my_qpn) & 0xffffff) != (*cur_qp)->mqp.qpn) {
+	    (be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK) != (*cur_qp)->mqp.qpn) {
 		/*
 		 * We do not have to take the QP table lock here,
 		 * because CQs will be locked while QPs are removed
 		 * from the table.
 		 */
 		mqp = __mlx4_qp_lookup(to_mdev(cq->ibcq.device)->dev,
-				       be32_to_cpu(cqe->my_qpn));
+				       be32_to_cpu(cqe->vlan_my_qpn));
 		if (unlikely(!mqp)) {
 			printk(KERN_WARNING "CQ %06x with entry for unknown QPN %06x\n",
-			       cq->mcq.cqn, be32_to_cpu(cqe->my_qpn) & 0xffffff);
+			       cq->mcq.cqn, be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK);
 			return -EINVAL;
 		}
 
@@ -692,14 +692,13 @@ repoll:
 		}
 
 		wc->slid	   = be16_to_cpu(cqe->rlid);
-		wc->sl		   = cqe->sl >> 4;
+		wc->sl		   = be16_to_cpu(cqe->sl_vid >> 12);
 		g_mlpath_rqpn	   = be32_to_cpu(cqe->g_mlpath_rqpn);
 		wc->src_qp	   = g_mlpath_rqpn & 0xffffff;
 		wc->dlid_path_bits = (g_mlpath_rqpn >> 24) & 0x7f;
 		wc->wc_flags	  |= g_mlpath_rqpn & 0x80000000 ? IB_WC_GRH : 0;
 		wc->pkey_index     = be32_to_cpu(cqe->immed_rss_invalid) & 0x7f;
-		wc->csum_ok	   = mlx4_ib_ipoib_csum_ok(cqe->ipoib_status,
-							   cqe->checksum);
+		wc->csum_ok	   = mlx4_ib_ipoib_csum_ok(cqe->status, cqe->checksum);
 	}
 
 	return 0;
@@ -767,7 +766,7 @@ void __mlx4_ib_cq_clean(struct mlx4_ib_cq *cq, u32 qpn, struct mlx4_ib_srq *srq)
 	 */
 	while ((int) --prod_index - (int) cq->mcq.cons_index >= 0) {
 		cqe = get_cqe(cq, prod_index & cq->ibcq.cqe);
-		if ((be32_to_cpu(cqe->my_qpn) & 0xffffff) == qpn) {
+		if ((be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK) == qpn) {
 			if (srq && !(cqe->owner_sr_opcode & MLX4_CQE_IS_SEND_MASK))
 				mlx4_ib_free_srq_wqe(srq, be16_to_cpu(cqe->wqe_index));
 			++nfreed;
diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c
index a4cdb465cd1..87f5c5a87b9 100644
--- a/drivers/infiniband/hw/mlx4/mr.c
+++ b/drivers/infiniband/hw/mlx4/mr.c
@@ -204,6 +204,8 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd,
 	if (err)
 		goto err_mr;
 
+	mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key;
+
 	return &mr->ibmr;
 
 err_mr:
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index f7bc7dd8578..9559248f265 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -902,7 +902,7 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp,
 			context->mtu_msgmax = (IB_MTU_4096 << 5) |
 					      ilog2(dev->dev->caps.max_gso_sz);
 		else
-			context->mtu_msgmax = (IB_MTU_4096 << 5) | 11;
+			context->mtu_msgmax = (IB_MTU_4096 << 5) | 12;
 	} else if (attr_mask & IB_QP_PATH_MTU) {
 		if (attr->path_mtu < IB_MTU_256 || attr->path_mtu > IB_MTU_4096) {
 			printk(KERN_ERR "path MTU (%u) is invalid\n",
@@ -1342,6 +1342,12 @@ static __be32 convert_access(int acc)
 static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr)
 {
 	struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(wr->wr.fast_reg.page_list);
+	int i;
+
+	for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i)
+		wr->wr.fast_reg.page_list->page_list[i] =
+			cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] |
+				    MLX4_MTT_FLAG_PRESENT);
 
 	fseg->flags		= convert_access(wr->wr.fast_reg.access_flags);
 	fseg->mem_key		= cpu_to_be32(wr->wr.fast_reg.rkey);
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index 39bd897b40c..8eb7ae96974 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -43,7 +43,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <asm/io.h>
 #include <linux/crc32c.h>
 
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 9f0b964b2c9..499d3cf83e1 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -1956,13 +1956,6 @@ static int mini_cm_reject(struct nes_cm_core *cm_core,
 		return ret;
 	cleanup_retrans_entry(cm_node);
 	cm_node->state = NES_CM_STATE_CLOSED;
-	ret = send_fin(cm_node, NULL);
-
-	if (cm_node->accept_pend) {
-		BUG_ON(!cm_node->listener);
-		atomic_dec(&cm_node->listener->pend_accepts_cnt);
-		BUG_ON(atomic_read(&cm_node->listener->pend_accepts_cnt) < 0);
-	}
 
 	ret = send_reset(cm_node, NULL);
 	return ret;
@@ -2383,6 +2376,7 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 			atomic_inc(&cm_disconnects);
 			cm_event.event = IW_CM_EVENT_DISCONNECT;
 			if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET) {
+				issued_disconnect_reset = 1;
 				cm_event.status = IW_CM_EVENT_STATUS_RESET;
 				nes_debug(NES_DBG_CM, "Generating a CM "
 					"Disconnect Event (status reset) for "
@@ -2508,7 +2502,6 @@ static int nes_disconnect(struct nes_qp *nesqp, int abrupt)
 		nes_debug(NES_DBG_CM, "Call close API\n");
 
 		g_cm_core->api->close(g_cm_core, nesqp->cm_node);
-		nesqp->cm_node = NULL;
 	}
 
 	return ret;
@@ -2837,6 +2830,7 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	cm_node->apbvt_set = 1;
 	nesqp->cm_node = cm_node;
 	cm_node->nesqp = nesqp;
+	nes_add_ref(&nesqp->ibqp);
 
 	return 0;
 }
@@ -3167,7 +3161,6 @@ static void cm_event_connect_error(struct nes_cm_event *event)
 	if (ret)
 		printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
 			"ret=%d\n", __func__, __LINE__, ret);
-	nes_rem_ref(&nesqp->ibqp);
 	cm_id->rem_ref(cm_id);
 
 	rem_ref_cm_node(event->cm_node->cm_core, event->cm_node);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index b0ffc9abe8c..05eb41b8ab6 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -293,6 +293,7 @@ struct ipoib_dev_priv {
 
 	struct delayed_work pkey_poll_task;
 	struct delayed_work mcast_task;
+	struct work_struct carrier_on_task;
 	struct work_struct flush_light;
 	struct work_struct flush_normal;
 	struct work_struct flush_heavy;
@@ -464,6 +465,7 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port);
 void ipoib_dev_cleanup(struct net_device *dev);
 
 void ipoib_mcast_join_task(struct work_struct *work);
+void ipoib_mcast_carrier_on_task(struct work_struct *work);
 void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb);
 
 void ipoib_mcast_restart_task(struct work_struct *work);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 0f2d3045061..341ffedafed 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -202,7 +202,7 @@ static void ipoib_cm_free_rx_ring(struct net_device *dev,
 			dev_kfree_skb_any(rx_ring[i].skb);
 		}
 
-	kfree(rx_ring);
+	vfree(rx_ring);
 }
 
 static void ipoib_cm_start_rx_drain(struct ipoib_dev_priv *priv)
@@ -337,7 +337,7 @@ static void ipoib_cm_init_rx_wr(struct net_device *dev,
 		sge[i].length = PAGE_SIZE;
 
 	wr->next    = NULL;
-	wr->sg_list = priv->cm.rx_sge;
+	wr->sg_list = sge;
 	wr->num_sge = priv->cm.num_frags;
 }
 
@@ -352,9 +352,14 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i
 	int ret;
 	int i;
 
-	rx->rx_ring = kcalloc(ipoib_recvq_size, sizeof *rx->rx_ring, GFP_KERNEL);
-	if (!rx->rx_ring)
+	rx->rx_ring = vmalloc(ipoib_recvq_size * sizeof *rx->rx_ring);
+	if (!rx->rx_ring) {
+		printk(KERN_WARNING "%s: failed to allocate CM non-SRQ ring (%d entries)\n",
+		       priv->ca->name, ipoib_recvq_size);
 		return -ENOMEM;
+	}
+
+	memset(rx->rx_ring, 0, ipoib_recvq_size * sizeof *rx->rx_ring);
 
 	t = kmalloc(sizeof *t, GFP_KERNEL);
 	if (!t) {
@@ -1494,14 +1499,16 @@ static void ipoib_cm_create_srq(struct net_device *dev, int max_sge)
 		return;
 	}
 
-	priv->cm.srq_ring = kzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring,
-				    GFP_KERNEL);
+	priv->cm.srq_ring = vmalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring);
 	if (!priv->cm.srq_ring) {
 		printk(KERN_WARNING "%s: failed to allocate CM SRQ ring (%d entries)\n",
 		       priv->ca->name, ipoib_recvq_size);
 		ib_destroy_srq(priv->cm.srq);
 		priv->cm.srq = NULL;
+		return;
 	}
+
+	memset(priv->cm.srq_ring, 0, ipoib_recvq_size * sizeof *priv->cm.srq_ring);
 }
 
 int ipoib_cm_dev_init(struct net_device *dev)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index f51201b17bf..1b1df5cc411 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -156,14 +156,8 @@ static int ipoib_stop(struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	/*
-	 * Now flush workqueue to make sure a scheduled task doesn't
-	 * bring our internal state back up.
-	 */
-	flush_workqueue(ipoib_workqueue);
-
-	ipoib_ib_dev_down(dev, 1);
-	ipoib_ib_dev_stop(dev, 1);
+	ipoib_ib_dev_down(dev, 0);
+	ipoib_ib_dev_stop(dev, 0);
 
 	if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
 		struct ipoib_dev_priv *cpriv;
@@ -1081,6 +1075,7 @@ static void ipoib_setup(struct net_device *dev)
 
 	INIT_DELAYED_WORK(&priv->pkey_poll_task, ipoib_pkey_poll);
 	INIT_DELAYED_WORK(&priv->mcast_task,   ipoib_mcast_join_task);
+	INIT_WORK(&priv->carrier_on_task, ipoib_mcast_carrier_on_task);
 	INIT_WORK(&priv->flush_light,   ipoib_ib_dev_flush_light);
 	INIT_WORK(&priv->flush_normal,   ipoib_ib_dev_flush_normal);
 	INIT_WORK(&priv->flush_heavy,   ipoib_ib_dev_flush_heavy);
@@ -1314,7 +1309,7 @@ sysfs_failed:
 
 register_failed:
 	ib_unregister_event_handler(&priv->event_handler);
-	flush_scheduled_work();
+	flush_workqueue(ipoib_workqueue);
 
 event_failed:
 	ipoib_dev_cleanup(priv->dev);
@@ -1373,7 +1368,12 @@ static void ipoib_remove_one(struct ib_device *device)
 
 	list_for_each_entry_safe(priv, tmp, dev_list, list) {
 		ib_unregister_event_handler(&priv->event_handler);
-		flush_scheduled_work();
+
+		rtnl_lock();
+		dev_change_flags(priv->dev, priv->dev->flags & ~IFF_UP);
+		rtnl_unlock();
+
+		flush_workqueue(ipoib_workqueue);
 
 		unregister_netdev(priv->dev);
 		ipoib_dev_cleanup(priv->dev);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 8950e9546f4..aae28620a6e 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -366,6 +366,21 @@ static int ipoib_mcast_sendonly_join(struct ipoib_mcast *mcast)
 	return ret;
 }
 
+void ipoib_mcast_carrier_on_task(struct work_struct *work)
+{
+	struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv,
+						   carrier_on_task);
+
+	/*
+	 * Take rtnl_lock to avoid racing with ipoib_stop() and
+	 * turning the carrier back on while a device is being
+	 * removed.
+	 */
+	rtnl_lock();
+	netif_carrier_on(priv->dev);
+	rtnl_unlock();
+}
+
 static int ipoib_mcast_join_complete(int status,
 				     struct ib_sa_multicast *multicast)
 {
@@ -392,8 +407,12 @@ static int ipoib_mcast_join_complete(int status,
 					   &priv->mcast_task, 0);
 		mutex_unlock(&mcast_mutex);
 
+		/*
+		 * Defer carrier on work to ipoib_workqueue to avoid a
+		 * deadlock on rtnl_lock here.
+		 */
 		if (mcast == priv->broadcast)
-			netif_carrier_on(dev);
+			queue_work(ipoib_workqueue, &priv->carrier_on_task);
 
 		return 0;
 	}
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index 63462ecca14..26ff6214a81 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -33,7 +33,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 
 #include "iscsi_iser.h"
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 2d65411f676..3524bef62be 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -647,6 +647,47 @@ static int str_to_user(const char *str, unsigned int maxlen, void __user *p)
 	return copy_to_user(p, str, len) ? -EFAULT : len;
 }
 
+#define OLD_KEY_MAX	0x1ff
+static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user *p, int compat_mode)
+{
+	static unsigned long keymax_warn_time;
+	unsigned long *bits;
+	int len;
+
+	switch (_IOC_NR(cmd) & EV_MAX) {
+
+	case      0: bits = dev->evbit;  len = EV_MAX;  break;
+	case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
+	case EV_REL: bits = dev->relbit; len = REL_MAX; break;
+	case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
+	case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
+	case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
+	case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
+	case EV_FF:  bits = dev->ffbit;  len = FF_MAX;  break;
+	case EV_SW:  bits = dev->swbit;  len = SW_MAX;  break;
+	default: return -EINVAL;
+	}
+
+	/*
+	 * Work around bugs in userspace programs that like to do
+	 * EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len'
+	 * should be in bytes, not in bits.
+	 */
+	if ((_IOC_NR(cmd) & EV_MAX) == EV_KEY && _IOC_SIZE(cmd) == OLD_KEY_MAX) {
+		len = OLD_KEY_MAX;
+		if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
+			printk(KERN_WARNING
+				"evdev.c(EVIOCGBIT): Suspicious buffer size %u, "
+				"limiting output to %zu bytes. See "
+				"http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
+				OLD_KEY_MAX,
+				BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
+	}
+
+	return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
+}
+#undef OLD_KEY_MAX
+
 static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 			   void __user *p, int compat_mode)
 {
@@ -733,26 +774,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 
 		if (_IOC_DIR(cmd) == _IOC_READ) {
 
-			if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0))) {
-
-				unsigned long *bits;
-				int len;
-
-				switch (_IOC_NR(cmd) & EV_MAX) {
-
-				case      0: bits = dev->evbit;  len = EV_MAX;  break;
-				case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
-				case EV_REL: bits = dev->relbit; len = REL_MAX; break;
-				case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
-				case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
-				case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
-				case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
-				case EV_FF:  bits = dev->ffbit;  len = FF_MAX;  break;
-				case EV_SW:  bits = dev->swbit;  len = SW_MAX;  break;
-				default: return -EINVAL;
-				}
-				return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
-			}
+			if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0)))
+				return handle_eviocgbit(dev, cmd, p, compat_mode);
 
 			if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0)))
 				return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd),
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 87d3e7eabff..6791be81eb2 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -127,6 +127,7 @@ static const struct xpad_device {
 	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
diff --git a/drivers/input/keyboard/aaed2000_kbd.c b/drivers/input/keyboard/aaed2000_kbd.c
index 8a77bfcd05b..18222a689a0 100644
--- a/drivers/input/keyboard/aaed2000_kbd.c
+++ b/drivers/input/keyboard/aaed2000_kbd.c
@@ -20,8 +20,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/aaed2000.h>
+#include <mach/hardware.h>
+#include <mach/aaed2000.h>
 
 #define KB_ROWS			12
 #define KB_COLS			8
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index 54ed8e2e1c0..e348cfccc17 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -29,7 +29,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 
 #include <linux/init.h>
 #include <linux/fs.h>
@@ -44,7 +43,7 @@
 #include <linux/input.h>
 
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 
 #define DRV_NAME	"bf54x-keys"
 #define TIME_SCALE	100	/* 100 ns */
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 1aa46ae1263..134e67bf6a9 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -20,10 +20,10 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include <asm/hardware/scoop.h>
 
 #define KB_ROWS				8
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index be58730e636..ec96b369dd7 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 
 #include <linux/init.h>
 #include <linux/fs.h>
@@ -118,6 +117,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 		unsigned int type = button->type ?: EV_KEY;
 
 		bdata->input = input;
+		bdata->button = button;
 		setup_timer(&bdata->timer,
 			    gpio_check_button, (unsigned long)bdata);
 
@@ -256,7 +256,7 @@ static int gpio_keys_resume(struct platform_device *pdev)
 #define gpio_keys_resume	NULL
 #endif
 
-struct platform_driver gpio_keys_device_driver = {
+static struct platform_driver gpio_keys_device_driver = {
 	.probe		= gpio_keys_probe,
 	.remove		= __devexit_p(gpio_keys_remove),
 	.suspend	= gpio_keys_suspend,
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index ce650af6d64..4e016d82306 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -24,8 +24,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/jornada720.h>
-#include <asm/hardware.h>
+#include <mach/jornada720.h>
+#include <mach/hardware.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c
index 2b404284c28..22f17a593be 100644
--- a/drivers/input/keyboard/maple_keyb.c
+++ b/drivers/input/keyboard/maple_keyb.c
@@ -2,7 +2,7 @@
  * SEGA Dreamcast keyboard driver
  * Based on drivers/usb/usbkbd.c
  * Copyright YAEGASHI Takeshi, 2001
- * Porting to 2.6 Copyright Adrian McMenamin, 2007
+ * Porting to 2.6 Copyright Adrian McMenamin, 2007, 2008
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -27,7 +27,6 @@
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/maple.h>
-#include <asm/mach/maple.h>
 
 /* Very simple mutex to ensure proper cleanup */
 static DEFINE_MUTEX(maple_keyb_mutex);
@@ -46,39 +45,51 @@ struct dc_kbd {
 };
 
 static const unsigned short dc_kbd_keycode[NR_SCANCODES] = {
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, KEY_B, KEY_C, KEY_D,
-	KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
-	KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
-	KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_1, KEY_2,
-	KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_0,
-	KEY_ENTER, KEY_ESC, KEY_BACKSPACE, KEY_TAB, KEY_SPACE, KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE,
-	KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_BACKSLASH, KEY_SEMICOLON, KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA,
-	KEY_DOT, KEY_SLASH, KEY_CAPSLOCK, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, KEY_B,
+	KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
+	KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
+	KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
+	KEY_7, KEY_8, KEY_9, KEY_0, KEY_ENTER, KEY_ESC, KEY_BACKSPACE,
+	KEY_TAB, KEY_SPACE, KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE,
+	KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_BACKSLASH, KEY_SEMICOLON,
+	KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, KEY_DOT, KEY_SLASH,
+	KEY_CAPSLOCK, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6,
 	KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, KEY_SYSRQ,
-	KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, KEY_PAGEUP, KEY_DELETE,
-	KEY_END, KEY_PAGEDOWN, KEY_RIGHT, KEY_LEFT, KEY_DOWN, KEY_UP,
-	KEY_NUMLOCK, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS, KEY_KPPLUS, KEY_KPENTER, KEY_KP1, KEY_KP2,
-	KEY_KP3, KEY_KP4, KEY_KP5, KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT,
-	KEY_102ND, KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, KEY_F14, KEY_F15,
-	KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F20,
-	KEY_F21, KEY_F22, KEY_F23, KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT,
-	KEY_STOP, KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, KEY_PASTE, KEY_FIND, KEY_MUTE,
-	KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPCOMMA, KEY_RESERVED, KEY_RO, KEY_KATAKANAHIRAGANA , KEY_YEN,
-	KEY_HENKAN, KEY_MUHENKAN, KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_HANGEUL, KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA, KEY_ZENKAKUHANKAKU, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-	KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT, KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, KEY_RIGHTALT, KEY_RIGHTMETA,
-	KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG, KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE,
-	KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, KEY_SCROLLUP, KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP,
-	KEY_SCREENLOCK, KEY_REFRESH, KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED
+	KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, KEY_PAGEUP,
+	KEY_DELETE, KEY_END, KEY_PAGEDOWN, KEY_RIGHT, KEY_LEFT, KEY_DOWN,
+	KEY_UP, KEY_NUMLOCK, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS,
+	KEY_KPPLUS, KEY_KPENTER, KEY_KP1, KEY_KP2, KEY_KP3, KEY_KP4, KEY_KP5,
+	KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, KEY_102ND,
+	KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, KEY_F14, KEY_F15,
+	KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22,
+	KEY_F23, KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, KEY_STOP,
+	KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, KEY_PASTE, KEY_FIND, KEY_MUTE,
+	KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_KPCOMMA, KEY_RESERVED, KEY_RO, KEY_KATAKANAHIRAGANA , KEY_YEN,
+	KEY_HENKAN, KEY_MUHENKAN, KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_HANGEUL, KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA,
+	KEY_ZENKAKUHANKAKU, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT,
+	KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, KEY_RIGHTALT,
+	KEY_RIGHTMETA, KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG,
+	KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE,
+	KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, KEY_SCROLLUP,
+	KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, KEY_SCREENLOCK, KEY_REFRESH,
+	KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED
 };
 
 static void dc_scan_kbd(struct dc_kbd *kbd)
@@ -128,12 +139,12 @@ static void dc_scan_kbd(struct dc_kbd *kbd)
 static void dc_kbd_callback(struct mapleq *mq)
 {
 	struct maple_device *mapledev = mq->dev;
-	struct dc_kbd *kbd = mapledev->private_data;
+	struct dc_kbd *kbd = maple_get_drvdata(mapledev);
 	unsigned long *buf = mq->recvbuf;
 
 	/*
-	 * We should always be getting the lock because the only
-	 * time it may be locked if driver is in cleanup phase.
+	 * We should always get the lock because the only
+	 * time it may be locked is if the driver is in the cleanup phase.
 	 */
 	if (likely(mutex_trylock(&maple_keyb_mutex))) {
 
@@ -146,106 +157,96 @@ static void dc_kbd_callback(struct mapleq *mq)
 	}
 }
 
-static int dc_kbd_connect(struct maple_device *mdev)
+static int probe_maple_kbd(struct device *dev)
 {
+	struct maple_device *mdev = to_maple_dev(dev);
+	struct maple_driver *mdrv = to_maple_driver(dev->driver);
 	int i, error;
 	struct dc_kbd *kbd;
-	struct input_dev *dev;
+	struct input_dev *idev;
 
 	if (!(mdev->function & MAPLE_FUNC_KEYBOARD))
 		return -EINVAL;
 
 	kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL);
-	dev = input_allocate_device();
-	if (!kbd || !dev) {
+	idev = input_allocate_device();
+	if (!kbd || !idev) {
 		error = -ENOMEM;
 		goto fail;
 	}
 
-	mdev->private_data = kbd;
-
-	kbd->dev = dev;
+	kbd->dev = idev;
 	memcpy(kbd->keycode, dc_kbd_keycode, sizeof(kbd->keycode));
 
-	dev->name = mdev->product_name;
-	dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
-	dev->keycode = kbd->keycode;
-	dev->keycodesize = sizeof (unsigned short);
-	dev->keycodemax = ARRAY_SIZE(kbd->keycode);
-	dev->id.bustype = BUS_HOST;
-	dev->dev.parent = &mdev->dev;
+	idev->name = mdev->product_name;
+	idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+	idev->keycode = kbd->keycode;
+	idev->keycodesize = sizeof(unsigned short);
+	idev->keycodemax = ARRAY_SIZE(kbd->keycode);
+	idev->id.bustype = BUS_HOST;
+	idev->dev.parent = &mdev->dev;
 
 	for (i = 0; i < NR_SCANCODES; i++)
-		__set_bit(dc_kbd_keycode[i], dev->keybit);
-	__clear_bit(KEY_RESERVED, dev->keybit);
+		__set_bit(dc_kbd_keycode[i], idev->keybit);
+	__clear_bit(KEY_RESERVED, idev->keybit);
 
-	input_set_capability(dev, EV_MSC, MSC_SCAN);
-	input_set_drvdata(dev, kbd);
+	input_set_capability(idev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(idev, kbd);
 
-	error = input_register_device(dev);
+	error = input_register_device(idev);
 	if (error)
 		goto fail;
 
 	/* Maple polling is locked to VBLANK - which may be just 50/s */
-	maple_getcond_callback(mdev, dc_kbd_callback, HZ/50, MAPLE_FUNC_KEYBOARD);
-	return 0;
+	maple_getcond_callback(mdev, dc_kbd_callback, HZ/50,
+		MAPLE_FUNC_KEYBOARD);
 
- fail:
-	input_free_device(dev);
+	mdev->driver = mdrv;
+
+	maple_set_drvdata(mdev, kbd);
+
+	return error;
+
+fail:
+	input_free_device(idev);
 	kfree(kbd);
-	mdev->private_data = NULL;
+	maple_set_drvdata(mdev, NULL);
 	return error;
 }
 
-static void dc_kbd_disconnect(struct maple_device *mdev)
+static int remove_maple_kbd(struct device *dev)
 {
-	struct dc_kbd *kbd;
+	struct maple_device *mdev = to_maple_dev(dev);
+	struct dc_kbd *kbd = maple_get_drvdata(mdev);
 
 	mutex_lock(&maple_keyb_mutex);
 
-	kbd = mdev->private_data;
-	mdev->private_data = NULL;
 	input_unregister_device(kbd->dev);
 	kfree(kbd);
 
-	mutex_unlock(&maple_keyb_mutex);
-}
-
-/* allow the keyboard to be used */
-static int probe_maple_kbd(struct device *dev)
-{
-	struct maple_device *mdev = to_maple_dev(dev);
-	struct maple_driver *mdrv = to_maple_driver(dev->driver);
-	int error;
-
-	error = dc_kbd_connect(mdev);
-	if (error)
-		return error;
-
-	mdev->driver = mdrv;
-	mdev->registered = 1;
+	maple_set_drvdata(mdev, NULL);
 
+	mutex_unlock(&maple_keyb_mutex);
 	return 0;
 }
 
 static struct maple_driver dc_kbd_driver = {
 	.function = MAPLE_FUNC_KEYBOARD,
-	.connect = dc_kbd_connect,
-	.disconnect = dc_kbd_disconnect,
 	.drv = {
 		.name = "Dreamcast_keyboard",
 		.probe = probe_maple_kbd,
-       },
+		.remove = remove_maple_kbd,
+	},
 };
 
 static int __init dc_kbd_init(void)
 {
-	return maple_driver_register(&dc_kbd_driver.drv);
+	return maple_driver_register(&dc_kbd_driver);
 }
 
 static void __exit dc_kbd_exit(void)
 {
-	driver_unregister(&dc_kbd_driver.drv);
+	maple_driver_unregister(&dc_kbd_driver);
 }
 
 module_init(dc_kbd_init);
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 10afd206806..dcea87a0bc5 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -34,14 +34,13 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/errno.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
+#include <mach/keypad.h>
+#include <mach/menelaus.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #undef NEW_BOARD_LEARNING_MODE
 
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 6f1516f5075..6d30c6d334c 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -26,12 +26,11 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/hardware.h>
+#include <mach/pxa27x_keypad.h>
 
 /*
  * Keypad Controller registers
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 1aa37181c40..de67b8e0a79 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -20,10 +20,10 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include <asm/arch/spitz.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/spitz.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #define KB_ROWS			7
 #define KB_COLS			11
diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
index b12b7ee4b6a..44cb50af3ce 100644
--- a/drivers/input/keyboard/tosakbd.c
+++ b/drivers/input/keyboard/tosakbd.c
@@ -19,8 +19,8 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/tosa.h>
+#include <mach/gpio.h>
+#include <mach/tosa.h>
 
 #define KB_ROWMASK(r)		(1 << (r))
 #define SCANCODE(r, c)		(((r)<<4) + (c) + 1)
diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index 6a1f48b76e3..2adf9cb265d 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -148,6 +148,9 @@ static int __devexit cobalt_buttons_remove(struct platform_device *pdev)
 	return 0;
 }
 
+MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_DESCRIPTION("Cobalt button interface driver");
+MODULE_LICENSE("GPL");
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:Cobalt buttons");
 
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 798d84c44d0..9946d73624b 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -20,7 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
 MODULE_DESCRIPTION("ixp4xx beeper driver");
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 7bbea097cda..f996546fc44 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -130,6 +130,29 @@ config MOUSE_APPLETOUCH
 	  To compile this driver as a module, choose M here: the
 	  module will be called appletouch.
 
+config MOUSE_BCM5974
+	tristate "Apple USB BCM5974 Multitouch trackpad support"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you have an Apple USB BCM5974 Multitouch
+	  trackpad.
+
+	  The BCM5974 is the multitouch trackpad found in the Macbook
+	  Air (JAN2008) and Macbook Pro Penryn (FEB2008) laptops.
+
+	  It is also found in the IPhone (2007) and Ipod Touch (2008).
+
+	  This driver provides multitouch functionality together with
+	  the synaptics X11 driver.
+
+	  The interface is currently identical to the appletouch interface,
+	  for further information, see
+	  <file:Documentation/input/appletouch.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm5974.
+
 config MOUSE_INPORT
 	tristate "InPort/MS/ATIXL busmouse"
 	depends on ISA
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 9e6e3633082..d4d20251609 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -6,6 +6,7 @@
 
 obj-$(CONFIG_MOUSE_AMIGA)	+= amimouse.o
 obj-$(CONFIG_MOUSE_APPLETOUCH)	+= appletouch.o
+obj-$(CONFIG_MOUSE_BCM5974)	+= bcm5974.o
 obj-$(CONFIG_MOUSE_ATARI)	+= atarimouse.o
 obj-$(CONFIG_MOUSE_RISCPC)	+= rpcmouse.o
 obj-$(CONFIG_MOUSE_INPORT)	+= inport.o
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
new file mode 100644
index 00000000000..18f4d7f6ce6
--- /dev/null
+++ b/drivers/input/mouse/bcm5974.c
@@ -0,0 +1,721 @@
+/*
+ * Apple USB BCM5974 (Macbook Air and Penryn Macbook Pro) multitouch driver
+ *
+ * Copyright (C) 2008	   Henrik Rydberg (rydberg@euromail.se)
+ *
+ * The USB initialization and package decoding was made by
+ * Scott Shawcroft as part of the touchd user-space driver project:
+ * Copyright (C) 2008	   Scott Shawcroft (scott.shawcroft@gmail.com)
+ *
+ * The BCM5974 driver is based on the appletouch driver:
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2005      Johannes Berg (johannes@sipsolutions.net)
+ * Copyright (C) 2005	   Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2005	   Frank Arnold (frank@scirocco-5v-turbo.de)
+ * Copyright (C) 2005	   Peter Osterlund (petero2@telia.com)
+ * Copyright (C) 2005	   Michael Hanselmann (linux-kernel@hansmi.ch)
+ * Copyright (C) 2006	   Nicolas Boichat (nicolas@boichat.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/hid.h>
+#include <linux/mutex.h>
+
+#define USB_VENDOR_ID_APPLE		0x05ac
+
+/* MacbookAir, aka wellspring */
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ANSI	0x0223
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ISO	0x0224
+#define USB_DEVICE_ID_APPLE_WELLSPRING_JIS	0x0225
+/* MacbookProPenryn, aka wellspring2 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI	0x0230
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO	0x0231
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS	0x0232
+
+#define BCM5974_DEVICE(prod) {					\
+	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
+			USB_DEVICE_ID_MATCH_INT_CLASS |		\
+			USB_DEVICE_ID_MATCH_INT_PROTOCOL),	\
+	.idVendor = USB_VENDOR_ID_APPLE,			\
+	.idProduct = (prod),					\
+	.bInterfaceClass = USB_INTERFACE_CLASS_HID,		\
+	.bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE	\
+}
+
+/* table of devices that work with this driver */
+static const struct usb_device_id bcm5974_table[] = {
+	/* MacbookAir1.1 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_JIS),
+	/* MacbookProPenryn */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+	/* Terminating entry */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, bcm5974_table);
+
+MODULE_AUTHOR("Henrik Rydberg");
+MODULE_DESCRIPTION("Apple USB BCM5974 multitouch driver");
+MODULE_LICENSE("GPL");
+
+#define dprintk(level, format, a...)\
+	{ if (debug >= level) printk(KERN_DEBUG format, ##a); }
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activate debugging output");
+
+/* button data structure */
+struct bt_data {
+	u8 unknown1;		/* constant */
+	u8 button;		/* left button */
+	u8 rel_x;		/* relative x coordinate */
+	u8 rel_y;		/* relative y coordinate */
+};
+
+/* trackpad header structure */
+struct tp_header {
+	u8 unknown1[16];	/* constants, timers, etc */
+	u8 fingers;		/* number of fingers on trackpad */
+	u8 unknown2[9];		/* constants, timers, etc */
+};
+
+/* trackpad finger structure */
+struct tp_finger {
+	__le16 origin;		/* zero when switching track finger */
+	__le16 abs_x;		/* absolute x coodinate */
+	__le16 abs_y;		/* absolute y coodinate */
+	__le16 rel_x;		/* relative x coodinate */
+	__le16 rel_y;		/* relative y coodinate */
+	__le16 size_major;	/* finger size, major axis? */
+	__le16 size_minor;	/* finger size, minor axis? */
+	__le16 orientation;	/* 16384 when point, else 15 bit angle */
+	__le16 force_major;	/* trackpad force, major axis? */
+	__le16 force_minor;	/* trackpad force, minor axis? */
+	__le16 unused[3];	/* zeros */
+	__le16 multi;		/* one finger: varies, more fingers: constant */
+};
+
+/* trackpad data structure, empirically at least ten fingers */
+struct tp_data {
+	struct tp_header header;
+	struct tp_finger finger[16];
+};
+
+/* device-specific parameters */
+struct bcm5974_param {
+	int dim;		/* logical dimension */
+	int fuzz;		/* logical noise value */
+	int devmin;		/* device minimum reading */
+	int devmax;		/* device maximum reading */
+};
+
+/* device-specific configuration */
+struct bcm5974_config {
+	int ansi, iso, jis;	/* the product id of this device */
+	int bt_ep;		/* the endpoint of the button interface */
+	int bt_datalen;		/* data length of the button interface */
+	int tp_ep;		/* the endpoint of the trackpad interface */
+	int tp_datalen;		/* data length of the trackpad interface */
+	struct bcm5974_param p;	/* finger pressure limits */
+	struct bcm5974_param w;	/* finger width limits */
+	struct bcm5974_param x;	/* horizontal limits */
+	struct bcm5974_param y;	/* vertical limits */
+};
+
+/* logical device structure */
+struct bcm5974 {
+	char phys[64];
+	struct usb_device *udev;	/* usb device */
+	struct usb_interface *intf;	/* our interface */
+	struct input_dev *input;	/* input dev */
+	struct bcm5974_config cfg;	/* device configuration */
+	struct mutex pm_mutex;		/* serialize access to open/suspend */
+	int opened;			/* 1: opened, 0: closed */
+	struct urb *bt_urb;		/* button usb request block */
+	struct bt_data *bt_data;	/* button transferred data */
+	struct urb *tp_urb;		/* trackpad usb request block */
+	struct tp_data *tp_data;	/* trackpad transferred data */
+	int fingers;			/* number of fingers on trackpad */
+};
+
+/* logical dimensions */
+#define DIM_PRESSURE	256		/* maximum finger pressure */
+#define DIM_WIDTH	16		/* maximum finger width */
+#define DIM_X		1280		/* maximum trackpad x value */
+#define DIM_Y		800		/* maximum trackpad y value */
+
+/* logical signal quality */
+#define SN_PRESSURE	45		/* pressure signal-to-noise ratio */
+#define SN_WIDTH	100		/* width signal-to-noise ratio */
+#define SN_COORD	250		/* coordinate signal-to-noise ratio */
+
+/* pressure thresholds */
+#define PRESSURE_LOW	(2 * DIM_PRESSURE / SN_PRESSURE)
+#define PRESSURE_HIGH	(3 * PRESSURE_LOW)
+
+/* device constants */
+static const struct bcm5974_config bcm5974_config_table[] = {
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+		0x84, sizeof(struct bt_data),
+		0x81, sizeof(struct tp_data),
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4824, 5342 },
+		{ DIM_Y, DIM_Y / SN_COORD, -172, 5820 }
+	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+		0x84, sizeof(struct bt_data),
+		0x81, sizeof(struct tp_data),
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4824, 4824 },
+		{ DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
+	},
+	{}
+};
+
+/* return the device-specific configuration by device */
+static const struct bcm5974_config *bcm5974_get_config(struct usb_device *udev)
+{
+	u16 id = le16_to_cpu(udev->descriptor.idProduct);
+	const struct bcm5974_config *cfg;
+
+	for (cfg = bcm5974_config_table; cfg->ansi; ++cfg)
+		if (cfg->ansi == id || cfg->iso == id || cfg->jis == id)
+			return cfg;
+
+	return bcm5974_config_table;
+}
+
+/* convert 16-bit little endian to signed integer */
+static inline int raw2int(__le16 x)
+{
+	return (signed short)le16_to_cpu(x);
+}
+
+/* scale device data to logical dimensions (asserts devmin < devmax) */
+static inline int int2scale(const struct bcm5974_param *p, int x)
+{
+	return x * p->dim / (p->devmax - p->devmin);
+}
+
+/* all logical value ranges are [0,dim). */
+static inline int int2bound(const struct bcm5974_param *p, int x)
+{
+	int s = int2scale(p, x);
+
+	return clamp_val(s, 0, p->dim - 1);
+}
+
+/* setup which logical events to report */
+static void setup_events_to_report(struct input_dev *input_dev,
+				   const struct bcm5974_config *cfg)
+{
+	__set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_PRESSURE,
+				0, cfg->p.dim, cfg->p.fuzz, 0);
+	input_set_abs_params(input_dev, ABS_TOOL_WIDTH,
+				0, cfg->w.dim, cfg->w.fuzz, 0);
+	input_set_abs_params(input_dev, ABS_X,
+				0, cfg->x.dim, cfg->x.fuzz, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+				0, cfg->y.dim, cfg->y.fuzz, 0);
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+	__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+	__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+	__set_bit(BTN_LEFT, input_dev->keybit);
+}
+
+/* report button data as logical button state */
+static int report_bt_state(struct bcm5974 *dev, int size)
+{
+	if (size != sizeof(struct bt_data))
+		return -EIO;
+
+	input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
+	input_sync(dev->input);
+
+	return 0;
+}
+
+/* report trackpad data as logical trackpad state */
+static int report_tp_state(struct bcm5974 *dev, int size)
+{
+	const struct bcm5974_config *c = &dev->cfg;
+	const struct tp_finger *f = dev->tp_data->finger;
+	struct input_dev *input = dev->input;
+	const int fingers = (size - 26) / 28;
+	int raw_p, raw_w, raw_x, raw_y;
+	int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+	int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
+
+	if (size < 26 || (size - 26) % 28 != 0)
+		return -EIO;
+
+	/* always track the first finger; when detached, start over */
+	if (fingers) {
+		raw_p = raw2int(f->force_major);
+		raw_w = raw2int(f->size_major);
+		raw_x = raw2int(f->abs_x);
+		raw_y = raw2int(f->abs_y);
+
+		dprintk(9,
+			"bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
+			raw_p, raw_w, raw_x, raw_y);
+
+		ptest = int2bound(&c->p, raw_p);
+		origin = raw2int(f->origin);
+	}
+
+	/* while tracking finger still valid, count all fingers */
+	if (ptest > PRESSURE_LOW && origin) {
+		abs_p = ptest;
+		abs_w = int2bound(&c->w, raw_w);
+		abs_x = int2bound(&c->x, raw_x - c->x.devmin);
+		abs_y = int2bound(&c->y, c->y.devmax - raw_y);
+		for (; f != dev->tp_data->finger + fingers; f++) {
+			ptest = int2bound(&c->p, raw2int(f->force_major));
+			if (ptest > PRESSURE_LOW)
+				nmax++;
+			if (ptest > PRESSURE_HIGH)
+				nmin++;
+		}
+	}
+
+	if (dev->fingers < nmin)
+		dev->fingers = nmin;
+	if (dev->fingers > nmax)
+		dev->fingers = nmax;
+
+	input_report_key(input, BTN_TOUCH, dev->fingers > 0);
+	input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
+	input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
+	input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
+
+	input_report_abs(input, ABS_PRESSURE, abs_p);
+	input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
+
+	if (abs_p) {
+		input_report_abs(input, ABS_X, abs_x);
+		input_report_abs(input, ABS_Y, abs_y);
+
+		dprintk(8,
+			"bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
+			"nmin: %d nmax: %d n: %d\n",
+			abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+
+	}
+
+	input_sync(input);
+
+	return 0;
+}
+
+/* Wellspring initialization constants */
+#define BCM5974_WELLSPRING_MODE_READ_REQUEST_ID		1
+#define BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID	9
+#define BCM5974_WELLSPRING_MODE_REQUEST_VALUE		0x300
+#define BCM5974_WELLSPRING_MODE_REQUEST_INDEX		0
+#define BCM5974_WELLSPRING_MODE_VENDOR_VALUE		0x01
+
+static int bcm5974_wellspring_mode(struct bcm5974 *dev)
+{
+	char *data = kmalloc(8, GFP_KERNEL);
+	int retval = 0, size;
+
+	if (!data) {
+		err("bcm5974: out of memory");
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	/* read configuration */
+	size = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+			BCM5974_WELLSPRING_MODE_READ_REQUEST_ID,
+			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+			BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+	if (size != 8) {
+		err("bcm5974: could not read from device");
+		retval = -EIO;
+		goto out;
+	}
+
+	/* apply the mode switch */
+	data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE;
+
+	/* write configuration */
+	size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+			BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+			BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+	if (size != 8) {
+		err("bcm5974: could not write to device");
+		retval = -EIO;
+		goto out;
+	}
+
+	dprintk(2, "bcm5974: switched to wellspring mode.\n");
+
+ out:
+	kfree(data);
+	return retval;
+}
+
+static void bcm5974_irq_button(struct urb *urb)
+{
+	struct bcm5974 *dev = urb->context;
+	int error;
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -EOVERFLOW:
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dbg("bcm5974: button urb shutting down: %d", urb->status);
+		return;
+	default:
+		dbg("bcm5974: button urb status: %d", urb->status);
+		goto exit;
+	}
+
+	if (report_bt_state(dev, dev->bt_urb->actual_length))
+		dprintk(1, "bcm5974: bad button package, length: %d\n",
+			dev->bt_urb->actual_length);
+
+exit:
+	error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
+	if (error)
+		err("bcm5974: button urb failed: %d", error);
+}
+
+static void bcm5974_irq_trackpad(struct urb *urb)
+{
+	struct bcm5974 *dev = urb->context;
+	int error;
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -EOVERFLOW:
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dbg("bcm5974: trackpad urb shutting down: %d", urb->status);
+		return;
+	default:
+		dbg("bcm5974: trackpad urb status: %d", urb->status);
+		goto exit;
+	}
+
+	/* control response ignored */
+	if (dev->tp_urb->actual_length == 2)
+		goto exit;
+
+	if (report_tp_state(dev, dev->tp_urb->actual_length))
+		dprintk(1, "bcm5974: bad trackpad package, length: %d\n",
+			dev->tp_urb->actual_length);
+
+exit:
+	error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
+	if (error)
+		err("bcm5974: trackpad urb failed: %d", error);
+}
+
+/*
+ * The Wellspring trackpad, like many recent Apple trackpads, share
+ * the usb device with the keyboard. Since keyboards are usually
+ * handled by the HID system, the device ends up being handled by two
+ * modules. Setting up the device therefore becomes slightly
+ * complicated. To enable multitouch features, a mode switch is
+ * required, which is usually applied via the control interface of the
+ * device.  It can be argued where this switch should take place. In
+ * some drivers, like appletouch, the switch is made during
+ * probe. However, the hid module may also alter the state of the
+ * device, resulting in trackpad malfunction under certain
+ * circumstances. To get around this problem, there is at least one
+ * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to
+ * recieve a reset_resume request rather than the normal resume.
+ * Since the implementation of reset_resume is equal to mode switch
+ * plus start_traffic, it seems easier to always do the switch when
+ * starting traffic on the device.
+ */
+static int bcm5974_start_traffic(struct bcm5974 *dev)
+{
+	if (bcm5974_wellspring_mode(dev)) {
+		dprintk(1, "bcm5974: mode switch failed\n");
+		goto error;
+	}
+
+	if (usb_submit_urb(dev->bt_urb, GFP_KERNEL))
+		goto error;
+
+	if (usb_submit_urb(dev->tp_urb, GFP_KERNEL))
+		goto err_kill_bt;
+
+	return 0;
+
+err_kill_bt:
+	usb_kill_urb(dev->bt_urb);
+error:
+	return -EIO;
+}
+
+static void bcm5974_pause_traffic(struct bcm5974 *dev)
+{
+	usb_kill_urb(dev->tp_urb);
+	usb_kill_urb(dev->bt_urb);
+}
+
+/*
+ * The code below implements open/close and manual suspend/resume.
+ * All functions may be called in random order.
+ *
+ * Opening a suspended device fails with EACCES - permission denied.
+ *
+ * Failing a resume leaves the device resumed but closed.
+ */
+static int bcm5974_open(struct input_dev *input)
+{
+	struct bcm5974 *dev = input_get_drvdata(input);
+	int error;
+
+	error = usb_autopm_get_interface(dev->intf);
+	if (error)
+		return error;
+
+	mutex_lock(&dev->pm_mutex);
+
+	error = bcm5974_start_traffic(dev);
+	if (!error)
+		dev->opened = 1;
+
+	mutex_unlock(&dev->pm_mutex);
+
+	if (error)
+		usb_autopm_put_interface(dev->intf);
+
+	return error;
+}
+
+static void bcm5974_close(struct input_dev *input)
+{
+	struct bcm5974 *dev = input_get_drvdata(input);
+
+	mutex_lock(&dev->pm_mutex);
+
+	bcm5974_pause_traffic(dev);
+	dev->opened = 0;
+
+	mutex_unlock(&dev->pm_mutex);
+
+	usb_autopm_put_interface(dev->intf);
+}
+
+static int bcm5974_suspend(struct usb_interface *iface, pm_message_t message)
+{
+	struct bcm5974 *dev = usb_get_intfdata(iface);
+
+	mutex_lock(&dev->pm_mutex);
+
+	if (dev->opened)
+		bcm5974_pause_traffic(dev);
+
+	mutex_unlock(&dev->pm_mutex);
+
+	return 0;
+}
+
+static int bcm5974_resume(struct usb_interface *iface)
+{
+	struct bcm5974 *dev = usb_get_intfdata(iface);
+	int error = 0;
+
+	mutex_lock(&dev->pm_mutex);
+
+	if (dev->opened)
+		error = bcm5974_start_traffic(dev);
+
+	mutex_unlock(&dev->pm_mutex);
+
+	return error;
+}
+
+static int bcm5974_probe(struct usb_interface *iface,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(iface);
+	const struct bcm5974_config *cfg;
+	struct bcm5974 *dev;
+	struct input_dev *input_dev;
+	int error = -ENOMEM;
+
+	/* find the product index */
+	cfg = bcm5974_get_config(udev);
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!dev || !input_dev) {
+		err("bcm5974: out of memory");
+		goto err_free_devs;
+	}
+
+	dev->udev = udev;
+	dev->intf = iface;
+	dev->input = input_dev;
+	dev->cfg = *cfg;
+	mutex_init(&dev->pm_mutex);
+
+	/* setup urbs */
+	dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->bt_urb)
+		goto err_free_devs;
+
+	dev->tp_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->tp_urb)
+		goto err_free_bt_urb;
+
+	dev->bt_data = usb_buffer_alloc(dev->udev,
+					dev->cfg.bt_datalen, GFP_KERNEL,
+					&dev->bt_urb->transfer_dma);
+	if (!dev->bt_data)
+		goto err_free_urb;
+
+	dev->tp_data = usb_buffer_alloc(dev->udev,
+					dev->cfg.tp_datalen, GFP_KERNEL,
+					&dev->tp_urb->transfer_dma);
+	if (!dev->tp_data)
+		goto err_free_bt_buffer;
+
+	usb_fill_int_urb(dev->bt_urb, udev,
+			 usb_rcvintpipe(udev, cfg->bt_ep),
+			 dev->bt_data, dev->cfg.bt_datalen,
+			 bcm5974_irq_button, dev, 1);
+
+	usb_fill_int_urb(dev->tp_urb, udev,
+			 usb_rcvintpipe(udev, cfg->tp_ep),
+			 dev->tp_data, dev->cfg.tp_datalen,
+			 bcm5974_irq_trackpad, dev, 1);
+
+	/* create bcm5974 device */
+	usb_make_path(udev, dev->phys, sizeof(dev->phys));
+	strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+	input_dev->name = "bcm5974";
+	input_dev->phys = dev->phys;
+	usb_to_input_id(dev->udev, &input_dev->id);
+	input_dev->dev.parent = &iface->dev;
+
+	input_set_drvdata(input_dev, dev);
+
+	input_dev->open = bcm5974_open;
+	input_dev->close = bcm5974_close;
+
+	setup_events_to_report(input_dev, cfg);
+
+	error = input_register_device(dev->input);
+	if (error)
+		goto err_free_buffer;
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(iface, dev);
+
+	return 0;
+
+err_free_buffer:
+	usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+		dev->tp_data, dev->tp_urb->transfer_dma);
+err_free_bt_buffer:
+	usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+		dev->bt_data, dev->bt_urb->transfer_dma);
+err_free_urb:
+	usb_free_urb(dev->tp_urb);
+err_free_bt_urb:
+	usb_free_urb(dev->bt_urb);
+err_free_devs:
+	usb_set_intfdata(iface, NULL);
+	input_free_device(input_dev);
+	kfree(dev);
+	return error;
+}
+
+static void bcm5974_disconnect(struct usb_interface *iface)
+{
+	struct bcm5974 *dev = usb_get_intfdata(iface);
+
+	usb_set_intfdata(iface, NULL);
+
+	input_unregister_device(dev->input);
+	usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+			dev->tp_data, dev->tp_urb->transfer_dma);
+	usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+			dev->bt_data, dev->bt_urb->transfer_dma);
+	usb_free_urb(dev->tp_urb);
+	usb_free_urb(dev->bt_urb);
+	kfree(dev);
+}
+
+static struct usb_driver bcm5974_driver = {
+	.name			= "bcm5974",
+	.probe			= bcm5974_probe,
+	.disconnect		= bcm5974_disconnect,
+	.suspend		= bcm5974_suspend,
+	.resume			= bcm5974_resume,
+	.reset_resume		= bcm5974_resume,
+	.id_table		= bcm5974_table,
+	.supports_autosuspend	= 1,
+};
+
+static int __init bcm5974_init(void)
+{
+	return usb_register(&bcm5974_driver);
+}
+
+static void __exit bcm5974_exit(void)
+{
+	usb_deregister(&bcm5974_driver);
+}
+
+module_init(bcm5974_init);
+module_exit(bcm5974_exit);
+
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 33929018487..72cf5e33790 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/input-polldev.h>
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 18a48636ba4..56c079ef501 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/iomd.h>
diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
index d9ca55891cd..692a79ec2a2 100644
--- a/drivers/input/serio/i8042-sparcio.h
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -1,10 +1,11 @@
 #ifndef _I8042_SPARCIO_H
 #define _I8042_SPARCIO_H
 
+#include <linux/of_device.h>
+
 #include <asm/io.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 static int i8042_kbd_irq = -1;
 static int i8042_aux_irq = -1;
@@ -41,6 +42,8 @@ static inline void i8042_write_command(int val)
 	writeb(val, kbd_iobase + 0x64UL);
 }
 
+#ifdef CONFIG_PCI
+
 #define OBP_PS2KBD_NAME1	"kb_ps2"
 #define OBP_PS2KBD_NAME2	"keyboard"
 #define OBP_PS2MS_NAME1		"kdmouse"
@@ -101,9 +104,6 @@ static struct of_platform_driver sparc_i8042_driver = {
 
 static int __init i8042_platform_init(void)
 {
-#ifndef CONFIG_PCI
-	return -ENODEV;
-#else
 	struct device_node *root = of_find_node_by_path("/");
 
 	if (!strcmp(root->name, "SUNW,JavaStation-1")) {
@@ -131,17 +131,25 @@ static int __init i8042_platform_init(void)
 	i8042_reset = 1;
 
 	return 0;
-#endif /* CONFIG_PCI */
 }
 
 static inline void i8042_platform_exit(void)
 {
-#ifdef CONFIG_PCI
 	struct device_node *root = of_find_node_by_path("/");
 
 	if (strcmp(root->name, "SUNW,JavaStation-1"))
 		of_unregister_driver(&sparc_i8042_driver);
-#endif
 }
 
+#else /* !CONFIG_PCI */
+static int __init i8042_platform_init(void)
+{
+	return -ENODEV;
+}
+
+static inline void i8042_platform_exit(void)
+{
+}
+#endif /* !CONFIG_PCI */
+
 #endif /* _I8042_SPARCIO_H */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index fe732a574ec..5aafe24984c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -305,7 +305,7 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 		.ident = "Lenovo 3000 n100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
 		},
 	},
 	{
@@ -394,6 +394,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"),
 		},
 	},
+	{
+		.ident = "Acer TravelMate 4280",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 1567b778247..7f36edd34f8 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -35,7 +35,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/iomd.h>
 #include <asm/system.h>
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index 0ed044d5e68..765007899d9 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -269,8 +269,8 @@ static int xps2_setup(struct device *dev, struct resource *regs_res,
 	 * we have the PS2 in a good state */
 	out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
 
-	dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n",
-		drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq);
+	dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%p, irq=%d\n",
+		drvdata->phys_addr, drvdata->base_address, drvdata->irq);
 
 	serio = &drvdata->serio;
 	serio->id.type = SERIO_8042;
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index b9b7a98bc5a..7df0228e836 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -64,7 +64,6 @@ Scott Hill shill@gtcocalcomp.com
 #include <asm/byteorder.h>
 
 
-#include <linux/version.h>
 #include <linux/usb/input.h>
 
 /* Version with a Major number of 2 is for kernel inclusion only. */
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6e60a97a234..25287e80e23 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -249,29 +249,26 @@ config TOUCHSCREEN_WM97XX
 config TOUCHSCREEN_WM9705
 	bool "WM9705 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
+	default y
 	help
-	  Say Y here if you have a Wolfson Microelectronics WM9705
-	  touchscreen controller connected to your system.
-
-	  If unsure, say N.
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9705 touchscreen controller.
 
 config TOUCHSCREEN_WM9712
 	bool "WM9712 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
+	default y
 	help
-	  Say Y here if you have a Wolfson Microelectronics WM9712
-	  touchscreen controller connected to your system.
-
-	  If unsure, say N.
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9712 touchscreen controller.
 
 config TOUCHSCREEN_WM9713
 	bool "WM9713 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
+	default y
 	help
-	  Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen
-	  controller connected to your system.
-
-	  If unsure, say N.
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9713 touchscreen controller.
 
 config TOUCHSCREEN_WM97XX_MAINSTONE
 	tristate "WM97xx Mainstone accelerated touch"
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index d0e13fc4a88..65202c9f63f 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -19,10 +19,10 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 
 #define PWR_MODE_ACTIVE		0
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 4f86081dc7f..4d3139e2099 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -39,8 +39,8 @@
 #include <linux/delay.h>
 
 /* SA1100 serial defines */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
 
 #define DRIVER_DESC	"H3600 touchscreen driver"
 
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index 1aca108b103..bf44f9d6834 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -19,8 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/jornada720.h>
+#include <mach/hardware.h>
+#include <mach/jornada720.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 590a1379aa3..37a555f3730 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -25,7 +25,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -33,7 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/wm97xx.h>
 #include <linux/io.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #define VERSION		"0.13"
 
diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c
index c1cd99d5898..504ca11749a 100644
--- a/drivers/input/touchscreen/migor_ts.c
+++ b/drivers/input/touchscreen/migor_ts.c
@@ -173,7 +173,7 @@ static int migor_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
 	input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
 
-	input->name = client->driver_name;
+	input->name = client->name;
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &client->dev;
 
@@ -192,7 +192,7 @@ static int migor_ts_probe(struct i2c_client *client,
 		goto err1;
 
 	error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW,
-			    client->driver_name, priv);
+			    client->name, priv);
 	if (error) {
 		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
 		goto err2;
@@ -224,12 +224,19 @@ static int migor_ts_remove(struct i2c_client *client)
 	return 0;
 }
 
+static const struct i2c_device_id migor_ts_id[] = {
+	{ "migor_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, migor_ts);
+
 static struct i2c_driver migor_ts_driver = {
 	.driver = {
 		.name = "migor_ts",
 	},
 	.probe = migor_ts_probe,
 	.remove = migor_ts_remove,
+	.id_table = migor_ts_id,
 };
 
 static int __init migor_ts_init(void)
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
index 978e1a13ffc..372efbc694f 100644
--- a/drivers/input/touchscreen/wm9705.c
+++ b/drivers/input/touchscreen/wm9705.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/delay.h>
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 4c5d85a249a..c8bb1e7335f 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/delay.h>
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 838458792ea..781ee83547e 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/delay.h>
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index cdc24ad314e..d589ab0e3ad 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -37,7 +37,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/drivers/isdn/Makefile b/drivers/isdn/Makefile
index 8380a4568d1..f1f777570e8 100644
--- a/drivers/isdn/Makefile
+++ b/drivers/isdn/Makefile
@@ -5,7 +5,7 @@
 obj-$(CONFIG_ISDN_I4L)			+= i4l/
 obj-$(CONFIG_ISDN_CAPI)			+= capi/
 obj-$(CONFIG_MISDN)			+= mISDN/
-obj-$(CONFIG_ISDN_CAPI)			+= hardware/
+obj-$(CONFIG_ISDN)			+= hardware/
 obj-$(CONFIG_ISDN_DIVERSION)		+= divert/
 obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax/
 obj-$(CONFIG_ISDN_DRV_ICN)		+= icn/
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index e30a7773f93..fbce5222d83 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -247,7 +247,6 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,
 #ifdef CONFIG_GIGASET_DEBUG
 	unsigned char c;
 	static char dbgline[3 * 32 + 1];
-	static const char hexdigit[] = "0123456789abcdef";
 	int i = 0;
 	while (count-- > 0) {
 		if (i > sizeof(dbgline) - 4) {
@@ -258,8 +257,8 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,
 		c = *bytes++;
 		dbgline[i] = (i && !(i % 12)) ? '-' : ' ';
 		i++;
-		dbgline[i++] = hexdigit[(c >> 4) & 0x0f];
-		dbgline[i++] = hexdigit[c & 0x0f];
+		dbgline[i++] = hex_asc_hi(c);
+		dbgline[i++] = hex_asc_lo(c);
 	}
 	dbgline[i] = '\0';
 	gig_dbg(level, "%s:%s", tag, dbgline);
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 2649ea55a9e..1eac03f39d0 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -140,7 +140,7 @@
  * #define HFC_REGISTER_DEBUG
  */
 
-static const char *hfcmulti_revision = "2.00";
+static const char *hfcmulti_revision = "2.02";
 
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -427,12 +427,12 @@ write_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
 {
 	outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
 	while (len>>2) {
-		outl(*(u32 *)data, hc->pci_iobase);
+		outl(cpu_to_le32(*(u32 *)data), hc->pci_iobase);
 		data += 4;
 		len -= 4;
 	}
 	while (len>>1) {
-		outw(*(u16 *)data, hc->pci_iobase);
+		outw(cpu_to_le16(*(u16 *)data), hc->pci_iobase);
 		data += 2;
 		len -= 2;
 	}
@@ -447,17 +447,19 @@ void
 write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
 {
 	while (len>>2) {
-		writel(*(u32 *)data, (hc->pci_membase)+A_FIFO_DATA0);
+		writel(cpu_to_le32(*(u32 *)data),
+			hc->pci_membase + A_FIFO_DATA0);
 		data += 4;
 		len -= 4;
 	}
 	while (len>>1) {
-		writew(*(u16 *)data, (hc->pci_membase)+A_FIFO_DATA0);
+		writew(cpu_to_le16(*(u16 *)data),
+			hc->pci_membase + A_FIFO_DATA0);
 		data += 2;
 		len -= 2;
 	}
 	while (len) {
-		writeb(*data, (hc->pci_membase)+A_FIFO_DATA0);
+		writeb(*data, hc->pci_membase + A_FIFO_DATA0);
 		data++;
 		len--;
 	}
@@ -468,12 +470,12 @@ read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
 {
 	outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
 	while (len>>2) {
-		*(u32 *)data = inl(hc->pci_iobase);
+		*(u32 *)data = le32_to_cpu(inl(hc->pci_iobase));
 		data += 4;
 		len -= 4;
 	}
 	while (len>>1) {
-		*(u16 *)data = inw(hc->pci_iobase);
+		*(u16 *)data = le16_to_cpu(inw(hc->pci_iobase));
 		data += 2;
 		len -= 2;
 	}
@@ -490,18 +492,18 @@ read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
 {
 	while (len>>2) {
 		*(u32 *)data =
-			readl((hc->pci_membase)+A_FIFO_DATA0);
+			le32_to_cpu(readl(hc->pci_membase + A_FIFO_DATA0));
 		data += 4;
 		len -= 4;
 	}
 	while (len>>1) {
 		*(u16 *)data =
-			readw((hc->pci_membase)+A_FIFO_DATA0);
+			le16_to_cpu(readw(hc->pci_membase + A_FIFO_DATA0));
 		data += 2;
 		len -= 2;
 	}
 	while (len) {
-		*data = readb((hc->pci_membase)+A_FIFO_DATA0);
+		*data = readb(hc->pci_membase + A_FIFO_DATA0);
 		data++;
 		len--;
 	}
@@ -3971,7 +3973,7 @@ open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
 	struct bchannel	*bch;
 	int		ch;
 
-	if (!test_bit(rq->adr.channel, &dch->dev.channelmap[0]))
+	if (!test_channelmap(rq->adr.channel, dch->dev.channelmap))
 		return -EINVAL;
 	if (rq->protocol == ISDN_P_NONE)
 		return -EINVAL;
@@ -4587,7 +4589,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m)
 		list_add(&bch->ch.list, &dch->dev.bchannels);
 		hc->chan[ch].bch = bch;
 		hc->chan[ch].port = 0;
-		test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
+		set_channelmap(bch->nr, dch->dev.channelmap);
 	}
 	/* set optical line type */
 	if (port[Port_cnt] & 0x001) {
@@ -4755,7 +4757,7 @@ init_multi_port(struct hfc_multi *hc, int pt)
 		list_add(&bch->ch.list, &dch->dev.bchannels);
 		hc->chan[i + ch].bch = bch;
 		hc->chan[i + ch].port = pt;
-		test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
+		set_channelmap(bch->nr, dch->dev.channelmap);
 	}
 	/* set master clock */
 	if (port[Port_cnt] & 0x001) {
@@ -5050,12 +5052,12 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev)
 
 static const struct hm_map hfcm_map[] = {
 /*0*/	{VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
-/*1*/	{VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S},
+/*1*/	{VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0},
 /*2*/	{VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
 /*3*/	{VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
 /*4*/	{VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
 /*5*/	{VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
-/*6*/	{VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, 0, 0},
+/*6*/	{VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0},
 /*7*/	{VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
 /*8*/	{VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
 /*9*/	{VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
@@ -5251,9 +5253,6 @@ HFCmulti_init(void)
 	if (debug & DEBUG_HFCMULTI_INIT)
 		printk(KERN_DEBUG "%s: init entered\n", __func__);
 
-#ifdef __BIG_ENDIAN
-#error "not running on big endian machines now"
-#endif
 	hfc_interrupt = symbol_get(ztdummy_extern_interrupt);
 	register_interrupt = symbol_get(ztdummy_register_interrupt);
 	unregister_interrupt = symbol_get(ztdummy_unregister_interrupt);
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 3231814e7ef..9cf5edbb1a9 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -2056,7 +2056,7 @@ setup_card(struct hfc_pci *card)
 	card->dch.dev.nrbchan = 2;
 	for (i = 0; i < 2; i++) {
 		card->bch[i].nr = i + 1;
-		test_and_set_bit(i + 1, &card->dch.dev.channelmap[0]);
+		set_channelmap(i + 1, card->dch.dev.channelmap);
 		card->bch[i].debug = debug;
 		mISDN_initbchannel(&card->bch[i], MAX_DATA_MEM);
 		card->bch[i].hw = card;
diff --git a/drivers/isdn/hysdn/hysdn_pof.h b/drivers/isdn/hysdn/hysdn_pof.h
index a368d6caca0..3a72b908900 100644
--- a/drivers/isdn/hysdn/hysdn_pof.h
+++ b/drivers/isdn/hysdn/hysdn_pof.h
@@ -60,7 +60,7 @@ typedef struct PofRecHdr_tag {	/* Pof record header */
 
 typedef struct PofTimeStamp_tag {
 /*00 */ unsigned long UnixTime __attribute__((packed));
-	/*04 */ unsigned char DateTimeText[0x28] __attribute__((packed));
+	/*04 */ unsigned char DateTimeText[0x28];
 	/* =40 */
 /*2C */
 } tPofTimeStamp;
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index 155b99780c4..e42150a5778 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -1006,8 +1006,7 @@ open_bchannel(struct l1oip *hc, struct dchannel *dch, struct channel_req *rq)
 	struct bchannel	*bch;
 	int		ch;
 
-	if (!test_bit(rq->adr.channel & 0x1f,
-		&dch->dev.channelmap[rq->adr.channel >> 5]))
+	if (!test_channelmap(rq->adr.channel, dch->dev.channelmap))
 		return -EINVAL;
 	if (rq->protocol == ISDN_P_NONE)
 		return -EINVAL;
@@ -1412,8 +1411,7 @@ init_card(struct l1oip *hc, int pri, int bundle)
 		bch->ch.nr = i + ch;
 		list_add(&bch->ch.list, &dch->dev.bchannels);
 		hc->chan[i + ch].bch = bch;
-		test_and_set_bit(bch->nr & 0x1f,
-			&dch->dev.channelmap[bch->nr >> 5]);
+		set_channelmap(bch->nr, dch->dev.channelmap);
 	}
 	ret = mISDN_register_device(&dch->dev, hc->name);
 	if (ret)
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index 4ba4cc364c9..e5a20f9542d 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -379,7 +379,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			di.Bprotocols = dev->Bprotocols | get_all_Bprotocols();
 			di.protocol = dev->D.protocol;
 			memcpy(di.channelmap, dev->channelmap,
-				MISDN_CHMAP_SIZE * 4);
+				sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
 			strcpy(di.name, dev->name);
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
@@ -637,7 +637,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			di.Bprotocols = dev->Bprotocols | get_all_Bprotocols();
 			di.protocol = dev->D.protocol;
 			memcpy(di.channelmap, dev->channelmap,
-				MISDN_CHMAP_SIZE * 4);
+				sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
 			strcpy(di.name, dev->name);
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c
index c37bb0d5a0c..32c98b2efa3 100644
--- a/drivers/leds/leds-ams-delta.c
+++ b/drivers/leds/leds-ams-delta.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <asm/arch/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
 
 /*
  * Our context
diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
index accc7eddb78..836a43d776e 100644
--- a/drivers/leds/leds-cm-x270.c
+++ b/drivers/leds/leds-cm-x270.c
@@ -18,8 +18,8 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 
 #define GPIO_RED_LED			(93)
 #define GPIO_GREEN_LED			(94)
diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c
index a709704b9f9..bc2dcd89f63 100644
--- a/drivers/leds/leds-corgi.c
+++ b/drivers/leds/leds-corgi.c
@@ -15,10 +15,9 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 #include <asm/hardware/scoop.h>
 
 static void corgiled_amber_set(struct led_classdev *led_cdev,
diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index a7421b8c47d..be0e12144b8 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -19,7 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 static short __iomem *latch_address;
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 73c70502168..11b77a70bbc 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -16,9 +16,9 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/h1940-latch.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/h1940-latch.h>
 
 /*
  * Green led.
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 7295f7f5218..5d91362e306 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -13,7 +13,7 @@
 #include <linux/device.h>
 #include <linux/leds.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/locomo.h>
 
 static void locomoled_brightness_set(struct led_classdev *led_cdev,
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index d4f5021dccb..25a07f2643a 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -16,9 +16,9 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 /* our context */
 
diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c
index e75e8543bc5..178831c64bf 100644
--- a/drivers/leds/leds-spitz.c
+++ b/drivers/leds/leds-spitz.c
@@ -17,9 +17,9 @@
 #include <linux/leds.h>
 #include <asm/hardware/scoop.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/spitz.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/spitz.h>
 
 static void spitzled_amber_set(struct led_classdev *led_cdev,
 			       enum led_brightness value)
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 37344aaee22..a661bbdae3d 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -98,6 +98,10 @@ static u32 lg_get_features(struct virtio_device *vdev)
 	return features;
 }
 
+/* The virtio core takes the features the Host offers, and copies the
+ * ones supported by the driver into the vdev->features array.  Once
+ * that's all sorted out, this routine is called so we can tell the
+ * Host which features we understand and accept. */
 static void lg_finalize_features(struct virtio_device *vdev)
 {
 	unsigned int i, bits;
@@ -108,6 +112,10 @@ static void lg_finalize_features(struct virtio_device *vdev)
 	/* Give virtio_ring a chance to accept features. */
 	vring_transport_features(vdev);
 
+	/* The vdev->feature array is a Linux bitmask: this isn't the
+	 * same as a the simple array of bits used by lguest devices
+	 * for features.  So we do this slow, manual conversion which is
+	 * completely general. */
 	memset(out_features, 0, desc->feature_len);
 	bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
 	for (i = 0; i < bits; i++) {
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index d93500f24fb..81d0c605344 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -108,9 +108,8 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
 }
 /*:*/
 
-/*M:014 get_pfn is slow; it takes the mmap sem and calls get_user_pages.  We
- * could probably try to grab batches of pages here as an optimization
- * (ie. pre-faulting). :*/
+/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
+ * an optimization (ie. pre-faulting). :*/
 
 /*H:350 This routine takes a page number given by the Guest and converts it to
  * an actual, physical page number.  It can fail for several reasons: the
@@ -123,19 +122,13 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
 static unsigned long get_pfn(unsigned long virtpfn, int write)
 {
 	struct page *page;
-	/* This value indicates failure. */
-	unsigned long ret = -1UL;
 
-	/* get_user_pages() is a complex interface: it gets the "struct
-	 * vm_area_struct" and "struct page" assocated with a range of pages.
-	 * It also needs the task's mmap_sem held, and is not very quick.
-	 * It returns the number of pages it got. */
-	down_read(&current->mm->mmap_sem);
-	if (get_user_pages(current, current->mm, virtpfn << PAGE_SHIFT,
-			   1, write, 1, &page, NULL) == 1)
-		ret = page_to_pfn(page);
-	up_read(&current->mm->mmap_sem);
-	return ret;
+	/* gup me one page at this address please! */
+	if (get_user_pages_fast(virtpfn << PAGE_SHIFT, 1, write, &page) == 1)
+		return page_to_pfn(page);
+
+	/* This value indicates failure. */
+	return -1UL;
 }
 
 /*H:340 Converting a Guest page table entry to a shadow (ie. real) page table
@@ -174,7 +167,7 @@ static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
 /*H:460 And to complete the chain, release_pte() looks like this: */
 static void release_pte(pte_t pte)
 {
-	/* Remember that get_user_pages() took a reference to the page, in
+	/* Remember that get_user_pages_fast() took a reference to the page, in
 	 * get_pfn()?  We have to put it back now. */
 	if (pte_flags(pte) & _PAGE_PRESENT)
 		put_page(pfn_to_page(pte_pfn(pte)));
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index b1e5b470525..d7e46d345d9 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -16,7 +16,6 @@
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
-#include <linux/hdreg.h>
 #include <linux/stddef.h>
 #include <linux/init.h>
 #include <linux/ide.h>
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 621a272a2c7..ac89a5deaca 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -238,15 +238,47 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde
 
 }
 
+static mdk_rdev_t *next_active_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
+{
+	/* Iterate the disks of an mddev, using rcu to protect access to the
+	 * linked list, and raising the refcount of devices we return to ensure
+	 * they don't disappear while in use.
+	 * As devices are only added or removed when raid_disk is < 0 and
+	 * nr_pending is 0 and In_sync is clear, the entries we return will
+	 * still be in the same position on the list when we re-enter
+	 * list_for_each_continue_rcu.
+	 */
+	struct list_head *pos;
+	rcu_read_lock();
+	if (rdev == NULL)
+		/* start at the beginning */
+		pos = &mddev->disks;
+	else {
+		/* release the previous rdev and start from there. */
+		rdev_dec_pending(rdev, mddev);
+		pos = &rdev->same_set;
+	}
+	list_for_each_continue_rcu(pos, &mddev->disks) {
+		rdev = list_entry(pos, mdk_rdev_t, same_set);
+		if (rdev->raid_disk >= 0 &&
+		    test_bit(In_sync, &rdev->flags) &&
+		    !test_bit(Faulty, &rdev->flags)) {
+			/* this is a usable devices */
+			atomic_inc(&rdev->nr_pending);
+			rcu_read_unlock();
+			return rdev;
+		}
+	}
+	rcu_read_unlock();
+	return NULL;
+}
+
 static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
 {
-	mdk_rdev_t *rdev;
+	mdk_rdev_t *rdev = NULL;
 	mddev_t *mddev = bitmap->mddev;
 
-	rcu_read_lock();
-	rdev_for_each_rcu(rdev, mddev)
-		if (test_bit(In_sync, &rdev->flags)
-		    && !test_bit(Faulty, &rdev->flags)) {
+	while ((rdev = next_active_rdev(rdev, mddev)) != NULL) {
 			int size = PAGE_SIZE;
 			if (page->index == bitmap->file_pages-1)
 				size = roundup(bitmap->last_page_size,
@@ -281,8 +313,7 @@ static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
 				       + page->index * (PAGE_SIZE/512),
 				       size,
 				       page);
-		}
-	rcu_read_unlock();
+	}
 
 	if (wait)
 		md_super_wait(mddev);
@@ -1234,7 +1265,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect
 		case 0:
 			bitmap_file_set_bit(bitmap, offset);
 			bitmap_count_page(bitmap,offset, 1);
-			blk_plug_device(bitmap->mddev->queue);
+			blk_plug_device_unlocked(bitmap->mddev->queue);
 			/* fall through */
 		case 1:
 			*bmc = 2;
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 798e468103b..61f44140923 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -316,29 +316,12 @@ static inline int check_space(struct dm_table *t)
  */
 static int lookup_device(const char *path, dev_t *dev)
 {
-	int r;
-	struct nameidata nd;
-	struct inode *inode;
-
-	if ((r = path_lookup(path, LOOKUP_FOLLOW, &nd)))
-		return r;
-
-	inode = nd.path.dentry->d_inode;
-	if (!inode) {
-		r = -ENOENT;
-		goto out;
-	}
-
-	if (!S_ISBLK(inode->i_mode)) {
-		r = -ENOTBLK;
-		goto out;
-	}
-
-	*dev = inode->i_rdev;
-
- out:
-	path_put(&nd.path);
-	return r;
+	struct block_device *bdev = lookup_bdev(path);
+	if (IS_ERR(bdev))
+		return PTR_ERR(bdev);
+	*dev = bdev->bd_dev;
+	bdput(bdev);
+	return 0;
 }
 
 /*
diff --git a/drivers/md/md.c b/drivers/md/md.c
index c2ff77ccec5..deeac4b4417 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2393,6 +2393,8 @@ static void analyze_sbs(mddev_t * mddev)
 
 }
 
+static void md_safemode_timeout(unsigned long data);
+
 static ssize_t
 safe_delay_show(mddev_t *mddev, char *page)
 {
@@ -2432,9 +2434,12 @@ safe_delay_store(mddev_t *mddev, const char *cbuf, size_t len)
 	if (msec == 0)
 		mddev->safemode_delay = 0;
 	else {
+		unsigned long old_delay = mddev->safemode_delay;
 		mddev->safemode_delay = (msec*HZ)/1000;
 		if (mddev->safemode_delay == 0)
 			mddev->safemode_delay = 1;
+		if (mddev->safemode_delay < old_delay)
+			md_safemode_timeout((unsigned long)mddev);
 	}
 	return len;
 }
@@ -3483,7 +3488,7 @@ static void md_safemode_timeout(unsigned long data)
 	if (!atomic_read(&mddev->writes_pending)) {
 		mddev->safemode = 1;
 		if (mddev->external)
-			sysfs_notify(&mddev->kobj, NULL, "array_state");
+			set_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags);
 	}
 	md_wakeup_thread(mddev->thread);
 }
@@ -3836,8 +3841,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 
 		del_timer_sync(&mddev->safemode_timer);
 
-		invalidate_partition(disk, 0);
-
 		switch(mode) {
 		case 1: /* readonly */
 			err  = -ENXIO;
@@ -4634,6 +4637,11 @@ static int update_size(mddev_t *mddev, sector_t num_sectors)
 	 */
 	if (mddev->sync_thread)
 		return -EBUSY;
+	if (mddev->bitmap)
+		/* Sorry, cannot grow a bitmap yet, just remove it,
+		 * grow, and re-add.
+		 */
+		return -EBUSY;
 	rdev_for_each(rdev, tmp, mddev) {
 		sector_t avail;
 		avail = rdev->size * 2;
@@ -5753,7 +5761,11 @@ void md_do_sync(mddev_t *mddev)
 					 * time 'round when curr_resync == 2
 					 */
 					continue;
-				prepare_to_wait(&resync_wait, &wq, TASK_UNINTERRUPTIBLE);
+				/* We need to wait 'interruptible' so as not to
+				 * contribute to the load average, and not to
+				 * be caught by 'softlockup'
+				 */
+				prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
 				if (!kthread_should_stop() &&
 				    mddev2->curr_resync >= mddev->curr_resync) {
 					printk(KERN_INFO "md: delaying %s of %s"
@@ -5761,6 +5773,8 @@ void md_do_sync(mddev_t *mddev)
 					       " share one or more physical units)\n",
 					       desc, mdname(mddev), mdname(mddev2));
 					mddev_put(mddev2);
+					if (signal_pending(current))
+						flush_signals(current);
 					schedule();
 					finish_wait(&resync_wait, &wq);
 					goto try_again;
@@ -5993,10 +6007,11 @@ static int remove_and_add_spares(mddev_t *mddev)
 			}
 		}
 
-	if (mddev->degraded) {
+	if (mddev->degraded && ! mddev->ro) {
 		rdev_for_each(rdev, rtmp, mddev) {
 			if (rdev->raid_disk >= 0 &&
-			    !test_bit(In_sync, &rdev->flags))
+			    !test_bit(In_sync, &rdev->flags) &&
+			    !test_bit(Blocked, &rdev->flags))
 				spares++;
 			if (rdev->raid_disk < 0
 			    && !test_bit(Faulty, &rdev->flags)) {
@@ -6051,6 +6066,9 @@ void md_check_recovery(mddev_t *mddev)
 	if (mddev->bitmap)
 		bitmap_daemon_work(mddev->bitmap);
 
+	if (test_and_clear_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags))
+		sysfs_notify(&mddev->kobj, NULL, "array_state");
+
 	if (mddev->ro)
 		return;
 
@@ -6063,6 +6081,8 @@ void md_check_recovery(mddev_t *mddev)
 		flush_signals(current);
 	}
 
+	if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
+		return;
 	if ( ! (
 		(mddev->flags && !mddev->external) ||
 		test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
@@ -6076,6 +6096,15 @@ void md_check_recovery(mddev_t *mddev)
 	if (mddev_trylock(mddev)) {
 		int spares = 0;
 
+		if (mddev->ro) {
+			/* Only thing we do on a ro array is remove
+			 * failed devices.
+			 */
+			remove_and_add_spares(mddev);
+			clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+			goto unlock;
+		}
+
 		if (!mddev->external) {
 			int did_change = 0;
 			spin_lock_irq(&mddev->write_lock);
@@ -6113,7 +6142,8 @@ void md_check_recovery(mddev_t *mddev)
 			/* resync has finished, collect result */
 			md_unregister_thread(mddev->sync_thread);
 			mddev->sync_thread = NULL;
-			if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+			if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
+			    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
 				/* success...*/
 				/* activate any spares */
 				if (mddev->pers->spare_active(mddev))
@@ -6165,6 +6195,7 @@ void md_check_recovery(mddev_t *mddev)
 		} else if ((spares = remove_and_add_spares(mddev))) {
 			clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
 			clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+			clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
 			set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
 		} else if (mddev->recovery_cp < MaxSector) {
 			set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
@@ -6228,7 +6259,11 @@ static int md_notify_reboot(struct notifier_block *this,
 
 		for_each_mddev(mddev, tmp)
 			if (mddev_trylock(mddev)) {
-				do_md_stop (mddev, 1, 0);
+				/* Force a switch to readonly even array
+				 * appears to still be in use.  Hence
+				 * the '100'.
+				 */
+				do_md_stop (mddev, 1, 100);
 				mddev_unlock(mddev);
 			}
 		/*
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 159535d7356..e34cd0e6247 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -76,11 +76,13 @@ static void r10bio_pool_free(void *r10_bio, void *data)
 	kfree(r10_bio);
 }
 
+/* Maximum size of each resync request */
 #define RESYNC_BLOCK_SIZE (64*1024)
-//#define RESYNC_BLOCK_SIZE PAGE_SIZE
-#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
 #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
-#define RESYNC_WINDOW (2048*1024)
+/* amount of memory to reserve for resync requests */
+#define RESYNC_WINDOW (1024*1024)
+/* maximum number of concurrent requests, memory permitting */
+#define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE)
 
 /*
  * When performing a resync, we need to read and compare, so
@@ -215,6 +217,9 @@ static void reschedule_retry(r10bio_t *r10_bio)
 	conf->nr_queued ++;
 	spin_unlock_irqrestore(&conf->device_lock, flags);
 
+	/* wake up frozen array... */
+	wake_up(&conf->wait_barrier);
+
 	md_wakeup_thread(mddev->thread);
 }
 
@@ -687,7 +692,6 @@ static int flush_pending_writes(conf_t *conf)
  *    there is no normal IO happeing.  It must arrange to call
  *    lower_barrier when the particular background IO completes.
  */
-#define RESYNC_DEPTH 32
 
 static void raise_barrier(conf_t *conf, int force)
 {
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 55e7c56045a..224de022e7c 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2507,7 +2507,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh,
  *
  */
 
-static void handle_stripe5(struct stripe_head *sh)
+static bool handle_stripe5(struct stripe_head *sh)
 {
 	raid5_conf_t *conf = sh->raid_conf;
 	int disks = sh->disks, i;
@@ -2568,10 +2568,10 @@ static void handle_stripe5(struct stripe_head *sh)
 		if (dev->written)
 			s.written++;
 		rdev = rcu_dereference(conf->disks[i].rdev);
-		if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+		if (blocked_rdev == NULL &&
+		    rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
-			break;
 		}
 		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
 			/* The ReadError flag will just be confusing now */
@@ -2588,8 +2588,14 @@ static void handle_stripe5(struct stripe_head *sh)
 	rcu_read_unlock();
 
 	if (unlikely(blocked_rdev)) {
-		set_bit(STRIPE_HANDLE, &sh->state);
-		goto unlock;
+		if (s.syncing || s.expanding || s.expanded ||
+		    s.to_write || s.written) {
+			set_bit(STRIPE_HANDLE, &sh->state);
+			goto unlock;
+		}
+		/* There is nothing for the blocked_rdev to block */
+		rdev_dec_pending(blocked_rdev, conf->mddev);
+		blocked_rdev = NULL;
 	}
 
 	if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
@@ -2717,10 +2723,11 @@ static void handle_stripe5(struct stripe_head *sh)
 	if (sh->reconstruct_state == reconstruct_state_result) {
 		sh->reconstruct_state = reconstruct_state_idle;
 		clear_bit(STRIPE_EXPANDING, &sh->state);
-		for (i = conf->raid_disks; i--; )
+		for (i = conf->raid_disks; i--; ) {
 			set_bit(R5_Wantwrite, &sh->dev[i].flags);
-			set_bit(R5_LOCKED, &dev->flags);
+			set_bit(R5_LOCKED, &sh->dev[i].flags);
 			s.locked++;
+		}
 	}
 
 	if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) &&
@@ -2754,9 +2761,11 @@ static void handle_stripe5(struct stripe_head *sh)
 	ops_run_io(sh, &s);
 
 	return_io(return_bi);
+
+	return blocked_rdev == NULL;
 }
 
-static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
+static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 {
 	raid6_conf_t *conf = sh->raid_conf;
 	int disks = sh->disks;
@@ -2829,10 +2838,10 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 		if (dev->written)
 			s.written++;
 		rdev = rcu_dereference(conf->disks[i].rdev);
-		if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+		if (blocked_rdev == NULL &&
+		    rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
-			break;
 		}
 		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
 			/* The ReadError flag will just be confusing now */
@@ -2850,9 +2859,16 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 	rcu_read_unlock();
 
 	if (unlikely(blocked_rdev)) {
-		set_bit(STRIPE_HANDLE, &sh->state);
-		goto unlock;
+		if (s.syncing || s.expanding || s.expanded ||
+		    s.to_write || s.written) {
+			set_bit(STRIPE_HANDLE, &sh->state);
+			goto unlock;
+		}
+		/* There is nothing for the blocked_rdev to block */
+		rdev_dec_pending(blocked_rdev, conf->mddev);
+		blocked_rdev = NULL;
 	}
+
 	pr_debug("locked=%d uptodate=%d to_read=%d"
 	       " to_write=%d failed=%d failed_num=%d,%d\n",
 	       s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
@@ -2967,14 +2983,17 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 	ops_run_io(sh, &s);
 
 	return_io(return_bi);
+
+	return blocked_rdev == NULL;
 }
 
-static void handle_stripe(struct stripe_head *sh, struct page *tmp_page)
+/* returns true if the stripe was handled */
+static bool handle_stripe(struct stripe_head *sh, struct page *tmp_page)
 {
 	if (sh->raid_conf->level == 6)
-		handle_stripe6(sh, tmp_page);
+		return handle_stripe6(sh, tmp_page);
 	else
-		handle_stripe5(sh);
+		return handle_stripe5(sh);
 }
 
 
@@ -3692,7 +3711,9 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski
 	clear_bit(STRIPE_INSYNC, &sh->state);
 	spin_unlock(&sh->lock);
 
-	handle_stripe(sh, NULL);
+	/* wait for any blocked device to be handled */
+	while(unlikely(!handle_stripe(sh, NULL)))
+		;
 	release_stripe(sh);
 
 	return STRIPE_SECTORS;
@@ -3811,10 +3832,8 @@ static void raid5d(mddev_t *mddev)
 
 		sh = __get_priority_stripe(conf);
 
-		if (!sh) {
-			async_tx_issue_pending_all();
+		if (!sh)
 			break;
-		}
 		spin_unlock_irq(&conf->device_lock);
 		
 		handled++;
@@ -3827,6 +3846,7 @@ static void raid5d(mddev_t *mddev)
 
 	spin_unlock_irq(&conf->device_lock);
 
+	async_tx_issue_pending_all();
 	unplug_slaves(mddev);
 
 	pr_debug("--- raid5d inactive\n");
@@ -4439,6 +4459,9 @@ static int raid5_check_reshape(mddev_t *mddev)
 		return -EINVAL; /* Cannot shrink array or change level yet */
 	if (mddev->delta_disks == 0)
 		return 0; /* nothing to do */
+	if (mddev->bitmap)
+		/* Cannot grow a bitmap yet */
+		return -EBUSY;
 
 	/* Can only proceed if there are plenty of stripe_heads.
 	 * We need a minimum of one full stripe,, and for sensible progress
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index e8bc7abf240..99be9e5c85f 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -1068,7 +1068,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 	{
 		v4l2_std_id *id = arg;
 		int found = 0;
-		int i, err;
+		int i;
 
 		DEB_EE(("VIDIOC_S_STD\n"));
 
@@ -1116,7 +1116,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 	case VIDIOC_OVERLAY:
 	{
 		int on = *(int *)arg;
-		int err = 0;
 
 		DEB_D(("VIDIOC_OVERLAY on:%d\n",on));
 		if (on != 0) {
@@ -1192,7 +1191,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 	case VIDIOCGMBUF:
 	{
 		struct video_mbuf *mbuf = arg;
-		struct videobuf_queue *q;
 		int i;
 
 		/* fixme: number of capture buffers and sizes for v4l apps */
diff --git a/drivers/media/common/tuners/mt2131.c b/drivers/media/common/tuners/mt2131.c
index e254bcfc2ef..e8d3c48f860 100644
--- a/drivers/media/common/tuners/mt2131.c
+++ b/drivers/media/common/tuners/mt2131.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/mt2131.h b/drivers/media/common/tuners/mt2131.h
index cd8376f6f7b..6632de640df 100644
--- a/drivers/media/common/tuners/mt2131.h
+++ b/drivers/media/common/tuners/mt2131.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/mt2131_priv.h b/drivers/media/common/tuners/mt2131_priv.h
index e930759c2c0..4e05a67e88c 100644
--- a/drivers/media/common/tuners/mt2131_priv.h
+++ b/drivers/media/common/tuners/mt2131_priv.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
index 0dc2bef9f6a..227642b044a 100644
--- a/drivers/media/common/tuners/mxl5005s.c
+++ b/drivers/media/common/tuners/mxl5005s.c
@@ -2,7 +2,7 @@
     MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
 
     Copyright (C) 2008 MaxLinear
-    Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
       Functions:
 	mxl5005s_reset()
 	mxl5005s_writereg()
@@ -3837,7 +3837,7 @@ static u16 MXL_Hystersis_Test(struct dvb_frontend *fe, int Hystersis)
 /* ----------------------------------------------------------------
  * Begin: Everything after here is new code to adapt the
  * proprietary Realtek driver into a Linux API tuner.
- * Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
  */
 static int mxl5005s_reset(struct dvb_frontend *fe)
 {
diff --git a/drivers/media/common/tuners/mxl5005s.h b/drivers/media/common/tuners/mxl5005s.h
index 396db150bf0..7ac6815b30a 100644
--- a/drivers/media/common/tuners/mxl5005s.h
+++ b/drivers/media/common/tuners/mxl5005s.h
@@ -2,7 +2,7 @@
     MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
 
     Copyright (C) 2008 MaxLinear
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index 597e47f5d69..aa773a658a2 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -253,7 +253,7 @@ static struct tuner_params *simple_tuner_params(struct dvb_frontend *fe,
 
 static int simple_config_lookup(struct dvb_frontend *fe,
 				struct tuner_params *t_params,
-				int *frequency, u8 *config, u8 *cb)
+				unsigned *frequency, u8 *config, u8 *cb)
 {
 	struct tuner_simple_priv *priv = fe->tuner_priv;
 	int i;
@@ -587,45 +587,45 @@ static int simple_set_tv_freq(struct dvb_frontend *fe,
 	priv->last_div = div;
 	if (t_params->has_tda9887) {
 		struct v4l2_priv_tun_config tda9887_cfg;
-		int config = 0;
+		int tda_config = 0;
 		int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
 						 V4L2_STD_SECAM_LC)) &&
 			!(params->std & ~(V4L2_STD_SECAM_L |
 					  V4L2_STD_SECAM_LC));
 
 		tda9887_cfg.tuner = TUNER_TDA9887;
-		tda9887_cfg.priv  = &config;
+		tda9887_cfg.priv  = &tda_config;
 
 		if (params->std == V4L2_STD_SECAM_LC) {
 			if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
-				config |= TDA9887_PORT1_ACTIVE;
+				tda_config |= TDA9887_PORT1_ACTIVE;
 			if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
-				config |= TDA9887_PORT2_ACTIVE;
+				tda_config |= TDA9887_PORT2_ACTIVE;
 		} else {
 			if (t_params->port1_active)
-				config |= TDA9887_PORT1_ACTIVE;
+				tda_config |= TDA9887_PORT1_ACTIVE;
 			if (t_params->port2_active)
-				config |= TDA9887_PORT2_ACTIVE;
+				tda_config |= TDA9887_PORT2_ACTIVE;
 		}
 		if (t_params->intercarrier_mode)
-			config |= TDA9887_INTERCARRIER;
+			tda_config |= TDA9887_INTERCARRIER;
 		if (is_secam_l) {
 			if (i == 0 && t_params->default_top_secam_low)
-				config |= TDA9887_TOP(t_params->default_top_secam_low);
+				tda_config |= TDA9887_TOP(t_params->default_top_secam_low);
 			else if (i == 1 && t_params->default_top_secam_mid)
-				config |= TDA9887_TOP(t_params->default_top_secam_mid);
+				tda_config |= TDA9887_TOP(t_params->default_top_secam_mid);
 			else if (t_params->default_top_secam_high)
-				config |= TDA9887_TOP(t_params->default_top_secam_high);
+				tda_config |= TDA9887_TOP(t_params->default_top_secam_high);
 		} else {
 			if (i == 0 && t_params->default_top_low)
-				config |= TDA9887_TOP(t_params->default_top_low);
+				tda_config |= TDA9887_TOP(t_params->default_top_low);
 			else if (i == 1 && t_params->default_top_mid)
-				config |= TDA9887_TOP(t_params->default_top_mid);
+				tda_config |= TDA9887_TOP(t_params->default_top_mid);
 			else if (t_params->default_top_high)
-				config |= TDA9887_TOP(t_params->default_top_high);
+				tda_config |= TDA9887_TOP(t_params->default_top_high);
 		}
 		if (t_params->default_pll_gating_18)
-			config |= TDA9887_GATING_18;
+			tda_config |= TDA9887_GATING_18;
 		i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
 				    &tda9887_cfg);
 	}
@@ -813,7 +813,8 @@ static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf,
 	static struct tuner_params *t_params;
 	u8 config, cb;
 	u32 div;
-	int ret, frequency = params->frequency / 62500;
+	int ret;
+	unsigned frequency = params->frequency / 62500;
 
 	t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
 	ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c
index 5f99de0ad61..dcddfa803a7 100644
--- a/drivers/media/common/tuners/xc5000.c
+++ b/drivers/media/common/tuners/xc5000.c
@@ -2,7 +2,7 @@
  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
  *
  *  Copyright (c) 2007 Xceive Corporation
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h
index c910715addc..5389f740945 100644
--- a/drivers/media/common/tuners/xc5000.h
+++ b/drivers/media/common/tuners/xc5000.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h
index a72a9887fe7..b2a0074c99c 100644
--- a/drivers/media/common/tuners/xc5000_priv.h
+++ b/drivers/media/common/tuners/xc5000_priv.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index f9d087669d5..4eed783f4bc 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -137,7 +137,8 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un
 			flexcop_diseqc_send_byte(fe, 0xff);
 		else {
 			flexcop_set_tone(fe, SEC_TONE_ON);
-			udelay(12500);
+			mdelay(12);
+			udelay(500);
 			flexcop_set_tone(fe, SEC_TONE_OFF);
 		}
 		msleep(20);
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
index 55973eaf371..43a112ec6d4 100644
--- a/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -221,12 +221,12 @@ int flexcop_i2c_init(struct flexcop_device *fc)
 	fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
 	fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
 
-	strncpy(fc->fc_i2c_adap[0].i2c_adap.name,
-		"B2C2 FlexCop I2C to demod", I2C_NAME_SIZE);
-	strncpy(fc->fc_i2c_adap[1].i2c_adap.name,
-		"B2C2 FlexCop I2C to eeprom", I2C_NAME_SIZE);
-	strncpy(fc->fc_i2c_adap[2].i2c_adap.name,
-		"B2C2 FlexCop I2C to tuner", I2C_NAME_SIZE);
+	strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
+		sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
+	strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
+		sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
+	strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
+		sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
 
 	i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
 	i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index a7637562e74..aa3db57d32d 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1244,7 +1244,7 @@ static int dst_command(struct dst_state *state, u8 *data, u8 len)
 		goto error;
 	}
 	if (state->type_flags & DST_TYPE_HAS_FW_1)
-		udelay(3000);
+		mdelay(3);
 	if (read_dst(state, &reply, GET_ACK)) {
 		dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. ");
 		if ((dst_error_recovery(state)) < 0) {
@@ -1260,7 +1260,7 @@ static int dst_command(struct dst_state *state, u8 *data, u8 len)
 	if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3))
 		goto error;
 	if (state->type_flags & DST_TYPE_HAS_FW_1)
-		udelay(3000);
+		mdelay(3);
 	else
 		udelay(2000);
 	if (!dst_wait_dst_ready(state, NO_DELAY))
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 1cf9fcb6f51..069d847ba88 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -641,7 +641,6 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter)
 		struct timespec timeout = { 0 };
 		struct dmx_pes_filter_params *para = &filter->params.pes;
 		dmx_output_t otype;
-		int ret;
 		int ts_type;
 		enum dmx_ts_pes ts_pes;
 		struct dmx_ts_feed **tsfeed = &filter->feed.ts;
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index 8e5dd7b1f03..98ee16773ff 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -1032,7 +1032,7 @@ static int dvb_ca_en50221_thread(void *data)
 					/* we need this extra check for annoying interfaces like the budget-av */
 					if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
 					    (ca->pub->poll_slot_status)) {
-						int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+						status = ca->pub->poll_slot_status(ca->pub, slot, 0);
 						if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
 							ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
 							dvb_ca_en50221_thread_update_delay(ca);
@@ -1089,7 +1089,7 @@ static int dvb_ca_en50221_thread(void *data)
 					/* we need this extra check for annoying interfaces like the budget-av */
 					if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
 					    (ca->pub->poll_slot_status)) {
-						int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+						status = ca->pub->poll_slot_status(ca->pub, slot, 0);
 						if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
 							ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
 							dvb_ca_en50221_thread_update_delay(ca);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 8cbdb218952..3526e3ee948 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -889,13 +889,13 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
 			 * initialization, so parg is 8 bits and does not
 			 * include the initialization or start bit
 			 */
-			unsigned long cmd = ((unsigned long) parg) << 1;
+			unsigned long swcmd = ((unsigned long) parg) << 1;
 			struct timeval nexttime;
 			struct timeval tv[10];
 			int i;
 			u8 last = 1;
 			if (dvb_frontend_debug)
-				printk("%s switch command: 0x%04lx\n", __func__, cmd);
+				printk("%s switch command: 0x%04lx\n", __func__, swcmd);
 			do_gettimeofday(&nexttime);
 			if (dvb_frontend_debug)
 				memcpy(&tv[0], &nexttime, sizeof(struct timeval));
@@ -908,12 +908,12 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
 			for (i = 0; i < 9; i++) {
 				if (dvb_frontend_debug)
 					do_gettimeofday(&tv[i + 1]);
-				if ((cmd & 0x01) != last) {
+				if ((swcmd & 0x01) != last) {
 					/* set voltage to (last ? 13V : 18V) */
 					fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
 					last = (last) ? 0 : 1;
 				}
-				cmd = cmd >> 1;
+				swcmd = swcmd >> 1;
 				if (i != 8)
 					dvb_frontend_sleep_until(&nexttime, 8000);
 			}
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 578afce6884..563400277a4 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -210,7 +210,7 @@ static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff)
 	if (d->state == DVB_USB_STATE_INIT &&
 	    usb_set_interface(d->udev, 0, 0) < 0)
 		err("set interface failed");
-	do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
+	do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
 		   !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
 		   !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
 	if (!ret) {
@@ -565,7 +565,8 @@ static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
 
 static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg)
 {
-	struct dvb_usb_device *d = ptr;
+	struct dvb_usb_adapter *adap = ptr;
+	struct dvb_usb_device *d = adap->dev;
 
 	switch (command) {
 	case XC2028_TUNER_RESET:
@@ -593,9 +594,9 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap)
 		.callback  = dvico_bluebird_xc2028_callback,
 	};
 	static struct xc2028_ctrl ctl = {
-		.fname       = "xc3028-dvico-au-01.fw",
+		.fname       = "xc3028-v27.fw",
 		.max_len     = 64,
-		.scode_table = XC3028_FE_ZARLINK456,
+		.demod       = XC3028_FE_ZARLINK456,
 	};
 
 	fe = dvb_attach(xc2028_attach, adap->fe, &cfg);
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 3dd20bfbed3..6c0e5c5f436 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1117,7 +1117,8 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS) },
 	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1373,7 +1374,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			}
 		},
 
-		.num_device_descs = 3,
+		.num_device_descs = 4,
 		.devices = {
 			{   "DiBcom STK7070PD reference design",
 				{ &dib0700_usb_id_table[17], NULL },
@@ -1386,6 +1387,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "Hauppauge Nova-TD Stick (52009)",
 				{ &dib0700_usb_id_table[35], NULL },
 				{ NULL },
+			},
+			{   "Hauppauge Nova-TD-500 (84xxx)",
+				{ &dib0700_usb_id_table[36], NULL },
+				{ NULL },
 			}
 		}
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 029b437caf9..03dfb9f2fe3 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -129,6 +129,7 @@
 #define USB_PID_WINTV_NOVA_T_USB2_WARM			0x9301
 #define USB_PID_HAUPPAUGE_NOVA_T_500			0x9941
 #define USB_PID_HAUPPAUGE_NOVA_T_500_2			0x9950
+#define USB_PID_HAUPPAUGE_NOVA_T_500_3			0x8400
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK			0x7050
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_2		0x7060
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_3		0x7070
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 574dffe91b6..7dbb4a223c9 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -135,9 +135,8 @@ config DVB_CX22702
 
 config DVB_DRX397XD
 	tristate "Micronas DRX3975D/DRX3977D based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c
index f7b71657f0f..0b82cc2a1e1 100644
--- a/drivers/media/dvb/frontends/au8522.c
+++ b/drivers/media/dvb/frontends/au8522.c
@@ -1,7 +1,7 @@
 /*
     Auvitek AU8522 QAM/8VSB demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -304,6 +304,43 @@ static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse,
 	return ret;
 }
 
+static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq)
+{
+	struct au8522_state *state = fe->demodulator_priv;
+	u8 r0b5, r0b6, r0b7;
+	char *ifmhz;
+
+	switch (if_freq) {
+	case AU8522_IF_3_25MHZ:
+		ifmhz = "3.25";
+		r0b5 = 0x00;
+		r0b6 = 0x3d;
+		r0b7 = 0xa0;
+		break;
+	case AU8522_IF_4MHZ:
+		ifmhz = "4.00";
+		r0b5 = 0x00;
+		r0b6 = 0x4b;
+		r0b7 = 0xd9;
+		break;
+	case AU8522_IF_6MHZ:
+		ifmhz = "6.00";
+		r0b5 = 0xfb;
+		r0b6 = 0x8e;
+		r0b7 = 0x39;
+		break;
+	default:
+		dprintk("%s() IF Frequency not supported\n", __func__);
+		return -EINVAL;
+	}
+	dprintk("%s() %s MHz\n", __func__, ifmhz);
+	au8522_writereg(state, 0x80b5, r0b5);
+	au8522_writereg(state, 0x80b6, r0b6);
+	au8522_writereg(state, 0x80b7, r0b7);
+
+	return 0;
+}
+
 /* VSB Modulation table */
 static struct {
 	u16 reg;
@@ -334,9 +371,6 @@ static struct {
 	{ 0x80af, 0x66 },
 	{ 0x821b, 0xcc },
 	{ 0x821d, 0x80 },
-	{ 0x80b5, 0xfb },
-	{ 0x80b6, 0x8e },
-	{ 0x80b7, 0x39 },
 	{ 0x80a4, 0xe8 },
 	{ 0x8231, 0x13 },
 };
@@ -350,9 +384,6 @@ static struct {
 	{ 0x80a4, 0x00 },
 	{ 0x8081, 0xc4 },
 	{ 0x80a5, 0x40 },
-	{ 0x80b5, 0xfb },
-	{ 0x80b6, 0x8e },
-	{ 0x80b7, 0x39 },
 	{ 0x80aa, 0x77 },
 	{ 0x80ad, 0x77 },
 	{ 0x80a6, 0x67 },
@@ -438,6 +469,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 			au8522_writereg(state,
 				VSB_mod_tab[i].reg,
 				VSB_mod_tab[i].data);
+		au8522_set_if(fe, state->config->vsb_if);
 		break;
 	case QAM_64:
 	case QAM_256:
@@ -446,6 +478,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 			au8522_writereg(state,
 				QAM_mod_tab[i].reg,
 				QAM_mod_tab[i].data);
+		au8522_set_if(fe, state->config->qam_if);
 		break;
 	default:
 		dprintk("%s() Invalid modulation\n", __func__);
diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb/frontends/au8522.h
index d7affa3cdb2..595915ade8c 100644
--- a/drivers/media/dvb/frontends/au8522.h
+++ b/drivers/media/dvb/frontends/au8522.h
@@ -1,7 +1,7 @@
 /*
     Auvitek AU8522 QAM/8VSB demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -24,6 +24,12 @@
 
 #include <linux/dvb/frontend.h>
 
+enum au8522_if_freq {
+	AU8522_IF_6MHZ = 0,
+	AU8522_IF_4MHZ,
+	AU8522_IF_3_25MHZ,
+};
+
 struct au8522_config {
 	/* the demodulator's i2c address */
 	u8 demod_address;
@@ -32,6 +38,9 @@ struct au8522_config {
 #define AU8522_TUNERLOCKING 0
 #define AU8522_DEMODLOCKING 1
 	u8 status_mode;
+
+	enum au8522_if_freq vsb_if;
+	enum au8522_if_freq qam_if;
 };
 
 #if defined(CONFIG_DVB_AU8522) || 				\
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index cc1db4e371c..9430e03dba6 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -7,7 +7,7 @@
     Copyright (C) 2001-2002 Convergence Integrated Media GmbH
 	  Holger Waechtler <holger@convergence.de>
 
-    Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h
index 8af766a3155..b1e465c6c2c 100644
--- a/drivers/media/dvb/frontends/cx22702.h
+++ b/drivers/media/dvb/frontends/cx22702.h
@@ -7,7 +7,7 @@
     Copyright (C) 2001-2002 Convergence Integrated Media GmbH
 	  Holger Waechtler <holger@convergence.de>
 
-    Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index 7f68d78c655..7156157cb34 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -1,7 +1,7 @@
 /*
  *   Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
  *
- *   Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+ *   Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
  *
  *   Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc>
  *
@@ -1072,8 +1072,8 @@ struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
     if (config->dont_use_pll)
 	cx24123_repeater_mode(state, 1, 0);
 
-	strncpy(state->tuner_i2c_adapter.name,
-		"CX24123 tuner I2C bus", I2C_NAME_SIZE);
+	strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus",
+		sizeof(state->tuner_i2c_adapter.name));
 	state->tuner_i2c_adapter.class     = I2C_CLASS_TV_DIGITAL,
 	state->tuner_i2c_adapter.algo      = &cx24123_tuner_i2c_algo;
 	state->tuner_i2c_adapter.algo_data = NULL;
diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h
index 81ebc3d2f19..cc6b411d6d2 100644
--- a/drivers/media/dvb/frontends/cx24123.h
+++ b/drivers/media/dvb/frontends/cx24123.h
@@ -1,7 +1,7 @@
 /*
     Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
 
-    Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index 5ddb2dca305..7500a1c53e6 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -1,7 +1,7 @@
 /*
     Samsung S5H1409 VSB/QAM demodulator driver
 
-    Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -404,6 +404,7 @@ static int s5h1409_enable_modulation(struct dvb_frontend* fe,
 		break;
 	case QAM_64:
 	case QAM_256:
+	case QAM_AUTO:
 		dprintk("%s() QAM_AUTO (64/256)\n", __func__);
 		if (state->if_freq != S5H1409_QAM_IF_FREQ)
 			s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ);
diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h
index 59f4335964c..d1a1d2eb8e1 100644
--- a/drivers/media/dvb/frontends/s5h1409.h
+++ b/drivers/media/dvb/frontends/s5h1409.h
@@ -1,7 +1,7 @@
 /*
     Samsung S5H1409 VSB/QAM demodulator driver
 
-    Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c
index cff360ce1ba..2da1a3763de 100644
--- a/drivers/media/dvb/frontends/s5h1411.c
+++ b/drivers/media/dvb/frontends/s5h1411.c
@@ -1,7 +1,7 @@
 /*
     Samsung S5H1411 VSB/QAM demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -488,6 +488,7 @@ static int s5h1411_enable_modulation(struct dvb_frontend *fe,
 		break;
 	case QAM_64:
 	case QAM_256:
+	case QAM_AUTO:
 		dprintk("%s() QAM_AUTO (64/256)\n", __func__);
 		s5h1411_set_if_freq(fe, state->config->qam_if);
 		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x0171);
diff --git a/drivers/media/dvb/frontends/s5h1411.h b/drivers/media/dvb/frontends/s5h1411.h
index 1855f64ed4d..7d542bc00c4 100644
--- a/drivers/media/dvb/frontends/s5h1411.h
+++ b/drivers/media/dvb/frontends/s5h1411.h
@@ -1,7 +1,7 @@
 /*
     Samsung S5H1411 VSB/QAM demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index 720ed9ff7c5..747d3fa2e5e 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -915,7 +915,8 @@ struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config,
 	state->frontend.demodulator_priv = state;
 
 	/* create tuner i2c adapter */
-	strncpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus", I2C_NAME_SIZE);
+	strlcpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus",
+		sizeof(state->tuner_i2c_adapter.name));
 	state->tuner_i2c_adapter.class     = I2C_CLASS_TV_DIGITAL,
 	state->tuner_i2c_adapter.algo      = &s5h1420_tuner_i2c_algo;
 	state->tuner_i2c_adapter.algo_data = NULL;
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index 0ab8d86b3ae..04e7f1cc140 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -1,7 +1,7 @@
 /*
     NXP TDA10048HN DVB OFDM demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -303,7 +303,7 @@ static int tda10048_firmware_upload(struct dvb_frontend *fe)
 
 	if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) {
 		printk(KERN_ERR "%s: firmware incorrect size\n", __func__);
-		return -EIO;
+		ret = -EIO;
 	} else {
 		printk(KERN_INFO "%s: firmware uploading\n", __func__);
 
diff --git a/drivers/media/dvb/frontends/tda10048.h b/drivers/media/dvb/frontends/tda10048.h
index 2b5c78e62c8..0457b24601f 100644
--- a/drivers/media/dvb/frontends/tda10048.h
+++ b/drivers/media/dvb/frontends/tda10048.h
@@ -1,7 +1,7 @@
 /*
     NXP TDA10048HN DVB OFDM demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index e7a8ac0c404..cc5efb643f3 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -4,7 +4,7 @@
  *  Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/siano/sms-cards.h b/drivers/media/dvb/siano/sms-cards.h
index 83b39bc203f..c8f3da6f9bc 100644
--- a/drivers/media/dvb/siano/sms-cards.h
+++ b/drivers/media/dvb/siano/sms-cards.h
@@ -4,7 +4,7 @@
  *  Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index c5f45fed69d..6576fbb40fc 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -8,7 +8,7 @@
  *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h
index c1f8f1dccb1..8d973f726fb 100644
--- a/drivers/media/dvb/siano/smscoreapi.h
+++ b/drivers/media/dvb/siano/smscoreapi.h
@@ -6,7 +6,7 @@
  *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index 229274a1411..8d490e133f3 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -6,7 +6,7 @@
  *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index c10b1849c6a..87a3c24454b 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -6,7 +6,7 @@
  *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 39bd0a20f53..aa5ed4ef19f 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -116,7 +116,8 @@ static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long
 			DiseqcSendByte(budget, 0xff);
 		else {
 			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-			udelay(12500);
+			mdelay(12);
+			udelay(500);
 			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
 		}
 		msleep(20);
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 2293d80c6e5..f0068996ac0 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -108,7 +108,8 @@ static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long
 			DiseqcSendByte(budget, 0xff);
 		else {
 			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-			udelay(12500);
+			mdelay(12);
+			udelay(500);
 			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
 		}
 		msleep(20);
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index a30159f6fa4..7ca71ab96b4 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -2,8 +2,6 @@
 # Makefile for the kernel character device drivers.
 #
 
-miropcm20-objs	:= miropcm20-rds-core.o miropcm20-radio.o
-
 obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o
 obj-$(CONFIG_RADIO_RTRACK2) += radio-rtrack2.o
 obj-$(CONFIG_RADIO_SF16FMI) += radio-sf16fmi.o
@@ -14,8 +12,6 @@ obj-$(CONFIG_RADIO_TERRATEC) += radio-terratec.o
 obj-$(CONFIG_RADIO_MAXIRADIO) += radio-maxiradio.o
 obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o
 obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o
-obj-$(CONFIG_RADIO_MIROPCM20) += miropcm20.o
-obj-$(CONFIG_RADIO_MIROPCM20_RDS) += miropcm20-rds.o
 obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
 obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
 obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 1ed88f3abe6..70c65a74592 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -493,7 +493,7 @@ static int usb_dsbr100_probe(struct usb_interface *intf,
 	radio->usbdev = interface_to_usbdev(intf);
 	radio->curfreq = FREQ_MIN*FREQ_MUL;
 	video_set_drvdata(radio->videodev, radio);
-	if (video_register_device(radio->videodev, VFL_TYPE_RADIO,radio_nr)) {
+	if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		warn("Could not register video device");
 		video_device_release(radio->videodev);
 		kfree(radio->transfer_buffer);
diff --git a/drivers/media/radio/miropcm20-radio.c b/drivers/media/radio/miropcm20-radio.c
deleted file mode 100644
index 7fd7ee2d32c..00000000000
--- a/drivers/media/radio/miropcm20-radio.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/* Miro PCM20 radio driver for Linux radio support
- * (c) 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
- * Thanks to Norberto Pellici for the ACI device interface specification
- * The API part is based on the radiotrack driver by M. Kirkwood
- * This driver relies on the aci mixer (drivers/sound/aci.c)
- * Look there for further info...
- */
-
-/* Revision history:
- *
- *   1998        Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
- *   2000-09-05  Robert Siemer <Robert.Siemer@gmx.de>
- *        removed unfinished volume control (maybe adding it later again)
- *        use OSS-mixer; added stereo control
- */
-
-/* What ever you think about the ACI, version 0x07 is not very well!
- * I can't get frequency, 'tuner status', 'tuner flags' or mute/mono
- * conditions...                Robert
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include "oss/aci.h"
-#include "miropcm20-rds-core.h"
-
-static int radio_nr = -1;
-module_param(radio_nr, int, 0);
-
-struct pcm20_device {
-	unsigned long freq;
-	int muted;
-	int stereo;
-};
-
-
-static int pcm20_mute(struct pcm20_device *dev, unsigned char mute)
-{
-	dev->muted = mute;
-	return aci_write_cmd(ACI_SET_TUNERMUTE, mute);
-}
-
-static int pcm20_stereo(struct pcm20_device *dev, unsigned char stereo)
-{
-	dev->stereo = stereo;
-	return aci_write_cmd(ACI_SET_TUNERMONO, !stereo);
-}
-
-static int pcm20_setfreq(struct pcm20_device *dev, unsigned long freq)
-{
-	unsigned char freql;
-	unsigned char freqh;
-
-	dev->freq=freq;
-
-	freq /= 160;
-	if (!(aci_version==0x07 || aci_version>=0xb0))
-		freq /= 10;  /* I don't know exactly which version
-			      * needs this hack */
-	freql = freq & 0xff;
-	freqh = freq >> 8;
-
-	aci_rds_cmd(RDS_RESET, NULL, 0);
-	pcm20_stereo(dev, 1);
-
-	return aci_rw_cmd(ACI_WRITE_TUNE, freql, freqh);
-}
-
-static int pcm20_getflags(struct pcm20_device *dev, __u32 *flags, __u16 *signal)
-{
-	/* okay, check for signal, stereo and rds here... */
-	int i;
-	unsigned char buf;
-
-	if ((i=aci_rw_cmd(ACI_READ_TUNERSTATION, -1, -1))<0)
-		return i;
-	pr_debug("check_sig: 0x%x\n", i);
-	if (i & 0x80) {
-		/* no signal from tuner */
-		*flags=0;
-		*signal=0;
-		return 0;
-	} else
-		*signal=0xffff;
-
-	if ((i=aci_rw_cmd(ACI_READ_TUNERSTEREO, -1, -1))<0)
-		return i;
-	if (i & 0x40) {
-		*flags=0;
-	} else {
-		/* stereo */
-		*flags=VIDEO_TUNER_STEREO_ON;
-		/* I can't see stereo, when forced to mono */
-		dev->stereo=1;
-	}
-
-	if ((i=aci_rds_cmd(RDS_STATUS, &buf, 1))<0)
-		return i;
-	if (buf & 1)
-		/* RDS available */
-		*flags|=VIDEO_TUNER_RDS_ON;
-	else
-		return 0;
-
-	if ((i=aci_rds_cmd(RDS_RXVALUE, &buf, 1))<0)
-		return i;
-	pr_debug("rds-signal: %d\n", buf);
-	if (buf > 15) {
-		printk("miropcm20-radio: RX strengths unexpected high...\n");
-		buf=15;
-	}
-	/* refine signal */
-	if ((*signal=SCALE(15, 0xffff, buf))==0)
-		*signal = 1;
-
-	return 0;
-}
-
-static int pcm20_do_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, void *arg)
-{
-	struct video_device *dev = video_devdata(file);
-	struct pcm20_device *pcm20 = dev->priv;
-	int i;
-
-	switch(cmd)
-	{
-		case VIDIOCGCAP:
-		{
-			struct video_capability *v = arg;
-			memset(v,0,sizeof(*v));
-			v->type=VID_TYPE_TUNER;
-			strcpy(v->name, "Miro PCM20");
-			v->channels=1;
-			v->audios=1;
-			return 0;
-		}
-		case VIDIOCGTUNER:
-		{
-			struct video_tuner *v = arg;
-			if(v->tuner)	/* Only 1 tuner */
-				return -EINVAL;
-			v->rangelow=87*16000;
-			v->rangehigh=108*16000;
-			pcm20_getflags(pcm20, &v->flags, &v->signal);
-			v->flags|=VIDEO_TUNER_LOW;
-			v->mode=VIDEO_MODE_AUTO;
-			strcpy(v->name, "FM");
-			return 0;
-		}
-		case VIDIOCSTUNER:
-		{
-			struct video_tuner *v = arg;
-			if(v->tuner!=0)
-				return -EINVAL;
-			/* Only 1 tuner so no setting needed ! */
-			return 0;
-		}
-		case VIDIOCGFREQ:
-		{
-			unsigned long *freq = arg;
-			*freq = pcm20->freq;
-			return 0;
-		}
-		case VIDIOCSFREQ:
-		{
-			unsigned long *freq = arg;
-			pcm20->freq = *freq;
-			i=pcm20_setfreq(pcm20, pcm20->freq);
-			pr_debug("First view (setfreq): 0x%x\n", i);
-			return i;
-		}
-		case VIDIOCGAUDIO:
-		{
-			struct video_audio *v = arg;
-			memset(v,0, sizeof(*v));
-			v->flags=VIDEO_AUDIO_MUTABLE;
-			if (pcm20->muted)
-				v->flags|=VIDEO_AUDIO_MUTE;
-			v->mode=VIDEO_SOUND_STEREO;
-			if (pcm20->stereo)
-				v->mode|=VIDEO_SOUND_MONO;
-			/* v->step=2048; */
-			strcpy(v->name, "Radio");
-			return 0;
-		}
-		case VIDIOCSAUDIO:
-		{
-			struct video_audio *v = arg;
-			if(v->audio)
-				return -EINVAL;
-
-			pcm20_mute(pcm20, !!(v->flags&VIDEO_AUDIO_MUTE));
-			if(v->flags&VIDEO_SOUND_MONO)
-				pcm20_stereo(pcm20, 0);
-			if(v->flags&VIDEO_SOUND_STEREO)
-				pcm20_stereo(pcm20, 1);
-
-			return 0;
-		}
-		default:
-			return -ENOIOCTLCMD;
-	}
-}
-
-static int pcm20_ioctl(struct inode *inode, struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(inode, file, cmd, arg, pcm20_do_ioctl);
-}
-
-static struct pcm20_device pcm20_unit = {
-	.freq   = 87*16000,
-	.muted  = 1,
-};
-
-static const struct file_operations pcm20_fops = {
-	.owner		= THIS_MODULE,
-	.open           = video_exclusive_open,
-	.release        = video_exclusive_release,
-	.ioctl		= pcm20_ioctl,
-#ifdef CONFIG_COMPAT
-	.compat_ioctl	= v4l_compat_ioctl32,
-#endif
-	.llseek         = no_llseek,
-};
-
-static struct video_device pcm20_radio = {
-	.name		= "Miro PCM 20 radio",
-	.fops           = &pcm20_fops,
-	.priv		= &pcm20_unit
-};
-
-static int __init pcm20_init(void)
-{
-	if(video_register_device(&pcm20_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-		goto video_register_device;
-
-	if(attach_aci_rds()<0)
-		goto attach_aci_rds;
-
-	printk(KERN_INFO "Miro PCM20 radio card driver.\n");
-
-	return 0;
-
- attach_aci_rds:
-	video_unregister_device(&pcm20_radio);
- video_register_device:
-	return -EINVAL;
-}
-
-MODULE_AUTHOR("Ruurd Reitsma");
-MODULE_DESCRIPTION("A driver for the Miro PCM20 radio card.");
-MODULE_LICENSE("GPL");
-
-static void __exit pcm20_cleanup(void)
-{
-	unload_aci_rds();
-	video_unregister_device(&pcm20_radio);
-}
-
-module_init(pcm20_init);
-module_exit(pcm20_cleanup);
diff --git a/drivers/media/radio/miropcm20-rds-core.c b/drivers/media/radio/miropcm20-rds-core.c
deleted file mode 100644
index 9428d8b2642..00000000000
--- a/drivers/media/radio/miropcm20-rds-core.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- *  Many thanks to Fred Seidel <seidel@metabox.de>, the
- *  designer of the RDS decoder hardware. With his help
- *  I was able to code this driver.
- *  Thanks also to Norberto Pellicci, Dominic Mounteney
- *  <DMounteney@pinnaclesys.com> and www.teleauskunft.de
- *  for good hints on finding Fred. It was somewhat hard
- *  to locate him here in Germany... [:
- *
- * Revision history:
- *
- *   2000-08-09  Robert Siemer <Robert.Siemer@gmx.de>
- *        RDS support for MiroSound PCM20 radio
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-
-#include <asm/io.h>
-#include "oss/aci.h"
-#include "miropcm20-rds-core.h"
-
-#define DEBUG 0
-
-static struct mutex aci_rds_mutex;
-
-#define RDS_DATASHIFT          2   /* Bit 2 */
-#define RDS_DATAMASK        (1 << RDS_DATASHIFT)
-#define RDS_BUSYMASK        0x10   /* Bit 4 */
-#define RDS_CLOCKMASK       0x08   /* Bit 3 */
-
-#define RDS_DATA(x)         (((x) >> RDS_DATASHIFT) & 1)
-
-
-#if DEBUG
-static void print_matrix(char array[], unsigned int length)
-{
-	int i, j;
-
-	for (i=0; i<length; i++) {
-		printk(KERN_DEBUG "aci-rds: ");
-		for (j=7; j>=0; j--) {
-			printk("%d", (array[i] >> j) & 0x1);
-		}
-		if (i%8 == 0)
-			printk(" byte-border\n");
-		else
-			printk("\n");
-	}
-}
-#endif /* DEBUG */
-
-static int byte2trans(unsigned char byte, unsigned char sendbuffer[], int size)
-{
-	int i;
-
-	if (size != 8)
-		return -1;
-	for (i = 7; i >= 0; i--)
-		sendbuffer[7-i] = (byte & (1 << i)) ? RDS_DATAMASK : 0;
-	sendbuffer[0] |= RDS_CLOCKMASK;
-
-	return 0;
-}
-
-static int rds_waitread(void)
-{
-	unsigned char byte;
-	int i=2000;
-
-	do {
-		byte=inb(RDS_REGISTER);
-		i--;
-	}
-	while ((byte & RDS_BUSYMASK) && i);
-
-	if (i) {
-		#if DEBUG
-		printk(KERN_DEBUG "rds_waitread()");
-		print_matrix(&byte, 1);
-		#endif
-		return (byte);
-	} else {
-		printk(KERN_WARNING "aci-rds: rds_waitread() timeout...\n");
-		return -1;
-	}
-}
-
-/* don't use any ..._nowait() function if you are not sure what you do... */
-
-static inline void rds_rawwrite_nowait(unsigned char byte)
-{
-	#if DEBUG
-	printk(KERN_DEBUG "rds_rawwrite()");
-	print_matrix(&byte, 1);
-	#endif
-	outb(byte, RDS_REGISTER);
-}
-
-static int rds_rawwrite(unsigned char byte)
-{
-	if (rds_waitread() >= 0) {
-		rds_rawwrite_nowait(byte);
-		return 0;
-	} else
-		return -1;
-}
-
-static int rds_write(unsigned char cmd)
-{
-	unsigned char sendbuffer[8];
-	int i;
-
-	if (byte2trans(cmd, sendbuffer, 8) != 0){
-		return -1;
-	} else {
-		for (i=0; i<8; i++) {
-			rds_rawwrite(sendbuffer[i]);
-		}
-	}
-	return 0;
-}
-
-static int rds_readcycle_nowait(void)
-{
-	rds_rawwrite_nowait(0);
-	return rds_waitread();
-}
-
-static int rds_readcycle(void)
-{
-	if (rds_rawwrite(0) < 0)
-		return -1;
-	return rds_waitread();
-}
-
-static int rds_read(unsigned char databuffer[], int datasize)
-{
-	#define READSIZE (8*datasize)
-
-	int i,j;
-
-	if (datasize < 1)  /* nothing to read */
-		return 0;
-
-	/* to be able to use rds_readcycle_nowait()
-	   I have to waitread() here */
-	if (rds_waitread() < 0)
-		return -1;
-
-	memset(databuffer, 0, datasize);
-
-	for (i=0; i< READSIZE; i++)
-		if((j=rds_readcycle_nowait()) < 0) {
-			return -1;
-		} else {
-			databuffer[i/8]|=(RDS_DATA(j) << (7-(i%8)));
-		}
-
-	return 0;
-}
-
-static int rds_ack(void)
-{
-	int i=rds_readcycle();
-
-	if (i < 0)
-		return -1;
-	if (i & RDS_DATAMASK) {
-		return 0;  /* ACK  */
-	} else {
-		printk(KERN_DEBUG "aci-rds: NACK\n");
-		return 1;  /* NACK */
-	}
-}
-
-int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize)
-{
-	int ret;
-
-	if (mutex_lock_interruptible(&aci_rds_mutex))
-		return -EINTR;
-
-	rds_write(cmd);
-
-	/* RDS_RESET doesn't need further processing */
-	if (cmd!=RDS_RESET && (rds_ack() || rds_read(databuffer, datasize)))
-		ret = -1;
-	else
-		ret = 0;
-
-	mutex_unlock(&aci_rds_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(aci_rds_cmd);
-
-int __init attach_aci_rds(void)
-{
-	mutex_init(&aci_rds_mutex);
-	return 0;
-}
-
-void __exit unload_aci_rds(void)
-{
-}
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/radio/miropcm20-rds-core.h b/drivers/media/radio/miropcm20-rds-core.h
deleted file mode 100644
index aeb5761f046..00000000000
--- a/drivers/media/radio/miropcm20-rds-core.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _MIROPCM20_RDS_CORE_H_
-#define _MIROPCM20_RDS_CORE_H_
-
-extern int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize);
-
-#define RDS_STATUS      0x01
-#define RDS_STATIONNAME 0x02
-#define RDS_TEXT        0x03
-#define RDS_ALTFREQ     0x04
-#define RDS_TIMEDATE    0x05
-#define RDS_PI_CODE     0x06
-#define RDS_PTYTATP     0x07
-#define RDS_RESET       0x08
-#define RDS_RXVALUE     0x09
-
-extern void __exit unload_aci_rds(void);
-extern int __init attach_aci_rds(void);
-
-#endif /* _MIROPCM20_RDS_CORE_H_ */
diff --git a/drivers/media/radio/miropcm20-rds.c b/drivers/media/radio/miropcm20-rds.c
deleted file mode 100644
index 3e840f74d45..00000000000
--- a/drivers/media/radio/miropcm20-rds.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* MiroSOUND PCM20 radio rds interface driver
- * (c) 2001 Robert Siemer <Robert.Siemer@gmx.de>
- * Thanks to Fred Seidel. See miropcm20-rds-core.c for further information.
- */
-
-/* Revision history:
- *
- *   2001-04-18  Robert Siemer <Robert.Siemer@gmx.de>
- *        separate file for user interface driver
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include "miropcm20-rds-core.h"
-
-static char * text_buffer;
-static int rds_users;
-
-
-static int rds_f_open(struct inode *in, struct file *fi)
-{
-	if (rds_users)
-		return -EBUSY;
-
-	lock_kernel();
-	rds_users++;
-	if ((text_buffer=kmalloc(66, GFP_KERNEL)) == 0) {
-		rds_users--;
-		printk(KERN_NOTICE "aci-rds: Out of memory by open()...\n");
-		unlock_kernel();
-		return -ENOMEM;
-	}
-
-	unlock_kernel();
-	return 0;
-}
-
-static int rds_f_release(struct inode *in, struct file *fi)
-{
-	kfree(text_buffer);
-
-	rds_users--;
-	return 0;
-}
-
-static void print_matrix(char *ch, char out[])
-{
-	int j;
-
-	for (j=7; j>=0; j--) {
-		 out[7-j] = ((*ch >> j) & 0x1) + '0';
-	}
-}
-
-static ssize_t rds_f_read(struct file *file, char __user *buffer, size_t length, loff_t *offset)
-{
-//	i = sprintf(text_buffer, "length: %d, offset: %d\n", length, *offset);
-
-	char c;
-	char bits[8];
-
-	msleep(2000);
-	aci_rds_cmd(RDS_STATUS, &c, 1);
-	print_matrix(&c, bits);
-	if (copy_to_user(buffer, bits, 8))
-		return -EFAULT;
-
-/*	if ((c >> 3) & 1) {
-		aci_rds_cmd(RDS_STATIONNAME, text_buffer+1, 8);
-		text_buffer[0]  = ' ' ;
-		text_buffer[9]  = '\n';
-		return copy_to_user(buffer+8, text_buffer, 10) ? -EFAULT: 18;
-	}
-*/
-/*	if ((c >> 6) & 1) {
-		aci_rds_cmd(RDS_PTYTATP, &c, 1);
-		if ( c & 1)
-			sprintf(text_buffer, " M");
-		else
-			sprintf(text_buffer, " S");
-		if ((c >> 1) & 1)
-			sprintf(text_buffer+2, " TA");
-		else
-			sprintf(text_buffer+2, " --");
-		if ((c >> 7) & 1)
-			sprintf(text_buffer+5, " TP");
-		else
-			sprintf(text_buffer+5, " --");
-		sprintf(text_buffer+8, " %2d\n", (c >> 2) & 0x1f);
-		return copy_to_user(buffer+8, text_buffer, 12) ? -EFAULT: 20;
-	}
-*/
-
-	if ((c >> 4) & 1) {
-		aci_rds_cmd(RDS_TEXT, text_buffer, 65);
-		text_buffer[0]  = ' ' ;
-		text_buffer[65] = '\n';
-		return copy_to_user(buffer+8, text_buffer,66) ? -EFAULT : 66+8;
-	} else {
-		put_user('\n', buffer+8);
-		return 9;
-	}
-}
-
-static const struct file_operations rds_fops = {
-	.owner		= THIS_MODULE,
-	.read		= rds_f_read,
-	.open		= rds_f_open,
-	.release	= rds_f_release
-};
-
-static struct miscdevice rds_miscdev = {
-	.minor		= MISC_DYNAMIC_MINOR,
-	.name		= "radiotext",
-	.fops		= &rds_fops,
-};
-
-static int __init miropcm20_rds_init(void)
-{
-	return misc_register(&rds_miscdev);
-}
-
-static void __exit miropcm20_rds_cleanup(void)
-{
-	misc_deregister(&rds_miscdev);
-}
-
-module_init(miropcm20_rds_init);
-module_exit(miropcm20_rds_cleanup);
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index eba9209b302..1f064f4b32d 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -426,8 +426,7 @@ static int __init rtrack_init(void)
 
 	rtrack_radio.priv=&rtrack_unit;
 
-	if(video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-	{
+	if (video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
index 3fe5504428c..628c689e3ff 100644
--- a/drivers/media/radio/radio-aztech.c
+++ b/drivers/media/radio/radio-aztech.c
@@ -394,8 +394,7 @@ static int __init aztech_init(void)
 	mutex_init(&lock);
 	aztech_radio.priv=&aztech_unit;
 
-	if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-	{
+	if (video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io,2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index 6166e726ed7..04c3698d32e 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -682,7 +682,7 @@ static int __init cadet_init(void)
 	}
 	if (!request_region(io,2,"cadet"))
 		goto fail;
-	if(video_register_device(&cadet_radio,VFL_TYPE_RADIO,radio_nr)==-1) {
+	if (video_register_device(&cadet_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io,2);
 		goto fail;
 	}
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index 36e754e3ffb..5cd7f032298 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -425,7 +425,7 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci
 	}
 	*devradio = vdev_template;
 
-	if ( video_register_device( devradio, VFL_TYPE_RADIO , nr_radio) == -1 ) {
+	if (video_register_device(devradio, VFL_TYPE_RADIO, nr_radio) < 0) {
 		kfree( devradio );
 		goto err_video;
 	}
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index 2b1a6221de6..0a0f956bb30 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -612,8 +612,7 @@ static int __init gemtek_init(void)
 
 	gemtek_radio.priv = &gemtek_unit;
 
-	if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO,
-		radio_nr) == -1) {
+	if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 1);
 		return -EBUSY;
 	}
diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c
index 0ada1c697e8..9ef0a763eeb 100644
--- a/drivers/media/radio/radio-maestro.c
+++ b/drivers/media/radio/radio-maestro.c
@@ -409,8 +409,7 @@ static int __devinit maestro_probe(struct pci_dev *pdev,
 	video_set_drvdata(maestro_radio_inst, radio_unit);
 	pci_set_drvdata(pdev, maestro_radio_inst);
 
-	retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO,
-		radio_nr);
+	retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO, radio_nr);
 	if (retval) {
 		printk(KERN_ERR "can't register video device!\n");
 		goto errfr1;
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 43c75497dc4..0cc6fcb041f 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -156,28 +156,28 @@ static void set_freq(__u16 io, __u32 freq)
 {
 	unsigned long int si;
 	int bl;
-	int data = FREQ2BITS(freq);
+	int val = FREQ2BITS(freq);
 
 	/* TEA5757 shift register bits (see pdf) */
 
-	outbit(0,io); // 24  search
-	outbit(1,io); // 23  search up/down
+	outbit(0, io); /* 24  search */
+	outbit(1, io); /* 23  search up/down */
 
-	outbit(0,io); // 22  stereo/mono
+	outbit(0, io); /* 22  stereo/mono */
 
-	outbit(0,io); // 21  band
-	outbit(0,io); // 20  band (only 00=FM works I think)
+	outbit(0, io); /* 21  band */
+	outbit(0, io); /* 20  band (only 00=FM works I think) */
 
-	outbit(0,io); // 19  port ?
-	outbit(0,io); // 18  port ?
+	outbit(0, io); /* 19  port ? */
+	outbit(0, io); /* 18  port ? */
 
-	outbit(0,io); // 17  search level
-	outbit(0,io); // 16  search level
+	outbit(0, io); /* 17  search level */
+	outbit(0, io); /* 16  search level */
 
 	si = 0x8000;
-	for (bl = 1; bl <= 16 ; bl++) {
-		outbit(data & si,io);
-		si >>=1;
+	for (bl = 1; bl <= 16; bl++) {
+		outbit(val & si, io);
+		si >>= 1;
 	}
 
 	dprintk(1, "Radio freq set to %d.%02d MHz\n",
@@ -410,7 +410,7 @@ static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_d
 	mutex_init(&radio_unit.lock);
 	maxiradio_radio.priv = &radio_unit;
 
-	if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr)==-1) {
+	if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		printk("radio-maxiradio: can't register device!");
 		goto err_out_free_region;
 	}
diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c
index e2dde080726..6d820e2481e 100644
--- a/drivers/media/radio/radio-rtrack2.c
+++ b/drivers/media/radio/radio-rtrack2.c
@@ -332,8 +332,7 @@ static int __init rtrack2_init(void)
 	rtrack2_radio.priv=&rtrack2_unit;
 
 	spin_lock_init(&lock);
-	if(video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-	{
+	if (video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 4);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index bb5d92f104a..0d478f54a90 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -377,7 +377,7 @@ static int __init fmi_init(void)
 
 	mutex_init(&lock);
 
-	if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) == -1) {
+	if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index a4984ff87c9..16c7ef20265 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -1694,8 +1694,8 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 	INIT_DELAYED_WORK(&radio->work, si470x_work);
 
 	/* register video device */
-	if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) {
-		retval = -EIO;
+	retval = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+	if (retval) {
 		printk(KERN_WARNING DRIVER_NAME
 				": Could not register video device\n");
 		goto err_all;
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
index cefa44fc5ae..0876fecc5f2 100644
--- a/drivers/media/radio/radio-terratec.c
+++ b/drivers/media/radio/radio-terratec.c
@@ -405,8 +405,7 @@ static int __init terratec_init(void)
 
 	spin_lock_init(&lock);
 
-	if(video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-	{
+	if (video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io,2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c
index d70172d23ed..19316195625 100644
--- a/drivers/media/radio/radio-trust.c
+++ b/drivers/media/radio/radio-trust.c
@@ -378,8 +378,7 @@ static int __init trust_init(void)
 		printk(KERN_ERR "trust: port 0x%x already in use\n", io);
 		return -EBUSY;
 	}
-	if(video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-	{
+	if (video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
index 9f17a332fa1..51d57ed3b3e 100644
--- a/drivers/media/radio/radio-zoltrix.c
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -446,8 +446,7 @@ static int __init zoltrix_init(void)
 		return -EBUSY;
 	}
 
-	if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) == -1)
-	{
+	if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index d4a6e56a713..3e9e0dcd217 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -630,7 +630,7 @@ config VIDEO_ZORAN_ZR36060
 	depends on VIDEO_ZORAN
 	help
 	  Say Y to support Zoran boards based on 36060 chips.
-	  This includes Iomega Bus, Pinnacle DC10, Linux media Labs 33
+	  This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33
 	  and 33 R10 and AverMedia 6 boards.
 
 config VIDEO_ZORAN_BUZ
@@ -968,7 +968,7 @@ config VIDEO_PXA27x
 
 config VIDEO_SH_MOBILE_CEU
 	tristate "SuperH Mobile CEU Interface driver"
-	depends on VIDEO_DEV
+	depends on VIDEO_DEV && HAS_DMA
 	select SOC_CAMERA
 	select VIDEOBUF_DMA_CONTIG
 	---help---
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index bbc6f8b8229..ef7c8d3ffb1 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -20,6 +20,8 @@ ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
   obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
 endif
 
+obj-$(CONFIG_VIDEO_TUNER) += tuner.o
+
 obj-$(CONFIG_VIDEO_BT848) += bt8xx/
 obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
 obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
@@ -85,8 +87,6 @@ obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
 obj-$(CONFIG_VIDEO_DPC) += dpc7146.o
 obj-$(CONFIG_TUNER_3036) += tuner-3036.o
 
-obj-$(CONFIG_VIDEO_TUNER) += tuner.o
-
 obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
 obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
 obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index 56ebfd5ef6f..9e436ad3d34 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -29,6 +29,7 @@
 #include <linux/sched.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 #include <asm/uaccess.h>
@@ -755,7 +756,6 @@ static const struct file_operations ar_fops = {
 
 static struct video_device ar_template = {
 	.name		= "Colour AR VGA",
-	.type		= VID_TYPE_CAPTURE,
 	.fops		= &ar_fops,
 	.release	= ar_release,
 	.minor		= -1,
diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig
index ed9a50f189f..018f72b8e3e 100644
--- a/drivers/media/video/au0828/Kconfig
+++ b/drivers/media/video/au0828/Kconfig
@@ -7,6 +7,7 @@ config VIDEO_AU0828
 	select DVB_AU8522 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
+	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
 	---help---
 	  This is a video4linux driver for Auvitek's USB device.
 
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 443e5900976..ed48908a903 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -38,6 +38,9 @@ struct au0828_board au0828_boards[] = {
 	[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
 		.name	= "DViCO FusionHDTV USB",
 	},
+	[AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
+		.name = "Hauppauge Woodbury",
+	},
 };
 
 /* Tuner callback function for au0828 boards. Currently only needed
@@ -115,6 +118,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 		if (dev->i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xa0);
 		break;
@@ -134,6 +138,7 @@ void au0828_gpio_setup(struct au0828_dev *dev)
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 		/* GPIO's
 		 * 4 - CS5340
 		 * 5 - AU8522 Demodulator
@@ -205,6 +210,8 @@ struct usb_device_id au0828_usb_id_table [] = {
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 	{ USB_DEVICE(0x2040, 0x7281),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x2040, 0x8200),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 	{ },
 };
 
diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h
index c37f5fd0fa8..48a1882c2b6 100644
--- a/drivers/media/video/au0828/au0828-cards.h
+++ b/drivers/media/video/au0828/au0828-cards.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -24,3 +24,4 @@
 #define AU0828_BOARD_HAUPPAUGE_HVR850 	2
 #define AU0828_BOARD_DVICO_FUSIONHDTV7	3
 #define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL	4
+#define AU0828_BOARD_HAUPPAUGE_WOODBURY	5
diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c
index 54bfc0f0529..d856de9f742 100644
--- a/drivers/media/video/au0828/au0828-core.c
+++ b/drivers/media/video/au0828/au0828-core.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -252,5 +252,5 @@ module_init(au0828_init);
 module_exit(au0828_exit);
 
 MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index 584a83a94a2..ba94be7e0ac 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -29,6 +29,7 @@
 #include "au8522.h"
 #include "xc5000.h"
 #include "mxl5007t.h"
+#include "tda18271.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
@@ -38,6 +39,15 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 static struct au8522_config hauppauge_hvr950q_config = {
 	.demod_address = 0x8e >> 1,
 	.status_mode   = AU8522_DEMODLOCKING,
+	.qam_if        = AU8522_IF_6MHZ,
+	.vsb_if        = AU8522_IF_6MHZ,
+};
+
+static struct au8522_config hauppauge_woodbury_config = {
+	.demod_address = 0x8e >> 1,
+	.status_mode   = AU8522_DEMODLOCKING,
+	.qam_if        = AU8522_IF_4MHZ,
+	.vsb_if        = AU8522_IF_3_25MHZ,
 };
 
 static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
@@ -51,6 +61,10 @@ static struct mxl5007t_config mxl5007t_hvr950q_config = {
 	.if_freq_hz = MxL_IF_6_MHZ,
 };
 
+static struct tda18271_config hauppauge_woodbury_tunerconfig = {
+	.gate    = TDA18271_GATE_DIGITAL,
+};
+
 /*-------------------------------------------------------------------*/
 static void urb_completion(struct urb *purb)
 {
@@ -357,6 +371,15 @@ int au0828_dvb_register(struct au0828_dev *dev)
 				   &dev->i2c_adap, 0x60,
 				   &mxl5007t_hvr950q_config);
 		break;
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
+		dvb->frontend = dvb_attach(au8522_attach,
+				&hauppauge_woodbury_config,
+				&dev->i2c_adap);
+		if (dvb->frontend != NULL)
+			dvb_attach(tda18271_attach, dvb->frontend,
+				   0x60, &dev->i2c_adap,
+				   &hauppauge_woodbury_tunerconfig);
+		break;
 	default:
 		printk(KERN_WARNING "The frontend of your DVB/ATSC card "
 		       "isn't supported yet\n");
diff --git a/drivers/media/video/au0828/au0828-i2c.c b/drivers/media/video/au0828/au0828-i2c.c
index 741a4937b05..d618fbaade1 100644
--- a/drivers/media/video/au0828/au0828-i2c.c
+++ b/drivers/media/video/au0828/au0828-i2c.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek AU0828 USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/au0828/au0828-reg.h b/drivers/media/video/au0828/au0828-reg.h
index 39827550891..1e87fa0c684 100644
--- a/drivers/media/video/au0828/au0828-reg.h
+++ b/drivers/media/video/au0828/au0828-reg.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h
index 7beb571798e..4f10ff30013 100644
--- a/drivers/media/video/au0828/au0828.h
+++ b/drivers/media/video/au0828/au0828.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek AU0828 USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 1c56ae92ce7..6081edc362d 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -3144,8 +3144,9 @@ static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
 
 static void flyvideo_gpio(struct bttv *btv)
 {
-	int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
-	int tuner=UNSET,ttype;
+	int gpio, has_remote, has_radio, is_capture_only;
+	int is_lr90, has_tda9820_tda9821;
+	int tuner_type = UNSET, ttype;
 
 	gpio_inout(0xffffff, 0);
 	udelay(8);  /* without this we would see the 0x1800 mask */
@@ -3163,20 +3164,26 @@ static void flyvideo_gpio(struct bttv *btv)
 	 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
 	 * Note: Some bits are Audio_Mask !
 	 */
-	ttype=(gpio&0x0f0000)>>16;
-	switch(ttype) {
-	case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
+	ttype = (gpio & 0x0f0000) >> 16;
+	switch (ttype) {
+	case 0x0:
+		tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
 		break;
-	case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
+	case 0x2:
+		tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
 		break;
-	case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
+	case 0x4:
+		tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
 		break;
-	case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
+	case 0x6:
+		tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
 		break;
-		case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
+	case 0xC:
+		tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
 		break;
 	default:
 		printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
+		break;
 	}
 
 	has_remote          =   gpio & 0x800000;
@@ -3189,23 +3196,26 @@ static void flyvideo_gpio(struct bttv *btv)
 	/*
 	 * gpio & 0x001000    output bit for audio routing */
 
-	if(is_capture_only)
-		tuner = TUNER_ABSENT; /* No tuner present */
+	if (is_capture_only)
+		tuner_type = TUNER_ABSENT; /* No tuner present */
 
 	printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
-	       btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
+		btv->c.nr, has_radio ? "yes" : "no ",
+		has_remote ? "yes" : "no ", tuner_type, gpio);
 	printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
-		btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
-		is_capture_only?"yes":"no ");
+		btv->c.nr, is_lr90 ? "yes" : "no ",
+		has_tda9820_tda9821 ? "yes" : "no ",
+		is_capture_only ? "yes" : "no ");
 
-	if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */
-		btv->tuner_type = tuner;
+	if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
+		btv->tuner_type = tuner_type;
 	btv->has_radio = has_radio;
 
 	/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
 	 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
 	 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
-	if(has_tda9820_tda9821) btv->audio_mode_gpio = lt9415_audio;
+	if (has_tda9820_tda9821)
+		btv->audio_mode_gpio = lt9415_audio;
 	/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
 }
 
@@ -3962,7 +3972,7 @@ static int tuner_1_table[] = {
 
 static void __devinit avermedia_eeprom(struct bttv *btv)
 {
-	int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
+	int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
 
 	tuner_make      = (eeprom_data[0x41] & 0x7);
 	tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
@@ -3970,24 +3980,24 @@ static void __devinit avermedia_eeprom(struct bttv *btv)
 	btv->has_remote = (eeprom_data[0x42] & 0x01);
 
 	if (tuner_make == 0 || tuner_make == 2)
-		if(tuner_format <=0x0a)
-			tuner = tuner_0_table[tuner_format];
+		if (tuner_format <= 0x0a)
+			tuner_type = tuner_0_table[tuner_format];
 	if (tuner_make == 1)
-		if(tuner_format <=9)
-			tuner = tuner_1_table[tuner_format];
+		if (tuner_format <= 9)
+			tuner_type = tuner_1_table[tuner_format];
 
 	if (tuner_make == 4)
-		if(tuner_format == 0x09)
-			tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
+		if (tuner_format == 0x09)
+			tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
 
 	printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
-		btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
-	if(tuner) {
-		btv->tuner_type=tuner;
-		printk("%d",tuner);
+		btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
+	if (tuner_type) {
+		btv->tuner_type = tuner_type;
+		printk(KERN_CONT "%d", tuner_type);
 	} else
-		printk("Unknown type");
-	printk(" radio:%s remote control:%s\n",
+		printk(KERN_CONT "Unknown type");
+	printk(KERN_CONT " radio:%s remote control:%s\n",
 	       tuner_tv_fm     ? "yes" : "no",
 	       btv->has_remote ? "yes" : "no");
 }
@@ -4029,7 +4039,8 @@ static void __devinit boot_msp34xx(struct bttv *btv, int pin)
 
 	gpio_inout(mask,mask);
 	gpio_bits(mask,0);
-	udelay(2500);
+	mdelay(2);
+	udelay(500);
 	gpio_bits(mask,mask);
 
 	if (bttv_gpio)
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 85bf31ab878..6ae4cc860ef 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -96,7 +96,6 @@ static unsigned int irq_iswitch;
 static unsigned int uv_ratio    = 50;
 static unsigned int full_luma_range;
 static unsigned int coring;
-extern int no_overlay;
 
 /* API features (turn on/off stuff for testing) */
 static unsigned int v4l2        = 1;
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 649682aac1a..5b1b8e4c78b 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -244,7 +244,8 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc,
 		  const struct bttv_format *fmt, struct bttv_overlay *ov,
 		  int skip_even, int skip_odd)
 {
-	int dwords,rc,line,maxy,start,end,skip,nskips;
+	int dwords, rc, line, maxy, start, end;
+	unsigned skip, nskips;
 	struct btcx_skiplist *skips;
 	__le32 *rp;
 	u32 ri,ra;
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 08ef54a22c9..b4d940b2e44 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -267,6 +267,11 @@ int bttv_sub_add_device(struct bttv_core *core, char *name);
 int bttv_sub_del_devices(struct bttv_core *core);
 
 /* ---------------------------------------------------------- */
+/* bttv-cards.c                                               */
+
+extern int no_overlay;
+
+/* ---------------------------------------------------------- */
 /* bttv-driver.c                                              */
 
 /* insmod options */
diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c
index f42701f82e7..3324ab38f58 100644
--- a/drivers/media/video/btcx-risc.c
+++ b/drivers/media/video/btcx-risc.c
@@ -184,12 +184,12 @@ btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips)
 }
 
 void
-btcx_calc_skips(int line, int width, unsigned int *maxy,
+btcx_calc_skips(int line, int width, int *maxy,
 		struct btcx_skiplist *skips, unsigned int *nskips,
 		const struct v4l2_clip *clips, unsigned int nclips)
 {
 	unsigned int clip,skip;
-	int end,maxline;
+	int end, maxline;
 
 	skip=0;
 	maxline = 9999;
diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h
index 861bc811282..f8bc6e8e7b5 100644
--- a/drivers/media/video/btcx-risc.h
+++ b/drivers/media/video/btcx-risc.h
@@ -23,7 +23,7 @@ int btcx_screen_clips(int swidth, int sheight, struct v4l2_rect *win,
 int btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips,
 	       unsigned int n, int mask);
 void btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips);
-void btcx_calc_skips(int line, int width, unsigned int *maxy,
+void btcx_calc_skips(int line, int width, int *maxy,
 		     struct btcx_skiplist *skips, unsigned int *nskips,
 		     const struct v4l2_clip *clips, unsigned int nclips);
 
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index d3b3268bace..6e39e253ce5 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -946,8 +946,7 @@ static int init_bwqcam(struct parport *port)
 
 	printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
 
-	if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
-	{
+	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		parport_unregister_device(qcam->pdev);
 		kfree(qcam);
 		return -ENODEV;
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index fe9379b282d..7f6c6b4bec1 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -787,8 +787,7 @@ static int init_cqcam(struct parport *port)
 
 	parport_release(qcam->pdev);
 
-	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
-	{
+	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
 		       qcam->pport->name);
 		parport_unregister_device(qcam->pdev);
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index dc8cc6115e2..a661800b0e6 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -3955,7 +3955,7 @@ struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowleve
 	camera->lowlevel_data = lowlevel;
 
 	/* register v4l device */
-	if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+	if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		kfree(camera);
 		printk(KERN_DEBUG "video_register_device failed\n");
 		return NULL;
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 515c8b57a60..eb9f15cd4c4 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -1024,7 +1024,6 @@ static int ioctl_queryctrl(void *arg,struct camera_data *cam)
 		if(cam->params.pnp_id.device_type == DEVICE_STV_672 &&
 		   cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){
 			// Maximum 15fps
-			int i;
 			for(i=0; i<c->maximum; ++i) {
 				if(framerate_controls[i].value ==
 				   CPIA2_VP_FRAMERATE_15) {
@@ -1959,8 +1958,7 @@ int cpia2_register_camera(struct camera_data *cam)
 	reset_camera_struct_v4l(cam);
 
 	/* register v4l device */
-	if (video_register_device
-	    (cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+	if (video_register_device(cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		ERR("video_register_device failed\n");
 		video_device_release(cam->vdev);
 		return -ENODEV;
diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c
index 61d14d26686..a662b15d5b9 100644
--- a/drivers/media/video/cs5345.c
+++ b/drivers/media/video/cs5345.c
@@ -35,7 +35,7 @@ static int debug;
 
 module_param(debug, bool, 0644);
 
-MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On");
+MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
 
 
 /* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c
index e30a589c0e1..c4444500b33 100644
--- a/drivers/media/video/cs53l32a.c
+++ b/drivers/media/video/cs53l32a.c
@@ -39,7 +39,7 @@ static int debug;
 
 module_param(debug, bool, 0644);
 
-MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On");
+MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
 
 static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END };
 
diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c
index 834b9248242..e996a4e3123 100644
--- a/drivers/media/video/cx18/cx18-av-firmware.c
+++ b/drivers/media/video/cx18/cx18-av-firmware.c
@@ -32,7 +32,7 @@ int cx18_av_loadfw(struct cx18 *cx)
 	u32 v;
 	const u8 *ptr;
 	int i;
-	int retries = 0;
+	int retries1 = 0;
 
 	if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) {
 		CX18_ERR("unable to open firmware %s\n", FWFILE);
@@ -41,7 +41,7 @@ int cx18_av_loadfw(struct cx18 *cx)
 
 	/* The firmware load often has byte errors, so allow for several
 	   retries, both at byte level and at the firmware load level. */
-	while (retries < 5) {
+	while (retries1 < 5) {
 		cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
 		cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6);
 
@@ -57,9 +57,9 @@ int cx18_av_loadfw(struct cx18 *cx)
 		for (i = 0; i < size; i++) {
 			u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
 			u32 value = 0;
-			int retries;
+			int retries2;
 
-			for (retries = 0; retries < 5; retries++) {
+			for (retries2 = 0; retries2 < 5; retries2++) {
 				cx18_av_write4(cx, CXADEC_DL_CTL, dl_control);
 				udelay(10);
 				value = cx18_av_read4(cx, CXADEC_DL_CTL);
@@ -69,18 +69,18 @@ int cx18_av_loadfw(struct cx18 *cx)
 				   the address.  We can only write the lower
 				   address byte of the address. */
 				if ((value & 0x3F00) != (dl_control & 0x3F00)) {
-					retries = 5;
+					retries2 = 5;
 					break;
 				}
 			}
-			if (retries >= 5)
+			if (retries2 >= 5)
 				break;
 		}
 		if (i == size)
 			break;
-		retries++;
+		retries1++;
 	}
-	if (retries >= 5) {
+	if (retries1 >= 5) {
 		CX18_ERR("unable to load firmware %s\n", FWFILE);
 		release_firmware(fw);
 		return -EIO;
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 22434aadde3..bd18afebbf8 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -74,9 +74,9 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
 				     -1, -1, -1, -1, -1, -1, -1, -1,
 				     -1, -1, -1, -1, -1, -1, -1, -1 };
 
-static int cardtype_c = 1;
-static int tuner_c = 1;
-static int radio_c = 1;
+static unsigned cardtype_c = 1;
+static unsigned tuner_c = 1;
+static unsigned radio_c = 1;
 static char pal[] = "--";
 static char secam[] = "--";
 static char ntsc[] = "-";
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index cae38985b13..1e420a804fc 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -1,7 +1,7 @@
 /*
  *  cx18 functions for DVB support
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-dvb.h b/drivers/media/video/cx18/cx18-dvb.h
index d6a6ccda79a..bf8d8f6f545 100644
--- a/drivers/media/video/cx18/cx18-dvb.h
+++ b/drivers/media/video/cx18/cx18-dvb.h
@@ -1,7 +1,7 @@
 /*
  *  cx18 functions for DVB support
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index 25114a5cbd5..ab218315c84 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -61,7 +61,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb)
 		CX18_WARN("Ack struct = %d for %s\n",
 			mb->args[2], s->name);
 	id = read_enc(off);
-	buf = cx18_queue_find_buf(s, id, read_enc(off + 4));
+	buf = cx18_queue_get_buf_irq(s, id, read_enc(off + 4));
 	CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
 	if (buf) {
 		cx18_buf_sync_for_cpu(s, buf);
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index 6990b77c620..dbe792ac300 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -78,12 +78,13 @@ struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q)
 	return buf;
 }
 
-struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
 	u32 bytesused)
 {
 	struct cx18 *cx = s->cx;
 	struct list_head *p;
 
+	spin_lock(&s->qlock);
 	list_for_each(p, &s->q_free.list) {
 		struct cx18_buffer *buf =
 			list_entry(p, struct cx18_buffer, list);
@@ -92,114 +93,48 @@ struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
 			continue;
 		buf->bytesused = bytesused;
 		/* the transport buffers are handled differently,
-		   so there is no need to move them to the full queue */
-		if (s->type == CX18_ENC_STREAM_TYPE_TS)
-			return buf;
-		s->q_free.buffers--;
-		s->q_free.length -= s->buf_size;
-		s->q_full.buffers++;
-		s->q_full.length += s->buf_size;
-		s->q_full.bytesused += buf->bytesused;
-		list_move_tail(&buf->list, &s->q_full.list);
+		   they are not moved to the full queue */
+		if (s->type != CX18_ENC_STREAM_TYPE_TS) {
+			s->q_free.buffers--;
+			s->q_free.length -= s->buf_size;
+			s->q_full.buffers++;
+			s->q_full.length += s->buf_size;
+			s->q_full.bytesused += buf->bytesused;
+			list_move_tail(&buf->list, &s->q_full.list);
+		}
+		spin_unlock(&s->qlock);
 		return buf;
 	}
+	spin_unlock(&s->qlock);
 	CX18_ERR("Cannot find buffer %d for stream %s\n", id, s->name);
 	return NULL;
 }
 
-static void cx18_queue_move_buf(struct cx18_stream *s, struct cx18_queue *from,
-		struct cx18_queue *to, int clear, int full)
-{
-	struct cx18_buffer *buf =
-		list_entry(from->list.next, struct cx18_buffer, list);
-
-	list_move_tail(from->list.next, &to->list);
-	from->buffers--;
-	from->length -= s->buf_size;
-	from->bytesused -= buf->bytesused - buf->readpos;
-	/* special handling for q_free */
-	if (clear)
-		buf->bytesused = buf->readpos = buf->b_flags = 0;
-	else if (full) {
-		/* special handling for stolen buffers, assume
-		   all bytes are used. */
-		buf->bytesused = s->buf_size;
-		buf->readpos = buf->b_flags = 0;
-	}
-	to->buffers++;
-	to->length += s->buf_size;
-	to->bytesused += buf->bytesused - buf->readpos;
-}
-
-/* Move 'needed_bytes' worth of buffers from queue 'from' into queue 'to'.
-   If 'needed_bytes' == 0, then move all buffers from 'from' into 'to'.
-   If 'steal' != NULL, then buffers may also taken from that queue if
-   needed.
-
-   The buffer is automatically cleared if it goes to the free queue. It is
-   also cleared if buffers need to be taken from the 'steal' queue and
-   the 'from' queue is the free queue.
-
-   When 'from' is q_free, then needed_bytes is compared to the total
-   available buffer length, otherwise needed_bytes is compared to the
-   bytesused value. For the 'steal' queue the total available buffer
-   length is always used.
-
-   -ENOMEM is returned if the buffers could not be obtained, 0 if all
-   buffers where obtained from the 'from' list and if non-zero then
-   the number of stolen buffers is returned. */
-static int cx18_queue_move(struct cx18_stream *s, struct cx18_queue *from,
-			   struct cx18_queue *steal, struct cx18_queue *to,
-			   int needed_bytes)
+/* Move all buffers of a queue to q_free, while flushing the buffers */
+static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q)
 {
 	unsigned long flags;
-	int rc = 0;
-	int from_free = from == &s->q_free;
-	int to_free = to == &s->q_free;
-	int bytes_available;
-
-	spin_lock_irqsave(&s->qlock, flags);
-	if (needed_bytes == 0) {
-		from_free = 1;
-		needed_bytes = from->length;
-	}
-
-	bytes_available = from_free ? from->length : from->bytesused;
-	bytes_available += steal ? steal->length : 0;
+	struct cx18_buffer *buf;
 
-	if (bytes_available < needed_bytes) {
-		spin_unlock_irqrestore(&s->qlock, flags);
-		return -ENOMEM;
-	}
-	if (from_free) {
-		u32 old_length = to->length;
+	if (q == &s->q_free)
+		return;
 
-		while (to->length - old_length < needed_bytes) {
-			if (list_empty(&from->list))
-				from = steal;
-			if (from == steal)
-				rc++; 	/* keep track of 'stolen' buffers */
-			cx18_queue_move_buf(s, from, to, 1, 0);
-		}
-	} else {
-		u32 old_bytesused = to->bytesused;
-
-		while (to->bytesused - old_bytesused < needed_bytes) {
-			if (list_empty(&from->list))
-				from = steal;
-			if (from == steal)
-				rc++; 	/* keep track of 'stolen' buffers */
-			cx18_queue_move_buf(s, from, to, to_free, rc);
-		}
+	spin_lock_irqsave(&s->qlock, flags);
+	while (!list_empty(&q->list)) {
+		buf = list_entry(q->list.next, struct cx18_buffer, list);
+		list_move_tail(q->list.next, &s->q_free.list);
+		buf->bytesused = buf->readpos = buf->b_flags = 0;
+		s->q_free.buffers++;
+		s->q_free.length += s->buf_size;
 	}
+	cx18_queue_init(q);
 	spin_unlock_irqrestore(&s->qlock, flags);
-	return rc;
 }
 
 void cx18_flush_queues(struct cx18_stream *s)
 {
-	cx18_queue_move(s, &s->q_io, NULL, &s->q_free, 0);
-	cx18_queue_move(s, &s->q_full, NULL, &s->q_free, 0);
+	cx18_queue_flush(s, &s->q_io);
+	cx18_queue_flush(s, &s->q_full);
 }
 
 int cx18_stream_alloc(struct cx18_stream *s)
@@ -214,10 +149,10 @@ int cx18_stream_alloc(struct cx18_stream *s)
 		s->name, s->buffers, s->buf_size,
 		s->buffers * s->buf_size / 1024);
 
-	if (((char *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
-				(char *)cx->scb) > SCB_RESERVED_SIZE) {
-		unsigned bufsz = (((char *)cx->scb) + SCB_RESERVED_SIZE -
-					((char *)cx->scb->cpu_mdl));
+	if (((char __iomem *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
+				(char __iomem *)cx->scb) > SCB_RESERVED_SIZE) {
+		unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE -
+					((char __iomem *)cx->scb->cpu_mdl));
 
 		CX18_ERR("Too many buffers, cannot fit in SCB area\n");
 		CX18_ERR("Max buffers = %zd\n",
diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h
index 91423b9863a..7f93bb13c09 100644
--- a/drivers/media/video/cx18/cx18-queue.h
+++ b/drivers/media/video/cx18/cx18-queue.h
@@ -46,7 +46,7 @@ void cx18_queue_init(struct cx18_queue *q);
 void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
 	struct cx18_queue *q);
 struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q);
-struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
 	u32 bytesused);
 void cx18_flush_queues(struct cx18_stream *s);
 
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 8118091568f..7b0e8c01692 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -4,7 +4,7 @@
  *
  *    (c) 2004 Jelle Foks <jelle@foks.8m.com>
  *    (c) 2004 Gerd Knorr <kraxel@bytesex.org>
- *    (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *    (c) 2008 Steven Toth <stoth@linuxtv.org>
  *      - CX23885/7/8 support
  *
  *  Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index a19de850955..c36d3f63210 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 6286a9cf957..25fb0993874 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -33,7 +33,7 @@
 #include "cx23885.h"
 
 MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
 MODULE_LICENSE("GPL");
 
 static unsigned int debug;
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 0a2e6558cd6..291b9d008da 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index c6bb0a05bc1..f98e476e961 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h
index bdd11bc513a..20b68a23626 100644
--- a/drivers/media/video/cx23885/cx23885-reg.h
+++ b/drivers/media/video/cx23885/cx23885-reg.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-vbi.c b/drivers/media/video/cx23885/cx23885-vbi.c
index e36e3fcae2f..35e61cd112f 100644
--- a/drivers/media/video/cx23885/cx23885-vbi.c
+++ b/drivers/media/video/cx23885/cx23885-vbi.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index ad2235dab5b..6047c78d84b 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -41,7 +41,7 @@
 #endif
 
 MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
 MODULE_LICENSE("GPL");
 
 /* ------------------------------------------------------------------ */
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 00dfdc89d64..e23d97c071e 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 209d3bcb5db..4da8cd74f00 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -13,7 +13,7 @@
  * NTSC sliced VBI support by Christopher Neufeld <television@cneufeld.ca>
  * with additional fixes by Hans Verkuil <hverkuil@xs4all.nl>.
  *
- * CX23885 support by Steven Toth <stoth@hauppauge.com>.
+ * CX23885 support by Steven Toth <stoth@linuxtv.org>.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index 48f4b92a8f8..79faedf5852 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -403,6 +403,7 @@ static int dabusb_fpga_download (pdabusb_t s, const char *fname)
 	ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev);
 	if (ret) {
 		err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret);
+		kfree(b);
 		return ret;
 	}
 
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 476ae44a62d..452da70e719 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1015,6 +1015,7 @@ struct em28xx_board em28xx_boards[] = {
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.mts_firmware = 1,
 		.decoder      = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 2d170d101c2..8db2a05bf9c 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -2588,6 +2588,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	cam->v4ldev->fops = &et61x251_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
+	cam->v4ldev->parent = &udev->dev;
 	video_set_drvdata(cam->v4ldev, cam);
 
 	init_completion(&cam->probe);
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 44b0bffeb20..4d9f4cc255a 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -123,8 +123,8 @@ static void reg_r(struct gspca_dev *gspca_dev,
 {
 	struct usb_device *dev = gspca_dev->dev;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	if (len > sizeof gspca_dev->usb_buf) {
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
 		err("reg_r: buffer overflow");
 		return;
 	}
@@ -163,8 +163,8 @@ static void reg_w(struct gspca_dev *gspca_dev,
 {
 	struct usb_device *dev = gspca_dev->dev;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	if (len > sizeof gspca_dev->usb_buf) {
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
 		err("reg_w: buffer overflow");
 		return;
 	}
@@ -731,13 +731,13 @@ static void cx11646_jpeg(struct gspca_dev*gspca_dev)
 	reg_w_val(gspca_dev, 0x0000, 0x00);
 	/* wait for completion */
 	retry = 50;
-	while (retry--) {
+	do {
 		reg_r(gspca_dev, 0x0002, 1);
 							/* 0x07 until 0x00 */
 		if (gspca_dev->usb_buf[0] == 0x00)
 			break;
 		reg_w_val(gspca_dev, 0x0053, 0x00);
-	}
+	} while (--retry);
 	if (retry == 0)
 		PDEBUG(D_ERR, "Damned Errors sending jpeg Table");
 	/* send the qtable now */
@@ -826,8 +826,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	cx11646_init1(gspca_dev);
 	cx11646_initsize(gspca_dev);
@@ -845,10 +845,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	cx11646_jpeg(gspca_dev);
 }
 
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	int retry = 50;
@@ -871,10 +867,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	reg_w_val(gspca_dev, 0x00fc, 0xe0);
 }
 
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -998,11 +990,9 @@ static struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
-	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
@@ -1026,6 +1016,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index c8c2f02fcf0..4ff0e386914 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -81,6 +81,7 @@ static struct ctrl sd_ctrls[] = {
 	 .set = sd_setcontrast,
 	 .get = sd_getcontrast,
 	 },
+#define COLOR_IDX 2
 	{
 	 {
 	  .id = V4L2_CID_SATURATION,
@@ -233,8 +234,8 @@ static void reg_r(struct gspca_dev *gspca_dev,
 {
 	struct usb_device *dev = gspca_dev->dev;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	if (len > sizeof gspca_dev->usb_buf) {
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
 		err("reg_r: buffer overflow");
 		return;
 	}
@@ -271,8 +272,8 @@ static void reg_w(struct gspca_dev *gspca_dev,
 {
 	struct usb_device *dev = gspca_dev->dev;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	if (len > sizeof gspca_dev->usb_buf) {
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
 		err("reg_w: buffer overflow");
 		return;
 	}
@@ -461,6 +462,52 @@ static void Et_init2(struct gspca_dev *gspca_dev)
 	reg_w_val(gspca_dev, 0x80, 0x20);	/* 0x20; */
 }
 
+static void setbrightness(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	__u8 brightness = sd->brightness;
+
+	for (i = 0; i < 4; i++)
+		reg_w_val(gspca_dev, ET_O_RED + i, brightness);
+}
+
+static void getbrightness(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	int brightness = 0;
+
+	for (i = 0; i < 4; i++) {
+		reg_r(gspca_dev, ET_O_RED + i, 1);
+		brightness += gspca_dev->usb_buf[0];
+	}
+	sd->brightness = brightness >> 3;
+}
+
+static void setcontrast(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	__u8 RGBG[] = { 0x80, 0x80, 0x80, 0x80, 0x00, 0x00 };
+	__u8 contrast = sd->contrast;
+
+	memset(RGBG, contrast, sizeof(RGBG) - 2);
+	reg_w(gspca_dev, ET_G_RED, RGBG, 6);
+}
+
+static void getcontrast(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	int contrast = 0;
+
+	for (i = 0; i < 4; i++) {
+		reg_r(gspca_dev, ET_G_RED + i, 1);
+		contrast += gspca_dev->usb_buf[0];
+	}
+	sd->contrast = contrast >> 2;
+}
+
 static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -492,6 +539,16 @@ static void getcolors(struct gspca_dev *gspca_dev)
 	}
 }
 
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->autogain)
+		sd->ag_cnt = AG_CNT_START;
+	else
+		sd->ag_cnt = -1;
+}
+
 static void Et_init1(struct gspca_dev *gspca_dev)
 {
 	__u8 value;
@@ -609,16 +666,18 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	} else {
 		cam->cam_mode = vga_mode;
 		cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
+		gspca_dev->ctrl_dis = (1 << COLOR_IDX);
 	}
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
 	sd->colors = COLOR_DEF;
 	sd->autogain = AUTOGAIN_DEF;
+	sd->ag_cnt = -1;
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
@@ -641,6 +700,8 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	else
 		Et_init2(gspca_dev);
 
+	setautogain(gspca_dev);
+
 	reg_w_val(gspca_dev, ET_RESET_ALL, 0x08);
 	et_video(gspca_dev, 1);		/* video on */
 }
@@ -650,60 +711,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	et_video(gspca_dev, 0);		/* video off */
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
-static void setbrightness(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	int i;
-	__u8 brightness = sd->brightness;
-
-	for (i = 0; i < 4; i++)
-		reg_w_val(gspca_dev, ET_O_RED + i, brightness);
-}
-
-static void getbrightness(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	int i;
-	int brightness = 0;
-
-	for (i = 0; i < 4; i++) {
-		reg_r(gspca_dev, ET_O_RED + i, 1);
-		brightness += gspca_dev->usb_buf[0];
-	}
-	sd->brightness = brightness >> 3;
-}
-
-static void setcontrast(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	__u8 RGBG[] = { 0x80, 0x80, 0x80, 0x80, 0x00, 0x00 };
-	__u8 contrast = sd->contrast;
-
-	memset(RGBG, contrast, sizeof(RGBG) - 2);
-	reg_w(gspca_dev, ET_G_RED, RGBG, 6);
-}
-
-static void getcontrast(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	int i;
-	int contrast = 0;
-
-	for (i = 0; i < 4; i++) {
-		reg_r(gspca_dev, ET_G_RED + i, 1);
-		contrast += gspca_dev->usb_buf[0];
-	}
-	sd->contrast = contrast >> 2;
-}
-
 static __u8 Et_getgainG(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -733,15 +740,22 @@ static void Et_setgainG(struct gspca_dev *gspca_dev, __u8 gain)
 #define LIMIT(color) \
 	(unsigned char)((color > 0xff)?0xff:((color < 0)?0:color))
 
-static void setautogain(struct gspca_dev *gspca_dev)
+static void do_autogain(struct gspca_dev *gspca_dev)
 {
-	__u8 luma = 0;
+	struct sd *sd = (struct sd *) gspca_dev;
+	__u8 luma;
 	__u8 luma_mean = 128;
 	__u8 luma_delta = 20;
 	__u8 spring = 4;
-	int Gbright = 0;
+	int Gbright;
 	__u8 r, g, b;
 
+	if (sd->ag_cnt < 0)
+		return;
+	if (--sd->ag_cnt >= 0)
+		return;
+	sd->ag_cnt = AG_CNT_START;
+
 	Gbright = Et_getgainG(gspca_dev);
 	reg_r(gspca_dev, ET_LUMA_CENTER, 4);
 	g = (gspca_dev->usb_buf[0] + gspca_dev->usb_buf[3]) >> 1;
@@ -768,7 +782,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
-	struct sd *sd;
 	int seqframe;
 
 	seqframe = data[0] & 0x3f;
@@ -783,13 +796,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
 					data, 0);
 		gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len);
-		sd = (struct sd *) gspca_dev;
-		if (sd->ag_cnt >= 0) {
-			if (--sd->ag_cnt < 0) {
-				sd->ag_cnt = AG_CNT_START;
-				setautogain(gspca_dev);
-			}
-		}
 		return;
 	}
 	if (len) {
@@ -862,10 +868,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->autogain = val;
-	if (val)
-		sd->ag_cnt = AG_CNT_START;
-	else
-		sd->ag_cnt = -1;
+	if (gspca_dev->streaming)
+		setautogain(gspca_dev);
 	return 0;
 }
 
@@ -883,20 +887,19 @@ static struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
+	.dq_callback = do_autogain,
 };
 
 /* -- module initialisation -- */
 static __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_ET61X251
 	{USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106},
-#endif
+#if !defined CONFIG_USB_ET61X251 && !defined CONFIG_USB_ET61X251_MODULE
 	{USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX},
+#endif
 	{}
 };
 
@@ -915,6 +918,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 3a051c925ff..7be69284da0 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -47,7 +47,7 @@ MODULE_LICENSE("GPL");
 
 static int video_nr = -1;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 int gspca_debug = D_ERR | D_PROBE;
 EXPORT_SYMBOL(gspca_debug);
 
@@ -114,7 +114,10 @@ static void fill_frame(struct gspca_dev *gspca_dev,
 	cam_pkt_op pkt_scan;
 
 	if (urb->status != 0) {
-		PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
+#ifdef CONFIG_PM
+		if (!gspca_dev->frozen)
+#endif
+			PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
 		return;		/* disconnection ? */
 	}
 	pkt_scan = gspca_dev->sd_desc->pkt_scan;
@@ -555,10 +558,12 @@ static void gspca_stream_off(struct gspca_dev *gspca_dev)
 	gspca_dev->streaming = 0;
 	atomic_set(&gspca_dev->nevent, 0);
 	if (gspca_dev->present) {
-		gspca_dev->sd_desc->stopN(gspca_dev);
+		if (gspca_dev->sd_desc->stopN)
+			gspca_dev->sd_desc->stopN(gspca_dev);
 		destroy_urbs(gspca_dev);
 		gspca_set_alt0(gspca_dev);
-		gspca_dev->sd_desc->stop0(gspca_dev);
+		if (gspca_dev->sd_desc->stop0)
+			gspca_dev->sd_desc->stop0(gspca_dev);
 		PDEBUG(D_STREAM, "stream off OK");
 	}
 }
@@ -677,7 +682,7 @@ static int try_fmt_vid_cap(struct gspca_dev *gspca_dev,
 	w = fmt->fmt.pix.width;
 	h = fmt->fmt.pix.height;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	if (gspca_debug & D_CONF)
 		PDEBUG_MODE("try fmt cap", fmt->fmt.pix.pixelformat, w, h);
 #endif
@@ -767,31 +772,20 @@ static int dev_open(struct inode *inode, struct file *file)
 		goto out;
 	}
 
-	/* if not done yet, initialize the sensor */
-	if (gspca_dev->users == 0) {
-		if (mutex_lock_interruptible(&gspca_dev->usb_lock)) {
-			ret = -ERESTARTSYS;
-			goto out;
-		}
-		ret = gspca_dev->sd_desc->open(gspca_dev);
-		mutex_unlock(&gspca_dev->usb_lock);
-		if (ret != 0) {
-			PDEBUG(D_ERR|D_CONF, "init device failed %d", ret);
-			goto out;
-		}
-	} else if (gspca_dev->users > 4) {	/* (arbitrary value) */
+	if (gspca_dev->users > 4) {	/* (arbitrary value) */
 		ret = -EBUSY;
 		goto out;
 	}
 	gspca_dev->users++;
 	file->private_data = gspca_dev;
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	/* activate the v4l2 debug */
 	if (gspca_debug & D_V4L2)
 		gspca_dev->vdev.debug |= 3;
 	else
 		gspca_dev->vdev.debug &= ~3;
 #endif
+	ret = 0;
 out:
 	mutex_unlock(&gspca_dev->queue_lock);
 	if (ret != 0)
@@ -812,11 +806,11 @@ static int dev_close(struct inode *inode, struct file *file)
 
 	/* if the file did the capture, free the streaming resources */
 	if (gspca_dev->capt_file == file) {
-		mutex_lock(&gspca_dev->usb_lock);
-		if (gspca_dev->streaming)
+		if (gspca_dev->streaming) {
+			mutex_lock(&gspca_dev->usb_lock);
 			gspca_stream_off(gspca_dev);
-		gspca_dev->sd_desc->close(gspca_dev);
-		mutex_unlock(&gspca_dev->usb_lock);
+			mutex_unlock(&gspca_dev->usb_lock);
+		}
 		frame_free(gspca_dev);
 		gspca_dev->capt_file = NULL;
 		gspca_dev->memory = GSPCA_MEMORY_NO;
@@ -853,42 +847,44 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	return 0;
 }
 
-/* the use of V4L2_CTRL_FLAG_NEXT_CTRL asks for the controls to be sorted */
 static int vidioc_queryctrl(struct file *file, void *priv,
 			   struct v4l2_queryctrl *q_ctrl)
 {
 	struct gspca_dev *gspca_dev = priv;
-	int i;
+	int i, ix;
 	u32 id;
 
+	ix = -1;
 	id = q_ctrl->id;
 	if (id & V4L2_CTRL_FLAG_NEXT_CTRL) {
 		id &= V4L2_CTRL_ID_MASK;
 		id++;
 		for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
-			if (id >= gspca_dev->sd_desc->ctrls[i].qctrl.id) {
-				memcpy(q_ctrl,
-					&gspca_dev->sd_desc->ctrls[i].qctrl,
-					sizeof *q_ctrl);
-				return 0;
+			if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id)
+				continue;
+			if (ix < 0) {
+				ix = i;
+				continue;
 			}
+			if (gspca_dev->sd_desc->ctrls[i].qctrl.id
+				    > gspca_dev->sd_desc->ctrls[ix].qctrl.id)
+				continue;
+			ix = i;
 		}
-		return -EINVAL;
 	}
 	for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
 		if (id == gspca_dev->sd_desc->ctrls[i].qctrl.id) {
-			memcpy(q_ctrl,
-				&gspca_dev->sd_desc->ctrls[i].qctrl,
-				sizeof *q_ctrl);
-			return 0;
+			ix = i;
+			break;
 		}
 	}
-	if (id >= V4L2_CID_BASE
-	    && id <= V4L2_CID_LASTP1) {
+	if (ix < 0)
+		return -EINVAL;
+	memcpy(q_ctrl, &gspca_dev->sd_desc->ctrls[ix].qctrl,
+		sizeof *q_ctrl);
+	if (gspca_dev->ctrl_dis & (1 << ix))
 		q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
-		return 0;
-	}
-	return -EINVAL;
+	return 0;
 }
 
 static int vidioc_s_ctrl(struct file *file, void *priv,
@@ -903,8 +899,10 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 	     i++, ctrls++) {
 		if (ctrl->id != ctrls->qctrl.id)
 			continue;
+		if (gspca_dev->ctrl_dis & (1 << i))
+			return -EINVAL;
 		if (ctrl->value < ctrls->qctrl.minimum
-		    && ctrl->value > ctrls->qctrl.maximum)
+		    || ctrl->value > ctrls->qctrl.maximum)
 			return -ERANGE;
 		PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value);
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
@@ -929,6 +927,8 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 	     i++, ctrls++) {
 		if (ctrl->id != ctrls->qctrl.id)
 			continue;
+		if (gspca_dev->ctrl_dis & (1 << i))
+			return -EINVAL;
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 			return -ERESTARTSYS;
 		ret = ctrls->get(gspca_dev, &ctrl->value);
@@ -1080,7 +1080,7 @@ static int vidioc_streamon(struct file *file, void *priv,
 		if (ret < 0)
 			goto out;
 	}
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	if (gspca_debug & D_STREAM) {
 		PDEBUG_MODE("stream on OK",
 			gspca_dev->pixfmt,
@@ -1403,7 +1403,7 @@ static int vidioc_dqbuf(struct file *file, void *priv,
 	i = ret;				/* frame index */
 	frame = &gspca_dev->frame[i];
 	if (gspca_dev->memory == V4L2_MEMORY_USERPTR) {
-		if (copy_to_user((__u8 *) frame->v4l2_buf.m.userptr,
+		if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr,
 				 frame->data,
 				 frame->v4l2_buf.bytesused)) {
 			PDEBUG(D_ERR|D_STREAM,
@@ -1731,6 +1731,12 @@ int gspca_dev_probe(struct usb_interface *intf,
 		err("couldn't kzalloc gspca struct");
 		return -EIO;
 	}
+	gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL);
+	if (!gspca_dev->usb_buf) {
+		err("out of memory");
+		ret = -EIO;
+		goto out;
+	}
 	gspca_dev->dev = dev;
 	gspca_dev->iface = interface->bInterfaceNumber;
 	gspca_dev->nbalt = intf->num_altsetting;
@@ -1738,10 +1744,13 @@ int gspca_dev_probe(struct usb_interface *intf,
 /*	gspca_dev->users = 0;			(done by kzalloc) */
 	gspca_dev->nbufread = 2;
 
-	/* configure the subdriver */
+	/* configure the subdriver and initialize the USB device */
 	ret = gspca_dev->sd_desc->config(gspca_dev, id);
 	if (ret < 0)
 		goto out;
+	ret = gspca_dev->sd_desc->init(gspca_dev);
+	if (ret < 0)
+		goto out;
 	ret = gspca_set_alt0(gspca_dev);
 	if (ret < 0)
 		goto out;
@@ -1771,6 +1780,7 @@ int gspca_dev_probe(struct usb_interface *intf,
 	PDEBUG(D_PROBE, "probe ok");
 	return 0;
 out:
+	kfree(gspca_dev->usb_buf);
 	kfree(gspca_dev);
 	return ret;
 }
@@ -1803,11 +1813,42 @@ void gspca_disconnect(struct usb_interface *intf)
 /* We don't want people trying to open up the device */
 	video_unregister_device(&gspca_dev->vdev);
 /* Free the memory */
+	kfree(gspca_dev->usb_buf);
 	kfree(gspca_dev);
 	PDEBUG(D_PROBE, "disconnect complete");
 }
 EXPORT_SYMBOL(gspca_disconnect);
 
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+	if (!gspca_dev->streaming)
+		return 0;
+	gspca_dev->frozen = 1;		/* avoid urb error messages */
+	if (gspca_dev->sd_desc->stopN)
+		gspca_dev->sd_desc->stopN(gspca_dev);
+	destroy_urbs(gspca_dev);
+	gspca_set_alt0(gspca_dev);
+	if (gspca_dev->sd_desc->stop0)
+		gspca_dev->sd_desc->stop0(gspca_dev);
+	return 0;
+}
+EXPORT_SYMBOL(gspca_suspend);
+
+int gspca_resume(struct usb_interface *intf)
+{
+	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+	gspca_dev->frozen = 0;
+	gspca_dev->sd_desc->init(gspca_dev);
+	if (gspca_dev->streaming)
+		return gspca_init_transfer(gspca_dev);
+	return 0;
+}
+EXPORT_SYMBOL(gspca_resume);
+#endif
 /* -- cam driver utility functions -- */
 
 /* auto gain and exposure algorithm based on the knee algorithm described here:
@@ -1913,7 +1954,7 @@ static void __exit gspca_exit(void)
 module_init(gspca_init);
 module_exit(gspca_exit);
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 module_param_named(debug, gspca_debug, int, 0644);
 MODULE_PARM_DESC(debug,
 		"Debug (bit) 0x01:error 0x02:probe 0x04:config"
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 3fd2c4eee20..c17625cff9b 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -9,7 +9,10 @@
 #include <media/v4l2-common.h>
 #include <linux/mutex.h>
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+/* compilation option */
+#define GSPCA_DEBUG 1
+
+#ifdef GSPCA_DEBUG
 /* GSPCA our debug messages */
 extern int gspca_debug;
 #define PDEBUG(level, fmt, args...) \
@@ -53,7 +56,6 @@ extern int gspca_debug;
 
 /* device information - set at probe time */
 struct cam {
-	char *dev_name;
 	struct v4l2_pix_format *cam_mode;	/* size nmodes */
 	char nmodes;
 	__u8 epaddr;
@@ -88,15 +90,14 @@ struct sd_desc {
 /* controls */
 	const struct ctrl *ctrls;
 	int nctrls;
-/* operations */
+/* mandatory operations */
 	cam_cf_op config;	/* called on probe */
-	cam_op open;		/* called on open */
+	cam_op init;		/* called on probe and resume */
 	cam_v_op start;		/* called on stream on */
-	cam_v_op stopN;		/* called on stream off - main alt */
-	cam_v_op stop0;		/* called on stream off - alt 0 */
-	cam_v_op close;		/* called on close */
 	cam_pkt_op pkt_scan;
 /* optional operations */
+	cam_v_op stopN;		/* called on stream off - main alt */
+	cam_v_op stop0;		/* called on stream off - alt 0 */
 	cam_v_op dq_callback;	/* called when a frame has been dequeued */
 	cam_jpg_op get_jcomp;
 	cam_jpg_op set_jcomp;
@@ -124,8 +125,10 @@ struct gspca_dev {
 
 	struct cam cam;				/* device information */
 	const struct sd_desc *sd_desc;		/* subdriver description */
+	unsigned ctrl_dis;		/* disabled controls (bit map) */
 
-	__u8 usb_buf[8];			/* buffer for USB exchanges */
+#define USB_BUF_SZ 64
+	__u8 *usb_buf;				/* buffer for USB exchanges */
 	struct urb *urb[MAX_NURBS];
 
 	__u8 *frbuf;				/* buffer for nframes */
@@ -152,6 +155,9 @@ struct gspca_dev {
 	struct mutex queue_lock;	/* ISOC queue protection */
 	__u32 sequence;			/* frame sequence number */
 	char streaming;
+#ifdef CONFIG_PM
+	char frozen;			/* suspend - resume */
+#endif
 	char users;			/* number of opens */
 	char present;			/* device connected */
 	char nbufread;			/* number of buffers for read() */
@@ -171,6 +177,10 @@ struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev,
 				    struct gspca_frame *frame,
 				    const __u8 *data,
 				    int len);
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message);
+int gspca_resume(struct usb_interface *intf);
+#endif
 int gspca_auto_gain_n_exposure(struct gspca_dev *gspca_dev, int avg_lum,
 	int desired_avg_lum, int deadzone, int gain_knee, int exposure_knee);
 #endif /* GSPCAV2_H */
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 21c4ee56a10..4d5db47ba8c 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -100,22 +100,6 @@ static int reg_w(struct gspca_dev *gspca_dev,
 	return rc;
 }
 
-static int reg_w_buf(struct gspca_dev *gspca_dev,
-			__u16 index, __u8 *buf, int len)
-{
-	int rc;
-
-	rc = usb_control_msg(gspca_dev->dev,
-			 usb_sndbulkpipe(gspca_dev->dev, 4),
-			 0x12,
-			 0xc8,		/* ?? */
-			 0,		/* value */
-			 index, buf, len, 500);
-	if (rc < 0)
-		PDEBUG(D_ERR, "reg write [%02x] error %d", index, rc);
-	return rc;
-}
-
 static void bulk_w(struct gspca_dev *gspca_dev,
 		   __u16 *pch,
 		   __u16 Address)
@@ -144,8 +128,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	return 0;
 }
@@ -175,7 +159,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	/*
 	   Initialize the MR97113 chip register
 	 */
-	data = kmalloc(16, GFP_KERNEL);
 	data[0] = 0x00;		/* address */
 	data[1] = 0x0c | 0x01;	/* reg 0 */
 	data[2] = 0x01;		/* reg 1 */
@@ -195,12 +178,10 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	data[10] = 0x5d;	/* reg 9, I2C device address
 				 *	[for PAS5101 (0x40)] [for MI (0x5d)] */
 
-	err_code = reg_w_buf(gspca_dev, data[0], data, 11);
-	kfree(data);
+	err_code = reg_w(gspca_dev, data[0], 11);
 	if (err_code < 0)
 		return;
 
-	data = gspca_dev->usb_buf;
 	data[0] = 0x23;		/* address */
 	data[1] = 0x09;		/* reg 35, append frame header */
 
@@ -358,14 +339,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		PDEBUG(D_ERR, "Camera Stop failed");
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -411,11 +384,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
@@ -439,6 +410,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 83139efc462..4df4eec9f7e 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -40,14 +40,15 @@ struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
 	/* Determined by sensor type */
-	short maxwidth;
-	short maxheight;
+	char sif;
 
 	unsigned char primary_i2c_slave;	/* I2C write id of sensor */
 
 	unsigned char brightness;
 	unsigned char contrast;
 	unsigned char colors;
+	__u8 hflip;
+	__u8 vflip;
 
 	char compress;		/* Should the next frame be compressed? */
 	char compress_inited;	/* Are compression params uploaded? */
@@ -62,11 +63,10 @@ struct sd {
 #define SEN_OV6630 2
 #define SEN_OV7610 3
 #define SEN_OV7620 4
-#define SEN_OV7630 5
-#define SEN_OV7640 6
-#define SEN_OV7670 7
-#define SEN_OV76BE 8
-#define SEN_OV8610 9
+#define SEN_OV7640 5
+#define SEN_OV7670 6
+#define SEN_OV76BE 7
+#define SEN_OV8610 8
 
 };
 
@@ -77,9 +77,12 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
-#define SD_BRIGHTNESS 0
 	{
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
@@ -88,12 +91,12 @@ static struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
-		.default_value = 127,
+#define BRIGHTNESS_DEF 127
+		.default_value = BRIGHTNESS_DEF,
 	    },
 	    .set = sd_setbrightness,
 	    .get = sd_getbrightness,
 	},
-#define SD_CONTRAST 1
 	{
 	    {
 		.id      = V4L2_CID_CONTRAST,
@@ -102,31 +105,63 @@ static struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
-		.default_value = 127,
+#define CONTRAST_DEF 127
+		.default_value = CONTRAST_DEF,
 	    },
 	    .set = sd_setcontrast,
 	    .get = sd_getcontrast,
 	},
-#define SD_COLOR 2
 	{
 	    {
 		.id      = V4L2_CID_SATURATION,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
-		.name    = "Saturation",
+		.name    = "Color",
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
-		.default_value = 127,
+#define COLOR_DEF 127
+		.default_value = COLOR_DEF,
 	    },
 	    .set = sd_setcolors,
 	    .get = sd_getcolors,
 	},
+/* next controls work with ov7670 only */
+#define HFLIP_IDX 3
+	{
+	    {
+		.id      = V4L2_CID_HFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Mirror",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define HFLIP_DEF 0
+		.default_value = HFLIP_DEF,
+	    },
+	    .set = sd_sethflip,
+	    .get = sd_gethflip,
+	},
+#define VFLIP_IDX 4
+	{
+	    {
+		.id      = V4L2_CID_VFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Vflip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define VFLIP_DEF 0
+		.default_value = VFLIP_DEF,
+	    },
+	    .set = sd_setvflip,
+	    .get = sd_getvflip,
+	},
 };
 
 static struct v4l2_pix_format vga_mode[] = {
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240 * 3 / 8 + 589,
+		.sizeimage = 320 * 240 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
@@ -138,12 +173,12 @@ static struct v4l2_pix_format vga_mode[] = {
 static struct v4l2_pix_format sif_mode[] = {
 	{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144 * 3 / 8 + 589,
+		.sizeimage = 176 * 144 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
 	{352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 352,
-		.sizeimage = 352 * 288 * 3 / 8 + 589,
+		.sizeimage = 352 * 288 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
@@ -225,6 +260,7 @@ static struct v4l2_pix_format sif_mode[] = {
 #define OV7670_REG_VSTART      0x19    /* Vert start high bits */
 #define OV7670_REG_VSTOP       0x1a    /* Vert stop high bits */
 #define OV7670_REG_MVFP        0x1e    /* Mirror / vflip */
+#define   OV7670_MVFP_VFLIP	 0x10    /* vertical flip */
 #define   OV7670_MVFP_MIRROR     0x20    /* Mirror image */
 #define OV7670_REG_AEW         0x24    /* AGC upper limit */
 #define OV7670_REG_AEB         0x25    /* AGC lower limit */
@@ -258,14 +294,539 @@ static struct v4l2_pix_format sif_mode[] = {
 #define OV7670_REG_HAECC7      0xaa    /* Hist AEC/AGC control 7 */
 #define OV7670_REG_BD60MAX     0xab    /* 60hz banding step limit */
 
-struct ovsensor_window {
-	short x;
-	short y;
-	short width;
-	short height;
-/*	int format; */
-	short quarter;		/* Scale width and height down 2x */
-	short clockdiv;		/* Clock divisor setting */
+struct ov_regvals {
+	__u8 reg;
+	__u8 val;
+};
+struct ov_i2c_regvals {
+	__u8 reg;
+	__u8 val;
+};
+
+static const struct ov_i2c_regvals norm_6x20[] = {
+	{ 0x12, 0x80 }, /* reset */
+	{ 0x11, 0x01 },
+	{ 0x03, 0x60 },
+	{ 0x05, 0x7f }, /* For when autoadjust is off */
+	{ 0x07, 0xa8 },
+	/* The ratio of 0x0c and 0x0d  controls the white point */
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+	{ 0x0f, 0x15 }, /* COMS */
+	{ 0x10, 0x75 }, /* AEC Exposure time */
+	{ 0x12, 0x24 }, /* Enable AGC */
+	{ 0x14, 0x04 },
+	/* 0x16: 0x06 helps frame stability with moving objects */
+	{ 0x16, 0x06 },
+/*	{ 0x20, 0x30 },  * Aperture correction enable */
+	{ 0x26, 0xb2 }, /* BLC enable */
+	/* 0x28: 0x05 Selects RGB format if RGB on */
+	{ 0x28, 0x05 },
+	{ 0x2a, 0x04 }, /* Disable framerate adjust */
+/*	{ 0x2b, 0xac },  * Framerate; Set 2a[7] first */
+	{ 0x2d, 0x99 },
+	{ 0x33, 0xa0 }, /* Color Processing Parameter */
+	{ 0x34, 0xd2 }, /* Max A/D range */
+	{ 0x38, 0x8b },
+	{ 0x39, 0x40 },
+
+	{ 0x3c, 0x39 }, /* Enable AEC mode changing */
+	{ 0x3c, 0x3c }, /* Change AEC mode */
+	{ 0x3c, 0x24 }, /* Disable AEC mode changing */
+
+	{ 0x3d, 0x80 },
+	/* These next two registers (0x4a, 0x4b) are undocumented.
+	 * They control the color balance */
+	{ 0x4a, 0x80 },
+	{ 0x4b, 0x80 },
+	{ 0x4d, 0xd2 }, /* This reduces noise a bit */
+	{ 0x4e, 0xc1 },
+	{ 0x4f, 0x04 },
+/* Do 50-53 have any effect? */
+/* Toggle 0x12[2] off and on here? */
+};
+
+static const struct ov_i2c_regvals norm_6x30[] = {
+	{ 0x12, 0x80 }, /* Reset */
+	{ 0x00, 0x1f }, /* Gain */
+	{ 0x01, 0x99 }, /* Blue gain */
+	{ 0x02, 0x7c }, /* Red gain */
+	{ 0x03, 0xc0 }, /* Saturation */
+	{ 0x05, 0x0a }, /* Contrast */
+	{ 0x06, 0x95 }, /* Brightness */
+	{ 0x07, 0x2d }, /* Sharpness */
+	{ 0x0c, 0x20 },
+	{ 0x0d, 0x20 },
+	{ 0x0e, 0x20 },
+	{ 0x0f, 0x05 },
+	{ 0x10, 0x9a },
+	{ 0x11, 0x00 }, /* Pixel clock = fastest */
+	{ 0x12, 0x24 }, /* Enable AGC and AWB */
+	{ 0x13, 0x21 },
+	{ 0x14, 0x80 },
+	{ 0x15, 0x01 },
+	{ 0x16, 0x03 },
+	{ 0x17, 0x38 },
+	{ 0x18, 0xea },
+	{ 0x19, 0x04 },
+	{ 0x1a, 0x93 },
+	{ 0x1b, 0x00 },
+	{ 0x1e, 0xc4 },
+	{ 0x1f, 0x04 },
+	{ 0x20, 0x20 },
+	{ 0x21, 0x10 },
+	{ 0x22, 0x88 },
+	{ 0x23, 0xc0 }, /* Crystal circuit power level */
+	{ 0x25, 0x9a }, /* Increase AEC black ratio */
+	{ 0x26, 0xb2 }, /* BLC enable */
+	{ 0x27, 0xa2 },
+	{ 0x28, 0x00 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x84 }, /* 60 Hz power */
+	{ 0x2b, 0xa8 }, /* 60 Hz power */
+	{ 0x2c, 0xa0 },
+	{ 0x2d, 0x95 }, /* Enable auto-brightness */
+	{ 0x2e, 0x88 },
+	{ 0x33, 0x26 },
+	{ 0x34, 0x03 },
+	{ 0x36, 0x8f },
+	{ 0x37, 0x80 },
+	{ 0x38, 0x83 },
+	{ 0x39, 0x80 },
+	{ 0x3a, 0x0f },
+	{ 0x3b, 0x3c },
+	{ 0x3c, 0x1a },
+	{ 0x3d, 0x80 },
+	{ 0x3e, 0x80 },
+	{ 0x3f, 0x0e },
+	{ 0x40, 0x00 }, /* White bal */
+	{ 0x41, 0x00 }, /* White bal */
+	{ 0x42, 0x80 },
+	{ 0x43, 0x3f }, /* White bal */
+	{ 0x44, 0x80 },
+	{ 0x45, 0x20 },
+	{ 0x46, 0x20 },
+	{ 0x47, 0x80 },
+	{ 0x48, 0x7f },
+	{ 0x49, 0x00 },
+	{ 0x4a, 0x00 },
+	{ 0x4b, 0x80 },
+	{ 0x4c, 0xd0 },
+	{ 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
+	{ 0x4e, 0x40 },
+	{ 0x4f, 0x07 }, /* UV avg., col. killer: max */
+	{ 0x50, 0xff },
+	{ 0x54, 0x23 }, /* Max AGC gain: 18dB */
+	{ 0x55, 0xff },
+	{ 0x56, 0x12 },
+	{ 0x57, 0x81 },
+	{ 0x58, 0x75 },
+	{ 0x59, 0x01 }, /* AGC dark current comp.: +1 */
+	{ 0x5a, 0x2c },
+	{ 0x5b, 0x0f }, /* AWB chrominance levels */
+	{ 0x5c, 0x10 },
+	{ 0x3d, 0x80 },
+	{ 0x27, 0xa6 },
+	{ 0x12, 0x20 }, /* Toggle AWB */
+	{ 0x12, 0x24 },
+};
+
+/* Lawrence Glaister <lg@jfm.bc.ca> reports:
+ *
+ * Register 0x0f in the 7610 has the following effects:
+ *
+ * 0x85 (AEC method 1): Best overall, good contrast range
+ * 0x45 (AEC method 2): Very overexposed
+ * 0xa5 (spec sheet default): Ok, but the black level is
+ *	shifted resulting in loss of contrast
+ * 0x05 (old driver setting): very overexposed, too much
+ *	contrast
+ */
+static const struct ov_i2c_regvals norm_7610[] = {
+	{ 0x10, 0xff },
+	{ 0x16, 0x06 },
+	{ 0x28, 0x24 },
+	{ 0x2b, 0xac },
+	{ 0x12, 0x00 },
+	{ 0x38, 0x81 },
+	{ 0x28, 0x24 },	/* 0c */
+	{ 0x0f, 0x85 },	/* lg's setting */
+	{ 0x15, 0x01 },
+	{ 0x20, 0x1c },
+	{ 0x23, 0x2a },
+	{ 0x24, 0x10 },
+	{ 0x25, 0x8a },
+	{ 0x26, 0xa2 },
+	{ 0x27, 0xc2 },
+	{ 0x2a, 0x04 },
+	{ 0x2c, 0xfe },
+	{ 0x2d, 0x93 },
+	{ 0x30, 0x71 },
+	{ 0x31, 0x60 },
+	{ 0x32, 0x26 },
+	{ 0x33, 0x20 },
+	{ 0x34, 0x48 },
+	{ 0x12, 0x24 },
+	{ 0x11, 0x01 },
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+};
+
+static const struct ov_i2c_regvals norm_7620[] = {
+	{ 0x00, 0x00 },		/* gain */
+	{ 0x01, 0x80 },		/* blue gain */
+	{ 0x02, 0x80 },		/* red gain */
+	{ 0x03, 0xc0 },		/* OV7670_REG_VREF */
+	{ 0x06, 0x60 },
+	{ 0x07, 0x00 },
+	{ 0x0c, 0x24 },
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+	{ 0x11, 0x01 },
+	{ 0x12, 0x24 },
+	{ 0x13, 0x01 },
+	{ 0x14, 0x84 },
+	{ 0x15, 0x01 },
+	{ 0x16, 0x03 },
+	{ 0x17, 0x2f },
+	{ 0x18, 0xcf },
+	{ 0x19, 0x06 },
+	{ 0x1a, 0xf5 },
+	{ 0x1b, 0x00 },
+	{ 0x20, 0x18 },
+	{ 0x21, 0x80 },
+	{ 0x22, 0x80 },
+	{ 0x23, 0x00 },
+	{ 0x26, 0xa2 },
+	{ 0x27, 0xea },
+	{ 0x28, 0x20 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x10 },
+	{ 0x2b, 0x00 },
+	{ 0x2c, 0x88 },
+	{ 0x2d, 0x91 },
+	{ 0x2e, 0x80 },
+	{ 0x2f, 0x44 },
+	{ 0x60, 0x27 },
+	{ 0x61, 0x02 },
+	{ 0x62, 0x5f },
+	{ 0x63, 0xd5 },
+	{ 0x64, 0x57 },
+	{ 0x65, 0x83 },
+	{ 0x66, 0x55 },
+	{ 0x67, 0x92 },
+	{ 0x68, 0xcf },
+	{ 0x69, 0x76 },
+	{ 0x6a, 0x22 },
+	{ 0x6b, 0x00 },
+	{ 0x6c, 0x02 },
+	{ 0x6d, 0x44 },
+	{ 0x6e, 0x80 },
+	{ 0x6f, 0x1d },
+	{ 0x70, 0x8b },
+	{ 0x71, 0x00 },
+	{ 0x72, 0x14 },
+	{ 0x73, 0x54 },
+	{ 0x74, 0x00 },
+	{ 0x75, 0x8e },
+	{ 0x76, 0x00 },
+	{ 0x77, 0xff },
+	{ 0x78, 0x80 },
+	{ 0x79, 0x80 },
+	{ 0x7a, 0x80 },
+	{ 0x7b, 0xe2 },
+	{ 0x7c, 0x00 },
+};
+
+/* 7640 and 7648. The defaults should be OK for most registers. */
+static const struct ov_i2c_regvals norm_7640[] = {
+	{ 0x12, 0x80 },
+	{ 0x12, 0x14 },
+};
+
+/* 7670. Defaults taken from OmniVision provided data,
+*  as provided by Jonathan Corbet of OLPC		*/
+static const struct ov_i2c_regvals norm_7670[] = {
+	{ OV7670_REG_COM7, OV7670_COM7_RESET },
+	{ OV7670_REG_TSLB, 0x04 },		/* OV */
+	{ OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
+	{ OV7670_REG_CLKRC, 0x01 },
+/*
+ * Set the hardware window.  These values from OV don't entirely
+ * make sense - hstop is less than hstart.  But they work...
+ */
+	{ OV7670_REG_HSTART, 0x13 },
+	{ OV7670_REG_HSTOP, 0x01 },
+	{ OV7670_REG_HREF, 0xb6 },
+	{ OV7670_REG_VSTART, 0x02 },
+	{ OV7670_REG_VSTOP, 0x7a },
+	{ OV7670_REG_VREF, 0x0a },
+
+	{ OV7670_REG_COM3, 0 },
+	{ OV7670_REG_COM14, 0 },
+/* Mystery scaling numbers */
+	{ 0x70, 0x3a },
+	{ 0x71, 0x35 },
+	{ 0x72, 0x11 },
+	{ 0x73, 0xf0 },
+	{ 0xa2, 0x02 },
+/*	{ OV7670_REG_COM10, 0x0 }, */
+
+/* Gamma curve values */
+	{ 0x7a, 0x20 },
+	{ 0x7b, 0x10 },
+	{ 0x7c, 0x1e },
+	{ 0x7d, 0x35 },
+	{ 0x7e, 0x5a },
+	{ 0x7f, 0x69 },
+	{ 0x80, 0x76 },
+	{ 0x81, 0x80 },
+	{ 0x82, 0x88 },
+	{ 0x83, 0x8f },
+	{ 0x84, 0x96 },
+	{ 0x85, 0xa3 },
+	{ 0x86, 0xaf },
+	{ 0x87, 0xc4 },
+	{ 0x88, 0xd7 },
+	{ 0x89, 0xe8 },
+
+/* AGC and AEC parameters.  Note we start by disabling those features,
+   then turn them only after tweaking the values. */
+	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+			 | OV7670_COM8_AECSTEP
+			 | OV7670_COM8_BFILT },
+	{ OV7670_REG_GAIN, 0 },
+	{ OV7670_REG_AECH, 0 },
+	{ OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
+	{ OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
+	{ OV7670_REG_BD50MAX, 0x05 },
+	{ OV7670_REG_BD60MAX, 0x07 },
+	{ OV7670_REG_AEW, 0x95 },
+	{ OV7670_REG_AEB, 0x33 },
+	{ OV7670_REG_VPT, 0xe3 },
+	{ OV7670_REG_HAECC1, 0x78 },
+	{ OV7670_REG_HAECC2, 0x68 },
+	{ 0xa1, 0x03 }, /* magic */
+	{ OV7670_REG_HAECC3, 0xd8 },
+	{ OV7670_REG_HAECC4, 0xd8 },
+	{ OV7670_REG_HAECC5, 0xf0 },
+	{ OV7670_REG_HAECC6, 0x90 },
+	{ OV7670_REG_HAECC7, 0x94 },
+	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+			| OV7670_COM8_AECSTEP
+			| OV7670_COM8_BFILT
+			| OV7670_COM8_AGC
+			| OV7670_COM8_AEC },
+
+/* Almost all of these are magic "reserved" values.  */
+	{ OV7670_REG_COM5, 0x61 },
+	{ OV7670_REG_COM6, 0x4b },
+	{ 0x16, 0x02 },
+	{ OV7670_REG_MVFP, 0x07 },
+	{ 0x21, 0x02 },
+	{ 0x22, 0x91 },
+	{ 0x29, 0x07 },
+	{ 0x33, 0x0b },
+	{ 0x35, 0x0b },
+	{ 0x37, 0x1d },
+	{ 0x38, 0x71 },
+	{ 0x39, 0x2a },
+	{ OV7670_REG_COM12, 0x78 },
+	{ 0x4d, 0x40 },
+	{ 0x4e, 0x20 },
+	{ OV7670_REG_GFIX, 0 },
+	{ 0x6b, 0x4a },
+	{ 0x74, 0x10 },
+	{ 0x8d, 0x4f },
+	{ 0x8e, 0 },
+	{ 0x8f, 0 },
+	{ 0x90, 0 },
+	{ 0x91, 0 },
+	{ 0x96, 0 },
+	{ 0x9a, 0 },
+	{ 0xb0, 0x84 },
+	{ 0xb1, 0x0c },
+	{ 0xb2, 0x0e },
+	{ 0xb3, 0x82 },
+	{ 0xb8, 0x0a },
+
+/* More reserved magic, some of which tweaks white balance */
+	{ 0x43, 0x0a },
+	{ 0x44, 0xf0 },
+	{ 0x45, 0x34 },
+	{ 0x46, 0x58 },
+	{ 0x47, 0x28 },
+	{ 0x48, 0x3a },
+	{ 0x59, 0x88 },
+	{ 0x5a, 0x88 },
+	{ 0x5b, 0x44 },
+	{ 0x5c, 0x67 },
+	{ 0x5d, 0x49 },
+	{ 0x5e, 0x0e },
+	{ 0x6c, 0x0a },
+	{ 0x6d, 0x55 },
+	{ 0x6e, 0x11 },
+	{ 0x6f, 0x9f },
+					/* "9e for advance AWB" */
+	{ 0x6a, 0x40 },
+	{ OV7670_REG_BLUE, 0x40 },
+	{ OV7670_REG_RED, 0x60 },
+	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+			| OV7670_COM8_AECSTEP
+			| OV7670_COM8_BFILT
+			| OV7670_COM8_AGC
+			| OV7670_COM8_AEC
+			| OV7670_COM8_AWB },
+
+/* Matrix coefficients */
+	{ 0x4f, 0x80 },
+	{ 0x50, 0x80 },
+	{ 0x51, 0 },
+	{ 0x52, 0x22 },
+	{ 0x53, 0x5e },
+	{ 0x54, 0x80 },
+	{ 0x58, 0x9e },
+
+	{ OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
+	{ OV7670_REG_EDGE, 0 },
+	{ 0x75, 0x05 },
+	{ 0x76, 0xe1 },
+	{ 0x4c, 0 },
+	{ 0x77, 0x01 },
+	{ OV7670_REG_COM13, OV7670_COM13_GAMMA
+			  | OV7670_COM13_UVSAT
+			  | 2},		/* was 3 */
+	{ 0x4b, 0x09 },
+	{ 0xc9, 0x60 },
+	{ OV7670_REG_COM16, 0x38 },
+	{ 0x56, 0x40 },
+
+	{ 0x34, 0x11 },
+	{ OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
+	{ 0xa4, 0x88 },
+	{ 0x96, 0 },
+	{ 0x97, 0x30 },
+	{ 0x98, 0x20 },
+	{ 0x99, 0x30 },
+	{ 0x9a, 0x84 },
+	{ 0x9b, 0x29 },
+	{ 0x9c, 0x03 },
+	{ 0x9d, 0x4c },
+	{ 0x9e, 0x3f },
+	{ 0x78, 0x04 },
+
+/* Extra-weird stuff.  Some sort of multiplexor register */
+	{ 0x79, 0x01 },
+	{ 0xc8, 0xf0 },
+	{ 0x79, 0x0f },
+	{ 0xc8, 0x00 },
+	{ 0x79, 0x10 },
+	{ 0xc8, 0x7e },
+	{ 0x79, 0x0a },
+	{ 0xc8, 0x80 },
+	{ 0x79, 0x0b },
+	{ 0xc8, 0x01 },
+	{ 0x79, 0x0c },
+	{ 0xc8, 0x0f },
+	{ 0x79, 0x0d },
+	{ 0xc8, 0x20 },
+	{ 0x79, 0x09 },
+	{ 0xc8, 0x80 },
+	{ 0x79, 0x02 },
+	{ 0xc8, 0xc0 },
+	{ 0x79, 0x03 },
+	{ 0xc8, 0x40 },
+	{ 0x79, 0x05 },
+	{ 0xc8, 0x30 },
+	{ 0x79, 0x26 },
+};
+
+static const struct ov_i2c_regvals norm_8610[] = {
+	{ 0x12, 0x80 },
+	{ 0x00, 0x00 },
+	{ 0x01, 0x80 },
+	{ 0x02, 0x80 },
+	{ 0x03, 0xc0 },
+	{ 0x04, 0x30 },
+	{ 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */
+	{ 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */
+	{ 0x0a, 0x86 },
+	{ 0x0b, 0xb0 },
+	{ 0x0c, 0x20 },
+	{ 0x0d, 0x20 },
+	{ 0x11, 0x01 },
+	{ 0x12, 0x25 },
+	{ 0x13, 0x01 },
+	{ 0x14, 0x04 },
+	{ 0x15, 0x01 }, /* Lin and Win think different about UV order */
+	{ 0x16, 0x03 },
+	{ 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */
+	{ 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */
+	{ 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */
+	{ 0x1a, 0xf5 },
+	{ 0x1b, 0x00 },
+	{ 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */
+	{ 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */
+	{ 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */
+	{ 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */
+	{ 0x26, 0xa2 },
+	{ 0x27, 0xea },
+	{ 0x28, 0x00 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x80 },
+	{ 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */
+	{ 0x2c, 0xac },
+	{ 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */
+	{ 0x2e, 0x80 },
+	{ 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */
+	{ 0x4c, 0x00 },
+	{ 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */
+	{ 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */
+	{ 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */
+	{ 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
+	{ 0x63, 0xff },
+	{ 0x64, 0x53 }, /* new windrv 090403 says 0x57,
+			 * maybe thats wrong */
+	{ 0x65, 0x00 },
+	{ 0x66, 0x55 },
+	{ 0x67, 0xb0 },
+	{ 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */
+	{ 0x69, 0x02 },
+	{ 0x6a, 0x22 },
+	{ 0x6b, 0x00 },
+	{ 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but
+			 * deleting bit7 colors the first images red */
+	{ 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */
+	{ 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */
+	{ 0x6f, 0x01 },
+	{ 0x70, 0x8b },
+	{ 0x71, 0x00 },
+	{ 0x72, 0x14 },
+	{ 0x73, 0x54 },
+	{ 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */
+	{ 0x75, 0x0e },
+	{ 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */
+	{ 0x77, 0xff },
+	{ 0x78, 0x80 },
+	{ 0x79, 0x80 },
+	{ 0x7a, 0x80 },
+	{ 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */
+	{ 0x7c, 0x00 },
+	{ 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */
+	{ 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */
+	{ 0x7f, 0xfb },
+	{ 0x80, 0x28 },
+	{ 0x81, 0x00 },
+	{ 0x82, 0x23 },
+	{ 0x83, 0x0b },
+	{ 0x84, 0x00 },
+	{ 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */
+	{ 0x86, 0xc9 },
+	{ 0x87, 0x00 },
+	{ 0x88, 0x00 },
+	{ 0x89, 0x01 },
+	{ 0x12, 0x20 },
+	{ 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */
 };
 
 static unsigned char ov7670_abs_to_sm(unsigned char v)
@@ -499,19 +1060,6 @@ static int init_ov_sensor(struct sd *sd)
 	return 0;
 }
 
-/* Switch on standard JPEG compression. Returns 0 for success. */
-static int ov519_init_compression(struct sd *sd)
-{
-	if (!sd->compress_inited) {
-		if (reg_w_mask(sd, OV519_SYS_EN_CLK1, 1 << 2, 1 << 2) < 0) {
-			PDEBUG(D_ERR, "Error switching to compressed mode");
-			return -EIO;
-		}
-		sd->compress_inited = 1;
-	}
-	return 0;
-}
-
 /* Set the read and write slave IDs. The "slave" argument is the write slave,
  * and the read slave will be set to (slave + 1).
  * This should not be called from outside the i2c I/O functions.
@@ -525,18 +1073,10 @@ static int ov51x_set_slave_ids(struct sd *sd,
 	rc = reg_w(sd, R51x_I2C_W_SID, slave);
 	if (rc < 0)
 		return rc;
+	sd->primary_i2c_slave = slave;
 	return reg_w(sd, R51x_I2C_R_SID, slave + 1);
 }
 
-struct ov_regvals {
-	__u8 reg;
-	__u8 val;
-};
-struct ov_i2c_regvals {
-	__u8 reg;
-	__u8 val;
-};
-
 static int write_regvals(struct sd *sd,
 			 const struct ov_regvals *regvals,
 			 int n)
@@ -579,101 +1119,9 @@ static int write_i2c_regvals(struct sd *sd,
 static int ov8xx0_configure(struct sd *sd)
 {
 	int rc;
-	static const struct ov_i2c_regvals norm_8610[] = {
-		{ 0x12, 0x80 },
-		{ 0x00, 0x00 },
-		{ 0x01, 0x80 },
-		{ 0x02, 0x80 },
-		{ 0x03, 0xc0 },
-		{ 0x04, 0x30 },
-		{ 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */
-		{ 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */
-		{ 0x0a, 0x86 },
-		{ 0x0b, 0xb0 },
-		{ 0x0c, 0x20 },
-		{ 0x0d, 0x20 },
-		{ 0x11, 0x01 },
-		{ 0x12, 0x25 },
-		{ 0x13, 0x01 },
-		{ 0x14, 0x04 },
-		{ 0x15, 0x01 }, /* Lin and Win think different about UV order */
-		{ 0x16, 0x03 },
-		{ 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */
-		{ 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */
-		{ 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */
-		{ 0x1a, 0xf5 },
-		{ 0x1b, 0x00 },
-		{ 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */
-		{ 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */
-		{ 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */
-		{ 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */
-		{ 0x26, 0xa2 },
-		{ 0x27, 0xea },
-		{ 0x28, 0x00 },
-		{ 0x29, 0x00 },
-		{ 0x2a, 0x80 },
-		{ 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */
-		{ 0x2c, 0xac },
-		{ 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */
-		{ 0x2e, 0x80 },
-		{ 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */
-		{ 0x4c, 0x00 },
-		{ 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */
-		{ 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */
-		{ 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */
-		{ 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
-		{ 0x63, 0xff },
-		{ 0x64, 0x53 }, /* new windrv 090403 says 0x57,
-				 * maybe thats wrong */
-		{ 0x65, 0x00 },
-		{ 0x66, 0x55 },
-		{ 0x67, 0xb0 },
-		{ 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */
-		{ 0x69, 0x02 },
-		{ 0x6a, 0x22 },
-		{ 0x6b, 0x00 },
-		{ 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but
-				   deleting bit7 colors the first images red */
-		{ 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */
-		{ 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */
-		{ 0x6f, 0x01 },
-		{ 0x70, 0x8b },
-		{ 0x71, 0x00 },
-		{ 0x72, 0x14 },
-		{ 0x73, 0x54 },
-		{ 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */
-		{ 0x75, 0x0e },
-		{ 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */
-		{ 0x77, 0xff },
-		{ 0x78, 0x80 },
-		{ 0x79, 0x80 },
-		{ 0x7a, 0x80 },
-		{ 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */
-		{ 0x7c, 0x00 },
-		{ 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */
-		{ 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */
-		{ 0x7f, 0xfb },
-		{ 0x80, 0x28 },
-		{ 0x81, 0x00 },
-		{ 0x82, 0x23 },
-		{ 0x83, 0x0b },
-		{ 0x84, 0x00 },
-		{ 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */
-		{ 0x86, 0xc9 },
-		{ 0x87, 0x00 },
-		{ 0x88, 0x00 },
-		{ 0x89, 0x01 },
-		{ 0x12, 0x20 },
-		{ 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */
-	};
 
 	PDEBUG(D_PROBE, "starting ov8xx0 configuration");
 
-	if (init_ov_sensor(sd) < 0)
-		PDEBUG(D_ERR|D_PROBE, "Failed to read sensor ID");
-	else
-		PDEBUG(D_PROBE, "OV86x0 initialized");
-
 	/* Detect sensor (sub)type */
 	rc = i2c_r(sd, OV7610_REG_COM_I);
 	if (rc < 0) {
@@ -681,21 +1129,14 @@ static int ov8xx0_configure(struct sd *sd)
 		return -1;
 	}
 	if ((rc & 3) == 1) {
-		PDEBUG(D_PROBE, "Sensor is an OV8610");
 		sd->sensor = SEN_OV8610;
 	} else {
 		PDEBUG(D_ERR, "Unknown image sensor version: %d", rc & 3);
 		return -1;
 	}
-	PDEBUG(D_PROBE, "Writing 8610 registers");
-	if (write_i2c_regvals(sd,
-			norm_8610,
-			sizeof norm_8610 / sizeof norm_8610[0]))
-		return -1;
 
 	/* Set sensor-specific vars */
-	sd->maxwidth = 640;
-	sd->maxheight = 480;
+/*	sd->sif = 0;		already done */
 	return 0;
 }
 
@@ -706,280 +1147,9 @@ static int ov7xx0_configure(struct sd *sd)
 {
 	int rc, high, low;
 
-	/* Lawrence Glaister <lg@jfm.bc.ca> reports:
-	 *
-	 * Register 0x0f in the 7610 has the following effects:
-	 *
-	 * 0x85 (AEC method 1): Best overall, good contrast range
-	 * 0x45 (AEC method 2): Very overexposed
-	 * 0xa5 (spec sheet default): Ok, but the black level is
-	 *	shifted resulting in loss of contrast
-	 * 0x05 (old driver setting): very overexposed, too much
-	 *	contrast
-	 */
-	static const struct ov_i2c_regvals norm_7610[] = {
-		{ 0x10, 0xff },
-		{ 0x16, 0x06 },
-		{ 0x28, 0x24 },
-		{ 0x2b, 0xac },
-		{ 0x12, 0x00 },
-		{ 0x38, 0x81 },
-		{ 0x28, 0x24 },	/* 0c */
-		{ 0x0f, 0x85 },	/* lg's setting */
-		{ 0x15, 0x01 },
-		{ 0x20, 0x1c },
-		{ 0x23, 0x2a },
-		{ 0x24, 0x10 },
-		{ 0x25, 0x8a },
-		{ 0x26, 0xa2 },
-		{ 0x27, 0xc2 },
-		{ 0x2a, 0x04 },
-		{ 0x2c, 0xfe },
-		{ 0x2d, 0x93 },
-		{ 0x30, 0x71 },
-		{ 0x31, 0x60 },
-		{ 0x32, 0x26 },
-		{ 0x33, 0x20 },
-		{ 0x34, 0x48 },
-		{ 0x12, 0x24 },
-		{ 0x11, 0x01 },
-		{ 0x0c, 0x24 },
-		{ 0x0d, 0x24 },
-	};
-
-	static const struct ov_i2c_regvals norm_7620[] = {
-		{ 0x00, 0x00 },		/* gain */
-		{ 0x01, 0x80 },		/* blue gain */
-		{ 0x02, 0x80 },		/* red gain */
-		{ 0x03, 0xc0 },		/* OV7670_REG_VREF */
-		{ 0x06, 0x60 },
-		{ 0x07, 0x00 },
-		{ 0x0c, 0x24 },
-		{ 0x0c, 0x24 },
-		{ 0x0d, 0x24 },
-		{ 0x11, 0x01 },
-		{ 0x12, 0x24 },
-		{ 0x13, 0x01 },
-		{ 0x14, 0x84 },
-		{ 0x15, 0x01 },
-		{ 0x16, 0x03 },
-		{ 0x17, 0x2f },
-		{ 0x18, 0xcf },
-		{ 0x19, 0x06 },
-		{ 0x1a, 0xf5 },
-		{ 0x1b, 0x00 },
-		{ 0x20, 0x18 },
-		{ 0x21, 0x80 },
-		{ 0x22, 0x80 },
-		{ 0x23, 0x00 },
-		{ 0x26, 0xa2 },
-		{ 0x27, 0xea },
-		{ 0x28, 0x20 },
-		{ 0x29, 0x00 },
-		{ 0x2a, 0x10 },
-		{ 0x2b, 0x00 },
-		{ 0x2c, 0x88 },
-		{ 0x2d, 0x91 },
-		{ 0x2e, 0x80 },
-		{ 0x2f, 0x44 },
-		{ 0x60, 0x27 },
-		{ 0x61, 0x02 },
-		{ 0x62, 0x5f },
-		{ 0x63, 0xd5 },
-		{ 0x64, 0x57 },
-		{ 0x65, 0x83 },
-		{ 0x66, 0x55 },
-		{ 0x67, 0x92 },
-		{ 0x68, 0xcf },
-		{ 0x69, 0x76 },
-		{ 0x6a, 0x22 },
-		{ 0x6b, 0x00 },
-		{ 0x6c, 0x02 },
-		{ 0x6d, 0x44 },
-		{ 0x6e, 0x80 },
-		{ 0x6f, 0x1d },
-		{ 0x70, 0x8b },
-		{ 0x71, 0x00 },
-		{ 0x72, 0x14 },
-		{ 0x73, 0x54 },
-		{ 0x74, 0x00 },
-		{ 0x75, 0x8e },
-		{ 0x76, 0x00 },
-		{ 0x77, 0xff },
-		{ 0x78, 0x80 },
-		{ 0x79, 0x80 },
-		{ 0x7a, 0x80 },
-		{ 0x7b, 0xe2 },
-		{ 0x7c, 0x00 },
-	};
-
-	/* 7640 and 7648. The defaults should be OK for most registers. */
-	static const struct ov_i2c_regvals norm_7640[] = {
-		{ 0x12, 0x80 },
-		{ 0x12, 0x14 },
-	};
-
-	/* 7670. Defaults taken from OmniVision provided data,
-	*  as provided by Jonathan Corbet of OLPC		*/
-	static const struct ov_i2c_regvals norm_7670[] = {
-		{ OV7670_REG_COM7, OV7670_COM7_RESET },
-		{ OV7670_REG_TSLB, 0x04 },		/* OV */
-		{ OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
-		{ OV7670_REG_CLKRC, 0x1 },
-	/*
-	 * Set the hardware window.  These values from OV don't entirely
-	 * make sense - hstop is less than hstart.  But they work...
-	 */
-		{ OV7670_REG_HSTART, 0x13 },	{ OV7670_REG_HSTOP, 0x01 },
-		{ OV7670_REG_HREF, 0xb6 },	{ OV7670_REG_VSTART, 0x02 },
-		{ OV7670_REG_VSTOP, 0x7a },	{ OV7670_REG_VREF, 0x0a },
-
-		{ OV7670_REG_COM3, 0 },	{ OV7670_REG_COM14, 0 },
-	/* Mystery scaling numbers */
-		{ 0x70, 0x3a },		{ 0x71, 0x35 },
-		{ 0x72, 0x11 },		{ 0x73, 0xf0 },
-		{ 0xa2, 0x02 },
-/* jfm */
-/* { OV7670_REG_COM10, 0x0 }, */
-
-	/* Gamma curve values */
-		{ 0x7a, 0x20 },
-/* jfm:win 7b=1c */
-		{ 0x7b, 0x10 },
-/* jfm:win 7c=28 */
-		{ 0x7c, 0x1e },
-/* jfm:win 7d=3c */
-		{ 0x7d, 0x35 },
-		{ 0x7e, 0x5a },		{ 0x7f, 0x69 },
-		{ 0x80, 0x76 },		{ 0x81, 0x80 },
-		{ 0x82, 0x88 },		{ 0x83, 0x8f },
-		{ 0x84, 0x96 },		{ 0x85, 0xa3 },
-		{ 0x86, 0xaf },		{ 0x87, 0xc4 },
-		{ 0x88, 0xd7 },		{ 0x89, 0xe8 },
-
-	/* AGC and AEC parameters.  Note we start by disabling those features,
-	   then turn them only after tweaking the values. */
-		{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
-				 | OV7670_COM8_AECSTEP
-				 | OV7670_COM8_BFILT },
-		{ OV7670_REG_GAIN, 0 },	{ OV7670_REG_AECH, 0 },
-		{ OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
-/* jfm:win 14=38 */
-		{ OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
-		{ OV7670_REG_BD50MAX, 0x05 },	{ OV7670_REG_BD60MAX, 0x07 },
-		{ OV7670_REG_AEW, 0x95 },	{ OV7670_REG_AEB, 0x33 },
-		{ OV7670_REG_VPT, 0xe3 },	{ OV7670_REG_HAECC1, 0x78 },
-		{ OV7670_REG_HAECC2, 0x68 },
-/* jfm:win a1=0b */
-		{ 0xa1, 0x03 }, /* magic */
-		{ OV7670_REG_HAECC3, 0xd8 },	{ OV7670_REG_HAECC4, 0xd8 },
-		{ OV7670_REG_HAECC5, 0xf0 },	{ OV7670_REG_HAECC6, 0x90 },
-		{ OV7670_REG_HAECC7, 0x94 },
-		{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
-				| OV7670_COM8_AECSTEP
-				| OV7670_COM8_BFILT
-				| OV7670_COM8_AGC
-				| OV7670_COM8_AEC },
-
-	/* Almost all of these are magic "reserved" values.  */
-		{ OV7670_REG_COM5, 0x61 },	{ OV7670_REG_COM6, 0x4b },
-		{ 0x16, 0x02 },
-/* jfm */
-/*		{ OV7670_REG_MVFP, 0x07|OV7670_MVFP_MIRROR }, */
-		{ OV7670_REG_MVFP, 0x07 },
-		{ 0x21, 0x02 },		{ 0x22, 0x91 },
-		{ 0x29, 0x07 },		{ 0x33, 0x0b },
-		{ 0x35, 0x0b },		{ 0x37, 0x1d },
-		{ 0x38, 0x71 },		{ 0x39, 0x2a },
-		{ OV7670_REG_COM12, 0x78 },	{ 0x4d, 0x40 },
-		{ 0x4e, 0x20 },		{ OV7670_REG_GFIX, 0 },
-		{ 0x6b, 0x4a },		{ 0x74, 0x10 },
-		{ 0x8d, 0x4f },		{ 0x8e, 0 },
-		{ 0x8f, 0 },		{ 0x90, 0 },
-		{ 0x91, 0 },		{ 0x96, 0 },
-		{ 0x9a, 0 },		{ 0xb0, 0x84 },
-		{ 0xb1, 0x0c },		{ 0xb2, 0x0e },
-		{ 0xb3, 0x82 },		{ 0xb8, 0x0a },
-
-	/* More reserved magic, some of which tweaks white balance */
-		{ 0x43, 0x0a },		{ 0x44, 0xf0 },
-		{ 0x45, 0x34 },		{ 0x46, 0x58 },
-		{ 0x47, 0x28 },		{ 0x48, 0x3a },
-		{ 0x59, 0x88 },		{ 0x5a, 0x88 },
-		{ 0x5b, 0x44 },		{ 0x5c, 0x67 },
-		{ 0x5d, 0x49 },		{ 0x5e, 0x0e },
-		{ 0x6c, 0x0a },		{ 0x6d, 0x55 },
-		{ 0x6e, 0x11 },		{ 0x6f, 0x9f },
-						/* "9e for advance AWB" */
-		{ 0x6a, 0x40 },		{ OV7670_REG_BLUE, 0x40 },
-		{ OV7670_REG_RED, 0x60 },
-		{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
-				| OV7670_COM8_AECSTEP
-				| OV7670_COM8_BFILT
-				| OV7670_COM8_AGC
-				| OV7670_COM8_AEC
-				| OV7670_COM8_AWB },
-
-	/* Matrix coefficients */
-		{ 0x4f, 0x80 },		{ 0x50, 0x80 },
-		{ 0x51, 0 },		{ 0x52, 0x22 },
-		{ 0x53, 0x5e },		{ 0x54, 0x80 },
-		{ 0x58, 0x9e },
-
-		{ OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
-		{ OV7670_REG_EDGE, 0 },
-		{ 0x75, 0x05 },		{ 0x76, 0xe1 },
-		{ 0x4c, 0 },		{ 0x77, 0x01 },
-		{ OV7670_REG_COM13, 0xc3 },	{ 0x4b, 0x09 },
-		{ 0xc9, 0x60 },		{ OV7670_REG_COM16, 0x38 },
-		{ 0x56, 0x40 },
-
-		{ 0x34, 0x11 },
-		{ OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
-		{ 0xa4, 0x88 },		{ 0x96, 0 },
-		{ 0x97, 0x30 },		{ 0x98, 0x20 },
-		{ 0x99, 0x30 },		{ 0x9a, 0x84 },
-		{ 0x9b, 0x29 },		{ 0x9c, 0x03 },
-		{ 0x9d, 0x4c },		{ 0x9e, 0x3f },
-		{ 0x78, 0x04 },
-
-	/* Extra-weird stuff.  Some sort of multiplexor register */
-		{ 0x79, 0x01 },		{ 0xc8, 0xf0 },
-		{ 0x79, 0x0f },		{ 0xc8, 0x00 },
-		{ 0x79, 0x10 },		{ 0xc8, 0x7e },
-		{ 0x79, 0x0a },		{ 0xc8, 0x80 },
-		{ 0x79, 0x0b },		{ 0xc8, 0x01 },
-		{ 0x79, 0x0c },		{ 0xc8, 0x0f },
-		{ 0x79, 0x0d },		{ 0xc8, 0x20 },
-		{ 0x79, 0x09 },		{ 0xc8, 0x80 },
-		{ 0x79, 0x02 },		{ 0xc8, 0xc0 },
-		{ 0x79, 0x03 },		{ 0xc8, 0x40 },
-		{ 0x79, 0x05 },		{ 0xc8, 0x30 },
-		{ 0x79, 0x26 },
-
-	/* Format YUV422 */
-		{ OV7670_REG_COM7, OV7670_COM7_YUV },  /* Selects YUV mode */
-		{ OV7670_REG_RGB444, 0 },	/* No RGB444 please */
-		{ OV7670_REG_COM1, 0 },
-		{ OV7670_REG_COM15, OV7670_COM15_R00FF },
-		{ OV7670_REG_COM9, 0x18 },
-				/* 4x gain ceiling; 0x8 is reserved bit */
-		{ 0x4f, 0x80 }, 	/* "matrix coefficient 1" */
-		{ 0x50, 0x80 }, 	/* "matrix coefficient 2" */
-		{ 0x52, 0x22 }, 	/* "matrix coefficient 4" */
-		{ 0x53, 0x5e }, 	/* "matrix coefficient 5" */
-		{ 0x54, 0x80 }, 	/* "matrix coefficient 6" */
-		{ OV7670_REG_COM13, OV7670_COM13_GAMMA|OV7670_COM13_UVSAT },
-};
 
 	PDEBUG(D_PROBE, "starting OV7xx0 configuration");
 
-/* jfm:already done? */
-	if (init_ov_sensor(sd) < 0)
-		PDEBUG(D_ERR, "Failed to read sensor ID");
-	else
-		PDEBUG(D_PROBE, "OV7xx0 initialized");
-
 	/* Detect sensor (sub)type */
 	rc = i2c_r(sd, OV7610_REG_COM_I);
 
@@ -1025,20 +1195,26 @@ static int ov7xx0_configure(struct sd *sd)
 			return low;
 		}
 		if (high == 0x76) {
-			if (low == 0x30) {
+			switch (low) {
+			case 0x30:
 				PDEBUG(D_PROBE, "Sensor is an OV7630/OV7635");
-				sd->sensor = SEN_OV7630;
-			} else if (low == 0x40) {
+				PDEBUG(D_ERR,
+				      "7630 is not supported by this driver");
+				return -1;
+			case 0x40:
 				PDEBUG(D_PROBE, "Sensor is an OV7645");
 				sd->sensor = SEN_OV7640; /* FIXME */
-			} else if (low == 0x45) {
+				break;
+			case 0x45:
 				PDEBUG(D_PROBE, "Sensor is an OV7645B");
 				sd->sensor = SEN_OV7640; /* FIXME */
-			} else if (low == 0x48) {
+				break;
+			case 0x48:
 				PDEBUG(D_PROBE, "Sensor is an OV7648");
 				sd->sensor = SEN_OV7640; /* FIXME */
-			} else {
-				PDEBUG(D_PROBE, "Unknown sensor: 0x76%X", low);
+				break;
+			default:
+				PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
 				return -1;
 			}
 		} else {
@@ -1050,34 +1226,8 @@ static int ov7xx0_configure(struct sd *sd)
 		return -1;
 	}
 
-	if (sd->sensor == SEN_OV7620) {
-		PDEBUG(D_PROBE, "Writing 7620 registers");
-		if (write_i2c_regvals(sd, norm_7620,
-				sizeof norm_7620 / sizeof norm_7620[0]))
-			return -1;
-	} else if (sd->sensor == SEN_OV7630) {
-		PDEBUG(D_ERR, "7630 is not supported by this driver version");
-		return -1;
-	} else if (sd->sensor == SEN_OV7640) {
-		PDEBUG(D_PROBE, "Writing 7640 registers");
-		if (write_i2c_regvals(sd, norm_7640,
-				sizeof norm_7640 / sizeof norm_7640[0]))
-			return -1;
-	} else if (sd->sensor == SEN_OV7670) {
-		PDEBUG(D_PROBE, "Writing 7670 registers");
-		if (write_i2c_regvals(sd, norm_7670,
-				sizeof norm_7670 / sizeof norm_7670[0]))
-			return -1;
-	} else {
-		PDEBUG(D_PROBE, "Writing 7610 registers");
-		if (write_i2c_regvals(sd, norm_7610,
-				sizeof norm_7610 / sizeof norm_7610[0]))
-			return -1;
-	}
-
 	/* Set sensor-specific vars */
-	sd->maxwidth = 640;
-	sd->maxheight = 480;
+/*	sd->sif = 0;		already done */
 	return 0;
 }
 
@@ -1085,141 +1235,7 @@ static int ov7xx0_configure(struct sd *sd)
 static int ov6xx0_configure(struct sd *sd)
 {
 	int rc;
-	static const struct ov_i2c_regvals norm_6x20[] = {
-		{ 0x12, 0x80 }, /* reset */
-		{ 0x11, 0x01 },
-		{ 0x03, 0x60 },
-		{ 0x05, 0x7f }, /* For when autoadjust is off */
-		{ 0x07, 0xa8 },
-		/* The ratio of 0x0c and 0x0d  controls the white point */
-		{ 0x0c, 0x24 },
-		{ 0x0d, 0x24 },
-		{ 0x0f, 0x15 }, /* COMS */
-		{ 0x10, 0x75 }, /* AEC Exposure time */
-		{ 0x12, 0x24 }, /* Enable AGC */
-		{ 0x14, 0x04 },
-		/* 0x16: 0x06 helps frame stability with moving objects */
-		{ 0x16, 0x06 },
-/*		{ 0x20, 0x30 },  * Aperture correction enable */
-		{ 0x26, 0xb2 }, /* BLC enable */
-		/* 0x28: 0x05 Selects RGB format if RGB on */
-		{ 0x28, 0x05 },
-		{ 0x2a, 0x04 }, /* Disable framerate adjust */
-/*		{ 0x2b, 0xac },  * Framerate; Set 2a[7] first */
-		{ 0x2d, 0x99 },
-		{ 0x33, 0xa0 }, /* Color Processing Parameter */
-		{ 0x34, 0xd2 }, /* Max A/D range */
-		{ 0x38, 0x8b },
-		{ 0x39, 0x40 },
-
-		{ 0x3c, 0x39 }, /* Enable AEC mode changing */
-		{ 0x3c, 0x3c }, /* Change AEC mode */
-		{ 0x3c, 0x24 }, /* Disable AEC mode changing */
-
-		{ 0x3d, 0x80 },
-		/* These next two registers (0x4a, 0x4b) are undocumented.
-		 * They control the color balance */
-		{ 0x4a, 0x80 },
-		{ 0x4b, 0x80 },
-		{ 0x4d, 0xd2 }, /* This reduces noise a bit */
-		{ 0x4e, 0xc1 },
-		{ 0x4f, 0x04 },
-/* Do 50-53 have any effect? */
-/* Toggle 0x12[2] off and on here? */
-	};
-
-	static const struct ov_i2c_regvals norm_6x30[] = {
-		{ 0x12, 0x80 }, /* Reset */
-		{ 0x00, 0x1f }, /* Gain */
-		{ 0x01, 0x99 }, /* Blue gain */
-		{ 0x02, 0x7c }, /* Red gain */
-		{ 0x03, 0xc0 }, /* Saturation */
-		{ 0x05, 0x0a }, /* Contrast */
-		{ 0x06, 0x95 }, /* Brightness */
-		{ 0x07, 0x2d }, /* Sharpness */
-		{ 0x0c, 0x20 },
-		{ 0x0d, 0x20 },
-		{ 0x0e, 0x20 },
-		{ 0x0f, 0x05 },
-		{ 0x10, 0x9a },
-		{ 0x11, 0x00 }, /* Pixel clock = fastest */
-		{ 0x12, 0x24 }, /* Enable AGC and AWB */
-		{ 0x13, 0x21 },
-		{ 0x14, 0x80 },
-		{ 0x15, 0x01 },
-		{ 0x16, 0x03 },
-		{ 0x17, 0x38 },
-		{ 0x18, 0xea },
-		{ 0x19, 0x04 },
-		{ 0x1a, 0x93 },
-		{ 0x1b, 0x00 },
-		{ 0x1e, 0xc4 },
-		{ 0x1f, 0x04 },
-		{ 0x20, 0x20 },
-		{ 0x21, 0x10 },
-		{ 0x22, 0x88 },
-		{ 0x23, 0xc0 }, /* Crystal circuit power level */
-		{ 0x25, 0x9a }, /* Increase AEC black ratio */
-		{ 0x26, 0xb2 }, /* BLC enable */
-		{ 0x27, 0xa2 },
-		{ 0x28, 0x00 },
-		{ 0x29, 0x00 },
-		{ 0x2a, 0x84 }, /* 60 Hz power */
-		{ 0x2b, 0xa8 }, /* 60 Hz power */
-		{ 0x2c, 0xa0 },
-		{ 0x2d, 0x95 }, /* Enable auto-brightness */
-		{ 0x2e, 0x88 },
-		{ 0x33, 0x26 },
-		{ 0x34, 0x03 },
-		{ 0x36, 0x8f },
-		{ 0x37, 0x80 },
-		{ 0x38, 0x83 },
-		{ 0x39, 0x80 },
-		{ 0x3a, 0x0f },
-		{ 0x3b, 0x3c },
-		{ 0x3c, 0x1a },
-		{ 0x3d, 0x80 },
-		{ 0x3e, 0x80 },
-		{ 0x3f, 0x0e },
-		{ 0x40, 0x00 }, /* White bal */
-		{ 0x41, 0x00 }, /* White bal */
-		{ 0x42, 0x80 },
-		{ 0x43, 0x3f }, /* White bal */
-		{ 0x44, 0x80 },
-		{ 0x45, 0x20 },
-		{ 0x46, 0x20 },
-		{ 0x47, 0x80 },
-		{ 0x48, 0x7f },
-		{ 0x49, 0x00 },
-		{ 0x4a, 0x00 },
-		{ 0x4b, 0x80 },
-		{ 0x4c, 0xd0 },
-		{ 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
-		{ 0x4e, 0x40 },
-		{ 0x4f, 0x07 }, /* UV avg., col. killer: max */
-		{ 0x50, 0xff },
-		{ 0x54, 0x23 }, /* Max AGC gain: 18dB */
-		{ 0x55, 0xff },
-		{ 0x56, 0x12 },
-		{ 0x57, 0x81 },
-		{ 0x58, 0x75 },
-		{ 0x59, 0x01 }, /* AGC dark current comp.: +1 */
-		{ 0x5a, 0x2c },
-		{ 0x5b, 0x0f }, /* AWB chrominance levels */
-		{ 0x5c, 0x10 },
-		{ 0x3d, 0x80 },
-		{ 0x27, 0xa6 },
-		{ 0x12, 0x20 }, /* Toggle AWB */
-		{ 0x12, 0x24 },
-	};
-
-	PDEBUG(D_PROBE, "starting sensor configuration");
-
-	if (init_ov_sensor(sd) < 0) {
-		PDEBUG(D_ERR, "Failed to read sensor ID.");
-		return -1;
-	}
-	PDEBUG(D_PROBE, "OV6xx0 sensor detected");
+	PDEBUG(D_PROBE, "starting OV6xx0 configuration");
 
 	/* Detect sensor (sub)type */
 	rc = i2c_r(sd, OV7610_REG_COM_I);
@@ -1231,59 +1247,46 @@ static int ov6xx0_configure(struct sd *sd)
 	/* Ugh. The first two bits are the version bits, but
 	 * the entire register value must be used. I guess OVT
 	 * underestimated how many variants they would make. */
-	if (rc == 0x00) {
+	switch (rc) {
+	case 0x00:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_ERR,
 			"WARNING: Sensor is an OV66308. Your camera may have");
 		PDEBUG(D_ERR, "been misdetected in previous driver versions.");
-	} else if (rc == 0x01) {
+		break;
+	case 0x01:
 		sd->sensor = SEN_OV6620;
-		PDEBUG(D_PROBE, "Sensor is an OV6620");
-	} else if (rc == 0x02) {
+		break;
+	case 0x02:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_PROBE, "Sensor is an OV66308AE");
-	} else if (rc == 0x03) {
+		break;
+	case 0x03:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_PROBE, "Sensor is an OV66308AF");
-	} else if (rc == 0x90) {
+		break;
+	case 0x90:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_ERR,
 			"WARNING: Sensor is an OV66307. Your camera may have");
 		PDEBUG(D_ERR, "been misdetected in previous driver versions.");
-	} else {
+		break;
+	default:
 		PDEBUG(D_ERR, "FATAL: Unknown sensor version: 0x%02x", rc);
 		return -1;
 	}
 
 	/* Set sensor-specific vars */
-	sd->maxwidth = 352;
-	sd->maxheight = 288;
+	sd->sif = 1;
 
-	if (sd->sensor == SEN_OV6620) {
-		PDEBUG(D_PROBE, "Writing 6x20 registers");
-		if (write_i2c_regvals(sd, norm_6x20,
-				sizeof norm_6x20 / sizeof norm_6x20[0]))
-			return -1;
-	} else {
-		PDEBUG(D_PROBE, "Writing 6x30 registers");
-		if (write_i2c_regvals(sd, norm_6x30,
-				sizeof norm_6x30 / sizeof norm_6x30[0]))
-			return -1;
-	}
 	return 0;
 }
 
 /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
 static void ov51x_led_control(struct sd *sd, int on)
 {
-	PDEBUG(D_STREAM, "LED (%s)", on ? "on" : "off");
-
-/*	if (sd->bridge == BRG_OV511PLUS) */
-/*		reg_w(sd, R511_SYS_LED_CTL, on ? 1 : 0); */
-/*	else if (sd->bridge == BRG_OV519) */
-		reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1);	/* 0 / 1 */
-/*	else if (sd->bclass == BCL_OV518) */
-/*		reg_w_mask(sd, R518_GPIO_OUT, on ? 0x02 : 0x00, 0x02); */
+/*	PDEBUG(D_STREAM, "LED (%s)", on ? "on" : "off"); */
+	reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1);	/* 0 / 1 */
 }
 
 /* this function is called at probe time */
@@ -1293,11 +1296,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 
-/* (from ov519_configure) */
 	static const struct ov_regvals init_519[] = {
 		{ 0x5a,  0x6d }, /* EnableSystem */
-/* jfm trace usbsnoop3-1.txt */
-/* jfm 53 = fb */
 		{ 0x53,  0x9b },
 		{ 0x54,  0xff }, /* set bit2 to enable jpeg */
 		{ 0x5d,  0x03 },
@@ -1314,28 +1314,34 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	if (write_regvals(sd, init_519, ARRAY_SIZE(init_519)))
 		goto error;
-/* jfm: not seen in windows trace */
-	if (ov519_init_compression(sd))
-		goto error;
 	ov51x_led_control(sd, 0);	/* turn LED off */
 
 	/* Test for 76xx */
-	sd->primary_i2c_slave = OV7xx0_SID;
 	if (ov51x_set_slave_ids(sd, OV7xx0_SID) < 0)
 		goto error;
 
 	/* The OV519 must be more aggressive about sensor detection since
 	 * I2C write will never fail if the sensor is not present. We have
 	 * to try to initialize the sensor to detect its presence */
-	if (init_ov_sensor(sd) < 0) {
+	if (init_ov_sensor(sd) >= 0) {
+		if (ov7xx0_configure(sd) < 0) {
+			PDEBUG(D_ERR, "Failed to configure OV7xx0");
+			goto error;
+		}
+	} else {
+
 		/* Test for 6xx0 */
-		sd->primary_i2c_slave = OV6xx0_SID;
 		if (ov51x_set_slave_ids(sd, OV6xx0_SID) < 0)
 			goto error;
 
-		if (init_ov_sensor(sd) < 0) {
+		if (init_ov_sensor(sd) >= 0) {
+			if (ov6xx0_configure(sd) < 0) {
+				PDEBUG(D_ERR, "Failed to configure OV6xx0");
+				goto error;
+			}
+		} else {
+
 			/* Test for 8xx0 */
-			sd->primary_i2c_slave = OV8xx0_SID;
 			if (ov51x_set_slave_ids(sd, OV8xx0_SID) < 0)
 				goto error;
 
@@ -1343,47 +1349,76 @@ static int sd_config(struct gspca_dev *gspca_dev,
 				PDEBUG(D_ERR,
 					"Can't determine sensor slave IDs");
 				goto error;
-			} else {
-				if (ov8xx0_configure(sd) < 0) {
-					PDEBUG(D_ERR,
-					   "Failed to configure OV8xx0 sensor");
-					goto error;
-				}
 			}
-		} else {
-			if (ov6xx0_configure(sd) < 0) {
-				PDEBUG(D_ERR, "Failed to configure OV6xx0");
+			if (ov8xx0_configure(sd) < 0) {
+				PDEBUG(D_ERR,
+				   "Failed to configure OV8xx0 sensor");
 				goto error;
 			}
 		}
-	} else {
-		if (ov7xx0_configure(sd) < 0) {
-			PDEBUG(D_ERR, "Failed to configure OV7xx0");
-			goto error;
-		}
 	}
 
 	cam = &gspca_dev->cam;
 	cam->epaddr = OV511_ENDPOINT_ADDRESS;
-	if (sd->maxwidth == 640) {
+	if (!sd->sif) {
 		cam->cam_mode = vga_mode;
-		cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
+		cam->nmodes = ARRAY_SIZE(vga_mode);
 	} else {
 		cam->cam_mode = sif_mode;
-		cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
+		cam->nmodes = ARRAY_SIZE(sif_mode);
 	}
-	sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value;
-	sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value;
-	sd->colors = sd_ctrls[SD_COLOR].qctrl.default_value;
+	sd->brightness = BRIGHTNESS_DEF;
+	sd->contrast = CONTRAST_DEF;
+	sd->colors = COLOR_DEF;
+	sd->hflip = HFLIP_DEF;
+	sd->vflip = VFLIP_DEF;
+	if (sd->sensor != SEN_OV7670)
+		gspca_dev->ctrl_dis = (1 << HFLIP_IDX)
+					| (1 << VFLIP_IDX);
 	return 0;
 error:
 	PDEBUG(D_ERR, "OV519 Config failed");
 	return -EBUSY;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	/* initialize the sensor */
+	switch (sd->sensor) {
+	case SEN_OV6620:
+		if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
+			return -EIO;
+		break;
+	case SEN_OV6630:
+		if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
+			return -EIO;
+		break;
+	default:
+/*	case SEN_OV7610: */
+/*	case SEN_OV76BE: */
+		if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
+			return -EIO;
+		break;
+	case SEN_OV7620:
+		if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
+			return -EIO;
+		break;
+	case SEN_OV7640:
+		if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
+			return -EIO;
+		break;
+	case SEN_OV7670:
+		if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
+			return -EIO;
+		break;
+	case SEN_OV8610:
+		if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
+			return -EIO;
+		break;
+	}
 	return 0;
 }
 
@@ -1394,8 +1429,7 @@ static int sd_open(struct gspca_dev *gspca_dev)
  *
  * Do not put any sensor-specific code in here (including I2C I/O functions)
  */
-static int ov519_mode_init_regs(struct sd *sd,
-				int width, int height)
+static int ov519_mode_init_regs(struct sd *sd)
 {
 	static const struct ov_regvals mode_init_519_ov7670[] = {
 		{ 0x5d,	0x03 }, /* Turn off suspend mode */
@@ -1441,36 +1475,23 @@ static int ov519_mode_init_regs(struct sd *sd,
 		/* windows reads 0x55 at this point, why? */
 	};
 
-/* int hi_res; */
-
-	PDEBUG(D_CONF, "mode init %dx%d", width, height);
-
-/*	if (width >= 800 && height >= 600)
-		hi_res = 1;
-	else
-		hi_res = 0; */
-
-/*	if (ov51x_stop(sd) < 0)
-		return -EIO; */
-
 	/******** Set the mode ********/
 	if (sd->sensor != SEN_OV7670) {
 		if (write_regvals(sd, mode_init_519,
 				  ARRAY_SIZE(mode_init_519)))
 			return -EIO;
+		if (sd->sensor == SEN_OV7640) {
+			/* Select 8-bit input mode */
+			reg_w_mask(sd, OV519_CAM_DFR, 0x10, 0x10);
+		}
 	} else {
 		if (write_regvals(sd, mode_init_519_ov7670,
 				  ARRAY_SIZE(mode_init_519_ov7670)))
 			return -EIO;
 	}
 
-	if (sd->sensor == SEN_OV7640) {
-		/* Select 8-bit input mode */
-		reg_w_mask(sd, OV519_CAM_DFR, 0x10, 0x10);
-	}
-
-	reg_w(sd, OV519_CAM_H_SIZE,	width >> 4);
-	reg_w(sd, OV519_CAM_V_SIZE,	height >> 3);
+	reg_w(sd, OV519_CAM_H_SIZE,	sd->gspca_dev.width >> 4);
+	reg_w(sd, OV519_CAM_V_SIZE,	sd->gspca_dev.height >> 3);
 	reg_w(sd, OV519_CAM_X_OFFSETL,	0x00);
 	reg_w(sd, OV519_CAM_X_OFFSETH,	0x00);
 	reg_w(sd, OV519_CAM_Y_OFFSETL,	0x00);
@@ -1485,9 +1506,10 @@ static int ov519_mode_init_regs(struct sd *sd,
 
 /* FIXME: These are only valid at the max resolution. */
 	sd->clockdiv = 0;
-	if (sd->sensor == SEN_OV7640) {
+	switch (sd->sensor) {
+	case SEN_OV7640:
 		switch (sd->frame_rate) {
-/*jfm: default was 30 fps */
+/*fixme: default was 30 fps */
 		case 30:
 			reg_w(sd, 0xa4, 0x0c);
 			reg_w(sd, 0x23, 0xff);
@@ -1517,7 +1539,8 @@ static int ov519_mode_init_regs(struct sd *sd,
 			sd->clockdiv = 1;
 			break;
 		}
-	} else if (sd->sensor == SEN_OV8610) {
+		break;
+	case SEN_OV8610:
 		switch (sd->frame_rate) {
 		default:	/* 15 fps */
 /*		case 15: */
@@ -1533,41 +1556,37 @@ static int ov519_mode_init_regs(struct sd *sd,
 			reg_w(sd, 0x23, 0x1b);
 			break;
 		}
-		sd->clockdiv = 0;
-	} else if (sd->sensor == SEN_OV7670) { /* guesses, based on 7640 */
+		break;
+	case SEN_OV7670:		/* guesses, based on 7640 */
 		PDEBUG(D_STREAM, "Setting framerate to %d fps",
 				 (sd->frame_rate == 0) ? 15 : sd->frame_rate);
+		reg_w(sd, 0xa4, 0x10);
 		switch (sd->frame_rate) {
 		case 30:
-			reg_w(sd, 0xa4, 0x10);
 			reg_w(sd, 0x23, 0xff);
 			break;
 		case 20:
-			reg_w(sd, 0xa4, 0x10);
 			reg_w(sd, 0x23, 0x1b);
 			break;
-		default: /* 15 fps */
-/*			case 15: */
-			reg_w(sd, 0xa4, 0x10);
+		default:
+/*		case 15: */
 			reg_w(sd, 0x23, 0xff);
 			sd->clockdiv = 1;
 			break;
 		}
+		break;
 	}
 
-/*	if (ov51x_restart(sd) < 0)
-		return -EIO; */
-
-	/* Reset it just for good measure */
-/*	if (ov51x_reset(sd, OV511_RESET_NOREGS) < 0)
-		return -EIO; */
 	return 0;
 }
 
-static int mode_init_ov_sensor_regs(struct sd *sd,
-				struct ovsensor_window *win)
+static int mode_init_ov_sensor_regs(struct sd *sd)
 {
-	int qvga = win->quarter;
+	struct gspca_dev *gspca_dev;
+	int qvga;
+
+	gspca_dev = &sd->gspca_dev;
+	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
 
 	/******** Mode (VGA/QVGA) and sensor specific regs ********/
 	switch (sd->sensor) {
@@ -1611,8 +1630,6 @@ static int mode_init_ov_sensor_regs(struct sd *sd,
 			 OV7670_COM7_FMT_MASK);
 		break;
 	case SEN_OV6620:
-		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
-		break;
 	case SEN_OV6630:
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		break;
@@ -1621,24 +1638,21 @@ static int mode_init_ov_sensor_regs(struct sd *sd,
 	}
 
 	/******** Palette-specific regs ********/
-/* Need to do work here for the OV7670 */
-
-		if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) {
-			/* not valid on the OV6620/OV7620/6630? */
-			i2c_w_mask(sd, 0x0e, 0x00, 0x40);
-		}
+	if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) {
+		/* not valid on the OV6620/OV7620/6630? */
+		i2c_w_mask(sd, 0x0e, 0x00, 0x40);
+	}
 
-		/* The OV518 needs special treatment. Although both the OV518
-		 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
-		 * bus is actually used. The UV bus is tied to ground.
-		 * Therefore, the OV6630 needs to be in 8-bit multiplexed
-		 * output mode */
+	/* The OV518 needs special treatment. Although both the OV518
+	 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
+	 * bus is actually used. The UV bus is tied to ground.
+	 * Therefore, the OV6630 needs to be in 8-bit multiplexed
+	 * output mode */
 
-		/* OV7640 is 8-bit only */
+	/* OV7640 is 8-bit only */
 
-		if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640)
-			i2c_w_mask(sd, 0x13, 0x00, 0x20);
-/*	} */
+	if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640)
+		i2c_w_mask(sd, 0x13, 0x00, 0x20);
 
 	/******** Clock programming ********/
 	/* The OV6620 needs special handling. This prevents the
@@ -1647,14 +1661,14 @@ static int mode_init_ov_sensor_regs(struct sd *sd,
 
 		/* Clock down */
 		i2c_w(sd, 0x2a, 0x04);
-		i2c_w(sd, 0x11, win->clockdiv);
+		i2c_w(sd, 0x11, sd->clockdiv);
 		i2c_w(sd, 0x2a, 0x84);
 		/* This next setting is critical. It seems to improve
 		 * the gain or the contrast. The "reserved" bits seem
 		 * to have some effect in this case. */
 		i2c_w(sd, 0x2d, 0x85);
-	} else if (win->clockdiv >= 0) {
-		i2c_w(sd, 0x11, win->clockdiv);
+	} else if (sd->clockdiv >= 0) {
+		i2c_w(sd, 0x11, sd->clockdiv);
 	}
 
 	/******** Special Features ********/
@@ -1674,7 +1688,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd,
 	/* is fully tested. */
 	/* 7620/6620/6630? don't have register 0x35, so play it safe */
 	if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) {
-		if (win->width == 640 /*&& win->height == 480*/)
+		if (!qvga)
 			i2c_w(sd, 0x35, 0x9e);
 		else
 			i2c_w(sd, 0x35, 0x1e);
@@ -1682,13 +1696,31 @@ static int mode_init_ov_sensor_regs(struct sd *sd,
 	return 0;
 }
 
-static int set_ov_sensor_window(struct sd *sd,
-				struct ovsensor_window *win)
+static void sethvflip(struct sd *sd)
+{
+	if (sd->sensor != SEN_OV7670)
+		return;
+	if (sd->gspca_dev.streaming)
+		ov51x_stop(sd);
+	i2c_w_mask(sd, OV7670_REG_MVFP,
+		OV7670_MVFP_MIRROR * sd->hflip
+			| OV7670_MVFP_VFLIP * sd->vflip,
+		OV7670_MVFP_MIRROR | OV7670_MVFP_VFLIP);
+	if (sd->gspca_dev.streaming)
+		ov51x_restart(sd);
+}
+
+static int set_ov_sensor_window(struct sd *sd)
 {
+	struct gspca_dev *gspca_dev;
+	int qvga;
 	int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale;
 	int ret, hstart, hstop, vstop, vstart;
 	__u8 v;
 
+	gspca_dev = &sd->gspca_dev;
+	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+
 	/* The different sensor ICs handle setting up of window differently.
 	 * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */
 	switch (sd->sensor) {
@@ -1733,7 +1765,7 @@ static int set_ov_sensor_window(struct sd *sd,
 	switch (sd->sensor) {
 	case SEN_OV6620:
 	case SEN_OV6630:
-		if (win->quarter) {	/* QCIF */
+		if (qvga) {		/* QCIF */
 			hwscale = 0;
 			vwscale = 0;
 		} else {		/* CIF */
@@ -1743,7 +1775,7 @@ static int set_ov_sensor_window(struct sd *sd,
 		}
 		break;
 	case SEN_OV8610:
-		if (win->quarter) {	/* QSVGA */
+		if (qvga) {		/* QSVGA */
 			hwscale = 1;
 			vwscale = 1;
 		} else {		/* SVGA */
@@ -1752,7 +1784,7 @@ static int set_ov_sensor_window(struct sd *sd,
 		}
 		break;
 	default:			/* SEN_OV7xx0 */
-		if (win->quarter) {	/* QVGA */
+		if (qvga) {		/* QVGA */
 			hwscale = 1;
 			vwscale = 0;
 		} else {		/* VGA */
@@ -1761,7 +1793,7 @@ static int set_ov_sensor_window(struct sd *sd,
 		}
 	}
 
-	ret = mode_init_ov_sensor_regs(sd, win);
+	ret = mode_init_ov_sensor_regs(sd);
 	if (ret < 0)
 		return ret;
 
@@ -1782,7 +1814,7 @@ static int set_ov_sensor_window(struct sd *sd,
 	/* I can hard code this for OV7670s */
 	/* Yes, these numbers do look odd, but they're tested and work! */
 	if (sd->sensor == SEN_OV7670) {
-		if (win->quarter) {	/* QVGA from ov7670.c by
+		if (qvga) {		/* QVGA from ov7670.c by
 					 * Jonathan Corbet */
 			hstart = 164;
 			hstop = 20;
@@ -1796,75 +1828,45 @@ static int set_ov_sensor_window(struct sd *sd,
 		}
 		/* OV7670 hardware window registers are split across
 		 * multiple locations */
-		i2c_w(sd, OV7670_REG_HSTART, (hstart >> 3) & 0xff);
-		i2c_w(sd, OV7670_REG_HSTOP, (hstop >> 3) & 0xff);
+		i2c_w(sd, OV7670_REG_HSTART, hstart >> 3);
+		i2c_w(sd, OV7670_REG_HSTOP, hstop >> 3);
 		v = i2c_r(sd, OV7670_REG_HREF);
 		v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x07);
 		msleep(10);	/* need to sleep between read and write to
 				 * same reg! */
 		i2c_w(sd, OV7670_REG_HREF, v);
 
-		i2c_w(sd, OV7670_REG_VSTART, (vstart >> 2) & 0xff);
-		i2c_w(sd, OV7670_REG_VSTOP, (vstop >> 2) & 0xff);
+		i2c_w(sd, OV7670_REG_VSTART, vstart >> 2);
+		i2c_w(sd, OV7670_REG_VSTOP, vstop >> 2);
 		v = i2c_r(sd, OV7670_REG_VREF);
 		v = (v & 0xc0) | ((vstop & 0x3) << 2) | (vstart & 0x03);
 		msleep(10);	/* need to sleep between read and write to
 				 * same reg! */
 		i2c_w(sd, OV7670_REG_VREF, v);
-
+		sethvflip(sd);
 	} else {
-		i2c_w(sd, 0x17, hwsbase + (win->x >> hwscale));
-		i2c_w(sd, 0x18, hwebase + ((win->x + win->width) >> hwscale));
-		i2c_w(sd, 0x19, vwsbase + (win->y >> vwscale));
-		i2c_w(sd, 0x1a, vwebase + ((win->y + win->height) >> vwscale));
+		i2c_w(sd, 0x17, hwsbase);
+		i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale));
+		i2c_w(sd, 0x19, vwsbase);
+		i2c_w(sd, 0x1a, vwebase + (sd->gspca_dev.height >> vwscale));
 	}
 	return 0;
 }
 
-static int ov_sensor_mode_setup(struct sd *sd,
-				int width, int height)
-{
-	struct ovsensor_window win;
-
-/*	win.format = mode; */
-
-	/* Unless subcapture is enabled,
-	 * center the image window and downsample
-	 * if possible to increase the field of view */
-	/* NOTE: OV518(+) and OV519 does downsampling on its own */
-	win.width = width;
-	win.height = height;
-	if (width == sd->maxwidth)
-		win.quarter = 0;
-	else
-		win.quarter = 1;
-
-	/* Center it */
-	win.x = (win.width - width) / 2;
-	win.y = (win.height - height) / 2;
-
-	/* Clock is determined by OV519 frame rate code */
-	win.clockdiv = sd->clockdiv;
-
-	PDEBUG(D_CONF, "Setting clock divider to %d", win.clockdiv);
-	return set_ov_sensor_window(sd, &win);
-}
-
 /* -- start the camera -- */
 static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int ret;
 
-
-	ret = ov519_mode_init_regs(sd, gspca_dev->width, gspca_dev->height);
+	ret = ov519_mode_init_regs(sd);
 	if (ret < 0)
 		goto out;
-	ret = ov_sensor_mode_setup(sd, gspca_dev->width, gspca_dev->height);
+	ret = set_ov_sensor_window(sd);
 	if (ret < 0)
 		goto out;
 
-	ret = ov51x_restart((struct sd *) gspca_dev);
+	ret = ov51x_restart(sd);
 	if (ret < 0)
 		goto out;
 	PDEBUG(D_STREAM, "camera started alt: 0x%02x", gspca_dev->alt);
@@ -1880,14 +1882,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	ov51x_led_control((struct sd *) gspca_dev, 0);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1938,12 +1932,10 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
-/*	int was_streaming; */
 
 	val = sd->brightness;
 	PDEBUG(D_CONF, "brightness:%d", val);
-/*	was_streaming = gspca_dev->streaming;
- *	if (was_streaming)
+/*	if (gspca_dev->streaming)
  *		ov51x_stop(sd); */
 	switch (sd->sensor) {
 	case SEN_OV8610:
@@ -1961,12 +1953,12 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 			i2c_w(sd, OV7610_REG_BRT, val);
 		break;
 	case SEN_OV7670:
-/*jfm - from windblows
+/*win trace
  *		i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_AEC); */
 		i2c_w(sd, OV7670_REG_BRIGHT, ov7670_abs_to_sm(val));
 		break;
 	}
-/*	if (was_streaming)
+/*	if (gspca_dev->streaming)
  *		ov51x_restart(sd); */
 }
 
@@ -1974,12 +1966,10 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
-/*	int was_streaming; */
 
 	val = sd->contrast;
 	PDEBUG(D_CONF, "contrast:%d", val);
-/*	was_streaming = gspca_dev->streaming;
-	if (was_streaming)
+/*	if (gspca_dev->streaming)
 		ov51x_stop(sd); */
 	switch (sd->sensor) {
 	case SEN_OV7610:
@@ -2016,7 +2006,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		i2c_w(sd, OV7670_REG_CONTRAS, val >> 1);
 		break;
 	}
-/*	if (was_streaming)
+/*	if (gspca_dev->streaming)
 		ov51x_restart(sd); */
 }
 
@@ -2024,12 +2014,10 @@ static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
-/*	int was_streaming; */
 
 	val = sd->colors;
 	PDEBUG(D_CONF, "saturation:%d", val);
-/*	was_streaming = gspca_dev->streaming;
-	if (was_streaming)
+/*	if (gspca_dev->streaming)
 		ov51x_stop(sd); */
 	switch (sd->sensor) {
 	case SEN_OV8610:
@@ -2055,7 +2043,7 @@ static void setcolors(struct gspca_dev *gspca_dev)
 		/* set REG_COM13 values for UV sat auto mode */
 		break;
 	}
-/*	if (was_streaming)
+/*	if (gspca_dev->streaming)
 		ov51x_restart(sd); */
 }
 
@@ -2110,17 +2098,49 @@ static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->hflip = val;
+	sethvflip(sd);
+	return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->hflip;
+	return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vflip = val;
+	sethvflip(sd);
+	return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->vflip;
+	return 0;
+}
+
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
@@ -2157,6 +2177,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
@@ -2178,4 +2202,3 @@ module_exit(sd_mod_exit);
 
 module_param(frame_rate, int, 0644);
 MODULE_PARM_DESC(frame_rate, "Frame rate (5, 10, 15, 20 or 30 fps)");
-
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index 7ef18d57881..83b5f740c94 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -56,12 +56,6 @@ MODULE_LICENSE("GPL");
 #define PAC207_GAIN_KNEE		20
 
 #define PAC207_AUTOGAIN_DEADZONE	30
-/* We calculating the autogain at the end of the transfer of a frame, at this
-   moment a frame with the old settings is being transmitted, and a frame is
-   being captured with the old settings. So if we adjust the autogain we must
-   ignore atleast the 2 next frames for the new settings to come into effect
-   before doing any other adjustments */
-#define PAC207_AUTOGAIN_IGNORE_FRAMES	3
 
 /* specific webcam descriptor */
 struct sd {
@@ -131,7 +125,8 @@ static struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 1,
 		.step	= 1,
-		.default_value = 1,
+#define AUTOGAIN_DEF 1
+		.default_value = AUTOGAIN_DEF,
 		.flags = 0,
 	    },
 	    .set = sd_setautogain,
@@ -181,9 +176,6 @@ static const __u8 pac207_sensor_init[][8] = {
 			/* 48 reg_72 Rate Control end BalSize_4a =0x36 */
 static const __u8 PacReg72[] = { 0x00, 0x00, 0x36, 0x00 };
 
-static const unsigned char pac207_sof_marker[5] =
-		{ 0xff, 0xff, 0x00, 0xff, 0x96 };
-
 static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index,
 	const u8 *buffer, u16 length)
 {
@@ -259,35 +251,32 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		return -ENODEV;
 	}
 
-	pac207_write_reg(gspca_dev, 0x41, 0x00);
-				/* Bit_0=Image Format,
-				 * Bit_1=LED,
-				 * Bit_2=Compression test mode enable */
-	pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
-	pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */
-
 	PDEBUG(D_PROBE,
 		"Pixart PAC207BCA Image Processor and Control Chip detected"
 		" (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x05;
 	cam->cam_mode = sif_mode;
 	cam->nmodes = ARRAY_SIZE(sif_mode);
 	sd->brightness = PAC207_BRIGHTNESS_DEFAULT;
 	sd->exposure = PAC207_EXPOSURE_DEFAULT;
 	sd->gain = PAC207_GAIN_DEFAULT;
+	sd->autogain = AUTOGAIN_DEF;
 
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
+	pac207_write_reg(gspca_dev, 0x41, 0x00);
+				/* Bit_0=Image Format,
+				 * Bit_1=LED,
+				 * Bit_2=Compression test mode enable */
+	pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
+	pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */
 
-	sd->autogain = 1;
 	return 0;
 }
 
@@ -343,14 +332,8 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
+/* Include pac common sof detection functions */
+#include "pac_common.h"
 
 static void pac207_do_auto_gain(struct gspca_dev *gspca_dev)
 {
@@ -365,33 +348,7 @@ static void pac207_do_auto_gain(struct gspca_dev *gspca_dev)
 	else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum,
 			100 + sd->brightness / 2, PAC207_AUTOGAIN_DEADZONE,
 			PAC207_GAIN_KNEE, PAC207_EXPOSURE_KNEE))
-		sd->autogain_ignore_frames = PAC207_AUTOGAIN_IGNORE_FRAMES;
-}
-
-static unsigned char *pac207_find_sof(struct gspca_dev *gspca_dev,
-					unsigned char *m, int len)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	int i;
-
-	/* Search for the SOF marker (fixed part) in the header */
-	for (i = 0; i < len; i++) {
-		if (m[i] == pac207_sof_marker[sd->sof_read]) {
-			sd->sof_read++;
-			if (sd->sof_read == sizeof(pac207_sof_marker)) {
-				PDEBUG(D_STREAM,
-					"SOF found, bytes to analyze: %u."
-					" Frame starts at byte #%u",
-					len, i + 1);
-				sd->sof_read = 0;
-				return m + i + 1;
-			}
-		} else {
-			sd->sof_read = 0;
-		}
-	}
-
-	return NULL;
+		sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
 }
 
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
@@ -402,14 +359,14 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	unsigned char *sof;
 
-	sof = pac207_find_sof(gspca_dev, data, len);
+	sof = pac_find_sof(gspca_dev, data, len);
 	if (sof) {
 		int n;
 
 		/* finish decoding current frame */
 		n = sof - data;
-		if (n > sizeof pac207_sof_marker)
-			n -= sizeof pac207_sof_marker;
+		if (n > sizeof pac_sof_marker)
+			n -= sizeof pac_sof_marker;
 		else
 			n = 0;
 		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
@@ -537,7 +494,7 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 		sd->gain = PAC207_GAIN_DEFAULT;
 		if (gspca_dev->streaming) {
 			sd->autogain_ignore_frames =
-				PAC207_AUTOGAIN_IGNORE_FRAMES;
+				PAC_AUTOGAIN_IGNORE_FRAMES;
 			setexposure(gspca_dev);
 			setgain(gspca_dev);
 		}
@@ -560,11 +517,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.dq_callback = pac207_do_auto_gain,
 	.pkt_scan = sd_pkt_scan,
 };
@@ -597,6 +552,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index ea3d7021f40..d4be5184328 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -19,6 +19,36 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
+/* Some documentation about various registers as determined by trial and error.
+   When the register addresses differ between the 7202 and the 7311 the 2
+   different addresses are written as 7302addr/7311addr, when one of the 2
+   addresses is a - sign that register description is not valid for the
+   matching IC.
+
+   Register page 1:
+
+   Address	Description
+   -/0x08	Unknown compressor related, must always be 8 except when not
+		in 640x480 resolution and page 4 reg 2 <= 3 then set it to 9 !
+   -/0x1b	Auto white balance related, bit 0 is AWB enable (inverted)
+		bits 345 seem to toggle per color gains on/off (inverted)
+   0x78		Global control, bit 6 controls the LED (inverted)
+   -/0x80	JPEG compression ratio ? Best not touched
+
+   Register page 3/4:
+
+   Address	Description
+   0x02		Clock divider 2-63, fps =~ 60 / val. Must be a multiple of 3 on
+		the 7302, so one of 3, 6, 9, ..., except when between 6 and 12?
+   -/0x0f	Master gain 1-245, low value = high gain
+   0x10/-	Master gain 0-31
+   -/0x10	Another gain 0-15, limited influence (1-2x gain I guess)
+   0x21		Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused
+   -/0x27	Seems to toggle various gains on / off, Setting bit 7 seems to
+		completely disable the analog amplification block. Set to 0x68
+		for max gain, 0x14 for minimal gain.
+*/
+
 #define MODULE_NAME "pac7311"
 
 #include "gspca.h"
@@ -31,16 +61,23 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
-	int avg_lum;
-
 	unsigned char brightness;
 	unsigned char contrast;
 	unsigned char colors;
+	unsigned char gain;
+	unsigned char exposure;
 	unsigned char autogain;
+	__u8 hflip;
+	__u8 vflip;
+
+	__u8 sensor;
+#define SENSOR_PAC7302 0
+#define SENSOR_PAC7311 1
+
+	u8 sof_read;
+	u8 autogain_ignore_frames;
 
-	char ffseq;
-	signed char ag_cnt;
-#define AG_CNT_START 13
+	atomic_t avg_lum;
 };
 
 /* V4L2 controls supported by the driver */
@@ -52,8 +89,18 @@ static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
+/* This control is pac7302 only */
+#define BRIGHTNESS_IDX 0
 	{
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
@@ -69,13 +116,15 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setbrightness,
 	    .get = sd_getbrightness,
 	},
+/* This control is for both the 7302 and the 7311 */
 	{
 	    {
 		.id      = V4L2_CID_CONTRAST,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
 		.name    = "Contrast",
 		.minimum = 0,
-		.maximum = 255,
+#define CONTRAST_MAX 255
+		.maximum = CONTRAST_MAX,
 		.step    = 1,
 #define CONTRAST_DEF 127
 		.default_value = CONTRAST_DEF,
@@ -83,13 +132,16 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setcontrast,
 	    .get = sd_getcontrast,
 	},
+/* This control is pac7302 only */
+#define SATURATION_IDX 2
 	{
 	    {
 		.id      = V4L2_CID_SATURATION,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
-		.name    = "Color",
+		.name    = "Saturation",
 		.minimum = 0,
-		.maximum = 255,
+#define COLOR_MAX 255
+		.maximum = COLOR_MAX,
 		.step    = 1,
 #define COLOR_DEF 127
 		.default_value = COLOR_DEF,
@@ -97,6 +149,39 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setcolors,
 	    .get = sd_getcolors,
 	},
+/* All controls below are for both the 7302 and the 7311 */
+	{
+	    {
+		.id      = V4L2_CID_GAIN,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Gain",
+		.minimum = 0,
+#define GAIN_MAX 255
+		.maximum = GAIN_MAX,
+		.step    = 1,
+#define GAIN_DEF 127
+#define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */
+		.default_value = GAIN_DEF,
+	    },
+	    .set = sd_setgain,
+	    .get = sd_getgain,
+	},
+	{
+	    {
+		.id      = V4L2_CID_EXPOSURE,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Exposure",
+		.minimum = 0,
+#define EXPOSURE_MAX 255
+		.maximum = EXPOSURE_MAX,
+		.step    = 1,
+#define EXPOSURE_DEF  16 /*  32 ms / 30 fps */
+#define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */
+		.default_value = EXPOSURE_DEF,
+	    },
+	    .set = sd_setexposure,
+	    .get = sd_getexposure,
+	},
 	{
 	    {
 		.id      = V4L2_CID_AUTOGAIN,
@@ -111,101 +196,207 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setautogain,
 	    .get = sd_getautogain,
 	},
+	{
+	    {
+		.id      = V4L2_CID_HFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Mirror",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define HFLIP_DEF 0
+		.default_value = HFLIP_DEF,
+	    },
+	    .set = sd_sethflip,
+	    .get = sd_gethflip,
+	},
+	{
+	    {
+		.id      = V4L2_CID_VFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Vflip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define VFLIP_DEF 0
+		.default_value = VFLIP_DEF,
+	    },
+	    .set = sd_setvflip,
+	    .get = sd_getvflip,
+	},
 };
 
 static struct v4l2_pix_format vga_mode[] = {
-	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+	{160, 120, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 160 * 120 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 2},
-	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+	{320, 240, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
-	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+	{640, 480, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
 
-#define PAC7311_JPEG_HEADER_SIZE (sizeof pac7311_jpeg_header)	/* (594) */
-
-static const __u8 pac7311_jpeg_header[] = {
-	0xff, 0xd8,
-	0xff, 0xe0, 0x00, 0x03, 0x20,
-	0xff, 0xc0, 0x00, 0x11, 0x08,
-		0x01, 0xe0,			/* 12: height */
-		0x02, 0x80,			/* 14: width */
-		0x03,				/* 16 */
-			0x01, 0x21, 0x00,
-			0x02, 0x11, 0x01,
-			0x03, 0x11, 0x01,
-	0xff, 0xdb, 0x00, 0x84,
-	0x00, 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, 0x0d,
-	0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, 0x1a, 0x18, 0x16,
-	0x16, 0x18, 0x31, 0x23, 0x25, 0x1d, 0x28, 0x3a, 0x33, 0x3d,
-	0x3c, 0x39, 0x33, 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40,
-	0x44, 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, 0x5f,
-	0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, 0x79, 0x70, 0x64,
-	0x78, 0x5c, 0x65, 0x67, 0x63, 0x01, 0x11, 0x12, 0x12, 0x18,
-	0x15, 0x18, 0x2f, 0x1a, 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42,
-	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
-	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
-	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
-	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
-	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
-	0xff, 0xc4, 0x01, 0xa2, 0x00, 0x00, 0x01, 0x05, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
-	0x09, 0x0a, 0x0b, 0x10, 0x00, 0x02, 0x01, 0x03, 0x03, 0x02,
-	0x04, 0x03, 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, 0x01, 0x7d,
-	0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, 0x21, 0x31,
-	0x41, 0x06, 0x13, 0x51, 0x61, 0x07, 0x22, 0x71, 0x14, 0x32,
-	0x81, 0x91, 0xa1, 0x08, 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52,
-	0xd1, 0xf0, 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16,
-	0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a,
-	0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44, 0x45,
-	0x46, 0x47, 0x48, 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57,
-	0x58, 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
-	0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x83,
-	0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94,
-	0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
-	0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
-	0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
-	0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8,
-	0xd9, 0xda, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8,
-	0xe9, 0xea, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
-	0xf9, 0xfa, 0x01, 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a,
-	0x0b, 0x11, 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
-	0x07, 0x05, 0x04, 0x04, 0x00, 0x01, 0x02, 0x77, 0x00, 0x01,
-	0x02, 0x03, 0x11, 0x04, 0x05, 0x21, 0x31, 0x06, 0x12, 0x41,
-	0x51, 0x07, 0x61, 0x71, 0x13, 0x22, 0x32, 0x81, 0x08, 0x14,
-	0x42, 0x91, 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0,
-	0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, 0xe1, 0x25,
-	0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, 0x27, 0x28, 0x29, 0x2a,
-	0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46,
-	0x47, 0x48, 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
-	0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a,
-	0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x82, 0x83,
-	0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94,
-	0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
-	0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
-	0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
-	0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8,
-	0xd9, 0xda, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9,
-	0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa,
-	0xff, 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03,
-	0x11, 0x00, 0x3f, 0x00
+/* pac 7302 */
+static const __u8 init_7302[] = {
+/*	index,value */
+	0xff, 0x01,		/* page 1 */
+	0x78, 0x00,		/* deactivate */
+	0xff, 0x01,
+	0x78, 0x40,		/* led off */
+};
+static const __u8 start_7302[] = {
+/*	index, len, [value]* */
+	0xff, 1,	0x00,		/* page 0 */
+	0x00, 12,	0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80,
+			0x00, 0x00, 0x00, 0x00,
+	0x0d, 24,	0x03, 0x01, 0x00, 0xb5, 0x07, 0xcb, 0x00, 0x00,
+			0x07, 0xc8, 0x00, 0xea, 0x07, 0xcf, 0x07, 0xf7,
+			0x07, 0x7e, 0x01, 0x0b, 0x00, 0x00, 0x00, 0x11,
+	0x26, 2,	0xaa, 0xaa,
+	0x2e, 1,	0x31,
+	0x38, 1,	0x01,
+	0x3a, 3,	0x14, 0xff, 0x5a,
+	0x43, 11,	0x00, 0x0a, 0x18, 0x11, 0x01, 0x2c, 0x88, 0x11,
+			0x00, 0x54, 0x11,
+	0x55, 1,	0x00,
+	0x62, 4, 	0x10, 0x1e, 0x1e, 0x18,
+	0x6b, 1,	0x00,
+	0x6e, 3,	0x08, 0x06, 0x00,
+	0x72, 3,	0x00, 0xff, 0x00,
+	0x7d, 23,	0x01, 0x01, 0x58, 0x46, 0x50, 0x3c, 0x50, 0x3c,
+			0x54, 0x46, 0x54, 0x56, 0x52, 0x50, 0x52, 0x50,
+			0x56, 0x64, 0xa4, 0x00, 0xda, 0x00, 0x00,
+	0xa2, 10,	0x22, 0x2c, 0x3c, 0x54, 0x69, 0x7c, 0x9c, 0xb9,
+			0xd2, 0xeb,
+	0xaf, 1,	0x02,
+	0xb5, 2,	0x08, 0x08,
+	0xb8, 2,	0x08, 0x88,
+	0xc4, 4,	0xae, 0x01, 0x04, 0x01,
+	0xcc, 1,	0x00,
+	0xd1, 11,	0x01, 0x30, 0x49, 0x5e, 0x6f, 0x7f, 0x8e, 0xa9,
+			0xc1, 0xd7, 0xec,
+	0xdc, 1,	0x01,
+	0xff, 1,	0x01,		/* page 1 */
+	0x12, 3,	0x02, 0x00, 0x01,
+	0x3e, 2,	0x00, 0x00,
+	0x76, 5,	0x01, 0x20, 0x40, 0x00, 0xf2,
+	0x7c, 1,	0x00,
+	0x7f, 10,	0x4b, 0x0f, 0x01, 0x2c, 0x02, 0x58, 0x03, 0x20,
+			0x02, 0x00,
+	0x96, 5,	0x01, 0x10, 0x04, 0x01, 0x04,
+	0xc8, 14,	0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
+			0x07, 0x00, 0x01, 0x07, 0x04, 0x01,
+	0xd8, 1,	0x01,
+	0xdb, 2,	0x00, 0x01,
+	0xde, 7,	0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00,
+	0xe6, 4,	0x00, 0x00, 0x00, 0x01,
+	0xeb, 1,	0x00,
+	0xff, 1,	0x02,		/* page 2 */
+	0x22, 1,	0x00,
+	0xff, 1,	0x03,		/* page 3 */
+	0x00, 255,			/* load the page 3 */
+	0x11, 1,	0x01,
+	0xff, 1,	0x02,		/* page 2 */
+	0x13, 1,	0x00,
+	0x22, 4,	0x1f, 0xa4, 0xf0, 0x96,
+	0x27, 2,	0x14, 0x0c,
+	0x2a, 5,	0xc8, 0x00, 0x18, 0x12, 0x22,
+	0x64, 8,	0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44,
+	0x6e, 1,	0x08,
+	0xff, 1,	0x01,		/* page 1 */
+	0x78, 1,	0x00,
+	0, 0				/* end of sequence */
+};
+
+/* page 3 - the value 0xaa says skip the index - see reg_w_page() */
+static const __u8 page3_7302[] = {
+	0x90, 0x40, 0x03, 0x50, 0xc2, 0x01, 0x14, 0x16,
+	0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00,
+	0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x47, 0x01, 0xb3, 0x01, 0x00,
+	0x00, 0x08, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x21,
+	0x00, 0x00, 0x00, 0x54, 0xf4, 0x02, 0x52, 0x54,
+	0xa4, 0xb8, 0xe0, 0x2a, 0xf6, 0x00, 0x00, 0x00,
+	0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0xfc, 0x00, 0xf2, 0x1f, 0x04, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0xc0, 0xc0, 0x10, 0x00, 0x00,
+	0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x40, 0xff, 0x03, 0x19, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0xc8, 0xc8, 0xc8,
+	0xc8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50,
+	0x08, 0x10, 0x24, 0x40, 0x00, 0x00, 0x00, 0x00,
+	0x01, 0x00, 0x02, 0x47, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x02, 0xfa, 0x00, 0x64, 0x5a, 0x28, 0x00,
+	0x00
+};
+
+/* pac 7311 */
+static const __u8 init_7311[] = {
+	0x78, 0x40,	/* Bit_0=start stream, Bit_6=LED */
+	0x78, 0x40,	/* Bit_0=start stream, Bit_6=LED */
+	0x78, 0x44,	/* Bit_0=start stream, Bit_6=LED */
+	0xff, 0x04,
+	0x27, 0x80,
+	0x28, 0xca,
+	0x29, 0x53,
+	0x2a, 0x0e,
+	0xff, 0x01,
+	0x3e, 0x20,
+};
+
+static const __u8 start_7311[] = {
+/*	index, len, [value]* */
+	0xff, 1,	0x01,		/* page 1 */
+	0x02, 43,	0x48, 0x0a, 0x40, 0x08, 0x00, 0x00, 0x08, 0x00,
+			0x06, 0xff, 0x11, 0xff, 0x5a, 0x30, 0x90, 0x4c,
+			0x00, 0x07, 0x00, 0x0a, 0x10, 0x00, 0xa0, 0x10,
+			0x02, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x01, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00,
+	0x3e, 42,	0x00, 0x00, 0x78, 0x52, 0x4a, 0x52, 0x78, 0x6e,
+			0x48, 0x46, 0x48, 0x6e, 0x5f, 0x49, 0x42, 0x49,
+			0x5f, 0x5f, 0x49, 0x42, 0x49, 0x5f, 0x6e, 0x48,
+			0x46, 0x48, 0x6e, 0x78, 0x52, 0x4a, 0x52, 0x78,
+			0x00, 0x00, 0x09, 0x1b, 0x34, 0x49, 0x5c, 0x9b,
+			0xd0, 0xff,
+	0x78, 6,	0x44, 0x00, 0xf2, 0x01, 0x01, 0x80,
+	0x7f, 18,	0x2a, 0x1c, 0x00, 0xc8, 0x02, 0x58, 0x03, 0x84,
+			0x12, 0x00, 0x1a, 0x04, 0x08, 0x0c, 0x10, 0x14,
+			0x18, 0x20,
+	0x96, 3,	0x01, 0x08, 0x04,
+	0xa0, 4,	0x44, 0x44, 0x44, 0x04,
+	0xf0, 13,	0x01, 0x00, 0x00, 0x00, 0x22, 0x00, 0x20, 0x00,
+			0x3f, 0x00, 0x0a, 0x01, 0x00,
+	0xff, 1,	0x04,		/* page 4 */
+	0x00, 254,			/* load the page 4 */
+	0x11, 1,	0x01,
+	0, 0				/* end of sequence */
+};
+
+/* page 4 - the value 0xaa says skip the index - see reg_w_page() */
+static const __u8 page4_7311[] = {
+	0xaa, 0xaa, 0x04, 0x54, 0x07, 0x2b, 0x09, 0x0f,
+	0x09, 0x00, 0xaa, 0xaa, 0x07, 0x00, 0x00, 0x62,
+	0x08, 0xaa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, 0xaa,
+	0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x68,
+	0xca, 0x10, 0x06, 0x78, 0x00, 0x00, 0x00, 0x00,
+	0x23, 0x28, 0x04, 0x11, 0x00, 0x00
 };
 
 static void reg_w_buf(struct gspca_dev *gspca_dev,
-		  __u16 index,
-		  const char *buffer, __u16 len)
+		  __u8 index,
+		  const char *buffer, int len)
 {
 	memcpy(gspca_dev->usb_buf, buffer, len);
 	usb_control_msg(gspca_dev->dev,
@@ -217,21 +408,9 @@ static void reg_w_buf(struct gspca_dev *gspca_dev,
 			500);
 }
 
-static __u8 reg_r(struct gspca_dev *gspca_dev,
-			     __u16 index)
-{
-	usb_control_msg(gspca_dev->dev,
-			usb_rcvctrlpipe(gspca_dev->dev, 0),
-			0,			/* request */
-			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			0,			/* value */
-			index, gspca_dev->usb_buf, 1,
-			500);
-	return gspca_dev->usb_buf[0];
-}
 
 static void reg_w(struct gspca_dev *gspca_dev,
-		  __u16 index,
+		  __u8 index,
 		  __u8 value)
 {
 	gspca_dev->usb_buf[0] = value;
@@ -239,10 +418,78 @@ static void reg_w(struct gspca_dev *gspca_dev,
 			usb_sndctrlpipe(gspca_dev->dev, 0),
 			0,			/* request */
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value, index, gspca_dev->usb_buf, 1,
+			0, index, gspca_dev->usb_buf, 1,
 			500);
 }
 
+static void reg_w_seq(struct gspca_dev *gspca_dev,
+		const __u8 *seq, int len)
+{
+	while (--len >= 0) {
+		reg_w(gspca_dev, seq[0], seq[1]);
+		seq += 2;
+	}
+}
+
+/* load the beginning of a page */
+static void reg_w_page(struct gspca_dev *gspca_dev,
+			const __u8 *page, int len)
+{
+	int index;
+
+	for (index = 0; index < len; index++) {
+		if (page[index] == 0xaa)		/* skip this index */
+			continue;
+		gspca_dev->usb_buf[0] = page[index];
+		usb_control_msg(gspca_dev->dev,
+				usb_sndctrlpipe(gspca_dev->dev, 0),
+				0,			/* request */
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				0, index, gspca_dev->usb_buf, 1,
+				500);
+	}
+}
+
+/* output a variable sequence */
+static void reg_w_var(struct gspca_dev *gspca_dev,
+			const __u8 *seq)
+{
+	int index, len;
+
+	for (;;) {
+		index = *seq++;
+		len = *seq++;
+		switch (len) {
+		case 0:
+			return;
+		case 254:
+			reg_w_page(gspca_dev, page4_7311, sizeof page4_7311);
+			break;
+		case 255:
+			reg_w_page(gspca_dev, page3_7302, sizeof page3_7302);
+			break;
+		default:
+			if (len > 64) {
+				PDEBUG(D_ERR|D_STREAM,
+					"Incorrect variable sequence");
+				return;
+			}
+			while (len > 0) {
+				if (len < 8) {
+					reg_w_buf(gspca_dev, index, seq, len);
+					seq += len;
+					break;
+				}
+				reg_w_buf(gspca_dev, index, seq, 8);
+				seq += 8;
+				index += 8;
+				len -= 8;
+			}
+		}
+	}
+	/* not reached */
+}
+
 /* this function is called at probe time */
 static int sd_config(struct gspca_dev *gspca_dev,
 			const struct usb_device_id *id)
@@ -250,71 +497,181 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 
-	PDEBUG(D_CONF, "Find Sensor PAC7311");
-	reg_w(gspca_dev, 0x78, 0x40); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x40); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0xff, 0x04);
-	reg_w(gspca_dev, 0x27, 0x80);
-	reg_w(gspca_dev, 0x28, 0xca);
-	reg_w(gspca_dev, 0x29, 0x53);
-	reg_w(gspca_dev, 0x2a, 0x0e);
-	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x3e, 0x20);
-
 	cam = &gspca_dev->cam;
 	cam->epaddr = 0x05;
-	cam->cam_mode = vga_mode;
-	cam->nmodes = ARRAY_SIZE(vga_mode);
+
+	sd->sensor = id->driver_info;
+	if (sd->sensor == SENSOR_PAC7302) {
+		PDEBUG(D_CONF, "Find Sensor PAC7302");
+		cam->cam_mode = &vga_mode[2];	/* only 640x480 */
+		cam->nmodes = 1;
+	} else {
+		PDEBUG(D_CONF, "Find Sensor PAC7311");
+		cam->cam_mode = vga_mode;
+		cam->nmodes = ARRAY_SIZE(vga_mode);
+		gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX)
+				| (1 << SATURATION_IDX);
+	}
 
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
 	sd->colors = COLOR_DEF;
+	sd->gain = GAIN_DEF;
+	sd->exposure = EXPOSURE_DEF;
 	sd->autogain = AUTOGAIN_DEF;
+	sd->hflip = HFLIP_DEF;
+	sd->vflip = VFLIP_DEF;
 	return 0;
 }
 
-static void setbrightness(struct gspca_dev *gspca_dev)
+/* This function is used by pac7302 only */
+static void setbrightcont(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i, v;
+	static const __u8 max[10] =
+		{0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb,
+		 0xd4, 0xec};
+	static const __u8 delta[10] =
+		{0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17,
+		 0x11, 0x0b};
+
+	reg_w(gspca_dev, 0xff, 0x00);	/* page 0 */
+	for (i = 0; i < 10; i++) {
+		v = max[i];
+		v += (sd->brightness - BRIGHTNESS_MAX)
+			* 150 / BRIGHTNESS_MAX;		/* 200 ? */
+		v -= delta[i] * sd->contrast / CONTRAST_MAX;
+		if (v < 0)
+			v = 0;
+		else if (v > 0xff)
+			v = 0xff;
+		reg_w(gspca_dev, 0xa2 + i, v);
+	}
+	reg_w(gspca_dev, 0xdc, 0x01);
+}
+
+/* This function is used by pac7311 only */
+static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int brightness;
 
-/*jfm: inverted?*/
-	brightness = BRIGHTNESS_MAX - sd->brightness;
 	reg_w(gspca_dev, 0xff, 0x04);
-/*	reg_w(gspca_dev, 0x0e, 0x00); */
-	reg_w(gspca_dev, 0x0f, brightness);
+	reg_w(gspca_dev, 0x10, sd->contrast >> 4);
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
-	PDEBUG(D_CONF|D_STREAM, "brightness: %i", brightness);
 }
 
-static void setcontrast(struct gspca_dev *gspca_dev)
+/* This function is used by pac7302 only */
+static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	int i, v;
+	static const int a[9] =
+		{217, -212, 0, -101, 170, -67, -38, -315, 355};
+	static const int b[9] =
+		{19, 106, 0, 19, 106, 1, 19, 106, 1};
 
-	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x80, sd->contrast);
+	reg_w(gspca_dev, 0xff, 0x03);	/* page 3 */
+	reg_w(gspca_dev, 0x11, 0x01);
+	reg_w(gspca_dev, 0xff, 0x00);	/* page 0 */
+	reg_w(gspca_dev, 0xff, 0x00);	/* page 0 */
+	for (i = 0; i < 9; i++) {
+		v = a[i] * sd->colors / COLOR_MAX + b[i];
+		reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07);
+		reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
+	}
+	reg_w(gspca_dev, 0xdc, 0x01);
+	PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
+}
+
+static void setgain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->sensor == SENSOR_PAC7302) {
+		reg_w(gspca_dev, 0xff, 0x03);		/* page 3 */
+		reg_w(gspca_dev, 0x10, sd->gain >> 3);
+	} else {
+		int gain = GAIN_MAX - sd->gain;
+		if (gain < 1)
+			gain = 1;
+		else if (gain > 245)
+			gain = 245;
+		reg_w(gspca_dev, 0xff, 0x04);		/* page 4 */
+		reg_w(gspca_dev, 0x0e, 0x00);
+		reg_w(gspca_dev, 0x0f, gain);
+	}
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
-	PDEBUG(D_CONF|D_STREAM, "contrast: %i", sd->contrast);
 }
 
-static void setcolors(struct gspca_dev *gspca_dev)
+static void setexposure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	__u8 reg;
+
+	/* register 2 of frame 3/4 contains the clock divider configuring the
+	   no fps according to the formula: 60 / reg. sd->exposure is the
+	   desired exposure time in ms. */
+	reg = 120 * sd->exposure / 1000;
+	if (reg < 2)
+		reg = 2;
+	else if (reg > 63)
+		reg = 63;
+
+	if (sd->sensor == SENSOR_PAC7302) {
+		/* On the pac7302 reg2 MUST be a multiple of 3, so round it to
+		   the nearest multiple of 3, except when between 6 and 12? */
+		if (reg < 6 || reg > 12)
+			reg = ((reg + 1) / 3) * 3;
+		reg_w(gspca_dev, 0xff, 0x03);		/* page 3 */
+		reg_w(gspca_dev, 0x02, reg);
+	} else {
+		reg_w(gspca_dev, 0xff, 0x04);		/* page 4 */
+		reg_w(gspca_dev, 0x02, reg);
+		/* Page 1 register 8 must always be 0x08 except when not in
+		   640x480 mode and Page3/4 reg 2 <= 3 then it must be 9 */
+		reg_w(gspca_dev, 0xff, 0x01);
+		if (gspca_dev->cam.cam_mode[(int)gspca_dev->curr_mode].priv &&
+				reg <= 3)
+			reg_w(gspca_dev, 0x08, 0x09);
+		else
+			reg_w(gspca_dev, 0x08, 0x08);
+	}
+	/* load registers to sensor (Bit 0, auto clear) */
+	reg_w(gspca_dev, 0x11, 0x01);
+}
 
-	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x10, sd->colors);
+static void sethvflip(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	__u8 data;
+
+	if (sd->sensor == SENSOR_PAC7302) {
+		reg_w(gspca_dev, 0xff, 0x03);		/* page 3 */
+		data = (sd->hflip ? 0x08 : 0x00)
+			| (sd->vflip ? 0x04 : 0x00);
+	} else {
+		reg_w(gspca_dev, 0xff, 0x04);		/* page 4 */
+		data = (sd->hflip ? 0x04 : 0x00)
+			| (sd->vflip ? 0x08 : 0x00);
+	}
+	reg_w(gspca_dev, 0x21, data);
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
-	PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
-	reg_w(gspca_dev, 0x78, 0x00);	/* Turn on LED */
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->sensor == SENSOR_PAC7302)
+		reg_w_seq(gspca_dev, init_7302, sizeof init_7302);
+	else
+		reg_w_seq(gspca_dev, init_7311, sizeof init_7311);
+
 	return 0;
 }
 
@@ -322,126 +679,63 @@ static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w_buf(gspca_dev, 0x0002, "\x48\x0a\x40\x08\x00\x00\x08\x00", 8);
-	reg_w_buf(gspca_dev, 0x000a, "\x06\xff\x11\xff\x5a\x30\x90\x4c", 8);
-	reg_w_buf(gspca_dev, 0x0012, "\x00\x07\x00\x0a\x10\x00\xa0\x10", 8);
-	reg_w_buf(gspca_dev, 0x001a, "\x02\x00\x00\x00\x00\x0b\x01\x00", 8);
-	reg_w_buf(gspca_dev, 0x0022, "\x00\x00\x00\x00\x00\x00\x00\x00", 8);
-	reg_w_buf(gspca_dev, 0x002a, "\x00\x00\x00", 3);
-	reg_w_buf(gspca_dev, 0x003e, "\x00\x00\x78\x52\x4a\x52\x78\x6e", 8);
-	reg_w_buf(gspca_dev, 0x0046, "\x48\x46\x48\x6e\x5f\x49\x42\x49", 8);
-	reg_w_buf(gspca_dev, 0x004e, "\x5f\x5f\x49\x42\x49\x5f\x6e\x48", 8);
-	reg_w_buf(gspca_dev, 0x0056, "\x46\x48\x6e\x78\x52\x4a\x52\x78", 8);
-	reg_w_buf(gspca_dev, 0x005e, "\x00\x00\x09\x1b\x34\x49\x5c\x9b", 8);
-	reg_w_buf(gspca_dev, 0x0066, "\xd0\xff", 2);
-	reg_w_buf(gspca_dev, 0x0078, "\x44\x00\xf2\x01\x01\x80", 6);
-	reg_w_buf(gspca_dev, 0x007f, "\x2a\x1c\x00\xc8\x02\x58\x03\x84", 8);
-	reg_w_buf(gspca_dev, 0x0087, "\x12\x00\x1a\x04\x08\x0c\x10\x14", 8);
-	reg_w_buf(gspca_dev, 0x008f, "\x18\x20", 2);
-	reg_w_buf(gspca_dev, 0x0096, "\x01\x08\x04", 3);
-	reg_w_buf(gspca_dev, 0x00a0, "\x44\x44\x44\x04", 4);
-	reg_w_buf(gspca_dev, 0x00f0, "\x01\x00\x00\x00\x22\x00\x20\x00", 8);
-	reg_w_buf(gspca_dev, 0x00f8, "\x3f\x00\x0a\x01\x00", 5);
+	sd->sof_read = 0;
 
-	reg_w(gspca_dev, 0xff, 0x04);
-	reg_w(gspca_dev, 0x02, 0x04);
-	reg_w(gspca_dev, 0x03, 0x54);
-	reg_w(gspca_dev, 0x04, 0x07);
-	reg_w(gspca_dev, 0x05, 0x2b);
-	reg_w(gspca_dev, 0x06, 0x09);
-	reg_w(gspca_dev, 0x07, 0x0f);
-	reg_w(gspca_dev, 0x08, 0x09);
-	reg_w(gspca_dev, 0x09, 0x00);
-	reg_w(gspca_dev, 0x0c, 0x07);
-	reg_w(gspca_dev, 0x0d, 0x00);
-	reg_w(gspca_dev, 0x0e, 0x00);
-	reg_w(gspca_dev, 0x0f, 0x62);
-	reg_w(gspca_dev, 0x10, 0x08);
-	reg_w(gspca_dev, 0x12, 0x07);
-	reg_w(gspca_dev, 0x13, 0x00);
-	reg_w(gspca_dev, 0x14, 0x00);
-	reg_w(gspca_dev, 0x15, 0x00);
-	reg_w(gspca_dev, 0x16, 0x00);
-	reg_w(gspca_dev, 0x17, 0x00);
-	reg_w(gspca_dev, 0x18, 0x00);
-	reg_w(gspca_dev, 0x19, 0x00);
-	reg_w(gspca_dev, 0x1a, 0x00);
-	reg_w(gspca_dev, 0x1b, 0x03);
-	reg_w(gspca_dev, 0x1c, 0xa0);
-	reg_w(gspca_dev, 0x1d, 0x01);
-	reg_w(gspca_dev, 0x1e, 0xf4);
-	reg_w(gspca_dev, 0x21, 0x00);
-	reg_w(gspca_dev, 0x22, 0x08);
-	reg_w(gspca_dev, 0x24, 0x03);
-	reg_w(gspca_dev, 0x26, 0x00);
-	reg_w(gspca_dev, 0x27, 0x01);
-	reg_w(gspca_dev, 0x28, 0xca);
-	reg_w(gspca_dev, 0x29, 0x10);
-	reg_w(gspca_dev, 0x2a, 0x06);
-	reg_w(gspca_dev, 0x2b, 0x78);
-	reg_w(gspca_dev, 0x2c, 0x00);
-	reg_w(gspca_dev, 0x2d, 0x00);
-	reg_w(gspca_dev, 0x2e, 0x00);
-	reg_w(gspca_dev, 0x2f, 0x00);
-	reg_w(gspca_dev, 0x30, 0x23);
-	reg_w(gspca_dev, 0x31, 0x28);
-	reg_w(gspca_dev, 0x32, 0x04);
-	reg_w(gspca_dev, 0x33, 0x11);
-	reg_w(gspca_dev, 0x34, 0x00);
-	reg_w(gspca_dev, 0x35, 0x00);
-	reg_w(gspca_dev, 0x11, 0x01);
-	setcontrast(gspca_dev);
-	setbrightness(gspca_dev);
-	setcolors(gspca_dev);
+	if (sd->sensor == SENSOR_PAC7302) {
+		reg_w_var(gspca_dev, start_7302);
+		setbrightcont(gspca_dev);
+		setcolors(gspca_dev);
+	} else {
+		reg_w_var(gspca_dev, start_7311);
+		setcontrast(gspca_dev);
+	}
+	setgain(gspca_dev);
+	setexposure(gspca_dev);
+	sethvflip(gspca_dev);
 
 	/* set correct resolution */
 	switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) {
-	case 2:					/* 160x120 */
-		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x02, 0x03);
+	case 2:					/* 160x120 pac7311 */
 		reg_w(gspca_dev, 0xff, 0x01);
-		reg_w(gspca_dev, 0x08, 0x09);
 		reg_w(gspca_dev, 0x17, 0x20);
-		reg_w(gspca_dev, 0x1b, 0x00);
-/*		reg_w(gspca_dev, 0x80, 0x69); */
 		reg_w(gspca_dev, 0x87, 0x10);
 		break;
-	case 1:					/* 320x240 */
-		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x02, 0x03);
+	case 1:					/* 320x240 pac7311 */
 		reg_w(gspca_dev, 0xff, 0x01);
-		reg_w(gspca_dev, 0x08, 0x09);
 		reg_w(gspca_dev, 0x17, 0x30);
-/*		reg_w(gspca_dev, 0x80, 0x3f); */
 		reg_w(gspca_dev, 0x87, 0x11);
 		break;
 	case 0:					/* 640x480 */
-		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x02, 0x03);
+		if (sd->sensor == SENSOR_PAC7302)
+			break;
 		reg_w(gspca_dev, 0xff, 0x01);
-		reg_w(gspca_dev, 0x08, 0x08);
 		reg_w(gspca_dev, 0x17, 0x00);
-/*		reg_w(gspca_dev, 0x80, 0x1c); */
 		reg_w(gspca_dev, 0x87, 0x12);
 		break;
 	}
 
+	sd->sof_read = 0;
+	sd->autogain_ignore_frames = 0;
+	atomic_set(&sd->avg_lum, -1);
+
 	/* start stream */
 	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x78, 0x04);
-	reg_w(gspca_dev, 0x78, 0x05);
-
-	if (sd->autogain) {
-		sd->ag_cnt = AG_CNT_START;
-		sd->avg_lum = 0;
-	} else {
-		sd->ag_cnt = -1;
-	}
+	if (sd->sensor == SENSOR_PAC7302)
+		reg_w(gspca_dev, 0x78, 0x01);
+	else
+		reg_w(gspca_dev, 0x78, 0x05);
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->sensor == SENSOR_PAC7302) {
+		reg_w(gspca_dev, 0xff, 0x01);
+		reg_w(gspca_dev, 0x78, 0x00);
+		reg_w(gspca_dev, 0x78, 0x00);
+		return;
+	}
 	reg_w(gspca_dev, 0xff, 0x04);
 	reg_w(gspca_dev, 0x27, 0x80);
 	reg_w(gspca_dev, 0x28, 0xca);
@@ -449,179 +743,147 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x2a, 0x0e);
 	reg_w(gspca_dev, 0xff, 0x01);
 	reg_w(gspca_dev, 0x3e, 0x20);
-	reg_w(gspca_dev, 0x78, 0x04); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
+	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->sensor == SENSOR_PAC7302) {
+		reg_w(gspca_dev, 0xff, 0x01);
+		reg_w(gspca_dev, 0x78, 0x40);
+	}
 }
 
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
+/* Include pac common sof detection functions */
+#include "pac_common.h"
+
+static void do_autogain(struct gspca_dev *gspca_dev)
 {
-	reg_w(gspca_dev, 0xff, 0x04);
-	reg_w(gspca_dev, 0x27, 0x80);
-	reg_w(gspca_dev, 0x28, 0xca);
-	reg_w(gspca_dev, 0x29, 0x53);
-	reg_w(gspca_dev, 0x2a, 0x0e);
-	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x3e, 0x20);
-	reg_w(gspca_dev, 0x78, 0x04); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
-}
-
-static void setautogain(struct gspca_dev *gspca_dev, int luma)
-{
-	int luma_mean = 128;
-	int luma_delta = 20;
-	__u8 spring = 5;
-	int Gbright;
-
-	Gbright = reg_r(gspca_dev, 0x02);
-	PDEBUG(D_FRAM, "luma mean %d", luma);
-	if (luma < luma_mean - luma_delta ||
-	    luma > luma_mean + luma_delta) {
-		Gbright += (luma_mean - luma) >> spring;
-		if (Gbright > 0x1a)
-			Gbright = 0x1a;
-		else if (Gbright < 4)
-			Gbright = 4;
-		PDEBUG(D_FRAM, "gbright %d", Gbright);
-		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x0f, Gbright);
-		/* load registers to sensor (Bit 0, auto clear) */
-		reg_w(gspca_dev, 0x11, 0x01);
+	struct sd *sd = (struct sd *) gspca_dev;
+	int avg_lum = atomic_read(&sd->avg_lum);
+	int desired_lum, deadzone;
+
+	if (avg_lum == -1)
+		return;
+
+	if (sd->sensor == SENSOR_PAC7302) {
+		desired_lum = 270 + sd->brightness * 4;
+		/* Hack hack, with the 7202 the first exposure step is
+		   pretty large, so if we're about to make the first
+		   exposure increase make the deadzone large to avoid
+		   oscilating */
+		if (desired_lum > avg_lum && sd->gain == GAIN_DEF &&
+				sd->exposure > EXPOSURE_DEF &&
+				sd->exposure < 42)
+			deadzone = 90;
+		else
+			deadzone = 30;
+	} else {
+		desired_lum = 200;
+		deadzone = 20;
 	}
+
+	if (sd->autogain_ignore_frames > 0)
+		sd->autogain_ignore_frames--;
+	else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum,
+			deadzone, GAIN_KNEE, EXPOSURE_KNEE))
+		sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
 }
 
+static const unsigned char pac7311_jpeg_header1[] = {
+  0xff, 0xd8, 0xff, 0xc0, 0x00, 0x11, 0x08
+};
+
+static const unsigned char pac7311_jpeg_header2[] = {
+  0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, 0xda,
+  0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00
+};
+
+/* this function is run at interrupt level */
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	unsigned char tmpbuf[4];
-	int i, p, ffseq;
-
-/*	if (len < 5) { */
-	if (len < 6) {
-/*		gspca_dev->last_packet_type = DISCARD_PACKET; */
-		return;
-	}
-
-	ffseq = sd->ffseq;
-
-	for (p = 0; p < len - 6; p++) {
-		if ((data[0 + p] == 0xff)
-		    && (data[1 + p] == 0xff)
-		    && (data[2 + p] == 0x00)
-		    && (data[3 + p] == 0xff)
-		    && (data[4 + p] == 0x96)) {
-
-			/* start of frame */
-			if (sd->ag_cnt >= 0 && p > 28) {
-				sd->avg_lum += data[p - 23];
-				if (--sd->ag_cnt < 0) {
-					sd->ag_cnt = AG_CNT_START;
-					setautogain(gspca_dev,
-						sd->avg_lum / AG_CNT_START);
-					sd->avg_lum = 0;
-				}
-			}
+	unsigned char *sof;
+
+	sof = pac_find_sof(gspca_dev, data, len);
+	if (sof) {
+		unsigned char tmpbuf[4];
+		int n, lum_offset, footer_length;
+
+		if (sd->sensor == SENSOR_PAC7302) {
+		  /* 6 bytes after the FF D9 EOF marker a number of lumination
+		     bytes are send corresponding to different parts of the
+		     image, the 14th and 15th byte after the EOF seem to
+		     correspond to the center of the image */
+		  lum_offset = 61 + sizeof pac_sof_marker;
+		  footer_length = 74;
+		} else {
+		  lum_offset = 24 + sizeof pac_sof_marker;
+		  footer_length = 26;
+		}
 
-			/* copy the end of data to the current frame */
+		/* Finish decoding current frame */
+		n = (sof - data) - (footer_length + sizeof pac_sof_marker);
+		if (n < 0) {
+			frame->data_end += n;
+			n = 0;
+		}
+		frame = gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+					data, n);
+		if (gspca_dev->last_packet_type != DISCARD_PACKET &&
+				frame->data_end[-2] == 0xff &&
+				frame->data_end[-1] == 0xd9)
 			frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
-						data, p);
-
-			/* put the JPEG header in the new frame */
-			gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-					(unsigned char *) pac7311_jpeg_header,
-					12);
+						NULL, 0);
+
+		n = sof - data;
+		len -= n;
+		data = sof;
+
+		/* Get average lumination */
+		if (gspca_dev->last_packet_type == LAST_PACKET &&
+				n >= lum_offset)
+			atomic_set(&sd->avg_lum, data[-lum_offset] +
+						data[-lum_offset + 1]);
+		else
+			atomic_set(&sd->avg_lum, -1);
+
+		/* Start the new frame with the jpeg header */
+		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+			pac7311_jpeg_header1, sizeof(pac7311_jpeg_header1));
+		if (sd->sensor == SENSOR_PAC7302) {
+			/* The PAC7302 has the image rotated 90 degrees */
+			tmpbuf[0] = gspca_dev->width >> 8;
+			tmpbuf[1] = gspca_dev->width & 0xff;
+			tmpbuf[2] = gspca_dev->height >> 8;
+			tmpbuf[3] = gspca_dev->height & 0xff;
+		} else {
 			tmpbuf[0] = gspca_dev->height >> 8;
 			tmpbuf[1] = gspca_dev->height & 0xff;
 			tmpbuf[2] = gspca_dev->width >> 8;
 			tmpbuf[3] = gspca_dev->width & 0xff;
-			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
-					tmpbuf, 4);
-			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
-				(unsigned char *) &pac7311_jpeg_header[16],
-				PAC7311_JPEG_HEADER_SIZE - 16);
-
-			data += p + 7;
-			len -= p + 7;
-			ffseq = 0;
-			break;
 		}
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame, tmpbuf, 4);
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+			pac7311_jpeg_header2, sizeof(pac7311_jpeg_header2));
 	}
-
-	/* remove the 'ff ff ff xx' sequences */
-	switch (ffseq) {
-	case 3:
-		data += 1;
-		len -= 1;
-		break;
-	case 2:
-		if (data[0] == 0xff) {
-			data += 2;
-			len -= 2;
-			frame->data_end -= 2;
-		}
-		break;
-	case 1:
-		if (data[0] == 0xff
-		    && data[1] == 0xff) {
-			data += 3;
-			len -= 3;
-			frame->data_end -= 1;
-		}
-		break;
-	}
-	for (i = 0; i < len - 4; i++) {
-		if (data[i] == 0xff
-		    && data[i + 1] == 0xff
-		    && data[i + 2] == 0xff) {
-			memmove(&data[i], &data[i + 4], len - i - 4);
-			len -= 4;
-		}
-	}
-	ffseq = 0;
-	if (data[len - 4] == 0xff) {
-		if (data[len - 3] == 0xff
-		    && data[len - 2] == 0xff) {
-			len -= 4;
-		}
-	} else if (data[len - 3] == 0xff) {
-		if (data[len - 2] == 0xff
-		    && data[len - 1] == 0xff)
-			ffseq = 3;
-	} else if (data[len - 2] == 0xff) {
-		if (data[len - 1] == 0xff)
-			ffseq = 2;
-	} else if (data[len - 1] == 0xff)
-		ffseq = 1;
-	sd->ffseq = ffseq;
 	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
 }
 
-static void getbrightness(struct gspca_dev *gspca_dev)
-{
-/*	sd->brightness = reg_r(gspca_dev, 0x08);
-	return sd->brightness;	*/
-/*	PDEBUG(D_CONF, "Called pac7311_getbrightness: Not implemented yet"); */
-}
-
-
-
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->brightness = val;
 	if (gspca_dev->streaming)
-		setbrightness(gspca_dev);
+		setbrightcont(gspca_dev);
 	return 0;
 }
 
@@ -629,7 +891,6 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	getbrightness(gspca_dev);
 	*val = sd->brightness;
 	return 0;
 }
@@ -639,8 +900,12 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->contrast = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
+	if (gspca_dev->streaming) {
+		if (sd->sensor == SENSOR_PAC7302)
+			setbrightcont(gspca_dev);
+		else
+			setcontrast(gspca_dev);
+	}
 	return 0;
 }
 
@@ -648,7 +913,6 @@ static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-/*	getcontrast(gspca_dev); */
 	*val = sd->contrast;
 	return 0;
 }
@@ -667,22 +931,66 @@ static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-/*	getcolors(gspca_dev); */
 	*val = sd->colors;
 	return 0;
 }
 
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gain = val;
+	if (gspca_dev->streaming)
+		setgain(gspca_dev);
+	return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->gain;
+	return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->exposure = val;
+	if (gspca_dev->streaming)
+		setexposure(gspca_dev);
+	return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->exposure;
+	return 0;
+}
+
 static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->autogain = val;
-	if (val) {
-		sd->ag_cnt = AG_CNT_START;
-		sd->avg_lum = 0;
-	} else {
-		sd->ag_cnt = -1;
+	/* when switching to autogain set defaults to make sure
+	   we are on a valid point of the autogain gain /
+	   exposure knee graph, and give this change time to
+	   take effect before doing autogain. */
+	if (sd->autogain) {
+		sd->exposure = EXPOSURE_DEF;
+		sd->gain = GAIN_DEF;
+		if (gspca_dev->streaming) {
+			sd->autogain_ignore_frames =
+				PAC_AUTOGAIN_IGNORE_FRAMES;
+			setexposure(gspca_dev);
+			setgain(gspca_dev);
+		}
 	}
+
 	return 0;
 }
 
@@ -694,29 +1002,67 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->hflip = val;
+	if (gspca_dev->streaming)
+		sethvflip(gspca_dev);
+	return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->hflip;
+	return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vflip = val;
+	if (gspca_dev->streaming)
+		sethvflip(gspca_dev);
+	return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->vflip;
+	return 0;
+}
+
 /* sub-driver description */
 static struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
+	.dq_callback = do_autogain,
 };
 
 /* -- module initialisation -- */
 static __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x093a, 0x2600)},
-	{USB_DEVICE(0x093a, 0x2601)},
-	{USB_DEVICE(0x093a, 0x2603)},
-	{USB_DEVICE(0x093a, 0x2608)},
-	{USB_DEVICE(0x093a, 0x260e)},
-	{USB_DEVICE(0x093a, 0x260f)},
-	{USB_DEVICE(0x093a, 0x2621)},
+	{USB_DEVICE(0x093a, 0x2600), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x2601), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x2603), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x2608), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302},
+	{USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302},
+	{USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -734,6 +1080,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/pac_common.h b/drivers/media/video/gspca/pac_common.h
new file mode 100644
index 00000000000..34d4b1494cd
--- /dev/null
+++ b/drivers/media/video/gspca/pac_common.h
@@ -0,0 +1,60 @@
+/*
+ * Pixart PAC207BCA / PAC73xx common functions
+ *
+ * Copyright (C) 2008 Hans de Goede <j.w.r.degoede@hhs.nl>
+ * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li
+ * Copyleft (C) 2005 Michel Xhaard mxhaard@magic.fr
+ *
+ * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+/* We calculate the autogain at the end of the transfer of a frame, at this
+   moment a frame with the old settings is being transmitted, and a frame is
+   being captured with the old settings. So if we adjust the autogain we must
+   ignore atleast the 2 next frames for the new settings to come into effect
+   before doing any other adjustments */
+#define PAC_AUTOGAIN_IGNORE_FRAMES	3
+
+static const unsigned char pac_sof_marker[5] =
+		{ 0xff, 0xff, 0x00, 0xff, 0x96 };
+
+static unsigned char *pac_find_sof(struct gspca_dev *gspca_dev,
+					unsigned char *m, int len)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+
+	/* Search for the SOF marker (fixed part) in the header */
+	for (i = 0; i < len; i++) {
+		if (m[i] == pac_sof_marker[sd->sof_read]) {
+			sd->sof_read++;
+			if (sd->sof_read == sizeof(pac_sof_marker)) {
+				PDEBUG(D_FRAM,
+					"SOF found, bytes to analyze: %u."
+					" Frame starts at byte #%u",
+					len, i + 1);
+				sd->sof_read = 0;
+				return m + i + 1;
+			}
+		} else {
+			sd->sof_read = 0;
+		}
+	}
+
+	return NULL;
+}
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index e18748c5a14..5dd78c6766e 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -20,6 +20,26 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
+/* Some documentation on known sonixb registers:
+
+Reg	Use
+0x10	high nibble red gain low nibble blue gain
+0x11	low nibble green gain
+0x12	hstart
+0x13	vstart
+0x15	hsize (hsize = register-value * 16)
+0x16	vsize (vsize = register-value * 16)
+0x17	bit 0 toggle compression quality (according to sn9c102 driver)
+0x18	bit 7 enables compression, bit 4-5 set image down scaling:
+	00 scale 1, 01 scale 1/2, 10, scale 1/4
+0x19	high-nibble is sensor clock divider, changes exposure on sensors which
+	use a clock generated by the bridge. Some sensors have their own clock.
+0x1c	auto_exposure area (for avg_lum) startx (startx = register-value * 32)
+0x1d	auto_exposure area (for avg_lum) starty (starty = register-value * 32)
+0x1e	auto_exposure area (for avg_lum) stopx (hsize = (0x1e - 0x1c) * 32)
+0x1f	auto_exposure area (for avg_lum) stopy (vsize = (0x1f - 0x1d) * 32)
+*/
+
 #define MODULE_NAME "sonixb"
 
 #include "gspca.h"
@@ -31,10 +51,8 @@ MODULE_LICENSE("GPL");
 /* specific webcam descriptor */
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
-
-	struct sd_desc sd_desc;		/* our nctrls differ dependend upon the
-					   sensor, so we use a per cam copy */
 	atomic_t avg_lum;
+	int prev_avg_lum;
 
 	unsigned char gain;
 	unsigned char exposure;
@@ -44,8 +62,12 @@ struct sd {
 	unsigned char frames_to_drop;
 	unsigned char freq;		/* light freq filter setting */
 
-	unsigned char fr_h_sz;		/* size of frame header */
-	char sensor;			/* Type of image sensor chip */
+	__u8 bridge;			/* Type of bridge */
+#define BRIDGE_101 0
+#define BRIDGE_102 0 /* We make no difference between 101 and 102 */
+#define BRIDGE_103 1
+
+	__u8 sensor;			/* Type of image sensor chip */
 #define SENSOR_HV7131R 0
 #define SENSOR_OV6650 1
 #define SENSOR_OV7630 2
@@ -53,16 +75,35 @@ struct sd {
 #define SENSOR_PAS202 4
 #define SENSOR_TAS5110 5
 #define SENSOR_TAS5130CXX 6
-	char sensor_has_gain;
-	__u8 sensor_addr;
 	__u8 reg11;
 };
 
-/* flags used in the device id table */
+typedef const __u8 sensor_init_t[8];
+
+struct sensor_data {
+	const __u8 *bridge_init[2];
+	int bridge_init_size[2];
+	sensor_init_t *sensor_init;
+	int sensor_init_size;
+	sensor_init_t *sensor_bridge_init[2];
+	int sensor_bridge_init_size[2];
+	int flags;
+	unsigned ctrl_dis;
+	__u8 sensor_addr;
+};
+
+/* sensor_data flags */
 #define F_GAIN 0x01		/* has gain */
-#define F_AUTO 0x02		/* has autogain */
-#define F_SIF  0x04		/* sif or vga */
-#define F_H18  0x08		/* long (18 b) or short (12 b) frame header */
+#define F_SIF  0x02		/* sif or vga */
+
+/* priv field of struct v4l2_pix_format flags (do not use low nibble!) */
+#define MODE_RAW 0x10		/* raw bayer mode */
+#define MODE_REDUCED_SIF 0x20	/* vga mode (320x240 / 160x120) on sif cam */
+
+/* ctrl_dis helper macros */
+#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
+#define NO_FREQ (1 << FREQ_IDX)
+#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
 
 #define COMP2 0x8f
 #define COMP 0xc7		/* 0x87 //0x07 */
@@ -73,6 +114,18 @@ struct sd {
 
 #define SYS_CLK 0x04
 
+#define SENS(bridge_1, bridge_3, sensor, sensor_1, \
+	sensor_3, _flags, _ctrl_dis, _sensor_addr) \
+{ \
+	.bridge_init = { bridge_1, bridge_3 }, \
+	.bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \
+	.sensor_init = sensor, \
+	.sensor_init_size = sizeof(sensor), \
+	.sensor_bridge_init = { sensor_1, sensor_3,}, \
+	.sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \
+	.flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \
+}
+
 /* We calculate the autogain at the end of the transfer of a frame, at this
    moment a frame with the old settings is being transmitted, and a frame is
    being captured with the old settings. So if we adjust the autogain we must
@@ -95,6 +148,7 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
 	{
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
@@ -109,6 +163,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setbrightness,
 	    .get = sd_getbrightness,
 	},
+#define GAIN_IDX 1
 	{
 	    {
 		.id      = V4L2_CID_GAIN,
@@ -124,6 +179,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setgain,
 	    .get = sd_getgain,
 	},
+#define EXPOSURE_IDX 2
 	{
 		{
 			.id = V4L2_CID_EXPOSURE,
@@ -140,6 +196,7 @@ static struct ctrl sd_ctrls[] = {
 		.set = sd_setexposure,
 		.get = sd_getexposure,
 	},
+#define AUTOGAIN_IDX 3
 	{
 		{
 			.id = V4L2_CID_AUTOGAIN,
@@ -155,6 +212,7 @@ static struct ctrl sd_ctrls[] = {
 		.set = sd_setautogain,
 		.get = sd_getautogain,
 	},
+#define FREQ_IDX 4
 	{
 		{
 			.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
@@ -172,31 +230,56 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format vga_mode[] = {
+	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120 * 5 / 4,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2 | MODE_RAW},
 	{160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120,
+		.sizeimage = 160 * 120 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2},
 	{320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240,
+		.sizeimage = 320 * 240 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 640,
-		.sizeimage = 640 * 480,
+		.sizeimage = 640 * 480 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
 };
 static struct v4l2_pix_format sif_mode[] = {
+	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1 | MODE_RAW | MODE_REDUCED_SIF},
+	{160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120 * 5 / 4,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1 | MODE_REDUCED_SIF},
+	{176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 176 * 144 * 5 / 4,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1 | MODE_RAW},
 	{176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144,
+		.sizeimage = 176 * 144 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
+	{320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 5 / 4,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0 | MODE_REDUCED_SIF},
 	{352, 288, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 352,
-		.sizeimage = 352 * 288,
+		.sizeimage = 352 * 288 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
 };
@@ -204,7 +287,7 @@ static struct v4l2_pix_format sif_mode[] = {
 static const __u8 initHv7131[] = {
 	0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00,
 	0x00, 0x00,
-	0x00, 0x00, 0x00, 0x03, 0x01, 0x00,	/* shift from 0x02 0x01 0x00 */
+	0x00, 0x00, 0x00, 0x02, 0x01, 0x00,
 	0x28, 0x1e, 0x60, 0x8a, 0x20,
 	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c
 };
@@ -218,8 +301,8 @@ static const __u8 hv7131_sensor_init[][8] = {
 static const __u8 initOv6650[] = {
 	0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
 	0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x0b,
-	0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00
+	0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b,
+	0x10, 0x1d, 0x10, 0x02, 0x02, 0x09, 0x07
 };
 static const __u8 ov6650_sensor_init[][8] =
 {
@@ -257,15 +340,15 @@ static const __u8 ov6650_sensor_init[][8] =
 static const __u8 initOv7630[] = {
 	0x04, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,	/* r01 .. r08 */
 	0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,	/* r09 .. r10 */
-	0x00, 0x02, 0x01, 0x0a,				/* r11 .. r14 */
+	0x00, 0x01, 0x01, 0x0a,				/* r11 .. r14 */
 	0x28, 0x1e,			/* H & V sizes     r15 .. r16 */
-	0x68, COMP1, MCK_INIT1,				/* r17 .. r19 */
+	0x68, COMP2, MCK_INIT1,				/* r17 .. r19 */
 	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c		/* r1a .. r1f */
 };
 static const __u8 initOv7630_3[] = {
 	0x44, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0x80,	/* r01 .. r08 */
 	0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04,	/* r09 .. r10 */
-	0x00, 0x01, 0x01, 0x0a,				/* r11 .. r14 */
+	0x00, 0x02, 0x01, 0x0a,				/* r11 .. r14 */
 	0x28, 0x1e,			/* H & V sizes     r15 .. r16 */
 	0x68, 0x8f, MCK_INIT1,				/* r17 .. r19 */
 	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c, 0x00,	/* r1a .. r20 */
@@ -294,47 +377,65 @@ static const __u8 ov7630_sensor_init[][8] = {
 	{0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10},
 };
 
+static const __u8 ov7630_sensor_init_3[][8] = {
+	{0xa0, 0x21, 0x13, 0x80, 0x00,	0x00, 0x00, 0x10},
+};
+
 static const __u8 initPas106[] = {
 	0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
 	0x00, 0x00,
-	0x00, 0x00, 0x00, 0x05, 0x01, 0x00,
-	0x16, 0x12, 0x28, COMP1, MCK_INIT1,
-	0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
+	0x00, 0x00, 0x00, 0x04, 0x01, 0x00,
+	0x16, 0x12, 0x24, COMP1, MCK_INIT1,
+	0x18, 0x10, 0x02, 0x02, 0x09, 0x07
 };
 /* compression 0x86 mckinit1 0x2b */
-static const __u8 pas106_data[][2] = {
-	{0x02, 0x04},		/* Pixel Clock Divider 6 */
-	{0x03, 0x13},		/* Frame Time MSB */
-/*	{0x03, 0x12},		 * Frame Time MSB */
-	{0x04, 0x06},		/* Frame Time LSB */
-/*	{0x04, 0x05},		 * Frame Time LSB */
-	{0x05, 0x65},		/* Shutter Time Line Offset */
-/*	{0x05, 0x6d},		 * Shutter Time Line Offset */
-/*	{0x06, 0xb1},		 * Shutter Time Pixel Offset */
-	{0x06, 0xcd},		/* Shutter Time Pixel Offset */
-	{0x07, 0xc1},		/* Black Level Subtract Sign */
-/*	{0x07, 0x00},		 * Black Level Subtract Sign */
-	{0x08, 0x06},		/* Black Level Subtract Level */
-	{0x08, 0x06},		/* Black Level Subtract Level */
-/*	{0x08, 0x01},		 * Black Level Subtract Level */
-	{0x09, 0x05},		/* Color Gain B Pixel 5 a */
-	{0x0a, 0x04},		/* Color Gain G1 Pixel 1 5 */
-	{0x0b, 0x04},		/* Color Gain G2 Pixel 1 0 5 */
-	{0x0c, 0x05},		/* Color Gain R Pixel 3 1 */
-	{0x0d, 0x00},		/* Color GainH  Pixel */
-	{0x0e, 0x0e},		/* Global Gain */
-	{0x0f, 0x00},		/* Contrast */
-	{0x10, 0x06},		/* H&V synchro polarity */
-	{0x11, 0x06},		/* ?default */
-	{0x12, 0x06},		/* DAC scale */
-	{0x14, 0x02},		/* ?default */
-	{0x13, 0x01},		/* Validate Settings */
+static const __u8 pas106_sensor_init[][8] = {
+	/* Pixel Clock Divider 6 */
+	{ 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 },
+	/* Frame Time MSB (also seen as 0x12) */
+	{ 0xa1, 0x40, 0x03, 0x13, 0x00, 0x00, 0x00, 0x14 },
+	/* Frame Time LSB (also seen as 0x05) */
+	{ 0xa1, 0x40, 0x04, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	/* Shutter Time Line Offset (also seen as 0x6d) */
+	{ 0xa1, 0x40, 0x05, 0x65, 0x00, 0x00, 0x00, 0x14 },
+	/* Shutter Time Pixel Offset (also seen as 0xb1) */
+	{ 0xa1, 0x40, 0x06, 0xcd, 0x00, 0x00, 0x00, 0x14 },
+	/* Black Level Subtract Sign (also seen 0x00) */
+	{ 0xa1, 0x40, 0x07, 0xc1, 0x00, 0x00, 0x00, 0x14 },
+	/* Black Level Subtract Level (also seen 0x01) */
+	{ 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	{ 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	/* Color Gain B Pixel 5 a */
+	{ 0xa1, 0x40, 0x09, 0x05, 0x00, 0x00, 0x00, 0x14 },
+	/* Color Gain G1 Pixel 1 5 */
+	{ 0xa1, 0x40, 0x0a, 0x04, 0x00, 0x00, 0x00, 0x14 },
+	/* Color Gain G2 Pixel 1 0 5 */
+	{ 0xa1, 0x40, 0x0b, 0x04, 0x00, 0x00, 0x00, 0x14 },
+	/* Color Gain R Pixel 3 1 */
+	{ 0xa1, 0x40, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x14 },
+	/* Color GainH  Pixel */
+	{ 0xa1, 0x40, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x14 },
+	/* Global Gain */
+	{ 0xa1, 0x40, 0x0e, 0x0e, 0x00, 0x00, 0x00, 0x14 },
+	/* Contrast */
+	{ 0xa1, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x14 },
+	/* H&V synchro polarity */
+	{ 0xa1, 0x40, 0x10, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	/* ?default */
+	{ 0xa1, 0x40, 0x11, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	/* DAC scale */
+	{ 0xa1, 0x40, 0x12, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	/* ?default */
+	{ 0xa1, 0x40, 0x14, 0x02, 0x00, 0x00, 0x00, 0x14 },
+	/* Validate Settings */
+	{ 0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14 },
 };
+
 static const __u8 initPas202[] = {
 	0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
 	0x00, 0x00,
-	0x00, 0x00, 0x00, 0x07, 0x03, 0x0a,	/* 6 */
-	0x28, 0x1e, 0x28, 0x89, 0x30,
+	0x00, 0x00, 0x00, 0x06, 0x03, 0x0a,
+	0x28, 0x1e, 0x28, 0x89, 0x20,
 	0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
 };
 static const __u8 pas202_sensor_init[][8] = {
@@ -364,7 +465,7 @@ static const __u8 pas202_sensor_init[][8] = {
 static const __u8 initTas5110[] = {
 	0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
 	0x00, 0x00,
-	0x00, 0x01, 0x00, 0x46, 0x09, 0x0a,	/* shift from 0x45 0x09 0x0a */
+	0x00, 0x01, 0x00, 0x45, 0x09, 0x0a,
 	0x16, 0x12, 0x60, 0x86, 0x2b,
 	0x14, 0x0a, 0x02, 0x02, 0x09, 0x07
 };
@@ -377,7 +478,7 @@ static const __u8 tas5110_sensor_init[][8] = {
 static const __u8 initTas5130[] = {
 	0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
 	0x00, 0x00,
-	0x00, 0x01, 0x00, 0x69, 0x0c, 0x0a,
+	0x00, 0x01, 0x00, 0x68, 0x0c, 0x0a,
 	0x28, 0x1e, 0x60, COMP, MCK_INIT,
 	0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
 };
@@ -389,6 +490,21 @@ static const __u8 tas5130_sensor_init[][8] = {
 	{0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10},
 };
 
+struct sensor_data sensor_data[] = {
+SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
+SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
+SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
+	F_GAIN, 0, 0x21),
+SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
+	0),
+SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
+	NO_EXPO|NO_FREQ, 0),
+SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
+	NO_BRIGHTNESS|NO_FREQ, 0),
+SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
+	0),
+};
+
 /* get one byte in gspca_dev->usb_buf */
 static void reg_r(struct gspca_dev *gspca_dev,
 		  __u16 value)
@@ -408,8 +524,8 @@ static void reg_w(struct gspca_dev *gspca_dev,
 		  const __u8 *buffer,
 		  int len)
 {
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	if (len > sizeof gspca_dev->usb_buf) {
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
 		PDEBUG(D_ERR|D_PACK, "reg_w: buffer overflow");
 		return;
 	}
@@ -425,26 +541,6 @@ static void reg_w(struct gspca_dev *gspca_dev,
 			500);
 }
 
-static void reg_w_big(struct gspca_dev *gspca_dev,
-		  __u16 value,
-		  const __u8 *buffer,
-		  int len)
-{
-	__u8 *tmpbuf;
-
-	tmpbuf = kmalloc(len, GFP_KERNEL);
-	memcpy(tmpbuf, buffer, len);
-	usb_control_msg(gspca_dev->dev,
-			usb_sndctrlpipe(gspca_dev->dev, 0),
-			0x08,			/* request */
-			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-			value,
-			0,			/* index */
-			tmpbuf, len,
-			500);
-	kfree(tmpbuf);
-}
-
 static int i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer)
 {
 	int retry = 60;
@@ -487,7 +583,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 			{0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10};
 
 		/* change reg 0x06 */
-		i2cOV[1] = sd->sensor_addr;
+		i2cOV[1] = sensor_data[sd->sensor].sensor_addr;
 		i2cOV[3] = sd->brightness;
 		if (i2c_w(gspca_dev, i2cOV) < 0)
 			goto err;
@@ -545,9 +641,6 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 			goto err;
 		break;
 	    }
-	case SENSOR_TAS5110:
-		/* FIXME figure out howto control brightness on TAS5110 */
-		break;
 	}
 	return;
 err:
@@ -577,7 +670,7 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
 	case SENSOR_OV7630: {
 		__u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10};
 
-		i2c[1] = sd->sensor_addr;
+		i2c[1] = sensor_data[sd->sensor].sensor_addr;
 		i2c[3] = gain >> 2;
 		if (i2c_w(gspca_dev, i2c) < 0)
 			goto err;
@@ -604,7 +697,7 @@ static void setgain(struct gspca_dev *gspca_dev)
 	rgb_value = gain;
 	reg_w(gspca_dev, 0x11, &rgb_value, 1);
 
-	if (sd->sensor_has_gain)
+	if (sensor_data[sd->sensor].flags & F_GAIN)
 		setsensorgain(gspca_dev);
 }
 
@@ -665,6 +758,11 @@ static void setexposure(struct gspca_dev *gspca_dev)
 		else if (reg11 > 16)
 			reg11 = 16;
 
+		/* In 640x480, if the reg11 has less than 3, the image is
+		   unstable (not enough bandwidth). */
+		if (gspca_dev->width == 640 && reg11 < 3)
+			reg11 = 3;
+
 		/* frame exposure time in ms = 1000 * reg11 / 30    ->
 		reg10 = sd->exposure * 2 * reg10_max / (1000 * reg11 / 30) */
 		reg10 = (sd->exposure * 60 * reg10_max) / (1000 * reg11);
@@ -678,13 +776,8 @@ static void setexposure(struct gspca_dev *gspca_dev)
 		else if (reg10 > reg10_max)
 			reg10 = reg10_max;
 
-		/* In 640x480, if the reg11 has less than 3, the image is
-		   unstable (not enough bandwidth). */
-		if (gspca_dev->width == 640 && reg11 < 3)
-			reg11 = 3;
-
 		/* Write reg 10 and reg11 low nibble */
-		i2c[1] = sd->sensor_addr;
+		i2c[1] = sensor_data[sd->sensor].sensor_addr;
 		i2c[3] = reg10;
 		i2c[4] |= reg11 - 1;
 
@@ -724,7 +817,7 @@ static void setfreq(struct gspca_dev *gspca_dev)
 					? 0x4f : 0x8a;
 			break;
 		}
-		i2c[1] = sd->sensor_addr;
+		i2c[1] = sensor_data[sd->sensor].sensor_addr;
 		if (i2c_w(gspca_dev, i2c) < 0)
 			PDEBUG(D_ERR, "i2c error setfreq");
 		break;
@@ -757,30 +850,19 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
-	int sif = 0;
 
-	/* nctrls depends upon the sensor, so we use a per cam copy */
-	memcpy(&sd->sd_desc, gspca_dev->sd_desc, sizeof(struct sd_desc));
-	gspca_dev->sd_desc = &sd->sd_desc;
+	reg_r(gspca_dev, 0x00);
+	if (gspca_dev->usb_buf[0] != 0x10)
+		return -ENODEV;
 
 	/* copy the webcam info from the device id */
-	sd->sensor = (id->driver_info >> 24) & 0xff;
-	if (id->driver_info & (F_GAIN << 16))
-		sd->sensor_has_gain = 1;
-	if (id->driver_info & (F_AUTO << 16))
-		sd->sd_desc.dq_callback = do_autogain;
-	if (id->driver_info & (F_SIF << 16))
-		sif = 1;
-	if (id->driver_info & (F_H18 << 16))
-		sd->fr_h_sz = 18;		/* size of frame header */
-	else
-		sd->fr_h_sz = 12;
-	sd->sd_desc.nctrls = (id->driver_info >> 8) & 0xff;
-	sd->sensor_addr = id->driver_info & 0xff;
+	sd->sensor = id->driver_info >> 8;
+	sd->bridge = id->driver_info & 0xff;
+	gspca_dev->ctrl_dis = sensor_data[sd->sensor].ctrl_dis;
 
 	cam = &gspca_dev->cam;
 	cam->epaddr = 0x01;
-	if (!sif) {
+	if (!(sensor_data[sd->sensor].flags & F_SIF)) {
 		cam->cam_mode = vga_mode;
 		cam->nmodes = ARRAY_SIZE(vga_mode);
 	} else {
@@ -790,157 +872,98 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->gain = GAIN_DEF;
 	sd->exposure = EXPOSURE_DEF;
-	sd->autogain = AUTOGAIN_DEF;
+	if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+		sd->autogain = 0; /* Disable do_autogain callback */
+	else
+		sd->autogain = AUTOGAIN_DEF;
 	sd->freq = FREQ_DEF;
 
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
-	reg_r(gspca_dev, 0x00);
-	if (gspca_dev->usb_buf[0] != 0x10)
-		return -ENODEV;
-	return 0;
-}
+	const __u8 stop = 0x09; /* Disable stream turn of LED */
 
-static void pas106_i2cinit(struct gspca_dev *gspca_dev)
-{
-	int i;
-	const __u8 *data;
-	__u8 i2c1[] = { 0xa1, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14 };
-
-	i = ARRAY_SIZE(pas106_data);
-	data = pas106_data[0];
-	while (--i >= 0) {
-		memcpy(&i2c1[2], data, 2);
-					/* copy 2 bytes from the template */
-		if (i2c_w(gspca_dev, i2c1) < 0)
-			PDEBUG(D_ERR, "i2c error pas106");
-		data += 2;
-	}
+	reg_w(gspca_dev, 0x01, &stop, 1);
+
+	return 0;
 }
 
 /* -- start the camera -- */
 static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int mode, l = 0x1f;
+	struct cam *cam = &gspca_dev->cam;
+	int mode, l;
 	const __u8 *sn9c10x;
-	__u8 reg17_19[3];
-
-	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	__u8 reg12_19[8];
+
+	mode = cam->cam_mode[gspca_dev->curr_mode].priv & 0x07;
+	sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge];
+	l = sensor_data[sd->sensor].bridge_init_size[sd->bridge];
+	memcpy(reg12_19, &sn9c10x[0x12 - 1], 8);
+	reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4);
+	/* Special cases where reg 17 and or 19 value depends on mode */
 	switch (sd->sensor) {
-	case SENSOR_HV7131R:
-		sn9c10x = initHv7131;
-		reg17_19[0] = 0x60;
-		reg17_19[1] = (mode << 4) | 0x8a;
-		reg17_19[2] = 0x20;
-		break;
-	case SENSOR_OV6650:
-		sn9c10x = initOv6650;
-		reg17_19[0] = 0x68;
-		reg17_19[1] = (mode << 4) | 0x8b;
-		reg17_19[2] = 0x20;
-		break;
-	case SENSOR_OV7630:
-		if (sd->fr_h_sz == 18) { /* SN9C103 */
-			sn9c10x = initOv7630_3;
-			l = sizeof initOv7630_3;
-		} else
-			sn9c10x = initOv7630;
-		reg17_19[0] = 0x68;
-		reg17_19[1] = (mode << 4) | COMP2;
-		reg17_19[2] = MCK_INIT1;
-		break;
-	case SENSOR_PAS106:
-		sn9c10x = initPas106;
-		reg17_19[0] = 0x24;		/* 0x28 */
-		reg17_19[1] = (mode << 4) | COMP1;
-		reg17_19[2] = MCK_INIT1;
-		break;
 	case SENSOR_PAS202:
-		sn9c10x = initPas202;
-		reg17_19[0] = mode ? 0x24 : 0x20;
-		reg17_19[1] = (mode << 4) | 0x89;
-		reg17_19[2] = 0x20;
+		reg12_19[5] = mode ? 0x24 : 0x20;
 		break;
-	case SENSOR_TAS5110:
-		sn9c10x = initTas5110;
-		reg17_19[0] = 0x60;
-		reg17_19[1] = (mode << 4) | 0x86;
-		reg17_19[2] = 0x2b;		/* 0xf3; */
-		break;
-	default:
-/*	case SENSOR_TAS5130CXX: */
-		sn9c10x = initTas5130;
-		reg17_19[0] = 0x60;
-		reg17_19[1] = (mode << 4) | COMP;
-		reg17_19[2] = mode ? 0x23 : 0x43;
+	case SENSOR_TAS5130CXX:
+		/* probably not mode specific at all most likely the upper
+		   nibble of 0x19 is exposure (clock divider) just as with
+		   the tas5110, we need someone to test this. */
+		reg12_19[7] = mode ? 0x23 : 0x43;
 		break;
 	}
+	/* Disable compression when the raw bayer format has been selected */
+	if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW)
+		reg12_19[6] &= ~0x80;
+
+	/* Vga mode emulation on SIF sensor? */
+	if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_REDUCED_SIF) {
+		reg12_19[0] += 16; /* 0x12: hstart adjust */
+		reg12_19[1] += 24; /* 0x13: vstart adjust */
+		reg12_19[3] = 320 / 16; /* 0x15: hsize */
+		reg12_19[4] = 240 / 16; /* 0x16: vsize */
+	}
 
 	/* reg 0x01 bit 2 video transfert on */
 	reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1);
 	/* reg 0x17 SensorClk enable inv Clk 0x60 */
 	reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1);
 	/* Set the registers from the template */
-	reg_w_big(gspca_dev, 0x01, sn9c10x, l);
-	switch (sd->sensor) {
-	case SENSOR_HV7131R:
-		i2c_w_vector(gspca_dev, hv7131_sensor_init,
-				sizeof hv7131_sensor_init);
-		break;
-	case SENSOR_OV6650:
-		i2c_w_vector(gspca_dev, ov6650_sensor_init,
-				sizeof ov6650_sensor_init);
-		break;
-	case SENSOR_OV7630:
-		i2c_w_vector(gspca_dev, ov7630_sensor_init,
-				sizeof ov7630_sensor_init);
-		if (sd->fr_h_sz == 18) { /* SN9C103 */
-			const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00,
-						0x00, 0x00, 0x10 };
-			i2c_w(gspca_dev, i2c);
-		}
-		break;
-	case SENSOR_PAS106:
-		pas106_i2cinit(gspca_dev);
-		break;
-	case SENSOR_PAS202:
-		i2c_w_vector(gspca_dev, pas202_sensor_init,
-				sizeof pas202_sensor_init);
-		break;
-	case SENSOR_TAS5110:
-		i2c_w_vector(gspca_dev, tas5110_sensor_init,
-				sizeof tas5110_sensor_init);
-		break;
-	default:
-/*	case SENSOR_TAS5130CXX: */
-		i2c_w_vector(gspca_dev, tas5130_sensor_init,
-				sizeof tas5130_sensor_init);
-		break;
-	}
+	reg_w(gspca_dev, 0x01, sn9c10x, l);
+
+	/* Init the sensor */
+	i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init,
+			sensor_data[sd->sensor].sensor_init_size);
+	if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge])
+		i2c_w_vector(gspca_dev,
+			sensor_data[sd->sensor].sensor_bridge_init[sd->bridge],
+			sensor_data[sd->sensor].sensor_bridge_init_size[
+				sd->bridge]);
+
 	/* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
-	reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2);
+	reg_w(gspca_dev, 0x15, &reg12_19[3], 2);
 	/* compression register */
-	reg_w(gspca_dev, 0x18, &reg17_19[1], 1);
+	reg_w(gspca_dev, 0x18, &reg12_19[6], 1);
 	/* H_start */
-	reg_w(gspca_dev, 0x12, &sn9c10x[0x12 - 1], 1);
+	reg_w(gspca_dev, 0x12, &reg12_19[0], 1);
 	/* V_START */
-	reg_w(gspca_dev, 0x13, &sn9c10x[0x13 - 1], 1);
+	reg_w(gspca_dev, 0x13, &reg12_19[1], 1);
 	/* reset 0x17 SensorClk enable inv Clk 0x60 */
 				/*fixme: ov7630 [17]=68 8f (+20 if 102)*/
-	reg_w(gspca_dev, 0x17, &reg17_19[0], 1);
+	reg_w(gspca_dev, 0x17, &reg12_19[5], 1);
 	/*MCKSIZE ->3 */	/*fixme: not ov7630*/
-	reg_w(gspca_dev, 0x19, &reg17_19[2], 1);
+	reg_w(gspca_dev, 0x19, &reg12_19[7], 1);
 	/* AE_STRX AE_STRY AE_ENDX AE_ENDY */
 	reg_w(gspca_dev, 0x1c, &sn9c10x[0x1c - 1], 4);
 	/* Enable video transfert */
 	reg_w(gspca_dev, 0x01, &sn9c10x[0], 1);
 	/* Compression */
-	reg_w(gspca_dev, 0x18, &reg17_19[1], 2);
+	reg_w(gspca_dev, 0x18, &reg12_19[6], 2);
 	msleep(20);
 
 	sd->reg11 = -1;
@@ -957,18 +980,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
-	__u8 ByteSend;
-
-	ByteSend = 0x09;	/* 0X00 */
-	reg_w(gspca_dev, 0x01, &ByteSend, 1);
-}
-
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
+	sd_init(gspca_dev);
 }
 
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
@@ -978,6 +990,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 {
 	int i;
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
 
 	/* frames start with:
 	 *	ff ff 00 c4 c4 96	synchro
@@ -998,20 +1011,31 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			    && data[5 + i] == 0x96) {	/* start of frame */
 				int lum = -1;
 				int pkt_type = LAST_PACKET;
+				int fr_h_sz = (sd->bridge == BRIDGE_103) ?
+					18 : 12;
 
-				if (len - i < sd->fr_h_sz) {
+				if (len - i < fr_h_sz) {
 					PDEBUG(D_STREAM, "packet too short to"
 						" get avg brightness");
-				} else if (sd->fr_h_sz == 12) {
-					lum = data[i + 8] + (data[i + 9] << 8);
-				} else {
+				} else if (sd->bridge == BRIDGE_103) {
 					lum = data[i + 9] +
 						(data[i + 10] << 8);
+				} else {
+					lum = data[i + 8] + (data[i + 9] << 8);
 				}
-				if (lum == 0) {
+				/* When exposure changes midway a frame we
+				   get a lum of 0 in this case drop 2 frames
+				   as the frames directly after an exposure
+				   change have an unstable image. Sometimes lum
+				   *really* is 0 (cam used in low light with
+				   low exposure setting), so do not drop frames
+				   if the previous lum was 0 too. */
+				if (lum == 0 && sd->prev_avg_lum != 0) {
 					lum = -1;
 					sd->frames_to_drop = 2;
-				}
+					sd->prev_avg_lum = 0;
+				} else
+					sd->prev_avg_lum = lum;
 				atomic_set(&sd->avg_lum, lum);
 
 				if (sd->frames_to_drop) {
@@ -1021,14 +1045,25 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 
 				frame = gspca_frame_add(gspca_dev, pkt_type,
 							frame, data, 0);
-				data += i + sd->fr_h_sz;
-				len -= i + sd->fr_h_sz;
+				data += i + fr_h_sz;
+				len -= i + fr_h_sz;
 				gspca_frame_add(gspca_dev, FIRST_PACKET,
 						frame, data, len);
 				return;
 			}
 		}
 	}
+
+	if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) {
+		/* In raw mode we sometimes get some garbage after the frame
+		   ignore this */
+		int used = frame->data_end - frame->data;
+		int size = cam->cam_mode[gspca_dev->curr_mode].sizeimage;
+
+		if (used + len > size)
+			len = size - used;
+	}
+
 	gspca_frame_add(gspca_dev, INTER_PACKET,
 			frame, data, len);
 }
@@ -1162,58 +1197,45 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
+	.dq_callback = do_autogain,
 };
 
 /* -- module initialisation -- */
-#define SFCI(sensor, flags, nctrls, i2c_addr) \
-	.driver_info = (SENSOR_ ## sensor << 24) \
-			| ((flags) << 16) \
-			| ((nctrls) << 8) \
-			| (i2c_addr)
+#define SB(sensor, bridge) \
+	.driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge
+
+
 static __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_SN9C102
-	{USB_DEVICE(0x0c45, 0x6001),			/* SN9C102 */
-			SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
-	{USB_DEVICE(0x0c45, 0x6005),			/* SN9C101 */
-			SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
-	{USB_DEVICE(0x0c45, 0x6007),			/* SN9C101 */
-			SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
-	{USB_DEVICE(0x0c45, 0x6009),			/* SN9C101 */
-			SFCI(PAS106, F_SIF, 2, 0)},
-	{USB_DEVICE(0x0c45, 0x600d),			/* SN9C101 */
-			SFCI(PAS106, F_SIF, 2, 0)},
+	{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, /* TAS5110C1B */
+	{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, /* TAS5110C1B */
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+	{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, /* TAS5110D */
+	{USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
+	{USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
 #endif
-	{USB_DEVICE(0x0c45, 0x6011),		/* SN9C101 - SN9C101G */
-			SFCI(OV6650, F_GAIN|F_AUTO|F_SIF, 5, 0x60)},
-#ifndef CONFIG_USB_SN9C102
-	{USB_DEVICE(0x0c45, 0x6019),			/* SN9C101 */
-			SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
-	{USB_DEVICE(0x0c45, 0x6024),			/* SN9C102 */
-			SFCI(TAS5130CXX, 0, 2, 0)},
-	{USB_DEVICE(0x0c45, 0x6025),			/* SN9C102 */
-			SFCI(TAS5130CXX, 0, 2, 0)},
-	{USB_DEVICE(0x0c45, 0x6028),			/* SN9C102 */
-			SFCI(PAS202, 0, 2, 0)},
-	{USB_DEVICE(0x0c45, 0x6029),			/* SN9C101 */
-			SFCI(PAS106, F_SIF, 2, 0)},
-	{USB_DEVICE(0x0c45, 0x602c),			/* SN9C102 */
-			SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
-	{USB_DEVICE(0x0c45, 0x602d),			/* SN9C102 */
-			SFCI(HV7131R, 0, 2, 0)},
-	{USB_DEVICE(0x0c45, 0x602e),			/* SN9C102 */
-			SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
-	{USB_DEVICE(0x0c45, 0x60af),			/* SN9C103 */
-			SFCI(PAS202, F_H18, 2, 0)},
-	{USB_DEVICE(0x0c45, 0x60b0),			/* SN9C103 */
-			SFCI(OV7630, F_GAIN|F_AUTO|F_H18, 5, 0x21)},
+	{USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+	{USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)},
+	{USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)},
+	{USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)},
+	{USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)},
+	{USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
+	{USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
 #endif
+	{USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+	{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
+#endif
+	{USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+	{USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
+#endif
+	{USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1231,6 +1253,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 33a3df1f691..d75b1d20b31 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -32,7 +32,7 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 
-	int avg_lum;
+	atomic_t avg_lum;
 	unsigned int exposure;
 
 	unsigned short brightness;
@@ -54,8 +54,10 @@ struct sd {
 #define SENSOR_HV7131R 0
 #define SENSOR_MI0360 1
 #define SENSOR_MO4000 2
-#define SENSOR_OV7648 3
-#define SENSOR_OV7660 4
+#define SENSOR_OM6802 3
+#define SENSOR_OV7630 4
+#define SENSOR_OV7648 5
+#define SENSOR_OV7660 6
 	unsigned char i2c_base;
 };
 
@@ -76,7 +78,8 @@ static struct ctrl sd_ctrls[] = {
 		.type    = V4L2_CTRL_TYPE_INTEGER,
 		.name    = "Brightness",
 		.minimum = 0,
-		.maximum = 0xffff,
+#define BRIGHTNESS_MAX 0xffff
+		.maximum = BRIGHTNESS_MAX,
 		.step    = 1,
 #define BRIGHTNESS_DEF 0x7fff
 		.default_value = BRIGHTNESS_DEF,
@@ -90,7 +93,8 @@ static struct ctrl sd_ctrls[] = {
 		.type    = V4L2_CTRL_TYPE_INTEGER,
 		.name    = "Contrast",
 		.minimum = 0,
-		.maximum = 127,
+#define CONTRAST_MAX 127
+		.maximum = CONTRAST_MAX,
 		.step    = 1,
 #define CONTRAST_DEF 63
 		.default_value = CONTRAST_DEF,
@@ -104,14 +108,15 @@ static struct ctrl sd_ctrls[] = {
 		.type    = V4L2_CTRL_TYPE_INTEGER,
 		.name    = "Color",
 		.minimum = 0,
-		.maximum = 255,
+		.maximum = 64,
 		.step    = 1,
-#define COLOR_DEF 127
+#define COLOR_DEF 32
 		.default_value = COLOR_DEF,
 	    },
 	    .set = sd_setcolors,
 	    .get = sd_getcolors,
 	},
+#define AUTOGAIN_IDX 3
 	{
 	    {
 		.id      = V4L2_CID_AUTOGAIN,
@@ -131,7 +136,7 @@ static struct ctrl sd_ctrls[] = {
 static struct v4l2_pix_format vga_mode[] = {
 	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 3 / 8 + 590,
+		.sizeimage = 160 * 120 * 4 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 2},
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
@@ -148,55 +153,83 @@ static struct v4l2_pix_format vga_mode[] = {
 
 /*Data from sn9c102p+hv71331r */
 static const __u8 sn_hv7131[] = {
-/*	reg0  reg1  reg2  reg3  reg4  reg5  reg6  reg7  reg8  reg9 */
-	0x00, 0x03, 0x64, 0x00, 0x1A, 0x20, 0x20, 0x20, 0xA1, 0x11,
-/*	rega  regb  regc  regd  rege  regf  reg10 reg11 */
-	0x02, 0x09, 0x00, 0x00, 0x00, 0x10, 0x03, 0x00,		/* 00 */
-/*	reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a reg1b */
-	0x00, 0x01, 0x03, 0x28, 0x1e, 0x41, 0x0a, 0x00, 0x00, 0x00,
-/*	reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x03,	0x64,	0x00,	0x1a,	0x20,	0x20,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0xa1,	0x11,	0x02,	0x09,	0x00,	0x00,	0x00,	0x10,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x00,	0x01,	0x03,	0x28,	0x1e,	0x41,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x0a,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00
 };
 
 static const __u8 sn_mi0360[] = {
-/*	reg0  reg1  reg2  reg3  reg4  reg5  reg6  reg7  reg8  reg9 */
-	0x00, 0x61, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0xb1, 0x5d,
-/*	rega  regb  regc  regd  rege  regf  reg10 reg11 */
-	0x07, 0x00, 0x00, 0x00, 0x00, 0x10, 0x03, 0x00,
-/*	reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a reg1b */
-	0x00, 0x02, 0x0a, 0x28, 0x1e, 0x61, 0x06, 0x00, 0x00, 0x00,
-/*	reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x61,	0x44,	0x00,	0x1a,	0x20,	0x20,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0xb1,	0x5d,	0x07,	0x00,	0x00,	0x00,	0x00,	0x10,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x00,	0x02,	0x0a,	0x28,	0x1e,	0x61,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x06,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00
 };
 
 static const __u8 sn_mo4000[] = {
-/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7	reg8 */
-	0x12,	0x23,	0x60,	0x00,	0x1A,	0x00,	0x20,	0x18,	0x81,
-/*	reg9	rega	regb	regc	regd	rege	regf	reg10	reg11*/
-	0x21,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x03,	0x00,
-/*	reg12	reg13	reg14	reg15	reg16	reg17	reg18	reg19	reg1a*/
-	0x0b,	0x0f,	0x14,	0x28,	0x1e,	0x40,	0x08,	0x00,	0x00,
-/*	reg1b	reg1c	reg1d	reg1e	reg1f	reg20	reg21	reg22	reg23*/
-	0x00,	0x00,	0x00,	0x00,	0x00,	0x08,	0x25,	0x39,	0x4b,
-	0x5c,	0x6b,	0x79,	0x87,	0x95,	0xa2,	0xaf,	0xbb,	0xc7,
-	0xd3,	0xdf,	0xea,	0xf5
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x12,	0x23,	0x60,	0x00,	0x1a,	0x00,	0x20,	0x18,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0x81,	0x21,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	 0x00,	0x0b,	0x0f,	0x14,	0x28,	0x1e,	0x40,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x08,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00
+};
+
+static const __u8 sn_om6802[] = {
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x23,	0x72,	0x00,	0x1a,	0x34,	0x27,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0x80,	0x34,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x51,	0x01,	0x00,	0x28,	0x1e,	0x40,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x05,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
+	0x08,	0x22,	0x44,	0x63,	0x7d,	0x92,	0xa3,	0xaf,
+	0xbc,	0xc4,	0xcd,	0xd5,	0xdc,	0xe1,	0xe8,	0xef,
+	0xf7
+};
+
+static const __u8 sn_ov7630[] = {
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x21,	0x40,	0x00,	0x1a,	0x20,	0x1f,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0xa1,	0x21,	0x76,	0x21,	0x00,	0x00,	0x00,	0x10,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x04,	0x01,	0x0a,	0x28,	0x1e,	0xc2,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x0b,	0x00,	0x00,	0x00,	0x00,	0x00
 };
 
 static const __u8 sn_ov7648[] = {
-	0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20, 0xA1, 0x6E, 0x18, 0x65,
-	0x00, 0x00, 0x00, 0x10, 0x03, 0x00, 0x00, 0x06, 0x06, 0x28, 0x1E, 0x82,
-	0x07, 0x00, 0x00, 0x00, 0x00, 0x00
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x21,	0x62,	0x00,	0x1a,	0x20,	0x20,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0xa1,	0x6e,	0x18,	0x65,	0x00,	0x00,	0x00,	0x10,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x00,	0x06,	0x06,	0x28,	0x1e,	0x82,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x07,	0x00,	0x00,	0x00,	0x00,	0x00
 };
 
 static const __u8 sn_ov7660[]	= {
-/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7	reg8 */
-	0x00,	0x61,	0x40,	0x00,	0x1a,	0x00,	0x00,	0x00,	0x81,
-/* 	reg9	rega	regb	regc	regd	rege	regf	reg10	reg11*/
-	0x21,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x03,	0x00,
-/*	reg12	reg13	reg14	reg15	reg16	reg17	reg18	reg19	reg1a*/
-	0x01,	0x01,	0x14,	0x28,	0x1e,	0x00,	0x07,	0x00,	0x00,
-/*	reg1b	reg1c	reg1d	reg1e	reg1f	reg20	reg21	reg22	reg23*/
-	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x61,	0x40,	0x00,	0x1a,	0x20,	0x20,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0x81,	0x21,	0x07,	0x00,	0x00,	0x00,	0x00,	0x10,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x01,	0x01,	0x08,	0x28,	0x1e,	0x20,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x07,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
 };
 
 /* sequence specific to the sensors - !! index = SENSOR_xxx */
@@ -204,50 +237,22 @@ static const __u8 *sn_tb[] = {
 	sn_hv7131,
 	sn_mi0360,
 	sn_mo4000,
+	sn_om6802,
+	sn_ov7630,
 	sn_ov7648,
 	sn_ov7660
 };
 
-static const __u8 regsn20[] = {
+static const __u8 gamma_def[] = {
 	0x00, 0x2d, 0x46, 0x5a, 0x6c, 0x7c, 0x8b, 0x99,
 	0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff
 };
-static const __u8 regsn20_sn9c120[] = {
-	0x00, 0x25, 0x3c, 0x50, 0x62, 0x72, 0x81, 0x90,
-	0x9e, 0xab, 0xb8, 0xc5, 0xd1, 0xdd, 0xe9, 0xf4, 0xff
-};
-static const __u8 regsn20_sn9c325[] = {
-	0x0a, 0x3a, 0x56, 0x6c, 0x7e, 0x8d, 0x9a, 0xa4,
-	0xaf, 0xbb, 0xc5, 0xcd, 0xd5, 0xde, 0xe8, 0xed, 0xf5
-};
 
 static const __u8 reg84[] = {
 	0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe5, 0x0f,
 	0xe4, 0x0f, 0x38, 0x00, 0x3e, 0x00, 0xc3, 0x0f,
-/*	0x00, 0x00, 0x00, 0x00, 0x00 */
-	0xf7, 0x0f, 0x0a, 0x00, 0x00
-};
-static const __u8 reg84_sn9c120_1[] = {
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x0c, 0x00, 0x00
-};
-static const __u8 reg84_sn9c120_2[] = {
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x0c, 0x02, 0x3b
+	0xf7, 0x0f, 0x00, 0x00, 0x00
 };
-static const __u8 reg84_sn9c120_3[] = {
-	0x14, 0x00, 0x27, 0x00, 0x08, 0x00, 0xeb, 0x0f,
-	0xd5, 0x0f, 0x42, 0x00, 0x41, 0x00, 0xca, 0x0f,
-	0xf5, 0x0f, 0x0c, 0x02, 0x3b
-};
-static const __u8 reg84_sn9c325[] = {
-	0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe4, 0x0f,
-	0xd3, 0x0f, 0x4b, 0x00, 0x48, 0x00, 0xc0, 0x0f,
-	0xf8, 0x0f, 0x00, 0x00, 0x00
-};
-
 static const __u8 hv7131r_sensor_init[][8] = {
 	{0xC1, 0x11, 0x01, 0x08, 0x01, 0x00, 0x00, 0x10},
 	{0xB1, 0x11, 0x34, 0x17, 0x7F, 0x00, 0x00, 0x10},
@@ -356,21 +361,105 @@ static const __u8 mo4000_sensor_init[][8] = {
 	{0xa1, 0x21, 0x11, 0x38, 0x00, 0x00, 0x00, 0x10},
 	{}
 };
+static __u8 om6802_sensor_init[][8] = {
+	{0xa0, 0x34, 0x90, 0x05, 0x00, 0x00, 0x00, 0x10},
+	{0xa0, 0x34, 0x49, 0x85, 0x00, 0x00, 0x00, 0x10},
+	{0xa0, 0x34, 0x5a, 0xc0, 0x00, 0x00, 0x00, 0x10},
+	{0xa0, 0x34, 0xdd, 0x18, 0x00, 0x00, 0x00, 0x10},
+/*	{0xa0, 0x34, 0xfb, 0x11, 0x00, 0x00, 0x00, 0x10}, */
+	{0xa0, 0x34, 0xf0, 0x04, 0x00, 0x00, 0x00, 0x10},
+					/* white balance & auto-exposure */
+/*	{0xa0, 0x34, 0xf1, 0x02, 0x00, 0x00, 0x00, 0x10},
+							 * set color mode */
+/*	{0xa0, 0x34, 0xfe, 0x5b, 0x00, 0x00, 0x00, 0x10},
+						 * max AGC value in AE */
+/*	{0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10},
+							 * preset AGC */
+/*	{0xa0, 0x34, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x10},
+						 * preset brightness */
+/*	{0xa0, 0x34, 0xe7, 0x00, 0x00, 0x00, 0x00, 0x10},
+							 * preset contrast */
+/*	{0xa0, 0x34, 0xe8, 0x31, 0x00, 0x00, 0x00, 0x10},
+							 * preset gamma */
+	{0xa0, 0x34, 0xe9, 0x0f, 0x00, 0x00, 0x00, 0x10},
+					/* luminance mode (0x4f = AE) */
+	{0xa0, 0x34, 0xe4, 0xff, 0x00, 0x00, 0x00, 0x10},
+							/* preset shutter */
+/*	{0xa0, 0x34, 0xef, 0x00, 0x00, 0x00, 0x00, 0x10},
+							 * auto frame rate */
+/*	{0xa0, 0x34, 0xfb, 0xee, 0x00, 0x00, 0x00, 0x10}, */
+
+/*	{0xa0, 0x34, 0x71, 0x84, 0x00, 0x00, 0x00, 0x10}, */
+/*	{0xa0, 0x34, 0x72, 0x05, 0x00, 0x00, 0x00, 0x10}, */
+/*	{0xa0, 0x34, 0x68, 0x80, 0x00, 0x00, 0x00, 0x10}, */
+/*	{0xa0, 0x34, 0x69, 0x01, 0x00, 0x00, 0x00, 0x10}, */
+	{}
+};
+static const __u8 ov7630_sensor_init[][8] = {
+	{0xa1, 0x21, 0x76, 0x01, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
+/* win: delay 20ms */
+	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
+/* win: delay 20ms */
+	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+/* win: i2c_r from 00 to 80 */
+	{0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10},
+	{0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10},
+	{0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
+	{0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x1f, 0x00, 0x80, 0x80, 0x80, 0x10},
+	{0xd1, 0x21, 0x23, 0xde, 0x10, 0x8a, 0xa0, 0x10},
+	{0xc1, 0x21, 0x27, 0xca, 0xa2, 0x74, 0x00, 0x10},
+	{0xd1, 0x21, 0x2a, 0x88, 0x00, 0x88, 0x01, 0x10},
+	{0xc1, 0x21, 0x2e, 0x80, 0x00, 0x18, 0x00, 0x10},
+	{0xa1, 0x21, 0x21, 0x08, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x22, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xb1, 0x21, 0x32, 0xc2, 0x08, 0x00, 0x00, 0x10},
+	{0xb1, 0x21, 0x4c, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x60, 0x05, 0x40, 0x12, 0x57, 0x10},
+	{0xa1, 0x21, 0x64, 0x73, 0x00, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x65, 0x00, 0x55, 0x01, 0xac, 0x10},
+	{0xa1, 0x21, 0x69, 0x38, 0x00, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x6f, 0x1f, 0x01, 0x00, 0x10, 0x10},
+	{0xd1, 0x21, 0x73, 0x50, 0x20, 0x02, 0x01, 0x10},
+	{0xd1, 0x21, 0x77, 0xf3, 0x90, 0x98, 0x98, 0x10},
+	{0xc1, 0x21, 0x7b, 0x00, 0x4c, 0xf7, 0x00, 0x10},
+	{0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
+	{0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
+/* */
+	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+/*fixme: + 0x12, 0x04*/
+	{0xa1, 0x21, 0x75, 0x82, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x10, 0x32, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10},
+/* */
+	{0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10},
+/* */
+	{0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10},
+/*	{0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */
+	{}
+};
 static const __u8 ov7660_sensor_init[][8] = {
 	{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */
 /*		(delay 20ms) */
 	{0xa1, 0x21, 0x12, 0x05, 0x00, 0x00, 0x00, 0x10},
-						/* Outformat ?? rawRGB */
+						/* Outformat = rawRGB */
 	{0xa1, 0x21, 0x13, 0xb8, 0x00, 0x00, 0x00, 0x10}, /* init COM8 */
-	{0xd1, 0x21, 0x00, 0x01, 0x74, 0x92, 0x00, 0x10},
-/*	{0xd1, 0x21, 0x00, 0x01, 0x74, 0x74, 0x00, 0x10}, */
+	{0xd1, 0x21, 0x00, 0x01, 0x74, 0x74, 0x00, 0x10},
 						/* GAIN BLUE RED VREF */
 	{0xd1, 0x21, 0x04, 0x00, 0x7d, 0x62, 0x00, 0x10},
 						/* COM 1 BAVE GEAVE AECHH */
 	{0xb1, 0x21, 0x08, 0x83, 0x01, 0x00, 0x00, 0x10}, /* RAVE COM2 */
 	{0xd1, 0x21, 0x0c, 0x00, 0x08, 0x04, 0x4f, 0x10}, /* COM 3 4 5 6 */
-	{0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xf8, 0x10},
-/*	{0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10}, */
+	{0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10},
 						/* AECH CLKRC COM7 COM8 */
 	{0xc1, 0x21, 0x14, 0x2c, 0x00, 0x02, 0x00, 0x10}, /* COM9 COM10 */
 	{0xd1, 0x21, 0x17, 0x10, 0x60, 0x02, 0x7b, 0x10},
@@ -379,8 +468,8 @@ static const __u8 ov7660_sensor_init[][8] = {
 	{0xb1, 0x21, 0x1e, 0x01, 0x0e, 0x00, 0x00, 0x10}, /* MVFP LAEC */
 	{0xd1, 0x21, 0x20, 0x07, 0x07, 0x07, 0x07, 0x10},
 					/* BOS GBOS GROS ROS (BGGR offset) */
-	{0xd1, 0x21, 0x24, 0x68, 0x58, 0xd4, 0x80, 0x10},
-/*	{0xd1, 0x21, 0x24, 0x78, 0x68, 0xd4, 0x80, 0x10}, */
+/*	{0xd1, 0x21, 0x24, 0x68, 0x58, 0xd4, 0x80, 0x10}, */
+	{0xd1, 0x21, 0x24, 0x78, 0x68, 0xd4, 0x80, 0x10},
 						/* AEW AEB VPT BBIAS */
 	{0xd1, 0x21, 0x28, 0x80, 0x30, 0x00, 0x00, 0x10},
 						/* GbBIAS RSVD EXHCH EXHCL */
@@ -407,9 +496,9 @@ static const __u8 ov7660_sensor_init[][8] = {
 	{0xd1, 0x21, 0x62, 0x00, 0x00, 0x50, 0x30, 0x10},
 						/* LCC1 LCC2 LCC3 LCC4 */
 	{0xa1, 0x21, 0x66, 0x00, 0x00, 0x00, 0x00, 0x10}, /* LCC5 */
-	{0xd1, 0x21, 0x67, 0x80, 0x7a, 0x90, 0x80, 0x10},
+	{0xd1, 0x21, 0x67, 0x80, 0x7a, 0x90, 0x80, 0x10}, /* MANU */
 	{0xa1, 0x21, 0x6b, 0x0a, 0x00, 0x00, 0x00, 0x10},
-					/* band gap reference [0..3] DBLV */
+					/* band gap reference [0:3] DBLV */
 	{0xd1, 0x21, 0x6c, 0x30, 0x48, 0x80, 0x74, 0x10}, /* gamma curve */
 	{0xd1, 0x21, 0x70, 0x64, 0x60, 0x5c, 0x58, 0x10}, /* gamma curve */
 	{0xd1, 0x21, 0x74, 0x54, 0x4c, 0x40, 0x38, 0x10}, /* gamma curve */
@@ -419,37 +508,35 @@ static const __u8 ov7660_sensor_init[][8] = {
 	{0xd1, 0x21, 0x84, 0x6e, 0x77, 0x87, 0x95, 0x10}, /* gamma curve */
 	{0xc1, 0x21, 0x88, 0xaf, 0xc7, 0xdf, 0x00, 0x10}, /* gamma curve */
 	{0xc1, 0x21, 0x8b, 0x99, 0x99, 0xcf, 0x00, 0x10}, /* reserved */
-	{0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, /* DM_LNL/H */
 /****** (some exchanges in the win trace) ******/
-	{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, /* MVFP */
 						/* bits[3..0]reserved */
 	{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10},
 						/* VREF vertical frame ctrl */
 	{0xa1, 0x21, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x10, 0x20, 0x00, 0x00, 0x00, 0x10}, /* 0x20 */
-	{0xa1, 0x21, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10},
-/*	{0xa1, 0x21, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x10}, */
-	{0xa1, 0x21, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x10},
-	{0xb1, 0x21, 0x01, 0x78, 0x78, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x10, 0x20, 0x00, 0x00, 0x00, 0x10}, /* AECH 0x20 */
+	{0xa1, 0x21, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x10}, /* ADVFL */
+	{0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10}, /* ADVFH */
+	{0xa1, 0x21, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x10}, /* GAIN */
+/*	{0xb1, 0x21, 0x01, 0x78, 0x78, 0x00, 0x00, 0x10}, * BLUE */
 /****** (some exchanges in the win trace) ******/
 	{0xa1, 0x21, 0x93, 0x00, 0x00, 0x00, 0x00, 0x10},/* dummy line hight */
-	{0xa1, 0x21, 0x92, 0x25, 0x00, 0x00, 0x00, 0x10},/* dummy line low */
-	{0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x02, 0x90, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x92, 0x25, 0x00, 0x00, 0x00, 0x10}, /* dummy line low */
+	{0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCH */
+	{0xa1, 0x21, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCL */
+/*	{0xa1, 0x21, 0x02, 0x90, 0x00, 0x00, 0x00, 0x10},  * RED */
 /****** (some exchanges in the win trace) ******/
-/**********startsensor KO if changed !!****/
+/******!! startsensor KO if changed !!****/
 	{0xa1, 0x21, 0x93, 0x01, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x92, 0xff, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x2b, 0xc3, 0x00, 0x00, 0x00, 0x10},
-/* here may start the isoc exchanges */
 	{}
 };
-/* reg0x04		reg0x07		reg 0x10 */
-/* expo  = (COM1 & 0x02) | (AECHH & 0x2f <<10) [ (AECh << 2) */
+/*	  reg 0x04	  reg 0x07		   reg 0x10 */
+/* expo = (COM1 & 0x02) | ((AECHH & 0x2f) << 10) | (AECh << 2) */
 
 static const __u8 ov7648_sensor_init[][8] = {
 	{0xC1, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00},
@@ -526,10 +613,16 @@ static const __u8 qtable4[] = {
 	0x29, 0x29, 0x29, 0x29
 };
 
-/* read <len> bytes (len < sizeof gspca_dev->usb_buf) to gspca_dev->usb_buf */
+/* read <len> bytes to gspca_dev->usb_buf */
 static void reg_r(struct gspca_dev *gspca_dev,
 		  __u16 value, int len)
 {
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
+		err("reg_r: buffer overflow");
+		return;
+	}
+#endif
 	usb_control_msg(gspca_dev->dev,
 			usb_rcvctrlpipe(gspca_dev->dev, 0),
 			0,
@@ -562,29 +655,20 @@ static void reg_w(struct gspca_dev *gspca_dev,
 {
 	PDEBUG(D_USBO, "reg_w [%02x] = %02x %02x ..",
 		value, buffer[0], buffer[1]);
-	if (len <= sizeof gspca_dev->usb_buf) {
-		memcpy(gspca_dev->usb_buf, buffer, len);
-		usb_control_msg(gspca_dev->dev,
-				usb_sndctrlpipe(gspca_dev->dev, 0),
-				0x08,
-			   USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-				value, 0,
-				gspca_dev->usb_buf, len,
-				500);
-	} else {
-		__u8 *tmpbuf;
-
-		tmpbuf = kmalloc(len, GFP_KERNEL);
-		memcpy(tmpbuf, buffer, len);
-		usb_control_msg(gspca_dev->dev,
-				usb_sndctrlpipe(gspca_dev->dev, 0),
-				0x08,
-			   USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-				value, 0,
-				tmpbuf, len,
-				500);
-		kfree(tmpbuf);
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
+		err("reg_w: buffer overflow");
+		return;
 	}
+#endif
+	memcpy(gspca_dev->usb_buf, buffer, len);
+	usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
+			0x08,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			value, 0,
+			gspca_dev->usb_buf, len,
+			500);
 }
 
 /* I2C write 1 byte */
@@ -680,13 +764,12 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 	const __u8 *reg9a;
 	static const __u8 reg9a_def[] =
 		{0x08, 0x40, 0x20, 0x10, 0x00, 0x04};
-	static const __u8 reg9a_sn9c120[] =		/* from win trace */
-		{0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
 	static const __u8 reg9a_sn9c325[] =
 		{0x0a, 0x40, 0x38, 0x30, 0x00, 0x20};
+	static const __u8 regd4[] = {0x60, 0x00, 0x00};
 
 	reg_w1(gspca_dev, 0xf1, 0x00);
-	reg_w1(gspca_dev, 0x01, sn9c1xx[0]);	/*fixme:jfm was [1] en v1*/
+	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
 
 	/* configure gpio */
 	reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2);
@@ -696,39 +779,51 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 	case BRIDGE_SN9C325:
 		reg9a = reg9a_sn9c325;
 		break;
-	case BRIDGE_SN9C120:
-		reg9a = reg9a_sn9c120;
-		break;
 	default:
 		reg9a = reg9a_def;
 		break;
 	}
 	reg_w(gspca_dev, 0x9a, reg9a, 6);
 
-	reg_w1(gspca_dev, 0xd4, 0x60);	/*fixme:jfm 60 00 00 (3) ? */
+	reg_w(gspca_dev, 0xd4, regd4, sizeof regd4); /*fixme:jfm was 60 only*/
 
 	reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
 
-	switch (sd->bridge) {
-	case BRIDGE_SN9C120:			/* from win trace */
+	switch (sd->sensor) {
+	case SENSOR_OM6802:
+		reg_w1(gspca_dev, 0x02, 0x71);
+		reg_w1(gspca_dev, 0x01, 0x42);
+		reg_w1(gspca_dev, 0x17, 0x64);
+		reg_w1(gspca_dev, 0x01, 0x42);
+		break;
+/*jfm: from win trace */
+	case SENSOR_OV7630:
 		reg_w1(gspca_dev, 0x01, 0x61);
-		reg_w1(gspca_dev, 0x17, 0x20);
+		reg_w1(gspca_dev, 0x17, 0xe2);
 		reg_w1(gspca_dev, 0x01, 0x60);
+		reg_w1(gspca_dev, 0x01, 0x40);
 		break;
-	case BRIDGE_SN9C325:
+	case SENSOR_OV7648:
 		reg_w1(gspca_dev, 0x01, 0x43);
 		reg_w1(gspca_dev, 0x17, 0xae);
 		reg_w1(gspca_dev, 0x01, 0x42);
 		break;
+/*jfm: from win trace */
+	case SENSOR_OV7660:
+		reg_w1(gspca_dev, 0x01, 0x61);
+		reg_w1(gspca_dev, 0x17, 0x20);
+		reg_w1(gspca_dev, 0x01, 0x60);
+		reg_w1(gspca_dev, 0x01, 0x40);
+		break;
 	default:
 		reg_w1(gspca_dev, 0x01, 0x43);
 		reg_w1(gspca_dev, 0x17, 0x61);
 		reg_w1(gspca_dev, 0x01, 0x42);
-	}
-
-	if (sd->sensor == SENSOR_HV7131R) {
-		if (probesensor(gspca_dev) < 0)
-			return -ENODEV;
+		if (sd->sensor == SENSOR_HV7131R) {
+			if (probesensor(gspca_dev) < 0)
+				return -ENODEV;
+		}
+		break;
 	}
 	return 0;
 }
@@ -766,6 +861,40 @@ static void mo4000_InitSensor(struct gspca_dev *gspca_dev)
 	}
 }
 
+static void om6802_InitSensor(struct gspca_dev *gspca_dev)
+{
+	int i = 0;
+
+	while (om6802_sensor_init[i][0]) {
+		i2c_w8(gspca_dev, om6802_sensor_init[i]);
+		i++;
+	}
+}
+
+static void ov7630_InitSensor(struct gspca_dev *gspca_dev)
+{
+	int i = 0;
+
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);	/* 76 01 */
+	i++;
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);	/* 12 c8 (RGB+SRST) */
+	i++;
+	msleep(20);
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);	/* 12 48 */
+	i++;
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);	/* 12 c8 */
+	i++;
+	msleep(20);
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);	/* 12 48 */
+	i++;
+/*jfm:win i2c_r from 00 to 80*/
+
+	while (ov7630_sensor_init[i][0]) {
+		i2c_w8(gspca_dev, ov7630_sensor_init[i]);
+		i++;
+	}
+}
+
 static void ov7648_InitSensor(struct gspca_dev *gspca_dev)
 {
 	int i = 0;
@@ -810,11 +939,21 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->contrast = CONTRAST_DEF;
 	sd->colors = COLOR_DEF;
 	sd->autogain = AUTOGAIN_DEF;
+	sd->ag_cnt = -1;
+
+	switch (sd->sensor) {
+	case SENSOR_OV7630:
+	case SENSOR_OV7648:
+	case SENSOR_OV7660:
+		gspca_dev->ctrl_dis = (1 << AUTOGAIN_IDX);
+		break;
+	}
+
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 /*	const __u8 *sn9c1xx; */
@@ -823,10 +962,11 @@ static int sd_open(struct gspca_dev *gspca_dev)
 
 	/* setup a selector by bridge */
 	reg_w1(gspca_dev, 0xf1, 0x01);
-	reg_r(gspca_dev, 0x00, 1);		/* -> regF1 = 0x00 */
-	reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]);
 	reg_r(gspca_dev, 0x00, 1);
+	reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]);
+	reg_r(gspca_dev, 0x00, 1);		/* get sonix chip id */
 	regF1 = gspca_dev->usb_buf[0];
+	PDEBUG(D_PROBE, "Sonix chip id: %02x", regF1);
 	switch (sd->bridge) {
 	case BRIDGE_SN9C102P:
 		if (regF1 != 0x11)
@@ -917,16 +1057,53 @@ static unsigned int setexposure(struct gspca_dev *gspca_dev,
 			| ((expoMo10[3] & 0x30) >> 4));
 		break;
 	    }
+	case SENSOR_OM6802: {
+		__u8 gainOm[] =
+			{ 0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10 };
+
+		if (expo > 0x03ff)
+			expo = 0x03ff;
+		 if (expo < 0x0001)
+			expo = 0x0001;
+		gainOm[3] = expo >> 2;
+		i2c_w8(gspca_dev, gainOm);
+		reg_w1(gspca_dev, 0x96, (expo >> 5) & 0x1f);
+		PDEBUG(D_CONF, "set exposure %d", gainOm[3]);
+		break;
+	    }
 	}
 	return expo;
 }
 
+/* this function is used for sensors o76xx only */
+static void setbrightcont(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	unsigned val;
+	__u8 reg84_full[0x15];
+
+	memset(reg84_full, 0, sizeof reg84_full);
+	val = sd->contrast * 0x20 / CONTRAST_MAX + 0x10;	/* 10..30 */
+	reg84_full[2] = val;
+	reg84_full[0] = (val + 1) / 2;
+	reg84_full[4] = (val + 1) / 5;
+	if (val > BRIGHTNESS_DEF)
+		val = (sd->brightness - BRIGHTNESS_DEF) * 0x20
+			/ BRIGHTNESS_MAX;
+	else
+		val = 0;
+	reg84_full[0x12] = val;			/* 00..1f */
+	reg_w(gspca_dev, 0x84, reg84_full, sizeof reg84_full);
+}
+
+/* sensor != ov76xx */
 static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	unsigned int expo;
 	__u8 k2;
 
+	k2 = sd->brightness >> 10;
 	switch (sd->sensor) {
 	case SENSOR_HV7131R:
 		expo = sd->brightness << 4;
@@ -937,29 +1114,27 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 		sd->exposure = setexposure(gspca_dev, expo);
 		break;
 	case SENSOR_MI0360:
+	case SENSOR_MO4000:
 		expo = sd->brightness >> 4;
 		sd->exposure = setexposure(gspca_dev, expo);
 		break;
-	case SENSOR_MO4000:
-		expo = sd->brightness >> 4;
+	case SENSOR_OM6802:
+		expo = sd->brightness >> 6;
 		sd->exposure = setexposure(gspca_dev, expo);
+		k2 = sd->brightness >> 11;
 		break;
-	case SENSOR_OV7660:
-		return;				/*jfm??*/
 	}
 
-	k2 = sd->brightness >> 10;
 	reg_w1(gspca_dev, 0x96, k2);
 }
 
+/* sensor != ov76xx */
 static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	__u8 k2;
 	__u8 contrast[] = { 0x00, 0x00, 0x28, 0x00, 0x07, 0x00 };
 
-	if (sd->sensor == SENSOR_OV7660)
-		return;				/*jfm??*/
 	k2 = sd->contrast;
 	contrast[2] = k2;
 	contrast[0] = (k2 + 1) >> 1;
@@ -970,15 +1145,30 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	__u8 data;
-	int colour;
+	__u8 blue, red;
+
+	if (sd->colors >= 32) {
+		red = 32 + (sd->colors - 32) / 2;
+		blue = 64 - sd->colors;
+	} else {
+		red = sd->colors;
+		blue = 32 + (32 - sd->colors) / 2;
+	}
+	reg_w1(gspca_dev, 0x05, red);
+/*	reg_w1(gspca_dev, 0x07, 32); */
+	reg_w1(gspca_dev, 0x06, blue);
+}
 
-	colour = sd->colors - 128;
-	if (colour > 0)
-		data = (colour + 32) & 0x7f;	/* blue */
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+		return;
+	if (sd->autogain)
+		sd->ag_cnt = AG_CNT_START;
 	else
-		data = (-colour + 32) & 0x7f;	/* red */
-	reg_w1(gspca_dev, 0x05, data);
+		sd->ag_cnt = -1;
 }
 
 /* -- start the camera -- */
@@ -986,25 +1176,18 @@ static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i;
-	__u8 data;
-	__u8 reg1;
-	__u8 reg17;
+	__u8 reg1, reg17, reg18;
 	const __u8 *sn9c1xx;
 	int mode;
 	static const __u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
 	static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
-	static const __u8 CA_sn9c120[] =
-				 { 0x14, 0xec, 0x0a, 0xf6 };	/* SN9C120 */
 	static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd };	/* MI0360 */
-	static const __u8 CE_sn9c325[] =
-			{ 0x32, 0xdd, 0x32, 0xdd };	/* OV7648 - SN9C325 */
+	static const __u8 CE_ov76xx[] =
+			{ 0x32, 0xdd, 0x32, 0xdd };	/* OV7630/48 */
 
 	sn9c1xx = sn_tb[(int) sd->sensor];
 	configure_gpio(gspca_dev, sn9c1xx);
 
-/*fixme:jfm this sequence should appear at end of sd_start */
-/* with
-	reg_w1(gspca_dev, 0x01, 0x44); */
 	reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]);
 	reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]);
 	reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]);
@@ -1016,56 +1199,32 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, 0xc7, 0x00);
 	reg_w1(gspca_dev, 0xc8, 0x50);
 	reg_w1(gspca_dev, 0xc9, 0x3c);
-/*fixme:jfm end of ending sequence */
 	reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
-	switch (sd->bridge) {
-	case BRIDGE_SN9C325:
-		data = 0xae;
+	switch (sd->sensor) {
+	case SENSOR_OV7630:
+		reg17 = 0xe2;
 		break;
-	case BRIDGE_SN9C120:
-		data = 0xa0;
+	case SENSOR_OV7648:
+		reg17 = 0xae;
+		break;
+/*jfm: from win trace */
+	case SENSOR_OV7660:
+		reg17 = 0xa0;
 		break;
 	default:
-		data = 0x60;
+		reg17 = 0x60;
 		break;
 	}
-	reg_w1(gspca_dev, 0x17, data);
+	reg_w1(gspca_dev, 0x17, reg17);
 	reg_w1(gspca_dev, 0x05, sn9c1xx[5]);
 	reg_w1(gspca_dev, 0x07, sn9c1xx[7]);
 	reg_w1(gspca_dev, 0x06, sn9c1xx[6]);
 	reg_w1(gspca_dev, 0x14, sn9c1xx[0x14]);
-	switch (sd->bridge) {
-	case BRIDGE_SN9C325:
-		reg_w(gspca_dev, 0x20, regsn20_sn9c325,
-				sizeof regsn20_sn9c325);
-		for (i = 0; i < 8; i++)
-			reg_w(gspca_dev, 0x84, reg84_sn9c325,
-					sizeof reg84_sn9c325);
-		reg_w1(gspca_dev, 0x9a, 0x0a);
-		reg_w1(gspca_dev, 0x99, 0x60);
-		break;
-	case BRIDGE_SN9C120:
-		reg_w(gspca_dev, 0x20, regsn20_sn9c120,
-				sizeof regsn20_sn9c120);
-		for (i = 0; i < 2; i++)
-			reg_w(gspca_dev, 0x84, reg84_sn9c120_1,
-					sizeof reg84_sn9c120_1);
-		for (i = 0; i < 6; i++)
-			reg_w(gspca_dev, 0x84, reg84_sn9c120_2,
-					sizeof reg84_sn9c120_2);
-		reg_w(gspca_dev, 0x84, reg84_sn9c120_3,
-				sizeof reg84_sn9c120_3);
-		reg_w1(gspca_dev, 0x9a, 0x05);
-		reg_w1(gspca_dev, 0x99, 0x5b);
-		break;
-	default:
-		reg_w(gspca_dev, 0x20, regsn20, sizeof regsn20);
-		for (i = 0; i < 8; i++)
-			reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
+	reg_w(gspca_dev, 0x20, gamma_def, sizeof gamma_def);
+	for (i = 0; i < 8; i++)
+		reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
 		reg_w1(gspca_dev, 0x9a, 0x08);
 		reg_w1(gspca_dev, 0x99, 0x59);
-		break;
-	}
 
 	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
 	if (mode)
@@ -1090,6 +1249,15 @@ static void sd_start(struct gspca_dev *gspca_dev)
 /*			reg1 = 0x06;	 * 640 clk 24Mz (done) */
 		}
 		break;
+	case SENSOR_OM6802:
+		om6802_InitSensor(gspca_dev);
+		reg17 = 0x64;		/* 640 MCKSIZE */
+		break;
+	case SENSOR_OV7630:
+		ov7630_InitSensor(gspca_dev);
+		reg17 = 0xe2;
+		reg1 = 0x44;
+		break;
 	case SENSOR_OV7648:
 		ov7648_InitSensor(gspca_dev);
 		reg17 = 0xa2;
@@ -1107,24 +1275,17 @@ static void sd_start(struct gspca_dev *gspca_dev)
 /*			reg1 = 0x44; */
 /*			reg1 = 0x46;	(done) */
 		} else {
-			reg17 = 0xa2;	/* 640 */
-			reg1 = 0x40;
+			reg17 = 0x22;	/* 640 MCKSIZE */
+			reg1 = 0x06;
 		}
 		break;
 	}
 	reg_w(gspca_dev, 0xc0, C0, 6);
-	switch (sd->bridge) {
-	case BRIDGE_SN9C120:			/*jfm ?? */
-		reg_w(gspca_dev, 0xca, CA_sn9c120, 4);
-		break;
-	default:
-		reg_w(gspca_dev, 0xca, CA, 4);
-		break;
-	}
-	switch (sd->bridge) {
-	case BRIDGE_SN9C120:			/*jfm ?? */
-	case BRIDGE_SN9C325:
-		reg_w(gspca_dev, 0xce, CE_sn9c325, 4);
+	reg_w(gspca_dev, 0xca, CA, 4);
+	switch (sd->sensor) {
+	case SENSOR_OV7630:
+	case SENSOR_OV7648:
+		reg_w(gspca_dev, 0xce, CE_ov76xx, 4);
 		break;
 	default:
 		reg_w(gspca_dev, 0xce, CE, 4);
@@ -1133,19 +1294,29 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	}
 
 	/* here change size mode 0 -> VGA; 1 -> CIF */
-	data = 0x40 | sn9c1xx[0x18] | (mode << 4);
-	reg_w1(gspca_dev, 0x18, data);
+	reg18 = sn9c1xx[0x18] | (mode << 4);
+	reg_w1(gspca_dev, 0x18, reg18 | 0x40);
 
 	reg_w(gspca_dev, 0x100, qtable4, 0x40);
 	reg_w(gspca_dev, 0x140, qtable4 + 0x40, 0x40);
 
-	data = sn9c1xx[0x18] | (mode << 4);
-	reg_w1(gspca_dev, 0x18, data);
+	reg_w1(gspca_dev, 0x18, reg18);
 
 	reg_w1(gspca_dev, 0x17, reg17);
+	switch (sd->sensor) {
+	case SENSOR_HV7131R:
+	case SENSOR_MI0360:
+	case SENSOR_MO4000:
+	case SENSOR_OM6802:
+		setbrightness(gspca_dev);
+		setcontrast(gspca_dev);
+		break;
+	default:			/* OV76xx */
+		setbrightcont(gspca_dev);
+		break;
+	}
+	setautogain(gspca_dev);
 	reg_w1(gspca_dev, 0x01, reg1);
-	setbrightness(gspca_dev);
-	setcontrast(gspca_dev);
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
@@ -1168,12 +1339,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		i2c_w8(gspca_dev, stopmi0360);
 		data = 0x29;
 		break;
-	case SENSOR_MO4000:
-		break;
+	case SENSOR_OV7630:
 	case SENSOR_OV7648:
 		data = 0x29;
 		break;
 	default:
+/*	case SENSOR_MO4000: */
 /*	case SENSOR_OV7660: */
 		break;
 	}
@@ -1182,27 +1353,26 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
 	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
 	reg_w1(gspca_dev, 0x01, data);
-	reg_w1(gspca_dev, 0xf1, 0x01);
-}
-
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
+	reg_w1(gspca_dev, 0xf1, 0x00);
 }
 
-static void setautogain(struct gspca_dev *gspca_dev)
+static void do_autogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	/* Thanks S., without your advice, autobright should not work :) */
 	int delta;
-	int expotimes = 0;
+	int expotimes;
 	__u8 luma_mean = 130;
 	__u8 luma_delta = 20;
 
-	delta = sd->avg_lum;
+	/* Thanks S., without your advice, autobright should not work :) */
+	if (sd->ag_cnt < 0)
+		return;
+	if (--sd->ag_cnt >= 0)
+		return;
+	sd->ag_cnt = AG_CNT_START;
+
+	delta = atomic_read(&sd->avg_lum);
+	PDEBUG(D_FRAM, "mean lum %d", delta);
 	if (delta < luma_mean - luma_delta ||
 	    delta > luma_mean + luma_delta) {
 		switch (sd->sensor) {
@@ -1214,8 +1384,10 @@ static void setautogain(struct gspca_dev *gspca_dev)
 			sd->exposure = setexposure(gspca_dev,
 					(unsigned int) (expotimes << 8));
 			break;
-		case SENSOR_MO4000:
-		case SENSOR_MI0360:
+		default:
+/*		case SENSOR_MO4000: */
+/*		case SENSOR_MI0360: */
+/*		case SENSOR_OM6802: */
 			expotimes = sd->exposure;
 			expotimes += (luma_mean - delta) >> 6;
 			if (expotimes < 0)
@@ -1228,6 +1400,8 @@ static void setautogain(struct gspca_dev *gspca_dev)
 	}
 }
 
+/* scan the URB packets */
+/* This function is run at interrupt level. */
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1244,9 +1418,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 				frame, data, sof + 2);
 		if (sd->ag_cnt < 0)
 			return;
-		if (--sd->ag_cnt >= 0)
-			return;
-		sd->ag_cnt = AG_CNT_START;
 /* w1 w2 w3 */
 /* w4 w5 w6 */
 /* w7 w8 */
@@ -1261,9 +1432,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 /* w5 */
 		avg_lum += ((data[sof + 31] << 8) | data[sof + 32]) >> 4;
 		avg_lum >>= 4;
-		sd->avg_lum = avg_lum;
-		PDEBUG(D_PACK, "mean lum %d", avg_lum);
-		setautogain(gspca_dev);
+		atomic_set(&sd->avg_lum, avg_lum);
 		return;
 	}
 	if (gspca_dev->last_packet_type == LAST_PACKET) {
@@ -1274,70 +1443,24 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
 }
 
-static unsigned int getexposure(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	__u8 hexpo, mexpo, lexpo;
-
-	switch (sd->sensor) {
-	case SENSOR_HV7131R:
-		/* read sensor exposure */
-		i2c_r5(gspca_dev, 0x25);
-		return (gspca_dev->usb_buf[0] << 16)
-			| (gspca_dev->usb_buf[1] << 8)
-			| gspca_dev->usb_buf[2];
-	case SENSOR_MI0360:
-		/* read sensor exposure */
-		i2c_r5(gspca_dev, 0x09);
-		return (gspca_dev->usb_buf[0] << 8)
-			| gspca_dev->usb_buf[1];
-	case SENSOR_MO4000:
-		i2c_r5(gspca_dev, 0x0e);
-		hexpo = 0;		/* gspca_dev->usb_buf[1] & 0x07; */
-		mexpo = 0x40;		/* gspca_dev->usb_buf[2] & 0xff; */
-		lexpo = (gspca_dev->usb_buf[1] & 0x30) >> 4;
-		PDEBUG(D_CONF, "exposure %d",
-			(hexpo << 10) | (mexpo << 2) | lexpo);
-		return (hexpo << 10) | (mexpo << 2) | lexpo;
-	default:
-/*	case SENSOR_OV7660: */
-		/* read sensor exposure */
-		i2c_r5(gspca_dev, 0x04);
-		hexpo = gspca_dev->usb_buf[3] & 0x2f;
-		lexpo = gspca_dev->usb_buf[0] & 0x02;
-		i2c_r5(gspca_dev, 0x08);
-		mexpo = gspca_dev->usb_buf[2];
-		return (hexpo << 10) | (mexpo << 2) | lexpo;
-	}
-}
-
-static void getbrightness(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	/* hardcoded registers seem not readable */
-	switch (sd->sensor) {
-	case SENSOR_HV7131R:
-/*		sd->brightness = 0x7fff; */
-		sd->brightness = getexposure(gspca_dev) >> 4;
-		break;
-	case SENSOR_MI0360:
-		sd->brightness = getexposure(gspca_dev) << 4;
-		break;
-	case SENSOR_MO4000:
-/*		sd->brightness = 0x1fff; */
-		sd->brightness = getexposure(gspca_dev) << 4;
-		break;
-	}
-}
-
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->brightness = val;
-	if (gspca_dev->streaming)
-		setbrightness(gspca_dev);
+	if (gspca_dev->streaming) {
+		switch (sd->sensor) {
+		case SENSOR_HV7131R:
+		case SENSOR_MI0360:
+		case SENSOR_MO4000:
+		case SENSOR_OM6802:
+			setbrightness(gspca_dev);
+			break;
+		default:			/* OV76xx */
+			setbrightcont(gspca_dev);
+			break;
+		}
+	}
 	return 0;
 }
 
@@ -1345,7 +1468,6 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	getbrightness(gspca_dev);
 	*val = sd->brightness;
 	return 0;
 }
@@ -1355,8 +1477,19 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->contrast = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
+	if (gspca_dev->streaming) {
+		switch (sd->sensor) {
+		case SENSOR_HV7131R:
+		case SENSOR_MI0360:
+		case SENSOR_MO4000:
+		case SENSOR_OM6802:
+			setcontrast(gspca_dev);
+			break;
+		default:			/* OV76xx */
+			setbrightcont(gspca_dev);
+			break;
+		}
+	}
 	return 0;
 }
 
@@ -1391,10 +1524,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->autogain = val;
-	if (val)
-		sd->ag_cnt = AG_CNT_START;
-	else
-		sd->ag_cnt = -1;
+	if (gspca_dev->streaming)
+		setautogain(gspca_dev);
 	return 0;
 }
 
@@ -1412,12 +1543,11 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
+	.dq_callback = do_autogain,
 };
 
 /* -- module initialisation -- */
@@ -1426,7 +1556,7 @@ static const struct sd_desc sd_desc = {
 			| (SENSOR_ ## sensor << 8) \
 			| (i2c_addr)
 static const __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_SN9C102
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)},
 	{USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)},
 	{USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)},
@@ -1453,15 +1583,17 @@ static const __devinitdata struct usb_device_id device_table[] = {
 /*	{USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */
 /*	{USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */
 /*	{USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */
-	{USB_DEVICE(0x0c45, 0x612a), BSI(SN9C325, OV7648, 0x21)},
-/* bw600.inf:
-	{USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, */
+	{USB_DEVICE(0x0c45, 0x6128), BSI(SN9C110, OM6802, 0x21)}, /*sn9c325?*/
+/*bw600.inf:*/
+	{USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, /*sn9c325?*/
 	{USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)},
-/*	{USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x21)},
 /*	{USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */
-#ifndef CONFIG_USB_SN9C102
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)},
+#endif
 	{USB_DEVICE(0x0c45, 0x6138), BSI(SN9C120, MO4000, 0x21)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 /*	{USB_DEVICE(0x0c45, 0x613a), BSI(SN9C120, OV7648, 0x??)}, */
 	{USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)},
 	{USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)},
@@ -1485,6 +1617,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 17fe2c2a440..6e733901fcc 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -645,8 +645,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
@@ -880,14 +880,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		gspca_dev->usb_buf[0]);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1051,11 +1043,9 @@ static struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
@@ -1093,6 +1083,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index 51a3c3429ef..e9eb59bae4f 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -1953,8 +1953,8 @@ error:
 	return -EINVAL;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
@@ -2023,11 +2023,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
 	reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00);
 }
 
@@ -2120,11 +2115,10 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
@@ -2154,6 +2148,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index 3c2be80cbd6..f601daf19eb 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -61,27 +61,27 @@ static struct ctrl sd_ctrls[] = {
 
 static struct v4l2_pix_format vga_mode[] = {
 	{160, 120, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
-		.bytesperline = 160 * 3,
+		.bytesperline = 160,
 		.sizeimage = 160 * 120 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 5},
 	{176, 144, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
-		.bytesperline = 176 * 3,
+		.bytesperline = 176,
 		.sizeimage = 176 * 144 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 4},
 	{320, 240, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
-		.bytesperline = 320 * 3,
+		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2},
 	{352, 288, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
-		.bytesperline = 352 * 3,
+		.bytesperline = 352,
 		.sizeimage = 352 * 288 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
-		.bytesperline = 640 * 3,
+		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
@@ -655,8 +655,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int ret;
@@ -743,11 +743,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
 	/* This maybe reset or power control */
 	reg_write(gspca_dev->dev, 0x03, 0x03, 0x20);
 	reg_write(gspca_dev->dev, 0x03, 0x01, 0x0);
@@ -776,7 +771,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	default:
 		data += 1;
 		len -= 1;
-		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame,
 				data, len);
 		break;
 	}
@@ -825,11 +820,10 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
@@ -855,6 +849,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c
index 6fe715c80ad..195dce96ef0 100644
--- a/drivers/media/video/gspca/spca506.c
+++ b/drivers/media/video/gspca/spca506.c
@@ -112,27 +112,27 @@ static struct ctrl sd_ctrls[] = {
 
 static struct v4l2_pix_format vga_mode[] = {
 	{160, 120, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
-		.bytesperline = 160 * 3,
+		.bytesperline = 160,
 		.sizeimage = 160 * 120 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 5},
 	{176, 144, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
-		.bytesperline = 176 * 3,
+		.bytesperline = 176,
 		.sizeimage = 176 * 144 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 4},
 	{320, 240, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
-		.bytesperline = 320 * 3,
+		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2},
 	{352, 288, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
-		.bytesperline = 352 * 3,
+		.bytesperline = 352,
 		.sizeimage = 352 * 288 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
-		.bytesperline = 640 * 3,
+		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
@@ -313,8 +313,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct usb_device *dev = gspca_dev->dev;
 
@@ -560,14 +560,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w(dev, 0x03, 0x00, 0x0003);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -588,7 +580,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	default:
 		data += 1;
 		len -= 1;
-		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame,
 				data, len);
 		break;
 	}
@@ -740,11 +732,9 @@ static struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
@@ -772,6 +762,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index b608a27ad11..281ce02103a 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -63,23 +63,23 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format sif_mode[] = {
-	{160, 120, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 160 * 3,
+	{160, 120, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE,
+		.bytesperline = 160,
 		.sizeimage = 160 * 120 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 3},
-	{176, 144, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 176 * 3,
+	{176, 144, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE,
+		.bytesperline = 176,
 		.sizeimage = 176 * 144 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2},
-	{320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 320 * 3,
+	{320, 240, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE,
+		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
-	{352, 288, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-		.bytesperline = 352 * 3,
+	{352, 288, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE,
+		.bytesperline = 352,
 		.sizeimage = 352 * 288 * 3 / 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
@@ -1521,8 +1521,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;			/* success */
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 /*	write_vector(gspca_dev, spca508_open_data); */
 	return 0;
@@ -1554,15 +1554,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_write(gspca_dev->dev, 0x8112, 0x20);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1583,7 +1574,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	default:
 		data += 1;
 		len -= 1;
-		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame,
 				data, len);
 		break;
 	}
@@ -1633,11 +1624,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
@@ -1667,6 +1656,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index a26174508cb..cfbc9ebc5c5 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -32,69 +32,48 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 
-	unsigned short contrast;
-	__u8 brightness;
+	__u16 contrast;			/* rev72a only */
+#define CONTRAST_MIN 0x0000
+#define CONTRAST_DEF 0x2000
+#define CONTRAST_MAX 0x3fff
+
+	__u16 exposure;			/* rev12a only */
+#define EXPOSURE_MIN 1
+#define EXPOSURE_DEF 200
+#define EXPOSURE_MAX (4095 - 900) /* see set_exposure */
+
+	__u8 brightness;		/* rev72a only */
+#define BRIGHTNESS_MIN 0
+#define BRIGHTNESS_DEF 32
+#define BRIGHTNESS_MAX 63
+
+	__u8 white;			/* rev12a only */
+#define WHITE_MIN 1
+#define WHITE_DEF 0x40
+#define WHITE_MAX 0x7f
+
 	__u8 autogain;
+#define AUTOGAIN_MIN 0
+#define AUTOGAIN_DEF 1
+#define AUTOGAIN_MAX 1
+
+	__u8 gain;			/* rev12a only */
+#define GAIN_MIN 0x0
+#define GAIN_DEF 0x24
+#define GAIN_MAX 0x24
+
+#define EXPO12A_DEF 3
+	__u8 expo12a;		/* expo/gain? for rev 12a */
 
 	__u8 chip_revision;
+#define Rev012A 0
+#define Rev072A 1
+
 	signed char ag_cnt;
 #define AG_CNT_START 13
 };
 
-/* V4L2 controls supported by the driver */
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
-
-static struct ctrl sd_ctrls[] = {
-#define SD_BRIGHTNESS 0
-	{
-	 {
-	  .id = V4L2_CID_BRIGHTNESS,
-	  .type = V4L2_CTRL_TYPE_INTEGER,
-	  .name = "Brightness",
-	  .minimum = 0,
-	  .maximum = 63,
-	  .step = 1,
-	  .default_value = 32,
-	  },
-	 .set = sd_setbrightness,
-	 .get = sd_getbrightness,
-	 },
-#define SD_CONTRAST 1
-	{
-	 {
-	  .id = V4L2_CID_CONTRAST,
-	  .type = V4L2_CTRL_TYPE_INTEGER,
-	  .name = "Contrast",
-	  .minimum = 0,
-	  .maximum = 0x3fff,
-	  .step = 1,
-	  .default_value = 0x2000,
-	  },
-	 .set = sd_setcontrast,
-	 .get = sd_getcontrast,
-	 },
-#define SD_AUTOGAIN 2
-	{
-	 {
-	  .id = V4L2_CID_AUTOGAIN,
-	  .type = V4L2_CTRL_TYPE_BOOLEAN,
-	  .name = "Auto Gain",
-	  .minimum = 0,
-	  .maximum = 1,
-	  .step = 1,
-	  .default_value = 1,
-	  },
-	 .set = sd_setautogain,
-	 .get = sd_getautogain,
-	 },
-};
-
-static struct v4l2_pix_format sif_mode[] = {
+static struct v4l2_pix_format sif_012a_mode[] = {
 	{160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 160 * 120,
@@ -117,6 +96,29 @@ static struct v4l2_pix_format sif_mode[] = {
 		.priv = 0},
 };
 
+static struct v4l2_pix_format sif_072a_mode[] = {
+	{160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 3},
+	{176, 144, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 176 * 144,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2},
+	{320, 240, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
+	{352, 288, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 352,
+		.sizeimage = 352 * 288,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0},
+};
+
 /*
  * Initialization data
  * I'm not very sure how to split initialization from open data
@@ -143,12 +145,8 @@ static struct v4l2_pix_format sif_mode[] = {
 #define SPCA561_INDEX_I2C_BASE 0x8800
 #define SPCA561_SNAPBIT 0x20
 #define SPCA561_SNAPCTRL 0x40
-enum {
-	Rev072A = 0,
-	Rev012A,
-};
 
-static void reg_w_val(struct usb_device *dev, __u16 index, __u16 value)
+static void reg_w_val(struct usb_device *dev, __u16 index, __u8 value)
 {
 	int ret;
 
@@ -198,12 +196,6 @@ static void reg_w_buf(struct gspca_dev *gspca_dev,
 			index, gspca_dev->usb_buf, len, 500);
 }
 
-static void i2c_init(struct gspca_dev *gspca_dev, __u8 mode)
-{
-	reg_w_val(gspca_dev->dev, 0x92, 0x8804);
-	reg_w_val(gspca_dev->dev, mode, 0x8802);
-}
-
 static void i2c_write(struct gspca_dev *gspca_dev, __u16 valeur, __u16 reg)
 {
 	int retry = 60;
@@ -212,9 +204,9 @@ static void i2c_write(struct gspca_dev *gspca_dev, __u16 valeur, __u16 reg)
 
 	DataLow = valeur;
 	DataHight = valeur >> 8;
-	reg_w_val(gspca_dev->dev, reg, 0x8801);
-	reg_w_val(gspca_dev->dev, DataLow, 0x8805);
-	reg_w_val(gspca_dev->dev, DataHight, 0x8800);
+	reg_w_val(gspca_dev->dev, 0x8801, reg);
+	reg_w_val(gspca_dev->dev, 0x8805, DataLow);
+	reg_w_val(gspca_dev->dev, 0x8800, DataHight);
 	while (retry--) {
 		reg_r(gspca_dev, 0x8803, 1);
 		if (!gspca_dev->usb_buf[0])
@@ -228,14 +220,14 @@ static int i2c_read(struct gspca_dev *gspca_dev, __u16 reg, __u8 mode)
 	__u8 value;
 	__u8 vallsb;
 
-	reg_w_val(gspca_dev->dev, 0x92, 0x8804);
-	reg_w_val(gspca_dev->dev, reg, 0x8801);
-	reg_w_val(gspca_dev->dev, (mode | 0x01), 0x8802);
-	while (retry--) {
+	reg_w_val(gspca_dev->dev, 0x8804, 0x92);
+	reg_w_val(gspca_dev->dev, 0x8801, reg);
+	reg_w_val(gspca_dev->dev, 0x8802, (mode | 0x01));
+	do {
 		reg_r(gspca_dev, 0x8803, 1);
 		if (!gspca_dev->usb_buf)
 			break;
-	}
+	} while (--retry);
 	if (retry == 0)
 		return -1;
 	reg_r(gspca_dev, 0x8800, 1);
@@ -438,21 +430,10 @@ static const __u16 spca561_init_data[][2] = {
 	{0x0035, 0x8801},	/* 0x14 - set gain general */
 	{0x001f, 0x8805},	/* 0x14 */
 	{0x0000, 0x8800},
-	{0x0030, 0x8112},
+	{0x000e, 0x8112},	/* white balance - was 30 */
 	{}
 };
 
-static void sensor_reset(struct gspca_dev *gspca_dev)
-{
-	reg_w_val(gspca_dev->dev, 0x8631, 0xc8);
-	reg_w_val(gspca_dev->dev, 0x8634, 0xc8);
-	reg_w_val(gspca_dev->dev, 0x8112, 0x00);
-	reg_w_val(gspca_dev->dev, 0x8114, 0x00);
-	reg_w_val(gspca_dev->dev, 0x8118, 0x21);
-	i2c_init(gspca_dev, 0x14);
-	i2c_write(gspca_dev, 1, 0x0d);
-	i2c_write(gspca_dev, 0, 0x0d);
-}
 
 /******************** QC Express etch2 stuff ********************/
 static const __u16 Pb100_1map8300[][2] = {
@@ -462,9 +443,9 @@ static const __u16 Pb100_1map8300[][2] = {
 	{0x8303, 0x0125},	/* image area */
 	{0x8304, 0x0169},
 	{0x8328, 0x000b},
-	{0x833c, 0x0001},
+	{0x833c, 0x0001},		/*fixme: win:07*/
 
-	{0x832f, 0x0419},
+	{0x832f, 0x1904},		/*fixme: was 0419*/
 	{0x8307, 0x00aa},
 	{0x8301, 0x0003},
 	{0x8302, 0x000e},
@@ -478,9 +459,10 @@ static const __u16 Pb100_2map8300[][2] = {
 };
 
 static const __u16 spca561_161rev12A_data1[][2] = {
-	{0x21, 0x8118},
-	{0x01, 0x8114},
-	{0x00, 0x8112},
+	{0x29, 0x8118},		/* white balance - was 21 */
+	{0x08, 0x8114},		/* white balance - was 01 */
+	{0x0e, 0x8112},		/* white balance - was 00 */
+	{0x00, 0x8102},		/* white balance - new */
 	{0x92, 0x8804},
 	{0x04, 0x8802},		/* windows uses 08 */
 	{}
@@ -505,14 +487,16 @@ static const __u16 spca561_161rev12A_data2[][2] = {
 	{0xb0, 0x8603},
 
 	/* sensor gains */
+	{0x07, 0x8601},		/* white balance - new */
+	{0x07, 0x8602},		/* white balance - new */
 	{0x00, 0x8610},		/* *red */
 	{0x00, 0x8611},		/* 3f   *green */
 	{0x00, 0x8612},		/* green *blue */
 	{0x00, 0x8613},		/* blue *green */
-	{0x35, 0x8614},		/* green *red */
-	{0x35, 0x8615},		/* 40   *green */
-	{0x35, 0x8616},		/* 7a   *blue */
-	{0x35, 0x8617},		/* 40   *green */
+	{0x43, 0x8614},		/* green *red - white balance - was 0x35 */
+	{0x40, 0x8615},		/* 40   *green - white balance - was 0x35 */
+	{0x71, 0x8616},		/* 7a   *blue - white balance - was 0x35 */
+	{0x40, 0x8617},		/* 40   *green - white balance - was 0x35 */
 
 	{0x0c, 0x8620},		/* 0c */
 	{0xc8, 0x8631},		/* c8 */
@@ -527,6 +511,7 @@ static const __u16 spca561_161rev12A_data2[][2] = {
 	{0xdf, 0x863c},		/* df */
 	{0xf0, 0x8505},
 	{0x32, 0x850a},
+/*	{0x99, 0x8700},		 * - white balance - new (removed) */
 	{}
 };
 
@@ -545,9 +530,10 @@ static void sensor_mapwrite(struct gspca_dev *gspca_dev,
 }
 static void init_161rev12A(struct gspca_dev *gspca_dev)
 {
-	sensor_reset(gspca_dev);
+/*	sensor_reset(gspca_dev);	(not in win) */
 	write_vector(gspca_dev, spca561_161rev12A_data1);
 	sensor_mapwrite(gspca_dev, Pb100_1map8300);
+/*fixme: should be in sd_start*/
 	write_vector(gspca_dev, spca561_161rev12A_data2);
 	sensor_mapwrite(gspca_dev, Pb100_2map8300);
 }
@@ -581,35 +567,38 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	}
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	gspca_dev->nbalt = 7 + 1;	/* choose alternate 7 first */
-	cam->cam_mode = sif_mode;
-	cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
 
 	sd->chip_revision = id->driver_info;
-	sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value;
-	sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value;
-	sd->autogain = sd_ctrls[SD_AUTOGAIN].qctrl.default_value;
+	if (sd->chip_revision == Rev012A) {
+		cam->cam_mode = sif_012a_mode;
+		cam->nmodes = ARRAY_SIZE(sif_012a_mode);
+	} else {
+		cam->cam_mode = sif_072a_mode;
+		cam->nmodes = ARRAY_SIZE(sif_072a_mode);
+	}
+	sd->brightness = BRIGHTNESS_DEF;
+	sd->contrast = CONTRAST_DEF;
+	sd->white = WHITE_DEF;
+	sd->exposure = EXPOSURE_DEF;
+	sd->autogain = AUTOGAIN_DEF;
+	sd->gain = GAIN_DEF;
+	sd->expo12a = EXPO12A_DEF;
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init_12a(struct gspca_dev *gspca_dev)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	switch (sd->chip_revision) {
-	case Rev072A:
-		PDEBUG(D_STREAM, "Chip revision id: 072a");
-		write_vector(gspca_dev, spca561_init_data);
-		break;
-	default:
-/*	case Rev012A: */
-		PDEBUG(D_STREAM, "Chip revision id: 012a");
-		init_161rev12A(gspca_dev);
-		break;
-	}
+	PDEBUG(D_STREAM, "Chip revision: 012a");
+	init_161rev12A(gspca_dev);
+	return 0;
+}
+static int sd_init_72a(struct gspca_dev *gspca_dev)
+{
+	PDEBUG(D_STREAM, "Chip revision: 072a");
+	write_vector(gspca_dev, spca561_init_data);
 	return 0;
 }
 
@@ -618,25 +607,20 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct usb_device *dev = gspca_dev->dev;
 	__u8 lowb;
-	int expotimes;
 
 	switch (sd->chip_revision) {
 	case Rev072A:
 		lowb = sd->contrast >> 8;
-		reg_w_val(dev, lowb, 0x8651);
-		reg_w_val(dev, lowb, 0x8652);
-		reg_w_val(dev, lowb, 0x8653);
-		reg_w_val(dev, lowb, 0x8654);
+		reg_w_val(dev, 0x8651, lowb);
+		reg_w_val(dev, 0x8652, lowb);
+		reg_w_val(dev, 0x8653, lowb);
+		reg_w_val(dev, 0x8654, lowb);
 		break;
-	case Rev012A: {
-		__u8 Reg8391[] =
-			{ 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00 };
-
-		/* Write camera sensor settings */
-		expotimes = (sd->contrast >> 5) & 0x07ff;
-		Reg8391[0] = expotimes & 0xff;	/* exposure */
-		Reg8391[1] = 0x18 | (expotimes >> 8);
-		Reg8391[2] = sd->brightness;	/* gain */
+	default: {
+/*	case Rev012A: { */
+		static const __u8 Reg8391[] =
+			{ 0x92, 0x30, 0x20, 0x00, 0x0c, 0x00, 0x00, 0x00 };
+
 		reg_w_buf(gspca_dev, 0x8391, Reg8391, 8);
 		reg_w_buf(gspca_dev, 0x8390, Reg8391, 8);
 		break;
@@ -644,93 +628,171 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	}
 }
 
-static void sd_start(struct gspca_dev *gspca_dev)
+/* rev12a only */
+static void setwhite(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	__u16 white;
+	__u8 reg8614, reg8616;
+
+	white = sd->white;
+	/* try to emulate MS-win as possible */
+	reg8616 = 0x90 - white * 5 / 8;
+	reg_w_val(gspca_dev->dev, 0x8616, reg8616);
+	reg8614 = 0x20 + white * 3 / 8;
+	reg_w_val(gspca_dev->dev, 0x8614, reg8614);
+}
+
+/* rev 12a only */
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int expo;
+	int clock_divider;
+	__u8 data[2];
+
+	/* Register 0x8309 controls exposure for the spca561,
+	   the basic exposure setting goes from 1-2047, where 1 is completely
+	   dark and 2047 is very bright. It not only influences exposure but
+	   also the framerate (to allow for longer exposure) from 1 - 300 it
+	   only raises the exposure time then from 300 - 600 it halves the
+	   framerate to be able to further raise the exposure time and for every
+	   300 more it halves the framerate again. This allows for a maximum
+	   exposure time of circa 0.2 - 0.25 seconds (30 / (2000/3000) fps).
+	   Sometimes this is not enough, the 1-2047 uses bits 0-10, bits 11-12
+	   configure a divider for the base framerate which us used at the
+	   exposure setting of 1-300. These bits configure the base framerate
+	   according to the following formula: fps = 60 / (value + 2) */
+	if (sd->exposure < 2048) {
+		expo = sd->exposure;
+		clock_divider = 0;
+	} else {
+		/* Add 900 to make the 0 setting of the second part of the
+		   exposure equal to the 2047 setting of the first part. */
+		expo = (sd->exposure - 2048) + 900;
+		clock_divider = 3;
+	}
+	expo |= clock_divider << 11;
+	data[0] = expo;
+	data[1] = expo >> 8;
+	reg_w_buf(gspca_dev, 0x8309, data, 2);
+}
+
+/* rev 12a only */
+static void setgain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	__u8 data[2];
+
+	data[0] = sd->gain;
+	data[1] = 0;
+	reg_w_buf(gspca_dev, 0x8335, data, 2);
+}
+
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->autogain)
+		sd->ag_cnt = AG_CNT_START;
+	else
+		sd->ag_cnt = -1;
+}
+
+static void sd_start_12a(struct gspca_dev *gspca_dev)
+{
 	struct usb_device *dev = gspca_dev->dev;
-	int Clck;
+	int Clck = 0x8a; /* lower 0x8X values lead to fps > 30 */
 	__u8 Reg8307[] = { 0xaa, 0x00 };
 	int mode;
 
 	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
-	switch (sd->chip_revision) {
-	case Rev072A:
-		switch (mode) {
-		default:
-/*		case 0:
-		case 1: */
-			Clck = 0x25;
-			break;
-		case 2:
-			Clck = 0x22;
-			break;
-		case 3:
-			Clck = 0x21;
-			break;
-		}
-		reg_w_val(dev, 0x8500, mode);	/* mode */
-		reg_w_val(dev, 0x8700, Clck);	/* 0x27 clock */
-		reg_w_val(dev, 0x8112, 0x10 | 0x20);
-		break;
+	if (mode <= 1) {
+		/* Use compression on 320x240 and above */
+		reg_w_val(dev, 0x8500, 0x10 | mode);
+	} else {
+		/* I couldn't get the compression to work below 320x240
+		 * Fortunately at these resolutions the bandwidth
+		 * is sufficient to push raw frames at ~20fps */
+		reg_w_val(dev, 0x8500, mode);
+	}		/* -- qq@kuku.eu.org */
+	reg_w_buf(gspca_dev, 0x8307, Reg8307, 2);
+	reg_w_val(gspca_dev->dev, 0x8700, Clck);
+					/* 0x8f 0x85 0x27 clock */
+	reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20);
+	reg_w_val(gspca_dev->dev, 0x850b, 0x03);
+	setcontrast(gspca_dev);
+	setwhite(gspca_dev);
+	setautogain(gspca_dev);
+	setexposure(gspca_dev);
+}
+static void sd_start_72a(struct gspca_dev *gspca_dev)
+{
+	struct usb_device *dev = gspca_dev->dev;
+	int Clck;
+	int mode;
+
+	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	switch (mode) {
 	default:
-/*	case Rev012A: */
-		switch (mode) {
-		case 0:
-		case 1:
-			Clck = 0x8a;
-			break;
-		case 2:
-			Clck = 0x85;
-			break;
-		default:
-			Clck = 0x83;
-			break;
-		}
-		if (mode <= 1) {
-			/* Use compression on 320x240 and above */
-			reg_w_val(dev, 0x8500, 0x10 | mode);
-		} else {
-			/* I couldn't get the compression to work below 320x240
-			 * Fortunately at these resolutions the bandwidth
-			 * is sufficient to push raw frames at ~20fps */
-			reg_w_val(dev, 0x8500, mode);
-		}		/* -- qq@kuku.eu.org */
-		reg_w_buf(gspca_dev, 0x8307, Reg8307, 2);
-		reg_w_val(gspca_dev->dev, 0x8700, Clck);
-						/* 0x8f 0x85 0x27 clock */
-		reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20);
-		reg_w_val(gspca_dev->dev, 0x850b, 0x03);
-		setcontrast(gspca_dev);
+/*	case 0:
+	case 1: */
+		Clck = 0x25;
+		break;
+	case 2:
+		Clck = 0x22;
+		break;
+	case 3:
+		Clck = 0x21;
 		break;
 	}
+	reg_w_val(dev, 0x8500, mode);	/* mode */
+	reg_w_val(dev, 0x8700, Clck);	/* 0x27 clock */
+	reg_w_val(dev, 0x8112, 0x10 | 0x20);
+	setautogain(gspca_dev);
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
-	reg_w_val(gspca_dev->dev, 0x8112, 0x20);
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->chip_revision == Rev012A) {
+		reg_w_val(gspca_dev->dev, 0x8112, 0x0e);
+	} else {
+		reg_w_val(gspca_dev->dev, 0x8112, 0x20);
+/*		reg_w_val(gspca_dev->dev, 0x8102, 0x00); ?? */
+	}
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
-}
+	struct sd *sd = (struct sd *) gspca_dev;
 
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-	reg_w_val(gspca_dev->dev, 0x8114, 0);
+	if (sd->chip_revision == Rev012A) {
+		reg_w_val(gspca_dev->dev, 0x8118, 0x29);
+		reg_w_val(gspca_dev->dev, 0x8114, 0x08);
+	}
+/*	reg_w_val(gspca_dev->dev, 0x8114, 0); */
 }
 
-static void setautogain(struct gspca_dev *gspca_dev)
+static void do_autogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int expotimes = 0;
-	int pixelclk = 0;
-	int gainG = 0;
+	int expotimes;
+	int pixelclk;
+	int gainG;
 	__u8 R, Gr, Gb, B;
 	int y;
 	__u8 luma_mean = 110;
 	__u8 luma_delta = 20;
 	__u8 spring = 4;
+	__u8 reg8339[2];
+
+	if (sd->ag_cnt < 0)
+		return;
+	if (--sd->ag_cnt >= 0)
+		return;
+	sd->ag_cnt = AG_CNT_START;
 
 	switch (sd->chip_revision) {
 	case Rev072A:
@@ -779,13 +841,16 @@ static void setautogain(struct gspca_dev *gspca_dev)
 		}
 		break;
 	case Rev012A:
-		/* sensor registers is access and memory mapped to 0x8300 */
-		/* readind all 0x83xx block the sensor */
-		/*
-		 * The data from the header seem wrong where is the luma
-		 * and chroma mean value
-		 * at the moment set exposure in contrast set
-		 */
+		reg_r(gspca_dev, 0x8330, 2);
+		if (gspca_dev->usb_buf[1] > 0x08) {
+			reg8339[0] = ++sd->expo12a;
+			reg8339[1] = 0;
+			reg_w_buf(gspca_dev, 0x8339, reg8339, 2);
+		} else if (gspca_dev->usb_buf[1] < 0x02) {
+			reg8339[0] = --sd->expo12a;
+			reg8339[1] = 0;
+			reg_w_buf(gspca_dev, 0x8339, reg8339, 2);
+		}
 		break;
 	}
 }
@@ -801,12 +866,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	case 0:		/* start of frame */
 		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
 					data, 0);
-		if (sd->ag_cnt >= 0) {
-			if (--sd->ag_cnt < 0) {
-				sd->ag_cnt = AG_CNT_START;
-				setautogain(gspca_dev);
-			}
-		}
 		data += SPCA561_OFFSET_DATA;
 		len -= SPCA561_OFFSET_DATA;
 		if (data[1] & 0x10) {
@@ -815,8 +874,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 					frame, data, len);
 		} else {
 			/* raw bayer (with a header, which we skip) */
-			data += 20;
-			len -= 20;
+			if (sd->chip_revision == Rev012A) {
+				data += 20;
+				len -= 20;
+			} else {
+				data += 16;
+				len -= 16;
+			}
 			gspca_frame_add(gspca_dev, FIRST_PACKET,
 						frame, data, len);
 		}
@@ -830,24 +894,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
 }
 
+/* rev 72a only */
 static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	__u8 value;
 
-	switch (sd->chip_revision) {
-	case Rev072A:
-		value = sd->brightness;
-		reg_w_val(gspca_dev->dev, value, 0x8611);
-		reg_w_val(gspca_dev->dev, value, 0x8612);
-		reg_w_val(gspca_dev->dev, value, 0x8613);
-		reg_w_val(gspca_dev->dev, value, 0x8614);
-		break;
-	default:
-/*	case Rev012A: */
-		setcontrast(gspca_dev);
-		break;
-	}
+	value = sd->brightness;
+	reg_w_val(gspca_dev->dev, 0x8611, value);
+	reg_w_val(gspca_dev->dev, 0x8612, value);
+	reg_w_val(gspca_dev->dev, 0x8613, value);
+	reg_w_val(gspca_dev->dev, 0x8614, value);
 }
 
 static void getbrightness(struct gspca_dev *gspca_dev)
@@ -855,52 +912,38 @@ static void getbrightness(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	__u16 tot;
 
-	switch (sd->chip_revision) {
-	case Rev072A:
-		tot = 0;
-		reg_r(gspca_dev, 0x8611, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8612, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8613, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8614, 1);
-		tot += gspca_dev->usb_buf[0];
-		sd->brightness = tot >> 2;
-		break;
-	default:
-/*	case Rev012A: */
-		/* no way to read sensor settings */
-		break;
-	}
+	tot = 0;
+	reg_r(gspca_dev, 0x8611, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8612, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8613, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8614, 1);
+	tot += gspca_dev->usb_buf[0];
+	sd->brightness = tot >> 2;
 }
 
+/* rev72a only */
 static void getcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	__u16 tot;
 
-	switch (sd->chip_revision) {
-	case Rev072A:
-		tot = 0;
-		reg_r(gspca_dev, 0x8651, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8652, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8653, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8654, 1);
-		tot += gspca_dev->usb_buf[0];
-		sd->contrast = tot << 6;
-		break;
-	default:
-/*	case Rev012A: */
-		/* no way to read sensor settings */
-		break;
-	}
+	tot = 0;
+	reg_r(gspca_dev, 0x8651, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8652, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8653, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8654, 1);
+	tot += gspca_dev->usb_buf[0];
+	sd->contrast = tot << 6;
 	PDEBUG(D_CONF, "get contrast %d", sd->contrast);
 }
 
+/* rev 72a only */
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -920,6 +963,7 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+/* rev 72a only */
 static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -944,10 +988,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->autogain = val;
-	if (val)
-		sd->ag_cnt = AG_CNT_START;
-	else
-		sd->ag_cnt = -1;
+	if (gspca_dev->streaming)
+		setautogain(gspca_dev);
 	return 0;
 }
 
@@ -959,18 +1001,189 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+/* rev12a only */
+static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->white = val;
+	if (gspca_dev->streaming)
+		setwhite(gspca_dev);
+	return 0;
+}
+
+static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->white;
+	return 0;
+}
+
+/* rev12a only */
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->exposure = val;
+	if (gspca_dev->streaming)
+		setexposure(gspca_dev);
+	return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->exposure;
+	return 0;
+}
+
+/* rev12a only */
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gain = val;
+	if (gspca_dev->streaming)
+		setgain(gspca_dev);
+	return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->gain;
+	return 0;
+}
+
+/* control tables */
+static struct ctrl sd_ctrls_12a[] = {
+	{
+	    {
+		.id = V4L2_CID_DO_WHITE_BALANCE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "While Balance",
+		.minimum = WHITE_MIN,
+		.maximum = WHITE_MAX,
+		.step = 1,
+		.default_value = WHITE_DEF,
+	    },
+	    .set = sd_setwhite,
+	    .get = sd_getwhite,
+	},
+	{
+	    {
+		.id = V4L2_CID_EXPOSURE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Exposure",
+		.minimum = EXPOSURE_MIN,
+		.maximum = EXPOSURE_MAX,
+		.step = 1,
+		.default_value = EXPOSURE_DEF,
+	    },
+	    .set = sd_setexposure,
+	    .get = sd_getexposure,
+	},
+	{
+	    {
+		.id = V4L2_CID_AUTOGAIN,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Auto Gain",
+		.minimum = AUTOGAIN_MIN,
+		.maximum = AUTOGAIN_MAX,
+		.step = 1,
+		.default_value = AUTOGAIN_DEF,
+	    },
+	    .set = sd_setautogain,
+	    .get = sd_getautogain,
+	},
+	{
+	    {
+		.id = V4L2_CID_GAIN,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Gain",
+		.minimum = GAIN_MIN,
+		.maximum = GAIN_MAX,
+		.step = 1,
+		.default_value = GAIN_DEF,
+	    },
+	    .set = sd_setgain,
+	    .get = sd_getgain,
+	},
+};
+
+static struct ctrl sd_ctrls_72a[] = {
+	{
+	   {
+		.id = V4L2_CID_BRIGHTNESS,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Brightness",
+		.minimum = BRIGHTNESS_MIN,
+		.maximum = BRIGHTNESS_MAX,
+		.step = 1,
+		.default_value = BRIGHTNESS_DEF,
+	    },
+	    .set = sd_setbrightness,
+	    .get = sd_getbrightness,
+	},
+	{
+	    {
+		.id = V4L2_CID_CONTRAST,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Contrast",
+		.minimum = CONTRAST_MIN,
+		.maximum = CONTRAST_MAX,
+		.step = 1,
+		.default_value = CONTRAST_DEF,
+	    },
+	    .set = sd_setcontrast,
+	    .get = sd_getcontrast,
+	},
+	{
+	    {
+		.id = V4L2_CID_AUTOGAIN,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Auto Gain",
+		.minimum = AUTOGAIN_MIN,
+		.maximum = AUTOGAIN_MAX,
+		.step = 1,
+		.default_value = AUTOGAIN_DEF,
+	    },
+	    .set = sd_setautogain,
+	    .get = sd_getautogain,
+	},
+};
+
 /* sub-driver description */
-static const struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc_12a = {
+	.name = MODULE_NAME,
+	.ctrls = sd_ctrls_12a,
+	.nctrls = ARRAY_SIZE(sd_ctrls_12a),
+	.config = sd_config,
+	.init = sd_init_12a,
+	.start = sd_start_12a,
+	.stopN = sd_stopN,
+	.stop0 = sd_stop0,
+	.pkt_scan = sd_pkt_scan,
+/*	.dq_callback = do_autogain,	 * fixme */
+};
+static const struct sd_desc sd_desc_72a = {
 	.name = MODULE_NAME,
-	.ctrls = sd_ctrls,
-	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.ctrls = sd_ctrls_72a,
+	.nctrls = ARRAY_SIZE(sd_ctrls_72a),
 	.config = sd_config,
-	.open = sd_open,
-	.start = sd_start,
+	.init = sd_init_72a,
+	.start = sd_start_72a,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
+	.dq_callback = do_autogain,
+};
+static const struct sd_desc *sd_desc[2] = {
+	&sd_desc_12a,
+	&sd_desc_72a
 };
 
 /* -- module initialisation -- */
@@ -999,7 +1212,9 @@ MODULE_DEVICE_TABLE(usb, device_table);
 static int sd_probe(struct usb_interface *intf,
 		    const struct usb_device_id *id)
 {
-	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+	return gspca_dev_probe(intf, id,
+				sd_desc[id->driver_info],
+				sizeof(struct sd),
 			       THIS_MODULE);
 }
 
@@ -1008,6 +1223,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index 16219cf6a6d..2f2de429e27 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -306,8 +306,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	int ret;
 
@@ -398,14 +398,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	PDEBUG(D_STREAM, "camera stopped");
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -535,11 +527,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
 };
@@ -564,6 +554,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 54efa48bee0..1cfcc6c4955 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -449,31 +449,47 @@ static const __u8 qtable_spca504_default[2][64] = {
 	 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e}
 };
 
-static void reg_r(struct usb_device *dev,
-			   __u16 req,
-			   __u16 index,
-			   __u8 *buffer, __u16 length)
+/* read <len> bytes to gspca_dev->usb_buf */
+static void reg_r(struct gspca_dev *gspca_dev,
+		  __u16 req,
+		  __u16 index,
+		  __u16 len)
 {
-	usb_control_msg(dev,
-			usb_rcvctrlpipe(dev, 0),
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
+		err("reg_r: buffer overflow");
+		return;
+	}
+#endif
+	usb_control_msg(gspca_dev->dev,
+			usb_rcvctrlpipe(gspca_dev->dev, 0),
 			req,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0,		/* value */
-			index, buffer, length,
+			index,
+			len ? gspca_dev->usb_buf : NULL, len,
 			500);
 }
 
-static void reg_w(struct usb_device *dev,
-			    __u16 req,
-			    __u16 value,
-			    __u16 index,
-			    __u8 *buffer, __u16 length)
+/* write <len> bytes from gspca_dev->usb_buf */
+static void reg_w(struct gspca_dev *gspca_dev,
+		   __u16 req,
+		   __u16 value,
+		   __u16 index,
+		   __u16 len)
 {
-	usb_control_msg(dev,
-			usb_sndctrlpipe(dev, 0),
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
+		err("reg_w: buffer overflow");
+		return;
+	}
+#endif
+	usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
 			req,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value, index, buffer, length,
+			value, index,
+			len ? gspca_dev->usb_buf : NULL, len,
 			500);
 }
 
@@ -634,7 +650,7 @@ static int spca504B_PollingDataReady(struct gspca_dev *gspca_dev)
 	int count = 10;
 
 	while (--count > 0) {
-		reg_r(gspca_dev->dev, 0x21, 0, gspca_dev->usb_buf, 1);
+		reg_r(gspca_dev, 0x21, 0, 1);
 		if ((gspca_dev->usb_buf[0] & 0x01) == 0)
 			break;
 		msleep(10);
@@ -644,15 +660,14 @@ static int spca504B_PollingDataReady(struct gspca_dev *gspca_dev)
 
 static void spca504B_WaitCmdStatus(struct gspca_dev *gspca_dev)
 {
-	struct usb_device *dev = gspca_dev->dev;
 	int count = 50;
 
 	while (--count > 0) {
-		reg_r(dev, 0x21, 1, gspca_dev->usb_buf, 1);
+		reg_r(gspca_dev, 0x21, 1, 1);
 		if (gspca_dev->usb_buf[0] != 0) {
 			gspca_dev->usb_buf[0] = 0;
-			reg_w(dev, 0x21, 0, 1, gspca_dev->usb_buf, 1);
-			reg_r(dev, 0x21, 1, gspca_dev->usb_buf, 1);
+			reg_w(gspca_dev, 0x21, 0, 1, 1);
+			reg_r(gspca_dev, 0x21, 1, 1);
 			spca504B_PollingDataReady(gspca_dev);
 			break;
 		}
@@ -662,16 +677,14 @@ static void spca504B_WaitCmdStatus(struct gspca_dev *gspca_dev)
 
 static void spca50x_GetFirmware(struct gspca_dev *gspca_dev)
 {
-	struct usb_device *dev = gspca_dev->dev;
 	__u8 *data;
 
-	data = kmalloc(64, GFP_KERNEL);
-	reg_r(dev, 0x20, 0, data, 5);
+	data = gspca_dev->usb_buf;
+	reg_r(gspca_dev, 0x20, 0, 5);
 	PDEBUG(D_STREAM, "FirmWare : %d %d %d %d %d ",
 		data[0], data[1], data[2], data[3], data[4]);
-	reg_r(dev, 0x23, 0, data, 64);
-	reg_r(dev, 0x23, 1, data, 64);
-	kfree(data);
+	reg_r(gspca_dev, 0x23, 0, 64);
+	reg_r(gspca_dev, 0x23, 1, 64);
 }
 
 static void spca504B_SetSizeType(struct gspca_dev *gspca_dev)
@@ -686,21 +699,21 @@ static void spca504B_SetSizeType(struct gspca_dev *gspca_dev)
 	Type = 0;
 	switch (sd->bridge) {
 	case BRIDGE_SPCA533:
-		reg_w(dev, 0x31, 0, 0, NULL, 0);
+		reg_w(gspca_dev, 0x31, 0, 0, 0);
 		spca504B_WaitCmdStatus(gspca_dev);
 		rc = spca504B_PollingDataReady(gspca_dev);
 		spca50x_GetFirmware(gspca_dev);
 		gspca_dev->usb_buf[0] = 2;			/* type */
-		reg_w(dev, 0x24, 0, 8, gspca_dev->usb_buf, 1);
-		reg_r(dev, 0x24, 8, gspca_dev->usb_buf, 1);
+		reg_w(gspca_dev, 0x24, 0, 8, 1);
+		reg_r(gspca_dev, 0x24, 8, 1);
 
 		gspca_dev->usb_buf[0] = Size;
-		reg_w(dev, 0x25, 0, 4, gspca_dev->usb_buf, 1);
-		reg_r(dev, 0x25, 4, gspca_dev->usb_buf, 1);	/* size */
+		reg_w(gspca_dev, 0x25, 0, 4, 1);
+		reg_r(gspca_dev, 0x25, 4, 1);			/* size */
 		rc = spca504B_PollingDataReady(gspca_dev);
 
 		/* Init the cam width height with some values get on init ? */
-		reg_w(dev, 0x31, 0, 4, NULL, 0);
+		reg_w(gspca_dev, 0x31, 0, 4, 0);
 		spca504B_WaitCmdStatus(gspca_dev);
 		rc = spca504B_PollingDataReady(gspca_dev);
 		break;
@@ -708,12 +721,12 @@ static void spca504B_SetSizeType(struct gspca_dev *gspca_dev)
 /* case BRIDGE_SPCA504B: */
 /* case BRIDGE_SPCA536: */
 		gspca_dev->usb_buf[0] = Size;
-		reg_w(dev, 0x25, 0, 4, gspca_dev->usb_buf, 1);
-		reg_r(dev, 0x25, 4, gspca_dev->usb_buf, 1);	/* size */
+		reg_w(gspca_dev, 0x25, 0, 4, 1);
+		reg_r(gspca_dev, 0x25, 4, 1);			/* size */
 		Type = 6;
 		gspca_dev->usb_buf[0] = Type;
-		reg_w(dev, 0x27, 0, 0, gspca_dev->usb_buf, 1);
-		reg_r(dev, 0x27, 0, gspca_dev->usb_buf, 1);	/* type */
+		reg_w(gspca_dev, 0x27, 0, 0, 1);
+		reg_r(gspca_dev, 0x27, 0, 1);			/* type */
 		rc = spca504B_PollingDataReady(gspca_dev);
 		break;
 	case BRIDGE_SPCA504:
@@ -752,18 +765,15 @@ static void spca504_wait_status(struct gspca_dev *gspca_dev)
 
 static void spca504B_setQtable(struct gspca_dev *gspca_dev)
 {
-	struct usb_device *dev = gspca_dev->dev;
-
 	gspca_dev->usb_buf[0] = 3;
-	reg_w(dev, 0x26, 0, 0, gspca_dev->usb_buf, 1);
-	reg_r(dev, 0x26, 0, gspca_dev->usb_buf, 1);
+	reg_w(gspca_dev, 0x26, 0, 0, 1);
+	reg_r(gspca_dev, 0x26, 0, 1);
 	spca504B_PollingDataReady(gspca_dev);
 }
 
 static void sp5xx_initContBrigHueRegisters(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	int pollreg = 1;
 
 	switch (sd->bridge) {
@@ -774,20 +784,20 @@ static void sp5xx_initContBrigHueRegisters(struct gspca_dev *gspca_dev)
 	default:
 /*	case BRIDGE_SPCA533: */
 /*	case BRIDGE_SPCA504B: */
-		reg_w(dev, 0, 0, 0x21a7, NULL, 0);	/* brightness */
-		reg_w(dev, 0, 0x20, 0x21a8, NULL, 0);	/* contrast */
-		reg_w(dev, 0, 0, 0x21ad, NULL, 0);	/* hue */
-		reg_w(dev, 0, 1, 0x21ac, NULL, 0);	/* sat/hue */
-		reg_w(dev, 0, 0x20, 0x21ae, NULL, 0);	/* saturation */
-		reg_w(dev, 0, 0, 0x21a3, NULL, 0);	/* gamma */
+		reg_w(gspca_dev, 0, 0, 0x21a7, 0);	/* brightness */
+		reg_w(gspca_dev, 0, 0x20, 0x21a8, 0);	/* contrast */
+		reg_w(gspca_dev, 0, 0, 0x21ad, 0);	/* hue */
+		reg_w(gspca_dev, 0, 1, 0x21ac, 0);	/* sat/hue */
+		reg_w(gspca_dev, 0, 0x20, 0x21ae, 0);	/* saturation */
+		reg_w(gspca_dev, 0, 0, 0x21a3, 0);	/* gamma */
 		break;
 	case BRIDGE_SPCA536:
-		reg_w(dev, 0, 0, 0x20f0, NULL, 0);
-		reg_w(dev, 0, 0x21, 0x20f1, NULL, 0);
-		reg_w(dev, 0, 0x40, 0x20f5, NULL, 0);
-		reg_w(dev, 0, 1, 0x20f4, NULL, 0);
-		reg_w(dev, 0, 0x40, 0x20f6, NULL, 0);
-		reg_w(dev, 0, 0, 0x2089, NULL, 0);
+		reg_w(gspca_dev, 0, 0, 0x20f0, 0);
+		reg_w(gspca_dev, 0, 0x21, 0x20f1, 0);
+		reg_w(gspca_dev, 0, 0x40, 0x20f5, 0);
+		reg_w(gspca_dev, 0, 1, 0x20f4, 0);
+		reg_w(gspca_dev, 0, 0x40, 0x20f6, 0);
+		reg_w(gspca_dev, 0, 0, 0x2089, 0);
 		break;
 	}
 	if (pollreg)
@@ -799,7 +809,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 			const struct usb_device_id *id)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	struct cam *cam;
 
 	cam = &gspca_dev->cam;
@@ -811,7 +820,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	if (sd->subtype == AiptekMiniPenCam13) {
 /* try to get the firmware as some cam answer 2.0.1.2.2
  * and should be a spca504b then overwrite that setting */
-		reg_r(dev, 0x20, 0, gspca_dev->usb_buf, 1);
+		reg_r(gspca_dev, 0x20, 0, 1);
 		switch (gspca_dev->usb_buf[0]) {
 		case 1:
 			break;		/* (right bridge/subtype) */
@@ -848,8 +857,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct usb_device *dev = gspca_dev->dev;
@@ -860,12 +869,12 @@ static int sd_open(struct gspca_dev *gspca_dev)
 
 	switch (sd->bridge) {
 	case BRIDGE_SPCA504B:
-		reg_w(dev, 0x1d, 0, 0, NULL, 0);
-		reg_w(dev, 0, 1, 0x2306, NULL, 0);
-		reg_w(dev, 0, 0, 0x0d04, NULL, 0);
-		reg_w(dev, 0, 0, 0x2000, NULL, 0);
-		reg_w(dev, 0, 0x13, 0x2301, NULL, 0);
-		reg_w(dev, 0, 0, 0x2306, NULL, 0);
+		reg_w(gspca_dev, 0x1d, 0, 0, 0);
+		reg_w(gspca_dev, 0, 1, 0x2306, 0);
+		reg_w(gspca_dev, 0, 0, 0x0d04, 0);
+		reg_w(gspca_dev, 0, 0, 0x2000, 0);
+		reg_w(gspca_dev, 0, 0x13, 0x2301, 0);
+		reg_w(gspca_dev, 0, 0, 0x2306, 0);
 		/* fall thru */
 	case BRIDGE_SPCA533:
 		rc = spca504B_PollingDataReady(gspca_dev);
@@ -873,12 +882,12 @@ static int sd_open(struct gspca_dev *gspca_dev)
 		break;
 	case BRIDGE_SPCA536:
 		spca50x_GetFirmware(gspca_dev);
-		reg_r(dev, 0x00, 0x5002, gspca_dev->usb_buf, 1);
+		reg_r(gspca_dev, 0x00, 0x5002, 1);
 		gspca_dev->usb_buf[0] = 0;
-		reg_w(dev, 0x24, 0, 0, gspca_dev->usb_buf, 1);
-		reg_r(dev, 0x24, 0, gspca_dev->usb_buf, 1);
+		reg_w(gspca_dev, 0x24, 0, 0, 1);
+		reg_r(gspca_dev, 0x24, 0, 1);
 		rc = spca504B_PollingDataReady(gspca_dev);
-		reg_w(dev, 0x34, 0, 0, NULL, 0);
+		reg_w(gspca_dev, 0x34, 0, 0, 0);
 		spca504B_WaitCmdStatus(gspca_dev);
 		break;
 	case BRIDGE_SPCA504C:	/* pccam600 */
@@ -971,12 +980,12 @@ static void sd_start(struct gspca_dev *gspca_dev)
 /*	case BRIDGE_SPCA536: */
 		if (sd->subtype == MegapixV4 ||
 		    sd->subtype == LogitechClickSmart820) {
-			reg_w(dev, 0xf0, 0, 0, NULL, 0);
+			reg_w(gspca_dev, 0xf0, 0, 0, 0);
 			spca504B_WaitCmdStatus(gspca_dev);
-			reg_r(dev, 0xf0, 4, NULL, 0);
+			reg_r(gspca_dev, 0xf0, 4, 0);
 			spca504B_WaitCmdStatus(gspca_dev);
 		} else {
-			reg_w(dev, 0x31, 0, 4, NULL, 0);
+			reg_w(gspca_dev, 0x31, 0, 4, 0);
 			spca504B_WaitCmdStatus(gspca_dev);
 			rc = spca504B_PollingDataReady(gspca_dev);
 		}
@@ -1045,7 +1054,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 /*	case BRIDGE_SPCA533: */
 /*	case BRIDGE_SPCA536: */
 /*	case BRIDGE_SPCA504B: */
-		reg_w(dev, 0x31, 0, 0, NULL, 0);
+		reg_w(gspca_dev, 0x31, 0, 0, 0);
 		spca504B_WaitCmdStatus(gspca_dev);
 		spca504B_PollingDataReady(gspca_dev);
 		break;
@@ -1069,14 +1078,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	}
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1369,11 +1370,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
@@ -1456,6 +1455,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 91b555c34c6..f034c748fc7 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -30,7 +30,7 @@
 
 #define MAX_GAMMA 0x10		/* 0 to 15 */
 
-#define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 3)
+#define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 0)
 
 MODULE_AUTHOR("Leandro Costantino <le_costantino@pixartargentina.com.ar>");
 MODULE_DESCRIPTION("GSPCA/T613 (JPEG Compliance) USB Camera Driver");
@@ -233,7 +233,7 @@ static char *effects_control[] = {
 static struct v4l2_pix_format vga_mode_t16[] = {
 	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 3 / 8 + 590,
+		.sizeimage = 160 * 120 * 4 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 4},
 	{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
@@ -391,7 +391,7 @@ static void reg_w(struct gspca_dev *gspca_dev,
 				NULL, 0, 500);
 		return;
 	}
-	if (len <= sizeof gspca_dev->usb_buf) {
+	if (len <= USB_BUF_SZ) {
 		memcpy(gspca_dev->usb_buf, buffer, len);
 		usb_control_msg(gspca_dev->dev,
 				usb_sndctrlpipe(gspca_dev->dev, 0),
@@ -552,6 +552,13 @@ static int init_default_parameters(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	init_default_parameters(gspca_dev);
+	return 0;
+}
+
 static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -893,18 +900,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	setcolors(gspca_dev);
 }
 
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -972,24 +967,14 @@ static int sd_querymenu(struct gspca_dev *gspca_dev,
 	return -EINVAL;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
-{
-	init_default_parameters(gspca_dev);
-	return 0;
-}
-
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
-	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
 };
@@ -1014,6 +999,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c
index 1ff8ba2f7fe..084af05302a 100644
--- a/drivers/media/video/gspca/tv8532.c
+++ b/drivers/media/video/gspca/tv8532.c
@@ -331,8 +331,8 @@ static void tv_8532_PollReg(struct gspca_dev *gspca_dev)
 	}
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	reg_w_1(gspca_dev, TV8532_AD_SLOPE, 0x32);
 	reg_w_1(gspca_dev, TV8532_AD_BITCTRL, 0x00);
@@ -450,14 +450,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w_1(gspca_dev, TV8532_GPIO_OE, 0x0b);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void tv8532_preprocess(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -611,11 +603,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
@@ -644,6 +634,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index a4221753e1b..bd4c226c9a0 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -69,6 +69,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setautogain,
 	    .get = sd_getautogain,
 	},
+#define LIGHTFREQ_IDX 1
 	{
 	    {
 		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
@@ -87,13 +88,13 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format vc0321_mode[] = {
-	{320, 240, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE,
-		.bytesperline = 320 * 2,
+	{320, 240, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
+		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
-	{640, 480, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE,
-		.bytesperline = 640 * 2,
+	{640, 480, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
+		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
@@ -1463,6 +1464,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->qindex = 7;
 	sd->autogain = AUTOGAIN_DEF;
 	sd->lightfreq = FREQ_DEF;
+	if (sd->sensor != SENSOR_OV7670)
+		gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
 
 	if (sd->bridge == BRIDGE_VC0321) {
 		reg_r(gspca_dev, 0x8a, 0, 3);
@@ -1474,8 +1477,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	return 0;
 }
@@ -1637,19 +1640,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	reg_w(dev, 0x89, 0xffff, 0xffff);
 }
 
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-/*	struct usb_device *dev = gspca_dev->dev;
-	__u8 buffread;
-
-	reg_w(dev, 0x89, 0xffff, 0xffff);
-	reg_w(dev, 0xa0, 0x01, 0xb301);
-	reg_w(dev, 0xa0, 0x09, 0xb303);
-	reg_w(dev, 0x89, 0xffff, 0xffff);
-*/
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1738,11 +1728,10 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
 };
@@ -1774,6 +1763,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 22a994ccb1d..8d7c27e6ac7 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -85,6 +85,7 @@ static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
 #define SD_BRIGHTNESS 0
 	{
 	    {
@@ -141,6 +142,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setautogain,
 	    .get = sd_getautogain,
 	},
+#define LIGHTFREQ_IDX 4
 #define SD_FREQ 4
 	{
 	    {
@@ -6469,7 +6471,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		NULL, Tgradient_1, Tgradient_2,
 		Tgradient_3, Tgradient_4, Tgradient_5, Tgradient_6
 	};
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 	__u8 v[16];
 #endif
 
@@ -6487,7 +6489,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		else if (g <= 0)
 			g = 1;
 		reg_w(dev, g, 0x0120 + i);	/* gamma */
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 		if (gspca_debug & D_CONF)
 			v[i] = g;
 #endif
@@ -6507,7 +6509,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 				g = 1;
 		}
 		reg_w(dev, g, 0x0130 + i);	/* gradient */
-#ifdef CONFIG_VIDEO_ADV_DEBUG
+#ifdef GSPCA_DEBUG
 		if (gspca_debug & D_CONF)
 			v[i] = g;
 #endif
@@ -6964,8 +6966,13 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev)
 	case SENSOR_MC501CB:
 		return -1;		/* don't probe */
 	case SENSOR_TAS5130C_VF0250:
-				/* may probe but with write in reg 0x0010 */
+			/* may probe but with no write in reg 0x0010 */
 		return -1;		/* don't probe */
+	case SENSOR_PAS106:
+		sensor =  sif_probe(gspca_dev);
+		if (sensor >= 0)
+			return sensor;
+		break;
 	}
 	sensor = vga_2wr_probe(gspca_dev);
 	if (sensor >= 0) {
@@ -6974,12 +6981,10 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev)
 		/* next probe is needed for OmniVision ? */
 	}
 	sensor2 = vga_3wr_probe(gspca_dev);
-	if (sensor2 >= 0) {
-		if (sensor >= 0)
-			return sensor;
-		return sensor2;
-	}
-	return sif_probe(gspca_dev);
+	if (sensor2 >= 0
+	    && sensor >= 0)
+		return sensor;
+	return sensor2;
 }
 
 /* this function is called at probe time */
@@ -7147,13 +7152,27 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->lightfreq = sd_ctrls[SD_FREQ].qctrl.default_value;
 	sd->sharpness = sd_ctrls[SD_SHARPNESS].qctrl.default_value;
 
+	switch (sd->sensor) {
+	case SENSOR_GC0305:
+	case SENSOR_OV7620:
+	case SENSOR_PO2030:
+		gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX);
+		break;
+	case SENSOR_HDCS2020:
+	case SENSOR_HV7131B:
+	case SENSOR_HV7131C:
+	case SENSOR_OV7630C:
+		gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
+		break;
+	}
+
 	/* switch the led off */
 	reg_w(gspca_dev->dev, 0x01, 0x0000);
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	reg_w(gspca_dev->dev, 0x01, 0x0000);
 	return 0;
@@ -7314,10 +7333,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	}
 }
 
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -7325,11 +7340,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	send_unknown(gspca_dev->dev, sd->sensor);
 }
 
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,
 			__u8 *data,
@@ -7489,37 +7499,30 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = sizeof sd_ctrls / sizeof sd_ctrls[0],
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
-	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
 };
 
 static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x041e)},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x041e, 0x4017)},
-	{USB_DEVICE(0x041e, 0x401c)},
+	{USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x401e)},
 	{USB_DEVICE(0x041e, 0x401f)},
-#endif
+	{USB_DEVICE(0x041e, 0x4022)},
 	{USB_DEVICE(0x041e, 0x4029)},
-#ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x041e, 0x4034)},
-	{USB_DEVICE(0x041e, 0x4035)},
+	{USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x4036)},
 	{USB_DEVICE(0x041e, 0x403a)},
-#endif
 	{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
 	{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x0458, 0x7007)},
 	{USB_DEVICE(0x0458, 0x700c)},
 	{USB_DEVICE(0x0458, 0x700f)},
-#endif
 	{USB_DEVICE(0x0461, 0x0a00)},
 	{USB_DEVICE(0x046d, 0x08a0)},
 	{USB_DEVICE(0x046d, 0x08a1)},
@@ -7531,7 +7534,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x046d, 0x08aa)},
 	{USB_DEVICE(0x046d, 0x08ac)},
 	{USB_DEVICE(0x046d, 0x08ad)},
-#ifndef CONFIG_USB_ZC0301
+#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE
 	{USB_DEVICE(0x046d, 0x08ae)},
 #endif
 	{USB_DEVICE(0x046d, 0x08af)},
@@ -7541,27 +7544,25 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x046d, 0x08d8)},
 	{USB_DEVICE(0x046d, 0x08da)},
 	{USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
-	{USB_DEVICE(0x0471, 0x0325)},
-	{USB_DEVICE(0x0471, 0x0326)},
-	{USB_DEVICE(0x0471, 0x032d)},
-	{USB_DEVICE(0x0471, 0x032e)},
+	{USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x0471, 0x0326), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x055f, 0xc005)},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x055f, 0xd003)},
 	{USB_DEVICE(0x055f, 0xd004)},
-#endif
 	{USB_DEVICE(0x0698, 0x2003)},
+	{USB_DEVICE(0x0ac8, 0x0301), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x0ac8, 0x0302)},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x0ac8, 0x301b)},
+#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE
 	{USB_DEVICE(0x0ac8, 0x303b)},
 #endif
 	{USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x0ac8, 0x307b)},
 	{USB_DEVICE(0x10fd, 0x0128)},
+	{USB_DEVICE(0x10fd, 0x804d)},
 	{USB_DEVICE(0x10fd, 0x8050)},
-#endif
 	{}			/* end of entry */
 };
 #undef DVNAME
@@ -7581,6 +7582,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 static int __init sd_mod_init(void)
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index aea1664948c..4afc7ea07e8 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -688,7 +688,7 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv)
 	spin_lock_init(&itv->lock);
 	spin_lock_init(&itv->dma_reg_lock);
 
-	itv->irq_work_queues = create_workqueue(itv->name);
+	itv->irq_work_queues = create_singlethread_workqueue(itv->name);
 	if (itv->irq_work_queues == NULL) {
 		IVTV_ERR("Could not create ivtv workqueue\n");
 		return -1;
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index ab287b48fc2..2ceb5227637 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -251,6 +251,7 @@ struct ivtv_mailbox_data {
 #define IVTV_F_I_DEC_PAUSED	   20 	/* the decoder is paused */
 #define IVTV_F_I_INITED		   21 	/* set after first open */
 #define IVTV_F_I_FAILED		   22 	/* set if first open failed */
+#define IVTV_F_I_WORK_INITED       23	/* worker thread was initialized */
 
 /* Event notifications */
 #define IVTV_F_I_EV_DEC_STOPPED	   28	/* decoder stopped event */
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index fba150a6cd2..34f3ab82785 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -76,6 +76,13 @@ void ivtv_irq_work_handler(struct work_struct *work)
 
 	DEFINE_WAIT(wait);
 
+	if (test_and_clear_bit(IVTV_F_I_WORK_INITED, &itv->i_flags)) {
+		struct sched_param param = { .sched_priority = 99 };
+
+		/* This thread must use the FIFO scheduler as it
+		   is realtime sensitive. */
+		sched_setscheduler(current, SCHED_FIFO, &param);
+	}
 	if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags))
 		ivtv_pio_work_handler(itv);
 
@@ -678,34 +685,14 @@ static void ivtv_irq_enc_start_cap(struct ivtv *itv)
 
 static void ivtv_irq_enc_vbi_cap(struct ivtv *itv)
 {
-	struct ivtv_stream *s_mpg = &itv->streams[IVTV_ENC_STREAM_TYPE_MPG];
 	u32 data[CX2341X_MBOX_MAX_DATA];
 	struct ivtv_stream *s;
 
 	IVTV_DEBUG_HI_IRQ("ENC START VBI CAP\n");
 	s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
 
-	/* If more than two VBI buffers are pending, then
-	   clear the old ones and start with this new one.
-	   This can happen during transition stages when MPEG capturing is
-	   started, but the first interrupts haven't arrived yet. During
-	   that period VBI requests can accumulate without being able to
-	   DMA the data. Since at most four VBI DMA buffers are available,
-	   we just drop the old requests when there are already three
-	   requests queued. */
-	if (s->sg_pending_size > 2) {
-		struct ivtv_buffer *buf;
-		list_for_each_entry(buf, &s->q_predma.list, list)
-			ivtv_buf_sync_for_cpu(s, buf);
-		ivtv_queue_move(s, &s->q_predma, NULL, &s->q_free, 0);
-		s->sg_pending_size = 0;
-	}
-	/* if we can append the data, and the MPEG stream isn't capturing,
-	   then start a DMA request for just the VBI data. */
-	if (!stream_enc_dma_append(s, data) &&
-			!test_bit(IVTV_F_S_STREAMING, &s_mpg->s_flags)) {
+	if (!stream_enc_dma_append(s, data))
 		set_bit(ivtv_use_pio(s) ? IVTV_F_S_PIO_PENDING : IVTV_F_S_DMA_PENDING, &s->s_flags);
-	}
 }
 
 static void ivtv_irq_dec_vbi_reinsert(struct ivtv *itv)
diff --git a/drivers/media/video/ivtv/ivtv-queue.h b/drivers/media/video/ivtv/ivtv-queue.h
index 7cfc0c9ab05..476556afd39 100644
--- a/drivers/media/video/ivtv/ivtv-queue.h
+++ b/drivers/media/video/ivtv/ivtv-queue.h
@@ -23,7 +23,7 @@
 #define IVTV_QUEUE_H
 
 #define IVTV_DMA_UNMAPPED	((u32) -1)
-#define SLICED_VBI_PIO 1
+#define SLICED_VBI_PIO 0
 
 /* ivtv_buffer utility functions */
 
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index 54d2023b26c..730e85d86fc 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -363,7 +363,7 @@ static void ivtv_vbi_setup(struct ivtv *itv)
 	/* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */
 	data[1] = 1;
 	/* The VBI frames are stored in a ringbuffer with this size (with a VBI frame as unit) */
-	data[2] = raw ? 4 : 8;
+	data[2] = raw ? 4 : 4 * (itv->vbi.raw_size / itv->vbi.enc_size);
 	/* The start/stop codes determine which VBI lines end up in the raw VBI data area.
 	   The codes are from table 24 in the saa7115 datasheet. Each raw/sliced/video line
 	   is framed with codes FF0000XX where XX is the SAV/EAV (Start/End of Active Video)
diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c
index 71798f0da27..1ce9deb1104 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.c
+++ b/drivers/media/video/ivtv/ivtv-vbi.c
@@ -293,6 +293,7 @@ static u32 compress_sliced_buf(struct ivtv *itv, u32 line, u8 *buf, u32 size, u8
 	u32 line_size = itv->vbi.sliced_decoder_line_size;
 	struct v4l2_decode_vbi_line vbi;
 	int i;
+	unsigned lines = 0;
 
 	/* find the first valid line */
 	for (i = 0; i < size; i++, buf++) {
@@ -313,7 +314,8 @@ static u32 compress_sliced_buf(struct ivtv *itv, u32 line, u8 *buf, u32 size, u8
 		}
 		vbi.p = p + 4;
 		itv->video_dec_func(itv, VIDIOC_INT_DECODE_VBI_LINE, &vbi);
-		if (vbi.type) {
+		if (vbi.type && !(lines & (1 << vbi.line))) {
+			lines |= 1 << vbi.line;
 			itv->vbi.sliced_data[line].id = vbi.type;
 			itv->vbi.sliced_data[line].field = vbi.is_second_field;
 			itv->vbi.sliced_data[line].line = vbi.line;
diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h
index 442f43f11b7..8cd753d30bf 100644
--- a/drivers/media/video/ivtv/ivtv-version.h
+++ b/drivers/media/video/ivtv/ivtv-version.h
@@ -22,7 +22,7 @@
 
 #define IVTV_DRIVER_NAME "ivtv"
 #define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 3
+#define IVTV_DRIVER_VERSION_MINOR 4
 #define IVTV_DRIVER_VERSION_PATCHLEVEL 0
 
 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c
index 4895540be19..2fd4b4a44aa 100644
--- a/drivers/media/video/ks0127.c
+++ b/drivers/media/video/ks0127.c
@@ -679,26 +679,27 @@ static int ks0127_command(struct i2c_client *client,
 
 	case DECODER_ENABLE_OUTPUT:
 	{
+		int enable;
 
-		int *iarg = arg;
-		int enable = (*iarg != 0);
-			if (enable) {
-				dprintk("ks0127: command "
+		iarg = arg;
+		enable = (*iarg != 0);
+		if (enable) {
+			dprintk("ks0127: command "
 					"DECODER_ENABLE_OUTPUT on "
 					"(%d)\n", enable);
-				/* All output pins on */
-				ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30);
-				/* Obey the OEN pin */
-				ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00);
-			} else {
-				dprintk("ks0127: command "
+			/* All output pins on */
+			ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30);
+			/* Obey the OEN pin */
+			ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00);
+		} else {
+			dprintk("ks0127: command "
 					"DECODER_ENABLE_OUTPUT off "
 					"(%d)\n", enable);
-				/* Video output pins off */
-				ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00);
-				/* Ignore the OEN pin */
-				ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80);
-			}
+			/* Video output pins off */
+			ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00);
+			/* Ignore the OEN pin */
+			ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80);
+		}
 	}
 		break;
 
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 7c8ef6ac6c3..a9ef7802eb5 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -1806,6 +1806,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 	memcpy(meye.video_dev, &meye_template, sizeof(meye_template));
 	meye.video_dev->parent = &meye.mchip_dev->dev;
 
+	ret = -EIO;
 	if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) {
 		printk(KERN_ERR "meye: unable to power on the camera\n");
 		printk(KERN_ERR "meye: did you enable the camera in "
@@ -1813,7 +1814,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 		goto outsonypienable;
 	}
 
-	ret = -EIO;
 	if ((ret = pci_enable_device(meye.mchip_dev))) {
 		printk(KERN_ERR "meye: pci_enable_device failed\n");
 		goto outenabledev;
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index b31ba4e0932..56808cd2f8a 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -25,7 +25,7 @@
 
 static char *sensor_type;
 module_param(sensor_type, charp, S_IRUGO);
-MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"\n");
+MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"");
 
 /* mt9v022 selected register addresses */
 #define MT9V022_CHIP_VERSION		0x00
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index f68e91fbe7f..8ef578caba3 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -931,27 +931,29 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
 	return 0;
 }
 
-static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std)
+static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard)
 {
-	struct mxb* mxb = (struct mxb*)dev->ext_priv;
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
 	int zero = 0;
 	int one = 1;
 
-	if(V4L2_STD_PAL_I == std->id ) {
+	if (V4L2_STD_PAL_I == standard->id) {
 		v4l2_std_id std = V4L2_STD_PAL_I;
+
 		DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
 		/* set the 7146 gpio register -- I don't know what this does exactly */
 		saa7146_write(dev, GPIO_CTRL, 0x00404050);
 		/* unset the 7111 gpio register -- I don't know what this does exactly */
-		mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero);
+		mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &zero);
 		mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
 	} else {
 		v4l2_std_id std = V4L2_STD_PAL_BG;
+
 		DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
 		/* set the 7146 gpio register -- I don't know what this does exactly */
 		saa7146_write(dev, GPIO_CTRL, 0x00404050);
 		/* set the 7111 gpio register -- I don't know what this does exactly */
-		mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one);
+		mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &one);
 		mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
 	}
 	return 0;
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 9edaca4371d..3d3c48db45d 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -626,9 +626,9 @@ ov511_i2c_write_internal(struct usb_ov511 *ov,
 			break;
 
 		/* Retry until idle */
-		do
+		do {
 			rc = reg_r(ov, R511_I2C_CTL);
-		while (rc > 0 && ((rc&1) == 0));
+		} while (rc > 0 && ((rc&1) == 0));
 		if (rc < 0)
 			break;
 
@@ -703,9 +703,9 @@ ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg)
 			return rc;
 
 		/* Retry until idle */
-		do
-			 rc = reg_r(ov, R511_I2C_CTL);
-		while (rc > 0 && ((rc&1) == 0));
+		do {
+			rc = reg_r(ov, R511_I2C_CTL);
+		} while (rc > 0 && ((rc & 1) == 0));
 		if (rc < 0)
 			return rc;
 
@@ -729,9 +729,9 @@ ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg)
 			return rc;
 
 		/* Retry until idle */
-		do
+		do {
 			rc = reg_r(ov, R511_I2C_CTL);
-		while (rc > 0 && ((rc&1) == 0));
+		} while (rc > 0 && ((rc&1) == 0));
 		if (rc < 0)
 			return rc;
 
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c
deleted file mode 100644
index e69de29bb2d..00000000000
--- a/drivers/media/video/planb.c
+++ /dev/null
diff --git a/drivers/media/video/planb.h b/drivers/media/video/planb.h
deleted file mode 100644
index e69de29bb2d..00000000000
--- a/drivers/media/video/planb.h
+++ /dev/null
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index 00425d74365..7c84f795db5 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -1019,10 +1019,23 @@ static int init_mediavision(void)
  *	Initialization and module stuff
  */
 
+#ifndef MODULE
+static int enable;
+module_param(enable, int, 0);
+#endif
+
 static int __init init_pms_cards(void)
 {
 	printk(KERN_INFO "Mediavision Pro Movie Studio driver 0.02\n");
 
+#ifndef MODULE
+	if (!enable) {
+		printk(KERN_INFO "PMS: not enabled, use pms.enable=1 to "
+				 "probe\n");
+		return -ENODEV;
+	}
+#endif
+
 	data_port = io_port +1;
 
 	if(init_mediavision())
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 1cccd5c7704..dbc56074255 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -1635,15 +1635,15 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 
 	case VIDIOCPWCGVIDCMD:
 	{
-		ARG_DEF(struct pwc_video_command, cmd);
-
-		ARGR(cmd).type = pdev->type;
-		ARGR(cmd).release = pdev->release;
-		ARGR(cmd).command_len = pdev->cmd_len;
-		memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
-		ARGR(cmd).bandlength = pdev->vbandlength;
-		ARGR(cmd).frame_size = pdev->frame_size;
-		ARG_OUT(cmd)
+		ARG_DEF(struct pwc_video_command, vcmd);
+
+		ARGR(vcmd).type = pdev->type;
+		ARGR(vcmd).release = pdev->release;
+		ARGR(vcmd).command_len = pdev->cmd_len;
+		memcpy(&ARGR(vcmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
+		ARGR(vcmd).bandlength = pdev->vbandlength;
+		ARGR(vcmd).frame_size = pdev->frame_size;
+		ARG_OUT(vcmd)
 		break;
 	}
 	/*
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index b15f82c4976..388cf94055d 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -36,8 +36,8 @@
 #include <linux/videodev2.h>
 
 #include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/camera.h>
+#include <mach/pxa-regs.h>
+#include <mach/camera.h>
 
 #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
 #define PXA_CAM_DRV_NAME "pxa27x-camera"
@@ -128,6 +128,8 @@ struct pxa_camera_dev {
 
 	struct pxa_buffer	*active;
 	struct pxa_dma_desc	*sg_tail[3];
+
+	u32			save_cicr[5];
 };
 
 static const char *pxa_cam_driver_description = "PXA_Camera";
@@ -997,10 +999,64 @@ static int pxa_camera_querycap(struct soc_camera_host *ici,
 	return 0;
 }
 
+static int pxa_camera_suspend(struct soc_camera_device *icd, pm_message_t state)
+{
+	struct soc_camera_host *ici =
+		to_soc_camera_host(icd->dev.parent);
+	struct pxa_camera_dev *pcdev = ici->priv;
+	int i = 0, ret = 0;
+
+	pcdev->save_cicr[i++] = CICR0;
+	pcdev->save_cicr[i++] = CICR1;
+	pcdev->save_cicr[i++] = CICR2;
+	pcdev->save_cicr[i++] = CICR3;
+	pcdev->save_cicr[i++] = CICR4;
+
+	if ((pcdev->icd) && (pcdev->icd->ops->suspend))
+		ret = pcdev->icd->ops->suspend(pcdev->icd, state);
+
+	return ret;
+}
+
+static int pxa_camera_resume(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici =
+		to_soc_camera_host(icd->dev.parent);
+	struct pxa_camera_dev *pcdev = ici->priv;
+	int i = 0, ret = 0;
+
+	DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD;
+	DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD;
+	DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD;
+
+	CICR0 = pcdev->save_cicr[i++] & ~CICR0_ENB;
+	CICR1 = pcdev->save_cicr[i++];
+	CICR2 = pcdev->save_cicr[i++];
+	CICR3 = pcdev->save_cicr[i++];
+	CICR4 = pcdev->save_cicr[i++];
+
+	if ((pcdev->icd) && (pcdev->icd->ops->resume))
+		ret = pcdev->icd->ops->resume(pcdev->icd);
+
+	/* Restart frame capture if active buffer exists */
+	if (!ret && pcdev->active) {
+		/* Reset the FIFOs */
+		CIFR |= CIFR_RESET_F;
+		/* Enable End-Of-Frame Interrupt */
+		CICR0 &= ~CICR0_EOFM;
+		/* Restart the Capture Interface */
+		CICR0 |= CICR0_ENB;
+	}
+
+	return ret;
+}
+
 static struct soc_camera_host_ops pxa_soc_camera_host_ops = {
 	.owner		= THIS_MODULE,
 	.add		= pxa_camera_add_device,
 	.remove		= pxa_camera_remove_device,
+	.suspend	= pxa_camera_suspend,
+	.resume		= pxa_camera_resume,
 	.set_fmt_cap	= pxa_camera_set_fmt_cap,
 	.try_fmt_cap	= pxa_camera_try_fmt_cap,
 	.init_videobuf	= pxa_camera_init_videobuf,
@@ -1198,7 +1254,7 @@ static int __devinit pxa_camera_init(void)
 
 static void __exit pxa_camera_exit(void)
 {
-	return platform_driver_unregister(&pxa_camera_driver);
+	platform_driver_unregister(&pxa_camera_driver);
 }
 
 module_init(pxa_camera_init);
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index bcd1c8f6cf6..ad733caec72 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1489,10 +1489,9 @@ static int saa7115_probe(struct i2c_client *client,
 		 client->addr << 1, client->adapter->name);
 
 	state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
-	i2c_set_clientdata(client, state);
-	if (state == NULL) {
+	if (state == NULL)
 		return -ENOMEM;
-	}
+	i2c_set_clientdata(client, state);
 	state->input = -1;
 	state->output = SAA7115_IPORT_ON;
 	state->enable = 1;
diff --git a/drivers/media/video/saa7196.h b/drivers/media/video/saa7196.h
deleted file mode 100644
index e69de29bb2d..00000000000
--- a/drivers/media/video/saa7196.h
+++ /dev/null
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index f481277892d..acceed5d04a 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -1397,7 +1397,7 @@ static int se401_probe(struct usb_interface *intf,
 	mutex_init(&se401->lock);
 	wmb();
 
-	if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+	if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		kfree(se401);
 		err("video_register_device failed");
 		return -EIO;
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index f7ca3cb9340..318754e7313 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -647,7 +647,7 @@ static int __init sh_mobile_ceu_init(void)
 
 static void __exit sh_mobile_ceu_exit(void)
 {
-	return platform_driver_unregister(&sh_mobile_ceu_driver);
+	platform_driver_unregister(&sh_mobile_ceu_driver);
 }
 
 module_init(sh_mobile_ceu_init);
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 23408764d0e..2da6938718f 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -3312,6 +3312,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	cam->v4ldev->fops = &sn9c102_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
+	cam->v4ldev->parent = &udev->dev;
 
 	init_completion(&cam->probe);
 
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index 6ff489baacf..90a401dc388 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -40,11 +40,14 @@ struct sn9c102_device;
 
 static const struct usb_device_id sn9c102_id_table[] = {
 	/* SN9C101 and SN9C102 */
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6001, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6019, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6024, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6025, BRIDGE_SN9C102), },
@@ -53,29 +56,33 @@ static const struct usb_device_id sn9c102_id_table[] = {
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), },
 	/* SN9C103 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), }, HY7131D/E */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5130 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), },
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), },
@@ -105,7 +112,7 @@ static const struct usb_device_id sn9c102_id_table[] = {
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), }, MO8000 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x613c, BRIDGE_SN9C120), },
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index b6be5ee678b..66ebe5956a8 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -732,10 +732,36 @@ static int soc_camera_remove(struct device *dev)
 	return 0;
 }
 
+static int soc_camera_suspend(struct device *dev, pm_message_t state)
+{
+	struct soc_camera_device *icd = to_soc_camera_dev(dev);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	int ret = 0;
+
+	if (ici->ops->suspend)
+		ret = ici->ops->suspend(icd, state);
+
+	return ret;
+}
+
+static int soc_camera_resume(struct device *dev)
+{
+	struct soc_camera_device *icd = to_soc_camera_dev(dev);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	int ret = 0;
+
+	if (ici->ops->resume)
+		ret = ici->ops->resume(icd);
+
+	return ret;
+}
+
 static struct bus_type soc_camera_bus_type = {
 	.name		= "soc-camera",
 	.probe		= soc_camera_probe,
 	.remove		= soc_camera_remove,
+	.suspend	= soc_camera_suspend,
+	.resume		= soc_camera_resume,
 };
 
 static struct device_driver ic_drv = {
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index eefb0327ebb..1adc257ebdb 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -187,7 +187,7 @@ static int __init soc_camera_platform_module_init(void)
 
 static void __exit soc_camera_platform_module_exit(void)
 {
-	return platform_driver_unregister(&soc_camera_platform_driver);
+	platform_driver_unregister(&soc_camera_platform_driver);
 }
 
 module_init(soc_camera_platform_module_init);
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index 56dc3d6b5b2..dce94743945 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -1462,7 +1462,7 @@ static int stv680_probe (struct usb_interface *intf, const struct usb_device_id
 	mutex_init (&stv680->lock);
 	wmb ();
 
-	if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+	if (video_register_device(stv680->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		PDEBUG (0, "STV(e): video_register_device failed");
 		retval = -EIO;
 		goto error_vdev;
diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c
index 59166b76010..cc27efe121d 100644
--- a/drivers/media/video/usbvideo/ibmcam.c
+++ b/drivers/media/video/usbvideo/ibmcam.c
@@ -736,12 +736,12 @@ static enum ParseState ibmcam_model2_320x240_parse_lines(
 		 * make black color and quit the horizontal scanning loop.
 		 */
 		if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
-			const int j = i * V4L_BYTES_PER_PIXEL;
+			const int offset = i * V4L_BYTES_PER_PIXEL;
 #if USES_IBMCAM_PUTPIXEL
 			/* Refresh 'f' because we don't use it much with PUTPIXEL */
-			f = frame->data + (v4l_linesize * frame->curline) + j;
+			f = frame->data + (v4l_linesize * frame->curline) + offset;
 #endif
-			memset(f, 0, v4l_linesize - j);
+			memset(f, 0, v4l_linesize - offset);
 			break;
 		}
 
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index b7792451a29..2eb45829791 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -866,7 +866,7 @@ vicam_probe( struct usb_interface *intf, const struct usb_device_id *id)
 	cam->udev = dev;
 	cam->bulkEndpoint = bulkEndpoint;
 
-	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) == -1) {
+	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) < 0) {
 		kfree(cam);
 		printk(KERN_WARNING "video_register_device failed\n");
 		return -EIO;
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 626f4ad7e87..6ef3e5297de 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -585,13 +585,17 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
 	struct uvc_control_mapping *mapping;
 	struct uvc_menu_info *menu;
 	unsigned int i;
-	__u8 data[8];
+	__u8 *data;
 	int ret;
 
 	ctrl = uvc_find_control(video, v4l2_ctrl->id, &mapping);
 	if (ctrl == NULL)
 		return -EINVAL;
 
+	data = kmalloc(8, GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
 	memset(v4l2_ctrl, 0, sizeof *v4l2_ctrl);
 	v4l2_ctrl->id = mapping->id;
 	v4l2_ctrl->type = mapping->v4l2_type;
@@ -604,8 +608,8 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
 	if (ctrl->info->flags & UVC_CONTROL_GET_DEF) {
 		if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id,
 				video->dev->intfnum, ctrl->info->selector,
-				&data, ctrl->info->size)) < 0)
-			return ret;
+				data, ctrl->info->size)) < 0)
+			goto out;
 		v4l2_ctrl->default_value = uvc_get_le_value(data, mapping);
 	}
 
@@ -623,13 +627,15 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
 			}
 		}
 
-		return 0;
+		ret = 0;
+		goto out;
 
 	case V4L2_CTRL_TYPE_BOOLEAN:
 		v4l2_ctrl->minimum = 0;
 		v4l2_ctrl->maximum = 1;
 		v4l2_ctrl->step = 1;
-		return 0;
+		ret = 0;
+		goto out;
 
 	default:
 		break;
@@ -638,26 +644,29 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
 	if (ctrl->info->flags & UVC_CONTROL_GET_MIN) {
 		if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id,
 				video->dev->intfnum, ctrl->info->selector,
-				&data, ctrl->info->size)) < 0)
-			return ret;
+				data, ctrl->info->size)) < 0)
+			goto out;
 		v4l2_ctrl->minimum = uvc_get_le_value(data, mapping);
 	}
 	if (ctrl->info->flags & UVC_CONTROL_GET_MAX) {
 		if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id,
 				video->dev->intfnum, ctrl->info->selector,
-				&data, ctrl->info->size)) < 0)
-			return ret;
+				data, ctrl->info->size)) < 0)
+			goto out;
 		v4l2_ctrl->maximum = uvc_get_le_value(data, mapping);
 	}
 	if (ctrl->info->flags & UVC_CONTROL_GET_RES) {
 		if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id,
 				video->dev->intfnum, ctrl->info->selector,
-				&data, ctrl->info->size)) < 0)
-			return ret;
+				data, ctrl->info->size)) < 0)
+			goto out;
 		v4l2_ctrl->step = uvc_get_le_value(data, mapping);
 	}
 
-	return 0;
+	ret = 0;
+out:
+	kfree(data);
+	return ret;
 }
 
 
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index b3c4d75e849..7e102034d38 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1884,7 +1884,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
-	/* Packard Bell OEM Webcam */
+	/* Packard Bell OEM Webcam - Bison Electronics */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x5986,
@@ -1893,7 +1893,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
-	/* Acer Crystal Eye webcam */
+	/* Acer Crystal Eye webcam - Bison Electronics */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x5986,
@@ -1902,7 +1902,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
-	/* Medion Akoya Mini E1210 */
+	/* Medion Akoya Mini E1210 - Bison Electronics */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x5986,
@@ -1911,7 +1911,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
-	/* Acer OrbiCam - Unknown vendor */
+	/* Acer OrbiCam - Bison Electronics */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x5986,
@@ -1920,6 +1920,24 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
+	/* Bison Electronics */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x5986,
+	  .idProduct		= 0x0300,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
+	/* Clevo M570TU - Bison Electronics */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x5986,
+	  .idProduct		= 0x0303,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
 	/* Generic USB Video Class */
 	{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
 	{}
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index ad63794fda7..6854ac78a16 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -90,17 +90,20 @@ static void uvc_fixup_buffer_size(struct uvc_video_device *video,
 static int uvc_get_video_ctrl(struct uvc_video_device *video,
 	struct uvc_streaming_control *ctrl, int probe, __u8 query)
 {
-	__u8 data[34];
-	__u8 size;
+	__u8 *data;
+	__u16 size;
 	int ret;
 
 	size = video->dev->uvc_version >= 0x0110 ? 34 : 26;
+	data = kmalloc(size, GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
 	ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum,
-		probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size,
+		probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, data, size,
 		UVC_CTRL_STREAMING_TIMEOUT);
-
 	if (ret < 0)
-		return ret;
+		goto out;
 
 	ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]);
 	ctrl->bFormatIndex = data[2];
@@ -136,17 +139,22 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video,
 	 */
 	uvc_fixup_buffer_size(video, ctrl);
 
-	return 0;
+out:
+	kfree(data);
+	return ret;
 }
 
 int uvc_set_video_ctrl(struct uvc_video_device *video,
 	struct uvc_streaming_control *ctrl, int probe)
 {
-	__u8 data[34];
-	__u8 size;
+	__u8 *data;
+	__u16 size;
+	int ret;
 
 	size = video->dev->uvc_version >= 0x0110 ? 34 : 26;
-	memset(data, 0, sizeof data);
+	data = kzalloc(size, GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
 
 	*(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint);
 	data[2] = ctrl->bFormatIndex;
@@ -174,10 +182,13 @@ int uvc_set_video_ctrl(struct uvc_video_device *video,
 		data[33] = ctrl->bMaxVersion;
 	}
 
-	return __uvc_query_ctrl(video->dev, SET_CUR, 0,
+	ret = __uvc_query_ctrl(video->dev, SET_CUR, 0,
 		video->streaming->intfnum,
-		probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size,
+		probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, data, size,
 		UVC_CTRL_STREAMING_TIMEOUT);
+
+	kfree(data);
+	return ret;
 }
 
 int uvc_probe_video(struct uvc_video_device *video,
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 556615fe93d..155fdec9ac7 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -222,11 +222,13 @@ int video_register_device(struct video_device *vfd, int type, int nr)
 EXPORT_SYMBOL(video_register_device);
 
 /**
- *	video_register_device - register video4linux devices
+ *	video_register_device_index - register video4linux devices
  *	@vfd:  video device structure we want to register
  *	@type: type of device to register
  *	@nr:   which device number (0 == /dev/video0, 1 == /dev/video1, ...
  *             -1 == first free)
+ *	@index: stream number based on parent device;
+ *		-1 if auto assign, requested number otherwise
  *
  *	The registration code assigns minor numbers based on the type
  *	requested. -ENFILE is returned in all the device slots for this
@@ -255,6 +257,9 @@ int video_register_device_index(struct video_device *vfd, int type, int nr,
 	int ret;
 	char *name_base;
 
+	if (vfd == NULL)
+		return -EINVAL;
+
 	switch (type) {
 	case VFL_TYPE_GRABBER:
 		base = MINOR_VFL_TYPE_GRABBER_MIN;
@@ -279,7 +284,7 @@ int video_register_device_index(struct video_device *vfd, int type, int nr,
 	default:
 		printk(KERN_ERR "%s called with unknown type: %d\n",
 		       __func__, type);
-		return -1;
+		return -EINVAL;
 	}
 
 	/* pick a minor number */
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index fdfe7739c96..140ef92c19c 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -499,7 +499,7 @@ static void dbgbuf(unsigned int cmd, struct video_device *vfd,
 			p->timestamp.tv_sec / 3600,
 			(int)(p->timestamp.tv_sec / 60) % 60,
 			(int)(p->timestamp.tv_sec % 60),
-			p->timestamp.tv_usec,
+			(long)p->timestamp.tv_usec,
 			p->index,
 			prt_names(p->type, v4l2_type_names),
 			p->bytesused, p->flags,
@@ -674,7 +674,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file,
 	 __video_do_ioctl will be called again, with one or more
 	 V4L2 ioctls.
 	 ********************************************************/
-	if (_IOC_TYPE(cmd) == 'v')
+	if (_IOC_TYPE(cmd) == 'v' && _IOC_NR(cmd) < BASE_VIDIOCPRIVATE)
 		return v4l_compat_translate_ioctl(inode, file, cmd, arg,
 						__video_do_ioctl);
 #endif
diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c
deleted file mode 100644
index e69de29bb2d..00000000000
--- a/drivers/media/video/videodev.c
+++ /dev/null
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 3989b0eded2..1edda456fc6 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -39,7 +39,9 @@
 #include <linux/i2c-algo-sgi.h>
 
 #include <linux/videodev2.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/video_decoder.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 3518af071a2..8ba8daafd7e 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -1021,13 +1021,13 @@ static int vivi_release(void)
 		dev = list_entry(list, struct vivi_dev, vivi_devlist);
 
 		if (-1 != dev->vfd->minor) {
-			video_unregister_device(dev->vfd);
-			printk(KERN_INFO "%s: /dev/video%d unregistered.\n",
+			printk(KERN_INFO "%s: unregistering /dev/video%d\n",
 				VIVI_MODULE_NAME, dev->vfd->minor);
+			video_unregister_device(dev->vfd);
 		} else {
-			video_device_release(dev->vfd);
-			printk(KERN_INFO "%s: /dev/video%d released.\n",
+			printk(KERN_INFO "%s: releasing /dev/video%d\n",
 				VIVI_MODULE_NAME, dev->vfd->minor);
+			video_device_release(dev->vfd);
 		}
 
 		kfree(dev);
@@ -1104,19 +1104,29 @@ static struct video_device vivi_template = {
 	Initialization and module stuff
    ------------------------------------------------------------------*/
 
+/* This routine allocates from 1 to n_devs virtual drivers.
+
+   The real maximum number of virtual drivers will depend on how many drivers
+   will succeed. This is limited to the maximum number of devices that
+   videodev supports. Since there are 64 minors for video grabbers, this is
+   currently the theoretical maximum limit. However, a further limit does
+   exist at videodev that forbids any driver to register more than 32 video
+   grabbers.
+ */
 static int __init vivi_init(void)
 {
 	int ret = -ENOMEM, i;
 	struct vivi_dev *dev;
 	struct video_device *vfd;
 
+	if (n_devs <= 0)
+		n_devs = 1;
+
 	for (i = 0; i < n_devs; i++) {
 		dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-		if (NULL == dev)
+		if (!dev)
 			break;
 
-		list_add_tail(&dev->vivi_devlist, &vivi_devlist);
-
 		/* init video dma queues */
 		INIT_LIST_HEAD(&dev->vidq.active);
 		init_waitqueue_head(&dev->vidq.wq);
@@ -1126,14 +1136,27 @@ static int __init vivi_init(void)
 		mutex_init(&dev->mutex);
 
 		vfd = video_device_alloc();
-		if (NULL == vfd)
+		if (!vfd) {
+			kfree(dev);
 			break;
+		}
 
 		*vfd = vivi_template;
 
 		ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
-		if (ret < 0)
+		if (ret < 0) {
+			video_device_release(vfd);
+			kfree(dev);
+
+			/* If some registers succeeded, keep driver */
+			if (i)
+				ret = 0;
+
 			break;
+		}
+
+		/* Now that everything is fine, let's add it to device list */
+		list_add_tail(&dev->vivi_devlist, &vivi_devlist);
 
 		snprintf(vfd->name, sizeof(vfd->name), "%s (%i)",
 			 vivi_template.name, vfd->minor);
@@ -1149,11 +1172,16 @@ static int __init vivi_init(void)
 	if (ret < 0) {
 		vivi_release();
 		printk(KERN_INFO "Error %d while loading vivi driver\n", ret);
-	} else
+	} else {
 		printk(KERN_INFO "Video Technology Magazine Virtual Video "
 			"Capture Board ver %u.%u.%u successfully loaded.\n",
 			(VIVI_VERSION >> 16) & 0xFF, (VIVI_VERSION >> 8) & 0xFF,
 			VIVI_VERSION & 0xFF);
+
+		/* n_devs will reflect the actual number of allocated devices */
+		n_devs = i;
+	}
+
 	return ret;
 }
 
@@ -1169,10 +1197,10 @@ MODULE_DESCRIPTION("Video Technology Magazine Virtual Video Capture Board");
 MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol");
 MODULE_LICENSE("Dual BSD/GPL");
 
-module_param(video_nr, int, 0);
+module_param(video_nr, uint, 0444);
 MODULE_PARM_DESC(video_nr, "video iminor start number");
 
-module_param(n_devs, int, 0);
+module_param(n_devs, uint, 0444);
 MODULE_PARM_DESC(n_devs, "number of video devices to create");
 
 module_param_named(debug, vivi_template.debug, int, 0444);
diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c
index 9402f40095b..2ff00bc5ad6 100644
--- a/drivers/media/video/w9966.c
+++ b/drivers/media/video/w9966.c
@@ -334,7 +334,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port)
 	memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device));
 	cam->vdev.priv = cam;
 
-	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1)
+	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0)
 		return -1;
 
 	w9966_setState(cam, W9966_STATE_VDEV, W9966_STATE_VDEV);
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index 550ce7bd5c8..0c3287734c9 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -1988,6 +1988,7 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	cam->v4ldev->fops = &zc0301_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
+	cam->v4ldev->parent = &udev->dev;
 	video_set_drvdata(cam->v4ldev, cam);
 
 	init_completion(&cam->probe);
diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h
index 70fe6fc6cdd..b0cd49c438a 100644
--- a/drivers/media/video/zc0301/zc0301_sensor.h
+++ b/drivers/media/video/zc0301/zc0301_sensor.h
@@ -60,27 +60,8 @@ zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor);
 
 #define ZC0301_ID_TABLE                                                       \
 static const struct usb_device_id zc0301_id_table[] =  {                      \
-	{ ZC0301_USB_DEVICE(0x041e, 0x4017, 0xff), }, /* ICM105 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x401c, 0xff), }, /* PAS106 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x401e, 0xff), }, /* HV7131 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x401f, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x041e, 0x4022, 0xff), },                         \
-	{ ZC0301_USB_DEVICE(0x041e, 0x4034, 0xff), }, /* PAS106 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x4035, 0xff), }, /* PAS106 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x4036, 0xff), }, /* HV7131 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x403a, 0xff), }, /* HV7131 */            \
-	{ ZC0301_USB_DEVICE(0x0458, 0x7007, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x0458, 0x700c, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x0458, 0x700f, 0xff), }, /* TAS5130 */           \
 	{ ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */            \
-	{ ZC0301_USB_DEVICE(0x055f, 0xd003, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x055f, 0xd004, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x0ac8, 0x0301, 0xff), },                         \
-	{ ZC0301_USB_DEVICE(0x0ac8, 0x301b, 0xff), }, /* PB-0330/HV7131 */    \
 	{ ZC0301_USB_DEVICE(0x0ac8, 0x303b, 0xff), }, /* PB-0330 */           \
-	{ ZC0301_USB_DEVICE(0x10fd, 0x0128, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x10fd, 0x8050, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x10fd, 0x804e, 0xff), }, /* TAS5130 */           \
 	{ }                                                                   \
 };
 
diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index a38005008a2..cea46906408 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -185,7 +185,7 @@ static void memstick_free(struct device *dev)
 }
 
 static struct class memstick_host_class = {
-	.name       = "memstick_host",
+	.name        = "memstick_host",
 	.dev_release = memstick_free
 };
 
@@ -264,7 +264,7 @@ EXPORT_SYMBOL(memstick_new_req);
  * @sg - TPC argument
  */
 void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
-			  struct scatterlist *sg)
+			  const struct scatterlist *sg)
 {
 	mrq->tpc = tpc;
 	if (tpc & 8)
@@ -294,7 +294,7 @@ EXPORT_SYMBOL(memstick_init_req_sg);
  * user supplied buffer.
  */
 void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
-		       void *buf, size_t length)
+		       const void *buf, size_t length)
 {
 	mrq->tpc = tpc;
 	if (tpc & 8)
@@ -439,7 +439,7 @@ static void memstick_check(struct work_struct *work)
 	if (!host->card) {
 		if (memstick_power_on(host))
 			goto out_power_off;
-	} else
+	} else if (host->card->stop)
 		host->card->stop(host->card);
 
 	card = memstick_alloc_card(host);
@@ -458,7 +458,7 @@ static void memstick_check(struct work_struct *work)
 			    || !(host->card->check(host->card))) {
 				device_unregister(&host->card->dev);
 				host->card = NULL;
-			} else
+			} else if (host->card->start)
 				host->card->start(host->card);
 		}
 
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 44b1817f2f2..d2d2318dafa 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -30,6 +30,8 @@ module_param(major, int, 0644);
 #define MSPRO_BLOCK_SIGNATURE        0xa5c3
 #define MSPRO_BLOCK_MAX_ATTRIBUTES   41
 
+#define MSPRO_BLOCK_PART_SHIFT 3
+
 enum {
 	MSPRO_BLOCK_ID_SYSINFO         = 0x10,
 	MSPRO_BLOCK_ID_MODELNAME       = 0x15,
@@ -195,7 +197,7 @@ static int mspro_block_bd_open(struct inode *inode, struct file *filp)
 static int mspro_block_disk_release(struct gendisk *disk)
 {
 	struct mspro_block_data *msb = disk->private_data;
-	int disk_id = disk->first_minor >> MEMSTICK_PART_SHIFT;
+	int disk_id = disk->first_minor >> MSPRO_BLOCK_PART_SHIFT;
 
 	mutex_lock(&mspro_block_disk_lock);
 
@@ -877,6 +879,7 @@ static int mspro_block_switch_interface(struct memstick_dev *card)
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
 	int rc = 0;
 
+try_again:
 	if (msb->caps & MEMSTICK_CAP_PAR4)
 		rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4);
 	else
@@ -930,6 +933,18 @@ static int mspro_block_switch_interface(struct memstick_dev *card)
 		rc = memstick_set_rw_addr(card);
 		if (!rc)
 			rc = mspro_block_set_interface(card, msb->system);
+
+		if (!rc) {
+			msleep(150);
+			rc = mspro_block_wait_for_ced(card);
+			if (rc)
+				return rc;
+
+			if (msb->caps & MEMSTICK_CAP_PAR8) {
+				msb->caps &= ~MEMSTICK_CAP_PAR8;
+				goto try_again;
+			}
+		}
 	}
 	return rc;
 }
@@ -1117,14 +1132,16 @@ static int mspro_block_init_card(struct memstick_dev *card)
 		return -EIO;
 
 	msb->caps = host->caps;
-	rc = mspro_block_switch_interface(card);
+
+	msleep(150);
+	rc = mspro_block_wait_for_ced(card);
 	if (rc)
 		return rc;
 
-	msleep(200);
-	rc = mspro_block_wait_for_ced(card);
+	rc = mspro_block_switch_interface(card);
 	if (rc)
 		return rc;
+
 	dev_dbg(&card->dev, "card activated\n");
 	if (msb->system != MEMSTICK_SYS_SERIAL)
 		msb->caps |= MEMSTICK_CAP_AUTO_GET_INT;
@@ -1192,12 +1209,12 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 	if (rc)
 		return rc;
 
-	if ((disk_id << MEMSTICK_PART_SHIFT) > 255) {
+	if ((disk_id << MSPRO_BLOCK_PART_SHIFT) > 255) {
 		rc = -ENOSPC;
 		goto out_release_id;
 	}
 
-	msb->disk = alloc_disk(1 << MEMSTICK_PART_SHIFT);
+	msb->disk = alloc_disk(1 << MSPRO_BLOCK_PART_SHIFT);
 	if (!msb->disk) {
 		rc = -ENOMEM;
 		goto out_release_id;
@@ -1220,7 +1237,7 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 				   MSPRO_BLOCK_MAX_PAGES * msb->page_size);
 
 	msb->disk->major = major;
-	msb->disk->first_minor = disk_id << MEMSTICK_PART_SHIFT;
+	msb->disk->first_minor = disk_id << MSPRO_BLOCK_PART_SHIFT;
 	msb->disk->fops = &ms_block_bdops;
 	msb->usage_count = 1;
 	msb->disk->private_data = msb;
@@ -1416,7 +1433,7 @@ out_unlock:
 
 static struct memstick_device_id mspro_block_id_tbl[] = {
 	{MEMSTICK_MATCH_ALL, MEMSTICK_TYPE_PRO, MEMSTICK_CATEGORY_STORAGE_DUO,
-	 MEMSTICK_CLASS_GENERIC_DUO},
+	 MEMSTICK_CLASS_DUO},
 	{}
 };
 
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index 3485c63d20b..2fb95a5b72e 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -81,6 +81,8 @@ struct jmb38x_ms {
 #define TPC_CODE_SZ_MASK       0x00000700
 #define TPC_DATA_SZ_MASK       0x00000007
 
+#define HOST_CONTROL_TDELAY_EN 0x00040000
+#define HOST_CONTROL_HW_OC_P   0x00010000
 #define HOST_CONTROL_RESET_REQ 0x00008000
 #define HOST_CONTROL_REI       0x00004000
 #define HOST_CONTROL_LED       0x00000400
@@ -88,6 +90,7 @@ struct jmb38x_ms {
 #define HOST_CONTROL_RESET     0x00000100
 #define HOST_CONTROL_POWER_EN  0x00000080
 #define HOST_CONTROL_CLOCK_EN  0x00000040
+#define HOST_CONTROL_REO       0x00000008
 #define HOST_CONTROL_IF_SHIFT  4
 
 #define HOST_CONTROL_IF_SERIAL 0x0
@@ -133,11 +136,15 @@ struct jmb38x_ms {
 #define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
 
 #define CLOCK_CONTROL_40MHZ   0x00000001
-#define CLOCK_CONTROL_50MHZ   0x00000002
+#define CLOCK_CONTROL_50MHZ   0x0000000a
 #define CLOCK_CONTROL_60MHZ   0x00000008
 #define CLOCK_CONTROL_62_5MHZ 0x0000000c
 #define CLOCK_CONTROL_OFF     0x00000000
 
+#define PCI_CTL_CLOCK_DLY_ADDR   0x000000b0
+#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
+#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
+
 enum {
 	CMD_READY    = 0x01,
 	FIFO_READY   = 0x02,
@@ -367,8 +374,7 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh)
 		return host->req->error;
 	}
 
-	dev_dbg(&msh->dev, "control %08x\n",
-		readl(host->addr + HOST_CONTROL));
+	dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL));
 	dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS));
 	dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS));
 
@@ -637,7 +643,7 @@ static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
 		ndelay(20);
 	}
 	dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
-	return -EIO;
+	/* return -EIO; */
 
 reset_next:
 	writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
@@ -680,7 +686,9 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
 
 			host_ctl = 7;
 			host_ctl |= HOST_CONTROL_POWER_EN
-				 | HOST_CONTROL_CLOCK_EN;
+				    | HOST_CONTROL_CLOCK_EN
+				    | HOST_CONTROL_HW_OC_P
+				    | HOST_CONTROL_TDELAY_EN;
 			writel(host_ctl, host->addr + HOST_CONTROL);
 
 			writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
@@ -704,33 +712,40 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
 		break;
 	case MEMSTICK_INTERFACE:
 		host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
+		pci_read_config_dword(host->chip->pdev,
+				      PCI_CTL_CLOCK_DLY_ADDR,
+				      &clock_delay);
+		clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
+					: ~PCI_CTL_CLOCK_DLY_MASK_A;
 
 		if (value == MEMSTICK_SERIAL) {
 			host_ctl &= ~HOST_CONTROL_FAST_CLK;
+			host_ctl &= ~HOST_CONTROL_REO;
 			host_ctl |= HOST_CONTROL_IF_SERIAL
 				    << HOST_CONTROL_IF_SHIFT;
 			host_ctl |= HOST_CONTROL_REI;
 			clock_ctl = CLOCK_CONTROL_40MHZ;
-			clock_delay = 0;
 		} else if (value == MEMSTICK_PAR4) {
-			host_ctl |= HOST_CONTROL_FAST_CLK;
+			host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
 			host_ctl |= HOST_CONTROL_IF_PAR4
 				    << HOST_CONTROL_IF_SHIFT;
 			host_ctl &= ~HOST_CONTROL_REI;
 			clock_ctl = CLOCK_CONTROL_40MHZ;
-			clock_delay = 4;
+			clock_delay |= host->id ? (4 << 12) : (4 << 8);
 		} else if (value == MEMSTICK_PAR8) {
 			host_ctl |= HOST_CONTROL_FAST_CLK;
 			host_ctl |= HOST_CONTROL_IF_PAR8
 				    << HOST_CONTROL_IF_SHIFT;
-			host_ctl &= ~HOST_CONTROL_REI;
-			clock_ctl = CLOCK_CONTROL_60MHZ;
-			clock_delay = 0;
+			host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
+			clock_ctl = CLOCK_CONTROL_50MHZ;
 		} else
 			return -EINVAL;
+
 		writel(host_ctl, host->addr + HOST_CONTROL);
 		writel(clock_ctl, host->addr + CLOCK_CONTROL);
-		writel(clock_delay, host->addr + CLOCK_DELAY);
+		pci_write_config_dword(host->chip->pdev,
+				       PCI_CTL_CLOCK_DLY_ADDR,
+				       clock_delay);
 		break;
 	};
 	return 0;
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 883e7ea31de..10c44d3fe01 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -50,10 +50,31 @@ config HTC_PASIC3
 	  HTC Magician devices, respectively. Actual functionality is
 	  handled by the leds-pasic3 and ds1wm drivers.
 
+config MFD_TMIO
+	bool
+	default n
+
+config MFD_T7L66XB
+	bool "Support Toshiba T7L66XB"
+	depends on ARM
+	select MFD_CORE
+	select MFD_TMIO
+	help
+	  Support for Toshiba Mobile IO Controller T7L66XB
+
+config MFD_TC6387XB
+	bool "Support Toshiba TC6387XB"
+	depends on ARM
+	select MFD_CORE
+	select MFD_TMIO
+	help
+	  Support for Toshiba Mobile IO Controller TC6387XB
+
 config MFD_TC6393XB
 	bool "Support Toshiba TC6393XB"
 	depends on GPIOLIB && ARM
 	select MFD_CORE
+	select MFD_TMIO
 	help
 	  Support for Toshiba Mobile IO Controller TC6393XB
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 33daa2f45dd..03ad239ecef 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -8,6 +8,8 @@ obj-$(CONFIG_MFD_ASIC3)		+= asic3.o
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 
+obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o
+obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index c6408a62d95..bc2a807f210 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -16,7 +16,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index b5272b5ce3f..28380b20bc7 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -21,12 +21,12 @@
 #include <linux/platform_device.h>
 
 #include <asm/dma.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "mcp.h"
 
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
new file mode 100644
index 00000000000..49a0fffc02a
--- /dev/null
+++ b/drivers/mfd/t7l66xb.c
@@ -0,0 +1,419 @@
+/*
+ *
+ * Toshiba T7L66XB core mfd support
+ *
+ * Copyright (c) 2005, 2007, 2008 Ian Molton
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * T7L66 features:
+ *
+ * Supported in this driver:
+ * SD/MMC
+ * SM/NAND flash controller
+ *
+ * As yet not supported
+ * GPIO interface (on NAND pins)
+ * Serial interface
+ * TFT 'interface converter'
+ * PCMCIA interface logic
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mfd/t7l66xb.h>
+
+enum {
+	T7L66XB_CELL_NAND,
+	T7L66XB_CELL_MMC,
+};
+
+#define SCR_REVID	0x08		/* b Revision ID	*/
+#define SCR_IMR		0x42		/* b Interrupt Mask	*/
+#define SCR_DEV_CTL	0xe0		/* b Device control	*/
+#define SCR_ISR		0xe1		/* b Interrupt Status	*/
+#define SCR_GPO_OC	0xf0		/* b GPO output control	*/
+#define SCR_GPO_OS	0xf1		/* b GPO output enable	*/
+#define SCR_GPI_S	0xf2		/* w GPI status		*/
+#define SCR_APDC	0xf8		/* b Active pullup down ctrl */
+
+#define SCR_DEV_CTL_USB		BIT(0)	/* USB enable		*/
+#define SCR_DEV_CTL_MMC		BIT(1)	/* MMC enable		*/
+
+/*--------------------------------------------------------------------------*/
+
+struct t7l66xb {
+	void __iomem		*scr;
+	/* Lock to protect registers requiring read/modify/write ops. */
+	spinlock_t		lock;
+
+	struct resource		rscr;
+	int			irq;
+	int			irq_base;
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int t7l66xb_mmc_enable(struct platform_device *mmc)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct t7l66xb_platform_data   *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned long flags;
+	u8 dev_ctl;
+
+	if (pdata->enable_clk32k)
+		pdata->enable_clk32k(dev);
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+
+	dev_ctl = tmio_ioread8(t7l66xb->scr + SCR_DEV_CTL);
+	dev_ctl |= SCR_DEV_CTL_MMC;
+	tmio_iowrite8(dev_ctl, t7l66xb->scr + SCR_DEV_CTL);
+
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+
+	return 0;
+}
+
+static int t7l66xb_mmc_disable(struct platform_device *mmc)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct t7l66xb_platform_data   *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned long flags;
+	u8 dev_ctl;
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+
+	dev_ctl = tmio_ioread8(t7l66xb->scr + SCR_DEV_CTL);
+	dev_ctl &= ~SCR_DEV_CTL_MMC;
+	tmio_iowrite8(dev_ctl, t7l66xb->scr + SCR_DEV_CTL);
+
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+
+	if (pdata->disable_clk32k)
+		pdata->disable_clk32k(dev);
+
+	return 0;
+}
+
+/*--------------------------------------------------------------------------*/
+
+const static struct resource t7l66xb_mmc_resources[] = {
+	{
+		.start = 0x800,
+		.end	= 0x9ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x200,
+		.end	= 0x2ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_T7L66XB_MMC,
+		.end	= IRQ_T7L66XB_MMC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+const static struct resource t7l66xb_nand_resources[] = {
+	{
+		.start	= 0xc00,
+		.end	= 0xc07,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x0100,
+		.end	= 0x01ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_T7L66XB_NAND,
+		.end	= IRQ_T7L66XB_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell t7l66xb_cells[] = {
+	[T7L66XB_CELL_MMC] = {
+		.name = "tmio-mmc",
+		.enable = t7l66xb_mmc_enable,
+		.disable = t7l66xb_mmc_disable,
+		.num_resources = ARRAY_SIZE(t7l66xb_mmc_resources),
+		.resources = t7l66xb_mmc_resources,
+	},
+	[T7L66XB_CELL_NAND] = {
+		.name = "tmio-nand",
+		.num_resources = ARRAY_SIZE(t7l66xb_nand_resources),
+		.resources = t7l66xb_nand_resources,
+	},
+};
+
+/*--------------------------------------------------------------------------*/
+
+/* Handle the T7L66XB interrupt mux */
+static void t7l66xb_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct t7l66xb *t7l66xb = get_irq_data(irq);
+	unsigned int isr;
+	unsigned int i, irq_base;
+
+	irq_base = t7l66xb->irq_base;
+
+	while ((isr = tmio_ioread8(t7l66xb->scr + SCR_ISR) &
+				~tmio_ioread8(t7l66xb->scr + SCR_IMR)))
+		for (i = 0; i < T7L66XB_NR_IRQS; i++)
+			if (isr & (1 << i))
+				generic_handle_irq(irq_base + i);
+}
+
+static void t7l66xb_irq_mask(unsigned int irq)
+{
+	struct t7l66xb *t7l66xb = get_irq_chip_data(irq);
+	unsigned long			flags;
+	u8 imr;
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+	imr = tmio_ioread8(t7l66xb->scr + SCR_IMR);
+	imr |= 1 << (irq - t7l66xb->irq_base);
+	tmio_iowrite8(imr, t7l66xb->scr + SCR_IMR);
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+}
+
+static void t7l66xb_irq_unmask(unsigned int irq)
+{
+	struct t7l66xb *t7l66xb = get_irq_chip_data(irq);
+	unsigned long flags;
+	u8 imr;
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+	imr = tmio_ioread8(t7l66xb->scr + SCR_IMR);
+	imr &= ~(1 << (irq - t7l66xb->irq_base));
+	tmio_iowrite8(imr, t7l66xb->scr + SCR_IMR);
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+}
+
+static struct irq_chip t7l66xb_chip = {
+	.name	= "t7l66xb",
+	.ack	= t7l66xb_irq_mask,
+	.mask	= t7l66xb_irq_mask,
+	.unmask	= t7l66xb_irq_unmask,
+};
+
+/*--------------------------------------------------------------------------*/
+
+/* Install the IRQ handler */
+static void t7l66xb_attach_irq(struct platform_device *dev)
+{
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned int irq, irq_base;
+
+	irq_base = t7l66xb->irq_base;
+
+	for (irq = irq_base; irq < irq_base + T7L66XB_NR_IRQS; irq++) {
+		set_irq_chip(irq, &t7l66xb_chip);
+		set_irq_chip_data(irq, t7l66xb);
+		set_irq_handler(irq, handle_level_irq);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+#endif
+	}
+
+	set_irq_type(t7l66xb->irq, IRQ_TYPE_EDGE_FALLING);
+	set_irq_data(t7l66xb->irq, t7l66xb);
+	set_irq_chained_handler(t7l66xb->irq, t7l66xb_irq);
+}
+
+static void t7l66xb_detach_irq(struct platform_device *dev)
+{
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned int irq, irq_base;
+
+	irq_base = t7l66xb->irq_base;
+
+	set_irq_chained_handler(t7l66xb->irq, NULL);
+	set_irq_data(t7l66xb->irq, NULL);
+
+	for (irq = irq_base; irq < irq_base + T7L66XB_NR_IRQS; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip(irq, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+static int t7l66xb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+
+	if (pdata && pdata->suspend)
+		pdata->suspend(dev);
+
+	return 0;
+}
+
+static int t7l66xb_resume(struct platform_device *dev)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+
+	if (pdata && pdata->resume)
+		pdata->resume(dev);
+
+	return 0;
+}
+#else
+#define t7l66xb_suspend NULL
+#define t7l66xb_resume	NULL
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static int t7l66xb_probe(struct platform_device *dev)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb;
+	struct resource *iomem, *rscr;
+	int ret;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem)
+		return -EINVAL;
+
+	t7l66xb = kzalloc(sizeof *t7l66xb, GFP_KERNEL);
+	if (!t7l66xb)
+		return -ENOMEM;
+
+	spin_lock_init(&t7l66xb->lock);
+
+	platform_set_drvdata(dev, t7l66xb);
+
+	ret = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		t7l66xb->irq = ret;
+	else
+		goto err_noirq;
+
+	t7l66xb->irq_base = pdata->irq_base;
+
+	rscr = &t7l66xb->rscr;
+	rscr->name = "t7l66xb-core";
+	rscr->start = iomem->start;
+	rscr->end = iomem->start + 0xff;
+	rscr->flags = IORESOURCE_MEM;
+
+	ret = request_resource(iomem, rscr);
+	if (ret)
+		goto err_request_scr;
+
+	t7l66xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+	if (!t7l66xb->scr) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	if (pdata && pdata->enable)
+		pdata->enable(dev);
+
+	/* Mask all interrupts */
+	tmio_iowrite8(0xbf, t7l66xb->scr + SCR_IMR);
+
+	printk(KERN_INFO "%s rev %d @ 0x%08lx, irq %d\n",
+		dev->name, tmio_ioread8(t7l66xb->scr + SCR_REVID),
+		(unsigned long)iomem->start, t7l66xb->irq);
+
+	t7l66xb_attach_irq(dev);
+
+	t7l66xb_cells[T7L66XB_CELL_NAND].driver_data = pdata->nand_data;
+	t7l66xb_cells[T7L66XB_CELL_NAND].platform_data =
+		&t7l66xb_cells[T7L66XB_CELL_NAND];
+	t7l66xb_cells[T7L66XB_CELL_NAND].data_size =
+		sizeof(t7l66xb_cells[T7L66XB_CELL_NAND]);
+
+	t7l66xb_cells[T7L66XB_CELL_MMC].platform_data =
+		&t7l66xb_cells[T7L66XB_CELL_MMC];
+	t7l66xb_cells[T7L66XB_CELL_MMC].data_size =
+		sizeof(t7l66xb_cells[T7L66XB_CELL_MMC]);
+
+	ret = mfd_add_devices(&dev->dev, dev->id,
+			      t7l66xb_cells, ARRAY_SIZE(t7l66xb_cells),
+			      iomem, t7l66xb->irq_base);
+
+	if (!ret)
+		return 0;
+
+	t7l66xb_detach_irq(dev);
+	iounmap(t7l66xb->scr);
+err_ioremap:
+	release_resource(&t7l66xb->rscr);
+err_noirq:
+err_request_scr:
+	kfree(t7l66xb);
+	return ret;
+}
+
+static int t7l66xb_remove(struct platform_device *dev)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	int ret;
+
+	ret = pdata->disable(dev);
+
+	t7l66xb_detach_irq(dev);
+	iounmap(t7l66xb->scr);
+	release_resource(&t7l66xb->rscr);
+	mfd_remove_devices(&dev->dev);
+	platform_set_drvdata(dev, NULL);
+	kfree(t7l66xb);
+
+	return ret;
+
+}
+
+static struct platform_driver t7l66xb_platform_driver = {
+	.driver = {
+		.name	= "t7l66xb",
+		.owner	= THIS_MODULE,
+	},
+	.suspend	= t7l66xb_suspend,
+	.resume		= t7l66xb_resume,
+	.probe		= t7l66xb_probe,
+	.remove		= t7l66xb_remove,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int __init t7l66xb_init(void)
+{
+	int retval = 0;
+
+	retval = platform_driver_register(&t7l66xb_platform_driver);
+	return retval;
+}
+
+static void __exit t7l66xb_exit(void)
+{
+	platform_driver_unregister(&t7l66xb_platform_driver);
+}
+
+module_init(t7l66xb_init);
+module_exit(t7l66xb_exit);
+
+MODULE_DESCRIPTION("Toshiba T7L66XB core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton");
+MODULE_ALIAS("platform:t7l66xb");
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
new file mode 100644
index 00000000000..a22b21ac6cf
--- /dev/null
+++ b/drivers/mfd/tc6387xb.c
@@ -0,0 +1,181 @@
+/*
+ * Toshiba TC6387XB support
+ * Copyright (c) 2005 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains TC6387XB base support.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mfd/tc6387xb.h>
+
+enum {
+	TC6387XB_CELL_MMC,
+};
+
+#ifdef CONFIG_PM
+static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev);
+
+	if (pdata && pdata->suspend)
+		pdata->suspend(dev);
+
+	return 0;
+}
+
+static int tc6387xb_resume(struct platform_device *dev)
+{
+	struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev);
+
+	if (pdata && pdata->resume)
+		pdata->resume(dev);
+
+	return 0;
+}
+#else
+#define tc6387xb_suspend  NULL
+#define tc6387xb_resume   NULL
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static int tc6387xb_mmc_enable(struct platform_device *mmc)
+{
+	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
+	struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data;
+
+	if (tc6387xb->enable_clk32k)
+		tc6387xb->enable_clk32k(dev);
+
+	return 0;
+}
+
+static int tc6387xb_mmc_disable(struct platform_device *mmc)
+{
+	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
+	struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data;
+
+	if (tc6387xb->disable_clk32k)
+		tc6387xb->disable_clk32k(dev);
+
+	return 0;
+}
+
+/*--------------------------------------------------------------------------*/
+
+static struct resource tc6387xb_mmc_resources[] = {
+	{
+		.start = 0x800,
+		.end   = 0x9ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x200,
+		.end   = 0x2ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0,
+		.end   = 0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell tc6387xb_cells[] = {
+	[TC6387XB_CELL_MMC] = {
+		.name = "tmio-mmc",
+		.enable = tc6387xb_mmc_enable,
+		.disable = tc6387xb_mmc_disable,
+		.num_resources = ARRAY_SIZE(tc6387xb_mmc_resources),
+		.resources = tc6387xb_mmc_resources,
+	},
+};
+
+static int tc6387xb_probe(struct platform_device *dev)
+{
+	struct tc6387xb_platform_data *data = platform_get_drvdata(dev);
+	struct resource *iomem;
+	int irq, ret;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		ret = -EINVAL;
+		goto err_resource;
+	}
+
+	ret  = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		irq = ret;
+	else
+		goto err_resource;
+
+	if (data && data->enable)
+		data->enable(dev);
+
+	printk(KERN_INFO "Toshiba tc6387xb initialised\n");
+
+	tc6387xb_cells[TC6387XB_CELL_MMC].platform_data =
+		&tc6387xb_cells[TC6387XB_CELL_MMC];
+	tc6387xb_cells[TC6387XB_CELL_MMC].data_size =
+		sizeof(tc6387xb_cells[TC6387XB_CELL_MMC]);
+
+	ret = mfd_add_devices(&dev->dev, dev->id, tc6387xb_cells,
+			      ARRAY_SIZE(tc6387xb_cells), iomem, irq);
+
+	if (!ret)
+		return 0;
+
+err_resource:
+	return ret;
+}
+
+static int tc6387xb_remove(struct platform_device *dev)
+{
+	struct tc6387xb_platform_data *data = platform_get_drvdata(dev);
+
+	if (data && data->disable)
+		data->disable(dev);
+
+	/* FIXME - free the resources! */
+
+	return 0;
+}
+
+
+static struct platform_driver tc6387xb_platform_driver = {
+	.driver = {
+		.name		= "tc6387xb",
+	},
+	.probe		= tc6387xb_probe,
+	.remove		= tc6387xb_remove,
+	.suspend        = tc6387xb_suspend,
+	.resume         = tc6387xb_resume,
+};
+
+
+static int __init tc6387xb_init(void)
+{
+	return platform_driver_register(&tc6387xb_platform_driver);
+}
+
+static void __exit tc6387xb_exit(void)
+{
+	platform_driver_unregister(&tc6387xb_platform_driver);
+}
+
+module_init(tc6387xb_init);
+module_exit(tc6387xb_exit);
+
+MODULE_DESCRIPTION("Toshiba TC6387XB core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton");
+MODULE_ALIAS("platform:tc6387xb");
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index f4fd797c159..e4c1c788b5f 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -19,8 +19,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/fb.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/tmio.h>
 #include <linux/mfd/tc6393xb.h>
@@ -112,6 +112,7 @@ struct tc6393xb {
 
 enum {
 	TC6393XB_CELL_NAND,
+	TC6393XB_CELL_MMC,
 };
 
 /*--------------------------------------------------------------------------*/
@@ -126,7 +127,7 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 
 	/* SMD buffer on */
 	dev_dbg(&dev->dev, "SMD buffer on\n");
-	iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1));
+	tmio_iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1));
 
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 
@@ -135,25 +136,40 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 
 static struct resource __devinitdata tc6393xb_nand_resources[] = {
 	{
-		.name	= TMIO_NAND_CONFIG,
-		.start	= 0x0100,
-		.end	= 0x01ff,
+		.start	= 0x1000,
+		.end	= 0x1007,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= TMIO_NAND_CONTROL,
-		.start	= 0x1000,
-		.end	= 0x1007,
+		.start	= 0x0100,
+		.end	= 0x01ff,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= TMIO_NAND_IRQ,
 		.start	= IRQ_TC6393_NAND,
 		.end	= IRQ_TC6393_NAND,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
+static struct resource __devinitdata tc6393xb_mmc_resources[] = {
+	{
+		.start	= 0x800,
+		.end	= 0x9ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x200,
+		.end	= 0x2ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TC6393_MMC,
+		.end	= IRQ_TC6393_MMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 	[TC6393XB_CELL_NAND] = {
 		.name = "tmio-nand",
@@ -161,6 +177,11 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 		.num_resources = ARRAY_SIZE(tc6393xb_nand_resources),
 		.resources = tc6393xb_nand_resources,
 	},
+	[TC6393XB_CELL_MMC] = {
+		.name = "tmio-mmc",
+		.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
+		.resources = tc6393xb_mmc_resources,
+	},
 };
 
 /*--------------------------------------------------------------------------*/
@@ -171,7 +192,7 @@ static int tc6393xb_gpio_get(struct gpio_chip *chip,
 	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
 
 	/* XXX: does dsr also represent inputs? */
-	return ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
+	return tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
 		& TC_GPIO_BIT(offset);
 }
 
@@ -181,13 +202,13 @@ static void __tc6393xb_gpio_set(struct gpio_chip *chip,
 	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
 	u8  dsr;
 
-	dsr = ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8));
+	dsr = tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8));
 	if (value)
 		dsr |= TC_GPIO_BIT(offset);
 	else
 		dsr &= ~TC_GPIO_BIT(offset);
 
-	iowrite8(dsr, tc6393xb->scr + SCR_GPO_DSR(offset / 8));
+	tmio_iowrite8(dsr, tc6393xb->scr + SCR_GPO_DSR(offset / 8));
 }
 
 static void tc6393xb_gpio_set(struct gpio_chip *chip,
@@ -212,9 +233,9 @@ static int tc6393xb_gpio_direction_input(struct gpio_chip *chip,
 
 	spin_lock_irqsave(&tc6393xb->lock, flags);
 
-	doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	doecr = tmio_ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 	doecr &= ~TC_GPIO_BIT(offset);
-	iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	tmio_iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 
@@ -232,9 +253,9 @@ static int tc6393xb_gpio_direction_output(struct gpio_chip *chip,
 
 	__tc6393xb_gpio_set(chip, offset, value);
 
-	doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	doecr = tmio_ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 	doecr |= TC_GPIO_BIT(offset);
-	iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	tmio_iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 
@@ -265,8 +286,8 @@ tc6393xb_irq(unsigned int irq, struct irq_desc *desc)
 
 	irq_base = tc6393xb->irq_base;
 
-	while ((isr = ioread8(tc6393xb->scr + SCR_ISR) &
-				~ioread8(tc6393xb->scr + SCR_IMR)))
+	while ((isr = tmio_ioread8(tc6393xb->scr + SCR_ISR) &
+				~tmio_ioread8(tc6393xb->scr + SCR_IMR)))
 		for (i = 0; i < TC6393XB_NR_IRQS; i++) {
 			if (isr & (1 << i))
 				generic_handle_irq(irq_base + i);
@@ -284,9 +305,9 @@ static void tc6393xb_irq_mask(unsigned int irq)
 	u8 imr;
 
 	spin_lock_irqsave(&tc6393xb->lock, flags);
-	imr = ioread8(tc6393xb->scr + SCR_IMR);
+	imr = tmio_ioread8(tc6393xb->scr + SCR_IMR);
 	imr |= 1 << (irq - tc6393xb->irq_base);
-	iowrite8(imr, tc6393xb->scr + SCR_IMR);
+	tmio_iowrite8(imr, tc6393xb->scr + SCR_IMR);
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 }
 
@@ -297,9 +318,9 @@ static void tc6393xb_irq_unmask(unsigned int irq)
 	u8 imr;
 
 	spin_lock_irqsave(&tc6393xb->lock, flags);
-	imr = ioread8(tc6393xb->scr + SCR_IMR);
+	imr = tmio_ioread8(tc6393xb->scr + SCR_IMR);
 	imr &= ~(1 << (irq - tc6393xb->irq_base));
-	iowrite8(imr, tc6393xb->scr + SCR_IMR);
+	tmio_iowrite8(imr, tc6393xb->scr + SCR_IMR);
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 }
 
@@ -380,9 +401,8 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 {
 	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
 	struct tc6393xb *tc6393xb;
-	struct resource *iomem;
-	struct resource *rscr;
-	int retval, temp;
+	struct resource *iomem, *rscr;
+	int ret, temp;
 	int i;
 
 	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
@@ -391,20 +411,26 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 
 	tc6393xb = kzalloc(sizeof *tc6393xb, GFP_KERNEL);
 	if (!tc6393xb) {
-		retval = -ENOMEM;
+		ret = -ENOMEM;
 		goto err_kzalloc;
 	}
 
 	spin_lock_init(&tc6393xb->lock);
 
 	platform_set_drvdata(dev, tc6393xb);
+
+	ret = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		tc6393xb->irq = ret;
+	else
+		goto err_noirq;
+
 	tc6393xb->iomem = iomem;
-	tc6393xb->irq = platform_get_irq(dev, 0);
 	tc6393xb->irq_base = tcpd->irq_base;
 
-	tc6393xb->clk = clk_get(&dev->dev, "GPIO27_CLK" /* "CK3P6MI" */);
+	tc6393xb->clk = clk_get(&dev->dev, "CLK_CK3P6MI");
 	if (IS_ERR(tc6393xb->clk)) {
-		retval = PTR_ERR(tc6393xb->clk);
+		ret = PTR_ERR(tc6393xb->clk);
 		goto err_clk_get;
 	}
 
@@ -414,71 +440,73 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 	rscr->end = iomem->start + 0xff;
 	rscr->flags = IORESOURCE_MEM;
 
-	retval = request_resource(iomem, rscr);
-	if (retval)
+	ret = request_resource(iomem, rscr);
+	if (ret)
 		goto err_request_scr;
 
 	tc6393xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
 	if (!tc6393xb->scr) {
-		retval = -ENOMEM;
+		ret = -ENOMEM;
 		goto err_ioremap;
 	}
 
-	retval = clk_enable(tc6393xb->clk);
-	if (retval)
+	ret = clk_enable(tc6393xb->clk);
+	if (ret)
 		goto err_clk_enable;
 
-	retval = tcpd->enable(dev);
-	if (retval)
+	ret = tcpd->enable(dev);
+	if (ret)
 		goto err_enable;
 
 	tc6393xb->suspend_state.fer = 0;
+
 	for (i = 0; i < 3; i++) {
 		tc6393xb->suspend_state.gpo_dsr[i] =
 			(tcpd->scr_gpo_dsr >> (8 * i)) & 0xff;
 		tc6393xb->suspend_state.gpo_doecr[i] =
 			(tcpd->scr_gpo_doecr >> (8 * i)) & 0xff;
 	}
-	/*
-	 * It may be necessary to change this back to
-	 * platform-dependant code
-	 */
+
 	tc6393xb->suspend_state.ccr = SCR_CCR_UNK1 |
 					SCR_CCR_HCLK_48;
 
-	retval = tc6393xb_hw_init(dev);
-	if (retval)
+	ret = tc6393xb_hw_init(dev);
+	if (ret)
 		goto err_hw_init;
 
 	printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n",
-			ioread8(tc6393xb->scr + SCR_REVID),
+			tmio_ioread8(tc6393xb->scr + SCR_REVID),
 			(unsigned long) iomem->start, tc6393xb->irq);
 
 	tc6393xb->gpio.base = -1;
 
 	if (tcpd->gpio_base >= 0) {
-		retval = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base);
-		if (retval)
+		ret = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base);
+		if (ret)
 			goto err_gpio_add;
 	}
 
-	if (tc6393xb->irq)
-		tc6393xb_attach_irq(dev);
+	tc6393xb_attach_irq(dev);
 
 	tc6393xb_cells[TC6393XB_CELL_NAND].driver_data = tcpd->nand_data;
 	tc6393xb_cells[TC6393XB_CELL_NAND].platform_data =
 		&tc6393xb_cells[TC6393XB_CELL_NAND];
 	tc6393xb_cells[TC6393XB_CELL_NAND].data_size =
 		sizeof(tc6393xb_cells[TC6393XB_CELL_NAND]);
+	tc6393xb_cells[TC6393XB_CELL_MMC].platform_data =
+		&tc6393xb_cells[TC6393XB_CELL_MMC];
+	tc6393xb_cells[TC6393XB_CELL_MMC].data_size =
+		sizeof(tc6393xb_cells[TC6393XB_CELL_MMC]);
+
 
-	retval = mfd_add_devices(&dev->dev, dev->id,
+	ret = mfd_add_devices(&dev->dev, dev->id,
 			tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
 			iomem, tcpd->irq_base);
 
-	return 0;
+	if (!ret)
+		return 0;
 
-	if (tc6393xb->irq)
-		tc6393xb_detach_irq(dev);
+	tc6393xb_detach_irq(dev);
 
 err_gpio_add:
 	if (tc6393xb->gpio.base != -1)
@@ -493,10 +521,11 @@ err_ioremap:
 	release_resource(&tc6393xb->rscr);
 err_request_scr:
 	clk_put(tc6393xb->clk);
+err_noirq:
 err_clk_get:
 	kfree(tc6393xb);
 err_kzalloc:
-	return retval;
+	return ret;
 }
 
 static int __devexit tc6393xb_remove(struct platform_device *dev)
@@ -506,9 +535,7 @@ static int __devexit tc6393xb_remove(struct platform_device *dev)
 	int ret;
 
 	mfd_remove_devices(&dev->dev);
-
-	if (tc6393xb->irq)
-		tc6393xb_detach_irq(dev);
+	tc6393xb_detach_irq(dev);
 
 	if (tc6393xb->gpio.base != -1) {
 		ret = gpiochip_remove(&tc6393xb->gpio);
@@ -519,17 +546,11 @@ static int __devexit tc6393xb_remove(struct platform_device *dev)
 	}
 
 	ret = tcpd->disable(dev);
-
 	clk_disable(tc6393xb->clk);
-
 	iounmap(tc6393xb->scr);
-
 	release_resource(&tc6393xb->rscr);
-
 	platform_set_drvdata(dev, NULL);
-
 	clk_put(tc6393xb->clk);
-
 	kfree(tc6393xb);
 
 	return ret;
@@ -540,8 +561,7 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
 	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
-	int i;
-
+	int i, ret;
 
 	tc6393xb->suspend_state.ccr = ioread16(tc6393xb->scr + SCR_CCR);
 	tc6393xb->suspend_state.fer = ioread8(tc6393xb->scr + SCR_FER);
@@ -554,14 +574,21 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
 		tc6393xb->suspend_state.gpi_bcr[i] =
 			ioread8(tc6393xb->scr + SCR_GPI_BCR(i));
 	}
+	ret = tcpd->suspend(dev);
+	clk_disable(tc6393xb->clk);
 
-	return tcpd->suspend(dev);
+	return ret;
 }
 
 static int tc6393xb_resume(struct platform_device *dev)
 {
 	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
-	int ret = tcpd->resume(dev);
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	int ret;
+
+	clk_enable(tc6393xb->clk);
+
+	ret = tcpd->resume(dev);
 
 	if (ret)
 		return ret;
@@ -598,7 +625,7 @@ static void __exit tc6393xb_exit(void)
 subsys_initcall(tc6393xb_init);
 module_exit(tc6393xb_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer");
 MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller");
 MODULE_ALIAS("platform:tc6393xb");
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index f6b10dda31f..a316f1b7593 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -26,7 +26,7 @@
 #include <linux/mutex.h>
 
 #include <asm/dma.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "ucb1x00.h"
 
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index ad34e2d2252..44762ca86a8 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -32,7 +32,7 @@
 #include <linux/kthread.h>
 
 #include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 #include <asm/mach-types.h>
 
 #include "ucb1x00.h"
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f5ade1904aa..a726f3b01a6 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -426,9 +426,11 @@ config ENCLOSURE_SERVICES
 
 config SGI_XP
 	tristate "Support communication between SGI SSIs"
-	depends on IA64_GENERIC || IA64_SGI_SN2
+	depends on NET
+	depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP
 	select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 	select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
+	select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP
 	---help---
 	  An SGI machine can be divided into multiple Single System
 	  Images which act independently of each other and have
@@ -450,4 +452,27 @@ config HP_ILO
 	  To compile this driver as a module, choose M here: the
 	  module will be called hpilo.
 
+config SGI_GRU
+	tristate "SGI GRU driver"
+	depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
+	default n
+	select MMU_NOTIFIER
+	---help---
+	The GRU is a hardware resource located in the system chipset. The GRU
+	contains memory that can be mmapped into the user address space. This memory is
+	used to communicate with the GRU to perform functions such as load/store,
+	scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
+	instructions using user virtual addresses. GRU instructions (ex., bcopy) use
+	user virtual addresses for operands.
+
+	If you are not running on a SGI UV system, say N.
+
+config SGI_GRU_DEBUG
+	bool  "SGI GRU driver debug"
+	depends on SGI_GRU
+	default n
+	---help---
+	This option enables addition debugging code for the SGI GRU driver. If
+	you are unsure, say N.
+
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f5e273420c0..c6c13f60b45 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -28,4 +28,5 @@ obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)		+= sgi-xp/
+obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index e7a3fe508df..d8b0d326e45 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -192,6 +192,9 @@ static struct quirk_entry *quirks;
 
 static void set_quirks(void)
 {
+	if (!interface)
+		return;
+
 	if (quirks->mailled)
 		interface->capability |= ACER_CAP_MAILLED;
 
@@ -803,11 +806,30 @@ static acpi_status get_u32(u32 *value, u32 cap)
 
 static acpi_status set_u32(u32 value, u32 cap)
 {
+	acpi_status status;
+
 	if (interface->capability & cap) {
 		switch (interface->type) {
 		case ACER_AMW0:
 			return AMW0_set_u32(value, cap, interface);
 		case ACER_AMW0_V2:
+			if (cap == ACER_CAP_MAILLED)
+				return AMW0_set_u32(value, cap, interface);
+
+			/*
+			 * On some models, some WMID methods don't toggle
+			 * properly. For those cases, we want to run the AMW0
+			 * method afterwards to be certain we've really toggled
+			 * the device state.
+			 */
+			if (cap == ACER_CAP_WIRELESS ||
+				cap == ACER_CAP_BLUETOOTH) {
+				status = WMID_set_u32(value, cap, interface);
+				if (ACPI_FAILURE(status))
+					return status;
+
+				return AMW0_set_u32(value, cap, interface);
+			}
 		case ACER_WMID:
 			return WMID_set_u32(value, cap, interface);
 		default:
@@ -1167,7 +1189,7 @@ static int create_debugfs(void)
 	return 0;
 
 error_debugfs:
-		remove_debugfs();
+	remove_debugfs();
 	return -ENOMEM;
 }
 
@@ -1218,6 +1240,8 @@ static int __init acer_wmi_init(void)
 		return -ENODEV;
 	}
 
+	set_quirks();
+
 	if (platform_driver_register(&acer_platform_driver)) {
 		printk(ACER_ERR "Unable to register platform driver.\n");
 		goto error_platform_register;
@@ -1248,6 +1272,7 @@ error_platform_register:
 static void __exit acer_wmi_exit(void)
 {
 	remove_sysfs(acer_platform_device);
+	remove_debugfs();
 	platform_device_del(acer_platform_device);
 	platform_driver_unregister(&acer_platform_driver);
 
diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c
index 9e8d79e7e9f..facdb9893c8 100644
--- a/drivers/misc/eeepc-laptop.c
+++ b/drivers/misc/eeepc-laptop.c
@@ -553,9 +553,9 @@ static void eeepc_hwmon_exit(void)
 	hwmon = eeepc_hwmon_device;
 	if (!hwmon)
 		return ;
-	hwmon_device_unregister(hwmon);
 	sysfs_remove_group(&hwmon->kobj,
 			   &hwmon_attribute_group);
+	hwmon_device_unregister(hwmon);
 	eeepc_hwmon_device = NULL;
 }
 
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c
index ea55654e594..15b1780025c 100644
--- a/drivers/misc/eeprom_93cx6.c
+++ b/drivers/misc/eeprom_93cx6.c
@@ -26,7 +26,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/delay.h>
 #include <linux/eeprom_93cx6.h>
 
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index 7a1ef6c262d..3e56203e494 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -463,6 +463,13 @@ static struct dmi_system_id __initdata fujitsu_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"),
 		     },
 	 .callback = dmi_check_cb_s6410},
+	{
+	 .ident = "FUJITSU LifeBook P8010",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"),
+		    },
+	 .callback = dmi_check_cb_s6410},
 	{}
 };
 
diff --git a/drivers/misc/hp-wmi.c b/drivers/misc/hp-wmi.c
index 1dbcbcb323a..6d407c2a4f9 100644
--- a/drivers/misc/hp-wmi.c
+++ b/drivers/misc/hp-wmi.c
@@ -49,6 +49,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
 #define HPWMI_ALS_QUERY 0x3
 #define HPWMI_DOCK_QUERY 0x4
 #define HPWMI_WIRELESS_QUERY 0x5
+#define HPWMI_HOTKEY_QUERY 0xc
 
 static int __init hp_wmi_bios_setup(struct platform_device *device);
 static int __exit hp_wmi_bios_remove(struct platform_device *device);
@@ -69,7 +70,7 @@ struct bios_return {
 
 struct key_entry {
 	char type;		/* See KE_* below */
-	u8 code;
+	u16 code;
 	u16 keycode;
 };
 
@@ -79,7 +80,9 @@ static struct key_entry hp_wmi_keymap[] = {
 	{KE_SW, 0x01, SW_DOCK},
 	{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
 	{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
-	{KE_KEY, 0x04, KEY_HELP},
+	{KE_KEY, 0x20e6, KEY_PROG1},
+	{KE_KEY, 0x2142, KEY_MEDIA},
+	{KE_KEY, 0x231b, KEY_HELP},
 	{KE_END, 0}
 };
 
@@ -177,9 +180,9 @@ static int hp_wmi_wifi_state(void)
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x100)
-		return 1;
+		return RFKILL_STATE_UNBLOCKED;
 	else
-		return 0;
+		return RFKILL_STATE_SOFT_BLOCKED;
 }
 
 static int hp_wmi_bluetooth_state(void)
@@ -187,9 +190,9 @@ static int hp_wmi_bluetooth_state(void)
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x10000)
-		return 1;
+		return RFKILL_STATE_UNBLOCKED;
 	else
-		return 0;
+		return RFKILL_STATE_SOFT_BLOCKED;
 }
 
 static int hp_wmi_wwan_state(void)
@@ -197,9 +200,9 @@ static int hp_wmi_wwan_state(void)
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x1000000)
-		return 1;
+		return RFKILL_STATE_UNBLOCKED;
 	else
-		return 0;
+		return RFKILL_STATE_SOFT_BLOCKED;
 }
 
 static ssize_t show_display(struct device *dev, struct device_attribute *attr,
@@ -318,6 +321,9 @@ void hp_wmi_notify(u32 value, void *context)
 
 	if (obj && obj->type == ACPI_TYPE_BUFFER && obj->buffer.length == 8) {
 		int eventcode = *((u8 *) obj->buffer.pointer);
+		if (eventcode == 0x4)
+			eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
+							 0);
 		key = hp_wmi_get_entry_by_scancode(eventcode);
 		if (key) {
 			switch (key->type) {
@@ -338,12 +344,14 @@ void hp_wmi_notify(u32 value, void *context)
 			}
 		} else if (eventcode == 0x5) {
 			if (wifi_rfkill)
-				wifi_rfkill->state = hp_wmi_wifi_state();
+				rfkill_force_state(wifi_rfkill,
+						   hp_wmi_wifi_state());
 			if (bluetooth_rfkill)
-				bluetooth_rfkill->state =
-				    hp_wmi_bluetooth_state();
+				rfkill_force_state(bluetooth_rfkill,
+						   hp_wmi_bluetooth_state());
 			if (wwan_rfkill)
-				wwan_rfkill->state = hp_wmi_wwan_state();
+				rfkill_force_state(wwan_rfkill,
+						   hp_wmi_wwan_state());
 		} else
 			printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
 			       eventcode);
@@ -398,6 +406,7 @@ static void cleanup_sysfs(struct platform_device *device)
 static int __init hp_wmi_bios_setup(struct platform_device *device)
 {
 	int err;
+	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	err = device_create_file(&device->dev, &dev_attr_display);
 	if (err)
@@ -412,28 +421,33 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 	if (err)
 		goto add_sysfs_error;
 
-	wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
-	wifi_rfkill->name = "hp-wifi";
-	wifi_rfkill->state = hp_wmi_wifi_state();
-	wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
-	wifi_rfkill->user_claim_unsupported = 1;
-
-	bluetooth_rfkill = rfkill_allocate(&device->dev,
-					   RFKILL_TYPE_BLUETOOTH);
-	bluetooth_rfkill->name = "hp-bluetooth";
-	bluetooth_rfkill->state = hp_wmi_bluetooth_state();
-	bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
-	bluetooth_rfkill->user_claim_unsupported = 1;
-
-	wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WIMAX);
-	wwan_rfkill->name = "hp-wwan";
-	wwan_rfkill->state = hp_wmi_wwan_state();
-	wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
-	wwan_rfkill->user_claim_unsupported = 1;
-
-	rfkill_register(wifi_rfkill);
-	rfkill_register(bluetooth_rfkill);
-	rfkill_register(wwan_rfkill);
+	if (wireless & 0x1) {
+		wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
+		wifi_rfkill->name = "hp-wifi";
+		wifi_rfkill->state = hp_wmi_wifi_state();
+		wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
+		wifi_rfkill->user_claim_unsupported = 1;
+		rfkill_register(wifi_rfkill);
+	}
+
+	if (wireless & 0x2) {
+		bluetooth_rfkill = rfkill_allocate(&device->dev,
+						   RFKILL_TYPE_BLUETOOTH);
+		bluetooth_rfkill->name = "hp-bluetooth";
+		bluetooth_rfkill->state = hp_wmi_bluetooth_state();
+		bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
+		bluetooth_rfkill->user_claim_unsupported = 1;
+		rfkill_register(bluetooth_rfkill);
+	}
+
+	if (wireless & 0x4) {
+		wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN);
+		wwan_rfkill->name = "hp-wwan";
+		wwan_rfkill->state = hp_wmi_wwan_state();
+		wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
+		wwan_rfkill->user_claim_unsupported = 1;
+		rfkill_register(wwan_rfkill);
+	}
 
 	return 0;
 add_sysfs_error:
@@ -445,9 +459,12 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
 {
 	cleanup_sysfs(device);
 
-	rfkill_unregister(wifi_rfkill);
-	rfkill_unregister(bluetooth_rfkill);
-	rfkill_unregister(wwan_rfkill);
+	if (wifi_rfkill)
+		rfkill_unregister(wifi_rfkill);
+	if (bluetooth_rfkill)
+		rfkill_unregister(bluetooth_rfkill);
+	if (wwan_rfkill)
+		rfkill_unregister(wwan_rfkill);
 
 	return 0;
 }
diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile
new file mode 100644
index 00000000000..d03597a521b
--- /dev/null
+++ b/drivers/misc/sgi-gru/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_SGI_GRU) := gru.o
+gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o
+
diff --git a/drivers/misc/sgi-gru/gru.h b/drivers/misc/sgi-gru/gru.h
new file mode 100644
index 00000000000..40df7cb3f0a
--- /dev/null
+++ b/drivers/misc/sgi-gru/gru.h
@@ -0,0 +1,67 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRU_H__
+#define __GRU_H__
+
+/*
+ * GRU architectural definitions
+ */
+#define GRU_CACHE_LINE_BYTES		64
+#define GRU_HANDLE_STRIDE		256
+#define GRU_CB_BASE			0
+#define GRU_DS_BASE			0x20000
+
+/*
+ * Size used to map GRU GSeg
+ */
+#if defined CONFIG_IA64
+#define GRU_GSEG_PAGESIZE	(256 * 1024UL)
+#elif defined CONFIG_X86_64
+#define GRU_GSEG_PAGESIZE	(256 * 1024UL)		/* ZZZ 2MB ??? */
+#else
+#error "Unsupported architecture"
+#endif
+
+/*
+ * Structure for obtaining GRU resource information
+ */
+struct gru_chiplet_info {
+	int	node;
+	int	chiplet;
+	int	blade;
+	int	total_dsr_bytes;
+	int	total_cbr;
+	int	total_user_dsr_bytes;
+	int	total_user_cbr;
+	int	free_user_dsr_bytes;
+	int	free_user_cbr;
+};
+
+/* Flags for GRU options on the gru_create_context() call */
+/* Select one of the follow 4 options to specify how TLB misses are handled */
+#define GRU_OPT_MISS_DEFAULT	0x0000	/* Use default mode */
+#define GRU_OPT_MISS_USER_POLL	0x0001	/* User will poll CB for faults */
+#define GRU_OPT_MISS_FMM_INTR	0x0002	/* Send interrupt to cpu to
+					   handle fault */
+#define GRU_OPT_MISS_FMM_POLL	0x0003	/* Use system polling thread */
+#define GRU_OPT_MISS_MASK	0x0003	/* Mask for TLB MISS option */
+
+
+
+#endif		/* __GRU_H__ */
diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h
new file mode 100644
index 00000000000..0dc36225c7c
--- /dev/null
+++ b/drivers/misc/sgi-gru/gru_instructions.h
@@ -0,0 +1,669 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRU_INSTRUCTIONS_H__
+#define __GRU_INSTRUCTIONS_H__
+
+#define gru_flush_cache_hook(p)
+#define gru_emulator_wait_hook(p, w)
+
+/*
+ * Architecture dependent functions
+ */
+
+#if defined CONFIG_IA64
+#include <linux/compiler.h>
+#include <asm/intrinsics.h>
+#define __flush_cache(p)		ia64_fc(p)
+/* Use volatile on IA64 to ensure ordering via st4.rel */
+#define gru_ordered_store_int(p,v)					\
+		do {							\
+			barrier();					\
+			*((volatile int *)(p)) = v; /* force st.rel */	\
+		} while (0)
+#elif defined CONFIG_X86_64
+#define __flush_cache(p)		clflush(p)
+#define gru_ordered_store_int(p,v)					\
+		do {							\
+			barrier();					\
+			*(int *)p = v;					\
+		} while (0)
+#else
+#error "Unsupported architecture"
+#endif
+
+/*
+ * Control block status and exception codes
+ */
+#define CBS_IDLE			0
+#define CBS_EXCEPTION			1
+#define CBS_ACTIVE			2
+#define CBS_CALL_OS			3
+
+/* CB substatus bitmasks */
+#define CBSS_MSG_QUEUE_MASK		7
+#define CBSS_IMPLICIT_ABORT_ACTIVE_MASK	8
+
+/* CB substatus message queue values (low 3 bits of substatus) */
+#define CBSS_NO_ERROR			0
+#define CBSS_LB_OVERFLOWED		1
+#define CBSS_QLIMIT_REACHED		2
+#define CBSS_PAGE_OVERFLOW		3
+#define CBSS_AMO_NACKED			4
+#define CBSS_PUT_NACKED			5
+
+/*
+ * Structure used to fetch exception detail for CBs that terminate with
+ * CBS_EXCEPTION
+ */
+struct control_block_extended_exc_detail {
+	unsigned long	cb;
+	int		opc;
+	int		ecause;
+	int		exopc;
+	long		exceptdet0;
+	int		exceptdet1;
+};
+
+/*
+ * Instruction formats
+ */
+
+/*
+ * Generic instruction format.
+ * This definition has precise bit field definitions.
+ */
+struct gru_instruction_bits {
+    /* DW 0  - low */
+    unsigned int		icmd:      1;
+    unsigned char		ima:	   3;	/* CB_DelRep, unmapped mode */
+    unsigned char		reserved0: 4;
+    unsigned int		xtype:     3;
+    unsigned int		iaa0:      2;
+    unsigned int		iaa1:      2;
+    unsigned char		reserved1: 1;
+    unsigned char		opc:       8;	/* opcode */
+    unsigned char		exopc:     8;	/* extended opcode */
+    /* DW 0  - high */
+    unsigned int		idef2:    22;	/* TRi0 */
+    unsigned char		reserved2: 2;
+    unsigned char		istatus:   2;
+    unsigned char		isubstatus:4;
+    unsigned char		reserved3: 2;
+    /* DW 1 */
+    unsigned long		idef4;		/* 42 bits: TRi1, BufSize */
+    /* DW 2-6 */
+    unsigned long		idef1;		/* BAddr0 */
+    unsigned long		idef5;		/* Nelem */
+    unsigned long		idef6;		/* Stride, Operand1 */
+    unsigned long		idef3;		/* BAddr1, Value, Operand2 */
+    unsigned long		reserved4;
+    /* DW 7 */
+    unsigned long		avalue;		 /* AValue */
+};
+
+/*
+ * Generic instruction with friendlier names. This format is used
+ * for inline instructions.
+ */
+struct gru_instruction {
+    /* DW 0 */
+    unsigned int		op32;    /* icmd,xtype,iaa0,ima,opc */
+    unsigned int		tri0;
+    unsigned long		tri1_bufsize;		/* DW 1 */
+    unsigned long		baddr0;			/* DW 2 */
+    unsigned long		nelem;			/* DW 3 */
+    unsigned long		op1_stride;		/* DW 4 */
+    unsigned long		op2_value_baddr1;	/* DW 5 */
+    unsigned long		reserved0;		/* DW 6 */
+    unsigned long		avalue;			/* DW 7 */
+};
+
+/* Some shifts and masks for the low 32 bits of a GRU command */
+#define GRU_CB_ICMD_SHFT	0
+#define GRU_CB_ICMD_MASK	0x1
+#define GRU_CB_XTYPE_SHFT	8
+#define GRU_CB_XTYPE_MASK	0x7
+#define GRU_CB_IAA0_SHFT	11
+#define GRU_CB_IAA0_MASK	0x3
+#define GRU_CB_IAA1_SHFT	13
+#define GRU_CB_IAA1_MASK	0x3
+#define GRU_CB_IMA_SHFT		1
+#define GRU_CB_IMA_MASK		0x3
+#define GRU_CB_OPC_SHFT		16
+#define GRU_CB_OPC_MASK		0xff
+#define GRU_CB_EXOPC_SHFT	24
+#define GRU_CB_EXOPC_MASK	0xff
+
+/* GRU instruction opcodes (opc field) */
+#define OP_NOP		0x00
+#define OP_BCOPY	0x01
+#define OP_VLOAD	0x02
+#define OP_IVLOAD	0x03
+#define OP_VSTORE	0x04
+#define OP_IVSTORE	0x05
+#define OP_VSET		0x06
+#define OP_IVSET	0x07
+#define OP_MESQ		0x08
+#define OP_GAMXR	0x09
+#define OP_GAMIR	0x0a
+#define OP_GAMIRR	0x0b
+#define OP_GAMER	0x0c
+#define OP_GAMERR	0x0d
+#define OP_BSTORE	0x0e
+#define OP_VFLUSH	0x0f
+
+
+/* Extended opcodes values (exopc field) */
+
+/* GAMIR - AMOs with implicit operands */
+#define EOP_IR_FETCH	0x01 /* Plain fetch of memory */
+#define EOP_IR_CLR	0x02 /* Fetch and clear */
+#define EOP_IR_INC	0x05 /* Fetch and increment */
+#define EOP_IR_DEC	0x07 /* Fetch and decrement */
+#define EOP_IR_QCHK1	0x0d /* Queue check, 64 byte msg */
+#define EOP_IR_QCHK2	0x0e /* Queue check, 128 byte msg */
+
+/* GAMIRR - Registered AMOs with implicit operands */
+#define EOP_IRR_FETCH	0x01 /* Registered fetch of memory */
+#define EOP_IRR_CLR	0x02 /* Registered fetch and clear */
+#define EOP_IRR_INC	0x05 /* Registered fetch and increment */
+#define EOP_IRR_DEC	0x07 /* Registered fetch and decrement */
+#define EOP_IRR_DECZ	0x0f /* Registered fetch and decrement, update on zero*/
+
+/* GAMER - AMOs with explicit operands */
+#define EOP_ER_SWAP	0x00 /* Exchange argument and memory */
+#define EOP_ER_OR	0x01 /* Logical OR with memory */
+#define EOP_ER_AND	0x02 /* Logical AND with memory */
+#define EOP_ER_XOR	0x03 /* Logical XOR with memory */
+#define EOP_ER_ADD	0x04 /* Add value to memory */
+#define EOP_ER_CSWAP	0x08 /* Compare with operand2, write operand1 if match*/
+#define EOP_ER_CADD	0x0c /* Queue check, operand1*64 byte msg */
+
+/* GAMERR - Registered AMOs with explicit operands */
+#define EOP_ERR_SWAP	0x00 /* Exchange argument and memory */
+#define EOP_ERR_OR	0x01 /* Logical OR with memory */
+#define EOP_ERR_AND	0x02 /* Logical AND with memory */
+#define EOP_ERR_XOR	0x03 /* Logical XOR with memory */
+#define EOP_ERR_ADD	0x04 /* Add value to memory */
+#define EOP_ERR_CSWAP	0x08 /* Compare with operand2, write operand1 if match*/
+#define EOP_ERR_EPOLL	0x09 /* Poll for equality */
+#define EOP_ERR_NPOLL	0x0a /* Poll for inequality */
+
+/* GAMXR - SGI Arithmetic unit */
+#define EOP_XR_CSWAP	0x0b /* Masked compare exchange */
+
+
+/* Transfer types (xtype field) */
+#define XTYPE_B		0x0	/* byte */
+#define XTYPE_S		0x1	/* short (2-byte) */
+#define XTYPE_W		0x2	/* word (4-byte) */
+#define XTYPE_DW	0x3	/* doubleword (8-byte) */
+#define XTYPE_CL	0x6	/* cacheline (64-byte) */
+
+
+/* Instruction access attributes (iaa0, iaa1 fields) */
+#define IAA_RAM		0x0	/* normal cached RAM access */
+#define IAA_NCRAM	0x2	/* noncoherent RAM access */
+#define IAA_MMIO	0x1	/* noncoherent memory-mapped I/O space */
+#define IAA_REGISTER	0x3	/* memory-mapped registers, etc. */
+
+
+/* Instruction mode attributes (ima field) */
+#define IMA_MAPPED	0x0	/* Virtual mode  */
+#define IMA_CB_DELAY	0x1	/* hold read responses until status changes */
+#define IMA_UNMAPPED	0x2	/* bypass the TLBs (OS only) */
+#define IMA_INTERRUPT	0x4	/* Interrupt when instruction completes */
+
+/* CBE ecause bits */
+#define CBE_CAUSE_RI				(1 << 0)
+#define CBE_CAUSE_INVALID_INSTRUCTION		(1 << 1)
+#define CBE_CAUSE_UNMAPPED_MODE_FORBIDDEN	(1 << 2)
+#define CBE_CAUSE_PE_CHECK_DATA_ERROR		(1 << 3)
+#define CBE_CAUSE_IAA_GAA_MISMATCH		(1 << 4)
+#define CBE_CAUSE_DATA_SEGMENT_LIMIT_EXCEPTION	(1 << 5)
+#define CBE_CAUSE_OS_FATAL_TLB_FAULT		(1 << 6)
+#define CBE_CAUSE_EXECUTION_HW_ERROR		(1 << 7)
+#define CBE_CAUSE_TLBHW_ERROR			(1 << 8)
+#define CBE_CAUSE_RA_REQUEST_TIMEOUT		(1 << 9)
+#define CBE_CAUSE_HA_REQUEST_TIMEOUT		(1 << 10)
+#define CBE_CAUSE_RA_RESPONSE_FATAL		(1 << 11)
+#define CBE_CAUSE_RA_RESPONSE_NON_FATAL		(1 << 12)
+#define CBE_CAUSE_HA_RESPONSE_FATAL		(1 << 13)
+#define CBE_CAUSE_HA_RESPONSE_NON_FATAL		(1 << 14)
+#define CBE_CAUSE_ADDRESS_SPACE_DECODE_ERROR	(1 << 15)
+#define CBE_CAUSE_RESPONSE_DATA_ERROR		(1 << 16)
+#define CBE_CAUSE_PROTOCOL_STATE_DATA_ERROR	(1 << 17)
+
+/*
+ * Exceptions are retried for the following cases. If any OTHER bits are set
+ * in ecause, the exception is not retryable.
+ */
+#define EXCEPTION_RETRY_BITS (CBE_CAUSE_RESPONSE_DATA_ERROR |		\
+			      CBE_CAUSE_RA_REQUEST_TIMEOUT |		\
+			      CBE_CAUSE_TLBHW_ERROR |			\
+			      CBE_CAUSE_HA_REQUEST_TIMEOUT)
+
+/* Message queue head structure */
+union gru_mesqhead {
+	unsigned long	val;
+	struct {
+		unsigned int	head;
+		unsigned int	limit;
+	};
+};
+
+
+/* Generate the low word of a GRU instruction */
+static inline unsigned int
+__opword(unsigned char opcode, unsigned char exopc, unsigned char xtype,
+       unsigned char iaa0, unsigned char iaa1,
+       unsigned char ima)
+{
+    return (1 << GRU_CB_ICMD_SHFT) |
+	   (iaa0 << GRU_CB_IAA0_SHFT) |
+	   (iaa1 << GRU_CB_IAA1_SHFT) |
+	   (ima << GRU_CB_IMA_SHFT) |
+	   (xtype << GRU_CB_XTYPE_SHFT) |
+	   (opcode << GRU_CB_OPC_SHFT) |
+	   (exopc << GRU_CB_EXOPC_SHFT);
+}
+
+/*
+ * Architecture specific intrinsics
+ */
+static inline void gru_flush_cache(void *p)
+{
+	__flush_cache(p);
+}
+
+/*
+ * Store the lower 32 bits of the command including the "start" bit. Then
+ * start the instruction executing.
+ */
+static inline void gru_start_instruction(struct gru_instruction *ins, int op32)
+{
+	gru_ordered_store_int(ins, op32);
+}
+
+
+/* Convert "hints" to IMA */
+#define CB_IMA(h)		((h) | IMA_UNMAPPED)
+
+/* Convert data segment cache line index into TRI0 / TRI1 value */
+#define GRU_DINDEX(i)		((i) * GRU_CACHE_LINE_BYTES)
+
+/* Inline functions for GRU instructions.
+ *     Note:
+ *     	- nelem and stride are in elements
+ *     	- tri0/tri1 is in bytes for the beginning of the data segment.
+ */
+static inline void gru_vload(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned char xtype, unsigned long nelem,
+		unsigned long stride, unsigned long hints)
+{
+	struct gru_instruction *ins = (struct gru_instruction *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->op1_stride = stride;
+	gru_start_instruction(ins, __opword(OP_VLOAD, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_vstore(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned char xtype, unsigned long nelem,
+		unsigned long stride, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->op1_stride = stride;
+	gru_start_instruction(ins, __opword(OP_VSTORE, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_ivload(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned int tri1, unsigned char xtype,
+		unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->tri1_bufsize = tri1;
+	gru_start_instruction(ins, __opword(OP_IVLOAD, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_ivstore(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned int tri1,
+		unsigned char xtype, unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->tri1_bufsize = tri1;
+	gru_start_instruction(ins, __opword(OP_IVSTORE, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_vset(void *cb, unsigned long mem_addr,
+		unsigned long value, unsigned char xtype, unsigned long nelem,
+		unsigned long stride, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->op2_value_baddr1 = value;
+	ins->nelem = nelem;
+	ins->op1_stride = stride;
+	gru_start_instruction(ins, __opword(OP_VSET, 0, xtype, IAA_RAM, 0,
+					 CB_IMA(hints)));
+}
+
+static inline void gru_ivset(void *cb, unsigned long mem_addr,
+		unsigned int tri1, unsigned long value, unsigned char xtype,
+		unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->op2_value_baddr1 = value;
+	ins->nelem = nelem;
+	ins->tri1_bufsize = tri1;
+	gru_start_instruction(ins, __opword(OP_IVSET, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_vflush(void *cb, unsigned long mem_addr,
+		unsigned long nelem, unsigned char xtype, unsigned long stride,
+		unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->op1_stride = stride;
+	ins->nelem = nelem;
+	gru_start_instruction(ins, __opword(OP_VFLUSH, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_nop(void *cb, int hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	gru_start_instruction(ins, __opword(OP_NOP, 0, 0, 0, 0, CB_IMA(hints)));
+}
+
+
+static inline void gru_bcopy(void *cb, const unsigned long src,
+		unsigned long dest,
+		unsigned int tri0, unsigned int xtype, unsigned long nelem,
+		unsigned int bufsize, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op2_value_baddr1 = (long)dest;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->tri1_bufsize = bufsize;
+	gru_start_instruction(ins, __opword(OP_BCOPY, 0, xtype, IAA_RAM,
+					IAA_RAM, CB_IMA(hints)));
+}
+
+static inline void gru_bstore(void *cb, const unsigned long src,
+		unsigned long dest, unsigned int tri0, unsigned int xtype,
+		unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op2_value_baddr1 = (long)dest;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	gru_start_instruction(ins, __opword(OP_BSTORE, 0, xtype, 0, IAA_RAM,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamir(void *cb, int exopc, unsigned long src,
+		unsigned int xtype, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	gru_start_instruction(ins, __opword(OP_GAMIR, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamirr(void *cb, int exopc, unsigned long src,
+		unsigned int xtype, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	gru_start_instruction(ins, __opword(OP_GAMIRR, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamer(void *cb, int exopc, unsigned long src,
+		unsigned int xtype,
+		unsigned long operand1, unsigned long operand2,
+		unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op1_stride = operand1;
+	ins->op2_value_baddr1 = operand2;
+	gru_start_instruction(ins, __opword(OP_GAMER, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamerr(void *cb, int exopc, unsigned long src,
+		unsigned int xtype, unsigned long operand1,
+		unsigned long operand2, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op1_stride = operand1;
+	ins->op2_value_baddr1 = operand2;
+	gru_start_instruction(ins, __opword(OP_GAMERR, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamxr(void *cb, unsigned long src,
+		unsigned int tri0, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->nelem = 4;
+	gru_start_instruction(ins, __opword(OP_GAMXR, EOP_XR_CSWAP, XTYPE_DW,
+				 IAA_RAM, 0, CB_IMA(hints)));
+}
+
+static inline void gru_mesq(void *cb, unsigned long queue,
+		unsigned long tri0, unsigned long nelem,
+		unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)queue;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	gru_start_instruction(ins, __opword(OP_MESQ, 0, XTYPE_CL, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline unsigned long gru_get_amo_value(void *cb)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	return ins->avalue;
+}
+
+static inline int gru_get_amo_value_head(void *cb)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	return ins->avalue & 0xffffffff;
+}
+
+static inline int gru_get_amo_value_limit(void *cb)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	return ins->avalue >> 32;
+}
+
+static inline union gru_mesqhead  gru_mesq_head(int head, int limit)
+{
+	union gru_mesqhead mqh;
+
+	mqh.head = head;
+	mqh.limit = limit;
+	return mqh;
+}
+
+/*
+ * Get struct control_block_extended_exc_detail for CB.
+ */
+extern int gru_get_cb_exception_detail(void *cb,
+		       struct control_block_extended_exc_detail *excdet);
+
+#define GRU_EXC_STR_SIZE		256
+
+extern int gru_check_status_proc(void *cb);
+extern int gru_wait_proc(void *cb);
+extern void gru_wait_abort_proc(void *cb);
+
+/*
+ * Control block definition for checking status
+ */
+struct gru_control_block_status {
+	unsigned int	icmd		:1;
+	unsigned int	unused1		:31;
+	unsigned int	unused2		:24;
+	unsigned int	istatus		:2;
+	unsigned int	isubstatus	:4;
+	unsigned int	inused3		:2;
+};
+
+/* Get CB status */
+static inline int gru_get_cb_status(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	return cbs->istatus;
+}
+
+/* Get CB message queue substatus */
+static inline int gru_get_cb_message_queue_substatus(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	return cbs->isubstatus & CBSS_MSG_QUEUE_MASK;
+}
+
+/* Get CB substatus */
+static inline int gru_get_cb_substatus(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	return cbs->isubstatus;
+}
+
+/* Check the status of a CB. If the CB is in UPM mode, call the
+ * OS to handle the UPM status.
+ * Returns the CB status field value (0 for normal completion)
+ */
+static inline int gru_check_status(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+	int ret = cbs->istatus;
+
+	if (ret == CBS_CALL_OS)
+		ret = gru_check_status_proc(cb);
+	return ret;
+}
+
+/* Wait for CB to complete.
+ * Returns the CB status field value (0 for normal completion)
+ */
+static inline int gru_wait(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+	int ret = cbs->istatus;;
+
+	if (ret != CBS_IDLE)
+		ret = gru_wait_proc(cb);
+	return ret;
+}
+
+/* Wait for CB to complete. Aborts program if error. (Note: error does NOT
+ * mean TLB mis - only fatal errors such as memory parity error or user
+ * bugs will cause termination.
+ */
+static inline void gru_wait_abort(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	if (cbs->istatus != CBS_IDLE)
+		gru_wait_abort_proc(cb);
+}
+
+
+/*
+ * Get a pointer to a control block
+ * 	gseg	- GSeg address returned from gru_get_thread_gru_segment()
+ * 	index	- index of desired CB
+ */
+static inline void *gru_get_cb_pointer(void *gseg,
+						      int index)
+{
+	return gseg + GRU_CB_BASE + index * GRU_HANDLE_STRIDE;
+}
+
+/*
+ * Get a pointer to a cacheline in the data segment portion of a GSeg
+ * 	gseg	- GSeg address returned from gru_get_thread_gru_segment()
+ * 	index	- index of desired cache line
+ */
+static inline void *gru_get_data_pointer(void *gseg, int index)
+{
+	return gseg + GRU_DS_BASE + index * GRU_CACHE_LINE_BYTES;
+}
+
+/*
+ * Convert a vaddr into the tri index within the GSEG
+ * 	vaddr		- virtual address of within gseg
+ */
+static inline int gru_get_tri(void *vaddr)
+{
+	return ((unsigned long)vaddr & (GRU_GSEG_PAGESIZE - 1)) - GRU_DS_BASE;
+}
+#endif		/* __GRU_INSTRUCTIONS_H__ */
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
new file mode 100644
index 00000000000..3d33015bbf3
--- /dev/null
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -0,0 +1,633 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              FAULT HANDLER FOR GRU DETECTED TLB MISSES
+ *
+ * This file contains code that handles TLB misses within the GRU.
+ * These misses are reported either via interrupts or user polling of
+ * the user CB.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include "gru.h"
+#include "grutables.h"
+#include "grulib.h"
+#include "gru_instructions.h"
+#include <asm/uv/uv_hub.h>
+
+/*
+ * Test if a physical address is a valid GRU GSEG address
+ */
+static inline int is_gru_paddr(unsigned long paddr)
+{
+	return paddr >= gru_start_paddr && paddr < gru_end_paddr;
+}
+
+/*
+ * Find the vma of a GRU segment. Caller must hold mmap_sem.
+ */
+struct vm_area_struct *gru_find_vma(unsigned long vaddr)
+{
+	struct vm_area_struct *vma;
+
+	vma = find_vma(current->mm, vaddr);
+	if (vma && vma->vm_start <= vaddr && vma->vm_ops == &gru_vm_ops)
+		return vma;
+	return NULL;
+}
+
+/*
+ * Find and lock the gts that contains the specified user vaddr.
+ *
+ * Returns:
+ * 	- *gts with the mmap_sem locked for read and the GTS locked.
+ *	- NULL if vaddr invalid OR is not a valid GSEG vaddr.
+ */
+
+static struct gru_thread_state *gru_find_lock_gts(unsigned long vaddr)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	struct gru_thread_state *gts = NULL;
+
+	down_read(&mm->mmap_sem);
+	vma = gru_find_vma(vaddr);
+	if (vma)
+		gts = gru_find_thread_state(vma, TSID(vaddr, vma));
+	if (gts)
+		mutex_lock(&gts->ts_ctxlock);
+	else
+		up_read(&mm->mmap_sem);
+	return gts;
+}
+
+static struct gru_thread_state *gru_alloc_locked_gts(unsigned long vaddr)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	struct gru_thread_state *gts = NULL;
+
+	down_write(&mm->mmap_sem);
+	vma = gru_find_vma(vaddr);
+	if (vma)
+		gts = gru_alloc_thread_state(vma, TSID(vaddr, vma));
+	if (gts) {
+		mutex_lock(&gts->ts_ctxlock);
+		downgrade_write(&mm->mmap_sem);
+	} else {
+		up_write(&mm->mmap_sem);
+	}
+
+	return gts;
+}
+
+/*
+ * Unlock a GTS that was previously locked with gru_find_lock_gts().
+ */
+static void gru_unlock_gts(struct gru_thread_state *gts)
+{
+	mutex_unlock(&gts->ts_ctxlock);
+	up_read(&current->mm->mmap_sem);
+}
+
+/*
+ * Set a CB.istatus to active using a user virtual address. This must be done
+ * just prior to a TFH RESTART. The new cb.istatus is an in-cache status ONLY.
+ * If the line is evicted, the status may be lost. The in-cache update
+ * is necessary to prevent the user from seeing a stale cb.istatus that will
+ * change as soon as the TFH restart is complete. Races may cause an
+ * occasional failure to clear the cb.istatus, but that is ok.
+ *
+ * If the cb address is not valid (should not happen, but...), nothing
+ * bad will happen.. The get_user()/put_user() will fail but there
+ * are no bad side-effects.
+ */
+static void gru_cb_set_istatus_active(unsigned long __user *cb)
+{
+	union {
+		struct gru_instruction_bits bits;
+		unsigned long dw;
+	} u;
+
+	if (cb) {
+		get_user(u.dw, cb);
+		u.bits.istatus = CBS_ACTIVE;
+		put_user(u.dw, cb);
+	}
+}
+
+/*
+ * Convert a interrupt IRQ to a pointer to the GRU GTS that caused the
+ * interrupt. Interrupts are always sent to a cpu on the blade that contains the
+ * GRU (except for headless blades which are not currently supported). A blade
+ * has N grus; a block of N consecutive IRQs is assigned to the GRUs. The IRQ
+ * number uniquely identifies the GRU chiplet on the local blade that caused the
+ * interrupt. Always called in interrupt context.
+ */
+static inline struct gru_state *irq_to_gru(int irq)
+{
+	return &gru_base[uv_numa_blade_id()]->bs_grus[irq - IRQ_GRU];
+}
+
+/*
+ * Read & clear a TFM
+ *
+ * The GRU has an array of fault maps. A map is private to a cpu
+ * Only one cpu will be accessing a cpu's fault map.
+ *
+ * This function scans the cpu-private fault map & clears all bits that
+ * are set. The function returns a bitmap that indicates the bits that
+ * were cleared. Note that sense the maps may be updated asynchronously by
+ * the GRU, atomic operations must be used to clear bits.
+ */
+static void get_clear_fault_map(struct gru_state *gru,
+				struct gru_tlb_fault_map *map)
+{
+	unsigned long i, k;
+	struct gru_tlb_fault_map *tfm;
+
+	tfm = get_tfm_for_cpu(gru, gru_cpu_fault_map_id());
+	prefetchw(tfm);		/* Helps on hardware, required for emulator */
+	for (i = 0; i < BITS_TO_LONGS(GRU_NUM_CBE); i++) {
+		k = tfm->fault_bits[i];
+		if (k)
+			k = xchg(&tfm->fault_bits[i], 0UL);
+		map->fault_bits[i] = k;
+	}
+
+	/*
+	 * Not functionally required but helps performance. (Required
+	 * on emulator)
+	 */
+	gru_flush_cache(tfm);
+}
+
+/*
+ * Atomic (interrupt context) & non-atomic (user context) functions to
+ * convert a vaddr into a physical address. The size of the page
+ * is returned in pageshift.
+ * 	returns:
+ * 		  0 - successful
+ * 		< 0 - error code
+ * 		  1 - (atomic only) try again in non-atomic context
+ */
+static int non_atomic_pte_lookup(struct vm_area_struct *vma,
+				 unsigned long vaddr, int write,
+				 unsigned long *paddr, int *pageshift)
+{
+	struct page *page;
+
+	/* ZZZ Need to handle HUGE pages */
+	if (is_vm_hugetlb_page(vma))
+		return -EFAULT;
+	*pageshift = PAGE_SHIFT;
+	if (get_user_pages
+	    (current, current->mm, vaddr, 1, write, 0, &page, NULL) <= 0)
+		return -EFAULT;
+	*paddr = page_to_phys(page);
+	put_page(page);
+	return 0;
+}
+
+/*
+ *
+ * atomic_pte_lookup
+ *
+ * Convert a user virtual address to a physical address
+ * Only supports Intel large pages (2MB only) on x86_64.
+ *	ZZZ - hugepage support is incomplete
+ */
+static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr,
+	int write, unsigned long *paddr, int *pageshift)
+{
+	pgd_t *pgdp;
+	pmd_t *pmdp;
+	pud_t *pudp;
+	pte_t pte;
+
+	WARN_ON(irqs_disabled());		/* ZZZ debug */
+
+	local_irq_disable();
+	pgdp = pgd_offset(vma->vm_mm, vaddr);
+	if (unlikely(pgd_none(*pgdp)))
+		goto err;
+
+	pudp = pud_offset(pgdp, vaddr);
+	if (unlikely(pud_none(*pudp)))
+		goto err;
+
+	pmdp = pmd_offset(pudp, vaddr);
+	if (unlikely(pmd_none(*pmdp)))
+		goto err;
+#ifdef CONFIG_X86_64
+	if (unlikely(pmd_large(*pmdp)))
+		pte = *(pte_t *) pmdp;
+	else
+#endif
+		pte = *pte_offset_kernel(pmdp, vaddr);
+
+	local_irq_enable();
+
+	if (unlikely(!pte_present(pte) ||
+		     (write && (!pte_write(pte) || !pte_dirty(pte)))))
+		return 1;
+
+	*paddr = pte_pfn(pte) << PAGE_SHIFT;
+	*pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT;
+	return 0;
+
+err:
+	local_irq_enable();
+	return 1;
+}
+
+/*
+ * Drop a TLB entry into the GRU. The fault is described by info in an TFH.
+ *	Input:
+ *		cb    Address of user CBR. Null if not running in user context
+ * 	Return:
+ * 		  0 = dropin, exception, or switch to UPM successful
+ * 		  1 = range invalidate active
+ * 		< 0 = error code
+ *
+ */
+static int gru_try_dropin(struct gru_thread_state *gts,
+			  struct gru_tlb_fault_handle *tfh,
+			  unsigned long __user *cb)
+{
+	struct mm_struct *mm = gts->ts_mm;
+	struct vm_area_struct *vma;
+	int pageshift, asid, write, ret;
+	unsigned long paddr, gpa, vaddr;
+
+	/*
+	 * NOTE: The GRU contains magic hardware that eliminates races between
+	 * TLB invalidates and TLB dropins. If an invalidate occurs
+	 * in the window between reading the TFH and the subsequent TLB dropin,
+	 * the dropin is ignored. This eliminates the need for additional locks.
+	 */
+
+	/*
+	 * Error if TFH state is IDLE or FMM mode & the user issuing a UPM call.
+	 * Might be a hardware race OR a stupid user. Ignore FMM because FMM
+	 * is a transient state.
+	 */
+	if (tfh->state == TFHSTATE_IDLE)
+		goto failidle;
+	if (tfh->state == TFHSTATE_MISS_FMM && cb)
+		goto failfmm;
+
+	write = (tfh->cause & TFHCAUSE_TLB_MOD) != 0;
+	vaddr = tfh->missvaddr;
+	asid = tfh->missasid;
+	if (asid == 0)
+		goto failnoasid;
+
+	rmb();	/* TFH must be cache resident before reading ms_range_active */
+
+	/*
+	 * TFH is cache resident - at least briefly. Fail the dropin
+	 * if a range invalidate is active.
+	 */
+	if (atomic_read(&gts->ts_gms->ms_range_active))
+		goto failactive;
+
+	vma = find_vma(mm, vaddr);
+	if (!vma)
+		goto failinval;
+
+	/*
+	 * Atomic lookup is faster & usually works even if called in non-atomic
+	 * context.
+	 */
+	ret = atomic_pte_lookup(vma, vaddr, write, &paddr, &pageshift);
+	if (ret) {
+		if (!cb)
+			goto failupm;
+		if (non_atomic_pte_lookup(vma, vaddr, write, &paddr,
+					  &pageshift))
+			goto failinval;
+	}
+	if (is_gru_paddr(paddr))
+		goto failinval;
+
+	paddr = paddr & ~((1UL << pageshift) - 1);
+	gpa = uv_soc_phys_ram_to_gpa(paddr);
+	gru_cb_set_istatus_active(cb);
+	tfh_write_restart(tfh, gpa, GAA_RAM, vaddr, asid, write,
+			  GRU_PAGESIZE(pageshift));
+	STAT(tlb_dropin);
+	gru_dbg(grudev,
+		"%s: tfh 0x%p, vaddr 0x%lx, asid 0x%x, ps %d, gpa 0x%lx\n",
+		ret ? "non-atomic" : "atomic", tfh, vaddr, asid,
+		pageshift, gpa);
+	return 0;
+
+failnoasid:
+	/* No asid (delayed unload). */
+	STAT(tlb_dropin_fail_no_asid);
+	gru_dbg(grudev, "FAILED no_asid tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+	if (!cb)
+		tfh_user_polling_mode(tfh);
+	else
+		gru_flush_cache(tfh);
+	return -EAGAIN;
+
+failupm:
+	/* Atomic failure switch CBR to UPM */
+	tfh_user_polling_mode(tfh);
+	STAT(tlb_dropin_fail_upm);
+	gru_dbg(grudev, "FAILED upm tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+	return 1;
+
+failfmm:
+	/* FMM state on UPM call */
+	STAT(tlb_dropin_fail_fmm);
+	gru_dbg(grudev, "FAILED fmm tfh: 0x%p, state %d\n", tfh, tfh->state);
+	return 0;
+
+failidle:
+	/* TFH was idle  - no miss pending */
+	gru_flush_cache(tfh);
+	if (cb)
+		gru_flush_cache(cb);
+	STAT(tlb_dropin_fail_idle);
+	gru_dbg(grudev, "FAILED idle tfh: 0x%p, state %d\n", tfh, tfh->state);
+	return 0;
+
+failinval:
+	/* All errors (atomic & non-atomic) switch CBR to EXCEPTION state */
+	tfh_exception(tfh);
+	STAT(tlb_dropin_fail_invalid);
+	gru_dbg(grudev, "FAILED inval tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+	return -EFAULT;
+
+failactive:
+	/* Range invalidate active. Switch to UPM iff atomic */
+	if (!cb)
+		tfh_user_polling_mode(tfh);
+	else
+		gru_flush_cache(tfh);
+	STAT(tlb_dropin_fail_range_active);
+	gru_dbg(grudev, "FAILED range active: tfh 0x%p, vaddr 0x%lx\n",
+		tfh, vaddr);
+	return 1;
+}
+
+/*
+ * Process an external interrupt from the GRU. This interrupt is
+ * caused by a TLB miss.
+ * Note that this is the interrupt handler that is registered with linux
+ * interrupt handlers.
+ */
+irqreturn_t gru_intr(int irq, void *dev_id)
+{
+	struct gru_state *gru;
+	struct gru_tlb_fault_map map;
+	struct gru_thread_state *gts;
+	struct gru_tlb_fault_handle *tfh = NULL;
+	int cbrnum, ctxnum;
+
+	STAT(intr);
+
+	gru = irq_to_gru(irq);
+	if (!gru) {
+		dev_err(grudev, "GRU: invalid interrupt: cpu %d, irq %d\n",
+			raw_smp_processor_id(), irq);
+		return IRQ_NONE;
+	}
+	get_clear_fault_map(gru, &map);
+	gru_dbg(grudev, "irq %d, gru %x, map 0x%lx\n", irq, gru->gs_gid,
+		map.fault_bits[0]);
+
+	for_each_cbr_in_tfm(cbrnum, map.fault_bits) {
+		tfh = get_tfh_by_index(gru, cbrnum);
+		prefetchw(tfh);	/* Helps on hdw, required for emulator */
+
+		/*
+		 * When hardware sets a bit in the faultmap, it implicitly
+		 * locks the GRU context so that it cannot be unloaded.
+		 * The gts cannot change until a TFH start/writestart command
+		 * is issued.
+		 */
+		ctxnum = tfh->ctxnum;
+		gts = gru->gs_gts[ctxnum];
+
+		/*
+		 * This is running in interrupt context. Trylock the mmap_sem.
+		 * If it fails, retry the fault in user context.
+		 */
+		if (down_read_trylock(&gts->ts_mm->mmap_sem)) {
+			gru_try_dropin(gts, tfh, NULL);
+			up_read(&gts->ts_mm->mmap_sem);
+		} else {
+			tfh_user_polling_mode(tfh);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+
+static int gru_user_dropin(struct gru_thread_state *gts,
+			   struct gru_tlb_fault_handle *tfh,
+			   unsigned long __user *cb)
+{
+	struct gru_mm_struct *gms = gts->ts_gms;
+	int ret;
+
+	while (1) {
+		wait_event(gms->ms_wait_queue,
+			   atomic_read(&gms->ms_range_active) == 0);
+		prefetchw(tfh);	/* Helps on hdw, required for emulator */
+		ret = gru_try_dropin(gts, tfh, cb);
+		if (ret <= 0)
+			return ret;
+		STAT(call_os_wait_queue);
+	}
+}
+
+/*
+ * This interface is called as a result of a user detecting a "call OS" bit
+ * in a user CB. Normally means that a TLB fault has occurred.
+ * 	cb - user virtual address of the CB
+ */
+int gru_handle_user_call_os(unsigned long cb)
+{
+	struct gru_tlb_fault_handle *tfh;
+	struct gru_thread_state *gts;
+	unsigned long __user *cbp;
+	int ucbnum, cbrnum, ret = -EINVAL;
+
+	STAT(call_os);
+	gru_dbg(grudev, "address 0x%lx\n", cb);
+
+	/* sanity check the cb pointer */
+	ucbnum = get_cb_number((void *)cb);
+	if ((cb & (GRU_HANDLE_STRIDE - 1)) || ucbnum >= GRU_NUM_CB)
+		return -EINVAL;
+	cbp = (unsigned long *)cb;
+
+	gts = gru_find_lock_gts(cb);
+	if (!gts)
+		return -EINVAL;
+
+	if (ucbnum >= gts->ts_cbr_au_count * GRU_CBR_AU_SIZE) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/*
+	 * If force_unload is set, the UPM TLB fault is phony. The task
+	 * has migrated to another node and the GSEG must be moved. Just
+	 * unload the context. The task will page fault and assign a new
+	 * context.
+	 */
+	ret = -EAGAIN;
+	cbrnum = thread_cbr_number(gts, ucbnum);
+	if (gts->ts_force_unload) {
+		gru_unload_context(gts, 1);
+	} else if (gts->ts_gru) {
+		tfh = get_tfh_by_index(gts->ts_gru, cbrnum);
+		ret = gru_user_dropin(gts, tfh, cbp);
+	}
+exit:
+	gru_unlock_gts(gts);
+	return ret;
+}
+
+/*
+ * Fetch the exception detail information for a CB that terminated with
+ * an exception.
+ */
+int gru_get_exception_detail(unsigned long arg)
+{
+	struct control_block_extended_exc_detail excdet;
+	struct gru_control_block_extended *cbe;
+	struct gru_thread_state *gts;
+	int ucbnum, cbrnum, ret;
+
+	STAT(user_exception);
+	if (copy_from_user(&excdet, (void __user *)arg, sizeof(excdet)))
+		return -EFAULT;
+
+	gru_dbg(grudev, "address 0x%lx\n", excdet.cb);
+	gts = gru_find_lock_gts(excdet.cb);
+	if (!gts)
+		return -EINVAL;
+
+	if (gts->ts_gru) {
+		ucbnum = get_cb_number((void *)excdet.cb);
+		cbrnum = thread_cbr_number(gts, ucbnum);
+		cbe = get_cbe_by_index(gts->ts_gru, cbrnum);
+		excdet.opc = cbe->opccpy;
+		excdet.exopc = cbe->exopccpy;
+		excdet.ecause = cbe->ecause;
+		excdet.exceptdet0 = cbe->idef1upd;
+		excdet.exceptdet1 = cbe->idef3upd;
+		ret = 0;
+	} else {
+		ret = -EAGAIN;
+	}
+	gru_unlock_gts(gts);
+
+	gru_dbg(grudev, "address 0x%lx, ecause 0x%x\n", excdet.cb,
+		excdet.ecause);
+	if (!ret && copy_to_user((void __user *)arg, &excdet, sizeof(excdet)))
+		ret = -EFAULT;
+	return ret;
+}
+
+/*
+ * User request to unload a context. Content is saved for possible reload.
+ */
+int gru_user_unload_context(unsigned long arg)
+{
+	struct gru_thread_state *gts;
+	struct gru_unload_context_req req;
+
+	STAT(user_unload_context);
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	gru_dbg(grudev, "gseg 0x%lx\n", req.gseg);
+
+	gts = gru_find_lock_gts(req.gseg);
+	if (!gts)
+		return -EINVAL;
+
+	if (gts->ts_gru)
+		gru_unload_context(gts, 1);
+	gru_unlock_gts(gts);
+
+	return 0;
+}
+
+/*
+ * User request to flush a range of virtual addresses from the GRU TLB
+ * (Mainly for testing).
+ */
+int gru_user_flush_tlb(unsigned long arg)
+{
+	struct gru_thread_state *gts;
+	struct gru_flush_tlb_req req;
+
+	STAT(user_flush_tlb);
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	gru_dbg(grudev, "gseg 0x%lx, vaddr 0x%lx, len 0x%lx\n", req.gseg,
+		req.vaddr, req.len);
+
+	gts = gru_find_lock_gts(req.gseg);
+	if (!gts)
+		return -EINVAL;
+
+	gru_flush_tlb_range(gts->ts_gms, req.vaddr, req.vaddr + req.len);
+	gru_unlock_gts(gts);
+
+	return 0;
+}
+
+/*
+ * Register the current task as the user of the GSEG slice.
+ * Needed for TLB fault interrupt targeting.
+ */
+int gru_set_task_slice(long address)
+{
+	struct gru_thread_state *gts;
+
+	STAT(set_task_slice);
+	gru_dbg(grudev, "address 0x%lx\n", address);
+	gts = gru_alloc_locked_gts(address);
+	if (!gts)
+		return -EINVAL;
+
+	gts->ts_tgid_owner = current->tgid;
+	gru_unlock_gts(gts);
+
+	return 0;
+}
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
new file mode 100644
index 00000000000..d61cee796ef
--- /dev/null
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -0,0 +1,488 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              FILE OPERATIONS & DRIVER INITIALIZATION
+ *
+ * This file supports the user system call for file open, close, mmap, etc.
+ * This also incudes the driver initialization code.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+
+#if defined CONFIG_X86_64
+#include <asm/genapic.h>
+#include <asm/irq.h>
+#define IS_UV()		is_uv_system()
+#elif defined CONFIG_IA64
+#include <asm/system.h>
+#include <asm/sn/simulator.h>
+/* temp support for running on hardware simulator */
+#define IS_UV()		IS_MEDUSA() || ia64_platform_is("uv")
+#else
+#define IS_UV()		0
+#endif
+
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_mmrs.h>
+
+struct gru_blade_state *gru_base[GRU_MAX_BLADES] __read_mostly;
+unsigned long gru_start_paddr, gru_end_paddr __read_mostly;
+struct gru_stats_s gru_stats;
+
+/* Guaranteed user available resources on each node */
+static int max_user_cbrs, max_user_dsr_bytes;
+
+static struct file_operations gru_fops;
+static struct miscdevice gru_miscdev;
+
+
+/*
+ * gru_vma_close
+ *
+ * Called when unmapping a device mapping. Frees all gru resources
+ * and tables belonging to the vma.
+ */
+static void gru_vma_close(struct vm_area_struct *vma)
+{
+	struct gru_vma_data *vdata;
+	struct gru_thread_state *gts;
+	struct list_head *entry, *next;
+
+	if (!vma->vm_private_data)
+		return;
+
+	vdata = vma->vm_private_data;
+	vma->vm_private_data = NULL;
+	gru_dbg(grudev, "vma %p, file %p, vdata %p\n", vma, vma->vm_file,
+				vdata);
+	list_for_each_safe(entry, next, &vdata->vd_head) {
+		gts =
+		    list_entry(entry, struct gru_thread_state, ts_next);
+		list_del(&gts->ts_next);
+		mutex_lock(&gts->ts_ctxlock);
+		if (gts->ts_gru)
+			gru_unload_context(gts, 0);
+		mutex_unlock(&gts->ts_ctxlock);
+		gts_drop(gts);
+	}
+	kfree(vdata);
+	STAT(vdata_free);
+}
+
+/*
+ * gru_file_mmap
+ *
+ * Called when mmaping the device.  Initializes the vma with a fault handler
+ * and private data structure necessary to allocate, track, and free the
+ * underlying pages.
+ */
+static int gru_file_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	if ((vma->vm_flags & (VM_SHARED | VM_WRITE)) != (VM_SHARED | VM_WRITE))
+		return -EPERM;
+
+	if (vma->vm_start & (GRU_GSEG_PAGESIZE - 1) ||
+			vma->vm_end & (GRU_GSEG_PAGESIZE - 1))
+		return -EINVAL;
+
+	vma->vm_flags |=
+	    (VM_IO | VM_DONTCOPY | VM_LOCKED | VM_DONTEXPAND | VM_PFNMAP |
+			VM_RESERVED);
+	vma->vm_page_prot = PAGE_SHARED;
+	vma->vm_ops = &gru_vm_ops;
+
+	vma->vm_private_data = gru_alloc_vma_data(vma, 0);
+	if (!vma->vm_private_data)
+		return -ENOMEM;
+
+	gru_dbg(grudev, "file %p, vaddr 0x%lx, vma %p, vdata %p\n",
+		file, vma->vm_start, vma, vma->vm_private_data);
+	return 0;
+}
+
+/*
+ * Create a new GRU context
+ */
+static int gru_create_new_context(unsigned long arg)
+{
+	struct gru_create_context_req req;
+	struct vm_area_struct *vma;
+	struct gru_vma_data *vdata;
+	int ret = -EINVAL;
+
+
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	if (req.data_segment_bytes == 0 ||
+				req.data_segment_bytes > max_user_dsr_bytes)
+		return -EINVAL;
+	if (!req.control_blocks || !req.maximum_thread_count ||
+				req.control_blocks > max_user_cbrs)
+		return -EINVAL;
+
+	if (!(req.options & GRU_OPT_MISS_MASK))
+		req.options |= GRU_OPT_MISS_FMM_INTR;
+
+	down_write(&current->mm->mmap_sem);
+	vma = gru_find_vma(req.gseg);
+	if (vma) {
+		vdata = vma->vm_private_data;
+		vdata->vd_user_options = req.options;
+		vdata->vd_dsr_au_count =
+		    GRU_DS_BYTES_TO_AU(req.data_segment_bytes);
+		vdata->vd_cbr_au_count = GRU_CB_COUNT_TO_AU(req.control_blocks);
+		ret = 0;
+	}
+	up_write(&current->mm->mmap_sem);
+
+	return ret;
+}
+
+/*
+ * Get GRU configuration info (temp - for emulator testing)
+ */
+static long gru_get_config_info(unsigned long arg)
+{
+	struct gru_config_info info;
+	int nodesperblade;
+
+	if (num_online_nodes() > 1 &&
+			(uv_node_to_blade_id(1) == uv_node_to_blade_id(0)))
+		nodesperblade = 2;
+	else
+		nodesperblade = 1;
+	info.cpus = num_online_cpus();
+	info.nodes = num_online_nodes();
+	info.blades = info.nodes / nodesperblade;
+	info.chiplets = GRU_CHIPLETS_PER_BLADE * info.blades;
+
+	if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+		return -EFAULT;
+	return 0;
+}
+
+/*
+ * Get GRU chiplet status
+ */
+static long gru_get_chiplet_status(unsigned long arg)
+{
+	struct gru_state *gru;
+	struct gru_chiplet_info info;
+
+	if (copy_from_user(&info, (void __user *)arg, sizeof(info)))
+		return -EFAULT;
+
+	if (info.node == -1)
+		info.node = numa_node_id();
+	if (info.node >= num_possible_nodes() ||
+			info.chiplet >= GRU_CHIPLETS_PER_HUB ||
+			info.node < 0 || info.chiplet < 0)
+		return -EINVAL;
+
+	info.blade = uv_node_to_blade_id(info.node);
+	gru = get_gru(info.blade, info.chiplet);
+
+	info.total_dsr_bytes = GRU_NUM_DSR_BYTES;
+	info.total_cbr = GRU_NUM_CB;
+	info.total_user_dsr_bytes = GRU_NUM_DSR_BYTES -
+		gru->gs_reserved_dsr_bytes;
+	info.total_user_cbr = GRU_NUM_CB - gru->gs_reserved_cbrs;
+	info.free_user_dsr_bytes = hweight64(gru->gs_dsr_map) *
+			GRU_DSR_AU_BYTES;
+	info.free_user_cbr = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+
+	if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+		return -EFAULT;
+	return 0;
+}
+
+/*
+ * gru_file_unlocked_ioctl
+ *
+ * Called to update file attributes via IOCTL calls.
+ */
+static long gru_file_unlocked_ioctl(struct file *file, unsigned int req,
+				    unsigned long arg)
+{
+	int err = -EBADRQC;
+
+	gru_dbg(grudev, "file %p\n", file);
+
+	switch (req) {
+	case GRU_CREATE_CONTEXT:
+		err = gru_create_new_context(arg);
+		break;
+	case GRU_SET_TASK_SLICE:
+		err = gru_set_task_slice(arg);
+		break;
+	case GRU_USER_GET_EXCEPTION_DETAIL:
+		err = gru_get_exception_detail(arg);
+		break;
+	case GRU_USER_UNLOAD_CONTEXT:
+		err = gru_user_unload_context(arg);
+		break;
+	case GRU_GET_CHIPLET_STATUS:
+		err = gru_get_chiplet_status(arg);
+		break;
+	case GRU_USER_FLUSH_TLB:
+		err = gru_user_flush_tlb(arg);
+		break;
+	case GRU_USER_CALL_OS:
+		err = gru_handle_user_call_os(arg);
+		break;
+	case GRU_GET_CONFIG_INFO:
+		err = gru_get_config_info(arg);
+		break;
+	}
+	return err;
+}
+
+/*
+ * Called at init time to build tables for all GRUs that are present in the
+ * system.
+ */
+static void gru_init_chiplet(struct gru_state *gru, unsigned long paddr,
+			     void *vaddr, int nid, int bid, int grunum)
+{
+	spin_lock_init(&gru->gs_lock);
+	spin_lock_init(&gru->gs_asid_lock);
+	gru->gs_gru_base_paddr = paddr;
+	gru->gs_gru_base_vaddr = vaddr;
+	gru->gs_gid = bid * GRU_CHIPLETS_PER_BLADE + grunum;
+	gru->gs_blade = gru_base[bid];
+	gru->gs_blade_id = bid;
+	gru->gs_cbr_map = (GRU_CBR_AU == 64) ? ~0 : (1UL << GRU_CBR_AU) - 1;
+	gru->gs_dsr_map = (1UL << GRU_DSR_AU) - 1;
+	gru_tgh_flush_init(gru);
+	gru_dbg(grudev, "bid %d, nid %d, gru %x, vaddr %p (0x%lx)\n",
+		bid, nid, gru->gs_gid, gru->gs_gru_base_vaddr,
+		gru->gs_gru_base_paddr);
+	gru_kservices_init(gru);
+}
+
+static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr)
+{
+	int pnode, nid, bid, chip;
+	int cbrs, dsrbytes, n;
+	int order = get_order(sizeof(struct gru_blade_state));
+	struct page *page;
+	struct gru_state *gru;
+	unsigned long paddr;
+	void *vaddr;
+
+	max_user_cbrs = GRU_NUM_CB;
+	max_user_dsr_bytes = GRU_NUM_DSR_BYTES;
+	for_each_online_node(nid) {
+		bid = uv_node_to_blade_id(nid);
+		pnode = uv_node_to_pnode(nid);
+		if (gru_base[bid])
+			continue;
+		page = alloc_pages_node(nid, GFP_KERNEL, order);
+		if (!page)
+			goto fail;
+		gru_base[bid] = page_address(page);
+		memset(gru_base[bid], 0, sizeof(struct gru_blade_state));
+		gru_base[bid]->bs_lru_gru = &gru_base[bid]->bs_grus[0];
+		spin_lock_init(&gru_base[bid]->bs_lock);
+
+		dsrbytes = 0;
+		cbrs = 0;
+		for (gru = gru_base[bid]->bs_grus, chip = 0;
+		     		chip < GRU_CHIPLETS_PER_BLADE;
+				chip++, gru++) {
+			paddr = gru_chiplet_paddr(gru_base_paddr, pnode, chip);
+			vaddr = gru_chiplet_vaddr(gru_base_vaddr, pnode, chip);
+			gru_init_chiplet(gru, paddr, vaddr, bid, nid, chip);
+			n = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+			cbrs = max(cbrs, n);
+			n = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES;
+			dsrbytes = max(dsrbytes, n);
+		}
+		max_user_cbrs = min(max_user_cbrs, cbrs);
+		max_user_dsr_bytes = min(max_user_dsr_bytes, dsrbytes);
+	}
+
+	return 0;
+
+fail:
+	for (nid--; nid >= 0; nid--)
+		free_pages((unsigned long)gru_base[nid], order);
+	return -ENOMEM;
+}
+
+#ifdef CONFIG_IA64
+
+static int get_base_irq(void)
+{
+	return IRQ_GRU;
+}
+
+#elif defined CONFIG_X86_64
+
+static void noop(unsigned int irq)
+{
+}
+
+static struct irq_chip gru_chip = {
+	.name		= "gru",
+	.mask		= noop,
+	.unmask		= noop,
+	.ack		= noop,
+};
+
+static int get_base_irq(void)
+{
+	set_irq_chip(IRQ_GRU, &gru_chip);
+	set_irq_chip(IRQ_GRU + 1, &gru_chip);
+	return IRQ_GRU;
+}
+#endif
+
+/*
+ * gru_init
+ *
+ * Called at boot or module load time to initialize the GRUs.
+ */
+static int __init gru_init(void)
+{
+	int ret, irq, chip;
+	char id[10];
+	void *gru_start_vaddr;
+
+	if (!IS_UV())
+		return 0;
+
+#if defined CONFIG_IA64
+	gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */
+#else
+	gru_start_paddr = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR) &
+				0x7fffffffffffUL;
+
+#endif
+	gru_start_vaddr = __va(gru_start_paddr);
+	gru_end_paddr = gru_start_paddr + MAX_NUMNODES * GRU_SIZE;
+	printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n",
+	       gru_start_paddr, gru_end_paddr);
+	irq = get_base_irq();
+	for (chip = 0; chip < GRU_CHIPLETS_PER_BLADE; chip++) {
+		ret = request_irq(irq + chip, gru_intr, 0, id, NULL);
+		if (ret) {
+			printk(KERN_ERR "%s: request_irq failed\n",
+			       GRU_DRIVER_ID_STR);
+			goto exit1;
+		}
+	}
+
+	ret = misc_register(&gru_miscdev);
+	if (ret) {
+		printk(KERN_ERR "%s: misc_register failed\n",
+		       GRU_DRIVER_ID_STR);
+		goto exit1;
+	}
+
+	ret = gru_proc_init();
+	if (ret) {
+		printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR);
+		goto exit2;
+	}
+
+	ret = gru_init_tables(gru_start_paddr, gru_start_vaddr);
+	if (ret) {
+		printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR);
+		goto exit3;
+	}
+
+	printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR,
+	       GRU_DRIVER_VERSION_STR);
+	return 0;
+
+exit3:
+	gru_proc_exit();
+exit2:
+	misc_deregister(&gru_miscdev);
+exit1:
+	for (--chip; chip >= 0; chip--)
+		free_irq(irq + chip, NULL);
+	return ret;
+
+}
+
+static void __exit gru_exit(void)
+{
+	int i, bid;
+	int order = get_order(sizeof(struct gru_state) *
+			      GRU_CHIPLETS_PER_BLADE);
+
+	if (!IS_UV())
+		return;
+
+	for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
+		free_irq(IRQ_GRU + i, NULL);
+
+	for (bid = 0; bid < GRU_MAX_BLADES; bid++)
+		free_pages((unsigned long)gru_base[bid], order);
+
+	misc_deregister(&gru_miscdev);
+	gru_proc_exit();
+}
+
+static struct file_operations gru_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= gru_file_unlocked_ioctl,
+	.mmap		= gru_file_mmap,
+};
+
+static struct miscdevice gru_miscdev = {
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= "gru",
+	.fops		= &gru_fops,
+};
+
+struct vm_operations_struct gru_vm_ops = {
+	.close		= gru_vma_close,
+	.fault		= gru_fault,
+};
+
+module_init(gru_init);
+module_exit(gru_exit);
+
+module_param(gru_options, ulong, 0644);
+MODULE_PARM_DESC(gru_options, "Various debug options");
+
+MODULE_AUTHOR("Silicon Graphics, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(GRU_DRIVER_ID_STR GRU_DRIVER_VERSION_STR);
+MODULE_VERSION(GRU_DRIVER_VERSION_STR);
+
diff --git a/drivers/misc/sgi-gru/gruhandles.h b/drivers/misc/sgi-gru/gruhandles.h
new file mode 100644
index 00000000000..d16031d6267
--- /dev/null
+++ b/drivers/misc/sgi-gru/gruhandles.h
@@ -0,0 +1,663 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              GRU HANDLE DEFINITION
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRUHANDLES_H__
+#define __GRUHANDLES_H__
+#include "gru_instructions.h"
+
+/*
+ * Manifest constants for GRU Memory Map
+ */
+#define GRU_GSEG0_BASE		0
+#define GRU_MCS_BASE		(64 * 1024 * 1024)
+#define GRU_SIZE		(128UL * 1024 * 1024)
+
+/* Handle & resource counts */
+#define GRU_NUM_CB		128
+#define GRU_NUM_DSR_BYTES	(32 * 1024)
+#define GRU_NUM_TFM		16
+#define GRU_NUM_TGH		24
+#define GRU_NUM_CBE		128
+#define GRU_NUM_TFH		128
+#define GRU_NUM_CCH		16
+#define GRU_NUM_GSH		1
+
+/* Maximum resource counts that can be reserved by user programs */
+#define GRU_NUM_USER_CBR	GRU_NUM_CBE
+#define GRU_NUM_USER_DSR_BYTES	GRU_NUM_DSR_BYTES
+
+/* Bytes per handle & handle stride. Code assumes all cb, tfh, cbe handles
+ * are the same */
+#define GRU_HANDLE_BYTES	64
+#define GRU_HANDLE_STRIDE	256
+
+/* Base addresses of handles */
+#define GRU_TFM_BASE		(GRU_MCS_BASE + 0x00000)
+#define GRU_TGH_BASE		(GRU_MCS_BASE + 0x08000)
+#define GRU_CBE_BASE		(GRU_MCS_BASE + 0x10000)
+#define GRU_TFH_BASE		(GRU_MCS_BASE + 0x18000)
+#define GRU_CCH_BASE		(GRU_MCS_BASE + 0x20000)
+#define GRU_GSH_BASE		(GRU_MCS_BASE + 0x30000)
+
+/* User gseg constants */
+#define GRU_GSEG_STRIDE		(4 * 1024 * 1024)
+#define GSEG_BASE(a)		((a) & ~(GRU_GSEG_PAGESIZE - 1))
+
+/* Data segment constants */
+#define GRU_DSR_AU_BYTES	1024
+#define GRU_DSR_CL		(GRU_NUM_DSR_BYTES / GRU_CACHE_LINE_BYTES)
+#define GRU_DSR_AU_CL		(GRU_DSR_AU_BYTES / GRU_CACHE_LINE_BYTES)
+#define GRU_DSR_AU		(GRU_NUM_DSR_BYTES / GRU_DSR_AU_BYTES)
+
+/* Control block constants */
+#define GRU_CBR_AU_SIZE		2
+#define GRU_CBR_AU		(GRU_NUM_CBE / GRU_CBR_AU_SIZE)
+
+/* Convert resource counts to the number of AU */
+#define GRU_DS_BYTES_TO_AU(n)	DIV_ROUND_UP(n, GRU_DSR_AU_BYTES)
+#define GRU_CB_COUNT_TO_AU(n)	DIV_ROUND_UP(n, GRU_CBR_AU_SIZE)
+
+/* UV limits */
+#define GRU_CHIPLETS_PER_HUB	2
+#define GRU_HUBS_PER_BLADE	1
+#define GRU_CHIPLETS_PER_BLADE	(GRU_HUBS_PER_BLADE * GRU_CHIPLETS_PER_HUB)
+
+/* User GRU Gseg offsets */
+#define GRU_CB_BASE		0
+#define GRU_CB_LIMIT		(GRU_CB_BASE + GRU_HANDLE_STRIDE * GRU_NUM_CBE)
+#define GRU_DS_BASE		0x20000
+#define GRU_DS_LIMIT		(GRU_DS_BASE + GRU_NUM_DSR_BYTES)
+
+/* Convert a GRU physical address to the chiplet offset */
+#define GSEGPOFF(h) 		((h) & (GRU_SIZE - 1))
+
+/* Convert an arbitrary handle address to the beginning of the GRU segment */
+#ifndef __PLUGIN__
+#define GRUBASE(h)		((void *)((unsigned long)(h) & ~(GRU_SIZE - 1)))
+#else
+extern void *gmu_grubase(void *h);
+#define GRUBASE(h)		gmu_grubase(h)
+#endif
+
+/* General addressing macros. */
+static inline void *get_gseg_base_address(void *base, int ctxnum)
+{
+	return (void *)(base + GRU_GSEG0_BASE + GRU_GSEG_STRIDE * ctxnum);
+}
+
+static inline void *get_gseg_base_address_cb(void *base, int ctxnum, int line)
+{
+	return (void *)(get_gseg_base_address(base, ctxnum) +
+			GRU_CB_BASE + GRU_HANDLE_STRIDE * line);
+}
+
+static inline void *get_gseg_base_address_ds(void *base, int ctxnum, int line)
+{
+	return (void *)(get_gseg_base_address(base, ctxnum) + GRU_DS_BASE +
+			GRU_CACHE_LINE_BYTES * line);
+}
+
+static inline struct gru_tlb_fault_map *get_tfm(void *base, int ctxnum)
+{
+	return (struct gru_tlb_fault_map *)(base + GRU_TFM_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_tlb_global_handle *get_tgh(void *base, int ctxnum)
+{
+	return (struct gru_tlb_global_handle *)(base + GRU_TGH_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_control_block_extended *get_cbe(void *base, int ctxnum)
+{
+	return (struct gru_control_block_extended *)(base + GRU_CBE_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_tlb_fault_handle *get_tfh(void *base, int ctxnum)
+{
+	return (struct gru_tlb_fault_handle *)(base + GRU_TFH_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_context_configuration_handle *get_cch(void *base,
+					int ctxnum)
+{
+	return (struct gru_context_configuration_handle *)(base +
+				GRU_CCH_BASE + ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline unsigned long get_cb_number(void *cb)
+{
+	return (((unsigned long)cb - GRU_CB_BASE) % GRU_GSEG_PAGESIZE) /
+					GRU_HANDLE_STRIDE;
+}
+
+/* byte offset to a specific GRU chiplet. (p=pnode, c=chiplet (0 or 1)*/
+static inline unsigned long gru_chiplet_paddr(unsigned long paddr, int pnode,
+							int chiplet)
+{
+	return paddr + GRU_SIZE * (2 * pnode  + chiplet);
+}
+
+static inline void *gru_chiplet_vaddr(void *vaddr, int pnode, int chiplet)
+{
+	return vaddr + GRU_SIZE * (2 * pnode  + chiplet);
+}
+
+
+
+/*
+ * Global TLB Fault Map
+ * 	Bitmap of outstanding TLB misses needing interrupt/polling service.
+ *
+ */
+struct gru_tlb_fault_map {
+	unsigned long fault_bits[BITS_TO_LONGS(GRU_NUM_CBE)];
+	unsigned long fill0[2];
+	unsigned long done_bits[BITS_TO_LONGS(GRU_NUM_CBE)];
+	unsigned long fill1[2];
+};
+
+/*
+ * TGH - TLB Global Handle
+ * 	Used for TLB flushing.
+ *
+ */
+struct gru_tlb_global_handle {
+	unsigned int cmd:1;		/* DW 0 */
+	unsigned int delresp:1;
+	unsigned int opc:1;
+	unsigned int fill1:5;
+
+	unsigned int fill2:8;
+
+	unsigned int status:2;
+	unsigned long fill3:2;
+	unsigned int state:3;
+	unsigned long fill4:1;
+
+	unsigned int cause:3;
+	unsigned long fill5:37;
+
+	unsigned long vaddr:64;		/* DW 1 */
+
+	unsigned int asid:24;		/* DW 2 */
+	unsigned int fill6:8;
+
+	unsigned int pagesize:5;
+	unsigned int fill7:11;
+
+	unsigned int global:1;
+	unsigned int fill8:15;
+
+	unsigned long vaddrmask:39;	/* DW 3 */
+	unsigned int fill9:9;
+	unsigned int n:10;
+	unsigned int fill10:6;
+
+	unsigned int ctxbitmap:16;	/* DW4 */
+	unsigned long fill11[3];
+};
+
+enum gru_tgh_cmd {
+	TGHCMD_START
+};
+
+enum gru_tgh_opc {
+	TGHOP_TLBNOP,
+	TGHOP_TLBINV
+};
+
+enum gru_tgh_status {
+	TGHSTATUS_IDLE,
+	TGHSTATUS_EXCEPTION,
+	TGHSTATUS_ACTIVE
+};
+
+enum gru_tgh_state {
+	TGHSTATE_IDLE,
+	TGHSTATE_PE_INVAL,
+	TGHSTATE_INTERRUPT_INVAL,
+	TGHSTATE_WAITDONE,
+	TGHSTATE_RESTART_CTX,
+};
+
+/*
+ * TFH - TLB Global Handle
+ * 	Used for TLB dropins into the GRU TLB.
+ *
+ */
+struct gru_tlb_fault_handle {
+	unsigned int cmd:1;		/* DW 0 - low 32*/
+	unsigned int delresp:1;
+	unsigned int fill0:2;
+	unsigned int opc:3;
+	unsigned int fill1:9;
+
+	unsigned int status:2;
+	unsigned int fill2:1;
+	unsigned int color:1;
+	unsigned int state:3;
+	unsigned int fill3:1;
+
+	unsigned int cause:7;		/* DW 0 - high 32 */
+	unsigned int fill4:1;
+
+	unsigned int indexway:12;
+	unsigned int fill5:4;
+
+	unsigned int ctxnum:4;
+	unsigned int fill6:12;
+
+	unsigned long missvaddr:64;	/* DW 1 */
+
+	unsigned int missasid:24;	/* DW 2 */
+	unsigned int fill7:8;
+	unsigned int fillasid:24;
+	unsigned int dirty:1;
+	unsigned int gaa:2;
+	unsigned long fill8:5;
+
+	unsigned long pfn:41;		/* DW 3 */
+	unsigned int fill9:7;
+	unsigned int pagesize:5;
+	unsigned int fill10:11;
+
+	unsigned long fillvaddr:64;	/* DW 4 */
+
+	unsigned long fill11[3];
+};
+
+enum gru_tfh_opc {
+	TFHOP_NOOP,
+	TFHOP_RESTART,
+	TFHOP_WRITE_ONLY,
+	TFHOP_WRITE_RESTART,
+	TFHOP_EXCEPTION,
+	TFHOP_USER_POLLING_MODE = 7,
+};
+
+enum tfh_status {
+	TFHSTATUS_IDLE,
+	TFHSTATUS_EXCEPTION,
+	TFHSTATUS_ACTIVE,
+};
+
+enum tfh_state {
+	TFHSTATE_INACTIVE,
+	TFHSTATE_IDLE,
+	TFHSTATE_MISS_UPM,
+	TFHSTATE_MISS_FMM,
+	TFHSTATE_HW_ERR,
+	TFHSTATE_WRITE_TLB,
+	TFHSTATE_RESTART_CBR,
+};
+
+/* TFH cause bits */
+enum tfh_cause {
+	TFHCAUSE_NONE,
+	TFHCAUSE_TLB_MISS,
+	TFHCAUSE_TLB_MOD,
+	TFHCAUSE_HW_ERROR_RR,
+	TFHCAUSE_HW_ERROR_MAIN_ARRAY,
+	TFHCAUSE_HW_ERROR_VALID,
+	TFHCAUSE_HW_ERROR_PAGESIZE,
+	TFHCAUSE_INSTRUCTION_EXCEPTION,
+	TFHCAUSE_UNCORRECTIBLE_ERROR,
+};
+
+/* GAA values */
+#define GAA_RAM				0x0
+#define GAA_NCRAM			0x2
+#define GAA_MMIO			0x1
+#define GAA_REGISTER			0x3
+
+/* GRU paddr shift for pfn. (NOTE: shift is NOT by actual pagesize) */
+#define GRU_PADDR_SHIFT			12
+
+/*
+ * Context Configuration handle
+ * 	Used to allocate resources to a GSEG context.
+ *
+ */
+struct gru_context_configuration_handle {
+	unsigned int cmd:1;			/* DW0 */
+	unsigned int delresp:1;
+	unsigned int opc:3;
+	unsigned int unmap_enable:1;
+	unsigned int req_slice_set_enable:1;
+	unsigned int req_slice:2;
+	unsigned int cb_int_enable:1;
+	unsigned int tlb_int_enable:1;
+	unsigned int tfm_fault_bit_enable:1;
+	unsigned int tlb_int_select:4;
+
+	unsigned int status:2;
+	unsigned int state:2;
+	unsigned int reserved2:4;
+
+	unsigned int cause:4;
+	unsigned int tfm_done_bit_enable:1;
+	unsigned int unused:3;
+
+	unsigned int dsr_allocation_map;
+
+	unsigned long cbr_allocation_map;	/* DW1 */
+
+	unsigned int asid[8];			/* DW 2 - 5 */
+	unsigned short sizeavail[8];		/* DW 6 - 7 */
+} __attribute__ ((packed));
+
+enum gru_cch_opc {
+	CCHOP_START = 1,
+	CCHOP_ALLOCATE,
+	CCHOP_INTERRUPT,
+	CCHOP_DEALLOCATE,
+	CCHOP_INTERRUPT_SYNC,
+};
+
+enum gru_cch_status {
+	CCHSTATUS_IDLE,
+	CCHSTATUS_EXCEPTION,
+	CCHSTATUS_ACTIVE,
+};
+
+enum gru_cch_state {
+	CCHSTATE_INACTIVE,
+	CCHSTATE_MAPPED,
+	CCHSTATE_ACTIVE,
+	CCHSTATE_INTERRUPTED,
+};
+
+/* CCH Exception cause */
+enum gru_cch_cause {
+	CCHCAUSE_REGION_REGISTER_WRITE_ERROR = 1,
+	CCHCAUSE_ILLEGAL_OPCODE = 2,
+	CCHCAUSE_INVALID_START_REQUEST = 3,
+	CCHCAUSE_INVALID_ALLOCATION_REQUEST = 4,
+	CCHCAUSE_INVALID_DEALLOCATION_REQUEST = 5,
+	CCHCAUSE_INVALID_INTERRUPT_REQUEST = 6,
+	CCHCAUSE_CCH_BUSY = 7,
+	CCHCAUSE_NO_CBRS_TO_ALLOCATE = 8,
+	CCHCAUSE_BAD_TFM_CONFIG = 9,
+	CCHCAUSE_CBR_RESOURCES_OVERSUBSCRIPED = 10,
+	CCHCAUSE_DSR_RESOURCES_OVERSUBSCRIPED = 11,
+	CCHCAUSE_CBR_DEALLOCATION_ERROR = 12,
+};
+/*
+ * CBE - Control Block Extended
+ * 	Maintains internal GRU state for active CBs.
+ *
+ */
+struct gru_control_block_extended {
+	unsigned int reserved0:1;	/* DW 0  - low */
+	unsigned int imacpy:3;
+	unsigned int reserved1:4;
+	unsigned int xtypecpy:3;
+	unsigned int iaa0cpy:2;
+	unsigned int iaa1cpy:2;
+	unsigned int reserved2:1;
+	unsigned int opccpy:8;
+	unsigned int exopccpy:8;
+
+	unsigned int idef2cpy:22;	/* DW 0  - high */
+	unsigned int reserved3:10;
+
+	unsigned int idef4cpy:22;	/* DW 1 */
+	unsigned int reserved4:10;
+	unsigned int idef4upd:22;
+	unsigned int reserved5:10;
+
+	unsigned long idef1upd:64;	/* DW 2 */
+
+	unsigned long idef5cpy:64;	/* DW 3 */
+
+	unsigned long idef6cpy:64;	/* DW 4 */
+
+	unsigned long idef3upd:64;	/* DW 5 */
+
+	unsigned long idef5upd:64;	/* DW 6 */
+
+	unsigned int idef2upd:22;	/* DW 7 */
+	unsigned int reserved6:10;
+
+	unsigned int ecause:20;
+	unsigned int cbrstate:4;
+	unsigned int cbrexecstatus:8;
+};
+
+enum gru_cbr_state {
+	CBRSTATE_INACTIVE,
+	CBRSTATE_IDLE,
+	CBRSTATE_PE_CHECK,
+	CBRSTATE_QUEUED,
+	CBRSTATE_WAIT_RESPONSE,
+	CBRSTATE_INTERRUPTED,
+	CBRSTATE_INTERRUPTED_MISS_FMM,
+	CBRSTATE_BUSY_INTERRUPT_MISS_FMM,
+	CBRSTATE_INTERRUPTED_MISS_UPM,
+	CBRSTATE_BUSY_INTERRUPTED_MISS_UPM,
+	CBRSTATE_REQUEST_ISSUE,
+	CBRSTATE_BUSY_INTERRUPT,
+};
+
+/* CBE cbrexecstatus bits */
+#define CBR_EXS_ABORT_OCC_BIT			0
+#define CBR_EXS_INT_OCC_BIT			1
+#define CBR_EXS_PENDING_BIT			2
+#define CBR_EXS_QUEUED_BIT			3
+#define CBR_EXS_TLBHW_BIT			4
+#define CBR_EXS_EXCEPTION_BIT			5
+
+#define CBR_EXS_ABORT_OCC			(1 << CBR_EXS_ABORT_OCC_BIT)
+#define CBR_EXS_INT_OCC				(1 << CBR_EXS_INT_OCC_BIT)
+#define CBR_EXS_PENDING				(1 << CBR_EXS_PENDING_BIT)
+#define CBR_EXS_QUEUED				(1 << CBR_EXS_QUEUED_BIT)
+#define CBR_EXS_TLBHW				(1 << CBR_EXS_TLBHW_BIT)
+#define CBR_EXS_EXCEPTION			(1 << CBR_EXS_EXCEPTION_BIT)
+
+/* CBE ecause bits  - defined in gru_instructions.h */
+
+/*
+ * Convert a processor pagesize into the strange encoded pagesize used by the
+ * GRU. Processor pagesize is encoded as log of bytes per page. (or PAGE_SHIFT)
+ * 	pagesize	log pagesize	grupagesize
+ * 	  4k			12	0
+ * 	 16k 			14	1
+ * 	 64k			16	2
+ * 	256k			18	3
+ * 	  1m			20	4
+ * 	  2m			21	5
+ * 	  4m			22	6
+ * 	 16m			24	7
+ * 	 64m			26	8
+ * 	...
+ */
+#define GRU_PAGESIZE(sh)	((((sh) > 20 ? (sh) + 2: (sh)) >> 1) - 6)
+#define GRU_SIZEAVAIL(sh)	(1UL << GRU_PAGESIZE(sh))
+
+/* minimum TLB purge count to ensure a full purge */
+#define GRUMAXINVAL		1024UL
+
+
+/* Extract the status field from a kernel handle */
+#define GET_MSEG_HANDLE_STATUS(h)	(((*(unsigned long *)(h)) >> 16) & 3)
+
+static inline void start_instruction(void *h)
+{
+	unsigned long *w0 = h;
+
+	wmb();		/* setting CMD bit must be last */
+	*w0 = *w0 | 1;
+	gru_flush_cache(h);
+}
+
+static inline int wait_instruction_complete(void *h)
+{
+	int status;
+
+	do {
+		cpu_relax();
+		barrier();
+		status = GET_MSEG_HANDLE_STATUS(h);
+	} while (status == CCHSTATUS_ACTIVE);
+	return status;
+}
+
+#if defined CONFIG_IA64
+static inline void cch_allocate_set_asids(
+		  struct gru_context_configuration_handle *cch, int asidval)
+{
+	int i;
+
+	for (i = 0; i <= RGN_HPAGE; i++) {  /*  assume HPAGE is last region */
+		cch->asid[i] = (asidval++);
+#if 0
+		/* ZZZ hugepages not supported yet */
+		if (i == RGN_HPAGE)
+			cch->sizeavail[i] = GRU_SIZEAVAIL(hpage_shift);
+		else
+#endif
+			cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT);
+	}
+}
+#elif defined CONFIG_X86_64
+static inline void cch_allocate_set_asids(
+		  struct gru_context_configuration_handle *cch, int asidval)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		cch->asid[i] = asidval++;
+		cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT) |
+			GRU_SIZEAVAIL(21);
+	}
+}
+#endif
+
+static inline int cch_allocate(struct gru_context_configuration_handle *cch,
+			       int asidval, unsigned long cbrmap,
+			       unsigned long dsrmap)
+{
+	cch_allocate_set_asids(cch, asidval);
+	cch->dsr_allocation_map = dsrmap;
+	cch->cbr_allocation_map = cbrmap;
+	cch->opc = CCHOP_ALLOCATE;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_start(struct gru_context_configuration_handle *cch)
+{
+	cch->opc = CCHOP_START;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_interrupt(struct gru_context_configuration_handle *cch)
+{
+	cch->opc = CCHOP_INTERRUPT;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_deallocate(struct gru_context_configuration_handle *cch)
+{
+	cch->opc = CCHOP_DEALLOCATE;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_interrupt_sync(struct gru_context_configuration_handle
+				     *cch)
+{
+	cch->opc = CCHOP_INTERRUPT_SYNC;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int tgh_invalidate(struct gru_tlb_global_handle *tgh,
+				 unsigned long vaddr, unsigned long vaddrmask,
+				 int asid, int pagesize, int global, int n,
+				 unsigned short ctxbitmap)
+{
+	tgh->vaddr = vaddr;
+	tgh->asid = asid;
+	tgh->pagesize = pagesize;
+	tgh->n = n;
+	tgh->global = global;
+	tgh->vaddrmask = vaddrmask;
+	tgh->ctxbitmap = ctxbitmap;
+	tgh->opc = TGHOP_TLBINV;
+	start_instruction(tgh);
+	return wait_instruction_complete(tgh);
+}
+
+static inline void tfh_write_only(struct gru_tlb_fault_handle *tfh,
+				  unsigned long pfn, unsigned long vaddr,
+				  int asid, int dirty, int pagesize)
+{
+	tfh->fillasid = asid;
+	tfh->fillvaddr = vaddr;
+	tfh->pfn = pfn;
+	tfh->dirty = dirty;
+	tfh->pagesize = pagesize;
+	tfh->opc = TFHOP_WRITE_ONLY;
+	start_instruction(tfh);
+}
+
+static inline void tfh_write_restart(struct gru_tlb_fault_handle *tfh,
+				     unsigned long paddr, int gaa,
+				     unsigned long vaddr, int asid, int dirty,
+				     int pagesize)
+{
+	tfh->fillasid = asid;
+	tfh->fillvaddr = vaddr;
+	tfh->pfn = paddr >> GRU_PADDR_SHIFT;
+	tfh->gaa = gaa;
+	tfh->dirty = dirty;
+	tfh->pagesize = pagesize;
+	tfh->opc = TFHOP_WRITE_RESTART;
+	start_instruction(tfh);
+}
+
+static inline void tfh_restart(struct gru_tlb_fault_handle *tfh)
+{
+	tfh->opc = TFHOP_RESTART;
+	start_instruction(tfh);
+}
+
+static inline void tfh_user_polling_mode(struct gru_tlb_fault_handle *tfh)
+{
+	tfh->opc = TFHOP_USER_POLLING_MODE;
+	start_instruction(tfh);
+}
+
+static inline void tfh_exception(struct gru_tlb_fault_handle *tfh)
+{
+	tfh->opc = TFHOP_EXCEPTION;
+	start_instruction(tfh);
+}
+
+#endif /* __GRUHANDLES_H__ */
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
new file mode 100644
index 00000000000..dfd49af0fe1
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -0,0 +1,679 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              KERNEL SERVICES THAT USE THE GRU
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+#include "grukservices.h"
+#include "gru_instructions.h"
+#include <asm/uv/uv_hub.h>
+
+/*
+ * Kernel GRU Usage
+ *
+ * The following is an interim algorithm for management of kernel GRU
+ * resources. This will likely be replaced when we better understand the
+ * kernel/user requirements.
+ *
+ * At boot time, the kernel permanently reserves a fixed number of
+ * CBRs/DSRs for each cpu to use. The resources are all taken from
+ * the GRU chiplet 1 on the blade. This leaves the full set of resources
+ * of chiplet 0 available to be allocated to a single user.
+ */
+
+/* Blade percpu resources PERMANENTLY reserved for kernel use */
+#define GRU_NUM_KERNEL_CBR      1
+#define GRU_NUM_KERNEL_DSR_BYTES 256
+#define KERNEL_CTXNUM           15
+
+/* GRU instruction attributes for all instructions */
+#define IMA			IMA_CB_DELAY
+
+/* GRU cacheline size is always 64 bytes - even on arches with 128 byte lines */
+#define __gru_cacheline_aligned__                               \
+	__attribute__((__aligned__(GRU_CACHE_LINE_BYTES)))
+
+#define MAGIC	0x1234567887654321UL
+
+/* Default retry count for GRU errors on kernel instructions */
+#define EXCEPTION_RETRY_LIMIT	3
+
+/* Status of message queue sections */
+#define MQS_EMPTY		0
+#define MQS_FULL		1
+#define MQS_NOOP		2
+
+/*----------------- RESOURCE MANAGEMENT -------------------------------------*/
+/* optimized for x86_64 */
+struct message_queue {
+	union gru_mesqhead	head __gru_cacheline_aligned__;	/* CL 0 */
+	int			qlines;				/* DW 1 */
+	long 			hstatus[2];
+	void 			*next __gru_cacheline_aligned__;/* CL 1 */
+	void 			*limit;
+	void 			*start;
+	void 			*start2;
+	char			data ____cacheline_aligned;	/* CL 2 */
+};
+
+/* First word in every message - used by mesq interface */
+struct message_header {
+	char	present;
+	char	present2;
+	char 	lines;
+	char	fill;
+};
+
+#define QLINES(mq)	((mq) + offsetof(struct message_queue, qlines))
+#define HSTATUS(mq, h)	((mq) + offsetof(struct message_queue, hstatus[h]))
+
+static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr)
+{
+	struct gru_blade_state *bs;
+	int lcpu;
+
+	BUG_ON(dsr_bytes > GRU_NUM_KERNEL_DSR_BYTES);
+	preempt_disable();
+	bs = gru_base[uv_numa_blade_id()];
+	lcpu = uv_blade_processor_id();
+	*cb = bs->kernel_cb + lcpu * GRU_HANDLE_STRIDE;
+	*dsr = bs->kernel_dsr + lcpu * GRU_NUM_KERNEL_DSR_BYTES;
+	return 0;
+}
+
+static void gru_free_cpu_resources(void *cb, void *dsr)
+{
+	preempt_enable();
+}
+
+int gru_get_cb_exception_detail(void *cb,
+		struct control_block_extended_exc_detail *excdet)
+{
+	struct gru_control_block_extended *cbe;
+
+	cbe = get_cbe(GRUBASE(cb), get_cb_number(cb));
+	excdet->opc = cbe->opccpy;
+	excdet->exopc = cbe->exopccpy;
+	excdet->ecause = cbe->ecause;
+	excdet->exceptdet0 = cbe->idef1upd;
+	excdet->exceptdet1 = cbe->idef3upd;
+	return 0;
+}
+
+char *gru_get_cb_exception_detail_str(int ret, void *cb,
+				      char *buf, int size)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	struct control_block_extended_exc_detail excdet;
+
+	if (ret > 0 && gen->istatus == CBS_EXCEPTION) {
+		gru_get_cb_exception_detail(cb, &excdet);
+		snprintf(buf, size,
+			"GRU exception: cb %p, opc %d, exopc %d, ecause 0x%x,"
+			"excdet0 0x%lx, excdet1 0x%x",
+			gen, excdet.opc, excdet.exopc, excdet.ecause,
+			excdet.exceptdet0, excdet.exceptdet1);
+	} else {
+		snprintf(buf, size, "No exception");
+	}
+	return buf;
+}
+
+static int gru_wait_idle_or_exception(struct gru_control_block_status *gen)
+{
+	while (gen->istatus >= CBS_ACTIVE) {
+		cpu_relax();
+		barrier();
+	}
+	return gen->istatus;
+}
+
+static int gru_retry_exception(void *cb)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	struct control_block_extended_exc_detail excdet;
+	int retry = EXCEPTION_RETRY_LIMIT;
+
+	while (1)  {
+		if (gru_get_cb_message_queue_substatus(cb))
+			break;
+		if (gru_wait_idle_or_exception(gen) == CBS_IDLE)
+			return CBS_IDLE;
+
+		gru_get_cb_exception_detail(cb, &excdet);
+		if (excdet.ecause & ~EXCEPTION_RETRY_BITS)
+			break;
+		if (retry-- == 0)
+			break;
+		gen->icmd = 1;
+		gru_flush_cache(gen);
+	}
+	return CBS_EXCEPTION;
+}
+
+int gru_check_status_proc(void *cb)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	int ret;
+
+	ret = gen->istatus;
+	if (ret != CBS_EXCEPTION)
+		return ret;
+	return gru_retry_exception(cb);
+
+}
+
+int gru_wait_proc(void *cb)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	int ret;
+
+	ret = gru_wait_idle_or_exception(gen);
+	if (ret == CBS_EXCEPTION)
+		ret = gru_retry_exception(cb);
+
+	return ret;
+}
+
+void gru_abort(int ret, void *cb, char *str)
+{
+	char buf[GRU_EXC_STR_SIZE];
+
+	panic("GRU FATAL ERROR: %s - %s\n", str,
+	      gru_get_cb_exception_detail_str(ret, cb, buf, sizeof(buf)));
+}
+
+void gru_wait_abort_proc(void *cb)
+{
+	int ret;
+
+	ret = gru_wait_proc(cb);
+	if (ret)
+		gru_abort(ret, cb, "gru_wait_abort");
+}
+
+
+/*------------------------------ MESSAGE QUEUES -----------------------------*/
+
+/* Internal status . These are NOT returned to the user. */
+#define MQIE_AGAIN		-1	/* try again */
+
+
+/*
+ * Save/restore the "present" flag that is in the second line of 2-line
+ * messages
+ */
+static inline int get_present2(void *p)
+{
+	struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES;
+	return mhdr->present;
+}
+
+static inline void restore_present2(void *p, int val)
+{
+	struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES;
+	mhdr->present = val;
+}
+
+/*
+ * Create a message queue.
+ * 	qlines - message queue size in cache lines. Includes 2-line header.
+ */
+int gru_create_message_queue(void *p, unsigned int bytes)
+{
+	struct message_queue *mq = p;
+	unsigned int qlines;
+
+	qlines = bytes / GRU_CACHE_LINE_BYTES - 2;
+	memset(mq, 0, bytes);
+	mq->start = &mq->data;
+	mq->start2 = &mq->data + (qlines / 2 - 1) * GRU_CACHE_LINE_BYTES;
+	mq->next = &mq->data;
+	mq->limit = &mq->data + (qlines - 2) * GRU_CACHE_LINE_BYTES;
+	mq->qlines = qlines;
+	mq->hstatus[0] = 0;
+	mq->hstatus[1] = 1;
+	mq->head = gru_mesq_head(2, qlines / 2 + 1);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gru_create_message_queue);
+
+/*
+ * Send a NOOP message to a message queue
+ * 	Returns:
+ * 		 0 - if queue is full after the send. This is the normal case
+ * 		     but various races can change this.
+ *		-1 - if mesq sent successfully but queue not full
+ *		>0 - unexpected error. MQE_xxx returned
+ */
+static int send_noop_message(void *cb,
+				unsigned long mq, void *mesg)
+{
+	const struct message_header noop_header = {
+					.present = MQS_NOOP, .lines = 1};
+	unsigned long m;
+	int substatus, ret;
+	struct message_header save_mhdr, *mhdr = mesg;
+
+	STAT(mesq_noop);
+	save_mhdr = *mhdr;
+	*mhdr = noop_header;
+	gru_mesq(cb, mq, gru_get_tri(mhdr), 1, IMA);
+	ret = gru_wait(cb);
+
+	if (ret) {
+		substatus = gru_get_cb_message_queue_substatus(cb);
+		switch (substatus) {
+		case CBSS_NO_ERROR:
+			STAT(mesq_noop_unexpected_error);
+			ret = MQE_UNEXPECTED_CB_ERR;
+			break;
+		case CBSS_LB_OVERFLOWED:
+			STAT(mesq_noop_lb_overflow);
+			ret = MQE_CONGESTION;
+			break;
+		case CBSS_QLIMIT_REACHED:
+			STAT(mesq_noop_qlimit_reached);
+			ret = 0;
+			break;
+		case CBSS_AMO_NACKED:
+			STAT(mesq_noop_amo_nacked);
+			ret = MQE_CONGESTION;
+			break;
+		case CBSS_PUT_NACKED:
+			STAT(mesq_noop_put_nacked);
+			m = mq + (gru_get_amo_value_head(cb) << 6);
+			gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, 1, 1,
+						IMA);
+			if (gru_wait(cb) == CBS_IDLE)
+				ret = MQIE_AGAIN;
+			else
+				ret = MQE_UNEXPECTED_CB_ERR;
+			break;
+		case CBSS_PAGE_OVERFLOW:
+		default:
+			BUG();
+		}
+	}
+	*mhdr = save_mhdr;
+	return ret;
+}
+
+/*
+ * Handle a gru_mesq full.
+ */
+static int send_message_queue_full(void *cb,
+			   unsigned long mq, void *mesg, int lines)
+{
+	union gru_mesqhead mqh;
+	unsigned int limit, head;
+	unsigned long avalue;
+	int half, qlines, save;
+
+	/* Determine if switching to first/second half of q */
+	avalue = gru_get_amo_value(cb);
+	head = gru_get_amo_value_head(cb);
+	limit = gru_get_amo_value_limit(cb);
+
+	/*
+	 * Fetch "qlines" from the queue header. Since the queue may be
+	 * in memory that can't be accessed using socket addresses, use
+	 * the GRU to access the data. Use DSR space from the message.
+	 */
+	save = *(int *)mesg;
+	gru_vload(cb, QLINES(mq), gru_get_tri(mesg), XTYPE_W, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		goto cberr;
+	qlines = *(int *)mesg;
+	*(int *)mesg = save;
+	half = (limit != qlines);
+
+	if (half)
+		mqh = gru_mesq_head(qlines / 2 + 1, qlines);
+	else
+		mqh = gru_mesq_head(2, qlines / 2 + 1);
+
+	/* Try to get lock for switching head pointer */
+	gru_gamir(cb, EOP_IR_CLR, HSTATUS(mq, half), XTYPE_DW, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		goto cberr;
+	if (!gru_get_amo_value(cb)) {
+		STAT(mesq_qf_locked);
+		return MQE_QUEUE_FULL;
+	}
+
+	/* Got the lock. Send optional NOP if queue not full, */
+	if (head != limit) {
+		if (send_noop_message(cb, mq, mesg)) {
+			gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half),
+					XTYPE_DW, IMA);
+			if (gru_wait(cb) != CBS_IDLE)
+				goto cberr;
+			STAT(mesq_qf_noop_not_full);
+			return MQIE_AGAIN;
+		}
+		avalue++;
+	}
+
+	/* Then flip queuehead to other half of queue. */
+	gru_gamer(cb, EOP_ERR_CSWAP, mq, XTYPE_DW, mqh.val, avalue, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		goto cberr;
+
+	/* If not successfully in swapping queue head, clear the hstatus lock */
+	if (gru_get_amo_value(cb) != avalue) {
+		STAT(mesq_qf_switch_head_failed);
+		gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half), XTYPE_DW, IMA);
+		if (gru_wait(cb) != CBS_IDLE)
+			goto cberr;
+	}
+	return MQIE_AGAIN;
+cberr:
+	STAT(mesq_qf_unexpected_error);
+	return MQE_UNEXPECTED_CB_ERR;
+}
+
+
+/*
+ * Handle a gru_mesq failure. Some of these failures are software recoverable
+ * or retryable.
+ */
+static int send_message_failure(void *cb,
+				unsigned long mq,
+				void *mesg,
+				int lines)
+{
+	int substatus, ret = 0;
+	unsigned long m;
+
+	substatus = gru_get_cb_message_queue_substatus(cb);
+	switch (substatus) {
+	case CBSS_NO_ERROR:
+		STAT(mesq_send_unexpected_error);
+		ret = MQE_UNEXPECTED_CB_ERR;
+		break;
+	case CBSS_LB_OVERFLOWED:
+		STAT(mesq_send_lb_overflow);
+		ret = MQE_CONGESTION;
+		break;
+	case CBSS_QLIMIT_REACHED:
+		STAT(mesq_send_qlimit_reached);
+		ret = send_message_queue_full(cb, mq, mesg, lines);
+		break;
+	case CBSS_AMO_NACKED:
+		STAT(mesq_send_amo_nacked);
+		ret = MQE_CONGESTION;
+		break;
+	case CBSS_PUT_NACKED:
+		STAT(mesq_send_put_nacked);
+		m =mq + (gru_get_amo_value_head(cb) << 6);
+		gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, lines, 1, IMA);
+		if (gru_wait(cb) == CBS_IDLE)
+			ret = MQE_OK;
+		else
+			ret = MQE_UNEXPECTED_CB_ERR;
+		break;
+	default:
+		BUG();
+	}
+	return ret;
+}
+
+/*
+ * Send a message to a message queue
+ * 	cb	GRU control block to use to send message
+ * 	mq	message queue
+ * 	mesg	message. ust be vaddr within a GSEG
+ * 	bytes	message size (<= 2 CL)
+ */
+int gru_send_message_gpa(unsigned long mq, void *mesg, unsigned int bytes)
+{
+	struct message_header *mhdr;
+	void *cb;
+	void *dsr;
+	int istatus, clines, ret;
+
+	STAT(mesq_send);
+	BUG_ON(bytes < sizeof(int) || bytes > 2 * GRU_CACHE_LINE_BYTES);
+
+	clines = (bytes + GRU_CACHE_LINE_BYTES - 1) / GRU_CACHE_LINE_BYTES;
+	if (gru_get_cpu_resources(bytes, &cb, &dsr))
+		return MQE_BUG_NO_RESOURCES;
+	memcpy(dsr, mesg, bytes);
+	mhdr = dsr;
+	mhdr->present = MQS_FULL;
+	mhdr->lines = clines;
+	if (clines == 2) {
+		mhdr->present2 = get_present2(mhdr);
+		restore_present2(mhdr, MQS_FULL);
+	}
+
+	do {
+		ret = MQE_OK;
+		gru_mesq(cb, mq, gru_get_tri(mhdr), clines, IMA);
+		istatus = gru_wait(cb);
+		if (istatus != CBS_IDLE)
+			ret = send_message_failure(cb, mq, dsr, clines);
+	} while (ret == MQIE_AGAIN);
+	gru_free_cpu_resources(cb, dsr);
+
+	if (ret)
+		STAT(mesq_send_failed);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gru_send_message_gpa);
+
+/*
+ * Advance the receive pointer for the queue to the next message.
+ */
+void gru_free_message(void *rmq, void *mesg)
+{
+	struct message_queue *mq = rmq;
+	struct message_header *mhdr = mq->next;
+	void *next, *pnext;
+	int half = -1;
+	int lines = mhdr->lines;
+
+	if (lines == 2)
+		restore_present2(mhdr, MQS_EMPTY);
+	mhdr->present = MQS_EMPTY;
+
+	pnext = mq->next;
+	next = pnext + GRU_CACHE_LINE_BYTES * lines;
+	if (next == mq->limit) {
+		next = mq->start;
+		half = 1;
+	} else if (pnext < mq->start2 && next >= mq->start2) {
+		half = 0;
+	}
+
+	if (half >= 0)
+		mq->hstatus[half] = 1;
+	mq->next = next;
+}
+EXPORT_SYMBOL_GPL(gru_free_message);
+
+/*
+ * Get next message from message queue. Return NULL if no message
+ * present. User must call next_message() to move to next message.
+ * 	rmq	message queue
+ */
+void *gru_get_next_message(void *rmq)
+{
+	struct message_queue *mq = rmq;
+	struct message_header *mhdr = mq->next;
+	int present = mhdr->present;
+
+	/* skip NOOP messages */
+	STAT(mesq_receive);
+	while (present == MQS_NOOP) {
+		gru_free_message(rmq, mhdr);
+		mhdr = mq->next;
+		present = mhdr->present;
+	}
+
+	/* Wait for both halves of 2 line messages */
+	if (present == MQS_FULL && mhdr->lines == 2 &&
+				get_present2(mhdr) == MQS_EMPTY)
+		present = MQS_EMPTY;
+
+	if (!present) {
+		STAT(mesq_receive_none);
+		return NULL;
+	}
+
+	if (mhdr->lines == 2)
+		restore_present2(mhdr, mhdr->present2);
+
+	return mhdr;
+}
+EXPORT_SYMBOL_GPL(gru_get_next_message);
+
+/* ---------------------- GRU DATA COPY FUNCTIONS ---------------------------*/
+
+/*
+ * Copy a block of data using the GRU resources
+ */
+int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
+				unsigned int bytes)
+{
+	void *cb;
+	void *dsr;
+	int ret;
+
+	STAT(copy_gpa);
+	if (gru_get_cpu_resources(GRU_NUM_KERNEL_DSR_BYTES, &cb, &dsr))
+		return MQE_BUG_NO_RESOURCES;
+	gru_bcopy(cb, src_gpa, dest_gpa, gru_get_tri(dsr),
+		  XTYPE_B, bytes, GRU_NUM_KERNEL_DSR_BYTES, IMA);
+	ret = gru_wait(cb);
+	gru_free_cpu_resources(cb, dsr);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gru_copy_gpa);
+
+/* ------------------- KERNEL QUICKTESTS RUN AT STARTUP ----------------*/
+/* 	Temp - will delete after we gain confidence in the GRU		*/
+static __cacheline_aligned unsigned long word0;
+static __cacheline_aligned unsigned long word1;
+
+static int quicktest(struct gru_state *gru)
+{
+	void *cb;
+	void *ds;
+	unsigned long *p;
+
+	cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
+	ds = get_gseg_base_address_ds(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
+	p = ds;
+	word0 = MAGIC;
+
+	gru_vload(cb, uv_gpa(&word0), 0, XTYPE_DW, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		BUG();
+
+	if (*(unsigned long *)ds != MAGIC)
+		BUG();
+	gru_vstore(cb, uv_gpa(&word1), 0, XTYPE_DW, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		BUG();
+
+	if (word0 != word1 || word0 != MAGIC) {
+		printk
+		    ("GRU quicktest err: gru %d, found 0x%lx, expected 0x%lx\n",
+		     gru->gs_gid, word1, MAGIC);
+		BUG();		/* ZZZ should not be fatal */
+	}
+
+	return 0;
+}
+
+
+int gru_kservices_init(struct gru_state *gru)
+{
+	struct gru_blade_state *bs;
+	struct gru_context_configuration_handle *cch;
+	unsigned long cbr_map, dsr_map;
+	int err, num, cpus_possible;
+
+	/*
+	 * Currently, resources are reserved ONLY on the second chiplet
+	 * on each blade. This leaves ALL resources on chiplet 0 available
+	 * for user code.
+	 */
+	bs = gru->gs_blade;
+	if (gru != &bs->bs_grus[1])
+		return 0;
+
+	cpus_possible = uv_blade_nr_possible_cpus(gru->gs_blade_id);
+
+	num = GRU_NUM_KERNEL_CBR * cpus_possible;
+	cbr_map = gru_reserve_cb_resources(gru, GRU_CB_COUNT_TO_AU(num), NULL);
+	gru->gs_reserved_cbrs += num;
+
+	num = GRU_NUM_KERNEL_DSR_BYTES * cpus_possible;
+	dsr_map = gru_reserve_ds_resources(gru, GRU_DS_BYTES_TO_AU(num), NULL);
+	gru->gs_reserved_dsr_bytes += num;
+
+	gru->gs_active_contexts++;
+	__set_bit(KERNEL_CTXNUM, &gru->gs_context_map);
+	cch = get_cch(gru->gs_gru_base_vaddr, KERNEL_CTXNUM);
+
+	bs->kernel_cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr,
+					KERNEL_CTXNUM, 0);
+	bs->kernel_dsr = get_gseg_base_address_ds(gru->gs_gru_base_vaddr,
+					KERNEL_CTXNUM, 0);
+
+	lock_cch_handle(cch);
+	cch->tfm_fault_bit_enable = 0;
+	cch->tlb_int_enable = 0;
+	cch->tfm_done_bit_enable = 0;
+	cch->unmap_enable = 1;
+	err = cch_allocate(cch, 0, cbr_map, dsr_map);
+	if (err) {
+		gru_dbg(grudev,
+			"Unable to allocate kernel CCH: gru %d, err %d\n",
+			gru->gs_gid, err);
+		BUG();
+	}
+	if (cch_start(cch)) {
+		gru_dbg(grudev, "Unable to start kernel CCH: gru %d, err %d\n",
+			gru->gs_gid, err);
+		BUG();
+	}
+	unlock_cch_handle(cch);
+
+	if (gru_options & GRU_QUICKLOOK)
+		quicktest(gru);
+	return 0;
+}
diff --git a/drivers/misc/sgi-gru/grukservices.h b/drivers/misc/sgi-gru/grukservices.h
new file mode 100644
index 00000000000..eb17e0a3ac6
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukservices.h
@@ -0,0 +1,134 @@
+
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef __GRU_KSERVICES_H_
+#define __GRU_KSERVICES_H_
+
+
+/*
+ * Message queues using the GRU to send/receive messages.
+ *
+ * These function allow the user to create a message queue for
+ * sending/receiving 1 or 2 cacheline messages using the GRU.
+ *
+ * Processes SENDING messages will use a kernel CBR/DSR to send
+ * the message. This is transparent to the caller.
+ *
+ * The receiver does not use any GRU resources.
+ *
+ * The functions support:
+ * 	- single receiver
+ * 	- multiple senders
+ *	- cross partition message
+ *
+ * Missing features ZZZ:
+ * 	- user options for dealing with timeouts, queue full, etc.
+ * 	- gru_create_message_queue() needs interrupt vector info
+ */
+
+/*
+ * Initialize a user allocated chunk of memory to be used as
+ * a message queue. The caller must ensure that the queue is
+ * in contiguous physical memory and is cacheline aligned.
+ *
+ * Message queue size is the total number of bytes allocated
+ * to the queue including a 2 cacheline header that is used
+ * to manage the queue.
+ *
+ *  Input:
+ * 	p	pointer to user allocated memory.
+ * 	bytes	size of message queue in bytes
+ *
+ *  Errors:
+ *  	0	OK
+ *  	>0	error
+ */
+extern int gru_create_message_queue(void *p, unsigned int bytes);
+
+/*
+ * Send a message to a message queue.
+ *
+ * Note: The message queue transport mechanism uses the first 32
+ * bits of the message. Users should avoid using these bits.
+ *
+ *
+ *   Input:
+ * 	xmq	message queue - must be a UV global physical address
+ * 	mesg	pointer to message. Must be 64-bit aligned
+ * 	bytes	size of message in bytes
+ *
+ *   Output:
+ *      0	message sent
+ *     >0	Send failure - see error codes below
+ *
+ */
+extern int gru_send_message_gpa(unsigned long mq_gpa, void *mesg,
+						unsigned int bytes);
+
+/* Status values for gru_send_message() */
+#define MQE_OK			0	/* message sent successfully */
+#define MQE_CONGESTION		1	/* temporary congestion, try again */
+#define MQE_QUEUE_FULL		2	/* queue is full */
+#define MQE_UNEXPECTED_CB_ERR	3	/* unexpected CB error */
+#define MQE_PAGE_OVERFLOW	10	/* BUG - queue overflowed a page */
+#define MQE_BUG_NO_RESOURCES	11	/* BUG - could not alloc GRU cb/dsr */
+
+/*
+ * Advance the receive pointer for the message queue to the next message.
+ * Note: current API requires messages to be gotten & freed in order. Future
+ * API extensions may allow for out-of-order freeing.
+ *
+ *   Input
+ * 	mq	message queue
+ * 	mesq	message being freed
+ */
+extern void gru_free_message(void *mq, void *mesq);
+
+/*
+ * Get next message from message queue. Returns pointer to
+ * message OR NULL if no message present.
+ * User must call gru_free_message() after message is processed
+ * in order to move the queue pointers to next message.
+ *
+ *   Input
+ * 	mq	message queue
+ *
+ *   Output:
+ *	p	pointer to message
+ *	NULL	no message available
+ */
+extern void *gru_get_next_message(void *mq);
+
+
+/*
+ * Copy data using the GRU. Source or destination can be located in a remote
+ * partition.
+ *
+ *    Input:
+ *    	dest_gpa	destination global physical address
+ *    	src_gpa		source global physical address
+ *    	bytes		number of bytes to copy
+ *
+ *    Output:
+ *	0		OK
+ *	>0		error
+ */
+extern int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
+							unsigned int bytes);
+
+#endif 		/* __GRU_KSERVICES_H_ */
diff --git a/drivers/misc/sgi-gru/grulib.h b/drivers/misc/sgi-gru/grulib.h
new file mode 100644
index 00000000000..e56e196a699
--- /dev/null
+++ b/drivers/misc/sgi-gru/grulib.h
@@ -0,0 +1,97 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRULIB_H__
+#define __GRULIB_H__
+
+#define GRU_BASENAME		"gru"
+#define GRU_FULLNAME		"/dev/gru"
+#define GRU_IOCTL_NUM 		 'G'
+
+/*
+ * Maximum number of GRU segments that a user can have open
+ * ZZZ temp - set high for testing. Revisit.
+ */
+#define GRU_MAX_OPEN_CONTEXTS		32
+
+/* Set Number of Request Blocks */
+#define GRU_CREATE_CONTEXT		_IOWR(GRU_IOCTL_NUM, 1, void *)
+
+/* Register task as using the slice */
+#define GRU_SET_TASK_SLICE		_IOWR(GRU_IOCTL_NUM, 5, void *)
+
+/* Fetch exception detail */
+#define GRU_USER_GET_EXCEPTION_DETAIL	_IOWR(GRU_IOCTL_NUM, 6, void *)
+
+/* For user call_os handling - normally a TLB fault */
+#define GRU_USER_CALL_OS		_IOWR(GRU_IOCTL_NUM, 8, void *)
+
+/* For user unload context */
+#define GRU_USER_UNLOAD_CONTEXT		_IOWR(GRU_IOCTL_NUM, 9, void *)
+
+/* For fetching GRU chiplet status */
+#define GRU_GET_CHIPLET_STATUS		_IOWR(GRU_IOCTL_NUM, 10, void *)
+
+/* For user TLB flushing (primarily for tests) */
+#define GRU_USER_FLUSH_TLB		_IOWR(GRU_IOCTL_NUM, 50, void *)
+
+/* Get some config options (primarily for tests & emulator) */
+#define GRU_GET_CONFIG_INFO		_IOWR(GRU_IOCTL_NUM, 51, void *)
+
+#define CONTEXT_WINDOW_BYTES(th)        (GRU_GSEG_PAGESIZE * (th))
+#define THREAD_POINTER(p, th)		(p + GRU_GSEG_PAGESIZE * (th))
+
+/*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+struct gru_create_context_req {
+	unsigned long		gseg;
+	unsigned int		data_segment_bytes;
+	unsigned int		control_blocks;
+	unsigned int		maximum_thread_count;
+	unsigned int		options;
+};
+
+/*
+ * Structure used to pass unload context parameters to the driver
+ */
+struct gru_unload_context_req {
+	unsigned long	gseg;
+};
+
+/*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+struct gru_flush_tlb_req {
+	unsigned long	gseg;
+	unsigned long	vaddr;
+	size_t		len;
+};
+
+/*
+ * GRU configuration info (temp - for testing)
+ */
+struct gru_config_info {
+	int		cpus;
+	int		blades;
+	int		nodes;
+	int		chiplets;
+	int		fill[16];
+};
+
+#endif /* __GRULIB_H__ */
diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c
new file mode 100644
index 00000000000..0eeb8dddd2f
--- /dev/null
+++ b/drivers/misc/sgi-gru/grumain.c
@@ -0,0 +1,802 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *            DRIVER TABLE MANAGER + GRU CONTEXT LOAD/UNLOAD
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <asm/uv/uv_hub.h>
+#include "gru.h"
+#include "grutables.h"
+#include "gruhandles.h"
+
+unsigned long gru_options __read_mostly;
+
+static struct device_driver gru_driver = {
+	.name = "gru"
+};
+
+static struct device gru_device = {
+	.bus_id = {0},
+	.driver = &gru_driver,
+};
+
+struct device *grudev = &gru_device;
+
+/*
+ * Select a gru fault map to be used by the current cpu. Note that
+ * multiple cpus may be using the same map.
+ *	ZZZ should "shift" be used?? Depends on HT cpu numbering
+ *	ZZZ should be inline but did not work on emulator
+ */
+int gru_cpu_fault_map_id(void)
+{
+	return uv_blade_processor_id() % GRU_NUM_TFM;
+}
+
+/*--------- ASID Management -------------------------------------------
+ *
+ *  Initially, assign asids sequentially from MIN_ASID .. MAX_ASID.
+ *  Once MAX is reached, flush the TLB & start over. However,
+ *  some asids may still be in use. There won't be many (percentage wise) still
+ *  in use. Search active contexts & determine the value of the first
+ *  asid in use ("x"s below). Set "limit" to this value.
+ *  This defines a block of assignable asids.
+ *
+ *  When "limit" is reached, search forward from limit+1 and determine the
+ *  next block of assignable asids.
+ *
+ *  Repeat until MAX_ASID is reached, then start over again.
+ *
+ *  Each time MAX_ASID is reached, increment the asid generation. Since
+ *  the search for in-use asids only checks contexts with GRUs currently
+ *  assigned, asids in some contexts will be missed. Prior to loading
+ *  a context, the asid generation of the GTS asid is rechecked. If it
+ *  doesn't match the current generation, a new asid will be assigned.
+ *
+ *   	0---------------x------------x---------------------x----|
+ *	  ^-next	^-limit	   				^-MAX_ASID
+ *
+ * All asid manipulation & context loading/unloading is protected by the
+ * gs_lock.
+ */
+
+/* Hit the asid limit. Start over */
+static int gru_wrap_asid(struct gru_state *gru)
+{
+	gru_dbg(grudev, "gru %p\n", gru);
+	STAT(asid_wrap);
+	gru->gs_asid_gen++;
+	gru_flush_all_tlb(gru);
+	return MIN_ASID;
+}
+
+/* Find the next chunk of unused asids */
+static int gru_reset_asid_limit(struct gru_state *gru, int asid)
+{
+	int i, gid, inuse_asid, limit;
+
+	gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid);
+	STAT(asid_next);
+	limit = MAX_ASID;
+	if (asid >= limit)
+		asid = gru_wrap_asid(gru);
+	gid = gru->gs_gid;
+again:
+	for (i = 0; i < GRU_NUM_CCH; i++) {
+		if (!gru->gs_gts[i])
+			continue;
+		inuse_asid = gru->gs_gts[i]->ts_gms->ms_asids[gid].mt_asid;
+		gru_dbg(grudev, "gru %p, inuse_asid 0x%x, cxtnum %d, gts %p\n",
+			gru, inuse_asid, i, gru->gs_gts[i]);
+		if (inuse_asid == asid) {
+			asid += ASID_INC;
+			if (asid >= limit) {
+				/*
+				 * empty range: reset the range limit and
+				 * start over
+				 */
+				limit = MAX_ASID;
+				if (asid >= MAX_ASID)
+					asid = gru_wrap_asid(gru);
+				goto again;
+			}
+		}
+
+		if ((inuse_asid > asid) && (inuse_asid < limit))
+			limit = inuse_asid;
+	}
+	gru->gs_asid_limit = limit;
+	gru->gs_asid = asid;
+	gru_dbg(grudev, "gru %p, new asid 0x%x, new_limit 0x%x\n", gru, asid,
+		limit);
+	return asid;
+}
+
+/* Assign a new ASID to a thread context.  */
+static int gru_assign_asid(struct gru_state *gru)
+{
+	int asid;
+
+	spin_lock(&gru->gs_asid_lock);
+	gru->gs_asid += ASID_INC;
+	asid = gru->gs_asid;
+	if (asid >= gru->gs_asid_limit)
+		asid = gru_reset_asid_limit(gru, asid);
+	spin_unlock(&gru->gs_asid_lock);
+
+	gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid);
+	return asid;
+}
+
+/*
+ * Clear n bits in a word. Return a word indicating the bits that were cleared.
+ * Optionally, build an array of chars that contain the bit numbers allocated.
+ */
+static unsigned long reserve_resources(unsigned long *p, int n, int mmax,
+				       char *idx)
+{
+	unsigned long bits = 0;
+	int i;
+
+	do {
+		i = find_first_bit(p, mmax);
+		if (i == mmax)
+			BUG();
+		__clear_bit(i, p);
+		__set_bit(i, &bits);
+		if (idx)
+			*idx++ = i;
+	} while (--n);
+	return bits;
+}
+
+unsigned long gru_reserve_cb_resources(struct gru_state *gru, int cbr_au_count,
+				       char *cbmap)
+{
+	return reserve_resources(&gru->gs_cbr_map, cbr_au_count, GRU_CBR_AU,
+				 cbmap);
+}
+
+unsigned long gru_reserve_ds_resources(struct gru_state *gru, int dsr_au_count,
+				       char *dsmap)
+{
+	return reserve_resources(&gru->gs_dsr_map, dsr_au_count, GRU_DSR_AU,
+				 dsmap);
+}
+
+static void reserve_gru_resources(struct gru_state *gru,
+				  struct gru_thread_state *gts)
+{
+	gru->gs_active_contexts++;
+	gts->ts_cbr_map =
+	    gru_reserve_cb_resources(gru, gts->ts_cbr_au_count,
+				     gts->ts_cbr_idx);
+	gts->ts_dsr_map =
+	    gru_reserve_ds_resources(gru, gts->ts_dsr_au_count, NULL);
+}
+
+static void free_gru_resources(struct gru_state *gru,
+			       struct gru_thread_state *gts)
+{
+	gru->gs_active_contexts--;
+	gru->gs_cbr_map |= gts->ts_cbr_map;
+	gru->gs_dsr_map |= gts->ts_dsr_map;
+}
+
+/*
+ * Check if a GRU has sufficient free resources to satisfy an allocation
+ * request. Note: GRU locks may or may not be held when this is called. If
+ * not held, recheck after acquiring the appropriate locks.
+ *
+ * Returns 1 if sufficient resources, 0 if not
+ */
+static int check_gru_resources(struct gru_state *gru, int cbr_au_count,
+			       int dsr_au_count, int max_active_contexts)
+{
+	return hweight64(gru->gs_cbr_map) >= cbr_au_count
+		&& hweight64(gru->gs_dsr_map) >= dsr_au_count
+		&& gru->gs_active_contexts < max_active_contexts;
+}
+
+/*
+ * TLB manangment requires tracking all GRU chiplets that have loaded a GSEG
+ * context.
+ */
+static int gru_load_mm_tracker(struct gru_state *gru, struct gru_mm_struct *gms,
+			       int ctxnum)
+{
+	struct gru_mm_tracker *asids = &gms->ms_asids[gru->gs_gid];
+	unsigned short ctxbitmap = (1 << ctxnum);
+	int asid;
+
+	spin_lock(&gms->ms_asid_lock);
+	asid = asids->mt_asid;
+
+	if (asid == 0 || asids->mt_asid_gen != gru->gs_asid_gen) {
+		asid = gru_assign_asid(gru);
+		asids->mt_asid = asid;
+		asids->mt_asid_gen = gru->gs_asid_gen;
+		STAT(asid_new);
+	} else {
+		STAT(asid_reuse);
+	}
+
+	BUG_ON(asids->mt_ctxbitmap & ctxbitmap);
+	asids->mt_ctxbitmap |= ctxbitmap;
+	if (!test_bit(gru->gs_gid, gms->ms_asidmap))
+		__set_bit(gru->gs_gid, gms->ms_asidmap);
+	spin_unlock(&gms->ms_asid_lock);
+
+	gru_dbg(grudev,
+		"gru %x, gms %p, ctxnum 0x%d, asid 0x%x, asidmap 0x%lx\n",
+		gru->gs_gid, gms, ctxnum, asid, gms->ms_asidmap[0]);
+	return asid;
+}
+
+static void gru_unload_mm_tracker(struct gru_state *gru,
+				  struct gru_mm_struct *gms, int ctxnum)
+{
+	struct gru_mm_tracker *asids;
+	unsigned short ctxbitmap;
+
+	asids = &gms->ms_asids[gru->gs_gid];
+	ctxbitmap = (1 << ctxnum);
+	spin_lock(&gms->ms_asid_lock);
+	BUG_ON((asids->mt_ctxbitmap & ctxbitmap) != ctxbitmap);
+	asids->mt_ctxbitmap ^= ctxbitmap;
+	gru_dbg(grudev, "gru %x, gms %p, ctxnum 0x%d, asidmap 0x%lx\n",
+		gru->gs_gid, gms, ctxnum, gms->ms_asidmap[0]);
+	spin_unlock(&gms->ms_asid_lock);
+}
+
+/*
+ * Decrement the reference count on a GTS structure. Free the structure
+ * if the reference count goes to zero.
+ */
+void gts_drop(struct gru_thread_state *gts)
+{
+	if (gts && atomic_dec_return(&gts->ts_refcnt) == 0) {
+		gru_drop_mmu_notifier(gts->ts_gms);
+		kfree(gts);
+		STAT(gts_free);
+	}
+}
+
+/*
+ * Locate the GTS structure for the current thread.
+ */
+static struct gru_thread_state *gru_find_current_gts_nolock(struct gru_vma_data
+			    *vdata, int tsid)
+{
+	struct gru_thread_state *gts;
+
+	list_for_each_entry(gts, &vdata->vd_head, ts_next)
+	    if (gts->ts_tsid == tsid)
+		return gts;
+	return NULL;
+}
+
+/*
+ * Allocate a thread state structure.
+ */
+static struct gru_thread_state *gru_alloc_gts(struct vm_area_struct *vma,
+					      struct gru_vma_data *vdata,
+					      int tsid)
+{
+	struct gru_thread_state *gts;
+	int bytes;
+
+	bytes = DSR_BYTES(vdata->vd_dsr_au_count) +
+				CBR_BYTES(vdata->vd_cbr_au_count);
+	bytes += sizeof(struct gru_thread_state);
+	gts = kzalloc(bytes, GFP_KERNEL);
+	if (!gts)
+		return NULL;
+
+	STAT(gts_alloc);
+	atomic_set(&gts->ts_refcnt, 1);
+	mutex_init(&gts->ts_ctxlock);
+	gts->ts_cbr_au_count = vdata->vd_cbr_au_count;
+	gts->ts_dsr_au_count = vdata->vd_dsr_au_count;
+	gts->ts_user_options = vdata->vd_user_options;
+	gts->ts_tsid = tsid;
+	gts->ts_user_options = vdata->vd_user_options;
+	gts->ts_ctxnum = NULLCTX;
+	gts->ts_mm = current->mm;
+	gts->ts_vma = vma;
+	gts->ts_tlb_int_select = -1;
+	gts->ts_gms = gru_register_mmu_notifier();
+	if (!gts->ts_gms)
+		goto err;
+
+	gru_dbg(grudev, "alloc vdata %p, new gts %p\n", vdata, gts);
+	return gts;
+
+err:
+	gts_drop(gts);
+	return NULL;
+}
+
+/*
+ * Allocate a vma private data structure.
+ */
+struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma, int tsid)
+{
+	struct gru_vma_data *vdata = NULL;
+
+	vdata = kmalloc(sizeof(*vdata), GFP_KERNEL);
+	if (!vdata)
+		return NULL;
+
+	INIT_LIST_HEAD(&vdata->vd_head);
+	spin_lock_init(&vdata->vd_lock);
+	gru_dbg(grudev, "alloc vdata %p\n", vdata);
+	return vdata;
+}
+
+/*
+ * Find the thread state structure for the current thread.
+ */
+struct gru_thread_state *gru_find_thread_state(struct vm_area_struct *vma,
+					int tsid)
+{
+	struct gru_vma_data *vdata = vma->vm_private_data;
+	struct gru_thread_state *gts;
+
+	spin_lock(&vdata->vd_lock);
+	gts = gru_find_current_gts_nolock(vdata, tsid);
+	spin_unlock(&vdata->vd_lock);
+	gru_dbg(grudev, "vma %p, gts %p\n", vma, gts);
+	return gts;
+}
+
+/*
+ * Allocate a new thread state for a GSEG. Note that races may allow
+ * another thread to race to create a gts.
+ */
+struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct *vma,
+					int tsid)
+{
+	struct gru_vma_data *vdata = vma->vm_private_data;
+	struct gru_thread_state *gts, *ngts;
+
+	gts = gru_alloc_gts(vma, vdata, tsid);
+	if (!gts)
+		return NULL;
+
+	spin_lock(&vdata->vd_lock);
+	ngts = gru_find_current_gts_nolock(vdata, tsid);
+	if (ngts) {
+		gts_drop(gts);
+		gts = ngts;
+		STAT(gts_double_allocate);
+	} else {
+		list_add(&gts->ts_next, &vdata->vd_head);
+	}
+	spin_unlock(&vdata->vd_lock);
+	gru_dbg(grudev, "vma %p, gts %p\n", vma, gts);
+	return gts;
+}
+
+/*
+ * Free the GRU context assigned to the thread state.
+ */
+static void gru_free_gru_context(struct gru_thread_state *gts)
+{
+	struct gru_state *gru;
+
+	gru = gts->ts_gru;
+	gru_dbg(grudev, "gts %p, gru %p\n", gts, gru);
+
+	spin_lock(&gru->gs_lock);
+	gru->gs_gts[gts->ts_ctxnum] = NULL;
+	free_gru_resources(gru, gts);
+	BUG_ON(test_bit(gts->ts_ctxnum, &gru->gs_context_map) == 0);
+	__clear_bit(gts->ts_ctxnum, &gru->gs_context_map);
+	gts->ts_ctxnum = NULLCTX;
+	gts->ts_gru = NULL;
+	spin_unlock(&gru->gs_lock);
+
+	gts_drop(gts);
+	STAT(free_context);
+}
+
+/*
+ * Prefetching cachelines help hardware performance.
+ * (Strictly a performance enhancement. Not functionally required).
+ */
+static void prefetch_data(void *p, int num, int stride)
+{
+	while (num-- > 0) {
+		prefetchw(p);
+		p += stride;
+	}
+}
+
+static inline long gru_copy_handle(void *d, void *s)
+{
+	memcpy(d, s, GRU_HANDLE_BYTES);
+	return GRU_HANDLE_BYTES;
+}
+
+/* rewrite in assembly & use lots of prefetch */
+static void gru_load_context_data(void *save, void *grubase, int ctxnum,
+				  unsigned long cbrmap, unsigned long dsrmap)
+{
+	void *gseg, *cb, *cbe;
+	unsigned long length;
+	int i, scr;
+
+	gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+	length = hweight64(dsrmap) * GRU_DSR_AU_BYTES;
+	prefetch_data(gseg + GRU_DS_BASE, length / GRU_CACHE_LINE_BYTES,
+		      GRU_CACHE_LINE_BYTES);
+
+	cb = gseg + GRU_CB_BASE;
+	cbe = grubase + GRU_CBE_BASE;
+	for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+		prefetch_data(cb, 1, GRU_CACHE_LINE_BYTES);
+		prefetch_data(cbe + i * GRU_HANDLE_STRIDE, 1,
+			      GRU_CACHE_LINE_BYTES);
+		cb += GRU_HANDLE_STRIDE;
+	}
+
+	cb = gseg + GRU_CB_BASE;
+	for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+		save += gru_copy_handle(cb, save);
+		save += gru_copy_handle(cbe + i * GRU_HANDLE_STRIDE, save);
+		cb += GRU_HANDLE_STRIDE;
+	}
+
+	memcpy(gseg + GRU_DS_BASE, save, length);
+}
+
+static void gru_unload_context_data(void *save, void *grubase, int ctxnum,
+				    unsigned long cbrmap, unsigned long dsrmap)
+{
+	void *gseg, *cb, *cbe;
+	unsigned long length;
+	int i, scr;
+
+	gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+
+	cb = gseg + GRU_CB_BASE;
+	cbe = grubase + GRU_CBE_BASE;
+	for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+		save += gru_copy_handle(save, cb);
+		save += gru_copy_handle(save, cbe + i * GRU_HANDLE_STRIDE);
+		cb += GRU_HANDLE_STRIDE;
+	}
+	length = hweight64(dsrmap) * GRU_DSR_AU_BYTES;
+	memcpy(save, gseg + GRU_DS_BASE, length);
+}
+
+void gru_unload_context(struct gru_thread_state *gts, int savestate)
+{
+	struct gru_state *gru = gts->ts_gru;
+	struct gru_context_configuration_handle *cch;
+	int ctxnum = gts->ts_ctxnum;
+
+	zap_vma_ptes(gts->ts_vma, UGRUADDR(gts), GRU_GSEG_PAGESIZE);
+	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+	lock_cch_handle(cch);
+	if (cch_interrupt_sync(cch))
+		BUG();
+	gru_dbg(grudev, "gts %p\n", gts);
+
+	gru_unload_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum);
+	if (savestate)
+		gru_unload_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr,
+					ctxnum, gts->ts_cbr_map,
+					gts->ts_dsr_map);
+
+	if (cch_deallocate(cch))
+		BUG();
+	gts->ts_force_unload = 0;	/* ts_force_unload locked by CCH lock */
+	unlock_cch_handle(cch);
+
+	gru_free_gru_context(gts);
+	STAT(unload_context);
+}
+
+/*
+ * Load a GRU context by copying it from the thread data structure in memory
+ * to the GRU.
+ */
+static void gru_load_context(struct gru_thread_state *gts)
+{
+	struct gru_state *gru = gts->ts_gru;
+	struct gru_context_configuration_handle *cch;
+	int err, asid, ctxnum = gts->ts_ctxnum;
+
+	gru_dbg(grudev, "gts %p\n", gts);
+	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+	lock_cch_handle(cch);
+	asid = gru_load_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum);
+	cch->tfm_fault_bit_enable =
+	    (gts->ts_user_options == GRU_OPT_MISS_FMM_POLL
+	     || gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
+	cch->tlb_int_enable = (gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
+	if (cch->tlb_int_enable) {
+		gts->ts_tlb_int_select = gru_cpu_fault_map_id();
+		cch->tlb_int_select = gts->ts_tlb_int_select;
+	}
+	cch->tfm_done_bit_enable = 0;
+	err = cch_allocate(cch, asid, gts->ts_cbr_map, gts->ts_dsr_map);
+	if (err) {
+		gru_dbg(grudev,
+			"err %d: cch %p, gts %p, cbr 0x%lx, dsr 0x%lx\n",
+			err, cch, gts, gts->ts_cbr_map, gts->ts_dsr_map);
+		BUG();
+	}
+
+	gru_load_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr, ctxnum,
+			      gts->ts_cbr_map, gts->ts_dsr_map);
+
+	if (cch_start(cch))
+		BUG();
+	unlock_cch_handle(cch);
+
+	STAT(load_context);
+}
+
+/*
+ * Update fields in an active CCH:
+ * 	- retarget interrupts on local blade
+ * 	- force a delayed context unload by clearing the CCH asids. This
+ * 	  forces TLB misses for new GRU instructions. The context is unloaded
+ * 	  when the next TLB miss occurs.
+ */
+static int gru_update_cch(struct gru_thread_state *gts, int int_select)
+{
+	struct gru_context_configuration_handle *cch;
+	struct gru_state *gru = gts->ts_gru;
+	int i, ctxnum = gts->ts_ctxnum, ret = 0;
+
+	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+	lock_cch_handle(cch);
+	if (cch->state == CCHSTATE_ACTIVE) {
+		if (gru->gs_gts[gts->ts_ctxnum] != gts)
+			goto exit;
+		if (cch_interrupt(cch))
+			BUG();
+		if (int_select >= 0) {
+			gts->ts_tlb_int_select = int_select;
+			cch->tlb_int_select = int_select;
+		} else {
+			for (i = 0; i < 8; i++)
+				cch->asid[i] = 0;
+			cch->tfm_fault_bit_enable = 0;
+			cch->tlb_int_enable = 0;
+			gts->ts_force_unload = 1;
+		}
+		if (cch_start(cch))
+			BUG();
+		ret = 1;
+	}
+exit:
+	unlock_cch_handle(cch);
+	return ret;
+}
+
+/*
+ * Update CCH tlb interrupt select. Required when all the following is true:
+ * 	- task's GRU context is loaded into a GRU
+ * 	- task is using interrupt notification for TLB faults
+ * 	- task has migrated to a different cpu on the same blade where
+ * 	  it was previously running.
+ */
+static int gru_retarget_intr(struct gru_thread_state *gts)
+{
+	if (gts->ts_tlb_int_select < 0
+	    || gts->ts_tlb_int_select == gru_cpu_fault_map_id())
+		return 0;
+
+	gru_dbg(grudev, "retarget from %d to %d\n", gts->ts_tlb_int_select,
+		gru_cpu_fault_map_id());
+	return gru_update_cch(gts, gru_cpu_fault_map_id());
+}
+
+
+/*
+ * Insufficient GRU resources available on the local blade. Steal a context from
+ * a process. This is a hack until a _real_ resource scheduler is written....
+ */
+#define next_ctxnum(n)	((n) <  GRU_NUM_CCH - 2 ? (n) + 1 : 0)
+#define next_gru(b, g)	(((g) < &(b)->bs_grus[GRU_CHIPLETS_PER_BLADE - 1]) ?  \
+				 ((g)+1) : &(b)->bs_grus[0])
+
+static void gru_steal_context(struct gru_thread_state *gts)
+{
+	struct gru_blade_state *blade;
+	struct gru_state *gru, *gru0;
+	struct gru_thread_state *ngts = NULL;
+	int ctxnum, ctxnum0, flag = 0, cbr, dsr;
+
+	cbr = gts->ts_cbr_au_count;
+	dsr = gts->ts_dsr_au_count;
+
+	preempt_disable();
+	blade = gru_base[uv_numa_blade_id()];
+	spin_lock(&blade->bs_lock);
+
+	ctxnum = next_ctxnum(blade->bs_lru_ctxnum);
+	gru = blade->bs_lru_gru;
+	if (ctxnum == 0)
+		gru = next_gru(blade, gru);
+	ctxnum0 = ctxnum;
+	gru0 = gru;
+	while (1) {
+		if (check_gru_resources(gru, cbr, dsr, GRU_NUM_CCH))
+			break;
+		spin_lock(&gru->gs_lock);
+		for (; ctxnum < GRU_NUM_CCH; ctxnum++) {
+			if (flag && gru == gru0 && ctxnum == ctxnum0)
+				break;
+			ngts = gru->gs_gts[ctxnum];
+			/*
+			 * We are grabbing locks out of order, so trylock is
+			 * needed. GTSs are usually not locked, so the odds of
+			 * success are high. If trylock fails, try to steal a
+			 * different GSEG.
+			 */
+			if (ngts && mutex_trylock(&ngts->ts_ctxlock))
+				break;
+			ngts = NULL;
+			flag = 1;
+		}
+		spin_unlock(&gru->gs_lock);
+		if (ngts || (flag && gru == gru0 && ctxnum == ctxnum0))
+			break;
+		ctxnum = 0;
+		gru = next_gru(blade, gru);
+	}
+	blade->bs_lru_gru = gru;
+	blade->bs_lru_ctxnum = ctxnum;
+	spin_unlock(&blade->bs_lock);
+	preempt_enable();
+
+	if (ngts) {
+		STAT(steal_context);
+		ngts->ts_steal_jiffies = jiffies;
+		gru_unload_context(ngts, 1);
+		mutex_unlock(&ngts->ts_ctxlock);
+	} else {
+		STAT(steal_context_failed);
+	}
+	gru_dbg(grudev,
+		"stole gru %x, ctxnum %d from gts %p. Need cb %d, ds %d;"
+		" avail cb %ld, ds %ld\n",
+		gru->gs_gid, ctxnum, ngts, cbr, dsr, hweight64(gru->gs_cbr_map),
+		hweight64(gru->gs_dsr_map));
+}
+
+/*
+ * Scan the GRUs on the local blade & assign a GRU context.
+ */
+static struct gru_state *gru_assign_gru_context(struct gru_thread_state *gts)
+{
+	struct gru_state *gru, *grux;
+	int i, max_active_contexts;
+
+	preempt_disable();
+
+again:
+	gru = NULL;
+	max_active_contexts = GRU_NUM_CCH;
+	for_each_gru_on_blade(grux, uv_numa_blade_id(), i) {
+		if (check_gru_resources(grux, gts->ts_cbr_au_count,
+					gts->ts_dsr_au_count,
+					max_active_contexts)) {
+			gru = grux;
+			max_active_contexts = grux->gs_active_contexts;
+			if (max_active_contexts == 0)
+				break;
+		}
+	}
+
+	if (gru) {
+		spin_lock(&gru->gs_lock);
+		if (!check_gru_resources(gru, gts->ts_cbr_au_count,
+					 gts->ts_dsr_au_count, GRU_NUM_CCH)) {
+			spin_unlock(&gru->gs_lock);
+			goto again;
+		}
+		reserve_gru_resources(gru, gts);
+		gts->ts_gru = gru;
+		gts->ts_ctxnum =
+		    find_first_zero_bit(&gru->gs_context_map, GRU_NUM_CCH);
+		BUG_ON(gts->ts_ctxnum == GRU_NUM_CCH);
+		atomic_inc(&gts->ts_refcnt);
+		gru->gs_gts[gts->ts_ctxnum] = gts;
+		__set_bit(gts->ts_ctxnum, &gru->gs_context_map);
+		spin_unlock(&gru->gs_lock);
+
+		STAT(assign_context);
+		gru_dbg(grudev,
+			"gseg %p, gts %p, gru %x, ctx %d, cbr %d, dsr %d\n",
+			gseg_virtual_address(gts->ts_gru, gts->ts_ctxnum), gts,
+			gts->ts_gru->gs_gid, gts->ts_ctxnum,
+			gts->ts_cbr_au_count, gts->ts_dsr_au_count);
+	} else {
+		gru_dbg(grudev, "failed to allocate a GTS %s\n", "");
+		STAT(assign_context_failed);
+	}
+
+	preempt_enable();
+	return gru;
+}
+
+/*
+ * gru_nopage
+ *
+ * Map the user's GRU segment
+ *
+ * 	Note: gru segments alway mmaped on GRU_GSEG_PAGESIZE boundaries.
+ */
+int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct gru_thread_state *gts;
+	unsigned long paddr, vaddr;
+
+	vaddr = (unsigned long)vmf->virtual_address;
+	gru_dbg(grudev, "vma %p, vaddr 0x%lx (0x%lx)\n",
+		vma, vaddr, GSEG_BASE(vaddr));
+	STAT(nopfn);
+
+	/* The following check ensures vaddr is a valid address in the VMA */
+	gts = gru_find_thread_state(vma, TSID(vaddr, vma));
+	if (!gts)
+		return VM_FAULT_SIGBUS;
+
+again:
+	preempt_disable();
+	mutex_lock(&gts->ts_ctxlock);
+	if (gts->ts_gru) {
+		if (gts->ts_gru->gs_blade_id != uv_numa_blade_id()) {
+			STAT(migrated_nopfn_unload);
+			gru_unload_context(gts, 1);
+		} else {
+			if (gru_retarget_intr(gts))
+				STAT(migrated_nopfn_retarget);
+		}
+	}
+
+	if (!gts->ts_gru) {
+		if (!gru_assign_gru_context(gts)) {
+			mutex_unlock(&gts->ts_ctxlock);
+			preempt_enable();
+			schedule_timeout(GRU_ASSIGN_DELAY);  /* true hack ZZZ */
+			if (gts->ts_steal_jiffies + GRU_STEAL_DELAY < jiffies)
+				gru_steal_context(gts);
+			goto again;
+		}
+		gru_load_context(gts);
+		paddr = gseg_physical_address(gts->ts_gru, gts->ts_ctxnum);
+		remap_pfn_range(vma, vaddr & ~(GRU_GSEG_PAGESIZE - 1),
+				paddr >> PAGE_SHIFT, GRU_GSEG_PAGESIZE,
+				vma->vm_page_prot);
+	}
+
+	mutex_unlock(&gts->ts_ctxlock);
+	preempt_enable();
+
+	return VM_FAULT_NOPAGE;
+}
+
diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c
new file mode 100644
index 00000000000..533923f83f1
--- /dev/null
+++ b/drivers/misc/sgi-gru/gruprocfs.c
@@ -0,0 +1,336 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              PROC INTERFACES
+ *
+ * This file supports the /proc interfaces for the GRU driver
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/proc_fs.h>
+#include <linux/device.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+
+#define printstat(s, f)		printstat_val(s, &gru_stats.f, #f)
+
+static void printstat_val(struct seq_file *s, atomic_long_t *v, char *id)
+{
+	unsigned long val = atomic_long_read(v);
+
+	if (val)
+		seq_printf(s, "%16lu %s\n", val, id);
+}
+
+static int statistics_show(struct seq_file *s, void *p)
+{
+	printstat(s, vdata_alloc);
+	printstat(s, vdata_free);
+	printstat(s, gts_alloc);
+	printstat(s, gts_free);
+	printstat(s, vdata_double_alloc);
+	printstat(s, gts_double_allocate);
+	printstat(s, assign_context);
+	printstat(s, assign_context_failed);
+	printstat(s, free_context);
+	printstat(s, load_context);
+	printstat(s, unload_context);
+	printstat(s, steal_context);
+	printstat(s, steal_context_failed);
+	printstat(s, nopfn);
+	printstat(s, break_cow);
+	printstat(s, asid_new);
+	printstat(s, asid_next);
+	printstat(s, asid_wrap);
+	printstat(s, asid_reuse);
+	printstat(s, intr);
+	printstat(s, call_os);
+	printstat(s, call_os_check_for_bug);
+	printstat(s, call_os_wait_queue);
+	printstat(s, user_flush_tlb);
+	printstat(s, user_unload_context);
+	printstat(s, user_exception);
+	printstat(s, set_task_slice);
+	printstat(s, migrate_check);
+	printstat(s, migrated_retarget);
+	printstat(s, migrated_unload);
+	printstat(s, migrated_unload_delay);
+	printstat(s, migrated_nopfn_retarget);
+	printstat(s, migrated_nopfn_unload);
+	printstat(s, tlb_dropin);
+	printstat(s, tlb_dropin_fail_no_asid);
+	printstat(s, tlb_dropin_fail_upm);
+	printstat(s, tlb_dropin_fail_invalid);
+	printstat(s, tlb_dropin_fail_range_active);
+	printstat(s, tlb_dropin_fail_idle);
+	printstat(s, tlb_dropin_fail_fmm);
+	printstat(s, mmu_invalidate_range);
+	printstat(s, mmu_invalidate_page);
+	printstat(s, mmu_clear_flush_young);
+	printstat(s, flush_tlb);
+	printstat(s, flush_tlb_gru);
+	printstat(s, flush_tlb_gru_tgh);
+	printstat(s, flush_tlb_gru_zero_asid);
+	printstat(s, copy_gpa);
+	printstat(s, mesq_receive);
+	printstat(s, mesq_receive_none);
+	printstat(s, mesq_send);
+	printstat(s, mesq_send_failed);
+	printstat(s, mesq_noop);
+	printstat(s, mesq_send_unexpected_error);
+	printstat(s, mesq_send_lb_overflow);
+	printstat(s, mesq_send_qlimit_reached);
+	printstat(s, mesq_send_amo_nacked);
+	printstat(s, mesq_send_put_nacked);
+	printstat(s, mesq_qf_not_full);
+	printstat(s, mesq_qf_locked);
+	printstat(s, mesq_qf_noop_not_full);
+	printstat(s, mesq_qf_switch_head_failed);
+	printstat(s, mesq_qf_unexpected_error);
+	printstat(s, mesq_noop_unexpected_error);
+	printstat(s, mesq_noop_lb_overflow);
+	printstat(s, mesq_noop_qlimit_reached);
+	printstat(s, mesq_noop_amo_nacked);
+	printstat(s, mesq_noop_put_nacked);
+	return 0;
+}
+
+static ssize_t statistics_write(struct file *file, const char __user *userbuf,
+				size_t count, loff_t *data)
+{
+	memset(&gru_stats, 0, sizeof(gru_stats));
+	return count;
+}
+
+static int options_show(struct seq_file *s, void *p)
+{
+	seq_printf(s, "0x%lx\n", gru_options);
+	return 0;
+}
+
+static ssize_t options_write(struct file *file, const char __user *userbuf,
+			     size_t count, loff_t *data)
+{
+	unsigned long val;
+	char buf[80];
+
+	if (copy_from_user
+	    (buf, userbuf, count < sizeof(buf) ? count : sizeof(buf)))
+		return -EFAULT;
+	if (!strict_strtoul(buf, 10, &val))
+		gru_options = val;
+
+	return count;
+}
+
+static int cch_seq_show(struct seq_file *file, void *data)
+{
+	long gid = *(long *)data;
+	int i;
+	struct gru_state *gru = GID_TO_GRU(gid);
+	struct gru_thread_state *ts;
+	const char *mode[] = { "??", "UPM", "INTR", "OS_POLL" };
+
+	if (gid == 0)
+		seq_printf(file, "#%5s%5s%6s%9s%6s%8s%8s\n", "gid", "bid",
+			   "ctx#", "pid", "cbrs", "dsbytes", "mode");
+	if (gru)
+		for (i = 0; i < GRU_NUM_CCH; i++) {
+			ts = gru->gs_gts[i];
+			if (!ts)
+				continue;
+			seq_printf(file, " %5d%5d%6d%9d%6d%8d%8s\n",
+				   gru->gs_gid, gru->gs_blade_id, i,
+				   ts->ts_tgid_owner,
+				   ts->ts_cbr_au_count * GRU_CBR_AU_SIZE,
+				   ts->ts_cbr_au_count * GRU_DSR_AU_BYTES,
+				   mode[ts->ts_user_options &
+					GRU_OPT_MISS_MASK]);
+		}
+
+	return 0;
+}
+
+static int gru_seq_show(struct seq_file *file, void *data)
+{
+	long gid = *(long *)data, ctxfree, cbrfree, dsrfree;
+	struct gru_state *gru = GID_TO_GRU(gid);
+
+	if (gid == 0) {
+		seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "gid", "nid",
+			   "ctx", "cbr", "dsr", "ctx", "cbr", "dsr");
+		seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "", "", "busy",
+			   "busy", "busy", "free", "free", "free");
+	}
+	if (gru) {
+		ctxfree = GRU_NUM_CCH - gru->gs_active_contexts;
+		cbrfree = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+		dsrfree = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES;
+		seq_printf(file, " %5d%5d%7ld%6ld%6ld%8ld%6ld%6ld\n",
+			   gru->gs_gid, gru->gs_blade_id, GRU_NUM_CCH - ctxfree,
+			   GRU_NUM_CBE - cbrfree, GRU_NUM_DSR_BYTES - dsrfree,
+			   ctxfree, cbrfree, dsrfree);
+	}
+
+	return 0;
+}
+
+static void seq_stop(struct seq_file *file, void *data)
+{
+}
+
+static void *seq_start(struct seq_file *file, loff_t *gid)
+{
+	if (*gid < GRU_MAX_GRUS)
+		return gid;
+	return NULL;
+}
+
+static void *seq_next(struct seq_file *file, void *data, loff_t *gid)
+{
+	(*gid)++;
+	if (*gid < GRU_MAX_GRUS)
+		return gid;
+	return NULL;
+}
+
+static const struct seq_operations cch_seq_ops = {
+	.start	= seq_start,
+	.next	= seq_next,
+	.stop	= seq_stop,
+	.show	= cch_seq_show
+};
+
+static const struct seq_operations gru_seq_ops = {
+	.start	= seq_start,
+	.next	= seq_next,
+	.stop	= seq_stop,
+	.show	= gru_seq_show
+};
+
+static int statistics_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, statistics_show, NULL);
+}
+
+static int options_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, options_show, NULL);
+}
+
+static int cch_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &cch_seq_ops);
+}
+
+static int gru_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &gru_seq_ops);
+}
+
+/* *INDENT-OFF* */
+static const struct file_operations statistics_fops = {
+	.open 		= statistics_open,
+	.read 		= seq_read,
+	.write 		= statistics_write,
+	.llseek 	= seq_lseek,
+	.release 	= single_release,
+};
+
+static const struct file_operations options_fops = {
+	.open 		= options_open,
+	.read 		= seq_read,
+	.write 		= options_write,
+	.llseek 	= seq_lseek,
+	.release 	= single_release,
+};
+
+static const struct file_operations cch_fops = {
+	.open 		= cch_open,
+	.read 		= seq_read,
+	.llseek 	= seq_lseek,
+	.release 	= seq_release,
+};
+static const struct file_operations gru_fops = {
+	.open 		= gru_open,
+	.read 		= seq_read,
+	.llseek 	= seq_lseek,
+	.release 	= seq_release,
+};
+
+static struct proc_entry {
+	char *name;
+	int mode;
+	const struct file_operations *fops;
+	struct proc_dir_entry *entry;
+} proc_files[] = {
+	{"statistics", 0644, &statistics_fops},
+	{"debug_options", 0644, &options_fops},
+	{"cch_status", 0444, &cch_fops},
+	{"gru_status", 0444, &gru_fops},
+	{NULL}
+};
+/* *INDENT-ON* */
+
+static struct proc_dir_entry *proc_gru __read_mostly;
+
+static int create_proc_file(struct proc_entry *p)
+{
+	p->entry = create_proc_entry(p->name, p->mode, proc_gru);
+	if (!p->entry)
+		return -1;
+	p->entry->proc_fops = p->fops;
+	return 0;
+}
+
+static void delete_proc_files(void)
+{
+	struct proc_entry *p;
+
+	if (proc_gru) {
+		for (p = proc_files; p->name; p++)
+			if (p->entry)
+				remove_proc_entry(p->name, proc_gru);
+		remove_proc_entry("gru", NULL);
+	}
+}
+
+int gru_proc_init(void)
+{
+	struct proc_entry *p;
+
+	proc_mkdir("sgi_uv", NULL);
+	proc_gru = proc_mkdir("sgi_uv/gru", NULL);
+
+	for (p = proc_files; p->name; p++)
+		if (create_proc_file(p))
+			goto err;
+	return 0;
+
+err:
+	delete_proc_files();
+	return -1;
+}
+
+void gru_proc_exit(void)
+{
+	delete_proc_files();
+}
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
new file mode 100644
index 00000000000..a78f70deeb5
--- /dev/null
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -0,0 +1,609 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *            GRU DRIVER TABLES, MACROS, externs, etc
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRUTABLES_H__
+#define __GRUTABLES_H__
+
+/*
+ * GRU Chiplet:
+ *   The GRU is a user addressible memory accelerator. It provides
+ *   several forms of load, store, memset, bcopy instructions. In addition, it
+ *   contains special instructions for AMOs, sending messages to message
+ *   queues, etc.
+ *
+ *   The GRU is an integral part of the node controller. It connects
+ *   directly to the cpu socket. In its current implementation, there are 2
+ *   GRU chiplets in the node controller on each blade (~node).
+ *
+ *   The entire GRU memory space is fully coherent and cacheable by the cpus.
+ *
+ *   Each GRU chiplet has a physical memory map that looks like the following:
+ *
+ *   	+-----------------+
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	+-----------------+
+ *   	|  system control |
+ *   	+-----------------+        _______ +-------------+
+ *   	|/////////////////|       /        |             |
+ *   	|/////////////////|      /         |             |
+ *   	|/////////////////|     /          | instructions|
+ *   	|/////////////////|    /           |             |
+ *   	|/////////////////|   /            |             |
+ *   	|/////////////////|  /             |-------------|
+ *   	|/////////////////| /              |             |
+ *   	+-----------------+                |             |
+ *   	|   context 15    |                |  data       |
+ *   	+-----------------+                |             |
+ *   	|    ......       | \              |             |
+ *   	+-----------------+  \____________ +-------------+
+ *   	|   context 1     |
+ *   	+-----------------+
+ *   	|   context 0     |
+ *   	+-----------------+
+ *
+ *   Each of the "contexts" is a chunk of memory that can be mmaped into user
+ *   space. The context consists of 2 parts:
+ *
+ *  	- an instruction space that can be directly accessed by the user
+ *  	  to issue GRU instructions and to check instruction status.
+ *
+ *  	- a data area that acts as normal RAM.
+ *
+ *   User instructions contain virtual addresses of data to be accessed by the
+ *   GRU. The GRU contains a TLB that is used to convert these user virtual
+ *   addresses to physical addresses.
+ *
+ *   The "system control" area of the GRU chiplet is used by the kernel driver
+ *   to manage user contexts and to perform functions such as TLB dropin and
+ *   purging.
+ *
+ *   One context may be reserved for the kernel and used for cross-partition
+ *   communication. The GRU will also be used to asynchronously zero out
+ *   large blocks of memory (not currently implemented).
+ *
+ *
+ * Tables:
+ *
+ * 	VDATA-VMA Data		- Holds a few parameters. Head of linked list of
+ * 				  GTS tables for threads using the GSEG
+ * 	GTS - Gru Thread State  - contains info for managing a GSEG context. A
+ * 				  GTS is allocated for each thread accessing a
+ * 				  GSEG.
+ *     	GTD - GRU Thread Data   - contains shadow copy of GRU data when GSEG is
+ *     				  not loaded into a GRU
+ *	GMS - GRU Memory Struct - Used to manage TLB shootdowns. Tracks GRUs
+ *				  where a GSEG has been loaded. Similar to
+ *				  an mm_struct but for GRU.
+ *
+ *	GS  - GRU State 	- Used to manage the state of a GRU chiplet
+ *	BS  - Blade State	- Used to manage state of all GRU chiplets
+ *				  on a blade
+ *
+ *
+ *  Normal task tables for task using GRU.
+ *  		- 2 threads in process
+ *  		- 2 GSEGs open in process
+ *  		- GSEG1 is being used by both threads
+ *  		- GSEG2 is used only by thread 2
+ *
+ *       task -->|
+ *       task ---+---> mm ->------ (notifier) -------+-> gms
+ *                     |                             |
+ *                     |--> vma -> vdata ---> gts--->|		GSEG1 (thread1)
+ *                     |                  |          |
+ *                     |                  +-> gts--->|		GSEG1 (thread2)
+ *                     |                             |
+ *                     |--> vma -> vdata ---> gts--->|		GSEG2 (thread2)
+ *                     .
+ *                     .
+ *
+ *  GSEGs are marked DONTCOPY on fork
+ *
+ * At open
+ * 	file.private_data -> NULL
+ *
+ * At mmap,
+ * 	vma -> vdata
+ *
+ * After gseg reference
+ * 	vma -> vdata ->gts
+ *
+ * After fork
+ *   parent
+ * 	vma -> vdata -> gts
+ *   child
+ * 	(vma is not copied)
+ *
+ */
+
+#include <linux/rmap.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/mmu_notifier.h>
+#include "gru.h"
+#include "gruhandles.h"
+
+extern struct gru_stats_s gru_stats;
+extern struct gru_blade_state *gru_base[];
+extern unsigned long gru_start_paddr, gru_end_paddr;
+
+#define GRU_MAX_BLADES		MAX_NUMNODES
+#define GRU_MAX_GRUS		(GRU_MAX_BLADES * GRU_CHIPLETS_PER_BLADE)
+
+#define GRU_DRIVER_ID_STR	"SGI GRU Device Driver"
+#define GRU_DRIVER_VERSION_STR	"0.80"
+
+/*
+ * GRU statistics.
+ */
+struct gru_stats_s {
+	atomic_long_t vdata_alloc;
+	atomic_long_t vdata_free;
+	atomic_long_t gts_alloc;
+	atomic_long_t gts_free;
+	atomic_long_t vdata_double_alloc;
+	atomic_long_t gts_double_allocate;
+	atomic_long_t assign_context;
+	atomic_long_t assign_context_failed;
+	atomic_long_t free_context;
+	atomic_long_t load_context;
+	atomic_long_t unload_context;
+	atomic_long_t steal_context;
+	atomic_long_t steal_context_failed;
+	atomic_long_t nopfn;
+	atomic_long_t break_cow;
+	atomic_long_t asid_new;
+	atomic_long_t asid_next;
+	atomic_long_t asid_wrap;
+	atomic_long_t asid_reuse;
+	atomic_long_t intr;
+	atomic_long_t call_os;
+	atomic_long_t call_os_check_for_bug;
+	atomic_long_t call_os_wait_queue;
+	atomic_long_t user_flush_tlb;
+	atomic_long_t user_unload_context;
+	atomic_long_t user_exception;
+	atomic_long_t set_task_slice;
+	atomic_long_t migrate_check;
+	atomic_long_t migrated_retarget;
+	atomic_long_t migrated_unload;
+	atomic_long_t migrated_unload_delay;
+	atomic_long_t migrated_nopfn_retarget;
+	atomic_long_t migrated_nopfn_unload;
+	atomic_long_t tlb_dropin;
+	atomic_long_t tlb_dropin_fail_no_asid;
+	atomic_long_t tlb_dropin_fail_upm;
+	atomic_long_t tlb_dropin_fail_invalid;
+	atomic_long_t tlb_dropin_fail_range_active;
+	atomic_long_t tlb_dropin_fail_idle;
+	atomic_long_t tlb_dropin_fail_fmm;
+	atomic_long_t mmu_invalidate_range;
+	atomic_long_t mmu_invalidate_page;
+	atomic_long_t mmu_clear_flush_young;
+	atomic_long_t flush_tlb;
+	atomic_long_t flush_tlb_gru;
+	atomic_long_t flush_tlb_gru_tgh;
+	atomic_long_t flush_tlb_gru_zero_asid;
+
+	atomic_long_t copy_gpa;
+
+	atomic_long_t mesq_receive;
+	atomic_long_t mesq_receive_none;
+	atomic_long_t mesq_send;
+	atomic_long_t mesq_send_failed;
+	atomic_long_t mesq_noop;
+	atomic_long_t mesq_send_unexpected_error;
+	atomic_long_t mesq_send_lb_overflow;
+	atomic_long_t mesq_send_qlimit_reached;
+	atomic_long_t mesq_send_amo_nacked;
+	atomic_long_t mesq_send_put_nacked;
+	atomic_long_t mesq_qf_not_full;
+	atomic_long_t mesq_qf_locked;
+	atomic_long_t mesq_qf_noop_not_full;
+	atomic_long_t mesq_qf_switch_head_failed;
+	atomic_long_t mesq_qf_unexpected_error;
+	atomic_long_t mesq_noop_unexpected_error;
+	atomic_long_t mesq_noop_lb_overflow;
+	atomic_long_t mesq_noop_qlimit_reached;
+	atomic_long_t mesq_noop_amo_nacked;
+	atomic_long_t mesq_noop_put_nacked;
+
+};
+
+#define OPT_DPRINT	1
+#define OPT_STATS	2
+#define GRU_QUICKLOOK	4
+
+
+#define IRQ_GRU			110	/* Starting IRQ number for interrupts */
+
+/* Delay in jiffies between attempts to assign a GRU context */
+#define GRU_ASSIGN_DELAY	((HZ * 20) / 1000)
+
+/*
+ * If a process has it's context stolen, min delay in jiffies before trying to
+ * steal a context from another process.
+ */
+#define GRU_STEAL_DELAY		((HZ * 200) / 1000)
+
+#define STAT(id)	do {						\
+				if (gru_options & OPT_STATS)		\
+					atomic_long_inc(&gru_stats.id);	\
+			} while (0)
+
+#ifdef CONFIG_SGI_GRU_DEBUG
+#define gru_dbg(dev, fmt, x...)						\
+	do {								\
+		if (gru_options & OPT_DPRINT)				\
+			dev_dbg(dev, "%s: " fmt, __func__, x);		\
+	} while (0)
+#else
+#define gru_dbg(x...)
+#endif
+
+/*-----------------------------------------------------------------------------
+ * ASID management
+ */
+#define MAX_ASID	0xfffff0
+#define MIN_ASID	8
+#define ASID_INC	8	/* number of regions */
+
+/* Generate a GRU asid value from a GRU base asid & a virtual address. */
+#if defined CONFIG_IA64
+#define VADDR_HI_BIT		64
+#define GRUREGION(addr)		((addr) >> (VADDR_HI_BIT - 3) & 3)
+#elif defined CONFIG_X86_64
+#define VADDR_HI_BIT		48
+#define GRUREGION(addr)		(0)		/* ZZZ could do better */
+#else
+#error "Unsupported architecture"
+#endif
+#define GRUASID(asid, addr)	((asid) + GRUREGION(addr))
+
+/*------------------------------------------------------------------------------
+ *  File & VMS Tables
+ */
+
+struct gru_state;
+
+/*
+ * This structure is pointed to from the mmstruct via the notifier pointer.
+ * There is one of these per address space.
+ */
+struct gru_mm_tracker {
+	unsigned int		mt_asid_gen;	/* ASID wrap count */
+	int			mt_asid;	/* current base ASID for gru */
+	unsigned short		mt_ctxbitmap;	/* bitmap of contexts using
+						   asid */
+};
+
+struct gru_mm_struct {
+	struct mmu_notifier	ms_notifier;
+	atomic_t		ms_refcnt;
+	spinlock_t		ms_asid_lock;	/* protects ASID assignment */
+	atomic_t		ms_range_active;/* num range_invals active */
+	char			ms_released;
+	wait_queue_head_t	ms_wait_queue;
+	DECLARE_BITMAP(ms_asidmap, GRU_MAX_GRUS);
+	struct gru_mm_tracker	ms_asids[GRU_MAX_GRUS];
+};
+
+/*
+ * One of these structures is allocated when a GSEG is mmaped. The
+ * structure is pointed to by the vma->vm_private_data field in the vma struct.
+ */
+struct gru_vma_data {
+	spinlock_t		vd_lock;	/* Serialize access to vma */
+	struct list_head	vd_head;	/* head of linked list of gts */
+	long			vd_user_options;/* misc user option flags */
+	int			vd_cbr_au_count;
+	int			vd_dsr_au_count;
+};
+
+/*
+ * One of these is allocated for each thread accessing a mmaped GRU. A linked
+ * list of these structure is hung off the struct gru_vma_data in the mm_struct.
+ */
+struct gru_thread_state {
+	struct list_head	ts_next;	/* list - head at vma-private */
+	struct mutex		ts_ctxlock;	/* load/unload CTX lock */
+	struct mm_struct	*ts_mm;		/* mm currently mapped to
+						   context */
+	struct vm_area_struct	*ts_vma;	/* vma of GRU context */
+	struct gru_state	*ts_gru;	/* GRU where the context is
+						   loaded */
+	struct gru_mm_struct	*ts_gms;	/* asid & ioproc struct */
+	unsigned long		ts_cbr_map;	/* map of allocated CBRs */
+	unsigned long		ts_dsr_map;	/* map of allocated DATA
+						   resources */
+	unsigned long		ts_steal_jiffies;/* jiffies when context last
+						    stolen */
+	long			ts_user_options;/* misc user option flags */
+	pid_t			ts_tgid_owner;	/* task that is using the
+						   context - for migration */
+	int			ts_tsid;	/* thread that owns the
+						   structure */
+	int			ts_tlb_int_select;/* target cpu if interrupts
+						     enabled */
+	int			ts_ctxnum;	/* context number where the
+						   context is loaded */
+	atomic_t		ts_refcnt;	/* reference count GTS */
+	unsigned char		ts_dsr_au_count;/* Number of DSR resources
+						   required for contest */
+	unsigned char		ts_cbr_au_count;/* Number of CBR resources
+						   required for contest */
+	char			ts_force_unload;/* force context to be unloaded
+						   after migration */
+	char			ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each
+							  allocated CB */
+	unsigned long		ts_gdata[0];	/* save area for GRU data (CB,
+						   DS, CBE) */
+};
+
+/*
+ * Threaded programs actually allocate an array of GSEGs when a context is
+ * created. Each thread uses a separate GSEG. TSID is the index into the GSEG
+ * array.
+ */
+#define TSID(a, v)		(((a) - (v)->vm_start) / GRU_GSEG_PAGESIZE)
+#define UGRUADDR(gts)		((gts)->ts_vma->vm_start +		\
+					(gts)->ts_tsid * GRU_GSEG_PAGESIZE)
+
+#define NULLCTX			(-1)	/* if context not loaded into GRU */
+
+/*-----------------------------------------------------------------------------
+ *  GRU State Tables
+ */
+
+/*
+ * One of these exists for each GRU chiplet.
+ */
+struct gru_state {
+	struct gru_blade_state	*gs_blade;		/* GRU state for entire
+							   blade */
+	unsigned long		gs_gru_base_paddr;	/* Physical address of
+							   gru segments (64) */
+	void			*gs_gru_base_vaddr;	/* Virtual address of
+							   gru segments (64) */
+	unsigned char		gs_gid;			/* unique GRU number */
+	unsigned char		gs_tgh_local_shift;	/* used to pick TGH for
+							   local flush */
+	unsigned char		gs_tgh_first_remote;	/* starting TGH# for
+							   remote flush */
+	unsigned short		gs_blade_id;		/* blade of GRU */
+	spinlock_t		gs_asid_lock;		/* lock used for
+							   assigning asids */
+	spinlock_t		gs_lock;		/* lock used for
+							   assigning contexts */
+
+	/* -- the following are protected by the gs_asid_lock spinlock ---- */
+	unsigned int		gs_asid;		/* Next availe ASID */
+	unsigned int		gs_asid_limit;		/* Limit of available
+							   ASIDs */
+	unsigned int		gs_asid_gen;		/* asid generation.
+							   Inc on wrap */
+
+	/* --- the following fields are protected by the gs_lock spinlock --- */
+	unsigned long		gs_context_map;		/* bitmap to manage
+							   contexts in use */
+	unsigned long		gs_cbr_map;		/* bitmap to manage CB
+							   resources */
+	unsigned long		gs_dsr_map;		/* bitmap used to manage
+							   DATA resources */
+	unsigned int		gs_reserved_cbrs;	/* Number of kernel-
+							   reserved cbrs */
+	unsigned int		gs_reserved_dsr_bytes;	/* Bytes of kernel-
+							   reserved dsrs */
+	unsigned short		gs_active_contexts;	/* number of contexts
+							   in use */
+	struct gru_thread_state	*gs_gts[GRU_NUM_CCH];	/* GTS currently using
+							   the context */
+};
+
+/*
+ * This structure contains the GRU state for all the GRUs on a blade.
+ */
+struct gru_blade_state {
+	void			*kernel_cb;		/* First kernel
+							   reserved cb */
+	void			*kernel_dsr;		/* First kernel
+							   reserved DSR */
+	/* ---- the following are protected by the bs_lock spinlock ---- */
+	spinlock_t		bs_lock;		/* lock used for
+							   stealing contexts */
+	int			bs_lru_ctxnum;		/* STEAL - last context
+							   stolen */
+	struct gru_state	*bs_lru_gru;		/* STEAL - last gru
+							   stolen */
+
+	struct gru_state	bs_grus[GRU_CHIPLETS_PER_BLADE];
+};
+
+/*-----------------------------------------------------------------------------
+ * Address Primitives
+ */
+#define get_tfm_for_cpu(g, c)						\
+	((struct gru_tlb_fault_map *)get_tfm((g)->gs_gru_base_vaddr, (c)))
+#define get_tfh_by_index(g, i)						\
+	((struct gru_tlb_fault_handle *)get_tfh((g)->gs_gru_base_vaddr, (i)))
+#define get_tgh_by_index(g, i)						\
+	((struct gru_tlb_global_handle *)get_tgh((g)->gs_gru_base_vaddr, (i)))
+#define get_cbe_by_index(g, i)						\
+	((struct gru_control_block_extended *)get_cbe((g)->gs_gru_base_vaddr,\
+			(i)))
+
+/*-----------------------------------------------------------------------------
+ * Useful Macros
+ */
+
+/* Given a blade# & chiplet#, get a pointer to the GRU */
+#define get_gru(b, c)		(&gru_base[b]->bs_grus[c])
+
+/* Number of bytes to save/restore when unloading/loading GRU contexts */
+#define DSR_BYTES(dsr)		((dsr) * GRU_DSR_AU_BYTES)
+#define CBR_BYTES(cbr)		((cbr) * GRU_HANDLE_BYTES * GRU_CBR_AU_SIZE * 2)
+
+/* Convert a user CB number to the actual CBRNUM */
+#define thread_cbr_number(gts, n) ((gts)->ts_cbr_idx[(n) / GRU_CBR_AU_SIZE] \
+				  * GRU_CBR_AU_SIZE + (n) % GRU_CBR_AU_SIZE)
+
+/* Convert a gid to a pointer to the GRU */
+#define GID_TO_GRU(gid)							\
+	(gru_base[(gid) / GRU_CHIPLETS_PER_BLADE] ?			\
+		(&gru_base[(gid) / GRU_CHIPLETS_PER_BLADE]->		\
+			bs_grus[(gid) % GRU_CHIPLETS_PER_BLADE]) :	\
+	 NULL)
+
+/* Scan all active GRUs in a GRU bitmap */
+#define for_each_gru_in_bitmap(gid, map)				\
+	for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\
+		(gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid)))
+
+/* Scan all active GRUs on a specific blade */
+#define for_each_gru_on_blade(gru, nid, i)				\
+	for ((gru) = gru_base[nid]->bs_grus, (i) = 0;			\
+			(i) < GRU_CHIPLETS_PER_BLADE;			\
+			(i)++, (gru)++)
+
+/* Scan all active GTSs on a gru. Note: must hold ss_lock to use this macro. */
+#define for_each_gts_on_gru(gts, gru, ctxnum)				\
+	for ((ctxnum) = 0; (ctxnum) < GRU_NUM_CCH; (ctxnum)++)		\
+		if (((gts) = (gru)->gs_gts[ctxnum]))
+
+/* Scan each CBR whose bit is set in a TFM (or copy of) */
+#define for_each_cbr_in_tfm(i, map)					\
+	for ((i) = find_first_bit(map, GRU_NUM_CBE);			\
+			(i) < GRU_NUM_CBE;				\
+			(i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i))
+
+/* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */
+#define for_each_cbr_in_allocation_map(i, map, k)			\
+	for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU;	\
+			(k) = find_next_bit(map, GRU_CBR_AU, (k) + 1)) 	\
+		for ((i) = (k)*GRU_CBR_AU_SIZE;				\
+				(i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++)
+
+/* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */
+#define for_each_dsr_in_allocation_map(i, map, k)			\
+	for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\
+			(k) < GRU_DSR_AU;				\
+			(k) = find_next_bit((const unsigned long *)map,	\
+					  GRU_DSR_AU, (k) + 1))		\
+		for ((i) = (k) * GRU_DSR_AU_CL;				\
+				(i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++)
+
+#define gseg_physical_address(gru, ctxnum)				\
+		((gru)->gs_gru_base_paddr + ctxnum * GRU_GSEG_STRIDE)
+#define gseg_virtual_address(gru, ctxnum)				\
+		((gru)->gs_gru_base_vaddr + ctxnum * GRU_GSEG_STRIDE)
+
+/*-----------------------------------------------------------------------------
+ * Lock / Unlock GRU handles
+ * 	Use the "delresp" bit in the handle as a "lock" bit.
+ */
+
+/* Lock hierarchy checking enabled only in emulator */
+
+static inline void __lock_handle(void *h)
+{
+	while (test_and_set_bit(1, h))
+		cpu_relax();
+}
+
+static inline void __unlock_handle(void *h)
+{
+	clear_bit(1, h);
+}
+
+static inline void lock_cch_handle(struct gru_context_configuration_handle *cch)
+{
+	__lock_handle(cch);
+}
+
+static inline void unlock_cch_handle(struct gru_context_configuration_handle
+				     *cch)
+{
+	__unlock_handle(cch);
+}
+
+static inline void lock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+	__lock_handle(tgh);
+}
+
+static inline void unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+	__unlock_handle(tgh);
+}
+
+/*-----------------------------------------------------------------------------
+ * Function prototypes & externs
+ */
+struct gru_unload_context_req;
+
+extern struct vm_operations_struct gru_vm_ops;
+extern struct device *grudev;
+
+extern struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma,
+				int tsid);
+extern struct gru_thread_state *gru_find_thread_state(struct vm_area_struct
+				*vma, int tsid);
+extern struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct
+				*vma, int tsid);
+extern void gru_unload_context(struct gru_thread_state *gts, int savestate);
+extern void gts_drop(struct gru_thread_state *gts);
+extern void gru_tgh_flush_init(struct gru_state *gru);
+extern int gru_kservices_init(struct gru_state *gru);
+extern irqreturn_t gru_intr(int irq, void *dev_id);
+extern int gru_handle_user_call_os(unsigned long address);
+extern int gru_user_flush_tlb(unsigned long arg);
+extern int gru_user_unload_context(unsigned long arg);
+extern int gru_get_exception_detail(unsigned long arg);
+extern int gru_set_task_slice(long address);
+extern int gru_cpu_fault_map_id(void);
+extern struct vm_area_struct *gru_find_vma(unsigned long vaddr);
+extern void gru_flush_all_tlb(struct gru_state *gru);
+extern int gru_proc_init(void);
+extern void gru_proc_exit(void);
+
+extern unsigned long gru_reserve_cb_resources(struct gru_state *gru,
+		int cbr_au_count, char *cbmap);
+extern unsigned long gru_reserve_ds_resources(struct gru_state *gru,
+		int dsr_au_count, char *dsmap);
+extern int gru_fault(struct vm_area_struct *, struct vm_fault *vmf);
+extern struct gru_mm_struct *gru_register_mmu_notifier(void);
+extern void gru_drop_mmu_notifier(struct gru_mm_struct *gms);
+
+extern void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
+					unsigned long len);
+
+extern unsigned long gru_options;
+
+#endif /* __GRUTABLES_H__ */
diff --git a/drivers/misc/sgi-gru/grutlbpurge.c b/drivers/misc/sgi-gru/grutlbpurge.c
new file mode 100644
index 00000000000..c84496a7769
--- /dev/null
+++ b/drivers/misc/sgi-gru/grutlbpurge.c
@@ -0,0 +1,371 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * 		MMUOPS callbacks  + TLB flushing
+ *
+ * This file handles emu notifier callbacks from the core kernel. The callbacks
+ * are used to update the TLB in the GRU as a result of changes in the
+ * state of a process address space. This file also handles TLB invalidates
+ * from the GRU driver.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/hugetlb.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
+#include <linux/srcu.h>
+#include <asm/processor.h>
+#include "gru.h"
+#include "grutables.h"
+#include <asm/uv/uv_hub.h>
+
+#define gru_random()	get_cycles()
+
+/* ---------------------------------- TLB Invalidation functions --------
+ * get_tgh_handle
+ *
+ * Find a TGH to use for issuing a TLB invalidate. For GRUs that are on the
+ * local blade, use a fixed TGH that is a function of the blade-local cpu
+ * number. Normally, this TGH is private to the cpu & no contention occurs for
+ * the TGH. For offblade GRUs, select a random TGH in the range above the
+ * private TGHs. A spinlock is required to access this TGH & the lock must be
+ * released when the invalidate is completes. This sucks, but it is the best we
+ * can do.
+ *
+ * Note that the spinlock is IN the TGH handle so locking does not involve
+ * additional cache lines.
+ *
+ */
+static inline int get_off_blade_tgh(struct gru_state *gru)
+{
+	int n;
+
+	n = GRU_NUM_TGH - gru->gs_tgh_first_remote;
+	n = gru_random() % n;
+	n += gru->gs_tgh_first_remote;
+	return n;
+}
+
+static inline int get_on_blade_tgh(struct gru_state *gru)
+{
+	return uv_blade_processor_id() >> gru->gs_tgh_local_shift;
+}
+
+static struct gru_tlb_global_handle *get_lock_tgh_handle(struct gru_state
+							 *gru)
+{
+	struct gru_tlb_global_handle *tgh;
+	int n;
+
+	preempt_disable();
+	if (uv_numa_blade_id() == gru->gs_blade_id)
+		n = get_on_blade_tgh(gru);
+	else
+		n = get_off_blade_tgh(gru);
+	tgh = get_tgh_by_index(gru, n);
+	lock_tgh_handle(tgh);
+
+	return tgh;
+}
+
+static void get_unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+	unlock_tgh_handle(tgh);
+	preempt_enable();
+}
+
+/*
+ * gru_flush_tlb_range
+ *
+ * General purpose TLB invalidation function. This function scans every GRU in
+ * the ENTIRE system (partition) looking for GRUs where the specified MM has
+ * been accessed by the GRU. For each GRU found, the TLB must be invalidated OR
+ * the ASID invalidated. Invalidating an ASID causes a new ASID to be assigned
+ * on the next fault. This effectively flushes the ENTIRE TLB for the MM at the
+ * cost of (possibly) a large number of future TLBmisses.
+ *
+ * The current algorithm is optimized based on the following (somewhat true)
+ * assumptions:
+ * 	- GRU contexts are not loaded into a GRU unless a reference is made to
+ * 	  the data segment or control block (this is true, not an assumption).
+ * 	  If a DS/CB is referenced, the user will also issue instructions that
+ * 	  cause TLBmisses. It is not necessary to optimize for the case where
+ * 	  contexts are loaded but no instructions cause TLB misses. (I know
+ * 	  this will happen but I'm not optimizing for it).
+ * 	- GRU instructions to invalidate TLB entries are SLOOOOWWW - normally
+ * 	  a few usec but in unusual cases, it could be longer. Avoid if
+ * 	  possible.
+ * 	- intrablade process migration between cpus is not frequent but is
+ * 	  common.
+ * 	- a GRU context is not typically migrated to a different GRU on the
+ * 	  blade because of intrablade migration
+ *	- interblade migration is rare. Processes migrate their GRU context to
+ *	  the new blade.
+ *	- if interblade migration occurs, migration back to the original blade
+ *	  is very very rare (ie., no optimization for this case)
+ *	- most GRU instruction operate on a subset of the user REGIONS. Code
+ *	  & shared library regions are not likely targets of GRU instructions.
+ *
+ * To help improve the efficiency of TLB invalidation, the GMS data
+ * structure is maintained for EACH address space (MM struct). The GMS is
+ * also the structure that contains the pointer to the mmu callout
+ * functions. This structure is linked to the mm_struct for the address space
+ * using the mmu "register" function. The mmu interfaces are used to
+ * provide the callbacks for TLB invalidation. The GMS contains:
+ *
+ * 	- asid[maxgrus] array. ASIDs are assigned to a GRU when a context is
+ * 	  loaded into the GRU.
+ * 	- asidmap[maxgrus]. bitmap to make it easier to find non-zero asids in
+ * 	  the above array
+ *	- ctxbitmap[maxgrus]. Indicates the contexts that are currently active
+ *	  in the GRU for the address space. This bitmap must be passed to the
+ *	  GRU to do an invalidate.
+ *
+ * The current algorithm for invalidating TLBs is:
+ * 	- scan the asidmap for GRUs where the context has been loaded, ie,
+ * 	  asid is non-zero.
+ * 	- for each gru found:
+ * 		- if the ctxtmap is non-zero, there are active contexts in the
+ * 		  GRU. TLB invalidate instructions must be issued to the GRU.
+ *		- if the ctxtmap is zero, no context is active. Set the ASID to
+ *		  zero to force a full TLB invalidation. This is fast but will
+ *		  cause a lot of TLB misses if the context is reloaded onto the
+ *		  GRU
+ *
+ */
+
+void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
+			 unsigned long len)
+{
+	struct gru_state *gru;
+	struct gru_mm_tracker *asids;
+	struct gru_tlb_global_handle *tgh;
+	unsigned long num;
+	int grupagesize, pagesize, pageshift, gid, asid;
+
+	/* ZZZ TODO - handle huge pages */
+	pageshift = PAGE_SHIFT;
+	pagesize = (1UL << pageshift);
+	grupagesize = GRU_PAGESIZE(pageshift);
+	num = min(((len + pagesize - 1) >> pageshift), GRUMAXINVAL);
+
+	STAT(flush_tlb);
+	gru_dbg(grudev, "gms %p, start 0x%lx, len 0x%lx, asidmap 0x%lx\n", gms,
+		start, len, gms->ms_asidmap[0]);
+
+	spin_lock(&gms->ms_asid_lock);
+	for_each_gru_in_bitmap(gid, gms->ms_asidmap) {
+		STAT(flush_tlb_gru);
+		gru = GID_TO_GRU(gid);
+		asids = gms->ms_asids + gid;
+		asid = asids->mt_asid;
+		if (asids->mt_ctxbitmap && asid) {
+			STAT(flush_tlb_gru_tgh);
+			asid = GRUASID(asid, start);
+			gru_dbg(grudev,
+	"  FLUSH gruid %d, asid 0x%x, num %ld, cbmap 0x%x\n",
+				gid, asid, num, asids->mt_ctxbitmap);
+			tgh = get_lock_tgh_handle(gru);
+			tgh_invalidate(tgh, start, 0, asid, grupagesize, 0,
+				       num - 1, asids->mt_ctxbitmap);
+			get_unlock_tgh_handle(tgh);
+		} else {
+			STAT(flush_tlb_gru_zero_asid);
+			asids->mt_asid = 0;
+			__clear_bit(gru->gs_gid, gms->ms_asidmap);
+			gru_dbg(grudev,
+	"  CLEARASID gruid %d, asid 0x%x, cbtmap 0x%x, asidmap 0x%lx\n",
+				gid, asid, asids->mt_ctxbitmap,
+				gms->ms_asidmap[0]);
+		}
+	}
+	spin_unlock(&gms->ms_asid_lock);
+}
+
+/*
+ * Flush the entire TLB on a chiplet.
+ */
+void gru_flush_all_tlb(struct gru_state *gru)
+{
+	struct gru_tlb_global_handle *tgh;
+
+	gru_dbg(grudev, "gru %p, gid %d\n", gru, gru->gs_gid);
+	tgh = get_lock_tgh_handle(gru);
+	tgh_invalidate(tgh, 0, ~0, 0, 1, 1, GRUMAXINVAL - 1, 0);
+	get_unlock_tgh_handle(tgh);
+	preempt_enable();
+}
+
+/*
+ * MMUOPS notifier callout functions
+ */
+static void gru_invalidate_range_start(struct mmu_notifier *mn,
+				       struct mm_struct *mm,
+				       unsigned long start, unsigned long end)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	STAT(mmu_invalidate_range);
+	atomic_inc(&gms->ms_range_active);
+	gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx, act %d\n", gms,
+		start, end, atomic_read(&gms->ms_range_active));
+	gru_flush_tlb_range(gms, start, end - start);
+}
+
+static void gru_invalidate_range_end(struct mmu_notifier *mn,
+				     struct mm_struct *mm, unsigned long start,
+				     unsigned long end)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	/* ..._and_test() provides needed barrier */
+	(void)atomic_dec_and_test(&gms->ms_range_active);
+
+	wake_up_all(&gms->ms_wait_queue);
+	gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx\n", gms, start, end);
+}
+
+static void gru_invalidate_page(struct mmu_notifier *mn, struct mm_struct *mm,
+				unsigned long address)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	STAT(mmu_invalidate_page);
+	gru_flush_tlb_range(gms, address, PAGE_SIZE);
+	gru_dbg(grudev, "gms %p, address 0x%lx\n", gms, address);
+}
+
+static void gru_release(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	gms->ms_released = 1;
+	gru_dbg(grudev, "gms %p\n", gms);
+}
+
+
+static const struct mmu_notifier_ops gru_mmuops = {
+	.invalidate_page	= gru_invalidate_page,
+	.invalidate_range_start	= gru_invalidate_range_start,
+	.invalidate_range_end	= gru_invalidate_range_end,
+	.release		= gru_release,
+};
+
+/* Move this to the basic mmu_notifier file. But for now... */
+static struct mmu_notifier *mmu_find_ops(struct mm_struct *mm,
+			const struct mmu_notifier_ops *ops)
+{
+	struct mmu_notifier *mn, *gru_mn = NULL;
+	struct hlist_node *n;
+
+	if (mm->mmu_notifier_mm) {
+		rcu_read_lock();
+		hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list,
+					 hlist)
+		    if (mn->ops == ops) {
+			gru_mn = mn;
+			break;
+		}
+		rcu_read_unlock();
+	}
+	return gru_mn;
+}
+
+struct gru_mm_struct *gru_register_mmu_notifier(void)
+{
+	struct gru_mm_struct *gms;
+	struct mmu_notifier *mn;
+
+	mn = mmu_find_ops(current->mm, &gru_mmuops);
+	if (mn) {
+		gms = container_of(mn, struct gru_mm_struct, ms_notifier);
+		atomic_inc(&gms->ms_refcnt);
+	} else {
+		gms = kzalloc(sizeof(*gms), GFP_KERNEL);
+		if (gms) {
+			spin_lock_init(&gms->ms_asid_lock);
+			gms->ms_notifier.ops = &gru_mmuops;
+			atomic_set(&gms->ms_refcnt, 1);
+			init_waitqueue_head(&gms->ms_wait_queue);
+			__mmu_notifier_register(&gms->ms_notifier, current->mm);
+		}
+	}
+	gru_dbg(grudev, "gms %p, refcnt %d\n", gms,
+		atomic_read(&gms->ms_refcnt));
+	return gms;
+}
+
+void gru_drop_mmu_notifier(struct gru_mm_struct *gms)
+{
+	gru_dbg(grudev, "gms %p, refcnt %d, released %d\n", gms,
+		atomic_read(&gms->ms_refcnt), gms->ms_released);
+	if (atomic_dec_return(&gms->ms_refcnt) == 0) {
+		if (!gms->ms_released)
+			mmu_notifier_unregister(&gms->ms_notifier, current->mm);
+		kfree(gms);
+	}
+}
+
+/*
+ * Setup TGH parameters. There are:
+ * 	- 24 TGH handles per GRU chiplet
+ * 	- a portion (MAX_LOCAL_TGH) of the handles are reserved for
+ * 	  use by blade-local cpus
+ * 	- the rest are used by off-blade cpus. This usage is
+ * 	  less frequent than blade-local usage.
+ *
+ * For now, use 16 handles for local flushes, 8 for remote flushes. If the blade
+ * has less tan or equal to 16 cpus, each cpu has a unique handle that it can
+ * use.
+ */
+#define MAX_LOCAL_TGH	16
+
+void gru_tgh_flush_init(struct gru_state *gru)
+{
+	int cpus, shift = 0, n;
+
+	cpus = uv_blade_nr_possible_cpus(gru->gs_blade_id);
+
+	/* n = cpus rounded up to next power of 2 */
+	if (cpus) {
+		n = 1 << fls(cpus - 1);
+
+		/*
+		 * shift count for converting local cpu# to TGH index
+		 *      0 if cpus <= MAX_LOCAL_TGH,
+		 *      1 if cpus <= 2*MAX_LOCAL_TGH,
+		 *      etc
+		 */
+		shift = max(0, fls(n - 1) - fls(MAX_LOCAL_TGH - 1));
+	}
+	gru->gs_tgh_local_shift = shift;
+
+	/* first starting TGH index to use for remote purges */
+	gru->gs_tgh_first_remote = (cpus + (1 << shift) - 1) >> shift;
+
+}
diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile
index b6e40a7958c..35ce2857807 100644
--- a/drivers/misc/sgi-xp/Makefile
+++ b/drivers/misc/sgi-xp/Makefile
@@ -3,9 +3,17 @@
 #
 
 obj-$(CONFIG_SGI_XP)		+= xp.o
-xp-y				:= xp_main.o xp_nofault.o
+xp-y				:= xp_main.o
+xp-$(CONFIG_IA64_SGI_SN2)	+= xp_sn2.o xp_nofault.o
+xp-$(CONFIG_IA64_GENERIC)	+= xp_sn2.o xp_nofault.o xp_uv.o
+xp-$(CONFIG_IA64_SGI_UV)	+= xp_uv.o
+xp-$(CONFIG_X86_64)		+= xp_uv.o
 
 obj-$(CONFIG_SGI_XP)		+= xpc.o
 xpc-y				:= xpc_main.o xpc_channel.o xpc_partition.o
+xpc-$(CONFIG_IA64_SGI_SN2)	+= xpc_sn2.o
+xpc-$(CONFIG_IA64_GENERIC)	+= xpc_sn2.o xpc_uv.o
+xpc-$(CONFIG_IA64_SGI_UV) 	+= xpc_uv.o
+xpc-$(CONFIG_X86_64)		+= xpc_uv.o
 
 obj-$(CONFIG_SGI_XP)		+= xpnet.o
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
index 03a87a307e3..859a5281c61 100644
--- a/drivers/misc/sgi-xp/xp.h
+++ b/drivers/misc/sgi-xp/xp.h
@@ -13,11 +13,34 @@
 #ifndef _DRIVERS_MISC_SGIXP_XP_H
 #define _DRIVERS_MISC_SGIXP_XP_H
 
-#include <linux/cache.h>
-#include <linux/hardirq.h>
 #include <linux/mutex.h>
-#include <asm/sn/types.h>
-#include <asm/sn/bte.h>
+
+#ifdef CONFIG_IA64
+#include <asm/system.h>
+#include <asm/sn/arch.h>	/* defines is_shub1() and is_shub2() */
+#define is_shub()	ia64_platform_is("sn2")
+#define is_uv()		ia64_platform_is("uv")
+#endif
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define is_uv()		is_uv_system()
+#endif
+
+#ifndef is_shub1
+#define is_shub1()	0
+#endif
+
+#ifndef is_shub2
+#define is_shub2()	0
+#endif
+
+#ifndef is_shub
+#define is_shub()	0
+#endif
+
+#ifndef is_uv
+#define is_uv()		0
+#endif
 
 #ifdef USE_DBUG_ON
 #define DBUG_ON(condition)	BUG_ON(condition)
@@ -26,133 +49,56 @@
 #endif
 
 /*
- * Define the maximum number of logically defined partitions the system
- * can support. It is constrained by the maximum number of hardware
- * partitionable regions. The term 'region' in this context refers to the
- * minimum number of nodes that can comprise an access protection grouping.
- * The access protection is in regards to memory, IPI and IOI.
+ * Define the maximum number of partitions the system can possibly support.
+ * It is based on the maximum number of hardware partitionable regions. The
+ * term 'region' in this context refers to the minimum number of nodes that
+ * can comprise an access protection grouping. The access protection is in
+ * regards to memory, IPI and IOI.
  *
  * The maximum number of hardware partitionable regions is equal to the
  * maximum number of nodes in the entire system divided by the minimum number
  * of nodes that comprise an access protection grouping.
  */
-#define XP_MAX_PARTITIONS	64
-
-/*
- * Define the number of u64s required to represent all the C-brick nasids
- * as a bitmap.  The cross-partition kernel modules deal only with
- * C-brick nasids, thus the need for bitmaps which don't account for
- * odd-numbered (non C-brick) nasids.
- */
-#define XP_MAX_PHYSNODE_ID	(MAX_NUMALINK_NODES / 2)
-#define XP_NASID_MASK_BYTES	((XP_MAX_PHYSNODE_ID + 7) / 8)
-#define XP_NASID_MASK_WORDS	((XP_MAX_PHYSNODE_ID + 63) / 64)
-
-/*
- * Wrapper for bte_copy() that should it return a failure status will retry
- * the bte_copy() once in the hope that the failure was due to a temporary
- * aberration (i.e., the link going down temporarily).
- *
- * 	src - physical address of the source of the transfer.
- *	vdst - virtual address of the destination of the transfer.
- *	len - number of bytes to transfer from source to destination.
- *	mode - see bte_copy() for definition.
- *	notification - see bte_copy() for definition.
- *
- * Note: xp_bte_copy() should never be called while holding a spinlock.
- */
-static inline bte_result_t
-xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification)
-{
-	bte_result_t ret;
-	u64 pdst = ia64_tpa(vdst);
-
-	/*
-	 * Ensure that the physically mapped memory is contiguous.
-	 *
-	 * We do this by ensuring that the memory is from region 7 only.
-	 * If the need should arise to use memory from one of the other
-	 * regions, then modify the BUG_ON() statement to ensure that the
-	 * memory from that region is always physically contiguous.
-	 */
-	BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL);
-
-	ret = bte_copy(src, pdst, len, mode, notification);
-	if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) {
-		if (!in_interrupt())
-			cond_resched();
-
-		ret = bte_copy(src, pdst, len, mode, notification);
-	}
-
-	return ret;
-}
+#define XP_MAX_NPARTITIONS_SN2	64
+#define XP_MAX_NPARTITIONS_UV	256
 
 /*
  * XPC establishes channel connections between the local partition and any
  * other partition that is currently up. Over these channels, kernel-level
  * `users' can communicate with their counterparts on the other partitions.
  *
- * The maxinum number of channels is limited to eight. For performance reasons,
- * the internal cross partition structures require sixteen bytes per channel,
- * and eight allows all of this interface-shared info to fit in one cache line.
- *
- * XPC_NCHANNELS reflects the total number of channels currently defined.
  * If the need for additional channels arises, one can simply increase
- * XPC_NCHANNELS accordingly. If the day should come where that number
- * exceeds the MAXIMUM number of channels allowed (eight), then one will need
- * to make changes to the XPC code to allow for this.
+ * XPC_MAX_NCHANNELS accordingly. If the day should come where that number
+ * exceeds the absolute MAXIMUM number of channels possible (eight), then one
+ * will need to make changes to the XPC code to accommodate for this.
+ *
+ * The absolute maximum number of channels possible is limited to eight for
+ * performance reasons on sn2 hardware. The internal cross partition structures
+ * require sixteen bytes per channel, and eight allows all of this
+ * interface-shared info to fit in one 128-byte cacheline.
  */
 #define XPC_MEM_CHANNEL		0	/* memory channel number */
 #define	XPC_NET_CHANNEL		1	/* network channel number */
 
-#define	XPC_NCHANNELS		2	/* #of defined channels */
-#define XPC_MAX_NCHANNELS	8	/* max #of channels allowed */
+#define XPC_MAX_NCHANNELS	2	/* max #of channels allowed */
 
-#if XPC_NCHANNELS > XPC_MAX_NCHANNELS
-#error	XPC_NCHANNELS exceeds MAXIMUM allowed.
+#if XPC_MAX_NCHANNELS > 8
+#error	XPC_MAX_NCHANNELS exceeds absolute MAXIMUM possible.
 #endif
 
 /*
- * The format of an XPC message is as follows:
- *
- *      +-------+--------------------------------+
- *      | flags |////////////////////////////////|
- *      +-------+--------------------------------+
- *      |             message #                  |
- *      +----------------------------------------+
- *      |     payload (user-defined message)     |
- *      |                                        |
- *         		:
- *      |                                        |
- *      +----------------------------------------+
- *
- * The size of the payload is defined by the user via xpc_connect(). A user-
- * defined message resides in the payload area.
- *
- * The user should have no dealings with the message header, but only the
- * message's payload. When a message entry is allocated (via xpc_allocate())
- * a pointer to the payload area is returned and not the actual beginning of
- * the XPC message. The user then constructs a message in the payload area
- * and passes that pointer as an argument on xpc_send() or xpc_send_notify().
- *
- * The size of a message entry (within a message queue) must be a cacheline
- * sized multiple in order to facilitate the BTE transfer of messages from one
- * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user
+ * Define macro, XPC_MSG_SIZE(), is provided for the user
  * that wants to fit as many msg entries as possible in a given memory size
  * (e.g. a memory page).
  */
-struct xpc_msg {
-	u8 flags;		/* FOR XPC INTERNAL USE ONLY */
-	u8 reserved[7];		/* FOR XPC INTERNAL USE ONLY */
-	s64 number;		/* FOR XPC INTERNAL USE ONLY */
-
-	u64 payload;		/* user defined portion of message */
-};
+#define XPC_MSG_MAX_SIZE	128
+#define XPC_MSG_HDR_MAX_SIZE	16
+#define XPC_MSG_PAYLOAD_MAX_SIZE (XPC_MSG_MAX_SIZE - XPC_MSG_HDR_MAX_SIZE)
 
-#define XPC_MSG_PAYLOAD_OFFSET	(u64) (&((struct xpc_msg *)0)->payload)
 #define XPC_MSG_SIZE(_payload_size) \
-		L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size))
+				ALIGN(XPC_MSG_HDR_MAX_SIZE + (_payload_size), \
+				      is_uv() ? 64 : 128)
+
 
 /*
  * Define the return values and values passed to user's callout functions.
@@ -233,8 +179,20 @@ enum xp_retval {
 	xpDisconnected,		/* 51: channel disconnected (closed) */
 
 	xpBteCopyError,		/* 52: bte_copy() returned error */
+	xpSalError,		/* 53: sn SAL error */
+	xpRsvdPageNotSet,	/* 54: the reserved page is not set up */
+	xpPayloadTooBig,	/* 55: payload too large for message slot */
+
+	xpUnsupported,		/* 56: unsupported functionality or resource */
+	xpNeedMoreInfo,		/* 57: more info is needed by SAL */
 
-	xpUnknownReason		/* 53: unknown reason - must be last in enum */
+	xpGruCopyError,		/* 58: gru_copy_gru() returned error */
+	xpGruSendMqError,	/* 59: gru send message queue related error */
+
+	xpBadChannelNumber,	/* 60: invalid channel number */
+	xpBadMsgType,		/* 60: invalid message type */
+
+	xpUnknownReason		/* 61: unknown reason - must be last in enum */
 };
 
 /*
@@ -285,6 +243,9 @@ typedef void (*xpc_channel_func) (enum xp_retval reason, short partid,
  * calling xpc_received().
  *
  * All other reason codes indicate failure.
+ *
+ * NOTE: The user defined function must be callable by an interrupt handler
+ *       and thus cannot block.
  */
 typedef void (*xpc_notify_func) (enum xp_retval reason, short partid,
 				 int ch_number, void *key);
@@ -308,23 +269,22 @@ struct xpc_registration {
 	xpc_channel_func func;	/* function to call */
 	void *key;		/* pointer to user's key */
 	u16 nentries;		/* #of msg entries in local msg queue */
-	u16 msg_size;		/* message queue's message size */
+	u16 entry_size;		/* message queue's message entry size */
 	u32 assigned_limit;	/* limit on #of assigned kthreads */
 	u32 idle_limit;		/* limit on #of idle kthreads */
 } ____cacheline_aligned;
 
 #define XPC_CHANNEL_REGISTERED(_c)	(xpc_registrations[_c].func != NULL)
 
-/* the following are valid xpc_allocate() flags */
+/* the following are valid xpc_send() or xpc_send_notify() flags */
 #define XPC_WAIT	0	/* wait flag */
 #define XPC_NOWAIT	1	/* no wait flag */
 
 struct xpc_interface {
 	void (*connect) (int);
 	void (*disconnect) (int);
-	enum xp_retval (*allocate) (short, int, u32, void **);
-	enum xp_retval (*send) (short, int, void *);
-	enum xp_retval (*send_notify) (short, int, void *,
+	enum xp_retval (*send) (short, int, u32, void *, u16);
+	enum xp_retval (*send_notify) (short, int, u32, void *, u16,
 					xpc_notify_func, void *);
 	void (*received) (short, int, void *);
 	enum xp_retval (*partid_to_nasids) (short, void *);
@@ -334,10 +294,9 @@ extern struct xpc_interface xpc_interface;
 
 extern void xpc_set_interface(void (*)(int),
 			      void (*)(int),
-			      enum xp_retval (*)(short, int, u32, void **),
-			      enum xp_retval (*)(short, int, void *),
-			      enum xp_retval (*)(short, int, void *,
-						  xpc_notify_func, void *),
+			      enum xp_retval (*)(short, int, u32, void *, u16),
+			      enum xp_retval (*)(short, int, u32, void *, u16,
+						 xpc_notify_func, void *),
 			      void (*)(short, int, void *),
 			      enum xp_retval (*)(short, void *));
 extern void xpc_clear_interface(void);
@@ -347,22 +306,19 @@ extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16,
 extern void xpc_disconnect(int);
 
 static inline enum xp_retval
-xpc_allocate(short partid, int ch_number, u32 flags, void **payload)
-{
-	return xpc_interface.allocate(partid, ch_number, flags, payload);
-}
-
-static inline enum xp_retval
-xpc_send(short partid, int ch_number, void *payload)
+xpc_send(short partid, int ch_number, u32 flags, void *payload,
+	 u16 payload_size)
 {
-	return xpc_interface.send(partid, ch_number, payload);
+	return xpc_interface.send(partid, ch_number, flags, payload,
+				  payload_size);
 }
 
 static inline enum xp_retval
-xpc_send_notify(short partid, int ch_number, void *payload,
-		xpc_notify_func func, void *key)
+xpc_send_notify(short partid, int ch_number, u32 flags, void *payload,
+		u16 payload_size, xpc_notify_func func, void *key)
 {
-	return xpc_interface.send_notify(partid, ch_number, payload, func, key);
+	return xpc_interface.send_notify(partid, ch_number, flags, payload,
+					 payload_size, func, key);
 }
 
 static inline void
@@ -377,8 +333,23 @@ xpc_partid_to_nasids(short partid, void *nasids)
 	return xpc_interface.partid_to_nasids(partid, nasids);
 }
 
+extern short xp_max_npartitions;
+extern short xp_partition_id;
+extern u8 xp_region_size;
+
+extern unsigned long (*xp_pa) (void *);
+extern enum xp_retval (*xp_remote_memcpy) (unsigned long, const unsigned long,
+		       size_t);
+extern int (*xp_cpu_to_nasid) (int);
+
 extern u64 xp_nofault_PIOR_target;
 extern int xp_nofault_PIOR(void *);
 extern int xp_error_PIOR(void);
 
+extern struct device *xp;
+extern enum xp_retval xp_init_sn2(void);
+extern enum xp_retval xp_init_uv(void);
+extern void xp_exit_sn2(void);
+extern void xp_exit_uv(void);
+
 #endif /* _DRIVERS_MISC_SGIXP_XP_H */
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 196480b691a..66a1d19e08a 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -14,29 +14,48 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/mutex.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
+#include <linux/device.h>
 #include "xp.h"
 
-/*
- * The export of xp_nofault_PIOR needs to happen here since it is defined
- * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
- * defined here.
- */
-EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
+/* define the XP debug device structures to be used with dev_dbg() et al */
+
+struct device_driver xp_dbg_name = {
+	.name = "xp"
+};
+
+struct device xp_dbg_subname = {
+	.bus_id = {0},		/* set to "" */
+	.driver = &xp_dbg_name
+};
+
+struct device *xp = &xp_dbg_subname;
+
+/* max #of partitions possible */
+short xp_max_npartitions;
+EXPORT_SYMBOL_GPL(xp_max_npartitions);
+
+short xp_partition_id;
+EXPORT_SYMBOL_GPL(xp_partition_id);
+
+u8 xp_region_size;
+EXPORT_SYMBOL_GPL(xp_region_size);
+
+unsigned long (*xp_pa) (void *addr);
+EXPORT_SYMBOL_GPL(xp_pa);
+
+enum xp_retval (*xp_remote_memcpy) (unsigned long dst_gpa,
+				    const unsigned long src_gpa, size_t len);
+EXPORT_SYMBOL_GPL(xp_remote_memcpy);
 
-u64 xp_nofault_PIOR_target;
-EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
+int (*xp_cpu_to_nasid) (int cpuid);
+EXPORT_SYMBOL_GPL(xp_cpu_to_nasid);
 
 /*
  * xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level
  * users of XPC.
  */
-struct xpc_registration xpc_registrations[XPC_NCHANNELS];
+struct xpc_registration xpc_registrations[XPC_MAX_NCHANNELS];
 EXPORT_SYMBOL_GPL(xpc_registrations);
 
 /*
@@ -51,10 +70,9 @@ xpc_notloaded(void)
 struct xpc_interface xpc_interface = {
 	(void (*)(int))xpc_notloaded,
 	(void (*)(int))xpc_notloaded,
-	(enum xp_retval(*)(short, int, u32, void **))xpc_notloaded,
-	(enum xp_retval(*)(short, int, void *))xpc_notloaded,
-	(enum xp_retval(*)(short, int, void *, xpc_notify_func, void *))
-	    xpc_notloaded,
+	(enum xp_retval(*)(short, int, u32, void *, u16))xpc_notloaded,
+	(enum xp_retval(*)(short, int, u32, void *, u16, xpc_notify_func,
+			   void *))xpc_notloaded,
 	(void (*)(short, int, void *))xpc_notloaded,
 	(enum xp_retval(*)(short, void *))xpc_notloaded
 };
@@ -66,16 +84,14 @@ EXPORT_SYMBOL_GPL(xpc_interface);
 void
 xpc_set_interface(void (*connect) (int),
 		  void (*disconnect) (int),
-		  enum xp_retval (*allocate) (short, int, u32, void **),
-		  enum xp_retval (*send) (short, int, void *),
-		  enum xp_retval (*send_notify) (short, int, void *,
+		  enum xp_retval (*send) (short, int, u32, void *, u16),
+		  enum xp_retval (*send_notify) (short, int, u32, void *, u16,
 						  xpc_notify_func, void *),
 		  void (*received) (short, int, void *),
 		  enum xp_retval (*partid_to_nasids) (short, void *))
 {
 	xpc_interface.connect = connect;
 	xpc_interface.disconnect = disconnect;
-	xpc_interface.allocate = allocate;
 	xpc_interface.send = send;
 	xpc_interface.send_notify = send_notify;
 	xpc_interface.received = received;
@@ -91,13 +107,11 @@ xpc_clear_interface(void)
 {
 	xpc_interface.connect = (void (*)(int))xpc_notloaded;
 	xpc_interface.disconnect = (void (*)(int))xpc_notloaded;
-	xpc_interface.allocate = (enum xp_retval(*)(short, int, u32,
-						     void **))xpc_notloaded;
-	xpc_interface.send = (enum xp_retval(*)(short, int, void *))
+	xpc_interface.send = (enum xp_retval(*)(short, int, u32, void *, u16))
 	    xpc_notloaded;
-	xpc_interface.send_notify = (enum xp_retval(*)(short, int, void *,
-							xpc_notify_func,
-							void *))xpc_notloaded;
+	xpc_interface.send_notify = (enum xp_retval(*)(short, int, u32, void *,
+						       u16, xpc_notify_func,
+						       void *))xpc_notloaded;
 	xpc_interface.received = (void (*)(short, int, void *))
 	    xpc_notloaded;
 	xpc_interface.partid_to_nasids = (enum xp_retval(*)(short, void *))
@@ -135,11 +149,14 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
 {
 	struct xpc_registration *registration;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 	DBUG_ON(payload_size == 0 || nentries == 0);
 	DBUG_ON(func == NULL);
 	DBUG_ON(assigned_limit == 0 || idle_limit > assigned_limit);
 
+	if (XPC_MSG_SIZE(payload_size) > XPC_MSG_MAX_SIZE)
+		return xpPayloadTooBig;
+
 	registration = &xpc_registrations[ch_number];
 
 	if (mutex_lock_interruptible(&registration->mutex) != 0)
@@ -152,7 +169,7 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
 	}
 
 	/* register the channel for connection */
-	registration->msg_size = XPC_MSG_SIZE(payload_size);
+	registration->entry_size = XPC_MSG_SIZE(payload_size);
 	registration->nentries = nentries;
 	registration->assigned_limit = assigned_limit;
 	registration->idle_limit = idle_limit;
@@ -185,7 +202,7 @@ xpc_disconnect(int ch_number)
 {
 	struct xpc_registration *registration;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
 	registration = &xpc_registrations[ch_number];
 
@@ -206,7 +223,7 @@ xpc_disconnect(int ch_number)
 	registration->func = NULL;
 	registration->key = NULL;
 	registration->nentries = 0;
-	registration->msg_size = 0;
+	registration->entry_size = 0;
 	registration->assigned_limit = 0;
 	registration->idle_limit = 0;
 
@@ -221,39 +238,21 @@ EXPORT_SYMBOL_GPL(xpc_disconnect);
 int __init
 xp_init(void)
 {
-	int ret, ch_number;
-	u64 func_addr = *(u64 *)xp_nofault_PIOR;
-	u64 err_func_addr = *(u64 *)xp_error_PIOR;
-
-	if (!ia64_platform_is("sn2"))
-		return -ENODEV;
+	enum xp_retval ret;
+	int ch_number;
 
-	/*
-	 * Register a nofault code region which performs a cross-partition
-	 * PIO read. If the PIO read times out, the MCA handler will consume
-	 * the error and return to a kernel-provided instruction to indicate
-	 * an error. This PIO read exists because it is guaranteed to timeout
-	 * if the destination is down (AMO operations do not timeout on at
-	 * least some CPUs on Shubs <= v1.2, which unfortunately we have to
-	 * work around).
-	 */
-	ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
-				       1, 1);
-	if (ret != 0) {
-		printk(KERN_ERR "XP: can't register nofault code, error=%d\n",
-		       ret);
-	}
-	/*
-	 * Setup the nofault PIO read target. (There is no special reason why
-	 * SH_IPI_ACCESS was selected.)
-	 */
-	if (is_shub2())
-		xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
+	if (is_shub())
+		ret = xp_init_sn2();
+	else if (is_uv())
+		ret = xp_init_uv();
 	else
-		xp_nofault_PIOR_target = SH1_IPI_ACCESS;
+		ret = xpUnsupported;
+
+	if (ret != xpSuccess)
+		return -ENODEV;
 
 	/* initialize the connection registration mutex */
-	for (ch_number = 0; ch_number < XPC_NCHANNELS; ch_number++)
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
 		mutex_init(&xpc_registrations[ch_number].mutex);
 
 	return 0;
@@ -264,12 +263,10 @@ module_init(xp_init);
 void __exit
 xp_exit(void)
 {
-	u64 func_addr = *(u64 *)xp_nofault_PIOR;
-	u64 err_func_addr = *(u64 *)xp_error_PIOR;
-
-	/* unregister the PIO read nofault code region */
-	(void)sn_register_nofault_code(func_addr, err_func_addr,
-				       err_func_addr, 1, 0);
+	if (is_shub())
+		xp_exit_sn2();
+	else if (is_uv())
+		xp_exit_uv();
 }
 
 module_exit(xp_exit);
diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c
new file mode 100644
index 00000000000..1440134caf3
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp_sn2.c
@@ -0,0 +1,146 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition (XP) sn2-based functions.
+ *
+ *      Architecture specific implementation of common functions.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <asm/sn/bte.h>
+#include <asm/sn/sn_sal.h>
+#include "xp.h"
+
+/*
+ * The export of xp_nofault_PIOR needs to happen here since it is defined
+ * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
+ * defined here.
+ */
+EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
+
+u64 xp_nofault_PIOR_target;
+EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
+
+/*
+ * Register a nofault code region which performs a cross-partition PIO read.
+ * If the PIO read times out, the MCA handler will consume the error and
+ * return to a kernel-provided instruction to indicate an error. This PIO read
+ * exists because it is guaranteed to timeout if the destination is down
+ * (amo operations do not timeout on at least some CPUs on Shubs <= v1.2,
+ * which unfortunately we have to work around).
+ */
+static enum xp_retval
+xp_register_nofault_code_sn2(void)
+{
+	int ret;
+	u64 func_addr;
+	u64 err_func_addr;
+
+	func_addr = *(u64 *)xp_nofault_PIOR;
+	err_func_addr = *(u64 *)xp_error_PIOR;
+	ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
+				       1, 1);
+	if (ret != 0) {
+		dev_err(xp, "can't register nofault code, error=%d\n", ret);
+		return xpSalError;
+	}
+	/*
+	 * Setup the nofault PIO read target. (There is no special reason why
+	 * SH_IPI_ACCESS was selected.)
+	 */
+	if (is_shub1())
+		xp_nofault_PIOR_target = SH1_IPI_ACCESS;
+	else if (is_shub2())
+		xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
+
+	return xpSuccess;
+}
+
+static void
+xp_unregister_nofault_code_sn2(void)
+{
+	u64 func_addr = *(u64 *)xp_nofault_PIOR;
+	u64 err_func_addr = *(u64 *)xp_error_PIOR;
+
+	/* unregister the PIO read nofault code region */
+	(void)sn_register_nofault_code(func_addr, err_func_addr,
+				       err_func_addr, 1, 0);
+}
+
+/*
+ * Convert a virtual memory address to a physical memory address.
+ */
+static unsigned long
+xp_pa_sn2(void *addr)
+{
+	return __pa(addr);
+}
+
+/*
+ * Wrapper for bte_copy().
+ *
+ *	dst_pa - physical address of the destination of the transfer.
+ *	src_pa - physical address of the source of the transfer.
+ *	len - number of bytes to transfer from source to destination.
+ *
+ * Note: xp_remote_memcpy_sn2() should never be called while holding a spinlock.
+ */
+static enum xp_retval
+xp_remote_memcpy_sn2(unsigned long dst_pa, const unsigned long src_pa,
+		     size_t len)
+{
+	bte_result_t ret;
+
+	ret = bte_copy(src_pa, dst_pa, len, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+	if (ret == BTE_SUCCESS)
+		return xpSuccess;
+
+	if (is_shub2()) {
+		dev_err(xp, "bte_copy() on shub2 failed, error=0x%x dst_pa="
+			"0x%016lx src_pa=0x%016lx len=%ld\\n", ret, dst_pa,
+			src_pa, len);
+	} else {
+		dev_err(xp, "bte_copy() failed, error=%d dst_pa=0x%016lx "
+			"src_pa=0x%016lx len=%ld\\n", ret, dst_pa, src_pa, len);
+	}
+
+	return xpBteCopyError;
+}
+
+static int
+xp_cpu_to_nasid_sn2(int cpuid)
+{
+	return cpuid_to_nasid(cpuid);
+}
+
+enum xp_retval
+xp_init_sn2(void)
+{
+	BUG_ON(!is_shub());
+
+	xp_max_npartitions = XP_MAX_NPARTITIONS_SN2;
+	xp_partition_id = sn_partition_id;
+	xp_region_size = sn_region_size;
+
+	xp_pa = xp_pa_sn2;
+	xp_remote_memcpy = xp_remote_memcpy_sn2;
+	xp_cpu_to_nasid = xp_cpu_to_nasid_sn2;
+
+	return xp_register_nofault_code_sn2();
+}
+
+void
+xp_exit_sn2(void)
+{
+	BUG_ON(!is_shub());
+
+	xp_unregister_nofault_code_sn2();
+}
+
diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c
new file mode 100644
index 00000000000..d9f7ce2510b
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp_uv.c
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition (XP) uv-based functions.
+ *
+ *      Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/device.h>
+#include <asm/uv/uv_hub.h>
+#include "../sgi-gru/grukservices.h"
+#include "xp.h"
+
+/*
+ * Convert a virtual memory address to a physical memory address.
+ */
+static unsigned long
+xp_pa_uv(void *addr)
+{
+	return uv_gpa(addr);
+}
+
+static enum xp_retval
+xp_remote_memcpy_uv(unsigned long dst_gpa, const unsigned long src_gpa,
+		    size_t len)
+{
+	int ret;
+
+	ret = gru_copy_gpa(dst_gpa, src_gpa, len);
+	if (ret == 0)
+		return xpSuccess;
+
+	dev_err(xp, "gru_copy_gpa() failed, dst_gpa=0x%016lx src_gpa=0x%016lx "
+		"len=%ld\n", dst_gpa, src_gpa, len);
+	return xpGruCopyError;
+}
+
+static int
+xp_cpu_to_nasid_uv(int cpuid)
+{
+	/* ??? Is this same as sn2 nasid in mach/part bitmaps set up by SAL? */
+	return UV_PNODE_TO_NASID(uv_cpu_to_pnode(cpuid));
+}
+
+enum xp_retval
+xp_init_uv(void)
+{
+	BUG_ON(!is_uv());
+
+	xp_max_npartitions = XP_MAX_NPARTITIONS_UV;
+	xp_partition_id = 0;	/* !!! not correct value */
+	xp_region_size = 0;	/* !!! not correct value */
+
+	xp_pa = xp_pa_uv;
+	xp_remote_memcpy = xp_remote_memcpy_uv;
+	xp_cpu_to_nasid = xp_cpu_to_nasid_uv;
+
+	return xpSuccess;
+}
+
+void
+xp_exit_uv(void)
+{
+	BUG_ON(!is_uv());
+}
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index 11ac267ed68..619208d6186 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -13,18 +13,10 @@
 #ifndef _DRIVERS_MISC_SGIXP_XPC_H
 #define _DRIVERS_MISC_SGIXP_XPC_H
 
-#include <linux/interrupt.h>
-#include <linux/sysctl.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
+#include <linux/wait.h>
 #include <linux/completion.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/clksupport.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/mspec.h>
-#include <asm/sn/shub_mmr.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
 #include "xp.h"
 
 /*
@@ -36,23 +28,7 @@
 #define XPC_VERSION_MAJOR(_v)		((_v) >> 4)
 #define XPC_VERSION_MINOR(_v)		((_v) & 0xf)
 
-/*
- * The next macros define word or bit representations for given
- * C-brick nasid in either the SAL provided bit array representing
- * nasids in the partition/machine or the AMO_t array used for
- * inter-partition initiation communications.
- *
- * For SN2 machines, C-Bricks are alway even numbered NASIDs.  As
- * such, some space will be saved by insisting that nasid information
- * passed from SAL always be packed for C-Bricks and the
- * cross-partition interrupts use the same packing scheme.
- */
-#define XPC_NASID_W_INDEX(_n)	(((_n) / 64) / 2)
-#define XPC_NASID_B_INDEX(_n)	(((_n) / 2) & (64 - 1))
-#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \
-				    (1UL << XPC_NASID_B_INDEX(_n)))
-#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
-
+/* define frequency of the heartbeat and frequency how often it's checked */
 #define XPC_HB_DEFAULT_INTERVAL		5	/* incr HB every x secs */
 #define XPC_HB_CHECK_DEFAULT_INTERVAL	20	/* check HB every x secs */
 
@@ -72,11 +48,11 @@
  *
  *   reserved page header
  *
- *     The first cacheline of the reserved page contains the header
- *     (struct xpc_rsvd_page). Before SAL initialization has completed,
+ *     The first two 64-byte cachelines of the reserved page contain the
+ *     header (struct xpc_rsvd_page). Before SAL initialization has completed,
  *     SAL has set up the following fields of the reserved page header:
- *     SAL_signature, SAL_version, partid, and nasids_size. The other
- *     fields are set up by XPC. (xpc_rsvd_page points to the local
+ *     SAL_signature, SAL_version, SAL_partid, and SAL_nasids_size. The
+ *     other fields are set up by XPC. (xpc_rsvd_page points to the local
  *     partition's reserved page.)
  *
  *   part_nasids mask
@@ -87,14 +63,16 @@
  *     the actual nasids in the entire machine (mach_nasids). We're only
  *     interested in the even numbered nasids (which contain the processors
  *     and/or memory), so we only need half as many bits to represent the
- *     nasids. The part_nasids mask is located starting at the first cacheline
- *     following the reserved page header. The mach_nasids mask follows right
- *     after the part_nasids mask. The size in bytes of each mask is reflected
- *     by the reserved page header field 'nasids_size'. (Local partition's
- *     mask pointers are xpc_part_nasids and xpc_mach_nasids.)
+ *     nasids. When mapping nasid to bit in a mask (or bit to nasid) be sure
+ *     to either divide or multiply by 2. The part_nasids mask is located
+ *     starting at the first cacheline following the reserved page header. The
+ *     mach_nasids mask follows right after the part_nasids mask. The size in
+ *     bytes of each mask is reflected by the reserved page header field
+ *     'SAL_nasids_size'. (Local partition's mask pointers are xpc_part_nasids
+ *     and xpc_mach_nasids.)
  *
- *   vars
- *   vars part
+ *   vars	(ia64-sn2 only)
+ *   vars part	(ia64-sn2 only)
  *
  *     Immediately following the mach_nasids mask are the XPC variables
  *     required by other partitions. First are those that are generic to all
@@ -102,43 +80,26 @@
  *     which are partition specific (vars part). These are setup by XPC.
  *     (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
  *
- * Note: Until vars_pa is set, the partition XPC code has not been initialized.
+ * Note: Until 'ts_jiffies' is set non-zero, the partition XPC code has not been
+ *       initialized.
  */
 struct xpc_rsvd_page {
 	u64 SAL_signature;	/* SAL: unique signature */
 	u64 SAL_version;	/* SAL: version */
-	u8 partid;		/* SAL: partition ID */
+	short SAL_partid;	/* SAL: partition ID */
+	short max_npartitions;	/* value of XPC_MAX_PARTITIONS */
 	u8 version;
-	u8 pad1[6];		/* align to next u64 in cacheline */
-	u64 vars_pa;		/* physical address of struct xpc_vars */
-	struct timespec stamp;	/* time when reserved page was setup by XPC */
-	u64 pad2[9];		/* align to last u64 in cacheline */
-	u64 nasids_size;	/* SAL: size of each nasid mask in bytes */
+	u8 pad1[3];		/* align to next u64 in 1st 64-byte cacheline */
+	union {
+		unsigned long vars_pa;	/* phys address of struct xpc_vars */
+		unsigned long activate_mq_gpa; /* gru phy addr of activate_mq */
+	} sn;
+	unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
+	u64 pad2[10];		/* align to last u64 in 2nd 64-byte cacheline */
+	u64 SAL_nasids_size;	/* SAL: size of each nasid mask in bytes */
 };
 
-#define XPC_RP_VERSION _XPC_VERSION(1, 1) /* version 1.1 of the reserved page */
-
-#define XPC_SUPPORTS_RP_STAMP(_version) \
-			(_version >= _XPC_VERSION(1, 1))
-
-/*
- * compare stamps - the return value is:
- *
- *	< 0,	if stamp1 < stamp2
- *	= 0,	if stamp1 == stamp2
- *	> 0,	if stamp1 > stamp2
- */
-static inline int
-xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
-{
-	int ret;
-
-	ret = stamp1->tv_sec - stamp2->tv_sec;
-	if (ret == 0)
-		ret = stamp1->tv_nsec - stamp2->tv_nsec;
-
-	return ret;
-}
+#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */
 
 /*
  * Define the structures by which XPC variables can be exported to other
@@ -154,85 +115,40 @@ xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
  * reflected by incrementing either the major or minor version numbers
  * of struct xpc_vars.
  */
-struct xpc_vars {
+struct xpc_vars_sn2 {
 	u8 version;
 	u64 heartbeat;
-	u64 heartbeating_to_mask;
+	DECLARE_BITMAP(heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
 	u64 heartbeat_offline;	/* if 0, heartbeat should be changing */
-	int act_nasid;
-	int act_phys_cpuid;
-	u64 vars_part_pa;
-	u64 amos_page_pa;	/* paddr of page of AMOs from MSPEC driver */
-	AMO_t *amos_page;	/* vaddr of page of AMOs from MSPEC driver */
+	int activate_IRQ_nasid;
+	int activate_IRQ_phys_cpuid;
+	unsigned long vars_part_pa;
+	unsigned long amos_page_pa;/* paddr of page of amos from MSPEC driver */
+	struct amo *amos_page;	/* vaddr of page of amos from MSPEC driver */
 };
 
 #define XPC_V_VERSION _XPC_VERSION(3, 1)    /* version 3.1 of the cross vars */
 
-#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
-			(_version >= _XPC_VERSION(3, 1))
-
-static inline int
-xpc_hb_allowed(short partid, struct xpc_vars *vars)
-{
-	return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
-}
-
-static inline void
-xpc_allow_hb(short partid, struct xpc_vars *vars)
-{
-	u64 old_mask, new_mask;
-
-	do {
-		old_mask = vars->heartbeating_to_mask;
-		new_mask = (old_mask | (1UL << partid));
-	} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
-		 old_mask);
-}
-
-static inline void
-xpc_disallow_hb(short partid, struct xpc_vars *vars)
-{
-	u64 old_mask, new_mask;
-
-	do {
-		old_mask = vars->heartbeating_to_mask;
-		new_mask = (old_mask & ~(1UL << partid));
-	} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
-		 old_mask);
-}
-
-/*
- * The AMOs page consists of a number of AMO variables which are divided into
- * four groups, The first two groups are used to identify an IRQ's sender.
- * These two groups consist of 64 and 128 AMO variables respectively. The last
- * two groups, consisting of just one AMO variable each, are used to identify
- * the remote partitions that are currently engaged (from the viewpoint of
- * the XPC running on the remote partition).
- */
-#define XPC_NOTIFY_IRQ_AMOS	   0
-#define XPC_ACTIVATE_IRQ_AMOS	   (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
-#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
-#define XPC_DISENGAGE_REQUEST_AMO  (XPC_ENGAGED_PARTITIONS_AMO + 1)
-
 /*
  * The following structure describes the per partition specific variables.
  *
  * An array of these structures, one per partition, will be defined. As a
  * partition becomes active XPC will copy the array entry corresponding to
- * itself from that partition. It is desirable that the size of this
- * structure evenly divide into a cacheline, such that none of the entries
- * in this array crosses a cacheline boundary. As it is now, each entry
- * occupies half a cacheline.
+ * itself from that partition. It is desirable that the size of this structure
+ * evenly divides into a 128-byte cacheline, such that none of the entries in
+ * this array crosses a 128-byte cacheline boundary. As it is now, each entry
+ * occupies 64-bytes.
  */
-struct xpc_vars_part {
+struct xpc_vars_part_sn2 {
 	u64 magic;
 
-	u64 openclose_args_pa;	/* physical address of open and close args */
-	u64 GPs_pa;		/* physical address of Get/Put values */
+	unsigned long openclose_args_pa; /* phys addr of open and close args */
+	unsigned long GPs_pa;	/* physical address of Get/Put values */
+
+	unsigned long chctl_amo_pa; /* physical address of chctl flags' amo */
 
-	u64 IPI_amo_pa;		/* physical address of IPI AMO_t structure */
-	int IPI_nasid;		/* nasid of where to send IPIs */
-	int IPI_phys_cpuid;	/* physical CPU ID of where to send IPIs */
+	int notify_IRQ_nasid;	/* nasid of where to send notify IRQs */
+	int notify_IRQ_phys_cpuid;	/* CPUID of where to send notify IRQs */
 
 	u8 nchannels;		/* #of defined channels supported */
 
@@ -248,20 +164,95 @@ struct xpc_vars_part {
  * MAGIC2 indicates that this partition has pulled the remote partititions
  * per partition variables that pertain to this partition.
  */
-#define XPC_VP_MAGIC1	0x0053524156435058L   /* 'XPCVARS\0'L (little endian) */
-#define XPC_VP_MAGIC2	0x0073726176435058L   /* 'XPCvars\0'L (little endian) */
+#define XPC_VP_MAGIC1_SN2 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */
+#define XPC_VP_MAGIC2_SN2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
 
 /* the reserved page sizes and offsets */
 
 #define XPC_RP_HEADER_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
-#define XPC_RP_VARS_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_vars))
+#define XPC_RP_VARS_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_vars_sn2))
 
-#define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE))
-#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
-#define XPC_RP_VARS(_rp)	((struct xpc_vars *)(XPC_RP_MACH_NASIDS(_rp) + \
-				    xp_nasid_mask_words))
-#define XPC_RP_VARS_PART(_rp)	((struct xpc_vars_part *) \
-				    ((u8 *)XPC_RP_VARS(_rp) + XPC_RP_VARS_SIZE))
+#define XPC_RP_PART_NASIDS(_rp) ((unsigned long *)((u8 *)(_rp) + \
+				 XPC_RP_HEADER_SIZE))
+#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + \
+				 xpc_nasid_mask_nlongs)
+#define XPC_RP_VARS(_rp)	((struct xpc_vars_sn2 *) \
+				 (XPC_RP_MACH_NASIDS(_rp) + \
+				  xpc_nasid_mask_nlongs))
+
+/*
+ * The activate_mq is used to send/receive GRU messages that affect XPC's
+ * heartbeat, partition active state, and channel state. This is UV only.
+ */
+struct xpc_activate_mq_msghdr_uv {
+	short partid;		/* sender's partid */
+	u8 act_state;		/* sender's act_state at time msg sent */
+	u8 type;		/* message's type */
+	unsigned long rp_ts_jiffies; /* timestamp of sender's rp setup by XPC */
+};
+
+/* activate_mq defined message types */
+#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV		0
+#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV		1
+#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV	2
+#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV		3
+
+#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV		4
+#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV		5
+
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV	6
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV		7
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV	8
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV		9
+
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV		10
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV		11
+
+struct xpc_activate_mq_msg_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+};
+
+struct xpc_activate_mq_msg_heartbeat_req_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	u64 heartbeat;
+};
+
+struct xpc_activate_mq_msg_activate_req_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	unsigned long rp_gpa;
+	unsigned long activate_mq_gpa;
+};
+
+struct xpc_activate_mq_msg_deactivate_req_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	enum xp_retval reason;
+};
+
+struct xpc_activate_mq_msg_chctl_closerequest_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+	enum xp_retval reason;
+};
+
+struct xpc_activate_mq_msg_chctl_closereply_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+};
+
+struct xpc_activate_mq_msg_chctl_openrequest_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+	short entry_size;	/* size of notify_mq's GRU messages */
+	short local_nentries;	/* ??? Is this needed? What is? */
+};
+
+struct xpc_activate_mq_msg_chctl_openreply_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+	short remote_nentries;	/* ??? Is this needed? What is? */
+	short local_nentries;	/* ??? Is this needed? What is? */
+	unsigned long local_notify_mq_gpa;
+};
 
 /*
  * Functions registered by add_timer() or called by kernel_thread() only
@@ -270,22 +261,22 @@ struct xpc_vars_part {
  * the passed argument.
  */
 #define XPC_PACK_ARGS(_arg1, _arg2) \
-			((((u64) _arg1) & 0xffffffff) | \
-			((((u64) _arg2) & 0xffffffff) << 32))
+			((((u64)_arg1) & 0xffffffff) | \
+			((((u64)_arg2) & 0xffffffff) << 32))
 
-#define XPC_UNPACK_ARG1(_args)	(((u64) _args) & 0xffffffff)
-#define XPC_UNPACK_ARG2(_args)	((((u64) _args) >> 32) & 0xffffffff)
+#define XPC_UNPACK_ARG1(_args)	(((u64)_args) & 0xffffffff)
+#define XPC_UNPACK_ARG2(_args)	((((u64)_args) >> 32) & 0xffffffff)
 
 /*
  * Define a Get/Put value pair (pointers) used with a message queue.
  */
-struct xpc_gp {
+struct xpc_gp_sn2 {
 	s64 get;		/* Get value */
 	s64 put;		/* Put value */
 };
 
 #define XPC_GP_SIZE \
-		L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS)
+		L1_CACHE_ALIGN(sizeof(struct xpc_gp_sn2) * XPC_MAX_NCHANNELS)
 
 /*
  * Define a structure that contains arguments associated with opening and
@@ -293,31 +284,89 @@ struct xpc_gp {
  */
 struct xpc_openclose_args {
 	u16 reason;		/* reason why channel is closing */
-	u16 msg_size;		/* sizeof each message entry */
+	u16 entry_size;		/* sizeof each message entry */
 	u16 remote_nentries;	/* #of message entries in remote msg queue */
 	u16 local_nentries;	/* #of message entries in local msg queue */
-	u64 local_msgqueue_pa;	/* physical address of local message queue */
+	unsigned long local_msgqueue_pa; /* phys addr of local message queue */
 };
 
 #define XPC_OPENCLOSE_ARGS_SIZE \
-	      L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS)
+	      L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * \
+	      XPC_MAX_NCHANNELS)
 
-/* struct xpc_msg flags */
 
-#define	XPC_M_DONE		0x01	/* msg has been received/consumed */
-#define	XPC_M_READY		0x02	/* msg is ready to be sent */
-#define	XPC_M_INTERRUPT		0x04	/* send interrupt when msg consumed */
+/*
+ * Structures to define a fifo singly-linked list.
+ */
 
-#define XPC_MSG_ADDRESS(_payload) \
-		((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET))
+struct xpc_fifo_entry_uv {
+	struct xpc_fifo_entry_uv *next;
+};
+
+struct xpc_fifo_head_uv {
+	struct xpc_fifo_entry_uv *first;
+	struct xpc_fifo_entry_uv *last;
+	spinlock_t lock;
+	int n_entries;
+};
 
 /*
- * Defines notify entry.
+ * Define a sn2 styled message.
+ *
+ * A user-defined message resides in the payload area. The max size of the
+ * payload is defined by the user via xpc_connect().
+ *
+ * The size of a message entry (within a message queue) must be a 128-byte
+ * cacheline sized multiple in order to facilitate the BTE transfer of messages
+ * from one message queue to another.
+ */
+struct xpc_msg_sn2 {
+	u8 flags;		/* FOR XPC INTERNAL USE ONLY */
+	u8 reserved[7];		/* FOR XPC INTERNAL USE ONLY */
+	s64 number;		/* FOR XPC INTERNAL USE ONLY */
+
+	u64 payload;		/* user defined portion of message */
+};
+
+/* struct xpc_msg_sn2 flags */
+
+#define	XPC_M_SN2_DONE		0x01	/* msg has been received/consumed */
+#define	XPC_M_SN2_READY		0x02	/* msg is ready to be sent */
+#define	XPC_M_SN2_INTERRUPT	0x04	/* send interrupt when msg consumed */
+
+/*
+ * The format of a uv XPC notify_mq GRU message is as follows:
+ *
+ * A user-defined message resides in the payload area. The max size of the
+ * payload is defined by the user via xpc_connect().
+ *
+ * The size of a message (payload and header) sent via the GRU must be either 1
+ * or 2 GRU_CACHE_LINE_BYTES in length.
+ */
+
+struct xpc_notify_mq_msghdr_uv {
+	union {
+		unsigned int gru_msg_hdr;	/* FOR GRU INTERNAL USE ONLY */
+		struct xpc_fifo_entry_uv next;	/* FOR XPC INTERNAL USE ONLY */
+	} u;
+	short partid;		/* FOR XPC INTERNAL USE ONLY */
+	u8 ch_number;		/* FOR XPC INTERNAL USE ONLY */
+	u8 size;		/* FOR XPC INTERNAL USE ONLY */
+	unsigned int msg_slot_number;	/* FOR XPC INTERNAL USE ONLY */
+};
+
+struct xpc_notify_mq_msg_uv {
+	struct xpc_notify_mq_msghdr_uv hdr;
+	unsigned long payload;
+};
+
+/*
+ * Define sn2's notify entry.
  *
  * This is used to notify a message's sender that their message was received
  * and consumed by the intended recipient.
  */
-struct xpc_notify {
+struct xpc_notify_sn2 {
 	u8 type;		/* type of notification */
 
 	/* the following two fields are only used if type == XPC_N_CALL */
@@ -325,9 +374,20 @@ struct xpc_notify {
 	void *key;		/* pointer to user's key */
 };
 
-/* struct xpc_notify type of notification */
+/* struct xpc_notify_sn2 type of notification */
+
+#define	XPC_N_CALL	0x01	/* notify function provided by user */
 
-#define	XPC_N_CALL		0x01	/* notify function provided by user */
+/*
+ * Define uv's version of the notify entry. It additionally is used to allocate
+ * a msg slot on the remote partition into which is copied a sent message.
+ */
+struct xpc_send_msg_slot_uv {
+	struct xpc_fifo_entry_uv next;
+	unsigned int msg_slot_number;
+	xpc_notify_func func;	/* user's notify function */
+	void *key;		/* pointer to user's key */
+};
 
 /*
  * Define the structure that manages all the stuff required by a channel. In
@@ -339,8 +399,12 @@ struct xpc_notify {
  * There is an array of these structures for each remote partition. It is
  * allocated at the time a partition becomes active. The array contains one
  * of these structures for each potential channel connection to that partition.
+ */
+
+/*
+ * The following is sn2 only.
  *
- * Each of these structures manages two message queues (circular buffers).
+ * Each channel structure manages two message queues (circular buffers).
  * They are allocated at the time a channel connection is made. One of
  * these message queues (local_msgqueue) holds the locally created messages
  * that are destined for the remote partition. The other of these message
@@ -407,58 +471,72 @@ struct xpc_notify {
  *	new messages, by the clearing of the message flags of the acknowledged
  *	messages.
  */
+
+struct xpc_channel_sn2 {
+	struct xpc_openclose_args *local_openclose_args; /* args passed on */
+					     /* opening or closing of channel */
+
+	void *local_msgqueue_base;	/* base address of kmalloc'd space */
+	struct xpc_msg_sn2 *local_msgqueue;	/* local message queue */
+	void *remote_msgqueue_base;	/* base address of kmalloc'd space */
+	struct xpc_msg_sn2 *remote_msgqueue; /* cached copy of remote */
+					   /* partition's local message queue */
+	unsigned long remote_msgqueue_pa; /* phys addr of remote partition's */
+					  /* local message queue */
+
+	struct xpc_notify_sn2 *notify_queue;/* notify queue for messages sent */
+
+	/* various flavors of local and remote Get/Put values */
+
+	struct xpc_gp_sn2 *local_GP;	/* local Get/Put values */
+	struct xpc_gp_sn2 remote_GP;	/* remote Get/Put values */
+	struct xpc_gp_sn2 w_local_GP;	/* working local Get/Put values */
+	struct xpc_gp_sn2 w_remote_GP;	/* working remote Get/Put values */
+	s64 next_msg_to_pull;	/* Put value of next msg to pull */
+
+	struct mutex msg_to_pull_mutex;	/* next msg to pull serialization */
+};
+
+struct xpc_channel_uv {
+	unsigned long remote_notify_mq_gpa;	/* gru phys address of remote */
+						/* partition's notify mq */
+
+	struct xpc_send_msg_slot_uv *send_msg_slots;
+	struct xpc_notify_mq_msg_uv *recv_msg_slots;
+
+	struct xpc_fifo_head_uv msg_slot_free_list;
+	struct xpc_fifo_head_uv recv_msg_list;	/* deliverable payloads */
+};
+
 struct xpc_channel {
 	short partid;		/* ID of remote partition connected */
 	spinlock_t lock;	/* lock for updating this structure */
-	u32 flags;		/* general flags */
+	unsigned int flags;	/* general flags */
 
 	enum xp_retval reason;	/* reason why channel is disconnect'g */
 	int reason_line;	/* line# disconnect initiated from */
 
 	u16 number;		/* channel # */
 
-	u16 msg_size;		/* sizeof each msg entry */
+	u16 entry_size;		/* sizeof each msg entry */
 	u16 local_nentries;	/* #of msg entries in local msg queue */
 	u16 remote_nentries;	/* #of msg entries in remote msg queue */
 
-	void *local_msgqueue_base;	/* base address of kmalloc'd space */
-	struct xpc_msg *local_msgqueue;	/* local message queue */
-	void *remote_msgqueue_base;	/* base address of kmalloc'd space */
-	struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */
-					 /* local message queue */
-	u64 remote_msgqueue_pa;	/* phys addr of remote partition's */
-				/* local message queue */
-
 	atomic_t references;	/* #of external references to queues */
 
 	atomic_t n_on_msg_allocate_wq;	/* #on msg allocation wait queue */
 	wait_queue_head_t msg_allocate_wq;	/* msg allocation wait queue */
 
-	u8 delayed_IPI_flags;	/* IPI flags received, but delayed */
+	u8 delayed_chctl_flags;	/* chctl flags received, but delayed */
 				/* action until channel disconnected */
 
-	/* queue of msg senders who want to be notified when msg received */
-
 	atomic_t n_to_notify;	/* #of msg senders to notify */
-	struct xpc_notify *notify_queue;    /* notify queue for messages sent */
 
 	xpc_channel_func func;	/* user's channel function */
 	void *key;		/* pointer to user's key */
 
-	struct mutex msg_to_pull_mutex;	/* next msg to pull serialization */
 	struct completion wdisconnect_wait;    /* wait for channel disconnect */
 
-	struct xpc_openclose_args *local_openclose_args; /* args passed on */
-					     /* opening or closing of channel */
-
-	/* various flavors of local and remote Get/Put values */
-
-	struct xpc_gp *local_GP;	/* local Get/Put values */
-	struct xpc_gp remote_GP;	/* remote Get/Put values */
-	struct xpc_gp w_local_GP;	/* working local Get/Put values */
-	struct xpc_gp w_remote_GP;	/* working remote Get/Put values */
-	s64 next_msg_to_pull;	/* Put value of next msg to pull */
-
 	/* kthread management related fields */
 
 	atomic_t kthreads_assigned;	/* #of kthreads assigned to channel */
@@ -469,6 +547,11 @@ struct xpc_channel {
 
 	wait_queue_head_t idle_wq;	/* idle kthread wait queue */
 
+	union {
+		struct xpc_channel_sn2 sn2;
+		struct xpc_channel_uv uv;
+	} sn;
+
 } ____cacheline_aligned;
 
 /* struct xpc_channel flags */
@@ -501,33 +584,128 @@ struct xpc_channel {
 #define	XPC_C_WDISCONNECT	0x00040000  /* waiting for channel disconnect */
 
 /*
- * Manages channels on a partition basis. There is one of these structures
+ * The channel control flags (chctl) union consists of a 64-bit variable which
+ * is divided up into eight bytes, ordered from right to left. Byte zero
+ * pertains to channel 0, byte one to channel 1, and so on. Each channel's byte
+ * can have one or more of the chctl flags set in it.
+ */
+
+union xpc_channel_ctl_flags {
+	u64 all_flags;
+	u8 flags[XPC_MAX_NCHANNELS];
+};
+
+/* chctl flags */
+#define	XPC_CHCTL_CLOSEREQUEST	0x01
+#define	XPC_CHCTL_CLOSEREPLY	0x02
+#define	XPC_CHCTL_OPENREQUEST	0x04
+#define	XPC_CHCTL_OPENREPLY	0x08
+#define	XPC_CHCTL_MSGREQUEST	0x10
+
+#define XPC_OPENCLOSE_CHCTL_FLAGS \
+			(XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \
+			 XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY)
+#define XPC_MSG_CHCTL_FLAGS	XPC_CHCTL_MSGREQUEST
+
+static inline int
+xpc_any_openclose_chctl_flags_set(union xpc_channel_ctl_flags *chctl)
+{
+	int ch_number;
+
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) {
+		if (chctl->flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS)
+			return 1;
+	}
+	return 0;
+}
+
+static inline int
+xpc_any_msg_chctl_flags_set(union xpc_channel_ctl_flags *chctl)
+{
+	int ch_number;
+
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) {
+		if (chctl->flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * Manage channels on a partition basis. There is one of these structures
  * for each partition (a partition will never utilize the structure that
  * represents itself).
  */
+
+struct xpc_partition_sn2 {
+	unsigned long remote_amos_page_pa; /* paddr of partition's amos page */
+	int activate_IRQ_nasid;	/* active partition's act/deact nasid */
+	int activate_IRQ_phys_cpuid;	/* active part's act/deact phys cpuid */
+
+	unsigned long remote_vars_pa;	/* phys addr of partition's vars */
+	unsigned long remote_vars_part_pa; /* paddr of partition's vars part */
+	u8 remote_vars_version;	/* version# of partition's vars */
+
+	void *local_GPs_base;	/* base address of kmalloc'd space */
+	struct xpc_gp_sn2 *local_GPs;	/* local Get/Put values */
+	void *remote_GPs_base;	/* base address of kmalloc'd space */
+	struct xpc_gp_sn2 *remote_GPs;	/* copy of remote partition's local */
+					/* Get/Put values */
+	unsigned long remote_GPs_pa; /* phys addr of remote partition's local */
+				     /* Get/Put values */
+
+	void *local_openclose_args_base;   /* base address of kmalloc'd space */
+	struct xpc_openclose_args *local_openclose_args;      /* local's args */
+	unsigned long remote_openclose_args_pa;	/* phys addr of remote's args */
+
+	int notify_IRQ_nasid;	/* nasid of where to send notify IRQs */
+	int notify_IRQ_phys_cpuid;	/* CPUID of where to send notify IRQs */
+	char notify_IRQ_owner[8];	/* notify IRQ's owner's name */
+
+	struct amo *remote_chctl_amo_va; /* addr of remote chctl flags' amo */
+	struct amo *local_chctl_amo_va;	/* address of chctl flags' amo */
+
+	struct timer_list dropped_notify_IRQ_timer;	/* dropped IRQ timer */
+};
+
+struct xpc_partition_uv {
+	unsigned long remote_activate_mq_gpa;	/* gru phys address of remote */
+						/* partition's activate mq */
+	spinlock_t flags_lock;	/* protect updating of flags */
+	unsigned int flags;	/* general flags */
+	u8 remote_act_state;	/* remote partition's act_state */
+	u8 act_state_req;	/* act_state request from remote partition */
+	enum xp_retval reason;	/* reason for deactivate act_state request */
+	u64 heartbeat;		/* incremented by remote partition */
+};
+
+/* struct xpc_partition_uv flags */
+
+#define XPC_P_HEARTBEAT_OFFLINE_UV	0x00000001
+#define XPC_P_ENGAGED_UV		0x00000002
+
+/* struct xpc_partition_uv act_state change requests */
+
+#define XPC_P_ASR_ACTIVATE_UV		0x01
+#define XPC_P_ASR_REACTIVATE_UV		0x02
+#define XPC_P_ASR_DEACTIVATE_UV		0x03
+
 struct xpc_partition {
 
 	/* XPC HB infrastructure */
 
 	u8 remote_rp_version;	/* version# of partition's rsvd pg */
-	struct timespec remote_rp_stamp; /* time when rsvd pg was initialized */
-	u64 remote_rp_pa;	/* phys addr of partition's rsvd pg */
-	u64 remote_vars_pa;	/* phys addr of partition's vars */
-	u64 remote_vars_part_pa;	/* phys addr of partition's vars part */
+	unsigned long remote_rp_ts_jiffies; /* timestamp when rsvd pg setup */
+	unsigned long remote_rp_pa;	/* phys addr of partition's rsvd pg */
 	u64 last_heartbeat;	/* HB at last read */
-	u64 remote_amos_page_pa;	/* phys addr of partition's amos page */
-	int remote_act_nasid;	/* active part's act/deact nasid */
-	int remote_act_phys_cpuid;	/* active part's act/deact phys cpuid */
-	u32 act_IRQ_rcvd;	/* IRQs since activation */
+	u32 activate_IRQ_rcvd;	/* IRQs since activation */
 	spinlock_t act_lock;	/* protect updating of act_state */
 	u8 act_state;		/* from XPC HB viewpoint */
-	u8 remote_vars_version;	/* version# of partition's vars */
 	enum xp_retval reason;	/* reason partition is deactivating */
 	int reason_line;	/* line# deactivation initiated from */
-	int reactivate_nasid;	/* nasid in partition to reactivate */
 
-	unsigned long disengage_request_timeout;	/* timeout in jiffies */
-	struct timer_list disengage_request_timer;
+	unsigned long disengage_timeout;	/* timeout in jiffies */
+	struct timer_list disengage_timer;
 
 	/* XPC infrastructure referencing and teardown control */
 
@@ -535,85 +713,63 @@ struct xpc_partition {
 	wait_queue_head_t teardown_wq;	/* kthread waiting to teardown infra */
 	atomic_t references;	/* #of references to infrastructure */
 
-	/*
-	 * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN
-	 * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION
-	 * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE
-	 * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.)
-	 */
-
 	u8 nchannels;		/* #of defined channels supported */
 	atomic_t nchannels_active;  /* #of channels that are not DISCONNECTED */
 	atomic_t nchannels_engaged;  /* #of channels engaged with remote part */
 	struct xpc_channel *channels;	/* array of channel structures */
 
-	void *local_GPs_base;	/* base address of kmalloc'd space */
-	struct xpc_gp *local_GPs;	/* local Get/Put values */
-	void *remote_GPs_base;	/* base address of kmalloc'd space */
-	struct xpc_gp *remote_GPs;	/* copy of remote partition's local */
-					/* Get/Put values */
-	u64 remote_GPs_pa;	/* phys address of remote partition's local */
-				/* Get/Put values */
+	/* fields used for managing channel avialability and activity */
 
-	/* fields used to pass args when opening or closing a channel */
+	union xpc_channel_ctl_flags chctl; /* chctl flags yet to be processed */
+	spinlock_t chctl_lock;	/* chctl flags lock */
 
-	void *local_openclose_args_base;   /* base address of kmalloc'd space */
-	struct xpc_openclose_args *local_openclose_args;      /* local's args */
 	void *remote_openclose_args_base;  /* base address of kmalloc'd space */
 	struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */
 							  /* args */
-	u64 remote_openclose_args_pa;	/* phys addr of remote's args */
-
-	/* IPI sending, receiving and handling related fields */
-
-	int remote_IPI_nasid;	/* nasid of where to send IPIs */
-	int remote_IPI_phys_cpuid;	/* phys CPU ID of where to send IPIs */
-	AMO_t *remote_IPI_amo_va;    /* address of remote IPI AMO_t structure */
-
-	AMO_t *local_IPI_amo_va;	/* address of IPI AMO_t structure */
-	u64 local_IPI_amo;	/* IPI amo flags yet to be handled */
-	char IPI_owner[8];	/* IPI owner's name */
-	struct timer_list dropped_IPI_timer;	/* dropped IPI timer */
-
-	spinlock_t IPI_lock;	/* IPI handler lock */
 
 	/* channel manager related fields */
 
 	atomic_t channel_mgr_requests;	/* #of requests to activate chan mgr */
 	wait_queue_head_t channel_mgr_wq;	/* channel mgr's wait queue */
 
+	union {
+		struct xpc_partition_sn2 sn2;
+		struct xpc_partition_uv uv;
+	} sn;
+
 } ____cacheline_aligned;
 
 /* struct xpc_partition act_state values (for XPC HB) */
 
-#define	XPC_P_INACTIVE		0x00	/* partition is not active */
-#define XPC_P_ACTIVATION_REQ	0x01	/* created thread to activate */
-#define XPC_P_ACTIVATING	0x02	/* activation thread started */
-#define XPC_P_ACTIVE		0x03	/* xpc_partition_up() was called */
-#define XPC_P_DEACTIVATING	0x04	/* partition deactivation initiated */
+#define	XPC_P_AS_INACTIVE	0x00	/* partition is not active */
+#define XPC_P_AS_ACTIVATION_REQ	0x01	/* created thread to activate */
+#define XPC_P_AS_ACTIVATING	0x02	/* activation thread started */
+#define XPC_P_AS_ACTIVE		0x03	/* xpc_partition_up() was called */
+#define XPC_P_AS_DEACTIVATING	0x04	/* partition deactivation initiated */
 
 #define XPC_DEACTIVATE_PARTITION(_p, _reason) \
 			xpc_deactivate_partition(__LINE__, (_p), (_reason))
 
 /* struct xpc_partition setup_state values */
 
-#define XPC_P_UNSET		0x00	/* infrastructure was never setup */
-#define XPC_P_SETUP		0x01	/* infrastructure is setup */
-#define XPC_P_WTEARDOWN		0x02	/* waiting to teardown infrastructure */
-#define XPC_P_TORNDOWN		0x03	/* infrastructure is torndown */
+#define XPC_P_SS_UNSET		0x00	/* infrastructure was never setup */
+#define XPC_P_SS_SETUP		0x01	/* infrastructure is setup */
+#define XPC_P_SS_WTEARDOWN	0x02	/* waiting to teardown infrastructure */
+#define XPC_P_SS_TORNDOWN	0x03	/* infrastructure is torndown */
 
 /*
- * struct xpc_partition IPI_timer #of seconds to wait before checking for
- * dropped IPIs. These occur whenever an IPI amo write doesn't complete until
- * after the IPI was received.
+ * struct xpc_partition_sn2's dropped notify IRQ timer is set to wait the
+ * following interval #of seconds before checking for dropped notify IRQs.
+ * These can occur whenever an IRQ's associated amo write doesn't complete
+ * until after the IRQ was received.
  */
-#define XPC_P_DROPPED_IPI_WAIT	(0.25 * HZ)
+#define XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL	(0.25 * HZ)
 
 /* number of seconds to wait for other partitions to disengage */
-#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT	90
+#define XPC_DISENGAGE_DEFAULT_TIMELIMIT		90
 
-/* interval in seconds to print 'waiting disengagement' messages */
-#define XPC_DISENGAGE_PRINTMSG_INTERVAL		10
+/* interval in seconds to print 'waiting deactivation' messages */
+#define XPC_DEACTIVATE_PRINTMSG_INTERVAL	10
 
 #define XPC_PARTID(_p)	((short)((_p) - &xpc_partitions[0]))
 
@@ -623,33 +779,92 @@ extern struct xpc_registration xpc_registrations[];
 /* found in xpc_main.c */
 extern struct device *xpc_part;
 extern struct device *xpc_chan;
-extern int xpc_disengage_request_timelimit;
-extern int xpc_disengage_request_timedout;
-extern irqreturn_t xpc_notify_IRQ_handler(int, void *);
-extern void xpc_dropped_IPI_check(struct xpc_partition *);
+extern int xpc_disengage_timelimit;
+extern int xpc_disengage_timedout;
+extern int xpc_activate_IRQ_rcvd;
+extern spinlock_t xpc_activate_IRQ_rcvd_lock;
+extern wait_queue_head_t xpc_activate_IRQ_wq;
+extern void *xpc_heartbeating_to_mask;
+extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **);
 extern void xpc_activate_partition(struct xpc_partition *);
 extern void xpc_activate_kthreads(struct xpc_channel *, int);
 extern void xpc_create_kthreads(struct xpc_channel *, int, int);
 extern void xpc_disconnect_wait(int);
+extern int (*xpc_setup_partitions_sn) (void);
+extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *,
+							 unsigned long *,
+							 size_t *);
+extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *);
+extern void (*xpc_heartbeat_init) (void);
+extern void (*xpc_heartbeat_exit) (void);
+extern void (*xpc_increment_heartbeat) (void);
+extern void (*xpc_offline_heartbeat) (void);
+extern void (*xpc_online_heartbeat) (void);
+extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
+extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
+extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
+extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
+extern void (*xpc_teardown_msg_structures) (struct xpc_channel *);
+extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *);
+extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int);
+extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *);
+extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *);
+extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *,
+						 unsigned long, int);
+extern void (*xpc_request_partition_reactivation) (struct xpc_partition *);
+extern void (*xpc_request_partition_deactivation) (struct xpc_partition *);
+extern void (*xpc_cancel_partition_deactivation_request) (
+							struct xpc_partition *);
+extern void (*xpc_process_activate_IRQ_rcvd) (void);
+extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *);
+extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *);
+
+extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *);
+extern int (*xpc_partition_engaged) (short);
+extern int (*xpc_any_partition_engaged) (void);
+extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *);
+extern void (*xpc_assume_partition_disengaged) (short);
+
+extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *,
+					    unsigned long *);
+extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
+					  unsigned long *);
+extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
+					   unsigned long *);
+extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+
+extern void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
+					    unsigned long);
+
+extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *,
+					   u16, u8, xpc_notify_func, void *);
+extern void (*xpc_received_payload) (struct xpc_channel *, void *);
+
+/* found in xpc_sn2.c */
+extern int xpc_init_sn2(void);
+extern void xpc_exit_sn2(void);
+
+/* found in xpc_uv.c */
+extern int xpc_init_uv(void);
+extern void xpc_exit_uv(void);
 
 /* found in xpc_partition.c */
 extern int xpc_exiting;
-extern struct xpc_vars *xpc_vars;
+extern int xpc_nasid_mask_nlongs;
 extern struct xpc_rsvd_page *xpc_rsvd_page;
-extern struct xpc_vars_part *xpc_vars_part;
-extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
-extern char *xpc_remote_copy_buffer;
-extern void *xpc_remote_copy_buffer_base;
+extern unsigned long *xpc_mach_nasids;
+extern struct xpc_partition *xpc_partitions;
 extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **);
-extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
-extern void xpc_allow_IPI_ops(void);
-extern void xpc_restrict_IPI_ops(void);
-extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_setup_rsvd_page(void);
+extern void xpc_teardown_rsvd_page(void);
+extern int xpc_identify_activate_IRQ_sender(void);
 extern int xpc_partition_disengaged(struct xpc_partition *);
 extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *);
 extern void xpc_mark_partition_inactive(struct xpc_partition *);
 extern void xpc_discovery(void);
-extern void xpc_check_remote_hb(void);
+extern enum xp_retval xpc_get_remote_rp(int, unsigned long *,
+					struct xpc_rsvd_page *,
+					unsigned long *);
 extern void xpc_deactivate_partition(const int, struct xpc_partition *,
 				     enum xp_retval);
 extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
@@ -657,21 +872,52 @@ extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
 /* found in xpc_channel.c */
 extern void xpc_initiate_connect(int);
 extern void xpc_initiate_disconnect(int);
-extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **);
-extern enum xp_retval xpc_initiate_send(short, int, void *);
-extern enum xp_retval xpc_initiate_send_notify(short, int, void *,
+extern enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *);
+extern enum xp_retval xpc_initiate_send(short, int, u32, void *, u16);
+extern enum xp_retval xpc_initiate_send_notify(short, int, u32, void *, u16,
 					       xpc_notify_func, void *);
 extern void xpc_initiate_received(short, int, void *);
-extern enum xp_retval xpc_setup_infrastructure(struct xpc_partition *);
-extern enum xp_retval xpc_pull_remote_vars_part(struct xpc_partition *);
-extern void xpc_process_channel_activity(struct xpc_partition *);
+extern void xpc_process_sent_chctl_flags(struct xpc_partition *);
 extern void xpc_connected_callout(struct xpc_channel *);
-extern void xpc_deliver_msg(struct xpc_channel *);
+extern void xpc_deliver_payload(struct xpc_channel *);
 extern void xpc_disconnect_channel(const int, struct xpc_channel *,
 				   enum xp_retval, unsigned long *);
 extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
 extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
-extern void xpc_teardown_infrastructure(struct xpc_partition *);
+
+static inline int
+xpc_hb_allowed(short partid, void *heartbeating_to_mask)
+{
+	return test_bit(partid, heartbeating_to_mask);
+}
+
+static inline int
+xpc_any_hbs_allowed(void)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions);
+}
+
+static inline void
+xpc_allow_hb(short partid)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	set_bit(partid, xpc_heartbeating_to_mask);
+}
+
+static inline void
+xpc_disallow_hb(short partid)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	clear_bit(partid, xpc_heartbeating_to_mask);
+}
+
+static inline void
+xpc_disallow_all_hbs(void)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions);
+}
 
 static inline void
 xpc_wakeup_channel_mgr(struct xpc_partition *part)
@@ -713,7 +959,7 @@ xpc_part_deref(struct xpc_partition *part)
 	s32 refs = atomic_dec_return(&part->references);
 
 	DBUG_ON(refs < 0);
-	if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN)
+	if (refs == 0 && part->setup_state == XPC_P_SS_WTEARDOWN)
 		wake_up(&part->teardown_wq);
 }
 
@@ -723,7 +969,7 @@ xpc_part_ref(struct xpc_partition *part)
 	int setup;
 
 	atomic_inc(&part->references);
-	setup = (part->setup_state == XPC_P_SETUP);
+	setup = (part->setup_state == XPC_P_SS_SETUP);
 	if (!setup)
 		xpc_part_deref(part);
 
@@ -741,416 +987,4 @@ xpc_part_ref(struct xpc_partition *part)
 		(_p)->reason_line = _line; \
 	}
 
-/*
- * This next set of inlines are used to keep track of when a partition is
- * potentially engaged in accessing memory belonging to another partition.
- */
-
-static inline void
-xpc_mark_partition_engaged(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_ENGAGED_PARTITIONS_AMO *
-				    sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* set bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
-			 (1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_mark_partition_disengaged(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_ENGAGED_PARTITIONS_AMO *
-				    sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* clear bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~(1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_request_partition_disengage(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* set bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
-			 (1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_cancel_partition_disengage_request(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* clear bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~(1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline u64
-xpc_partition_engaged(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
-	/* return our partition's AMO variable ANDed with partid_mask */
-	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
-		partid_mask);
-}
-
-static inline u64
-xpc_partition_disengage_requested(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
-	/* return our partition's AMO variable ANDed with partid_mask */
-	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
-		partid_mask);
-}
-
-static inline void
-xpc_clear_partition_engaged(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
-	/* clear bit(s) based on partid_mask in our partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~partid_mask);
-}
-
-static inline void
-xpc_clear_partition_disengage_request(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
-	/* clear bit(s) based on partid_mask in our partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~partid_mask);
-}
-
-/*
- * The following set of macros and inlines are used for the sending and
- * receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
- * one that is associated with partition activity (SGI_XPC_ACTIVATE) and
- * the other that is associated with channel activity (SGI_XPC_NOTIFY).
- */
-
-static inline u64
-xpc_IPI_receive(AMO_t *amo)
-{
-	return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
-}
-
-static inline enum xp_retval
-xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
-{
-	int ret = 0;
-	unsigned long irq_flags;
-
-	local_irq_save(irq_flags);
-
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag);
-	sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
-
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-
-	return ((ret == 0) ? xpSuccess : xpPioReadError);
-}
-
-/*
- * IPIs associated with SGI_XPC_ACTIVATE IRQ.
- */
-
-/*
- * Flag the appropriate AMO variable and send an IPI to the specified node.
- */
-static inline void
-xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
-		      int to_phys_cpuid)
-{
-	int w_index = XPC_NASID_W_INDEX(from_nasid);
-	int b_index = XPC_NASID_B_INDEX(from_nasid);
-	AMO_t *amos = (AMO_t *)__va(amos_page_pa +
-				    (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
-
-	(void)xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
-			   to_phys_cpuid, SGI_XPC_ACTIVATE);
-}
-
-static inline void
-xpc_IPI_send_activate(struct xpc_vars *vars)
-{
-	xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0),
-			      vars->act_nasid, vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_activated(struct xpc_partition *part)
-{
-	xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
-			      part->remote_act_nasid,
-			      part->remote_act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_reactivate(struct xpc_partition *part)
-{
-	xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid,
-			      xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_disengage(struct xpc_partition *part)
-{
-	xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
-			      part->remote_act_nasid,
-			      part->remote_act_phys_cpuid);
-}
-
-/*
- * IPIs associated with SGI_XPC_NOTIFY IRQ.
- */
-
-/*
- * Send an IPI to the remote partition that is associated with the
- * specified channel.
- */
-#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \
-		xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f)
-
-static inline void
-xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string,
-		    unsigned long *irq_flags)
-{
-	struct xpc_partition *part = &xpc_partitions[ch->partid];
-	enum xp_retval ret;
-
-	if (likely(part->act_state != XPC_P_DEACTIVATING)) {
-		ret = xpc_IPI_send(part->remote_IPI_amo_va,
-				   (u64)ipi_flag << (ch->number * 8),
-				   part->remote_IPI_nasid,
-				   part->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY);
-		dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
-			ipi_flag_string, ch->partid, ch->number, ret);
-		if (unlikely(ret != xpSuccess)) {
-			if (irq_flags != NULL)
-				spin_unlock_irqrestore(&ch->lock, *irq_flags);
-			XPC_DEACTIVATE_PARTITION(part, ret);
-			if (irq_flags != NULL)
-				spin_lock_irqsave(&ch->lock, *irq_flags);
-		}
-	}
-}
-
-/*
- * Make it look like the remote partition, which is associated with the
- * specified channel, sent us an IPI. This faked IPI will be handled
- * by xpc_dropped_IPI_check().
- */
-#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \
-		xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f)
-
-static inline void
-xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
-			  char *ipi_flag_string)
-{
-	struct xpc_partition *part = &xpc_partitions[ch->partid];
-
-	FETCHOP_STORE_OP(TO_AMO((u64)&part->local_IPI_amo_va->variable),
-			 FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8)));
-	dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
-		ipi_flag_string, ch->partid, ch->number);
-}
-
-/*
- * The sending and receiving of IPIs includes the setting of an AMO variable
- * to indicate the reason the IPI was sent. The 64-bit variable is divided
- * up into eight bytes, ordered from right to left. Byte zero pertains to
- * channel 0, byte one to channel 1, and so on. Each byte is described by
- * the following IPI flags.
- */
-
-#define	XPC_IPI_CLOSEREQUEST	0x01
-#define	XPC_IPI_CLOSEREPLY	0x02
-#define	XPC_IPI_OPENREQUEST	0x04
-#define	XPC_IPI_OPENREPLY	0x08
-#define	XPC_IPI_MSGREQUEST	0x10
-
-/* given an AMO variable and a channel#, get its associated IPI flags */
-#define XPC_GET_IPI_FLAGS(_amo, _c)	((u8) (((_amo) >> ((_c) * 8)) & 0xff))
-#define XPC_SET_IPI_FLAGS(_amo, _c, _f)	(_amo) |= ((u64) (_f) << ((_c) * 8))
-
-#define	XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0fUL)
-#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo)       ((_amo) & 0x1010101010101010UL)
-
-static inline void
-xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	struct xpc_openclose_args *args = ch->local_openclose_args;
-
-	args->reason = ch->reason;
-
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	struct xpc_openclose_args *args = ch->local_openclose_args;
-
-	args->msg_size = ch->msg_size;
-	args->local_nentries = ch->local_nentries;
-
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	struct xpc_openclose_args *args = ch->local_openclose_args;
-
-	args->remote_nentries = ch->remote_nentries;
-	args->local_nentries = ch->local_nentries;
-	args->local_msgqueue_pa = __pa(ch->local_msgqueue);
-
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_msgrequest(struct xpc_channel *ch)
-{
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL);
-}
-
-static inline void
-xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
-{
-	XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST);
-}
-
-/*
- * Memory for XPC's AMO variables is allocated by the MSPEC driver. These
- * pages are located in the lowest granule. The lowest granule uses 4k pages
- * for cached references and an alternate TLB handler to never provide a
- * cacheable mapping for the entire region. This will prevent speculative
- * reading of cached copies of our lines from being issued which will cause
- * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
- * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
- * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
- * activation and 2 AMO variables for partition deactivation.
- */
-static inline AMO_t *
-xpc_IPI_init(int index)
-{
-	AMO_t *amo = xpc_vars->amos_page + index;
-
-	(void)xpc_IPI_receive(amo);	/* clear AMO variable */
-	return amo;
-}
-
-static inline enum xp_retval
-xpc_map_bte_errors(bte_result_t error)
-{
-	return ((error == BTE_SUCCESS) ? xpSuccess : xpBteCopyError);
-}
-
-/*
- * Check to see if there is any channel activity to/from the specified
- * partition.
- */
-static inline void
-xpc_check_for_channel_activity(struct xpc_partition *part)
-{
-	u64 IPI_amo;
-	unsigned long irq_flags;
-
-	IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va);
-	if (IPI_amo == 0)
-		return;
-
-	spin_lock_irqsave(&part->IPI_lock, irq_flags);
-	part->local_IPI_amo |= IPI_amo;
-	spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
-	dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n",
-		XPC_PARTID(part), IPI_amo);
-
-	xpc_wakeup_channel_mgr(part);
-}
-
 #endif /* _DRIVERS_MISC_SGIXP_XPC_H */
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 9c90c2d55c0..9cd2ebe2a3b 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -14,536 +14,10 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/completion.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/sn_sal.h>
+#include <linux/device.h>
 #include "xpc.h"
 
 /*
- * Guarantee that the kzalloc'd memory is cacheline aligned.
- */
-static void *
-xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
-{
-	/* see if kzalloc will give us cachline aligned memory by default */
-	*base = kzalloc(size, flags);
-	if (*base == NULL)
-		return NULL;
-
-	if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
-		return *base;
-
-	kfree(*base);
-
-	/* nope, we'll have to do it ourselves */
-	*base = kzalloc(size + L1_CACHE_BYTES, flags);
-	if (*base == NULL)
-		return NULL;
-
-	return (void *)L1_CACHE_ALIGN((u64)*base);
-}
-
-/*
- * Set up the initial values for the XPartition Communication channels.
- */
-static void
-xpc_initialize_channels(struct xpc_partition *part, short partid)
-{
-	int ch_number;
-	struct xpc_channel *ch;
-
-	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
-		ch = &part->channels[ch_number];
-
-		ch->partid = partid;
-		ch->number = ch_number;
-		ch->flags = XPC_C_DISCONNECTED;
-
-		ch->local_GP = &part->local_GPs[ch_number];
-		ch->local_openclose_args =
-		    &part->local_openclose_args[ch_number];
-
-		atomic_set(&ch->kthreads_assigned, 0);
-		atomic_set(&ch->kthreads_idle, 0);
-		atomic_set(&ch->kthreads_active, 0);
-
-		atomic_set(&ch->references, 0);
-		atomic_set(&ch->n_to_notify, 0);
-
-		spin_lock_init(&ch->lock);
-		mutex_init(&ch->msg_to_pull_mutex);
-		init_completion(&ch->wdisconnect_wait);
-
-		atomic_set(&ch->n_on_msg_allocate_wq, 0);
-		init_waitqueue_head(&ch->msg_allocate_wq);
-		init_waitqueue_head(&ch->idle_wq);
-	}
-}
-
-/*
- * Setup the infrastructure necessary to support XPartition Communication
- * between the specified remote partition and the local one.
- */
-enum xp_retval
-xpc_setup_infrastructure(struct xpc_partition *part)
-{
-	int ret, cpuid;
-	struct timer_list *timer;
-	short partid = XPC_PARTID(part);
-
-	/*
-	 * Zero out MOST of the entry for this partition. Only the fields
-	 * starting with `nchannels' will be zeroed. The preceding fields must
-	 * remain `viable' across partition ups and downs, since they may be
-	 * referenced during this memset() operation.
-	 */
-	memset(&part->nchannels, 0, sizeof(struct xpc_partition) -
-	       offsetof(struct xpc_partition, nchannels));
-
-	/*
-	 * Allocate all of the channel structures as a contiguous chunk of
-	 * memory.
-	 */
-	part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS,
-				 GFP_KERNEL);
-	if (part->channels == NULL) {
-		dev_err(xpc_chan, "can't get memory for channels\n");
-		return xpNoMemory;
-	}
-
-	part->nchannels = XPC_NCHANNELS;
-
-	/* allocate all the required GET/PUT values */
-
-	part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
-							GFP_KERNEL,
-							&part->local_GPs_base);
-	if (part->local_GPs == NULL) {
-		kfree(part->channels);
-		part->channels = NULL;
-		dev_err(xpc_chan, "can't get memory for local get/put "
-			"values\n");
-		return xpNoMemory;
-	}
-
-	part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
-							 GFP_KERNEL,
-							 &part->
-							 remote_GPs_base);
-	if (part->remote_GPs == NULL) {
-		dev_err(xpc_chan, "can't get memory for remote get/put "
-			"values\n");
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpNoMemory;
-	}
-
-	/* allocate all the required open and close args */
-
-	part->local_openclose_args =
-	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
-					  &part->local_openclose_args_base);
-	if (part->local_openclose_args == NULL) {
-		dev_err(xpc_chan, "can't get memory for local connect args\n");
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpNoMemory;
-	}
-
-	part->remote_openclose_args =
-	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
-					  &part->remote_openclose_args_base);
-	if (part->remote_openclose_args == NULL) {
-		dev_err(xpc_chan, "can't get memory for remote connect args\n");
-		kfree(part->local_openclose_args_base);
-		part->local_openclose_args = NULL;
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpNoMemory;
-	}
-
-	xpc_initialize_channels(part, partid);
-
-	atomic_set(&part->nchannels_active, 0);
-	atomic_set(&part->nchannels_engaged, 0);
-
-	/* local_IPI_amo were set to 0 by an earlier memset() */
-
-	/* Initialize this partitions AMO_t structure */
-	part->local_IPI_amo_va = xpc_IPI_init(partid);
-
-	spin_lock_init(&part->IPI_lock);
-
-	atomic_set(&part->channel_mgr_requests, 1);
-	init_waitqueue_head(&part->channel_mgr_wq);
-
-	sprintf(part->IPI_owner, "xpc%02d", partid);
-	ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED,
-			  part->IPI_owner, (void *)(u64)partid);
-	if (ret != 0) {
-		dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
-			"errno=%d\n", -ret);
-		kfree(part->remote_openclose_args_base);
-		part->remote_openclose_args = NULL;
-		kfree(part->local_openclose_args_base);
-		part->local_openclose_args = NULL;
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpLackOfResources;
-	}
-
-	/* Setup a timer to check for dropped IPIs */
-	timer = &part->dropped_IPI_timer;
-	init_timer(timer);
-	timer->function = (void (*)(unsigned long))xpc_dropped_IPI_check;
-	timer->data = (unsigned long)part;
-	timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT;
-	add_timer(timer);
-
-	/*
-	 * With the setting of the partition setup_state to XPC_P_SETUP, we're
-	 * declaring that this partition is ready to go.
-	 */
-	part->setup_state = XPC_P_SETUP;
-
-	/*
-	 * Setup the per partition specific variables required by the
-	 * remote partition to establish channel connections with us.
-	 *
-	 * The setting of the magic # indicates that these per partition
-	 * specific variables are ready to be used.
-	 */
-	xpc_vars_part[partid].GPs_pa = __pa(part->local_GPs);
-	xpc_vars_part[partid].openclose_args_pa =
-	    __pa(part->local_openclose_args);
-	xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va);
-	cpuid = raw_smp_processor_id();	/* any CPU in this partition will do */
-	xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid);
-	xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid);
-	xpc_vars_part[partid].nchannels = part->nchannels;
-	xpc_vars_part[partid].magic = XPC_VP_MAGIC1;
-
-	return xpSuccess;
-}
-
-/*
- * Create a wrapper that hides the underlying mechanism for pulling a cacheline
- * (or multiple cachelines) from a remote partition.
- *
- * src must be a cacheline aligned physical address on the remote partition.
- * dst must be a cacheline aligned virtual address on this partition.
- * cnt must be an cacheline sized
- */
-static enum xp_retval
-xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst,
-			   const void *src, size_t cnt)
-{
-	bte_result_t bte_ret;
-
-	DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src));
-	DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst));
-	DBUG_ON(cnt != L1_CACHE_ALIGN(cnt));
-
-	if (part->act_state == XPC_P_DEACTIVATING)
-		return part->reason;
-
-	bte_ret = xp_bte_copy((u64)src, (u64)dst, (u64)cnt,
-			      (BTE_NORMAL | BTE_WACQUIRE), NULL);
-	if (bte_ret == BTE_SUCCESS)
-		return xpSuccess;
-
-	dev_dbg(xpc_chan, "xp_bte_copy() from partition %d failed, ret=%d\n",
-		XPC_PARTID(part), bte_ret);
-
-	return xpc_map_bte_errors(bte_ret);
-}
-
-/*
- * Pull the remote per partition specific variables from the specified
- * partition.
- */
-enum xp_retval
-xpc_pull_remote_vars_part(struct xpc_partition *part)
-{
-	u8 buffer[L1_CACHE_BYTES * 2];
-	struct xpc_vars_part *pulled_entry_cacheline =
-	    (struct xpc_vars_part *)L1_CACHE_ALIGN((u64)buffer);
-	struct xpc_vars_part *pulled_entry;
-	u64 remote_entry_cacheline_pa, remote_entry_pa;
-	short partid = XPC_PARTID(part);
-	enum xp_retval ret;
-
-	/* pull the cacheline that contains the variables we're interested in */
-
-	DBUG_ON(part->remote_vars_part_pa !=
-		L1_CACHE_ALIGN(part->remote_vars_part_pa));
-	DBUG_ON(sizeof(struct xpc_vars_part) != L1_CACHE_BYTES / 2);
-
-	remote_entry_pa = part->remote_vars_part_pa +
-	    sn_partition_id * sizeof(struct xpc_vars_part);
-
-	remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1));
-
-	pulled_entry = (struct xpc_vars_part *)((u64)pulled_entry_cacheline +
-						(remote_entry_pa &
-						 (L1_CACHE_BYTES - 1)));
-
-	ret = xpc_pull_remote_cachelines(part, pulled_entry_cacheline,
-					 (void *)remote_entry_cacheline_pa,
-					 L1_CACHE_BYTES);
-	if (ret != xpSuccess) {
-		dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
-			"partition %d, ret=%d\n", partid, ret);
-		return ret;
-	}
-
-	/* see if they've been set up yet */
-
-	if (pulled_entry->magic != XPC_VP_MAGIC1 &&
-	    pulled_entry->magic != XPC_VP_MAGIC2) {
-
-		if (pulled_entry->magic != 0) {
-			dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
-				"partition %d has bad magic value (=0x%lx)\n",
-				partid, sn_partition_id, pulled_entry->magic);
-			return xpBadMagic;
-		}
-
-		/* they've not been initialized yet */
-		return xpRetry;
-	}
-
-	if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) {
-
-		/* validate the variables */
-
-		if (pulled_entry->GPs_pa == 0 ||
-		    pulled_entry->openclose_args_pa == 0 ||
-		    pulled_entry->IPI_amo_pa == 0) {
-
-			dev_err(xpc_chan, "partition %d's XPC vars_part for "
-				"partition %d are not valid\n", partid,
-				sn_partition_id);
-			return xpInvalidAddress;
-		}
-
-		/* the variables we imported look to be valid */
-
-		part->remote_GPs_pa = pulled_entry->GPs_pa;
-		part->remote_openclose_args_pa =
-		    pulled_entry->openclose_args_pa;
-		part->remote_IPI_amo_va =
-		    (AMO_t *)__va(pulled_entry->IPI_amo_pa);
-		part->remote_IPI_nasid = pulled_entry->IPI_nasid;
-		part->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid;
-
-		if (part->nchannels > pulled_entry->nchannels)
-			part->nchannels = pulled_entry->nchannels;
-
-		/* let the other side know that we've pulled their variables */
-
-		xpc_vars_part[partid].magic = XPC_VP_MAGIC2;
-	}
-
-	if (pulled_entry->magic == XPC_VP_MAGIC1)
-		return xpRetry;
-
-	return xpSuccess;
-}
-
-/*
- * Get the IPI flags and pull the openclose args and/or remote GPs as needed.
- */
-static u64
-xpc_get_IPI_flags(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	u64 IPI_amo;
-	enum xp_retval ret;
-
-	/*
-	 * See if there are any IPI flags to be handled.
-	 */
-
-	spin_lock_irqsave(&part->IPI_lock, irq_flags);
-	IPI_amo = part->local_IPI_amo;
-	if (IPI_amo != 0)
-		part->local_IPI_amo = 0;
-
-	spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
-	if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) {
-		ret = xpc_pull_remote_cachelines(part,
-						 part->remote_openclose_args,
-						 (void *)part->
-						 remote_openclose_args_pa,
-						 XPC_OPENCLOSE_ARGS_SIZE);
-		if (ret != xpSuccess) {
-			XPC_DEACTIVATE_PARTITION(part, ret);
-
-			dev_dbg(xpc_chan, "failed to pull openclose args from "
-				"partition %d, ret=%d\n", XPC_PARTID(part),
-				ret);
-
-			/* don't bother processing IPIs anymore */
-			IPI_amo = 0;
-		}
-	}
-
-	if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) {
-		ret = xpc_pull_remote_cachelines(part, part->remote_GPs,
-						 (void *)part->remote_GPs_pa,
-						 XPC_GP_SIZE);
-		if (ret != xpSuccess) {
-			XPC_DEACTIVATE_PARTITION(part, ret);
-
-			dev_dbg(xpc_chan, "failed to pull GPs from partition "
-				"%d, ret=%d\n", XPC_PARTID(part), ret);
-
-			/* don't bother processing IPIs anymore */
-			IPI_amo = 0;
-		}
-	}
-
-	return IPI_amo;
-}
-
-/*
- * Allocate the local message queue and the notify queue.
- */
-static enum xp_retval
-xpc_allocate_local_msgqueue(struct xpc_channel *ch)
-{
-	unsigned long irq_flags;
-	int nentries;
-	size_t nbytes;
-
-	for (nentries = ch->local_nentries; nentries > 0; nentries--) {
-
-		nbytes = nentries * ch->msg_size;
-		ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
-								   GFP_KERNEL,
-						      &ch->local_msgqueue_base);
-		if (ch->local_msgqueue == NULL)
-			continue;
-
-		nbytes = nentries * sizeof(struct xpc_notify);
-		ch->notify_queue = kzalloc(nbytes, GFP_KERNEL);
-		if (ch->notify_queue == NULL) {
-			kfree(ch->local_msgqueue_base);
-			ch->local_msgqueue = NULL;
-			continue;
-		}
-
-		spin_lock_irqsave(&ch->lock, irq_flags);
-		if (nentries < ch->local_nentries) {
-			dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, "
-				"partid=%d, channel=%d\n", nentries,
-				ch->local_nentries, ch->partid, ch->number);
-
-			ch->local_nentries = nentries;
-		}
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return xpSuccess;
-	}
-
-	dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
-		"queue, partid=%d, channel=%d\n", ch->partid, ch->number);
-	return xpNoMemory;
-}
-
-/*
- * Allocate the cached remote message queue.
- */
-static enum xp_retval
-xpc_allocate_remote_msgqueue(struct xpc_channel *ch)
-{
-	unsigned long irq_flags;
-	int nentries;
-	size_t nbytes;
-
-	DBUG_ON(ch->remote_nentries <= 0);
-
-	for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
-
-		nbytes = nentries * ch->msg_size;
-		ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
-								    GFP_KERNEL,
-						     &ch->remote_msgqueue_base);
-		if (ch->remote_msgqueue == NULL)
-			continue;
-
-		spin_lock_irqsave(&ch->lock, irq_flags);
-		if (nentries < ch->remote_nentries) {
-			dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, "
-				"partid=%d, channel=%d\n", nentries,
-				ch->remote_nentries, ch->partid, ch->number);
-
-			ch->remote_nentries = nentries;
-		}
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return xpSuccess;
-	}
-
-	dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
-		"partid=%d, channel=%d\n", ch->partid, ch->number);
-	return xpNoMemory;
-}
-
-/*
- * Allocate message queues and other stuff associated with a channel.
- *
- * Note: Assumes all of the channel sizes are filled in.
- */
-static enum xp_retval
-xpc_allocate_msgqueues(struct xpc_channel *ch)
-{
-	unsigned long irq_flags;
-	enum xp_retval ret;
-
-	DBUG_ON(ch->flags & XPC_C_SETUP);
-
-	ret = xpc_allocate_local_msgqueue(ch);
-	if (ret != xpSuccess)
-		return ret;
-
-	ret = xpc_allocate_remote_msgqueue(ch);
-	if (ret != xpSuccess) {
-		kfree(ch->local_msgqueue_base);
-		ch->local_msgqueue = NULL;
-		kfree(ch->notify_queue);
-		ch->notify_queue = NULL;
-		return ret;
-	}
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	ch->flags |= XPC_C_SETUP;
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-
-	return xpSuccess;
-}
-
-/*
  * Process a connect message from a remote partition.
  *
  * Note: xpc_process_connect() is expecting to be called with the
@@ -565,30 +39,29 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	if (!(ch->flags & XPC_C_SETUP)) {
 		spin_unlock_irqrestore(&ch->lock, *irq_flags);
-		ret = xpc_allocate_msgqueues(ch);
+		ret = xpc_setup_msg_structures(ch);
 		spin_lock_irqsave(&ch->lock, *irq_flags);
 
 		if (ret != xpSuccess)
 			XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
 
+		ch->flags |= XPC_C_SETUP;
+
 		if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
 			return;
 
-		DBUG_ON(!(ch->flags & XPC_C_SETUP));
 		DBUG_ON(ch->local_msgqueue == NULL);
 		DBUG_ON(ch->remote_msgqueue == NULL);
 	}
 
 	if (!(ch->flags & XPC_C_OPENREPLY)) {
 		ch->flags |= XPC_C_OPENREPLY;
-		xpc_IPI_send_openreply(ch, irq_flags);
+		xpc_send_chctl_openreply(ch, irq_flags);
 	}
 
 	if (!(ch->flags & XPC_C_ROPENREPLY))
 		return;
 
-	DBUG_ON(ch->remote_msgqueue_pa == 0);
-
 	ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP);	/* clear all else */
 
 	dev_info(xpc_chan, "channel %d to partition %d connected\n",
@@ -600,99 +73,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 }
 
 /*
- * Notify those who wanted to be notified upon delivery of their message.
- */
-static void
-xpc_notify_senders(struct xpc_channel *ch, enum xp_retval reason, s64 put)
-{
-	struct xpc_notify *notify;
-	u8 notify_type;
-	s64 get = ch->w_remote_GP.get - 1;
-
-	while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
-
-		notify = &ch->notify_queue[get % ch->local_nentries];
-
-		/*
-		 * See if the notify entry indicates it was associated with
-		 * a message who's sender wants to be notified. It is possible
-		 * that it is, but someone else is doing or has done the
-		 * notification.
-		 */
-		notify_type = notify->type;
-		if (notify_type == 0 ||
-		    cmpxchg(&notify->type, notify_type, 0) != notify_type) {
-			continue;
-		}
-
-		DBUG_ON(notify_type != XPC_N_CALL);
-
-		atomic_dec(&ch->n_to_notify);
-
-		if (notify->func != NULL) {
-			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *)notify, get, ch->partid, ch->number);
-
-			notify->func(reason, ch->partid, ch->number,
-				     notify->key);
-
-			dev_dbg(xpc_chan, "notify->func() returned, "
-				"notify=0x%p, msg_number=%ld, partid=%d, "
-				"channel=%d\n", (void *)notify, get,
-				ch->partid, ch->number);
-		}
-	}
-}
-
-/*
- * Free up message queues and other stuff that were allocated for the specified
- * channel.
- *
- * Note: ch->reason and ch->reason_line are left set for debugging purposes,
- * they're cleared when XPC_C_DISCONNECTED is cleared.
- */
-static void
-xpc_free_msgqueues(struct xpc_channel *ch)
-{
-	DBUG_ON(!spin_is_locked(&ch->lock));
-	DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
-
-	ch->remote_msgqueue_pa = 0;
-	ch->func = NULL;
-	ch->key = NULL;
-	ch->msg_size = 0;
-	ch->local_nentries = 0;
-	ch->remote_nentries = 0;
-	ch->kthreads_assigned_limit = 0;
-	ch->kthreads_idle_limit = 0;
-
-	ch->local_GP->get = 0;
-	ch->local_GP->put = 0;
-	ch->remote_GP.get = 0;
-	ch->remote_GP.put = 0;
-	ch->w_local_GP.get = 0;
-	ch->w_local_GP.put = 0;
-	ch->w_remote_GP.get = 0;
-	ch->w_remote_GP.put = 0;
-	ch->next_msg_to_pull = 0;
-
-	if (ch->flags & XPC_C_SETUP) {
-		ch->flags &= ~XPC_C_SETUP;
-
-		dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n",
-			ch->flags, ch->partid, ch->number);
-
-		kfree(ch->local_msgqueue_base);
-		ch->local_msgqueue = NULL;
-		kfree(ch->remote_msgqueue_base);
-		ch->remote_msgqueue = NULL;
-		kfree(ch->notify_queue);
-		ch->notify_queue = NULL;
-	}
-}
-
-/*
  * spin_lock_irqsave() is expected to be held on entry.
  */
 static void
@@ -717,9 +97,9 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 	DBUG_ON((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
 		!(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE));
 
-	if (part->act_state == XPC_P_DEACTIVATING) {
+	if (part->act_state == XPC_P_AS_DEACTIVATING) {
 		/* can't proceed until the other side disengages from us */
-		if (xpc_partition_engaged(1UL << ch->partid))
+		if (xpc_partition_engaged(ch->partid))
 			return;
 
 	} else {
@@ -731,7 +111,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 		if (!(ch->flags & XPC_C_CLOSEREPLY)) {
 			ch->flags |= XPC_C_CLOSEREPLY;
-			xpc_IPI_send_closereply(ch, irq_flags);
+			xpc_send_chctl_closereply(ch, irq_flags);
 		}
 
 		if (!(ch->flags & XPC_C_RCLOSEREPLY))
@@ -740,8 +120,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	/* wake those waiting for notify completion */
 	if (atomic_read(&ch->n_to_notify) > 0) {
-		/* >>> we do callout while holding ch->lock */
-		xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put);
+		/* we do callout while holding ch->lock, callout can't block */
+		xpc_notify_senders_of_disconnect(ch);
 	}
 
 	/* both sides are disconnected now */
@@ -752,10 +132,24 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 		spin_lock_irqsave(&ch->lock, *irq_flags);
 	}
 
+	DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
+
 	/* it's now safe to free the channel's message queues */
-	xpc_free_msgqueues(ch);
+	xpc_teardown_msg_structures(ch);
 
-	/* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */
+	ch->func = NULL;
+	ch->key = NULL;
+	ch->entry_size = 0;
+	ch->local_nentries = 0;
+	ch->remote_nentries = 0;
+	ch->kthreads_assigned_limit = 0;
+	ch->kthreads_idle_limit = 0;
+
+	/*
+	 * Mark the channel disconnected and clear all other flags, including
+	 * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but
+	 * not including XPC_C_WDISCONNECT (if it was set).
+	 */
 	ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
 
 	atomic_dec(&part->nchannels_active);
@@ -768,15 +162,15 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 	if (ch->flags & XPC_C_WDISCONNECT) {
 		/* we won't lose the CPU since we're holding ch->lock */
 		complete(&ch->wdisconnect_wait);
-	} else if (ch->delayed_IPI_flags) {
-		if (part->act_state != XPC_P_DEACTIVATING) {
-			/* time to take action on any delayed IPI flags */
-			spin_lock(&part->IPI_lock);
-			XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number,
-					  ch->delayed_IPI_flags);
-			spin_unlock(&part->IPI_lock);
+	} else if (ch->delayed_chctl_flags) {
+		if (part->act_state != XPC_P_AS_DEACTIVATING) {
+			/* time to take action on any delayed chctl flags */
+			spin_lock(&part->chctl_lock);
+			part->chctl.flags[ch->number] |=
+			    ch->delayed_chctl_flags;
+			spin_unlock(&part->chctl_lock);
 		}
-		ch->delayed_IPI_flags = 0;
+		ch->delayed_chctl_flags = 0;
 	}
 }
 
@@ -784,8 +178,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
  * Process a change in the channel's remote connection state.
  */
 static void
-xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
-			  u8 IPI_flags)
+xpc_process_openclose_chctl_flags(struct xpc_partition *part, int ch_number,
+				  u8 chctl_flags)
 {
 	unsigned long irq_flags;
 	struct xpc_openclose_args *args =
@@ -800,24 +194,24 @@ again:
 	if ((ch->flags & XPC_C_DISCONNECTED) &&
 	    (ch->flags & XPC_C_WDISCONNECT)) {
 		/*
-		 * Delay processing IPI flags until thread waiting disconnect
+		 * Delay processing chctl flags until thread waiting disconnect
 		 * has had a chance to see that the channel is disconnected.
 		 */
-		ch->delayed_IPI_flags |= IPI_flags;
+		ch->delayed_chctl_flags |= chctl_flags;
 		spin_unlock_irqrestore(&ch->lock, irq_flags);
 		return;
 	}
 
-	if (IPI_flags & XPC_IPI_CLOSEREQUEST) {
+	if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_CLOSEREQUEST (reason=%d) received "
+		dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREQUEST (reason=%d) received "
 			"from partid=%d, channel=%d\n", args->reason,
 			ch->partid, ch->number);
 
 		/*
 		 * If RCLOSEREQUEST is set, we're probably waiting for
 		 * RCLOSEREPLY. We should find it and a ROPENREQUEST packed
-		 * with this RCLOSEREQUEST in the IPI_flags.
+		 * with this RCLOSEREQUEST in the chctl_flags.
 		 */
 
 		if (ch->flags & XPC_C_RCLOSEREQUEST) {
@@ -826,8 +220,8 @@ again:
 			DBUG_ON(!(ch->flags & XPC_C_CLOSEREPLY));
 			DBUG_ON(ch->flags & XPC_C_RCLOSEREPLY);
 
-			DBUG_ON(!(IPI_flags & XPC_IPI_CLOSEREPLY));
-			IPI_flags &= ~XPC_IPI_CLOSEREPLY;
+			DBUG_ON(!(chctl_flags & XPC_CHCTL_CLOSEREPLY));
+			chctl_flags &= ~XPC_CHCTL_CLOSEREPLY;
 			ch->flags |= XPC_C_RCLOSEREPLY;
 
 			/* both sides have finished disconnecting */
@@ -837,17 +231,15 @@ again:
 		}
 
 		if (ch->flags & XPC_C_DISCONNECTED) {
-			if (!(IPI_flags & XPC_IPI_OPENREQUEST)) {
-				if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo,
-						       ch_number) &
-				     XPC_IPI_OPENREQUEST)) {
-
-					DBUG_ON(ch->delayed_IPI_flags != 0);
-					spin_lock(&part->IPI_lock);
-					XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-							  ch_number,
-							  XPC_IPI_CLOSEREQUEST);
-					spin_unlock(&part->IPI_lock);
+			if (!(chctl_flags & XPC_CHCTL_OPENREQUEST)) {
+				if (part->chctl.flags[ch_number] &
+				    XPC_CHCTL_OPENREQUEST) {
+
+					DBUG_ON(ch->delayed_chctl_flags != 0);
+					spin_lock(&part->chctl_lock);
+					part->chctl.flags[ch_number] |=
+					    XPC_CHCTL_CLOSEREQUEST;
+					spin_unlock(&part->chctl_lock);
 				}
 				spin_unlock_irqrestore(&ch->lock, irq_flags);
 				return;
@@ -860,7 +252,7 @@ again:
 			ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST);
 		}
 
-		IPI_flags &= ~(XPC_IPI_OPENREQUEST | XPC_IPI_OPENREPLY);
+		chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY);
 
 		/*
 		 * The meaningful CLOSEREQUEST connection state fields are:
@@ -878,7 +270,7 @@ again:
 
 			XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
 
-			DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY);
+			DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY);
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -886,13 +278,13 @@ again:
 		xpc_process_disconnect(ch, &irq_flags);
 	}
 
-	if (IPI_flags & XPC_IPI_CLOSEREPLY) {
+	if (chctl_flags & XPC_CHCTL_CLOSEREPLY) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_CLOSEREPLY received from partid=%d,"
-			" channel=%d\n", ch->partid, ch->number);
+		dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREPLY received from partid="
+			"%d, channel=%d\n", ch->partid, ch->number);
 
 		if (ch->flags & XPC_C_DISCONNECTED) {
-			DBUG_ON(part->act_state != XPC_P_DEACTIVATING);
+			DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING);
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -900,15 +292,14 @@ again:
 		DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
 
 		if (!(ch->flags & XPC_C_RCLOSEREQUEST)) {
-			if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number)
-			     & XPC_IPI_CLOSEREQUEST)) {
-
-				DBUG_ON(ch->delayed_IPI_flags != 0);
-				spin_lock(&part->IPI_lock);
-				XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-						  ch_number,
-						  XPC_IPI_CLOSEREPLY);
-				spin_unlock(&part->IPI_lock);
+			if (part->chctl.flags[ch_number] &
+			    XPC_CHCTL_CLOSEREQUEST) {
+
+				DBUG_ON(ch->delayed_chctl_flags != 0);
+				spin_lock(&part->chctl_lock);
+				part->chctl.flags[ch_number] |=
+				    XPC_CHCTL_CLOSEREPLY;
+				spin_unlock(&part->chctl_lock);
 			}
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
@@ -922,21 +313,21 @@ again:
 		}
 	}
 
-	if (IPI_flags & XPC_IPI_OPENREQUEST) {
+	if (chctl_flags & XPC_CHCTL_OPENREQUEST) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_OPENREQUEST (msg_size=%d, "
+		dev_dbg(xpc_chan, "XPC_CHCTL_OPENREQUEST (entry_size=%d, "
 			"local_nentries=%d) received from partid=%d, "
-			"channel=%d\n", args->msg_size, args->local_nentries,
+			"channel=%d\n", args->entry_size, args->local_nentries,
 			ch->partid, ch->number);
 
-		if (part->act_state == XPC_P_DEACTIVATING ||
+		if (part->act_state == XPC_P_AS_DEACTIVATING ||
 		    (ch->flags & XPC_C_ROPENREQUEST)) {
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
 
 		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
-			ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST;
+			ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST;
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -947,10 +338,10 @@ again:
 
 		/*
 		 * The meaningful OPENREQUEST connection state fields are:
-		 *      msg_size = size of channel's messages in bytes
+		 *      entry_size = size of channel's messages in bytes
 		 *      local_nentries = remote partition's local_nentries
 		 */
-		if (args->msg_size == 0 || args->local_nentries == 0) {
+		if (args->entry_size == 0 || args->local_nentries == 0) {
 			/* assume OPENREQUEST was delayed by mistake */
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
@@ -960,14 +351,14 @@ again:
 		ch->remote_nentries = args->local_nentries;
 
 		if (ch->flags & XPC_C_OPENREQUEST) {
-			if (args->msg_size != ch->msg_size) {
+			if (args->entry_size != ch->entry_size) {
 				XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
 						       &irq_flags);
 				spin_unlock_irqrestore(&ch->lock, irq_flags);
 				return;
 			}
 		} else {
-			ch->msg_size = args->msg_size;
+			ch->entry_size = args->entry_size;
 
 			XPC_SET_REASON(ch, 0, 0);
 			ch->flags &= ~XPC_C_DISCONNECTED;
@@ -978,13 +369,13 @@ again:
 		xpc_process_connect(ch, &irq_flags);
 	}
 
-	if (IPI_flags & XPC_IPI_OPENREPLY) {
+	if (chctl_flags & XPC_CHCTL_OPENREPLY) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY (local_msgqueue_pa=0x%lx, "
-			"local_nentries=%d, remote_nentries=%d) received from "
-			"partid=%d, channel=%d\n", args->local_msgqueue_pa,
-			args->local_nentries, args->remote_nentries,
-			ch->partid, ch->number);
+		dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY (local_msgqueue_pa="
+			"0x%lx, local_nentries=%d, remote_nentries=%d) "
+			"received from partid=%d, channel=%d\n",
+			args->local_msgqueue_pa, args->local_nentries,
+			args->remote_nentries, ch->partid, ch->number);
 
 		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) {
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1012,10 +403,10 @@ again:
 		DBUG_ON(args->remote_nentries == 0);
 
 		ch->flags |= XPC_C_ROPENREPLY;
-		ch->remote_msgqueue_pa = args->local_msgqueue_pa;
+		xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
 
 		if (args->local_nentries < ch->remote_nentries) {
-			dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new "
+			dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new "
 				"remote_nentries=%d, old remote_nentries=%d, "
 				"partid=%d, channel=%d\n",
 				args->local_nentries, ch->remote_nentries,
@@ -1024,7 +415,7 @@ again:
 			ch->remote_nentries = args->local_nentries;
 		}
 		if (args->remote_nentries < ch->local_nentries) {
-			dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new "
+			dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new "
 				"local_nentries=%d, old local_nentries=%d, "
 				"partid=%d, channel=%d\n",
 				args->remote_nentries, ch->local_nentries,
@@ -1082,7 +473,7 @@ xpc_connect_channel(struct xpc_channel *ch)
 	ch->local_nentries = registration->nentries;
 
 	if (ch->flags & XPC_C_ROPENREQUEST) {
-		if (registration->msg_size != ch->msg_size) {
+		if (registration->entry_size != ch->entry_size) {
 			/* the local and remote sides aren't the same */
 
 			/*
@@ -1101,7 +492,7 @@ xpc_connect_channel(struct xpc_channel *ch)
 			return xpUnequalMsgSizes;
 		}
 	} else {
-		ch->msg_size = registration->msg_size;
+		ch->entry_size = registration->entry_size;
 
 		XPC_SET_REASON(ch, 0, 0);
 		ch->flags &= ~XPC_C_DISCONNECTED;
@@ -1114,7 +505,7 @@ xpc_connect_channel(struct xpc_channel *ch)
 	/* initiate the connection */
 
 	ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING);
-	xpc_IPI_send_openrequest(ch, &irq_flags);
+	xpc_send_chctl_openrequest(ch, &irq_flags);
 
 	xpc_process_connect(ch, &irq_flags);
 
@@ -1123,152 +514,16 @@ xpc_connect_channel(struct xpc_channel *ch)
 	return xpSuccess;
 }
 
-/*
- * Clear some of the msg flags in the local message queue.
- */
-static inline void
-xpc_clear_local_msgqueue_flags(struct xpc_channel *ch)
-{
-	struct xpc_msg *msg;
-	s64 get;
-
-	get = ch->w_remote_GP.get;
-	do {
-		msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-					 (get % ch->local_nentries) *
-					 ch->msg_size);
-		msg->flags = 0;
-	} while (++get < ch->remote_GP.get);
-}
-
-/*
- * Clear some of the msg flags in the remote message queue.
- */
-static inline void
-xpc_clear_remote_msgqueue_flags(struct xpc_channel *ch)
-{
-	struct xpc_msg *msg;
-	s64 put;
-
-	put = ch->w_remote_GP.put;
-	do {
-		msg = (struct xpc_msg *)((u64)ch->remote_msgqueue +
-					 (put % ch->remote_nentries) *
-					 ch->msg_size);
-		msg->flags = 0;
-	} while (++put < ch->remote_GP.put);
-}
-
-static void
-xpc_process_msg_IPI(struct xpc_partition *part, int ch_number)
-{
-	struct xpc_channel *ch = &part->channels[ch_number];
-	int nmsgs_sent;
-
-	ch->remote_GP = part->remote_GPs[ch_number];
-
-	/* See what, if anything, has changed for each connected channel */
-
-	xpc_msgqueue_ref(ch);
-
-	if (ch->w_remote_GP.get == ch->remote_GP.get &&
-	    ch->w_remote_GP.put == ch->remote_GP.put) {
-		/* nothing changed since GPs were last pulled */
-		xpc_msgqueue_deref(ch);
-		return;
-	}
-
-	if (!(ch->flags & XPC_C_CONNECTED)) {
-		xpc_msgqueue_deref(ch);
-		return;
-	}
-
-	/*
-	 * First check to see if messages recently sent by us have been
-	 * received by the other side. (The remote GET value will have
-	 * changed since we last looked at it.)
-	 */
-
-	if (ch->w_remote_GP.get != ch->remote_GP.get) {
-
-		/*
-		 * We need to notify any senders that want to be notified
-		 * that their sent messages have been received by their
-		 * intended recipients. We need to do this before updating
-		 * w_remote_GP.get so that we don't allocate the same message
-		 * queue entries prematurely (see xpc_allocate_msg()).
-		 */
-		if (atomic_read(&ch->n_to_notify) > 0) {
-			/*
-			 * Notify senders that messages sent have been
-			 * received and delivered by the other side.
-			 */
-			xpc_notify_senders(ch, xpMsgDelivered,
-					   ch->remote_GP.get);
-		}
-
-		/*
-		 * Clear msg->flags in previously sent messages, so that
-		 * they're ready for xpc_allocate_msg().
-		 */
-		xpc_clear_local_msgqueue_flags(ch);
-
-		ch->w_remote_GP.get = ch->remote_GP.get;
-
-		dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
-			"channel=%d\n", ch->w_remote_GP.get, ch->partid,
-			ch->number);
-
-		/*
-		 * If anyone was waiting for message queue entries to become
-		 * available, wake them up.
-		 */
-		if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
-			wake_up(&ch->msg_allocate_wq);
-	}
-
-	/*
-	 * Now check for newly sent messages by the other side. (The remote
-	 * PUT value will have changed since we last looked at it.)
-	 */
-
-	if (ch->w_remote_GP.put != ch->remote_GP.put) {
-		/*
-		 * Clear msg->flags in previously received messages, so that
-		 * they're ready for xpc_get_deliverable_msg().
-		 */
-		xpc_clear_remote_msgqueue_flags(ch);
-
-		ch->w_remote_GP.put = ch->remote_GP.put;
-
-		dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
-			"channel=%d\n", ch->w_remote_GP.put, ch->partid,
-			ch->number);
-
-		nmsgs_sent = ch->w_remote_GP.put - ch->w_local_GP.get;
-		if (nmsgs_sent > 0) {
-			dev_dbg(xpc_chan, "msgs waiting to be copied and "
-				"delivered=%d, partid=%d, channel=%d\n",
-				nmsgs_sent, ch->partid, ch->number);
-
-			if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)
-				xpc_activate_kthreads(ch, nmsgs_sent);
-		}
-	}
-
-	xpc_msgqueue_deref(ch);
-}
-
 void
-xpc_process_channel_activity(struct xpc_partition *part)
+xpc_process_sent_chctl_flags(struct xpc_partition *part)
 {
 	unsigned long irq_flags;
-	u64 IPI_amo, IPI_flags;
+	union xpc_channel_ctl_flags chctl;
 	struct xpc_channel *ch;
 	int ch_number;
 	u32 ch_flags;
 
-	IPI_amo = xpc_get_IPI_flags(part);
+	chctl.all_flags = xpc_get_chctl_all_flags(part);
 
 	/*
 	 * Initiate channel connections for registered channels.
@@ -1281,14 +536,14 @@ xpc_process_channel_activity(struct xpc_partition *part)
 		ch = &part->channels[ch_number];
 
 		/*
-		 * Process any open or close related IPI flags, and then deal
+		 * Process any open or close related chctl flags, and then deal
 		 * with connecting or disconnecting the channel as required.
 		 */
 
-		IPI_flags = XPC_GET_IPI_FLAGS(IPI_amo, ch_number);
-
-		if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_flags))
-			xpc_process_openclose_IPI(part, ch_number, IPI_flags);
+		if (chctl.flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS) {
+			xpc_process_openclose_chctl_flags(part, ch_number,
+							chctl.flags[ch_number]);
+		}
 
 		ch_flags = ch->flags;	/* need an atomic snapshot of flags */
 
@@ -1299,7 +554,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
 			continue;
 		}
 
-		if (part->act_state == XPC_P_DEACTIVATING)
+		if (part->act_state == XPC_P_AS_DEACTIVATING)
 			continue;
 
 		if (!(ch_flags & XPC_C_CONNECTED)) {
@@ -1315,13 +570,13 @@ xpc_process_channel_activity(struct xpc_partition *part)
 		}
 
 		/*
-		 * Process any message related IPI flags, this may involve the
-		 * activation of kthreads to deliver any pending messages sent
-		 * from the other partition.
+		 * Process any message related chctl flags, this may involve
+		 * the activation of kthreads to deliver any pending messages
+		 * sent from the other partition.
 		 */
 
-		if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_flags))
-			xpc_process_msg_IPI(part, ch_number);
+		if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
+			xpc_process_msg_chctl_flags(part, ch_number);
 	}
 }
 
@@ -1369,59 +624,6 @@ xpc_partition_going_down(struct xpc_partition *part, enum xp_retval reason)
 }
 
 /*
- * Teardown the infrastructure necessary to support XPartition Communication
- * between the specified remote partition and the local one.
- */
-void
-xpc_teardown_infrastructure(struct xpc_partition *part)
-{
-	short partid = XPC_PARTID(part);
-
-	/*
-	 * We start off by making this partition inaccessible to local
-	 * processes by marking it as no longer setup. Then we make it
-	 * inaccessible to remote processes by clearing the XPC per partition
-	 * specific variable's magic # (which indicates that these variables
-	 * are no longer valid) and by ignoring all XPC notify IPIs sent to
-	 * this partition.
-	 */
-
-	DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
-	DBUG_ON(atomic_read(&part->nchannels_active) != 0);
-	DBUG_ON(part->setup_state != XPC_P_SETUP);
-	part->setup_state = XPC_P_WTEARDOWN;
-
-	xpc_vars_part[partid].magic = 0;
-
-	free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid);
-
-	/*
-	 * Before proceeding with the teardown we have to wait until all
-	 * existing references cease.
-	 */
-	wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
-
-	/* now we can begin tearing down the infrastructure */
-
-	part->setup_state = XPC_P_TORNDOWN;
-
-	/* in case we've still got outstanding timers registered... */
-	del_timer_sync(&part->dropped_IPI_timer);
-
-	kfree(part->remote_openclose_args_base);
-	part->remote_openclose_args = NULL;
-	kfree(part->local_openclose_args_base);
-	part->local_openclose_args = NULL;
-	kfree(part->remote_GPs_base);
-	part->remote_GPs = NULL;
-	kfree(part->local_GPs_base);
-	part->local_GPs = NULL;
-	kfree(part->channels);
-	part->channels = NULL;
-	part->local_IPI_amo_va = NULL;
-}
-
-/*
  * Called by XP at the time of channel connection registration to cause
  * XPC to establish connections to all currently active partitions.
  */
@@ -1432,9 +634,9 @@ xpc_initiate_connect(int ch_number)
 	struct xpc_partition *part;
 	struct xpc_channel *ch;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
 		if (xpc_part_ref(part)) {
@@ -1488,10 +690,10 @@ xpc_initiate_disconnect(int ch_number)
 	struct xpc_partition *part;
 	struct xpc_channel *ch;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
 	/* initiate the channel disconnect for every active partition */
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
 		if (xpc_part_ref(part)) {
@@ -1550,7 +752,7 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch,
 		       XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
 		       XPC_C_CONNECTING | XPC_C_CONNECTED);
 
-	xpc_IPI_send_closerequest(ch, irq_flags);
+	xpc_send_chctl_closerequest(ch, irq_flags);
 
 	if (channel_was_connected)
 		ch->flags |= XPC_C_WASCONNECTED;
@@ -1598,7 +800,7 @@ xpc_disconnect_callout(struct xpc_channel *ch, enum xp_retval reason)
  * Wait for a message entry to become available for the specified channel,
  * but don't wait any longer than 1 jiffy.
  */
-static enum xp_retval
+enum xp_retval
 xpc_allocate_msg_wait(struct xpc_channel *ch)
 {
 	enum xp_retval ret;
@@ -1625,315 +827,54 @@ xpc_allocate_msg_wait(struct xpc_channel *ch)
 }
 
 /*
- * Allocate an entry for a message from the message queue associated with the
- * specified channel.
- */
-static enum xp_retval
-xpc_allocate_msg(struct xpc_channel *ch, u32 flags,
-		 struct xpc_msg **address_of_msg)
-{
-	struct xpc_msg *msg;
-	enum xp_retval ret;
-	s64 put;
-
-	/* this reference will be dropped in xpc_send_msg() */
-	xpc_msgqueue_ref(ch);
-
-	if (ch->flags & XPC_C_DISCONNECTING) {
-		xpc_msgqueue_deref(ch);
-		return ch->reason;
-	}
-	if (!(ch->flags & XPC_C_CONNECTED)) {
-		xpc_msgqueue_deref(ch);
-		return xpNotConnected;
-	}
-
-	/*
-	 * Get the next available message entry from the local message queue.
-	 * If none are available, we'll make sure that we grab the latest
-	 * GP values.
-	 */
-	ret = xpTimeout;
-
-	while (1) {
-
-		put = ch->w_local_GP.put;
-		rmb();	/* guarantee that .put loads before .get */
-		if (put - ch->w_remote_GP.get < ch->local_nentries) {
-
-			/* There are available message entries. We need to try
-			 * to secure one for ourselves. We'll do this by trying
-			 * to increment w_local_GP.put as long as someone else
-			 * doesn't beat us to it. If they do, we'll have to
-			 * try again.
-			 */
-			if (cmpxchg(&ch->w_local_GP.put, put, put + 1) == put) {
-				/* we got the entry referenced by put */
-				break;
-			}
-			continue;	/* try again */
-		}
-
-		/*
-		 * There aren't any available msg entries at this time.
-		 *
-		 * In waiting for a message entry to become available,
-		 * we set a timeout in case the other side is not
-		 * sending completion IPIs. This lets us fake an IPI
-		 * that will cause the IPI handler to fetch the latest
-		 * GP values as if an IPI was sent by the other side.
-		 */
-		if (ret == xpTimeout)
-			xpc_IPI_send_local_msgrequest(ch);
-
-		if (flags & XPC_NOWAIT) {
-			xpc_msgqueue_deref(ch);
-			return xpNoWait;
-		}
-
-		ret = xpc_allocate_msg_wait(ch);
-		if (ret != xpInterrupted && ret != xpTimeout) {
-			xpc_msgqueue_deref(ch);
-			return ret;
-		}
-	}
-
-	/* get the message's address and initialize it */
-	msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-				 (put % ch->local_nentries) * ch->msg_size);
-
-	DBUG_ON(msg->flags != 0);
-	msg->number = put;
-
-	dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
-		"msg_number=%ld, partid=%d, channel=%d\n", put + 1,
-		(void *)msg, msg->number, ch->partid, ch->number);
-
-	*address_of_msg = msg;
-
-	return xpSuccess;
-}
-
-/*
- * Allocate an entry for a message from the message queue associated with the
- * specified channel. NOTE that this routine can sleep waiting for a message
- * entry to become available. To not sleep, pass in the XPC_NOWAIT flag.
+ * Send a message that contains the user's payload on the specified channel
+ * connected to the specified partition.
  *
- * Arguments:
+ * NOTE that this routine can sleep waiting for a message entry to become
+ * available. To not sleep, pass in the XPC_NOWAIT flag.
  *
- *	partid - ID of partition to which the channel is connected.
- *	ch_number - channel #.
- *	flags - see xpc.h for valid flags.
- *	payload - address of the allocated payload area pointer (filled in on
- * 	          return) in which the user-defined message is constructed.
- */
-enum xp_retval
-xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload)
-{
-	struct xpc_partition *part = &xpc_partitions[partid];
-	enum xp_retval ret = xpUnknownReason;
-	struct xpc_msg *msg = NULL;
-
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
-	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-
-	*payload = NULL;
-
-	if (xpc_part_ref(part)) {
-		ret = xpc_allocate_msg(&part->channels[ch_number], flags, &msg);
-		xpc_part_deref(part);
-
-		if (msg != NULL)
-			*payload = &msg->payload;
-	}
-
-	return ret;
-}
-
-/*
- * Now we actually send the messages that are ready to be sent by advancing
- * the local message queue's Put value and then send an IPI to the recipient
- * partition.
- */
-static void
-xpc_send_msgs(struct xpc_channel *ch, s64 initial_put)
-{
-	struct xpc_msg *msg;
-	s64 put = initial_put + 1;
-	int send_IPI = 0;
-
-	while (1) {
-
-		while (1) {
-			if (put == ch->w_local_GP.put)
-				break;
-
-			msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-						 (put % ch->local_nentries) *
-						 ch->msg_size);
-
-			if (!(msg->flags & XPC_M_READY))
-				break;
-
-			put++;
-		}
-
-		if (put == initial_put) {
-			/* nothing's changed */
-			break;
-		}
-
-		if (cmpxchg_rel(&ch->local_GP->put, initial_put, put) !=
-		    initial_put) {
-			/* someone else beat us to it */
-			DBUG_ON(ch->local_GP->put < initial_put);
-			break;
-		}
-
-		/* we just set the new value of local_GP->put */
-
-		dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
-			"channel=%d\n", put, ch->partid, ch->number);
-
-		send_IPI = 1;
-
-		/*
-		 * We need to ensure that the message referenced by
-		 * local_GP->put is not XPC_M_READY or that local_GP->put
-		 * equals w_local_GP.put, so we'll go have a look.
-		 */
-		initial_put = put;
-	}
-
-	if (send_IPI)
-		xpc_IPI_send_msgrequest(ch);
-}
-
-/*
- * Common code that does the actual sending of the message by advancing the
- * local message queue's Put value and sends an IPI to the partition the
- * message is being sent to.
- */
-static enum xp_retval
-xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
-	     xpc_notify_func func, void *key)
-{
-	enum xp_retval ret = xpSuccess;
-	struct xpc_notify *notify = notify;
-	s64 put, msg_number = msg->number;
-
-	DBUG_ON(notify_type == XPC_N_CALL && func == NULL);
-	DBUG_ON((((u64)msg - (u64)ch->local_msgqueue) / ch->msg_size) !=
-		msg_number % ch->local_nentries);
-	DBUG_ON(msg->flags & XPC_M_READY);
-
-	if (ch->flags & XPC_C_DISCONNECTING) {
-		/* drop the reference grabbed in xpc_allocate_msg() */
-		xpc_msgqueue_deref(ch);
-		return ch->reason;
-	}
-
-	if (notify_type != 0) {
-		/*
-		 * Tell the remote side to send an ACK interrupt when the
-		 * message has been delivered.
-		 */
-		msg->flags |= XPC_M_INTERRUPT;
-
-		atomic_inc(&ch->n_to_notify);
-
-		notify = &ch->notify_queue[msg_number % ch->local_nentries];
-		notify->func = func;
-		notify->key = key;
-		notify->type = notify_type;
-
-		/* >>> is a mb() needed here? */
-
-		if (ch->flags & XPC_C_DISCONNECTING) {
-			/*
-			 * An error occurred between our last error check and
-			 * this one. We will try to clear the type field from
-			 * the notify entry. If we succeed then
-			 * xpc_disconnect_channel() didn't already process
-			 * the notify entry.
-			 */
-			if (cmpxchg(&notify->type, notify_type, 0) ==
-			    notify_type) {
-				atomic_dec(&ch->n_to_notify);
-				ret = ch->reason;
-			}
-
-			/* drop the reference grabbed in xpc_allocate_msg() */
-			xpc_msgqueue_deref(ch);
-			return ret;
-		}
-	}
-
-	msg->flags |= XPC_M_READY;
-
-	/*
-	 * The preceding store of msg->flags must occur before the following
-	 * load of ch->local_GP->put.
-	 */
-	mb();
-
-	/* see if the message is next in line to be sent, if so send it */
-
-	put = ch->local_GP->put;
-	if (put == msg_number)
-		xpc_send_msgs(ch, put);
-
-	/* drop the reference grabbed in xpc_allocate_msg() */
-	xpc_msgqueue_deref(ch);
-	return ret;
-}
-
-/*
- * Send a message previously allocated using xpc_initiate_allocate() on the
- * specified channel connected to the specified partition.
- *
- * This routine will not wait for the message to be received, nor will
- * notification be given when it does happen. Once this routine has returned
- * the message entry allocated via xpc_initiate_allocate() is no longer
- * accessable to the caller.
- *
- * This routine, although called by users, does not call xpc_part_ref() to
- * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg().
+ * Once sent, this routine will not wait for the message to be received, nor
+ * will notification be given when it does happen.
  *
  * Arguments:
  *
  *	partid - ID of partition to which the channel is connected.
  *	ch_number - channel # to send message on.
- *	payload - pointer to the payload area allocated via
- *			xpc_initiate_allocate().
+ *	flags - see xp.h for valid flags.
+ *	payload - pointer to the payload which is to be sent.
+ *	payload_size - size of the payload in bytes.
  */
 enum xp_retval
-xpc_initiate_send(short partid, int ch_number, void *payload)
+xpc_initiate_send(short partid, int ch_number, u32 flags, void *payload,
+		  u16 payload_size)
 {
 	struct xpc_partition *part = &xpc_partitions[partid];
-	struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-	enum xp_retval ret;
+	enum xp_retval ret = xpUnknownReason;
 
-	dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
+	dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload,
 		partid, ch_number);
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-	DBUG_ON(msg == NULL);
+	DBUG_ON(payload == NULL);
 
-	ret = xpc_send_msg(&part->channels[ch_number], msg, 0, NULL, NULL);
+	if (xpc_part_ref(part)) {
+		ret = xpc_send_payload(&part->channels[ch_number], flags,
+				       payload, payload_size, 0, NULL, NULL);
+		xpc_part_deref(part);
+	}
 
 	return ret;
 }
 
 /*
- * Send a message previously allocated using xpc_initiate_allocate on the
- * specified channel connected to the specified partition.
+ * Send a message that contains the user's payload on the specified channel
+ * connected to the specified partition.
  *
- * This routine will not wait for the message to be sent. Once this routine
- * has returned the message entry allocated via xpc_initiate_allocate() is no
- * longer accessable to the caller.
+ * NOTE that this routine can sleep waiting for a message entry to become
+ * available. To not sleep, pass in the XPC_NOWAIT flag.
+ *
+ * This routine will not wait for the message to be sent or received.
  *
  * Once the remote end of the channel has received the message, the function
  * passed as an argument to xpc_initiate_send_notify() will be called. This
@@ -1943,158 +884,51 @@ xpc_initiate_send(short partid, int ch_number, void *payload)
  *
  * If this routine returns an error, the caller's function will NOT be called.
  *
- * This routine, although called by users, does not call xpc_part_ref() to
- * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg().
- *
  * Arguments:
  *
  *	partid - ID of partition to which the channel is connected.
  *	ch_number - channel # to send message on.
- *	payload - pointer to the payload area allocated via
- *			xpc_initiate_allocate().
+ *	flags - see xp.h for valid flags.
+ *	payload - pointer to the payload which is to be sent.
+ *	payload_size - size of the payload in bytes.
  *	func - function to call with asynchronous notification of message
  *		  receipt. THIS FUNCTION MUST BE NON-BLOCKING.
  *	key - user-defined key to be passed to the function when it's called.
  */
 enum xp_retval
-xpc_initiate_send_notify(short partid, int ch_number, void *payload,
-			 xpc_notify_func func, void *key)
+xpc_initiate_send_notify(short partid, int ch_number, u32 flags, void *payload,
+			 u16 payload_size, xpc_notify_func func, void *key)
 {
 	struct xpc_partition *part = &xpc_partitions[partid];
-	struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-	enum xp_retval ret;
+	enum xp_retval ret = xpUnknownReason;
 
-	dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
+	dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload,
 		partid, ch_number);
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-	DBUG_ON(msg == NULL);
+	DBUG_ON(payload == NULL);
 	DBUG_ON(func == NULL);
 
-	ret = xpc_send_msg(&part->channels[ch_number], msg, XPC_N_CALL,
-			   func, key);
-	return ret;
-}
-
-static struct xpc_msg *
-xpc_pull_remote_msg(struct xpc_channel *ch, s64 get)
-{
-	struct xpc_partition *part = &xpc_partitions[ch->partid];
-	struct xpc_msg *remote_msg, *msg;
-	u32 msg_index, nmsgs;
-	u64 msg_offset;
-	enum xp_retval ret;
-
-	if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) {
-		/* we were interrupted by a signal */
-		return NULL;
-	}
-
-	while (get >= ch->next_msg_to_pull) {
-
-		/* pull as many messages as are ready and able to be pulled */
-
-		msg_index = ch->next_msg_to_pull % ch->remote_nentries;
-
-		DBUG_ON(ch->next_msg_to_pull >= ch->w_remote_GP.put);
-		nmsgs = ch->w_remote_GP.put - ch->next_msg_to_pull;
-		if (msg_index + nmsgs > ch->remote_nentries) {
-			/* ignore the ones that wrap the msg queue for now */
-			nmsgs = ch->remote_nentries - msg_index;
-		}
-
-		msg_offset = msg_index * ch->msg_size;
-		msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset);
-		remote_msg = (struct xpc_msg *)(ch->remote_msgqueue_pa +
-						msg_offset);
-
-		ret = xpc_pull_remote_cachelines(part, msg, remote_msg,
-						 nmsgs * ch->msg_size);
-		if (ret != xpSuccess) {
-
-			dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
-				" msg %ld from partition %d, channel=%d, "
-				"ret=%d\n", nmsgs, ch->next_msg_to_pull,
-				ch->partid, ch->number, ret);
-
-			XPC_DEACTIVATE_PARTITION(part, ret);
-
-			mutex_unlock(&ch->msg_to_pull_mutex);
-			return NULL;
-		}
-
-		ch->next_msg_to_pull += nmsgs;
+	if (xpc_part_ref(part)) {
+		ret = xpc_send_payload(&part->channels[ch_number], flags,
+				       payload, payload_size, XPC_N_CALL, func,
+				       key);
+		xpc_part_deref(part);
 	}
-
-	mutex_unlock(&ch->msg_to_pull_mutex);
-
-	/* return the message we were looking for */
-	msg_offset = (get % ch->remote_nentries) * ch->msg_size;
-	msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset);
-
-	return msg;
-}
-
-/*
- * Get a message to be delivered.
- */
-static struct xpc_msg *
-xpc_get_deliverable_msg(struct xpc_channel *ch)
-{
-	struct xpc_msg *msg = NULL;
-	s64 get;
-
-	do {
-		if (ch->flags & XPC_C_DISCONNECTING)
-			break;
-
-		get = ch->w_local_GP.get;
-		rmb();	/* guarantee that .get loads before .put */
-		if (get == ch->w_remote_GP.put)
-			break;
-
-		/* There are messages waiting to be pulled and delivered.
-		 * We need to try to secure one for ourselves. We'll do this
-		 * by trying to increment w_local_GP.get and hope that no one
-		 * else beats us to it. If they do, we'll we'll simply have
-		 * to try again for the next one.
-		 */
-
-		if (cmpxchg(&ch->w_local_GP.get, get, get + 1) == get) {
-			/* we got the entry referenced by get */
-
-			dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
-				"partid=%d, channel=%d\n", get + 1,
-				ch->partid, ch->number);
-
-			/* pull the message from the remote partition */
-
-			msg = xpc_pull_remote_msg(ch, get);
-
-			DBUG_ON(msg != NULL && msg->number != get);
-			DBUG_ON(msg != NULL && (msg->flags & XPC_M_DONE));
-			DBUG_ON(msg != NULL && !(msg->flags & XPC_M_READY));
-
-			break;
-		}
-
-	} while (1);
-
-	return msg;
+	return ret;
 }
 
 /*
- * Deliver a message to its intended recipient.
+ * Deliver a message's payload to its intended recipient.
  */
 void
-xpc_deliver_msg(struct xpc_channel *ch)
+xpc_deliver_payload(struct xpc_channel *ch)
 {
-	struct xpc_msg *msg;
+	void *payload;
 
-	msg = xpc_get_deliverable_msg(ch);
-	if (msg != NULL) {
+	payload = xpc_get_deliverable_payload(ch);
+	if (payload != NULL) {
 
 		/*
 		 * This ref is taken to protect the payload itself from being
@@ -2106,18 +940,16 @@ xpc_deliver_msg(struct xpc_channel *ch)
 		atomic_inc(&ch->kthreads_active);
 
 		if (ch->func != NULL) {
-			dev_dbg(xpc_chan, "ch->func() called, msg=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *)msg, msg->number, ch->partid,
+			dev_dbg(xpc_chan, "ch->func() called, payload=0x%p "
+				"partid=%d channel=%d\n", payload, ch->partid,
 				ch->number);
 
 			/* deliver the message to its intended recipient */
-			ch->func(xpMsgReceived, ch->partid, ch->number,
-				 &msg->payload, ch->key);
+			ch->func(xpMsgReceived, ch->partid, ch->number, payload,
+				 ch->key);
 
-			dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *)msg, msg->number, ch->partid,
+			dev_dbg(xpc_chan, "ch->func() returned, payload=0x%p "
+				"partid=%d channel=%d\n", payload, ch->partid,
 				ch->number);
 		}
 
@@ -2126,118 +958,31 @@ xpc_deliver_msg(struct xpc_channel *ch)
 }
 
 /*
- * Now we actually acknowledge the messages that have been delivered and ack'd
- * by advancing the cached remote message queue's Get value and if requested
- * send an IPI to the message sender's partition.
- */
-static void
-xpc_acknowledge_msgs(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
-{
-	struct xpc_msg *msg;
-	s64 get = initial_get + 1;
-	int send_IPI = 0;
-
-	while (1) {
-
-		while (1) {
-			if (get == ch->w_local_GP.get)
-				break;
-
-			msg = (struct xpc_msg *)((u64)ch->remote_msgqueue +
-						 (get % ch->remote_nentries) *
-						 ch->msg_size);
-
-			if (!(msg->flags & XPC_M_DONE))
-				break;
-
-			msg_flags |= msg->flags;
-			get++;
-		}
-
-		if (get == initial_get) {
-			/* nothing's changed */
-			break;
-		}
-
-		if (cmpxchg_rel(&ch->local_GP->get, initial_get, get) !=
-		    initial_get) {
-			/* someone else beat us to it */
-			DBUG_ON(ch->local_GP->get <= initial_get);
-			break;
-		}
-
-		/* we just set the new value of local_GP->get */
-
-		dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
-			"channel=%d\n", get, ch->partid, ch->number);
-
-		send_IPI = (msg_flags & XPC_M_INTERRUPT);
-
-		/*
-		 * We need to ensure that the message referenced by
-		 * local_GP->get is not XPC_M_DONE or that local_GP->get
-		 * equals w_local_GP.get, so we'll go have a look.
-		 */
-		initial_get = get;
-	}
-
-	if (send_IPI)
-		xpc_IPI_send_msgrequest(ch);
-}
-
-/*
- * Acknowledge receipt of a delivered message.
- *
- * If a message has XPC_M_INTERRUPT set, send an interrupt to the partition
- * that sent the message.
+ * Acknowledge receipt of a delivered message's payload.
  *
  * This function, although called by users, does not call xpc_part_ref() to
  * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_deliver_msg().
+ * fact that we called xpc_msgqueue_ref() in xpc_deliver_payload().
  *
  * Arguments:
  *
  *	partid - ID of partition to which the channel is connected.
  *	ch_number - channel # message received on.
  *	payload - pointer to the payload area allocated via
- *			xpc_initiate_allocate().
+ *			xpc_initiate_send() or xpc_initiate_send_notify().
  */
 void
 xpc_initiate_received(short partid, int ch_number, void *payload)
 {
 	struct xpc_partition *part = &xpc_partitions[partid];
 	struct xpc_channel *ch;
-	struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-	s64 get, msg_number = msg->number;
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
 
 	ch = &part->channels[ch_number];
+	xpc_received_payload(ch, payload);
 
-	dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
-		(void *)msg, msg_number, ch->partid, ch->number);
-
-	DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->msg_size) !=
-		msg_number % ch->remote_nentries);
-	DBUG_ON(msg->flags & XPC_M_DONE);
-
-	msg->flags |= XPC_M_DONE;
-
-	/*
-	 * The preceding store of msg->flags must occur before the following
-	 * load of ch->local_GP->get.
-	 */
-	mb();
-
-	/*
-	 * See if this message is next in line to be acknowledged as having
-	 * been delivered.
-	 */
-	get = ch->local_GP->get;
-	if (get == msg_number)
-		xpc_acknowledge_msgs(ch, get, msg->flags);
-
-	/* the call to xpc_msgqueue_ref() was done by xpc_deliver_msg()  */
+	/* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload()  */
 	xpc_msgqueue_deref(ch);
 }
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index c3b4227f48a..46325fc8481 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -25,37 +25,31 @@
  *
  *	Caveats:
  *
- *	  . We currently have no way to determine which nasid an IPI came
- *	    from. Thus, xpc_IPI_send() does a remote AMO write followed by
- *	    an IPI. The AMO indicates where data is to be pulled from, so
- *	    after the IPI arrives, the remote partition checks the AMO word.
- *	    The IPI can actually arrive before the AMO however, so other code
- *	    must periodically check for this case. Also, remote AMO operations
- *	    do not reliably time out. Thus we do a remote PIO read solely to
- *	    know whether the remote partition is down and whether we should
- *	    stop sending IPIs to it. This remote PIO read operation is set up
- *	    in a special nofault region so SAL knows to ignore (and cleanup)
- *	    any errors due to the remote AMO write, PIO read, and/or PIO
- *	    write operations.
+ *	  . Currently on sn2, we have no way to determine which nasid an IRQ
+ *	    came from. Thus, xpc_send_IRQ_sn2() does a remote amo write
+ *	    followed by an IPI. The amo indicates where data is to be pulled
+ *	    from, so after the IPI arrives, the remote partition checks the amo
+ *	    word. The IPI can actually arrive before the amo however, so other
+ *	    code must periodically check for this case. Also, remote amo
+ *	    operations do not reliably time out. Thus we do a remote PIO read
+ *	    solely to know whether the remote partition is down and whether we
+ *	    should stop sending IPIs to it. This remote PIO read operation is
+ *	    set up in a special nofault region so SAL knows to ignore (and
+ *	    cleanup) any errors due to the remote amo write, PIO read, and/or
+ *	    PIO write operations.
  *
  *	    If/when new hardware solves this IPI problem, we should abandon
  *	    the current approach.
  *
  */
 
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
-#include <linux/completion.h>
 #include <linux/kdebug.h>
 #include <linux/kthread.h>
-#include <linux/uaccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
 #include "xpc.h"
 
 /* define two XPC debug device structures to be used with dev_dbg() et al */
@@ -89,9 +83,9 @@ static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
 static int xpc_hb_check_min_interval = 10;
 static int xpc_hb_check_max_interval = 120;
 
-int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
-static int xpc_disengage_request_min_timelimit;	/* = 0 */
-static int xpc_disengage_request_max_timelimit = 120;
+int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
+static int xpc_disengage_min_timelimit;	/* = 0 */
+static int xpc_disengage_max_timelimit = 120;
 
 static ctl_table xpc_sys_xpc_hb_dir[] = {
 	{
@@ -124,14 +118,14 @@ static ctl_table xpc_sys_xpc_dir[] = {
 	 .child = xpc_sys_xpc_hb_dir},
 	{
 	 .ctl_name = CTL_UNNUMBERED,
-	 .procname = "disengage_request_timelimit",
-	 .data = &xpc_disengage_request_timelimit,
+	 .procname = "disengage_timelimit",
+	 .data = &xpc_disengage_timelimit,
 	 .maxlen = sizeof(int),
 	 .mode = 0644,
 	 .proc_handler = &proc_dointvec_minmax,
 	 .strategy = &sysctl_intvec,
-	 .extra1 = &xpc_disengage_request_min_timelimit,
-	 .extra2 = &xpc_disengage_request_max_timelimit},
+	 .extra1 = &xpc_disengage_min_timelimit,
+	 .extra2 = &xpc_disengage_max_timelimit},
 	{}
 };
 static ctl_table xpc_sys_dir[] = {
@@ -144,16 +138,19 @@ static ctl_table xpc_sys_dir[] = {
 };
 static struct ctl_table_header *xpc_sysctl;
 
-/* non-zero if any remote partition disengage request was timed out */
-int xpc_disengage_request_timedout;
+/* non-zero if any remote partition disengage was timed out */
+int xpc_disengage_timedout;
 
-/* #of IRQs received */
-static atomic_t xpc_act_IRQ_rcvd;
+/* #of activate IRQs received and not yet processed */
+int xpc_activate_IRQ_rcvd;
+DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock);
 
 /* IRQ handler notifies this wait queue on receipt of an IRQ */
-static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
+DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
 
 static unsigned long xpc_hb_check_timeout;
+static struct timer_list xpc_hb_timer;
+void *xpc_heartbeating_to_mask;
 
 /* notification that the xpc_hb_checker thread has exited */
 static DECLARE_COMPLETION(xpc_hb_checker_exited);
@@ -161,8 +158,6 @@ static DECLARE_COMPLETION(xpc_hb_checker_exited);
 /* notification that the xpc_discovery thread has exited */
 static DECLARE_COMPLETION(xpc_discovery_exited);
 
-static struct timer_list xpc_hb_timer;
-
 static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
 
 static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
@@ -175,31 +170,76 @@ static struct notifier_block xpc_die_notifier = {
 	.notifier_call = xpc_system_die,
 };
 
+int (*xpc_setup_partitions_sn) (void);
+enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
+						  unsigned long *rp_pa,
+						  size_t *len);
+int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
+void (*xpc_heartbeat_init) (void);
+void (*xpc_heartbeat_exit) (void);
+void (*xpc_increment_heartbeat) (void);
+void (*xpc_offline_heartbeat) (void);
+void (*xpc_online_heartbeat) (void);
+enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part);
+
+enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part);
+void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch);
+u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part);
+enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch);
+void (*xpc_teardown_msg_structures) (struct xpc_channel *ch);
+void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number);
+int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch);
+void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch);
+
+void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp,
+					  unsigned long remote_rp_pa,
+					  int nasid);
+void (*xpc_request_partition_reactivation) (struct xpc_partition *part);
+void (*xpc_request_partition_deactivation) (struct xpc_partition *part);
+void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part);
+
+void (*xpc_process_activate_IRQ_rcvd) (void);
+enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part);
+void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part);
+
+void (*xpc_indicate_partition_engaged) (struct xpc_partition *part);
+int (*xpc_partition_engaged) (short partid);
+int (*xpc_any_partition_engaged) (void);
+void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part);
+void (*xpc_assume_partition_disengaged) (short partid);
+
+void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch,
+				     unsigned long *irq_flags);
+void (*xpc_send_chctl_closereply) (struct xpc_channel *ch,
+				   unsigned long *irq_flags);
+void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
+				    unsigned long *irq_flags);
+void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
+				  unsigned long *irq_flags);
+
+void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
+				     unsigned long msgqueue_pa);
+
+enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags,
+				    void *payload, u16 payload_size,
+				    u8 notify_type, xpc_notify_func func,
+				    void *key);
+void (*xpc_received_payload) (struct xpc_channel *ch, void *payload);
+
 /*
- * Timer function to enforce the timelimit on the partition disengage request.
+ * Timer function to enforce the timelimit on the partition disengage.
  */
 static void
-xpc_timeout_partition_disengage_request(unsigned long data)
+xpc_timeout_partition_disengage(unsigned long data)
 {
 	struct xpc_partition *part = (struct xpc_partition *)data;
 
-	DBUG_ON(time_before(jiffies, part->disengage_request_timeout));
+	DBUG_ON(time_is_after_jiffies(part->disengage_timeout));
 
 	(void)xpc_partition_disengaged(part);
 
-	DBUG_ON(part->disengage_request_timeout != 0);
-	DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
-}
-
-/*
- * Notify the heartbeat check thread that an IRQ has been received.
- */
-static irqreturn_t
-xpc_act_IRQ_handler(int irq, void *dev_id)
-{
-	atomic_inc(&xpc_act_IRQ_rcvd);
-	wake_up_interruptible(&xpc_act_IRQ_wq);
-	return IRQ_HANDLED;
+	DBUG_ON(part->disengage_timeout != 0);
+	DBUG_ON(xpc_partition_engaged(XPC_PARTID(part)));
 }
 
 /*
@@ -210,15 +250,63 @@ xpc_act_IRQ_handler(int irq, void *dev_id)
 static void
 xpc_hb_beater(unsigned long dummy)
 {
-	xpc_vars->heartbeat++;
+	xpc_increment_heartbeat();
 
-	if (time_after_eq(jiffies, xpc_hb_check_timeout))
-		wake_up_interruptible(&xpc_act_IRQ_wq);
+	if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
+		wake_up_interruptible(&xpc_activate_IRQ_wq);
 
 	xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
 	add_timer(&xpc_hb_timer);
 }
 
+static void
+xpc_start_hb_beater(void)
+{
+	xpc_heartbeat_init();
+	init_timer(&xpc_hb_timer);
+	xpc_hb_timer.function = xpc_hb_beater;
+	xpc_hb_beater(0);
+}
+
+static void
+xpc_stop_hb_beater(void)
+{
+	del_timer_sync(&xpc_hb_timer);
+	xpc_heartbeat_exit();
+}
+
+/*
+ * At periodic intervals, scan through all active partitions and ensure
+ * their heartbeat is still active.  If not, the partition is deactivated.
+ */
+static void
+xpc_check_remote_hb(void)
+{
+	struct xpc_partition *part;
+	short partid;
+	enum xp_retval ret;
+
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
+
+		if (xpc_exiting)
+			break;
+
+		if (partid == xp_partition_id)
+			continue;
+
+		part = &xpc_partitions[partid];
+
+		if (part->act_state == XPC_P_AS_INACTIVE ||
+		    part->act_state == XPC_P_AS_DEACTIVATING) {
+			continue;
+		}
+
+		ret = xpc_get_remote_heartbeat(part);
+		if (ret != xpSuccess)
+			XPC_DEACTIVATE_PARTITION(part, ret);
+	}
+}
+
 /*
  * This thread is responsible for nearly all of the partition
  * activation/deactivation.
@@ -226,8 +314,6 @@ xpc_hb_beater(unsigned long dummy)
 static int
 xpc_hb_checker(void *ignore)
 {
-	int last_IRQ_count = 0;
-	int new_IRQ_count;
 	int force_IRQ = 0;
 
 	/* this thread was marked active by xpc_hb_init() */
@@ -236,56 +322,49 @@ xpc_hb_checker(void *ignore)
 
 	/* set our heartbeating to other partitions into motion */
 	xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
-	xpc_hb_beater(0);
+	xpc_start_hb_beater();
 
 	while (!xpc_exiting) {
 
 		dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
 			"been received\n",
 			(int)(xpc_hb_check_timeout - jiffies),
-			atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count);
+			xpc_activate_IRQ_rcvd);
 
 		/* checking of remote heartbeats is skewed by IRQ handling */
-		if (time_after_eq(jiffies, xpc_hb_check_timeout)) {
+		if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) {
+			xpc_hb_check_timeout = jiffies +
+			    (xpc_hb_check_interval * HZ);
+
 			dev_dbg(xpc_part, "checking remote heartbeats\n");
 			xpc_check_remote_hb();
 
 			/*
-			 * We need to periodically recheck to ensure no
-			 * IPI/AMO pairs have been missed.  That check
-			 * must always reset xpc_hb_check_timeout.
+			 * On sn2 we need to periodically recheck to ensure no
+			 * IRQ/amo pairs have been missed.
 			 */
-			force_IRQ = 1;
+			if (is_shub())
+				force_IRQ = 1;
 		}
 
 		/* check for outstanding IRQs */
-		new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
-		if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
+		if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) {
 			force_IRQ = 0;
-
-			dev_dbg(xpc_part, "found an IRQ to process; will be "
-				"resetting xpc_hb_check_timeout\n");
-
-			last_IRQ_count += xpc_identify_act_IRQ_sender();
-			if (last_IRQ_count < new_IRQ_count) {
-				/* retry once to help avoid missing AMO */
-				(void)xpc_identify_act_IRQ_sender();
-			}
-			last_IRQ_count = new_IRQ_count;
-
-			xpc_hb_check_timeout = jiffies +
-			    (xpc_hb_check_interval * HZ);
+			dev_dbg(xpc_part, "processing activate IRQs "
+				"received\n");
+			xpc_process_activate_IRQ_rcvd();
 		}
 
 		/* wait for IRQ or timeout */
-		(void)wait_event_interruptible(xpc_act_IRQ_wq,
-					       (last_IRQ_count <
-						atomic_read(&xpc_act_IRQ_rcvd)
-						|| time_after_eq(jiffies,
-							xpc_hb_check_timeout) ||
+		(void)wait_event_interruptible(xpc_activate_IRQ_wq,
+					       (time_is_before_eq_jiffies(
+						xpc_hb_check_timeout) ||
+						xpc_activate_IRQ_rcvd > 0 ||
 						xpc_exiting));
 	}
 
+	xpc_stop_hb_beater();
+
 	dev_dbg(xpc_part, "heartbeat checker is exiting\n");
 
 	/* mark this thread as having exited */
@@ -311,37 +390,8 @@ xpc_initiate_discovery(void *ignore)
 }
 
 /*
- * Establish first contact with the remote partititon. This involves pulling
- * the XPC per partition variables from the remote partition and waiting for
- * the remote partition to pull ours.
- */
-static enum xp_retval
-xpc_make_first_contact(struct xpc_partition *part)
-{
-	enum xp_retval ret;
-
-	while ((ret = xpc_pull_remote_vars_part(part)) != xpSuccess) {
-		if (ret != xpRetry) {
-			XPC_DEACTIVATE_PARTITION(part, ret);
-			return ret;
-		}
-
-		dev_dbg(xpc_chan, "waiting to make first contact with "
-			"partition %d\n", XPC_PARTID(part));
-
-		/* wait a 1/4 of a second or so */
-		(void)msleep_interruptible(250);
-
-		if (part->act_state == XPC_P_DEACTIVATING)
-			return part->reason;
-	}
-
-	return xpc_mark_partition_active(part);
-}
-
-/*
  * The first kthread assigned to a newly activated partition is the one
- * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to
+ * created by XPC HB with which it calls xpc_activating(). XPC hangs on to
  * that kthread until the partition is brought down, at which time that kthread
  * returns back to XPC HB. (The return of that kthread will signify to XPC HB
  * that XPC has dismantled all communication infrastructure for the associated
@@ -354,11 +404,11 @@ xpc_make_first_contact(struct xpc_partition *part)
 static void
 xpc_channel_mgr(struct xpc_partition *part)
 {
-	while (part->act_state != XPC_P_DEACTIVATING ||
+	while (part->act_state != XPC_P_AS_DEACTIVATING ||
 	       atomic_read(&part->nchannels_active) > 0 ||
 	       !xpc_partition_disengaged(part)) {
 
-		xpc_process_channel_activity(part);
+		xpc_process_sent_chctl_flags(part);
 
 		/*
 		 * Wait until we've been requested to activate kthreads or
@@ -376,8 +426,8 @@ xpc_channel_mgr(struct xpc_partition *part)
 		atomic_dec(&part->channel_mgr_requests);
 		(void)wait_event_interruptible(part->channel_mgr_wq,
 				(atomic_read(&part->channel_mgr_requests) > 0 ||
-				 part->local_IPI_amo != 0 ||
-				 (part->act_state == XPC_P_DEACTIVATING &&
+				 part->chctl.all_flags != 0 ||
+				 (part->act_state == XPC_P_AS_DEACTIVATING &&
 				 atomic_read(&part->nchannels_active) == 0 &&
 				 xpc_partition_disengaged(part))));
 		atomic_set(&part->channel_mgr_requests, 1);
@@ -385,47 +435,163 @@ xpc_channel_mgr(struct xpc_partition *part)
 }
 
 /*
- * When XPC HB determines that a partition has come up, it will create a new
- * kthread and that kthread will call this function to attempt to set up the
- * basic infrastructure used for Cross Partition Communication with the newly
- * upped partition.
- *
- * The kthread that was created by XPC HB and which setup the XPC
- * infrastructure will remain assigned to the partition until the partition
- * goes down. At which time the kthread will teardown the XPC infrastructure
- * and then exit.
- *
- * XPC HB will put the remote partition's XPC per partition specific variables
- * physical address into xpc_partitions[partid].remote_vars_part_pa prior to
- * calling xpc_partition_up().
+ * Guarantee that the kzalloc'd memory is cacheline aligned.
  */
-static void
-xpc_partition_up(struct xpc_partition *part)
+void *
+xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
+{
+	/* see if kzalloc will give us cachline aligned memory by default */
+	*base = kzalloc(size, flags);
+	if (*base == NULL)
+		return NULL;
+
+	if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
+		return *base;
+
+	kfree(*base);
+
+	/* nope, we'll have to do it ourselves */
+	*base = kzalloc(size + L1_CACHE_BYTES, flags);
+	if (*base == NULL)
+		return NULL;
+
+	return (void *)L1_CACHE_ALIGN((u64)*base);
+}
+
+/*
+ * Setup the channel structures necessary to support XPartition Communication
+ * between the specified remote partition and the local one.
+ */
+static enum xp_retval
+xpc_setup_ch_structures(struct xpc_partition *part)
 {
+	enum xp_retval ret;
+	int ch_number;
+	struct xpc_channel *ch;
+	short partid = XPC_PARTID(part);
+
+	/*
+	 * Allocate all of the channel structures as a contiguous chunk of
+	 * memory.
+	 */
 	DBUG_ON(part->channels != NULL);
+	part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS,
+				 GFP_KERNEL);
+	if (part->channels == NULL) {
+		dev_err(xpc_chan, "can't get memory for channels\n");
+		return xpNoMemory;
+	}
 
-	dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part));
+	/* allocate the remote open and close args */
 
-	if (xpc_setup_infrastructure(part) != xpSuccess)
-		return;
+	part->remote_openclose_args =
+	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
+					  GFP_KERNEL, &part->
+					  remote_openclose_args_base);
+	if (part->remote_openclose_args == NULL) {
+		dev_err(xpc_chan, "can't get memory for remote connect args\n");
+		ret = xpNoMemory;
+		goto out_1;
+	}
+
+	part->chctl.all_flags = 0;
+	spin_lock_init(&part->chctl_lock);
+
+	atomic_set(&part->channel_mgr_requests, 1);
+	init_waitqueue_head(&part->channel_mgr_wq);
+
+	part->nchannels = XPC_MAX_NCHANNELS;
+
+	atomic_set(&part->nchannels_active, 0);
+	atomic_set(&part->nchannels_engaged, 0);
+
+	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+		ch = &part->channels[ch_number];
+
+		ch->partid = partid;
+		ch->number = ch_number;
+		ch->flags = XPC_C_DISCONNECTED;
+
+		atomic_set(&ch->kthreads_assigned, 0);
+		atomic_set(&ch->kthreads_idle, 0);
+		atomic_set(&ch->kthreads_active, 0);
+
+		atomic_set(&ch->references, 0);
+		atomic_set(&ch->n_to_notify, 0);
+
+		spin_lock_init(&ch->lock);
+		init_completion(&ch->wdisconnect_wait);
+
+		atomic_set(&ch->n_on_msg_allocate_wq, 0);
+		init_waitqueue_head(&ch->msg_allocate_wq);
+		init_waitqueue_head(&ch->idle_wq);
+	}
+
+	ret = xpc_setup_ch_structures_sn(part);
+	if (ret != xpSuccess)
+		goto out_2;
+
+	/*
+	 * With the setting of the partition setup_state to XPC_P_SS_SETUP,
+	 * we're declaring that this partition is ready to go.
+	 */
+	part->setup_state = XPC_P_SS_SETUP;
+
+	return xpSuccess;
+
+	/* setup of ch structures failed */
+out_2:
+	kfree(part->remote_openclose_args_base);
+	part->remote_openclose_args = NULL;
+out_1:
+	kfree(part->channels);
+	part->channels = NULL;
+	return ret;
+}
+
+/*
+ * Teardown the channel structures necessary to support XPartition Communication
+ * between the specified remote partition and the local one.
+ */
+static void
+xpc_teardown_ch_structures(struct xpc_partition *part)
+{
+	DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
+	DBUG_ON(atomic_read(&part->nchannels_active) != 0);
 
 	/*
-	 * The kthread that XPC HB called us with will become the
-	 * channel manager for this partition. It will not return
-	 * back to XPC HB until the partition's XPC infrastructure
-	 * has been dismantled.
+	 * Make this partition inaccessible to local processes by marking it
+	 * as no longer setup. Then wait before proceeding with the teardown
+	 * until all existing references cease.
 	 */
+	DBUG_ON(part->setup_state != XPC_P_SS_SETUP);
+	part->setup_state = XPC_P_SS_WTEARDOWN;
 
-	(void)xpc_part_ref(part);	/* this will always succeed */
+	wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
 
-	if (xpc_make_first_contact(part) == xpSuccess)
-		xpc_channel_mgr(part);
+	/* now we can begin tearing down the infrastructure */
 
-	xpc_part_deref(part);
+	xpc_teardown_ch_structures_sn(part);
 
-	xpc_teardown_infrastructure(part);
+	kfree(part->remote_openclose_args_base);
+	part->remote_openclose_args = NULL;
+	kfree(part->channels);
+	part->channels = NULL;
+
+	part->setup_state = XPC_P_SS_TORNDOWN;
 }
 
+/*
+ * When XPC HB determines that a partition has come up, it will create a new
+ * kthread and that kthread will call this function to attempt to set up the
+ * basic infrastructure used for Cross Partition Communication with the newly
+ * upped partition.
+ *
+ * The kthread that was created by XPC HB and which setup the XPC
+ * infrastructure will remain assigned to the partition becoming the channel
+ * manager for that partition until the partition is deactivating, at which
+ * time the kthread will teardown the XPC infrastructure and then exit.
+ */
 static int
 xpc_activating(void *__partid)
 {
@@ -433,64 +599,47 @@ xpc_activating(void *__partid)
 	struct xpc_partition *part = &xpc_partitions[partid];
 	unsigned long irq_flags;
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
 
-	if (part->act_state == XPC_P_DEACTIVATING) {
-		part->act_state = XPC_P_INACTIVE;
+	if (part->act_state == XPC_P_AS_DEACTIVATING) {
+		part->act_state = XPC_P_AS_INACTIVE;
 		spin_unlock_irqrestore(&part->act_lock, irq_flags);
 		part->remote_rp_pa = 0;
 		return 0;
 	}
 
 	/* indicate the thread is activating */
-	DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ);
-	part->act_state = XPC_P_ACTIVATING;
+	DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ);
+	part->act_state = XPC_P_AS_ACTIVATING;
 
 	XPC_SET_REASON(part, 0, 0);
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
-	dev_dbg(xpc_part, "bringing partition %d up\n", partid);
+	dev_dbg(xpc_part, "activating partition %d\n", partid);
 
-	/*
-	 * Register the remote partition's AMOs with SAL so it can handle
-	 * and cleanup errors within that address range should the remote
-	 * partition go down. We don't unregister this range because it is
-	 * difficult to tell when outstanding writes to the remote partition
-	 * are finished and thus when it is safe to unregister. This should
-	 * not result in wasted space in the SAL xp_addr_region table because
-	 * we should get the same page for remote_amos_page_pa after module
-	 * reloads and system reboots.
-	 */
-	if (sn_register_xp_addr_region(part->remote_amos_page_pa,
-				       PAGE_SIZE, 1) < 0) {
-		dev_warn(xpc_part, "xpc_partition_up(%d) failed to register "
-			 "xp_addr region\n", partid);
+	xpc_allow_hb(partid);
 
-		spin_lock_irqsave(&part->act_lock, irq_flags);
-		part->act_state = XPC_P_INACTIVE;
-		XPC_SET_REASON(part, xpPhysAddrRegFailed, __LINE__);
-		spin_unlock_irqrestore(&part->act_lock, irq_flags);
-		part->remote_rp_pa = 0;
-		return 0;
-	}
+	if (xpc_setup_ch_structures(part) == xpSuccess) {
+		(void)xpc_part_ref(part);	/* this will always succeed */
 
-	xpc_allow_hb(partid, xpc_vars);
-	xpc_IPI_send_activated(part);
+		if (xpc_make_first_contact(part) == xpSuccess) {
+			xpc_mark_partition_active(part);
+			xpc_channel_mgr(part);
+			/* won't return until partition is deactivating */
+		}
 
-	/*
-	 * xpc_partition_up() holds this thread and marks this partition as
-	 * XPC_P_ACTIVE by calling xpc_hb_mark_active().
-	 */
-	(void)xpc_partition_up(part);
+		xpc_part_deref(part);
+		xpc_teardown_ch_structures(part);
+	}
 
-	xpc_disallow_hb(partid, xpc_vars);
+	xpc_disallow_hb(partid);
 	xpc_mark_partition_inactive(part);
 
 	if (part->reason == xpReactivating) {
 		/* interrupting ourselves results in activating partition */
-		xpc_IPI_send_reactivate(part);
+		xpc_request_partition_reactivation(part);
 	}
 
 	return 0;
@@ -505,9 +654,9 @@ xpc_activate_partition(struct xpc_partition *part)
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
 
-	DBUG_ON(part->act_state != XPC_P_INACTIVE);
+	DBUG_ON(part->act_state != XPC_P_AS_INACTIVE);
 
-	part->act_state = XPC_P_ACTIVATION_REQ;
+	part->act_state = XPC_P_AS_ACTIVATION_REQ;
 	XPC_SET_REASON(part, xpCloneKThread, __LINE__);
 
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -516,62 +665,12 @@ xpc_activate_partition(struct xpc_partition *part)
 			      partid);
 	if (IS_ERR(kthread)) {
 		spin_lock_irqsave(&part->act_lock, irq_flags);
-		part->act_state = XPC_P_INACTIVE;
+		part->act_state = XPC_P_AS_INACTIVE;
 		XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
 		spin_unlock_irqrestore(&part->act_lock, irq_flags);
 	}
 }
 
-/*
- * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
- * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
- * than one partition, we use an AMO_t structure per partition to indicate
- * whether a partition has sent an IPI or not.  If it has, then wake up the
- * associated kthread to handle it.
- *
- * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC
- * running on other partitions.
- *
- * Noteworthy Arguments:
- *
- *	irq - Interrupt ReQuest number. NOT USED.
- *
- *	dev_id - partid of IPI's potential sender.
- */
-irqreturn_t
-xpc_notify_IRQ_handler(int irq, void *dev_id)
-{
-	short partid = (short)(u64)dev_id;
-	struct xpc_partition *part = &xpc_partitions[partid];
-
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
-
-	if (xpc_part_ref(part)) {
-		xpc_check_for_channel_activity(part);
-
-		xpc_part_deref(part);
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor
- * because the write to their associated IPI amo completed after the IRQ/IPI
- * was received.
- */
-void
-xpc_dropped_IPI_check(struct xpc_partition *part)
-{
-	if (xpc_part_ref(part)) {
-		xpc_check_for_channel_activity(part);
-
-		part->dropped_IPI_timer.expires = jiffies +
-		    XPC_P_DROPPED_IPI_WAIT;
-		add_timer(&part->dropped_IPI_timer);
-		xpc_part_deref(part);
-	}
-}
-
 void
 xpc_activate_kthreads(struct xpc_channel *ch, int needed)
 {
@@ -616,9 +715,9 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 	do {
 		/* deliver messages to their intended recipients */
 
-		while (ch->w_local_GP.get < ch->w_remote_GP.put &&
+		while (xpc_n_of_deliverable_payloads(ch) > 0 &&
 		       !(ch->flags & XPC_C_DISCONNECTING)) {
-			xpc_deliver_msg(ch);
+			xpc_deliver_payload(ch);
 		}
 
 		if (atomic_inc_return(&ch->kthreads_idle) >
@@ -632,7 +731,7 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 			"wait_event_interruptible_exclusive()\n");
 
 		(void)wait_event_interruptible_exclusive(ch->idle_wq,
-				(ch->w_local_GP.get < ch->w_remote_GP.put ||
+				(xpc_n_of_deliverable_payloads(ch) > 0 ||
 				 (ch->flags & XPC_C_DISCONNECTING)));
 
 		atomic_dec(&ch->kthreads_idle);
@@ -677,7 +776,7 @@ xpc_kthread_start(void *args)
 			 * additional kthreads to help deliver them. We only
 			 * need one less than total #of messages to deliver.
 			 */
-			n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1;
+			n_needed = xpc_n_of_deliverable_payloads(ch) - 1;
 			if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
 				xpc_activate_kthreads(ch, n_needed);
 
@@ -703,11 +802,9 @@ xpc_kthread_start(void *args)
 	}
 	spin_unlock_irqrestore(&ch->lock, irq_flags);
 
-	if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
-		if (atomic_dec_return(&part->nchannels_engaged) == 0) {
-			xpc_mark_partition_disengaged(part);
-			xpc_IPI_send_disengage(part);
-		}
+	if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
+	    atomic_dec_return(&part->nchannels_engaged) == 0) {
+		xpc_indicate_partition_disengaged(part);
 	}
 
 	xpc_msgqueue_deref(ch);
@@ -758,9 +855,9 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
 		} else if (ch->flags & XPC_C_DISCONNECTING) {
 			break;
 
-		} else if (atomic_inc_return(&ch->kthreads_assigned) == 1) {
-			if (atomic_inc_return(&part->nchannels_engaged) == 1)
-				xpc_mark_partition_engaged(part);
+		} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
+			   atomic_inc_return(&part->nchannels_engaged) == 1) {
+				xpc_indicate_partition_engaged(part);
 		}
 		(void)xpc_part_ref(part);
 		xpc_msgqueue_ref(ch);
@@ -782,8 +879,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
 
 			if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
 			    atomic_dec_return(&part->nchannels_engaged) == 0) {
-				xpc_mark_partition_disengaged(part);
-				xpc_IPI_send_disengage(part);
+				xpc_indicate_partition_disengaged(part);
 			}
 			xpc_msgqueue_deref(ch);
 			xpc_part_deref(part);
@@ -815,7 +911,7 @@ xpc_disconnect_wait(int ch_number)
 	int wakeup_channel_mgr;
 
 	/* now wait for all callouts to the caller's function to cease */
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
 		if (!xpc_part_ref(part))
@@ -834,16 +930,15 @@ xpc_disconnect_wait(int ch_number)
 		DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
 		wakeup_channel_mgr = 0;
 
-		if (ch->delayed_IPI_flags) {
-			if (part->act_state != XPC_P_DEACTIVATING) {
-				spin_lock(&part->IPI_lock);
-				XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-						  ch->number,
-						  ch->delayed_IPI_flags);
-				spin_unlock(&part->IPI_lock);
+		if (ch->delayed_chctl_flags) {
+			if (part->act_state != XPC_P_AS_DEACTIVATING) {
+				spin_lock(&part->chctl_lock);
+				part->chctl.flags[ch->number] |=
+				    ch->delayed_chctl_flags;
+				spin_unlock(&part->chctl_lock);
 				wakeup_channel_mgr = 1;
 			}
-			ch->delayed_IPI_flags = 0;
+			ch->delayed_chctl_flags = 0;
 		}
 
 		ch->flags &= ~XPC_C_WDISCONNECT;
@@ -856,13 +951,63 @@ xpc_disconnect_wait(int ch_number)
 	}
 }
 
+static int
+xpc_setup_partitions(void)
+{
+	short partid;
+	struct xpc_partition *part;
+
+	xpc_partitions = kzalloc(sizeof(struct xpc_partition) *
+				 xp_max_npartitions, GFP_KERNEL);
+	if (xpc_partitions == NULL) {
+		dev_err(xpc_part, "can't get memory for partition structure\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * The first few fields of each entry of xpc_partitions[] need to
+	 * be initialized now so that calls to xpc_connect() and
+	 * xpc_disconnect() can be made prior to the activation of any remote
+	 * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
+	 * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
+	 * PARTITION HAS BEEN ACTIVATED.
+	 */
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
+		part = &xpc_partitions[partid];
+
+		DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
+
+		part->activate_IRQ_rcvd = 0;
+		spin_lock_init(&part->act_lock);
+		part->act_state = XPC_P_AS_INACTIVE;
+		XPC_SET_REASON(part, 0, 0);
+
+		init_timer(&part->disengage_timer);
+		part->disengage_timer.function =
+		    xpc_timeout_partition_disengage;
+		part->disengage_timer.data = (unsigned long)part;
+
+		part->setup_state = XPC_P_SS_UNSET;
+		init_waitqueue_head(&part->teardown_wq);
+		atomic_set(&part->references, 0);
+	}
+
+	return xpc_setup_partitions_sn();
+}
+
+static void
+xpc_teardown_partitions(void)
+{
+	kfree(xpc_partitions);
+}
+
 static void
 xpc_do_exit(enum xp_retval reason)
 {
 	short partid;
 	int active_part_count, printed_waiting_msg = 0;
 	struct xpc_partition *part;
-	unsigned long printmsg_time, disengage_request_timeout = 0;
+	unsigned long printmsg_time, disengage_timeout = 0;
 
 	/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
 	DBUG_ON(xpc_exiting == 1);
@@ -873,10 +1018,7 @@ xpc_do_exit(enum xp_retval reason)
 	 * the heartbeat checker thread in case it's sleeping.
 	 */
 	xpc_exiting = 1;
-	wake_up_interruptible(&xpc_act_IRQ_wq);
-
-	/* ignore all incoming interrupts */
-	free_irq(SGI_XPC_ACTIVATE, NULL);
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
 
 	/* wait for the discovery thread to exit */
 	wait_for_completion(&xpc_discovery_exited);
@@ -889,17 +1031,17 @@ xpc_do_exit(enum xp_retval reason)
 
 	/* wait for all partitions to become inactive */
 
-	printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
-	xpc_disengage_request_timedout = 0;
+	printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
+	xpc_disengage_timedout = 0;
 
 	do {
 		active_part_count = 0;
 
-		for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+		for (partid = 0; partid < xp_max_npartitions; partid++) {
 			part = &xpc_partitions[partid];
 
 			if (xpc_partition_disengaged(part) &&
-			    part->act_state == XPC_P_INACTIVE) {
+			    part->act_state == XPC_P_AS_INACTIVE) {
 				continue;
 			}
 
@@ -907,36 +1049,32 @@ xpc_do_exit(enum xp_retval reason)
 
 			XPC_DEACTIVATE_PARTITION(part, reason);
 
-			if (part->disengage_request_timeout >
-			    disengage_request_timeout) {
-				disengage_request_timeout =
-				    part->disengage_request_timeout;
-			}
+			if (part->disengage_timeout > disengage_timeout)
+				disengage_timeout = part->disengage_timeout;
 		}
 
-		if (xpc_partition_engaged(-1UL)) {
-			if (time_after(jiffies, printmsg_time)) {
+		if (xpc_any_partition_engaged()) {
+			if (time_is_before_jiffies(printmsg_time)) {
 				dev_info(xpc_part, "waiting for remote "
-					 "partitions to disengage, timeout in "
-					 "%ld seconds\n",
-					 (disengage_request_timeout - jiffies)
-					 / HZ);
+					 "partitions to deactivate, timeout in "
+					 "%ld seconds\n", (disengage_timeout -
+					 jiffies) / HZ);
 				printmsg_time = jiffies +
-				    (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+				    (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
 				printed_waiting_msg = 1;
 			}
 
 		} else if (active_part_count > 0) {
 			if (printed_waiting_msg) {
 				dev_info(xpc_part, "waiting for local partition"
-					 " to disengage\n");
+					 " to deactivate\n");
 				printed_waiting_msg = 0;
 			}
 
 		} else {
-			if (!xpc_disengage_request_timedout) {
+			if (!xpc_disengage_timedout) {
 				dev_info(xpc_part, "all partitions have "
-					 "disengaged\n");
+					 "deactivated\n");
 			}
 			break;
 		}
@@ -946,33 +1084,28 @@ xpc_do_exit(enum xp_retval reason)
 
 	} while (1);
 
-	DBUG_ON(xpc_partition_engaged(-1UL));
+	DBUG_ON(xpc_any_partition_engaged());
+	DBUG_ON(xpc_any_hbs_allowed() != 0);
 
-	/* indicate to others that our reserved page is uninitialized */
-	xpc_rsvd_page->vars_pa = 0;
-
-	/* now it's time to eliminate our heartbeat */
-	del_timer_sync(&xpc_hb_timer);
-	DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
+	xpc_teardown_rsvd_page();
 
 	if (reason == xpUnloading) {
-		/* take ourselves off of the reboot_notifier_list */
-		(void)unregister_reboot_notifier(&xpc_reboot_notifier);
-
-		/* take ourselves off of the die_notifier list */
 		(void)unregister_die_notifier(&xpc_die_notifier);
+		(void)unregister_reboot_notifier(&xpc_reboot_notifier);
 	}
 
-	/* close down protections for IPI operations */
-	xpc_restrict_IPI_ops();
-
 	/* clear the interface to XPC's functions */
 	xpc_clear_interface();
 
 	if (xpc_sysctl)
 		unregister_sysctl_table(xpc_sysctl);
 
-	kfree(xpc_remote_copy_buffer_base);
+	xpc_teardown_partitions();
+
+	if (is_shub())
+		xpc_exit_sn2();
+	else
+		xpc_exit_uv();
 }
 
 /*
@@ -1002,60 +1135,57 @@ xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
 }
 
 /*
- * Notify other partitions to disengage from all references to our memory.
+ * Notify other partitions to deactivate from us by first disengaging from all
+ * references to our memory.
  */
 static void
-xpc_die_disengage(void)
+xpc_die_deactivate(void)
 {
 	struct xpc_partition *part;
 	short partid;
-	unsigned long engaged;
-	long time, printmsg_time, disengage_request_timeout;
+	int any_engaged;
+	long keep_waiting;
+	long wait_to_print;
 
 	/* keep xpc_hb_checker thread from doing anything (just in case) */
 	xpc_exiting = 1;
 
-	xpc_vars->heartbeating_to_mask = 0;	/* indicate we're deactivated */
+	xpc_disallow_all_hbs();	/*indicate we're deactivated */
 
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
-		if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part->
-		    remote_vars_version)) {
-
-			/* just in case it was left set by an earlier XPC */
-			xpc_clear_partition_engaged(1UL << partid);
-			continue;
-		}
-
-		if (xpc_partition_engaged(1UL << partid) ||
-		    part->act_state != XPC_P_INACTIVE) {
-			xpc_request_partition_disengage(part);
-			xpc_mark_partition_disengaged(part);
-			xpc_IPI_send_disengage(part);
+		if (xpc_partition_engaged(partid) ||
+		    part->act_state != XPC_P_AS_INACTIVE) {
+			xpc_request_partition_deactivation(part);
+			xpc_indicate_partition_disengaged(part);
 		}
 	}
 
-	time = rtc_time();
-	printmsg_time = time +
-	    (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second);
-	disengage_request_timeout = time +
-	    (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second);
-
-	/* wait for all other partitions to disengage from us */
+	/*
+	 * Though we requested that all other partitions deactivate from us,
+	 * we only wait until they've all disengaged or we've reached the
+	 * defined timelimit.
+	 *
+	 * Given that one iteration through the following while-loop takes
+	 * approximately 200 microseconds, calculate the #of loops to take
+	 * before bailing and the #of loops before printing a waiting message.
+	 */
+	keep_waiting = xpc_disengage_timelimit * 1000 * 5;
+	wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
 
 	while (1) {
-		engaged = xpc_partition_engaged(-1UL);
-		if (!engaged) {
-			dev_info(xpc_part, "all partitions have disengaged\n");
+		any_engaged = xpc_any_partition_engaged();
+		if (!any_engaged) {
+			dev_info(xpc_part, "all partitions have deactivated\n");
 			break;
 		}
 
-		time = rtc_time();
-		if (time >= disengage_request_timeout) {
-			for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-				if (engaged & (1UL << partid)) {
-					dev_info(xpc_part, "disengage from "
+		if (!keep_waiting--) {
+			for (partid = 0; partid < xp_max_npartitions;
+			     partid++) {
+				if (xpc_partition_engaged(partid)) {
+					dev_info(xpc_part, "deactivate from "
 						 "remote partition %d timed "
 						 "out\n", partid);
 				}
@@ -1063,15 +1193,15 @@ xpc_die_disengage(void)
 			break;
 		}
 
-		if (time >= printmsg_time) {
+		if (!wait_to_print--) {
 			dev_info(xpc_part, "waiting for remote partitions to "
-				 "disengage, timeout in %ld seconds\n",
-				 (disengage_request_timeout - time) /
-				 sn_rtc_cycles_per_second);
-			printmsg_time = time +
-			    (XPC_DISENGAGE_PRINTMSG_INTERVAL *
-			     sn_rtc_cycles_per_second);
+				 "deactivate, timeout in %ld seconds\n",
+				 keep_waiting / (1000 * 5));
+			wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL *
+			    1000 * 5;
 		}
+
+		udelay(200);
 	}
 }
 
@@ -1086,10 +1216,11 @@ xpc_die_disengage(void)
 static int
 xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 {
+#ifdef CONFIG_IA64		/* !!! temporary kludge */
 	switch (event) {
 	case DIE_MACHINE_RESTART:
 	case DIE_MACHINE_HALT:
-		xpc_die_disengage();
+		xpc_die_deactivate();
 		break;
 
 	case DIE_KDEBUG_ENTER:
@@ -1100,8 +1231,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 		/* fall through */
 	case DIE_MCA_MONARCH_ENTER:
 	case DIE_INIT_MONARCH_ENTER:
-		xpc_vars->heartbeat++;
-		xpc_vars->heartbeat_offline = 1;
+		xpc_offline_heartbeat();
 		break;
 
 	case DIE_KDEBUG_LEAVE:
@@ -1112,10 +1242,12 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 		/* fall through */
 	case DIE_MCA_MONARCH_LEAVE:
 	case DIE_INIT_MONARCH_LEAVE:
-		xpc_vars->heartbeat++;
-		xpc_vars->heartbeat_offline = 0;
+		xpc_online_heartbeat();
 		break;
 	}
+#else
+	xpc_die_deactivate();
+#endif
 
 	return NOTIFY_DONE;
 }
@@ -1124,105 +1256,52 @@ int __init
 xpc_init(void)
 {
 	int ret;
-	short partid;
-	struct xpc_partition *part;
 	struct task_struct *kthread;
-	size_t buf_size;
-
-	if (!ia64_platform_is("sn2"))
-		return -ENODEV;
-
-	buf_size = max(XPC_RP_VARS_SIZE,
-		       XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
-	xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
-							       GFP_KERNEL,
-						  &xpc_remote_copy_buffer_base);
-	if (xpc_remote_copy_buffer == NULL)
-		return -ENOMEM;
 
 	snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
 	snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
 
-	xpc_sysctl = register_sysctl_table(xpc_sys_dir);
-
-	/*
-	 * The first few fields of each entry of xpc_partitions[] need to
-	 * be initialized now so that calls to xpc_connect() and
-	 * xpc_disconnect() can be made prior to the activation of any remote
-	 * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
-	 * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
-	 * PARTITION HAS BEEN ACTIVATED.
-	 */
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-		part = &xpc_partitions[partid];
-
-		DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
-
-		part->act_IRQ_rcvd = 0;
-		spin_lock_init(&part->act_lock);
-		part->act_state = XPC_P_INACTIVE;
-		XPC_SET_REASON(part, 0, 0);
+	if (is_shub()) {
+		/*
+		 * The ia64-sn2 architecture supports at most 64 partitions.
+		 * And the inability to unregister remote amos restricts us
+		 * further to only support exactly 64 partitions on this
+		 * architecture, no less.
+		 */
+		if (xp_max_npartitions != 64) {
+			dev_err(xpc_part, "max #of partitions not set to 64\n");
+			ret = -EINVAL;
+		} else {
+			ret = xpc_init_sn2();
+		}
 
-		init_timer(&part->disengage_request_timer);
-		part->disengage_request_timer.function =
-		    xpc_timeout_partition_disengage_request;
-		part->disengage_request_timer.data = (unsigned long)part;
+	} else if (is_uv()) {
+		ret = xpc_init_uv();
 
-		part->setup_state = XPC_P_UNSET;
-		init_waitqueue_head(&part->teardown_wq);
-		atomic_set(&part->references, 0);
+	} else {
+		ret = -ENODEV;
 	}
 
-	/*
-	 * Open up protections for IPI operations (and AMO operations on
-	 * Shub 1.1 systems).
-	 */
-	xpc_allow_IPI_ops();
-
-	/*
-	 * Interrupts being processed will increment this atomic variable and
-	 * awaken the heartbeat thread which will process the interrupts.
-	 */
-	atomic_set(&xpc_act_IRQ_rcvd, 0);
+	if (ret != 0)
+		return ret;
 
-	/*
-	 * This is safe to do before the xpc_hb_checker thread has started
-	 * because the handler releases a wait queue.  If an interrupt is
-	 * received before the thread is waiting, it will not go to sleep,
-	 * but rather immediately process the interrupt.
-	 */
-	ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0,
-			  "xpc hb", NULL);
+	ret = xpc_setup_partitions();
 	if (ret != 0) {
-		dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
-			"errno=%d\n", -ret);
-
-		xpc_restrict_IPI_ops();
-
-		if (xpc_sysctl)
-			unregister_sysctl_table(xpc_sysctl);
-
-		kfree(xpc_remote_copy_buffer_base);
-		return -EBUSY;
+		dev_err(xpc_part, "can't get memory for partition structure\n");
+		goto out_1;
 	}
 
+	xpc_sysctl = register_sysctl_table(xpc_sys_dir);
+
 	/*
 	 * Fill the partition reserved page with the information needed by
 	 * other partitions to discover we are alive and establish initial
 	 * communications.
 	 */
-	xpc_rsvd_page = xpc_rsvd_page_init();
-	if (xpc_rsvd_page == NULL) {
-		dev_err(xpc_part, "could not setup our reserved page\n");
-
-		free_irq(SGI_XPC_ACTIVATE, NULL);
-		xpc_restrict_IPI_ops();
-
-		if (xpc_sysctl)
-			unregister_sysctl_table(xpc_sysctl);
-
-		kfree(xpc_remote_copy_buffer_base);
-		return -EBUSY;
+	ret = xpc_setup_rsvd_page();
+	if (ret != 0) {
+		dev_err(xpc_part, "can't setup our reserved page\n");
+		goto out_2;
 	}
 
 	/* add ourselves to the reboot_notifier_list */
@@ -1235,9 +1314,6 @@ xpc_init(void)
 	if (ret != 0)
 		dev_warn(xpc_part, "can't register die notifier\n");
 
-	init_timer(&xpc_hb_timer);
-	xpc_hb_timer.function = xpc_hb_beater;
-
 	/*
 	 * The real work-horse behind xpc.  This processes incoming
 	 * interrupts and monitors remote heartbeats.
@@ -1245,25 +1321,8 @@ xpc_init(void)
 	kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME);
 	if (IS_ERR(kthread)) {
 		dev_err(xpc_part, "failed while forking hb check thread\n");
-
-		/* indicate to others that our reserved page is uninitialized */
-		xpc_rsvd_page->vars_pa = 0;
-
-		/* take ourselves off of the reboot_notifier_list */
-		(void)unregister_reboot_notifier(&xpc_reboot_notifier);
-
-		/* take ourselves off of the die_notifier list */
-		(void)unregister_die_notifier(&xpc_die_notifier);
-
-		del_timer_sync(&xpc_hb_timer);
-		free_irq(SGI_XPC_ACTIVATE, NULL);
-		xpc_restrict_IPI_ops();
-
-		if (xpc_sysctl)
-			unregister_sysctl_table(xpc_sysctl);
-
-		kfree(xpc_remote_copy_buffer_base);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto out_3;
 	}
 
 	/*
@@ -1285,11 +1344,28 @@ xpc_init(void)
 
 	/* set the interface to point at XPC's functions */
 	xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect,
-			  xpc_initiate_allocate, xpc_initiate_send,
-			  xpc_initiate_send_notify, xpc_initiate_received,
-			  xpc_initiate_partid_to_nasids);
+			  xpc_initiate_send, xpc_initiate_send_notify,
+			  xpc_initiate_received, xpc_initiate_partid_to_nasids);
 
 	return 0;
+
+	/* initialization was not successful */
+out_3:
+	xpc_teardown_rsvd_page();
+
+	(void)unregister_die_notifier(&xpc_die_notifier);
+	(void)unregister_reboot_notifier(&xpc_reboot_notifier);
+out_2:
+	if (xpc_sysctl)
+		unregister_sysctl_table(xpc_sysctl);
+
+	xpc_teardown_partitions();
+out_1:
+	if (is_shub())
+		xpc_exit_sn2();
+	else
+		xpc_exit_uv();
+	return ret;
 }
 
 module_init(xpc_init);
@@ -1314,9 +1390,9 @@ module_param(xpc_hb_check_interval, int, 0);
 MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
 		 "heartbeat checks.");
 
-module_param(xpc_disengage_request_timelimit, int, 0);
-MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
-		 "for disengage request to complete.");
+module_param(xpc_disengage_timelimit, int, 0);
+MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait "
+		 "for disengage to complete.");
 
 module_param(xpc_kdebug_ignore, int, 0);
 MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index 7dd4b5812c4..6722f6fe4dc 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -15,57 +15,22 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <linux/cache.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-#include <asm/uncached.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/addrs.h>
+#include <linux/device.h>
+#include <linux/hardirq.h>
 #include "xpc.h"
 
 /* XPC is exiting flag */
 int xpc_exiting;
 
-/* SH_IPI_ACCESS shub register value on startup */
-static u64 xpc_sh1_IPI_access;
-static u64 xpc_sh2_IPI_access0;
-static u64 xpc_sh2_IPI_access1;
-static u64 xpc_sh2_IPI_access2;
-static u64 xpc_sh2_IPI_access3;
-
-/* original protection values for each node */
-u64 xpc_prot_vec[MAX_NUMNODES];
-
 /* this partition's reserved page pointers */
 struct xpc_rsvd_page *xpc_rsvd_page;
-static u64 *xpc_part_nasids;
-static u64 *xpc_mach_nasids;
-struct xpc_vars *xpc_vars;
-struct xpc_vars_part *xpc_vars_part;
+static unsigned long *xpc_part_nasids;
+unsigned long *xpc_mach_nasids;
 
-static int xp_nasid_mask_bytes;	/* actual size in bytes of nasid mask */
-static int xp_nasid_mask_words;	/* actual size in words of nasid mask */
-
-/*
- * For performance reasons, each entry of xpc_partitions[] is cacheline
- * aligned. And xpc_partitions[] is padded with an additional entry at the
- * end so that the last legitimate entry doesn't share its cacheline with
- * another variable.
- */
-struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
+static int xpc_nasid_mask_nbytes;	/* #of bytes in nasid mask */
+int xpc_nasid_mask_nlongs;	/* #of longs in nasid mask */
 
-/*
- * Generic buffer used to store a local copy of portions of a remote
- * partition's reserved page (either its header and part_nasids mask,
- * or its vars).
- */
-char *xpc_remote_copy_buffer;
-void *xpc_remote_copy_buffer_base;
+struct xpc_partition *xpc_partitions;
 
 /*
  * Guarantee that the kmalloc'd memory is cacheline aligned.
@@ -95,56 +60,59 @@ xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
  * Given a nasid, get the physical address of the  partition's reserved page
  * for that nasid. This function returns 0 on any error.
  */
-static u64
+static unsigned long
 xpc_get_rsvd_page_pa(int nasid)
 {
-	bte_result_t bte_res;
-	s64 status;
+	enum xp_retval ret;
 	u64 cookie = 0;
-	u64 rp_pa = nasid;	/* seed with nasid */
-	u64 len = 0;
-	u64 buf = buf;
-	u64 buf_len = 0;
+	unsigned long rp_pa = nasid;	/* seed with nasid */
+	size_t len = 0;
+	size_t buf_len = 0;
+	void *buf = buf;
 	void *buf_base = NULL;
 
 	while (1) {
 
-		status = sn_partition_reserved_page_pa(buf, &cookie, &rp_pa,
-						       &len);
+		/* !!! rp_pa will need to be _gpa on UV.
+		 * ??? So do we save it into the architecture specific parts
+		 * ??? of the xpc_partition structure? Do we rename this
+		 * ??? function or have two versions? Rename rp_pa for UV to
+		 * ??? rp_gpa?
+		 */
+		ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa,
+						     &len);
 
-		dev_dbg(xpc_part, "SAL returned with status=%li, cookie="
-			"0x%016lx, address=0x%016lx, len=0x%016lx\n",
-			status, cookie, rp_pa, len);
+		dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, "
+			"address=0x%016lx, len=0x%016lx\n", ret,
+			(unsigned long)cookie, rp_pa, len);
 
-		if (status != SALRET_MORE_PASSES)
+		if (ret != xpNeedMoreInfo)
 			break;
 
+		/* !!! L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */
 		if (L1_CACHE_ALIGN(len) > buf_len) {
 			kfree(buf_base);
 			buf_len = L1_CACHE_ALIGN(len);
-			buf = (u64)xpc_kmalloc_cacheline_aligned(buf_len,
-								 GFP_KERNEL,
-								 &buf_base);
+			buf = xpc_kmalloc_cacheline_aligned(buf_len, GFP_KERNEL,
+							    &buf_base);
 			if (buf_base == NULL) {
 				dev_err(xpc_part, "unable to kmalloc "
 					"len=0x%016lx\n", buf_len);
-				status = SALRET_ERROR;
+				ret = xpNoMemory;
 				break;
 			}
 		}
 
-		bte_res = xp_bte_copy(rp_pa, buf, buf_len,
-				      (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-		if (bte_res != BTE_SUCCESS) {
-			dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
-			status = SALRET_ERROR;
+		ret = xp_remote_memcpy(xp_pa(buf), rp_pa, buf_len);
+		if (ret != xpSuccess) {
+			dev_dbg(xpc_part, "xp_remote_memcpy failed %d\n", ret);
 			break;
 		}
 	}
 
 	kfree(buf_base);
 
-	if (status != SALRET_OK)
+	if (ret != xpSuccess)
 		rp_pa = 0;
 
 	dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", rp_pa);
@@ -156,300 +124,77 @@ xpc_get_rsvd_page_pa(int nasid)
  * other partitions to discover we are alive and establish initial
  * communications.
  */
-struct xpc_rsvd_page *
-xpc_rsvd_page_init(void)
+int
+xpc_setup_rsvd_page(void)
 {
+	int ret;
 	struct xpc_rsvd_page *rp;
-	AMO_t *amos_page;
-	u64 rp_pa, nasid_array = 0;
-	int i, ret;
+	unsigned long rp_pa;
+	unsigned long new_ts_jiffies;
 
 	/* get the local reserved page's address */
 
 	preempt_disable();
-	rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id()));
+	rp_pa = xpc_get_rsvd_page_pa(xp_cpu_to_nasid(smp_processor_id()));
 	preempt_enable();
 	if (rp_pa == 0) {
 		dev_err(xpc_part, "SAL failed to locate the reserved page\n");
-		return NULL;
+		return -ESRCH;
 	}
 	rp = (struct xpc_rsvd_page *)__va(rp_pa);
 
-	if (rp->partid != sn_partition_id) {
-		dev_err(xpc_part, "the reserved page's partid of %d should be "
-			"%d\n", rp->partid, sn_partition_id);
-		return NULL;
+	if (rp->SAL_version < 3) {
+		/* SAL_versions < 3 had a SAL_partid defined as a u8 */
+		rp->SAL_partid &= 0xff;
+	}
+	BUG_ON(rp->SAL_partid != xp_partition_id);
+
+	if (rp->SAL_partid < 0 || rp->SAL_partid >= xp_max_npartitions) {
+		dev_err(xpc_part, "the reserved page's partid of %d is outside "
+			"supported range (< 0 || >= %d)\n", rp->SAL_partid,
+			xp_max_npartitions);
+		return -EINVAL;
 	}
 
 	rp->version = XPC_RP_VERSION;
+	rp->max_npartitions = xp_max_npartitions;
 
 	/* establish the actual sizes of the nasid masks */
 	if (rp->SAL_version == 1) {
 		/* SAL_version 1 didn't set the nasids_size field */
-		rp->nasids_size = 128;
+		rp->SAL_nasids_size = 128;
 	}
-	xp_nasid_mask_bytes = rp->nasids_size;
-	xp_nasid_mask_words = xp_nasid_mask_bytes / 8;
+	xpc_nasid_mask_nbytes = rp->SAL_nasids_size;
+	xpc_nasid_mask_nlongs = BITS_TO_LONGS(rp->SAL_nasids_size *
+					      BITS_PER_BYTE);
 
 	/* setup the pointers to the various items in the reserved page */
 	xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
 	xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
-	xpc_vars = XPC_RP_VARS(rp);
-	xpc_vars_part = XPC_RP_VARS_PART(rp);
-
-	/*
-	 * Before clearing xpc_vars, see if a page of AMOs had been previously
-	 * allocated. If not we'll need to allocate one and set permissions
-	 * so that cross-partition AMOs are allowed.
-	 *
-	 * The allocated AMO page needs MCA reporting to remain disabled after
-	 * XPC has unloaded.  To make this work, we keep a copy of the pointer
-	 * to this page (i.e., amos_page) in the struct xpc_vars structure,
-	 * which is pointed to by the reserved page, and re-use that saved copy
-	 * on subsequent loads of XPC. This AMO page is never freed, and its
-	 * memory protections are never restricted.
-	 */
-	amos_page = xpc_vars->amos_page;
-	if (amos_page == NULL) {
-		amos_page = (AMO_t *)TO_AMO(uncached_alloc_page(0, 1));
-		if (amos_page == NULL) {
-			dev_err(xpc_part, "can't allocate page of AMOs\n");
-			return NULL;
-		}
-
-		/*
-		 * Open up AMO-R/W to cpu.  This is done for Shub 1.1 systems
-		 * when xpc_allow_IPI_ops() is called via xpc_hb_init().
-		 */
-		if (!enable_shub_wars_1_1()) {
-			ret = sn_change_memprotect(ia64_tpa((u64)amos_page),
-						   PAGE_SIZE,
-						   SN_MEMPROT_ACCESS_CLASS_1,
-						   &nasid_array);
-			if (ret != 0) {
-				dev_err(xpc_part, "can't change memory "
-					"protections\n");
-				uncached_free_page(__IA64_UNCACHED_OFFSET |
-						   TO_PHYS((u64)amos_page), 1);
-				return NULL;
-			}
-		}
-	} else if (!IS_AMO_ADDRESS((u64)amos_page)) {
-		/*
-		 * EFI's XPBOOT can also set amos_page in the reserved page,
-		 * but it happens to leave it as an uncached physical address
-		 * and we need it to be an uncached virtual, so we'll have to
-		 * convert it.
-		 */
-		if (!IS_AMO_PHYS_ADDRESS((u64)amos_page)) {
-			dev_err(xpc_part, "previously used amos_page address "
-				"is bad = 0x%p\n", (void *)amos_page);
-			return NULL;
-		}
-		amos_page = (AMO_t *)TO_AMO((u64)amos_page);
-	}
-
-	/* clear xpc_vars */
-	memset(xpc_vars, 0, sizeof(struct xpc_vars));
-
-	xpc_vars->version = XPC_V_VERSION;
-	xpc_vars->act_nasid = cpuid_to_nasid(0);
-	xpc_vars->act_phys_cpuid = cpu_physical_id(0);
-	xpc_vars->vars_part_pa = __pa(xpc_vars_part);
-	xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page);
-	xpc_vars->amos_page = amos_page;	/* save for next load of XPC */
-
-	/* clear xpc_vars_part */
-	memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
-	       XP_MAX_PARTITIONS);
-
-	/* initialize the activate IRQ related AMO variables */
-	for (i = 0; i < xp_nasid_mask_words; i++)
-		(void)xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i);
-
-	/* initialize the engaged remote partitions related AMO variables */
-	(void)xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO);
-	(void)xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO);
 
-	/* timestamp of when reserved page was setup by XPC */
-	rp->stamp = CURRENT_TIME;
+	ret = xpc_setup_rsvd_page_sn(rp);
+	if (ret != 0)
+		return ret;
 
 	/*
+	 * Set timestamp of when reserved page was setup by XPC.
 	 * This signifies to the remote partition that our reserved
 	 * page is initialized.
 	 */
-	rp->vars_pa = __pa(xpc_vars);
+	new_ts_jiffies = jiffies;
+	if (new_ts_jiffies == 0 || new_ts_jiffies == rp->ts_jiffies)
+		new_ts_jiffies++;
+	rp->ts_jiffies = new_ts_jiffies;
 
-	return rp;
+	xpc_rsvd_page = rp;
+	return 0;
 }
 
-/*
- * Change protections to allow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
 void
-xpc_allow_IPI_ops(void)
+xpc_teardown_rsvd_page(void)
 {
-	int node;
-	int nasid;
-
-	/* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
-	if (is_shub2()) {
-		xpc_sh2_IPI_access0 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
-		xpc_sh2_IPI_access1 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
-		xpc_sh2_IPI_access2 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
-		xpc_sh2_IPI_access3 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
-			      -1UL);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
-			      -1UL);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
-			      -1UL);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
-			      -1UL);
-		}
-
-	} else {
-		xpc_sh1_IPI_access =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
-			      -1UL);
-
-			/*
-			 * Since the BIST collides with memory operations on
-			 * SHUB 1.1 sn_change_memprotect() cannot be used.
-			 */
-			if (enable_shub_wars_1_1()) {
-				/* open up everything */
-				xpc_prot_vec[node] = (u64)HUB_L((u64 *)
-								GLOBAL_MMR_ADDR
-								(nasid,
-						  SH1_MD_DQLP_MMR_DIR_PRIVEC0));
-				HUB_S((u64 *)
-				      GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQLP_MMR_DIR_PRIVEC0),
-				      -1UL);
-				HUB_S((u64 *)
-				      GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQRP_MMR_DIR_PRIVEC0),
-				      -1UL);
-			}
-		}
-	}
-}
-
-/*
- * Restrict protections to disallow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
-void
-xpc_restrict_IPI_ops(void)
-{
-	int node;
-	int nasid;
-
-	/* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
-	if (is_shub2()) {
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
-			      xpc_sh2_IPI_access0);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
-			      xpc_sh2_IPI_access1);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
-			      xpc_sh2_IPI_access2);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
-			      xpc_sh2_IPI_access3);
-		}
-
-	} else {
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
-			      xpc_sh1_IPI_access);
-
-			if (enable_shub_wars_1_1()) {
-				HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQLP_MMR_DIR_PRIVEC0),
-				      xpc_prot_vec[node]);
-				HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQRP_MMR_DIR_PRIVEC0),
-				      xpc_prot_vec[node]);
-			}
-		}
-	}
-}
-
-/*
- * At periodic intervals, scan through all active partitions and ensure
- * their heartbeat is still active.  If not, the partition is deactivated.
- */
-void
-xpc_check_remote_hb(void)
-{
-	struct xpc_vars *remote_vars;
-	struct xpc_partition *part;
-	short partid;
-	bte_result_t bres;
-
-	remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
-
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-
-		if (xpc_exiting)
-			break;
-
-		if (partid == sn_partition_id)
-			continue;
-
-		part = &xpc_partitions[partid];
-
-		if (part->act_state == XPC_P_INACTIVE ||
-		    part->act_state == XPC_P_DEACTIVATING) {
-			continue;
-		}
-
-		/* pull the remote_hb cache line */
-		bres = xp_bte_copy(part->remote_vars_pa,
-				   (u64)remote_vars,
-				   XPC_RP_VARS_SIZE,
-				   (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-		if (bres != BTE_SUCCESS) {
-			XPC_DEACTIVATE_PARTITION(part,
-						 xpc_map_bte_errors(bres));
-			continue;
-		}
-
-		dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat"
-			" = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n",
-			partid, remote_vars->heartbeat, part->last_heartbeat,
-			remote_vars->heartbeat_offline,
-			remote_vars->heartbeating_to_mask);
-
-		if (((remote_vars->heartbeat == part->last_heartbeat) &&
-		     (remote_vars->heartbeat_offline == 0)) ||
-		    !xpc_hb_allowed(sn_partition_id, remote_vars)) {
-
-			XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat);
-			continue;
-		}
-
-		part->last_heartbeat = remote_vars->heartbeat;
-	}
+	/* a zero timestamp indicates our rsvd page is not initialized */
+	xpc_rsvd_page->ts_jiffies = 0;
 }
 
 /*
@@ -459,11 +204,12 @@ xpc_check_remote_hb(void)
  * is large enough to contain a copy of their reserved page header and
  * part_nasids mask.
  */
-static enum xp_retval
-xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
-		  struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
+enum xp_retval
+xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids,
+		  struct xpc_rsvd_page *remote_rp, unsigned long *remote_rp_pa)
 {
-	int bres, i;
+	int l;
+	enum xp_retval ret;
 
 	/* get the reserved page's physical address */
 
@@ -472,355 +218,45 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
 		return xpNoRsvdPageAddr;
 
 	/* pull over the reserved page header and part_nasids mask */
-	bres = xp_bte_copy(*remote_rp_pa, (u64)remote_rp,
-			   XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
-			   (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-	if (bres != BTE_SUCCESS)
-		return xpc_map_bte_errors(bres);
+	ret = xp_remote_memcpy(xp_pa(remote_rp), *remote_rp_pa,
+			       XPC_RP_HEADER_SIZE + xpc_nasid_mask_nbytes);
+	if (ret != xpSuccess)
+		return ret;
 
 	if (discovered_nasids != NULL) {
-		u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp);
-
-		for (i = 0; i < xp_nasid_mask_words; i++)
-			discovered_nasids[i] |= remote_part_nasids[i];
-	}
-
-	/* check that the partid is for another partition */
+		unsigned long *remote_part_nasids =
+		    XPC_RP_PART_NASIDS(remote_rp);
 
-	if (remote_rp->partid < 1 ||
-	    remote_rp->partid > (XP_MAX_PARTITIONS - 1)) {
-		return xpInvalidPartid;
+		for (l = 0; l < xpc_nasid_mask_nlongs; l++)
+			discovered_nasids[l] |= remote_part_nasids[l];
 	}
 
-	if (remote_rp->partid == sn_partition_id)
-		return xpLocalPartid;
+	/* zero timestamp indicates the reserved page has not been setup */
+	if (remote_rp->ts_jiffies == 0)
+		return xpRsvdPageNotSet;
 
 	if (XPC_VERSION_MAJOR(remote_rp->version) !=
 	    XPC_VERSION_MAJOR(XPC_RP_VERSION)) {
 		return xpBadVersion;
 	}
 
-	return xpSuccess;
-}
-
-/*
- * Get a copy of the remote partition's XPC variables from the reserved page.
- *
- * remote_vars points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_RP_VARS_SIZE.
- */
-static enum xp_retval
-xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
-{
-	int bres;
-
-	if (remote_vars_pa == 0)
-		return xpVarsNotSet;
-
-	/* pull over the cross partition variables */
-	bres = xp_bte_copy(remote_vars_pa, (u64)remote_vars, XPC_RP_VARS_SIZE,
-			   (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-	if (bres != BTE_SUCCESS)
-		return xpc_map_bte_errors(bres);
-
-	if (XPC_VERSION_MAJOR(remote_vars->version) !=
-	    XPC_VERSION_MAJOR(XPC_V_VERSION)) {
-		return xpBadVersion;
-	}
-
-	return xpSuccess;
-}
-
-/*
- * Update the remote partition's info.
- */
-static void
-xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
-			  struct timespec *remote_rp_stamp, u64 remote_rp_pa,
-			  u64 remote_vars_pa, struct xpc_vars *remote_vars)
-{
-	part->remote_rp_version = remote_rp_version;
-	dev_dbg(xpc_part, "  remote_rp_version = 0x%016x\n",
-		part->remote_rp_version);
-
-	part->remote_rp_stamp = *remote_rp_stamp;
-	dev_dbg(xpc_part, "  remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n",
-		part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec);
-
-	part->remote_rp_pa = remote_rp_pa;
-	dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
-
-	part->remote_vars_pa = remote_vars_pa;
-	dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
-		part->remote_vars_pa);
-
-	part->last_heartbeat = remote_vars->heartbeat;
-	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
-		part->last_heartbeat);
-
-	part->remote_vars_part_pa = remote_vars->vars_part_pa;
-	dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
-		part->remote_vars_part_pa);
-
-	part->remote_act_nasid = remote_vars->act_nasid;
-	dev_dbg(xpc_part, "  remote_act_nasid = 0x%x\n",
-		part->remote_act_nasid);
-
-	part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
-	dev_dbg(xpc_part, "  remote_act_phys_cpuid = 0x%x\n",
-		part->remote_act_phys_cpuid);
-
-	part->remote_amos_page_pa = remote_vars->amos_page_pa;
-	dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
-		part->remote_amos_page_pa);
-
-	part->remote_vars_version = remote_vars->version;
-	dev_dbg(xpc_part, "  remote_vars_version = 0x%x\n",
-		part->remote_vars_version);
-}
-
-/*
- * Prior code has determined the nasid which generated an IPI.  Inspect
- * that nasid to determine if its partition needs to be activated or
- * deactivated.
- *
- * A partition is consider "awaiting activation" if our partition
- * flags indicate it is not active and it has a heartbeat.  A
- * partition is considered "awaiting deactivation" if our partition
- * flags indicate it is active but it has no heartbeat or it is not
- * sending its heartbeat to us.
- *
- * To determine the heartbeat, the remote nasid must have a properly
- * initialized reserved page.
- */
-static void
-xpc_identify_act_IRQ_req(int nasid)
-{
-	struct xpc_rsvd_page *remote_rp;
-	struct xpc_vars *remote_vars;
-	u64 remote_rp_pa;
-	u64 remote_vars_pa;
-	int remote_rp_version;
-	int reactivate = 0;
-	int stamp_diff;
-	struct timespec remote_rp_stamp = { 0, 0 };
-	short partid;
-	struct xpc_partition *part;
-	enum xp_retval ret;
-
-	/* pull over the reserved page structure */
-
-	remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer;
-
-	ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
-	if (ret != xpSuccess) {
-		dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
-			 "which sent interrupt, reason=%d\n", nasid, ret);
-		return;
-	}
-
-	remote_vars_pa = remote_rp->vars_pa;
-	remote_rp_version = remote_rp->version;
-	if (XPC_SUPPORTS_RP_STAMP(remote_rp_version))
-		remote_rp_stamp = remote_rp->stamp;
-
-	partid = remote_rp->partid;
-	part = &xpc_partitions[partid];
-
-	/* pull over the cross partition variables */
-
-	remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
-
-	ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
-	if (ret != xpSuccess) {
-
-		dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
-			 "which sent interrupt, reason=%d\n", nasid, ret);
-
-		XPC_DEACTIVATE_PARTITION(part, ret);
-		return;
-	}
-
-	part->act_IRQ_rcvd++;
-
-	dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
-		"%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd,
-		remote_vars->heartbeat, remote_vars->heartbeating_to_mask);
-
-	if (xpc_partition_disengaged(part) &&
-	    part->act_state == XPC_P_INACTIVE) {
-
-		xpc_update_partition_info(part, remote_rp_version,
-					  &remote_rp_stamp, remote_rp_pa,
-					  remote_vars_pa, remote_vars);
-
-		if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
-			if (xpc_partition_disengage_requested(1UL << partid)) {
-				/*
-				 * Other side is waiting on us to disengage,
-				 * even though we already have.
-				 */
-				return;
-			}
-		} else {
-			/* other side doesn't support disengage requests */
-			xpc_clear_partition_disengage_request(1UL << partid);
-		}
-
-		xpc_activate_partition(part);
-		return;
-	}
-
-	DBUG_ON(part->remote_rp_version == 0);
-	DBUG_ON(part->remote_vars_version == 0);
-
-	if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) {
-		DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part->
-						       remote_vars_version));
-
-		if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
-			DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
-							       version));
-			/* see if the other side rebooted */
-			if (part->remote_amos_page_pa ==
-			    remote_vars->amos_page_pa &&
-			    xpc_hb_allowed(sn_partition_id, remote_vars)) {
-				/* doesn't look that way, so ignore the IPI */
-				return;
-			}
-		}
-
-		/*
-		 * Other side rebooted and previous XPC didn't support the
-		 * disengage request, so we don't need to do anything special.
-		 */
-
-		xpc_update_partition_info(part, remote_rp_version,
-					  &remote_rp_stamp, remote_rp_pa,
-					  remote_vars_pa, remote_vars);
-		part->reactivate_nasid = nasid;
-		XPC_DEACTIVATE_PARTITION(part, xpReactivating);
-		return;
-	}
-
-	DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version));
-
-	if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
-		DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
-
-		/*
-		 * Other side rebooted and previous XPC did support the
-		 * disengage request, but the new one doesn't.
-		 */
-
-		xpc_clear_partition_engaged(1UL << partid);
-		xpc_clear_partition_disengage_request(1UL << partid);
-
-		xpc_update_partition_info(part, remote_rp_version,
-					  &remote_rp_stamp, remote_rp_pa,
-					  remote_vars_pa, remote_vars);
-		reactivate = 1;
-
-	} else {
-		DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
-
-		stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp,
-						&remote_rp_stamp);
-		if (stamp_diff != 0) {
-			DBUG_ON(stamp_diff >= 0);
-
-			/*
-			 * Other side rebooted and the previous XPC did support
-			 * the disengage request, as does the new one.
-			 */
-
-			DBUG_ON(xpc_partition_engaged(1UL << partid));
-			DBUG_ON(xpc_partition_disengage_requested(1UL <<
-								  partid));
-
-			xpc_update_partition_info(part, remote_rp_version,
-						  &remote_rp_stamp,
-						  remote_rp_pa, remote_vars_pa,
-						  remote_vars);
-			reactivate = 1;
-		}
-	}
-
-	if (part->disengage_request_timeout > 0 &&
-	    !xpc_partition_disengaged(part)) {
-		/* still waiting on other side to disengage from us */
-		return;
-	}
-
-	if (reactivate) {
-		part->reactivate_nasid = nasid;
-		XPC_DEACTIVATE_PARTITION(part, xpReactivating);
-
-	} else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
-		   xpc_partition_disengage_requested(1UL << partid)) {
-		XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
+	/* check that both remote and local partids are valid for each side */
+	if (remote_rp->SAL_partid < 0 ||
+	    remote_rp->SAL_partid >= xp_max_npartitions ||
+	    remote_rp->max_npartitions <= xp_partition_id) {
+		return xpInvalidPartid;
 	}
-}
 
-/*
- * Loop through the activation AMO variables and process any bits
- * which are set.  Each bit indicates a nasid sending a partition
- * activation or deactivation request.
- *
- * Return #of IRQs detected.
- */
-int
-xpc_identify_act_IRQ_sender(void)
-{
-	int word, bit;
-	u64 nasid_mask;
-	u64 nasid;		/* remote nasid */
-	int n_IRQs_detected = 0;
-	AMO_t *act_amos;
-
-	act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS;
-
-	/* scan through act AMO variable looking for non-zero entries */
-	for (word = 0; word < xp_nasid_mask_words; word++) {
-
-		if (xpc_exiting)
-			break;
-
-		nasid_mask = xpc_IPI_receive(&act_amos[word]);
-		if (nasid_mask == 0) {
-			/* no IRQs from nasids in this variable */
-			continue;
-		}
-
-		dev_dbg(xpc_part, "AMO[%d] gave back 0x%lx\n", word,
-			nasid_mask);
-
-		/*
-		 * If this nasid has been added to the machine since
-		 * our partition was reset, this will retain the
-		 * remote nasid in our reserved pages machine mask.
-		 * This is used in the event of module reload.
-		 */
-		xpc_mach_nasids[word] |= nasid_mask;
-
-		/* locate the nasid(s) which sent interrupts */
+	if (remote_rp->SAL_partid == xp_partition_id)
+		return xpLocalPartid;
 
-		for (bit = 0; bit < (8 * sizeof(u64)); bit++) {
-			if (nasid_mask & (1UL << bit)) {
-				n_IRQs_detected++;
-				nasid = XPC_NASID_FROM_W_B(word, bit);
-				dev_dbg(xpc_part, "interrupt from nasid %ld\n",
-					nasid);
-				xpc_identify_act_IRQ_req(nasid);
-			}
-		}
-	}
-	return n_IRQs_detected;
+	return xpSuccess;
 }
 
 /*
- * See if the other side has responded to a partition disengage request
- * from us.
+ * See if the other side has responded to a partition deactivate request
+ * from us. Though we requested the remote partition to deactivate with regard
+ * to us, we really only need to wait for the other side to disengage from us.
  */
 int
 xpc_partition_disengaged(struct xpc_partition *part)
@@ -828,41 +264,37 @@ xpc_partition_disengaged(struct xpc_partition *part)
 	short partid = XPC_PARTID(part);
 	int disengaged;
 
-	disengaged = (xpc_partition_engaged(1UL << partid) == 0);
-	if (part->disengage_request_timeout) {
+	disengaged = !xpc_partition_engaged(partid);
+	if (part->disengage_timeout) {
 		if (!disengaged) {
-			if (time_before(jiffies,
-			    part->disengage_request_timeout)) {
+			if (time_is_after_jiffies(part->disengage_timeout)) {
 				/* timelimit hasn't been reached yet */
 				return 0;
 			}
 
 			/*
-			 * Other side hasn't responded to our disengage
+			 * Other side hasn't responded to our deactivate
 			 * request in a timely fashion, so assume it's dead.
 			 */
 
-			dev_info(xpc_part, "disengage from remote partition %d "
-				 "timed out\n", partid);
-			xpc_disengage_request_timedout = 1;
-			xpc_clear_partition_engaged(1UL << partid);
+			dev_info(xpc_part, "deactivate request to remote "
+				 "partition %d timed out\n", partid);
+			xpc_disengage_timedout = 1;
+			xpc_assume_partition_disengaged(partid);
 			disengaged = 1;
 		}
-		part->disengage_request_timeout = 0;
+		part->disengage_timeout = 0;
 
 		/* cancel the timer function, provided it's not us */
-		if (!in_interrupt()) {
-			del_singleshot_timer_sync(&part->
-						  disengage_request_timer);
-		}
+		if (!in_interrupt())
+			del_singleshot_timer_sync(&part->disengage_timer);
 
-		DBUG_ON(part->act_state != XPC_P_DEACTIVATING &&
-			part->act_state != XPC_P_INACTIVE);
-		if (part->act_state != XPC_P_INACTIVE)
+		DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING &&
+			part->act_state != XPC_P_AS_INACTIVE);
+		if (part->act_state != XPC_P_AS_INACTIVE)
 			xpc_wakeup_channel_mgr(part);
 
-		if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version))
-			xpc_cancel_partition_disengage_request(part);
+		xpc_cancel_partition_deactivation_request(part);
 	}
 	return disengaged;
 }
@@ -879,8 +311,8 @@ xpc_mark_partition_active(struct xpc_partition *part)
 	dev_dbg(xpc_part, "setting partition %d to ACTIVE\n", XPC_PARTID(part));
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
-	if (part->act_state == XPC_P_ACTIVATING) {
-		part->act_state = XPC_P_ACTIVE;
+	if (part->act_state == XPC_P_AS_ACTIVATING) {
+		part->act_state = XPC_P_AS_ACTIVE;
 		ret = xpSuccess;
 	} else {
 		DBUG_ON(part->reason == xpSuccess);
@@ -892,7 +324,7 @@ xpc_mark_partition_active(struct xpc_partition *part)
 }
 
 /*
- * Notify XPC that the partition is down.
+ * Start the process of deactivating the specified partition.
  */
 void
 xpc_deactivate_partition(const int line, struct xpc_partition *part,
@@ -902,16 +334,16 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
 
-	if (part->act_state == XPC_P_INACTIVE) {
+	if (part->act_state == XPC_P_AS_INACTIVE) {
 		XPC_SET_REASON(part, reason, line);
 		spin_unlock_irqrestore(&part->act_lock, irq_flags);
 		if (reason == xpReactivating) {
 			/* we interrupt ourselves to reactivate partition */
-			xpc_IPI_send_reactivate(part);
+			xpc_request_partition_reactivation(part);
 		}
 		return;
 	}
-	if (part->act_state == XPC_P_DEACTIVATING) {
+	if (part->act_state == XPC_P_AS_DEACTIVATING) {
 		if ((part->reason == xpUnloading && reason != xpUnloading) ||
 		    reason == xpReactivating) {
 			XPC_SET_REASON(part, reason, line);
@@ -920,22 +352,18 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 		return;
 	}
 
-	part->act_state = XPC_P_DEACTIVATING;
+	part->act_state = XPC_P_AS_DEACTIVATING;
 	XPC_SET_REASON(part, reason, line);
 
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
-	if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
-		xpc_request_partition_disengage(part);
-		xpc_IPI_send_disengage(part);
+	/* ask remote partition to deactivate with regard to us */
+	xpc_request_partition_deactivation(part);
 
-		/* set a timelimit on the disengage request */
-		part->disengage_request_timeout = jiffies +
-		    (xpc_disengage_request_timelimit * HZ);
-		part->disengage_request_timer.expires =
-		    part->disengage_request_timeout;
-		add_timer(&part->disengage_request_timer);
-	}
+	/* set a timelimit on the disengage phase of the deactivation request */
+	part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ);
+	part->disengage_timer.expires = part->disengage_timeout;
+	add_timer(&part->disengage_timer);
 
 	dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n",
 		XPC_PARTID(part), reason);
@@ -955,7 +383,7 @@ xpc_mark_partition_inactive(struct xpc_partition *part)
 		XPC_PARTID(part));
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
-	part->act_state = XPC_P_INACTIVE;
+	part->act_state = XPC_P_AS_INACTIVE;
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 	part->remote_rp_pa = 0;
 }
@@ -974,28 +402,22 @@ xpc_discovery(void)
 {
 	void *remote_rp_base;
 	struct xpc_rsvd_page *remote_rp;
-	struct xpc_vars *remote_vars;
-	u64 remote_rp_pa;
-	u64 remote_vars_pa;
+	unsigned long remote_rp_pa;
 	int region;
 	int region_size;
 	int max_regions;
 	int nasid;
 	struct xpc_rsvd_page *rp;
-	short partid;
-	struct xpc_partition *part;
-	u64 *discovered_nasids;
+	unsigned long *discovered_nasids;
 	enum xp_retval ret;
 
 	remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
-						  xp_nasid_mask_bytes,
+						  xpc_nasid_mask_nbytes,
 						  GFP_KERNEL, &remote_rp_base);
 	if (remote_rp == NULL)
 		return;
 
-	remote_vars = (struct xpc_vars *)remote_rp;
-
-	discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words,
+	discovered_nasids = kzalloc(sizeof(long) * xpc_nasid_mask_nlongs,
 				    GFP_KERNEL);
 	if (discovered_nasids == NULL) {
 		kfree(remote_rp_base);
@@ -1010,7 +432,7 @@ xpc_discovery(void)
 	 * protection is in regards to memory, IOI and IPI.
 	 */
 	max_regions = 64;
-	region_size = sn_region_size;
+	region_size = xp_region_size;
 
 	switch (region_size) {
 	case 128:
@@ -1038,28 +460,28 @@ xpc_discovery(void)
 
 			dev_dbg(xpc_part, "checking nasid %d\n", nasid);
 
-			if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) {
+			if (test_bit(nasid / 2, xpc_part_nasids)) {
 				dev_dbg(xpc_part, "PROM indicates Nasid %d is "
 					"part of the local partition; skipping "
 					"region\n", nasid);
 				break;
 			}
 
-			if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) {
+			if (!(test_bit(nasid / 2, xpc_mach_nasids))) {
 				dev_dbg(xpc_part, "PROM indicates Nasid %d was "
 					"not on Numa-Link network at reset\n",
 					nasid);
 				continue;
 			}
 
-			if (XPC_NASID_IN_ARRAY(nasid, discovered_nasids)) {
+			if (test_bit(nasid / 2, discovered_nasids)) {
 				dev_dbg(xpc_part, "Nasid %d is part of a "
 					"partition which was previously "
 					"discovered\n", nasid);
 				continue;
 			}
 
-			/* pull over the reserved page structure */
+			/* pull over the rsvd page header & part_nasids mask */
 
 			ret = xpc_get_remote_rp(nasid, discovered_nasids,
 						remote_rp, &remote_rp_pa);
@@ -1074,72 +496,8 @@ xpc_discovery(void)
 				continue;
 			}
 
-			remote_vars_pa = remote_rp->vars_pa;
-
-			partid = remote_rp->partid;
-			part = &xpc_partitions[partid];
-
-			/* pull over the cross partition variables */
-
-			ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
-			if (ret != xpSuccess) {
-				dev_dbg(xpc_part, "unable to get XPC variables "
-					"from nasid %d, reason=%d\n", nasid,
-					ret);
-
-				XPC_DEACTIVATE_PARTITION(part, ret);
-				continue;
-			}
-
-			if (part->act_state != XPC_P_INACTIVE) {
-				dev_dbg(xpc_part, "partition %d on nasid %d is "
-					"already activating\n", partid, nasid);
-				break;
-			}
-
-			/*
-			 * Register the remote partition's AMOs with SAL so it
-			 * can handle and cleanup errors within that address
-			 * range should the remote partition go down. We don't
-			 * unregister this range because it is difficult to
-			 * tell when outstanding writes to the remote partition
-			 * are finished and thus when it is thus safe to
-			 * unregister. This should not result in wasted space
-			 * in the SAL xp_addr_region table because we should
-			 * get the same page for remote_act_amos_pa after
-			 * module reloads and system reboots.
-			 */
-			if (sn_register_xp_addr_region
-			    (remote_vars->amos_page_pa, PAGE_SIZE, 1) < 0) {
-				dev_dbg(xpc_part,
-					"partition %d failed to "
-					"register xp_addr region 0x%016lx\n",
-					partid, remote_vars->amos_page_pa);
-
-				XPC_SET_REASON(part, xpPhysAddrRegFailed,
-					       __LINE__);
-				break;
-			}
-
-			/*
-			 * The remote nasid is valid and available.
-			 * Send an interrupt to that nasid to notify
-			 * it that we are ready to begin activation.
-			 */
-			dev_dbg(xpc_part, "sending an interrupt to AMO 0x%lx, "
-				"nasid %d, phys_cpuid 0x%x\n",
-				remote_vars->amos_page_pa,
-				remote_vars->act_nasid,
-				remote_vars->act_phys_cpuid);
-
-			if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
-							   version)) {
-				part->remote_amos_page_pa =
-				    remote_vars->amos_page_pa;
-				xpc_mark_partition_disengaged(part);
-				xpc_cancel_partition_disengage_request(part);
-			}
-			xpc_IPI_send_activate(remote_vars);
+			xpc_request_partition_activation(remote_rp,
+							 remote_rp_pa, nasid);
 		}
 	}
 
@@ -1155,20 +513,16 @@ enum xp_retval
 xpc_initiate_partid_to_nasids(short partid, void *nasid_mask)
 {
 	struct xpc_partition *part;
-	u64 part_nasid_pa;
-	int bte_res;
+	unsigned long part_nasid_pa;
 
 	part = &xpc_partitions[partid];
 	if (part->remote_rp_pa == 0)
 		return xpPartitionDown;
 
-	memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
-
-	part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa);
+	memset(nasid_mask, 0, xpc_nasid_mask_nbytes);
 
-	bte_res = xp_bte_copy(part_nasid_pa, (u64)nasid_mask,
-			      xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE),
-			      NULL);
+	part_nasid_pa = (unsigned long)XPC_RP_PART_NASIDS(part->remote_rp_pa);
 
-	return xpc_map_bte_errors(bte_res);
+	return xp_remote_memcpy(xp_pa(nasid_mask), part_nasid_pa,
+				xpc_nasid_mask_nbytes);
 }
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
new file mode 100644
index 00000000000..b4882ccf634
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -0,0 +1,2404 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition Communication (XPC) sn2-based functions.
+ *
+ *     Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/delay.h>
+#include <asm/uncached.h>
+#include <asm/sn/mspec.h>
+#include <asm/sn/sn_sal.h>
+#include "xpc.h"
+
+/*
+ * Define the number of u64s required to represent all the C-brick nasids
+ * as a bitmap.  The cross-partition kernel modules deal only with
+ * C-brick nasids, thus the need for bitmaps which don't account for
+ * odd-numbered (non C-brick) nasids.
+ */
+#define XPC_MAX_PHYSNODES_SN2	(MAX_NUMALINK_NODES / 2)
+#define XP_NASID_MASK_BYTES_SN2	((XPC_MAX_PHYSNODES_SN2 + 7) / 8)
+#define XP_NASID_MASK_WORDS_SN2	((XPC_MAX_PHYSNODES_SN2 + 63) / 64)
+
+/*
+ * Memory for XPC's amo variables is allocated by the MSPEC driver. These
+ * pages are located in the lowest granule. The lowest granule uses 4k pages
+ * for cached references and an alternate TLB handler to never provide a
+ * cacheable mapping for the entire region. This will prevent speculative
+ * reading of cached copies of our lines from being issued which will cause
+ * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
+ * amo variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of
+ * NOTIFY IRQs, 128 amo variables (based on XP_NASID_MASK_WORDS_SN2) to identify
+ * the senders of ACTIVATE IRQs, 1 amo variable to identify which remote
+ * partitions (i.e., XPCs) consider themselves currently engaged with the
+ * local XPC and 1 amo variable to request partition deactivation.
+ */
+#define XPC_NOTIFY_IRQ_AMOS_SN2		0
+#define XPC_ACTIVATE_IRQ_AMOS_SN2	(XPC_NOTIFY_IRQ_AMOS_SN2 + \
+					 XP_MAX_NPARTITIONS_SN2)
+#define XPC_ENGAGED_PARTITIONS_AMO_SN2	(XPC_ACTIVATE_IRQ_AMOS_SN2 + \
+					 XP_NASID_MASK_WORDS_SN2)
+#define XPC_DEACTIVATE_REQUEST_AMO_SN2	(XPC_ENGAGED_PARTITIONS_AMO_SN2 + 1)
+
+/*
+ * Buffer used to store a local copy of portions of a remote partition's
+ * reserved page (either its header and part_nasids mask, or its vars).
+ */
+static void *xpc_remote_copy_buffer_base_sn2;
+static char *xpc_remote_copy_buffer_sn2;
+
+static struct xpc_vars_sn2 *xpc_vars_sn2;
+static struct xpc_vars_part_sn2 *xpc_vars_part_sn2;
+
+static int
+xpc_setup_partitions_sn_sn2(void)
+{
+	/* nothing needs to be done */
+	return 0;
+}
+
+/* SH_IPI_ACCESS shub register value on startup */
+static u64 xpc_sh1_IPI_access_sn2;
+static u64 xpc_sh2_IPI_access0_sn2;
+static u64 xpc_sh2_IPI_access1_sn2;
+static u64 xpc_sh2_IPI_access2_sn2;
+static u64 xpc_sh2_IPI_access3_sn2;
+
+/*
+ * Change protections to allow IPI operations.
+ */
+static void
+xpc_allow_IPI_ops_sn2(void)
+{
+	int node;
+	int nasid;
+
+	/* !!! The following should get moved into SAL. */
+	if (is_shub2()) {
+		xpc_sh2_IPI_access0_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
+		xpc_sh2_IPI_access1_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
+		xpc_sh2_IPI_access2_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
+		xpc_sh2_IPI_access3_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
+
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+			      -1UL);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+			      -1UL);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+			      -1UL);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+			      -1UL);
+		}
+	} else {
+		xpc_sh1_IPI_access_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
+
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+			      -1UL);
+		}
+	}
+}
+
+/*
+ * Restrict protections to disallow IPI operations.
+ */
+static void
+xpc_disallow_IPI_ops_sn2(void)
+{
+	int node;
+	int nasid;
+
+	/* !!! The following should get moved into SAL. */
+	if (is_shub2()) {
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+			      xpc_sh2_IPI_access0_sn2);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+			      xpc_sh2_IPI_access1_sn2);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+			      xpc_sh2_IPI_access2_sn2);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+			      xpc_sh2_IPI_access3_sn2);
+		}
+	} else {
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+			      xpc_sh1_IPI_access_sn2);
+		}
+	}
+}
+
+/*
+ * The following set of functions are used for the sending and receiving of
+ * IRQs (also known as IPIs). There are two flavors of IRQs, one that is
+ * associated with partition activity (SGI_XPC_ACTIVATE) and the other that
+ * is associated with channel activity (SGI_XPC_NOTIFY).
+ */
+
+static u64
+xpc_receive_IRQ_amo_sn2(struct amo *amo)
+{
+	return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
+}
+
+static enum xp_retval
+xpc_send_IRQ_sn2(struct amo *amo, u64 flag, int nasid, int phys_cpuid,
+		 int vector)
+{
+	int ret = 0;
+	unsigned long irq_flags;
+
+	local_irq_save(irq_flags);
+
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag);
+	sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+
+	return (ret == 0) ? xpSuccess : xpPioReadError;
+}
+
+static struct amo *
+xpc_init_IRQ_amo_sn2(int index)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page + index;
+
+	(void)xpc_receive_IRQ_amo_sn2(amo);	/* clear amo variable */
+	return amo;
+}
+
+/*
+ * Functions associated with SGI_XPC_ACTIVATE IRQ.
+ */
+
+/*
+ * Notify the heartbeat check thread that an activate IRQ has been received.
+ */
+static irqreturn_t
+xpc_handle_activate_IRQ_sn2(int irq, void *dev_id)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	xpc_activate_IRQ_rcvd++;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Flag the appropriate amo variable and send an IRQ to the specified node.
+ */
+static void
+xpc_send_activate_IRQ_sn2(unsigned long amos_page_pa, int from_nasid,
+			  int to_nasid, int to_phys_cpuid)
+{
+	struct amo *amos = (struct amo *)__va(amos_page_pa +
+					      (XPC_ACTIVATE_IRQ_AMOS_SN2 *
+					      sizeof(struct amo)));
+
+	(void)xpc_send_IRQ_sn2(&amos[BIT_WORD(from_nasid / 2)],
+			       BIT_MASK(from_nasid / 2), to_nasid,
+			       to_phys_cpuid, SGI_XPC_ACTIVATE);
+}
+
+static void
+xpc_send_local_activate_IRQ_sn2(int from_nasid)
+{
+	unsigned long irq_flags;
+	struct amo *amos = (struct amo *)__va(xpc_vars_sn2->amos_page_pa +
+					      (XPC_ACTIVATE_IRQ_AMOS_SN2 *
+					      sizeof(struct amo)));
+
+	/* fake the sending and receipt of an activate IRQ from remote nasid */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amos[BIT_WORD(from_nasid / 2)].variable),
+			 FETCHOP_OR, BIT_MASK(from_nasid / 2));
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	xpc_activate_IRQ_rcvd++;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
+}
+
+/*
+ * Functions associated with SGI_XPC_NOTIFY IRQ.
+ */
+
+/*
+ * Check to see if any chctl flags were sent from the specified partition.
+ */
+static void
+xpc_check_for_sent_chctl_flags_sn2(struct xpc_partition *part)
+{
+	union xpc_channel_ctl_flags chctl;
+	unsigned long irq_flags;
+
+	chctl.all_flags = xpc_receive_IRQ_amo_sn2(part->sn.sn2.
+						  local_chctl_amo_va);
+	if (chctl.all_flags == 0)
+		return;
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	part->chctl.all_flags |= chctl.all_flags;
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+	dev_dbg(xpc_chan, "received notify IRQ from partid=%d, chctl.all_flags="
+		"0x%lx\n", XPC_PARTID(part), chctl.all_flags);
+
+	xpc_wakeup_channel_mgr(part);
+}
+
+/*
+ * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
+ * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
+ * than one partition, we use an amo structure per partition to indicate
+ * whether a partition has sent an IRQ or not.  If it has, then wake up the
+ * associated kthread to handle it.
+ *
+ * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IRQs sent by XPC
+ * running on other partitions.
+ *
+ * Noteworthy Arguments:
+ *
+ *	irq - Interrupt ReQuest number. NOT USED.
+ *
+ *	dev_id - partid of IRQ's potential sender.
+ */
+static irqreturn_t
+xpc_handle_notify_IRQ_sn2(int irq, void *dev_id)
+{
+	short partid = (short)(u64)dev_id;
+	struct xpc_partition *part = &xpc_partitions[partid];
+
+	DBUG_ON(partid < 0 || partid >= XP_MAX_NPARTITIONS_SN2);
+
+	if (xpc_part_ref(part)) {
+		xpc_check_for_sent_chctl_flags_sn2(part);
+
+		xpc_part_deref(part);
+	}
+	return IRQ_HANDLED;
+}
+
+/*
+ * Check to see if xpc_handle_notify_IRQ_sn2() dropped any IRQs on the floor
+ * because the write to their associated amo variable completed after the IRQ
+ * was received.
+ */
+static void
+xpc_check_for_dropped_notify_IRQ_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+
+	if (xpc_part_ref(part)) {
+		xpc_check_for_sent_chctl_flags_sn2(part);
+
+		part_sn2->dropped_notify_IRQ_timer.expires = jiffies +
+		    XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL;
+		add_timer(&part_sn2->dropped_notify_IRQ_timer);
+		xpc_part_deref(part);
+	}
+}
+
+/*
+ * Send a notify IRQ to the remote partition that is associated with the
+ * specified channel.
+ */
+static void
+xpc_send_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag,
+			char *chctl_flag_string, unsigned long *irq_flags)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	union xpc_channel_ctl_flags chctl = { 0 };
+	enum xp_retval ret;
+
+	if (likely(part->act_state != XPC_P_AS_DEACTIVATING)) {
+		chctl.flags[ch->number] = chctl_flag;
+		ret = xpc_send_IRQ_sn2(part_sn2->remote_chctl_amo_va,
+				       chctl.all_flags,
+				       part_sn2->notify_IRQ_nasid,
+				       part_sn2->notify_IRQ_phys_cpuid,
+				       SGI_XPC_NOTIFY);
+		dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
+			chctl_flag_string, ch->partid, ch->number, ret);
+		if (unlikely(ret != xpSuccess)) {
+			if (irq_flags != NULL)
+				spin_unlock_irqrestore(&ch->lock, *irq_flags);
+			XPC_DEACTIVATE_PARTITION(part, ret);
+			if (irq_flags != NULL)
+				spin_lock_irqsave(&ch->lock, *irq_flags);
+		}
+	}
+}
+
+#define XPC_SEND_NOTIFY_IRQ_SN2(_ch, _ipi_f, _irq_f) \
+		xpc_send_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f, _irq_f)
+
+/*
+ * Make it look like the remote partition, which is associated with the
+ * specified channel, sent us a notify IRQ. This faked IRQ will be handled
+ * by xpc_check_for_dropped_notify_IRQ_sn2().
+ */
+static void
+xpc_send_local_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag,
+			      char *chctl_flag_string)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
+	union xpc_channel_ctl_flags chctl = { 0 };
+
+	chctl.flags[ch->number] = chctl_flag;
+	FETCHOP_STORE_OP(TO_AMO((u64)&part->sn.sn2.local_chctl_amo_va->
+				variable), FETCHOP_OR, chctl.all_flags);
+	dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
+		chctl_flag_string, ch->partid, ch->number);
+}
+
+#define XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(_ch, _ipi_f) \
+		xpc_send_local_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f)
+
+static void
+xpc_send_chctl_closerequest_sn2(struct xpc_channel *ch,
+				unsigned long *irq_flags)
+{
+	struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+	args->reason = ch->reason;
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREQUEST, irq_flags);
+}
+
+static void
+xpc_send_chctl_closereply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREPLY, irq_flags);
+}
+
+static void
+xpc_send_chctl_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+	args->entry_size = ch->entry_size;
+	args->local_nentries = ch->local_nentries;
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREQUEST, irq_flags);
+}
+
+static void
+xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+	args->remote_nentries = ch->remote_nentries;
+	args->local_nentries = ch->local_nentries;
+	args->local_msgqueue_pa = xp_pa(ch->sn.sn2.local_msgqueue);
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags);
+}
+
+static void
+xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch)
+{
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST, NULL);
+}
+
+static void
+xpc_send_chctl_local_msgrequest_sn2(struct xpc_channel *ch)
+{
+	XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST);
+}
+
+static void
+xpc_save_remote_msgqueue_pa_sn2(struct xpc_channel *ch,
+				unsigned long msgqueue_pa)
+{
+	ch->sn.sn2.remote_msgqueue_pa = msgqueue_pa;
+}
+
+/*
+ * This next set of functions are used to keep track of when a partition is
+ * potentially engaged in accessing memory belonging to another partition.
+ */
+
+static void
+xpc_indicate_partition_engaged_sn2(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa +
+					     (XPC_ENGAGED_PARTITIONS_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* set bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
+			 BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static void
+xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa +
+					     (XPC_ENGAGED_PARTITIONS_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* clear bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+			 ~BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+
+	/*
+	 * Send activate IRQ to get other side to see that we've cleared our
+	 * bit in their engaged partitions amo.
+	 */
+	xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+				  cnodeid_to_nasid(0),
+				  part_sn2->activate_IRQ_nasid,
+				  part_sn2->activate_IRQ_phys_cpuid);
+}
+
+static void
+xpc_assume_partition_disengaged_sn2(short partid)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+	/* clear bit(s) based on partid mask in our partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+			 ~BIT(partid));
+}
+
+static int
+xpc_partition_engaged_sn2(short partid)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+	/* our partition's amo variable ANDed with partid mask */
+	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
+		BIT(partid)) != 0;
+}
+
+static int
+xpc_any_partition_engaged_sn2(void)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+	/* our partition's amo variable */
+	return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0;
+}
+
+/* original protection values for each node */
+static u64 xpc_prot_vec_sn2[MAX_NUMNODES];
+
+/*
+ * Change protections to allow amo operations on non-Shub 1.1 systems.
+ */
+static enum xp_retval
+xpc_allow_amo_ops_sn2(struct amo *amos_page)
+{
+	u64 nasid_array = 0;
+	int ret;
+
+	/*
+	 * On SHUB 1.1, we cannot call sn_change_memprotect() since the BIST
+	 * collides with memory operations. On those systems we call
+	 * xpc_allow_amo_ops_shub_wars_1_1_sn2() instead.
+	 */
+	if (!enable_shub_wars_1_1()) {
+		ret = sn_change_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE,
+					   SN_MEMPROT_ACCESS_CLASS_1,
+					   &nasid_array);
+		if (ret != 0)
+			return xpSalError;
+	}
+	return xpSuccess;
+}
+
+/*
+ * Change protections to allow amo operations on Shub 1.1 systems.
+ */
+static void
+xpc_allow_amo_ops_shub_wars_1_1_sn2(void)
+{
+	int node;
+	int nasid;
+
+	if (!enable_shub_wars_1_1())
+		return;
+
+	for_each_online_node(node) {
+		nasid = cnodeid_to_nasid(node);
+		/* save current protection values */
+		xpc_prot_vec_sn2[node] =
+		    (u64)HUB_L((u64 *)GLOBAL_MMR_ADDR(nasid,
+						  SH1_MD_DQLP_MMR_DIR_PRIVEC0));
+		/* open up everything */
+		HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+					     SH1_MD_DQLP_MMR_DIR_PRIVEC0),
+		      -1UL);
+		HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+					     SH1_MD_DQRP_MMR_DIR_PRIVEC0),
+		      -1UL);
+	}
+}
+
+static enum xp_retval
+xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa,
+				   size_t *len)
+{
+	s64 status;
+	enum xp_retval ret;
+
+	status = sn_partition_reserved_page_pa((u64)buf, cookie, rp_pa, len);
+	if (status == SALRET_OK)
+		ret = xpSuccess;
+	else if (status == SALRET_MORE_PASSES)
+		ret = xpNeedMoreInfo;
+	else
+		ret = xpSalError;
+
+	return ret;
+}
+
+
+static int
+xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
+{
+	struct amo *amos_page;
+	int i;
+	int ret;
+
+	xpc_vars_sn2 = XPC_RP_VARS(rp);
+
+	rp->sn.vars_pa = xp_pa(xpc_vars_sn2);
+
+	/* vars_part array follows immediately after vars */
+	xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) +
+							 XPC_RP_VARS_SIZE);
+
+	/*
+	 * Before clearing xpc_vars_sn2, see if a page of amos had been
+	 * previously allocated. If not we'll need to allocate one and set
+	 * permissions so that cross-partition amos are allowed.
+	 *
+	 * The allocated amo page needs MCA reporting to remain disabled after
+	 * XPC has unloaded.  To make this work, we keep a copy of the pointer
+	 * to this page (i.e., amos_page) in the struct xpc_vars_sn2 structure,
+	 * which is pointed to by the reserved page, and re-use that saved copy
+	 * on subsequent loads of XPC. This amo page is never freed, and its
+	 * memory protections are never restricted.
+	 */
+	amos_page = xpc_vars_sn2->amos_page;
+	if (amos_page == NULL) {
+		amos_page = (struct amo *)TO_AMO(uncached_alloc_page(0, 1));
+		if (amos_page == NULL) {
+			dev_err(xpc_part, "can't allocate page of amos\n");
+			return -ENOMEM;
+		}
+
+		/*
+		 * Open up amo-R/W to cpu.  This is done on Shub 1.1 systems
+		 * when xpc_allow_amo_ops_shub_wars_1_1_sn2() is called.
+		 */
+		ret = xpc_allow_amo_ops_sn2(amos_page);
+		if (ret != xpSuccess) {
+			dev_err(xpc_part, "can't allow amo operations\n");
+			uncached_free_page(__IA64_UNCACHED_OFFSET |
+					   TO_PHYS((u64)amos_page), 1);
+			return -EPERM;
+		}
+	}
+
+	/* clear xpc_vars_sn2 */
+	memset(xpc_vars_sn2, 0, sizeof(struct xpc_vars_sn2));
+
+	xpc_vars_sn2->version = XPC_V_VERSION;
+	xpc_vars_sn2->activate_IRQ_nasid = cpuid_to_nasid(0);
+	xpc_vars_sn2->activate_IRQ_phys_cpuid = cpu_physical_id(0);
+	xpc_vars_sn2->vars_part_pa = xp_pa(xpc_vars_part_sn2);
+	xpc_vars_sn2->amos_page_pa = ia64_tpa((u64)amos_page);
+	xpc_vars_sn2->amos_page = amos_page;	/* save for next load of XPC */
+
+	/* clear xpc_vars_part_sn2 */
+	memset((u64 *)xpc_vars_part_sn2, 0, sizeof(struct xpc_vars_part_sn2) *
+	       XP_MAX_NPARTITIONS_SN2);
+
+	/* initialize the activate IRQ related amo variables */
+	for (i = 0; i < xpc_nasid_mask_nlongs; i++)
+		(void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS_SN2 + i);
+
+	/* initialize the engaged remote partitions related amo variables */
+	(void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO_SN2);
+	(void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO_SN2);
+
+	return 0;
+}
+
+static void
+xpc_increment_heartbeat_sn2(void)
+{
+	xpc_vars_sn2->heartbeat++;
+}
+
+static void
+xpc_offline_heartbeat_sn2(void)
+{
+	xpc_increment_heartbeat_sn2();
+	xpc_vars_sn2->heartbeat_offline = 1;
+}
+
+static void
+xpc_online_heartbeat_sn2(void)
+{
+	xpc_increment_heartbeat_sn2();
+	xpc_vars_sn2->heartbeat_offline = 0;
+}
+
+static void
+xpc_heartbeat_init_sn2(void)
+{
+	DBUG_ON(xpc_vars_sn2 == NULL);
+
+	bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
+	xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0];
+	xpc_online_heartbeat_sn2();
+}
+
+static void
+xpc_heartbeat_exit_sn2(void)
+{
+	xpc_offline_heartbeat_sn2();
+}
+
+static enum xp_retval
+xpc_get_remote_heartbeat_sn2(struct xpc_partition *part)
+{
+	struct xpc_vars_sn2 *remote_vars;
+	enum xp_retval ret;
+
+	remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2;
+
+	/* pull the remote vars structure that contains the heartbeat */
+	ret = xp_remote_memcpy(xp_pa(remote_vars),
+			       part->sn.sn2.remote_vars_pa,
+			       XPC_RP_VARS_SIZE);
+	if (ret != xpSuccess)
+		return ret;
+
+	dev_dbg(xpc_part, "partid=%d, heartbeat=%ld, last_heartbeat=%ld, "
+		"heartbeat_offline=%ld, HB_mask[0]=0x%lx\n", XPC_PARTID(part),
+		remote_vars->heartbeat, part->last_heartbeat,
+		remote_vars->heartbeat_offline,
+		remote_vars->heartbeating_to_mask[0]);
+
+	if ((remote_vars->heartbeat == part->last_heartbeat &&
+	    remote_vars->heartbeat_offline == 0) ||
+	    !xpc_hb_allowed(sn_partition_id,
+			    &remote_vars->heartbeating_to_mask)) {
+		ret = xpNoHeartbeat;
+	} else {
+		part->last_heartbeat = remote_vars->heartbeat;
+	}
+
+	return ret;
+}
+
+/*
+ * Get a copy of the remote partition's XPC variables from the reserved page.
+ *
+ * remote_vars points to a buffer that is cacheline aligned for BTE copies and
+ * assumed to be of size XPC_RP_VARS_SIZE.
+ */
+static enum xp_retval
+xpc_get_remote_vars_sn2(unsigned long remote_vars_pa,
+			struct xpc_vars_sn2 *remote_vars)
+{
+	enum xp_retval ret;
+
+	if (remote_vars_pa == 0)
+		return xpVarsNotSet;
+
+	/* pull over the cross partition variables */
+	ret = xp_remote_memcpy(xp_pa(remote_vars), remote_vars_pa,
+			       XPC_RP_VARS_SIZE);
+	if (ret != xpSuccess)
+		return ret;
+
+	if (XPC_VERSION_MAJOR(remote_vars->version) !=
+	    XPC_VERSION_MAJOR(XPC_V_VERSION)) {
+		return xpBadVersion;
+	}
+
+	return xpSuccess;
+}
+
+static void
+xpc_request_partition_activation_sn2(struct xpc_rsvd_page *remote_rp,
+				     unsigned long remote_rp_pa, int nasid)
+{
+	xpc_send_local_activate_IRQ_sn2(nasid);
+}
+
+static void
+xpc_request_partition_reactivation_sn2(struct xpc_partition *part)
+{
+	xpc_send_local_activate_IRQ_sn2(part->sn.sn2.activate_IRQ_nasid);
+}
+
+static void
+xpc_request_partition_deactivation_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa +
+					     (XPC_DEACTIVATE_REQUEST_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* set bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
+			 BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+
+	/*
+	 * Send activate IRQ to get other side to see that we've set our
+	 * bit in their deactivate request amo.
+	 */
+	xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+				  cnodeid_to_nasid(0),
+				  part_sn2->activate_IRQ_nasid,
+				  part_sn2->activate_IRQ_phys_cpuid);
+}
+
+static void
+xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa +
+					     (XPC_DEACTIVATE_REQUEST_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* clear bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+			 ~BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static int
+xpc_partition_deactivation_requested_sn2(short partid)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_DEACTIVATE_REQUEST_AMO_SN2;
+
+	/* our partition's amo variable ANDed with partid mask */
+	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
+		BIT(partid)) != 0;
+}
+
+/*
+ * Update the remote partition's info.
+ */
+static void
+xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version,
+			      unsigned long *remote_rp_ts_jiffies,
+			      unsigned long remote_rp_pa,
+			      unsigned long remote_vars_pa,
+			      struct xpc_vars_sn2 *remote_vars)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+
+	part->remote_rp_version = remote_rp_version;
+	dev_dbg(xpc_part, "  remote_rp_version = 0x%016x\n",
+		part->remote_rp_version);
+
+	part->remote_rp_ts_jiffies = *remote_rp_ts_jiffies;
+	dev_dbg(xpc_part, "  remote_rp_ts_jiffies = 0x%016lx\n",
+		part->remote_rp_ts_jiffies);
+
+	part->remote_rp_pa = remote_rp_pa;
+	dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
+
+	part_sn2->remote_vars_pa = remote_vars_pa;
+	dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
+		part_sn2->remote_vars_pa);
+
+	part->last_heartbeat = remote_vars->heartbeat;
+	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
+		part->last_heartbeat);
+
+	part_sn2->remote_vars_part_pa = remote_vars->vars_part_pa;
+	dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
+		part_sn2->remote_vars_part_pa);
+
+	part_sn2->activate_IRQ_nasid = remote_vars->activate_IRQ_nasid;
+	dev_dbg(xpc_part, "  activate_IRQ_nasid = 0x%x\n",
+		part_sn2->activate_IRQ_nasid);
+
+	part_sn2->activate_IRQ_phys_cpuid =
+	    remote_vars->activate_IRQ_phys_cpuid;
+	dev_dbg(xpc_part, "  activate_IRQ_phys_cpuid = 0x%x\n",
+		part_sn2->activate_IRQ_phys_cpuid);
+
+	part_sn2->remote_amos_page_pa = remote_vars->amos_page_pa;
+	dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
+		part_sn2->remote_amos_page_pa);
+
+	part_sn2->remote_vars_version = remote_vars->version;
+	dev_dbg(xpc_part, "  remote_vars_version = 0x%x\n",
+		part_sn2->remote_vars_version);
+}
+
+/*
+ * Prior code has determined the nasid which generated a activate IRQ.
+ * Inspect that nasid to determine if its partition needs to be activated
+ * or deactivated.
+ *
+ * A partition is considered "awaiting activation" if our partition
+ * flags indicate it is not active and it has a heartbeat.  A
+ * partition is considered "awaiting deactivation" if our partition
+ * flags indicate it is active but it has no heartbeat or it is not
+ * sending its heartbeat to us.
+ *
+ * To determine the heartbeat, the remote nasid must have a properly
+ * initialized reserved page.
+ */
+static void
+xpc_identify_activate_IRQ_req_sn2(int nasid)
+{
+	struct xpc_rsvd_page *remote_rp;
+	struct xpc_vars_sn2 *remote_vars;
+	unsigned long remote_rp_pa;
+	unsigned long remote_vars_pa;
+	int remote_rp_version;
+	int reactivate = 0;
+	unsigned long remote_rp_ts_jiffies = 0;
+	short partid;
+	struct xpc_partition *part;
+	struct xpc_partition_sn2 *part_sn2;
+	enum xp_retval ret;
+
+	/* pull over the reserved page structure */
+
+	remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer_sn2;
+
+	ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
+	if (ret != xpSuccess) {
+		dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
+			 "which sent interrupt, reason=%d\n", nasid, ret);
+		return;
+	}
+
+	remote_vars_pa = remote_rp->sn.vars_pa;
+	remote_rp_version = remote_rp->version;
+	remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+
+	partid = remote_rp->SAL_partid;
+	part = &xpc_partitions[partid];
+	part_sn2 = &part->sn.sn2;
+
+	/* pull over the cross partition variables */
+
+	remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2;
+
+	ret = xpc_get_remote_vars_sn2(remote_vars_pa, remote_vars);
+	if (ret != xpSuccess) {
+		dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
+			 "which sent interrupt, reason=%d\n", nasid, ret);
+
+		XPC_DEACTIVATE_PARTITION(part, ret);
+		return;
+	}
+
+	part->activate_IRQ_rcvd++;
+
+	dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
+		"%ld:0x%lx\n", (int)nasid, (int)partid, part->activate_IRQ_rcvd,
+		remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]);
+
+	if (xpc_partition_disengaged(part) &&
+	    part->act_state == XPC_P_AS_INACTIVE) {
+
+		xpc_update_partition_info_sn2(part, remote_rp_version,
+					      &remote_rp_ts_jiffies,
+					      remote_rp_pa, remote_vars_pa,
+					      remote_vars);
+
+		if (xpc_partition_deactivation_requested_sn2(partid)) {
+			/*
+			 * Other side is waiting on us to deactivate even though
+			 * we already have.
+			 */
+			return;
+		}
+
+		xpc_activate_partition(part);
+		return;
+	}
+
+	DBUG_ON(part->remote_rp_version == 0);
+	DBUG_ON(part_sn2->remote_vars_version == 0);
+
+	if (remote_rp_ts_jiffies != part->remote_rp_ts_jiffies) {
+
+		/* the other side rebooted */
+
+		DBUG_ON(xpc_partition_engaged_sn2(partid));
+		DBUG_ON(xpc_partition_deactivation_requested_sn2(partid));
+
+		xpc_update_partition_info_sn2(part, remote_rp_version,
+					      &remote_rp_ts_jiffies,
+					      remote_rp_pa, remote_vars_pa,
+					      remote_vars);
+		reactivate = 1;
+	}
+
+	if (part->disengage_timeout > 0 && !xpc_partition_disengaged(part)) {
+		/* still waiting on other side to disengage from us */
+		return;
+	}
+
+	if (reactivate)
+		XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+	else if (xpc_partition_deactivation_requested_sn2(partid))
+		XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
+}
+
+/*
+ * Loop through the activation amo variables and process any bits
+ * which are set.  Each bit indicates a nasid sending a partition
+ * activation or deactivation request.
+ *
+ * Return #of IRQs detected.
+ */
+int
+xpc_identify_activate_IRQ_sender_sn2(void)
+{
+	int l;
+	int b;
+	unsigned long nasid_mask_long;
+	u64 nasid;		/* remote nasid */
+	int n_IRQs_detected = 0;
+	struct amo *act_amos;
+
+	act_amos = xpc_vars_sn2->amos_page + XPC_ACTIVATE_IRQ_AMOS_SN2;
+
+	/* scan through activate amo variables looking for non-zero entries */
+	for (l = 0; l < xpc_nasid_mask_nlongs; l++) {
+
+		if (xpc_exiting)
+			break;
+
+		nasid_mask_long = xpc_receive_IRQ_amo_sn2(&act_amos[l]);
+
+		b = find_first_bit(&nasid_mask_long, BITS_PER_LONG);
+		if (b >= BITS_PER_LONG) {
+			/* no IRQs from nasids in this amo variable */
+			continue;
+		}
+
+		dev_dbg(xpc_part, "amo[%d] gave back 0x%lx\n", l,
+			nasid_mask_long);
+
+		/*
+		 * If this nasid has been added to the machine since
+		 * our partition was reset, this will retain the
+		 * remote nasid in our reserved pages machine mask.
+		 * This is used in the event of module reload.
+		 */
+		xpc_mach_nasids[l] |= nasid_mask_long;
+
+		/* locate the nasid(s) which sent interrupts */
+
+		do {
+			n_IRQs_detected++;
+			nasid = (l * BITS_PER_LONG + b) * 2;
+			dev_dbg(xpc_part, "interrupt from nasid %ld\n", nasid);
+			xpc_identify_activate_IRQ_req_sn2(nasid);
+
+			b = find_next_bit(&nasid_mask_long, BITS_PER_LONG,
+					  b + 1);
+		} while (b < BITS_PER_LONG);
+	}
+	return n_IRQs_detected;
+}
+
+static void
+xpc_process_activate_IRQ_rcvd_sn2(void)
+{
+	unsigned long irq_flags;
+	int n_IRQs_expected;
+	int n_IRQs_detected;
+
+	DBUG_ON(xpc_activate_IRQ_rcvd == 0);
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	n_IRQs_expected = xpc_activate_IRQ_rcvd;
+	xpc_activate_IRQ_rcvd = 0;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	n_IRQs_detected = xpc_identify_activate_IRQ_sender_sn2();
+	if (n_IRQs_detected < n_IRQs_expected) {
+		/* retry once to help avoid missing amo */
+		(void)xpc_identify_activate_IRQ_sender_sn2();
+	}
+}
+
+/*
+ * Setup the channel structures that are sn2 specific.
+ */
+static enum xp_retval
+xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	struct xpc_channel_sn2 *ch_sn2;
+	enum xp_retval retval;
+	int ret;
+	int cpuid;
+	int ch_number;
+	struct timer_list *timer;
+	short partid = XPC_PARTID(part);
+
+	/* allocate all the required GET/PUT values */
+
+	part_sn2->local_GPs =
+	    xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL,
+					  &part_sn2->local_GPs_base);
+	if (part_sn2->local_GPs == NULL) {
+		dev_err(xpc_chan, "can't get memory for local get/put "
+			"values\n");
+		return xpNoMemory;
+	}
+
+	part_sn2->remote_GPs =
+	    xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL,
+					  &part_sn2->remote_GPs_base);
+	if (part_sn2->remote_GPs == NULL) {
+		dev_err(xpc_chan, "can't get memory for remote get/put "
+			"values\n");
+		retval = xpNoMemory;
+		goto out_1;
+	}
+
+	part_sn2->remote_GPs_pa = 0;
+
+	/* allocate all the required open and close args */
+
+	part_sn2->local_openclose_args =
+	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
+					  GFP_KERNEL, &part_sn2->
+					  local_openclose_args_base);
+	if (part_sn2->local_openclose_args == NULL) {
+		dev_err(xpc_chan, "can't get memory for local connect args\n");
+		retval = xpNoMemory;
+		goto out_2;
+	}
+
+	part_sn2->remote_openclose_args_pa = 0;
+
+	part_sn2->local_chctl_amo_va = xpc_init_IRQ_amo_sn2(partid);
+
+	part_sn2->notify_IRQ_nasid = 0;
+	part_sn2->notify_IRQ_phys_cpuid = 0;
+	part_sn2->remote_chctl_amo_va = NULL;
+
+	sprintf(part_sn2->notify_IRQ_owner, "xpc%02d", partid);
+	ret = request_irq(SGI_XPC_NOTIFY, xpc_handle_notify_IRQ_sn2,
+			  IRQF_SHARED, part_sn2->notify_IRQ_owner,
+			  (void *)(u64)partid);
+	if (ret != 0) {
+		dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
+			"errno=%d\n", -ret);
+		retval = xpLackOfResources;
+		goto out_3;
+	}
+
+	/* Setup a timer to check for dropped notify IRQs */
+	timer = &part_sn2->dropped_notify_IRQ_timer;
+	init_timer(timer);
+	timer->function =
+	    (void (*)(unsigned long))xpc_check_for_dropped_notify_IRQ_sn2;
+	timer->data = (unsigned long)part;
+	timer->expires = jiffies + XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL;
+	add_timer(timer);
+
+	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+		ch_sn2 = &part->channels[ch_number].sn.sn2;
+
+		ch_sn2->local_GP = &part_sn2->local_GPs[ch_number];
+		ch_sn2->local_openclose_args =
+		    &part_sn2->local_openclose_args[ch_number];
+
+		mutex_init(&ch_sn2->msg_to_pull_mutex);
+	}
+
+	/*
+	 * Setup the per partition specific variables required by the
+	 * remote partition to establish channel connections with us.
+	 *
+	 * The setting of the magic # indicates that these per partition
+	 * specific variables are ready to be used.
+	 */
+	xpc_vars_part_sn2[partid].GPs_pa = xp_pa(part_sn2->local_GPs);
+	xpc_vars_part_sn2[partid].openclose_args_pa =
+	    xp_pa(part_sn2->local_openclose_args);
+	xpc_vars_part_sn2[partid].chctl_amo_pa =
+	    xp_pa(part_sn2->local_chctl_amo_va);
+	cpuid = raw_smp_processor_id();	/* any CPU in this partition will do */
+	xpc_vars_part_sn2[partid].notify_IRQ_nasid = cpuid_to_nasid(cpuid);
+	xpc_vars_part_sn2[partid].notify_IRQ_phys_cpuid =
+	    cpu_physical_id(cpuid);
+	xpc_vars_part_sn2[partid].nchannels = part->nchannels;
+	xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC1_SN2;
+
+	return xpSuccess;
+
+	/* setup of ch structures failed */
+out_3:
+	kfree(part_sn2->local_openclose_args_base);
+	part_sn2->local_openclose_args = NULL;
+out_2:
+	kfree(part_sn2->remote_GPs_base);
+	part_sn2->remote_GPs = NULL;
+out_1:
+	kfree(part_sn2->local_GPs_base);
+	part_sn2->local_GPs = NULL;
+	return retval;
+}
+
+/*
+ * Teardown the channel structures that are sn2 specific.
+ */
+static void
+xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	short partid = XPC_PARTID(part);
+
+	/*
+	 * Indicate that the variables specific to the remote partition are no
+	 * longer available for its use.
+	 */
+	xpc_vars_part_sn2[partid].magic = 0;
+
+	/* in case we've still got outstanding timers registered... */
+	del_timer_sync(&part_sn2->dropped_notify_IRQ_timer);
+	free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid);
+
+	kfree(part_sn2->local_openclose_args_base);
+	part_sn2->local_openclose_args = NULL;
+	kfree(part_sn2->remote_GPs_base);
+	part_sn2->remote_GPs = NULL;
+	kfree(part_sn2->local_GPs_base);
+	part_sn2->local_GPs = NULL;
+	part_sn2->local_chctl_amo_va = NULL;
+}
+
+/*
+ * Create a wrapper that hides the underlying mechanism for pulling a cacheline
+ * (or multiple cachelines) from a remote partition.
+ *
+ * src_pa must be a cacheline aligned physical address on the remote partition.
+ * dst must be a cacheline aligned virtual address on this partition.
+ * cnt must be cacheline sized
+ */
+/* ??? Replace this function by call to xp_remote_memcpy() or bte_copy()? */
+static enum xp_retval
+xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst,
+			       const unsigned long src_pa, size_t cnt)
+{
+	enum xp_retval ret;
+
+	DBUG_ON(src_pa != L1_CACHE_ALIGN(src_pa));
+	DBUG_ON((unsigned long)dst != L1_CACHE_ALIGN((unsigned long)dst));
+	DBUG_ON(cnt != L1_CACHE_ALIGN(cnt));
+
+	if (part->act_state == XPC_P_AS_DEACTIVATING)
+		return part->reason;
+
+	ret = xp_remote_memcpy(xp_pa(dst), src_pa, cnt);
+	if (ret != xpSuccess) {
+		dev_dbg(xpc_chan, "xp_remote_memcpy() from partition %d failed,"
+			" ret=%d\n", XPC_PARTID(part), ret);
+	}
+	return ret;
+}
+
+/*
+ * Pull the remote per partition specific variables from the specified
+ * partition.
+ */
+static enum xp_retval
+xpc_pull_remote_vars_part_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	u8 buffer[L1_CACHE_BYTES * 2];
+	struct xpc_vars_part_sn2 *pulled_entry_cacheline =
+	    (struct xpc_vars_part_sn2 *)L1_CACHE_ALIGN((u64)buffer);
+	struct xpc_vars_part_sn2 *pulled_entry;
+	unsigned long remote_entry_cacheline_pa;
+	unsigned long remote_entry_pa;
+	short partid = XPC_PARTID(part);
+	enum xp_retval ret;
+
+	/* pull the cacheline that contains the variables we're interested in */
+
+	DBUG_ON(part_sn2->remote_vars_part_pa !=
+		L1_CACHE_ALIGN(part_sn2->remote_vars_part_pa));
+	DBUG_ON(sizeof(struct xpc_vars_part_sn2) != L1_CACHE_BYTES / 2);
+
+	remote_entry_pa = part_sn2->remote_vars_part_pa +
+	    sn_partition_id * sizeof(struct xpc_vars_part_sn2);
+
+	remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1));
+
+	pulled_entry = (struct xpc_vars_part_sn2 *)((u64)pulled_entry_cacheline
+						    + (remote_entry_pa &
+						    (L1_CACHE_BYTES - 1)));
+
+	ret = xpc_pull_remote_cachelines_sn2(part, pulled_entry_cacheline,
+					     remote_entry_cacheline_pa,
+					     L1_CACHE_BYTES);
+	if (ret != xpSuccess) {
+		dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
+			"partition %d, ret=%d\n", partid, ret);
+		return ret;
+	}
+
+	/* see if they've been set up yet */
+
+	if (pulled_entry->magic != XPC_VP_MAGIC1_SN2 &&
+	    pulled_entry->magic != XPC_VP_MAGIC2_SN2) {
+
+		if (pulled_entry->magic != 0) {
+			dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
+				"partition %d has bad magic value (=0x%lx)\n",
+				partid, sn_partition_id, pulled_entry->magic);
+			return xpBadMagic;
+		}
+
+		/* they've not been initialized yet */
+		return xpRetry;
+	}
+
+	if (xpc_vars_part_sn2[partid].magic == XPC_VP_MAGIC1_SN2) {
+
+		/* validate the variables */
+
+		if (pulled_entry->GPs_pa == 0 ||
+		    pulled_entry->openclose_args_pa == 0 ||
+		    pulled_entry->chctl_amo_pa == 0) {
+
+			dev_err(xpc_chan, "partition %d's XPC vars_part for "
+				"partition %d are not valid\n", partid,
+				sn_partition_id);
+			return xpInvalidAddress;
+		}
+
+		/* the variables we imported look to be valid */
+
+		part_sn2->remote_GPs_pa = pulled_entry->GPs_pa;
+		part_sn2->remote_openclose_args_pa =
+		    pulled_entry->openclose_args_pa;
+		part_sn2->remote_chctl_amo_va =
+		    (struct amo *)__va(pulled_entry->chctl_amo_pa);
+		part_sn2->notify_IRQ_nasid = pulled_entry->notify_IRQ_nasid;
+		part_sn2->notify_IRQ_phys_cpuid =
+		    pulled_entry->notify_IRQ_phys_cpuid;
+
+		if (part->nchannels > pulled_entry->nchannels)
+			part->nchannels = pulled_entry->nchannels;
+
+		/* let the other side know that we've pulled their variables */
+
+		xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC2_SN2;
+	}
+
+	if (pulled_entry->magic == XPC_VP_MAGIC1_SN2)
+		return xpRetry;
+
+	return xpSuccess;
+}
+
+/*
+ * Establish first contact with the remote partititon. This involves pulling
+ * the XPC per partition variables from the remote partition and waiting for
+ * the remote partition to pull ours.
+ */
+static enum xp_retval
+xpc_make_first_contact_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	enum xp_retval ret;
+
+	/*
+	 * Register the remote partition's amos with SAL so it can handle
+	 * and cleanup errors within that address range should the remote
+	 * partition go down. We don't unregister this range because it is
+	 * difficult to tell when outstanding writes to the remote partition
+	 * are finished and thus when it is safe to unregister. This should
+	 * not result in wasted space in the SAL xp_addr_region table because
+	 * we should get the same page for remote_amos_page_pa after module
+	 * reloads and system reboots.
+	 */
+	if (sn_register_xp_addr_region(part_sn2->remote_amos_page_pa,
+				       PAGE_SIZE, 1) < 0) {
+		dev_warn(xpc_part, "xpc_activating(%d) failed to register "
+			 "xp_addr region\n", XPC_PARTID(part));
+
+		ret = xpPhysAddrRegFailed;
+		XPC_DEACTIVATE_PARTITION(part, ret);
+		return ret;
+	}
+
+	/*
+	 * Send activate IRQ to get other side to activate if they've not
+	 * already begun to do so.
+	 */
+	xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+				  cnodeid_to_nasid(0),
+				  part_sn2->activate_IRQ_nasid,
+				  part_sn2->activate_IRQ_phys_cpuid);
+
+	while ((ret = xpc_pull_remote_vars_part_sn2(part)) != xpSuccess) {
+		if (ret != xpRetry) {
+			XPC_DEACTIVATE_PARTITION(part, ret);
+			return ret;
+		}
+
+		dev_dbg(xpc_part, "waiting to make first contact with "
+			"partition %d\n", XPC_PARTID(part));
+
+		/* wait a 1/4 of a second or so */
+		(void)msleep_interruptible(250);
+
+		if (part->act_state == XPC_P_AS_DEACTIVATING)
+			return part->reason;
+	}
+
+	return xpSuccess;
+}
+
+/*
+ * Get the chctl flags and pull the openclose args and/or remote GPs as needed.
+ */
+static u64
+xpc_get_chctl_all_flags_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	unsigned long irq_flags;
+	union xpc_channel_ctl_flags chctl;
+	enum xp_retval ret;
+
+	/*
+	 * See if there are any chctl flags to be handled.
+	 */
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	chctl = part->chctl;
+	if (chctl.all_flags != 0)
+		part->chctl.all_flags = 0;
+
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+	if (xpc_any_openclose_chctl_flags_set(&chctl)) {
+		ret = xpc_pull_remote_cachelines_sn2(part, part->
+						     remote_openclose_args,
+						     part_sn2->
+						     remote_openclose_args_pa,
+						     XPC_OPENCLOSE_ARGS_SIZE);
+		if (ret != xpSuccess) {
+			XPC_DEACTIVATE_PARTITION(part, ret);
+
+			dev_dbg(xpc_chan, "failed to pull openclose args from "
+				"partition %d, ret=%d\n", XPC_PARTID(part),
+				ret);
+
+			/* don't bother processing chctl flags anymore */
+			chctl.all_flags = 0;
+		}
+	}
+
+	if (xpc_any_msg_chctl_flags_set(&chctl)) {
+		ret = xpc_pull_remote_cachelines_sn2(part, part_sn2->remote_GPs,
+						     part_sn2->remote_GPs_pa,
+						     XPC_GP_SIZE);
+		if (ret != xpSuccess) {
+			XPC_DEACTIVATE_PARTITION(part, ret);
+
+			dev_dbg(xpc_chan, "failed to pull GPs from partition "
+				"%d, ret=%d\n", XPC_PARTID(part), ret);
+
+			/* don't bother processing chctl flags anymore */
+			chctl.all_flags = 0;
+		}
+	}
+
+	return chctl.all_flags;
+}
+
+/*
+ * Allocate the local message queue and the notify queue.
+ */
+static enum xp_retval
+xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	unsigned long irq_flags;
+	int nentries;
+	size_t nbytes;
+
+	for (nentries = ch->local_nentries; nentries > 0; nentries--) {
+
+		nbytes = nentries * ch->entry_size;
+		ch_sn2->local_msgqueue =
+		    xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL,
+						  &ch_sn2->local_msgqueue_base);
+		if (ch_sn2->local_msgqueue == NULL)
+			continue;
+
+		nbytes = nentries * sizeof(struct xpc_notify_sn2);
+		ch_sn2->notify_queue = kzalloc(nbytes, GFP_KERNEL);
+		if (ch_sn2->notify_queue == NULL) {
+			kfree(ch_sn2->local_msgqueue_base);
+			ch_sn2->local_msgqueue = NULL;
+			continue;
+		}
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->local_nentries) {
+			dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, "
+				"partid=%d, channel=%d\n", nentries,
+				ch->local_nentries, ch->partid, ch->number);
+
+			ch->local_nentries = nentries;
+		}
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
+		"queue, partid=%d, channel=%d\n", ch->partid, ch->number);
+	return xpNoMemory;
+}
+
+/*
+ * Allocate the cached remote message queue.
+ */
+static enum xp_retval
+xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	unsigned long irq_flags;
+	int nentries;
+	size_t nbytes;
+
+	DBUG_ON(ch->remote_nentries <= 0);
+
+	for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
+
+		nbytes = nentries * ch->entry_size;
+		ch_sn2->remote_msgqueue =
+		    xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch_sn2->
+						  remote_msgqueue_base);
+		if (ch_sn2->remote_msgqueue == NULL)
+			continue;
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->remote_nentries) {
+			dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, "
+				"partid=%d, channel=%d\n", nentries,
+				ch->remote_nentries, ch->partid, ch->number);
+
+			ch->remote_nentries = nentries;
+		}
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
+		"partid=%d, channel=%d\n", ch->partid, ch->number);
+	return xpNoMemory;
+}
+
+/*
+ * Allocate message queues and other stuff associated with a channel.
+ *
+ * Note: Assumes all of the channel sizes are filled in.
+ */
+static enum xp_retval
+xpc_setup_msg_structures_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	enum xp_retval ret;
+
+	DBUG_ON(ch->flags & XPC_C_SETUP);
+
+	ret = xpc_allocate_local_msgqueue_sn2(ch);
+	if (ret == xpSuccess) {
+
+		ret = xpc_allocate_remote_msgqueue_sn2(ch);
+		if (ret != xpSuccess) {
+			kfree(ch_sn2->local_msgqueue_base);
+			ch_sn2->local_msgqueue = NULL;
+			kfree(ch_sn2->notify_queue);
+			ch_sn2->notify_queue = NULL;
+		}
+	}
+	return ret;
+}
+
+/*
+ * Free up message queues and other stuff that were allocated for the specified
+ * channel.
+ */
+static void
+xpc_teardown_msg_structures_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+
+	DBUG_ON(!spin_is_locked(&ch->lock));
+
+	ch_sn2->remote_msgqueue_pa = 0;
+
+	ch_sn2->local_GP->get = 0;
+	ch_sn2->local_GP->put = 0;
+	ch_sn2->remote_GP.get = 0;
+	ch_sn2->remote_GP.put = 0;
+	ch_sn2->w_local_GP.get = 0;
+	ch_sn2->w_local_GP.put = 0;
+	ch_sn2->w_remote_GP.get = 0;
+	ch_sn2->w_remote_GP.put = 0;
+	ch_sn2->next_msg_to_pull = 0;
+
+	if (ch->flags & XPC_C_SETUP) {
+		dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n",
+			ch->flags, ch->partid, ch->number);
+
+		kfree(ch_sn2->local_msgqueue_base);
+		ch_sn2->local_msgqueue = NULL;
+		kfree(ch_sn2->remote_msgqueue_base);
+		ch_sn2->remote_msgqueue = NULL;
+		kfree(ch_sn2->notify_queue);
+		ch_sn2->notify_queue = NULL;
+	}
+}
+
+/*
+ * Notify those who wanted to be notified upon delivery of their message.
+ */
+static void
+xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put)
+{
+	struct xpc_notify_sn2 *notify;
+	u8 notify_type;
+	s64 get = ch->sn.sn2.w_remote_GP.get - 1;
+
+	while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
+
+		notify = &ch->sn.sn2.notify_queue[get % ch->local_nentries];
+
+		/*
+		 * See if the notify entry indicates it was associated with
+		 * a message who's sender wants to be notified. It is possible
+		 * that it is, but someone else is doing or has done the
+		 * notification.
+		 */
+		notify_type = notify->type;
+		if (notify_type == 0 ||
+		    cmpxchg(&notify->type, notify_type, 0) != notify_type) {
+			continue;
+		}
+
+		DBUG_ON(notify_type != XPC_N_CALL);
+
+		atomic_dec(&ch->n_to_notify);
+
+		if (notify->func != NULL) {
+			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p "
+				"msg_number=%ld partid=%d channel=%d\n",
+				(void *)notify, get, ch->partid, ch->number);
+
+			notify->func(reason, ch->partid, ch->number,
+				     notify->key);
+
+			dev_dbg(xpc_chan, "notify->func() returned, notify=0x%p"
+				" msg_number=%ld partid=%d channel=%d\n",
+				(void *)notify, get, ch->partid, ch->number);
+		}
+	}
+}
+
+static void
+xpc_notify_senders_of_disconnect_sn2(struct xpc_channel *ch)
+{
+	xpc_notify_senders_sn2(ch, ch->reason, ch->sn.sn2.w_local_GP.put);
+}
+
+/*
+ * Clear some of the msg flags in the local message queue.
+ */
+static inline void
+xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 get;
+
+	get = ch_sn2->w_remote_GP.get;
+	do {
+		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+					     (get % ch->local_nentries) *
+					     ch->entry_size);
+		msg->flags = 0;
+	} while (++get < ch_sn2->remote_GP.get);
+}
+
+/*
+ * Clear some of the msg flags in the remote message queue.
+ */
+static inline void
+xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 put;
+
+	put = ch_sn2->w_remote_GP.put;
+	do {
+		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+					     (put % ch->remote_nentries) *
+					     ch->entry_size);
+		msg->flags = 0;
+	} while (++put < ch_sn2->remote_GP.put);
+}
+
+static int
+xpc_n_of_deliverable_payloads_sn2(struct xpc_channel *ch)
+{
+	return ch->sn.sn2.w_remote_GP.put - ch->sn.sn2.w_local_GP.get;
+}
+
+static void
+xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number)
+{
+	struct xpc_channel *ch = &part->channels[ch_number];
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	int npayloads_sent;
+
+	ch_sn2->remote_GP = part->sn.sn2.remote_GPs[ch_number];
+
+	/* See what, if anything, has changed for each connected channel */
+
+	xpc_msgqueue_ref(ch);
+
+	if (ch_sn2->w_remote_GP.get == ch_sn2->remote_GP.get &&
+	    ch_sn2->w_remote_GP.put == ch_sn2->remote_GP.put) {
+		/* nothing changed since GPs were last pulled */
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	/*
+	 * First check to see if messages recently sent by us have been
+	 * received by the other side. (The remote GET value will have
+	 * changed since we last looked at it.)
+	 */
+
+	if (ch_sn2->w_remote_GP.get != ch_sn2->remote_GP.get) {
+
+		/*
+		 * We need to notify any senders that want to be notified
+		 * that their sent messages have been received by their
+		 * intended recipients. We need to do this before updating
+		 * w_remote_GP.get so that we don't allocate the same message
+		 * queue entries prematurely (see xpc_allocate_msg()).
+		 */
+		if (atomic_read(&ch->n_to_notify) > 0) {
+			/*
+			 * Notify senders that messages sent have been
+			 * received and delivered by the other side.
+			 */
+			xpc_notify_senders_sn2(ch, xpMsgDelivered,
+					       ch_sn2->remote_GP.get);
+		}
+
+		/*
+		 * Clear msg->flags in previously sent messages, so that
+		 * they're ready for xpc_allocate_msg().
+		 */
+		xpc_clear_local_msgqueue_flags_sn2(ch);
+
+		ch_sn2->w_remote_GP.get = ch_sn2->remote_GP.get;
+
+		dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
+			"channel=%d\n", ch_sn2->w_remote_GP.get, ch->partid,
+			ch->number);
+
+		/*
+		 * If anyone was waiting for message queue entries to become
+		 * available, wake them up.
+		 */
+		if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
+			wake_up(&ch->msg_allocate_wq);
+	}
+
+	/*
+	 * Now check for newly sent messages by the other side. (The remote
+	 * PUT value will have changed since we last looked at it.)
+	 */
+
+	if (ch_sn2->w_remote_GP.put != ch_sn2->remote_GP.put) {
+		/*
+		 * Clear msg->flags in previously received messages, so that
+		 * they're ready for xpc_get_deliverable_payload_sn2().
+		 */
+		xpc_clear_remote_msgqueue_flags_sn2(ch);
+
+		ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
+
+		dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
+			"channel=%d\n", ch_sn2->w_remote_GP.put, ch->partid,
+			ch->number);
+
+		npayloads_sent = xpc_n_of_deliverable_payloads_sn2(ch);
+		if (npayloads_sent > 0) {
+			dev_dbg(xpc_chan, "msgs waiting to be copied and "
+				"delivered=%d, partid=%d, channel=%d\n",
+				npayloads_sent, ch->partid, ch->number);
+
+			if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)
+				xpc_activate_kthreads(ch, npayloads_sent);
+		}
+	}
+
+	xpc_msgqueue_deref(ch);
+}
+
+static struct xpc_msg_sn2 *
+xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	unsigned long remote_msg_pa;
+	struct xpc_msg_sn2 *msg;
+	u32 msg_index;
+	u32 nmsgs;
+	u64 msg_offset;
+	enum xp_retval ret;
+
+	if (mutex_lock_interruptible(&ch_sn2->msg_to_pull_mutex) != 0) {
+		/* we were interrupted by a signal */
+		return NULL;
+	}
+
+	while (get >= ch_sn2->next_msg_to_pull) {
+
+		/* pull as many messages as are ready and able to be pulled */
+
+		msg_index = ch_sn2->next_msg_to_pull % ch->remote_nentries;
+
+		DBUG_ON(ch_sn2->next_msg_to_pull >= ch_sn2->w_remote_GP.put);
+		nmsgs = ch_sn2->w_remote_GP.put - ch_sn2->next_msg_to_pull;
+		if (msg_index + nmsgs > ch->remote_nentries) {
+			/* ignore the ones that wrap the msg queue for now */
+			nmsgs = ch->remote_nentries - msg_index;
+		}
+
+		msg_offset = msg_index * ch->entry_size;
+		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+		    msg_offset);
+		remote_msg_pa = ch_sn2->remote_msgqueue_pa + msg_offset;
+
+		ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg_pa,
+						     nmsgs * ch->entry_size);
+		if (ret != xpSuccess) {
+
+			dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
+				" msg %ld from partition %d, channel=%d, "
+				"ret=%d\n", nmsgs, ch_sn2->next_msg_to_pull,
+				ch->partid, ch->number, ret);
+
+			XPC_DEACTIVATE_PARTITION(part, ret);
+
+			mutex_unlock(&ch_sn2->msg_to_pull_mutex);
+			return NULL;
+		}
+
+		ch_sn2->next_msg_to_pull += nmsgs;
+	}
+
+	mutex_unlock(&ch_sn2->msg_to_pull_mutex);
+
+	/* return the message we were looking for */
+	msg_offset = (get % ch->remote_nentries) * ch->entry_size;
+	msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + msg_offset);
+
+	return msg;
+}
+
+/*
+ * Get the next deliverable message's payload.
+ */
+static void *
+xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	void *payload = NULL;
+	s64 get;
+
+	do {
+		if (ch->flags & XPC_C_DISCONNECTING)
+			break;
+
+		get = ch_sn2->w_local_GP.get;
+		rmb();	/* guarantee that .get loads before .put */
+		if (get == ch_sn2->w_remote_GP.put)
+			break;
+
+		/* There are messages waiting to be pulled and delivered.
+		 * We need to try to secure one for ourselves. We'll do this
+		 * by trying to increment w_local_GP.get and hope that no one
+		 * else beats us to it. If they do, we'll we'll simply have
+		 * to try again for the next one.
+		 */
+
+		if (cmpxchg(&ch_sn2->w_local_GP.get, get, get + 1) == get) {
+			/* we got the entry referenced by get */
+
+			dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
+				"partid=%d, channel=%d\n", get + 1,
+				ch->partid, ch->number);
+
+			/* pull the message from the remote partition */
+
+			msg = xpc_pull_remote_msg_sn2(ch, get);
+
+			DBUG_ON(msg != NULL && msg->number != get);
+			DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE));
+			DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY));
+
+			payload = &msg->payload;
+			break;
+		}
+
+	} while (1);
+
+	return payload;
+}
+
+/*
+ * Now we actually send the messages that are ready to be sent by advancing
+ * the local message queue's Put value and then send a chctl msgrequest to the
+ * recipient partition.
+ */
+static void
+xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 put = initial_put + 1;
+	int send_msgrequest = 0;
+
+	while (1) {
+
+		while (1) {
+			if (put == ch_sn2->w_local_GP.put)
+				break;
+
+			msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->
+						     local_msgqueue + (put %
+						     ch->local_nentries) *
+						     ch->entry_size);
+
+			if (!(msg->flags & XPC_M_SN2_READY))
+				break;
+
+			put++;
+		}
+
+		if (put == initial_put) {
+			/* nothing's changed */
+			break;
+		}
+
+		if (cmpxchg_rel(&ch_sn2->local_GP->put, initial_put, put) !=
+		    initial_put) {
+			/* someone else beat us to it */
+			DBUG_ON(ch_sn2->local_GP->put < initial_put);
+			break;
+		}
+
+		/* we just set the new value of local_GP->put */
+
+		dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
+			"channel=%d\n", put, ch->partid, ch->number);
+
+		send_msgrequest = 1;
+
+		/*
+		 * We need to ensure that the message referenced by
+		 * local_GP->put is not XPC_M_SN2_READY or that local_GP->put
+		 * equals w_local_GP.put, so we'll go have a look.
+		 */
+		initial_put = put;
+	}
+
+	if (send_msgrequest)
+		xpc_send_chctl_msgrequest_sn2(ch);
+}
+
+/*
+ * Allocate an entry for a message from the message queue associated with the
+ * specified channel.
+ */
+static enum xp_retval
+xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags,
+		     struct xpc_msg_sn2 **address_of_msg)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	enum xp_retval ret;
+	s64 put;
+
+	/*
+	 * Get the next available message entry from the local message queue.
+	 * If none are available, we'll make sure that we grab the latest
+	 * GP values.
+	 */
+	ret = xpTimeout;
+
+	while (1) {
+
+		put = ch_sn2->w_local_GP.put;
+		rmb();	/* guarantee that .put loads before .get */
+		if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {
+
+			/* There are available message entries. We need to try
+			 * to secure one for ourselves. We'll do this by trying
+			 * to increment w_local_GP.put as long as someone else
+			 * doesn't beat us to it. If they do, we'll have to
+			 * try again.
+			 */
+			if (cmpxchg(&ch_sn2->w_local_GP.put, put, put + 1) ==
+			    put) {
+				/* we got the entry referenced by put */
+				break;
+			}
+			continue;	/* try again */
+		}
+
+		/*
+		 * There aren't any available msg entries at this time.
+		 *
+		 * In waiting for a message entry to become available,
+		 * we set a timeout in case the other side is not sending
+		 * completion interrupts. This lets us fake a notify IRQ
+		 * that will cause the notify IRQ handler to fetch the latest
+		 * GP values as if an interrupt was sent by the other side.
+		 */
+		if (ret == xpTimeout)
+			xpc_send_chctl_local_msgrequest_sn2(ch);
+
+		if (flags & XPC_NOWAIT)
+			return xpNoWait;
+
+		ret = xpc_allocate_msg_wait(ch);
+		if (ret != xpInterrupted && ret != xpTimeout)
+			return ret;
+	}
+
+	/* get the message's address and initialize it */
+	msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+				     (put % ch->local_nentries) *
+				     ch->entry_size);
+
+	DBUG_ON(msg->flags != 0);
+	msg->number = put;
+
+	dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
+		"msg_number=%ld, partid=%d, channel=%d\n", put + 1,
+		(void *)msg, msg->number, ch->partid, ch->number);
+
+	*address_of_msg = msg;
+	return xpSuccess;
+}
+
+/*
+ * Common code that does the actual sending of the message by advancing the
+ * local message queue's Put value and sends a chctl msgrequest to the
+ * partition the message is being sent to.
+ */
+static enum xp_retval
+xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload,
+		     u16 payload_size, u8 notify_type, xpc_notify_func func,
+		     void *key)
+{
+	enum xp_retval ret = xpSuccess;
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg = msg;
+	struct xpc_notify_sn2 *notify = notify;
+	s64 msg_number;
+	s64 put;
+
+	DBUG_ON(notify_type == XPC_N_CALL && func == NULL);
+
+	if (XPC_MSG_SIZE(payload_size) > ch->entry_size)
+		return xpPayloadTooBig;
+
+	xpc_msgqueue_ref(ch);
+
+	if (ch->flags & XPC_C_DISCONNECTING) {
+		ret = ch->reason;
+		goto out_1;
+	}
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		ret = xpNotConnected;
+		goto out_1;
+	}
+
+	ret = xpc_allocate_msg_sn2(ch, flags, &msg);
+	if (ret != xpSuccess)
+		goto out_1;
+
+	msg_number = msg->number;
+
+	if (notify_type != 0) {
+		/*
+		 * Tell the remote side to send an ACK interrupt when the
+		 * message has been delivered.
+		 */
+		msg->flags |= XPC_M_SN2_INTERRUPT;
+
+		atomic_inc(&ch->n_to_notify);
+
+		notify = &ch_sn2->notify_queue[msg_number % ch->local_nentries];
+		notify->func = func;
+		notify->key = key;
+		notify->type = notify_type;
+
+		/* ??? Is a mb() needed here? */
+
+		if (ch->flags & XPC_C_DISCONNECTING) {
+			/*
+			 * An error occurred between our last error check and
+			 * this one. We will try to clear the type field from
+			 * the notify entry. If we succeed then
+			 * xpc_disconnect_channel() didn't already process
+			 * the notify entry.
+			 */
+			if (cmpxchg(&notify->type, notify_type, 0) ==
+			    notify_type) {
+				atomic_dec(&ch->n_to_notify);
+				ret = ch->reason;
+			}
+			goto out_1;
+		}
+	}
+
+	memcpy(&msg->payload, payload, payload_size);
+
+	msg->flags |= XPC_M_SN2_READY;
+
+	/*
+	 * The preceding store of msg->flags must occur before the following
+	 * load of local_GP->put.
+	 */
+	mb();
+
+	/* see if the message is next in line to be sent, if so send it */
+
+	put = ch_sn2->local_GP->put;
+	if (put == msg_number)
+		xpc_send_msgs_sn2(ch, put);
+
+out_1:
+	xpc_msgqueue_deref(ch);
+	return ret;
+}
+
+/*
+ * Now we actually acknowledge the messages that have been delivered and ack'd
+ * by advancing the cached remote message queue's Get value and if requested
+ * send a chctl msgrequest to the message sender's partition.
+ *
+ * If a message has XPC_M_SN2_INTERRUPT set, send an interrupt to the partition
+ * that sent the message.
+ */
+static void
+xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 get = initial_get + 1;
+	int send_msgrequest = 0;
+
+	while (1) {
+
+		while (1) {
+			if (get == ch_sn2->w_local_GP.get)
+				break;
+
+			msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->
+						     remote_msgqueue + (get %
+						     ch->remote_nentries) *
+						     ch->entry_size);
+
+			if (!(msg->flags & XPC_M_SN2_DONE))
+				break;
+
+			msg_flags |= msg->flags;
+			get++;
+		}
+
+		if (get == initial_get) {
+			/* nothing's changed */
+			break;
+		}
+
+		if (cmpxchg_rel(&ch_sn2->local_GP->get, initial_get, get) !=
+		    initial_get) {
+			/* someone else beat us to it */
+			DBUG_ON(ch_sn2->local_GP->get <= initial_get);
+			break;
+		}
+
+		/* we just set the new value of local_GP->get */
+
+		dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
+			"channel=%d\n", get, ch->partid, ch->number);
+
+		send_msgrequest = (msg_flags & XPC_M_SN2_INTERRUPT);
+
+		/*
+		 * We need to ensure that the message referenced by
+		 * local_GP->get is not XPC_M_SN2_DONE or that local_GP->get
+		 * equals w_local_GP.get, so we'll go have a look.
+		 */
+		initial_get = get;
+	}
+
+	if (send_msgrequest)
+		xpc_send_chctl_msgrequest_sn2(ch);
+}
+
+static void
+xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
+{
+	struct xpc_msg_sn2 *msg;
+	s64 msg_number;
+	s64 get;
+
+	msg = container_of(payload, struct xpc_msg_sn2, payload);
+	msg_number = msg->number;
+
+	dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
+		(void *)msg, msg_number, ch->partid, ch->number);
+
+	DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) !=
+		msg_number % ch->remote_nentries);
+	DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+
+	msg->flags |= XPC_M_SN2_DONE;
+
+	/*
+	 * The preceding store of msg->flags must occur before the following
+	 * load of local_GP->get.
+	 */
+	mb();
+
+	/*
+	 * See if this message is next in line to be acknowledged as having
+	 * been delivered.
+	 */
+	get = ch->sn.sn2.local_GP->get;
+	if (get == msg_number)
+		xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
+}
+
+int
+xpc_init_sn2(void)
+{
+	int ret;
+	size_t buf_size;
+
+	xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2;
+	xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
+	xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
+	xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
+	xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
+	xpc_online_heartbeat = xpc_online_heartbeat_sn2;
+	xpc_heartbeat_init = xpc_heartbeat_init_sn2;
+	xpc_heartbeat_exit = xpc_heartbeat_exit_sn2;
+	xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2;
+
+	xpc_request_partition_activation = xpc_request_partition_activation_sn2;
+	xpc_request_partition_reactivation =
+	    xpc_request_partition_reactivation_sn2;
+	xpc_request_partition_deactivation =
+	    xpc_request_partition_deactivation_sn2;
+	xpc_cancel_partition_deactivation_request =
+	    xpc_cancel_partition_deactivation_request_sn2;
+
+	xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
+	xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2;
+	xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2;
+	xpc_make_first_contact = xpc_make_first_contact_sn2;
+
+	xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2;
+	xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2;
+	xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
+	xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
+	xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
+
+	xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
+
+	xpc_setup_msg_structures = xpc_setup_msg_structures_sn2;
+	xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2;
+
+	xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2;
+	xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2;
+	xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2;
+	xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2;
+
+	xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2;
+	xpc_indicate_partition_disengaged =
+	    xpc_indicate_partition_disengaged_sn2;
+	xpc_partition_engaged = xpc_partition_engaged_sn2;
+	xpc_any_partition_engaged = xpc_any_partition_engaged_sn2;
+	xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2;
+
+	xpc_send_payload = xpc_send_payload_sn2;
+	xpc_received_payload = xpc_received_payload_sn2;
+
+	if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) {
+		dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is "
+			"larger than %d\n", XPC_MSG_HDR_MAX_SIZE);
+		return -E2BIG;
+	}
+
+	buf_size = max(XPC_RP_VARS_SIZE,
+		       XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES_SN2);
+	xpc_remote_copy_buffer_sn2 = xpc_kmalloc_cacheline_aligned(buf_size,
+								   GFP_KERNEL,
+					      &xpc_remote_copy_buffer_base_sn2);
+	if (xpc_remote_copy_buffer_sn2 == NULL) {
+		dev_err(xpc_part, "can't get memory for remote copy buffer\n");
+		return -ENOMEM;
+	}
+
+	/* open up protections for IPI and [potentially] amo operations */
+	xpc_allow_IPI_ops_sn2();
+	xpc_allow_amo_ops_shub_wars_1_1_sn2();
+
+	/*
+	 * This is safe to do before the xpc_hb_checker thread has started
+	 * because the handler releases a wait queue.  If an interrupt is
+	 * received before the thread is waiting, it will not go to sleep,
+	 * but rather immediately process the interrupt.
+	 */
+	ret = request_irq(SGI_XPC_ACTIVATE, xpc_handle_activate_IRQ_sn2, 0,
+			  "xpc hb", NULL);
+	if (ret != 0) {
+		dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
+			"errno=%d\n", -ret);
+		xpc_disallow_IPI_ops_sn2();
+		kfree(xpc_remote_copy_buffer_base_sn2);
+	}
+	return ret;
+}
+
+void
+xpc_exit_sn2(void)
+{
+	free_irq(SGI_XPC_ACTIVATE, NULL);
+	xpc_disallow_IPI_ops_sn2();
+	kfree(xpc_remote_copy_buffer_base_sn2);
+}
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
new file mode 100644
index 00000000000..1ac694c0162
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -0,0 +1,1443 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition Communication (XPC) uv-based functions.
+ *
+ *     Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <asm/uv/uv_hub.h>
+#include "../sgi-gru/gru.h"
+#include "../sgi-gru/grukservices.h"
+#include "xpc.h"
+
+static atomic64_t xpc_heartbeat_uv;
+static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+
+#define XPC_ACTIVATE_MSG_SIZE_UV	(1 * GRU_CACHE_LINE_BYTES)
+#define XPC_NOTIFY_MSG_SIZE_UV		(2 * GRU_CACHE_LINE_BYTES)
+
+#define XPC_ACTIVATE_MQ_SIZE_UV	(4 * XP_MAX_NPARTITIONS_UV * \
+				 XPC_ACTIVATE_MSG_SIZE_UV)
+#define XPC_NOTIFY_MQ_SIZE_UV	(4 * XP_MAX_NPARTITIONS_UV * \
+				 XPC_NOTIFY_MSG_SIZE_UV)
+
+static void *xpc_activate_mq_uv;
+static void *xpc_notify_mq_uv;
+
+static int
+xpc_setup_partitions_sn_uv(void)
+{
+	short partid;
+	struct xpc_partition_uv *part_uv;
+
+	for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+		part_uv = &xpc_partitions[partid].sn.uv;
+
+		spin_lock_init(&part_uv->flags_lock);
+		part_uv->remote_act_state = XPC_P_AS_INACTIVE;
+	}
+	return 0;
+}
+
+static void *
+xpc_create_gru_mq_uv(unsigned int mq_size, int cpuid, unsigned int irq,
+		     irq_handler_t irq_handler)
+{
+	int ret;
+	int nid;
+	int mq_order;
+	struct page *page;
+	void *mq;
+
+	nid = cpu_to_node(cpuid);
+	mq_order = get_order(mq_size);
+	page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+				mq_order);
+	if (page == NULL) {
+		dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d "
+			"bytes of memory on nid=%d for GRU mq\n", mq_size, nid);
+		return NULL;
+	}
+
+	mq = page_address(page);
+	ret = gru_create_message_queue(mq, mq_size);
+	if (ret != 0) {
+		dev_err(xpc_part, "gru_create_message_queue() returned "
+			"error=%d\n", ret);
+		free_pages((unsigned long)mq, mq_order);
+		return NULL;
+	}
+
+	/* !!! Need to do some other things to set up IRQ */
+
+	ret = request_irq(irq, irq_handler, 0, "xpc", NULL);
+	if (ret != 0) {
+		dev_err(xpc_part, "request_irq(irq=%d) returned error=%d\n",
+			irq, ret);
+		free_pages((unsigned long)mq, mq_order);
+		return NULL;
+	}
+
+	/* !!! enable generation of irq when GRU mq op occurs to this mq */
+
+	/* ??? allow other partitions to access GRU mq? */
+
+	return mq;
+}
+
+static void
+xpc_destroy_gru_mq_uv(void *mq, unsigned int mq_size, unsigned int irq)
+{
+	/* ??? disallow other partitions to access GRU mq? */
+
+	/* !!! disable generation of irq when GRU mq op occurs to this mq */
+
+	free_irq(irq, NULL);
+
+	free_pages((unsigned long)mq, get_order(mq_size));
+}
+
+static enum xp_retval
+xpc_send_gru_msg(unsigned long mq_gpa, void *msg, size_t msg_size)
+{
+	enum xp_retval xp_ret;
+	int ret;
+
+	while (1) {
+		ret = gru_send_message_gpa(mq_gpa, msg, msg_size);
+		if (ret == MQE_OK) {
+			xp_ret = xpSuccess;
+			break;
+		}
+
+		if (ret == MQE_QUEUE_FULL) {
+			dev_dbg(xpc_chan, "gru_send_message_gpa() returned "
+				"error=MQE_QUEUE_FULL\n");
+			/* !!! handle QLimit reached; delay & try again */
+			/* ??? Do we add a limit to the number of retries? */
+			(void)msleep_interruptible(10);
+		} else if (ret == MQE_CONGESTION) {
+			dev_dbg(xpc_chan, "gru_send_message_gpa() returned "
+				"error=MQE_CONGESTION\n");
+			/* !!! handle LB Overflow; simply try again */
+			/* ??? Do we add a limit to the number of retries? */
+		} else {
+			/* !!! Currently this is MQE_UNEXPECTED_CB_ERR */
+			dev_err(xpc_chan, "gru_send_message_gpa() returned "
+				"error=%d\n", ret);
+			xp_ret = xpGruSendMqError;
+			break;
+		}
+	}
+	return xp_ret;
+}
+
+static void
+xpc_process_activate_IRQ_rcvd_uv(void)
+{
+	unsigned long irq_flags;
+	short partid;
+	struct xpc_partition *part;
+	u8 act_state_req;
+
+	DBUG_ON(xpc_activate_IRQ_rcvd == 0);
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+		part = &xpc_partitions[partid];
+
+		if (part->sn.uv.act_state_req == 0)
+			continue;
+
+		xpc_activate_IRQ_rcvd--;
+		BUG_ON(xpc_activate_IRQ_rcvd < 0);
+
+		act_state_req = part->sn.uv.act_state_req;
+		part->sn.uv.act_state_req = 0;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		if (act_state_req == XPC_P_ASR_ACTIVATE_UV) {
+			if (part->act_state == XPC_P_AS_INACTIVE)
+				xpc_activate_partition(part);
+			else if (part->act_state == XPC_P_AS_DEACTIVATING)
+				XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+
+		} else if (act_state_req == XPC_P_ASR_REACTIVATE_UV) {
+			if (part->act_state == XPC_P_AS_INACTIVE)
+				xpc_activate_partition(part);
+			else
+				XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+
+		} else if (act_state_req == XPC_P_ASR_DEACTIVATE_UV) {
+			XPC_DEACTIVATE_PARTITION(part, part->sn.uv.reason);
+
+		} else {
+			BUG();
+		}
+
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (xpc_activate_IRQ_rcvd == 0)
+			break;
+	}
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+}
+
+static void
+xpc_handle_activate_mq_msg_uv(struct xpc_partition *part,
+			      struct xpc_activate_mq_msghdr_uv *msg_hdr,
+			      int *wakeup_hb_checker)
+{
+	unsigned long irq_flags;
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+	struct xpc_openclose_args *args;
+
+	part_uv->remote_act_state = msg_hdr->act_state;
+
+	switch (msg_hdr->type) {
+	case XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV:
+		/* syncing of remote_act_state was just done above */
+		break;
+
+	case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: {
+		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+		msg = container_of(msg_hdr,
+				   struct xpc_activate_mq_msg_heartbeat_req_uv,
+				   hdr);
+		part_uv->heartbeat = msg->heartbeat;
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: {
+		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+		msg = container_of(msg_hdr,
+				   struct xpc_activate_mq_msg_heartbeat_req_uv,
+				   hdr);
+		part_uv->heartbeat = msg->heartbeat;
+
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: {
+		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+		msg = container_of(msg_hdr,
+				   struct xpc_activate_mq_msg_heartbeat_req_uv,
+				   hdr);
+		part_uv->heartbeat = msg->heartbeat;
+
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: {
+		struct xpc_activate_mq_msg_activate_req_uv *msg;
+
+		/*
+		 * ??? Do we deal here with ts_jiffies being different
+		 * ??? if act_state != XPC_P_AS_INACTIVE instead of
+		 * ??? below?
+		 */
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_activate_req_uv, hdr);
+
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV;
+		part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */
+		part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies;
+		part_uv->remote_activate_mq_gpa = msg->activate_mq_gpa;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV: {
+		struct xpc_activate_mq_msg_deactivate_req_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_deactivate_req_uv, hdr);
+
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+		part_uv->reason = msg->reason;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+		return;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV: {
+		struct xpc_activate_mq_msg_chctl_closerequest_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_closerequest_uv,
+				   hdr);
+		args = &part->remote_openclose_args[msg->ch_number];
+		args->reason = msg->reason;
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREQUEST;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV: {
+		struct xpc_activate_mq_msg_chctl_closereply_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_closereply_uv,
+				   hdr);
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREPLY;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV: {
+		struct xpc_activate_mq_msg_chctl_openrequest_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_openrequest_uv,
+				   hdr);
+		args = &part->remote_openclose_args[msg->ch_number];
+		args->entry_size = msg->entry_size;
+		args->local_nentries = msg->local_nentries;
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREQUEST;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV: {
+		struct xpc_activate_mq_msg_chctl_openreply_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_openreply_uv, hdr);
+		args = &part->remote_openclose_args[msg->ch_number];
+		args->remote_nentries = msg->remote_nentries;
+		args->local_nentries = msg->local_nentries;
+		args->local_msgqueue_pa = msg->local_notify_mq_gpa;
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREPLY;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV:
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags |= XPC_P_ENGAGED_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+
+	case XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV:
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags &= ~XPC_P_ENGAGED_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+
+	default:
+		dev_err(xpc_part, "received unknown activate_mq msg type=%d "
+			"from partition=%d\n", msg_hdr->type, XPC_PARTID(part));
+
+		/* get hb checker to deactivate from the remote partition */
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+		part_uv->reason = xpBadMsgType;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+		return;
+	}
+
+	if (msg_hdr->rp_ts_jiffies != part->remote_rp_ts_jiffies &&
+	    part->remote_rp_ts_jiffies != 0) {
+		/*
+		 * ??? Does what we do here need to be sensitive to
+		 * ??? act_state or remote_act_state?
+		 */
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_REACTIVATE_UV;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+	}
+}
+
+static irqreturn_t
+xpc_handle_activate_IRQ_uv(int irq, void *dev_id)
+{
+	struct xpc_activate_mq_msghdr_uv *msg_hdr;
+	short partid;
+	struct xpc_partition *part;
+	int wakeup_hb_checker = 0;
+
+	while ((msg_hdr = gru_get_next_message(xpc_activate_mq_uv)) != NULL) {
+
+		partid = msg_hdr->partid;
+		if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) {
+			dev_err(xpc_part, "xpc_handle_activate_IRQ_uv() "
+				"received invalid partid=0x%x in message\n",
+				partid);
+		} else {
+			part = &xpc_partitions[partid];
+			if (xpc_part_ref(part)) {
+				xpc_handle_activate_mq_msg_uv(part, msg_hdr,
+							    &wakeup_hb_checker);
+				xpc_part_deref(part);
+			}
+		}
+
+		gru_free_message(xpc_activate_mq_uv, msg_hdr);
+	}
+
+	if (wakeup_hb_checker)
+		wake_up_interruptible(&xpc_activate_IRQ_wq);
+
+	return IRQ_HANDLED;
+}
+
+static enum xp_retval
+xpc_send_activate_IRQ_uv(struct xpc_partition *part, void *msg, size_t msg_size,
+			 int msg_type)
+{
+	struct xpc_activate_mq_msghdr_uv *msg_hdr = msg;
+
+	DBUG_ON(msg_size > XPC_ACTIVATE_MSG_SIZE_UV);
+
+	msg_hdr->type = msg_type;
+	msg_hdr->partid = XPC_PARTID(part);
+	msg_hdr->act_state = part->act_state;
+	msg_hdr->rp_ts_jiffies = xpc_rsvd_page->ts_jiffies;
+
+	/* ??? Is holding a spin_lock (ch->lock) during this call a bad idea? */
+	return xpc_send_gru_msg(part->sn.uv.remote_activate_mq_gpa, msg,
+				msg_size);
+}
+
+static void
+xpc_send_activate_IRQ_part_uv(struct xpc_partition *part, void *msg,
+			      size_t msg_size, int msg_type)
+{
+	enum xp_retval ret;
+
+	ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type);
+	if (unlikely(ret != xpSuccess))
+		XPC_DEACTIVATE_PARTITION(part, ret);
+}
+
+static void
+xpc_send_activate_IRQ_ch_uv(struct xpc_channel *ch, unsigned long *irq_flags,
+			 void *msg, size_t msg_size, int msg_type)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->number];
+	enum xp_retval ret;
+
+	ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type);
+	if (unlikely(ret != xpSuccess)) {
+		if (irq_flags != NULL)
+			spin_unlock_irqrestore(&ch->lock, *irq_flags);
+
+		XPC_DEACTIVATE_PARTITION(part, ret);
+
+		if (irq_flags != NULL)
+			spin_lock_irqsave(&ch->lock, *irq_flags);
+	}
+}
+
+static void
+xpc_send_local_activate_IRQ_uv(struct xpc_partition *part, int act_state_req)
+{
+	unsigned long irq_flags;
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+
+	/*
+	 * !!! Make our side think that the remote parition sent an activate
+	 * !!! message our way by doing what the activate IRQ handler would
+	 * !!! do had one really been sent.
+	 */
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	if (part_uv->act_state_req == 0)
+		xpc_activate_IRQ_rcvd++;
+	part_uv->act_state_req = act_state_req;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
+}
+
+static enum xp_retval
+xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa,
+				  size_t *len)
+{
+	/* !!! call the UV version of sn_partition_reserved_page_pa() */
+	return xpUnsupported;
+}
+
+static int
+xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
+{
+	rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq_uv);
+	return 0;
+}
+
+static void
+xpc_send_heartbeat_uv(int msg_type)
+{
+	short partid;
+	struct xpc_partition *part;
+	struct xpc_activate_mq_msg_heartbeat_req_uv msg;
+
+	/*
+	 * !!! On uv we're broadcasting a heartbeat message every 5 seconds.
+	 * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20
+	 * !!! seconds. This is an increase in numalink traffic.
+	 * ??? Is this good?
+	 */
+
+	msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv);
+
+	partid = find_first_bit(xpc_heartbeating_to_mask_uv,
+				XP_MAX_NPARTITIONS_UV);
+
+	while (partid < XP_MAX_NPARTITIONS_UV) {
+		part = &xpc_partitions[partid];
+
+		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+					      msg_type);
+
+		partid = find_next_bit(xpc_heartbeating_to_mask_uv,
+				       XP_MAX_NPARTITIONS_UV, partid + 1);
+	}
+}
+
+static void
+xpc_increment_heartbeat_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV);
+}
+
+static void
+xpc_offline_heartbeat_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+}
+
+static void
+xpc_online_heartbeat_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV);
+}
+
+static void
+xpc_heartbeat_init_uv(void)
+{
+	atomic64_set(&xpc_heartbeat_uv, 0);
+	bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+	xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0];
+}
+
+static void
+xpc_heartbeat_exit_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+}
+
+static enum xp_retval
+xpc_get_remote_heartbeat_uv(struct xpc_partition *part)
+{
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+	enum xp_retval ret = xpNoHeartbeat;
+
+	if (part_uv->remote_act_state != XPC_P_AS_INACTIVE &&
+	    part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) {
+
+		if (part_uv->heartbeat != part->last_heartbeat ||
+		    (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) {
+
+			part->last_heartbeat = part_uv->heartbeat;
+			ret = xpSuccess;
+		}
+	}
+	return ret;
+}
+
+static void
+xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp,
+				    unsigned long remote_rp_gpa, int nasid)
+{
+	short partid = remote_rp->SAL_partid;
+	struct xpc_partition *part = &xpc_partitions[partid];
+	struct xpc_activate_mq_msg_activate_req_uv msg;
+
+	part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */
+	part->remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+	part->sn.uv.remote_activate_mq_gpa = remote_rp->sn.activate_mq_gpa;
+
+	/*
+	 * ??? Is it a good idea to make this conditional on what is
+	 * ??? potentially stale state information?
+	 */
+	if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) {
+		msg.rp_gpa = uv_gpa(xpc_rsvd_page);
+		msg.activate_mq_gpa = xpc_rsvd_page->sn.activate_mq_gpa;
+		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+					   XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV);
+	}
+
+	if (part->act_state == XPC_P_AS_INACTIVE)
+		xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV);
+}
+
+static void
+xpc_request_partition_reactivation_uv(struct xpc_partition *part)
+{
+	xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV);
+}
+
+static void
+xpc_request_partition_deactivation_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_deactivate_req_uv msg;
+
+	/*
+	 * ??? Is it a good idea to make this conditional on what is
+	 * ??? potentially stale state information?
+	 */
+	if (part->sn.uv.remote_act_state != XPC_P_AS_DEACTIVATING &&
+	    part->sn.uv.remote_act_state != XPC_P_AS_INACTIVE) {
+
+		msg.reason = part->reason;
+		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+					 XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV);
+	}
+}
+
+static void
+xpc_cancel_partition_deactivation_request_uv(struct xpc_partition *part)
+{
+	/* nothing needs to be done */
+	return;
+}
+
+static void
+xpc_init_fifo_uv(struct xpc_fifo_head_uv *head)
+{
+	head->first = NULL;
+	head->last = NULL;
+	spin_lock_init(&head->lock);
+	head->n_entries = 0;
+}
+
+static void *
+xpc_get_fifo_entry_uv(struct xpc_fifo_head_uv *head)
+{
+	unsigned long irq_flags;
+	struct xpc_fifo_entry_uv *first;
+
+	spin_lock_irqsave(&head->lock, irq_flags);
+	first = head->first;
+	if (head->first != NULL) {
+		head->first = first->next;
+		if (head->first == NULL)
+			head->last = NULL;
+	}
+	head->n_entries++;
+	spin_unlock_irqrestore(&head->lock, irq_flags);
+	first->next = NULL;
+	return first;
+}
+
+static void
+xpc_put_fifo_entry_uv(struct xpc_fifo_head_uv *head,
+		      struct xpc_fifo_entry_uv *last)
+{
+	unsigned long irq_flags;
+
+	last->next = NULL;
+	spin_lock_irqsave(&head->lock, irq_flags);
+	if (head->last != NULL)
+		head->last->next = last;
+	else
+		head->first = last;
+	head->last = last;
+	head->n_entries--;
+	BUG_ON(head->n_entries < 0);
+	spin_unlock_irqrestore(&head->lock, irq_flags);
+}
+
+static int
+xpc_n_of_fifo_entries_uv(struct xpc_fifo_head_uv *head)
+{
+	return head->n_entries;
+}
+
+/*
+ * Setup the channel structures that are uv specific.
+ */
+static enum xp_retval
+xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
+{
+	struct xpc_channel_uv *ch_uv;
+	int ch_number;
+
+	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+		ch_uv = &part->channels[ch_number].sn.uv;
+
+		xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+		xpc_init_fifo_uv(&ch_uv->recv_msg_list);
+	}
+
+	return xpSuccess;
+}
+
+/*
+ * Teardown the channel structures that are uv specific.
+ */
+static void
+xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part)
+{
+	/* nothing needs to be done */
+	return;
+}
+
+static enum xp_retval
+xpc_make_first_contact_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_uv msg;
+
+	/*
+	 * We send a sync msg to get the remote partition's remote_act_state
+	 * updated to our current act_state which at this point should
+	 * be XPC_P_AS_ACTIVATING.
+	 */
+	xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+				      XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV);
+
+	while (part->sn.uv.remote_act_state != XPC_P_AS_ACTIVATING) {
+
+		dev_dbg(xpc_part, "waiting to make first contact with "
+			"partition %d\n", XPC_PARTID(part));
+
+		/* wait a 1/4 of a second or so */
+		(void)msleep_interruptible(250);
+
+		if (part->act_state == XPC_P_AS_DEACTIVATING)
+			return part->reason;
+	}
+
+	return xpSuccess;
+}
+
+static u64
+xpc_get_chctl_all_flags_uv(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	union xpc_channel_ctl_flags chctl;
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	chctl = part->chctl;
+	if (chctl.all_flags != 0)
+		part->chctl.all_flags = 0;
+
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+	return chctl.all_flags;
+}
+
+static enum xp_retval
+xpc_allocate_send_msg_slot_uv(struct xpc_channel *ch)
+{
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+	struct xpc_send_msg_slot_uv *msg_slot;
+	unsigned long irq_flags;
+	int nentries;
+	int entry;
+	size_t nbytes;
+
+	for (nentries = ch->local_nentries; nentries > 0; nentries--) {
+		nbytes = nentries * sizeof(struct xpc_send_msg_slot_uv);
+		ch_uv->send_msg_slots = kzalloc(nbytes, GFP_KERNEL);
+		if (ch_uv->send_msg_slots == NULL)
+			continue;
+
+		for (entry = 0; entry < nentries; entry++) {
+			msg_slot = &ch_uv->send_msg_slots[entry];
+
+			msg_slot->msg_slot_number = entry;
+			xpc_put_fifo_entry_uv(&ch_uv->msg_slot_free_list,
+					      &msg_slot->next);
+		}
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->local_nentries)
+			ch->local_nentries = nentries;
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	return xpNoMemory;
+}
+
+static enum xp_retval
+xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch)
+{
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+	struct xpc_notify_mq_msg_uv *msg_slot;
+	unsigned long irq_flags;
+	int nentries;
+	int entry;
+	size_t nbytes;
+
+	for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
+		nbytes = nentries * ch->entry_size;
+		ch_uv->recv_msg_slots = kzalloc(nbytes, GFP_KERNEL);
+		if (ch_uv->recv_msg_slots == NULL)
+			continue;
+
+		for (entry = 0; entry < nentries; entry++) {
+			msg_slot = ch_uv->recv_msg_slots + entry *
+			    ch->entry_size;
+
+			msg_slot->hdr.msg_slot_number = entry;
+		}
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->remote_nentries)
+			ch->remote_nentries = nentries;
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	return xpNoMemory;
+}
+
+/*
+ * Allocate msg_slots associated with the channel.
+ */
+static enum xp_retval
+xpc_setup_msg_structures_uv(struct xpc_channel *ch)
+{
+	static enum xp_retval ret;
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+
+	DBUG_ON(ch->flags & XPC_C_SETUP);
+
+	ret = xpc_allocate_send_msg_slot_uv(ch);
+	if (ret == xpSuccess) {
+
+		ret = xpc_allocate_recv_msg_slot_uv(ch);
+		if (ret != xpSuccess) {
+			kfree(ch_uv->send_msg_slots);
+			xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+		}
+	}
+	return ret;
+}
+
+/*
+ * Free up msg_slots and clear other stuff that were setup for the specified
+ * channel.
+ */
+static void
+xpc_teardown_msg_structures_uv(struct xpc_channel *ch)
+{
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+
+	DBUG_ON(!spin_is_locked(&ch->lock));
+
+	ch_uv->remote_notify_mq_gpa = 0;
+
+	if (ch->flags & XPC_C_SETUP) {
+		xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+		kfree(ch_uv->send_msg_slots);
+		xpc_init_fifo_uv(&ch_uv->recv_msg_list);
+		kfree(ch_uv->recv_msg_slots);
+	}
+}
+
+static void
+xpc_send_chctl_closerequest_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_closerequest_uv msg;
+
+	msg.ch_number = ch->number;
+	msg.reason = ch->reason;
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV);
+}
+
+static void
+xpc_send_chctl_closereply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_closereply_uv msg;
+
+	msg.ch_number = ch->number;
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV);
+}
+
+static void
+xpc_send_chctl_openrequest_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_openrequest_uv msg;
+
+	msg.ch_number = ch->number;
+	msg.entry_size = ch->entry_size;
+	msg.local_nentries = ch->local_nentries;
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV);
+}
+
+static void
+xpc_send_chctl_openreply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_openreply_uv msg;
+
+	msg.ch_number = ch->number;
+	msg.local_nentries = ch->local_nentries;
+	msg.remote_nentries = ch->remote_nentries;
+	msg.local_notify_mq_gpa = uv_gpa(xpc_notify_mq_uv);
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV);
+}
+
+static void
+xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	part->chctl.flags[ch_number] |= XPC_CHCTL_MSGREQUEST;
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+	xpc_wakeup_channel_mgr(part);
+}
+
+static void
+xpc_save_remote_msgqueue_pa_uv(struct xpc_channel *ch,
+			       unsigned long msgqueue_pa)
+{
+	ch->sn.uv.remote_notify_mq_gpa = msgqueue_pa;
+}
+
+static void
+xpc_indicate_partition_engaged_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_uv msg;
+
+	xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+				      XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV);
+}
+
+static void
+xpc_indicate_partition_disengaged_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_uv msg;
+
+	xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+				      XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV);
+}
+
+static void
+xpc_assume_partition_disengaged_uv(short partid)
+{
+	struct xpc_partition_uv *part_uv = &xpc_partitions[partid].sn.uv;
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+	part_uv->flags &= ~XPC_P_ENGAGED_UV;
+	spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+}
+
+static int
+xpc_partition_engaged_uv(short partid)
+{
+	return (xpc_partitions[partid].sn.uv.flags & XPC_P_ENGAGED_UV) != 0;
+}
+
+static int
+xpc_any_partition_engaged_uv(void)
+{
+	struct xpc_partition_uv *part_uv;
+	short partid;
+
+	for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+		part_uv = &xpc_partitions[partid].sn.uv;
+		if ((part_uv->flags & XPC_P_ENGAGED_UV) != 0)
+			return 1;
+	}
+	return 0;
+}
+
+static enum xp_retval
+xpc_allocate_msg_slot_uv(struct xpc_channel *ch, u32 flags,
+			 struct xpc_send_msg_slot_uv **address_of_msg_slot)
+{
+	enum xp_retval ret;
+	struct xpc_send_msg_slot_uv *msg_slot;
+	struct xpc_fifo_entry_uv *entry;
+
+	while (1) {
+		entry = xpc_get_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list);
+		if (entry != NULL)
+			break;
+
+		if (flags & XPC_NOWAIT)
+			return xpNoWait;
+
+		ret = xpc_allocate_msg_wait(ch);
+		if (ret != xpInterrupted && ret != xpTimeout)
+			return ret;
+	}
+
+	msg_slot = container_of(entry, struct xpc_send_msg_slot_uv, next);
+	*address_of_msg_slot = msg_slot;
+	return xpSuccess;
+}
+
+static void
+xpc_free_msg_slot_uv(struct xpc_channel *ch,
+		     struct xpc_send_msg_slot_uv *msg_slot)
+{
+	xpc_put_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list, &msg_slot->next);
+
+	/* wakeup anyone waiting for a free msg slot */
+	if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
+		wake_up(&ch->msg_allocate_wq);
+}
+
+static void
+xpc_notify_sender_uv(struct xpc_channel *ch,
+		     struct xpc_send_msg_slot_uv *msg_slot,
+		     enum xp_retval reason)
+{
+	xpc_notify_func func = msg_slot->func;
+
+	if (func != NULL && cmpxchg(&msg_slot->func, func, NULL) == func) {
+
+		atomic_dec(&ch->n_to_notify);
+
+		dev_dbg(xpc_chan, "msg_slot->func() called, msg_slot=0x%p "
+			"msg_slot_number=%d partid=%d channel=%d\n", msg_slot,
+			msg_slot->msg_slot_number, ch->partid, ch->number);
+
+		func(reason, ch->partid, ch->number, msg_slot->key);
+
+		dev_dbg(xpc_chan, "msg_slot->func() returned, msg_slot=0x%p "
+			"msg_slot_number=%d partid=%d channel=%d\n", msg_slot,
+			msg_slot->msg_slot_number, ch->partid, ch->number);
+	}
+}
+
+static void
+xpc_handle_notify_mq_ack_uv(struct xpc_channel *ch,
+			    struct xpc_notify_mq_msg_uv *msg)
+{
+	struct xpc_send_msg_slot_uv *msg_slot;
+	int entry = msg->hdr.msg_slot_number % ch->local_nentries;
+
+	msg_slot = &ch->sn.uv.send_msg_slots[entry];
+
+	BUG_ON(msg_slot->msg_slot_number != msg->hdr.msg_slot_number);
+	msg_slot->msg_slot_number += ch->local_nentries;
+
+	if (msg_slot->func != NULL)
+		xpc_notify_sender_uv(ch, msg_slot, xpMsgDelivered);
+
+	xpc_free_msg_slot_uv(ch, msg_slot);
+}
+
+static void
+xpc_handle_notify_mq_msg_uv(struct xpc_partition *part,
+			    struct xpc_notify_mq_msg_uv *msg)
+{
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+	struct xpc_channel *ch;
+	struct xpc_channel_uv *ch_uv;
+	struct xpc_notify_mq_msg_uv *msg_slot;
+	unsigned long irq_flags;
+	int ch_number = msg->hdr.ch_number;
+
+	if (unlikely(ch_number >= part->nchannels)) {
+		dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received invalid "
+			"channel number=0x%x in message from partid=%d\n",
+			ch_number, XPC_PARTID(part));
+
+		/* get hb checker to deactivate from the remote partition */
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+		part_uv->reason = xpBadChannelNumber;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		wake_up_interruptible(&xpc_activate_IRQ_wq);
+		return;
+	}
+
+	ch = &part->channels[ch_number];
+	xpc_msgqueue_ref(ch);
+
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	/* see if we're really dealing with an ACK for a previously sent msg */
+	if (msg->hdr.size == 0) {
+		xpc_handle_notify_mq_ack_uv(ch, msg);
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	/* we're dealing with a normal message sent via the notify_mq */
+	ch_uv = &ch->sn.uv;
+
+	msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots +
+		    (msg->hdr.msg_slot_number % ch->remote_nentries) *
+		    ch->entry_size);
+
+	BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number);
+	BUG_ON(msg_slot->hdr.size != 0);
+
+	memcpy(msg_slot, msg, msg->hdr.size);
+
+	xpc_put_fifo_entry_uv(&ch_uv->recv_msg_list, &msg_slot->hdr.u.next);
+
+	if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) {
+		/*
+		 * If there is an existing idle kthread get it to deliver
+		 * the payload, otherwise we'll have to get the channel mgr
+		 * for this partition to create a kthread to do the delivery.
+		 */
+		if (atomic_read(&ch->kthreads_idle) > 0)
+			wake_up_nr(&ch->idle_wq, 1);
+		else
+			xpc_send_chctl_local_msgrequest_uv(part, ch->number);
+	}
+	xpc_msgqueue_deref(ch);
+}
+
+static irqreturn_t
+xpc_handle_notify_IRQ_uv(int irq, void *dev_id)
+{
+	struct xpc_notify_mq_msg_uv *msg;
+	short partid;
+	struct xpc_partition *part;
+
+	while ((msg = gru_get_next_message(xpc_notify_mq_uv)) != NULL) {
+
+		partid = msg->hdr.partid;
+		if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) {
+			dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received "
+				"invalid partid=0x%x in message\n", partid);
+		} else {
+			part = &xpc_partitions[partid];
+
+			if (xpc_part_ref(part)) {
+				xpc_handle_notify_mq_msg_uv(part, msg);
+				xpc_part_deref(part);
+			}
+		}
+
+		gru_free_message(xpc_notify_mq_uv, msg);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int
+xpc_n_of_deliverable_payloads_uv(struct xpc_channel *ch)
+{
+	return xpc_n_of_fifo_entries_uv(&ch->sn.uv.recv_msg_list);
+}
+
+static void
+xpc_process_msg_chctl_flags_uv(struct xpc_partition *part, int ch_number)
+{
+	struct xpc_channel *ch = &part->channels[ch_number];
+	int ndeliverable_payloads;
+
+	xpc_msgqueue_ref(ch);
+
+	ndeliverable_payloads = xpc_n_of_deliverable_payloads_uv(ch);
+
+	if (ndeliverable_payloads > 0 &&
+	    (ch->flags & XPC_C_CONNECTED) &&
+	    (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)) {
+
+		xpc_activate_kthreads(ch, ndeliverable_payloads);
+	}
+
+	xpc_msgqueue_deref(ch);
+}
+
+static enum xp_retval
+xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload,
+		    u16 payload_size, u8 notify_type, xpc_notify_func func,
+		    void *key)
+{
+	enum xp_retval ret = xpSuccess;
+	struct xpc_send_msg_slot_uv *msg_slot = NULL;
+	struct xpc_notify_mq_msg_uv *msg;
+	u8 msg_buffer[XPC_NOTIFY_MSG_SIZE_UV];
+	size_t msg_size;
+
+	DBUG_ON(notify_type != XPC_N_CALL);
+
+	msg_size = sizeof(struct xpc_notify_mq_msghdr_uv) + payload_size;
+	if (msg_size > ch->entry_size)
+		return xpPayloadTooBig;
+
+	xpc_msgqueue_ref(ch);
+
+	if (ch->flags & XPC_C_DISCONNECTING) {
+		ret = ch->reason;
+		goto out_1;
+	}
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		ret = xpNotConnected;
+		goto out_1;
+	}
+
+	ret = xpc_allocate_msg_slot_uv(ch, flags, &msg_slot);
+	if (ret != xpSuccess)
+		goto out_1;
+
+	if (func != NULL) {
+		atomic_inc(&ch->n_to_notify);
+
+		msg_slot->key = key;
+		wmb(); /* a non-NULL func must hit memory after the key */
+		msg_slot->func = func;
+
+		if (ch->flags & XPC_C_DISCONNECTING) {
+			ret = ch->reason;
+			goto out_2;
+		}
+	}
+
+	msg = (struct xpc_notify_mq_msg_uv *)&msg_buffer;
+	msg->hdr.partid = xp_partition_id;
+	msg->hdr.ch_number = ch->number;
+	msg->hdr.size = msg_size;
+	msg->hdr.msg_slot_number = msg_slot->msg_slot_number;
+	memcpy(&msg->payload, payload, payload_size);
+
+	ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg, msg_size);
+	if (ret == xpSuccess)
+		goto out_1;
+
+	XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
+out_2:
+	if (func != NULL) {
+		/*
+		 * Try to NULL the msg_slot's func field. If we fail, then
+		 * xpc_notify_senders_of_disconnect_uv() beat us to it, in which
+		 * case we need to pretend we succeeded to send the message
+		 * since the user will get a callout for the disconnect error
+		 * by xpc_notify_senders_of_disconnect_uv(), and to also get an
+		 * error returned here will confuse them. Additionally, since
+		 * in this case the channel is being disconnected we don't need
+		 * to put the the msg_slot back on the free list.
+		 */
+		if (cmpxchg(&msg_slot->func, func, NULL) != func) {
+			ret = xpSuccess;
+			goto out_1;
+		}
+
+		msg_slot->key = NULL;
+		atomic_dec(&ch->n_to_notify);
+	}
+	xpc_free_msg_slot_uv(ch, msg_slot);
+out_1:
+	xpc_msgqueue_deref(ch);
+	return ret;
+}
+
+/*
+ * Tell the callers of xpc_send_notify() that the status of their payloads
+ * is unknown because the channel is now disconnecting.
+ *
+ * We don't worry about putting these msg_slots on the free list since the
+ * msg_slots themselves are about to be kfree'd.
+ */
+static void
+xpc_notify_senders_of_disconnect_uv(struct xpc_channel *ch)
+{
+	struct xpc_send_msg_slot_uv *msg_slot;
+	int entry;
+
+	DBUG_ON(!(ch->flags & XPC_C_DISCONNECTING));
+
+	for (entry = 0; entry < ch->local_nentries; entry++) {
+
+		if (atomic_read(&ch->n_to_notify) == 0)
+			break;
+
+		msg_slot = &ch->sn.uv.send_msg_slots[entry];
+		if (msg_slot->func != NULL)
+			xpc_notify_sender_uv(ch, msg_slot, ch->reason);
+	}
+}
+
+/*
+ * Get the next deliverable message's payload.
+ */
+static void *
+xpc_get_deliverable_payload_uv(struct xpc_channel *ch)
+{
+	struct xpc_fifo_entry_uv *entry;
+	struct xpc_notify_mq_msg_uv *msg;
+	void *payload = NULL;
+
+	if (!(ch->flags & XPC_C_DISCONNECTING)) {
+		entry = xpc_get_fifo_entry_uv(&ch->sn.uv.recv_msg_list);
+		if (entry != NULL) {
+			msg = container_of(entry, struct xpc_notify_mq_msg_uv,
+					   hdr.u.next);
+			payload = &msg->payload;
+		}
+	}
+	return payload;
+}
+
+static void
+xpc_received_payload_uv(struct xpc_channel *ch, void *payload)
+{
+	struct xpc_notify_mq_msg_uv *msg;
+	enum xp_retval ret;
+
+	msg = container_of(payload, struct xpc_notify_mq_msg_uv, payload);
+
+	/* return an ACK to the sender of this message */
+
+	msg->hdr.partid = xp_partition_id;
+	msg->hdr.size = 0;	/* size of zero indicates this is an ACK */
+
+	ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg,
+			       sizeof(struct xpc_notify_mq_msghdr_uv));
+	if (ret != xpSuccess)
+		XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
+
+	msg->hdr.msg_slot_number += ch->remote_nentries;
+}
+
+int
+xpc_init_uv(void)
+{
+	xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv;
+	xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
+	xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
+	xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
+	xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
+	xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
+	xpc_online_heartbeat = xpc_online_heartbeat_uv;
+	xpc_heartbeat_init = xpc_heartbeat_init_uv;
+	xpc_heartbeat_exit = xpc_heartbeat_exit_uv;
+	xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv;
+
+	xpc_request_partition_activation = xpc_request_partition_activation_uv;
+	xpc_request_partition_reactivation =
+	    xpc_request_partition_reactivation_uv;
+	xpc_request_partition_deactivation =
+	    xpc_request_partition_deactivation_uv;
+	xpc_cancel_partition_deactivation_request =
+	    xpc_cancel_partition_deactivation_request_uv;
+
+	xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv;
+	xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv;
+
+	xpc_make_first_contact = xpc_make_first_contact_uv;
+
+	xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv;
+	xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv;
+	xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
+	xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
+	xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
+
+	xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
+
+	xpc_setup_msg_structures = xpc_setup_msg_structures_uv;
+	xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv;
+
+	xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv;
+	xpc_indicate_partition_disengaged =
+	    xpc_indicate_partition_disengaged_uv;
+	xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv;
+	xpc_partition_engaged = xpc_partition_engaged_uv;
+	xpc_any_partition_engaged = xpc_any_partition_engaged_uv;
+
+	xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv;
+	xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv;
+	xpc_send_payload = xpc_send_payload_uv;
+	xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv;
+	xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv;
+	xpc_received_payload = xpc_received_payload_uv;
+
+	if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
+		dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n",
+			XPC_MSG_HDR_MAX_SIZE);
+		return -E2BIG;
+	}
+
+	/* ??? The cpuid argument's value is 0, is that what we want? */
+	/* !!! The irq argument's value isn't correct. */
+	xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, 0,
+						  xpc_handle_activate_IRQ_uv);
+	if (xpc_activate_mq_uv == NULL)
+		return -ENOMEM;
+
+	/* ??? The cpuid argument's value is 0, is that what we want? */
+	/* !!! The irq argument's value isn't correct. */
+	xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, 0,
+						xpc_handle_notify_IRQ_uv);
+	if (xpc_notify_mq_uv == NULL) {
+		/* !!! The irq argument's value isn't correct. */
+		xpc_destroy_gru_mq_uv(xpc_activate_mq_uv,
+				      XPC_ACTIVATE_MQ_SIZE_UV, 0);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void
+xpc_exit_uv(void)
+{
+	/* !!! The irq argument's value isn't correct. */
+	xpc_destroy_gru_mq_uv(xpc_notify_mq_uv, XPC_NOTIFY_MQ_SIZE_UV, 0);
+
+	/* !!! The irq argument's value isn't correct. */
+	xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, XPC_ACTIVATE_MQ_SIZE_UV, 0);
+}
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 822dc8e8d7f..71513b3af70 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -21,21 +21,8 @@
  */
 
 #include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/io.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/atomic.h>
 #include "xp.h"
 
 /*
@@ -57,7 +44,7 @@ struct xpnet_message {
 	u16 version;		/* Version for this message */
 	u16 embedded_bytes;	/* #of bytes embedded in XPC message */
 	u32 magic;		/* Special number indicating this is xpnet */
-	u64 buf_pa;		/* phys address of buffer to retrieve */
+	unsigned long buf_pa;	/* phys address of buffer to retrieve */
 	u32 size;		/* #of bytes in buffer */
 	u8 leadin_ignore;	/* #of bytes to ignore at the beginning */
 	u8 tailout_ignore;	/* #of bytes to ignore at the end */
@@ -70,11 +57,10 @@ struct xpnet_message {
  *
  * XPC expects each message to exist in an individual cacheline.
  */
-#define XPNET_MSG_SIZE		(L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
+#define XPNET_MSG_SIZE		XPC_MSG_PAYLOAD_MAX_SIZE
 #define XPNET_MSG_DATA_MAX	\
-		(XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
-#define XPNET_MSG_ALIGNED_SIZE	(L1_CACHE_ALIGN(XPNET_MSG_SIZE))
-#define XPNET_MSG_NENTRIES	(PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)
+		(XPNET_MSG_SIZE - offsetof(struct xpnet_message, data))
+#define XPNET_MSG_NENTRIES	(PAGE_SIZE / XPC_MSG_MAX_SIZE)
 
 #define XPNET_MAX_KTHREADS	(XPNET_MSG_NENTRIES + 1)
 #define XPNET_MAX_IDLE_KTHREADS	(XPNET_MSG_NENTRIES + 1)
@@ -105,7 +91,6 @@ struct xpnet_message {
  * then be released.
  */
 struct xpnet_pending_msg {
-	struct list_head free_list;
 	struct sk_buff *skb;
 	atomic_t use_count;
 };
@@ -121,7 +106,7 @@ struct net_device *xpnet_device;
  * When we are notified of other partitions activating, we add them to
  * our bitmask of partitions to which we broadcast.
  */
-static u64 xpnet_broadcast_partitions;
+static unsigned long *xpnet_broadcast_partitions;
 /* protect above */
 static DEFINE_SPINLOCK(xpnet_broadcast_lock);
 
@@ -141,16 +126,13 @@ static DEFINE_SPINLOCK(xpnet_broadcast_lock);
 #define XPNET_DEF_MTU (0x8000UL)
 
 /*
- * The partition id is encapsulated in the MAC address.  The following
- * define locates the octet the partid is in.
+ * The partid is encapsulated in the MAC address beginning in the following
+ * octet and it consists of two octets.
  */
-#define XPNET_PARTID_OCTET	1
-#define XPNET_LICENSE_OCTET	2
+#define XPNET_PARTID_OCTET	2
+
+/* Define the XPNET debug device structures to be used with dev_dbg() et al */
 
-/*
- * Define the XPNET debug device structure that is to be used with dev_dbg(),
- * dev_err(), dev_warn(), and dev_info().
- */
 struct device_driver xpnet_dbg_name = {
 	.name = "xpnet"
 };
@@ -169,7 +151,8 @@ static void
 xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 {
 	struct sk_buff *skb;
-	bte_result_t bret;
+	void *dst;
+	enum xp_retval ret;
 	struct xpnet_dev_private *priv =
 	    (struct xpnet_dev_private *)xpnet_device->priv;
 
@@ -201,7 +184,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 
 	/*
 	 * The allocated skb has some reserved space.
-	 * In order to use bte_copy, we need to get the
+	 * In order to use xp_remote_memcpy(), we need to get the
 	 * skb->data pointer moved forward.
 	 */
 	skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
@@ -226,26 +209,21 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 		skb_copy_to_linear_data(skb, &msg->data,
 					(size_t)msg->embedded_bytes);
 	} else {
+		dst = (void *)((u64)skb->data & ~(L1_CACHE_BYTES - 1));
 		dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
-			"bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
-			(void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
-			msg->size);
-
-		bret = bte_copy(msg->buf_pa,
-				__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
-				msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+			"xp_remote_memcpy(0x%p, 0x%p, %hu)\n", dst,
+					  (void *)msg->buf_pa, msg->size);
 
-		if (bret != BTE_SUCCESS) {
+		ret = xp_remote_memcpy(xp_pa(dst), msg->buf_pa, msg->size);
+		if (ret != xpSuccess) {
 			/*
-			 * >>> Need better way of cleaning skb.  Currently skb
-			 * >>> appears in_use and we can't just call
-			 * >>> dev_kfree_skb.
+			 * !!! Need better way of cleaning skb.  Currently skb
+			 * !!! appears in_use and we can't just call
+			 * !!! dev_kfree_skb.
 			 */
-			dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
-				"error=0x%x\n", (void *)msg->buf_pa,
-				(void *)__pa((u64)skb->data &
-					     ~(L1_CACHE_BYTES - 1)),
-				msg->size, bret);
+			dev_err(xpnet, "xp_remote_memcpy(0x%p, 0x%p, 0x%hx) "
+				"returned error=0x%x\n", dst,
+				(void *)msg->buf_pa, msg->size, ret);
 
 			xpc_received(partid, channel, (void *)msg);
 
@@ -285,9 +263,7 @@ static void
 xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
 			  void *data, void *key)
 {
-	long bp;
-
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(channel != XPC_NET_CHANNEL);
 
 	switch (reason) {
@@ -299,31 +275,28 @@ xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
 
 	case xpConnected:	/* connection completed to a partition */
 		spin_lock_bh(&xpnet_broadcast_lock);
-		xpnet_broadcast_partitions |= 1UL << (partid - 1);
-		bp = xpnet_broadcast_partitions;
+		__set_bit(partid, xpnet_broadcast_partitions);
 		spin_unlock_bh(&xpnet_broadcast_lock);
 
 		netif_carrier_on(xpnet_device);
 
-		dev_dbg(xpnet, "%s connection created to partition %d; "
-			"xpnet_broadcast_partitions=0x%lx\n",
-			xpnet_device->name, partid, bp);
+		dev_dbg(xpnet, "%s connected to partition %d\n",
+			xpnet_device->name, partid);
 		break;
 
 	default:
 		spin_lock_bh(&xpnet_broadcast_lock);
-		xpnet_broadcast_partitions &= ~(1UL << (partid - 1));
-		bp = xpnet_broadcast_partitions;
+		__clear_bit(partid, xpnet_broadcast_partitions);
 		spin_unlock_bh(&xpnet_broadcast_lock);
 
-		if (bp == 0)
+		if (bitmap_empty((unsigned long *)xpnet_broadcast_partitions,
+				 xp_max_npartitions)) {
 			netif_carrier_off(xpnet_device);
+		}
 
-		dev_dbg(xpnet, "%s disconnected from partition %d; "
-			"xpnet_broadcast_partitions=0x%lx\n",
-			xpnet_device->name, partid, bp);
+		dev_dbg(xpnet, "%s disconnected from partition %d\n",
+			xpnet_device->name, partid);
 		break;
-
 	}
 }
 
@@ -334,8 +307,10 @@ xpnet_dev_open(struct net_device *dev)
 
 	dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
 		"%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
-		XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
-		XPNET_MAX_IDLE_KTHREADS);
+		(unsigned long)XPNET_MSG_SIZE,
+		(unsigned long)XPNET_MSG_NENTRIES,
+		(unsigned long)XPNET_MAX_KTHREADS,
+		(unsigned long)XPNET_MAX_IDLE_KTHREADS);
 
 	ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
 			  XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
@@ -426,35 +401,74 @@ xpnet_send_completed(enum xp_retval reason, short partid, int channel,
 	}
 }
 
+static void
+xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg,
+	   u64 start_addr, u64 end_addr, u16 embedded_bytes, int dest_partid)
+{
+	u8 msg_buffer[XPNET_MSG_SIZE];
+	struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer;
+	u16 msg_size = sizeof(struct xpnet_message);
+	enum xp_retval ret;
+
+	msg->embedded_bytes = embedded_bytes;
+	if (unlikely(embedded_bytes != 0)) {
+		msg->version = XPNET_VERSION_EMBED;
+		dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
+			&msg->data, skb->data, (size_t)embedded_bytes);
+		skb_copy_from_linear_data(skb, &msg->data,
+					  (size_t)embedded_bytes);
+		msg_size += embedded_bytes - 1;
+	} else {
+		msg->version = XPNET_VERSION;
+	}
+	msg->magic = XPNET_MAGIC;
+	msg->size = end_addr - start_addr;
+	msg->leadin_ignore = (u64)skb->data - start_addr;
+	msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
+	msg->buf_pa = xp_pa((void *)start_addr);
+
+	dev_dbg(xpnet, "sending XPC message to %d:%d\n"
+		KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
+		"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
+		dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
+		msg->leadin_ignore, msg->tailout_ignore);
+
+	atomic_inc(&queued_msg->use_count);
+
+	ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, msg,
+			      msg_size, xpnet_send_completed, queued_msg);
+	if (unlikely(ret != xpSuccess))
+		atomic_dec(&queued_msg->use_count);
+}
+
 /*
  * Network layer has formatted a packet (skb) and is ready to place it
  * "on the wire".  Prepare and send an xpnet_message to all partitions
  * which have connected with us and are targets of this packet.
  *
  * MAC-NOTE:  For the XPNET driver, the MAC address contains the
- * destination partition_id.  If the destination partition id word
- * is 0xff, this packet is to broadcast to all partitions.
+ * destination partid.  If the destination partid octets are 0xffff,
+ * this packet is to be broadcast to all connected partitions.
  */
 static int
 xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct xpnet_pending_msg *queued_msg;
-	enum xp_retval ret;
-	struct xpnet_message *msg;
 	u64 start_addr, end_addr;
-	long dp;
-	u8 second_mac_octet;
 	short dest_partid;
-	struct xpnet_dev_private *priv;
-	u16 embedded_bytes;
-
-	priv = (struct xpnet_dev_private *)dev->priv;
+	struct xpnet_dev_private *priv = (struct xpnet_dev_private *)dev->priv;
+	u16 embedded_bytes = 0;
 
 	dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
 		"skb->end=0x%p skb->len=%d\n", (void *)skb->head,
 		(void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
 		skb->len);
 
+	if (skb->data[0] == 0x33) {
+		dev_kfree_skb(skb);
+		return 0;	/* nothing needed to be done */
+	}
+
 	/*
 	 * The xpnet_pending_msg tracks how many outstanding
 	 * xpc_send_notifies are relying on this skb.  When none
@@ -466,7 +480,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			 "packet\n", sizeof(struct xpnet_pending_msg));
 
 		priv->stats.tx_errors++;
-
 		return -ENOMEM;
 	}
 
@@ -475,7 +488,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb));
 
 	/* calculate how many bytes to embed in the XPC message */
-	embedded_bytes = 0;
 	if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
 		/* skb->data does fit so embed */
 		embedded_bytes = skb->len;
@@ -491,82 +503,28 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	atomic_set(&queued_msg->use_count, 1);
 	queued_msg->skb = skb;
 
-	second_mac_octet = skb->data[XPNET_PARTID_OCTET];
-	if (second_mac_octet == 0xff) {
+	if (skb->data[0] == 0xff) {
 		/* we are being asked to broadcast to all partitions */
-		dp = xpnet_broadcast_partitions;
-	} else if (second_mac_octet != 0) {
-		dp = xpnet_broadcast_partitions &
-		    (1UL << (second_mac_octet - 1));
-	} else {
-		/* 0 is an invalid partid.  Ignore */
-		dp = 0;
-	}
-	dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);
-
-	/*
-	 * If we wanted to allow promiscuous mode to work like an
-	 * unswitched network, this would be a good point to OR in a
-	 * mask of partitions which should be receiving all packets.
-	 */
-
-	/*
-	 * Main send loop.
-	 */
-	for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
-	     dest_partid++) {
+		for_each_bit(dest_partid, xpnet_broadcast_partitions,
+			     xp_max_npartitions) {
 
-		if (!(dp & (1UL << (dest_partid - 1)))) {
-			/* not destined for this partition */
-			continue;
+			xpnet_send(skb, queued_msg, start_addr, end_addr,
+				   embedded_bytes, dest_partid);
 		}
+	} else {
+		dest_partid = (short)skb->data[XPNET_PARTID_OCTET + 1];
+		dest_partid |= (short)skb->data[XPNET_PARTID_OCTET + 0] << 8;
 
-		/* remove this partition from the destinations mask */
-		dp &= ~(1UL << (dest_partid - 1));
-
-		/* found a partition to send to */
-
-		ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
-				   XPC_NOWAIT, (void **)&msg);
-		if (unlikely(ret != xpSuccess))
-			continue;
-
-		msg->embedded_bytes = embedded_bytes;
-		if (unlikely(embedded_bytes != 0)) {
-			msg->version = XPNET_VERSION_EMBED;
-			dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
-				&msg->data, skb->data, (size_t)embedded_bytes);
-			skb_copy_from_linear_data(skb, &msg->data,
-						  (size_t)embedded_bytes);
-		} else {
-			msg->version = XPNET_VERSION;
-		}
-		msg->magic = XPNET_MAGIC;
-		msg->size = end_addr - start_addr;
-		msg->leadin_ignore = (u64)skb->data - start_addr;
-		msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
-		msg->buf_pa = __pa(start_addr);
-
-		dev_dbg(xpnet, "sending XPC message to %d:%d\n"
-			KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
-			"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
-			dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
-			msg->leadin_ignore, msg->tailout_ignore);
-
-		atomic_inc(&queued_msg->use_count);
-
-		ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
-				      xpnet_send_completed, queued_msg);
-		if (unlikely(ret != xpSuccess)) {
-			atomic_dec(&queued_msg->use_count);
-			continue;
+		if (dest_partid >= 0 &&
+		    dest_partid < xp_max_npartitions &&
+		    test_bit(dest_partid, xpnet_broadcast_partitions) != 0) {
+
+			xpnet_send(skb, queued_msg, start_addr, end_addr,
+				   embedded_bytes, dest_partid);
 		}
 	}
 
 	if (atomic_dec_return(&queued_msg->use_count) == 0) {
-		dev_dbg(xpnet, "no partitions to receive packet destined for "
-			"%d\n", dest_partid);
-
 		dev_kfree_skb(skb);
 		kfree(queued_msg);
 	}
@@ -594,23 +552,28 @@ xpnet_dev_tx_timeout(struct net_device *dev)
 static int __init
 xpnet_init(void)
 {
-	int i;
-	u32 license_num;
-	int result = -ENOMEM;
+	int result;
 
-	if (!ia64_platform_is("sn2"))
+	if (!is_shub() && !is_uv())
 		return -ENODEV;
 
 	dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
 
+	xpnet_broadcast_partitions = kzalloc(BITS_TO_LONGS(xp_max_npartitions) *
+					     sizeof(long), GFP_KERNEL);
+	if (xpnet_broadcast_partitions == NULL)
+		return -ENOMEM;
+
 	/*
 	 * use ether_setup() to init the majority of our device
 	 * structure and then override the necessary pieces.
 	 */
 	xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
 				    XPNET_DEVICE_NAME, ether_setup);
-	if (xpnet_device == NULL)
+	if (xpnet_device == NULL) {
+		kfree(xpnet_broadcast_partitions);
 		return -ENOMEM;
+	}
 
 	netif_carrier_off(xpnet_device);
 
@@ -628,14 +591,10 @@ xpnet_init(void)
 	 * MAC addresses.  We chose the first octet of the MAC to be unlikely
 	 * to collide with any vendor's officially issued MAC.
 	 */
-	xpnet_device->dev_addr[0] = 0xfe;
-	xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
-	license_num = sn_partition_serial_number_val();
-	for (i = 3; i >= 0; i--) {
-		xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
-		    license_num & 0xff;
-		license_num = license_num >> 8;
-	}
+	xpnet_device->dev_addr[0] = 0x02;     /* locally administered, no OUI */
+
+	xpnet_device->dev_addr[XPNET_PARTID_OCTET + 1] = xp_partition_id;
+	xpnet_device->dev_addr[XPNET_PARTID_OCTET + 0] = (xp_partition_id >> 8);
 
 	/*
 	 * ether_setup() sets this to a multicast device.  We are
@@ -651,8 +610,10 @@ xpnet_init(void)
 	xpnet_device->features = NETIF_F_NO_CSUM;
 
 	result = register_netdev(xpnet_device);
-	if (result != 0)
+	if (result != 0) {
 		free_netdev(xpnet_device);
+		kfree(xpnet_broadcast_partitions);
+	}
 
 	return result;
 }
@@ -666,8 +627,8 @@ xpnet_exit(void)
 		 xpnet_device[0].name);
 
 	unregister_netdev(xpnet_device);
-
 	free_netdev(xpnet_device);
+	kfree(xpnet_broadcast_partitions);
 }
 
 module_exit(xpnet_exit);
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index d3eb7903c34..6b9300779a4 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -3086,7 +3086,6 @@ static struct ibm_struct wan_driver_data = {
 	.read = wan_read,
 	.write = wan_write,
 	.exit = wan_exit,
-	.flags.experimental = 1,
 };
 
 /*************************************************************************
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 66e5a5487c2..ebc8b9d7761 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -103,8 +103,10 @@ static int mmc_blk_open(struct inode *inode, struct file *filp)
 			check_disk_change(inode->i_bdev);
 		ret = 0;
 
-		if ((filp->f_mode & FMODE_WRITE) && md->read_only)
+		if ((filp->f_mode & FMODE_WRITE) && md->read_only) {
+			mmc_blk_put(md);
 			ret = -EROFS;
+		}
 	}
 
 	return ret;
@@ -213,7 +215,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	struct mmc_blk_data *md = mq->data;
 	struct mmc_card *card = md->queue.card;
 	struct mmc_blk_request brq;
-	int ret = 1, sg_pos, data_size;
+	int ret = 1, data_size, i;
+	struct scatterlist *sg;
 
 	mmc_claim_host(card->host);
 
@@ -267,18 +270,22 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 
 		mmc_queue_bounce_pre(mq);
 
+		/*
+		 * Adjust the sg list so it is the same size as the
+		 * request.
+		 */
 		if (brq.data.blocks !=
 		    (req->nr_sectors >> (md->block_bits - 9))) {
 			data_size = brq.data.blocks * brq.data.blksz;
-			for (sg_pos = 0; sg_pos < brq.data.sg_len; sg_pos++) {
-				data_size -= mq->sg[sg_pos].length;
+			for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) {
+				data_size -= sg->length;
 				if (data_size <= 0) {
-					mq->sg[sg_pos].length += data_size;
-					sg_pos++;
+					sg->length += data_size;
+					i++;
 					break;
 				}
 			}
-			brq.data.sg_len = sg_pos;
+			brq.data.sg_len = i;
 		}
 
 		mmc_wait_for_req(card->host, &brq.mrq);
@@ -608,14 +615,19 @@ static struct mmc_driver mmc_driver = {
 
 static int __init mmc_blk_init(void)
 {
-	int res = -ENOMEM;
+	int res;
 
 	res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
 	if (res)
 		goto out;
 
-	return mmc_register_driver(&mmc_driver);
+	res = mmc_register_driver(&mmc_driver);
+	if (res)
+		goto out2;
 
+	return 0;
+ out2:
+	unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
  out:
 	return res;
 }
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index a067fe43630..b92b172074e 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -388,16 +388,14 @@ static int mmc_test_transfer(struct mmc_test_card *test,
 	int ret, i;
 	unsigned long flags;
 
-	BUG_ON(blocks * blksz > BUFFER_SIZE);
-
 	if (write) {
 		for (i = 0;i < blocks * blksz;i++)
 			test->scratch[i] = i;
 	} else {
-		memset(test->scratch, 0, blocks * blksz);
+		memset(test->scratch, 0, BUFFER_SIZE);
 	}
 	local_irq_save(flags);
-	sg_copy_from_buffer(sg, sg_len, test->scratch, blocks * blksz);
+	sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
 	local_irq_restore(flags);
 
 	ret = mmc_test_set_blksize(test, blksz);
@@ -444,7 +442,7 @@ static int mmc_test_transfer(struct mmc_test_card *test,
 		}
 	} else {
 		local_irq_save(flags);
-		sg_copy_to_buffer(sg, sg_len, test->scratch, blocks * blksz);
+		sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
 		local_irq_restore(flags);
 		for (i = 0;i < blocks * blksz;i++) {
 			if (test->scratch[i] != (u8)i)
@@ -805,69 +803,6 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test)
 	return 0;
 }
 
-static int mmc_test_bigsg_write(struct mmc_test_card *test)
-{
-	int ret;
-	unsigned int size;
-	struct scatterlist sg;
-
-	if (test->card->host->max_blk_count == 1)
-		return RESULT_UNSUP_HOST;
-
-	size = PAGE_SIZE * 2;
-	size = min(size, test->card->host->max_req_size);
-	size = min(size, test->card->host->max_seg_size);
-	size = min(size, test->card->host->max_blk_count * 512);
-
-	memset(test->buffer, 0, BUFFER_SIZE);
-
-	if (size < 1024)
-		return RESULT_UNSUP_HOST;
-
-	sg_init_table(&sg, 1);
-	sg_init_one(&sg, test->buffer, BUFFER_SIZE);
-
-	ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int mmc_test_bigsg_read(struct mmc_test_card *test)
-{
-	int ret, i;
-	unsigned int size;
-	struct scatterlist sg;
-
-	if (test->card->host->max_blk_count == 1)
-		return RESULT_UNSUP_HOST;
-
-	size = PAGE_SIZE * 2;
-	size = min(size, test->card->host->max_req_size);
-	size = min(size, test->card->host->max_seg_size);
-	size = min(size, test->card->host->max_blk_count * 512);
-
-	if (size < 1024)
-		return RESULT_UNSUP_HOST;
-
-	memset(test->buffer, 0xCD, BUFFER_SIZE);
-
-	sg_init_table(&sg, 1);
-	sg_init_one(&sg, test->buffer, BUFFER_SIZE);
-	ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
-	if (ret)
-		return ret;
-
-	/* mmc_test_transfer() doesn't check for read overflows */
-	for (i = size;i < BUFFER_SIZE;i++) {
-		if (test->buffer[i] != 0xCD)
-			return RESULT_FAIL;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_HIGHMEM
 
 static int mmc_test_write_high(struct mmc_test_card *test)
@@ -1071,20 +1006,6 @@ static const struct mmc_test_case mmc_test_cases[] = {
 		.run = mmc_test_multi_xfersize_read,
 	},
 
-	{
-		.name = "Over-sized SG list write",
-		.prepare = mmc_test_prepare_write,
-		.run = mmc_test_bigsg_write,
-		.cleanup = mmc_test_cleanup,
-	},
-
-	{
-		.name = "Over-sized SG list read",
-		.prepare = mmc_test_prepare_read,
-		.run = mmc_test_bigsg_read,
-		.cleanup = mmc_test_cleanup,
-	},
-
 #ifdef CONFIG_HIGHMEM
 
 	{
@@ -1119,7 +1040,7 @@ static const struct mmc_test_case mmc_test_cases[] = {
 
 };
 
-static struct mutex mmc_test_lock;
+static DEFINE_MUTEX(mmc_test_lock);
 
 static void mmc_test_run(struct mmc_test_card *test, int testcase)
 {
@@ -1250,8 +1171,6 @@ static int mmc_test_probe(struct mmc_card *card)
 	if ((card->type != MMC_TYPE_MMC) && (card->type != MMC_TYPE_SD))
 		return -ENODEV;
 
-	mutex_init(&mmc_test_lock);
-
 	ret = device_create_file(&card->dev, &dev_attr_test);
 	if (ret)
 		return ret;
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 3ee5b8c3b5c..044d84eeed7 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -121,6 +121,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
 #ifdef CONFIG_MMC_DEBUG
 	unsigned int i, sz;
+	struct scatterlist *sg;
 #endif
 
 	pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
@@ -156,8 +157,8 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 
 #ifdef CONFIG_MMC_DEBUG
 		sz = 0;
-		for (i = 0;i < mrq->data->sg_len;i++)
-			sz += mrq->data->sg[i].length;
+		for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i)
+			sz += sg->length;
 		BUG_ON(sz != mrq->data->blocks * mrq->data->blksz);
 #endif
 
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dc6f2579f85..ea8d7a3490d 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -174,3 +174,9 @@ config MMC_SDRICOH_CS
 	  To compile this driver as a module, choose M here: the
 	  module will be called sdricoh_cs.
 
+config MMC_TMIO
+	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
+	depends on MFD_TMIO
+	help
+	  This provides support for the SD/MMC cell found in TC6393XB,
+	  T7L66XB and also ipaq ASIC3
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index db52eebfb50..c794cc5ce44 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -21,4 +21,5 @@ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
 obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
+obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
 
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index f15e2064305..1f8b5b36222 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -73,9 +73,9 @@
 #include <asm/gpio.h>
 
 #include <asm/mach/mmc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91_mci.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/at91_mci.h>
 
 #define DRIVER_NAME "at91_mci"
 
@@ -621,12 +621,21 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
 				if (cpu_is_at91sam9260 () || cpu_is_at91sam9263())
 					if (host->total_length < 12)
 						host->total_length = 12;
-				host->buffer = dma_alloc_coherent(NULL,
-						host->total_length,
-						&host->physical_address, GFP_KERNEL);
+
+				host->buffer = kmalloc(host->total_length, GFP_KERNEL);
+				if (!host->buffer) {
+					pr_debug("Can't alloc tx buffer\n");
+					cmd->error = -ENOMEM;
+					mmc_request_done(host->mmc, host->request);
+					return;
+				}
 
 				at91_mci_sg_to_dma(host, data);
 
+				host->physical_address = dma_map_single(NULL,
+						host->buffer, host->total_length,
+						DMA_TO_DEVICE);
+
 				pr_debug("Transmitting %d bytes\n", host->total_length);
 
 				at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
@@ -694,7 +703,10 @@ static void at91_mci_completed_command(struct at91mci_host *host, unsigned int s
 	cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
 
 	if (host->buffer) {
-		dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address);
+		dma_unmap_single(NULL,
+				host->physical_address, host->total_length,
+				DMA_TO_DEVICE);
+		kfree(host->buffer);
 		host->buffer = NULL;
 	}
 
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 992b4beb757..917035e16da 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <asm/unaligned.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #include "atmel-mci-regs.h"
 
@@ -195,7 +195,9 @@ static int atmci_regs_show(struct seq_file *s, void *v)
 
 	/* Grab a more or less consistent snapshot */
 	spin_lock_irq(&host->mmc->lock);
+	clk_enable(host->mck);
 	memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
+	clk_disable(host->mck);
 	spin_unlock_irq(&host->mmc->lock);
 
 	seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
@@ -216,6 +218,8 @@ static int atmci_regs_show(struct seq_file *s, void *v)
 	atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
 	atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
 
+	kfree(buf);
+
 	return 0;
 }
 
@@ -237,7 +241,6 @@ static void atmci_init_debugfs(struct atmel_mci *host)
 	struct mmc_host	*mmc;
 	struct dentry	*root;
 	struct dentry	*node;
-	struct resource	*res;
 
 	mmc = host->mmc;
 	root = mmc->debugfs_root;
@@ -251,9 +254,6 @@ static void atmci_init_debugfs(struct atmel_mci *host)
 	if (!node)
 		goto err;
 
-	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-	node->d_inode->i_size = res->end - res->start + 1;
-
 	node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
 	if (!node)
 		goto err;
@@ -1059,6 +1059,10 @@ static int __init atmci_probe(struct platform_device *pdev)
 			host->present = !gpio_get_value(host->detect_pin);
 		}
 	}
+
+	if (!gpio_is_valid(host->detect_pin))
+		mmc->caps |= MMC_CAP_NEEDS_POLL;
+
 	if (gpio_is_valid(host->wp_pin)) {
 		if (gpio_request(host->wp_pin, "mmc_wp")) {
 			dev_dbg(&mmc->class_dev, "no WP pin available\n");
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 99b20917cc0..d3f55615c09 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -61,7 +61,13 @@
 
 /* Hardware definitions */
 #define AU1XMMC_DESCRIPTOR_COUNT 1
-#define AU1XMMC_DESCRIPTOR_SIZE  2048
+
+/* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */
+#ifdef CONFIG_SOC_AU1100
+#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff
+#else	/* Au1200 */
+#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff
+#endif
 
 #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
 		     MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index f61406da65d..2f0fcdb869b 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -42,8 +42,8 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-dma.h>
+#include <mach/mmc.h>
+#include <mach/imx-dma.h>
 
 #include "imxmmc.h"
 
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index dbc26eb6a89..c16028872bb 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -29,14 +29,13 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
 
 #define	OMAP_MMC_REG_CMD	0x00
 #define	OMAP_MMC_REG_ARGL	0x04
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index a8e18fe5307..55093ad132c 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -31,8 +31,8 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/mmc.h>
 
 #include "pxamci.h"
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index be550c26da6..ae16d845d74 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -18,8 +18,8 @@
 
 #include <asm/dma.h>
 
-#include <asm/arch/regs-sdi.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-sdi.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/mci.h>
 
@@ -595,8 +595,9 @@ static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id,
-			      int size, enum s3c2410_dma_buffresult result)
+static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
+				     void *buf_id, int size,
+				     enum s3c2410_dma_buffresult result)
 {
 	struct s3cmci_host *host = buf_id;
 	unsigned long iflags;
@@ -740,8 +741,8 @@ request_done:
 	mmc_request_done(host->mmc, mrq);
 }
 
-
-void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source)
+static void s3cmci_dma_setup(struct s3cmci_host *host,
+			     enum s3c2410_dmasrc source)
 {
 	static enum s3c2410_dmasrc last_source = -1;
 	static int setup_ok;
@@ -1003,8 +1004,9 @@ static void s3cmci_send_request(struct mmc_host *mmc)
 	enable_irq(host->irq);
 }
 
-static int s3cmci_card_present(struct s3cmci_host *host)
+static int s3cmci_card_present(struct mmc_host *mmc)
 {
+	struct s3cmci_host *host = mmc_priv(mmc);
 	struct s3c24xx_mci_pdata *pdata = host->pdata;
 	int ret;
 
@@ -1023,7 +1025,7 @@ static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	host->cmd_is_stop = 0;
 	host->mrq = mrq;
 
-	if (s3cmci_card_present(host) == 0) {
+	if (s3cmci_card_present(mmc) == 0) {
 		dbg(host, dbg_err, "%s: no medium present\n", __func__);
 		host->mrq->cmd->error = -ENOMEDIUM;
 		mmc_request_done(mmc, mrq);
@@ -1138,6 +1140,7 @@ static struct mmc_host_ops s3cmci_ops = {
 	.request	= s3cmci_request,
 	.set_ios	= s3cmci_set_ios,
 	.get_ro		= s3cmci_get_ro,
+	.get_cd		= s3cmci_card_present,
 };
 
 static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
@@ -1206,7 +1209,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 	}
 
 	host->base = ioremap(host->mem->start, RESSIZE(host->mem));
-	if (host->base == 0) {
+	if (!host->base) {
 		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
 		ret = -EINVAL;
 		goto probe_free_mem_region;
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index deb607c52c0..fcb14c2346c 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -143,7 +143,8 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
 		chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR |
 			  SDHCI_QUIRK_32BIT_DMA_SIZE |
 			  SDHCI_QUIRK_32BIT_ADMA_SIZE |
-			  SDHCI_QUIRK_RESET_AFTER_REQUEST;
+			  SDHCI_QUIRK_RESET_AFTER_REQUEST |
+			  SDHCI_QUIRK_BROKEN_SMALL_PIO;
 	}
 
 	/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5f95e10229b..e3a8133560a 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -278,6 +278,15 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
 	else
 		mask = SDHCI_SPACE_AVAILABLE;
 
+	/*
+	 * Some controllers (JMicron JMB38x) mess up the buffer bits
+	 * for transfers < 4 bytes. As long as it is just one block,
+	 * we can ignore the bits.
+	 */
+	if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
+		(host->data->blocks == 1))
+		mask = ~0;
+
 	while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
 		if (host->data->flags & MMC_DATA_READ)
 			sdhci_read_block_pio(host);
@@ -439,7 +448,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 
 	host->adma_addr = dma_map_single(mmc_dev(host->mmc),
 		host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
-	if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
+	if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
 		goto unmap_entries;
 	BUG_ON(host->adma_addr & 0x3);
 
@@ -645,7 +654,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 				 * us an invalid request.
 				 */
 				WARN_ON(1);
-				host->flags &= ~SDHCI_USE_DMA;
+				host->flags &= ~SDHCI_REQ_USE_DMA;
 			} else {
 				writel(host->adma_addr,
 					host->ioaddr + SDHCI_ADMA_ADDRESS);
@@ -664,7 +673,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 				 * us an invalid request.
 				 */
 				WARN_ON(1);
-				host->flags &= ~SDHCI_USE_DMA;
+				host->flags &= ~SDHCI_REQ_USE_DMA;
 			} else {
 				WARN_ON(sg_cnt != 1);
 				writel(sg_dma_address(data->sg),
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index e354faee5df..197d4a05f4a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -206,6 +206,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
 /* Controller provides an incorrect timeout value for transfers */
 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
+/* Controller has an issue with buffer bits for small transfers */
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index f99e9f72162..1df44d966bd 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -29,7 +29,6 @@
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/scatterlist.h>
-#include <linux/version.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
new file mode 100644
index 00000000000..95430b81ec1
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -0,0 +1,691 @@
+/*
+ *  linux/drivers/mmc/tmio_mmc.c
+ *
+ *  Copyright (C) 2004 Ian Molton
+ *  Copyright (C) 2007 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the MMC / SD / SDIO cell found in:
+ *
+ * TC6393XB TC6391XB TC6387XB T7L66XB
+ *
+ * This driver draws mainly on scattered spec sheets, Reverse engineering
+ * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
+ * support). (Further 4 bit support from a later datasheet).
+ *
+ * TODO:
+ *   Investigate using a workqueue for PIO transfers
+ *   Eliminate FIXMEs
+ *   SDIO support
+ *   Better Power management
+ *   Handle MMC errors better
+ *   double buffer support
+ *
+ */
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+
+#include "tmio_mmc.h"
+
+/*
+ * Fixme - documentation conflicts on what the clock values are for the
+ * various dividers.
+ * One document I have says that its a divisor of a 24MHz clock, another 33.
+ * This probably depends on HCLK for a given platform, so we may need to
+ * require HCLK be passed to us from the MFD core.
+ *
+ */
+
+static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
+{
+	void __iomem *cnf = host->cnf;
+	void __iomem *ctl = host->ctl;
+	u32 clk = 0, clock;
+
+	if (new_clock) {
+		for (clock = 46875, clk = 0x100; new_clock >= (clock<<1); ) {
+			clock <<= 1;
+			clk >>= 1;
+		}
+		if (clk & 0x1)
+			clk = 0x20000;
+
+		clk >>= 2;
+		tmio_iowrite8((clk & 0x8000) ? 0 : 1, cnf + CNF_SD_CLK_MODE);
+		clk |= 0x100;
+	}
+
+	tmio_iowrite16(clk, ctl + CTL_SD_CARD_CLK_CTL);
+}
+
+static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+
+	tmio_iowrite16(0x0000, ctl + CTL_CLK_AND_WAIT_CTL);
+	msleep(10);
+	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) & ~0x0100,
+	       ctl + CTL_SD_CARD_CLK_CTL);
+	msleep(10);
+}
+
+static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+
+	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) | 0x0100,
+	       ctl + CTL_SD_CARD_CLK_CTL);
+	msleep(10);
+	tmio_iowrite16(0x0100, ctl + CTL_CLK_AND_WAIT_CTL);
+	msleep(10);
+}
+
+static void reset(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+
+	/* FIXME - should we set stop clock reg here */
+	tmio_iowrite16(0x0000, ctl + CTL_RESET_SD);
+	tmio_iowrite16(0x0000, ctl + CTL_RESET_SDIO);
+	msleep(10);
+	tmio_iowrite16(0x0001, ctl + CTL_RESET_SD);
+	tmio_iowrite16(0x0001, ctl + CTL_RESET_SDIO);
+	msleep(10);
+}
+
+static void
+tmio_mmc_finish_request(struct tmio_mmc_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+
+	host->mrq = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+
+	mmc_request_done(host->mmc, mrq);
+}
+
+/* These are the bitmasks the tmio chip requires to implement the MMC response
+ * types. Note that R1 and R6 are the same in this scheme. */
+#define APP_CMD        0x0040
+#define RESP_NONE      0x0300
+#define RESP_R1        0x0400
+#define RESP_R1B       0x0500
+#define RESP_R2        0x0600
+#define RESP_R3        0x0700
+#define DATA_PRESENT   0x0800
+#define TRANSFER_READ  0x1000
+#define TRANSFER_MULTI 0x2000
+#define SECURITY_CMD   0x4000
+
+static int
+tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
+{
+	void __iomem *ctl = host->ctl;
+	struct mmc_data *data = host->data;
+	int c = cmd->opcode;
+
+	/* Command 12 is handled by hardware */
+	if (cmd->opcode == 12 && !cmd->arg) {
+		tmio_iowrite16(0x001, ctl + CTL_STOP_INTERNAL_ACTION);
+		return 0;
+	}
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE: c |= RESP_NONE; break;
+	case MMC_RSP_R1:   c |= RESP_R1;   break;
+	case MMC_RSP_R1B:  c |= RESP_R1B;  break;
+	case MMC_RSP_R2:   c |= RESP_R2;   break;
+	case MMC_RSP_R3:   c |= RESP_R3;   break;
+	default:
+		pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
+		return -EINVAL;
+	}
+
+	host->cmd = cmd;
+
+/* FIXME - this seems to be ok comented out but the spec suggest this bit should
+ *         be set when issuing app commands.
+ *	if(cmd->flags & MMC_FLAG_ACMD)
+ *		c |= APP_CMD;
+ */
+	if (data) {
+		c |= DATA_PRESENT;
+		if (data->blocks > 1) {
+			tmio_iowrite16(0x100, ctl + CTL_STOP_INTERNAL_ACTION);
+			c |= TRANSFER_MULTI;
+		}
+		if (data->flags & MMC_DATA_READ)
+			c |= TRANSFER_READ;
+	}
+
+	enable_mmc_irqs(ctl, TMIO_MASK_CMD);
+
+	/* Fire off the command */
+	tmio_iowrite32(cmd->arg, ctl + CTL_ARG_REG);
+	tmio_iowrite16(c, ctl + CTL_SD_CMD);
+
+	return 0;
+}
+
+/* This chip always returns (at least?) as much data as you ask for.
+ * I'm unsure what happens if you ask for less than a block. This should be
+ * looked into to ensure that a funny length read doesnt hose the controller.
+ *
+ */
+static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+	struct mmc_data *data = host->data;
+	unsigned short *buf;
+	unsigned int count;
+	unsigned long flags;
+
+	if (!data) {
+		pr_debug("Spurious PIO IRQ\n");
+		return;
+	}
+
+	buf = (unsigned short *)(tmio_mmc_kmap_atomic(host, &flags) +
+	      host->sg_off);
+
+	count = host->sg_ptr->length - host->sg_off;
+	if (count > data->blksz)
+		count = data->blksz;
+
+	pr_debug("count: %08x offset: %08x flags %08x\n",
+	    count, host->sg_off, data->flags);
+
+	/* Transfer the data */
+	if (data->flags & MMC_DATA_READ)
+		tmio_ioread16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+	else
+		tmio_iowrite16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+
+	host->sg_off += count;
+
+	tmio_mmc_kunmap_atomic(host, &flags);
+
+	if (host->sg_off == host->sg_ptr->length)
+		tmio_mmc_next_sg(host);
+
+	return;
+}
+
+static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+	struct mmc_data *data = host->data;
+	struct mmc_command *stop = data->stop;
+
+	host->data = NULL;
+
+	if (!data) {
+		pr_debug("Spurious data end IRQ\n");
+		return;
+	}
+
+	/* FIXME - return correct transfer count on errors */
+	if (!data->error)
+		data->bytes_xfered = data->blocks * data->blksz;
+	else
+		data->bytes_xfered = 0;
+
+	pr_debug("Completed data request\n");
+
+	/*FIXME - other drivers allow an optional stop command of any given type
+	 *        which we dont do, as the chip can auto generate them.
+	 *        Perhaps we can be smarter about when to use auto CMD12 and
+	 *        only issue the auto request when we know this is the desired
+	 *        stop command, allowing fallback to the stop command the
+	 *        upper layers expect. For now, we do what works.
+	 */
+
+	if (data->flags & MMC_DATA_READ)
+		disable_mmc_irqs(ctl, TMIO_MASK_READOP);
+	else
+		disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+
+	if (stop) {
+		if (stop->opcode == 12 && !stop->arg)
+			tmio_iowrite16(0x000, ctl + CTL_STOP_INTERNAL_ACTION);
+		else
+			BUG();
+	}
+
+	tmio_mmc_finish_request(host);
+}
+
+static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
+	unsigned int stat)
+{
+	void __iomem *ctl = host->ctl, *addr;
+	struct mmc_command *cmd = host->cmd;
+	int i;
+
+	if (!host->cmd) {
+		pr_debug("Spurious CMD irq\n");
+		return;
+	}
+
+	host->cmd = NULL;
+
+	/* This controller is sicker than the PXA one. Not only do we need to
+	 * drop the top 8 bits of the first response word, we also need to
+	 * modify the order of the response for short response command types.
+	 */
+
+	for (i = 3, addr = ctl + CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+		cmd->resp[i] = tmio_ioread32(addr);
+
+	if (cmd->flags &  MMC_RSP_136) {
+		cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
+		cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
+		cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
+		cmd->resp[3] <<= 8;
+	} else if (cmd->flags & MMC_RSP_R3) {
+		cmd->resp[0] = cmd->resp[3];
+	}
+
+	if (stat & TMIO_STAT_CMDTIMEOUT)
+		cmd->error = -ETIMEDOUT;
+	else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
+		cmd->error = -EILSEQ;
+
+	/* If there is data to handle we enable data IRQs here, and
+	 * we will ultimatley finish the request in the data_end handler.
+	 * If theres no data or we encountered an error, finish now.
+	 */
+	if (host->data && !cmd->error) {
+		if (host->data->flags & MMC_DATA_READ)
+			enable_mmc_irqs(ctl, TMIO_MASK_READOP);
+		else
+			enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+	} else {
+		tmio_mmc_finish_request(host);
+	}
+
+	return;
+}
+
+
+static irqreturn_t tmio_mmc_irq(int irq, void *devid)
+{
+	struct tmio_mmc_host *host = devid;
+	void __iomem *ctl = host->ctl;
+	unsigned int ireg, irq_mask, status;
+
+	pr_debug("MMC IRQ begin\n");
+
+	status = tmio_ioread32(ctl + CTL_STATUS);
+	irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+	ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+
+	pr_debug_status(status);
+	pr_debug_status(ireg);
+
+	if (!ireg) {
+		disable_mmc_irqs(ctl, status & ~irq_mask);
+
+		pr_debug("tmio_mmc: Spurious irq, disabling! "
+			"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
+		pr_debug_status(status);
+
+		goto out;
+	}
+
+	while (ireg) {
+		/* Card insert / remove attempts */
+		if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
+			ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT |
+				TMIO_STAT_CARD_REMOVE);
+			mmc_detect_change(host->mmc, 0);
+		}
+
+		/* CRC and other errors */
+/*		if (ireg & TMIO_STAT_ERR_IRQ)
+ *			handled |= tmio_error_irq(host, irq, stat);
+ */
+
+		/* Command completion */
+		if (ireg & TMIO_MASK_CMD) {
+			ack_mmc_irqs(ctl, TMIO_MASK_CMD);
+			tmio_mmc_cmd_irq(host, status);
+		}
+
+		/* Data transfer */
+		if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
+			ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+			tmio_mmc_pio_irq(host);
+		}
+
+		/* Data transfer completion */
+		if (ireg & TMIO_STAT_DATAEND) {
+			ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
+			tmio_mmc_data_irq(host);
+		}
+
+		/* Check status - keep going until we've handled it all */
+		status = tmio_ioread32(ctl + CTL_STATUS);
+		irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+		ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+
+		pr_debug("Status at end of loop: %08x\n", status);
+		pr_debug_status(status);
+	}
+	pr_debug("MMC IRQ end\n");
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int tmio_mmc_start_data(struct tmio_mmc_host *host,
+	struct mmc_data *data)
+{
+	void __iomem *ctl = host->ctl;
+
+	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
+	    data->blksz, data->blocks);
+
+	/* Hardware cannot perform 1 and 2 byte requests in 4 bit mode */
+	if (data->blksz < 4 && host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
+		printk(KERN_ERR "%s: %d byte block unsupported in 4 bit mode\n",
+			mmc_hostname(host->mmc), data->blksz);
+		return -EINVAL;
+	}
+
+	tmio_mmc_init_sg(host, data);
+	host->data = data;
+
+	/* Set transfer length / blocksize */
+	tmio_iowrite16(data->blksz,  ctl + CTL_SD_XFER_LEN);
+	tmio_iowrite16(data->blocks, ctl + CTL_XFER_BLK_COUNT);
+
+	return 0;
+}
+
+/* Process requests from the MMC layer */
+static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	int ret;
+
+	if (host->mrq)
+		pr_debug("request not null\n");
+
+	host->mrq = mrq;
+
+	if (mrq->data) {
+		ret = tmio_mmc_start_data(host, mrq->data);
+		if (ret)
+			goto fail;
+	}
+
+	ret = tmio_mmc_start_command(host, mrq->cmd);
+
+	if (!ret)
+		return;
+
+fail:
+	mrq->cmd->error = ret;
+	mmc_request_done(mmc, mrq);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot
+ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
+ * MMC wont run that fast, it has to be clocked at 12MHz which is the next
+ * slowest setting.
+ */
+static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	void __iomem *cnf = host->cnf;
+	void __iomem *ctl = host->ctl;
+
+	if (ios->clock)
+		tmio_mmc_set_clock(host, ios->clock);
+
+	/* Power sequence - OFF -> ON -> UP */
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF: /* power down SD bus */
+		tmio_iowrite8(0x00, cnf + CNF_PWR_CTL_2);
+		tmio_mmc_clk_stop(host);
+		break;
+	case MMC_POWER_ON: /* power up SD bus */
+
+		tmio_iowrite8(0x02, cnf + CNF_PWR_CTL_2);
+		break;
+	case MMC_POWER_UP: /* start bus clock */
+		tmio_mmc_clk_start(host);
+		break;
+	}
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_1:
+		tmio_iowrite16(0x80e0, ctl + CTL_SD_MEM_CARD_OPT);
+	break;
+	case MMC_BUS_WIDTH_4:
+		tmio_iowrite16(0x00e0, ctl + CTL_SD_MEM_CARD_OPT);
+	break;
+	}
+
+	/* Let things settle. delay taken from winCE driver */
+	udelay(140);
+}
+
+static int tmio_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	void __iomem *ctl = host->ctl;
+
+	return (tmio_ioread16(ctl + CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+}
+
+static struct mmc_host_ops tmio_mmc_ops = {
+	.request	= tmio_mmc_request,
+	.set_ios	= tmio_mmc_set_ios,
+	.get_ro         = tmio_mmc_get_ro,
+};
+
+#ifdef CONFIG_PM
+static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	int ret;
+
+	ret = mmc_suspend_host(mmc, state);
+
+	/* Tell MFD core it can disable us now.*/
+	if (!ret && cell->disable)
+		cell->disable(dev);
+
+	return ret;
+}
+
+static int tmio_mmc_resume(struct platform_device *dev)
+{
+	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	void __iomem *cnf = host->cnf;
+	int ret = 0;
+
+	/* Enable the MMC/SD Control registers */
+	tmio_iowrite16(SDCREN, cnf + CNF_CMD);
+	tmio_iowrite32(dev->resource[0].start & 0xfffe, cnf + CNF_CTL_BASE);
+
+	/* Tell the MFD core we are ready to be enabled */
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			goto out;
+	}
+
+	mmc_resume_host(mmc);
+
+out:
+	return ret;
+}
+#else
+#define tmio_mmc_suspend NULL
+#define tmio_mmc_resume NULL
+#endif
+
+static int __devinit tmio_mmc_probe(struct platform_device *dev)
+{
+	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct resource *res_ctl, *res_cnf;
+	struct tmio_mmc_host *host;
+	struct mmc_host *mmc;
+	int ret = -ENOMEM;
+
+	if (dev->num_resources != 3)
+		goto out;
+
+	res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	if (!res_ctl || !res_cnf) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
+	if (!mmc)
+		goto out;
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	platform_set_drvdata(dev, mmc);
+
+	host->ctl = ioremap(res_ctl->start, res_ctl->end - res_ctl->start);
+	if (!host->ctl)
+		goto host_free;
+
+	host->cnf = ioremap(res_cnf->start, res_cnf->end - res_cnf->start);
+	if (!host->cnf)
+		goto unmap_ctl;
+
+	mmc->ops = &tmio_mmc_ops;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+	mmc->f_min = 46875; /* 24000000 / 512 */
+	mmc->f_max = 24000000;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	/* Enable the MMC/SD Control registers */
+	tmio_iowrite16(SDCREN, host->cnf + CNF_CMD);
+	tmio_iowrite32(dev->resource[0].start & 0xfffe,
+		host->cnf + CNF_CTL_BASE);
+
+	/* Tell the MFD core we are ready to be enabled */
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			goto unmap_cnf;
+	}
+
+	/* Disable SD power during suspend */
+	tmio_iowrite8(0x01, host->cnf + CNF_PWR_CTL_3);
+
+	/* The below is required but why? FIXME */
+	tmio_iowrite8(0x1f, host->cnf + CNF_STOP_CLK_CTL);
+
+	/* Power down SD bus*/
+	tmio_iowrite8(0x0,  host->cnf + CNF_PWR_CTL_2);
+
+	tmio_mmc_clk_stop(host);
+	reset(host);
+
+	ret = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		host->irq = ret;
+	else
+		goto unmap_cnf;
+
+	disable_mmc_irqs(host->ctl, TMIO_MASK_ALL);
+
+	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc",
+		host);
+	if (ret)
+		goto unmap_cnf;
+
+	set_irq_type(host->irq, IRQ_TYPE_EDGE_FALLING);
+
+	mmc_add_host(mmc);
+
+	printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
+	       (unsigned long)host->ctl, host->irq);
+
+	/* Unmask the IRQs we want to know about */
+	enable_mmc_irqs(host->ctl,  TMIO_MASK_IRQ);
+
+	return 0;
+
+unmap_cnf:
+	iounmap(host->cnf);
+unmap_ctl:
+	iounmap(host->ctl);
+host_free:
+	mmc_free_host(mmc);
+out:
+	return ret;
+}
+
+static int __devexit tmio_mmc_remove(struct platform_device *dev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	if (mmc) {
+		struct tmio_mmc_host *host = mmc_priv(mmc);
+		mmc_remove_host(mmc);
+		mmc_free_host(mmc);
+		free_irq(host->irq, host);
+		iounmap(host->ctl);
+		iounmap(host->cnf);
+	}
+
+	return 0;
+}
+
+/* ------------------- device registration ----------------------- */
+
+static struct platform_driver tmio_mmc_driver = {
+	.driver = {
+		.name = "tmio-mmc",
+		.owner = THIS_MODULE,
+	},
+	.probe = tmio_mmc_probe,
+	.remove = __devexit_p(tmio_mmc_remove),
+	.suspend = tmio_mmc_suspend,
+	.resume = tmio_mmc_resume,
+};
+
+
+static int __init tmio_mmc_init(void)
+{
+	return platform_driver_register(&tmio_mmc_driver);
+}
+
+static void __exit tmio_mmc_exit(void)
+{
+	platform_driver_unregister(&tmio_mmc_driver);
+}
+
+module_init(tmio_mmc_init);
+module_exit(tmio_mmc_exit);
+
+MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tmio-mmc");
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
new file mode 100644
index 00000000000..ba2b4240a86
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -0,0 +1,194 @@
+/* Definitons for use with the tmio_mmc.c
+ *
+ * (c) 2004 Ian Molton <spyro@f2s.com>
+ * (c) 2007 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#define CNF_CMD     0x04
+#define CNF_CTL_BASE   0x10
+#define CNF_INT_PIN  0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
+#define CTL_SD_CMD 0x00
+#define CTL_ARG_REG 0x04
+#define CTL_STOP_INTERNAL_ACTION 0x08
+#define CTL_XFER_BLK_COUNT 0xa
+#define CTL_RESPONSE 0x0c
+#define CTL_STATUS 0x1c
+#define CTL_IRQ_MASK 0x20
+#define CTL_SD_CARD_CLK_CTL 0x24
+#define CTL_SD_XFER_LEN 0x26
+#define CTL_SD_MEM_CARD_OPT 0x28
+#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
+#define CTL_SD_DATA_PORT 0x30
+#define CTL_TRANSACTION_CTL 0x34
+#define CTL_RESET_SD 0xe0
+#define CTL_SDIO_REGS 0x100
+#define CTL_CLK_AND_WAIT_CTL 0x138
+#define CTL_RESET_SDIO 0x1e0
+
+/* Definitions for values the CTRL_STATUS register can take. */
+#define TMIO_STAT_CMDRESPEND    0x00000001
+#define TMIO_STAT_DATAEND       0x00000004
+#define TMIO_STAT_CARD_REMOVE   0x00000008
+#define TMIO_STAT_CARD_INSERT   0x00000010
+#define TMIO_STAT_SIGSTATE      0x00000020
+#define TMIO_STAT_WRPROTECT     0x00000080
+#define TMIO_STAT_CARD_REMOVE_A 0x00000100
+#define TMIO_STAT_CARD_INSERT_A 0x00000200
+#define TMIO_STAT_SIGSTATE_A    0x00000400
+#define TMIO_STAT_CMD_IDX_ERR   0x00010000
+#define TMIO_STAT_CRCFAIL       0x00020000
+#define TMIO_STAT_STOPBIT_ERR   0x00040000
+#define TMIO_STAT_DATATIMEOUT   0x00080000
+#define TMIO_STAT_RXOVERFLOW    0x00100000
+#define TMIO_STAT_TXUNDERRUN    0x00200000
+#define TMIO_STAT_CMDTIMEOUT    0x00400000
+#define TMIO_STAT_RXRDY         0x01000000
+#define TMIO_STAT_TXRQ          0x02000000
+#define TMIO_STAT_ILL_FUNC      0x20000000
+#define TMIO_STAT_CMD_BUSY      0x40000000
+#define TMIO_STAT_ILL_ACCESS    0x80000000
+
+/* Define some IRQ masks */
+/* This is the mask used at reset by the chip */
+#define TMIO_MASK_ALL           0x837f031d
+#define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND | \
+		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND | \
+		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_CMD     (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \
+		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
+
+#define enable_mmc_irqs(ctl, i) \
+	do { \
+		u32 mask;\
+		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask &= ~((i) & TMIO_MASK_IRQ); \
+		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+	} while (0)
+
+#define disable_mmc_irqs(ctl, i) \
+	do { \
+		u32 mask;\
+		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask |= ((i) & TMIO_MASK_IRQ); \
+		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+	} while (0)
+
+#define ack_mmc_irqs(ctl, i) \
+	do { \
+		u32 mask;\
+		mask  = tmio_ioread32((ctl) + CTL_STATUS); \
+		mask &= ~((i) & TMIO_MASK_IRQ); \
+		tmio_iowrite32(mask, (ctl) + CTL_STATUS); \
+	} while (0)
+
+
+struct tmio_mmc_host {
+	void __iomem *cnf;
+	void __iomem *ctl;
+	struct mmc_command      *cmd;
+	struct mmc_request      *mrq;
+	struct mmc_data         *data;
+	struct mmc_host         *mmc;
+	int                     irq;
+
+	/* pio related stuff */
+	struct scatterlist      *sg_ptr;
+	unsigned int            sg_len;
+	unsigned int            sg_off;
+};
+
+#include <linux/scatterlist.h>
+#include <linux/blkdev.h>
+
+static inline void tmio_mmc_init_sg(struct tmio_mmc_host *host,
+	struct mmc_data *data)
+{
+	host->sg_len = data->sg_len;
+	host->sg_ptr = data->sg;
+	host->sg_off = 0;
+}
+
+static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host)
+{
+	host->sg_ptr = sg_next(host->sg_ptr);
+	host->sg_off = 0;
+	return --host->sg_len;
+}
+
+static inline char *tmio_mmc_kmap_atomic(struct tmio_mmc_host *host,
+	unsigned long *flags)
+{
+	struct scatterlist *sg = host->sg_ptr;
+
+	local_irq_save(*flags);
+	return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
+}
+
+static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host,
+	unsigned long *flags)
+{
+	kunmap_atomic(sg_page(host->sg_ptr), KM_BIO_SRC_IRQ);
+	local_irq_restore(*flags);
+}
+
+#ifdef CONFIG_MMC_DEBUG
+
+#define STATUS_TO_TEXT(a) \
+	do { \
+		if (status & TMIO_STAT_##a) \
+			printk(#a); \
+	} while (0)
+
+void pr_debug_status(u32 status)
+{
+	printk(KERN_DEBUG "status: %08x = ", status);
+	STATUS_TO_TEXT(CARD_REMOVE);
+	STATUS_TO_TEXT(CARD_INSERT);
+	STATUS_TO_TEXT(SIGSTATE);
+	STATUS_TO_TEXT(WRPROTECT);
+	STATUS_TO_TEXT(CARD_REMOVE_A);
+	STATUS_TO_TEXT(CARD_INSERT_A);
+	STATUS_TO_TEXT(SIGSTATE_A);
+	STATUS_TO_TEXT(CMD_IDX_ERR);
+	STATUS_TO_TEXT(STOPBIT_ERR);
+	STATUS_TO_TEXT(ILL_FUNC);
+	STATUS_TO_TEXT(CMD_BUSY);
+	STATUS_TO_TEXT(CMDRESPEND);
+	STATUS_TO_TEXT(DATAEND);
+	STATUS_TO_TEXT(CRCFAIL);
+	STATUS_TO_TEXT(DATATIMEOUT);
+	STATUS_TO_TEXT(CMDTIMEOUT);
+	STATUS_TO_TEXT(RXOVERFLOW);
+	STATUS_TO_TEXT(TXUNDERRUN);
+	STATUS_TO_TEXT(RXRDY);
+	STATUS_TO_TEXT(TXRQ);
+	STATUS_TO_TEXT(ILL_ACCESS);
+	printk("\n");
+}
+
+#else
+#define pr_debug_status(s)  do { } while (0)
+#endif
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index dbba5abf0db..f84ab618214 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -41,7 +41,7 @@
 
 
 /* AMD */
-#define AM29DL800BB	0x22C8
+#define AM29DL800BB	0x22CB
 #define AM29DL800BT	0x224A
 
 #define AM29F800BB	0x2258
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 54e36bfc2c3..8bd0dea6885 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -15,6 +15,8 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/err.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
@@ -487,9 +489,8 @@ add_dataflash(struct spi_device *spi, char *name,
 	device->write = dataflash_write;
 	device->priv = priv;
 
-	dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, "
-		"erasesize %d bytes\n", name, device->size/1024,
-		 pagesize, pagesize * 8);	/* 8 pages = 1 block */
+	dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes\n",
+			name, DIV_ROUND_UP(device->size, 1024), pagesize);
 	dev_set_drvdata(&spi->dev, priv);
 
 	if (mtd_has_partitions()) {
@@ -518,65 +519,57 @@ add_dataflash(struct spi_device *spi, char *name,
 	return add_mtd_device(device) == 1 ? -ENODEV : 0;
 }
 
-/*
- * Detect and initialize DataFlash device:
- *
- *   Device      Density         ID code          #Pages PageSize  Offset
- *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
- *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
- *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
- *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
- *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
- *   AT45DB0321B 32Mbit  (4M)    xx1101xx (0x34)   8192    528     10
- *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
- *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
- */
-
 struct flash_info {
 	char		*name;
 
-	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
-	 * a high byte of zero plus three data bytes: the manufacturer id,
-	 * then a two byte device id.
+	/* JEDEC id has a high byte of zero plus three data bytes:
+	 * the manufacturer id, then a two byte device id.
 	 */
 	uint32_t	jedec_id;
 
-	/* The size listed here is what works with OPCODE_SE, which isn't
-	 * necessarily called a "sector" by the vendor.
-	 */
+	/* The size listed here is what works with OP_ERASE_PAGE. */
 	unsigned	nr_pages;
 	uint16_t	pagesize;
 	uint16_t	pageoffset;
 
 	uint16_t	flags;
-#define	SUP_POW2PS	0x02
-#define	IS_POW2PS	0x01
+#define SUP_POW2PS	0x0002		/* supports 2^N byte pages */
+#define IS_POW2PS	0x0001		/* uses 2^N byte pages */
 };
 
 static struct flash_info __devinitdata dataflash_data [] = {
 
-	{ "at45db011d",  0x1f2200, 512, 264, 9, SUP_POW2PS},
+	/*
+	 * NOTE:  chips with SUP_POW2PS (rev D and up) need two entries,
+	 * one with IS_POW2PS and the other without.  The entry with the
+	 * non-2^N byte page size can't name exact chip revisions without
+	 * losing backwards compatibility for cmdlinepart.
+	 *
+	 * These newer chips also support 128-byte security registers (with
+	 * 64 bytes one-time-programmable) and software write-protection.
+	 */
+	{ "AT45DB011B",  0x1f2200, 512, 264, 9, SUP_POW2PS},
 	{ "at45db011d",  0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db021d",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
+	{ "AT45DB021B",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
 	{ "at45db021d",  0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db041d",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
+	{ "AT45DB041x",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
 	{ "at45db041d",  0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db081d",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
+	{ "AT45DB081B",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
 	{ "at45db081d",  0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db161d",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
+	{ "AT45DB161x",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
 	{ "at45db161d",  0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db321c",  0x1f2700, 8192, 528, 10, },
+	{ "AT45DB321x",  0x1f2700, 8192, 528, 10, 0},		/* rev C */
 
-	{ "at45db321d",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
+	{ "AT45DB321x",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
 	{ "at45db321d",  0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db641d",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
-	{ "at45db641d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+	{ "AT45DB642x",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
+	{ "at45db642d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
 };
 
 static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
@@ -588,17 +581,23 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 	struct flash_info	*info;
 	int status;
 
-
 	/* JEDEC also defines an optional "extended device information"
 	 * string for after vendor-specific data, after the three bytes
 	 * we use here.  Supporting some chips might require using it.
+	 *
+	 * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
+	 * That's not an error; only rev C and newer chips handle it, and
+	 * only Atmel sells these chips.
 	 */
 	tmp = spi_write_then_read(spi, &code, 1, id, 3);
 	if (tmp < 0) {
 		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
 			spi->dev.bus_id, tmp);
-		return NULL;
+		return ERR_PTR(tmp);
 	}
+	if (id[0] != 0x1f)
+		return NULL;
+
 	jedec = id[0];
 	jedec = jedec << 8;
 	jedec |= id[1];
@@ -609,19 +608,53 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 			tmp < ARRAY_SIZE(dataflash_data);
 			tmp++, info++) {
 		if (info->jedec_id == jedec) {
+			DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+				dev_name(&spi->dev),
+				(info->flags & SUP_POW2PS)
+					? ", binary pagesize" : ""
+				);
 			if (info->flags & SUP_POW2PS) {
 				status = dataflash_status(spi);
-				if (status & 0x1)
-					/* return power of 2 pagesize */
-					return ++info;
-				else
-					return info;
+				if (status < 0) {
+					DEBUG(MTD_DEBUG_LEVEL1,
+						"%s: status error %d\n",
+						dev_name(&spi->dev), status);
+					return ERR_PTR(status);
+				}
+				if (status & 0x1) {
+					if (info->flags & IS_POW2PS)
+						return info;
+				} else {
+					if (!(info->flags & IS_POW2PS))
+						return info;
+				}
 			}
 		}
 	}
-	return NULL;
+
+	/*
+	 * Treat other chips as errors ... we won't know the right page
+	 * size (it might be binary) even when we can tell which density
+	 * class is involved (legacy chip id scheme).
+	 */
+	dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec);
+	return ERR_PTR(-ENODEV);
 }
 
+/*
+ * Detect and initialize DataFlash device, using JEDEC IDs on newer chips
+ * or else the ID code embedded in the status bits:
+ *
+ *   Device      Density         ID code          #Pages PageSize  Offset
+ *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
+ *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
+ *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
+ *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
+ *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
+ *   AT45DB0321B 32Mbit  (4M)    xx1101xx (0x34)   8192    528     10
+ *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
+ *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
+ */
 static int __devinit dataflash_probe(struct spi_device *spi)
 {
 	int status;
@@ -632,14 +665,17 @@ static int __devinit dataflash_probe(struct spi_device *spi)
 	 * If it succeeds we know we have either a C or D part.
 	 * D will support power of 2 pagesize option.
 	 */
-
 	info = jedec_probe(spi);
-
+	if (IS_ERR(info))
+		return PTR_ERR(info);
 	if (info != NULL)
 		return add_dataflash(spi, info->name, info->nr_pages,
 				 info->pagesize, info->pageoffset);
 
-
+	/*
+	 * Older chips support only legacy commands, identifing
+	 * capacity using bits in the status byte.
+	 */
 	status = dataflash_status(spi);
 	if (status <= 0 || status == 0xff) {
 		DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
@@ -661,13 +697,13 @@ static int __devinit dataflash_probe(struct spi_device *spi)
 		status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9);
 		break;
 	case 0x1c:	/* 0 1 1 1 x x */
-		status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9);
+		status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9);
 		break;
 	case 0x24:	/* 1 0 0 1 x x */
 		status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9);
 		break;
 	case 0x2c:	/* 1 0 1 1 x x */
-		status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10);
+		status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10);
 		break;
 	case 0x34:	/* 1 1 0 1 x x */
 		status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10);
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 948b86f35ef..d1eec7d3243 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -6,7 +6,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
index cf32267263d..53664188fc4 100644
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -25,8 +25,8 @@
 #include <linux/init.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/hardware.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/hardware.h>
+#include <mach/autcpu12.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index cb507da0a87..e5059aa3c72 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -9,7 +9,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index 6464d487eb1..60e68bde0fe 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -25,7 +25,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/concat.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index effaf7cdefa..1a6feb4474d 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -9,7 +9,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c
index aa64a475278..bbbcdd4c8d1 100644
--- a/drivers/mtd/maps/esb2rom.c
+++ b/drivers/mtd/maps/esb2rom.c
@@ -12,7 +12,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index ef891547446..35fef655ccc 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -16,7 +16,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index ee361aaadb1..7100ee3c7b0 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -37,7 +37,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/mach/flash.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
index a806119797e..ed58f6a77bd 100644
--- a/drivers/mtd/maps/ipaq-flash.c
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -24,8 +24,8 @@
 #include <linux/mtd/concat.h>
 #endif
 
-#include <asm/hardware.h>
-#include <asm/arch-sa1100/h3600.h>
+#include <mach/hardware.h>
+#include <mach/h3600.h>
 #include <asm/io.h>
 
 
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index c2264792a20..dcdb1f17577 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -30,7 +30,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/flash.h>
 
 #include <linux/reboot.h>
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index 68eec6c6c51..05f276af15d 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -43,9 +43,9 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL };
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 82113295c26..771139c5bf8 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/cacheflush.h>
 
 #include <asm/mach/flash.h>
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index e177a43dfff..7df6bbf0e4d 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -18,7 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/concat.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <asm/mach/flash.h>
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index d2f331876e4..e00d424e657 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -410,16 +410,20 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
 	case MEMGETREGIONINFO:
 	{
-		struct region_info_user ur;
+		uint32_t ur_idx;
+		struct mtd_erase_region_info *kr;
+		struct region_info_user *ur = (struct region_info_user *) argp;
 
-		if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
+		if (get_user(ur_idx, &(ur->regionindex)))
 			return -EFAULT;
 
-		if (ur.regionindex >= mtd->numeraseregions)
-			return -EINVAL;
-		if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
-				sizeof(struct mtd_erase_region_info)))
+		kr = &(mtd->eraseregions[ur_idx]);
+
+		if (put_user(kr->offset, &(ur->offset))
+		    || put_user(kr->erasesize, &(ur->erasesize))
+		    || put_user(kr->numblocks, &(ur->numblocks)))
 			return -EFAULT;
+
 		break;
 	}
 
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 28cc6787a80..00d46e137b2 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -125,8 +125,11 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 	       int (*fill_super)(struct super_block *, void *, int),
 	       struct vfsmount *mnt)
 {
-	struct nameidata nd;
-	int mtdnr, ret;
+#ifdef CONFIG_BLOCK
+	struct block_device *bdev;
+	int ret, major;
+#endif
+	int mtdnr;
 
 	if (!dev_name)
 		return -EINVAL;
@@ -178,45 +181,38 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 		}
 	}
 
+#ifdef CONFIG_BLOCK
 	/* try the old way - the hack where we allowed users to mount
 	 * /dev/mtdblock$(n) but didn't actually _use_ the blockdev
 	 */
-	ret = path_lookup(dev_name, LOOKUP_FOLLOW, &nd);
-
-	DEBUG(1, "MTDSB: path_lookup() returned %d, inode %p\n",
-	      ret, nd.path.dentry ? nd.path.dentry->d_inode : NULL);
-
-	if (ret)
+	bdev = lookup_bdev(dev_name);
+	if (IS_ERR(bdev)) {
+		ret = PTR_ERR(bdev);
+		DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret);
 		return ret;
+	}
+	DEBUG(1, "MTDSB: lookup_bdev() returned 0\n");
 
 	ret = -EINVAL;
 
-	if (!S_ISBLK(nd.path.dentry->d_inode->i_mode))
-		goto out;
-
-	if (nd.path.mnt->mnt_flags & MNT_NODEV) {
-		ret = -EACCES;
-		goto out;
-	}
+	major = MAJOR(bdev->bd_dev);
+	mtdnr = MINOR(bdev->bd_dev);
+	bdput(bdev);
 
-	if (imajor(nd.path.dentry->d_inode) != MTD_BLOCK_MAJOR)
+	if (major != MTD_BLOCK_MAJOR)
 		goto not_an_MTD_device;
 
-	mtdnr = iminor(nd.path.dentry->d_inode);
-	path_put(&nd.path);
-
 	return get_sb_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super,
 			     mnt);
 
 not_an_MTD_device:
+#endif /* CONFIG_BLOCK */
+
 	if (!(flags & MS_SILENT))
 		printk(KERN_NOTICE
 		       "MTD: Attempt to mount non-MTD device \"%s\"\n",
 		       dev_name);
-out:
-	path_put(&nd.path);
-	return ret;
-
+	return -EINVAL;
 }
 
 EXPORT_SYMBOL_GPL(get_sb_mtd);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 71406e51785..41f361c49b3 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -104,11 +104,24 @@ config MTD_NAND_BF5XX
 
 config MTD_NAND_BF5XX_HWECC
 	bool "BF5XX NAND Hardware ECC"
+	default y
 	depends on MTD_NAND_BF5XX
 	help
 	  Enable the use of the BF5XX's internal ECC generator when
 	  using NAND.
 
+config MTD_NAND_BF5XX_BOOTROM_ECC
+	bool "Use Blackfin BootROM ECC Layout"
+	default n
+	depends on MTD_NAND_BF5XX_HWECC
+	help
+	  If you wish to modify NAND pages and allow the Blackfin on-chip
+	  BootROM to boot from them, say Y here.  This is only necessary
+	  if you are booting U-Boot out of NAND and you wish to update
+	  U-Boot from Linux' userspace.  Otherwise, you should say N here.
+
+	  If unsure, say N.
+
 config MTD_NAND_RTC_FROM4
 	tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
 	depends on SH_SOLUTION_ENGINE
@@ -338,6 +351,13 @@ config MTD_NAND_PASEMI
 	  Enables support for NAND Flash interface on PA Semi PWRficient
 	  based boards
 
+config MTD_NAND_TMIO
+	tristate "NAND Flash device on Toshiba Mobile IO Controller"
+	depends on MTD_NAND && MFD_TMIO
+	help
+	  Support for NAND flash connected to a Toshiba Mobile IO
+	  Controller in some PDAs, including the Sharp SL6000x.
+
 config MTD_NAND_NANDSIM
 	tristate "Support for NAND Flash Simulator"
 	depends on MTD_PARTITIONS
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d772581de57..b786c5da82d 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
 obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
 obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index a0ba07c36ee..26d42987971 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -22,10 +22,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/board-ams-delta.h>
 
 /*
  * MTD structure for E3 (Delta)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 99aec46e214..3387e0d5076 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -32,8 +32,8 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
 #define hard_ecc	1
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 761946ea45b..92c334ff450 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -16,7 +16,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/version.h>
 #include <asm/io.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index 553dd7e9b41..7c95da1f612 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -32,9 +32,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
 
 /*
  * MTD structure for AUTCPU12 board
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index e87a5729732..9af2a2cc115 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -91,6 +91,41 @@ static const unsigned short bfin_nfc_pin_req[] =
 	 P_NAND_ALE,
 	 0};
 
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+static uint8_t bbt_pattern[] = { 0xff };
+
+static struct nand_bbt_descr bootrom_bbt = {
+	.options = 0,
+	.offs = 63,
+	.len = 1,
+	.pattern = bbt_pattern,
+};
+
+static struct nand_ecclayout bootrom_ecclayout = {
+	.eccbytes = 24,
+	.eccpos = {
+		0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
+		0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
+		0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
+		0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
+		0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
+		0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
+		0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
+		0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
+	},
+	.oobfree = {
+		{ 0x8 * 0 + 3, 5 },
+		{ 0x8 * 1 + 3, 5 },
+		{ 0x8 * 2 + 3, 5 },
+		{ 0x8 * 3 + 3, 5 },
+		{ 0x8 * 4 + 3, 5 },
+		{ 0x8 * 5 + 3, 5 },
+		{ 0x8 * 6 + 3, 5 },
+		{ 0x8 * 7 + 3, 5 },
+	}
+};
+#endif
+
 /*
  * Data structures for bf5xx nand flash controller driver
  */
@@ -273,7 +308,7 @@ static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 		dat += 256;
 		read_ecc += 8;
 		calc_ecc += 8;
-		ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+		ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
 	}
 
 	return ret;
@@ -298,7 +333,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 	ecc0 = bfin_read_NFC_ECC0();
 	ecc1 = bfin_read_NFC_ECC1();
 
-	code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+	code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 
 	dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
 
@@ -310,7 +345,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 	if (page_size == 512) {
 		ecc0 = bfin_read_NFC_ECC2();
 		ecc1 = bfin_read_NFC_ECC3();
-		code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+		code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 
 		/* second 3 bytes in ecc_code for second 256
 		 * bytes of 512 page size
@@ -514,7 +549,6 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
 /*
  * System initialization functions
  */
-
 static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
 {
 	int ret;
@@ -547,6 +581,13 @@ static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
 	return 0;
 }
 
+static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info)
+{
+	/* Free NFC DMA channel */
+	if (hardware_ecc)
+		free_dma(CH_NFC);
+}
+
 /*
  * BF5XX NFC hardware initialization
  *  - pin mux setup
@@ -605,7 +646,7 @@ static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
 #endif
 }
 
-static int bf5xx_nand_remove(struct platform_device *pdev)
+static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
 {
 	struct bf5xx_nand_info *info = to_nand_info(pdev);
 	struct mtd_info *mtd = NULL;
@@ -623,6 +664,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
 	}
 
 	peripheral_free_list(bfin_nfc_pin_req);
+	bf5xx_nand_dma_remove(info);
 
 	/* free the common resources */
 	kfree(info);
@@ -638,7 +680,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
  * it can allocate all necessary resources then calls the
  * nand layer to look for devices
  */
-static int bf5xx_nand_probe(struct platform_device *pdev)
+static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
 {
 	struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
 	struct bf5xx_nand_info *info = NULL;
@@ -648,22 +690,21 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "(%p)\n", pdev);
 
-	if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
-		printk(KERN_ERR DRV_NAME
-		": Requesting Peripherals failed\n");
-		return -EFAULT;
-	}
-
 	if (!plat) {
 		dev_err(&pdev->dev, "no platform specific information\n");
-		goto exit_error;
+		return -EINVAL;
+	}
+
+	if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
+		dev_err(&pdev->dev, "requesting Peripherals failed\n");
+		return -EFAULT;
 	}
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (info == NULL) {
 		dev_err(&pdev->dev, "no memory for flash info\n");
 		err = -ENOMEM;
-		goto exit_error;
+		goto out_err_kzalloc;
 	}
 
 	platform_set_drvdata(pdev, info);
@@ -707,11 +748,16 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
 	/* initialise the hardware */
 	err = bf5xx_nand_hw_init(info);
-	if (err != 0)
-		goto exit_error;
+	if (err)
+		goto out_err_hw_init;
 
 	/* setup hardware ECC data struct */
 	if (hardware_ecc) {
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+		chip->badblock_pattern = &bootrom_bbt;
+		chip->ecc.layout = &bootrom_ecclayout;
+#endif
+
 		if (plat->page_size == NFC_PG_SIZE_256) {
 			chip->ecc.bytes = 3;
 			chip->ecc.size = 256;
@@ -733,7 +779,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 	/* scan hardware nand chip and setup mtd info data struct */
 	if (nand_scan(mtd, 1)) {
 		err = -ENXIO;
-		goto exit_error;
+		goto out_err_nand_scan;
 	}
 
 	/* add NAND partition */
@@ -742,11 +788,14 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "initialised ok\n");
 	return 0;
 
-exit_error:
-	bf5xx_nand_remove(pdev);
+out_err_nand_scan:
+	bf5xx_nand_dma_remove(info);
+out_err_hw_init:
+	platform_set_drvdata(pdev, NULL);
+	kfree(info);
+out_err_kzalloc:
+	peripheral_free_list(bfin_nfc_pin_req);
 
-	if (err == 0)
-		err = -EINVAL;
 	return err;
 }
 
@@ -775,7 +824,7 @@ static int bf5xx_nand_resume(struct platform_device *dev)
 /* driver device registration */
 static struct platform_driver bf5xx_nand_driver = {
 	.probe		= bf5xx_nand_probe,
-	.remove		= bf5xx_nand_remove,
+	.remove		= __devexit_p(bf5xx_nand_remove),
 	.suspend	= bf5xx_nand_suspend,
 	.resume		= bf5xx_nand_resume,
 	.driver		= {
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index fc8529bedfd..9eba3f04783 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -26,8 +26,8 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 
 #define GPIO_NAND_CS	(11)
 #define GPIO_NAND_RB	(89)
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 765d4f0f7c8..e4226e02d63 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1125,9 +1125,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
 		goto out;
 	mh = (struct NFTLMediaHeader *)buf;
 
-	mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits);
-	mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN);
-	mh->FormattedSize = le32_to_cpu(mh->FormattedSize);
+	le16_to_cpus(&mh->NumEraseUnits);
+	le16_to_cpus(&mh->FirstPhysicalEUN);
+	le32_to_cpus(&mh->FormattedSize);
 
 	printk(KERN_INFO "    DataOrgID        = %s\n"
 			 "    NumEraseUnits    = %d\n"
@@ -1235,12 +1235,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
 	doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
 	mh = (struct INFTLMediaHeader *)buf;
 
-	mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
-	mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
-	mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions);
-	mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
-	mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
-	mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
+	le32_to_cpus(&mh->NoOfBootImageBlocks);
+	le32_to_cpus(&mh->NoOfBinaryPartitions);
+	le32_to_cpus(&mh->NoOfBDTLPartitions);
+	le32_to_cpus(&mh->BlockMultiplierBits);
+	le32_to_cpus(&mh->FormatFlags);
+	le32_to_cpus(&mh->PercentUsed);
 
 	printk(KERN_INFO "    bootRecordID          = %s\n"
 			 "    NoOfBootImageBlocks   = %d\n"
@@ -1277,12 +1277,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
 	/* Scan the partitions */
 	for (i = 0; (i < 4); i++) {
 		ip = &(mh->Partitions[i]);
-		ip->virtualUnits = le32_to_cpu(ip->virtualUnits);
-		ip->firstUnit = le32_to_cpu(ip->firstUnit);
-		ip->lastUnit = le32_to_cpu(ip->lastUnit);
-		ip->flags = le32_to_cpu(ip->flags);
-		ip->spareUnits = le32_to_cpu(ip->spareUnits);
-		ip->Reserved0 = le32_to_cpu(ip->Reserved0);
+		le32_to_cpus(&ip->virtualUnits);
+		le32_to_cpus(&ip->firstUnit);
+		le32_to_cpus(&ip->lastUnit);
+		le32_to_cpus(&ip->flags);
+		le32_to_cpus(&ip->spareUnits);
+		le32_to_cpus(&ip->Reserved0);
 
 		printk(KERN_INFO	"    PARTITION[%d] ->\n"
 			"        virtualUnits    = %d\n"
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 387e4352903..86366bfba9f 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>	/* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
 #include <asm/sizes.h>
 #include <asm/hardware/clps7111.h>
 
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 9dff51351f4..98ad3cefcaf 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -887,7 +887,7 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 		goto err;
 	}
 
-	priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", res.start);
+	priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
 	if (!priv->mtd.name) {
 		ret = -ENOMEM;
 		goto err;
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 9e59de501c2..f8ce79b446e 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -24,10 +24,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>	/* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
 #include <asm/sizes.h>
-#include <asm/arch/h1900-gpio.h>
-#include <asm/arch/ipaq.h>
+#include <mach/h1900-gpio.h>
+#include <mach/ipaq.h>
 
 /*
  * MTD structure for EDB7312 board
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index ecd70e2504f..556e8131ecd 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -28,6 +28,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
+#include <asm/div64.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/string.h>
@@ -207,13 +208,16 @@ MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the I
 #define STATE_CMD_READID       0x0000000A /* read ID */
 #define STATE_CMD_ERASE2       0x0000000B /* sector erase second command */
 #define STATE_CMD_RESET        0x0000000C /* reset */
+#define STATE_CMD_RNDOUT       0x0000000D /* random output command */
+#define STATE_CMD_RNDOUTSTART  0x0000000E /* random output start command */
 #define STATE_CMD_MASK         0x0000000F /* command states mask */
 
 /* After an address is input, the simulator goes to one of these states */
 #define STATE_ADDR_PAGE        0x00000010 /* full (row, column) address is accepted */
 #define STATE_ADDR_SEC         0x00000020 /* sector address was accepted */
-#define STATE_ADDR_ZERO        0x00000030 /* one byte zero address was accepted */
-#define STATE_ADDR_MASK        0x00000030 /* address states mask */
+#define STATE_ADDR_COLUMN      0x00000030 /* column address was accepted */
+#define STATE_ADDR_ZERO        0x00000040 /* one byte zero address was accepted */
+#define STATE_ADDR_MASK        0x00000070 /* address states mask */
 
 /* Durind data input/output the simulator is in these states */
 #define STATE_DATAIN           0x00000100 /* waiting for data input */
@@ -240,7 +244,7 @@ MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the I
 #define ACTION_OOBOFF    0x00600000 /* add to address OOB offset */
 #define ACTION_MASK      0x00700000 /* action mask */
 
-#define NS_OPER_NUM      12 /* Number of operations supported by the simulator */
+#define NS_OPER_NUM      13 /* Number of operations supported by the simulator */
 #define NS_OPER_STATES   6  /* Maximum number of states in operation */
 
 #define OPT_ANY          0xFFFFFFFF /* any chip supports this operation */
@@ -373,7 +377,10 @@ static struct nandsim_operations {
 	{OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
 	/* Large page devices read page */
 	{OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
-			       STATE_DATAOUT, STATE_READY}}
+			       STATE_DATAOUT, STATE_READY}},
+	/* Large page devices random page read */
+	{OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY,
+			       STATE_DATAOUT, STATE_READY}},
 };
 
 struct weak_block {
@@ -579,7 +586,8 @@ static int init_nandsim(struct mtd_info *mtd)
 	if (ns->busw == 16)
 		NS_WARN("16-bit flashes support wasn't tested\n");
 
-	printk("flash size: %llu MiB\n",        ns->geom.totsz >> 20);
+	printk("flash size: %llu MiB\n",
+			(unsigned long long)ns->geom.totsz >> 20);
 	printk("page size: %u bytes\n",         ns->geom.pgsz);
 	printk("OOB area size: %u bytes\n",     ns->geom.oobsz);
 	printk("sector size: %u KiB\n",         ns->geom.secsz >> 10);
@@ -588,8 +596,9 @@ static int init_nandsim(struct mtd_info *mtd)
 	printk("bus width: %u\n",               ns->busw);
 	printk("bits in sector size: %u\n",     ns->geom.secshift);
 	printk("bits in page size: %u\n",       ns->geom.pgshift);
-	printk("bits in OOB size: %u\n",        ns->geom.oobshift);
-	printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10);
+	printk("bits in OOB size: %u\n",	ns->geom.oobshift);
+	printk("flash size with OOB: %llu KiB\n",
+			(unsigned long long)ns->geom.totszoob >> 10);
 	printk("page address bytes: %u\n",      ns->geom.pgaddrbytes);
 	printk("sector address bytes: %u\n",    ns->geom.secaddrbytes);
 	printk("options: %#x\n",                ns->options);
@@ -937,12 +946,18 @@ static char *get_state_name(uint32_t state)
 			return "STATE_CMD_ERASE2";
 		case STATE_CMD_RESET:
 			return "STATE_CMD_RESET";
+		case STATE_CMD_RNDOUT:
+			return "STATE_CMD_RNDOUT";
+		case STATE_CMD_RNDOUTSTART:
+			return "STATE_CMD_RNDOUTSTART";
 		case STATE_ADDR_PAGE:
 			return "STATE_ADDR_PAGE";
 		case STATE_ADDR_SEC:
 			return "STATE_ADDR_SEC";
 		case STATE_ADDR_ZERO:
 			return "STATE_ADDR_ZERO";
+		case STATE_ADDR_COLUMN:
+			return "STATE_ADDR_COLUMN";
 		case STATE_DATAIN:
 			return "STATE_DATAIN";
 		case STATE_DATAOUT:
@@ -973,6 +988,7 @@ static int check_command(int cmd)
 	switch (cmd) {
 
 	case NAND_CMD_READ0:
+	case NAND_CMD_READ1:
 	case NAND_CMD_READSTART:
 	case NAND_CMD_PAGEPROG:
 	case NAND_CMD_READOOB:
@@ -982,7 +998,8 @@ static int check_command(int cmd)
 	case NAND_CMD_READID:
 	case NAND_CMD_ERASE2:
 	case NAND_CMD_RESET:
-	case NAND_CMD_READ1:
+	case NAND_CMD_RNDOUT:
+	case NAND_CMD_RNDOUTSTART:
 		return 0;
 
 	case NAND_CMD_STATUS_MULTI:
@@ -1021,6 +1038,10 @@ static uint32_t get_state_by_command(unsigned command)
 			return STATE_CMD_ERASE2;
 		case NAND_CMD_RESET:
 			return STATE_CMD_RESET;
+		case NAND_CMD_RNDOUT:
+			return STATE_CMD_RNDOUT;
+		case NAND_CMD_RNDOUTSTART:
+			return STATE_CMD_RNDOUTSTART;
 	}
 
 	NS_ERR("get_state_by_command: unknown command, BUG\n");
@@ -1582,6 +1603,11 @@ static void switch_state(struct nandsim *ns)
 				ns->regs.num = 1;
 				break;
 
+			case STATE_ADDR_COLUMN:
+				/* Column address is always 2 bytes */
+				ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes;
+				break;
+
 			default:
 				NS_ERR("switch_state: BUG! unknown address state\n");
 		}
@@ -1693,15 +1719,21 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
 			return;
 		}
 
-		/*
-		 * Chip might still be in STATE_DATAOUT
-		 * (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or
-		 * STATE_DATAOUT_STATUS_M state. If so, switch state.
-		 */
+		/* Check that the command byte is correct */
+		if (check_command(byte)) {
+			NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
+			return;
+		}
+
 		if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
 			|| NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
-			|| ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT))
+			|| NS_STATE(ns->state) == STATE_DATAOUT) {
+			int row = ns->regs.row;
+
 			switch_state(ns);
+			if (byte == NAND_CMD_RNDOUT)
+				ns->regs.row = row;
+		}
 
 		/* Check if chip is expecting command */
 		if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
@@ -1715,12 +1747,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
 			switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
 		}
 
-		/* Check that the command byte is correct */
-		if (check_command(byte)) {
-			NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
-			return;
-		}
-
 		NS_DBG("command byte corresponding to %s state accepted\n",
 			get_state_name(get_state_by_command(byte)));
 		ns->regs.command = byte;
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index ee2ac3948cd..917cf8d3ae9 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -18,8 +18,8 @@
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/arch/hardware.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/hardware.h>
+#include <plat/orion_nand.h>
 
 #ifdef CONFIG_MTD_CMDLINE_PARTS
 static const char *part_probes[] = { "cmdlinepart", NULL };
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index fe2bc7e4211..a64ad15b8fd 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -22,8 +22,8 @@
 #include <linux/irq.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa3xx_nand.h>
 
 #define	CHIP_DELAY_TIMEOUT	(2 * HZ/10)
 
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 6dba2fb66ae..30a518e211b 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -21,7 +21,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/interrupt.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static void __iomem *sharpsl_io_base;
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
new file mode 100644
index 00000000000..edb1e322113
--- /dev/null
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -0,0 +1,556 @@
+/*
+ * Toshiba TMIO NAND flash controller driver
+ *
+ * Slightly murky pre-git history of the driver:
+ *
+ * Copyright (c) Ian Molton 2004, 2005, 2008
+ *    Original work, independant of sharps code. Included hardware ECC support.
+ *    Hard ECC did not work for writes in the early revisions.
+ * Copyright (c) Dirk Opfer 2005.
+ *    Modifications developed from sharps code but
+ *    NOT containing any, ported onto Ians base.
+ * Copyright (c) Chris Humbert 2005
+ * Copyright (c) Dmitry Baryshkov 2008
+ *    Minor fixes
+ *
+ * Parts copyright Sebastian Carlier
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * NAND Flash Host Controller Configuration Register
+ */
+#define CCR_COMMAND	0x04	/* w Command				*/
+#define CCR_BASE	0x10	/* l NAND Flash Control Reg Base Addr	*/
+#define CCR_INTP	0x3d	/* b Interrupt Pin			*/
+#define CCR_INTE	0x48	/* b Interrupt Enable			*/
+#define CCR_EC		0x4a	/* b Event Control			*/
+#define CCR_ICC		0x4c	/* b Internal Clock Control		*/
+#define CCR_ECCC	0x5b	/* b ECC Control			*/
+#define CCR_NFTC	0x60	/* b NAND Flash Transaction Control	*/
+#define CCR_NFM		0x61	/* b NAND Flash Monitor			*/
+#define CCR_NFPSC	0x62	/* b NAND Flash Power Supply Control	*/
+#define CCR_NFDC	0x63	/* b NAND Flash Detect Control		*/
+
+/*
+ * NAND Flash Control Register
+ */
+#define FCR_DATA	0x00	/* bwl Data Register			*/
+#define FCR_MODE	0x04	/* b Mode Register			*/
+#define FCR_STATUS	0x05	/* b Status Register			*/
+#define FCR_ISR		0x06	/* b Interrupt Status Register		*/
+#define FCR_IMR		0x07	/* b Interrupt Mask Register		*/
+
+/* FCR_MODE Register Command List */
+#define FCR_MODE_DATA	0x94	/* Data Data_Mode */
+#define FCR_MODE_COMMAND 0x95	/* Data Command_Mode */
+#define FCR_MODE_ADDRESS 0x96	/* Data Address_Mode */
+
+#define FCR_MODE_HWECC_CALC	0xB4	/* HW-ECC Data */
+#define FCR_MODE_HWECC_RESULT	0xD4	/* HW-ECC Calc result Read_Mode */
+#define FCR_MODE_HWECC_RESET	0xF4	/* HW-ECC Reset */
+
+#define FCR_MODE_POWER_ON	0x0C	/* Power Supply ON  to SSFDC card */
+#define FCR_MODE_POWER_OFF	0x08	/* Power Supply OFF to SSFDC card */
+
+#define FCR_MODE_LED_OFF	0x00	/* LED OFF */
+#define FCR_MODE_LED_ON		0x04	/* LED ON */
+
+#define FCR_MODE_EJECT_ON	0x68	/* Ejection events active  */
+#define FCR_MODE_EJECT_OFF	0x08	/* Ejection events ignored */
+
+#define FCR_MODE_LOCK		0x6C	/* Lock_Mode. Eject Switch Invalid */
+#define FCR_MODE_UNLOCK		0x0C	/* UnLock_Mode. Eject Switch is valid */
+
+#define FCR_MODE_CONTROLLER_ID	0x40	/* Controller ID Read */
+#define FCR_MODE_STANDBY	0x00	/* SSFDC card Changes Standby State */
+
+#define FCR_MODE_WE		0x80
+#define FCR_MODE_ECC1		0x40
+#define FCR_MODE_ECC0		0x20
+#define FCR_MODE_CE		0x10
+#define FCR_MODE_PCNT1		0x08
+#define FCR_MODE_PCNT0		0x04
+#define FCR_MODE_ALE		0x02
+#define FCR_MODE_CLE		0x01
+
+#define FCR_STATUS_BUSY		0x80
+
+/*--------------------------------------------------------------------------*/
+
+struct tmio_nand {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+
+	struct platform_device *dev;
+
+	void __iomem *ccr;
+	void __iomem *fcr;
+	unsigned long fcr_base;
+
+	unsigned int irq;
+
+	/* for tmio_nand_read_byte */
+	u8			read;
+	unsigned read_good:1;
+};
+
+#define mtd_to_tmio(m)			container_of(m, struct tmio_nand, mtd)
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+				   unsigned int ctrl)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	struct nand_chip *chip = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		u8 mode;
+
+		if (ctrl & NAND_NCE) {
+			mode = FCR_MODE_DATA;
+
+			if (ctrl & NAND_CLE)
+				mode |=  FCR_MODE_CLE;
+			else
+				mode &= ~FCR_MODE_CLE;
+
+			if (ctrl & NAND_ALE)
+				mode |=  FCR_MODE_ALE;
+			else
+				mode &= ~FCR_MODE_ALE;
+		} else {
+			mode = FCR_MODE_STANDBY;
+		}
+
+		tmio_iowrite8(mode, tmio->fcr + FCR_MODE);
+		tmio->read_good = 0;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		tmio_iowrite8(cmd, chip->IO_ADDR_W);
+}
+
+static int tmio_nand_dev_ready(struct mtd_info *mtd)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	return !(tmio_ioread8(tmio->fcr + FCR_STATUS) & FCR_STATUS_BUSY);
+}
+
+static irqreturn_t tmio_irq(int irq, void *__tmio)
+{
+	struct tmio_nand *tmio = __tmio;
+	struct nand_chip *nand_chip = &tmio->chip;
+
+	/* disable RDYREQ interrupt */
+	tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+
+	if (unlikely(!waitqueue_active(&nand_chip->controller->wq)))
+		dev_warn(&tmio->dev->dev, "spurious interrupt\n");
+
+	wake_up(&nand_chip->controller->wq);
+	return IRQ_HANDLED;
+}
+
+/*
+  *The TMIO core has a RDYREQ interrupt on the posedge of #SMRB.
+  *This interrupt is normally disabled, but for long operations like
+  *erase and write, we enable it to wake us up.  The irq handler
+  *disables the interrupt.
+ */
+static int
+tmio_nand_wait(struct mtd_info *mtd, struct nand_chip *nand_chip)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	long timeout;
+
+	/* enable RDYREQ interrupt */
+	tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+	tmio_iowrite8(0x81, tmio->fcr + FCR_IMR);
+
+	timeout = wait_event_timeout(nand_chip->controller->wq,
+		tmio_nand_dev_ready(mtd),
+		msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20));
+
+	if (unlikely(!tmio_nand_dev_ready(mtd))) {
+		tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+		dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n",
+			nand_chip->state == FL_ERASING ? "erase" : "program",
+			nand_chip->state == FL_ERASING ? 400 : 20);
+
+	} else if (unlikely(!timeout)) {
+		tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+		dev_warn(&tmio->dev->dev, "timeout waiting for interrupt\n");
+	}
+
+	nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+	return nand_chip->read_byte(mtd);
+}
+
+/*
+  *The TMIO controller combines two 8-bit data bytes into one 16-bit
+  *word. This function separates them so nand_base.c works as expected,
+  *especially its NAND_CMD_READID routines.
+ *
+  *To prevent stale data from being read, tmio_nand_hwcontrol() clears
+  *tmio->read_good.
+ */
+static u_char tmio_nand_read_byte(struct mtd_info *mtd)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	unsigned int data;
+
+	if (tmio->read_good--)
+		return tmio->read;
+
+	data = tmio_ioread16(tmio->fcr + FCR_DATA);
+	tmio->read = data >> 8;
+	return data;
+}
+
+/*
+  *The TMIO controller converts an 8-bit NAND interface to a 16-bit
+  *bus interface, so all data reads and writes must be 16-bit wide.
+  *Thus, we implement 16-bit versions of the read, write, and verify
+  *buffer functions.
+ */
+static void
+tmio_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_iowrite16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_ioread16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static int
+tmio_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	u16				*p = (u16 *) buf;
+
+	for (len >>= 1; len; len--)
+		if (*(p++) != tmio_ioread16(tmio->fcr + FCR_DATA))
+			return -EFAULT;
+	return 0;
+}
+
+static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_iowrite8(FCR_MODE_HWECC_RESET, tmio->fcr + FCR_MODE);
+	tmio_ioread8(tmio->fcr + FCR_DATA);	/* dummy read */
+	tmio_iowrite8(FCR_MODE_HWECC_CALC, tmio->fcr + FCR_MODE);
+}
+
+static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+							u_char *ecc_code)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	unsigned int ecc;
+
+	tmio_iowrite8(FCR_MODE_HWECC_RESULT, tmio->fcr + FCR_MODE);
+
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[1] = ecc;	/* 000-255 LP7-0 */
+	ecc_code[0] = ecc >> 8;	/* 000-255 LP15-8 */
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[2] = ecc;	/* 000-255 CP5-0,11b */
+	ecc_code[4] = ecc >> 8;	/* 256-511 LP7-0 */
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[3] = ecc;	/* 256-511 LP15-8 */
+	ecc_code[5] = ecc >> 8;	/* 256-511 CP5-0,11b */
+
+	tmio_iowrite8(FCR_MODE_DATA, tmio->fcr + FCR_MODE);
+	return 0;
+}
+
+static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+	int ret;
+
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			return ret;
+	}
+
+	/* (4Ch) CLKRUN Enable    1st spcrunc */
+	tmio_iowrite8(0x81, tmio->ccr + CCR_ICC);
+
+	/* (10h)BaseAddress    0x1000 spba.spba2 */
+	tmio_iowrite16(tmio->fcr_base, tmio->ccr + CCR_BASE);
+	tmio_iowrite16(tmio->fcr_base >> 16, tmio->ccr + CCR_BASE + 2);
+
+	/* (04h)Command Register I/O spcmd */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND);
+
+	/* (62h) Power Supply Control ssmpwc */
+	/* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_NFPSC);
+
+	/* (63h) Detect Control ssmdtc */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_NFDC);
+
+	/* Interrupt status register clear sintst */
+	tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+
+	/* After power supply, Media are reset smode */
+	tmio_iowrite8(FCR_MODE_POWER_ON, tmio->fcr + FCR_MODE);
+	tmio_iowrite8(FCR_MODE_COMMAND, tmio->fcr + FCR_MODE);
+	tmio_iowrite8(NAND_CMD_RESET, tmio->fcr + FCR_DATA);
+
+	/* Standby Mode smode */
+	tmio_iowrite8(FCR_MODE_STANDBY, tmio->fcr + FCR_MODE);
+
+	mdelay(5);
+
+	return 0;
+}
+
+static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	tmio_iowrite8(FCR_MODE_POWER_OFF, tmio->fcr + FCR_MODE);
+	if (cell->disable)
+		cell->disable(dev);
+}
+
+static int tmio_probe(struct platform_device *dev)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct tmio_nand_data *data = cell->driver_data;
+	struct resource *fcr = platform_get_resource(dev,
+			IORESOURCE_MEM, 0);
+	struct resource *ccr = platform_get_resource(dev,
+			IORESOURCE_MEM, 1);
+	int irq = platform_get_irq(dev, 0);
+	struct tmio_nand *tmio;
+	struct mtd_info *mtd;
+	struct nand_chip *nand_chip;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int nbparts = 0;
+#endif
+	int retval;
+
+	if (data == NULL)
+		dev_warn(&dev->dev, "NULL platform data!\n");
+
+	tmio = kzalloc(sizeof *tmio, GFP_KERNEL);
+	if (!tmio) {
+		retval = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	tmio->dev = dev;
+
+	platform_set_drvdata(dev, tmio);
+	mtd = &tmio->mtd;
+	nand_chip = &tmio->chip;
+	mtd->priv = nand_chip;
+	mtd->name = "tmio-nand";
+
+	tmio->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1);
+	if (!tmio->ccr) {
+		retval = -EIO;
+		goto err_iomap_ccr;
+	}
+
+	tmio->fcr_base = fcr->start & 0xfffff;
+	tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
+	if (!tmio->fcr) {
+		retval = -EIO;
+		goto err_iomap_fcr;
+	}
+
+	retval = tmio_hw_init(dev, tmio);
+	if (retval)
+		goto err_hwinit;
+
+	/* Set address of NAND IO lines */
+	nand_chip->IO_ADDR_R = tmio->fcr;
+	nand_chip->IO_ADDR_W = tmio->fcr;
+
+	/* Set address of hardware control function */
+	nand_chip->cmd_ctrl = tmio_nand_hwcontrol;
+	nand_chip->dev_ready = tmio_nand_dev_ready;
+	nand_chip->read_byte = tmio_nand_read_byte;
+	nand_chip->write_buf = tmio_nand_write_buf;
+	nand_chip->read_buf = tmio_nand_read_buf;
+	nand_chip->verify_buf = tmio_nand_verify_buf;
+
+	/* set eccmode using hardware ECC */
+	nand_chip->ecc.mode = NAND_ECC_HW;
+	nand_chip->ecc.size = 512;
+	nand_chip->ecc.bytes = 6;
+	nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
+	nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
+	nand_chip->ecc.correct = nand_correct_data;
+
+	if (data)
+		nand_chip->badblock_pattern = data->badblock_pattern;
+
+	/* 15 us command delay time */
+	nand_chip->chip_delay = 15;
+
+	retval = request_irq(irq, &tmio_irq,
+				IRQF_DISABLED, dev->dev.bus_id, tmio);
+	if (retval) {
+		dev_err(&dev->dev, "request_irq error %d\n", retval);
+		goto err_irq;
+	}
+
+	tmio->irq = irq;
+	nand_chip->waitfunc = tmio_nand_wait;
+
+	/* Scan to find existence of the device */
+	if (nand_scan(mtd, 1)) {
+		retval = -ENODEV;
+		goto err_scan;
+	}
+	/* Register the partitions */
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
+#endif
+	if (nbparts <= 0 && data) {
+		parts = data->partition;
+		nbparts = data->num_partitions;
+	}
+
+	if (nbparts)
+		retval = add_mtd_partitions(mtd, parts, nbparts);
+	else
+#endif
+	retval = add_mtd_device(mtd);
+
+	if (!retval)
+		return retval;
+
+	nand_release(mtd);
+
+err_scan:
+	if (tmio->irq)
+		free_irq(tmio->irq, tmio);
+err_irq:
+	tmio_hw_stop(dev, tmio);
+err_hwinit:
+	iounmap(tmio->fcr);
+err_iomap_fcr:
+	iounmap(tmio->ccr);
+err_iomap_ccr:
+	kfree(tmio);
+err_kzalloc:
+	return retval;
+}
+
+static int tmio_remove(struct platform_device *dev)
+{
+	struct tmio_nand *tmio = platform_get_drvdata(dev);
+
+	nand_release(&tmio->mtd);
+	if (tmio->irq)
+		free_irq(tmio->irq, tmio);
+	tmio_hw_stop(dev, tmio);
+	iounmap(tmio->fcr);
+	iounmap(tmio->ccr);
+	kfree(tmio);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tmio_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	if (cell->suspend)
+		cell->suspend(dev);
+
+	tmio_hw_stop(dev, platform_get_drvdata(dev));
+	return 0;
+}
+
+static int tmio_resume(struct platform_device *dev)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	/* FIXME - is this required or merely another attack of the broken
+	 * SHARP platform? Looks suspicious.
+	 */
+	tmio_hw_init(dev, platform_get_drvdata(dev));
+
+	if (cell->resume)
+		cell->resume(dev);
+
+	return 0;
+}
+#else
+#define tmio_suspend NULL
+#define tmio_resume NULL
+#endif
+
+static struct platform_driver tmio_driver = {
+	.driver.name	= "tmio-nand",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tmio_probe,
+	.remove		= tmio_remove,
+	.suspend	= tmio_suspend,
+	.resume		= tmio_resume,
+};
+
+static int __init tmio_init(void)
+{
+	return platform_driver_register(&tmio_driver);
+}
+
+static void __exit tmio_exit(void)
+{
+	platform_driver_unregister(&tmio_driver);
+}
+
+module_init(tmio_init);
+module_exit(tmio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton, Dirk Opfer, Chris Humbert, Dmitry Baryshkov");
+MODULE_DESCRIPTION("NAND flash driver on Toshiba Mobile IO controller");
+MODULE_ALIAS("platform:tmio-nand");
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index 807a72752ee..2c410a01131 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -25,7 +25,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index dc6e474229b..e2ce41d3828 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -640,10 +640,8 @@ static int init586(struct net_device *dev)
 	cfg_cmd->time_low = 0x00;
 	cfg_cmd->time_high = 0xf2;
 	cfg_cmd->promisc = 0;
-	if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC)) {
+	if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC))
 		cfg_cmd->promisc = 1;
-		dev->flags |= IFF_PROMISC;
-	}
 	cfg_cmd->carr_coll = 0x00;
 
 	p->scb->cbl_offset = make16(cfg_cmd);
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 6aca0c640f1..abc84f76597 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -1521,14 +1521,11 @@ static void do_mc32_set_multicast_list(struct net_device *dev, int retry)
 	struct mc32_local *lp = netdev_priv(dev);
 	u16 filt = (1<<2); /* Save Bad Packets, for stats purposes */
 
-	if (dev->flags&IFF_PROMISC)
+	if ((dev->flags&IFF_PROMISC) ||
+	    (dev->flags&IFF_ALLMULTI) ||
+	    dev->mc_count > 10)
 		/* Enable promiscuous mode */
 		filt |= 1;
-	else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > 10)
-	{
-		dev->flags|=IFF_PROMISC;
-		filt |= 1;
-	}
 	else if(dev->mc_count)
 	{
 		unsigned char block[62];
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 8db4e6b8948..491ee16da5c 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -1692,12 +1692,14 @@ vortex_open(struct net_device *dev)
 			vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
 			vp->rx_ring[i].status = 0;	/* Clear complete bit. */
 			vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG);
-			skb = dev_alloc_skb(PKT_BUF_SZ);
+
+			skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN,
+						 GFP_KERNEL);
 			vp->rx_skbuff[i] = skb;
 			if (skb == NULL)
 				break;			/* Bad news!  */
-			skb->dev = dev;			/* Mark as being used by this device. */
-			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+
+			skb_reserve(skb, NET_IP_ALIGN);	/* Align IP on 16 byte boundaries */
 			vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 		}
 		if (i != RX_RING_SIZE) {
@@ -2538,7 +2540,7 @@ boomerang_rx(struct net_device *dev)
 		struct sk_buff *skb;
 		entry = vp->dirty_rx % RX_RING_SIZE;
 		if (vp->rx_skbuff[entry] == NULL) {
-			skb = dev_alloc_skb(PKT_BUF_SZ);
+			skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN);
 			if (skb == NULL) {
 				static unsigned long last_jif;
 				if (time_after(jiffies, last_jif + 10 * HZ)) {
@@ -2549,8 +2551,8 @@ boomerang_rx(struct net_device *dev)
 					mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1));
 				break;			/* Bad news!  */
 			}
-			skb->dev = dev;			/* Mark as being used by this device. */
-			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+
+			skb_reserve(skb, NET_IP_ALIGN);
 			vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 			vp->rx_skbuff[entry] = skb;
 		}
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index dc5d2584bd0..f72a2e87d56 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -9,42 +9,39 @@ int ei_open(struct net_device *dev)
 {
 	return __ei_open(dev);
 }
+EXPORT_SYMBOL(ei_open);
 
 int ei_close(struct net_device *dev)
 {
 	return __ei_close(dev);
 }
+EXPORT_SYMBOL(ei_close);
 
 irqreturn_t ei_interrupt(int irq, void *dev_id)
 {
 	return __ei_interrupt(irq, dev_id);
 }
+EXPORT_SYMBOL(ei_interrupt);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void ei_poll(struct net_device *dev)
 {
 	__ei_poll(dev);
 }
+EXPORT_SYMBOL(ei_poll);
 #endif
 
 struct net_device *__alloc_ei_netdev(int size)
 {
 	return ____alloc_ei_netdev(size);
 }
+EXPORT_SYMBOL(__alloc_ei_netdev);
 
 void NS8390_init(struct net_device *dev, int startp)
 {
 	__NS8390_init(dev, startp);
 }
-
-EXPORT_SYMBOL(ei_open);
-EXPORT_SYMBOL(ei_close);
-EXPORT_SYMBOL(ei_interrupt);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-EXPORT_SYMBOL(ei_poll);
-#endif
 EXPORT_SYMBOL(NS8390_init);
-EXPORT_SYMBOL(__alloc_ei_netdev);
 
 #if defined(MODULE)
 
diff --git a/drivers/net/8390p.c b/drivers/net/8390p.c
index 71f19884c4b..4c6eea4611a 100644
--- a/drivers/net/8390p.c
+++ b/drivers/net/8390p.c
@@ -4,9 +4,9 @@ static const char version[] =
     "8390p.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
 
 #define ei_inb(_p)	inb(_p)
-#define ei_outb(_v,_p)	outb(_v,_p)
+#define ei_outb(_v, _p)	outb(_v, _p)
 #define ei_inb_p(_p)	inb_p(_p)
-#define ei_outb_p(_v,_p) outb_p(_v,_p)
+#define ei_outb_p(_v, _p) outb_p(_v, _p)
 
 #include "lib8390.c"
 
@@ -14,42 +14,39 @@ int eip_open(struct net_device *dev)
 {
 	return __ei_open(dev);
 }
+EXPORT_SYMBOL(eip_open);
 
 int eip_close(struct net_device *dev)
 {
 	return __ei_close(dev);
 }
+EXPORT_SYMBOL(eip_close);
 
 irqreturn_t eip_interrupt(int irq, void *dev_id)
 {
 	return __ei_interrupt(irq, dev_id);
 }
+EXPORT_SYMBOL(eip_interrupt);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void eip_poll(struct net_device *dev)
 {
 	__ei_poll(dev);
 }
+EXPORT_SYMBOL(eip_poll);
 #endif
 
 struct net_device *__alloc_eip_netdev(int size)
 {
 	return ____alloc_ei_netdev(size);
 }
+EXPORT_SYMBOL(__alloc_eip_netdev);
 
 void NS8390p_init(struct net_device *dev, int startp)
 {
-	return __NS8390_init(dev, startp);
+	__NS8390_init(dev, startp);
 }
-
-EXPORT_SYMBOL(eip_open);
-EXPORT_SYMBOL(eip_close);
-EXPORT_SYMBOL(eip_interrupt);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-EXPORT_SYMBOL(eip_poll);
-#endif
 EXPORT_SYMBOL(NS8390p_init);
-EXPORT_SYMBOL(__alloc_eip_netdev);
 
 #if defined(MODULE)
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fa533c27052..4a11296a951 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -510,14 +510,15 @@ config STNIC
 config SH_ETH
 	tristate "Renesas SuperH Ethernet support"
 	depends on SUPERH && \
-		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712)
+		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
+		 CPU_SUBTYPE_SH7619)
 	select CRC32
 	select MII
 	select MDIO_BITBANG
 	select PHYLIB
 	help
 	  Renesas SuperH Ethernet device driver.
-	  This driver support SH7710 and SH7712.
+	  This driver support SH7710, SH7712, SH7763 and SH7619.
 
 config SUNLANCE
 	tristate "Sun LANCE support"
@@ -821,14 +822,14 @@ config ULTRA32
 	  will be called smc-ultra32.
 
 config BFIN_MAC
-	tristate "Blackfin 527/536/537 on-chip mac support"
-	depends on NET_ETHERNET && (BF527 || BF537 || BF536)
+	tristate "Blackfin on-chip MAC support"
+	depends on NET_ETHERNET && (BF526 || BF527 || BF536 || BF537)
 	select CRC32
 	select MII
 	select PHYLIB
 	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
 	help
-	  This is the driver for blackfin on-chip mac device. Say Y if you want it
+	  This is the driver for Blackfin on-chip mac device. Say Y if you want it
 	  compiled into the kernel. This driver is also available as a module
 	  ( = code which can be inserted in and removed from the running kernel
 	  whenever you want). The module will be called bfin_mac.
@@ -1171,7 +1172,7 @@ config ETH16I
 
 config NE2000
 	tristate "NE2000/NE1000 support"
-	depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
+	depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
 	select CRC32
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index e4483de84e7..66de80b64b9 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -52,7 +52,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index a637910b02d..aa4a5246be5 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -28,7 +28,7 @@
 #include <linux/bitops.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index ffae266e2d7..0fa53464efb 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -32,9 +32,9 @@
 #include <asm/uaccess.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/at91rm9200_emac.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/board.h>
+#include <mach/at91rm9200_emac.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
 
 #include "at91_ether.h"
 
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 18d3eeb7eab..1267444d79d 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -20,8 +20,8 @@
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <asm/arch/ep93xx-regs.h>
-#include <asm/arch/platform.h>
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
 #include <asm/io.h>
 
 #define DRV_MODULE_NAME		"ep93xx-eth"
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 9b777d9433c..e2d702b8b2e 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -32,8 +32,8 @@
 #include <linux/kernel.h>
 #include <linux/mii.h>
 #include <linux/platform_device.h>
-#include <asm/arch/npe.h>
-#include <asm/arch/qmgr.h>
+#include <mach/npe.h>
+#include <mach/qmgr.h>
 
 #define DEBUG_QUEUES		0
 #define DEBUG_DESC		0
@@ -551,7 +551,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
 		if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
 			phys = dma_map_single(&dev->dev, skb->data,
 					      RX_BUFF_SIZE, DMA_FROM_DEVICE);
-			if (dma_mapping_error(phys)) {
+			if (dma_mapping_error(&dev->dev, phys)) {
 				dev_kfree_skb(skb);
 				skb = NULL;
 			}
@@ -698,7 +698,7 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
 	phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-	if (dma_mapping_error(phys)) {
+	if (dma_mapping_error(&dev->dev, phys)) {
 #ifdef __ARMEB__
 		dev_kfree_skb(skb);
 #else
@@ -883,7 +883,7 @@ static int init_queues(struct port *port)
 		desc->buf_len = MAX_MRU;
 		desc->data = dma_map_single(&port->netdev->dev, data,
 					    RX_BUFF_SIZE, DMA_FROM_DEVICE);
-		if (dma_mapping_error(desc->data)) {
+		if (dma_mapping_error(&port->netdev->dev, desc->data)) {
 			free_buffer(buff);
 			return -EIO;
 		}
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index cdc3b85b10b..619c6583e1a 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -355,7 +355,7 @@ static int atl1e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	struct atl1e_adapter *adapter = netdev_priv(netdev);
 
 	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
-			    WAKE_MCAST | WAKE_BCAST | WAKE_MCAST))
+			    WAKE_UCAST | WAKE_MCAST | WAKE_BCAST))
 		return -EOPNOTSUPP;
 	/* these settings will always override what we currently have */
 	adapter->wol = 0;
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 35264c244cf..7685b995ff9 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -47,7 +47,7 @@ MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
-static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter);
+static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter);
 
 static const u16
 atl1e_rx_page_vld_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] =
@@ -1037,7 +1037,7 @@ static inline void atl1e_configure_dma(struct atl1e_adapter *adapter)
 	return;
 }
 
-static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
+static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
 {
 	u32 value;
 	struct atl1e_hw *hw = &adapter->hw;
@@ -2232,10 +2232,11 @@ static int atl1e_resume(struct pci_dev *pdev)
 
 	AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
 
-	if (netif_running(netdev))
+	if (netif_running(netdev)) {
 		err = atl1e_request_irq(adapter);
 		if (err)
 			return err;
+	}
 
 	atl1e_reset_hw(&adapter->hw);
 
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index f12e3d12474..e23ce77712f 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -1790,6 +1790,17 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter,
 {
 	struct pci_dev *pdev = adapter->pdev;
 
+	/*
+	 * The L1 hardware contains a bug that erroneously sets the
+	 * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a
+	 * fragmented IP packet is received, even though the packet
+	 * is perfectly valid and its checksum is correct. There's
+	 * no way to distinguish between one of these good packets
+	 * and a packet that actually contains a TCP/UDP checksum
+	 * error, so all we can do is allow it to be handed up to
+	 * the higher layers and let it be sorted out there.
+	 */
+
 	skb->ip_summed = CHECKSUM_NONE;
 
 	if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
@@ -1816,14 +1827,6 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter,
 		return;
 	}
 
-	/* IPv4, but hardware thinks its checksum is wrong */
-	if (netif_msg_rx_err(adapter))
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"hw csum wrong, pkt_flag:%x, err_flag:%x\n",
-			rrd->pkt_flg, rrd->err_flg);
-	skb->ip_summed = CHECKSUM_COMPLETE;
-	skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum);
-	adapter->hw_csum_err++;
 	return;
 }
 
@@ -3019,7 +3022,6 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
 	netdev->features = NETIF_F_HW_CSUM;
 	netdev->features |= NETIF_F_SG;
 	netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
-	netdev->features |= NETIF_F_TSO;
 	netdev->features |= NETIF_F_LLTX;
 
 	/*
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index 3d4433358a3..c10cd8058e2 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -854,14 +854,9 @@ static void set_rx_mode_8002(struct net_device *dev)
 	struct net_local *lp = netdev_priv(dev);
 	long ioaddr = dev->base_addr;
 
-	if ( dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC))) {
-		/* We must make the kernel realise we had to move
-		 *	into promisc mode or we start all out war on
-		 *	the cable. - AC
-		 */
-		dev->flags|=IFF_PROMISC;
+	if (dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC)))
 		lp->addr_mode = CMR2h_PROMISC;
-	} else
+	else
 		lp->addr_mode = CMR2h_Normal;
 	write_reg_high(ioaddr, CMR2, lp->addr_mode);
 }
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index cb8be490e5a..5ee1b0557a0 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -807,7 +807,7 @@ err_out:
 static int au1000_init(struct net_device *dev)
 {
 	struct au1000_private *aup = (struct au1000_private *) dev->priv;
-	u32 flags;
+	unsigned long flags;
 	int i;
 	u32 control;
 
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 0b4adf4a0f7..a886a4b9f7e 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -554,7 +554,7 @@ static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	spin_lock_irqsave(&ax->mii_lock, flags);
 	mii_ethtool_gset(&ax->mii, cmd);
-	spin_lock_irqsave(&ax->mii_lock, flags);
+	spin_unlock_irqrestore(&ax->mii_lock, flags);
 
 	return 0;
 }
@@ -567,7 +567,7 @@ static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	spin_lock_irqsave(&ax->mii_lock, flags);
 	rc = mii_ethtool_sset(&ax->mii, cmd);
-	spin_lock_irqsave(&ax->mii_lock, flags);
+	spin_unlock_irqrestore(&ax->mii_lock, flags);
 
 	return rc;
 }
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index a8ec60e1ed7..3db7db1828e 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -605,36 +605,87 @@ adjust_head:
 static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
 				struct net_device *dev)
 {
-	unsigned int data;
+	u16 *data;
 
 	current_tx_ptr->skb = skb;
 
-	/*
-	 * Is skb->data always 16-bit aligned?
-	 * Do we need to memcpy((char *)(tail->packet + 2), skb->data, len)?
-	 */
-	if ((((unsigned int)(skb->data)) & 0x02) == 2) {
-		/* move skb->data to current_tx_ptr payload */
-		data = (unsigned int)(skb->data) - 2;
-		*((unsigned short *)data) = (unsigned short)(skb->len);
-		current_tx_ptr->desc_a.start_addr = (unsigned long)data;
-		/* this is important! */
-		blackfin_dcache_flush_range(data, (data + (skb->len)) + 2);
-
+	if (ANOMALY_05000285) {
+		/*
+		 * TXDWA feature is not avaible to older revision < 0.3 silicon
+		 * of BF537
+		 *
+		 * Only if data buffer is ODD WORD alignment, we do not
+		 * need to memcpy
+		 */
+		u32 data_align = (u32)(skb->data) & 0x3;
+		if (data_align == 0x2) {
+			/* move skb->data to current_tx_ptr payload */
+			data = (u16 *)(skb->data) - 1;
+			*data = (u16)(skb->len);
+			current_tx_ptr->desc_a.start_addr = (u32)data;
+			/* this is important! */
+			blackfin_dcache_flush_range((u32)data,
+					(u32)((u8 *)data + skb->len + 4));
+		} else {
+			*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+			memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+				skb->len);
+			current_tx_ptr->desc_a.start_addr =
+				(u32)current_tx_ptr->packet;
+			if (current_tx_ptr->status.status_word != 0)
+				current_tx_ptr->status.status_word = 0;
+			blackfin_dcache_flush_range(
+				(u32)current_tx_ptr->packet,
+				(u32)(current_tx_ptr->packet + skb->len + 2));
+		}
 	} else {
-		*((unsigned short *)(current_tx_ptr->packet)) =
-		    (unsigned short)(skb->len);
-		memcpy((char *)(current_tx_ptr->packet + 2), skb->data,
-		       (skb->len));
-		current_tx_ptr->desc_a.start_addr =
-		    (unsigned long)current_tx_ptr->packet;
-		if (current_tx_ptr->status.status_word != 0)
-			current_tx_ptr->status.status_word = 0;
-		blackfin_dcache_flush_range((unsigned int)current_tx_ptr->
-					    packet,
-					    (unsigned int)(current_tx_ptr->
-							   packet + skb->len) +
-					    2);
+		/*
+		 * TXDWA feature is avaible to revision < 0.3 silicon of
+		 * BF537 and always avaible to BF52x
+		 */
+		u32 data_align = (u32)(skb->data) & 0x3;
+		if (data_align == 0x0) {
+			u16 sysctl = bfin_read_EMAC_SYSCTL();
+			sysctl |= TXDWA;
+			bfin_write_EMAC_SYSCTL(sysctl);
+
+			/* move skb->data to current_tx_ptr payload */
+			data = (u16 *)(skb->data) - 2;
+			*data = (u16)(skb->len);
+			current_tx_ptr->desc_a.start_addr = (u32)data;
+			/* this is important! */
+			blackfin_dcache_flush_range(
+					(u32)data,
+					(u32)((u8 *)data + skb->len + 4));
+		} else if (data_align == 0x2) {
+			u16 sysctl = bfin_read_EMAC_SYSCTL();
+			sysctl &= ~TXDWA;
+			bfin_write_EMAC_SYSCTL(sysctl);
+
+			/* move skb->data to current_tx_ptr payload */
+			data = (u16 *)(skb->data) - 1;
+			*data = (u16)(skb->len);
+			current_tx_ptr->desc_a.start_addr = (u32)data;
+			/* this is important! */
+			blackfin_dcache_flush_range(
+					(u32)data,
+					(u32)((u8 *)data + skb->len + 4));
+		} else {
+			u16 sysctl = bfin_read_EMAC_SYSCTL();
+			sysctl &= ~TXDWA;
+			bfin_write_EMAC_SYSCTL(sysctl);
+
+			*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+			memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+				skb->len);
+			current_tx_ptr->desc_a.start_addr =
+				(u32)current_tx_ptr->packet;
+			if (current_tx_ptr->status.status_word != 0)
+				current_tx_ptr->status.status_word = 0;
+			blackfin_dcache_flush_range(
+				(u32)current_tx_ptr->packet,
+				(u32)(current_tx_ptr->packet + skb->len + 2));
+		}
 	}
 
 	/* enable this packet's dma */
@@ -691,7 +742,6 @@ static void bfin_mac_rx(struct net_device *dev)
 					 (unsigned long)skb->tail);
 
 	dev->last_rx = jiffies;
-	skb->dev = dev;
 	skb->protocol = eth_type_trans(skb, dev);
 #if defined(BFIN_MAC_CSUM_OFFLOAD)
 	skb->csum = current_rx_ptr->status.ip_payload_csum;
@@ -920,6 +970,7 @@ static int bfin_mac_open(struct net_device *dev)
 	phy_start(lp->phydev);
 	phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
 	setup_system_regs(dev);
+	setup_mac_addr(dev->dev_addr);
 	bfin_mac_disable();
 	bfin_mac_enable();
 	pr_debug("hardware init finished\n");
@@ -955,7 +1006,7 @@ static int bfin_mac_close(struct net_device *dev)
 	return 0;
 }
 
-static int __init bfin_mac_probe(struct platform_device *pdev)
+static int __devinit bfin_mac_probe(struct platform_device *pdev)
 {
 	struct net_device *ndev;
 	struct bfin_mac_local *lp;
@@ -1081,7 +1132,7 @@ out_err_probe_mac:
 	return rc;
 }
 
-static int bfin_mac_remove(struct platform_device *pdev)
+static int __devexit bfin_mac_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct bfin_mac_local *lp = netdev_priv(ndev);
@@ -1128,7 +1179,7 @@ static int bfin_mac_resume(struct platform_device *pdev)
 
 static struct platform_driver bfin_mac_driver = {
 	.probe = bfin_mac_probe,
-	.remove = bfin_mac_remove,
+	.remove = __devexit_p(bfin_mac_remove),
 	.resume = bfin_mac_resume,
 	.suspend = bfin_mac_suspend,
 	.driver = {
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ebde67d429..2486a656f12 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -35,8 +35,8 @@
 #include <linux/time.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
-#ifdef NETIF_F_HW_VLAN_TX
 #include <linux/if_vlan.h>
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 #define BCM_VLAN 1
 #endif
 #include <net/ip.h>
@@ -57,8 +57,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.7.9"
-#define DRV_MODULE_RELDATE	"July 18, 2008"
+#define DRV_MODULE_VERSION	"1.8.0"
+#define DRV_MODULE_RELDATE	"Aug 14, 2008"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -2876,6 +2876,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		struct sw_bd *rx_buf;
 		struct sk_buff *skb;
 		dma_addr_t dma_addr;
+		u16 vtag = 0;
+		int hw_vlan __maybe_unused = 0;
 
 		sw_ring_cons = RX_RING_IDX(sw_cons);
 		sw_ring_prod = RX_RING_IDX(sw_prod);
@@ -2919,7 +2921,7 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		if (len <= bp->rx_copy_thresh) {
 			struct sk_buff *new_skb;
 
-			new_skb = netdev_alloc_skb(bp->dev, len + 2);
+			new_skb = netdev_alloc_skb(bp->dev, len + 6);
 			if (new_skb == NULL) {
 				bnx2_reuse_rx_skb(bp, rxr, skb, sw_ring_cons,
 						  sw_ring_prod);
@@ -2928,9 +2930,9 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 
 			/* aligned copy */
 			skb_copy_from_linear_data_offset(skb,
-							 BNX2_RX_OFFSET - 2,
-				      new_skb->data, len + 2);
-			skb_reserve(new_skb, 2);
+							 BNX2_RX_OFFSET - 6,
+				      new_skb->data, len + 6);
+			skb_reserve(new_skb, 6);
 			skb_put(new_skb, len);
 
 			bnx2_reuse_rx_skb(bp, rxr, skb,
@@ -2941,6 +2943,25 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 			   dma_addr, (sw_ring_cons << 16) | sw_ring_prod)))
 			goto next_rx;
 
+		if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
+		    !(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) {
+			vtag = rx_hdr->l2_fhdr_vlan_tag;
+#ifdef BCM_VLAN
+			if (bp->vlgrp)
+				hw_vlan = 1;
+			else
+#endif
+			{
+				struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
+					__skb_push(skb, 4);
+
+				memmove(ve, skb->data + 4, ETH_ALEN * 2);
+				ve->h_vlan_proto = htons(ETH_P_8021Q);
+				ve->h_vlan_TCI = htons(vtag);
+				len += 4;
+			}
+		}
+
 		skb->protocol = eth_type_trans(skb, bp->dev);
 
 		if ((len > (bp->dev->mtu + ETH_HLEN)) &&
@@ -2962,10 +2983,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		}
 
 #ifdef BCM_VLAN
-		if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && bp->vlgrp) {
-			vlan_hwaccel_receive_skb(skb, bp->vlgrp,
-				rx_hdr->l2_fhdr_vlan_tag);
-		}
+		if (hw_vlan)
+			vlan_hwaccel_receive_skb(skb, bp->vlgrp, vtag);
 		else
 #endif
 			netif_receive_skb(skb);
@@ -3237,10 +3256,10 @@ bnx2_set_rx_mode(struct net_device *dev)
 				  BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
 	sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN;
 #ifdef BCM_VLAN
-	if (!bp->vlgrp && !(bp->flags & BNX2_FLAG_ASF_ENABLE))
+	if (!bp->vlgrp && (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN))
 		rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
 #else
-	if (!(bp->flags & BNX2_FLAG_ASF_ENABLE))
+	if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
 		rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
 #endif
 	if (dev->flags & IFF_PROMISC) {
@@ -5963,10 +5982,12 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
 	}
 
+#ifdef BCM_VLAN
 	if (bp->vlgrp && vlan_tx_tag_present(skb)) {
 		vlan_tag_flags |=
 			(TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16));
 	}
+#endif
 	if ((mss = skb_shinfo(skb)->gso_size)) {
 		u32 tcp_opt_len, ip_tcp_len;
 		struct iphdr *iph;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index c3c579f98ed..dfacd31f7ed 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6597,7 +6597,7 @@ struct flash_spec {
 
 struct bnx2_irq {
 	irq_handler_t	handler;
-	u16		vector;
+	unsigned int	vector;
 	u8		requested;
 	char		name[16];
 };
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4bf4f7b205f..fd705d1295a 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -40,20 +40,20 @@
 #define DP(__mask, __fmt, __args...) do { \
 	if (bp->msglevel & (__mask)) \
 		printk(DP_LEVEL "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-			bp->dev?(bp->dev->name):"?", ##__args); \
+			bp->dev ? (bp->dev->name) : "?", ##__args); \
 	} while (0)
 
 /* errors debug print */
 #define BNX2X_DBG_ERR(__fmt, __args...) do { \
 	if (bp->msglevel & NETIF_MSG_PROBE) \
 		printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-			bp->dev?(bp->dev->name):"?", ##__args); \
+			bp->dev ? (bp->dev->name) : "?", ##__args); \
 	} while (0)
 
 /* for errors (never masked) */
 #define BNX2X_ERR(__fmt, __args...) do { \
 	printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-		bp->dev?(bp->dev->name):"?", ##__args); \
+		bp->dev ? (bp->dev->name) : "?", ##__args); \
 	} while (0)
 
 /* before we have a dev->name use dev_info() */
@@ -120,16 +120,8 @@
 #define SHMEM_RD(bp, field)		REG_RD(bp, SHMEM_ADDR(bp, field))
 #define SHMEM_WR(bp, field, val)	REG_WR(bp, SHMEM_ADDR(bp, field), val)
 
-#define NIG_WR(reg, val)	REG_WR(bp, reg, val)
-#define EMAC_WR(reg, val)	REG_WR(bp, emac_base + reg, val)
-#define BMAC_WR(reg, val)	REG_WR(bp, GRCBASE_NIG + bmac_addr + reg, val)
-
-
-#define for_each_queue(bp, var)	for (var = 0; var < bp->num_queues; var++)
-
-#define for_each_nondefault_queue(bp, var) \
-				for (var = 1; var < bp->num_queues; var++)
-#define is_multi(bp)		(bp->num_queues > 1)
+#define EMAC_RD(bp, reg)		REG_RD(bp, emac_base + reg)
+#define EMAC_WR(bp, reg, val)		REG_WR(bp, emac_base + reg, val)
 
 
 /* fast path */
@@ -159,11 +151,13 @@ struct sw_rx_page {
 #define PAGES_PER_SGE_SHIFT		0
 #define PAGES_PER_SGE			(1 << PAGES_PER_SGE_SHIFT)
 
+#define BCM_RX_ETH_PAYLOAD_ALIGN	64
+
 /* SGE ring related macros */
 #define NUM_RX_SGE_PAGES		2
 #define RX_SGE_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
 #define MAX_RX_SGE_CNT			(RX_SGE_CNT - 2)
-/* RX_SGE_CNT is promissed to be a power of 2 */
+/* RX_SGE_CNT is promised to be a power of 2 */
 #define RX_SGE_MASK			(RX_SGE_CNT - 1)
 #define NUM_RX_SGE			(RX_SGE_CNT * NUM_RX_SGE_PAGES)
 #define MAX_RX_SGE			(NUM_RX_SGE - 1)
@@ -258,8 +252,7 @@ struct bnx2x_fastpath {
 
 	unsigned long		tx_pkt,
 				rx_pkt,
-				rx_calls,
-				rx_alloc_failed;
+				rx_calls;
 	/* TPA related */
 	struct sw_rx_bd		tpa_pool[ETH_MAX_AGGREGATION_QUEUES_E1H];
 	u8			tpa_state[ETH_MAX_AGGREGATION_QUEUES_E1H];
@@ -275,6 +268,15 @@ struct bnx2x_fastpath {
 
 #define bnx2x_fp(bp, nr, var)		(bp->fp[nr].var)
 
+#define BNX2X_HAS_TX_WORK(fp) \
+			((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \
+			 (fp->tx_pkt_prod != fp->tx_pkt_cons))
+
+#define BNX2X_HAS_RX_WORK(fp) \
+			(fp->rx_comp_cons != rx_cons_sb)
+
+#define BNX2X_HAS_WORK(fp)	(BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp))
+
 
 /* MC hsi */
 #define MAX_FETCH_BD			13	/* HW max BDs per packet */
@@ -317,7 +319,7 @@ struct bnx2x_fastpath {
 #define RCQ_BD(x)			((x) & MAX_RCQ_BD)
 
 
-/* This is needed for determening of last_max */
+/* This is needed for determining of last_max */
 #define SUB_S16(a, b)			(s16)((s16)(a) - (s16)(b))
 
 #define __SGE_MASK_SET_BIT(el, bit) \
@@ -386,20 +388,28 @@ struct bnx2x_fastpath {
 #define TPA_TYPE(cqe_fp_flags)		((cqe_fp_flags) & \
 					 (TPA_TYPE_START | TPA_TYPE_END))
 
-#define BNX2X_RX_SUM_OK(cqe) \
-			(!(cqe->fast_path_cqe.status_flags & \
-			 (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG | \
-			  ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)))
+#define ETH_RX_ERROR_FALGS		ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG
+
+#define BNX2X_IP_CSUM_ERR(cqe) \
+			(!((cqe)->fast_path_cqe.status_flags & \
+			   ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG) && \
+			 ((cqe)->fast_path_cqe.type_error_flags & \
+			  ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG))
+
+#define BNX2X_L4_CSUM_ERR(cqe) \
+			(!((cqe)->fast_path_cqe.status_flags & \
+			   ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) && \
+			 ((cqe)->fast_path_cqe.type_error_flags & \
+			  ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
+
+#define BNX2X_RX_CSUM_OK(cqe) \
+			(!(BNX2X_L4_CSUM_ERR(cqe) || BNX2X_IP_CSUM_ERR(cqe)))
 
 #define BNX2X_RX_SUM_FIX(cqe) \
 			((le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) & \
 			  PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) == \
 			 (1 << PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT))
 
-#define ETH_RX_ERROR_FALGS	(ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG | \
-				 ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | \
-				 ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)
-
 
 #define FP_USB_FUNC_OFF			(2 + 2*HC_USTORM_SB_NUM_INDICES)
 #define FP_CSB_FUNC_OFF			(2 + 2*HC_CSTORM_SB_NUM_INDICES)
@@ -647,6 +657,8 @@ struct bnx2x_eth_stats {
 
 	u32 brb_drop_hi;
 	u32 brb_drop_lo;
+	u32 brb_truncate_hi;
+	u32 brb_truncate_lo;
 
 	u32 jabber_packets_received;
 
@@ -663,6 +675,9 @@ struct bnx2x_eth_stats {
 	u32 mac_discard;
 
 	u32 driver_xoff;
+	u32 rx_err_discard_pkt;
+	u32 rx_skb_alloc_failed;
+	u32 hw_csum_err;
 };
 
 #define STATS_OFFSET32(stat_name) \
@@ -737,8 +752,7 @@ struct bnx2x {
 
 	u32			rx_csum;
 	u32			rx_offset;
-	u32			rx_buf_use_size;	/* useable size */
-	u32			rx_buf_size;		/* with alignment */
+	u32			rx_buf_size;
 #define ETH_OVREHEAD			(ETH_HLEN + 8)	/* 8 for CRC + VLAN */
 #define ETH_MIN_PACKET_SIZE		60
 #define ETH_MAX_PACKET_SIZE		1500
@@ -753,7 +767,6 @@ struct bnx2x {
 	u16			def_att_idx;
 	u32			attn_state;
 	struct attn_route	attn_group[MAX_DYNAMIC_ATTN_GRPS];
-	u32			aeu_mask;
 	u32			nig_mask;
 
 	/* slow path ring */
@@ -772,7 +785,7 @@ struct bnx2x {
 	u8			stats_pending;
 	u8			set_mac_pending;
 
-	/* End of fileds used in the performance code paths */
+	/* End of fields used in the performance code paths */
 
 	int			panic;
 	int			msglevel;
@@ -794,9 +807,6 @@ struct bnx2x {
 #define BP_FUNC(bp)			(bp->func)
 #define BP_E1HVN(bp)			(bp->func >> 1)
 #define BP_L_ID(bp)			(BP_E1HVN(bp) << 2)
-/* assorted E1HVN */
-#define IS_E1HMF(bp)			(bp->e1hmf != 0)
-#define BP_MAX_QUEUES(bp)		(IS_E1HMF(bp) ? 4 : 16)
 
 	int			pm_cap;
 	int			pcie_cap;
@@ -821,6 +831,7 @@ struct bnx2x {
 	u32			mf_config;
 	u16			e1hov;
 	u8			e1hmf;
+#define IS_E1HMF(bp)			(bp->e1hmf != 0)
 
 	u8			wol;
 
@@ -836,7 +847,6 @@ struct bnx2x {
 	u16			rx_ticks_int;
 	u16			rx_ticks;
 
-	u32			stats_ticks;
 	u32			lin_cnt;
 
 	int			state;
@@ -852,6 +862,7 @@ struct bnx2x {
 #define BNX2X_STATE_ERROR		0xf000
 
 	int			num_queues;
+#define BP_MAX_QUEUES(bp)		(IS_E1HMF(bp) ? 4 : 16)
 
 	u32			rx_mode;
 #define BNX2X_RX_MODE_NONE		0
@@ -902,10 +913,17 @@ struct bnx2x {
 };
 
 
+#define for_each_queue(bp, var)	for (var = 0; var < bp->num_queues; var++)
+
+#define for_each_nondefault_queue(bp, var) \
+				for (var = 1; var < bp->num_queues; var++)
+#define is_multi(bp)		(bp->num_queues > 1)
+
+
 void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
 void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
 		      u32 len32);
-int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode);
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
 
 static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 			   int wait)
@@ -976,7 +994,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 #define PCICFG_LINK_SPEED_SHIFT		16
 
 
-#define BNX2X_NUM_STATS			39
+#define BNX2X_NUM_STATS			42
 #define BNX2X_NUM_TESTS			8
 
 #define BNX2X_MAC_LOOPBACK		0
@@ -1007,10 +1025,10 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 /* resolution of the rate shaping timer - 100 usec */
 #define RS_PERIODIC_TIMEOUT_USEC	100
 /* resolution of fairness algorithm in usecs -
-   coefficient for clauclating the actuall t fair */
+   coefficient for calculating the actual t fair */
 #define T_FAIR_COEF			10000000
 /* number of bytes in single QM arbitration cycle -
-   coeffiecnt for calculating the fairness timer */
+   coefficient for calculating the fairness timer */
 #define QM_ARB_BYTES			40000
 #define FAIR_MEM			2
 
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index e3da7f69d27..192fa981b93 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -9,165 +9,171 @@
 
 
 #define CSTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0x7000 : 0x1000)
+	(IS_E1H_OFFSET ? 0x7000 : 0x1000)
 #define CSTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0x7020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0x7020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define CSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0x8522 + ((function>>1) * 0x40) + ((function&1) \
-	* 0x100) + (index * 0x4)) : (0x1922 + (function * 0x40) + (index \
-	* 0x4)))
+	(IS_E1H_OFFSET ? (0x8522 + ((function>>1) * 0x40) + \
+	((function&1) * 0x100) + (index * 0x4)) : (0x1922 + (function * \
+	0x40) + (index * 0x4)))
 #define CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x8500 + ((function>>1) * 0x40) + ((function&1) \
-	* 0x100)) : (0x1900 + (function * 0x40)))
+	(IS_E1H_OFFSET ? (0x8500 + ((function>>1) * 0x40) + \
+	((function&1) * 0x100)) : (0x1900 + (function * 0x40)))
 #define CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x8508 + ((function>>1) * 0x40) + ((function&1) \
-	* 0x100)) : (0x1908 + (function * 0x40)))
+	(IS_E1H_OFFSET ? (0x8508 + ((function>>1) * 0x40) + \
+	((function&1) * 0x100)) : (0x1908 + (function * 0x40)))
 #define CSTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x11e8 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x11e8 : 0xffffffff)
 #define CSTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0x8704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
+	(IS_E1H_OFFSET ? (0x8704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
 #define CSTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x801a + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x801a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define CSTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x8018 + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x8018 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define CSTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x8000 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x8000 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1400 + (port * 0x280) + (cpu_id * 0x28)))
 #define CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x8008 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x8008 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1408 + (port * 0x280) + (cpu_id * 0x28)))
 #define CSTORM_STATS_FLAGS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x1108 + (function * 0x8)) : (0x5108 + \
+	(IS_E1H_OFFSET ? (0x1108 + (function * 0x8)) : (0x5108 + \
 	(function * 0x8)))
 #define TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x31c0 + (function * 0x20)) : 0xffffffff)
+	(IS_E1H_OFFSET ? (0x31c0 + (function * 0x20)) : 0xffffffff)
 #define TSTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0xa000 : 0x1000)
+	(IS_E1H_OFFSET ? 0xa000 : 0x1000)
 #define TSTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0xa020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0xa020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) \
-	(IS_E1H_OFFSET? (0x3358 + (port * 0x3e8) + (client_id * 0x28)) : \
-	(0x9c8 + (port * 0x2f8) + (client_id * 0x28)))
+	(IS_E1H_OFFSET ? (0x3358 + (port * 0x3e8) + (client_id * 0x28)) \
+	: (0x9c8 + (port * 0x2f8) + (client_id * 0x28)))
 #define TSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0xb01a + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0) + (index * 0x4)) : (0x141a + (function * 0x28) + (index * \
-	0x4)))
+	(IS_E1H_OFFSET ? (0xb01a + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0) + (index * 0x4)) : (0x141a + (function * \
+	0x28) + (index * 0x4)))
 #define TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xb000 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1400 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xb000 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1400 + (function * 0x28)))
 #define TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xb008 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1408 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xb008 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1408 + (function * 0x28)))
 #define TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2b80 + (function * 0x8)) : (0x4b68 + \
+	(IS_E1H_OFFSET ? (0x2b80 + (function * 0x8)) : (0x4b68 + \
 	(function * 0x8)))
 #define TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x3000 + (function * 0x38)) : (0x1500 + \
+	(IS_E1H_OFFSET ? (0x3000 + (function * 0x38)) : (0x1500 + \
 	(function * 0x38)))
 #define TSTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x1ad0 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x1ad0 : 0xffffffff)
 #define TSTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0xb144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+	(IS_E1H_OFFSET ? (0xb144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
 #define TSTORM_INDIRECTION_TABLE_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x12c8 + (function * 0x80)) : (0x22c8 + \
+	(IS_E1H_OFFSET ? (0x12c8 + (function * 0x80)) : (0x22c8 + \
 	(function * 0x80)))
 #define TSTORM_INDIRECTION_TABLE_SIZE 0x80
 #define TSTORM_MAC_FILTER_CONFIG_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x3008 + (function * 0x38)) : (0x1508 + \
+	(IS_E1H_OFFSET ? (0x3008 + (function * 0x38)) : (0x1508 + \
 	(function * 0x38)))
+#define TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
+	(IS_E1H_OFFSET ? (0x2010 + (port * 0x5b0) + (stats_counter_id * \
+	0x50)) : (0x4000 + (port * 0x3f0) + (stats_counter_id * 0x38)))
 #define TSTORM_RX_PRODS_OFFSET(port, client_id) \
-	(IS_E1H_OFFSET? (0x3350 + (port * 0x3e8) + (client_id * 0x28)) : \
-	(0x9c0 + (port * 0x2f8) + (client_id * 0x28)))
+	(IS_E1H_OFFSET ? (0x3350 + (port * 0x3e8) + (client_id * 0x28)) \
+	: (0x9c0 + (port * 0x2f8) + (client_id * 0x28)))
 #define TSTORM_STATS_FLAGS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2c00 + (function * 0x8)) : (0x4b88 + \
+	(IS_E1H_OFFSET ? (0x2c00 + (function * 0x8)) : (0x4b88 + \
 	(function * 0x8)))
-#define TSTORM_TPA_EXIST_OFFSET (IS_E1H_OFFSET? 0x3b30 : 0x1c20)
-#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET? 0xa040 : 0x2c10)
-#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET? 0x2440 : 0x1200)
+#define TSTORM_TPA_EXIST_OFFSET (IS_E1H_OFFSET ? 0x3b30 : 0x1c20)
+#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET ? 0xa040 : 0x2c10)
+#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET ? 0x2440 : 0x1200)
 #define USTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0x8000 : 0x1000)
+	(IS_E1H_OFFSET ? 0x8000 : 0x1000)
 #define USTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0x8020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0x8020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define USTORM_CQE_PAGE_BASE_OFFSET(port, clientId) \
-	(IS_E1H_OFFSET? (0x3298 + (port * 0x258) + (clientId * 0x18)) : \
+	(IS_E1H_OFFSET ? (0x3298 + (port * 0x258) + (clientId * 0x18)) : \
 	(0x5450 + (port * 0x1c8) + (clientId * 0x18)))
 #define USTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0x951a + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0) + (index * 0x4)) : (0x191a + (function * 0x28) + (index * \
-	0x4)))
+	(IS_E1H_OFFSET ? (0x951a + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0) + (index * 0x4)) : (0x191a + (function * \
+	0x28) + (index * 0x4)))
 #define USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x9500 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1900 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0x9500 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1900 + (function * 0x28)))
 #define USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x9508 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1908 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0x9508 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1908 + (function * 0x28)))
 #define USTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x2448 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x2448 : 0xffffffff)
 #define USTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0x9644 + (port * 0xd0)) : (0x1954 + (port * 0xb8)))
+	(IS_E1H_OFFSET ? (0x9644 + (port * 0xd0)) : (0x1954 + (port * 0xb8)))
 #define USTORM_MAX_AGG_SIZE_OFFSET(port, clientId) \
-	(IS_E1H_OFFSET? (0x3290 + (port * 0x258) + (clientId * 0x18)) : \
+	(IS_E1H_OFFSET ? (0x3290 + (port * 0x258) + (clientId * 0x18)) : \
 	(0x5448 + (port * 0x1c8) + (clientId * 0x18)))
 #define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2408 + (function * 0x8)) : (0x5408 + \
+	(IS_E1H_OFFSET ? (0x2408 + (function * 0x8)) : (0x5408 + \
 	(function * 0x8)))
 #define USTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x901a + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x901a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define USTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x9018 + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x9018 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define USTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x9000 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x9000 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1400 + (port * 0x280) + (cpu_id * 0x28)))
 #define USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x9008 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x9008 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1408 + (port * 0x280) + (cpu_id * 0x28)))
 #define XSTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0x9000 : 0x1000)
+	(IS_E1H_OFFSET ? 0x9000 : 0x1000)
 #define XSTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0x9020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0x9020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) \
-	(IS_E1H_OFFSET? (0x24a8 + (port * 0x40)) : (0x3ba0 + (port * 0x40)))
+	(IS_E1H_OFFSET ? (0x24a8 + (port * 0x40)) : (0x3ba0 + (port * 0x40)))
 #define XSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0xa01a + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0) + (index * 0x4)) : (0x141a + (function * 0x28) + (index * \
-	0x4)))
+	(IS_E1H_OFFSET ? (0xa01a + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0) + (index * 0x4)) : (0x141a + (function * \
+	0x28) + (index * 0x4)))
 #define XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xa000 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1400 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xa000 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1400 + (function * 0x28)))
 #define XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xa008 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1408 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xa008 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1408 + (function * 0x28)))
 #define XSTORM_E1HOV_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2ab8 + (function * 0x2)) : 0xffffffff)
+	(IS_E1H_OFFSET ? (0x2ab8 + (function * 0x2)) : 0xffffffff)
 #define XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2418 + (function * 0x8)) : (0x3b70 + \
+	(IS_E1H_OFFSET ? (0x2418 + (function * 0x8)) : (0x3b70 + \
 	(function * 0x8)))
 #define XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2568 + (function * 0x70)) : (0x3c60 + \
+	(IS_E1H_OFFSET ? (0x2568 + (function * 0x70)) : (0x3c60 + \
 	(function * 0x70)))
 #define XSTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x2ac8 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x2ac8 : 0xffffffff)
 #define XSTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0xa144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+	(IS_E1H_OFFSET ? (0xa144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+#define XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
+	(IS_E1H_OFFSET ? (0xc000 + (port * 0x3f0) + (stats_counter_id * \
+	0x38)) : (0x3378 + (port * 0x3f0) + (stats_counter_id * 0x38)))
 #define XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2528 + (function * 0x70)) : (0x3c20 + \
+	(IS_E1H_OFFSET ? (0x2528 + (function * 0x70)) : (0x3c20 + \
 	(function * 0x70)))
 #define XSTORM_SPQ_PAGE_BASE_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2000 + (function * 0x10)) : (0x3328 + \
+	(IS_E1H_OFFSET ? (0x2000 + (function * 0x10)) : (0x3328 + \
 	(function * 0x10)))
 #define XSTORM_SPQ_PROD_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2008 + (function * 0x10)) : (0x3330 + \
+	(IS_E1H_OFFSET ? (0x2008 + (function * 0x10)) : (0x3330 + \
 	(function * 0x10)))
 #define XSTORM_STATS_FLAGS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x23d8 + (function * 0x8)) : (0x3b60 + \
+	(IS_E1H_OFFSET ? (0x23d8 + (function * 0x8)) : (0x3b60 + \
 	(function * 0x8)))
 #define COMMON_ASM_INVALID_ASSERT_OPCODE 0x0
 
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index d3e8198d7db..efd764427fa 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -1268,7 +1268,7 @@ struct doorbell {
 
 
 /*
- * IGU driver acknowlegement register
+ * IGU driver acknowledgement register
  */
 struct igu_ack_register {
 #if defined(__BIG_ENDIAN)
@@ -1882,7 +1882,7 @@ struct timers_block_context {
 };
 
 /*
- * structure for easy accessability to assembler
+ * structure for easy accessibility to assembler
  */
 struct eth_tx_bd_flags {
 	u8 as_bitfield;
@@ -2044,7 +2044,7 @@ struct eth_context {
 
 
 /*
- * ethernet doorbell
+ * Ethernet doorbell
  */
 struct eth_tx_doorbell {
 #if defined(__BIG_ENDIAN)
@@ -2256,7 +2256,7 @@ struct ramrod_data {
 };
 
 /*
- * union for ramrod data for ethernet protocol (CQE) (force size of 16 bits)
+ * union for ramrod data for Ethernet protocol (CQE) (force size of 16 bits)
  */
 union eth_ramrod_data {
 	struct ramrod_data general;
@@ -2330,7 +2330,7 @@ struct spe_hdr {
 };
 
 /*
- * ethernet slow path element
+ * Ethernet slow path element
  */
 union eth_specific_data {
 	u8 protocol_data[8];
@@ -2343,7 +2343,7 @@ union eth_specific_data {
 };
 
 /*
- * ethernet slow path element
+ * Ethernet slow path element
  */
 struct eth_spe {
 	struct spe_hdr hdr;
@@ -2615,7 +2615,7 @@ struct tstorm_eth_rx_producers {
 
 
 /*
- * common flag to indicate existance of TPA.
+ * common flag to indicate existence of TPA.
  */
 struct tstorm_eth_tpa_exist {
 #if defined(__BIG_ENDIAN)
@@ -2765,7 +2765,7 @@ struct tstorm_common_stats {
 };
 
 /*
- * Eth statistics query sturcture for the eth_stats_quesry ramrod
+ * Eth statistics query structure for the eth_stats_query ramrod
  */
 struct eth_stats_query {
 	struct xstorm_common_stats xstorm_common;
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 4c7750789b6..130927cfc75 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -72,26 +72,26 @@
 
 
 struct raw_op {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 raw_data;
 };
 
 struct op_read {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 pad;
 };
 
 struct op_write {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 val;
 };
 
 struct op_string_write {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 #ifdef __LITTLE_ENDIAN
 	u16 data_off;
 	u16 data_len;
@@ -102,8 +102,8 @@ struct op_string_write {
 };
 
 struct op_zero {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 len;
 };
 
@@ -208,7 +208,7 @@ static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
 /*********************************************************
    There are different blobs for each PRAM section.
    In addition, each blob write operation is divided into a few operations
-   in order to decrease the amount of phys. contigious buffer needed.
+   in order to decrease the amount of phys. contiguous buffer needed.
    Thus, when we select a blob the address may be with some offset
    from the beginning of PRAM section.
    The same holds for the INT_TABLE sections.
@@ -336,7 +336,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)
 		len = op->str_wr.data_len;
 		data = data_base + op->str_wr.data_off;
 
-		/* carefull! it must be in order */
+		/* careful! it must be in order */
 		if (unlikely(op_type > OP_WB)) {
 
 			/* If E1 only */
@@ -740,7 +740,7 @@ static u8 calc_crc8(u32 data, u8 crc)
 	return crc_res;
 }
 
-/* regiesers addresses are not in order
+/* registers addresses are not in order
    so these arrays help simplify the code */
 static const int cm_start[E1H_FUNC_MAX][9] = {
 	{MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,
diff --git a/drivers/net/bnx2x_init_values.h b/drivers/net/bnx2x_init_values.h
index 63019055e4b..9755bf6b08d 100644
--- a/drivers/net/bnx2x_init_values.h
+++ b/drivers/net/bnx2x_init_values.h
@@ -901,31 +901,28 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3760, 0x4},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1e20, 0x42},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3738, 0x9},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3000, 0x400},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b68, 0x2},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x3738 + 0x24, 0x10293},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c00, 0x2},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x4b68 + 0x8, 0x20278},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3180, 0x42},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2c00 + 0x8, 0x20278},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b10, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x400},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b68, 0x2},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2830, 0x2027a},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4000, 0x2},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x4b68 + 0x8, 0x2027a},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x4000 + 0x8, 0x20294},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b10, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b68, 0x2},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2830, 0x2027c},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x6b68 + 0x8, 0x20296},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b10, 0x2},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x74c0, 0x20298},
 	{OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c00, 0x10027e},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c00, 0x10027c},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c00, 0x10029a},
 	{OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c40, 0x10028e},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c40, 0x10028c},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c40, 0x1002aa},
 	{OP_ZP_E1, USEM_REG_INT_TABLE, 0xc20000},
 	{OP_ZP_E1H, USEM_REG_INT_TABLE, 0xc40000},
-	{OP_WR_64_E1, USEM_REG_INT_TABLE + 0x368, 0x13029e},
+	{OP_WR_64_E1, USEM_REG_INT_TABLE + 0x368, 0x13029c},
 	{OP_WR_64_E1H, USEM_REG_INT_TABLE + 0x368, 0x1302ba},
 	{OP_ZP_E1, USEM_REG_PRAM, 0x311c0000},
 	{OP_ZP_E1H, USEM_REG_PRAM, 0x31070000},
@@ -933,11 +930,11 @@ static const struct raw_op init_ops[] = {
 	{OP_ZP_E1H, USEM_REG_PRAM + 0x8000, 0x330e0c42},
 	{OP_ZP_E1, USEM_REG_PRAM + 0x10000, 0x38561919},
 	{OP_ZP_E1H, USEM_REG_PRAM + 0x10000, 0x389b1906},
-	{OP_WR_64_E1, USEM_REG_PRAM + 0x17fe0, 0x500402a0},
+	{OP_WR_64_E1, USEM_REG_PRAM + 0x17fe0, 0x5004029e},
 	{OP_ZP_E1H, USEM_REG_PRAM + 0x18000, 0x132272d},
 	{OP_WR_64_E1H, USEM_REG_PRAM + 0x18250, 0x4fb602bc},
-#define USEM_COMMON_END         790
-#define USEM_PORT0_START        790
+#define USEM_COMMON_END         787
+#define USEM_PORT0_START        787
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1400, 0xa0},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9000, 0xa0},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1900, 0xa},
@@ -950,44 +947,27 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3288, 0x96},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5440, 0x72},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3000, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b78, 0x52},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5100, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3100, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e08, 0xc},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5200, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3200, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5300, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3300, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5400, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3400, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5500, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3500, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5600, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3600, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5700, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3700, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5800, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3800, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5900, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3900, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3a00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3b00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3c00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3d00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3e00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3f00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b78, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c10, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e08, 0xc},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b78, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e08, 0xc},
-#define USEM_PORT0_END          838
-#define USEM_PORT1_START        838
+#define USEM_PORT0_END          818
+#define USEM_PORT1_START        818
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1680, 0xa0},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9280, 0xa0},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1928, 0xa},
@@ -1000,76 +980,59 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x34e0, 0x96},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5608, 0x72},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5080, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3080, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4cc0, 0x52},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5180, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3180, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e38, 0xc},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5280, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3280, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5380, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3380, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5480, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3480, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5580, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3580, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5680, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3680, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5780, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3780, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5880, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3880, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5980, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3980, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3a80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3b80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3c80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3d80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3e80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3f80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6cc0, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c20, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e38, 0xc},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4cc0, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e38, 0xc},
-#define USEM_PORT1_END          886
-#define USEM_FUNC0_START        886
+#define USEM_PORT1_END          849
+#define USEM_FUNC0_START        849
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3000, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4010, 0x2},
-#define USEM_FUNC0_END          888
-#define USEM_FUNC1_START        888
+#define USEM_FUNC0_END          851
+#define USEM_FUNC1_START        851
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3010, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4020, 0x2},
-#define USEM_FUNC1_END          890
-#define USEM_FUNC2_START        890
+#define USEM_FUNC1_END          853
+#define USEM_FUNC2_START        853
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3020, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4030, 0x2},
-#define USEM_FUNC2_END          892
-#define USEM_FUNC3_START        892
+#define USEM_FUNC2_END          855
+#define USEM_FUNC3_START        855
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3030, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4040, 0x2},
-#define USEM_FUNC3_END          894
-#define USEM_FUNC4_START        894
+#define USEM_FUNC3_END          857
+#define USEM_FUNC4_START        857
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3040, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4050, 0x2},
-#define USEM_FUNC4_END          896
-#define USEM_FUNC5_START        896
+#define USEM_FUNC4_END          859
+#define USEM_FUNC5_START        859
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3050, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4060, 0x2},
-#define USEM_FUNC5_END          898
-#define USEM_FUNC6_START        898
+#define USEM_FUNC5_END          861
+#define USEM_FUNC6_START        861
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3060, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4070, 0x2},
-#define USEM_FUNC6_END          900
-#define USEM_FUNC7_START        900
+#define USEM_FUNC6_END          863
+#define USEM_FUNC7_START        863
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3070, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4080, 0x2},
-#define USEM_FUNC7_END          902
-#define CSEM_COMMON_START       902
+#define USEM_FUNC7_END          865
+#define CSEM_COMMON_START       865
 	{OP_RD, CSEM_REG_MSG_NUM_FIC0, 0x0},
 	{OP_RD, CSEM_REG_MSG_NUM_FIC1, 0x0},
 	{OP_RD, CSEM_REG_MSG_NUM_FOC0, 0x0},
@@ -1128,29 +1091,29 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x11e8, 0x0},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x25c0, 0x240},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3000, 0xc0},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x2ec8, 0x802a2},
+	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x2ec8, 0x802a0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x4070, 0x80},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x5280, 0x4},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6280, 0x240},
 	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x6b88, 0x2002be},
 	{OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x13fffff},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002aa},
+	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002a8},
 	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002de},
 	{OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002ba},
+	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002b8},
 	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002ee},
 	{OP_ZP_E1, CSEM_REG_INT_TABLE, 0x6e0000},
 	{OP_ZP_E1H, CSEM_REG_INT_TABLE, 0x6f0000},
-	{OP_WR_64_E1, CSEM_REG_INT_TABLE + 0x380, 0x1002ca},
+	{OP_WR_64_E1, CSEM_REG_INT_TABLE + 0x380, 0x1002c8},
 	{OP_WR_64_E1H, CSEM_REG_INT_TABLE + 0x380, 0x1002fe},
 	{OP_ZP_E1, CSEM_REG_PRAM, 0x32580000},
 	{OP_ZP_E1H, CSEM_REG_PRAM, 0x31fa0000},
 	{OP_ZP_E1, CSEM_REG_PRAM + 0x8000, 0x18270c96},
 	{OP_ZP_E1H, CSEM_REG_PRAM + 0x8000, 0x19040c7f},
-	{OP_WR_64_E1, CSEM_REG_PRAM + 0xb210, 0x682402cc},
+	{OP_WR_64_E1, CSEM_REG_PRAM + 0xb210, 0x682402ca},
 	{OP_WR_64_E1H, CSEM_REG_PRAM + 0xb430, 0x67e00300},
-#define CSEM_COMMON_END         981
-#define CSEM_PORT0_START        981
+#define CSEM_COMMON_END         944
+#define CSEM_PORT0_START        944
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1400, 0xa0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8000, 0xa0},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1900, 0x10},
@@ -1163,8 +1126,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6040, 0x30},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3040, 0x6},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2410, 0x30},
-#define CSEM_PORT0_END          993
-#define CSEM_PORT1_START        993
+#define CSEM_PORT0_END          956
+#define CSEM_PORT1_START        956
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1680, 0xa0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8280, 0xa0},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1940, 0x10},
@@ -1177,43 +1140,43 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6100, 0x30},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3058, 0x6},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x24d0, 0x30},
-#define CSEM_PORT1_END          1005
-#define CSEM_FUNC0_START        1005
+#define CSEM_PORT1_END          968
+#define CSEM_FUNC0_START        968
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1148, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3300, 0x2},
-#define CSEM_FUNC0_END          1007
-#define CSEM_FUNC1_START        1007
+#define CSEM_FUNC0_END          970
+#define CSEM_FUNC1_START        970
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x114c, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3308, 0x2},
-#define CSEM_FUNC1_END          1009
-#define CSEM_FUNC2_START        1009
+#define CSEM_FUNC1_END          972
+#define CSEM_FUNC2_START        972
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1150, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3310, 0x2},
-#define CSEM_FUNC2_END          1011
-#define CSEM_FUNC3_START        1011
+#define CSEM_FUNC2_END          974
+#define CSEM_FUNC3_START        974
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1154, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3318, 0x2},
-#define CSEM_FUNC3_END          1013
-#define CSEM_FUNC4_START        1013
+#define CSEM_FUNC3_END          976
+#define CSEM_FUNC4_START        976
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1158, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3320, 0x2},
-#define CSEM_FUNC4_END          1015
-#define CSEM_FUNC5_START        1015
+#define CSEM_FUNC4_END          978
+#define CSEM_FUNC5_START        978
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x115c, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3328, 0x2},
-#define CSEM_FUNC5_END          1017
-#define CSEM_FUNC6_START        1017
+#define CSEM_FUNC5_END          980
+#define CSEM_FUNC6_START        980
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1160, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3330, 0x2},
-#define CSEM_FUNC6_END          1019
-#define CSEM_FUNC7_START        1019
+#define CSEM_FUNC6_END          982
+#define CSEM_FUNC7_START        982
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1164, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3338, 0x2},
-#define CSEM_FUNC7_END          1021
-#define XPB_COMMON_START        1021
+#define CSEM_FUNC7_END          984
+#define XPB_COMMON_START        984
 	{OP_WR, GRCBASE_XPB + PB_REG_CONTROL, 0x20},
-#define XPB_COMMON_END          1022
-#define DQ_COMMON_START         1022
+#define XPB_COMMON_END          985
+#define DQ_COMMON_START         985
 	{OP_WR, DORQ_REG_MODE_ACT, 0x2},
 	{OP_WR, DORQ_REG_NORM_CID_OFST, 0x3},
 	{OP_WR, DORQ_REG_OUTST_REQ, 0x4},
@@ -1232,8 +1195,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, DORQ_REG_DQ_FIFO_AFULL_TH, 0x76c},
 	{OP_WR, DORQ_REG_REGN, 0x7c1004},
 	{OP_WR, DORQ_REG_IF_EN, 0xf},
-#define DQ_COMMON_END           1040
-#define TIMERS_COMMON_START     1040
+#define DQ_COMMON_END           1003
+#define TIMERS_COMMON_START     1003
 	{OP_ZR, TM_REG_CLIN_PRIOR0_CLIENT, 0x2},
 	{OP_WR, TM_REG_LIN_SETCLR_FIFO_ALFULL_THR, 0x1c},
 	{OP_WR, TM_REG_CFC_AC_CRDCNT_VAL, 0x1},
@@ -1256,14 +1219,14 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, TM_REG_EN_CL0_INPUT, 0x1},
 	{OP_WR, TM_REG_EN_CL1_INPUT, 0x1},
 	{OP_WR, TM_REG_EN_CL2_INPUT, 0x1},
-#define TIMERS_COMMON_END       1062
-#define TIMERS_PORT0_START      1062
+#define TIMERS_COMMON_END       1025
+#define TIMERS_PORT0_START      1025
 	{OP_ZR, TM_REG_LIN0_PHY_ADDR, 0x2},
-#define TIMERS_PORT0_END        1063
-#define TIMERS_PORT1_START      1063
+#define TIMERS_PORT0_END        1026
+#define TIMERS_PORT1_START      1026
 	{OP_ZR, TM_REG_LIN1_PHY_ADDR, 0x2},
-#define TIMERS_PORT1_END        1064
-#define XSDM_COMMON_START       1064
+#define TIMERS_PORT1_END        1027
+#define XSDM_COMMON_START       1027
 	{OP_WR_E1, XSDM_REG_CFC_RSP_START_ADDR, 0x614},
 	{OP_WR_E1H, XSDM_REG_CFC_RSP_START_ADDR, 0x424},
 	{OP_WR_E1, XSDM_REG_CMP_COUNTER_START_ADDR, 0x600},
@@ -1311,8 +1274,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_ASIC, XSDM_REG_TIMER_TICK, 0x3e8},
 	{OP_WR_EMUL, XSDM_REG_TIMER_TICK, 0x1},
 	{OP_WR_FPGA, XSDM_REG_TIMER_TICK, 0xa},
-#define XSDM_COMMON_END         1111
-#define QM_COMMON_START         1111
+#define XSDM_COMMON_END         1074
+#define QM_COMMON_START         1074
 	{OP_WR, QM_REG_ACTCTRINITVAL_0, 0x6},
 	{OP_WR, QM_REG_ACTCTRINITVAL_1, 0x5},
 	{OP_WR, QM_REG_ACTCTRINITVAL_2, 0xa},
@@ -1613,8 +1576,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_6, 0x5},
 	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_7, 0x7},
 	{OP_WR, QM_REG_CMINTEN, 0xff},
-#define QM_COMMON_END           1411
-#define PBF_COMMON_START        1411
+#define QM_COMMON_END           1374
+#define PBF_COMMON_START        1374
 	{OP_WR, PBF_REG_INIT, 0x1},
 	{OP_WR, PBF_REG_INIT_P4, 0x1},
 	{OP_WR, PBF_REG_MAC_LB_ENABLE, 0x1},
@@ -1622,20 +1585,20 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, PBF_REG_INIT_P4, 0x0},
 	{OP_WR, PBF_REG_INIT, 0x0},
 	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P4, 0x0},
-#define PBF_COMMON_END          1418
-#define PBF_PORT0_START         1418
+#define PBF_COMMON_END          1381
+#define PBF_PORT0_START         1381
 	{OP_WR, PBF_REG_INIT_P0, 0x1},
 	{OP_WR, PBF_REG_MAC_IF0_ENABLE, 0x1},
 	{OP_WR, PBF_REG_INIT_P0, 0x0},
 	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P0, 0x0},
-#define PBF_PORT0_END           1422
-#define PBF_PORT1_START         1422
+#define PBF_PORT0_END           1385
+#define PBF_PORT1_START         1385
 	{OP_WR, PBF_REG_INIT_P1, 0x1},
 	{OP_WR, PBF_REG_MAC_IF1_ENABLE, 0x1},
 	{OP_WR, PBF_REG_INIT_P1, 0x0},
 	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P1, 0x0},
-#define PBF_PORT1_END           1426
-#define XCM_COMMON_START        1426
+#define PBF_PORT1_END           1389
+#define XCM_COMMON_START        1389
 	{OP_WR, XCM_REG_XX_OVFL_EVNT_ID, 0x32},
 	{OP_WR, XCM_REG_XQM_XCM_HDR_P, 0x3150020},
 	{OP_WR, XCM_REG_XQM_XCM_HDR_S, 0x3150020},
@@ -1670,7 +1633,7 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, XCM_REG_XX_MSG_NUM, 0x1f},
 	{OP_WR_E1H, XCM_REG_XX_MSG_NUM, 0x20},
 	{OP_ZR, XCM_REG_XX_TABLE, 0x12},
-	{OP_SW_E1, XCM_REG_XX_DESCR_TABLE, 0x1f02ce},
+	{OP_SW_E1, XCM_REG_XX_DESCR_TABLE, 0x1f02cc},
 	{OP_SW_E1H, XCM_REG_XX_DESCR_TABLE, 0x1f0302},
 	{OP_WR, XCM_REG_N_SM_CTX_LD_0, 0xf},
 	{OP_WR, XCM_REG_N_SM_CTX_LD_1, 0x7},
@@ -1700,8 +1663,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, XCM_REG_CDU_SM_WR_IFEN, 0x1},
 	{OP_WR, XCM_REG_CDU_SM_RD_IFEN, 0x1},
 	{OP_WR, XCM_REG_XCM_CFC_IFEN, 0x1},
-#define XCM_COMMON_END          1490
-#define XCM_PORT0_START         1490
+#define XCM_COMMON_END          1453
+#define XCM_PORT0_START         1453
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1710,8 +1673,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD10, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-#define XCM_PORT0_END           1498
-#define XCM_PORT1_START         1498
+#define XCM_PORT0_END           1461
+#define XCM_PORT1_START         1461
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1720,8 +1683,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD11, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-#define XCM_PORT1_END           1506
-#define XCM_FUNC0_START         1506
+#define XCM_PORT1_END           1469
+#define XCM_FUNC0_START         1469
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1731,8 +1694,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC0_END           1515
-#define XCM_FUNC1_START         1515
+#define XCM_FUNC0_END           1478
+#define XCM_FUNC1_START         1478
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1742,8 +1705,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC1_END           1524
-#define XCM_FUNC2_START         1524
+#define XCM_FUNC1_END           1487
+#define XCM_FUNC2_START         1487
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1753,8 +1716,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC2_END           1533
-#define XCM_FUNC3_START         1533
+#define XCM_FUNC2_END           1496
+#define XCM_FUNC3_START         1496
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1764,8 +1727,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC3_END           1542
-#define XCM_FUNC4_START         1542
+#define XCM_FUNC3_END           1505
+#define XCM_FUNC4_START         1505
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1775,8 +1738,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC4_END           1551
-#define XCM_FUNC5_START         1551
+#define XCM_FUNC4_END           1514
+#define XCM_FUNC5_START         1514
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1786,8 +1749,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC5_END           1560
-#define XCM_FUNC6_START         1560
+#define XCM_FUNC5_END           1523
+#define XCM_FUNC6_START         1523
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1797,8 +1760,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC6_END           1569
-#define XCM_FUNC7_START         1569
+#define XCM_FUNC6_END           1532
+#define XCM_FUNC7_START         1532
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1808,8 +1771,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC7_END           1578
-#define XSEM_COMMON_START       1578
+#define XCM_FUNC7_END           1541
+#define XSEM_COMMON_START       1541
 	{OP_RD, XSEM_REG_MSG_NUM_FIC0, 0x0},
 	{OP_RD, XSEM_REG_MSG_NUM_FIC1, 0x0},
 	{OP_RD, XSEM_REG_MSG_NUM_FOC0, 0x0},
@@ -1876,9 +1839,9 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x9000, 0x2},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3368, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x21a8, 0x86},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3370, 0x202ed},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3370, 0x202eb},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2000, 0x20},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3b90, 0x402ef},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3b90, 0x402ed},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x23c8, 0x0},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1518, 0x1},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x23d0, 0x20321},
@@ -1886,29 +1849,29 @@ static const struct raw_op init_ops[] = {
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2498, 0x40323},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1838, 0x0},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2ac8, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1820, 0x202f3},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1820, 0x202f1},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2ab8, 0x0},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4ac0, 0x2},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x3010, 0x1},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b00, 0x4},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x4040, 0x10},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1f50, 0x202f5},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1f50, 0x202f3},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x4000, 0x100327},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6ac0, 0x2},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b00, 0x4},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x83b0, 0x20337},
 	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c00, 0x1002f7},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c00, 0x1002f5},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c00, 0x100339},
 	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80307},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80305},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80349},
 	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x2000000},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c60, 0x8030f},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c60, 0x8030d},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c60, 0x80351},
 	{OP_ZP_E1, XSEM_REG_INT_TABLE, 0xa90000},
 	{OP_ZP_E1H, XSEM_REG_INT_TABLE, 0xac0000},
-	{OP_WR_64_E1, XSEM_REG_INT_TABLE + 0x368, 0x130317},
+	{OP_WR_64_E1, XSEM_REG_INT_TABLE + 0x368, 0x130315},
 	{OP_WR_64_E1H, XSEM_REG_INT_TABLE + 0x368, 0x130359},
 	{OP_ZP_E1, XSEM_REG_PRAM, 0x344e0000},
 	{OP_ZP_E1H, XSEM_REG_PRAM, 0x34620000},
@@ -1918,10 +1881,10 @@ static const struct raw_op init_ops[] = {
 	{OP_ZP_E1H, XSEM_REG_PRAM + 0x10000, 0x3e971b22},
 	{OP_ZP_E1, XSEM_REG_PRAM + 0x18000, 0x1dd02ad2},
 	{OP_ZP_E1H, XSEM_REG_PRAM + 0x18000, 0x21542ac8},
-	{OP_WR_64_E1, XSEM_REG_PRAM + 0x1c0d0, 0x47e60319},
+	{OP_WR_64_E1, XSEM_REG_PRAM + 0x1c0d0, 0x47e60317},
 	{OP_WR_64_E1H, XSEM_REG_PRAM + 0x1c8d0, 0x46e6035b},
-#define XSEM_COMMON_END         1688
-#define XSEM_PORT0_START        1688
+#define XSEM_COMMON_END         1651
+#define XSEM_PORT0_START        1651
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3ba0, 0x10},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc000, 0xfc},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3c20, 0x1c},
@@ -1934,7 +1897,7 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x26e8, 0x1c},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b58, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x27c8, 0x1c},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d10, 0x10031b},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d10, 0x100319},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa000, 0x28},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1500, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa140, 0xc},
@@ -1950,12 +1913,12 @@ static const struct raw_op init_ops[] = {
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ac8, 0x2035d},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50b8, 0x1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b10, 0x42},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ac8, 0x2032b},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ac8, 0x20329},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d20, 0x4},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b10, 0x42},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d20, 0x4},
-#define XSEM_PORT0_END          1720
-#define XSEM_PORT1_START        1720
+#define XSEM_PORT0_END          1683
+#define XSEM_PORT1_START        1683
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3be0, 0x10},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc3f0, 0xfc},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3c90, 0x1c},
@@ -1968,7 +1931,7 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2758, 0x1c},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b5c, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2838, 0x1c},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d50, 0x10032d},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d50, 0x10032b},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa0a0, 0x28},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1504, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa170, 0xc},
@@ -1984,65 +1947,65 @@ static const struct raw_op init_ops[] = {
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ad0, 0x2035f},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50bc, 0x1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6c18, 0x42},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ad0, 0x2033d},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ad0, 0x2033b},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d30, 0x4},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4c18, 0x42},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d30, 0x4},
-#define XSEM_PORT1_END          1752
-#define XSEM_FUNC0_START        1752
+#define XSEM_PORT1_END          1715
+#define XSEM_FUNC0_START        1715
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e0, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x28b8, 0x100361},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5048, 0xe},
-#define XSEM_FUNC0_END          1755
-#define XSEM_FUNC1_START        1755
+#define XSEM_FUNC0_END          1718
+#define XSEM_FUNC1_START        1718
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e4, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x28f8, 0x100371},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5080, 0xe},
-#define XSEM_FUNC1_END          1758
-#define XSEM_FUNC2_START        1758
+#define XSEM_FUNC1_END          1721
+#define XSEM_FUNC2_START        1721
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e8, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2938, 0x100381},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50b8, 0xe},
-#define XSEM_FUNC2_END          1761
-#define XSEM_FUNC3_START        1761
+#define XSEM_FUNC2_END          1724
+#define XSEM_FUNC3_START        1724
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7ec, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2978, 0x100391},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50f0, 0xe},
-#define XSEM_FUNC3_END          1764
-#define XSEM_FUNC4_START        1764
+#define XSEM_FUNC3_END          1727
+#define XSEM_FUNC4_START        1727
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f0, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29b8, 0x1003a1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5128, 0xe},
-#define XSEM_FUNC4_END          1767
-#define XSEM_FUNC5_START        1767
+#define XSEM_FUNC4_END          1730
+#define XSEM_FUNC5_START        1730
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f4, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29f8, 0x1003b1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5160, 0xe},
-#define XSEM_FUNC5_END          1770
-#define XSEM_FUNC6_START        1770
+#define XSEM_FUNC5_END          1733
+#define XSEM_FUNC6_START        1733
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f8, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a38, 0x1003c1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5198, 0xe},
-#define XSEM_FUNC6_END          1773
-#define XSEM_FUNC7_START        1773
+#define XSEM_FUNC6_END          1736
+#define XSEM_FUNC7_START        1736
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7fc, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a78, 0x1003d1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x51d0, 0xe},
-#define XSEM_FUNC7_END          1776
-#define CDU_COMMON_START        1776
+#define XSEM_FUNC7_END          1739
+#define CDU_COMMON_START        1739
 	{OP_WR, CDU_REG_CDU_CONTROL0, 0x1},
 	{OP_WR_E1H, CDU_REG_MF_MODE, 0x1},
 	{OP_WR, CDU_REG_CDU_CHK_MASK0, 0x3d000},
 	{OP_WR, CDU_REG_CDU_CHK_MASK1, 0x3d},
-	{OP_WB_E1, CDU_REG_L1TT, 0x200033f},
+	{OP_WB_E1, CDU_REG_L1TT, 0x200033d},
 	{OP_WB_E1H, CDU_REG_L1TT, 0x20003e1},
-	{OP_WB_E1, CDU_REG_MATT, 0x20053f},
+	{OP_WB_E1, CDU_REG_MATT, 0x20053d},
 	{OP_WB_E1H, CDU_REG_MATT, 0x2805e1},
 	{OP_ZR_E1, CDU_REG_MATT + 0x80, 0x2},
-	{OP_WB_E1, CDU_REG_MATT + 0x88, 0x6055f},
+	{OP_WB_E1, CDU_REG_MATT + 0x88, 0x6055d},
 	{OP_ZR, CDU_REG_MATT + 0xa0, 0x18},
-#define CDU_COMMON_END          1787
-#define DMAE_COMMON_START       1787
+#define CDU_COMMON_END          1750
+#define DMAE_COMMON_START       1750
 	{OP_ZR, DMAE_REG_CMD_MEM, 0xe0},
 	{OP_WR, DMAE_REG_CRC16C_INIT, 0x0},
 	{OP_WR, DMAE_REG_CRC16T10_INIT, 0x1},
@@ -2050,24 +2013,24 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, DMAE_REG_PXP_REQ_INIT_CRD, 0x2},
 	{OP_WR, DMAE_REG_PCI_IFEN, 0x1},
 	{OP_WR, DMAE_REG_GRC_IFEN, 0x1},
-#define DMAE_COMMON_END         1794
-#define PXP_COMMON_START        1794
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x400, 0x50565},
+#define DMAE_COMMON_END         1757
+#define PXP_COMMON_START        1757
+	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x400, 0x50563},
 	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT + 0x400, 0x50609},
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x420, 0x5056a},
+	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x420, 0x50568},
 	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT, 0x5060e},
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT, 0x5056f},
-#define PXP_COMMON_END          1799
-#define CFC_COMMON_START        1799
+	{OP_WB_E1, PXP_REG_HST_INBOUND_INT, 0x5056d},
+#define PXP_COMMON_END          1762
+#define CFC_COMMON_START        1762
 	{OP_ZR_E1H, CFC_REG_LINK_LIST, 0x100},
 	{OP_WR, CFC_REG_CONTROL0, 0x10},
 	{OP_WR, CFC_REG_DISABLE_ON_ERROR, 0x3fff},
 	{OP_WR, CFC_REG_LCREQ_WEIGHTS, 0x84924a},
-#define CFC_COMMON_END          1803
-#define HC_COMMON_START         1803
+#define CFC_COMMON_END          1766
+#define HC_COMMON_START         1766
 	{OP_ZR_E1, HC_REG_USTORM_ADDR_FOR_COALESCE, 0x4},
-#define HC_COMMON_END           1804
-#define HC_PORT0_START          1804
+#define HC_COMMON_END           1767
+#define HC_PORT0_START          1767
 	{OP_WR_E1, HC_REG_CONFIG_0, 0x1080},
 	{OP_ZR_E1, HC_REG_UC_RAM_ADDR_0, 0x2},
 	{OP_WR_E1, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2086,8 +2049,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_PORT0_END            1822
-#define HC_PORT1_START          1822
+#define HC_PORT0_END            1785
+#define HC_PORT1_START          1785
 	{OP_WR_E1, HC_REG_CONFIG_1, 0x1080},
 	{OP_ZR_E1, HC_REG_UC_RAM_ADDR_1, 0x2},
 	{OP_WR_E1, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2106,8 +2069,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_PORT1_END            1840
-#define HC_FUNC0_START          1840
+#define HC_PORT1_END            1803
+#define HC_FUNC0_START          1803
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x0},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2123,8 +2086,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC0_END            1855
-#define HC_FUNC1_START          1855
+#define HC_FUNC0_END            1818
+#define HC_FUNC1_START          1818
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x1},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2140,8 +2103,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC1_END            1870
-#define HC_FUNC2_START          1870
+#define HC_FUNC1_END            1833
+#define HC_FUNC2_START          1833
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x2},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2157,8 +2120,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC2_END            1885
-#define HC_FUNC3_START          1885
+#define HC_FUNC2_END            1848
+#define HC_FUNC3_START          1848
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x3},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2174,8 +2137,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC3_END            1900
-#define HC_FUNC4_START          1900
+#define HC_FUNC3_END            1863
+#define HC_FUNC4_START          1863
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x4},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2191,8 +2154,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC4_END            1915
-#define HC_FUNC5_START          1915
+#define HC_FUNC4_END            1878
+#define HC_FUNC5_START          1878
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x5},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2208,8 +2171,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC5_END            1930
-#define HC_FUNC6_START          1930
+#define HC_FUNC5_END            1893
+#define HC_FUNC6_START          1893
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x6},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2225,8 +2188,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC6_END            1945
-#define HC_FUNC7_START          1945
+#define HC_FUNC6_END            1908
+#define HC_FUNC7_START          1908
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x7},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2242,8 +2205,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC7_END            1960
-#define PXP2_COMMON_START       1960
+#define HC_FUNC7_END            1923
+#define PXP2_COMMON_START       1923
 	{OP_WR_E1, PXP2_REG_PGL_CONTROL0, 0xe38340},
 	{OP_WR_E1H, PXP2_REG_RQ_DRAM_ALIGN, 0x1},
 	{OP_WR, PXP2_REG_PGL_CONTROL1, 0x3c10},
@@ -2361,8 +2324,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, PXP2_REG_RQ_ILT_MODE, 0x1},
 	{OP_WR, PXP2_REG_RQ_RBC_DONE, 0x1},
 	{OP_WR_E1H, PXP2_REG_PGL_CONTROL0, 0xe38340},
-#define PXP2_COMMON_END         2077
-#define MISC_AEU_COMMON_START   2077
+#define PXP2_COMMON_END         2040
+#define MISC_AEU_COMMON_START   2040
 	{OP_ZR, MISC_REG_AEU_GENERAL_ATTN_0, 0x16},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_NIG_0, 0x55540000},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_NIG_0, 0x55555555},
@@ -2382,8 +2345,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_PXP_1, 0x0},
 	{OP_WR_E1H, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0xc00},
 	{OP_WR_E1H, MISC_REG_AEU_GENERAL_MASK, 0x3},
-#define MISC_AEU_COMMON_END     2096
-#define MISC_AEU_PORT0_START    2096
+#define MISC_AEU_COMMON_END     2059
+#define MISC_AEU_PORT0_START    2059
 	{OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xbf5c0000},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xff5c0000},
 	{OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0, 0xfff51fef},
@@ -2416,8 +2379,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_0, 0x0},
 	{OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_0, 0x3},
 	{OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_0, 0x7},
-#define MISC_AEU_PORT0_END      2128
-#define MISC_AEU_PORT1_START    2128
+#define MISC_AEU_PORT0_END      2091
+#define MISC_AEU_PORT1_START    2091
 	{OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xbf5c0000},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xff5c0000},
 	{OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0, 0xfff51fef},
@@ -2450,7 +2413,7 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_1, 0x0},
 	{OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_1, 0x3},
 	{OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_1, 0x7},
-#define MISC_AEU_PORT1_END      2160
+#define MISC_AEU_PORT1_END      2123
 
 };
 
@@ -2560,103 +2523,92 @@ static const u32 init_data_e1[] = {
 	0x00049c00, 0x00051f80, 0x0005a300, 0x00062680, 0x0006aa00, 0x00072d80,
 	0x0007b100, 0x00083480, 0x0008b800, 0x00093b80, 0x0009bf00, 0x000a4280,
 	0x000ac600, 0x000b4980, 0x000bcd00, 0x000c5080, 0x000cd400, 0x000d5780,
-	0x000ddb00, 0x00001900, 0x00000028, 0x00000000, 0x00100000, 0x00000000,
-	0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
+	0x000ddb00, 0x00001900, 0x00100000, 0x00000000, 0x00000000, 0xffffffff,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8,
-	0x00000000, 0x00001500, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
+	0x40000000, 0x40000000, 0x00000000, 0x00007ff8, 0x00000000, 0x00001500,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x00000000, 0x00007ff8, 0x00000000, 0x00003500, 0x00001000, 0x00002080,
-	0x00003100, 0x00004180, 0x00005200, 0x00006280, 0x00007300, 0x00008380,
-	0x00009400, 0x0000a480, 0x0000b500, 0x0000c580, 0x0000d600, 0x0000e680,
-	0x0000f700, 0x00010780, 0x00011800, 0x00012880, 0x00013900, 0x00014980,
-	0x00015a00, 0x00016a80, 0x00017b00, 0x00018b80, 0x00019c00, 0x0001ac80,
-	0x0001bd00, 0x0001cd80, 0x0001de00, 0x0001ee80, 0x0001ff00, 0x00000000,
-	0x00010001, 0x00000604, 0xccccccc1, 0xffffffff, 0xffffffff, 0xcccc0201,
-	0xcccccccc, 0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000,
+	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8,
+	0x00000000, 0x00003500, 0x00001000, 0x00002080, 0x00003100, 0x00004180,
+	0x00005200, 0x00006280, 0x00007300, 0x00008380, 0x00009400, 0x0000a480,
+	0x0000b500, 0x0000c580, 0x0000d600, 0x0000e680, 0x0000f700, 0x00010780,
+	0x00011800, 0x00012880, 0x00013900, 0x00014980, 0x00015a00, 0x00016a80,
+	0x00017b00, 0x00018b80, 0x00019c00, 0x0001ac80, 0x0001bd00, 0x0001cd80,
+	0x0001de00, 0x0001ee80, 0x0001ff00, 0x00000000, 0x00010001, 0x00000604,
+	0xccccccc1, 0xffffffff, 0xffffffff, 0xcccc0201, 0xcccccccc, 0x00000000,
+	0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000,
-	0x00007ff8, 0x00000000, 0x00003500, 0x0000ffff, 0x00000000, 0x0000ffff,
+	0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8, 0x00000000,
+	0x00003500, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
 	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
+	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x00100000,
 	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x00100000, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
 	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x00100000, 0x00000000, 0xfffffff3, 0x320fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
-	0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
-	0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
-	0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
-	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7, 0x31efffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
-	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0xfffffff3, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c,
+	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x00100000,
+	0x00000000, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x30efffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6,
 	0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c,
 	0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014,
 	0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa,
 	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c,
-	0xcdcdcdcd, 0xfffffff7, 0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x304fffff, 0x0c30c30c,
+	0xcdcdcdcd, 0xfffffff7, 0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x302fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3,
-	0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
+	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
 	0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
 	0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
 	0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97,
-	0x056fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x320fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7,
+	0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c,
+	0xcdcdcdcd, 0xfffffff5, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x31efffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
 	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
 	0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
 	0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
 	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xffffff8a, 0x042fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x05cfffff, 0x0c30c30c,
+	0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x056fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
 	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0xfffffff3, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x300fffff, 0x0c30c30c,
+	0xcdcdcdcd, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6,
 	0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c,
 	0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014,
 	0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa,
-	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c,
-	0xcdcdcdcd, 0xffffff97, 0x040fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
-	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x300fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffff8a,
+	0x042fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0010cf3c,
+	0xcdcdcdcd, 0xffffff97, 0x05cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
+	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3,
+	0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
+	0xcdcdcdcd, 0xfffffff1, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
+	0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
+	0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97,
+	0x040fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c,
+	0xcdcdcdcd, 0xfffffff5, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xffffffff,
 	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c,
@@ -2678,16 +2630,27 @@ static const u32 init_data_e1[] = {
 	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c,
 	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
 	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0x00100000,
-	0x00070100, 0x00028170, 0x000b8198, 0x00020250, 0x00010270, 0x000f0280,
-	0x00010370, 0x00080000, 0x00080080, 0x00028100, 0x000b8128, 0x000201e0,
-	0x00010200, 0x00070210, 0x00020280, 0x000f0000, 0x000800f0, 0x00028170,
-	0x000b8198, 0x00020250, 0x00010270, 0x000b8280, 0x00080338, 0x00100000,
-	0x00080100, 0x00028180, 0x000b81a8, 0x00020260, 0x00018280, 0x000e8298,
-	0x00080380, 0x00028000, 0x000b8028, 0x000200e0, 0x00010100, 0x00008110,
-	0x00000118, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000,
-	0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc,
-	0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000
+	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff,
+	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c,
+	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff,
+	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c,
+	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff,
+	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c,
+	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0x00100000, 0x00070100, 0x00028170,
+	0x000b8198, 0x00020250, 0x00010270, 0x000f0280, 0x00010370, 0x00080000,
+	0x00080080, 0x00028100, 0x000b8128, 0x000201e0, 0x00010200, 0x00070210,
+	0x00020280, 0x000f0000, 0x000800f0, 0x00028170, 0x000b8198, 0x00020250,
+	0x00010270, 0x000b8280, 0x00080338, 0x00100000, 0x00080100, 0x00028180,
+	0x000b81a8, 0x00020260, 0x00018280, 0x000e8298, 0x00080380, 0x00028000,
+	0x000b8028, 0x000200e0, 0x00010100, 0x00008110, 0x00000118, 0xcccccccc,
+	0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc, 0xcccccccc,
+	0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc, 0xcccccccc, 0xcccccccc,
+	0xcccccccc, 0x00002000
 };
 
 static const u32 init_data_e1h[] = {
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index ff2743db10d..4ce7fe9c525 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -21,7 +21,6 @@
 #include <linux/delay.h>
 #include <linux/ethtool.h>
 #include <linux/mutex.h>
-#include <linux/version.h>
 
 #include "bnx2x_reg.h"
 #include "bnx2x_fw_defs.h"
@@ -31,17 +30,16 @@
 
 /********************************************************/
 #define SUPPORT_CL73 0 /* Currently no */
-#define ETH_HLEN 			14
+#define ETH_HLEN			14
 #define ETH_OVREHEAD		(ETH_HLEN + 8)/* 8 for CRC + VLAN*/
 #define ETH_MIN_PACKET_SIZE		60
 #define ETH_MAX_PACKET_SIZE		1500
 #define ETH_MAX_JUMBO_PACKET_SIZE	9600
 #define MDIO_ACCESS_TIMEOUT		1000
 #define BMAC_CONTROL_RX_ENABLE	2
-#define MAX_MTU_SIZE		5000
 
 /***********************************************************/
-/*                       Shortcut definitions              */
+/*			Shortcut definitions		   */
 /***********************************************************/
 
 #define NIG_STATUS_XGXS0_LINK10G \
@@ -80,12 +78,12 @@
 
 #define AUTONEG_CL37		SHARED_HW_CFG_AN_ENABLE_CL37
 #define AUTONEG_CL73		SHARED_HW_CFG_AN_ENABLE_CL73
-#define AUTONEG_BAM			SHARED_HW_CFG_AN_ENABLE_BAM
-#define AUTONEG_PARALLEL		\
+#define AUTONEG_BAM 		SHARED_HW_CFG_AN_ENABLE_BAM
+#define AUTONEG_PARALLEL \
 				SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION
-#define AUTONEG_SGMII_FIBER_AUTODET	\
+#define AUTONEG_SGMII_FIBER_AUTODET \
 				SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT
-#define AUTONEG_REMOTE_PHY		SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
+#define AUTONEG_REMOTE_PHY	SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
 
 #define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \
 			MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE
@@ -202,11 +200,10 @@ static void bnx2x_emac_init(struct link_params *params,
 	/* init emac - use read-modify-write */
 	/* self clear reset */
 	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
-	EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
+	EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
 
 	timeout = 200;
-	do
-	{
+	do {
 		val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
 		DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
 		if (!timeout) {
@@ -214,18 +211,18 @@ static void bnx2x_emac_init(struct link_params *params,
 			return;
 		}
 		timeout--;
-	}while (val & EMAC_MODE_RESET);
+	} while (val & EMAC_MODE_RESET);
 
 	/* Set mac address */
 	val = ((params->mac_addr[0] << 8) |
 		params->mac_addr[1]);
-	EMAC_WR(EMAC_REG_EMAC_MAC_MATCH, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val);
 
 	val = ((params->mac_addr[2] << 24) |
 	       (params->mac_addr[3] << 16) |
 	       (params->mac_addr[4] << 8) |
 		params->mac_addr[5]);
-	EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val);
 }
 
 static u8 bnx2x_emac_enable(struct link_params *params,
@@ -286,7 +283,7 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 	if (CHIP_REV_IS_SLOW(bp)) {
 		/* config GMII mode */
 		val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
-		EMAC_WR(EMAC_REG_EMAC_MODE,
+		EMAC_WR(bp, EMAC_REG_EMAC_MODE,
 			    (val | EMAC_MODE_PORT_GMII));
 	} else { /* ASIC */
 		/* pause enable/disable */
@@ -298,17 +295,19 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 				    EMAC_RX_MODE_FLOW_EN);
 
 		bnx2x_bits_dis(bp,  emac_base + EMAC_REG_EMAC_TX_MODE,
-			       EMAC_TX_MODE_EXT_PAUSE_EN);
+			     (EMAC_TX_MODE_EXT_PAUSE_EN |
+			      EMAC_TX_MODE_FLOW_EN));
 		if (vars->flow_ctrl & FLOW_CTRL_TX)
 			bnx2x_bits_en(bp, emac_base +
 				    EMAC_REG_EMAC_TX_MODE,
-				      EMAC_TX_MODE_EXT_PAUSE_EN);
+				   (EMAC_TX_MODE_EXT_PAUSE_EN |
+				    EMAC_TX_MODE_FLOW_EN));
 	}
 
 	/* KEEP_VLAN_TAG, promiscuous */
 	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
 	val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
-	EMAC_WR(EMAC_REG_EMAC_RX_MODE, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val);
 
 	/* Set Loopback */
 	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
@@ -316,10 +315,10 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 		val |= 0x810;
 	else
 		val &= ~0x810;
-	EMAC_WR(EMAC_REG_EMAC_MODE, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
 
 	/* enable emac for jumbo packets */
-	EMAC_WR(EMAC_REG_EMAC_RX_MTU_SIZE,
+	EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
 		(EMAC_RX_MTU_SIZE_JUMBO_ENA |
 		 (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)));
 
@@ -591,9 +590,9 @@ void bnx2x_link_status_update(struct link_params *params,
 			vars->flow_ctrl &= ~FLOW_CTRL_RX;
 
 		if (vars->phy_flags & PHY_XGXS_FLAG) {
-			if (params->req_line_speed &&
-			    ((params->req_line_speed == SPEED_10) ||
-			     (params->req_line_speed == SPEED_100))) {
+			if (vars->line_speed &&
+			    ((vars->line_speed == SPEED_10) ||
+			     (vars->line_speed == SPEED_100))) {
 				vars->phy_flags |= PHY_SGMII_FLAG;
 			} else {
 				vars->phy_flags &= ~PHY_SGMII_FLAG;
@@ -645,7 +644,7 @@ static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port)
 	u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
 		NIG_REG_INGRESS_BMAC0_MEM;
 	u32 wb_data[2];
-    u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
+	u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
 
 	/* Only if the bmac is out of reset */
 	if (REG_RD(bp, MISC_REG_RESET_REG_2) &
@@ -670,7 +669,6 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
 	u8 port = params->port;
 	u32 init_crd, crd;
 	u32 count = 1000;
-	u32 pause = 0;
 
 	/* disable port */
 	REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
@@ -693,33 +691,25 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
 		return -EINVAL;
 	}
 
-	if (flow_ctrl & FLOW_CTRL_RX)
-		pause = 1;
-	REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, pause);
-	if (pause) {
+	if (flow_ctrl & FLOW_CTRL_RX ||
+	    line_speed == SPEED_10 ||
+	    line_speed == SPEED_100 ||
+	    line_speed == SPEED_1000 ||
+	    line_speed == SPEED_2500) {
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1);
 		/* update threshold */
 		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0);
 		/* update init credit */
-		init_crd = 778;		/* (800-18-4) */
+		init_crd = 778; 	/* (800-18-4) */
 
 	} else {
 		u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE +
 			      ETH_OVREHEAD)/16;
-
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
 		/* update threshold */
 		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh);
 		/* update init credit */
 		switch (line_speed) {
-		case SPEED_10:
-		case SPEED_100:
-		case SPEED_1000:
-			init_crd = thresh + 55 - 22;
-			break;
-
-		case SPEED_2500:
-			init_crd = thresh + 138 - 22;
-			break;
-
 		case SPEED_10000:
 			init_crd = thresh + 553 - 22;
 			break;
@@ -764,10 +754,10 @@ static u32 bnx2x_get_emac_base(u32 ext_phy_type, u8 port)
 		emac_base = GRCBASE_EMAC0;
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
-		emac_base = (port) ? GRCBASE_EMAC0: GRCBASE_EMAC1;
+		emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
 		break;
 	default:
-		emac_base = (port) ? GRCBASE_EMAC1: GRCBASE_EMAC0;
+		emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 		break;
 	}
 	return emac_base;
@@ -1044,7 +1034,7 @@ static void bnx2x_set_swap_lanes(struct link_params *params)
 }
 
 static void bnx2x_set_parallel_detection(struct link_params *params,
-				       u8                phy_flags)
+				       u8       	 phy_flags)
 {
 	struct bnx2x *bp = params->bp;
 	u16 control2;
@@ -1114,7 +1104,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
 
 	/* CL37 Autoneg Enabled */
-	if (params->req_line_speed == SPEED_AUTO_NEG)
+	if (vars->line_speed == SPEED_AUTO_NEG)
 		reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
 	else /* CL37 Autoneg Disabled */
 		reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
@@ -1132,7 +1122,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      MDIO_REG_BANK_SERDES_DIGITAL,
 			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &reg_val);
 	reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN;
-	if (params->req_line_speed == SPEED_AUTO_NEG)
+	if (vars->line_speed == SPEED_AUTO_NEG)
 		reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
 	else
 		reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
@@ -1148,7 +1138,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      MDIO_REG_BANK_BAM_NEXT_PAGE,
 			      MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
 			  &reg_val);
-	if (params->req_line_speed == SPEED_AUTO_NEG) {
+	if (vars->line_speed == SPEED_AUTO_NEG) {
 		/* Enable BAM aneg Mode and TetonII aneg Mode */
 		reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
 			    MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
@@ -1164,7 +1154,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      reg_val);
 
 	/* Enable Clause 73 Aneg */
-	if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+	if ((vars->line_speed == SPEED_AUTO_NEG) &&
 	    (SUPPORT_CL73)) {
 		/* Enable BAM Station Manager */
 
@@ -1226,7 +1216,8 @@ static void bnx2x_set_autoneg(struct link_params *params,
 }
 
 /* program SerDes, forced speed */
-static void bnx2x_program_serdes(struct link_params *params)
+static void bnx2x_program_serdes(struct link_params *params,
+			       struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u16 reg_val;
@@ -1248,28 +1239,35 @@ static void bnx2x_program_serdes(struct link_params *params)
 
 	/* program speed
 	   - needed only if the speed is greater than 1G (2.5G or 10G) */
-	if (!((params->req_line_speed == SPEED_1000) ||
-	      (params->req_line_speed == SPEED_100) ||
-	      (params->req_line_speed == SPEED_10))) {
-		CL45_RD_OVER_CL22(bp, params->port,
+	CL45_RD_OVER_CL22(bp, params->port,
 				      params->phy_addr,
 				      MDIO_REG_BANK_SERDES_DIGITAL,
 				      MDIO_SERDES_DIGITAL_MISC1, &reg_val);
-		/* clearing the speed value before setting the right speed */
-		reg_val &= ~MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK;
+	/* clearing the speed value before setting the right speed */
+	DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val);
+
+	reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK |
+		     MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
+
+	if (!((vars->line_speed == SPEED_1000) ||
+	      (vars->line_speed == SPEED_100) ||
+	      (vars->line_speed == SPEED_10))) {
+
 		reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M |
 			    MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
-		if (params->req_line_speed == SPEED_10000)
+		if (vars->line_speed == SPEED_10000)
 			reg_val |=
 				MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
-		if (params->req_line_speed == SPEED_13000)
+		if (vars->line_speed == SPEED_13000)
 			reg_val |=
 				MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G;
-		CL45_WR_OVER_CL22(bp, params->port,
+	}
+
+	CL45_WR_OVER_CL22(bp, params->port,
 				      params->phy_addr,
 				      MDIO_REG_BANK_SERDES_DIGITAL,
 				      MDIO_SERDES_DIGITAL_MISC1, reg_val);
-	}
+
 }
 
 static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
@@ -1295,48 +1293,49 @@ static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
 			      MDIO_OVER_1G_UP3, 0);
 }
 
-static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
-					   u32 *ieee_fc)
+static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
 {
-	struct bnx2x *bp = params->bp;
-	/* for AN, we are always publishing full duplex */
-	u16 an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
-
+	*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
 	/* resolve pause mode and advertisement
 	 * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
 
 	switch (params->req_flow_ctrl) {
 	case FLOW_CTRL_AUTO:
-		if (params->mtu <= MAX_MTU_SIZE) {
-			an_adv |=
+		if (params->req_fc_auto_adv == FLOW_CTRL_BOTH) {
+			*ieee_fc |=
 			     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
 		} else {
-			an_adv |=
+			*ieee_fc |=
 		       MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
 		}
 		break;
 	case FLOW_CTRL_TX:
-		an_adv |=
+		*ieee_fc |=
 		       MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
 		break;
 
 	case FLOW_CTRL_RX:
 	case FLOW_CTRL_BOTH:
-		an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
 		break;
 
 	case FLOW_CTRL_NONE:
 	default:
-		an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
 		break;
 	}
+}
 
-	*ieee_fc = an_adv;
+static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
+					   u32 ieee_fc)
+{
+	struct bnx2x *bp = params->bp;
+	/* for AN, we are always publishing full duplex */
 
 	CL45_WR_OVER_CL22(bp, params->port,
 			      params->phy_addr,
 			      MDIO_REG_BANK_COMBO_IEEE0,
-			      MDIO_COMBO_IEEE0_AUTO_NEG_ADV, an_adv);
+			      MDIO_COMBO_IEEE0_AUTO_NEG_ADV, (u16)ieee_fc);
 }
 
 static void bnx2x_restart_autoneg(struct link_params *params)
@@ -1382,7 +1381,8 @@ static void bnx2x_restart_autoneg(struct link_params *params)
 	}
 }
 
-static void bnx2x_initialize_sgmii_process(struct link_params *params)
+static void bnx2x_initialize_sgmii_process(struct link_params *params,
+					 struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u16 control1;
@@ -1406,7 +1406,7 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
 			      control1);
 
 	/* if forced speed */
-	if (!(params->req_line_speed == SPEED_AUTO_NEG)) {
+	if (!(vars->line_speed == SPEED_AUTO_NEG)) {
 		/* set speed, disable autoneg */
 		u16 mii_control;
 
@@ -1419,7 +1419,7 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
 				 MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK|
 				 MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);
 
-		switch (params->req_line_speed) {
+		switch (vars->line_speed) {
 		case SPEED_100:
 			mii_control |=
 				MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
@@ -1433,8 +1433,8 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
 			break;
 		default:
 			/* invalid speed for SGMII */
-			DP(NETIF_MSG_LINK, "Invalid req_line_speed 0x%x\n",
-				  params->req_line_speed);
+			DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
+				  vars->line_speed);
 			break;
 		}
 
@@ -1460,20 +1460,20 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
  */
 
 static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
-{
-	switch (pause_result) {			/* ASYM P ASYM P */
-	case 0xb:				/*   1  0   1  1 */
+{						/*  LD	    LP	 */
+	switch (pause_result) { 		/* ASYM P ASYM P */
+	case 0xb:       			/*   1  0   1  1 */
 		vars->flow_ctrl = FLOW_CTRL_TX;
 		break;
 
-	case 0xe:				/*   1  1   1  0 */
+	case 0xe:       			/*   1  1   1  0 */
 		vars->flow_ctrl = FLOW_CTRL_RX;
 		break;
 
-	case 0x5:				/*   0  1   0  1 */
-	case 0x7:				/*   0  1   1  1 */
-	case 0xd:				/*   1  1   0  1 */
-	case 0xf:				/*   1  1   1  1 */
+	case 0x5:       			/*   0  1   0  1 */
+	case 0x7:       			/*   0  1   1  1 */
+	case 0xd:       			/*   1  1   0  1 */
+	case 0xf:       			/*   1  1   1  1 */
 		vars->flow_ctrl = FLOW_CTRL_BOTH;
 		break;
 
@@ -1531,6 +1531,28 @@ static u8 bnx2x_ext_phy_resove_fc(struct link_params *params,
 		DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
 		   pause_result);
 		bnx2x_pause_resolve(vars, pause_result);
+		if (vars->flow_ctrl == FLOW_CTRL_NONE &&
+		     ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+			bnx2x_cl45_read(bp, port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD,
+				      MDIO_AN_REG_CL37_FC_LD, &ld_pause);
+
+			bnx2x_cl45_read(bp, port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD,
+				      MDIO_AN_REG_CL37_FC_LP, &lp_pause);
+			pause_result = (ld_pause &
+				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5;
+			pause_result |= (lp_pause &
+				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
+
+			bnx2x_pause_resolve(vars, pause_result);
+			DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x \n",
+				 pause_result);
+		}
 	}
 	return ret;
 }
@@ -1541,8 +1563,8 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
 				  u32 gp_status)
 {
 	struct bnx2x *bp = params->bp;
-	u16 ld_pause;	/* local driver */
-	u16 lp_pause;	/* link partner */
+	u16 ld_pause;   /* local driver */
+	u16 lp_pause;   /* link partner */
 	u16 pause_result;
 
 	vars->flow_ctrl = FLOW_CTRL_NONE;
@@ -1573,13 +1595,10 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
 		   (bnx2x_ext_phy_resove_fc(params, vars))) {
 		return;
 	} else {
-		vars->flow_ctrl = params->req_flow_ctrl;
-		if (vars->flow_ctrl == FLOW_CTRL_AUTO) {
-			if (params->mtu <= MAX_MTU_SIZE)
-				vars->flow_ctrl = FLOW_CTRL_BOTH;
-			else
-				vars->flow_ctrl = FLOW_CTRL_TX;
-		}
+		if (params->req_flow_ctrl == FLOW_CTRL_AUTO)
+			vars->flow_ctrl = params->req_fc_auto_adv;
+		else
+			vars->flow_ctrl = params->req_flow_ctrl;
 	}
 	DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl);
 }
@@ -1590,6 +1609,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 				      u32 gp_status)
 {
 	struct bnx2x *bp = params->bp;
+
 	u8 rc = 0;
 	vars->link_status = 0;
 
@@ -1690,7 +1710,11 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 
 		vars->link_status |= LINK_STATUS_SERDES_LINK;
 
-		if (params->req_line_speed == SPEED_AUTO_NEG) {
+		if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+		    ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
+		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705))) {
 			vars->autoneg = AUTO_NEG_ENABLED;
 
 			if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
@@ -1705,18 +1729,18 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 
 		}
 		if (vars->flow_ctrl & FLOW_CTRL_TX)
-		       vars->link_status |=
-			LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
+			vars->link_status |=
+				LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
 
 		if (vars->flow_ctrl & FLOW_CTRL_RX)
-		       vars->link_status |=
-			LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
+			vars->link_status |=
+				LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
 
 	} else { /* link_down */
 		DP(NETIF_MSG_LINK, "phy link down\n");
 
 		vars->phy_link_up = 0;
-		vars->line_speed = 0;
+
 		vars->duplex = DUPLEX_FULL;
 		vars->flow_ctrl = FLOW_CTRL_NONE;
 		vars->autoneg = AUTO_NEG_DISABLED;
@@ -1817,15 +1841,15 @@ static u8 bnx2x_emac_program(struct link_params *params,
 }
 
 /*****************************************************************************/
-/*                           External Phy section                            */
+/*      		     External Phy section       		     */
 /*****************************************************************************/
-static void bnx2x_hw_reset(struct bnx2x *bp)
+static void bnx2x_hw_reset(struct bnx2x *bp, u8 port)
 {
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-		       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+		       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
 	msleep(1);
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-		      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+		      MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
 }
 
 static void bnx2x_ext_phy_reset(struct link_params *params,
@@ -1854,10 +1878,11 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			/* HW reset */
-			bnx2x_hw_reset(bp);
+			bnx2x_hw_reset(bp, params->port);
 
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
@@ -1869,7 +1894,8 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 			/* Unset Low Power Mode and SW reset */
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			DP(NETIF_MSG_LINK, "XGXS 8072\n");
 			bnx2x_cl45_write(bp, params->port,
@@ -1887,19 +1913,14 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			DP(NETIF_MSG_LINK, "XGXS 8073\n");
-			bnx2x_cl45_write(bp,
-				       params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_CTRL,
-				       1<<15);
 			}
 			break;
 
@@ -1908,10 +1929,11 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			/* HW reset */
-			bnx2x_hw_reset(bp);
+			bnx2x_hw_reset(bp, params->port);
 
 			break;
 
@@ -1934,7 +1956,7 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
 			DP(NETIF_MSG_LINK, "SerDes 5482\n");
-			bnx2x_hw_reset(bp);
+			bnx2x_hw_reset(bp, params->port);
 			break;
 
 		default:
@@ -2098,42 +2120,45 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
 
 }
 
-static void bnx2x_bcm8073_external_rom_boot(struct link_params *params)
+static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port,
+					  u8 ext_phy_addr)
 {
-	struct bnx2x *bp = params->bp;
-	u8 port = params->port;
-	u8 ext_phy_addr = ((params->ext_phy_config &
-			     PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-			    PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
-	u16 fw_ver1, fw_ver2, val;
-	/* Need to wait 100ms after reset */
-	msleep(100);
-	/* Boot port from external ROM	*/
+	u16 fw_ver1, fw_ver2;
+	/* Boot port from external ROM  */
 	/* EDC grst */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       0x0001);
 
 	/* ucode reboot and rst */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       0x008c);
 
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_MISC_CTRL1, 0x0001);
 
 	/* Reset internal microprocessor */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
 
 	/* Release srst bit */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
@@ -2142,35 +2167,52 @@ static void bnx2x_bcm8073_external_rom_boot(struct link_params *params)
 	msleep(100);
 
 	/* Clear ser_boot_ctl bit */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_MISC_CTRL1, 0x0000);
 
-	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_ROM_VER1, &fw_ver1);
-	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_ROM_VER2, &fw_ver2);
+	bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+	bnx2x_cl45_read(bp, port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER2, &fw_ver2);
 	DP(NETIF_MSG_LINK, "8073 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
 
-	/* Only set bit 10 = 1 (Tx power down) */
-	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_TX_POWER_DOWN, &val);
+}
 
+static void bnx2x_bcm807x_force_10G(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 ext_phy_addr = ((params->ext_phy_config &
+				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	/* Force KR or KX */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_TX_POWER_DOWN, (val | 1<<10));
-
-	msleep(600);
-	/* Release bit 10 (Release Tx power down) */
+		       MDIO_PMA_REG_CTRL,
+		       0x2040);
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
-
+		       MDIO_PMA_REG_10G_CTRL2,
+		       0x000b);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_BCM_CTRL,
+		       0x0000);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_AN_DEVAD,
+		       MDIO_AN_REG_CTRL,
+		       0x0000);
 }
-
 static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
 {
 	struct bnx2x *bp = params->bp;
@@ -2236,32 +2278,51 @@ static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
 }
-static void bnx2x_bcm807x_force_10G(struct link_params *params)
+
+static void bnx2x_8073_set_pause_cl37(struct link_params *params,
+				  struct link_vars *vars)
 {
+
 	struct bnx2x *bp = params->bp;
-	u8 port = params->port;
+	u16 cl37_val;
 	u8 ext_phy_addr = ((params->ext_phy_config &
 				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
 				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
-	/* Force KR or KX */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_CTRL,
-		       0x2040);
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_10G_CTRL2,
-		       0x000b);
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_BCM_CTRL,
-		       0x0000);
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_read(bp, params->port,
+		      ext_phy_type,
+		      ext_phy_addr,
+		      MDIO_AN_DEVAD,
+		      MDIO_AN_REG_CL37_FC_LD, &cl37_val);
+
+	cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+	/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) {
+		cl37_val |=  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
+	}
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
+		cl37_val |=  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+	}
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
+		cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+	}
+	DP(NETIF_MSG_LINK,
+		 "Ext phy AN advertize cl37 0x%x\n", cl37_val);
+
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
 		       MDIO_AN_DEVAD,
-		       MDIO_AN_REG_CTRL,
-		       0x0000);
+		       MDIO_AN_REG_CL37_FC_LD, cl37_val);
+	msleep(500);
 }
 
 static void bnx2x_ext_phy_set_pause(struct link_params *params,
@@ -2282,13 +2343,16 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
 		      MDIO_AN_REG_ADV_PAUSE, &val);
 
 	val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
+
 	/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
 
-	if (vars->ieee_fc &
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
 	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
 		val |=  MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
 	}
-	if (vars->ieee_fc &
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
 	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
 		val |=
 		 MDIO_AN_REG_ADV_PAUSE_PAUSE;
@@ -2302,6 +2366,65 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
 		       MDIO_AN_REG_ADV_PAUSE, val);
 }
 
+
+static void bnx2x_init_internal_phy(struct link_params *params,
+				struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
+		u16 bank, rx_eq;
+
+		rx_eq = ((params->serdes_config &
+			  PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
+			 PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
+
+		DP(NETIF_MSG_LINK, "setting rx eq to 0x%x\n", rx_eq);
+		for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
+		      bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0)) {
+			CL45_WR_OVER_CL22(bp, port,
+					      params->phy_addr,
+					      bank ,
+					      MDIO_RX0_RX_EQ_BOOST,
+					      ((rx_eq &
+				MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
+				MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
+		}
+
+		/* forced speed requested? */
+		if (vars->line_speed != SPEED_AUTO_NEG) {
+			DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
+
+			/* disable autoneg */
+			bnx2x_set_autoneg(params, vars);
+
+			/* program speed and duplex */
+			bnx2x_program_serdes(params, vars);
+
+		} else { /* AN_mode */
+			DP(NETIF_MSG_LINK, "not SGMII, AN\n");
+
+			/* AN enabled */
+			bnx2x_set_brcm_cl37_advertisment(params);
+
+			/* program duplex & pause advertisement (for aneg) */
+			bnx2x_set_ieee_aneg_advertisment(params,
+						       vars->ieee_fc);
+
+			/* enable autoneg */
+			bnx2x_set_autoneg(params, vars);
+
+			/* enable and restart AN */
+			bnx2x_restart_autoneg(params);
+		}
+
+	} else { /* SGMII mode */
+		DP(NETIF_MSG_LINK, "SGMII\n");
+
+		bnx2x_initialize_sgmii_process(params, vars);
+	}
+}
+
 static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
@@ -2343,7 +2466,6 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
 		switch (ext_phy_type) {
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
-			DP(NETIF_MSG_LINK, "XGXS Direct\n");
 			break;
 
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
@@ -2419,7 +2541,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					       ext_phy_type,
 					       ext_phy_addr,
 					       MDIO_AN_DEVAD,
-					       MDIO_AN_REG_CL37_FD,
+					       MDIO_AN_REG_CL37_FC_LP,
 					       0x0020);
 				/* Enable CL37 AN */
 				bnx2x_cl45_write(bp, params->port,
@@ -2458,54 +2580,43 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 				rx_alarm_ctrl_val = 0x400;
 				lasi_ctrl_val = 0x0004;
 			} else {
-				/* In 8073, port1 is directed through emac0 and
-				 * port0 is directed through emac1
-				 */
 				rx_alarm_ctrl_val = (1<<2);
-				/*lasi_ctrl_val = 0x0005;*/
 				lasi_ctrl_val = 0x0004;
 			}
 
-			/* Wait for soft reset to get cleared upto 1 sec */
-			for (cnt = 0; cnt < 1000; cnt++) {
-				bnx2x_cl45_read(bp, params->port,
-					      ext_phy_type,
-					      ext_phy_addr,
-					      MDIO_PMA_DEVAD,
-					      MDIO_PMA_REG_CTRL,
-					      &ctrl);
-				if (!(ctrl & (1<<15)))
-					break;
-				msleep(1);
-			}
-			DP(NETIF_MSG_LINK,
-				"807x control reg 0x%x (after %d ms)\n",
-				ctrl, cnt);
+			/* enable LASI */
+			bnx2x_cl45_write(bp, params->port,
+				   ext_phy_type,
+				   ext_phy_addr,
+				   MDIO_PMA_DEVAD,
+				   MDIO_PMA_REG_RX_ALARM_CTRL,
+				   rx_alarm_ctrl_val);
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_LASI_CTRL,
+				       lasi_ctrl_val);
+
+			bnx2x_8073_set_pause_cl37(params, vars);
 
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072){
 				bnx2x_bcm8072_external_rom_boot(params);
 			} else {
-				bnx2x_bcm8073_external_rom_boot(params);
+
 				/* In case of 8073 with long xaui lines,
 				don't set the 8073 xaui low power*/
 				bnx2x_bcm8073_set_xaui_low_power_mode(params);
 			}
 
-			/* enable LASI */
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_RX_ALARM_CTRL,
-				       rx_alarm_ctrl_val);
-
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_LASI_CTRL,
-				       lasi_ctrl_val);
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      0xca13,
+				      &tmp1);
 
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
@@ -2519,12 +2630,21 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 			/* If this is forced speed, set to KR or KX
 			 * (all other are not supported)
 			 */
-			if (!(params->req_line_speed == SPEED_AUTO_NEG)) {
-			if (params->req_line_speed == SPEED_10000) {
-					bnx2x_bcm807x_force_10G(params);
-					DP(NETIF_MSG_LINK,
-					   "Forced speed 10G on 807X\n");
-					break;
+			if (params->loopback_mode == LOOPBACK_EXT) {
+				bnx2x_bcm807x_force_10G(params);
+				DP(NETIF_MSG_LINK,
+					"Forced speed 10G on 807X\n");
+				break;
+			} else {
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type, ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_BCM_CTRL,
+					       0x0002);
+			}
+			if (params->req_line_speed != SPEED_AUTO_NEG) {
+				if (params->req_line_speed == SPEED_10000) {
+					val = (1<<7);
 				} else if (params->req_line_speed ==
 					   SPEED_2500) {
 					val = (1<<5);
@@ -2539,11 +2659,14 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
 					val |= (1<<7);
 
+				/* Note that 2.5G works only when
+				used with 1G advertisment */
 				if (params->speed_cap_mask &
-					PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+					(PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+					 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
 					val |= (1<<5);
-				DP(NETIF_MSG_LINK, "807x autoneg val = 0x%x\n", val);
-				/*val = ((1<<5)|(1<<7));*/
+				DP(NETIF_MSG_LINK,
+					 "807x autoneg val = 0x%x\n", val);
 			}
 
 			bnx2x_cl45_write(bp, params->port,
@@ -2554,20 +2677,19 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-				/* Disable 2.5Ghz */
+
 				bnx2x_cl45_read(bp, params->port,
 					      ext_phy_type,
 					      ext_phy_addr,
 					      MDIO_AN_DEVAD,
 					      0x8329, &tmp1);
-/* SUPPORT_SPEED_CAPABILITY
-				(Due to the nature of the link order, its not
-				possible to enable 2.5G within the autoneg
-				capabilities)
-				if (params->speed_cap_mask &
-				PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)
-*/
-				if (params->req_line_speed == SPEED_2500) {
+
+				if (((params->speed_cap_mask &
+				      PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) &&
+				     (params->req_line_speed ==
+				      SPEED_AUTO_NEG)) ||
+				    (params->req_line_speed ==
+				     SPEED_2500)) {
 					u16 phy_ver;
 					/* Allow 2.5G for A1 and above */
 					bnx2x_cl45_read(bp, params->port,
@@ -2575,49 +2697,53 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					 ext_phy_addr,
 					 MDIO_PMA_DEVAD,
 					 0xc801, &phy_ver);
-
+					DP(NETIF_MSG_LINK, "Add 2.5G\n");
 					if (phy_ver > 0)
 						tmp1 |= 1;
 					else
 						tmp1 &= 0xfffe;
-			}
-				else
+				} else {
+					DP(NETIF_MSG_LINK, "Disable 2.5G\n");
 					tmp1 &= 0xfffe;
+				}
 
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_AN_DEVAD,
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
 					       0x8329, tmp1);
 			}
-			/* Add support for CL37 (passive mode) I */
-			bnx2x_cl45_write(bp, params->port,
+
+			/* Add support for CL37 (passive mode) II */
+
+			bnx2x_cl45_read(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
-				       MDIO_AN_REG_CL37_CL73, 0x040c);
-			/* Add support for CL37 (passive mode) II */
+				       MDIO_AN_REG_CL37_FC_LD,
+				       &tmp1);
+
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
-				       MDIO_AN_REG_CL37_FD, 0x20);
+				       MDIO_AN_REG_CL37_FC_LD, (tmp1 |
+				       ((params->req_duplex == DUPLEX_FULL) ?
+				       0x20 : 0x40)));
+
 			/* Add support for CL37 (passive mode) III */
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
 				       MDIO_AN_REG_CL37_AN, 0x1000);
-			/* Restart autoneg */
-			msleep(500);
 
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-
-			/* The SNR will improve about 2db by changing the
+				/* The SNR will improve about 2db by changing
 				BW and FEE main tap. Rest commands are executed
 				after link is up*/
-			/* Change FFE main cursor to 5 in EDC register */
+				/*Change FFE main cursor to 5 in EDC register*/
 				if (bnx2x_8073_is_snr_needed(params))
 					bnx2x_cl45_write(bp, params->port,
 						    ext_phy_type,
@@ -2626,25 +2752,28 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 						    MDIO_PMA_REG_EDC_FFE_MAIN,
 						    0xFB0C);
 
-			/* Enable FEC (Forware Error Correction)
-			   Request in the AN */
-			bnx2x_cl45_read(bp, params->port,
-				      ext_phy_type,
-				      ext_phy_addr,
-				      MDIO_AN_DEVAD,
-				      MDIO_AN_REG_ADV2, &tmp1);
+				/* Enable FEC (Forware Error Correction)
+				Request in the AN */
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_ADV2, &tmp1);
 
-			tmp1 |= (1<<15);
+				tmp1 |= (1<<15);
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_ADV2, tmp1);
 
-			bnx2x_cl45_write(bp, params->port,
-				      ext_phy_type,
-				      ext_phy_addr,
-				      MDIO_AN_DEVAD,
-				      MDIO_AN_REG_ADV2, tmp1);
 			}
 
 			bnx2x_ext_phy_set_pause(params, vars);
 
+			/* Restart autoneg */
+			msleep(500);
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
@@ -2701,10 +2830,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 		}
 
 	} else { /* SerDes */
-/*		ext_phy_addr = ((bp->ext_phy_config &
-				 PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
-				PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
-*/
+
 		ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
 		switch (ext_phy_type) {
 		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
@@ -2726,7 +2852,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
 
 static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
-				  struct link_vars *vars)
+				 struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u32 ext_phy_type;
@@ -2767,6 +2893,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 				      MDIO_PMA_REG_RX_SD, &rx_sd);
 			DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
 			ext_phy_link_up = (rx_sd & 0x1);
+			if (ext_phy_link_up)
+				vars->line_speed = SPEED_10000;
 			break;
 
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
@@ -2810,6 +2938,13 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 			 */
 			ext_phy_link_up = ((rx_sd & pcs_status & 0x1) ||
 					   (val2 & (1<<1)));
+			if (ext_phy_link_up) {
+				if (val2 & (1<<1))
+					vars->line_speed = SPEED_1000;
+				else
+					vars->line_speed = SPEED_10000;
+			}
+
 			/* clear LASI indication*/
 			bnx2x_cl45_read(bp, params->port, ext_phy_type,
 				      ext_phy_addr,
@@ -2820,6 +2955,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
 		{
+			u16 link_status = 0;
+			u16 an1000_status = 0;
 			if (ext_phy_type ==
 			     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
 				bnx2x_cl45_read(bp, params->port,
@@ -2846,14 +2983,9 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 					      MDIO_PMA_DEVAD,
 					      MDIO_PMA_REG_LASI_STATUS, &val1);
 
-				bnx2x_cl45_read(bp, params->port,
-					      ext_phy_type,
-					      ext_phy_addr,
-					      MDIO_PMA_DEVAD,
-					      MDIO_PMA_REG_LASI_STATUS, &val2);
 				DP(NETIF_MSG_LINK,
-					 "8703 LASI status 0x%x->0x%x\n",
-					  val1, val2);
+					 "8703 LASI status 0x%x\n",
+					  val1);
 			}
 
 			/* clear the interrupt LASI status register */
@@ -2869,20 +3001,23 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 				      MDIO_PCS_REG_STATUS, &val1);
 			DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n",
 			   val2, val1);
-			/* Check the LASI */
+			/* Clear MSG-OUT */
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
 				      ext_phy_addr,
 				      MDIO_PMA_DEVAD,
-				      MDIO_PMA_REG_RX_ALARM, &val2);
+				      0xca13,
+				      &val1);
+
+			/* Check the LASI */
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
 				      ext_phy_addr,
 				      MDIO_PMA_DEVAD,
-				      MDIO_PMA_REG_RX_ALARM,
-				      &val1);
-			DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
-			   val2, val1);
+				      MDIO_PMA_REG_RX_ALARM, &val2);
+
+			DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2);
+
 			/* Check the link status */
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
@@ -2905,29 +3040,29 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 			DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1);
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-				u16 an1000_status = 0;
+
 				if (ext_phy_link_up &&
-				    (
-				     (params->req_line_speed != SPEED_10000)
-				     )) {
+				    ((params->req_line_speed !=
+					SPEED_10000))) {
 					if (bnx2x_bcm8073_xaui_wa(params)
 					     != 0) {
 						ext_phy_link_up = 0;
 						break;
 					}
-					bnx2x_cl45_read(bp, params->port,
+				}
+				bnx2x_cl45_read(bp, params->port,
 						      ext_phy_type,
 						      ext_phy_addr,
-						      MDIO_XS_DEVAD,
+						      MDIO_AN_DEVAD,
 						      0x8304,
 						      &an1000_status);
-					bnx2x_cl45_read(bp, params->port,
+				bnx2x_cl45_read(bp, params->port,
 						      ext_phy_type,
 						      ext_phy_addr,
-						      MDIO_XS_DEVAD,
+						      MDIO_AN_DEVAD,
 						      0x8304,
 						      &an1000_status);
-				}
+
 				/* Check the link status on 1.1.2 */
 				bnx2x_cl45_read(bp, params->port,
 					      ext_phy_type,
@@ -2943,8 +3078,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 					     "an_link_status=0x%x\n",
 					  val2, val1, an1000_status);
 
-				ext_phy_link_up = (((val1 & 4) == 4) ||
-						    (an1000_status & (1<<1)));
+					ext_phy_link_up = (((val1 & 4) == 4) ||
+						(an1000_status & (1<<1)));
 				if (ext_phy_link_up &&
 				    bnx2x_8073_is_snr_needed(params)) {
 					/* The SNR will improve about 2dbby
@@ -2968,8 +3103,74 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 						    MDIO_PMA_REG_CDR_BANDWIDTH,
 						    0x0333);
 
+
+				}
+				bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_PMA_DEVAD,
+						      0xc820,
+						      &link_status);
+
+				/* Bits 0..2 --> speed detected,
+				   bits 13..15--> link is down */
+				if ((link_status & (1<<2)) &&
+				    (!(link_status & (1<<15)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_10000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 10G\n", params->port);
+				} else if ((link_status & (1<<1)) &&
+					   (!(link_status & (1<<14)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_2500;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 2.5G\n", params->port);
+				} else if ((link_status & (1<<0)) &&
+					   (!(link_status & (1<<13)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_1000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 1G\n", params->port);
+				} else {
+					ext_phy_link_up = 0;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " is down\n", params->port);
+				}
+			} else {
+				/* See if 1G link is up for the 8072 */
+				bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_AN_DEVAD,
+						      0x8304,
+						      &an1000_status);
+				bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_AN_DEVAD,
+						      0x8304,
+						      &an1000_status);
+				if (an1000_status & (1<<1)) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_1000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 1G\n", params->port);
+				} else if (ext_phy_link_up) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_10000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 10G\n", params->port);
 				}
 			}
+
+
 			break;
 		}
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
@@ -3006,6 +3207,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 					      MDIO_AN_DEVAD,
 					      MDIO_AN_REG_MASTER_STATUS,
 					      &val2);
+				vars->line_speed = SPEED_10000;
 				DP(NETIF_MSG_LINK,
 					 "SFX7101 AN status 0x%x->Master=%x\n",
 					  val2,
@@ -3100,7 +3302,7 @@ static void bnx2x_link_int_enable(struct link_params *params)
  * link management
  */
 static void bnx2x_link_int_ack(struct link_params *params,
-			     struct link_vars *vars, u16 is_10g)
+			     struct link_vars *vars, u8 is_10g)
 {
 	struct bnx2x *bp = params->bp;
 	u8 port = params->port;
@@ -3181,7 +3383,8 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
 }
 
 
-static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
+static void bnx2x_turn_on_ef(struct bnx2x *bp, u8 port, u8 ext_phy_addr,
+			   u32 ext_phy_type)
 {
 	u32 cnt = 0;
 	u16 ctrl = 0;
@@ -3192,12 +3395,14 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
 
 	/* take ext phy out of reset */
 	bnx2x_set_gpio(bp,
-			MISC_REGISTERS_GPIO_2,
-			MISC_REGISTERS_GPIO_HIGH);
+			  MISC_REGISTERS_GPIO_2,
+			  MISC_REGISTERS_GPIO_HIGH,
+			  port);
 
 	bnx2x_set_gpio(bp,
-			MISC_REGISTERS_GPIO_1,
-			MISC_REGISTERS_GPIO_HIGH);
+			  MISC_REGISTERS_GPIO_1,
+			  MISC_REGISTERS_GPIO_HIGH,
+			  port);
 
 	/* wait for 5ms */
 	msleep(5);
@@ -3205,7 +3410,7 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
 	for (cnt = 0; cnt < 1000; cnt++) {
 		msleep(1);
 		bnx2x_cl45_read(bp, port,
-			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
+			      ext_phy_type,
 			      ext_phy_addr,
 			      MDIO_PMA_DEVAD,
 			      MDIO_PMA_REG_CTRL,
@@ -3217,13 +3422,17 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
 	}
 }
 
-static void bnx2x_turn_off_sf(struct bnx2x *bp)
+static void bnx2x_turn_off_sf(struct bnx2x *bp, u8 port)
 {
 	/* put sf to reset */
-	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, MISC_REGISTERS_GPIO_LOW);
 	bnx2x_set_gpio(bp,
-			MISC_REGISTERS_GPIO_2,
-			MISC_REGISTERS_GPIO_LOW);
+			  MISC_REGISTERS_GPIO_1,
+			  MISC_REGISTERS_GPIO_LOW,
+			  port);
+	bnx2x_set_gpio(bp,
+			  MISC_REGISTERS_GPIO_2,
+			  MISC_REGISTERS_GPIO_LOW,
+			  port);
 }
 
 u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
@@ -3253,7 +3462,8 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 
 		/* Take ext phy out of reset */
 		if (!driver_loaded)
-			bnx2x_turn_on_sf(bp, params->port, ext_phy_addr);
+			bnx2x_turn_on_ef(bp, params->port, ext_phy_addr,
+				       ext_phy_type);
 
 		/*  wait for 1ms */
 		msleep(1);
@@ -3276,11 +3486,16 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 		version[4] = '\0';
 
 		if (!driver_loaded)
-			bnx2x_turn_off_sf(bp);
+			bnx2x_turn_off_sf(bp, params->port);
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
 	{
+		/* Take ext phy out of reset */
+		if (!driver_loaded)
+			bnx2x_turn_on_ef(bp, params->port, ext_phy_addr,
+				       ext_phy_type);
+
 		bnx2x_cl45_read(bp, params->port, ext_phy_type,
 			      ext_phy_addr,
 			      MDIO_PMA_DEVAD,
@@ -3333,7 +3548,7 @@ static void bnx2x_set_xgxs_loopback(struct link_params *params,
 	struct bnx2x *bp = params->bp;
 
 	if (is_10g) {
-		 u32 md_devad;
+		u32 md_devad;
 
 		DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n");
 
@@ -3553,6 +3768,8 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 	       u16 hw_led_mode, u32 chip_id)
 {
 	u8 rc = 0;
+	u32 tmp;
+	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 	DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
 	DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
 		 speed, hw_led_mode);
@@ -3561,6 +3778,9 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 		REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0);
 		REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
 			   SHARED_HW_CFG_LED_MAC1);
+
+		tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+		EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
 		break;
 
 	case LED_MODE_OPER:
@@ -3572,6 +3792,10 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 			   LED_BLINK_RATE_VAL);
 		REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
 			   port*4, 1);
+		tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+		EMAC_WR(bp, EMAC_REG_EMAC_LED,
+			    (tmp & (~EMAC_LED_OVERRIDE)));
+
 		if (!CHIP_IS_E1H(bp) &&
 		    ((speed == SPEED_2500) ||
 		     (speed == SPEED_1000) ||
@@ -3622,7 +3846,8 @@ static u8 bnx2x_link_initialize(struct link_params *params,
 	struct bnx2x *bp = params->bp;
 	u8 port = params->port;
 	u8 rc = 0;
-
+	u8 non_ext_phy;
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 	/* Activate the external PHY */
 	bnx2x_ext_phy_reset(params, vars);
 
@@ -3644,10 +3869,6 @@ static u8 bnx2x_link_initialize(struct link_params *params,
 		bnx2x_set_swap_lanes(params);
 	}
 
-	/* Set Parallel Detect */
-	if (params->req_line_speed == SPEED_AUTO_NEG)
-		bnx2x_set_parallel_detection(params, vars->phy_flags);
-
 	if (vars->phy_flags & PHY_XGXS_FLAG) {
 		if (params->req_line_speed &&
 		    ((params->req_line_speed == SPEED_100) ||
@@ -3657,68 +3878,33 @@ static u8 bnx2x_link_initialize(struct link_params *params,
 			vars->phy_flags &= ~PHY_SGMII_FLAG;
 		}
 	}
+	/* In case of external phy existance, the line speed would be the
+	 line speed linked up by the external phy. In case it is direct only,
+	  then the line_speed during initialization will be equal to the
+	   req_line_speed*/
+	vars->line_speed = params->req_line_speed;
 
-	if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
-		u16 bank, rx_eq;
-
-		rx_eq = ((params->serdes_config &
-			  PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
-			 PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
+	bnx2x_calc_ieee_aneg_adv(params, &vars->ieee_fc);
 
-		DP(NETIF_MSG_LINK, "setting rx eq to 0x%x\n", rx_eq);
-		for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
-		      bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0)) {
-			CL45_WR_OVER_CL22(bp, port,
-					      params->phy_addr,
-					      bank ,
-					      MDIO_RX0_RX_EQ_BOOST,
-					      ((rx_eq &
-				MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
-				MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
-		}
-
-		/* forced speed requested? */
-		if (params->req_line_speed != SPEED_AUTO_NEG) {
-			DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
-
-			/* disable autoneg */
-			bnx2x_set_autoneg(params, vars);
-
-			/* program speed and duplex */
-			bnx2x_program_serdes(params);
-			vars->ieee_fc =
-				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
-
-		} else { /* AN_mode */
-			DP(NETIF_MSG_LINK, "not SGMII, AN\n");
-
-			/* AN enabled */
-			bnx2x_set_brcm_cl37_advertisment(params);
-
-			/* program duplex & pause advertisement (for aneg) */
-			bnx2x_set_ieee_aneg_advertisment(params,
-						       &vars->ieee_fc);
-
-			/* enable autoneg */
-			bnx2x_set_autoneg(params, vars);
-
-			/* enable and restart AN */
-			bnx2x_restart_autoneg(params);
-		}
-
-	} else { /* SGMII mode */
-		DP(NETIF_MSG_LINK, "SGMII\n");
-
-		bnx2x_initialize_sgmii_process(params);
+	/* init ext phy and enable link state int */
+	non_ext_phy = ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
+		       (params->loopback_mode == LOOPBACK_XGXS_10) ||
+		       (params->loopback_mode == LOOPBACK_EXT_PHY));
+
+	if (non_ext_phy ||
+	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705)) {
+		if (params->req_line_speed == SPEED_AUTO_NEG)
+			bnx2x_set_parallel_detection(params, vars->phy_flags);
+		bnx2x_init_internal_phy(params, vars);
 	}
 
-	/* init ext phy and enable link state int */
-	rc |= bnx2x_ext_phy_init(params, vars);
+	if (!non_ext_phy)
+		rc |= bnx2x_ext_phy_init(params, vars);
 
 	bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-		       (NIG_STATUS_XGXS0_LINK10G |
-			NIG_STATUS_XGXS0_LINK_STATUS |
-			NIG_STATUS_SERDES0_LINK_STATUS));
+		     (NIG_STATUS_XGXS0_LINK10G |
+		      NIG_STATUS_XGXS0_LINK_STATUS |
+		      NIG_STATUS_SERDES0_LINK_STATUS));
 
 	return rc;
 
@@ -3730,15 +3916,23 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 	struct bnx2x *bp = params->bp;
 
 	u32 val;
-	DP(NETIF_MSG_LINK, "Phy Initialization started\n");
+	DP(NETIF_MSG_LINK, "Phy Initialization started \n");
 	DP(NETIF_MSG_LINK, "req_speed = %d, req_flowctrl=%d\n",
 		  params->req_line_speed, params->req_flow_ctrl);
 	vars->link_status = 0;
+	vars->phy_link_up = 0;
+	vars->link_up = 0;
+	vars->line_speed = 0;
+	vars->duplex = DUPLEX_FULL;
+	vars->flow_ctrl = FLOW_CTRL_NONE;
+	vars->mac_type = MAC_TYPE_NONE;
+
 	if (params->switch_cfg ==  SWITCH_CFG_1G)
 		vars->phy_flags = PHY_SERDES_FLAG;
 	else
 		vars->phy_flags = PHY_XGXS_FLAG;
 
+
 	/* disable attentions */
 	bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
 		       (NIG_MASK_XGXS0_LINK_STATUS |
@@ -3894,6 +4088,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 		}
 
 		bnx2x_link_initialize(params, vars);
+		msleep(30);
 		bnx2x_link_int_enable(params);
 	}
 	return 0;
@@ -3943,39 +4138,22 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars)
 			/* HW reset */
 
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+					  MISC_REGISTERS_GPIO_OUTPUT_LOW,
+					  port);
 
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+					  MISC_REGISTERS_GPIO_OUTPUT_LOW,
+					  port);
 
 			DP(NETIF_MSG_LINK, "reset external PHY\n");
-		} else {
-
-			u8 ext_phy_addr = ((ext_phy_config &
-					 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-					 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
-			/* SW reset */
-			bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_CTRL,
-				       1<<15);
-
-			/* Set Low Power Mode */
-			bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-				  MDIO_PMA_DEVAD,
-				  MDIO_PMA_REG_CTRL,
-				  1<<11);
-
-
-			if (ext_phy_type ==
-			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-				DP(NETIF_MSG_LINK, "Setting 8073 port %d into"
+		} else if (ext_phy_type ==
+			   PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+				DP(NETIF_MSG_LINK, "Setting 8073 port %d into "
 					 "low power mode\n",
 					 port);
 				bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-					MISC_REGISTERS_GPIO_OUTPUT_LOW);
-			}
+					MISC_REGISTERS_GPIO_OUTPUT_LOW,
+						  port);
 		}
 	}
 	/* reset the SerDes/XGXS */
@@ -3995,6 +4173,73 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars)
 	return 0;
 }
 
+static u8 bnx2x_update_link_down(struct link_params *params,
+			       struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);
+	bnx2x_set_led(bp, port, LED_MODE_OFF,
+		    0, params->hw_led_mode,
+		    params->chip_id);
+
+	/* indicate no mac active */
+	vars->mac_type = MAC_TYPE_NONE;
+
+	/* update shared memory */
+	vars->link_status = 0;
+	vars->line_speed = 0;
+	bnx2x_update_mng(params, vars->link_status);
+
+	/* activate nig drain */
+	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+	/* reset BigMac */
+	bnx2x_bmac_rx_disable(bp, params->port);
+	REG_WR(bp, GRCBASE_MISC +
+		   MISC_REGISTERS_RESET_REG_2_CLEAR,
+		   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+	return 0;
+}
+
+static u8 bnx2x_update_link_up(struct link_params *params,
+			     struct link_vars *vars,
+			     u8 link_10g, u32 gp_status)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 rc = 0;
+	vars->link_status |= LINK_STATUS_LINK_UP;
+	if (link_10g) {
+		bnx2x_bmac_enable(params, vars, 0);
+		bnx2x_set_led(bp, port, LED_MODE_OPER,
+			    SPEED_10000, params->hw_led_mode,
+			    params->chip_id);
+
+	} else {
+		bnx2x_emac_enable(params, vars, 0);
+		rc = bnx2x_emac_program(params, vars->line_speed,
+				      vars->duplex);
+
+		/* AN complete? */
+		if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
+			if (!(vars->phy_flags &
+			      PHY_SGMII_FLAG))
+				bnx2x_set_sgmii_tx_driver(params);
+		}
+	}
+
+	/* PBF - link up */
+	rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
+			      vars->line_speed);
+
+	/* disable drain */
+	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
+
+	/* update shared memory */
+	bnx2x_update_mng(params, vars->link_status);
+	return rc;
+}
 /* This function should called upon link interrupt */
 /* In case vars->link_up, driver needs to
 	1. Update the pbf
@@ -4012,10 +4257,10 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u8 port = params->port;
-	u16 i;
 	u16 gp_status;
-	u16 link_10g;
-	u8 rc = 0;
+	u8 link_10g;
+	u8 ext_phy_link_up, rc = 0;
+	u32 ext_phy_type;
 
 	DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n",
 	 port,
@@ -4031,15 +4276,16 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
 
+	ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
-	/* avoid fast toggling */
-	for (i = 0; i < 10; i++) {
-		msleep(10);
-		CL45_RD_OVER_CL22(bp, port, params->phy_addr,
-				      MDIO_REG_BANK_GP_STATUS,
-				      MDIO_GP_STATUS_TOP_AN_STATUS1,
-				      &gp_status);
-	}
+	/* Check external link change only for non-direct */
+	ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars);
+
+	/* Read gp_status */
+	CL45_RD_OVER_CL22(bp, port, params->phy_addr,
+			      MDIO_REG_BANK_GP_STATUS,
+			      MDIO_GP_STATUS_TOP_AN_STATUS1,
+			      &gp_status);
 
 	rc = bnx2x_link_settings_status(params, vars, gp_status);
 	if (rc != 0)
@@ -4055,73 +4301,177 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 
 	bnx2x_link_int_ack(params, vars, link_10g);
 
+	/* In case external phy link is up, and internal link is down
+	( not initialized yet probably after link initialization, it needs
+	to be initialized.
+	Note that after link down-up as result of cable plug,
+	the xgxs link would probably become up again without the need to
+	initialize it*/
+
+	if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
+	    (ext_phy_link_up && !vars->phy_link_up))
+		bnx2x_init_internal_phy(params, vars);
+
 	/* link is up only if both local phy and external phy are up */
-	vars->link_up = (vars->phy_link_up &&
-			   bnx2x_ext_phy_is_link_up(params, vars));
+	vars->link_up = (ext_phy_link_up && vars->phy_link_up);
 
-	if (!vars->phy_link_up &&
-	    REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18)) {
-		bnx2x_ext_phy_is_link_up(params, vars); /* Clear interrupt */
+	if (vars->link_up)
+		rc = bnx2x_update_link_up(params, vars, link_10g, gp_status);
+	else
+		rc = bnx2x_update_link_down(params, vars);
+
+	return rc;
+}
+
+static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	u8 ext_phy_addr[PORT_MAX];
+	u16 val;
+	s8 port;
+
+	/* PART1 - Reset both phys */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		/* Extract the ext phy address for the port */
+		u32 ext_phy_config = REG_RD(bp, shmem_base +
+					offsetof(struct shmem_region,
+		   dev_info.port_hw_config[port].external_phy_config));
+
+		/* disable attentions */
+		bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+			     (NIG_MASK_XGXS0_LINK_STATUS |
+			      NIG_MASK_XGXS0_LINK10G |
+			      NIG_MASK_SERDES0_LINK_STATUS |
+			      NIG_MASK_MI_INT));
+
+		ext_phy_addr[port] =
+			((ext_phy_config &
+			      PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+			      PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+		/* Need to take the phy out of low power mode in order
+			to write to access its registers */
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				  MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
+
+		/* Reset the phy */
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_CTRL,
+			       1<<15);
 	}
 
-	if (vars->link_up) {
-		vars->link_status |= LINK_STATUS_LINK_UP;
-		if (link_10g) {
-			bnx2x_bmac_enable(params, vars, 0);
-			bnx2x_set_led(bp, port, LED_MODE_OPER,
-				    SPEED_10000, params->hw_led_mode,
-				    params->chip_id);
+	/* Add delay of 150ms after reset */
+	msleep(150);
 
-		} else {
-			bnx2x_emac_enable(params, vars, 0);
-			rc = bnx2x_emac_program(params, vars->line_speed,
-					      vars->duplex);
+	/* PART2 - Download firmware to both phys */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		u16 fw_ver1;
 
-			/* AN complete? */
-			if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
-				if (!(vars->phy_flags &
-				      PHY_SGMII_FLAG))
-					bnx2x_set_sgmii_tx_driver(params);
-			}
+		bnx2x_bcm8073_external_rom_boot(bp, port,
+						      ext_phy_addr[port]);
+
+		bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+		if (fw_ver1 == 0) {
+			DP(NETIF_MSG_LINK,
+				 "bnx2x_8073_common_init_phy port %x "
+				 "fw Download failed\n", port);
+			return -EINVAL;
 		}
 
-		/* PBF - link up */
-		rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
-				      vars->line_speed);
+		/* Only set bit 10 = 1 (Tx power down) */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_TX_POWER_DOWN, &val);
 
-		/* disable drain */
-		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
+		/* Phase1 of TX_POWER_DOWN reset */
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_TX_POWER_DOWN,
+			       (val | 1<<10));
+	}
 
-		/* update shared memory */
-		bnx2x_update_mng(params, vars->link_status);
+	/* Toggle Transmitter: Power down and then up with 600ms
+	   delay between */
+	msleep(600);
 
-	} else { /* link down */
-		DP(NETIF_MSG_LINK, "Port %x: Link is down\n", params->port);
-		bnx2x_set_led(bp, port, LED_MODE_OFF,
-			    0, params->hw_led_mode,
-			    params->chip_id);
+	/* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		/* Phase2 of POWER_DOWN_RESET*/
+		/* Release bit 10 (Release Tx power down) */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_TX_POWER_DOWN, &val);
 
-		/* indicate no mac active */
-		vars->mac_type = MAC_TYPE_NONE;
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
+		msleep(15);
 
-		/* update shared memory */
-		vars->link_status = 0;
-		bnx2x_update_mng(params, vars->link_status);
+		/* Read modify write the SPI-ROM version select register */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_EDC_FFE_MAIN, &val);
+		bnx2x_cl45_write(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12)));
 
-		/* activate nig drain */
-		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+		/* set GPIO2 back to LOW */
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				  MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+	}
+	return 0;
 
-		/* reset BigMac */
-		bnx2x_bmac_rx_disable(bp, params->port);
-		REG_WR(bp, GRCBASE_MISC +
-			   MISC_REGISTERS_RESET_REG_2_CLEAR,
-			   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+}
 
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	u8 rc = 0;
+	u32 ext_phy_type;
+
+	DP(NETIF_MSG_LINK, "bnx2x_common_init_phy\n");
+
+	/* Read the ext_phy_type for arbitrary port(0) */
+	ext_phy_type = XGXS_EXT_PHY_TYPE(
+			REG_RD(bp, shmem_base +
+			   offsetof(struct shmem_region,
+			     dev_info.port_hw_config[0].external_phy_config)));
+
+	switch (ext_phy_type) {
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+	{
+		rc = bnx2x_8073_common_init_phy(bp, shmem_base);
+		break;
+	}
+	default:
+		DP(NETIF_MSG_LINK,
+			 "bnx2x_common_init_phy: ext_phy 0x%x not required\n",
+			 ext_phy_type);
+		break;
 	}
 
 	return rc;
 }
 
+
+
 static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
 {
 	u16 val, cnt;
@@ -4154,7 +4504,7 @@ static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
 }
 #define RESERVED_SIZE 256
 /* max application is 160K bytes - data at end of RAM */
-#define MAX_APP_SIZE 160*1024 - RESERVED_SIZE
+#define MAX_APP_SIZE (160*1024 - RESERVED_SIZE)
 
 /* Header is 14 bytes */
 #define HEADER_SIZE 14
@@ -4192,12 +4542,12 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 		size = MAX_APP_SIZE+HEADER_SIZE;
 	}
 	DP(NETIF_MSG_LINK, "File version is %c%c\n", data[0x14e], data[0x14f]);
-	DP(NETIF_MSG_LINK, "                %c%c\n", data[0x150], data[0x151]);
+	DP(NETIF_MSG_LINK, "  	      %c%c\n", data[0x150], data[0x151]);
 	/* Put the DSP in download mode by setting FLASH_CFG[2] to 1
 	   and issuing a reset.*/
 
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
-			  MISC_REGISTERS_GPIO_HIGH);
+			  MISC_REGISTERS_GPIO_HIGH, port);
 
 	bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
 
@@ -4429,7 +4779,8 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 	}
 
 	/* DSP Remove Download Mode */
-	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, MISC_REGISTERS_GPIO_LOW);
+	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+			  MISC_REGISTERS_GPIO_LOW, port);
 
 	bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
 
@@ -4437,7 +4788,7 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 	for (cnt = 0; cnt < 100; cnt++)
 		msleep(5);
 
-	bnx2x_hw_reset(bp);
+	bnx2x_hw_reset(bp, port);
 
 	for (cnt = 0; cnt < 100; cnt++)
 		msleep(5);
@@ -4473,7 +4824,7 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 		      MDIO_PMA_REG_7101_VER2,
 		      &image_revision2);
 
-	if (data[0x14e]	!= (image_revision2&0xFF) ||
+	if (data[0x14e] != (image_revision2&0xFF) ||
 	    data[0x14f] != ((image_revision2&0xFF00)>>8) ||
 	    data[0x150] != (image_revision1&0xFF) ||
 	    data[0x151] != ((image_revision1&0xFF00)>>8)) {
@@ -4508,11 +4859,11 @@ u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
 		/* Take ext phy out of reset */
 		if (!driver_loaded)
-			bnx2x_turn_on_sf(bp, port, ext_phy_addr);
+			bnx2x_turn_on_ef(bp, port, ext_phy_addr, ext_phy_type);
 		rc = bnx2x_sfx7101_flash_download(bp, port, ext_phy_addr,
 						data, size);
 		if (!driver_loaded)
-			bnx2x_turn_off_sf(bp);
+			bnx2x_turn_off_sf(bp, port);
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index 714d37ac95d..86d54a17b41 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -55,14 +55,17 @@ struct link_params {
 #define LOOPBACK_BMAC	2
 #define LOOPBACK_XGXS_10	3
 #define LOOPBACK_EXT_PHY	4
+#define LOOPBACK_EXT 	5
 
 	u16 req_duplex;
 	u16 req_flow_ctrl;
+	u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
+	req_flow_ctrl is set to AUTO */
 	u16 req_line_speed; /* Also determine AutoNeg */
 
 	/* Device parameters */
 	u8 mac_addr[6];
-	u16 mtu;
+
 
 
 	/* shmem parameters */
@@ -140,7 +143,7 @@ u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
 		  u8 phy_addr, u8 devad, u16 reg, u16 val);
 
 /* Reads the link_status from the shmem,
-   and update the link vars accordinaly */
+   and update the link vars accordingly */
 void bnx2x_link_status_update(struct link_params *input,
 			    struct link_vars *output);
 /* returns string representing the fw_version of the external phy */
@@ -149,7 +152,7 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 
 /* Set/Unset the led
    Basically, the CLC takes care of the led for the link, but in case one needs
-   to set/unset the led unnatually, set the "mode" to LED_MODE_OPER to
+   to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
    blink the led, and LED_MODE_OFF to set the led off.*/
 u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 	       u16 hw_led_mode, u32 chip_id);
@@ -164,5 +167,7 @@ u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
 	otherwise link is down*/
 u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars);
 
+/* One-time initialization for external phy after power up */
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base);
 
 #endif /* BNX2X_LINK_H */
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index af251a5df84..a8eb3c4a47c 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -44,7 +44,6 @@
 #include <net/ip.h>
 #include <net/tcp.h>
 #include <net/checksum.h>
-#include <linux/version.h>
 #include <net/ip6_checksum.h>
 #include <linux/workqueue.h>
 #include <linux/crc32.h>
@@ -60,8 +59,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION      "1.45.6"
-#define DRV_MODULE_RELDATE      "2008/06/23"
+#define DRV_MODULE_VERSION	"1.45.21"
+#define DRV_MODULE_RELDATE	"2008/09/03"
 #define BNX2X_BC_VER		0x040200
 
 /* Time in jiffies before concluding the transmitter is hung */
@@ -76,23 +75,21 @@ MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
+static int disable_tpa;
 static int use_inta;
 static int poll;
 static int debug;
-static int disable_tpa;
-static int nomcp;
 static int load_count[3]; /* 0-common, 1-port0, 2-port1 */
 static int use_multi;
 
+module_param(disable_tpa, int, 0);
 module_param(use_inta, int, 0);
 module_param(poll, int, 0);
 module_param(debug, int, 0);
-module_param(disable_tpa, int, 0);
-module_param(nomcp, int, 0);
+MODULE_PARM_DESC(disable_tpa, "disable the TPA (LRO) feature");
 MODULE_PARM_DESC(use_inta, "use INT#A instead of MSI-X");
 MODULE_PARM_DESC(poll, "use polling (for debug)");
 MODULE_PARM_DESC(debug, "default debug msglevel");
-MODULE_PARM_DESC(nomcp, "ignore management CPU");
 
 #ifdef BNX2X_MULTI
 module_param(use_multi, int, 0);
@@ -237,17 +234,16 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
 	while (*wb_comp != DMAE_COMP_VAL) {
 		DP(BNX2X_MSG_OFF, "wb_comp 0x%08x\n", *wb_comp);
 
-		/* adjust delay for emulation/FPGA */
-		if (CHIP_REV_IS_SLOW(bp))
-			msleep(100);
-		else
-			udelay(5);
-
 		if (!cnt) {
 			BNX2X_ERR("dmae timeout!\n");
 			break;
 		}
 		cnt--;
+		/* adjust delay for emulation/FPGA */
+		if (CHIP_REV_IS_SLOW(bp))
+			msleep(100);
+		else
+			udelay(5);
 	}
 
 	mutex_unlock(&bp->dmae_mutex);
@@ -310,17 +306,16 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
 
 	while (*wb_comp != DMAE_COMP_VAL) {
 
-		/* adjust delay for emulation/FPGA */
-		if (CHIP_REV_IS_SLOW(bp))
-			msleep(100);
-		else
-			udelay(5);
-
 		if (!cnt) {
 			BNX2X_ERR("dmae timeout!\n");
 			break;
 		}
 		cnt--;
+		/* adjust delay for emulation/FPGA */
+		if (CHIP_REV_IS_SLOW(bp))
+			msleep(100);
+		else
+			udelay(5);
 	}
 	DP(BNX2X_MSG_OFF, "data [0x%08x 0x%08x 0x%08x 0x%08x]\n",
 	   bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
@@ -503,6 +498,9 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 	int i;
 	u16 j, start, end;
 
+	bp->stats_state = STATS_STATE_DISABLED;
+	DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
+
 	BNX2X_ERR("begin crash dump -----------------\n");
 
 	for_each_queue(bp, i) {
@@ -513,17 +511,20 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 			  "  tx_bd_prod(%x)  tx_bd_cons(%x)  *tx_cons_sb(%x)\n",
 			  i, fp->tx_pkt_prod, fp->tx_pkt_cons, fp->tx_bd_prod,
 			  fp->tx_bd_cons, le16_to_cpu(*fp->tx_cons_sb));
-		BNX2X_ERR("          rx_comp_prod(%x)  rx_comp_cons(%x)"
-			  "  *rx_cons_sb(%x)  *rx_bd_cons_sb(%x)"
-			  "  rx_sge_prod(%x)  last_max_sge(%x)\n",
-			  fp->rx_comp_prod, fp->rx_comp_cons,
-			  le16_to_cpu(*fp->rx_cons_sb),
-			  le16_to_cpu(*fp->rx_bd_cons_sb),
-			  fp->rx_sge_prod, fp->last_max_sge);
-		BNX2X_ERR("          fp_c_idx(%x)  fp_u_idx(%x)"
-			  "  bd data(%x,%x)  rx_alloc_failed(%lx)\n",
-			  fp->fp_c_idx, fp->fp_u_idx, hw_prods->packets_prod,
-			  hw_prods->bds_prod, fp->rx_alloc_failed);
+		BNX2X_ERR("          rx_bd_prod(%x)  rx_bd_cons(%x)"
+			  "  *rx_bd_cons_sb(%x)  rx_comp_prod(%x)"
+			  "  rx_comp_cons(%x)  *rx_cons_sb(%x)\n",
+			  fp->rx_bd_prod, fp->rx_bd_cons,
+			  le16_to_cpu(*fp->rx_bd_cons_sb), fp->rx_comp_prod,
+			  fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb));
+		BNX2X_ERR("          rx_sge_prod(%x)  last_max_sge(%x)"
+			  "  fp_c_idx(%x)  *sb_c_idx(%x)  fp_u_idx(%x)"
+			  "  *sb_u_idx(%x)  bd data(%x,%x)\n",
+			  fp->rx_sge_prod, fp->last_max_sge, fp->fp_c_idx,
+			  fp->status_blk->c_status_block.status_block_index,
+			  fp->fp_u_idx,
+			  fp->status_blk->u_status_block.status_block_index,
+			  hw_prods->packets_prod, hw_prods->bds_prod);
 
 		start = TX_BD(le16_to_cpu(*fp->tx_cons_sb) - 10);
 		end = TX_BD(le16_to_cpu(*fp->tx_cons_sb) + 245);
@@ -553,8 +554,8 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 				  j, rx_bd[1], rx_bd[0], sw_bd->skb);
 		}
 
-		start = 0;
-		end = RX_SGE_CNT*NUM_RX_SGE_PAGES;
+		start = RX_SGE(fp->rx_sge_prod);
+		end = RX_SGE(fp->last_max_sge);
 		for (j = start; j < end; j++) {
 			u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j];
 			struct sw_rx_page *sw_page = &fp->rx_page_ring[j];
@@ -582,9 +583,6 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 	bnx2x_fw_dump(bp);
 	bnx2x_mc_assert(bp);
 	BNX2X_ERR("end crash dump -----------------\n");
-
-	bp->stats_state = STATS_STATE_DISABLED;
-	DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
 }
 
 static void bnx2x_int_enable(struct bnx2x *bp)
@@ -684,7 +682,8 @@ static void bnx2x_int_disable_sync(struct bnx2x *bp)
 static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 sb_id,
 				u8 storm, u16 index, u8 op, u8 update)
 {
-	u32 igu_addr = (IGU_ADDR_INT_ACK + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
+	u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 +
+		       COMMAND_REG_INT_ACK);
 	struct igu_ack_register igu_ack;
 
 	igu_ack.status_block_index = index;
@@ -694,9 +693,9 @@ static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 sb_id,
 			 (update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) |
 			 (op << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT));
 
-	DP(BNX2X_MSG_OFF, "write 0x%08x to IGU addr 0x%x\n",
-	   (*(u32 *)&igu_ack), BAR_IGU_INTMEM + igu_addr);
-	REG_WR(bp, BAR_IGU_INTMEM + igu_addr, (*(u32 *)&igu_ack));
+	DP(BNX2X_MSG_OFF, "write 0x%08x to HC addr 0x%x\n",
+	   (*(u32 *)&igu_ack), hc_addr);
+	REG_WR(bp, hc_addr, (*(u32 *)&igu_ack));
 }
 
 static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
@@ -716,36 +715,15 @@ static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
 	return rc;
 }
 
-static inline int bnx2x_has_work(struct bnx2x_fastpath *fp)
-{
-	u16 rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
-
-	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
-		rx_cons_sb++;
-
-	if ((fp->rx_comp_cons != rx_cons_sb) ||
-	    (fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) ||
-	    (fp->tx_pkt_prod != fp->tx_pkt_cons))
-		return 1;
-
-	return 0;
-}
-
 static u16 bnx2x_ack_int(struct bnx2x *bp)
 {
-	u32 igu_addr = (IGU_ADDR_SIMD_MASK + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
-	u32 result = REG_RD(bp, BAR_IGU_INTMEM + igu_addr);
+	u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 +
+		       COMMAND_REG_SIMD_MASK);
+	u32 result = REG_RD(bp, hc_addr);
 
-	DP(BNX2X_MSG_OFF, "read 0x%08x from IGU addr 0x%x\n",
-	   result, BAR_IGU_INTMEM + igu_addr);
+	DP(BNX2X_MSG_OFF, "read 0x%08x from HC addr 0x%x\n",
+	   result, hc_addr);
 
-#ifdef IGU_DEBUG
-#warning IGU_DEBUG active
-	if (result == 0) {
-		BNX2X_ERR("read %x from IGU\n", result);
-		REG_WR(bp, TM_REG_TIMER_SOFT_RST, 0);
-	}
-#endif
 	return result;
 }
 
@@ -898,6 +876,7 @@ static void bnx2x_tx_int(struct bnx2x_fastpath *fp, int work)
 		netif_tx_lock(bp->dev);
 
 		if (netif_queue_stopped(bp->dev) &&
+		    (bp->state == BNX2X_STATE_OPEN) &&
 		    (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3))
 			netif_wake_queue(bp->dev);
 
@@ -905,6 +884,7 @@ static void bnx2x_tx_int(struct bnx2x_fastpath *fp, int work)
 	}
 }
 
+
 static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
 			   union eth_rx_cqe *rr_cqe)
 {
@@ -960,6 +940,7 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
 		bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED;
 		break;
 
+
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_DIAG):
 		DP(NETIF_MSG_IFUP, "got set mac ramrod\n");
@@ -1046,7 +1027,7 @@ static inline int bnx2x_alloc_rx_skb(struct bnx2x *bp,
 	if (unlikely(skb == NULL))
 		return -ENOMEM;
 
-	mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size,
+	mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_size,
 				 PCI_DMA_FROMDEVICE);
 	if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 		dev_kfree_skb(skb);
@@ -1169,8 +1150,8 @@ static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp)
 	memset(fp->sge_mask, 0xff,
 	       (NUM_RX_SGE >> RX_SGE_MASK_ELEM_SHIFT)*sizeof(u64));
 
-	/* Clear the two last indeces in the page to 1:
-	   these are the indeces that correspond to the "next" element,
+	/* Clear the two last indices in the page to 1:
+	   these are the indices that correspond to the "next" element,
 	   hence will never be indicated and should be removed from
 	   the calculations. */
 	bnx2x_clear_sge_mask_next_elems(fp);
@@ -1188,7 +1169,7 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
 	/* move empty skb from pool to prod and map it */
 	prod_rx_buf->skb = fp->tpa_pool[queue].skb;
 	mapping = pci_map_single(bp->pdev, fp->tpa_pool[queue].skb->data,
-				 bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+				 bp->rx_buf_size, PCI_DMA_FROMDEVICE);
 	pci_unmap_addr_set(prod_rx_buf, mapping, mapping);
 
 	/* move partial skb from cons to pool (don't unmap yet) */
@@ -1261,7 +1242,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		   where we are and drop the whole packet */
 		err = bnx2x_alloc_rx_sge(bp, fp, sge_idx);
 		if (unlikely(err)) {
-			fp->rx_alloc_failed++;
+			bp->eth_stats.rx_skb_alloc_failed++;
 			return err;
 		}
 
@@ -1295,16 +1276,15 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	   pool entry status to BNX2X_TPA_STOP even if new skb allocation
 	   fails. */
 	pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping),
-			 bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+			 bp->rx_buf_size, PCI_DMA_FROMDEVICE);
 
-	/* if alloc failed drop the packet and keep the buffer in the bin */
 	if (likely(new_skb)) {
+		/* fix ip xsum and give it to the stack */
+		/* (no need to map the new skb) */
 
 		prefetch(skb);
 		prefetch(((char *)(skb)) + 128);
 
-		/* else fix ip xsum and give it to the stack */
-		/* (no need to map the new skb) */
 #ifdef BNX2X_STOP_ON_ERROR
 		if (pad + len > bp->rx_buf_size) {
 			BNX2X_ERR("skb_put is about to fail...  "
@@ -1353,9 +1333,10 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		fp->tpa_pool[queue].skb = new_skb;
 
 	} else {
+		/* else drop the packet and keep the buffer in the bin */
 		DP(NETIF_MSG_RX_STATUS,
 		   "Failed to allocate new skb - dropping packet!\n");
-		fp->rx_alloc_failed++;
+		bp->eth_stats.rx_skb_alloc_failed++;
 	}
 
 	fp->tpa_state[queue] = BNX2X_TPA_STOP;
@@ -1390,7 +1371,6 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 	u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
 	u16 hw_comp_cons, sw_comp_cons, sw_comp_prod;
 	int rx_pkt = 0;
-	u16 queue;
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
@@ -1456,7 +1436,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 			if ((!fp->disable_tpa) &&
 			    (TPA_TYPE(cqe_fp_flags) !=
 					(TPA_TYPE_START | TPA_TYPE_END))) {
-				queue = cqe->fast_path_cqe.queue_index;
+				u16 queue = cqe->fast_path_cqe.queue_index;
 
 				if (TPA_TYPE(cqe_fp_flags) == TPA_TYPE_START) {
 					DP(NETIF_MSG_RX_STATUS,
@@ -1503,11 +1483,10 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 
 			/* is this an error packet? */
 			if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
-			/* do we sometimes forward error packets anyway? */
 				DP(NETIF_MSG_RX_ERR,
 				   "ERROR  flags %x  rx packet %u\n",
 				   cqe_fp_flags, sw_comp_cons);
-				/* TBD make sure MC counts this as a drop */
+				bp->eth_stats.rx_err_discard_pkt++;
 				goto reuse_rx;
 			}
 
@@ -1524,7 +1503,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 					DP(NETIF_MSG_RX_ERR,
 					   "ERROR  packet dropped "
 					   "because of alloc failure\n");
-					fp->rx_alloc_failed++;
+					bp->eth_stats.rx_skb_alloc_failed++;
 					goto reuse_rx;
 				}
 
@@ -1541,7 +1520,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 			} else if (bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0) {
 				pci_unmap_single(bp->pdev,
 					pci_unmap_addr(rx_buf, mapping),
-						 bp->rx_buf_use_size,
+						 bp->rx_buf_size,
 						 PCI_DMA_FROMDEVICE);
 				skb_reserve(skb, pad);
 				skb_put(skb, len);
@@ -1550,7 +1529,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 				DP(NETIF_MSG_RX_ERR,
 				   "ERROR  packet dropped because "
 				   "of alloc failure\n");
-				fp->rx_alloc_failed++;
+				bp->eth_stats.rx_skb_alloc_failed++;
 reuse_rx:
 				bnx2x_reuse_rx_skb(fp, skb, bd_cons, bd_prod);
 				goto next_rx;
@@ -1559,10 +1538,12 @@ reuse_rx:
 			skb->protocol = eth_type_trans(skb, bp->dev);
 
 			skb->ip_summed = CHECKSUM_NONE;
-			if (bp->rx_csum && BNX2X_RX_SUM_OK(cqe))
-				skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-			/* TBD do we pass bad csum packets in promisc */
+			if (bp->rx_csum) {
+				if (likely(BNX2X_RX_CSUM_OK(cqe)))
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+				else
+					bp->eth_stats.hw_csum_err++;
+			}
 		}
 
 #ifdef BCM_VLAN
@@ -1615,6 +1596,12 @@ static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie)
 	struct net_device *dev = bp->dev;
 	int index = FP_IDX(fp);
 
+	/* Return here if interrupt is disabled */
+	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
+		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
+		return IRQ_HANDLED;
+	}
+
 	DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB [%d:%d]\n",
 	   index, FP_SB_ID(fp));
 	bnx2x_ack_sb(bp, FP_SB_ID(fp), USTORM_ID, 0, IGU_INT_DISABLE, 0);
@@ -1648,17 +1635,17 @@ static irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
 	}
 	DP(NETIF_MSG_INTR, "got an interrupt  status %u\n", status);
 
-#ifdef BNX2X_STOP_ON_ERROR
-	if (unlikely(bp->panic))
-		return IRQ_HANDLED;
-#endif
-
 	/* Return here if interrupt is disabled */
 	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
 		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
 		return IRQ_HANDLED;
 	}
 
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return IRQ_HANDLED;
+#endif
+
 	mask = 0x2 << bp->fp[0].sb_id;
 	if (status & mask) {
 		struct bnx2x_fastpath *fp = &bp->fp[0];
@@ -1699,11 +1686,12 @@ static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event);
  * General service functions
  */
 
-static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
+static int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource)
 {
 	u32 lock_status;
 	u32 resource_bit = (1 << resource);
-	u8 port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
+	u32 hw_lock_control_reg;
 	int cnt;
 
 	/* Validating that the resource is within range */
@@ -1714,20 +1702,26 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
 		return -EINVAL;
 	}
 
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+	} else {
+		hw_lock_control_reg =
+				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+	}
+
 	/* Validating that the resource is not already taken */
-	lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+	lock_status = REG_RD(bp, hw_lock_control_reg);
 	if (lock_status & resource_bit) {
 		DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
 		   lock_status, resource_bit);
 		return -EEXIST;
 	}
 
-	/* Try for 1 second every 5ms */
-	for (cnt = 0; cnt < 200; cnt++) {
+	/* Try for 5 second every 5ms */
+	for (cnt = 0; cnt < 1000; cnt++) {
 		/* Try to acquire the lock */
-		REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8 + 4,
-		       resource_bit);
-		lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+		REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
+		lock_status = REG_RD(bp, hw_lock_control_reg);
 		if (lock_status & resource_bit)
 			return 0;
 
@@ -1737,11 +1731,12 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
 	return -EAGAIN;
 }
 
-static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
+static int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource)
 {
 	u32 lock_status;
 	u32 resource_bit = (1 << resource);
-	u8 port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
+	u32 hw_lock_control_reg;
 
 	/* Validating that the resource is within range */
 	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
@@ -1751,20 +1746,27 @@ static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
 		return -EINVAL;
 	}
 
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+	} else {
+		hw_lock_control_reg =
+				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+	}
+
 	/* Validating that the resource is currently taken */
-	lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+	lock_status = REG_RD(bp, hw_lock_control_reg);
 	if (!(lock_status & resource_bit)) {
 		DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
 		   lock_status, resource_bit);
 		return -EFAULT;
 	}
 
-	REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8, resource_bit);
+	REG_WR(bp, hw_lock_control_reg, resource_bit);
 	return 0;
 }
 
 /* HW Lock for shared dual port PHYs */
-static void bnx2x_phy_hw_lock(struct bnx2x *bp)
+static void bnx2x_acquire_phy_lock(struct bnx2x *bp)
 {
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
 
@@ -1772,25 +1774,25 @@ static void bnx2x_phy_hw_lock(struct bnx2x *bp)
 
 	if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
 	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
-		bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
 }
 
-static void bnx2x_phy_hw_unlock(struct bnx2x *bp)
+static void bnx2x_release_phy_lock(struct bnx2x *bp)
 {
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
 
 	if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
 	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
-		bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
 
 	mutex_unlock(&bp->port.phy_mutex);
 }
 
-int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
 {
 	/* The GPIO should be swapped if swap register is set and active */
 	int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
-			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ BP_PORT(bp);
+			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
 	int gpio_shift = gpio_num +
 			(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
 	u32 gpio_mask = (1 << gpio_shift);
@@ -1801,7 +1803,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
 		return -EINVAL;
 	}
 
-	bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
 	/* read GPIO and mask except the float bits */
 	gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
 
@@ -1822,7 +1824,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
 		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
 		break;
 
-	case MISC_REGISTERS_GPIO_INPUT_HI_Z :
+	case MISC_REGISTERS_GPIO_INPUT_HI_Z:
 		DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
 		   gpio_num, gpio_shift);
 		/* set FLOAT */
@@ -1834,7 +1836,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
 	}
 
 	REG_WR(bp, MISC_REG_GPIO, gpio_reg);
-	bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
 
 	return 0;
 }
@@ -1850,19 +1852,19 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
 		return -EINVAL;
 	}
 
-	bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
 	/* read SPIO and mask except the float bits */
 	spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
 
 	switch (mode) {
-	case MISC_REGISTERS_SPIO_OUTPUT_LOW :
+	case MISC_REGISTERS_SPIO_OUTPUT_LOW:
 		DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
 		/* clear FLOAT and set CLR */
 		spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
 		spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
 		break;
 
-	case MISC_REGISTERS_SPIO_OUTPUT_HIGH :
+	case MISC_REGISTERS_SPIO_OUTPUT_HIGH:
 		DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
 		/* clear FLOAT and set SET */
 		spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
@@ -1880,7 +1882,7 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
 	}
 
 	REG_WR(bp, MISC_REG_SPIO, spio_reg);
-	bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
 
 	return 0;
 }
@@ -1940,46 +1942,63 @@ static void bnx2x_link_report(struct bnx2x *bp)
 
 static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
 {
-	u8 rc;
+	if (!BP_NOMCP(bp)) {
+		u8 rc;
 
-	/* Initialize link parameters structure variables */
-	bp->link_params.mtu = bp->dev->mtu;
+		/* Initialize link parameters structure variables */
+		/* It is recommended to turn off RX FC for jumbo frames
+		   for better performance */
+		if (IS_E1HMF(bp))
+			bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
+		else if (bp->dev->mtu > 5000)
+			bp->link_params.req_fc_auto_adv = FLOW_CTRL_TX;
+		else
+			bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
 
-	bnx2x_phy_hw_lock(bp);
-	rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+		bnx2x_acquire_phy_lock(bp);
+		rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+		bnx2x_release_phy_lock(bp);
 
-	if (bp->link_vars.link_up)
-		bnx2x_link_report(bp);
+		if (bp->link_vars.link_up)
+			bnx2x_link_report(bp);
 
-	bnx2x_calc_fc_adv(bp);
+		bnx2x_calc_fc_adv(bp);
 
-	return rc;
+		return rc;
+	}
+	BNX2X_ERR("Bootcode is missing -not initializing link\n");
+	return -EINVAL;
 }
 
 static void bnx2x_link_set(struct bnx2x *bp)
 {
-	bnx2x_phy_hw_lock(bp);
-	bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+		bnx2x_release_phy_lock(bp);
 
-	bnx2x_calc_fc_adv(bp);
+		bnx2x_calc_fc_adv(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing -not setting link\n");
 }
 
 static void bnx2x__link_reset(struct bnx2x *bp)
 {
-	bnx2x_phy_hw_lock(bp);
-	bnx2x_link_reset(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_link_reset(&bp->link_params, &bp->link_vars);
+		bnx2x_release_phy_lock(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing -not resetting link\n");
 }
 
 static u8 bnx2x_link_test(struct bnx2x *bp)
 {
 	u8 rc;
 
-	bnx2x_phy_hw_lock(bp);
+	bnx2x_acquire_phy_lock(bp);
 	rc = bnx2x_test_link(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	bnx2x_release_phy_lock(bp);
 
 	return rc;
 }
@@ -1991,7 +2010,7 @@ static u8 bnx2x_link_test(struct bnx2x *bp)
      sum of vn_min_rates
        or
      0 - if all the min_rates are 0.
-     In the later case fainess algorithm should be deactivated.
+     In the later case fairness algorithm should be deactivated.
      If not all min_rates are zero then those that are zeroes will
      be set to 1.
  */
@@ -2114,7 +2133,7 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func,
 				FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
 		/* If FAIRNESS is enabled (not all min rates are zeroes) and
 		   if current min rate is zero - set it to 1.
-		   This is a requirment of the algorithm. */
+		   This is a requirement of the algorithm. */
 		if ((vn_min_rate == 0) && wsum)
 			vn_min_rate = DEF_MIN_RATE;
 		vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
@@ -2203,9 +2222,9 @@ static void bnx2x_link_attn(struct bnx2x *bp)
 	/* Make sure that we are synced with the current statistics */
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	bnx2x_phy_hw_lock(bp);
+	bnx2x_acquire_phy_lock(bp);
 	bnx2x_link_update(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	bnx2x_release_phy_lock(bp);
 
 	if (bp->link_vars.link_up) {
 
@@ -2357,7 +2376,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
 }
 
 /* acquire split MCP access lock register */
-static int bnx2x_lock_alr(struct bnx2x *bp)
+static int bnx2x_acquire_alr(struct bnx2x *bp)
 {
 	u32 i, j, val;
 	int rc = 0;
@@ -2374,15 +2393,15 @@ static int bnx2x_lock_alr(struct bnx2x *bp)
 		msleep(5);
 	}
 	if (!(val & (1L << 31))) {
-		BNX2X_ERR("Cannot acquire nvram interface\n");
+		BNX2X_ERR("Cannot acquire MCP access lock register\n");
 		rc = -EBUSY;
 	}
 
 	return rc;
 }
 
-/* Release split MCP access lock register */
-static void bnx2x_unlock_alr(struct bnx2x *bp)
+/* release split MCP access lock register */
+static void bnx2x_release_alr(struct bnx2x *bp)
 {
 	u32 val = 0;
 
@@ -2395,7 +2414,6 @@ static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
 	u16 rc = 0;
 
 	barrier(); /* status block is written to by the chip */
-
 	if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
 		bp->def_att_idx = def_sb->atten_status_block.attn_bits_index;
 		rc |= 1;
@@ -2426,26 +2444,31 @@ static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
 static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 {
 	int port = BP_PORT(bp);
-	int func = BP_FUNC(bp);
-	u32 igu_addr = (IGU_ADDR_ATTN_BITS_SET + IGU_FUNC_BASE * func) * 8;
+	u32 hc_addr = (HC_REG_COMMAND_REG + port*32 +
+		       COMMAND_REG_ATTN_BITS_SET);
 	u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
 			      MISC_REG_AEU_MASK_ATTN_FUNC_0;
 	u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
 				       NIG_REG_MASK_INTERRUPT_PORT0;
+	u32 aeu_mask;
 
-	if (~bp->aeu_mask & (asserted & 0xff))
-		BNX2X_ERR("IGU ERROR\n");
 	if (bp->attn_state & asserted)
 		BNX2X_ERR("IGU ERROR\n");
 
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+	aeu_mask = REG_RD(bp, aeu_addr);
+
 	DP(NETIF_MSG_HW, "aeu_mask %x  newly asserted %x\n",
-	   bp->aeu_mask, asserted);
-	bp->aeu_mask &= ~(asserted & 0xff);
-	DP(NETIF_MSG_HW, "after masking: aeu_mask %x\n", bp->aeu_mask);
+	   aeu_mask, asserted);
+	aeu_mask &= ~(asserted & 0xff);
+	DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
 
-	REG_WR(bp, aeu_addr, bp->aeu_mask);
+	REG_WR(bp, aeu_addr, aeu_mask);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
 
+	DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
 	bp->attn_state |= asserted;
+	DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
 
 	if (asserted & ATTN_HARD_WIRED_MASK) {
 		if (asserted & ATTN_NIG_FOR_FUNC) {
@@ -2500,9 +2523,9 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 
 	} /* if hardwired */
 
-	DP(NETIF_MSG_HW, "about to mask 0x%08x at IGU addr 0x%x\n",
-	   asserted, BAR_IGU_INTMEM + igu_addr);
-	REG_WR(bp, BAR_IGU_INTMEM + igu_addr, asserted);
+	DP(NETIF_MSG_HW, "about to mask 0x%08x at HC addr 0x%x\n",
+	   asserted, hc_addr);
+	REG_WR(bp, hc_addr, asserted);
 
 	/* now set back the mask */
 	if (asserted & ATTN_NIG_FOR_FUNC)
@@ -2527,15 +2550,16 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
 		BNX2X_ERR("SPIO5 hw attention\n");
 
 		switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+		case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
 		case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
 			/* Fan failure attention */
 
-			/* The PHY reset is controled by GPIO 1 */
+			/* The PHY reset is controlled by GPIO 1 */
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
-			/* Low power mode is controled by GPIO 2 */
+				       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+			/* Low power mode is controlled by GPIO 2 */
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+				       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
 			/* mark the failure */
 			bp->link_params.ext_phy_config &=
 					~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
@@ -2699,10 +2723,11 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
 	int index;
 	u32 reg_addr;
 	u32 val;
+	u32 aeu_mask;
 
 	/* need to take HW lock because MCP or other port might also
 	   try to handle this event */
-	bnx2x_lock_alr(bp);
+	bnx2x_acquire_alr(bp);
 
 	attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
 	attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
@@ -2734,32 +2759,35 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
 						HW_PRTY_ASSERT_SET_1) ||
 			    (attn.sig[2] & group_mask.sig[2] &
 						HW_PRTY_ASSERT_SET_2))
-			       BNX2X_ERR("FATAL HW block parity attention\n");
+				BNX2X_ERR("FATAL HW block parity attention\n");
 		}
 	}
 
-	bnx2x_unlock_alr(bp);
+	bnx2x_release_alr(bp);
 
-	reg_addr = (IGU_ADDR_ATTN_BITS_CLR + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
+	reg_addr = (HC_REG_COMMAND_REG + port*32 + COMMAND_REG_ATTN_BITS_CLR);
 
 	val = ~deasserted;
-/*	DP(NETIF_MSG_INTR, "write 0x%08x to IGU addr 0x%x\n",
-	   val, BAR_IGU_INTMEM + reg_addr); */
-	REG_WR(bp, BAR_IGU_INTMEM + reg_addr, val);
+	DP(NETIF_MSG_HW, "about to mask 0x%08x at HC addr 0x%x\n",
+	   val, reg_addr);
+	REG_WR(bp, reg_addr, val);
 
-	if (bp->aeu_mask & (deasserted & 0xff))
-		BNX2X_ERR("IGU BUG!\n");
 	if (~bp->attn_state & deasserted)
-		BNX2X_ERR("IGU BUG!\n");
+		BNX2X_ERR("IGU ERROR\n");
 
 	reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
 			  MISC_REG_AEU_MASK_ATTN_FUNC_0;
 
-	DP(NETIF_MSG_HW, "aeu_mask %x\n", bp->aeu_mask);
-	bp->aeu_mask |= (deasserted & 0xff);
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+	aeu_mask = REG_RD(bp, reg_addr);
 
-	DP(NETIF_MSG_HW, "new mask %x\n", bp->aeu_mask);
-	REG_WR(bp, reg_addr, bp->aeu_mask);
+	DP(NETIF_MSG_HW, "aeu_mask %x  newly deasserted %x\n",
+	   aeu_mask, deasserted);
+	aeu_mask |= (deasserted & 0xff);
+	DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
+
+	REG_WR(bp, reg_addr, aeu_mask);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
 
 	DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
 	bp->attn_state &= ~deasserted;
@@ -2800,7 +2828,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 
 	/* Return here if interrupt is disabled */
 	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-		DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
+		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
 		return;
 	}
 
@@ -2808,7 +2836,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 /*	if (status == 0)				     */
 /*		BNX2X_ERR("spurious slowpath interrupt!\n"); */
 
-	DP(BNX2X_MSG_SP, "got a slowpath interrupt (updated %x)\n", status);
+	DP(NETIF_MSG_INTR, "got a slowpath interrupt (updated %x)\n", status);
 
 	/* HW attentions */
 	if (status & 0x1)
@@ -2838,7 +2866,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 
 	/* Return here if interrupt is disabled */
 	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-		DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
+		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
 		return IRQ_HANDLED;
 	}
 
@@ -2876,11 +2904,11 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 			/* underflow */ \
 			d_hi = m_hi - s_hi; \
 			if (d_hi > 0) { \
-			/* we can 'loan' 1 */ \
+				/* we can 'loan' 1 */ \
 				d_hi--; \
 				d_lo = m_lo + (UINT_MAX - s_lo) + 1; \
 			} else { \
-			/* m_hi <= s_hi */ \
+				/* m_hi <= s_hi */ \
 				d_hi = 0; \
 				d_lo = 0; \
 			} \
@@ -2890,7 +2918,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 				d_hi = 0; \
 				d_lo = 0; \
 			} else { \
-			/* m_hi >= s_hi */ \
+				/* m_hi >= s_hi */ \
 				d_hi = m_hi - s_hi; \
 				d_lo = m_lo - s_lo; \
 			} \
@@ -2963,37 +2991,6 @@ static inline long bnx2x_hilo(u32 *hiref)
  * Init service functions
  */
 
-static void bnx2x_storm_stats_init(struct bnx2x *bp)
-{
-	int func = BP_FUNC(bp);
-
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func), 1);
-	REG_WR(bp, BAR_XSTRORM_INTMEM +
-	       XSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func), 1);
-	REG_WR(bp, BAR_TSTRORM_INTMEM +
-	       TSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func), 0);
-	REG_WR(bp, BAR_CSTRORM_INTMEM +
-	       CSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-	REG_WR(bp, BAR_XSTRORM_INTMEM +
-	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
-	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
-	REG_WR(bp, BAR_XSTRORM_INTMEM +
-	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
-	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
-
-	REG_WR(bp, BAR_TSTRORM_INTMEM +
-	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
-	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
-	REG_WR(bp, BAR_TSTRORM_INTMEM +
-	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
-	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
-}
-
 static void bnx2x_storm_stats_post(struct bnx2x *bp)
 {
 	if (!bp->stats_pending) {
@@ -3032,6 +3029,8 @@ static void bnx2x_stats_init(struct bnx2x *bp)
 	memset(&(bp->port.old_nig_stats), 0, sizeof(struct nig_stats));
 	bp->port.old_nig_stats.brb_discard =
 			REG_RD(bp, NIG_REG_STAT0_BRB_DISCARD + port*0x38);
+	bp->port.old_nig_stats.brb_truncate =
+			REG_RD(bp, NIG_REG_STAT0_BRB_TRUNCATE + port*0x38);
 	REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT0 + port*0x50,
 		    &(bp->port.old_nig_stats.egress_mac_pkt0_lo), 2);
 	REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT1 + port*0x50,
@@ -3101,12 +3100,12 @@ static int bnx2x_stats_comp(struct bnx2x *bp)
 
 	might_sleep();
 	while (*stats_comp != DMAE_COMP_VAL) {
-		msleep(1);
 		if (!cnt) {
 			BNX2X_ERR("timeout waiting for stats finished\n");
 			break;
 		}
 		cnt--;
+		msleep(1);
 	}
 	return 1;
 }
@@ -3451,8 +3450,7 @@ static void bnx2x_bmac_stats_update(struct bnx2x *bp)
 	UPDATE_STAT64(rx_stat_grovr, rx_stat_dot3statsframestoolong);
 	UPDATE_STAT64(rx_stat_grfrg, rx_stat_etherstatsfragments);
 	UPDATE_STAT64(rx_stat_grjbr, rx_stat_etherstatsjabbers);
-	UPDATE_STAT64(rx_stat_grxpf, rx_stat_bmac_xpf);
-	UPDATE_STAT64(rx_stat_grxcf, rx_stat_bmac_xcf);
+	UPDATE_STAT64(rx_stat_grxcf, rx_stat_maccontrolframesreceived);
 	UPDATE_STAT64(rx_stat_grxpf, rx_stat_xoffstateentered);
 	UPDATE_STAT64(rx_stat_grxpf, rx_stat_xoffpauseframesreceived);
 	UPDATE_STAT64(tx_stat_gtxpf, tx_stat_outxoffsent);
@@ -3536,6 +3534,8 @@ static int bnx2x_hw_stats_update(struct bnx2x *bp)
 
 	ADD_EXTEND_64(pstats->brb_drop_hi, pstats->brb_drop_lo,
 		      new->brb_discard - old->brb_discard);
+	ADD_EXTEND_64(estats->brb_truncate_hi, estats->brb_truncate_lo,
+		      new->brb_truncate - old->brb_truncate);
 
 	UPDATE_STAT64_NIG(egress_mac_pkt0,
 					etherstatspkts1024octetsto1522octets);
@@ -3713,8 +3713,7 @@ static void bnx2x_net_stats_update(struct bnx2x *bp)
 	nstats->rx_length_errors =
 				estats->rx_stat_etherstatsundersizepkts_lo +
 				estats->jabber_packets_received;
-	nstats->rx_over_errors = estats->brb_drop_lo +
-				 estats->brb_truncate_discard;
+	nstats->rx_over_errors = estats->brb_drop_lo + estats->brb_truncate_lo;
 	nstats->rx_crc_errors = estats->rx_stat_dot3statsfcserrors_lo;
 	nstats->rx_frame_errors = estats->rx_stat_dot3statsalignmenterrors_lo;
 	nstats->rx_fifo_errors = old_tclient->no_buff_discard;
@@ -3783,7 +3782,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 			     bp->fp->rx_comp_cons),
 		       le16_to_cpu(*bp->fp->rx_cons_sb), nstats->rx_packets);
 		printk(KERN_DEBUG "  %s (Xoff events %u)  brb drops %u\n",
-		       netif_queue_stopped(bp->dev)? "Xoff" : "Xon",
+		       netif_queue_stopped(bp->dev) ? "Xoff" : "Xon",
 		       estats->driver_xoff, estats->brb_drop_lo);
 		printk(KERN_DEBUG "tstats: checksum_discard %u  "
 			"packets_too_big_discard %u  no_buff_discard %u  "
@@ -3994,14 +3993,14 @@ static void bnx2x_zero_sb(struct bnx2x *bp, int sb_id)
 
 	bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
 			USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
-			sizeof(struct ustorm_def_status_block)/4);
+			sizeof(struct ustorm_status_block)/4);
 	bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
 			CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
-			sizeof(struct cstorm_def_status_block)/4);
+			sizeof(struct cstorm_status_block)/4);
 }
 
-static void bnx2x_init_sb(struct bnx2x *bp, int sb_id,
-			  struct host_status_block *sb,	dma_addr_t mapping)
+static void bnx2x_init_sb(struct bnx2x *bp, struct host_status_block *sb,
+			  dma_addr_t mapping, int sb_id)
 {
 	int port = BP_PORT(bp);
 	int func = BP_FUNC(bp);
@@ -4077,7 +4076,6 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    atten_status_block);
 	def_sb->atten_status_block.status_block_id = sb_id;
 
-	bp->def_att_idx = 0;
 	bp->attn_state = 0;
 
 	reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
@@ -4094,9 +4092,6 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					       reg_offset + 0xc + 0x10*index);
 	}
 
-	bp->aeu_mask = REG_RD(bp, (port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
-					  MISC_REG_AEU_MASK_ATTN_FUNC_0));
-
 	reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L :
 			     HC_REG_ATTN_MSG0_ADDR_L);
 
@@ -4114,17 +4109,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    u_def_status_block);
 	def_sb->u_def_status_block.status_block_id = sb_id;
 
-	bp->def_u_idx = 0;
-
 	REG_WR(bp, BAR_USTRORM_INTMEM +
 	       USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_USTRORM_INTMEM +
 	       ((USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_USTRORM_INTMEM +  DEF_USB_FUNC_OFF +
+	REG_WR8(bp, BAR_USTRORM_INTMEM + DEF_USB_FUNC_OFF +
 		USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_USTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
@@ -4135,17 +4126,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    c_def_status_block);
 	def_sb->c_def_status_block.status_block_id = sb_id;
 
-	bp->def_c_idx = 0;
-
 	REG_WR(bp, BAR_CSTRORM_INTMEM +
 	       CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_CSTRORM_INTMEM +
 	       ((CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_CSTRORM_INTMEM +  DEF_CSB_FUNC_OFF +
+	REG_WR8(bp, BAR_CSTRORM_INTMEM + DEF_CSB_FUNC_OFF +
 		CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_CSTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
@@ -4156,17 +4143,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    t_def_status_block);
 	def_sb->t_def_status_block.status_block_id = sb_id;
 
-	bp->def_t_idx = 0;
-
 	REG_WR(bp, BAR_TSTRORM_INTMEM +
 	       TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_TSTRORM_INTMEM +
 	       ((TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_TSTRORM_INTMEM +  DEF_TSB_FUNC_OFF +
+	REG_WR8(bp, BAR_TSTRORM_INTMEM + DEF_TSB_FUNC_OFF +
 		TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_TSTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_TSTRORM_INTMEM +
@@ -4177,23 +4160,20 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    x_def_status_block);
 	def_sb->x_def_status_block.status_block_id = sb_id;
 
-	bp->def_x_idx = 0;
-
 	REG_WR(bp, BAR_XSTRORM_INTMEM +
 	       XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_XSTRORM_INTMEM +
 	       ((XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_XSTRORM_INTMEM +  DEF_XSB_FUNC_OFF +
+	REG_WR8(bp, BAR_XSTRORM_INTMEM + DEF_XSB_FUNC_OFF +
 		XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_XSTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_XSTRORM_INTMEM +
 			 XSTORM_DEF_SB_HC_DISABLE_OFFSET(func, index), 1);
 
 	bp->stats_pending = 0;
+	bp->set_mac_pending = 0;
 
 	bnx2x_ack_sb(bp, sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
 }
@@ -4209,21 +4189,25 @@ static void bnx2x_update_coalesce(struct bnx2x *bp)
 		/* HC_INDEX_U_ETH_RX_CQ_CONS */
 		REG_WR8(bp, BAR_USTRORM_INTMEM +
 			USTORM_SB_HC_TIMEOUT_OFFSET(port, sb_id,
-						   HC_INDEX_U_ETH_RX_CQ_CONS),
+						    U_SB_ETH_RX_CQ_INDEX),
 			bp->rx_ticks/12);
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
 			 USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
-						   HC_INDEX_U_ETH_RX_CQ_CONS),
+						     U_SB_ETH_RX_CQ_INDEX),
+			 bp->rx_ticks ? 0 : 1);
+		REG_WR16(bp, BAR_USTRORM_INTMEM +
+			 USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
+						     U_SB_ETH_RX_BD_INDEX),
 			 bp->rx_ticks ? 0 : 1);
 
 		/* HC_INDEX_C_ETH_TX_CQ_CONS */
 		REG_WR8(bp, BAR_CSTRORM_INTMEM +
 			CSTORM_SB_HC_TIMEOUT_OFFSET(port, sb_id,
-						   HC_INDEX_C_ETH_TX_CQ_CONS),
+						    C_SB_ETH_TX_CQ_INDEX),
 			bp->tx_ticks/12);
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
 			 CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
-						   HC_INDEX_C_ETH_TX_CQ_CONS),
+						     C_SB_ETH_TX_CQ_INDEX),
 			 bp->tx_ticks ? 0 : 1);
 	}
 }
@@ -4245,7 +4229,7 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
 		if (fp->tpa_state[i] == BNX2X_TPA_START)
 			pci_unmap_single(bp->pdev,
 					 pci_unmap_addr(rx_buf, mapping),
-					 bp->rx_buf_use_size,
+					 bp->rx_buf_size,
 					 PCI_DMA_FROMDEVICE);
 
 		dev_kfree_skb(skb);
@@ -4256,23 +4240,24 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
 static void bnx2x_init_rx_rings(struct bnx2x *bp)
 {
 	int func = BP_FUNC(bp);
-	u16 ring_prod, cqe_ring_prod = 0;
+	int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
+					      ETH_MAX_AGGREGATION_QUEUES_E1H;
+	u16 ring_prod, cqe_ring_prod;
 	int i, j;
 
-	bp->rx_buf_use_size = bp->dev->mtu;
-	bp->rx_buf_use_size += bp->rx_offset + ETH_OVREHEAD;
-	bp->rx_buf_size = bp->rx_buf_use_size + 64;
+	bp->rx_buf_size = bp->dev->mtu;
+	bp->rx_buf_size += bp->rx_offset + ETH_OVREHEAD +
+		BCM_RX_ETH_PAYLOAD_ALIGN;
 
 	if (bp->flags & TPA_ENABLE_FLAG) {
 		DP(NETIF_MSG_IFUP,
-		   "rx_buf_use_size %d  rx_buf_size %d  effective_mtu %d\n",
-		   bp->rx_buf_use_size, bp->rx_buf_size,
-		   bp->dev->mtu + ETH_OVREHEAD);
+		   "rx_buf_size %d  effective_mtu %d\n",
+		   bp->rx_buf_size, bp->dev->mtu + ETH_OVREHEAD);
 
 		for_each_queue(bp, j) {
-			for (i = 0; i < ETH_MAX_AGGREGATION_QUEUES_E1H; i++) {
-				struct bnx2x_fastpath *fp = &bp->fp[j];
+			struct bnx2x_fastpath *fp = &bp->fp[j];
 
+			for (i = 0; i < max_agg_queues; i++) {
 				fp->tpa_pool[i].skb =
 				   netdev_alloc_skb(bp->dev, bp->rx_buf_size);
 				if (!fp->tpa_pool[i].skb) {
@@ -4352,8 +4337,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
 				BNX2X_ERR("disabling TPA for queue[%d]\n", j);
 				/* Cleanup already allocated elements */
 				bnx2x_free_rx_sge_range(bp, fp, ring_prod);
-				bnx2x_free_tpa_pool(bp, fp,
-					      ETH_MAX_AGGREGATION_QUEUES_E1H);
+				bnx2x_free_tpa_pool(bp, fp, max_agg_queues);
 				fp->disable_tpa = 1;
 				ring_prod = 0;
 				break;
@@ -4363,13 +4347,13 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
 		fp->rx_sge_prod = ring_prod;
 
 		/* Allocate BDs and initialize BD ring */
-		fp->rx_comp_cons = fp->rx_alloc_failed = 0;
+		fp->rx_comp_cons = 0;
 		cqe_ring_prod = ring_prod = 0;
 		for (i = 0; i < bp->rx_ring_size; i++) {
 			if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) {
 				BNX2X_ERR("was only able to allocate "
 					  "%d rx skbs\n", i);
-				fp->rx_alloc_failed++;
+				bp->eth_stats.rx_skb_alloc_failed++;
 				break;
 			}
 			ring_prod = NEXT_RX_IDX(ring_prod);
@@ -4477,9 +4461,10 @@ static void bnx2x_init_context(struct bnx2x *bp)
 		context->ustorm_st_context.common.status_block_id = sb_id;
 		context->ustorm_st_context.common.flags =
 			USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT;
-		context->ustorm_st_context.common.mc_alignment_size = 64;
+		context->ustorm_st_context.common.mc_alignment_size =
+			BCM_RX_ETH_PAYLOAD_ALIGN;
 		context->ustorm_st_context.common.bd_buff_size =
-						bp->rx_buf_use_size;
+						bp->rx_buf_size;
 		context->ustorm_st_context.common.bd_page_base_hi =
 						U64_HI(fp->rx_desc_mapping);
 		context->ustorm_st_context.common.bd_page_base_lo =
@@ -4497,7 +4482,7 @@ static void bnx2x_init_context(struct bnx2x *bp)
 		}
 
 		context->cstorm_st_context.sb_index_number =
-						HC_INDEX_C_ETH_TX_CQ_CONS;
+						C_SB_ETH_TX_CQ_INDEX;
 		context->cstorm_st_context.status_block_id = sb_id;
 
 		context->xstorm_ag_context.cdu_reserved =
@@ -4535,7 +4520,7 @@ static void bnx2x_set_client_config(struct bnx2x *bp)
 	int i;
 
 	tstorm_client.mtu = bp->dev->mtu + ETH_OVREHEAD;
-	tstorm_client.statistics_counter_id = 0;
+	tstorm_client.statistics_counter_id = BP_CL_ID(bp);
 	tstorm_client.config_flags =
 				TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
 #ifdef BCM_VLAN
@@ -4579,7 +4564,7 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 	int func = BP_FUNC(bp);
 	int i;
 
-	DP(NETIF_MSG_RX_STATUS, "rx mode is %d\n", mode);
+	DP(NETIF_MSG_IFUP, "rx mode %d  mask 0x%x\n", mode, mask);
 
 	switch (mode) {
 	case BNX2X_RX_MODE_NONE: /* no Rx */
@@ -4617,13 +4602,46 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 		bnx2x_set_client_config(bp);
 }
 
-static void bnx2x_init_internal(struct bnx2x *bp)
+static void bnx2x_init_internal_common(struct bnx2x *bp)
+{
+	int i;
+
+	if (bp->flags & TPA_ENABLE_FLAG) {
+		struct tstorm_eth_tpa_exist tpa = {0};
+
+		tpa.tpa_exist = 1;
+
+		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET,
+		       ((u32 *)&tpa)[0]);
+		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET + 4,
+		       ((u32 *)&tpa)[1]);
+	}
+
+	/* Zero this manually as its initialization is
+	   currently missing in the initTool */
+	for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
+		REG_WR(bp, BAR_USTRORM_INTMEM +
+		       USTORM_AGG_DATA_OFFSET + i * 4, 0);
+}
+
+static void bnx2x_init_internal_port(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+
+	REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+}
+
+static void bnx2x_init_internal_func(struct bnx2x *bp)
 {
 	struct tstorm_eth_function_common_config tstorm_config = {0};
 	struct stats_indication_flags stats_flags = {0};
 	int port = BP_PORT(bp);
 	int func = BP_FUNC(bp);
 	int i;
+	u16 max_agg_size;
 
 	if (is_multi(bp)) {
 		tstorm_config.config_flags = MULTI_FLAGS;
@@ -4636,31 +4654,53 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 	       TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(func),
 	       (*(u32 *)&tstorm_config));
 
-/*	DP(NETIF_MSG_IFUP, "tstorm_config: 0x%08x\n",
-	   (*(u32 *)&tstorm_config)); */
-
 	bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */
 	bnx2x_set_storm_rx_mode(bp);
 
+	/* reset xstorm per client statistics */
+	for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++) {
+		REG_WR(bp, BAR_XSTRORM_INTMEM +
+		       XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, BP_CL_ID(bp)) +
+		       i*4, 0);
+	}
+	/* reset tstorm per client statistics */
+	for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++) {
+		REG_WR(bp, BAR_TSTRORM_INTMEM +
+		       TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, BP_CL_ID(bp)) +
+		       i*4, 0);
+	}
+
+	/* Init statistics related context */
 	stats_flags.collect_eth = 1;
 
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port),
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func),
 	       ((u32 *)&stats_flags)[0]);
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port) + 4,
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func) + 4,
 	       ((u32 *)&stats_flags)[1]);
 
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(port),
+	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func),
 	       ((u32 *)&stats_flags)[0]);
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(port) + 4,
+	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func) + 4,
 	       ((u32 *)&stats_flags)[1]);
 
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(port),
+	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func),
 	       ((u32 *)&stats_flags)[0]);
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(port) + 4,
+	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func) + 4,
 	       ((u32 *)&stats_flags)[1]);
 
-/*	DP(NETIF_MSG_IFUP, "stats_flags: 0x%08x 0x%08x\n",
-	   ((u32 *)&stats_flags)[0], ((u32 *)&stats_flags)[1]); */
+	REG_WR(bp, BAR_XSTRORM_INTMEM +
+	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
+	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
+	REG_WR(bp, BAR_XSTRORM_INTMEM +
+	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
+	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
+
+	REG_WR(bp, BAR_TSTRORM_INTMEM +
+	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
+	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
+	REG_WR(bp, BAR_TSTRORM_INTMEM +
+	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
+	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
 
 	if (CHIP_IS_E1H(bp)) {
 		REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNCTION_MODE_OFFSET,
@@ -4676,15 +4716,12 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 			 bp->e1hov);
 	}
 
-	/* Zero this manualy as its initialization is
-	   currently missing in the initTool */
-	for (i = 0; i < USTORM_AGG_DATA_SIZE >> 2; i++)
-		REG_WR(bp, BAR_USTRORM_INTMEM +
-		       USTORM_AGG_DATA_OFFSET + 4*i, 0);
-
+	/* Init CQ ring mapping and aggregation size */
+	max_agg_size = min((u32)(bp->rx_buf_size +
+				 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
+			   (u32)0xffff);
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
-		u16 max_agg_size;
 
 		REG_WR(bp, BAR_USTRORM_INTMEM +
 		       USTORM_CQE_PAGE_BASE_OFFSET(port, FP_CL_ID(fp)),
@@ -4693,16 +4730,34 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 		       USTORM_CQE_PAGE_BASE_OFFSET(port, FP_CL_ID(fp)) + 4,
 		       U64_HI(fp->rx_comp_mapping));
 
-		max_agg_size = min((u32)(bp->rx_buf_use_size +
-					 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
-				   (u32)0xffff);
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
 			 USTORM_MAX_AGG_SIZE_OFFSET(port, FP_CL_ID(fp)),
 			 max_agg_size);
 	}
 }
 
-static void bnx2x_nic_init(struct bnx2x *bp)
+static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
+{
+	switch (load_code) {
+	case FW_MSG_CODE_DRV_LOAD_COMMON:
+		bnx2x_init_internal_common(bp);
+		/* no break */
+
+	case FW_MSG_CODE_DRV_LOAD_PORT:
+		bnx2x_init_internal_port(bp);
+		/* no break */
+
+	case FW_MSG_CODE_DRV_LOAD_FUNCTION:
+		bnx2x_init_internal_func(bp);
+		break;
+
+	default:
+		BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code);
+		break;
+	}
+}
+
+static void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
 {
 	int i;
 
@@ -4717,19 +4772,20 @@ static void bnx2x_nic_init(struct bnx2x *bp)
 		DP(NETIF_MSG_IFUP,
 		   "bnx2x_init_sb(%p,%p) index %d  cl_id %d  sb %d\n",
 		   bp, fp->status_blk, i, FP_CL_ID(fp), FP_SB_ID(fp));
-		bnx2x_init_sb(bp, FP_SB_ID(fp), fp->status_blk,
-			      fp->status_blk_mapping);
+		bnx2x_init_sb(bp, fp->status_blk, fp->status_blk_mapping,
+			      FP_SB_ID(fp));
+		bnx2x_update_fpsb_idx(fp);
 	}
 
-	bnx2x_init_def_sb(bp, bp->def_status_blk,
-			  bp->def_status_blk_mapping, DEF_SB_ID);
+	bnx2x_init_def_sb(bp, bp->def_status_blk, bp->def_status_blk_mapping,
+			  DEF_SB_ID);
+	bnx2x_update_dsb_idx(bp);
 	bnx2x_update_coalesce(bp);
 	bnx2x_init_rx_rings(bp);
 	bnx2x_init_tx_ring(bp);
 	bnx2x_init_sp_ring(bp);
 	bnx2x_init_context(bp);
-	bnx2x_init_internal(bp);
-	bnx2x_storm_stats_init(bp);
+	bnx2x_init_internal(bp, load_code);
 	bnx2x_init_ind_table(bp);
 	bnx2x_int_enable(bp);
 }
@@ -4878,7 +4934,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
 	REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
 	REG_WR(bp, CFC_REG_DEBUG0, 0x1);
-	NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x0);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
 
 	/*  Write 0 to parser credits for CFC search request */
 	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
@@ -4933,7 +4989,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
 	REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
 	REG_WR(bp, CFC_REG_DEBUG0, 0x1);
-	NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x0);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
 
 	/* Write 0 to parser credits for CFC search request */
 	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
@@ -5000,7 +5056,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff);
 	REG_WR(bp, TCM_REG_PRS_IFEN, 0x1);
 	REG_WR(bp, CFC_REG_DEBUG0, 0x0);
-	NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x1);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1);
 
 	DP(NETIF_MSG_HW, "done\n");
 
@@ -5089,11 +5145,6 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
 #endif
 
-#ifndef BCM_ISCSI
-		/* set NIC mode */
-		REG_WR(bp, PRS_REG_NIC_MODE, 1);
-#endif
-
 	REG_WR(bp, PXP2_REG_RQ_CDU_P_SIZE, 2);
 #ifdef BCM_ISCSI
 	REG_WR(bp, PXP2_REG_RQ_TM_P_SIZE, 5);
@@ -5163,6 +5214,8 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	}
 
 	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	/* set NIC mode */
+	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
 
@@ -5296,6 +5349,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	}
 
 	switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
 	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
 		/* Fan failure is indicated by SPIO 5 */
 		bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
@@ -5322,16 +5376,12 @@ static int bnx2x_init_common(struct bnx2x *bp)
 
 	enable_blocks_attention(bp);
 
-	if (bp->flags & TPA_ENABLE_FLAG) {
-		struct tstorm_eth_tpa_exist tmp = {0};
-
-		tmp.tpa_exist = 1;
-
-		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET,
-		       ((u32 *)&tmp)[0]);
-		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET + 4,
-		       ((u32 *)&tmp)[1]);
-	}
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_common_init_phy(bp, bp->common.shmem_base);
+		bnx2x_release_phy_lock(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing - can not initialize link\n");
 
 	return 0;
 }
@@ -5483,6 +5533,7 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	/* Port DMAE comes here */
 
 	switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
 	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
 		/* add SPIO 5 to group 0 */
 		val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
@@ -5638,18 +5689,23 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
 	int func = BP_FUNC(bp);
 	u32 seq = ++bp->fw_seq;
 	u32 rc = 0;
+	u32 cnt = 1;
+	u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
 
 	SHMEM_WR(bp, func_mb[func].drv_mb_header, (command | seq));
 	DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
 
-	/* let the FW do it's magic ... */
-	msleep(100); /* TBD */
+	do {
+		/* let the FW do it's magic ... */
+		msleep(delay);
 
-	if (CHIP_REV_IS_SLOW(bp))
-		msleep(900);
+		rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
 
-	rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
-	DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq);
+		/* Give the FW up to 2 second (200*10ms) */
+	} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 200));
+
+	DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
+	   cnt*delay, rc, seq);
 
 	/* is this a reply to our command? */
 	if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
@@ -5713,6 +5769,7 @@ static void bnx2x_free_mem(struct bnx2x *bp)
 			       NUM_RCQ_BD);
 
 		/* SGE ring */
+		BNX2X_FREE(bnx2x_fp(bp, i, rx_page_ring));
 		BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_sge_ring),
 			       bnx2x_fp(bp, i, rx_sge_mapping),
 			       BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
@@ -5883,14 +5940,15 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp)
 
 			pci_unmap_single(bp->pdev,
 					 pci_unmap_addr(rx_buf, mapping),
-					 bp->rx_buf_use_size,
+					 bp->rx_buf_size,
 					 PCI_DMA_FROMDEVICE);
 
 			rx_buf->skb = NULL;
 			dev_kfree_skb(skb);
 		}
 		if (!fp->disable_tpa)
-			bnx2x_free_tpa_pool(bp, fp,
+			bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
+					    ETH_MAX_AGGREGATION_QUEUES_E1 :
 					    ETH_MAX_AGGREGATION_QUEUES_E1H);
 	}
 }
@@ -5976,8 +6034,8 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
 				 bnx2x_msix_fp_int, 0,
 				 bp->dev->name, &bp->fp[i]);
 		if (rc) {
-			BNX2X_ERR("request fp #%d irq failed  rc %d\n",
-				  i + offset, rc);
+			BNX2X_ERR("request fp #%d irq failed  rc -%d\n",
+				  i + offset, -rc);
 			bnx2x_free_msix_irqs(bp);
 			return -EBUSY;
 		}
@@ -6000,11 +6058,49 @@ static int bnx2x_req_irq(struct bnx2x *bp)
 	return rc;
 }
 
+static void bnx2x_napi_enable(struct bnx2x *bp)
+{
+	int i;
+
+	for_each_queue(bp, i)
+		napi_enable(&bnx2x_fp(bp, i, napi));
+}
+
+static void bnx2x_napi_disable(struct bnx2x *bp)
+{
+	int i;
+
+	for_each_queue(bp, i)
+		napi_disable(&bnx2x_fp(bp, i, napi));
+}
+
+static void bnx2x_netif_start(struct bnx2x *bp)
+{
+	if (atomic_dec_and_test(&bp->intr_sem)) {
+		if (netif_running(bp->dev)) {
+			if (bp->state == BNX2X_STATE_OPEN)
+				netif_wake_queue(bp->dev);
+			bnx2x_napi_enable(bp);
+			bnx2x_int_enable(bp);
+		}
+	}
+}
+
+static void bnx2x_netif_stop(struct bnx2x *bp)
+{
+	bnx2x_int_disable_sync(bp);
+	if (netif_running(bp->dev)) {
+		bnx2x_napi_disable(bp);
+		netif_tx_disable(bp->dev);
+		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
+	}
+}
+
 /*
  * Init service functions
  */
 
-static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
+static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set)
 {
 	struct mac_configuration_cmd *config = bnx2x_sp(bp, mac_config);
 	int port = BP_PORT(bp);
@@ -6026,11 +6122,15 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
 	config->config_table[0].cam_entry.lsb_mac_addr =
 					swab16(*(u16 *)&bp->dev->dev_addr[4]);
 	config->config_table[0].cam_entry.flags = cpu_to_le16(port);
-	config->config_table[0].target_table_entry.flags = 0;
+	if (set)
+		config->config_table[0].target_table_entry.flags = 0;
+	else
+		CAM_INVALIDATE(config->config_table[0]);
 	config->config_table[0].target_table_entry.client_id = 0;
 	config->config_table[0].target_table_entry.vlan_id = 0;
 
-	DP(NETIF_MSG_IFUP, "setting MAC (%04x:%04x:%04x)\n",
+	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)\n",
+	   (set ? "setting" : "clearing"),
 	   config->config_table[0].cam_entry.msb_mac_addr,
 	   config->config_table[0].cam_entry.middle_mac_addr,
 	   config->config_table[0].cam_entry.lsb_mac_addr);
@@ -6040,8 +6140,11 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
 	config->config_table[1].cam_entry.middle_mac_addr = 0xffff;
 	config->config_table[1].cam_entry.lsb_mac_addr = 0xffff;
 	config->config_table[1].cam_entry.flags = cpu_to_le16(port);
-	config->config_table[1].target_table_entry.flags =
+	if (set)
+		config->config_table[1].target_table_entry.flags =
 				TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
+	else
+		CAM_INVALIDATE(config->config_table[1]);
 	config->config_table[1].target_table_entry.client_id = 0;
 	config->config_table[1].target_table_entry.vlan_id = 0;
 
@@ -6050,12 +6153,12 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
 		      U64_LO(bnx2x_sp_mapping(bp, mac_config)), 0);
 }
 
-static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp)
+static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp, int set)
 {
 	struct mac_configuration_cmd_e1h *config =
 		(struct mac_configuration_cmd_e1h *)bnx2x_sp(bp, mac_config);
 
-	if (bp->state != BNX2X_STATE_OPEN) {
+	if (set && (bp->state != BNX2X_STATE_OPEN)) {
 		DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state);
 		return;
 	}
@@ -6079,9 +6182,14 @@ static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp)
 	config->config_table[0].client_id = BP_L_ID(bp);
 	config->config_table[0].vlan_id = 0;
 	config->config_table[0].e1hov_id = cpu_to_le16(bp->e1hov);
-	config->config_table[0].flags = BP_PORT(bp);
+	if (set)
+		config->config_table[0].flags = BP_PORT(bp);
+	else
+		config->config_table[0].flags =
+				MAC_CONFIGURATION_ENTRY_E1H_ACTION_TYPE;
 
-	DP(NETIF_MSG_IFUP, "setting MAC (%04x:%04x:%04x)  E1HOV %d  CLID %d\n",
+	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)  E1HOV %d  CLID %d\n",
+	   (set ? "setting" : "clearing"),
 	   config->config_table[0].msb_mac_addr,
 	   config->config_table[0].middle_mac_addr,
 	   config->config_table[0].lsb_mac_addr, bp->e1hov, BP_L_ID(bp));
@@ -6106,13 +6214,13 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
 			bnx2x_rx_int(bp->fp, 10);
 			/* if index is different from 0
 			 * the reply for some commands will
-			 * be on the none default queue
+			 * be on the non default queue
 			 */
 			if (idx)
 				bnx2x_rx_int(&bp->fp[idx], 10);
 		}
-		mb(); /* state is changed by bnx2x_sp_event() */
 
+		mb(); /* state is changed by bnx2x_sp_event() */
 		if (*state_p == state)
 			return 0;
 
@@ -6167,7 +6275,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
 	u32 load_code;
 	int i, rc;
-
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
 		return -EPERM;
@@ -6183,22 +6290,24 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	if (!BP_NOMCP(bp)) {
 		load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
 		if (!load_code) {
-			BNX2X_ERR("MCP response failure, unloading\n");
+			BNX2X_ERR("MCP response failure, aborting\n");
 			return -EBUSY;
 		}
 		if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
 			return -EBUSY; /* other port in diagnostic mode */
 
 	} else {
+		int port = BP_PORT(bp);
+
 		DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		load_count[0]++;
-		load_count[1 + BP_PORT(bp)]++;
+		load_count[1 + port]++;
 		DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		if (load_count[0] == 1)
 			load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
-		else if (load_count[1 + BP_PORT(bp)] == 1)
+		else if (load_count[1 + port] == 1)
 			load_code = FW_MSG_CODE_DRV_LOAD_PORT;
 		else
 			load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
@@ -6247,9 +6356,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		bnx2x_fp(bp, i, disable_tpa) =
 					((bp->flags & TPA_ENABLE_FLAG) == 0);
 
-	/* Disable interrupt handling until HW is initialized */
-	atomic_set(&bp->intr_sem, 1);
-
 	if (bp->flags & USING_MSIX_FLAG) {
 		rc = bnx2x_req_msix_irqs(bp);
 		if (rc) {
@@ -6273,22 +6379,19 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	rc = bnx2x_init_hw(bp, load_code);
 	if (rc) {
 		BNX2X_ERR("HW init failed, aborting\n");
-		goto load_error;
+		goto load_int_disable;
 	}
 
-	/* Enable interrupt handling */
-	atomic_set(&bp->intr_sem, 0);
-
 	/* Setup NIC internals and enable interrupts */
-	bnx2x_nic_init(bp);
+	bnx2x_nic_init(bp, load_code);
 
 	/* Send LOAD_DONE command to MCP */
 	if (!BP_NOMCP(bp)) {
 		load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
 		if (!load_code) {
-			BNX2X_ERR("MCP response failure, unloading\n");
+			BNX2X_ERR("MCP response failure, aborting\n");
 			rc = -EBUSY;
-			goto load_int_disable;
+			goto load_rings_free;
 		}
 	}
 
@@ -6298,15 +6401,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
 	/* Enable Rx interrupt handling before sending the ramrod
 	   as it's completed on Rx FP queue */
-	for_each_queue(bp, i)
-		napi_enable(&bnx2x_fp(bp, i, napi));
+	bnx2x_napi_enable(bp);
+
+	/* Enable interrupt handling */
+	atomic_set(&bp->intr_sem, 0);
 
 	rc = bnx2x_setup_leading(bp);
 	if (rc) {
-#ifdef BNX2X_STOP_ON_ERROR
-		bp->panic = 1;
-#endif
-		goto load_stop_netif;
+		BNX2X_ERR("Setup leading failed!\n");
+		goto load_netif_stop;
 	}
 
 	if (CHIP_IS_E1H(bp))
@@ -6319,13 +6422,13 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		for_each_nondefault_queue(bp, i) {
 			rc = bnx2x_setup_multi(bp, i);
 			if (rc)
-				goto load_stop_netif;
+				goto load_netif_stop;
 		}
 
 	if (CHIP_IS_E1(bp))
-		bnx2x_set_mac_addr_e1(bp);
+		bnx2x_set_mac_addr_e1(bp, 1);
 	else
-		bnx2x_set_mac_addr_e1h(bp);
+		bnx2x_set_mac_addr_e1h(bp, 1);
 
 	if (bp->port.pmf)
 		bnx2x_initial_phy_init(bp);
@@ -6339,7 +6442,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		break;
 
 	case LOAD_OPEN:
-		/* IRQ is only requested from bnx2x_open */
 		netif_start_queue(bp->dev);
 		bnx2x_set_rx_mode(bp->dev);
 		if (bp->flags & USING_MSIX_FLAG)
@@ -6365,21 +6467,17 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
 	return 0;
 
-load_stop_netif:
+load_netif_stop:
+	bnx2x_napi_disable(bp);
+load_rings_free:
+	/* Free SKBs, SGEs, TPA pool and driver internals */
+	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
-		napi_disable(&bnx2x_fp(bp, i, napi));
-
+		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 load_int_disable:
 	bnx2x_int_disable_sync(bp);
-
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
-
-	/* Free SKBs, SGEs, TPA pool and driver internals */
-	bnx2x_free_skbs(bp);
-	for_each_queue(bp, i)
-		bnx2x_free_rx_sge_range(bp, bp->fp + i,
-					RX_SGE_CNT*NUM_RX_SGE_PAGES);
 load_error:
 	bnx2x_free_mem(bp);
 
@@ -6394,7 +6492,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
 
 	/* halt the connection */
 	bp->fp[index].state = BNX2X_FP_STATE_HALTING;
-	bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, 0, 0);
+	bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, index, 0);
 
 	/* Wait for completion */
 	rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index,
@@ -6411,7 +6509,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
 	return rc;
 }
 
-static void bnx2x_stop_leading(struct bnx2x *bp)
+static int bnx2x_stop_leading(struct bnx2x *bp)
 {
 	u16 dsb_sp_prod_idx;
 	/* if the other port is handling traffic,
@@ -6429,7 +6527,7 @@ static void bnx2x_stop_leading(struct bnx2x *bp)
 	rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, 0,
 			       &(bp->fp[0].state), 1);
 	if (rc) /* timeout */
-		return;
+		return rc;
 
 	dsb_sp_prod_idx = *bp->dsb_sp_prod;
 
@@ -6441,20 +6539,24 @@ static void bnx2x_stop_leading(struct bnx2x *bp)
 	   so there is not much to do if this times out
 	 */
 	while (dsb_sp_prod_idx == *bp->dsb_sp_prod) {
-		msleep(1);
 		if (!cnt) {
 			DP(NETIF_MSG_IFDOWN, "timeout waiting for port del "
 			   "dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n",
 			   *bp->dsb_sp_prod, dsb_sp_prod_idx);
 #ifdef BNX2X_STOP_ON_ERROR
 			bnx2x_panic();
+#else
+			rc = -EBUSY;
 #endif
 			break;
 		}
 		cnt--;
+		msleep(1);
 	}
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
 	bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
+
+	return rc;
 }
 
 static void bnx2x_reset_func(struct bnx2x *bp)
@@ -6496,7 +6598,7 @@ static void bnx2x_reset_port(struct bnx2x *bp)
 	val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
 	if (val)
 		DP(NETIF_MSG_IFDOWN,
-		   "BRB1 is not empty  %d blooks are occupied\n", val);
+		   "BRB1 is not empty  %d blocks are occupied\n", val);
 
 	/* TODO: Close Doorbell port? */
 }
@@ -6536,43 +6638,35 @@ static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
 	}
 }
 
-/* msut be called with rtnl_lock */
+/* must be called with rtnl_lock */
 static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 {
+	int port = BP_PORT(bp);
 	u32 reset_code = 0;
-	int i, cnt;
+	int i, cnt, rc;
 
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
 
 	bp->rx_mode = BNX2X_RX_MODE_NONE;
 	bnx2x_set_storm_rx_mode(bp);
 
-	if (netif_running(bp->dev)) {
-		netif_tx_disable(bp->dev);
-		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
-	}
-
+	bnx2x_netif_stop(bp);
+	if (!netif_running(bp->dev))
+		bnx2x_napi_disable(bp);
 	del_timer_sync(&bp->timer);
 	SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb,
 		 (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	/* Wait until all fast path tasks complete */
+	/* Wait until tx fast path tasks complete */
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
-#ifdef BNX2X_STOP_ON_ERROR
-#ifdef __powerpc64__
-		DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n",
-#else
-		DP(NETIF_MSG_IFDOWN, "fp->tpa_queue_used = 0x%llx\n",
-#endif
-		   fp->tpa_queue_used);
-#endif
 		cnt = 1000;
 		smp_rmb();
-		while (bnx2x_has_work(fp)) {
-			msleep(1);
+		while (BNX2X_HAS_TX_WORK(fp)) {
+
+			bnx2x_tx_int(fp, 1000);
 			if (!cnt) {
 				BNX2X_ERR("timeout waiting for queue[%d]\n",
 					  i);
@@ -6584,40 +6678,68 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 #endif
 			}
 			cnt--;
+			msleep(1);
 			smp_rmb();
 		}
 	}
-
-	/* Wait until all slow path tasks complete */
-	cnt = 1000;
-	while ((bp->spq_left != MAX_SPQ_PENDING) && cnt--)
-		msleep(1);
-
-	for_each_queue(bp, i)
-		napi_disable(&bnx2x_fp(bp, i, napi));
-	/* Disable interrupts after Tx and Rx are disabled on stack level */
-	bnx2x_int_disable_sync(bp);
+	/* Give HW time to discard old tx messages */
+	msleep(1);
 
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
 
-	if (bp->flags & NO_WOL_FLAG)
+	if (CHIP_IS_E1(bp)) {
+		struct mac_configuration_cmd *config =
+						bnx2x_sp(bp, mcast_config);
+
+		bnx2x_set_mac_addr_e1(bp, 0);
+
+		for (i = 0; i < config->hdr.length_6b; i++)
+			CAM_INVALIDATE(config->config_table[i]);
+
+		config->hdr.length_6b = i;
+		if (CHIP_REV_IS_SLOW(bp))
+			config->hdr.offset = BNX2X_MAX_EMUL_MULTI*(1 + port);
+		else
+			config->hdr.offset = BNX2X_MAX_MULTICAST*(1 + port);
+		config->hdr.client_id = BP_CL_ID(bp);
+		config->hdr.reserved1 = 0;
+
+		bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
+			      U64_HI(bnx2x_sp_mapping(bp, mcast_config)),
+			      U64_LO(bnx2x_sp_mapping(bp, mcast_config)), 0);
+
+	} else { /* E1H */
+		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
+
+		bnx2x_set_mac_addr_e1h(bp, 0);
+
+		for (i = 0; i < MC_HASH_SIZE; i++)
+			REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
+	}
+
+	if (unload_mode == UNLOAD_NORMAL)
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+	else if (bp->flags & NO_WOL_FLAG) {
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
+		if (CHIP_IS_E1H(bp))
+			REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
 
-	else if (bp->wol) {
-		u32 emac_base = BP_PORT(bp) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+	} else if (bp->wol) {
+		u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 		u8 *mac_addr = bp->dev->dev_addr;
 		u32 val;
-
 		/* The mac address is written to entries 1-4 to
 		   preserve entry 0 which is used by the PMF */
+		u8 entry = (BP_E1HVN(bp) + 1)*8;
+
 		val = (mac_addr[0] << 8) | mac_addr[1];
-		EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + (BP_E1HVN(bp) + 1)*8, val);
+		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
 
 		val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
 		      (mac_addr[4] << 8) | mac_addr[5];
-		EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + (BP_E1HVN(bp) + 1)*8 + 4,
-			val);
+		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
 
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
 
@@ -6630,23 +6752,14 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 		if (bnx2x_stop_multi(bp, i))
 			goto unload_error;
 
-	if (CHIP_IS_E1H(bp))
-		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + BP_PORT(bp)*8, 0);
-
-	bnx2x_stop_leading(bp);
-#ifdef BNX2X_STOP_ON_ERROR
-	/* If ramrod completion timed out - break here! */
-	if (bp->panic) {
+	rc = bnx2x_stop_leading(bp);
+	if (rc) {
 		BNX2X_ERR("Stop leading failed!\n");
+#ifdef BNX2X_STOP_ON_ERROR
 		return -EBUSY;
-	}
+#else
+		goto unload_error;
 #endif
-
-	if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) ||
-	    (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) {
-		DP(NETIF_MSG_IFDOWN, "failed to close leading properly!  "
-		   "state 0x%x  fp[0].state 0x%x\n",
-		   bp->state, bp->fp[0].state);
 	}
 
 unload_error:
@@ -6656,12 +6769,12 @@ unload_error:
 		DP(NETIF_MSG_IFDOWN, "NO MCP load counts      %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		load_count[0]--;
-		load_count[1 + BP_PORT(bp)]--;
+		load_count[1 + port]--;
 		DP(NETIF_MSG_IFDOWN, "NO MCP new load counts  %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		if (load_count[0] == 0)
 			reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
-		else if (load_count[1 + BP_PORT(bp)] == 0)
+		else if (load_count[1 + port] == 0)
 			reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT;
 		else
 			reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
@@ -6681,8 +6794,7 @@ unload_error:
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
-		bnx2x_free_rx_sge_range(bp, bp->fp + i,
-					RX_SGE_CNT*NUM_RX_SGE_PAGES);
+		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 	bnx2x_free_mem(bp);
 
 	bp->state = BNX2X_STATE_CLOSED;
@@ -6733,49 +6845,88 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 		/* Check if it is the UNDI driver
 		 * UNDI driver initializes CID offset for normal bell to 0x7
 		 */
+		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 		val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
+		if (val == 0x7)
+			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
+		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
 		if (val == 0x7) {
 			u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
-			/* save our func and fw_seq */
+			/* save our func */
 			int func = BP_FUNC(bp);
-			u16 fw_seq = bp->fw_seq;
+			u32 swap_en;
+			u32 swap_val;
 
 			BNX2X_DEV_INFO("UNDI is active! reset device\n");
 
 			/* try unload UNDI on port 0 */
 			bp->func = 0;
-			bp->fw_seq = (SHMEM_RD(bp,
-					     func_mb[bp->func].drv_mb_header) &
-				      DRV_MSG_SEQ_NUMBER_MASK);
-
+			bp->fw_seq =
+			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+				DRV_MSG_SEQ_NUMBER_MASK);
 			reset_code = bnx2x_fw_command(bp, reset_code);
-			bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
 
 			/* if UNDI is loaded on the other port */
 			if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
 
+				/* send "DONE" for previous unload */
+				bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+
+				/* unload UNDI on port 1 */
 				bp->func = 1;
-				bp->fw_seq = (SHMEM_RD(bp,
-					     func_mb[bp->func].drv_mb_header) &
-					      DRV_MSG_SEQ_NUMBER_MASK);
-
-				bnx2x_fw_command(bp,
-					     DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS);
-				bnx2x_fw_command(bp,
-						 DRV_MSG_CODE_UNLOAD_DONE);
-
-				/* restore our func and fw_seq */
-				bp->func = func;
-				bp->fw_seq = fw_seq;
+				bp->fw_seq =
+			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+					DRV_MSG_SEQ_NUMBER_MASK);
+				reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+				bnx2x_fw_command(bp, reset_code);
 			}
 
+			REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 :
+				    HC_REG_CONFIG_0), 0x1000);
+
+			/* close input traffic and wait for it */
+			/* Do not rcv packets to BRB */
+			REG_WR(bp,
+			      (BP_PORT(bp) ? NIG_REG_LLH1_BRB1_DRV_MASK :
+					     NIG_REG_LLH0_BRB1_DRV_MASK), 0x0);
+			/* Do not direct rcv packets that are not for MCP to
+			 * the BRB */
+			REG_WR(bp,
+			       (BP_PORT(bp) ? NIG_REG_LLH1_BRB1_NOT_MCP :
+					      NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
+			/* clear AEU */
+			REG_WR(bp,
+			     (BP_PORT(bp) ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+					    MISC_REG_AEU_MASK_ATTN_FUNC_0), 0);
+			msleep(10);
+
+			/* save NIG port swap info */
+			swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
+			swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
 			/* reset device */
 			REG_WR(bp,
 			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
-			       0xd3ffff7f);
+			       0xd3ffffff);
 			REG_WR(bp,
 			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
 			       0x1403);
+			/* take the NIG out of reset and restore swap values */
+			REG_WR(bp,
+			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+			       MISC_REGISTERS_RESET_REG_1_RST_NIG);
+			REG_WR(bp, NIG_REG_PORT_SWAP, swap_val);
+			REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en);
+
+			/* send unload done to the MCP */
+			bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+
+			/* restore our func and fw_seq */
+			bp->func = func;
+			bp->fw_seq =
+			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+				DRV_MSG_SEQ_NUMBER_MASK);
 		}
 	}
 }
@@ -6783,6 +6934,7 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 {
 	u32 val, val2, val3, val4, id;
+	u16 pmc;
 
 	/* Get the chip revision id and number. */
 	/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
@@ -6840,8 +6992,16 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 		BNX2X_ERR("This driver needs bc_ver %X but found %X,"
 			  " please upgrade BC\n", BNX2X_BC_VER, val);
 	}
-	BNX2X_DEV_INFO("%sWoL Capable\n",
-		       (bp->flags & NO_WOL_FLAG)? "Not " : "");
+
+	if (BP_E1HVN(bp) == 0) {
+		pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
+		bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
+	} else {
+		/* no WOL capability for E1HVN != 0 */
+		bp->flags |= NO_WOL_FLAG;
+	}
+	BNX2X_DEV_INFO("%sWoL capable\n",
+		       (bp->flags & NO_WOL_FLAG) ? "Not " : "");
 
 	val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
 	val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]);
@@ -7202,7 +7362,7 @@ static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
 	bp->link_params.req_flow_ctrl = (bp->port.link_config &
 					 PORT_FEATURE_FLOW_CONTROL_MASK);
 	if ((bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
-	    (!bp->port.supported & SUPPORTED_Autoneg))
+	    !(bp->port.supported & SUPPORTED_Autoneg))
 		bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
 
 	BNX2X_DEV_INFO("req_line_speed %d  req_duplex %d  req_flow_ctrl 0x%x"
@@ -7274,9 +7434,8 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 		bp->mf_config =
 			SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
 
-		val =
-		   (SHMEM_RD(bp, mf_cfg.func_mf_config[func].e1hov_tag) &
-		    FUNC_MF_CFG_E1HOV_TAG_MASK);
+		val = (SHMEM_RD(bp, mf_cfg.func_mf_config[func].e1hov_tag) &
+		       FUNC_MF_CFG_E1HOV_TAG_MASK);
 		if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
 
 			bp->e1hov = val;
@@ -7324,7 +7483,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 
 	if (BP_NOMCP(bp)) {
 		/* only supposed to happen on emulation/FPGA */
-		BNX2X_ERR("warning rendom MAC workaround active\n");
+		BNX2X_ERR("warning random MAC workaround active\n");
 		random_ether_addr(bp->dev->dev_addr);
 		memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
 	}
@@ -7337,8 +7496,8 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	int func = BP_FUNC(bp);
 	int rc;
 
-	if (nomcp)
-		bp->flags |= NO_MCP_FLAG;
+	/* Disable interrupt handling until HW is initialized */
+	atomic_set(&bp->intr_sem, 1);
 
 	mutex_init(&bp->port.phy_mutex);
 
@@ -7377,8 +7536,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	bp->tx_ticks = 50;
 	bp->rx_ticks = 25;
 
-	bp->stats_ticks = 1000000 & 0xffff00;
-
 	bp->timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
 	bp->current_interval = (poll ? poll : bp->timer_interval);
 
@@ -7628,25 +7785,25 @@ static void bnx2x_get_drvinfo(struct net_device *dev,
 			      struct ethtool_drvinfo *info)
 {
 	struct bnx2x *bp = netdev_priv(dev);
-	char phy_fw_ver[PHY_FW_VER_LEN];
+	u8 phy_fw_ver[PHY_FW_VER_LEN];
 
 	strcpy(info->driver, DRV_MODULE_NAME);
 	strcpy(info->version, DRV_MODULE_VERSION);
 
 	phy_fw_ver[0] = '\0';
 	if (bp->port.pmf) {
-		bnx2x_phy_hw_lock(bp);
+		bnx2x_acquire_phy_lock(bp);
 		bnx2x_get_ext_phy_fw_version(&bp->link_params,
 					     (bp->state != BNX2X_STATE_CLOSED),
 					     phy_fw_ver, PHY_FW_VER_LEN);
-		bnx2x_phy_hw_unlock(bp);
+		bnx2x_release_phy_lock(bp);
 	}
 
-	snprintf(info->fw_version, 32, "%d.%d.%d:%d BC:%x%s%s",
-		 BCM_5710_FW_MAJOR_VERSION, BCM_5710_FW_MINOR_VERSION,
-		 BCM_5710_FW_REVISION_VERSION,
-		 BCM_5710_FW_COMPILE_FLAGS, bp->common.bc_ver,
-		 ((phy_fw_ver[0] != '\0')? " PHY:":""), phy_fw_ver);
+	snprintf(info->fw_version, 32, "BC:%d.%d.%d%s%s",
+		 (bp->common.bc_ver & 0xff0000) >> 16,
+		 (bp->common.bc_ver & 0xff00) >> 8,
+		 (bp->common.bc_ver & 0xff),
+		 ((phy_fw_ver[0] != '\0') ? " PHY:" : ""), phy_fw_ver);
 	strcpy(info->bus_info, pci_name(bp->pdev));
 	info->n_stats = BNX2X_NUM_STATS;
 	info->testinfo_len = BNX2X_NUM_TESTS;
@@ -8097,7 +8254,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
 	if (eeprom->magic == 0x00504859)
 		if (bp->port.pmf) {
 
-			bnx2x_phy_hw_lock(bp);
+			bnx2x_acquire_phy_lock(bp);
 			rc = bnx2x_flash_download(bp, BP_PORT(bp),
 					     bp->link_params.ext_phy_config,
 					     (bp->state != BNX2X_STATE_CLOSED),
@@ -8109,7 +8266,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
 				rc |= bnx2x_phy_init(&bp->link_params,
 						     &bp->link_vars);
 			}
-			bnx2x_phy_hw_unlock(bp);
+			bnx2x_release_phy_lock(bp);
 
 		} else /* Only the PMF can access the PHY */
 			return -EINVAL;
@@ -8128,7 +8285,6 @@ static int bnx2x_get_coalesce(struct net_device *dev,
 
 	coal->rx_coalesce_usecs = bp->rx_ticks;
 	coal->tx_coalesce_usecs = bp->tx_ticks;
-	coal->stats_block_coalesce_usecs = bp->stats_ticks;
 
 	return 0;
 }
@@ -8146,44 +8302,12 @@ static int bnx2x_set_coalesce(struct net_device *dev,
 	if (bp->tx_ticks > 0x3000)
 		bp->tx_ticks = 0x3000;
 
-	bp->stats_ticks = coal->stats_block_coalesce_usecs;
-	if (bp->stats_ticks > 0xffff00)
-		bp->stats_ticks = 0xffff00;
-	bp->stats_ticks &= 0xffff00;
-
 	if (netif_running(dev))
 		bnx2x_update_coalesce(bp);
 
 	return 0;
 }
 
-static int bnx2x_set_flags(struct net_device *dev, u32 data)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-	int changed = 0;
-	int rc = 0;
-
-	if (data & ETH_FLAG_LRO) {
-		if (!(dev->features & NETIF_F_LRO)) {
-			dev->features |= NETIF_F_LRO;
-			bp->flags |= TPA_ENABLE_FLAG;
-			changed = 1;
-		}
-
-	} else if (dev->features & NETIF_F_LRO) {
-		dev->features &= ~NETIF_F_LRO;
-		bp->flags &= ~TPA_ENABLE_FLAG;
-		changed = 1;
-	}
-
-	if (changed && netif_running(dev)) {
-		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
-		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
-	}
-
-	return rc;
-}
-
 static void bnx2x_get_ringparam(struct net_device *dev,
 				struct ethtool_ringparam *ering)
 {
@@ -8266,7 +8390,7 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
 
 	if (epause->autoneg) {
 		if (!(bp->port.supported & SUPPORTED_Autoneg)) {
-			DP(NETIF_MSG_LINK, "Autoneg not supported\n");
+			DP(NETIF_MSG_LINK, "autoneg not supported\n");
 			return -EINVAL;
 		}
 
@@ -8285,6 +8409,34 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
 	return 0;
 }
 
+static int bnx2x_set_flags(struct net_device *dev, u32 data)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int changed = 0;
+	int rc = 0;
+
+	/* TPA requires Rx CSUM offloading */
+	if ((data & ETH_FLAG_LRO) && bp->rx_csum) {
+		if (!(dev->features & NETIF_F_LRO)) {
+			dev->features |= NETIF_F_LRO;
+			bp->flags |= TPA_ENABLE_FLAG;
+			changed = 1;
+		}
+
+	} else if (dev->features & NETIF_F_LRO) {
+		dev->features &= ~NETIF_F_LRO;
+		bp->flags &= ~TPA_ENABLE_FLAG;
+		changed = 1;
+	}
+
+	if (changed && netif_running(dev)) {
+		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+	}
+
+	return rc;
+}
+
 static u32 bnx2x_get_rx_csum(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -8295,9 +8447,19 @@ static u32 bnx2x_get_rx_csum(struct net_device *dev)
 static int bnx2x_set_rx_csum(struct net_device *dev, u32 data)
 {
 	struct bnx2x *bp = netdev_priv(dev);
+	int rc = 0;
 
 	bp->rx_csum = data;
-	return 0;
+
+	/* Disable TPA, when Rx CSUM is disabled. Otherwise all
+	   TPA'ed packets will be discarded due to wrong TCP CSUM */
+	if (!data) {
+		u32 flags = ethtool_op_get_flags(dev);
+
+		rc = bnx2x_set_flags(dev, (flags & ~ETH_FLAG_LRO));
+	}
+
+	return rc;
 }
 
 static int bnx2x_set_tso(struct net_device *dev, u32 data)
@@ -8335,6 +8497,7 @@ static int bnx2x_test_registers(struct bnx2x *bp)
 {
 	int idx, i, rc = -ENODEV;
 	u32 wr_val = 0;
+	int port = BP_PORT(bp);
 	static const struct {
 		u32  offset0;
 		u32  offset1;
@@ -8400,7 +8563,6 @@ static int bnx2x_test_registers(struct bnx2x *bp)
 
 		for (i = 0; reg_tbl[i].offset0 != 0xffffffff; i++) {
 			u32 offset, mask, save_val, val;
-			int port = BP_PORT(bp);
 
 			offset = reg_tbl[i].offset0 + port*reg_tbl[i].offset1;
 			mask = reg_tbl[i].mask;
@@ -8446,16 +8608,17 @@ static int bnx2x_test_memory(struct bnx2x *bp)
 	static const struct {
 		char *name;
 		u32 offset;
-		u32 mask;
+		u32 e1_mask;
+		u32 e1h_mask;
 	} prty_tbl[] = {
-		{ "CCM_REG_CCM_PRTY_STS",     CCM_REG_CCM_PRTY_STS,     0 },
-		{ "CFC_REG_CFC_PRTY_STS",     CFC_REG_CFC_PRTY_STS,     0 },
-		{ "DMAE_REG_DMAE_PRTY_STS",   DMAE_REG_DMAE_PRTY_STS,   0 },
-		{ "TCM_REG_TCM_PRTY_STS",     TCM_REG_TCM_PRTY_STS,     0 },
-		{ "UCM_REG_UCM_PRTY_STS",     UCM_REG_UCM_PRTY_STS,     0 },
-		{ "XCM_REG_XCM_PRTY_STS",     XCM_REG_XCM_PRTY_STS,     0x1 },
-
-		{ NULL, 0xffffffff, 0 }
+		{ "CCM_PRTY_STS",  CCM_REG_CCM_PRTY_STS,   0x3ffc0, 0 },
+		{ "CFC_PRTY_STS",  CFC_REG_CFC_PRTY_STS,   0x2,     0x2 },
+		{ "DMAE_PRTY_STS", DMAE_REG_DMAE_PRTY_STS, 0,       0 },
+		{ "TCM_PRTY_STS",  TCM_REG_TCM_PRTY_STS,   0x3ffc0, 0 },
+		{ "UCM_PRTY_STS",  UCM_REG_UCM_PRTY_STS,   0x3ffc0, 0 },
+		{ "XCM_PRTY_STS",  XCM_REG_XCM_PRTY_STS,   0x3ffc1, 0 },
+
+		{ NULL, 0xffffffff, 0, 0 }
 	};
 
 	if (!netif_running(bp->dev))
@@ -8469,7 +8632,8 @@ static int bnx2x_test_memory(struct bnx2x *bp)
 	/* Check the parity status */
 	for (i = 0; prty_tbl[i].offset != 0xffffffff; i++) {
 		val = REG_RD(bp, prty_tbl[i].offset);
-		if (val & ~(prty_tbl[i].mask)) {
+		if ((CHIP_IS_E1(bp) && (val & ~(prty_tbl[i].e1_mask))) ||
+		    (CHIP_IS_E1H(bp) && (val & ~(prty_tbl[i].e1h_mask)))) {
 			DP(NETIF_MSG_HW,
 			   "%s is 0x%x\n", prty_tbl[i].name, val);
 			goto test_mem_exit;
@@ -8482,34 +8646,6 @@ test_mem_exit:
 	return rc;
 }
 
-static void bnx2x_netif_start(struct bnx2x *bp)
-{
-	int i;
-
-	if (atomic_dec_and_test(&bp->intr_sem)) {
-		if (netif_running(bp->dev)) {
-			bnx2x_int_enable(bp);
-			for_each_queue(bp, i)
-				napi_enable(&bnx2x_fp(bp, i, napi));
-			if (bp->state == BNX2X_STATE_OPEN)
-				netif_wake_queue(bp->dev);
-		}
-	}
-}
-
-static void bnx2x_netif_stop(struct bnx2x *bp)
-{
-	int i;
-
-	if (netif_running(bp->dev)) {
-		netif_tx_disable(bp->dev);
-		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
-		for_each_queue(bp, i)
-			napi_disable(&bnx2x_fp(bp, i, napi));
-	}
-	bnx2x_int_disable_sync(bp);
-}
-
 static void bnx2x_wait_for_link(struct bnx2x *bp, u8 link_up)
 {
 	int cnt = 1000;
@@ -8539,15 +8675,15 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
 
 	if (loopback_mode == BNX2X_MAC_LOOPBACK) {
 		bp->link_params.loopback_mode = LOOPBACK_BMAC;
-		bnx2x_phy_hw_lock(bp);
+		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_phy_hw_unlock(bp);
+		bnx2x_release_phy_lock(bp);
 
 	} else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
 		bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
-		bnx2x_phy_hw_lock(bp);
+		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_phy_hw_unlock(bp);
+		bnx2x_release_phy_lock(bp);
 		/* wait until link state is restored */
 		bnx2x_wait_for_link(bp, link_up);
 
@@ -8771,7 +8907,7 @@ static void bnx2x_self_test(struct net_device *dev,
 	if (!netif_running(dev))
 		return;
 
-	/* offline tests are not suppoerted in MF mode */
+	/* offline tests are not supported in MF mode */
 	if (IS_E1HMF(bp))
 		etest->flags &= ~ETH_TEST_FL_OFFLINE;
 
@@ -8827,76 +8963,99 @@ static const struct {
 	long offset;
 	int size;
 	u32 flags;
-	char string[ETH_GSTRING_LEN];
+#define STATS_FLAGS_PORT		1
+#define STATS_FLAGS_FUNC		2
+	u8 string[ETH_GSTRING_LEN];
 } bnx2x_stats_arr[BNX2X_NUM_STATS] = {
-/* 1 */	{ STATS_OFFSET32(valid_bytes_received_hi),     8, 1, "rx_bytes" },
-	{ STATS_OFFSET32(error_bytes_received_hi),     8, 1, "rx_error_bytes" },
-	{ STATS_OFFSET32(total_bytes_transmitted_hi),  8, 1, "tx_bytes" },
-	{ STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi), 8, 0, "tx_error_bytes" },
+/* 1 */	{ STATS_OFFSET32(valid_bytes_received_hi),
+				8, STATS_FLAGS_FUNC, "rx_bytes" },
+	{ STATS_OFFSET32(error_bytes_received_hi),
+				8, STATS_FLAGS_FUNC, "rx_error_bytes" },
+	{ STATS_OFFSET32(total_bytes_transmitted_hi),
+				8, STATS_FLAGS_FUNC, "tx_bytes" },
+	{ STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi),
+				8, STATS_FLAGS_PORT, "tx_error_bytes" },
 	{ STATS_OFFSET32(total_unicast_packets_received_hi),
-						8, 1, "rx_ucast_packets" },
+				8, STATS_FLAGS_FUNC, "rx_ucast_packets" },
 	{ STATS_OFFSET32(total_multicast_packets_received_hi),
-						8, 1, "rx_mcast_packets" },
+				8, STATS_FLAGS_FUNC, "rx_mcast_packets" },
 	{ STATS_OFFSET32(total_broadcast_packets_received_hi),
-						8, 1, "rx_bcast_packets" },
+				8, STATS_FLAGS_FUNC, "rx_bcast_packets" },
 	{ STATS_OFFSET32(total_unicast_packets_transmitted_hi),
-						8, 1, "tx_packets" },
+				8, STATS_FLAGS_FUNC, "tx_packets" },
 	{ STATS_OFFSET32(tx_stat_dot3statsinternalmactransmiterrors_hi),
-						8, 0, "tx_mac_errors" },
+				8, STATS_FLAGS_PORT, "tx_mac_errors" },
 /* 10 */{ STATS_OFFSET32(rx_stat_dot3statscarriersenseerrors_hi),
-						8, 0, "tx_carrier_errors" },
+				8, STATS_FLAGS_PORT, "tx_carrier_errors" },
 	{ STATS_OFFSET32(rx_stat_dot3statsfcserrors_hi),
-						8, 0, "rx_crc_errors" },
+				8, STATS_FLAGS_PORT, "rx_crc_errors" },
 	{ STATS_OFFSET32(rx_stat_dot3statsalignmenterrors_hi),
-						8, 0, "rx_align_errors" },
+				8, STATS_FLAGS_PORT, "rx_align_errors" },
 	{ STATS_OFFSET32(tx_stat_dot3statssinglecollisionframes_hi),
-						8, 0, "tx_single_collisions" },
+				8, STATS_FLAGS_PORT, "tx_single_collisions" },
 	{ STATS_OFFSET32(tx_stat_dot3statsmultiplecollisionframes_hi),
-						8, 0, "tx_multi_collisions" },
+				8, STATS_FLAGS_PORT, "tx_multi_collisions" },
 	{ STATS_OFFSET32(tx_stat_dot3statsdeferredtransmissions_hi),
-						8, 0, "tx_deferred" },
+				8, STATS_FLAGS_PORT, "tx_deferred" },
 	{ STATS_OFFSET32(tx_stat_dot3statsexcessivecollisions_hi),
-						8, 0, "tx_excess_collisions" },
+				8, STATS_FLAGS_PORT, "tx_excess_collisions" },
 	{ STATS_OFFSET32(tx_stat_dot3statslatecollisions_hi),
-						8, 0, "tx_late_collisions" },
+				8, STATS_FLAGS_PORT, "tx_late_collisions" },
 	{ STATS_OFFSET32(tx_stat_etherstatscollisions_hi),
-						8, 0, "tx_total_collisions" },
+				8, STATS_FLAGS_PORT, "tx_total_collisions" },
 	{ STATS_OFFSET32(rx_stat_etherstatsfragments_hi),
-						8, 0, "rx_fragments" },
-/* 20 */{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi), 8, 0, "rx_jabbers" },
+				8, STATS_FLAGS_PORT, "rx_fragments" },
+/* 20 */{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi),
+				8, STATS_FLAGS_PORT, "rx_jabbers" },
 	{ STATS_OFFSET32(rx_stat_etherstatsundersizepkts_hi),
-						8, 0, "rx_undersize_packets" },
+				8, STATS_FLAGS_PORT, "rx_undersize_packets" },
 	{ STATS_OFFSET32(jabber_packets_received),
-						4, 1, "rx_oversize_packets" },
+				4, STATS_FLAGS_FUNC, "rx_oversize_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts64octets_hi),
-						8, 0, "tx_64_byte_packets" },
+				8, STATS_FLAGS_PORT, "tx_64_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts65octetsto127octets_hi),
-					8, 0, "tx_65_to_127_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_65_to_127_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts128octetsto255octets_hi),
-					8, 0, "tx_128_to_255_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_128_to_255_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts256octetsto511octets_hi),
-					8, 0, "tx_256_to_511_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_256_to_511_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts512octetsto1023octets_hi),
-					8, 0, "tx_512_to_1023_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_512_to_1023_byte_packets" },
 	{ STATS_OFFSET32(etherstatspkts1024octetsto1522octets_hi),
-					8, 0, "tx_1024_to_1522_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_1024_to_1522_byte_packets" },
 	{ STATS_OFFSET32(etherstatspktsover1522octets_hi),
-					8, 0, "tx_1523_to_9022_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_1523_to_9022_byte_packets" },
 /* 30 */{ STATS_OFFSET32(rx_stat_xonpauseframesreceived_hi),
-						8, 0, "rx_xon_frames" },
+				8, STATS_FLAGS_PORT, "rx_xon_frames" },
 	{ STATS_OFFSET32(rx_stat_xoffpauseframesreceived_hi),
-						8, 0, "rx_xoff_frames" },
-	{ STATS_OFFSET32(tx_stat_outxonsent_hi),  8, 0, "tx_xon_frames" },
-	{ STATS_OFFSET32(tx_stat_outxoffsent_hi), 8, 0, "tx_xoff_frames" },
+				8, STATS_FLAGS_PORT, "rx_xoff_frames" },
+	{ STATS_OFFSET32(tx_stat_outxonsent_hi),
+				8, STATS_FLAGS_PORT, "tx_xon_frames" },
+	{ STATS_OFFSET32(tx_stat_outxoffsent_hi),
+				8, STATS_FLAGS_PORT, "tx_xoff_frames" },
 	{ STATS_OFFSET32(rx_stat_maccontrolframesreceived_hi),
-						8, 0, "rx_mac_ctrl_frames" },
-	{ STATS_OFFSET32(mac_filter_discard),   4, 1, "rx_filtered_packets" },
-	{ STATS_OFFSET32(no_buff_discard),      4, 1, "rx_discards" },
-	{ STATS_OFFSET32(xxoverflow_discard),   4, 1, "rx_fw_discards" },
-	{ STATS_OFFSET32(brb_drop_hi),          8, 1, "brb_discard" },
-/* 39 */{ STATS_OFFSET32(brb_truncate_discard), 8, 1, "brb_truncate" }
+				8, STATS_FLAGS_PORT, "rx_mac_ctrl_frames" },
+	{ STATS_OFFSET32(mac_filter_discard),
+				4, STATS_FLAGS_PORT, "rx_filtered_packets" },
+	{ STATS_OFFSET32(no_buff_discard),
+				4, STATS_FLAGS_FUNC, "rx_discards" },
+	{ STATS_OFFSET32(xxoverflow_discard),
+				4, STATS_FLAGS_PORT, "rx_fw_discards" },
+	{ STATS_OFFSET32(brb_drop_hi),
+				8, STATS_FLAGS_PORT, "brb_discard" },
+	{ STATS_OFFSET32(brb_truncate_hi),
+				8, STATS_FLAGS_PORT, "brb_truncate" },
+/* 40 */{ STATS_OFFSET32(rx_err_discard_pkt),
+				4, STATS_FLAGS_FUNC, "rx_phy_ip_err_discards"},
+	{ STATS_OFFSET32(rx_skb_alloc_failed),
+				4, STATS_FLAGS_FUNC, "rx_skb_alloc_discard" },
+/* 42 */{ STATS_OFFSET32(hw_csum_err),
+				4, STATS_FLAGS_FUNC, "rx_csum_offload_errors" }
 };
 
+#define IS_NOT_E1HMF_STAT(bp, i) \
+		(IS_E1HMF(bp) && (bnx2x_stats_arr[i].flags & STATS_FLAGS_PORT))
+
 static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -8905,7 +9064,7 @@ static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 	switch (stringset) {
 	case ETH_SS_STATS:
 		for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
-			if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+			if (IS_NOT_E1HMF_STAT(bp, i))
 				continue;
 			strcpy(buf + j*ETH_GSTRING_LEN,
 			       bnx2x_stats_arr[i].string);
@@ -8925,7 +9084,7 @@ static int bnx2x_get_stats_count(struct net_device *dev)
 	int i, num_stats = 0;
 
 	for (i = 0; i < BNX2X_NUM_STATS; i++) {
-		if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+		if (IS_NOT_E1HMF_STAT(bp, i))
 			continue;
 		num_stats++;
 	}
@@ -8940,7 +9099,7 @@ static void bnx2x_get_ethtool_stats(struct net_device *dev,
 	int i, j;
 
 	for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
-		if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+		if (IS_NOT_E1HMF_STAT(bp, i))
 			continue;
 
 		if (bnx2x_stats_arr[i].size == 0) {
@@ -9057,7 +9216,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
 				       PCI_PM_CTRL_PME_STATUS));
 
 		if (pmcsr & PCI_PM_CTRL_STATE_MASK)
-		/* delay required during transition out of D3hot */
+			/* delay required during transition out of D3hot */
 			msleep(20);
 		break;
 
@@ -9092,6 +9251,7 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
 						 napi);
 	struct bnx2x *bp = fp->bp;
 	int work_done = 0;
+	u16 rx_cons_sb;
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
@@ -9104,17 +9264,22 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
 
 	bnx2x_update_fpsb_idx(fp);
 
-	if ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) ||
-	    (fp->tx_pkt_prod != fp->tx_pkt_cons))
+	if (BNX2X_HAS_TX_WORK(fp))
 		bnx2x_tx_int(fp, budget);
 
-	if (le16_to_cpu(*fp->rx_cons_sb) != fp->rx_comp_cons)
+	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
+	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+		rx_cons_sb++;
+	if (BNX2X_HAS_RX_WORK(fp))
 		work_done = bnx2x_rx_int(fp, budget);
 
-	rmb(); /* bnx2x_has_work() reads the status block */
+	rmb(); /* BNX2X_HAS_WORK() reads the status block */
+	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
+	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+		rx_cons_sb++;
 
 	/* must not complete if we consumed full budget */
-	if ((work_done < budget) && !bnx2x_has_work(fp)) {
+	if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
 
 #ifdef BNX2X_STOP_ON_ERROR
 poll_panic:
@@ -9131,7 +9296,7 @@ poll_panic:
 
 
 /* we split the first BD into headers and data BDs
- * to ease the pain of our fellow micocode engineers
+ * to ease the pain of our fellow microcode engineers
  * we use one mapping for both BDs
  * So far this has only been observed to happen
  * in Other Operating Systems(TM)
@@ -9238,7 +9403,7 @@ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
 			/* Check if LSO packet needs to be copied:
 			   3 = 1 (for headers BD) + 2 (for PBD and last BD) */
 			int wnd_size = MAX_FETCH_BD - 3;
-			/* Number of widnows to check */
+			/* Number of windows to check */
 			int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size;
 			int wnd_idx = 0;
 			int frag_idx = 0;
@@ -9327,8 +9492,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	fp_index = (smp_processor_id() % bp->num_queues);
 	fp = &bp->fp[fp_index];
 
-	if (unlikely(bnx2x_tx_avail(bp->fp) <
-					(skb_shinfo(skb)->nr_frags + 3))) {
+	if (unlikely(bnx2x_tx_avail(fp) < (skb_shinfo(skb)->nr_frags + 3))) {
 		bp->eth_stats.driver_xoff++,
 		netif_stop_queue(dev);
 		BNX2X_ERR("BUG! Tx ring full when queue awake!\n");
@@ -9340,7 +9504,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	   skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
 	   ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
 
-	/* First, check if we need to linearaize the skb
+	/* First, check if we need to linearize the skb
 	   (due to FW restrictions) */
 	if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
 		/* Statistics of linearization */
@@ -9349,7 +9513,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			DP(NETIF_MSG_TX_QUEUED, "SKB linearization failed - "
 			   "silently dropping this SKB\n");
 			dev_kfree_skb_any(skb);
-			return 0;
+			return NETDEV_TX_OK;
 		}
 	}
 
@@ -9372,7 +9536,8 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
 	tx_bd->general_data = (UNICAST_ADDRESS <<
 			       ETH_TX_BD_ETH_ADDR_TYPE_SHIFT);
-	tx_bd->general_data |= 1; /* header nbd */
+	/* header nbd */
+	tx_bd->general_data |= (1 << ETH_TX_BD_HDR_NBDS_SHIFT);
 
 	/* remember the first BD of the packet */
 	tx_buf->first_bd = fp->tx_bd_prod;
@@ -9390,7 +9555,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		tx_bd->vlan = cpu_to_le16(pkt_prod);
 
 	if (xmit_type) {
-
 		/* turn on parsing and get a BD */
 		bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
 		pbd = (void *)&fp->tx_desc_ring[bd_prod];
@@ -9451,7 +9615,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
 	tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
-	nbd = skb_shinfo(skb)->nr_frags + ((pbd == NULL)? 1 : 2);
+	nbd = skb_shinfo(skb)->nr_frags + ((pbd == NULL) ? 1 : 2);
 	tx_bd->nbd = cpu_to_le16(nbd);
 	tx_bd->nbytes = cpu_to_le16(skb_headlen(skb));
 
@@ -9721,9 +9885,9 @@ static int bnx2x_change_mac_addr(struct net_device *dev, void *p)
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 	if (netif_running(dev)) {
 		if (CHIP_IS_E1(bp))
-			bnx2x_set_mac_addr_e1(bp);
+			bnx2x_set_mac_addr_e1(bp, 1);
 		else
-			bnx2x_set_mac_addr_e1h(bp);
+			bnx2x_set_mac_addr_e1h(bp, 1);
 	}
 
 	return 0;
@@ -9734,6 +9898,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct mii_ioctl_data *data = if_mii(ifr);
 	struct bnx2x *bp = netdev_priv(dev);
+	int port = BP_PORT(bp);
 	int err;
 
 	switch (cmd) {
@@ -9749,7 +9914,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 			return -EAGAIN;
 
 		mutex_lock(&bp->port.phy_mutex);
-		err = bnx2x_cl45_read(bp, BP_PORT(bp), 0, bp->port.phy_addr,
+		err = bnx2x_cl45_read(bp, port, 0, bp->port.phy_addr,
 				      DEFAULT_PHY_DEV_ADDR,
 				      (data->reg_num & 0x1f), &mii_regval);
 		data->val_out = mii_regval;
@@ -9765,7 +9930,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 			return -EAGAIN;
 
 		mutex_lock(&bp->port.phy_mutex);
-		err = bnx2x_cl45_write(bp, BP_PORT(bp), 0, bp->port.phy_addr,
+		err = bnx2x_cl45_write(bp, port, 0, bp->port.phy_addr,
 				       DEFAULT_PHY_DEV_ADDR,
 				       (data->reg_num & 0x1f), data->val_in);
 		mutex_unlock(&bp->port.phy_mutex);
@@ -10141,7 +10306,7 @@ static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	netif_device_detach(dev);
 
-	bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+	bnx2x_nic_unload(bp, UNLOAD_CLOSE);
 
 	bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
 
@@ -10174,7 +10339,7 @@ static int bnx2x_resume(struct pci_dev *pdev)
 	bnx2x_set_power_state(bp, PCI_D0);
 	netif_device_attach(dev);
 
-	rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+	rc = bnx2x_nic_load(bp, LOAD_OPEN);
 
 	rtnl_unlock();
 
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 15c9a994672..a67b0c358ae 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -6,7 +6,7 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
- * The registers description starts with the regsister Access type followed
+ * The registers description starts with the register Access type followed
  * by size in bits. For example [RW 32]. The access types are:
  * R  - Read only
  * RC - Clear on read
@@ -49,7 +49,7 @@
 /* [RW 10] Write client 0: Assert pause threshold. */
 #define BRB1_REG_PAUSE_LOW_THRESHOLD_0				 0x60068
 #define BRB1_REG_PAUSE_LOW_THRESHOLD_1				 0x6006c
-/* [R 24] The number of full blocks occpied by port. */
+/* [R 24] The number of full blocks occupied by port. */
 #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0				 0x60094
 /* [RW 1] Reset the design by software. */
 #define BRB1_REG_SOFT_RESET					 0x600dc
@@ -740,6 +740,7 @@
 #define HC_REG_ATTN_MSG1_ADDR_L 				 0x108020
 #define HC_REG_ATTN_NUM_P0					 0x108038
 #define HC_REG_ATTN_NUM_P1					 0x10803c
+#define HC_REG_COMMAND_REG					 0x108180
 #define HC_REG_CONFIG_0 					 0x108000
 #define HC_REG_CONFIG_1 					 0x108004
 #define HC_REG_FUNC_NUM_P0					 0x1080ac
@@ -1372,6 +1373,23 @@
    be asserted). */
 #define MISC_REG_DRIVER_CONTROL_16				 0xa5f0
 #define MISC_REG_DRIVER_CONTROL_16_SIZE 			 2
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+   32 clients. Each client can be controlled by one driver only. One in each
+   bit represent that this driver control the appropriate client (Ex: bit 5
+   is set means this driver control client number 5). addr1 = set; addr0 =
+   clear; read from both addresses will give the same result = status. write
+   to address 1 will set a request to control all the clients that their
+   appropriate bit (in the write command) is set. if the client is free (the
+   appropriate bit in all the other drivers is clear) one will be written to
+   that driver register; if the client isn't free the bit will remain zero.
+   if the appropriate bit is set (the driver request to gain control on a
+   client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+   interrupt will be asserted). write to address 0 will set a request to
+   free all the clients that their appropriate bit (in the write command) is
+   set. if the appropriate bit is clear (the driver request to free a client
+   it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+   be asserted). */
+#define MISC_REG_DRIVER_CONTROL_7				 0xa3c8
 /* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
    only. */
 #define MISC_REG_E1HMF_MODE					 0xa5f8
@@ -1394,13 +1412,13 @@
 #define MISC_REG_GPIO						 0xa490
 /* [R 28] this field hold the last information that caused reserved
    attention. bits [19:0] - address; [22:20] function; [23] reserved;
-   [27:24] the master thatcaused the attention - according to the following
+   [27:24] the master that caused the attention - according to the following
    encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
    dbu; 8 = dmae */
 #define MISC_REG_GRC_RSV_ATTN					 0xa3c0
 /* [R 28] this field hold the last information that caused timeout
    attention. bits [19:0] - address; [22:20] function; [23] reserved;
-   [27:24] the master thatcaused the attention - according to the following
+   [27:24] the master that caused the attention - according to the following
    encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
    dbu; 8 = dmae */
 #define MISC_REG_GRC_TIMEOUT_ATTN				 0xa3c4
@@ -1677,6 +1695,7 @@
 /* [RW 8] init credit counter for port0 in LLH */
 #define NIG_REG_LLH0_XCM_INIT_CREDIT				 0x10554
 #define NIG_REG_LLH0_XCM_MASK					 0x10130
+#define NIG_REG_LLH1_BRB1_DRV_MASK				 0x10248
 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
 #define NIG_REG_LLH1_BRB1_NOT_MCP				 0x102dc
 /* [RW 2] Determine the classification participants. 0: no classification.1:
@@ -1727,6 +1746,9 @@
 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
    for port0 */
 #define NIG_REG_STAT0_BRB_DISCARD				 0x105f0
+/* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
+   for port0 */
+#define NIG_REG_STAT0_BRB_TRUNCATE				 0x105f8
 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
    between 1024 and 1522 bytes for port0 */
 #define NIG_REG_STAT0_EGRESS_MAC_PKT0				 0x10750
@@ -2298,7 +2320,7 @@
 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
    -128k */
 #define PXP2_REG_RQ_QM_P_SIZE					 0x120050
-/* [RW 1] 1' indicates that the RBC has finished configurating the PSWRQ */
+/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
 #define PXP2_REG_RQ_RBC_DONE					 0x1201b0
 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
    001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
@@ -2406,7 +2428,7 @@
 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
    buffer reaches this number has_payload will be asserted */
 #define PXP2_REG_WR_DMAE_MPS					 0x1205ec
-/* [RW 10] if Number of entries in dmae fifo will be higer than this
+/* [RW 10] if Number of entries in dmae fifo will be higher than this
    threshold then has_payload indication will be asserted; the default value
    should be equal to &gt;  write MBS size! */
 #define PXP2_REG_WR_DMAE_TH					 0x120368
@@ -2427,7 +2449,7 @@
 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
    buffer reaches this number has_payload will be asserted */
 #define PXP2_REG_WR_TSDM_MPS					 0x1205d4
-/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
+/* [RW 10] if Number of entries in usdmdp fifo will be higher than this
    threshold then has_payload indication will be asserted; the default value
    should be equal to &gt;  write MBS size! */
 #define PXP2_REG_WR_USDMDP_TH					 0x120348
@@ -3294,12 +3316,12 @@
 #define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE		 0
 #define CFC_DEBUG1_REG_WRITE_AC 				 (0x1<<4)
 #define CFC_DEBUG1_REG_WRITE_AC_SIZE				 4
-/* [R 1] debug only: This bit indicates wheter indicates that external
+/* [R 1] debug only: This bit indicates whether indicates that external
    buffer was wrapped (oldest data was thrown); Relevant only when
    ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */
 #define DBG_REG_WRAP_ON_EXT_BUFFER				 0xc124
 #define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 			 1
-/* [R 1] debug only: This bit indicates wheter the internal buffer was
+/* [R 1] debug only: This bit indicates whether the internal buffer was
    wrapped (oldest data was thrown) Relevant only when
    ~dbg_registers_debug_target=0 (internal buffer) */
 #define DBG_REG_WRAP_ON_INT_BUFFER				 0xc128
@@ -4944,6 +4966,7 @@
 #define EMAC_RX_MODE_PROMISCUOUS				 (1L<<8)
 #define EMAC_RX_MTU_SIZE_JUMBO_ENA				 (1L<<31)
 #define EMAC_TX_MODE_EXT_PAUSE_EN				 (1L<<3)
+#define EMAC_TX_MODE_FLOW_EN					 (1L<<4)
 #define MISC_REGISTERS_GPIO_0					 0
 #define MISC_REGISTERS_GPIO_1					 1
 #define MISC_REGISTERS_GPIO_2					 2
@@ -4959,6 +4982,7 @@
 #define MISC_REGISTERS_GPIO_PORT_SHIFT				 4
 #define MISC_REGISTERS_GPIO_SET_POS				 8
 #define MISC_REGISTERS_RESET_REG_1_CLEAR			 0x588
+#define MISC_REGISTERS_RESET_REG_1_RST_NIG			 (0x1<<7)
 #define MISC_REGISTERS_RESET_REG_1_SET				 0x584
 #define MISC_REGISTERS_RESET_REG_2_CLEAR			 0x598
 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0			 (0x1<<0)
@@ -4993,7 +5017,9 @@
 #define HW_LOCK_MAX_RESOURCE_VALUE				 31
 #define HW_LOCK_RESOURCE_8072_MDIO				 0
 #define HW_LOCK_RESOURCE_GPIO					 1
+#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 			 3
 #define HW_LOCK_RESOURCE_SPIO					 2
+#define HW_LOCK_RESOURCE_UNDI					 5
 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR		      (1<<18)
 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT		      (1<<31)
 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT		      (1<<9)
@@ -5144,59 +5170,73 @@
 #define GRCBASE_MISC_AEU	GRCBASE_MISC
 
 
-/*the offset of the configuration space in the pci core register*/
+/* offset of configuration space in the pci core register */
 #define PCICFG_OFFSET					0x2000
 #define PCICFG_VENDOR_ID_OFFSET 			0x00
 #define PCICFG_DEVICE_ID_OFFSET 			0x02
 #define PCICFG_COMMAND_OFFSET				0x04
+#define PCICFG_COMMAND_IO_SPACE 		(1<<0)
+#define PCICFG_COMMAND_MEM_SPACE		(1<<1)
+#define PCICFG_COMMAND_BUS_MASTER		(1<<2)
+#define PCICFG_COMMAND_SPECIAL_CYCLES		(1<<3)
+#define PCICFG_COMMAND_MWI_CYCLES		(1<<4)
+#define PCICFG_COMMAND_VGA_SNOOP		(1<<5)
+#define PCICFG_COMMAND_PERR_ENA 		(1<<6)
+#define PCICFG_COMMAND_STEPPING 		(1<<7)
+#define PCICFG_COMMAND_SERR_ENA 		(1<<8)
+#define PCICFG_COMMAND_FAST_B2B 		(1<<9)
+#define PCICFG_COMMAND_INT_DISABLE		(1<<10)
+#define PCICFG_COMMAND_RESERVED 		(0x1f<<11)
 #define PCICFG_STATUS_OFFSET				0x06
-#define PCICFG_REVESION_ID				    0x08
+#define PCICFG_REVESION_ID				0x08
 #define PCICFG_CACHE_LINE_SIZE				0x0c
 #define PCICFG_LATENCY_TIMER				0x0d
-#define PCICFG_BAR_1_LOW				    0x10
-#define PCICFG_BAR_1_HIGH				    0x14
-#define PCICFG_BAR_2_LOW				    0x18
-#define PCICFG_BAR_2_HIGH				    0x1c
-#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET	0x2c
+#define PCICFG_BAR_1_LOW				0x10
+#define PCICFG_BAR_1_HIGH				0x14
+#define PCICFG_BAR_2_LOW				0x18
+#define PCICFG_BAR_2_HIGH				0x1c
+#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET		0x2c
 #define PCICFG_SUBSYSTEM_ID_OFFSET			0x2e
-#define PCICFG_INT_LINE 				    0x3c
-#define PCICFG_INT_PIN					    0x3d
-#define PCICFG_PM_CSR_OFFSET			0x4c
-#define PCICFG_GRC_ADDRESS				    0x78
-#define PCICFG_GRC_DATA 				    0x80
+#define PCICFG_INT_LINE 				0x3c
+#define PCICFG_INT_PIN					0x3d
+#define PCICFG_PM_CAPABILITY				0x48
+#define PCICFG_PM_CAPABILITY_VERSION		(0x3<<16)
+#define PCICFG_PM_CAPABILITY_CLOCK		(1<<19)
+#define PCICFG_PM_CAPABILITY_RESERVED		(1<<20)
+#define PCICFG_PM_CAPABILITY_DSI		(1<<21)
+#define PCICFG_PM_CAPABILITY_AUX_CURRENT	(0x7<<22)
+#define PCICFG_PM_CAPABILITY_D1_SUPPORT 	(1<<25)
+#define PCICFG_PM_CAPABILITY_D2_SUPPORT 	(1<<26)
+#define PCICFG_PM_CAPABILITY_PME_IN_D0		(1<<27)
+#define PCICFG_PM_CAPABILITY_PME_IN_D1		(1<<28)
+#define PCICFG_PM_CAPABILITY_PME_IN_D2		(1<<29)
+#define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT	(1<<30)
+#define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD	(1<<31)
+#define PCICFG_PM_CSR_OFFSET				0x4c
+#define PCICFG_PM_CSR_STATE			(0x3<<0)
+#define PCICFG_PM_CSR_PME_ENABLE		(1<<8)
+#define PCICFG_PM_CSR_PME_STATUS		(1<<15)
+#define PCICFG_GRC_ADDRESS				0x78
+#define PCICFG_GRC_DATA 				0x80
 #define PCICFG_DEVICE_CONTROL				0xb4
 #define PCICFG_LINK_CONTROL				0xbc
 
-#define PCICFG_COMMAND_IO_SPACE 		    (1<<0)
-#define PCICFG_COMMAND_MEM_SPACE		    (1<<1)
-#define PCICFG_COMMAND_BUS_MASTER		    (1<<2)
-#define PCICFG_COMMAND_SPECIAL_CYCLES		    (1<<3)
-#define PCICFG_COMMAND_MWI_CYCLES		    (1<<4)
-#define PCICFG_COMMAND_VGA_SNOOP		    (1<<5)
-#define PCICFG_COMMAND_PERR_ENA 		    (1<<6)
-#define PCICFG_COMMAND_STEPPING 		    (1<<7)
-#define PCICFG_COMMAND_SERR_ENA 		    (1<<8)
-#define PCICFG_COMMAND_FAST_B2B 		    (1<<9)
-#define PCICFG_COMMAND_INT_DISABLE		    (1<<10)
-#define PCICFG_COMMAND_RESERVED 		    (0x1f<<11)
-
-#define PCICFG_PM_CSR_STATE			    (0x3<<0)
-#define PCICFG_PM_CSR_PME_STATUS		    (1<<15)
 
 #define BAR_USTRORM_INTMEM				0x400000
 #define BAR_CSTRORM_INTMEM				0x410000
 #define BAR_XSTRORM_INTMEM				0x420000
 #define BAR_TSTRORM_INTMEM				0x430000
 
+/* for accessing the IGU in case of status block ACK */
 #define BAR_IGU_INTMEM					0x440000
 
 #define BAR_DOORBELL_OFFSET				0x800000
 
 #define BAR_ME_REGISTER 				0x450000
 
-
-#define GRC_CONFIG_2_SIZE_REG		    0x408 /* config_2 offset */
-#define PCI_CONFIG_2_BAR1_SIZE			    (0xfL<<0)
+/* config_2 offset */
+#define GRC_CONFIG_2_SIZE_REG				0x408
+#define PCI_CONFIG_2_BAR1_SIZE			(0xfL<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_DISABLED 	(0L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_64K		(1L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_128K		(2L<<0)
@@ -5213,11 +5253,11 @@
 #define PCI_CONFIG_2_BAR1_SIZE_256M		(13L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_512M		(14L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_1G		(15L<<0)
-#define PCI_CONFIG_2_BAR1_64ENA 		    (1L<<4)
-#define PCI_CONFIG_2_EXP_ROM_RETRY		    (1L<<5)
-#define PCI_CONFIG_2_CFG_CYCLE_RETRY		    (1L<<6)
-#define PCI_CONFIG_2_FIRST_CFG_DONE		    (1L<<7)
-#define PCI_CONFIG_2_EXP_ROM_SIZE		    (0xffL<<8)
+#define PCI_CONFIG_2_BAR1_64ENA 		(1L<<4)
+#define PCI_CONFIG_2_EXP_ROM_RETRY		(1L<<5)
+#define PCI_CONFIG_2_CFG_CYCLE_RETRY		(1L<<6)
+#define PCI_CONFIG_2_FIRST_CFG_DONE		(1L<<7)
+#define PCI_CONFIG_2_EXP_ROM_SIZE		(0xffL<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED	(0L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_2K		(1L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_4K		(2L<<8)
@@ -5234,46 +5274,44 @@
 #define PCI_CONFIG_2_EXP_ROM_SIZE_8M		(13L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_16M		(14L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_32M		(15L<<8)
-#define PCI_CONFIG_2_BAR_PREFETCH		    (1L<<16)
-#define PCI_CONFIG_2_RESERVED0			    (0x7fffL<<17)
+#define PCI_CONFIG_2_BAR_PREFETCH		(1L<<16)
+#define PCI_CONFIG_2_RESERVED0			(0x7fffL<<17)
 
 /* config_3 offset */
-#define GRC_CONFIG_3_SIZE_REG				(0x40c)
-#define PCI_CONFIG_3_STICKY_BYTE		    (0xffL<<0)
-#define PCI_CONFIG_3_FORCE_PME			    (1L<<24)
-#define PCI_CONFIG_3_PME_STATUS 		    (1L<<25)
-#define PCI_CONFIG_3_PME_ENABLE 		    (1L<<26)
-#define PCI_CONFIG_3_PM_STATE			    (0x3L<<27)
-#define PCI_CONFIG_3_VAUX_PRESET		    (1L<<30)
-#define PCI_CONFIG_3_PCI_POWER			    (1L<<31)
-
-/* config_2 offset */
-#define GRC_CONFIG_2_SIZE_REG		    0x408
+#define GRC_CONFIG_3_SIZE_REG				0x40c
+#define PCI_CONFIG_3_STICKY_BYTE		(0xffL<<0)
+#define PCI_CONFIG_3_FORCE_PME			(1L<<24)
+#define PCI_CONFIG_3_PME_STATUS 		(1L<<25)
+#define PCI_CONFIG_3_PME_ENABLE 		(1L<<26)
+#define PCI_CONFIG_3_PM_STATE			(0x3L<<27)
+#define PCI_CONFIG_3_VAUX_PRESET		(1L<<30)
+#define PCI_CONFIG_3_PCI_POWER			(1L<<31)
 
 #define GRC_BAR2_CONFIG 				0x4e0
-#define PCI_CONFIG_2_BAR2_SIZE			    (0xfL<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_DISABLED 	    (0L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_64K		    (1L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_128K		    (2L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_256K		    (3L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_512K		    (4L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_1M		    (5L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_2M		    (6L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_4M		    (7L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_8M		    (8L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_16M		    (9L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_32M		    (10L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_64M		    (11L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_128M		    (12L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_256M		    (13L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_512M		    (14L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_1G		    (15L<<0)
-#define PCI_CONFIG_2_BAR2_64ENA 		    (1L<<4)
+#define PCI_CONFIG_2_BAR2_SIZE			(0xfL<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_DISABLED 	(0L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_64K		(1L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_128K		(2L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_256K		(3L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_512K		(4L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_1M		(5L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_2M		(6L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_4M		(7L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_8M		(8L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_16M		(9L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_32M		(10L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_64M		(11L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_128M		(12L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_256M		(13L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_512M		(14L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_1G		(15L<<0)
+#define PCI_CONFIG_2_BAR2_64ENA 		(1L<<4)
+
+#define PCI_PM_DATA_A					0x410
+#define PCI_PM_DATA_B					0x414
+#define PCI_ID_VAL1					0x434
+#define PCI_ID_VAL2					0x438
 
-#define PCI_PM_DATA_A					(0x410)
-#define PCI_PM_DATA_B					(0x414)
-#define PCI_ID_VAL1					(0x434)
-#define PCI_ID_VAL2					(0x438)
 
 #define MDIO_REG_BANK_CL73_IEEEB0			0x0
 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL		0x0
@@ -5522,6 +5560,8 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_PMA_REG_GEN_CTRL		0xca10
 #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP	0x0188
 #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET		0x018a
+#define MDIO_PMA_REG_M8051_MSGIN_REG	0xca12
+#define MDIO_PMA_REG_M8051_MSGOUT_REG	0xca13
 #define MDIO_PMA_REG_ROM_VER1		0xca19
 #define MDIO_PMA_REG_ROM_VER2		0xca1a
 #define MDIO_PMA_REG_EDC_FFE_MAIN	0xca1b
@@ -5576,7 +5616,8 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_AN_REG_LINK_STATUS 	0x8304
 #define MDIO_AN_REG_CL37_CL73		0x8370
 #define MDIO_AN_REG_CL37_AN		0xffe0
-#define MDIO_AN_REG_CL37_FD		0xffe4
+#define MDIO_AN_REG_CL37_FC_LD		0xffe4
+#define MDIO_AN_REG_CL37_FC_LP		0xffe5
 
 
 #define IGU_FUNC_BASE			0x0400
@@ -5600,4 +5641,13 @@ Theotherbitsarereservedandshouldbezero*/
 #define IGU_INT_NOP				2
 #define IGU_INT_NOP2			3
 
+#define COMMAND_REG_INT_ACK	    0x0
+#define COMMAND_REG_PROD_UPD	    0x4
+#define COMMAND_REG_ATTN_BITS_UPD   0x8
+#define COMMAND_REG_ATTN_BITS_SET   0xc
+#define COMMAND_REG_ATTN_BITS_CLR   0x10
+#define COMMAND_REG_COALESCE_NOW    0x14
+#define COMMAND_REG_SIMD_MASK	    0x18
+#define COMMAND_REG_SIMD_NOMASK     0x1c
+
 
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index ebb539e090c..6106660a4a4 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2107,6 +2107,7 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
 			aggregator = __get_first_agg(port);
 			ad_agg_selection_logic(aggregator);
 		}
+		bond_3ad_set_carrier(bond);
 	}
 
 	// for each port run the state machines
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index a641eeaa2a2..c792138511e 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2223,272 +2223,217 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in
 
 /*-------------------------------- Monitoring -------------------------------*/
 
-/*
- * if !have_locks, return nonzero if a failover is necessary.  if
- * have_locks, do whatever failover activities are needed.
- *
- * This is to separate the inspection and failover steps for locking
- * purposes; failover requires rtnl, but acquiring it for every
- * inspection is undesirable, so a wrapper first does inspection, and
- * the acquires the necessary locks and calls again to perform
- * failover if needed.  Since all locks are dropped, a complete
- * restart is needed between calls.
- */
-static int __bond_mii_monitor(struct bonding *bond, int have_locks)
-{
-	struct slave *slave, *oldcurrent;
-	int do_failover = 0;
-	int i;
-
-	if (bond->slave_cnt == 0)
-		goto out;
 
-	/* we will try to read the link status of each of our slaves, and
-	 * set their IFF_RUNNING flag appropriately. For each slave not
-	 * supporting MII status, we won't do anything so that a user-space
-	 * program could monitor the link itself if needed.
-	 */
-
-	read_lock(&bond->curr_slave_lock);
-	oldcurrent = bond->curr_active_slave;
-	read_unlock(&bond->curr_slave_lock);
+static int bond_miimon_inspect(struct bonding *bond)
+{
+	struct slave *slave;
+	int i, link_state, commit = 0;
 
 	bond_for_each_slave(bond, slave, i) {
-		struct net_device *slave_dev = slave->dev;
-		int link_state;
-		u16 old_speed = slave->speed;
-		u8 old_duplex = slave->duplex;
+		slave->new_link = BOND_LINK_NOCHANGE;
 
-		link_state = bond_check_dev_link(bond, slave_dev, 0);
+		link_state = bond_check_dev_link(bond, slave->dev, 0);
 
 		switch (slave->link) {
-		case BOND_LINK_UP:	/* the link was up */
-			if (link_state == BMSR_LSTATUS) {
-				if (!oldcurrent) {
-					if (!have_locks)
-						return 1;
-					do_failover = 1;
-				}
-				break;
-			} else { /* link going down */
-				slave->link  = BOND_LINK_FAIL;
-				slave->delay = bond->params.downdelay;
-
-				if (slave->link_failure_count < UINT_MAX) {
-					slave->link_failure_count++;
-				}
+		case BOND_LINK_UP:
+			if (link_state)
+				continue;
 
-				if (bond->params.downdelay) {
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status down for %s "
-					       "interface %s, disabling it in "
-					       "%d ms.\n",
-					       bond->dev->name,
-					       IS_UP(slave_dev)
-					       ? ((bond->params.mode == BOND_MODE_ACTIVEBACKUP)
-						  ? ((slave == oldcurrent)
-						     ? "active " : "backup ")
-						  : "")
-					       : "idle ",
-					       slave_dev->name,
-					       bond->params.downdelay * bond->params.miimon);
-				}
+			slave->link = BOND_LINK_FAIL;
+			slave->delay = bond->params.downdelay;
+			if (slave->delay) {
+				printk(KERN_INFO DRV_NAME
+				       ": %s: link status down for %s"
+				       "interface %s, disabling it in %d ms.\n",
+				       bond->dev->name,
+				       (bond->params.mode ==
+					BOND_MODE_ACTIVEBACKUP) ?
+				       ((slave->state == BOND_STATE_ACTIVE) ?
+					"active " : "backup ") : "",
+				       slave->dev->name,
+				       bond->params.downdelay * bond->params.miimon);
 			}
-			/* no break ! fall through the BOND_LINK_FAIL test to
-			   ensure proper action to be taken
-			*/
-		case BOND_LINK_FAIL:	/* the link has just gone down */
-			if (link_state != BMSR_LSTATUS) {
-				/* link stays down */
-				if (slave->delay <= 0) {
-					if (!have_locks)
-						return 1;
-
-					/* link down for too long time */
-					slave->link = BOND_LINK_DOWN;
-
-					/* in active/backup mode, we must
-					 * completely disable this interface
-					 */
-					if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) ||
-					    (bond->params.mode == BOND_MODE_8023AD)) {
-						bond_set_slave_inactive_flags(slave);
-					}
-
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status definitely "
-					       "down for interface %s, "
-					       "disabling it\n",
-					       bond->dev->name,
-					       slave_dev->name);
-
-					/* notify ad that the link status has changed */
-					if (bond->params.mode == BOND_MODE_8023AD) {
-						bond_3ad_handle_link_change(slave, BOND_LINK_DOWN);
-					}
-
-					if ((bond->params.mode == BOND_MODE_TLB) ||
-					    (bond->params.mode == BOND_MODE_ALB)) {
-						bond_alb_handle_link_change(bond, slave, BOND_LINK_DOWN);
-					}
-
-					if (slave == oldcurrent) {
-						do_failover = 1;
-					}
-				} else {
-					slave->delay--;
-				}
-			} else {
-				/* link up again */
-				slave->link  = BOND_LINK_UP;
+			/*FALLTHRU*/
+		case BOND_LINK_FAIL:
+			if (link_state) {
+				/*
+				 * recovered before downdelay expired
+				 */
+				slave->link = BOND_LINK_UP;
 				slave->jiffies = jiffies;
 				printk(KERN_INFO DRV_NAME
 				       ": %s: link status up again after %d "
 				       "ms for interface %s.\n",
 				       bond->dev->name,
-				       (bond->params.downdelay - slave->delay) * bond->params.miimon,
-				       slave_dev->name);
+				       (bond->params.downdelay - slave->delay) *
+				       bond->params.miimon,
+				       slave->dev->name);
+				continue;
 			}
-			break;
-		case BOND_LINK_DOWN:	/* the link was down */
-			if (link_state != BMSR_LSTATUS) {
-				/* the link stays down, nothing more to do */
-				break;
-			} else {	/* link going up */
-				slave->link  = BOND_LINK_BACK;
-				slave->delay = bond->params.updelay;
 
-				if (bond->params.updelay) {
-					/* if updelay == 0, no need to
-					   advertise about a 0 ms delay */
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status up for "
-					       "interface %s, enabling it "
-					       "in %d ms.\n",
-					       bond->dev->name,
-					       slave_dev->name,
-					       bond->params.updelay * bond->params.miimon);
-				}
+			if (slave->delay <= 0) {
+				slave->new_link = BOND_LINK_DOWN;
+				commit++;
+				continue;
 			}
-			/* no break ! fall through the BOND_LINK_BACK state in
-			   case there's something to do.
-			*/
-		case BOND_LINK_BACK:	/* the link has just come back */
-			if (link_state != BMSR_LSTATUS) {
-				/* link down again */
-				slave->link  = BOND_LINK_DOWN;
 
+			slave->delay--;
+			break;
+
+		case BOND_LINK_DOWN:
+			if (!link_state)
+				continue;
+
+			slave->link = BOND_LINK_BACK;
+			slave->delay = bond->params.updelay;
+
+			if (slave->delay) {
+				printk(KERN_INFO DRV_NAME
+				       ": %s: link status up for "
+				       "interface %s, enabling it in %d ms.\n",
+				       bond->dev->name, slave->dev->name,
+				       bond->params.updelay *
+				       bond->params.miimon);
+			}
+			/*FALLTHRU*/
+		case BOND_LINK_BACK:
+			if (!link_state) {
+				slave->link = BOND_LINK_DOWN;
 				printk(KERN_INFO DRV_NAME
 				       ": %s: link status down again after %d "
 				       "ms for interface %s.\n",
 				       bond->dev->name,
-				       (bond->params.updelay - slave->delay) * bond->params.miimon,
-				       slave_dev->name);
-			} else {
-				/* link stays up */
-				if (slave->delay == 0) {
-					if (!have_locks)
-						return 1;
-
-					/* now the link has been up for long time enough */
-					slave->link = BOND_LINK_UP;
-					slave->jiffies = jiffies;
-
-					if (bond->params.mode == BOND_MODE_8023AD) {
-						/* prevent it from being the active one */
-						slave->state = BOND_STATE_BACKUP;
-					} else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
-						/* make it immediately active */
-						slave->state = BOND_STATE_ACTIVE;
-					} else if (slave != bond->primary_slave) {
-						/* prevent it from being the active one */
-						slave->state = BOND_STATE_BACKUP;
-					}
+				       (bond->params.updelay - slave->delay) *
+				       bond->params.miimon,
+				       slave->dev->name);
 
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status definitely "
-					       "up for interface %s.\n",
-					       bond->dev->name,
-					       slave_dev->name);
-
-					/* notify ad that the link status has changed */
-					if (bond->params.mode == BOND_MODE_8023AD) {
-						bond_3ad_handle_link_change(slave, BOND_LINK_UP);
-					}
-
-					if ((bond->params.mode == BOND_MODE_TLB) ||
-					    (bond->params.mode == BOND_MODE_ALB)) {
-						bond_alb_handle_link_change(bond, slave, BOND_LINK_UP);
-					}
-
-					if ((!oldcurrent) ||
-					    (slave == bond->primary_slave)) {
-						do_failover = 1;
-					}
-				} else {
-					slave->delay--;
-				}
+				continue;
 			}
+
+			if (slave->delay <= 0) {
+				slave->new_link = BOND_LINK_UP;
+				commit++;
+				continue;
+			}
+
+			slave->delay--;
 			break;
-		default:
-			/* Should not happen */
-			printk(KERN_ERR DRV_NAME
-			       ": %s: Error: %s Illegal value (link=%d)\n",
-			       bond->dev->name,
-			       slave->dev->name,
-			       slave->link);
-			goto out;
-		} /* end of switch (slave->link) */
+		}
+	}
 
-		bond_update_speed_duplex(slave);
+	return commit;
+}
 
-		if (bond->params.mode == BOND_MODE_8023AD) {
-			if (old_speed != slave->speed) {
-				bond_3ad_adapter_speed_changed(slave);
-			}
+static void bond_miimon_commit(struct bonding *bond)
+{
+	struct slave *slave;
+	int i;
+
+	bond_for_each_slave(bond, slave, i) {
+		switch (slave->new_link) {
+		case BOND_LINK_NOCHANGE:
+			continue;
+
+		case BOND_LINK_UP:
+			slave->link = BOND_LINK_UP;
+			slave->jiffies = jiffies;
 
-			if (old_duplex != slave->duplex) {
-				bond_3ad_adapter_duplex_changed(slave);
+			if (bond->params.mode == BOND_MODE_8023AD) {
+				/* prevent it from being the active one */
+				slave->state = BOND_STATE_BACKUP;
+			} else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
+				/* make it immediately active */
+				slave->state = BOND_STATE_ACTIVE;
+			} else if (slave != bond->primary_slave) {
+				/* prevent it from being the active one */
+				slave->state = BOND_STATE_BACKUP;
 			}
-		}
 
-	} /* end of for */
+			printk(KERN_INFO DRV_NAME
+			       ": %s: link status definitely "
+			       "up for interface %s.\n",
+			       bond->dev->name, slave->dev->name);
 
-	if (do_failover) {
-		ASSERT_RTNL();
+			/* notify ad that the link status has changed */
+			if (bond->params.mode == BOND_MODE_8023AD)
+				bond_3ad_handle_link_change(slave, BOND_LINK_UP);
 
-		write_lock_bh(&bond->curr_slave_lock);
+			if ((bond->params.mode == BOND_MODE_TLB) ||
+			    (bond->params.mode == BOND_MODE_ALB))
+				bond_alb_handle_link_change(bond, slave,
+							    BOND_LINK_UP);
 
-		bond_select_active_slave(bond);
+			if (!bond->curr_active_slave ||
+			    (slave == bond->primary_slave))
+				goto do_failover;
 
-		write_unlock_bh(&bond->curr_slave_lock);
+			continue;
 
-	} else
-		bond_set_carrier(bond);
+		case BOND_LINK_DOWN:
+			slave->link = BOND_LINK_DOWN;
 
-out:
-	return 0;
+			if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
+			    bond->params.mode == BOND_MODE_8023AD)
+				bond_set_slave_inactive_flags(slave);
+
+			printk(KERN_INFO DRV_NAME
+			       ": %s: link status definitely down for "
+			       "interface %s, disabling it\n",
+			       bond->dev->name, slave->dev->name);
+
+			if (bond->params.mode == BOND_MODE_8023AD)
+				bond_3ad_handle_link_change(slave,
+							    BOND_LINK_DOWN);
+
+			if (bond->params.mode == BOND_MODE_TLB ||
+			    bond->params.mode == BOND_MODE_ALB)
+				bond_alb_handle_link_change(bond, slave,
+							    BOND_LINK_DOWN);
+
+			if (slave == bond->curr_active_slave)
+				goto do_failover;
+
+			continue;
+
+		default:
+			printk(KERN_ERR DRV_NAME
+			       ": %s: invalid new link %d on slave %s\n",
+			       bond->dev->name, slave->new_link,
+			       slave->dev->name);
+			slave->new_link = BOND_LINK_NOCHANGE;
+
+			continue;
+		}
+
+do_failover:
+		ASSERT_RTNL();
+		write_lock_bh(&bond->curr_slave_lock);
+		bond_select_active_slave(bond);
+		write_unlock_bh(&bond->curr_slave_lock);
+	}
+
+	bond_set_carrier(bond);
 }
 
 /*
  * bond_mii_monitor
  *
  * Really a wrapper that splits the mii monitor into two phases: an
- * inspection, then (if inspection indicates something needs to be
- * done) an acquisition of appropriate locks followed by another pass
- * to implement whatever link state changes are indicated.
+ * inspection, then (if inspection indicates something needs to be done)
+ * an acquisition of appropriate locks followed by a commit phase to
+ * implement whatever link state changes are indicated.
  */
 void bond_mii_monitor(struct work_struct *work)
 {
 	struct bonding *bond = container_of(work, struct bonding,
 					    mii_work.work);
-	unsigned long delay;
 
 	read_lock(&bond->lock);
-	if (bond->kill_timers) {
-		read_unlock(&bond->lock);
-		return;
-	}
+	if (bond->kill_timers)
+		goto out;
+
+	if (bond->slave_cnt == 0)
+		goto re_arm;
 
 	if (bond->send_grat_arp) {
 		read_lock(&bond->curr_slave_lock);
@@ -2496,19 +2441,24 @@ void bond_mii_monitor(struct work_struct *work)
 		read_unlock(&bond->curr_slave_lock);
 	}
 
-	if (__bond_mii_monitor(bond, 0)) {
+	if (bond_miimon_inspect(bond)) {
 		read_unlock(&bond->lock);
 		rtnl_lock();
 		read_lock(&bond->lock);
-		__bond_mii_monitor(bond, 1);
+
+		bond_miimon_commit(bond);
+
 		read_unlock(&bond->lock);
 		rtnl_unlock();	/* might sleep, hold no other locks */
 		read_lock(&bond->lock);
 	}
 
-	delay = msecs_to_jiffies(bond->params.miimon);
+re_arm:
+	if (bond->params.miimon)
+		queue_delayed_work(bond->wq, &bond->mii_work,
+				   msecs_to_jiffies(bond->params.miimon));
+out:
 	read_unlock(&bond->lock);
-	queue_delayed_work(bond->wq, &bond->mii_work, delay);
 }
 
 static __be32 bond_glean_dev_ip(struct net_device *dev)
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 6caac0ffb2f..3bdb4738252 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -350,9 +350,6 @@ static ssize_t bonding_store_slaves(struct device *d,
 		if (dev) {
 			printk(KERN_INFO DRV_NAME ": %s: Removing slave %s\n",
 				bond->dev->name, dev->name);
-			if (bond->setup_by_slave)
-				res = bond_release_and_destroy(bond->dev, dev);
-			else
 				res = bond_release(bond->dev, dev);
 			if (res) {
 				ret = res;
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index a7800e55909..ec6b0af3d46 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -26,7 +26,6 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index fba87abe78e..ea6144a9565 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -189,7 +189,7 @@ static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
 #elif defined(CONFIG_ARCH_PNX010X)
 #include <asm/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 #define CIRRUS_DEFAULT_BASE	IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000)	/* = Physical address 0x48200000 */
 #define CIRRUS_DEFAULT_IRQ	VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
 static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 47d51788a46..04c0e90119a 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -683,7 +683,7 @@ enum {
 	SF_ERASE_SECTOR = 0xd8,	/* erase sector */
 
 	FW_FLASH_BOOT_ADDR = 0x70000,	/* start address of FW in flash */
-	FW_VERS_ADDR = 0x77ffc,    /* flash address holding FW version */
+	FW_VERS_ADDR = 0x7fffc,    /* flash address holding FW version */
 	FW_MIN_SIZE = 8            /* at least version and csum */
 };
 
diff --git a/drivers/net/de620.c b/drivers/net/de620.c
index 3f5190c654c..d454e143483 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/de620.c
@@ -488,13 +488,6 @@ static void de620_set_multicast_list(struct net_device *dev)
 {
 	if (dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
 	{ /* Enable promiscuous mode */
-		/*
-		 *	We must make the kernel realise we had to move
-		 *	into promisc mode or we start all out war on
-		 *	the cable. - AC
-		 */
-		dev->flags|=IFF_PROMISC;
-
 		de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL);
 	}
 	else
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 0b0f1c407a7..f42c23f4265 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -1374,6 +1374,11 @@ dm9000_probe(struct platform_device *pdev)
 	for (i = 0; i < 6; i += 2)
 		dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i);
 
+	if (!is_valid_ether_addr(ndev->dev_addr) && pdata != NULL) {
+		mac_src = "platform data";
+		memcpy(ndev->dev_addr, pdata->dev_addr, 6);
+	}
+
 	if (!is_valid_ether_addr(ndev->dev_addr)) {
 		/* try reading from mac */
 		
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 19d32a227be..5cf78d612c4 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1838,7 +1838,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 		if ((le16_to_cpu(rfd->command) & cb_el) &&
 		    (RU_RUNNING == nic->ru_running))
 
-			if (readb(&nic->csr->scb.status) & rus_no_res)
+			if (ioread8(&nic->csr->scb.status) & rus_no_res)
 				nic->ru_running = RU_SUSPENDED;
 		return -ENODATA;
 	}
@@ -1861,7 +1861,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	if ((le16_to_cpu(rfd->command) & cb_el) &&
 	    (RU_RUNNING == nic->ru_running)) {
 
-	    if (readb(&nic->csr->scb.status) & rus_no_res)
+	    if (ioread8(&nic->csr->scb.status) & rus_no_res)
 		nic->ru_running = RU_SUSPENDED;
 	}
 
@@ -2738,9 +2738,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 		nic->flags |= wol_magic;
 
 	/* ack any pending wake events, disable PME */
-	err = pci_enable_wake(pdev, 0, 0);
-	if (err)
-		DPRINTK(PROBE, ERR, "Error clearing wake event\n");
+	pci_pme_active(pdev, false);
 
 	strcpy(netdev->name, "eth%d");
 	if((err = register_netdev(netdev))) {
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 9d6edf3e73f..d04eef53571 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -144,6 +144,8 @@ static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer);
 static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
 static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex);
 static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
 
 /* IGP cable length table */
 static const
@@ -168,6 +170,8 @@ u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
       83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
       104, 109, 114, 118, 121, 124};
 
+static DEFINE_SPINLOCK(e1000_eeprom_lock);
+
 /******************************************************************************
  * Set the phy type member in the hw struct.
  *
@@ -4904,6 +4908,15 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
  *****************************************************************************/
 s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
+    s32 ret;
+    spin_lock(&e1000_eeprom_lock);
+    ret = e1000_do_read_eeprom(hw, offset, words, data);
+    spin_unlock(&e1000_eeprom_lock);
+    return ret;
+}
+
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     u32 i = 0;
 
@@ -5236,6 +5249,16 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
  *****************************************************************************/
 s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
+    s32 ret;
+    spin_lock(&e1000_eeprom_lock);
+    ret = e1000_do_write_eeprom(hw, offset, words, data);
+    spin_unlock(&e1000_eeprom_lock);
+    return ret;
+}
+
+
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     s32 status = 0;
 
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index b9f90a5d3d4..213437d1315 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -208,7 +208,7 @@ struct e1000_option {
 		} r;
 		struct { /* list_option info */
 			int nr;
-			struct e1000_opt_list { int i; char *str; } *p;
+			const struct e1000_opt_list { int i; char *str; } *p;
 		} l;
 	} arg;
 };
@@ -242,7 +242,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
 		break;
 	case list_option: {
 		int i;
-		struct e1000_opt_list *ent;
+		const struct e1000_opt_list *ent;
 
 		for (i = 0; i < opt->arg.l.nr; i++) {
 			ent = &opt->arg.l.p[i];
@@ -279,7 +279,9 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter);
 
 void __devinit e1000_check_options(struct e1000_adapter *adapter)
 {
+	struct e1000_option opt;
 	int bd = adapter->bd_number;
+
 	if (bd >= E1000_MAX_NIC) {
 		DPRINTK(PROBE, NOTICE,
 		       "Warning: no configuration for board #%i\n", bd);
@@ -287,19 +289,21 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 	}
 
 	{ /* Transmit Descriptor Count */
-		struct e1000_option opt = {
+		struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+		int i;
+		e1000_mac_type mac_type = adapter->hw.mac_type;
+
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Transmit Descriptors",
 			.err  = "using default of "
 				__MODULE_STRING(E1000_DEFAULT_TXD),
 			.def  = E1000_DEFAULT_TXD,
-			.arg  = { .r = { .min = E1000_MIN_TXD }}
+			.arg  = { .r = {
+				.min = E1000_MIN_TXD,
+				.max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD
+				}}
 		};
-		struct e1000_tx_ring *tx_ring = adapter->tx_ring;
-		int i;
-		e1000_mac_type mac_type = adapter->hw.mac_type;
-		opt.arg.r.max = mac_type < e1000_82544 ?
-			E1000_MAX_TXD : E1000_MAX_82544_TXD;
 
 		if (num_TxDescriptors > bd) {
 			tx_ring->count = TxDescriptors[bd];
@@ -313,19 +317,21 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			tx_ring[i].count = tx_ring->count;
 	}
 	{ /* Receive Descriptor Count */
-		struct e1000_option opt = {
+		struct e1000_rx_ring *rx_ring = adapter->rx_ring;
+		int i;
+		e1000_mac_type mac_type = adapter->hw.mac_type;
+
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Receive Descriptors",
 			.err  = "using default of "
 				__MODULE_STRING(E1000_DEFAULT_RXD),
 			.def  = E1000_DEFAULT_RXD,
-			.arg  = { .r = { .min = E1000_MIN_RXD }}
+			.arg  = { .r = {
+				.min = E1000_MIN_RXD,
+				.max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
+			}}
 		};
-		struct e1000_rx_ring *rx_ring = adapter->rx_ring;
-		int i;
-		e1000_mac_type mac_type = adapter->hw.mac_type;
-		opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
-			E1000_MAX_82544_RXD;
 
 		if (num_RxDescriptors > bd) {
 			rx_ring->count = RxDescriptors[bd];
@@ -339,7 +345,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			rx_ring[i].count = rx_ring->count;
 	}
 	{ /* Checksum Offload Enable/Disable */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = enable_option,
 			.name = "Checksum Offload",
 			.err  = "defaulting to Enabled",
@@ -363,7 +369,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			 { E1000_FC_FULL,    "Flow Control Enabled" },
 			 { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "Flow Control",
 			.err  = "reading default settings from EEPROM",
@@ -381,7 +387,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Transmit Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Transmit Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_TIDV),
@@ -399,7 +405,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Transmit Absolute Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Transmit Absolute Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_TADV),
@@ -417,7 +423,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Receive Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Receive Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_RDTR),
@@ -435,7 +441,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Receive Absolute Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Receive Absolute Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_RADV),
@@ -453,7 +459,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Interrupt Throttling Rate */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Interrupt Throttling Rate (ints/sec)",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_ITR),
@@ -497,7 +503,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Smart Power Down */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = enable_option,
 			.name = "PHY Smart Power Down",
 			.err  = "defaulting to Disabled",
@@ -513,7 +519,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Kumeran Lock Loss Workaround */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = enable_option,
 			.name = "Kumeran Lock Loss Workaround",
 			.err  = "defaulting to Enabled",
@@ -578,16 +584,18 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
 
 static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 {
+	struct e1000_option opt;
 	unsigned int speed, dplx, an;
 	int bd = adapter->bd_number;
 
 	{ /* Speed */
-		struct e1000_opt_list speed_list[] = {{          0, "" },
-						      {   SPEED_10, "" },
-						      {  SPEED_100, "" },
-						      { SPEED_1000, "" }};
+		static const struct e1000_opt_list speed_list[] = {
+			{          0, "" },
+			{   SPEED_10, "" },
+			{  SPEED_100, "" },
+			{ SPEED_1000, "" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "Speed",
 			.err  = "parameter ignored",
@@ -604,11 +612,12 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Duplex */
-		struct e1000_opt_list dplx_list[] = {{           0, "" },
-						     { HALF_DUPLEX, "" },
-						     { FULL_DUPLEX, "" }};
+		static const struct e1000_opt_list dplx_list[] = {
+			{           0, "" },
+			{ HALF_DUPLEX, "" },
+			{ FULL_DUPLEX, "" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "Duplex",
 			.err  = "parameter ignored",
@@ -637,7 +646,7 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 		       "parameter ignored\n");
 		adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
 	} else { /* Autoneg */
-		struct e1000_opt_list an_list[] =
+		static const struct e1000_opt_list an_list[] =
 			#define AA "AutoNeg advertising "
 			{{ 0x01, AA "10/HD" },
 			 { 0x02, AA "10/FD" },
@@ -671,7 +680,7 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 			 { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
 			 { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "AutoNeg",
 			.err  = "parameter ignored",
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index f823b8ba578..14b0e6cd3b8 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -389,7 +389,7 @@
 
 /* Interrupt Cause Set */
 #define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */
-#define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
+#define E1000_ICS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */
 #define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */
 
 /* Transmit Descriptor Control */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 4a4f62e002b..ac4e506b4f8 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -41,24 +41,25 @@
 
 struct e1000_info;
 
-#define ndev_printk(level, netdev, format, arg...) \
-	printk(level "%s: " format, (netdev)->name, ## arg)
+#define e_printk(level, adapter, format, arg...) \
+	printk(level "%s: %s: " format, pci_name(adapter->pdev), \
+	       adapter->netdev->name, ## arg)
 
 #ifdef DEBUG
-#define ndev_dbg(netdev, format, arg...) \
-	ndev_printk(KERN_DEBUG , netdev, format, ## arg)
+#define e_dbg(format, arg...) \
+	e_printk(KERN_DEBUG , adapter, format, ## arg)
 #else
-#define ndev_dbg(netdev, format, arg...) do { (void)(netdev); } while (0)
+#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
 #endif
 
-#define ndev_err(netdev, format, arg...) \
-	ndev_printk(KERN_ERR , netdev, format, ## arg)
-#define ndev_info(netdev, format, arg...) \
-	ndev_printk(KERN_INFO , netdev, format, ## arg)
-#define ndev_warn(netdev, format, arg...) \
-	ndev_printk(KERN_WARNING , netdev, format, ## arg)
-#define ndev_notice(netdev, format, arg...) \
-	ndev_printk(KERN_NOTICE , netdev, format, ## arg)
+#define e_err(format, arg...) \
+	e_printk(KERN_ERR, adapter, format, ## arg)
+#define e_info(format, arg...) \
+	e_printk(KERN_INFO, adapter, format, ## arg)
+#define e_warn(format, arg...) \
+	e_printk(KERN_WARNING, adapter, format, ## arg)
+#define e_notice(format, arg...) \
+	e_printk(KERN_NOTICE, adapter, format, ## arg)
 
 
 /* Tx/Rx descriptor defines */
@@ -283,10 +284,6 @@ struct e1000_adapter {
 	unsigned long led_status;
 
 	unsigned int flags;
-
-	/* for ioport free */
-	int bars;
-	int need_ioport;
 };
 
 struct e1000_info {
@@ -329,6 +326,7 @@ struct e1000_info {
 #define FLAG_RX_CSUM_ENABLED              (1 << 28)
 #define FLAG_TSO_FORCE                    (1 << 29)
 #define FLAG_RX_RESTART_NOW               (1 << 30)
+#define FLAG_MSI_TEST_FAILED              (1 << 31)
 
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 9350564065e..e21c9e0f373 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -177,7 +177,7 @@ static u32 e1000_get_link(struct net_device *netdev)
 	u32 status;
 	
 	status = er32(STATUS);
-	return (status & E1000_STATUS_LU);
+	return (status & E1000_STATUS_LU) ? 1 : 0;
 }
 
 static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
@@ -189,8 +189,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 	/* Fiber NICs only allow 1000 gbps Full duplex */
 	if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
 		spddplx != (SPEED_1000 + DUPLEX_FULL)) {
-		ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
-			 "configuration\n");
+		e_err("Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;
 	}
 
@@ -213,8 +212,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 		break;
 	case SPEED_1000 + DUPLEX_HALF: /* not supported */
 	default:
-		ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
-			 "configuration\n");
+		e_err("Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -231,8 +229,8 @@ static int e1000_set_settings(struct net_device *netdev,
 	 * cannot be changed
 	 */
 	if (e1000_check_reset_block(hw)) {
-		ndev_err(netdev, "Cannot change link "
-			 "characteristics when SoL/IDER is active.\n");
+		e_err("Cannot change link characteristics when SoL/IDER is "
+		      "active.\n");
 		return -EINVAL;
 	}
 
@@ -380,8 +378,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
 		netdev->features &= ~NETIF_F_TSO6;
 	}
 
-	ndev_info(netdev, "TSO is %s\n",
-		  data ? "Enabled" : "Disabled");
+	e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
 	adapter->flags |= FLAG_TSO_FORCE;
 	return 0;
 }
@@ -722,10 +719,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
 				      (test[pat] & write));
 		val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
 		if (val != (test[pat] & write & mask)) {
-			ndev_err(adapter->netdev, "pattern test reg %04X "
-				 "failed: got 0x%08X expected 0x%08X\n",
-				 reg + offset,
-				 val, (test[pat] & write & mask));
+			e_err("pattern test reg %04X failed: got 0x%08X "
+			      "expected 0x%08X\n", reg + offset, val,
+			      (test[pat] & write & mask));
 			*data = reg;
 			return 1;
 		}
@@ -740,9 +736,8 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
 	__ew32(&adapter->hw, reg, write & mask);
 	val = __er32(&adapter->hw, reg);
 	if ((write & mask) != (val & mask)) {
-		ndev_err(adapter->netdev, "set/check reg %04X test failed: "
-			 "got 0x%08X expected 0x%08X\n", reg, (val & mask),
-			 (write & mask));
+		e_err("set/check reg %04X test failed: got 0x%08X "
+		      "expected 0x%08X\n", reg, (val & mask), (write & mask));
 		*data = reg;
 		return 1;
 	}
@@ -766,7 +761,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_mac_info *mac = &adapter->hw.mac;
-	struct net_device *netdev = adapter->netdev;
 	u32 value;
 	u32 before;
 	u32 after;
@@ -799,8 +793,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	ew32(STATUS, toggle);
 	after = er32(STATUS) & toggle;
 	if (value != after) {
-		ndev_err(netdev, "failed STATUS register test got: "
-			 "0x%08X expected: 0x%08X\n", after, value);
+		e_err("failed STATUS register test got: 0x%08X expected: "
+		      "0x%08X\n", after, value);
 		*data = 1;
 		return 1;
 	}
@@ -903,8 +897,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 		*data = 1;
 		return -1;
 	}
-	ndev_info(netdev, "testing %s interrupt\n",
-		  (shared_int ? "shared" : "unshared"));
+	e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
@@ -1526,8 +1519,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
 	 * sessions are active
 	 */
 	if (e1000_check_reset_block(&adapter->hw)) {
-		ndev_err(adapter->netdev, "Cannot do PHY loopback test "
-			 "when SoL/IDER is active.\n");
+		e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
 		*data = 0;
 		goto out;
 	}
@@ -1612,7 +1604,7 @@ static void e1000_diag_test(struct net_device *netdev,
 		forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
 		autoneg = adapter->hw.mac.autoneg;
 
-		ndev_info(netdev, "offline testing starting\n");
+		e_info("offline testing starting\n");
 
 		/*
 		 * Link test performed before hardware reset so autoneg doesn't
@@ -1658,7 +1650,7 @@ static void e1000_diag_test(struct net_device *netdev,
 		if (if_running)
 			dev_open(netdev);
 	} else {
-		ndev_info(netdev, "online testing starting\n");
+		e_info("online testing starting\n");
 		/* Online tests */
 		if (e1000_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1694,8 +1686,8 @@ static void e1000_get_wol(struct net_device *netdev,
 		wol->supported &= ~WAKE_UCAST;
 
 		if (adapter->wol & E1000_WUFC_EX)
-			ndev_err(netdev, "Interface does not support "
-				 "directed (unicast) frame wake-up packets\n");
+			e_err("Interface does not support directed (unicast) "
+			      "frame wake-up packets\n");
 	}
 
 	if (adapter->wol & E1000_WUFC_EX)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index d1367789976..d266510c8a9 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		 * packet, also make sure the frame isn't just CRC only */
 		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
 			/* All receives must fit into a single buffer */
-			ndev_dbg(netdev, "%s: Receive packet consumed "
-				 "multiple buffers\n", netdev->name);
+			e_dbg("%s: Receive packet consumed multiple buffers\n",
+			      netdev->name);
 			/* recycle */
 			buffer_info->skb = skb;
 			goto next_desc;
@@ -510,9 +510,12 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
 			if (new_skb) {
 				skb_reserve(new_skb, NET_IP_ALIGN);
-				memcpy(new_skb->data - NET_IP_ALIGN,
-				       skb->data - NET_IP_ALIGN,
-				       length + NET_IP_ALIGN);
+				skb_copy_to_linear_data_offset(new_skb,
+							       -NET_IP_ALIGN,
+							       (skb->data -
+								NET_IP_ALIGN),
+							       (length +
+								NET_IP_ALIGN));
 				/* save the skb in buffer_info as good */
 				buffer_info->skb = skb;
 				skb = new_skb;
@@ -576,28 +579,26 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter)
 	unsigned int i = tx_ring->next_to_clean;
 	unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
 	struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
-	struct net_device *netdev = adapter->netdev;
 
 	/* detected Tx unit hang */
-	ndev_err(netdev,
-		 "Detected Tx Unit Hang:\n"
-		 "  TDH                  <%x>\n"
-		 "  TDT                  <%x>\n"
-		 "  next_to_use          <%x>\n"
-		 "  next_to_clean        <%x>\n"
-		 "buffer_info[next_to_clean]:\n"
-		 "  time_stamp           <%lx>\n"
-		 "  next_to_watch        <%x>\n"
-		 "  jiffies              <%lx>\n"
-		 "  next_to_watch.status <%x>\n",
-		 readl(adapter->hw.hw_addr + tx_ring->head),
-		 readl(adapter->hw.hw_addr + tx_ring->tail),
-		 tx_ring->next_to_use,
-		 tx_ring->next_to_clean,
-		 tx_ring->buffer_info[eop].time_stamp,
-		 eop,
-		 jiffies,
-		 eop_desc->upper.fields.status);
+	e_err("Detected Tx Unit Hang:\n"
+	      "  TDH                  <%x>\n"
+	      "  TDT                  <%x>\n"
+	      "  next_to_use          <%x>\n"
+	      "  next_to_clean        <%x>\n"
+	      "buffer_info[next_to_clean]:\n"
+	      "  time_stamp           <%lx>\n"
+	      "  next_to_watch        <%x>\n"
+	      "  jiffies              <%lx>\n"
+	      "  next_to_watch.status <%x>\n",
+	      readl(adapter->hw.hw_addr + tx_ring->head),
+	      readl(adapter->hw.hw_addr + tx_ring->tail),
+	      tx_ring->next_to_use,
+	      tx_ring->next_to_clean,
+	      tx_ring->buffer_info[eop].time_stamp,
+	      eop,
+	      jiffies,
+	      eop_desc->upper.fields.status);
 }
 
 /**
@@ -747,8 +748,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		buffer_info->dma = 0;
 
 		if (!(staterr & E1000_RXD_STAT_EOP)) {
-			ndev_dbg(netdev, "%s: Packet Split buffers didn't pick "
-				 "up the full packet\n", netdev->name);
+			e_dbg("%s: Packet Split buffers didn't pick up the "
+			      "full packet\n", netdev->name);
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -761,8 +762,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		length = le16_to_cpu(rx_desc->wb.middle.length0);
 
 		if (!length) {
-			ndev_dbg(netdev, "%s: Last part of the packet spanning"
-				 " multiple descriptors\n", netdev->name);
+			e_dbg("%s: Last part of the packet spanning multiple "
+			      "descriptors\n", netdev->name);
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -1011,7 +1012,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 
 		/* eth type trans needs skb->data to point to something */
 		if (!pskb_may_pull(skb, ETH_HLEN)) {
-			ndev_err(netdev, "pskb_may_pull failed.\n");
+			e_err("pskb_may_pull failed.\n");
 			dev_kfree_skb(skb);
 			goto next_desc;
 		}
@@ -1235,28 +1236,36 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+/**
+ * e1000_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
 static int e1000_request_irq(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	irq_handler_t handler = e1000_intr;
 	int irq_flags = IRQF_SHARED;
 	int err;
 
-	if (!pci_enable_msi(adapter->pdev)) {
-		adapter->flags |= FLAG_MSI_ENABLED;
-		handler = e1000_intr_msi;
-		irq_flags = 0;
+	if (!(adapter->flags & FLAG_MSI_TEST_FAILED)) {
+		err = pci_enable_msi(adapter->pdev);
+		if (!err) {
+			adapter->flags |= FLAG_MSI_ENABLED;
+			irq_flags = 0;
+		}
 	}
 
-	err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
-			  netdev);
+	err = request_irq(adapter->pdev->irq,
+			  ((adapter->flags & FLAG_MSI_ENABLED) ?
+				&e1000_intr_msi : &e1000_intr),
+			  irq_flags, netdev->name, netdev);
 	if (err) {
-		ndev_err(netdev,
-		       "Unable to allocate %s interrupt (return: %d)\n",
-			adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",
-			err);
-		if (adapter->flags & FLAG_MSI_ENABLED)
+		if (adapter->flags & FLAG_MSI_ENABLED) {
 			pci_disable_msi(adapter->pdev);
+			adapter->flags &= ~FLAG_MSI_ENABLED;
+		}
+		e_err("Unable to allocate interrupt, Error: %d\n", err);
 	}
 
 	return err;
@@ -1395,8 +1404,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
 	return 0;
 err:
 	vfree(tx_ring->buffer_info);
-	ndev_err(adapter->netdev,
-	"Unable to allocate memory for the transmit descriptor ring\n");
+	e_err("Unable to allocate memory for the transmit descriptor ring\n");
 	return err;
 }
 
@@ -1450,8 +1458,7 @@ err_pages:
 	}
 err:
 	vfree(rx_ring->buffer_info);
-	ndev_err(adapter->netdev,
-	"Unable to allocate memory for the transmit descriptor ring\n");
+	e_err("Unable to allocate memory for the transmit descriptor ring\n");
 	return err;
 }
 
@@ -2450,13 +2457,13 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	 * For parts with AMT enabled, let the firmware know
 	 * that the network interface is in control
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_get_hw_control(adapter);
 
 	ew32(WUC, 0);
 
 	if (mac->ops.init_hw(hw))
-		ndev_err(adapter->netdev, "Hardware Error\n");
+		e_err("Hardware Error\n");
 
 	e1000_update_mng_vlan(adapter);
 
@@ -2591,13 +2598,142 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
 	return 0;
 
 err:
-	ndev_err(netdev, "Unable to allocate memory for queues\n");
+	e_err("Unable to allocate memory for queues\n");
 	kfree(adapter->rx_ring);
 	kfree(adapter->tx_ring);
 	return -ENOMEM;
 }
 
 /**
+ * e1000_intr_msi_test - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr_msi_test(int irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 icr = er32(ICR);
+
+	e_dbg("%s: icr is %08X\n", netdev->name, icr);
+	if (icr & E1000_ICR_RXSEQ) {
+		adapter->flags &= ~FLAG_MSI_TEST_FAILED;
+		wmb();
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * e1000_test_msi_interrupt - Returns 0 for successful test
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c
+ **/
+static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	int err;
+
+	/* poll_enable hasn't been called yet, so don't need disable */
+	/* clear any pending events */
+	er32(ICR);
+
+	/* free the real vector and request a test handler */
+	e1000_free_irq(adapter);
+
+	/* Assume that the test fails, if it succeeds then the test
+	 * MSI irq handler will unset this flag */
+	adapter->flags |= FLAG_MSI_TEST_FAILED;
+
+	err = pci_enable_msi(adapter->pdev);
+	if (err)
+		goto msi_test_failed;
+
+	err = request_irq(adapter->pdev->irq, &e1000_intr_msi_test, 0,
+			  netdev->name, netdev);
+	if (err) {
+		pci_disable_msi(adapter->pdev);
+		goto msi_test_failed;
+	}
+
+	wmb();
+
+	e1000_irq_enable(adapter);
+
+	/* fire an unusual interrupt on the test handler */
+	ew32(ICS, E1000_ICS_RXSEQ);
+	e1e_flush();
+	msleep(50);
+
+	e1000_irq_disable(adapter);
+
+	rmb();
+
+	if (adapter->flags & FLAG_MSI_TEST_FAILED) {
+		err = -EIO;
+		e_info("MSI interrupt test failed!\n");
+	}
+
+	free_irq(adapter->pdev->irq, netdev);
+	pci_disable_msi(adapter->pdev);
+
+	if (err == -EIO)
+		goto msi_test_failed;
+
+	/* okay so the test worked, restore settings */
+	e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
+msi_test_failed:
+	/* restore the original vector, even if it failed */
+	e1000_request_irq(adapter);
+	return err;
+}
+
+/**
+ * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c, called with e1000 interrupts disabled.
+ **/
+static int e1000_test_msi(struct e1000_adapter *adapter)
+{
+	int err;
+	u16 pci_cmd;
+
+	if (!(adapter->flags & FLAG_MSI_ENABLED))
+		return 0;
+
+	/* disable SERR in case the MSI write causes a master abort */
+	pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+	pci_write_config_word(adapter->pdev, PCI_COMMAND,
+			      pci_cmd & ~PCI_COMMAND_SERR);
+
+	err = e1000_test_msi_interrupt(adapter);
+
+	/* restore previous setting of command word */
+	pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
+
+	/* success ! */
+	if (!err)
+		return 0;
+
+	/* EIO means MSI test failed */
+	if (err != -EIO)
+		return err;
+
+	/* back to INTx mode */
+	e_warn("MSI interrupt test failed, using legacy interrupt.\n");
+
+	e1000_free_irq(adapter);
+
+	err = e1000_request_irq(adapter);
+
+	return err;
+}
+
+/**
  * e1000_open - Called when a network interface is made active
  * @netdev: network interface device structure
  *
@@ -2640,8 +2776,7 @@ static int e1000_open(struct net_device *netdev)
 	 * If AMT is enabled, let the firmware know that the network
 	 * interface is now open
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) &&
-	    e1000e_check_mng_mode(&adapter->hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_get_hw_control(adapter);
 
 	/*
@@ -2656,6 +2791,19 @@ static int e1000_open(struct net_device *netdev)
 	if (err)
 		goto err_req_irq;
 
+	/*
+	 * Work around PCIe errata with MSI interrupts causing some chipsets to
+	 * ignore e1000e MSI messages, which means we need to test our MSI
+	 * interrupt now
+	 */
+	{
+		err = e1000_test_msi(adapter);
+		if (err) {
+			e_err("Interrupt allocation failed\n");
+			goto err_req_irq;
+		}
+	}
+
 	/* From here on the code is the same as e1000e_up() */
 	clear_bit(__E1000_DOWN, &adapter->state);
 
@@ -2719,8 +2867,7 @@ static int e1000_close(struct net_device *netdev)
 	 * If AMT is enabled, let the firmware know that the network
 	 * interface is now closed
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) &&
-	    e1000e_check_mng_mode(&adapter->hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_release_hw_control(adapter);
 
 	return 0;
@@ -2917,8 +3064,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 		ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
 		ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
 		if (ret_val)
-			ndev_warn(adapter->netdev,
-				  "Error reading PHY register\n");
+			e_warn("Error reading PHY register\n");
 	} else {
 		/*
 		 * Do not read PHY registers if link is not up
@@ -2943,18 +3089,16 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 static void e1000_print_link_info(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	struct net_device *netdev = adapter->netdev;
 	u32 ctrl = er32(CTRL);
 
-	ndev_info(netdev,
-		"Link is Up %d Mbps %s, Flow Control: %s\n",
-		adapter->link_speed,
-		(adapter->link_duplex == FULL_DUPLEX) ?
-				"Full Duplex" : "Half Duplex",
-		((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
-				"RX/TX" :
-		((ctrl & E1000_CTRL_RFCE) ? "RX" :
-		((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
+	e_info("Link is Up %d Mbps %s, Flow Control: %s\n",
+	       adapter->link_speed,
+	       (adapter->link_duplex == FULL_DUPLEX) ?
+	                        "Full Duplex" : "Half Duplex",
+	       ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
+	                        "RX/TX" :
+	       ((ctrl & E1000_CTRL_RFCE) ? "RX" :
+	       ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
 }
 
 static bool e1000_has_link(struct e1000_adapter *adapter)
@@ -2994,8 +3138,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter)
 	if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
 	    (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
 		/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
-		ndev_info(adapter->netdev,
-			  "Gigabit has been disabled, downgrading speed\n");
+		e_info("Gigabit has been disabled, downgrading speed\n");
 	}
 
 	return link_active;
@@ -3067,7 +3210,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			case SPEED_10:
 				txb2b = 0;
 				netdev->tx_queue_len = 10;
-				adapter->tx_timeout_factor = 14;
+				adapter->tx_timeout_factor = 16;
 				break;
 			case SPEED_100:
 				txb2b = 0;
@@ -3096,8 +3239,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 				switch (adapter->link_speed) {
 				case SPEED_10:
 				case SPEED_100:
-					ndev_info(netdev,
-					"10/100 speed: disabling TSO\n");
+					e_info("10/100 speed: disabling TSO\n");
 					netdev->features &= ~NETIF_F_TSO;
 					netdev->features &= ~NETIF_F_TSO6;
 					break;
@@ -3130,7 +3272,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 		if (netif_carrier_ok(netdev)) {
 			adapter->link_speed = 0;
 			adapter->link_duplex = 0;
-			ndev_info(netdev, "Link is Down\n");
+			e_info("Link is Down\n");
 			netif_carrier_off(netdev);
 			netif_tx_stop_all_queues(netdev);
 			if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -3604,8 +3746,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 			pull_size = min((unsigned int)4, skb->data_len);
 			if (!__pskb_pull_tail(skb, pull_size)) {
-				ndev_err(netdev,
-					 "__pskb_pull_tail failed.\n");
+				e_err("__pskb_pull_tail failed.\n");
 				dev_kfree_skb_any(skb);
 				return NETDEV_TX_OK;
 			}
@@ -3735,27 +3876,27 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
 
-	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
+	if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
 	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-		ndev_err(netdev, "Invalid MTU setting\n");
+		e_err("Invalid MTU setting\n");
 		return -EINVAL;
 	}
 
 	/* Jumbo frame size limits */
 	if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
 		if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-			ndev_err(netdev, "Jumbo Frames not supported.\n");
+			e_err("Jumbo Frames not supported.\n");
 			return -EINVAL;
 		}
 		if (adapter->hw.phy.type == e1000_phy_ife) {
-			ndev_err(netdev, "Jumbo Frames not supported.\n");
+			e_err("Jumbo Frames not supported.\n");
 			return -EINVAL;
 		}
 	}
 
 #define MAX_STD_JUMBO_FRAME_SIZE 9234
 	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-		ndev_err(netdev, "MTU > 9216 not supported.\n");
+		e_err("MTU > 9216 not supported.\n");
 		return -EINVAL;
 	}
 
@@ -3792,8 +3933,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 		adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
 					 + ETH_FCS_LEN;
 
-	ndev_info(netdev, "changing MTU from %d to %d\n",
-		netdev->mtu, new_mtu);
+	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
 
 	if (netif_running(netdev))
@@ -4006,10 +4146,7 @@ static int e1000_resume(struct pci_dev *pdev)
 	pci_restore_state(pdev);
 	e1000e_disable_l1aspm(pdev);
 
-	if (adapter->need_ioport)
-		err = pci_enable_device(pdev);
-	else
-		err = pci_enable_device_mem(pdev);
+	err = pci_enable_device_mem(pdev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot enable PCI device from suspend\n");
@@ -4043,7 +4180,7 @@ static int e1000_resume(struct pci_dev *pdev)
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 	return 0;
@@ -4111,10 +4248,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 	int err;
 
 	e1000e_disable_l1aspm(pdev);
-	if (adapter->need_ioport)
-		err = pci_enable_device(pdev);
-	else
-		err = pci_enable_device_mem(pdev);
+	err = pci_enable_device_mem(pdev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot re-enable PCI device after reset.\n");
@@ -4162,8 +4296,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) ||
-	    !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 }
@@ -4175,36 +4308,40 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
 	u32 pba_num;
 
 	/* print bus type/speed/width info */
-	ndev_info(netdev, "(PCI Express:2.5GB/s:%s) "
-		  "%02x:%02x:%02x:%02x:%02x:%02x\n",
-		  /* bus width */
-		 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
-		  "Width x1"),
-		  /* MAC address */
-		  netdev->dev_addr[0], netdev->dev_addr[1],
-		  netdev->dev_addr[2], netdev->dev_addr[3],
-		  netdev->dev_addr[4], netdev->dev_addr[5]);
-	ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n",
-		  (hw->phy.type == e1000_phy_ife)
-		   ? "10/100" : "1000");
+	e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
+	       /* bus width */
+	       ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
+	        "Width x1"),
+	       /* MAC address */
+	       netdev->dev_addr[0], netdev->dev_addr[1],
+	       netdev->dev_addr[2], netdev->dev_addr[3],
+	       netdev->dev_addr[4], netdev->dev_addr[5]);
+	e_info("Intel(R) PRO/%s Network Connection\n",
+	       (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
 	e1000e_read_pba_num(hw, &pba_num);
-	ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
-		  hw->mac.type, hw->phy.type,
-		  (pba_num >> 8), (pba_num & 0xff));
+	e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
+	       hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
 }
 
-/**
- * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not
- * @pdev: PCI device information struct
- *
- * Returns true if an adapters needs ioport resources
- **/
-static int e1000e_is_need_ioport(struct pci_dev *pdev)
+static void e1000_eeprom_checks(struct e1000_adapter *adapter)
 {
-	switch (pdev->device) {
-	/* Currently there are no adapters that need ioport resources */
-	default:
-		return false;
+	struct e1000_hw *hw = &adapter->hw;
+	int ret_val;
+	u16 buf = 0;
+
+	if (hw->mac.type != e1000_82573)
+		return;
+
+	ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
+	if (!(le16_to_cpu(buf) & (1 << 0))) {
+		/* Deep Smart Power Down (DSPD) */
+		e_warn("Warning: detected DSPD enabled in EEPROM\n");
+	}
+
+	ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf);
+	if (le16_to_cpu(buf) & (3 << 2)) {
+		/* ASPM enable */
+		e_warn("Warning: detected ASPM enabled in EEPROM\n");
 	}
 }
 
@@ -4233,19 +4370,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	int i, err, pci_using_dac;
 	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
-	int bars, need_ioport;
 
 	e1000e_disable_l1aspm(pdev);
 
-	/* do not allocate ioport bars when not needed */
-	need_ioport = e1000e_is_need_ioport(pdev);
-	if (need_ioport) {
-		bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
-		err = pci_enable_device(pdev);
-	} else {
-		bars = pci_select_bars(pdev, IORESOURCE_MEM);
-		err = pci_enable_device_mem(pdev);
-	}
+	err = pci_enable_device_mem(pdev);
 	if (err)
 		return err;
 
@@ -4268,7 +4396,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		}
 	}
 
-	err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
+	err = pci_request_selected_regions(pdev,
+	                                  pci_select_bars(pdev, IORESOURCE_MEM),
+	                                  e1000e_driver_name);
 	if (err)
 		goto err_pci_reg;
 
@@ -4293,8 +4423,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->hw.adapter = adapter;
 	adapter->hw.mac.type = ei->mac;
 	adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
-	adapter->bars = bars;
-	adapter->need_ioport = need_ioport;
 
 	mmio_start = pci_resource_start(pdev, 0);
 	mmio_len = pci_resource_len(pdev, 0);
@@ -4366,8 +4494,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	}
 
 	if (e1000_check_reset_block(&adapter->hw))
-		ndev_info(netdev,
-			  "PHY reset is blocked due to SOL/IDER session.\n");
+		e_info("PHY reset is blocked due to SOL/IDER session.\n");
 
 	netdev->features = NETIF_F_SG |
 			   NETIF_F_HW_CSUM |
@@ -4411,25 +4538,26 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
 			break;
 		if (i == 2) {
-			ndev_err(netdev, "The NVM Checksum Is Not Valid\n");
+			e_err("The NVM Checksum Is Not Valid\n");
 			err = -EIO;
 			goto err_eeprom;
 		}
 	}
 
+	e1000_eeprom_checks(adapter);
+
 	/* copy the MAC address out of the NVM */
 	if (e1000e_read_mac_addr(&adapter->hw))
-		ndev_err(netdev, "NVM Read Error while reading MAC address\n");
+		e_err("NVM Read Error while reading MAC address\n");
 
 	memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
 	memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
 
 	if (!is_valid_ether_addr(netdev->perm_addr)) {
-		ndev_err(netdev, "Invalid MAC Address: "
-			 "%02x:%02x:%02x:%02x:%02x:%02x\n",
-			 netdev->perm_addr[0], netdev->perm_addr[1],
-			 netdev->perm_addr[2], netdev->perm_addr[3],
-			 netdev->perm_addr[4], netdev->perm_addr[5]);
+		e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+		      netdev->perm_addr[0], netdev->perm_addr[1],
+		      netdev->perm_addr[2], netdev->perm_addr[3],
+		      netdev->perm_addr[4], netdev->perm_addr[5]);
 		err = -EIO;
 		goto err_eeprom;
 	}
@@ -4499,8 +4627,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) ||
-	    !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 	/* tell the stack to leave us alone until e1000_open() is called */
@@ -4517,24 +4644,25 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	return 0;
 
 err_register:
-err_hw_init:
-	e1000_release_hw_control(adapter);
+	if (!(adapter->flags & FLAG_HAS_AMT))
+		e1000_release_hw_control(adapter);
 err_eeprom:
 	if (!e1000_check_reset_block(&adapter->hw))
 		e1000_phy_hw_reset(&adapter->hw);
+err_hw_init:
 
-	if (adapter->hw.flash_address)
-		iounmap(adapter->hw.flash_address);
-
-err_flashmap:
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
 err_sw_init:
+	if (adapter->hw.flash_address)
+		iounmap(adapter->hw.flash_address);
+err_flashmap:
 	iounmap(adapter->hw.hw_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_selected_regions(pdev, bars);
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -4582,7 +4710,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	iounmap(adapter->hw.hw_addr);
 	if (adapter->hw.flash_address)
 		iounmap(adapter->hw.flash_address);
-	pci_release_selected_regions(pdev, adapter->bars);
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 
 	free_netdev(netdev);
 
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index a66b92efcf8..ed912e023a7 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -27,6 +27,7 @@
 *******************************************************************************/
 
 #include <linux/netdevice.h>
+#include <linux/pci.h>
 
 #include "e1000.h"
 
@@ -162,17 +163,16 @@ static int __devinit e1000_validate_option(unsigned int *value,
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
-			ndev_info(adapter->netdev, "%s Enabled\n", opt->name);
+			e_info("%s Enabled\n", opt->name);
 			return 0;
 		case OPTION_DISABLED:
-			ndev_info(adapter->netdev, "%s Disabled\n", opt->name);
+			e_info("%s Disabled\n", opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-			ndev_info(adapter->netdev,
-					"%s set to %i\n", opt->name, *value);
+			e_info("%s set to %i\n", opt->name, *value);
 			return 0;
 		}
 		break;
@@ -184,8 +184,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
 			ent = &opt->arg.l.p[i];
 			if (*value == ent->i) {
 				if (ent->str[0] != '\0')
-					ndev_info(adapter->netdev, "%s\n",
-						  ent->str);
+					e_info("%s\n", ent->str);
 				return 0;
 			}
 		}
@@ -195,8 +194,8 @@ static int __devinit e1000_validate_option(unsigned int *value,
 		BUG();
 	}
 
-	ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n",
-	       opt->name, *value, opt->err);
+	e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
+	       opt->err);
 	*value = opt->def;
 	return -1;
 }
@@ -213,13 +212,11 @@ static int __devinit e1000_validate_option(unsigned int *value,
 void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	struct net_device *netdev = adapter->netdev;
 	int bd = adapter->bd_number;
 
 	if (bd >= E1000_MAX_NIC) {
-		ndev_notice(netdev,
-		       "Warning: no configuration for board #%i\n", bd);
-		ndev_notice(netdev, "Using defaults for all values\n");
+		e_notice("Warning: no configuration for board #%i\n", bd);
+		e_notice("Using defaults for all values\n");
 	}
 
 	{ /* Transmit Interrupt Delay */
@@ -313,32 +310,41 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 			adapter->itr = InterruptThrottleRate[bd];
 			switch (adapter->itr) {
 			case 0:
-				ndev_info(netdev, "%s turned off\n",
-					opt.name);
+				e_info("%s turned off\n", opt.name);
 				break;
 			case 1:
-				ndev_info(netdev,
-					  "%s set to dynamic mode\n",
-					  opt.name);
+				e_info("%s set to dynamic mode\n", opt.name);
 				adapter->itr_setting = adapter->itr;
 				adapter->itr = 20000;
 				break;
 			case 3:
-				ndev_info(netdev,
-					"%s set to dynamic conservative mode\n",
+				e_info("%s set to dynamic conservative mode\n",
 					opt.name);
 				adapter->itr_setting = adapter->itr;
 				adapter->itr = 20000;
 				break;
 			default:
-				e1000_validate_option(&adapter->itr, &opt,
-					adapter);
 				/*
-				 * save the setting, because the dynamic bits
-				 * change itr. clear the lower two bits
-				 * because they are used as control
+				 * Save the setting, because the dynamic bits
+				 * change itr.
 				 */
-				adapter->itr_setting = adapter->itr & ~3;
+				if (e1000_validate_option(&adapter->itr, &opt,
+							  adapter) &&
+				    (adapter->itr == 3)) {
+					/*
+					 * In case of invalid user value,
+					 * default to conservative mode.
+					 */
+					adapter->itr_setting = adapter->itr;
+					adapter->itr = 20000;
+				} else {
+					/*
+					 * Clear the lower two bits because
+					 * they are used as control.
+					 */
+					adapter->itr_setting =
+						adapter->itr & ~3;
+				}
 				break;
 			}
 		} else {
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 56f50491a45..1f11350e16c 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1283,14 +1283,6 @@ set_multicast_list(struct net_device *dev)
 
 	if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || dev->mc_count > 63)
 	{
-		/*
-		 *	We must make the kernel realise we had to move
-		 *	into promisc mode or we start all out war on
-		 *	the cable. If it was a promisc request the
-		 *	flag is already set. If not we assert it.
-		 */
-		dev->flags|=IFF_PROMISC;
-
 		eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
 		mode = inb(ioaddr + REG2);
 		outb(mode | PRMSC_Mode, ioaddr + REG2);
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 0920b796bd7..b70c5314f53 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -2937,9 +2937,9 @@ static void ehea_rereg_mrs(struct work_struct *work)
 				}
 			}
 		}
-       mutex_unlock(&dlpar_mem_lock);
-       ehea_info("re-initializing driver complete");
+	ehea_info("re-initializing driver complete");
 out:
+	mutex_unlock(&dlpar_mem_lock);
 	return;
 }
 
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index c05cb159c77..aa0bf6e1c69 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -1547,8 +1547,10 @@ static int __devinit enc28j60_probe(struct spi_device *spi)
 	random_ether_addr(dev->dev_addr);
 	enc28j60_set_hw_macaddr(dev);
 
-	ret = request_irq(spi->irq, enc28j60_irq, IRQF_TRIGGER_FALLING,
-			  DRV_NAME, priv);
+	/* Board setup must set the relevant edge trigger type;
+	 * level triggers won't currently work.
+	 */
+	ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
 	if (ret < 0) {
 		if (netif_msg_probe(priv))
 			dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c
index e3dd8b13690..bee8b3fbc56 100644
--- a/drivers/net/eth16i.c
+++ b/drivers/net/eth16i.c
@@ -1356,7 +1356,6 @@ static void eth16i_multicast(struct net_device *dev)
 
 	if(dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
 	{
-		dev->flags|=IFF_PROMISC;	/* Must do this */
 		outb(3, ioaddr + RECEIVE_MODE_REG);
 	} else {
 		outb(2, ioaddr + RECEIVE_MODE_REG);
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 4ed89fa9ae4..eeb55ed2152 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -77,26 +77,27 @@
  * Hardware access:
  */
 
-#define DEV_NEED_TIMERIRQ          0x00001  /* set the timer irq flag in the irq mask */
-#define DEV_NEED_LINKTIMER         0x00002  /* poll link settings. Relies on the timer irq */
-#define DEV_HAS_LARGEDESC          0x00004  /* device supports jumbo frames and needs packet format 2 */
-#define DEV_HAS_HIGH_DMA           0x00008  /* device supports 64bit dma */
-#define DEV_HAS_CHECKSUM           0x00010  /* device supports tx and rx checksum offloads */
-#define DEV_HAS_VLAN               0x00020  /* device supports vlan tagging and striping */
-#define DEV_HAS_MSI                0x00040  /* device supports MSI */
-#define DEV_HAS_MSI_X              0x00080  /* device supports MSI-X */
-#define DEV_HAS_POWER_CNTRL        0x00100  /* device supports power savings */
-#define DEV_HAS_STATISTICS_V1      0x00200  /* device supports hw statistics version 1 */
-#define DEV_HAS_STATISTICS_V2      0x00400  /* device supports hw statistics version 2 */
-#define DEV_HAS_TEST_EXTENDED      0x00800  /* device supports extended diagnostic test */
-#define DEV_HAS_MGMT_UNIT          0x01000  /* device supports management unit */
-#define DEV_HAS_CORRECT_MACADDR    0x02000  /* device supports correct mac address order */
-#define DEV_HAS_COLLISION_FIX      0x04000  /* device supports tx collision fix */
-#define DEV_HAS_PAUSEFRAME_TX_V1   0x08000  /* device supports tx pause frames version 1 */
-#define DEV_HAS_PAUSEFRAME_TX_V2   0x10000  /* device supports tx pause frames version 2 */
-#define DEV_HAS_PAUSEFRAME_TX_V3   0x20000  /* device supports tx pause frames version 3 */
-#define DEV_NEED_TX_LIMIT          0x40000  /* device needs to limit tx */
-#define DEV_HAS_GEAR_MODE          0x80000  /* device supports gear mode */
+#define DEV_NEED_TIMERIRQ          0x000001  /* set the timer irq flag in the irq mask */
+#define DEV_NEED_LINKTIMER         0x000002  /* poll link settings. Relies on the timer irq */
+#define DEV_HAS_LARGEDESC          0x000004  /* device supports jumbo frames and needs packet format 2 */
+#define DEV_HAS_HIGH_DMA           0x000008  /* device supports 64bit dma */
+#define DEV_HAS_CHECKSUM           0x000010  /* device supports tx and rx checksum offloads */
+#define DEV_HAS_VLAN               0x000020  /* device supports vlan tagging and striping */
+#define DEV_HAS_MSI                0x000040  /* device supports MSI */
+#define DEV_HAS_MSI_X              0x000080  /* device supports MSI-X */
+#define DEV_HAS_POWER_CNTRL        0x000100  /* device supports power savings */
+#define DEV_HAS_STATISTICS_V1      0x000200  /* device supports hw statistics version 1 */
+#define DEV_HAS_STATISTICS_V2      0x000400  /* device supports hw statistics version 2 */
+#define DEV_HAS_STATISTICS_V3      0x000800  /* device supports hw statistics version 3 */
+#define DEV_HAS_TEST_EXTENDED      0x001000  /* device supports extended diagnostic test */
+#define DEV_HAS_MGMT_UNIT          0x002000  /* device supports management unit */
+#define DEV_HAS_CORRECT_MACADDR    0x004000  /* device supports correct mac address order */
+#define DEV_HAS_COLLISION_FIX      0x008000  /* device supports tx collision fix */
+#define DEV_HAS_PAUSEFRAME_TX_V1   0x010000  /* device supports tx pause frames version 1 */
+#define DEV_HAS_PAUSEFRAME_TX_V2   0x020000  /* device supports tx pause frames version 2 */
+#define DEV_HAS_PAUSEFRAME_TX_V3   0x040000  /* device supports tx pause frames version 3 */
+#define DEV_NEED_TX_LIMIT          0x080000  /* device needs to limit tx */
+#define DEV_HAS_GEAR_MODE          0x100000  /* device supports gear mode */
 
 enum {
 	NvRegIrqStatus = 0x000,
@@ -248,6 +249,8 @@ enum {
 #define NVREG_TX_PAUSEFRAME_ENABLE_V1	0x01800010
 #define NVREG_TX_PAUSEFRAME_ENABLE_V2	0x056003f0
 #define NVREG_TX_PAUSEFRAME_ENABLE_V3	0x09f00880
+	NvRegTxPauseFrameLimit = 0x174,
+#define NVREG_TX_PAUSEFRAMELIMIT_ENABLE	0x00010000
 	NvRegMIIStatus = 0x180,
 #define NVREG_MIISTAT_ERROR		0x0001
 #define NVREG_MIISTAT_LINKCHANGE	0x0008
@@ -270,6 +273,9 @@ enum {
 #define NVREG_MIICTL_WRITE	0x00400
 #define NVREG_MIICTL_ADDRSHIFT	5
 	NvRegMIIData = 0x194,
+	NvRegTxUnicast = 0x1a0,
+	NvRegTxMulticast = 0x1a4,
+	NvRegTxBroadcast = 0x1a8,
 	NvRegWakeUpFlags = 0x200,
 #define NVREG_WAKEUPFLAGS_VAL		0x7770
 #define NVREG_WAKEUPFLAGS_BUSYSHIFT	24
@@ -333,6 +339,7 @@ enum {
 	NvRegPowerState2 = 0x600,
 #define NVREG_POWERSTATE2_POWERUP_MASK		0x0F11
 #define NVREG_POWERSTATE2_POWERUP_REV_A3	0x0001
+#define NVREG_POWERSTATE2_PHY_RESET		0x0004
 };
 
 /* Big endian: should work, but is untested */
@@ -401,6 +408,7 @@ union ring_type {
 #define NV_RX_FRAMINGERR	(1<<29)
 #define NV_RX_ERROR		(1<<30)
 #define NV_RX_AVAIL		(1<<31)
+#define NV_RX_ERROR_MASK	(NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3|NV_RX_ERROR4|NV_RX_CRCERR|NV_RX_OVERFLOW|NV_RX_FRAMINGERR)
 
 #define NV_RX2_CHECKSUMMASK	(0x1C000000)
 #define NV_RX2_CHECKSUM_IP	(0x10000000)
@@ -418,6 +426,7 @@ union ring_type {
 /* error and avail are the same for both */
 #define NV_RX2_ERROR		(1<<30)
 #define NV_RX2_AVAIL		(1<<31)
+#define NV_RX2_ERROR_MASK	(NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3|NV_RX2_ERROR4|NV_RX2_CRCERR|NV_RX2_OVERFLOW|NV_RX2_FRAMINGERR)
 
 #define NV_RX3_VLAN_TAG_PRESENT (1<<16)
 #define NV_RX3_VLAN_TAG_MASK	(0x0000FFFF)
@@ -529,6 +538,7 @@ union ring_type {
 #define PHY_REALTEK_INIT_REG4	0x14
 #define PHY_REALTEK_INIT_REG5	0x18
 #define PHY_REALTEK_INIT_REG6	0x11
+#define PHY_REALTEK_INIT_REG7	0x01
 #define PHY_REALTEK_INIT1	0x0000
 #define PHY_REALTEK_INIT2	0x8e00
 #define PHY_REALTEK_INIT3	0x0001
@@ -537,6 +547,9 @@ union ring_type {
 #define PHY_REALTEK_INIT6	0xf5c7
 #define PHY_REALTEK_INIT7	0x1000
 #define PHY_REALTEK_INIT8	0x0003
+#define PHY_REALTEK_INIT9	0x0008
+#define PHY_REALTEK_INIT10	0x0005
+#define PHY_REALTEK_INIT11	0x0200
 #define PHY_REALTEK_INIT_MSK1	0x0003
 
 #define PHY_GIGABIT	0x0100
@@ -611,7 +624,12 @@ static const struct nv_ethtool_str nv_estats_str[] = {
 	{ "rx_bytes" },
 	{ "tx_pause" },
 	{ "rx_pause" },
-	{ "rx_drop_frame" }
+	{ "rx_drop_frame" },
+
+	/* version 3 stats */
+	{ "tx_unicast" },
+	{ "tx_multicast" },
+	{ "tx_broadcast" }
 };
 
 struct nv_ethtool_stats {
@@ -647,9 +665,15 @@ struct nv_ethtool_stats {
 	u64 tx_pause;
 	u64 rx_pause;
 	u64 rx_drop_frame;
+
+	/* version 3 stats */
+	u64 tx_unicast;
+	u64 tx_multicast;
+	u64 tx_broadcast;
 };
 
-#define NV_DEV_STATISTICS_V2_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64))
+#define NV_DEV_STATISTICS_V3_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64))
+#define NV_DEV_STATISTICS_V2_COUNT (NV_DEV_STATISTICS_V3_COUNT - 3)
 #define NV_DEV_STATISTICS_V1_COUNT (NV_DEV_STATISTICS_V2_COUNT - 6)
 
 /* diagnostics */
@@ -1149,6 +1173,42 @@ static int phy_init(struct net_device *dev)
 				return PHY_ERROR;
 			}
 		}
+		if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
+		    np->phy_rev == PHY_REV_REALTEK_8211C) {
+			u32 powerstate = readl(base + NvRegPowerState2);
+
+			/* need to perform hw phy reset */
+			powerstate |= NVREG_POWERSTATE2_PHY_RESET;
+			writel(powerstate, base + NvRegPowerState2);
+			msleep(25);
+
+			powerstate &= ~NVREG_POWERSTATE2_PHY_RESET;
+			writel(powerstate, base + NvRegPowerState2);
+			msleep(25);
+
+			reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
+			reg |= PHY_REALTEK_INIT9;
+			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, reg)) {
+				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+				return PHY_ERROR;
+			}
+			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10)) {
+				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+				return PHY_ERROR;
+			}
+			reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, MII_READ);
+			if (!(reg & PHY_REALTEK_INIT11)) {
+				reg |= PHY_REALTEK_INIT11;
+				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, reg)) {
+					printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+					return PHY_ERROR;
+				}
+			}
+			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+				return PHY_ERROR;
+			}
+		}
 		if (np->phy_model == PHY_MODEL_REALTEK_8201) {
 			if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
 			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
@@ -1201,12 +1261,23 @@ static int phy_init(struct net_device *dev)
 	mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
 	mii_control |= BMCR_ANENABLE;
 
-	/* reset the phy
-	 * (certain phys need bmcr to be setup with reset)
-	 */
-	if (phy_reset(dev, mii_control)) {
-		printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev));
-		return PHY_ERROR;
+	if (np->phy_oui == PHY_OUI_REALTEK &&
+	    np->phy_model == PHY_MODEL_REALTEK_8211 &&
+	    np->phy_rev == PHY_REV_REALTEK_8211C) {
+		/* start autoneg since we already performed hw reset above */
+		mii_control |= BMCR_ANRESTART;
+		if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
+			printk(KERN_INFO "%s: phy init failed\n", pci_name(np->pci_dev));
+			return PHY_ERROR;
+		}
+	} else {
+		/* reset the phy
+		 * (certain phys need bmcr to be setup with reset)
+		 */
+		if (phy_reset(dev, mii_control)) {
+			printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev));
+			return PHY_ERROR;
+		}
 	}
 
 	/* phy vendor specific configuration */
@@ -1576,6 +1647,12 @@ static void nv_get_hw_stats(struct net_device *dev)
 		np->estats.rx_pause += readl(base + NvRegRxPause);
 		np->estats.rx_drop_frame += readl(base + NvRegRxDropFrame);
 	}
+
+	if (np->driver_data & DEV_HAS_STATISTICS_V3) {
+		np->estats.tx_unicast += readl(base + NvRegTxUnicast);
+		np->estats.tx_multicast += readl(base + NvRegTxMulticast);
+		np->estats.tx_broadcast += readl(base + NvRegTxBroadcast);
+	}
 }
 
 /*
@@ -1589,7 +1666,7 @@ static struct net_device_stats *nv_get_stats(struct net_device *dev)
 	struct fe_priv *np = netdev_priv(dev);
 
 	/* If the nic supports hw counters then retrieve latest values */
-	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2)) {
+	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) {
 		nv_get_hw_stats(dev);
 
 		/* copy to net_device stats */
@@ -2580,7 +2657,7 @@ static int nv_rx_process(struct net_device *dev, int limit)
 			if (likely(flags & NV_RX_DESCRIPTORVALID)) {
 				len = flags & LEN_MASK_V1;
 				if (unlikely(flags & NV_RX_ERROR)) {
-					if (flags & NV_RX_ERROR4) {
+					if ((flags & NV_RX_ERROR_MASK) == NV_RX_ERROR4) {
 						len = nv_getlen(dev, skb->data, len);
 						if (len < 0) {
 							dev->stats.rx_errors++;
@@ -2589,7 +2666,7 @@ static int nv_rx_process(struct net_device *dev, int limit)
 						}
 					}
 					/* framing errors are soft errors */
-					else if (flags & NV_RX_FRAMINGERR) {
+					else if ((flags & NV_RX_ERROR_MASK) == NV_RX_FRAMINGERR) {
 						if (flags & NV_RX_SUBSTRACT1) {
 							len--;
 						}
@@ -2615,7 +2692,7 @@ static int nv_rx_process(struct net_device *dev, int limit)
 			if (likely(flags & NV_RX2_DESCRIPTORVALID)) {
 				len = flags & LEN_MASK_V2;
 				if (unlikely(flags & NV_RX2_ERROR)) {
-					if (flags & NV_RX2_ERROR4) {
+					if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) {
 						len = nv_getlen(dev, skb->data, len);
 						if (len < 0) {
 							dev->stats.rx_errors++;
@@ -2624,7 +2701,7 @@ static int nv_rx_process(struct net_device *dev, int limit)
 						}
 					}
 					/* framing errors are soft errors */
-					else if (flags & NV_RX2_FRAMINGERR) {
+					else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) {
 						if (flags & NV_RX2_SUBSTRACT1) {
 							len--;
 						}
@@ -2714,7 +2791,7 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
 		if (likely(flags & NV_RX2_DESCRIPTORVALID)) {
 			len = flags & LEN_MASK_V2;
 			if (unlikely(flags & NV_RX2_ERROR)) {
-				if (flags & NV_RX2_ERROR4) {
+				if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) {
 					len = nv_getlen(dev, skb->data, len);
 					if (len < 0) {
 						dev_kfree_skb(skb);
@@ -2722,7 +2799,7 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
 					}
 				}
 				/* framing errors are soft errors */
-				else if (flags & NV_RX2_FRAMINGERR) {
+				else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) {
 					if (flags & NV_RX2_SUBSTRACT1) {
 						len--;
 					}
@@ -3001,8 +3078,11 @@ static void nv_update_pause(struct net_device *dev, u32 pause_flags)
 			u32 pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V1;
 			if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V2)
 				pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V2;
-			if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V3)
+			if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V3) {
 				pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V3;
+				/* limit the number of tx pause frames to a default of 8 */
+				writel(readl(base + NvRegTxPauseFrameLimit)|NVREG_TX_PAUSEFRAMELIMIT_ENABLE, base + NvRegTxPauseFrameLimit);
+			}
 			writel(pause_enable,  base + NvRegTxPauseFrame);
 			writel(regmisc|NVREG_MISC1_PAUSE_TX, base + NvRegMisc1);
 			np->pause_flags |= NV_PAUSEFRAME_TX_ENABLE;
@@ -4688,6 +4768,8 @@ static int nv_get_sset_count(struct net_device *dev, int sset)
 			return NV_DEV_STATISTICS_V1_COUNT;
 		else if (np->driver_data & DEV_HAS_STATISTICS_V2)
 			return NV_DEV_STATISTICS_V2_COUNT;
+		else if (np->driver_data & DEV_HAS_STATISTICS_V3)
+			return NV_DEV_STATISTICS_V3_COUNT;
 		else
 			return 0;
 	default:
@@ -5272,7 +5354,7 @@ static int nv_open(struct net_device *dev)
 		mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
 
 	/* start statistics timer */
-	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2))
+	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3))
 		mod_timer(&np->stats_poll,
 			round_jiffies(jiffies + STATS_INTERVAL));
 
@@ -5376,7 +5458,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	if (err < 0)
 		goto out_disable;
 
-	if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2))
+	if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3))
 		np->register_size = NV_PCI_REGSZ_VER3;
 	else if (id->driver_data & DEV_HAS_STATISTICS_V1)
 		np->register_size = NV_PCI_REGSZ_VER2;
@@ -5440,7 +5522,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	if (id->driver_data & DEV_HAS_CHECKSUM) {
 		np->rx_csum = 1;
 		np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
-		dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
+		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 		dev->features |= NETIF_F_TSO;
 	}
 
@@ -5561,6 +5643,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		dev->dev_addr[4] = (np->orig_mac[0] >>  8) & 0xff;
 		dev->dev_addr[5] = (np->orig_mac[0] >>  0) & 0xff;
 		writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
+		printk(KERN_DEBUG "nv_probe: set workaround bit for reversed mac addr\n");
 	}
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
@@ -5753,7 +5836,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 
 	dev_printk(KERN_INFO, &pci_dev->dev, "%s%s%s%s%s%s%s%s%s%sdesc-v%u\n",
 		   dev->features & NETIF_F_HIGHDMA ? "highdma " : "",
-		   dev->features & (NETIF_F_HW_CSUM | NETIF_F_SG) ?
+		   dev->features & (NETIF_F_IP_CSUM | NETIF_F_SG) ?
 		   	"csum " : "",
 		   dev->features & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX) ?
 		   	"vlan " : "",
@@ -5808,14 +5891,12 @@ static void nv_restore_phy(struct net_device *dev)
 	}
 }
 
-static void __devexit nv_remove(struct pci_dev *pci_dev)
+static void nv_restore_mac_addr(struct pci_dev *pci_dev)
 {
 	struct net_device *dev = pci_get_drvdata(pci_dev);
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base = get_hwbase(dev);
 
-	unregister_netdev(dev);
-
 	/* special op: write back the misordered MAC address - otherwise
 	 * the next nv_probe would see a wrong address.
 	 */
@@ -5823,6 +5904,15 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
 	writel(np->orig_mac[1], base + NvRegMacAddrB);
 	writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV,
 	       base + NvRegTransmitPoll);
+}
+
+static void __devexit nv_remove(struct pci_dev *pci_dev)
+{
+	struct net_device *dev = pci_get_drvdata(pci_dev);
+
+	unregister_netdev(dev);
+
+	nv_restore_mac_addr(pci_dev);
 
 	/* restore any phy related changes */
 	nv_restore_phy(dev);
@@ -5893,10 +5983,14 @@ static void nv_shutdown(struct pci_dev *pdev)
 	if (netif_running(dev))
 		nv_close(dev);
 
-	pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
-	pci_enable_wake(pdev, PCI_D3cold, np->wolenabled);
+	nv_restore_mac_addr(pdev);
+
 	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
+	if (system_state == SYSTEM_POWER_OFF) {
+		if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
+			pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
 }
 #else
 #define nv_suspend NULL
@@ -6031,35 +6125,35 @@ static struct pci_device_id pci_tbl[] = {
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{0,},
 };
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 9a51ec8293c..9d461825bf4 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -792,6 +792,10 @@ static int fs_enet_open(struct net_device *dev)
 	int r;
 	int err;
 
+	/* to initialize the fep->cur_rx,... */
+	/* not doing this, will cause a crash in fs_enet_rx_napi */
+	fs_init_bds(fep->ndev);
+
 	if (fep->fpi->use_napi)
 		napi_enable(&fep->napi);
 
@@ -1167,6 +1171,10 @@ static struct of_device_id fs_enet_match[] = {
 		.compatible = "fsl,cpm1-scc-enet",
 		.data = (void *)&fs_scc_ops,
 	},
+	{
+		.compatible = "fsl,cpm2-scc-enet",
+		.data = (void *)&fs_scc_ops,
+	},
 #endif
 #ifdef CONFIG_FS_ENET_HAS_FCC
 	{
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index 0a97fc2d97e..1c7ef812a8e 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -126,7 +126,7 @@ out:
 #define FCC_NAPI_RX_EVENT_MSK	(FCC_ENET_RXF | FCC_ENET_RXB)
 #define FCC_RX_EVENT		(FCC_ENET_RXF)
 #define FCC_TX_EVENT		(FCC_ENET_TXB)
-#define FCC_ERR_EVENT_MSK	(FCC_ENET_TXE | FCC_ENET_BSY)
+#define FCC_ERR_EVENT_MSK	(FCC_ENET_TXE)
 
 static int setup_data(struct net_device *dev)
 {
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index 029b3c7ef29..22f50dd8b27 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -47,7 +47,6 @@
 #include "fs_enet.h"
 
 /*************************************************/
-
 #if defined(CONFIG_CPM1)
 /* for a 8xx __raw_xxx's are sufficient */
 #define __fs_out32(addr, x)	__raw_writel(x, addr)
@@ -62,6 +61,8 @@
 #define __fs_out16(addr, x)	out_be16(addr, x)
 #define __fs_in32(addr)	in_be32(addr)
 #define __fs_in16(addr)	in_be16(addr)
+#define __fs_out8(addr, x)	out_8(addr, x)
+#define __fs_in8(addr)	in_8(addr)
 #endif
 
 /* write, read, set bits, clear bits */
@@ -262,8 +263,13 @@ static void restart(struct net_device *dev)
 
 	/* Initialize function code registers for big-endian.
 	 */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	W8(ep, sen_genscc.scc_rfcr, SCC_EB | SCC_GBL);
+	W8(ep, sen_genscc.scc_tfcr, SCC_EB | SCC_GBL);
+#else
 	W8(ep, sen_genscc.scc_rfcr, SCC_EB);
 	W8(ep, sen_genscc.scc_tfcr, SCC_EB);
+#endif
 
 	/* Set maximum bytes per receive buffer.
 	 * This appears to be an Ethernet frame size, not the buffer
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index b8394cf134e..4320a983a58 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -105,6 +105,7 @@ const char gfar_driver_version[] = "1.3";
 
 static int gfar_enet_open(struct net_device *dev);
 static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void gfar_reset_task(struct work_struct *work);
 static void gfar_timeout(struct net_device *dev);
 static int gfar_close(struct net_device *dev);
 struct sk_buff *gfar_new_skb(struct net_device *dev);
@@ -134,9 +135,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int l
 static void gfar_vlan_rx_register(struct net_device *netdev,
 		                struct vlan_group *grp);
 void gfar_halt(struct net_device *dev);
-#ifdef CONFIG_PM
 static void gfar_halt_nodisable(struct net_device *dev);
-#endif
 void gfar_start(struct net_device *dev);
 static void gfar_clear_exact_match(struct net_device *dev);
 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
@@ -211,6 +210,7 @@ static int gfar_probe(struct platform_device *pdev)
 	spin_lock_init(&priv->txlock);
 	spin_lock_init(&priv->rxlock);
 	spin_lock_init(&priv->bflock);
+	INIT_WORK(&priv->reset_task, gfar_reset_task);
 
 	platform_set_drvdata(pdev, dev);
 
@@ -414,9 +414,7 @@ static int gfar_suspend(struct platform_device *pdev, pm_message_t state)
 		spin_unlock(&priv->rxlock);
 		spin_unlock_irqrestore(&priv->txlock, flags);
 
-#ifdef CONFIG_GFAR_NAPI
 		napi_disable(&priv->napi);
-#endif
 
 		if (magic_packet) {
 			/* Enable interrupt on Magic Packet */
@@ -469,9 +467,7 @@ static int gfar_resume(struct platform_device *pdev)
 
 	netif_device_attach(dev);
 
-#ifdef CONFIG_GFAR_NAPI
 	napi_enable(&priv->napi);
-#endif
 
 	return 0;
 }
@@ -635,7 +631,6 @@ static void init_registers(struct net_device *dev)
 }
 
 
-#ifdef CONFIG_PM
 /* Halt the receive and transmit queues */
 static void gfar_halt_nodisable(struct net_device *dev)
 {
@@ -661,7 +656,6 @@ static void gfar_halt_nodisable(struct net_device *dev)
 			cpu_relax();
 	}
 }
-#endif
 
 /* Halt the receive and transmit queues */
 void gfar_halt(struct net_device *dev)
@@ -670,6 +664,8 @@ void gfar_halt(struct net_device *dev)
 	struct gfar __iomem *regs = priv->regs;
 	u32 tempval;
 
+	gfar_halt_nodisable(dev);
+
 	/* Disable Rx and Tx */
 	tempval = gfar_read(&regs->maccfg1);
 	tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
@@ -1218,6 +1214,7 @@ static int gfar_close(struct net_device *dev)
 
 	napi_disable(&priv->napi);
 
+	cancel_work_sync(&priv->reset_task);
 	stop_gfar(dev);
 
 	/* Disconnect from the PHY */
@@ -1332,13 +1329,16 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
 	return 0;
 }
 
-/* gfar_timeout gets called when a packet has not been
+/* gfar_reset_task gets scheduled when a packet has not been
  * transmitted after a set amount of time.
  * For now, assume that clearing out all the structures, and
- * starting over will fix the problem. */
-static void gfar_timeout(struct net_device *dev)
+ * starting over will fix the problem.
+ */
+static void gfar_reset_task(struct work_struct *work)
 {
-	dev->stats.tx_errors++;
+	struct gfar_private *priv = container_of(work, struct gfar_private,
+			reset_task);
+	struct net_device *dev = priv->dev;
 
 	if (dev->flags & IFF_UP) {
 		stop_gfar(dev);
@@ -1348,6 +1348,14 @@ static void gfar_timeout(struct net_device *dev)
 	netif_tx_schedule_all(dev);
 }
 
+static void gfar_timeout(struct net_device *dev)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+
+	dev->stats.tx_errors++;
+	schedule_work(&priv->reset_task);
+}
+
 /* Interrupt Handler for Transmit complete */
 static int gfar_clean_tx_ring(struct net_device *dev)
 {
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index d59df98bd63..f46e9b63af1 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -756,6 +756,7 @@ struct gfar_private {
 
 	uint32_t msg_enable;
 
+	struct work_struct reset_task;
 	/* Network Statistics */
 	struct gfar_extra_stats extra_stats;
 };
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c
index 5116f68e01b..782c2017008 100644
--- a/drivers/net/gianfar_sysfs.c
+++ b/drivers/net/gianfar_sysfs.c
@@ -33,7 +33,6 @@
 
 #include <asm/uaccess.h>
 #include <linux/module.h>
-#include <linux/version.h>
 
 #include "gianfar.h"
 
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 3249df5e0f1..b8e25c4624d 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -548,7 +548,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
 		}
 
 		printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name,
-		       (ax->tty->ops->chars_in_buffer(ax->tty) || ax->xleft) ?
+		       (tty_chars_in_buffer(ax->tty) || ax->xleft) ?
 		       "bad line quality" : "driver error");
 
 		ax->xleft = 0;
diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c
index 8239939554b..fbbd3e660c2 100644
--- a/drivers/net/hp-plus.c
+++ b/drivers/net/hp-plus.c
@@ -139,7 +139,7 @@ static int __init do_hpp_probe(struct net_device *dev)
 #ifndef MODULE
 struct net_device * __init hp_plus_probe(int unit)
 {
-	struct net_device *dev = alloc_ei_netdev();
+	struct net_device *dev = alloc_eip_netdev();
 	int err;
 
 	if (!dev)
@@ -284,7 +284,7 @@ hpp_open(struct net_device *dev)
 	int option_reg;
 	int retval;
 
-	if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) {
+	if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
 	    return retval;
 	}
 
@@ -302,7 +302,7 @@ hpp_open(struct net_device *dev)
 	/* Select the operational page. */
 	outw(Perf_Page, ioaddr + HP_PAGING);
 
-	ei_open(dev);
+	eip_open(dev);
 	return 0;
 }
 
@@ -313,7 +313,7 @@ hpp_close(struct net_device *dev)
 	int option_reg = inw(ioaddr + HPP_OPTION);
 
 	free_irq(dev->irq, dev);
-	ei_close(dev);
+	eip_close(dev);
 	outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
 		 ioaddr + HPP_OPTION);
 
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 2e720f26ca8..ccd9d9058f6 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -663,9 +663,6 @@ static int emac_configure(struct emac_instance *dev)
 	if (emac_phy_gpcs(dev->phy.mode))
 		emac_mii_reset_phy(&dev->phy);
 
-	/* Required for Pause packet support in EMAC */
-	dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1);
-
 	return 0;
 }
 
@@ -1150,6 +1147,9 @@ static int emac_open(struct net_device *ndev)
 	} else
 		netif_carrier_on(dev->ndev);
 
+	/* Required for Pause packet support in EMAC */
+	dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1);
+
 	emac_configure(dev);
 	mal_poll_add(dev->mal, &dev->commac);
 	mal_enable_tx_channel(dev->mal, dev->mal_tx_chan);
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index a03fe1fb61c..c2d57f83608 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -904,8 +904,6 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	unsigned long data_dma_addr;
 
 	desc.fields.flags_len = IBMVETH_BUF_VALID | skb->len;
-	data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
-				       skb->len, DMA_TO_DEVICE);
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL &&
 	    ip_hdr(skb)->protocol != IPPROTO_TCP && skb_checksum_help(skb)) {
@@ -924,6 +922,8 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		buf[1] = 0;
 	}
 
+	data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
+				       skb->len, DMA_TO_DEVICE);
 	if (dma_mapping_error(&adapter->vdev->dev, data_dma_addr)) {
 		if (!firmware_has_feature(FW_FEATURE_CMO))
 			ibmveth_error_printk("tx: unable to map xmit buffer\n");
@@ -932,6 +932,7 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		desc.fields.address = adapter->bounce_buffer_dma;
 		tx_map_failed++;
 		used_bounce = 1;
+		wmb();
 	} else
 		desc.fields.address = data_dma_addr;
 
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 0960e69b2da..e4fbefc8c82 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -69,18 +69,20 @@ static void ri_tasklet(unsigned long dev)
 	struct net_device *_dev = (struct net_device *)dev;
 	struct ifb_private *dp = netdev_priv(_dev);
 	struct net_device_stats *stats = &_dev->stats;
+	struct netdev_queue *txq;
 	struct sk_buff *skb;
 
+	txq = netdev_get_tx_queue(_dev, 0);
 	dp->st_task_enter++;
 	if ((skb = skb_peek(&dp->tq)) == NULL) {
 		dp->st_txq_refl_try++;
-		if (netif_tx_trylock(_dev)) {
+		if (__netif_tx_trylock(txq)) {
 			dp->st_rxq_enter++;
 			while ((skb = skb_dequeue(&dp->rq)) != NULL) {
 				skb_queue_tail(&dp->tq, skb);
 				dp->st_rx2tx_tran++;
 			}
-			netif_tx_unlock(_dev);
+			__netif_tx_unlock(txq);
 		} else {
 			/* reschedule */
 			dp->st_rxq_notenter++;
@@ -115,7 +117,7 @@ static void ri_tasklet(unsigned long dev)
 			BUG();
 	}
 
-	if (netif_tx_trylock(_dev)) {
+	if (__netif_tx_trylock(txq)) {
 		dp->st_rxq_check++;
 		if ((skb = skb_peek(&dp->rq)) == NULL) {
 			dp->tasklet_pending = 0;
@@ -123,10 +125,10 @@ static void ri_tasklet(unsigned long dev)
 				netif_wake_queue(_dev);
 		} else {
 			dp->st_rxq_rsch++;
-			netif_tx_unlock(_dev);
+			__netif_tx_unlock(txq);
 			goto resched;
 		}
-		netif_tx_unlock(_dev);
+		__netif_tx_unlock(txq);
 	} else {
 resched:
 		dp->tasklet_pending = 1;
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index e098f234770..f5e2e7235fc 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -87,7 +87,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 	case E1000_DEV_ID_82576:
 	case E1000_DEV_ID_82576_FIBER:
 	case E1000_DEV_ID_82576_SERDES:
-	case E1000_DEV_ID_82576_QUAD_COPPER:
 		mac->type = e1000_82576;
 		break;
 	default:
@@ -850,7 +849,7 @@ void igb_update_mc_addr_list_82575(struct e1000_hw *hw,
 	for (; mc_addr_count > 0; mc_addr_count--) {
 		hash_value = igb_hash_mc_addr(hw, mc_addr_list);
 		hw_dbg("Hash value = 0x%03X\n", hash_value);
-		hw->mac.ops.mta_set(hw, hash_value);
+		igb_mta_set(hw, hash_value);
 		mc_addr_list += ETH_ALEN;
 	}
 }
@@ -1136,6 +1135,12 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
 		       E1000_PCS_LCTL_FORCE_LINK;     /* Force Link */
 		hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);
 	}
+
+	if (hw->mac.type == e1000_82576) {
+		reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+		igb_force_mac_fc(hw);
+	}
+
 	wr32(E1000_PCS_LCTL, reg);
 
 	return 0;
@@ -1232,70 +1237,6 @@ out:
 }
 
 /**
- *  igb_translate_register_82576 - Translate the proper register offset
- *  @reg: e1000 register to be read
- *
- *  Registers in 82576 are located in different offsets than other adapters
- *  even though they function in the same manner.  This function takes in
- *  the name of the register to read and returns the correct offset for
- *  82576 silicon.
- **/
-u32 igb_translate_register_82576(u32 reg)
-{
-	/*
-	 * Some of the Kawela registers are located at different
-	 * offsets than they are in older adapters.
-	 * Despite the difference in location, the registers
-	 * function in the same manner.
-	 */
-	switch (reg) {
-	case E1000_TDBAL(0):
-		reg = 0x0E000;
-		break;
-	case E1000_TDBAH(0):
-		reg = 0x0E004;
-		break;
-	case E1000_TDLEN(0):
-		reg = 0x0E008;
-		break;
-	case E1000_TDH(0):
-		reg = 0x0E010;
-		break;
-	case E1000_TDT(0):
-		reg = 0x0E018;
-		break;
-	case E1000_TXDCTL(0):
-		reg = 0x0E028;
-		break;
-	case E1000_RDBAL(0):
-		reg = 0x0C000;
-		break;
-	case E1000_RDBAH(0):
-		reg = 0x0C004;
-		break;
-	case E1000_RDLEN(0):
-		reg = 0x0C008;
-		break;
-	case E1000_RDH(0):
-		reg = 0x0C010;
-		break;
-	case E1000_RDT(0):
-		reg = 0x0C018;
-		break;
-	case E1000_RXDCTL(0):
-		reg = 0x0C028;
-		break;
-	case E1000_SRRCTL(0):
-		reg = 0x0C00C;
-		break;
-	default:
-		break;
-	}
-
-	return reg;
-}
-
-/**
  *  igb_reset_init_script_82575 - Inits HW defaults after reset
  *  @hw: pointer to the HW structure
  *
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index 2f848e578a2..c1928b5efe1 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -28,7 +28,6 @@
 #ifndef _E1000_82575_H_
 #define _E1000_82575_H_
 
-u32 igb_translate_register_82576(u32 reg);
 void igb_update_mc_addr_list_82575(struct e1000_hw*, u8*, u32, u32, u32);
 extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw);
 extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index afdba3c9073..ce700689fb5 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -257,6 +257,7 @@
 #define E1000_PCS_LCTL_FDV_FULL          8
 #define E1000_PCS_LCTL_FSD               0x10
 #define E1000_PCS_LCTL_FORCE_LINK        0x20
+#define E1000_PCS_LCTL_FORCE_FCTRL       0x80
 #define E1000_PCS_LCTL_AN_ENABLE         0x10000
 #define E1000_PCS_LCTL_AN_RESTART        0x20000
 #define E1000_PCS_LCTL_AN_TIMEOUT        0x40000
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index 19fa4ee96f2..99504a600a8 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -41,7 +41,6 @@ struct e1000_hw;
 #define E1000_DEV_ID_82576                    0x10C9
 #define E1000_DEV_ID_82576_FIBER              0x10E6
 #define E1000_DEV_ID_82576_SERDES             0x10E7
-#define E1000_DEV_ID_82576_QUAD_COPPER        0x10E8
 #define E1000_DEV_ID_82575EB_COPPER           0x10A7
 #define E1000_DEV_ID_82575EB_FIBER_SERDES     0x10A9
 #define E1000_DEV_ID_82575GB_QUAD_COPPER      0x10D6
@@ -420,7 +419,6 @@ struct e1000_mac_operations {
 	void (*rar_set)(struct e1000_hw *, u8 *, u32);
 	s32  (*read_mac_addr)(struct e1000_hw *);
 	s32  (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
-	void (*mta_set)(struct e1000_hw *, u32);
 };
 
 struct e1000_phy_operations {
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index 20408aa1f91..e18747c70be 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -144,34 +144,6 @@ void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
 }
 
 /**
- *  igb_init_rx_addrs - Initialize receive address's
- *  @hw: pointer to the HW structure
- *  @rar_count: receive address registers
- *
- *  Setups the receive address registers by setting the base receive address
- *  register to the devices MAC address and clearing all the other receive
- *  address registers to 0.
- **/
-void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
-{
-	u32 i;
-
-	/* Setup the receive address */
-	hw_dbg("Programming MAC Address into RAR[0]\n");
-
-	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
-
-	/* Zero out the other (rar_entry_count - 1) receive addresses */
-	hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
-	for (i = 1; i < rar_count; i++) {
-		array_wr32(E1000_RA, (i << 1), 0);
-		wrfl();
-		array_wr32(E1000_RA, ((i << 1) + 1), 0);
-		wrfl();
-	}
-}
-
-/**
  *  igb_check_alt_mac_addr - Check for alternate MAC addr
  *  @hw: pointer to the HW structure
  *
@@ -271,7 +243,7 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
  *  current value is read, the new bit is OR'd in and the new value is
  *  written back into the register.
  **/
-static void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
 {
 	u32 hash_bit, hash_reg, mta;
 
@@ -297,60 +269,6 @@ static void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
 }
 
 /**
- *  igb_update_mc_addr_list - Update Multicast addresses
- *  @hw: pointer to the HW structure
- *  @mc_addr_list: array of multicast addresses to program
- *  @mc_addr_count: number of multicast addresses to program
- *  @rar_used_count: the first RAR register free to program
- *  @rar_count: total number of supported Receive Address Registers
- *
- *  Updates the Receive Address Registers and Multicast Table Array.
- *  The caller must have a packed mc_addr_list of multicast addresses.
- *  The parameter rar_count will usually be hw->mac.rar_entry_count
- *  unless there are workarounds that change this.
- **/
-void igb_update_mc_addr_list(struct e1000_hw *hw,
-			       u8 *mc_addr_list, u32 mc_addr_count,
-			       u32 rar_used_count, u32 rar_count)
-{
-	u32 hash_value;
-	u32 i;
-
-	/*
-	 * Load the first set of multicast addresses into the exact
-	 * filters (RAR).  If there are not enough to fill the RAR
-	 * array, clear the filters.
-	 */
-	for (i = rar_used_count; i < rar_count; i++) {
-		if (mc_addr_count) {
-			hw->mac.ops.rar_set(hw, mc_addr_list, i);
-			mc_addr_count--;
-			mc_addr_list += ETH_ALEN;
-		} else {
-			array_wr32(E1000_RA, i << 1, 0);
-			wrfl();
-			array_wr32(E1000_RA, (i << 1) + 1, 0);
-			wrfl();
-		}
-	}
-
-	/* Clear the old settings from the MTA */
-	hw_dbg("Clearing MTA\n");
-	for (i = 0; i < hw->mac.mta_reg_count; i++) {
-		array_wr32(E1000_MTA, i, 0);
-		wrfl();
-	}
-
-	/* Load any remaining multicast addresses into the hash table. */
-	for (; mc_addr_count > 0; mc_addr_count--) {
-		hash_value = igb_hash_mc_addr(hw, mc_addr_list);
-		hw_dbg("Hash value = 0x%03X\n", hash_value);
-		igb_mta_set(hw, hash_value);
-		mc_addr_list += ETH_ALEN;
-	}
-}
-
-/**
  *  igb_hash_mc_addr - Generate a multicast hash value
  *  @hw: pointer to the HW structure
  *  @mc_addr: pointer to a multicast address
diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h
index dc2f8cce15e..cbee6af7d91 100644
--- a/drivers/net/igb/e1000_mac.h
+++ b/drivers/net/igb/e1000_mac.h
@@ -51,9 +51,6 @@ s32  igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
 				       u16 *duplex);
 s32  igb_id_led_init(struct e1000_hw *hw);
 s32  igb_led_off(struct e1000_hw *hw);
-void igb_update_mc_addr_list(struct e1000_hw *hw,
-			       u8 *mc_addr_list, u32 mc_addr_count,
-			       u32 rar_used_count, u32 rar_count);
 s32  igb_setup_link(struct e1000_hw *hw);
 s32  igb_validate_mdi_setting(struct e1000_hw *hw);
 s32  igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
@@ -62,7 +59,7 @@ s32  igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
 void igb_clear_hw_cntrs_base(struct e1000_hw *hw);
 void igb_clear_vfta(struct e1000_hw *hw);
 void igb_config_collision_dist(struct e1000_hw *hw);
-void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
 void igb_put_hw_semaphore(struct e1000_hw *hw);
 void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
 s32  igb_check_alt_mac_addr(struct e1000_hw *hw);
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index b95093d24c0..95523af2605 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -262,9 +262,6 @@
 #define E1000_RETA(_i)  (0x05C00 + ((_i) * 4))
 #define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
 
-#define E1000_REGISTER(a, reg) (((a)->mac.type < e1000_82576) \
-                               ? reg : e1000_translate_register_82576(reg))
-
 #define wr32(reg, value) (writel(value, hw->hw_addr + reg))
 #define rd32(reg) (readl(hw->hw_addr + reg))
 #define wrfl() ((void)rd32(E1000_STATUS))
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 11aee130995..58906c984be 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -373,13 +373,17 @@ static void igb_get_regs(struct net_device *netdev,
 	regs_buff[12] = rd32(E1000_EECD);
 
 	/* Interrupt */
-	regs_buff[13] = rd32(E1000_EICR);
+	/* Reading EICS for EICR because they read the
+	 * same but EICS does not clear on read */
+	regs_buff[13] = rd32(E1000_EICS);
 	regs_buff[14] = rd32(E1000_EICS);
 	regs_buff[15] = rd32(E1000_EIMS);
 	regs_buff[16] = rd32(E1000_EIMC);
 	regs_buff[17] = rd32(E1000_EIAC);
 	regs_buff[18] = rd32(E1000_EIAM);
-	regs_buff[19] = rd32(E1000_ICR);
+	/* Reading ICS for ICR because they read the
+	 * same but ICS does not clear on read */
+	regs_buff[19] = rd32(E1000_ICS);
 	regs_buff[20] = rd32(E1000_ICS);
 	regs_buff[21] = rd32(E1000_IMS);
 	regs_buff[22] = rd32(E1000_IMC);
@@ -1746,15 +1750,6 @@ static int igb_wol_exclusion(struct igb_adapter *adapter,
 		/* return success for non excluded adapter ports */
 		retval = 0;
 		break;
-	case E1000_DEV_ID_82576_QUAD_COPPER:
-		/* quad port adapters only support WoL on port A */
-		if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
-			wol->supported = 0;
-			break;
-		}
-		/* return success for non excluded adapter ports */
-		retval = 0;
-		break;
 	default:
 		/* dual port cards only support WoL on port A from now on
 		 * unless it was enabled in the eeprom for port B
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index b602c4dd0d1..634c4c9d87b 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -61,7 +61,6 @@ static struct pci_device_id igb_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
@@ -311,7 +310,7 @@ static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue,
 		array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
 		break;
 	case e1000_82576:
-		/* Kawela uses a table-based method for assigning vectors.
+		/* The 82576 uses a table-based method for assigning vectors.
 		   Each queue has a single entry in the table to which we write
 		   a vector number along with a "valid" bit.  Sadly, the layout
 		   of the table is somewhat counterintuitive. */
@@ -521,7 +520,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter)
 			      adapter->msix_entries,
 			      numvecs);
 	if (err == 0)
-		return;
+		goto out;
 
 	igb_reset_interrupt_capability(adapter);
 
@@ -531,7 +530,7 @@ msi_only:
 	adapter->num_tx_queues = 1;
 	if (!pci_enable_msi(adapter->pdev))
 		adapter->flags |= IGB_FLAG_HAS_MSI;
-
+out:
 	/* Notify the stack of the (possibly) reduced Tx Queue count. */
 	adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
 	return;
@@ -720,28 +719,6 @@ static void igb_get_hw_control(struct igb_adapter *adapter)
 			ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
 }
 
-static void igb_init_manageability(struct igb_adapter *adapter)
-{
-	struct e1000_hw *hw = &adapter->hw;
-
-	if (adapter->en_mng_pt) {
-		u32 manc2h = rd32(E1000_MANC2H);
-		u32 manc = rd32(E1000_MANC);
-
-		/* enable receiving management packets to the host */
-		/* this will probably generate destination unreachable messages
-		 * from the host OS, but the packets will be handled on SMBUS */
-		manc |= E1000_MANC_EN_MNG2HOST;
-#define E1000_MNG2HOST_PORT_623 (1 << 5)
-#define E1000_MNG2HOST_PORT_664 (1 << 6)
-		manc2h |= E1000_MNG2HOST_PORT_623;
-		manc2h |= E1000_MNG2HOST_PORT_664;
-		wr32(E1000_MANC2H, manc2h);
-
-		wr32(E1000_MANC, manc);
-	}
-}
-
 /**
  * igb_configure - configure the hardware for RX and TX
  * @adapter: private board structure
@@ -755,7 +732,6 @@ static void igb_configure(struct igb_adapter *adapter)
 	igb_set_multi(netdev);
 
 	igb_restore_vlan(adapter);
-	igb_init_manageability(adapter);
 
 	igb_configure_tx(adapter);
 	igb_setup_rctl(adapter);
@@ -1240,16 +1216,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 		if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
 			adapter->eeprom_wol = 0;
 		break;
-	case E1000_DEV_ID_82576_QUAD_COPPER:
-		/* if quad port adapter, disable WoL on all but port A */
-		if (global_quad_port_a != 0)
-			adapter->eeprom_wol = 0;
-		else
-			adapter->flags |= IGB_FLAG_QUAD_PORT_A;
-		/* Reset for multiple quad port adapters */
-		if (++global_quad_port_a == 4)
-			global_quad_port_a = 0;
-		break;
 	}
 
 	/* initialize the wol settings based on the eeprom settings */
@@ -1372,7 +1338,8 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 
 	unregister_netdev(netdev);
 
-	if (!igb_check_reset_block(&adapter->hw))
+	if (adapter->hw.phy.ops.reset_phy &&
+	    !igb_check_reset_block(&adapter->hw))
 		adapter->hw.phy.ops.reset_phy(&adapter->hw);
 
 	igb_remove_device(&adapter->hw);
@@ -2312,7 +2279,9 @@ static void igb_watchdog_task(struct work_struct *work)
 	struct igb_ring *tx_ring = adapter->tx_ring;
 	struct e1000_mac_info *mac = &adapter->hw.mac;
 	u32 link;
+	u32 eics = 0;
 	s32 ret_val;
+	int i;
 
 	if ((netif_carrier_ok(netdev)) &&
 	    (rd32(E1000_STATUS) & E1000_STATUS_LU))
@@ -2414,7 +2383,13 @@ link_up:
 	}
 
 	/* Cause software interrupt to ensure rx ring is cleaned */
-	wr32(E1000_ICS, E1000_ICS_RXDMT0);
+	if (adapter->msix_entries) {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			eics |= adapter->rx_ring[i].eims_value;
+		wr32(E1000_EICS, eics);
+	} else {
+		wr32(E1000_ICS, E1000_ICS_RXDMT0);
+	}
 
 	/* Force detection of hung controller every watchdog period */
 	tx_ring->detect_tx_hung = true;
@@ -4523,8 +4498,6 @@ static void igb_io_resume(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct igb_adapter *adapter = netdev_priv(netdev);
 
-	igb_init_manageability(adapter);
-
 	if (netif_running(netdev)) {
 		if (igb_up(adapter)) {
 			dev_err(&pdev->dev, "igb_up failed after reset\n");
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index e0e718ab4c2..dd9318f1949 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -7,7 +7,6 @@
 #ifndef __LINUX_IPG_H
 #define __LINUX_IPG_H
 
-#include <linux/version.h>
 #include <linux/module.h>
 
 #include <linux/kernel.h>
@@ -21,7 +20,6 @@
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/skbuff.h>
-#include <linux/version.h>
 #include <asm/bitops.h>
 
 /*
diff --git a/drivers/net/irda/act200l-sir.c b/drivers/net/irda/act200l-sir.c
index d8b89c74aab..37ab8c85571 100644
--- a/drivers/net/irda/act200l-sir.c
+++ b/drivers/net/irda/act200l-sir.c
@@ -107,7 +107,7 @@ static int act200l_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s()\n", __func__ );
 
 	/* Power on the dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -124,7 +124,7 @@ static int act200l_open(struct sir_dev *dev)
 
 static int act200l_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s()\n", __func__ );
 
 	/* Power off the dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -143,7 +143,7 @@ static int act200l_change_speed(struct sir_dev *dev, unsigned speed)
 	u8 control[3];
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s()\n", __func__ );
 
 	/* Clear DTR and set RTS to enter command mode */
 	sirdev_set_dtr_rts(dev, FALSE, TRUE);
@@ -212,7 +212,7 @@ static int act200l_reset(struct sir_dev *dev)
 	};
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s()\n", __func__ );
 
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_RESET:
@@ -240,7 +240,7 @@ static int act200l_reset(struct sir_dev *dev)
 		dev->speed = 9600;
 		break;
 	default:
-		IRDA_ERROR("%s(), unknown state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s(), unknown state %d\n", __func__, state);
 		ret = -1;
 		break;
 	}
diff --git a/drivers/net/irda/actisys-sir.c b/drivers/net/irda/actisys-sir.c
index 736d2473b7e..50b2141a610 100644
--- a/drivers/net/irda/actisys-sir.c
+++ b/drivers/net/irda/actisys-sir.c
@@ -165,7 +165,7 @@ static int actisys_change_speed(struct sir_dev *dev, unsigned speed)
 	int ret = 0;
 	int i = 0;
 
-        IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__,
+        IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __func__,
         	speed, dev->speed);
 
 	/* dongle was already resetted from irda_request state machine,
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 083b0dd70fe..2ff181861d2 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -152,7 +152,7 @@ static int __init ali_ircc_init(void)
 	int reg, revision;
 	int i = 0;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 
 	ret = platform_driver_register(&ali_ircc_driver);
         if (ret) {
@@ -166,7 +166,7 @@ static int __init ali_ircc_init(void)
 	/* Probe for all the ALi chipsets we know about */
 	for (chip= chips; chip->name; chip++, i++) 
 	{
-		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, chip->name);
+		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name);
 				
 		/* Try all config registers for this chip */
 		for (cfg=0; cfg<2; cfg++)
@@ -196,11 +196,11 @@ static int __init ali_ircc_init(void)
 				
 			if (reg == chip->cid_value)
 			{
-				IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __FUNCTION__, cfg_base);
+				IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __func__, cfg_base);
 					   
 				outb(0x1F, cfg_base);
 				revision = inb(cfg_base+1);
-				IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __FUNCTION__,
+				IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __func__,
 					   chip->name, revision);					
 				
 				/* 
@@ -223,14 +223,14 @@ static int __init ali_ircc_init(void)
 			}
 			else
 			{
-				IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __FUNCTION__, chip->name, cfg_base);
+				IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __func__, chip->name, cfg_base);
 			}
 			/* Exit configuration */
 			outb(0xbb, cfg_base);
 		}
 	}		
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);					   		
+	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 
 	if (ret)
 		platform_driver_unregister(&ali_ircc_driver);
@@ -248,7 +248,7 @@ static void __exit ali_ircc_cleanup(void)
 {
 	int i;
 
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 
 	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 		if (dev_self[i])
@@ -257,7 +257,7 @@ static void __exit ali_ircc_cleanup(void)
 	
 	platform_driver_unregister(&ali_ircc_driver);
 
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 }
 
 /*
@@ -273,11 +273,11 @@ static int ali_ircc_open(int i, chipio_t *info)
 	int dongle_id;
 	int err;
 			
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 
 	if (i >= ARRAY_SIZE(dev_self)) {
 		IRDA_ERROR("%s(), maximum number of supported chips reached!\n",
-			   __FUNCTION__);
+			   __func__);
 		return -ENOMEM;
 	}
 	
@@ -288,7 +288,7 @@ static int ali_ircc_open(int i, chipio_t *info)
 	dev = alloc_irdadev(sizeof(*self));
 	if (dev == NULL) {
 		IRDA_ERROR("%s(), can't allocate memory for control block!\n",
-			   __FUNCTION__);
+			   __func__);
 		return -ENOMEM;
 	}
 
@@ -312,7 +312,7 @@ static int ali_ircc_open(int i, chipio_t *info)
 	/* Reserve the ioports that we need */
 	if (!request_region(self->io.fir_base, self->io.fir_ext,
 			    ALI_IRCC_DRIVER_NAME)) {
-		IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__,
+		IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __func__,
 			self->io.fir_base);
 		err = -ENODEV;
 		goto err_out1;
@@ -370,19 +370,19 @@ static int ali_ircc_open(int i, chipio_t *info)
 
 	err = register_netdev(dev);
 	if (err) {
-		IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
 		goto err_out4;
 	}
 	IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
 
 	/* Check dongle id */
 	dongle_id = ali_ircc_read_dongle_id(i, info);
-	IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __FUNCTION__,
+	IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __func__,
 		     ALI_IRCC_DRIVER_NAME, dongle_types[dongle_id]);
 		
 	self->io.dongle_id = dongle_id;
 
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 	
 	return 0;
 
@@ -411,7 +411,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
@@ -421,7 +421,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self)
 	unregister_netdev(self->netdev);
 
 	/* Release the PORT that this driver is using */
-	IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __FUNCTION__, self->io.fir_base);
+	IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -435,7 +435,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self)
 	dev_self[self->index] = NULL;
 	free_netdev(self->netdev);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 	
 	return 0;
 }
@@ -478,7 +478,7 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
 	int cfg_base = info->cfg_base;
 	int hi, low, reg;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	/* Enter Configuration */
 	outb(chip->entr1, cfg_base);
@@ -497,13 +497,13 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
 	
 	info->sir_base = info->fir_base;
 	
-	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, info->fir_base);
+	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base);
 		
 	/* Read IRQ control register */
 	outb(0x70, cfg_base);
 	reg = inb(cfg_base+1);
 	info->irq = reg & 0x0f;
-	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
 	
 	/* Read DMA channel */
 	outb(0x74, cfg_base);
@@ -511,26 +511,26 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
 	info->dma = reg & 0x07;
 	
 	if(info->dma == 0x04)
-		IRDA_WARNING("%s(), No DMA channel assigned !\n", __FUNCTION__);
+		IRDA_WARNING("%s(), No DMA channel assigned !\n", __func__);
 	else
-		IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+		IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
 	
 	/* Read Enabled Status */
 	outb(0x30, cfg_base);
 	reg = inb(cfg_base+1);
 	info->enabled = (reg & 0x80) && (reg & 0x01);
-	IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __FUNCTION__, info->enabled);
+	IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __func__, info->enabled);
 	
 	/* Read Power Status */
 	outb(0x22, cfg_base);
 	reg = inb(cfg_base+1);
 	info->suspended = (reg & 0x20);
-	IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __FUNCTION__, info->suspended);
+	IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __func__, info->suspended);
 	
 	/* Exit configuration */
 	outb(0xbb, cfg_base);
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 	
 	return 0;	
 }
@@ -548,7 +548,7 @@ static int ali_ircc_setup(chipio_t *info)
 	int version;
 	int iobase = info->fir_base;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	/* Locking comments :
 	 * Most operations here need to be protected. We are called before
@@ -609,7 +609,7 @@ static int ali_ircc_setup(chipio_t *info)
 	// outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
 	// Turn on the interrupts in ali_ircc_net_open
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 	
 	return 0;
 }
@@ -626,7 +626,7 @@ static int ali_ircc_read_dongle_id (int i, chipio_t *info)
 	int dongle_id, reg;
 	int cfg_base = info->cfg_base;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 		
 	/* Enter Configuration */
 	outb(chips[i].entr1, cfg_base);
@@ -640,13 +640,13 @@ static int ali_ircc_read_dongle_id (int i, chipio_t *info)
 	outb(0xf0, cfg_base);
 	reg = inb(cfg_base+1);	
 	dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
-	IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __FUNCTION__, 
+	IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __func__,
 		dongle_id, dongle_types[dongle_id]);
 	
 	/* Exit configuration */
 	outb(0xbb, cfg_base);
 			
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 	
 	return dongle_id;
 }
@@ -663,7 +663,7 @@ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id)
 	struct ali_ircc_cb *self;
 	int ret;
 		
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 		
 	self = dev->priv;
 	
@@ -677,7 +677,7 @@ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id)
 		
 	spin_unlock(&self->lock);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 	return ret;
 }
 /*
@@ -691,7 +691,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 	__u8 eir, OldMessageCount;
 	int iobase, tmp;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	iobase = self->io.fir_base;
 	
@@ -704,10 +704,10 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 	//self->ier = inb(iobase+FIR_IER); 		2000/12/1 04:32PM
 	eir = self->InterruptID & self->ier; /* Mask out the interesting ones */ 
 	
-	IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __FUNCTION__,self->InterruptID);
-	IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __FUNCTION__,self->LineStatus);
-	IRDA_DEBUG(1, "%s(), self->ier = %x\n", __FUNCTION__,self->ier);
-	IRDA_DEBUG(1, "%s(), eir = %x\n", __FUNCTION__,eir);
+	IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __func__,self->InterruptID);
+	IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __func__,self->LineStatus);
+	IRDA_DEBUG(1, "%s(), self->ier = %x\n", __func__,self->ier);
+	IRDA_DEBUG(1, "%s(), eir = %x\n", __func__,eir);
 	
 	/* Disable interrupts */
 	 SetCOMInterrupts(self, FALSE);
@@ -718,7 +718,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 	{		
 		if (self->io.direction == IO_XMIT) /* TX */
 		{
-			IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __FUNCTION__);
+			IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __func__);
 			
 			if(ali_ircc_dma_xmit_complete(self))
 			{
@@ -737,23 +737,23 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 		}	
 		else /* RX */
 		{
-			IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __FUNCTION__);
+			IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __func__);
 			
 			if(OldMessageCount > ((self->LineStatus+1) & 0x07))
 			{
 				self->rcvFramesOverflow = TRUE;	
-				IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __FUNCTION__);
+				IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __func__);
 			}
 						
 			if (ali_ircc_dma_receive_complete(self))
 			{
-				IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __FUNCTION__);
+				IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __func__);
 				
 				self->ier = IER_EOM;				
 			}
 			else
 			{
-				IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __FUNCTION__);
+				IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __func__);
 				
 				self->ier = IER_EOM | IER_TIMER;								
 			}	
@@ -766,7 +766,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 		if(OldMessageCount > ((self->LineStatus+1) & 0x07))
 		{
 			self->rcvFramesOverflow = TRUE;	
-			IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __FUNCTION__);
+			IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __func__);
 		}
 		/* Disable Timer */
 		switch_bank(iobase, BANK1);
@@ -798,7 +798,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 	/* Restore Interrupt */	
 	SetCOMInterrupts(self, TRUE);	
 		
-	IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __func__);
 	return IRQ_RETVAL(eir);
 }
 
@@ -813,7 +813,7 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
 	int iobase;
 	int iir, lsr;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	iobase = self->io.sir_base;
 
@@ -822,13 +822,13 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
 		/* Clear interrupt */
 		lsr = inb(iobase+UART_LSR);
 
-		IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__, 
+		IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __func__,
 			   iir, lsr, iobase);
 
 		switch (iir) 
 		{
 			case UART_IIR_RLSI:
-				IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
+				IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
 				break;
 			case UART_IIR_RDI:
 				/* Receive interrupt */
@@ -842,14 +842,14 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
 				}				
 				break;
 			default:
-				IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir);
+				IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __func__, iir);
 				break;
 		} 
 		
 	}
 	
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 
 	return IRQ_RETVAL(iir);
 }
@@ -866,7 +866,7 @@ static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
 	int boguscount = 0;
 	int iobase;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	IRDA_ASSERT(self != NULL, return;);
 
 	iobase = self->io.sir_base;
@@ -881,12 +881,12 @@ static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
 
 		/* Make sure we don't stay here too long */
 		if (boguscount++ > 32) {
-			IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__);
+			IRDA_DEBUG(2,"%s(), breaking!\n", __func__);
 			break;
 		}
 	} while (inb(iobase+UART_LSR) & UART_LSR_DR);	
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -903,7 +903,7 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
 
 	IRDA_ASSERT(self != NULL, return;);
 
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	iobase = self->io.sir_base;
 
@@ -922,16 +922,16 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
 		{
 			/* We must wait until all data are gone */
 			while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
-				IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __FUNCTION__ );
+				IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __func__ );
 			
-			IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __FUNCTION__ , self->new_speed);
+			IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __func__ , self->new_speed);
 			ali_ircc_change_speed(self, self->new_speed);
 			self->new_speed = 0;			
 			
 			// benjamin 2000/11/10 06:32PM
 			if (self->io.speed > 115200)
 			{
-				IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __FUNCTION__ );				
+				IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __func__ );
 					
 				self->ier = IER_EOM;
 				// SetCOMInterrupts(self, TRUE);							
@@ -949,7 +949,7 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
 		outb(UART_IER_RDI, iobase+UART_IER);
 	}
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
@@ -957,9 +957,9 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
 	struct net_device *dev = self->netdev;
 	int iobase;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
-	IRDA_DEBUG(2, "%s(), setting speed = %d \n", __FUNCTION__ , baud);
+	IRDA_DEBUG(2, "%s(), setting speed = %d \n", __func__ , baud);
 	
 	/* This function *must* be called with irq off and spin-lock.
 	 * - Jean II */
@@ -998,7 +998,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
 		
 	netif_wake_queue(self->netdev);	
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
@@ -1008,14 +1008,14 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
 	struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
 	struct net_device *dev;
 
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 		
 	IRDA_ASSERT(self != NULL, return;);
 
 	dev = self->netdev;
 	iobase = self->io.fir_base;
 	
-	IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __FUNCTION__ ,self->io.speed,baud);
+	IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __func__ ,self->io.speed,baud);
 	
 	/* Come from SIR speed */
 	if(self->io.speed <=115200)
@@ -1029,7 +1029,7 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
 	// Set Dongle Speed mode
 	ali_ircc_change_dongle_speed(self, baud);
 		
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -1047,9 +1047,9 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
 	int lcr;    /* Line control reg */
 	int divisor;
 
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
-	IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __FUNCTION__ , speed);
+	IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __func__ , speed);
 
 	IRDA_ASSERT(self != NULL, return;);
 
@@ -1103,7 +1103,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
 	
 	spin_unlock_irqrestore(&self->lock, flags);
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
@@ -1113,14 +1113,14 @@ static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
 	int iobase,dongle_id;
 	int tmp = 0;
 			
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	iobase = self->io.fir_base; 	/* or iobase = self->io.sir_base; */
 	dongle_id = self->io.dongle_id;
 	
 	/* We are already locked, no need to do it again */
 		
-	IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __FUNCTION__ , dongle_types[dongle_id], speed);		
+	IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __func__ , dongle_types[dongle_id], speed);
 	
 	switch_bank(iobase, BANK2);
 	tmp = inb(iobase+FIR_IRDA_CR);
@@ -1284,7 +1284,7 @@ static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
 			
 	switch_bank(iobase, BANK0);
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );		
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -1297,11 +1297,11 @@ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
 {
 	int actual = 0;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 		
 	/* Tx FIFO should be empty! */
 	if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
-		IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __FUNCTION__ );
+		IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __func__ );
 		return 0;
 	}
         
@@ -1313,7 +1313,7 @@ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
 		actual++;
 	}
 	
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	return actual;
 }
 
@@ -1329,7 +1329,7 @@ static int ali_ircc_net_open(struct net_device *dev)
 	int iobase;
 	char hwname[32];
 		
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	
@@ -1375,7 +1375,7 @@ static int ali_ircc_net_open(struct net_device *dev)
 	 */
 	self->irlap = irlap_open(dev, &self->qos, hwname);
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return 0;
 }
@@ -1392,7 +1392,7 @@ static int ali_ircc_net_close(struct net_device *dev)
 	struct ali_ircc_cb *self;
 	//int iobase;
 			
-	IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__ );
 		
 	IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -1415,7 +1415,7 @@ static int ali_ircc_net_close(struct net_device *dev)
 	free_irq(self->io.irq, dev);
 	free_dma(self->io.dma);
 
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return 0;
 }
@@ -1434,7 +1434,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 	__u32 speed;
 	int mtt, diff;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	self = (struct ali_ircc_cb *) dev->priv;
 	iobase = self->io.fir_base;
@@ -1488,7 +1488,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 			diff = self->now.tv_usec - self->stamp.tv_usec;
 			/* self->stamp is set from ali_ircc_dma_receive_complete() */
 							
-			IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __FUNCTION__ , diff);	
+			IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __func__ , diff);
 			
 			if (diff < 0) 
 				diff += 1000000;
@@ -1510,7 +1510,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 					/* Adjust for timer resolution */
 					mtt = (mtt+250) / 500; 	/* 4 discard, 5 get advanced, Let's round off */
 					
-					IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __FUNCTION__ , mtt);	
+					IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __func__ , mtt);
 					
 					/* Setup timer */
 					if (mtt == 1) /* 500 us */
@@ -1567,7 +1567,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&self->lock, flags);
 	dev_kfree_skb(skb);
 
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return 0;	
 }
 
@@ -1578,7 +1578,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
 	unsigned char FIFO_OPTI, Hi, Lo;
 	
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	iobase = self->io.fir_base;
 	
@@ -1629,7 +1629,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
 	tmp = inb(iobase+FIR_LCR_B);
 	tmp &= ~0x20; // Disable SIP
 	outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B);
-	IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
+	IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __func__ , inb(iobase+FIR_LCR_B));
 	
 	outb(0, iobase+FIR_LSR);
 			
@@ -1639,7 +1639,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
 	
 	switch_bank(iobase, BANK0); 
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
@@ -1647,7 +1647,7 @@ static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
 	int iobase;
 	int ret = TRUE;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	iobase = self->io.fir_base;
 	
@@ -1660,7 +1660,7 @@ static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
 	if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT)
 	
 	{
-		IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __FUNCTION__);	
+		IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __func__);
 		self->stats.tx_errors++;
 		self->stats.tx_fifo_errors++;		
 	}
@@ -1703,7 +1703,7 @@ static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
 		
 	switch_bank(iobase, BANK0); 
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return ret;
 }
 
@@ -1718,7 +1718,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
 {
 	int iobase, tmp;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	iobase = self->io.fir_base;
 	
@@ -1756,7 +1756,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
 	//switch_bank(iobase, BANK0);
 	tmp = inb(iobase+FIR_LCR_B);
 	outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM
-	IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
+	IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __func__ , inb(iobase+FIR_LCR_B));
 			
 	/* Set Rx Threshold */
 	switch_bank(iobase, BANK1);
@@ -1768,7 +1768,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
 	outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
 				
 	switch_bank(iobase, BANK0); 
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return 0;
 }
 
@@ -1779,7 +1779,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 	__u8 status, MessageCount;
 	int len, i, iobase, val;	
 
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 
 	st_fifo = &self->st_fifo;		
 	iobase = self->io.fir_base;	
@@ -1788,7 +1788,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 	MessageCount = inb(iobase+ FIR_LSR)&0x07;
 	
 	if (MessageCount > 0)	
-		IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __FUNCTION__ , MessageCount);	
+		IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
 		
 	for (i=0; i<=MessageCount; i++)
 	{
@@ -1801,11 +1801,11 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 		len = len << 8; 
 		len |= inb(iobase+FIR_RX_DSR_LO);
 		
-		IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __FUNCTION__ , len);	
-		IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __FUNCTION__ , status);
+		IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __func__ , len);
+		IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __func__ , status);
 		
 		if (st_fifo->tail >= MAX_RX_WINDOW) {
-			IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__ );
+			IRDA_DEBUG(0, "%s(), window is full!\n", __func__ );
 			continue;
 		}
 			
@@ -1828,7 +1828,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 		/* Check for errors */
 		if ((status & 0xd8) || self->rcvFramesOverflow || (len==0)) 		
 		{
-			IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __FUNCTION__ );	
+			IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __func__ );
 			
 			/* Skip frame */
 			self->stats.rx_errors++;
@@ -1838,29 +1838,29 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 			if (status & LSR_FIFO_UR) 
 			{
 				self->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __FUNCTION__ );
+				IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __func__ );
 			}	
 			if (status & LSR_FRAME_ERROR)
 			{
 				self->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __FUNCTION__ );
+				IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __func__ );
 			}
 							
 			if (status & LSR_CRC_ERROR) 
 			{
 				self->stats.rx_crc_errors++;
-				IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __FUNCTION__ );
+				IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __func__ );
 			}
 			
 			if(self->rcvFramesOverflow)
 			{
 				self->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __FUNCTION__ );								
+				IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __func__ );
 			}
 			if(len == 0)
 			{
 				self->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __FUNCTION__ );
+				IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __func__ );
 			}
 		}	 
 		else 
@@ -1872,7 +1872,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 				val = inb(iobase+FIR_BSR);	
 				if ((val& BSR_FIFO_NOT_EMPTY)== 0x80) 
 				{
-					IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __FUNCTION__ );
+					IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __func__ );
 					
 					/* Put this entry back in fifo */
 					st_fifo->head--;
@@ -1909,7 +1909,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 			{
 				IRDA_WARNING("%s(), memory squeeze, "
 					     "dropping frame.\n",
-					     __FUNCTION__);
+					     __func__);
 				self->stats.rx_dropped++;
 
 				return FALSE;
@@ -1937,7 +1937,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 	
 	switch_bank(iobase, BANK0);	
 		
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return TRUE;
 }
 
@@ -1956,7 +1956,7 @@ static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 	int iobase;
 	__u32 speed;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return 0;);
 	
@@ -2005,7 +2005,7 @@ static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev_kfree_skb(skb);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return 0;	
 }
@@ -2024,7 +2024,7 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	unsigned long flags;
 	int ret = 0;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -2032,11 +2032,11 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
 	
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
-		IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __FUNCTION__ );
+		IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __func__ );
 		/*
 		 * This function will also be used by IrLAP to change the
 		 * speed, so we still must allow for speed change within
@@ -2050,13 +2050,13 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		spin_unlock_irqrestore(&self->lock, flags);
 		break;
 	case SIOCSMEDIABUSY: /* Set media busy */
-		IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __FUNCTION__ );
+		IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __func__ );
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 		irda_device_set_media_busy(self->netdev, TRUE);
 		break;
 	case SIOCGRECEIVING: /* Check if we are receiving right now */
-		IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __FUNCTION__ );
+		IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __func__ );
 		/* This is protected */
 		irq->ifr_receiving = ali_ircc_is_receiving(self);
 		break;
@@ -2064,7 +2064,7 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		ret = -EOPNOTSUPP;
 	}
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return ret;
 }
@@ -2081,7 +2081,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
 	int status = FALSE;
 	int iobase;		
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	IRDA_ASSERT(self != NULL, return FALSE;);
 
@@ -2095,7 +2095,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
 		if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0) 		
 		{
 			/* We are receiving something */
-			IRDA_DEBUG(1, "%s(), We are receiving something\n", __FUNCTION__ );
+			IRDA_DEBUG(1, "%s(), We are receiving something\n", __func__ );
 			status = TRUE;
 		}
 		switch_bank(iobase, BANK0);		
@@ -2107,7 +2107,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
 	
 	spin_unlock_irqrestore(&self->lock, flags);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return status;
 }
@@ -2116,9 +2116,9 @@ static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev)
 {
 	struct ali_ircc_cb *self = (struct ali_ircc_cb *) dev->priv;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return &self->stats;
 }
@@ -2164,7 +2164,7 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
 	
 	int iobase = self->io.fir_base; /* or sir_base */
 
-	IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __FUNCTION__ , enable);	
+	IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __func__ , enable);
 	
 	/* Enable the interrupt which we wish to */
 	if (enable){
@@ -2205,14 +2205,14 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
 	else
 		outb(newMask, iobase+UART_IER);
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void SIR2FIR(int iobase)
 {
 	//unsigned char tmp;
 		
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	/* Already protected (change_speed() or setup()), no need to lock.
 	 * Jean II */
@@ -2228,14 +2228,14 @@ static void SIR2FIR(int iobase)
 	//tmp |= 0x20;
 	//outb(tmp, iobase+FIR_LCR_B);	
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );	
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void FIR2SIR(int iobase)
 {
 	unsigned char val;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	/* Already protected (change_speed() or setup()), no need to lock.
 	 * Jean II */
@@ -2251,7 +2251,7 @@ static void FIR2SIR(int iobase)
 	val = inb(iobase+UART_LSR);
 	val = inb(iobase+UART_MSR);
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 34ad189fff6..69d16b30323 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -245,7 +245,7 @@ toshoboe_dumpregs (struct toshoboe_cb *self)
 {
   __u32 ringbase;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   ringbase = INB (OBOE_RING_BASE0) << 10;
   ringbase |= INB (OBOE_RING_BASE1) << 18;
@@ -293,7 +293,7 @@ static void
 toshoboe_disablebm (struct toshoboe_cb *self)
 {
   __u8 command;
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   pci_read_config_byte (self->pdev, PCI_COMMAND, &command);
   command &= ~PCI_COMMAND_MASTER;
@@ -305,7 +305,7 @@ toshoboe_disablebm (struct toshoboe_cb *self)
 static void
 toshoboe_stopchip (struct toshoboe_cb *self)
 {
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   /*Disable interrupts */
   OUTB (0x0, OBOE_IER);
@@ -350,7 +350,7 @@ toshoboe_setbaud (struct toshoboe_cb *self)
   __u16 pconfig = 0;
   __u8 config0l = 0;
 
-  IRDA_DEBUG (2, "%s(%d/%d)\n", __FUNCTION__, self->speed, self->io.speed);
+  IRDA_DEBUG (2, "%s(%d/%d)\n", __func__, self->speed, self->io.speed);
 
   switch (self->speed)
     {
@@ -482,7 +482,7 @@ toshoboe_setbaud (struct toshoboe_cb *self)
 static void
 toshoboe_enablebm (struct toshoboe_cb *self)
 {
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
   pci_set_master (self->pdev);
 }
 
@@ -492,7 +492,7 @@ toshoboe_initring (struct toshoboe_cb *self)
 {
   int i;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   for (i = 0; i < TX_SLOTS; ++i)
     {
@@ -550,7 +550,7 @@ toshoboe_startchip (struct toshoboe_cb *self)
 {
   __u32 physaddr;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   toshoboe_initring (self);
   toshoboe_enablebm (self);
@@ -824,7 +824,7 @@ toshoboe_probe (struct toshoboe_cb *self)
 #endif
   unsigned long flags;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if (request_irq (self->io.irq, toshoboe_probeinterrupt,
                    self->io.irqflags, "toshoboe", (void *) self))
@@ -983,10 +983,10 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
 
   IRDA_ASSERT (self != NULL, return 0; );
 
-  IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __FUNCTION__
+  IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __func__
       ,skb->len,self->txpending,INB (OBOE_ENABLEH));
   if (!cb->magic) {
-      IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __FUNCTION__, cb->magic);
+      IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __func__, cb->magic);
 #ifdef DUMP_PACKETS
       _dumpbufs(skb->data,skb->len,'>');
 #endif
@@ -1015,7 +1015,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
         {
           self->new_speed = speed;
           IRDA_DEBUG (1, "%s: Queued TxDone scheduled speed change %d\n" ,
-		      __FUNCTION__, speed);
+		      __func__, speed);
           /* if no data, that's all! */
           if (!skb->len)
             {
@@ -1057,7 +1057,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
       /* which we will add a wrong checksum to */
 
       mtt = toshoboe_makemttpacket (self, self->tx_bufs[self->txs], mtt);
-      IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __func__
           ,skb->len,mtt,self->txpending);
       if (mtt)
         {
@@ -1101,7 +1101,7 @@ dumpbufs(skb->data,skb->len,'>');
 
   if (self->ring->tx[self->txs].control & OBOE_CTL_TX_HW_OWNS)
     {
-      IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __FUNCTION__
+      IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __func__
           ,skb->len, self->ring->tx[self->txs].control, self->txpending);
       toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
       spin_unlock_irqrestore(&self->spinlock, flags);
@@ -1179,7 +1179,7 @@ toshoboe_interrupt (int irq, void *dev_id)
           if (self->ring->tx[i].control & OBOE_CTL_TX_HW_OWNS)
               self->txpending++;
         }
-      IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __func__
           ,irqstat,txp,self->txpending);
 
       txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
@@ -1209,7 +1209,7 @@ toshoboe_interrupt (int irq, void *dev_id)
         {
           self->speed = self->new_speed;
           IRDA_DEBUG (1, "%s: Executed TxDone scheduled speed change %d\n",
-		      __FUNCTION__, self->speed);
+		      __func__, self->speed);
           toshoboe_setbaud (self);
         }
 
@@ -1224,7 +1224,7 @@ toshoboe_interrupt (int irq, void *dev_id)
         {
           int len = self->ring->rx[self->rxs].len;
           skb = NULL;
-          IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __FUNCTION__
+          IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __func__
 		      ,len,self->ring->rx[self->rxs].control);
 
 #ifdef DUMP_PACKETS
@@ -1246,7 +1246,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                       len -= 2;
                   else
                       len = 0;
-                  IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __func__, len,enable);
                 }
 
 #ifdef USE_MIR
@@ -1256,7 +1256,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                       len -= 2;
                   else
                       len = 0;
-                  IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __func__, len,enable);
                 }
 #endif
               else if (enable & OBOE_ENABLEH_FIRON)
@@ -1265,10 +1265,10 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                       len -= 4;   /*FIXME: check this */
                   else
                       len = 0;
-                  IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __func__, len,enable);
                 }
               else
-                  IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __func__, len,enable);
 
               if (len)
                 {
@@ -1289,7 +1289,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                     {
                       printk (KERN_INFO
                               "%s(), memory squeeze, dropping frame.\n",
-			      __FUNCTION__);
+			      __func__);
                     }
                 }
             }
@@ -1301,7 +1301,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
             /* (SIR) data is splitted in several slots. */
             /* we have to join all the received buffers received */
             /*in a large buffer before checking CRC. */
-            IRDA_DEBUG (0, "%s.err:%x(%x)\n", __FUNCTION__
+            IRDA_DEBUG (0, "%s.err:%x(%x)\n", __func__
                 ,len,self->ring->rx[self->rxs].control);
             }
 
@@ -1329,7 +1329,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
   if (irqstat & OBOE_INT_SIP)
     {
       self->int_sip++;
-      IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __func__
 	      ,self->int_sip,irqstat,self->txpending);
     }
   return IRQ_HANDLED;
@@ -1343,7 +1343,7 @@ toshoboe_net_open (struct net_device *dev)
   unsigned long flags;
   int rc;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   self = netdev_priv(dev);
 
@@ -1381,7 +1381,7 @@ toshoboe_net_close (struct net_device *dev)
 {
   struct toshoboe_cb *self;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   IRDA_ASSERT (dev != NULL, return -1; );
   self = (struct toshoboe_cb *) dev->priv;
@@ -1426,7 +1426,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 
   IRDA_ASSERT (self != NULL, return -1; );
 
-  IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+  IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
   /* Disable interrupts & save flags */
   spin_lock_irqsave(&self->spinlock, flags);
@@ -1438,7 +1438,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
        * speed, so we still must allow for speed change within
        * interrupt context.
        */
-      IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __func__
           ,dev->name, INB (OBOE_STATUS), irq->ifr_baudrate );
       if (!in_interrupt () && !capable (CAP_NET_ADMIN)) {
 	ret = -EPERM;
@@ -1451,7 +1451,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
       self->new_speed = irq->ifr_baudrate;
       break;
     case SIOCSMEDIABUSY:       /* Set media busy */
-      IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __func__
           ,dev->name, INB (OBOE_STATUS), capable (CAP_NET_ADMIN) );
       if (!capable (CAP_NET_ADMIN)) {
 	ret = -EPERM;
@@ -1461,11 +1461,11 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
       break;
     case SIOCGRECEIVING:       /* Check if we are receiving right now */
       irq->ifr_receiving = (INB (OBOE_STATUS) & OBOE_STATUS_RXBUSY) ? 1 : 0;
-      IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __FUNCTION__
+      IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __func__
           ,dev->name, INB (OBOE_STATUS), irq->ifr_receiving );
       break;
     default:
-      IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+      IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
       ret = -EOPNOTSUPP;
     }
 out:
@@ -1492,7 +1492,7 @@ toshoboe_close (struct pci_dev *pci_dev)
   int i;
   struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   IRDA_ASSERT (self != NULL, return; );
 
@@ -1533,7 +1533,7 @@ toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid)
   int ok = 0;
   int err;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if ((err=pci_enable_device(pci_dev)))
     return err;
@@ -1700,7 +1700,7 @@ toshoboe_gotosleep (struct pci_dev *pci_dev, pm_message_t crap)
   unsigned long flags;
   int i = 10;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if (!self || self->stopped)
     return 0;
@@ -1728,7 +1728,7 @@ toshoboe_wakeup (struct pci_dev *pci_dev)
   struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
   unsigned long flags;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if (!self || !self->stopped)
     return 0;
diff --git a/drivers/net/irda/ep7211-sir.c b/drivers/net/irda/ep7211-sir.c
index 831572429bb..f83c5b881d2 100644
--- a/drivers/net/irda/ep7211-sir.c
+++ b/drivers/net/irda/ep7211-sir.c
@@ -14,7 +14,7 @@
 #include <net/irda/irda_device.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "sir-dev.h"
 
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
index 738531b16bd..a31b8fa8aaa 100644
--- a/drivers/net/irda/girbil-sir.c
+++ b/drivers/net/irda/girbil-sir.c
@@ -86,7 +86,7 @@ static int girbil_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power on dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -102,7 +102,7 @@ static int girbil_open(struct sir_dev *dev)
 
 static int girbil_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -126,7 +126,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed)
 	u8 control[2];
 	static int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* dongle alread reset - port and dongle at default speed */
 
@@ -179,7 +179,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed)
 		break;
 
 	default:
-		IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s - undefined state %d\n", __func__, state);
 		ret = -EINVAL;
 		break;
 	}
@@ -209,7 +209,7 @@ static int girbil_reset(struct sir_dev *dev)
 	u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_RESET:
@@ -241,7 +241,7 @@ static int girbil_reset(struct sir_dev *dev)
 		break;
 
 	default:
-		IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s(), undefined state %d\n", __func__, state);
 		ret = -1;
 		break;
 	}
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 18b471cd144..b5d6b9ac162 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -177,12 +177,12 @@ static void irda_usb_build_header(struct irda_usb_cb *self,
 		    (!force) && (self->speed != -1)) {
 			/* No speed and xbofs change here
 			 * (we'll do it later in the write callback) */
-			IRDA_DEBUG(2, "%s(), not changing speed yet\n", __FUNCTION__);
+			IRDA_DEBUG(2, "%s(), not changing speed yet\n", __func__);
 			*header = 0;
 			return;
 		}
 
-		IRDA_DEBUG(2, "%s(), changing speed to %d\n", __FUNCTION__, self->new_speed);
+		IRDA_DEBUG(2, "%s(), changing speed to %d\n", __func__, self->new_speed);
 		self->speed = self->new_speed;
 		/* We will do ` self->new_speed = -1; ' in the completion
 		 * handler just in case the current URB fail - Jean II */
@@ -228,7 +228,7 @@ static void irda_usb_build_header(struct irda_usb_cb *self,
 	
 	/* Set the negotiated additional XBOFS */
 	if (self->new_xbofs != -1) {
-		IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __FUNCTION__, self->new_xbofs);
+		IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __func__, self->new_xbofs);
 		self->xbofs = self->new_xbofs;
 		/* We will do ` self->new_xbofs = -1; ' in the completion
 		 * handler just in case the current URB fail - Jean II */
@@ -302,13 +302,13 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
 	struct urb *urb;
 	int ret;
 
-	IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __FUNCTION__,
+	IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __func__,
 		   self->new_speed, self->new_xbofs);
 
 	/* Grab the speed URB */
 	urb = self->speed_urb;
 	if (urb->status != 0) {
-		IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), URB still in use!\n", __func__);
 		return;
 	}
 
@@ -334,7 +334,7 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
 
 	/* Irq disabled -> GFP_ATOMIC */
 	if ((ret = usb_submit_urb(urb, GFP_ATOMIC))) {
-		IRDA_WARNING("%s(), failed Speed URB\n", __FUNCTION__);
+		IRDA_WARNING("%s(), failed Speed URB\n", __func__);
 	}
 }
 
@@ -347,7 +347,7 @@ static void speed_bulk_callback(struct urb *urb)
 {
 	struct irda_usb_cb *self = urb->context;
 	
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* We should always have a context */
 	IRDA_ASSERT(self != NULL, return;);
@@ -357,7 +357,7 @@ static void speed_bulk_callback(struct urb *urb)
 	/* Check for timeout and other USB nasties */
 	if (urb->status != 0) {
 		/* I get a lot of -ECONNABORTED = -103 here - Jean II */
-		IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+		IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
 
 		/* Don't do anything here, that might confuse the USB layer.
 		 * Instead, we will wait for irda_usb_net_timeout(), the
@@ -392,7 +392,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	int res, mtt;
 	int	err = 1;	/* Failed */
 
-	IRDA_DEBUG(4, "%s() on %s\n", __FUNCTION__, netdev->name);
+	IRDA_DEBUG(4, "%s() on %s\n", __func__, netdev->name);
 
 	netif_stop_queue(netdev);
 
@@ -403,7 +403,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	 * We need to check self->present under the spinlock because
 	 * of irda_usb_disconnect() is synchronous - Jean II */
 	if (!self->present) {
-		IRDA_DEBUG(0, "%s(), Device is gone...\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), Device is gone...\n", __func__);
 		goto drop;
 	}
 
@@ -437,7 +437,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	}
 
 	if (urb->status != 0) {
-		IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), URB still in use!\n", __func__);
 		goto drop;
 	}
 
@@ -524,7 +524,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	
 	/* Ask USB to send the packet - Irq disabled -> GFP_ATOMIC */
 	if ((res = usb_submit_urb(urb, GFP_ATOMIC))) {
-		IRDA_WARNING("%s(), failed Tx URB\n", __FUNCTION__);
+		IRDA_WARNING("%s(), failed Tx URB\n", __func__);
 		self->stats.tx_errors++;
 		/* Let USB recover : We will catch that in the watchdog */
 		/*netif_start_queue(netdev);*/
@@ -556,7 +556,7 @@ static void write_bulk_callback(struct urb *urb)
 	struct sk_buff *skb = urb->context;
 	struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context;
 	
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* We should always have a context */
 	IRDA_ASSERT(self != NULL, return;);
@@ -570,7 +570,7 @@ static void write_bulk_callback(struct urb *urb)
 	/* Check for timeout and other USB nasties */
 	if (urb->status != 0) {
 		/* I get a lot of -ECONNABORTED = -103 here - Jean II */
-		IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+		IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
 
 		/* Don't do anything here, that might confuse the USB layer,
 		 * and we could go in recursion and blow the kernel stack...
@@ -589,7 +589,7 @@ static void write_bulk_callback(struct urb *urb)
 
 	/* If the network is closed, stop everything */
 	if ((!self->netopen) || (!self->present)) {
-		IRDA_DEBUG(0, "%s(), Network is gone...\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), Network is gone...\n", __func__);
 		spin_unlock_irqrestore(&self->lock, flags);
 		return;
 	}
@@ -600,7 +600,7 @@ static void write_bulk_callback(struct urb *urb)
 		    (self->new_xbofs != self->xbofs)) {
 			/* We haven't changed speed yet (because of
 			 * IUC_SPEED_BUG), so do it now - Jean II */
-			IRDA_DEBUG(1, "%s(), Changing speed now...\n", __FUNCTION__);
+			IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
 			irda_usb_change_speed_xbofs(self);
 		} else {
 			/* New speed and xbof is now commited in hardware */
@@ -632,7 +632,7 @@ static void irda_usb_net_timeout(struct net_device *netdev)
 	struct urb *urb;
 	int	done = 0;	/* If we have made any progress */
 
-	IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __FUNCTION__);
+	IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __func__);
 	IRDA_ASSERT(self != NULL, return;);
 
 	/* Protect us from USB callbacks, net Tx and else. */
@@ -640,7 +640,7 @@ static void irda_usb_net_timeout(struct net_device *netdev)
 
 	/* self->present *MUST* be read under spinlock */
 	if (!self->present) {
-		IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), device not present!\n", __func__);
 		netif_stop_queue(netdev);
 		spin_unlock_irqrestore(&self->lock, flags);
 		return;
@@ -763,7 +763,7 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc
 	struct irda_skb_cb *cb;
 	int ret;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* This should never happen */
 	IRDA_ASSERT(skb != NULL, return;);
@@ -786,7 +786,7 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc
 		/* If this ever happen, we are in deep s***.
 		 * Basically, the Rx path will stop... */
 		IRDA_WARNING("%s(), Failed to submit Rx URB %d\n",
-			     __FUNCTION__, ret);
+			     __func__, ret);
 	}
 }
 
@@ -807,7 +807,7 @@ static void irda_usb_receive(struct urb *urb)
 	struct urb *next_urb;
 	unsigned int len, docopy;
 
-	IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
+	IRDA_DEBUG(2, "%s(), len=%d\n", __func__, urb->actual_length);
 	
 	/* Find ourselves */
 	cb = (struct irda_skb_cb *) skb->cb;
@@ -817,7 +817,7 @@ static void irda_usb_receive(struct urb *urb)
 
 	/* If the network is closed or the device gone, stop everything */
 	if ((!self->netopen) || (!self->present)) {
-		IRDA_DEBUG(0, "%s(), Network is gone!\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), Network is gone!\n", __func__);
 		/* Don't re-submit the URB : will stall the Rx path */
 		return;
 	}
@@ -840,7 +840,7 @@ static void irda_usb_receive(struct urb *urb)
 			/* Usually precursor to a hot-unplug on OHCI. */
 		default:
 			self->stats.rx_errors++;
-			IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
+			IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __func__, urb->status, urb->transfer_flags);
 			break;
 		}
 		/* If we received an error, we don't want to resubmit the
@@ -861,7 +861,7 @@ static void irda_usb_receive(struct urb *urb)
 	
 	/* Check for empty frames */
 	if (urb->actual_length <= self->header_length) {
-		IRDA_WARNING("%s(), empty frame!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), empty frame!\n", __func__);
 		goto done;
 	}
 
@@ -967,7 +967,7 @@ static void irda_usb_rx_defer_expired(unsigned long data)
 	struct irda_skb_cb *cb;
 	struct urb *next_urb;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Find ourselves */
 	cb = (struct irda_skb_cb *) skb->cb;
@@ -1053,7 +1053,7 @@ static int stir421x_fw_upload(struct irda_usb_cb *self,
 				   patch_block, block_size,
 				   &actual_len, msecs_to_jiffies(500));
 		IRDA_DEBUG(3,"%s(): Bulk send %u bytes, ret=%d\n",
-			   __FUNCTION__, actual_len, ret);
+			   __func__, actual_len, ret);
 
 		if (ret < 0)
 			break;
@@ -1092,7 +1092,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self)
 
         /* We get a patch from userspace */
         IRDA_MESSAGE("%s(): Received firmware %s (%zu bytes)\n",
-                     __FUNCTION__, stir421x_fw_name, fw->size);
+                     __func__, stir421x_fw_name, fw->size);
 
         ret = -EINVAL;
 
@@ -1116,7 +1116,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self)
 				+ (build % 10);
 
 			IRDA_DEBUG(3, "%s(): Firmware Product version %ld\n",
-                                   __FUNCTION__, fw_version);
+                                   __func__, fw_version);
                 }
         }
 
@@ -1172,7 +1172,7 @@ static int irda_usb_net_open(struct net_device *netdev)
 	char	hwname[16];
 	int i;
 	
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	IRDA_ASSERT(netdev != NULL, return -1;);
 	self = (struct irda_usb_cb *) netdev->priv;
@@ -1182,13 +1182,13 @@ static int irda_usb_net_open(struct net_device *netdev)
 	/* Can only open the device if it's there */
 	if(!self->present) {
 		spin_unlock_irqrestore(&self->lock, flags);
-		IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), device not present!\n", __func__);
 		return -1;
 	}
 
 	if(self->needspatch) {
 		spin_unlock_irqrestore(&self->lock, flags);
-		IRDA_WARNING("%s(), device needs patch\n", __FUNCTION__) ;
+		IRDA_WARNING("%s(), device needs patch\n", __func__) ;
 		return -EIO ;
 	}
 
@@ -1231,7 +1231,7 @@ static int irda_usb_net_open(struct net_device *netdev)
 			/* If this ever happen, we are in deep s***.
 			 * Basically, we can't start the Rx path... */
 			IRDA_WARNING("%s(), Failed to allocate Rx skb\n",
-				     __FUNCTION__);
+				     __func__);
 			return -1;
 		}
 		//skb_reserve(newskb, USB_IRDA_HEADER - 1);
@@ -1254,7 +1254,7 @@ static int irda_usb_net_close(struct net_device *netdev)
 	struct irda_usb_cb *self;
 	int	i;
 
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	IRDA_ASSERT(netdev != NULL, return -1;);
 	self = (struct irda_usb_cb *) netdev->priv;
@@ -1309,7 +1309,7 @@ static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	self = dev->priv;
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -1367,7 +1367,7 @@ static inline void irda_usb_init_qos(struct irda_usb_cb *self)
 {
 	struct irda_class_desc *desc;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 	
 	desc = self->irda_desc;
 	
@@ -1384,7 +1384,7 @@ static inline void irda_usb_init_qos(struct irda_usb_cb *self)
 	self->qos.data_size.bits       = desc->bmDataSize;
 
 	IRDA_DEBUG(0, "%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n", 
-		__FUNCTION__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
+		__func__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
 
 	/* Don't always trust what the dongle tell us */
 	if(self->capability & IUC_SIR_ONLY)
@@ -1419,7 +1419,7 @@ static inline int irda_usb_open(struct irda_usb_cb *self)
 {
 	struct net_device *netdev = self->netdev;
 
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	irda_usb_init_qos(self);
 
@@ -1442,7 +1442,7 @@ static inline int irda_usb_open(struct irda_usb_cb *self)
  */
 static inline void irda_usb_close(struct irda_usb_cb *self)
 {
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	/* Remove netdevice */
 	unregister_netdev(self->netdev);
@@ -1515,13 +1515,13 @@ static inline int irda_usb_parse_endpoints(struct irda_usb_cb *self, struct usb_
 				/* This is our interrupt endpoint */
 				self->bulk_int_ep = ep;
 			} else {
-				IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __FUNCTION__, ep);
+				IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __func__, ep);
 			}
 		}
 	}
 
 	IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
-		__FUNCTION__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
+		__func__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
 
 	return((self->bulk_in_ep != 0) && (self->bulk_out_ep != 0));
 }
@@ -1583,7 +1583,7 @@ static inline struct irda_class_desc *irda_usb_find_class_desc(struct usb_interf
 		0, intf->altsetting->desc.bInterfaceNumber, desc,
 		sizeof(*desc), 500);
 	
-	IRDA_DEBUG(1, "%s(), ret=%d\n", __FUNCTION__, ret);
+	IRDA_DEBUG(1, "%s(), ret=%d\n", __func__, ret);
 	if (ret < sizeof(*desc)) {
 		IRDA_WARNING("usb-irda: class_descriptor read %s (%d)\n",
 			     (ret<0) ? "failed" : "too short", ret);
@@ -1696,10 +1696,10 @@ static int irda_usb_probe(struct usb_interface *intf,
 			/* Martin Diehl says if we get a -EPIPE we should
 			 * be fine and we don't need to do a usb_clear_halt().
 			 * - Jean II */
-			IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __func__);
 			break;
 		default:
-			IRDA_DEBUG(0, "%s(), Unknown error %d\n", __FUNCTION__, ret);
+			IRDA_DEBUG(0, "%s(), Unknown error %d\n", __func__, ret);
 			ret = -EIO;
 			goto err_out_3;
 	}
@@ -1708,7 +1708,7 @@ static int irda_usb_probe(struct usb_interface *intf,
 	interface = intf->cur_altsetting;
 	if(!irda_usb_parse_endpoints(self, interface->endpoint,
 				     interface->desc.bNumEndpoints)) {
-		IRDA_ERROR("%s(), Bogus endpoints...\n", __FUNCTION__);
+		IRDA_ERROR("%s(), Bogus endpoints...\n", __func__);
 		ret = -EIO;
 		goto err_out_3;
 	}
@@ -1815,7 +1815,7 @@ static void irda_usb_disconnect(struct usb_interface *intf)
 	struct irda_usb_cb *self = usb_get_intfdata(intf);
 	int i;
 
-	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	usb_set_intfdata(intf, NULL);
 	if (!self)
@@ -1865,7 +1865,7 @@ static void irda_usb_disconnect(struct usb_interface *intf)
 
 	/* Free self and network device */
 	free_netdev(self->netdev);
-	IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __FUNCTION__);
+	IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __func__);
 }
 
 /*------------------------------------------------------------------*/
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 9e33196f945..6bcee01c684 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -231,7 +231,7 @@ static void irtty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 
 	dev = priv->dev;
 	if (!dev) {
-		IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), not ready yet!\n", __func__);
 		return;
 	}
 
@@ -388,7 +388,7 @@ static int irtty_ioctl(struct tty_struct *tty, struct file *file, unsigned int c
 	IRDA_ASSERT(priv != NULL, return -ENODEV;);
 	IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -EBADR;);
 
-	IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __FUNCTION__, cmd);
+	IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __func__, cmd);
 
 	dev = priv->dev;
 	IRDA_ASSERT(dev != NULL, return -1;);
@@ -476,7 +476,7 @@ static int irtty_open(struct tty_struct *tty)
 
 	mutex_unlock(&irtty_mutex);
 
-	IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __FUNCTION__, tty->name);
+	IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __func__, tty->name);
 
 	return 0;
 
@@ -528,7 +528,7 @@ static void irtty_close(struct tty_struct *tty)
 
 	kfree(priv);
 
-	IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __FUNCTION__, tty->name);
+	IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __func__, tty->name);
 }
 
 /* ------------------------------------------------------- */
@@ -566,7 +566,7 @@ static void __exit irtty_sir_cleanup(void)
 
 	if ((err = tty_unregister_ldisc(N_IRDA))) {
 		IRDA_ERROR("%s(), can't unregister line discipline (err = %d)\n",
-			   __FUNCTION__, err);
+			   __func__, err);
 	}
 }
 
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index 648e54b3f00..73fe83be34f 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -243,7 +243,7 @@ static void kingsun_rcv_irq(struct urb *urb)
 		}
 	} else if (urb->actual_length > 0) {
 		err("%s(): Unexpected response length, expected %d got %d",
-		    __FUNCTION__, kingsun->max_rx, urb->actual_length);
+		    __func__, kingsun->max_rx, urb->actual_length);
 	}
 	/* This urb has already been filled in kingsun_net_open */
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
diff --git a/drivers/net/irda/litelink-sir.c b/drivers/net/irda/litelink-sir.c
index 73261c54bbf..d6d9d2e5ad4 100644
--- a/drivers/net/irda/litelink-sir.c
+++ b/drivers/net/irda/litelink-sir.c
@@ -78,7 +78,7 @@ static int litelink_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power up dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -95,7 +95,7 @@ static int litelink_open(struct sir_dev *dev)
 
 static int litelink_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -113,7 +113,7 @@ static int litelink_change_speed(struct sir_dev *dev, unsigned speed)
 {
         int i;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* dongle already reset by irda-thread - current speed (dongle and
 	 * port) is the default speed (115200 for litelink!)
@@ -156,7 +156,7 @@ static int litelink_change_speed(struct sir_dev *dev, unsigned speed)
  */
 static int litelink_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* probably the power-up can be dropped here, but with only
 	 * 15 usec delay it's not worth the risk unless somebody with
diff --git a/drivers/net/irda/ma600-sir.c b/drivers/net/irda/ma600-sir.c
index 809906d9476..1ceed9cfb7c 100644
--- a/drivers/net/irda/ma600-sir.c
+++ b/drivers/net/irda/ma600-sir.c
@@ -67,13 +67,13 @@ static struct dongle_driver ma600 = {
 
 static int __init ma600_sir_init(void)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 	return irda_register_dongle(&ma600);
 }
 
 static void __exit ma600_sir_cleanup(void)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 	irda_unregister_dongle(&ma600);
 }
 
@@ -88,7 +88,7 @@ static int ma600_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
@@ -106,7 +106,7 @@ static int ma600_open(struct sir_dev *dev)
 
 static int ma600_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -176,7 +176,7 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
 {
 	u8	byte;
 	
-	IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __FUNCTION__,
+	IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __func__,
 		speed, dev->speed);
 
 	/* dongle already reset, dongle and port at default speed (9600) */
@@ -201,12 +201,12 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
 	sirdev_raw_read(dev, &byte, sizeof(byte));
 	if (byte != get_control_byte(speed))  {
 		IRDA_WARNING("%s(): bad control byte read-back %02x != %02x\n",
-			     __FUNCTION__, (unsigned) byte,
+			     __func__, (unsigned) byte,
 			     (unsigned) get_control_byte(speed));
 		return -1;
 	}
 	else
-		IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
+		IRDA_DEBUG(2, "%s() control byte write read OK\n", __func__);
 #endif
 
 	/* Set DTR, Set RTS */
@@ -238,7 +238,7 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
 
 int ma600_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Reset the dongle : set DTR low for 10 ms */
 	sirdev_set_dtr_rts(dev, FALSE, TRUE);
diff --git a/drivers/net/irda/mcp2120-sir.c b/drivers/net/irda/mcp2120-sir.c
index 67bd016e4df..5e2f4859cee 100644
--- a/drivers/net/irda/mcp2120-sir.c
+++ b/drivers/net/irda/mcp2120-sir.c
@@ -63,7 +63,7 @@ static int mcp2120_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* seems no explicit power-on required here and reset switching it on anyway */
 
@@ -76,7 +76,7 @@ static int mcp2120_open(struct sir_dev *dev)
 
 static int mcp2120_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
         /* reset and inhibit mcp2120 */
@@ -102,7 +102,7 @@ static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed)
 	u8 control[2];
 	static int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_SPEED:
@@ -155,7 +155,7 @@ static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed)
 		break;
 
 	default:
-		IRDA_ERROR("%s(), undefine state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s(), undefine state %d\n", __func__, state);
 		ret = -EINVAL;
 		break;
 	}
@@ -187,7 +187,7 @@ static int mcp2120_reset(struct sir_dev *dev)
 	unsigned delay = 0;
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_RESET:
@@ -213,7 +213,7 @@ static int mcp2120_reset(struct sir_dev *dev)
 		break;
 
 	default:
-		IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s(), undefined state %d\n", __func__, state);
 		ret = -EINVAL;
 		break;
 	}
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index effc1ce8179..8583d951a6a 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -151,8 +151,8 @@ static char *dongle_types[] = {
 static chipio_t pnp_info;
 static const struct pnp_device_id nsc_ircc_pnp_table[] = {
 	{ .id = "NSC6001", .driver_data = 0 },
-	{ .id = "IBM0071", .driver_data = 0 },
 	{ .id = "HWPC224", .driver_data = 0 },
+	{ .id = "IBM0071", .driver_data = NSC_FORCE_DONGLE_TYPE9 },
 	{ }
 };
 
@@ -223,7 +223,7 @@ static int __init nsc_ircc_init(void)
 
 	/* Probe for all the NSC chipsets we know about */
 	for (chip = chips; chip->name ; chip++) {
-		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
+		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__,
 			   chip->name);
 		
 		/* Try all config registers for this chip */
@@ -235,7 +235,7 @@ static int __init nsc_ircc_init(void)
 			/* Read index register */
 			reg = inb(cfg_base);
 			if (reg == 0xff) {
-				IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base);
+				IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __func__, cfg_base);
 				continue;
 			}
 			
@@ -244,7 +244,7 @@ static int __init nsc_ircc_init(void)
 			id = inb(cfg_base+1);
 			if ((id & chip->cid_mask) == chip->cid_value) {
 				IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
-					   __FUNCTION__, chip->name, id & ~chip->cid_mask);
+					   __func__, chip->name, id & ~chip->cid_mask);
 
 				/*
 				 * If we found a correct PnP setting,
@@ -295,7 +295,7 @@ static int __init nsc_ircc_init(void)
 				}
 				i++;
 			} else {
-				IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
+				IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __func__, id);
 			}
 		} 
 	}
@@ -345,7 +345,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	void *ret;
 	int err, chip_index;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 
  	for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
@@ -354,7 +354,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	}
 
 	if (chip_index == ARRAY_SIZE(dev_self)) {
-		IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -369,7 +369,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
 	if (dev == NULL) {
 		IRDA_ERROR("%s(), can't allocate memory for "
-			   "control block!\n", __FUNCTION__);
+			   "control block!\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -393,7 +393,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
 	if (!ret) {
 		IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
-			     __FUNCTION__, self->io.fir_base);
+			     __func__, self->io.fir_base);
 		err = -ENODEV;
 		goto out1;
 	}
@@ -450,7 +450,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 
 	err = register_netdev(dev);
 	if (err) {
-		IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
 		goto out4;
 	}
 	IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
@@ -506,7 +506,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
@@ -519,7 +519,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 
 	/* Release the PORT that this driver is using */
 	IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", 
-		   __FUNCTION__, self->io.fir_base);
+		   __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -557,7 +557,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 	case 0x2e8: outb(0x15, cfg_base+1); break;
 	case 0x3f8: outb(0x16, cfg_base+1); break;
 	case 0x2f8: outb(0x17, cfg_base+1); break;
-	default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__);
+	default: IRDA_ERROR("%s(), invalid base_address", __func__);
 	}
 	
 	/* Control Signal Routing Register (CSRT) */
@@ -569,7 +569,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 	case 9:  temp = 0x05; break;
 	case 11: temp = 0x06; break;
 	case 15: temp = 0x07; break;
-	default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__);
+	default: IRDA_ERROR("%s(), invalid irq", __func__);
 	}
 	outb(CFG_108_CSRT, cfg_base);
 	
@@ -577,7 +577,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 	case 0: outb(0x08+temp, cfg_base+1); break;
 	case 1: outb(0x10+temp, cfg_base+1); break;
 	case 3: outb(0x18+temp, cfg_base+1); break;
-	default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__);
+	default: IRDA_ERROR("%s(), invalid dma", __func__);
 	}
 	
 	outb(CFG_108_MCTL, cfg_base);      /* Mode Control Register (MCTL) */
@@ -616,7 +616,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 		break;
 	}
 	info->sir_base = info->fir_base;
-	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__,
+	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__,
 		   info->fir_base);
 
 	/* Read control signals routing register (CSRT) */
@@ -649,7 +649,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 		info->irq = 15;
 		break;
 	}
-	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
 
 	/* Currently we only read Rx DMA but it will also be used for Tx */
 	switch ((reg >> 3) & 0x03) {
@@ -666,7 +666,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 		info->dma = 3;
 		break;
 	}
-	IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+	IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
 
 	/* Read mode control register (MCTL) */
 	outb(CFG_108_MCTL, cfg_base);
@@ -823,7 +823,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
 	/* User is sure about his config... accept it. */
 	IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
 		   "io=0x%04x, irq=%d, dma=%d\n", 
-		   __FUNCTION__, info->fir_base, info->irq, info->dma);
+		   __func__, info->fir_base, info->irq, info->dma);
 
 	/* Access bank for SP2 */
 	outb(CFG_39X_LDN, cfg_base);
@@ -864,7 +864,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
 	int enabled, susp;
 
 	IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
-		   __FUNCTION__, cfg_base);
+		   __func__, cfg_base);
 
 	/* This function should be executed with irq off to avoid
 	 * another driver messing with the Super I/O bank - Jean II */
@@ -898,7 +898,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
 	outb(CFG_39X_SPC, cfg_base);
 	susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
 
-	IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
+	IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __func__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
 
 	/* Configure SP2 */
 
@@ -930,7 +930,10 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i
 	pnp_info.dma = -1;
 	pnp_succeeded = 1;
 
-	/* There don't seem to be any way to get the cfg_base.
+	if (id->driver_data & NSC_FORCE_DONGLE_TYPE9)
+		dongle_id = 0x9;
+
+	/* There doesn't seem to be any way of getting the cfg_base.
 	 * On my box, cfg_base is in the PnP descriptor of the
 	 * motherboard. Oh well... Jean II */
 
@@ -947,7 +950,7 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i
 		pnp_info.dma = pnp_dma(dev, 0);
 
 	IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
-		   __FUNCTION__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
+		   __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
 
 	if((pnp_info.fir_base == 0) ||
 	   (pnp_info.irq == -1) || (pnp_info.dma == -1)) {
@@ -976,7 +979,7 @@ static int nsc_ircc_setup(chipio_t *info)
 	version = inb(iobase+MID);
 
 	IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
-		   __FUNCTION__, driver_name, version);
+		   __func__, driver_name, version);
 
 	/* Should be 0x2? */
 	if (0x20 != (version & 0xf0)) {
@@ -1080,30 +1083,30 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
 	case 0x00: /* same as */
 	case 0x01: /* Differential serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x02: /* same as */
 	case 0x03: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x04: /* Sharp RY5HD01 */
 		break;
 	case 0x05: /* Reserved, but this is what the Thinkpad reports */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x06: /* Single-ended serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x07: /* Consumer-IR only */
 		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
 		IRDA_DEBUG(0, "%s(), %s\n",
-			   __FUNCTION__, dongle_types[dongle_id]);
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
 		outb(0x28, iobase+7); /* Set irsl[0-2] as output */
@@ -1111,7 +1114,7 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
 	case 0x0A: /* same as */
 	case 0x0B: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x0C: /* same as */
 	case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1126,14 +1129,14 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
 		break;
 	case 0x0F: /* No dongle connected */
 		IRDA_DEBUG(0, "%s(), %s\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 
 		switch_bank(iobase, BANK0);
 		outb(0x62, iobase+MCR);
 		break;
 	default: 
 		IRDA_DEBUG(0, "%s(), invalid dongle_id %#x", 
-			   __FUNCTION__, dongle_id);
+			   __func__, dongle_id);
 	}
 	
 	/* IRCFG1: IRSL1 and 2 are set to IrDA mode */
@@ -1165,30 +1168,30 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
 	case 0x00: /* same as */
 	case 0x01: /* Differential serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x02: /* same as */
 	case 0x03: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x04: /* Sharp RY5HD01 */
 		break;
 	case 0x05: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x06: /* Single-ended serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x07: /* Consumer-IR only */
 		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
 		IRDA_DEBUG(0, "%s(), %s\n", 
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		outb(0x00, iobase+4);
 		if (speed > 115200)
 			outb(0x01, iobase+4);
@@ -1207,7 +1210,7 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
 	case 0x0A: /* same as */
 	case 0x0B: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x0C: /* same as */
 	case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1216,13 +1219,13 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
 		break;
 	case 0x0F: /* No dongle connected */
 		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __FUNCTION__, dongle_types[dongle_id]);
+			   __func__, dongle_types[dongle_id]);
 
 		switch_bank(iobase, BANK0); 
 		outb(0x62, iobase+MCR);
 		break;
 	default: 
-		IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), invalid data_rate\n", __func__);
 	}
 	/* Restore bank register */
 	outb(bank, iobase+BSR);
@@ -1243,7 +1246,7 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
 	__u8 bank;
 	__u8 ier;                  /* Interrupt enable register */
 
-	IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed);
+	IRDA_DEBUG(2, "%s(), speed=%d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return 0;);
 
@@ -1276,20 +1279,20 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
 		outb(inb(iobase+4) | 0x04, iobase+4);
 	       
 		mcr = MCR_MIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
 		break;
 	case 1152000:
 		mcr = MCR_MIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__);
 		break;
 	case 4000000:
 		mcr = MCR_FIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__);
 		break;
 	default:
 		mcr = MCR_FIR;
 		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", 
-			   __FUNCTION__, speed);
+			   __func__, speed);
 		break;
 	}
 
@@ -1594,7 +1597,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	int actual = 0;
 	__u8 bank;
 	
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 
 	/* Save current bank */
 	bank = inb(iobase+BSR);
@@ -1602,7 +1605,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	switch_bank(iobase, BANK0);
 	if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
 		IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
-			   __FUNCTION__);
+			   __func__);
 
 		/* FIFO may still be filled to the Tx interrupt threshold */
 		fifo_size -= 17;
@@ -1615,7 +1618,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	}
         
 	IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
-		   __FUNCTION__, fifo_size, actual, len);
+		   __func__, fifo_size, actual, len);
 	
 	/* Restore bank */
 	outb(bank, iobase+BSR);
@@ -1636,7 +1639,7 @@ static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
 	__u8 bank;
 	int ret = TRUE;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	iobase = self->io.fir_base;
 
@@ -1767,7 +1770,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
 		len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
 
 		if (st_fifo->tail >= MAX_RX_WINDOW) {
-			IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s(), window is full!\n", __func__);
 			continue;
 		}
 			
@@ -1859,7 +1862,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
 			if (skb == NULL)  {
 				IRDA_WARNING("%s(), memory squeeze, "
 					     "dropping frame.\n",
-					     __FUNCTION__);
+					     __func__);
 				self->stats.rx_dropped++;
 
 				/* Restore bank register */
@@ -1965,7 +1968,7 @@ static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
 		 * Need to be after self->io.direction to avoid race with
 		 * nsc_ircc_hard_xmit_sir() - Jean II */
 		if (self->new_speed) {
-			IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__);
+			IRDA_DEBUG(2, "%s(), Changing speed!\n", __func__);
 			self->ier = nsc_ircc_change_speed(self,
 							  self->new_speed);
 			self->new_speed = 0;
@@ -2051,7 +2054,7 @@ static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase,
 				} else
 					IRDA_WARNING("%s(), potential "
 						     "Tx queue lockup !\n",
-						     __FUNCTION__);
+						     __func__);
 			}
 		} else {
 			/*  Not finished yet, so interrupt on DMA again */
@@ -2160,7 +2163,7 @@ static int nsc_ircc_net_open(struct net_device *dev)
 	char hwname[32];
 	__u8 bank;
 	
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = (struct nsc_ircc_cb *) dev->priv;
@@ -2222,7 +2225,7 @@ static int nsc_ircc_net_close(struct net_device *dev)
 	int iobase;
 	__u8 bank;
 
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -2276,7 +2279,7 @@ static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 	
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index 29398a4f73f..71cd3c5a076 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -35,6 +35,9 @@
 #include <linux/types.h>
 #include <asm/io.h>
 
+/* Features for chips (set in driver_data) */
+#define NSC_FORCE_DONGLE_TYPE9	0x00000001
+
 /* DMA modes needed */
 #define DMA_TX_MODE     0x08    /* Mem to I/O, ++, demand. */
 #define DMA_RX_MODE     0x04    /* I/O to mem, ++, demand. */
diff --git a/drivers/net/irda/old_belkin-sir.c b/drivers/net/irda/old_belkin-sir.c
index 8c22c7374a2..75714bc7103 100644
--- a/drivers/net/irda/old_belkin-sir.c
+++ b/drivers/net/irda/old_belkin-sir.c
@@ -92,7 +92,7 @@ static int old_belkin_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power on dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -110,7 +110,7 @@ static int old_belkin_open(struct sir_dev *dev)
 
 static int old_belkin_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -125,7 +125,7 @@ static int old_belkin_close(struct sir_dev *dev)
  */
 static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	dev->speed = 9600;
 	return (speed==dev->speed) ? 0 : -EINVAL;
@@ -139,7 +139,7 @@ static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
  */
 static int old_belkin_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* This dongles speed "defaults" to 9600 bps ;-) */
 	dev->speed = 9600;
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index f76b0b6c277..4aa61a1a3d5 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -23,8 +23,8 @@
 #include <net/irda/irda_device.h>
 
 #include <asm/dma.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/irda.h>
+#include <mach/pxa-regs.h>
 
 #define IrSR_RXPL_NEG_IS_ZERO (1<<4)
 #define IrSR_RXPL_POS_IS_ZERO 0x0
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 1bc8518f919..a95188948de 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -37,7 +37,7 @@
 
 #include <asm/irq.h>
 #include <asm/dma.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irda.h>
 
 static int power_level = 3;
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index 6078e03de9a..3f32909c24c 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -80,7 +80,7 @@ static int sirdev_tx_complete_fsm(struct sir_dev *dev)
 			return 0;
 
 		default:
-			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+			IRDA_ERROR("%s - undefined state\n", __func__);
 			return -EINVAL;
 		}
 		fsm->substate = next_state;
@@ -107,11 +107,11 @@ static void sirdev_config_fsm(struct work_struct *work)
 	int ret = -1;
 	unsigned delay;
 
-	IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
+	IRDA_DEBUG(2, "%s(), <%ld>\n", __func__, jiffies);
 
 	do {
 		IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
-			__FUNCTION__, fsm->state, fsm->substate);
+			__func__, fsm->state, fsm->substate);
 
 		next_state = fsm->state;
 		delay = 0;
@@ -249,12 +249,12 @@ static void sirdev_config_fsm(struct work_struct *work)
 			break;
 
 		default:
-			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+			IRDA_ERROR("%s - undefined state\n", __func__);
 			fsm->result = -EINVAL;
 			/* fall thru */
 
 		case SIRDEV_STATE_ERROR:
-			IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
+			IRDA_ERROR("%s - error: %d\n", __func__, fsm->result);
 
 #if 0	/* don't enable this before we have netdev->tx_timeout to recover */
 			netif_stop_queue(dev->netdev);
@@ -284,11 +284,12 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par
 {
 	struct sir_fsm *fsm = &dev->fsm;
 
-	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
+	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __func__,
+			initial_state, param);
 
 	if (down_trylock(&fsm->sem)) {
 		if (in_interrupt()  ||  in_atomic()  ||  irqs_disabled()) {
-			IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
+			IRDA_DEBUG(1, "%s(), state machine busy!\n", __func__);
 			return -EWOULDBLOCK;
 		} else
 			down(&fsm->sem);
@@ -296,7 +297,7 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par
 
 	if (fsm->state == SIRDEV_STATE_DEAD) {
 		/* race with sirdev_close should never happen */
-		IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), instance staled!\n", __func__);
 		up(&fsm->sem);
 		return -ESTALE;		/* or better EPIPE? */
 	}
@@ -341,7 +342,7 @@ int sirdev_set_dongle(struct sir_dev *dev, IRDA_DONGLE type)
 {
 	int err;
 
-	IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __FUNCTION__, type);
+	IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __func__, type);
 
 	err = sirdev_schedule_dongle_open(dev, type);
 	if (unlikely(err))
@@ -376,7 +377,7 @@ int sirdev_raw_write(struct sir_dev *dev, const char *buf, int len)
 
 	ret = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
 	if (ret > 0) {
-		IRDA_DEBUG(3, "%s(), raw-tx started\n", __FUNCTION__);
+		IRDA_DEBUG(3, "%s(), raw-tx started\n", __func__);
 
 		dev->tx_buff.data += ret;
 		dev->tx_buff.len -= ret;
@@ -437,7 +438,7 @@ void sirdev_write_complete(struct sir_dev *dev)
 	spin_lock_irqsave(&dev->tx_lock, flags);
 
 	IRDA_DEBUG(3, "%s() - dev->tx_buff.len = %d\n",
-		   __FUNCTION__, dev->tx_buff.len);
+		   __func__, dev->tx_buff.len);
 
 	if (likely(dev->tx_buff.len > 0))  {
 		/* Write data left in transmit buffer */
@@ -450,7 +451,7 @@ void sirdev_write_complete(struct sir_dev *dev)
 		else if (unlikely(actual<0)) {
 			/* could be dropped later when we have tx_timeout to recover */
 			IRDA_ERROR("%s: drv->do_write failed (%d)\n",
-				   __FUNCTION__, actual);
+				   __func__, actual);
 			if ((skb=dev->tx_skb) != NULL) {
 				dev->tx_skb = NULL;
 				dev_kfree_skb_any(skb);
@@ -471,7 +472,7 @@ void sirdev_write_complete(struct sir_dev *dev)
 		 * restarted when the irda-thread has completed the request.
 		 */
 
-		IRDA_DEBUG(3, "%s(), raw-tx done\n", __FUNCTION__);
+		IRDA_DEBUG(3, "%s(), raw-tx done\n", __func__);
 		dev->raw_tx = 0;
 		goto done;	/* no post-frame handling in raw mode */
 	}
@@ -488,7 +489,7 @@ void sirdev_write_complete(struct sir_dev *dev)
 	 * re-activated.
 	 */
 
-	IRDA_DEBUG(5, "%s(), finished with frame!\n", __FUNCTION__);
+	IRDA_DEBUG(5, "%s(), finished with frame!\n", __func__);
 		
 	if ((skb=dev->tx_skb) != NULL) {
 		dev->tx_skb = NULL;
@@ -498,14 +499,14 @@ void sirdev_write_complete(struct sir_dev *dev)
 	}
 
 	if (unlikely(dev->new_speed > 0)) {
-		IRDA_DEBUG(5, "%s(), Changing speed!\n", __FUNCTION__);
+		IRDA_DEBUG(5, "%s(), Changing speed!\n", __func__);
 		err = sirdev_schedule_speed(dev, dev->new_speed);
 		if (unlikely(err)) {
 			/* should never happen
 			 * forget the speed change and hope the stack recovers
 			 */
 			IRDA_ERROR("%s - schedule speed change failed: %d\n",
-				   __FUNCTION__, err);
+				   __func__, err);
 			netif_wake_queue(dev->netdev);
 		}
 		/* else: success
@@ -532,13 +533,13 @@ EXPORT_SYMBOL(sirdev_write_complete);
 int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count) 
 {
 	if (!dev || !dev->netdev) {
-		IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), not ready yet!\n", __func__);
 		return -1;
 	}
 
 	if (!dev->irlap) {
 		IRDA_WARNING("%s - too early: %p / %zd!\n",
-			     __FUNCTION__, cp, count);
+			     __func__, cp, count);
 		return -1;
 	}
 
@@ -548,7 +549,7 @@ int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count)
 		 */
 		irda_device_set_media_busy(dev->netdev, TRUE);
 		dev->stats.rx_dropped++;
-		IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __FUNCTION__, count);
+		IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __func__, count);
 		return 0;
 	}
 
@@ -600,7 +601,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	netif_stop_queue(ndev);
 
-	IRDA_DEBUG(3, "%s(), skb->len = %d\n", __FUNCTION__, skb->len);
+	IRDA_DEBUG(3, "%s(), skb->len = %d\n", __func__, skb->len);
 
 	speed = irda_get_next_speed(skb);
 	if ((speed != dev->speed) && (speed != -1)) {
@@ -637,7 +638,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	/* Check problems */
 	if(spin_is_locked(&dev->tx_lock)) {
-		IRDA_DEBUG(3, "%s(), write not completed\n", __FUNCTION__);
+		IRDA_DEBUG(3, "%s(), write not completed\n", __func__);
 	}
 
 	/* serialize with write completion */
@@ -666,7 +667,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 	else if (unlikely(actual < 0)) {
 		/* could be dropped later when we have tx_timeout to recover */
 		IRDA_ERROR("%s: drv->do_write failed (%d)\n",
-			   __FUNCTION__, actual);
+			   __func__, actual);
 		dev_kfree_skb_any(skb);
 		dev->stats.tx_errors++;		      
 		dev->stats.tx_dropped++;		      
@@ -687,7 +688,7 @@ static int sirdev_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 
-	IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, ndev->name, cmd);
+	IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __func__, ndev->name, cmd);
 	
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -804,7 +805,7 @@ static int sirdev_open(struct net_device *ndev)
 	if (!try_module_get(drv->owner))
 		return -ESTALE;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	if (sirdev_alloc_buffers(dev))
 		goto errout_dec;
@@ -822,7 +823,7 @@ static int sirdev_open(struct net_device *ndev)
 
 	netif_wake_queue(ndev);
 
-	IRDA_DEBUG(2, "%s - done, speed = %d\n", __FUNCTION__, dev->speed);
+	IRDA_DEBUG(2, "%s - done, speed = %d\n", __func__, dev->speed);
 
 	return 0;
 
@@ -842,7 +843,7 @@ static int sirdev_close(struct net_device *ndev)
 	struct sir_dev *dev = ndev->priv;
 	const struct sir_driver *drv;
 
-//	IRDA_DEBUG(0, "%s\n", __FUNCTION__);
+//	IRDA_DEBUG(0, "%s\n", __func__);
 
 	netif_stop_queue(ndev);
 
@@ -878,7 +879,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
 	struct net_device *ndev;
 	struct sir_dev *dev;
 
-	IRDA_DEBUG(0, "%s - %s\n", __FUNCTION__, name);
+	IRDA_DEBUG(0, "%s - %s\n", __func__, name);
 
 	/* instead of adding tests to protect against drv->do_write==NULL
 	 * at several places we refuse to create a sir_dev instance for
@@ -892,7 +893,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
 	 */
 	ndev = alloc_irdadev(sizeof(*dev));
 	if (ndev == NULL) {
-		IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __FUNCTION__);
+		IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __func__);
 		goto out;
 	}
 	dev = ndev->priv;
@@ -921,7 +922,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
 	ndev->do_ioctl = sirdev_ioctl;
 
 	if (register_netdev(ndev)) {
-		IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
 		goto out_freenetdev;
 	}
 
@@ -938,7 +939,7 @@ int sirdev_put_instance(struct sir_dev *dev)
 {
 	int err = 0;
 
-	IRDA_DEBUG(0, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(0, "%s\n", __func__);
 
 	atomic_set(&dev->enable_rx, 0);
 
@@ -948,7 +949,7 @@ int sirdev_put_instance(struct sir_dev *dev)
 	if (dev->dongle_drv)
 		err = sirdev_schedule_dongle_close(dev);
 	if (err)
-		IRDA_ERROR("%s - error %d\n", __FUNCTION__, err);
+		IRDA_ERROR("%s - error %d\n", __func__, err);
 
 	sirdev_close(dev->netdev);
 
diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c
index 25d5b8a96bd..36030241f7a 100644
--- a/drivers/net/irda/sir_dongle.c
+++ b/drivers/net/irda/sir_dongle.c
@@ -36,7 +36,7 @@ int irda_register_dongle(struct dongle_driver *new)
 	struct dongle_driver *drv;
 
 	IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n",
-		   __FUNCTION__, new->driver_name, new->type);
+		   __func__, new->driver_name, new->type);
 
 	mutex_lock(&dongle_list_lock);
 	list_for_each(entry, &dongle_list) {
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 78dc8e7837f..b5360fe99d3 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -460,7 +460,7 @@ static int __init smsc_ircc_init(void)
 {
 	int ret;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	ret = platform_driver_register(&smsc_ircc_driver);
 	if (ret) {
@@ -500,7 +500,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u
 	struct net_device *dev;
 	int err;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	err = smsc_ircc_present(fir_base, sir_base);
 	if (err)
@@ -508,7 +508,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u
 
 	err = -ENOMEM;
 	if (dev_count >= ARRAY_SIZE(dev_self)) {
-	        IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__);
+	        IRDA_WARNING("%s(), too many devices!\n", __func__);
 		goto err_out1;
 	}
 
@@ -517,7 +517,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u
 	 */
 	dev = alloc_irdadev(sizeof(struct smsc_ircc_cb));
 	if (!dev) {
-		IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__);
+		IRDA_WARNING("%s() can't allocate net device\n", __func__);
 		goto err_out1;
 	}
 
@@ -633,14 +633,14 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
 	if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT,
 			    driver_name)) {
 		IRDA_WARNING("%s: can't get fir_base of 0x%03x\n",
-			     __FUNCTION__, fir_base);
+			     __func__, fir_base);
 		goto out1;
 	}
 
 	if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT,
 			    driver_name)) {
 		IRDA_WARNING("%s: can't get sir_base of 0x%03x\n",
-			     __FUNCTION__, sir_base);
+			     __func__, sir_base);
 		goto out2;
 	}
 
@@ -656,7 +656,7 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
 
 	if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
 		IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
-			     __FUNCTION__, fir_base);
+			     __func__, fir_base);
 		goto out3;
 	}
 	IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, "
@@ -793,7 +793,7 @@ static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -878,7 +878,7 @@ int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
 	unsigned long flags;
 	s32 speed;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return 0;);
 
@@ -953,21 +953,21 @@ static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed)
 		ir_mode = IRCC_CFGA_IRDA_HDLC;
 		ctrl = IRCC_CRC;
 		fast = 0;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
 		break;
 	case 1152000:
 		ir_mode = IRCC_CFGA_IRDA_HDLC;
 		ctrl = IRCC_1152 | IRCC_CRC;
 		fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
 		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
-			   __FUNCTION__);
+			   __func__);
 		break;
 	case 4000000:
 		ir_mode = IRCC_CFGA_IRDA_4PPM;
 		ctrl = IRCC_CRC;
 		fast = IRCC_LCR_A_FAST;
 		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
-			   __FUNCTION__);
+			   __func__);
 		break;
 	}
 	#if 0
@@ -995,7 +995,7 @@ static void smsc_ircc_fir_start(struct smsc_ircc_cb *self)
 	struct net_device *dev;
 	int fir_base;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return;);
 	dev = self->netdev;
@@ -1043,7 +1043,7 @@ static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self)
 {
 	int fir_base;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return;);
 
@@ -1067,7 +1067,7 @@ static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed)
 	struct net_device *dev;
 	int last_speed_was_sir;
 
-	IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed);
+	IRDA_DEBUG(0, "%s() changing speed to: %d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return;);
 	dev = self->netdev;
@@ -1135,7 +1135,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
 	int lcr;    /* Line control reg */
 	int divisor;
 
-	IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed);
+	IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return;);
 	iobase = self->io.sir_base;
@@ -1170,7 +1170,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
 	/* Turn on interrups */
 	outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 
-	IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
+	IRDA_DEBUG(2, "%s() speed changed to: %d\n", __func__, speed);
 }
 
 
@@ -1253,7 +1253,7 @@ static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs)
 	int iobase = self->io.fir_base;
 	u8 ctrl;
 
-	IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s\n", __func__);
 #if 1
 	/* Disable Rx */
 	register_bank(iobase, 0);
@@ -1307,7 +1307,7 @@ static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self)
 {
 	int iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s\n", __func__);
 #if 0
 	/* Disable Tx */
 	register_bank(iobase, 0);
@@ -1411,7 +1411,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
 
 	register_bank(iobase, 0);
 
-	IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s\n", __func__);
 #if 0
 	/* Disable Rx */
 	register_bank(iobase, 0);
@@ -1422,7 +1422,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
 	lsr= inb(iobase + IRCC_LSR);
 	msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
 
-	IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__,
+	IRDA_DEBUG(2, "%s: dma count = %d\n", __func__,
 		   get_dma_residue(self->io.dma));
 
 	len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
@@ -1445,15 +1445,15 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
 	len -= self->io.speed < 4000000 ? 2 : 4;
 
 	if (len < 2 || len > 2050) {
-		IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len);
+		IRDA_WARNING("%s(), bogus len=%d\n", __func__, len);
 		return;
 	}
-	IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len);
+	IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len);
 
 	skb = dev_alloc_skb(len + 1);
 	if (!skb) {
 		IRDA_WARNING("%s(), memory squeeze, dropping frame.\n",
-			     __FUNCTION__);
+			     __func__);
 		return;
 	}
 	/* Make sure IP header gets aligned */
@@ -1494,7 +1494,7 @@ static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self)
 
 		/* Make sure we don't stay here to long */
 		if (boguscount++ > 32) {
-			IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__);
+			IRDA_DEBUG(2, "%s(), breaking!\n", __func__);
 			break;
 		}
 	} while (inb(iobase + UART_LSR) & UART_LSR_DR);
@@ -1536,7 +1536,7 @@ static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id)
 	lcra = inb(iobase + IRCC_LCR_A);
 	lsr = inb(iobase + IRCC_LSR);
 
-	IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir);
+	IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __func__, iir);
 
 	if (iir & IRCC_IIR_EOM) {
 		if (self->io.direction == IO_RECV)
@@ -1548,7 +1548,7 @@ static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id)
 	}
 
 	if (iir & IRCC_IIR_ACTIVE_FRAME) {
-		/*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/
+		/*printk(KERN_WARNING "%s(): Active Frame\n", __func__);*/
 	}
 
 	/* Enable interrupts again */
@@ -1587,11 +1587,11 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
 		lsr = inb(iobase + UART_LSR);
 
 		IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
-			    __FUNCTION__, iir, lsr, iobase);
+			    __func__, iir, lsr, iobase);
 
 		switch (iir) {
 		case UART_IIR_RLSI:
-			IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
+			IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
 			break;
 		case UART_IIR_RDI:
 			/* Receive interrupt */
@@ -1604,7 +1604,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
 			break;
 		default:
 			IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
-				   __FUNCTION__, iir);
+				   __func__, iir);
 			break;
 		}
 
@@ -1631,11 +1631,11 @@ static int ircc_is_receiving(struct smsc_ircc_cb *self)
 	int status = FALSE;
 	/* int iobase; */
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return FALSE;);
 
-	IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__,
+	IRDA_DEBUG(0, "%s: dma count = %d\n", __func__,
 		   get_dma_residue(self->io.dma));
 
 	status = (self->rx_buff.state != OUTSIDE_FRAME);
@@ -1652,7 +1652,7 @@ static int smsc_ircc_request_irq(struct smsc_ircc_cb *self)
 			    self->netdev->name, self->netdev);
 	if (error)
 		IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
-			   __FUNCTION__, self->io.irq, error);
+			   __func__, self->io.irq, error);
 
 	return error;
 }
@@ -1696,21 +1696,21 @@ static int smsc_ircc_net_open(struct net_device *dev)
 	struct smsc_ircc_cb *self;
 	char hwname[16];
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
 	IRDA_ASSERT(self != NULL, return 0;);
 
 	if (self->io.suspended) {
-		IRDA_DEBUG(0, "%s(), device is suspended\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), device is suspended\n", __func__);
 		return -EAGAIN;
 	}
 
 	if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
 			(void *) dev)) {
 		IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
-			   __FUNCTION__, self->io.irq);
+			   __func__, self->io.irq);
 		return -EAGAIN;
 	}
 
@@ -1734,7 +1734,7 @@ static int smsc_ircc_net_open(struct net_device *dev)
 		smsc_ircc_net_close(dev);
 
 		IRDA_WARNING("%s(), unable to allocate DMA=%d\n",
-			     __FUNCTION__, self->io.dma);
+			     __func__, self->io.dma);
 		return -EAGAIN;
 	}
 
@@ -1753,7 +1753,7 @@ static int smsc_ircc_net_close(struct net_device *dev)
 {
 	struct smsc_ircc_cb *self;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
@@ -1836,7 +1836,7 @@ static int smsc_ircc_resume(struct platform_device *dev)
  */
 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
 {
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
@@ -1848,12 +1848,12 @@ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
 	smsc_ircc_stop_interrupts(self);
 
 	/* Release the PORTS that this driver is using */
-	IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __FUNCTION__,
+	IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __func__,
 		   self->io.fir_base);
 
 	release_region(self->io.fir_base, self->io.fir_ext);
 
-	IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__,
+	IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__,
 		   self->io.sir_base);
 
 	release_region(self->io.sir_base, self->io.sir_ext);
@@ -1875,7 +1875,7 @@ static void __exit smsc_ircc_cleanup(void)
 {
 	int i;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	for (i = 0; i < 2; i++) {
 		if (dev_self[i])
@@ -1899,7 +1899,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
 	struct net_device *dev;
 	int fir_base, sir_base;
 
-	IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return;);
 	dev = self->netdev;
@@ -1926,7 +1926,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
 	/* Turn on interrups */
 	outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
 
-	IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s() - exit\n", __func__);
 
 	outb(0x00, fir_base + IRCC_MASTER);
 }
@@ -1936,7 +1936,7 @@ void smsc_ircc_sir_stop(struct smsc_ircc_cb *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s\n", __func__);
 	iobase = self->io.sir_base;
 
 	/* Reset UART */
@@ -1962,7 +1962,7 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
 
 	IRDA_ASSERT(self != NULL, return;);
 
-	IRDA_DEBUG(4, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s\n", __func__);
 
 	iobase = self->io.sir_base;
 
@@ -1984,7 +1984,7 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
 		 */
 		if (self->new_speed) {
 			IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
-				   __FUNCTION__, self->new_speed);
+				   __func__, self->new_speed);
 			smsc_ircc_sir_wait_hw_transmitter_finish(self);
 			smsc_ircc_change_speed(self, self->new_speed);
 			self->new_speed = 0;
@@ -2023,7 +2023,7 @@ static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
 
 	/* Tx FIFO should be empty! */
 	if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) {
-		IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__);
+		IRDA_WARNING("%s(), failed, fifo not empty!\n", __func__);
 		return 0;
 	}
 
@@ -2123,7 +2123,7 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
 		udelay(1);
 
 	if (count == 0)
-		IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__);
 }
 
 
@@ -2145,7 +2145,7 @@ static int __init smsc_ircc_look_for_chips(void)
 	while (address->cfg_base) {
 		cfg_base = address->cfg_base;
 
-		/*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/
+		/*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __func__, cfg_base, address->type);*/
 
 		if (address->type & SMSCSIO_TYPE_FDC) {
 			type = "FDC";
@@ -2184,7 +2184,7 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor
 	u8 mode, dma, irq;
 	int ret = -ENODEV;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
 		return ret;
@@ -2192,10 +2192,10 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor
 	outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
 	mode = inb(cfgbase + 1);
 
-	/*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/
+	/*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __func__, mode);*/
 
 	if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
-		IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__);
+		IRDA_WARNING("%s(): IrDA not enabled\n", __func__);
 
 	outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
 	sirbase = inb(cfgbase + 1) << 2;
@@ -2212,7 +2212,7 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor
 	outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
 	irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
 
-	IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode);
+	IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __func__, firbase, sirbase, dma, irq, mode);
 
 	if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
 		ret = 0;
@@ -2234,7 +2234,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho
 	unsigned short fir_io, sir_io;
 	int ret = -ENODEV;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
 		return ret;
@@ -2268,7 +2268,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho
 
 static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
 {
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	outb(reg, cfg_base);
 	return inb(cfg_base) != reg ? -1 : 0;
@@ -2278,7 +2278,7 @@ static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base,
 {
 	u8 devid, xdevid, rev;
 
-	IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+	IRDA_DEBUG(1, "%s\n", __func__);
 
 	/* Leave configuration */
 
@@ -2353,7 +2353,7 @@ static int __init smsc_superio_fdc(unsigned short cfg_base)
 
 	if (!request_region(cfg_base, 2, driver_name)) {
 		IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
-			     __FUNCTION__, cfg_base);
+			     __func__, cfg_base);
 	} else {
 		if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") ||
 		    !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC"))
@@ -2371,7 +2371,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
 
 	if (!request_region(cfg_base, 2, driver_name)) {
 		IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
-			     __FUNCTION__, cfg_base);
+			     __func__, cfg_base);
 	} else {
 		if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") ||
 		    !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC"))
@@ -2932,7 +2932,7 @@ static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
 		/* empty */;
 
 	if (val)
-		IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__,
+		IRDA_WARNING("%s(): ATC: 0x%02x\n", __func__,
 			     inb(fir_base + IRCC_ATC));
 }
 
diff --git a/drivers/net/irda/tekram-sir.c b/drivers/net/irda/tekram-sir.c
index d1ce5ae6a17..048a1542284 100644
--- a/drivers/net/irda/tekram-sir.c
+++ b/drivers/net/irda/tekram-sir.c
@@ -77,7 +77,7 @@ static int tekram_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
@@ -92,7 +92,7 @@ static int tekram_open(struct sir_dev *dev)
 
 static int tekram_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -130,7 +130,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
 	u8 byte;
 	static int ret = 0;
 	
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	switch(state) {
 	case SIRDEV_STATE_DONGLE_SPEED:
@@ -179,7 +179,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
 		break;
 
 	default:
-		IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state);
+		IRDA_ERROR("%s - undefined state %d\n", __func__, state);
 		ret = -EINVAL;
 		break;
 	}
@@ -204,7 +204,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
 
 static int tekram_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Clear DTR, Set RTS */
 	sirdev_set_dtr_rts(dev, FALSE, TRUE); 
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index aa1a9b0ed83..fcf287b749d 100644
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -181,7 +181,7 @@ static int toim3232_open(struct sir_dev *dev)
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Pull the lines high to start with.
 	 *
@@ -209,7 +209,7 @@ static int toim3232_open(struct sir_dev *dev)
 
 static int toim3232_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -241,7 +241,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
 	u8 byte;
 	static int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	switch(state) {
 	case SIRDEV_STATE_DONGLE_SPEED:
@@ -299,7 +299,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
 		break;
 
 	default:
-		printk(KERN_ERR "%s - undefined state %d\n", __FUNCTION__, state);
+		printk(KERN_ERR "%s - undefined state %d\n", __func__, state);
 		ret = -EINVAL;
 		break;
 	}
@@ -344,7 +344,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
 
 static int toim3232_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	/* Switch off both DTR and RTS to switch off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 04ad3573b15..84e609ea5fb 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -152,12 +152,12 @@ static int __init via_ircc_init(void)
 {
 	int rc;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	rc = pci_register_driver(&via_driver);
 	if (rc < 0) {
 		IRDA_DEBUG(0, "%s(): error rc = %d, returning  -ENODEV...\n",
-			   __FUNCTION__, rc);
+			   __func__, rc);
 		return -ENODEV;
 	}
 	return 0;
@@ -170,11 +170,11 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 	u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase;
 	chipio_t info;
 
-	IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __FUNCTION__, id->device);
+	IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __func__, id->device);
 
 	rc = pci_enable_device (pcidev);
 	if (rc) {
-		IRDA_DEBUG(0, "%s(): error rc = %d\n", __FUNCTION__, rc);
+		IRDA_DEBUG(0, "%s(): error rc = %d\n", __func__, rc);
 		return -ENODEV;
 	}
 
@@ -185,7 +185,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 		Chipset=0x3076;
 
 	if (Chipset==0x3076) {
-		IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __FUNCTION__);
+		IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __func__);
 
 		WriteLPCReg(7,0x0c );
 		temp=ReadLPCReg(0x30);//check if BIOS Enable Fir
@@ -222,7 +222,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 		} else
 			rc = -ENODEV; //IR not turn on	 
 	} else { //Not VT1211
-		IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __FUNCTION__);
+		IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __func__);
 
 		pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir
 		if((bTmp&0x01)==1) {  // BIOS enable FIR
@@ -262,7 +262,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 			rc = -ENODEV; //IR not turn on !!!!!
 	}//Not VT1211
 
-	IRDA_DEBUG(2, "%s(): End - rc = %d\n", __FUNCTION__, rc);
+	IRDA_DEBUG(2, "%s(): End - rc = %d\n", __func__, rc);
 	return rc;
 }
 
@@ -276,7 +276,7 @@ static void via_ircc_clean(void)
 {
 	int i;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 		if (dev_self[i])
@@ -286,7 +286,7 @@ static void via_ircc_clean(void)
 
 static void __devexit via_remove_one (struct pci_dev *pdev)
 {
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	/* FIXME : This is ugly. We should use pci_get_drvdata(pdev);
 	 * to get our driver instance and call directly via_ircc_close().
@@ -301,7 +301,7 @@ static void __devexit via_remove_one (struct pci_dev *pdev)
 
 static void __exit via_ircc_cleanup(void)
 {
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	/* FIXME : This should be redundant, as pci_unregister_driver()
 	 * should call via_remove_one() on each device.
@@ -324,7 +324,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
 	struct via_ircc_cb *self;
 	int err;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	if (i >= ARRAY_SIZE(dev_self))
 		return -ENOMEM;
@@ -360,7 +360,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
 	/* Reserve the ioports that we need */
 	if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) {
 		IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
-			   __FUNCTION__, self->io.fir_base);
+			   __func__, self->io.fir_base);
 		err = -ENODEV;
 		goto err_out1;
 	}
@@ -471,7 +471,7 @@ static int via_ircc_close(struct via_ircc_cb *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
@@ -483,7 +483,7 @@ static int via_ircc_close(struct via_ircc_cb *self)
 
 	/* Release the PORT that this driver is using */
 	IRDA_DEBUG(2, "%s(), Releasing Region %03x\n",
-		   __FUNCTION__, self->io.fir_base);
+		   __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 	if (self->tx_buff.head)
 		dma_free_coherent(NULL, self->tx_buff.truesize,
@@ -509,7 +509,7 @@ static void via_hw_init(struct via_ircc_cb *self)
 {
 	int iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	SetMaxRxPacketSize(iobase, 0x0fff);	//set to max:4095
 	// FIFO Init
@@ -582,7 +582,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
 	speed = speed;
 
 	IRDA_DEBUG(1, "%s(): change_dongle_speed to %d for 0x%x, %d\n",
-		   __FUNCTION__, speed, iobase, dongle_id);
+		   __func__, speed, iobase, dongle_id);
 
 	switch (dongle_id) {
 
@@ -671,7 +671,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
 
 	case 0x11:		/* Temic TFDS4500 */
 
-		IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __FUNCTION__);
+		IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __func__);
 
 		UseOneRX(iobase, ON);	//use ONE RX....RX1
 		InvertTX(iobase, OFF);
@@ -689,7 +689,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
 			SlowIRRXLowActive(iobase, OFF);
 
 		} else{
-			IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __func__);
 		}
 		break;
 
@@ -707,7 +707,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
 
 	default:
 		IRDA_ERROR("%s: Error: dongle_id %d unsupported !\n",
-			   __FUNCTION__, dongle_id);
+			   __func__, dongle_id);
 	}
 }
 
@@ -726,7 +726,7 @@ static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 speed)
 	iobase = self->io.fir_base;
 	/* Update accounting for new speed */
 	self->io.speed = speed;
-	IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __FUNCTION__, speed);
+	IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __func__, speed);
 
 	WriteReg(iobase, I_ST_CT_0, 0x0);
 
@@ -957,7 +957,7 @@ static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase)
 			self->tx_buff.head) + self->tx_buff_dma,
 		       self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE);
 	IRDA_DEBUG(1, "%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
-		   __FUNCTION__, self->tx_fifo.ptr,
+		   __func__, self->tx_fifo.ptr,
 		   self->tx_fifo.queue[self->tx_fifo.ptr].len,
 		   self->tx_fifo.len);
 
@@ -981,7 +981,7 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self)
 	int ret = TRUE;
 	u8 Tx_status;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	iobase = self->io.fir_base;
 	/* Disable DMA */
@@ -1014,7 +1014,7 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self)
 	}
 	IRDA_DEBUG(1,
 		   "%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
-		   __FUNCTION__,
+		   __func__,
 		   self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free);
 /* F01_S
 	// Any frames to be sent back-to-back? 
@@ -1050,7 +1050,7 @@ static int via_ircc_dma_receive(struct via_ircc_cb *self)
 
 	iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
 	self->tx_fifo.tail = self->tx_buff.head;
@@ -1134,13 +1134,13 @@ static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
 			return TRUE;	//interrupt only, data maybe move by RxT  
 		if (((len - 4) < 2) || ((len - 4) > 2048)) {
 			IRDA_DEBUG(1, "%s(): Trouble:len=%x,CurCount=%x,LastCount=%x..\n",
-				   __FUNCTION__, len, RxCurCount(iobase, self),
+				   __func__, len, RxCurCount(iobase, self),
 				   self->RxLastCount);
 			hwreset(self);
 			return FALSE;
 		}
 		IRDA_DEBUG(2, "%s(): fifo.len=%x,len=%x,CurCount=%x..\n",
-			   __FUNCTION__,
+			   __func__,
 			   st_fifo->len, len - 4, RxCurCount(iobase, self));
 
 		st_fifo->entries[st_fifo->tail].status = status;
@@ -1187,7 +1187,7 @@ F01_E */
 		skb_put(skb, len - 4);
 
 		skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4);
-		IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __FUNCTION__,
+		IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __func__,
 			   len - 4, self->rx_buff.data);
 
 		// Move to next frame 
@@ -1217,7 +1217,7 @@ static int upload_rxdata(struct via_ircc_cb *self, int iobase)
 
 	len = GetRecvByte(iobase, self);
 
-	IRDA_DEBUG(2, "%s(): len=%x\n", __FUNCTION__, len);
+	IRDA_DEBUG(2, "%s(): len=%x\n", __func__, len);
 
 	if ((len - 4) < 2) {
 		self->stats.rx_dropped++;
@@ -1302,7 +1302,7 @@ static int RxTimerHandler(struct via_ircc_cb *self, int iobase)
 			skb_put(skb, len - 4);
 			skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4);
 
-			IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __FUNCTION__,
+			IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __func__,
 				   len - 4, st_fifo->head);
 
 			// Move to next frame 
@@ -1318,7 +1318,7 @@ static int RxTimerHandler(struct via_ircc_cb *self, int iobase)
 
 		IRDA_DEBUG(2,
 			   "%s(): End of upload HostStatus=%x,RxStatus=%x\n",
-			   __FUNCTION__,
+			   __func__,
 			   GetHostStatus(iobase), GetRXStatus(iobase));
 
 		/*
@@ -1358,7 +1358,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
 	iHostIntType = GetHostStatus(iobase);
 
 	IRDA_DEBUG(4, "%s(): iHostIntType %02x:  %s %s %s  %02x\n",
-		   __FUNCTION__, iHostIntType,
+		   __func__, iHostIntType,
 		   (iHostIntType & 0x40) ? "Timer" : "",
 		   (iHostIntType & 0x20) ? "Tx" : "",
 		   (iHostIntType & 0x10) ? "Rx" : "",
@@ -1388,7 +1388,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
 		iTxIntType = GetTXStatus(iobase);
 
 		IRDA_DEBUG(4, "%s(): iTxIntType %02x:  %s %s %s %s\n",
-			   __FUNCTION__, iTxIntType,
+			   __func__, iTxIntType,
 			   (iTxIntType & 0x08) ? "FIFO underr." : "",
 			   (iTxIntType & 0x04) ? "EOM" : "",
 			   (iTxIntType & 0x02) ? "FIFO ready" : "",
@@ -1412,7 +1412,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
 		iRxIntType = GetRXStatus(iobase);
 
 		IRDA_DEBUG(4, "%s(): iRxIntType %02x:  %s %s %s %s %s %s %s\n",
-			   __FUNCTION__, iRxIntType,
+			   __func__, iRxIntType,
 			   (iRxIntType & 0x80) ? "PHY err."	: "",
 			   (iRxIntType & 0x40) ? "CRC err"	: "",
 			   (iRxIntType & 0x20) ? "FIFO overr."	: "",
@@ -1421,7 +1421,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
 			   (iRxIntType & 0x02) ? "RxMaxLen"	: "",
 			   (iRxIntType & 0x01) ? "SIR bad"	: "");
 		if (!iRxIntType)
-			IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __FUNCTION__);
+			IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __func__);
 
 		if (iRxIntType & 0x10) {
 			if (via_ircc_dma_receive_complete(self, iobase)) {
@@ -1431,7 +1431,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
 		}		// No ERR     
 		else {		//ERR
 			IRDA_DEBUG(4, "%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
-				   __FUNCTION__, iRxIntType, iHostIntType,
+				   __func__, iRxIntType, iHostIntType,
 				   RxCurCount(iobase, self),
 				   self->RxLastCount);
 
@@ -1456,7 +1456,7 @@ static void hwreset(struct via_ircc_cb *self)
 	int iobase;
 	iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	ResetChip(iobase, 5);
 	EnableDMA(iobase, OFF);
@@ -1501,7 +1501,7 @@ static int via_ircc_is_receiving(struct via_ircc_cb *self)
 	if (CkRxRecv(iobase, self))
 		status = TRUE;
 
-	IRDA_DEBUG(2, "%s(): status=%x....\n", __FUNCTION__, status);
+	IRDA_DEBUG(2, "%s(): status=%x....\n", __func__, status);
 
 	return status;
 }
@@ -1519,7 +1519,7 @@ static int via_ircc_net_open(struct net_device *dev)
 	int iobase;
 	char hwname[32];
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = (struct via_ircc_cb *) dev->priv;
@@ -1586,7 +1586,7 @@ static int via_ircc_net_close(struct net_device *dev)
 	struct via_ircc_cb *self;
 	int iobase;
 
-	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(3, "%s()\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = (struct via_ircc_cb *) dev->priv;
@@ -1630,7 +1630,7 @@ static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq,
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = dev->priv;
 	IRDA_ASSERT(self != NULL, return -1;);
-	IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name,
+	IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name,
 		   cmd);
 	/* Disable interrupts & save flags */
 	spin_lock_irqsave(&self->lock, flags);
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index d15e00b8591..18f4b3a96ae 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -140,15 +140,15 @@ static void vlsi_ring_debug(struct vlsi_ring *r)
 	unsigned i;
 
 	printk(KERN_DEBUG "%s - ring %p / size %u / mask 0x%04x / len %u / dir %d / hw %p\n",
-		__FUNCTION__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw);
-	printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __FUNCTION__,
+		__func__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw);
+	printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __func__,
 		atomic_read(&r->head) & r->mask, atomic_read(&r->tail) & r->mask);
 	for (i = 0; i < r->size; i++) {
 		rd = &r->rd[i];
-		printk(KERN_DEBUG "%s - ring descr %u: ", __FUNCTION__, i);
+		printk(KERN_DEBUG "%s - ring descr %u: ", __func__, i);
 		printk("skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw);
 		printk(KERN_DEBUG "%s - hw: status=%02x count=%u addr=0x%08x\n",
-			__FUNCTION__, (unsigned) rd_get_status(rd),
+			__func__, (unsigned) rd_get_status(rd),
 			(unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd));
 	}
 }
@@ -435,7 +435,7 @@ static struct vlsi_ring *vlsi_alloc_ring(struct pci_dev *pdev, struct ring_descr
 		    ||  !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
 			if (rd->buf) {
 				IRDA_ERROR("%s: failed to create PCI-MAP for %p",
-					   __FUNCTION__, rd->buf);
+					   __func__, rd->buf);
 				kfree(rd->buf);
 				rd->buf = NULL;
 			}
@@ -489,7 +489,7 @@ static int vlsi_create_hwif(vlsi_irda_dev_t *idev)
 	ringarea = pci_alloc_consistent(idev->pdev, HW_RING_AREA_SIZE, &idev->busaddr);
 	if (!ringarea) {
 		IRDA_ERROR("%s: insufficient memory for descriptor rings\n",
-			   __FUNCTION__);
+			   __func__);
 		goto out;
 	}
 	memset(ringarea, 0, HW_RING_AREA_SIZE);
@@ -564,7 +564,7 @@ static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd)
 	crclen = (idev->mode==IFF_FIR) ? sizeof(u32) : sizeof(u16);
 	len -= crclen;		/* remove trailing CRC */
 	if (len <= 0) {
-		IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __FUNCTION__, len);
+		IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __func__, len);
 		ret |= VLSI_RX_DROP;
 		goto done;
 	}
@@ -579,14 +579,14 @@ static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd)
 		 */
 		le16_to_cpus(rd->buf+len);
 		if (irda_calc_crc16(INIT_FCS,rd->buf,len+crclen) != GOOD_FCS) {
-			IRDA_DEBUG(0, "%s: crc error\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s: crc error\n", __func__);
 			ret |= VLSI_RX_CRC;
 			goto done;
 		}
 	}
 
 	if (!rd->skb) {
-		IRDA_WARNING("%s: rx packet lost\n", __FUNCTION__);
+		IRDA_WARNING("%s: rx packet lost\n", __func__);
 		ret |= VLSI_RX_DROP;
 		goto done;
 	}
@@ -617,7 +617,7 @@ static void vlsi_fill_rx(struct vlsi_ring *r)
 	for (rd = ring_last(r); rd != NULL; rd = ring_put(r)) {
 		if (rd_is_active(rd)) {
 			IRDA_WARNING("%s: driver bug: rx descr race with hw\n",
-				     __FUNCTION__);
+				     __func__);
 			vlsi_ring_debug(r);
 			break;
 		}
@@ -676,7 +676,7 @@ static void vlsi_rx_interrupt(struct net_device *ndev)
 
 	if (ring_first(r) == NULL) {
 		/* we are in big trouble, if this should ever happen */
-		IRDA_ERROR("%s: rx ring exhausted!\n", __FUNCTION__);
+		IRDA_ERROR("%s: rx ring exhausted!\n", __func__);
 		vlsi_ring_debug(r);
 	}
 	else
@@ -697,7 +697,7 @@ static void vlsi_unarm_rx(vlsi_irda_dev_t *idev)
 		if (rd_is_active(rd)) {
 			rd_set_status(rd, 0);
 			if (rd_get_count(rd)) {
-				IRDA_DEBUG(0, "%s - dropping rx packet\n", __FUNCTION__);
+				IRDA_DEBUG(0, "%s - dropping rx packet\n", __func__);
 				ret = -VLSI_RX_DROP;
 			}
 			rd_set_count(rd, 0);
@@ -772,7 +772,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 	int	fifocnt;
 
 	baudrate = idev->new_baud;
-	IRDA_DEBUG(2, "%s: %d -> %d\n", __FUNCTION__, idev->baud, idev->new_baud);
+	IRDA_DEBUG(2, "%s: %d -> %d\n", __func__, idev->baud, idev->new_baud);
 	if (baudrate == 4000000) {
 		mode = IFF_FIR;
 		config = IRCFG_FIR;
@@ -789,7 +789,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 		switch(baudrate) {
 			default:
 				IRDA_WARNING("%s: undefined baudrate %d - fallback to 9600!\n",
-					     __FUNCTION__, baudrate);
+					     __func__, baudrate);
 				baudrate = 9600;
 				/* fallthru */
 			case 2400:
@@ -806,7 +806,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 
 	fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
 	if (fifocnt != 0) {
-		IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt);
+		IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt);
 	}
 
 	outw(0, iobase+VLSI_PIO_IRENABLE);
@@ -830,14 +830,14 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 		config ^= IRENABLE_SIR_ON;
 
 	if (config != (IRENABLE_PHYANDCLOCK|IRENABLE_ENRXST)) {
-		IRDA_WARNING("%s: failed to set %s mode!\n", __FUNCTION__,
+		IRDA_WARNING("%s: failed to set %s mode!\n", __func__,
 			(mode==IFF_SIR)?"SIR":((mode==IFF_MIR)?"MIR":"FIR"));
 		ret = -1;
 	}
 	else {
 		if (inw(iobase+VLSI_PIO_PHYCTL) != nphyctl) {
 			IRDA_WARNING("%s: failed to apply baudrate %d\n",
-				     __FUNCTION__, baudrate);
+				     __func__, baudrate);
 			ret = -1;
 		}
 		else {
@@ -849,7 +849,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 	}
 
 	if (ret)
-		vlsi_reg_debug(iobase,__FUNCTION__);
+		vlsi_reg_debug(iobase,__func__);
 
 	return ret;
 }
@@ -982,7 +982,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 		if (len >= r->len-5)
 			 IRDA_WARNING("%s: possible buffer overflow with SIR wrapping!\n",
-				      __FUNCTION__);
+				      __func__);
 	}
 	else {
 		/* hw deals with MIR/FIR mode wrapping */
@@ -1027,7 +1027,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 		fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
 		if (fifocnt != 0) {
-			IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt);
+			IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt);
 		}
 
 		config = inw(iobase+VLSI_PIO_IRCFG);
@@ -1040,7 +1040,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	if (ring_put(r) == NULL) {
 		netif_stop_queue(ndev);
-		IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __FUNCTION__);
+		IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __func__);
 	}
 	spin_unlock_irqrestore(&idev->lock, flags);
 
@@ -1049,7 +1049,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 drop_unlock:
 	spin_unlock_irqrestore(&idev->lock, flags);
 drop:
-	IRDA_WARNING("%s: dropping packet - %s\n", __FUNCTION__, msg);
+	IRDA_WARNING("%s: dropping packet - %s\n", __func__, msg);
 	dev_kfree_skb_any(skb);
 	idev->stats.tx_errors++;
 	idev->stats.tx_dropped++;
@@ -1106,7 +1106,7 @@ static void vlsi_tx_interrupt(struct net_device *ndev)
 		fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
 		if (fifocnt != 0) {
 			IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n",
-				__FUNCTION__, fifocnt);
+				__func__, fifocnt);
 		}
 		outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG);
 	}
@@ -1115,7 +1115,7 @@ static void vlsi_tx_interrupt(struct net_device *ndev)
 
 	if (netif_queue_stopped(ndev)  &&  !idev->new_baud) {
 		netif_wake_queue(ndev);
-		IRDA_DEBUG(3, "%s: queue awoken\n", __FUNCTION__);
+		IRDA_DEBUG(3, "%s: queue awoken\n", __func__);
 	}
 }
 
@@ -1138,7 +1138,7 @@ static void vlsi_unarm_tx(vlsi_irda_dev_t *idev)
 				dev_kfree_skb_any(rd->skb);
 				rd->skb = NULL;
 			}
-			IRDA_DEBUG(0, "%s - dropping tx packet\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s - dropping tx packet\n", __func__);
 			ret = -VLSI_TX_DROP;
 		}
 		else
@@ -1188,7 +1188,7 @@ static int vlsi_start_clock(struct pci_dev *pdev)
 		if (count < 3) {
 			if (clksrc == 1) { /* explicitly asked for PLL hence bail out */
 				IRDA_ERROR("%s: no PLL or failed to lock!\n",
-					   __FUNCTION__);
+					   __func__);
 				clkctl = CLKCTL_CLKSTP;
 				pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
 				return -1;
@@ -1197,7 +1197,7 @@ static int vlsi_start_clock(struct pci_dev *pdev)
 				clksrc = 3;	/* fallback to 40MHz XCLK (OB800) */
 
 			IRDA_DEBUG(0, "%s: PLL not locked, fallback to clksrc=%d\n",
-				__FUNCTION__, clksrc);
+				__func__, clksrc);
 		}
 		else
 			clksrc = 1;	/* got successful PLL lock */
@@ -1269,7 +1269,7 @@ static int vlsi_init_chip(struct pci_dev *pdev)
 	/* start the clock and clean the registers */
 
 	if (vlsi_start_clock(pdev)) {
-		IRDA_ERROR("%s: no valid clock source\n", __FUNCTION__);
+		IRDA_ERROR("%s: no valid clock source\n", __func__);
 		return -1;
 	}
 	iobase = ndev->base_addr;
@@ -1386,7 +1386,7 @@ static void vlsi_tx_timeout(struct net_device *ndev)
 	vlsi_irda_dev_t *idev = ndev->priv;
 
 
-	vlsi_reg_debug(ndev->base_addr, __FUNCTION__);
+	vlsi_reg_debug(ndev->base_addr, __func__);
 	vlsi_ring_debug(idev->tx_ring);
 
 	if (netif_running(ndev))
@@ -1401,7 +1401,7 @@ static void vlsi_tx_timeout(struct net_device *ndev)
 
 	if (vlsi_start_hw(idev))
 		IRDA_ERROR("%s: failed to restart hw - %s(%s) unusable!\n",
-			   __FUNCTION__, pci_name(idev->pdev), ndev->name);
+			   __func__, pci_name(idev->pdev), ndev->name);
 	else
 		netif_start_queue(ndev);
 }
@@ -1446,7 +1446,7 @@ static int vlsi_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
 			break;
 		default:
 			IRDA_WARNING("%s: notsupp - cmd=%04x\n",
-				     __FUNCTION__, cmd);
+				     __func__, cmd);
 			ret = -EOPNOTSUPP;
 	}	
 	
@@ -1491,7 +1491,7 @@ static irqreturn_t vlsi_interrupt(int irq, void *dev_instance)
 
 	if (boguscount <= 0)
 		IRDA_MESSAGE("%s: too much work in interrupt!\n",
-			     __FUNCTION__);
+			     __func__);
 	return IRQ_RETVAL(handled);
 }
 
@@ -1504,7 +1504,7 @@ static int vlsi_open(struct net_device *ndev)
 	char	hwname[32];
 
 	if (pci_request_regions(idev->pdev, drivername)) {
-		IRDA_WARNING("%s: io resource busy\n", __FUNCTION__);
+		IRDA_WARNING("%s: io resource busy\n", __func__);
 		goto errout;
 	}
 	ndev->base_addr = pci_resource_start(idev->pdev,0);
@@ -1519,7 +1519,7 @@ static int vlsi_open(struct net_device *ndev)
 	if (request_irq(ndev->irq, vlsi_interrupt, IRQF_SHARED,
 			drivername, ndev)) {
 		IRDA_WARNING("%s: couldn't get IRQ: %d\n",
-			     __FUNCTION__, ndev->irq);
+			     __func__, ndev->irq);
 		goto errout_io;
 	}
 
@@ -1540,7 +1540,7 @@ static int vlsi_open(struct net_device *ndev)
 
 	netif_start_queue(ndev);
 
-	IRDA_MESSAGE("%s: device %s operational\n", __FUNCTION__, ndev->name);
+	IRDA_MESSAGE("%s: device %s operational\n", __func__, ndev->name);
 
 	return 0;
 
@@ -1574,7 +1574,7 @@ static int vlsi_close(struct net_device *ndev)
 
 	pci_release_regions(idev->pdev);
 
-	IRDA_MESSAGE("%s: device %s stopped\n", __FUNCTION__, ndev->name);
+	IRDA_MESSAGE("%s: device %s stopped\n", __func__, ndev->name);
 
 	return 0;
 }
@@ -1593,7 +1593,7 @@ static int vlsi_irda_init(struct net_device *ndev)
 
 	if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW)
 	    || pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) {
-		IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __FUNCTION__);
+		IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __func__);
 		return -1;
 	}
 
@@ -1645,14 +1645,14 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	if ( !pci_resource_start(pdev,0)
 	     || !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) {
-		IRDA_ERROR("%s: bar 0 invalid", __FUNCTION__);
+		IRDA_ERROR("%s: bar 0 invalid", __func__);
 		goto out_disable;
 	}
 
 	ndev = alloc_irdadev(sizeof(*idev));
 	if (ndev==NULL) {
 		IRDA_ERROR("%s: Unable to allocate device memory.\n",
-			   __FUNCTION__);
+			   __func__);
 		goto out_disable;
 	}
 
@@ -1667,7 +1667,7 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_freedev;
 
 	if (register_netdev(ndev) < 0) {
-		IRDA_ERROR("%s: register_netdev failed\n", __FUNCTION__);
+		IRDA_ERROR("%s: register_netdev failed\n", __func__);
 		goto out_freedev;
 	}
 
@@ -1678,7 +1678,7 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 				       vlsi_proc_root, VLSI_PROC_FOPS, ndev);
 		if (!ent) {
 			IRDA_WARNING("%s: failed to create proc entry\n",
-				     __FUNCTION__);
+				     __func__);
 		} else {
 			ent->size = 0;
 		}
@@ -1745,7 +1745,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	if (!ndev) {
 		IRDA_ERROR("%s - %s: no netdevice \n",
-			   __FUNCTION__, pci_name(pdev));
+			   __func__, pci_name(pdev));
 		return 0;
 	}
 	idev = ndev->priv;	
@@ -1756,7 +1756,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
 			pdev->current_state = state.event;
 		}
 		else
-			IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event);
+			IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __func__, pci_name(pdev), pdev->current_state, state.event);
 		mutex_unlock(&idev->mtx);
 		return 0;
 	}
@@ -1784,7 +1784,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
 
 	if (!ndev) {
 		IRDA_ERROR("%s - %s: no netdevice \n",
-			   __FUNCTION__, pci_name(pdev));
+			   __func__, pci_name(pdev));
 		return 0;
 	}
 	idev = ndev->priv;	
@@ -1792,7 +1792,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
 	if (pdev->current_state == 0) {
 		mutex_unlock(&idev->mtx);
 		IRDA_WARNING("%s - %s: already resumed\n",
-			     __FUNCTION__, pci_name(pdev));
+			     __func__, pci_name(pdev));
 		return 0;
 	}
 	
@@ -1811,7 +1811,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
 		 * now we explicitly set pdev->current_state = 0 after enabling the
 		 * device and independently resume_ok should catch any garbage config.
 		 */
-		IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__);
+		IRDA_WARNING("%s - hm, nothing to resume?\n", __func__);
 		mutex_unlock(&idev->mtx);
 		return 0;
 	}
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index c8b9c74eea5..9b1884329fb 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -617,7 +617,7 @@ static inline void rd_set_addr_status(struct ring_descr *rd, dma_addr_t a, u8 s)
 	 */
 
 	if ((a & ~DMA_MASK_MSTRPAGE)>>24 != MSTRPAGE_VALUE) {
-		IRDA_ERROR("%s: pci busaddr inconsistency!\n", __FUNCTION__);
+		IRDA_ERROR("%s: pci busaddr inconsistency!\n", __func__);
 		dump_stack();
 		return;
 	}
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index 9fd2451b0fb..002a6d769f2 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -114,7 +114,7 @@ static int __init w83977af_init(void)
 {
         int i;
 
-	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(0, "%s()\n", __func__ );
 
 	for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) {
 		if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
@@ -133,7 +133,7 @@ static void __exit w83977af_cleanup(void)
 {
 	int i;
 
-        IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(4, "%s()\n", __func__ );
 
 	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 		if (dev_self[i])
@@ -154,12 +154,12 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq,
         struct w83977af_ir *self;
 	int err;
 
-	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(0, "%s()\n", __func__ );
 
 	/* Lock the port that we need */
 	if (!request_region(iobase, CHIP_IO_EXTENT, driver_name)) {
 		IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
-		      __FUNCTION__ , iobase);
+		      __func__ , iobase);
 		return -ENODEV;
 	}
 
@@ -241,7 +241,7 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq,
 
 	err = register_netdev(dev);
 	if (err) {
-		IRDA_ERROR("%s(), register_netdevice() failed!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), register_netdevice() failed!\n", __func__);
 		goto err_out3;
 	}
 	IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
@@ -273,7 +273,7 @@ static int w83977af_close(struct w83977af_ir *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(0, "%s()\n", __func__ );
 
         iobase = self->io.fir_base;
 
@@ -294,7 +294,7 @@ static int w83977af_close(struct w83977af_ir *self)
 
 	/* Release the PORT that this driver is using */
 	IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n", 
-	      __FUNCTION__ , self->io.fir_base);
+	      __func__ , self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -316,7 +316,7 @@ int w83977af_probe( int iobase, int irq, int dma)
 	int i;
   	
  	for (i=0; i < 2; i++) {
- 		IRDA_DEBUG( 0, "%s()\n", __FUNCTION__ );
+		IRDA_DEBUG( 0, "%s()\n", __func__ );
 #ifdef CONFIG_USE_W977_PNP
  		/* Enter PnP configuration mode */
 		w977_efm_enter(efbase[i]);
@@ -403,7 +403,7 @@ int w83977af_probe( int iobase, int irq, int dma)
 			return 0;
 		} else {
 			/* Try next extented function register address */
-			IRDA_DEBUG( 0, "%s(), Wrong chip version", __FUNCTION__ );
+			IRDA_DEBUG( 0, "%s(), Wrong chip version", __func__ );
 		}
   	}   	
 	return -1;
@@ -439,19 +439,19 @@ void w83977af_change_speed(struct w83977af_ir *self, __u32 speed)
 	case 115200: outb(0x01, iobase+ABLL); break;
 	case 576000:
 		ir_mode = HCR_MIR_576;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__ );
+		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__ );
 		break;
 	case 1152000:
 		ir_mode = HCR_MIR_1152;
-		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__ );
+		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__ );
 		break;
 	case 4000000:
 		ir_mode = HCR_FIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__ );
+		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__ );
 		break;
 	default:
 		ir_mode = HCR_FIR;
-		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __FUNCTION__ , speed);
+		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __func__ , speed);
 		break;
 	}
 
@@ -501,7 +501,7 @@ int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	iobase = self->io.fir_base;
 
-	IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __FUNCTION__ , jiffies, 
+	IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __func__ , jiffies,
 		   (int) skb->len);
 	
 	/* Lock transmit buffer */
@@ -549,7 +549,7 @@ int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 			outb(ICR_ETMRI, iobase+ICR);
 		} else {
 #endif
-			IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __FUNCTION__ , jiffies, mtt);
+			IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
 			if (mtt)
 				udelay(mtt);
 
@@ -591,7 +591,7 @@ static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
 	unsigned long flags;
 	__u8 hcr;
 #endif
-        IRDA_DEBUG(4, "%s(), len=%d\n", __FUNCTION__ , self->tx_buff.len);
+        IRDA_DEBUG(4, "%s(), len=%d\n", __func__ , self->tx_buff.len);
 
 	/* Save current set */
 	set = inb(iobase+SSR);
@@ -643,7 +643,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	int actual = 0;
 	__u8 set;
 	
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(4, "%s()\n", __func__ );
 
 	/* Save current bank */
 	set = inb(iobase+SSR);
@@ -651,11 +651,11 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	switch_bank(iobase, SET0);
 	if (!(inb_p(iobase+USR) & USR_TSRE)) {
 		IRDA_DEBUG(4,
-			   "%s(), warning, FIFO not empty yet!\n", __FUNCTION__  );
+			   "%s(), warning, FIFO not empty yet!\n", __func__  );
 
 		fifo_size -= 17;
 		IRDA_DEBUG(4, "%s(), %d bytes left in tx fifo\n", 
-			   __FUNCTION__ , fifo_size);
+			   __func__ , fifo_size);
 	}
 
 	/* Fill FIFO with current frame */
@@ -665,7 +665,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	}
         
 	IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
-		   __FUNCTION__ , fifo_size, actual, len);
+		   __func__ , fifo_size, actual, len);
 
 	/* Restore bank */
 	outb(set, iobase+SSR);
@@ -685,7 +685,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
 	int iobase;
 	__u8 set;
 
-	IRDA_DEBUG(4, "%s(%ld)\n", __FUNCTION__ , jiffies);
+	IRDA_DEBUG(4, "%s(%ld)\n", __func__ , jiffies);
 
 	IRDA_ASSERT(self != NULL, return;);
 
@@ -700,7 +700,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
 	
 	/* Check for underrrun! */
 	if (inb(iobase+AUDR) & AUDR_UNDR) {
-		IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __FUNCTION__ );
+		IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ );
 		
 		self->stats.tx_errors++;
 		self->stats.tx_fifo_errors++;
@@ -741,7 +741,7 @@ int w83977af_dma_receive(struct w83977af_ir *self)
 #endif
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(4, "%s\n", __FUNCTION__ );
+	IRDA_DEBUG(4, "%s\n", __func__ );
 
 	iobase= self->io.fir_base;
 
@@ -812,7 +812,7 @@ int w83977af_dma_receive_complete(struct w83977af_ir *self)
 	__u8 set;
 	__u8 status;
 
-	IRDA_DEBUG(4, "%s\n", __FUNCTION__ );
+	IRDA_DEBUG(4, "%s\n", __func__ );
 
 	st_fifo = &self->st_fifo;
 
@@ -892,7 +892,7 @@ int w83977af_dma_receive_complete(struct w83977af_ir *self)
 			skb = dev_alloc_skb(len+1);
 			if (skb == NULL)  {
 				printk(KERN_INFO
-				       "%s(), memory squeeze, dropping frame.\n", __FUNCTION__);
+				       "%s(), memory squeeze, dropping frame.\n", __func__);
 				/* Restore set register */
 				outb(set, iobase+SSR);
 
@@ -943,7 +943,7 @@ static void w83977af_pio_receive(struct w83977af_ir *self)
 	__u8 byte = 0x00;
 	int iobase;
 
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(4, "%s()\n", __func__ );
 
 	IRDA_ASSERT(self != NULL, return;);
 	
@@ -970,7 +970,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
 	__u8 set;
 	int iobase;
 
-	IRDA_DEBUG(4, "%s(), isr=%#x\n", __FUNCTION__ , isr);
+	IRDA_DEBUG(4, "%s(), isr=%#x\n", __func__ , isr);
 	
 	iobase = self->io.fir_base;
 	/* Transmit FIFO low on data */
@@ -1007,7 +1007,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
 		/* Check if we need to change the speed? */
 		if (self->new_speed) {
 			IRDA_DEBUG(2,
-				   "%s(), Changing speed!\n", __FUNCTION__ );
+				   "%s(), Changing speed!\n", __func__ );
 			w83977af_change_speed(self, self->new_speed);
 			self->new_speed = 0;
 		}
@@ -1189,7 +1189,7 @@ static int w83977af_net_open(struct net_device *dev)
 	char hwname[32];
 	__u8 set;
 	
-	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(0, "%s()\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = (struct w83977af_ir *) dev->priv;
@@ -1252,7 +1252,7 @@ static int w83977af_net_close(struct net_device *dev)
 	int iobase;
 	__u8 set;
 
-	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	IRDA_DEBUG(0, "%s()\n", __func__ );
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	
@@ -1307,7 +1307,7 @@ static int w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
 	
 	spin_lock_irqsave(&self->lock, flags);
 
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 2f38e847e2c..f96358b641a 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -190,6 +190,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
 	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
 	case IXGBE_DEV_ID_82598EB_CX4:
+	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
 		media_type = ixgbe_media_type_fiber;
 		break;
 	case IXGBE_DEV_ID_82598AT_DUAL_PORT:
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e5f3da8468c..a417be7f8be 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -48,7 +48,7 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
 	"Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "1.3.18-k2"
+#define DRV_VERSION "1.3.18-k4"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static const char ixgbe_copyright[] =
 	 "Copyright (c) 1999-2007 Intel Corporation.";
@@ -72,6 +72,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82598 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4),
 	 board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT),
+	 board_82598 },
 
 	/* required last entry */
 	{0, }
@@ -1634,16 +1636,17 @@ static void ixgbe_set_multi(struct net_device *netdev)
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct dev_mc_list *mc_ptr;
 	u8 *mta_list;
-	u32 fctrl;
+	u32 fctrl, vlnctrl;
 	int i;
 
 	/* Check for Promiscuous and All Multicast modes */
 
 	fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
 
 	if (netdev->flags & IFF_PROMISC) {
 		fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
-		fctrl &= ~IXGBE_VLNCTRL_VFE;
+		vlnctrl &= ~IXGBE_VLNCTRL_VFE;
 	} else {
 		if (netdev->flags & IFF_ALLMULTI) {
 			fctrl |= IXGBE_FCTRL_MPE;
@@ -1651,10 +1654,11 @@ static void ixgbe_set_multi(struct net_device *netdev)
 		} else {
 			fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
 		}
-		fctrl |= IXGBE_VLNCTRL_VFE;
+		vlnctrl |= IXGBE_VLNCTRL_VFE;
 	}
 
 	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 
 	if (netdev->mc_count) {
 		mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC);
@@ -2300,6 +2304,12 @@ static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
 	int vector, v_budget;
 
 	/*
+	 * Set the default interrupt throttle rate.
+	 */
+	adapter->rx_eitr = (1000000 / IXGBE_DEFAULT_ITR_RX_USECS);
+	adapter->tx_eitr = (1000000 / IXGBE_DEFAULT_ITR_TX_USECS);
+
+	/*
 	 * It's easy to be greedy for MSI-X vectors, but it really
 	 * doesn't do us much good if we have a lot more vectors
 	 * than CPU's.  So let's be conservative and only ask for
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 1ad7cb9c25a..c0282a223df 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -39,6 +39,7 @@
 #define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
 #define IXGBE_DEV_ID_82598AT_DUAL_PORT   0x10C8
 #define IXGBE_DEV_ID_82598EB_CX4         0x10DD
+#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
 
 /* General Registers */
 #define IXGBE_CTRL      0x00000
diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ixp2000/ixp2400-msf.c
index 9ec38eebfb5..f5ffd7e05d2 100644
--- a/drivers/net/ixp2000/ixp2400-msf.c
+++ b/drivers/net/ixp2000/ixp2400-msf.c
@@ -13,8 +13,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
-#include <asm/arch/ixp2000-regs.h>
+#include <mach/hardware.h>
+#include <mach/ixp2000-regs.h>
 #include <asm/delay.h>
 #include <asm/io.h>
 #include "ixp2400-msf.h"
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 7111c65f0b3..7b70c66504a 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -16,7 +16,6 @@
 #include <linux/init.h>
 #include <linux/moduleparam.h>
 #include <asm/hardware/uengine.h>
-#include <asm/mach-types.h>
 #include <asm/io.h>
 #include "ixp2400_rx.ucode"
 #include "ixp2400_tx.ucode"
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 49f6bc036a9..3b43bfd85a0 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -64,68 +64,6 @@ struct pcpu_lstats {
 	unsigned long bytes;
 };
 
-/* KISS: just allocate small chunks and copy bits.
- *
- * So, in fact, this is documentation, explaining what we expect
- * of largesending device modulo TCP checksum, which is ignored for loopback.
- */
-
-#ifdef LOOPBACK_TSO
-static void emulate_large_send_offload(struct sk_buff *skb)
-{
-	struct iphdr *iph = ip_hdr(skb);
-	struct tcphdr *th = (struct tcphdr *)(skb_network_header(skb) +
-					      (iph->ihl * 4));
-	unsigned int doffset = (iph->ihl + th->doff) * 4;
-	unsigned int mtu = skb_shinfo(skb)->gso_size + doffset;
-	unsigned int offset = 0;
-	u32 seq = ntohl(th->seq);
-	u16 id  = ntohs(iph->id);
-
-	while (offset + doffset < skb->len) {
-		unsigned int frag_size = min(mtu, skb->len - offset) - doffset;
-		struct sk_buff *nskb = alloc_skb(mtu + 32, GFP_ATOMIC);
-
-		if (!nskb)
-			break;
-		skb_reserve(nskb, 32);
-		skb_set_mac_header(nskb, -ETH_HLEN);
-		skb_reset_network_header(nskb);
-		iph = ip_hdr(nskb);
-		skb_copy_to_linear_data(nskb, skb_network_header(skb),
-					doffset);
-		if (skb_copy_bits(skb,
-				  doffset + offset,
-				  nskb->data + doffset,
-				  frag_size))
-			BUG();
-		skb_put(nskb, doffset + frag_size);
-		nskb->ip_summed = CHECKSUM_UNNECESSARY;
-		nskb->dev = skb->dev;
-		nskb->priority = skb->priority;
-		nskb->protocol = skb->protocol;
-		nskb->dst = dst_clone(skb->dst);
-		memcpy(nskb->cb, skb->cb, sizeof(skb->cb));
-		nskb->pkt_type = skb->pkt_type;
-
-		th = (struct tcphdr *)(skb_network_header(nskb) + iph->ihl * 4);
-		iph->tot_len = htons(frag_size + doffset);
-		iph->id = htons(id);
-		iph->check = 0;
-		iph->check = ip_fast_csum((unsigned char *) iph, iph->ihl);
-		th->seq = htonl(seq);
-		if (offset + doffset + frag_size < skb->len)
-			th->fin = th->psh = 0;
-		netif_rx(nskb);
-		offset += frag_size;
-		seq += frag_size;
-		id++;
-	}
-
-	dev_kfree_skb(skb);
-}
-#endif /* LOOPBACK_TSO */
-
 /*
  * The higher levels take care of making this non-reentrant (it's
  * called with bh's disabled).
@@ -137,9 +75,6 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
 	skb_orphan(skb);
 
 	skb->protocol = eth_type_trans(skb,dev);
-#ifndef LOOPBACK_MUST_CHECKSUM
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-#endif
 
 #ifdef LOOPBACK_TSO
 	if (skb_is_gso(skb)) {
@@ -234,9 +169,7 @@ static void loopback_setup(struct net_device *dev)
 	dev->type		= ARPHRD_LOOPBACK;	/* 0x0001*/
 	dev->flags		= IFF_LOOPBACK;
 	dev->features 		= NETIF_F_SG | NETIF_F_FRAGLIST
-#ifdef LOOPBACK_TSO
 		| NETIF_F_TSO
-#endif
 		| NETIF_F_NO_CSUM
 		| NETIF_F_HIGHDMA
 		| NETIF_F_LLTX
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index 591a7e4220c..83fa9d82a00 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -1272,8 +1272,6 @@ static void set_multicast_list(struct net_device *dev) {
 			return;
 		}
 		if (dev->mc_count == 0 && !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
-			if (dev->flags & IFF_ALLMULTI)
-				dev->flags |= IFF_PROMISC;
 			lp->i596_config[8] &= ~0x01;
 		} else {
 			lp->i596_config[8] |= 0x01;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index daba82bbcb5..84c77f1f9a5 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -21,8 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #include "macb.h"
 
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index 4cb364e67dc..0a97c26df6a 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -100,7 +100,7 @@ static inline void load_eaddr(struct net_device *dev)
 	DPRINTK("Loading MAC Address: %s\n", print_mac(mac, dev->dev_addr));
 	macaddr = 0;
 	for (i = 0; i < 6; i++)
-		macaddr |= dev->dev_addr[i] << ((5 - i) * 8);
+		macaddr |= (u64)dev->dev_addr[i] << ((5 - i) * 8);
 
 	mace->eth.mac_addr = macaddr;
 }
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index 62071d9c4a5..d1dd5b48dbd 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -67,11 +67,10 @@ struct mlx4_mpt_entry {
 #define MLX4_MPT_FLAG_PHYSICAL	    (1 <<  9)
 #define MLX4_MPT_FLAG_REGION	    (1 <<  8)
 
-#define MLX4_MPT_PD_FLAG_FAST_REG   (1 << 26)
+#define MLX4_MPT_PD_FLAG_FAST_REG   (1 << 27)
+#define MLX4_MPT_PD_FLAG_RAE	    (1 << 28)
 #define MLX4_MPT_PD_FLAG_EN_INV	    (3 << 24)
 
-#define MLX4_MTT_FLAG_PRESENT		1
-
 #define MLX4_MPT_STATUS_SW		0xF0
 #define MLX4_MPT_STATUS_HW		0x00
 
@@ -348,7 +347,10 @@ int mlx4_mr_enable(struct mlx4_dev *dev, struct mlx4_mr *mr)
 	if (mr->mtt.order >= 0 && mr->mtt.page_shift == 0) {
 		/* fast register MR in free state */
 		mpt_entry->flags    |= cpu_to_be32(MLX4_MPT_FLAG_FREE);
-		mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG);
+		mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG |
+						   MLX4_MPT_PD_FLAG_RAE);
+		mpt_entry->mtt_sz    = cpu_to_be32((1 << mr->mtt.order) *
+						   MLX4_MTT_ENTRY_PER_SEG);
 	} else {
 		mpt_entry->flags    |= cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS);
 	}
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 8a97a0066a8..0a18b9e96da 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -55,7 +55,7 @@
 #include <asm/system.h>
 
 static char mv643xx_eth_driver_name[] = "mv643xx_eth";
-static char mv643xx_eth_driver_version[] = "1.1";
+static char mv643xx_eth_driver_version[] = "1.3";
 
 #define MV643XX_ETH_CHECKSUM_OFFLOAD_TX
 #define MV643XX_ETH_NAPI
@@ -90,12 +90,21 @@ static char mv643xx_eth_driver_version[] = "1.1";
 #define PORT_SERIAL_CONTROL(p)		(0x043c + ((p) << 10))
 #define PORT_STATUS(p)			(0x0444 + ((p) << 10))
 #define  TX_FIFO_EMPTY			0x00000400
+#define  TX_IN_PROGRESS			0x00000080
+#define  PORT_SPEED_MASK		0x00000030
+#define  PORT_SPEED_1000		0x00000010
+#define  PORT_SPEED_100			0x00000020
+#define  PORT_SPEED_10			0x00000000
+#define  FLOW_CONTROL_ENABLED		0x00000008
+#define  FULL_DUPLEX			0x00000004
+#define  LINK_UP			0x00000002
 #define TXQ_COMMAND(p)			(0x0448 + ((p) << 10))
 #define TXQ_FIX_PRIO_CONF(p)		(0x044c + ((p) << 10))
 #define TX_BW_RATE(p)			(0x0450 + ((p) << 10))
 #define TX_BW_MTU(p)			(0x0458 + ((p) << 10))
 #define TX_BW_BURST(p)			(0x045c + ((p) << 10))
 #define INT_CAUSE(p)			(0x0460 + ((p) << 10))
+#define  INT_TX_END_0			0x00080000
 #define  INT_TX_END			0x07f80000
 #define  INT_RX				0x0007fbfc
 #define  INT_EXT			0x00000002
@@ -127,21 +136,21 @@ static char mv643xx_eth_driver_version[] = "1.1";
 /*
  * SDMA configuration register.
  */
-#define RX_BURST_SIZE_4_64BIT		(2 << 1)
+#define RX_BURST_SIZE_16_64BIT		(4 << 1)
 #define BLM_RX_NO_SWAP			(1 << 4)
 #define BLM_TX_NO_SWAP			(1 << 5)
-#define TX_BURST_SIZE_4_64BIT		(2 << 22)
+#define TX_BURST_SIZE_16_64BIT		(4 << 22)
 
 #if defined(__BIG_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
-		RX_BURST_SIZE_4_64BIT	|	\
-		TX_BURST_SIZE_4_64BIT
+		RX_BURST_SIZE_16_64BIT	|	\
+		TX_BURST_SIZE_16_64BIT
 #elif defined(__LITTLE_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
-		RX_BURST_SIZE_4_64BIT	|	\
+		RX_BURST_SIZE_16_64BIT	|	\
 		BLM_RX_NO_SWAP		|	\
 		BLM_TX_NO_SWAP		|	\
-		TX_BURST_SIZE_4_64BIT
+		TX_BURST_SIZE_16_64BIT
 #else
 #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
 #endif
@@ -153,9 +162,7 @@ static char mv643xx_eth_driver_version[] = "1.1";
 #define SET_MII_SPEED_TO_100			(1 << 24)
 #define SET_GMII_SPEED_TO_1000			(1 << 23)
 #define SET_FULL_DUPLEX_MODE			(1 << 21)
-#define MAX_RX_PACKET_1522BYTE			(1 << 17)
 #define MAX_RX_PACKET_9700BYTE			(5 << 17)
-#define MAX_RX_PACKET_MASK			(7 << 17)
 #define DISABLE_AUTO_NEG_SPEED_GMII		(1 << 13)
 #define DO_NOT_FORCE_LINK_FAIL			(1 << 10)
 #define SERIAL_PORT_CONTROL_RESERVED		(1 << 9)
@@ -228,6 +235,8 @@ struct tx_desc {
 #define GEN_IP_V4_CHECKSUM		0x00040000
 #define GEN_TCP_UDP_CHECKSUM		0x00020000
 #define UDP_FRAME			0x00010000
+#define MAC_HDR_EXTRA_4_BYTES		0x00008000
+#define MAC_HDR_EXTRA_8_BYTES		0x00000200
 
 #define TX_IHL_SHIFT			11
 
@@ -404,6 +413,17 @@ static void rxq_disable(struct rx_queue *rxq)
 		udelay(10);
 }
 
+static void txq_reset_hw_ptr(struct tx_queue *txq)
+{
+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
+	int off = TXQ_CURRENT_DESC_PTR(mp->port_num, txq->index);
+	u32 addr;
+
+	addr = (u32)txq->tx_desc_dma;
+	addr += txq->tx_curr_desc * sizeof(struct tx_desc);
+	wrl(mp, off, addr);
+}
+
 static void txq_enable(struct tx_queue *txq)
 {
 	struct mv643xx_eth_private *mp = txq_to_mp(txq);
@@ -454,11 +474,19 @@ static void rxq_refill(struct rx_queue *rxq)
 		/*
 		 * Reserve 2+14 bytes for an ethernet header (the
 		 * hardware automatically prepends 2 bytes of dummy
-		 * data to each received packet), 4 bytes for a VLAN
-		 * header, and 4 bytes for the trailing FCS -- 24
-		 * bytes total.
+		 * data to each received packet), 16 bytes for up to
+		 * four VLAN tags, and 4 bytes for the trailing FCS
+		 * -- 36 bytes total.
+		 */
+		skb_size = mp->dev->mtu + 36;
+
+		/*
+		 * Make sure that the skb size is a multiple of 8
+		 * bytes, as the lower three bits of the receive
+		 * descriptor's buffer size field are ignored by
+		 * the hardware.
 		 */
-		skb_size = mp->dev->mtu + 24;
+		skb_size = (skb_size + 7) & ~7;
 
 		skb = dev_alloc_skb(skb_size + dma_get_cache_alignment() - 1);
 		if (skb == NULL)
@@ -489,10 +517,8 @@ static void rxq_refill(struct rx_queue *rxq)
 		skb_reserve(skb, 2);
 	}
 
-	if (rxq->rx_desc_count != rxq->rx_ring_size) {
-		rxq->rx_oom.expires = jiffies + (HZ / 10);
-		add_timer(&rxq->rx_oom);
-	}
+	if (rxq->rx_desc_count != rxq->rx_ring_size)
+		mod_timer(&rxq->rx_oom, jiffies + (HZ / 10));
 
 	spin_unlock_irqrestore(&mp->lock, flags);
 }
@@ -509,7 +535,7 @@ static int rxq_process(struct rx_queue *rxq, int budget)
 	int rx;
 
 	rx = 0;
-	while (rx < budget) {
+	while (rx < budget && rxq->rx_desc_count) {
 		struct rx_desc *rx_desc;
 		unsigned int cmd_sts;
 		struct sk_buff *skb;
@@ -534,7 +560,7 @@ static int rxq_process(struct rx_queue *rxq, int budget)
 		spin_unlock_irqrestore(&mp->lock, flags);
 
 		dma_unmap_single(NULL, rx_desc->buf_ptr + 2,
-				 mp->dev->mtu + 24, DMA_FROM_DEVICE);
+				 rx_desc->buf_size, DMA_FROM_DEVICE);
 		rxq->rx_desc_count--;
 		rx++;
 
@@ -614,6 +640,12 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
 		for (i = 0; i < 8; i++)
 			if (mp->txq_mask & (1 << i))
 				txq_reclaim(mp->txq + i, 0);
+
+		if (netif_carrier_ok(mp->dev)) {
+			spin_lock_irq(&mp->lock);
+			__txq_maybe_wake(mp->txq + mp->txq_primary);
+			spin_unlock_irq(&mp->lock);
+		}
 	}
 #endif
 
@@ -624,8 +656,6 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
 
 	if (rx < budget) {
 		netif_rx_complete(mp->dev, napi);
-		wrl(mp, INT_CAUSE(mp->port_num), 0);
-		wrl(mp, INT_CAUSE_EXT(mp->port_num), 0);
 		wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_EXT);
 	}
 
@@ -706,6 +736,7 @@ static inline __be16 sum16_as_be(__sum16 sum)
 
 static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
 {
+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
 	int nr_frags = skb_shinfo(skb)->nr_frags;
 	int tx_index;
 	struct tx_desc *desc;
@@ -732,12 +763,36 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
 	desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		BUG_ON(skb->protocol != htons(ETH_P_IP));
+		int mac_hdr_len;
+
+		BUG_ON(skb->protocol != htons(ETH_P_IP) &&
+		       skb->protocol != htons(ETH_P_8021Q));
 
 		cmd_sts |= GEN_TCP_UDP_CHECKSUM |
 			   GEN_IP_V4_CHECKSUM   |
 			   ip_hdr(skb)->ihl << TX_IHL_SHIFT;
 
+		mac_hdr_len = (void *)ip_hdr(skb) - (void *)skb->data;
+		switch (mac_hdr_len - ETH_HLEN) {
+		case 0:
+			break;
+		case 4:
+			cmd_sts |= MAC_HDR_EXTRA_4_BYTES;
+			break;
+		case 8:
+			cmd_sts |= MAC_HDR_EXTRA_8_BYTES;
+			break;
+		case 12:
+			cmd_sts |= MAC_HDR_EXTRA_4_BYTES;
+			cmd_sts |= MAC_HDR_EXTRA_8_BYTES;
+			break;
+		default:
+			if (net_ratelimit())
+				dev_printk(KERN_ERR, &txq_to_mp(txq)->dev->dev,
+				   "mac header length is %d?!\n", mac_hdr_len);
+			break;
+		}
+
 		switch (ip_hdr(skb)->protocol) {
 		case IPPROTO_UDP:
 			cmd_sts |= UDP_FRAME;
@@ -759,6 +814,10 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
 	wmb();
 	desc->cmd_sts = cmd_sts;
 
+	/* clear TX_END interrupt status */
+	wrl(mp, INT_CAUSE(mp->port_num), ~(INT_TX_END_0 << txq->index));
+	rdl(mp, INT_CAUSE(mp->port_num));
+
 	/* ensure all descriptors are written before poking hardware */
 	wmb();
 	txq_enable(txq);
@@ -1112,10 +1171,28 @@ static int mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd *
 
 static int mv643xx_eth_get_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd)
 {
+	struct mv643xx_eth_private *mp = netdev_priv(dev);
+	u32 port_status;
+
+	port_status = rdl(mp, PORT_STATUS(mp->port_num));
+
 	cmd->supported = SUPPORTED_MII;
 	cmd->advertising = ADVERTISED_MII;
-	cmd->speed = SPEED_1000;
-	cmd->duplex = DUPLEX_FULL;
+	switch (port_status & PORT_SPEED_MASK) {
+	case PORT_SPEED_10:
+		cmd->speed = SPEED_10;
+		break;
+	case PORT_SPEED_100:
+		cmd->speed = SPEED_100;
+		break;
+	case PORT_SPEED_1000:
+		cmd->speed = SPEED_1000;
+		break;
+	default:
+		cmd->speed = -1;
+		break;
+	}
+	cmd->duplex = (port_status & FULL_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
 	cmd->port = PORT_MII;
 	cmd->phy_address = 0;
 	cmd->transceiver = XCVR_INTERNAL;
@@ -1539,8 +1616,11 @@ static int txq_init(struct mv643xx_eth_private *mp, int index)
 
 	tx_desc = (struct tx_desc *)txq->tx_desc_area;
 	for (i = 0; i < txq->tx_ring_size; i++) {
+		struct tx_desc *txd = tx_desc + i;
 		int nexti = (i + 1) % txq->tx_ring_size;
-		tx_desc[i].next_desc_ptr = txq->tx_desc_dma +
+
+		txd->cmd_sts = 0;
+		txd->next_desc_ptr = txq->tx_desc_dma +
 					nexti * sizeof(struct tx_desc);
 	}
 
@@ -1577,8 +1657,11 @@ static void txq_reclaim(struct tx_queue *txq, int force)
 		desc = &txq->tx_desc_area[tx_index];
 		cmd_sts = desc->cmd_sts;
 
-		if (!force && (cmd_sts & BUFFER_OWNED_BY_DMA))
-			break;
+		if (cmd_sts & BUFFER_OWNED_BY_DMA) {
+			if (!force)
+				break;
+			desc->cmd_sts = cmd_sts & ~BUFFER_OWNED_BY_DMA;
+		}
 
 		txq->tx_used_desc = (tx_index + 1) % txq->tx_ring_size;
 		txq->tx_desc_count--;
@@ -1632,49 +1715,61 @@ static void txq_deinit(struct tx_queue *txq)
 
 
 /* netdev ops and related ***************************************************/
-static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex)
+static void handle_link_event(struct mv643xx_eth_private *mp)
 {
-	u32 pscr_o;
-	u32 pscr_n;
-
-	pscr_o = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
+	struct net_device *dev = mp->dev;
+	u32 port_status;
+	int speed;
+	int duplex;
+	int fc;
+
+	port_status = rdl(mp, PORT_STATUS(mp->port_num));
+	if (!(port_status & LINK_UP)) {
+		if (netif_carrier_ok(dev)) {
+			int i;
 
-	/* clear speed, duplex and rx buffer size fields */
-	pscr_n = pscr_o & ~(SET_MII_SPEED_TO_100   |
-			    SET_GMII_SPEED_TO_1000 |
-			    SET_FULL_DUPLEX_MODE   |
-			    MAX_RX_PACKET_MASK);
+			printk(KERN_INFO "%s: link down\n", dev->name);
 
-	if (speed == SPEED_1000) {
-		pscr_n |= SET_GMII_SPEED_TO_1000 | MAX_RX_PACKET_9700BYTE;
-	} else {
-		if (speed == SPEED_100)
-			pscr_n |= SET_MII_SPEED_TO_100;
-		pscr_n |= MAX_RX_PACKET_1522BYTE;
-	}
+			netif_carrier_off(dev);
+			netif_stop_queue(dev);
 
-	if (duplex == DUPLEX_FULL)
-		pscr_n |= SET_FULL_DUPLEX_MODE;
+			for (i = 0; i < 8; i++) {
+				struct tx_queue *txq = mp->txq + i;
 
-	if (pscr_n != pscr_o) {
-		if ((pscr_o & SERIAL_PORT_ENABLE) == 0)
-			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
-		else {
-			int i;
+				if (mp->txq_mask & (1 << i)) {
+					txq_reclaim(txq, 1);
+					txq_reset_hw_ptr(txq);
+				}
+			}
+		}
+		return;
+	}
 
-			for (i = 0; i < 8; i++)
-				if (mp->txq_mask & (1 << i))
-					txq_disable(mp->txq + i);
+	switch (port_status & PORT_SPEED_MASK) {
+	case PORT_SPEED_10:
+		speed = 10;
+		break;
+	case PORT_SPEED_100:
+		speed = 100;
+		break;
+	case PORT_SPEED_1000:
+		speed = 1000;
+		break;
+	default:
+		speed = -1;
+		break;
+	}
+	duplex = (port_status & FULL_DUPLEX) ? 1 : 0;
+	fc = (port_status & FLOW_CONTROL_ENABLED) ? 1 : 0;
 
-			pscr_o &= ~SERIAL_PORT_ENABLE;
-			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_o);
-			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
-			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
+	printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
+			 "flow control %sabled\n", dev->name,
+			 speed, duplex ? "full" : "half",
+			 fc ? "en" : "dis");
 
-			for (i = 0; i < 8; i++)
-				if (mp->txq_mask & (1 << i))
-					txq_enable(mp->txq + i);
-		}
+	if (!netif_carrier_ok(dev)) {
+		netif_carrier_on(dev);
+		netif_wake_queue(dev);
 	}
 }
 
@@ -1684,7 +1779,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 	struct mv643xx_eth_private *mp = netdev_priv(dev);
 	u32 int_cause;
 	u32 int_cause_ext;
-	u32 txq_active;
 
 	int_cause = rdl(mp, INT_CAUSE(mp->port_num)) &
 			(INT_TX_END | INT_RX | INT_EXT);
@@ -1698,36 +1792,15 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 		wrl(mp, INT_CAUSE_EXT(mp->port_num), ~int_cause_ext);
 	}
 
-	if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) {
-		if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) {
-			int i;
-
-			if (mp->phy_addr != -1) {
-				struct ethtool_cmd cmd;
-
-				mii_ethtool_gset(&mp->mii, &cmd);
-				update_pscr(mp, cmd.speed, cmd.duplex);
-			}
-
-			for (i = 0; i < 8; i++)
-				if (mp->txq_mask & (1 << i))
-					txq_enable(mp->txq + i);
-
-			if (!netif_carrier_ok(dev)) {
-				netif_carrier_on(dev);
-				__txq_maybe_wake(mp->txq + mp->txq_primary);
-			}
-		} else if (netif_carrier_ok(dev)) {
-			netif_stop_queue(dev);
-			netif_carrier_off(dev);
-		}
-	}
+	if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK))
+		handle_link_event(mp);
 
 	/*
 	 * RxBuffer or RxError set for any of the 8 queues?
 	 */
 #ifdef MV643XX_ETH_NAPI
 	if (int_cause & INT_RX) {
+		wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_RX));
 		wrl(mp, INT_MASK(mp->port_num), 0x00000000);
 		rdl(mp, INT_MASK(mp->port_num));
 
@@ -1743,8 +1816,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 	}
 #endif
 
-	txq_active = rdl(mp, TXQ_COMMAND(mp->port_num));
-
 	/*
 	 * TxBuffer or TxError set for any of the 8 queues?
 	 */
@@ -1754,6 +1825,16 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 		for (i = 0; i < 8; i++)
 			if (mp->txq_mask & (1 << i))
 				txq_reclaim(mp->txq + i, 0);
+
+		/*
+		 * Enough space again in the primary TX queue for a
+		 * full packet?
+		 */
+		if (netif_carrier_ok(dev)) {
+			spin_lock(&mp->lock);
+			__txq_maybe_wake(mp->txq + mp->txq_primary);
+			spin_unlock(&mp->lock);
+		}
 	}
 
 	/*
@@ -1763,19 +1844,25 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 		int i;
 
 		wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_TX_END));
+
+		spin_lock(&mp->lock);
 		for (i = 0; i < 8; i++) {
 			struct tx_queue *txq = mp->txq + i;
-			if (txq->tx_desc_count && !((txq_active >> i) & 1))
+			u32 hw_desc_ptr;
+			u32 expected_ptr;
+
+			if ((int_cause & (INT_TX_END_0 << i)) == 0)
+				continue;
+
+			hw_desc_ptr =
+				rdl(mp, TXQ_CURRENT_DESC_PTR(mp->port_num, i));
+			expected_ptr = (u32)txq->tx_desc_dma +
+				txq->tx_curr_desc * sizeof(struct tx_desc);
+
+			if (hw_desc_ptr != expected_ptr)
 				txq_enable(txq);
 		}
-	}
-
-	/*
-	 * Enough space again in the primary TX queue for a full packet?
-	 */
-	if (int_cause_ext & INT_EXT_TX) {
-		struct tx_queue *txq = mp->txq + mp->txq_primary;
-		__txq_maybe_wake(txq);
+		spin_unlock(&mp->lock);
 	}
 
 	return IRQ_HANDLED;
@@ -1785,14 +1872,14 @@ static void phy_reset(struct mv643xx_eth_private *mp)
 {
 	unsigned int data;
 
-	smi_reg_read(mp, mp->phy_addr, 0, &data);
-	data |= 0x8000;
-	smi_reg_write(mp, mp->phy_addr, 0, data);
+	smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+	data |= BMCR_RESET;
+	smi_reg_write(mp, mp->phy_addr, MII_BMCR, data);
 
 	do {
 		udelay(1);
-		smi_reg_read(mp, mp->phy_addr, 0, &data);
-	} while (data & 0x8000);
+		smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+	} while (data & BMCR_RESET);
 }
 
 static void port_start(struct mv643xx_eth_private *mp)
@@ -1801,23 +1888,6 @@ static void port_start(struct mv643xx_eth_private *mp)
 	int i;
 
 	/*
-	 * Configure basic link parameters.
-	 */
-	pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
-	pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS);
-	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-	pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
-		DISABLE_AUTO_NEG_SPEED_GMII    |
-		DISABLE_AUTO_NEG_FOR_DUPLEX    |
-		DO_NOT_FORCE_LINK_FAIL	       |
-		SERIAL_PORT_CONTROL_RESERVED;
-	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-	pscr |= SERIAL_PORT_ENABLE;
-	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-
-	wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE);
-
-	/*
 	 * Perform PHY reset, if there is a PHY.
 	 */
 	if (mp->phy_addr != -1) {
@@ -1829,21 +1899,31 @@ static void port_start(struct mv643xx_eth_private *mp)
 	}
 
 	/*
+	 * Configure basic link parameters.
+	 */
+	pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
+
+	pscr |= SERIAL_PORT_ENABLE;
+	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+
+	pscr |= DO_NOT_FORCE_LINK_FAIL;
+	if (mp->phy_addr == -1)
+		pscr |= FORCE_LINK_PASS;
+	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+
+	wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE);
+
+	/*
 	 * Configure TX path and queues.
 	 */
 	tx_set_rate(mp, 1000000000, 16777216);
 	for (i = 0; i < 8; i++) {
 		struct tx_queue *txq = mp->txq + i;
-		int off = TXQ_CURRENT_DESC_PTR(mp->port_num, i);
-		u32 addr;
 
 		if ((mp->txq_mask & (1 << i)) == 0)
 			continue;
 
-		addr = (u32)txq->tx_desc_dma;
-		addr += txq->tx_curr_desc * sizeof(struct tx_desc);
-		wrl(mp, off, addr);
-
+		txq_reset_hw_ptr(txq);
 		txq_set_rate(txq, 1000000000, 16777216);
 		txq_set_fixed_prio_mode(txq);
 	}
@@ -1965,6 +2045,9 @@ static int mv643xx_eth_open(struct net_device *dev)
 	napi_enable(&mp->napi);
 #endif
 
+	netif_carrier_off(dev);
+	netif_stop_queue(dev);
+
 	port_start(mp);
 
 	set_rx_coal(mp, 0);
@@ -1999,8 +2082,14 @@ static void port_reset(struct mv643xx_eth_private *mp)
 		if (mp->txq_mask & (1 << i))
 			txq_disable(mp->txq + i);
 	}
-	while (!(rdl(mp, PORT_STATUS(mp->port_num)) & TX_FIFO_EMPTY))
+
+	while (1) {
+		u32 ps = rdl(mp, PORT_STATUS(mp->port_num));
+
+		if ((ps & (TX_IN_PROGRESS | TX_FIFO_EMPTY)) == TX_FIFO_EMPTY)
+			break;
 		udelay(10);
+	}
 
 	/* Reset the Enable bit in the Configuration Register */
 	data = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
@@ -2202,7 +2291,8 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 	int ret;
 
 	if (!mv643xx_eth_version_printed++)
-		printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n");
+		printk(KERN_NOTICE "MV-643xx 10/100/1000 ethernet "
+			"driver version %s\n", mv643xx_eth_driver_version);
 
 	ret = -EINVAL;
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -2338,14 +2428,14 @@ static int phy_detect(struct mv643xx_eth_private *mp)
 	unsigned int data;
 	unsigned int data2;
 
-	smi_reg_read(mp, mp->phy_addr, 0, &data);
-	smi_reg_write(mp, mp->phy_addr, 0, data ^ 0x1000);
+	smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+	smi_reg_write(mp, mp->phy_addr, MII_BMCR, data ^ BMCR_ANENABLE);
 
-	smi_reg_read(mp, mp->phy_addr, 0, &data2);
-	if (((data ^ data2) & 0x1000) == 0)
+	smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data2);
+	if (((data ^ data2) & BMCR_ANENABLE) == 0)
 		return -ENODEV;
 
-	smi_reg_write(mp, mp->phy_addr, 0, data);
+	smi_reg_write(mp, mp->phy_addr, MII_BMCR, data);
 
 	return 0;
 }
@@ -2393,12 +2483,39 @@ static int phy_init(struct mv643xx_eth_private *mp,
 		cmd.duplex = pd->duplex;
 	}
 
-	update_pscr(mp, cmd.speed, cmd.duplex);
 	mv643xx_eth_set_settings(mp->dev, &cmd);
 
 	return 0;
 }
 
+static void init_pscr(struct mv643xx_eth_private *mp, int speed, int duplex)
+{
+	u32 pscr;
+
+	pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
+	if (pscr & SERIAL_PORT_ENABLE) {
+		pscr &= ~SERIAL_PORT_ENABLE;
+		wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+	}
+
+	pscr = MAX_RX_PACKET_9700BYTE | SERIAL_PORT_CONTROL_RESERVED;
+	if (mp->phy_addr == -1) {
+		pscr |= DISABLE_AUTO_NEG_SPEED_GMII;
+		if (speed == SPEED_1000)
+			pscr |= SET_GMII_SPEED_TO_1000;
+		else if (speed == SPEED_100)
+			pscr |= SET_MII_SPEED_TO_100;
+
+		pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL;
+
+		pscr |= DISABLE_AUTO_NEG_FOR_DUPLEX;
+		if (duplex == DUPLEX_FULL)
+			pscr |= SET_FULL_DUPLEX_MODE;
+	}
+
+	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+}
+
 static int mv643xx_eth_probe(struct platform_device *pdev)
 {
 	struct mv643xx_eth_platform_data *pd;
@@ -2452,6 +2569,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 	} else {
 		SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops_phyless);
 	}
+	init_pscr(mp, pd->speed, pd->duplex);
 
 
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -2478,6 +2596,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 	 * have to map the buffers to ISA memory which is only 16 MB
 	 */
 	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
+	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM;
 #endif
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 3ab0e5289f7..d6524db321a 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -56,7 +56,6 @@
 #include <linux/ethtool.h>
 #include <linux/firmware.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 #include <linux/timer.h>
 #include <linux/vmalloc.h>
 #include <linux/crc32.h>
@@ -76,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.3.99-1.347"
+#define MYRI10GE_VERSION_STR "1.4.3-1.358"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -3548,7 +3547,11 @@ static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
 
 	/* try to load the slice aware rss firmware */
 	old_fw = mgp->fw_name;
-	if (old_fw == myri10ge_fw_aligned)
+	if (myri10ge_fw_name != NULL) {
+		dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
+			 myri10ge_fw_name);
+		mgp->fw_name = myri10ge_fw_name;
+	} else if (old_fw == myri10ge_fw_aligned)
 		mgp->fw_name = myri10ge_fw_rss_aligned;
 	else
 		mgp->fw_name = myri10ge_fw_rss_unaligned;
@@ -3699,6 +3702,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
 		goto abort_with_netdev;
 	}
+	(void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
 	mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
 				      &mgp->cmd_bus, GFP_KERNEL);
 	if (mgp->cmd == NULL)
diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h
index fdbeeee0737..99372109077 100644
--- a/drivers/net/myri10ge/myri10ge_mcp.h
+++ b/drivers/net/myri10ge/myri10ge_mcp.h
@@ -101,6 +101,8 @@ struct mcp_kreq_ether_recv {
 #define	MXGEFW_ETH_SEND_3	0x2c0000
 #define	MXGEFW_ETH_RECV_SMALL	0x300000
 #define	MXGEFW_ETH_RECV_BIG	0x340000
+#define	MXGEFW_ETH_SEND_GO	0x380000
+#define	MXGEFW_ETH_SEND_STOP	0x3C0000
 
 #define	MXGEFW_ETH_SEND(n)		(0x200000 + (((n) & 0x03) * 0x40000))
 #define	MXGEFW_ETH_SEND_OFFSET(n)	(MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)
@@ -120,6 +122,11 @@ enum myri10ge_mcp_cmd_type {
 	 * MXGEFW_CMD_RESET is issued */
 
 	MXGEFW_CMD_SET_INTRQ_DMA,
+	/* data0 = LSW of the host address
+	 * data1 = MSW of the host address
+	 * data2 = slice number if multiple slices are used
+	 */
+
 	MXGEFW_CMD_SET_BIG_BUFFER_SIZE,	/* in bytes, power of 2 */
 	MXGEFW_CMD_SET_SMALL_BUFFER_SIZE,	/* in bytes */
 
@@ -129,6 +136,8 @@ enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_GET_SEND_OFFSET,
 	MXGEFW_CMD_GET_SMALL_RX_OFFSET,
 	MXGEFW_CMD_GET_BIG_RX_OFFSET,
+	/* data0 = slice number if multiple slices are used */
+
 	MXGEFW_CMD_GET_IRQ_ACK_OFFSET,
 	MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
 
@@ -200,7 +209,12 @@ enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_SET_STATS_DMA_V2,
 	/* data0, data1 = bus addr,
 	 * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
-	 * adding new stuff to mcp_irq_data without changing the ABI */
+	 * adding new stuff to mcp_irq_data without changing the ABI
+	 *
+	 * If multiple slices are used, data2 contains both the size of the
+	 * structure (in the lower 16 bits) and the slice number
+	 * (in the upper 16 bits).
+	 */
 
 	MXGEFW_CMD_UNALIGNED_TEST,
 	/* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
@@ -222,13 +236,18 @@ enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_GET_MAX_RSS_QUEUES,
 	MXGEFW_CMD_ENABLE_RSS_QUEUES,
 	/* data0 = number of slices n (0, 1, ..., n-1) to enable
-	 * data1 = interrupt mode.
-	 * 0=share one INTx/MSI, 1=use one MSI-X per queue.
+	 * data1 = interrupt mode | use of multiple transmit queues.
+	 * 0=share one INTx/MSI.
+	 * 1=use one MSI-X per queue.
 	 * If all queues share one interrupt, the driver must have set
 	 * RSS_SHARED_INTERRUPT_DMA before enabling queues.
+	 * 2=enable both receive and send queues.
+	 * Without this bit set, only one send queue (slice 0's send queue)
+	 * is enabled.  The receive queues are always enabled.
 	 */
-#define MXGEFW_SLICE_INTR_MODE_SHARED 0
-#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 1
+#define MXGEFW_SLICE_INTR_MODE_SHARED          0x0
+#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE   0x1
+#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2
 
 	MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET,
 	MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA,
@@ -250,10 +269,13 @@ enum myri10ge_mcp_cmd_type {
 	 * 2: TCP_IPV4        (required by RSS)
 	 * 3: IPV4 | TCP_IPV4 (required by RSS)
 	 * 4: source port
+	 * 5: source port + destination port
 	 */
 #define MXGEFW_RSS_HASH_TYPE_IPV4      0x1
 #define MXGEFW_RSS_HASH_TYPE_TCP_IPV4  0x2
 #define MXGEFW_RSS_HASH_TYPE_SRC_PORT  0x4
+#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5
+#define MXGEFW_RSS_HASH_TYPE_MAX 0x5
 
 	MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
 	/* Return data = the max. size of the entire headers of a IPv6 TSO packet.
@@ -329,6 +351,20 @@ enum myri10ge_mcp_cmd_type {
 
 	MXGEFW_CMD_GET_DCA_OFFSET,
 	/* offset of dca control for WDMAs */
+
+	/* VMWare NetQueue commands */
+	MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE,
+	MXGEFW_CMD_NETQ_ADD_FILTER,
+	/* data0 = filter_id << 16 | queue << 8 | type */
+	/* data1 = MS4 of MAC Addr */
+	/* data2 = LS2_MAC << 16 | VLAN_tag */
+	MXGEFW_CMD_NETQ_DEL_FILTER,
+	/* data0 = filter_id */
+	MXGEFW_CMD_NETQ_QUERY1,
+	MXGEFW_CMD_NETQ_QUERY2,
+	MXGEFW_CMD_NETQ_QUERY3,
+	MXGEFW_CMD_NETQ_QUERY4,
+
 };
 
 enum myri10ge_mcp_cmd_status {
@@ -381,4 +417,10 @@ struct mcp_irq_data {
 	u8 valid;
 };
 
+/* definitions for NETQ filter type */
+#define MXGEFW_NETQ_FILTERTYPE_NONE 0
+#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1
+#define MXGEFW_NETQ_FILTERTYPE_VLAN 2
+#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3
+
 #endif				/* __MYRI10GE_MCP_H__ */
diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
index 07d65c2cbb2..a8662ea8079 100644
--- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
@@ -35,7 +35,7 @@ struct mcp_gen_header {
 	unsigned char mcp_index;
 	unsigned char disable_rabbit;
 	unsigned char unaligned_tlp;
-	unsigned char pad1;
+	unsigned char pcie_link_algo;
 	unsigned counters_addr;
 	unsigned copy_block_info;	/* for small mcps loaded with "lload -d" */
 	unsigned short handoff_id_major;	/* must be equal */
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 2fec6122c7f..fa3ceca4e15 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -118,7 +118,7 @@ bad_clone_list[] __initdata = {
     {"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */
     {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */
     {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+#ifdef CONFIG_MACH_TX49XX
     {"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}},  /* Toshiba built-in */
 #endif
     {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */
@@ -142,7 +142,7 @@ bad_clone_list[] __initdata = {
 #if defined(CONFIG_PLAT_MAPPI)
 #  define DCR_VAL 0x4b
 #elif defined(CONFIG_PLAT_OAKS32R)  || \
-   defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+   defined(CONFIG_MACH_TX49XX)
 #  define DCR_VAL 0x48		/* 8-bit mode */
 #else
 #  define DCR_VAL 0x49
@@ -536,7 +536,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	dev->poll_controller = eip_poll;
 #endif
-	NS8390_init(dev, 0);
+	NS8390p_init(dev, 0);
 
 	ret = register_netdev(dev);
 	if (ret)
@@ -794,7 +794,7 @@ retry:
 		if (time_after(jiffies, dma_start + 2*HZ/100)) {		/* 20ms */
 			printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
 			ne_reset_8390(dev);
-			NS8390_init(dev,1);
+			NS8390p_init(dev, 1);
 			break;
 		}
 
@@ -855,7 +855,7 @@ static int ne_drv_resume(struct platform_device *pdev)
 
 	if (netif_running(dev)) {
 		ne_reset_8390(dev);
-		NS8390_init(dev, 1);
+		NS8390p_init(dev, 1);
 		netif_device_attach(dev);
 	}
 	return 0;
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index e13966bb5f7..9681618c323 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -53,7 +53,7 @@ MODULE_LICENSE("GPL");
 
 static char config[MAX_PARAM_LENGTH];
 module_param_string(netconsole, config, MAX_PARAM_LENGTH, 0);
-MODULE_PARM_DESC(netconsole, " netconsole=[src-port]@[src-ip]/[dev],[tgt-port]@<tgt-ip>/[tgt-macaddr]\n");
+MODULE_PARM_DESC(netconsole, " netconsole=[src-port]@[src-ip]/[dev],[tgt-port]@<tgt-ip>/[tgt-macaddr]");
 
 #ifndef	MODULE
 static int __init option_setup(char *opt)
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index dc442e37085..3f9af759cb9 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -29,12 +29,11 @@
 #include <linux/mii.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/pfifo.h>
-#include <asm/arch/xc.h>
-#include <asm/arch/eth.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/pfifo.h>
+#include <mach/xc.h>
+#include <mach/eth.h>
 
 /* XC Fifo Offsets */
 #define EMPTY_PTR_FIFO(xcno)    (0 + ((xcno) << 3))	/* Index of the empty pointer FIFO */
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 8e736614407..244ab49c433 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -45,7 +45,6 @@
 #include <linux/in.h>
 #include <linux/tcp.h>
 #include <linux/skbuff.h>
-#include <linux/version.h>
 
 #include <linux/ethtool.h>
 #include <linux/mii.h>
@@ -66,8 +65,8 @@
 
 #define _NETXEN_NIC_LINUX_MAJOR 4
 #define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 0
-#define NETXEN_NIC_LINUX_VERSIONID  "4.0.0"
+#define _NETXEN_NIC_LINUX_SUBVERSION 11
+#define NETXEN_NIC_LINUX_VERSIONID  "4.0.11"
 
 #define NETXEN_VERSION_CODE(a, b, c)	(((a) << 16) + ((b) << 8) + (c))
 
@@ -508,6 +507,8 @@ typedef enum {
 	NETXEN_BRDTYPE_P3_10000_BASE_T = 0x0027,
 	NETXEN_BRDTYPE_P3_XG_LOM = 0x0028,
 	NETXEN_BRDTYPE_P3_4_GB_MM = 0x0029,
+	NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a,
+	NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b,
 	NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
 	NETXEN_BRDTYPE_P3_10G_XFP = 0x0032
 
@@ -1170,6 +1171,36 @@ typedef struct {
 	nx_nic_intr_coalesce_data_t	irq;
 } nx_nic_intr_coalesce_t;
 
+#define NX_HOST_REQUEST		0x13
+#define NX_NIC_REQUEST		0x14
+
+#define NX_MAC_EVENT		0x1
+
+enum {
+	NX_NIC_H2C_OPCODE_START = 0,
+	NX_NIC_H2C_OPCODE_CONFIG_RSS,
+	NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL,
+	NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE,
+	NX_NIC_H2C_OPCODE_CONFIG_LED,
+	NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS,
+	NX_NIC_H2C_OPCODE_CONFIG_L2_MAC,
+	NX_NIC_H2C_OPCODE_LRO_REQUEST,
+	NX_NIC_H2C_OPCODE_GET_SNMP_STATS,
+	NX_NIC_H2C_OPCODE_PROXY_START_REQUEST,
+	NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST,
+	NX_NIC_H2C_OPCODE_PROXY_SET_MTU,
+	NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE,
+	NX_H2P_OPCODE_GET_FINGER_PRINT_REQUEST,
+	NX_H2P_OPCODE_INSTALL_LICENSE_REQUEST,
+	NX_H2P_OPCODE_GET_LICENSE_CAPABILITY_REQUEST,
+	NX_NIC_H2C_OPCODE_GET_NET_STATS,
+	NX_NIC_H2C_OPCODE_LAST
+};
+
+#define VPORT_MISS_MODE_DROP		0 /* drop all unmatched */
+#define VPORT_MISS_MODE_ACCEPT_ALL	1 /* accept all packets */
+#define VPORT_MISS_MODE_ACCEPT_MULTI	2 /* accept unmatched multicast */
+
 typedef struct {
 	u64 qhdr;
 	u64 req_hdr;
@@ -1288,7 +1319,7 @@ struct netxen_adapter {
 	int (*disable_phy_interrupts) (struct netxen_adapter *);
 	int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t);
 	int (*set_mtu) (struct netxen_adapter *, int);
-	int (*set_promisc) (struct netxen_adapter *, netxen_niu_prom_mode_t);
+	int (*set_promisc) (struct netxen_adapter *, u32);
 	int (*phy_read) (struct netxen_adapter *, long reg, u32 *);
 	int (*phy_write) (struct netxen_adapter *, long reg, u32 val);
 	int (*init_port) (struct netxen_adapter *, int);
@@ -1465,9 +1496,10 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter);
 u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
 void netxen_p2_nic_set_multi(struct net_device *netdev);
 void netxen_p3_nic_set_multi(struct net_device *netdev);
+int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
 
-u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu);
+int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu);
 int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
 
 int netxen_nic_set_mac(struct net_device *netdev, void *p);
@@ -1502,7 +1534,9 @@ static const struct netxen_brdinfo netxen_boards[] = {
 	{NETXEN_BRDTYPE_P3_10G_SFP_PLUS, 2, "Dual XGb SFP+ LP"},
 	{NETXEN_BRDTYPE_P3_10000_BASE_T, 1, "XGB 10G BaseT LP"},
 	{NETXEN_BRDTYPE_P3_XG_LOM,  2, "Dual XGb LOM"},
-	{NETXEN_BRDTYPE_P3_4_GB_MM, 4, "Quad GB - March Madness"},
+	{NETXEN_BRDTYPE_P3_4_GB_MM, 4, "NX3031 Gigabit Ethernet"},
+	{NETXEN_BRDTYPE_P3_10G_SFP_CT, 2, "NX3031 10 Gigabit Ethernet"},
+	{NETXEN_BRDTYPE_P3_10G_SFP_QT, 2, "Quanta Dual XGb SFP+"},
 	{NETXEN_BRDTYPE_P3_10G_CX4, 2, "Reference Dual CX4 Option"},
 	{NETXEN_BRDTYPE_P3_10G_XFP, 1, "Reference Single XFP Option"}
 };
@@ -1580,7 +1614,8 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter)
 
 
 int netxen_is_flash_supported(struct netxen_adapter *adapter);
-int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 mac[]);
+int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
+int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
 extern void netxen_change_ringparam(struct netxen_adapter *adapter);
 extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr,
 				int *valp);
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 64babc59e69..64b51643c62 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -145,8 +145,8 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
 	return rcode;
 }
 
-u32
-nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu)
+int
+nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu)
 {
 	u32 rcode = NX_RCODE_SUCCESS;
 	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx[0];
@@ -160,7 +160,10 @@ nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu)
 				0,
 				NX_CDRP_CMD_SET_MTU);
 
-	return rcode;
+	if (rcode != NX_RCODE_SUCCESS)
+		return -EIO;
+
+	return 0;
 }
 
 static int
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 48ee06b6f4e..b974ca0fc53 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -38,7 +38,6 @@
 #include <asm/io.h>
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
-#include <linux/version.h>
 
 #include "netxen_nic.h"
 #include "netxen_nic_hw.h"
@@ -140,18 +139,33 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		if (netif_running(dev)) {
 			ecmd->speed = adapter->link_speed;
 			ecmd->duplex = adapter->link_duplex;
-		} else
-			return -EIO;	/* link absent */
+			ecmd->autoneg = adapter->link_autoneg;
+		}
+
 	} else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
-		ecmd->supported = (SUPPORTED_TP |
-				   SUPPORTED_1000baseT_Full |
-				   SUPPORTED_10000baseT_Full);
-		ecmd->advertising = (ADVERTISED_TP |
-				     ADVERTISED_1000baseT_Full |
-				     ADVERTISED_10000baseT_Full);
+		u32 val;
+
+		adapter->hw_read_wx(adapter, NETXEN_PORT_MODE_ADDR, &val, 4);
+		if (val == NETXEN_PORT_MODE_802_3_AP) {
+			ecmd->supported = SUPPORTED_1000baseT_Full;
+			ecmd->advertising = ADVERTISED_1000baseT_Full;
+		} else {
+			ecmd->supported = SUPPORTED_10000baseT_Full;
+			ecmd->advertising = ADVERTISED_10000baseT_Full;
+		}
+
 		ecmd->port = PORT_TP;
 
-		ecmd->speed = SPEED_10000;
+		if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+			u16 pcifn = adapter->ahw.pci_func;
+
+			adapter->hw_read_wx(adapter,
+				P3_LINK_SPEED_REG(pcifn), &val, 4);
+			ecmd->speed = P3_LINK_SPEED_MHZ *
+					P3_LINK_SPEED_VAL(pcifn, val);
+		} else
+			ecmd->speed = SPEED_10000;
+
 		ecmd->duplex = DUPLEX_FULL;
 		ecmd->autoneg = AUTONEG_DISABLE;
 	} else
@@ -192,6 +206,8 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		break;
 	case NETXEN_BRDTYPE_P2_SB31_10G:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
+	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 		ecmd->supported |= SUPPORTED_FIBRE;
 		ecmd->advertising |= ADVERTISED_FIBRE;
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 3ce13e451aa..e80f9e3e597 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -32,8 +32,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
-
 #include <linux/spinlock.h>
 #include <asm/irq.h>
 #include <linux/init.h>
@@ -724,6 +722,13 @@ enum {
 #define XG_LINK_STATE_P3(pcifn,val) \
 	(((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3_MASK)
 
+#define P3_LINK_SPEED_MHZ	100
+#define P3_LINK_SPEED_MASK	0xff
+#define P3_LINK_SPEED_REG(pcifn)	\
+	(CRB_PF_LINK_SPEED_1 + (((pcifn) / 4) * 4))
+#define P3_LINK_SPEED_VAL(pcifn, reg)	\
+	(((reg) >> (8 * ((pcifn) & 0x3))) & P3_LINK_SPEED_MASK)
+
 #define NETXEN_CAM_RAM_BASE	(NETXEN_CRB_CAM + 0x02000)
 #define NETXEN_CAM_RAM(reg)	(NETXEN_CAM_RAM_BASE + (reg))
 #define NETXEN_FW_VERSION_MAJOR (NETXEN_CAM_RAM(0x150))
@@ -836,9 +841,11 @@ enum {
 
 #define PCIE_SETUP_FUNCTION	(0x12040)
 #define PCIE_SETUP_FUNCTION2	(0x12048)
+#define PCIE_MISCCFG_RC         (0x1206c)
 #define PCIE_TGT_SPLIT_CHICKEN	(0x12080)
 #define PCIE_CHICKEN3		(0x120c8)
 
+#define ISR_INT_STATE_REG       (NETXEN_PCIX_PS_REG(PCIE_MISCCFG_RC))
 #define PCIE_MAX_MASTER_SPLIT	(0x14048)
 
 #define NETXEN_PORT_MODE_NONE		0
@@ -854,6 +861,7 @@ enum {
 #define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL		(0x14)
 
 #define	ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
+#define ISR_LEGACY_INT_TRIGGERED(VAL)	(((VAL) & 0x300) == 0x200)
 
 /*
  * PCI Interrupt Vector Values.
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 96a3bc6426e..84978f80f39 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -285,14 +285,7 @@ static unsigned crb_hub_agt[64] =
 #define ADDR_IN_RANGE(addr, low, high)	\
 	(((addr) <= (high)) && ((addr) >= (low)))
 
-#define NETXEN_MAX_MTU		8000 + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE
-#define NETXEN_MIN_MTU		64
-#define NETXEN_ETH_FCS_SIZE     4
-#define NETXEN_ENET_HEADER_SIZE 14
 #define NETXEN_WINDOW_ONE 	0x2000000 /*CRB Window: bit 25 of CRB address */
-#define NETXEN_FIRMWARE_LEN 	((16 * 1024) / 4)
-#define NETXEN_NIU_HDRSIZE	(0x1 << 6)
-#define NETXEN_NIU_TLRSIZE	(0x1 << 5)
 
 #define NETXEN_NIC_ZERO_PAUSE_ADDR     0ULL
 #define NETXEN_NIC_UNIT_PAUSE_ADDR     0x200ULL
@@ -541,9 +534,6 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 	return 0;
 }
 
-#define NIC_REQUEST		0x14
-#define NETXEN_MAC_EVENT	0x1
-
 static int nx_p3_sre_macaddr_change(struct net_device *dev,
 		u8 *addr, unsigned op)
 {
@@ -553,8 +543,8 @@ static int nx_p3_sre_macaddr_change(struct net_device *dev,
 	int rv;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
-	req.qhdr |= (NIC_REQUEST << 23);
-	req.req_hdr |= NETXEN_MAC_EVENT;
+	req.qhdr |= (NX_NIC_REQUEST << 23);
+	req.req_hdr |= NX_MAC_EVENT;
 	req.req_hdr |= ((u64)adapter->portnum << 16);
 	mac_req.op = op;
 	memcpy(&mac_req.mac_addr, addr, 6);
@@ -575,31 +565,35 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 	nx_mac_list_t *cur, *next, *del_list, *add_list = NULL;
 	struct dev_mc_list *mc_ptr;
 	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
-	adapter->set_promisc(adapter, NETXEN_NIU_PROMISC_MODE);
-
-	/*
-	 * Programming mac addresses will automaticly enabling L2 filtering.
-	 * HW will replace timestamp with L2 conid when L2 filtering is
-	 * enabled. This causes problem for LSA. Do not enabling L2 filtering
-	 * until that problem is fixed.
-	 */
-	if ((netdev->flags & IFF_PROMISC) ||
-			(netdev->mc_count > adapter->max_mc_count))
-		return;
+	u32 mode = VPORT_MISS_MODE_DROP;
 
 	del_list = adapter->mac_list;
 	adapter->mac_list = NULL;
 
 	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list);
+	nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
+
+	if (netdev->flags & IFF_PROMISC) {
+		mode = VPORT_MISS_MODE_ACCEPT_ALL;
+		goto send_fw_cmd;
+	}
+
+	if ((netdev->flags & IFF_ALLMULTI) ||
+			(netdev->mc_count > adapter->max_mc_count)) {
+		mode = VPORT_MISS_MODE_ACCEPT_MULTI;
+		goto send_fw_cmd;
+	}
+
 	if (netdev->mc_count > 0) {
-		nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
 		for (mc_ptr = netdev->mc_list; mc_ptr;
 		     mc_ptr = mc_ptr->next) {
 			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr,
 					  &add_list, &del_list);
 		}
 	}
+
+send_fw_cmd:
+	adapter->set_promisc(adapter, mode);
 	for (cur = del_list; cur;) {
 		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL);
 		next = cur->next;
@@ -615,6 +609,21 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 	}
 }
 
+int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
+{
+	nx_nic_req_t req;
+
+	memset(&req, 0, sizeof(nx_nic_req_t));
+
+	req.qhdr |= (NX_HOST_REQUEST << 23);
+	req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE;
+	req.req_hdr |= ((u64)adapter->portnum << 16);
+	req.words[0] = cpu_to_le64(mode);
+
+	return netxen_send_cmd_descs(adapter,
+				(struct cmd_desc_type0 *)&req, 1);
+}
+
 #define	NETXEN_CONFIG_INTR_COALESCE	3
 
 /*
@@ -627,7 +636,7 @@ int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
 
-	req.qhdr |= (NIC_REQUEST << 23);
+	req.qhdr |= (NX_NIC_REQUEST << 23);
 	req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE;
 	req.req_hdr |= ((u64)adapter->portnum << 16);
 
@@ -653,6 +662,7 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
 	int max_mtu;
+	int rc = 0;
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		max_mtu = P3_MAX_MTU;
@@ -666,16 +676,12 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
 	}
 
 	if (adapter->set_mtu)
-		adapter->set_mtu(adapter, mtu);
-	netdev->mtu = mtu;
+		rc = adapter->set_mtu(adapter, mtu);
 
-	mtu += MTU_FUDGE_FACTOR;
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		nx_fw_cmd_set_mtu(adapter, mtu);
-	else if (adapter->set_mtu)
-		adapter->set_mtu(adapter, mtu);
+	if (!rc)
+		netdev->mtu = mtu;
 
-	return 0;
+	return rc;
 }
 
 int netxen_is_flash_supported(struct netxen_adapter *adapter)
@@ -727,31 +733,56 @@ static int netxen_get_flash_block(struct netxen_adapter *adapter, int base,
 	return 0;
 }
 
-int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 mac[])
+int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
 {
-	__le32 *pmac = (__le32 *) & mac[0];
+	__le32 *pmac = (__le32 *) mac;
+	u32 offset;
+
+	offset = NETXEN_USER_START +
+		offsetof(struct netxen_new_user_info, mac_addr) +
+		adapter->portnum * sizeof(u64);
 
-	if (netxen_get_flash_block(adapter,
-				   NETXEN_USER_START +
-				   offsetof(struct netxen_new_user_info,
-					    mac_addr),
-				   FLASH_NUM_PORTS * sizeof(u64), pmac) == -1) {
+	if (netxen_get_flash_block(adapter, offset, sizeof(u64), pmac) == -1)
 		return -1;
-	}
+
 	if (*mac == cpu_to_le64(~0ULL)) {
+
+		offset = NETXEN_USER_START_OLD +
+			offsetof(struct netxen_user_old_info, mac_addr) +
+			adapter->portnum * sizeof(u64);
+
 		if (netxen_get_flash_block(adapter,
-					   NETXEN_USER_START_OLD +
-					   offsetof(struct netxen_user_old_info,
-						    mac_addr),
-					   FLASH_NUM_PORTS * sizeof(u64),
-					   pmac) == -1)
+					offset, sizeof(u64), pmac) == -1)
 			return -1;
+
 		if (*mac == cpu_to_le64(~0ULL))
 			return -1;
 	}
 	return 0;
 }
 
+int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
+{
+	uint32_t crbaddr, mac_hi, mac_lo;
+	int pci_func = adapter->ahw.pci_func;
+
+	crbaddr = CRB_MAC_BLOCK_START +
+		(4 * ((pci_func/2) * 3)) + (4 * (pci_func & 1));
+
+	adapter->hw_read_wx(adapter, crbaddr, &mac_lo, 4);
+	adapter->hw_read_wx(adapter, crbaddr+4, &mac_hi, 4);
+
+	mac_hi = cpu_to_le32(mac_hi);
+	mac_lo = cpu_to_le32(mac_lo);
+
+	if (pci_func & 1)
+		*mac = ((mac_lo >> 16) | ((u64)mac_hi << 16));
+	else
+		*mac = ((mac_lo) | ((u64)mac_hi << 32));
+
+	return 0;
+}
+
 #define CRB_WIN_LOCK_TIMEOUT 100000000
 
 static int crb_win_lock(struct netxen_adapter *adapter)
@@ -1411,7 +1442,8 @@ static int netxen_nic_pci_mem_read_direct(struct netxen_adapter *adapter,
 		(netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) {
 		write_unlock_irqrestore(&adapter->adapter_lock, flags);
 		printk(KERN_ERR "%s out of bound pci memory access. "
-			"offset is 0x%llx\n", netxen_nic_driver_name, off);
+			"offset is 0x%llx\n", netxen_nic_driver_name,
+			(unsigned long long)off);
 		return -1;
 	}
 
@@ -1484,7 +1516,8 @@ netxen_nic_pci_mem_write_direct(struct netxen_adapter *adapter, u64 off,
 		(netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) {
 		write_unlock_irqrestore(&adapter->adapter_lock, flags);
 		printk(KERN_ERR "%s out of bound pci memory access. "
-			"offset is 0x%llx\n", netxen_nic_driver_name, off);
+			"offset is 0x%llx\n", netxen_nic_driver_name,
+			(unsigned long long)off);
 		return -1;
 	}
 
@@ -2016,6 +2049,8 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
 	case NETXEN_BRDTYPE_P3_IMEZ:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
+	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 	case NETXEN_BRDTYPE_P3_10000_BASE_T:
 
@@ -2034,6 +2069,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 	default:
 		printk("%s: Unknown(%x)\n", netxen_nic_driver_name,
 		       boardinfo->board_type);
+		rv = -ENODEV;
 		break;
 	}
 
@@ -2044,6 +2080,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 
 int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
 {
+	new_mtu += MTU_FUDGE_FACTOR;
 	netxen_nic_write_w0(adapter,
 		NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
 		new_mtu);
@@ -2052,7 +2089,7 @@ int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
 
 int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
 {
-	new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE;
+	new_mtu += MTU_FUDGE_FACTOR;
 	if (adapter->physical_port == 0)
 		netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE,
 				new_mtu);
@@ -2074,12 +2111,22 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 	__u32 status;
 	__u32 autoneg;
 	__u32 mode;
+	__u32 port_mode;
 
 	netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode);
 	if (netxen_get_niu_enable_ge(mode)) {	/* Gb 10/100/1000 Mbps mode */
+
+		adapter->hw_read_wx(adapter,
+				NETXEN_PORT_MODE_ADDR, &port_mode, 4);
+		if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
+			adapter->link_speed   = SPEED_1000;
+			adapter->link_duplex  = DUPLEX_FULL;
+			adapter->link_autoneg = AUTONEG_DISABLE;
+			return;
+		}
+
 		if (adapter->phy_read
-		    && adapter->
-		    phy_read(adapter,
+		    && adapter->phy_read(adapter,
 			     NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
 			     &status) == 0) {
 			if (netxen_get_phy_link(status)) {
@@ -2109,8 +2156,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 					break;
 				}
 				if (adapter->phy_read
-				    && adapter->
-				    phy_read(adapter,
+				    && adapter->phy_read(adapter,
 					     NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG,
 					     &autoneg) != 0)
 					adapter->link_autoneg = autoneg;
@@ -2162,10 +2208,10 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
 	if (adapter->portnum == 0) {
 		get_brd_name_by_type(board_info->board_type, brd_name);
 
-		printk("NetXen %s Board S/N %s  Chip id 0x%x\n",
-				brd_name, serial_num, board_info->chip_id);
-		printk("NetXen Firmware version %d.%d.%d\n", fw_major,
-				fw_minor, fw_build);
+		printk(KERN_INFO "NetXen %s Board S/N %s  Chip rev 0x%x\n",
+				brd_name, serial_num, adapter->ahw.revision_id);
+		printk(KERN_INFO "NetXen Firmware version %d.%d.%d\n",
+				fw_major, fw_minor, fw_build);
 	}
 
 	if (NETXEN_VERSION_CODE(fw_major, fw_minor, fw_build) <
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index b8e0030f03d..aae737dc77a 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -419,12 +419,9 @@ typedef enum {
 #define netxen_get_niu_enable_ge(config_word)	\
 		_netxen_crb_get_bit(config_word, 1)
 
-/* Promiscous mode options (GbE mode only) */
-typedef enum {
-	NETXEN_NIU_PROMISC_MODE = 0,
-	NETXEN_NIU_NON_PROMISC_MODE,
-	NETXEN_NIU_ALLMULTI_MODE
-} netxen_niu_prom_mode_t;
+#define NETXEN_NIU_NON_PROMISC_MODE	0
+#define NETXEN_NIU_PROMISC_MODE		1
+#define NETXEN_NIU_ALLMULTI_MODE	2
 
 /*
  * NIU GB Drop CRC Register
@@ -471,9 +468,9 @@ typedef enum {
 
 /* Set promiscuous mode for a GbE interface */
 int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
-				    netxen_niu_prom_mode_t mode);
+				    u32 mode);
 int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
-				       netxen_niu_prom_mode_t mode);
+				       u32 mode);
 
 /* set the MAC address for a given MAC */
 int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 01ab31b34a8..5bba675d050 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -364,6 +364,11 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 	default:
 		break;
 	}
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		adapter->set_mtu = nx_fw_cmd_set_mtu;
+		adapter->set_promisc = netxen_p3_nic_set_promisc;
+	}
 }
 
 /*
@@ -1074,10 +1079,12 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 
 void netxen_free_adapter_offload(struct netxen_adapter *adapter)
 {
-	int i;
+	int i = 100;
+
+	if (!adapter->dummy_dma.addr)
+		return;
 
-	if (adapter->dummy_dma.addr) {
-		i = 100;
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
 		do {
 			if (dma_watchdog_shutdown_request(adapter) == 1)
 				break;
@@ -1085,17 +1092,17 @@ void netxen_free_adapter_offload(struct netxen_adapter *adapter)
 			if (dma_watchdog_shutdown_poll_result(adapter) == 1)
 				break;
 		} while (--i);
+	}
 
-		if (i) {
-			pci_free_consistent(adapter->pdev,
-				    NETXEN_HOST_DUMMY_DMA_SIZE,
-				    adapter->dummy_dma.addr,
-				    adapter->dummy_dma.phys_addr);
-			adapter->dummy_dma.addr = NULL;
-		} else {
-			printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
-					adapter->netdev->name);
-		}
+	if (i) {
+		pci_free_consistent(adapter->pdev,
+			    NETXEN_HOST_DUMMY_DMA_SIZE,
+			    adapter->dummy_dma.addr,
+			    adapter->dummy_dma.phys_addr);
+		adapter->dummy_dma.addr = NULL;
+	} else {
+		printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
+				adapter->netdev->name);
 	}
 }
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 91d209a8f6c..008fd6618a5 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -149,80 +149,18 @@ static uint32_t msi_tgt_status[8] = {
 
 static struct netxen_legacy_intr_set legacy_intr[] = NX_LEGACY_INTR_CONFIG;
 
-static void netxen_nic_disable_int(struct netxen_adapter *adapter)
+static inline void netxen_nic_disable_int(struct netxen_adapter *adapter)
 {
-	u32 mask = 0x7ff;
-	int retries = 32;
-	int pci_fn = adapter->ahw.pci_func;
-
-	if (adapter->msi_mode != MSI_MODE_MULTIFUNC)
-		adapter->pci_write_normalize(adapter,
-				adapter->crb_intr_mask, 0);
-
-	if (adapter->intr_scheme != -1 &&
-	    adapter->intr_scheme != INTR_SCHEME_PERPORT)
-		adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
-
-	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
-		do {
-			adapter->pci_write_immediate(adapter,
-					ISR_INT_TARGET_STATUS, 0xffffffff);
-			mask = adapter->pci_read_immediate(adapter,
-					ISR_INT_VECTOR);
-			if (!(mask & 0x80))
-				break;
-			udelay(10);
-		} while (--retries);
-
-		if (!retries) {
-			printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
-					netxen_nic_driver_name);
-		}
-	} else {
-		if (adapter->msi_mode == MSI_MODE_MULTIFUNC) {
-			adapter->pci_write_immediate(adapter,
-					msi_tgt_status[pci_fn], 0xffffffff);
-		}
-	}
+	adapter->pci_write_normalize(adapter, adapter->crb_intr_mask, 0);
 }
 
-static void netxen_nic_enable_int(struct netxen_adapter *adapter)
+static inline void netxen_nic_enable_int(struct netxen_adapter *adapter)
 {
-	u32 mask;
-
-	DPRINTK(1, INFO, "Entered ISR Enable \n");
-
-	if (adapter->intr_scheme != -1 &&
-		adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-		switch (adapter->ahw.board_type) {
-		case NETXEN_NIC_GBE:
-			mask  =  0x77b;
-			break;
-		case NETXEN_NIC_XGBE:
-			mask  =  0x77f;
-			break;
-		default:
-			mask  =  0x7ff;
-			break;
-		}
-
-		adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
-	}
-
 	adapter->pci_write_normalize(adapter, adapter->crb_intr_mask, 0x1);
 
-	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
-		mask = 0xbff;
-		if (adapter->intr_scheme != -1 &&
-			adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-			adapter->pci_write_normalize(adapter,
-					CRB_INT_VECTOR, 0);
-		}
+	if (!NETXEN_IS_MSI_FAMILY(adapter))
 		adapter->pci_write_immediate(adapter,
-				ISR_INT_TARGET_MASK, mask);
-	}
-
-	DPRINTK(1, INFO, "Done with enable Int\n");
+				adapter->legacy_intr.tgt_mask_reg, 0xfbff);
 }
 
 static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
@@ -284,6 +222,8 @@ static void netxen_check_options(struct netxen_adapter *adapter)
 	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
 	case NETXEN_BRDTYPE_P3_IMEZ:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
+	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 	case NETXEN_BRDTYPE_P3_10000_BASE_T:
 		adapter->msix_supported = !!use_msi_x;
@@ -301,6 +241,10 @@ static void netxen_check_options(struct netxen_adapter *adapter)
 	case NETXEN_BRDTYPE_P3_REF_QG:
 	case NETXEN_BRDTYPE_P3_4_GB:
 	case NETXEN_BRDTYPE_P3_4_GB_MM:
+		adapter->msix_supported = 0;
+		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+		break;
+
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 	case NETXEN_BRDTYPE_P2_SB31_2G:
 		adapter->msix_supported = 0;
@@ -415,16 +359,6 @@ static void netxen_pcie_strap_init(struct netxen_adapter *adapter)
 	int i, pos;
 	struct pci_dev *pdev;
 
-	pdev = pci_get_device(0x1166, 0x0140, NULL);
-	if (pdev) {
-		pci_dev_put(pdev);
-		adapter->hw_read_wx(adapter,
-			NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
-		chicken |= 0x4000;
-		adapter->hw_write_wx(adapter,
-			NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
-	}
-
 	pdev = adapter->pdev;
 
 	adapter->hw_read_wx(adapter,
@@ -499,6 +433,44 @@ static void netxen_init_msix_entries(struct netxen_adapter *adapter)
 		adapter->msix_entries[i].entry = i;
 }
 
+static int
+netxen_read_mac_addr(struct netxen_adapter *adapter)
+{
+	int i;
+	unsigned char *p;
+	__le64 mac_addr;
+	DECLARE_MAC_BUF(mac);
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+
+	if (netxen_is_flash_supported(adapter) != 0)
+		return -EIO;
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		if (netxen_p3_get_mac_addr(adapter, &mac_addr) != 0)
+			return -EIO;
+	} else {
+		if (netxen_get_flash_mac_addr(adapter, &mac_addr) != 0)
+			return -EIO;
+	}
+
+	p = (unsigned char *)&mac_addr;
+	for (i = 0; i < 6; i++)
+		netdev->dev_addr[i] = *(p + 5 - i);
+
+	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+
+	/* set station address */
+
+	if (!is_valid_ether_addr(netdev->perm_addr)) {
+		dev_warn(&pdev->dev, "Bad MAC address %s.\n",
+				print_mac(mac, netdev->dev_addr));
+	} else
+		adapter->macaddr_set(adapter, netdev->dev_addr);
+
+	return 0;
+}
+
 /*
  * netxen_nic_probe()
  *
@@ -527,10 +499,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	unsigned long mem_base, mem_len, db_base, db_len, pci_len0 = 0;
 	int i = 0, err;
 	int first_driver, first_boot;
-	__le64 mac_addr[FLASH_NUM_PORTS + 1];
 	u32 val;
 	int pci_func_id = PCI_FUNC(pdev->devfn);
-	DECLARE_MAC_BUF(mac);
 	struct netxen_legacy_intr_set *legacy_intrp;
 	uint8_t revision_id;
 
@@ -543,6 +513,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -ENODEV;
 	}
 
+	if (pdev->revision >= NX_P3_A0 && pdev->revision < NX_P3_B1) {
+		printk(KERN_WARNING "NetXen chip revisions between 0x%x-0x%x"
+				"will not be enabled.\n",
+				NX_P3_A0, NX_P3_B1);
+		return -ENODEV;
+	}
+
 	if ((err = pci_enable_device(pdev)))
 		return err;
 
@@ -700,13 +677,10 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->status   &= ~NETXEN_NETDEV_STATUS;
 	adapter->rx_csum = 1;
 	adapter->mc_enabled = 0;
-	if (NX_IS_REVISION_P3(revision_id)) {
+	if (NX_IS_REVISION_P3(revision_id))
 		adapter->max_mc_count = 38;
-		adapter->max_rds_rings = 2;
-	} else {
+	else
 		adapter->max_mc_count = 16;
-		adapter->max_rds_rings = 3;
-	}
 
 	netdev->open		   = netxen_nic_open;
 	netdev->stop		   = netxen_nic_close;
@@ -779,10 +753,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		if (adapter->portnum == 0)
 			first_driver = 1;
 	}
-	adapter->crb_addr_cmd_producer = crb_cmd_producer[adapter->portnum];
-	adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum];
-	netxen_nic_update_cmd_producer(adapter, 0);
-	netxen_nic_update_cmd_consumer(adapter, 0);
 
 	if (first_driver) {
 		first_boot = adapter->pci_read_normalize(adapter,
@@ -903,34 +873,14 @@ request_msi:
 		goto err_out_disable_msi;
 
 	init_timer(&adapter->watchdog_timer);
-	adapter->ahw.linkup = 0;
 	adapter->watchdog_timer.function = &netxen_watchdog;
 	adapter->watchdog_timer.data = (unsigned long)adapter;
 	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
 	INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
 
-	if (netxen_is_flash_supported(adapter) == 0 &&
-			netxen_get_flash_mac_addr(adapter, mac_addr) == 0) {
-		unsigned char *p;
-
-		p = (unsigned char *)&mac_addr[adapter->portnum];
-		netdev->dev_addr[0] = *(p + 5);
-		netdev->dev_addr[1] = *(p + 4);
-		netdev->dev_addr[2] = *(p + 3);
-		netdev->dev_addr[3] = *(p + 2);
-		netdev->dev_addr[4] = *(p + 1);
-		netdev->dev_addr[5] = *(p + 0);
-
-		memcpy(netdev->perm_addr, netdev->dev_addr,
-			netdev->addr_len);
-		if (!is_valid_ether_addr(netdev->perm_addr)) {
-			printk(KERN_ERR "%s: Bad MAC address %s.\n",
-					netxen_nic_driver_name,
-					print_mac(mac, netdev->dev_addr));
-		} else {
-			adapter->macaddr_set(adapter, netdev->dev_addr);
-		}
-	}
+	err = netxen_read_mac_addr(adapter);
+	if (err)
+		dev_warn(&pdev->dev, "failed to read mac addr\n");
 
 	netif_carrier_off(netdev);
 	netif_stop_queue(netdev);
@@ -1005,6 +955,7 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 
 	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
 		netxen_free_hw_resources(adapter);
+		netxen_release_rx_buffers(adapter);
 		netxen_free_sw_resources(adapter);
 	}
 
@@ -1053,6 +1004,11 @@ static int netxen_nic_open(struct net_device *netdev)
 			return -EIO;
 		}
 
+		if (adapter->fw_major < 4)
+			adapter->max_rds_rings = 3;
+		else
+			adapter->max_rds_rings = 2;
+
 		err = netxen_alloc_sw_resources(adapter);
 		if (err) {
 			printk(KERN_ERR "%s: Error in setting sw resources\n",
@@ -1069,15 +1025,24 @@ static int netxen_nic_open(struct net_device *netdev)
 			goto err_out_free_sw;
 		}
 
+		if ((adapter->msi_mode != MSI_MODE_MULTIFUNC) ||
+			(adapter->intr_scheme != INTR_SCHEME_PERPORT)) {
+			printk(KERN_ERR "%s: Firmware interrupt scheme is "
+					"incompatible with driver\n",
+					netdev->name);
+			adapter->driver_mismatch = 1;
+			goto err_out_free_hw;
+		}
+
 		if (adapter->fw_major < 4) {
 			adapter->crb_addr_cmd_producer =
 				crb_cmd_producer[adapter->portnum];
 			adapter->crb_addr_cmd_consumer =
 				crb_cmd_consumer[adapter->portnum];
-		}
 
-		netxen_nic_update_cmd_producer(adapter, 0);
-		netxen_nic_update_cmd_consumer(adapter, 0);
+			netxen_nic_update_cmd_producer(adapter, 0);
+			netxen_nic_update_cmd_consumer(adapter, 0);
+		}
 
 		for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
 			for (ring = 0; ring < adapter->max_rds_rings; ring++)
@@ -1094,7 +1059,7 @@ static int netxen_nic_open(struct net_device *netdev)
 				  flags, netdev->name, adapter);
 		if (err) {
 			printk(KERN_ERR "request_irq failed with: %d\n", err);
-			goto err_out_free_hw;
+			goto err_out_free_rxbuf;
 		}
 
 		adapter->is_up = NETXEN_ADAPTER_UP_MAGIC;
@@ -1113,11 +1078,10 @@ static int netxen_nic_open(struct net_device *netdev)
 	netxen_nic_set_link_parameters(adapter);
 
 	netdev->set_multicast_list(netdev);
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		nx_fw_cmd_set_mtu(adapter, netdev->mtu);
-	else
+	if (adapter->set_mtu)
 		adapter->set_mtu(adapter, netdev->mtu);
 
+	adapter->ahw.linkup = 0;
 	mod_timer(&adapter->watchdog_timer, jiffies);
 
 	napi_enable(&adapter->napi);
@@ -1129,6 +1093,8 @@ static int netxen_nic_open(struct net_device *netdev)
 
 err_out_free_irq:
 	free_irq(adapter->irq, adapter);
+err_out_free_rxbuf:
+	netxen_release_rx_buffers(adapter);
 err_out_free_hw:
 	netxen_free_hw_resources(adapter);
 err_out_free_sw:
@@ -1154,10 +1120,8 @@ static int netxen_nic_close(struct net_device *netdev)
 
 	netxen_release_tx_buffers(adapter);
 
-	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
-		FLUSH_SCHEDULED_WORK();
-		del_timer_sync(&adapter->watchdog_timer);
-	}
+	FLUSH_SCHEDULED_WORK();
+	del_timer_sync(&adapter->watchdog_timer);
 
 	return 0;
 }
@@ -1410,20 +1374,17 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
 
 	port = adapter->physical_port;
 
-	if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
-		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
-		linkup = (val >> port) & 1;
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE_P3);
+		val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
+		linkup = (val == XG_LINK_UP_P3);
 	} else {
-		if (adapter->fw_major < 4) {
-			val = adapter->pci_read_normalize(adapter,
-					CRB_XG_STATE);
+		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
+		if (adapter->ahw.board_type == NETXEN_NIC_GBE)
+			linkup = (val >> port) & 1;
+		else {
 			val = (val >> port*8) & 0xff;
 			linkup = (val == XG_LINK_UP);
-		} else {
-			val = adapter->pci_read_normalize(adapter,
-				CRB_XG_STATE_P3);
-			val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
-			linkup = (val == XG_LINK_UP_P3);
 		}
 	}
 
@@ -1463,7 +1424,8 @@ void netxen_watchdog_task(struct work_struct *work)
 
 	netxen_nic_handle_phy_intr(adapter);
 
-	mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+	if (netif_running(adapter->netdev))
+		mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
 }
 
 static void netxen_tx_timeout(struct net_device *netdev)
@@ -1523,30 +1485,49 @@ struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
 	return stats;
 }
 
-static inline void
-netxen_handle_int(struct netxen_adapter *adapter)
-{
-	netxen_nic_disable_int(adapter);
-	napi_schedule(&adapter->napi);
-}
-
 static irqreturn_t netxen_intr(int irq, void *data)
 {
 	struct netxen_adapter *adapter = data;
-	u32 our_int = 0;
+	u32 status = 0;
 
-	our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
-	/* not our interrupt */
-	if ((our_int & (0x80 << adapter->portnum)) == 0)
+	status = adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+
+	if (!(status & adapter->legacy_intr.int_vec_bit))
 		return IRQ_NONE;
 
-	if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
+	if (adapter->ahw.revision_id >= NX_P3_B1) {
+		/* check interrupt state machine, to be sure */
+		status = adapter->pci_read_immediate(adapter,
+				ISR_INT_STATE_REG);
+		if (!ISR_LEGACY_INT_TRIGGERED(status))
+			return IRQ_NONE;
+
+	} else {
+		unsigned long our_int = 0;
+
+		our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
+
+		/* not our interrupt */
+		if (!test_and_clear_bit((7 + adapter->portnum), &our_int))
+			return IRQ_NONE;
+
 		/* claim interrupt */
-		adapter->pci_write_normalize(adapter, CRB_INT_VECTOR,
-				our_int & ~((u32)(0x80 << adapter->portnum)));
+		adapter->pci_write_normalize(adapter,
+				CRB_INT_VECTOR, (our_int & 0xffffffff));
 	}
 
-	netxen_handle_int(adapter);
+	/* clear interrupt */
+	if (adapter->fw_major < 4)
+		netxen_nic_disable_int(adapter);
+
+	adapter->pci_write_immediate(adapter,
+			adapter->legacy_intr.tgt_status_reg,
+			0xffffffff);
+	/* read twice to ensure write is flushed */
+	adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+	adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+
+	napi_schedule(&adapter->napi);
 
 	return IRQ_HANDLED;
 }
@@ -1555,7 +1536,11 @@ static irqreturn_t netxen_msi_intr(int irq, void *data)
 {
 	struct netxen_adapter *adapter = data;
 
-	netxen_handle_int(adapter);
+	/* clear interrupt */
+	adapter->pci_write_immediate(adapter,
+			msi_tgt_status[adapter->ahw.pci_func], 0xffffffff);
+
+	napi_schedule(&adapter->napi);
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index 4cb8f4a1cf4..27f07f6a45b 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -610,6 +610,9 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
 	int i;
 	DECLARE_MAC_BUF(mac);
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	for (i = 0; i < 10; i++) {
 		temp[0] = temp[1] = 0;
 		memcpy(temp + 2, addr, 2);
@@ -727,6 +730,9 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
 	__u32 mac_cfg0;
 	u32 port = adapter->physical_port;
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	if (port > NETXEN_NIU_MAX_GBE_PORTS)
 		return -EINVAL;
 	mac_cfg0 = 0;
@@ -743,6 +749,9 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
 	__u32 mac_cfg;
 	u32 port = adapter->physical_port;
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
 
@@ -755,7 +764,7 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
 
 /* Set promiscuous mode for a GbE interface */
 int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
-				    netxen_niu_prom_mode_t mode)
+		u32 mode)
 {
 	__u32 reg;
 	u32 port = adapter->physical_port;
@@ -819,6 +828,9 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
 	u8 temp[4];
 	u32 val;
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	if ((phy < 0) || (phy > NETXEN_NIU_MAX_XG_PORTS))
 		return -EIO;
 
@@ -894,7 +906,7 @@ int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter,
 #endif  /*  0  */
 
 int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
-				       netxen_niu_prom_mode_t mode)
+		u32 mode)
 {
 	__u32 reg;
 	u32 port = adapter->physical_port;
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index 3bfa51b62a4..b293adcc95a 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -95,8 +95,8 @@
 #define CRB_HOST_STS_PROD           NETXEN_NIC_REG(0xdc)
 #define CRB_HOST_STS_CONS           NETXEN_NIC_REG(0xe0)
 #define CRB_PEG_CMD_PROD            NETXEN_NIC_REG(0xe4)
-#define CRB_PEG_CMD_CONS            NETXEN_NIC_REG(0xe8)
-#define CRB_HOST_BUFFER_PROD        NETXEN_NIC_REG(0xec)
+#define CRB_PF_LINK_SPEED_1         NETXEN_NIC_REG(0xe8)
+#define CRB_PF_LINK_SPEED_2         NETXEN_NIC_REG(0xec)
 #define CRB_HOST_BUFFER_CONS        NETXEN_NIC_REG(0xf0)
 #define CRB_JUMBO_BUFFER_PROD       NETXEN_NIC_REG(0xf4)
 #define CRB_JUMBO_BUFFER_CONS       NETXEN_NIC_REG(0xf8)
@@ -125,6 +125,8 @@
 #define CRB_SW_INT_MASK_2	   NETXEN_NIC_REG(0x1e4)
 #define CRB_SW_INT_MASK_3	   NETXEN_NIC_REG(0x1e8)
 
+#define CRB_MAC_BLOCK_START        NETXEN_CAM_RAM(0x1c0)
+
 /*
  * capabilities register, can be used to selectively enable/disable features
  * for backward compability
diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c
index a20005c09e0..8e0ca9f4e40 100644
--- a/drivers/net/ni5010.c
+++ b/drivers/net/ni5010.c
@@ -648,7 +648,6 @@ static void ni5010_set_multicast_list(struct net_device *dev)
 	PRINTK2((KERN_DEBUG "%s: entering set_multicast_list\n", dev->name));
 
 	if (dev->flags&IFF_PROMISC || dev->flags&IFF_ALLMULTI || dev->mc_list) {
-		dev->flags |= IFF_PROMISC;
 		outb(RMD_PROMISC, EDLC_RMODE); /* Enable promiscuous mode */
 		PRINTK((KERN_DEBUG "%s: Entering promiscuous mode\n", dev->name));
 	} else {
diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c
index a316dcc8a06..b9a882d362d 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ni52.c
@@ -621,7 +621,7 @@ static int init586(struct net_device *dev)
 		if (num_addrs > len) {
 			printk(KERN_ERR "%s: switching to promisc. mode\n",
 				dev->name);
-			dev->flags |= IFF_PROMISC;
+			writeb(0x01, &cfg_cmd->promisc);
 		}
 	}
 	if (dev->flags & IFF_PROMISC)
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 8ee7d7bb951..e3be81eba8a 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -5984,6 +5984,56 @@ static void niu_netif_start(struct niu *np)
 	niu_enable_interrupts(np, 1);
 }
 
+static void niu_reset_buffers(struct niu *np)
+{
+	int i, j, k, err;
+
+	if (np->rx_rings) {
+		for (i = 0; i < np->num_rx_rings; i++) {
+			struct rx_ring_info *rp = &np->rx_rings[i];
+
+			for (j = 0, k = 0; j < MAX_RBR_RING_SIZE; j++) {
+				struct page *page;
+
+				page = rp->rxhash[j];
+				while (page) {
+					struct page *next =
+						(struct page *) page->mapping;
+					u64 base = page->index;
+					base = base >> RBR_DESCR_ADDR_SHIFT;
+					rp->rbr[k++] = cpu_to_le32(base);
+					page = next;
+				}
+			}
+			for (; k < MAX_RBR_RING_SIZE; k++) {
+				err = niu_rbr_add_page(np, rp, GFP_ATOMIC, k);
+				if (unlikely(err))
+					break;
+			}
+
+			rp->rbr_index = rp->rbr_table_size - 1;
+			rp->rcr_index = 0;
+			rp->rbr_pending = 0;
+			rp->rbr_refill_pending = 0;
+		}
+	}
+	if (np->tx_rings) {
+		for (i = 0; i < np->num_tx_rings; i++) {
+			struct tx_ring_info *rp = &np->tx_rings[i];
+
+			for (j = 0; j < MAX_TX_RING_SIZE; j++) {
+				if (rp->tx_buffs[j].skb)
+					(void) release_tx_packet(np, rp, j);
+			}
+
+			rp->pending = MAX_TX_RING_SIZE;
+			rp->prod = 0;
+			rp->cons = 0;
+			rp->wrap_bit = 0;
+		}
+	}
+}
+
 static void niu_reset_task(struct work_struct *work)
 {
 	struct niu *np = container_of(work, struct niu, reset_task);
@@ -6006,6 +6056,12 @@ static void niu_reset_task(struct work_struct *work)
 
 	niu_stop_hw(np);
 
+	spin_unlock_irqrestore(&np->lock, flags);
+
+	niu_reset_buffers(np);
+
+	spin_lock_irqsave(&np->lock, flags);
+
 	err = niu_init_hw(np);
 	if (!err) {
 		np->timer.expires = jiffies + HZ;
@@ -6417,7 +6473,7 @@ static int niu_ethflow_to_class(int flow_type, u64 *class)
 		*class = CLASS_CODE_SCTP_IPV6;
 		break;
 	default:
-		return -1;
+		return 0;
 	}
 
 	return 1;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 3f682d49a4e..52bf11b73c6 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -784,6 +784,7 @@ static struct pcmcia_device_id axnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXD", 0x5261440f, 0x436768c5),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEtherII PCC-TXD", 0x5261440f, 0x730df72e),
 	PCMCIA_DEVICE_PROD_ID12("Dynalink", "L100C16", 0x55632fd5, 0x66bc2a90),
+	PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8),
 	PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04),
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 2d4c4ad89b8..ebc1ae6bcbe 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1626,6 +1626,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
 	PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
 	PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
@@ -1737,7 +1738,6 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
 	PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
 	PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
-	PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6),
 	PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
 	PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
 	/* too generic! */
diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp_mppe.c
index b35d7944950..88f03c9e940 100644
--- a/drivers/net/ppp_mppe.c
+++ b/drivers/net/ppp_mppe.c
@@ -46,7 +46,6 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/slab.h>
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index f9298827a76..ff175e8f36b 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -61,7 +61,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/string.h>
 #include <linux/list.h>
 #include <asm/uaccess.h>
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 6b2dee0cf3a..a834b52a6a2 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -1024,7 +1024,7 @@ static int gelic_wl_set_encode(struct net_device *netdev,
 	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
 	struct iw_point *enc = &data->encoding;
 	__u16 flags;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int key_index, index_specified;
 	int ret = 0;
 
@@ -1097,7 +1097,7 @@ static int gelic_wl_get_encode(struct net_device *netdev,
 {
 	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
 	struct iw_point *enc = &data->encoding;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	unsigned int key_index, index_specified;
 	int ret = 0;
 
@@ -1215,7 +1215,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev,
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
 	__u16 alg;
 	__u16 flags;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int key_index;
 	int ret = 0;
 
@@ -1303,7 +1303,7 @@ static int gelic_wl_get_encodeext(struct net_device *netdev,
 	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
 	struct iw_point *enc = &data->encoding;
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int key_index;
 	int ret = 0;
 	int max_key_len;
@@ -1426,7 +1426,7 @@ static int gelic_wl_priv_set_psk(struct net_device *net_dev,
 {
 	struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
 	unsigned int len;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int ret = 0;
 
 	pr_debug("%s:<- len=%d\n", __func__, data->data.length);
@@ -1467,7 +1467,7 @@ static int gelic_wl_priv_get_psk(struct net_device *net_dev,
 {
 	struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
 	char *p;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	unsigned int i;
 
 	pr_debug("%s:<-\n", __func__);
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index e82b37bbd6c..3cdd07c45b6 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -38,7 +38,7 @@
 
 #define DRV_NAME  	"qla3xxx"
 #define DRV_STRING 	"QLogic ISP3XXX Network Driver"
-#define DRV_VERSION	"v2.03.00-k4"
+#define DRV_VERSION	"v2.03.00-k5"
 #define PFX		DRV_NAME " "
 
 static const char ql3xxx_driver_name[] = DRV_NAME;
@@ -3495,8 +3495,6 @@ static void ql_set_mac_info(struct ql3_adapter *qdev)
 	case ISP_CONTROL_FN0_NET:
 		qdev->mac_index = 0;
 		qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number;
-		qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number;
-		qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number;
 		qdev->mb_bit_mask = FN0_MA_BITS_MASK;
 		qdev->PHYAddr = PORT0_PHY_ADDRESS;
 		if (port_status & PORT_STATUS_SM0)
@@ -3508,8 +3506,6 @@ static void ql_set_mac_info(struct ql3_adapter *qdev)
 	case ISP_CONTROL_FN1_NET:
 		qdev->mac_index = 1;
 		qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number;
-		qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number;
-		qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number;
 		qdev->mb_bit_mask = FN1_MA_BITS_MASK;
 		qdev->PHYAddr = PORT1_PHY_ADDRESS;
 		if (port_status & PORT_STATUS_SM1)
@@ -3730,14 +3726,6 @@ static int ql3xxx_open(struct net_device *ndev)
 	return (ql_adapter_up(qdev));
 }
 
-static void ql3xxx_set_multicast_list(struct net_device *ndev)
-{
-	/*
-	 * We are manually parsing the list in the net_device structure.
-	 */
-	return;
-}
-
 static int ql3xxx_set_mac_address(struct net_device *ndev, void *p)
 {
 	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
@@ -4007,7 +3995,11 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
 	ndev->open = ql3xxx_open;
 	ndev->hard_start_xmit = ql3xxx_send;
 	ndev->stop = ql3xxx_close;
-	ndev->set_multicast_list = ql3xxx_set_multicast_list;
+	/* ndev->set_multicast_list
+	 * This device is one side of a two-function adapter
+	 * (NIC and iSCSI).  Promiscuous mode setting/clearing is
+	 * not allowed from the NIC side.
+	 */
 	SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops);
 	ndev->set_mac_address = ql3xxx_set_mac_address;
 	ndev->tx_timeout = ql3xxx_tx_timeout;
@@ -4040,9 +4032,6 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
 
 	ndev->tx_queue_len = NUM_REQ_Q_ENTRIES;
 
-	/* Turn off support for multicasting */
-	ndev->flags &= ~IFF_MULTICAST;
-
 	/* Record PCI bus information. */
 	ql_get_board_info(qdev);
 
diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h
index 58a086fddec..7113e71b15a 100644
--- a/drivers/net/qla3xxx.h
+++ b/drivers/net/qla3xxx.h
@@ -14,24 +14,14 @@
 
 #define OPCODE_OB_MAC_IOCB_FN0          0x01
 #define OPCODE_OB_MAC_IOCB_FN2          0x21
-#define OPCODE_OB_TCP_IOCB_FN0          0x03
-#define OPCODE_OB_TCP_IOCB_FN2          0x23
-#define OPCODE_UPDATE_NCB_IOCB_FN0      0x00
-#define OPCODE_UPDATE_NCB_IOCB_FN2      0x20
 
-#define OPCODE_UPDATE_NCB_IOCB      0xF0
 #define OPCODE_IB_MAC_IOCB          0xF9
 #define OPCODE_IB_3032_MAC_IOCB     0x09
 #define OPCODE_IB_IP_IOCB           0xFA
 #define OPCODE_IB_3032_IP_IOCB      0x0A
-#define OPCODE_IB_TCP_IOCB          0xFB
-#define OPCODE_DUMP_PROTO_IOCB      0xFE
-#define OPCODE_BUFFER_ALERT_IOCB    0xFB
 
 #define OPCODE_FUNC_ID_MASK                 0x30
 #define OUTBOUND_MAC_IOCB                   0x01	/* plus function bits */
-#define OUTBOUND_TCP_IOCB                   0x03	/* plus function bits */
-#define UPDATE_NCB_IOCB                     0x00	/* plus function bits */
 
 #define FN0_MA_BITS_MASK    0x00
 #define FN1_MA_BITS_MASK    0x80
@@ -159,75 +149,6 @@ struct ob_ip_iocb_rsp {
 	__le32 reserved2;
 };
 
-struct ob_tcp_iocb_req {
-	u8 opcode;
-
-	u8 flags0;
-#define OB_TCP_IOCB_REQ_P       0x80
-#define OB_TCP_IOCB_REQ_CI      0x20
-#define OB_TCP_IOCB_REQ_H       0x10
-#define OB_TCP_IOCB_REQ_LN      0x08
-#define OB_TCP_IOCB_REQ_K       0x04
-#define OB_TCP_IOCB_REQ_D       0x02
-#define OB_TCP_IOCB_REQ_I       0x01
-
-	u8 flags1;
-#define OB_TCP_IOCB_REQ_OSM     0x40
-#define OB_TCP_IOCB_REQ_URG     0x20
-#define OB_TCP_IOCB_REQ_ACK     0x10
-#define OB_TCP_IOCB_REQ_PSH     0x08
-#define OB_TCP_IOCB_REQ_RST     0x04
-#define OB_TCP_IOCB_REQ_SYN     0x02
-#define OB_TCP_IOCB_REQ_FIN     0x01
-
-	u8 options_len;
-#define OB_TCP_IOCB_REQ_OMASK   0xF0
-#define OB_TCP_IOCB_REQ_SHIFT   4
-
-	__le32 transaction_id;
-	__le32 data_len;
-	__le32 hncb_ptr_low;
-	__le32 hncb_ptr_high;
-	__le32 buf_addr0_low;
-	__le32 buf_addr0_high;
-	__le32 buf_0_len;
-	__le32 buf_addr1_low;
-	__le32 buf_addr1_high;
-	__le32 buf_1_len;
-	__le32 buf_addr2_low;
-	__le32 buf_addr2_high;
-	__le32 buf_2_len;
-	__le32 time_stamp;
-	__le32 reserved1;
-};
-
-struct ob_tcp_iocb_rsp {
-	u8 opcode;
-
-	u8 flags0;
-#define OB_TCP_IOCB_RSP_C       0x20
-#define OB_TCP_IOCB_RSP_H       0x10
-#define OB_TCP_IOCB_RSP_LN      0x08
-#define OB_TCP_IOCB_RSP_K       0x04
-#define OB_TCP_IOCB_RSP_D       0x02
-#define OB_TCP_IOCB_RSP_I       0x01
-
-	u8 flags1;
-#define OB_TCP_IOCB_RSP_E       0x10
-#define OB_TCP_IOCB_RSP_W       0x08
-#define OB_TCP_IOCB_RSP_P       0x04
-#define OB_TCP_IOCB_RSP_T       0x02
-#define OB_TCP_IOCB_RSP_F       0x01
-
-	u8 state;
-#define OB_TCP_IOCB_RSP_SMASK   0xF0
-#define OB_TCP_IOCB_RSP_SHIFT   4
-
-	__le32 transaction_id;
-	__le32 local_ncb_ptr;
-	__le32 reserved0;
-};
-
 struct ib_ip_iocb_rsp {
 	u8 opcode;
 #define IB_IP_IOCB_RSP_3032_V   0x80
@@ -256,25 +177,6 @@ struct ib_ip_iocb_rsp {
 	__le32 ial_high;
 };
 
-struct ib_tcp_iocb_rsp {
-	u8 opcode;
-	u8 flags;
-#define IB_TCP_IOCB_RSP_P       0x80
-#define IB_TCP_IOCB_RSP_T       0x40
-#define IB_TCP_IOCB_RSP_D       0x20
-#define IB_TCP_IOCB_RSP_N       0x10
-#define IB_TCP_IOCB_RSP_IP      0x03
-#define IB_TCP_FLAG_MASK        0xf0
-#define IB_TCP_FLAG_IOCB_SYN    0x00
-
-#define TCP_IB_RSP_FLAGS(x) (x->flags & ~IB_TCP_FLAG_MASK)
-
-	__le16 length;
-	__le32 hncb_ref_num;
-	__le32 ial_low;
-	__le32 ial_high;
-};
-
 struct net_rsp_iocb {
 	u8 opcode;
 	u8 flags;
@@ -1266,20 +1168,13 @@ struct ql3_adapter {
 	u32 small_buf_release_cnt;
 	u32 small_buf_total_size;
 
-	/* ISR related, saves status for DPC. */
-	u32 control_status;
-
 	struct eeprom_data nvram_data;
-	struct timer_list ioctl_timer;
 	u32 port_link_state;
-	u32 last_rsp_offset;
 
 	/* 4022 specific */
 	u32 mac_index;		/* Driver's MAC number can be 0 or 1 for first and second networking functions respectively */
 	u32 PHYAddr;		/* Address of PHY 0x1e00 Port 0 and 0x1f00 Port 1 */
 	u32 mac_ob_opcode;	/* Opcode to use on mac transmission */
-	u32 tcp_ob_opcode;	/* Opcode to use on tcp transmission */
-	u32 update_ob_opcode;	/* Opcode to use for updating NCB */
 	u32 mb_bit_mask;	/* MA Bits mask to use on transmission */
 	u32 numPorts;
 	struct workqueue_struct *workqueue;
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 6531ff565c5..5d86281d936 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -24,7 +24,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/moduleparam.h>
 #include <linux/string.h>
 #include <linux/timer.h>
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index a3e3895e503..0f6f9747d25 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2792,7 +2792,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 					pkt_size, PCI_DMA_FROMDEVICE);
 				rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
 			} else {
-				pci_unmap_single(pdev, addr, pkt_size,
+				pci_unmap_single(pdev, addr, tp->rx_buf_sz,
 						 PCI_DMA_FROMDEVICE);
 				tp->Rx_skbuff[entry] = NULL;
 			}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 86d77d05190..a2b073097e5 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3143,7 +3143,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data)
 		pkt_cnt++;
 
 		/* Updating the statistics block */
-		nic->stats.tx_bytes += skb->len;
+		nic->dev->stats.tx_bytes += skb->len;
 		nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
 		dev_kfree_skb_irq(skb);
 
@@ -4896,25 +4896,42 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev)
 	/* Configure Stats for immediate updt */
 	s2io_updt_stats(sp);
 
+	/* Using sp->stats as a staging area, because reset (due to mtu
+	   change, for example) will clear some hardware counters */
+	dev->stats.tx_packets +=
+		le32_to_cpu(mac_control->stats_info->tmac_frms) - 
+		sp->stats.tx_packets;
 	sp->stats.tx_packets =
 		le32_to_cpu(mac_control->stats_info->tmac_frms);
+	dev->stats.tx_errors +=
+		le32_to_cpu(mac_control->stats_info->tmac_any_err_frms) -
+		sp->stats.tx_errors;
 	sp->stats.tx_errors =
 		le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
+	dev->stats.rx_errors +=
+		le64_to_cpu(mac_control->stats_info->rmac_drop_frms) -
+		sp->stats.rx_errors;
 	sp->stats.rx_errors =
 		le64_to_cpu(mac_control->stats_info->rmac_drop_frms);
+	dev->stats.multicast =
+		le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms) - 
+		sp->stats.multicast;
 	sp->stats.multicast =
 		le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
+	dev->stats.rx_length_errors =
+		le64_to_cpu(mac_control->stats_info->rmac_long_frms) - 
+		sp->stats.rx_length_errors;
 	sp->stats.rx_length_errors =
 		le64_to_cpu(mac_control->stats_info->rmac_long_frms);
 
 	/* collect per-ring rx_packets and rx_bytes */
-	sp->stats.rx_packets = sp->stats.rx_bytes = 0;
+	dev->stats.rx_packets = dev->stats.rx_bytes = 0;
 	for (i = 0; i < config->rx_ring_num; i++) {
-		sp->stats.rx_packets += mac_control->rings[i].rx_packets;
-		sp->stats.rx_bytes += mac_control->rings[i].rx_bytes;
+		dev->stats.rx_packets += mac_control->rings[i].rx_packets;
+		dev->stats.rx_bytes += mac_control->rings[i].rx_bytes;
 	}
 
-	return (&sp->stats);
+	return (&dev->stats);
 }
 
 /**
@@ -7419,7 +7436,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
 		if (err_mask != 0x5) {
 			DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
 				dev->name, err_mask);
-			sp->stats.rx_crc_errors++;
+			dev->stats.rx_crc_errors++;
 			sp->mac_control.stats_info->sw_stat.mem_freed
 				+= skb->truesize;
 			dev_kfree_skb(skb);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index c69ba1395fa..1c370e6aa64 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1,7 +1,7 @@
 /*
  *  SuperH Ethernet device driver
  *
- *  Copyright (C) 2006,2007 Nobuhiro Iwamatsu
+ *  Copyright (C) 2006-2008 Nobuhiro Iwamatsu
  *  Copyright (C) 2008 Renesas Solutions Corp.
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -20,7 +20,6 @@
  *  the file called "COPYING".
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
 #include <linux/etherdevice.h>
@@ -34,6 +33,29 @@
 
 #include "sh_eth.h"
 
+/* CPU <-> EDMAC endian convert */
+static inline __u32 cpu_to_edmac(struct sh_eth_private *mdp, u32 x)
+{
+	switch (mdp->edmac_endian) {
+	case EDMAC_LITTLE_ENDIAN:
+		return cpu_to_le32(x);
+	case EDMAC_BIG_ENDIAN:
+		return cpu_to_be32(x);
+	}
+	return x;
+}
+
+static inline __u32 edmac_to_cpu(struct sh_eth_private *mdp, u32 x)
+{
+	switch (mdp->edmac_endian) {
+	case EDMAC_LITTLE_ENDIAN:
+		return le32_to_cpu(x);
+	case EDMAC_BIG_ENDIAN:
+		return be32_to_cpu(x);
+	}
+	return x;
+}
+
 /*
  * Program the hardware MAC address from dev->dev_addr.
  */
@@ -143,13 +165,39 @@ static struct mdiobb_ops bb_ops = {
 	.get_mdio_data = sh_get_mdio,
 };
 
+/* Chip Reset */
 static void sh_eth_reset(struct net_device *ndev)
 {
 	u32 ioaddr = ndev->base_addr;
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	int cnt = 100;
+
+	ctrl_outl(EDSR_ENALL, ioaddr + EDSR);
+	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
+	while (cnt > 0) {
+		if (!(ctrl_inl(ioaddr + EDMR) & 0x3))
+			break;
+		mdelay(1);
+		cnt--;
+	}
+	if (cnt < 0)
+		printk(KERN_ERR "Device reset fail\n");
+
+	/* Table Init */
+	ctrl_outl(0x0, ioaddr + TDLAR);
+	ctrl_outl(0x0, ioaddr + TDFAR);
+	ctrl_outl(0x0, ioaddr + TDFXR);
+	ctrl_outl(0x0, ioaddr + TDFFR);
+	ctrl_outl(0x0, ioaddr + RDLAR);
+	ctrl_outl(0x0, ioaddr + RDFAR);
+	ctrl_outl(0x0, ioaddr + RDFXR);
+	ctrl_outl(0x0, ioaddr + RDFFR);
+#else
 	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
 	mdelay(3);
 	ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR);
+#endif
 }
 
 /* free skb and descriptor buffer */
@@ -180,6 +228,7 @@ static void sh_eth_ring_free(struct net_device *ndev)
 /* format skb and descriptor buffer */
 static void sh_eth_ring_format(struct net_device *ndev)
 {
+	u32 ioaddr = ndev->base_addr, reserve = 0;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	int i;
 	struct sk_buff *skb;
@@ -201,22 +250,41 @@ static void sh_eth_ring_format(struct net_device *ndev)
 		mdp->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
-		skb->dev = ndev;	/* Mark as being used by this device. */
+		skb->dev = ndev; /* Mark as being used by this device. */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+		reserve = SH7763_SKB_ALIGN
+			- ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1));
+		if (reserve)
+			skb_reserve(skb, reserve);
+#else
 		skb_reserve(skb, RX_OFFSET);
-
+#endif
 		/* RX descriptor */
 		rxdesc = &mdp->rx_ring[i];
 		rxdesc->addr = (u32)skb->data & ~0x3UL;
-		rxdesc->status = cpu_to_le32(RD_RACT | RD_RFP);
+		rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
 
 		/* The size of the buffer is 16 byte boundary. */
 		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
+		/* Rx descriptor address set */
+		if (i == 0) {
+			ctrl_outl((u32)rxdesc, ioaddr + RDLAR);
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+			ctrl_outl((u32)rxdesc, ioaddr + RDFAR);
+#endif
+		}
 	}
 
+	/* Rx descriptor address set */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	ctrl_outl((u32)rxdesc, ioaddr + RDFXR);
+	ctrl_outl(0x1, ioaddr + RDFFR);
+#endif
+
 	mdp->dirty_rx = (u32) (i - RX_RING_SIZE);
 
 	/* Mark the last entry as wrapping the ring. */
-	rxdesc->status |= cpu_to_le32(RC_RDEL);
+	rxdesc->status |= cpu_to_edmac(mdp, RD_RDEL);
 
 	memset(mdp->tx_ring, 0, tx_ringsize);
 
@@ -224,11 +292,24 @@ static void sh_eth_ring_format(struct net_device *ndev)
 	for (i = 0; i < TX_RING_SIZE; i++) {
 		mdp->tx_skbuff[i] = NULL;
 		txdesc = &mdp->tx_ring[i];
-		txdesc->status = cpu_to_le32(TD_TFP);
+		txdesc->status = cpu_to_edmac(mdp, TD_TFP);
 		txdesc->buffer_length = 0;
+		if (i == 0) {
+			/* Tx descriptor address set */
+			ctrl_outl((u32)txdesc, ioaddr + TDLAR);
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+			ctrl_outl((u32)txdesc, ioaddr + TDFAR);
+#endif
+		}
 	}
 
-	txdesc->status |= cpu_to_le32(TD_TDLE);
+	/* Tx descriptor address set */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	ctrl_outl((u32)txdesc, ioaddr + TDFXR);
+	ctrl_outl(0x1, ioaddr + TDFFR);
+#endif
+
+	txdesc->status |= cpu_to_edmac(mdp, TD_TDLE);
 }
 
 /* Get skb and descriptor buffer */
@@ -311,31 +392,43 @@ static int sh_eth_dev_init(struct net_device *ndev)
 	/* Soft Reset */
 	sh_eth_reset(ndev);
 
-	ctrl_outl(RPADIR_PADS1, ioaddr + RPADIR);	/* SH7712-DMA-RX-PAD2 */
+	/* Descriptor format */
+	sh_eth_ring_format(ndev);
+	ctrl_outl(RPADIR_INIT, ioaddr + RPADIR);
 
 	/* all sh_eth int mask */
 	ctrl_outl(0, ioaddr + EESIPR);
 
-	/* FIFO size set */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	ctrl_outl(EDMR_EL, ioaddr + EDMR);
+#else
 	ctrl_outl(0, ioaddr + EDMR);	/* Endian change */
+#endif
 
+	/* FIFO size set */
 	ctrl_outl((FIFO_SIZE_T | FIFO_SIZE_R), ioaddr + FDR);
 	ctrl_outl(0, ioaddr + TFTR);
 
+	/* Frame recv control */
 	ctrl_outl(0, ioaddr + RMCR);
 
 	rx_int_var = mdp->rx_int_var = DESC_I_RINT8 | DESC_I_RINT5;
 	tx_int_var = mdp->tx_int_var = DESC_I_TINT2;
 	ctrl_outl(rx_int_var | tx_int_var, ioaddr + TRSCER);
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	/* Burst sycle set */
+	ctrl_outl(0x800, ioaddr + BCULR);
+#endif
+
 	ctrl_outl((FIFO_F_D_RFF | FIFO_F_D_RFD), ioaddr + FCFTR);
-	ctrl_outl(0, ioaddr + TRIMD);
 
-	/* Descriptor format */
-	sh_eth_ring_format(ndev);
+#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
+	ctrl_outl(0, ioaddr + TRIMD);
+#endif
 
-	ctrl_outl((u32)mdp->rx_ring, ioaddr + RDLAR);
-	ctrl_outl((u32)mdp->tx_ring, ioaddr + TDLAR);
+	/* Recv frame limit set register */
+	ctrl_outl(RFLR_VALUE, ioaddr + RFLR);
 
 	ctrl_outl(ctrl_inl(ioaddr + EESR), ioaddr + EESR);
 	ctrl_outl((DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff), ioaddr + EESIPR);
@@ -345,21 +438,26 @@ static int sh_eth_dev_init(struct net_device *ndev)
 		ECMR_ZPF | (mdp->duplex ? ECMR_DM : 0) | ECMR_TE | ECMR_RE;
 
 	ctrl_outl(val, ioaddr + ECMR);
-	ctrl_outl(ECSR_BRCRX | ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD |
-		  ECSIPR_MPDIP, ioaddr + ECSR);
-	ctrl_outl(ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP |
-		  ECSIPR_ICDIP | ECSIPR_MPDIP, ioaddr + ECSIPR);
+
+	/* E-MAC Status Register clear */
+	ctrl_outl(ECSR_INIT, ioaddr + ECSR);
+
+	/* E-MAC Interrupt Enable register */
+	ctrl_outl(ECSIPR_INIT, ioaddr + ECSIPR);
 
 	/* Set MAC address */
 	update_mac_address(ndev);
 
 	/* mask reset */
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7763)
 	ctrl_outl(APR_AP, ioaddr + APR);
 	ctrl_outl(MPR_MP, ioaddr + MPR);
 	ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER);
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
 	ctrl_outl(BCFR_UNLIMITED, ioaddr + BCFR);
 #endif
+
 	/* Setting the Rx mode will start the Rx process. */
 	ctrl_outl(EDRRR_R, ioaddr + EDRRR);
 
@@ -379,7 +477,7 @@ static int sh_eth_txfree(struct net_device *ndev)
 	for (; mdp->cur_tx - mdp->dirty_tx > 0; mdp->dirty_tx++) {
 		entry = mdp->dirty_tx % TX_RING_SIZE;
 		txdesc = &mdp->tx_ring[entry];
-		if (txdesc->status & cpu_to_le32(TD_TACT))
+		if (txdesc->status & cpu_to_edmac(mdp, TD_TACT))
 			break;
 		/* Free the original skb. */
 		if (mdp->tx_skbuff[entry]) {
@@ -387,9 +485,9 @@ static int sh_eth_txfree(struct net_device *ndev)
 			mdp->tx_skbuff[entry] = NULL;
 			freeNum++;
 		}
-		txdesc->status = cpu_to_le32(TD_TFP);
+		txdesc->status = cpu_to_edmac(mdp, TD_TFP);
 		if (entry >= TX_RING_SIZE - 1)
-			txdesc->status |= cpu_to_le32(TD_TDLE);
+			txdesc->status |= cpu_to_edmac(mdp, TD_TDLE);
 
 		mdp->stats.tx_packets++;
 		mdp->stats.tx_bytes += txdesc->buffer_length;
@@ -407,11 +505,11 @@ static int sh_eth_rx(struct net_device *ndev)
 	int boguscnt = (mdp->dirty_rx + RX_RING_SIZE) - mdp->cur_rx;
 	struct sk_buff *skb;
 	u16 pkt_len = 0;
-	u32 desc_status;
+	u32 desc_status, reserve = 0;
 
 	rxdesc = &mdp->rx_ring[entry];
-	while (!(rxdesc->status & cpu_to_le32(RD_RACT))) {
-		desc_status = le32_to_cpu(rxdesc->status);
+	while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) {
+		desc_status = edmac_to_cpu(mdp, rxdesc->status);
 		pkt_len = rxdesc->frame_length;
 
 		if (--boguscnt < 0)
@@ -446,7 +544,7 @@ static int sh_eth_rx(struct net_device *ndev)
 			mdp->stats.rx_packets++;
 			mdp->stats.rx_bytes += pkt_len;
 		}
-		rxdesc->status |= cpu_to_le32(RD_RACT);
+		rxdesc->status |= cpu_to_edmac(mdp, RD_RACT);
 		entry = (++mdp->cur_rx) % RX_RING_SIZE;
 	}
 
@@ -454,28 +552,38 @@ static int sh_eth_rx(struct net_device *ndev)
 	for (; mdp->cur_rx - mdp->dirty_rx > 0; mdp->dirty_rx++) {
 		entry = mdp->dirty_rx % RX_RING_SIZE;
 		rxdesc = &mdp->rx_ring[entry];
+		/* The size of the buffer is 16 byte boundary. */
+		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
+
 		if (mdp->rx_skbuff[entry] == NULL) {
 			skb = dev_alloc_skb(mdp->rx_buf_sz);
 			mdp->rx_skbuff[entry] = skb;
 			if (skb == NULL)
 				break;	/* Better luck next round. */
 			skb->dev = ndev;
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+			reserve = SH7763_SKB_ALIGN
+				- ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1));
+			if (reserve)
+				skb_reserve(skb, reserve);
+#else
 			skb_reserve(skb, RX_OFFSET);
+#endif
+			skb->ip_summed = CHECKSUM_NONE;
 			rxdesc->addr = (u32)skb->data & ~0x3UL;
 		}
-		/* The size of the buffer is 16 byte boundary. */
-		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
 		if (entry >= RX_RING_SIZE - 1)
 			rxdesc->status |=
-			cpu_to_le32(RD_RACT | RD_RFP | RC_RDEL);
+				cpu_to_edmac(mdp, RD_RACT | RD_RFP | RD_RDEL);
 		else
 			rxdesc->status |=
-			cpu_to_le32(RD_RACT | RD_RFP);
+				cpu_to_edmac(mdp, RD_RACT | RD_RFP);
 	}
 
 	/* Restart Rx engine if stopped. */
 	/* If we don't need to check status, don't. -KDU */
-	ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR);
+	if (!(ctrl_inl(ndev->base_addr + EDRRR) & EDRRR_R))
+		ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR);
 
 	return 0;
 }
@@ -529,13 +637,14 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 			printk(KERN_ERR "Receive Frame Overflow\n");
 		}
 	}
-
+#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
 	if (intr_status & EESR_ADE) {
 		if (intr_status & EESR_TDE) {
 			if (intr_status & EESR_TFE)
 				mdp->stats.tx_fifo_errors++;
 		}
 	}
+#endif
 
 	if (intr_status & EESR_RDE) {
 		/* Receive Descriptor Empty int */
@@ -550,8 +659,11 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 		mdp->stats.rx_fifo_errors++;
 		printk(KERN_ERR "Receive FIFO Overflow\n");
 	}
-	if (intr_status &
-	    (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)) {
+	if (intr_status & (EESR_TWB | EESR_TABT |
+#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
+			EESR_ADE |
+#endif
+			EESR_TDE | EESR_TFE)) {
 		/* Tx error */
 		u32 edtrr = ctrl_inl(ndev->base_addr + EDTRR);
 		/* dmesg */
@@ -582,17 +694,23 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	ioaddr = ndev->base_addr;
 	spin_lock(&mdp->lock);
 
+	/* Get interrpt stat */
 	intr_status = ctrl_inl(ioaddr + EESR);
 	/* Clear interrupt */
 	ctrl_outl(intr_status, ioaddr + EESR);
 
-	if (intr_status & (EESR_FRC | EESR_RINT8 |
-			   EESR_RINT5 | EESR_RINT4 | EESR_RINT3 | EESR_RINT2 |
-			   EESR_RINT1))
+	if (intr_status & (EESR_FRC | /* Frame recv*/
+			EESR_RMAF | /* Multi cast address recv*/
+			EESR_RRF  | /* Bit frame recv */
+			EESR_RTLF | /* Long frame recv*/
+			EESR_RTSF | /* short frame recv */
+			EESR_PRE  | /* PHY-LSI recv error */
+			EESR_CERF)){ /* recv frame CRC error */
 		sh_eth_rx(ndev);
-	if (intr_status & (EESR_FTC |
-			   EESR_TINT4 | EESR_TINT3 | EESR_TINT2 | EESR_TINT1)) {
+	}
 
+	/* Tx Check */
+	if (intr_status & TX_CHECK) {
 		sh_eth_txfree(ndev);
 		netif_wake_queue(ndev);
 	}
@@ -631,11 +749,32 @@ static void sh_eth_adjust_link(struct net_device *ndev)
 		if (phydev->duplex != mdp->duplex) {
 			new_state = 1;
 			mdp->duplex = phydev->duplex;
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+			if (mdp->duplex) { /*  FULL */
+				ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM,
+						ioaddr + ECMR);
+			} else {	/* Half */
+				ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM,
+						ioaddr + ECMR);
+			}
+#endif
 		}
 
 		if (phydev->speed != mdp->speed) {
 			new_state = 1;
 			mdp->speed = phydev->speed;
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+			switch (mdp->speed) {
+			case 10: /* 10BASE */
+				ctrl_outl(GECMR_10, ioaddr + GECMR); break;
+			case 100:/* 100BASE */
+				ctrl_outl(GECMR_100, ioaddr + GECMR); break;
+			case 1000: /* 1000BASE */
+				ctrl_outl(GECMR_1000, ioaddr + GECMR); break;
+			default:
+				break;
+			}
+#endif
 		}
 		if (mdp->link == PHY_DOWN) {
 			ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_TXF)
@@ -730,7 +869,7 @@ static int sh_eth_open(struct net_device *ndev)
 	/* Set the timer to check for link beat. */
 	init_timer(&mdp->timer);
 	mdp->timer.expires = (jiffies + (24 * HZ)) / 10;/* 2.4 sec. */
-	setup_timer(&mdp->timer, sh_eth_timer, ndev);
+	setup_timer(&mdp->timer, sh_eth_timer, (unsigned long)ndev);
 
 	return ret;
 
@@ -814,13 +953,15 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 		txdesc->buffer_length = skb->len;
 
 	if (entry >= TX_RING_SIZE - 1)
-		txdesc->status |= cpu_to_le32(TD_TACT | TD_TDLE);
+		txdesc->status |= cpu_to_edmac(mdp, TD_TACT | TD_TDLE);
 	else
-		txdesc->status |= cpu_to_le32(TD_TACT);
+		txdesc->status |= cpu_to_edmac(mdp, TD_TACT);
 
 	mdp->cur_tx++;
 
-	ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR);
+	if (!(ctrl_inl(ndev->base_addr + EDTRR) & EDTRR_TRNS))
+		ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR);
+
 	ndev->trans_start = jiffies;
 
 	return 0;
@@ -877,9 +1018,15 @@ static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
 	ctrl_outl(0, ioaddr + CDCR);	/* (write clear) */
 	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + LCCR);
 	ctrl_outl(0, ioaddr + LCCR);	/* (write clear) */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CERCR);/* CERCR */
+	ctrl_outl(0, ioaddr + CERCR);	/* (write clear) */
+	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CEECR);/* CEECR */
+	ctrl_outl(0, ioaddr + CEECR);	/* (write clear) */
+#else
 	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CNDCR);
 	ctrl_outl(0, ioaddr + CNDCR);	/* (write clear) */
-
+#endif
 	return &mdp->stats;
 }
 
@@ -929,8 +1076,13 @@ static void sh_eth_tsu_init(u32 ioaddr)
 	ctrl_outl(0, ioaddr + TSU_FWSL0);
 	ctrl_outl(0, ioaddr + TSU_FWSL1);
 	ctrl_outl(TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, ioaddr + TSU_FWSLC);
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+	ctrl_outl(0, ioaddr + TSU_QTAG0);	/* Disable QTAG(0->1) */
+	ctrl_outl(0, ioaddr + TSU_QTAG1);	/* Disable QTAG(1->0) */
+#else
 	ctrl_outl(0, ioaddr + TSU_QTAGM0);	/* Disable QTAG(0->1) */
 	ctrl_outl(0, ioaddr + TSU_QTAGM1);	/* Disable QTAG(1->0) */
+#endif
 	ctrl_outl(0, ioaddr + TSU_FWSR);	/* all interrupt status clear */
 	ctrl_outl(0, ioaddr + TSU_FWINMK);	/* Disable all interrupt */
 	ctrl_outl(0, ioaddr + TSU_TEN);	/* Disable all CAM entry */
@@ -1029,6 +1181,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct net_device *ndev = NULL;
 	struct sh_eth_private *mdp;
+	struct sh_eth_plat_data *pd;
 
 	/* get base addr */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1066,8 +1219,11 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	mdp = netdev_priv(ndev);
 	spin_lock_init(&mdp->lock);
 
+	pd = (struct sh_eth_plat_data *)(pdev->dev.platform_data);
 	/* get PHY ID */
-	mdp->phy_id = (int)pdev->dev.platform_data;
+	mdp->phy_id = pd->phy;
+	/* EDMAC endian */
+	mdp->edmac_endian = pd->edmac_endian;
 
 	/* set function */
 	ndev->open = sh_eth_open;
@@ -1087,12 +1243,16 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 
 	/* First device only init */
 	if (!devno) {
+#if defined(ARSTR)
 		/* reset device */
-		ctrl_outl(ARSTR_ARSTR, ndev->base_addr + ARSTR);
+		ctrl_outl(ARSTR_ARSTR, ARSTR);
 		mdelay(1);
+#endif
 
+#if defined(SH_TSU_ADDR)
 		/* TSU init (Init only)*/
 		sh_eth_tsu_init(SH_TSU_ADDR);
+#endif
 	}
 
 	/* network device register */
@@ -1110,8 +1270,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	       ndev->name, CARDNAME, (u32) ndev->base_addr);
 
 	for (i = 0; i < 5; i++)
-		printk(KERN_INFO "%2.2x:", ndev->dev_addr[i]);
-	printk(KERN_INFO "%2.2x, IRQ %d.\n", ndev->dev_addr[i], ndev->irq);
+		printk("%02X:", ndev->dev_addr[i]);
+	printk("%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq);
 
 	platform_set_drvdata(pdev, ndev);
 
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index e01e1c34771..73bc7181cc1 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -30,120 +30,254 @@
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 
+#include <asm/sh_eth.h>
+
 #define CARDNAME	"sh-eth"
 #define TX_TIMEOUT	(5*HZ)
-
-#define TX_RING_SIZE	128	/* Tx ring size */
-#define RX_RING_SIZE	128	/* Rx ring size */
-#define RX_OFFSET		2	/* skb offset */
+#define TX_RING_SIZE	64	/* Tx ring size */
+#define RX_RING_SIZE	64	/* Rx ring size */
 #define ETHERSMALL		60
 #define PKT_BUF_SZ		1538
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+
+#define SH7763_SKB_ALIGN 32
 /* Chip Base Address */
-#define SH_TSU_ADDR 0xA7000804
+# define SH_TSU_ADDR  0xFFE01800
+# define ARSTR 		  0xFFE01800
 
 /* Chip Registers */
 /* E-DMAC */
-#define EDMR	0x0000
-#define EDTRR	0x0004
-#define EDRRR	0x0008
-#define TDLAR	0x000C
-#define RDLAR	0x0010
-#define EESR	0x0014
-#define EESIPR	0x0018
-#define TRSCER	0x001C
-#define RMFCR	0x0020
-#define TFTR	0x0024
-#define FDR		0x0028
-#define RMCR	0x002C
-#define EDOCR	0x0030
-#define FCFTR	0x0034
-#define RPADIR	0x0038
-#define TRIMD	0x003C
-#define RBWAR	0x0040
-#define RDFAR	0x0044
-#define TBRAR	0x004C
-#define TDFAR	0x0050
+# define EDSR    0x000
+# define EDMR    0x400
+# define EDTRR   0x408
+# define EDRRR   0x410
+# define EESR    0x428
+# define EESIPR  0x430
+# define TDLAR   0x010
+# define TDFAR   0x014
+# define TDFXR   0x018
+# define TDFFR   0x01C
+# define RDLAR   0x030
+# define RDFAR   0x034
+# define RDFXR   0x038
+# define RDFFR   0x03C
+# define TRSCER  0x438
+# define RMFCR   0x440
+# define TFTR    0x448
+# define FDR     0x450
+# define RMCR    0x458
+# define RPADIR  0x460
+# define FCFTR   0x468
+
+/* Ether Register */
+# define ECMR    0x500
+# define ECSR    0x510
+# define ECSIPR  0x518
+# define PIR     0x520
+# define PSR     0x528
+# define PIPR    0x52C
+# define RFLR    0x508
+# define APR     0x554
+# define MPR     0x558
+# define PFTCR	 0x55C
+# define PFRCR	 0x560
+# define TPAUSER 0x564
+# define GECMR   0x5B0
+# define BCULR   0x5B4
+# define MAHR    0x5C0
+# define MALR    0x5C8
+# define TROCR   0x700
+# define CDCR    0x708
+# define LCCR    0x710
+# define CEFCR   0x740
+# define FRECR   0x748
+# define TSFRCR  0x750
+# define TLFRCR  0x758
+# define RFCR    0x760
+# define CERCR   0x768
+# define CEECR   0x770
+# define MAFCR   0x778
+
+/* TSU Absolute Address */
+# define TSU_CTRST       0x004
+# define TSU_FWEN0       0x010
+# define TSU_FWEN1       0x014
+# define TSU_FCM         0x18
+# define TSU_BSYSL0      0x20
+# define TSU_BSYSL1      0x24
+# define TSU_PRISL0      0x28
+# define TSU_PRISL1      0x2C
+# define TSU_FWSL0       0x30
+# define TSU_FWSL1       0x34
+# define TSU_FWSLC       0x38
+# define TSU_QTAG0       0x40
+# define TSU_QTAG1       0x44
+# define TSU_FWSR        0x50
+# define TSU_FWINMK      0x54
+# define TSU_ADQT0       0x48
+# define TSU_ADQT1       0x4C
+# define TSU_VTAG0       0x58
+# define TSU_VTAG1       0x5C
+# define TSU_ADSBSY      0x60
+# define TSU_TEN         0x64
+# define TSU_POST1       0x70
+# define TSU_POST2       0x74
+# define TSU_POST3       0x78
+# define TSU_POST4       0x7C
+# define TSU_ADRH0       0x100
+# define TSU_ADRL0       0x104
+# define TSU_ADRH31      0x1F8
+# define TSU_ADRL31      0x1FC
+
+# define TXNLCR0         0x80
+# define TXALCR0         0x84
+# define RXNLCR0         0x88
+# define RXALCR0         0x8C
+# define FWNLCR0         0x90
+# define FWALCR0         0x94
+# define TXNLCR1         0xA0
+# define TXALCR1         0xA4
+# define RXNLCR1         0xA8
+# define RXALCR1         0xAC
+# define FWNLCR1         0xB0
+# define FWALCR1         0x40
+
+#else /* CONFIG_CPU_SUBTYPE_SH7763 */
+# define RX_OFFSET 2	/* skb offset */
+#ifndef CONFIG_CPU_SUBTYPE_SH7619
+/* Chip base address */
+# define SH_TSU_ADDR  0xA7000804
+# define ARSTR		  0xA7000800
+#endif
+/* Chip Registers */
+/* E-DMAC */
+# define EDMR	0x0000
+# define EDTRR	0x0004
+# define EDRRR	0x0008
+# define TDLAR	0x000C
+# define RDLAR	0x0010
+# define EESR	0x0014
+# define EESIPR	0x0018
+# define TRSCER	0x001C
+# define RMFCR	0x0020
+# define TFTR	0x0024
+# define FDR	0x0028
+# define RMCR	0x002C
+# define EDOCR	0x0030
+# define FCFTR	0x0034
+# define RPADIR	0x0038
+# define TRIMD	0x003C
+# define RBWAR	0x0040
+# define RDFAR	0x0044
+# define TBRAR	0x004C
+# define TDFAR	0x0050
+
 /* Ether Register */
-#define ECMR	0x0160
-#define ECSR	0x0164
-#define ECSIPR	0x0168
-#define PIR		0x016C
-#define MAHR	0x0170
-#define MALR	0x0174
-#define RFLR	0x0178
-#define PSR		0x017C
-#define TROCR	0x0180
-#define CDCR	0x0184
-#define LCCR	0x0188
-#define CNDCR	0x018C
-#define CEFCR	0x0194
-#define FRECR	0x0198
-#define TSFRCR	0x019C
-#define TLFRCR	0x01A0
-#define RFCR	0x01A4
-#define MAFCR	0x01A8
-#define IPGR	0x01B4
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
-#define APR		0x01B8
-#define MPR 	0x01BC
-#define TPAUSER 0x1C4
-#define BCFR	0x1CC
-#endif /* CONFIG_CPU_SH7710 */
-
-#define ARSTR	0x0800
+# define ECMR	0x0160
+# define ECSR	0x0164
+# define ECSIPR	0x0168
+# define PIR	0x016C
+# define MAHR	0x0170
+# define MALR	0x0174
+# define RFLR	0x0178
+# define PSR	0x017C
+# define TROCR	0x0180
+# define CDCR	0x0184
+# define LCCR	0x0188
+# define CNDCR	0x018C
+# define CEFCR	0x0194
+# define FRECR	0x0198
+# define TSFRCR	0x019C
+# define TLFRCR	0x01A0
+# define RFCR	0x01A4
+# define MAFCR	0x01A8
+# define IPGR	0x01B4
+# if defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define APR	0x01B8
+# define MPR 	0x01BC
+# define TPAUSER 0x1C4
+# define BCFR	0x1CC
+# endif /* CONFIG_CPU_SH7710 */
 
 /* TSU */
-#define TSU_CTRST	0x004
-#define TSU_FWEN0	0x010
-#define TSU_FWEN1	0x014
-#define TSU_FCM		0x018
-#define TSU_BSYSL0	0x020
-#define TSU_BSYSL1	0x024
-#define TSU_PRISL0	0x028
-#define TSU_PRISL1	0x02C
-#define TSU_FWSL0	0x030
-#define TSU_FWSL1	0x034
-#define TSU_FWSLC	0x038
-#define TSU_QTAGM0	0x040
-#define TSU_QTAGM1	0x044
-#define TSU_ADQT0 	0x048
-#define TSU_ADQT1	0x04C
-#define TSU_FWSR	0x050
-#define TSU_FWINMK	0x054
-#define TSU_ADSBSY	0x060
-#define TSU_TEN		0x064
-#define TSU_POST1	0x070
-#define TSU_POST2	0x074
-#define TSU_POST3	0x078
-#define TSU_POST4	0x07C
-#define TXNLCR0		0x080
-#define TXALCR0		0x084
-#define RXNLCR0		0x088
-#define RXALCR0		0x08C
-#define FWNLCR0		0x090
-#define FWALCR0		0x094
-#define TXNLCR1		0x0A0
-#define TXALCR1		0x0A4
-#define RXNLCR1		0x0A8
-#define RXALCR1		0x0AC
-#define FWNLCR1		0x0B0
-#define FWALCR1		0x0B4
+# define TSU_CTRST	0x004
+# define TSU_FWEN0	0x010
+# define TSU_FWEN1	0x014
+# define TSU_FCM	0x018
+# define TSU_BSYSL0	0x020
+# define TSU_BSYSL1	0x024
+# define TSU_PRISL0	0x028
+# define TSU_PRISL1	0x02C
+# define TSU_FWSL0	0x030
+# define TSU_FWSL1	0x034
+# define TSU_FWSLC	0x038
+# define TSU_QTAGM0	0x040
+# define TSU_QTAGM1	0x044
+# define TSU_ADQT0 	0x048
+# define TSU_ADQT1	0x04C
+# define TSU_FWSR	0x050
+# define TSU_FWINMK	0x054
+# define TSU_ADSBSY	0x060
+# define TSU_TEN	0x064
+# define TSU_POST1	0x070
+# define TSU_POST2	0x074
+# define TSU_POST3	0x078
+# define TSU_POST4	0x07C
+# define TXNLCR0	0x080
+# define TXALCR0	0x084
+# define RXNLCR0	0x088
+# define RXALCR0	0x08C
+# define FWNLCR0	0x090
+# define FWALCR0	0x094
+# define TXNLCR1	0x0A0
+# define TXALCR1	0x0A4
+# define RXNLCR1	0x0A8
+# define RXALCR1	0x0AC
+# define FWNLCR1	0x0B0
+# define FWALCR1	0x0B4
 
 #define TSU_ADRH0	0x0100
 #define TSU_ADRL0	0x0104
 #define TSU_ADRL31	0x01FC
 
-/* Register's bits */
+#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
+
+/*
+ * Register's bits
+ */
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+/* EDSR */
+enum EDSR_BIT {
+	EDSR_ENT = 0x01, EDSR_ENR = 0x02,
+};
+#define EDSR_ENALL (EDSR_ENT|EDSR_ENR)
+
+/* GECMR */
+enum GECMR_BIT {
+	GECMR_10 = 0x0, GECMR_100 = 0x04, GECMR_1000 = 0x01,
+};
+#endif
 
 /* EDMR */
 enum DMAC_M_BIT {
-	EDMR_DL1 = 0x20, EDMR_DL0 = 0x10, EDMR_SRST = 0x01,
+	EDMR_DL1 = 0x20, EDMR_DL0 = 0x10,
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+	EDMR_SRST	= 0x03,
+	EMDR_DESC_R	= 0x30, /* Descriptor reserve size */
+	EDMR_EL		= 0x40, /* Litte endian */
+#else /* CONFIG_CPU_SUBTYPE_SH7763 */
+	EDMR_SRST = 0x01,
+#endif
 };
 
 /* EDTRR */
 enum DMAC_T_BIT {
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+	EDTRR_TRNS = 0x03,
+#else
 	EDTRR_TRNS = 0x01,
+#endif
 };
 
 /* EDRRR*/
@@ -173,21 +307,47 @@ enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, };
 
 /* EESR */
 enum EESR_BIT {
-	EESR_TWB = 0x40000000, EESR_TABT = 0x04000000,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+	EESR_TWB  = 0x40000000,
+#else
+	EESR_TWB  = 0xC0000000,
+	EESR_TC1  = 0x20000000,
+	EESR_TUC  = 0x10000000,
+	EESR_ROC  = 0x80000000,
+#endif
+	EESR_TABT = 0x04000000,
 	EESR_RABT = 0x02000000, EESR_RFRMER = 0x01000000,
-	EESR_ADE = 0x00800000, EESR_ECI = 0x00400000,
-	EESR_FTC = 0x00200000, EESR_TDE = 0x00100000,
-	EESR_TFE = 0x00080000, EESR_FRC = 0x00040000,
-	EESR_RDE = 0x00020000, EESR_RFE = 0x00010000,
-	EESR_TINT4 = 0x00000800, EESR_TINT3 = 0x00000400,
-	EESR_TINT2 = 0x00000200, EESR_TINT1 = 0x00000100,
-	EESR_RINT8 = 0x00000080, EESR_RINT5 = 0x00000010,
-	EESR_RINT4 = 0x00000008, EESR_RINT3 = 0x00000004,
-	EESR_RINT2 = 0x00000002, EESR_RINT1 = 0x00000001,
-};
-
-#define EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+	EESR_ADE  = 0x00800000,
+#endif
+	EESR_ECI  = 0x00400000,
+	EESR_FTC  = 0x00200000, EESR_TDE  = 0x00100000,
+	EESR_TFE  = 0x00080000, EESR_FRC  = 0x00040000,
+	EESR_RDE  = 0x00020000, EESR_RFE  = 0x00010000,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+	EESR_CND  = 0x00000800,
+#endif
+	EESR_DLC  = 0x00000400,
+	EESR_CD   = 0x00000200, EESR_RTO  = 0x00000100,
+	EESR_RMAF = 0x00000080, EESR_CEEF = 0x00000040,
+	EESR_CELF = 0x00000020, EESR_RRF  = 0x00000010,
+	EESR_RTLF = 0x00000008, EESR_RTSF = 0x00000004,
+	EESR_PRE  = 0x00000002, EESR_CERF = 0x00000001,
+};
+
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define TX_CHECK (EESR_TC1 | EESR_FTC)
+# define EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
+		| EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI)
+# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE)
+
+#else
+# define TX_CHECK (EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO)
+# define EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
 		| EESR_RFRMER | EESR_ADE | EESR_TFE | EESR_TDE | EESR_ECI)
+# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)
+#endif
 
 /* EESIPR */
 enum DMAC_IM_BIT {
@@ -207,8 +367,8 @@ enum DMAC_IM_BIT {
 
 /* Receive descriptor bit */
 enum RD_STS_BIT {
-	RD_RACT = 0x80000000, RC_RDEL = 0x40000000,
-	RC_RFP1 = 0x20000000, RC_RFP0 = 0x10000000,
+	RD_RACT = 0x80000000, RD_RDEL = 0x40000000,
+	RD_RFP1 = 0x20000000, RD_RFP0 = 0x10000000,
 	RD_RFE = 0x08000000, RD_RFS10 = 0x00000200,
 	RD_RFS9 = 0x00000100, RD_RFS8 = 0x00000080,
 	RD_RFS7 = 0x00000040, RD_RFS6 = 0x00000020,
@@ -216,9 +376,9 @@ enum RD_STS_BIT {
 	RD_RFS3 = 0x00000004, RD_RFS2 = 0x00000002,
 	RD_RFS1 = 0x00000001,
 };
-#define RDF1ST	RC_RFP1
-#define RDFEND	RC_RFP0
-#define RD_RFP	(RC_RFP1|RC_RFP0)
+#define RDF1ST	RD_RFP1
+#define RDFEND	RD_RFP0
+#define RD_RFP	(RD_RFP1|RD_RFP0)
 
 /* FCFTR */
 enum FCFTR_BIT {
@@ -227,11 +387,16 @@ enum FCFTR_BIT {
 	FCFTR_RFD1 = 0x00000002, FCFTR_RFD0 = 0x00000001,
 };
 #define FIFO_F_D_RFF	(FCFTR_RFF2|FCFTR_RFF1|FCFTR_RFF0)
+#ifndef CONFIG_CPU_SUBTYPE_SH7619
 #define FIFO_F_D_RFD	(FCFTR_RFD2|FCFTR_RFD1|FCFTR_RFD0)
+#else
+#define FIFO_F_D_RFD	(FCFTR_RFD0)
+#endif
 
 /* Transfer descriptor bit */
 enum TD_STS_BIT {
-	TD_TACT = 0x80000000, TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000,
+	TD_TACT = 0x80000000,
+	TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000,
 	TD_TFP0 = 0x10000000,
 };
 #define TDF1ST	TD_TFP1
@@ -242,6 +407,10 @@ enum TD_STS_BIT {
 enum RECV_RST_BIT { RMCR_RST = 0x01, };
 /* ECMR */
 enum FELIC_MODE_BIT {
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+	ECMR_TRCCM = 0x04000000, ECMR_RCSC = 0x00800000,
+	ECMR_DPAD = 0x00200000, ECMR_RZPF = 0x00100000,
+#endif
 	ECMR_ZPF = 0x00080000, ECMR_PFR = 0x00040000, ECMR_RXF = 0x00020000,
 	ECMR_TXF = 0x00010000, ECMR_MCT = 0x00002000, ECMR_PRCEF = 0x00001000,
 	ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020,
@@ -249,18 +418,47 @@ enum FELIC_MODE_BIT {
 	ECMR_PRM = 0x00000001,
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+#define ECMR_CHG_DM	(ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\
+			ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
+#elif CONFIG_CPU_SUBTYPE_SH7619
+#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF)
+#else
+#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
+#endif
+
 /* ECSR */
 enum ECSR_STATUS_BIT {
-	ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10, ECSR_LCHNG = 0x04,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+	ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10,
+#endif
+	ECSR_LCHNG = 0x04,
 	ECSR_MPD = 0x02, ECSR_ICD = 0x01,
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP)
+#else
+# define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \
+			ECSR_LCHNG | ECSR_ICD | ECSIPR_MPDIP)
+#endif
+
 /* ECSIPR */
 enum ECSIPR_STATUS_MASK_BIT {
-	ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10, ECSIPR_LCHNGIP = 0x04,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+	ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10,
+#endif
+	ECSIPR_LCHNGIP = 0x04,
 	ECSIPR_MPDIP = 0x02, ECSIPR_ICDIP = 0x01,
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP)
+#else
+# define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \
+				ECSIPR_ICDIP | ECSIPR_MPDIP)
+#endif
+
 /* APR */
 enum APR_BIT {
 	APR_AP = 0x00000001,
@@ -285,9 +483,22 @@ enum RPADIR_BIT {
 	RPADIR_PADR = 0x0003f,
 };
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+# define RPADIR_INIT (0x00)
+#else
+# define RPADIR_INIT (RPADIR_PADS1)
+#endif
+
+/* RFLR */
+#define RFLR_VALUE 0x1000
+
 /* FDR */
 enum FIFO_SIZE_BIT {
+#ifndef CONFIG_CPU_SUBTYPE_SH7619
 	FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007,
+#else
+	FIFO_SIZE_T = 0x00000100, FIFO_SIZE_R = 0x00000001,
+#endif
 };
 enum phy_offsets {
 	PHY_CTRL = 0, PHY_STAT = 1, PHY_IDT1 = 2, PHY_IDT2 = 3,
@@ -316,7 +527,7 @@ enum PHY_ANA_BIT {
 	PHY_A_NP = 0x8000, PHY_A_ACK = 0x4000, PHY_A_RF = 0x2000,
 	PHY_A_FCS = 0x0400, PHY_A_T4 = 0x0200, PHY_A_FDX = 0x0100,
 	PHY_A_HDX = 0x0080, PHY_A_10FDX = 0x0040, PHY_A_10HDX = 0x0020,
-	PHY_A_SEL = 0x001f,
+	PHY_A_SEL = 0x001e,
 };
 /* PHY_ANL */
 enum PHY_ANL_BIT {
@@ -403,7 +614,7 @@ struct sh_eth_txdesc {
 #endif
 	u32 addr;		/* TD2 */
 	u32 pad1;		/* padding data */
-};
+} __attribute__((aligned(2), packed));
 
 /*
  * The sh ether Rx buffer descriptors.
@@ -420,7 +631,7 @@ struct sh_eth_rxdesc {
 #endif
 	u32 addr;		/* RD2 */
 	u32 pad0;		/* padding data */
-};
+} __attribute__((aligned(2), packed));
 
 struct sh_eth_private {
 	dma_addr_t rx_desc_dma;
@@ -435,6 +646,7 @@ struct sh_eth_private {
 	u32 cur_rx, dirty_rx;	/* Producer/consumer ring indices */
 	u32 cur_tx, dirty_tx;
 	u32 rx_buf_sz;		/* Based on MTU+slack. */
+	int edmac_endian;
 	/* MII transceiver section. */
 	u32 phy_id;					/* PHY ID */
 	struct mii_bus *mii_bus;	/* MDIO bus control */
@@ -449,6 +661,10 @@ struct sh_eth_private {
 	struct net_device_stats tsu_stats;	/* TSU forward status */
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+/* SH7763 has endian control register */
+#define swaps(x, y)
+#else
 static void swaps(char *src, int len)
 {
 #ifdef __LITTLE_ENDIAN__
@@ -460,5 +676,5 @@ static void swaps(char *src, int len)
 		*p = swab32(*p);
 #endif
 }
-
+#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
 #endif
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index 889f9872461..a85efcfd9d0 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -510,7 +510,7 @@ static void ess_send_response(struct s_smc *smc, struct smt_header *sm,
 	chg->path.para.p_type = SMT_P320B ;
 	chg->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
 	chg->path.mib_index = SBAPATHINDEX ;
-	chg->path.path_pad = (u_short)NULL ;
+	chg->path.path_pad = 0;
 	chg->path.path_index = PRIMARY_RING ;
 
 	/* set P320F */
@@ -606,7 +606,7 @@ static void ess_send_alc_req(struct s_smc *smc)
 	req->path.para.p_type = SMT_P320B ;
 	req->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
 	req->path.mib_index = SBAPATHINDEX ;
-	req->path.path_pad = (u_short)NULL ;
+	req->path.path_pad = 0;
 	req->path.path_index = PRIMARY_RING ;
 
 	/* set P0017 */
@@ -636,7 +636,7 @@ static void ess_send_alc_req(struct s_smc *smc)
 	/* set P19 */
 	req->a_addr.para.p_type = SMT_P0019 ;
 	req->a_addr.para.p_len = sizeof(struct smt_p_0019) - PARA_LEN ;
-	req->a_addr.sba_pad = (u_short)NULL ;
+	req->a_addr.sba_pad = 0;
 	req->a_addr.alloc_addr = null_addr ;
 
 	/* set P1A */
diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c
index ffbfb1b79f9..805383b33d3 100644
--- a/drivers/net/skfp/smt.c
+++ b/drivers/net/skfp/smt.c
@@ -19,6 +19,7 @@
 #include "h/smc.h"
 #include "h/smt_p.h"
 #include <linux/bitrev.h>
+#include <linux/kernel.h>
 
 #define KERNEL
 #include "h/smtstate.h"
@@ -1730,20 +1731,18 @@ void fddi_send_antc(struct s_smc *smc, struct fddi_addr *dest)
 #endif
 
 #ifdef	DEBUG
-#define hextoasc(x)	"0123456789abcdef"[x]
-
 char *addr_to_string(struct fddi_addr *addr)
 {
 	int	i ;
 	static char	string[6*3] = "****" ;
 
 	for (i = 0 ; i < 6 ; i++) {
-		string[i*3] = hextoasc((addr->a[i]>>4)&0xf) ;
-		string[i*3+1] = hextoasc((addr->a[i])&0xf) ;
-		string[i*3+2] = ':' ;
+		string[i * 3] = hex_asc_hi(addr->a[i]);
+		string[i * 3 + 1] = hex_asc_lo(addr->a[i]);
+		string[i * 3 + 2] = ':';
 	}
-	string[5*3+2] = 0 ;
-	return(string) ;
+	string[5 * 3 + 2] = 0;
+	return(string);
 }
 #endif
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 5257cf464f1..e24b25ca1c6 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -24,7 +24,6 @@
 
 #include <linux/crc32.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/dma-mapping.h>
@@ -275,86 +274,6 @@ static void sky2_power_aux(struct sky2_hw *hw)
 			     PC_VAUX_ON | PC_VCC_OFF));
 }
 
-static void sky2_power_state(struct sky2_hw *hw, pci_power_t state)
-{
-	u16 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
-	int pex = pci_find_capability(hw->pdev, PCI_CAP_ID_EXP);
-	u32 reg;
-
-	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
-	switch (state) {
-	case PCI_D0:
-		break;
-
-	case PCI_D1:
-		power_control |= 1;
-		break;
-
-	case PCI_D2:
-		power_control |= 2;
-		break;
-
-	case PCI_D3hot:
-	case PCI_D3cold:
-		power_control |= 3;
-		if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
-			/* additional power saving measurements */
-			reg = sky2_pci_read32(hw, PCI_DEV_REG4);
-
-			/* set gating core clock for LTSSM in L1 state */
-			reg |= P_PEX_LTSSM_STAT(P_PEX_LTSSM_L1_STAT) |
-				/* auto clock gated scheme controlled by CLKREQ */
-				P_ASPM_A1_MODE_SELECT |
-				/* enable Gate Root Core Clock */
-				P_CLK_GATE_ROOT_COR_ENA;
-
-			if (pex && (hw->flags & SKY2_HW_CLK_POWER)) {
-				/* enable Clock Power Management (CLKREQ) */
-				u16 ctrl = sky2_pci_read16(hw, pex + PCI_EXP_DEVCTL);
-
-				ctrl |= PCI_EXP_DEVCTL_AUX_PME;
-				sky2_pci_write16(hw, pex + PCI_EXP_DEVCTL, ctrl);
-			} else
-				/* force CLKREQ Enable in Our4 (A1b only) */
-				reg |= P_ASPM_FORCE_CLKREQ_ENA;
-
-			/* set Mask Register for Release/Gate Clock */
-			sky2_pci_write32(hw, PCI_DEV_REG5,
-					 P_REL_PCIE_EXIT_L1_ST | P_GAT_PCIE_ENTER_L1_ST |
-					 P_REL_PCIE_RX_EX_IDLE | P_GAT_PCIE_RX_EL_IDLE |
-					 P_REL_GPHY_LINK_UP | P_GAT_GPHY_LINK_DOWN);
-		} else
-			sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_CLK_HALT);
-
-		/* put CPU into reset state */
-		sky2_write8(hw,  B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_RESET);
-		if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev == CHIP_REV_YU_SU_A0)
-			/* put CPU into halt state */
-			sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_HALTED);
-
-		if (pex && !(hw->flags & SKY2_HW_RAM_BUFFER)) {
-			reg = sky2_pci_read32(hw, PCI_DEV_REG1);
-			/* force to PCIe L1 */
-			reg |= PCI_FORCE_PEX_L1;
-			sky2_pci_write32(hw, PCI_DEV_REG1, reg);
-		}
-		break;
-
-	default:
-		dev_warn(&hw->pdev->dev, PFX "Invalid power state (%d) ",
-		       state);
-		return;
-	}
-
-	power_control |= PCI_PM_CTRL_PME_ENABLE;
-	/* Finally, set the new power state. */
-	sky2_pci_write32(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
-
-	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-	sky2_pci_read32(hw, B0_CTST);
-}
-
 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
 {
 	u16 reg;
@@ -709,6 +628,11 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	sky2_pci_read32(hw, PCI_DEV_REG1);
+
+	if (hw->chip_id == CHIP_ID_YUKON_FE)
+		gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
+	else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
+		sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
 }
 
 static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
@@ -741,11 +665,16 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
 
 	if (hw->chip_id != CHIP_ID_YUKON_EC) {
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-			ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+			/* select page 2 to access MAC control register */
+			gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
 
+			ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
 			/* enable Power Down */
 			ctrl |= PHY_M_PC_POW_D_ENA;
 			gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+			/* set page register back to 0 */
+			gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
 		}
 
 		/* set IEEE compatible Power Down Mode (dev. #4.99) */
@@ -2855,10 +2784,6 @@ static int __devinit sky2_init(struct sky2_hw *hw)
 		hw->flags = SKY2_HW_GIGABIT
 			| SKY2_HW_NEWER_PHY
 			| SKY2_HW_ADV_POWER_CTL;
-
-		/* check for Rev. A1 dev 4200 */
-		if (sky2_read16(hw, Q_ADDR(Q_XA1, Q_WM)) == 0)
-			hw->flags |= SKY2_HW_CLK_POWER;
 		break;
 
 	case CHIP_ID_YUKON_EX:
@@ -2914,12 +2839,6 @@ static int __devinit sky2_init(struct sky2_hw *hw)
 	if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
 		hw->flags |= SKY2_HW_FIBRE_PHY;
 
-	hw->pm_cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PM);
-	if (hw->pm_cap == 0) {
-		dev_err(&hw->pdev->dev, "cannot find PowerManagement capability\n");
-		return -EIO;
-	}
-
 	hw->ports = 1;
 	t8 = sky2_read8(hw, B2_Y2_HW_RES);
 	if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
@@ -4512,7 +4431,7 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	pci_save_state(pdev);
 	pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
-	sky2_power_state(hw, pci_choose_state(pdev, state));
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 
 	return 0;
 }
@@ -4525,7 +4444,9 @@ static int sky2_resume(struct pci_dev *pdev)
 	if (!hw)
 		return 0;
 
-	sky2_power_state(hw, PCI_D0);
+	err = pci_set_power_state(pdev, PCI_D0);
+	if (err)
+		goto out;
 
 	err = pci_restore_state(pdev);
 	if (err)
@@ -4595,7 +4516,7 @@ static void sky2_shutdown(struct pci_dev *pdev)
 	pci_enable_wake(pdev, PCI_D3cold, wol);
 
 	pci_disable_device(pdev);
-	sky2_power_state(hw, PCI_D3hot);
+	pci_set_power_state(pdev, PCI_D3hot);
 }
 
 static struct pci_driver sky2_driver = {
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 4d9c4a19bb8..92fb24b27d4 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2072,9 +2072,7 @@ struct sky2_hw {
 #define SKY2_HW_NEW_LE		0x00000020	/* new LSOv2 format */
 #define SKY2_HW_AUTO_TX_SUM	0x00000040	/* new IP decode for Tx */
 #define SKY2_HW_ADV_POWER_CTL	0x00000080	/* additional PHY power regs */
-#define SKY2_HW_CLK_POWER	0x00000100	/* clock power management */
 
-	int		     pm_cap;
 	u8	     	     chip_id;
 	u8		     chip_rev;
 	u8		     pmd_type;
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 76c17c28fab..2abfc284519 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -222,7 +222,7 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
  */
 #include <linux/dma-mapping.h>
 #include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 static dma_addr_t rx_dmabuf, tx_dmabuf;
 static int rx_dmalen, tx_dmalen;
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 2040965d772..24768c10cad 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -2255,7 +2255,7 @@ static int smc_drv_remove(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
 	if (!res)
-		platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, SMC_IO_EXTENT);
 
 	free_netdev(ndev);
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 22209b6f140..997e7f1d5c6 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -187,7 +187,7 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 
 #elif defined(CONFIG_SA1100_ASSABET)
 
-#include <asm/arch/neponset.h>
+#include <mach/neponset.h>
 
 /* We can only do 8-bit reads and writes in the static memory space. */
 #define SMC_CAN_USE_8BIT	1
@@ -339,7 +339,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
  * IOBARRIER on entry to their ISR.
  */
 
-#include <asm/arch/constants.h>	/* IOBARRIER_VIRT */
+#include <mach/constants.h>	/* IOBARRIER_VIRT */
 
 #define SMC_CAN_USE_8BIT	0
 #define SMC_CAN_USE_16BIT	1
@@ -525,7 +525,7 @@ struct smc_local {
  */
 #include <linux/dma-mapping.h>
 #include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #ifdef SMC_insl
 #undef SMC_insl
diff --git a/drivers/net/stnic.c b/drivers/net/stnic.c
index b65be5d70fe..2ed0bd59681 100644
--- a/drivers/net/stnic.c
+++ b/drivers/net/stnic.c
@@ -19,7 +19,7 @@
 
 #include <asm/system.h>
 #include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #include <asm/machvec.h>
 #ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index 9b2a7f7bb25..e531302d95f 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -425,14 +425,11 @@ static int init586(struct net_device *dev)
 		int len = ((char *) p->iscp - (char *) ptr - 8) / 6;
 		if(num_addrs > len)	{
 			printk("%s: switching to promisc. mode\n",dev->name);
-			dev->flags|=IFF_PROMISC;
+			cfg_cmd->promisc = 1;
 		}
 	}
 	if(dev->flags&IFF_PROMISC)
-	{
-			 cfg_cmd->promisc=1;
-			 dev->flags|=IFF_PROMISC;
-	}
+		cfg_cmd->promisc = 1;
 	cfg_cmd->carr_coll	= 0x00;
 
 	p->scb->cbl_offset	= make16(cfg_cmd);
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index c66dfc9ec1e..7db48f1cd94 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -27,7 +27,6 @@
 #include <linux/sched.h>
 #include <linux/tty.h>
 #include <linux/if_vlan.h>
-#include <linux/version.h>
 #include <linux/interrupt.h>
 #include <linux/vmalloc.h>
 #include <asm/byteorder.h>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 633c128a622..71d2c5cfdad 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -66,8 +66,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.93"
-#define DRV_MODULE_RELDATE	"May 22, 2008"
+#define DRV_MODULE_VERSION	"3.94"
+#define DRV_MODULE_RELDATE	"August 14, 2008"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -536,6 +536,7 @@ static int tg3_ape_lock(struct tg3 *tp, int locknum)
 		return 0;
 
 	switch (locknum) {
+		case TG3_APE_LOCK_GRC:
 		case TG3_APE_LOCK_MEM:
 			break;
 		default:
@@ -573,6 +574,7 @@ static void tg3_ape_unlock(struct tg3 *tp, int locknum)
 		return;
 
 	switch (locknum) {
+		case TG3_APE_LOCK_GRC:
 		case TG3_APE_LOCK_MEM:
 			break;
 		default:
@@ -1018,15 +1020,43 @@ static void tg3_mdio_fini(struct tg3 *tp)
 }
 
 /* tp->lock is held. */
+static inline void tg3_generate_fw_event(struct tg3 *tp)
+{
+	u32 val;
+
+	val = tr32(GRC_RX_CPU_EVENT);
+	val |= GRC_RX_CPU_DRIVER_EVENT;
+	tw32_f(GRC_RX_CPU_EVENT, val);
+
+	tp->last_event_jiffies = jiffies;
+}
+
+#define TG3_FW_EVENT_TIMEOUT_USEC 2500
+
+/* tp->lock is held. */
 static void tg3_wait_for_event_ack(struct tg3 *tp)
 {
 	int i;
+	unsigned int delay_cnt;
+	long time_remain;
+
+	/* If enough time has passed, no wait is necessary. */
+	time_remain = (long)(tp->last_event_jiffies + 1 +
+		      usecs_to_jiffies(TG3_FW_EVENT_TIMEOUT_USEC)) -
+		      (long)jiffies;
+	if (time_remain < 0)
+		return;
+
+	/* Check if we can shorten the wait time. */
+	delay_cnt = jiffies_to_usecs(time_remain);
+	if (delay_cnt > TG3_FW_EVENT_TIMEOUT_USEC)
+		delay_cnt = TG3_FW_EVENT_TIMEOUT_USEC;
+	delay_cnt = (delay_cnt >> 3) + 1;
 
-	/* Wait for up to 2.5 milliseconds */
-	for (i = 0; i < 250000; i++) {
+	for (i = 0; i < delay_cnt; i++) {
 		if (!(tr32(GRC_RX_CPU_EVENT) & GRC_RX_CPU_DRIVER_EVENT))
 			break;
-		udelay(10);
+		udelay(8);
 	}
 }
 
@@ -1075,9 +1105,7 @@ static void tg3_ump_link_report(struct tg3 *tp)
 		val = 0;
 	tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX + 12, val);
 
-	val = tr32(GRC_RX_CPU_EVENT);
-	val |= GRC_RX_CPU_DRIVER_EVENT;
-	tw32_f(GRC_RX_CPU_EVENT, val);
+	tg3_generate_fw_event(tp);
 }
 
 static void tg3_link_report(struct tg3 *tp)
@@ -1982,8 +2010,6 @@ static void tg3_power_down_phy(struct tg3 *tp)
 static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 {
 	u32 misc_host_ctrl;
-	u16 power_control, power_caps;
-	int pm = tp->pm_cap;
 
 	/* Make sure register accesses (indirect or otherwise)
 	 * will function correctly.
@@ -1992,18 +2018,10 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 			       TG3PCI_MISC_HOST_CTRL,
 			       tp->misc_host_ctrl);
 
-	pci_read_config_word(tp->pdev,
-			     pm + PCI_PM_CTRL,
-			     &power_control);
-	power_control |= PCI_PM_CTRL_PME_STATUS;
-	power_control &= ~(PCI_PM_CTRL_STATE_MASK);
 	switch (state) {
 	case PCI_D0:
-		power_control |= 0;
-		pci_write_config_word(tp->pdev,
-				      pm + PCI_PM_CTRL,
-				      power_control);
-		udelay(100);	/* Delay after power state change */
+		pci_enable_wake(tp->pdev, state, false);
+		pci_set_power_state(tp->pdev, PCI_D0);
 
 		/* Switch out of Vaux if it is a NIC */
 		if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
@@ -2012,26 +2030,15 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 		return 0;
 
 	case PCI_D1:
-		power_control |= 1;
-		break;
-
 	case PCI_D2:
-		power_control |= 2;
-		break;
-
 	case PCI_D3hot:
-		power_control |= 3;
 		break;
 
 	default:
-		printk(KERN_WARNING PFX "%s: Invalid power state (%d) "
-		       "requested.\n",
-		       tp->dev->name, state);
+		printk(KERN_ERR PFX "%s: Invalid power state (D%d) requested\n",
+			tp->dev->name, state);
 		return -EINVAL;
 	}
-
-	power_control |= PCI_PM_CTRL_PME_ENABLE;
-
 	misc_host_ctrl = tr32(TG3PCI_MISC_HOST_CTRL);
 	tw32(TG3PCI_MISC_HOST_CTRL,
 	     misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT);
@@ -2109,8 +2116,6 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 						     WOL_DRV_WOL |
 						     WOL_SET_MAGIC_PKT);
 
-	pci_read_config_word(tp->pdev, pm + PCI_PM_PMC, &power_caps);
-
 	if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) {
 		u32 mac_mode;
 
@@ -2143,10 +2148,17 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 		if (!(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
 			tw32(MAC_LED_CTRL, tp->led_ctrl);
 
-		if (((power_caps & PCI_PM_CAP_PME_D3cold) &&
-		     (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)))
+		if (pci_pme_capable(tp->pdev, state) &&
+		     (tp->tg3_flags & TG3_FLAG_WOL_ENABLE))
 			mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE;
 
+		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+			mac_mode |= tp->mac_mode &
+				    (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
+			if (mac_mode & MAC_MODE_APE_TX_EN)
+				mac_mode |= MAC_MODE_TDE_ENABLE;
+		}
+
 		tw32_f(MAC_MODE, mac_mode);
 		udelay(100);
 
@@ -2236,9 +2248,11 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 
 	tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
 
+	if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)
+		pci_enable_wake(tp->pdev, state, true);
+
 	/* Finally, set the new power state. */
-	pci_write_config_word(tp->pdev, pm + PCI_PM_CTRL, power_control);
-	udelay(100);	/* Delay after power state change */
+	pci_set_power_state(tp->pdev, state);
 
 	return 0;
 }
@@ -5514,7 +5528,7 @@ static void tg3_ape_send_event(struct tg3 *tp, u32 event)
 		return;
 
 	apedata = tg3_ape_read32(tp, TG3_APE_FW_STATUS);
-	if (apedata != APE_FW_STATUS_READY)
+	if (!(apedata & APE_FW_STATUS_READY))
 		return;
 
 	/* Wait for up to 1 millisecond for APE to service previous event. */
@@ -5781,6 +5795,8 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 	tg3_mdio_stop(tp);
 
+	tg3_ape_lock(tp, TG3_APE_LOCK_GRC);
+
 	/* No matching tg3_nvram_unlock() after this because
 	 * chip reset below will undo the nvram lock.
 	 */
@@ -5929,12 +5945,19 @@ static int tg3_chip_reset(struct tg3 *tp)
 	} else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
 		tp->mac_mode = MAC_MODE_PORT_MODE_GMII;
 		tw32_f(MAC_MODE, tp->mac_mode);
+	} else if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+		tp->mac_mode &= (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
+		if (tp->mac_mode & MAC_MODE_APE_TX_EN)
+			tp->mac_mode |= MAC_MODE_TDE_ENABLE;
+		tw32_f(MAC_MODE, tp->mac_mode);
 	} else
 		tw32_f(MAC_MODE, 0);
 	udelay(40);
 
 	tg3_mdio_start(tp);
 
+	tg3_ape_unlock(tp, TG3_APE_LOCK_GRC);
+
 	err = tg3_poll_fw(tp);
 	if (err)
 		return err;
@@ -5956,6 +5979,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 		tg3_read_mem(tp, NIC_SRAM_DATA_CFG, &nic_cfg);
 		if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
 			tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
+			tp->last_event_jiffies = jiffies;
 			if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
 				tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
 		}
@@ -5969,15 +5993,12 @@ static void tg3_stop_fw(struct tg3 *tp)
 {
 	if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
 	   !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
-		u32 val;
-
 		/* Wait for RX cpu to ACK the previous event. */
 		tg3_wait_for_event_ack(tp);
 
 		tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_PAUSE_FW);
-		val = tr32(GRC_RX_CPU_EVENT);
-		val |= GRC_RX_CPU_DRIVER_EVENT;
-		tw32(GRC_RX_CPU_EVENT, val);
+
+		tg3_generate_fw_event(tp);
 
 		/* Wait for RX cpu to ACK this event. */
 		tg3_wait_for_event_ack(tp);
@@ -7427,7 +7448,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		udelay(10);
 	}
 
-	tp->mac_mode = MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+		tp->mac_mode &= MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
+	else
+		tp->mac_mode = 0;
+	tp->mac_mode |= MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
 		MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
 	    !(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
@@ -7708,21 +7733,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
  */
 static int tg3_init_hw(struct tg3 *tp, int reset_phy)
 {
-	int err;
-
-	/* Force the chip into D0. */
-	err = tg3_set_power_state(tp, PCI_D0);
-	if (err)
-		goto out;
-
 	tg3_switch_clocks(tp);
 
 	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
 
-	err = tg3_reset_hw(tp, reset_phy);
-
-out:
-	return err;
+	return tg3_reset_hw(tp, reset_phy);
 }
 
 #define TG3_STAT_ADD32(PSTAT, REG) \
@@ -7871,9 +7886,8 @@ static void tg3_timer(unsigned long __opaque)
 	 * resets.
 	 */
 	if (!--tp->asf_counter) {
-		if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
-			u32 val;
-
+		if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
+		    !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
 			tg3_wait_for_event_ack(tp);
 
 			tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX,
@@ -7881,9 +7895,8 @@ static void tg3_timer(unsigned long __opaque)
 			tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
 			/* 5 seconds timeout */
 			tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5);
-			val = tr32(GRC_RX_CPU_EVENT);
-			val |= GRC_RX_CPU_DRIVER_EVENT;
-			tw32_f(GRC_RX_CPU_EVENT, val);
+
+			tg3_generate_fw_event(tp);
 		}
 		tp->asf_counter = tp->asf_multiplier;
 	}
@@ -8037,13 +8050,11 @@ static int tg3_open(struct net_device *dev)
 
 	netif_carrier_off(tp->dev);
 
-	tg3_full_lock(tp, 0);
-
 	err = tg3_set_power_state(tp, PCI_D0);
-	if (err) {
-		tg3_full_unlock(tp);
+	if (err)
 		return err;
-	}
+
+	tg3_full_lock(tp, 0);
 
 	tg3_disable_ints(tp);
 	tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
@@ -8455,6 +8466,11 @@ static inline unsigned long get_stat64(tg3_stat64_t *val)
 	return ret;
 }
 
+static inline u64 get_estat64(tg3_stat64_t *val)
+{
+       return ((u64)val->high << 32) | ((u64)val->low);
+}
+
 static unsigned long calc_crc_errors(struct tg3 *tp)
 {
 	struct tg3_hw_stats *hw_stats = tp->hw_stats;
@@ -8483,7 +8499,7 @@ static unsigned long calc_crc_errors(struct tg3 *tp)
 
 #define ESTAT_ADD(member) \
 	estats->member =	old_estats->member + \
-				get_stat64(&hw_stats->member)
+				get_estat64(&hw_stats->member)
 
 static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp)
 {
@@ -9065,7 +9081,8 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct tg3 *tp = netdev_priv(dev);
 
-	if (tp->tg3_flags & TG3_FLAG_WOL_CAP)
+	if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
+	    device_can_wakeup(&tp->pdev->dev))
 		wol->supported = WAKE_MAGIC;
 	else
 		wol->supported = 0;
@@ -9078,18 +9095,22 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct tg3 *tp = netdev_priv(dev);
+	struct device *dp = &tp->pdev->dev;
 
 	if (wol->wolopts & ~WAKE_MAGIC)
 		return -EINVAL;
 	if ((wol->wolopts & WAKE_MAGIC) &&
-	    !(tp->tg3_flags & TG3_FLAG_WOL_CAP))
+	    !((tp->tg3_flags & TG3_FLAG_WOL_CAP) && device_can_wakeup(dp)))
 		return -EINVAL;
 
 	spin_lock_bh(&tp->lock);
-	if (wol->wolopts & WAKE_MAGIC)
+	if (wol->wolopts & WAKE_MAGIC) {
 		tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
-	else
+		device_set_wakeup_enable(dp, true);
+	} else {
 		tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE;
+		device_set_wakeup_enable(dp, false);
+	}
 	spin_unlock_bh(&tp->lock);
 
 	return 0;
@@ -11296,7 +11317,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 		if (val & VCPU_CFGSHDW_ASPM_DBNC)
 			tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
 		if ((val & VCPU_CFGSHDW_WOL_ENABLE) &&
-		    (val & VCPU_CFGSHDW_WOL_MAGPKT))
+		    (val & VCPU_CFGSHDW_WOL_MAGPKT) &&
+		    device_may_wakeup(&tp->pdev->dev))
 			tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
 		return;
 	}
@@ -11426,8 +11448,9 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 		    !(nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL))
 			tp->tg3_flags &= ~TG3_FLAG_WOL_CAP;
 
-		if (tp->tg3_flags & TG3_FLAG_WOL_CAP &&
-		    nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE)
+		if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
+		    (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE) &&
+		    device_may_wakeup(&tp->pdev->dev))
 			tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
 
 		if (cfg2 & (1 << 17))
@@ -12442,6 +12465,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 				       tp->misc_host_ctrl);
 	}
 
+	/* Preserve the APE MAC_MODE bits */
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+		tp->mac_mode = tr32(MAC_MODE) |
+			       MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
+	else
+		tp->mac_mode = TG3_DEF_MAC_MODE;
+
 	/* these are limited to 10/100 only */
 	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&
 	     (grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) ||
@@ -13301,7 +13331,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	tp->pdev = pdev;
 	tp->dev = dev;
 	tp->pm_cap = pm_cap;
-	tp->mac_mode = TG3_DEF_MAC_MODE;
 	tp->rx_mode = TG3_DEF_RX_MODE;
 	tp->tx_mode = TG3_DEF_TX_MODE;
 
@@ -13613,6 +13642,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct tg3 *tp = netdev_priv(dev);
+	pci_power_t target_state;
 	int err;
 
 	/* PCI register 4 needs to be saved whether netif_running() or not.
@@ -13641,7 +13671,9 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
 	tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
 	tg3_full_unlock(tp);
 
-	err = tg3_set_power_state(tp, pci_choose_state(pdev, state));
+	target_state = pdev->pm_cap ? pci_target_state(pdev) : PCI_D3hot;
+
+	err = tg3_set_power_state(tp, target_state);
 	if (err) {
 		int err2;
 
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index df07842172b..f5b8cab8d4b 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -325,6 +325,8 @@
 #define  MAC_MODE_TDE_ENABLE		 0x00200000
 #define  MAC_MODE_RDE_ENABLE		 0x00400000
 #define  MAC_MODE_FHDE_ENABLE		 0x00800000
+#define  MAC_MODE_APE_RX_EN		 0x08000000
+#define  MAC_MODE_APE_TX_EN		 0x10000000
 #define MAC_STATUS			0x00000404
 #define  MAC_STATUS_PCS_SYNCED		 0x00000001
 #define  MAC_STATUS_SIGNAL_DET		 0x00000002
@@ -1889,6 +1891,7 @@
 #define  APE_EVENT_STATUS_EVENT_PENDING	 0x80000000
 
 /* APE convenience enumerations. */
+#define TG3_APE_LOCK_GRC                1
 #define TG3_APE_LOCK_MEM                4
 
 #define TG3_EEPROM_SB_F1R2_MBA_OFF	0x10
@@ -2429,7 +2432,10 @@ struct tg3 {
 	struct tg3_ethtool_stats	estats;
 	struct tg3_ethtool_stats	estats_prev;
 
+	union {
 	unsigned long			phy_crc_errors;
+	unsigned long			last_event_jiffies;
+	};
 
 	u32				rx_offset;
 	u32				tg3_flags;
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 85246ed7cb9..ec871f64676 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -360,8 +360,8 @@ TLan_GetSKB( const struct tlan_list_tag *tag)
 {
 	unsigned long addr;
 
-	addr = tag->buffer[8].address;
-	addr |= (tag->buffer[9].address << 16) << 16;
+	addr = tag->buffer[9].address;
+	addr |= (tag->buffer[8].address << 16) << 16;
 	return (struct sk_buff *) addr;
 }
 
@@ -1984,7 +1984,6 @@ static void TLan_ResetLists( struct net_device *dev )
 	TLanList	*list;
 	dma_addr_t	list_phys;
 	struct sk_buff	*skb;
-	void		*t = NULL;
 
 	priv->txHead = 0;
 	priv->txTail = 0;
@@ -2022,7 +2021,8 @@ static void TLan_ResetLists( struct net_device *dev )
 			}
 
 			skb_reserve( skb, NET_IP_ALIGN );
-			list->buffer[0].address = pci_map_single(priv->pciDev, t,
+			list->buffer[0].address = pci_map_single(priv->pciDev,
+								 skb->data,
 								 TLAN_MAX_FRAME_SIZE,
 								 PCI_DMA_FROMDEVICE);
 			TLan_StoreSKB(list, skb);
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 7766cde0d63..bf621328b60 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -95,20 +95,20 @@ MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
 static int ringspeed[XL_MAX_ADAPTERS] = {0,} ;
 
 module_param_array(ringspeed, int, NULL, 0);
-MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ; 
+MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ;
 
 /* Packet buffer size */
 
 static int pkt_buf_sz[XL_MAX_ADAPTERS] = {0,} ;
  
 module_param_array(pkt_buf_sz, int, NULL, 0) ;
-MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ; 
+MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ;
 /* Message Level */
 
-static int message_level[XL_MAX_ADAPTERS] = {0,} ; 
+static int message_level[XL_MAX_ADAPTERS] = {0,} ;
 
 module_param_array(message_level, int, NULL, 0) ;
-MODULE_PARM_DESC(message_level, "3c359: Level of reported messages \n") ; 
+MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ;
 /* 
  *	This is a real nasty way of doing this, but otherwise you
  *	will be stuck with 1555 lines of hex #'s in the code.
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 47d84cd2809..59d1673f938 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -119,7 +119,6 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
-#include <linux/version.h>
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
diff --git a/drivers/net/tokenring/lanstreamer.h b/drivers/net/tokenring/lanstreamer.h
index e7bb3494afc..13ccee6449c 100644
--- a/drivers/net/tokenring/lanstreamer.h
+++ b/drivers/net/tokenring/lanstreamer.h
@@ -60,8 +60,6 @@
  *
  */
 
-#include <linux/version.h>
-
 /* MAX_INTR - the maximum number of times we can loop
  * inside the interrupt function before returning
  * control to the OS (maximum value is 256)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index e6bbc639c2d..6daea0c9186 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -358,6 +358,66 @@ static unsigned int tun_chr_poll(struct file *file, poll_table * wait)
 	return mask;
 }
 
+/* prepad is the amount to reserve at front.  len is length after that.
+ * linear is a hint as to how much to copy (usually headers). */
+static struct sk_buff *tun_alloc_skb(size_t prepad, size_t len, size_t linear,
+				     gfp_t gfp)
+{
+	struct sk_buff *skb;
+	unsigned int i;
+
+	skb = alloc_skb(prepad + len, gfp|__GFP_NOWARN);
+	if (skb) {
+		skb_reserve(skb, prepad);
+		skb_put(skb, len);
+		return skb;
+	}
+
+	/* Under a page?  Don't bother with paged skb. */
+	if (prepad + len < PAGE_SIZE)
+		return NULL;
+
+	/* Start with a normal skb, and add pages. */
+	skb = alloc_skb(prepad + linear, gfp);
+	if (!skb)
+		return NULL;
+
+	skb_reserve(skb, prepad);
+	skb_put(skb, linear);
+
+	len -= linear;
+
+	for (i = 0; i < MAX_SKB_FRAGS; i++) {
+		skb_frag_t *f = &skb_shinfo(skb)->frags[i];
+
+		f->page = alloc_page(gfp|__GFP_ZERO);
+		if (!f->page)
+			break;
+
+		f->page_offset = 0;
+		f->size = PAGE_SIZE;
+
+		skb->data_len += PAGE_SIZE;
+		skb->len += PAGE_SIZE;
+		skb->truesize += PAGE_SIZE;
+		skb_shinfo(skb)->nr_frags++;
+
+		if (len < PAGE_SIZE) {
+			len = 0;
+			break;
+		}
+		len -= PAGE_SIZE;
+	}
+
+	/* Too large, or alloc fail? */
+	if (unlikely(len)) {
+		kfree_skb(skb);
+		skb = NULL;
+	}
+
+	return skb;
+}
+
 /* Get packet from user space buffer */
 static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv, size_t count)
 {
@@ -391,14 +451,12 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv,
 			return -EINVAL;
 	}
 
-	if (!(skb = alloc_skb(len + align, GFP_KERNEL))) {
+	if (!(skb = tun_alloc_skb(align, len, gso.hdr_len, GFP_KERNEL))) {
 		tun->dev->stats.rx_dropped++;
 		return -ENOMEM;
 	}
 
-	if (align)
-		skb_reserve(skb, align);
-	if (memcpy_fromiovec(skb_put(skb, len), iv, len)) {
+	if (skb_copy_datagram_from_iovec(skb, 0, iv, len)) {
 		tun->dev->stats.rx_dropped++;
 		kfree_skb(skb);
 		return -EFAULT;
@@ -748,6 +806,36 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 	return err;
 }
 
+static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr)
+{
+	struct tun_struct *tun = file->private_data;
+
+	if (!tun)
+		return -EBADFD;
+
+	DBG(KERN_INFO "%s: tun_get_iff\n", tun->dev->name);
+
+	strcpy(ifr->ifr_name, tun->dev->name);
+
+	ifr->ifr_flags = 0;
+
+	if (ifr->ifr_flags & TUN_TUN_DEV)
+		ifr->ifr_flags |= IFF_TUN;
+	else
+		ifr->ifr_flags |= IFF_TAP;
+
+	if (tun->flags & TUN_NO_PI)
+		ifr->ifr_flags |= IFF_NO_PI;
+
+	if (tun->flags & TUN_ONE_QUEUE)
+		ifr->ifr_flags |= IFF_ONE_QUEUE;
+
+	if (tun->flags & TUN_VNET_HDR)
+		ifr->ifr_flags |= IFF_VNET_HDR;
+
+	return 0;
+}
+
 /* This is like a cut-down ethtool ops, except done via tun fd so no
  * privs required. */
 static int set_offload(struct net_device *dev, unsigned long arg)
@@ -833,6 +921,15 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 	DBG(KERN_INFO "%s: tun_chr_ioctl cmd %d\n", tun->dev->name, cmd);
 
 	switch (cmd) {
+	case TUNGETIFF:
+		ret = tun_get_iff(current->nsproxy->net_ns, file, &ifr);
+		if (ret)
+			return ret;
+
+		if (copy_to_user(argp, &ifr, sizeof(ifr)))
+			return -EFAULT;
+		break;
+
 	case TUNSETNOCSUM:
 		/* Disable/Enable checksum */
 		if (arg)
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 8549f1159a3..734ce0977f0 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -128,7 +128,6 @@ static const int multicast_filter_limit = 32;
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <linux/in6.h>
-#include <linux/version.h>
 #include <linux/dma-mapping.h>
 
 #include "typhoon.h"
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 68e198bd538..0973b6e3702 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -154,17 +154,6 @@ config USB_NET_AX8817X
 	  This driver creates an interface named "ethX", where X depends on
 	  what other networking devices you have in use.
 
-config USB_HSO
-	tristate "Option USB High Speed Mobile Devices"
-	depends on USB && RFKILL
-	default n
-	help
-	  Choose this option if you have an Option HSDPA/HSUPA card.
-	  These cards support downlink speeds of 7.2Mbps or greater.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called hso.
-
 config USB_NET_CDCETHER
 	tristate "CDC Ethernet support (smart devices such as cable modems)"
 	depends on USB_USBNET
@@ -337,5 +326,15 @@ config USB_NET_ZAURUS
 	  really need this non-conformant variant of CDC Ethernet (or in
 	  some cases CDC MDLM) protocol, not "g_ether".
 
+config USB_HSO
+	tristate "Option USB High Speed Mobile Devices"
+	depends on USB && RFKILL
+	default n
+	help
+	  Choose this option if you have an Option HSDPA/HSUPA card.
+	  These cards support downlink speeds of 7.2Mbps or greater.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hso.
 
 endmenu
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index f7319d32691..78df2be8a72 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -55,12 +55,28 @@
 
 static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
 {
+	void *buf;
+	int err = -ENOMEM;
+
 	devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length);
-	return usb_control_msg(dev->udev,
-			       usb_rcvctrlpipe(dev->udev, 0),
-			       DM_READ_REGS,
-			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			       0, reg, data, length, USB_CTRL_SET_TIMEOUT);
+
+	buf = kmalloc(length, GFP_KERNEL);
+	if (!buf)
+		goto out;
+
+	err = usb_control_msg(dev->udev,
+			      usb_rcvctrlpipe(dev->udev, 0),
+			      DM_READ_REGS,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, reg, buf, length, USB_CTRL_SET_TIMEOUT);
+	if (err == length)
+		memcpy(data, buf, length);
+	else if (err >= 0)
+		err = -EINVAL;
+	kfree(buf);
+
+ out:
+	return err;
 }
 
 static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
@@ -70,12 +86,28 @@ static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
 
 static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
 {
+	void *buf = NULL;
+	int err = -ENOMEM;
+
 	devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length);
-	return usb_control_msg(dev->udev,
-			       usb_sndctrlpipe(dev->udev, 0),
-			       DM_WRITE_REGS,
-			       USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
-			       0, reg, data, length, USB_CTRL_SET_TIMEOUT);
+
+	if (data) {
+		buf = kmalloc(length, GFP_KERNEL);
+		if (!buf)
+			goto out;
+		memcpy(buf, data, length);
+	}
+
+	err = usb_control_msg(dev->udev,
+			      usb_sndctrlpipe(dev->udev, 0),
+			      DM_WRITE_REGS,
+			      USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
+			      0, reg, buf, length, USB_CTRL_SET_TIMEOUT);
+	kfree(buf);
+	if (err >= 0 && err < length)
+		err = -EINVAL;
+ out:
+	return err;
 }
 
 static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 031d07b105a..6e42b5a8c22 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -102,8 +102,12 @@
 
 #define MAX_RX_URBS			2
 
-#define get_serial_by_tty(x)	\
-	(x ? (struct hso_serial *)x->driver_data : NULL)
+static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty)
+{
+	if (tty)
+		return tty->driver_data;
+	return NULL;
+}
 
 /*****************************************************************************/
 /* Debugging functions                                                       */
@@ -294,24 +298,25 @@ static int hso_get_activity(struct hso_device *hso_dev);
 
 /* #define DEBUG */
 
-#define dev2net(x) (x->port_data.dev_net)
-#define dev2ser(x) (x->port_data.dev_serial)
+static inline struct hso_net *dev2net(struct hso_device *hso_dev)
+{
+	return hso_dev->port_data.dev_net;
+}
+
+static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
+{
+	return hso_dev->port_data.dev_serial;
+}
 
 /* Debugging functions */
 #ifdef DEBUG
 static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
 		     unsigned int len)
 {
-	u8 i = 0;
+	static char name[255];
 
-	printk(KERN_DEBUG "[%d:%s]: len %d", line_count, func_name, len);
-
-	for (i = 0; i < len; i++) {
-		if (!(i % 16))
-			printk("\n    0x%03x:  ", i);
-		printk("%02x ", (unsigned char)buf[i]);
-	}
-	printk("\n");
+	sprintf(name, "hso[%d:%s]", line_count, func_name);
+	print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
 }
 
 #define DUMP(buf_, len_)	\
@@ -392,7 +397,7 @@ static const struct usb_device_id hso_ids[] = {
 	{default_port_device(0x0af0, 0xc031)},	/* Icon-Edge */
 	{icon321_port_device(0x0af0, 0xd013)},	/* Module HSxPA */
 	{icon321_port_device(0x0af0, 0xd031)},	/* Icon-321 */
-	{default_port_device(0x0af0, 0xd033)},	/* Icon-322 */
+	{icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */
 	{USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */
 	{USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */
 	{USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */
@@ -528,13 +533,12 @@ static struct hso_serial *get_serial_by_shared_int_and_type(
 
 static struct hso_serial *get_serial_by_index(unsigned index)
 {
-	struct hso_serial *serial;
+	struct hso_serial *serial = NULL;
 	unsigned long flags;
 
-	if (!serial_table[index])
-		return NULL;
 	spin_lock_irqsave(&serial_table_lock, flags);
-	serial = dev2ser(serial_table[index]);
+	if (serial_table[index])
+		serial = dev2ser(serial_table[index]);
 	spin_unlock_irqrestore(&serial_table_lock, flags);
 
 	return serial;
@@ -561,6 +565,7 @@ static int get_free_serial_index(void)
 static void set_serial_by_index(unsigned index, struct hso_serial *serial)
 {
 	unsigned long flags;
+
 	spin_lock_irqsave(&serial_table_lock, flags);
 	if (serial)
 		serial_table[index] = serial->parent;
@@ -569,7 +574,7 @@ static void set_serial_by_index(unsigned index, struct hso_serial *serial)
 	spin_unlock_irqrestore(&serial_table_lock, flags);
 }
 
-/* log a meaningfull explanation of an USB status */
+/* log a meaningful explanation of an USB status */
 static void log_usb_status(int status, const char *function)
 {
 	char *explanation;
@@ -1103,8 +1108,8 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
 	/* reset the rts and dtr */
 	/* do the actual close */
 	serial->open_count--;
+	kref_put(&serial->parent->ref, hso_serial_ref_free);
 	if (serial->open_count <= 0) {
-		kref_put(&serial->parent->ref, hso_serial_ref_free);
 		serial->open_count = 0;
 		if (serial->tty) {
 			serial->tty->driver_data = NULL;
@@ -1467,7 +1472,8 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb)
 		return;
 	}
 	hso_put_activity(serial->parent);
-	tty_wakeup(serial->tty);
+	if (serial->tty)
+		tty_wakeup(serial->tty);
 	hso_kick_transmit(serial);
 
 	D1(" ");
@@ -1538,7 +1544,8 @@ static void ctrl_callback(struct urb *urb)
 			clear_bit(HSO_SERIAL_FLAG_RX_SENT, &serial->flags);
 	} else {
 		hso_put_activity(serial->parent);
-		tty_wakeup(serial->tty);
+		if (serial->tty)
+			tty_wakeup(serial->tty);
 		/* response to a write command */
 		hso_kick_transmit(serial);
 	}
@@ -2606,6 +2613,7 @@ static int hso_resume(struct usb_interface *iface)
 					"Transmitting lingering data\n");
 				hso_net_start_xmit(hso_net->skb_tx_buf,
 						   hso_net->net);
+				hso_net->skb_tx_buf = NULL;
 			}
 			result = hso_start_net_device(network_table[i]);
 			if (result)
@@ -2652,7 +2660,7 @@ static void hso_free_interface(struct usb_interface *interface)
 			hso_stop_net_device(network_table[i]);
 			cancel_work_sync(&network_table[i]->async_put_intf);
 			cancel_work_sync(&network_table[i]->async_get_intf);
-			if(rfk)
+			if (rfk)
 				rfkill_unregister(rfk);
 			hso_free_net_device(network_table[i]);
 		}
@@ -2723,7 +2731,7 @@ static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
 }
 
 /* operations setup of the serial interface */
-static struct tty_operations hso_serial_ops = {
+static const struct tty_operations hso_serial_ops = {
 	.open = hso_serial_open,
 	.close = hso_serial_close,
 	.write = hso_serial_write,
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index c3d119f997f..ca9d00c1194 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -46,6 +46,10 @@
 
 #define MCS7830_VENDOR_ID	0x9710
 #define MCS7830_PRODUCT_ID	0x7830
+#define MCS7730_PRODUCT_ID	0x7730
+
+#define SITECOM_VENDOR_ID	0x0DF6
+#define LN_030_PRODUCT_ID	0x0021
 
 #define MCS7830_MII_ADVERTISE	(ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
 				 ADVERTISE_100HALF | ADVERTISE_10FULL | \
@@ -442,6 +446,29 @@ static struct ethtool_ops mcs7830_ethtool_ops = {
 	.nway_reset		= usbnet_nway_reset,
 };
 
+static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
+{
+	int ret;
+	struct usbnet *dev = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+	ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN,
+			netdev->dev_addr);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
 {
 	struct net_device *net = dev->net;
@@ -455,6 +482,7 @@ static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
 	net->ethtool_ops = &mcs7830_ethtool_ops;
 	net->set_multicast_list = mcs7830_set_multicast;
 	mcs7830_set_multicast(net);
+	net->set_mac_address = mcs7830_set_mac_address;
 
 	/* reserve space for the status byte on rx */
 	dev->rx_urb_size = ETH_FRAME_LEN + 1;
@@ -491,7 +519,16 @@ static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 }
 
 static const struct driver_info moschip_info = {
-	.description	= "MOSCHIP 7830 usb-NET adapter",
+	.description	= "MOSCHIP 7830/7730 usb-NET adapter",
+	.bind		= mcs7830_bind,
+	.rx_fixup	= mcs7830_rx_fixup,
+	.flags		= FLAG_ETHER,
+	.in		= 1,
+	.out		= 2,
+};
+
+static const struct driver_info sitecom_info = {
+	.description    = "Sitecom LN-30 usb-NET adapter",
 	.bind		= mcs7830_bind,
 	.rx_fixup	= mcs7830_rx_fixup,
 	.flags		= FLAG_ETHER,
@@ -504,6 +541,14 @@ static const struct usb_device_id products[] = {
 		USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
 		.driver_info = (unsigned long) &moschip_info,
 	},
+	{
+		USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID),
+		.driver_info = (unsigned long) &moschip_info,
+	},
+	{
+		USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID),
+		.driver_info = (unsigned long) &sitecom_info,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(usb, products);
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index b588c890ea7..8c19307e504 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -117,7 +117,7 @@ static void ctrl_callback(struct urb *urb)
 	case -ENOENT:
 		break;
 	default:
-		if (netif_msg_drv(pegasus))
+		if (netif_msg_drv(pegasus) && printk_ratelimit())
 			dev_dbg(&pegasus->intf->dev, "%s, status %d\n",
 				__FUNCTION__, urb->status);
 	}
@@ -166,7 +166,7 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
 		set_current_state(TASK_RUNNING);
 		if (ret == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
+		if (netif_msg_drv(pegasus) && printk_ratelimit())
 			dev_err(&pegasus->intf->dev, "%s, status %d\n",
 					__FUNCTION__, ret);
 		goto out;
@@ -275,7 +275,7 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
 	if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
 		if (ret == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
+		if (netif_msg_drv(pegasus) && printk_ratelimit())
 			dev_err(&pegasus->intf->dev, "%s, status %d\n",
 					__FUNCTION__, ret);
 		goto out;
@@ -1209,8 +1209,7 @@ static void pegasus_set_multicast(struct net_device *net)
 		pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
 		if (netif_msg_link(pegasus))
 			pr_info("%s: Promiscuous mode enabled.\n", net->name);
-	} else if (net->mc_count ||
-		   (net->flags & IFF_ALLMULTI)) {
+	} else if (net->mc_count || (net->flags & IFF_ALLMULTI)) {
 		pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
 		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
 		if (netif_msg_link(pegasus))
@@ -1220,6 +1219,8 @@ static void pegasus_set_multicast(struct net_device *net)
 		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
 	}
 
+	pegasus->ctrl_urb->status = 0;
+
 	pegasus->flags |= ETH_REGS_CHANGE;
 	ctrl_callback(pegasus->ctrl_urb);
 }
@@ -1285,6 +1286,21 @@ static void check_carrier(struct work_struct *work)
 	}
 }
 
+static int pegasus_blacklisted(struct usb_device *udev)
+{
+	struct usb_device_descriptor *udd = &udev->descriptor;
+
+	/* Special quirk to keep the driver from handling the Belkin Bluetooth
+	 * dongle which happens to have the same ID.
+	 */
+	if ((udd->idVendor == VENDOR_BELKIN && udd->idProduct == 0x0121) &&
+	    (udd->bDeviceClass == USB_CLASS_WIRELESS_CONTROLLER) &&
+	    (udd->bDeviceProtocol == 1))
+		return 1;
+
+	return 0;
+}
+
 static int pegasus_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
 {
@@ -1296,6 +1312,12 @@ static int pegasus_probe(struct usb_interface *intf,
 	DECLARE_MAC_BUF(mac);
 
 	usb_get_dev(dev);
+
+	if (pegasus_blacklisted(dev)) {
+		res = -ENODEV;
+		goto out;
+	}
+
 	net = alloc_etherdev(sizeof(struct pegasus));
 	if (!net) {
 		dev_err(&intf->dev, "can't allocate %s\n", "device");
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 370ce30f2f4..007c1297006 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -662,6 +662,10 @@ static void velocity_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid
         spin_unlock_irq(&vptr->lock);
 }
 
+static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
+{
+	vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0;
+}
 
 /**
  *	velocity_rx_reset	-	handle a receive reset
@@ -677,16 +681,16 @@ static void velocity_rx_reset(struct velocity_info *vptr)
 	struct mac_regs __iomem * regs = vptr->mac_regs;
 	int i;
 
-	vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0;
+	velocity_init_rx_ring_indexes(vptr);
 
 	/*
 	 *	Init state, all RD entries belong to the NIC
 	 */
 	for (i = 0; i < vptr->options.numrx; ++i)
-		vptr->rd_ring[i].rdesc0.len |= OWNED_BY_NIC;
+		vptr->rx.ring[i].rdesc0.len |= OWNED_BY_NIC;
 
 	writew(vptr->options.numrx, &regs->RBRDU);
-	writel(vptr->rd_pool_dma, &regs->RDBaseLo);
+	writel(vptr->rx.pool_dma, &regs->RDBaseLo);
 	writew(0, &regs->RDIdx);
 	writew(vptr->options.numrx - 1, &regs->RDCSize);
 }
@@ -779,15 +783,15 @@ static void velocity_init_registers(struct velocity_info *vptr,
 
 		vptr->int_mask = INT_MASK_DEF;
 
-		writel(vptr->rd_pool_dma, &regs->RDBaseLo);
+		writel(vptr->rx.pool_dma, &regs->RDBaseLo);
 		writew(vptr->options.numrx - 1, &regs->RDCSize);
 		mac_rx_queue_run(regs);
 		mac_rx_queue_wake(regs);
 
 		writew(vptr->options.numtx - 1, &regs->TDCSize);
 
-		for (i = 0; i < vptr->num_txq; i++) {
-			writel(vptr->td_pool_dma[i], &regs->TDBaseLo[i]);
+		for (i = 0; i < vptr->tx.numq; i++) {
+			writel(vptr->tx.pool_dma[i], &regs->TDBaseLo[i]);
 			mac_tx_queue_run(regs, i);
 		}
 
@@ -1047,7 +1051,7 @@ static void __devinit velocity_init_info(struct pci_dev *pdev,
 
 	vptr->pdev = pdev;
 	vptr->chip_id = info->chip_id;
-	vptr->num_txq = info->txqueue;
+	vptr->tx.numq = info->txqueue;
 	vptr->multicast_limit = MCAM_SIZE;
 	spin_lock_init(&vptr->lock);
 	INIT_LIST_HEAD(&vptr->list);
@@ -1093,14 +1097,14 @@ static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pc
 }
 
 /**
- *	velocity_init_rings	-	set up DMA rings
+ *	velocity_init_dma_rings	-	set up DMA rings
  *	@vptr: Velocity to set up
  *
  *	Allocate PCI mapped DMA rings for the receive and transmit layer
  *	to use.
  */
 
-static int velocity_init_rings(struct velocity_info *vptr)
+static int velocity_init_dma_rings(struct velocity_info *vptr)
 {
 	struct velocity_opt *opt = &vptr->options;
 	const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc);
@@ -1116,7 +1120,7 @@ static int velocity_init_rings(struct velocity_info *vptr)
 	 * pci_alloc_consistent() fulfills the requirement for 64 bytes
 	 * alignment
 	 */
-	pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->num_txq +
+	pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->tx.numq +
 				    rx_ring_size, &pool_dma);
 	if (!pool) {
 		dev_err(&pdev->dev, "%s : DMA memory allocation failed.\n",
@@ -1124,15 +1128,15 @@ static int velocity_init_rings(struct velocity_info *vptr)
 		return -ENOMEM;
 	}
 
-	vptr->rd_ring = pool;
-	vptr->rd_pool_dma = pool_dma;
+	vptr->rx.ring = pool;
+	vptr->rx.pool_dma = pool_dma;
 
 	pool += rx_ring_size;
 	pool_dma += rx_ring_size;
 
-	for (i = 0; i < vptr->num_txq; i++) {
-		vptr->td_rings[i] = pool;
-		vptr->td_pool_dma[i] = pool_dma;
+	for (i = 0; i < vptr->tx.numq; i++) {
+		vptr->tx.rings[i] = pool;
+		vptr->tx.pool_dma[i] = pool_dma;
 		pool += tx_ring_size;
 		pool_dma += tx_ring_size;
 	}
@@ -1141,18 +1145,18 @@ static int velocity_init_rings(struct velocity_info *vptr)
 }
 
 /**
- *	velocity_free_rings	-	free PCI ring pointers
+ *	velocity_free_dma_rings	-	free PCI ring pointers
  *	@vptr: Velocity to free from
  *
  *	Clean up the PCI ring buffers allocated to this velocity.
  */
 
-static void velocity_free_rings(struct velocity_info *vptr)
+static void velocity_free_dma_rings(struct velocity_info *vptr)
 {
 	const int size = vptr->options.numrx * sizeof(struct rx_desc) +
-		vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq;
+		vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
 
-	pci_free_consistent(vptr->pdev, size, vptr->rd_ring, vptr->rd_pool_dma);
+	pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
 }
 
 static void velocity_give_many_rx_descs(struct velocity_info *vptr)
@@ -1164,44 +1168,44 @@ static void velocity_give_many_rx_descs(struct velocity_info *vptr)
 	 * RD number must be equal to 4X per hardware spec
 	 * (programming guide rev 1.20, p.13)
 	 */
-	if (vptr->rd_filled < 4)
+	if (vptr->rx.filled < 4)
 		return;
 
 	wmb();
 
-	unusable = vptr->rd_filled & 0x0003;
-	dirty = vptr->rd_dirty - unusable;
-	for (avail = vptr->rd_filled & 0xfffc; avail; avail--) {
+	unusable = vptr->rx.filled & 0x0003;
+	dirty = vptr->rx.dirty - unusable;
+	for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
 		dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
-		vptr->rd_ring[dirty].rdesc0.len |= OWNED_BY_NIC;
+		vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
 	}
 
-	writew(vptr->rd_filled & 0xfffc, &regs->RBRDU);
-	vptr->rd_filled = unusable;
+	writew(vptr->rx.filled & 0xfffc, &regs->RBRDU);
+	vptr->rx.filled = unusable;
 }
 
 static int velocity_rx_refill(struct velocity_info *vptr)
 {
-	int dirty = vptr->rd_dirty, done = 0;
+	int dirty = vptr->rx.dirty, done = 0;
 
 	do {
-		struct rx_desc *rd = vptr->rd_ring + dirty;
+		struct rx_desc *rd = vptr->rx.ring + dirty;
 
 		/* Fine for an all zero Rx desc at init time as well */
 		if (rd->rdesc0.len & OWNED_BY_NIC)
 			break;
 
-		if (!vptr->rd_info[dirty].skb) {
+		if (!vptr->rx.info[dirty].skb) {
 			if (velocity_alloc_rx_buf(vptr, dirty) < 0)
 				break;
 		}
 		done++;
 		dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0;
-	} while (dirty != vptr->rd_curr);
+	} while (dirty != vptr->rx.curr);
 
 	if (done) {
-		vptr->rd_dirty = dirty;
-		vptr->rd_filled += done;
+		vptr->rx.dirty = dirty;
+		vptr->rx.filled += done;
 	}
 
 	return done;
@@ -1209,7 +1213,7 @@ static int velocity_rx_refill(struct velocity_info *vptr)
 
 static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
 {
-	vptr->rx_buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
+	vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
 }
 
 /**
@@ -1224,12 +1228,12 @@ static int velocity_init_rd_ring(struct velocity_info *vptr)
 {
 	int ret = -ENOMEM;
 
-	vptr->rd_info = kcalloc(vptr->options.numrx,
+	vptr->rx.info = kcalloc(vptr->options.numrx,
 				sizeof(struct velocity_rd_info), GFP_KERNEL);
-	if (!vptr->rd_info)
+	if (!vptr->rx.info)
 		goto out;
 
-	vptr->rd_filled = vptr->rd_dirty = vptr->rd_curr = 0;
+	velocity_init_rx_ring_indexes(vptr);
 
 	if (velocity_rx_refill(vptr) != vptr->options.numrx) {
 		VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
@@ -1255,18 +1259,18 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
 {
 	int i;
 
-	if (vptr->rd_info == NULL)
+	if (vptr->rx.info == NULL)
 		return;
 
 	for (i = 0; i < vptr->options.numrx; i++) {
-		struct velocity_rd_info *rd_info = &(vptr->rd_info[i]);
-		struct rx_desc *rd = vptr->rd_ring + i;
+		struct velocity_rd_info *rd_info = &(vptr->rx.info[i]);
+		struct rx_desc *rd = vptr->rx.ring + i;
 
 		memset(rd, 0, sizeof(*rd));
 
 		if (!rd_info->skb)
 			continue;
-		pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz,
+		pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
 				 PCI_DMA_FROMDEVICE);
 		rd_info->skb_dma = (dma_addr_t) NULL;
 
@@ -1274,8 +1278,8 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
 		rd_info->skb = NULL;
 	}
 
-	kfree(vptr->rd_info);
-	vptr->rd_info = NULL;
+	kfree(vptr->rx.info);
+	vptr->rx.info = NULL;
 }
 
 /**
@@ -1293,19 +1297,19 @@ static int velocity_init_td_ring(struct velocity_info *vptr)
 	unsigned int j;
 
 	/* Init the TD ring entries */
-	for (j = 0; j < vptr->num_txq; j++) {
-		curr = vptr->td_pool_dma[j];
+	for (j = 0; j < vptr->tx.numq; j++) {
+		curr = vptr->tx.pool_dma[j];
 
-		vptr->td_infos[j] = kcalloc(vptr->options.numtx,
+		vptr->tx.infos[j] = kcalloc(vptr->options.numtx,
 					    sizeof(struct velocity_td_info),
 					    GFP_KERNEL);
-		if (!vptr->td_infos[j])	{
+		if (!vptr->tx.infos[j])	{
 			while(--j >= 0)
-				kfree(vptr->td_infos[j]);
+				kfree(vptr->tx.infos[j]);
 			return -ENOMEM;
 		}
 
-		vptr->td_tail[j] = vptr->td_curr[j] = vptr->td_used[j] = 0;
+		vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0;
 	}
 	return 0;
 }
@@ -1317,7 +1321,7 @@ static int velocity_init_td_ring(struct velocity_info *vptr)
 static void velocity_free_td_ring_entry(struct velocity_info *vptr,
 							 int q, int n)
 {
-	struct velocity_td_info * td_info = &(vptr->td_infos[q][n]);
+	struct velocity_td_info * td_info = &(vptr->tx.infos[q][n]);
 	int i;
 
 	if (td_info == NULL)
@@ -1349,15 +1353,15 @@ static void velocity_free_td_ring(struct velocity_info *vptr)
 {
 	int i, j;
 
-	for (j = 0; j < vptr->num_txq; j++) {
-		if (vptr->td_infos[j] == NULL)
+	for (j = 0; j < vptr->tx.numq; j++) {
+		if (vptr->tx.infos[j] == NULL)
 			continue;
 		for (i = 0; i < vptr->options.numtx; i++) {
 			velocity_free_td_ring_entry(vptr, j, i);
 
 		}
-		kfree(vptr->td_infos[j]);
-		vptr->td_infos[j] = NULL;
+		kfree(vptr->tx.infos[j]);
+		vptr->tx.infos[j] = NULL;
 	}
 }
 
@@ -1374,13 +1378,13 @@ static void velocity_free_td_ring(struct velocity_info *vptr)
 static int velocity_rx_srv(struct velocity_info *vptr, int status)
 {
 	struct net_device_stats *stats = &vptr->stats;
-	int rd_curr = vptr->rd_curr;
+	int rd_curr = vptr->rx.curr;
 	int works = 0;
 
 	do {
-		struct rx_desc *rd = vptr->rd_ring + rd_curr;
+		struct rx_desc *rd = vptr->rx.ring + rd_curr;
 
-		if (!vptr->rd_info[rd_curr].skb)
+		if (!vptr->rx.info[rd_curr].skb)
 			break;
 
 		if (rd->rdesc0.len & OWNED_BY_NIC)
@@ -1412,7 +1416,7 @@ static int velocity_rx_srv(struct velocity_info *vptr, int status)
 			rd_curr = 0;
 	} while (++works <= 15);
 
-	vptr->rd_curr = rd_curr;
+	vptr->rx.curr = rd_curr;
 
 	if ((works > 0) && (velocity_rx_refill(vptr) > 0))
 		velocity_give_many_rx_descs(vptr);
@@ -1510,8 +1514,8 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 {
 	void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
 	struct net_device_stats *stats = &vptr->stats;
-	struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
-	struct rx_desc *rd = &(vptr->rd_ring[idx]);
+	struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+	struct rx_desc *rd = &(vptr->rx.ring[idx]);
 	int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
 	struct sk_buff *skb;
 
@@ -1527,7 +1531,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 	skb = rd_info->skb;
 
 	pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma,
-				    vptr->rx_buf_sz, PCI_DMA_FROMDEVICE);
+				    vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
 
 	/*
 	 *	Drop frame not meeting IEEE 802.3
@@ -1550,7 +1554,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 		rd_info->skb = NULL;
 	}
 
-	pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz,
+	pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
 		   PCI_DMA_FROMDEVICE);
 
 	skb_put(skb, pkt_len - 4);
@@ -1580,10 +1584,10 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 
 static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
 {
-	struct rx_desc *rd = &(vptr->rd_ring[idx]);
-	struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
+	struct rx_desc *rd = &(vptr->rx.ring[idx]);
+	struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
 
-	rd_info->skb = netdev_alloc_skb(vptr->dev, vptr->rx_buf_sz + 64);
+	rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64);
 	if (rd_info->skb == NULL)
 		return -ENOMEM;
 
@@ -1592,14 +1596,15 @@ static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
 	 *	64byte alignment.
 	 */
 	skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63);
-	rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data, vptr->rx_buf_sz, PCI_DMA_FROMDEVICE);
+	rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data,
+					vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
 
 	/*
 	 *	Fill in the descriptor to match
- 	 */
+	 */
 
 	*((u32 *) & (rd->rdesc0)) = 0;
-	rd->size = cpu_to_le16(vptr->rx_buf_sz) | RX_INTEN;
+	rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
 	rd->pa_low = cpu_to_le32(rd_info->skb_dma);
 	rd->pa_high = 0;
 	return 0;
@@ -1625,15 +1630,15 @@ static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
 	struct velocity_td_info *tdinfo;
 	struct net_device_stats *stats = &vptr->stats;
 
-	for (qnum = 0; qnum < vptr->num_txq; qnum++) {
-		for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0;
+	for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
+		for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
 			idx = (idx + 1) % vptr->options.numtx) {
 
 			/*
 			 *	Get Tx Descriptor
 			 */
-			td = &(vptr->td_rings[qnum][idx]);
-			tdinfo = &(vptr->td_infos[qnum][idx]);
+			td = &(vptr->tx.rings[qnum][idx]);
+			tdinfo = &(vptr->tx.infos[qnum][idx]);
 
 			if (td->tdesc0.len & OWNED_BY_NIC)
 				break;
@@ -1657,9 +1662,9 @@ static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
 				stats->tx_bytes += tdinfo->skb->len;
 			}
 			velocity_free_tx_buf(vptr, tdinfo);
-			vptr->td_used[qnum]--;
+			vptr->tx.used[qnum]--;
 		}
-		vptr->td_tail[qnum] = idx;
+		vptr->tx.tail[qnum] = idx;
 
 		if (AVAIL_TD(vptr, qnum) < 1) {
 			full = 1;
@@ -1846,6 +1851,40 @@ static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_
 	tdinfo->skb = NULL;
 }
 
+static int velocity_init_rings(struct velocity_info *vptr, int mtu)
+{
+	int ret;
+
+	velocity_set_rxbufsize(vptr, mtu);
+
+	ret = velocity_init_dma_rings(vptr);
+	if (ret < 0)
+		goto out;
+
+	ret = velocity_init_rd_ring(vptr);
+	if (ret < 0)
+		goto err_free_dma_rings_0;
+
+	ret = velocity_init_td_ring(vptr);
+	if (ret < 0)
+		goto err_free_rd_ring_1;
+out:
+	return ret;
+
+err_free_rd_ring_1:
+	velocity_free_rd_ring(vptr);
+err_free_dma_rings_0:
+	velocity_free_dma_rings(vptr);
+	goto out;
+}
+
+static void velocity_free_rings(struct velocity_info *vptr)
+{
+	velocity_free_td_ring(vptr);
+	velocity_free_rd_ring(vptr);
+	velocity_free_dma_rings(vptr);
+}
+
 /**
  *	velocity_open		-	interface activation callback
  *	@dev: network layer device to open
@@ -1862,20 +1901,10 @@ static int velocity_open(struct net_device *dev)
 	struct velocity_info *vptr = netdev_priv(dev);
 	int ret;
 
-	velocity_set_rxbufsize(vptr, dev->mtu);
-
-	ret = velocity_init_rings(vptr);
+	ret = velocity_init_rings(vptr, dev->mtu);
 	if (ret < 0)
 		goto out;
 
-	ret = velocity_init_rd_ring(vptr);
-	if (ret < 0)
-		goto err_free_desc_rings;
-
-	ret = velocity_init_td_ring(vptr);
-	if (ret < 0)
-		goto err_free_rd_ring;
-
 	/* Ensure chip is running */
 	pci_set_power_state(vptr->pdev, PCI_D0);
 
@@ -1888,7 +1917,8 @@ static int velocity_open(struct net_device *dev)
 	if (ret < 0) {
 		/* Power down the chip */
 		pci_set_power_state(vptr->pdev, PCI_D3hot);
-		goto err_free_td_ring;
+		velocity_free_rings(vptr);
+		goto out;
 	}
 
 	mac_enable_int(vptr->mac_regs);
@@ -1896,14 +1926,6 @@ static int velocity_open(struct net_device *dev)
 	vptr->flags |= VELOCITY_FLAGS_OPENED;
 out:
 	return ret;
-
-err_free_td_ring:
-	velocity_free_td_ring(vptr);
-err_free_rd_ring:
-	velocity_free_rd_ring(vptr);
-err_free_desc_rings:
-	velocity_free_rings(vptr);
-	goto out;
 }
 
 /**
@@ -1919,50 +1941,72 @@ err_free_desc_rings:
 static int velocity_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct velocity_info *vptr = netdev_priv(dev);
-	unsigned long flags;
-	int oldmtu = dev->mtu;
 	int ret = 0;
 
 	if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) {
 		VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n",
 				vptr->dev->name);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_0;
 	}
 
 	if (!netif_running(dev)) {
 		dev->mtu = new_mtu;
-		return 0;
+		goto out_0;
 	}
 
-	if (new_mtu != oldmtu) {
+	if (dev->mtu != new_mtu) {
+		struct velocity_info *tmp_vptr;
+		unsigned long flags;
+		struct rx_info rx;
+		struct tx_info tx;
+
+		tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL);
+		if (!tmp_vptr) {
+			ret = -ENOMEM;
+			goto out_0;
+		}
+
+		tmp_vptr->dev = dev;
+		tmp_vptr->pdev = vptr->pdev;
+		tmp_vptr->options = vptr->options;
+		tmp_vptr->tx.numq = vptr->tx.numq;
+
+		ret = velocity_init_rings(tmp_vptr, new_mtu);
+		if (ret < 0)
+			goto out_free_tmp_vptr_1;
+
 		spin_lock_irqsave(&vptr->lock, flags);
 
 		netif_stop_queue(dev);
 		velocity_shutdown(vptr);
 
-		velocity_free_td_ring(vptr);
-		velocity_free_rd_ring(vptr);
+		rx = vptr->rx;
+		tx = vptr->tx;
 
-		dev->mtu = new_mtu;
+		vptr->rx = tmp_vptr->rx;
+		vptr->tx = tmp_vptr->tx;
 
-		velocity_set_rxbufsize(vptr, new_mtu);
+		tmp_vptr->rx = rx;
+		tmp_vptr->tx = tx;
 
-		ret = velocity_init_rd_ring(vptr);
-		if (ret < 0)
-			goto out_unlock;
+		dev->mtu = new_mtu;
 
-		ret = velocity_init_td_ring(vptr);
-		if (ret < 0)
-			goto out_unlock;
+		velocity_give_many_rx_descs(vptr);
 
 		velocity_init_registers(vptr, VELOCITY_INIT_COLD);
 
 		mac_enable_int(vptr->mac_regs);
 		netif_start_queue(dev);
-out_unlock:
+
 		spin_unlock_irqrestore(&vptr->lock, flags);
-	}
 
+		velocity_free_rings(tmp_vptr);
+
+out_free_tmp_vptr_1:
+		kfree(tmp_vptr);
+	}
+out_0:
 	return ret;
 }
 
@@ -2008,9 +2052,6 @@ static int velocity_close(struct net_device *dev)
 	/* Power down the chip */
 	pci_set_power_state(vptr->pdev, PCI_D3hot);
 
-	/* Free the resources */
-	velocity_free_td_ring(vptr);
-	velocity_free_rd_ring(vptr);
 	velocity_free_rings(vptr);
 
 	vptr->flags &= (~VELOCITY_FLAGS_OPENED);
@@ -2056,9 +2097,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	spin_lock_irqsave(&vptr->lock, flags);
 
-	index = vptr->td_curr[qnum];
-	td_ptr = &(vptr->td_rings[qnum][index]);
-	tdinfo = &(vptr->td_infos[qnum][index]);
+	index = vptr->tx.curr[qnum];
+	td_ptr = &(vptr->tx.rings[qnum][index]);
+	tdinfo = &(vptr->tx.infos[qnum][index]);
 
 	td_ptr->tdesc1.TCR = TCR0_TIC;
 	td_ptr->td_buf[0].size &= ~TD_QUEUE;
@@ -2071,9 +2112,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 			skb_copy_from_linear_data(skb, tdinfo->buf, skb->len);
 			tdinfo->skb_dma[0] = tdinfo->buf_dma;
 			td_ptr->tdesc0.len = len;
-			td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-			td_ptr->td_buf[0].pa_high = 0;
-			td_ptr->td_buf[0].size = len;	/* queue is 0 anyway */
+			td_ptr->tx.buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+			td_ptr->tx.buf[0].pa_high = 0;
+			td_ptr->tx.buf[0].size = len;	/* queue is 0 anyway */
 			tdinfo->nskb_dma = 1;
 		} else {
 			int i = 0;
@@ -2084,9 +2125,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 			td_ptr->tdesc0.len = len;
 
 			/* FIXME: support 48bit DMA later */
-			td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
-			td_ptr->td_buf[i].pa_high = 0;
-			td_ptr->td_buf[i].size = cpu_to_le16(skb_headlen(skb));
+			td_ptr->tx.buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
+			td_ptr->tx.buf[i].pa_high = 0;
+			td_ptr->tx.buf[i].size = cpu_to_le16(skb_headlen(skb));
 
 			for (i = 0; i < nfrags; i++) {
 				skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
@@ -2094,9 +2135,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 
 				tdinfo->skb_dma[i + 1] = pci_map_single(vptr->pdev, addr, frag->size, PCI_DMA_TODEVICE);
 
-				td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
-				td_ptr->td_buf[i + 1].pa_high = 0;
-				td_ptr->td_buf[i + 1].size = cpu_to_le16(frag->size);
+				td_ptr->tx.buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
+				td_ptr->tx.buf[i + 1].pa_high = 0;
+				td_ptr->tx.buf[i + 1].size = cpu_to_le16(frag->size);
 			}
 			tdinfo->nskb_dma = i - 1;
 		}
@@ -2142,13 +2183,13 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (prev < 0)
 			prev = vptr->options.numtx - 1;
 		td_ptr->tdesc0.len |= OWNED_BY_NIC;
-		vptr->td_used[qnum]++;
-		vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx;
+		vptr->tx.used[qnum]++;
+		vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
 
 		if (AVAIL_TD(vptr, qnum) < 1)
 			netif_stop_queue(dev);
 
-		td_ptr = &(vptr->td_rings[qnum][prev]);
+		td_ptr = &(vptr->tx.rings[qnum][prev]);
 		td_ptr->td_buf[0].size |= TD_QUEUE;
 		mac_tx_queue_wake(vptr->mac_regs, qnum);
 	}
@@ -3405,8 +3446,8 @@ static int velocity_resume(struct pci_dev *pdev)
 
 	velocity_tx_srv(vptr, 0);
 
-	for (i = 0; i < vptr->num_txq; i++) {
-		if (vptr->td_used[i]) {
+	for (i = 0; i < vptr->tx.numq; i++) {
+		if (vptr->tx.used[i]) {
 			mac_tx_queue_wake(vptr->mac_regs, i);
 		}
 	}
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index 86446147284..1b95b04c925 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1494,6 +1494,10 @@ struct velocity_opt {
 	u32 flags;
 };
 
+#define AVAIL_TD(p,q)   ((p)->options.numtx-((p)->tx.used[(q)]))
+
+#define GET_RD_BY_IDX(vptr, idx)   (vptr->rd_ring[idx])
+
 struct velocity_info {
 	struct list_head list;
 
@@ -1501,9 +1505,6 @@ struct velocity_info {
 	struct net_device *dev;
 	struct net_device_stats stats;
 
-	dma_addr_t rd_pool_dma;
-	dma_addr_t td_pool_dma[TX_QUEUE_NO];
-
 	struct vlan_group    *vlgrp;
 	u8 ip_addr[4];
 	enum chip_type chip_id;
@@ -1512,25 +1513,29 @@ struct velocity_info {
 	unsigned long memaddr;
 	unsigned long ioaddr;
 
-	u8 rev_id;
-
-#define AVAIL_TD(p,q)   ((p)->options.numtx-((p)->td_used[(q)]))
+	struct tx_info {
+		int numq;
+
+		/* FIXME: the locality of the data seems rather poor. */
+		int used[TX_QUEUE_NO];
+		int curr[TX_QUEUE_NO];
+		int tail[TX_QUEUE_NO];
+		struct tx_desc *rings[TX_QUEUE_NO];
+		struct velocity_td_info *infos[TX_QUEUE_NO];
+		dma_addr_t pool_dma[TX_QUEUE_NO];
+	} tx;
+
+	struct rx_info {
+		int buf_sz;
+
+		int dirty;
+		int curr;
+		u32 filled;
+		struct rx_desc *ring;
+		struct velocity_rd_info *info;	/* It's an array */
+		dma_addr_t pool_dma;
+	} rx;
 
-	int num_txq;
-
-	volatile int td_used[TX_QUEUE_NO];
-	int td_curr[TX_QUEUE_NO];
-	int td_tail[TX_QUEUE_NO];
-	struct tx_desc *td_rings[TX_QUEUE_NO];
-	struct velocity_td_info *td_infos[TX_QUEUE_NO];
-
-	int rd_curr;
-	int rd_dirty;
-	u32 rd_filled;
-	struct rx_desc *rd_ring;
-	struct velocity_rd_info *rd_info;	/* It's an array */
-
-#define GET_RD_BY_IDX(vptr, idx)   (vptr->rd_ring[idx])
 	u32 mib_counter[MAX_HW_MIB_COUNTER];
 	struct velocity_opt options;
 
@@ -1538,7 +1543,6 @@ struct velocity_info {
 
 	u32 flags;
 
-	int rx_buf_sz;
 	u32 mii_status;
 	u32 phy_id;
 	int multicast_limit;
@@ -1554,8 +1558,8 @@ struct velocity_info {
 	struct velocity_context context;
 
 	u32 ticks;
-	u32 rx_bytes;
 
+	u8 rev_id;
 };
 
 /**
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 846be60e782..2ae2ec40015 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -25,7 +25,7 @@ if WAN
 # There is no way to detect a comtrol sv11 - force it modular for now.
 config HOSTESS_SV11
 	tristate "Comtrol Hostess SV-11 support"
-	depends on ISA && m && ISA_DMA_API && INET
+	depends on ISA && m && ISA_DMA_API && INET && HDLC
 	help
 	  Driver for Comtrol Hostess SV-11 network card which
 	  operates on low speed synchronous serial links at up to
@@ -37,7 +37,7 @@ config HOSTESS_SV11
 # The COSA/SRP driver has not been tested as non-modular yet.
 config COSA
 	tristate "COSA/SRP sync serial boards support"
-	depends on ISA && m && ISA_DMA_API
+	depends on ISA && m && ISA_DMA_API && HDLC
 	---help---
 	  Driver for COSA and SRP synchronous serial boards.
 
@@ -61,7 +61,7 @@ config COSA
 #
 config LANMEDIA
 	tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards"
-	depends on PCI && VIRT_TO_BUS
+	depends on PCI && VIRT_TO_BUS && HDLC
 	---help---
 	  Driver for the following Lan Media family of serial boards:
 
@@ -78,9 +78,8 @@ config LANMEDIA
 	  - LMC 5245 board connects directly to a T3 circuit saving the
 	  additional external hardware.
 
-	  To change setting such as syncPPP vs Cisco HDLC or clock source you
-	  will need lmcctl.  It is available at <ftp://ftp.lanmedia.com/>
-	  (broken link).
+	  To change setting such as clock source you will need lmcctl.
+	  It is available at <ftp://ftp.lanmedia.com/> (broken link).
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called lmc.
@@ -88,7 +87,7 @@ config LANMEDIA
 # There is no way to detect a Sealevel board. Force it modular
 config SEALEVEL_4021
 	tristate "Sealevel Systems 4021 support"
-	depends on ISA && m && ISA_DMA_API && INET
+	depends on ISA && m && ISA_DMA_API && INET && HDLC
 	help
 	  This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
 
@@ -154,8 +153,6 @@ config HDLC_PPP
 	help
 	  Generic HDLC driver supporting PPP over WAN connections.
 
-	  It will be replaced by new PPP implementation in Linux 2.6.26.
-
 	  If unsure, say N.
 
 config HDLC_X25
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index d61fef36afc..102549605d0 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -21,12 +21,11 @@ pc300-y				:= pc300_drv.o
 pc300-$(CONFIG_PC300_MLPPP)	+= pc300_tty.o
 pc300-objs			:= $(pc300-y)
 
-obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	syncppp.o	hostess_sv11.o
-obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	syncppp.o	sealevel.o
-obj-$(CONFIG_COSA)		+=		syncppp.o	cosa.o
-obj-$(CONFIG_FARSYNC)		+=		syncppp.o	farsync.o
-obj-$(CONFIG_DSCC4)             +=				dscc4.o
-obj-$(CONFIG_LANMEDIA)		+=		syncppp.o
+obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	hostess_sv11.o
+obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	sealevel.o
+obj-$(CONFIG_COSA)		+= cosa.o
+obj-$(CONFIG_FARSYNC)		+= farsync.o
+obj-$(CONFIG_DSCC4)             += dscc4.o
 obj-$(CONFIG_X25_ASY)		+= x25_asy.o
 
 obj-$(CONFIG_LANMEDIA)		+= lmc/
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index f7d3349dc3e..f14051556c8 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -2,6 +2,7 @@
 
 /*
  *  Copyright (C) 1995-1997  Jan "Yenya" Kasprzak <kas@fi.muni.cz>
+ *  Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -54,7 +55,7 @@
  *
  * The Linux driver (unlike the present *BSD drivers :-) can work even
  * for the COSA and SRP in one computer and allows each channel to work
- * in one of the three modes (character device, Cisco HDLC, Sync PPP).
+ * in one of the two modes (character or network device).
  *
  * AUTHOR
  *
@@ -72,12 +73,6 @@
  * The Comtrol Hostess SV11 driver by Alan Cox
  * The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox
  */
-/*
- *     5/25/1999 : Marcelo Tosatti <marcelo@conectiva.com.br>
- *             fixed a deadlock in cosa_sppp_open
- */
-
-/* ---------- Headers, macros, data structures ---------- */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -86,6 +81,7 @@
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/netdevice.h>
@@ -93,14 +89,12 @@
 #include <linux/mutex.h>
 #include <linux/device.h>
 #include <linux/smp_lock.h>
-
-#undef COSA_SLOW_IO	/* for testing purposes only */
-
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
 
-#include <net/syncppp.h>
+#undef COSA_SLOW_IO	/* for testing purposes only */
+
 #include "cosa.h"
 
 /* Maximum length of the identification string. */
@@ -112,7 +106,6 @@
 /* Per-channel data structure */
 
 struct channel_data {
-	void *if_ptr;	/* General purpose pointer (used by SPPP) */
 	int usage;	/* Usage count; >0 for chrdev, -1 for netdev */
 	int num;	/* Number of the channel */
 	struct cosa_data *cosa;	/* Pointer to the per-card structure */
@@ -136,10 +129,9 @@ struct channel_data {
 	wait_queue_head_t txwaitq, rxwaitq;
 	int tx_status, rx_status;
 
-	/* SPPP/HDLC device parts */
-	struct ppp_device pppdev;
+	/* generic HDLC device parts */
+	struct net_device *netdev;
 	struct sk_buff *rx_skb, *tx_skb;
-	struct net_device_stats stats;
 };
 
 /* cosa->firmware_status bits */
@@ -281,21 +273,19 @@ static int cosa_start_tx(struct channel_data *channel, char *buf, int size);
 static void cosa_kick(struct cosa_data *cosa);
 static int cosa_dma_able(struct channel_data *chan, char *buf, int data);
 
-/* SPPP/HDLC stuff */
-static void sppp_channel_init(struct channel_data *chan);
-static void sppp_channel_delete(struct channel_data *chan);
-static int cosa_sppp_open(struct net_device *d);
-static int cosa_sppp_close(struct net_device *d);
-static void cosa_sppp_timeout(struct net_device *d);
-static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *d);
-static char *sppp_setup_rx(struct channel_data *channel, int size);
-static int sppp_rx_done(struct channel_data *channel);
-static int sppp_tx_done(struct channel_data *channel, int size);
-static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-static struct net_device_stats *cosa_net_stats(struct net_device *dev);
+/* Network device stuff */
+static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
+			   unsigned short parity);
+static int cosa_net_open(struct net_device *d);
+static int cosa_net_close(struct net_device *d);
+static void cosa_net_timeout(struct net_device *d);
+static int cosa_net_tx(struct sk_buff *skb, struct net_device *d);
+static char *cosa_net_setup_rx(struct channel_data *channel, int size);
+static int cosa_net_rx_done(struct channel_data *channel);
+static int cosa_net_tx_done(struct channel_data *channel, int size);
+static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 
 /* Character device */
-static void chardev_channel_init(struct channel_data *chan);
 static char *chrdev_setup_rx(struct channel_data *channel, int size);
 static int chrdev_rx_done(struct channel_data *channel);
 static int chrdev_tx_done(struct channel_data *channel, int size);
@@ -357,17 +347,17 @@ static void debug_status_in(struct cosa_data *cosa, int status);
 static void debug_status_out(struct cosa_data *cosa, int status);
 #endif
 
-
+static inline struct channel_data* dev_to_chan(struct net_device *dev)
+{
+	return (struct channel_data *)dev_to_hdlc(dev)->priv;
+}
+
 /* ---------- Initialization stuff ---------- */
 
 static int __init cosa_init(void)
 {
 	int i, err = 0;
 
-	printk(KERN_INFO "cosa v1.08 (c) 1997-2000 Jan Kasprzak <kas@fi.muni.cz>\n");
-#ifdef CONFIG_SMP
-	printk(KERN_INFO "cosa: SMP found. Please mail any success/failure reports to the author.\n");
-#endif
 	if (cosa_major > 0) {
 		if (register_chrdev(cosa_major, "cosa", &cosa_fops)) {
 			printk(KERN_WARNING "cosa: unable to get major %d\n",
@@ -402,7 +392,7 @@ static int __init cosa_init(void)
 				      NULL, "cosa%d", i);
 	err = 0;
 	goto out;
-	
+
 out_chrdev:
 	unregister_chrdev(cosa_major, "cosa");
 out:
@@ -414,43 +404,29 @@ static void __exit cosa_exit(void)
 {
 	struct cosa_data *cosa;
 	int i;
-	printk(KERN_INFO "Unloading the cosa module\n");
 
-	for (i=0; i<nr_cards; i++)
+	for (i = 0; i < nr_cards; i++)
 		device_destroy(cosa_class, MKDEV(cosa_major, i));
 	class_destroy(cosa_class);
-	for (cosa=cosa_cards; nr_cards--; cosa++) {
+
+	for (cosa = cosa_cards; nr_cards--; cosa++) {
 		/* Clean up the per-channel data */
-		for (i=0; i<cosa->nchannels; i++) {
+		for (i = 0; i < cosa->nchannels; i++) {
 			/* Chardev driver has no alloc'd per-channel data */
-			sppp_channel_delete(cosa->chan+i);
+			unregister_hdlc_device(cosa->chan[i].netdev);
+			free_netdev(cosa->chan[i].netdev);
 		}
 		/* Clean up the per-card data */
 		kfree(cosa->chan);
 		kfree(cosa->bouncebuf);
 		free_irq(cosa->irq, cosa);
 		free_dma(cosa->dma);
-		release_region(cosa->datareg,is_8bit(cosa)?2:4);
+		release_region(cosa->datareg, is_8bit(cosa) ? 2 : 4);
 	}
 	unregister_chrdev(cosa_major, "cosa");
 }
 module_exit(cosa_exit);
 
-/*
- * This function should register all the net devices needed for the
- * single channel.
- */
-static __inline__ void channel_init(struct channel_data *chan)
-{
-	sprintf(chan->name, "cosa%dc%d", chan->cosa->num, chan->num);
-
-	/* Initialize the chardev data structures */
-	chardev_channel_init(chan);
-
-	/* Register the sppp interface */
-	sppp_channel_init(chan);
-}
-	
 static int cosa_probe(int base, int irq, int dma)
 {
 	struct cosa_data *cosa = cosa_cards+nr_cards;
@@ -576,13 +552,43 @@ static int cosa_probe(int base, int irq, int dma)
 	/* Initialize the per-channel data */
 	cosa->chan = kcalloc(cosa->nchannels, sizeof(struct channel_data), GFP_KERNEL);
 	if (!cosa->chan) {
-	        err = -ENOMEM;
+		err = -ENOMEM;
 		goto err_out3;
 	}
-	for (i=0; i<cosa->nchannels; i++) {
-		cosa->chan[i].cosa = cosa;
-		cosa->chan[i].num = i;
-		channel_init(cosa->chan+i);
+
+	for (i = 0; i < cosa->nchannels; i++) {
+		struct channel_data *chan = &cosa->chan[i];
+
+		chan->cosa = cosa;
+		chan->num = i;
+		sprintf(chan->name, "cosa%dc%d", chan->cosa->num, i);
+
+		/* Initialize the chardev data structures */
+		mutex_init(&chan->rlock);
+		init_MUTEX(&chan->wsem);
+
+		/* Register the network interface */
+		if (!(chan->netdev = alloc_hdlcdev(chan))) {
+			printk(KERN_WARNING "%s: alloc_hdlcdev failed.\n",
+			       chan->name);
+			goto err_hdlcdev;
+		}
+		dev_to_hdlc(chan->netdev)->attach = cosa_net_attach;
+		dev_to_hdlc(chan->netdev)->xmit = cosa_net_tx;
+		chan->netdev->open = cosa_net_open;
+		chan->netdev->stop = cosa_net_close;
+		chan->netdev->do_ioctl = cosa_net_ioctl;
+		chan->netdev->tx_timeout = cosa_net_timeout;
+		chan->netdev->watchdog_timeo = TX_TIMEOUT;
+		chan->netdev->base_addr = chan->cosa->datareg;
+		chan->netdev->irq = chan->cosa->irq;
+		chan->netdev->dma = chan->cosa->dma;
+		if (register_hdlc_device(chan->netdev)) {
+			printk(KERN_WARNING "%s: register_hdlc_device()"
+			       " failed.\n", chan->netdev->name);
+			free_netdev(chan->netdev);
+			goto err_hdlcdev;
+		}
 	}
 
 	printk (KERN_INFO "cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
@@ -590,13 +596,20 @@ static int cosa_probe(int base, int irq, int dma)
 		cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels);
 
 	return nr_cards++;
+
+err_hdlcdev:
+	while (i-- > 0) {
+		unregister_hdlc_device(cosa->chan[i].netdev);
+		free_netdev(cosa->chan[i].netdev);
+	}
+	kfree(cosa->chan);
 err_out3:
 	kfree(cosa->bouncebuf);
 err_out2:
 	free_dma(cosa->dma);
 err_out1:
 	free_irq(cosa->irq, cosa);
-err_out:	
+err_out:
 	release_region(cosa->datareg,is_8bit(cosa)?2:4);
 	printk(KERN_NOTICE "cosa%d: allocating resources failed\n",
 	       cosa->num);
@@ -604,54 +617,19 @@ err_out:
 }
 
 
-/*---------- SPPP/HDLC netdevice ---------- */
+/*---------- network device ---------- */
 
-static void cosa_setup(struct net_device *d)
+static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
+			   unsigned short parity)
 {
-	d->open = cosa_sppp_open;
-	d->stop = cosa_sppp_close;
-	d->hard_start_xmit = cosa_sppp_tx;
-	d->do_ioctl = cosa_sppp_ioctl;
-	d->get_stats = cosa_net_stats;
-	d->tx_timeout = cosa_sppp_timeout;
-	d->watchdog_timeo = TX_TIMEOUT;
-}
-
-static void sppp_channel_init(struct channel_data *chan)
-{
-	struct net_device *d;
-	chan->if_ptr = &chan->pppdev;
-	d = alloc_netdev(0, chan->name, cosa_setup);
-	if (!d) {
-		printk(KERN_WARNING "%s: alloc_netdev failed.\n", chan->name);
-		return;
-	}
-	chan->pppdev.dev = d;
-	d->base_addr = chan->cosa->datareg;
-	d->irq = chan->cosa->irq;
-	d->dma = chan->cosa->dma;
-	d->ml_priv = chan;
-	sppp_attach(&chan->pppdev);
-	if (register_netdev(d)) {
-		printk(KERN_WARNING "%s: register_netdev failed.\n", d->name);
-		sppp_detach(d);
-		free_netdev(d);
-		chan->pppdev.dev = NULL;
-		return;
-	}
-}
-
-static void sppp_channel_delete(struct channel_data *chan)
-{
-	unregister_netdev(chan->pppdev.dev);
-	sppp_detach(chan->pppdev.dev);
-	free_netdev(chan->pppdev.dev);
-	chan->pppdev.dev = NULL;
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
 
-static int cosa_sppp_open(struct net_device *d)
+static int cosa_net_open(struct net_device *dev)
 {
-	struct channel_data *chan = d->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 	int err;
 	unsigned long flags;
 
@@ -662,36 +640,35 @@ static int cosa_sppp_open(struct net_device *d)
 	}
 	spin_lock_irqsave(&chan->cosa->lock, flags);
 	if (chan->usage != 0) {
-		printk(KERN_WARNING "%s: sppp_open called with usage count %d\n",
-			chan->name, chan->usage);
+		printk(KERN_WARNING "%s: cosa_net_open called with usage count"
+		       " %d\n", chan->name, chan->usage);
 		spin_unlock_irqrestore(&chan->cosa->lock, flags);
 		return -EBUSY;
 	}
-	chan->setup_rx = sppp_setup_rx;
-	chan->tx_done = sppp_tx_done;
-	chan->rx_done = sppp_rx_done;
-	chan->usage=-1;
+	chan->setup_rx = cosa_net_setup_rx;
+	chan->tx_done = cosa_net_tx_done;
+	chan->rx_done = cosa_net_rx_done;
+	chan->usage = -1;
 	chan->cosa->usage++;
 	spin_unlock_irqrestore(&chan->cosa->lock, flags);
 
-	err = sppp_open(d);
+	err = hdlc_open(dev);
 	if (err) {
 		spin_lock_irqsave(&chan->cosa->lock, flags);
-		chan->usage=0;
+		chan->usage = 0;
 		chan->cosa->usage--;
-		
 		spin_unlock_irqrestore(&chan->cosa->lock, flags);
 		return err;
 	}
 
-	netif_start_queue(d);
+	netif_start_queue(dev);
 	cosa_enable_rx(chan);
 	return 0;
 }
 
-static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev)
+static int cosa_net_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct channel_data *chan = dev->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 
 	netif_stop_queue(dev);
 
@@ -700,16 +677,16 @@ static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev)
 	return 0;
 }
 
-static void cosa_sppp_timeout(struct net_device *dev)
+static void cosa_net_timeout(struct net_device *dev)
 {
-	struct channel_data *chan = dev->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 
 	if (test_bit(RXBIT, &chan->cosa->rxtx)) {
-		chan->stats.rx_errors++;
-		chan->stats.rx_missed_errors++;
+		chan->netdev->stats.rx_errors++;
+		chan->netdev->stats.rx_missed_errors++;
 	} else {
-		chan->stats.tx_errors++;
-		chan->stats.tx_aborted_errors++;
+		chan->netdev->stats.tx_errors++;
+		chan->netdev->stats.tx_aborted_errors++;
 	}
 	cosa_kick(chan->cosa);
 	if (chan->tx_skb) {
@@ -719,13 +696,13 @@ static void cosa_sppp_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-static int cosa_sppp_close(struct net_device *d)
+static int cosa_net_close(struct net_device *dev)
 {
-	struct channel_data *chan = d->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 	unsigned long flags;
 
-	netif_stop_queue(d);
-	sppp_close(d);
+	netif_stop_queue(dev);
+	hdlc_close(dev);
 	cosa_disable_rx(chan);
 	spin_lock_irqsave(&chan->cosa->lock, flags);
 	if (chan->rx_skb) {
@@ -736,13 +713,13 @@ static int cosa_sppp_close(struct net_device *d)
 		kfree_skb(chan->tx_skb);
 		chan->tx_skb = NULL;
 	}
-	chan->usage=0;
+	chan->usage = 0;
 	chan->cosa->usage--;
 	spin_unlock_irqrestore(&chan->cosa->lock, flags);
 	return 0;
 }
 
-static char *sppp_setup_rx(struct channel_data *chan, int size)
+static char *cosa_net_setup_rx(struct channel_data *chan, int size)
 {
 	/*
 	 * We can safely fall back to non-dma-able memory, because we have
@@ -754,66 +731,53 @@ static char *sppp_setup_rx(struct channel_data *chan, int size)
 	if (chan->rx_skb == NULL) {
 		printk(KERN_NOTICE "%s: Memory squeeze, dropping packet\n",
 			chan->name);
-		chan->stats.rx_dropped++;
+		chan->netdev->stats.rx_dropped++;
 		return NULL;
 	}
-	chan->pppdev.dev->trans_start = jiffies;
+	chan->netdev->trans_start = jiffies;
 	return skb_put(chan->rx_skb, size);
 }
 
-static int sppp_rx_done(struct channel_data *chan)
+static int cosa_net_rx_done(struct channel_data *chan)
 {
 	if (!chan->rx_skb) {
 		printk(KERN_WARNING "%s: rx_done with empty skb!\n",
 			chan->name);
-		chan->stats.rx_errors++;
-		chan->stats.rx_frame_errors++;
+		chan->netdev->stats.rx_errors++;
+		chan->netdev->stats.rx_frame_errors++;
 		return 0;
 	}
-	chan->rx_skb->protocol = htons(ETH_P_WAN_PPP);
-	chan->rx_skb->dev = chan->pppdev.dev;
+	chan->rx_skb->protocol = hdlc_type_trans(chan->rx_skb, chan->netdev);
+	chan->rx_skb->dev = chan->netdev;
 	skb_reset_mac_header(chan->rx_skb);
-	chan->stats.rx_packets++;
-	chan->stats.rx_bytes += chan->cosa->rxsize;
+	chan->netdev->stats.rx_packets++;
+	chan->netdev->stats.rx_bytes += chan->cosa->rxsize;
 	netif_rx(chan->rx_skb);
 	chan->rx_skb = NULL;
-	chan->pppdev.dev->last_rx = jiffies;
+	chan->netdev->last_rx = jiffies;
 	return 0;
 }
 
 /* ARGSUSED */
-static int sppp_tx_done(struct channel_data *chan, int size)
+static int cosa_net_tx_done(struct channel_data *chan, int size)
 {
 	if (!chan->tx_skb) {
 		printk(KERN_WARNING "%s: tx_done with empty skb!\n",
 			chan->name);
-		chan->stats.tx_errors++;
-		chan->stats.tx_aborted_errors++;
+		chan->netdev->stats.tx_errors++;
+		chan->netdev->stats.tx_aborted_errors++;
 		return 1;
 	}
 	dev_kfree_skb_irq(chan->tx_skb);
 	chan->tx_skb = NULL;
-	chan->stats.tx_packets++;
-	chan->stats.tx_bytes += size;
-	netif_wake_queue(chan->pppdev.dev);
+	chan->netdev->stats.tx_packets++;
+	chan->netdev->stats.tx_bytes += size;
+	netif_wake_queue(chan->netdev);
 	return 1;
 }
 
-static struct net_device_stats *cosa_net_stats(struct net_device *dev)
-{
-	struct channel_data *chan = dev->ml_priv;
-	return &chan->stats;
-}
-
-
 /*---------- Character device ---------- */
 
-static void chardev_channel_init(struct channel_data *chan)
-{
-	mutex_init(&chan->rlock);
-	init_MUTEX(&chan->wsem);
-}
-
 static ssize_t cosa_read(struct file *file,
 	char __user *buf, size_t count, loff_t *ppos)
 {
@@ -1223,16 +1187,15 @@ static int cosa_ioctl_common(struct cosa_data *cosa,
 	return -ENOIOCTLCMD;
 }
 
-static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr,
-	int cmd)
+static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	int rv;
-	struct channel_data *chan = dev->ml_priv;
-	rv = cosa_ioctl_common(chan->cosa, chan, cmd, (unsigned long)ifr->ifr_data);
-	if (rv == -ENOIOCTLCMD) {
-		return sppp_do_ioctl(dev, ifr, cmd);
-	}
-	return rv;
+	struct channel_data *chan = dev_to_chan(dev);
+	rv = cosa_ioctl_common(chan->cosa, chan, cmd,
+			       (unsigned long)ifr->ifr_data);
+	if (rv != -ENOIOCTLCMD)
+		return rv;
+	return hdlc_ioctl(dev, ifr, cmd);
 }
 
 static int cosa_chardev_ioctl(struct inode *inode, struct file *file,
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 50ef5b4efd6..f5d55ad0226 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -103,7 +103,6 @@
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
 #include <linux/delay.h>
-#include <net/syncppp.h>
 #include <linux/hdlc.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 754f00809e3..9557ad078ab 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -47,10 +47,7 @@ MODULE_LICENSE("GPL");
 /*      Default parameters for the link
  */
 #define FST_TX_QUEUE_LEN        100	/* At 8Mbps a longer queue length is
-					 * useful, the syncppp module forces
-					 * this down assuming a slower line I
-					 * guess.
-					 */
+					 * useful */
 #define FST_TXQ_DEPTH           16	/* This one is for the buffering
 					 * of frames on the way down to the card
 					 * so that we can keep the card busy
diff --git a/drivers/net/wan/farsync.h b/drivers/net/wan/farsync.h
index d871dafa87a..6b27e7c3d44 100644
--- a/drivers/net/wan/farsync.h
+++ b/drivers/net/wan/farsync.h
@@ -54,9 +54,6 @@
 
 
 /*      Ioctl call command values
- *
- *      The first three private ioctls are used by the sync-PPP module,
- *      allowing a little room for expansion we start our numbering at 10.
  */
 #define FSTWRITE        (SIOCDEVPRIVATE+10)
 #define FSTCPURESET     (SIOCDEVPRIVATE+11)
@@ -202,9 +199,6 @@ struct fstioc_info {
 #define J1              7
 
 /* "proto" */
-#define FST_HDLC        1               /* Cisco compatible HDLC */
-#define FST_PPP         2               /* Sync PPP */
-#define FST_MONITOR     3               /* Monitor only (raw packet reception) */
 #define FST_RAW         4               /* Two way raw packets */
 #define FST_GEN_HDLC    5               /* Using "Generic HDLC" module */
 
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index e3a536477c7..1f2a140c9f7 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -22,20 +22,19 @@
  * - proto->start() and stop() are called with spin_lock_irq held.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/notifier.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <net/net_namespace.h>
 
 
@@ -109,7 +108,7 @@ static int hdlc_device_event(struct notifier_block *this, unsigned long event,
 
 	if (dev->get_stats != hdlc_get_stats)
 		return NOTIFY_DONE; /* not an HDLC device */
- 
+
 	if (event != NETDEV_CHANGE)
 		return NOTIFY_DONE; /* Only interrested in carrier changes */
 
@@ -357,7 +356,7 @@ static struct packet_type hdlc_packet_type = {
 
 
 static struct notifier_block hdlc_notifier = {
-        .notifier_call = hdlc_device_event,
+	.notifier_call = hdlc_device_event,
 };
 
 
@@ -367,8 +366,8 @@ static int __init hdlc_module_init(void)
 
 	printk(KERN_INFO "%s\n", version);
 	if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0)
-                return result;
-        dev_add_pack(&hdlc_packet_type);
+		return result;
+	dev_add_pack(&hdlc_packet_type);
 	return 0;
 }
 
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 849819c2552..44e64b15dbd 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -9,19 +9,18 @@
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 #undef DEBUG_HARD_HEADER
 
@@ -68,9 +67,9 @@ struct cisco_state {
 static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr);
 
 
-static inline struct cisco_state * state(hdlc_device *hdlc)
+static inline struct cisco_state* state(hdlc_device *hdlc)
 {
-	return(struct cisco_state *)(hdlc->state);
+	return (struct cisco_state *)hdlc->state;
 }
 
 
@@ -172,7 +171,7 @@ static int cisco_rx(struct sk_buff *skb)
 	    data->address != CISCO_UNICAST)
 		goto rx_error;
 
-	switch(ntohs(data->protocol)) {
+	switch (ntohs(data->protocol)) {
 	case CISCO_SYS_INFO:
 		/* Packet is not needed, drop it. */
 		dev_kfree_skb_any(skb);
@@ -336,7 +335,7 @@ static struct hdlc_proto proto = {
 static const struct header_ops cisco_header_ops = {
 	.create = cisco_hard_header,
 };
- 
+
 static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 {
 	cisco_proto __user *cisco_s = ifr->ifr_settings.ifs_ifsu.cisco;
@@ -359,10 +358,10 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 		return 0;
 
 	case IF_PROTO_CISCO:
-		if(!capable(CAP_NET_ADMIN))
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		if(dev->flags & IFF_UP)
+		if (dev->flags & IFF_UP)
 			return -EBUSY;
 
 		if (copy_from_user(&new_settings, cisco_s, size))
@@ -372,7 +371,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 		    new_settings.timeout < 2)
 			return -EINVAL;
 
-		result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
+		result = hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
 		if (result)
 			return result;
 
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 62e93dac6b1..d3d5055741a 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -33,20 +33,19 @@
 
 */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/etherdevice.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/etherdevice.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 #undef DEBUG_PKT
 #undef DEBUG_ECN
@@ -96,7 +95,7 @@ typedef struct {
 	unsigned ea1:	1;
 	unsigned cr:	1;
 	unsigned dlcih:	6;
-  
+
 	unsigned ea2:	1;
 	unsigned de:	1;
 	unsigned becn:	1;
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 00308337928..4efe9e6d32d 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -9,19 +9,18 @@
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <net/syncppp.h>
 
 struct ppp_state {
diff --git a/drivers/net/wan/hdlc_raw.c b/drivers/net/wan/hdlc_raw.c
index bbbb819d764..8612311748f 100644
--- a/drivers/net/wan/hdlc_raw.c
+++ b/drivers/net/wan/hdlc_raw.c
@@ -9,19 +9,18 @@
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 
 static int raw_ioctl(struct net_device *dev, struct ifreq *ifr);
diff --git a/drivers/net/wan/hdlc_raw_eth.c b/drivers/net/wan/hdlc_raw_eth.c
index 26dee600506..a13fc320752 100644
--- a/drivers/net/wan/hdlc_raw_eth.c
+++ b/drivers/net/wan/hdlc_raw_eth.c
@@ -9,20 +9,19 @@
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/etherdevice.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
+#include <linux/inetdevice.h>
 #include <linux/init.h>
-#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/etherdevice.h>
-#include <linux/hdlc.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr);
 
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index e808720030e..8b7e5d2e2ac 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -9,20 +9,19 @@
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
+#include <linux/hdlc.h>
 #include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/pkt_sched.h>
 #include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/lapb.h>
+#include <linux/module.h>
+#include <linux/pkt_sched.h>
+#include <linux/poll.h>
 #include <linux/rtnetlink.h>
-#include <linux/hdlc.h>
-
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <net/x25device.h>
 
 static int x25_ioctl(struct net_device *dev, struct ifreq *ifr);
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index f3065d3473f..e299313f828 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -16,6 +16,8 @@
  *	touching control registers.
  *
  *	Port B isnt wired (why - beats me)
+ *
+ *	Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
  */
 
 #include <linux/module.h>
@@ -26,6 +28,7 @@
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/ioport.h>
 #include <net/arp.h>
 
@@ -33,34 +36,31 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
-#include <net/syncppp.h>
 #include "z85230.h"
 
 static int dma;
 
-struct sv11_device
-{
-	void *if_ptr;	/* General purpose pointer (used by SPPP) */
-	struct z8530_dev sync;
-	struct ppp_device netdev;
-};
-
 /*
  *	Network driver support routines
  */
 
+static inline struct z8530_dev* dev_to_sv(struct net_device *dev)
+{
+	return (struct z8530_dev *)dev_to_hdlc(dev)->priv;
+}
+
 /*
- *	Frame receive. Simple for our card as we do sync ppp and there
+ *	Frame receive. Simple for our card as we do HDLC and there
  *	is no funny garbage involved
  */
- 
+
 static void hostess_input(struct z8530_channel *c, struct sk_buff *skb)
 {
 	/* Drop the CRC - it's not a good idea to try and negotiate it ;) */
-	skb_trim(skb, skb->len-2);
-	skb->protocol=__constant_htons(ETH_P_WAN_PPP);
+	skb_trim(skb, skb->len - 2);
+	skb->protocol = hdlc_type_trans(skb, c->netdevice);
 	skb_reset_mac_header(skb);
-	skb->dev=c->netdevice;
+	skb->dev = c->netdevice;
 	/*
 	 *	Send it to the PPP layer. We don't have time to process
 	 *	it right now.
@@ -68,56 +68,51 @@ static void hostess_input(struct z8530_channel *c, struct sk_buff *skb)
 	netif_rx(skb);
 	c->netdevice->last_rx = jiffies;
 }
- 
+
 /*
  *	We've been placed in the UP state
- */ 
- 
+ */
+
 static int hostess_open(struct net_device *d)
 {
-	struct sv11_device *sv11=d->ml_priv;
+	struct z8530_dev *sv11 = dev_to_sv(d);
 	int err = -1;
-	
+
 	/*
 	 *	Link layer up
 	 */
-	switch(dma)
-	{
+	switch (dma) {
 		case 0:
-			err=z8530_sync_open(d, &sv11->sync.chanA);
+			err = z8530_sync_open(d, &sv11->chanA);
 			break;
 		case 1:
-			err=z8530_sync_dma_open(d, &sv11->sync.chanA);
+			err = z8530_sync_dma_open(d, &sv11->chanA);
 			break;
 		case 2:
-			err=z8530_sync_txdma_open(d, &sv11->sync.chanA);
+			err = z8530_sync_txdma_open(d, &sv11->chanA);
 			break;
 	}
-	
-	if(err)
+
+	if (err)
 		return err;
-	/*
-	 *	Begin PPP
-	 */
-	err=sppp_open(d);
-	if(err)
-	{
-		switch(dma)
-		{
+
+	err = hdlc_open(d);
+	if (err) {
+		switch (dma) {
 			case 0:
-				z8530_sync_close(d, &sv11->sync.chanA);
+				z8530_sync_close(d, &sv11->chanA);
 				break;
 			case 1:
-				z8530_sync_dma_close(d, &sv11->sync.chanA);
+				z8530_sync_dma_close(d, &sv11->chanA);
 				break;
 			case 2:
-				z8530_sync_txdma_close(d, &sv11->sync.chanA);
+				z8530_sync_txdma_close(d, &sv11->chanA);
 				break;
-		}				
+		}
 		return err;
 	}
-	sv11->sync.chanA.rx_function=hostess_input;
-	
+	sv11->chanA.rx_function = hostess_input;
+
 	/*
 	 *	Go go go
 	 */
@@ -128,30 +123,24 @@ static int hostess_open(struct net_device *d)
 
 static int hostess_close(struct net_device *d)
 {
-	struct sv11_device *sv11=d->ml_priv;
+	struct z8530_dev *sv11 = dev_to_sv(d);
 	/*
 	 *	Discard new frames
 	 */
-	sv11->sync.chanA.rx_function=z8530_null_rx;
-	/*
-	 *	PPP off
-	 */
-	sppp_close(d);
-	/*
-	 *	Link layer down
-	 */
+	sv11->chanA.rx_function = z8530_null_rx;
+
+	hdlc_close(d);
 	netif_stop_queue(d);
-		
-	switch(dma)
-	{
+
+	switch (dma) {
 		case 0:
-			z8530_sync_close(d, &sv11->sync.chanA);
+			z8530_sync_close(d, &sv11->chanA);
 			break;
 		case 1:
-			z8530_sync_dma_close(d, &sv11->sync.chanA);
+			z8530_sync_dma_close(d, &sv11->chanA);
 			break;
 		case 2:
-			z8530_sync_txdma_close(d, &sv11->sync.chanA);
+			z8530_sync_txdma_close(d, &sv11->chanA);
 			break;
 	}
 	return 0;
@@ -159,232 +148,174 @@ static int hostess_close(struct net_device *d)
 
 static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
 {
-	/* struct sv11_device *sv11=d->ml_priv;
-	   z8530_ioctl(d,&sv11->sync.chanA,ifr,cmd) */
-	return sppp_do_ioctl(d, ifr,cmd);
-}
-
-static struct net_device_stats *hostess_get_stats(struct net_device *d)
-{
-	struct sv11_device *sv11=d->ml_priv;
-	if(sv11)
-		return z8530_get_stats(&sv11->sync.chanA);
-	else
-		return NULL;
+	/* struct z8530_dev *sv11=dev_to_sv(d);
+	   z8530_ioctl(d,&sv11->chanA,ifr,cmd) */
+	return hdlc_ioctl(d, ifr, cmd);
 }
 
 /*
- *	Passed PPP frames, fire them downwind.
+ *	Passed network frames, fire them downwind.
  */
- 
+
 static int hostess_queue_xmit(struct sk_buff *skb, struct net_device *d)
 {
-	struct sv11_device *sv11=d->ml_priv;
-	return z8530_queue_xmit(&sv11->sync.chanA, skb);
+	return z8530_queue_xmit(&dev_to_sv(d)->chanA, skb);
 }
 
-static int hostess_neigh_setup(struct neighbour *n)
+static int hostess_attach(struct net_device *dev, unsigned short encoding,
+			  unsigned short parity)
 {
-	if (n->nud_state == NUD_NONE) {
-		n->ops = &arp_broken_ops;
-		n->output = n->ops->output;
-	}
-	return 0;
-}
-
-static int hostess_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
-{
-	if (p->tbl->family == AF_INET) {
-		p->neigh_setup = hostess_neigh_setup;
-		p->ucast_probes = 0;
-		p->mcast_probes = 0;
-	}
-	return 0;
-}
-
-static void sv11_setup(struct net_device *dev)
-{	
-	dev->open = hostess_open;
-	dev->stop = hostess_close;
-	dev->hard_start_xmit = hostess_queue_xmit;
-	dev->get_stats = hostess_get_stats;
-	dev->do_ioctl = hostess_ioctl;
-	dev->neigh_setup = hostess_neigh_setup_dev;
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
 
 /*
  *	Description block for a Comtrol Hostess SV11 card
  */
- 
-static struct sv11_device *sv11_init(int iobase, int irq)
+
+static struct z8530_dev *sv11_init(int iobase, int irq)
 {
-	struct z8530_dev *dev;
-	struct sv11_device *sv;
-	
+	struct z8530_dev *sv;
+	struct net_device *netdev;
 	/*
 	 *	Get the needed I/O space
 	 */
-	 
-	if(!request_region(iobase, 8, "Comtrol SV11"))
-	{	
-		printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n", iobase);
+
+	if (!request_region(iobase, 8, "Comtrol SV11")) {
+		printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n",
+		       iobase);
 		return NULL;
 	}
-	
-	sv = kzalloc(sizeof(struct sv11_device), GFP_KERNEL);
-	if(!sv)
-		goto fail3;
-			
-	sv->if_ptr=&sv->netdev;
-	
-	sv->netdev.dev = alloc_netdev(0, "hdlc%d", sv11_setup);
-	if(!sv->netdev.dev)
-		goto fail2;
-
-	dev=&sv->sync;
-	
+
+	sv = kzalloc(sizeof(struct z8530_dev), GFP_KERNEL);
+	if (!sv)
+		goto err_kzalloc;
+
 	/*
 	 *	Stuff in the I/O addressing
 	 */
-	 
-	dev->active = 0;
-	
-	dev->chanA.ctrlio=iobase+1;
-	dev->chanA.dataio=iobase+3;
-	dev->chanB.ctrlio=-1;
-	dev->chanB.dataio=-1;
-	dev->chanA.irqs=&z8530_nop;
-	dev->chanB.irqs=&z8530_nop;
-	
-	outb(0, iobase+4);		/* DMA off */
-	
+
+	sv->active = 0;
+
+	sv->chanA.ctrlio = iobase + 1;
+	sv->chanA.dataio = iobase + 3;
+	sv->chanB.ctrlio = -1;
+	sv->chanB.dataio = -1;
+	sv->chanA.irqs = &z8530_nop;
+	sv->chanB.irqs = &z8530_nop;
+
+	outb(0, iobase + 4);		/* DMA off */
+
 	/* We want a fast IRQ for this device. Actually we'd like an even faster
 	   IRQ ;) - This is one driver RtLinux is made for */
-	   
-	if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "Hostess SV11", dev)<0)
-	{
+
+	if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED,
+			"Hostess SV11", sv) < 0) {
 		printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq);
-		goto fail1;
+		goto err_irq;
 	}
-	
-	dev->irq=irq;
-	dev->chanA.private=sv;
-	dev->chanA.netdevice=sv->netdev.dev;
-	dev->chanA.dev=dev;
-	dev->chanB.dev=dev;
-	
-	if(dma)
-	{
+
+	sv->irq = irq;
+	sv->chanA.private = sv;
+	sv->chanA.dev = sv;
+	sv->chanB.dev = sv;
+
+	if (dma) {
 		/*
 		 *	You can have DMA off or 1 and 3 thats the lot
 		 *	on the Comtrol.
 		 */
-		dev->chanA.txdma=3;
-		dev->chanA.rxdma=1;
-		outb(0x03|0x08, iobase+4);		/* DMA on */
-		if(request_dma(dev->chanA.txdma, "Hostess SV/11 (TX)")!=0)
-			goto fail;
-			
-		if(dma==1)
-		{
-			if(request_dma(dev->chanA.rxdma, "Hostess SV/11 (RX)")!=0)
-				goto dmafail;
-		}
+		sv->chanA.txdma = 3;
+		sv->chanA.rxdma = 1;
+		outb(0x03 | 0x08, iobase + 4);		/* DMA on */
+		if (request_dma(sv->chanA.txdma, "Hostess SV/11 (TX)"))
+			goto err_txdma;
+
+		if (dma == 1)
+			if (request_dma(sv->chanA.rxdma, "Hostess SV/11 (RX)"))
+				goto err_rxdma;
 	}
 
 	/* Kill our private IRQ line the hostess can end up chattering
 	   until the configuration is set */
 	disable_irq(irq);
-		
+
 	/*
 	 *	Begin normal initialise
 	 */
-	 
-	if(z8530_init(dev)!=0)
-	{
+
+	if (z8530_init(sv)) {
 		printk(KERN_ERR "Z8530 series device not found.\n");
 		enable_irq(irq);
-		goto dmafail2;
+		goto free_dma;
 	}
-	z8530_channel_load(&dev->chanB, z8530_dead_port);
-	if(dev->type==Z85C30)
-		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream);
+	z8530_channel_load(&sv->chanB, z8530_dead_port);
+	if (sv->type == Z85C30)
+		z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream);
 	else
-		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230);
-	
+		z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream_85230);
+
 	enable_irq(irq);
-	
 
 	/*
 	 *	Now we can take the IRQ
 	 */
-	if(dev_alloc_name(dev->chanA.netdevice,"hdlc%d")>=0)
-	{
-		struct net_device *d=dev->chanA.netdevice;
 
-		/* 
-		 *	Initialise the PPP components
-		 */
-		d->ml_priv = sv;
-		sppp_attach(&sv->netdev);
-		
-		/*
-		 *	Local fields
-		 */	
-		
-		d->base_addr = iobase;
-		d->irq = irq;
-		
-		if(register_netdev(d))
-		{
-			printk(KERN_ERR "%s: unable to register device.\n",
-				d->name);
-			sppp_detach(d);
-			goto dmafail2;
-		}
+	sv->chanA.netdevice = netdev = alloc_hdlcdev(sv);
+	if (!netdev)
+		goto free_dma;
 
-		z8530_describe(dev, "I/O", iobase);
-		dev->active=1;
-		return sv;	
+	dev_to_hdlc(netdev)->attach = hostess_attach;
+	dev_to_hdlc(netdev)->xmit = hostess_queue_xmit;
+	netdev->open = hostess_open;
+	netdev->stop = hostess_close;
+	netdev->do_ioctl = hostess_ioctl;
+	netdev->base_addr = iobase;
+	netdev->irq = irq;
+
+	if (register_hdlc_device(netdev)) {
+		printk(KERN_ERR "hostess: unable to register HDLC device.\n");
+		free_netdev(netdev);
+		goto free_dma;
 	}
-dmafail2:
-	if(dma==1)
-		free_dma(dev->chanA.rxdma);
-dmafail:
-	if(dma)
-		free_dma(dev->chanA.txdma);
-fail:
-	free_irq(irq, dev);
-fail1:
-	free_netdev(sv->netdev.dev);
-fail2:
+
+	z8530_describe(sv, "I/O", iobase);
+	sv->active = 1;
+	return sv;
+
+free_dma:
+	if (dma == 1)
+		free_dma(sv->chanA.rxdma);
+err_rxdma:
+	if (dma)
+		free_dma(sv->chanA.txdma);
+err_txdma:
+	free_irq(irq, sv);
+err_irq:
 	kfree(sv);
-fail3:
-	release_region(iobase,8);
+err_kzalloc:
+	release_region(iobase, 8);
 	return NULL;
 }
 
-static void sv11_shutdown(struct sv11_device *dev)
+static void sv11_shutdown(struct z8530_dev *dev)
 {
-	sppp_detach(dev->netdev.dev);
-	unregister_netdev(dev->netdev.dev);
-	z8530_shutdown(&dev->sync);
-	free_irq(dev->sync.irq, dev);
-	if(dma)
-	{
-		if(dma==1)
-			free_dma(dev->sync.chanA.rxdma);
-		free_dma(dev->sync.chanA.txdma);
+	unregister_hdlc_device(dev->chanA.netdevice);
+	z8530_shutdown(dev);
+	free_irq(dev->irq, dev);
+	if (dma) {
+		if (dma == 1)
+			free_dma(dev->chanA.rxdma);
+		free_dma(dev->chanA.txdma);
 	}
-	release_region(dev->sync.chanA.ctrlio-1, 8);
-	free_netdev(dev->netdev.dev);
+	release_region(dev->chanA.ctrlio - 1, 8);
+	free_netdev(dev->chanA.netdevice);
 	kfree(dev);
 }
 
-#ifdef MODULE
-
-static int io=0x200;
-static int irq=9;
+static int io = 0x200;
+static int irq = 9;
 
 module_param(io, int, 0);
 MODULE_PARM_DESC(io, "The I/O base of the Comtrol Hostess SV11 card");
@@ -397,22 +328,17 @@ MODULE_AUTHOR("Alan Cox");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Modular driver for the Comtrol Hostess SV11");
 
-static struct sv11_device *sv11_unit;
+static struct z8530_dev *sv11_unit;
 
 int init_module(void)
 {
-	printk(KERN_INFO "SV-11 Z85230 Synchronous Driver v 0.03.\n");
-	printk(KERN_INFO "(c) Copyright 2001, Red Hat Inc.\n");	
-	if((sv11_unit=sv11_init(io,irq))==NULL)
+	if ((sv11_unit = sv11_init(io, irq)) == NULL)
 		return -ENODEV;
 	return 0;
 }
 
 void cleanup_module(void)
 {
-	if(sv11_unit)
+	if (sv11_unit)
 		sv11_shutdown(sv11_unit);
 }
-
-#endif
-
diff --git a/drivers/net/wan/lmc/lmc.h b/drivers/net/wan/lmc/lmc.h
index 882e58c1bfd..4ced7ac16c2 100644
--- a/drivers/net/wan/lmc/lmc.h
+++ b/drivers/net/wan/lmc/lmc.h
@@ -11,12 +11,12 @@ unsigned lmc_mii_readreg(lmc_softc_t * const sc, unsigned
       			  devaddr, unsigned regno);
 void lmc_mii_writereg(lmc_softc_t * const sc, unsigned devaddr,
 			       unsigned regno, unsigned data);
-void lmc_led_on(lmc_softc_t * const, u_int32_t);
-void lmc_led_off(lmc_softc_t * const, u_int32_t);
+void lmc_led_on(lmc_softc_t * const, u32);
+void lmc_led_off(lmc_softc_t * const, u32);
 unsigned lmc_mii_readreg(lmc_softc_t * const, unsigned, unsigned);
 void lmc_mii_writereg(lmc_softc_t * const, unsigned, unsigned, unsigned);
-void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits);
-void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits);
+void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits);
+void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits);
 
 int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 
@@ -26,8 +26,7 @@ extern lmc_media_t lmc_t1_media;
 extern lmc_media_t lmc_hssi_media;
 
 #ifdef _DBG_EVENTLOG
-static void lmcEventLog( u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3 );
+static void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3);
 #endif
 
 #endif
-
diff --git a/drivers/net/wan/lmc/lmc_debug.c b/drivers/net/wan/lmc/lmc_debug.c
index 3b94352b0d0..15049d711f4 100644
--- a/drivers/net/wan/lmc/lmc_debug.c
+++ b/drivers/net/wan/lmc/lmc_debug.c
@@ -1,4 +1,3 @@
-
 #include <linux/types.h>
 #include <linux/netdevice.h>
 #include <linux/interrupt.h>
@@ -48,10 +47,10 @@ void lmcConsoleLog(char *type, unsigned char *ucData, int iLen)
 #endif
 
 #ifdef DEBUG
-u_int32_t lmcEventLogIndex = 0;
-u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
+u32 lmcEventLogIndex;
+u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
 
-void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3)
+void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3)
 {
   lmcEventLogBuf[lmcEventLogIndex++] = EventNum;
   lmcEventLogBuf[lmcEventLogIndex++] = arg2;
diff --git a/drivers/net/wan/lmc/lmc_debug.h b/drivers/net/wan/lmc/lmc_debug.h
index cf3563859bf..2d46f121549 100644
--- a/drivers/net/wan/lmc/lmc_debug.h
+++ b/drivers/net/wan/lmc/lmc_debug.h
@@ -38,15 +38,15 @@
 
 
 #ifdef DEBUG
-extern u_int32_t lmcEventLogIndex;
-extern u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
+extern u32 lmcEventLogIndex;
+extern u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
 #define LMC_EVENT_LOG(x, y, z) lmcEventLog((x), (y), (z))
 #else
 #define LMC_EVENT_LOG(x,y,z)
 #endif /* end ifdef _DBG_EVENTLOG */
 
 void lmcConsoleLog(char *type, unsigned char *ucData, int iLen);
-void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3);
+void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3);
 void lmc_trace(struct net_device *dev, char *msg);
 
 #endif
diff --git a/drivers/net/wan/lmc/lmc_ioctl.h b/drivers/net/wan/lmc/lmc_ioctl.h
index 57dd861cd3d..72fb113a44c 100644
--- a/drivers/net/wan/lmc/lmc_ioctl.h
+++ b/drivers/net/wan/lmc/lmc_ioctl.h
@@ -61,7 +61,7 @@
 /*
  * IFTYPE defines
  */
-#define LMC_PPP         1               /* use sppp interface */
+#define LMC_PPP         1               /* use generic HDLC interface */
 #define LMC_NET         2               /* use direct net interface */
 #define LMC_RAW         3               /* use direct net interface */
 
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 62133cee446..f80640f5a74 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -1,6 +1,7 @@
  /*
   * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
   * All rights reserved.  www.lanmedia.com
+  * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
   *
   * This code is written by:
   * Andrew Stanley-Jones (asj@cban.com)
@@ -36,8 +37,6 @@
   *
   */
 
-/* $Id: lmc_main.c,v 1.36 2000/04/11 05:25:25 asj Exp $ */
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/string.h>
@@ -49,6 +48,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/init.h>
 #include <linux/in.h>
 #include <linux/if_arp.h>
@@ -57,9 +57,6 @@
 #include <linux/skbuff.h>
 #include <linux/inet.h>
 #include <linux/bitops.h>
-
-#include <net/syncppp.h>
-
 #include <asm/processor.h>             /* Processor type for cache alignment. */
 #include <asm/io.h>
 #include <asm/dma.h>
@@ -78,8 +75,6 @@
 #include "lmc_debug.h"
 #include "lmc_proto.h"
 
-static int lmc_first_load = 0;
-
 static int LMC_PKT_BUF_SZ = 1542;
 
 static struct pci_device_id lmc_pci_tbl[] = {
@@ -91,11 +86,10 @@ static struct pci_device_id lmc_pci_tbl[] = {
 };
 
 MODULE_DEVICE_TABLE(pci, lmc_pci_tbl);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 
 
 static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static int lmc_rx (struct net_device *dev);
 static int lmc_open(struct net_device *dev);
 static int lmc_close(struct net_device *dev);
@@ -114,20 +108,14 @@ static void lmc_driver_timeout(struct net_device *dev);
  * linux reserves 16 device specific IOCTLs.  We call them
  * LMCIOC* to control various bits of our world.
  */
-int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
+int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 {
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     lmc_ctl_t ctl;
-    int ret;
-    u_int16_t regVal;
+    int ret = -EOPNOTSUPP;
+    u16 regVal;
     unsigned long flags;
 
-    struct sppp *sp;
-
-    ret = -EOPNOTSUPP;
-
-    sc = dev->priv;
-
     lmc_trace(dev, "lmc_ioctl in");
 
     /*
@@ -149,7 +137,6 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
         break;
 
     case LMCIOCSINFO: /*fold01*/
-        sp = &((struct ppp_device *) dev)->sppp;
         if (!capable(CAP_NET_ADMIN)) {
             ret = -EPERM;
             break;
@@ -175,25 +162,20 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 		sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE;
         }
 
-        if (ctl.keepalive_onoff == LMC_CTL_OFF)
-            sp->pp_flags &= ~PP_KEEPALIVE;	/* Turn off */
-        else
-            sp->pp_flags |= PP_KEEPALIVE;	/* Turn on */
-
         ret = 0;
         break;
 
     case LMCIOCIFTYPE: /*fold01*/
         {
-            u_int16_t	old_type = sc->if_type;
-            u_int16_t	new_type;
+	    u16 old_type = sc->if_type;
+	    u16	new_type;
 
 	    if (!capable(CAP_NET_ADMIN)) {
 		ret = -EPERM;
 		break;
 	    }
 
-	    if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) {
+	    if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u16))) {
 		ret = -EFAULT;
 		break;
 	    }
@@ -206,15 +188,11 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
             }
             
             lmc_proto_close(sc);
-            lmc_proto_detach(sc);
 
             sc->if_type = new_type;
-//            lmc_proto_init(sc);
             lmc_proto_attach(sc);
-            lmc_proto_open(sc);
-
-	    ret = 0 ;
-	    break ;
+	    ret = lmc_proto_open(sc);
+	    break;
 	}
 
     case LMCIOCGETXINFO: /*fold01*/
@@ -241,51 +219,53 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 
         break;
 
-    case LMCIOCGETLMCSTATS: /*fold01*/
-        if (sc->lmc_cardtype == LMC_CARDTYPE_T1){
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_LSB);
-            sc->stats.framingBitErrorCount +=
-                lmc_mii_readreg (sc, 0, 18) & 0xff;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_MSB);
-            sc->stats.framingBitErrorCount +=
-                (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_LSB);
-            sc->stats.lineCodeViolationCount +=
-                lmc_mii_readreg (sc, 0, 18) & 0xff;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_MSB);
-            sc->stats.lineCodeViolationCount +=
-                (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_AERR);
-            regVal = lmc_mii_readreg (sc, 0, 18) & 0xff;
-
-            sc->stats.lossOfFrameCount +=
-                (regVal & T1FRAMER_LOF_MASK) >> 4;
-            sc->stats.changeOfFrameAlignmentCount +=
-                (regVal & T1FRAMER_COFA_MASK) >> 2;
-            sc->stats.severelyErroredFrameCount +=
-                regVal & T1FRAMER_SEF_MASK;
-        }
-
-        if (copy_to_user(ifr->ifr_data, &sc->stats,
-                         sizeof (struct lmc_statistics)))
-		ret = -EFAULT;
-	else
-		ret = 0;
-        break;
+    case LMCIOCGETLMCSTATS:
+	    if (sc->lmc_cardtype == LMC_CARDTYPE_T1) {
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_LSB);
+		    sc->extra_stats.framingBitErrorCount +=
+			    lmc_mii_readreg(sc, 0, 18) & 0xff;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_MSB);
+		    sc->extra_stats.framingBitErrorCount +=
+			    (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_LSB);
+		    sc->extra_stats.lineCodeViolationCount +=
+			    lmc_mii_readreg(sc, 0, 18) & 0xff;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_MSB);
+		    sc->extra_stats.lineCodeViolationCount +=
+			    (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_AERR);
+		    regVal = lmc_mii_readreg(sc, 0, 18) & 0xff;
+
+		    sc->extra_stats.lossOfFrameCount +=
+			    (regVal & T1FRAMER_LOF_MASK) >> 4;
+		    sc->extra_stats.changeOfFrameAlignmentCount +=
+			    (regVal & T1FRAMER_COFA_MASK) >> 2;
+		    sc->extra_stats.severelyErroredFrameCount +=
+			    regVal & T1FRAMER_SEF_MASK;
+	    }
+	    if (copy_to_user(ifr->ifr_data, &sc->lmc_device->stats,
+			     sizeof(sc->lmc_device->stats)) ||
+		copy_to_user(ifr->ifr_data + sizeof(sc->lmc_device->stats),
+			     &sc->extra_stats, sizeof(sc->extra_stats)))
+		    ret = -EFAULT;
+	    else
+		    ret = 0;
+	    break;
 
-    case LMCIOCCLEARLMCSTATS: /*fold01*/
-        if (!capable(CAP_NET_ADMIN)){
-            ret = -EPERM;
-            break;
-        }
+    case LMCIOCCLEARLMCSTATS:
+	    if (!capable(CAP_NET_ADMIN)) {
+		    ret = -EPERM;
+		    break;
+	    }
 
-        memset (&sc->stats, 0, sizeof (struct lmc_statistics));
-        sc->stats.check = STATCHECK;
-        sc->stats.version_size = (DRIVER_VERSION << 16) +
-            sizeof (struct lmc_statistics);
-        sc->stats.lmc_cardtype = sc->lmc_cardtype;
-        ret = 0;
-        break;
+	    memset(&sc->lmc_device->stats, 0, sizeof(sc->lmc_device->stats));
+	    memset(&sc->extra_stats, 0, sizeof(sc->extra_stats));
+	    sc->extra_stats.check = STATCHECK;
+	    sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
+		    sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
+	    sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
+	    ret = 0;
+	    break;
 
     case LMCIOCSETCIRCUIT: /*fold01*/
         if (!capable(CAP_NET_ADMIN)){
@@ -330,7 +310,8 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 		ret = -EFAULT;
 		break;
 	}
-        if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf)))
+	if (copy_to_user(ifr->ifr_data + sizeof(u32), lmcEventLogBuf,
+			 sizeof(lmcEventLogBuf)))
 		ret = -EFAULT;
 	else
 		ret = 0;
@@ -641,14 +622,12 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 /* the watchdog process that cruises around */
 static void lmc_watchdog (unsigned long data) /*fold00*/
 {
-    struct net_device *dev = (struct net_device *) data;
-    lmc_softc_t *sc;
+    struct net_device *dev = (struct net_device *)data;
+    lmc_softc_t *sc = dev_to_sc(dev);
     int link_status;
-    u_int32_t ticks;
+    u32 ticks;
     unsigned long flags;
 
-    sc = dev->priv;
-
     lmc_trace(dev, "lmc_watchdog in");
 
     spin_lock_irqsave(&sc->lmc_lock, flags);
@@ -677,22 +656,22 @@ static void lmc_watchdog (unsigned long data) /*fold00*/
      * check for a transmit interrupt timeout
      * Has the packet xmt vs xmt serviced threshold been exceeded */
     if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
-        sc->stats.tx_packets > sc->lasttx_packets &&
-        sc->tx_TimeoutInd == 0)
+	sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
+	sc->tx_TimeoutInd == 0)
     {
 
         /* wait for the watchdog to come around again */
         sc->tx_TimeoutInd = 1;
     }
     else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
-             sc->stats.tx_packets > sc->lasttx_packets &&
-             sc->tx_TimeoutInd)
+	     sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
+	     sc->tx_TimeoutInd)
     {
 
         LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0);
 
         sc->tx_TimeoutDisplay = 1;
-        sc->stats.tx_TimeoutCnt++;
+	sc->extra_stats.tx_TimeoutCnt++;
 
         /* DEC chip is stuck, hit it with a RESET!!!! */
         lmc_running_reset (dev);
@@ -712,13 +691,11 @@ static void lmc_watchdog (unsigned long data) /*fold00*/
         /* reset the transmit timeout detection flag */
         sc->tx_TimeoutInd = 0;
         sc->lastlmc_taint_tx = sc->lmc_taint_tx;
-        sc->lasttx_packets = sc->stats.tx_packets;
-    }
-    else
-    {
+	sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
+    } else {
         sc->tx_TimeoutInd = 0;
         sc->lastlmc_taint_tx = sc->lmc_taint_tx;
-        sc->lasttx_packets = sc->stats.tx_packets;
+	sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
     }
 
     /* --- end time out check ----------------------------------- */
@@ -748,19 +725,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/
          sc->last_link_status = 1;
          /* lmc_reset (sc); Again why reset??? */
 
-         /* Inform the world that link protocol is back up. */
 	 netif_carrier_on(dev);
-
-         /* Now we have to tell the syncppp that we had an outage
-          * and that it should deal.  Calling sppp_reopen here
-          * should do the trick, but we may have to call sppp_close
-          * when the link goes down, and call sppp_open here.
-          * Subject to more testing.
-          * --bbraun
-          */
-
-         lmc_proto_reopen(sc);
-
      }
 
     /* Call media specific watchdog functions */
@@ -816,114 +781,93 @@ kick_timer:
 
 }
 
-static void lmc_setup(struct net_device * const dev) /*fold00*/
+static int lmc_attach(struct net_device *dev, unsigned short encoding,
+		      unsigned short parity)
 {
-    lmc_trace(dev, "lmc_setup in");
-
-    dev->type = ARPHRD_HDLC;
-    dev->hard_start_xmit = lmc_start_xmit;
-    dev->open = lmc_open;
-    dev->stop = lmc_close;
-    dev->get_stats = lmc_get_stats;
-    dev->do_ioctl = lmc_ioctl;
-    dev->tx_timeout = lmc_driver_timeout;
-    dev->watchdog_timeo = (HZ); /* 1 second */
-    
-    lmc_trace(dev, "lmc_setup out");
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
 
-
 static int __devinit lmc_init_one(struct pci_dev *pdev,
 				  const struct pci_device_id *ent)
 {
-    struct net_device *dev;
-    lmc_softc_t *sc;
-    u16 subdevice;
-    u_int16_t AdapModelNum;
-    int err = -ENOMEM;
-    static int cards_found;
-#ifndef GCOM
-    /* We name by type not by vendor */
-    static const char lmcname[] = "hdlc%d";
-#else
-    /* 
-     * GCOM uses LMC vendor name so that clients can know which card
-     * to attach to.
-     */
-    static const char lmcname[] = "lmc%d";
-#endif
-
-
-    /*
-     * Allocate our own device structure
-     */
-    dev = alloc_netdev(sizeof(lmc_softc_t), lmcname, lmc_setup);
-    if (!dev) {
-        printk (KERN_ERR "lmc:alloc_netdev for device failed\n");
-	goto out1;
-    }
- 
-    lmc_trace(dev, "lmc_init_one in");
-
-    err = pci_enable_device(pdev);
-    if (err) {
-	    printk(KERN_ERR "lmc: pci enable failed:%d\n", err);
-	    goto out2;
-    }
-    
-    if (pci_request_regions(pdev, "lmc")) {
-	    printk(KERN_ERR "lmc: pci_request_region failed\n");
-	    err = -EIO;
-	    goto out3;
-    }
-
-    pci_set_drvdata(pdev, dev);
-
-    if(lmc_first_load == 0){
-        printk(KERN_INFO "Lan Media Corporation WAN Driver Version %d.%d.%d\n",
-	       DRIVER_MAJOR_VERSION, DRIVER_MINOR_VERSION,DRIVER_SUB_VERSION);
-        lmc_first_load = 1;
-    }
-    
-    sc = dev->priv;
-    sc->lmc_device = dev;
-    sc->name = dev->name;
-
-    /* Initialize the sppp layer */
-    /* An ioctl can cause a subsequent detach for raw frame interface */
-    dev->ml_priv = sc;
-    sc->if_type = LMC_PPP;
-    sc->check = 0xBEAFCAFE;
-    dev->base_addr = pci_resource_start(pdev, 0);
-    dev->irq = pdev->irq;
-
-    SET_NETDEV_DEV(dev, &pdev->dev);
-
-    /*
-     * This will get the protocol layer ready and do any 1 time init's
-     * Must have a valid sc and dev structure
-     */
-    lmc_proto_init(sc);
-
-    lmc_proto_attach(sc);
+	lmc_softc_t *sc;
+	struct net_device *dev;
+	u16 subdevice;
+	u16 AdapModelNum;
+	int err;
+	static int cards_found;
+
+	/* lmc_trace(dev, "lmc_init_one in"); */
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR "lmc: pci enable failed: %d\n", err);
+		return err;
+	}
 
-    /*
-     * Why were we changing this???
-     dev->tx_queue_len = 100;
-     */
+	err = pci_request_regions(pdev, "lmc");
+	if (err) {
+		printk(KERN_ERR "lmc: pci_request_region failed\n");
+		goto err_req_io;
+	}
 
-    /* Init the spin lock so can call it latter */
+	/*
+	 * Allocate our own device structure
+	 */
+	sc = kzalloc(sizeof(lmc_softc_t), GFP_KERNEL);
+	if (!sc) {
+		err = -ENOMEM;
+		goto err_kzalloc;
+	}
 
-    spin_lock_init(&sc->lmc_lock);
-    pci_set_master(pdev);
+	dev = alloc_hdlcdev(sc);
+	if (!dev) {
+		printk(KERN_ERR "lmc:alloc_netdev for device failed\n");
+		goto err_hdlcdev;
+	}
 
-    printk ("%s: detected at %lx, irq %d\n", dev->name,
-	    dev->base_addr, dev->irq);
 
-    if (register_netdev (dev) != 0) {
-        printk (KERN_ERR "%s: register_netdev failed.\n", dev->name);
-	goto out4;
-    }
+	dev->type = ARPHRD_HDLC;
+	dev_to_hdlc(dev)->xmit = lmc_start_xmit;
+	dev_to_hdlc(dev)->attach = lmc_attach;
+	dev->open = lmc_open;
+	dev->stop = lmc_close;
+	dev->get_stats = lmc_get_stats;
+	dev->do_ioctl = lmc_ioctl;
+	dev->tx_timeout = lmc_driver_timeout;
+	dev->watchdog_timeo = HZ; /* 1 second */
+	dev->tx_queue_len = 100;
+	sc->lmc_device = dev;
+	sc->name = dev->name;
+	sc->if_type = LMC_PPP;
+	sc->check = 0xBEAFCAFE;
+	dev->base_addr = pci_resource_start(pdev, 0);
+	dev->irq = pdev->irq;
+	pci_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	/*
+	 * This will get the protocol layer ready and do any 1 time init's
+	 * Must have a valid sc and dev structure
+	 */
+	lmc_proto_attach(sc);
+
+	/* Init the spin lock so can call it latter */
+
+	spin_lock_init(&sc->lmc_lock);
+	pci_set_master(pdev);
+
+	printk(KERN_INFO "%s: detected at %lx, irq %d\n", dev->name,
+	       dev->base_addr, dev->irq);
+
+	err = register_hdlc_device(dev);
+	if (err) {
+		printk(KERN_ERR "%s: register_netdev failed.\n", dev->name);
+		free_netdev(dev);
+		goto err_hdlcdev;
+	}
 
     sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN;
     sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
@@ -939,27 +883,27 @@ static int __devinit lmc_init_one(struct pci_dev *pdev,
 
     switch (subdevice) {
     case PCI_DEVICE_ID_LMC_HSSI:
-        printk ("%s: LMC HSSI\n", dev->name);
+	printk(KERN_INFO "%s: LMC HSSI\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_HSSI;
         sc->lmc_media = &lmc_hssi_media;
         break;
     case PCI_DEVICE_ID_LMC_DS3:
-        printk ("%s: LMC DS3\n", dev->name);
+	printk(KERN_INFO "%s: LMC DS3\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_DS3;
         sc->lmc_media = &lmc_ds3_media;
         break;
     case PCI_DEVICE_ID_LMC_SSI:
-        printk ("%s: LMC SSI\n", dev->name);
+	printk(KERN_INFO "%s: LMC SSI\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_SSI;
         sc->lmc_media = &lmc_ssi_media;
         break;
     case PCI_DEVICE_ID_LMC_T1:
-        printk ("%s: LMC T1\n", dev->name);
+	printk(KERN_INFO "%s: LMC T1\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_T1;
         sc->lmc_media = &lmc_t1_media;
         break;
     default:
-        printk (KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name);
+	printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name);
         break;
     }
 
@@ -977,32 +921,28 @@ static int __devinit lmc_init_one(struct pci_dev *pdev,
      */
     AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4;
 
-    if ((AdapModelNum == LMC_ADAP_T1
-         && subdevice == PCI_DEVICE_ID_LMC_T1) ||	/* detect LMC1200 */
-        (AdapModelNum == LMC_ADAP_SSI
-         && subdevice == PCI_DEVICE_ID_LMC_SSI) ||	/* detect LMC1000 */
-        (AdapModelNum == LMC_ADAP_DS3
-         && subdevice == PCI_DEVICE_ID_LMC_DS3) ||	/* detect LMC5245 */
-        (AdapModelNum == LMC_ADAP_HSSI
-         && subdevice == PCI_DEVICE_ID_LMC_HSSI))
-    {				/* detect LMC5200 */
+    if ((AdapModelNum != LMC_ADAP_T1 || /* detect LMC1200 */
+	 subdevice != PCI_DEVICE_ID_LMC_T1) &&
+	(AdapModelNum != LMC_ADAP_SSI || /* detect LMC1000 */
+	 subdevice != PCI_DEVICE_ID_LMC_SSI) &&
+	(AdapModelNum != LMC_ADAP_DS3 || /* detect LMC5245 */
+	 subdevice != PCI_DEVICE_ID_LMC_DS3) &&
+	(AdapModelNum != LMC_ADAP_HSSI || /* detect LMC5200 */
+	 subdevice != PCI_DEVICE_ID_LMC_HSSI))
+	    printk(KERN_WARNING "%s: Model number (%d) miscompare for PCI"
+		   " Subsystem ID = 0x%04x\n",
+		   dev->name, AdapModelNum, subdevice);
 
-    }
-    else {
-        printk ("%s: Model number (%d) miscompare for PCI Subsystem ID = 0x%04x\n",
-                dev->name, AdapModelNum, subdevice);
-//        return (NULL);
-    }
     /*
      * reset clock
      */
     LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL);
 
     sc->board_idx = cards_found++;
-    sc->stats.check = STATCHECK;
-    sc->stats.version_size = (DRIVER_VERSION << 16) +
-        sizeof (struct lmc_statistics);
-    sc->stats.lmc_cardtype = sc->lmc_cardtype;
+    sc->extra_stats.check = STATCHECK;
+    sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
+	    sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
+    sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
 
     sc->lmc_ok = 0;
     sc->last_link_status = 0;
@@ -1010,58 +950,51 @@ static int __devinit lmc_init_one(struct pci_dev *pdev,
     lmc_trace(dev, "lmc_init_one out");
     return 0;
 
- out4:
-    lmc_proto_detach(sc);
- out3:
-    if (pdev) {
-	    pci_release_regions(pdev);
-	    pci_set_drvdata(pdev, NULL);
-    }
- out2:
-    free_netdev(dev);
- out1:
-    return err;
+err_hdlcdev:
+	pci_set_drvdata(pdev, NULL);
+	kfree(sc);
+err_kzalloc:
+	pci_release_regions(pdev);
+err_req_io:
+	pci_disable_device(pdev);
+	return err;
 }
 
 /*
  * Called from pci when removing module.
  */
-static void __devexit lmc_remove_one (struct pci_dev *pdev)
+static void __devexit lmc_remove_one(struct pci_dev *pdev)
 {
-    struct net_device *dev = pci_get_drvdata(pdev);
-    
-    if (dev) {
-	    lmc_softc_t *sc = dev->priv;
-	    
-	    printk("%s: removing...\n", dev->name);
-	    lmc_proto_detach(sc);
-	    unregister_netdev(dev);
-	    free_netdev(dev);
-	    pci_release_regions(pdev);
-	    pci_disable_device(pdev);
-	    pci_set_drvdata(pdev, NULL);
-    }
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	if (dev) {
+		printk(KERN_DEBUG "%s: removing...\n", dev->name);
+		unregister_hdlc_device(dev);
+		free_netdev(dev);
+		pci_release_regions(pdev);
+		pci_disable_device(pdev);
+		pci_set_drvdata(pdev, NULL);
+	}
 }
 
 /* After this is called, packets can be sent.
  * Does not initialize the addresses
  */
-static int lmc_open (struct net_device *dev) /*fold00*/
+static int lmc_open(struct net_device *dev)
 {
-    lmc_softc_t *sc = dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
+    int err;
 
     lmc_trace(dev, "lmc_open in");
 
     lmc_led_on(sc, LMC_DS3_LED0);
 
-    lmc_dec_reset (sc);
-    lmc_reset (sc);
-
-    LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
-    LMC_EVENT_LOG(LMC_EVENT_RESET2,
-                  lmc_mii_readreg (sc, 0, 16),
-                  lmc_mii_readreg (sc, 0, 17));
+    lmc_dec_reset(sc);
+    lmc_reset(sc);
 
+    LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ(sc, csr_status), 0);
+    LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg(sc, 0, 16),
+		  lmc_mii_readreg(sc, 0, 17));
 
     if (sc->lmc_ok){
         lmc_trace(dev, "lmc_open lmc_ok out");
@@ -1106,14 +1039,14 @@ static int lmc_open (struct net_device *dev) /*fold00*/
 
     /* dev->flags |= IFF_UP; */
 
-    lmc_proto_open(sc);
+    if ((err = lmc_proto_open(sc)) != 0)
+	    return err;
 
     dev->do_ioctl = lmc_ioctl;
 
 
     netif_start_queue(dev);
-    
-    sc->stats.tx_tbusy0++ ;
+    sc->extra_stats.tx_tbusy0++;
 
     /*
      * select what interrupts we want to get
@@ -1165,8 +1098,7 @@ static int lmc_open (struct net_device *dev) /*fold00*/
 
 static void lmc_running_reset (struct net_device *dev) /*fold00*/
 {
-
-    lmc_softc_t *sc = (lmc_softc_t *) dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
 
     lmc_trace(dev, "lmc_runnig_reset in");
 
@@ -1184,7 +1116,7 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/
     netif_wake_queue(dev);
 
     sc->lmc_txfull = 0;
-    sc->stats.tx_tbusy0++ ;
+    sc->extra_stats.tx_tbusy0++;
 
     sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK;
     LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
@@ -1200,14 +1132,13 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/
  * This disables the timer for the watchdog and keepalives,
  * and disables the irq for dev.
  */
-static int lmc_close (struct net_device *dev) /*fold00*/
+static int lmc_close(struct net_device *dev)
 {
     /* not calling release_region() as we should */
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
 
     lmc_trace(dev, "lmc_close in");
-    
-    sc = dev->priv;
+
     sc->lmc_ok = 0;
     sc->lmc_media->set_link_status (sc, 0);
     del_timer (&sc->timer);
@@ -1215,7 +1146,7 @@ static int lmc_close (struct net_device *dev) /*fold00*/
     lmc_ifdown (dev);
 
     lmc_trace(dev, "lmc_close out");
-    
+
     return 0;
 }
 
@@ -1223,16 +1154,16 @@ static int lmc_close (struct net_device *dev) /*fold00*/
 /* When the interface goes down, this is called */
 static int lmc_ifdown (struct net_device *dev) /*fold00*/
 {
-    lmc_softc_t *sc = dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 csr6;
     int i;
 
     lmc_trace(dev, "lmc_ifdown in");
-    
+
     /* Don't let anything else go on right now */
     //    dev->start = 0;
     netif_stop_queue(dev);
-    sc->stats.tx_tbusy1++ ;
+    sc->extra_stats.tx_tbusy1++;
 
     /* stop interrupts */
     /* Clear the interrupt mask */
@@ -1244,8 +1175,8 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/
     csr6 &= ~LMC_DEC_SR;		/* Turn off the Receive bit */
     LMC_CSR_WRITE (sc, csr_command, csr6);
 
-    sc->stats.rx_missed_errors +=
-        LMC_CSR_READ (sc, csr_missed_frames) & 0xffff;
+    sc->lmc_device->stats.rx_missed_errors +=
+	    LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
 
     /* release the interrupt */
     if(sc->got_irq == 1){
@@ -1276,7 +1207,7 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/
     lmc_led_off (sc, LMC_MII16_LED_ALL);
 
     netif_wake_queue(dev);
-    sc->stats.tx_tbusy0++ ;
+    sc->extra_stats.tx_tbusy0++;
 
     lmc_trace(dev, "lmc_ifdown out");
 
@@ -1289,7 +1220,7 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/
 static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
 {
     struct net_device *dev = (struct net_device *) dev_instance;
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 csr;
     int i;
     s32 stat;
@@ -1300,8 +1231,6 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
 
     lmc_trace(dev, "lmc_interrupt in");
 
-    sc = dev->priv;
-    
     spin_lock(&sc->lmc_lock);
 
     /*
@@ -1354,7 +1283,7 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
 
 	    int		n_compl = 0 ;
             /* reset the transmit timeout detection flag -baz */
-            sc->stats.tx_NoCompleteCnt = 0;
+	    sc->extra_stats.tx_NoCompleteCnt = 0;
 
             badtx = sc->lmc_taint_tx;
             i = badtx % LMC_TXDESCS;
@@ -1378,27 +1307,25 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
                 if (sc->lmc_txq[i] == NULL)
                     continue;
 
-                /*
-                 * Check the total error summary to look for any errors
-                 */
-                if (stat & 0x8000) {
-                    sc->stats.tx_errors++;
-                    if (stat & 0x4104)
-                        sc->stats.tx_aborted_errors++;
-                    if (stat & 0x0C00)
-                        sc->stats.tx_carrier_errors++;
-                    if (stat & 0x0200)
-                        sc->stats.tx_window_errors++;
-                    if (stat & 0x0002)
-                        sc->stats.tx_fifo_errors++;
-                }
-                else {
-                    
-                    sc->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff;
-                    
-                    sc->stats.tx_packets++;
+		/*
+		 * Check the total error summary to look for any errors
+		 */
+		if (stat & 0x8000) {
+			sc->lmc_device->stats.tx_errors++;
+			if (stat & 0x4104)
+				sc->lmc_device->stats.tx_aborted_errors++;
+			if (stat & 0x0C00)
+				sc->lmc_device->stats.tx_carrier_errors++;
+			if (stat & 0x0200)
+				sc->lmc_device->stats.tx_window_errors++;
+			if (stat & 0x0002)
+				sc->lmc_device->stats.tx_fifo_errors++;
+		} else {
+			sc->lmc_device->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff;
+
+			sc->lmc_device->stats.tx_packets++;
                 }
-                
+
                 //                dev_kfree_skb(sc->lmc_txq[i]);
                 dev_kfree_skb_irq(sc->lmc_txq[i]);
                 sc->lmc_txq[i] = NULL;
@@ -1415,13 +1342,13 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
             LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0);
             sc->lmc_txfull = 0;
             netif_wake_queue(dev);
-            sc->stats.tx_tbusy0++ ;
+	    sc->extra_stats.tx_tbusy0++;
 
 
 #ifdef DEBUG
-            sc->stats.dirtyTx = badtx;
-            sc->stats.lmc_next_tx = sc->lmc_next_tx;
-            sc->stats.lmc_txfull = sc->lmc_txfull;
+	    sc->extra_stats.dirtyTx = badtx;
+	    sc->extra_stats.lmc_next_tx = sc->lmc_next_tx;
+	    sc->extra_stats.lmc_txfull = sc->lmc_txfull;
 #endif
             sc->lmc_taint_tx = badtx;
 
@@ -1476,9 +1403,9 @@ lmc_int_fail_out:
     return IRQ_RETVAL(handled);
 }
 
-static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00*/
+static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 flag;
     int entry;
     int ret = 0;
@@ -1486,8 +1413,6 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00
 
     lmc_trace(dev, "lmc_start_xmit in");
 
-    sc = dev->priv;
-
     spin_lock_irqsave(&sc->lmc_lock, flags);
 
     /* normal path, tbusy known to be zero */
@@ -1532,8 +1457,8 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00
     if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1)
     {				/* ring full, go busy */
         sc->lmc_txfull = 1;
-        netif_stop_queue(dev);
-        sc->stats.tx_tbusy1++ ;
+	netif_stop_queue(dev);
+	sc->extra_stats.tx_tbusy1++;
         LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0);
     }
 #endif
@@ -1550,7 +1475,7 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00
      * the watchdog timer handler. -baz
      */
 
-    sc->stats.tx_NoCompleteCnt++;
+    sc->extra_stats.tx_NoCompleteCnt++;
     sc->lmc_next_tx++;
 
     /* give ownership to the chip */
@@ -1569,9 +1494,9 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00
 }
 
 
-static int lmc_rx (struct net_device *dev) /*fold00*/
+static int lmc_rx(struct net_device *dev)
 {
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     int i;
     int rx_work_limit = LMC_RXDESCS;
     unsigned int next_rx;
@@ -1583,8 +1508,6 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
 
     lmc_trace(dev, "lmc_rx in");
 
-    sc = dev->priv;
-
     lmc_led_on(sc, LMC_DS3_LED3);
 
     rxIntLoopCnt = 0;		/* debug -baz */
@@ -1597,39 +1520,38 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
         rxIntLoopCnt++;		/* debug -baz */
         len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER);
         if ((stat & 0x0300) != 0x0300) {  /* Check first segment and last segment */
-            if ((stat & 0x0000ffff) != 0x7fff) {
-                /* Oversized frame */
-                sc->stats.rx_length_errors++;
-                goto skip_packet;
-            }
-        }
-
-        if(stat & 0x00000008){ /* Catch a dribbling bit error */
-            sc->stats.rx_errors++;
-            sc->stats.rx_frame_errors++;
-            goto skip_packet;
-        }
+		if ((stat & 0x0000ffff) != 0x7fff) {
+			/* Oversized frame */
+			sc->lmc_device->stats.rx_length_errors++;
+			goto skip_packet;
+		}
+	}
 
+	if (stat & 0x00000008) { /* Catch a dribbling bit error */
+		sc->lmc_device->stats.rx_errors++;
+		sc->lmc_device->stats.rx_frame_errors++;
+		goto skip_packet;
+	}
 
-        if(stat & 0x00000004){ /* Catch a CRC error by the Xilinx */
-            sc->stats.rx_errors++;
-            sc->stats.rx_crc_errors++;
-            goto skip_packet;
-        }
 
+	if (stat & 0x00000004) { /* Catch a CRC error by the Xilinx */
+		sc->lmc_device->stats.rx_errors++;
+		sc->lmc_device->stats.rx_crc_errors++;
+		goto skip_packet;
+	}
 
-        if (len > LMC_PKT_BUF_SZ){
-            sc->stats.rx_length_errors++;
-            localLengthErrCnt++;
-            goto skip_packet;
-        }
+	if (len > LMC_PKT_BUF_SZ) {
+		sc->lmc_device->stats.rx_length_errors++;
+		localLengthErrCnt++;
+		goto skip_packet;
+	}
 
-        if (len < sc->lmc_crcSize + 2) {
-            sc->stats.rx_length_errors++;
-            sc->stats.rx_SmallPktCnt++;
-            localLengthErrCnt++;
-            goto skip_packet;
-        }
+	if (len < sc->lmc_crcSize + 2) {
+		sc->lmc_device->stats.rx_length_errors++;
+		sc->extra_stats.rx_SmallPktCnt++;
+		localLengthErrCnt++;
+		goto skip_packet;
+	}
 
         if(stat & 0x00004000){
             printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name);
@@ -1656,8 +1578,8 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
         }
         
         dev->last_rx = jiffies;
-        sc->stats.rx_packets++;
-        sc->stats.rx_bytes += len;
+	sc->lmc_device->stats.rx_packets++;
+	sc->lmc_device->stats.rx_bytes += len;
 
         LMC_CONSOLE_LOG("recv", skb->data, len);
 
@@ -1679,7 +1601,6 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
 
             skb_put (skb, len);
             skb->protocol = lmc_proto_type(sc, skb);
-            skb->protocol = htons(ETH_P_WAN_PPP);
             skb_reset_mac_header(skb);
             /* skb_reset_network_header(skb); */
             skb->dev = dev;
@@ -1704,7 +1625,7 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
                  * in which care we'll try to allocate the buffer
                  * again.  (once a second)
                  */
-                sc->stats.rx_BuffAllocErr++;
+		sc->extra_stats.rx_BuffAllocErr++;
                 LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
                 sc->failed_recv_alloc = 1;
                 goto skip_out_of_mem;
@@ -1739,16 +1660,14 @@ static int lmc_rx (struct net_device *dev) /*fold00*/
      * descriptors with bogus packets
      *
     if (localLengthErrCnt > LMC_RXDESCS - 3) {
-        sc->stats.rx_BadPktSurgeCnt++;
-        LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE,
-                      localLengthErrCnt,
-                      sc->stats.rx_BadPktSurgeCnt);
+	sc->extra_stats.rx_BadPktSurgeCnt++;
+	LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, localLengthErrCnt,
+		      sc->extra_stats.rx_BadPktSurgeCnt);
     } */
 
     /* save max count of receive descriptors serviced */
-    if (rxIntLoopCnt > sc->stats.rxIntLoopCnt) {
-        sc->stats.rxIntLoopCnt = rxIntLoopCnt;	/* debug -baz */
-    }
+    if (rxIntLoopCnt > sc->extra_stats.rxIntLoopCnt)
+	    sc->extra_stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */
 
 #ifdef DEBUG
     if (rxIntLoopCnt == 0)
@@ -1775,23 +1694,22 @@ skip_out_of_mem:
     return 0;
 }
 
-static struct net_device_stats *lmc_get_stats (struct net_device *dev) /*fold00*/
+static struct net_device_stats *lmc_get_stats(struct net_device *dev)
 {
-    lmc_softc_t *sc = dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
     unsigned long flags;
 
     lmc_trace(dev, "lmc_get_stats in");
 
-
     spin_lock_irqsave(&sc->lmc_lock, flags);
 
-    sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff;
+    sc->lmc_device->stats.rx_missed_errors += LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
 
     spin_unlock_irqrestore(&sc->lmc_lock, flags);
 
     lmc_trace(dev, "lmc_get_stats out");
 
-    return (struct net_device_stats *) &sc->stats;
+    return &sc->lmc_device->stats;
 }
 
 static struct pci_driver lmc_driver = {
@@ -1970,7 +1888,7 @@ static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/
     {
         if (sc->lmc_txq[i] != NULL){		/* have buffer */
             dev_kfree_skb(sc->lmc_txq[i]);	/* free it */
-            sc->stats.tx_dropped++;      /* We just dropped a packet */
+	    sc->lmc_device->stats.tx_dropped++;	/* We just dropped a packet */
         }
         sc->lmc_txq[i] = NULL;
         sc->lmc_txring[i].status = 0x00000000;
@@ -1982,7 +1900,7 @@ static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/
     lmc_trace(sc->lmc_device, "lmc_softreset out");
 }
 
-void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
+void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_gpio_mkinput in");
     sc->lmc_gpio_io &= ~bits;
@@ -1990,7 +1908,7 @@ void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
     lmc_trace(sc->lmc_device, "lmc_gpio_mkinput out");
 }
 
-void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
+void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput in");
     sc->lmc_gpio_io |= bits;
@@ -1998,7 +1916,7 @@ void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
     lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput out");
 }
 
-void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/
+void lmc_led_on(lmc_softc_t * const sc, u32 led) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_led_on in");
     if((~sc->lmc_miireg16) & led){ /* Already on! */
@@ -2011,7 +1929,7 @@ void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/
     lmc_trace(sc->lmc_device, "lmc_led_on out");
 }
 
-void lmc_led_off(lmc_softc_t * const sc, u_int32_t led) /*fold00*/
+void lmc_led_off(lmc_softc_t * const sc, u32 led) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_led_off in");
     if(sc->lmc_miireg16 & led){ /* Already set don't do anything */
@@ -2061,13 +1979,13 @@ static void lmc_reset(lmc_softc_t * const sc) /*fold00*/
      */
     sc->lmc_media->init(sc);
 
-    sc->stats.resetCount++;
+    sc->extra_stats.resetCount++;
     lmc_trace(sc->lmc_device, "lmc_reset out");
 }
 
 static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/
 {
-    u_int32_t val;
+    u32 val;
     lmc_trace(sc->lmc_device, "lmc_dec_reset in");
 
     /*
@@ -2151,23 +2069,21 @@ static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, /*fold00
     lmc_trace(sc->lmc_device, "lmc_initcsrs out");
 }
 
-static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/
-    lmc_softc_t *sc;
+static void lmc_driver_timeout(struct net_device *dev)
+{
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 csr6;
     unsigned long flags;
 
     lmc_trace(dev, "lmc_driver_timeout in");
 
-    sc = dev->priv;
-
     spin_lock_irqsave(&sc->lmc_lock, flags);
 
     printk("%s: Xmitter busy|\n", dev->name);
 
-    sc->stats.tx_tbusy_calls++ ;
-    if (jiffies - dev->trans_start < TX_TIMEOUT) {
-        goto bug_out;
-    }
+    sc->extra_stats.tx_tbusy_calls++;
+    if (jiffies - dev->trans_start < TX_TIMEOUT)
+	    goto bug_out;
 
     /*
      * Chip seems to have locked up
@@ -2178,7 +2094,7 @@ static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/
 
     LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO,
                   LMC_CSR_READ (sc, csr_status),
-                  sc->stats.tx_ProcTimeout);
+		  sc->extra_stats.tx_ProcTimeout);
 
     lmc_running_reset (dev);
 
@@ -2195,8 +2111,8 @@ static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/
     /* immediate transmit */
     LMC_CSR_WRITE (sc, csr_txpoll, 0);
 
-    sc->stats.tx_errors++;
-    sc->stats.tx_ProcTimeout++;	/* -baz */
+    sc->lmc_device->stats.tx_errors++;
+    sc->extra_stats.tx_ProcTimeout++; /* -baz */
 
     dev->trans_start = jiffies;
 
diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c
index 8aa461c941c..f327674fc93 100644
--- a/drivers/net/wan/lmc/lmc_media.c
+++ b/drivers/net/wan/lmc/lmc_media.c
@@ -16,8 +16,6 @@
 #include <linux/inet.h>
 #include <linux/bitops.h>
 
-#include <net/syncppp.h>
-
 #include <asm/processor.h>             /* Processor type for cache alignment. */
 #include <asm/io.h>
 #include <asm/dma.h>
@@ -95,8 +93,7 @@ static void lmc_dummy_set_1 (lmc_softc_t * const, int);
 static void lmc_dummy_set2_1 (lmc_softc_t * const, lmc_ctl_t *);
 
 static inline void write_av9110_bit (lmc_softc_t *, int);
-static void write_av9110 (lmc_softc_t *, u_int32_t, u_int32_t, u_int32_t,
-			  u_int32_t, u_int32_t);
+static void write_av9110(lmc_softc_t *, u32, u32, u32, u32, u32);
 
 lmc_media_t lmc_ds3_media = {
   lmc_ds3_init,			/* special media init stuff */
@@ -427,7 +424,7 @@ lmc_ds3_set_scram (lmc_softc_t * const sc, int ie)
 static int
 lmc_ds3_get_link_status (lmc_softc_t * const sc)
 {
-    u_int16_t link_status, link_status_11;
+    u16 link_status, link_status_11;
     int ret = 1;
 
     lmc_mii_writereg (sc, 0, 17, 7);
@@ -449,7 +446,7 @@ lmc_ds3_get_link_status (lmc_softc_t * const sc)
         (link_status & LMC_FRAMER_REG0_OOFS)){
         ret = 0;
         if(sc->last_led_err[3] != 1){
-            u16 r1;
+	    u16 r1;
             lmc_mii_writereg (sc, 0, 17, 01); /* Turn on Xbit error as our cisco does */
             r1 = lmc_mii_readreg (sc, 0, 18);
             r1 &= 0xfe;
@@ -462,7 +459,7 @@ lmc_ds3_get_link_status (lmc_softc_t * const sc)
     else {
         lmc_led_off(sc, LMC_DS3_LED3);	/* turn on red LED */
         if(sc->last_led_err[3] == 1){
-            u16 r1;
+	    u16 r1;
             lmc_mii_writereg (sc, 0, 17, 01); /* Turn off Xbit error */
             r1 = lmc_mii_readreg (sc, 0, 18);
             r1 |= 0x01;
@@ -540,20 +537,19 @@ lmc_ds3_watchdog (lmc_softc_t * const sc)
  *  SSI methods
  */
 
-static void
-lmc_ssi_init (lmc_softc_t * const sc)
+static void lmc_ssi_init(lmc_softc_t * const sc)
 {
-  u_int16_t mii17;
-  int cable;
+	u16 mii17;
+	int cable;
 
-  sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000;
+	sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000;
 
-  mii17 = lmc_mii_readreg (sc, 0, 17);
+	mii17 = lmc_mii_readreg(sc, 0, 17);
 
-  cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT;
-  sc->ictl.cable_type = cable;
+	cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT;
+	sc->ictl.cable_type = cable;
 
-  lmc_gpio_mkoutput (sc, LMC_GEP_SSI_TXCLOCK);
+	lmc_gpio_mkoutput(sc, LMC_GEP_SSI_TXCLOCK);
 }
 
 static void
@@ -681,11 +677,11 @@ lmc_ssi_set_speed (lmc_softc_t * const sc, lmc_ctl_t * ctl)
 static int
 lmc_ssi_get_link_status (lmc_softc_t * const sc)
 {
-  u_int16_t link_status;
-  u_int32_t ticks;
+  u16 link_status;
+  u32 ticks;
   int ret = 1;
   int hw_hdsk = 1;
-  
+
   /*
    * missing CTS?  Hmm.  If we require CTS on, we may never get the
    * link to come up, so omit it in this test.
@@ -720,9 +716,9 @@ lmc_ssi_get_link_status (lmc_softc_t * const sc)
   }
   else if (ticks == 0 ) {				/* no clock found ? */
       ret = 0;
-      if(sc->last_led_err[3] != 1){
-          sc->stats.tx_lossOfClockCnt++;
-          printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name);
+      if (sc->last_led_err[3] != 1) {
+	      sc->extra_stats.tx_lossOfClockCnt++;
+	      printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name);
       }
       sc->last_led_err[3] = 1;
       lmc_led_on (sc, LMC_MII16_LED3);	/* turn ON red LED */
@@ -838,9 +834,7 @@ write_av9110_bit (lmc_softc_t * sc, int c)
   LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
 }
 
-static void
-write_av9110 (lmc_softc_t * sc, u_int32_t n, u_int32_t m, u_int32_t v,
-	      u_int32_t x, u_int32_t r)
+static void write_av9110(lmc_softc_t *sc, u32 n, u32 m, u32 v, u32 x, u32 r)
 {
   int i;
 
@@ -887,19 +881,13 @@ write_av9110 (lmc_softc_t * sc, u_int32_t n, u_int32_t m, u_int32_t v,
 		     | LMC_GEP_SSI_GENERATOR));
 }
 
-static void
-lmc_ssi_watchdog (lmc_softc_t * const sc)
+static void lmc_ssi_watchdog(lmc_softc_t * const sc)
 {
-  u_int16_t mii17 = lmc_mii_readreg (sc, 0, 17);
-  if (((mii17 >> 3) & 7) == 7)
-    {
-      lmc_led_off (sc, LMC_MII16_LED2);
-    }
-  else
-    {
-      lmc_led_on (sc, LMC_MII16_LED2);
-    }
-
+	u16 mii17 = lmc_mii_readreg(sc, 0, 17);
+	if (((mii17 >> 3) & 7) == 7)
+		lmc_led_off(sc, LMC_MII16_LED2);
+	else
+		lmc_led_on(sc, LMC_MII16_LED2);
 }
 
 /*
@@ -929,7 +917,7 @@ lmc_t1_read (lmc_softc_t * const sc, int a)
 static void
 lmc_t1_init (lmc_softc_t * const sc)
 {
-  u_int16_t mii16;
+  u16 mii16;
   int i;
 
   sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1200;
@@ -1028,7 +1016,7 @@ lmc_t1_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl)
  */ static int
 lmc_t1_get_link_status (lmc_softc_t * const sc)
 {
-    u_int16_t link_status;
+    u16 link_status;
     int ret = 1;
 
   /* LMC5245 (DS3) & LMC1200 (DS1) LED definitions
diff --git a/drivers/net/wan/lmc/lmc_proto.c b/drivers/net/wan/lmc/lmc_proto.c
index 85315758198..be9877ff551 100644
--- a/drivers/net/wan/lmc/lmc_proto.c
+++ b/drivers/net/wan/lmc/lmc_proto.c
@@ -36,9 +36,6 @@
 #include <linux/workqueue.h>
 #include <linux/proc_fs.h>
 #include <linux/bitops.h>
-
-#include <net/syncppp.h>
-
 #include <asm/processor.h>             /* Processor type for cache alignment. */
 #include <asm/io.h>
 #include <asm/dma.h>
@@ -50,48 +47,6 @@
 #include "lmc_ioctl.h"
 #include "lmc_proto.h"
 
-/*
- * The compile-time variable SPPPSTUP causes the module to be
- * compiled without referencing any of the sync ppp routines.
- */
-#ifdef SPPPSTUB
-#define SPPP_detach(d)	(void)0
-#define SPPP_open(d)	0
-#define SPPP_reopen(d)	(void)0
-#define SPPP_close(d)	(void)0
-#define SPPP_attach(d)	(void)0
-#define SPPP_do_ioctl(d,i,c)	-EOPNOTSUPP
-#else
-#define SPPP_attach(x)	sppp_attach((x)->pd)
-#define SPPP_detach(x)	sppp_detach((x)->pd->dev)
-#define SPPP_open(x)	sppp_open((x)->pd->dev)
-#define SPPP_reopen(x)	sppp_reopen((x)->pd->dev)
-#define SPPP_close(x)	sppp_close((x)->pd->dev)
-#define SPPP_do_ioctl(x, y, z)	sppp_do_ioctl((x)->pd->dev, (y), (z))
-#endif
-
-// init
-void lmc_proto_init(lmc_softc_t *sc) /*FOLD00*/
-{
-    lmc_trace(sc->lmc_device, "lmc_proto_init in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        sc->pd = kmalloc(sizeof(struct ppp_device), GFP_KERNEL);
-	if (!sc->pd) {
-		printk("lmc_proto_init(): kmalloc failure!\n");
-		return;
-	}
-        sc->pd->dev = sc->lmc_device;
-        sc->if_ptr = sc->pd;
-        break;
-    case LMC_RAW:
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_init out");
-}
-
 // attach
 void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
 {
@@ -100,7 +55,6 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
     case LMC_PPP:
         {
             struct net_device *dev = sc->lmc_device;
-            SPPP_attach(sc);
             dev->do_ioctl = lmc_ioctl;
         }
         break;
@@ -108,7 +62,7 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
         {
             struct net_device *dev = sc->lmc_device;
             /*
-             * They set a few basics because they don't use sync_ppp
+	     * They set a few basics because they don't use HDLC
              */
             dev->flags |= IFF_POINTOPOINT;
 
@@ -124,88 +78,39 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
     lmc_trace(sc->lmc_device, "lmc_proto_attach out");
 }
 
-// detach
-void lmc_proto_detach(lmc_softc_t *sc) /*FOLD00*/
+int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd)
 {
-    switch(sc->if_type){
-    case LMC_PPP:
-        SPPP_detach(sc);
-        break;
-    case LMC_RAW: /* Tell someone we're detaching? */
-        break;
-    default:
-        break;
-    }
-
+	lmc_trace(sc->lmc_device, "lmc_proto_ioctl");
+	if (sc->if_type == LMC_PPP)
+		return hdlc_ioctl(sc->lmc_device, ifr, cmd);
+	return -EOPNOTSUPP;
 }
 
-// reopen
-void lmc_proto_reopen(lmc_softc_t *sc) /*FOLD00*/
+int lmc_proto_open(lmc_softc_t *sc)
 {
-    lmc_trace(sc->lmc_device, "lmc_proto_reopen in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        SPPP_reopen(sc);
-        break;
-    case LMC_RAW: /* Reset the interface after being down, prerape to receive packets again */
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_reopen out");
-}
+	int ret = 0;
 
+	lmc_trace(sc->lmc_device, "lmc_proto_open in");
 
-// ioctl
-int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd) /*FOLD00*/
-{
-    lmc_trace(sc->lmc_device, "lmc_proto_ioctl out");
-    switch(sc->if_type){
-    case LMC_PPP:
-        return SPPP_do_ioctl (sc, ifr, cmd);
-        break;
-    default:
-        return -EOPNOTSUPP;
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_ioctl out");
+	if (sc->if_type == LMC_PPP) {
+		ret = hdlc_open(sc->lmc_device);
+		if (ret < 0)
+			printk(KERN_WARNING "%s: HDLC open failed: %d\n",
+			       sc->name, ret);
+	}
+
+	lmc_trace(sc->lmc_device, "lmc_proto_open out");
+	return ret;
 }
 
-// open
-void lmc_proto_open(lmc_softc_t *sc) /*FOLD00*/
+void lmc_proto_close(lmc_softc_t *sc)
 {
-    int ret;
+	lmc_trace(sc->lmc_device, "lmc_proto_close in");
 
-    lmc_trace(sc->lmc_device, "lmc_proto_open in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        ret = SPPP_open(sc);
-        if(ret < 0)
-            printk("%s: syncPPP open failed: %d\n", sc->name, ret);
-        break;
-    case LMC_RAW: /* We're about to start getting packets! */
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_open out");
-}
-
-// close
+	if (sc->if_type == LMC_PPP)
+		hdlc_close(sc->lmc_device);
 
-void lmc_proto_close(lmc_softc_t *sc) /*FOLD00*/
-{
-    lmc_trace(sc->lmc_device, "lmc_proto_close in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        SPPP_close(sc);
-        break;
-    case LMC_RAW: /* Interface going down */
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_close out");
+	lmc_trace(sc->lmc_device, "lmc_proto_close out");
 }
 
 __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
@@ -213,8 +118,8 @@ __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
     lmc_trace(sc->lmc_device, "lmc_proto_type in");
     switch(sc->if_type){
     case LMC_PPP:
-        return htons(ETH_P_WAN_PPP);
-        break;
+	    return hdlc_type_trans(skb, sc->lmc_device);
+	    break;
     case LMC_NET:
         return htons(ETH_P_802_2);
         break;
@@ -245,4 +150,3 @@ void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
     }
     lmc_trace(sc->lmc_device, "lmc_proto_netif out");
 }
-
diff --git a/drivers/net/wan/lmc/lmc_proto.h b/drivers/net/wan/lmc/lmc_proto.h
index ccaa69e8b3c..662148c5464 100644
--- a/drivers/net/wan/lmc/lmc_proto.h
+++ b/drivers/net/wan/lmc/lmc_proto.h
@@ -1,16 +1,18 @@
 #ifndef _LMC_PROTO_H_
 #define _LMC_PROTO_H_
 
-void lmc_proto_init(lmc_softc_t *sc);
+#include <linux/hdlc.h>
+
 void lmc_proto_attach(lmc_softc_t *sc);
-void lmc_proto_detach(lmc_softc_t *sc);
-void lmc_proto_reopen(lmc_softc_t *sc);
 int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd);
-void lmc_proto_open(lmc_softc_t *sc);
+int lmc_proto_open(lmc_softc_t *sc);
 void lmc_proto_close(lmc_softc_t *sc);
 __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb);
 void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb);
-int lmc_skb_rawpackets(char *buf, char **start, off_t offset, int len, int unused);
 
-#endif
+static inline lmc_softc_t* dev_to_sc(struct net_device *dev)
+{
+	return (lmc_softc_t *)dev_to_hdlc(dev)->priv;
+}
 
+#endif
diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h
index 6d003a39bfa..65d01978e78 100644
--- a/drivers/net/wan/lmc/lmc_var.h
+++ b/drivers/net/wan/lmc/lmc_var.h
@@ -1,8 +1,6 @@
 #ifndef _LMC_VAR_H_
 #define _LMC_VAR_H_
 
-/* $Id: lmc_var.h,v 1.17 2000/04/06 12:16:47 asj Exp $ */
-
  /*
   * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
   * All rights reserved.  www.lanmedia.com
@@ -19,23 +17,6 @@
 
 #include <linux/timer.h>
 
-#ifndef __KERNEL__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32 
-
-#endif
-
 /*
  * basic definitions used in lmc include files
  */
@@ -45,9 +26,6 @@ typedef struct lmc___media lmc_media_t;
 typedef struct lmc___ctl lmc_ctl_t;
 
 #define lmc_csrptr_t    unsigned long
-#define u_int16_t	u16
-#define u_int8_t	u8
-#define tulip_uint32_t	u32
 
 #define LMC_REG_RANGE 0x80
 
@@ -122,45 +100,45 @@ struct lmc_regfile_t {
  *  used to define bits in the second tulip_desc_t field (length)
  *  for the transmit descriptor -baz */
 
-#define LMC_TDES_FIRST_BUFFER_SIZE       ((u_int32_t)(0x000007FF))
-#define LMC_TDES_SECOND_BUFFER_SIZE      ((u_int32_t)(0x003FF800))
-#define LMC_TDES_HASH_FILTERING          ((u_int32_t)(0x00400000))
-#define LMC_TDES_DISABLE_PADDING         ((u_int32_t)(0x00800000))
-#define LMC_TDES_SECOND_ADDR_CHAINED     ((u_int32_t)(0x01000000))
-#define LMC_TDES_END_OF_RING             ((u_int32_t)(0x02000000))
-#define LMC_TDES_ADD_CRC_DISABLE         ((u_int32_t)(0x04000000))
-#define LMC_TDES_SETUP_PACKET            ((u_int32_t)(0x08000000))
-#define LMC_TDES_INVERSE_FILTERING       ((u_int32_t)(0x10000000))
-#define LMC_TDES_FIRST_SEGMENT           ((u_int32_t)(0x20000000))
-#define LMC_TDES_LAST_SEGMENT            ((u_int32_t)(0x40000000))
-#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u_int32_t)(0x80000000))
+#define LMC_TDES_FIRST_BUFFER_SIZE       ((u32)(0x000007FF))
+#define LMC_TDES_SECOND_BUFFER_SIZE      ((u32)(0x003FF800))
+#define LMC_TDES_HASH_FILTERING          ((u32)(0x00400000))
+#define LMC_TDES_DISABLE_PADDING         ((u32)(0x00800000))
+#define LMC_TDES_SECOND_ADDR_CHAINED     ((u32)(0x01000000))
+#define LMC_TDES_END_OF_RING             ((u32)(0x02000000))
+#define LMC_TDES_ADD_CRC_DISABLE         ((u32)(0x04000000))
+#define LMC_TDES_SETUP_PACKET            ((u32)(0x08000000))
+#define LMC_TDES_INVERSE_FILTERING       ((u32)(0x10000000))
+#define LMC_TDES_FIRST_SEGMENT           ((u32)(0x20000000))
+#define LMC_TDES_LAST_SEGMENT            ((u32)(0x40000000))
+#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u32)(0x80000000))
 
 #define TDES_SECOND_BUFFER_SIZE_BIT_NUMBER  11
 #define TDES_COLLISION_COUNT_BIT_NUMBER     3
 
 /* Constants for the RCV descriptor RDES */
 
-#define LMC_RDES_OVERFLOW             ((u_int32_t)(0x00000001))
-#define LMC_RDES_CRC_ERROR            ((u_int32_t)(0x00000002))
-#define LMC_RDES_DRIBBLING_BIT            ((u_int32_t)(0x00000004))
-#define LMC_RDES_REPORT_ON_MII_ERR    ((u_int32_t)(0x00000008))
-#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u_int32_t)(0x00000010))
-#define LMC_RDES_FRAME_TYPE           ((u_int32_t)(0x00000020))
-#define LMC_RDES_COLLISION_SEEN       ((u_int32_t)(0x00000040))
-#define LMC_RDES_FRAME_TOO_LONG       ((u_int32_t)(0x00000080))
-#define LMC_RDES_LAST_DESCRIPTOR      ((u_int32_t)(0x00000100))
-#define LMC_RDES_FIRST_DESCRIPTOR     ((u_int32_t)(0x00000200))
-#define LMC_RDES_MULTICAST_FRAME      ((u_int32_t)(0x00000400))
-#define LMC_RDES_RUNT_FRAME           ((u_int32_t)(0x00000800))
-#define LMC_RDES_DATA_TYPE            ((u_int32_t)(0x00003000))
-#define LMC_RDES_LENGTH_ERROR         ((u_int32_t)(0x00004000))
-#define LMC_RDES_ERROR_SUMMARY        ((u_int32_t)(0x00008000))
-#define LMC_RDES_FRAME_LENGTH         ((u_int32_t)(0x3FFF0000))
-#define LMC_RDES_OWN_BIT              ((u_int32_t)(0x80000000))
+#define LMC_RDES_OVERFLOW             ((u32)(0x00000001))
+#define LMC_RDES_CRC_ERROR            ((u32)(0x00000002))
+#define LMC_RDES_DRIBBLING_BIT        ((u32)(0x00000004))
+#define LMC_RDES_REPORT_ON_MII_ERR    ((u32)(0x00000008))
+#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u32)(0x00000010))
+#define LMC_RDES_FRAME_TYPE           ((u32)(0x00000020))
+#define LMC_RDES_COLLISION_SEEN       ((u32)(0x00000040))
+#define LMC_RDES_FRAME_TOO_LONG       ((u32)(0x00000080))
+#define LMC_RDES_LAST_DESCRIPTOR      ((u32)(0x00000100))
+#define LMC_RDES_FIRST_DESCRIPTOR     ((u32)(0x00000200))
+#define LMC_RDES_MULTICAST_FRAME      ((u32)(0x00000400))
+#define LMC_RDES_RUNT_FRAME           ((u32)(0x00000800))
+#define LMC_RDES_DATA_TYPE            ((u32)(0x00003000))
+#define LMC_RDES_LENGTH_ERROR         ((u32)(0x00004000))
+#define LMC_RDES_ERROR_SUMMARY        ((u32)(0x00008000))
+#define LMC_RDES_FRAME_LENGTH         ((u32)(0x3FFF0000))
+#define LMC_RDES_OWN_BIT              ((u32)(0x80000000))
 
 #define RDES_FRAME_LENGTH_BIT_NUMBER       16
 
-#define LMC_RDES_ERROR_MASK ( (u_int32_t)( \
+#define LMC_RDES_ERROR_MASK ( (u32)( \
 	  LMC_RDES_OVERFLOW \
 	| LMC_RDES_DRIBBLING_BIT \
 	| LMC_RDES_REPORT_ON_MII_ERR \
@@ -172,32 +150,32 @@ struct lmc_regfile_t {
  */
 
 typedef struct {
-	u_int32_t	n;
-	u_int32_t	m;
-	u_int32_t	v;
-	u_int32_t	x;
-	u_int32_t	r;
-	u_int32_t	f;
-	u_int32_t	exact;
+	u32	n;
+	u32	m;
+	u32	v;
+	u32	x;
+	u32	r;
+	u32	f;
+	u32	exact;
 } lmc_av9110_t;
 
 /*
  * Common structure passed to the ioctl code.
  */
 struct lmc___ctl {
-	u_int32_t	cardtype;
-	u_int32_t	clock_source;		/* HSSI, T1 */
-	u_int32_t	clock_rate;		/* T1 */
-	u_int32_t	crc_length;
-	u_int32_t	cable_length;		/* DS3 */
-	u_int32_t	scrambler_onoff;	/* DS3 */
-	u_int32_t	cable_type;		/* T1 */
-	u_int32_t	keepalive_onoff;	/* protocol */
-	u_int32_t	ticks;			/* ticks/sec */
+	u32	cardtype;
+	u32	clock_source;		/* HSSI, T1 */
+	u32	clock_rate;		/* T1 */
+	u32	crc_length;
+	u32	cable_length;		/* DS3 */
+	u32	scrambler_onoff;	/* DS3 */
+	u32	cable_type;		/* T1 */
+	u32	keepalive_onoff;	/* protocol */
+	u32	ticks;			/* ticks/sec */
 	union {
 		lmc_av9110_t	ssi;
 	} cardspec;
-	u_int32_t       circuit_type;   /* T1 or E1 */
+	u32       circuit_type;   /* T1 or E1 */
 };
 
 
@@ -244,108 +222,69 @@ struct lmc___media {
 
 #define STATCHECK     0xBEEFCAFE
 
-/*  Included in this structure are first
- *   - standard net_device_stats
- *   - some other counters used for debug and driver performance
- *  evaluation -baz
- */
-struct lmc_statistics
+struct lmc_extra_statistics
 {
-        unsigned long     rx_packets;             /* total packets received       */
-        unsigned long     tx_packets;             /* total packets transmitted    */
-	unsigned long     rx_bytes;
-        unsigned long     tx_bytes;
-        
-        unsigned long     rx_errors;              /* bad packets received         */
-        unsigned long     tx_errors;              /* packet transmit problems     */
-        unsigned long     rx_dropped;             /* no space in linux buffers    */
-        unsigned long     tx_dropped;             /* no space available in linux  */
-        unsigned long     multicast;              /* multicast packets received   */
-        unsigned long     collisions;
-
-        /* detailed rx_errors: */
-        unsigned long     rx_length_errors;
-        unsigned long     rx_over_errors;         /* receiver ring buff overflow  */
-        unsigned long     rx_crc_errors;          /* recved pkt with crc error    */
-        unsigned long     rx_frame_errors;        /* recv'd frame alignment error */
-        unsigned long     rx_fifo_errors;         /* recv'r fifo overrun          */
-        unsigned long     rx_missed_errors;       /* receiver missed packet       */
-
-        /* detailed tx_errors */
-        unsigned long     tx_aborted_errors;
-        unsigned long     tx_carrier_errors;
-        unsigned long     tx_fifo_errors;
-        unsigned long     tx_heartbeat_errors;
-        unsigned long     tx_window_errors;
-
-        /* for cslip etc */
-        unsigned long rx_compressed;
-        unsigned long tx_compressed;
-
-        /* -------------------------------------
-         * Custom stats & counters follow -baz */
-        u_int32_t       version_size;
-        u_int32_t       lmc_cardtype;
-
-        u_int32_t       tx_ProcTimeout;
-        u_int32_t       tx_IntTimeout;
-        u_int32_t       tx_NoCompleteCnt;
-        u_int32_t       tx_MaxXmtsB4Int;
-        u_int32_t       tx_TimeoutCnt;
-        u_int32_t       tx_OutOfSyncPtr;
-        u_int32_t       tx_tbusy0;
-        u_int32_t       tx_tbusy1;
-        u_int32_t       tx_tbusy_calls;
-        u_int32_t       resetCount;
-        u_int32_t       lmc_txfull;
-        u_int32_t       tbusy;
-        u_int32_t       dirtyTx;
-        u_int32_t       lmc_next_tx;
-        u_int32_t       otherTypeCnt;
-        u_int32_t       lastType;
-        u_int32_t       lastTypeOK;
-        u_int32_t       txLoopCnt;
-        u_int32_t       usedXmtDescripCnt;
-        u_int32_t       txIndexCnt;
-        u_int32_t       rxIntLoopCnt;
-
-        u_int32_t       rx_SmallPktCnt;
-        u_int32_t       rx_BadPktSurgeCnt;
-        u_int32_t       rx_BuffAllocErr;
-        u_int32_t       tx_lossOfClockCnt;
-
-        /* T1 error counters */
-        u_int32_t       framingBitErrorCount;
-        u_int32_t       lineCodeViolationCount;
-
-        u_int32_t       lossOfFrameCount;
-        u_int32_t       changeOfFrameAlignmentCount;
-        u_int32_t       severelyErroredFrameCount;
-
-        u_int32_t       check;
+	u32       version_size;
+	u32       lmc_cardtype;
+
+	u32       tx_ProcTimeout;
+	u32       tx_IntTimeout;
+	u32       tx_NoCompleteCnt;
+	u32       tx_MaxXmtsB4Int;
+	u32       tx_TimeoutCnt;
+	u32       tx_OutOfSyncPtr;
+	u32       tx_tbusy0;
+	u32       tx_tbusy1;
+	u32       tx_tbusy_calls;
+	u32       resetCount;
+	u32       lmc_txfull;
+	u32       tbusy;
+	u32       dirtyTx;
+	u32       lmc_next_tx;
+	u32       otherTypeCnt;
+	u32       lastType;
+	u32       lastTypeOK;
+	u32       txLoopCnt;
+	u32       usedXmtDescripCnt;
+	u32       txIndexCnt;
+	u32       rxIntLoopCnt;
+
+	u32       rx_SmallPktCnt;
+	u32       rx_BadPktSurgeCnt;
+	u32       rx_BuffAllocErr;
+	u32       tx_lossOfClockCnt;
+
+	/* T1 error counters */
+	u32       framingBitErrorCount;
+	u32       lineCodeViolationCount;
+
+	u32       lossOfFrameCount;
+	u32       changeOfFrameAlignmentCount;
+	u32       severelyErroredFrameCount;
+
+	u32       check;
 };
 
-
 typedef struct lmc_xinfo {
-        u_int32_t       Magic0;                         /* BEEFCAFE */
+	u32       Magic0;                         /* BEEFCAFE */
 
-        u_int32_t       PciCardType;
-        u_int32_t       PciSlotNumber;          /* PCI slot number       */
+	u32       PciCardType;
+	u32       PciSlotNumber;          /* PCI slot number       */
 
-        u_int16_t       DriverMajorVersion;
-        u_int16_t       DriverMinorVersion;
-        u_int16_t       DriverSubVersion;
+	u16	       DriverMajorVersion;
+	u16	       DriverMinorVersion;
+	u16	       DriverSubVersion;
 
-        u_int16_t       XilinxRevisionNumber;
-        u_int16_t       MaxFrameSize;
+	u16	       XilinxRevisionNumber;
+	u16	       MaxFrameSize;
 
-        u_int16_t       t1_alarm1_status;
-        u_int16_t       t1_alarm2_status;
+	u16     	  t1_alarm1_status;
+	u16       	t1_alarm2_status;
 
-        int                     link_status;
-        u_int32_t       mii_reg16;
+	int             link_status;
+	u32       mii_reg16;
 
-        u_int32_t       Magic1;                         /* DEADBEEF */
+	u32       Magic1;                         /* DEADBEEF */
 } LMC_XINFO;
 
 
@@ -353,23 +292,22 @@ typedef struct lmc_xinfo {
  * forward decl
  */
 struct lmc___softc {
-        void *if_ptr;   /* General purpose pointer (used by SPPP) */
 	char                   *name;
 	u8			board_idx;
-	struct lmc_statistics   stats;
-	struct net_device          *lmc_device;
+	struct lmc_extra_statistics extra_stats;
+	struct net_device      *lmc_device;
 
 	int                     hang, rxdesc, bad_packet, some_counter;
-	u_int32_t               txgo;
+	u32  	         	txgo;
 	struct lmc_regfile_t	lmc_csrs;
-	volatile u_int32_t	lmc_txtick;
-	volatile u_int32_t	lmc_rxtick;
-	u_int32_t		lmc_flags;
-	u_int32_t		lmc_intrmask;	/* our copy of csr_intr */
-	u_int32_t		lmc_cmdmode;	/* our copy of csr_cmdmode */
-	u_int32_t		lmc_busmode;	/* our copy of csr_busmode */
-	u_int32_t		lmc_gpio_io;	/* state of in/out settings */
-	u_int32_t		lmc_gpio;	/* state of outputs */
+	volatile u32		lmc_txtick;
+	volatile u32		lmc_rxtick;
+	u32			lmc_flags;
+	u32			lmc_intrmask;	/* our copy of csr_intr */
+	u32			lmc_cmdmode;	/* our copy of csr_cmdmode */
+	u32			lmc_busmode;	/* our copy of csr_busmode */
+	u32			lmc_gpio_io;	/* state of in/out settings */
+	u32			lmc_gpio;	/* state of outputs */
 	struct sk_buff*		lmc_txq[LMC_TXDESCS];
 	struct sk_buff*		lmc_rxq[LMC_RXDESCS];
 	volatile
@@ -381,42 +319,41 @@ struct lmc___softc {
 	unsigned int		lmc_taint_tx, lmc_taint_rx;
 	int			lmc_tx_start, lmc_txfull;
 	int			lmc_txbusy;
-	u_int16_t		lmc_miireg16;
+	u16			lmc_miireg16;
 	int			lmc_ok;
 	int			last_link_status;
 	int			lmc_cardtype;
-	u_int32_t               last_frameerr;
+	u32               	last_frameerr;
 	lmc_media_t	       *lmc_media;
 	struct timer_list	timer;
 	lmc_ctl_t		ictl;
-	u_int32_t		TxDescriptControlInit;  
+	u32			TxDescriptControlInit;
 
 	int                     tx_TimeoutInd; /* additional driver state */
 	int                     tx_TimeoutDisplay;
 	unsigned int		lastlmc_taint_tx;
 	int                     lasttx_packets;
-	u_int32_t		tx_clockState;
-	u_int32_t		lmc_crcSize;
-	LMC_XINFO		lmc_xinfo; 
+	u32			tx_clockState;
+	u32			lmc_crcSize;
+	LMC_XINFO		lmc_xinfo;
 	char                    lmc_yel, lmc_blue, lmc_red; /* for T1 and DS3 */
-        char                    lmc_timing; /* for HSSI and SSI */
-        int                     got_irq;
+	char                    lmc_timing; /* for HSSI and SSI */
+	int                     got_irq;
 
-        char                    last_led_err[4];
+	char                    last_led_err[4];
 
-        u32                     last_int;
-        u32                     num_int;
+	u32                     last_int;
+	u32                     num_int;
 
 	spinlock_t              lmc_lock;
-        u_int16_t               if_type;       /* PPP or NET */
-        struct ppp_device       *pd;
+	u16			if_type;       /* HDLC/PPP or NET */
 
-        /* Failure cases */
-        u8                       failed_ring;
-        u8                       failed_recv_alloc;
+	/* Failure cases */
+	u8			failed_ring;
+	u8			failed_recv_alloc;
 
-        /* Structure check */
-        u32                     check;
+	/* Structure check */
+	u32                     check;
 };
 
 #define LMC_PCI_TIME 1
@@ -512,8 +449,8 @@ struct lmc___softc {
   | TULIP_STS_TXUNDERFLOW\
   | TULIP_STS_RXSTOPPED )
 
-#define DESC_OWNED_BY_SYSTEM   ((u_int32_t)(0x00000000))
-#define DESC_OWNED_BY_DC21X4   ((u_int32_t)(0x80000000))
+#define DESC_OWNED_BY_SYSTEM   ((u32)(0x00000000))
+#define DESC_OWNED_BY_DC21X4   ((u32)(0x80000000))
 
 #ifndef TULIP_CMD_RECEIVEALL
 #define TULIP_CMD_RECEIVEALL 0x40000000L
@@ -525,46 +462,9 @@ struct lmc___softc {
 #define LMC_ADAP_SSI            4
 #define LMC_ADAP_T1             5
 
-#define HDLC_HDR_LEN  4
-#define HDLC_ADDR_LEN 1
-#define HDLC_SLARP    0x8035
 #define LMC_MTU 1500
-#define SLARP_LINECHECK 2
 
 #define LMC_CRC_LEN_16 2  /* 16-bit CRC */
 #define LMC_CRC_LEN_32 4
 
-#ifdef LMC_HDLC
-/* definition of an hdlc header. */
-struct hdlc_hdr
-{
-	u8  address;
-	u8  control;
-	u16 type;
-};
-
-/* definition of a slarp header. */
-struct slarp
-{
-	long code;
-	union sl
-	{
-		struct
-		{
-			ulong address;
-			ulong mask;
-			ushort unused;
-		} add;
-		struct
-		{
-			ulong mysequence;
-			ulong yoursequence;
-			ushort reliability;
-			ulong time;
-		} chk;
-	} t;
-};
-#endif /* LMC_HDLC */
-
-
 #endif /* _LMC_VAR_H_ */
diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h
index 63e9fcf31fb..2e4f84f6cad 100644
--- a/drivers/net/wan/pc300.h
+++ b/drivers/net/wan/pc300.h
@@ -100,31 +100,14 @@
 #define	_PC300_H
 
 #include <linux/hdlc.h>
-#include <net/syncppp.h>
 #include "hd64572.h"
 #include "pc300-falc-lh.h"
 
-#ifndef CY_TYPES
-#define CY_TYPES
-typedef	__u64	ucdouble;	/* 64 bits, unsigned */
-typedef	__u32	uclong;		/* 32 bits, unsigned */
-typedef	__u16	ucshort;	/* 16 bits, unsigned */
-typedef	__u8	ucchar;		/* 8 bits, unsigned */
-#endif /* CY_TYPES */
+#define PC300_PROTO_MLPPP 1
 
-#define PC300_PROTO_MLPPP 1		
-
-#define PC300_KERNEL	"2.4.x"	/* Kernel supported by this driver */
-
-#define	PC300_DEVNAME	"hdlc"	/* Dev. name base (for hdlc0, hdlc1, etc.) */
-#define PC300_MAXINDEX	100	/* Max dev. name index (the '0' in hdlc0) */
-
-#define	PC300_MAXCARDS	4	/* Max number of cards per system */
 #define	PC300_MAXCHAN	2	/* Number of channels per card */
 
-#define	PC300_PLX_WIN	0x80    /* PLX control window size (128b) */
 #define	PC300_RAMSIZE	0x40000 /* RAM window size (256Kb) */
-#define	PC300_SCASIZE	0x400   /* SCA window size (1Kb) */
 #define	PC300_FALCSIZE	0x400	/* FALC window size (1Kb) */
 
 #define PC300_OSC_CLOCK	24576000
@@ -160,26 +143,14 @@ typedef	__u8	ucchar;		/* 8 bits, unsigned */
  * Memory access functions/macros      *
  * (required to support Alpha systems) *
  ***************************************/
-#ifdef __KERNEL__
-#define cpc_writeb(port,val)	{writeb((ucchar)(val),(port)); mb();}
+#define cpc_writeb(port,val)	{writeb((u8)(val),(port)); mb();}
 #define cpc_writew(port,val)	{writew((ushort)(val),(port)); mb();}
-#define cpc_writel(port,val)	{writel((uclong)(val),(port)); mb();}
+#define cpc_writel(port,val)	{writel((u32)(val),(port)); mb();}
 
 #define cpc_readb(port)		readb(port)
 #define cpc_readw(port)		readw(port)
 #define cpc_readl(port)		readl(port)
 
-#else /* __KERNEL__ */
-#define cpc_writeb(port,val)	(*(volatile ucchar *)(port) = (ucchar)(val))
-#define cpc_writew(port,val)	(*(volatile ucshort *)(port) = (ucshort)(val))
-#define cpc_writel(port,val)	(*(volatile uclong *)(port) = (uclong)(val))
-
-#define cpc_readb(port)		(*(volatile ucchar *)(port))
-#define cpc_readw(port)		(*(volatile ucshort *)(port))
-#define cpc_readl(port)		(*(volatile uclong *)(port))
-
-#endif /* __KERNEL__ */
-
 /****** Data Structures *****************************************************/
 
 /*
@@ -188,15 +159,15 @@ typedef	__u8	ucchar;		/* 8 bits, unsigned */
  *      (memory mapped).
  */
 struct RUNTIME_9050 {
-	uclong	loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
-	uclong	loc_rom_range;		/* 10h : Local ROM Range */
-	uclong	loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
-	uclong	loc_rom_base;		/* 24h : Local ROM Base */
-	uclong	loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
-	uclong	rom_bus_descr;		/* 38h : ROM Bus Descriptor */
-	uclong	cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
-	uclong	intr_ctrl_stat;		/* 4Ch : Interrupt Control/Status */
-	uclong	init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
+	u32 loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
+	u32 loc_rom_range;	/* 10h : Local ROM Range */
+	u32 loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
+	u32 loc_rom_base;	/* 24h : Local ROM Base */
+	u32 loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
+	u32 rom_bus_descr;	/* 38h : ROM Bus Descriptor */
+	u32 cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
+	u32 intr_ctrl_stat;	/* 4Ch : Interrupt Control/Status */
+	u32 init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
 };
 
 #define PLX_9050_LINT1_ENABLE	0x01
@@ -240,66 +211,66 @@ struct RUNTIME_9050 {
 #define PC300_FALC_MAXLOOP	0x0000ffff	/* for falc_issue_cmd() */
 
 typedef struct falc {
-	ucchar sync;		/* If true FALC is synchronized */
-	ucchar active;		/* if TRUE then already active */
-	ucchar loop_active;	/* if TRUE a line loopback UP was received */
-	ucchar loop_gen;	/* if TRUE a line loopback UP was issued */
+	u8 sync;	/* If true FALC is synchronized */
+	u8 active;	/* if TRUE then already active */
+	u8 loop_active;	/* if TRUE a line loopback UP was received */
+	u8 loop_gen;	/* if TRUE a line loopback UP was issued */
 
-	ucchar num_channels;
-	ucchar offset;		/* 1 for T1, 0 for E1 */
-	ucchar full_bandwidth;
+	u8 num_channels;
+	u8 offset;	/* 1 for T1, 0 for E1 */
+	u8 full_bandwidth;
 
-	ucchar xmb_cause;
-	ucchar multiframe_mode;
+	u8 xmb_cause;
+	u8 multiframe_mode;
 
 	/* Statistics */
-	ucshort pden;	/* Pulse Density violation count */
-	ucshort los;	/* Loss of Signal count */
-	ucshort losr;	/* Loss of Signal recovery count */
-	ucshort lfa;	/* Loss of frame alignment count */
-	ucshort farec;	/* Frame Alignment Recovery count */
-	ucshort lmfa;	/* Loss of multiframe alignment count */
-	ucshort ais;	/* Remote Alarm indication Signal count */
-	ucshort sec;	/* One-second timer */
-	ucshort es;	/* Errored second */
-	ucshort rai;	/* remote alarm received */
-	ucshort bec;
-	ucshort fec;
-	ucshort cvc;
-	ucshort cec;
-	ucshort ebc;
+	u16 pden;	/* Pulse Density violation count */
+	u16 los;	/* Loss of Signal count */
+	u16 losr;	/* Loss of Signal recovery count */
+	u16 lfa;	/* Loss of frame alignment count */
+	u16 farec;	/* Frame Alignment Recovery count */
+	u16 lmfa;	/* Loss of multiframe alignment count */
+	u16 ais;	/* Remote Alarm indication Signal count */
+	u16 sec;	/* One-second timer */
+	u16 es;		/* Errored second */
+	u16 rai;	/* remote alarm received */
+	u16 bec;
+	u16 fec;
+	u16 cvc;
+	u16 cec;
+	u16 ebc;
 
 	/* Status */
-	ucchar red_alarm;
-	ucchar blue_alarm;
-	ucchar loss_fa;
-	ucchar yellow_alarm;
-	ucchar loss_mfa;
-	ucchar prbs;
+	u8 red_alarm;
+	u8 blue_alarm;
+	u8 loss_fa;
+	u8 yellow_alarm;
+	u8 loss_mfa;
+	u8 prbs;
 } falc_t;
 
 typedef struct falc_status {
-	ucchar sync;  /* If true FALC is synchronized */
-	ucchar red_alarm;
-	ucchar blue_alarm;
-	ucchar loss_fa;
-	ucchar yellow_alarm;
-	ucchar loss_mfa;
-	ucchar prbs;
+	u8 sync;	/* If true FALC is synchronized */
+	u8 red_alarm;
+	u8 blue_alarm;
+	u8 loss_fa;
+	u8 yellow_alarm;
+	u8 loss_mfa;
+	u8 prbs;
 } falc_status_t;
 
 typedef struct rsv_x21_status {
-	ucchar dcd;
-	ucchar dsr;
-	ucchar cts;
-	ucchar rts;
-	ucchar dtr;
+	u8 dcd;
+	u8 dsr;
+	u8 cts;
+	u8 rts;
+	u8 dtr;
 } rsv_x21_status_t;
 
 typedef struct pc300stats {
 	int hw_type;
-	uclong line_on;
-	uclong line_off;
+	u32 line_on;
+	u32 line_off;
 	struct net_device_stats gen_stats;
 	falc_t te_stats;
 } pc300stats_t;
@@ -317,28 +288,19 @@ typedef struct pc300loopback {
 
 typedef struct pc300patterntst {
 	char patrntst_on;       /* 0 - off; 1 - on; 2 - read num_errors */
-	ucshort num_errors;
+	u16 num_errors;
 } pc300patterntst_t;
 
 typedef struct pc300dev {
-	void *if_ptr;		/* General purpose pointer */
 	struct pc300ch *chan;
-	ucchar trace_on;
-	uclong line_on;		/* DCD(X.21, RSV) / sync(TE) change counters */
-	uclong line_off;
-#ifdef __KERNEL__
+	u8 trace_on;
+	u32 line_on;		/* DCD(X.21, RSV) / sync(TE) change counters */
+	u32 line_off;
 	char name[16];
 	struct net_device *dev;
-
-	void *private;
-	struct sk_buff *tx_skb;
-	union {	/* This union has all the protocol-specific structures */
-		struct ppp_device pppdev;
-	}ifu;
 #ifdef CONFIG_PC300_MLPPP
 	void *cpc_tty;	/* information to PC300 TTY driver */
 #endif
-#endif /* __KERNEL__ */
 }pc300dev_t;
 
 typedef struct pc300hw {
@@ -346,43 +308,42 @@ typedef struct pc300hw {
 	int bus;		/* Bus (PCI, PMC, etc.) */
 	int nchan;		/* number of channels */
 	int irq;		/* interrupt request level */
-	uclong clock;		/* Board clock */
-	ucchar cpld_id;		/* CPLD ID (TE only) */
-	ucshort cpld_reg1;	/* CPLD reg 1 (TE only) */
-	ucshort cpld_reg2;	/* CPLD reg 2 (TE only) */
-	ucshort gpioc_reg;	/* PLX GPIOC reg */
-	ucshort intctl_reg;	/* PLX Int Ctrl/Status reg */
-	uclong iophys;		/* PLX registers I/O base */
-	uclong iosize;		/* PLX registers I/O size */
-	uclong plxphys;		/* PLX registers MMIO base (physical) */
+	u32 clock;		/* Board clock */
+	u8 cpld_id;		/* CPLD ID (TE only) */
+	u16 cpld_reg1;		/* CPLD reg 1 (TE only) */
+	u16 cpld_reg2;		/* CPLD reg 2 (TE only) */
+	u16 gpioc_reg;		/* PLX GPIOC reg */
+	u16 intctl_reg;		/* PLX Int Ctrl/Status reg */
+	u32 iophys;		/* PLX registers I/O base */
+	u32 iosize;		/* PLX registers I/O size */
+	u32 plxphys;		/* PLX registers MMIO base (physical) */
 	void __iomem * plxbase;	/* PLX registers MMIO base (virtual) */
-	uclong plxsize;		/* PLX registers MMIO size */
-	uclong scaphys;		/* SCA registers MMIO base (physical) */
+	u32 plxsize;		/* PLX registers MMIO size */
+	u32 scaphys;		/* SCA registers MMIO base (physical) */
 	void __iomem * scabase;	/* SCA registers MMIO base (virtual) */
-	uclong scasize;		/* SCA registers MMIO size */
-	uclong ramphys;		/* On-board RAM MMIO base (physical) */
+	u32 scasize;		/* SCA registers MMIO size */
+	u32 ramphys;		/* On-board RAM MMIO base (physical) */
 	void __iomem * rambase;	/* On-board RAM MMIO base (virtual) */
-	uclong alloc_ramsize;	/* RAM MMIO size allocated by the PCI bridge */
-	uclong ramsize;		/* On-board RAM MMIO size */
-	uclong falcphys;	/* FALC registers MMIO base (physical) */
+	u32 alloc_ramsize;	/* RAM MMIO size allocated by the PCI bridge */
+	u32 ramsize;		/* On-board RAM MMIO size */
+	u32 falcphys;		/* FALC registers MMIO base (physical) */
 	void __iomem * falcbase;/* FALC registers MMIO base (virtual) */
-	uclong falcsize;	/* FALC registers MMIO size */
+	u32 falcsize;		/* FALC registers MMIO size */
 } pc300hw_t;
 
 typedef struct pc300chconf {
-	sync_serial_settings	phys_settings;	/* Clock type/rate (in bps), 
+	sync_serial_settings	phys_settings;	/* Clock type/rate (in bps),
 						   loopback mode */
 	raw_hdlc_proto		proto_settings;	/* Encoding, parity (CRC) */
-	uclong media;		/* HW media (RS232, V.35, etc.) */
-	uclong proto;		/* Protocol (PPP, X.25, etc.) */
-	ucchar monitor;		/* Monitor mode (0 = off, !0 = on) */
+	u32 media;		/* HW media (RS232, V.35, etc.) */
+	u32 proto;		/* Protocol (PPP, X.25, etc.) */
 
 	/* TE-specific parameters */
-	ucchar lcode;		/* Line Code (AMI, B8ZS, etc.) */
-	ucchar fr_mode;		/* Frame Mode (ESF, D4, etc.) */
-	ucchar lbo;		/* Line Build Out */
-	ucchar rx_sens;		/* Rx Sensitivity (long- or short-haul) */
-	uclong tslot_bitmap;	/* bit[i]=1  =>  timeslot _i_ is active */
+	u8 lcode;		/* Line Code (AMI, B8ZS, etc.) */
+	u8 fr_mode;		/* Frame Mode (ESF, D4, etc.) */
+	u8 lbo;			/* Line Build Out */
+	u8 rx_sens;		/* Rx Sensitivity (long- or short-haul) */
+	u32 tslot_bitmap;	/* bit[i]=1  =>  timeslot _i_ is active */
 } pc300chconf_t;
 
 typedef struct pc300ch {
@@ -390,20 +351,18 @@ typedef struct pc300ch {
 	int channel;
 	pc300dev_t d;
 	pc300chconf_t conf;
-	ucchar tx_first_bd;	/* First TX DMA block descr. w/ data */
-	ucchar tx_next_bd;	/* Next free TX DMA block descriptor */
-	ucchar rx_first_bd;	/* First free RX DMA block descriptor */
-	ucchar rx_last_bd;	/* Last free RX DMA block descriptor */
-	ucchar nfree_tx_bd;	/* Number of free TX DMA block descriptors */
-	falc_t falc;		/* FALC structure (TE only) */
+	u8 tx_first_bd;	/* First TX DMA block descr. w/ data */
+	u8 tx_next_bd;	/* Next free TX DMA block descriptor */
+	u8 rx_first_bd;	/* First free RX DMA block descriptor */
+	u8 rx_last_bd;	/* Last free RX DMA block descriptor */
+	u8 nfree_tx_bd;	/* Number of free TX DMA block descriptors */
+	falc_t falc;	/* FALC structure (TE only) */
 } pc300ch_t;
 
 typedef struct pc300 {
 	pc300hw_t hw;			/* hardware config. */
 	pc300ch_t chan[PC300_MAXCHAN];
-#ifdef __KERNEL__
 	spinlock_t card_lock;
-#endif /* __KERNEL__ */
 } pc300_t;
 
 typedef struct pc300conf {
@@ -471,12 +430,7 @@ enum pc300_loopback_cmds {
 #define PC300_TX_QUEUE_LEN	100
 #define	PC300_DEF_MTU		1600
 
-#ifdef __KERNEL__
 /* Function Prototypes */
-void tx_dma_start(pc300_t *, int);
 int cpc_open(struct net_device *dev);
-int cpc_set_media(hdlc_device *, int);
-#endif /* __KERNEL__ */
 
 #endif	/* _PC300_H */
-
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 33417052775..d0a8d1e352a 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -227,8 +227,6 @@ static char rcsid[] =
 #include <linux/netdevice.h>
 #include <linux/spinlock.h>
 #include <linux/if.h>
-
-#include <net/syncppp.h>
 #include <net/arp.h>
 
 #include <asm/io.h>
@@ -285,8 +283,8 @@ static void rx_dma_buf_init(pc300_t *, int);
 static void tx_dma_buf_check(pc300_t *, int);
 static void rx_dma_buf_check(pc300_t *, int);
 static irqreturn_t cpc_intr(int, void *);
-static int clock_rate_calc(uclong, uclong, int *);
-static uclong detect_ram(pc300_t *);
+static int clock_rate_calc(u32, u32, int *);
+static u32 detect_ram(pc300_t *);
 static void plx_init(pc300_t *);
 static void cpc_trace(struct net_device *, struct sk_buff *, char);
 static int cpc_attach(struct net_device *, unsigned short, unsigned short);
@@ -311,10 +309,10 @@ static void tx_dma_buf_pt_init(pc300_t * card, int ch)
 			               + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 
 	for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) {
-		cpc_writel(&ptdescr->next, (uclong) (DMA_TX_BD_BASE +
+		cpc_writel(&ptdescr->next, (u32)(DMA_TX_BD_BASE +
 			(ch_factor + ((i + 1) & (N_DMA_TX_BUF - 1))) * sizeof(pcsca_bd_t)));
-		cpc_writel(&ptdescr->ptbuf, 
-						(uclong) (DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN));
+		cpc_writel(&ptdescr->ptbuf,
+			   (u32)(DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN));
 	}
 }
 
@@ -341,10 +339,10 @@ static void rx_dma_buf_pt_init(pc300_t * card, int ch)
 				       + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 
 	for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) {
-		cpc_writel(&ptdescr->next, (uclong) (DMA_RX_BD_BASE +
-	     	(ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t)));
+		cpc_writel(&ptdescr->next, (u32)(DMA_RX_BD_BASE +
+			(ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t)));
 		cpc_writel(&ptdescr->ptbuf,
-			   (uclong) (DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN));
+			   (u32)(DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN));
 	}
 }
 
@@ -367,8 +365,8 @@ static void tx_dma_buf_check(pc300_t * card, int ch)
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int i;
-	ucshort first_bd = card->chan[ch].tx_first_bd;
-	ucshort next_bd = card->chan[ch].tx_next_bd;
+	u16 first_bd = card->chan[ch].tx_first_bd;
+	u16 next_bd = card->chan[ch].tx_next_bd;
 
 	printk("#CH%d: f_bd = %d(0x%08zx), n_bd = %d(0x%08zx)\n", ch,
 	       first_bd, TX_BD_ADDR(ch, first_bd),
@@ -392,9 +390,9 @@ static void tx1_dma_buf_check(pc300_t * card, int ch)
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int i;
-	ucshort first_bd = card->chan[ch].tx_first_bd;
-	ucshort next_bd = card->chan[ch].tx_next_bd;
-	uclong scabase = card->hw.scabase;
+	u16 first_bd = card->chan[ch].tx_first_bd;
+	u16 next_bd = card->chan[ch].tx_next_bd;
+	u32 scabase = card->hw.scabase;
 
 	printk ("\nnfree_tx_bd = %d \n", card->chan[ch].nfree_tx_bd);
 	printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch,
@@ -413,13 +411,13 @@ static void tx1_dma_buf_check(pc300_t * card, int ch)
 	printk("\n");
 }
 #endif
-			 
+
 static void rx_dma_buf_check(pc300_t * card, int ch)
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int i;
-	ucshort first_bd = card->chan[ch].rx_first_bd;
-	ucshort last_bd = card->chan[ch].rx_last_bd;
+	u16 first_bd = card->chan[ch].rx_first_bd;
+	u16 last_bd = card->chan[ch].rx_last_bd;
 	int ch_factor;
 
 	ch_factor = ch * N_DMA_RX_BUF;
@@ -440,9 +438,9 @@ static void rx_dma_buf_check(pc300_t * card, int ch)
 static int dma_get_rx_frame_size(pc300_t * card, int ch)
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
-	ucshort first_bd = card->chan[ch].rx_first_bd;
+	u16 first_bd = card->chan[ch].rx_first_bd;
 	int rcvd = 0;
-	volatile ucchar status;
+	volatile u8 status;
 
 	ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, first_bd));
 	while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) {
@@ -462,12 +460,12 @@ static int dma_get_rx_frame_size(pc300_t * card, int ch)
  * dma_buf_write: writes a frame to the Tx DMA buffers
  * NOTE: this function writes one frame at a time.
  */
-static int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len)
+static int dma_buf_write(pc300_t *card, int ch, u8 *ptdata, int len)
 {
 	int i, nchar;
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int tosend = len;
-	ucchar nbuf = ((len - 1) / BD_DEF_LEN) + 1;
+	u8 nbuf = ((len - 1) / BD_DEF_LEN) + 1;
 
 	if (nbuf >= card->chan[ch].nfree_tx_bd) {
 		return -ENOMEM;
@@ -509,7 +507,7 @@ static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb)
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int rcvd = 0;
-	volatile ucchar status;
+	volatile u8 status;
 
 	ptdescr = (card->hw.rambase +
 				  RX_BD_ADDR(ch, chan->rx_first_bd));
@@ -563,8 +561,8 @@ static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb)
 static void tx_dma_stop(pc300_t * card, int ch)
 {
 	void __iomem *scabase = card->hw.scabase;
-	ucchar drr_ena_bit = 1 << (5 + 2 * ch);
-	ucchar drr_rst_bit = 1 << (1 + 2 * ch);
+	u8 drr_ena_bit = 1 << (5 + 2 * ch);
+	u8 drr_rst_bit = 1 << (1 + 2 * ch);
 
 	/* Disable DMA */
 	cpc_writeb(scabase + DRR, drr_ena_bit);
@@ -574,8 +572,8 @@ static void tx_dma_stop(pc300_t * card, int ch)
 static void rx_dma_stop(pc300_t * card, int ch)
 {
 	void __iomem *scabase = card->hw.scabase;
-	ucchar drr_ena_bit = 1 << (4 + 2 * ch);
-	ucchar drr_rst_bit = 1 << (2 * ch);
+	u8 drr_ena_bit = 1 << (4 + 2 * ch);
+	u8 drr_rst_bit = 1 << (2 * ch);
 
 	/* Disable DMA */
 	cpc_writeb(scabase + DRR, drr_ena_bit);
@@ -607,7 +605,7 @@ static void rx_dma_start(pc300_t * card, int ch)
 /*************************/
 /***   FALC Routines   ***/
 /*************************/
-static void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd)
+static void falc_issue_cmd(pc300_t *card, int ch, u8 cmd)
 {
 	void __iomem *falcbase = card->hw.falcbase;
 	unsigned long i = 0;
@@ -675,7 +673,7 @@ static void falc_intr_enable(pc300_t * card, int ch)
 static void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
 {
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar tshf = card->chan[ch].falc.offset;
+	u8 tshf = card->chan[ch].falc.offset;
 
 	cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch),
 		   cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) & 
@@ -691,7 +689,7 @@ static void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
 static void falc_close_timeslot(pc300_t * card, int ch, int timeslot)
 {
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar tshf = card->chan[ch].falc.offset;
+	u8 tshf = card->chan[ch].falc.offset;
 
 	cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch),
 		   cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) | 
@@ -812,7 +810,7 @@ static void falc_init_t1(pc300_t * card, int ch)
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
+	u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
 
 	/* Switch to T1 mode (PCM 24) */
 	cpc_writeb(falcbase + F_REG(FMR1, ch), FMR1_PMOD);
@@ -981,7 +979,7 @@ static void falc_init_e1(pc300_t * card, int ch)
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
+	u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
 
 	/* Switch to E1 mode (PCM 30) */
 	cpc_writeb(falcbase + F_REG(FMR1, ch),
@@ -1187,7 +1185,7 @@ static void te_config(pc300_t * card, int ch)
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar dummy;
+	u8 dummy;
 	unsigned long flags;
 
 	memset(pfalc, 0, sizeof(falc_t));
@@ -1403,7 +1401,7 @@ static void falc_update_stats(pc300_t * card, int ch)
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucshort counter;
+	u16 counter;
 
 	counter = cpc_readb(falcbase + F_REG(FECL, ch));
 	counter |= cpc_readb(falcbase + F_REG(FECH, ch)) << 8;
@@ -1729,7 +1727,7 @@ static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate)
  * Description:	This routine returns the bit error counter value
  *----------------------------------------------------------------------------
  */
-static ucshort falc_pattern_test_error(pc300_t * card, int ch)
+static u16 falc_pattern_test_error(pc300_t * card, int ch)
 {
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
@@ -1776,7 +1774,7 @@ static void cpc_tx_timeout(struct net_device *dev)
 	pc300_t *card = (pc300_t *) chan->card;
 	int ch = chan->channel;
 	unsigned long flags;
-	ucchar ilar;
+	u8 ilar;
 
 	dev->stats.tx_errors++;
 	dev->stats.tx_aborted_errors++;
@@ -1807,11 +1805,7 @@ static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev)
 	int i;
 #endif
 
-	if (chan->conf.monitor) {
-		/* In monitor mode no Tx is done: ignore packet */
-		dev_kfree_skb(skb);
-		return 0;
-	} else if (!netif_carrier_ok(dev)) {
+	if (!netif_carrier_ok(dev)) {
 		/* DCD must be OFF: drop packet */
 		dev_kfree_skb(skb);
 		dev->stats.tx_errors++;
@@ -1836,7 +1830,7 @@ static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	/* Write buffer to DMA buffers */
-	if (dma_buf_write(card, ch, (ucchar *) skb->data, skb->len) != 0) {
+	if (dma_buf_write(card, ch, (u8 *)skb->data, skb->len) != 0) {
 //		printk("%s: write error. Dropping TX packet.\n", dev->name);
 		netif_stop_queue(dev);
 		dev_kfree_skb(skb);
@@ -2001,7 +1995,7 @@ static void sca_tx_intr(pc300dev_t *dev)
 static void sca_intr(pc300_t * card)
 {
 	void __iomem *scabase = card->hw.scabase;
-	volatile uclong status;
+	volatile u32 status;
 	int ch;
 	int intr_count = 0;
 	unsigned char dsr_rx;
@@ -2016,7 +2010,7 @@ static void sca_intr(pc300_t * card)
 
 	    /**** Reception ****/
 			if (status & IR0_DRX((IR0_DMIA | IR0_DMIB), ch)) {
-				ucchar drx_stat = cpc_readb(scabase + DSR_RX(ch));
+				u8 drx_stat = cpc_readb(scabase + DSR_RX(ch));
 
 				/* Clear RX interrupts */
 				cpc_writeb(scabase + DSR_RX(ch), drx_stat | DSR_DWE);
@@ -2090,7 +2084,7 @@ static void sca_intr(pc300_t * card)
 
 	    /**** Transmission ****/
 			if (status & IR0_DTX((IR0_EFT | IR0_DMIA | IR0_DMIB), ch)) {
-				ucchar dtx_stat = cpc_readb(scabase + DSR_TX(ch));
+				u8 dtx_stat = cpc_readb(scabase + DSR_TX(ch));
 
 				/* Clear TX interrupts */
 				cpc_writeb(scabase + DSR_TX(ch), dtx_stat | DSR_DWE);
@@ -2134,7 +2128,7 @@ static void sca_intr(pc300_t * card)
 
 	    /**** MSCI ****/
 			if (status & IR0_M(IR0_RXINTA, ch)) {
-				ucchar st1 = cpc_readb(scabase + M_REG(ST1, ch));
+				u8 st1 = cpc_readb(scabase + M_REG(ST1, ch));
 
 				/* Clear MSCI interrupts */
 				cpc_writeb(scabase + M_REG(ST1, ch), st1);
@@ -2176,7 +2170,7 @@ static void sca_intr(pc300_t * card)
 	}
 }
 
-static void falc_t1_loop_detection(pc300_t * card, int ch, ucchar frs1)
+static void falc_t1_loop_detection(pc300_t *card, int ch, u8 frs1)
 {
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
@@ -2201,7 +2195,7 @@ static void falc_t1_loop_detection(pc300_t * card, int ch, ucchar frs1)
 	}
 }
 
-static void falc_e1_loop_detection(pc300_t * card, int ch, ucchar rsp)
+static void falc_e1_loop_detection(pc300_t *card, int ch, u8 rsp)
 {
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
@@ -2231,8 +2225,8 @@ static void falc_t1_intr(pc300_t * card, int ch)
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar isr0, isr3, gis;
-	ucchar dummy;
+	u8 isr0, isr3, gis;
+	u8 dummy;
 
 	while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) {
 		if (gis & GIS_ISR0) {
@@ -2278,8 +2272,8 @@ static void falc_e1_intr(pc300_t * card, int ch)
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar isr1, isr2, isr3, gis, rsp;
-	ucchar dummy;
+	u8 isr1, isr2, isr3, gis, rsp;
+	u8 dummy;
 
 	while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) {
 		rsp = cpc_readb(falcbase + F_REG(RSP, ch));
@@ -2361,7 +2355,7 @@ static void falc_intr(pc300_t * card)
 static irqreturn_t cpc_intr(int irq, void *dev_id)
 {
 	pc300_t *card = dev_id;
-	volatile ucchar plx_status;
+	volatile u8 plx_status;
 
 	if (!card) {
 #ifdef PC300_DEBUG_INTR
@@ -2400,7 +2394,7 @@ static irqreturn_t cpc_intr(int irq, void *dev_id)
 
 static void cpc_sca_status(pc300_t * card, int ch)
 {
-	ucchar ilar;
+	u8 ilar;
 	void __iomem *scabase = card->hw.scabase;
 	unsigned long flags;
 
@@ -2818,7 +2812,7 @@ static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	}
 }
 
-static int clock_rate_calc(uclong rate, uclong clock, int *br_io)
+static int clock_rate_calc(u32 rate, u32 clock, int *br_io)
 {
 	int br, tc;
 	int br_pwr, error;
@@ -2855,12 +2849,12 @@ static int ch_config(pc300dev_t * d)
 	void __iomem *scabase = card->hw.scabase;
 	void __iomem *plxbase = card->hw.plxbase;
 	int ch = chan->channel;
-	uclong clkrate = chan->conf.phys_settings.clock_rate;
-	uclong clktype = chan->conf.phys_settings.clock_type;
-	ucshort encoding = chan->conf.proto_settings.encoding;
-	ucshort parity = chan->conf.proto_settings.parity;   
-	ucchar md0, md2;
-    
+	u32 clkrate = chan->conf.phys_settings.clock_rate;
+	u32 clktype = chan->conf.phys_settings.clock_type;
+	u16 encoding = chan->conf.proto_settings.encoding;
+	u16 parity = chan->conf.proto_settings.parity;
+	u8 md0, md2;
+
 	/* Reset the channel */
 	cpc_writeb(scabase + M_REG(CMD, ch), CMD_CH_RST);
 
@@ -3152,19 +3146,10 @@ int cpc_open(struct net_device *dev)
 	printk("pc300: cpc_open");
 #endif
 
-#ifdef FIXME
-	if (hdlc->proto.id == IF_PROTO_PPP) {
-		d->if_ptr = &hdlc->state.ppp.pppdev;
-	}
-#endif
-
 	result = hdlc_open(dev);
-	if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) {
-		dev->priv = d;
-	}
-	if (result) {
+
+	if (result)
 		return result;
-	}
 
 	sprintf(ifr.ifr_name, "%s", dev->name);
 	result = cpc_opench(d);
@@ -3197,9 +3182,7 @@ static int cpc_close(struct net_device *dev)
 	CPC_UNLOCK(card, flags);
 
 	hdlc_close(dev);
-	if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) {
-		d->if_ptr = NULL;
-	}
+
 #ifdef CONFIG_PC300_MLPPP
 	if (chan->conf.proto == PC300_PROTO_MLPPP) {
 		cpc_tty_unregister_service(d);
@@ -3210,16 +3193,16 @@ static int cpc_close(struct net_device *dev)
 	return 0;
 }
 
-static uclong detect_ram(pc300_t * card)
+static u32 detect_ram(pc300_t * card)
 {
-	uclong i;
-	ucchar data;
+	u32 i;
+	u8 data;
 	void __iomem *rambase = card->hw.rambase;
 
 	card->hw.ramsize = PC300_RAMSIZE;
 	/* Let's find out how much RAM is present on this board */
 	for (i = 0; i < card->hw.ramsize; i++) {
-		data = (ucchar) (i & 0xff);
+		data = (u8)(i & 0xff);
 		cpc_writeb(rambase + i, data);
 		if (cpc_readb(rambase + i) != data) {
 			break;
@@ -3296,7 +3279,7 @@ static void cpc_init_card(pc300_t * card)
 	cpc_writeb(card->hw.scabase + DMER, 0x80);
 
 	if (card->hw.type == PC300_TE) {
-		ucchar reg1;
+		u8 reg1;
 
 		/* Check CPLD version */
 		reg1 = cpc_readb(card->hw.falcbase + CPLD_REG1);
@@ -3360,7 +3343,6 @@ static void cpc_init_card(pc300_t * card)
 		chan->nfree_tx_bd = N_DMA_TX_BUF;
 
 		d->chan = chan;
-		d->tx_skb = NULL;
 		d->trace_on = 0;
 		d->line_on = 0;
 		d->line_off = 0;
@@ -3431,7 +3413,7 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int first_time = 1;
 	int err, eeprom_outdated = 0;
-	ucshort device_id;
+	u16 device_id;
 	pc300_t *card;
 
 	if (first_time) {
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index e59255a155a..6596cd0742b 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -1317,7 +1317,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 		break;
 
 	case  SIOCDEVRESINSTATS :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 		memset( &nl->in_stats, 0, sizeof(struct sbni_in_stats) );
 		break;
@@ -1334,7 +1334,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 		break;
 
 	case  SIOCDEVSHWSTATE :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 
 		spin_lock( &nl->lock );
@@ -1355,7 +1355,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 #ifdef CONFIG_SBNI_MULTILINE
 
 	case  SIOCDEVENSLAVE :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 
 		if (copy_from_user( slave_name, ifr->ifr_data, sizeof slave_name ))
@@ -1370,7 +1370,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 		return  enslave( dev, slave_dev );
 
 	case  SIOCDEVEMANSIPATE :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 
 		return  emancipate( dev );
diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index 44a89df1b8b..c0235844a4d 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -8,6 +8,7 @@
  *
  *	(c) Copyright 1999, 2001 Alan Cox
  *	(c) Copyright 2001 Red Hat Inc.
+ *	Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
  *
  */
 
@@ -19,6 +20,7 @@
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <net/arp.h>
@@ -27,22 +29,19 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
-#include <net/syncppp.h>
 #include "z85230.h"
 
 
 struct slvl_device
 {
-	void *if_ptr;	/* General purpose pointer (used by SPPP) */
 	struct z8530_channel *chan;
-	struct ppp_device pppdev;
 	int channel;
 };
 
 
 struct slvl_board
 {
-	struct slvl_device *dev[2];
+	struct slvl_device dev[2];
 	struct z8530_dev board;
 	int iobase;
 };
@@ -51,72 +50,69 @@ struct slvl_board
  *	Network driver support routines
  */
 
+static inline struct slvl_device* dev_to_chan(struct net_device *dev)
+{
+	return (struct slvl_device *)dev_to_hdlc(dev)->priv;
+}
+
 /*
- *	Frame receive. Simple for our card as we do sync ppp and there
+ *	Frame receive. Simple for our card as we do HDLC and there
  *	is no funny garbage involved
  */
- 
+
 static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb)
 {
 	/* Drop the CRC - it's not a good idea to try and negotiate it ;) */
-	skb_trim(skb, skb->len-2);
-	skb->protocol=htons(ETH_P_WAN_PPP);
+	skb_trim(skb, skb->len - 2);
+	skb->protocol = hdlc_type_trans(skb, c->netdevice);
 	skb_reset_mac_header(skb);
-	skb->dev=c->netdevice;
-	/*
-	 *	Send it to the PPP layer. We don't have time to process
-	 *	it right now.
-	 */
+	skb->dev = c->netdevice;
 	netif_rx(skb);
 	c->netdevice->last_rx = jiffies;
 }
- 
+
 /*
  *	We've been placed in the UP state
- */ 
- 
+ */
+
 static int sealevel_open(struct net_device *d)
 {
-	struct slvl_device *slvl=d->priv;
+	struct slvl_device *slvl = dev_to_chan(d);
 	int err = -1;
 	int unit = slvl->channel;
-	
+
 	/*
-	 *	Link layer up. 
+	 *	Link layer up.
 	 */
 
-	switch(unit)
+	switch (unit)
 	{
 		case 0:
-			err=z8530_sync_dma_open(d, slvl->chan);
+			err = z8530_sync_dma_open(d, slvl->chan);
 			break;
 		case 1:
-			err=z8530_sync_open(d, slvl->chan);
+			err = z8530_sync_open(d, slvl->chan);
 			break;
 	}
-	
-	if(err)
+
+	if (err)
 		return err;
-	/*
-	 *	Begin PPP
-	 */
-	err=sppp_open(d);
-	if(err)
-	{
-		switch(unit)
-		{
+
+	err = hdlc_open(d);
+	if (err) {
+		switch (unit) {
 			case 0:
 				z8530_sync_dma_close(d, slvl->chan);
 				break;
 			case 1:
 				z8530_sync_close(d, slvl->chan);
 				break;
-		}				
+		}
 		return err;
 	}
-	
-	slvl->chan->rx_function=sealevel_input;
-	
+
+	slvl->chan->rx_function = sealevel_input;
+
 	/*
 	 *	Go go go
 	 */
@@ -126,26 +122,19 @@ static int sealevel_open(struct net_device *d)
 
 static int sealevel_close(struct net_device *d)
 {
-	struct slvl_device *slvl=d->priv;
+	struct slvl_device *slvl = dev_to_chan(d);
 	int unit = slvl->channel;
-	
+
 	/*
 	 *	Discard new frames
 	 */
-	
-	slvl->chan->rx_function=z8530_null_rx;
-		
-	/*
-	 *	PPP off
-	 */
-	sppp_close(d);
-	/*
-	 *	Link layer down
-	 */
 
+	slvl->chan->rx_function = z8530_null_rx;
+
+	hdlc_close(d);
 	netif_stop_queue(d);
-		
-	switch(unit)
+
+	switch (unit)
 	{
 		case 0:
 			z8530_sync_dma_close(d, slvl->chan);
@@ -159,210 +148,153 @@ static int sealevel_close(struct net_device *d)
 
 static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
 {
-	/* struct slvl_device *slvl=d->priv;
+	/* struct slvl_device *slvl=dev_to_chan(d);
 	   z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */
-	return sppp_do_ioctl(d, ifr,cmd);
-}
-
-static struct net_device_stats *sealevel_get_stats(struct net_device *d)
-{
-	struct slvl_device *slvl=d->priv;
-	if(slvl)
-		return z8530_get_stats(slvl->chan);
-	else
-		return NULL;
+	return hdlc_ioctl(d, ifr, cmd);
 }
 
 /*
- *	Passed PPP frames, fire them downwind.
+ *	Passed network frames, fire them downwind.
  */
- 
+
 static int sealevel_queue_xmit(struct sk_buff *skb, struct net_device *d)
 {
-	struct slvl_device *slvl=d->priv;
-	return z8530_queue_xmit(slvl->chan, skb);
+	return z8530_queue_xmit(dev_to_chan(d)->chan, skb);
 }
 
-static int sealevel_neigh_setup(struct neighbour *n)
+static int sealevel_attach(struct net_device *dev, unsigned short encoding,
+			   unsigned short parity)
 {
-	if (n->nud_state == NUD_NONE) {
-		n->ops = &arp_broken_ops;
-		n->output = n->ops->output;
-	}
-	return 0;
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
 
-static int sealevel_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
+static int slvl_setup(struct slvl_device *sv, int iobase, int irq)
 {
-	if (p->tbl->family == AF_INET) {
-		p->neigh_setup = sealevel_neigh_setup;
-		p->ucast_probes = 0;
-		p->mcast_probes = 0;
+	struct net_device *dev = alloc_hdlcdev(sv);
+	if (!dev)
+		return -1;
+
+	dev_to_hdlc(dev)->attach = sealevel_attach;
+	dev_to_hdlc(dev)->xmit = sealevel_queue_xmit;
+	dev->open = sealevel_open;
+	dev->stop = sealevel_close;
+	dev->do_ioctl = sealevel_ioctl;
+	dev->base_addr = iobase;
+	dev->irq = irq;
+
+	if (register_hdlc_device(dev)) {
+		printk(KERN_ERR "sealevel: unable to register HDLC device\n");
+		free_netdev(dev);
+		return -1;
 	}
-	return 0;
-}
 
-static int sealevel_attach(struct net_device *dev)
-{
-	struct slvl_device *sv = dev->priv;
-	sppp_attach(&sv->pppdev);
+	sv->chan->netdevice = dev;
 	return 0;
 }
 
-static void sealevel_detach(struct net_device *dev)
-{
-	sppp_detach(dev);
-}
-		
-static void slvl_setup(struct net_device *d)
-{
-	d->open = sealevel_open;
-	d->stop = sealevel_close;
-	d->init = sealevel_attach;
-	d->uninit = sealevel_detach;
-	d->hard_start_xmit = sealevel_queue_xmit;
-	d->get_stats = sealevel_get_stats;
-	d->set_multicast_list = NULL;
-	d->do_ioctl = sealevel_ioctl;
-	d->neigh_setup = sealevel_neigh_setup_dev;
-	d->set_mac_address = NULL;
-
-}
-
-static inline struct slvl_device *slvl_alloc(int iobase, int irq)
-{
-	struct net_device *d;
-	struct slvl_device *sv;
-
-	d = alloc_netdev(sizeof(struct slvl_device), "hdlc%d",
-			 slvl_setup);
-
-	if (!d) 
-		return NULL;
-
-	sv = d->priv;
-	d->ml_priv = sv;
-	sv->if_ptr = &sv->pppdev;
-	sv->pppdev.dev = d;
-	d->base_addr = iobase;
-	d->irq = irq;
-		
-	return sv;
-}
-
 
 /*
  *	Allocate and setup Sealevel board.
  */
- 
-static __init struct slvl_board *slvl_init(int iobase, int irq, 
+
+static __init struct slvl_board *slvl_init(int iobase, int irq,
 					   int txdma, int rxdma, int slow)
 {
 	struct z8530_dev *dev;
 	struct slvl_board *b;
-	
+
 	/*
 	 *	Get the needed I/O space
 	 */
 
-	if(!request_region(iobase, 8, "Sealevel 4021")) 
-	{	
-		printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", iobase);
+	if (!request_region(iobase, 8, "Sealevel 4021")) {
+		printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n",
+		       iobase);
 		return NULL;
 	}
-	
-	b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL);
-	if(!b)
-		goto fail3;
 
-	if (!(b->dev[0]= slvl_alloc(iobase, irq)))
-		goto fail2;
+	b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL);
+	if (!b)
+		goto err_kzalloc;
 
-	b->dev[0]->chan = &b->board.chanA;	
-	b->dev[0]->channel = 0;
-	
-	if (!(b->dev[1] = slvl_alloc(iobase, irq)))
-		goto fail1_0;
+	b->dev[0].chan = &b->board.chanA;
+	b->dev[0].channel = 0;
 
-	b->dev[1]->chan = &b->board.chanB;
-	b->dev[1]->channel = 1;
+	b->dev[1].chan = &b->board.chanB;
+	b->dev[1].channel = 1;
 
 	dev = &b->board;
-	
+
 	/*
 	 *	Stuff in the I/O addressing
 	 */
-	 
+
 	dev->active = 0;
 
 	b->iobase = iobase;
-	
+
 	/*
 	 *	Select 8530 delays for the old board
 	 */
-	 
-	if(slow)
+
+	if (slow)
 		iobase |= Z8530_PORT_SLEEP;
-		
-	dev->chanA.ctrlio=iobase+1;
-	dev->chanA.dataio=iobase;
-	dev->chanB.ctrlio=iobase+3;
-	dev->chanB.dataio=iobase+2;
-	
-	dev->chanA.irqs=&z8530_nop;
-	dev->chanB.irqs=&z8530_nop;
-	
+
+	dev->chanA.ctrlio = iobase + 1;
+	dev->chanA.dataio = iobase;
+	dev->chanB.ctrlio = iobase + 3;
+	dev->chanB.dataio = iobase + 2;
+
+	dev->chanA.irqs = &z8530_nop;
+	dev->chanB.irqs = &z8530_nop;
+
 	/*
 	 *	Assert DTR enable DMA
 	 */
-	 
-	outb(3|(1<<7), b->iobase+4);	
-	
+
+	outb(3 | (1 << 7), b->iobase + 4);
+
 
 	/* We want a fast IRQ for this device. Actually we'd like an even faster
 	   IRQ ;) - This is one driver RtLinux is made for */
-   
-	if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev)<0)
-	{
+
+	if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED,
+			"SeaLevel", dev) < 0) {
 		printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq);
-		goto fail1_1;
+		goto err_request_irq;
 	}
-	
-	dev->irq=irq;
-	dev->chanA.private=&b->dev[0];
-	dev->chanB.private=&b->dev[1];
-	dev->chanA.netdevice=b->dev[0]->pppdev.dev;
-	dev->chanB.netdevice=b->dev[1]->pppdev.dev;
-	dev->chanA.dev=dev;
-	dev->chanB.dev=dev;
-
-	dev->chanA.txdma=3;
-	dev->chanA.rxdma=1;
-	if(request_dma(dev->chanA.txdma, "SeaLevel (TX)")!=0)
-		goto fail;
-		
-	if(request_dma(dev->chanA.rxdma, "SeaLevel (RX)")!=0)
-		goto dmafail;
-	
+
+	dev->irq = irq;
+	dev->chanA.private = &b->dev[0];
+	dev->chanB.private = &b->dev[1];
+	dev->chanA.dev = dev;
+	dev->chanB.dev = dev;
+
+	dev->chanA.txdma = 3;
+	dev->chanA.rxdma = 1;
+	if (request_dma(dev->chanA.txdma, "SeaLevel (TX)"))
+		goto err_dma_tx;
+
+	if (request_dma(dev->chanA.rxdma, "SeaLevel (RX)"))
+		goto err_dma_rx;
+
 	disable_irq(irq);
-		
+
 	/*
 	 *	Begin normal initialise
 	 */
-	 
-	if(z8530_init(dev)!=0)
-	{
+
+	if (z8530_init(dev) != 0) {
 		printk(KERN_ERR "Z8530 series device not found.\n");
 		enable_irq(irq);
-		goto dmafail2;
+		goto free_hw;
 	}
-	if(dev->type==Z85C30)
-	{
+	if (dev->type == Z85C30) {
 		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream);
 		z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream);
-	}
-	else
-	{
+	} else {
 		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230);
 		z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230);
 	}
@@ -370,36 +302,31 @@ static __init struct slvl_board *slvl_init(int iobase, int irq,
 	/*
 	 *	Now we can take the IRQ
 	 */
-	
+
 	enable_irq(irq);
 
-	if (register_netdev(b->dev[0]->pppdev.dev)) 
-		goto dmafail2;
-		
-	if (register_netdev(b->dev[1]->pppdev.dev)) 
-		goto fail_unit;
+	if (slvl_setup(&b->dev[0], iobase, irq))
+		goto free_hw;
+	if (slvl_setup(&b->dev[1], iobase, irq))
+		goto free_netdev0;
 
 	z8530_describe(dev, "I/O", iobase);
-	dev->active=1;
+	dev->active = 1;
 	return b;
 
-fail_unit:
-	unregister_netdev(b->dev[0]->pppdev.dev);
-	
-dmafail2:
+free_netdev0:
+	unregister_hdlc_device(b->dev[0].chan->netdevice);
+	free_netdev(b->dev[0].chan->netdevice);
+free_hw:
 	free_dma(dev->chanA.rxdma);
-dmafail:
+err_dma_rx:
 	free_dma(dev->chanA.txdma);
-fail:
+err_dma_tx:
 	free_irq(irq, dev);
-fail1_1:
-	free_netdev(b->dev[1]->pppdev.dev);
-fail1_0:
-	free_netdev(b->dev[0]->pppdev.dev);
-fail2:
+err_request_irq:
 	kfree(b);
-fail3:
-	release_region(iobase,8);
+err_kzalloc:
+	release_region(iobase, 8);
 	return NULL;
 }
 
@@ -408,14 +335,14 @@ static void __exit slvl_shutdown(struct slvl_board *b)
 	int u;
 
 	z8530_shutdown(&b->board);
-	
-	for(u=0; u<2; u++)
+
+	for (u = 0; u < 2; u++)
 	{
-		struct net_device *d = b->dev[u]->pppdev.dev;
-		unregister_netdev(d);
+		struct net_device *d = b->dev[u].chan->netdevice;
+		unregister_hdlc_device(d);
 		free_netdev(d);
 	}
-	
+
 	free_irq(b->board.irq, &b->board);
 	free_dma(b->board.chanA.rxdma);
 	free_dma(b->board.chanA.txdma);
@@ -451,10 +378,6 @@ static struct slvl_board *slvl_unit;
 
 static int __init slvl_init_module(void)
 {
-#ifdef MODULE
-	printk(KERN_INFO "SeaLevel Z85230 Synchronous Driver v 0.02.\n");
-	printk(KERN_INFO "(c) Copyright 1998, Building Number Three Ltd.\n");
-#endif
 	slvl_unit = slvl_init(io, irq, txdma, rxdma, slow);
 
 	return slvl_unit ? 0 : -ENODEV;
diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c
index 29b4b94e494..327d58589e1 100644
--- a/drivers/net/wan/syncppp.c
+++ b/drivers/net/wan/syncppp.c
@@ -230,13 +230,6 @@ static void sppp_input (struct net_device *dev, struct sk_buff *skb)
 	skb->dev=dev;
 	skb_reset_mac_header(skb);
 
-	if (dev->flags & IFF_RUNNING)
-	{
-		/* Count received bytes, add FCS and one flag */
-		sp->ibytes+= skb->len + 3;
-		sp->ipkts++;
-	}
-
 	if (!pskb_may_pull(skb, PPP_HEADER_LEN)) {
 		/* Too small packet, drop it. */
 		if (sp->pp_flags & PP_DEBUG)
@@ -832,7 +825,6 @@ static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type,
 			sppp_print_bytes ((u8*) (lh+1), len);
 		printk (">\n");
 	}
-	sp->obytes += skb->len;
 	/* Control is high priority so it doesn't get queued behind data */
 	skb->priority=TC_PRIO_CONTROL;
 	skb->dev = dev;
@@ -875,7 +867,6 @@ static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2)
 		printk (KERN_WARNING "%s: cisco output: <%xh %xh %xh %xh %xh-%xh>\n",
 			dev->name,  ntohl (ch->type), ch->par1,
 			ch->par2, ch->rel, ch->time0, ch->time1);
-	sp->obytes += skb->len;
 	skb->priority=TC_PRIO_CONTROL;
 	skb->dev = dev;
 	skb_queue_tail(&tx_queue, skb);
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 98ef400908b..243bd8d918f 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -43,6 +43,7 @@
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <asm/dma.h>
@@ -51,7 +52,6 @@
 #define RT_UNLOCK
 #include <linux/spinlock.h>
 
-#include <net/syncppp.h>
 #include "z85230.h"
 
 
@@ -440,51 +440,46 @@ static void z8530_tx(struct z8530_channel *c)
  *	A status event occurred in PIO synchronous mode. There are several
  *	reasons the chip will bother us here. A transmit underrun means we
  *	failed to feed the chip fast enough and just broke a packet. A DCD
- *	change is a line up or down. We communicate that back to the protocol
- *	layer for synchronous PPP to renegotiate.
+ *	change is a line up or down.
  */
 
 static void z8530_status(struct z8530_channel *chan)
 {
 	u8 status, altered;
 
-	status=read_zsreg(chan, R0);
-	altered=chan->status^status;
-	
-	chan->status=status;
-	
-	if(status&TxEOM)
-	{
+	status = read_zsreg(chan, R0);
+	altered = chan->status ^ status;
+
+	chan->status = status;
+
+	if (status & TxEOM) {
 /*		printk("%s: Tx underrun.\n", chan->dev->name); */
-		chan->stats.tx_fifo_errors++;
+		chan->netdevice->stats.tx_fifo_errors++;
 		write_zsctrl(chan, ERR_RES);
 		z8530_tx_done(chan);
 	}
-		
-	if(altered&chan->dcdcheck)
+
+	if (altered & chan->dcdcheck)
 	{
-		if(status&chan->dcdcheck)
-		{
+		if (status & chan->dcdcheck) {
 			printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]|RxENABLE);
-			if(chan->netdevice &&
-			    ((chan->netdevice->type == ARPHRD_HDLC) ||
-			    (chan->netdevice->type == ARPHRD_PPP)))
-				sppp_reopen(chan->netdevice);
-		}
-		else
-		{
+			write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
+			if (chan->netdevice)
+				netif_carrier_on(chan->netdevice);
+		} else {
 			printk(KERN_INFO "%s: DCD lost\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]&~RxENABLE);
+			write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
 			z8530_flush_fifo(chan);
+			if (chan->netdevice)
+				netif_carrier_off(chan->netdevice);
 		}
-		
-	}	
+
+	}
 	write_zsctrl(chan, RES_EXT_INT);
 	write_zsctrl(chan, RES_H_IUS);
 }
 
-struct z8530_irqhandler z8530_sync=
+struct z8530_irqhandler z8530_sync =
 {
 	z8530_rx,
 	z8530_tx,
@@ -556,8 +551,7 @@ static void z8530_dma_tx(struct z8530_channel *chan)
  *	
  *	A status event occurred on the Z8530. We receive these for two reasons
  *	when in DMA mode. Firstly if we finished a packet transfer we get one
- *	and kick the next packet out. Secondly we may see a DCD change and
- *	have to poke the protocol layer.
+ *	and kick the next packet out. Secondly we may see a DCD change.
  *
  */
  
@@ -586,24 +580,21 @@ static void z8530_dma_status(struct z8530_channel *chan)
 		}
 	}
 
-	if(altered&chan->dcdcheck)
+	if (altered & chan->dcdcheck)
 	{
-		if(status&chan->dcdcheck)
-		{
+		if (status & chan->dcdcheck) {
 			printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]|RxENABLE);
-			if(chan->netdevice &&
-			    ((chan->netdevice->type == ARPHRD_HDLC) ||
-			    (chan->netdevice->type == ARPHRD_PPP)))
-				sppp_reopen(chan->netdevice);
-		}
-		else
-		{
+			write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
+			if (chan->netdevice)
+				netif_carrier_on(chan->netdevice);
+		} else {
 			printk(KERN_INFO "%s:DCD lost\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]&~RxENABLE);
+			write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
 			z8530_flush_fifo(chan);
+			if (chan->netdevice)
+				netif_carrier_off(chan->netdevice);
 		}
-	}	
+	}
 
 	write_zsctrl(chan, RES_EXT_INT);
 	write_zsctrl(chan, RES_H_IUS);
@@ -1459,10 +1450,10 @@ static void z8530_tx_begin(struct z8530_channel *c)
 			/*
 			 *	Check if we crapped out.
 			 */
-			if(get_dma_residue(c->txdma))
+			if (get_dma_residue(c->txdma))
 			{
-				c->stats.tx_dropped++;
-				c->stats.tx_fifo_errors++;
+				c->netdevice->stats.tx_dropped++;
+				c->netdevice->stats.tx_fifo_errors++;
 			}
 			release_dma_lock(flags);
 		}
@@ -1534,21 +1525,21 @@ static void z8530_tx_begin(struct z8530_channel *c)
  *	packet. This code is fairly timing sensitive.
  *
  *	Called with the register lock held.
- */ 
- 
+ */
+
 static void z8530_tx_done(struct z8530_channel *c)
 {
 	struct sk_buff *skb;
 
 	/* Actually this can happen.*/
-	if(c->tx_skb==NULL)
+	if (c->tx_skb == NULL)
 		return;
 
-	skb=c->tx_skb;
-	c->tx_skb=NULL;
+	skb = c->tx_skb;
+	c->tx_skb = NULL;
 	z8530_tx_begin(c);
-	c->stats.tx_packets++;
-	c->stats.tx_bytes+=skb->len;
+	c->netdevice->stats.tx_packets++;
+	c->netdevice->stats.tx_bytes += skb->len;
 	dev_kfree_skb_irq(skb);
 }
 
@@ -1558,7 +1549,7 @@ static void z8530_tx_done(struct z8530_channel *c)
  *	@skb: The buffer
  *
  *	We point the receive handler at this function when idle. Instead
- *	of syncppp processing the frames we get to throw them away.
+ *	of processing the frames we get to throw them away.
  */
  
 void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb)
@@ -1635,10 +1626,11 @@ static void z8530_rx_done(struct z8530_channel *c)
 		else
 			/* Can't occur as we dont reenable the DMA irq until
 			   after the flip is done */
-			printk(KERN_WARNING "%s: DMA flip overrun!\n", c->netdevice->name);
-			
+			printk(KERN_WARNING "%s: DMA flip overrun!\n",
+			       c->netdevice->name);
+
 		release_dma_lock(flags);
-		
+
 		/*
 		 *	Shove the old buffer into an sk_buff. We can't DMA
 		 *	directly into one on a PC - it might be above the 16Mb
@@ -1646,27 +1638,23 @@ static void z8530_rx_done(struct z8530_channel *c)
 		 *	can avoid the copy. Optimisation 2 - make the memcpy
 		 *	a copychecksum.
 		 */
-		 
-		skb=dev_alloc_skb(ct);
-		if(skb==NULL)
-		{
-			c->stats.rx_dropped++;
-			printk(KERN_WARNING "%s: Memory squeeze.\n", c->netdevice->name);
-		}
-		else
-		{
+
+		skb = dev_alloc_skb(ct);
+		if (skb == NULL) {
+			c->netdevice->stats.rx_dropped++;
+			printk(KERN_WARNING "%s: Memory squeeze.\n",
+			       c->netdevice->name);
+		} else {
 			skb_put(skb, ct);
 			skb_copy_to_linear_data(skb, rxb, ct);
-			c->stats.rx_packets++;
-			c->stats.rx_bytes+=ct;
+			c->netdevice->stats.rx_packets++;
+			c->netdevice->stats.rx_bytes += ct;
 		}
-		c->dma_ready=1;
-	}
-	else
-	{
-		RT_LOCK;	
-		skb=c->skb;
-		
+		c->dma_ready = 1;
+	} else {
+		RT_LOCK;
+		skb = c->skb;
+
 		/*
 		 *	The game we play for non DMA is similar. We want to
 		 *	get the controller set up for the next packet as fast
@@ -1677,48 +1665,39 @@ static void z8530_rx_done(struct z8530_channel *c)
 		 *	if you build a system where the sync irq isnt blocked
 		 *	by the kernel IRQ disable then you need only block the
 		 *	sync IRQ for the RT_LOCK area.
-		 *	
+		 *
 		 */
 		ct=c->count;
-		
+
 		c->skb = c->skb2;
 		c->count = 0;
 		c->max = c->mtu;
-		if(c->skb)
-		{
+		if (c->skb) {
 			c->dptr = c->skb->data;
 			c->max = c->mtu;
-		}
-		else
-		{
-			c->count= 0;
+		} else {
+			c->count = 0;
 			c->max = 0;
 		}
 		RT_UNLOCK;
 
 		c->skb2 = dev_alloc_skb(c->mtu);
-		if(c->skb2==NULL)
+		if (c->skb2 == NULL)
 			printk(KERN_WARNING "%s: memory squeeze.\n",
-				c->netdevice->name);
+			       c->netdevice->name);
 		else
-		{
-			skb_put(c->skb2,c->mtu);
-		}
-		c->stats.rx_packets++;
-		c->stats.rx_bytes+=ct;
-		
+			skb_put(c->skb2, c->mtu);
+		c->netdevice->stats.rx_packets++;
+		c->netdevice->stats.rx_bytes += ct;
 	}
 	/*
 	 *	If we received a frame we must now process it.
 	 */
-	if(skb)
-	{
+	if (skb) {
 		skb_trim(skb, ct);
-		c->rx_function(c,skb);
-	}
-	else
-	{
-		c->stats.rx_dropped++;
+		c->rx_function(c, skb);
+	} else {
+		c->netdevice->stats.rx_dropped++;
 		printk(KERN_ERR "%s: Lost a frame\n", c->netdevice->name);
 	}
 }
@@ -1730,7 +1709,7 @@ static void z8530_rx_done(struct z8530_channel *c)
  *	Returns true if the buffer cross a DMA boundary on a PC. The poor
  *	thing can only DMA within a 64K block not across the edges of it.
  */
- 
+
 static inline int spans_boundary(struct sk_buff *skb)
 {
 	unsigned long a=(unsigned long)skb->data;
@@ -1799,24 +1778,6 @@ int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb)
 
 EXPORT_SYMBOL(z8530_queue_xmit);
 
-/**
- *	z8530_get_stats - Get network statistics
- *	@c: The channel to use
- *
- *	Get the statistics block. We keep the statistics in software as
- *	the chip doesn't do it for us.
- *
- *	Locking is ignored here - we could lock for a copy but its
- *	not likely to be that big an issue
- */
- 
-struct net_device_stats *z8530_get_stats(struct z8530_channel *c)
-{
-	return &c->stats;
-}
-
-EXPORT_SYMBOL(z8530_get_stats);
-
 /*
  *	Module support
  */
diff --git a/drivers/net/wan/z85230.h b/drivers/net/wan/z85230.h
index 158aea7b8ea..4f372396c51 100644
--- a/drivers/net/wan/z85230.h
+++ b/drivers/net/wan/z85230.h
@@ -325,7 +325,6 @@ struct z8530_channel
 
 	void		*private;	/* For our owner */
 	struct net_device	*netdevice;	/* Network layer device */
-	struct net_device_stats stats;	/* Network layer statistics */
 
 	/*
 	 *	Async features
@@ -366,13 +365,13 @@ struct z8530_channel
 	unsigned char		tx_active; /* character is being xmitted */
 	unsigned char		tx_stopped; /* output is suspended */
 
-	spinlock_t		*lock;	  /* Devicr lock */
-};	
+	spinlock_t		*lock;	  /* Device lock */
+};
 
 /*
  *	Each Z853x0 device.
- */	
- 
+ */
+
 struct z8530_dev
 {
 	char *name;	/* Device instance name */
@@ -408,7 +407,6 @@ extern int z8530_sync_txdma_open(struct net_device *, struct z8530_channel *);
 extern int z8530_sync_txdma_close(struct net_device *, struct z8530_channel *);
 extern int z8530_channel_load(struct z8530_channel *, u8 *);
 extern int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb);
-extern struct net_device_stats *z8530_get_stats(struct z8530_channel *c);
 extern void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb);
 
 
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 91fc2c765d9..9931b5ab59c 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -649,6 +649,7 @@ config RTL8187
 	  Trendnet TEW-424UB
 	  ASUS P5B Deluxe
 	  Toshiba Satellite Pro series of laptops
+	  Asus Wireless Link
 
 	  Thanks to Realtek for their support!
 
@@ -694,6 +695,7 @@ config MAC80211_HWSIM
 
 source "drivers/net/wireless/p54/Kconfig"
 source "drivers/net/wireless/ath5k/Kconfig"
+source "drivers/net/wireless/ath9k/Kconfig"
 source "drivers/net/wireless/iwlwifi/Kconfig"
 source "drivers/net/wireless/hostap/Kconfig"
 source "drivers/net/wireless/b43/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 54a4f6f1db6..59aa89ec6e8 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -62,5 +62,6 @@ obj-$(CONFIG_RT2X00)	+= rt2x00/
 obj-$(CONFIG_P54_COMMON)	+= p54/
 
 obj-$(CONFIG_ATH5K)	+= ath5k/
+obj-$(CONFIG_ATH9K)	+= ath9k/
 
 obj-$(CONFIG_MAC80211_HWSIM)	+= mac80211_hwsim.o
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
index ba35c30d203..9102eea3c8b 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -186,11 +186,13 @@ struct ath5k_srev_name {
 #define AR5K_SREV_RAD_2111	0x20
 #define AR5K_SREV_RAD_5112	0x30
 #define AR5K_SREV_RAD_5112A	0x35
+#define	AR5K_SREV_RAD_5112B	0x36
 #define AR5K_SREV_RAD_2112	0x40
 #define AR5K_SREV_RAD_2112A	0x45
-#define AR5K_SREV_RAD_SC0	0x56	/* Found on 2413/2414 */
-#define AR5K_SREV_RAD_SC1	0x63	/* Found on 5413/5414 */
-#define AR5K_SREV_RAD_SC2	0xa2	/* Found on 2424-5/5424 */
+#define	AR5K_SREV_RAD_2112B	0x46
+#define AR5K_SREV_RAD_SC0	0x50	/* Found on 2413/2414 */
+#define AR5K_SREV_RAD_SC1	0x60	/* Found on 5413/5414 */
+#define AR5K_SREV_RAD_SC2	0xa0	/* Found on 2424-5/5424 */
 #define AR5K_SREV_RAD_5133	0xc0	/* MIMO found on 5418 */
 
 /* IEEE defs */
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index d9769c52734..0676c6d8438 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -40,10 +40,11 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 #include <linux/if.h>
+#include <linux/io.h>
 #include <linux/netdevice.h>
 #include <linux/cache.h>
 #include <linux/pci.h>
@@ -93,8 +94,6 @@ static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
 	{ PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
 	{ PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
 	{ PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* 5424 Condor (PCI-E)*/
-	{ PCI_VDEVICE(ATHEROS, 0x0023), .driver_data = AR5K_AR5212 }, /* 5416 */
-	{ PCI_VDEVICE(ATHEROS, 0x0024), .driver_data = AR5K_AR5212 }, /* 5418 */
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
@@ -252,7 +251,7 @@ static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
 		return;
 	pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
 			PCI_DMA_TODEVICE);
-	dev_kfree_skb(bf->skb);
+	dev_kfree_skb_any(bf->skb);
 	bf->skb = NULL;
 }
 
@@ -467,13 +466,11 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	mutex_init(&sc->lock);
 	spin_lock_init(&sc->rxbuflock);
 	spin_lock_init(&sc->txbuflock);
+	spin_lock_init(&sc->block);
 
 	/* Set private data */
 	pci_set_drvdata(pdev, hw);
 
-	/* Enable msi for devices that support it */
-	pci_enable_msi(pdev);
-
 	/* Setup interrupt handler */
 	ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
 	if (ret) {
@@ -551,7 +548,6 @@ err_ah:
 err_irq:
 	free_irq(pdev->irq, sc);
 err_free:
-	pci_disable_msi(pdev);
 	ieee80211_free_hw(hw);
 err_map:
 	pci_iounmap(pdev, mem);
@@ -573,7 +569,6 @@ ath5k_pci_remove(struct pci_dev *pdev)
 	ath5k_detach(pdev, hw);
 	ath5k_hw_detach(sc->ah);
 	free_irq(pdev->irq, sc);
-	pci_disable_msi(pdev);
 	pci_iounmap(pdev, sc->iobase);
 	pci_release_region(pdev, 0);
 	pci_disable_device(pdev);
@@ -590,6 +585,8 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	ath5k_led_off(sc);
 
 	ath5k_stop_hw(sc);
+
+	free_irq(pdev->irq, sc);
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
@@ -605,15 +602,12 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	struct ath5k_hw *ah = sc->ah;
 	int i, err;
 
-	err = pci_set_power_state(pdev, PCI_D0);
-	if (err)
-		return err;
+	pci_restore_state(pdev);
 
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
 
-	pci_restore_state(pdev);
 	/*
 	 * Suspend/Resume resets the PCI configuration space, so we have to
 	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
@@ -621,7 +615,15 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	 */
 	pci_write_config_byte(pdev, 0x41, 0);
 
-	ath5k_init(sc);
+	err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+	if (err) {
+		ATH5K_ERR(sc, "request_irq failed\n");
+		goto err_no_irq;
+	}
+
+	err = ath5k_init(sc);
+	if (err)
+		goto err_irq;
 	ath5k_led_enable(sc);
 
 	/*
@@ -635,6 +637,11 @@ ath5k_pci_resume(struct pci_dev *pdev)
 		ath5k_hw_reset_key(ah, i);
 
 	return 0;
+err_irq:
+	free_irq(pdev->irq, sc);
+err_no_irq:
+	pci_disable_device(pdev);
+	return err;
 }
 #endif /* CONFIG_PM */
 
@@ -1224,7 +1231,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
 	pktlen = skb->len;
 
-	if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) {
+	if (info->control.hw_key) {
 		keyidx = info->control.hw_key->hw_key_idx;
 		pktlen += info->control.icv_len;
 	}
@@ -1249,6 +1256,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
 	txq->link = &ds->ds_link;
 	ath5k_hw_tx_start(ah, txq->qnum);
+	mmiowb();
 	spin_unlock_bh(&txq->lock);
 
 	return 0;
@@ -1583,7 +1591,6 @@ ath5k_rx_stop(struct ath5k_softc *sc)
 	ath5k_hw_stop_pcu_recv(ah);	/* disable PCU */
 	ath5k_hw_set_rx_filter(ah, 0);	/* clear recv filter */
 	ath5k_hw_stop_rx_dma(ah);	/* disable DMA engine */
-	mdelay(3);			/* 3ms is long enough for 1 frame */
 
 	ath5k_debug_printrxbuffs(sc, ah);
 
@@ -1682,31 +1689,44 @@ ath5k_tasklet_rx(unsigned long data)
 	struct ath5k_rx_status rs = {};
 	struct sk_buff *skb;
 	struct ath5k_softc *sc = (void *)data;
-	struct ath5k_buf *bf;
+	struct ath5k_buf *bf, *bf_last;
 	struct ath5k_desc *ds;
 	int ret;
 	int hdrlen;
 	int pad;
 
 	spin_lock(&sc->rxbuflock);
+	if (list_empty(&sc->rxbuf)) {
+		ATH5K_WARN(sc, "empty rx buf pool\n");
+		goto unlock;
+	}
+	bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
 	do {
 		rxs.flag = 0;
 
-		if (unlikely(list_empty(&sc->rxbuf))) {
-			ATH5K_WARN(sc, "empty rx buf pool\n");
-			break;
-		}
 		bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
 		BUG_ON(bf->skb == NULL);
 		skb = bf->skb;
 		ds = bf->desc;
 
-		/* TODO only one segment */
-		pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
-				sc->desc_len, PCI_DMA_FROMDEVICE);
-
-		if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */
-			break;
+		/*
+		 * last buffer must not be freed to ensure proper hardware
+		 * function. When the hardware finishes also a packet next to
+		 * it, we are sure, it doesn't use it anymore and we can go on.
+		 */
+		if (bf_last == bf)
+			bf->flags |= 1;
+		if (bf->flags) {
+			struct ath5k_buf *bf_next = list_entry(bf->list.next,
+					struct ath5k_buf, list);
+			ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
+					&rs);
+			if (ret)
+				break;
+			bf->flags &= ~1;
+			/* skip the overwritten one (even status is martian) */
+			goto next;
+		}
 
 		ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
 		if (unlikely(ret == -EINPROGRESS))
@@ -1752,8 +1772,6 @@ ath5k_tasklet_rx(unsigned long data)
 				goto next;
 		}
 accept:
-		pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr,
-				rs.rs_datalen, PCI_DMA_FROMDEVICE);
 		pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
 				PCI_DMA_FROMDEVICE);
 		bf->skb = NULL;
@@ -1816,6 +1834,7 @@ accept:
 next:
 		list_move_tail(&bf->list, &sc->rxbuf);
 	} while (ath5k_rxbuf_setup(sc, bf) == 0);
+unlock:
 	spin_unlock(&sc->rxbuflock);
 }
 
@@ -1840,9 +1859,6 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
 	list_for_each_entry_safe(bf, bf0, &txq->q, list) {
 		ds = bf->desc;
 
-		/* TODO only one segment */
-		pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
-				sc->desc_len, PCI_DMA_FROMDEVICE);
 		ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
 		if (unlikely(ret == -EINPROGRESS))
 			break;
@@ -2015,8 +2031,6 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 		ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
 		/* NB: hw still stops DMA, so proceed */
 	}
-	pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len,
-			PCI_DMA_TODEVICE);
 
 	ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
 	ath5k_hw_tx_start(ah, sc->bhalq);
@@ -2150,6 +2164,7 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 
 	ath5k_hw_set_intr(ah, 0);
 	sc->bmisscount = 0;
+	sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
 
 	if (sc->opmode == IEEE80211_IF_TYPE_STA) {
 		sc->imask |= AR5K_INT_BMISS;
@@ -2165,8 +2180,11 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 
 		sc->imask |= AR5K_INT_SWBA;
 
-		if (ath5k_hw_hasveol(ah))
+		if (ath5k_hw_hasveol(ah)) {
+			spin_lock(&sc->block);
 			ath5k_beacon_send(sc);
+			spin_unlock(&sc->block);
+		}
 	}
 	/* TODO else AP */
 
@@ -2240,6 +2258,7 @@ ath5k_init(struct ath5k_softc *sc)
 
 	ret = 0;
 done:
+	mmiowb();
 	mutex_unlock(&sc->lock);
 	return ret;
 }
@@ -2272,6 +2291,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
 		ath5k_led_off(sc);
 		ath5k_hw_set_intr(ah, 0);
+		synchronize_irq(sc->pdev->irq);
 	}
 	ath5k_txq_cleanup(sc);
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
@@ -2321,9 +2341,13 @@ ath5k_stop_hw(struct ath5k_softc *sc)
 		}
 	}
 	ath5k_txbuf_free(sc, sc->bbuf);
+	mmiowb();
 	mutex_unlock(&sc->lock);
 
 	del_timer_sync(&sc->calib_tim);
+	tasklet_kill(&sc->rxtq);
+	tasklet_kill(&sc->txtq);
+	tasklet_kill(&sc->restq);
 
 	return ret;
 }
@@ -2383,7 +2407,9 @@ ath5k_intr(int irq, void *dev_id)
 						  TSF_TO_TU(tsf),
 						  (unsigned long long) tsf);
 				} else {
+					spin_lock(&sc->block);
 					ath5k_beacon_send(sc);
+					spin_unlock(&sc->block);
 				}
 			}
 			if (status & AR5K_INT_RXEOL) {
@@ -2550,8 +2576,6 @@ ath5k_init_leds(struct ath5k_softc *sc)
 	struct pci_dev *pdev = sc->pdev;
 	char name[ATH5K_LED_MAX_NAME_LEN + 1];
 
-	sc->led_on = 0;  /* active low */
-
 	/*
 	 * Auto-enable soft led processing for IBM cards and for
 	 * 5211 minipci cards.
@@ -2560,11 +2584,13 @@ ath5k_init_leds(struct ath5k_softc *sc)
 	    pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
 		__set_bit(ATH_STAT_LEDSOFT, sc->status);
 		sc->led_pin = 0;
+		sc->led_on = 0;  /* active low */
 	}
 	/* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
 	if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
 		__set_bit(ATH_STAT_LEDSOFT, sc->status);
 		sc->led_pin = 1;
+		sc->led_on = 1;  /* active high */
 	}
 	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
 		goto out;
@@ -2725,6 +2751,11 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 		ret = -EOPNOTSUPP;
 		goto end;
 	}
+
+	/* Set to a reasonable value. Note that this will
+	 * be set to mac80211's value at ath5k_config(). */
+	sc->bintval = 1000;
+
 	ret = 0;
 end:
 	mutex_unlock(&sc->lock);
@@ -2769,9 +2800,6 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	struct ath5k_hw *ah = sc->ah;
 	int ret;
 
-	/* Set to a reasonable value. Note that this will
-	 * be set to mac80211's value at ath5k_config(). */
-	sc->bintval = 1000;
 	mutex_lock(&sc->lock);
 	if (sc->vif != vif) {
 		ret = -EIO;
@@ -2783,6 +2811,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
 		 * a clean way of letting us retrieve this yet. */
 		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+		mmiowb();
 	}
 
 	if (conf->changed & IEEE80211_IFCC_BEACON &&
@@ -2971,6 +3000,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	}
 
 unlock:
+	mmiowb();
 	mutex_unlock(&sc->lock);
 	return ret;
 }
@@ -3028,27 +3058,29 @@ static int
 ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct ath5k_softc *sc = hw->priv;
+	unsigned long flags;
 	int ret;
 
 	ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
 
-	mutex_lock(&sc->lock);
-
 	if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
 		ret = -EIO;
 		goto end;
 	}
 
+	spin_lock_irqsave(&sc->block, flags);
 	ath5k_txbuf_free(sc, sc->bbuf);
 	sc->bbuf->skb = skb;
 	ret = ath5k_beacon_setup(sc, sc->bbuf);
 	if (ret)
 		sc->bbuf->skb = NULL;
-	else
+	spin_unlock_irqrestore(&sc->block, flags);
+	if (!ret) {
 		ath5k_beacon_config(sc);
+		mmiowb();
+	}
 
 end:
-	mutex_unlock(&sc->lock);
 	return ret;
 }
 
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index 47f414b09e6..7ec2f377d5c 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -56,7 +56,7 @@
 
 struct ath5k_buf {
 	struct list_head	list;
-	unsigned int		flags;	/* tx descriptor flags */
+	unsigned int		flags;	/* rx descriptor flags */
 	struct ath5k_desc	*desc;	/* virtual addr of desc */
 	dma_addr_t		daddr;	/* physical addr of desc */
 	struct sk_buff		*skb;	/* skbuff for buf */
@@ -172,6 +172,7 @@ struct ath5k_softc {
 	struct tasklet_struct	txtq;		/* tx intr tasklet */
 	struct ath5k_led	tx_led;		/* tx led */
 
+	spinlock_t		block;		/* protects beacon */
 	struct ath5k_buf	*bbuf;		/* beacon buffer */
 	unsigned int		bhalq,		/* SW q for outgoing beacons */
 				bmisscount,	/* missed beacon transmits */
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c
index 41d5fa34b54..6fa6c8e04ff 100644
--- a/drivers/net/wireless/ath5k/debug.c
+++ b/drivers/net/wireless/ath5k/debug.c
@@ -129,7 +129,7 @@ static struct reg regs[] = {
 	REG_STRUCT_INIT(AR5K_CPC1),
 	REG_STRUCT_INIT(AR5K_CPC2),
 	REG_STRUCT_INIT(AR5K_CPC3),
-	REG_STRUCT_INIT(AR5K_CPCORN),
+	REG_STRUCT_INIT(AR5K_CPCOVF),
 	REG_STRUCT_INIT(AR5K_RESET_CTL),
 	REG_STRUCT_INIT(AR5K_SLEEP_CTL),
 	REG_STRUCT_INIT(AR5K_INTPEND),
diff --git a/drivers/net/wireless/ath5k/debug.h b/drivers/net/wireless/ath5k/debug.h
index 2cf8d18b10e..ffc52939330 100644
--- a/drivers/net/wireless/ath5k/debug.h
+++ b/drivers/net/wireless/ath5k/debug.h
@@ -63,7 +63,6 @@
 
 struct ath5k_softc;
 struct ath5k_hw;
-struct ieee80211_hw_mode;
 struct sk_buff;
 struct ath5k_buf;
 
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index c6d12c53bda..ad1a5b422c8 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -139,6 +139,8 @@ static int ath5k_hw_post(struct ath5k_hw *ah)
 	for (c = 0; c < 2; c++) {
 
 		cur_reg = regs[c];
+
+		/* Save previous value */
 		init_val = ath5k_hw_reg_read(ah, cur_reg);
 
 		for (i = 0; i < 256; i++) {
@@ -170,6 +172,10 @@ static int ath5k_hw_post(struct ath5k_hw *ah)
 			var_pattern = 0x003b080f;
 			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
 		}
+
+		/* Restore previous value */
+		ath5k_hw_reg_write(ah, init_val, cur_reg);
+
 	}
 
 	return 0;
@@ -287,67 +293,42 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 	/* Identify the radio chip*/
 	if (ah->ah_version == AR5K_AR5210) {
 		ah->ah_radio = AR5K_RF5110;
+	/*
+	 * Register returns 0x0/0x04 for radio revision
+	 * so ath5k_hw_radio_revision doesn't parse the value
+	 * correctly. For now we are based on mac's srev to
+	 * identify RF2425 radio.
+	 */
+	} else if (srev == AR5K_SREV_VER_AR2425) {
+		ah->ah_radio = AR5K_RF2425;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
 	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) {
 		ah->ah_radio = AR5K_RF5111;
 		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
 	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) {
-
 		ah->ah_radio = AR5K_RF5112;
-
-		if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) {
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
-		} else {
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A;
-		}
-
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
 	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) {
 		ah->ah_radio = AR5K_RF2413;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
 	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) {
 		ah->ah_radio = AR5K_RF5413;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
 	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) {
-
 		/* AR5424 */
 		if (srev >= AR5K_SREV_VER_AR5424) {
 			ah->ah_radio = AR5K_RF5413;
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5424;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
 		/* AR2424 */
 		} else {
 			ah->ah_radio = AR5K_RF2413; /* For testing */
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
 		}
-
-	/*
-	 * Register returns 0x4 for radio revision
-	 * so ath5k_hw_radio_revision doesn't parse the value
-	 * correctly. For now we are based on mac's srev to
-	 * identify RF2425 radio.
-	 */
-	} else if (srev == AR5K_SREV_VER_AR2425) {
-		ah->ah_radio = AR5K_RF2425;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
 	}
-
 	ah->ah_phy = AR5K_PHY(0);
 
 	/*
-	 * Identify AR5212-based PCI-E cards
-	 * And write some initial settings.
-	 *
-	 * (doing a "strings" on ndis driver
-	 * -ar5211.sys- reveals the following
-	 * pci-e related functions:
-	 *
-	 * pcieClockReq
-	 * pcieRxErrNotify
-	 * pcieL1SKPEnable
-	 * pcieAspm
-	 * pcieDisableAspmOnRfWake
-	 * pciePowerSaveEnable
-	 *
-	 * I guess these point to ClockReq but
-	 * i'm not sure.)
+	 * Write PCI-E power save settings
 	 */
 	if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
 		ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080);
@@ -369,10 +350,15 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 	if (ret)
 		goto err_free;
 
+	/* Write AR5K_PCICFG_UNK on 2112B and later chips */
+	if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B ||
+	srev > AR5K_SREV_VER_AR2413) {
+		ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG);
+	}
+
 	/*
 	 * Get card capabilities, values, ...
 	 */
-
 	ret = ath5k_eeprom_init(ah);
 	if (ret) {
 		ATH5K_ERR(sc, "unable to init EEPROM\n");
@@ -843,27 +829,41 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 		 * Write some more initial register settings
 		 */
 		if (ah->ah_version == AR5K_AR5212) {
-			ath5k_hw_reg_write(ah, 0x0002a002, AR5K_PHY(11));
+			ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
 
 			if (channel->hw_value == CHANNEL_G)
 				if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413)
 					ath5k_hw_reg_write(ah, 0x00f80d80,
-						AR5K_PHY(83));
+								0x994c);
 				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424)
 					ath5k_hw_reg_write(ah, 0x00380140,
-						AR5K_PHY(83));
+								0x994c);
 				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425)
 					ath5k_hw_reg_write(ah, 0x00fc0ec0,
-						AR5K_PHY(83));
+								0x994c);
 				else /* 2425 */
 					ath5k_hw_reg_write(ah, 0x00fc0fc0,
-						AR5K_PHY(83));
+								0x994c);
 			else
-				ath5k_hw_reg_write(ah, 0x00000000,
-					AR5K_PHY(83));
-
-			ath5k_hw_reg_write(ah, 0x000009b5, 0xa228);
-			ath5k_hw_reg_write(ah, 0x0000000f, 0x8060);
+				ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
+
+			/* Some bits are disabled here, we know nothing about
+			 * register 0xa228 yet, most of the times this ends up
+			 * with a value 0x9b5 -haven't seen any dump with
+			 * a different value- */
+			/* Got this from decompiling binary HAL */
+			data = ath5k_hw_reg_read(ah, 0xa228);
+			data &= 0xfffffdff;
+			ath5k_hw_reg_write(ah, data, 0xa228);
+
+			data = ath5k_hw_reg_read(ah, 0xa228);
+			data &= 0xfffe03ff;
+			ath5k_hw_reg_write(ah, data, 0xa228);
+			data = 0;
+
+			/* Just write 0x9b5 ? */
+			/* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
+			ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
 			ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
 			ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
 		}
@@ -879,6 +879,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 			else
 				data = 0xffb80d20;
 			ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+			data = 0;
 		}
 
 		/*
@@ -898,7 +899,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 
 		/*
 		 * Write RF registers
-		 * TODO:Does this work on 5211 (5111) ?
 		 */
 		ret = ath5k_hw_rfregs(ah, channel, mode);
 		if (ret)
@@ -935,7 +935,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 			return ret;
 
 		/* Set antenna mode */
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x44),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL,
 			ah->ah_antenna[ee_mode][0], 0xfffffc06);
 
 		/*
@@ -965,15 +965,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 
 		ath5k_hw_reg_write(ah,
 			AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
-			AR5K_PHY(0x5a));
+			AR5K_PHY_NFTHRES);
 
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x11),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING,
 			(ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
 			0xffffc07f);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x12),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN,
 			(ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000,
 			0xfffc0fff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x14),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE,
 			(ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
 			((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
 			0xffff0000);
@@ -982,13 +982,13 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 			(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
 			(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
 			(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
-			(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY(0x0d));
+			(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
 
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x0a),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3,
 			ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x19),
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF,
 			(ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x49), 4, 0xffffff01);
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01);
 
 		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
 		    AR5K_PHY_IQ_CORR_ENABLE |
@@ -1063,7 +1063,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
 
 	/*
-	 * 5111/5112 Specific
+	 * On 5211+ read activation -> rx delay
+	 * and use it.
 	 */
 	if (ah->ah_version != AR5K_AR5210) {
 		data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
@@ -1071,40 +1072,77 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 		data = (channel->hw_value & CHANNEL_CCK) ?
 			((data << 2) / 22) : (data / 10);
 
-		udelay(100 + data);
+		udelay(100 + (2 * data));
+		data = 0;
 	} else {
 		mdelay(1);
 	}
 
 	/*
-	 * Enable calibration and wait until completion
+	 * Perform ADC test (?)
+	 */
+	data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+	for (i = 0; i <= 20; i++) {
+		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+			break;
+		udelay(200);
+	}
+	ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1);
+	data = 0;
+
+	/*
+	 * Start automatic gain calibration
+	 *
+	 * During AGC calibration RX path is re-routed to
+	 * a signal detector so we don't receive anything.
+	 *
+	 * This method is used to calibrate some static offsets
+	 * used together with on-the fly I/Q calibration (the
+	 * one performed via ath5k_hw_phy_calibrate), that doesn't
+	 * interrupt rx path.
+	 *
+	 * If we are in a noisy environment AGC calibration may time
+	 * out.
 	 */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
 				AR5K_PHY_AGCCTL_CAL);
 
+	/* At the same time start I/Q calibration for QAM constellation
+	 * -no need for CCK- */
+	ah->ah_calibration = false;
+	if (!(mode == AR5K_MODE_11B)) {
+		ah->ah_calibration = true;
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_RUN);
+	}
+
+	/* Wait for gain calibration to finish (we check for I/Q calibration
+	 * during ath5k_phy_calibrate) */
 	if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
 			AR5K_PHY_AGCCTL_CAL, 0, false)) {
-		ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n",
+		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
 			channel->center_freq);
 		return -EAGAIN;
 	}
 
+	/*
+	 * Start noise floor calibration
+	 *
+	 * If we run NF calibration before AGC, it always times out.
+	 * Binary HAL starts NF and AGC calibration at the same time
+	 * and only waits for AGC to finish. I believe that's wrong because
+	 * during NF calibration, rx path is also routed to a detector, so if
+	 * it doesn't finish we won't have RX.
+	 *
+	 * XXX: Find an interval that's OK for all cards...
+	 */
 	ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
 	if (ret)
 		return ret;
 
-	ah->ah_calibration = false;
-
-	/* A and G modes can use QAM modulation which requires enabling
-	 * I and Q calibration. Don't bother in B mode. */
-	if (!(mode == AR5K_MODE_11B)) {
-		ah->ah_calibration = true;
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_RUN);
-	}
-
 	/*
 	 * Reset queues and start beacon timers at the end of the reset routine
 	 */
@@ -1154,6 +1192,12 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
 		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
 		ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
+
+		data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
+		data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
+						0x00000f80 : 0x00001380 ;
+		ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
+		data = 0;
 	}
 
 	if (ah->ah_version == AR5K_AR5212) {
@@ -1226,7 +1270,7 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
 		bool set_chip, u16 sleep_duration)
 {
 	unsigned int i;
-	u32 staid;
+	u32 staid, data;
 
 	ATH5K_TRACE(ah->ah_sc);
 	staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
@@ -1238,7 +1282,8 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
 	case AR5K_PM_NETWORK_SLEEP:
 		if (set_chip)
 			ath5k_hw_reg_write(ah,
-				AR5K_SLEEP_CTL_SLE | sleep_duration,
+				AR5K_SLEEP_CTL_SLE_ALLOW |
+				sleep_duration,
 				AR5K_SLEEP_CTL);
 
 		staid |= AR5K_STA_ID1_PWR_SV;
@@ -1253,13 +1298,24 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
 		break;
 
 	case AR5K_PM_AWAKE:
+
+		staid &= ~AR5K_STA_ID1_PWR_SV;
+
 		if (!set_chip)
 			goto commit;
 
-		ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE,
-				AR5K_SLEEP_CTL);
+		/* Preserve sleep duration */
+		data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+		if( data & 0xffc00000 ){
+			data = 0;
+		} else {
+			data = data & 0xfffcffff;
+		}
 
-		for (i = 5000; i > 0; i--) {
+		ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+		udelay(15);
+
+		for (i = 50; i > 0; i--) {
 			/* Check if the chip did wake up */
 			if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
 					AR5K_PCICFG_SPWR_DN) == 0)
@@ -1267,15 +1323,13 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
 
 			/* Wait a bit and retry */
 			udelay(200);
-			ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE,
-				AR5K_SLEEP_CTL);
+			ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
 		}
 
 		/* Fail if the chip didn't wake up */
 		if (i <= 0)
 			return -EIO;
 
-		staid &= ~AR5K_STA_ID1_PWR_SV;
 		break;
 
 	default:
@@ -1304,6 +1358,7 @@ void ath5k_hw_start_rx(struct ath5k_hw *ah)
 {
 	ATH5K_TRACE(ah->ah_sc);
 	ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
+	ath5k_hw_reg_read(ah, AR5K_CR);
 }
 
 /*
@@ -1390,6 +1445,7 @@ int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue)
 		}
 		/* Start queue */
 		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+		ath5k_hw_reg_read(ah, AR5K_CR);
 	} else {
 		/* Return if queue is disabled */
 		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
@@ -1440,6 +1496,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
 		/* Stop queue */
 		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+		ath5k_hw_reg_read(ah, AR5K_CR);
 	} else {
 		/*
 		 * Schedule TX disable and wait until queue is empty
@@ -1456,6 +1513,8 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
 		/* Clear register */
 		ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+		if (pending)
+			return -EBUSY;
 	}
 
 	/* TODO: Check for success else return error */
@@ -1684,6 +1743,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
 	 * (they will be re-enabled afterwards).
 	 */
 	ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
+	ath5k_hw_reg_read(ah, AR5K_IER);
 
 	old_mask = ah->ah_imr;
 
@@ -1716,6 +1776,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
 
 	/* ..re-enable interrupts */
 	ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+	ath5k_hw_reg_read(ah, AR5K_IER);
 
 	return old_mask;
 }
@@ -3359,11 +3420,13 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 		ath5k_hw_reg_write(ah, ah->ah_turbo ?
 			AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
 			AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
-		/* Set PHY register 0x9844 (??) */
+		/* Set AR5K_PHY_SETTLING */
 		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			(ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x38 :
-			(ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x1C,
-			AR5K_PHY(17));
+			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+			| 0x38 :
+			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+			| 0x1C,
+			AR5K_PHY_SETTLING);
 		/* Set Frame Control Register */
 		ath5k_hw_reg_write(ah, ah->ah_turbo ?
 			(AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
@@ -3484,7 +3547,7 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 			if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
 				AR5K_REG_ENABLE_BITS(ah,
 					AR5K_QUEUE_MISC(queue),
-					AR5K_QCU_MISC_TXE);
+					AR5K_QCU_MISC_RDY_VEOL_POLICY);
 		}
 
 		if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c
index 04c84e9da89..2806b21bf90 100644
--- a/drivers/net/wireless/ath5k/initvals.c
+++ b/drivers/net/wireless/ath5k/initvals.c
@@ -489,7 +489,7 @@ static const struct ath5k_ini ar5212_ini[] = {
 	{ AR5K_QUEUE_TXDP(9),	0x00000000 },
 	{ AR5K_DCU_FP,		0x00000000 },
 	{ AR5K_DCU_TXP,		0x00000000 },
-	{ AR5K_DCU_TX_FILTER,	0x00000000 },
+	{ AR5K_DCU_TX_FILTER_0_BASE,	0x00000000 },
 	/* Unknown table */
 	{ 0x1078, 0x00000000 },
 	{ 0x10b8, 0x00000000 },
@@ -679,7 +679,7 @@ static const struct ath5k_ini ar5212_ini[] = {
 	{ AR5K_PHY(645), 0x00106c10 },
 	{ AR5K_PHY(646), 0x009c4060 },
 	{ AR5K_PHY(647), 0x1483800a },
-	/* { AR5K_PHY(648), 0x018830c6 },*/ /* 2413 */
+	/* { AR5K_PHY(648), 0x018830c6 },*/ /* 2413/2425 */
 	{ AR5K_PHY(648), 0x01831061 },
 	{ AR5K_PHY(649), 0x00000400 },
 	/*{ AR5K_PHY(650), 0x000001b5 },*/
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index afd8689e5c0..fa0d47faf57 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -1020,6 +1020,74 @@ static const struct ath5k_ini_rfgain rfgain_2413[] = {
 	{ AR5K_RF_GAIN(63), { 0x000000f9 } },
 };
 
+/* Initial RF Gain settings for RF2425 */
+static const struct ath5k_ini_rfgain rfgain_2425[] = {
+	{ AR5K_RF_GAIN(0), { 0x00000000 } },
+	{ AR5K_RF_GAIN(1), { 0x00000040 } },
+	{ AR5K_RF_GAIN(2), { 0x00000080 } },
+	{ AR5K_RF_GAIN(3), { 0x00000181 } },
+	{ AR5K_RF_GAIN(4), { 0x000001c1 } },
+	{ AR5K_RF_GAIN(5), { 0x00000001 } },
+	{ AR5K_RF_GAIN(6), { 0x00000041 } },
+	{ AR5K_RF_GAIN(7), { 0x00000081 } },
+	{ AR5K_RF_GAIN(8), { 0x00000188 } },
+	{ AR5K_RF_GAIN(9), { 0x000001c8 } },
+	{ AR5K_RF_GAIN(10), { 0x00000008 } },
+	{ AR5K_RF_GAIN(11), { 0x00000048 } },
+	{ AR5K_RF_GAIN(12), { 0x00000088 } },
+	{ AR5K_RF_GAIN(13), { 0x00000189 } },
+	{ AR5K_RF_GAIN(14), { 0x000001c9 } },
+	{ AR5K_RF_GAIN(15), { 0x00000009 } },
+	{ AR5K_RF_GAIN(16), { 0x00000049 } },
+	{ AR5K_RF_GAIN(17), { 0x00000089 } },
+	{ AR5K_RF_GAIN(18), { 0x000001b0 } },
+	{ AR5K_RF_GAIN(19), { 0x000001f0 } },
+	{ AR5K_RF_GAIN(20), { 0x00000030 } },
+	{ AR5K_RF_GAIN(21), { 0x00000070 } },
+	{ AR5K_RF_GAIN(22), { 0x00000171 } },
+	{ AR5K_RF_GAIN(23), { 0x000001b1 } },
+	{ AR5K_RF_GAIN(24), { 0x000001f1 } },
+	{ AR5K_RF_GAIN(25), { 0x00000031 } },
+	{ AR5K_RF_GAIN(26), { 0x00000071 } },
+	{ AR5K_RF_GAIN(27), { 0x000001b8 } },
+	{ AR5K_RF_GAIN(28), { 0x000001f8 } },
+	{ AR5K_RF_GAIN(29), { 0x00000038 } },
+	{ AR5K_RF_GAIN(30), { 0x00000078 } },
+	{ AR5K_RF_GAIN(31), { 0x000000b8 } },
+	{ AR5K_RF_GAIN(32), { 0x000001b9 } },
+	{ AR5K_RF_GAIN(33), { 0x000001f9 } },
+	{ AR5K_RF_GAIN(34), { 0x00000039 } },
+	{ AR5K_RF_GAIN(35), { 0x00000079 } },
+	{ AR5K_RF_GAIN(36), { 0x000000b9 } },
+	{ AR5K_RF_GAIN(37), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(38), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(39), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(40), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(41), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(42), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(43), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(44), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(45), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(46), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(47), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(48), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(49), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(50), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(51), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(52), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(53), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(54), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(55), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(56), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(57), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(58), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(59), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(60), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(61), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(62), { 0x000000f9 } },
+	{ AR5K_RF_GAIN(63), { 0x000000f9 } },
+};
+
 static const struct ath5k_gain_opt rfgain_opt_5112 = {
 	1,
 	8,
@@ -1588,8 +1656,8 @@ int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq)
 		freq = 0; /* only 2Ghz */
 		break;
 	case AR5K_RF2425:
-		ath5k_rfg = rfgain_2413;
-		size = ARRAY_SIZE(rfgain_2413);
+		ath5k_rfg = rfgain_2425;
+		size = ARRAY_SIZE(rfgain_2425);
 		freq = 0; /* only 2Ghz */
 		break;
 	default:
@@ -1830,9 +1898,6 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
 	data = data0 = data1 = data2 = 0;
 	c = channel->center_freq;
 
-	/*
-	 * Set the channel on the RF5112 or newer
-	 */
 	if (c < 4800) {
 		if (!((c - 2224) % 5)) {
 			data0 = ((2 * (c - 704)) - 3040) / 10;
@@ -1844,7 +1909,7 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
 			return -EINVAL;
 
 		data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8);
-	} else {
+	} else if ((c - (c % 5)) != 2 || c > 5435) {
 		if (!(c % 20) && c >= 5120) {
 			data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
 			data2 = ath5k_hw_bitswap(3, 2);
@@ -1856,6 +1921,9 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
 			data2 = ath5k_hw_bitswap(1, 2);
 		} else
 			return -EINVAL;
+	} else {
+		data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8);
+		data2 = ath5k_hw_bitswap(0, 2);
 	}
 
 	data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001;
@@ -1867,6 +1935,45 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
 }
 
 /*
+ * Set the channel on the RF2425
+ */
+static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel)
+{
+	u32 data, data0, data2;
+	u16 c;
+
+	data = data0 = data2 = 0;
+	c = channel->center_freq;
+
+	if (c < 4800) {
+		data0 = ath5k_hw_bitswap((c - 2272), 8);
+		data2 = 0;
+	/* ? 5GHz ? */
+	} else if ((c - (c % 5)) != 2 || c > 5435) {
+		if (!(c % 20) && c < 5120)
+			data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
+		else if (!(c % 10))
+			data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8);
+		else if (!(c % 5))
+			data0 = ath5k_hw_bitswap((c - 4800) / 5, 8);
+		else
+			return -EINVAL;
+		data2 = ath5k_hw_bitswap(1, 2);
+	} else {
+		data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8);
+		data2 = ath5k_hw_bitswap(0, 2);
+	}
+
+	data = (data0 << 4) | data2 << 2 | 0x1001;
+
+	ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER);
+	ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5);
+
+	return 0;
+}
+
+/*
  * Set a channel on the radio chip
  */
 int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
@@ -1895,6 +2002,9 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
 	case AR5K_RF5111:
 		ret = ath5k_hw_rf5111_channel(ah, channel);
 		break;
+	case AR5K_RF2425:
+		ret = ath5k_hw_rf2425_channel(ah, channel);
+		break;
 	default:
 		ret = ath5k_hw_rf5112_channel(ah, channel);
 		break;
@@ -1903,6 +2013,15 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
 	if (ret)
 		return ret;
 
+	/* Set JAPAN setting for channel 14 */
+	if (channel->center_freq == 2484) {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL,
+				AR5K_PHY_CCKTXCTL_JAPAN);
+	} else {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL,
+				AR5K_PHY_CCKTXCTL_WORLD);
+	}
+
 	ah->ah_current_channel.center_freq = channel->center_freq;
 	ah->ah_current_channel.hw_value = channel->hw_value;
 	ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false;
@@ -1933,6 +2052,8 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
  * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \
  * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7
  *
+ * XXX: Since during noise floor calibration antennas are detached according to
+ * the patent, we should stop tx queues here.
  */
 int
 ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
@@ -1942,7 +2063,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
 	s32 noise_floor;
 
 	/*
-	 * Enable noise floor calibration and wait until completion
+	 * Enable noise floor calibration
 	 */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
 				AR5K_PHY_AGCCTL_NF);
@@ -1952,7 +2073,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
 	if (ret) {
 		ATH5K_ERR(ah->ah_sc,
 			"noise floor calibration timeout (%uMHz)\n", freq);
-		return ret;
+		return -EAGAIN;
 	}
 
 	/* Wait until the noise floor is calibrated and read the value */
@@ -1974,7 +2095,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
 	if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
 		ATH5K_ERR(ah->ah_sc,
 			"noise floor calibration failed (%uMHz)\n", freq);
-		return -EIO;
+		return -EAGAIN;
 	}
 
 	ah->ah_noise_floor = noise_floor;
@@ -2087,38 +2208,66 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
 }
 
 /*
- * Perform a PHY calibration on RF5111/5112
+ * Perform a PHY calibration on RF5111/5112 and newer chips
  */
 static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah,
 		struct ieee80211_channel *channel)
 {
 	u32 i_pwr, q_pwr;
 	s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd;
+	int i;
 	ATH5K_TRACE(ah->ah_sc);
 
 	if (!ah->ah_calibration ||
-			ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN)
+		ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN)
 		goto done;
 
-	ah->ah_calibration = false;
+	/* Calibration has finished, get the results and re-run */
+	for (i = 0; i <= 10; i++) {
+		iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
+		i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
+		q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
+	}
 
-	iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
-	i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
-	q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
 	i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7;
-	q_coffd = q_pwr >> 6;
+	q_coffd = q_pwr >> 7;
 
+	/* No correction */
 	if (i_coffd == 0 || q_coffd == 0)
 		goto done;
 
 	i_coff = ((-iq_corr) / i_coffd) & 0x3f;
-	q_coff = (((s32)i_pwr / q_coffd) - 64) & 0x1f;
 
-	/* Commit new IQ value */
+	/* Boundary check */
+	if (i_coff > 31)
+		i_coff = 31;
+	if (i_coff < -32)
+		i_coff = -32;
+
+	q_coff = (((s32)i_pwr / q_coffd) - 128) & 0x1f;
+
+	/* Boundary check */
+	if (q_coff > 15)
+		q_coff = 15;
+	if (q_coff < -16)
+		q_coff = -16;
+
+	/* Commit new I/Q value */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE |
 		((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S));
 
+	/* Re-enable calibration -if we don't we'll commit
+	 * the same values again and again */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+			AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN);
+
 done:
+
+	/* TODO: Separate noise floor calibration from I/Q calibration
+	 * since noise floor calibration interrupts rx path while I/Q
+	 * calibration doesn't. We don't need to run noise floor calibration
+	 * as often as I/Q calibration.*/
 	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
 
 	/* Request RF gain */
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 30629b3e37c..7562bf173d3 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -53,7 +53,7 @@
 #define AR5K_CR_TXD0	0x00000008	/* TX Disable for queue 0 on 5210 */
 #define AR5K_CR_TXD1	0x00000010	/* TX Disable for queue 1 on 5210 */
 #define	AR5K_CR_RXD	0x00000020	/* RX Disable */
-#define	AR5K_CR_SWI	0x00000040
+#define	AR5K_CR_SWI	0x00000040	/* Software Interrupt */
 
 /*
  * RX Descriptor Pointer register
@@ -65,19 +65,19 @@
  */
 #define	AR5K_CFG		0x0014			/* Register Address */
 #define	AR5K_CFG_SWTD		0x00000001	/* Byte-swap TX descriptor (for big endian archs) */
-#define	AR5K_CFG_SWTB		0x00000002	/* Byte-swap TX buffer (?) */
+#define	AR5K_CFG_SWTB		0x00000002	/* Byte-swap TX buffer */
 #define	AR5K_CFG_SWRD		0x00000004	/* Byte-swap RX descriptor */
-#define	AR5K_CFG_SWRB		0x00000008	/* Byte-swap RX buffer (?) */
-#define	AR5K_CFG_SWRG		0x00000010	/* Byte-swap Register values (?) */
-#define AR5K_CFG_ADHOC		0x00000020 	/* [5211+] */
+#define	AR5K_CFG_SWRB		0x00000008	/* Byte-swap RX buffer */
+#define	AR5K_CFG_SWRG		0x00000010	/* Byte-swap Register access */
+#define AR5K_CFG_ADHOC		0x00000020 	/* AP/Adhoc indication [5211+] */
 #define AR5K_CFG_PHY_OK		0x00000100	/* [5211+] */
 #define AR5K_CFG_EEBS		0x00000200	/* EEPROM is busy */
-#define	AR5K_CFG_CLKGD		0x00000400	/* Clock gated (?) */
+#define	AR5K_CFG_CLKGD		0x00000400	/* Clock gated (Disable dynamic clock) */
 #define AR5K_CFG_TXCNT		0x00007800	/* Tx frame count (?) [5210] */
 #define AR5K_CFG_TXCNT_S	11
 #define AR5K_CFG_TXFSTAT	0x00008000	/* Tx frame status (?) [5210] */
 #define AR5K_CFG_TXFSTRT	0x00010000	/* [5210] */
-#define	AR5K_CFG_PCI_THRES	0x00060000	/* [5211+] */
+#define	AR5K_CFG_PCI_THRES	0x00060000	/* PCI Master req q threshold [5211+] */
 #define	AR5K_CFG_PCI_THRES_S	17
 
 /*
@@ -162,35 +162,40 @@
 /*
  * Transmit configuration register
  */
-#define AR5K_TXCFG		0x0030			/* Register Address */
-#define AR5K_TXCFG_SDMAMR	0x00000007	/* DMA size */
-#define AR5K_TXCFG_SDMAMR_S	0
-#define AR5K_TXCFG_B_MODE	0x00000008	/* Set b mode for 5111 (enable 2111) */
-#define AR5K_TXCFG_TXFSTP	0x00000008	/* TX DMA full Stop [5210] */
-#define AR5K_TXCFG_TXFULL	0x000003f0	/* TX Triger level mask */
-#define AR5K_TXCFG_TXFULL_S	4
-#define AR5K_TXCFG_TXFULL_0B	0x00000000
-#define AR5K_TXCFG_TXFULL_64B	0x00000010
-#define AR5K_TXCFG_TXFULL_128B	0x00000020
-#define AR5K_TXCFG_TXFULL_192B	0x00000030
-#define AR5K_TXCFG_TXFULL_256B	0x00000040
-#define AR5K_TXCFG_TXCONT_EN	0x00000080
-#define AR5K_TXCFG_DMASIZE	0x00000100	/* Flag for passing DMA size [5210] */
-#define AR5K_TXCFG_JUMBO_TXE	0x00000400	/* Enable jumbo frames transmition (?) [5211+] */
-#define AR5K_TXCFG_RTSRND	0x00001000	/* [5211+] */
-#define AR5K_TXCFG_FRMPAD_DIS	0x00002000	/* [5211+] */
-#define AR5K_TXCFG_RDY_DIS	0x00004000	/* [5211+] */
+#define AR5K_TXCFG			0x0030			/* Register Address */
+#define AR5K_TXCFG_SDMAMR		0x00000007	/* DMA size (read) */
+#define AR5K_TXCFG_SDMAMR_S		0
+#define AR5K_TXCFG_B_MODE		0x00000008	/* Set b mode for 5111 (enable 2111) */
+#define AR5K_TXCFG_TXFSTP		0x00000008	/* TX DMA full Stop [5210] */
+#define AR5K_TXCFG_TXFULL		0x000003f0	/* TX Triger level mask */
+#define AR5K_TXCFG_TXFULL_S		4
+#define AR5K_TXCFG_TXFULL_0B		0x00000000
+#define AR5K_TXCFG_TXFULL_64B		0x00000010
+#define AR5K_TXCFG_TXFULL_128B		0x00000020
+#define AR5K_TXCFG_TXFULL_192B		0x00000030
+#define AR5K_TXCFG_TXFULL_256B		0x00000040
+#define AR5K_TXCFG_TXCONT_EN		0x00000080
+#define AR5K_TXCFG_DMASIZE		0x00000100	/* Flag for passing DMA size [5210] */
+#define AR5K_TXCFG_JUMBO_DESC_EN	0x00000400	/* Enable jumbo tx descriptors [5211+] */
+#define AR5K_TXCFG_ADHOC_BCN_ATIM	0x00000800	/* Adhoc Beacon ATIM Policy */
+#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS	0x00001000	/* Disable ATIM window defer [5211+] */
+#define AR5K_TXCFG_RTSRND		0x00001000	/* [5211+] */
+#define AR5K_TXCFG_FRMPAD_DIS		0x00002000	/* [5211+] */
+#define AR5K_TXCFG_RDY_CBR_DIS		0x00004000	/* Ready time CBR disable [5211+] */
+#define AR5K_TXCFG_JUMBO_FRM_MODE	0x00008000	/* Jumbo frame mode [5211+] */
+#define AR5K_TXCFG_DCU_CACHING_DIS	0x00010000	/* Disable DCU caching */
 
 /*
  * Receive configuration register
  */
 #define AR5K_RXCFG		0x0034			/* Register Address */
-#define AR5K_RXCFG_SDMAMW	0x00000007	/* DMA size */
+#define AR5K_RXCFG_SDMAMW	0x00000007	/* DMA size (write) */
 #define AR5K_RXCFG_SDMAMW_S	0
-#define	AR5K_RXCFG_DEF_ANTENNA	0x00000008	/* Default antenna */
-#define AR5K_RXCFG_ZLFDMA	0x00000010	/* Zero-length DMA */
-#define AR5K_RXCFG_JUMBO_RXE	0x00000020	/* Enable jumbo frames reception (?) [5211+] */
-#define AR5K_RXCFG_JUMBO_WRAP	0x00000040	/* Wrap jumbo frames (?) [5211+] */
+#define AR5K_RXCFG_ZLFDMA	0x00000008	/* Enable Zero-length frame DMA */
+#define	AR5K_RXCFG_DEF_ANTENNA	0x00000010	/* Default antenna (?) */
+#define AR5K_RXCFG_JUMBO_RXE	0x00000020	/* Enable jumbo rx descriptors [5211+] */
+#define AR5K_RXCFG_JUMBO_WRAP	0x00000040	/* Wrap jumbo frames [5211+] */
+#define AR5K_RXCFG_SLE_ENTRY	0x00000080	/* Sleep entry policy */
 
 /*
  * Receive jumbo descriptor last address register
@@ -202,35 +207,35 @@
  * MIB control register
  */
 #define AR5K_MIBC		0x0040			/* Register Address */
-#define AR5K_MIBC_COW		0x00000001
-#define AR5K_MIBC_FMC		0x00000002	/* Freeze Mib Counters (?) */
-#define AR5K_MIBC_CMC		0x00000004	/* Clean Mib Counters (?) */
-#define AR5K_MIBC_MCS		0x00000008
+#define AR5K_MIBC_COW		0x00000001	/* Warn test indicator */
+#define AR5K_MIBC_FMC		0x00000002	/* Freeze MIB Counters  */
+#define AR5K_MIBC_CMC		0x00000004	/* Clean MIB Counters  */
+#define AR5K_MIBC_MCS		0x00000008	/* MIB counter strobe */
 
 /*
  * Timeout prescale register
  */
 #define AR5K_TOPS		0x0044
-#define	AR5K_TOPS_M		0x0000ffff	/* [5211+] (?) */
+#define	AR5K_TOPS_M		0x0000ffff
 
 /*
  * Receive timeout register (no frame received)
  */
 #define AR5K_RXNOFRM		0x0048
-#define	AR5K_RXNOFRM_M		0x000003ff	/* [5211+] (?) */
+#define	AR5K_RXNOFRM_M		0x000003ff
 
 /*
  * Transmit timeout register (no frame sent)
  */
 #define AR5K_TXNOFRM		0x004c
-#define	AR5K_TXNOFRM_M		0x000003ff	/* [5211+] (?) */
-#define	AR5K_TXNOFRM_QCU	0x000ffc00	/* [5211+] (?) */
+#define	AR5K_TXNOFRM_M		0x000003ff
+#define	AR5K_TXNOFRM_QCU	0x000ffc00
 
 /*
  * Receive frame gap timeout register
  */
 #define AR5K_RPGTO		0x0050
-#define AR5K_RPGTO_M		0x000003ff	/* [5211+] (?) */
+#define AR5K_RPGTO_M		0x000003ff
 
 /*
  * Receive frame count limit register
@@ -241,6 +246,7 @@
 
 /*
  * Misc settings register
+ * (reserved0-3)
  */
 #define AR5K_MISC		0x0058			/* Register Address */
 #define	AR5K_MISC_DMA_OBS_M	0x000001e0
@@ -256,6 +262,7 @@
 
 /*
  * QCU/DCU clock gating register (5311)
+ * (reserved4-5)
  */
 #define	AR5K_QCUDCU_CLKGT	0x005c			/* Register Address (?) */
 #define	AR5K_QCUDCU_CLKGT_QCU	0x0000ffff	/* Mask for QCU clock */
@@ -284,18 +291,18 @@
 #define AR5K_ISR_TXEOL		0x00000400	/* Empty TX descriptor */
 #define AR5K_ISR_TXURN		0x00000800	/* Transmit FIFO underrun */
 #define AR5K_ISR_MIB		0x00001000	/* Update MIB counters */
-#define AR5K_ISR_SWI		0x00002000	/* Software interrupt (?) */
+#define AR5K_ISR_SWI		0x00002000	/* Software interrupt */
 #define AR5K_ISR_RXPHY		0x00004000	/* PHY error */
-#define AR5K_ISR_RXKCM		0x00008000
+#define AR5K_ISR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_ISR_SWBA		0x00010000	/* Software beacon alert */
 #define AR5K_ISR_BRSSI		0x00020000
 #define AR5K_ISR_BMISS		0x00040000	/* Beacon missed */
 #define AR5K_ISR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_ISR_BNR		0x00100000 	/* Beacon not ready [5211+] */
-#define AR5K_ISR_MCABT		0x00100000	/* [5210] */
-#define AR5K_ISR_RXCHIRP	0x00200000	/* [5212+] */
-#define AR5K_ISR_SSERR		0x00200000	/* [5210] */
-#define AR5K_ISR_DPERR		0x00400000	/* [5210] */
+#define AR5K_ISR_MCABT		0x00100000	/* Master Cycle Abort [5210] */
+#define AR5K_ISR_RXCHIRP	0x00200000	/* CHIRP Received [5212+] */
+#define AR5K_ISR_SSERR		0x00200000	/* Signaled System Error [5210] */
+#define AR5K_ISR_DPERR		0x00400000	/* Det par Error (?) [5210] */
 #define AR5K_ISR_TIM		0x00800000	/* [5210] */
 #define AR5K_ISR_BCNMISC	0x00800000	/* [5212+] */
 #define AR5K_ISR_GPIO		0x01000000	/* GPIO (rf kill)*/
@@ -320,14 +327,14 @@
 
 #define AR5K_SISR2		0x008c			/* Register Address [5211+] */
 #define AR5K_SISR2_QCU_TXURN	0x000003ff	/* Mask for QCU_TXURN */
-#define	AR5K_SISR2_MCABT	0x00100000
-#define	AR5K_SISR2_SSERR	0x00200000
-#define	AR5K_SISR2_DPERR	0x00400000
+#define	AR5K_SISR2_MCABT	0x00100000	/* Master Cycle Abort */
+#define	AR5K_SISR2_SSERR	0x00200000	/* Signaled System Error */
+#define	AR5K_SISR2_DPERR	0x00400000	/* Det par Error (?) */
 #define	AR5K_SISR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SISR2_CAB_END	0x02000000	/* [5212+] */
-#define	AR5K_SISR2_DTIM_SYNC	0x04000000	/* [5212+] */
-#define	AR5K_SISR2_BCN_TIMEOUT	0x08000000	/* [5212+] */
-#define	AR5K_SISR2_CAB_TIMEOUT	0x10000000	/* [5212+] */
+#define	AR5K_SISR2_DTIM_SYNC	0x04000000	/* DTIM sync lost [5212+] */
+#define	AR5K_SISR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
+#define	AR5K_SISR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SISR2_DTIM		0x20000000	/* [5212+] */
 
 #define AR5K_SISR3		0x0090			/* Register Address [5211+] */
@@ -368,18 +375,18 @@
 #define AR5K_IMR_TXEOL		0x00000400	/* Empty TX descriptor*/
 #define AR5K_IMR_TXURN		0x00000800	/* Transmit FIFO underrun*/
 #define AR5K_IMR_MIB		0x00001000	/* Update MIB counters*/
-#define AR5K_IMR_SWI		0x00002000
+#define AR5K_IMR_SWI		0x00002000	/* Software interrupt */
 #define AR5K_IMR_RXPHY		0x00004000	/* PHY error*/
-#define AR5K_IMR_RXKCM		0x00008000
+#define AR5K_IMR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_IMR_SWBA		0x00010000	/* Software beacon alert*/
 #define AR5K_IMR_BRSSI		0x00020000
 #define AR5K_IMR_BMISS		0x00040000	/* Beacon missed*/
 #define AR5K_IMR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_IMR_BNR		0x00100000 	/* Beacon not ready [5211+] */
-#define AR5K_IMR_MCABT		0x00100000	/* [5210] */
-#define AR5K_IMR_RXCHIRP	0x00200000	/* [5212+]*/
-#define AR5K_IMR_SSERR		0x00200000	/* [5210] */
-#define AR5K_IMR_DPERR		0x00400000	/* [5210] */
+#define AR5K_IMR_MCABT		0x00100000	/* Master Cycle Abort [5210] */
+#define AR5K_IMR_RXCHIRP	0x00200000	/* CHIRP Received [5212+]*/
+#define AR5K_IMR_SSERR		0x00200000	/* Signaled System Error [5210] */
+#define AR5K_IMR_DPERR		0x00400000	/* Det par Error (?) [5210] */
 #define AR5K_IMR_TIM		0x00800000	/* [5211+] */
 #define AR5K_IMR_BCNMISC	0x00800000	/* [5212+] */
 #define AR5K_IMR_GPIO		0x01000000	/* GPIO (rf kill)*/
@@ -405,14 +412,14 @@
 #define AR5K_SIMR2		0x00ac			/* Register Address [5211+] */
 #define AR5K_SIMR2_QCU_TXURN	0x000003ff	/* Mask for QCU_TXURN */
 #define AR5K_SIMR2_QCU_TXURN_S	0
-#define	AR5K_SIMR2_MCABT	0x00100000
-#define	AR5K_SIMR2_SSERR	0x00200000
-#define	AR5K_SIMR2_DPERR	0x00400000
+#define	AR5K_SIMR2_MCABT	0x00100000	/* Master Cycle Abort */
+#define	AR5K_SIMR2_SSERR	0x00200000	/* Signaled System Error */
+#define	AR5K_SIMR2_DPERR	0x00400000	/* Det par Error (?) */
 #define	AR5K_SIMR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SIMR2_CAB_END	0x02000000	/* [5212+] */
-#define	AR5K_SIMR2_DTIM_SYNC	0x04000000	/* [5212+] */
-#define	AR5K_SIMR2_BCN_TIMEOUT	0x08000000	/* [5212+] */
-#define	AR5K_SIMR2_CAB_TIMEOUT	0x10000000	/* [5212+] */
+#define	AR5K_SIMR2_DTIM_SYNC	0x04000000	/* DTIM Sync lost [5212+] */
+#define	AR5K_SIMR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
+#define	AR5K_SIMR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SIMR2_DTIM		0x20000000	/* [5212+] */
 
 #define AR5K_SIMR3		0x00b0			/* Register Address [5211+] */
@@ -425,23 +432,69 @@
 #define AR5K_SIMR4_QTRIG	0x000003ff	/* Mask for QTRIG */
 #define AR5K_SIMR4_QTRIG_S	0
 
+/*
+ * DMA Debug registers 0-7
+ * 0xe0 - 0xfc
+ */
 
 /*
  * Decompression mask registers [5212+]
  */
-#define AR5K_DCM_ADDR		0x0400		/*Decompression mask address (?)*/
-#define AR5K_DCM_DATA		0x0404		/*Decompression mask data (?)*/
+#define AR5K_DCM_ADDR		0x0400		/*Decompression mask address (index) */
+#define AR5K_DCM_DATA		0x0404		/*Decompression mask data */
+
+/*
+ * Wake On Wireless pattern control register [5212+]
+ */
+#define	AR5K_WOW_PCFG			0x0410			/* Register Address */
+#define	AR5K_WOW_PCFG_PAT_MATCH_EN	0x00000001	/* Pattern match enable */
+#define	AR5K_WOW_PCFG_LONG_FRAME_POL	0x00000002	/* Long frame policy */
+#define	AR5K_WOW_PCFG_WOBMISS		0x00000004	/* Wake on bea(con) miss (?) */
+#define	AR5K_WOW_PCFG_PAT_0_EN		0x00000100	/* Enable pattern 0 */
+#define	AR5K_WOW_PCFG_PAT_1_EN		0x00000200	/* Enable pattern 1 */
+#define	AR5K_WOW_PCFG_PAT_2_EN		0x00000400	/* Enable pattern 2 */
+#define	AR5K_WOW_PCFG_PAT_3_EN		0x00000800	/* Enable pattern 3 */
+#define	AR5K_WOW_PCFG_PAT_4_EN		0x00001000	/* Enable pattern 4 */
+#define	AR5K_WOW_PCFG_PAT_5_EN		0x00002000	/* Enable pattern 5 */
+
+/*
+ * Wake On Wireless pattern index register (?) [5212+]
+ */
+#define	AR5K_WOW_PAT_IDX	0x0414
+
+/*
+ * Wake On Wireless pattern data register [5212+]
+ */
+#define	AR5K_WOW_PAT_DATA	0x0418			/* Register Address */
+#define	AR5K_WOW_PAT_DATA_0_3_V	0x00000001	/* Pattern 0, 3 value */
+#define	AR5K_WOW_PAT_DATA_1_4_V	0x00000100	/* Pattern 1, 4 value */
+#define	AR5K_WOW_PAT_DATA_2_5_V	0x00010000	/* Pattern 2, 5 value */
+#define	AR5K_WOW_PAT_DATA_0_3_M	0x01000000	/* Pattern 0, 3 mask */
+#define	AR5K_WOW_PAT_DATA_1_4_M	0x04000000	/* Pattern 1, 4 mask */
+#define	AR5K_WOW_PAT_DATA_2_5_M	0x10000000	/* Pattern 2, 5 mask */
 
 /*
  * Decompression configuration registers [5212+]
  */
-#define AR5K_DCCFG		0x0420
+#define AR5K_DCCFG		0x0420			/* Register Address */
+#define AR5K_DCCFG_GLOBAL_EN	0x00000001	/* Enable decompression on all queues */
+#define AR5K_DCCFG_BYPASS_EN	0x00000002	/* Bypass decompression */
+#define AR5K_DCCFG_BCAST_EN	0x00000004	/* Enable decompression for bcast frames */
+#define AR5K_DCCFG_MCAST_EN	0x00000008	/* Enable decompression for mcast frames */
 
 /*
  * Compression configuration registers [5212+]
  */
-#define AR5K_CCFG		0x0600
-#define AR5K_CCFG_CUP		0x0604
+#define AR5K_CCFG		0x0600			/* Register Address */
+#define	AR5K_CCFG_WINDOW_SIZE	0x00000007	/* Compression window size */
+#define	AR5K_CCFG_CPC_EN	0x00000008	/* Enable performance counters */
+
+#define AR5K_CCFG_CCU		0x0604			/* Register Address */
+#define AR5K_CCFG_CCU_CUP_EN	0x00000001	/* CCU Catchup enable */
+#define AR5K_CCFG_CCU_CREDIT	0x00000002	/* CCU Credit (field) */
+#define AR5K_CCFG_CCU_CD_THRES	0x00000080	/* CCU Cyc(lic?) debt threshold (field) */
+#define AR5K_CCFG_CCU_CUP_LCNT	0x00010000	/* CCU Catchup lit(?) count */
+#define	AR5K_CCFG_CCU_INIT	0x00100200	/* Initial value during reset */
 
 /*
  * Compression performance counter registers [5212+]
@@ -450,7 +503,7 @@
 #define AR5K_CPC1		0x0614		/* Compression performance counter 1*/
 #define AR5K_CPC2		0x0618		/* Compression performance counter 2 */
 #define AR5K_CPC3		0x061c		/* Compression performance counter 3 */
-#define AR5K_CPCORN		0x0620		/* Compression performance overrun (?) */
+#define AR5K_CPCOVF		0x0620		/* Compression performance overflow */
 
 
 /*
@@ -466,8 +519,6 @@
  * set/clear, which contain status for all queues (we shift by 1 for each
  * queue). To access these registers easily we define some macros here
  * that are used inside HAL. For more infos check out *_tx_queue functs.
- *
- * TODO: Boundary checking on macros (here?)
  */
 
 /*
@@ -513,7 +564,6 @@
 #define	AR5K_QCU_RDYTIMECFG_BASE	0x0900	/* Register Address - Queue0 RDYTIMECFG */
 #define	AR5K_QCU_RDYTIMECFG_INTVAL	0x00ffffff	/* Ready time interval mask */
 #define AR5K_QCU_RDYTIMECFG_INTVAL_S	0
-#define	AR5K_QCU_RDYTIMECFG_DURATION	0x00ffffff	/* Ready time duration mask */
 #define	AR5K_QCU_RDYTIMECFG_ENABLE	0x01000000	/* Ready time enable mask */
 #define AR5K_QUEUE_RDYTIMECFG(_q)	AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q)
 
@@ -534,19 +584,20 @@
  */
 #define AR5K_QCU_MISC_BASE		0x09c0			/* Register Address -Queue0 MISC */
 #define	AR5K_QCU_MISC_FRSHED_M		0x0000000f	/* Frame sheduling mask */
-#define	AR5K_QCU_MISC_FRSHED_ASAP	0		/* ASAP */
-#define	AR5K_QCU_MISC_FRSHED_CBR	1		/* Constant Bit Rate */
-#define	AR5K_QCU_MISC_FRSHED_DBA_GT	2		/* DMA Beacon alert gated (?) */
-#define	AR5K_QCU_MISC_FRSHED_TIM_GT	3		/* Time gated (?) */
+#define	AR5K_QCU_MISC_FRSHED_ASAP		0	/* ASAP */
+#define	AR5K_QCU_MISC_FRSHED_CBR		1	/* Constant Bit Rate */
+#define	AR5K_QCU_MISC_FRSHED_DBA_GT		2	/* DMA Beacon alert gated (?) */
+#define	AR5K_QCU_MISC_FRSHED_TIM_GT		3	/* Time gated (?) */
 #define	AR5K_QCU_MISC_FRSHED_BCN_SENT_GT	4	/* Beacon sent gated (?) */
 #define	AR5K_QCU_MISC_ONESHOT_ENABLE	0x00000010	/* Oneshot enable */
 #define	AR5K_QCU_MISC_CBREXP		0x00000020	/* CBR expired (normal queue) */
 #define	AR5K_QCU_MISC_CBREXP_BCN	0x00000040	/* CBR expired (beacon queue) */
-#define	AR5K_QCU_MISC_BCN_ENABLE	0x00000080	/* Beacons enabled */
-#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR threshold enabled (?) */
-#define	AR5K_QCU_MISC_TXE		0x00000200	/* TXE reset when RDYTIME enalbed (?) */
-#define	AR5K_QCU_MISC_CBR		0x00000400	/* CBR threshold reset (?) */
-#define	AR5K_QCU_MISC_DCU_EARLY		0x00000800	/* DCU reset (?) */
+#define	AR5K_QCU_MISC_BCN_ENABLE	0x00000080	/* Enable Beacon use */
+#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR threshold enabled */
+#define	AR5K_QCU_MISC_RDY_VEOL_POLICY	0x00000200	/* TXE reset when RDYTIME enalbed */
+#define	AR5K_QCU_MISC_CBR_RESET_CNT	0x00000400	/* CBR threshold (counter) reset */
+#define	AR5K_QCU_MISC_DCU_EARLY		0x00000800	/* DCU early termination */
+#define AR5K_QCU_MISC_DCU_CMP_EN	0x00001000	/* Enable frame compression */
 #define AR5K_QUEUE_MISC(_q)		AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q)
 
 
@@ -555,7 +606,7 @@
  */
 #define AR5K_QCU_STS_BASE	0x0a00			/* Register Address - Queue0 STS */
 #define	AR5K_QCU_STS_FRMPENDCNT	0x00000003	/* Frames pending counter */
-#define	AR5K_QCU_STS_CBREXPCNT	0x0000ff00	/* CBR expired counter (?) */
+#define	AR5K_QCU_STS_CBREXPCNT	0x0000ff00	/* CBR expired counter */
 #define	AR5K_QUEUE_STATUS(_q)	AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q)
 
 /*
@@ -569,9 +620,11 @@
  */
 #define AR5K_QCU_CBB_SELECT	0x0b00
 #define AR5K_QCU_CBB_ADDR	0x0b04
+#define AR5K_QCU_CBB_ADDR_S	9
 
 /*
  * QCU compression buffer configuration register [5212+]
+ * (buffer size)
  */
 #define AR5K_QCU_CBCFG		0x0b08
 
@@ -652,80 +705,100 @@
  * No lockout means there is no special handling.
  */
 #define AR5K_DCU_MISC_BASE		0x1100			/* Register Address -Queue0 DCU_MISC */
-#define	AR5K_DCU_MISC_BACKOFF		0x000007ff	/* Mask for backoff setting (?) */
+#define	AR5K_DCU_MISC_BACKOFF		0x000007ff	/* Mask for backoff threshold */
 #define AR5K_DCU_MISC_BACKOFF_FRAG	0x00000200	/* Enable backoff while bursting */
-#define	AR5K_DCU_MISC_HCFPOLL_ENABLE	0x00000800	/* CF - Poll (?) */
-#define	AR5K_DCU_MISC_BACKOFF_PERSIST	0x00001000	/* Persistent backoff (?) */
-#define	AR5K_DCU_MISC_FRMPRFTCH_ENABLE	0x00002000	/* Enable frame pre-fetch (?) */
+#define	AR5K_DCU_MISC_HCFPOLL_ENABLE	0x00000800	/* CF - Poll enable */
+#define	AR5K_DCU_MISC_BACKOFF_PERSIST	0x00001000	/* Persistent backoff */
+#define	AR5K_DCU_MISC_FRMPRFTCH_ENABLE	0x00002000	/* Enable frame pre-fetch */
 #define	AR5K_DCU_MISC_VIRTCOL		0x0000c000	/* Mask for Virtual Collision (?) */
-#define	AR5K_DCU_MISC_VIRTCOL_NORMAL	0
-#define	AR5K_DCU_MISC_VIRTCOL_MODIFIED	1
-#define	AR5K_DCU_MISC_VIRTCOL_IGNORE	2
-#define	AR5K_DCU_MISC_BCN_ENABLE	0x00010000	/* Beacon enable (?) */
+#define	AR5K_DCU_MISC_VIRTCOL_NORMAL		0
+#define	AR5K_DCU_MISC_VIRTCOL_MODIFIED		1
+#define	AR5K_DCU_MISC_VIRTCOL_IGNORE		2
+#define	AR5K_DCU_MISC_BCN_ENABLE	0x00010000	/* Enable Beacon use */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL	0x00060000	/* Arbiter lockout control mask */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_S	17
-#define	AR5K_DCU_MISC_ARBLOCK_CTL_NONE	0		/* No arbiter lockout */
+#define	AR5K_DCU_MISC_ARBLOCK_CTL_NONE		0	/* No arbiter lockout */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM	1	/* Intra-frame lockout */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL	2	/* Global lockout */
-#define	AR5K_DCU_MISC_ARBLOCK_IGNORE	0x00080000
-#define	AR5K_DCU_MISC_SEQ_NUM_INCR_DIS	0x00100000	/* Disable sequence number increment (?) */
-#define	AR5K_DCU_MISC_POST_FR_BKOFF_DIS	0x00200000	/* Disable post-frame backoff (?) */
-#define	AR5K_DCU_MISC_VIRT_COLL_POLICY	0x00400000	/* Virtual Collision policy (?) */
-#define	AR5K_DCU_MISC_BLOWN_IFS_POLICY	0x00800000
+#define	AR5K_DCU_MISC_ARBLOCK_IGNORE	0x00080000	/* Ignore Arbiter lockout */
+#define	AR5K_DCU_MISC_SEQ_NUM_INCR_DIS	0x00100000	/* Disable sequence number increment */
+#define	AR5K_DCU_MISC_POST_FR_BKOFF_DIS	0x00200000	/* Disable post-frame backoff */
+#define	AR5K_DCU_MISC_VIRT_COLL_POLICY	0x00400000	/* Virtual Collision cw policy */
+#define	AR5K_DCU_MISC_BLOWN_IFS_POLICY	0x00800000	/* Blown IFS policy (?) */
 #define	AR5K_DCU_MISC_SEQNUM_CTL	0x01000000	/* Sequence number control (?) */
 #define AR5K_QUEUE_DFS_MISC(_q)		AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q)
 
 /*
  * DCU frame sequence number registers
  */
-#define AR5K_DCU_SEQNUM_BASE	0x1140
-#define	AR5K_DCU_SEQNUM_M	0x00000fff
+#define AR5K_DCU_SEQNUM_BASE		0x1140
+#define	AR5K_DCU_SEQNUM_M		0x00000fff
 #define	AR5K_QUEUE_DFS_SEQNUM(_q)	AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q)
 
 /*
- * DCU global IFS SIFS registers
+ * DCU global IFS SIFS register
  */
 #define AR5K_DCU_GBL_IFS_SIFS	0x1030
 #define AR5K_DCU_GBL_IFS_SIFS_M	0x0000ffff
 
 /*
- * DCU global IFS slot interval registers
+ * DCU global IFS slot interval register
  */
 #define AR5K_DCU_GBL_IFS_SLOT	0x1070
 #define AR5K_DCU_GBL_IFS_SLOT_M	0x0000ffff
 
 /*
- * DCU global IFS EIFS registers
+ * DCU global IFS EIFS register
  */
 #define AR5K_DCU_GBL_IFS_EIFS	0x10b0
 #define AR5K_DCU_GBL_IFS_EIFS_M	0x0000ffff
 
 /*
- * DCU global IFS misc registers
+ * DCU global IFS misc register
+ *
+ * LFSR stands for Linear Feedback Shift Register
+ * and it's used for generating pseudo-random
+ * number sequences.
+ *
+ * (If i understand corectly, random numbers are
+ * used for idle sensing -multiplied with cwmin/max etc-)
  */
 #define AR5K_DCU_GBL_IFS_MISC			0x10f0			/* Register Address */
-#define	AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE	0x00000007
-#define	AR5K_DCU_GBL_IFS_MISC_TURBO_MODE	0x00000008	/* Turbo mode (?) */
-#define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC	0x000003f0	/* SIFS Duration mask (?) */
-#define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR		0x000ffc00
-#define	AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY	0x00300000
+#define	AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE	0x00000007	/* LFSR Slice Select */
+#define	AR5K_DCU_GBL_IFS_MISC_TURBO_MODE	0x00000008	/* Turbo mode */
+#define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC	0x000003f0	/* SIFS Duration mask */
+#define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR		0x000ffc00	/* USEC Duration mask */
+#define	AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY	0x00300000	/* DCU Arbiter delay mask */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST	0x00400000	/* SIFC cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST	0x00800000	/* AIFS cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS	0x01000000	/* Disable random LFSR slice */
 
 /*
  * DCU frame prefetch control register
  */
-#define AR5K_DCU_FP		0x1230
+#define AR5K_DCU_FP			0x1230			/* Register Address */
+#define AR5K_DCU_FP_NOBURST_DCU_EN	0x00000001	/* Enable non-burst prefetch on DCU (?) */
+#define AR5K_DCU_FP_NOBURST_EN		0x00000010	/* Enable non-burst prefetch (?) */
+#define AR5K_DCU_FP_BURST_DCU_EN	0x00000020	/* Enable burst prefetch on DCU (?) */
 
 /*
  * DCU transmit pause control/status register
  */
 #define AR5K_DCU_TXP		0x1270			/* Register Address */
-#define	AR5K_DCU_TXP_M		0x000003ff	/* Tx pause mask (?) */
-#define	AR5K_DCU_TXP_STATUS	0x00010000	/* Tx pause status (?) */
+#define	AR5K_DCU_TXP_M		0x000003ff	/* Tx pause mask */
+#define	AR5K_DCU_TXP_STATUS	0x00010000	/* Tx pause status */
+
+/*
+ * DCU transmit filter table 0 (32 entries)
+ */
+#define AR5K_DCU_TX_FILTER_0_BASE	0x1038
+#define	AR5K_DCU_TX_FILTER_0(_n)	(AR5K_DCU_TX_FILTER_0_BASE + (_n * 64))
 
 /*
- * DCU transmit filter register
+ * DCU transmit filter table 1 (16 entries)
  */
-#define AR5K_DCU_TX_FILTER	0x1038
+#define AR5K_DCU_TX_FILTER_1_BASE	0x103c
+#define	AR5K_DCU_TX_FILTER_1(_n)	(AR5K_DCU_TX_FILTER_1_BASE + ((_n - 32) * 64))
 
 /*
  * DCU clear transmit filter register
@@ -739,9 +812,6 @@
 
 /*
  * Reset control register
- *
- * 4 and 8 are not used in 5211/5212 and
- * 2 means "baseband reset" on 5211/5212.
  */
 #define AR5K_RESET_CTL		0x4000			/* Register Address */
 #define AR5K_RESET_CTL_PCU	0x00000001	/* Protocol Control Unit reset */
@@ -765,6 +835,7 @@
 #define AR5K_SLEEP_CTL_SLE_SLP		0x00010000	/* Force chip sleep */
 #define AR5K_SLEEP_CTL_SLE_ALLOW	0x00020000
 #define AR5K_SLEEP_CTL_SLE_UNITS	0x00000008	/* [5211+] */
+/* more bits */
 
 /*
  * Interrupt pending register
@@ -776,13 +847,14 @@
  * Sleep force register
  */
 #define AR5K_SFR	0x400c
-#define AR5K_SFR_M	0x00000001
+#define AR5K_SFR_EN	0x00000001
 
 /*
  * PCI configuration register
  */
 #define AR5K_PCICFG			0x4010			/* Register Address */
 #define AR5K_PCICFG_EEAE		0x00000001	/* Eeprom access enable [5210] */
+#define	AR5K_PCICFG_SLEEP_CLOCK_EN	0x00000002	/* Enable sleep clock (?) */
 #define AR5K_PCICFG_CLKRUNEN		0x00000004	/* CLKRUN enable [5211+] */
 #define AR5K_PCICFG_EESIZE		0x00000018	/* Mask for EEPROM size [5211+] */
 #define AR5K_PCICFG_EESIZE_S		3
@@ -798,19 +870,21 @@
 #define	AR5K_PCICFG_CBEFIX_DIS		0x00000400	/* Disable CBE fix (?) */
 #define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep (?) */
 #define AR5K_PCICFG_LED_BCTL		0x00001000	/* Led blink (?) [5210] */
-#define AR5K_PCICFG_SL_INPEN		0x00002800	/* Sleep even whith pending interrupts (?) */
+#define	AR5K_PCICFG_UNK			0x00001000	/* Passed on some parts durring attach (?) */
+#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts (?) */
 #define AR5K_PCICFG_SPWR_DN		0x00010000	/* Mask for power status */
 #define AR5K_PCICFG_LEDMODE		0x000e0000	/* Ledmode [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROP	0x00000000	/* Blink on standard traffic [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROM	0x00020000	/* Default mode (blink on any traffic) [5211+] */
 #define AR5K_PCICFG_LEDMODE_PWR		0x00040000	/* Some other blinking mode  (?) [5211+] */
 #define AR5K_PCICFG_LEDMODE_RAND	0x00060000	/* Random blinking (?) [5211+] */
-#define AR5K_PCICFG_LEDBLINK		0x00700000
+#define AR5K_PCICFG_LEDBLINK		0x00700000	/* Led blink rate */
 #define AR5K_PCICFG_LEDBLINK_S		20
-#define AR5K_PCICFG_LEDSLOW		0x00800000	/* Slow led blink rate (?) [5211+] */
+#define AR5K_PCICFG_LEDSLOW		0x00800000	/* Slowest led blink rate [5211+] */
 #define AR5K_PCICFG_LEDSTATE				\
 	(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE |	\
 	AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
+#define	AR5K_PCICFG_SLEEP_CLOCK_RATE	0x03000000	/* Sleep clock rate (field) */
 
 /*
  * "General Purpose Input/Output" (GPIO) control register
@@ -947,7 +1021,7 @@
 #define AR5K_EEPROM_VERSION_4_4		0x4004
 #define AR5K_EEPROM_VERSION_4_5		0x4005
 #define AR5K_EEPROM_VERSION_4_6		0x4006	/* has ee_scaled_cck_delta */
-#define AR5K_EEPROM_VERSION_4_7		0x3007
+#define AR5K_EEPROM_VERSION_4_7		0x4007
 
 #define AR5K_EEPROM_MODE_11A		0
 #define AR5K_EEPROM_MODE_11B		1
@@ -1023,10 +1097,14 @@
 #define AR5K_EEPROM_STAT_WRDONE	0x00000008	/* EEPROM write successful */
 
 /*
- * EEPROM config register (?)
+ * EEPROM config register
  */
-#define AR5K_EEPROM_CFG	0x6010
-
+#define AR5K_EEPROM_CFG			0x6010			/* Register Addres */
+#define AR5K_EEPROM_CFG_SIZE_OVR	0x00000001
+#define AR5K_EEPROM_CFG_WR_WAIT_DIS	0x00000004	/* Disable write wait */
+#define AR5K_EEPROM_CFG_CLK_RATE	0x00000018	/* Clock rate */
+#define AR5K_EEPROM_CFG_PROT_KEY	0x00ffff00	/* Protectio key */
+#define AR5K_EEPROM_CFG_LIND_EN		0x01000000	/* Enable length indicator (?) */
 
 
 /*
@@ -1050,7 +1128,7 @@
 #define AR5K_STA_ID1			0x8004			/* Register Address */
 #define AR5K_STA_ID1_AP			0x00010000	/* Set AP mode */
 #define AR5K_STA_ID1_ADHOC		0x00020000	/* Set Ad-Hoc mode */
-#define AR5K_STA_ID1_PWR_SV		0x00040000	/* Power save reporting (?) */
+#define AR5K_STA_ID1_PWR_SV		0x00040000	/* Power save reporting */
 #define AR5K_STA_ID1_NO_KEYSRCH		0x00080000	/* No key search */
 #define AR5K_STA_ID1_NO_PSPOLL		0x00100000	/* No power save polling [5210] */
 #define AR5K_STA_ID1_PCF_5211		0x00100000	/* Enable PCF on [5211+] */
@@ -1059,9 +1137,13 @@
 					AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211)
 #define AR5K_STA_ID1_DEFAULT_ANTENNA	0x00200000	/* Use default antenna */
 #define AR5K_STA_ID1_DESC_ANTENNA	0x00400000	/* Update antenna from descriptor */
-#define AR5K_STA_ID1_RTS_DEF_ANTENNA	0x00800000	/* Use default antenna for RTS (?) */
-#define AR5K_STA_ID1_ACKCTS_6MB		0x01000000	/* Use 6Mbit/s for ACK/CTS (?) */
+#define AR5K_STA_ID1_RTS_DEF_ANTENNA	0x00800000	/* Use default antenna for RTS */
+#define AR5K_STA_ID1_ACKCTS_6MB		0x01000000	/* Use 6Mbit/s for ACK/CTS */
 #define AR5K_STA_ID1_BASE_RATE_11B	0x02000000	/* Use 11b base rate (for ACK/CTS ?) [5211+] */
+#define AR5K_STA_ID1_SELF_GEN_SECTORE	0x04000000	/* Self generate sectore (?) */
+#define AR5K_STA_ID1_CRYPT_MIC_EN	0x08000000	/* Enable MIC */
+#define AR5K_STA_ID1_KEYSRCH_MODE	0x10000000	/* Keysearch mode (?) */
+#define AR5K_STA_ID1_PRESERVE_SEQ_NUM	0x20000000	/* Preserve sequence number */
 
 /*
  * First BSSID register (MAC address, lower 32bits)
@@ -1117,7 +1199,7 @@
  *
  * Retry limit register for 5210 (no QCU/DCU so it's done in PCU)
  */
-#define AR5K_NODCU_RETRY_LMT		0x801c			/*Register Address */
+#define AR5K_NODCU_RETRY_LMT		0x801c			/* Register Address */
 #define AR5K_NODCU_RETRY_LMT_SH_RETRY	0x0000000f	/* Short retry limit mask */
 #define AR5K_NODCU_RETRY_LMT_SH_RETRY_S	0
 #define AR5K_NODCU_RETRY_LMT_LG_RETRY	0x000000f0	/* Long retry mask */
@@ -1136,9 +1218,9 @@
 #define AR5K_USEC_5211			0x801c			/* Register Address [5211+] */
 #define AR5K_USEC			(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_USEC_5210 : AR5K_USEC_5211)
-#define AR5K_USEC_1			0x0000007f
+#define AR5K_USEC_1			0x0000007f	/* clock cycles for 1us */
 #define AR5K_USEC_1_S			0
-#define AR5K_USEC_32			0x00003f80
+#define AR5K_USEC_32			0x00003f80	/* clock cycles for 1us while on 32Mhz clock */
 #define AR5K_USEC_32_S			7
 #define AR5K_USEC_TX_LATENCY_5211	0x007fc000
 #define AR5K_USEC_TX_LATENCY_5211_S	14
@@ -1152,16 +1234,16 @@
 /*
  * PCU beacon control register
  */
-#define AR5K_BEACON_5210	0x8024
-#define AR5K_BEACON_5211	0x8020
+#define AR5K_BEACON_5210	0x8024			/*Register Address [5210] */
+#define AR5K_BEACON_5211	0x8020			/*Register Address [5211+] */
 #define AR5K_BEACON		(ah->ah_version == AR5K_AR5210 ? \
 				AR5K_BEACON_5210 : AR5K_BEACON_5211)
-#define AR5K_BEACON_PERIOD	0x0000ffff
+#define AR5K_BEACON_PERIOD	0x0000ffff	/* Mask for beacon period */
 #define AR5K_BEACON_PERIOD_S	0
-#define AR5K_BEACON_TIM		0x007f0000
+#define AR5K_BEACON_TIM		0x007f0000	/* Mask for TIM offset */
 #define AR5K_BEACON_TIM_S	16
-#define AR5K_BEACON_ENABLE	0x00800000
-#define AR5K_BEACON_RESET_TSF	0x01000000
+#define AR5K_BEACON_ENABLE	0x00800000	/* Enable beacons */
+#define AR5K_BEACON_RESET_TSF	0x01000000	/* Force TSF reset */
 
 /*
  * CFP period register
@@ -1234,7 +1316,6 @@
 
 /*
  * Receive filter register
- * TODO: Get these out of ar5xxx.h on ath5k
  */
 #define AR5K_RX_FILTER_5210	0x804c			/* Register Address [5210] */
 #define AR5K_RX_FILTER_5211	0x803c			/* Register Address [5211+] */
@@ -1307,11 +1388,11 @@
 #define AR5K_DIAG_SW_5211		0x8048			/* Register Address [5211+] */
 #define AR5K_DIAG_SW			(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211)
-#define AR5K_DIAG_SW_DIS_WEP_ACK	0x00000001
-#define AR5K_DIAG_SW_DIS_ACK		0x00000002	/* Disable ACKs (?) */
-#define AR5K_DIAG_SW_DIS_CTS		0x00000004	/* Disable CTSs (?) */
-#define AR5K_DIAG_SW_DIS_ENC		0x00000008	/* Disable encryption (?) */
-#define AR5K_DIAG_SW_DIS_DEC		0x00000010	/* Disable decryption (?) */
+#define AR5K_DIAG_SW_DIS_WEP_ACK	0x00000001	/* Disable ACKs if WEP key is invalid */
+#define AR5K_DIAG_SW_DIS_ACK		0x00000002	/* Disable ACKs */
+#define AR5K_DIAG_SW_DIS_CTS		0x00000004	/* Disable CTSs */
+#define AR5K_DIAG_SW_DIS_ENC		0x00000008	/* Disable encryption */
+#define AR5K_DIAG_SW_DIS_DEC		0x00000010	/* Disable decryption */
 #define AR5K_DIAG_SW_DIS_TX		0x00000020	/* Disable transmit [5210] */
 #define AR5K_DIAG_SW_DIS_RX_5210	0x00000040	/* Disable recieve */
 #define AR5K_DIAG_SW_DIS_RX_5211	0x00000020
@@ -1329,13 +1410,13 @@
 #define AR5K_DIAG_SW_CHAN_INFO_5211	0x00000100
 #define AR5K_DIAG_SW_CHAN_INFO		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200	/* Scrambler seed (?) */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200	/* Enable scrambler seed */
 #define AR5K_DIAG_SW_EN_SCRAM_SEED_5210	0x00000400
 #define AR5K_DIAG_SW_EN_SCRAM_SEED	(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
 #define AR5K_DIAG_SW_ECO_ENABLE		0x00000400	/* [5211+] */
 #define AR5K_DIAG_SW_SCVRAM_SEED	0x0003f800	/* [5210] */
-#define AR5K_DIAG_SW_SCRAM_SEED_M	0x0001fc00	/* Scrambler seed mask (?) */
+#define AR5K_DIAG_SW_SCRAM_SEED_M	0x0001fc00	/* Scrambler seed mask */
 #define AR5K_DIAG_SW_SCRAM_SEED_S	10
 #define AR5K_DIAG_SW_DIS_SEQ_INC	0x00040000	/* Disable seqnum increment (?)[5210] */
 #define AR5K_DIAG_SW_FRAME_NV0_5210	0x00080000
@@ -1344,6 +1425,7 @@
 					AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
 #define AR5K_DIAG_SW_OBSPT_M		0x000c0000
 #define AR5K_DIAG_SW_OBSPT_S		18
+/* more bits */
 
 /*
  * TSF (clock) register (lower 32 bits)
@@ -1369,15 +1451,34 @@
 /*
  * ADDAC test register [5211+]
  */
-#define AR5K_ADDAC_TEST	0x8054
-#define AR5K_ADDAC_TEST_TXCONT 0x00000001
+#define AR5K_ADDAC_TEST			0x8054			/* Register Address */
+#define AR5K_ADDAC_TEST_TXCONT 		0x00000001	/* Test continuous tx */
+#define AR5K_ADDAC_TEST_TST_MODE	0x00000002	/* Test mode */
+#define AR5K_ADDAC_TEST_LOOP_EN		0x00000004	/* Enable loop */
+#define AR5K_ADDAC_TEST_LOOP_LEN	0x00000008	/* Loop length (field) */
+#define AR5K_ADDAC_TEST_USE_U8		0x00004000	/* Use upper 8 bits */
+#define AR5K_ADDAC_TEST_MSB		0x00008000	/* State of MSB */
+#define AR5K_ADDAC_TEST_TRIG_SEL	0x00010000	/* Trigger select */
+#define AR5K_ADDAC_TEST_TRIG_PTY	0x00020000	/* Trigger polarity */
+#define AR5K_ADDAC_TEST_RXCONT		0x00040000	/* Continuous capture */
+#define AR5K_ADDAC_TEST_CAPTURE		0x00080000	/* Begin capture */
+#define AR5K_ADDAC_TEST_TST_ARM		0x00100000	/* Test ARM (Adaptive Radio Mode ?) */
 
 /*
  * Default antenna register [5211+]
  */
 #define AR5K_DEFAULT_ANTENNA	0x8058
 
+/*
+ * Frame control QoS mask register (?) [5211+]
+ * (FC_QOS_MASK)
+ */
+#define AR5K_FRAME_CTL_QOSM	0x805c
 
+/*
+ * Seq mask register (?) [5211+]
+ */
+#define AR5K_SEQ_MASK	0x8060
 
 /*
  * Retry count register [5210]
@@ -1449,124 +1550,242 @@
 /*
  * XR (eXtended Range) mode register
  */
-#define AR5K_XRMODE			0x80c0
-#define	AR5K_XRMODE_POLL_TYPE_M		0x0000003f
+#define AR5K_XRMODE			0x80c0			/* Register Address */
+#define	AR5K_XRMODE_POLL_TYPE_M		0x0000003f	/* Mask for Poll type (?) */
 #define	AR5K_XRMODE_POLL_TYPE_S		0
-#define	AR5K_XRMODE_POLL_SUBTYPE_M	0x0000003c
+#define	AR5K_XRMODE_POLL_SUBTYPE_M	0x0000003c	/* Mask for Poll subtype (?) */
 #define	AR5K_XRMODE_POLL_SUBTYPE_S	2
-#define	AR5K_XRMODE_POLL_WAIT_ALL	0x00000080
-#define	AR5K_XRMODE_SIFS_DELAY		0x000fff00
-#define	AR5K_XRMODE_FRAME_HOLD_M	0xfff00000
+#define	AR5K_XRMODE_POLL_WAIT_ALL	0x00000080	/* Wait for poll */
+#define	AR5K_XRMODE_SIFS_DELAY		0x000fff00	/* Mask for SIFS delay */
+#define	AR5K_XRMODE_FRAME_HOLD_M	0xfff00000	/* Mask for frame hold (?) */
 #define	AR5K_XRMODE_FRAME_HOLD_S	20
 
 /*
  * XR delay register
  */
-#define AR5K_XRDELAY			0x80c4
-#define AR5K_XRDELAY_SLOT_DELAY_M	0x0000ffff
+#define AR5K_XRDELAY			0x80c4			/* Register Address */
+#define AR5K_XRDELAY_SLOT_DELAY_M	0x0000ffff	/* Mask for slot delay */
 #define AR5K_XRDELAY_SLOT_DELAY_S	0
-#define AR5K_XRDELAY_CHIRP_DELAY_M	0xffff0000
+#define AR5K_XRDELAY_CHIRP_DELAY_M	0xffff0000	/* Mask for CHIRP data delay */
 #define AR5K_XRDELAY_CHIRP_DELAY_S	16
 
 /*
  * XR timeout register
  */
-#define AR5K_XRTIMEOUT			0x80c8
-#define AR5K_XRTIMEOUT_CHIRP_M		0x0000ffff
+#define AR5K_XRTIMEOUT			0x80c8			/* Register Address */
+#define AR5K_XRTIMEOUT_CHIRP_M		0x0000ffff	/* Mask for CHIRP timeout */
 #define AR5K_XRTIMEOUT_CHIRP_S		0
-#define AR5K_XRTIMEOUT_POLL_M		0xffff0000
+#define AR5K_XRTIMEOUT_POLL_M		0xffff0000	/* Mask for Poll timeout */
 #define AR5K_XRTIMEOUT_POLL_S		16
 
 /*
  * XR chirp register
  */
-#define AR5K_XRCHIRP			0x80cc
-#define AR5K_XRCHIRP_SEND		0x00000001
-#define AR5K_XRCHIRP_GAP		0xffff0000
+#define AR5K_XRCHIRP			0x80cc			/* Register Address */
+#define AR5K_XRCHIRP_SEND		0x00000001	/* Send CHIRP */
+#define AR5K_XRCHIRP_GAP		0xffff0000	/* Mask for CHIRP gap (?) */
 
 /*
  * XR stomp register
  */
-#define AR5K_XRSTOMP			0x80d0
-#define AR5K_XRSTOMP_TX			0x00000001
-#define AR5K_XRSTOMP_RX_ABORT		0x00000002
-#define AR5K_XRSTOMP_RSSI_THRES		0x0000ff00
+#define AR5K_XRSTOMP			0x80d0			/* Register Address */
+#define AR5K_XRSTOMP_TX			0x00000001	/* Stomp Tx (?) */
+#define AR5K_XRSTOMP_RX			0x00000002	/* Stomp Rx (?) */
+#define AR5K_XRSTOMP_TX_RSSI		0x00000004	/* Stomp Tx RSSI (?) */
+#define AR5K_XRSTOMP_TX_BSSID		0x00000008	/* Stomp Tx BSSID (?) */
+#define AR5K_XRSTOMP_DATA		0x00000010	/* Stomp data (?)*/
+#define AR5K_XRSTOMP_RSSI_THRES		0x0000ff00	/* Mask for XR RSSI threshold */
 
 /*
  * First enhanced sleep register
  */
-#define AR5K_SLEEP0			0x80d4
-#define AR5K_SLEEP0_NEXT_DTIM		0x0007ffff
+#define AR5K_SLEEP0			0x80d4			/* Register Address */
+#define AR5K_SLEEP0_NEXT_DTIM		0x0007ffff	/* Mask for next DTIM (?) */
 #define AR5K_SLEEP0_NEXT_DTIM_S		0
-#define AR5K_SLEEP0_ASSUME_DTIM		0x00080000
-#define AR5K_SLEEP0_ENH_SLEEP_EN	0x00100000
-#define AR5K_SLEEP0_CABTO		0xff000000
+#define AR5K_SLEEP0_ASSUME_DTIM		0x00080000	/* Assume DTIM */
+#define AR5K_SLEEP0_ENH_SLEEP_EN	0x00100000	/* Enable enchanced sleep control */
+#define AR5K_SLEEP0_CABTO		0xff000000	/* Mask for CAB Time Out */
 #define AR5K_SLEEP0_CABTO_S		24
 
 /*
  * Second enhanced sleep register
  */
-#define AR5K_SLEEP1			0x80d8
-#define AR5K_SLEEP1_NEXT_TIM		0x0007ffff
+#define AR5K_SLEEP1			0x80d8			/* Register Address */
+#define AR5K_SLEEP1_NEXT_TIM		0x0007ffff	/* Mask for next TIM (?) */
 #define AR5K_SLEEP1_NEXT_TIM_S		0
-#define AR5K_SLEEP1_BEACON_TO		0xff000000
+#define AR5K_SLEEP1_BEACON_TO		0xff000000	/* Mask for Beacon Time Out */
 #define AR5K_SLEEP1_BEACON_TO_S		24
 
 /*
  * Third enhanced sleep register
  */
-#define AR5K_SLEEP2			0x80dc
-#define AR5K_SLEEP2_TIM_PER		0x0000ffff
+#define AR5K_SLEEP2			0x80dc			/* Register Address */
+#define AR5K_SLEEP2_TIM_PER		0x0000ffff	/* Mask for TIM period (?) */
 #define AR5K_SLEEP2_TIM_PER_S		0
-#define AR5K_SLEEP2_DTIM_PER		0xffff0000
+#define AR5K_SLEEP2_DTIM_PER		0xffff0000	/* Mask for DTIM period (?) */
 #define AR5K_SLEEP2_DTIM_PER_S		16
 
 /*
  * BSSID mask registers
  */
-#define AR5K_BSS_IDM0			0x80e0
-#define AR5K_BSS_IDM1			0x80e4
+#define AR5K_BSS_IDM0			0x80e0	/* Upper bits */
+#define AR5K_BSS_IDM1			0x80e4	/* Lower bits */
 
 /*
  * TX power control (TPC) register
+ *
+ * XXX: PCDAC steps (0.5dbm) or DBM ?
+ *
+ * XXX: Mask changes for newer chips to 7f
+ *      like tx power table ?
  */
-#define AR5K_TXPC			0x80e8
-#define AR5K_TXPC_ACK_M			0x0000003f
+#define AR5K_TXPC			0x80e8			/* Register Address */
+#define AR5K_TXPC_ACK_M			0x0000003f	/* Mask for ACK tx power */
 #define AR5K_TXPC_ACK_S			0
-#define AR5K_TXPC_CTS_M			0x00003f00
+#define AR5K_TXPC_CTS_M			0x00003f00	/* Mask for CTS tx power */
 #define AR5K_TXPC_CTS_S			8
-#define AR5K_TXPC_CHIRP_M		0x003f0000
+#define AR5K_TXPC_CHIRP_M		0x003f0000	/* Mask for CHIRP tx power */
 #define AR5K_TXPC_CHIRP_S		22
 
 /*
  * Profile count registers
  */
-#define AR5K_PROFCNT_TX			0x80ec
-#define AR5K_PROFCNT_RX			0x80f0
-#define AR5K_PROFCNT_RXCLR		0x80f4
-#define AR5K_PROFCNT_CYCLE		0x80f8
+#define AR5K_PROFCNT_TX			0x80ec	/* Tx count */
+#define AR5K_PROFCNT_RX			0x80f0	/* Rx count */
+#define AR5K_PROFCNT_RXCLR		0x80f4	/* Clear Rx count */
+#define AR5K_PROFCNT_CYCLE		0x80f8	/* Cycle count (?) */
+
+/*
+ * Quiet (period) control registers (?)
+ */
+#define AR5K_QUIET_CTL1			0x80fc			/* Register Address */
+#define AR5K_QUIET_CTL1_NEXT_QT		0x0000ffff	/* Mask for next quiet (period?) (?) */
+#define AR5K_QUIET_CTL1_QT_EN		0x00010000	/* Enable quiet (period?) */
+#define AR5K_QUIET_CTL2			0x8100			/* Register Address */
+#define AR5K_QUIET_CTL2_QT_PER		0x0000ffff	/* Mask for quiet period (?) */
+#define AR5K_QUIET_CTL2_QT_DUR		0xffff0000	/* Mask for quiet duration (?) */
 
 /*
  * TSF parameter register
  */
-#define AR5K_TSF_PARM			0x8104
-#define AR5K_TSF_PARM_INC_M		0x000000ff
+#define AR5K_TSF_PARM			0x8104			/* Register Address */
+#define AR5K_TSF_PARM_INC_M		0x000000ff	/* Mask for TSF increment */
 #define AR5K_TSF_PARM_INC_S		0
 
 /*
+ * QoS register (?)
+ */
+#define AR5K_QOS			0x8108			/* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES	0x00000000	/* (field) */
+#define AR5K_QOS_NOACK_BIT_OFFSET	0x00000020	/* (field) */
+#define AR5K_QOS_NOACK_BYTE_OFFSET	0x00000080	/* (field) */
+
+/*
  * PHY error filter register
  */
 #define AR5K_PHY_ERR_FIL		0x810c
-#define AR5K_PHY_ERR_FIL_RADAR		0x00000020
-#define AR5K_PHY_ERR_FIL_OFDM		0x00020000
-#define AR5K_PHY_ERR_FIL_CCK		0x02000000
+#define AR5K_PHY_ERR_FIL_RADAR		0x00000020	/* Radar signal */
+#define AR5K_PHY_ERR_FIL_OFDM		0x00020000	/* OFDM false detect (ANI) */
+#define AR5K_PHY_ERR_FIL_CCK		0x02000000	/* CCK false detect (ANI) */
+
+/*
+ * XR latency register
+ */
+#define AR5K_XRLAT_TX		0x8110
 
 /*
- * Rate duration register
+ * ACK SIFS register
+ */
+#define AR5K_ACKSIFS		0x8114			/* Register Address */
+#define AR5K_ACKSIFS_INC	0x00000000	/* ACK SIFS Increment (field) */
+
+/*
+ * MIC QoS control register (?)
+ */
+#define	AR5K_MIC_QOS_CTL	0x8118			/* Register Address */
+#define	AR5K_MIC_QOS_CTL_0	0x00000001	/* MIC QoS control 0 (?) */
+#define	AR5K_MIC_QOS_CTL_1	0x00000004	/* MIC QoS control 1 (?) */
+#define	AR5K_MIC_QOS_CTL_2	0x00000010	/* MIC QoS control 2 (?) */
+#define	AR5K_MIC_QOS_CTL_3	0x00000040	/* MIC QoS control 3 (?) */
+#define	AR5K_MIC_QOS_CTL_4	0x00000100	/* MIC QoS control 4 (?) */
+#define	AR5K_MIC_QOS_CTL_5	0x00000400	/* MIC QoS control 5 (?) */
+#define	AR5K_MIC_QOS_CTL_6	0x00001000	/* MIC QoS control 6 (?) */
+#define	AR5K_MIC_QOS_CTL_7	0x00004000	/* MIC QoS control 7 (?) */
+#define	AR5K_MIC_QOS_CTL_MQ_EN	0x00010000	/* Enable MIC QoS */
+
+/*
+ * MIC QoS select register (?)
+ */
+#define	AR5K_MIC_QOS_SEL	0x811c
+#define	AR5K_MIC_QOS_SEL_0	0x00000001
+#define	AR5K_MIC_QOS_SEL_1	0x00000010
+#define	AR5K_MIC_QOS_SEL_2	0x00000100
+#define	AR5K_MIC_QOS_SEL_3	0x00001000
+#define	AR5K_MIC_QOS_SEL_4	0x00010000
+#define	AR5K_MIC_QOS_SEL_5	0x00100000
+#define	AR5K_MIC_QOS_SEL_6	0x01000000
+#define	AR5K_MIC_QOS_SEL_7	0x10000000
+
+/*
+ * Misc mode control register (?)
+ */
+#define	AR5K_MISC_MODE			0x8120			/* Register Address */
+#define	AR5K_MISC_MODE_FBSSID_MATCH	0x00000001	/* Force BSSID match */
+#define	AR5K_MISC_MODE_ACKSIFS_MEM	0x00000002	/* ACK SIFS memory (?) */
+/* more bits */
+
+/*
+ * OFDM Filter counter
+ */
+#define	AR5K_OFDM_FIL_CNT		0x8124
+
+/*
+ * CCK Filter counter
+ */
+#define	AR5K_CCK_FIL_CNT		0x8128
+
+/*
+ * PHY Error Counters (?)
+ */
+#define	AR5K_PHYERR_CNT1		0x812c
+#define	AR5K_PHYERR_CNT1_MASK		0x8130
+
+#define	AR5K_PHYERR_CNT2		0x8134
+#define	AR5K_PHYERR_CNT2_MASK		0x8138
+
+/*
+ * TSF Threshold register (?)
+ */
+#define	AR5K_TSF_THRES			0x813c
+
+/*
+ * Rate -> ACK SIFS mapping table (32 entries)
+ */
+#define	AR5K_RATE_ACKSIFS_BASE		0x8680			/* Register Address */
+#define	AR5K_RATE_ACKSIFS(_n)		(AR5K_RATE_ACKSIFS_BSE + ((_n) << 2))
+#define	AR5K_RATE_ACKSIFS_NORMAL	0x00000001	/* Normal SIFS (field) */
+#define	AR5K_RATE_ACKSIFS_TURBO		0x00000400	/* Turbo SIFS (field) */
+
+/*
+ * Rate -> duration mapping table (32 entries)
  */
 #define AR5K_RATE_DUR_BASE		0x8700
 #define AR5K_RATE_DUR(_n)		(AR5K_RATE_DUR_BASE + ((_n) << 2))
 
+/*
+ * Rate -> db mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_RATE2DB_BASE		0x87c0
+#define AR5K_RATE2DB(_n)		(AR5K_RATE2DB_BASE + ((_n) << 2))
+
+/*
+ * db -> Rate mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_DB2RATE_BASE		0x87e0
+#define AR5K_DB2RATE(_n)		(AR5K_DB2RATE_BASE + ((_n) << 2))
+
 /*===5212 end===*/
 
 /*
@@ -1613,12 +1832,34 @@
 /*===PHY REGISTERS===*/
 
 /*
- * PHY register
+ * PHY registers start
  */
 #define	AR5K_PHY_BASE			0x9800
 #define	AR5K_PHY(_n)			(AR5K_PHY_BASE + ((_n) << 2))
-#define AR5K_PHY_SHIFT_2GHZ		0x00004007
-#define AR5K_PHY_SHIFT_5GHZ		0x00000007
+
+/*
+ * TST_2 (Misc config parameters)
+ */
+#define	AR5K_PHY_TST2			0x9800			/* Register Address */
+#define AR5K_PHY_TST2_TRIG_SEL		0x00000001	/* Trigger select (?) (field ?) */
+#define AR5K_PHY_TST2_TRIG		0x00000010	/* Trigger (?) (field ?) */
+#define AR5K_PHY_TST2_CBUS_MODE		0x00000100	/* Cardbus mode (?) */
+/* bit reserved */
+#define AR5K_PHY_TST2_CLK32		0x00000400	/* CLK_OUT is CLK32 (32Khz external) */
+#define AR5K_PHY_TST2_CHANCOR_DUMP_EN	0x00000800	/* Enable Chancor dump (?) */
+#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP	0x00001000	/* Even Chancor dump (?) */
+#define AR5K_PHY_TST2_RFSILENT_EN	0x00002000	/* Enable RFSILENT */
+#define AR5K_PHY_TST2_ALT_RFDATA	0x00004000	/* Alternate RFDATA (5-2GHz switch) */
+#define AR5K_PHY_TST2_MINI_OBS_EN	0x00008000	/* Enable mini OBS (?) */
+#define AR5K_PHY_TST2_RX2_IS_RX5_INV	0x00010000	/* 2GHz rx path is the 5GHz path inverted (?) */
+#define AR5K_PHY_TST2_SLOW_CLK160	0x00020000	/* Slow CLK160 (?) */
+#define AR5K_PHY_TST2_AGC_OBS_SEL_3	0x00040000	/* AGC OBS Select 3 (?) */
+#define AR5K_PHY_TST2_BBB_OBS_SEL	0x00080000	/* BB OBS Select (field ?) */
+#define AR5K_PHY_TST2_ADC_OBS_SEL	0x00800000	/* ADC OBS Select (field ?) */
+#define AR5K_PHY_TST2_RX_CLR_SEL	0x08000000	/* RX Clear Select (?) */
+#define AR5K_PHY_TST2_FORCE_AGC_CLR	0x10000000	/* Force AGC clear (?) */
+#define AR5K_PHY_SHIFT_2GHZ		0x00004007	/* Used to access 2GHz radios */
+#define AR5K_PHY_SHIFT_5GHZ		0x00000007	/* Used to access 5GHz radios (default) */
 
 /*
  * PHY frame control register [5110] /turbo mode register [5111+]
@@ -1630,18 +1871,21 @@
  * a "turbo mode register" for 5110. We treat this one as
  * a frame control register for 5110 below.
  */
-#define	AR5K_PHY_TURBO			0x9804
-#define	AR5K_PHY_TURBO_MODE		0x00000001
-#define	AR5K_PHY_TURBO_SHORT		0x00000002
+#define	AR5K_PHY_TURBO			0x9804			/* Register Address */
+#define	AR5K_PHY_TURBO_MODE		0x00000001	/* Enable turbo mode */
+#define	AR5K_PHY_TURBO_SHORT		0x00000002	/* Short mode (20Mhz channels) (?) */
 
 /*
  * PHY agility command register
+ * (aka TST_1)
  */
-#define	AR5K_PHY_AGC			0x9808
-#define	AR5K_PHY_AGC_DISABLE		0x08000000
+#define	AR5K_PHY_AGC			0x9808			/* Register Address */
+#define	AR5K_PHY_TST1			0x9808
+#define	AR5K_PHY_AGC_DISABLE		0x08000000	/* Disable AGC to A2 (?)*/
+#define	AR5K_PHY_TST1_TXHOLD		0x00003800	/* Set tx hold (?) */
 
 /*
- * PHY timing register [5112+]
+ * PHY timing register 3 [5112+]
  */
 #define	AR5K_PHY_TIMING_3		0x9814
 #define	AR5K_PHY_TIMING_3_DSC_MAN	0xfffe0000
@@ -1657,26 +1901,81 @@
 /*
  * PHY activation register
  */
-#define	AR5K_PHY_ACT			0x981c
-#define	AR5K_PHY_ACT_ENABLE		0x00000001
-#define	AR5K_PHY_ACT_DISABLE		0x00000002
+#define	AR5K_PHY_ACT			0x981c			/* Register Address */
+#define	AR5K_PHY_ACT_ENABLE		0x00000001	/* Activate PHY */
+#define	AR5K_PHY_ACT_DISABLE		0x00000002	/* Deactivate PHY */
+
+/*
+ * PHY RF control registers
+ * (i think these are delay times,
+ * these calibration values exist
+ * in EEPROM)
+ */
+#define AR5K_PHY_RF_CTL2		0x9824			/* Register Address */
+#define	AR5K_PHY_RF_CTL2_TXF2TXD_START	0x0000000f	/* Mask for TX frame to TX d(esc?) start */
+
+#define AR5K_PHY_RF_CTL3		0x9828			/* Register Address */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000000f	/* Mask for TX end to XLNA on */
+
+#define AR5K_PHY_RF_CTL4		0x9834			/* Register Address */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON	0x00000001	/* TX frame to XPA A on (field) */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON	0x00000100	/* TX frame to XPA B on (field) */
+#define	AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF	0x00010000	/* TX end to XPA A off (field) */
+#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF	0x01000000	/* TX end to XPA B off (field) */
+
+/*
+ * Pre-Amplifier control register
+ * (XPA -> external pre-amplifier)
+ */
+#define	AR5K_PHY_PA_CTL			0x9838			/* Register Address */
+#define	AR5K_PHY_PA_CTL_XPA_A_HI	0x00000001	/* XPA A high (?) */
+#define	AR5K_PHY_PA_CTL_XPA_B_HI	0x00000002	/* XPA B high (?) */
+#define	AR5K_PHY_PA_CTL_XPA_A_EN	0x00000004	/* Enable XPA A */
+#define	AR5K_PHY_PA_CTL_XPA_B_EN	0x00000008	/* Enable XPA B */
+
+/*
+ * PHY settling register
+ */
+#define AR5K_PHY_SETTLING		0x9844			/* Register Address */
+#define	AR5K_PHY_SETTLING_AGC		0x0000007f	/* Mask for AGC settling time */
+#define	AR5K_PHY_SETTLING_SWITCH	0x00003f80	/* Mask for Switch settlig time */
+
+/*
+ * PHY Gain registers
+ */
+#define AR5K_PHY_GAIN			0x9848			/* Register Address */
+#define	AR5K_PHY_GAIN_TXRX_ATTEN	0x0003f000	/* Mask for TX-RX Attenuation */
+
+#define	AR5K_PHY_GAIN_OFFSET		0x984c			/* Register Address */
+#define	AR5K_PHY_GAIN_OFFSET_RXTX_FLAG	0x00020000	/* RX-TX flag (?) */
+
+/*
+ * Desired size register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_DESIRED_SIZE		0x9850			/* Register Address */
+#define	AR5K_PHY_DESIRED_SIZE_ADC	0x000000ff	/* Mask for ADC desired size */
+#define	AR5K_PHY_DESIRED_SIZE_PGA	0x0000ff00	/* Mask for PGA desired size */
+#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Mask for Total desired size (?) */
 
 /*
  * PHY signal register
+ * (for more infos read ANI patent)
  */
-#define	AR5K_PHY_SIG			0x9858
-#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000
+#define	AR5K_PHY_SIG			0x9858			/* Register Address */
+#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000	/* Mask for FIRSTEP */
 #define	AR5K_PHY_SIG_FIRSTEP_S		12
-#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000
+#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000	/* Mask for FIPWR */
 #define	AR5K_PHY_SIG_FIRPWR_S		18
 
 /*
  * PHY coarse agility control register
+ * (for more infos read ANI patent)
  */
-#define	AR5K_PHY_AGCCOARSE		0x985c
-#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80
+#define	AR5K_PHY_AGCCOARSE		0x985c			/* Register Address */
+#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80	/* Mask for AGC Coarse low */
 #define	AR5K_PHY_AGCCOARSE_LO_S		7
-#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000
+#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000	/* Mask for AGC Coarse high */
 #define	AR5K_PHY_AGCCOARSE_HI_S		15
 
 /*
@@ -1689,12 +1988,13 @@
 /*
  * PHY noise floor status register
  */
-#define AR5K_PHY_NF			0x9864
-#define AR5K_PHY_NF_M			0x000001ff
-#define AR5K_PHY_NF_ACTIVE		0x00000100
+#define AR5K_PHY_NF			0x9864			/* Register address */
+#define AR5K_PHY_NF_M			0x000001ff	/* Noise floor mask */
+#define AR5K_PHY_NF_ACTIVE		0x00000100	/* Noise floor calibration still active */
 #define AR5K_PHY_NF_RVAL(_n)		(((_n) >> 19) & AR5K_PHY_NF_M)
 #define AR5K_PHY_NF_AVAL(_n)		(-((_n) ^ AR5K_PHY_NF_M) + 1)
 #define AR5K_PHY_NF_SVAL(_n)		(((_n) & AR5K_PHY_NF_M) | (1 << 9))
+#define	AR5K_PHY_NF_THRESH62		0x00001000	/* Thresh62 -check ANI patent- (field) */
 
 /*
  * PHY ADC saturation register [5110]
@@ -1706,6 +2006,30 @@
 #define	AR5K_PHY_ADCSAT_THR_S		5
 
 /*
+ * PHY Weak ofdm signal detection threshold registers (ANI) [5212+]
+ */
+
+/* High thresholds */
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR		0x9868
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT	0x0000001f
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S	0
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1		0x00fe0000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S	17
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2		0x7f000000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S	24
+
+/* Low thresholds */
+#define AR5K_PHY_WEAK_OFDM_LOW_THR 		0x986c
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN	0x00000001
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT	0x00003f00
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S	8
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1		0x001fc000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S		14
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2		0x0fe00000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S		21
+
+
+/*
  * PHY sleep registers [5112+]
  */
 #define AR5K_PHY_SCR			0x9870
@@ -1730,6 +2054,8 @@
 					AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
 #define AR5K_PHY_PLL_RF5111		0x00000000
 #define AR5K_PHY_PLL_RF5112		0x00000040
+#define	AR5K_PHY_PLL_HALF_RATE		0x00000100
+#define	AR5K_PHY_PLL_QUARTER_RATE	0x00000200
 
 /*
  * RF Buffer register
@@ -1792,23 +2118,74 @@
 #define AR5K_PHY_RFSTG_DISABLE		0x00000021
 
 /*
+ * PHY Antenna control register
+ */
+#define AR5K_PHY_ANT_CTL		0x9910			/* Register Address */
+#define	AR5K_PHY_ANT_CTL_TXRX_EN	0x00000001	/* Enable TX/RX (?) */
+#define	AR5K_PHY_ANT_CTL_SECTORED_ANT	0x00000004	/* Sectored Antenna */
+#define	AR5K_PHY_ANT_CTL_HITUNE5	0x00000008	/* Hitune5 (?) */
+#define	AR5K_PHY_ANT_CTL_SWTABLE_IDLE	0x00000010	/* Switch table idle (?) */
+
+/*
  * PHY receiver delay register [5111+]
  */
-#define	AR5K_PHY_RX_DELAY		0x9914
-#define	AR5K_PHY_RX_DELAY_M		0x00003fff
+#define	AR5K_PHY_RX_DELAY		0x9914			/* Register Address */
+#define	AR5K_PHY_RX_DELAY_M		0x00003fff	/* Mask for RX activate to receive delay (/100ns) */
+
+/*
+ * PHY max rx length register (?) [5111]
+ */
+#define	AR5K_PHY_MAX_RX_LEN		0x991c
 
 /*
- * PHY timing I(nphase) Q(adrature) control register [5111+]
+ * PHY timing register 4
+ * I(nphase)/Q(adrature) calibration register [5111+]
  */
-#define	AR5K_PHY_IQ			0x9920		/* Register address */
+#define	AR5K_PHY_IQ			0x9920			/* Register Address */
 #define	AR5K_PHY_IQ_CORR_Q_Q_COFF	0x0000001f	/* Mask for q correction info */
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF	0x000007e0	/* Mask for i correction info */
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF_S	5
 #define	AR5K_PHY_IQ_CORR_ENABLE		0x00000800	/* Enable i/q correction */
-#define	AR5K_PHY_IQ_CAL_NUM_LOG_MAX	0x0000f000
+#define	AR5K_PHY_IQ_CAL_NUM_LOG_MAX	0x0000f000	/* Mask for max number of samples in log scale */
 #define	AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S	12
 #define	AR5K_PHY_IQ_RUN			0x00010000	/* Run i/q calibration */
+#define	AR5K_PHY_IQ_USE_PT_DF		0x00020000	/* Use pilot track df (?) */
+#define	AR5K_PHY_IQ_EARLY_TRIG_THR	0x00200000	/* Early trigger threshold (?) (field) */
+#define	AR5K_PHY_IQ_PILOT_MASK_EN	0x10000000	/* Enable pilot mask (?) */
+#define	AR5K_PHY_IQ_CHAN_MASK_EN	0x20000000	/* Enable channel mask (?) */
+#define	AR5K_PHY_IQ_SPUR_FILT_EN	0x40000000	/* Enable spur filter */
+#define	AR5K_PHY_IQ_SPUR_RSSI_EN	0x80000000	/* Enable spur rssi */
 
+/*
+ * PHY timing register 5
+ * OFDM Self-correlator Cyclic RSSI threshold params
+ * (Check out bb_cycpwr_thr1 on ANI patent)
+ */
+#define	AR5K_PHY_OFDM_SELFCORR			0x9924			/* Register Address */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN	0x00000001	/* Enable cyclic RSSI thr 1 */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1	0x000000fe	/* Mask for Cyclic RSSI threshold 1 */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3	0x00000100	/* Cyclic RSSI threshold 3 (field) (?) */
+#define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN	0x00008000	/* Enable 1A RSSI threshold (?) */
+#define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR	0x00010000	/* 1A RSSI threshold (field) (?) */
+#define	AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI	0x00800000	/* Long sc threshold hi rssi (?) */
+
+/*
+ * PHY-only warm reset register
+ */
+#define	AR5K_PHY_WARM_RESET		0x9928
+
+/*
+ * PHY-only control register
+ */
+#define AR5K_PHY_CTL			0x992c			/* Register Address */
+#define	AR5K_PHY_CTL_RX_DRAIN_RATE	0x00000001	/* RX drain rate (?) */
+#define	AR5K_PHY_CTL_LATE_TX_SIG_SYM	0x00000002	/* Late tx signal symbol (?) */
+#define	AR5K_PHY_CTL_GEN_SCRAMBLER	0x00000004	/* Generate scrambler */
+#define	AR5K_PHY_CTL_TX_ANT_SEL		0x00000008	/* TX antenna select */
+#define	AR5K_PHY_CTL_TX_ANT_STATIC	0x00000010	/* Static TX antenna */
+#define	AR5K_PHY_CTL_RX_ANT_SEL		0x00000020	/* RX antenna select */
+#define	AR5K_PHY_CTL_RX_ANT_STATIC	0x00000040	/* Static RX antenna */
+#define	AR5K_PHY_CTL_LOW_FREQ_SLE_EN	0x00000080	/* Enable low freq sleep */
 
 /*
  * PHY PAPD probe register [5111+ (?)]
@@ -1816,9 +2193,13 @@
  * Because it's always 0 in 5211 initialization code
  */
 #define	AR5K_PHY_PAPD_PROBE		0x9930
+#define	AR5K_PHY_PAPD_PROBE_SH_HI_PAR	0x00000001
+#define	AR5K_PHY_PAPD_PROBE_PCDAC_BIAS	0x00000002
+#define	AR5K_PHY_PAPD_PROBE_COMP_GAIN	0x00000040
 #define	AR5K_PHY_PAPD_PROBE_TXPOWER	0x00007e00
 #define	AR5K_PHY_PAPD_PROBE_TXPOWER_S	9
 #define	AR5K_PHY_PAPD_PROBE_TX_NEXT	0x00008000
+#define	AR5K_PHY_PAPD_PROBE_PREDIST_EN	0x00010000
 #define	AR5K_PHY_PAPD_PROBE_TYPE	0x01800000	/* [5112+] */
 #define	AR5K_PHY_PAPD_PROBE_TYPE_S	23
 #define	AR5K_PHY_PAPD_PROBE_TYPE_OFDM	0
@@ -1848,15 +2229,16 @@
 #define	AR5K_PHY_FRAME_CTL		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211)
 /*---[5111+]---*/
-#define	AR5K_PHY_FRAME_CTL_TX_CLIP	0x00000038
+#define	AR5K_PHY_FRAME_CTL_TX_CLIP	0x00000038	/* Mask for tx clip (?) */
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP_S	3
+#define	AR5K_PHY_FRAME_CTL_PREP_CHINFO	0x00010000	/* Prepend chan info */
 /*---[5110/5111]---*/
-#define	AR5K_PHY_FRAME_CTL_TIMING_ERR	0x01000000
-#define	AR5K_PHY_FRAME_CTL_PARITY_ERR	0x02000000
-#define	AR5K_PHY_FRAME_CTL_ILLRATE_ERR	0x04000000	/* illegal rate */
-#define	AR5K_PHY_FRAME_CTL_ILLLEN_ERR	0x08000000	/* illegal length */
+#define	AR5K_PHY_FRAME_CTL_TIMING_ERR	0x01000000	/* PHY timing error */
+#define	AR5K_PHY_FRAME_CTL_PARITY_ERR	0x02000000	/* Parity error */
+#define	AR5K_PHY_FRAME_CTL_ILLRATE_ERR	0x04000000	/* Illegal rate */
+#define	AR5K_PHY_FRAME_CTL_ILLLEN_ERR	0x08000000	/* Illegal length */
 #define	AR5K_PHY_FRAME_CTL_SERVICE_ERR	0x20000000
-#define	AR5K_PHY_FRAME_CTL_TXURN_ERR	0x40000000	/* tx underrun */
+#define	AR5K_PHY_FRAME_CTL_TXURN_ERR	0x40000000	/* TX underrun */
 #define AR5K_PHY_FRAME_CTL_INI		AR5K_PHY_FRAME_CTL_SERVICE_ERR | \
 			AR5K_PHY_FRAME_CTL_TXURN_ERR | \
 			AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \
@@ -1915,6 +2297,11 @@ after DFS is enabled */
 #define AR5K_PHY_ANT_SWITCH_TABLE_1	0x9964
 
 /*
+ * PHY Noise floor threshold
+ */
+#define AR5K_PHY_NFTHRES		0x9968
+
+/*
  * PHY clock sleep registers [5112+]
  */
 #define AR5K_PHY_SCLOCK			0x99f0
@@ -1922,56 +2309,116 @@ after DFS is enabled */
 #define AR5K_PHY_SDELAY			0x99f4
 #define AR5K_PHY_SDELAY_32MHZ		0x000000ff
 #define AR5K_PHY_SPENDING		0x99f8
+#define	AR5K_PHY_SPENDING_14		0x00000014
+#define	AR5K_PHY_SPENDING_18		0x00000018
 #define AR5K_PHY_SPENDING_RF5111	0x00000018
-#define AR5K_PHY_SPENDING_RF5112	0x00000014 /* <- i 've only seen this on 2425 dumps ! */
-#define AR5K_PHY_SPENDING_RF5112A	0x0000000e /* but since i only have 5112A-based chips */
-#define AR5K_PHY_SPENDING_RF5424	0x00000012 /* to test it might be also for old 5112.  */
+#define AR5K_PHY_SPENDING_RF5112	0x00000014
+/* #define AR5K_PHY_SPENDING_RF5112A	0x0000000e */
+/* #define AR5K_PHY_SPENDING_RF5424	0x00000012 */
+#define	AR5K_PHY_SPENDING_RF5413	0x00000014
+#define	AR5K_PHY_SPENDING_RF2413	0x00000014
+#define AR5K_PHY_SPENDING_RF2425	0x00000018
 
 /*
  * Misc PHY/radio registers [5110 - 5111]
  */
-#define	AR5K_BB_GAIN_BASE		0x9b00 /* BaseBand Amplifier Gain table base address */
+#define	AR5K_BB_GAIN_BASE		0x9b00	/* BaseBand Amplifier Gain table base address */
 #define AR5K_BB_GAIN(_n)		(AR5K_BB_GAIN_BASE + ((_n) << 2))
-#define	AR5K_RF_GAIN_BASE		0x9a00 /* RF Amplrifier Gain table base address */
+#define	AR5K_RF_GAIN_BASE		0x9a00	/* RF Amplrifier Gain table base address */
 #define AR5K_RF_GAIN(_n)		(AR5K_RF_GAIN_BASE + ((_n) << 2))
 
 /*
  * PHY timing IQ calibration result register [5111+]
  */
-#define	AR5K_PHY_IQRES_CAL_PWR_I	0x9c10 /* I (Inphase) power value */
-#define	AR5K_PHY_IQRES_CAL_PWR_Q	0x9c14 /* Q (Quadrature) power value */
+#define	AR5K_PHY_IQRES_CAL_PWR_I	0x9c10	/* I (Inphase) power value */
+#define	AR5K_PHY_IQRES_CAL_PWR_Q	0x9c14	/* Q (Quadrature) power value */
 #define	AR5K_PHY_IQRES_CAL_CORR		0x9c18	/* I/Q Correlation */
 
 /*
  * PHY current RSSI register [5111+]
  */
-#define	AR5K_PHY_CURRENT_RSSI		0x9c1c
+#define	AR5K_PHY_CURRENT_RSSI	0x9c1c
+
+/*
+ * PHY RF Bus grant register (?)
+ */
+#define	AR5K_PHY_RFBUS_GRANT	0x9c20
+
+/*
+ * PHY ADC test register
+ */
+#define	AR5K_PHY_ADC_TEST	0x9c24
+#define	AR5K_PHY_ADC_TEST_I	0x00000001
+#define	AR5K_PHY_ADC_TEST_Q	0x00000200
+
+/*
+ * PHY DAC test register
+ */
+#define	AR5K_PHY_DAC_TEST	0x9c28
+#define	AR5K_PHY_DAC_TEST_I	0x00000001
+#define	AR5K_PHY_DAC_TEST_Q	0x00000200
+
+/*
+ * PHY PTAT register (?)
+ */
+#define	AR5K_PHY_PTAT		0x9c2c
+
+/*
+ * PHY Illegal TX rate register [5112+]
+ */
+#define	AR5K_PHY_BAD_TX_RATE	0x9c30
+
+/*
+ * PHY SPUR Power register [5112+]
+ */
+#define	AR5K_PHY_SPUR_PWR	0x9c34			/* Register Address */
+#define	AR5K_PHY_SPUR_PWR_I	0x00000001	/* SPUR Power estimate for I (field) */
+#define	AR5K_PHY_SPUR_PWR_Q	0x00000100	/* SPUR Power estimate for Q (field) */
+#define	AR5K_PHY_SPUR_PWR_FILT	0x00010000	/* Power with SPUR removed (field) */
+
+/*
+ * PHY Channel status register [5112+] (?)
+ */
+#define	AR5K_PHY_CHAN_STATUS		0x9c38
+#define	AR5K_PHY_CHAN_STATUS_BT_ACT	0x00000001
+#define	AR5K_PHY_CHAN_STATUS_RX_CLR_RAW	0x00000002
+#define	AR5K_PHY_CHAN_STATUS_RX_CLR_MAC	0x00000004
+#define	AR5K_PHY_CHAN_STATUS_RX_CLR_PAP	0x00000008
+
+/*
+ * PHY PAPD I (power?) table (?)
+ * (92! entries)
+ */
+#define	AR5K_PHY_PAPD_I_BASE	0xa000
+#define	AR5K_PHY_PAPD_I(_n)	(AR5K_PHY_PAPD_I_BASE + ((_n) << 2))
 
 /*
  * PHY PCDAC TX power table
  */
 #define	AR5K_PHY_PCDAC_TXPOWER_BASE_5211	0xa180
-#define AR5K_PHY_PCDAC_TXPOWER_BASE_5413	0xa280
-#define AR5K_PHY_PCDAC_TXPOWER_BASE	(ah->ah_radio >= AR5K_RF5413 ? \
-					AR5K_PHY_PCDAC_TXPOWER_BASE_5413 :\
+#define AR5K_PHY_PCDAC_TXPOWER_BASE_2413	0xa280
+#define AR5K_PHY_PCDAC_TXPOWER_BASE	(ah->ah_radio >= AR5K_RF2413 ? \
+					AR5K_PHY_PCDAC_TXPOWER_BASE_2413 :\
 					AR5K_PHY_PCDAC_TXPOWER_BASE_5211)
 #define	AR5K_PHY_PCDAC_TXPOWER(_n)	(AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2))
 
 /*
  * PHY mode register [5111+]
  */
-#define	AR5K_PHY_MODE			0x0a200		/* Register address */
-#define	AR5K_PHY_MODE_MOD		0x00000001	/* PHY Modulation mask*/
+#define	AR5K_PHY_MODE			0x0a200			/* Register Address */
+#define	AR5K_PHY_MODE_MOD		0x00000001	/* PHY Modulation bit */
 #define AR5K_PHY_MODE_MOD_OFDM		0
 #define AR5K_PHY_MODE_MOD_CCK		1
-#define AR5K_PHY_MODE_FREQ		0x00000002	/* Freq mode mask */
+#define AR5K_PHY_MODE_FREQ		0x00000002	/* Freq mode bit */
 #define	AR5K_PHY_MODE_FREQ_5GHZ		0
 #define	AR5K_PHY_MODE_FREQ_2GHZ		2
-#define AR5K_PHY_MODE_MOD_DYN		0x00000004	/* Dynamic OFDM/CCK mode mask [5112+] */
+#define AR5K_PHY_MODE_MOD_DYN		0x00000004	/* Enable Dynamic OFDM/CCK mode [5112+] */
 #define AR5K_PHY_MODE_RAD		0x00000008	/* [5212+] */
 #define AR5K_PHY_MODE_RAD_RF5111	0
 #define AR5K_PHY_MODE_RAD_RF5112	8
-#define AR5K_PHY_MODE_XR		0x00000010	/* [5112+] */
+#define AR5K_PHY_MODE_XR		0x00000010	/* Enable XR mode [5112+] */
+#define	AR5K_PHY_MODE_HALF_RATE		0x00000020	/* Enable Half rate (test) */
+#define	AR5K_PHY_MODE_QUARTER_RATE	0x00000040	/* Enable Quarter rat (test) */
 
 /*
  * PHY CCK transmit control register [5111+ (?)]
@@ -1979,6 +2426,15 @@ after DFS is enabled */
 #define AR5K_PHY_CCKTXCTL		0xa204
 #define AR5K_PHY_CCKTXCTL_WORLD		0x00000000
 #define AR5K_PHY_CCKTXCTL_JAPAN		0x00000010
+#define	AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS	0x00000001
+#define	AR5K_PHY_CCKTXCTK_DAC_SCALE	0x00000004
+
+/*
+ * PHY CCK Cross-correlator Barker RSSI threshold register [5212+]
+ */
+#define AR5K_PHY_CCK_CROSSCORR			0xa208
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR	0x0000000f
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S	0
 
 /*
  * PHY 2GHz gain register [5111+]
diff --git a/drivers/net/wireless/ath9k/Kconfig b/drivers/net/wireless/ath9k/Kconfig
new file mode 100644
index 00000000000..9e19dcceb3a
--- /dev/null
+++ b/drivers/net/wireless/ath9k/Kconfig
@@ -0,0 +1,8 @@
+config ATH9K
+	tristate "Atheros 802.11n wireless cards support"
+	depends on PCI && MAC80211 && WLAN_80211
+	---help---
+	  This module adds support for wireless adapters based on
+	  Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
+
+	  If you choose to build a module, it'll be called ath9k.
diff --git a/drivers/net/wireless/ath9k/Makefile b/drivers/net/wireless/ath9k/Makefile
new file mode 100644
index 00000000000..a6411517e5f
--- /dev/null
+++ b/drivers/net/wireless/ath9k/Makefile
@@ -0,0 +1,11 @@
+ath9k-y +=	hw.o \
+		phy.o \
+		regd.o \
+		beacon.o \
+		main.o \
+		recv.o \
+		xmit.o \
+		rc.o \
+		core.o
+
+obj-$(CONFIG_ATH9K) += ath9k.o
diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h
new file mode 100644
index 00000000000..d1b0fbae5a3
--- /dev/null
+++ b/drivers/net/wireless/ath9k/ath9k.h
@@ -0,0 +1,1021 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef ATH9K_H
+#define ATH9K_H
+
+#include <linux/io.h>
+
+#define ATHEROS_VENDOR_ID	0x168c
+
+#define AR5416_DEVID_PCI	0x0023
+#define AR5416_DEVID_PCIE	0x0024
+#define AR9160_DEVID_PCI	0x0027
+#define AR9280_DEVID_PCI	0x0029
+#define AR9280_DEVID_PCIE	0x002a
+
+#define AR5416_AR9100_DEVID	0x000b
+
+#define	AR_SUBVENDOR_ID_NOG	0x0e11
+#define AR_SUBVENDOR_ID_NEW_A	0x7065
+
+#define ATH9K_TXERR_XRETRY         0x01
+#define ATH9K_TXERR_FILT           0x02
+#define ATH9K_TXERR_FIFO           0x04
+#define ATH9K_TXERR_XTXOP          0x08
+#define ATH9K_TXERR_TIMER_EXPIRED  0x10
+
+#define ATH9K_TX_BA                0x01
+#define ATH9K_TX_PWRMGMT           0x02
+#define ATH9K_TX_DESC_CFG_ERR      0x04
+#define ATH9K_TX_DATA_UNDERRUN     0x08
+#define ATH9K_TX_DELIM_UNDERRUN    0x10
+#define ATH9K_TX_SW_ABORTED        0x40
+#define ATH9K_TX_SW_FILTERED       0x80
+
+#define NBBY    8
+
+struct ath_tx_status {
+	u32 ts_tstamp;
+	u16 ts_seqnum;
+	u8 ts_status;
+	u8 ts_ratecode;
+	u8 ts_rateindex;
+	int8_t ts_rssi;
+	u8 ts_shortretry;
+	u8 ts_longretry;
+	u8 ts_virtcol;
+	u8 ts_antenna;
+	u8 ts_flags;
+	int8_t ts_rssi_ctl0;
+	int8_t ts_rssi_ctl1;
+	int8_t ts_rssi_ctl2;
+	int8_t ts_rssi_ext0;
+	int8_t ts_rssi_ext1;
+	int8_t ts_rssi_ext2;
+	u8 pad[3];
+	u32 ba_low;
+	u32 ba_high;
+	u32 evm0;
+	u32 evm1;
+	u32 evm2;
+};
+
+struct ath_rx_status {
+	u32 rs_tstamp;
+	u16 rs_datalen;
+	u8 rs_status;
+	u8 rs_phyerr;
+	int8_t rs_rssi;
+	u8 rs_keyix;
+	u8 rs_rate;
+	u8 rs_antenna;
+	u8 rs_more;
+	int8_t rs_rssi_ctl0;
+	int8_t rs_rssi_ctl1;
+	int8_t rs_rssi_ctl2;
+	int8_t rs_rssi_ext0;
+	int8_t rs_rssi_ext1;
+	int8_t rs_rssi_ext2;
+	u8 rs_isaggr;
+	u8 rs_moreaggr;
+	u8 rs_num_delims;
+	u8 rs_flags;
+	u32 evm0;
+	u32 evm1;
+	u32 evm2;
+};
+
+#define ATH9K_RXERR_CRC           0x01
+#define ATH9K_RXERR_PHY           0x02
+#define ATH9K_RXERR_FIFO          0x04
+#define ATH9K_RXERR_DECRYPT       0x08
+#define ATH9K_RXERR_MIC           0x10
+
+#define ATH9K_RX_MORE             0x01
+#define ATH9K_RX_MORE_AGGR        0x02
+#define ATH9K_RX_GI               0x04
+#define ATH9K_RX_2040             0x08
+#define ATH9K_RX_DELIM_CRC_PRE    0x10
+#define ATH9K_RX_DELIM_CRC_POST   0x20
+#define ATH9K_RX_DECRYPT_BUSY     0x40
+
+#define ATH9K_RXKEYIX_INVALID	((u8)-1)
+#define ATH9K_TXKEYIX_INVALID	((u32)-1)
+
+struct ath_desc {
+	u32 ds_link;
+	u32 ds_data;
+	u32 ds_ctl0;
+	u32 ds_ctl1;
+	u32 ds_hw[20];
+	union {
+		struct ath_tx_status tx;
+		struct ath_rx_status rx;
+		void *stats;
+	} ds_us;
+	void *ds_vdata;
+} __packed;
+
+#define	ds_txstat	ds_us.tx
+#define	ds_rxstat	ds_us.rx
+#define ds_stat		ds_us.stats
+
+#define ATH9K_TXDESC_CLRDMASK		0x0001
+#define ATH9K_TXDESC_NOACK		0x0002
+#define ATH9K_TXDESC_RTSENA		0x0004
+#define ATH9K_TXDESC_CTSENA		0x0008
+#define ATH9K_TXDESC_INTREQ		0x0010
+#define ATH9K_TXDESC_VEOL		0x0020
+#define ATH9K_TXDESC_EXT_ONLY		0x0040
+#define ATH9K_TXDESC_EXT_AND_CTL	0x0080
+#define ATH9K_TXDESC_VMF		0x0100
+#define ATH9K_TXDESC_FRAG_IS_ON 	0x0200
+
+#define ATH9K_RXDESC_INTREQ		0x0020
+
+enum wireless_mode {
+	ATH9K_MODE_11A = 0,
+	ATH9K_MODE_11B = 2,
+	ATH9K_MODE_11G = 3,
+	ATH9K_MODE_11NA_HT20 = 6,
+	ATH9K_MODE_11NG_HT20 = 7,
+	ATH9K_MODE_11NA_HT40PLUS = 8,
+	ATH9K_MODE_11NA_HT40MINUS = 9,
+	ATH9K_MODE_11NG_HT40PLUS = 10,
+	ATH9K_MODE_11NG_HT40MINUS = 11,
+	ATH9K_MODE_MAX
+};
+
+enum ath9k_hw_caps {
+	ATH9K_HW_CAP_CHAN_SPREAD		= BIT(0),
+	ATH9K_HW_CAP_MIC_AESCCM                 = BIT(1),
+	ATH9K_HW_CAP_MIC_CKIP                   = BIT(2),
+	ATH9K_HW_CAP_MIC_TKIP                   = BIT(3),
+	ATH9K_HW_CAP_CIPHER_AESCCM              = BIT(4),
+	ATH9K_HW_CAP_CIPHER_CKIP                = BIT(5),
+	ATH9K_HW_CAP_CIPHER_TKIP                = BIT(6),
+	ATH9K_HW_CAP_VEOL                       = BIT(7),
+	ATH9K_HW_CAP_BSSIDMASK                  = BIT(8),
+	ATH9K_HW_CAP_MCAST_KEYSEARCH            = BIT(9),
+	ATH9K_HW_CAP_CHAN_HALFRATE              = BIT(10),
+	ATH9K_HW_CAP_CHAN_QUARTERRATE           = BIT(11),
+	ATH9K_HW_CAP_HT                         = BIT(12),
+	ATH9K_HW_CAP_GTT                        = BIT(13),
+	ATH9K_HW_CAP_FASTCC                     = BIT(14),
+	ATH9K_HW_CAP_RFSILENT                   = BIT(15),
+	ATH9K_HW_CAP_WOW                        = BIT(16),
+	ATH9K_HW_CAP_CST                        = BIT(17),
+	ATH9K_HW_CAP_ENHANCEDPM                 = BIT(18),
+	ATH9K_HW_CAP_AUTOSLEEP                  = BIT(19),
+	ATH9K_HW_CAP_4KB_SPLITTRANS             = BIT(20),
+	ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT     = BIT(21),
+};
+
+enum ath9k_capability_type {
+	ATH9K_CAP_CIPHER = 0,
+	ATH9K_CAP_TKIP_MIC,
+	ATH9K_CAP_TKIP_SPLIT,
+	ATH9K_CAP_PHYCOUNTERS,
+	ATH9K_CAP_DIVERSITY,
+	ATH9K_CAP_TXPOW,
+	ATH9K_CAP_PHYDIAG,
+	ATH9K_CAP_MCAST_KEYSRCH,
+	ATH9K_CAP_TSF_ADJUST,
+	ATH9K_CAP_WME_TKIPMIC,
+	ATH9K_CAP_RFSILENT,
+	ATH9K_CAP_ANT_CFG_2GHZ,
+	ATH9K_CAP_ANT_CFG_5GHZ
+};
+
+struct ath9k_hw_capabilities {
+	u32 hw_caps; /* ATH9K_HW_CAP_* from ath9k_hw_caps */
+	DECLARE_BITMAP(wireless_modes, ATH9K_MODE_MAX); /* ATH9K_MODE_* */
+	u16 total_queues;
+	u16 keycache_size;
+	u16 low_5ghz_chan, high_5ghz_chan;
+	u16 low_2ghz_chan, high_2ghz_chan;
+	u16 num_mr_retries;
+	u16 rts_aggr_limit;
+	u8 tx_chainmask;
+	u8 rx_chainmask;
+	u16 tx_triglevel_max;
+	u16 reg_cap;
+	u8 num_gpio_pins;
+	u8 num_antcfg_2ghz;
+	u8 num_antcfg_5ghz;
+};
+
+struct ath9k_ops_config {
+	int dma_beacon_response_time;
+	int sw_beacon_response_time;
+	int additional_swba_backoff;
+	int ack_6mb;
+	int cwm_ignore_extcca;
+	u8 pcie_powersave_enable;
+	u8 pcie_l1skp_enable;
+	u8 pcie_clock_req;
+	u32 pcie_waen;
+	int pcie_power_reset;
+	u8 pcie_restore;
+	u8 analog_shiftreg;
+	u8 ht_enable;
+	u32 ofdm_trig_low;
+	u32 ofdm_trig_high;
+	u32 cck_trig_high;
+	u32 cck_trig_low;
+	u32 enable_ani;
+	u8 noise_immunity_level;
+	u32 ofdm_weaksignal_det;
+	u32 cck_weaksignal_thr;
+	u8 spur_immunity_level;
+	u8 firstep_level;
+	int8_t rssi_thr_high;
+	int8_t rssi_thr_low;
+	u16 diversity_control;
+	u16 antenna_switch_swap;
+	int serialize_regmode;
+	int intr_mitigation;
+#define SPUR_DISABLE        	0
+#define SPUR_ENABLE_IOCTL   	1
+#define SPUR_ENABLE_EEPROM  	2
+#define AR_EEPROM_MODAL_SPURS   5
+#define AR_SPUR_5413_1      	1640
+#define AR_SPUR_5413_2      	1200
+#define AR_NO_SPUR      	0x8000
+#define AR_BASE_FREQ_2GHZ   	2300
+#define AR_BASE_FREQ_5GHZ   	4900
+#define AR_SPUR_FEEQ_BOUND_HT40 19
+#define AR_SPUR_FEEQ_BOUND_HT20 10
+	int spurmode;
+	u16 spurchans[AR_EEPROM_MODAL_SPURS][2];
+};
+
+enum ath9k_tx_queue {
+	ATH9K_TX_QUEUE_INACTIVE = 0,
+	ATH9K_TX_QUEUE_DATA,
+	ATH9K_TX_QUEUE_BEACON,
+	ATH9K_TX_QUEUE_CAB,
+	ATH9K_TX_QUEUE_UAPSD,
+	ATH9K_TX_QUEUE_PSPOLL
+};
+
+#define	ATH9K_NUM_TX_QUEUES 10
+
+enum ath9k_tx_queue_subtype {
+	ATH9K_WME_AC_BK = 0,
+	ATH9K_WME_AC_BE,
+	ATH9K_WME_AC_VI,
+	ATH9K_WME_AC_VO,
+	ATH9K_WME_UPSD
+};
+
+enum ath9k_tx_queue_flags {
+	TXQ_FLAG_TXOKINT_ENABLE = 0x0001,
+	TXQ_FLAG_TXERRINT_ENABLE = 0x0001,
+	TXQ_FLAG_TXDESCINT_ENABLE = 0x0002,
+	TXQ_FLAG_TXEOLINT_ENABLE = 0x0004,
+	TXQ_FLAG_TXURNINT_ENABLE = 0x0008,
+	TXQ_FLAG_BACKOFF_DISABLE = 0x0010,
+	TXQ_FLAG_COMPRESSION_ENABLE = 0x0020,
+	TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE = 0x0040,
+	TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE = 0x0080,
+};
+
+#define ATH9K_TXQ_USEDEFAULT ((u32) -1)
+
+#define ATH9K_DECOMP_MASK_SIZE     128
+#define ATH9K_READY_TIME_LO_BOUND  50
+#define ATH9K_READY_TIME_HI_BOUND  96
+
+enum ath9k_pkt_type {
+	ATH9K_PKT_TYPE_NORMAL = 0,
+	ATH9K_PKT_TYPE_ATIM,
+	ATH9K_PKT_TYPE_PSPOLL,
+	ATH9K_PKT_TYPE_BEACON,
+	ATH9K_PKT_TYPE_PROBE_RESP,
+	ATH9K_PKT_TYPE_CHIRP,
+	ATH9K_PKT_TYPE_GRP_POLL,
+};
+
+struct ath9k_tx_queue_info {
+	u32 tqi_ver;
+	enum ath9k_tx_queue tqi_type;
+	enum ath9k_tx_queue_subtype tqi_subtype;
+	enum ath9k_tx_queue_flags tqi_qflags;
+	u32 tqi_priority;
+	u32 tqi_aifs;
+	u32 tqi_cwmin;
+	u32 tqi_cwmax;
+	u16 tqi_shretry;
+	u16 tqi_lgretry;
+	u32 tqi_cbrPeriod;
+	u32 tqi_cbrOverflowLimit;
+	u32 tqi_burstTime;
+	u32 tqi_readyTime;
+	u32 tqi_physCompBuf;
+	u32 tqi_intFlags;
+};
+
+enum ath9k_rx_filter {
+	ATH9K_RX_FILTER_UCAST = 0x00000001,
+	ATH9K_RX_FILTER_MCAST = 0x00000002,
+	ATH9K_RX_FILTER_BCAST = 0x00000004,
+	ATH9K_RX_FILTER_CONTROL = 0x00000008,
+	ATH9K_RX_FILTER_BEACON = 0x00000010,
+	ATH9K_RX_FILTER_PROM = 0x00000020,
+	ATH9K_RX_FILTER_PROBEREQ = 0x00000080,
+	ATH9K_RX_FILTER_PSPOLL = 0x00004000,
+	ATH9K_RX_FILTER_PHYERR = 0x00000100,
+	ATH9K_RX_FILTER_PHYRADAR = 0x00002000,
+};
+
+enum ath9k_int {
+	ATH9K_INT_RX = 0x00000001,
+	ATH9K_INT_RXDESC = 0x00000002,
+	ATH9K_INT_RXNOFRM = 0x00000008,
+	ATH9K_INT_RXEOL = 0x00000010,
+	ATH9K_INT_RXORN = 0x00000020,
+	ATH9K_INT_TX = 0x00000040,
+	ATH9K_INT_TXDESC = 0x00000080,
+	ATH9K_INT_TIM_TIMER = 0x00000100,
+	ATH9K_INT_TXURN = 0x00000800,
+	ATH9K_INT_MIB = 0x00001000,
+	ATH9K_INT_RXPHY = 0x00004000,
+	ATH9K_INT_RXKCM = 0x00008000,
+	ATH9K_INT_SWBA = 0x00010000,
+	ATH9K_INT_BMISS = 0x00040000,
+	ATH9K_INT_BNR = 0x00100000,
+	ATH9K_INT_TIM = 0x00200000,
+	ATH9K_INT_DTIM = 0x00400000,
+	ATH9K_INT_DTIMSYNC = 0x00800000,
+	ATH9K_INT_GPIO = 0x01000000,
+	ATH9K_INT_CABEND = 0x02000000,
+	ATH9K_INT_CST = 0x10000000,
+	ATH9K_INT_GTT = 0x20000000,
+	ATH9K_INT_FATAL = 0x40000000,
+	ATH9K_INT_GLOBAL = 0x80000000,
+	ATH9K_INT_BMISC = ATH9K_INT_TIM |
+		ATH9K_INT_DTIM |
+		ATH9K_INT_DTIMSYNC |
+		ATH9K_INT_CABEND,
+	ATH9K_INT_COMMON = ATH9K_INT_RXNOFRM |
+		ATH9K_INT_RXDESC |
+		ATH9K_INT_RXEOL |
+		ATH9K_INT_RXORN |
+		ATH9K_INT_TXURN |
+		ATH9K_INT_TXDESC |
+		ATH9K_INT_MIB |
+		ATH9K_INT_RXPHY |
+		ATH9K_INT_RXKCM |
+		ATH9K_INT_SWBA |
+		ATH9K_INT_BMISS |
+		ATH9K_INT_GPIO,
+	ATH9K_INT_NOCARD = 0xffffffff
+};
+
+struct ath9k_rate_table {
+	int rateCount;
+	u8 rateCodeToIndex[256];
+	struct {
+		u8 valid;
+		u8 phy;
+		u32 rateKbps;
+		u8 rateCode;
+		u8 shortPreamble;
+		u8 dot11Rate;
+		u8 controlRate;
+		u16 lpAckDuration;
+		u16 spAckDuration;
+	} info[32];
+};
+
+#define ATH9K_RATESERIES_RTS_CTS  0x0001
+#define ATH9K_RATESERIES_2040     0x0002
+#define ATH9K_RATESERIES_HALFGI   0x0004
+
+struct ath9k_11n_rate_series {
+	u32 Tries;
+	u32 Rate;
+	u32 PktDuration;
+	u32 ChSel;
+	u32 RateFlags;
+};
+
+#define CHANNEL_CW_INT    0x00002
+#define CHANNEL_CCK       0x00020
+#define CHANNEL_OFDM      0x00040
+#define CHANNEL_2GHZ      0x00080
+#define CHANNEL_5GHZ      0x00100
+#define CHANNEL_PASSIVE   0x00200
+#define CHANNEL_DYN       0x00400
+#define CHANNEL_HALF      0x04000
+#define CHANNEL_QUARTER   0x08000
+#define CHANNEL_HT20      0x10000
+#define CHANNEL_HT40PLUS  0x20000
+#define CHANNEL_HT40MINUS 0x40000
+
+#define CHANNEL_INTERFERENCE    0x01
+#define CHANNEL_DFS             0x02
+#define CHANNEL_4MS_LIMIT       0x04
+#define CHANNEL_DFS_CLEAR       0x08
+#define CHANNEL_DISALLOW_ADHOC  0x10
+#define CHANNEL_PER_11D_ADHOC   0x20
+
+#define CHANNEL_A           (CHANNEL_5GHZ|CHANNEL_OFDM)
+#define CHANNEL_B           (CHANNEL_2GHZ|CHANNEL_CCK)
+#define CHANNEL_G           (CHANNEL_2GHZ|CHANNEL_OFDM)
+#define CHANNEL_G_HT20      (CHANNEL_2GHZ|CHANNEL_HT20)
+#define CHANNEL_A_HT20      (CHANNEL_5GHZ|CHANNEL_HT20)
+#define CHANNEL_G_HT40PLUS  (CHANNEL_2GHZ|CHANNEL_HT40PLUS)
+#define CHANNEL_G_HT40MINUS (CHANNEL_2GHZ|CHANNEL_HT40MINUS)
+#define CHANNEL_A_HT40PLUS  (CHANNEL_5GHZ|CHANNEL_HT40PLUS)
+#define CHANNEL_A_HT40MINUS (CHANNEL_5GHZ|CHANNEL_HT40MINUS)
+#define CHANNEL_ALL				\
+	(CHANNEL_OFDM|				\
+	 CHANNEL_CCK|				\
+	 CHANNEL_2GHZ |				\
+	 CHANNEL_5GHZ |				\
+	 CHANNEL_HT20 |				\
+	 CHANNEL_HT40PLUS |			\
+	 CHANNEL_HT40MINUS)
+
+struct ath9k_channel {
+	u16 channel;
+	u32 channelFlags;
+	u8 privFlags;
+	int8_t maxRegTxPower;
+	int8_t maxTxPower;
+	int8_t minTxPower;
+	u32 chanmode;
+	int32_t CalValid;
+	bool oneTimeCalsDone;
+	int8_t iCoff;
+	int8_t qCoff;
+	int16_t rawNoiseFloor;
+	int8_t antennaMax;
+	u32 regDmnFlags;
+	u32 conformanceTestLimit[3]; /* 0:11a, 1: 11b, 2:11g */
+#ifdef ATH_NF_PER_CHAN
+	struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
+#endif
+};
+
+#define IS_CHAN_A(_c) ((((_c)->channelFlags & CHANNEL_A) == CHANNEL_A) || \
+       (((_c)->channelFlags & CHANNEL_A_HT20) == CHANNEL_A_HT20) || \
+       (((_c)->channelFlags & CHANNEL_A_HT40PLUS) == CHANNEL_A_HT40PLUS) || \
+       (((_c)->channelFlags & CHANNEL_A_HT40MINUS) == CHANNEL_A_HT40MINUS))
+#define IS_CHAN_B(_c) (((_c)->channelFlags & CHANNEL_B) == CHANNEL_B)
+#define IS_CHAN_G(_c) ((((_c)->channelFlags & (CHANNEL_G)) == CHANNEL_G) || \
+       (((_c)->channelFlags & CHANNEL_G_HT20) == CHANNEL_G_HT20) || \
+       (((_c)->channelFlags & CHANNEL_G_HT40PLUS) == CHANNEL_G_HT40PLUS) || \
+       (((_c)->channelFlags & CHANNEL_G_HT40MINUS) == CHANNEL_G_HT40MINUS))
+#define IS_CHAN_CCK(_c) (((_c)->channelFlags & CHANNEL_CCK) != 0)
+#define IS_CHAN_OFDM(_c) (((_c)->channelFlags & CHANNEL_OFDM) != 0)
+#define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0)
+#define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0)
+#define IS_CHAN_PASSIVE(_c) (((_c)->channelFlags & CHANNEL_PASSIVE) != 0)
+#define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0)
+#define IS_CHAN_QUARTER_RATE(_c) (((_c)->channelFlags & CHANNEL_QUARTER) != 0)
+
+/* These macros check chanmode and not channelFlags */
+#define IS_CHAN_HT20(_c) (((_c)->chanmode == CHANNEL_A_HT20) ||	\
+			  ((_c)->chanmode == CHANNEL_G_HT20))
+#define IS_CHAN_HT40(_c) (((_c)->chanmode == CHANNEL_A_HT40PLUS) ||	\
+			  ((_c)->chanmode == CHANNEL_A_HT40MINUS) ||	\
+			  ((_c)->chanmode == CHANNEL_G_HT40PLUS) ||	\
+			  ((_c)->chanmode == CHANNEL_G_HT40MINUS))
+#define IS_CHAN_HT(_c) (IS_CHAN_HT20((_c)) || IS_CHAN_HT40((_c)))
+
+#define IS_CHAN_IN_PUBLIC_SAFETY_BAND(_c) ((_c) > 4940 && (_c) < 4990)
+#define IS_CHAN_A_5MHZ_SPACED(_c)			\
+	((((_c)->channelFlags & CHANNEL_5GHZ) != 0) &&	\
+	 (((_c)->channel % 20) != 0) &&			\
+	 (((_c)->channel % 10) != 0))
+
+struct ath9k_keyval {
+	u8 kv_type;
+	u8 kv_pad;
+	u16 kv_len;
+	u8 kv_val[16];
+	u8 kv_mic[8];
+	u8 kv_txmic[8];
+};
+
+enum ath9k_key_type {
+	ATH9K_KEY_TYPE_CLEAR,
+	ATH9K_KEY_TYPE_WEP,
+	ATH9K_KEY_TYPE_AES,
+	ATH9K_KEY_TYPE_TKIP,
+};
+
+enum ath9k_cipher {
+	ATH9K_CIPHER_WEP = 0,
+	ATH9K_CIPHER_AES_OCB = 1,
+	ATH9K_CIPHER_AES_CCM = 2,
+	ATH9K_CIPHER_CKIP = 3,
+	ATH9K_CIPHER_TKIP = 4,
+	ATH9K_CIPHER_CLR = 5,
+	ATH9K_CIPHER_MIC = 127
+};
+
+#define AR_EEPROM_EEPCAP_COMPRESS_DIS   0x0001
+#define AR_EEPROM_EEPCAP_AES_DIS        0x0002
+#define AR_EEPROM_EEPCAP_FASTFRAME_DIS  0x0004
+#define AR_EEPROM_EEPCAP_BURST_DIS      0x0008
+#define AR_EEPROM_EEPCAP_MAXQCU         0x01F0
+#define AR_EEPROM_EEPCAP_MAXQCU_S       4
+#define AR_EEPROM_EEPCAP_HEAVY_CLIP_EN  0x0200
+#define AR_EEPROM_EEPCAP_KC_ENTRIES     0xF000
+#define AR_EEPROM_EEPCAP_KC_ENTRIES_S   12
+
+#define AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
+#define AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
+#define AR_EEPROM_EEREGCAP_EN_KK_U2         0x0100
+#define AR_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
+#define AR_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
+#define AR_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
+
+#define AR_EEPROM_EEREGCAP_EN_KK_U1_ODD_PRE4_0  0x4000
+#define AR_EEPROM_EEREGCAP_EN_KK_NEW_11A_PRE4_0 0x8000
+
+#define SD_NO_CTL               0xE0
+#define NO_CTL                  0xff
+#define CTL_MODE_M              7
+#define CTL_11A                 0
+#define CTL_11B                 1
+#define CTL_11G                 2
+#define CTL_2GHT20              5
+#define CTL_5GHT20              6
+#define CTL_2GHT40              7
+#define CTL_5GHT40              8
+
+#define AR_EEPROM_MAC(i)        (0x1d+(i))
+#define EEP_SCALE       100
+#define EEP_DELTA       10
+
+#define AR_EEPROM_RFSILENT_GPIO_SEL     0x001c
+#define AR_EEPROM_RFSILENT_GPIO_SEL_S   2
+#define AR_EEPROM_RFSILENT_POLARITY     0x0002
+#define AR_EEPROM_RFSILENT_POLARITY_S   1
+
+#define CTRY_DEBUG 0x1ff
+#define	CTRY_DEFAULT 0
+
+enum reg_ext_bitmap {
+	REG_EXT_JAPAN_MIDBAND = 1,
+	REG_EXT_FCC_DFS_HT40 = 2,
+	REG_EXT_JAPAN_NONDFS_HT40 = 3,
+	REG_EXT_JAPAN_DFS_HT40 = 4
+};
+
+struct ath9k_country_entry {
+	u16 countryCode;
+	u16 regDmnEnum;
+	u16 regDmn5G;
+	u16 regDmn2G;
+	u8 isMultidomain;
+	u8 iso[3];
+};
+
+#define REG_WRITE(_ah, _reg, _val) iowrite32(_val, _ah->ah_sh + _reg)
+#define REG_READ(_ah, _reg) ioread32(_ah->ah_sh + _reg)
+
+#define SM(_v, _f)  (((_v) << _f##_S) & _f)
+#define MS(_v, _f)  (((_v) & _f) >> _f##_S)
+#define REG_RMW(_a, _r, _set, _clr)    \
+	REG_WRITE(_a, _r, (REG_READ(_a, _r) & ~(_clr)) | (_set))
+#define REG_RMW_FIELD(_a, _r, _f, _v) \
+	REG_WRITE(_a, _r, \
+	(REG_READ(_a, _r) & ~_f) | (((_v) << _f##_S) & _f))
+#define REG_SET_BIT(_a, _r, _f) \
+	REG_WRITE(_a, _r, REG_READ(_a, _r) | _f)
+#define REG_CLR_BIT(_a, _r, _f) \
+	REG_WRITE(_a, _r, REG_READ(_a, _r) & ~_f)
+
+#define ATH9K_COMP_BUF_MAX_SIZE   9216
+#define ATH9K_COMP_BUF_ALIGN_SIZE 512
+
+#define ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS   0x00000001
+
+#define INIT_AIFS       2
+#define INIT_CWMIN      15
+#define INIT_CWMIN_11B  31
+#define INIT_CWMAX      1023
+#define INIT_SH_RETRY   10
+#define INIT_LG_RETRY   10
+#define INIT_SSH_RETRY  32
+#define INIT_SLG_RETRY  32
+
+#define WLAN_CTRL_FRAME_SIZE (2+2+6+4)
+
+#define ATH_AMPDU_LIMIT_MAX      (64 * 1024 - 1)
+#define ATH_AMPDU_LIMIT_DEFAULT  ATH_AMPDU_LIMIT_MAX
+
+#define IEEE80211_WEP_IVLEN      3
+#define IEEE80211_WEP_KIDLEN     1
+#define IEEE80211_WEP_CRCLEN     4
+#define IEEE80211_MAX_MPDU_LEN  (3840 + FCS_LEN +		\
+				 (IEEE80211_WEP_IVLEN +		\
+				  IEEE80211_WEP_KIDLEN +	\
+				  IEEE80211_WEP_CRCLEN))
+#define IEEE80211_MAX_LEN       (2300 + FCS_LEN +		\
+				 (IEEE80211_WEP_IVLEN +		\
+				  IEEE80211_WEP_KIDLEN +	\
+				  IEEE80211_WEP_CRCLEN))
+
+#define MAX_REG_ADD_COUNT   129
+#define MAX_RATE_POWER 63
+
+enum ath9k_power_mode {
+	ATH9K_PM_AWAKE = 0,
+	ATH9K_PM_FULL_SLEEP,
+	ATH9K_PM_NETWORK_SLEEP,
+	ATH9K_PM_UNDEFINED
+};
+
+struct ath9k_mib_stats {
+	u32 ackrcv_bad;
+	u32 rts_bad;
+	u32 rts_good;
+	u32 fcs_bad;
+	u32 beacons;
+};
+
+enum ath9k_ant_setting {
+	ATH9K_ANT_VARIABLE = 0,
+	ATH9K_ANT_FIXED_A,
+	ATH9K_ANT_FIXED_B
+};
+
+enum ath9k_opmode {
+	ATH9K_M_STA = 1,
+	ATH9K_M_IBSS = 0,
+	ATH9K_M_HOSTAP = 6,
+	ATH9K_M_MONITOR = 8
+};
+
+#define ATH9K_SLOT_TIME_6 6
+#define ATH9K_SLOT_TIME_9 9
+#define ATH9K_SLOT_TIME_20 20
+
+enum ath9k_ht_macmode {
+	ATH9K_HT_MACMODE_20 = 0,
+	ATH9K_HT_MACMODE_2040 = 1,
+};
+
+enum ath9k_ht_extprotspacing {
+	ATH9K_HT_EXTPROTSPACING_20 = 0,
+	ATH9K_HT_EXTPROTSPACING_25 = 1,
+};
+
+struct ath9k_ht_cwm {
+	enum ath9k_ht_macmode ht_macmode;
+	enum ath9k_ht_extprotspacing ht_extprotspacing;
+};
+
+enum ath9k_ani_cmd {
+	ATH9K_ANI_PRESENT = 0x1,
+	ATH9K_ANI_NOISE_IMMUNITY_LEVEL = 0x2,
+	ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION = 0x4,
+	ATH9K_ANI_CCK_WEAK_SIGNAL_THR = 0x8,
+	ATH9K_ANI_FIRSTEP_LEVEL = 0x10,
+	ATH9K_ANI_SPUR_IMMUNITY_LEVEL = 0x20,
+	ATH9K_ANI_MODE = 0x40,
+	ATH9K_ANI_PHYERR_RESET = 0x80,
+	ATH9K_ANI_ALL = 0xff
+};
+
+enum phytype {
+	PHY_DS,
+	PHY_FH,
+	PHY_OFDM,
+	PHY_HT,
+};
+#define PHY_CCK PHY_DS
+
+enum start_adhoc_option {
+	START_ADHOC_NO_11A,
+	START_ADHOC_PER_11D,
+	START_ADHOC_IN_11A,
+	START_ADHOC_IN_11B,
+};
+
+enum ath9k_tp_scale {
+	ATH9K_TP_SCALE_MAX = 0,
+	ATH9K_TP_SCALE_50,
+	ATH9K_TP_SCALE_25,
+	ATH9K_TP_SCALE_12,
+	ATH9K_TP_SCALE_MIN
+};
+
+enum ser_reg_mode {
+	SER_REG_MODE_OFF = 0,
+	SER_REG_MODE_ON = 1,
+	SER_REG_MODE_AUTO = 2,
+};
+
+#define AR_PHY_CCA_MAX_GOOD_VALUE      		-85
+#define AR_PHY_CCA_MAX_HIGH_VALUE      		-62
+#define AR_PHY_CCA_MIN_BAD_VALUE       		-121
+#define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT     3
+#define AR_PHY_CCA_FILTERWINDOW_LENGTH          5
+
+#define ATH9K_NF_CAL_HIST_MAX           5
+#define NUM_NF_READINGS                 6
+
+struct ath9k_nfcal_hist {
+	int16_t nfCalBuffer[ATH9K_NF_CAL_HIST_MAX];
+	u8 currIndex;
+	int16_t privNF;
+	u8 invalidNFcount;
+};
+
+struct ath9k_beacon_state {
+	u32 bs_nexttbtt;
+	u32 bs_nextdtim;
+	u32 bs_intval;
+#define ATH9K_BEACON_PERIOD       0x0000ffff
+#define ATH9K_BEACON_ENA          0x00800000
+#define ATH9K_BEACON_RESET_TSF    0x01000000
+	u32 bs_dtimperiod;
+	u16 bs_cfpperiod;
+	u16 bs_cfpmaxduration;
+	u32 bs_cfpnext;
+	u16 bs_timoffset;
+	u16 bs_bmissthreshold;
+	u32 bs_sleepduration;
+};
+
+struct ath9k_node_stats {
+	u32 ns_avgbrssi;
+	u32 ns_avgrssi;
+	u32 ns_avgtxrssi;
+	u32 ns_avgtxrate;
+};
+
+#define ATH9K_RSSI_EP_MULTIPLIER  (1<<7)
+
+enum ath9k_gpio_output_mux_type {
+	ATH9K_GPIO_OUTPUT_MUX_AS_OUTPUT,
+	ATH9K_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED,
+	ATH9K_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED,
+	ATH9K_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED,
+	ATH9K_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED,
+	ATH9K_GPIO_OUTPUT_MUX_NUM_ENTRIES
+};
+
+enum {
+	ATH9K_RESET_POWER_ON,
+	ATH9K_RESET_WARM,
+	ATH9K_RESET_COLD,
+};
+
+#define AH_USE_EEPROM   0x1
+
+struct ath_hal {
+	u32 ah_magic;
+	u16 ah_devid;
+	u16 ah_subvendorid;
+	struct ath_softc *ah_sc;
+	void __iomem *ah_sh;
+	u16 ah_countryCode;
+	u32 ah_macVersion;
+	u16 ah_macRev;
+	u16 ah_phyRev;
+	u16 ah_analog5GhzRev;
+	u16 ah_analog2GhzRev;
+	u8 ah_decompMask[ATH9K_DECOMP_MASK_SIZE];
+	u32 ah_flags;
+	enum ath9k_opmode ah_opmode;
+	struct ath9k_ops_config ah_config;
+	struct ath9k_hw_capabilities ah_caps;
+	int16_t ah_powerLimit;
+	u16 ah_maxPowerLevel;
+	u32 ah_tpScale;
+	u16 ah_currentRD;
+	u16 ah_currentRDExt;
+	u16 ah_currentRDInUse;
+	u16 ah_currentRD5G;
+	u16 ah_currentRD2G;
+	char ah_iso[4];
+	enum start_adhoc_option ah_adHocMode;
+	bool ah_commonMode;
+	struct ath9k_channel ah_channels[150];
+	u32 ah_nchan;
+	struct ath9k_channel *ah_curchan;
+	u16 ah_rfsilent;
+	bool ah_rfkillEnabled;
+	bool ah_isPciExpress;
+	u16 ah_txTrigLevel;
+#ifndef ATH_NF_PER_CHAN
+	struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
+#endif
+};
+
+struct chan_centers {
+	u16 synth_center;
+	u16 ctl_center;
+	u16 ext_center;
+};
+
+int ath_hal_getcapability(struct ath_hal *ah,
+			  enum ath9k_capability_type type,
+			  u32 capability,
+			  u32 *result);
+const struct ath9k_rate_table *ath9k_hw_getratetable(struct ath_hal *ah,
+						     u32 mode);
+void ath9k_hw_detach(struct ath_hal *ah);
+struct ath_hal *ath9k_hw_attach(u16 devid,
+				struct ath_softc *sc,
+				void __iomem *mem,
+				int *error);
+bool ath9k_regd_init_channels(struct ath_hal *ah,
+			      u32 maxchans, u32 *nchans,
+			      u8 *regclassids,
+			      u32 maxregids, u32 *nregids,
+			      u16 cc,
+			      bool enableOutdoor,
+			      bool enableExtendedChannels);
+u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags);
+enum ath9k_int ath9k_hw_set_interrupts(struct ath_hal *ah,
+				     enum ath9k_int ints);
+bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode,
+		    struct ath9k_channel *chan,
+		    enum ath9k_ht_macmode macmode,
+		    u8 txchainmask, u8 rxchainmask,
+		    enum ath9k_ht_extprotspacing extprotspacing,
+		    bool bChannelChange,
+		    int *status);
+bool ath9k_hw_phy_disable(struct ath_hal *ah);
+void ath9k_hw_reset_calvalid(struct ath_hal *ah, struct ath9k_channel *chan,
+			     bool *isCalDone);
+void ath9k_hw_ani_monitor(struct ath_hal *ah,
+			  const struct ath9k_node_stats *stats,
+			  struct ath9k_channel *chan);
+bool ath9k_hw_calibrate(struct ath_hal *ah,
+			struct ath9k_channel *chan,
+			u8 rxchainmask,
+			bool longcal,
+			bool *isCalDone);
+int16_t ath9k_hw_getchan_noise(struct ath_hal *ah,
+			       struct ath9k_channel *chan);
+void ath9k_hw_write_associd(struct ath_hal *ah, const u8 *bssid,
+			    u16 assocId);
+void ath9k_hw_setrxfilter(struct ath_hal *ah, u32 bits);
+void ath9k_hw_write_associd(struct ath_hal *ah, const u8 *bssid,
+			    u16 assocId);
+bool ath9k_hw_stoptxdma(struct ath_hal *ah, u32 q);
+void ath9k_hw_reset_tsf(struct ath_hal *ah);
+bool ath9k_hw_keyisvalid(struct ath_hal *ah, u16 entry);
+bool ath9k_hw_keysetmac(struct ath_hal *ah, u16 entry,
+			const u8 *mac);
+bool ath9k_hw_set_keycache_entry(struct ath_hal *ah,
+				 u16 entry,
+				 const struct ath9k_keyval *k,
+				 const u8 *mac,
+				 int xorKey);
+bool ath9k_hw_set_tsfadjust(struct ath_hal *ah,
+			    u32 setting);
+void ath9k_hw_configpcipowersave(struct ath_hal *ah, int restore);
+bool ath9k_hw_intrpend(struct ath_hal *ah);
+bool ath9k_hw_getisr(struct ath_hal *ah, enum ath9k_int *masked);
+bool ath9k_hw_updatetxtriglevel(struct ath_hal *ah,
+				bool bIncTrigLevel);
+void ath9k_hw_procmibevent(struct ath_hal *ah,
+			   const struct ath9k_node_stats *stats);
+bool ath9k_hw_setrxabort(struct ath_hal *ah, bool set);
+void ath9k_hw_set11nmac2040(struct ath_hal *ah, enum ath9k_ht_macmode mode);
+bool ath9k_hw_phycounters(struct ath_hal *ah);
+bool ath9k_hw_keyreset(struct ath_hal *ah, u16 entry);
+bool ath9k_hw_getcapability(struct ath_hal *ah,
+			    enum ath9k_capability_type type,
+			    u32 capability,
+			    u32 *result);
+bool ath9k_hw_setcapability(struct ath_hal *ah,
+			    enum ath9k_capability_type type,
+			    u32 capability,
+			    u32 setting,
+			    int *status);
+u32 ath9k_hw_getdefantenna(struct ath_hal *ah);
+void ath9k_hw_getmac(struct ath_hal *ah, u8 *mac);
+void ath9k_hw_getbssidmask(struct ath_hal *ah, u8 *mask);
+bool ath9k_hw_setbssidmask(struct ath_hal *ah,
+			   const u8 *mask);
+bool ath9k_hw_setpower(struct ath_hal *ah,
+		       enum ath9k_power_mode mode);
+enum ath9k_int ath9k_hw_intrget(struct ath_hal *ah);
+u64 ath9k_hw_gettsf64(struct ath_hal *ah);
+u32 ath9k_hw_getdefantenna(struct ath_hal *ah);
+bool ath9k_hw_setslottime(struct ath_hal *ah, u32 us);
+bool ath9k_hw_setantennaswitch(struct ath_hal *ah,
+			       enum ath9k_ant_setting settings,
+			       struct ath9k_channel *chan,
+			       u8 *tx_chainmask,
+			       u8 *rx_chainmask,
+			       u8 *antenna_cfgd);
+void ath9k_hw_setantenna(struct ath_hal *ah, u32 antenna);
+int ath9k_hw_select_antconfig(struct ath_hal *ah,
+			      u32 cfg);
+bool ath9k_hw_puttxbuf(struct ath_hal *ah, u32 q,
+		       u32 txdp);
+bool ath9k_hw_txstart(struct ath_hal *ah, u32 q);
+u16 ath9k_hw_computetxtime(struct ath_hal *ah,
+				 const struct ath9k_rate_table *rates,
+				 u32 frameLen, u16 rateix,
+				 bool shortPreamble);
+void ath9k_hw_set11n_ratescenario(struct ath_hal *ah, struct ath_desc *ds,
+				  struct ath_desc *lastds,
+				  u32 durUpdateEn, u32 rtsctsRate,
+				  u32 rtsctsDuration,
+				  struct ath9k_11n_rate_series series[],
+				  u32 nseries, u32 flags);
+void ath9k_hw_set11n_burstduration(struct ath_hal *ah,
+				   struct ath_desc *ds,
+				   u32 burstDuration);
+void ath9k_hw_cleartxdesc(struct ath_hal *ah, struct ath_desc *ds);
+u32 ath9k_hw_reverse_bits(u32 val, u32 n);
+bool ath9k_hw_resettxqueue(struct ath_hal *ah, u32 q);
+u32 ath9k_regd_get_ctl(struct ath_hal *ah, struct ath9k_channel *chan);
+u32 ath9k_regd_get_antenna_allowed(struct ath_hal *ah,
+				     struct ath9k_channel *chan);
+u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags);
+bool ath9k_hw_get_txq_props(struct ath_hal *ah, int q,
+			    struct ath9k_tx_queue_info *qinfo);
+bool ath9k_hw_set_txq_props(struct ath_hal *ah, int q,
+			    const struct ath9k_tx_queue_info *qinfo);
+struct ath9k_channel *ath9k_regd_check_channel(struct ath_hal *ah,
+					      const struct ath9k_channel *c);
+void ath9k_hw_set11n_txdesc(struct ath_hal *ah, struct ath_desc *ds,
+			    u32 pktLen, enum ath9k_pkt_type type,
+			    u32 txPower, u32 keyIx,
+			    enum ath9k_key_type keyType, u32 flags);
+bool ath9k_hw_filltxdesc(struct ath_hal *ah, struct ath_desc *ds,
+			 u32 segLen, bool firstSeg,
+			 bool lastSeg,
+			 const struct ath_desc *ds0);
+u32 ath9k_hw_GetMibCycleCountsPct(struct ath_hal *ah,
+					u32 *rxc_pcnt,
+					u32 *rxf_pcnt,
+					u32 *txf_pcnt);
+void ath9k_hw_dmaRegDump(struct ath_hal *ah);
+void ath9k_hw_beaconinit(struct ath_hal *ah,
+			 u32 next_beacon, u32 beacon_period);
+void ath9k_hw_set_sta_beacon_timers(struct ath_hal *ah,
+				    const struct ath9k_beacon_state *bs);
+bool ath9k_hw_setuprxdesc(struct ath_hal *ah, struct ath_desc *ds,
+			  u32 size, u32 flags);
+void ath9k_hw_putrxbuf(struct ath_hal *ah, u32 rxdp);
+void ath9k_hw_rxena(struct ath_hal *ah);
+void ath9k_hw_setopmode(struct ath_hal *ah);
+bool ath9k_hw_setmac(struct ath_hal *ah, const u8 *mac);
+void ath9k_hw_setmcastfilter(struct ath_hal *ah, u32 filter0,
+			     u32 filter1);
+u32 ath9k_hw_getrxfilter(struct ath_hal *ah);
+void ath9k_hw_startpcureceive(struct ath_hal *ah);
+void ath9k_hw_stoppcurecv(struct ath_hal *ah);
+bool ath9k_hw_stopdmarecv(struct ath_hal *ah);
+int ath9k_hw_rxprocdesc(struct ath_hal *ah,
+			struct ath_desc *ds, u32 pa,
+			struct ath_desc *nds, u64 tsf);
+u32 ath9k_hw_gettxbuf(struct ath_hal *ah, u32 q);
+int ath9k_hw_txprocdesc(struct ath_hal *ah,
+			struct ath_desc *ds);
+void ath9k_hw_set11n_aggr_middle(struct ath_hal *ah, struct ath_desc *ds,
+				 u32 numDelims);
+void ath9k_hw_set11n_aggr_first(struct ath_hal *ah, struct ath_desc *ds,
+				u32 aggrLen);
+void ath9k_hw_set11n_aggr_last(struct ath_hal *ah, struct ath_desc *ds);
+bool ath9k_hw_releasetxqueue(struct ath_hal *ah, u32 q);
+void ath9k_hw_gettxintrtxqs(struct ath_hal *ah, u32 *txqs);
+void ath9k_hw_clr11n_aggr(struct ath_hal *ah, struct ath_desc *ds);
+void ath9k_hw_set11n_virtualmorefrag(struct ath_hal *ah,
+				     struct ath_desc *ds, u32 vmf);
+bool ath9k_hw_set_txpowerlimit(struct ath_hal *ah, u32 limit);
+bool ath9k_regd_is_public_safety_sku(struct ath_hal *ah);
+int ath9k_hw_setuptxqueue(struct ath_hal *ah, enum ath9k_tx_queue type,
+			  const struct ath9k_tx_queue_info *qinfo);
+u32 ath9k_hw_numtxpending(struct ath_hal *ah, u32 q);
+const char *ath9k_hw_probe(u16 vendorid, u16 devid);
+bool ath9k_hw_disable(struct ath_hal *ah);
+void ath9k_hw_rfdetach(struct ath_hal *ah);
+void ath9k_hw_get_channel_centers(struct ath_hal *ah,
+				  struct ath9k_channel *chan,
+				  struct chan_centers *centers);
+bool ath9k_get_channel_edges(struct ath_hal *ah,
+			     u16 flags, u16 *low,
+			     u16 *high);
+#endif
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
new file mode 100644
index 00000000000..00a0eaa0886
--- /dev/null
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -0,0 +1,992 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /* Implementation of beacon processing. */
+
+#include <asm/unaligned.h>
+#include "core.h"
+
+/*
+ *  Configure parameters for the beacon queue
+ *
+ *  This function will modify certain transmit queue properties depending on
+ *  the operating mode of the station (AP or AdHoc).  Parameters are AIFS
+ *  settings and channel width min/max
+*/
+
+static int ath_beaconq_config(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath9k_tx_queue_info qi;
+
+	ath9k_hw_get_txq_props(ah, sc->sc_bhalq, &qi);
+	if (sc->sc_opmode == ATH9K_M_HOSTAP) {
+		/* Always burst out beacon and CAB traffic. */
+		qi.tqi_aifs = 1;
+		qi.tqi_cwmin = 0;
+		qi.tqi_cwmax = 0;
+	} else {
+		/* Adhoc mode; important thing is to use 2x cwmin. */
+		qi.tqi_aifs = sc->sc_beacon_qi.tqi_aifs;
+		qi.tqi_cwmin = 2*sc->sc_beacon_qi.tqi_cwmin;
+		qi.tqi_cwmax = sc->sc_beacon_qi.tqi_cwmax;
+	}
+
+	if (!ath9k_hw_set_txq_props(ah, sc->sc_bhalq, &qi)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to update h/w beacon queue parameters\n",
+			__func__);
+		return 0;
+	} else {
+		ath9k_hw_resettxqueue(ah, sc->sc_bhalq); /* push to h/w */
+		return 1;
+	}
+}
+
+/*
+ *  Setup the beacon frame for transmit.
+ *
+ *  Associates the beacon frame buffer with a transmit descriptor.  Will set
+ *  up all required antenna switch parameters, rate codes, and channel flags.
+ *  Beacons are always sent out at the lowest rate, and are not retried.
+*/
+
+static void ath_beacon_setup(struct ath_softc *sc,
+	struct ath_vap *avp, struct ath_buf *bf)
+{
+	struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_desc *ds;
+	int flags, antenna;
+	const struct ath9k_rate_table *rt;
+	u8 rix, rate;
+	int ctsrate = 0;
+	int ctsduration = 0;
+	struct ath9k_11n_rate_series  series[4];
+
+	DPRINTF(sc, ATH_DBG_BEACON, "%s: m %p len %u\n",
+		__func__, skb, skb->len);
+
+	/* setup descriptors */
+	ds = bf->bf_desc;
+
+	flags = ATH9K_TXDESC_NOACK;
+
+	if (sc->sc_opmode == ATH9K_M_IBSS &&
+	    (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
+		ds->ds_link = bf->bf_daddr; /* self-linked */
+		flags |= ATH9K_TXDESC_VEOL;
+		/* Let hardware handle antenna switching. */
+		antenna = 0;
+	} else {
+		ds->ds_link = 0;
+		/*
+		 * Switch antenna every beacon.
+		 * Should only switch every beacon period, not for every
+		 * SWBA's
+		 * XXX assumes two antenna
+		 */
+		antenna = ((sc->ast_be_xmit / sc->sc_nbcnvaps) & 1 ? 2 : 1);
+	}
+
+	ds->ds_data = bf->bf_buf_addr;
+
+	/*
+	 * Calculate rate code.
+	 * XXX everything at min xmit rate
+	 */
+	rix = 0;
+	rt = sc->sc_currates;
+	rate = rt->info[rix].rateCode;
+	if (sc->sc_flags & ATH_PREAMBLE_SHORT)
+		rate |= rt->info[rix].shortPreamble;
+
+	ath9k_hw_set11n_txdesc(ah, ds
+			      , skb->len + FCS_LEN /* frame length */
+			      , ATH9K_PKT_TYPE_BEACON /* Atheros packet type */
+			      , avp->av_btxctl.txpower /* txpower XXX */
+			      , ATH9K_TXKEYIX_INVALID /* no encryption */
+			      , ATH9K_KEY_TYPE_CLEAR /* no encryption */
+			      , flags /* no ack, veol for beacons */
+		);
+
+	/* NB: beacon's BufLen must be a multiple of 4 bytes */
+	ath9k_hw_filltxdesc(ah, ds
+			   , roundup(skb->len, 4) /* buffer length */
+			   , true /* first segment */
+			   , true /* last segment */
+			   , ds /* first descriptor */
+		);
+
+	memzero(series, sizeof(struct ath9k_11n_rate_series) * 4);
+	series[0].Tries = 1;
+	series[0].Rate = rate;
+	series[0].ChSel = sc->sc_tx_chainmask;
+	series[0].RateFlags = (ctsrate) ? ATH9K_RATESERIES_RTS_CTS : 0;
+	ath9k_hw_set11n_ratescenario(ah, ds, ds, 0,
+		ctsrate, ctsduration, series, 4, 0);
+}
+
+/* Move everything from the vap's mcast queue to the hardware cab queue.
+ * Caller must hold mcasq lock and cabq lock
+ * XXX MORE_DATA bit?
+ */
+static void empty_mcastq_into_cabq(struct ath_hal *ah,
+	struct ath_txq *mcastq, struct ath_txq *cabq)
+{
+	struct ath_buf *bfmcast;
+
+	BUG_ON(list_empty(&mcastq->axq_q));
+
+	bfmcast = list_first_entry(&mcastq->axq_q, struct ath_buf, list);
+
+	/* link the descriptors */
+	if (!cabq->axq_link)
+		ath9k_hw_puttxbuf(ah, cabq->axq_qnum, bfmcast->bf_daddr);
+	else
+		*cabq->axq_link = bfmcast->bf_daddr;
+
+	/* append the private vap mcast list to  the cabq */
+
+	cabq->axq_depth	+= mcastq->axq_depth;
+	cabq->axq_totalqueued += mcastq->axq_totalqueued;
+	cabq->axq_linkbuf = mcastq->axq_linkbuf;
+	cabq->axq_link = mcastq->axq_link;
+	list_splice_tail_init(&mcastq->axq_q, &cabq->axq_q);
+	mcastq->axq_depth = 0;
+	mcastq->axq_totalqueued = 0;
+	mcastq->axq_linkbuf = NULL;
+	mcastq->axq_link = NULL;
+}
+
+/* This is only run at DTIM. We move everything from the vap's mcast queue
+ * to the hardware cab queue. Caller must hold the mcastq lock. */
+static void trigger_mcastq(struct ath_hal *ah,
+	struct ath_txq *mcastq, struct ath_txq *cabq)
+{
+	spin_lock_bh(&cabq->axq_lock);
+
+	if (!list_empty(&mcastq->axq_q))
+		empty_mcastq_into_cabq(ah, mcastq, cabq);
+
+	/* cabq is gated by beacon so it is safe to start here */
+	if (!list_empty(&cabq->axq_q))
+		ath9k_hw_txstart(ah, cabq->axq_qnum);
+
+	spin_unlock_bh(&cabq->axq_lock);
+}
+
+/*
+ *  Generate beacon frame and queue cab data for a vap.
+ *
+ *  Updates the contents of the beacon frame.  It is assumed that the buffer for
+ *  the beacon frame has been allocated in the ATH object, and simply needs to
+ *  be filled for this cycle.  Also, any CAB (crap after beacon?) traffic will
+ *  be added to the beacon frame at this point.
+*/
+static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf;
+	struct ath_vap *avp;
+	struct sk_buff *skb;
+	int cabq_depth;
+	int mcastq_depth;
+	int is_beacon_dtim = 0;
+	unsigned int curlen;
+	struct ath_txq *cabq;
+	struct ath_txq *mcastq;
+	struct ieee80211_tx_info *info;
+	avp = sc->sc_vaps[if_id];
+
+	mcastq = &avp->av_mcastq;
+	cabq = sc->sc_cabq;
+
+	ASSERT(avp);
+
+	if (avp->av_bcbuf == NULL) {
+		DPRINTF(sc, ATH_DBG_BEACON, "%s: avp=%p av_bcbuf=%p\n",
+			__func__, avp, avp->av_bcbuf);
+		return NULL;
+	}
+	bf = avp->av_bcbuf;
+	skb = (struct sk_buff *) bf->bf_mpdu;
+
+	/*
+	 * Update dynamic beacon contents.  If this returns
+	 * non-zero then we need to remap the memory because
+	 * the beacon frame changed size (probably because
+	 * of the TIM bitmap).
+	 */
+	curlen = skb->len;
+
+	info = IEEE80211_SKB_CB(skb);
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		/*
+		 * TODO: make sure the seq# gets assigned properly (vs. other
+		 * TX frames)
+		 */
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		sc->seq_no += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+	}
+
+	/* XXX: spin_lock_bh should not be used here, but sparse bitches
+	 * otherwise. We should fix sparse :) */
+	spin_lock_bh(&mcastq->axq_lock);
+	mcastq_depth = avp->av_mcastq.axq_depth;
+
+	if (ath_update_beacon(sc, if_id, &avp->av_boff, skb, mcastq_depth) ==
+	    1) {
+		ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE,
+				     get_dma_mem_context(bf, bf_dmacontext));
+		bf->bf_buf_addr = ath_skb_map_single(sc, skb, PCI_DMA_TODEVICE,
+			get_dma_mem_context(bf, bf_dmacontext));
+	} else {
+		pci_dma_sync_single_for_cpu(sc->pdev,
+					    bf->bf_buf_addr,
+					    skb_tailroom(skb),
+					    PCI_DMA_TODEVICE);
+	}
+
+	/*
+	 * if the CABQ traffic from previous DTIM is pending and the current
+	 *  beacon is also a DTIM.
+	 *  1) if there is only one vap let the cab traffic continue.
+	 *  2) if there are more than one vap and we are using staggered
+	 *     beacons, then drain the cabq by dropping all the frames in
+	 *     the cabq so that the current vaps cab traffic can be scheduled.
+	 */
+	spin_lock_bh(&cabq->axq_lock);
+	cabq_depth = cabq->axq_depth;
+	spin_unlock_bh(&cabq->axq_lock);
+
+	is_beacon_dtim = avp->av_boff.bo_tim[4] & 1;
+
+	if (mcastq_depth && is_beacon_dtim && cabq_depth) {
+		/*
+		 * Unlock the cabq lock as ath_tx_draintxq acquires
+		 * the lock again which is a common function and that
+		 * acquires txq lock inside.
+		 */
+		if (sc->sc_nvaps > 1) {
+			ath_tx_draintxq(sc, cabq, false);
+			DPRINTF(sc, ATH_DBG_BEACON,
+				"%s: flush previous cabq traffic\n", __func__);
+		}
+	}
+
+	/* Construct tx descriptor. */
+	ath_beacon_setup(sc, avp, bf);
+
+	/*
+	 * Enable the CAB queue before the beacon queue to
+	 * insure cab frames are triggered by this beacon.
+	 */
+	if (is_beacon_dtim)
+		trigger_mcastq(ah, mcastq, cabq);
+
+	spin_unlock_bh(&mcastq->axq_lock);
+	return bf;
+}
+
+/*
+ * Startup beacon transmission for adhoc mode when they are sent entirely
+ * by the hardware using the self-linked descriptor + veol trick.
+*/
+
+static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf;
+	struct ath_vap *avp;
+	struct sk_buff *skb;
+
+	avp = sc->sc_vaps[if_id];
+	ASSERT(avp);
+
+	if (avp->av_bcbuf == NULL) {
+		DPRINTF(sc, ATH_DBG_BEACON, "%s: avp=%p av_bcbuf=%p\n",
+			__func__, avp, avp != NULL ? avp->av_bcbuf : NULL);
+		return;
+	}
+	bf = avp->av_bcbuf;
+	skb = (struct sk_buff *) bf->bf_mpdu;
+
+	/* Construct tx descriptor. */
+	ath_beacon_setup(sc, avp, bf);
+
+	/* NB: caller is known to have already stopped tx dma */
+	ath9k_hw_puttxbuf(ah, sc->sc_bhalq, bf->bf_daddr);
+	ath9k_hw_txstart(ah, sc->sc_bhalq);
+	DPRINTF(sc, ATH_DBG_BEACON, "%s: TXDP%u = %llx (%p)\n", __func__,
+		sc->sc_bhalq, ito64(bf->bf_daddr), bf->bf_desc);
+}
+
+/*
+ *  Setup a h/w transmit queue for beacons.
+ *
+ *  This function allocates an information structure (struct ath9k_txq_info)
+ *  on the stack, sets some specific parameters (zero out channel width
+ *  min/max, and enable aifs). The info structure does not need to be
+ *  persistant.
+*/
+
+int ath_beaconq_setup(struct ath_hal *ah)
+{
+	struct ath9k_tx_queue_info qi;
+
+	memzero(&qi, sizeof(qi));
+	qi.tqi_aifs = 1;
+	qi.tqi_cwmin = 0;
+	qi.tqi_cwmax = 0;
+	/* NB: don't enable any interrupts */
+	return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
+}
+
+
+/*
+ *  Allocate and setup an initial beacon frame.
+ *
+ *  Allocate a beacon state variable for a specific VAP instance created on
+ *  the ATH interface.  This routine also calculates the beacon "slot" for
+ *  staggared beacons in the mBSSID case.
+*/
+
+int ath_beacon_alloc(struct ath_softc *sc, int if_id)
+{
+	struct ath_vap *avp;
+	struct ieee80211_hdr *wh;
+	struct ath_buf *bf;
+	struct sk_buff *skb;
+
+	avp = sc->sc_vaps[if_id];
+	ASSERT(avp);
+
+	/* Allocate a beacon descriptor if we haven't done so. */
+	if (!avp->av_bcbuf) {
+		/*
+		 * Allocate beacon state for hostap/ibss.  We know
+		 * a buffer is available.
+		 */
+
+		avp->av_bcbuf = list_first_entry(&sc->sc_bbuf,
+				struct ath_buf, list);
+		list_del(&avp->av_bcbuf->list);
+
+		if (sc->sc_opmode == ATH9K_M_HOSTAP ||
+		    !(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
+			int slot;
+			/*
+			 * Assign the vap to a beacon xmit slot. As
+			 * above, this cannot fail to find one.
+			 */
+			avp->av_bslot = 0;
+			for (slot = 0; slot < ATH_BCBUF; slot++)
+				if (sc->sc_bslot[slot] == ATH_IF_ID_ANY) {
+					/*
+					 * XXX hack, space out slots to better
+					 * deal with misses
+					 */
+					if (slot+1 < ATH_BCBUF &&
+					    sc->sc_bslot[slot+1] ==
+						ATH_IF_ID_ANY) {
+						avp->av_bslot = slot+1;
+						break;
+					}
+					avp->av_bslot = slot;
+					/* NB: keep looking for a double slot */
+				}
+			BUG_ON(sc->sc_bslot[avp->av_bslot] != ATH_IF_ID_ANY);
+			sc->sc_bslot[avp->av_bslot] = if_id;
+			sc->sc_nbcnvaps++;
+		}
+	}
+
+	/* release the previous beacon frame , if it already exists. */
+	bf = avp->av_bcbuf;
+	if (bf->bf_mpdu != NULL) {
+		skb = (struct sk_buff *)bf->bf_mpdu;
+		ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE,
+				     get_dma_mem_context(bf, bf_dmacontext));
+		dev_kfree_skb_any(skb);
+		bf->bf_mpdu = NULL;
+	}
+
+	/*
+	 * NB: the beacon data buffer must be 32-bit aligned;
+	 * we assume the wbuf routines will return us something
+	 * with this alignment (perhaps should assert).
+	 * FIXME: Fill avp->av_boff.bo_tim,avp->av_btxctl.txpower and
+	 * avp->av_btxctl.shortPreamble
+	 */
+	skb = ieee80211_beacon_get(sc->hw, avp->av_if_data);
+	if (skb == NULL) {
+		DPRINTF(sc, ATH_DBG_BEACON, "%s: cannot get skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Calculate a TSF adjustment factor required for
+	 * staggered beacons.  Note that we assume the format
+	 * of the beacon frame leaves the tstamp field immediately
+	 * following the header.
+	 */
+	if (avp->av_bslot > 0) {
+		u64 tsfadjust;
+		__le64 val;
+		int intval;
+
+		/* FIXME: Use default value for now: Sujith */
+
+		intval = ATH_DEFAULT_BINTVAL;
+
+		/*
+		 * The beacon interval is in TU's; the TSF in usecs.
+		 * We figure out how many TU's to add to align the
+		 * timestamp then convert to TSF units and handle
+		 * byte swapping before writing it in the frame.
+		 * The hardware will then add this each time a beacon
+		 * frame is sent.  Note that we align vap's 1..N
+		 * and leave vap 0 untouched.  This means vap 0
+		 * has a timestamp in one beacon interval while the
+		 * others get a timestamp aligned to the next interval.
+		 */
+		tsfadjust = (intval * (ATH_BCBUF - avp->av_bslot)) / ATH_BCBUF;
+		val = cpu_to_le64(tsfadjust << 10);     /* TU->TSF */
+
+		DPRINTF(sc, ATH_DBG_BEACON,
+			"%s: %s beacons, bslot %d intval %u tsfadjust %llu\n",
+			__func__, "stagger",
+			avp->av_bslot, intval, (unsigned long long)tsfadjust);
+
+		wh = (struct ieee80211_hdr *)skb->data;
+		memcpy(&wh[1], &val, sizeof(val));
+	}
+
+	bf->bf_buf_addr = ath_skb_map_single(sc, skb, PCI_DMA_TODEVICE,
+		get_dma_mem_context(bf, bf_dmacontext));
+	bf->bf_mpdu = skb;
+
+	return 0;
+}
+
+/*
+ *  Reclaim beacon resources and return buffer to the pool.
+ *
+ *  Checks the VAP to put the beacon frame buffer back to the ATH object
+ *  queue, and de-allocates any wbuf frames that were sent as CAB traffic.
+*/
+
+void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
+{
+	if (avp->av_bcbuf != NULL) {
+		struct ath_buf *bf;
+
+		if (avp->av_bslot != -1) {
+			sc->sc_bslot[avp->av_bslot] = ATH_IF_ID_ANY;
+			sc->sc_nbcnvaps--;
+		}
+
+		bf = avp->av_bcbuf;
+		if (bf->bf_mpdu != NULL) {
+			struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+			ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE,
+				get_dma_mem_context(bf, bf_dmacontext));
+			dev_kfree_skb_any(skb);
+			bf->bf_mpdu = NULL;
+		}
+		list_add_tail(&bf->list, &sc->sc_bbuf);
+
+		avp->av_bcbuf = NULL;
+	}
+}
+
+/*
+ *  Reclaim beacon resources and return buffer to the pool.
+ *
+ *  This function will free any wbuf frames that are still attached to the
+ *  beacon buffers in the ATH object.  Note that this does not de-allocate
+ *  any wbuf objects that are in the transmit queue and have not yet returned
+ *  to the ATH object.
+*/
+
+void ath_beacon_free(struct ath_softc *sc)
+{
+	struct ath_buf *bf;
+
+	list_for_each_entry(bf, &sc->sc_bbuf, list) {
+		if (bf->bf_mpdu != NULL) {
+			struct sk_buff *skb = (struct sk_buff *) bf->bf_mpdu;
+			ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE,
+				get_dma_mem_context(bf, bf_dmacontext));
+			dev_kfree_skb_any(skb);
+			bf->bf_mpdu = NULL;
+		}
+	}
+}
+
+/*
+ * Tasklet for Sending Beacons
+ *
+ * Transmit one or more beacon frames at SWBA.  Dynamic updates to the frame
+ * contents are done as needed and the slot time is also adjusted based on
+ * current state.
+ *
+ * This tasklet is not scheduled, it's called in ISR context.
+*/
+
+void ath9k_beacon_tasklet(unsigned long data)
+{
+#define TSF_TO_TU(_h,_l)					\
+	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
+
+	struct ath_softc *sc = (struct ath_softc *)data;
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf = NULL;
+	int slot, if_id;
+	u32 bfaddr;
+	u32 rx_clear = 0, rx_frame = 0, tx_frame = 0;
+	u32 show_cycles = 0;
+	u32 bc = 0; /* beacon count */
+	u64 tsf;
+	u32 tsftu;
+	u16 intval;
+
+	if (sc->sc_noreset) {
+		show_cycles = ath9k_hw_GetMibCycleCountsPct(ah,
+							    &rx_clear,
+							    &rx_frame,
+							    &tx_frame);
+	}
+
+	/*
+	 * Check if the previous beacon has gone out.  If
+	 * not don't try to post another, skip this period
+	 * and wait for the next.  Missed beacons indicate
+	 * a problem and should not occur.  If we miss too
+	 * many consecutive beacons reset the device.
+	 */
+	if (ath9k_hw_numtxpending(ah, sc->sc_bhalq) != 0) {
+		sc->sc_bmisscount++;
+		/* XXX: doth needs the chanchange IE countdown decremented.
+		 *      We should consider adding a mac80211 call to indicate
+		 *      a beacon miss so appropriate action could be taken
+		 *      (in that layer).
+		 */
+		if (sc->sc_bmisscount < BSTUCK_THRESH) {
+			if (sc->sc_noreset) {
+				DPRINTF(sc, ATH_DBG_BEACON,
+					"%s: missed %u consecutive beacons\n",
+					__func__, sc->sc_bmisscount);
+				if (show_cycles) {
+					/*
+					 * Display cycle counter stats
+					 * from HW to aide in debug of
+					 * stickiness.
+					 */
+					DPRINTF(sc,
+						ATH_DBG_BEACON,
+						"%s: busy times: rx_clear=%d, "
+						"rx_frame=%d, tx_frame=%d\n",
+						__func__, rx_clear, rx_frame,
+						tx_frame);
+				} else {
+					DPRINTF(sc,
+						ATH_DBG_BEACON,
+						"%s: unable to obtain "
+						"busy times\n", __func__);
+				}
+			} else {
+				DPRINTF(sc, ATH_DBG_BEACON,
+					"%s: missed %u consecutive beacons\n",
+					__func__, sc->sc_bmisscount);
+			}
+		} else if (sc->sc_bmisscount >= BSTUCK_THRESH) {
+			if (sc->sc_noreset) {
+				if (sc->sc_bmisscount == BSTUCK_THRESH) {
+					DPRINTF(sc,
+						ATH_DBG_BEACON,
+						"%s: beacon is officially "
+						"stuck\n", __func__);
+					ath9k_hw_dmaRegDump(ah);
+				}
+			} else {
+				DPRINTF(sc, ATH_DBG_BEACON,
+					"%s: beacon is officially stuck\n",
+					__func__);
+				ath_bstuck_process(sc);
+			}
+		}
+
+		return;
+	}
+	if (sc->sc_bmisscount != 0) {
+		if (sc->sc_noreset) {
+			DPRINTF(sc,
+				ATH_DBG_BEACON,
+				"%s: resume beacon xmit after %u misses\n",
+				__func__, sc->sc_bmisscount);
+		} else {
+			DPRINTF(sc, ATH_DBG_BEACON,
+				"%s: resume beacon xmit after %u misses\n",
+				__func__, sc->sc_bmisscount);
+		}
+		sc->sc_bmisscount = 0;
+	}
+
+	/*
+	 * Generate beacon frames. we are sending frames
+	 * staggered so calculate the slot for this frame based
+	 * on the tsf to safeguard against missing an swba.
+	 */
+
+	/* FIXME: Use default value for now - Sujith */
+	intval = ATH_DEFAULT_BINTVAL;
+
+	tsf = ath9k_hw_gettsf64(ah);
+	tsftu = TSF_TO_TU(tsf>>32, tsf);
+	slot = ((tsftu % intval) * ATH_BCBUF) / intval;
+	if_id = sc->sc_bslot[(slot + 1) % ATH_BCBUF];
+	DPRINTF(sc, ATH_DBG_BEACON,
+			"%s: slot %d [tsf %llu tsftu %u intval %u] if_id %d\n",
+			__func__, slot, (unsigned long long) tsf, tsftu,
+			intval, if_id);
+	bfaddr = 0;
+	if (if_id != ATH_IF_ID_ANY) {
+		bf = ath_beacon_generate(sc, if_id);
+		if (bf != NULL) {
+			bfaddr = bf->bf_daddr;
+			bc = 1;
+		}
+	}
+	/*
+	 * Handle slot time change when a non-ERP station joins/leaves
+	 * an 11g network.  The 802.11 layer notifies us via callback,
+	 * we mark updateslot, then wait one beacon before effecting
+	 * the change.  This gives associated stations at least one
+	 * beacon interval to note the state change.
+	 *
+	 * NB: The slot time change state machine is clocked according
+	 *     to whether we are bursting or staggering beacons.  We
+	 *     recognize the request to update and record the current
+	 *     slot then don't transition until that slot is reached
+	 *     again.  If we miss a beacon for that slot then we'll be
+	 *     slow to transition but we'll be sure at least one beacon
+	 *     interval has passed.  When bursting slot is always left
+	 *     set to ATH_BCBUF so this check is a noop.
+	 */
+	/* XXX locking */
+	if (sc->sc_updateslot == UPDATE) {
+		sc->sc_updateslot = COMMIT; /* commit next beacon */
+		sc->sc_slotupdate = slot;
+	} else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot)
+		ath_setslottime(sc);        /* commit change to hardware */
+
+	if (bfaddr != 0) {
+		/*
+		 * Stop any current dma and put the new frame(s) on the queue.
+		 * This should never fail since we check above that no frames
+		 * are still pending on the queue.
+		 */
+		if (!ath9k_hw_stoptxdma(ah, sc->sc_bhalq)) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: beacon queue %u did not stop?\n",
+				__func__, sc->sc_bhalq);
+			/* NB: the HAL still stops DMA, so proceed */
+		}
+
+		/* NB: cabq traffic should already be queued and primed */
+		ath9k_hw_puttxbuf(ah, sc->sc_bhalq, bfaddr);
+		ath9k_hw_txstart(ah, sc->sc_bhalq);
+
+		sc->ast_be_xmit += bc;     /* XXX per-vap? */
+	}
+#undef TSF_TO_TU
+}
+
+/*
+ *  Tasklet for Beacon Stuck processing
+ *
+ *  Processing for Beacon Stuck.
+ *  Basically calls the ath_internal_reset function to reset the chip.
+*/
+
+void ath_bstuck_process(struct ath_softc *sc)
+{
+	DPRINTF(sc, ATH_DBG_BEACON,
+		"%s: stuck beacon; resetting (bmiss count %u)\n",
+		__func__, sc->sc_bmisscount);
+	ath_internal_reset(sc);
+}
+
+/*
+ * Configure the beacon and sleep timers.
+ *
+ * When operating as an AP this resets the TSF and sets
+ * up the hardware to notify us when we need to issue beacons.
+ *
+ * When operating in station mode this sets up the beacon
+ * timers according to the timestamp of the last received
+ * beacon and the current TSF, configures PCF and DTIM
+ * handling, programs the sleep registers so the hardware
+ * will wakeup in time to receive beacons, and configures
+ * the beacon miss handling so we'll receive a BMISS
+ * interrupt when we stop seeing beacons from the AP
+ * we've associated with.
+ */
+
+void ath_beacon_config(struct ath_softc *sc, int if_id)
+{
+#define TSF_TO_TU(_h,_l)					\
+	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
+	struct ath_hal *ah = sc->sc_ah;
+	u32 nexttbtt, intval;
+	struct ath_beacon_config conf;
+	enum ath9k_opmode av_opmode;
+
+	if (if_id != ATH_IF_ID_ANY)
+		av_opmode = sc->sc_vaps[if_id]->av_opmode;
+	else
+		av_opmode = sc->sc_opmode;
+
+	memzero(&conf, sizeof(struct ath_beacon_config));
+
+	/* FIXME: Use default values for now - Sujith */
+	/* Query beacon configuration first */
+	/*
+	 * Protocol stack doesn't support dynamic beacon configuration,
+	 * use default configurations.
+	 */
+	conf.beacon_interval = ATH_DEFAULT_BINTVAL;
+	conf.listen_interval = 1;
+	conf.dtim_period = conf.beacon_interval;
+	conf.dtim_count = 1;
+	conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
+
+	/* extract tstamp from last beacon and convert to TU */
+	nexttbtt = TSF_TO_TU(get_unaligned_le32(conf.u.last_tstamp + 4),
+			     get_unaligned_le32(conf.u.last_tstamp));
+	/* XXX conditionalize multi-bss support? */
+	if (sc->sc_opmode == ATH9K_M_HOSTAP) {
+		/*
+		 * For multi-bss ap support beacons are either staggered
+		 * evenly over N slots or burst together.  For the former
+		 * arrange for the SWBA to be delivered for each slot.
+		 * Slots that are not occupied will generate nothing.
+		 */
+		/* NB: the beacon interval is kept internally in TU's */
+		intval = conf.beacon_interval & ATH9K_BEACON_PERIOD;
+		intval /= ATH_BCBUF;    /* for staggered beacons */
+	} else {
+		intval = conf.beacon_interval & ATH9K_BEACON_PERIOD;
+	}
+
+	if (nexttbtt == 0)      /* e.g. for ap mode */
+		nexttbtt = intval;
+	else if (intval)        /* NB: can be 0 for monitor mode */
+		nexttbtt = roundup(nexttbtt, intval);
+	DPRINTF(sc, ATH_DBG_BEACON, "%s: nexttbtt %u intval %u (%u)\n",
+		__func__, nexttbtt, intval, conf.beacon_interval);
+	/* Check for ATH9K_M_HOSTAP and sc_nostabeacons for WDS client */
+	if (sc->sc_opmode == ATH9K_M_STA) {
+		struct ath9k_beacon_state bs;
+		u64 tsf;
+		u32 tsftu;
+		int dtimperiod, dtimcount, sleepduration;
+		int cfpperiod, cfpcount;
+
+		/*
+		 * Setup dtim and cfp parameters according to
+		 * last beacon we received (which may be none).
+		 */
+		dtimperiod = conf.dtim_period;
+		if (dtimperiod <= 0)        /* NB: 0 if not known */
+			dtimperiod = 1;
+		dtimcount = conf.dtim_count;
+		if (dtimcount >= dtimperiod)    /* NB: sanity check */
+			dtimcount = 0;      /* XXX? */
+		cfpperiod = 1;          /* NB: no PCF support yet */
+		cfpcount = 0;
+
+		sleepduration = conf.listen_interval * intval;
+		if (sleepduration <= 0)
+			sleepduration = intval;
+
+#define FUDGE   2
+		/*
+		 * Pull nexttbtt forward to reflect the current
+		 * TSF and calculate dtim+cfp state for the result.
+		 */
+		tsf = ath9k_hw_gettsf64(ah);
+		tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
+		do {
+			nexttbtt += intval;
+			if (--dtimcount < 0) {
+				dtimcount = dtimperiod - 1;
+				if (--cfpcount < 0)
+					cfpcount = cfpperiod - 1;
+			}
+		} while (nexttbtt < tsftu);
+#undef FUDGE
+		memzero(&bs, sizeof(bs));
+		bs.bs_intval = intval;
+		bs.bs_nexttbtt = nexttbtt;
+		bs.bs_dtimperiod = dtimperiod*intval;
+		bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
+		bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
+		bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
+		bs.bs_cfpmaxduration = 0;
+		/*
+		 * Calculate the number of consecutive beacons to miss
+		 * before taking a BMISS interrupt.  The configuration
+		 * is specified in TU so we only need calculate based
+		 * on the beacon interval.  Note that we clamp the
+		 * result to at most 15 beacons.
+		 */
+		if (sleepduration > intval) {
+			bs.bs_bmissthreshold =
+				conf.listen_interval *
+					ATH_DEFAULT_BMISS_LIMIT / 2;
+		} else {
+			bs.bs_bmissthreshold =
+				DIV_ROUND_UP(conf.bmiss_timeout, intval);
+			if (bs.bs_bmissthreshold > 15)
+				bs.bs_bmissthreshold = 15;
+			else if (bs.bs_bmissthreshold <= 0)
+				bs.bs_bmissthreshold = 1;
+		}
+
+		/*
+		 * Calculate sleep duration.  The configuration is
+		 * given in ms.  We insure a multiple of the beacon
+		 * period is used.  Also, if the sleep duration is
+		 * greater than the DTIM period then it makes senses
+		 * to make it a multiple of that.
+		 *
+		 * XXX fixed at 100ms
+		 */
+
+		bs.bs_sleepduration =
+			roundup(IEEE80211_MS_TO_TU(100), sleepduration);
+		if (bs.bs_sleepduration > bs.bs_dtimperiod)
+			bs.bs_sleepduration = bs.bs_dtimperiod;
+
+		DPRINTF(sc, ATH_DBG_BEACON,
+			"%s: tsf %llu "
+			"tsf:tu %u "
+			"intval %u "
+			"nexttbtt %u "
+			"dtim %u "
+			"nextdtim %u "
+			"bmiss %u "
+			"sleep %u "
+			"cfp:period %u "
+			"maxdur %u "
+			"next %u "
+			"timoffset %u\n"
+			, __func__
+			, (unsigned long long)tsf, tsftu
+			, bs.bs_intval
+			, bs.bs_nexttbtt
+			, bs.bs_dtimperiod
+			, bs.bs_nextdtim
+			, bs.bs_bmissthreshold
+			, bs.bs_sleepduration
+			, bs.bs_cfpperiod
+			, bs.bs_cfpmaxduration
+			, bs.bs_cfpnext
+			, bs.bs_timoffset
+			);
+
+		ath9k_hw_set_interrupts(ah, 0);
+		ath9k_hw_set_sta_beacon_timers(ah, &bs);
+		sc->sc_imask |= ATH9K_INT_BMISS;
+		ath9k_hw_set_interrupts(ah, sc->sc_imask);
+	} else {
+		u64 tsf;
+		u32 tsftu;
+		ath9k_hw_set_interrupts(ah, 0);
+		if (nexttbtt == intval)
+			intval |= ATH9K_BEACON_RESET_TSF;
+		if (sc->sc_opmode == ATH9K_M_IBSS) {
+			/*
+			 * Pull nexttbtt forward to reflect the current
+			 * TSF .
+			 */
+#define FUDGE   2
+			if (!(intval & ATH9K_BEACON_RESET_TSF)) {
+				tsf = ath9k_hw_gettsf64(ah);
+				tsftu = TSF_TO_TU((u32)(tsf>>32),
+					(u32)tsf) + FUDGE;
+				do {
+					nexttbtt += intval;
+				} while (nexttbtt < tsftu);
+			}
+#undef FUDGE
+			DPRINTF(sc, ATH_DBG_BEACON,
+				"%s: IBSS nexttbtt %u intval %u (%u)\n",
+				__func__, nexttbtt,
+				intval & ~ATH9K_BEACON_RESET_TSF,
+				conf.beacon_interval);
+
+			/*
+			 * In IBSS mode enable the beacon timers but only
+			 * enable SWBA interrupts if we need to manually
+			 * prepare beacon frames.  Otherwise we use a
+			 * self-linked tx descriptor and let the hardware
+			 * deal with things.
+			 */
+			intval |= ATH9K_BEACON_ENA;
+			if (!(ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL))
+				sc->sc_imask |= ATH9K_INT_SWBA;
+			ath_beaconq_config(sc);
+		} else if (sc->sc_opmode == ATH9K_M_HOSTAP) {
+			/*
+			 * In AP mode we enable the beacon timers and
+			 * SWBA interrupts to prepare beacon frames.
+			 */
+			intval |= ATH9K_BEACON_ENA;
+			sc->sc_imask |= ATH9K_INT_SWBA;   /* beacon prepare */
+			ath_beaconq_config(sc);
+		}
+		ath9k_hw_beaconinit(ah, nexttbtt, intval);
+		sc->sc_bmisscount = 0;
+		ath9k_hw_set_interrupts(ah, sc->sc_imask);
+		/*
+		 * When using a self-linked beacon descriptor in
+		 * ibss mode load it once here.
+		 */
+		if (sc->sc_opmode == ATH9K_M_IBSS &&
+		    (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL))
+			ath_beacon_start_adhoc(sc, 0);
+	}
+#undef TSF_TO_TU
+}
+
+/* Function to collect beacon rssi data and resync beacon if necessary */
+
+void ath_beacon_sync(struct ath_softc *sc, int if_id)
+{
+	/*
+	 * Resync beacon timers using the tsf of the
+	 * beacon frame we just received.
+	 */
+	ath_beacon_config(sc, if_id);
+	sc->sc_beacons = 1;
+}
diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c
new file mode 100644
index 00000000000..f6c45288d0e
--- /dev/null
+++ b/drivers/net/wireless/ath9k/core.c
@@ -0,0 +1,1923 @@
+/*
+ * Copyright (c) 2008, Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /* Implementation of the main "ATH" layer. */
+
+#include "core.h"
+#include "regd.h"
+
+static int ath_outdoor;		/* enable outdoor use */
+
+static const u8 ath_bcast_mac[ETH_ALEN] =
+    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+static u32 ath_chainmask_sel_up_rssi_thres =
+	ATH_CHAINMASK_SEL_UP_RSSI_THRES;
+static u32 ath_chainmask_sel_down_rssi_thres =
+	ATH_CHAINMASK_SEL_DOWN_RSSI_THRES;
+static u32 ath_chainmask_sel_period =
+	ATH_CHAINMASK_SEL_TIMEOUT;
+
+/* return bus cachesize in 4B word units */
+
+static void bus_read_cachesize(struct ath_softc *sc, int *csz)
+{
+	u8 u8tmp;
+
+	pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp);
+	*csz = (int)u8tmp;
+
+	/*
+	 * This check was put in to avoid "unplesant" consequences if
+	 * the bootrom has not fully initialized all PCI devices.
+	 * Sometimes the cache line size register is not set
+	 */
+
+	if (*csz == 0)
+		*csz = DEFAULT_CACHELINE >> 2;   /* Use the default size */
+}
+
+/*
+ *  Set current operating mode
+ *
+ *  This function initializes and fills the rate table in the ATH object based
+ *  on the operating mode.  The blink rates are also set up here, although
+ *  they have been superceeded by the ath_led module.
+*/
+
+static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode)
+{
+	const struct ath9k_rate_table *rt;
+	int i;
+
+	memset(sc->sc_rixmap, 0xff, sizeof(sc->sc_rixmap));
+	rt = ath9k_hw_getratetable(sc->sc_ah, mode);
+	BUG_ON(!rt);
+
+	for (i = 0; i < rt->rateCount; i++)
+		sc->sc_rixmap[rt->info[i].rateCode] = (u8) i;
+
+	memzero(sc->sc_hwmap, sizeof(sc->sc_hwmap));
+	for (i = 0; i < 256; i++) {
+		u8 ix = rt->rateCodeToIndex[i];
+
+		if (ix == 0xff)
+			continue;
+
+		sc->sc_hwmap[i].ieeerate =
+		    rt->info[ix].dot11Rate & IEEE80211_RATE_VAL;
+		sc->sc_hwmap[i].rateKbps = rt->info[ix].rateKbps;
+
+		if (rt->info[ix].shortPreamble ||
+		    rt->info[ix].phy == PHY_OFDM) {
+			/* XXX: Handle this */
+		}
+
+		/* NB: this uses the last entry if the rate isn't found */
+		/* XXX beware of overlow */
+	}
+	sc->sc_currates = rt;
+	sc->sc_curmode = mode;
+	/*
+	 * All protection frames are transmited at 2Mb/s for
+	 * 11g, otherwise at 1Mb/s.
+	 * XXX select protection rate index from rate table.
+	 */
+	sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0);
+}
+
+/*
+ * Set up rate table (legacy rates)
+ */
+static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	const struct ath9k_rate_table *rt = NULL;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_rate *rate;
+	int i, maxrates;
+
+	switch (band) {
+	case IEEE80211_BAND_2GHZ:
+		rt = ath9k_hw_getratetable(ah, ATH9K_MODE_11G);
+		break;
+	case IEEE80211_BAND_5GHZ:
+		rt = ath9k_hw_getratetable(ah, ATH9K_MODE_11A);
+		break;
+	default:
+		break;
+	}
+
+	if (rt == NULL)
+		return;
+
+	sband = &sc->sbands[band];
+	rate = sc->rates[band];
+
+	if (rt->rateCount > ATH_RATE_MAX)
+		maxrates = ATH_RATE_MAX;
+	else
+		maxrates = rt->rateCount;
+
+	for (i = 0; i < maxrates; i++) {
+		rate[i].bitrate = rt->info[i].rateKbps / 100;
+		rate[i].hw_value = rt->info[i].rateCode;
+		sband->n_bitrates++;
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"%s: Rate: %2dMbps, ratecode: %2d\n",
+			__func__,
+			rate[i].bitrate / 10,
+			rate[i].hw_value);
+	}
+}
+
+/*
+ *  Set up channel list
+ */
+static int ath_setup_channels(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int nchan, i, a = 0, b = 0;
+	u8 regclassids[ATH_REGCLASSIDS_MAX];
+	u32 nregclass = 0;
+	struct ieee80211_supported_band *band_2ghz;
+	struct ieee80211_supported_band *band_5ghz;
+	struct ieee80211_channel *chan_2ghz;
+	struct ieee80211_channel *chan_5ghz;
+	struct ath9k_channel *c;
+
+	/* Fill in ah->ah_channels */
+	if (!ath9k_regd_init_channels(ah,
+				      ATH_CHAN_MAX,
+				      (u32 *)&nchan,
+				      regclassids,
+				      ATH_REGCLASSIDS_MAX,
+				      &nregclass,
+				      CTRY_DEFAULT,
+				      false,
+				      1)) {
+		u32 rd = ah->ah_currentRD;
+
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to collect channel list; "
+			"regdomain likely %u country code %u\n",
+			__func__, rd, CTRY_DEFAULT);
+		return -EINVAL;
+	}
+
+	band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ];
+	band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ];
+	chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ];
+	chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ];
+
+	for (i = 0; i < nchan; i++) {
+		c = &ah->ah_channels[i];
+		if (IS_CHAN_2GHZ(c)) {
+			chan_2ghz[a].band = IEEE80211_BAND_2GHZ;
+			chan_2ghz[a].center_freq = c->channel;
+			chan_2ghz[a].max_power = c->maxTxPower;
+
+			if (c->privFlags & CHANNEL_DISALLOW_ADHOC)
+				chan_2ghz[a].flags |=
+					IEEE80211_CHAN_NO_IBSS;
+			if (c->channelFlags & CHANNEL_PASSIVE)
+				chan_2ghz[a].flags |=
+					IEEE80211_CHAN_PASSIVE_SCAN;
+
+			band_2ghz->n_channels = ++a;
+
+			DPRINTF(sc, ATH_DBG_CONFIG,
+				"%s: 2MHz channel: %d, "
+				"channelFlags: 0x%x\n",
+				__func__,
+				c->channel,
+				c->channelFlags);
+		} else if (IS_CHAN_5GHZ(c)) {
+			chan_5ghz[b].band = IEEE80211_BAND_5GHZ;
+			chan_5ghz[b].center_freq = c->channel;
+			chan_5ghz[b].max_power = c->maxTxPower;
+
+			if (c->privFlags & CHANNEL_DISALLOW_ADHOC)
+				chan_5ghz[b].flags |=
+					IEEE80211_CHAN_NO_IBSS;
+			if (c->channelFlags & CHANNEL_PASSIVE)
+				chan_5ghz[b].flags |=
+					IEEE80211_CHAN_PASSIVE_SCAN;
+
+			band_5ghz->n_channels = ++b;
+
+			DPRINTF(sc, ATH_DBG_CONFIG,
+				"%s: 5MHz channel: %d, "
+				"channelFlags: 0x%x\n",
+				__func__,
+				c->channel,
+				c->channelFlags);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ *  Determine mode from channel flags
+ *
+ *  This routine will provide the enumerated WIRELESSS_MODE value based
+ *  on the settings of the channel flags.  If ho valid set of flags
+ *  exist, the lowest mode (11b) is selected.
+*/
+
+static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan)
+{
+	if (chan->chanmode == CHANNEL_A)
+		return ATH9K_MODE_11A;
+	else if (chan->chanmode == CHANNEL_G)
+		return ATH9K_MODE_11G;
+	else if (chan->chanmode == CHANNEL_B)
+		return ATH9K_MODE_11B;
+	else if (chan->chanmode == CHANNEL_A_HT20)
+		return ATH9K_MODE_11NA_HT20;
+	else if (chan->chanmode == CHANNEL_G_HT20)
+		return ATH9K_MODE_11NG_HT20;
+	else if (chan->chanmode == CHANNEL_A_HT40PLUS)
+		return ATH9K_MODE_11NA_HT40PLUS;
+	else if (chan->chanmode == CHANNEL_A_HT40MINUS)
+		return ATH9K_MODE_11NA_HT40MINUS;
+	else if (chan->chanmode == CHANNEL_G_HT40PLUS)
+		return ATH9K_MODE_11NG_HT40PLUS;
+	else if (chan->chanmode == CHANNEL_G_HT40MINUS)
+		return ATH9K_MODE_11NG_HT40MINUS;
+
+	/* NB: should not get here */
+	return ATH9K_MODE_11B;
+}
+
+/*
+ * Stop the device, grabbing the top-level lock to protect
+ * against concurrent entry through ath_init (which can happen
+ * if another thread does a system call and the thread doing the
+ * stop is preempted).
+ */
+
+static int ath_stop(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: invalid %u\n",
+		__func__, sc->sc_invalid);
+
+	/*
+	 * Shutdown the hardware and driver:
+	 *    stop output from above
+	 *    reset 802.11 state machine
+	 *      (sends station deassoc/deauth frames)
+	 *    turn off timers
+	 *    disable interrupts
+	 *    clear transmit machinery
+	 *    clear receive machinery
+	 *    turn off the radio
+	 *    reclaim beacon resources
+	 *
+	 * Note that some of this work is not possible if the
+	 * hardware is gone (invalid).
+	 */
+
+	if (!sc->sc_invalid)
+		ath9k_hw_set_interrupts(ah, 0);
+	ath_draintxq(sc, false);
+	if (!sc->sc_invalid) {
+		ath_stoprecv(sc);
+		ath9k_hw_phy_disable(ah);
+	} else
+		sc->sc_rxlink = NULL;
+
+	return 0;
+}
+
+/*
+ *  Start Scan
+ *
+ *  This function is called when starting a channel scan.  It will perform
+ *  power save wakeup processing, set the filter for the scan, and get the
+ *  chip ready to send broadcast packets out during the scan.
+*/
+
+void ath_scan_start(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	u32 rfilt;
+	u32 now = (u32) jiffies_to_msecs(get_timestamp());
+
+	sc->sc_scanning = 1;
+	rfilt = ath_calcrxfilter(sc);
+	ath9k_hw_setrxfilter(ah, rfilt);
+	ath9k_hw_write_associd(ah, ath_bcast_mac, 0);
+
+	/* Restore previous power management state. */
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%d.%03d | %s: RX filter 0x%x aid 0\n",
+		now / 1000, now % 1000, __func__, rfilt);
+}
+
+/*
+ *  Scan End
+ *
+ *  This routine is called by the upper layer when the scan is completed.  This
+ *  will set the filters back to normal operating mode, set the BSSID to the
+ *  correct value, and restore the power save state.
+*/
+
+void ath_scan_end(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	u32 rfilt;
+	u32 now = (u32) jiffies_to_msecs(get_timestamp());
+
+	sc->sc_scanning = 0;
+	/* Request for a full reset due to rx packet filter changes */
+	sc->sc_full_reset = 1;
+	rfilt = ath_calcrxfilter(sc);
+	ath9k_hw_setrxfilter(ah, rfilt);
+	ath9k_hw_write_associd(ah, sc->sc_curbssid, sc->sc_curaid);
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%d.%03d | %s: RX filter 0x%x aid 0x%x\n",
+		now / 1000, now % 1000, __func__, rfilt, sc->sc_curaid);
+}
+
+/*
+ * Set the current channel
+ *
+ * Set/change channels.  If the channel is really being changed, it's done
+ * by reseting the chip.  To accomplish this we must first cleanup any pending
+ * DMA, then restart stuff after a la ath_init.
+*/
+int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	bool fastcc = true, stopped;
+	enum ath9k_ht_macmode ht_macmode;
+
+	if (sc->sc_invalid)	/* if the device is invalid or removed */
+		return -EIO;
+
+	DPRINTF(sc, ATH_DBG_CONFIG,
+		"%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n",
+		__func__,
+		ath9k_hw_mhz2ieee(ah, sc->sc_curchan.channel,
+				  sc->sc_curchan.channelFlags),
+		sc->sc_curchan.channel,
+		ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags),
+		hchan->channel, hchan->channelFlags);
+
+	ht_macmode = ath_cwm_macmode(sc);
+
+	if (hchan->channel != sc->sc_curchan.channel ||
+	    hchan->channelFlags != sc->sc_curchan.channelFlags ||
+	    sc->sc_update_chainmask || sc->sc_full_reset) {
+		int status;
+		/*
+		 * This is only performed if the channel settings have
+		 * actually changed.
+		 *
+		 * To switch channels clear any pending DMA operations;
+		 * wait long enough for the RX fifo to drain, reset the
+		 * hardware at the new frequency, and then re-enable
+		 * the relevant bits of the h/w.
+		 */
+		ath9k_hw_set_interrupts(ah, 0);	/* disable interrupts */
+		ath_draintxq(sc, false);	/* clear pending tx frames */
+		stopped = ath_stoprecv(sc);	/* turn off frame recv */
+
+		/* XXX: do not flush receive queue here. We don't want
+		 * to flush data frames already in queue because of
+		 * changing channel. */
+
+		if (!stopped || sc->sc_full_reset)
+			fastcc = false;
+
+		spin_lock_bh(&sc->sc_resetlock);
+		if (!ath9k_hw_reset(ah, sc->sc_opmode, hchan,
+					ht_macmode, sc->sc_tx_chainmask,
+					sc->sc_rx_chainmask,
+					sc->sc_ht_extprotspacing,
+					fastcc, &status)) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: unable to reset channel %u (%uMhz) "
+				"flags 0x%x hal status %u\n", __func__,
+				ath9k_hw_mhz2ieee(ah, hchan->channel,
+						  hchan->channelFlags),
+				hchan->channel, hchan->channelFlags, status);
+			spin_unlock_bh(&sc->sc_resetlock);
+			return -EIO;
+		}
+		spin_unlock_bh(&sc->sc_resetlock);
+
+		sc->sc_curchan = *hchan;
+		sc->sc_update_chainmask = 0;
+		sc->sc_full_reset = 0;
+
+		/* Re-enable rx framework */
+		if (ath_startrecv(sc) != 0) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: unable to restart recv logic\n", __func__);
+			return -EIO;
+		}
+		/*
+		 * Change channels and update the h/w rate map
+		 * if we're switching; e.g. 11a to 11b/g.
+		 */
+		ath_setcurmode(sc, ath_chan2mode(hchan));
+
+		ath_update_txpow(sc);	/* update tx power state */
+		/*
+		 * Re-enable interrupts.
+		 */
+		ath9k_hw_set_interrupts(ah, sc->sc_imask);
+	}
+	return 0;
+}
+
+/**********************/
+/* Chainmask Handling */
+/**********************/
+
+static void ath_chainmask_sel_timertimeout(unsigned long data)
+{
+	struct ath_chainmask_sel *cm = (struct ath_chainmask_sel *)data;
+	cm->switch_allowed = 1;
+}
+
+/* Start chainmask select timer */
+static void ath_chainmask_sel_timerstart(struct ath_chainmask_sel *cm)
+{
+	cm->switch_allowed = 0;
+	mod_timer(&cm->timer, ath_chainmask_sel_period);
+}
+
+/* Stop chainmask select timer */
+static void ath_chainmask_sel_timerstop(struct ath_chainmask_sel *cm)
+{
+	cm->switch_allowed = 0;
+	del_timer_sync(&cm->timer);
+}
+
+static void ath_chainmask_sel_init(struct ath_softc *sc, struct ath_node *an)
+{
+	struct ath_chainmask_sel *cm = &an->an_chainmask_sel;
+
+	memzero(cm, sizeof(struct ath_chainmask_sel));
+
+	cm->cur_tx_mask = sc->sc_tx_chainmask;
+	cm->cur_rx_mask = sc->sc_rx_chainmask;
+	cm->tx_avgrssi = ATH_RSSI_DUMMY_MARKER;
+	setup_timer(&cm->timer,
+		ath_chainmask_sel_timertimeout, (unsigned long) cm);
+}
+
+int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an)
+{
+	struct ath_chainmask_sel *cm = &an->an_chainmask_sel;
+
+	/*
+	 * Disable auto-swtiching in one of the following if conditions.
+	 * sc_chainmask_auto_sel is used for internal global auto-switching
+	 * enabled/disabled setting
+	 */
+	if (sc->sc_ah->ah_caps.tx_chainmask != ATH_CHAINMASK_SEL_3X3) {
+		cm->cur_tx_mask = sc->sc_tx_chainmask;
+		return cm->cur_tx_mask;
+	}
+
+	if (cm->tx_avgrssi == ATH_RSSI_DUMMY_MARKER)
+		return cm->cur_tx_mask;
+
+	if (cm->switch_allowed) {
+		/* Switch down from tx 3 to tx 2. */
+		if (cm->cur_tx_mask == ATH_CHAINMASK_SEL_3X3 &&
+		    ATH_RSSI_OUT(cm->tx_avgrssi) >=
+		    ath_chainmask_sel_down_rssi_thres) {
+			cm->cur_tx_mask = sc->sc_tx_chainmask;
+
+			/* Don't let another switch happen until
+			 * this timer expires */
+			ath_chainmask_sel_timerstart(cm);
+		}
+		/* Switch up from tx 2 to 3. */
+		else if (cm->cur_tx_mask == sc->sc_tx_chainmask &&
+			 ATH_RSSI_OUT(cm->tx_avgrssi) <=
+			 ath_chainmask_sel_up_rssi_thres) {
+			cm->cur_tx_mask = ATH_CHAINMASK_SEL_3X3;
+
+			/* Don't let another switch happen
+			 * until this timer expires */
+			ath_chainmask_sel_timerstart(cm);
+		}
+	}
+
+	return cm->cur_tx_mask;
+}
+
+/*
+ * Update tx/rx chainmask. For legacy association,
+ * hard code chainmask to 1x1, for 11n association, use
+ * the chainmask configuration.
+ */
+
+void ath_update_chainmask(struct ath_softc *sc, int is_ht)
+{
+	sc->sc_update_chainmask = 1;
+	if (is_ht) {
+		sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask;
+		sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask;
+	} else {
+		sc->sc_tx_chainmask = 1;
+		sc->sc_rx_chainmask = 1;
+	}
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: tx chmask: %d, rx chmask: %d\n",
+		__func__, sc->sc_tx_chainmask, sc->sc_rx_chainmask);
+}
+
+/******************/
+/* VAP management */
+/******************/
+
+/*
+ *  VAP in Listen mode
+ *
+ *  This routine brings the VAP out of the down state into a "listen" state
+ *  where it waits for association requests.  This is used in AP and AdHoc
+ *  modes.
+*/
+
+int ath_vap_listen(struct ath_softc *sc, int if_id)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_vap *avp;
+	u32 rfilt = 0;
+	DECLARE_MAC_BUF(mac);
+
+	avp = sc->sc_vaps[if_id];
+	if (avp == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: invalid interface id %u\n",
+			__func__, if_id);
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_SLOW_ANT_DIV
+	ath_slow_ant_div_stop(&sc->sc_antdiv);
+#endif
+
+	/* update ratectrl about the new state */
+	ath_rate_newstate(sc, avp);
+
+	rfilt = ath_calcrxfilter(sc);
+	ath9k_hw_setrxfilter(ah, rfilt);
+
+	if (sc->sc_opmode == ATH9K_M_STA || sc->sc_opmode == ATH9K_M_IBSS) {
+		memcpy(sc->sc_curbssid, ath_bcast_mac, ETH_ALEN);
+		ath9k_hw_write_associd(ah, sc->sc_curbssid, sc->sc_curaid);
+	} else
+		sc->sc_curaid = 0;
+
+	DPRINTF(sc, ATH_DBG_CONFIG,
+		"%s: RX filter 0x%x bssid %s aid 0x%x\n",
+		__func__, rfilt, print_mac(mac,
+			sc->sc_curbssid), sc->sc_curaid);
+
+	/*
+	 * XXXX
+	 * Disable BMISS interrupt when we're not associated
+	 */
+	ath9k_hw_set_interrupts(ah,
+		sc->sc_imask & ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS));
+	sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
+	/* need to reconfigure the beacons when it moves to RUN */
+	sc->sc_beacons = 0;
+
+	return 0;
+}
+
+int ath_vap_attach(struct ath_softc *sc,
+		   int if_id,
+		   struct ieee80211_vif *if_data,
+		   enum ath9k_opmode opmode)
+{
+	struct ath_vap *avp;
+
+	if (if_id >= ATH_BCBUF || sc->sc_vaps[if_id] != NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Invalid interface id = %u\n", __func__, if_id);
+		return -EINVAL;
+	}
+
+	switch (opmode) {
+	case ATH9K_M_STA:
+	case ATH9K_M_IBSS:
+	case ATH9K_M_MONITOR:
+		break;
+	case ATH9K_M_HOSTAP:
+		/* XXX not right, beacon buffer is allocated on RUN trans */
+		if (list_empty(&sc->sc_bbuf))
+			return -ENOMEM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* create ath_vap */
+	avp = kmalloc(sizeof(struct ath_vap), GFP_KERNEL);
+	if (avp == NULL)
+		return -ENOMEM;
+
+	memzero(avp, sizeof(struct ath_vap));
+	avp->av_if_data = if_data;
+	/* Set the VAP opmode */
+	avp->av_opmode = opmode;
+	avp->av_bslot = -1;
+	INIT_LIST_HEAD(&avp->av_mcastq.axq_q);
+	INIT_LIST_HEAD(&avp->av_mcastq.axq_acq);
+	spin_lock_init(&avp->av_mcastq.axq_lock);
+
+	ath9k_hw_set_tsfadjust(sc->sc_ah, 1);
+
+	sc->sc_vaps[if_id] = avp;
+	sc->sc_nvaps++;
+	/* Set the device opmode */
+	sc->sc_opmode = opmode;
+
+	/* default VAP configuration */
+	avp->av_config.av_fixed_rateset = IEEE80211_FIXED_RATE_NONE;
+	avp->av_config.av_fixed_retryset = 0x03030303;
+
+	return 0;
+}
+
+int ath_vap_detach(struct ath_softc *sc, int if_id)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_vap *avp;
+
+	avp = sc->sc_vaps[if_id];
+	if (avp == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: invalid interface id %u\n",
+			__func__, if_id);
+		return -EINVAL;
+	}
+
+	/*
+	 * Quiesce the hardware while we remove the vap.  In
+	 * particular we need to reclaim all references to the
+	 * vap state by any frames pending on the tx queues.
+	 *
+	 * XXX can we do this w/o affecting other vap's?
+	 */
+	ath9k_hw_set_interrupts(ah, 0);	/* disable interrupts */
+	ath_draintxq(sc, false);	/* stop xmit side */
+	ath_stoprecv(sc);	/* stop recv side */
+	ath_flushrecv(sc);	/* flush recv queue */
+
+	/* Reclaim any pending mcast bufs on the vap. */
+	ath_tx_draintxq(sc, &avp->av_mcastq, false);
+
+	kfree(avp);
+	sc->sc_vaps[if_id] = NULL;
+	sc->sc_nvaps--;
+
+	return 0;
+}
+
+int ath_vap_config(struct ath_softc *sc,
+	int if_id, struct ath_vap_config *if_config)
+{
+	struct ath_vap *avp;
+
+	if (if_id >= ATH_BCBUF) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Invalid interface id = %u\n", __func__, if_id);
+		return -EINVAL;
+	}
+
+	avp = sc->sc_vaps[if_id];
+	ASSERT(avp != NULL);
+
+	if (avp)
+		memcpy(&avp->av_config, if_config, sizeof(avp->av_config));
+
+	return 0;
+}
+
+/********/
+/* Core */
+/********/
+
+int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int status;
+	int error = 0;
+	enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc);
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: mode %d\n", __func__, sc->sc_opmode);
+
+	/*
+	 * Stop anything previously setup.  This is safe
+	 * whether this is the first time through or not.
+	 */
+	ath_stop(sc);
+
+	/* Initialize chanmask selection */
+	sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask;
+	sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask;
+
+	/* Reset SERDES registers */
+	ath9k_hw_configpcipowersave(ah, 0);
+
+	/*
+	 * The basic interface to setting the hardware in a good
+	 * state is ``reset''.  On return the hardware is known to
+	 * be powered up and with interrupts disabled.  This must
+	 * be followed by initialization of the appropriate bits
+	 * and then setup of the interrupt mask.
+	 */
+	sc->sc_curchan = *initial_chan;
+
+	spin_lock_bh(&sc->sc_resetlock);
+	if (!ath9k_hw_reset(ah, sc->sc_opmode, &sc->sc_curchan, ht_macmode,
+			   sc->sc_tx_chainmask, sc->sc_rx_chainmask,
+			   sc->sc_ht_extprotspacing, false, &status)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to reset hardware; hal status %u "
+			"(freq %u flags 0x%x)\n", __func__, status,
+			sc->sc_curchan.channel, sc->sc_curchan.channelFlags);
+		error = -EIO;
+		spin_unlock_bh(&sc->sc_resetlock);
+		goto done;
+	}
+	spin_unlock_bh(&sc->sc_resetlock);
+	/*
+	 * This is needed only to setup initial state
+	 * but it's best done after a reset.
+	 */
+	ath_update_txpow(sc);
+
+	/*
+	 * Setup the hardware after reset:
+	 * The receive engine is set going.
+	 * Frame transmit is handled entirely
+	 * in the frame output path; there's nothing to do
+	 * here except setup the interrupt mask.
+	 */
+	if (ath_startrecv(sc) != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to start recv logic\n", __func__);
+		error = -EIO;
+		goto done;
+	}
+	/* Setup our intr mask. */
+	sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX
+		| ATH9K_INT_RXEOL | ATH9K_INT_RXORN
+		| ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
+
+	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT)
+		sc->sc_imask |= ATH9K_INT_GTT;
+
+	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
+		sc->sc_imask |= ATH9K_INT_CST;
+
+	/*
+	 * Enable MIB interrupts when there are hardware phy counters.
+	 * Note we only do this (at the moment) for station mode.
+	 */
+	if (ath9k_hw_phycounters(ah) &&
+	    ((sc->sc_opmode == ATH9K_M_STA) || (sc->sc_opmode == ATH9K_M_IBSS)))
+		sc->sc_imask |= ATH9K_INT_MIB;
+	/*
+	 * Some hardware processes the TIM IE and fires an
+	 * interrupt when the TIM bit is set.  For hardware
+	 * that does, if not overridden by configuration,
+	 * enable the TIM interrupt when operating as station.
+	 */
+	if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
+	    (sc->sc_opmode == ATH9K_M_STA) &&
+	    !sc->sc_config.swBeaconProcess)
+		sc->sc_imask |= ATH9K_INT_TIM;
+	/*
+	 *  Don't enable interrupts here as we've not yet built our
+	 *  vap and node data structures, which will be needed as soon
+	 *  as we start receiving.
+	 */
+	ath_setcurmode(sc, ath_chan2mode(initial_chan));
+
+	/* XXX: we must make sure h/w is ready and clear invalid flag
+	 * before turning on interrupt. */
+	sc->sc_invalid = 0;
+done:
+	return error;
+}
+
+/*
+ * Reset the hardware w/o losing operational state.  This is
+ * basically a more efficient way of doing ath_stop, ath_init,
+ * followed by state transitions to the current 802.11
+ * operational state.  Used to recover from errors rx overrun
+ * and to reset the hardware when rf gain settings must be reset.
+ */
+
+static int ath_reset_start(struct ath_softc *sc, u32 flag)
+{
+	struct ath_hal *ah = sc->sc_ah;
+
+	ath9k_hw_set_interrupts(ah, 0);	/* disable interrupts */
+	ath_draintxq(sc, flag & RESET_RETRY_TXQ);	/* stop xmit side */
+	ath_stoprecv(sc);	/* stop recv side */
+	ath_flushrecv(sc);	/* flush recv queue */
+
+	return 0;
+}
+
+static int ath_reset_end(struct ath_softc *sc, u32 flag)
+{
+	struct ath_hal *ah = sc->sc_ah;
+
+	if (ath_startrecv(sc) != 0)	/* restart recv */
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to start recv logic\n", __func__);
+
+	/*
+	 * We may be doing a reset in response to a request
+	 * that changes the channel so update any state that
+	 * might change as a result.
+	 */
+	ath_setcurmode(sc, ath_chan2mode(&sc->sc_curchan));
+
+	ath_update_txpow(sc);	/* update tx power state */
+
+	if (sc->sc_beacons)
+		ath_beacon_config(sc, ATH_IF_ID_ANY);	/* restart beacons */
+	ath9k_hw_set_interrupts(ah, sc->sc_imask);
+
+	/* Restart the txq */
+	if (flag & RESET_RETRY_TXQ) {
+		int i;
+		for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+			if (ATH_TXQ_SETUP(sc, i)) {
+				spin_lock_bh(&sc->sc_txq[i].axq_lock);
+				ath_txq_schedule(sc, &sc->sc_txq[i]);
+				spin_unlock_bh(&sc->sc_txq[i].axq_lock);
+			}
+		}
+	}
+	return 0;
+}
+
+int ath_reset(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int status;
+	int error = 0;
+	enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc);
+
+	/* NB: indicate channel change so we do a full reset */
+	spin_lock_bh(&sc->sc_resetlock);
+	if (!ath9k_hw_reset(ah, sc->sc_opmode, &sc->sc_curchan,
+			   ht_macmode,
+			   sc->sc_tx_chainmask, sc->sc_rx_chainmask,
+			   sc->sc_ht_extprotspacing, false, &status)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to reset hardware; hal status %u\n",
+			__func__, status);
+		error = -EIO;
+	}
+	spin_unlock_bh(&sc->sc_resetlock);
+
+	return error;
+}
+
+int ath_suspend(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+
+	/* No I/O if device has been surprise removed */
+	if (sc->sc_invalid)
+		return -EIO;
+
+	/* Shut off the interrupt before setting sc->sc_invalid to '1' */
+	ath9k_hw_set_interrupts(ah, 0);
+
+	/* XXX: we must make sure h/w will not generate any interrupt
+	 * before setting the invalid flag. */
+	sc->sc_invalid = 1;
+
+	/* disable HAL and put h/w to sleep */
+	ath9k_hw_disable(sc->sc_ah);
+
+	ath9k_hw_configpcipowersave(sc->sc_ah, 1);
+
+	return 0;
+}
+
+/* Interrupt handler.  Most of the actual processing is deferred.
+ * It's the caller's responsibility to ensure the chip is awake. */
+
+irqreturn_t ath_isr(int irq, void *dev)
+{
+	struct ath_softc *sc = dev;
+	struct ath_hal *ah = sc->sc_ah;
+	enum ath9k_int status;
+	bool sched = false;
+
+	do {
+		if (sc->sc_invalid) {
+			/*
+			 * The hardware is not ready/present, don't
+			 * touch anything. Note this can happen early
+			 * on if the IRQ is shared.
+			 */
+			return IRQ_NONE;
+		}
+		if (!ath9k_hw_intrpend(ah)) {	/* shared irq, not for us */
+			return IRQ_NONE;
+		}
+
+		/*
+		 * Figure out the reason(s) for the interrupt.  Note
+		 * that the hal returns a pseudo-ISR that may include
+		 * bits we haven't explicitly enabled so we mask the
+		 * value to insure we only process bits we requested.
+		 */
+		ath9k_hw_getisr(ah, &status);	/* NB: clears ISR too */
+
+		status &= sc->sc_imask;	/* discard unasked-for bits */
+
+		/*
+		 * If there are no status bits set, then this interrupt was not
+		 * for me (should have been caught above).
+		 */
+
+		if (!status)
+			return IRQ_NONE;
+
+		sc->sc_intrstatus = status;
+
+		if (status & ATH9K_INT_FATAL) {
+			/* need a chip reset */
+			sched = true;
+		} else if (status & ATH9K_INT_RXORN) {
+			/* need a chip reset */
+			sched = true;
+		} else {
+			if (status & ATH9K_INT_SWBA) {
+				/* schedule a tasklet for beacon handling */
+				tasklet_schedule(&sc->bcon_tasklet);
+			}
+			if (status & ATH9K_INT_RXEOL) {
+				/*
+				 * NB: the hardware should re-read the link when
+				 *     RXE bit is written, but it doesn't work
+				 *     at least on older hardware revs.
+				 */
+				sched = true;
+			}
+
+			if (status & ATH9K_INT_TXURN)
+				/* bump tx trigger level */
+				ath9k_hw_updatetxtriglevel(ah, true);
+			/* XXX: optimize this */
+			if (status & ATH9K_INT_RX)
+				sched = true;
+			if (status & ATH9K_INT_TX)
+				sched = true;
+			if (status & ATH9K_INT_BMISS)
+				sched = true;
+			/* carrier sense timeout */
+			if (status & ATH9K_INT_CST)
+				sched = true;
+			if (status & ATH9K_INT_MIB) {
+				/*
+				 * Disable interrupts until we service the MIB
+				 * interrupt; otherwise it will continue to
+				 * fire.
+				 */
+				ath9k_hw_set_interrupts(ah, 0);
+				/*
+				 * Let the hal handle the event. We assume
+				 * it will clear whatever condition caused
+				 * the interrupt.
+				 */
+				ath9k_hw_procmibevent(ah, &sc->sc_halstats);
+				ath9k_hw_set_interrupts(ah, sc->sc_imask);
+			}
+			if (status & ATH9K_INT_TIM_TIMER) {
+				if (!(ah->ah_caps.hw_caps &
+				      ATH9K_HW_CAP_AUTOSLEEP)) {
+					/* Clear RxAbort bit so that we can
+					 * receive frames */
+					ath9k_hw_setrxabort(ah, 0);
+					sched = true;
+				}
+			}
+		}
+	} while (0);
+
+	if (sched) {
+		/* turn off every interrupt except SWBA */
+		ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA));
+		tasklet_schedule(&sc->intr_tq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* Deferred interrupt processing  */
+
+static void ath9k_tasklet(unsigned long data)
+{
+	struct ath_softc *sc = (struct ath_softc *)data;
+	u32 status = sc->sc_intrstatus;
+
+	if (status & ATH9K_INT_FATAL) {
+		/* need a chip reset */
+		ath_internal_reset(sc);
+		return;
+	} else {
+
+		if (status &
+		    (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
+			/* XXX: fill me in */
+			/*
+			if (status & ATH9K_INT_RXORN) {
+			}
+			if (status & ATH9K_INT_RXEOL) {
+			}
+			*/
+			spin_lock_bh(&sc->sc_rxflushlock);
+			ath_rx_tasklet(sc, 0);
+			spin_unlock_bh(&sc->sc_rxflushlock);
+		}
+		/* XXX: optimize this */
+		if (status & ATH9K_INT_TX)
+			ath_tx_tasklet(sc);
+		/* XXX: fill me in */
+		/*
+		if (status & ATH9K_INT_BMISS) {
+		}
+		if (status & (ATH9K_INT_TIM | ATH9K_INT_DTIMSYNC)) {
+			if (status & ATH9K_INT_TIM) {
+			}
+			if (status & ATH9K_INT_DTIMSYNC) {
+			}
+		}
+		*/
+	}
+
+	/* re-enable hardware interrupt */
+	ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
+}
+
+int ath_init(u16 devid, struct ath_softc *sc)
+{
+	struct ath_hal *ah = NULL;
+	int status;
+	int error = 0, i;
+	int csz = 0;
+	u32 rd;
+
+	/* XXX: hardware will not be ready until ath_open() being called */
+	sc->sc_invalid = 1;
+
+	sc->sc_debug = DBG_DEFAULT;
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: devid 0x%x\n", __func__, devid);
+
+	/* Initialize tasklet */
+	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
+	tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
+		     (unsigned long)sc);
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	bus_read_cachesize(sc, &csz);
+	/* XXX assert csz is non-zero */
+	sc->sc_cachelsz = csz << 2;	/* convert to bytes */
+
+	spin_lock_init(&sc->sc_resetlock);
+
+	ah = ath9k_hw_attach(devid, sc, sc->mem, &status);
+	if (ah == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to attach hardware; HAL status %u\n",
+			__func__, status);
+		error = -ENXIO;
+		goto bad;
+	}
+	sc->sc_ah = ah;
+
+	/* Get the chipset-specific aggr limit. */
+	sc->sc_rtsaggrlimit = ah->ah_caps.rts_aggr_limit;
+
+	/* Get the hardware key cache size. */
+	sc->sc_keymax = ah->ah_caps.keycache_size;
+	if (sc->sc_keymax > ATH_KEYMAX) {
+		DPRINTF(sc, ATH_DBG_KEYCACHE,
+			"%s: Warning, using only %u entries in %u key cache\n",
+			__func__, ATH_KEYMAX, sc->sc_keymax);
+		sc->sc_keymax = ATH_KEYMAX;
+	}
+
+	/*
+	 * Reset the key cache since some parts do not
+	 * reset the contents on initial power up.
+	 */
+	for (i = 0; i < sc->sc_keymax; i++)
+		ath9k_hw_keyreset(ah, (u16) i);
+	/*
+	 * Mark key cache slots associated with global keys
+	 * as in use.  If we knew TKIP was not to be used we
+	 * could leave the +32, +64, and +32+64 slots free.
+	 * XXX only for splitmic.
+	 */
+	for (i = 0; i < IEEE80211_WEP_NKID; i++) {
+		set_bit(i, sc->sc_keymap);
+		set_bit(i + 32, sc->sc_keymap);
+		set_bit(i + 64, sc->sc_keymap);
+		set_bit(i + 32 + 64, sc->sc_keymap);
+	}
+	/*
+	 * Collect the channel list using the default country
+	 * code and including outdoor channels.  The 802.11 layer
+	 * is resposible for filtering this list based on settings
+	 * like the phy mode.
+	 */
+	rd = ah->ah_currentRD;
+
+	error = ath_setup_channels(sc);
+	if (error)
+		goto bad;
+
+	/* default to STA mode */
+	sc->sc_opmode = ATH9K_M_MONITOR;
+
+	/* Setup rate tables */
+
+	ath_setup_rates(sc, IEEE80211_BAND_2GHZ);
+	ath_setup_rates(sc, IEEE80211_BAND_5GHZ);
+
+	/* NB: setup here so ath_rate_update is happy */
+	ath_setcurmode(sc, ATH9K_MODE_11A);
+
+	/*
+	 * Allocate hardware transmit queues: one queue for
+	 * beacon frames and one data queue for each QoS
+	 * priority.  Note that the hal handles reseting
+	 * these queues at the needed time.
+	 */
+	sc->sc_bhalq = ath_beaconq_setup(ah);
+	if (sc->sc_bhalq == -1) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup a beacon xmit queue\n", __func__);
+		error = -EIO;
+		goto bad2;
+	}
+	sc->sc_cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
+	if (sc->sc_cabq == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup CAB xmit queue\n", __func__);
+		error = -EIO;
+		goto bad2;
+	}
+
+	sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME;
+	ath_cabq_update(sc);
+
+	for (i = 0; i < ARRAY_SIZE(sc->sc_haltype2q); i++)
+		sc->sc_haltype2q[i] = -1;
+
+	/* Setup data queues */
+	/* NB: ensure BK queue is the lowest priority h/w queue */
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup xmit queue for BK traffic\n",
+			__func__);
+		error = -EIO;
+		goto bad2;
+	}
+
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup xmit queue for BE traffic\n",
+			__func__);
+		error = -EIO;
+		goto bad2;
+	}
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup xmit queue for VI traffic\n",
+			__func__);
+		error = -EIO;
+		goto bad2;
+	}
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to setup xmit queue for VO traffic\n",
+			__func__);
+		error = -EIO;
+		goto bad2;
+	}
+
+	sc->sc_rc = ath_rate_attach(ah);
+	if (sc->sc_rc == NULL) {
+		error = EIO;
+		goto bad2;
+	}
+
+	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				   ATH9K_CIPHER_TKIP, NULL)) {
+		/*
+		 * Whether we should enable h/w TKIP MIC.
+		 * XXX: if we don't support WME TKIP MIC, then we wouldn't
+		 * report WMM capable, so it's always safe to turn on
+		 * TKIP MIC in this case.
+		 */
+		ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
+				       0, 1, NULL);
+	}
+
+	/*
+	 * Check whether the separate key cache entries
+	 * are required to handle both tx+rx MIC keys.
+	 * With split mic keys the number of stations is limited
+	 * to 27 otherwise 59.
+	 */
+	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				   ATH9K_CIPHER_TKIP, NULL)
+	    && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				      ATH9K_CIPHER_MIC, NULL)
+	    && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
+				      0, NULL))
+		sc->sc_splitmic = 1;
+
+	/* turn on mcast key search if possible */
+	if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
+		(void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
+					     1, NULL);
+
+	sc->sc_config.txpowlimit = ATH_TXPOWER_MAX;
+	sc->sc_config.txpowlimit_override = 0;
+
+	/* 11n Capabilities */
+	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
+		sc->sc_txaggr = 1;
+		sc->sc_rxaggr = 1;
+	}
+
+	sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask;
+	sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask;
+
+	/* Configuration for rx chain detection */
+	sc->sc_rxchaindetect_ref = 0;
+	sc->sc_rxchaindetect_thresh5GHz = 35;
+	sc->sc_rxchaindetect_thresh2GHz = 35;
+	sc->sc_rxchaindetect_delta5GHz = 30;
+	sc->sc_rxchaindetect_delta2GHz = 30;
+
+	ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
+	sc->sc_defant = ath9k_hw_getdefantenna(ah);
+
+	ath9k_hw_getmac(ah, sc->sc_myaddr);
+	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) {
+		ath9k_hw_getbssidmask(ah, sc->sc_bssidmask);
+		ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask);
+		ath9k_hw_setbssidmask(ah, sc->sc_bssidmask);
+	}
+	sc->sc_slottime = ATH9K_SLOT_TIME_9;	/* default to short slot time */
+
+	/* initialize beacon slots */
+	for (i = 0; i < ARRAY_SIZE(sc->sc_bslot); i++)
+		sc->sc_bslot[i] = ATH_IF_ID_ANY;
+
+	/* save MISC configurations */
+	sc->sc_config.swBeaconProcess = 1;
+
+#ifdef CONFIG_SLOW_ANT_DIV
+	/* range is 40 - 255, we use something in the middle */
+	ath_slow_ant_div_init(&sc->sc_antdiv, sc, 0x127);
+#endif
+
+	return 0;
+bad2:
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->sc_txq[i]);
+bad:
+	if (ah)
+		ath9k_hw_detach(ah);
+	return error;
+}
+
+void ath_deinit(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int i;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s\n", __func__);
+
+	ath_stop(sc);
+	if (!sc->sc_invalid)
+		ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
+	ath_rate_detach(sc->sc_rc);
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->sc_txq[i]);
+	ath9k_hw_detach(ah);
+}
+
+/*******************/
+/* Node Management */
+/*******************/
+
+struct ath_node *ath_node_attach(struct ath_softc *sc, u8 *addr, int if_id)
+{
+	struct ath_vap *avp;
+	struct ath_node *an;
+	DECLARE_MAC_BUF(mac);
+
+	avp = sc->sc_vaps[if_id];
+	ASSERT(avp != NULL);
+
+	/* mac80211 sta_notify callback is from an IRQ context, so no sleep */
+	an = kmalloc(sizeof(struct ath_node), GFP_ATOMIC);
+	if (an == NULL)
+		return NULL;
+	memzero(an, sizeof(*an));
+
+	an->an_sc = sc;
+	memcpy(an->an_addr, addr, ETH_ALEN);
+	atomic_set(&an->an_refcnt, 1);
+
+	/* set up per-node tx/rx state */
+	ath_tx_node_init(sc, an);
+	ath_rx_node_init(sc, an);
+
+	ath_chainmask_sel_init(sc, an);
+	ath_chainmask_sel_timerstart(&an->an_chainmask_sel);
+	list_add(&an->list, &sc->node_list);
+
+	return an;
+}
+
+void ath_node_detach(struct ath_softc *sc, struct ath_node *an, bool bh_flag)
+{
+	unsigned long flags;
+
+	DECLARE_MAC_BUF(mac);
+
+	ath_chainmask_sel_timerstop(&an->an_chainmask_sel);
+	an->an_flags |= ATH_NODE_CLEAN;
+	ath_tx_node_cleanup(sc, an, bh_flag);
+	ath_rx_node_cleanup(sc, an);
+
+	ath_tx_node_free(sc, an);
+	ath_rx_node_free(sc, an);
+
+	spin_lock_irqsave(&sc->node_lock, flags);
+
+	list_del(&an->list);
+
+	spin_unlock_irqrestore(&sc->node_lock, flags);
+
+	kfree(an);
+}
+
+/* Finds a node and increases the refcnt if found */
+
+struct ath_node *ath_node_get(struct ath_softc *sc, u8 *addr)
+{
+	struct ath_node *an = NULL, *an_found = NULL;
+
+	if (list_empty(&sc->node_list)) /* FIXME */
+		goto out;
+	list_for_each_entry(an, &sc->node_list, list) {
+		if (!compare_ether_addr(an->an_addr, addr)) {
+			atomic_inc(&an->an_refcnt);
+			an_found = an;
+			break;
+		}
+	}
+out:
+	return an_found;
+}
+
+/* Decrements the refcnt and if it drops to zero, detach the node */
+
+void ath_node_put(struct ath_softc *sc, struct ath_node *an, bool bh_flag)
+{
+	if (atomic_dec_and_test(&an->an_refcnt))
+		ath_node_detach(sc, an, bh_flag);
+}
+
+/* Finds a node, doesn't increment refcnt. Caller must hold sc->node_lock */
+struct ath_node *ath_node_find(struct ath_softc *sc, u8 *addr)
+{
+	struct ath_node *an = NULL, *an_found = NULL;
+
+	if (list_empty(&sc->node_list))
+		return NULL;
+
+	list_for_each_entry(an, &sc->node_list, list)
+		if (!compare_ether_addr(an->an_addr, addr)) {
+			an_found = an;
+			break;
+		}
+
+	return an_found;
+}
+
+/*
+ * Set up New Node
+ *
+ * Setup driver-specific state for a newly associated node.  This routine
+ * really only applies if compression or XR are enabled, there is no code
+ * covering any other cases.
+*/
+
+void ath_newassoc(struct ath_softc *sc,
+	struct ath_node *an, int isnew, int isuapsd)
+{
+	int tidno;
+
+	/* if station reassociates, tear down the aggregation state. */
+	if (!isnew) {
+		for (tidno = 0; tidno < WME_NUM_TID; tidno++) {
+			if (sc->sc_txaggr)
+				ath_tx_aggr_teardown(sc, an, tidno);
+			if (sc->sc_rxaggr)
+				ath_rx_aggr_teardown(sc, an, tidno);
+		}
+	}
+	an->an_flags = 0;
+}
+
+/**************/
+/* Encryption */
+/**************/
+
+void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot)
+{
+	ath9k_hw_keyreset(sc->sc_ah, keyix);
+	if (freeslot)
+		clear_bit(keyix, sc->sc_keymap);
+}
+
+int ath_keyset(struct ath_softc *sc,
+	       u16 keyix,
+	       struct ath9k_keyval *hk,
+	       const u8 mac[ETH_ALEN])
+{
+	bool status;
+
+	status = ath9k_hw_set_keycache_entry(sc->sc_ah,
+		keyix, hk, mac, false);
+
+	return status != false;
+}
+
+/***********************/
+/* TX Power/Regulatory */
+/***********************/
+
+/*
+ *  Set Transmit power in HAL
+ *
+ *  This routine makes the actual HAL calls to set the new transmit power
+ *  limit.
+*/
+
+void ath_update_txpow(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	u32 txpow;
+
+	if (sc->sc_curtxpow != sc->sc_config.txpowlimit) {
+		ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit);
+		/* read back in case value is clamped */
+		ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow);
+		sc->sc_curtxpow = txpow;
+	}
+}
+
+/* Return the current country and domain information */
+void ath_get_currentCountry(struct ath_softc *sc,
+	struct ath9k_country_entry *ctry)
+{
+	ath9k_regd_get_current_country(sc->sc_ah, ctry);
+
+	/* If HAL not specific yet, since it is band dependent,
+	 * use the one we passed in. */
+	if (ctry->countryCode == CTRY_DEFAULT) {
+		ctry->iso[0] = 0;
+		ctry->iso[1] = 0;
+	} else if (ctry->iso[0] && ctry->iso[1]) {
+		if (!ctry->iso[2]) {
+			if (ath_outdoor)
+				ctry->iso[2] = 'O';
+			else
+				ctry->iso[2] = 'I';
+		}
+	}
+}
+
+/**************************/
+/* Slow Antenna Diversity */
+/**************************/
+
+void ath_slow_ant_div_init(struct ath_antdiv *antdiv,
+			   struct ath_softc *sc,
+			   int32_t rssitrig)
+{
+	int trig;
+
+	/* antdivf_rssitrig can range from 40 - 0xff */
+	trig = (rssitrig > 0xff) ? 0xff : rssitrig;
+	trig = (rssitrig < 40) ? 40 : rssitrig;
+
+	antdiv->antdiv_sc = sc;
+	antdiv->antdivf_rssitrig = trig;
+}
+
+void ath_slow_ant_div_start(struct ath_antdiv *antdiv,
+			    u8 num_antcfg,
+			    const u8 *bssid)
+{
+	antdiv->antdiv_num_antcfg =
+		num_antcfg < ATH_ANT_DIV_MAX_CFG ?
+		num_antcfg : ATH_ANT_DIV_MAX_CFG;
+	antdiv->antdiv_state = ATH_ANT_DIV_IDLE;
+	antdiv->antdiv_curcfg = 0;
+	antdiv->antdiv_bestcfg = 0;
+	antdiv->antdiv_laststatetsf = 0;
+
+	memcpy(antdiv->antdiv_bssid, bssid, sizeof(antdiv->antdiv_bssid));
+
+	antdiv->antdiv_start = 1;
+}
+
+void ath_slow_ant_div_stop(struct ath_antdiv *antdiv)
+{
+	antdiv->antdiv_start = 0;
+}
+
+static int32_t ath_find_max_val(int32_t *val,
+	u8 num_val, u8 *max_index)
+{
+	u32 MaxVal = *val++;
+	u32 cur_index = 0;
+
+	*max_index = 0;
+	while (++cur_index < num_val) {
+		if (*val > MaxVal) {
+			MaxVal = *val;
+			*max_index = cur_index;
+		}
+
+		val++;
+	}
+
+	return MaxVal;
+}
+
+void ath_slow_ant_div(struct ath_antdiv *antdiv,
+		      struct ieee80211_hdr *hdr,
+		      struct ath_rx_status *rx_stats)
+{
+	struct ath_softc *sc = antdiv->antdiv_sc;
+	struct ath_hal *ah = sc->sc_ah;
+	u64 curtsf = 0;
+	u8 bestcfg, curcfg = antdiv->antdiv_curcfg;
+	__le16 fc = hdr->frame_control;
+
+	if (antdiv->antdiv_start && ieee80211_is_beacon(fc)
+	    && !compare_ether_addr(hdr->addr3, antdiv->antdiv_bssid)) {
+		antdiv->antdiv_lastbrssi[curcfg] = rx_stats->rs_rssi;
+		antdiv->antdiv_lastbtsf[curcfg] = ath9k_hw_gettsf64(sc->sc_ah);
+		curtsf = antdiv->antdiv_lastbtsf[curcfg];
+	} else {
+		return;
+	}
+
+	switch (antdiv->antdiv_state) {
+	case ATH_ANT_DIV_IDLE:
+		if ((antdiv->antdiv_lastbrssi[curcfg] <
+		     antdiv->antdivf_rssitrig)
+		    && ((curtsf - antdiv->antdiv_laststatetsf) >
+			ATH_ANT_DIV_MIN_IDLE_US)) {
+
+			curcfg++;
+			if (curcfg == antdiv->antdiv_num_antcfg)
+				curcfg = 0;
+
+			if (!ath9k_hw_select_antconfig(ah, curcfg)) {
+				antdiv->antdiv_bestcfg = antdiv->antdiv_curcfg;
+				antdiv->antdiv_curcfg = curcfg;
+				antdiv->antdiv_laststatetsf = curtsf;
+				antdiv->antdiv_state = ATH_ANT_DIV_SCAN;
+			}
+		}
+		break;
+
+	case ATH_ANT_DIV_SCAN:
+		if ((curtsf - antdiv->antdiv_laststatetsf) <
+		    ATH_ANT_DIV_MIN_SCAN_US)
+			break;
+
+		curcfg++;
+		if (curcfg == antdiv->antdiv_num_antcfg)
+			curcfg = 0;
+
+		if (curcfg == antdiv->antdiv_bestcfg) {
+			ath_find_max_val(antdiv->antdiv_lastbrssi,
+				   antdiv->antdiv_num_antcfg, &bestcfg);
+			if (!ath9k_hw_select_antconfig(ah, bestcfg)) {
+				antdiv->antdiv_bestcfg = bestcfg;
+				antdiv->antdiv_curcfg = bestcfg;
+				antdiv->antdiv_laststatetsf = curtsf;
+				antdiv->antdiv_state = ATH_ANT_DIV_IDLE;
+			}
+		} else {
+			if (!ath9k_hw_select_antconfig(ah, curcfg)) {
+				antdiv->antdiv_curcfg = curcfg;
+				antdiv->antdiv_laststatetsf = curtsf;
+				antdiv->antdiv_state = ATH_ANT_DIV_SCAN;
+			}
+		}
+
+		break;
+	}
+}
+
+/***********************/
+/* Descriptor Handling */
+/***********************/
+
+/*
+ *  Set up DMA descriptors
+ *
+ *  This function will allocate both the DMA descriptor structure, and the
+ *  buffers it contains.  These are used to contain the descriptors used
+ *  by the system.
+*/
+
+int ath_descdma_setup(struct ath_softc *sc,
+		      struct ath_descdma *dd,
+		      struct list_head *head,
+		      const char *name,
+		      int nbuf,
+		      int ndesc)
+{
+#define	DS2PHYS(_dd, _ds)						\
+	((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
+#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
+#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
+
+	struct ath_desc *ds;
+	struct ath_buf *bf;
+	int i, bsize, error;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA: %u buffers %u desc/buf\n",
+		__func__, name, nbuf, ndesc);
+
+	/* ath_desc must be a multiple of DWORDs */
+	if ((sizeof(struct ath_desc) % 4) != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: ath_desc not DWORD aligned\n",
+			__func__);
+		ASSERT((sizeof(struct ath_desc) % 4) == 0);
+		error = -ENOMEM;
+		goto fail;
+	}
+
+	dd->dd_name = name;
+	dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
+
+	/*
+	 * Need additional DMA memory because we can't use
+	 * descriptors that cross the 4K page boundary. Assume
+	 * one skipped descriptor per 4K page.
+	 */
+	if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+		u32 ndesc_skipped =
+			ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
+		u32 dma_len;
+
+		while (ndesc_skipped) {
+			dma_len = ndesc_skipped * sizeof(struct ath_desc);
+			dd->dd_desc_len += dma_len;
+
+			ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
+		};
+	}
+
+	/* allocate descriptors */
+	dd->dd_desc = pci_alloc_consistent(sc->pdev,
+			      dd->dd_desc_len,
+			      &dd->dd_desc_paddr);
+	if (dd->dd_desc == NULL) {
+		error = -ENOMEM;
+		goto fail;
+	}
+	ds = dd->dd_desc;
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA map: %p (%u) -> %llx (%u)\n",
+		__func__, dd->dd_name, ds, (u32) dd->dd_desc_len,
+		ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
+
+	/* allocate buffers */
+	bsize = sizeof(struct ath_buf) * nbuf;
+	bf = kmalloc(bsize, GFP_KERNEL);
+	if (bf == NULL) {
+		error = -ENOMEM;
+		goto fail2;
+	}
+	memzero(bf, bsize);
+	dd->dd_bufptr = bf;
+
+	INIT_LIST_HEAD(head);
+	for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
+		bf->bf_desc = ds;
+		bf->bf_daddr = DS2PHYS(dd, ds);
+
+		if (!(sc->sc_ah->ah_caps.hw_caps &
+		      ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+			/*
+			 * Skip descriptor addresses which can cause 4KB
+			 * boundary crossing (addr + length) with a 32 dword
+			 * descriptor fetch.
+			 */
+			while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
+				ASSERT((caddr_t) bf->bf_desc <
+				       ((caddr_t) dd->dd_desc +
+					dd->dd_desc_len));
+
+				ds += ndesc;
+				bf->bf_desc = ds;
+				bf->bf_daddr = DS2PHYS(dd, ds);
+			}
+		}
+		list_add_tail(&bf->list, head);
+	}
+	return 0;
+fail2:
+	pci_free_consistent(sc->pdev,
+		dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr);
+fail:
+	memzero(dd, sizeof(*dd));
+	return error;
+#undef ATH_DESC_4KB_BOUND_CHECK
+#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
+#undef DS2PHYS
+}
+
+/*
+ *  Cleanup DMA descriptors
+ *
+ *  This function will free the DMA block that was allocated for the descriptor
+ *  pool.  Since this was allocated as one "chunk", it is freed in the same
+ *  manner.
+*/
+
+void ath_descdma_cleanup(struct ath_softc *sc,
+			 struct ath_descdma *dd,
+			 struct list_head *head)
+{
+	/* Free memory associated with descriptors */
+	pci_free_consistent(sc->pdev,
+		dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr);
+
+	INIT_LIST_HEAD(head);
+	kfree(dd->dd_bufptr);
+	memzero(dd, sizeof(*dd));
+}
+
+/*************/
+/* Utilities */
+/*************/
+
+void ath_internal_reset(struct ath_softc *sc)
+{
+	ath_reset_start(sc, 0);
+	ath_reset(sc);
+	ath_reset_end(sc, 0);
+}
+
+int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
+{
+	int qnum;
+
+	switch (queue) {
+	case 0:
+		qnum = sc->sc_haltype2q[ATH9K_WME_AC_VO];
+		break;
+	case 1:
+		qnum = sc->sc_haltype2q[ATH9K_WME_AC_VI];
+		break;
+	case 2:
+		qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE];
+		break;
+	case 3:
+		qnum = sc->sc_haltype2q[ATH9K_WME_AC_BK];
+		break;
+	default:
+		qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE];
+		break;
+	}
+
+	return qnum;
+}
+
+int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
+{
+	int qnum;
+
+	switch (queue) {
+	case ATH9K_WME_AC_VO:
+		qnum = 0;
+		break;
+	case ATH9K_WME_AC_VI:
+		qnum = 1;
+		break;
+	case ATH9K_WME_AC_BE:
+		qnum = 2;
+		break;
+	case ATH9K_WME_AC_BK:
+		qnum = 3;
+		break;
+	default:
+		qnum = -1;
+		break;
+	}
+
+	return qnum;
+}
+
+
+/*
+ *  Expand time stamp to TSF
+ *
+ *  Extend 15-bit time stamp from rx descriptor to
+ *  a full 64-bit TSF using the current h/w TSF.
+*/
+
+u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp)
+{
+	u64 tsf;
+
+	tsf = ath9k_hw_gettsf64(sc->sc_ah);
+	if ((tsf & 0x7fff) < rstamp)
+		tsf -= 0x8000;
+	return (tsf & ~0x7fff) | rstamp;
+}
+
+/*
+ *  Set Default Antenna
+ *
+ *  Call into the HAL to set the default antenna to use.  Not really valid for
+ *  MIMO technology.
+*/
+
+void ath_setdefantenna(void *context, u32 antenna)
+{
+	struct ath_softc *sc = (struct ath_softc *)context;
+	struct ath_hal *ah = sc->sc_ah;
+
+	/* XXX block beacon interrupts */
+	ath9k_hw_setantenna(ah, antenna);
+	sc->sc_defant = antenna;
+	sc->sc_rxotherant = 0;
+}
+
+/*
+ * Set Slot Time
+ *
+ * This will wake up the chip if required, and set the slot time for the
+ * frame (maximum transmit time).  Slot time is assumed to be already set
+ * in the ATH object member sc_slottime
+*/
+
+void ath_setslottime(struct ath_softc *sc)
+{
+	ath9k_hw_setslottime(sc->sc_ah, sc->sc_slottime);
+	sc->sc_updateslot = OK;
+}
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
new file mode 100644
index 00000000000..4ee695b76b8
--- /dev/null
+++ b/drivers/net/wireless/ath9k/core.h
@@ -0,0 +1,1073 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef CORE_H
+#define CORE_H
+
+#include <linux/version.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <asm/byteorder.h>
+#include <linux/scatterlist.h>
+#include <asm/page.h>
+#include <net/mac80211.h>
+
+#include "ath9k.h"
+#include "rc.h"
+
+struct ath_node;
+
+/******************/
+/* Utility macros */
+/******************/
+
+/* Macro to expand scalars to 64-bit objects */
+
+#define	ito64(x) (sizeof(x) == 8) ?			\
+	(((unsigned long long int)(x)) & (0xff)) :	\
+	(sizeof(x) == 16) ?				\
+	(((unsigned long long int)(x)) & 0xffff) :	\
+	((sizeof(x) == 32) ?				\
+	 (((unsigned long long int)(x)) & 0xffffffff) : \
+	 (unsigned long long int)(x))
+
+/* increment with wrap-around */
+#define INCR(_l, _sz)   do {			\
+		(_l)++;				\
+		(_l) &= ((_sz) - 1);		\
+	} while (0)
+
+/* decrement with wrap-around */
+#define DECR(_l,  _sz)  do {			\
+		(_l)--;				\
+		(_l) &= ((_sz) - 1);		\
+	} while (0)
+
+#define A_MAX(a, b) ((a) > (b) ? (a) : (b))
+
+#define ASSERT(exp) do {			\
+		if (unlikely(!(exp))) {		\
+			BUG();			\
+		}				\
+	} while (0)
+
+/* XXX: remove */
+#define memzero(_buf, _len) memset(_buf, 0, _len)
+
+#define get_dma_mem_context(var, field) (&((var)->field))
+#define copy_dma_mem_context(dst, src)  (*dst = *src)
+
+#define ATH9K_BH_STATUS_INTACT		0
+#define ATH9K_BH_STATUS_CHANGE		1
+
+#define	ATH_TXQ_SETUP(sc, i)        ((sc)->sc_txqsetup & (1<<i))
+
+static inline unsigned long get_timestamp(void)
+{
+	return ((jiffies / HZ) * 1000) + (jiffies % HZ) * (1000 / HZ);
+}
+
+/*************/
+/* Debugging */
+/*************/
+
+enum ATH_DEBUG {
+	ATH_DBG_RESET		= 0x00000001,
+	ATH_DBG_PHY_IO		= 0x00000002,
+	ATH_DBG_REG_IO		= 0x00000004,
+	ATH_DBG_QUEUE		= 0x00000008,
+	ATH_DBG_EEPROM		= 0x00000010,
+	ATH_DBG_NF_CAL		= 0x00000020,
+	ATH_DBG_CALIBRATE	= 0x00000040,
+	ATH_DBG_CHANNEL		= 0x00000080,
+	ATH_DBG_INTERRUPT	= 0x00000100,
+	ATH_DBG_REGULATORY	= 0x00000200,
+	ATH_DBG_ANI		= 0x00000400,
+	ATH_DBG_POWER_MGMT	= 0x00000800,
+	ATH_DBG_XMIT		= 0x00001000,
+	ATH_DBG_BEACON		= 0x00002000,
+	ATH_DBG_RATE		= 0x00004000,
+	ATH_DBG_CONFIG		= 0x00008000,
+	ATH_DBG_KEYCACHE	= 0x00010000,
+	ATH_DBG_AGGR		= 0x00020000,
+	ATH_DBG_FATAL		= 0x00040000,
+	ATH_DBG_ANY		= 0xffffffff
+};
+
+#define DBG_DEFAULT (ATH_DBG_FATAL)
+
+#define	DPRINTF(sc, _m, _fmt, ...) do {			\
+		if (sc->sc_debug & (_m))                \
+			printk(_fmt , ##__VA_ARGS__);	\
+	} while (0)
+
+/***************************/
+/* Load-time Configuration */
+/***************************/
+
+/* Per-instance load-time (note: NOT run-time) configurations
+ * for Atheros Device */
+struct ath_config {
+	u32 ath_aggr_prot;
+	u16 txpowlimit;
+	u16 txpowlimit_override;
+	u8 cabqReadytime; /* Cabq Readytime % */
+	u8 swBeaconProcess; /* Process received beacons in SW (vs HW) */
+};
+
+/***********************/
+/* Chainmask Selection */
+/***********************/
+
+#define ATH_CHAINMASK_SEL_TIMEOUT	   6000
+/* Default - Number of last RSSI values that is used for
+ * chainmask selection */
+#define ATH_CHAINMASK_SEL_RSSI_CNT	   10
+/* Means use 3x3 chainmask instead of configured chainmask */
+#define ATH_CHAINMASK_SEL_3X3		   7
+/* Default - Rssi threshold below which we have to switch to 3x3 */
+#define ATH_CHAINMASK_SEL_UP_RSSI_THRES	   20
+/* Default - Rssi threshold above which we have to switch to
+ * user configured values */
+#define ATH_CHAINMASK_SEL_DOWN_RSSI_THRES  35
+/* Struct to store the chainmask select related info */
+struct ath_chainmask_sel {
+	struct timer_list timer;
+	int cur_tx_mask; 	/* user configured or 3x3 */
+	int cur_rx_mask; 	/* user configured or 3x3 */
+	int tx_avgrssi;
+	u8 switch_allowed:1, 	/* timer will set this */
+	   cm_sel_enabled : 1;
+};
+
+int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an);
+void ath_update_chainmask(struct ath_softc *sc, int is_ht);
+
+/*************************/
+/* Descriptor Management */
+/*************************/
+
+/* Number of descriptors per buffer. The only case where we see skbuff
+chains is due to FF aggregation in the driver. */
+#define	ATH_TXDESC	    1
+/* if there's more fragment for this MSDU */
+#define ATH_BF_MORE_MPDU    1
+#define ATH_TXBUF_RESET(_bf) do {				\
+		(_bf)->bf_status = 0;				\
+		(_bf)->bf_lastbf = NULL;			\
+		(_bf)->bf_lastfrm = NULL;			\
+		(_bf)->bf_next = NULL;				\
+		memzero(&((_bf)->bf_state),			\
+			    sizeof(struct ath_buf_state));	\
+	} while (0)
+
+struct ath_buf_state {
+	int bfs_nframes;	/* # frames in aggregate */
+	u16 bfs_al;		/* length of aggregate */
+	u16 bfs_frmlen;		/* length of frame */
+	int bfs_seqno;		/* sequence number */
+	int bfs_tidno;		/* tid of this frame */
+	int bfs_retries;	/* current retries */
+	struct ath_rc_series bfs_rcs[4];	/* rate series */
+	u8 bfs_isdata:1;	/* is a data frame/aggregate */
+	u8 bfs_isaggr:1;	/* is an aggregate */
+	u8 bfs_isampdu:1;	/* is an a-mpdu, aggregate or not */
+	u8 bfs_ht:1;		/* is an HT frame */
+	u8 bfs_isretried:1;	/* is retried */
+	u8 bfs_isxretried:1;	/* is excessive retried */
+	u8 bfs_shpreamble:1;	/* is short preamble */
+	u8 bfs_isbar:1;		/* is a BAR */
+	u8 bfs_ispspoll:1;	/* is a PS-Poll */
+	u8 bfs_aggrburst:1;	/* is a aggr burst */
+	u8 bfs_calcairtime:1;	/* requests airtime be calculated
+				when set for tx frame */
+	int bfs_rifsburst_elem;	/* RIFS burst/bar */
+	int bfs_nrifsubframes;	/* # of elements in burst */
+	/* key type use to encrypt this frame */
+	enum ath9k_key_type bfs_keytype;
+};
+
+#define bf_nframes      	bf_state.bfs_nframes
+#define bf_al           	bf_state.bfs_al
+#define bf_frmlen       	bf_state.bfs_frmlen
+#define bf_retries      	bf_state.bfs_retries
+#define bf_seqno        	bf_state.bfs_seqno
+#define bf_tidno        	bf_state.bfs_tidno
+#define bf_rcs          	bf_state.bfs_rcs
+#define bf_isdata       	bf_state.bfs_isdata
+#define bf_isaggr       	bf_state.bfs_isaggr
+#define bf_isampdu      	bf_state.bfs_isampdu
+#define bf_ht           	bf_state.bfs_ht
+#define bf_isretried    	bf_state.bfs_isretried
+#define bf_isxretried   	bf_state.bfs_isxretried
+#define bf_shpreamble   	bf_state.bfs_shpreamble
+#define bf_rifsburst_elem  	bf_state.bfs_rifsburst_elem
+#define bf_nrifsubframes  	bf_state.bfs_nrifsubframes
+#define bf_keytype      	bf_state.bfs_keytype
+#define bf_isbar        	bf_state.bfs_isbar
+#define bf_ispspoll     	bf_state.bfs_ispspoll
+#define bf_aggrburst    	bf_state.bfs_aggrburst
+#define bf_calcairtime  	bf_state.bfs_calcairtime
+
+/*
+ * Abstraction of a contiguous buffer to transmit/receive.  There is only
+ * a single hw descriptor encapsulated here.
+ */
+
+struct ath_buf {
+	struct list_head list;
+	struct list_head *last;
+	struct ath_buf *bf_lastbf;	/* last buf of this unit (a frame or
+					   an aggregate) */
+	struct ath_buf *bf_lastfrm;	/* last buf of this frame */
+	struct ath_buf *bf_next;	/* next subframe in the aggregate */
+	struct ath_buf *bf_rifslast;	/* last buf for RIFS burst */
+	void *bf_mpdu;			/* enclosing frame structure */
+	void *bf_node;			/* pointer to the node */
+	struct ath_desc *bf_desc;	/* virtual addr of desc */
+	dma_addr_t bf_daddr;		/* physical addr of desc */
+	dma_addr_t bf_buf_addr;		/* physical addr of data buffer */
+	u32 bf_status;
+	u16 bf_flags;			/* tx descriptor flags */
+	struct ath_buf_state bf_state;	/* buffer state */
+	dma_addr_t bf_dmacontext;
+};
+
+/*
+ * reset the rx buffer.
+ * any new fields added to the athbuf and require
+ * reset need to be added to this macro.
+ * currently bf_status is the only one requires that
+ * requires reset.
+ */
+#define ATH_RXBUF_RESET(_bf)    ((_bf)->bf_status = 0)
+
+/* hw processing complete, desc processed by hal */
+#define ATH_BUFSTATUS_DONE      0x00000001
+/* hw processing complete, desc hold for hw */
+#define ATH_BUFSTATUS_STALE     0x00000002
+/* Rx-only: OS is done with this packet and it's ok to queued it to hw */
+#define ATH_BUFSTATUS_FREE      0x00000004
+
+/* DMA state for tx/rx descriptors */
+
+struct ath_descdma {
+	const char *dd_name;
+	struct ath_desc *dd_desc;	/* descriptors  */
+	dma_addr_t dd_desc_paddr;	/* physical addr of dd_desc  */
+	u32 dd_desc_len;		/* size of dd_desc  */
+	struct ath_buf *dd_bufptr;	/* associated buffers */
+	dma_addr_t dd_dmacontext;
+};
+
+/* Abstraction of a received RX MPDU/MMPDU, or a RX fragment */
+
+struct ath_rx_context {
+	struct ath_buf *ctx_rxbuf;	/* associated ath_buf for rx */
+};
+#define ATH_RX_CONTEXT(skb) ((struct ath_rx_context *)skb->cb)
+
+int ath_descdma_setup(struct ath_softc *sc,
+		      struct ath_descdma *dd,
+		      struct list_head *head,
+		      const char *name,
+		      int nbuf,
+		      int ndesc);
+int ath_desc_alloc(struct ath_softc *sc);
+void ath_desc_free(struct ath_softc *sc);
+void ath_descdma_cleanup(struct ath_softc *sc,
+			 struct ath_descdma *dd,
+			 struct list_head *head);
+
+/******/
+/* RX */
+/******/
+
+#define ATH_MAX_ANTENNA          3
+#define ATH_RXBUF                512
+#define ATH_RX_TIMEOUT           40      /* 40 milliseconds */
+#define WME_NUM_TID              16
+#define IEEE80211_BAR_CTL_TID_M  0xF000  /* tid mask */
+#define IEEE80211_BAR_CTL_TID_S  2       /* tid shift */
+
+enum ATH_RX_TYPE {
+	ATH_RX_NON_CONSUMED = 0,
+	ATH_RX_CONSUMED
+};
+
+/* per frame rx status block */
+struct ath_recv_status {
+	u64 tsf;		/* mac tsf */
+	int8_t rssi;		/* RSSI (noise floor ajusted) */
+	int8_t rssictl[ATH_MAX_ANTENNA];	/* RSSI (noise floor ajusted) */
+	int8_t rssiextn[ATH_MAX_ANTENNA];	/* RSSI (noise floor ajusted) */
+	int8_t abs_rssi;	/* absolute RSSI */
+	u8 rateieee;		/* data rate received (IEEE rate code) */
+	u8 ratecode;		/* phy rate code */
+	int rateKbps;		/* data rate received (Kbps) */
+	int antenna;		/* rx antenna */
+	int flags;		/* status of associated skb */
+#define ATH_RX_FCS_ERROR        0x01
+#define ATH_RX_MIC_ERROR        0x02
+#define ATH_RX_DECRYPT_ERROR    0x04
+#define ATH_RX_RSSI_VALID       0x08
+/* if any of ctl,extn chainrssis are valid */
+#define ATH_RX_CHAIN_RSSI_VALID 0x10
+/* if extn chain rssis are valid */
+#define ATH_RX_RSSI_EXTN_VALID  0x20
+/* set if 40Mhz, clear if 20Mhz */
+#define ATH_RX_40MHZ            0x40
+/* set if short GI, clear if full GI */
+#define ATH_RX_SHORT_GI         0x80
+};
+
+struct ath_rxbuf {
+	struct sk_buff *rx_wbuf;
+	unsigned long rx_time;			/* system time when received */
+	struct ath_recv_status rx_status;	/* cached rx status */
+};
+
+/* Per-TID aggregate receiver state for a node */
+struct ath_arx_tid {
+	struct ath_node *an;
+	struct ath_rxbuf *rxbuf;	/* re-ordering buffer */
+	struct timer_list timer;
+	spinlock_t tidlock;
+	int baw_head;			/* seq_next at head */
+	int baw_tail;			/* tail of block-ack window */
+	int seq_reset;			/* need to reset start sequence */
+	int addba_exchangecomplete;
+	u16 seq_next;			/* next expected sequence */
+	u16 baw_size;			/* block-ack window size */
+};
+
+/* Per-node receiver aggregate state */
+struct ath_arx {
+	struct ath_arx_tid tid[WME_NUM_TID];
+};
+
+int ath_startrecv(struct ath_softc *sc);
+bool ath_stoprecv(struct ath_softc *sc);
+void ath_flushrecv(struct ath_softc *sc);
+u32 ath_calcrxfilter(struct ath_softc *sc);
+void ath_rx_node_init(struct ath_softc *sc, struct ath_node *an);
+void ath_rx_node_free(struct ath_softc *sc, struct ath_node *an);
+void ath_rx_node_cleanup(struct ath_softc *sc, struct ath_node *an);
+void ath_handle_rx_intr(struct ath_softc *sc);
+int ath_rx_init(struct ath_softc *sc, int nbufs);
+void ath_rx_cleanup(struct ath_softc *sc);
+int ath_rx_tasklet(struct ath_softc *sc, int flush);
+int ath_rx_input(struct ath_softc *sc,
+		 struct ath_node *node,
+		 int is_ampdu,
+		 struct sk_buff *skb,
+		 struct ath_recv_status *rx_status,
+		 enum ATH_RX_TYPE *status);
+int ath__rx_indicate(struct ath_softc *sc,
+		    struct sk_buff *skb,
+		    struct ath_recv_status *status,
+		    u16 keyix);
+int ath_rx_subframe(struct ath_node *an, struct sk_buff *skb,
+		    struct ath_recv_status *status);
+
+/******/
+/* TX */
+/******/
+
+#define ATH_FRAG_PER_MSDU       1
+#define ATH_TXBUF               (512/ATH_FRAG_PER_MSDU)
+/* max number of transmit attempts (tries) */
+#define ATH_TXMAXTRY            13
+/* max number of 11n transmit attempts (tries) */
+#define ATH_11N_TXMAXTRY        10
+/* max number of tries for management and control frames */
+#define ATH_MGT_TXMAXTRY        4
+#define WME_BA_BMP_SIZE         64
+#define WME_MAX_BA              WME_BA_BMP_SIZE
+#define ATH_TID_MAX_BUFS        (2 * WME_MAX_BA)
+#define TID_TO_WME_AC(_tid)				\
+	((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE :	\
+	 (((_tid) == 1) || ((_tid) == 2)) ? WME_AC_BK :	\
+	 (((_tid) == 4) || ((_tid) == 5)) ? WME_AC_VI :	\
+	 WME_AC_VO)
+
+
+/* Wireless Multimedia Extension Defines */
+#define WME_AC_BE               0 /* best effort */
+#define WME_AC_BK               1 /* background */
+#define WME_AC_VI               2 /* video */
+#define WME_AC_VO               3 /* voice */
+#define WME_NUM_AC              4
+
+enum ATH_SM_PWRSAV{
+	ATH_SM_ENABLE,
+	ATH_SM_PWRSAV_STATIC,
+	ATH_SM_PWRSAV_DYNAMIC,
+};
+
+/*
+ * Data transmit queue state.  One of these exists for each
+ * hardware transmit queue.  Packets sent to us from above
+ * are assigned to queues based on their priority.  Not all
+ * devices support a complete set of hardware transmit queues.
+ * For those devices the array sc_ac2q will map multiple
+ * priorities to fewer hardware queues (typically all to one
+ * hardware queue).
+ */
+struct ath_txq {
+	u32 axq_qnum;			/* hardware q number */
+	u32 *axq_link;			/* link ptr in last TX desc */
+	struct list_head axq_q;		/* transmit queue */
+	spinlock_t axq_lock;
+	unsigned long axq_lockflags;	/* intr state when must cli */
+	u32 axq_depth;			/* queue depth */
+	u8 axq_aggr_depth;		/* aggregates queued */
+	u32 axq_totalqueued;		/* total ever queued */
+
+	/* count to determine if descriptor should generate int on this txq. */
+	u32 axq_intrcnt;
+
+	bool stopped;			/* Is mac80211 queue stopped ? */
+	struct ath_buf *axq_linkbuf;	/* virtual addr of last buffer*/
+
+	/* first desc of the last descriptor that contains CTS */
+	struct ath_desc *axq_lastdsWithCTS;
+
+	/* final desc of the gating desc that determines whether
+	   lastdsWithCTS has been DMA'ed or not */
+	struct ath_desc *axq_gatingds;
+
+	struct list_head axq_acq;
+};
+
+/* per TID aggregate tx state for a destination */
+struct ath_atx_tid {
+	struct list_head list;		/* round-robin tid entry */
+	struct list_head buf_q;		/* pending buffers */
+	struct ath_node *an;
+	struct ath_atx_ac *ac;
+	struct ath_buf *tx_buf[ATH_TID_MAX_BUFS]; /* active tx frames */
+	u16 seq_start;
+	u16 seq_next;
+	u16 baw_size;
+	int tidno;
+	int baw_head;			/* first un-acked tx buffer */
+	int baw_tail;			/* next unused tx buffer slot */
+	int sched;
+	int paused;
+	int cleanup_inprogress;
+	u32 addba_exchangecomplete:1;
+	int32_t addba_exchangeinprogress;
+	int addba_exchangeattempts;
+};
+
+/* per access-category aggregate tx state for a destination */
+struct ath_atx_ac {
+	int sched;			/* dest-ac is scheduled */
+	int qnum;			/* H/W queue number associated
+					   with this AC */
+	struct list_head list;		/* round-robin txq entry */
+	struct list_head tid_q;		/* queue of TIDs with buffers */
+};
+
+/* per dest tx state */
+struct ath_atx {
+	struct ath_atx_tid tid[WME_NUM_TID];
+	struct ath_atx_ac ac[WME_NUM_AC];
+};
+
+/* per-frame tx control block */
+struct ath_tx_control {
+	struct ath_node *an;
+	int if_id;
+	int qnum;
+	u32 ht:1;
+	u32 ps:1;
+	u32 use_minrate:1;
+	enum ath9k_pkt_type atype;
+	enum ath9k_key_type keytype;
+	u32 flags;
+	u16 seqno;
+	u16 tidno;
+	u16 txpower;
+	u16 frmlen;
+	u32 keyix;
+	int min_rate;
+	int mcast_rate;
+	u16 nextfraglen;
+	struct ath_softc *dev;
+	dma_addr_t dmacontext;
+};
+
+/* per frame tx status block */
+struct ath_xmit_status {
+	int retries;	/* number of retries to successufully
+			   transmit this frame */
+	int flags;	/* status of transmit */
+#define ATH_TX_ERROR        0x01
+#define ATH_TX_XRETRY       0x02
+#define ATH_TX_BAR          0x04
+};
+
+struct ath_tx_stat {
+	int rssi;		/* RSSI (noise floor ajusted) */
+	int rssictl[ATH_MAX_ANTENNA];	/* RSSI (noise floor ajusted) */
+	int rssiextn[ATH_MAX_ANTENNA];	/* RSSI (noise floor ajusted) */
+	int rateieee;		/* data rate xmitted (IEEE rate code) */
+	int rateKbps;		/* data rate xmitted (Kbps) */
+	int ratecode;		/* phy rate code */
+	int flags;		/* validity flags */
+/* if any of ctl,extn chain rssis are valid */
+#define ATH_TX_CHAIN_RSSI_VALID 0x01
+/* if extn chain rssis are valid */
+#define ATH_TX_RSSI_EXTN_VALID  0x02
+	u32 airtime;	/* time on air per final tx rate */
+};
+
+struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype);
+void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq);
+int ath_tx_setup(struct ath_softc *sc, int haltype);
+void ath_draintxq(struct ath_softc *sc, bool retry_tx);
+void ath_tx_draintxq(struct ath_softc *sc,
+	struct ath_txq *txq, bool retry_tx);
+void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an);
+void ath_tx_node_cleanup(struct ath_softc *sc,
+	struct ath_node *an, bool bh_flag);
+void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an);
+void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq);
+int ath_tx_init(struct ath_softc *sc, int nbufs);
+int ath_tx_cleanup(struct ath_softc *sc);
+int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype);
+int ath_txq_update(struct ath_softc *sc, int qnum,
+		   struct ath9k_tx_queue_info *q);
+int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb);
+void ath_tx_tasklet(struct ath_softc *sc);
+u32 ath_txq_depth(struct ath_softc *sc, int qnum);
+u32 ath_txq_aggr_depth(struct ath_softc *sc, int qnum);
+void ath_notify_txq_status(struct ath_softc *sc, u16 queue_depth);
+void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
+		     struct ath_xmit_status *tx_status, struct ath_node *an);
+
+/**********************/
+/* Node / Aggregation */
+/**********************/
+
+/* indicates the node is clened up */
+#define ATH_NODE_CLEAN          0x1
+/* indicates the node is 80211 power save */
+#define ATH_NODE_PWRSAVE        0x2
+
+#define ADDBA_TIMEOUT              200 /* 200 milliseconds */
+#define ADDBA_EXCHANGE_ATTEMPTS    10
+#define ATH_AGGR_DELIM_SZ          4   /* delimiter size   */
+#define ATH_AGGR_MINPLEN           256 /* in bytes, minimum packet length */
+/* number of delimiters for encryption padding */
+#define ATH_AGGR_ENCRYPTDELIM      10
+/* minimum h/w qdepth to be sustained to maximize aggregation */
+#define ATH_AGGR_MIN_QDEPTH        2
+#define ATH_AMPDU_SUBFRAME_DEFAULT 32
+#define IEEE80211_SEQ_SEQ_SHIFT    4
+#define IEEE80211_SEQ_MAX          4096
+#define IEEE80211_MIN_AMPDU_BUF    0x8
+
+/* return whether a bit at index _n in bitmap _bm is set
+ * _sz is the size of the bitmap  */
+#define ATH_BA_ISSET(_bm, _n)  (((_n) < (WME_BA_BMP_SIZE)) &&		\
+				((_bm)[(_n) >> 5] & (1 << ((_n) & 31))))
+
+/* return block-ack bitmap index given sequence and starting sequence */
+#define ATH_BA_INDEX(_st, _seq) (((_seq) - (_st)) & (IEEE80211_SEQ_MAX - 1))
+
+/* returns delimiter padding required given the packet length */
+#define ATH_AGGR_GET_NDELIM(_len)					\
+	(((((_len) + ATH_AGGR_DELIM_SZ) < ATH_AGGR_MINPLEN) ?           \
+	  (ATH_AGGR_MINPLEN - (_len) - ATH_AGGR_DELIM_SZ) : 0) >> 2)
+
+#define BAW_WITHIN(_start, _bawsz, _seqno) \
+	((((_seqno) - (_start)) & 4095) < (_bawsz))
+
+#define ATH_DS_BA_SEQ(_ds)               ((_ds)->ds_us.tx.ts_seqnum)
+#define ATH_DS_BA_BITMAP(_ds)            (&(_ds)->ds_us.tx.ba_low)
+#define ATH_DS_TX_BA(_ds)	((_ds)->ds_us.tx.ts_flags & ATH9K_TX_BA)
+#define ATH_AN_2_TID(_an, _tidno)        (&(_an)->an_aggr.tx.tid[(_tidno)])
+
+enum ATH_AGGR_STATUS {
+	ATH_AGGR_DONE,
+	ATH_AGGR_BAW_CLOSED,
+	ATH_AGGR_LIMITED,
+	ATH_AGGR_SHORTPKT,
+	ATH_AGGR_8K_LIMITED,
+};
+
+enum ATH_AGGR_CHECK {
+	AGGR_NOT_REQUIRED,
+	AGGR_REQUIRED,
+	AGGR_CLEANUP_PROGRESS,
+	AGGR_EXCHANGE_PROGRESS,
+	AGGR_EXCHANGE_DONE
+};
+
+struct aggr_rifs_param {
+	int param_max_frames;
+	int param_max_len;
+	int param_rl;
+	int param_al;
+	struct ath_rc_series *param_rcs;
+};
+
+/* Per-node aggregation state */
+struct ath_node_aggr {
+	struct ath_atx tx;	/* node transmit state */
+	struct ath_arx rx;	/* node receive state */
+};
+
+/* driver-specific node state */
+struct ath_node {
+	struct list_head list;
+	struct ath_softc *an_sc;
+	atomic_t an_refcnt;
+	struct ath_chainmask_sel an_chainmask_sel;
+	struct ath_node_aggr an_aggr;
+	u8 an_smmode; /* SM Power save mode */
+	u8 an_flags;
+	u8 an_addr[ETH_ALEN];
+};
+
+void ath_tx_resume_tid(struct ath_softc *sc,
+	struct ath_atx_tid *tid);
+enum ATH_AGGR_CHECK ath_tx_aggr_check(struct ath_softc *sc,
+	struct ath_node *an, u8 tidno);
+void ath_tx_aggr_teardown(struct ath_softc *sc,
+	struct ath_node *an, u8 tidno);
+void ath_rx_aggr_teardown(struct ath_softc *sc,
+	struct ath_node *an, u8 tidno);
+int ath_rx_aggr_start(struct ath_softc *sc,
+		      const u8 *addr,
+		      u16 tid,
+		      u16 *ssn);
+int ath_rx_aggr_stop(struct ath_softc *sc,
+		     const u8 *addr,
+		     u16 tid);
+int ath_tx_aggr_start(struct ath_softc *sc,
+		      const u8 *addr,
+		      u16 tid,
+		      u16 *ssn);
+int ath_tx_aggr_stop(struct ath_softc *sc,
+		     const u8 *addr,
+		     u16 tid);
+void ath_newassoc(struct ath_softc *sc,
+	struct ath_node *node, int isnew, int isuapsd);
+struct ath_node *ath_node_attach(struct ath_softc *sc,
+	u8 addr[ETH_ALEN], int if_id);
+void ath_node_detach(struct ath_softc *sc, struct ath_node *an, bool bh_flag);
+struct ath_node *ath_node_get(struct ath_softc *sc, u8 addr[ETH_ALEN]);
+void ath_node_put(struct ath_softc *sc, struct ath_node *an, bool bh_flag);
+struct ath_node *ath_node_find(struct ath_softc *sc, u8 *addr);
+
+/*******************/
+/* Beacon Handling */
+/*******************/
+
+/*
+ * Regardless of the number of beacons we stagger, (i.e. regardless of the
+ * number of BSSIDs) if a given beacon does not go out even after waiting this
+ * number of beacon intervals, the game's up.
+ */
+#define BSTUCK_THRESH           	(9 * ATH_BCBUF)
+#define	ATH_BCBUF               	4   /* number of beacon buffers */
+#define ATH_DEFAULT_BINTVAL     	100 /* default beacon interval in TU */
+#define ATH_DEFAULT_BMISS_LIMIT 	10
+#define	ATH_BEACON_AIFS_DEFAULT		0  /* Default aifs for ap beacon q */
+#define	ATH_BEACON_CWMIN_DEFAULT	0  /* Default cwmin for ap beacon q */
+#define	ATH_BEACON_CWMAX_DEFAULT	0  /* Default cwmax for ap beacon q */
+#define IEEE80211_MS_TO_TU(x)           (((x) * 1000) / 1024)
+
+/* beacon configuration */
+struct ath_beacon_config {
+	u16 beacon_interval;
+	u16 listen_interval;
+	u16 dtim_period;
+	u16 bmiss_timeout;
+	u8 dtim_count;
+	u8 tim_offset;
+	union {
+		u64 last_tsf;
+		u8 last_tstamp[8];
+	} u; /* last received beacon/probe response timestamp of this BSS. */
+};
+
+/* offsets in a beacon frame for
+ * quick acess of beacon content by low-level driver */
+struct ath_beacon_offset {
+	u8 *bo_tim;	/* start of atim/dtim */
+};
+
+void ath9k_beacon_tasklet(unsigned long data);
+void ath_beacon_config(struct ath_softc *sc, int if_id);
+int ath_beaconq_setup(struct ath_hal *ah);
+int ath_beacon_alloc(struct ath_softc *sc, int if_id);
+void ath_bstuck_process(struct ath_softc *sc);
+void ath_beacon_tasklet(struct ath_softc *sc, int *needmark);
+void ath_beacon_free(struct ath_softc *sc);
+void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp);
+void ath_beacon_sync(struct ath_softc *sc, int if_id);
+void ath_update_beacon_info(struct ath_softc *sc, int avgbrssi);
+void ath_get_beaconconfig(struct ath_softc *sc,
+			  int if_id,
+			  struct ath_beacon_config *conf);
+int ath_update_beacon(struct ath_softc *sc,
+		      int if_id,
+		      struct ath_beacon_offset *bo,
+		      struct sk_buff *skb,
+		      int mcast);
+/********/
+/* VAPs */
+/********/
+
+/*
+ * Define the scheme that we select MAC address for multiple
+ * BSS on the same radio. The very first VAP will just use the MAC
+ * address from the EEPROM. For the next 3 VAPs, we set the
+ * U/L bit (bit 1) in MAC address, and use the next two bits as the
+ * index of the VAP.
+ */
+
+#define ATH_SET_VAP_BSSID_MASK(bssid_mask) \
+	((bssid_mask)[0] &= ~(((ATH_BCBUF-1)<<2)|0x02))
+
+/* VAP configuration (from protocol layer) */
+struct ath_vap_config {
+	u32 av_fixed_rateset;
+	u32 av_fixed_retryset;
+};
+
+/* driver-specific vap state */
+struct ath_vap {
+	struct ieee80211_vif *av_if_data;
+	enum ath9k_opmode av_opmode;	/* VAP operational mode */
+	struct ath_buf *av_bcbuf;	/* beacon buffer */
+	struct ath_beacon_offset av_boff; /* dynamic update state */
+	struct ath_tx_control av_btxctl;  /* txctl information for beacon */
+	int av_bslot;			/* beacon slot index */
+	struct ath_txq av_mcastq;	/* multicast transmit queue */
+	struct ath_vap_config av_config;/* vap configuration parameters*/
+	struct ath_rate_node *rc_node;
+};
+
+int ath_vap_attach(struct ath_softc *sc,
+		   int if_id,
+		   struct ieee80211_vif *if_data,
+		   enum ath9k_opmode opmode);
+int ath_vap_detach(struct ath_softc *sc, int if_id);
+int ath_vap_config(struct ath_softc *sc,
+	int if_id, struct ath_vap_config *if_config);
+int ath_vap_listen(struct ath_softc *sc, int if_id);
+
+/*********************/
+/* Antenna diversity */
+/*********************/
+
+#define ATH_ANT_DIV_MAX_CFG      2
+#define ATH_ANT_DIV_MIN_IDLE_US  1000000  /* us */
+#define ATH_ANT_DIV_MIN_SCAN_US  50000	  /* us */
+
+enum ATH_ANT_DIV_STATE{
+	ATH_ANT_DIV_IDLE,
+	ATH_ANT_DIV_SCAN,	/* evaluating antenna */
+};
+
+struct ath_antdiv {
+	struct ath_softc *antdiv_sc;
+	u8 antdiv_start;
+	enum ATH_ANT_DIV_STATE antdiv_state;
+	u8 antdiv_num_antcfg;
+	u8 antdiv_curcfg;
+	u8 antdiv_bestcfg;
+	int32_t antdivf_rssitrig;
+	int32_t antdiv_lastbrssi[ATH_ANT_DIV_MAX_CFG];
+	u64 antdiv_lastbtsf[ATH_ANT_DIV_MAX_CFG];
+	u64 antdiv_laststatetsf;
+	u8 antdiv_bssid[ETH_ALEN];
+};
+
+void ath_slow_ant_div_init(struct ath_antdiv *antdiv,
+	struct ath_softc *sc, int32_t rssitrig);
+void ath_slow_ant_div_start(struct ath_antdiv *antdiv,
+			    u8 num_antcfg,
+			    const u8 *bssid);
+void ath_slow_ant_div_stop(struct ath_antdiv *antdiv);
+void ath_slow_ant_div(struct ath_antdiv *antdiv,
+		      struct ieee80211_hdr *wh,
+		      struct ath_rx_status *rx_stats);
+void ath_setdefantenna(void *sc, u32 antenna);
+
+/********************/
+/* Main driver core */
+/********************/
+
+/*
+ * Default cache line size, in bytes.
+ * Used when PCI device not fully initialized by bootrom/BIOS
+*/
+#define DEFAULT_CACHELINE       32
+#define	ATH_DEFAULT_NOISE_FLOOR -95
+#define ATH_REGCLASSIDS_MAX     10
+#define ATH_CABQ_READY_TIME     80  /* % of beacon interval */
+#define ATH_PREAMBLE_SHORT	(1<<0)
+#define ATH_PROTECT_ENABLE	(1<<1)
+#define ATH_MAX_SW_RETRIES      10
+/* Num farmes difference in tx to flip default recv */
+#define	ATH_ANTENNA_DIFF	2
+#define ATH_CHAN_MAX            255
+#define IEEE80211_WEP_NKID      4       /* number of key ids */
+#define IEEE80211_RATE_VAL      0x7f
+/*
+ * The key cache is used for h/w cipher state and also for
+ * tracking station state such as the current tx antenna.
+ * We also setup a mapping table between key cache slot indices
+ * and station state to short-circuit node lookups on rx.
+ * Different parts have different size key caches.  We handle
+ * up to ATH_KEYMAX entries (could dynamically allocate state).
+ */
+#define	ATH_KEYMAX	        128        /* max key cache size we handle */
+
+#define RESET_RETRY_TXQ         0x00000001
+#define ATH_IF_ID_ANY   	0xff
+
+#define ATH_TXPOWER_MAX         100     /* .5 dBm units */
+
+#define RSSI_LPF_THRESHOLD         -20
+#define ATH_RSSI_EP_MULTIPLIER     (1<<7)  /* pow2 to optimize out * and / */
+#define ATH_RATE_DUMMY_MARKER      0
+#define ATH_RSSI_LPF_LEN           10
+#define ATH_RSSI_DUMMY_MARKER      0x127
+
+#define ATH_EP_MUL(x, mul)         ((x) * (mul))
+#define ATH_EP_RND(x, mul)						\
+	((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
+#define ATH_RSSI_OUT(x)							\
+	(((x) != ATH_RSSI_DUMMY_MARKER) ?				\
+	 (ATH_EP_RND((x), ATH_RSSI_EP_MULTIPLIER)) : ATH_RSSI_DUMMY_MARKER)
+#define ATH_RSSI_IN(x)					\
+	(ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
+#define ATH_LPF_RSSI(x, y, len)						\
+	((x != ATH_RSSI_DUMMY_MARKER) ? \
+		(((x) * ((len) - 1) + (y)) / (len)) : (y))
+#define ATH_RSSI_LPF(x, y) do {						\
+		if ((y) >= RSSI_LPF_THRESHOLD)				\
+			x = ATH_LPF_RSSI((x), \
+				ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN); \
+	} while (0)
+
+
+enum PROT_MODE {
+	PROT_M_NONE = 0,
+	PROT_M_RTSCTS,
+	PROT_M_CTSONLY
+};
+
+enum RATE_TYPE {
+	NORMAL_RATE = 0,
+	HALF_RATE,
+	QUARTER_RATE
+};
+
+struct ath_ht_info {
+	enum ath9k_ht_macmode tx_chan_width;
+	u16 maxampdu;
+	u8 mpdudensity;
+	u8 ext_chan_offset;
+};
+
+struct ath_softc {
+	struct ieee80211_hw *hw;
+	struct pci_dev *pdev;
+	void __iomem *mem;
+	struct tasklet_struct intr_tq;
+	struct tasklet_struct bcon_tasklet;
+	struct ath_config sc_config;	/* load-time parameters */
+	int sc_debug;
+	struct ath_hal *sc_ah;
+	struct ath_rate_softc *sc_rc;	/* tx rate control support */
+	u32 sc_intrstatus;
+	enum ath9k_opmode sc_opmode;	/* current operating mode */
+
+	u8 sc_invalid;			/* being detached */
+	u8 sc_beacons;			/* beacons running */
+	u8 sc_scanning;			/* scanning active */
+	u8 sc_txaggr;			/* enable 11n tx aggregation */
+	u8 sc_rxaggr;			/* enable 11n rx aggregation */
+	u8 sc_update_chainmask;		/* change chain mask */
+	u8 sc_full_reset;		/* force full reset */
+	enum wireless_mode sc_curmode;	/* current phy mode */
+	u16 sc_curtxpow;
+	u16 sc_curaid;
+	u8 sc_curbssid[ETH_ALEN];
+	u8 sc_myaddr[ETH_ALEN];
+	enum PROT_MODE sc_protmode;
+	u8 sc_mcastantenna;
+	u8 sc_txantenna;		/* data tx antenna (fixed or auto) */
+	u8 sc_nbcnvaps;			/* # of vaps sending beacons */
+	u16 sc_nvaps;			/* # of active virtual ap's */
+	struct ath_vap *sc_vaps[ATH_BCBUF];
+	enum ath9k_int sc_imask;
+	u8 sc_bssidmask[ETH_ALEN];
+	u8 sc_defant;			/* current default antenna */
+	u8 sc_rxotherant;		/* rx's on non-default antenna */
+	u16 sc_cachelsz;
+	int sc_slotupdate;		/* slot to next advance fsm */
+	int sc_slottime;
+	u8 sc_noreset;
+	int sc_bslot[ATH_BCBUF];
+	struct ath9k_node_stats sc_halstats; /* station-mode rssi stats */
+	struct list_head node_list;
+	struct ath_ht_info sc_ht_info;
+	int16_t sc_noise_floor;		/* signal noise floor in dBm */
+	enum ath9k_ht_extprotspacing sc_ht_extprotspacing;
+	u8 sc_tx_chainmask;
+	u8 sc_rx_chainmask;
+	u8 sc_rxchaindetect_ref;
+	u8 sc_rxchaindetect_thresh5GHz;
+	u8 sc_rxchaindetect_thresh2GHz;
+	u8 sc_rxchaindetect_delta5GHz;
+	u8 sc_rxchaindetect_delta2GHz;
+	u32 sc_rtsaggrlimit;		/* Chipset specific aggr limit */
+	u32 sc_flags;
+#ifdef CONFIG_SLOW_ANT_DIV
+	struct ath_antdiv sc_antdiv;
+#endif
+	enum {
+		OK,		/* no change needed */
+		UPDATE,		/* update pending */
+		COMMIT		/* beacon sent, commit change */
+	} sc_updateslot;	/* slot time update fsm */
+
+	/* Crypto */
+	u32 sc_keymax;		/* size of key cache */
+	DECLARE_BITMAP(sc_keymap, ATH_KEYMAX);	/* key use bit map */
+	u8 sc_splitmic;		/* split TKIP MIC keys */
+	int sc_keytype;
+
+	/* RX */
+	struct list_head sc_rxbuf;
+	struct ath_descdma sc_rxdma;
+	int sc_rxbufsize;	/* rx size based on mtu */
+	u32 *sc_rxlink;		/* link ptr in last RX desc */
+	u32 sc_rxflush;		/* rx flush in progress */
+	u64 sc_lastrx;		/* tsf of last rx'd frame */
+
+	/* TX */
+	struct list_head sc_txbuf;
+	struct ath_txq sc_txq[ATH9K_NUM_TX_QUEUES];
+	struct ath_descdma sc_txdma;
+	u32 sc_txqsetup;
+	u32 sc_txintrperiod;	/* tx interrupt batching */
+	int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME	AC -> h/w qnum */
+	u32 sc_ant_tx[8];	/* recent tx frames/antenna */
+	u16 seq_no; /* TX sequence number */
+
+	/* Beacon */
+	struct ath9k_tx_queue_info sc_beacon_qi;
+	struct ath_descdma sc_bdma;
+	struct ath_txq *sc_cabq;
+	struct list_head sc_bbuf;
+	u32 sc_bhalq;
+	u32 sc_bmisscount;
+	u32 ast_be_xmit;	/* beacons transmitted */
+
+	/* Rate */
+	struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX];
+	const struct ath9k_rate_table *sc_currates;
+	u8 sc_rixmap[256];	/* IEEE to h/w rate table ix */
+	u8 sc_protrix;		/* protection rate index */
+	struct {
+		u32 rateKbps;	/* transfer rate in kbs */
+		u8 ieeerate;	/* IEEE rate */
+	} sc_hwmap[256];	/* h/w rate ix mappings */
+
+	/* Channel, Band */
+	struct ieee80211_channel channels[IEEE80211_NUM_BANDS][ATH_CHAN_MAX];
+	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
+	struct ath9k_channel sc_curchan;
+
+	/* Locks */
+	spinlock_t sc_rxflushlock;
+	spinlock_t sc_rxbuflock;
+	spinlock_t sc_txbuflock;
+	spinlock_t sc_resetlock;
+	spinlock_t node_lock;
+};
+
+int ath_init(u16 devid, struct ath_softc *sc);
+void ath_deinit(struct ath_softc *sc);
+int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan);
+int ath_suspend(struct ath_softc *sc);
+irqreturn_t ath_isr(int irq, void *dev);
+int ath_reset(struct ath_softc *sc);
+void ath_scan_start(struct ath_softc *sc);
+void ath_scan_end(struct ath_softc *sc);
+int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan);
+void ath_setup_rate(struct ath_softc *sc,
+		    enum wireless_mode wMode,
+		    enum RATE_TYPE type,
+		    const struct ath9k_rate_table *rt);
+
+/*********************/
+/* Utility Functions */
+/*********************/
+
+void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot);
+int ath_keyset(struct ath_softc *sc,
+	       u16 keyix,
+	       struct ath9k_keyval *hk,
+	       const u8 mac[ETH_ALEN]);
+int ath_get_hal_qnum(u16 queue, struct ath_softc *sc);
+int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
+void ath_setslottime(struct ath_softc *sc);
+void ath_update_txpow(struct ath_softc *sc);
+int ath_cabq_update(struct ath_softc *);
+void ath_get_currentCountry(struct ath_softc *sc,
+	struct ath9k_country_entry *ctry);
+u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp);
+void ath_internal_reset(struct ath_softc *sc);
+u32 ath_chan2flags(struct ieee80211_channel *chan, struct ath_softc *sc);
+dma_addr_t ath_skb_map_single(struct ath_softc *sc,
+			      struct sk_buff *skb,
+			      int direction,
+			      dma_addr_t *pa);
+void ath_skb_unmap_single(struct ath_softc *sc,
+			  struct sk_buff *skb,
+			  int direction,
+			  dma_addr_t *pa);
+void ath_mcast_merge(struct ath_softc *sc, u32 mfilt[2]);
+enum ath9k_ht_macmode ath_cwm_macmode(struct ath_softc *sc);
+
+#endif /* CORE_H */
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
new file mode 100644
index 00000000000..6dbfed0b414
--- /dev/null
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -0,0 +1,8575 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/io.h>
+#include <asm/unaligned.h>
+
+#include "core.h"
+#include "hw.h"
+#include "reg.h"
+#include "phy.h"
+#include "initvals.h"
+
+static void ath9k_hw_iqcal_collect(struct ath_hal *ah);
+static void ath9k_hw_iqcalibrate(struct ath_hal *ah, u8 numChains);
+static void ath9k_hw_adc_gaincal_collect(struct ath_hal *ah);
+static void ath9k_hw_adc_gaincal_calibrate(struct ath_hal *ah,
+					   u8 numChains);
+static void ath9k_hw_adc_dccal_collect(struct ath_hal *ah);
+static void ath9k_hw_adc_dccal_calibrate(struct ath_hal *ah,
+					 u8 numChains);
+
+static const u8 CLOCK_RATE[] = { 40, 80, 22, 44, 88, 40 };
+static const int16_t NOISE_FLOOR[] = { -96, -93, -98, -96, -93, -96 };
+
+static const struct hal_percal_data iq_cal_multi_sample = {
+	IQ_MISMATCH_CAL,
+	MAX_CAL_SAMPLES,
+	PER_MIN_LOG_COUNT,
+	ath9k_hw_iqcal_collect,
+	ath9k_hw_iqcalibrate
+};
+static const struct hal_percal_data iq_cal_single_sample = {
+	IQ_MISMATCH_CAL,
+	MIN_CAL_SAMPLES,
+	PER_MAX_LOG_COUNT,
+	ath9k_hw_iqcal_collect,
+	ath9k_hw_iqcalibrate
+};
+static const struct hal_percal_data adc_gain_cal_multi_sample = {
+	ADC_GAIN_CAL,
+	MAX_CAL_SAMPLES,
+	PER_MIN_LOG_COUNT,
+	ath9k_hw_adc_gaincal_collect,
+	ath9k_hw_adc_gaincal_calibrate
+};
+static const struct hal_percal_data adc_gain_cal_single_sample = {
+	ADC_GAIN_CAL,
+	MIN_CAL_SAMPLES,
+	PER_MAX_LOG_COUNT,
+	ath9k_hw_adc_gaincal_collect,
+	ath9k_hw_adc_gaincal_calibrate
+};
+static const struct hal_percal_data adc_dc_cal_multi_sample = {
+	ADC_DC_CAL,
+	MAX_CAL_SAMPLES,
+	PER_MIN_LOG_COUNT,
+	ath9k_hw_adc_dccal_collect,
+	ath9k_hw_adc_dccal_calibrate
+};
+static const struct hal_percal_data adc_dc_cal_single_sample = {
+	ADC_DC_CAL,
+	MIN_CAL_SAMPLES,
+	PER_MAX_LOG_COUNT,
+	ath9k_hw_adc_dccal_collect,
+	ath9k_hw_adc_dccal_calibrate
+};
+static const struct hal_percal_data adc_init_dc_cal = {
+	ADC_DC_INIT_CAL,
+	MIN_CAL_SAMPLES,
+	INIT_LOG_COUNT,
+	ath9k_hw_adc_dccal_collect,
+	ath9k_hw_adc_dccal_calibrate
+};
+
+static const struct ath_hal ar5416hal = {
+	AR5416_MAGIC,
+	0,
+	0,
+	NULL,
+	NULL,
+	CTRY_DEFAULT,
+	0,
+	0,
+	0,
+	0,
+	0,
+	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	},
+};
+
+static struct ath9k_rate_table ar5416_11a_table = {
+	8,
+	{0},
+	{
+		{true, PHY_OFDM, 6000, 0x0b, 0x00, (0x80 | 12), 0},
+		{true, PHY_OFDM, 9000, 0x0f, 0x00, 18, 0},
+		{true, PHY_OFDM, 12000, 0x0a, 0x00, (0x80 | 24), 2},
+		{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 2},
+		{true, PHY_OFDM, 24000, 0x09, 0x00, (0x80 | 48), 4},
+		{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 4},
+		{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 4},
+		{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 4}
+	},
+};
+
+static struct ath9k_rate_table ar5416_11b_table = {
+	4,
+	{0},
+	{
+		{true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0},
+		{true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1},
+		{true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 1},
+		{true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 1}
+	},
+};
+
+static struct ath9k_rate_table ar5416_11g_table = {
+	12,
+	{0},
+	{
+		{true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0},
+		{true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1},
+		{true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 2},
+		{true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 3},
+
+		{false, PHY_OFDM, 6000, 0x0b, 0x00, 12, 4},
+		{false, PHY_OFDM, 9000, 0x0f, 0x00, 18, 4},
+		{true, PHY_OFDM, 12000, 0x0a, 0x00, 24, 6},
+		{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 6},
+		{true, PHY_OFDM, 24000, 0x09, 0x00, 48, 8},
+		{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 8},
+		{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 8},
+		{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 8}
+	},
+};
+
+static struct ath9k_rate_table ar5416_11ng_table = {
+	28,
+	{0},
+	{
+		{true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0},
+		{true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1},
+		{true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 2},
+		{true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 3},
+
+		{false, PHY_OFDM, 6000, 0x0b, 0x00, 12, 4},
+		{false, PHY_OFDM, 9000, 0x0f, 0x00, 18, 4},
+		{true, PHY_OFDM, 12000, 0x0a, 0x00, 24, 6},
+		{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 6},
+		{true, PHY_OFDM, 24000, 0x09, 0x00, 48, 8},
+		{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 8},
+		{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 8},
+		{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 8},
+		{true, PHY_HT, 6500, 0x80, 0x00, 0, 4},
+		{true, PHY_HT, 13000, 0x81, 0x00, 1, 6},
+		{true, PHY_HT, 19500, 0x82, 0x00, 2, 6},
+		{true, PHY_HT, 26000, 0x83, 0x00, 3, 8},
+		{true, PHY_HT, 39000, 0x84, 0x00, 4, 8},
+		{true, PHY_HT, 52000, 0x85, 0x00, 5, 8},
+		{true, PHY_HT, 58500, 0x86, 0x00, 6, 8},
+		{true, PHY_HT, 65000, 0x87, 0x00, 7, 8},
+		{true, PHY_HT, 13000, 0x88, 0x00, 8, 4},
+		{true, PHY_HT, 26000, 0x89, 0x00, 9, 6},
+		{true, PHY_HT, 39000, 0x8a, 0x00, 10, 6},
+		{true, PHY_HT, 52000, 0x8b, 0x00, 11, 8},
+		{true, PHY_HT, 78000, 0x8c, 0x00, 12, 8},
+		{true, PHY_HT, 104000, 0x8d, 0x00, 13, 8},
+		{true, PHY_HT, 117000, 0x8e, 0x00, 14, 8},
+		{true, PHY_HT, 130000, 0x8f, 0x00, 15, 8},
+	},
+};
+
+static struct ath9k_rate_table ar5416_11na_table = {
+	24,
+	{0},
+	{
+		{true, PHY_OFDM, 6000, 0x0b, 0x00, (0x80 | 12), 0},
+		{true, PHY_OFDM, 9000, 0x0f, 0x00, 18, 0},
+		{true, PHY_OFDM, 12000, 0x0a, 0x00, (0x80 | 24), 2},
+		{true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 2},
+		{true, PHY_OFDM, 24000, 0x09, 0x00, (0x80 | 48), 4},
+		{true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 4},
+		{true, PHY_OFDM, 48000, 0x08, 0x00, 96, 4},
+		{true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 4},
+		{true, PHY_HT, 6500, 0x80, 0x00, 0, 0},
+		{true, PHY_HT, 13000, 0x81, 0x00, 1, 2},
+		{true, PHY_HT, 19500, 0x82, 0x00, 2, 2},
+		{true, PHY_HT, 26000, 0x83, 0x00, 3, 4},
+		{true, PHY_HT, 39000, 0x84, 0x00, 4, 4},
+		{true, PHY_HT, 52000, 0x85, 0x00, 5, 4},
+		{true, PHY_HT, 58500, 0x86, 0x00, 6, 4},
+		{true, PHY_HT, 65000, 0x87, 0x00, 7, 4},
+		{true, PHY_HT, 13000, 0x88, 0x00, 8, 0},
+		{true, PHY_HT, 26000, 0x89, 0x00, 9, 2},
+		{true, PHY_HT, 39000, 0x8a, 0x00, 10, 2},
+		{true, PHY_HT, 52000, 0x8b, 0x00, 11, 4},
+		{true, PHY_HT, 78000, 0x8c, 0x00, 12, 4},
+		{true, PHY_HT, 104000, 0x8d, 0x00, 13, 4},
+		{true, PHY_HT, 117000, 0x8e, 0x00, 14, 4},
+		{true, PHY_HT, 130000, 0x8f, 0x00, 15, 4},
+	},
+};
+
+static enum wireless_mode ath9k_hw_chan2wmode(struct ath_hal *ah,
+				       const struct ath9k_channel *chan)
+{
+	if (IS_CHAN_CCK(chan))
+		return ATH9K_MODE_11A;
+	if (IS_CHAN_G(chan))
+		return ATH9K_MODE_11G;
+	return ATH9K_MODE_11A;
+}
+
+static bool ath9k_hw_wait(struct ath_hal *ah,
+			  u32 reg,
+			  u32 mask,
+			  u32 val)
+{
+	int i;
+
+	for (i = 0; i < (AH_TIMEOUT / AH_TIME_QUANTUM); i++) {
+		if ((REG_READ(ah, reg) & mask) == val)
+			return true;
+
+		udelay(AH_TIME_QUANTUM);
+	}
+	DPRINTF(ah->ah_sc, ATH_DBG_PHY_IO,
+		 "%s: timeout on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
+		 __func__, reg, REG_READ(ah, reg), mask, val);
+	return false;
+}
+
+static bool ath9k_hw_eeprom_read(struct ath_hal *ah, u32 off,
+				 u16 *data)
+{
+	(void) REG_READ(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
+
+	if (!ath9k_hw_wait(ah,
+			   AR_EEPROM_STATUS_DATA,
+			   AR_EEPROM_STATUS_DATA_BUSY |
+			   AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0)) {
+		return false;
+	}
+
+	*data = MS(REG_READ(ah, AR_EEPROM_STATUS_DATA),
+		   AR_EEPROM_STATUS_DATA_VAL);
+
+	return true;
+}
+
+static int ath9k_hw_flash_map(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	ahp->ah_cal_mem = ioremap(AR5416_EEPROM_START_ADDR, AR5416_EEPROM_MAX);
+
+	if (!ahp->ah_cal_mem) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "%s: cannot remap eeprom region \n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static bool ath9k_hw_flash_read(struct ath_hal *ah, u32 off,
+				u16 *data)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	*data = ioread16(ahp->ah_cal_mem + off);
+	return true;
+}
+
+static void ath9k_hw_read_revisions(struct ath_hal *ah)
+{
+	u32 val;
+
+	val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
+
+	if (val == 0xFF) {
+		val = REG_READ(ah, AR_SREV);
+
+		ah->ah_macVersion =
+			(val & AR_SREV_VERSION2) >> AR_SREV_TYPE2_S;
+
+		ah->ah_macRev = MS(val, AR_SREV_REVISION2);
+		ah->ah_isPciExpress =
+			(val & AR_SREV_TYPE2_HOST_MODE) ? 0 : 1;
+
+	} else {
+		if (!AR_SREV_9100(ah))
+			ah->ah_macVersion = MS(val, AR_SREV_VERSION);
+
+		ah->ah_macRev = val & AR_SREV_REVISION;
+
+		if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCIE)
+			ah->ah_isPciExpress = true;
+	}
+}
+
+u32 ath9k_hw_reverse_bits(u32 val, u32 n)
+{
+	u32 retval;
+	int i;
+
+	for (i = 0, retval = 0; i < n; i++) {
+		retval = (retval << 1) | (val & 1);
+		val >>= 1;
+	}
+	return retval;
+}
+
+static void ath9k_hw_set_defaults(struct ath_hal *ah)
+{
+	int i;
+
+	ah->ah_config.dma_beacon_response_time = 2;
+	ah->ah_config.sw_beacon_response_time = 10;
+	ah->ah_config.additional_swba_backoff = 0;
+	ah->ah_config.ack_6mb = 0x0;
+	ah->ah_config.cwm_ignore_extcca = 0;
+	ah->ah_config.pcie_powersave_enable = 0;
+	ah->ah_config.pcie_l1skp_enable = 0;
+	ah->ah_config.pcie_clock_req = 0;
+	ah->ah_config.pcie_power_reset = 0x100;
+	ah->ah_config.pcie_restore = 0;
+	ah->ah_config.pcie_waen = 0;
+	ah->ah_config.analog_shiftreg = 1;
+	ah->ah_config.ht_enable = 1;
+	ah->ah_config.ofdm_trig_low = 200;
+	ah->ah_config.ofdm_trig_high = 500;
+	ah->ah_config.cck_trig_high = 200;
+	ah->ah_config.cck_trig_low = 100;
+	ah->ah_config.enable_ani = 0;
+	ah->ah_config.noise_immunity_level = 4;
+	ah->ah_config.ofdm_weaksignal_det = 1;
+	ah->ah_config.cck_weaksignal_thr = 0;
+	ah->ah_config.spur_immunity_level = 2;
+	ah->ah_config.firstep_level = 0;
+	ah->ah_config.rssi_thr_high = 40;
+	ah->ah_config.rssi_thr_low = 7;
+	ah->ah_config.diversity_control = 0;
+	ah->ah_config.antenna_switch_swap = 0;
+
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		ah->ah_config.spurchans[i][0] = AR_NO_SPUR;
+		ah->ah_config.spurchans[i][1] = AR_NO_SPUR;
+	}
+
+	ah->ah_config.intr_mitigation = 0;
+}
+
+static inline void ath9k_hw_override_ini(struct ath_hal *ah,
+					 struct ath9k_channel *chan)
+{
+	if (!AR_SREV_5416_V20_OR_LATER(ah)
+	    || AR_SREV_9280_10_OR_LATER(ah))
+		return;
+
+	REG_WRITE(ah, 0x9800 + (651 << 2), 0x11);
+}
+
+static inline void ath9k_hw_init_bb(struct ath_hal *ah,
+				    struct ath9k_channel *chan)
+{
+	u32 synthDelay;
+
+	synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
+	if (IS_CHAN_CCK(chan))
+		synthDelay = (4 * synthDelay) / 22;
+	else
+		synthDelay /= 10;
+
+	REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
+
+	udelay(synthDelay + BASE_ACTIVATE_DELAY);
+}
+
+static inline void ath9k_hw_init_interrupt_masks(struct ath_hal *ah,
+						 enum ath9k_opmode opmode)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	ahp->ah_maskReg = AR_IMR_TXERR |
+		AR_IMR_TXURN |
+		AR_IMR_RXERR |
+		AR_IMR_RXORN |
+		AR_IMR_BCNMISC;
+
+	if (ahp->ah_intrMitigation)
+		ahp->ah_maskReg |= AR_IMR_RXINTM | AR_IMR_RXMINTR;
+	else
+		ahp->ah_maskReg |= AR_IMR_RXOK;
+
+	ahp->ah_maskReg |= AR_IMR_TXOK;
+
+	if (opmode == ATH9K_M_HOSTAP)
+		ahp->ah_maskReg |= AR_IMR_MIB;
+
+	REG_WRITE(ah, AR_IMR, ahp->ah_maskReg);
+	REG_WRITE(ah, AR_IMR_S2, REG_READ(ah, AR_IMR_S2) | AR_IMR_S2_GTT);
+
+	if (!AR_SREV_9100(ah)) {
+		REG_WRITE(ah, AR_INTR_SYNC_CAUSE, 0xFFFFFFFF);
+		REG_WRITE(ah, AR_INTR_SYNC_ENABLE, AR_INTR_SYNC_DEFAULT);
+		REG_WRITE(ah, AR_INTR_SYNC_MASK, 0);
+	}
+}
+
+static inline void ath9k_hw_init_qos(struct ath_hal *ah)
+{
+	REG_WRITE(ah, AR_MIC_QOS_CONTROL, 0x100aa);
+	REG_WRITE(ah, AR_MIC_QOS_SELECT, 0x3210);
+
+	REG_WRITE(ah, AR_QOS_NO_ACK,
+		  SM(2, AR_QOS_NO_ACK_TWO_BIT) |
+		  SM(5, AR_QOS_NO_ACK_BIT_OFF) |
+		  SM(0, AR_QOS_NO_ACK_BYTE_OFF));
+
+	REG_WRITE(ah, AR_TXOP_X, AR_TXOP_X_VAL);
+	REG_WRITE(ah, AR_TXOP_0_3, 0xFFFFFFFF);
+	REG_WRITE(ah, AR_TXOP_4_7, 0xFFFFFFFF);
+	REG_WRITE(ah, AR_TXOP_8_11, 0xFFFFFFFF);
+	REG_WRITE(ah, AR_TXOP_12_15, 0xFFFFFFFF);
+}
+
+static void ath9k_hw_analog_shift_rmw(struct ath_hal *ah,
+				      u32 reg,
+				      u32 mask,
+				      u32 shift,
+				      u32 val)
+{
+	u32 regVal;
+
+	regVal = REG_READ(ah, reg) & ~mask;
+	regVal |= (val << shift) & mask;
+
+	REG_WRITE(ah, reg, regVal);
+
+	if (ah->ah_config.analog_shiftreg)
+		udelay(100);
+
+	return;
+}
+
+static u8 ath9k_hw_get_num_ant_config(struct ath_hal_5416 *ahp,
+				      enum ieee80211_band freq_band)
+{
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	struct modal_eep_header *pModal =
+		&(eep->modalHeader[IEEE80211_BAND_5GHZ == freq_band]);
+	struct base_eep_header *pBase = &eep->baseEepHeader;
+	u8 num_ant_config;
+
+	num_ant_config = 1;
+
+	if (pBase->version >= 0x0E0D)
+		if (pModal->useAnt1)
+			num_ant_config += 1;
+
+	return num_ant_config;
+}
+
+static int
+ath9k_hw_get_eeprom_antenna_cfg(struct ath_hal_5416 *ahp,
+				struct ath9k_channel *chan,
+				u8 index,
+				u16 *config)
+{
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	struct modal_eep_header *pModal =
+		&(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
+	struct base_eep_header *pBase = &eep->baseEepHeader;
+
+	switch (index) {
+	case 0:
+		*config = pModal->antCtrlCommon & 0xFFFF;
+		return 0;
+	case 1:
+		if (pBase->version >= 0x0E0D) {
+			if (pModal->useAnt1) {
+				*config =
+				((pModal->antCtrlCommon & 0xFFFF0000) >> 16);
+				return 0;
+			}
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static inline bool ath9k_hw_nvram_read(struct ath_hal *ah,
+				       u32 off,
+				       u16 *data)
+{
+	if (ath9k_hw_use_flash(ah))
+		return ath9k_hw_flash_read(ah, off, data);
+	else
+		return ath9k_hw_eeprom_read(ah, off, data);
+}
+
+static inline bool ath9k_hw_fill_eeprom(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	u16 *eep_data;
+	int addr, ar5416_eep_start_loc = 0;
+
+	if (!ath9k_hw_use_flash(ah)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "%s: Reading from EEPROM, not flash\n", __func__);
+		ar5416_eep_start_loc = 256;
+	}
+	if (AR_SREV_9100(ah))
+		ar5416_eep_start_loc = 256;
+
+	eep_data = (u16 *) eep;
+	for (addr = 0;
+	     addr < sizeof(struct ar5416_eeprom) / sizeof(u16);
+	     addr++) {
+		if (!ath9k_hw_nvram_read(ah, addr + ar5416_eep_start_loc,
+					 eep_data)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+				 "%s: Unable to read eeprom region \n",
+				 __func__);
+			return false;
+		}
+		eep_data++;
+	}
+	return true;
+}
+
+/* XXX: Clean me up, make me more legible */
+static bool
+ath9k_hw_eeprom_set_board_values(struct ath_hal *ah,
+				 struct ath9k_channel *chan)
+{
+	struct modal_eep_header *pModal;
+	int i, regChainOffset;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	u8 txRxAttenLocal;
+	u16 ant_config;
+
+	pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
+
+	txRxAttenLocal = IS_CHAN_2GHZ(chan) ? 23 : 44;
+
+	ath9k_hw_get_eeprom_antenna_cfg(ahp, chan, 1, &ant_config);
+	REG_WRITE(ah, AR_PHY_SWITCH_COM, ant_config);
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		if (AR_SREV_9280(ah)) {
+			if (i >= 2)
+				break;
+		}
+
+		if (AR_SREV_5416_V20_OR_LATER(ah) &&
+		    (ahp->ah_rxchainmask == 5 || ahp->ah_txchainmask == 5)
+		    && (i != 0))
+			regChainOffset = (i == 1) ? 0x2000 : 0x1000;
+		else
+			regChainOffset = i * 0x1000;
+
+		REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset,
+			  pModal->antCtrlChain[i]);
+
+		REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset,
+			  (REG_READ(ah,
+				    AR_PHY_TIMING_CTRL4(0) +
+				    regChainOffset) &
+			   ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
+			     AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
+			  SM(pModal->iqCalICh[i],
+			     AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
+			  SM(pModal->iqCalQCh[i],
+			     AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
+
+		if ((i == 0) || AR_SREV_5416_V20_OR_LATER(ah)) {
+			if ((eep->baseEepHeader.version &
+			     AR5416_EEP_VER_MINOR_MASK) >=
+			    AR5416_EEP_MINOR_VER_3) {
+				txRxAttenLocal = pModal->txRxAttenCh[i];
+				if (AR_SREV_9280_10_OR_LATER(ah)) {
+					REG_RMW_FIELD(ah,
+						AR_PHY_GAIN_2GHZ +
+						regChainOffset,
+						AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN,
+						pModal->
+						bswMargin[i]);
+					REG_RMW_FIELD(ah,
+						AR_PHY_GAIN_2GHZ +
+						regChainOffset,
+						AR_PHY_GAIN_2GHZ_XATTEN1_DB,
+						pModal->
+						bswAtten[i]);
+					REG_RMW_FIELD(ah,
+						AR_PHY_GAIN_2GHZ +
+						regChainOffset,
+						AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
+						pModal->
+						xatten2Margin[i]);
+					REG_RMW_FIELD(ah,
+						AR_PHY_GAIN_2GHZ +
+						regChainOffset,
+						AR_PHY_GAIN_2GHZ_XATTEN2_DB,
+						pModal->
+						xatten2Db[i]);
+				} else {
+					REG_WRITE(ah,
+						  AR_PHY_GAIN_2GHZ +
+						  regChainOffset,
+						  (REG_READ(ah,
+							    AR_PHY_GAIN_2GHZ +
+							    regChainOffset) &
+						   ~AR_PHY_GAIN_2GHZ_BSW_MARGIN)
+						  | SM(pModal->
+						  bswMargin[i],
+						  AR_PHY_GAIN_2GHZ_BSW_MARGIN));
+					REG_WRITE(ah,
+						  AR_PHY_GAIN_2GHZ +
+						  regChainOffset,
+						  (REG_READ(ah,
+							    AR_PHY_GAIN_2GHZ +
+							    regChainOffset) &
+						   ~AR_PHY_GAIN_2GHZ_BSW_ATTEN)
+						  | SM(pModal->bswAtten[i],
+						  AR_PHY_GAIN_2GHZ_BSW_ATTEN));
+				}
+			}
+			if (AR_SREV_9280_10_OR_LATER(ah)) {
+				REG_RMW_FIELD(ah,
+					      AR_PHY_RXGAIN +
+					      regChainOffset,
+					      AR9280_PHY_RXGAIN_TXRX_ATTEN,
+					      txRxAttenLocal);
+				REG_RMW_FIELD(ah,
+					      AR_PHY_RXGAIN +
+					      regChainOffset,
+					      AR9280_PHY_RXGAIN_TXRX_MARGIN,
+					      pModal->rxTxMarginCh[i]);
+			} else {
+				REG_WRITE(ah,
+					  AR_PHY_RXGAIN + regChainOffset,
+					  (REG_READ(ah,
+						    AR_PHY_RXGAIN +
+						    regChainOffset) &
+					   ~AR_PHY_RXGAIN_TXRX_ATTEN) |
+					  SM(txRxAttenLocal,
+					     AR_PHY_RXGAIN_TXRX_ATTEN));
+				REG_WRITE(ah,
+					  AR_PHY_GAIN_2GHZ +
+					  regChainOffset,
+					  (REG_READ(ah,
+						    AR_PHY_GAIN_2GHZ +
+						    regChainOffset) &
+					   ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) |
+					  SM(pModal->rxTxMarginCh[i],
+					     AR_PHY_GAIN_2GHZ_RXTX_MARGIN));
+			}
+		}
+	}
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		if (IS_CHAN_2GHZ(chan)) {
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH0,
+						  AR_AN_RF2G1_CH0_OB,
+						  AR_AN_RF2G1_CH0_OB_S,
+						  pModal->ob);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH0,
+						  AR_AN_RF2G1_CH0_DB,
+						  AR_AN_RF2G1_CH0_DB_S,
+						  pModal->db);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH1,
+						  AR_AN_RF2G1_CH1_OB,
+						  AR_AN_RF2G1_CH1_OB_S,
+						  pModal->ob_ch1);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH1,
+						  AR_AN_RF2G1_CH1_DB,
+						  AR_AN_RF2G1_CH1_DB_S,
+						  pModal->db_ch1);
+		} else {
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH0,
+						  AR_AN_RF5G1_CH0_OB5,
+						  AR_AN_RF5G1_CH0_OB5_S,
+						  pModal->ob);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH0,
+						  AR_AN_RF5G1_CH0_DB5,
+						  AR_AN_RF5G1_CH0_DB5_S,
+						  pModal->db);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH1,
+						  AR_AN_RF5G1_CH1_OB5,
+						  AR_AN_RF5G1_CH1_OB5_S,
+						  pModal->ob_ch1);
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH1,
+						  AR_AN_RF5G1_CH1_DB5,
+						  AR_AN_RF5G1_CH1_DB5_S,
+						  pModal->db_ch1);
+		}
+		ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
+					  AR_AN_TOP2_XPABIAS_LVL,
+					  AR_AN_TOP2_XPABIAS_LVL_S,
+					  pModal->xpaBiasLvl);
+		ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
+					  AR_AN_TOP2_LOCALBIAS,
+					  AR_AN_TOP2_LOCALBIAS_S,
+					  pModal->local_bias);
+		DPRINTF(ah->ah_sc, ATH_DBG_ANY, "ForceXPAon: %d\n",
+			pModal->force_xpaon);
+		REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
+			      pModal->force_xpaon);
+	}
+
+	REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
+		      pModal->switchSettling);
+	REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC,
+		      pModal->adcDesiredSize);
+
+	if (!AR_SREV_9280_10_OR_LATER(ah))
+		REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
+			      AR_PHY_DESIRED_SZ_PGA,
+			      pModal->pgaDesiredSize);
+
+	REG_WRITE(ah, AR_PHY_RF_CTL4,
+		  SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF)
+		  | SM(pModal->txEndToXpaOff,
+		       AR_PHY_RF_CTL4_TX_END_XPAB_OFF)
+		  | SM(pModal->txFrameToXpaOn,
+		       AR_PHY_RF_CTL4_FRAME_XPAA_ON)
+		  | SM(pModal->txFrameToXpaOn,
+		       AR_PHY_RF_CTL4_FRAME_XPAB_ON));
+
+	REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
+		      pModal->txEndToRxOn);
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62,
+			      pModal->thresh62);
+		REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0,
+			      AR_PHY_EXT_CCA0_THRESH62,
+			      pModal->thresh62);
+	} else {
+		REG_RMW_FIELD(ah, AR_PHY_CCA, AR_PHY_CCA_THRESH62,
+			      pModal->thresh62);
+		REG_RMW_FIELD(ah, AR_PHY_EXT_CCA,
+			      AR_PHY_EXT_CCA_THRESH62,
+			      pModal->thresh62);
+	}
+
+	if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+	    AR5416_EEP_MINOR_VER_2) {
+		REG_RMW_FIELD(ah, AR_PHY_RF_CTL2,
+			      AR_PHY_TX_END_DATA_START,
+			      pModal->txFrameToDataStart);
+		REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_END_PA_ON,
+			      pModal->txFrameToPaOn);
+	}
+
+	if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+	    AR5416_EEP_MINOR_VER_3) {
+		if (IS_CHAN_HT40(chan))
+			REG_RMW_FIELD(ah, AR_PHY_SETTLING,
+				      AR_PHY_SETTLING_SWITCH,
+				      pModal->swSettleHt40);
+	}
+
+	return true;
+}
+
+static inline int ath9k_hw_check_eeprom(struct ath_hal *ah)
+{
+	u32 sum = 0, el;
+	u16 *eepdata;
+	int i;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	bool need_swap = false;
+	struct ar5416_eeprom *eep =
+		(struct ar5416_eeprom *) &ahp->ah_eeprom;
+
+	if (!ath9k_hw_use_flash(ah)) {
+		u16 magic, magic2;
+		int addr;
+
+		if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET,
+					&magic)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+				 "%s: Reading Magic # failed\n", __func__);
+			return false;
+		}
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "%s: Read Magic = 0x%04X\n",
+			 __func__, magic);
+
+		if (magic != AR5416_EEPROM_MAGIC) {
+			magic2 = swab16(magic);
+
+			if (magic2 == AR5416_EEPROM_MAGIC) {
+				need_swap = true;
+				eepdata = (u16 *) (&ahp->ah_eeprom);
+
+				for (addr = 0;
+				     addr <
+					     sizeof(struct ar5416_eeprom) /
+					     sizeof(u16); addr++) {
+					u16 temp;
+
+					temp = swab16(*eepdata);
+					*eepdata = temp;
+					eepdata++;
+
+					DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+						 "0x%04X  ", *eepdata);
+					if (((addr + 1) % 6) == 0)
+						DPRINTF(ah->ah_sc,
+							 ATH_DBG_EEPROM,
+							 "\n");
+				}
+			} else {
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+					 "Invalid EEPROM Magic. "
+					"endianness missmatch.\n");
+				return -EINVAL;
+			}
+		}
+	}
+	DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n",
+		 need_swap ? "True" : "False");
+
+	if (need_swap)
+		el = swab16(ahp->ah_eeprom.baseEepHeader.length);
+	else
+		el = ahp->ah_eeprom.baseEepHeader.length;
+
+	if (el > sizeof(struct ar5416_eeprom))
+		el = sizeof(struct ar5416_eeprom) / sizeof(u16);
+	else
+		el = el / sizeof(u16);
+
+	eepdata = (u16 *) (&ahp->ah_eeprom);
+
+	for (i = 0; i < el; i++)
+		sum ^= *eepdata++;
+
+	if (need_swap) {
+		u32 integer, j;
+		u16 word;
+
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "EEPROM Endianness is not native.. Changing \n");
+
+		word = swab16(eep->baseEepHeader.length);
+		eep->baseEepHeader.length = word;
+
+		word = swab16(eep->baseEepHeader.checksum);
+		eep->baseEepHeader.checksum = word;
+
+		word = swab16(eep->baseEepHeader.version);
+		eep->baseEepHeader.version = word;
+
+		word = swab16(eep->baseEepHeader.regDmn[0]);
+		eep->baseEepHeader.regDmn[0] = word;
+
+		word = swab16(eep->baseEepHeader.regDmn[1]);
+		eep->baseEepHeader.regDmn[1] = word;
+
+		word = swab16(eep->baseEepHeader.rfSilent);
+		eep->baseEepHeader.rfSilent = word;
+
+		word = swab16(eep->baseEepHeader.blueToothOptions);
+		eep->baseEepHeader.blueToothOptions = word;
+
+		word = swab16(eep->baseEepHeader.deviceCap);
+		eep->baseEepHeader.deviceCap = word;
+
+		for (j = 0; j < ARRAY_SIZE(eep->modalHeader); j++) {
+			struct modal_eep_header *pModal =
+				&eep->modalHeader[j];
+			integer = swab32(pModal->antCtrlCommon);
+			pModal->antCtrlCommon = integer;
+
+			for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+				integer = swab32(pModal->antCtrlChain[i]);
+				pModal->antCtrlChain[i] = integer;
+			}
+
+			for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
+				word = swab16(pModal->spurChans[i].spurChan);
+				pModal->spurChans[i].spurChan = word;
+			}
+		}
+	}
+
+	if (sum != 0xffff || ar5416_get_eep_ver(ahp) != AR5416_EEP_VER ||
+	    ar5416_get_eep_rev(ahp) < AR5416_EEP_NO_BACK_VER) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+			 sum, ar5416_get_eep_ver(ahp));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static bool ath9k_hw_chip_test(struct ath_hal *ah)
+{
+	u32 regAddr[2] = { AR_STA_ID0, AR_PHY_BASE + (8 << 2) };
+	u32 regHold[2];
+	u32 patternData[4] = { 0x55555555,
+				     0xaaaaaaaa,
+				     0x66666666,
+				     0x99999999 };
+	int i, j;
+
+	for (i = 0; i < 2; i++) {
+		u32 addr = regAddr[i];
+		u32 wrData, rdData;
+
+		regHold[i] = REG_READ(ah, addr);
+		for (j = 0; j < 0x100; j++) {
+			wrData = (j << 16) | j;
+			REG_WRITE(ah, addr, wrData);
+			rdData = REG_READ(ah, addr);
+			if (rdData != wrData) {
+				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				 "%s: address test failed "
+				"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
+				 __func__, addr, wrData, rdData);
+				return false;
+			}
+		}
+		for (j = 0; j < 4; j++) {
+			wrData = patternData[j];
+			REG_WRITE(ah, addr, wrData);
+			rdData = REG_READ(ah, addr);
+			if (wrData != rdData) {
+				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				 "%s: address test failed "
+				"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
+				 __func__, addr, wrData, rdData);
+				return false;
+			}
+		}
+		REG_WRITE(ah, regAddr[i], regHold[i]);
+	}
+	udelay(100);
+	return true;
+}
+
+u32 ath9k_hw_getrxfilter(struct ath_hal *ah)
+{
+	u32 bits = REG_READ(ah, AR_RX_FILTER);
+	u32 phybits = REG_READ(ah, AR_PHY_ERR);
+
+	if (phybits & AR_PHY_ERR_RADAR)
+		bits |= ATH9K_RX_FILTER_PHYRADAR;
+	if (phybits & (AR_PHY_ERR_OFDM_TIMING | AR_PHY_ERR_CCK_TIMING))
+		bits |= ATH9K_RX_FILTER_PHYERR;
+	return bits;
+}
+
+void ath9k_hw_setrxfilter(struct ath_hal *ah, u32 bits)
+{
+	u32 phybits;
+
+	REG_WRITE(ah, AR_RX_FILTER, (bits & 0xffff) | AR_RX_COMPR_BAR);
+	phybits = 0;
+	if (bits & ATH9K_RX_FILTER_PHYRADAR)
+		phybits |= AR_PHY_ERR_RADAR;
+	if (bits & ATH9K_RX_FILTER_PHYERR)
+		phybits |= AR_PHY_ERR_OFDM_TIMING | AR_PHY_ERR_CCK_TIMING;
+	REG_WRITE(ah, AR_PHY_ERR, phybits);
+
+	if (phybits)
+		REG_WRITE(ah, AR_RXCFG,
+			  REG_READ(ah, AR_RXCFG) | AR_RXCFG_ZLFDMA);
+	else
+		REG_WRITE(ah, AR_RXCFG,
+			  REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_ZLFDMA);
+}
+
+bool ath9k_hw_setcapability(struct ath_hal *ah,
+			    enum ath9k_capability_type type,
+			    u32 capability,
+			    u32 setting,
+			    int *status)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 v;
+
+	switch (type) {
+	case ATH9K_CAP_TKIP_MIC:
+		if (setting)
+			ahp->ah_staId1Defaults |=
+				AR_STA_ID1_CRPT_MIC_ENABLE;
+		else
+			ahp->ah_staId1Defaults &=
+				~AR_STA_ID1_CRPT_MIC_ENABLE;
+		return true;
+	case ATH9K_CAP_DIVERSITY:
+		v = REG_READ(ah, AR_PHY_CCK_DETECT);
+		if (setting)
+			v |= AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
+		else
+			v &= ~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
+		REG_WRITE(ah, AR_PHY_CCK_DETECT, v);
+		return true;
+	case ATH9K_CAP_MCAST_KEYSRCH:
+		if (setting)
+			ahp->ah_staId1Defaults |= AR_STA_ID1_MCAST_KSRCH;
+		else
+			ahp->ah_staId1Defaults &= ~AR_STA_ID1_MCAST_KSRCH;
+		return true;
+	case ATH9K_CAP_TSF_ADJUST:
+		if (setting)
+			ahp->ah_miscMode |= AR_PCU_TX_ADD_TSF;
+		else
+			ahp->ah_miscMode &= ~AR_PCU_TX_ADD_TSF;
+		return true;
+	default:
+		return false;
+	}
+}
+
+void ath9k_hw_dmaRegDump(struct ath_hal *ah)
+{
+	u32 val[ATH9K_NUM_DMA_DEBUG_REGS];
+	int qcuOffset = 0, dcuOffset = 0;
+	u32 *qcuBase = &val[0], *dcuBase = &val[4];
+	int i;
+
+	REG_WRITE(ah, AR_MACMISC,
+		  ((AR_MACMISC_DMA_OBS_LINE_8 << AR_MACMISC_DMA_OBS_S) |
+		   (AR_MACMISC_MISC_OBS_BUS_1 <<
+		    AR_MACMISC_MISC_OBS_BUS_MSB_S)));
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "Raw DMA Debug values:\n");
+	for (i = 0; i < ATH9K_NUM_DMA_DEBUG_REGS; i++) {
+		if (i % 4 == 0)
+			DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "\n");
+
+		val[i] = REG_READ(ah, AR_DMADBG_0 + (i * sizeof(u32)));
+		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "%d: %08x ", i, val[i]);
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "\n\n");
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "Num QCU: chain_st fsp_ok fsp_st DCU: chain_st\n");
+
+	for (i = 0; i < ATH9K_NUM_QUEUES;
+	     i++, qcuOffset += 4, dcuOffset += 5) {
+		if (i == 8) {
+			qcuOffset = 0;
+			qcuBase++;
+		}
+
+		if (i == 6) {
+			dcuOffset = 0;
+			dcuBase++;
+		}
+
+		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+			 "%2d          %2x      %1x     %2x           %2x\n",
+			 i, (*qcuBase & (0x7 << qcuOffset)) >> qcuOffset,
+			 (*qcuBase & (0x8 << qcuOffset)) >> (qcuOffset +
+							     3),
+			 val[2] & (0x7 << (i * 3)) >> (i * 3),
+			 (*dcuBase & (0x1f << dcuOffset)) >> dcuOffset);
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "\n");
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "qcu_stitch state:   %2x    qcu_fetch state:        %2x\n",
+		 (val[3] & 0x003c0000) >> 18, (val[3] & 0x03c00000) >> 22);
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "qcu_complete state: %2x    dcu_complete state:     %2x\n",
+		 (val[3] & 0x1c000000) >> 26, (val[6] & 0x3));
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "dcu_arb state:      %2x    dcu_fp state:           %2x\n",
+		 (val[5] & 0x06000000) >> 25, (val[5] & 0x38000000) >> 27);
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "chan_idle_dur:     %3d    chan_idle_dur_valid:     %1d\n",
+		 (val[6] & 0x000003fc) >> 2, (val[6] & 0x00000400) >> 10);
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "txfifo_valid_0:      %1d    txfifo_valid_1:          %1d\n",
+		 (val[6] & 0x00000800) >> 11, (val[6] & 0x00001000) >> 12);
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		 "txfifo_dcu_num_0:   %2d    txfifo_dcu_num_1:       %2d\n",
+		 (val[6] & 0x0001e000) >> 13, (val[6] & 0x001e0000) >> 17);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO, "pcu observe 0x%x \n",
+		REG_READ(ah, AR_OBS_BUS_1));
+	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		"AR_CR 0x%x \n", REG_READ(ah, AR_CR));
+}
+
+u32 ath9k_hw_GetMibCycleCountsPct(struct ath_hal *ah,
+					u32 *rxc_pcnt,
+					u32 *rxf_pcnt,
+					u32 *txf_pcnt)
+{
+	static u32 cycles, rx_clear, rx_frame, tx_frame;
+	u32 good = 1;
+
+	u32 rc = REG_READ(ah, AR_RCCNT);
+	u32 rf = REG_READ(ah, AR_RFCNT);
+	u32 tf = REG_READ(ah, AR_TFCNT);
+	u32 cc = REG_READ(ah, AR_CCCNT);
+
+	if (cycles == 0 || cycles > cc) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: cycle counter wrap. ExtBusy = 0\n",
+			 __func__);
+		good = 0;
+	} else {
+		u32 cc_d = cc - cycles;
+		u32 rc_d = rc - rx_clear;
+		u32 rf_d = rf - rx_frame;
+		u32 tf_d = tf - tx_frame;
+
+		if (cc_d != 0) {
+			*rxc_pcnt = rc_d * 100 / cc_d;
+			*rxf_pcnt = rf_d * 100 / cc_d;
+			*txf_pcnt = tf_d * 100 / cc_d;
+		} else {
+			good = 0;
+		}
+	}
+
+	cycles = cc;
+	rx_frame = rf;
+	rx_clear = rc;
+	tx_frame = tf;
+
+	return good;
+}
+
+void ath9k_hw_set11nmac2040(struct ath_hal *ah, enum ath9k_ht_macmode mode)
+{
+	u32 macmode;
+
+	if (mode == ATH9K_HT_MACMODE_2040 &&
+	    !ah->ah_config.cwm_ignore_extcca)
+		macmode = AR_2040_JOINED_RX_CLEAR;
+	else
+		macmode = 0;
+
+	REG_WRITE(ah, AR_2040_MODE, macmode);
+}
+
+static void ath9k_hw_mark_phy_inactive(struct ath_hal *ah)
+{
+	REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
+}
+
+
+static struct ath_hal_5416 *ath9k_hw_newstate(u16 devid,
+					      struct ath_softc *sc,
+					      void __iomem *mem,
+					      int *status)
+{
+	static const u8 defbssidmask[ETH_ALEN] =
+		{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+	struct ath_hal_5416 *ahp;
+	struct ath_hal *ah;
+
+	ahp = kzalloc(sizeof(struct ath_hal_5416), GFP_KERNEL);
+	if (ahp == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			 "%s: cannot allocate memory for state block\n",
+			 __func__);
+		*status = -ENOMEM;
+		return NULL;
+	}
+
+	ah = &ahp->ah;
+
+	memcpy(&ahp->ah, &ar5416hal, sizeof(struct ath_hal));
+
+	ah->ah_sc = sc;
+	ah->ah_sh = mem;
+
+	ah->ah_devid = devid;
+	ah->ah_subvendorid = 0;
+
+	ah->ah_flags = 0;
+	if ((devid == AR5416_AR9100_DEVID))
+		ah->ah_macVersion = AR_SREV_VERSION_9100;
+	if (!AR_SREV_9100(ah))
+		ah->ah_flags = AH_USE_EEPROM;
+
+	ah->ah_powerLimit = MAX_RATE_POWER;
+	ah->ah_tpScale = ATH9K_TP_SCALE_MAX;
+
+	ahp->ah_atimWindow = 0;
+	ahp->ah_diversityControl = ah->ah_config.diversity_control;
+	ahp->ah_antennaSwitchSwap =
+		ah->ah_config.antenna_switch_swap;
+
+	ahp->ah_staId1Defaults = AR_STA_ID1_CRPT_MIC_ENABLE;
+	ahp->ah_beaconInterval = 100;
+	ahp->ah_enable32kHzClock = DONT_USE_32KHZ;
+	ahp->ah_slottime = (u32) -1;
+	ahp->ah_acktimeout = (u32) -1;
+	ahp->ah_ctstimeout = (u32) -1;
+	ahp->ah_globaltxtimeout = (u32) -1;
+	memcpy(&ahp->ah_bssidmask, defbssidmask, ETH_ALEN);
+
+	ahp->ah_gBeaconRate = 0;
+
+	return ahp;
+}
+
+static int ath9k_hw_eeprom_attach(struct ath_hal *ah)
+{
+	int status;
+
+	if (ath9k_hw_use_flash(ah))
+		ath9k_hw_flash_map(ah);
+
+	if (!ath9k_hw_fill_eeprom(ah))
+		return -EIO;
+
+	status = ath9k_hw_check_eeprom(ah);
+
+	return status;
+}
+
+u32 ath9k_hw_get_eeprom(struct ath_hal_5416 *ahp,
+			      enum eeprom_param param)
+{
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	struct modal_eep_header *pModal = eep->modalHeader;
+	struct base_eep_header *pBase = &eep->baseEepHeader;
+
+	switch (param) {
+	case EEP_NFTHRESH_5:
+		return -pModal[0].noiseFloorThreshCh[0];
+	case EEP_NFTHRESH_2:
+		return -pModal[1].noiseFloorThreshCh[0];
+	case AR_EEPROM_MAC(0):
+		return pBase->macAddr[0] << 8 | pBase->macAddr[1];
+	case AR_EEPROM_MAC(1):
+		return pBase->macAddr[2] << 8 | pBase->macAddr[3];
+	case AR_EEPROM_MAC(2):
+		return pBase->macAddr[4] << 8 | pBase->macAddr[5];
+	case EEP_REG_0:
+		return pBase->regDmn[0];
+	case EEP_REG_1:
+		return pBase->regDmn[1];
+	case EEP_OP_CAP:
+		return pBase->deviceCap;
+	case EEP_OP_MODE:
+		return pBase->opCapFlags;
+	case EEP_RF_SILENT:
+		return pBase->rfSilent;
+	case EEP_OB_5:
+		return pModal[0].ob;
+	case EEP_DB_5:
+		return pModal[0].db;
+	case EEP_OB_2:
+		return pModal[1].ob;
+	case EEP_DB_2:
+		return pModal[1].db;
+	case EEP_MINOR_REV:
+		return pBase->version & AR5416_EEP_VER_MINOR_MASK;
+	case EEP_TX_MASK:
+		return pBase->txMask;
+	case EEP_RX_MASK:
+		return pBase->rxMask;
+	default:
+		return 0;
+	}
+}
+
+static inline int ath9k_hw_get_radiorev(struct ath_hal *ah)
+{
+	u32 val;
+	int i;
+
+	REG_WRITE(ah, AR_PHY(0x36), 0x00007058);
+	for (i = 0; i < 8; i++)
+		REG_WRITE(ah, AR_PHY(0x20), 0x00010000);
+	val = (REG_READ(ah, AR_PHY(256)) >> 24) & 0xff;
+	val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4);
+	return ath9k_hw_reverse_bits(val, 8);
+}
+
+static inline int ath9k_hw_init_macaddr(struct ath_hal *ah)
+{
+	u32 sum;
+	int i;
+	u16 eeval;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	DECLARE_MAC_BUF(mac);
+
+	sum = 0;
+	for (i = 0; i < 3; i++) {
+		eeval = ath9k_hw_get_eeprom(ahp, AR_EEPROM_MAC(i));
+		sum += eeval;
+		ahp->ah_macaddr[2 * i] = eeval >> 8;
+		ahp->ah_macaddr[2 * i + 1] = eeval & 0xff;
+	}
+	if (sum == 0 || sum == 0xffff * 3) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "%s: mac address read failed: %s\n", __func__,
+			 print_mac(mac, ahp->ah_macaddr));
+		return -EADDRNOTAVAIL;
+	}
+
+	return 0;
+}
+
+static inline int16_t ath9k_hw_interpolate(u16 target,
+					   u16 srcLeft,
+					   u16 srcRight,
+					   int16_t targetLeft,
+					   int16_t targetRight)
+{
+	int16_t rv;
+
+	if (srcRight == srcLeft) {
+		rv = targetLeft;
+	} else {
+		rv = (int16_t) (((target - srcLeft) * targetRight +
+				 (srcRight - target) * targetLeft) /
+				(srcRight - srcLeft));
+	}
+	return rv;
+}
+
+static inline u16 ath9k_hw_fbin2freq(u8 fbin,
+					   bool is2GHz)
+{
+
+	if (fbin == AR5416_BCHAN_UNUSED)
+		return fbin;
+
+	return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin));
+}
+
+static u16 ath9k_hw_eeprom_get_spur_chan(struct ath_hal *ah,
+					       u16 i,
+					       bool is2GHz)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416_eeprom *eep =
+		(struct ar5416_eeprom *) &ahp->ah_eeprom;
+	u16 spur_val = AR_NO_SPUR;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+		 "Getting spur idx %d is2Ghz. %d val %x\n",
+		 i, is2GHz, ah->ah_config.spurchans[i][is2GHz]);
+
+	switch (ah->ah_config.spurmode) {
+	case SPUR_DISABLE:
+		break;
+	case SPUR_ENABLE_IOCTL:
+		spur_val = ah->ah_config.spurchans[i][is2GHz];
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+			 "Getting spur val from new loc. %d\n", spur_val);
+		break;
+	case SPUR_ENABLE_EEPROM:
+		spur_val = eep->modalHeader[is2GHz].spurChans[i].spurChan;
+		break;
+
+	}
+	return spur_val;
+}
+
+static inline int ath9k_hw_rfattach(struct ath_hal *ah)
+{
+	bool rfStatus = false;
+	int ecode = 0;
+
+	rfStatus = ath9k_hw_init_rf(ah, &ecode);
+	if (!rfStatus) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			 "%s: RF setup failed, status %u\n", __func__,
+			 ecode);
+		return ecode;
+	}
+
+	return 0;
+}
+
+static int ath9k_hw_rf_claim(struct ath_hal *ah)
+{
+	u32 val;
+
+	REG_WRITE(ah, AR_PHY(0), 0x00000007);
+
+	val = ath9k_hw_get_radiorev(ah);
+	switch (val & AR_RADIO_SREV_MAJOR) {
+	case 0:
+		val = AR_RAD5133_SREV_MAJOR;
+		break;
+	case AR_RAD5133_SREV_MAJOR:
+	case AR_RAD5122_SREV_MAJOR:
+	case AR_RAD2133_SREV_MAJOR:
+	case AR_RAD2122_SREV_MAJOR:
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: 5G Radio Chip Rev 0x%02X is not "
+			"supported by this driver\n",
+			 __func__, ah->ah_analog5GhzRev);
+		return -EOPNOTSUPP;
+	}
+
+	ah->ah_analog5GhzRev = val;
+
+	return 0;
+}
+
+static inline void ath9k_hw_init_pll(struct ath_hal *ah,
+				     struct ath9k_channel *chan)
+{
+	u32 pll;
+
+	if (AR_SREV_9100(ah)) {
+		if (chan && IS_CHAN_5GHZ(chan))
+			pll = 0x1450;
+		else
+			pll = 0x1458;
+	} else {
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			pll = SM(0x5, AR_RTC_9160_PLL_REFDIV);
+
+			if (chan && IS_CHAN_HALF_RATE(chan))
+				pll |= SM(0x1, AR_RTC_9160_PLL_CLKSEL);
+			else if (chan && IS_CHAN_QUARTER_RATE(chan))
+				pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL);
+
+			if (chan && IS_CHAN_5GHZ(chan)) {
+				pll |= SM(0x28, AR_RTC_9160_PLL_DIV);
+
+
+				if (AR_SREV_9280_20(ah)) {
+					if (((chan->channel % 20) == 0)
+					    || ((chan->channel % 10) == 0))
+						pll = 0x2850;
+					else
+						pll = 0x142c;
+				}
+			} else {
+				pll |= SM(0x2c, AR_RTC_9160_PLL_DIV);
+			}
+
+		} else if (AR_SREV_9160_10_OR_LATER(ah)) {
+
+			pll = SM(0x5, AR_RTC_9160_PLL_REFDIV);
+
+			if (chan && IS_CHAN_HALF_RATE(chan))
+				pll |= SM(0x1, AR_RTC_9160_PLL_CLKSEL);
+			else if (chan && IS_CHAN_QUARTER_RATE(chan))
+				pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL);
+
+			if (chan && IS_CHAN_5GHZ(chan))
+				pll |= SM(0x50, AR_RTC_9160_PLL_DIV);
+			else
+				pll |= SM(0x58, AR_RTC_9160_PLL_DIV);
+		} else {
+			pll = AR_RTC_PLL_REFDIV_5 | AR_RTC_PLL_DIV2;
+
+			if (chan && IS_CHAN_HALF_RATE(chan))
+				pll |= SM(0x1, AR_RTC_PLL_CLKSEL);
+			else if (chan && IS_CHAN_QUARTER_RATE(chan))
+				pll |= SM(0x2, AR_RTC_PLL_CLKSEL);
+
+			if (chan && IS_CHAN_5GHZ(chan))
+				pll |= SM(0xa, AR_RTC_PLL_DIV);
+			else
+				pll |= SM(0xb, AR_RTC_PLL_DIV);
+		}
+	}
+	REG_WRITE(ah, (u16) (AR_RTC_PLL_CONTROL), pll);
+
+	udelay(RTC_PLL_SETTLE_DELAY);
+
+	REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
+}
+
+static void ath9k_hw_set_regs(struct ath_hal *ah, struct ath9k_channel *chan,
+			      enum ath9k_ht_macmode macmode)
+{
+	u32 phymode;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	phymode = AR_PHY_FC_HT_EN | AR_PHY_FC_SHORT_GI_40
+		| AR_PHY_FC_SINGLE_HT_LTF1 | AR_PHY_FC_WALSH;
+
+	if (IS_CHAN_HT40(chan)) {
+		phymode |= AR_PHY_FC_DYN2040_EN;
+
+		if ((chan->chanmode == CHANNEL_A_HT40PLUS) ||
+		    (chan->chanmode == CHANNEL_G_HT40PLUS))
+			phymode |= AR_PHY_FC_DYN2040_PRI_CH;
+
+		if (ahp->ah_extprotspacing == ATH9K_HT_EXTPROTSPACING_25)
+			phymode |= AR_PHY_FC_DYN2040_EXT_CH;
+	}
+	REG_WRITE(ah, AR_PHY_TURBO, phymode);
+
+	ath9k_hw_set11nmac2040(ah, macmode);
+
+	REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
+	REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
+}
+
+static void ath9k_hw_set_operating_mode(struct ath_hal *ah, int opmode)
+{
+	u32 val;
+
+	val = REG_READ(ah, AR_STA_ID1);
+	val &= ~(AR_STA_ID1_STA_AP | AR_STA_ID1_ADHOC);
+	switch (opmode) {
+	case ATH9K_M_HOSTAP:
+		REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_STA_AP
+			  | AR_STA_ID1_KSRCH_MODE);
+		REG_CLR_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
+		break;
+	case ATH9K_M_IBSS:
+		REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_ADHOC
+			  | AR_STA_ID1_KSRCH_MODE);
+		REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
+		break;
+	case ATH9K_M_STA:
+	case ATH9K_M_MONITOR:
+		REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
+		break;
+	}
+}
+
+static inline void
+ath9k_hw_set_rfmode(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	u32 rfMode = 0;
+
+	if (chan == NULL)
+		return;
+
+	rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan))
+		? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM;
+
+	if (!AR_SREV_9280_10_OR_LATER(ah))
+		rfMode |= (IS_CHAN_5GHZ(chan)) ? AR_PHY_MODE_RF5GHZ :
+			AR_PHY_MODE_RF2GHZ;
+
+	if (AR_SREV_9280_20(ah) && IS_CHAN_A_5MHZ_SPACED(chan))
+		rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
+
+	REG_WRITE(ah, AR_PHY_MODE, rfMode);
+}
+
+static bool ath9k_hw_set_reset(struct ath_hal *ah, int type)
+{
+	u32 rst_flags;
+	u32 tmpReg;
+
+	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN |
+		  AR_RTC_FORCE_WAKE_ON_INT);
+
+	if (AR_SREV_9100(ah)) {
+		rst_flags = AR_RTC_RC_MAC_WARM | AR_RTC_RC_MAC_COLD |
+			AR_RTC_RC_COLD_RESET | AR_RTC_RC_WARM_RESET;
+	} else {
+		tmpReg = REG_READ(ah, AR_INTR_SYNC_CAUSE);
+		if (tmpReg &
+		    (AR_INTR_SYNC_LOCAL_TIMEOUT |
+		     AR_INTR_SYNC_RADM_CPL_TIMEOUT)) {
+			REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
+			REG_WRITE(ah, AR_RC, AR_RC_AHB | AR_RC_HOSTIF);
+		} else {
+			REG_WRITE(ah, AR_RC, AR_RC_AHB);
+		}
+
+		rst_flags = AR_RTC_RC_MAC_WARM;
+		if (type == ATH9K_RESET_COLD)
+			rst_flags |= AR_RTC_RC_MAC_COLD;
+	}
+
+	REG_WRITE(ah, (u16) (AR_RTC_RC), rst_flags);
+	udelay(50);
+
+	REG_WRITE(ah, (u16) (AR_RTC_RC), 0);
+	if (!ath9k_hw_wait(ah, (u16) (AR_RTC_RC), AR_RTC_RC_M, 0)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			"%s: RTC stuck in MAC reset\n",
+			__func__);
+		return false;
+	}
+
+	if (!AR_SREV_9100(ah))
+		REG_WRITE(ah, AR_RC, 0);
+
+	ath9k_hw_init_pll(ah, NULL);
+
+	if (AR_SREV_9100(ah))
+		udelay(50);
+
+	return true;
+}
+
+static inline bool ath9k_hw_set_reset_power_on(struct ath_hal *ah)
+{
+	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN |
+		  AR_RTC_FORCE_WAKE_ON_INT);
+
+	REG_WRITE(ah, (u16) (AR_RTC_RESET), 0);
+	REG_WRITE(ah, (u16) (AR_RTC_RESET), 1);
+
+	if (!ath9k_hw_wait(ah,
+			   AR_RTC_STATUS,
+			   AR_RTC_STATUS_M,
+			   AR_RTC_STATUS_ON)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: RTC not waking up\n",
+			 __func__);
+		return false;
+	}
+
+	ath9k_hw_read_revisions(ah);
+
+	return ath9k_hw_set_reset(ah, ATH9K_RESET_WARM);
+}
+
+static bool ath9k_hw_set_reset_reg(struct ath_hal *ah,
+				   u32 type)
+{
+	REG_WRITE(ah, AR_RTC_FORCE_WAKE,
+		  AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT);
+
+	switch (type) {
+	case ATH9K_RESET_POWER_ON:
+		return ath9k_hw_set_reset_power_on(ah);
+		break;
+	case ATH9K_RESET_WARM:
+	case ATH9K_RESET_COLD:
+		return ath9k_hw_set_reset(ah, type);
+		break;
+	default:
+		return false;
+	}
+}
+
+static inline
+struct ath9k_channel *ath9k_hw_check_chan(struct ath_hal *ah,
+					  struct ath9k_channel *chan)
+{
+	if (!(IS_CHAN_2GHZ(chan) ^ IS_CHAN_5GHZ(chan))) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: invalid channel %u/0x%x; not marked as "
+			 "2GHz or 5GHz\n", __func__, chan->channel,
+			 chan->channelFlags);
+		return NULL;
+	}
+
+	if (!IS_CHAN_OFDM(chan) &&
+	      !IS_CHAN_CCK(chan) &&
+	      !IS_CHAN_HT20(chan) &&
+	      !IS_CHAN_HT40(chan)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			"%s: invalid channel %u/0x%x; not marked as "
+			"OFDM or CCK or HT20 or HT40PLUS or HT40MINUS\n",
+			__func__, chan->channel, chan->channelFlags);
+		return NULL;
+	}
+
+	return ath9k_regd_check_channel(ah, chan);
+}
+
+static inline bool
+ath9k_hw_get_lower_upper_index(u8 target,
+			       u8 *pList,
+			       u16 listSize,
+			       u16 *indexL,
+			       u16 *indexR)
+{
+	u16 i;
+
+	if (target <= pList[0]) {
+		*indexL = *indexR = 0;
+		return true;
+	}
+	if (target >= pList[listSize - 1]) {
+		*indexL = *indexR = (u16) (listSize - 1);
+		return true;
+	}
+
+	for (i = 0; i < listSize - 1; i++) {
+		if (pList[i] == target) {
+			*indexL = *indexR = i;
+			return true;
+		}
+		if (target < pList[i + 1]) {
+			*indexL = i;
+			*indexR = (u16) (i + 1);
+			return false;
+		}
+	}
+	return false;
+}
+
+static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer)
+{
+	int16_t nfval;
+	int16_t sort[ATH9K_NF_CAL_HIST_MAX];
+	int i, j;
+
+	for (i = 0; i < ATH9K_NF_CAL_HIST_MAX; i++)
+		sort[i] = nfCalBuffer[i];
+
+	for (i = 0; i < ATH9K_NF_CAL_HIST_MAX - 1; i++) {
+		for (j = 1; j < ATH9K_NF_CAL_HIST_MAX - i; j++) {
+			if (sort[j] > sort[j - 1]) {
+				nfval = sort[j];
+				sort[j] = sort[j - 1];
+				sort[j - 1] = nfval;
+			}
+		}
+	}
+	nfval = sort[(ATH9K_NF_CAL_HIST_MAX - 1) >> 1];
+
+	return nfval;
+}
+
+static void ath9k_hw_update_nfcal_hist_buffer(struct ath9k_nfcal_hist *h,
+					      int16_t *nfarray)
+{
+	int i;
+
+	for (i = 0; i < NUM_NF_READINGS; i++) {
+		h[i].nfCalBuffer[h[i].currIndex] = nfarray[i];
+
+		if (++h[i].currIndex >= ATH9K_NF_CAL_HIST_MAX)
+			h[i].currIndex = 0;
+
+		if (h[i].invalidNFcount > 0) {
+			if (nfarray[i] < AR_PHY_CCA_MIN_BAD_VALUE
+			    || nfarray[i] > AR_PHY_CCA_MAX_HIGH_VALUE) {
+				h[i].invalidNFcount = ATH9K_NF_CAL_HIST_MAX;
+			} else {
+				h[i].invalidNFcount--;
+				h[i].privNF = nfarray[i];
+			}
+		} else {
+			h[i].privNF =
+				ath9k_hw_get_nf_hist_mid(h[i].nfCalBuffer);
+		}
+	}
+	return;
+}
+
+static void ar5416GetNoiseFloor(struct ath_hal *ah,
+				int16_t nfarray[NUM_NF_READINGS])
+{
+	int16_t nf;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		nf = MS(REG_READ(ah, AR_PHY_CCA), AR9280_PHY_MINCCA_PWR);
+	else
+		nf = MS(REG_READ(ah, AR_PHY_CCA), AR_PHY_MINCCA_PWR);
+
+	if (nf & 0x100)
+		nf = 0 - ((nf ^ 0x1ff) + 1);
+	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+		 "NF calibrated [ctl] [chain 0] is %d\n", nf);
+	nfarray[0] = nf;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		nf = MS(REG_READ(ah, AR_PHY_CH1_CCA),
+			AR9280_PHY_CH1_MINCCA_PWR);
+	else
+		nf = MS(REG_READ(ah, AR_PHY_CH1_CCA),
+			AR_PHY_CH1_MINCCA_PWR);
+
+	if (nf & 0x100)
+		nf = 0 - ((nf ^ 0x1ff) + 1);
+	DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL,
+		 "NF calibrated [ctl] [chain 1] is %d\n", nf);
+	nfarray[1] = nf;
+
+	if (!AR_SREV_9280(ah)) {
+		nf = MS(REG_READ(ah, AR_PHY_CH2_CCA),
+			AR_PHY_CH2_MINCCA_PWR);
+		if (nf & 0x100)
+			nf = 0 - ((nf ^ 0x1ff) + 1);
+		DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL,
+			 "NF calibrated [ctl] [chain 2] is %d\n", nf);
+		nfarray[2] = nf;
+	}
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		nf = MS(REG_READ(ah, AR_PHY_EXT_CCA),
+			AR9280_PHY_EXT_MINCCA_PWR);
+	else
+		nf = MS(REG_READ(ah, AR_PHY_EXT_CCA),
+			AR_PHY_EXT_MINCCA_PWR);
+
+	if (nf & 0x100)
+		nf = 0 - ((nf ^ 0x1ff) + 1);
+	DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL,
+		 "NF calibrated [ext] [chain 0] is %d\n", nf);
+	nfarray[3] = nf;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA),
+			AR9280_PHY_CH1_EXT_MINCCA_PWR);
+	else
+		nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA),
+			AR_PHY_CH1_EXT_MINCCA_PWR);
+
+	if (nf & 0x100)
+		nf = 0 - ((nf ^ 0x1ff) + 1);
+	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+		 "NF calibrated [ext] [chain 1] is %d\n", nf);
+	nfarray[4] = nf;
+
+	if (!AR_SREV_9280(ah)) {
+		nf = MS(REG_READ(ah, AR_PHY_CH2_EXT_CCA),
+			AR_PHY_CH2_EXT_MINCCA_PWR);
+		if (nf & 0x100)
+			nf = 0 - ((nf ^ 0x1ff) + 1);
+		DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL,
+			 "NF calibrated [ext] [chain 2] is %d\n", nf);
+		nfarray[5] = nf;
+	}
+}
+
+static bool
+getNoiseFloorThresh(struct ath_hal *ah,
+		    const struct ath9k_channel *chan,
+		    int16_t *nft)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	switch (chan->chanmode) {
+	case CHANNEL_A:
+	case CHANNEL_A_HT20:
+	case CHANNEL_A_HT40PLUS:
+	case CHANNEL_A_HT40MINUS:
+		*nft = (int16_t) ath9k_hw_get_eeprom(ahp, EEP_NFTHRESH_5);
+		break;
+	case CHANNEL_B:
+	case CHANNEL_G:
+	case CHANNEL_G_HT20:
+	case CHANNEL_G_HT40PLUS:
+	case CHANNEL_G_HT40MINUS:
+		*nft = (int16_t) ath9k_hw_get_eeprom(ahp, EEP_NFTHRESH_2);
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: invalid channel flags 0x%x\n", __func__,
+			 chan->channelFlags);
+		return false;
+	}
+	return true;
+}
+
+static void ath9k_hw_start_nfcal(struct ath_hal *ah)
+{
+	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+		    AR_PHY_AGC_CONTROL_ENABLE_NF);
+	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
+	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+}
+
+static void
+ath9k_hw_loadnf(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	struct ath9k_nfcal_hist *h;
+	int i, j;
+	int32_t val;
+	const u32 ar5416_cca_regs[6] = {
+		AR_PHY_CCA,
+		AR_PHY_CH1_CCA,
+		AR_PHY_CH2_CCA,
+		AR_PHY_EXT_CCA,
+		AR_PHY_CH1_EXT_CCA,
+		AR_PHY_CH2_EXT_CCA
+	};
+	u8 chainmask;
+
+	if (AR_SREV_9280(ah))
+		chainmask = 0x1B;
+	else
+		chainmask = 0x3F;
+
+#ifdef ATH_NF_PER_CHAN
+	h = chan->nfCalHist;
+#else
+	h = ah->nfCalHist;
+#endif
+
+	for (i = 0; i < NUM_NF_READINGS; i++) {
+		if (chainmask & (1 << i)) {
+			val = REG_READ(ah, ar5416_cca_regs[i]);
+			val &= 0xFFFFFE00;
+			val |= (((u32) (h[i].privNF) << 1) & 0x1ff);
+			REG_WRITE(ah, ar5416_cca_regs[i], val);
+		}
+	}
+
+	REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
+		    AR_PHY_AGC_CONTROL_ENABLE_NF);
+	REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
+		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
+	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+
+	for (j = 0; j < 1000; j++) {
+		if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
+		     AR_PHY_AGC_CONTROL_NF) == 0)
+			break;
+		udelay(10);
+	}
+
+	for (i = 0; i < NUM_NF_READINGS; i++) {
+		if (chainmask & (1 << i)) {
+			val = REG_READ(ah, ar5416_cca_regs[i]);
+			val &= 0xFFFFFE00;
+			val |= (((u32) (-50) << 1) & 0x1ff);
+			REG_WRITE(ah, ar5416_cca_regs[i], val);
+		}
+	}
+}
+
+static int16_t ath9k_hw_getnf(struct ath_hal *ah,
+			      struct ath9k_channel *chan)
+{
+	int16_t nf, nfThresh;
+	int16_t nfarray[NUM_NF_READINGS] = { 0 };
+	struct ath9k_nfcal_hist *h;
+	u8 chainmask;
+
+	if (AR_SREV_9280(ah))
+		chainmask = 0x1B;
+	else
+		chainmask = 0x3F;
+
+	chan->channelFlags &= (~CHANNEL_CW_INT);
+	if (REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: NF did not complete in calibration window\n",
+			 __func__);
+		nf = 0;
+		chan->rawNoiseFloor = nf;
+		return chan->rawNoiseFloor;
+	} else {
+		ar5416GetNoiseFloor(ah, nfarray);
+		nf = nfarray[0];
+		if (getNoiseFloorThresh(ah, chan, &nfThresh)
+		    && nf > nfThresh) {
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: noise floor failed detected; "
+				 "detected %d, threshold %d\n", __func__,
+				 nf, nfThresh);
+			chan->channelFlags |= CHANNEL_CW_INT;
+		}
+	}
+
+#ifdef ATH_NF_PER_CHAN
+	h = chan->nfCalHist;
+#else
+	h = ah->nfCalHist;
+#endif
+
+	ath9k_hw_update_nfcal_hist_buffer(h, nfarray);
+	chan->rawNoiseFloor = h[0].privNF;
+
+	return chan->rawNoiseFloor;
+}
+
+static void ath9k_hw_update_mibstats(struct ath_hal *ah,
+			      struct ath9k_mib_stats *stats)
+{
+	stats->ackrcv_bad += REG_READ(ah, AR_ACK_FAIL);
+	stats->rts_bad += REG_READ(ah, AR_RTS_FAIL);
+	stats->fcs_bad += REG_READ(ah, AR_FCS_FAIL);
+	stats->rts_good += REG_READ(ah, AR_RTS_OK);
+	stats->beacons += REG_READ(ah, AR_BEACON_CNT);
+}
+
+static void ath9k_enable_mib_counters(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Enable mib counters\n");
+
+	ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats);
+
+	REG_WRITE(ah, AR_FILT_OFDM, 0);
+	REG_WRITE(ah, AR_FILT_CCK, 0);
+	REG_WRITE(ah, AR_MIBC,
+		  ~(AR_MIBC_COW | AR_MIBC_FMC | AR_MIBC_CMC | AR_MIBC_MCS)
+		  & 0x0f);
+	REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
+	REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
+}
+
+static void ath9k_hw_disable_mib_counters(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Disabling MIB counters\n");
+
+	REG_WRITE(ah, AR_MIBC, AR_MIBC_FMC | AR_MIBC_CMC);
+
+	ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats);
+
+	REG_WRITE(ah, AR_FILT_OFDM, 0);
+	REG_WRITE(ah, AR_FILT_CCK, 0);
+}
+
+static int ath9k_hw_get_ani_channel_idx(struct ath_hal *ah,
+					struct ath9k_channel *chan)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ahp->ah_ani); i++) {
+		if (ahp->ah_ani[i].c.channel == chan->channel)
+			return i;
+		if (ahp->ah_ani[i].c.channel == 0) {
+			ahp->ah_ani[i].c.channel = chan->channel;
+			ahp->ah_ani[i].c.channelFlags = chan->channelFlags;
+			return i;
+		}
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+		 "No more channel states left. Using channel 0\n");
+	return 0;
+}
+
+static void ath9k_hw_ani_attach(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	ahp->ah_hasHwPhyCounters = 1;
+
+	memset(ahp->ah_ani, 0, sizeof(ahp->ah_ani));
+	for (i = 0; i < ARRAY_SIZE(ahp->ah_ani); i++) {
+		ahp->ah_ani[i].ofdmTrigHigh = ATH9K_ANI_OFDM_TRIG_HIGH;
+		ahp->ah_ani[i].ofdmTrigLow = ATH9K_ANI_OFDM_TRIG_LOW;
+		ahp->ah_ani[i].cckTrigHigh = ATH9K_ANI_CCK_TRIG_HIGH;
+		ahp->ah_ani[i].cckTrigLow = ATH9K_ANI_CCK_TRIG_LOW;
+		ahp->ah_ani[i].rssiThrHigh = ATH9K_ANI_RSSI_THR_HIGH;
+		ahp->ah_ani[i].rssiThrLow = ATH9K_ANI_RSSI_THR_LOW;
+		ahp->ah_ani[i].ofdmWeakSigDetectOff =
+			!ATH9K_ANI_USE_OFDM_WEAK_SIG;
+		ahp->ah_ani[i].cckWeakSigThreshold =
+			ATH9K_ANI_CCK_WEAK_SIG_THR;
+		ahp->ah_ani[i].spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
+		ahp->ah_ani[i].firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
+		if (ahp->ah_hasHwPhyCounters) {
+			ahp->ah_ani[i].ofdmPhyErrBase =
+				AR_PHY_COUNTMAX - ATH9K_ANI_OFDM_TRIG_HIGH;
+			ahp->ah_ani[i].cckPhyErrBase =
+				AR_PHY_COUNTMAX - ATH9K_ANI_CCK_TRIG_HIGH;
+		}
+	}
+	if (ahp->ah_hasHwPhyCounters) {
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+			"Setting OfdmErrBase = 0x%08x\n",
+			ahp->ah_ani[0].ofdmPhyErrBase);
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Setting cckErrBase = 0x%08x\n",
+			ahp->ah_ani[0].cckPhyErrBase);
+
+		REG_WRITE(ah, AR_PHY_ERR_1, ahp->ah_ani[0].ofdmPhyErrBase);
+		REG_WRITE(ah, AR_PHY_ERR_2, ahp->ah_ani[0].cckPhyErrBase);
+		ath9k_enable_mib_counters(ah);
+	}
+	ahp->ah_aniPeriod = ATH9K_ANI_PERIOD;
+	if (ah->ah_config.enable_ani)
+		ahp->ah_procPhyErr |= HAL_PROCESS_ANI;
+}
+
+static inline void ath9k_hw_ani_setup(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	const int totalSizeDesired[] = { -55, -55, -55, -55, -62 };
+	const int coarseHigh[] = { -14, -14, -14, -14, -12 };
+	const int coarseLow[] = { -64, -64, -64, -64, -70 };
+	const int firpwr[] = { -78, -78, -78, -78, -80 };
+
+	for (i = 0; i < 5; i++) {
+		ahp->ah_totalSizeDesired[i] = totalSizeDesired[i];
+		ahp->ah_coarseHigh[i] = coarseHigh[i];
+		ahp->ah_coarseLow[i] = coarseLow[i];
+		ahp->ah_firpwr[i] = firpwr[i];
+	}
+}
+
+static void ath9k_hw_ani_detach(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Detaching Ani\n");
+	if (ahp->ah_hasHwPhyCounters) {
+		ath9k_hw_disable_mib_counters(ah);
+		REG_WRITE(ah, AR_PHY_ERR_1, 0);
+		REG_WRITE(ah, AR_PHY_ERR_2, 0);
+	}
+}
+
+
+static bool ath9k_hw_ani_control(struct ath_hal *ah,
+				 enum ath9k_ani_cmd cmd, int param)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState = ahp->ah_curani;
+
+	switch (cmd & ahp->ah_ani_function) {
+	case ATH9K_ANI_NOISE_IMMUNITY_LEVEL:{
+		u32 level = param;
+
+		if (level >= ARRAY_SIZE(ahp->ah_totalSizeDesired)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+				 "%s: level out of range (%u > %u)\n",
+				 __func__, level,
+				 (unsigned) ARRAY_SIZE(ahp->
+						       ah_totalSizeDesired));
+			return false;
+		}
+
+		REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
+			      AR_PHY_DESIRED_SZ_TOT_DES,
+			      ahp->ah_totalSizeDesired[level]);
+		REG_RMW_FIELD(ah, AR_PHY_AGC_CTL1,
+			      AR_PHY_AGC_CTL1_COARSE_LOW,
+			      ahp->ah_coarseLow[level]);
+		REG_RMW_FIELD(ah, AR_PHY_AGC_CTL1,
+			      AR_PHY_AGC_CTL1_COARSE_HIGH,
+			      ahp->ah_coarseHigh[level]);
+		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
+			      AR_PHY_FIND_SIG_FIRPWR,
+			      ahp->ah_firpwr[level]);
+
+		if (level > aniState->noiseImmunityLevel)
+			ahp->ah_stats.ast_ani_niup++;
+		else if (level < aniState->noiseImmunityLevel)
+			ahp->ah_stats.ast_ani_nidown++;
+		aniState->noiseImmunityLevel = level;
+		break;
+	}
+	case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
+		const int m1ThreshLow[] = { 127, 50 };
+		const int m2ThreshLow[] = { 127, 40 };
+		const int m1Thresh[] = { 127, 0x4d };
+		const int m2Thresh[] = { 127, 0x40 };
+		const int m2CountThr[] = { 31, 16 };
+		const int m2CountThrLow[] = { 63, 48 };
+		u32 on = param ? 1 : 0;
+
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+			      AR_PHY_SFCORR_LOW_M1_THRESH_LOW,
+			      m1ThreshLow[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+			      AR_PHY_SFCORR_LOW_M2_THRESH_LOW,
+			      m2ThreshLow[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+			      AR_PHY_SFCORR_M1_THRESH,
+			      m1Thresh[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+			      AR_PHY_SFCORR_M2_THRESH,
+			      m2Thresh[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+			      AR_PHY_SFCORR_M2COUNT_THR,
+			      m2CountThr[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+			      AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW,
+			      m2CountThrLow[on]);
+
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M1_THRESH_LOW,
+			      m1ThreshLow[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M2_THRESH_LOW,
+			      m2ThreshLow[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M1_THRESH,
+			      m1Thresh[on]);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M2_THRESH,
+			      m2Thresh[on]);
+
+		if (on)
+			REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
+				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
+		else
+			REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
+				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
+
+		if (!on != aniState->ofdmWeakSigDetectOff) {
+			if (on)
+				ahp->ah_stats.ast_ani_ofdmon++;
+			else
+				ahp->ah_stats.ast_ani_ofdmoff++;
+			aniState->ofdmWeakSigDetectOff = !on;
+		}
+		break;
+	}
+	case ATH9K_ANI_CCK_WEAK_SIGNAL_THR:{
+		const int weakSigThrCck[] = { 8, 6 };
+		u32 high = param ? 1 : 0;
+
+		REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT,
+			      AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK,
+			      weakSigThrCck[high]);
+		if (high != aniState->cckWeakSigThreshold) {
+			if (high)
+				ahp->ah_stats.ast_ani_cckhigh++;
+			else
+				ahp->ah_stats.ast_ani_ccklow++;
+			aniState->cckWeakSigThreshold = high;
+		}
+		break;
+	}
+	case ATH9K_ANI_FIRSTEP_LEVEL:{
+		const int firstep[] = { 0, 4, 8 };
+		u32 level = param;
+
+		if (level >= ARRAY_SIZE(firstep)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+				 "%s: level out of range (%u > %u)\n",
+				 __func__, level,
+				(unsigned) ARRAY_SIZE(firstep));
+			return false;
+		}
+		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
+			      AR_PHY_FIND_SIG_FIRSTEP,
+			      firstep[level]);
+		if (level > aniState->firstepLevel)
+			ahp->ah_stats.ast_ani_stepup++;
+		else if (level < aniState->firstepLevel)
+			ahp->ah_stats.ast_ani_stepdown++;
+		aniState->firstepLevel = level;
+		break;
+	}
+	case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
+		const int cycpwrThr1[] =
+			{ 2, 4, 6, 8, 10, 12, 14, 16 };
+		u32 level = param;
+
+		if (level >= ARRAY_SIZE(cycpwrThr1)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+				 "%s: level out of range (%u > %u)\n",
+				 __func__, level,
+				 (unsigned)
+				ARRAY_SIZE(cycpwrThr1));
+			return false;
+		}
+		REG_RMW_FIELD(ah, AR_PHY_TIMING5,
+			      AR_PHY_TIMING5_CYCPWR_THR1,
+			      cycpwrThr1[level]);
+		if (level > aniState->spurImmunityLevel)
+			ahp->ah_stats.ast_ani_spurup++;
+		else if (level < aniState->spurImmunityLevel)
+			ahp->ah_stats.ast_ani_spurdown++;
+		aniState->spurImmunityLevel = level;
+		break;
+	}
+	case ATH9K_ANI_PRESENT:
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+			"%s: invalid cmd %u\n", __func__, cmd);
+		return false;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "%s: ANI parameters:\n", __func__);
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+		"noiseImmunityLevel=%d, spurImmunityLevel=%d, "
+		"ofdmWeakSigDetectOff=%d\n",
+		 aniState->noiseImmunityLevel, aniState->spurImmunityLevel,
+		 !aniState->ofdmWeakSigDetectOff);
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+		"cckWeakSigThreshold=%d, "
+		"firstepLevel=%d, listenTime=%d\n",
+		 aniState->cckWeakSigThreshold, aniState->firstepLevel,
+		 aniState->listenTime);
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+		 "cycleCount=%d, ofdmPhyErrCount=%d, cckPhyErrCount=%d\n\n",
+		 aniState->cycleCount, aniState->ofdmPhyErrCount,
+		 aniState->cckPhyErrCount);
+	return true;
+}
+
+static void ath9k_ani_restart(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState;
+
+	if (!DO_ANI(ah))
+		return;
+
+	aniState = ahp->ah_curani;
+
+	aniState->listenTime = 0;
+	if (ahp->ah_hasHwPhyCounters) {
+		if (aniState->ofdmTrigHigh > AR_PHY_COUNTMAX) {
+			aniState->ofdmPhyErrBase = 0;
+			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+				 "OFDM Trigger is too high for hw counters\n");
+		} else {
+			aniState->ofdmPhyErrBase =
+				AR_PHY_COUNTMAX - aniState->ofdmTrigHigh;
+		}
+		if (aniState->cckTrigHigh > AR_PHY_COUNTMAX) {
+			aniState->cckPhyErrBase = 0;
+			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+				 "CCK Trigger is too high for hw counters\n");
+		} else {
+			aniState->cckPhyErrBase =
+				AR_PHY_COUNTMAX - aniState->cckTrigHigh;
+		}
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+			 "%s: Writing ofdmbase=%u   cckbase=%u\n",
+			 __func__, aniState->ofdmPhyErrBase,
+			 aniState->cckPhyErrBase);
+		REG_WRITE(ah, AR_PHY_ERR_1, aniState->ofdmPhyErrBase);
+		REG_WRITE(ah, AR_PHY_ERR_2, aniState->cckPhyErrBase);
+		REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
+		REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
+
+		ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats);
+	}
+	aniState->ofdmPhyErrCount = 0;
+	aniState->cckPhyErrCount = 0;
+}
+
+static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *chan = ah->ah_curchan;
+	struct ar5416AniState *aniState;
+	enum wireless_mode mode;
+	int32_t rssi;
+
+	if (!DO_ANI(ah))
+		return;
+
+	aniState = ahp->ah_curani;
+
+	if (aniState->noiseImmunityLevel < HAL_NOISE_IMMUNE_MAX) {
+		if (ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
+					 aniState->noiseImmunityLevel + 1)) {
+			return;
+		}
+	}
+
+	if (aniState->spurImmunityLevel < HAL_SPUR_IMMUNE_MAX) {
+		if (ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
+					 aniState->spurImmunityLevel + 1)) {
+			return;
+		}
+	}
+
+	if (ah->ah_opmode == ATH9K_M_HOSTAP) {
+		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
+			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+					     aniState->firstepLevel + 1);
+		}
+		return;
+	}
+	rssi = BEACON_RSSI(ahp);
+	if (rssi > aniState->rssiThrHigh) {
+		if (!aniState->ofdmWeakSigDetectOff) {
+			if (ath9k_hw_ani_control(ah,
+					 ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+					 false)) {
+				ath9k_hw_ani_control(ah,
+					ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
+					0);
+				return;
+			}
+		}
+		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
+			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+					     aniState->firstepLevel + 1);
+			return;
+		}
+	} else if (rssi > aniState->rssiThrLow) {
+		if (aniState->ofdmWeakSigDetectOff)
+			ath9k_hw_ani_control(ah,
+				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+				     true);
+		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX)
+			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+					     aniState->firstepLevel + 1);
+		return;
+	} else {
+		mode = ath9k_hw_chan2wmode(ah, chan);
+		if (mode == ATH9K_MODE_11G || mode == ATH9K_MODE_11B) {
+			if (!aniState->ofdmWeakSigDetectOff)
+				ath9k_hw_ani_control(ah,
+				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+				     false);
+			if (aniState->firstepLevel > 0)
+				ath9k_hw_ani_control(ah,
+						     ATH9K_ANI_FIRSTEP_LEVEL,
+						     0);
+			return;
+		}
+	}
+}
+
+static void ath9k_hw_ani_cck_err_trigger(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *chan = ah->ah_curchan;
+	struct ar5416AniState *aniState;
+	enum wireless_mode mode;
+	int32_t rssi;
+
+	if (!DO_ANI(ah))
+		return;
+
+	aniState = ahp->ah_curani;
+	if (aniState->noiseImmunityLevel < HAL_NOISE_IMMUNE_MAX) {
+		if (ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
+					 aniState->noiseImmunityLevel + 1)) {
+			return;
+		}
+	}
+	if (ah->ah_opmode == ATH9K_M_HOSTAP) {
+		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
+			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+					     aniState->firstepLevel + 1);
+		}
+		return;
+	}
+	rssi = BEACON_RSSI(ahp);
+	if (rssi > aniState->rssiThrLow) {
+		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX)
+			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+					     aniState->firstepLevel + 1);
+	} else {
+		mode = ath9k_hw_chan2wmode(ah, chan);
+		if (mode == ATH9K_MODE_11G || mode == ATH9K_MODE_11B) {
+			if (aniState->firstepLevel > 0)
+				ath9k_hw_ani_control(ah,
+						     ATH9K_ANI_FIRSTEP_LEVEL,
+						     0);
+		}
+	}
+}
+
+static void ath9k_ani_reset(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState;
+	struct ath9k_channel *chan = ah->ah_curchan;
+	int index;
+
+	if (!DO_ANI(ah))
+		return;
+
+	index = ath9k_hw_get_ani_channel_idx(ah, chan);
+	aniState = &ahp->ah_ani[index];
+	ahp->ah_curani = aniState;
+
+	if (DO_ANI(ah) && ah->ah_opmode != ATH9K_M_STA
+	    && ah->ah_opmode != ATH9K_M_IBSS) {
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+			 "%s: Reset ANI state opmode %u\n", __func__,
+			 ah->ah_opmode);
+		ahp->ah_stats.ast_ani_reset++;
+		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0);
+		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
+		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0);
+		ath9k_hw_ani_control(ah,
+				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+				     !ATH9K_ANI_USE_OFDM_WEAK_SIG);
+		ath9k_hw_ani_control(ah, ATH9K_ANI_CCK_WEAK_SIGNAL_THR,
+				     ATH9K_ANI_CCK_WEAK_SIG_THR);
+		ath9k_hw_setrxfilter(ah,
+				     ath9k_hw_getrxfilter(ah) |
+				     ATH9K_RX_FILTER_PHYERR);
+		if (ah->ah_opmode == ATH9K_M_HOSTAP) {
+			ahp->ah_curani->ofdmTrigHigh =
+				ah->ah_config.ofdm_trig_high;
+			ahp->ah_curani->ofdmTrigLow =
+				ah->ah_config.ofdm_trig_low;
+			ahp->ah_curani->cckTrigHigh =
+				ah->ah_config.cck_trig_high;
+			ahp->ah_curani->cckTrigLow =
+				ah->ah_config.cck_trig_low;
+		}
+		ath9k_ani_restart(ah);
+		return;
+	}
+
+	if (aniState->noiseImmunityLevel != 0)
+		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
+				     aniState->noiseImmunityLevel);
+	if (aniState->spurImmunityLevel != 0)
+		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
+				     aniState->spurImmunityLevel);
+	if (aniState->ofdmWeakSigDetectOff)
+		ath9k_hw_ani_control(ah,
+				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+				     !aniState->ofdmWeakSigDetectOff);
+	if (aniState->cckWeakSigThreshold)
+		ath9k_hw_ani_control(ah, ATH9K_ANI_CCK_WEAK_SIGNAL_THR,
+				     aniState->cckWeakSigThreshold);
+	if (aniState->firstepLevel != 0)
+		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+				     aniState->firstepLevel);
+	if (ahp->ah_hasHwPhyCounters) {
+		ath9k_hw_setrxfilter(ah,
+				     ath9k_hw_getrxfilter(ah) &
+				     ~ATH9K_RX_FILTER_PHYERR);
+		ath9k_ani_restart(ah);
+		REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
+		REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
+
+	} else {
+		ath9k_ani_restart(ah);
+		ath9k_hw_setrxfilter(ah,
+				     ath9k_hw_getrxfilter(ah) |
+				     ATH9K_RX_FILTER_PHYERR);
+	}
+}
+
+void ath9k_hw_procmibevent(struct ath_hal *ah,
+			   const struct ath9k_node_stats *stats)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 phyCnt1, phyCnt2;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Processing Mib Intr\n");
+
+	REG_WRITE(ah, AR_FILT_OFDM, 0);
+	REG_WRITE(ah, AR_FILT_CCK, 0);
+	if (!(REG_READ(ah, AR_SLP_MIB_CTRL) & AR_SLP_MIB_PENDING))
+		REG_WRITE(ah, AR_SLP_MIB_CTRL, AR_SLP_MIB_CLEAR);
+
+	ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats);
+	ahp->ah_stats.ast_nodestats = *stats;
+
+	if (!DO_ANI(ah))
+		return;
+
+	phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
+	phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
+	if (((phyCnt1 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK) ||
+	    ((phyCnt2 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK)) {
+		struct ar5416AniState *aniState = ahp->ah_curani;
+		u32 ofdmPhyErrCnt, cckPhyErrCnt;
+
+		ofdmPhyErrCnt = phyCnt1 - aniState->ofdmPhyErrBase;
+		ahp->ah_stats.ast_ani_ofdmerrs +=
+			ofdmPhyErrCnt - aniState->ofdmPhyErrCount;
+		aniState->ofdmPhyErrCount = ofdmPhyErrCnt;
+
+		cckPhyErrCnt = phyCnt2 - aniState->cckPhyErrBase;
+		ahp->ah_stats.ast_ani_cckerrs +=
+			cckPhyErrCnt - aniState->cckPhyErrCount;
+		aniState->cckPhyErrCount = cckPhyErrCnt;
+
+		if (aniState->ofdmPhyErrCount > aniState->ofdmTrigHigh)
+			ath9k_hw_ani_ofdm_err_trigger(ah);
+		if (aniState->cckPhyErrCount > aniState->cckTrigHigh)
+			ath9k_hw_ani_cck_err_trigger(ah);
+
+		ath9k_ani_restart(ah);
+	}
+}
+
+static void ath9k_hw_ani_lower_immunity(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState;
+	int32_t rssi;
+
+	aniState = ahp->ah_curani;
+
+	if (ah->ah_opmode == ATH9K_M_HOSTAP) {
+		if (aniState->firstepLevel > 0) {
+			if (ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
+						 aniState->firstepLevel - 1)) {
+				return;
+			}
+		}
+	} else {
+		rssi = BEACON_RSSI(ahp);
+		if (rssi > aniState->rssiThrHigh) {
+			/* XXX: Handle me */
+		} else if (rssi > aniState->rssiThrLow) {
+			if (aniState->ofdmWeakSigDetectOff) {
+				if (ath9k_hw_ani_control(ah,
+					 ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+					 true) ==
+				    true) {
+					return;
+				}
+			}
+			if (aniState->firstepLevel > 0) {
+				if (ath9k_hw_ani_control
+				    (ah, ATH9K_ANI_FIRSTEP_LEVEL,
+				     aniState->firstepLevel - 1) ==
+				    true) {
+					return;
+				}
+			}
+		} else {
+			if (aniState->firstepLevel > 0) {
+				if (ath9k_hw_ani_control
+				    (ah, ATH9K_ANI_FIRSTEP_LEVEL,
+				     aniState->firstepLevel - 1) ==
+				    true) {
+					return;
+				}
+			}
+		}
+	}
+
+	if (aniState->spurImmunityLevel > 0) {
+		if (ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
+					 aniState->spurImmunityLevel - 1)) {
+			return;
+		}
+	}
+
+	if (aniState->noiseImmunityLevel > 0) {
+		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
+				     aniState->noiseImmunityLevel - 1);
+		return;
+	}
+}
+
+static int32_t ath9k_hw_ani_get_listen_time(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState;
+	u32 txFrameCount, rxFrameCount, cycleCount;
+	int32_t listenTime;
+
+	txFrameCount = REG_READ(ah, AR_TFCNT);
+	rxFrameCount = REG_READ(ah, AR_RFCNT);
+	cycleCount = REG_READ(ah, AR_CCCNT);
+
+	aniState = ahp->ah_curani;
+	if (aniState->cycleCount == 0 || aniState->cycleCount > cycleCount) {
+
+		listenTime = 0;
+		ahp->ah_stats.ast_ani_lzero++;
+	} else {
+		int32_t ccdelta = cycleCount - aniState->cycleCount;
+		int32_t rfdelta = rxFrameCount - aniState->rxFrameCount;
+		int32_t tfdelta = txFrameCount - aniState->txFrameCount;
+		listenTime = (ccdelta - rfdelta - tfdelta) / 44000;
+	}
+	aniState->cycleCount = cycleCount;
+	aniState->txFrameCount = txFrameCount;
+	aniState->rxFrameCount = rxFrameCount;
+
+	return listenTime;
+}
+
+void ath9k_hw_ani_monitor(struct ath_hal *ah,
+			  const struct ath9k_node_stats *stats,
+			  struct ath9k_channel *chan)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416AniState *aniState;
+	int32_t listenTime;
+
+	aniState = ahp->ah_curani;
+	ahp->ah_stats.ast_nodestats = *stats;
+
+	listenTime = ath9k_hw_ani_get_listen_time(ah);
+	if (listenTime < 0) {
+		ahp->ah_stats.ast_ani_lneg++;
+		ath9k_ani_restart(ah);
+		return;
+	}
+
+	aniState->listenTime += listenTime;
+
+	if (ahp->ah_hasHwPhyCounters) {
+		u32 phyCnt1, phyCnt2;
+		u32 ofdmPhyErrCnt, cckPhyErrCnt;
+
+		ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats);
+
+		phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
+		phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
+
+		if (phyCnt1 < aniState->ofdmPhyErrBase ||
+		    phyCnt2 < aniState->cckPhyErrBase) {
+			if (phyCnt1 < aniState->ofdmPhyErrBase) {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+					 "%s: phyCnt1 0x%x, resetting "
+					 "counter value to 0x%x\n",
+					 __func__, phyCnt1,
+					 aniState->ofdmPhyErrBase);
+				REG_WRITE(ah, AR_PHY_ERR_1,
+					  aniState->ofdmPhyErrBase);
+				REG_WRITE(ah, AR_PHY_ERR_MASK_1,
+					  AR_PHY_ERR_OFDM_TIMING);
+			}
+			if (phyCnt2 < aniState->cckPhyErrBase) {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+					 "%s: phyCnt2 0x%x, resetting "
+					 "counter value to 0x%x\n",
+					 __func__, phyCnt2,
+					 aniState->cckPhyErrBase);
+				REG_WRITE(ah, AR_PHY_ERR_2,
+					  aniState->cckPhyErrBase);
+				REG_WRITE(ah, AR_PHY_ERR_MASK_2,
+					  AR_PHY_ERR_CCK_TIMING);
+			}
+			return;
+		}
+
+		ofdmPhyErrCnt = phyCnt1 - aniState->ofdmPhyErrBase;
+		ahp->ah_stats.ast_ani_ofdmerrs +=
+			ofdmPhyErrCnt - aniState->ofdmPhyErrCount;
+		aniState->ofdmPhyErrCount = ofdmPhyErrCnt;
+
+		cckPhyErrCnt = phyCnt2 - aniState->cckPhyErrBase;
+		ahp->ah_stats.ast_ani_cckerrs +=
+			cckPhyErrCnt - aniState->cckPhyErrCount;
+		aniState->cckPhyErrCount = cckPhyErrCnt;
+	}
+
+	if (!DO_ANI(ah))
+		return;
+
+	if (aniState->listenTime > 5 * ahp->ah_aniPeriod) {
+		if (aniState->ofdmPhyErrCount <= aniState->listenTime *
+		    aniState->ofdmTrigLow / 1000 &&
+		    aniState->cckPhyErrCount <= aniState->listenTime *
+		    aniState->cckTrigLow / 1000)
+			ath9k_hw_ani_lower_immunity(ah);
+		ath9k_ani_restart(ah);
+	} else if (aniState->listenTime > ahp->ah_aniPeriod) {
+		if (aniState->ofdmPhyErrCount > aniState->listenTime *
+		    aniState->ofdmTrigHigh / 1000) {
+			ath9k_hw_ani_ofdm_err_trigger(ah);
+			ath9k_ani_restart(ah);
+		} else if (aniState->cckPhyErrCount >
+			   aniState->listenTime * aniState->cckTrigHigh /
+			   1000) {
+			ath9k_hw_ani_cck_err_trigger(ah);
+			ath9k_ani_restart(ah);
+		}
+	}
+}
+
+#ifndef ATH_NF_PER_CHAN
+static void ath9k_init_nfcal_hist_buffer(struct ath_hal *ah)
+{
+	int i, j;
+
+	for (i = 0; i < NUM_NF_READINGS; i++) {
+		ah->nfCalHist[i].currIndex = 0;
+		ah->nfCalHist[i].privNF = AR_PHY_CCA_MAX_GOOD_VALUE;
+		ah->nfCalHist[i].invalidNFcount =
+			AR_PHY_CCA_FILTERWINDOW_LENGTH;
+		for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) {
+			ah->nfCalHist[i].nfCalBuffer[j] =
+				AR_PHY_CCA_MAX_GOOD_VALUE;
+		}
+	}
+	return;
+}
+#endif
+
+static void ath9k_hw_gpio_cfg_output_mux(struct ath_hal *ah,
+					 u32 gpio, u32 type)
+{
+	int addr;
+	u32 gpio_shift, tmp;
+
+	if (gpio > 11)
+		addr = AR_GPIO_OUTPUT_MUX3;
+	else if (gpio > 5)
+		addr = AR_GPIO_OUTPUT_MUX2;
+	else
+		addr = AR_GPIO_OUTPUT_MUX1;
+
+	gpio_shift = (gpio % 6) * 5;
+
+	if (AR_SREV_9280_20_OR_LATER(ah)
+	    || (addr != AR_GPIO_OUTPUT_MUX1)) {
+		REG_RMW(ah, addr, (type << gpio_shift),
+			(0x1f << gpio_shift));
+	} else {
+		tmp = REG_READ(ah, addr);
+		tmp = ((tmp & 0x1F0) << 1) | (tmp & ~0x1F0);
+		tmp &= ~(0x1f << gpio_shift);
+		tmp |= (type << gpio_shift);
+		REG_WRITE(ah, addr, tmp);
+	}
+}
+
+static bool ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio,
+				enum ath9k_gpio_output_mux_type
+				halSignalType)
+{
+	u32 ah_signal_type;
+	u32 gpio_shift;
+
+	static u32 MuxSignalConversionTable[] = {
+
+		AR_GPIO_OUTPUT_MUX_AS_OUTPUT,
+
+		AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED,
+
+		AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED,
+
+		AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED,
+
+		AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED,
+	};
+
+	if ((halSignalType >= 0)
+	    && (halSignalType < ARRAY_SIZE(MuxSignalConversionTable)))
+		ah_signal_type = MuxSignalConversionTable[halSignalType];
+	else
+		return false;
+
+	ath9k_hw_gpio_cfg_output_mux(ah, gpio, ah_signal_type);
+
+	gpio_shift = 2 * gpio;
+
+	REG_RMW(ah,
+		AR_GPIO_OE_OUT,
+		(AR_GPIO_OE_OUT_DRV_ALL << gpio_shift),
+		(AR_GPIO_OE_OUT_DRV << gpio_shift));
+
+	return true;
+}
+
+static bool ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio,
+			      u32 val)
+{
+	REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio),
+		AR_GPIO_BIT(gpio));
+	return true;
+}
+
+static u32 ath9k_hw_gpio_get(struct ath_hal *ah, u32 gpio)
+{
+	if (gpio >= ah->ah_caps.num_gpio_pins)
+		return 0xffffffff;
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		return (MS
+			(REG_READ(ah, AR_GPIO_IN_OUT),
+			 AR928X_GPIO_IN_VAL) & AR_GPIO_BIT(gpio)) != 0;
+	} else {
+		return (MS(REG_READ(ah, AR_GPIO_IN_OUT), AR_GPIO_IN_VAL) &
+			AR_GPIO_BIT(gpio)) != 0;
+	}
+}
+
+static inline int ath9k_hw_post_attach(struct ath_hal *ah)
+{
+	int ecode;
+
+	if (!ath9k_hw_chip_test(ah)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+			 "%s: hardware self-test failed\n", __func__);
+		return -ENODEV;
+	}
+
+	ecode = ath9k_hw_rf_claim(ah);
+	if (ecode != 0)
+		return ecode;
+
+	ecode = ath9k_hw_eeprom_attach(ah);
+	if (ecode != 0)
+		return ecode;
+	ecode = ath9k_hw_rfattach(ah);
+	if (ecode != 0)
+		return ecode;
+
+	if (!AR_SREV_9100(ah)) {
+		ath9k_hw_ani_setup(ah);
+		ath9k_hw_ani_attach(ah);
+	}
+	return 0;
+}
+
+static u32 ath9k_hw_ini_fixup(struct ath_hal *ah,
+				    struct ar5416_eeprom *pEepData,
+				    u32 reg, u32 value)
+{
+	struct base_eep_header *pBase = &(pEepData->baseEepHeader);
+
+	switch (ah->ah_devid) {
+	case AR9280_DEVID_PCI:
+		if (reg == 0x7894) {
+			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+				 "ini VAL: %x  EEPROM: %x\n", value,
+				 (pBase->version & 0xff));
+
+			if ((pBase->version & 0xff) > 0x0a) {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+					 "PWDCLKIND: %d\n",
+					 pBase->pwdclkind);
+				value &= ~AR_AN_TOP2_PWDCLKIND;
+				value |= AR_AN_TOP2_PWDCLKIND & (pBase->
+					 pwdclkind << AR_AN_TOP2_PWDCLKIND_S);
+			} else {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+					 "PWDCLKIND Earlier Rev\n");
+			}
+
+			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+				 "final ini VAL: %x\n", value);
+		}
+		break;
+	}
+	return value;
+}
+
+static bool ath9k_hw_fill_cap_info(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	u16 capField = 0, eeval;
+
+	eeval = ath9k_hw_get_eeprom(ahp, EEP_REG_0);
+
+	ah->ah_currentRD = eeval;
+
+	eeval = ath9k_hw_get_eeprom(ahp, EEP_REG_1);
+	ah->ah_currentRDExt = eeval;
+
+	capField = ath9k_hw_get_eeprom(ahp, EEP_OP_CAP);
+
+	if (ah->ah_opmode != ATH9K_M_HOSTAP &&
+	    ah->ah_subvendorid == AR_SUBVENDOR_ID_NEW_A) {
+		if (ah->ah_currentRD == 0x64 || ah->ah_currentRD == 0x65)
+			ah->ah_currentRD += 5;
+		else if (ah->ah_currentRD == 0x41)
+			ah->ah_currentRD = 0x43;
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			 "%s: regdomain mapped to 0x%x\n", __func__,
+			 ah->ah_currentRD);
+	}
+
+	eeval = ath9k_hw_get_eeprom(ahp, EEP_OP_MODE);
+	bitmap_zero(pCap->wireless_modes, ATH9K_MODE_MAX);
+
+	if (eeval & AR5416_OPFLAGS_11A) {
+		set_bit(ATH9K_MODE_11A, pCap->wireless_modes);
+		if (ah->ah_config.ht_enable) {
+			if (!(eeval & AR5416_OPFLAGS_N_5G_HT20))
+				set_bit(ATH9K_MODE_11NA_HT20,
+					pCap->wireless_modes);
+			if (!(eeval & AR5416_OPFLAGS_N_5G_HT40)) {
+				set_bit(ATH9K_MODE_11NA_HT40PLUS,
+					pCap->wireless_modes);
+				set_bit(ATH9K_MODE_11NA_HT40MINUS,
+					pCap->wireless_modes);
+			}
+		}
+	}
+
+	if (eeval & AR5416_OPFLAGS_11G) {
+		set_bit(ATH9K_MODE_11B, pCap->wireless_modes);
+		set_bit(ATH9K_MODE_11G, pCap->wireless_modes);
+		if (ah->ah_config.ht_enable) {
+			if (!(eeval & AR5416_OPFLAGS_N_2G_HT20))
+				set_bit(ATH9K_MODE_11NG_HT20,
+					pCap->wireless_modes);
+			if (!(eeval & AR5416_OPFLAGS_N_2G_HT40)) {
+				set_bit(ATH9K_MODE_11NG_HT40PLUS,
+					pCap->wireless_modes);
+				set_bit(ATH9K_MODE_11NG_HT40MINUS,
+					pCap->wireless_modes);
+			}
+		}
+	}
+
+	pCap->tx_chainmask = ath9k_hw_get_eeprom(ahp, EEP_TX_MASK);
+	if ((ah->ah_isPciExpress)
+	    || (eeval & AR5416_OPFLAGS_11A)) {
+		pCap->rx_chainmask =
+			ath9k_hw_get_eeprom(ahp, EEP_RX_MASK);
+	} else {
+		pCap->rx_chainmask =
+			(ath9k_hw_gpio_get(ah, 0)) ? 0x5 : 0x7;
+	}
+
+	if (!(AR_SREV_9280(ah) && (ah->ah_macRev == 0)))
+		ahp->ah_miscMode |= AR_PCU_MIC_NEW_LOC_ENA;
+
+	pCap->low_2ghz_chan = 2312;
+	pCap->high_2ghz_chan = 2732;
+
+	pCap->low_5ghz_chan = 4920;
+	pCap->high_5ghz_chan = 6100;
+
+	pCap->hw_caps &= ~ATH9K_HW_CAP_CIPHER_CKIP;
+	pCap->hw_caps |= ATH9K_HW_CAP_CIPHER_TKIP;
+	pCap->hw_caps |= ATH9K_HW_CAP_CIPHER_AESCCM;
+
+	pCap->hw_caps &= ~ATH9K_HW_CAP_MIC_CKIP;
+	pCap->hw_caps |= ATH9K_HW_CAP_MIC_TKIP;
+	pCap->hw_caps |= ATH9K_HW_CAP_MIC_AESCCM;
+
+	pCap->hw_caps |= ATH9K_HW_CAP_CHAN_SPREAD;
+
+	if (ah->ah_config.ht_enable)
+		pCap->hw_caps |= ATH9K_HW_CAP_HT;
+	else
+		pCap->hw_caps &= ~ATH9K_HW_CAP_HT;
+
+	pCap->hw_caps |= ATH9K_HW_CAP_GTT;
+	pCap->hw_caps |= ATH9K_HW_CAP_VEOL;
+	pCap->hw_caps |= ATH9K_HW_CAP_BSSIDMASK;
+	pCap->hw_caps &= ~ATH9K_HW_CAP_MCAST_KEYSEARCH;
+
+	if (capField & AR_EEPROM_EEPCAP_MAXQCU)
+		pCap->total_queues =
+			MS(capField, AR_EEPROM_EEPCAP_MAXQCU);
+	else
+		pCap->total_queues = ATH9K_NUM_TX_QUEUES;
+
+	if (capField & AR_EEPROM_EEPCAP_KC_ENTRIES)
+		pCap->keycache_size =
+			1 << MS(capField, AR_EEPROM_EEPCAP_KC_ENTRIES);
+	else
+		pCap->keycache_size = AR_KEYTABLE_SIZE;
+
+	pCap->hw_caps |= ATH9K_HW_CAP_FASTCC;
+	pCap->num_mr_retries = 4;
+	pCap->tx_triglevel_max = MAX_TX_FIFO_THRESHOLD;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		pCap->num_gpio_pins = AR928X_NUM_GPIO;
+	else
+		pCap->num_gpio_pins = AR_NUM_GPIO;
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		pCap->hw_caps |= ATH9K_HW_CAP_WOW;
+		pCap->hw_caps |= ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT;
+	} else {
+		pCap->hw_caps &= ~ATH9K_HW_CAP_WOW;
+		pCap->hw_caps &= ~ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT;
+	}
+
+	if (AR_SREV_9160_10_OR_LATER(ah) || AR_SREV_9100(ah)) {
+		pCap->hw_caps |= ATH9K_HW_CAP_CST;
+		pCap->rts_aggr_limit = ATH_AMPDU_LIMIT_MAX;
+	} else {
+		pCap->rts_aggr_limit = (8 * 1024);
+	}
+
+	pCap->hw_caps |= ATH9K_HW_CAP_ENHANCEDPM;
+
+	ah->ah_rfsilent = ath9k_hw_get_eeprom(ahp, EEP_RF_SILENT);
+	if (ah->ah_rfsilent & EEP_RFSILENT_ENABLED) {
+		ahp->ah_gpioSelect =
+			MS(ah->ah_rfsilent, EEP_RFSILENT_GPIO_SEL);
+		ahp->ah_polarity =
+			MS(ah->ah_rfsilent, EEP_RFSILENT_POLARITY);
+
+		ath9k_hw_setcapability(ah, ATH9K_CAP_RFSILENT, 1, true,
+				       NULL);
+		pCap->hw_caps |= ATH9K_HW_CAP_RFSILENT;
+	}
+
+	if ((ah->ah_macVersion == AR_SREV_VERSION_5416_PCI) ||
+	    (ah->ah_macVersion == AR_SREV_VERSION_5416_PCIE) ||
+	    (ah->ah_macVersion == AR_SREV_VERSION_9160) ||
+	    (ah->ah_macVersion == AR_SREV_VERSION_9100) ||
+	    (ah->ah_macVersion == AR_SREV_VERSION_9280))
+		pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP;
+	else
+		pCap->hw_caps |= ATH9K_HW_CAP_AUTOSLEEP;
+
+	if (AR_SREV_9280(ah))
+		pCap->hw_caps &= ~ATH9K_HW_CAP_4KB_SPLITTRANS;
+	else
+		pCap->hw_caps |= ATH9K_HW_CAP_4KB_SPLITTRANS;
+
+	if (ah->ah_currentRDExt & (1 << REG_EXT_JAPAN_MIDBAND)) {
+		pCap->reg_cap =
+			AR_EEPROM_EEREGCAP_EN_KK_NEW_11A |
+			AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN |
+			AR_EEPROM_EEREGCAP_EN_KK_U2 |
+			AR_EEPROM_EEREGCAP_EN_KK_MIDBAND;
+	} else {
+		pCap->reg_cap =
+			AR_EEPROM_EEREGCAP_EN_KK_NEW_11A |
+			AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN;
+	}
+
+	pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
+
+	pCap->num_antcfg_5ghz =
+		ath9k_hw_get_num_ant_config(ahp, IEEE80211_BAND_5GHZ);
+	pCap->num_antcfg_2ghz =
+		ath9k_hw_get_num_ant_config(ahp, IEEE80211_BAND_2GHZ);
+
+	return true;
+}
+
+static void ar5416DisablePciePhy(struct ath_hal *ah)
+{
+	if (!AR_SREV_9100(ah))
+		return;
+
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x28000029);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x57160824);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x25980579);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x00000000);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+	REG_WRITE(ah, AR_PCIE_SERDES, 0x000e1007);
+
+	REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+}
+
+static void ath9k_set_power_sleep(struct ath_hal *ah, int setChip)
+{
+	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+	if (setChip) {
+		REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE,
+			    AR_RTC_FORCE_WAKE_EN);
+		if (!AR_SREV_9100(ah))
+			REG_WRITE(ah, AR_RC, AR_RC_AHB | AR_RC_HOSTIF);
+
+		REG_CLR_BIT(ah, (u16) (AR_RTC_RESET),
+			    AR_RTC_RESET_EN);
+	}
+}
+
+static void ath9k_set_power_network_sleep(struct ath_hal *ah, int setChip)
+{
+	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+	if (setChip) {
+		struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+		if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+			REG_WRITE(ah, AR_RTC_FORCE_WAKE,
+				  AR_RTC_FORCE_WAKE_ON_INT);
+		} else {
+			REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE,
+				    AR_RTC_FORCE_WAKE_EN);
+		}
+	}
+}
+
+static bool ath9k_hw_set_power_awake(struct ath_hal *ah,
+				     int setChip)
+{
+	u32 val;
+	int i;
+
+	if (setChip) {
+		if ((REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M) ==
+		    AR_RTC_STATUS_SHUTDOWN) {
+			if (ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)
+			    != true) {
+				return false;
+			}
+		}
+		if (AR_SREV_9100(ah))
+			REG_SET_BIT(ah, AR_RTC_RESET,
+				       AR_RTC_RESET_EN);
+
+		REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
+			    AR_RTC_FORCE_WAKE_EN);
+		udelay(50);
+
+		for (i = POWER_UP_TIME / 50; i > 0; i--) {
+			val = REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M;
+			if (val == AR_RTC_STATUS_ON)
+				break;
+			udelay(50);
+			REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
+				       AR_RTC_FORCE_WAKE_EN);
+		}
+		if (i == 0) {
+			DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+				 "%s: Failed to wakeup in %uus\n",
+				 __func__, POWER_UP_TIME / 20);
+			return false;
+		}
+	}
+
+	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+	return true;
+}
+
+bool ath9k_hw_setpower(struct ath_hal *ah,
+		       enum ath9k_power_mode mode)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	static const char *modes[] = {
+		"AWAKE",
+		"FULL-SLEEP",
+		"NETWORK SLEEP",
+		"UNDEFINED"
+	};
+	int status = true, setChip = true;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT, "%s: %s -> %s (%s)\n", __func__,
+		 modes[ahp->ah_powerMode], modes[mode],
+		 setChip ? "set chip " : "");
+
+	switch (mode) {
+	case ATH9K_PM_AWAKE:
+		status = ath9k_hw_set_power_awake(ah, setChip);
+		break;
+	case ATH9K_PM_FULL_SLEEP:
+		ath9k_set_power_sleep(ah, setChip);
+		ahp->ah_chipFullSleep = true;
+		break;
+	case ATH9K_PM_NETWORK_SLEEP:
+		ath9k_set_power_network_sleep(ah, setChip);
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			 "%s: unknown power mode %u\n", __func__, mode);
+		return false;
+	}
+	ahp->ah_powerMode = mode;
+	return status;
+}
+
+static struct ath_hal *ath9k_hw_do_attach(u16 devid,
+					  struct ath_softc *sc,
+					  void __iomem *mem,
+					  int *status)
+{
+	struct ath_hal_5416 *ahp;
+	struct ath_hal *ah;
+	int ecode;
+#ifndef CONFIG_SLOW_ANT_DIV
+	u32 i;
+	u32 j;
+#endif
+
+	ahp = ath9k_hw_newstate(devid, sc, mem, status);
+	if (ahp == NULL)
+		return NULL;
+
+	ah = &ahp->ah;
+
+	ath9k_hw_set_defaults(ah);
+
+	if (ah->ah_config.intr_mitigation != 0)
+		ahp->ah_intrMitigation = true;
+
+	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: couldn't reset chip\n",
+			 __func__);
+		ecode = -EIO;
+		goto bad;
+	}
+
+	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: couldn't wakeup chip\n",
+			 __func__);
+		ecode = -EIO;
+		goto bad;
+	}
+
+	if (ah->ah_config.serialize_regmode == SER_REG_MODE_AUTO) {
+		if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI) {
+			ah->ah_config.serialize_regmode =
+				SER_REG_MODE_ON;
+		} else {
+			ah->ah_config.serialize_regmode =
+				SER_REG_MODE_OFF;
+		}
+	}
+	DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+		"%s: serialize_regmode is %d\n",
+		__func__, ah->ah_config.serialize_regmode);
+
+	if ((ah->ah_macVersion != AR_SREV_VERSION_5416_PCI) &&
+	    (ah->ah_macVersion != AR_SREV_VERSION_5416_PCIE) &&
+	    (ah->ah_macVersion != AR_SREV_VERSION_9160) &&
+	    (!AR_SREV_9100(ah)) && (!AR_SREV_9280(ah))) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			 "%s: Mac Chip Rev 0x%02x.%x is not supported by "
+			 "this driver\n", __func__,
+			 ah->ah_macVersion, ah->ah_macRev);
+		ecode = -EOPNOTSUPP;
+		goto bad;
+	}
+
+	if (AR_SREV_9100(ah)) {
+		ahp->ah_iqCalData.calData = &iq_cal_multi_sample;
+		ahp->ah_suppCals = IQ_MISMATCH_CAL;
+		ah->ah_isPciExpress = false;
+	}
+	ah->ah_phyRev = REG_READ(ah, AR_PHY_CHIP_ID);
+
+	if (AR_SREV_9160_10_OR_LATER(ah)) {
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			ahp->ah_iqCalData.calData = &iq_cal_single_sample;
+			ahp->ah_adcGainCalData.calData =
+				&adc_gain_cal_single_sample;
+			ahp->ah_adcDcCalData.calData =
+				&adc_dc_cal_single_sample;
+			ahp->ah_adcDcCalInitData.calData =
+				&adc_init_dc_cal;
+		} else {
+			ahp->ah_iqCalData.calData = &iq_cal_multi_sample;
+			ahp->ah_adcGainCalData.calData =
+				&adc_gain_cal_multi_sample;
+			ahp->ah_adcDcCalData.calData =
+				&adc_dc_cal_multi_sample;
+			ahp->ah_adcDcCalInitData.calData =
+				&adc_init_dc_cal;
+		}
+		ahp->ah_suppCals =
+			ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
+	}
+
+	if (AR_SREV_9160(ah)) {
+		ah->ah_config.enable_ani = 1;
+		ahp->ah_ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
+					ATH9K_ANI_FIRSTEP_LEVEL);
+	} else {
+		ahp->ah_ani_function = ATH9K_ANI_ALL;
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			ahp->ah_ani_function &=
+				~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
+		}
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+		 "%s: This Mac Chip Rev 0x%02x.%x is \n", __func__,
+		 ah->ah_macVersion, ah->ah_macRev);
+
+	if (AR_SREV_9280_20_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ahp->ah_iniModes, ar9280Modes_9280_2,
+			       ARRAY_SIZE(ar9280Modes_9280_2), 6);
+		INIT_INI_ARRAY(&ahp->ah_iniCommon, ar9280Common_9280_2,
+			       ARRAY_SIZE(ar9280Common_9280_2), 2);
+
+		if (ah->ah_config.pcie_clock_req) {
+			INIT_INI_ARRAY(&ahp->ah_iniPcieSerdes,
+				       ar9280PciePhy_clkreq_off_L1_9280,
+				       ARRAY_SIZE
+				       (ar9280PciePhy_clkreq_off_L1_9280),
+				       2);
+		} else {
+			INIT_INI_ARRAY(&ahp->ah_iniPcieSerdes,
+				       ar9280PciePhy_clkreq_always_on_L1_9280,
+				       ARRAY_SIZE
+				       (ar9280PciePhy_clkreq_always_on_L1_9280),
+				       2);
+		}
+		INIT_INI_ARRAY(&ahp->ah_iniModesAdditional,
+			       ar9280Modes_fast_clock_9280_2,
+			       ARRAY_SIZE(ar9280Modes_fast_clock_9280_2),
+			       3);
+	} else if (AR_SREV_9280_10_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ahp->ah_iniModes, ar9280Modes_9280,
+			       ARRAY_SIZE(ar9280Modes_9280), 6);
+		INIT_INI_ARRAY(&ahp->ah_iniCommon, ar9280Common_9280,
+			       ARRAY_SIZE(ar9280Common_9280), 2);
+	} else if (AR_SREV_9160_10_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ahp->ah_iniModes, ar5416Modes_9160,
+			       ARRAY_SIZE(ar5416Modes_9160), 6);
+		INIT_INI_ARRAY(&ahp->ah_iniCommon, ar5416Common_9160,
+			       ARRAY_SIZE(ar5416Common_9160), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank0, ar5416Bank0_9160,
+			       ARRAY_SIZE(ar5416Bank0_9160), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBB_RfGain, ar5416BB_RfGain_9160,
+			       ARRAY_SIZE(ar5416BB_RfGain_9160), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank1, ar5416Bank1_9160,
+			       ARRAY_SIZE(ar5416Bank1_9160), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank2, ar5416Bank2_9160,
+			       ARRAY_SIZE(ar5416Bank2_9160), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank3, ar5416Bank3_9160,
+			       ARRAY_SIZE(ar5416Bank3_9160), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6, ar5416Bank6_9160,
+			       ARRAY_SIZE(ar5416Bank6_9160), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6TPC, ar5416Bank6TPC_9160,
+			       ARRAY_SIZE(ar5416Bank6TPC_9160), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank7, ar5416Bank7_9160,
+			       ARRAY_SIZE(ar5416Bank7_9160), 2);
+		if (AR_SREV_9160_11(ah)) {
+			INIT_INI_ARRAY(&ahp->ah_iniAddac,
+				       ar5416Addac_91601_1,
+				       ARRAY_SIZE(ar5416Addac_91601_1), 2);
+		} else {
+			INIT_INI_ARRAY(&ahp->ah_iniAddac, ar5416Addac_9160,
+				       ARRAY_SIZE(ar5416Addac_9160), 2);
+		}
+	} else if (AR_SREV_9100_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ahp->ah_iniModes, ar5416Modes_9100,
+			       ARRAY_SIZE(ar5416Modes_9100), 6);
+		INIT_INI_ARRAY(&ahp->ah_iniCommon, ar5416Common_9100,
+			       ARRAY_SIZE(ar5416Common_9100), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank0, ar5416Bank0_9100,
+			       ARRAY_SIZE(ar5416Bank0_9100), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBB_RfGain, ar5416BB_RfGain_9100,
+			       ARRAY_SIZE(ar5416BB_RfGain_9100), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank1, ar5416Bank1_9100,
+			       ARRAY_SIZE(ar5416Bank1_9100), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank2, ar5416Bank2_9100,
+			       ARRAY_SIZE(ar5416Bank2_9100), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank3, ar5416Bank3_9100,
+			       ARRAY_SIZE(ar5416Bank3_9100), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6, ar5416Bank6_9100,
+			       ARRAY_SIZE(ar5416Bank6_9100), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6TPC, ar5416Bank6TPC_9100,
+			       ARRAY_SIZE(ar5416Bank6TPC_9100), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank7, ar5416Bank7_9100,
+			       ARRAY_SIZE(ar5416Bank7_9100), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniAddac, ar5416Addac_9100,
+			       ARRAY_SIZE(ar5416Addac_9100), 2);
+	} else {
+		INIT_INI_ARRAY(&ahp->ah_iniModes, ar5416Modes,
+			       ARRAY_SIZE(ar5416Modes), 6);
+		INIT_INI_ARRAY(&ahp->ah_iniCommon, ar5416Common,
+			       ARRAY_SIZE(ar5416Common), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank0, ar5416Bank0,
+			       ARRAY_SIZE(ar5416Bank0), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBB_RfGain, ar5416BB_RfGain,
+			       ARRAY_SIZE(ar5416BB_RfGain), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank1, ar5416Bank1,
+			       ARRAY_SIZE(ar5416Bank1), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank2, ar5416Bank2,
+			       ARRAY_SIZE(ar5416Bank2), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniBank3, ar5416Bank3,
+			       ARRAY_SIZE(ar5416Bank3), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6, ar5416Bank6,
+			       ARRAY_SIZE(ar5416Bank6), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank6TPC, ar5416Bank6TPC,
+			       ARRAY_SIZE(ar5416Bank6TPC), 3);
+		INIT_INI_ARRAY(&ahp->ah_iniBank7, ar5416Bank7,
+			       ARRAY_SIZE(ar5416Bank7), 2);
+		INIT_INI_ARRAY(&ahp->ah_iniAddac, ar5416Addac,
+			       ARRAY_SIZE(ar5416Addac), 2);
+	}
+
+	if (ah->ah_isPciExpress)
+		ath9k_hw_configpcipowersave(ah, 0);
+	else
+		ar5416DisablePciePhy(ah);
+
+	ecode = ath9k_hw_post_attach(ah);
+	if (ecode != 0)
+		goto bad;
+
+#ifndef CONFIG_SLOW_ANT_DIV
+	if (ah->ah_devid == AR9280_DEVID_PCI) {
+		for (i = 0; i < ahp->ah_iniModes.ia_rows; i++) {
+			u32 reg = INI_RA(&ahp->ah_iniModes, i, 0);
+
+			for (j = 1; j < ahp->ah_iniModes.ia_columns; j++) {
+				u32 val = INI_RA(&ahp->ah_iniModes, i, j);
+
+				INI_RA(&ahp->ah_iniModes, i, j) =
+					ath9k_hw_ini_fixup(ah, &ahp->ah_eeprom,
+							   reg, val);
+			}
+		}
+	}
+#endif
+
+	if (!ath9k_hw_fill_cap_info(ah)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			 "%s:failed ath9k_hw_fill_cap_info\n", __func__);
+		ecode = -EINVAL;
+		goto bad;
+	}
+
+	ecode = ath9k_hw_init_macaddr(ah);
+	if (ecode != 0) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			 "%s: failed initializing mac address\n",
+			 __func__);
+		goto bad;
+	}
+
+	if (AR_SREV_9285(ah))
+		ah->ah_txTrigLevel = (AR_FTRIG_256B >> AR_FTRIG_S);
+	else
+		ah->ah_txTrigLevel = (AR_FTRIG_512B >> AR_FTRIG_S);
+
+#ifndef ATH_NF_PER_CHAN
+
+	ath9k_init_nfcal_hist_buffer(ah);
+#endif
+
+	return ah;
+
+bad:
+	if (ahp)
+		ath9k_hw_detach((struct ath_hal *) ahp);
+	if (status)
+		*status = ecode;
+	return NULL;
+}
+
+void ath9k_hw_detach(struct ath_hal *ah)
+{
+	if (!AR_SREV_9100(ah))
+		ath9k_hw_ani_detach(ah);
+	ath9k_hw_rfdetach(ah);
+
+	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
+	kfree(ah);
+}
+
+bool ath9k_get_channel_edges(struct ath_hal *ah,
+			     u16 flags, u16 *low,
+			     u16 *high)
+{
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+	if (flags & CHANNEL_5GHZ) {
+		*low = pCap->low_5ghz_chan;
+		*high = pCap->high_5ghz_chan;
+		return true;
+	}
+	if ((flags & CHANNEL_2GHZ)) {
+		*low = pCap->low_2ghz_chan;
+		*high = pCap->high_2ghz_chan;
+
+		return true;
+	}
+	return false;
+}
+
+static inline bool ath9k_hw_fill_vpd_table(u8 pwrMin,
+					   u8 pwrMax,
+					   u8 *pPwrList,
+					   u8 *pVpdList,
+					   u16
+					   numIntercepts,
+					   u8 *pRetVpdList)
+{
+	u16 i, k;
+	u8 currPwr = pwrMin;
+	u16 idxL = 0, idxR = 0;
+
+	for (i = 0; i <= (pwrMax - pwrMin) / 2; i++) {
+		ath9k_hw_get_lower_upper_index(currPwr, pPwrList,
+					       numIntercepts, &(idxL),
+					       &(idxR));
+		if (idxR < 1)
+			idxR = 1;
+		if (idxL == numIntercepts - 1)
+			idxL = (u16) (numIntercepts - 2);
+		if (pPwrList[idxL] == pPwrList[idxR])
+			k = pVpdList[idxL];
+		else
+			k = (u16) (((currPwr -
+					   pPwrList[idxL]) *
+					  pVpdList[idxR] +
+					  (pPwrList[idxR] -
+					   currPwr) * pVpdList[idxL]) /
+					 (pPwrList[idxR] -
+					  pPwrList[idxL]));
+		pRetVpdList[i] = (u8) k;
+		currPwr += 2;
+	}
+
+	return true;
+}
+
+static inline void
+ath9k_hw_get_gain_boundaries_pdadcs(struct ath_hal *ah,
+				    struct ath9k_channel *chan,
+				    struct cal_data_per_freq *pRawDataSet,
+				    u8 *bChans,
+				    u16 availPiers,
+				    u16 tPdGainOverlap,
+				    int16_t *pMinCalPower,
+				    u16 *pPdGainBoundaries,
+				    u8 *pPDADCValues,
+				    u16 numXpdGains)
+{
+	int i, j, k;
+	int16_t ss;
+	u16 idxL = 0, idxR = 0, numPiers;
+	static u8 vpdTableL[AR5416_NUM_PD_GAINS]
+		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+	static u8 vpdTableR[AR5416_NUM_PD_GAINS]
+		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+	static u8 vpdTableI[AR5416_NUM_PD_GAINS]
+		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+
+	u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
+	u8 minPwrT4[AR5416_NUM_PD_GAINS];
+	u8 maxPwrT4[AR5416_NUM_PD_GAINS];
+	int16_t vpdStep;
+	int16_t tmpVal;
+	u16 sizeCurrVpdTable, maxIndex, tgtIndex;
+	bool match;
+	int16_t minDelta = 0;
+	struct chan_centers centers;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+
+	for (numPiers = 0; numPiers < availPiers; numPiers++) {
+		if (bChans[numPiers] == AR5416_BCHAN_UNUSED)
+			break;
+	}
+
+	match = ath9k_hw_get_lower_upper_index((u8)
+					       FREQ2FBIN(centers.
+							 synth_center,
+							 IS_CHAN_2GHZ
+							 (chan)), bChans,
+					       numPiers, &idxL, &idxR);
+
+	if (match) {
+		for (i = 0; i < numXpdGains; i++) {
+			minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
+			maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
+			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						pRawDataSet[idxL].
+						pwrPdg[i],
+						pRawDataSet[idxL].
+						vpdPdg[i],
+						AR5416_PD_GAIN_ICEPTS,
+						vpdTableI[i]);
+		}
+	} else {
+		for (i = 0; i < numXpdGains; i++) {
+			pVpdL = pRawDataSet[idxL].vpdPdg[i];
+			pPwrL = pRawDataSet[idxL].pwrPdg[i];
+			pVpdR = pRawDataSet[idxR].vpdPdg[i];
+			pPwrR = pRawDataSet[idxR].pwrPdg[i];
+
+			minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
+
+			maxPwrT4[i] =
+				min(pPwrL[AR5416_PD_GAIN_ICEPTS - 1],
+				    pPwrR[AR5416_PD_GAIN_ICEPTS - 1]);
+
+
+			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						pPwrL, pVpdL,
+						AR5416_PD_GAIN_ICEPTS,
+						vpdTableL[i]);
+			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						pPwrR, pVpdR,
+						AR5416_PD_GAIN_ICEPTS,
+						vpdTableR[i]);
+
+			for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
+				vpdTableI[i][j] =
+					(u8) (ath9k_hw_interpolate
+						    ((u16)
+						     FREQ2FBIN(centers.
+							       synth_center,
+							       IS_CHAN_2GHZ
+							       (chan)),
+						     bChans[idxL],
+						     bChans[idxR], vpdTableL[i]
+						     [j], vpdTableR[i]
+						     [j]));
+			}
+		}
+	}
+
+	*pMinCalPower = (int16_t) (minPwrT4[0] / 2);
+
+	k = 0;
+	for (i = 0; i < numXpdGains; i++) {
+		if (i == (numXpdGains - 1))
+			pPdGainBoundaries[i] =
+				(u16) (maxPwrT4[i] / 2);
+		else
+			pPdGainBoundaries[i] =
+				(u16) ((maxPwrT4[i] +
+					      minPwrT4[i + 1]) / 4);
+
+		pPdGainBoundaries[i] =
+			min((u16) AR5416_MAX_RATE_POWER,
+			    pPdGainBoundaries[i]);
+
+		if ((i == 0) && !AR_SREV_5416_V20_OR_LATER(ah)) {
+			minDelta = pPdGainBoundaries[0] - 23;
+			pPdGainBoundaries[0] = 23;
+		} else {
+			minDelta = 0;
+		}
+
+		if (i == 0) {
+			if (AR_SREV_9280_10_OR_LATER(ah))
+				ss = (int16_t) (0 - (minPwrT4[i] / 2));
+			else
+				ss = 0;
+		} else {
+			ss = (int16_t) ((pPdGainBoundaries[i - 1] -
+					 (minPwrT4[i] / 2)) -
+					tPdGainOverlap + 1 + minDelta);
+		}
+		vpdStep = (int16_t) (vpdTableI[i][1] - vpdTableI[i][0]);
+		vpdStep = (int16_t) ((vpdStep < 1) ? 1 : vpdStep);
+
+		while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+			tmpVal = (int16_t) (vpdTableI[i][0] + ss * vpdStep);
+			pPDADCValues[k++] =
+				(u8) ((tmpVal < 0) ? 0 : tmpVal);
+			ss++;
+		}
+
+		sizeCurrVpdTable =
+			(u8) ((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
+		tgtIndex = (u8) (pPdGainBoundaries[i] + tPdGainOverlap -
+				       (minPwrT4[i] / 2));
+		maxIndex = (tgtIndex <
+			    sizeCurrVpdTable) ? tgtIndex : sizeCurrVpdTable;
+
+		while ((ss < maxIndex)
+		       && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+			pPDADCValues[k++] = vpdTableI[i][ss++];
+		}
+
+		vpdStep = (int16_t) (vpdTableI[i][sizeCurrVpdTable - 1] -
+				     vpdTableI[i][sizeCurrVpdTable - 2]);
+		vpdStep = (int16_t) ((vpdStep < 1) ? 1 : vpdStep);
+
+		if (tgtIndex > maxIndex) {
+			while ((ss <= tgtIndex)
+			       && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+				tmpVal = (int16_t) ((vpdTableI[i]
+						     [sizeCurrVpdTable -
+						      1] + (ss - maxIndex +
+							    1) * vpdStep));
+				pPDADCValues[k++] = (u8) ((tmpVal >
+						 255) ? 255 : tmpVal);
+				ss++;
+			}
+		}
+	}
+
+	while (i < AR5416_PD_GAINS_IN_MASK) {
+		pPdGainBoundaries[i] = pPdGainBoundaries[i - 1];
+		i++;
+	}
+
+	while (k < AR5416_NUM_PDADC_VALUES) {
+		pPDADCValues[k] = pPDADCValues[k - 1];
+		k++;
+	}
+	return;
+}
+
+static inline bool
+ath9k_hw_set_power_cal_table(struct ath_hal *ah,
+			     struct ar5416_eeprom *pEepData,
+			     struct ath9k_channel *chan,
+			     int16_t *pTxPowerIndexOffset)
+{
+	struct cal_data_per_freq *pRawDataset;
+	u8 *pCalBChans = NULL;
+	u16 pdGainOverlap_t2;
+	static u8 pdadcValues[AR5416_NUM_PDADC_VALUES];
+	u16 gainBoundaries[AR5416_PD_GAINS_IN_MASK];
+	u16 numPiers, i, j;
+	int16_t tMinCalPower;
+	u16 numXpdGain, xpdMask;
+	u16 xpdGainValues[AR5416_NUM_PD_GAINS] = { 0, 0, 0, 0 };
+	u32 reg32, regOffset, regChainOffset;
+	int16_t modalIdx;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	modalIdx = IS_CHAN_2GHZ(chan) ? 1 : 0;
+	xpdMask = pEepData->modalHeader[modalIdx].xpdGain;
+
+	if ((pEepData->baseEepHeader.
+	     version & AR5416_EEP_VER_MINOR_MASK) >=
+	    AR5416_EEP_MINOR_VER_2) {
+		pdGainOverlap_t2 =
+			pEepData->modalHeader[modalIdx].pdGainOverlap;
+	} else {
+		pdGainOverlap_t2 =
+			(u16) (MS
+				     (REG_READ(ah, AR_PHY_TPCRG5),
+				      AR_PHY_TPCRG5_PD_GAIN_OVERLAP));
+	}
+
+	if (IS_CHAN_2GHZ(chan)) {
+		pCalBChans = pEepData->calFreqPier2G;
+		numPiers = AR5416_NUM_2G_CAL_PIERS;
+	} else {
+		pCalBChans = pEepData->calFreqPier5G;
+		numPiers = AR5416_NUM_5G_CAL_PIERS;
+	}
+
+	numXpdGain = 0;
+
+	for (i = 1; i <= AR5416_PD_GAINS_IN_MASK; i++) {
+		if ((xpdMask >> (AR5416_PD_GAINS_IN_MASK - i)) & 1) {
+			if (numXpdGain >= AR5416_NUM_PD_GAINS)
+				break;
+			xpdGainValues[numXpdGain] =
+				(u16) (AR5416_PD_GAINS_IN_MASK - i);
+			numXpdGain++;
+		}
+	}
+
+	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
+		      (numXpdGain - 1) & 0x3);
+	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1,
+		      xpdGainValues[0]);
+	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2,
+		      xpdGainValues[1]);
+	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3,
+		      xpdGainValues[2]);
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		if (AR_SREV_5416_V20_OR_LATER(ah) &&
+		    (ahp->ah_rxchainmask == 5 || ahp->ah_txchainmask == 5)
+		    && (i != 0)) {
+			regChainOffset = (i == 1) ? 0x2000 : 0x1000;
+		} else
+			regChainOffset = i * 0x1000;
+		if (pEepData->baseEepHeader.txMask & (1 << i)) {
+			if (IS_CHAN_2GHZ(chan))
+				pRawDataset = pEepData->calPierData2G[i];
+			else
+				pRawDataset = pEepData->calPierData5G[i];
+
+			ath9k_hw_get_gain_boundaries_pdadcs(ah, chan,
+							    pRawDataset,
+							    pCalBChans,
+							    numPiers,
+							    pdGainOverlap_t2,
+							    &tMinCalPower,
+							    gainBoundaries,
+							    pdadcValues,
+							    numXpdGain);
+
+			if ((i == 0) || AR_SREV_5416_V20_OR_LATER(ah)) {
+
+				REG_WRITE(ah,
+					  AR_PHY_TPCRG5 + regChainOffset,
+					  SM(pdGainOverlap_t2,
+					     AR_PHY_TPCRG5_PD_GAIN_OVERLAP)
+					  | SM(gainBoundaries[0],
+					       AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1)
+					  | SM(gainBoundaries[1],
+					       AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2)
+					  | SM(gainBoundaries[2],
+					       AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3)
+					  | SM(gainBoundaries[3],
+				       AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4));
+			}
+
+			regOffset =
+				AR_PHY_BASE + (672 << 2) + regChainOffset;
+			for (j = 0; j < 32; j++) {
+				reg32 =
+					((pdadcValues[4 * j + 0] & 0xFF) << 0)
+					| ((pdadcValues[4 * j + 1] & 0xFF) <<
+					   8) | ((pdadcValues[4 * j + 2] &
+						  0xFF) << 16) |
+					((pdadcValues[4 * j + 3] & 0xFF) <<
+					 24);
+				REG_WRITE(ah, regOffset, reg32);
+
+				DPRINTF(ah->ah_sc, ATH_DBG_PHY_IO,
+					 "PDADC (%d,%4x): %4.4x %8.8x\n",
+					 i, regChainOffset, regOffset,
+					 reg32);
+				DPRINTF(ah->ah_sc, ATH_DBG_PHY_IO,
+				"PDADC: Chain %d | PDADC %3d Value %3d | "
+				"PDADC %3d Value %3d | PDADC %3d Value %3d | "
+				"PDADC %3d Value %3d |\n",
+					 i, 4 * j, pdadcValues[4 * j],
+					 4 * j + 1, pdadcValues[4 * j + 1],
+					 4 * j + 2, pdadcValues[4 * j + 2],
+					 4 * j + 3,
+					 pdadcValues[4 * j + 3]);
+
+				regOffset += 4;
+			}
+		}
+	}
+	*pTxPowerIndexOffset = 0;
+
+	return true;
+}
+
+void ath9k_hw_configpcipowersave(struct ath_hal *ah, int restore)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u8 i;
+
+	if (ah->ah_isPciExpress != true)
+		return;
+
+	if (ah->ah_config.pcie_powersave_enable == 2)
+		return;
+
+	if (restore)
+		return;
+
+	if (AR_SREV_9280_20_OR_LATER(ah)) {
+		for (i = 0; i < ahp->ah_iniPcieSerdes.ia_rows; i++) {
+			REG_WRITE(ah, INI_RA(&ahp->ah_iniPcieSerdes, i, 0),
+				  INI_RA(&ahp->ah_iniPcieSerdes, i, 1));
+		}
+		udelay(1000);
+	} else if (AR_SREV_9280(ah)
+		   && (ah->ah_macRev == AR_SREV_REVISION_9280_10)) {
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+
+		REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
+
+		if (ah->ah_config.pcie_clock_req)
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
+		else
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
+
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
+
+		REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+
+		udelay(1000);
+	} else {
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+		REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
+		REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+	}
+
+	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
+
+	if (ah->ah_config.pcie_waen) {
+		REG_WRITE(ah, AR_WA, ah->ah_config.pcie_waen);
+	} else {
+		if (AR_SREV_9280(ah))
+			REG_WRITE(ah, AR_WA, 0x0040073f);
+		else
+			REG_WRITE(ah, AR_WA, 0x0000073f);
+	}
+}
+
+static inline void
+ath9k_hw_get_legacy_target_powers(struct ath_hal *ah,
+				  struct ath9k_channel *chan,
+				  struct cal_target_power_leg *powInfo,
+				  u16 numChannels,
+				  struct cal_target_power_leg *pNewPower,
+				  u16 numRates,
+				  bool isExtTarget)
+{
+	u16 clo, chi;
+	int i;
+	int matchIndex = -1, lowIndex = -1;
+	u16 freq;
+	struct chan_centers centers;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = (isExtTarget) ? centers.ext_center : centers.ctl_center;
+
+	if (freq <= ath9k_hw_fbin2freq(powInfo[0].bChannel,
+		IS_CHAN_2GHZ(chan))) {
+		matchIndex = 0;
+	} else {
+		for (i = 0; (i < numChannels)
+		     && (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
+			if (freq ==
+			    ath9k_hw_fbin2freq(powInfo[i].bChannel,
+					       IS_CHAN_2GHZ(chan))) {
+				matchIndex = i;
+				break;
+			} else if ((freq <
+				    ath9k_hw_fbin2freq(powInfo[i].bChannel,
+						       IS_CHAN_2GHZ(chan)))
+				   && (freq >
+				       ath9k_hw_fbin2freq(powInfo[i - 1].
+							  bChannel,
+							  IS_CHAN_2GHZ
+							  (chan)))) {
+				lowIndex = i - 1;
+				break;
+			}
+		}
+		if ((matchIndex == -1) && (lowIndex == -1))
+			matchIndex = i - 1;
+	}
+
+	if (matchIndex != -1) {
+		*pNewPower = powInfo[matchIndex];
+	} else {
+		clo = ath9k_hw_fbin2freq(powInfo[lowIndex].bChannel,
+					 IS_CHAN_2GHZ(chan));
+		chi = ath9k_hw_fbin2freq(powInfo[lowIndex + 1].bChannel,
+					 IS_CHAN_2GHZ(chan));
+
+		for (i = 0; i < numRates; i++) {
+			pNewPower->tPow2x[i] =
+				(u8) ath9k_hw_interpolate(freq, clo, chi,
+								powInfo
+								[lowIndex].
+								tPow2x[i],
+								powInfo
+								[lowIndex +
+								 1].tPow2x[i]);
+		}
+	}
+}
+
+static inline void
+ath9k_hw_get_target_powers(struct ath_hal *ah,
+			   struct ath9k_channel *chan,
+			   struct cal_target_power_ht *powInfo,
+			   u16 numChannels,
+			   struct cal_target_power_ht *pNewPower,
+			   u16 numRates,
+			   bool isHt40Target)
+{
+	u16 clo, chi;
+	int i;
+	int matchIndex = -1, lowIndex = -1;
+	u16 freq;
+	struct chan_centers centers;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = isHt40Target ? centers.synth_center : centers.ctl_center;
+
+	if (freq <=
+		ath9k_hw_fbin2freq(powInfo[0].bChannel, IS_CHAN_2GHZ(chan))) {
+		matchIndex = 0;
+	} else {
+		for (i = 0; (i < numChannels)
+		     && (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
+			if (freq ==
+			    ath9k_hw_fbin2freq(powInfo[i].bChannel,
+					       IS_CHAN_2GHZ(chan))) {
+				matchIndex = i;
+				break;
+			} else
+				if ((freq <
+				     ath9k_hw_fbin2freq(powInfo[i].bChannel,
+							IS_CHAN_2GHZ(chan)))
+				    && (freq >
+					ath9k_hw_fbin2freq(powInfo[i - 1].
+							   bChannel,
+							   IS_CHAN_2GHZ
+							   (chan)))) {
+					lowIndex = i - 1;
+					break;
+				}
+		}
+		if ((matchIndex == -1) && (lowIndex == -1))
+			matchIndex = i - 1;
+	}
+
+	if (matchIndex != -1) {
+		*pNewPower = powInfo[matchIndex];
+	} else {
+		clo = ath9k_hw_fbin2freq(powInfo[lowIndex].bChannel,
+					 IS_CHAN_2GHZ(chan));
+		chi = ath9k_hw_fbin2freq(powInfo[lowIndex + 1].bChannel,
+					 IS_CHAN_2GHZ(chan));
+
+		for (i = 0; i < numRates; i++) {
+			pNewPower->tPow2x[i] =
+				(u8) ath9k_hw_interpolate(freq, clo, chi,
+								powInfo
+								[lowIndex].
+								tPow2x[i],
+								powInfo
+								[lowIndex +
+								 1].tPow2x[i]);
+		}
+	}
+}
+
+static inline u16
+ath9k_hw_get_max_edge_power(u16 freq,
+			    struct cal_ctl_edges *pRdEdgesPower,
+			    bool is2GHz)
+{
+	u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+	int i;
+
+	for (i = 0; (i < AR5416_NUM_BAND_EDGES)
+	     && (pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
+		if (freq == ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel,
+					       is2GHz)) {
+			twiceMaxEdgePower = pRdEdgesPower[i].tPower;
+			break;
+		} else if ((i > 0)
+			   && (freq <
+			       ath9k_hw_fbin2freq(pRdEdgesPower[i].
+						  bChannel, is2GHz))) {
+			if (ath9k_hw_fbin2freq
+			    (pRdEdgesPower[i - 1].bChannel, is2GHz) < freq
+			    && pRdEdgesPower[i - 1].flag) {
+				twiceMaxEdgePower =
+					pRdEdgesPower[i - 1].tPower;
+			}
+			break;
+		}
+	}
+	return twiceMaxEdgePower;
+}
+
+static inline bool
+ath9k_hw_set_power_per_rate_table(struct ath_hal *ah,
+				  struct ar5416_eeprom *pEepData,
+				  struct ath9k_channel *chan,
+				  int16_t *ratesArray,
+				  u16 cfgCtl,
+				  u8 AntennaReduction,
+				  u8 twiceMaxRegulatoryPower,
+				  u8 powerLimit)
+{
+	u8 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+	static const u16 tpScaleReductionTable[5] =
+		{ 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+
+	int i;
+	int8_t twiceLargestAntenna;
+	struct cal_ctl_data *rep;
+	struct cal_target_power_leg targetPowerOfdm, targetPowerCck = {
+		0, { 0, 0, 0, 0}
+	};
+	struct cal_target_power_leg targetPowerOfdmExt = {
+		0, { 0, 0, 0, 0} }, targetPowerCckExt = {
+		0, { 0, 0, 0, 0 }
+	};
+	struct cal_target_power_ht targetPowerHt20, targetPowerHt40 = {
+		0, {0, 0, 0, 0}
+	};
+	u8 scaledPower = 0, minCtlPower, maxRegAllowedPower;
+	u16 ctlModesFor11a[] =
+		{ CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 };
+	u16 ctlModesFor11g[] =
+		{ CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
+		  CTL_2GHT40
+		};
+	u16 numCtlModes, *pCtlMode, ctlMode, freq;
+	struct chan_centers centers;
+	int tx_chainmask;
+	u8 twiceMinEdgePower;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	tx_chainmask = ahp->ah_txchainmask;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+
+	twiceLargestAntenna = max(
+		pEepData->modalHeader
+			[IS_CHAN_2GHZ(chan)].antennaGainCh[0],
+		pEepData->modalHeader
+			[IS_CHAN_2GHZ(chan)].antennaGainCh[1]);
+
+	twiceLargestAntenna = max((u8) twiceLargestAntenna,
+		pEepData->modalHeader
+			[IS_CHAN_2GHZ(chan)].antennaGainCh[2]);
+
+	twiceLargestAntenna =
+		(int8_t) min(AntennaReduction - twiceLargestAntenna, 0);
+
+	maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna;
+
+	if (ah->ah_tpScale != ATH9K_TP_SCALE_MAX) {
+		maxRegAllowedPower -=
+			(tpScaleReductionTable[(ah->ah_tpScale)] * 2);
+	}
+
+	scaledPower = min(powerLimit, maxRegAllowedPower);
+
+	switch (ar5416_get_ntxchains(tx_chainmask)) {
+	case 1:
+		break;
+	case 2:
+		scaledPower -=
+			pEepData->modalHeader[IS_CHAN_2GHZ(chan)].
+			pwrDecreaseFor2Chain;
+		break;
+	case 3:
+		scaledPower -=
+			pEepData->modalHeader[IS_CHAN_2GHZ(chan)].
+			pwrDecreaseFor3Chain;
+		break;
+	}
+
+	scaledPower = max(0, (int32_t) scaledPower);
+
+	if (IS_CHAN_2GHZ(chan)) {
+		numCtlModes =
+			ARRAY_SIZE(ctlModesFor11g) -
+			SUB_NUM_CTL_MODES_AT_2G_40;
+		pCtlMode = ctlModesFor11g;
+
+		ath9k_hw_get_legacy_target_powers(ah, chan,
+			pEepData->
+			calTargetPowerCck,
+			AR5416_NUM_2G_CCK_TARGET_POWERS,
+			&targetPowerCck, 4,
+			false);
+		ath9k_hw_get_legacy_target_powers(ah, chan,
+			pEepData->
+			calTargetPower2G,
+			AR5416_NUM_2G_20_TARGET_POWERS,
+			&targetPowerOfdm, 4,
+			false);
+		ath9k_hw_get_target_powers(ah, chan,
+			pEepData->calTargetPower2GHT20,
+			AR5416_NUM_2G_20_TARGET_POWERS,
+			&targetPowerHt20, 8, false);
+
+		if (IS_CHAN_HT40(chan)) {
+			numCtlModes = ARRAY_SIZE(ctlModesFor11g);
+			ath9k_hw_get_target_powers(ah, chan,
+				pEepData->
+				calTargetPower2GHT40,
+				AR5416_NUM_2G_40_TARGET_POWERS,
+				&targetPowerHt40, 8,
+				true);
+			ath9k_hw_get_legacy_target_powers(ah, chan,
+				pEepData->
+				calTargetPowerCck,
+				AR5416_NUM_2G_CCK_TARGET_POWERS,
+				&targetPowerCckExt,
+				4, true);
+			ath9k_hw_get_legacy_target_powers(ah, chan,
+				pEepData->
+				calTargetPower2G,
+				AR5416_NUM_2G_20_TARGET_POWERS,
+				&targetPowerOfdmExt,
+				4, true);
+		}
+	} else {
+
+		numCtlModes =
+			ARRAY_SIZE(ctlModesFor11a) -
+			SUB_NUM_CTL_MODES_AT_5G_40;
+		pCtlMode = ctlModesFor11a;
+
+		ath9k_hw_get_legacy_target_powers(ah, chan,
+			pEepData->
+			calTargetPower5G,
+			AR5416_NUM_5G_20_TARGET_POWERS,
+			&targetPowerOfdm, 4,
+			false);
+		ath9k_hw_get_target_powers(ah, chan,
+			pEepData->calTargetPower5GHT20,
+			AR5416_NUM_5G_20_TARGET_POWERS,
+			&targetPowerHt20, 8, false);
+
+		if (IS_CHAN_HT40(chan)) {
+			numCtlModes = ARRAY_SIZE(ctlModesFor11a);
+			ath9k_hw_get_target_powers(ah, chan,
+				pEepData->
+				calTargetPower5GHT40,
+				AR5416_NUM_5G_40_TARGET_POWERS,
+				&targetPowerHt40, 8,
+				true);
+			ath9k_hw_get_legacy_target_powers(ah, chan,
+				pEepData->
+				calTargetPower5G,
+				AR5416_NUM_5G_20_TARGET_POWERS,
+				&targetPowerOfdmExt,
+				4, true);
+		}
+	}
+
+	for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
+		bool isHt40CtlMode =
+			(pCtlMode[ctlMode] == CTL_5GHT40)
+			|| (pCtlMode[ctlMode] == CTL_2GHT40);
+		if (isHt40CtlMode)
+			freq = centers.synth_center;
+		else if (pCtlMode[ctlMode] & EXT_ADDITIVE)
+			freq = centers.ext_center;
+		else
+			freq = centers.ctl_center;
+
+		if (ar5416_get_eep_ver(ahp) == 14
+		    && ar5416_get_eep_rev(ahp) <= 2)
+			twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+
+		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			"LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
+			"EXT_ADDITIVE %d\n",
+			 ctlMode, numCtlModes, isHt40CtlMode,
+			 (pCtlMode[ctlMode] & EXT_ADDITIVE));
+
+		for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i];
+		     i++) {
+			DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+				"  LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
+				"pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
+				"chan %d\n",
+				i, cfgCtl, pCtlMode[ctlMode],
+				pEepData->ctlIndex[i], chan->channel);
+
+			if ((((cfgCtl & ~CTL_MODE_M) |
+			      (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+			     pEepData->ctlIndex[i])
+			    ||
+			    (((cfgCtl & ~CTL_MODE_M) |
+			      (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+			     ((pEepData->
+			       ctlIndex[i] & CTL_MODE_M) | SD_NO_CTL))) {
+				rep = &(pEepData->ctlData[i]);
+
+				twiceMinEdgePower =
+					ath9k_hw_get_max_edge_power(freq,
+						rep->
+						ctlEdges
+						[ar5416_get_ntxchains
+						(tx_chainmask)
+						- 1],
+						IS_CHAN_2GHZ
+						(chan));
+
+				DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+					"    MATCH-EE_IDX %d: ch %d is2 %d "
+					"2xMinEdge %d chainmask %d chains %d\n",
+					 i, freq, IS_CHAN_2GHZ(chan),
+					 twiceMinEdgePower, tx_chainmask,
+					 ar5416_get_ntxchains
+					 (tx_chainmask));
+				if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) {
+					twiceMaxEdgePower =
+						min(twiceMaxEdgePower,
+						    twiceMinEdgePower);
+				} else {
+					twiceMaxEdgePower =
+						twiceMinEdgePower;
+					break;
+				}
+			}
+		}
+
+		minCtlPower = min(twiceMaxEdgePower, scaledPower);
+
+		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+				"    SEL-Min ctlMode %d pCtlMode %d "
+				"2xMaxEdge %d sP %d minCtlPwr %d\n",
+			 ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
+			 scaledPower, minCtlPower);
+
+		switch (pCtlMode[ctlMode]) {
+		case CTL_11B:
+			for (i = 0; i < ARRAY_SIZE(targetPowerCck.tPow2x);
+			     i++) {
+				targetPowerCck.tPow2x[i] =
+					min(targetPowerCck.tPow2x[i],
+					    minCtlPower);
+			}
+			break;
+		case CTL_11A:
+		case CTL_11G:
+			for (i = 0; i < ARRAY_SIZE(targetPowerOfdm.tPow2x);
+			     i++) {
+				targetPowerOfdm.tPow2x[i] =
+					min(targetPowerOfdm.tPow2x[i],
+					    minCtlPower);
+			}
+			break;
+		case CTL_5GHT20:
+		case CTL_2GHT20:
+			for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x);
+			     i++) {
+				targetPowerHt20.tPow2x[i] =
+					min(targetPowerHt20.tPow2x[i],
+					    minCtlPower);
+			}
+			break;
+		case CTL_11B_EXT:
+			targetPowerCckExt.tPow2x[0] =
+				min(targetPowerCckExt.tPow2x[0], minCtlPower);
+			break;
+		case CTL_11A_EXT:
+		case CTL_11G_EXT:
+			targetPowerOfdmExt.tPow2x[0] =
+				min(targetPowerOfdmExt.tPow2x[0], minCtlPower);
+			break;
+		case CTL_5GHT40:
+		case CTL_2GHT40:
+			for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x);
+			     i++) {
+				targetPowerHt40.tPow2x[i] =
+					min(targetPowerHt40.tPow2x[i],
+					    minCtlPower);
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] =
+		ratesArray[rate18mb] = ratesArray[rate24mb] =
+		targetPowerOfdm.tPow2x[0];
+	ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1];
+	ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2];
+	ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3];
+	ratesArray[rateXr] = targetPowerOfdm.tPow2x[0];
+
+	for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x); i++)
+		ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i];
+
+	if (IS_CHAN_2GHZ(chan)) {
+		ratesArray[rate1l] = targetPowerCck.tPow2x[0];
+		ratesArray[rate2s] = ratesArray[rate2l] =
+			targetPowerCck.tPow2x[1];
+		ratesArray[rate5_5s] = ratesArray[rate5_5l] =
+			targetPowerCck.tPow2x[2];
+		;
+		ratesArray[rate11s] = ratesArray[rate11l] =
+			targetPowerCck.tPow2x[3];
+		;
+	}
+	if (IS_CHAN_HT40(chan)) {
+		for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x); i++) {
+			ratesArray[rateHt40_0 + i] =
+				targetPowerHt40.tPow2x[i];
+		}
+		ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0];
+		ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0];
+		ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0];
+		if (IS_CHAN_2GHZ(chan)) {
+			ratesArray[rateExtCck] =
+				targetPowerCckExt.tPow2x[0];
+		}
+	}
+	return true;
+}
+
+static int
+ath9k_hw_set_txpower(struct ath_hal *ah,
+		     struct ar5416_eeprom *pEepData,
+		     struct ath9k_channel *chan,
+		     u16 cfgCtl,
+		     u8 twiceAntennaReduction,
+		     u8 twiceMaxRegulatoryPower,
+		     u8 powerLimit)
+{
+	struct modal_eep_header *pModal =
+		&(pEepData->modalHeader[IS_CHAN_2GHZ(chan)]);
+	int16_t ratesArray[Ar5416RateSize];
+	int16_t txPowerIndexOffset = 0;
+	u8 ht40PowerIncForPdadc = 2;
+	int i;
+
+	memset(ratesArray, 0, sizeof(ratesArray));
+
+	if ((pEepData->baseEepHeader.
+	     version & AR5416_EEP_VER_MINOR_MASK) >=
+	    AR5416_EEP_MINOR_VER_2) {
+		ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
+	}
+
+	if (!ath9k_hw_set_power_per_rate_table(ah, pEepData, chan,
+					       &ratesArray[0], cfgCtl,
+					       twiceAntennaReduction,
+					       twiceMaxRegulatoryPower,
+					       powerLimit)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			"ath9k_hw_set_txpower: unable to set "
+			"tx power per rate table\n");
+		return -EIO;
+	}
+
+	if (!ath9k_hw_set_power_cal_table
+	    (ah, pEepData, chan, &txPowerIndexOffset)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "ath9k_hw_set_txpower: unable to set power table\n");
+		return -EIO;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
+		ratesArray[i] =
+			(int16_t) (txPowerIndexOffset + ratesArray[i]);
+		if (ratesArray[i] > AR5416_MAX_RATE_POWER)
+			ratesArray[i] = AR5416_MAX_RATE_POWER;
+	}
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		for (i = 0; i < Ar5416RateSize; i++)
+			ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
+	}
+
+	REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
+		  ATH9K_POW_SM(ratesArray[rate18mb], 24)
+		  | ATH9K_POW_SM(ratesArray[rate12mb], 16)
+		  | ATH9K_POW_SM(ratesArray[rate9mb], 8)
+		  | ATH9K_POW_SM(ratesArray[rate6mb], 0)
+		);
+	REG_WRITE(ah, AR_PHY_POWER_TX_RATE2,
+		  ATH9K_POW_SM(ratesArray[rate54mb], 24)
+		  | ATH9K_POW_SM(ratesArray[rate48mb], 16)
+		  | ATH9K_POW_SM(ratesArray[rate36mb], 8)
+		  | ATH9K_POW_SM(ratesArray[rate24mb], 0)
+		);
+
+	if (IS_CHAN_2GHZ(chan)) {
+		REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
+			  ATH9K_POW_SM(ratesArray[rate2s], 24)
+			  | ATH9K_POW_SM(ratesArray[rate2l], 16)
+			  | ATH9K_POW_SM(ratesArray[rateXr], 8)
+			  | ATH9K_POW_SM(ratesArray[rate1l], 0)
+			);
+		REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
+			  ATH9K_POW_SM(ratesArray[rate11s], 24)
+			  | ATH9K_POW_SM(ratesArray[rate11l], 16)
+			  | ATH9K_POW_SM(ratesArray[rate5_5s], 8)
+			  | ATH9K_POW_SM(ratesArray[rate5_5l], 0)
+			);
+	}
+
+	REG_WRITE(ah, AR_PHY_POWER_TX_RATE5,
+		  ATH9K_POW_SM(ratesArray[rateHt20_3], 24)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_2], 16)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_1], 8)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_0], 0)
+		);
+	REG_WRITE(ah, AR_PHY_POWER_TX_RATE6,
+		  ATH9K_POW_SM(ratesArray[rateHt20_7], 24)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_6], 16)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_5], 8)
+		  | ATH9K_POW_SM(ratesArray[rateHt20_4], 0)
+		);
+
+	if (IS_CHAN_HT40(chan)) {
+		REG_WRITE(ah, AR_PHY_POWER_TX_RATE7,
+			  ATH9K_POW_SM(ratesArray[rateHt40_3] +
+				       ht40PowerIncForPdadc, 24)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_2] +
+					 ht40PowerIncForPdadc, 16)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_1] +
+					 ht40PowerIncForPdadc, 8)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_0] +
+					 ht40PowerIncForPdadc, 0)
+			);
+		REG_WRITE(ah, AR_PHY_POWER_TX_RATE8,
+			  ATH9K_POW_SM(ratesArray[rateHt40_7] +
+				       ht40PowerIncForPdadc, 24)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_6] +
+					 ht40PowerIncForPdadc, 16)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_5] +
+					 ht40PowerIncForPdadc, 8)
+			  | ATH9K_POW_SM(ratesArray[rateHt40_4] +
+					 ht40PowerIncForPdadc, 0)
+			);
+
+		REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
+			  ATH9K_POW_SM(ratesArray[rateExtOfdm], 24)
+			  | ATH9K_POW_SM(ratesArray[rateExtCck], 16)
+			  | ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
+			  | ATH9K_POW_SM(ratesArray[rateDupCck], 0)
+			);
+	}
+
+	REG_WRITE(ah, AR_PHY_POWER_TX_SUB,
+		  ATH9K_POW_SM(pModal->pwrDecreaseFor3Chain, 6)
+		  | ATH9K_POW_SM(pModal->pwrDecreaseFor2Chain, 0)
+		);
+
+	i = rate6mb;
+	if (IS_CHAN_HT40(chan))
+		i = rateHt40_0;
+	else if (IS_CHAN_HT20(chan))
+		i = rateHt20_0;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		ah->ah_maxPowerLevel =
+			ratesArray[i] + AR5416_PWR_TABLE_OFFSET * 2;
+	else
+		ah->ah_maxPowerLevel = ratesArray[i];
+
+	return 0;
+}
+
+static inline void ath9k_hw_get_delta_slope_vals(struct ath_hal *ah,
+						 u32 coef_scaled,
+						 u32 *coef_mantissa,
+						 u32 *coef_exponent)
+{
+	u32 coef_exp, coef_man;
+
+	for (coef_exp = 31; coef_exp > 0; coef_exp--)
+		if ((coef_scaled >> coef_exp) & 0x1)
+			break;
+
+	coef_exp = 14 - (coef_exp - COEF_SCALE_S);
+
+	coef_man = coef_scaled + (1 << (COEF_SCALE_S - coef_exp - 1));
+
+	*coef_mantissa = coef_man >> (COEF_SCALE_S - coef_exp);
+	*coef_exponent = coef_exp - 16;
+}
+
+static void
+ath9k_hw_set_delta_slope(struct ath_hal *ah,
+			 struct ath9k_channel *chan)
+{
+	u32 coef_scaled, ds_coef_exp, ds_coef_man;
+	u32 clockMhzScaled = 0x64000000;
+	struct chan_centers centers;
+
+	if (IS_CHAN_HALF_RATE(chan))
+		clockMhzScaled = clockMhzScaled >> 1;
+	else if (IS_CHAN_QUARTER_RATE(chan))
+		clockMhzScaled = clockMhzScaled >> 2;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	coef_scaled = clockMhzScaled / centers.synth_center;
+
+	ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
+				      &ds_coef_exp);
+
+	REG_RMW_FIELD(ah, AR_PHY_TIMING3,
+		      AR_PHY_TIMING3_DSC_MAN, ds_coef_man);
+	REG_RMW_FIELD(ah, AR_PHY_TIMING3,
+		      AR_PHY_TIMING3_DSC_EXP, ds_coef_exp);
+
+	coef_scaled = (9 * coef_scaled) / 10;
+
+	ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
+				      &ds_coef_exp);
+
+	REG_RMW_FIELD(ah, AR_PHY_HALFGI,
+		      AR_PHY_HALFGI_DSC_MAN, ds_coef_man);
+	REG_RMW_FIELD(ah, AR_PHY_HALFGI,
+		      AR_PHY_HALFGI_DSC_EXP, ds_coef_exp);
+}
+
+static void ath9k_hw_9280_spur_mitigate(struct ath_hal *ah,
+					struct ath9k_channel *chan)
+{
+	int bb_spur = AR_NO_SPUR;
+	int freq;
+	int bin, cur_bin;
+	int bb_spur_off, spur_subchannel_sd;
+	int spur_freq_sd;
+	int spur_delta_phase;
+	int denominator;
+	int upper, lower, cur_vit_mask;
+	int tmp, newVal;
+	int i;
+	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
+			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
+	};
+	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
+			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
+	};
+	int inc[4] = { 0, 100, 0, 0 };
+	struct chan_centers centers;
+
+	int8_t mask_m[123];
+	int8_t mask_p[123];
+	int8_t mask_amt;
+	int tmp_mask;
+	int cur_bb_spur;
+	bool is2GHz = IS_CHAN_2GHZ(chan);
+
+	memset(&mask_m, 0, sizeof(int8_t) * 123);
+	memset(&mask_p, 0, sizeof(int8_t) * 123);
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	ah->ah_config.spurmode = SPUR_ENABLE_EEPROM;
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		cur_bb_spur = ath9k_hw_eeprom_get_spur_chan(ah, i, is2GHz);
+
+		if (is2GHz)
+			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ;
+		else
+			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ;
+
+		if (AR_NO_SPUR == cur_bb_spur)
+			break;
+		cur_bb_spur = cur_bb_spur - freq;
+
+		if (IS_CHAN_HT40(chan)) {
+			if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) &&
+			    (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) {
+				bb_spur = cur_bb_spur;
+				break;
+			}
+		} else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) &&
+			   (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) {
+			bb_spur = cur_bb_spur;
+			break;
+		}
+	}
+
+	if (AR_NO_SPUR == bb_spur) {
+		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
+			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
+		return;
+	} else {
+		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
+			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
+	}
+
+	bin = bb_spur * 320;
+
+	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
+
+	newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
+			AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
+			AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
+			AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
+	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal);
+
+	newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
+		  AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
+		  AR_PHY_SPUR_REG_MASK_RATE_SELECT |
+		  AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
+		  SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
+	REG_WRITE(ah, AR_PHY_SPUR_REG, newVal);
+
+	if (IS_CHAN_HT40(chan)) {
+		if (bb_spur < 0) {
+			spur_subchannel_sd = 1;
+			bb_spur_off = bb_spur + 10;
+		} else {
+			spur_subchannel_sd = 0;
+			bb_spur_off = bb_spur - 10;
+		}
+	} else {
+		spur_subchannel_sd = 0;
+		bb_spur_off = bb_spur;
+	}
+
+	if (IS_CHAN_HT40(chan))
+		spur_delta_phase =
+			((bb_spur * 262144) /
+			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+	else
+		spur_delta_phase =
+			((bb_spur * 524288) /
+			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+
+	denominator = IS_CHAN_2GHZ(chan) ? 44 : 40;
+	spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff;
+
+	newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
+		  SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
+		  SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
+	REG_WRITE(ah, AR_PHY_TIMING11, newVal);
+
+	newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S;
+	REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal);
+
+	cur_bin = -6000;
+	upper = bin + 100;
+	lower = bin - 100;
+
+	for (i = 0; i < 4; i++) {
+		int pilot_mask = 0;
+		int chan_mask = 0;
+		int bp = 0;
+		for (bp = 0; bp < 30; bp++) {
+			if ((cur_bin > lower) && (cur_bin < upper)) {
+				pilot_mask = pilot_mask | 0x1 << bp;
+				chan_mask = chan_mask | 0x1 << bp;
+			}
+			cur_bin += 100;
+		}
+		cur_bin += inc[i];
+		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
+		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
+	}
+
+	cur_vit_mask = 6100;
+	upper = bin + 120;
+	lower = bin - 120;
+
+	for (i = 0; i < 123; i++) {
+		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
+
+			/* workaround for gcc bug #37014 */
+			volatile int tmp = abs(cur_vit_mask - bin);
+
+			if (tmp < 75)
+				mask_amt = 1;
+			else
+				mask_amt = 0;
+			if (cur_vit_mask < 0)
+				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
+			else
+				mask_p[cur_vit_mask / 100] = mask_amt;
+		}
+		cur_vit_mask -= 100;
+	}
+
+	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
+		| (mask_m[48] << 26) | (mask_m[49] << 24)
+		| (mask_m[50] << 22) | (mask_m[51] << 20)
+		| (mask_m[52] << 18) | (mask_m[53] << 16)
+		| (mask_m[54] << 14) | (mask_m[55] << 12)
+		| (mask_m[56] << 10) | (mask_m[57] << 8)
+		| (mask_m[58] << 6) | (mask_m[59] << 4)
+		| (mask_m[60] << 2) | (mask_m[61] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
+
+	tmp_mask = (mask_m[31] << 28)
+		| (mask_m[32] << 26) | (mask_m[33] << 24)
+		| (mask_m[34] << 22) | (mask_m[35] << 20)
+		| (mask_m[36] << 18) | (mask_m[37] << 16)
+		| (mask_m[48] << 14) | (mask_m[39] << 12)
+		| (mask_m[40] << 10) | (mask_m[41] << 8)
+		| (mask_m[42] << 6) | (mask_m[43] << 4)
+		| (mask_m[44] << 2) | (mask_m[45] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
+
+	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
+		| (mask_m[18] << 26) | (mask_m[18] << 24)
+		| (mask_m[20] << 22) | (mask_m[20] << 20)
+		| (mask_m[22] << 18) | (mask_m[22] << 16)
+		| (mask_m[24] << 14) | (mask_m[24] << 12)
+		| (mask_m[25] << 10) | (mask_m[26] << 8)
+		| (mask_m[27] << 6) | (mask_m[28] << 4)
+		| (mask_m[29] << 2) | (mask_m[30] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
+
+	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
+		| (mask_m[2] << 26) | (mask_m[3] << 24)
+		| (mask_m[4] << 22) | (mask_m[5] << 20)
+		| (mask_m[6] << 18) | (mask_m[7] << 16)
+		| (mask_m[8] << 14) | (mask_m[9] << 12)
+		| (mask_m[10] << 10) | (mask_m[11] << 8)
+		| (mask_m[12] << 6) | (mask_m[13] << 4)
+		| (mask_m[14] << 2) | (mask_m[15] << 0);
+	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
+
+	tmp_mask = (mask_p[15] << 28)
+		| (mask_p[14] << 26) | (mask_p[13] << 24)
+		| (mask_p[12] << 22) | (mask_p[11] << 20)
+		| (mask_p[10] << 18) | (mask_p[9] << 16)
+		| (mask_p[8] << 14) | (mask_p[7] << 12)
+		| (mask_p[6] << 10) | (mask_p[5] << 8)
+		| (mask_p[4] << 6) | (mask_p[3] << 4)
+		| (mask_p[2] << 2) | (mask_p[1] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
+
+	tmp_mask = (mask_p[30] << 28)
+		| (mask_p[29] << 26) | (mask_p[28] << 24)
+		| (mask_p[27] << 22) | (mask_p[26] << 20)
+		| (mask_p[25] << 18) | (mask_p[24] << 16)
+		| (mask_p[23] << 14) | (mask_p[22] << 12)
+		| (mask_p[21] << 10) | (mask_p[20] << 8)
+		| (mask_p[19] << 6) | (mask_p[18] << 4)
+		| (mask_p[17] << 2) | (mask_p[16] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
+
+	tmp_mask = (mask_p[45] << 28)
+		| (mask_p[44] << 26) | (mask_p[43] << 24)
+		| (mask_p[42] << 22) | (mask_p[41] << 20)
+		| (mask_p[40] << 18) | (mask_p[39] << 16)
+		| (mask_p[38] << 14) | (mask_p[37] << 12)
+		| (mask_p[36] << 10) | (mask_p[35] << 8)
+		| (mask_p[34] << 6) | (mask_p[33] << 4)
+		| (mask_p[32] << 2) | (mask_p[31] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
+
+	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
+		| (mask_p[59] << 26) | (mask_p[58] << 24)
+		| (mask_p[57] << 22) | (mask_p[56] << 20)
+		| (mask_p[55] << 18) | (mask_p[54] << 16)
+		| (mask_p[53] << 14) | (mask_p[52] << 12)
+		| (mask_p[51] << 10) | (mask_p[50] << 8)
+		| (mask_p[49] << 6) | (mask_p[48] << 4)
+		| (mask_p[47] << 2) | (mask_p[46] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
+}
+
+static void ath9k_hw_spur_mitigate(struct ath_hal *ah,
+				   struct ath9k_channel *chan)
+{
+	int bb_spur = AR_NO_SPUR;
+	int bin, cur_bin;
+	int spur_freq_sd;
+	int spur_delta_phase;
+	int denominator;
+	int upper, lower, cur_vit_mask;
+	int tmp, new;
+	int i;
+	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
+			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
+	};
+	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
+			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
+	};
+	int inc[4] = { 0, 100, 0, 0 };
+
+	int8_t mask_m[123];
+	int8_t mask_p[123];
+	int8_t mask_amt;
+	int tmp_mask;
+	int cur_bb_spur;
+	bool is2GHz = IS_CHAN_2GHZ(chan);
+
+	memset(&mask_m, 0, sizeof(int8_t) * 123);
+	memset(&mask_p, 0, sizeof(int8_t) * 123);
+
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		cur_bb_spur = ath9k_hw_eeprom_get_spur_chan(ah, i, is2GHz);
+		if (AR_NO_SPUR == cur_bb_spur)
+			break;
+		cur_bb_spur = cur_bb_spur - (chan->channel * 10);
+		if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) {
+			bb_spur = cur_bb_spur;
+			break;
+		}
+	}
+
+	if (AR_NO_SPUR == bb_spur)
+		return;
+
+	bin = bb_spur * 32;
+
+	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
+	new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
+		     AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
+		     AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
+		     AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
+
+	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new);
+
+	new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
+	       AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
+	       AR_PHY_SPUR_REG_MASK_RATE_SELECT |
+	       AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
+	       SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
+	REG_WRITE(ah, AR_PHY_SPUR_REG, new);
+
+	spur_delta_phase = ((bb_spur * 524288) / 100) &
+		AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+
+	denominator = IS_CHAN_2GHZ(chan) ? 440 : 400;
+	spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff;
+
+	new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
+	       SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
+	       SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
+	REG_WRITE(ah, AR_PHY_TIMING11, new);
+
+	cur_bin = -6000;
+	upper = bin + 100;
+	lower = bin - 100;
+
+	for (i = 0; i < 4; i++) {
+		int pilot_mask = 0;
+		int chan_mask = 0;
+		int bp = 0;
+		for (bp = 0; bp < 30; bp++) {
+			if ((cur_bin > lower) && (cur_bin < upper)) {
+				pilot_mask = pilot_mask | 0x1 << bp;
+				chan_mask = chan_mask | 0x1 << bp;
+			}
+			cur_bin += 100;
+		}
+		cur_bin += inc[i];
+		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
+		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
+	}
+
+	cur_vit_mask = 6100;
+	upper = bin + 120;
+	lower = bin - 120;
+
+	for (i = 0; i < 123; i++) {
+		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
+
+			/* workaround for gcc bug #37014 */
+			volatile int tmp = abs(cur_vit_mask - bin);
+
+			if (tmp < 75)
+				mask_amt = 1;
+			else
+				mask_amt = 0;
+			if (cur_vit_mask < 0)
+				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
+			else
+				mask_p[cur_vit_mask / 100] = mask_amt;
+		}
+		cur_vit_mask -= 100;
+	}
+
+	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
+		| (mask_m[48] << 26) | (mask_m[49] << 24)
+		| (mask_m[50] << 22) | (mask_m[51] << 20)
+		| (mask_m[52] << 18) | (mask_m[53] << 16)
+		| (mask_m[54] << 14) | (mask_m[55] << 12)
+		| (mask_m[56] << 10) | (mask_m[57] << 8)
+		| (mask_m[58] << 6) | (mask_m[59] << 4)
+		| (mask_m[60] << 2) | (mask_m[61] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
+
+	tmp_mask = (mask_m[31] << 28)
+		| (mask_m[32] << 26) | (mask_m[33] << 24)
+		| (mask_m[34] << 22) | (mask_m[35] << 20)
+		| (mask_m[36] << 18) | (mask_m[37] << 16)
+		| (mask_m[48] << 14) | (mask_m[39] << 12)
+		| (mask_m[40] << 10) | (mask_m[41] << 8)
+		| (mask_m[42] << 6) | (mask_m[43] << 4)
+		| (mask_m[44] << 2) | (mask_m[45] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
+
+	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
+		| (mask_m[18] << 26) | (mask_m[18] << 24)
+		| (mask_m[20] << 22) | (mask_m[20] << 20)
+		| (mask_m[22] << 18) | (mask_m[22] << 16)
+		| (mask_m[24] << 14) | (mask_m[24] << 12)
+		| (mask_m[25] << 10) | (mask_m[26] << 8)
+		| (mask_m[27] << 6) | (mask_m[28] << 4)
+		| (mask_m[29] << 2) | (mask_m[30] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
+
+	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
+		| (mask_m[2] << 26) | (mask_m[3] << 24)
+		| (mask_m[4] << 22) | (mask_m[5] << 20)
+		| (mask_m[6] << 18) | (mask_m[7] << 16)
+		| (mask_m[8] << 14) | (mask_m[9] << 12)
+		| (mask_m[10] << 10) | (mask_m[11] << 8)
+		| (mask_m[12] << 6) | (mask_m[13] << 4)
+		| (mask_m[14] << 2) | (mask_m[15] << 0);
+	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
+
+	tmp_mask = (mask_p[15] << 28)
+		| (mask_p[14] << 26) | (mask_p[13] << 24)
+		| (mask_p[12] << 22) | (mask_p[11] << 20)
+		| (mask_p[10] << 18) | (mask_p[9] << 16)
+		| (mask_p[8] << 14) | (mask_p[7] << 12)
+		| (mask_p[6] << 10) | (mask_p[5] << 8)
+		| (mask_p[4] << 6) | (mask_p[3] << 4)
+		| (mask_p[2] << 2) | (mask_p[1] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
+
+	tmp_mask = (mask_p[30] << 28)
+		| (mask_p[29] << 26) | (mask_p[28] << 24)
+		| (mask_p[27] << 22) | (mask_p[26] << 20)
+		| (mask_p[25] << 18) | (mask_p[24] << 16)
+		| (mask_p[23] << 14) | (mask_p[22] << 12)
+		| (mask_p[21] << 10) | (mask_p[20] << 8)
+		| (mask_p[19] << 6) | (mask_p[18] << 4)
+		| (mask_p[17] << 2) | (mask_p[16] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
+
+	tmp_mask = (mask_p[45] << 28)
+		| (mask_p[44] << 26) | (mask_p[43] << 24)
+		| (mask_p[42] << 22) | (mask_p[41] << 20)
+		| (mask_p[40] << 18) | (mask_p[39] << 16)
+		| (mask_p[38] << 14) | (mask_p[37] << 12)
+		| (mask_p[36] << 10) | (mask_p[35] << 8)
+		| (mask_p[34] << 6) | (mask_p[33] << 4)
+		| (mask_p[32] << 2) | (mask_p[31] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
+
+	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
+		| (mask_p[59] << 26) | (mask_p[58] << 24)
+		| (mask_p[57] << 22) | (mask_p[56] << 20)
+		| (mask_p[55] << 18) | (mask_p[54] << 16)
+		| (mask_p[53] << 14) | (mask_p[52] << 12)
+		| (mask_p[51] << 10) | (mask_p[50] << 8)
+		| (mask_p[49] << 6) | (mask_p[48] << 4)
+		| (mask_p[47] << 2) | (mask_p[46] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
+}
+
+static inline void ath9k_hw_init_chain_masks(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int rx_chainmask, tx_chainmask;
+
+	rx_chainmask = ahp->ah_rxchainmask;
+	tx_chainmask = ahp->ah_txchainmask;
+
+	switch (rx_chainmask) {
+	case 0x5:
+		REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
+			    AR_PHY_SWAP_ALT_CHAIN);
+	case 0x3:
+		if (((ah)->ah_macVersion <= AR_SREV_VERSION_9160)) {
+			REG_WRITE(ah, AR_PHY_RX_CHAINMASK, 0x7);
+			REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, 0x7);
+			break;
+		}
+	case 0x1:
+	case 0x2:
+		if (!AR_SREV_9280(ah))
+			break;
+	case 0x7:
+		REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx_chainmask);
+		REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx_chainmask);
+		break;
+	default:
+		break;
+	}
+
+	REG_WRITE(ah, AR_SELFGEN_MASK, tx_chainmask);
+	if (tx_chainmask == 0x5) {
+		REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
+			    AR_PHY_SWAP_ALT_CHAIN);
+	}
+	if (AR_SREV_9100(ah))
+		REG_WRITE(ah, AR_PHY_ANALOG_SWAP,
+			  REG_READ(ah, AR_PHY_ANALOG_SWAP) | 0x00000001);
+}
+
+static void ath9k_hw_set_addac(struct ath_hal *ah,
+			       struct ath9k_channel *chan)
+{
+	struct modal_eep_header *pModal;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ar5416_eeprom *eep = &ahp->ah_eeprom;
+	u8 biaslevel;
+
+	if (ah->ah_macVersion != AR_SREV_VERSION_9160)
+		return;
+
+	if (ar5416_get_eep_rev(ahp) < AR5416_EEP_MINOR_VER_7)
+		return;
+
+	pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
+
+	if (pModal->xpaBiasLvl != 0xff) {
+		biaslevel = pModal->xpaBiasLvl;
+	} else {
+
+		u16 resetFreqBin, freqBin, freqCount = 0;
+		struct chan_centers centers;
+
+		ath9k_hw_get_channel_centers(ah, chan, &centers);
+
+		resetFreqBin =
+			FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan));
+		freqBin = pModal->xpaBiasLvlFreq[0] & 0xff;
+		biaslevel = (u8) (pModal->xpaBiasLvlFreq[0] >> 14);
+
+		freqCount++;
+
+		while (freqCount < 3) {
+			if (pModal->xpaBiasLvlFreq[freqCount] == 0x0)
+				break;
+
+			freqBin = pModal->xpaBiasLvlFreq[freqCount] & 0xff;
+			if (resetFreqBin >= freqBin) {
+				biaslevel =
+					(u8) (pModal->
+						    xpaBiasLvlFreq[freqCount]
+						    >> 14);
+			} else {
+				break;
+			}
+			freqCount++;
+		}
+	}
+
+	if (IS_CHAN_2GHZ(chan)) {
+		INI_RA(&ahp->ah_iniAddac, 7, 1) =
+			(INI_RA(&ahp->ah_iniAddac, 7, 1) & (~0x18)) | biaslevel
+			<< 3;
+	} else {
+		INI_RA(&ahp->ah_iniAddac, 6, 1) =
+			(INI_RA(&ahp->ah_iniAddac, 6, 1) & (~0xc0)) | biaslevel
+			<< 6;
+	}
+}
+
+static u32 ath9k_hw_mac_usec(struct ath_hal *ah, u32 clks)
+{
+	if (ah->ah_curchan != NULL)
+		return clks /
+		CLOCK_RATE[ath9k_hw_chan2wmode(ah, ah->ah_curchan)];
+	else
+		return clks / CLOCK_RATE[ATH9K_MODE_11B];
+}
+
+static u32 ath9k_hw_mac_to_usec(struct ath_hal *ah, u32 clks)
+{
+	struct ath9k_channel *chan = ah->ah_curchan;
+
+	if (chan && IS_CHAN_HT40(chan))
+		return ath9k_hw_mac_usec(ah, clks) / 2;
+	else
+		return ath9k_hw_mac_usec(ah, clks);
+}
+
+static u32 ath9k_hw_mac_clks(struct ath_hal *ah, u32 usecs)
+{
+	if (ah->ah_curchan != NULL)
+		return usecs * CLOCK_RATE[ath9k_hw_chan2wmode(ah,
+			ah->ah_curchan)];
+	else
+		return usecs * CLOCK_RATE[ATH9K_MODE_11B];
+}
+
+static u32 ath9k_hw_mac_to_clks(struct ath_hal *ah, u32 usecs)
+{
+	struct ath9k_channel *chan = ah->ah_curchan;
+
+	if (chan && IS_CHAN_HT40(chan))
+		return ath9k_hw_mac_clks(ah, usecs) * 2;
+	else
+		return ath9k_hw_mac_clks(ah, usecs);
+}
+
+static bool ath9k_hw_set_ack_timeout(struct ath_hal *ah, u32 us)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_ACK))) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: bad ack timeout %u\n",
+			 __func__, us);
+		ahp->ah_acktimeout = (u32) -1;
+		return false;
+	} else {
+		REG_RMW_FIELD(ah, AR_TIME_OUT,
+			      AR_TIME_OUT_ACK, ath9k_hw_mac_to_clks(ah, us));
+		ahp->ah_acktimeout = us;
+		return true;
+	}
+}
+
+static bool ath9k_hw_set_cts_timeout(struct ath_hal *ah, u32 us)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_CTS))) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: bad cts timeout %u\n",
+			 __func__, us);
+		ahp->ah_ctstimeout = (u32) -1;
+		return false;
+	} else {
+		REG_RMW_FIELD(ah, AR_TIME_OUT,
+			      AR_TIME_OUT_CTS, ath9k_hw_mac_to_clks(ah, us));
+		ahp->ah_ctstimeout = us;
+		return true;
+	}
+}
+static bool ath9k_hw_set_global_txtimeout(struct ath_hal *ah,
+					  u32 tu)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (tu > 0xFFFF) {
+		DPRINTF(ah->ah_sc, ATH_DBG_XMIT,
+			"%s: bad global tx timeout %u\n", __func__, tu);
+		ahp->ah_globaltxtimeout = (u32) -1;
+		return false;
+	} else {
+		REG_RMW_FIELD(ah, AR_GTXTO, AR_GTXTO_TIMEOUT_LIMIT, tu);
+		ahp->ah_globaltxtimeout = tu;
+		return true;
+	}
+}
+
+bool ath9k_hw_setslottime(struct ath_hal *ah, u32 us)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (us < ATH9K_SLOT_TIME_9 || us > ath9k_hw_mac_to_usec(ah, 0xffff)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: bad slot time %u\n",
+			 __func__, us);
+		ahp->ah_slottime = (u32) -1;
+		return false;
+	} else {
+		REG_WRITE(ah, AR_D_GBL_IFS_SLOT, ath9k_hw_mac_to_clks(ah, us));
+		ahp->ah_slottime = us;
+		return true;
+	}
+}
+
+static inline void ath9k_hw_init_user_settings(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_RESET, "--AP %s ahp->ah_miscMode 0x%x\n",
+		 __func__, ahp->ah_miscMode);
+	if (ahp->ah_miscMode != 0)
+		REG_WRITE(ah, AR_PCU_MISC,
+			  REG_READ(ah, AR_PCU_MISC) | ahp->ah_miscMode);
+	if (ahp->ah_slottime != (u32) -1)
+		ath9k_hw_setslottime(ah, ahp->ah_slottime);
+	if (ahp->ah_acktimeout != (u32) -1)
+		ath9k_hw_set_ack_timeout(ah, ahp->ah_acktimeout);
+	if (ahp->ah_ctstimeout != (u32) -1)
+		ath9k_hw_set_cts_timeout(ah, ahp->ah_ctstimeout);
+	if (ahp->ah_globaltxtimeout != (u32) -1)
+		ath9k_hw_set_global_txtimeout(ah, ahp->ah_globaltxtimeout);
+}
+
+static inline int
+ath9k_hw_process_ini(struct ath_hal *ah,
+		     struct ath9k_channel *chan,
+		     enum ath9k_ht_macmode macmode)
+{
+	int i, regWrites = 0;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 modesIndex, freqIndex;
+	int status;
+
+	switch (chan->chanmode) {
+	case CHANNEL_A:
+	case CHANNEL_A_HT20:
+		modesIndex = 1;
+		freqIndex = 1;
+		break;
+	case CHANNEL_A_HT40PLUS:
+	case CHANNEL_A_HT40MINUS:
+		modesIndex = 2;
+		freqIndex = 1;
+		break;
+	case CHANNEL_G:
+	case CHANNEL_G_HT20:
+	case CHANNEL_B:
+		modesIndex = 4;
+		freqIndex = 2;
+		break;
+	case CHANNEL_G_HT40PLUS:
+	case CHANNEL_G_HT40MINUS:
+		modesIndex = 3;
+		freqIndex = 2;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	REG_WRITE(ah, AR_PHY(0), 0x00000007);
+
+	REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_EXTERNAL_RADIO);
+
+	ath9k_hw_set_addac(ah, chan);
+
+	if (AR_SREV_5416_V22_OR_LATER(ah)) {
+		REG_WRITE_ARRAY(&ahp->ah_iniAddac, 1, regWrites);
+	} else {
+		struct ar5416IniArray temp;
+		u32 addacSize =
+			sizeof(u32) * ahp->ah_iniAddac.ia_rows *
+			ahp->ah_iniAddac.ia_columns;
+
+		memcpy(ahp->ah_addac5416_21,
+		       ahp->ah_iniAddac.ia_array, addacSize);
+
+		(ahp->ah_addac5416_21)[31 *
+				       ahp->ah_iniAddac.ia_columns + 1] = 0;
+
+		temp.ia_array = ahp->ah_addac5416_21;
+		temp.ia_columns = ahp->ah_iniAddac.ia_columns;
+		temp.ia_rows = ahp->ah_iniAddac.ia_rows;
+		REG_WRITE_ARRAY(&temp, 1, regWrites);
+	}
+	REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC);
+
+	for (i = 0; i < ahp->ah_iniModes.ia_rows; i++) {
+		u32 reg = INI_RA(&ahp->ah_iniModes, i, 0);
+		u32 val = INI_RA(&ahp->ah_iniModes, i, modesIndex);
+
+#ifdef CONFIG_SLOW_ANT_DIV
+		if (ah->ah_devid == AR9280_DEVID_PCI)
+			val = ath9k_hw_ini_fixup(ah, &ahp->ah_eeprom, reg,
+						 val);
+#endif
+
+		REG_WRITE(ah, reg, val);
+
+		if (reg >= 0x7800 && reg < 0x78a0
+		    && ah->ah_config.analog_shiftreg) {
+			udelay(100);
+		}
+
+		DO_DELAY(regWrites);
+	}
+
+	for (i = 0; i < ahp->ah_iniCommon.ia_rows; i++) {
+		u32 reg = INI_RA(&ahp->ah_iniCommon, i, 0);
+		u32 val = INI_RA(&ahp->ah_iniCommon, i, 1);
+
+		REG_WRITE(ah, reg, val);
+
+		if (reg >= 0x7800 && reg < 0x78a0
+		    && ah->ah_config.analog_shiftreg) {
+			udelay(100);
+		}
+
+		DO_DELAY(regWrites);
+	}
+
+	ath9k_hw_write_regs(ah, modesIndex, freqIndex, regWrites);
+
+	if (AR_SREV_9280_20(ah) && IS_CHAN_A_5MHZ_SPACED(chan)) {
+		REG_WRITE_ARRAY(&ahp->ah_iniModesAdditional, modesIndex,
+				regWrites);
+	}
+
+	ath9k_hw_override_ini(ah, chan);
+	ath9k_hw_set_regs(ah, chan, macmode);
+	ath9k_hw_init_chain_masks(ah);
+
+	status = ath9k_hw_set_txpower(ah, &ahp->ah_eeprom, chan,
+				      ath9k_regd_get_ctl(ah, chan),
+				      ath9k_regd_get_antenna_allowed(ah,
+								     chan),
+				      chan->maxRegTxPower * 2,
+				      min((u32) MAX_RATE_POWER,
+					  (u32) ah->ah_powerLimit));
+	if (status != 0) {
+		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			 "%s: error init'ing transmit power\n", __func__);
+		return -EIO;
+	}
+
+	if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+			 "%s: ar5416SetRfRegs failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static inline void ath9k_hw_setup_calibration(struct ath_hal *ah,
+					      struct hal_cal_list *currCal)
+{
+	REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0),
+		      AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX,
+		      currCal->calData->calCountMax);
+
+	switch (currCal->calData->calType) {
+	case IQ_MISMATCH_CAL:
+		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: starting IQ Mismatch Calibration\n",
+			 __func__);
+		break;
+	case ADC_GAIN_CAL:
+		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_GAIN);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: starting ADC Gain Calibration\n", __func__);
+		break;
+	case ADC_DC_CAL:
+		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_PER);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: starting ADC DC Calibration\n", __func__);
+		break;
+	case ADC_DC_INIT_CAL:
+		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_INIT);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: starting Init ADC DC Calibration\n",
+			 __func__);
+		break;
+	}
+
+	REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4(0),
+		    AR_PHY_TIMING_CTRL4_DO_CAL);
+}
+
+static inline void ath9k_hw_reset_calibration(struct ath_hal *ah,
+					      struct hal_cal_list *currCal)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	ath9k_hw_setup_calibration(ah, currCal);
+
+	currCal->calState = CAL_RUNNING;
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		ahp->ah_Meas0.sign[i] = 0;
+		ahp->ah_Meas1.sign[i] = 0;
+		ahp->ah_Meas2.sign[i] = 0;
+		ahp->ah_Meas3.sign[i] = 0;
+	}
+
+	ahp->ah_CalSamples = 0;
+}
+
+static inline void
+ath9k_hw_per_calibration(struct ath_hal *ah,
+			 struct ath9k_channel *ichan,
+			 u8 rxchainmask,
+			 struct hal_cal_list *currCal,
+			 bool *isCalDone)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	*isCalDone = false;
+
+	if (currCal->calState == CAL_RUNNING) {
+		if (!(REG_READ(ah,
+			       AR_PHY_TIMING_CTRL4(0)) &
+		      AR_PHY_TIMING_CTRL4_DO_CAL)) {
+
+			currCal->calData->calCollect(ah);
+
+			ahp->ah_CalSamples++;
+
+			if (ahp->ah_CalSamples >=
+			    currCal->calData->calNumSamples) {
+				int i, numChains = 0;
+				for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+					if (rxchainmask & (1 << i))
+						numChains++;
+				}
+
+				currCal->calData->calPostProc(ah,
+							      numChains);
+
+				ichan->CalValid |=
+					currCal->calData->calType;
+				currCal->calState = CAL_DONE;
+				*isCalDone = true;
+			} else {
+				ath9k_hw_setup_calibration(ah, currCal);
+			}
+		}
+	} else if (!(ichan->CalValid & currCal->calData->calType)) {
+		ath9k_hw_reset_calibration(ah, currCal);
+	}
+}
+
+static inline bool ath9k_hw_run_init_cals(struct ath_hal *ah,
+					  int init_cal_count)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel ichan;
+	bool isCalDone;
+	struct hal_cal_list *currCal = ahp->ah_cal_list_curr;
+	const struct hal_percal_data *calData = currCal->calData;
+	int i;
+
+	if (currCal == NULL)
+		return false;
+
+	ichan.CalValid = 0;
+
+	for (i = 0; i < init_cal_count; i++) {
+		ath9k_hw_reset_calibration(ah, currCal);
+
+		if (!ath9k_hw_wait(ah, AR_PHY_TIMING_CTRL4(0),
+				   AR_PHY_TIMING_CTRL4_DO_CAL, 0)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: Cal %d failed to complete in 100ms.\n",
+				 __func__, calData->calType);
+
+			ahp->ah_cal_list = ahp->ah_cal_list_last =
+				ahp->ah_cal_list_curr = NULL;
+			return false;
+		}
+
+		ath9k_hw_per_calibration(ah, &ichan, ahp->ah_rxchainmask,
+					 currCal, &isCalDone);
+		if (!isCalDone) {
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: Not able to run Init Cal %d.\n",
+				 __func__, calData->calType);
+		}
+		if (currCal->calNext) {
+			currCal = currCal->calNext;
+			calData = currCal->calData;
+		}
+	}
+
+	ahp->ah_cal_list = ahp->ah_cal_list_last = ahp->ah_cal_list_curr = NULL;
+	return true;
+}
+
+static inline bool
+ath9k_hw_channel_change(struct ath_hal *ah,
+			struct ath9k_channel *chan,
+			enum ath9k_ht_macmode macmode)
+{
+	u32 synthDelay, qnum;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	for (qnum = 0; qnum < AR_NUM_QCU; qnum++) {
+		if (ath9k_hw_numtxpending(ah, qnum)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+				 "%s: Transmit frames pending on queue %d\n",
+				 __func__, qnum);
+			return false;
+		}
+	}
+
+	REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_EN);
+	if (!ath9k_hw_wait(ah, AR_PHY_RFBUS_GRANT, AR_PHY_RFBUS_GRANT_EN,
+			   AR_PHY_RFBUS_GRANT_EN)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_PHY_IO,
+			 "%s: Could not kill baseband RX\n", __func__);
+		return false;
+	}
+
+	ath9k_hw_set_regs(ah, chan, macmode);
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		if (!(ath9k_hw_ar9280_set_channel(ah, chan))) {
+			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+				 "%s: failed to set channel\n", __func__);
+			return false;
+		}
+	} else {
+		if (!(ath9k_hw_set_channel(ah, chan))) {
+			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+				 "%s: failed to set channel\n", __func__);
+			return false;
+		}
+	}
+
+	if (ath9k_hw_set_txpower(ah, &ahp->ah_eeprom, chan,
+				 ath9k_regd_get_ctl(ah, chan),
+				 ath9k_regd_get_antenna_allowed(ah, chan),
+				 chan->maxRegTxPower * 2,
+				 min((u32) MAX_RATE_POWER,
+				     (u32) ah->ah_powerLimit)) != 0) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "%s: error init'ing transmit power\n", __func__);
+		return false;
+	}
+
+	synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
+	if (IS_CHAN_CCK(chan))
+		synthDelay = (4 * synthDelay) / 22;
+	else
+		synthDelay /= 10;
+
+	udelay(synthDelay + BASE_ACTIVATE_DELAY);
+
+	REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
+
+	if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
+		ath9k_hw_set_delta_slope(ah, chan);
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		ath9k_hw_9280_spur_mitigate(ah, chan);
+	else
+		ath9k_hw_spur_mitigate(ah, chan);
+
+	if (!chan->oneTimeCalsDone)
+		chan->oneTimeCalsDone = true;
+
+	return true;
+}
+
+static bool ath9k_hw_chip_reset(struct ath_hal *ah,
+				struct ath9k_channel *chan)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM))
+		return false;
+
+	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
+		return false;
+
+	ahp->ah_chipFullSleep = false;
+
+	ath9k_hw_init_pll(ah, chan);
+
+	ath9k_hw_set_rfmode(ah, chan);
+
+	return true;
+}
+
+static inline void ath9k_hw_set_dma(struct ath_hal *ah)
+{
+	u32 regval;
+
+	regval = REG_READ(ah, AR_AHB_MODE);
+	REG_WRITE(ah, AR_AHB_MODE, regval | AR_AHB_PREFETCH_RD_EN);
+
+	regval = REG_READ(ah, AR_TXCFG) & ~AR_TXCFG_DMASZ_MASK;
+	REG_WRITE(ah, AR_TXCFG, regval | AR_TXCFG_DMASZ_128B);
+
+	REG_RMW_FIELD(ah, AR_TXCFG, AR_FTRIG, ah->ah_txTrigLevel);
+
+	regval = REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_DMASZ_MASK;
+	REG_WRITE(ah, AR_RXCFG, regval | AR_RXCFG_DMASZ_128B);
+
+	REG_WRITE(ah, AR_RXFIFO_CFG, 0x200);
+
+	if (AR_SREV_9285(ah)) {
+		REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
+			  AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE);
+	} else {
+		REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
+			  AR_PCU_TXBUF_CTRL_USABLE_SIZE);
+	}
+}
+
+bool ath9k_hw_stopdmarecv(struct ath_hal *ah)
+{
+	REG_WRITE(ah, AR_CR, AR_CR_RXD);
+	if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+			"%s: dma failed to stop in 10ms\n"
+			"AR_CR=0x%08x\nAR_DIAG_SW=0x%08x\n",
+			__func__,
+			REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
+		return false;
+	} else {
+		return true;
+	}
+}
+
+void ath9k_hw_startpcureceive(struct ath_hal *ah)
+{
+	REG_CLR_BIT(ah, AR_DIAG_SW,
+		    (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
+
+	ath9k_enable_mib_counters(ah);
+
+	ath9k_ani_reset(ah);
+}
+
+void ath9k_hw_stoppcurecv(struct ath_hal *ah)
+{
+	REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS);
+
+	ath9k_hw_disable_mib_counters(ah);
+}
+
+static bool ath9k_hw_iscal_supported(struct ath_hal *ah,
+				     struct ath9k_channel *chan,
+				     enum hal_cal_types calType)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	bool retval = false;
+
+	switch (calType & ahp->ah_suppCals) {
+	case IQ_MISMATCH_CAL:
+		if (!IS_CHAN_B(chan))
+			retval = true;
+		break;
+	case ADC_GAIN_CAL:
+	case ADC_DC_CAL:
+		if (!IS_CHAN_B(chan)
+		    && !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan)))
+			retval = true;
+		break;
+	}
+
+	return retval;
+}
+
+static inline bool ath9k_hw_init_cal(struct ath_hal *ah,
+				     struct ath9k_channel *chan)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *ichan =
+		ath9k_regd_check_channel(ah, chan);
+
+	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
+		  REG_READ(ah, AR_PHY_AGC_CONTROL) |
+		  AR_PHY_AGC_CONTROL_CAL);
+
+	if (!ath9k_hw_wait
+	    (ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL, 0)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: offset calibration failed to complete in 1ms; "
+			 "noisy environment?\n", __func__);
+		return false;
+	}
+
+	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
+		  REG_READ(ah, AR_PHY_AGC_CONTROL) |
+		  AR_PHY_AGC_CONTROL_NF);
+
+	ahp->ah_cal_list = ahp->ah_cal_list_last = ahp->ah_cal_list_curr =
+		NULL;
+
+	if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) {
+		if (ath9k_hw_iscal_supported(ah, chan, ADC_GAIN_CAL)) {
+			INIT_CAL(&ahp->ah_adcGainCalData);
+			INSERT_CAL(ahp, &ahp->ah_adcGainCalData);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: enabling ADC Gain Calibration.\n",
+				 __func__);
+		}
+		if (ath9k_hw_iscal_supported(ah, chan, ADC_DC_CAL)) {
+			INIT_CAL(&ahp->ah_adcDcCalData);
+			INSERT_CAL(ahp, &ahp->ah_adcDcCalData);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: enabling ADC DC Calibration.\n",
+				 __func__);
+		}
+		if (ath9k_hw_iscal_supported(ah, chan, IQ_MISMATCH_CAL)) {
+			INIT_CAL(&ahp->ah_iqCalData);
+			INSERT_CAL(ahp, &ahp->ah_iqCalData);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "%s: enabling IQ Calibration.\n",
+				 __func__);
+		}
+
+		ahp->ah_cal_list_curr = ahp->ah_cal_list;
+
+		if (ahp->ah_cal_list_curr)
+			ath9k_hw_reset_calibration(ah,
+						   ahp->ah_cal_list_curr);
+	}
+
+	ichan->CalValid = 0;
+
+	return true;
+}
+
+
+bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode,
+		    struct ath9k_channel *chan,
+		    enum ath9k_ht_macmode macmode,
+		    u8 txchainmask, u8 rxchainmask,
+		    enum ath9k_ht_extprotspacing extprotspacing,
+		    bool bChannelChange,
+		    int *status)
+{
+#define FAIL(_code)     do { ecode = _code; goto bad; } while (0)
+	u32 saveLedState;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *curchan = ah->ah_curchan;
+	u32 saveDefAntenna;
+	u32 macStaId1;
+	int ecode;
+	int i, rx_chainmask;
+
+	ahp->ah_extprotspacing = extprotspacing;
+	ahp->ah_txchainmask = txchainmask;
+	ahp->ah_rxchainmask = rxchainmask;
+
+	if (AR_SREV_9280(ah)) {
+		ahp->ah_txchainmask &= 0x3;
+		ahp->ah_rxchainmask &= 0x3;
+	}
+
+	if (ath9k_hw_check_chan(ah, chan) == NULL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: invalid channel %u/0x%x; no mapping\n",
+			 __func__, chan->channel, chan->channelFlags);
+		FAIL(-EINVAL);
+	}
+
+	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
+		return false;
+
+	if (curchan)
+		ath9k_hw_getnf(ah, curchan);
+
+	if (bChannelChange &&
+	    (ahp->ah_chipFullSleep != true) &&
+	    (ah->ah_curchan != NULL) &&
+	    (chan->channel != ah->ah_curchan->channel) &&
+	    ((chan->channelFlags & CHANNEL_ALL) ==
+	     (ah->ah_curchan->channelFlags & CHANNEL_ALL)) &&
+	    (!AR_SREV_9280(ah) || (!IS_CHAN_A_5MHZ_SPACED(chan) &&
+				   !IS_CHAN_A_5MHZ_SPACED(ah->
+							  ah_curchan)))) {
+
+		if (ath9k_hw_channel_change(ah, chan, macmode)) {
+			ath9k_hw_loadnf(ah, ah->ah_curchan);
+			ath9k_hw_start_nfcal(ah);
+			return true;
+		}
+	}
+
+	saveDefAntenna = REG_READ(ah, AR_DEF_ANTENNA);
+	if (saveDefAntenna == 0)
+		saveDefAntenna = 1;
+
+	macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;
+
+	saveLedState = REG_READ(ah, AR_CFG_LED) &
+		(AR_CFG_LED_ASSOC_CTL | AR_CFG_LED_MODE_SEL |
+		 AR_CFG_LED_BLINK_THRESH_SEL | AR_CFG_LED_BLINK_SLOW);
+
+	ath9k_hw_mark_phy_inactive(ah);
+
+	if (!ath9k_hw_chip_reset(ah, chan)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: chip reset failed\n",
+			 __func__);
+		FAIL(-EIO);
+	}
+
+	if (AR_SREV_9280(ah)) {
+		REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+			    AR_GPIO_JTAG_DISABLE);
+
+		if (test_bit(ATH9K_MODE_11A, ah->ah_caps.wireless_modes)) {
+			if (IS_CHAN_5GHZ(chan))
+				ath9k_hw_set_gpio(ah, 9, 0);
+			else
+				ath9k_hw_set_gpio(ah, 9, 1);
+		}
+		ath9k_hw_cfg_output(ah, 9, ATH9K_GPIO_OUTPUT_MUX_AS_OUTPUT);
+	}
+
+	ecode = ath9k_hw_process_ini(ah, chan, macmode);
+	if (ecode != 0)
+		goto bad;
+
+	if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
+		ath9k_hw_set_delta_slope(ah, chan);
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		ath9k_hw_9280_spur_mitigate(ah, chan);
+	else
+		ath9k_hw_spur_mitigate(ah, chan);
+
+	if (!ath9k_hw_eeprom_set_board_values(ah, chan)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			 "%s: error setting board options\n", __func__);
+		FAIL(-EIO);
+	}
+
+	ath9k_hw_decrease_chain_power(ah, chan);
+
+	REG_WRITE(ah, AR_STA_ID0, get_unaligned_le32(ahp->ah_macaddr));
+	REG_WRITE(ah, AR_STA_ID1, get_unaligned_le16(ahp->ah_macaddr + 4)
+		  | macStaId1
+		  | AR_STA_ID1_RTS_USE_DEF
+		  | (ah->ah_config.
+		     ack_6mb ? AR_STA_ID1_ACKCTS_6MB : 0)
+		  | ahp->ah_staId1Defaults);
+	ath9k_hw_set_operating_mode(ah, opmode);
+
+	REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(ahp->ah_bssidmask));
+	REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(ahp->ah_bssidmask + 4));
+
+	REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna);
+
+	REG_WRITE(ah, AR_BSS_ID0, get_unaligned_le32(ahp->ah_bssid));
+	REG_WRITE(ah, AR_BSS_ID1, get_unaligned_le16(ahp->ah_bssid + 4) |
+		  ((ahp->ah_assocId & 0x3fff) << AR_BSS_ID1_AID_S));
+
+	REG_WRITE(ah, AR_ISR, ~0);
+
+	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		if (!(ath9k_hw_ar9280_set_channel(ah, chan)))
+			FAIL(-EIO);
+	} else {
+		if (!(ath9k_hw_set_channel(ah, chan)))
+			FAIL(-EIO);
+	}
+
+	for (i = 0; i < AR_NUM_DCU; i++)
+		REG_WRITE(ah, AR_DQCUMASK(i), 1 << i);
+
+	ahp->ah_intrTxqs = 0;
+	for (i = 0; i < ah->ah_caps.total_queues; i++)
+		ath9k_hw_resettxqueue(ah, i);
+
+	ath9k_hw_init_interrupt_masks(ah, opmode);
+	ath9k_hw_init_qos(ah);
+
+	ath9k_hw_init_user_settings(ah);
+
+	ah->ah_opmode = opmode;
+
+	REG_WRITE(ah, AR_STA_ID1,
+		  REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PRESERVE_SEQNUM);
+
+	ath9k_hw_set_dma(ah);
+
+	REG_WRITE(ah, AR_OBS, 8);
+
+	if (ahp->ah_intrMitigation) {
+
+		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500);
+		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, 2000);
+	}
+
+	ath9k_hw_init_bb(ah, chan);
+
+	if (!ath9k_hw_init_cal(ah, chan))
+		FAIL(-ENODEV);
+
+	rx_chainmask = ahp->ah_rxchainmask;
+	if ((rx_chainmask == 0x5) || (rx_chainmask == 0x3)) {
+		REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx_chainmask);
+		REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx_chainmask);
+	}
+
+	REG_WRITE(ah, AR_CFG_LED, saveLedState | AR_CFG_SCLK_32KHZ);
+
+	if (AR_SREV_9100(ah)) {
+		u32 mask;
+		mask = REG_READ(ah, AR_CFG);
+		if (mask & (AR_CFG_SWRB | AR_CFG_SWTB | AR_CFG_SWRG)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+				 "%s CFG Byte Swap Set 0x%x\n", __func__,
+				 mask);
+		} else {
+			mask =
+				INIT_CONFIG_STATUS | AR_CFG_SWRB | AR_CFG_SWTB;
+			REG_WRITE(ah, AR_CFG, mask);
+			DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+				 "%s Setting CFG 0x%x\n", __func__,
+				 REG_READ(ah, AR_CFG));
+		}
+	} else {
+#ifdef __BIG_ENDIAN
+		REG_WRITE(ah, AR_CFG, AR_CFG_SWTD | AR_CFG_SWRD);
+#endif
+	}
+
+	return true;
+bad:
+	if (status)
+		*status = ecode;
+	return false;
+#undef FAIL
+}
+
+bool ath9k_hw_phy_disable(struct ath_hal *ah)
+{
+	return ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM);
+}
+
+bool ath9k_hw_disable(struct ath_hal *ah)
+{
+	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
+		return false;
+
+	return ath9k_hw_set_reset_reg(ah, ATH9K_RESET_COLD);
+}
+
+bool
+ath9k_hw_calibrate(struct ath_hal *ah, struct ath9k_channel *chan,
+		   u8 rxchainmask, bool longcal,
+		   bool *isCalDone)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct hal_cal_list *currCal = ahp->ah_cal_list_curr;
+	struct ath9k_channel *ichan =
+		ath9k_regd_check_channel(ah, chan);
+
+	*isCalDone = true;
+
+	if (ichan == NULL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: invalid channel %u/0x%x; no mapping\n",
+			 __func__, chan->channel, chan->channelFlags);
+		return false;
+	}
+
+	if (currCal &&
+	    (currCal->calState == CAL_RUNNING ||
+	     currCal->calState == CAL_WAITING)) {
+		ath9k_hw_per_calibration(ah, ichan, rxchainmask, currCal,
+					 isCalDone);
+		if (*isCalDone) {
+			ahp->ah_cal_list_curr = currCal = currCal->calNext;
+
+			if (currCal->calState == CAL_WAITING) {
+				*isCalDone = false;
+				ath9k_hw_reset_calibration(ah, currCal);
+			}
+		}
+	}
+
+	if (longcal) {
+		ath9k_hw_getnf(ah, ichan);
+		ath9k_hw_loadnf(ah, ah->ah_curchan);
+		ath9k_hw_start_nfcal(ah);
+
+		if ((ichan->channelFlags & CHANNEL_CW_INT) != 0) {
+
+			chan->channelFlags |= CHANNEL_CW_INT;
+			ichan->channelFlags &= ~CHANNEL_CW_INT;
+		}
+	}
+
+	return true;
+}
+
+static void ath9k_hw_iqcal_collect(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		ahp->ah_totalPowerMeasI[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
+		ahp->ah_totalPowerMeasQ[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
+		ahp->ah_totalIqCorrMeas[i] +=
+			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
+			 ahp->ah_CalSamples, i, ahp->ah_totalPowerMeasI[i],
+			 ahp->ah_totalPowerMeasQ[i],
+			 ahp->ah_totalIqCorrMeas[i]);
+	}
+}
+
+static void ath9k_hw_adc_gaincal_collect(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		ahp->ah_totalAdcIOddPhase[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
+		ahp->ah_totalAdcIEvenPhase[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
+		ahp->ah_totalAdcQOddPhase[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
+		ahp->ah_totalAdcQEvenPhase[i] +=
+			REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			"%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
+			"oddq=0x%08x; evenq=0x%08x;\n",
+			 ahp->ah_CalSamples, i,
+			 ahp->ah_totalAdcIOddPhase[i],
+			 ahp->ah_totalAdcIEvenPhase[i],
+			 ahp->ah_totalAdcQOddPhase[i],
+			 ahp->ah_totalAdcQEvenPhase[i]);
+	}
+}
+
+static void ath9k_hw_adc_dccal_collect(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int i;
+
+	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		ahp->ah_totalAdcDcOffsetIOddPhase[i] +=
+			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
+		ahp->ah_totalAdcDcOffsetIEvenPhase[i] +=
+			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
+		ahp->ah_totalAdcDcOffsetQOddPhase[i] +=
+			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
+		ahp->ah_totalAdcDcOffsetQEvenPhase[i] +=
+			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			"%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
+			"oddq=0x%08x; evenq=0x%08x;\n",
+			 ahp->ah_CalSamples, i,
+			 ahp->ah_totalAdcDcOffsetIOddPhase[i],
+			 ahp->ah_totalAdcDcOffsetIEvenPhase[i],
+			 ahp->ah_totalAdcDcOffsetQOddPhase[i],
+			 ahp->ah_totalAdcDcOffsetQEvenPhase[i]);
+	}
+}
+
+static void ath9k_hw_iqcalibrate(struct ath_hal *ah, u8 numChains)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 powerMeasQ, powerMeasI, iqCorrMeas;
+	u32 qCoffDenom, iCoffDenom;
+	int32_t qCoff, iCoff;
+	int iqCorrNeg, i;
+
+	for (i = 0; i < numChains; i++) {
+		powerMeasI = ahp->ah_totalPowerMeasI[i];
+		powerMeasQ = ahp->ah_totalPowerMeasQ[i];
+		iqCorrMeas = ahp->ah_totalIqCorrMeas[i];
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Starting IQ Cal and Correction for Chain %d\n",
+			 i);
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Orignal: Chn %diq_corr_meas = 0x%08x\n",
+			 i, ahp->ah_totalIqCorrMeas[i]);
+
+		iqCorrNeg = 0;
+
+
+		if (iqCorrMeas > 0x80000000) {
+			iqCorrMeas = (0xffffffff - iqCorrMeas) + 1;
+			iqCorrNeg = 1;
+		}
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
+			 iqCorrNeg);
+
+		iCoffDenom = (powerMeasI / 2 + powerMeasQ / 2) / 128;
+		qCoffDenom = powerMeasQ / 64;
+
+		if (powerMeasQ != 0) {
+
+			iCoff = iqCorrMeas / iCoffDenom;
+			qCoff = powerMeasI / qCoffDenom - 64;
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "Chn %d iCoff = 0x%08x\n", i, iCoff);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "Chn %d qCoff = 0x%08x\n", i, qCoff);
+
+
+			iCoff = iCoff & 0x3f;
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "New: Chn %d iCoff = 0x%08x\n", i, iCoff);
+			if (iqCorrNeg == 0x0)
+				iCoff = 0x40 - iCoff;
+
+			if (qCoff > 15)
+				qCoff = 15;
+			else if (qCoff <= -16)
+				qCoff = 16;
+
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "Chn %d : iCoff = 0x%x  qCoff = 0x%x\n",
+				i, iCoff, qCoff);
+
+			REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
+				      AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF,
+				      iCoff);
+			REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
+				      AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF,
+				      qCoff);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				"IQ Cal and Correction done for Chain %d\n",
+				i);
+		}
+	}
+
+	REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4(0),
+		    AR_PHY_TIMING_CTRL4_IQCORR_ENABLE);
+}
+
+static void
+ath9k_hw_adc_gaincal_calibrate(struct ath_hal *ah, u8 numChains)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 iOddMeasOffset, iEvenMeasOffset, qOddMeasOffset,
+		qEvenMeasOffset;
+	u32 qGainMismatch, iGainMismatch, val, i;
+
+	for (i = 0; i < numChains; i++) {
+		iOddMeasOffset = ahp->ah_totalAdcIOddPhase[i];
+		iEvenMeasOffset = ahp->ah_totalAdcIEvenPhase[i];
+		qOddMeasOffset = ahp->ah_totalAdcQOddPhase[i];
+		qEvenMeasOffset = ahp->ah_totalAdcQEvenPhase[i];
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Starting ADC Gain Cal for Chain %d\n", i);
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_odd_i = 0x%08x\n", i,
+			 iOddMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_even_i = 0x%08x\n", i,
+			 iEvenMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_odd_q = 0x%08x\n", i,
+			 qOddMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_even_q = 0x%08x\n", i,
+			 qEvenMeasOffset);
+
+		if (iOddMeasOffset != 0 && qEvenMeasOffset != 0) {
+			iGainMismatch =
+				((iEvenMeasOffset * 32) /
+				 iOddMeasOffset) & 0x3f;
+			qGainMismatch =
+				((qOddMeasOffset * 32) /
+				 qEvenMeasOffset) & 0x3f;
+
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "Chn %d gain_mismatch_i = 0x%08x\n", i,
+				 iGainMismatch);
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "Chn %d gain_mismatch_q = 0x%08x\n", i,
+				 qGainMismatch);
+
+			val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
+			val &= 0xfffff000;
+			val |= (qGainMismatch) | (iGainMismatch << 6);
+			REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
+
+			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+				 "ADC Gain Cal done for Chain %d\n", i);
+		}
+	}
+
+	REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0),
+		  REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0)) |
+		  AR_PHY_NEW_ADC_GAIN_CORR_ENABLE);
+}
+
+static void
+ath9k_hw_adc_dccal_calibrate(struct ath_hal *ah, u8 numChains)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 iOddMeasOffset, iEvenMeasOffset, val, i;
+	int32_t qOddMeasOffset, qEvenMeasOffset, qDcMismatch, iDcMismatch;
+	const struct hal_percal_data *calData =
+		ahp->ah_cal_list_curr->calData;
+	u32 numSamples =
+		(1 << (calData->calCountMax + 5)) * calData->calNumSamples;
+
+	for (i = 0; i < numChains; i++) {
+		iOddMeasOffset = ahp->ah_totalAdcDcOffsetIOddPhase[i];
+		iEvenMeasOffset = ahp->ah_totalAdcDcOffsetIEvenPhase[i];
+		qOddMeasOffset = ahp->ah_totalAdcDcOffsetQOddPhase[i];
+		qEvenMeasOffset = ahp->ah_totalAdcDcOffsetQEvenPhase[i];
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Starting ADC DC Offset Cal for Chain %d\n", i);
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_odd_i = %d\n", i,
+			 iOddMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_even_i = %d\n", i,
+			 iEvenMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_odd_q = %d\n", i,
+			 qOddMeasOffset);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d pwr_meas_even_q = %d\n", i,
+			 qEvenMeasOffset);
+
+		iDcMismatch = (((iEvenMeasOffset - iOddMeasOffset) * 2) /
+			       numSamples) & 0x1ff;
+		qDcMismatch = (((qOddMeasOffset - qEvenMeasOffset) * 2) /
+			       numSamples) & 0x1ff;
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d dc_offset_mismatch_i = 0x%08x\n", i,
+			 iDcMismatch);
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "Chn %d dc_offset_mismatch_q = 0x%08x\n", i,
+			 qDcMismatch);
+
+		val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
+		val &= 0xc0000fff;
+		val |= (qDcMismatch << 12) | (iDcMismatch << 21);
+		REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
+
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "ADC DC Offset Cal done for Chain %d\n", i);
+	}
+
+	REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0),
+		  REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0)) |
+		  AR_PHY_NEW_ADC_DC_OFFSET_CORR_ENABLE);
+}
+
+bool ath9k_hw_set_txpowerlimit(struct ath_hal *ah, u32 limit)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *chan = ah->ah_curchan;
+
+	ah->ah_powerLimit = min(limit, (u32) MAX_RATE_POWER);
+
+	if (ath9k_hw_set_txpower(ah, &ahp->ah_eeprom, chan,
+				 ath9k_regd_get_ctl(ah, chan),
+				 ath9k_regd_get_antenna_allowed(ah,
+								chan),
+				 chan->maxRegTxPower * 2,
+				 min((u32) MAX_RATE_POWER,
+				     (u32) ah->ah_powerLimit)) != 0)
+		return false;
+
+	return true;
+}
+
+void
+ath9k_hw_get_channel_centers(struct ath_hal *ah,
+			     struct ath9k_channel *chan,
+			     struct chan_centers *centers)
+{
+	int8_t extoff;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (!IS_CHAN_HT40(chan)) {
+		centers->ctl_center = centers->ext_center =
+			centers->synth_center = chan->channel;
+		return;
+	}
+
+	if ((chan->chanmode == CHANNEL_A_HT40PLUS) ||
+	    (chan->chanmode == CHANNEL_G_HT40PLUS)) {
+		centers->synth_center =
+			chan->channel + HT40_CHANNEL_CENTER_SHIFT;
+		extoff = 1;
+	} else {
+		centers->synth_center =
+			chan->channel - HT40_CHANNEL_CENTER_SHIFT;
+		extoff = -1;
+	}
+
+	centers->ctl_center = centers->synth_center - (extoff *
+		HT40_CHANNEL_CENTER_SHIFT);
+	centers->ext_center = centers->synth_center + (extoff *
+		((ahp->
+		ah_extprotspacing
+		==
+		ATH9K_HT_EXTPROTSPACING_20)
+		?
+		HT40_CHANNEL_CENTER_SHIFT
+		: 15));
+
+}
+
+void
+ath9k_hw_reset_calvalid(struct ath_hal *ah, struct ath9k_channel *chan,
+			bool *isCalDone)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *ichan =
+		ath9k_regd_check_channel(ah, chan);
+	struct hal_cal_list *currCal = ahp->ah_cal_list_curr;
+
+	*isCalDone = true;
+
+	if (!AR_SREV_9100(ah) && !AR_SREV_9160_10_OR_LATER(ah))
+		return;
+
+	if (currCal == NULL)
+		return;
+
+	if (ichan == NULL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: invalid channel %u/0x%x; no mapping\n",
+			 __func__, chan->channel, chan->channelFlags);
+		return;
+	}
+
+
+	if (currCal->calState != CAL_DONE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+			 "%s: Calibration state incorrect, %d\n",
+			 __func__, currCal->calState);
+		return;
+	}
+
+
+	if (!ath9k_hw_iscal_supported(ah, chan, currCal->calData->calType))
+		return;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
+		 "%s: Resetting Cal %d state for channel %u/0x%x\n",
+		 __func__, currCal->calData->calType, chan->channel,
+		 chan->channelFlags);
+
+	ichan->CalValid &= ~currCal->calData->calType;
+	currCal->calState = CAL_WAITING;
+
+	*isCalDone = false;
+}
+
+void ath9k_hw_getmac(struct ath_hal *ah, u8 *mac)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	memcpy(mac, ahp->ah_macaddr, ETH_ALEN);
+}
+
+bool ath9k_hw_setmac(struct ath_hal *ah, const u8 *mac)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	memcpy(ahp->ah_macaddr, mac, ETH_ALEN);
+	return true;
+}
+
+void ath9k_hw_getbssidmask(struct ath_hal *ah, u8 *mask)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	memcpy(mask, ahp->ah_bssidmask, ETH_ALEN);
+}
+
+bool
+ath9k_hw_setbssidmask(struct ath_hal *ah, const u8 *mask)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	memcpy(ahp->ah_bssidmask, mask, ETH_ALEN);
+
+	REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(ahp->ah_bssidmask));
+	REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(ahp->ah_bssidmask + 4));
+
+	return true;
+}
+
+#ifdef CONFIG_ATH9K_RFKILL
+static void ath9k_enable_rfkill(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+		    AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
+
+	REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
+		    AR_GPIO_INPUT_MUX2_RFSILENT);
+
+	ath9k_hw_cfg_gpio_input(ah, ahp->ah_gpioSelect);
+	REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
+
+	if (ahp->ah_gpioBit == ath9k_hw_gpio_get(ah, ahp->ah_gpioSelect)) {
+
+		ath9k_hw_set_gpio_intr(ah, ahp->ah_gpioSelect,
+				       !ahp->ah_gpioBit);
+	} else {
+		ath9k_hw_set_gpio_intr(ah, ahp->ah_gpioSelect,
+				       ahp->ah_gpioBit);
+	}
+}
+#endif
+
+void
+ath9k_hw_write_associd(struct ath_hal *ah, const u8 *bssid,
+		       u16 assocId)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	memcpy(ahp->ah_bssid, bssid, ETH_ALEN);
+	ahp->ah_assocId = assocId;
+
+	REG_WRITE(ah, AR_BSS_ID0, get_unaligned_le32(ahp->ah_bssid));
+	REG_WRITE(ah, AR_BSS_ID1, get_unaligned_le16(ahp->ah_bssid + 4) |
+		  ((assocId & 0x3fff) << AR_BSS_ID1_AID_S));
+}
+
+u64 ath9k_hw_gettsf64(struct ath_hal *ah)
+{
+	u64 tsf;
+
+	tsf = REG_READ(ah, AR_TSF_U32);
+	tsf = (tsf << 32) | REG_READ(ah, AR_TSF_L32);
+	return tsf;
+}
+
+void ath9k_hw_reset_tsf(struct ath_hal *ah)
+{
+	int count;
+
+	count = 0;
+	while (REG_READ(ah, AR_SLP32_MODE) & AR_SLP32_TSF_WRITE_STATUS) {
+		count++;
+		if (count > 10) {
+			DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			 "%s: AR_SLP32_TSF_WRITE_STATUS limit exceeded\n",
+				 __func__);
+			break;
+		}
+		udelay(10);
+	}
+	REG_WRITE(ah, AR_RESET_TSF, AR_RESET_TSF_ONCE);
+}
+
+u32 ath9k_hw_getdefantenna(struct ath_hal *ah)
+{
+	return REG_READ(ah, AR_DEF_ANTENNA) & 0x7;
+}
+
+void ath9k_hw_setantenna(struct ath_hal *ah, u32 antenna)
+{
+	REG_WRITE(ah, AR_DEF_ANTENNA, (antenna & 0x7));
+}
+
+bool
+ath9k_hw_setantennaswitch(struct ath_hal *ah,
+			  enum ath9k_ant_setting settings,
+			  struct ath9k_channel *chan,
+			  u8 *tx_chainmask,
+			  u8 *rx_chainmask,
+			  u8 *antenna_cfgd)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	static u8 tx_chainmask_cfg, rx_chainmask_cfg;
+
+	if (AR_SREV_9280(ah)) {
+		if (!tx_chainmask_cfg) {
+
+			tx_chainmask_cfg = *tx_chainmask;
+			rx_chainmask_cfg = *rx_chainmask;
+		}
+
+		switch (settings) {
+		case ATH9K_ANT_FIXED_A:
+			*tx_chainmask = ATH9K_ANTENNA0_CHAINMASK;
+			*rx_chainmask = ATH9K_ANTENNA0_CHAINMASK;
+			*antenna_cfgd = true;
+			break;
+		case ATH9K_ANT_FIXED_B:
+			if (ah->ah_caps.tx_chainmask >
+			    ATH9K_ANTENNA1_CHAINMASK) {
+				*tx_chainmask = ATH9K_ANTENNA1_CHAINMASK;
+			}
+			*rx_chainmask = ATH9K_ANTENNA1_CHAINMASK;
+			*antenna_cfgd = true;
+			break;
+		case ATH9K_ANT_VARIABLE:
+			*tx_chainmask = tx_chainmask_cfg;
+			*rx_chainmask = rx_chainmask_cfg;
+			*antenna_cfgd = true;
+			break;
+		default:
+			break;
+		}
+	} else {
+		ahp->ah_diversityControl = settings;
+	}
+
+	return true;
+}
+
+void ath9k_hw_setopmode(struct ath_hal *ah)
+{
+	ath9k_hw_set_operating_mode(ah, ah->ah_opmode);
+}
+
+bool
+ath9k_hw_getcapability(struct ath_hal *ah, enum ath9k_capability_type type,
+		       u32 capability, u32 *result)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	const struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+	switch (type) {
+	case ATH9K_CAP_CIPHER:
+		switch (capability) {
+		case ATH9K_CIPHER_AES_CCM:
+		case ATH9K_CIPHER_AES_OCB:
+		case ATH9K_CIPHER_TKIP:
+		case ATH9K_CIPHER_WEP:
+		case ATH9K_CIPHER_MIC:
+		case ATH9K_CIPHER_CLR:
+			return true;
+		default:
+			return false;
+		}
+	case ATH9K_CAP_TKIP_MIC:
+		switch (capability) {
+		case 0:
+			return true;
+		case 1:
+			return (ahp->ah_staId1Defaults &
+				AR_STA_ID1_CRPT_MIC_ENABLE) ? true :
+			false;
+		}
+	case ATH9K_CAP_TKIP_SPLIT:
+		return (ahp->ah_miscMode & AR_PCU_MIC_NEW_LOC_ENA) ?
+			false : true;
+	case ATH9K_CAP_WME_TKIPMIC:
+		return 0;
+	case ATH9K_CAP_PHYCOUNTERS:
+		return ahp->ah_hasHwPhyCounters ? 0 : -ENXIO;
+	case ATH9K_CAP_DIVERSITY:
+		return (REG_READ(ah, AR_PHY_CCK_DETECT) &
+			AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV) ?
+			true : false;
+	case ATH9K_CAP_PHYDIAG:
+		return true;
+	case ATH9K_CAP_MCAST_KEYSRCH:
+		switch (capability) {
+		case 0:
+			return true;
+		case 1:
+			if (REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_ADHOC) {
+				return false;
+			} else {
+				return (ahp->ah_staId1Defaults &
+					AR_STA_ID1_MCAST_KSRCH) ? true :
+					false;
+			}
+		}
+		return false;
+	case ATH9K_CAP_TSF_ADJUST:
+		return (ahp->ah_miscMode & AR_PCU_TX_ADD_TSF) ?
+			true : false;
+	case ATH9K_CAP_RFSILENT:
+		if (capability == 3)
+			return false;
+	case ATH9K_CAP_ANT_CFG_2GHZ:
+		*result = pCap->num_antcfg_2ghz;
+		return true;
+	case ATH9K_CAP_ANT_CFG_5GHZ:
+		*result = pCap->num_antcfg_5ghz;
+		return true;
+	case ATH9K_CAP_TXPOW:
+		switch (capability) {
+		case 0:
+			return 0;
+		case 1:
+			*result = ah->ah_powerLimit;
+			return 0;
+		case 2:
+			*result = ah->ah_maxPowerLevel;
+			return 0;
+		case 3:
+			*result = ah->ah_tpScale;
+			return 0;
+		}
+		return false;
+	default:
+		return false;
+	}
+}
+
+int
+ath9k_hw_select_antconfig(struct ath_hal *ah, u32 cfg)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_channel *chan = ah->ah_curchan;
+	const struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	u16 ant_config;
+	u32 halNumAntConfig;
+
+	halNumAntConfig =
+		IS_CHAN_2GHZ(chan) ? pCap->num_antcfg_2ghz : pCap->
+		num_antcfg_5ghz;
+
+	if (cfg < halNumAntConfig) {
+		if (!ath9k_hw_get_eeprom_antenna_cfg(ahp, chan,
+						     cfg, &ant_config)) {
+			REG_WRITE(ah, AR_PHY_SWITCH_COM, ant_config);
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+bool ath9k_hw_intrpend(struct ath_hal *ah)
+{
+	u32 host_isr;
+
+	if (AR_SREV_9100(ah))
+		return true;
+
+	host_isr = REG_READ(ah, AR_INTR_ASYNC_CAUSE);
+	if ((host_isr & AR_INTR_MAC_IRQ) && (host_isr != AR_INTR_SPURIOUS))
+		return true;
+
+	host_isr = REG_READ(ah, AR_INTR_SYNC_CAUSE);
+	if ((host_isr & AR_INTR_SYNC_DEFAULT)
+	    && (host_isr != AR_INTR_SPURIOUS))
+		return true;
+
+	return false;
+}
+
+bool ath9k_hw_getisr(struct ath_hal *ah, enum ath9k_int *masked)
+{
+	u32 isr = 0;
+	u32 mask2 = 0;
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	u32 sync_cause = 0;
+	bool fatal_int = false;
+
+	if (!AR_SREV_9100(ah)) {
+		if (REG_READ(ah, AR_INTR_ASYNC_CAUSE) & AR_INTR_MAC_IRQ) {
+			if ((REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M)
+			    == AR_RTC_STATUS_ON) {
+				isr = REG_READ(ah, AR_ISR);
+			}
+		}
+
+		sync_cause =
+			REG_READ(ah,
+				 AR_INTR_SYNC_CAUSE) & AR_INTR_SYNC_DEFAULT;
+
+		*masked = 0;
+
+		if (!isr && !sync_cause)
+			return false;
+	} else {
+		*masked = 0;
+		isr = REG_READ(ah, AR_ISR);
+	}
+
+	if (isr) {
+		struct ath_hal_5416 *ahp = AH5416(ah);
+
+		if (isr & AR_ISR_BCNMISC) {
+			u32 isr2;
+			isr2 = REG_READ(ah, AR_ISR_S2);
+			if (isr2 & AR_ISR_S2_TIM)
+				mask2 |= ATH9K_INT_TIM;
+			if (isr2 & AR_ISR_S2_DTIM)
+				mask2 |= ATH9K_INT_DTIM;
+			if (isr2 & AR_ISR_S2_DTIMSYNC)
+				mask2 |= ATH9K_INT_DTIMSYNC;
+			if (isr2 & (AR_ISR_S2_CABEND))
+				mask2 |= ATH9K_INT_CABEND;
+			if (isr2 & AR_ISR_S2_GTT)
+				mask2 |= ATH9K_INT_GTT;
+			if (isr2 & AR_ISR_S2_CST)
+				mask2 |= ATH9K_INT_CST;
+		}
+
+		isr = REG_READ(ah, AR_ISR_RAC);
+		if (isr == 0xffffffff) {
+			*masked = 0;
+			return false;
+		}
+
+		*masked = isr & ATH9K_INT_COMMON;
+
+		if (ahp->ah_intrMitigation) {
+
+			if (isr & (AR_ISR_RXMINTR | AR_ISR_RXINTM))
+				*masked |= ATH9K_INT_RX;
+		}
+
+		if (isr & (AR_ISR_RXOK | AR_ISR_RXERR))
+			*masked |= ATH9K_INT_RX;
+		if (isr &
+		    (AR_ISR_TXOK | AR_ISR_TXDESC | AR_ISR_TXERR |
+		     AR_ISR_TXEOL)) {
+			u32 s0_s, s1_s;
+
+			*masked |= ATH9K_INT_TX;
+
+			s0_s = REG_READ(ah, AR_ISR_S0_S);
+			ahp->ah_intrTxqs |= MS(s0_s, AR_ISR_S0_QCU_TXOK);
+			ahp->ah_intrTxqs |= MS(s0_s, AR_ISR_S0_QCU_TXDESC);
+
+			s1_s = REG_READ(ah, AR_ISR_S1_S);
+			ahp->ah_intrTxqs |= MS(s1_s, AR_ISR_S1_QCU_TXERR);
+			ahp->ah_intrTxqs |= MS(s1_s, AR_ISR_S1_QCU_TXEOL);
+		}
+
+		if (isr & AR_ISR_RXORN) {
+			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
+				 "%s: receive FIFO overrun interrupt\n",
+				 __func__);
+		}
+
+		if (!AR_SREV_9100(ah)) {
+			if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+				u32 isr5 = REG_READ(ah, AR_ISR_S5_S);
+				if (isr5 & AR_ISR_S5_TIM_TIMER)
+					*masked |= ATH9K_INT_TIM_TIMER;
+			}
+		}
+
+		*masked |= mask2;
+	}
+	if (AR_SREV_9100(ah))
+		return true;
+	if (sync_cause) {
+		fatal_int =
+			(sync_cause &
+			 (AR_INTR_SYNC_HOST1_FATAL | AR_INTR_SYNC_HOST1_PERR))
+			? true : false;
+
+		if (fatal_int) {
+			if (sync_cause & AR_INTR_SYNC_HOST1_FATAL) {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+					 "%s: received PCI FATAL interrupt\n",
+					 __func__);
+			}
+			if (sync_cause & AR_INTR_SYNC_HOST1_PERR) {
+				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+					 "%s: received PCI PERR interrupt\n",
+					 __func__);
+			}
+		}
+		if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
+			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
+				 "%s: AR_INTR_SYNC_RADM_CPL_TIMEOUT\n",
+				 __func__);
+			REG_WRITE(ah, AR_RC, AR_RC_HOSTIF);
+			REG_WRITE(ah, AR_RC, 0);
+			*masked |= ATH9K_INT_FATAL;
+		}
+		if (sync_cause & AR_INTR_SYNC_LOCAL_TIMEOUT) {
+			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
+				 "%s: AR_INTR_SYNC_LOCAL_TIMEOUT\n",
+				 __func__);
+		}
+
+		REG_WRITE(ah, AR_INTR_SYNC_CAUSE_CLR, sync_cause);
+		(void) REG_READ(ah, AR_INTR_SYNC_CAUSE_CLR);
+	}
+	return true;
+}
+
+enum ath9k_int ath9k_hw_intrget(struct ath_hal *ah)
+{
+	return AH5416(ah)->ah_maskReg;
+}
+
+enum ath9k_int ath9k_hw_set_interrupts(struct ath_hal *ah, enum ath9k_int ints)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 omask = ahp->ah_maskReg;
+	u32 mask, mask2;
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "%s: 0x%x => 0x%x\n", __func__,
+		 omask, ints);
+
+	if (omask & ATH9K_INT_GLOBAL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "%s: disable IER\n",
+			 __func__);
+		REG_WRITE(ah, AR_IER, AR_IER_DISABLE);
+		(void) REG_READ(ah, AR_IER);
+		if (!AR_SREV_9100(ah)) {
+			REG_WRITE(ah, AR_INTR_ASYNC_ENABLE, 0);
+			(void) REG_READ(ah, AR_INTR_ASYNC_ENABLE);
+
+			REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
+			(void) REG_READ(ah, AR_INTR_SYNC_ENABLE);
+		}
+	}
+
+	mask = ints & ATH9K_INT_COMMON;
+	mask2 = 0;
+
+	if (ints & ATH9K_INT_TX) {
+		if (ahp->ah_txOkInterruptMask)
+			mask |= AR_IMR_TXOK;
+		if (ahp->ah_txDescInterruptMask)
+			mask |= AR_IMR_TXDESC;
+		if (ahp->ah_txErrInterruptMask)
+			mask |= AR_IMR_TXERR;
+		if (ahp->ah_txEolInterruptMask)
+			mask |= AR_IMR_TXEOL;
+	}
+	if (ints & ATH9K_INT_RX) {
+		mask |= AR_IMR_RXERR;
+		if (ahp->ah_intrMitigation)
+			mask |= AR_IMR_RXMINTR | AR_IMR_RXINTM;
+		else
+			mask |= AR_IMR_RXOK | AR_IMR_RXDESC;
+		if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
+			mask |= AR_IMR_GENTMR;
+	}
+
+	if (ints & (ATH9K_INT_BMISC)) {
+		mask |= AR_IMR_BCNMISC;
+		if (ints & ATH9K_INT_TIM)
+			mask2 |= AR_IMR_S2_TIM;
+		if (ints & ATH9K_INT_DTIM)
+			mask2 |= AR_IMR_S2_DTIM;
+		if (ints & ATH9K_INT_DTIMSYNC)
+			mask2 |= AR_IMR_S2_DTIMSYNC;
+		if (ints & ATH9K_INT_CABEND)
+			mask2 |= (AR_IMR_S2_CABEND);
+	}
+
+	if (ints & (ATH9K_INT_GTT | ATH9K_INT_CST)) {
+		mask |= AR_IMR_BCNMISC;
+		if (ints & ATH9K_INT_GTT)
+			mask2 |= AR_IMR_S2_GTT;
+		if (ints & ATH9K_INT_CST)
+			mask2 |= AR_IMR_S2_CST;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "%s: new IMR 0x%x\n", __func__,
+		 mask);
+	REG_WRITE(ah, AR_IMR, mask);
+	mask = REG_READ(ah, AR_IMR_S2) & ~(AR_IMR_S2_TIM |
+					   AR_IMR_S2_DTIM |
+					   AR_IMR_S2_DTIMSYNC |
+					   AR_IMR_S2_CABEND |
+					   AR_IMR_S2_CABTO |
+					   AR_IMR_S2_TSFOOR |
+					   AR_IMR_S2_GTT | AR_IMR_S2_CST);
+	REG_WRITE(ah, AR_IMR_S2, mask | mask2);
+	ahp->ah_maskReg = ints;
+
+	if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+		if (ints & ATH9K_INT_TIM_TIMER)
+			REG_SET_BIT(ah, AR_IMR_S5, AR_IMR_S5_TIM_TIMER);
+		else
+			REG_CLR_BIT(ah, AR_IMR_S5, AR_IMR_S5_TIM_TIMER);
+	}
+
+	if (ints & ATH9K_INT_GLOBAL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "%s: enable IER\n",
+			 __func__);
+		REG_WRITE(ah, AR_IER, AR_IER_ENABLE);
+		if (!AR_SREV_9100(ah)) {
+			REG_WRITE(ah, AR_INTR_ASYNC_ENABLE,
+				  AR_INTR_MAC_IRQ);
+			REG_WRITE(ah, AR_INTR_ASYNC_MASK, AR_INTR_MAC_IRQ);
+
+
+			REG_WRITE(ah, AR_INTR_SYNC_ENABLE,
+				  AR_INTR_SYNC_DEFAULT);
+			REG_WRITE(ah, AR_INTR_SYNC_MASK,
+				  AR_INTR_SYNC_DEFAULT);
+		}
+		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "AR_IMR 0x%x IER 0x%x\n",
+			 REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER));
+	}
+
+	return omask;
+}
+
+void
+ath9k_hw_beaconinit(struct ath_hal *ah,
+		    u32 next_beacon, u32 beacon_period)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	int flags = 0;
+
+	ahp->ah_beaconInterval = beacon_period;
+
+	switch (ah->ah_opmode) {
+	case ATH9K_M_STA:
+	case ATH9K_M_MONITOR:
+		REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon));
+		REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
+		REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
+		flags |= AR_TBTT_TIMER_EN;
+		break;
+	case ATH9K_M_IBSS:
+		REG_SET_BIT(ah, AR_TXCFG,
+			    AR_TXCFG_ADHOC_BEACON_ATIM_TX_POLICY);
+		REG_WRITE(ah, AR_NEXT_NDP_TIMER,
+			  TU_TO_USEC(next_beacon +
+				     (ahp->ah_atimWindow ? ahp->
+				      ah_atimWindow : 1)));
+		flags |= AR_NDP_TIMER_EN;
+	case ATH9K_M_HOSTAP:
+		REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon));
+		REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT,
+			  TU_TO_USEC(next_beacon -
+				     ah->ah_config.
+				     dma_beacon_response_time));
+		REG_WRITE(ah, AR_NEXT_SWBA,
+			  TU_TO_USEC(next_beacon -
+				     ah->ah_config.
+				     sw_beacon_response_time));
+		flags |=
+			AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN;
+		break;
+	}
+
+	REG_WRITE(ah, AR_BEACON_PERIOD, TU_TO_USEC(beacon_period));
+	REG_WRITE(ah, AR_DMA_BEACON_PERIOD, TU_TO_USEC(beacon_period));
+	REG_WRITE(ah, AR_SWBA_PERIOD, TU_TO_USEC(beacon_period));
+	REG_WRITE(ah, AR_NDP_PERIOD, TU_TO_USEC(beacon_period));
+
+	beacon_period &= ~ATH9K_BEACON_ENA;
+	if (beacon_period & ATH9K_BEACON_RESET_TSF) {
+		beacon_period &= ~ATH9K_BEACON_RESET_TSF;
+		ath9k_hw_reset_tsf(ah);
+	}
+
+	REG_SET_BIT(ah, AR_TIMER_MODE, flags);
+}
+
+void
+ath9k_hw_set_sta_beacon_timers(struct ath_hal *ah,
+			       const struct ath9k_beacon_state *bs)
+{
+	u32 nextTbtt, beaconintval, dtimperiod, beacontimeout;
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+	REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(bs->bs_nexttbtt));
+
+	REG_WRITE(ah, AR_BEACON_PERIOD,
+		  TU_TO_USEC(bs->bs_intval & ATH9K_BEACON_PERIOD));
+	REG_WRITE(ah, AR_DMA_BEACON_PERIOD,
+		  TU_TO_USEC(bs->bs_intval & ATH9K_BEACON_PERIOD));
+
+	REG_RMW_FIELD(ah, AR_RSSI_THR,
+		      AR_RSSI_THR_BM_THR, bs->bs_bmissthreshold);
+
+	beaconintval = bs->bs_intval & ATH9K_BEACON_PERIOD;
+
+	if (bs->bs_sleepduration > beaconintval)
+		beaconintval = bs->bs_sleepduration;
+
+	dtimperiod = bs->bs_dtimperiod;
+	if (bs->bs_sleepduration > dtimperiod)
+		dtimperiod = bs->bs_sleepduration;
+
+	if (beaconintval == dtimperiod)
+		nextTbtt = bs->bs_nextdtim;
+	else
+		nextTbtt = bs->bs_nexttbtt;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "%s: next DTIM %d\n", __func__,
+		 bs->bs_nextdtim);
+	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "%s: next beacon %d\n", __func__,
+		 nextTbtt);
+	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "%s: beacon period %d\n", __func__,
+		 beaconintval);
+	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "%s: DTIM period %d\n", __func__,
+		 dtimperiod);
+
+	REG_WRITE(ah, AR_NEXT_DTIM,
+		  TU_TO_USEC(bs->bs_nextdtim - SLEEP_SLOP));
+	REG_WRITE(ah, AR_NEXT_TIM, TU_TO_USEC(nextTbtt - SLEEP_SLOP));
+
+	REG_WRITE(ah, AR_SLEEP1,
+		  SM((CAB_TIMEOUT_VAL << 3), AR_SLEEP1_CAB_TIMEOUT)
+		  | AR_SLEEP1_ASSUME_DTIM);
+
+	if (pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)
+		beacontimeout = (BEACON_TIMEOUT_VAL << 3);
+	else
+		beacontimeout = MIN_BEACON_TIMEOUT_VAL;
+
+	REG_WRITE(ah, AR_SLEEP2,
+		  SM(beacontimeout, AR_SLEEP2_BEACON_TIMEOUT));
+
+	REG_WRITE(ah, AR_TIM_PERIOD, TU_TO_USEC(beaconintval));
+	REG_WRITE(ah, AR_DTIM_PERIOD, TU_TO_USEC(dtimperiod));
+
+	REG_SET_BIT(ah, AR_TIMER_MODE,
+		    AR_TBTT_TIMER_EN | AR_TIM_TIMER_EN |
+		    AR_DTIM_TIMER_EN);
+
+}
+
+bool ath9k_hw_keyisvalid(struct ath_hal *ah, u16 entry)
+{
+	if (entry < ah->ah_caps.keycache_size) {
+		u32 val = REG_READ(ah, AR_KEYTABLE_MAC1(entry));
+		if (val & AR_KEYTABLE_VALID)
+			return true;
+	}
+	return false;
+}
+
+bool ath9k_hw_keyreset(struct ath_hal *ah, u16 entry)
+{
+	u32 keyType;
+
+	if (entry >= ah->ah_caps.keycache_size) {
+		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			 "%s: entry %u out of range\n", __func__, entry);
+		return false;
+	}
+	keyType = REG_READ(ah, AR_KEYTABLE_TYPE(entry));
+
+	REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_KEY2(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_KEY3(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_KEY4(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_TYPE(entry), AR_KEYTABLE_TYPE_CLR);
+	REG_WRITE(ah, AR_KEYTABLE_MAC0(entry), 0);
+	REG_WRITE(ah, AR_KEYTABLE_MAC1(entry), 0);
+
+	if (keyType == AR_KEYTABLE_TYPE_TKIP && ATH9K_IS_MIC_ENABLED(ah)) {
+		u16 micentry = entry + 64;
+
+		REG_WRITE(ah, AR_KEYTABLE_KEY0(micentry), 0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY1(micentry), 0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY2(micentry), 0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY3(micentry), 0);
+
+	}
+
+	if (ah->ah_curchan == NULL)
+		return true;
+
+	return true;
+}
+
+bool
+ath9k_hw_keysetmac(struct ath_hal *ah, u16 entry,
+		   const u8 *mac)
+{
+	u32 macHi, macLo;
+
+	if (entry >= ah->ah_caps.keycache_size) {
+		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			 "%s: entry %u out of range\n", __func__, entry);
+		return false;
+	}
+
+	if (mac != NULL) {
+		macHi = (mac[5] << 8) | mac[4];
+		macLo = (mac[3] << 24) | (mac[2] << 16)
+			| (mac[1] << 8) | mac[0];
+		macLo >>= 1;
+		macLo |= (macHi & 1) << 31;
+		macHi >>= 1;
+	} else {
+		macLo = macHi = 0;
+	}
+	REG_WRITE(ah, AR_KEYTABLE_MAC0(entry), macLo);
+	REG_WRITE(ah, AR_KEYTABLE_MAC1(entry), macHi | AR_KEYTABLE_VALID);
+
+	return true;
+}
+
+bool
+ath9k_hw_set_keycache_entry(struct ath_hal *ah, u16 entry,
+			    const struct ath9k_keyval *k,
+			    const u8 *mac, int xorKey)
+{
+	const struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	u32 key0, key1, key2, key3, key4;
+	u32 keyType;
+	u32 xorMask = xorKey ?
+		(ATH9K_KEY_XOR << 24 | ATH9K_KEY_XOR << 16 | ATH9K_KEY_XOR << 8
+		 | ATH9K_KEY_XOR) : 0;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (entry >= pCap->keycache_size) {
+		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			 "%s: entry %u out of range\n", __func__, entry);
+		return false;
+	}
+	switch (k->kv_type) {
+	case ATH9K_CIPHER_AES_OCB:
+		keyType = AR_KEYTABLE_TYPE_AES;
+		break;
+	case ATH9K_CIPHER_AES_CCM:
+		if (!(pCap->hw_caps & ATH9K_HW_CAP_CIPHER_AESCCM)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+				 "%s: AES-CCM not supported by "
+				 "mac rev 0x%x\n", __func__,
+				 ah->ah_macRev);
+			return false;
+		}
+		keyType = AR_KEYTABLE_TYPE_CCM;
+		break;
+	case ATH9K_CIPHER_TKIP:
+		keyType = AR_KEYTABLE_TYPE_TKIP;
+		if (ATH9K_IS_MIC_ENABLED(ah)
+		    && entry + 64 >= pCap->keycache_size) {
+			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+				 "%s: entry %u inappropriate for TKIP\n",
+				 __func__, entry);
+			return false;
+		}
+		break;
+	case ATH9K_CIPHER_WEP:
+		if (k->kv_len < LEN_WEP40) {
+			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+				 "%s: WEP key length %u too small\n",
+				 __func__, k->kv_len);
+			return false;
+		}
+		if (k->kv_len <= LEN_WEP40)
+			keyType = AR_KEYTABLE_TYPE_40;
+		else if (k->kv_len <= LEN_WEP104)
+			keyType = AR_KEYTABLE_TYPE_104;
+		else
+			keyType = AR_KEYTABLE_TYPE_128;
+		break;
+	case ATH9K_CIPHER_CLR:
+		keyType = AR_KEYTABLE_TYPE_CLR;
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			 "%s: cipher %u not supported\n", __func__,
+			 k->kv_type);
+		return false;
+	}
+
+	key0 = get_unaligned_le32(k->kv_val + 0) ^ xorMask;
+	key1 = (get_unaligned_le16(k->kv_val + 4) ^ xorMask) & 0xffff;
+	key2 = get_unaligned_le32(k->kv_val + 6) ^ xorMask;
+	key3 = (get_unaligned_le16(k->kv_val + 10) ^ xorMask) & 0xffff;
+	key4 = get_unaligned_le32(k->kv_val + 12) ^ xorMask;
+	if (k->kv_len <= LEN_WEP104)
+		key4 &= 0xff;
+
+	if (keyType == AR_KEYTABLE_TYPE_TKIP && ATH9K_IS_MIC_ENABLED(ah)) {
+		u16 micentry = entry + 64;
+
+		REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), ~key0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), ~key1);
+		REG_WRITE(ah, AR_KEYTABLE_KEY2(entry), key2);
+		REG_WRITE(ah, AR_KEYTABLE_KEY3(entry), key3);
+		REG_WRITE(ah, AR_KEYTABLE_KEY4(entry), key4);
+		REG_WRITE(ah, AR_KEYTABLE_TYPE(entry), keyType);
+		(void) ath9k_hw_keysetmac(ah, entry, mac);
+
+		if (ahp->ah_miscMode & AR_PCU_MIC_NEW_LOC_ENA) {
+			u32 mic0, mic1, mic2, mic3, mic4;
+
+			mic0 = get_unaligned_le32(k->kv_mic + 0);
+			mic2 = get_unaligned_le32(k->kv_mic + 4);
+			mic1 = get_unaligned_le16(k->kv_txmic + 2) & 0xffff;
+			mic3 = get_unaligned_le16(k->kv_txmic + 0) & 0xffff;
+			mic4 = get_unaligned_le32(k->kv_txmic + 4);
+			REG_WRITE(ah, AR_KEYTABLE_KEY0(micentry), mic0);
+			REG_WRITE(ah, AR_KEYTABLE_KEY1(micentry), mic1);
+			REG_WRITE(ah, AR_KEYTABLE_KEY2(micentry), mic2);
+			REG_WRITE(ah, AR_KEYTABLE_KEY3(micentry), mic3);
+			REG_WRITE(ah, AR_KEYTABLE_KEY4(micentry), mic4);
+			REG_WRITE(ah, AR_KEYTABLE_TYPE(micentry),
+				  AR_KEYTABLE_TYPE_CLR);
+
+		} else {
+			u32 mic0, mic2;
+
+			mic0 = get_unaligned_le32(k->kv_mic + 0);
+			mic2 = get_unaligned_le32(k->kv_mic + 4);
+			REG_WRITE(ah, AR_KEYTABLE_KEY0(micentry), mic0);
+			REG_WRITE(ah, AR_KEYTABLE_KEY1(micentry), 0);
+			REG_WRITE(ah, AR_KEYTABLE_KEY2(micentry), mic2);
+			REG_WRITE(ah, AR_KEYTABLE_KEY3(micentry), 0);
+			REG_WRITE(ah, AR_KEYTABLE_KEY4(micentry), 0);
+			REG_WRITE(ah, AR_KEYTABLE_TYPE(micentry),
+				  AR_KEYTABLE_TYPE_CLR);
+		}
+		REG_WRITE(ah, AR_KEYTABLE_MAC0(micentry), 0);
+		REG_WRITE(ah, AR_KEYTABLE_MAC1(micentry), 0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), key0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), key1);
+	} else {
+		REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), key0);
+		REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), key1);
+		REG_WRITE(ah, AR_KEYTABLE_KEY2(entry), key2);
+		REG_WRITE(ah, AR_KEYTABLE_KEY3(entry), key3);
+		REG_WRITE(ah, AR_KEYTABLE_KEY4(entry), key4);
+		REG_WRITE(ah, AR_KEYTABLE_TYPE(entry), keyType);
+
+		(void) ath9k_hw_keysetmac(ah, entry, mac);
+	}
+
+	if (ah->ah_curchan == NULL)
+		return true;
+
+	return true;
+}
+
+bool
+ath9k_hw_updatetxtriglevel(struct ath_hal *ah, bool bIncTrigLevel)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 txcfg, curLevel, newLevel;
+	enum ath9k_int omask;
+
+	if (ah->ah_txTrigLevel >= MAX_TX_FIFO_THRESHOLD)
+		return false;
+
+	omask = ath9k_hw_set_interrupts(ah,
+					ahp->ah_maskReg & ~ATH9K_INT_GLOBAL);
+
+	txcfg = REG_READ(ah, AR_TXCFG);
+	curLevel = MS(txcfg, AR_FTRIG);
+	newLevel = curLevel;
+	if (bIncTrigLevel) {
+		if (curLevel < MAX_TX_FIFO_THRESHOLD)
+			newLevel++;
+	} else if (curLevel > MIN_TX_FIFO_THRESHOLD)
+		newLevel--;
+	if (newLevel != curLevel)
+		REG_WRITE(ah, AR_TXCFG,
+			  (txcfg & ~AR_FTRIG) | SM(newLevel, AR_FTRIG));
+
+	ath9k_hw_set_interrupts(ah, omask);
+
+	ah->ah_txTrigLevel = newLevel;
+
+	return newLevel != curLevel;
+}
+
+bool ath9k_hw_set_txq_props(struct ath_hal *ah, int q,
+			    const struct ath9k_tx_queue_info *qinfo)
+{
+	u32 cw;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	struct ath9k_tx_queue_info *qi;
+
+	if (q >= pCap->total_queues) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: invalid queue num %u\n",
+			 __func__, q);
+		return false;
+	}
+
+	qi = &ahp->ah_txq[q];
+	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: inactive queue\n",
+			 __func__);
+		return false;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: queue %p\n", __func__, qi);
+
+	qi->tqi_ver = qinfo->tqi_ver;
+	qi->tqi_subtype = qinfo->tqi_subtype;
+	qi->tqi_qflags = qinfo->tqi_qflags;
+	qi->tqi_priority = qinfo->tqi_priority;
+	if (qinfo->tqi_aifs != ATH9K_TXQ_USEDEFAULT)
+		qi->tqi_aifs = min(qinfo->tqi_aifs, 255U);
+	else
+		qi->tqi_aifs = INIT_AIFS;
+	if (qinfo->tqi_cwmin != ATH9K_TXQ_USEDEFAULT) {
+		cw = min(qinfo->tqi_cwmin, 1024U);
+		qi->tqi_cwmin = 1;
+		while (qi->tqi_cwmin < cw)
+			qi->tqi_cwmin = (qi->tqi_cwmin << 1) | 1;
+	} else
+		qi->tqi_cwmin = qinfo->tqi_cwmin;
+	if (qinfo->tqi_cwmax != ATH9K_TXQ_USEDEFAULT) {
+		cw = min(qinfo->tqi_cwmax, 1024U);
+		qi->tqi_cwmax = 1;
+		while (qi->tqi_cwmax < cw)
+			qi->tqi_cwmax = (qi->tqi_cwmax << 1) | 1;
+	} else
+		qi->tqi_cwmax = INIT_CWMAX;
+
+	if (qinfo->tqi_shretry != 0)
+		qi->tqi_shretry = min((u32) qinfo->tqi_shretry, 15U);
+	else
+		qi->tqi_shretry = INIT_SH_RETRY;
+	if (qinfo->tqi_lgretry != 0)
+		qi->tqi_lgretry = min((u32) qinfo->tqi_lgretry, 15U);
+	else
+		qi->tqi_lgretry = INIT_LG_RETRY;
+	qi->tqi_cbrPeriod = qinfo->tqi_cbrPeriod;
+	qi->tqi_cbrOverflowLimit = qinfo->tqi_cbrOverflowLimit;
+	qi->tqi_burstTime = qinfo->tqi_burstTime;
+	qi->tqi_readyTime = qinfo->tqi_readyTime;
+
+	switch (qinfo->tqi_subtype) {
+	case ATH9K_WME_UPSD:
+		if (qi->tqi_type == ATH9K_TX_QUEUE_DATA)
+			qi->tqi_intFlags = ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS;
+		break;
+	default:
+		break;
+	}
+	return true;
+}
+
+bool ath9k_hw_get_txq_props(struct ath_hal *ah, int q,
+			    struct ath9k_tx_queue_info *qinfo)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	struct ath9k_tx_queue_info *qi;
+
+	if (q >= pCap->total_queues) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: invalid queue num %u\n",
+			 __func__, q);
+		return false;
+	}
+
+	qi = &ahp->ah_txq[q];
+	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: inactive queue\n",
+			 __func__);
+		return false;
+	}
+
+	qinfo->tqi_qflags = qi->tqi_qflags;
+	qinfo->tqi_ver = qi->tqi_ver;
+	qinfo->tqi_subtype = qi->tqi_subtype;
+	qinfo->tqi_qflags = qi->tqi_qflags;
+	qinfo->tqi_priority = qi->tqi_priority;
+	qinfo->tqi_aifs = qi->tqi_aifs;
+	qinfo->tqi_cwmin = qi->tqi_cwmin;
+	qinfo->tqi_cwmax = qi->tqi_cwmax;
+	qinfo->tqi_shretry = qi->tqi_shretry;
+	qinfo->tqi_lgretry = qi->tqi_lgretry;
+	qinfo->tqi_cbrPeriod = qi->tqi_cbrPeriod;
+	qinfo->tqi_cbrOverflowLimit = qi->tqi_cbrOverflowLimit;
+	qinfo->tqi_burstTime = qi->tqi_burstTime;
+	qinfo->tqi_readyTime = qi->tqi_readyTime;
+
+	return true;
+}
+
+int
+ath9k_hw_setuptxqueue(struct ath_hal *ah, enum ath9k_tx_queue type,
+		      const struct ath9k_tx_queue_info *qinfo)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_tx_queue_info *qi;
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	int q;
+
+	switch (type) {
+	case ATH9K_TX_QUEUE_BEACON:
+		q = pCap->total_queues - 1;
+		break;
+	case ATH9K_TX_QUEUE_CAB:
+		q = pCap->total_queues - 2;
+		break;
+	case ATH9K_TX_QUEUE_PSPOLL:
+		q = 1;
+		break;
+	case ATH9K_TX_QUEUE_UAPSD:
+		q = pCap->total_queues - 3;
+		break;
+	case ATH9K_TX_QUEUE_DATA:
+		for (q = 0; q < pCap->total_queues; q++)
+			if (ahp->ah_txq[q].tqi_type ==
+			    ATH9K_TX_QUEUE_INACTIVE)
+				break;
+		if (q == pCap->total_queues) {
+			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+				 "%s: no available tx queue\n", __func__);
+			return -1;
+		}
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: bad tx queue type %u\n",
+			 __func__, type);
+		return -1;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: queue %u\n", __func__, q);
+
+	qi = &ahp->ah_txq[q];
+	if (qi->tqi_type != ATH9K_TX_QUEUE_INACTIVE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+			 "%s: tx queue %u already active\n", __func__, q);
+		return -1;
+	}
+	memset(qi, 0, sizeof(struct ath9k_tx_queue_info));
+	qi->tqi_type = type;
+	if (qinfo == NULL) {
+		qi->tqi_qflags =
+			TXQ_FLAG_TXOKINT_ENABLE
+			| TXQ_FLAG_TXERRINT_ENABLE
+			| TXQ_FLAG_TXDESCINT_ENABLE | TXQ_FLAG_TXURNINT_ENABLE;
+		qi->tqi_aifs = INIT_AIFS;
+		qi->tqi_cwmin = ATH9K_TXQ_USEDEFAULT;
+		qi->tqi_cwmax = INIT_CWMAX;
+		qi->tqi_shretry = INIT_SH_RETRY;
+		qi->tqi_lgretry = INIT_LG_RETRY;
+		qi->tqi_physCompBuf = 0;
+	} else {
+		qi->tqi_physCompBuf = qinfo->tqi_physCompBuf;
+		(void) ath9k_hw_set_txq_props(ah, q, qinfo);
+	}
+
+	return q;
+}
+
+static void
+ath9k_hw_set_txq_interrupts(struct ath_hal *ah,
+			    struct ath9k_tx_queue_info *qi)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
+		 "%s: tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n",
+		 __func__, ahp->ah_txOkInterruptMask,
+		 ahp->ah_txErrInterruptMask, ahp->ah_txDescInterruptMask,
+		 ahp->ah_txEolInterruptMask, ahp->ah_txUrnInterruptMask);
+
+	REG_WRITE(ah, AR_IMR_S0,
+		  SM(ahp->ah_txOkInterruptMask, AR_IMR_S0_QCU_TXOK)
+		  | SM(ahp->ah_txDescInterruptMask, AR_IMR_S0_QCU_TXDESC));
+	REG_WRITE(ah, AR_IMR_S1,
+		  SM(ahp->ah_txErrInterruptMask, AR_IMR_S1_QCU_TXERR)
+		  | SM(ahp->ah_txEolInterruptMask, AR_IMR_S1_QCU_TXEOL));
+	REG_RMW_FIELD(ah, AR_IMR_S2,
+		      AR_IMR_S2_QCU_TXURN, ahp->ah_txUrnInterruptMask);
+}
+
+bool ath9k_hw_releasetxqueue(struct ath_hal *ah, u32 q)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	struct ath9k_tx_queue_info *qi;
+
+	if (q >= pCap->total_queues) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: invalid queue num %u\n",
+			 __func__, q);
+		return false;
+	}
+	qi = &ahp->ah_txq[q];
+	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: inactive queue %u\n",
+			 __func__, q);
+		return false;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: release queue %u\n",
+		__func__, q);
+
+	qi->tqi_type = ATH9K_TX_QUEUE_INACTIVE;
+	ahp->ah_txOkInterruptMask &= ~(1 << q);
+	ahp->ah_txErrInterruptMask &= ~(1 << q);
+	ahp->ah_txDescInterruptMask &= ~(1 << q);
+	ahp->ah_txEolInterruptMask &= ~(1 << q);
+	ahp->ah_txUrnInterruptMask &= ~(1 << q);
+	ath9k_hw_set_txq_interrupts(ah, qi);
+
+	return true;
+}
+
+bool ath9k_hw_resettxqueue(struct ath_hal *ah, u32 q)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+	struct ath9k_channel *chan = ah->ah_curchan;
+	struct ath9k_tx_queue_info *qi;
+	u32 cwMin, chanCwMin, value;
+
+	if (q >= pCap->total_queues) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: invalid queue num %u\n",
+			 __func__, q);
+		return false;
+	}
+	qi = &ahp->ah_txq[q];
+	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: inactive queue %u\n",
+			 __func__, q);
+		return true;
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: reset queue %u\n", __func__, q);
+
+	if (qi->tqi_cwmin == ATH9K_TXQ_USEDEFAULT) {
+		if (chan && IS_CHAN_B(chan))
+			chanCwMin = INIT_CWMIN_11B;
+		else
+			chanCwMin = INIT_CWMIN;
+
+		for (cwMin = 1; cwMin < chanCwMin; cwMin = (cwMin << 1) | 1);
+	} else
+		cwMin = qi->tqi_cwmin;
+
+	REG_WRITE(ah, AR_DLCL_IFS(q), SM(cwMin, AR_D_LCL_IFS_CWMIN)
+		  | SM(qi->tqi_cwmax, AR_D_LCL_IFS_CWMAX)
+		  | SM(qi->tqi_aifs, AR_D_LCL_IFS_AIFS));
+
+	REG_WRITE(ah, AR_DRETRY_LIMIT(q),
+		  SM(INIT_SSH_RETRY, AR_D_RETRY_LIMIT_STA_SH)
+		  | SM(INIT_SLG_RETRY, AR_D_RETRY_LIMIT_STA_LG)
+		  | SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH)
+		);
+
+	REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ);
+	REG_WRITE(ah, AR_DMISC(q),
+		  AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x2);
+
+	if (qi->tqi_cbrPeriod) {
+		REG_WRITE(ah, AR_QCBRCFG(q),
+			  SM(qi->tqi_cbrPeriod, AR_Q_CBRCFG_INTERVAL)
+			  | SM(qi->tqi_cbrOverflowLimit,
+			       AR_Q_CBRCFG_OVF_THRESH));
+		REG_WRITE(ah, AR_QMISC(q),
+			  REG_READ(ah,
+				   AR_QMISC(q)) | AR_Q_MISC_FSP_CBR | (qi->
+					tqi_cbrOverflowLimit
+					?
+					AR_Q_MISC_CBR_EXP_CNTR_LIMIT_EN
+					:
+					0));
+	}
+	if (qi->tqi_readyTime && (qi->tqi_type != ATH9K_TX_QUEUE_CAB)) {
+		REG_WRITE(ah, AR_QRDYTIMECFG(q),
+			  SM(qi->tqi_readyTime, AR_Q_RDYTIMECFG_DURATION) |
+			  AR_Q_RDYTIMECFG_EN);
+	}
+
+	REG_WRITE(ah, AR_DCHNTIME(q),
+		  SM(qi->tqi_burstTime, AR_D_CHNTIME_DUR) |
+		  (qi->tqi_burstTime ? AR_D_CHNTIME_EN : 0));
+
+	if (qi->tqi_burstTime
+	    && (qi->tqi_qflags & TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)) {
+		REG_WRITE(ah, AR_QMISC(q),
+			  REG_READ(ah,
+				   AR_QMISC(q)) |
+			  AR_Q_MISC_RDYTIME_EXP_POLICY);
+
+	}
+
+	if (qi->tqi_qflags & TXQ_FLAG_BACKOFF_DISABLE) {
+		REG_WRITE(ah, AR_DMISC(q),
+			  REG_READ(ah, AR_DMISC(q)) |
+			  AR_D_MISC_POST_FR_BKOFF_DIS);
+	}
+	if (qi->tqi_qflags & TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) {
+		REG_WRITE(ah, AR_DMISC(q),
+			  REG_READ(ah, AR_DMISC(q)) |
+			  AR_D_MISC_FRAG_BKOFF_EN);
+	}
+	switch (qi->tqi_type) {
+	case ATH9K_TX_QUEUE_BEACON:
+		REG_WRITE(ah, AR_QMISC(q), REG_READ(ah, AR_QMISC(q))
+			  | AR_Q_MISC_FSP_DBA_GATED
+			  | AR_Q_MISC_BEACON_USE
+			  | AR_Q_MISC_CBR_INCR_DIS1);
+
+		REG_WRITE(ah, AR_DMISC(q), REG_READ(ah, AR_DMISC(q))
+			  | (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL <<
+			     AR_D_MISC_ARB_LOCKOUT_CNTRL_S)
+			  | AR_D_MISC_BEACON_USE
+			  | AR_D_MISC_POST_FR_BKOFF_DIS);
+		break;
+	case ATH9K_TX_QUEUE_CAB:
+		REG_WRITE(ah, AR_QMISC(q), REG_READ(ah, AR_QMISC(q))
+			  | AR_Q_MISC_FSP_DBA_GATED
+			  | AR_Q_MISC_CBR_INCR_DIS1
+			  | AR_Q_MISC_CBR_INCR_DIS0);
+		value = (qi->tqi_readyTime
+			 - (ah->ah_config.sw_beacon_response_time -
+			    ah->ah_config.dma_beacon_response_time)
+			 -
+			 ah->ah_config.additional_swba_backoff) *
+			1024;
+		REG_WRITE(ah, AR_QRDYTIMECFG(q),
+			  value | AR_Q_RDYTIMECFG_EN);
+		REG_WRITE(ah, AR_DMISC(q), REG_READ(ah, AR_DMISC(q))
+			  | (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL <<
+			     AR_D_MISC_ARB_LOCKOUT_CNTRL_S));
+		break;
+	case ATH9K_TX_QUEUE_PSPOLL:
+		REG_WRITE(ah, AR_QMISC(q),
+			  REG_READ(ah,
+				   AR_QMISC(q)) | AR_Q_MISC_CBR_INCR_DIS1);
+		break;
+	case ATH9K_TX_QUEUE_UAPSD:
+		REG_WRITE(ah, AR_DMISC(q), REG_READ(ah, AR_DMISC(q))
+			  | AR_D_MISC_POST_FR_BKOFF_DIS);
+		break;
+	default:
+		break;
+	}
+
+	if (qi->tqi_intFlags & ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS) {
+		REG_WRITE(ah, AR_DMISC(q),
+			  REG_READ(ah, AR_DMISC(q)) |
+			  SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL,
+			     AR_D_MISC_ARB_LOCKOUT_CNTRL) |
+			  AR_D_MISC_POST_FR_BKOFF_DIS);
+	}
+
+	if (qi->tqi_qflags & TXQ_FLAG_TXOKINT_ENABLE)
+		ahp->ah_txOkInterruptMask |= 1 << q;
+	else
+		ahp->ah_txOkInterruptMask &= ~(1 << q);
+	if (qi->tqi_qflags & TXQ_FLAG_TXERRINT_ENABLE)
+		ahp->ah_txErrInterruptMask |= 1 << q;
+	else
+		ahp->ah_txErrInterruptMask &= ~(1 << q);
+	if (qi->tqi_qflags & TXQ_FLAG_TXDESCINT_ENABLE)
+		ahp->ah_txDescInterruptMask |= 1 << q;
+	else
+		ahp->ah_txDescInterruptMask &= ~(1 << q);
+	if (qi->tqi_qflags & TXQ_FLAG_TXEOLINT_ENABLE)
+		ahp->ah_txEolInterruptMask |= 1 << q;
+	else
+		ahp->ah_txEolInterruptMask &= ~(1 << q);
+	if (qi->tqi_qflags & TXQ_FLAG_TXURNINT_ENABLE)
+		ahp->ah_txUrnInterruptMask |= 1 << q;
+	else
+		ahp->ah_txUrnInterruptMask &= ~(1 << q);
+	ath9k_hw_set_txq_interrupts(ah, qi);
+
+	return true;
+}
+
+void ath9k_hw_gettxintrtxqs(struct ath_hal *ah, u32 *txqs)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	*txqs &= ahp->ah_intrTxqs;
+	ahp->ah_intrTxqs &= ~(*txqs);
+}
+
+bool
+ath9k_hw_filltxdesc(struct ath_hal *ah, struct ath_desc *ds,
+		    u32 segLen, bool firstSeg,
+		    bool lastSeg, const struct ath_desc *ds0)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	if (firstSeg) {
+		ads->ds_ctl1 |= segLen | (lastSeg ? 0 : AR_TxMore);
+	} else if (lastSeg) {
+		ads->ds_ctl0 = 0;
+		ads->ds_ctl1 = segLen;
+		ads->ds_ctl2 = AR5416DESC_CONST(ds0)->ds_ctl2;
+		ads->ds_ctl3 = AR5416DESC_CONST(ds0)->ds_ctl3;
+	} else {
+		ads->ds_ctl0 = 0;
+		ads->ds_ctl1 = segLen | AR_TxMore;
+		ads->ds_ctl2 = 0;
+		ads->ds_ctl3 = 0;
+	}
+	ads->ds_txstatus0 = ads->ds_txstatus1 = 0;
+	ads->ds_txstatus2 = ads->ds_txstatus3 = 0;
+	ads->ds_txstatus4 = ads->ds_txstatus5 = 0;
+	ads->ds_txstatus6 = ads->ds_txstatus7 = 0;
+	ads->ds_txstatus8 = ads->ds_txstatus9 = 0;
+	return true;
+}
+
+void ath9k_hw_cleartxdesc(struct ath_hal *ah, struct ath_desc *ds)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	ads->ds_txstatus0 = ads->ds_txstatus1 = 0;
+	ads->ds_txstatus2 = ads->ds_txstatus3 = 0;
+	ads->ds_txstatus4 = ads->ds_txstatus5 = 0;
+	ads->ds_txstatus6 = ads->ds_txstatus7 = 0;
+	ads->ds_txstatus8 = ads->ds_txstatus9 = 0;
+}
+
+int
+ath9k_hw_txprocdesc(struct ath_hal *ah, struct ath_desc *ds)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	if ((ads->ds_txstatus9 & AR_TxDone) == 0)
+		return -EINPROGRESS;
+
+	ds->ds_txstat.ts_seqnum = MS(ads->ds_txstatus9, AR_SeqNum);
+	ds->ds_txstat.ts_tstamp = ads->AR_SendTimestamp;
+	ds->ds_txstat.ts_status = 0;
+	ds->ds_txstat.ts_flags = 0;
+
+	if (ads->ds_txstatus1 & AR_ExcessiveRetries)
+		ds->ds_txstat.ts_status |= ATH9K_TXERR_XRETRY;
+	if (ads->ds_txstatus1 & AR_Filtered)
+		ds->ds_txstat.ts_status |= ATH9K_TXERR_FILT;
+	if (ads->ds_txstatus1 & AR_FIFOUnderrun)
+		ds->ds_txstat.ts_status |= ATH9K_TXERR_FIFO;
+	if (ads->ds_txstatus9 & AR_TxOpExceeded)
+		ds->ds_txstat.ts_status |= ATH9K_TXERR_XTXOP;
+	if (ads->ds_txstatus1 & AR_TxTimerExpired)
+		ds->ds_txstat.ts_status |= ATH9K_TXERR_TIMER_EXPIRED;
+
+	if (ads->ds_txstatus1 & AR_DescCfgErr)
+		ds->ds_txstat.ts_flags |= ATH9K_TX_DESC_CFG_ERR;
+	if (ads->ds_txstatus1 & AR_TxDataUnderrun) {
+		ds->ds_txstat.ts_flags |= ATH9K_TX_DATA_UNDERRUN;
+		ath9k_hw_updatetxtriglevel(ah, true);
+	}
+	if (ads->ds_txstatus1 & AR_TxDelimUnderrun) {
+		ds->ds_txstat.ts_flags |= ATH9K_TX_DELIM_UNDERRUN;
+		ath9k_hw_updatetxtriglevel(ah, true);
+	}
+	if (ads->ds_txstatus0 & AR_TxBaStatus) {
+		ds->ds_txstat.ts_flags |= ATH9K_TX_BA;
+		ds->ds_txstat.ba_low = ads->AR_BaBitmapLow;
+		ds->ds_txstat.ba_high = ads->AR_BaBitmapHigh;
+	}
+
+	ds->ds_txstat.ts_rateindex = MS(ads->ds_txstatus9, AR_FinalTxIdx);
+	switch (ds->ds_txstat.ts_rateindex) {
+	case 0:
+		ds->ds_txstat.ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate0);
+		break;
+	case 1:
+		ds->ds_txstat.ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate1);
+		break;
+	case 2:
+		ds->ds_txstat.ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate2);
+		break;
+	case 3:
+		ds->ds_txstat.ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate3);
+		break;
+	}
+
+	ds->ds_txstat.ts_rssi = MS(ads->ds_txstatus5, AR_TxRSSICombined);
+	ds->ds_txstat.ts_rssi_ctl0 = MS(ads->ds_txstatus0, AR_TxRSSIAnt00);
+	ds->ds_txstat.ts_rssi_ctl1 = MS(ads->ds_txstatus0, AR_TxRSSIAnt01);
+	ds->ds_txstat.ts_rssi_ctl2 = MS(ads->ds_txstatus0, AR_TxRSSIAnt02);
+	ds->ds_txstat.ts_rssi_ext0 = MS(ads->ds_txstatus5, AR_TxRSSIAnt10);
+	ds->ds_txstat.ts_rssi_ext1 = MS(ads->ds_txstatus5, AR_TxRSSIAnt11);
+	ds->ds_txstat.ts_rssi_ext2 = MS(ads->ds_txstatus5, AR_TxRSSIAnt12);
+	ds->ds_txstat.evm0 = ads->AR_TxEVM0;
+	ds->ds_txstat.evm1 = ads->AR_TxEVM1;
+	ds->ds_txstat.evm2 = ads->AR_TxEVM2;
+	ds->ds_txstat.ts_shortretry = MS(ads->ds_txstatus1, AR_RTSFailCnt);
+	ds->ds_txstat.ts_longretry = MS(ads->ds_txstatus1, AR_DataFailCnt);
+	ds->ds_txstat.ts_virtcol = MS(ads->ds_txstatus1, AR_VirtRetryCnt);
+	ds->ds_txstat.ts_antenna = 1;
+
+	return 0;
+}
+
+void
+ath9k_hw_set11n_txdesc(struct ath_hal *ah, struct ath_desc *ds,
+		       u32 pktLen, enum ath9k_pkt_type type, u32 txPower,
+		       u32 keyIx, enum ath9k_key_type keyType, u32 flags)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	txPower += ahp->ah_txPowerIndexOffset;
+	if (txPower > 63)
+		txPower = 63;
+
+	ads->ds_ctl0 = (pktLen & AR_FrameLen)
+		| (flags & ATH9K_TXDESC_VMF ? AR_VirtMoreFrag : 0)
+		| SM(txPower, AR_XmitPower)
+		| (flags & ATH9K_TXDESC_VEOL ? AR_VEOL : 0)
+		| (flags & ATH9K_TXDESC_CLRDMASK ? AR_ClrDestMask : 0)
+		| (flags & ATH9K_TXDESC_INTREQ ? AR_TxIntrReq : 0)
+		| (keyIx != ATH9K_TXKEYIX_INVALID ? AR_DestIdxValid : 0);
+
+	ads->ds_ctl1 =
+		(keyIx != ATH9K_TXKEYIX_INVALID ? SM(keyIx, AR_DestIdx) : 0)
+		| SM(type, AR_FrameType)
+		| (flags & ATH9K_TXDESC_NOACK ? AR_NoAck : 0)
+		| (flags & ATH9K_TXDESC_EXT_ONLY ? AR_ExtOnly : 0)
+		| (flags & ATH9K_TXDESC_EXT_AND_CTL ? AR_ExtAndCtl : 0);
+
+	ads->ds_ctl6 = SM(keyType, AR_EncrType);
+
+	if (AR_SREV_9285(ah)) {
+
+		ads->ds_ctl8 = 0;
+		ads->ds_ctl9 = 0;
+		ads->ds_ctl10 = 0;
+		ads->ds_ctl11 = 0;
+	}
+}
+
+void
+ath9k_hw_set11n_ratescenario(struct ath_hal *ah, struct ath_desc *ds,
+			     struct ath_desc *lastds,
+			     u32 durUpdateEn, u32 rtsctsRate,
+			     u32 rtsctsDuration,
+			     struct ath9k_11n_rate_series series[],
+			     u32 nseries, u32 flags)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+	struct ar5416_desc *last_ads = AR5416DESC(lastds);
+	u32 ds_ctl0;
+
+	(void) nseries;
+	(void) rtsctsDuration;
+
+	if (flags & (ATH9K_TXDESC_RTSENA | ATH9K_TXDESC_CTSENA)) {
+		ds_ctl0 = ads->ds_ctl0;
+
+		if (flags & ATH9K_TXDESC_RTSENA) {
+			ds_ctl0 &= ~AR_CTSEnable;
+			ds_ctl0 |= AR_RTSEnable;
+		} else {
+			ds_ctl0 &= ~AR_RTSEnable;
+			ds_ctl0 |= AR_CTSEnable;
+		}
+
+		ads->ds_ctl0 = ds_ctl0;
+	} else {
+		ads->ds_ctl0 =
+			(ads->ds_ctl0 & ~(AR_RTSEnable | AR_CTSEnable));
+	}
+
+	ads->ds_ctl2 = set11nTries(series, 0)
+		| set11nTries(series, 1)
+		| set11nTries(series, 2)
+		| set11nTries(series, 3)
+		| (durUpdateEn ? AR_DurUpdateEna : 0)
+		| SM(0, AR_BurstDur);
+
+	ads->ds_ctl3 = set11nRate(series, 0)
+		| set11nRate(series, 1)
+		| set11nRate(series, 2)
+		| set11nRate(series, 3);
+
+	ads->ds_ctl4 = set11nPktDurRTSCTS(series, 0)
+		| set11nPktDurRTSCTS(series, 1);
+
+	ads->ds_ctl5 = set11nPktDurRTSCTS(series, 2)
+		| set11nPktDurRTSCTS(series, 3);
+
+	ads->ds_ctl7 = set11nRateFlags(series, 0)
+		| set11nRateFlags(series, 1)
+		| set11nRateFlags(series, 2)
+		| set11nRateFlags(series, 3)
+		| SM(rtsctsRate, AR_RTSCTSRate);
+	last_ads->ds_ctl2 = ads->ds_ctl2;
+	last_ads->ds_ctl3 = ads->ds_ctl3;
+}
+
+void
+ath9k_hw_set11n_aggr_first(struct ath_hal *ah, struct ath_desc *ds,
+			   u32 aggrLen)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	ads->ds_ctl1 |= (AR_IsAggr | AR_MoreAggr);
+
+	ads->ds_ctl6 &= ~AR_AggrLen;
+	ads->ds_ctl6 |= SM(aggrLen, AR_AggrLen);
+}
+
+void
+ath9k_hw_set11n_aggr_middle(struct ath_hal *ah, struct ath_desc *ds,
+			    u32 numDelims)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+	unsigned int ctl6;
+
+	ads->ds_ctl1 |= (AR_IsAggr | AR_MoreAggr);
+
+	ctl6 = ads->ds_ctl6;
+	ctl6 &= ~AR_PadDelim;
+	ctl6 |= SM(numDelims, AR_PadDelim);
+	ads->ds_ctl6 = ctl6;
+}
+
+void ath9k_hw_set11n_aggr_last(struct ath_hal *ah, struct ath_desc *ds)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	ads->ds_ctl1 |= AR_IsAggr;
+	ads->ds_ctl1 &= ~AR_MoreAggr;
+	ads->ds_ctl6 &= ~AR_PadDelim;
+}
+
+void ath9k_hw_clr11n_aggr(struct ath_hal *ah, struct ath_desc *ds)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	ads->ds_ctl1 &= (~AR_IsAggr & ~AR_MoreAggr);
+}
+
+void
+ath9k_hw_set11n_burstduration(struct ath_hal *ah, struct ath_desc *ds,
+			      u32 burstDuration)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	ads->ds_ctl2 &= ~AR_BurstDur;
+	ads->ds_ctl2 |= SM(burstDuration, AR_BurstDur);
+}
+
+void
+ath9k_hw_set11n_virtualmorefrag(struct ath_hal *ah, struct ath_desc *ds,
+				u32 vmf)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+
+	if (vmf)
+		ads->ds_ctl0 |= AR_VirtMoreFrag;
+	else
+		ads->ds_ctl0 &= ~AR_VirtMoreFrag;
+}
+
+void ath9k_hw_putrxbuf(struct ath_hal *ah, u32 rxdp)
+{
+	REG_WRITE(ah, AR_RXDP, rxdp);
+}
+
+void ath9k_hw_rxena(struct ath_hal *ah)
+{
+	REG_WRITE(ah, AR_CR, AR_CR_RXE);
+}
+
+bool ath9k_hw_setrxabort(struct ath_hal *ah, bool set)
+{
+	if (set) {
+
+		REG_SET_BIT(ah, AR_DIAG_SW,
+			    (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
+
+		if (!ath9k_hw_wait
+		    (ah, AR_OBS_BUS_1, AR_OBS_BUS_1_RX_STATE, 0)) {
+			u32 reg;
+
+			REG_CLR_BIT(ah, AR_DIAG_SW,
+				    (AR_DIAG_RX_DIS |
+				     AR_DIAG_RX_ABORT));
+
+			reg = REG_READ(ah, AR_OBS_BUS_1);
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				"%s: rx failed to go idle in 10 ms RXSM=0x%x\n",
+				__func__, reg);
+
+			return false;
+		}
+	} else {
+		REG_CLR_BIT(ah, AR_DIAG_SW,
+			    (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
+	}
+
+	return true;
+}
+
+void
+ath9k_hw_setmcastfilter(struct ath_hal *ah, u32 filter0,
+			u32 filter1)
+{
+	REG_WRITE(ah, AR_MCAST_FIL0, filter0);
+	REG_WRITE(ah, AR_MCAST_FIL1, filter1);
+}
+
+bool
+ath9k_hw_setuprxdesc(struct ath_hal *ah, struct ath_desc *ds,
+		     u32 size, u32 flags)
+{
+	struct ar5416_desc *ads = AR5416DESC(ds);
+	struct ath9k_hw_capabilities *pCap = &ah->ah_caps;
+
+	ads->ds_ctl1 = size & AR_BufLen;
+	if (flags & ATH9K_RXDESC_INTREQ)
+		ads->ds_ctl1 |= AR_RxIntrReq;
+
+	ads->ds_rxstatus8 &= ~AR_RxDone;
+	if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
+		memset(&(ads->u), 0, sizeof(ads->u));
+	return true;
+}
+
+int
+ath9k_hw_rxprocdesc(struct ath_hal *ah, struct ath_desc *ds,
+		    u32 pa, struct ath_desc *nds, u64 tsf)
+{
+	struct ar5416_desc ads;
+	struct ar5416_desc *adsp = AR5416DESC(ds);
+
+	if ((adsp->ds_rxstatus8 & AR_RxDone) == 0)
+		return -EINPROGRESS;
+
+	ads.u.rx = adsp->u.rx;
+
+	ds->ds_rxstat.rs_status = 0;
+	ds->ds_rxstat.rs_flags = 0;
+
+	ds->ds_rxstat.rs_datalen = ads.ds_rxstatus1 & AR_DataLen;
+	ds->ds_rxstat.rs_tstamp = ads.AR_RcvTimestamp;
+
+	ds->ds_rxstat.rs_rssi = MS(ads.ds_rxstatus4, AR_RxRSSICombined);
+	ds->ds_rxstat.rs_rssi_ctl0 = MS(ads.ds_rxstatus0, AR_RxRSSIAnt00);
+	ds->ds_rxstat.rs_rssi_ctl1 = MS(ads.ds_rxstatus0, AR_RxRSSIAnt01);
+	ds->ds_rxstat.rs_rssi_ctl2 = MS(ads.ds_rxstatus0, AR_RxRSSIAnt02);
+	ds->ds_rxstat.rs_rssi_ext0 = MS(ads.ds_rxstatus4, AR_RxRSSIAnt10);
+	ds->ds_rxstat.rs_rssi_ext1 = MS(ads.ds_rxstatus4, AR_RxRSSIAnt11);
+	ds->ds_rxstat.rs_rssi_ext2 = MS(ads.ds_rxstatus4, AR_RxRSSIAnt12);
+	if (ads.ds_rxstatus8 & AR_RxKeyIdxValid)
+		ds->ds_rxstat.rs_keyix = MS(ads.ds_rxstatus8, AR_KeyIdx);
+	else
+		ds->ds_rxstat.rs_keyix = ATH9K_RXKEYIX_INVALID;
+
+	ds->ds_rxstat.rs_rate = RXSTATUS_RATE(ah, (&ads));
+	ds->ds_rxstat.rs_more = (ads.ds_rxstatus1 & AR_RxMore) ? 1 : 0;
+
+	ds->ds_rxstat.rs_isaggr = (ads.ds_rxstatus8 & AR_RxAggr) ? 1 : 0;
+	ds->ds_rxstat.rs_moreaggr =
+		(ads.ds_rxstatus8 & AR_RxMoreAggr) ? 1 : 0;
+	ds->ds_rxstat.rs_antenna = MS(ads.ds_rxstatus3, AR_RxAntenna);
+	ds->ds_rxstat.rs_flags =
+		(ads.ds_rxstatus3 & AR_GI) ? ATH9K_RX_GI : 0;
+	ds->ds_rxstat.rs_flags |=
+		(ads.ds_rxstatus3 & AR_2040) ? ATH9K_RX_2040 : 0;
+
+	if (ads.ds_rxstatus8 & AR_PreDelimCRCErr)
+		ds->ds_rxstat.rs_flags |= ATH9K_RX_DELIM_CRC_PRE;
+	if (ads.ds_rxstatus8 & AR_PostDelimCRCErr)
+		ds->ds_rxstat.rs_flags |= ATH9K_RX_DELIM_CRC_POST;
+	if (ads.ds_rxstatus8 & AR_DecryptBusyErr)
+		ds->ds_rxstat.rs_flags |= ATH9K_RX_DECRYPT_BUSY;
+
+	if ((ads.ds_rxstatus8 & AR_RxFrameOK) == 0) {
+
+		if (ads.ds_rxstatus8 & AR_CRCErr)
+			ds->ds_rxstat.rs_status |= ATH9K_RXERR_CRC;
+		else if (ads.ds_rxstatus8 & AR_PHYErr) {
+			u32 phyerr;
+
+			ds->ds_rxstat.rs_status |= ATH9K_RXERR_PHY;
+			phyerr = MS(ads.ds_rxstatus8, AR_PHYErrCode);
+			ds->ds_rxstat.rs_phyerr = phyerr;
+		} else if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
+			ds->ds_rxstat.rs_status |= ATH9K_RXERR_DECRYPT;
+		else if (ads.ds_rxstatus8 & AR_MichaelErr)
+			ds->ds_rxstat.rs_status |= ATH9K_RXERR_MIC;
+	}
+
+	return 0;
+}
+
+static void ath9k_hw_setup_rate_table(struct ath_hal *ah,
+				      struct ath9k_rate_table *rt)
+{
+	int i;
+
+	if (rt->rateCodeToIndex[0] != 0)
+		return;
+	for (i = 0; i < 256; i++)
+		rt->rateCodeToIndex[i] = (u8) -1;
+	for (i = 0; i < rt->rateCount; i++) {
+		u8 code = rt->info[i].rateCode;
+		u8 cix = rt->info[i].controlRate;
+
+		rt->rateCodeToIndex[code] = i;
+		rt->rateCodeToIndex[code | rt->info[i].shortPreamble] = i;
+
+		rt->info[i].lpAckDuration =
+			ath9k_hw_computetxtime(ah, rt,
+					       WLAN_CTRL_FRAME_SIZE,
+					       cix,
+					       false);
+		rt->info[i].spAckDuration =
+			ath9k_hw_computetxtime(ah, rt,
+					       WLAN_CTRL_FRAME_SIZE,
+					       cix,
+					       true);
+	}
+}
+
+const struct ath9k_rate_table *ath9k_hw_getratetable(struct ath_hal *ah,
+						   u32 mode)
+{
+	struct ath9k_rate_table *rt;
+	switch (mode) {
+	case ATH9K_MODE_11A:
+		rt = &ar5416_11a_table;
+		break;
+	case ATH9K_MODE_11B:
+		rt = &ar5416_11b_table;
+		break;
+	case ATH9K_MODE_11G:
+		rt = &ar5416_11g_table;
+		break;
+	case ATH9K_MODE_11NG_HT20:
+	case ATH9K_MODE_11NG_HT40PLUS:
+	case ATH9K_MODE_11NG_HT40MINUS:
+		rt = &ar5416_11ng_table;
+		break;
+	case ATH9K_MODE_11NA_HT20:
+	case ATH9K_MODE_11NA_HT40PLUS:
+	case ATH9K_MODE_11NA_HT40MINUS:
+		rt = &ar5416_11na_table;
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, "%s: invalid mode 0x%x\n",
+			 __func__, mode);
+		return NULL;
+	}
+	ath9k_hw_setup_rate_table(ah, rt);
+	return rt;
+}
+
+static const char *ath9k_hw_devname(u16 devid)
+{
+	switch (devid) {
+	case AR5416_DEVID_PCI:
+	case AR5416_DEVID_PCIE:
+		return "Atheros 5416";
+	case AR9160_DEVID_PCI:
+		return "Atheros 9160";
+	case AR9280_DEVID_PCI:
+	case AR9280_DEVID_PCIE:
+		return "Atheros 9280";
+	}
+	return NULL;
+}
+
+const char *ath9k_hw_probe(u16 vendorid, u16 devid)
+{
+	return vendorid == ATHEROS_VENDOR_ID ?
+		ath9k_hw_devname(devid) : NULL;
+}
+
+struct ath_hal *ath9k_hw_attach(u16 devid,
+				struct ath_softc *sc,
+				void __iomem *mem,
+				int *error)
+{
+	struct ath_hal *ah = NULL;
+
+	switch (devid) {
+	case AR5416_DEVID_PCI:
+	case AR5416_DEVID_PCIE:
+	case AR9160_DEVID_PCI:
+	case AR9280_DEVID_PCI:
+	case AR9280_DEVID_PCIE:
+		ah = ath9k_hw_do_attach(devid, sc, mem, error);
+		break;
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+			 "devid=0x%x not supported.\n", devid);
+		ah = NULL;
+		*error = -ENXIO;
+		break;
+	}
+	if (ah != NULL) {
+		ah->ah_devid = ah->ah_devid;
+		ah->ah_subvendorid = ah->ah_subvendorid;
+		ah->ah_macVersion = ah->ah_macVersion;
+		ah->ah_macRev = ah->ah_macRev;
+		ah->ah_phyRev = ah->ah_phyRev;
+		ah->ah_analog5GhzRev = ah->ah_analog5GhzRev;
+		ah->ah_analog2GhzRev = ah->ah_analog2GhzRev;
+	}
+	return ah;
+}
+
+u16
+ath9k_hw_computetxtime(struct ath_hal *ah,
+		       const struct ath9k_rate_table *rates,
+		       u32 frameLen, u16 rateix,
+		       bool shortPreamble)
+{
+	u32 bitsPerSymbol, numBits, numSymbols, phyTime, txTime;
+	u32 kbps;
+
+	kbps = rates->info[rateix].rateKbps;
+
+	if (kbps == 0)
+		return 0;
+	switch (rates->info[rateix].phy) {
+
+	case PHY_CCK:
+		phyTime = CCK_PREAMBLE_BITS + CCK_PLCP_BITS;
+		if (shortPreamble && rates->info[rateix].shortPreamble)
+			phyTime >>= 1;
+		numBits = frameLen << 3;
+		txTime = CCK_SIFS_TIME + phyTime
+			+ ((numBits * 1000) / kbps);
+		break;
+	case PHY_OFDM:
+		if (ah->ah_curchan && IS_CHAN_QUARTER_RATE(ah->ah_curchan)) {
+			bitsPerSymbol =
+				(kbps * OFDM_SYMBOL_TIME_QUARTER) / 1000;
+
+			numBits = OFDM_PLCP_BITS + (frameLen << 3);
+			numSymbols = DIV_ROUND_UP(numBits, bitsPerSymbol);
+			txTime = OFDM_SIFS_TIME_QUARTER
+				+ OFDM_PREAMBLE_TIME_QUARTER
+				+ (numSymbols * OFDM_SYMBOL_TIME_QUARTER);
+		} else if (ah->ah_curchan &&
+			   IS_CHAN_HALF_RATE(ah->ah_curchan)) {
+			bitsPerSymbol =
+				(kbps * OFDM_SYMBOL_TIME_HALF) / 1000;
+
+			numBits = OFDM_PLCP_BITS + (frameLen << 3);
+			numSymbols = DIV_ROUND_UP(numBits, bitsPerSymbol);
+			txTime = OFDM_SIFS_TIME_HALF +
+				OFDM_PREAMBLE_TIME_HALF
+				+ (numSymbols * OFDM_SYMBOL_TIME_HALF);
+		} else {
+			bitsPerSymbol = (kbps * OFDM_SYMBOL_TIME) / 1000;
+
+			numBits = OFDM_PLCP_BITS + (frameLen << 3);
+			numSymbols = DIV_ROUND_UP(numBits, bitsPerSymbol);
+			txTime = OFDM_SIFS_TIME + OFDM_PREAMBLE_TIME
+				+ (numSymbols * OFDM_SYMBOL_TIME);
+		}
+		break;
+
+	default:
+		DPRINTF(ah->ah_sc, ATH_DBG_PHY_IO,
+			 "%s: unknown phy %u (rate ix %u)\n", __func__,
+			 rates->info[rateix].phy, rateix);
+		txTime = 0;
+		break;
+	}
+	return txTime;
+}
+
+u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags)
+{
+	if (flags & CHANNEL_2GHZ) {
+		if (freq == 2484)
+			return 14;
+		if (freq < 2484)
+			return (freq - 2407) / 5;
+		else
+			return 15 + ((freq - 2512) / 20);
+	} else if (flags & CHANNEL_5GHZ) {
+		if (ath9k_regd_is_public_safety_sku(ah) &&
+		    IS_CHAN_IN_PUBLIC_SAFETY_BAND(freq)) {
+			return ((freq * 10) +
+				(((freq % 5) == 2) ? 5 : 0) - 49400) / 5;
+		} else if ((flags & CHANNEL_A) && (freq <= 5000)) {
+			return (freq - 4000) / 5;
+		} else {
+			return (freq - 5000) / 5;
+		}
+	} else {
+		if (freq == 2484)
+			return 14;
+		if (freq < 2484)
+			return (freq - 2407) / 5;
+		if (freq < 5000) {
+			if (ath9k_regd_is_public_safety_sku(ah)
+			    && IS_CHAN_IN_PUBLIC_SAFETY_BAND(freq)) {
+				return ((freq * 10) +
+					(((freq % 5) ==
+					  2) ? 5 : 0) - 49400) / 5;
+			} else if (freq > 4900) {
+				return (freq - 4000) / 5;
+			} else {
+				return 15 + ((freq - 2512) / 20);
+			}
+		}
+		return (freq - 5000) / 5;
+	}
+}
+
+int16_t
+ath9k_hw_getchan_noise(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	struct ath9k_channel *ichan;
+
+	ichan = ath9k_regd_check_channel(ah, chan);
+	if (ichan == NULL) {
+		DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL,
+			 "%s: invalid channel %u/0x%x; no mapping\n",
+			 __func__, chan->channel, chan->channelFlags);
+		return 0;
+	}
+	if (ichan->rawNoiseFloor == 0) {
+		enum wireless_mode mode = ath9k_hw_chan2wmode(ah, chan);
+		return NOISE_FLOOR[mode];
+	} else
+		return ichan->rawNoiseFloor;
+}
+
+bool ath9k_hw_set_tsfadjust(struct ath_hal *ah, u32 setting)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (setting)
+		ahp->ah_miscMode |= AR_PCU_TX_ADD_TSF;
+	else
+		ahp->ah_miscMode &= ~AR_PCU_TX_ADD_TSF;
+	return true;
+}
+
+bool ath9k_hw_phycounters(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	return ahp->ah_hasHwPhyCounters ? true : false;
+}
+
+u32 ath9k_hw_gettxbuf(struct ath_hal *ah, u32 q)
+{
+	return REG_READ(ah, AR_QTXDP(q));
+}
+
+bool ath9k_hw_puttxbuf(struct ath_hal *ah, u32 q,
+		       u32 txdp)
+{
+	REG_WRITE(ah, AR_QTXDP(q), txdp);
+
+	return true;
+}
+
+bool ath9k_hw_txstart(struct ath_hal *ah, u32 q)
+{
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "%s: queue %u\n", __func__, q);
+
+	REG_WRITE(ah, AR_Q_TXE, 1 << q);
+
+	return true;
+}
+
+u32 ath9k_hw_numtxpending(struct ath_hal *ah, u32 q)
+{
+	u32 npend;
+
+	npend = REG_READ(ah, AR_QSTS(q)) & AR_Q_STS_PEND_FR_CNT;
+	if (npend == 0) {
+
+		if (REG_READ(ah, AR_Q_TXE) & (1 << q))
+			npend = 1;
+	}
+	return npend;
+}
+
+bool ath9k_hw_stoptxdma(struct ath_hal *ah, u32 q)
+{
+	u32 wait;
+
+	REG_WRITE(ah, AR_Q_TXD, 1 << q);
+
+	for (wait = 1000; wait != 0; wait--) {
+		if (ath9k_hw_numtxpending(ah, q) == 0)
+			break;
+		udelay(100);
+	}
+
+	if (ath9k_hw_numtxpending(ah, q)) {
+		u32 tsfLow, j;
+
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+			 "%s: Num of pending TX Frames %d on Q %d\n",
+			 __func__, ath9k_hw_numtxpending(ah, q), q);
+
+		for (j = 0; j < 2; j++) {
+			tsfLow = REG_READ(ah, AR_TSF_L32);
+			REG_WRITE(ah, AR_QUIET2,
+				  SM(10, AR_QUIET2_QUIET_DUR));
+			REG_WRITE(ah, AR_QUIET_PERIOD, 100);
+			REG_WRITE(ah, AR_NEXT_QUIET_TIMER, tsfLow >> 10);
+			REG_SET_BIT(ah, AR_TIMER_MODE,
+				       AR_QUIET_TIMER_EN);
+
+			if ((REG_READ(ah, AR_TSF_L32) >> 10) ==
+			    (tsfLow >> 10)) {
+				break;
+			}
+			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+				"%s: TSF have moved while trying to set "
+				"quiet time TSF: 0x%08x\n",
+				__func__, tsfLow);
+		}
+
+		REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
+
+		udelay(200);
+		REG_CLR_BIT(ah, AR_TIMER_MODE, AR_QUIET_TIMER_EN);
+
+		wait = 1000;
+
+		while (ath9k_hw_numtxpending(ah, q)) {
+			if ((--wait) == 0) {
+				DPRINTF(ah->ah_sc, ATH_DBG_XMIT,
+					"%s: Failed to stop Tx DMA in 100 "
+					"msec after killing last frame\n",
+					__func__);
+				break;
+			}
+			udelay(100);
+		}
+
+		REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
+	}
+
+	REG_WRITE(ah, AR_Q_TXD, 0);
+	return wait != 0;
+}
diff --git a/drivers/net/wireless/ath9k/hw.h b/drivers/net/wireless/ath9k/hw.h
new file mode 100644
index 00000000000..ae680f21ba7
--- /dev/null
+++ b/drivers/net/wireless/ath9k/hw.h
@@ -0,0 +1,969 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef HW_H
+#define HW_H
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+struct ar5416_desc {
+	u32 ds_link;
+	u32 ds_data;
+	u32 ds_ctl0;
+	u32 ds_ctl1;
+	union {
+		struct {
+			u32 ctl2;
+			u32 ctl3;
+			u32 ctl4;
+			u32 ctl5;
+			u32 ctl6;
+			u32 ctl7;
+			u32 ctl8;
+			u32 ctl9;
+			u32 ctl10;
+			u32 ctl11;
+			u32 status0;
+			u32 status1;
+			u32 status2;
+			u32 status3;
+			u32 status4;
+			u32 status5;
+			u32 status6;
+			u32 status7;
+			u32 status8;
+			u32 status9;
+		} tx;
+		struct {
+			u32 status0;
+			u32 status1;
+			u32 status2;
+			u32 status3;
+			u32 status4;
+			u32 status5;
+			u32 status6;
+			u32 status7;
+			u32 status8;
+		} rx;
+	} u;
+} __packed;
+
+#define AR5416DESC(_ds)         ((struct ar5416_desc *)(_ds))
+#define AR5416DESC_CONST(_ds)   ((const struct ar5416_desc *)(_ds))
+
+#define ds_ctl2     u.tx.ctl2
+#define ds_ctl3     u.tx.ctl3
+#define ds_ctl4     u.tx.ctl4
+#define ds_ctl5     u.tx.ctl5
+#define ds_ctl6     u.tx.ctl6
+#define ds_ctl7     u.tx.ctl7
+#define ds_ctl8     u.tx.ctl8
+#define ds_ctl9     u.tx.ctl9
+#define ds_ctl10    u.tx.ctl10
+#define ds_ctl11    u.tx.ctl11
+
+#define ds_txstatus0    u.tx.status0
+#define ds_txstatus1    u.tx.status1
+#define ds_txstatus2    u.tx.status2
+#define ds_txstatus3    u.tx.status3
+#define ds_txstatus4    u.tx.status4
+#define ds_txstatus5    u.tx.status5
+#define ds_txstatus6    u.tx.status6
+#define ds_txstatus7    u.tx.status7
+#define ds_txstatus8    u.tx.status8
+#define ds_txstatus9    u.tx.status9
+
+#define ds_rxstatus0    u.rx.status0
+#define ds_rxstatus1    u.rx.status1
+#define ds_rxstatus2    u.rx.status2
+#define ds_rxstatus3    u.rx.status3
+#define ds_rxstatus4    u.rx.status4
+#define ds_rxstatus5    u.rx.status5
+#define ds_rxstatus6    u.rx.status6
+#define ds_rxstatus7    u.rx.status7
+#define ds_rxstatus8    u.rx.status8
+
+#define AR_FrameLen         0x00000fff
+#define AR_VirtMoreFrag     0x00001000
+#define AR_TxCtlRsvd00      0x0000e000
+#define AR_XmitPower        0x003f0000
+#define AR_XmitPower_S      16
+#define AR_RTSEnable        0x00400000
+#define AR_VEOL             0x00800000
+#define AR_ClrDestMask      0x01000000
+#define AR_TxCtlRsvd01      0x1e000000
+#define AR_TxIntrReq        0x20000000
+#define AR_DestIdxValid     0x40000000
+#define AR_CTSEnable        0x80000000
+
+#define AR_BufLen           0x00000fff
+#define AR_TxMore           0x00001000
+#define AR_DestIdx          0x000fe000
+#define AR_DestIdx_S        13
+#define AR_FrameType        0x00f00000
+#define AR_FrameType_S      20
+#define AR_NoAck            0x01000000
+#define AR_InsertTS         0x02000000
+#define AR_CorruptFCS       0x04000000
+#define AR_ExtOnly          0x08000000
+#define AR_ExtAndCtl        0x10000000
+#define AR_MoreAggr         0x20000000
+#define AR_IsAggr           0x40000000
+
+#define AR_BurstDur         0x00007fff
+#define AR_BurstDur_S       0
+#define AR_DurUpdateEna     0x00008000
+#define AR_XmitDataTries0   0x000f0000
+#define AR_XmitDataTries0_S 16
+#define AR_XmitDataTries1   0x00f00000
+#define AR_XmitDataTries1_S 20
+#define AR_XmitDataTries2   0x0f000000
+#define AR_XmitDataTries2_S 24
+#define AR_XmitDataTries3   0xf0000000
+#define AR_XmitDataTries3_S 28
+
+#define AR_XmitRate0        0x000000ff
+#define AR_XmitRate0_S      0
+#define AR_XmitRate1        0x0000ff00
+#define AR_XmitRate1_S      8
+#define AR_XmitRate2        0x00ff0000
+#define AR_XmitRate2_S      16
+#define AR_XmitRate3        0xff000000
+#define AR_XmitRate3_S      24
+
+#define AR_PacketDur0       0x00007fff
+#define AR_PacketDur0_S     0
+#define AR_RTSCTSQual0      0x00008000
+#define AR_PacketDur1       0x7fff0000
+#define AR_PacketDur1_S     16
+#define AR_RTSCTSQual1      0x80000000
+
+#define AR_PacketDur2       0x00007fff
+#define AR_PacketDur2_S     0
+#define AR_RTSCTSQual2      0x00008000
+#define AR_PacketDur3       0x7fff0000
+#define AR_PacketDur3_S     16
+#define AR_RTSCTSQual3      0x80000000
+
+#define AR_AggrLen          0x0000ffff
+#define AR_AggrLen_S        0
+#define AR_TxCtlRsvd60      0x00030000
+#define AR_PadDelim         0x03fc0000
+#define AR_PadDelim_S       18
+#define AR_EncrType         0x0c000000
+#define AR_EncrType_S       26
+#define AR_TxCtlRsvd61      0xf0000000
+
+#define AR_2040_0           0x00000001
+#define AR_GI0              0x00000002
+#define AR_ChainSel0        0x0000001c
+#define AR_ChainSel0_S      2
+#define AR_2040_1           0x00000020
+#define AR_GI1              0x00000040
+#define AR_ChainSel1        0x00000380
+#define AR_ChainSel1_S      7
+#define AR_2040_2           0x00000400
+#define AR_GI2              0x00000800
+#define AR_ChainSel2        0x00007000
+#define AR_ChainSel2_S      12
+#define AR_2040_3           0x00008000
+#define AR_GI3              0x00010000
+#define AR_ChainSel3        0x000e0000
+#define AR_ChainSel3_S      17
+#define AR_RTSCTSRate       0x0ff00000
+#define AR_RTSCTSRate_S     20
+#define AR_TxCtlRsvd70      0xf0000000
+
+#define AR_TxRSSIAnt00      0x000000ff
+#define AR_TxRSSIAnt00_S    0
+#define AR_TxRSSIAnt01      0x0000ff00
+#define AR_TxRSSIAnt01_S    8
+#define AR_TxRSSIAnt02      0x00ff0000
+#define AR_TxRSSIAnt02_S    16
+#define AR_TxStatusRsvd00   0x3f000000
+#define AR_TxBaStatus       0x40000000
+#define AR_TxStatusRsvd01   0x80000000
+
+#define AR_FrmXmitOK            0x00000001
+#define AR_ExcessiveRetries     0x00000002
+#define AR_FIFOUnderrun         0x00000004
+#define AR_Filtered             0x00000008
+#define AR_RTSFailCnt           0x000000f0
+#define AR_RTSFailCnt_S         4
+#define AR_DataFailCnt          0x00000f00
+#define AR_DataFailCnt_S        8
+#define AR_VirtRetryCnt         0x0000f000
+#define AR_VirtRetryCnt_S       12
+#define AR_TxDelimUnderrun      0x00010000
+#define AR_TxDataUnderrun       0x00020000
+#define AR_DescCfgErr           0x00040000
+#define AR_TxTimerExpired       0x00080000
+#define AR_TxStatusRsvd10       0xfff00000
+
+#define AR_SendTimestamp    ds_txstatus2
+#define AR_BaBitmapLow      ds_txstatus3
+#define AR_BaBitmapHigh     ds_txstatus4
+
+#define AR_TxRSSIAnt10      0x000000ff
+#define AR_TxRSSIAnt10_S    0
+#define AR_TxRSSIAnt11      0x0000ff00
+#define AR_TxRSSIAnt11_S    8
+#define AR_TxRSSIAnt12      0x00ff0000
+#define AR_TxRSSIAnt12_S    16
+#define AR_TxRSSICombined   0xff000000
+#define AR_TxRSSICombined_S 24
+
+#define AR_TxEVM0           ds_txstatus5
+#define AR_TxEVM1           ds_txstatus6
+#define AR_TxEVM2           ds_txstatus7
+
+#define AR_TxDone           0x00000001
+#define AR_SeqNum           0x00001ffe
+#define AR_SeqNum_S         1
+#define AR_TxStatusRsvd80   0x0001e000
+#define AR_TxOpExceeded     0x00020000
+#define AR_TxStatusRsvd81   0x001c0000
+#define AR_FinalTxIdx       0x00600000
+#define AR_FinalTxIdx_S     21
+#define AR_TxStatusRsvd82   0x01800000
+#define AR_PowerMgmt        0x02000000
+#define AR_TxStatusRsvd83   0xfc000000
+
+#define AR_RxCTLRsvd00  0xffffffff
+
+#define AR_BufLen       0x00000fff
+#define AR_RxCtlRsvd00  0x00001000
+#define AR_RxIntrReq    0x00002000
+#define AR_RxCtlRsvd01  0xffffc000
+
+#define AR_RxRSSIAnt00      0x000000ff
+#define AR_RxRSSIAnt00_S    0
+#define AR_RxRSSIAnt01      0x0000ff00
+#define AR_RxRSSIAnt01_S    8
+#define AR_RxRSSIAnt02      0x00ff0000
+#define AR_RxRSSIAnt02_S    16
+#define AR_RxRate           0xff000000
+#define AR_RxRate_S         24
+#define AR_RxStatusRsvd00   0xff000000
+
+#define AR_DataLen          0x00000fff
+#define AR_RxMore           0x00001000
+#define AR_NumDelim         0x003fc000
+#define AR_NumDelim_S       14
+#define AR_RxStatusRsvd10   0xff800000
+
+#define AR_RcvTimestamp     ds_rxstatus2
+
+#define AR_GI               0x00000001
+#define AR_2040             0x00000002
+#define AR_Parallel40       0x00000004
+#define AR_Parallel40_S     2
+#define AR_RxStatusRsvd30   0x000000f8
+#define AR_RxAntenna	    0xffffff00
+#define AR_RxAntenna_S	    8
+
+#define AR_RxRSSIAnt10            0x000000ff
+#define AR_RxRSSIAnt10_S          0
+#define AR_RxRSSIAnt11            0x0000ff00
+#define AR_RxRSSIAnt11_S          8
+#define AR_RxRSSIAnt12            0x00ff0000
+#define AR_RxRSSIAnt12_S          16
+#define AR_RxRSSICombined         0xff000000
+#define AR_RxRSSICombined_S       24
+
+#define AR_RxEVM0           ds_rxstatus4
+#define AR_RxEVM1           ds_rxstatus5
+#define AR_RxEVM2           ds_rxstatus6
+
+#define AR_RxDone           0x00000001
+#define AR_RxFrameOK        0x00000002
+#define AR_CRCErr           0x00000004
+#define AR_DecryptCRCErr    0x00000008
+#define AR_PHYErr           0x00000010
+#define AR_MichaelErr       0x00000020
+#define AR_PreDelimCRCErr   0x00000040
+#define AR_RxStatusRsvd70   0x00000080
+#define AR_RxKeyIdxValid    0x00000100
+#define AR_KeyIdx           0x0000fe00
+#define AR_KeyIdx_S         9
+#define AR_PHYErrCode       0x0000ff00
+#define AR_PHYErrCode_S     8
+#define AR_RxMoreAggr       0x00010000
+#define AR_RxAggr           0x00020000
+#define AR_PostDelimCRCErr  0x00040000
+#define AR_RxStatusRsvd71   0x3ff80000
+#define AR_DecryptBusyErr   0x40000000
+#define AR_KeyMiss          0x80000000
+
+#define AR5416_MAGIC        0x19641014
+
+#define RXSTATUS_RATE(ah, ads)  (AR_SREV_5416_V20_OR_LATER(ah) ?	\
+				 MS(ads->ds_rxstatus0, AR_RxRate) :	\
+				 (ads->ds_rxstatus3 >> 2) & 0xFF)
+#define RXSTATUS_DUPLICATE(ah, ads)  (AR_SREV_5416_V20_OR_LATER(ah) ?	\
+				      MS(ads->ds_rxstatus3, AR_Parallel40) : \
+				      (ads->ds_rxstatus3 >> 10) & 0x1)
+
+#define set11nTries(_series, _index)				\
+	(SM((_series)[_index].Tries, AR_XmitDataTries##_index))
+
+#define set11nRate(_series, _index)				\
+	(SM((_series)[_index].Rate, AR_XmitRate##_index))
+
+#define set11nPktDurRTSCTS(_series, _index)				\
+	(SM((_series)[_index].PktDuration, AR_PacketDur##_index) |	\
+	((_series)[_index].RateFlags & ATH9K_RATESERIES_RTS_CTS   ?	\
+		AR_RTSCTSQual##_index : 0))
+
+#define set11nRateFlags(_series, _index)				\
+	(((_series)[_index].RateFlags & ATH9K_RATESERIES_2040 ? \
+		AR_2040_##_index : 0) \
+	|((_series)[_index].RateFlags & ATH9K_RATESERIES_HALFGI ? \
+		AR_GI##_index : 0) \
+	|SM((_series)[_index].ChSel, AR_ChainSel##_index))
+
+#define AR_SREV_9100(ah) ((ah->ah_macVersion) == AR_SREV_VERSION_9100)
+
+#define INIT_CONFIG_STATUS  0x00000000
+#define INIT_RSSI_THR       0x00000700
+#define INIT_BCON_CNTRL_REG 0x00000000
+
+#define MIN_TX_FIFO_THRESHOLD   0x1
+#define MAX_TX_FIFO_THRESHOLD   ((4096 / 64) - 1)
+#define INIT_TX_FIFO_THRESHOLD  MIN_TX_FIFO_THRESHOLD
+
+#define NUM_CORNER_FIX_BITS_2133    7
+#define CCK_OFDM_GAIN_DELTA         15
+
+struct ar5416AniState {
+	struct ath9k_channel c;
+	u8 noiseImmunityLevel;
+	u8 spurImmunityLevel;
+	u8 firstepLevel;
+	u8 ofdmWeakSigDetectOff;
+	u8 cckWeakSigThreshold;
+	u32 listenTime;
+	u32 ofdmTrigHigh;
+	u32 ofdmTrigLow;
+	int32_t cckTrigHigh;
+	int32_t cckTrigLow;
+	int32_t rssiThrLow;
+	int32_t rssiThrHigh;
+	u32 noiseFloor;
+	u32 txFrameCount;
+	u32 rxFrameCount;
+	u32 cycleCount;
+	u32 ofdmPhyErrCount;
+	u32 cckPhyErrCount;
+	u32 ofdmPhyErrBase;
+	u32 cckPhyErrBase;
+	int16_t pktRssi[2];
+	int16_t ofdmErrRssi[2];
+	int16_t cckErrRssi[2];
+};
+
+#define HAL_PROCESS_ANI     0x00000001
+#define HAL_RADAR_EN        0x80000000
+#define HAL_AR_EN           0x40000000
+
+#define DO_ANI(ah) \
+    ((AH5416(ah)->ah_procPhyErr & HAL_PROCESS_ANI))
+
+struct ar5416Stats {
+	u32 ast_ani_niup;
+	u32 ast_ani_nidown;
+	u32 ast_ani_spurup;
+	u32 ast_ani_spurdown;
+	u32 ast_ani_ofdmon;
+	u32 ast_ani_ofdmoff;
+	u32 ast_ani_cckhigh;
+	u32 ast_ani_ccklow;
+	u32 ast_ani_stepup;
+	u32 ast_ani_stepdown;
+	u32 ast_ani_ofdmerrs;
+	u32 ast_ani_cckerrs;
+	u32 ast_ani_reset;
+	u32 ast_ani_lzero;
+	u32 ast_ani_lneg;
+	struct ath9k_mib_stats ast_mibstats;
+	struct ath9k_node_stats ast_nodestats;
+};
+
+#define AR5416_OPFLAGS_11A           0x01
+#define AR5416_OPFLAGS_11G           0x02
+#define AR5416_OPFLAGS_N_5G_HT40     0x04
+#define AR5416_OPFLAGS_N_2G_HT40     0x08
+#define AR5416_OPFLAGS_N_5G_HT20     0x10
+#define AR5416_OPFLAGS_N_2G_HT20     0x20
+
+#define EEP_RFSILENT_ENABLED        0x0001
+#define EEP_RFSILENT_ENABLED_S      0
+#define EEP_RFSILENT_POLARITY       0x0002
+#define EEP_RFSILENT_POLARITY_S     1
+#define EEP_RFSILENT_GPIO_SEL       0x001c
+#define EEP_RFSILENT_GPIO_SEL_S     2
+
+#define AR5416_EEP_NO_BACK_VER       0x1
+#define AR5416_EEP_VER               0xE
+#define AR5416_EEP_VER_MINOR_MASK    0x0FFF
+#define AR5416_EEP_MINOR_VER_2       0x2
+#define AR5416_EEP_MINOR_VER_3       0x3
+#define AR5416_EEP_MINOR_VER_7       0x7
+#define AR5416_EEP_MINOR_VER_9       0x9
+
+#define AR5416_EEP_START_LOC            256
+#define AR5416_NUM_5G_CAL_PIERS         8
+#define AR5416_NUM_2G_CAL_PIERS         4
+#define AR5416_NUM_5G_20_TARGET_POWERS  8
+#define AR5416_NUM_5G_40_TARGET_POWERS  8
+#define AR5416_NUM_2G_CCK_TARGET_POWERS 3
+#define AR5416_NUM_2G_20_TARGET_POWERS  4
+#define AR5416_NUM_2G_40_TARGET_POWERS  4
+#define AR5416_NUM_CTLS                 24
+#define AR5416_NUM_BAND_EDGES           8
+#define AR5416_NUM_PD_GAINS             4
+#define AR5416_PD_GAINS_IN_MASK         4
+#define AR5416_PD_GAIN_ICEPTS           5
+#define AR5416_EEPROM_MODAL_SPURS       5
+#define AR5416_MAX_RATE_POWER           63
+#define AR5416_NUM_PDADC_VALUES         128
+#define AR5416_NUM_RATES                16
+#define AR5416_BCHAN_UNUSED             0xFF
+#define AR5416_MAX_PWR_RANGE_IN_HALF_DB 64
+#define AR5416_EEPMISC_BIG_ENDIAN       0x01
+#define AR5416_MAX_CHAINS               3
+#define AR5416_ANT_16S                  25
+
+#define AR5416_NUM_ANT_CHAIN_FIELDS     7
+#define AR5416_NUM_ANT_COMMON_FIELDS    4
+#define AR5416_SIZE_ANT_CHAIN_FIELD     3
+#define AR5416_SIZE_ANT_COMMON_FIELD    4
+#define AR5416_ANT_CHAIN_MASK           0x7
+#define AR5416_ANT_COMMON_MASK          0xf
+#define AR5416_CHAIN_0_IDX              0
+#define AR5416_CHAIN_1_IDX              1
+#define AR5416_CHAIN_2_IDX              2
+
+#define AR5416_PWR_TABLE_OFFSET         -5
+#define AR5416_LEGACY_CHAINMASK         1
+
+enum eeprom_param {
+	EEP_NFTHRESH_5,
+	EEP_NFTHRESH_2,
+	EEP_MAC_MSW,
+	EEP_MAC_MID,
+	EEP_MAC_LSW,
+	EEP_REG_0,
+	EEP_REG_1,
+	EEP_OP_CAP,
+	EEP_OP_MODE,
+	EEP_RF_SILENT,
+	EEP_OB_5,
+	EEP_DB_5,
+	EEP_OB_2,
+	EEP_DB_2,
+	EEP_MINOR_REV,
+	EEP_TX_MASK,
+	EEP_RX_MASK,
+};
+
+enum ar5416_rates {
+	rate6mb, rate9mb, rate12mb, rate18mb,
+	rate24mb, rate36mb, rate48mb, rate54mb,
+	rate1l, rate2l, rate2s, rate5_5l,
+	rate5_5s, rate11l, rate11s, rateXr,
+	rateHt20_0, rateHt20_1, rateHt20_2, rateHt20_3,
+	rateHt20_4, rateHt20_5, rateHt20_6, rateHt20_7,
+	rateHt40_0, rateHt40_1, rateHt40_2, rateHt40_3,
+	rateHt40_4, rateHt40_5, rateHt40_6, rateHt40_7,
+	rateDupCck, rateDupOfdm, rateExtCck, rateExtOfdm,
+	Ar5416RateSize
+};
+
+struct base_eep_header {
+	u16 length;
+	u16 checksum;
+	u16 version;
+	u8 opCapFlags;
+	u8 eepMisc;
+	u16 regDmn[2];
+	u8 macAddr[6];
+	u8 rxMask;
+	u8 txMask;
+	u16 rfSilent;
+	u16 blueToothOptions;
+	u16 deviceCap;
+	u32 binBuildNumber;
+	u8 deviceType;
+	u8 pwdclkind;
+	u8 futureBase[32];
+} __packed;
+
+struct spur_chan {
+	u16 spurChan;
+	u8 spurRangeLow;
+	u8 spurRangeHigh;
+} __packed;
+
+struct modal_eep_header {
+	u32 antCtrlChain[AR5416_MAX_CHAINS];
+	u32 antCtrlCommon;
+	u8 antennaGainCh[AR5416_MAX_CHAINS];
+	u8 switchSettling;
+	u8 txRxAttenCh[AR5416_MAX_CHAINS];
+	u8 rxTxMarginCh[AR5416_MAX_CHAINS];
+	u8 adcDesiredSize;
+	u8 pgaDesiredSize;
+	u8 xlnaGainCh[AR5416_MAX_CHAINS];
+	u8 txEndToXpaOff;
+	u8 txEndToRxOn;
+	u8 txFrameToXpaOn;
+	u8 thresh62;
+	u8 noiseFloorThreshCh[AR5416_MAX_CHAINS];
+	u8 xpdGain;
+	u8 xpd;
+	u8 iqCalICh[AR5416_MAX_CHAINS];
+	u8 iqCalQCh[AR5416_MAX_CHAINS];
+	u8 pdGainOverlap;
+	u8 ob;
+	u8 db;
+	u8 xpaBiasLvl;
+	u8 pwrDecreaseFor2Chain;
+	u8 pwrDecreaseFor3Chain;
+	u8 txFrameToDataStart;
+	u8 txFrameToPaOn;
+	u8 ht40PowerIncForPdadc;
+	u8 bswAtten[AR5416_MAX_CHAINS];
+	u8 bswMargin[AR5416_MAX_CHAINS];
+	u8 swSettleHt40;
+	u8 xatten2Db[AR5416_MAX_CHAINS];
+	u8 xatten2Margin[AR5416_MAX_CHAINS];
+	u8 ob_ch1;
+	u8 db_ch1;
+	u8 useAnt1:1,
+	    force_xpaon:1,
+	    local_bias:1,
+	    femBandSelectUsed:1, xlnabufin:1, xlnaisel:2, xlnabufmode:1;
+	u8 futureModalar9280;
+	u16 xpaBiasLvlFreq[3];
+	u8 futureModal[6];
+
+	struct spur_chan spurChans[AR5416_EEPROM_MODAL_SPURS];
+} __packed;
+
+struct cal_data_per_freq {
+	u8 pwrPdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
+	u8 vpdPdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
+} __packed;
+
+struct cal_target_power_leg {
+	u8 bChannel;
+	u8 tPow2x[4];
+} __packed;
+
+struct cal_target_power_ht {
+	u8 bChannel;
+	u8 tPow2x[8];
+} __packed;
+
+#ifdef __BIG_ENDIAN_BITFIELD
+struct cal_ctl_edges {
+	u8 bChannel;
+	u8 flag:2, tPower:6;
+} __packed;
+#else
+struct cal_ctl_edges {
+	u8 bChannel;
+	u8 tPower:6, flag:2;
+} __packed;
+#endif
+
+struct cal_ctl_data {
+	struct cal_ctl_edges
+	 ctlEdges[AR5416_MAX_CHAINS][AR5416_NUM_BAND_EDGES];
+} __packed;
+
+struct ar5416_eeprom {
+	struct base_eep_header baseEepHeader;
+	u8 custData[64];
+	struct modal_eep_header modalHeader[2];
+	u8 calFreqPier5G[AR5416_NUM_5G_CAL_PIERS];
+	u8 calFreqPier2G[AR5416_NUM_2G_CAL_PIERS];
+	struct cal_data_per_freq
+	 calPierData5G[AR5416_MAX_CHAINS][AR5416_NUM_5G_CAL_PIERS];
+	struct cal_data_per_freq
+	 calPierData2G[AR5416_MAX_CHAINS][AR5416_NUM_2G_CAL_PIERS];
+	struct cal_target_power_leg
+	 calTargetPower5G[AR5416_NUM_5G_20_TARGET_POWERS];
+	struct cal_target_power_ht
+	 calTargetPower5GHT20[AR5416_NUM_5G_20_TARGET_POWERS];
+	struct cal_target_power_ht
+	 calTargetPower5GHT40[AR5416_NUM_5G_40_TARGET_POWERS];
+	struct cal_target_power_leg
+	 calTargetPowerCck[AR5416_NUM_2G_CCK_TARGET_POWERS];
+	struct cal_target_power_leg
+	 calTargetPower2G[AR5416_NUM_2G_20_TARGET_POWERS];
+	struct cal_target_power_ht
+	 calTargetPower2GHT20[AR5416_NUM_2G_20_TARGET_POWERS];
+	struct cal_target_power_ht
+	 calTargetPower2GHT40[AR5416_NUM_2G_40_TARGET_POWERS];
+	u8 ctlIndex[AR5416_NUM_CTLS];
+	struct cal_ctl_data ctlData[AR5416_NUM_CTLS];
+	u8 padding;
+} __packed;
+
+struct ar5416IniArray {
+	u32 *ia_array;
+	u32 ia_rows;
+	u32 ia_columns;
+};
+
+#define INIT_INI_ARRAY(iniarray, array, rows, columns) do {	\
+		(iniarray)->ia_array = (u32 *)(array);    \
+		(iniarray)->ia_rows = (rows);			\
+		(iniarray)->ia_columns = (columns);		\
+	} while (0)
+
+#define INI_RA(iniarray, row, column) \
+	(((iniarray)->ia_array)[(row) *	((iniarray)->ia_columns) + (column)])
+
+#define INIT_CAL(_perCal) do { \
+		(_perCal)->calState = CAL_WAITING; \
+		(_perCal)->calNext = NULL; \
+	} while (0)
+
+#define INSERT_CAL(_ahp, _perCal)					\
+	do {								\
+		if ((_ahp)->ah_cal_list_last == NULL) {			\
+			(_ahp)->ah_cal_list = \
+				(_ahp)->ah_cal_list_last = (_perCal); \
+			((_ahp)->ah_cal_list_last)->calNext = (_perCal); \
+		} else {						\
+			((_ahp)->ah_cal_list_last)->calNext = (_perCal); \
+			(_ahp)->ah_cal_list_last = (_perCal);		\
+			(_perCal)->calNext = (_ahp)->ah_cal_list;	\
+		}							\
+	} while (0)
+
+enum hal_cal_types {
+	ADC_DC_INIT_CAL = 0x1,
+	ADC_GAIN_CAL = 0x2,
+	ADC_DC_CAL = 0x4,
+	IQ_MISMATCH_CAL = 0x8
+};
+
+enum hal_cal_state {
+	CAL_INACTIVE,
+	CAL_WAITING,
+	CAL_RUNNING,
+	CAL_DONE
+};
+
+#define MIN_CAL_SAMPLES     1
+#define MAX_CAL_SAMPLES    64
+#define INIT_LOG_COUNT      5
+#define PER_MIN_LOG_COUNT   2
+#define PER_MAX_LOG_COUNT  10
+
+struct hal_percal_data {
+	enum hal_cal_types calType;
+	u32 calNumSamples;
+	u32 calCountMax;
+	void (*calCollect) (struct ath_hal *);
+	void (*calPostProc) (struct ath_hal *, u8);
+};
+
+struct hal_cal_list {
+	const struct hal_percal_data *calData;
+	enum hal_cal_state calState;
+	struct hal_cal_list *calNext;
+};
+
+struct ath_hal_5416 {
+	struct ath_hal ah;
+	struct ar5416_eeprom ah_eeprom;
+	u8 ah_macaddr[ETH_ALEN];
+	u8 ah_bssid[ETH_ALEN];
+	u8 ah_bssidmask[ETH_ALEN];
+	u16 ah_assocId;
+	int16_t ah_curchanRadIndex;
+	u32 ah_maskReg;
+	struct ar5416Stats ah_stats;
+	u32 ah_txDescMask;
+	u32 ah_txOkInterruptMask;
+	u32 ah_txErrInterruptMask;
+	u32 ah_txDescInterruptMask;
+	u32 ah_txEolInterruptMask;
+	u32 ah_txUrnInterruptMask;
+	struct ath9k_tx_queue_info ah_txq[ATH9K_NUM_TX_QUEUES];
+	enum ath9k_power_mode ah_powerMode;
+	bool ah_chipFullSleep;
+	u32 ah_atimWindow;
+	enum ath9k_ant_setting ah_diversityControl;
+	u16 ah_antennaSwitchSwap;
+	enum hal_cal_types ah_suppCals;
+	struct hal_cal_list ah_iqCalData;
+	struct hal_cal_list ah_adcGainCalData;
+	struct hal_cal_list ah_adcDcCalInitData;
+	struct hal_cal_list ah_adcDcCalData;
+	struct hal_cal_list *ah_cal_list;
+	struct hal_cal_list *ah_cal_list_last;
+	struct hal_cal_list *ah_cal_list_curr;
+#define ah_totalPowerMeasI ah_Meas0.unsign
+#define ah_totalPowerMeasQ ah_Meas1.unsign
+#define ah_totalIqCorrMeas ah_Meas2.sign
+#define ah_totalAdcIOddPhase  ah_Meas0.unsign
+#define ah_totalAdcIEvenPhase ah_Meas1.unsign
+#define ah_totalAdcQOddPhase  ah_Meas2.unsign
+#define ah_totalAdcQEvenPhase ah_Meas3.unsign
+#define ah_totalAdcDcOffsetIOddPhase  ah_Meas0.sign
+#define ah_totalAdcDcOffsetIEvenPhase ah_Meas1.sign
+#define ah_totalAdcDcOffsetQOddPhase  ah_Meas2.sign
+#define ah_totalAdcDcOffsetQEvenPhase ah_Meas3.sign
+	union {
+		u32 unsign[AR5416_MAX_CHAINS];
+		int32_t sign[AR5416_MAX_CHAINS];
+	} ah_Meas0;
+	union {
+		u32 unsign[AR5416_MAX_CHAINS];
+		int32_t sign[AR5416_MAX_CHAINS];
+	} ah_Meas1;
+	union {
+		u32 unsign[AR5416_MAX_CHAINS];
+		int32_t sign[AR5416_MAX_CHAINS];
+	} ah_Meas2;
+	union {
+		u32 unsign[AR5416_MAX_CHAINS];
+		int32_t sign[AR5416_MAX_CHAINS];
+	} ah_Meas3;
+	u16 ah_CalSamples;
+	u32 ah_tx6PowerInHalfDbm;
+	u32 ah_staId1Defaults;
+	u32 ah_miscMode;
+	bool ah_tpcEnabled;
+	u32 ah_beaconInterval;
+	enum {
+		AUTO_32KHZ,
+		USE_32KHZ,
+		DONT_USE_32KHZ,
+	} ah_enable32kHzClock;
+	u32 *ah_analogBank0Data;
+	u32 *ah_analogBank1Data;
+	u32 *ah_analogBank2Data;
+	u32 *ah_analogBank3Data;
+	u32 *ah_analogBank6Data;
+	u32 *ah_analogBank6TPCData;
+	u32 *ah_analogBank7Data;
+	u32 *ah_addac5416_21;
+	u32 *ah_bank6Temp;
+	u32 ah_ofdmTxPower;
+	int16_t ah_txPowerIndexOffset;
+	u32 ah_slottime;
+	u32 ah_acktimeout;
+	u32 ah_ctstimeout;
+	u32 ah_globaltxtimeout;
+	u8 ah_gBeaconRate;
+	u32 ah_gpioSelect;
+	u32 ah_polarity;
+	u32 ah_gpioBit;
+	bool ah_eepEnabled;
+	u32 ah_procPhyErr;
+	bool ah_hasHwPhyCounters;
+	u32 ah_aniPeriod;
+	struct ar5416AniState *ah_curani;
+	struct ar5416AniState ah_ani[255];
+	int ah_totalSizeDesired[5];
+	int ah_coarseHigh[5];
+	int ah_coarseLow[5];
+	int ah_firpwr[5];
+	u16 ah_ratesArray[16];
+	u32 ah_intrTxqs;
+	bool ah_intrMitigation;
+	u32 ah_cycleCount;
+	u32 ah_ctlBusy;
+	u32 ah_extBusy;
+	enum ath9k_ht_extprotspacing ah_extprotspacing;
+	u8 ah_txchainmask;
+	u8 ah_rxchainmask;
+	int ah_hwp;
+	void __iomem *ah_cal_mem;
+	enum ath9k_ani_cmd ah_ani_function;
+	struct ar5416IniArray ah_iniModes;
+	struct ar5416IniArray ah_iniCommon;
+	struct ar5416IniArray ah_iniBank0;
+	struct ar5416IniArray ah_iniBB_RfGain;
+	struct ar5416IniArray ah_iniBank1;
+	struct ar5416IniArray ah_iniBank2;
+	struct ar5416IniArray ah_iniBank3;
+	struct ar5416IniArray ah_iniBank6;
+	struct ar5416IniArray ah_iniBank6TPC;
+	struct ar5416IniArray ah_iniBank7;
+	struct ar5416IniArray ah_iniAddac;
+	struct ar5416IniArray ah_iniPcieSerdes;
+	struct ar5416IniArray ah_iniModesAdditional;
+};
+#define AH5416(_ah) ((struct ath_hal_5416 *)(_ah))
+
+#define FREQ2FBIN(x, y) ((y) ? ((x) - 2300) : (((x) - 4800) / 5))
+
+#define IS_5416_EMU(ah)					\
+	((ah->ah_devid == AR5416_DEVID_EMU) ||		\
+	 (ah->ah_devid == AR5416_DEVID_EMU_PCIE))
+
+#define ar5416RfDetach(ah) do {					\
+		if (AH5416(ah)->ah_rfHal.rfDetach != NULL)	\
+			AH5416(ah)->ah_rfHal.rfDetach(ah);	\
+	} while (0)
+
+#define ath9k_hw_use_flash(_ah)			\
+	(!(_ah->ah_flags & AH_USE_EEPROM))
+
+
+#define DO_DELAY(x) do {			\
+		if ((++(x) % 64) == 0)          \
+			udelay(1);		\
+	} while (0)
+
+#define REG_WRITE_ARRAY(iniarray, column, regWr) do {                   \
+		int r;							\
+		for (r = 0; r < ((iniarray)->ia_rows); r++) {		\
+			REG_WRITE(ah, INI_RA((iniarray), (r), 0), \
+				INI_RA((iniarray), r, (column))); \
+			DO_DELAY(regWr);				\
+		}							\
+	} while (0)
+
+#define BASE_ACTIVATE_DELAY         100
+#define RTC_PLL_SETTLE_DELAY        1000
+#define COEF_SCALE_S                24
+#define HT40_CHANNEL_CENTER_SHIFT   10
+
+#define ar5416CheckOpMode(_opmode)					\
+	((_opmode == ATH9K_M_STA) || (_opmode == ATH9K_M_IBSS) ||	\
+	 (_opmode == ATH9K_M_HOSTAP) || (_opmode == ATH9K_M_MONITOR))
+
+#define AR5416_EEPROM_MAGIC_OFFSET  0x0
+
+#define AR5416_EEPROM_S             2
+#define AR5416_EEPROM_OFFSET        0x2000
+#define AR5416_EEPROM_START_ADDR			\
+	(AR_SREV_9100(ah)) ? 0x1fff1000 : 0x503f1200
+#define AR5416_EEPROM_MAX           0xae0
+#define ar5416_get_eep_ver(_ahp)				\
+	(((_ahp)->ah_eeprom.baseEepHeader.version >> 12) & 0xF)
+#define ar5416_get_eep_rev(_ahp)				\
+	(((_ahp)->ah_eeprom.baseEepHeader.version) & 0xFFF)
+#define ar5416_get_ntxchains(_txchainmask)				\
+	(((_txchainmask >> 2) & 1) + \
+		((_txchainmask >> 1) & 1) + (_txchainmask & 1))
+
+#define IS_EEP_MINOR_V3(_ahp) \
+	(ath9k_hw_get_eeprom((_ahp), EEP_MINOR_REV)  >= AR5416_EEP_MINOR_VER_3)
+
+#define FIXED_CCA_THRESHOLD 15
+
+#ifdef __BIG_ENDIAN
+#define AR5416_EEPROM_MAGIC 0x5aa5
+#else
+#define AR5416_EEPROM_MAGIC 0xa55a
+#endif
+
+#define ATH9K_POW_SM(_r, _s)     (((_r) & 0x3f) << (_s))
+
+#define ATH9K_ANTENNA0_CHAINMASK        0x1
+#define ATH9K_ANTENNA1_CHAINMASK        0x2
+
+#define ATH9K_NUM_DMA_DEBUG_REGS        8
+#define ATH9K_NUM_QUEUES                10
+
+#define HAL_NOISE_IMMUNE_MAX            4
+#define HAL_SPUR_IMMUNE_MAX             7
+#define HAL_FIRST_STEP_MAX              2
+
+#define ATH9K_ANI_OFDM_TRIG_HIGH          500
+#define ATH9K_ANI_OFDM_TRIG_LOW           200
+#define ATH9K_ANI_CCK_TRIG_HIGH           200
+#define ATH9K_ANI_CCK_TRIG_LOW            100
+#define ATH9K_ANI_NOISE_IMMUNE_LVL        4
+#define ATH9K_ANI_USE_OFDM_WEAK_SIG       true
+#define ATH9K_ANI_CCK_WEAK_SIG_THR        false
+#define ATH9K_ANI_SPUR_IMMUNE_LVL         7
+#define ATH9K_ANI_FIRSTEP_LVL             0
+#define ATH9K_ANI_RSSI_THR_HIGH           40
+#define ATH9K_ANI_RSSI_THR_LOW            7
+#define ATH9K_ANI_PERIOD                  100
+
+#define AR_GPIOD_MASK                   0x00001FFF
+#define AR_GPIO_BIT(_gpio)              (1 << (_gpio))
+
+#define MAX_ANALOG_START                319
+
+#define HAL_EP_RND(x, mul) \
+	((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
+#define BEACON_RSSI(ahp) \
+	HAL_EP_RND(ahp->ah_stats.ast_nodestats.ns_avgbrssi, \
+		ATH9K_RSSI_EP_MULTIPLIER)
+
+#define ah_mibStats     ah_stats.ast_mibstats
+
+#define AH_TIMEOUT         100000
+#define AH_TIME_QUANTUM        10
+
+#define IS(_c, _f)       (((_c)->channelFlags & _f) || 0)
+
+#define AR_KEYTABLE_SIZE 128
+#define POWER_UP_TIME    200000
+
+#define EXT_ADDITIVE (0x8000)
+#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE)
+#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE)
+#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE)
+
+#define SUB_NUM_CTL_MODES_AT_5G_40 2
+#define SUB_NUM_CTL_MODES_AT_2G_40 3
+#define SPUR_RSSI_THRESH 40
+
+#define TU_TO_USEC(_tu)         ((_tu) << 10)
+
+#define CAB_TIMEOUT_VAL         10
+#define BEACON_TIMEOUT_VAL      10
+#define MIN_BEACON_TIMEOUT_VAL   1
+#define SLEEP_SLOP               3
+
+#define CCK_SIFS_TIME        10
+#define CCK_PREAMBLE_BITS   144
+#define CCK_PLCP_BITS        48
+
+#define OFDM_SIFS_TIME        16
+#define OFDM_PREAMBLE_TIME    20
+#define OFDM_PLCP_BITS        22
+#define OFDM_SYMBOL_TIME      4
+
+#define OFDM_SIFS_TIME_HALF     32
+#define OFDM_PREAMBLE_TIME_HALF 40
+#define OFDM_PLCP_BITS_HALF     22
+#define OFDM_SYMBOL_TIME_HALF   8
+
+#define OFDM_SIFS_TIME_QUARTER      64
+#define OFDM_PREAMBLE_TIME_QUARTER  80
+#define OFDM_PLCP_BITS_QUARTER      22
+#define OFDM_SYMBOL_TIME_QUARTER    16
+
+u32 ath9k_hw_get_eeprom(struct ath_hal_5416 *ahp,
+			      enum eeprom_param param);
+
+#endif
diff --git a/drivers/net/wireless/ath9k/initvals.h b/drivers/net/wireless/ath9k/initvals.h
new file mode 100644
index 00000000000..3dd3815940a
--- /dev/null
+++ b/drivers/net/wireless/ath9k/initvals.h
@@ -0,0 +1,3146 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+static const u32 ar5416Modes_9100[][6] = {
+    { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+    { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+    { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+    { 0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000, 0x00014008 },
+    { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
+    { 0x0000801c, 0x128d93a7, 0x128d93cf, 0x12e013d7, 0x12e013ab, 0x098813cf },
+    { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+    { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+    { 0x00009844, 0x1372161e, 0x1372161e, 0x137216a0, 0x137216a0, 0x137216a0 },
+    { 0x00009848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000a848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000b848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x00009850, 0x6de8b4e0, 0x6de8b4e0, 0x6de8b0de, 0x6de8b0de, 0x6de8b0de },
+    { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e },
+    { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e },
+    { 0x00009860, 0x00049d18, 0x00049d18, 0x00049d18, 0x00049d18, 0x00049d18 },
+    { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009868, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 },
+    { 0x0000986c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 },
+    { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 },
+    { 0x00009918, 0x000001b8, 0x00000370, 0x00000268, 0x00000134, 0x00000134 },
+    { 0x00009924, 0xd0058a0b, 0xd0058a0b, 0xd0058a0b, 0xd0058a0b, 0xd0058a0b },
+    { 0x00009944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020 },
+    { 0x00009960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 },
+    { 0x0000a960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 },
+    { 0x0000b960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 },
+    { 0x00009964, 0x00000000, 0x00000000, 0x00001120, 0x00001120, 0x00001120 },
+    { 0x0000c9bc, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00 },
+    { 0x000099c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, 0x038919be },
+    { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+    { 0x000099c8, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c },
+    { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+    { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+    { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a204, 0x00000880, 0x00000880, 0x00000880, 0x00000880, 0x00000880 },
+    { 0x0000a208, 0xd6be4788, 0xd6be4788, 0xd03e4788, 0xd03e4788, 0xd03e4788 },
+    { 0x0000a20c, 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000b20c, 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000c20c, 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
+    { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a274, 0x0a1a9caa, 0x0a1a9caa, 0x0a1a7caa, 0x0a1a7caa, 0x0a1a7caa },
+    { 0x0000a300, 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 },
+    { 0x0000a304, 0x30032602, 0x30032602, 0x2e032402, 0x2e032402, 0x2e032402 },
+    { 0x0000a308, 0x48073e06, 0x48073e06, 0x4a0a3c06, 0x4a0a3c06, 0x4a0a3c06 },
+    { 0x0000a30c, 0x560b4c0a, 0x560b4c0a, 0x621a540b, 0x621a540b, 0x621a540b },
+    { 0x0000a310, 0x641a600f, 0x641a600f, 0x764f6c1b, 0x764f6c1b, 0x764f6c1b },
+    { 0x0000a314, 0x7a4f6e1b, 0x7a4f6e1b, 0x845b7a5a, 0x845b7a5a, 0x845b7a5a },
+    { 0x0000a318, 0x8c5b7e5a, 0x8c5b7e5a, 0x950f8ccf, 0x950f8ccf, 0x950f8ccf },
+    { 0x0000a31c, 0x9d0f96cf, 0x9d0f96cf, 0xa5cf9b4f, 0xa5cf9b4f, 0xa5cf9b4f },
+    { 0x0000a320, 0xb51fa69f, 0xb51fa69f, 0xbddfaf1f, 0xbddfaf1f, 0xbddfaf1f },
+    { 0x0000a324, 0xcb3fbd07, 0xcb3fbcbf, 0xd1ffc93f, 0xd1ffc93f, 0xd1ffc93f },
+    { 0x0000a328, 0x0000d7bf, 0x0000d7bf, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a32c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a330, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+};
+
+static const u32 ar5416Common_9100[][2] = {
+    { 0x0000000c, 0x00000000 },
+    { 0x00000030, 0x00020015 },
+    { 0x00000034, 0x00000005 },
+    { 0x00000040, 0x00000000 },
+    { 0x00000044, 0x00000008 },
+    { 0x00000048, 0x00000008 },
+    { 0x0000004c, 0x00000010 },
+    { 0x00000050, 0x00000000 },
+    { 0x00000054, 0x0000001f },
+    { 0x00000800, 0x00000000 },
+    { 0x00000804, 0x00000000 },
+    { 0x00000808, 0x00000000 },
+    { 0x0000080c, 0x00000000 },
+    { 0x00000810, 0x00000000 },
+    { 0x00000814, 0x00000000 },
+    { 0x00000818, 0x00000000 },
+    { 0x0000081c, 0x00000000 },
+    { 0x00000820, 0x00000000 },
+    { 0x00000824, 0x00000000 },
+    { 0x00001040, 0x002ffc0f },
+    { 0x00001044, 0x002ffc0f },
+    { 0x00001048, 0x002ffc0f },
+    { 0x0000104c, 0x002ffc0f },
+    { 0x00001050, 0x002ffc0f },
+    { 0x00001054, 0x002ffc0f },
+    { 0x00001058, 0x002ffc0f },
+    { 0x0000105c, 0x002ffc0f },
+    { 0x00001060, 0x002ffc0f },
+    { 0x00001064, 0x002ffc0f },
+    { 0x00001230, 0x00000000 },
+    { 0x00001270, 0x00000000 },
+    { 0x00001038, 0x00000000 },
+    { 0x00001078, 0x00000000 },
+    { 0x000010b8, 0x00000000 },
+    { 0x000010f8, 0x00000000 },
+    { 0x00001138, 0x00000000 },
+    { 0x00001178, 0x00000000 },
+    { 0x000011b8, 0x00000000 },
+    { 0x000011f8, 0x00000000 },
+    { 0x00001238, 0x00000000 },
+    { 0x00001278, 0x00000000 },
+    { 0x000012b8, 0x00000000 },
+    { 0x000012f8, 0x00000000 },
+    { 0x00001338, 0x00000000 },
+    { 0x00001378, 0x00000000 },
+    { 0x000013b8, 0x00000000 },
+    { 0x000013f8, 0x00000000 },
+    { 0x00001438, 0x00000000 },
+    { 0x00001478, 0x00000000 },
+    { 0x000014b8, 0x00000000 },
+    { 0x000014f8, 0x00000000 },
+    { 0x00001538, 0x00000000 },
+    { 0x00001578, 0x00000000 },
+    { 0x000015b8, 0x00000000 },
+    { 0x000015f8, 0x00000000 },
+    { 0x00001638, 0x00000000 },
+    { 0x00001678, 0x00000000 },
+    { 0x000016b8, 0x00000000 },
+    { 0x000016f8, 0x00000000 },
+    { 0x00001738, 0x00000000 },
+    { 0x00001778, 0x00000000 },
+    { 0x000017b8, 0x00000000 },
+    { 0x000017f8, 0x00000000 },
+    { 0x0000103c, 0x00000000 },
+    { 0x0000107c, 0x00000000 },
+    { 0x000010bc, 0x00000000 },
+    { 0x000010fc, 0x00000000 },
+    { 0x0000113c, 0x00000000 },
+    { 0x0000117c, 0x00000000 },
+    { 0x000011bc, 0x00000000 },
+    { 0x000011fc, 0x00000000 },
+    { 0x0000123c, 0x00000000 },
+    { 0x0000127c, 0x00000000 },
+    { 0x000012bc, 0x00000000 },
+    { 0x000012fc, 0x00000000 },
+    { 0x0000133c, 0x00000000 },
+    { 0x0000137c, 0x00000000 },
+    { 0x000013bc, 0x00000000 },
+    { 0x000013fc, 0x00000000 },
+    { 0x0000143c, 0x00000000 },
+    { 0x0000147c, 0x00000000 },
+    { 0x00004030, 0x00000002 },
+    { 0x0000403c, 0x00000002 },
+    { 0x00007010, 0x00000000 },
+    { 0x00007038, 0x000004c2 },
+    { 0x00008004, 0x00000000 },
+    { 0x00008008, 0x00000000 },
+    { 0x0000800c, 0x00000000 },
+    { 0x00008018, 0x00000700 },
+    { 0x00008020, 0x00000000 },
+    { 0x00008038, 0x00000000 },
+    { 0x0000803c, 0x00000000 },
+    { 0x00008048, 0x40000000 },
+    { 0x00008054, 0x00000000 },
+    { 0x00008058, 0x00000000 },
+    { 0x0000805c, 0x000fc78f },
+    { 0x00008060, 0x0000000f },
+    { 0x00008064, 0x00000000 },
+    { 0x000080c0, 0x2a82301a },
+    { 0x000080c4, 0x05dc01e0 },
+    { 0x000080c8, 0x1f402710 },
+    { 0x000080cc, 0x01f40000 },
+    { 0x000080d0, 0x00001e00 },
+    { 0x000080d4, 0x00000000 },
+    { 0x000080d8, 0x00400000 },
+    { 0x000080e0, 0xffffffff },
+    { 0x000080e4, 0x0000ffff },
+    { 0x000080e8, 0x003f3f3f },
+    { 0x000080ec, 0x00000000 },
+    { 0x000080f0, 0x00000000 },
+    { 0x000080f4, 0x00000000 },
+    { 0x000080f8, 0x00000000 },
+    { 0x000080fc, 0x00020000 },
+    { 0x00008100, 0x00020000 },
+    { 0x00008104, 0x00000001 },
+    { 0x00008108, 0x00000052 },
+    { 0x0000810c, 0x00000000 },
+    { 0x00008110, 0x00000168 },
+    { 0x00008118, 0x000100aa },
+    { 0x0000811c, 0x00003210 },
+    { 0x00008120, 0x08f04800 },
+    { 0x00008124, 0x00000000 },
+    { 0x00008128, 0x00000000 },
+    { 0x0000812c, 0x00000000 },
+    { 0x00008130, 0x00000000 },
+    { 0x00008134, 0x00000000 },
+    { 0x00008138, 0x00000000 },
+    { 0x0000813c, 0x00000000 },
+    { 0x00008144, 0x00000000 },
+    { 0x00008168, 0x00000000 },
+    { 0x0000816c, 0x00000000 },
+    { 0x00008170, 0x32143320 },
+    { 0x00008174, 0xfaa4fa50 },
+    { 0x00008178, 0x00000100 },
+    { 0x0000817c, 0x00000000 },
+    { 0x000081c4, 0x00000000 },
+    { 0x000081d0, 0x00003210 },
+    { 0x000081ec, 0x00000000 },
+    { 0x000081f0, 0x00000000 },
+    { 0x000081f4, 0x00000000 },
+    { 0x000081f8, 0x00000000 },
+    { 0x000081fc, 0x00000000 },
+    { 0x00008200, 0x00000000 },
+    { 0x00008204, 0x00000000 },
+    { 0x00008208, 0x00000000 },
+    { 0x0000820c, 0x00000000 },
+    { 0x00008210, 0x00000000 },
+    { 0x00008214, 0x00000000 },
+    { 0x00008218, 0x00000000 },
+    { 0x0000821c, 0x00000000 },
+    { 0x00008220, 0x00000000 },
+    { 0x00008224, 0x00000000 },
+    { 0x00008228, 0x00000000 },
+    { 0x0000822c, 0x00000000 },
+    { 0x00008230, 0x00000000 },
+    { 0x00008234, 0x00000000 },
+    { 0x00008238, 0x00000000 },
+    { 0x0000823c, 0x00000000 },
+    { 0x00008240, 0x00100000 },
+    { 0x00008244, 0x0010f400 },
+    { 0x00008248, 0x00000100 },
+    { 0x0000824c, 0x0001e800 },
+    { 0x00008250, 0x00000000 },
+    { 0x00008254, 0x00000000 },
+    { 0x00008258, 0x00000000 },
+    { 0x0000825c, 0x400000ff },
+    { 0x00008260, 0x00080922 },
+    { 0x00008270, 0x00000000 },
+    { 0x00008274, 0x40000000 },
+    { 0x00008278, 0x003e4180 },
+    { 0x0000827c, 0x00000000 },
+    { 0x00008284, 0x0000002c },
+    { 0x00008288, 0x0000002c },
+    { 0x0000828c, 0x00000000 },
+    { 0x00008294, 0x00000000 },
+    { 0x00008298, 0x00000000 },
+    { 0x00008300, 0x00000000 },
+    { 0x00008304, 0x00000000 },
+    { 0x00008308, 0x00000000 },
+    { 0x0000830c, 0x00000000 },
+    { 0x00008310, 0x00000000 },
+    { 0x00008314, 0x00000000 },
+    { 0x00008318, 0x00000000 },
+    { 0x00008328, 0x00000000 },
+    { 0x0000832c, 0x00000007 },
+    { 0x00008330, 0x00000302 },
+    { 0x00008334, 0x00000e00 },
+    { 0x00008338, 0x00000000 },
+    { 0x0000833c, 0x00000000 },
+    { 0x00008340, 0x000107ff },
+    { 0x00009808, 0x00000000 },
+    { 0x0000980c, 0xad848e19 },
+    { 0x00009810, 0x7d14e000 },
+    { 0x00009814, 0x9c0a9f6b },
+    { 0x0000981c, 0x00000000 },
+    { 0x0000982c, 0x0000a000 },
+    { 0x00009830, 0x00000000 },
+    { 0x0000983c, 0x00200400 },
+    { 0x00009840, 0x206a002e },
+    { 0x0000984c, 0x1284233c },
+    { 0x00009854, 0x00000859 },
+    { 0x00009900, 0x00000000 },
+    { 0x00009904, 0x00000000 },
+    { 0x00009908, 0x00000000 },
+    { 0x0000990c, 0x00000000 },
+    { 0x0000991c, 0x10000fff },
+    { 0x00009920, 0x05100000 },
+    { 0x0000a920, 0x05100000 },
+    { 0x0000b920, 0x05100000 },
+    { 0x00009928, 0x00000001 },
+    { 0x0000992c, 0x00000004 },
+    { 0x00009934, 0x1e1f2022 },
+    { 0x00009938, 0x0a0b0c0d },
+    { 0x0000993c, 0x00000000 },
+    { 0x00009948, 0x9280b212 },
+    { 0x0000994c, 0x00020028 },
+    { 0x00009954, 0x5d50e188 },
+    { 0x00009958, 0x00081fff },
+    { 0x0000c95c, 0x004b6a8e },
+    { 0x0000c968, 0x000003ce },
+    { 0x00009970, 0x190fb515 },
+    { 0x00009974, 0x00000000 },
+    { 0x00009978, 0x00000001 },
+    { 0x0000997c, 0x00000000 },
+    { 0x00009980, 0x00000000 },
+    { 0x00009984, 0x00000000 },
+    { 0x00009988, 0x00000000 },
+    { 0x0000998c, 0x00000000 },
+    { 0x00009990, 0x00000000 },
+    { 0x00009994, 0x00000000 },
+    { 0x00009998, 0x00000000 },
+    { 0x0000999c, 0x00000000 },
+    { 0x000099a0, 0x00000000 },
+    { 0x000099a4, 0x00000001 },
+    { 0x000099a8, 0x001fff00 },
+    { 0x000099ac, 0x00000000 },
+    { 0x000099b0, 0x03051000 },
+    { 0x000099dc, 0x00000000 },
+    { 0x000099e0, 0x00000200 },
+    { 0x000099e4, 0xaaaaaaaa },
+    { 0x000099e8, 0x3c466478 },
+    { 0x000099ec, 0x000000aa },
+    { 0x000099fc, 0x00001042 },
+    { 0x00009b00, 0x00000000 },
+    { 0x00009b04, 0x00000001 },
+    { 0x00009b08, 0x00000002 },
+    { 0x00009b0c, 0x00000003 },
+    { 0x00009b10, 0x00000004 },
+    { 0x00009b14, 0x00000005 },
+    { 0x00009b18, 0x00000008 },
+    { 0x00009b1c, 0x00000009 },
+    { 0x00009b20, 0x0000000a },
+    { 0x00009b24, 0x0000000b },
+    { 0x00009b28, 0x0000000c },
+    { 0x00009b2c, 0x0000000d },
+    { 0x00009b30, 0x00000010 },
+    { 0x00009b34, 0x00000011 },
+    { 0x00009b38, 0x00000012 },
+    { 0x00009b3c, 0x00000013 },
+    { 0x00009b40, 0x00000014 },
+    { 0x00009b44, 0x00000015 },
+    { 0x00009b48, 0x00000018 },
+    { 0x00009b4c, 0x00000019 },
+    { 0x00009b50, 0x0000001a },
+    { 0x00009b54, 0x0000001b },
+    { 0x00009b58, 0x0000001c },
+    { 0x00009b5c, 0x0000001d },
+    { 0x00009b60, 0x00000020 },
+    { 0x00009b64, 0x00000021 },
+    { 0x00009b68, 0x00000022 },
+    { 0x00009b6c, 0x00000023 },
+    { 0x00009b70, 0x00000024 },
+    { 0x00009b74, 0x00000025 },
+    { 0x00009b78, 0x00000028 },
+    { 0x00009b7c, 0x00000029 },
+    { 0x00009b80, 0x0000002a },
+    { 0x00009b84, 0x0000002b },
+    { 0x00009b88, 0x0000002c },
+    { 0x00009b8c, 0x0000002d },
+    { 0x00009b90, 0x00000030 },
+    { 0x00009b94, 0x00000031 },
+    { 0x00009b98, 0x00000032 },
+    { 0x00009b9c, 0x00000033 },
+    { 0x00009ba0, 0x00000034 },
+    { 0x00009ba4, 0x00000035 },
+    { 0x00009ba8, 0x00000035 },
+    { 0x00009bac, 0x00000035 },
+    { 0x00009bb0, 0x00000035 },
+    { 0x00009bb4, 0x00000035 },
+    { 0x00009bb8, 0x00000035 },
+    { 0x00009bbc, 0x00000035 },
+    { 0x00009bc0, 0x00000035 },
+    { 0x00009bc4, 0x00000035 },
+    { 0x00009bc8, 0x00000035 },
+    { 0x00009bcc, 0x00000035 },
+    { 0x00009bd0, 0x00000035 },
+    { 0x00009bd4, 0x00000035 },
+    { 0x00009bd8, 0x00000035 },
+    { 0x00009bdc, 0x00000035 },
+    { 0x00009be0, 0x00000035 },
+    { 0x00009be4, 0x00000035 },
+    { 0x00009be8, 0x00000035 },
+    { 0x00009bec, 0x00000035 },
+    { 0x00009bf0, 0x00000035 },
+    { 0x00009bf4, 0x00000035 },
+    { 0x00009bf8, 0x00000010 },
+    { 0x00009bfc, 0x0000001a },
+    { 0x0000a210, 0x40806333 },
+    { 0x0000a214, 0x00106c10 },
+    { 0x0000a218, 0x009c4060 },
+    { 0x0000a220, 0x018830c6 },
+    { 0x0000a224, 0x00000400 },
+    { 0x0000a228, 0x00000bb5 },
+    { 0x0000a22c, 0x00000011 },
+    { 0x0000a234, 0x20202020 },
+    { 0x0000a238, 0x20202020 },
+    { 0x0000a23c, 0x13c889af },
+    { 0x0000a240, 0x38490a20 },
+    { 0x0000a244, 0x00007bb6 },
+    { 0x0000a248, 0x0fff3ffc },
+    { 0x0000a24c, 0x00000001 },
+    { 0x0000a250, 0x0000a000 },
+    { 0x0000a254, 0x00000000 },
+    { 0x0000a258, 0x0cc75380 },
+    { 0x0000a25c, 0x0f0f0f01 },
+    { 0x0000a260, 0xdfa91f01 },
+    { 0x0000a268, 0x00000000 },
+    { 0x0000a26c, 0x0ebae9c6 },
+    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000c26c, 0x0ebae9c6 },
+    { 0x0000d270, 0x00820820 },
+    { 0x0000a278, 0x1ce739ce },
+    { 0x0000a27c, 0x051701ce },
+    { 0x0000a338, 0x00000000 },
+    { 0x0000a33c, 0x00000000 },
+    { 0x0000a340, 0x00000000 },
+    { 0x0000a344, 0x00000000 },
+    { 0x0000a348, 0x3fffffff },
+    { 0x0000a34c, 0x3fffffff },
+    { 0x0000a350, 0x3fffffff },
+    { 0x0000a354, 0x0003ffff },
+    { 0x0000a358, 0x79a8aa1f },
+    { 0x0000d35c, 0x07ffffef },
+    { 0x0000d360, 0x0fffffe7 },
+    { 0x0000d364, 0x17ffffe5 },
+    { 0x0000d368, 0x1fffffe4 },
+    { 0x0000d36c, 0x37ffffe3 },
+    { 0x0000d370, 0x3fffffe3 },
+    { 0x0000d374, 0x57ffffe3 },
+    { 0x0000d378, 0x5fffffe2 },
+    { 0x0000d37c, 0x7fffffe2 },
+    { 0x0000d380, 0x7f3c7bba },
+    { 0x0000d384, 0xf3307ff0 },
+    { 0x0000a388, 0x08000000 },
+    { 0x0000a38c, 0x20202020 },
+    { 0x0000a390, 0x20202020 },
+    { 0x0000a394, 0x1ce739ce },
+    { 0x0000a398, 0x000001ce },
+    { 0x0000a39c, 0x00000001 },
+    { 0x0000a3a0, 0x00000000 },
+    { 0x0000a3a4, 0x00000000 },
+    { 0x0000a3a8, 0x00000000 },
+    { 0x0000a3ac, 0x00000000 },
+    { 0x0000a3b0, 0x00000000 },
+    { 0x0000a3b4, 0x00000000 },
+    { 0x0000a3b8, 0x00000000 },
+    { 0x0000a3bc, 0x00000000 },
+    { 0x0000a3c0, 0x00000000 },
+    { 0x0000a3c4, 0x00000000 },
+    { 0x0000a3c8, 0x00000246 },
+    { 0x0000a3cc, 0x20202020 },
+    { 0x0000a3d0, 0x20202020 },
+    { 0x0000a3d4, 0x20202020 },
+    { 0x0000a3dc, 0x1ce739ce },
+    { 0x0000a3e0, 0x000001ce },
+};
+
+static const u32 ar5416Bank0_9100[][2] = {
+    { 0x000098b0, 0x1e5795e5 },
+    { 0x000098e0, 0x02008020 },
+};
+
+static const u32 ar5416BB_RfGain_9100[][3] = {
+    { 0x00009a00, 0x00000000, 0x00000000 },
+    { 0x00009a04, 0x00000040, 0x00000040 },
+    { 0x00009a08, 0x00000080, 0x00000080 },
+    { 0x00009a0c, 0x000001a1, 0x00000141 },
+    { 0x00009a10, 0x000001e1, 0x00000181 },
+    { 0x00009a14, 0x00000021, 0x000001c1 },
+    { 0x00009a18, 0x00000061, 0x00000001 },
+    { 0x00009a1c, 0x00000168, 0x00000041 },
+    { 0x00009a20, 0x000001a8, 0x000001a8 },
+    { 0x00009a24, 0x000001e8, 0x000001e8 },
+    { 0x00009a28, 0x00000028, 0x00000028 },
+    { 0x00009a2c, 0x00000068, 0x00000068 },
+    { 0x00009a30, 0x00000189, 0x000000a8 },
+    { 0x00009a34, 0x000001c9, 0x00000169 },
+    { 0x00009a38, 0x00000009, 0x000001a9 },
+    { 0x00009a3c, 0x00000049, 0x000001e9 },
+    { 0x00009a40, 0x00000089, 0x00000029 },
+    { 0x00009a44, 0x00000170, 0x00000069 },
+    { 0x00009a48, 0x000001b0, 0x00000190 },
+    { 0x00009a4c, 0x000001f0, 0x000001d0 },
+    { 0x00009a50, 0x00000030, 0x00000010 },
+    { 0x00009a54, 0x00000070, 0x00000050 },
+    { 0x00009a58, 0x00000191, 0x00000090 },
+    { 0x00009a5c, 0x000001d1, 0x00000151 },
+    { 0x00009a60, 0x00000011, 0x00000191 },
+    { 0x00009a64, 0x00000051, 0x000001d1 },
+    { 0x00009a68, 0x00000091, 0x00000011 },
+    { 0x00009a6c, 0x000001b8, 0x00000051 },
+    { 0x00009a70, 0x000001f8, 0x00000198 },
+    { 0x00009a74, 0x00000038, 0x000001d8 },
+    { 0x00009a78, 0x00000078, 0x00000018 },
+    { 0x00009a7c, 0x00000199, 0x00000058 },
+    { 0x00009a80, 0x000001d9, 0x00000098 },
+    { 0x00009a84, 0x00000019, 0x00000159 },
+    { 0x00009a88, 0x00000059, 0x00000199 },
+    { 0x00009a8c, 0x00000099, 0x000001d9 },
+    { 0x00009a90, 0x000000d9, 0x00000019 },
+    { 0x00009a94, 0x000000f9, 0x00000059 },
+    { 0x00009a98, 0x000000f9, 0x00000099 },
+    { 0x00009a9c, 0x000000f9, 0x000000d9 },
+    { 0x00009aa0, 0x000000f9, 0x000000f9 },
+    { 0x00009aa4, 0x000000f9, 0x000000f9 },
+    { 0x00009aa8, 0x000000f9, 0x000000f9 },
+    { 0x00009aac, 0x000000f9, 0x000000f9 },
+    { 0x00009ab0, 0x000000f9, 0x000000f9 },
+    { 0x00009ab4, 0x000000f9, 0x000000f9 },
+    { 0x00009ab8, 0x000000f9, 0x000000f9 },
+    { 0x00009abc, 0x000000f9, 0x000000f9 },
+    { 0x00009ac0, 0x000000f9, 0x000000f9 },
+    { 0x00009ac4, 0x000000f9, 0x000000f9 },
+    { 0x00009ac8, 0x000000f9, 0x000000f9 },
+    { 0x00009acc, 0x000000f9, 0x000000f9 },
+    { 0x00009ad0, 0x000000f9, 0x000000f9 },
+    { 0x00009ad4, 0x000000f9, 0x000000f9 },
+    { 0x00009ad8, 0x000000f9, 0x000000f9 },
+    { 0x00009adc, 0x000000f9, 0x000000f9 },
+    { 0x00009ae0, 0x000000f9, 0x000000f9 },
+    { 0x00009ae4, 0x000000f9, 0x000000f9 },
+    { 0x00009ae8, 0x000000f9, 0x000000f9 },
+    { 0x00009aec, 0x000000f9, 0x000000f9 },
+    { 0x00009af0, 0x000000f9, 0x000000f9 },
+    { 0x00009af4, 0x000000f9, 0x000000f9 },
+    { 0x00009af8, 0x000000f9, 0x000000f9 },
+    { 0x00009afc, 0x000000f9, 0x000000f9 },
+};
+
+static const u32 ar5416Bank1_9100[][2] = {
+    { 0x000098b0, 0x02108421 },
+    { 0x000098ec, 0x00000008 },
+};
+
+static const u32 ar5416Bank2_9100[][2] = {
+    { 0x000098b0, 0x0e73ff17 },
+    { 0x000098e0, 0x00000420 },
+};
+
+static const u32 ar5416Bank3_9100[][3] = {
+    { 0x000098f0, 0x01400018, 0x01c00018 },
+};
+
+static const u32 ar5416Bank6_9100[][3] = {
+
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x40ff0000, 0x40ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x004210a2, 0x004210a2 },
+    { 0x0000989c, 0x0014008f, 0x0014008f },
+    { 0x0000989c, 0x00c40003, 0x00c40003 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x0001805e, 0x0001805e },
+    { 0x0000989c, 0x0000c0ab, 0x0000c0ab },
+    { 0x0000989c, 0x000000f1, 0x000000f1 },
+    { 0x0000989c, 0x00002081, 0x00002081 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+static const u32 ar5416Bank6TPC_9100[][3] = {
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x40ff0000, 0x40ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x00423022, 0x00423022 },
+    { 0x0000989c, 0x201400df, 0x201400df },
+    { 0x0000989c, 0x00c40002, 0x00c40002 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x0001805e, 0x0001805e },
+    { 0x0000989c, 0x0000c0ab, 0x0000c0ab },
+    { 0x0000989c, 0x000000e1, 0x000000e1 },
+    { 0x0000989c, 0x00007081, 0x00007081 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+static const u32 ar5416Bank7_9100[][2] = {
+    { 0x0000989c, 0x00000500 },
+    { 0x0000989c, 0x00000800 },
+    { 0x000098cc, 0x0000000e },
+};
+
+static const u32 ar5416Addac_9100[][2] = {
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000003 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x0000000c },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000030 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000060 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000058 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x000098c4,  0x00000000 },
+};
+
+static const u32 ar5416Modes[][6] = {
+    { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+    { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+    { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+    { 0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000, 0x00014008 },
+    { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
+    { 0x0000801c, 0x128d93a7, 0x128d93cf, 0x12e013d7, 0x12e013ab, 0x098813cf },
+    { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+    { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+    { 0x00009844, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0, 0x037216a0 },
+    { 0x00009848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000a848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000b848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x00009850, 0x6d48b4e2, 0x6d48b4e2, 0x6d48b0e2, 0x6d48b0e2, 0x6d48b0e2 },
+    { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec86d2e, 0x7ec84d2e, 0x7ec82d2e },
+    { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e },
+    { 0x00009860, 0x00048d18, 0x00048d18, 0x00048d20, 0x00048d20, 0x00048d18 },
+    { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009868, 0x409a40d0, 0x409a40d0, 0x409a40d0, 0x409a40d0, 0x409a40d0 },
+    { 0x0000986c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 },
+    { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 },
+    { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+    { 0x00009924, 0xd00a8a07, 0xd00a8a07, 0xd00a8a11, 0xd00a8a0d, 0xd00a8a0d },
+    { 0x00009940, 0x00754604, 0x00754604, 0xfff81204, 0xfff81204, 0xfff81204 },
+    { 0x00009944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020 },
+    { 0x00009954, 0x5f3ca3de, 0x5f3ca3de, 0xe250a51e, 0xe250a51e, 0xe250a51e },
+    { 0x00009958, 0x2108ecff, 0x2108ecff, 0x3388ffff, 0x3388ffff, 0x3388ffff },
+#ifdef TB243
+    { 0x00009960, 0x00000900, 0x00000900, 0x00009b40, 0x00009b40, 0x00012d80 },
+    { 0x0000a960, 0x00000900, 0x00000900, 0x00009b40, 0x00009b40, 0x00012d80 },
+    { 0x0000b960, 0x00000900, 0x00000900, 0x00009b40, 0x00009b40, 0x00012d80 },
+    { 0x00009964, 0x00000000, 0x00000000, 0x00002210, 0x00002210, 0x00001120 },
+#else
+    { 0x00009960, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0 },
+    { 0x0000a960, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0 },
+    { 0x0000b960, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0, 0x0001bfc0 },
+    { 0x00009964, 0x00001120, 0x00001120, 0x00001120, 0x00001120, 0x00001120 },
+#endif
+    { 0x0000c9bc, 0x001a0600, 0x001a0600, 0x001a1000, 0x001a0c00, 0x001a0c00 },
+    { 0x000099c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, 0x038919be },
+    { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+    { 0x000099c8, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329 },
+    { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+    { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+    { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a204, 0x00000880, 0x00000880, 0x00000880, 0x00000880, 0x00000880 },
+    { 0x0000a208, 0xd6be4788, 0xd6be4788, 0xd03e4788, 0xd03e4788, 0xd03e4788 },
+    { 0x0000a20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000b20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000c20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
+    { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a274, 0x0a1a9caa, 0x0a1a9caa, 0x0a1a7caa, 0x0a1a7caa, 0x0a1a7caa },
+    { 0x0000a300, 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 },
+    { 0x0000a304, 0x30032602, 0x30032602, 0x2e032402, 0x2e032402, 0x2e032402 },
+    { 0x0000a308, 0x48073e06, 0x48073e06, 0x4a0a3c06, 0x4a0a3c06, 0x4a0a3c06 },
+    { 0x0000a30c, 0x560b4c0a, 0x560b4c0a, 0x621a540b, 0x621a540b, 0x621a540b },
+    { 0x0000a310, 0x641a600f, 0x641a600f, 0x764f6c1b, 0x764f6c1b, 0x764f6c1b },
+    { 0x0000a314, 0x7a4f6e1b, 0x7a4f6e1b, 0x845b7a5a, 0x845b7a5a, 0x845b7a5a },
+    { 0x0000a318, 0x8c5b7e5a, 0x8c5b7e5a, 0x950f8ccf, 0x950f8ccf, 0x950f8ccf },
+    { 0x0000a31c, 0x9d0f96cf, 0x9d0f96cf, 0xa5cf9b4f, 0xa5cf9b4f, 0xa5cf9b4f },
+    { 0x0000a320, 0xb51fa69f, 0xb51fa69f, 0xbddfaf1f, 0xbddfaf1f, 0xbddfaf1f },
+    { 0x0000a324, 0xcb3fbd07, 0xcb3fbcbf, 0xd1ffc93f, 0xd1ffc93f, 0xd1ffc93f },
+    { 0x0000a328, 0x0000d7bf, 0x0000d7bf, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a32c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a330, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+};
+
+static const u32 ar5416Common[][2] = {
+    { 0x0000000c, 0x00000000 },
+    { 0x00000030, 0x00020015 },
+    { 0x00000034, 0x00000005 },
+    { 0x00000040, 0x00000000 },
+    { 0x00000044, 0x00000008 },
+    { 0x00000048, 0x00000008 },
+    { 0x0000004c, 0x00000010 },
+    { 0x00000050, 0x00000000 },
+    { 0x00000054, 0x0000001f },
+    { 0x00000800, 0x00000000 },
+    { 0x00000804, 0x00000000 },
+    { 0x00000808, 0x00000000 },
+    { 0x0000080c, 0x00000000 },
+    { 0x00000810, 0x00000000 },
+    { 0x00000814, 0x00000000 },
+    { 0x00000818, 0x00000000 },
+    { 0x0000081c, 0x00000000 },
+    { 0x00000820, 0x00000000 },
+    { 0x00000824, 0x00000000 },
+    { 0x00001040, 0x002ffc0f },
+    { 0x00001044, 0x002ffc0f },
+    { 0x00001048, 0x002ffc0f },
+    { 0x0000104c, 0x002ffc0f },
+    { 0x00001050, 0x002ffc0f },
+    { 0x00001054, 0x002ffc0f },
+    { 0x00001058, 0x002ffc0f },
+    { 0x0000105c, 0x002ffc0f },
+    { 0x00001060, 0x002ffc0f },
+    { 0x00001064, 0x002ffc0f },
+    { 0x00001230, 0x00000000 },
+    { 0x00001270, 0x00000000 },
+    { 0x00001038, 0x00000000 },
+    { 0x00001078, 0x00000000 },
+    { 0x000010b8, 0x00000000 },
+    { 0x000010f8, 0x00000000 },
+    { 0x00001138, 0x00000000 },
+    { 0x00001178, 0x00000000 },
+    { 0x000011b8, 0x00000000 },
+    { 0x000011f8, 0x00000000 },
+    { 0x00001238, 0x00000000 },
+    { 0x00001278, 0x00000000 },
+    { 0x000012b8, 0x00000000 },
+    { 0x000012f8, 0x00000000 },
+    { 0x00001338, 0x00000000 },
+    { 0x00001378, 0x00000000 },
+    { 0x000013b8, 0x00000000 },
+    { 0x000013f8, 0x00000000 },
+    { 0x00001438, 0x00000000 },
+    { 0x00001478, 0x00000000 },
+    { 0x000014b8, 0x00000000 },
+    { 0x000014f8, 0x00000000 },
+    { 0x00001538, 0x00000000 },
+    { 0x00001578, 0x00000000 },
+    { 0x000015b8, 0x00000000 },
+    { 0x000015f8, 0x00000000 },
+    { 0x00001638, 0x00000000 },
+    { 0x00001678, 0x00000000 },
+    { 0x000016b8, 0x00000000 },
+    { 0x000016f8, 0x00000000 },
+    { 0x00001738, 0x00000000 },
+    { 0x00001778, 0x00000000 },
+    { 0x000017b8, 0x00000000 },
+    { 0x000017f8, 0x00000000 },
+    { 0x0000103c, 0x00000000 },
+    { 0x0000107c, 0x00000000 },
+    { 0x000010bc, 0x00000000 },
+    { 0x000010fc, 0x00000000 },
+    { 0x0000113c, 0x00000000 },
+    { 0x0000117c, 0x00000000 },
+    { 0x000011bc, 0x00000000 },
+    { 0x000011fc, 0x00000000 },
+    { 0x0000123c, 0x00000000 },
+    { 0x0000127c, 0x00000000 },
+    { 0x000012bc, 0x00000000 },
+    { 0x000012fc, 0x00000000 },
+    { 0x0000133c, 0x00000000 },
+    { 0x0000137c, 0x00000000 },
+    { 0x000013bc, 0x00000000 },
+    { 0x000013fc, 0x00000000 },
+    { 0x0000143c, 0x00000000 },
+    { 0x0000147c, 0x00000000 },
+    { 0x00020010, 0x00000003 },
+    { 0x00020038, 0x000004c2 },
+    { 0x00008004, 0x00000000 },
+    { 0x00008008, 0x00000000 },
+    { 0x0000800c, 0x00000000 },
+    { 0x00008018, 0x00000700 },
+    { 0x00008020, 0x00000000 },
+    { 0x00008038, 0x00000000 },
+    { 0x0000803c, 0x00000000 },
+    { 0x00008048, 0x40000000 },
+    { 0x00008054, 0x00004000 },
+    { 0x00008058, 0x00000000 },
+    { 0x0000805c, 0x000fc78f },
+    { 0x00008060, 0x0000000f },
+    { 0x00008064, 0x00000000 },
+    { 0x000080c0, 0x2a82301a },
+    { 0x000080c4, 0x05dc01e0 },
+    { 0x000080c8, 0x1f402710 },
+    { 0x000080cc, 0x01f40000 },
+    { 0x000080d0, 0x00001e00 },
+    { 0x000080d4, 0x00000000 },
+    { 0x000080d8, 0x00400000 },
+    { 0x000080e0, 0xffffffff },
+    { 0x000080e4, 0x0000ffff },
+    { 0x000080e8, 0x003f3f3f },
+    { 0x000080ec, 0x00000000 },
+    { 0x000080f0, 0x00000000 },
+    { 0x000080f4, 0x00000000 },
+    { 0x000080f8, 0x00000000 },
+    { 0x000080fc, 0x00020000 },
+    { 0x00008100, 0x00020000 },
+    { 0x00008104, 0x00000001 },
+    { 0x00008108, 0x00000052 },
+    { 0x0000810c, 0x00000000 },
+    { 0x00008110, 0x00000168 },
+    { 0x00008118, 0x000100aa },
+    { 0x0000811c, 0x00003210 },
+    { 0x00008120, 0x08f04800 },
+    { 0x00008124, 0x00000000 },
+    { 0x00008128, 0x00000000 },
+    { 0x0000812c, 0x00000000 },
+    { 0x00008130, 0x00000000 },
+    { 0x00008134, 0x00000000 },
+    { 0x00008138, 0x00000000 },
+    { 0x0000813c, 0x00000000 },
+    { 0x00008144, 0x00000000 },
+    { 0x00008168, 0x00000000 },
+    { 0x0000816c, 0x00000000 },
+    { 0x00008170, 0x32143320 },
+    { 0x00008174, 0xfaa4fa50 },
+    { 0x00008178, 0x00000100 },
+    { 0x0000817c, 0x00000000 },
+    { 0x000081c4, 0x00000000 },
+    { 0x000081d0, 0x00003210 },
+    { 0x000081ec, 0x00000000 },
+    { 0x000081f0, 0x00000000 },
+    { 0x000081f4, 0x00000000 },
+    { 0x000081f8, 0x00000000 },
+    { 0x000081fc, 0x00000000 },
+    { 0x00008200, 0x00000000 },
+    { 0x00008204, 0x00000000 },
+    { 0x00008208, 0x00000000 },
+    { 0x0000820c, 0x00000000 },
+    { 0x00008210, 0x00000000 },
+    { 0x00008214, 0x00000000 },
+    { 0x00008218, 0x00000000 },
+    { 0x0000821c, 0x00000000 },
+    { 0x00008220, 0x00000000 },
+    { 0x00008224, 0x00000000 },
+    { 0x00008228, 0x00000000 },
+    { 0x0000822c, 0x00000000 },
+    { 0x00008230, 0x00000000 },
+    { 0x00008234, 0x00000000 },
+    { 0x00008238, 0x00000000 },
+    { 0x0000823c, 0x00000000 },
+    { 0x00008240, 0x00100000 },
+    { 0x00008244, 0x0010f400 },
+    { 0x00008248, 0x00000100 },
+    { 0x0000824c, 0x0001e800 },
+    { 0x00008250, 0x00000000 },
+    { 0x00008254, 0x00000000 },
+    { 0x00008258, 0x00000000 },
+    { 0x0000825c, 0x400000ff },
+    { 0x00008260, 0x00080922 },
+    { 0x00008270, 0x00000000 },
+    { 0x00008274, 0x40000000 },
+    { 0x00008278, 0x003e4180 },
+    { 0x0000827c, 0x00000000 },
+    { 0x00008284, 0x0000002c },
+    { 0x00008288, 0x0000002c },
+    { 0x0000828c, 0x00000000 },
+    { 0x00008294, 0x00000000 },
+    { 0x00008298, 0x00000000 },
+    { 0x00008300, 0x00000000 },
+    { 0x00008304, 0x00000000 },
+    { 0x00008308, 0x00000000 },
+    { 0x0000830c, 0x00000000 },
+    { 0x00008310, 0x00000000 },
+    { 0x00008314, 0x00000000 },
+    { 0x00008318, 0x00000000 },
+    { 0x00008328, 0x00000000 },
+    { 0x0000832c, 0x00000007 },
+    { 0x00008330, 0x00000302 },
+    { 0x00008334, 0x00000e00 },
+    { 0x00008338, 0x00000000 },
+    { 0x0000833c, 0x00000000 },
+    { 0x00008340, 0x000107ff },
+    { 0x00009808, 0x00000000 },
+    { 0x0000980c, 0xad848e19 },
+    { 0x00009810, 0x7d14e000 },
+    { 0x00009814, 0x9c0a9f6b },
+    { 0x0000981c, 0x00000000 },
+    { 0x0000982c, 0x0000a000 },
+    { 0x00009830, 0x00000000 },
+    { 0x0000983c, 0x00200400 },
+    { 0x00009840, 0x206a01ae },
+    { 0x0000984c, 0x1284233c },
+    { 0x00009854, 0x00000859 },
+    { 0x00009900, 0x00000000 },
+    { 0x00009904, 0x00000000 },
+    { 0x00009908, 0x00000000 },
+    { 0x0000990c, 0x00000000 },
+    { 0x0000991c, 0x10000fff },
+    { 0x00009920, 0x05100000 },
+    { 0x0000a920, 0x05100000 },
+    { 0x0000b920, 0x05100000 },
+    { 0x00009928, 0x00000001 },
+    { 0x0000992c, 0x00000004 },
+    { 0x00009934, 0x1e1f2022 },
+    { 0x00009938, 0x0a0b0c0d },
+    { 0x0000993c, 0x00000000 },
+    { 0x00009948, 0x9280b212 },
+    { 0x0000994c, 0x00020028 },
+    { 0x0000c95c, 0x004b6a8e },
+    { 0x0000c968, 0x000003ce },
+    { 0x00009970, 0x190fb514 },
+    { 0x00009974, 0x00000000 },
+    { 0x00009978, 0x00000001 },
+    { 0x0000997c, 0x00000000 },
+    { 0x00009980, 0x00000000 },
+    { 0x00009984, 0x00000000 },
+    { 0x00009988, 0x00000000 },
+    { 0x0000998c, 0x00000000 },
+    { 0x00009990, 0x00000000 },
+    { 0x00009994, 0x00000000 },
+    { 0x00009998, 0x00000000 },
+    { 0x0000999c, 0x00000000 },
+    { 0x000099a0, 0x00000000 },
+    { 0x000099a4, 0x00000001 },
+    { 0x000099a8, 0x201fff00 },
+    { 0x000099ac, 0x006f0000 },
+    { 0x000099b0, 0x03051000 },
+    { 0x000099dc, 0x00000000 },
+    { 0x000099e0, 0x00000200 },
+    { 0x000099e4, 0xaaaaaaaa },
+    { 0x000099e8, 0x3c466478 },
+    { 0x000099ec, 0x0cc80caa },
+    { 0x000099fc, 0x00001042 },
+    { 0x00009b00, 0x00000000 },
+    { 0x00009b04, 0x00000001 },
+    { 0x00009b08, 0x00000002 },
+    { 0x00009b0c, 0x00000003 },
+    { 0x00009b10, 0x00000004 },
+    { 0x00009b14, 0x00000005 },
+    { 0x00009b18, 0x00000008 },
+    { 0x00009b1c, 0x00000009 },
+    { 0x00009b20, 0x0000000a },
+    { 0x00009b24, 0x0000000b },
+    { 0x00009b28, 0x0000000c },
+    { 0x00009b2c, 0x0000000d },
+    { 0x00009b30, 0x00000010 },
+    { 0x00009b34, 0x00000011 },
+    { 0x00009b38, 0x00000012 },
+    { 0x00009b3c, 0x00000013 },
+    { 0x00009b40, 0x00000014 },
+    { 0x00009b44, 0x00000015 },
+    { 0x00009b48, 0x00000018 },
+    { 0x00009b4c, 0x00000019 },
+    { 0x00009b50, 0x0000001a },
+    { 0x00009b54, 0x0000001b },
+    { 0x00009b58, 0x0000001c },
+    { 0x00009b5c, 0x0000001d },
+    { 0x00009b60, 0x00000020 },
+    { 0x00009b64, 0x00000021 },
+    { 0x00009b68, 0x00000022 },
+    { 0x00009b6c, 0x00000023 },
+    { 0x00009b70, 0x00000024 },
+    { 0x00009b74, 0x00000025 },
+    { 0x00009b78, 0x00000028 },
+    { 0x00009b7c, 0x00000029 },
+    { 0x00009b80, 0x0000002a },
+    { 0x00009b84, 0x0000002b },
+    { 0x00009b88, 0x0000002c },
+    { 0x00009b8c, 0x0000002d },
+    { 0x00009b90, 0x00000030 },
+    { 0x00009b94, 0x00000031 },
+    { 0x00009b98, 0x00000032 },
+    { 0x00009b9c, 0x00000033 },
+    { 0x00009ba0, 0x00000034 },
+    { 0x00009ba4, 0x00000035 },
+    { 0x00009ba8, 0x00000035 },
+    { 0x00009bac, 0x00000035 },
+    { 0x00009bb0, 0x00000035 },
+    { 0x00009bb4, 0x00000035 },
+    { 0x00009bb8, 0x00000035 },
+    { 0x00009bbc, 0x00000035 },
+    { 0x00009bc0, 0x00000035 },
+    { 0x00009bc4, 0x00000035 },
+    { 0x00009bc8, 0x00000035 },
+    { 0x00009bcc, 0x00000035 },
+    { 0x00009bd0, 0x00000035 },
+    { 0x00009bd4, 0x00000035 },
+    { 0x00009bd8, 0x00000035 },
+    { 0x00009bdc, 0x00000035 },
+    { 0x00009be0, 0x00000035 },
+    { 0x00009be4, 0x00000035 },
+    { 0x00009be8, 0x00000035 },
+    { 0x00009bec, 0x00000035 },
+    { 0x00009bf0, 0x00000035 },
+    { 0x00009bf4, 0x00000035 },
+    { 0x00009bf8, 0x00000010 },
+    { 0x00009bfc, 0x0000001a },
+    { 0x0000a210, 0x40806333 },
+    { 0x0000a214, 0x00106c10 },
+    { 0x0000a218, 0x009c4060 },
+    { 0x0000a220, 0x018830c6 },
+    { 0x0000a224, 0x00000400 },
+    { 0x0000a228, 0x001a0bb5 },
+    { 0x0000a22c, 0x00000000 },
+    { 0x0000a234, 0x20202020 },
+    { 0x0000a238, 0x20202020 },
+    { 0x0000a23c, 0x13c889ae },
+    { 0x0000a240, 0x38490a20 },
+    { 0x0000a244, 0x00007bb6 },
+    { 0x0000a248, 0x0fff3ffc },
+    { 0x0000a24c, 0x00000001 },
+    { 0x0000a250, 0x0000a000 },
+    { 0x0000a254, 0x00000000 },
+    { 0x0000a258, 0x0cc75380 },
+    { 0x0000a25c, 0x0f0f0f01 },
+    { 0x0000a260, 0xdfa91f01 },
+    { 0x0000a268, 0x00000001 },
+    { 0x0000a26c, 0x0ebae9c6 },
+    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000c26c, 0x0ebae9c6 },
+    { 0x0000d270, 0x00820820 },
+    { 0x0000a278, 0x1ce739ce },
+    { 0x0000a27c, 0x050701ce },
+    { 0x0000a338, 0x00000000 },
+    { 0x0000a33c, 0x00000000 },
+    { 0x0000a340, 0x00000000 },
+    { 0x0000a344, 0x00000000 },
+    { 0x0000a348, 0x3fffffff },
+    { 0x0000a34c, 0x3fffffff },
+    { 0x0000a350, 0x3fffffff },
+    { 0x0000a354, 0x0003ffff },
+    { 0x0000a358, 0x79a8aa33 },
+    { 0x0000d35c, 0x07ffffef },
+    { 0x0000d360, 0x0fffffe7 },
+    { 0x0000d364, 0x17ffffe5 },
+    { 0x0000d368, 0x1fffffe4 },
+    { 0x0000d36c, 0x37ffffe3 },
+    { 0x0000d370, 0x3fffffe3 },
+    { 0x0000d374, 0x57ffffe3 },
+    { 0x0000d378, 0x5fffffe2 },
+    { 0x0000d37c, 0x7fffffe2 },
+    { 0x0000d380, 0x7f3c7bba },
+    { 0x0000d384, 0xf3307ff0 },
+    { 0x0000a388, 0x0c000000 },
+    { 0x0000a38c, 0x20202020 },
+    { 0x0000a390, 0x20202020 },
+    { 0x0000a394, 0x1ce739ce },
+    { 0x0000a398, 0x000001ce },
+    { 0x0000a39c, 0x00000001 },
+    { 0x0000a3a0, 0x00000000 },
+    { 0x0000a3a4, 0x00000000 },
+    { 0x0000a3a8, 0x00000000 },
+    { 0x0000a3ac, 0x00000000 },
+    { 0x0000a3b0, 0x00000000 },
+    { 0x0000a3b4, 0x00000000 },
+    { 0x0000a3b8, 0x00000000 },
+    { 0x0000a3bc, 0x00000000 },
+    { 0x0000a3c0, 0x00000000 },
+    { 0x0000a3c4, 0x00000000 },
+    { 0x0000a3c8, 0x00000246 },
+    { 0x0000a3cc, 0x20202020 },
+    { 0x0000a3d0, 0x20202020 },
+    { 0x0000a3d4, 0x20202020 },
+    { 0x0000a3dc, 0x1ce739ce },
+    { 0x0000a3e0, 0x000001ce },
+};
+
+static const u32 ar5416Bank0[][2] = {
+    { 0x000098b0, 0x1e5795e5 },
+    { 0x000098e0, 0x02008020 },
+};
+
+static const u32 ar5416BB_RfGain[][3] = {
+    { 0x00009a00, 0x00000000, 0x00000000 },
+    { 0x00009a04, 0x00000040, 0x00000040 },
+    { 0x00009a08, 0x00000080, 0x00000080 },
+    { 0x00009a0c, 0x000001a1, 0x00000141 },
+    { 0x00009a10, 0x000001e1, 0x00000181 },
+    { 0x00009a14, 0x00000021, 0x000001c1 },
+    { 0x00009a18, 0x00000061, 0x00000001 },
+    { 0x00009a1c, 0x00000168, 0x00000041 },
+    { 0x00009a20, 0x000001a8, 0x000001a8 },
+    { 0x00009a24, 0x000001e8, 0x000001e8 },
+    { 0x00009a28, 0x00000028, 0x00000028 },
+    { 0x00009a2c, 0x00000068, 0x00000068 },
+    { 0x00009a30, 0x00000189, 0x000000a8 },
+    { 0x00009a34, 0x000001c9, 0x00000169 },
+    { 0x00009a38, 0x00000009, 0x000001a9 },
+    { 0x00009a3c, 0x00000049, 0x000001e9 },
+    { 0x00009a40, 0x00000089, 0x00000029 },
+    { 0x00009a44, 0x00000170, 0x00000069 },
+    { 0x00009a48, 0x000001b0, 0x00000190 },
+    { 0x00009a4c, 0x000001f0, 0x000001d0 },
+    { 0x00009a50, 0x00000030, 0x00000010 },
+    { 0x00009a54, 0x00000070, 0x00000050 },
+    { 0x00009a58, 0x00000191, 0x00000090 },
+    { 0x00009a5c, 0x000001d1, 0x00000151 },
+    { 0x00009a60, 0x00000011, 0x00000191 },
+    { 0x00009a64, 0x00000051, 0x000001d1 },
+    { 0x00009a68, 0x00000091, 0x00000011 },
+    { 0x00009a6c, 0x000001b8, 0x00000051 },
+    { 0x00009a70, 0x000001f8, 0x00000198 },
+    { 0x00009a74, 0x00000038, 0x000001d8 },
+    { 0x00009a78, 0x00000078, 0x00000018 },
+    { 0x00009a7c, 0x00000199, 0x00000058 },
+    { 0x00009a80, 0x000001d9, 0x00000098 },
+    { 0x00009a84, 0x00000019, 0x00000159 },
+    { 0x00009a88, 0x00000059, 0x00000199 },
+    { 0x00009a8c, 0x00000099, 0x000001d9 },
+    { 0x00009a90, 0x000000d9, 0x00000019 },
+    { 0x00009a94, 0x000000f9, 0x00000059 },
+    { 0x00009a98, 0x000000f9, 0x00000099 },
+    { 0x00009a9c, 0x000000f9, 0x000000d9 },
+    { 0x00009aa0, 0x000000f9, 0x000000f9 },
+    { 0x00009aa4, 0x000000f9, 0x000000f9 },
+    { 0x00009aa8, 0x000000f9, 0x000000f9 },
+    { 0x00009aac, 0x000000f9, 0x000000f9 },
+    { 0x00009ab0, 0x000000f9, 0x000000f9 },
+    { 0x00009ab4, 0x000000f9, 0x000000f9 },
+    { 0x00009ab8, 0x000000f9, 0x000000f9 },
+    { 0x00009abc, 0x000000f9, 0x000000f9 },
+    { 0x00009ac0, 0x000000f9, 0x000000f9 },
+    { 0x00009ac4, 0x000000f9, 0x000000f9 },
+    { 0x00009ac8, 0x000000f9, 0x000000f9 },
+    { 0x00009acc, 0x000000f9, 0x000000f9 },
+    { 0x00009ad0, 0x000000f9, 0x000000f9 },
+    { 0x00009ad4, 0x000000f9, 0x000000f9 },
+    { 0x00009ad8, 0x000000f9, 0x000000f9 },
+    { 0x00009adc, 0x000000f9, 0x000000f9 },
+    { 0x00009ae0, 0x000000f9, 0x000000f9 },
+    { 0x00009ae4, 0x000000f9, 0x000000f9 },
+    { 0x00009ae8, 0x000000f9, 0x000000f9 },
+    { 0x00009aec, 0x000000f9, 0x000000f9 },
+    { 0x00009af0, 0x000000f9, 0x000000f9 },
+    { 0x00009af4, 0x000000f9, 0x000000f9 },
+    { 0x00009af8, 0x000000f9, 0x000000f9 },
+    { 0x00009afc, 0x000000f9, 0x000000f9 },
+};
+
+static const u32 ar5416Bank1[][2] = {
+    { 0x000098b0, 0x02108421},
+    { 0x000098ec, 0x00000008},
+};
+
+static const u32 ar5416Bank2[][2] = {
+    { 0x000098b0, 0x0e73ff17},
+    { 0x000098e0, 0x00000420},
+};
+
+static const u32 ar5416Bank3[][3] = {
+    { 0x000098f0, 0x01400018, 0x01c00018 },
+};
+
+static const u32 ar5416Bank6[][3] = {
+
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x004210a2, 0x004210a2 },
+    { 0x0000989c, 0x0014000f, 0x0014000f },
+    { 0x0000989c, 0x00c40002, 0x00c40002 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x000180d6, 0x000180d6 },
+    { 0x0000989c, 0x0000c0aa, 0x0000c0aa },
+    { 0x0000989c, 0x000000b1, 0x000000b1 },
+    { 0x0000989c, 0x00002000, 0x00002000 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+
+static const u32 ar5416Bank6TPC[][3] = {
+
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x40ff0000, 0x40ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x00423022, 0x00423022 },
+    { 0x0000989c, 0x2014008f, 0x2014008f },
+    { 0x0000989c, 0x00c40002, 0x00c40002 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x0001805e, 0x0001805e },
+    { 0x0000989c, 0x0000c0ab, 0x0000c0ab },
+    { 0x0000989c, 0x000000e1, 0x000000e1 },
+    { 0x0000989c, 0x00007080, 0x00007080 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+static const u32 ar5416Bank7[][2] = {
+    { 0x0000989c, 0x00000500 },
+    { 0x0000989c, 0x00000800 },
+    { 0x000098cc, 0x0000000e },
+};
+
+static const u32 ar5416Addac[][2] = {
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000010 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x000000c0 },
+    {0x0000989c, 0x00000015 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x0000989c, 0x00000000 },
+    {0x000098cc, 0x00000000 },
+};
+
+
+static const u32 ar5416Modes_9160[][6] = {
+    { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+    { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+    { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+    { 0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000, 0x00014008 },
+    { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
+    { 0x0000801c, 0x128d93a7, 0x128d93cf, 0x12e013d7, 0x12e013ab, 0x098813cf },
+    { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+    { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+    { 0x00009844, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0, 0x037216a0 },
+    { 0x00009848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000a848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x0000b848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
+    { 0x00009850, 0x6d48b4e2, 0x6d48b4e2, 0x6d48b0e2, 0x6d48b0e2, 0x6d48b0e2 },
+    { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e },
+    { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e },
+    { 0x00009860, 0x00048d18, 0x00048d18, 0x00048d20, 0x00048d20, 0x00048d18 },
+    { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009868, 0x409a40d0, 0x409a40d0, 0x409a40d0, 0x409a40d0, 0x409a40d0 },
+    { 0x0000986c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 },
+    { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 },
+    { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+    { 0x00009924, 0xd00a8a07, 0xd00a8a07, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d },
+    { 0x00009944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020 },
+    { 0x00009960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40 },
+    { 0x0000a960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40 },
+    { 0x0000b960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40 },
+    { 0x00009964, 0x00001120, 0x00001120, 0x00001120, 0x00001120, 0x00001120 },
+    { 0x0000c9bc, 0x001a0600, 0x001a0600, 0x001a0c00, 0x001a0c00, 0x001a0c00 },
+    { 0x000099c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, 0x038919be },
+    { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+    { 0x000099c8, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329 },
+    { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+    { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+    { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a204, 0x00000880, 0x00000880, 0x00000880, 0x00000880, 0x00000880 },
+    { 0x0000a208, 0xd6be4788, 0xd6be4788, 0xd03e4788, 0xd03e4788, 0xd03e4788 },
+    { 0x0000a20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000b20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000c20c, 0x002fc160, 0x002fc160, 0x002ac120, 0x002ac120, 0x002ac120 },
+    { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
+    { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a274, 0x0a1a9caa, 0x0a1a9caa, 0x0a1a7caa, 0x0a1a7caa, 0x0a1a7caa },
+    { 0x0000a300, 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 },
+    { 0x0000a304, 0x30032602, 0x30032602, 0x2e032402, 0x2e032402, 0x2e032402 },
+    { 0x0000a308, 0x48073e06, 0x48073e06, 0x4a0a3c06, 0x4a0a3c06, 0x4a0a3c06 },
+    { 0x0000a30c, 0x560b4c0a, 0x560b4c0a, 0x621a540b, 0x621a540b, 0x621a540b },
+    { 0x0000a310, 0x641a600f, 0x641a600f, 0x764f6c1b, 0x764f6c1b, 0x764f6c1b },
+    { 0x0000a314, 0x7a4f6e1b, 0x7a4f6e1b, 0x845b7a5a, 0x845b7a5a, 0x845b7a5a },
+    { 0x0000a318, 0x8c5b7e5a, 0x8c5b7e5a, 0x950f8ccf, 0x950f8ccf, 0x950f8ccf },
+    { 0x0000a31c, 0x9d0f96cf, 0x9d0f96cf, 0xa5cf9b4f, 0xa5cf9b4f, 0xa5cf9b4f },
+    { 0x0000a320, 0xb51fa69f, 0xb51fa69f, 0xbddfaf1f, 0xbddfaf1f, 0xbddfaf1f },
+    { 0x0000a324, 0xcb3fbd07, 0xcb3fbcbf, 0xd1ffc93f, 0xd1ffc93f, 0xd1ffc93f },
+    { 0x0000a328, 0x0000d7bf, 0x0000d7bf, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a32c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a330, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+};
+
+static const u32 ar5416Common_9160[][2] = {
+    { 0x0000000c, 0x00000000 },
+    { 0x00000030, 0x00020015 },
+    { 0x00000034, 0x00000005 },
+    { 0x00000040, 0x00000000 },
+    { 0x00000044, 0x00000008 },
+    { 0x00000048, 0x00000008 },
+    { 0x0000004c, 0x00000010 },
+    { 0x00000050, 0x00000000 },
+    { 0x00000054, 0x0000001f },
+    { 0x00000800, 0x00000000 },
+    { 0x00000804, 0x00000000 },
+    { 0x00000808, 0x00000000 },
+    { 0x0000080c, 0x00000000 },
+    { 0x00000810, 0x00000000 },
+    { 0x00000814, 0x00000000 },
+    { 0x00000818, 0x00000000 },
+    { 0x0000081c, 0x00000000 },
+    { 0x00000820, 0x00000000 },
+    { 0x00000824, 0x00000000 },
+    { 0x00001040, 0x002ffc0f },
+    { 0x00001044, 0x002ffc0f },
+    { 0x00001048, 0x002ffc0f },
+    { 0x0000104c, 0x002ffc0f },
+    { 0x00001050, 0x002ffc0f },
+    { 0x00001054, 0x002ffc0f },
+    { 0x00001058, 0x002ffc0f },
+    { 0x0000105c, 0x002ffc0f },
+    { 0x00001060, 0x002ffc0f },
+    { 0x00001064, 0x002ffc0f },
+    { 0x00001230, 0x00000000 },
+    { 0x00001270, 0x00000000 },
+    { 0x00001038, 0x00000000 },
+    { 0x00001078, 0x00000000 },
+    { 0x000010b8, 0x00000000 },
+    { 0x000010f8, 0x00000000 },
+    { 0x00001138, 0x00000000 },
+    { 0x00001178, 0x00000000 },
+    { 0x000011b8, 0x00000000 },
+    { 0x000011f8, 0x00000000 },
+    { 0x00001238, 0x00000000 },
+    { 0x00001278, 0x00000000 },
+    { 0x000012b8, 0x00000000 },
+    { 0x000012f8, 0x00000000 },
+    { 0x00001338, 0x00000000 },
+    { 0x00001378, 0x00000000 },
+    { 0x000013b8, 0x00000000 },
+    { 0x000013f8, 0x00000000 },
+    { 0x00001438, 0x00000000 },
+    { 0x00001478, 0x00000000 },
+    { 0x000014b8, 0x00000000 },
+    { 0x000014f8, 0x00000000 },
+    { 0x00001538, 0x00000000 },
+    { 0x00001578, 0x00000000 },
+    { 0x000015b8, 0x00000000 },
+    { 0x000015f8, 0x00000000 },
+    { 0x00001638, 0x00000000 },
+    { 0x00001678, 0x00000000 },
+    { 0x000016b8, 0x00000000 },
+    { 0x000016f8, 0x00000000 },
+    { 0x00001738, 0x00000000 },
+    { 0x00001778, 0x00000000 },
+    { 0x000017b8, 0x00000000 },
+    { 0x000017f8, 0x00000000 },
+    { 0x0000103c, 0x00000000 },
+    { 0x0000107c, 0x00000000 },
+    { 0x000010bc, 0x00000000 },
+    { 0x000010fc, 0x00000000 },
+    { 0x0000113c, 0x00000000 },
+    { 0x0000117c, 0x00000000 },
+    { 0x000011bc, 0x00000000 },
+    { 0x000011fc, 0x00000000 },
+    { 0x0000123c, 0x00000000 },
+    { 0x0000127c, 0x00000000 },
+    { 0x000012bc, 0x00000000 },
+    { 0x000012fc, 0x00000000 },
+    { 0x0000133c, 0x00000000 },
+    { 0x0000137c, 0x00000000 },
+    { 0x000013bc, 0x00000000 },
+    { 0x000013fc, 0x00000000 },
+    { 0x0000143c, 0x00000000 },
+    { 0x0000147c, 0x00000000 },
+    { 0x00004030, 0x00000002 },
+    { 0x0000403c, 0x00000002 },
+    { 0x00007010, 0x00000020 },
+    { 0x00007038, 0x000004c2 },
+    { 0x00008004, 0x00000000 },
+    { 0x00008008, 0x00000000 },
+    { 0x0000800c, 0x00000000 },
+    { 0x00008018, 0x00000700 },
+    { 0x00008020, 0x00000000 },
+    { 0x00008038, 0x00000000 },
+    { 0x0000803c, 0x00000000 },
+    { 0x00008048, 0x40000000 },
+    { 0x00008054, 0x00000000 },
+    { 0x00008058, 0x00000000 },
+    { 0x0000805c, 0x000fc78f },
+    { 0x00008060, 0x0000000f },
+    { 0x00008064, 0x00000000 },
+    { 0x000080c0, 0x2a82301a },
+    { 0x000080c4, 0x05dc01e0 },
+    { 0x000080c8, 0x1f402710 },
+    { 0x000080cc, 0x01f40000 },
+    { 0x000080d0, 0x00001e00 },
+    { 0x000080d4, 0x00000000 },
+    { 0x000080d8, 0x00400000 },
+    { 0x000080e0, 0xffffffff },
+    { 0x000080e4, 0x0000ffff },
+    { 0x000080e8, 0x003f3f3f },
+    { 0x000080ec, 0x00000000 },
+    { 0x000080f0, 0x00000000 },
+    { 0x000080f4, 0x00000000 },
+    { 0x000080f8, 0x00000000 },
+    { 0x000080fc, 0x00020000 },
+    { 0x00008100, 0x00020000 },
+    { 0x00008104, 0x00000001 },
+    { 0x00008108, 0x00000052 },
+    { 0x0000810c, 0x00000000 },
+    { 0x00008110, 0x00000168 },
+    { 0x00008118, 0x000100aa },
+    { 0x0000811c, 0x00003210 },
+    { 0x00008120, 0x08f04800 },
+    { 0x00008124, 0x00000000 },
+    { 0x00008128, 0x00000000 },
+    { 0x0000812c, 0x00000000 },
+    { 0x00008130, 0x00000000 },
+    { 0x00008134, 0x00000000 },
+    { 0x00008138, 0x00000000 },
+    { 0x0000813c, 0x00000000 },
+    { 0x00008144, 0x00000000 },
+    { 0x00008168, 0x00000000 },
+    { 0x0000816c, 0x00000000 },
+    { 0x00008170, 0x32143320 },
+    { 0x00008174, 0xfaa4fa50 },
+    { 0x00008178, 0x00000100 },
+    { 0x0000817c, 0x00000000 },
+    { 0x000081c4, 0x00000000 },
+    { 0x000081d0, 0x00003210 },
+    { 0x000081ec, 0x00000000 },
+    { 0x000081f0, 0x00000000 },
+    { 0x000081f4, 0x00000000 },
+    { 0x000081f8, 0x00000000 },
+    { 0x000081fc, 0x00000000 },
+    { 0x00008200, 0x00000000 },
+    { 0x00008204, 0x00000000 },
+    { 0x00008208, 0x00000000 },
+    { 0x0000820c, 0x00000000 },
+    { 0x00008210, 0x00000000 },
+    { 0x00008214, 0x00000000 },
+    { 0x00008218, 0x00000000 },
+    { 0x0000821c, 0x00000000 },
+    { 0x00008220, 0x00000000 },
+    { 0x00008224, 0x00000000 },
+    { 0x00008228, 0x00000000 },
+    { 0x0000822c, 0x00000000 },
+    { 0x00008230, 0x00000000 },
+    { 0x00008234, 0x00000000 },
+    { 0x00008238, 0x00000000 },
+    { 0x0000823c, 0x00000000 },
+    { 0x00008240, 0x00100000 },
+    { 0x00008244, 0x0010f400 },
+    { 0x00008248, 0x00000100 },
+    { 0x0000824c, 0x0001e800 },
+    { 0x00008250, 0x00000000 },
+    { 0x00008254, 0x00000000 },
+    { 0x00008258, 0x00000000 },
+    { 0x0000825c, 0x400000ff },
+    { 0x00008260, 0x00080922 },
+    { 0x00008270, 0x00000000 },
+    { 0x00008274, 0x40000000 },
+    { 0x00008278, 0x003e4180 },
+    { 0x0000827c, 0x00000000 },
+    { 0x00008284, 0x0000002c },
+    { 0x00008288, 0x0000002c },
+    { 0x0000828c, 0x00000000 },
+    { 0x00008294, 0x00000000 },
+    { 0x00008298, 0x00000000 },
+    { 0x00008300, 0x00000000 },
+    { 0x00008304, 0x00000000 },
+    { 0x00008308, 0x00000000 },
+    { 0x0000830c, 0x00000000 },
+    { 0x00008310, 0x00000000 },
+    { 0x00008314, 0x00000000 },
+    { 0x00008318, 0x00000000 },
+    { 0x00008328, 0x00000000 },
+    { 0x0000832c, 0x00000007 },
+    { 0x00008330, 0x00000302 },
+    { 0x00008334, 0x00000e00 },
+    { 0x00008338, 0x00000000 },
+    { 0x0000833c, 0x00000000 },
+    { 0x00008340, 0x000107ff },
+    { 0x00009808, 0x00000000 },
+    { 0x0000980c, 0xad848e19 },
+    { 0x00009810, 0x7d14e000 },
+    { 0x00009814, 0x9c0a9f6b },
+    { 0x0000981c, 0x00000000 },
+    { 0x0000982c, 0x0000a000 },
+    { 0x00009830, 0x00000000 },
+    { 0x0000983c, 0x00200400 },
+    { 0x00009840, 0x206a01ae },
+    { 0x0000984c, 0x1284233c },
+    { 0x00009854, 0x00000859 },
+    { 0x00009900, 0x00000000 },
+    { 0x00009904, 0x00000000 },
+    { 0x00009908, 0x00000000 },
+    { 0x0000990c, 0x00000000 },
+    { 0x0000991c, 0x10000fff },
+    { 0x00009920, 0x05100000 },
+    { 0x0000a920, 0x05100000 },
+    { 0x0000b920, 0x05100000 },
+    { 0x00009928, 0x00000001 },
+    { 0x0000992c, 0x00000004 },
+    { 0x00009934, 0x1e1f2022 },
+    { 0x00009938, 0x0a0b0c0d },
+    { 0x0000993c, 0x00000000 },
+    { 0x00009948, 0x9280b212 },
+    { 0x0000994c, 0x00020028 },
+    { 0x00009954, 0x5f3ca3de },
+    { 0x00009958, 0x2108ecff },
+    { 0x00009940, 0x00750604 },
+    { 0x0000c95c, 0x004b6a8e },
+    { 0x0000c968, 0x000003ce },
+    { 0x00009970, 0x190fb515 },
+    { 0x00009974, 0x00000000 },
+    { 0x00009978, 0x00000001 },
+    { 0x0000997c, 0x00000000 },
+    { 0x00009980, 0x00000000 },
+    { 0x00009984, 0x00000000 },
+    { 0x00009988, 0x00000000 },
+    { 0x0000998c, 0x00000000 },
+    { 0x00009990, 0x00000000 },
+    { 0x00009994, 0x00000000 },
+    { 0x00009998, 0x00000000 },
+    { 0x0000999c, 0x00000000 },
+    { 0x000099a0, 0x00000000 },
+    { 0x000099a4, 0x00000001 },
+    { 0x000099a8, 0x201fff00 },
+    { 0x000099ac, 0x006f0000 },
+    { 0x000099b0, 0x03051000 },
+    { 0x000099dc, 0x00000000 },
+    { 0x000099e0, 0x00000200 },
+    { 0x000099e4, 0xaaaaaaaa },
+    { 0x000099e8, 0x3c466478 },
+    { 0x000099ec, 0x0cc80caa },
+    { 0x000099fc, 0x00001042 },
+    { 0x00009b00, 0x00000000 },
+    { 0x00009b04, 0x00000001 },
+    { 0x00009b08, 0x00000002 },
+    { 0x00009b0c, 0x00000003 },
+    { 0x00009b10, 0x00000004 },
+    { 0x00009b14, 0x00000005 },
+    { 0x00009b18, 0x00000008 },
+    { 0x00009b1c, 0x00000009 },
+    { 0x00009b20, 0x0000000a },
+    { 0x00009b24, 0x0000000b },
+    { 0x00009b28, 0x0000000c },
+    { 0x00009b2c, 0x0000000d },
+    { 0x00009b30, 0x00000010 },
+    { 0x00009b34, 0x00000011 },
+    { 0x00009b38, 0x00000012 },
+    { 0x00009b3c, 0x00000013 },
+    { 0x00009b40, 0x00000014 },
+    { 0x00009b44, 0x00000015 },
+    { 0x00009b48, 0x00000018 },
+    { 0x00009b4c, 0x00000019 },
+    { 0x00009b50, 0x0000001a },
+    { 0x00009b54, 0x0000001b },
+    { 0x00009b58, 0x0000001c },
+    { 0x00009b5c, 0x0000001d },
+    { 0x00009b60, 0x00000020 },
+    { 0x00009b64, 0x00000021 },
+    { 0x00009b68, 0x00000022 },
+    { 0x00009b6c, 0x00000023 },
+    { 0x00009b70, 0x00000024 },
+    { 0x00009b74, 0x00000025 },
+    { 0x00009b78, 0x00000028 },
+    { 0x00009b7c, 0x00000029 },
+    { 0x00009b80, 0x0000002a },
+    { 0x00009b84, 0x0000002b },
+    { 0x00009b88, 0x0000002c },
+    { 0x00009b8c, 0x0000002d },
+    { 0x00009b90, 0x00000030 },
+    { 0x00009b94, 0x00000031 },
+    { 0x00009b98, 0x00000032 },
+    { 0x00009b9c, 0x00000033 },
+    { 0x00009ba0, 0x00000034 },
+    { 0x00009ba4, 0x00000035 },
+    { 0x00009ba8, 0x00000035 },
+    { 0x00009bac, 0x00000035 },
+    { 0x00009bb0, 0x00000035 },
+    { 0x00009bb4, 0x00000035 },
+    { 0x00009bb8, 0x00000035 },
+    { 0x00009bbc, 0x00000035 },
+    { 0x00009bc0, 0x00000035 },
+    { 0x00009bc4, 0x00000035 },
+    { 0x00009bc8, 0x00000035 },
+    { 0x00009bcc, 0x00000035 },
+    { 0x00009bd0, 0x00000035 },
+    { 0x00009bd4, 0x00000035 },
+    { 0x00009bd8, 0x00000035 },
+    { 0x00009bdc, 0x00000035 },
+    { 0x00009be0, 0x00000035 },
+    { 0x00009be4, 0x00000035 },
+    { 0x00009be8, 0x00000035 },
+    { 0x00009bec, 0x00000035 },
+    { 0x00009bf0, 0x00000035 },
+    { 0x00009bf4, 0x00000035 },
+    { 0x00009bf8, 0x00000010 },
+    { 0x00009bfc, 0x0000001a },
+    { 0x0000a210, 0x40806333 },
+    { 0x0000a214, 0x00106c10 },
+    { 0x0000a218, 0x009c4060 },
+    { 0x0000a220, 0x018830c6 },
+    { 0x0000a224, 0x00000400 },
+    { 0x0000a228, 0x001a0bb5 },
+    { 0x0000a22c, 0x00000000 },
+    { 0x0000a234, 0x20202020 },
+    { 0x0000a238, 0x20202020 },
+    { 0x0000a23c, 0x13c889af },
+    { 0x0000a240, 0x38490a20 },
+    { 0x0000a244, 0x00007bb6 },
+    { 0x0000a248, 0x0fff3ffc },
+    { 0x0000a24c, 0x00000001 },
+    { 0x0000a250, 0x0000a000 },
+    { 0x0000a254, 0x00000000 },
+    { 0x0000a258, 0x0cc75380 },
+    { 0x0000a25c, 0x0f0f0f01 },
+    { 0x0000a260, 0xdfa91f01 },
+    { 0x0000a268, 0x00000001 },
+    { 0x0000a26c, 0x0ebae9c6 },
+    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000c26c, 0x0ebae9c6 },
+    { 0x0000d270, 0x00820820 },
+    { 0x0000a278, 0x1ce739ce },
+    { 0x0000a27c, 0x050701ce },
+    { 0x0000a338, 0x00000000 },
+    { 0x0000a33c, 0x00000000 },
+    { 0x0000a340, 0x00000000 },
+    { 0x0000a344, 0x00000000 },
+    { 0x0000a348, 0x3fffffff },
+    { 0x0000a34c, 0x3fffffff },
+    { 0x0000a350, 0x3fffffff },
+    { 0x0000a354, 0x0003ffff },
+    { 0x0000a358, 0x79a8aa33 },
+    { 0x0000d35c, 0x07ffffef },
+    { 0x0000d360, 0x0fffffe7 },
+    { 0x0000d364, 0x17ffffe5 },
+    { 0x0000d368, 0x1fffffe4 },
+    { 0x0000d36c, 0x37ffffe3 },
+    { 0x0000d370, 0x3fffffe3 },
+    { 0x0000d374, 0x57ffffe3 },
+    { 0x0000d378, 0x5fffffe2 },
+    { 0x0000d37c, 0x7fffffe2 },
+    { 0x0000d380, 0x7f3c7bba },
+    { 0x0000d384, 0xf3307ff0 },
+    { 0x0000a388, 0x0c000000 },
+    { 0x0000a38c, 0x20202020 },
+    { 0x0000a390, 0x20202020 },
+    { 0x0000a394, 0x1ce739ce },
+    { 0x0000a398, 0x000001ce },
+    { 0x0000a39c, 0x00000001 },
+    { 0x0000a3a0, 0x00000000 },
+    { 0x0000a3a4, 0x00000000 },
+    { 0x0000a3a8, 0x00000000 },
+    { 0x0000a3ac, 0x00000000 },
+    { 0x0000a3b0, 0x00000000 },
+    { 0x0000a3b4, 0x00000000 },
+    { 0x0000a3b8, 0x00000000 },
+    { 0x0000a3bc, 0x00000000 },
+    { 0x0000a3c0, 0x00000000 },
+    { 0x0000a3c4, 0x00000000 },
+    { 0x0000a3c8, 0x00000246 },
+    { 0x0000a3cc, 0x20202020 },
+    { 0x0000a3d0, 0x20202020 },
+    { 0x0000a3d4, 0x20202020 },
+    { 0x0000a3dc, 0x1ce739ce },
+    { 0x0000a3e0, 0x000001ce },
+};
+
+static const u32 ar5416Bank0_9160[][2] = {
+    { 0x000098b0, 0x1e5795e5 },
+    { 0x000098e0, 0x02008020 },
+};
+
+static const u32 ar5416BB_RfGain_9160[][3] = {
+    { 0x00009a00, 0x00000000, 0x00000000 },
+    { 0x00009a04, 0x00000040, 0x00000040 },
+    { 0x00009a08, 0x00000080, 0x00000080 },
+    { 0x00009a0c, 0x000001a1, 0x00000141 },
+    { 0x00009a10, 0x000001e1, 0x00000181 },
+    { 0x00009a14, 0x00000021, 0x000001c1 },
+    { 0x00009a18, 0x00000061, 0x00000001 },
+    { 0x00009a1c, 0x00000168, 0x00000041 },
+    { 0x00009a20, 0x000001a8, 0x000001a8 },
+    { 0x00009a24, 0x000001e8, 0x000001e8 },
+    { 0x00009a28, 0x00000028, 0x00000028 },
+    { 0x00009a2c, 0x00000068, 0x00000068 },
+    { 0x00009a30, 0x00000189, 0x000000a8 },
+    { 0x00009a34, 0x000001c9, 0x00000169 },
+    { 0x00009a38, 0x00000009, 0x000001a9 },
+    { 0x00009a3c, 0x00000049, 0x000001e9 },
+    { 0x00009a40, 0x00000089, 0x00000029 },
+    { 0x00009a44, 0x00000170, 0x00000069 },
+    { 0x00009a48, 0x000001b0, 0x00000190 },
+    { 0x00009a4c, 0x000001f0, 0x000001d0 },
+    { 0x00009a50, 0x00000030, 0x00000010 },
+    { 0x00009a54, 0x00000070, 0x00000050 },
+    { 0x00009a58, 0x00000191, 0x00000090 },
+    { 0x00009a5c, 0x000001d1, 0x00000151 },
+    { 0x00009a60, 0x00000011, 0x00000191 },
+    { 0x00009a64, 0x00000051, 0x000001d1 },
+    { 0x00009a68, 0x00000091, 0x00000011 },
+    { 0x00009a6c, 0x000001b8, 0x00000051 },
+    { 0x00009a70, 0x000001f8, 0x00000198 },
+    { 0x00009a74, 0x00000038, 0x000001d8 },
+    { 0x00009a78, 0x00000078, 0x00000018 },
+    { 0x00009a7c, 0x00000199, 0x00000058 },
+    { 0x00009a80, 0x000001d9, 0x00000098 },
+    { 0x00009a84, 0x00000019, 0x00000159 },
+    { 0x00009a88, 0x00000059, 0x00000199 },
+    { 0x00009a8c, 0x00000099, 0x000001d9 },
+    { 0x00009a90, 0x000000d9, 0x00000019 },
+    { 0x00009a94, 0x000000f9, 0x00000059 },
+    { 0x00009a98, 0x000000f9, 0x00000099 },
+    { 0x00009a9c, 0x000000f9, 0x000000d9 },
+    { 0x00009aa0, 0x000000f9, 0x000000f9 },
+    { 0x00009aa4, 0x000000f9, 0x000000f9 },
+    { 0x00009aa8, 0x000000f9, 0x000000f9 },
+    { 0x00009aac, 0x000000f9, 0x000000f9 },
+    { 0x00009ab0, 0x000000f9, 0x000000f9 },
+    { 0x00009ab4, 0x000000f9, 0x000000f9 },
+    { 0x00009ab8, 0x000000f9, 0x000000f9 },
+    { 0x00009abc, 0x000000f9, 0x000000f9 },
+    { 0x00009ac0, 0x000000f9, 0x000000f9 },
+    { 0x00009ac4, 0x000000f9, 0x000000f9 },
+    { 0x00009ac8, 0x000000f9, 0x000000f9 },
+    { 0x00009acc, 0x000000f9, 0x000000f9 },
+    { 0x00009ad0, 0x000000f9, 0x000000f9 },
+    { 0x00009ad4, 0x000000f9, 0x000000f9 },
+    { 0x00009ad8, 0x000000f9, 0x000000f9 },
+    { 0x00009adc, 0x000000f9, 0x000000f9 },
+    { 0x00009ae0, 0x000000f9, 0x000000f9 },
+    { 0x00009ae4, 0x000000f9, 0x000000f9 },
+    { 0x00009ae8, 0x000000f9, 0x000000f9 },
+    { 0x00009aec, 0x000000f9, 0x000000f9 },
+    { 0x00009af0, 0x000000f9, 0x000000f9 },
+    { 0x00009af4, 0x000000f9, 0x000000f9 },
+    { 0x00009af8, 0x000000f9, 0x000000f9 },
+    { 0x00009afc, 0x000000f9, 0x000000f9 },
+};
+
+static const u32 ar5416Bank1_9160[][2] = {
+    { 0x000098b0, 0x02108421 },
+    { 0x000098ec, 0x00000008 },
+};
+
+static const u32 ar5416Bank2_9160[][2] = {
+    { 0x000098b0, 0x0e73ff17 },
+    { 0x000098e0, 0x00000420 },
+};
+
+static const u32 ar5416Bank3_9160[][3] = {
+    { 0x000098f0, 0x01400018, 0x01c00018 },
+};
+
+static const u32 ar5416Bank6_9160[][3] = {
+
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x40ff0000, 0x40ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x004210a2, 0x004210a2 },
+    { 0x0000989c, 0x0014008f, 0x0014008f },
+    { 0x0000989c, 0x00c40003, 0x00c40003 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x0001805e, 0x0001805e },
+    { 0x0000989c, 0x0000c0ab, 0x0000c0ab },
+    { 0x0000989c, 0x000000f1, 0x000000f1 },
+    { 0x0000989c, 0x00002081, 0x00002081 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+static const u32 ar5416Bank6TPC_9160[][3] = {
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00000000, 0x00000000 },
+    { 0x0000989c, 0x00e00000, 0x00e00000 },
+    { 0x0000989c, 0x005e0000, 0x005e0000 },
+    { 0x0000989c, 0x00120000, 0x00120000 },
+    { 0x0000989c, 0x00620000, 0x00620000 },
+    { 0x0000989c, 0x00020000, 0x00020000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x40ff0000, 0x40ff0000 },
+    { 0x0000989c, 0x005f0000, 0x005f0000 },
+    { 0x0000989c, 0x00870000, 0x00870000 },
+    { 0x0000989c, 0x00f90000, 0x00f90000 },
+    { 0x0000989c, 0x007b0000, 0x007b0000 },
+    { 0x0000989c, 0x00ff0000, 0x00ff0000 },
+    { 0x0000989c, 0x00f50000, 0x00f50000 },
+    { 0x0000989c, 0x00dc0000, 0x00dc0000 },
+    { 0x0000989c, 0x00110000, 0x00110000 },
+    { 0x0000989c, 0x006100a8, 0x006100a8 },
+    { 0x0000989c, 0x00423022, 0x00423022 },
+    { 0x0000989c, 0x2014008f, 0x2014008f },
+    { 0x0000989c, 0x00c40002, 0x00c40002 },
+    { 0x0000989c, 0x003000f2, 0x003000f2 },
+    { 0x0000989c, 0x00440016, 0x00440016 },
+    { 0x0000989c, 0x00410040, 0x00410040 },
+    { 0x0000989c, 0x0001805e, 0x0001805e },
+    { 0x0000989c, 0x0000c0ab, 0x0000c0ab },
+    { 0x0000989c, 0x000000e1, 0x000000e1 },
+    { 0x0000989c, 0x00007080, 0x00007080 },
+    { 0x0000989c, 0x000000d4, 0x000000d4 },
+    { 0x000098d0, 0x0000000f, 0x0010000f },
+};
+
+static const u32 ar5416Bank7_9160[][2] = {
+    { 0x0000989c, 0x00000500 },
+    { 0x0000989c, 0x00000800 },
+    { 0x000098cc, 0x0000000e },
+};
+
+
+static u32 ar5416Addac_9160[][2] = {
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x000000c0 },
+    {0x0000989c,  0x00000018 },
+    {0x0000989c,  0x00000004 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x000000c0 },
+    {0x0000989c,  0x00000019 },
+    {0x0000989c,  0x00000004 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000004 },
+    {0x0000989c,  0x00000003 },
+    {0x0000989c,  0x00000008 },
+    {0x0000989c,  0x00000000 },
+    {0x000098cc,  0x00000000 },
+};
+
+
+static u32 ar5416Addac_91601_1[][2] = {
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x000000c0 },
+    {0x0000989c,  0x00000018 },
+    {0x0000989c,  0x00000004 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x000000c0 },
+    {0x0000989c,  0x00000019 },
+    {0x0000989c,  0x00000004 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x0000989c,  0x00000000 },
+    {0x000098cc,  0x00000000 },
+};
+
+
+
+static const u32 ar9280Modes_9280[][6] = {
+    { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+    { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+    { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+    { 0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000, 0x00014008 },
+    { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801080, 0x08400840, 0x06e006e0 },
+    { 0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b, 0x0988004f },
+    { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+    { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+    { 0x00009844, 0x1372161e, 0x1372161e, 0x137216a0, 0x137216a0, 0x137216a0 },
+    { 0x00009848, 0x00028566, 0x00028566, 0x00028563, 0x00028563, 0x00028563 },
+    { 0x0000a848, 0x00028566, 0x00028566, 0x00028563, 0x00028563, 0x00028563 },
+    { 0x00009850, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2 },
+    { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e },
+    { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e },
+    { 0x00009860, 0x00049d18, 0x00049d18, 0x00049d20, 0x00049d20, 0x00049d18 },
+    { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009868, 0x5ac64190, 0x5ac64190, 0x5ac64190, 0x5ac64190, 0x5ac64190 },
+    { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 },
+    { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 },
+    { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+    { 0x00009924, 0xd00a8a07, 0xd00a8a07, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d },
+    { 0x00009944, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010 },
+    { 0x00009960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
+    { 0x0000a960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
+    { 0x00009964, 0x00000210, 0x00000210, 0x00000210, 0x00000210, 0x00000210 },
+    { 0x0000c9b8, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a },
+    { 0x0000c9bc, 0x00000600, 0x00000600, 0x00000c00, 0x00000c00, 0x00000c00 },
+    { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
+    { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+    { 0x000099c8, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c },
+    { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+    { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+    { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x00009a00, 0x00008184, 0x00008184, 0x00000214, 0x00000214, 0x00000214 },
+    { 0x00009a04, 0x00008188, 0x00008188, 0x00000218, 0x00000218, 0x00000218 },
+    { 0x00009a08, 0x0000818c, 0x0000818c, 0x00000224, 0x00000224, 0x00000224 },
+    { 0x00009a0c, 0x00008190, 0x00008190, 0x00000228, 0x00000228, 0x00000228 },
+    { 0x00009a10, 0x00008194, 0x00008194, 0x0000022c, 0x0000022c, 0x0000022c },
+    { 0x00009a14, 0x00008200, 0x00008200, 0x00000230, 0x00000230, 0x00000230 },
+    { 0x00009a18, 0x00008204, 0x00008204, 0x000002a4, 0x000002a4, 0x000002a4 },
+    { 0x00009a1c, 0x00008208, 0x00008208, 0x000002a8, 0x000002a8, 0x000002a8 },
+    { 0x00009a20, 0x0000820c, 0x0000820c, 0x000002ac, 0x000002ac, 0x000002ac },
+    { 0x00009a24, 0x00008210, 0x00008210, 0x000002b0, 0x000002b0, 0x000002b0 },
+    { 0x00009a28, 0x00008214, 0x00008214, 0x000002b4, 0x000002b4, 0x000002b4 },
+    { 0x00009a2c, 0x00008280, 0x00008280, 0x000002b8, 0x000002b8, 0x000002b8 },
+    { 0x00009a30, 0x00008284, 0x00008284, 0x00000390, 0x00000390, 0x00000390 },
+    { 0x00009a34, 0x00008288, 0x00008288, 0x00000394, 0x00000394, 0x00000394 },
+    { 0x00009a38, 0x0000828c, 0x0000828c, 0x00000398, 0x00000398, 0x00000398 },
+    { 0x00009a3c, 0x00008290, 0x00008290, 0x00000334, 0x00000334, 0x00000334 },
+    { 0x00009a40, 0x00008300, 0x00008300, 0x00000338, 0x00000338, 0x00000338 },
+    { 0x00009a44, 0x00008304, 0x00008304, 0x000003ac, 0x000003ac, 0x000003ac },
+    { 0x00009a48, 0x00008308, 0x00008308, 0x000003b0, 0x000003b0, 0x000003b0 },
+    { 0x00009a4c, 0x0000830c, 0x0000830c, 0x000003b4, 0x000003b4, 0x000003b4 },
+    { 0x00009a50, 0x00008310, 0x00008310, 0x000003b8, 0x000003b8, 0x000003b8 },
+    { 0x00009a54, 0x00008314, 0x00008314, 0x000003a5, 0x000003a5, 0x000003a5 },
+    { 0x00009a58, 0x00008380, 0x00008380, 0x000003a9, 0x000003a9, 0x000003a9 },
+    { 0x00009a5c, 0x00008384, 0x00008384, 0x000003ad, 0x000003ad, 0x000003ad },
+    { 0x00009a60, 0x00008388, 0x00008388, 0x00008194, 0x00008194, 0x00008194 },
+    { 0x00009a64, 0x0000838c, 0x0000838c, 0x000081a0, 0x000081a0, 0x000081a0 },
+    { 0x00009a68, 0x00008390, 0x00008390, 0x0000820c, 0x0000820c, 0x0000820c },
+    { 0x00009a6c, 0x00008394, 0x00008394, 0x000081a8, 0x000081a8, 0x000081a8 },
+    { 0x00009a70, 0x0000a380, 0x0000a380, 0x00008284, 0x00008284, 0x00008284 },
+    { 0x00009a74, 0x0000a384, 0x0000a384, 0x00008288, 0x00008288, 0x00008288 },
+    { 0x00009a78, 0x0000a388, 0x0000a388, 0x00008224, 0x00008224, 0x00008224 },
+    { 0x00009a7c, 0x0000a38c, 0x0000a38c, 0x00008290, 0x00008290, 0x00008290 },
+    { 0x00009a80, 0x0000a390, 0x0000a390, 0x00008300, 0x00008300, 0x00008300 },
+    { 0x00009a84, 0x0000a394, 0x0000a394, 0x00008304, 0x00008304, 0x00008304 },
+    { 0x00009a88, 0x0000a780, 0x0000a780, 0x00008308, 0x00008308, 0x00008308 },
+    { 0x00009a8c, 0x0000a784, 0x0000a784, 0x0000830c, 0x0000830c, 0x0000830c },
+    { 0x00009a90, 0x0000a788, 0x0000a788, 0x00008380, 0x00008380, 0x00008380 },
+    { 0x00009a94, 0x0000a78c, 0x0000a78c, 0x00008384, 0x00008384, 0x00008384 },
+    { 0x00009a98, 0x0000a790, 0x0000a790, 0x00008700, 0x00008700, 0x00008700 },
+    { 0x00009a9c, 0x0000a794, 0x0000a794, 0x00008704, 0x00008704, 0x00008704 },
+    { 0x00009aa0, 0x0000ab84, 0x0000ab84, 0x00008708, 0x00008708, 0x00008708 },
+    { 0x00009aa4, 0x0000ab88, 0x0000ab88, 0x0000870c, 0x0000870c, 0x0000870c },
+    { 0x00009aa8, 0x0000ab8c, 0x0000ab8c, 0x00008780, 0x00008780, 0x00008780 },
+    { 0x00009aac, 0x0000ab90, 0x0000ab90, 0x00008784, 0x00008784, 0x00008784 },
+    { 0x00009ab0, 0x0000ab94, 0x0000ab94, 0x00008b00, 0x00008b00, 0x00008b00 },
+    { 0x00009ab4, 0x0000af80, 0x0000af80, 0x00008b04, 0x00008b04, 0x00008b04 },
+    { 0x00009ab8, 0x0000af84, 0x0000af84, 0x00008b08, 0x00008b08, 0x00008b08 },
+    { 0x00009abc, 0x0000af88, 0x0000af88, 0x00008b0c, 0x00008b0c, 0x00008b0c },
+    { 0x00009ac0, 0x0000af8c, 0x0000af8c, 0x00008b80, 0x00008b80, 0x00008b80 },
+    { 0x00009ac4, 0x0000af90, 0x0000af90, 0x00008b84, 0x00008b84, 0x00008b84 },
+    { 0x00009ac8, 0x0000af94, 0x0000af94, 0x00008b88, 0x00008b88, 0x00008b88 },
+    { 0x00009acc, 0x0000b380, 0x0000b380, 0x00008b8c, 0x00008b8c, 0x00008b8c },
+    { 0x00009ad0, 0x0000b384, 0x0000b384, 0x00008b90, 0x00008b90, 0x00008b90 },
+    { 0x00009ad4, 0x0000b388, 0x0000b388, 0x00008f80, 0x00008f80, 0x00008f80 },
+    { 0x00009ad8, 0x0000b38c, 0x0000b38c, 0x00008f84, 0x00008f84, 0x00008f84 },
+    { 0x00009adc, 0x0000b390, 0x0000b390, 0x00008f88, 0x00008f88, 0x00008f88 },
+    { 0x00009ae0, 0x0000b394, 0x0000b394, 0x00008f8c, 0x00008f8c, 0x00008f8c },
+    { 0x00009ae4, 0x0000b398, 0x0000b398, 0x00008f90, 0x00008f90, 0x00008f90 },
+    { 0x00009ae8, 0x0000b780, 0x0000b780, 0x0000930c, 0x0000930c, 0x0000930c },
+    { 0x00009aec, 0x0000b784, 0x0000b784, 0x00009310, 0x00009310, 0x00009310 },
+    { 0x00009af0, 0x0000b788, 0x0000b788, 0x00009384, 0x00009384, 0x00009384 },
+    { 0x00009af4, 0x0000b78c, 0x0000b78c, 0x00009388, 0x00009388, 0x00009388 },
+    { 0x00009af8, 0x0000b790, 0x0000b790, 0x00009324, 0x00009324, 0x00009324 },
+    { 0x00009afc, 0x0000b794, 0x0000b794, 0x00009704, 0x00009704, 0x00009704 },
+    { 0x00009b00, 0x0000b798, 0x0000b798, 0x000096a4, 0x000096a4, 0x000096a4 },
+    { 0x00009b04, 0x0000d784, 0x0000d784, 0x000096a8, 0x000096a8, 0x000096a8 },
+    { 0x00009b08, 0x0000d788, 0x0000d788, 0x00009710, 0x00009710, 0x00009710 },
+    { 0x00009b0c, 0x0000d78c, 0x0000d78c, 0x00009714, 0x00009714, 0x00009714 },
+    { 0x00009b10, 0x0000d790, 0x0000d790, 0x00009720, 0x00009720, 0x00009720 },
+    { 0x00009b14, 0x0000f780, 0x0000f780, 0x00009724, 0x00009724, 0x00009724 },
+    { 0x00009b18, 0x0000f784, 0x0000f784, 0x00009728, 0x00009728, 0x00009728 },
+    { 0x00009b1c, 0x0000f788, 0x0000f788, 0x0000972c, 0x0000972c, 0x0000972c },
+    { 0x00009b20, 0x0000f78c, 0x0000f78c, 0x000097a0, 0x000097a0, 0x000097a0 },
+    { 0x00009b24, 0x0000f790, 0x0000f790, 0x000097a4, 0x000097a4, 0x000097a4 },
+    { 0x00009b28, 0x0000f794, 0x0000f794, 0x000097a8, 0x000097a8, 0x000097a8 },
+    { 0x00009b2c, 0x0000f7a4, 0x0000f7a4, 0x000097b0, 0x000097b0, 0x000097b0 },
+    { 0x00009b30, 0x0000f7a8, 0x0000f7a8, 0x000097b4, 0x000097b4, 0x000097b4 },
+    { 0x00009b34, 0x0000f7ac, 0x0000f7ac, 0x000097b8, 0x000097b8, 0x000097b8 },
+    { 0x00009b38, 0x0000f7b0, 0x0000f7b0, 0x000097a5, 0x000097a5, 0x000097a5 },
+    { 0x00009b3c, 0x0000f7b4, 0x0000f7b4, 0x000097a9, 0x000097a9, 0x000097a9 },
+    { 0x00009b40, 0x0000f7a1, 0x0000f7a1, 0x000097ad, 0x000097ad, 0x000097ad },
+    { 0x00009b44, 0x0000f7a5, 0x0000f7a5, 0x000097b1, 0x000097b1, 0x000097b1 },
+    { 0x00009b48, 0x0000f7a9, 0x0000f7a9, 0x000097b5, 0x000097b5, 0x000097b5 },
+    { 0x00009b4c, 0x0000f7ad, 0x0000f7ad, 0x000097b9, 0x000097b9, 0x000097b9 },
+    { 0x00009b50, 0x0000f7b1, 0x0000f7b1, 0x000097c5, 0x000097c5, 0x000097c5 },
+    { 0x00009b54, 0x0000f7b5, 0x0000f7b5, 0x000097c9, 0x000097c9, 0x000097c9 },
+    { 0x00009b58, 0x0000f7c5, 0x0000f7c5, 0x000097d1, 0x000097d1, 0x000097d1 },
+    { 0x00009b5c, 0x0000f7c9, 0x0000f7c9, 0x000097d5, 0x000097d5, 0x000097d5 },
+    { 0x00009b60, 0x0000f7cd, 0x0000f7cd, 0x000097d9, 0x000097d9, 0x000097d9 },
+    { 0x00009b64, 0x0000f7d1, 0x0000f7d1, 0x000097c6, 0x000097c6, 0x000097c6 },
+    { 0x00009b68, 0x0000f7d5, 0x0000f7d5, 0x000097ca, 0x000097ca, 0x000097ca },
+    { 0x00009b6c, 0x0000f7c2, 0x0000f7c2, 0x000097ce, 0x000097ce, 0x000097ce },
+    { 0x00009b70, 0x0000f7c6, 0x0000f7c6, 0x000097d2, 0x000097d2, 0x000097d2 },
+    { 0x00009b74, 0x0000f7ca, 0x0000f7ca, 0x000097d6, 0x000097d6, 0x000097d6 },
+    { 0x00009b78, 0x0000f7ce, 0x0000f7ce, 0x000097c3, 0x000097c3, 0x000097c3 },
+    { 0x00009b7c, 0x0000f7d2, 0x0000f7d2, 0x000097c7, 0x000097c7, 0x000097c7 },
+    { 0x00009b80, 0x0000f7d6, 0x0000f7d6, 0x000097cb, 0x000097cb, 0x000097cb },
+    { 0x00009b84, 0x0000f7c3, 0x0000f7c3, 0x000097cf, 0x000097cf, 0x000097cf },
+    { 0x00009b88, 0x0000f7c7, 0x0000f7c7, 0x000097d7, 0x000097d7, 0x000097d7 },
+    { 0x00009b8c, 0x0000f7cb, 0x0000f7cb, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b90, 0x0000f7d3, 0x0000f7d3, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b94, 0x0000f7d7, 0x0000f7d7, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b98, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b9c, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bac, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bbc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bcc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bdc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bec, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bfc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x0000a204, 0x00000444, 0x00000444, 0x00000444, 0x00000444, 0x00000444 },
+    { 0x0000a208, 0x803e4788, 0x803e4788, 0x803e4788, 0x803e4788, 0x803e4788 },
+    { 0x0000a20c, 0x000c6019, 0x000c6019, 0x000c6019, 0x000c6019, 0x000c6019 },
+    { 0x0000b20c, 0x000c6019, 0x000c6019, 0x000c6019, 0x000c6019, 0x000c6019 },
+    { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
+    { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a274, 0x0a19c652, 0x0a19c652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
+    { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a304, 0x00003002, 0x00003002, 0x00003002, 0x00003002, 0x00003002 },
+    { 0x0000a308, 0x00006004, 0x00006004, 0x00008009, 0x00008009, 0x00008009 },
+    { 0x0000a30c, 0x0000a006, 0x0000a006, 0x0000b00b, 0x0000b00b, 0x0000b00b },
+    { 0x0000a310, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012 },
+    { 0x0000a314, 0x00011014, 0x00011014, 0x00012048, 0x00012048, 0x00012048 },
+    { 0x0000a318, 0x0001504a, 0x0001504a, 0x0001604a, 0x0001604a, 0x0001604a },
+    { 0x0000a31c, 0x0001904c, 0x0001904c, 0x0001a211, 0x0001a211, 0x0001a211 },
+    { 0x0000a320, 0x0001c04e, 0x0001c04e, 0x0001e213, 0x0001e213, 0x0001e213 },
+    { 0x0000a324, 0x00020092, 0x00020092, 0x0002121b, 0x0002121b, 0x0002121b },
+    { 0x0000a328, 0x0002410a, 0x0002410a, 0x00024412, 0x00024412, 0x00024412 },
+    { 0x0000a32c, 0x0002710c, 0x0002710c, 0x00028414, 0x00028414, 0x00028414 },
+    { 0x0000a330, 0x0002b18b, 0x0002b18b, 0x0002b44a, 0x0002b44a, 0x0002b44a },
+    { 0x0000a334, 0x0002e1cc, 0x0002e1cc, 0x00030649, 0x00030649, 0x00030649 },
+    { 0x0000a338, 0x000321ec, 0x000321ec, 0x0003364b, 0x0003364b, 0x0003364b },
+    { 0x0000a33c, 0x000321ec, 0x000321ec, 0x00038a49, 0x00038a49, 0x00038a49 },
+    { 0x0000a340, 0x000321ec, 0x000321ec, 0x0003be48, 0x0003be48, 0x0003be48 },
+    { 0x0000a344, 0x000321ec, 0x000321ec, 0x0003ee4a, 0x0003ee4a, 0x0003ee4a },
+    { 0x0000a348, 0x000321ec, 0x000321ec, 0x00042e88, 0x00042e88, 0x00042e88 },
+    { 0x0000a34c, 0x000321ec, 0x000321ec, 0x00046e8a, 0x00046e8a, 0x00046e8a },
+    { 0x0000a350, 0x000321ec, 0x000321ec, 0x00049ec9, 0x00049ec9, 0x00049ec9 },
+    { 0x0000a354, 0x000321ec, 0x000321ec, 0x0004bf42, 0x0004bf42, 0x0004bf42 },
+    { 0x0000784c, 0x0e4f048c, 0x0e4f048c, 0x0e4d048c, 0x0e4d048c, 0x0e4d048c },
+    { 0x00007854, 0x12031828, 0x12031828, 0x12035828, 0x12035828, 0x12035828 },
+    { 0x00007870, 0x807ec400, 0x807ec400, 0x807ec000, 0x807ec000, 0x807ec000 },
+    { 0x0000788c, 0x00010000, 0x00010000, 0x00110000, 0x00110000, 0x00110000 },
+};
+
+static const u32 ar9280Common_9280[][2] = {
+    { 0x0000000c, 0x00000000 },
+    { 0x00000030, 0x00020015 },
+    { 0x00000034, 0x00000005 },
+    { 0x00000040, 0x00000000 },
+    { 0x00000044, 0x00000008 },
+    { 0x00000048, 0x00000008 },
+    { 0x0000004c, 0x00000010 },
+    { 0x00000050, 0x00000000 },
+    { 0x00000054, 0x0000001f },
+    { 0x00000800, 0x00000000 },
+    { 0x00000804, 0x00000000 },
+    { 0x00000808, 0x00000000 },
+    { 0x0000080c, 0x00000000 },
+    { 0x00000810, 0x00000000 },
+    { 0x00000814, 0x00000000 },
+    { 0x00000818, 0x00000000 },
+    { 0x0000081c, 0x00000000 },
+    { 0x00000820, 0x00000000 },
+    { 0x00000824, 0x00000000 },
+    { 0x00001040, 0x002ffc0f },
+    { 0x00001044, 0x002ffc0f },
+    { 0x00001048, 0x002ffc0f },
+    { 0x0000104c, 0x002ffc0f },
+    { 0x00001050, 0x002ffc0f },
+    { 0x00001054, 0x002ffc0f },
+    { 0x00001058, 0x002ffc0f },
+    { 0x0000105c, 0x002ffc0f },
+    { 0x00001060, 0x002ffc0f },
+    { 0x00001064, 0x002ffc0f },
+    { 0x00001230, 0x00000000 },
+    { 0x00001270, 0x00000000 },
+    { 0x00001038, 0x00000000 },
+    { 0x00001078, 0x00000000 },
+    { 0x000010b8, 0x00000000 },
+    { 0x000010f8, 0x00000000 },
+    { 0x00001138, 0x00000000 },
+    { 0x00001178, 0x00000000 },
+    { 0x000011b8, 0x00000000 },
+    { 0x000011f8, 0x00000000 },
+    { 0x00001238, 0x00000000 },
+    { 0x00001278, 0x00000000 },
+    { 0x000012b8, 0x00000000 },
+    { 0x000012f8, 0x00000000 },
+    { 0x00001338, 0x00000000 },
+    { 0x00001378, 0x00000000 },
+    { 0x000013b8, 0x00000000 },
+    { 0x000013f8, 0x00000000 },
+    { 0x00001438, 0x00000000 },
+    { 0x00001478, 0x00000000 },
+    { 0x000014b8, 0x00000000 },
+    { 0x000014f8, 0x00000000 },
+    { 0x00001538, 0x00000000 },
+    { 0x00001578, 0x00000000 },
+    { 0x000015b8, 0x00000000 },
+    { 0x000015f8, 0x00000000 },
+    { 0x00001638, 0x00000000 },
+    { 0x00001678, 0x00000000 },
+    { 0x000016b8, 0x00000000 },
+    { 0x000016f8, 0x00000000 },
+    { 0x00001738, 0x00000000 },
+    { 0x00001778, 0x00000000 },
+    { 0x000017b8, 0x00000000 },
+    { 0x000017f8, 0x00000000 },
+    { 0x0000103c, 0x00000000 },
+    { 0x0000107c, 0x00000000 },
+    { 0x000010bc, 0x00000000 },
+    { 0x000010fc, 0x00000000 },
+    { 0x0000113c, 0x00000000 },
+    { 0x0000117c, 0x00000000 },
+    { 0x000011bc, 0x00000000 },
+    { 0x000011fc, 0x00000000 },
+    { 0x0000123c, 0x00000000 },
+    { 0x0000127c, 0x00000000 },
+    { 0x000012bc, 0x00000000 },
+    { 0x000012fc, 0x00000000 },
+    { 0x0000133c, 0x00000000 },
+    { 0x0000137c, 0x00000000 },
+    { 0x000013bc, 0x00000000 },
+    { 0x000013fc, 0x00000000 },
+    { 0x0000143c, 0x00000000 },
+    { 0x0000147c, 0x00000000 },
+    { 0x00004030, 0x00000002 },
+    { 0x0000403c, 0x00000002 },
+    { 0x00004024, 0x0000001f },
+    { 0x00007010, 0x00000033 },
+    { 0x00007038, 0x000004c2 },
+    { 0x00008004, 0x00000000 },
+    { 0x00008008, 0x00000000 },
+    { 0x0000800c, 0x00000000 },
+    { 0x00008018, 0x00000700 },
+    { 0x00008020, 0x00000000 },
+    { 0x00008038, 0x00000000 },
+    { 0x0000803c, 0x00000000 },
+    { 0x00008048, 0x40000000 },
+    { 0x00008054, 0x00000000 },
+    { 0x00008058, 0x00000000 },
+    { 0x0000805c, 0x000fc78f },
+    { 0x00008060, 0x0000000f },
+    { 0x00008064, 0x00000000 },
+    { 0x00008070, 0x00000000 },
+    { 0x000080c0, 0x2a82301a },
+    { 0x000080c4, 0x05dc01e0 },
+    { 0x000080c8, 0x1f402710 },
+    { 0x000080cc, 0x01f40000 },
+    { 0x000080d0, 0x00001e00 },
+    { 0x000080d4, 0x00000000 },
+    { 0x000080d8, 0x00400000 },
+    { 0x000080e0, 0xffffffff },
+    { 0x000080e4, 0x0000ffff },
+    { 0x000080e8, 0x003f3f3f },
+    { 0x000080ec, 0x00000000 },
+    { 0x000080f0, 0x00000000 },
+    { 0x000080f4, 0x00000000 },
+    { 0x000080f8, 0x00000000 },
+    { 0x000080fc, 0x00020000 },
+    { 0x00008100, 0x00020000 },
+    { 0x00008104, 0x00000001 },
+    { 0x00008108, 0x00000052 },
+    { 0x0000810c, 0x00000000 },
+    { 0x00008110, 0x00000168 },
+    { 0x00008118, 0x000100aa },
+    { 0x0000811c, 0x00003210 },
+    { 0x00008120, 0x08f04800 },
+    { 0x00008124, 0x00000000 },
+    { 0x00008128, 0x00000000 },
+    { 0x0000812c, 0x00000000 },
+    { 0x00008130, 0x00000000 },
+    { 0x00008134, 0x00000000 },
+    { 0x00008138, 0x00000000 },
+    { 0x0000813c, 0x00000000 },
+    { 0x00008144, 0x00000000 },
+    { 0x00008168, 0x00000000 },
+    { 0x0000816c, 0x00000000 },
+    { 0x00008170, 0x32143320 },
+    { 0x00008174, 0xfaa4fa50 },
+    { 0x00008178, 0x00000100 },
+    { 0x0000817c, 0x00000000 },
+    { 0x000081c4, 0x00000000 },
+    { 0x000081d0, 0x00003210 },
+    { 0x000081ec, 0x00000000 },
+    { 0x000081f0, 0x00000000 },
+    { 0x000081f4, 0x00000000 },
+    { 0x000081f8, 0x00000000 },
+    { 0x000081fc, 0x00000000 },
+    { 0x00008200, 0x00000000 },
+    { 0x00008204, 0x00000000 },
+    { 0x00008208, 0x00000000 },
+    { 0x0000820c, 0x00000000 },
+    { 0x00008210, 0x00000000 },
+    { 0x00008214, 0x00000000 },
+    { 0x00008218, 0x00000000 },
+    { 0x0000821c, 0x00000000 },
+    { 0x00008220, 0x00000000 },
+    { 0x00008224, 0x00000000 },
+    { 0x00008228, 0x00000000 },
+    { 0x0000822c, 0x00000000 },
+    { 0x00008230, 0x00000000 },
+    { 0x00008234, 0x00000000 },
+    { 0x00008238, 0x00000000 },
+    { 0x0000823c, 0x00000000 },
+    { 0x00008240, 0x00100000 },
+    { 0x00008244, 0x0010f400 },
+    { 0x00008248, 0x00000100 },
+    { 0x0000824c, 0x0001e800 },
+    { 0x00008250, 0x00000000 },
+    { 0x00008254, 0x00000000 },
+    { 0x00008258, 0x00000000 },
+    { 0x0000825c, 0x400000ff },
+    { 0x00008260, 0x00080922 },
+    { 0x00008270, 0x00000000 },
+    { 0x00008274, 0x40000000 },
+    { 0x00008278, 0x003e4180 },
+    { 0x0000827c, 0x00000000 },
+    { 0x00008284, 0x0000002c },
+    { 0x00008288, 0x0000002c },
+    { 0x0000828c, 0x00000000 },
+    { 0x00008294, 0x00000000 },
+    { 0x00008298, 0x00000000 },
+    { 0x00008300, 0x00000000 },
+    { 0x00008304, 0x00000000 },
+    { 0x00008308, 0x00000000 },
+    { 0x0000830c, 0x00000000 },
+    { 0x00008310, 0x00000000 },
+    { 0x00008314, 0x00000000 },
+    { 0x00008318, 0x00000000 },
+    { 0x00008328, 0x00000000 },
+    { 0x0000832c, 0x00000007 },
+    { 0x00008330, 0x00000302 },
+    { 0x00008334, 0x00000e00 },
+    { 0x00008338, 0x00000000 },
+    { 0x0000833c, 0x00000000 },
+    { 0x00008340, 0x000107ff },
+    { 0x00008344, 0x00000000 },
+    { 0x00009808, 0x00000000 },
+    { 0x0000980c, 0xaf268e30 },
+    { 0x00009810, 0xfd14e000 },
+    { 0x00009814, 0x9c0a9f6b },
+    { 0x0000981c, 0x00000000 },
+    { 0x0000982c, 0x0000a000 },
+    { 0x00009830, 0x00000000 },
+    { 0x0000983c, 0x00200400 },
+    { 0x00009840, 0x206a01ae },
+    { 0x0000984c, 0x0040233c },
+    { 0x0000a84c, 0x0040233c },
+    { 0x00009854, 0x00000044 },
+    { 0x00009900, 0x00000000 },
+    { 0x00009904, 0x00000000 },
+    { 0x00009908, 0x00000000 },
+    { 0x0000990c, 0x00000000 },
+    { 0x0000991c, 0x10000fff },
+    { 0x00009920, 0x04900000 },
+    { 0x0000a920, 0x04900000 },
+    { 0x00009928, 0x00000001 },
+    { 0x0000992c, 0x00000004 },
+    { 0x00009934, 0x1e1f2022 },
+    { 0x00009938, 0x0a0b0c0d },
+    { 0x0000993c, 0x00000000 },
+    { 0x00009948, 0x9280c00a },
+    { 0x0000994c, 0x00020028 },
+    { 0x00009954, 0xe250a51e },
+    { 0x00009958, 0x3388ffff },
+    { 0x00009940, 0x00781204 },
+    { 0x0000c95c, 0x004b6a8e },
+    { 0x0000c968, 0x000003ce },
+    { 0x00009970, 0x190fb514 },
+    { 0x00009974, 0x00000000 },
+    { 0x00009978, 0x00000001 },
+    { 0x0000997c, 0x00000000 },
+    { 0x00009980, 0x00000000 },
+    { 0x00009984, 0x00000000 },
+    { 0x00009988, 0x00000000 },
+    { 0x0000998c, 0x00000000 },
+    { 0x00009990, 0x00000000 },
+    { 0x00009994, 0x00000000 },
+    { 0x00009998, 0x00000000 },
+    { 0x0000999c, 0x00000000 },
+    { 0x000099a0, 0x00000000 },
+    { 0x000099a4, 0x00000001 },
+    { 0x000099a8, 0x201fff00 },
+    { 0x000099ac, 0x006f00c4 },
+    { 0x000099b0, 0x03051000 },
+    { 0x000099b4, 0x00000820 },
+    { 0x000099dc, 0x00000000 },
+    { 0x000099e0, 0x00000000 },
+    { 0x000099e4, 0xaaaaaaaa },
+    { 0x000099e8, 0x3c466478 },
+    { 0x000099ec, 0x0cc80caa },
+    { 0x000099fc, 0x00001042 },
+    { 0x0000a210, 0x4080a333 },
+    { 0x0000a214, 0x40206c10 },
+    { 0x0000a218, 0x009c4060 },
+    { 0x0000a220, 0x01834061 },
+    { 0x0000a224, 0x00000400 },
+    { 0x0000a228, 0x000003b5 },
+    { 0x0000a22c, 0x23277200 },
+    { 0x0000a234, 0x20202020 },
+    { 0x0000a238, 0x20202020 },
+    { 0x0000a23c, 0x13c889af },
+    { 0x0000a240, 0x38490a20 },
+    { 0x0000a244, 0x00007bb6 },
+    { 0x0000a248, 0x0fff3ffc },
+    { 0x0000a24c, 0x00000001 },
+    { 0x0000a250, 0x001da000 },
+    { 0x0000a254, 0x00000000 },
+    { 0x0000a258, 0x0cdbd380 },
+    { 0x0000a25c, 0x0f0f0f01 },
+    { 0x0000a260, 0xdfa91f01 },
+    { 0x0000a268, 0x00000000 },
+    { 0x0000a26c, 0x0ebae9c6 },
+    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000d270, 0x00820820 },
+    { 0x0000a278, 0x1ce739ce },
+    { 0x0000a27c, 0x050701ce },
+    { 0x0000a358, 0x7999aa0f },
+    { 0x0000d35c, 0x07ffffef },
+    { 0x0000d360, 0x0fffffe7 },
+    { 0x0000d364, 0x17ffffe5 },
+    { 0x0000d368, 0x1fffffe4 },
+    { 0x0000d36c, 0x37ffffe3 },
+    { 0x0000d370, 0x3fffffe3 },
+    { 0x0000d374, 0x57ffffe3 },
+    { 0x0000d378, 0x5fffffe2 },
+    { 0x0000d37c, 0x7fffffe2 },
+    { 0x0000d380, 0x7f3c7bba },
+    { 0x0000d384, 0xf3307ff0 },
+    { 0x0000a388, 0x0c000000 },
+    { 0x0000a38c, 0x20202020 },
+    { 0x0000a390, 0x20202020 },
+    { 0x0000a394, 0x1ce739ce },
+    { 0x0000a398, 0x000001ce },
+    { 0x0000a39c, 0x00000001 },
+    { 0x0000a3a0, 0x00000000 },
+    { 0x0000a3a4, 0x00000000 },
+    { 0x0000a3a8, 0x00000000 },
+    { 0x0000a3ac, 0x00000000 },
+    { 0x0000a3b0, 0x00000000 },
+    { 0x0000a3b4, 0x00000000 },
+    { 0x0000a3b8, 0x00000000 },
+    { 0x0000a3bc, 0x00000000 },
+    { 0x0000a3c0, 0x00000000 },
+    { 0x0000a3c4, 0x00000000 },
+    { 0x0000a3c8, 0x00000246 },
+    { 0x0000a3cc, 0x20202020 },
+    { 0x0000a3d0, 0x20202020 },
+    { 0x0000a3d4, 0x20202020 },
+    { 0x0000a3dc, 0x1ce739ce },
+    { 0x0000a3e0, 0x000001ce },
+    { 0x0000a3e4, 0x00000000 },
+    { 0x0000a3e8, 0x18c43433 },
+    { 0x0000a3ec, 0x00f38081 },
+    { 0x00007800, 0x00040000 },
+    { 0x00007804, 0xdb005012 },
+    { 0x00007808, 0x04924914 },
+    { 0x0000780c, 0x21084210 },
+    { 0x00007810, 0x6d801300 },
+    { 0x00007814, 0x0019beff },
+    { 0x00007818, 0x07e40000 },
+    { 0x0000781c, 0x00492000 },
+    { 0x00007820, 0x92492480 },
+    { 0x00007824, 0x00040000 },
+    { 0x00007828, 0xdb005012 },
+    { 0x0000782c, 0x04924914 },
+    { 0x00007830, 0x21084210 },
+    { 0x00007834, 0x6d801300 },
+    { 0x00007838, 0x0019beff },
+    { 0x0000783c, 0x07e40000 },
+    { 0x00007840, 0x00492000 },
+    { 0x00007844, 0x92492480 },
+    { 0x00007848, 0x00120000 },
+    { 0x00007850, 0x54214514 },
+    { 0x00007858, 0x92592692 },
+    { 0x00007860, 0x52802000 },
+    { 0x00007864, 0x0a8e370e },
+    { 0x00007868, 0xc0102850 },
+    { 0x0000786c, 0x812d4000 },
+    { 0x00007874, 0x001b6db0 },
+    { 0x00007878, 0x00376b63 },
+    { 0x0000787c, 0x06db6db6 },
+    { 0x00007880, 0x006d8000 },
+    { 0x00007884, 0xffeffffe },
+    { 0x00007888, 0xffeffffe },
+    { 0x00007890, 0x00060aeb },
+    { 0x00007894, 0x5a108000 },
+    { 0x00007898, 0x2a850160 },
+};
+
+
+
+
+static const u32 ar9280Modes_9280_2[][6] = {
+    { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+    { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+    { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+    { 0x000010f0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000008 },
+    { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
+    { 0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b, 0x0988004f },
+    { 0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440, 0x00006880 },
+    { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+    { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+    { 0x00009840, 0x206a012e, 0x206a012e, 0x206a022e, 0x206a022e, 0x206a022e },
+    { 0x00009844, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0, 0x037216a0 },
+    { 0x00009848, 0x00001066, 0x00001066, 0x00001063, 0x00001063, 0x00001063 },
+    { 0x0000a848, 0x00001066, 0x00001066, 0x00001063, 0x00001063, 0x00001063 },
+    { 0x00009850, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2 },
+    { 0x00009858, 0x7ec84d2e, 0x7ec84d2e, 0x7ec88d2e, 0x7ec88d2e, 0x7ec88d2e },
+    { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e },
+    { 0x00009860, 0x00048d18, 0x00048d18, 0x00048d20, 0x00048d20, 0x00048d18 },
+    { 0x0000c864, 0x0000fe00, 0x0000fe00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009868, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 },
+    { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 },
+    { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 },
+    { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+    { 0x00009924, 0xd00a8a07, 0xd00a8a07, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d },
+    { 0x00009944, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010 },
+    { 0x00009960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
+    { 0x0000a960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
+    { 0x00009964, 0x00000210, 0x00000210, 0x00000210, 0x00000210, 0x00000210 },
+    { 0x0000c9b8, 0x0000000f, 0x0000000f, 0x0000001c, 0x0000001c, 0x0000001c },
+    { 0x0000c9bc, 0x00000600, 0x00000600, 0x00000c00, 0x00000c00, 0x00000c00 },
+    { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
+    { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+    { 0x000099c8, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329 },
+    { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+    { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+    { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x00009a00, 0x00008184, 0x00008184, 0x00000290, 0x00000290, 0x00000290 },
+    { 0x00009a04, 0x00008188, 0x00008188, 0x00000300, 0x00000300, 0x00000300 },
+    { 0x00009a08, 0x0000818c, 0x0000818c, 0x00000304, 0x00000304, 0x00000304 },
+    { 0x00009a0c, 0x00008190, 0x00008190, 0x00000308, 0x00000308, 0x00000308 },
+    { 0x00009a10, 0x00008194, 0x00008194, 0x0000030c, 0x0000030c, 0x0000030c },
+    { 0x00009a14, 0x00008200, 0x00008200, 0x00008000, 0x00008000, 0x00008000 },
+    { 0x00009a18, 0x00008204, 0x00008204, 0x00008004, 0x00008004, 0x00008004 },
+    { 0x00009a1c, 0x00008208, 0x00008208, 0x00008008, 0x00008008, 0x00008008 },
+    { 0x00009a20, 0x0000820c, 0x0000820c, 0x0000800c, 0x0000800c, 0x0000800c },
+    { 0x00009a24, 0x00008210, 0x00008210, 0x00008080, 0x00008080, 0x00008080 },
+    { 0x00009a28, 0x00008214, 0x00008214, 0x00008084, 0x00008084, 0x00008084 },
+    { 0x00009a2c, 0x00008280, 0x00008280, 0x00008088, 0x00008088, 0x00008088 },
+    { 0x00009a30, 0x00008284, 0x00008284, 0x0000808c, 0x0000808c, 0x0000808c },
+    { 0x00009a34, 0x00008288, 0x00008288, 0x00008100, 0x00008100, 0x00008100 },
+    { 0x00009a38, 0x0000828c, 0x0000828c, 0x00008104, 0x00008104, 0x00008104 },
+    { 0x00009a3c, 0x00008290, 0x00008290, 0x00008108, 0x00008108, 0x00008108 },
+    { 0x00009a40, 0x00008300, 0x00008300, 0x0000810c, 0x0000810c, 0x0000810c },
+    { 0x00009a44, 0x00008304, 0x00008304, 0x00008110, 0x00008110, 0x00008110 },
+    { 0x00009a48, 0x00008308, 0x00008308, 0x00008114, 0x00008114, 0x00008114 },
+    { 0x00009a4c, 0x0000830c, 0x0000830c, 0x00008180, 0x00008180, 0x00008180 },
+    { 0x00009a50, 0x00008310, 0x00008310, 0x00008184, 0x00008184, 0x00008184 },
+    { 0x00009a54, 0x00008314, 0x00008314, 0x00008188, 0x00008188, 0x00008188 },
+    { 0x00009a58, 0x00008380, 0x00008380, 0x0000818c, 0x0000818c, 0x0000818c },
+    { 0x00009a5c, 0x00008384, 0x00008384, 0x00008190, 0x00008190, 0x00008190 },
+    { 0x00009a60, 0x00008388, 0x00008388, 0x00008194, 0x00008194, 0x00008194 },
+    { 0x00009a64, 0x0000838c, 0x0000838c, 0x000081a0, 0x000081a0, 0x000081a0 },
+    { 0x00009a68, 0x00008390, 0x00008390, 0x0000820c, 0x0000820c, 0x0000820c },
+    { 0x00009a6c, 0x00008394, 0x00008394, 0x000081a8, 0x000081a8, 0x000081a8 },
+    { 0x00009a70, 0x0000a380, 0x0000a380, 0x00008284, 0x00008284, 0x00008284 },
+    { 0x00009a74, 0x0000a384, 0x0000a384, 0x00008288, 0x00008288, 0x00008288 },
+    { 0x00009a78, 0x0000a388, 0x0000a388, 0x00008224, 0x00008224, 0x00008224 },
+    { 0x00009a7c, 0x0000a38c, 0x0000a38c, 0x00008290, 0x00008290, 0x00008290 },
+    { 0x00009a80, 0x0000a390, 0x0000a390, 0x00008300, 0x00008300, 0x00008300 },
+    { 0x00009a84, 0x0000a394, 0x0000a394, 0x00008304, 0x00008304, 0x00008304 },
+    { 0x00009a88, 0x0000a780, 0x0000a780, 0x00008308, 0x00008308, 0x00008308 },
+    { 0x00009a8c, 0x0000a784, 0x0000a784, 0x0000830c, 0x0000830c, 0x0000830c },
+    { 0x00009a90, 0x0000a788, 0x0000a788, 0x00008380, 0x00008380, 0x00008380 },
+    { 0x00009a94, 0x0000a78c, 0x0000a78c, 0x00008384, 0x00008384, 0x00008384 },
+    { 0x00009a98, 0x0000a790, 0x0000a790, 0x00008700, 0x00008700, 0x00008700 },
+    { 0x00009a9c, 0x0000a794, 0x0000a794, 0x00008704, 0x00008704, 0x00008704 },
+    { 0x00009aa0, 0x0000ab84, 0x0000ab84, 0x00008708, 0x00008708, 0x00008708 },
+    { 0x00009aa4, 0x0000ab88, 0x0000ab88, 0x0000870c, 0x0000870c, 0x0000870c },
+    { 0x00009aa8, 0x0000ab8c, 0x0000ab8c, 0x00008780, 0x00008780, 0x00008780 },
+    { 0x00009aac, 0x0000ab90, 0x0000ab90, 0x00008784, 0x00008784, 0x00008784 },
+    { 0x00009ab0, 0x0000ab94, 0x0000ab94, 0x00008b00, 0x00008b00, 0x00008b00 },
+    { 0x00009ab4, 0x0000af80, 0x0000af80, 0x00008b04, 0x00008b04, 0x00008b04 },
+    { 0x00009ab8, 0x0000af84, 0x0000af84, 0x00008b08, 0x00008b08, 0x00008b08 },
+    { 0x00009abc, 0x0000af88, 0x0000af88, 0x00008b0c, 0x00008b0c, 0x00008b0c },
+    { 0x00009ac0, 0x0000af8c, 0x0000af8c, 0x00008b80, 0x00008b80, 0x00008b80 },
+    { 0x00009ac4, 0x0000af90, 0x0000af90, 0x00008b84, 0x00008b84, 0x00008b84 },
+    { 0x00009ac8, 0x0000af94, 0x0000af94, 0x00008b88, 0x00008b88, 0x00008b88 },
+    { 0x00009acc, 0x0000b380, 0x0000b380, 0x00008b8c, 0x00008b8c, 0x00008b8c },
+    { 0x00009ad0, 0x0000b384, 0x0000b384, 0x00008b90, 0x00008b90, 0x00008b90 },
+    { 0x00009ad4, 0x0000b388, 0x0000b388, 0x00008f80, 0x00008f80, 0x00008f80 },
+    { 0x00009ad8, 0x0000b38c, 0x0000b38c, 0x00008f84, 0x00008f84, 0x00008f84 },
+    { 0x00009adc, 0x0000b390, 0x0000b390, 0x00008f88, 0x00008f88, 0x00008f88 },
+    { 0x00009ae0, 0x0000b394, 0x0000b394, 0x00008f8c, 0x00008f8c, 0x00008f8c },
+    { 0x00009ae4, 0x0000b398, 0x0000b398, 0x00008f90, 0x00008f90, 0x00008f90 },
+    { 0x00009ae8, 0x0000b780, 0x0000b780, 0x0000930c, 0x0000930c, 0x0000930c },
+    { 0x00009aec, 0x0000b784, 0x0000b784, 0x00009310, 0x00009310, 0x00009310 },
+    { 0x00009af0, 0x0000b788, 0x0000b788, 0x00009384, 0x00009384, 0x00009384 },
+    { 0x00009af4, 0x0000b78c, 0x0000b78c, 0x00009388, 0x00009388, 0x00009388 },
+    { 0x00009af8, 0x0000b790, 0x0000b790, 0x00009324, 0x00009324, 0x00009324 },
+    { 0x00009afc, 0x0000b794, 0x0000b794, 0x00009704, 0x00009704, 0x00009704 },
+    { 0x00009b00, 0x0000b798, 0x0000b798, 0x000096a4, 0x000096a4, 0x000096a4 },
+    { 0x00009b04, 0x0000d784, 0x0000d784, 0x000096a8, 0x000096a8, 0x000096a8 },
+    { 0x00009b08, 0x0000d788, 0x0000d788, 0x00009710, 0x00009710, 0x00009710 },
+    { 0x00009b0c, 0x0000d78c, 0x0000d78c, 0x00009714, 0x00009714, 0x00009714 },
+    { 0x00009b10, 0x0000d790, 0x0000d790, 0x00009720, 0x00009720, 0x00009720 },
+    { 0x00009b14, 0x0000f780, 0x0000f780, 0x00009724, 0x00009724, 0x00009724 },
+    { 0x00009b18, 0x0000f784, 0x0000f784, 0x00009728, 0x00009728, 0x00009728 },
+    { 0x00009b1c, 0x0000f788, 0x0000f788, 0x0000972c, 0x0000972c, 0x0000972c },
+    { 0x00009b20, 0x0000f78c, 0x0000f78c, 0x000097a0, 0x000097a0, 0x000097a0 },
+    { 0x00009b24, 0x0000f790, 0x0000f790, 0x000097a4, 0x000097a4, 0x000097a4 },
+    { 0x00009b28, 0x0000f794, 0x0000f794, 0x000097a8, 0x000097a8, 0x000097a8 },
+    { 0x00009b2c, 0x0000f7a4, 0x0000f7a4, 0x000097b0, 0x000097b0, 0x000097b0 },
+    { 0x00009b30, 0x0000f7a8, 0x0000f7a8, 0x000097b4, 0x000097b4, 0x000097b4 },
+    { 0x00009b34, 0x0000f7ac, 0x0000f7ac, 0x000097b8, 0x000097b8, 0x000097b8 },
+    { 0x00009b38, 0x0000f7b0, 0x0000f7b0, 0x000097a5, 0x000097a5, 0x000097a5 },
+    { 0x00009b3c, 0x0000f7b4, 0x0000f7b4, 0x000097a9, 0x000097a9, 0x000097a9 },
+    { 0x00009b40, 0x0000f7a1, 0x0000f7a1, 0x000097ad, 0x000097ad, 0x000097ad },
+    { 0x00009b44, 0x0000f7a5, 0x0000f7a5, 0x000097b1, 0x000097b1, 0x000097b1 },
+    { 0x00009b48, 0x0000f7a9, 0x0000f7a9, 0x000097b5, 0x000097b5, 0x000097b5 },
+    { 0x00009b4c, 0x0000f7ad, 0x0000f7ad, 0x000097b9, 0x000097b9, 0x000097b9 },
+    { 0x00009b50, 0x0000f7b1, 0x0000f7b1, 0x000097c5, 0x000097c5, 0x000097c5 },
+    { 0x00009b54, 0x0000f7b5, 0x0000f7b5, 0x000097c9, 0x000097c9, 0x000097c9 },
+    { 0x00009b58, 0x0000f7c5, 0x0000f7c5, 0x000097d1, 0x000097d1, 0x000097d1 },
+    { 0x00009b5c, 0x0000f7c9, 0x0000f7c9, 0x000097d5, 0x000097d5, 0x000097d5 },
+    { 0x00009b60, 0x0000f7cd, 0x0000f7cd, 0x000097d9, 0x000097d9, 0x000097d9 },
+    { 0x00009b64, 0x0000f7d1, 0x0000f7d1, 0x000097c6, 0x000097c6, 0x000097c6 },
+    { 0x00009b68, 0x0000f7d5, 0x0000f7d5, 0x000097ca, 0x000097ca, 0x000097ca },
+    { 0x00009b6c, 0x0000f7c2, 0x0000f7c2, 0x000097ce, 0x000097ce, 0x000097ce },
+    { 0x00009b70, 0x0000f7c6, 0x0000f7c6, 0x000097d2, 0x000097d2, 0x000097d2 },
+    { 0x00009b74, 0x0000f7ca, 0x0000f7ca, 0x000097d6, 0x000097d6, 0x000097d6 },
+    { 0x00009b78, 0x0000f7ce, 0x0000f7ce, 0x000097c3, 0x000097c3, 0x000097c3 },
+    { 0x00009b7c, 0x0000f7d2, 0x0000f7d2, 0x000097c7, 0x000097c7, 0x000097c7 },
+    { 0x00009b80, 0x0000f7d6, 0x0000f7d6, 0x000097cb, 0x000097cb, 0x000097cb },
+    { 0x00009b84, 0x0000f7c3, 0x0000f7c3, 0x000097cf, 0x000097cf, 0x000097cf },
+    { 0x00009b88, 0x0000f7c7, 0x0000f7c7, 0x000097d7, 0x000097d7, 0x000097d7 },
+    { 0x00009b8c, 0x0000f7cb, 0x0000f7cb, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b90, 0x0000f7d3, 0x0000f7d3, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b94, 0x0000f7d7, 0x0000f7d7, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b98, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009b9c, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009ba8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bac, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bb8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bbc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bc8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bcc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bd8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bdc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009be8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bec, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bf8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x00009bfc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db },
+    { 0x0000a204, 0x00000444, 0x00000444, 0x00000444, 0x00000444, 0x00000444 },
+    { 0x0000a208, 0x803e4788, 0x803e4788, 0x803e4788, 0x803e4788, 0x803e4788 },
+    { 0x0000a20c, 0x00000014, 0x00000014, 0x0001f019, 0x0001f019, 0x0001f019 },
+    { 0x0000b20c, 0x00000014, 0x00000014, 0x0001f019, 0x0001f019, 0x0001f019 },
+    { 0x0000a21c, 0x1463800a, 0x1463800a, 0x1463800a, 0x1463800a, 0x1463800a },
+    { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a250, 0x001ff000, 0x001ff000, 0x001da000, 0x001da000, 0x001da000 },
+    { 0x0000a274, 0x0a19c652, 0x0a19c652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
+    { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x0000a304, 0x00003002, 0x00003002, 0x00003002, 0x00003002, 0x00003002 },
+    { 0x0000a308, 0x00006004, 0x00006004, 0x00008009, 0x00008009, 0x00008009 },
+    { 0x0000a30c, 0x0000a006, 0x0000a006, 0x0000b00b, 0x0000b00b, 0x0000b00b },
+    { 0x0000a310, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012 },
+    { 0x0000a314, 0x00011014, 0x00011014, 0x00012048, 0x00012048, 0x00012048 },
+    { 0x0000a318, 0x0001504a, 0x0001504a, 0x0001604a, 0x0001604a, 0x0001604a },
+    { 0x0000a31c, 0x0001904c, 0x0001904c, 0x0001a211, 0x0001a211, 0x0001a211 },
+    { 0x0000a320, 0x0001c04e, 0x0001c04e, 0x0001e213, 0x0001e213, 0x0001e213 },
+    { 0x0000a324, 0x00020092, 0x00020092, 0x0002121b, 0x0002121b, 0x0002121b },
+    { 0x0000a328, 0x0002410a, 0x0002410a, 0x00024412, 0x00024412, 0x00024412 },
+    { 0x0000a32c, 0x0002710c, 0x0002710c, 0x00028414, 0x00028414, 0x00028414 },
+    { 0x0000a330, 0x0002b18b, 0x0002b18b, 0x0002b44a, 0x0002b44a, 0x0002b44a },
+    { 0x0000a334, 0x0002e1cc, 0x0002e1cc, 0x00030649, 0x00030649, 0x00030649 },
+    { 0x0000a338, 0x000321ec, 0x000321ec, 0x0003364b, 0x0003364b, 0x0003364b },
+    { 0x0000a33c, 0x000321ec, 0x000321ec, 0x00038a49, 0x00038a49, 0x00038a49 },
+    { 0x0000a340, 0x000321ec, 0x000321ec, 0x0003be48, 0x0003be48, 0x0003be48 },
+    { 0x0000a344, 0x000321ec, 0x000321ec, 0x0003ee4a, 0x0003ee4a, 0x0003ee4a },
+    { 0x0000a348, 0x000321ec, 0x000321ec, 0x00042e88, 0x00042e88, 0x00042e88 },
+    { 0x0000a34c, 0x000321ec, 0x000321ec, 0x00046e8a, 0x00046e8a, 0x00046e8a },
+    { 0x0000a350, 0x000321ec, 0x000321ec, 0x00049ec9, 0x00049ec9, 0x00049ec9 },
+    { 0x0000a354, 0x000321ec, 0x000321ec, 0x0004bf42, 0x0004bf42, 0x0004bf42 },
+    { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e },
+    { 0x0000a3d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+    { 0x00007894, 0x5a508000, 0x5a508000, 0x5a508000, 0x5a508000, 0x5a508000 },
+};
+
+static const u32 ar9280Common_9280_2[][2] = {
+    { 0x0000000c, 0x00000000 },
+    { 0x00000030, 0x00020015 },
+    { 0x00000034, 0x00000005 },
+    { 0x00000040, 0x00000000 },
+    { 0x00000044, 0x00000008 },
+    { 0x00000048, 0x00000008 },
+    { 0x0000004c, 0x00000010 },
+    { 0x00000050, 0x00000000 },
+    { 0x00000054, 0x0000001f },
+    { 0x00000800, 0x00000000 },
+    { 0x00000804, 0x00000000 },
+    { 0x00000808, 0x00000000 },
+    { 0x0000080c, 0x00000000 },
+    { 0x00000810, 0x00000000 },
+    { 0x00000814, 0x00000000 },
+    { 0x00000818, 0x00000000 },
+    { 0x0000081c, 0x00000000 },
+    { 0x00000820, 0x00000000 },
+    { 0x00000824, 0x00000000 },
+    { 0x00001040, 0x002ffc0f },
+    { 0x00001044, 0x002ffc0f },
+    { 0x00001048, 0x002ffc0f },
+    { 0x0000104c, 0x002ffc0f },
+    { 0x00001050, 0x002ffc0f },
+    { 0x00001054, 0x002ffc0f },
+    { 0x00001058, 0x002ffc0f },
+    { 0x0000105c, 0x002ffc0f },
+    { 0x00001060, 0x002ffc0f },
+    { 0x00001064, 0x002ffc0f },
+    { 0x00001230, 0x00000000 },
+    { 0x00001270, 0x00000000 },
+    { 0x00001038, 0x00000000 },
+    { 0x00001078, 0x00000000 },
+    { 0x000010b8, 0x00000000 },
+    { 0x000010f8, 0x00000000 },
+    { 0x00001138, 0x00000000 },
+    { 0x00001178, 0x00000000 },
+    { 0x000011b8, 0x00000000 },
+    { 0x000011f8, 0x00000000 },
+    { 0x00001238, 0x00000000 },
+    { 0x00001278, 0x00000000 },
+    { 0x000012b8, 0x00000000 },
+    { 0x000012f8, 0x00000000 },
+    { 0x00001338, 0x00000000 },
+    { 0x00001378, 0x00000000 },
+    { 0x000013b8, 0x00000000 },
+    { 0x000013f8, 0x00000000 },
+    { 0x00001438, 0x00000000 },
+    { 0x00001478, 0x00000000 },
+    { 0x000014b8, 0x00000000 },
+    { 0x000014f8, 0x00000000 },
+    { 0x00001538, 0x00000000 },
+    { 0x00001578, 0x00000000 },
+    { 0x000015b8, 0x00000000 },
+    { 0x000015f8, 0x00000000 },
+    { 0x00001638, 0x00000000 },
+    { 0x00001678, 0x00000000 },
+    { 0x000016b8, 0x00000000 },
+    { 0x000016f8, 0x00000000 },
+    { 0x00001738, 0x00000000 },
+    { 0x00001778, 0x00000000 },
+    { 0x000017b8, 0x00000000 },
+    { 0x000017f8, 0x00000000 },
+    { 0x0000103c, 0x00000000 },
+    { 0x0000107c, 0x00000000 },
+    { 0x000010bc, 0x00000000 },
+    { 0x000010fc, 0x00000000 },
+    { 0x0000113c, 0x00000000 },
+    { 0x0000117c, 0x00000000 },
+    { 0x000011bc, 0x00000000 },
+    { 0x000011fc, 0x00000000 },
+    { 0x0000123c, 0x00000000 },
+    { 0x0000127c, 0x00000000 },
+    { 0x000012bc, 0x00000000 },
+    { 0x000012fc, 0x00000000 },
+    { 0x0000133c, 0x00000000 },
+    { 0x0000137c, 0x00000000 },
+    { 0x000013bc, 0x00000000 },
+    { 0x000013fc, 0x00000000 },
+    { 0x0000143c, 0x00000000 },
+    { 0x0000147c, 0x00000000 },
+    { 0x00004030, 0x00000002 },
+    { 0x0000403c, 0x00000002 },
+    { 0x00004024, 0x0000001f },
+    { 0x00004060, 0x00000000 },
+    { 0x00004064, 0x00000000 },
+    { 0x00007010, 0x00000033 },
+    { 0x00007034, 0x00000002 },
+    { 0x00007038, 0x000004c2 },
+    { 0x00008004, 0x00000000 },
+    { 0x00008008, 0x00000000 },
+    { 0x0000800c, 0x00000000 },
+    { 0x00008018, 0x00000700 },
+    { 0x00008020, 0x00000000 },
+    { 0x00008038, 0x00000000 },
+    { 0x0000803c, 0x00000000 },
+    { 0x00008048, 0x40000000 },
+    { 0x00008054, 0x00000000 },
+    { 0x00008058, 0x00000000 },
+    { 0x0000805c, 0x000fc78f },
+    { 0x00008060, 0x0000000f },
+    { 0x00008064, 0x00000000 },
+    { 0x00008070, 0x00000000 },
+    { 0x000080c0, 0x2a80001a },
+    { 0x000080c4, 0x05dc01e0 },
+    { 0x000080c8, 0x1f402710 },
+    { 0x000080cc, 0x01f40000 },
+    { 0x000080d0, 0x00001e00 },
+    { 0x000080d4, 0x00000000 },
+    { 0x000080d8, 0x00400000 },
+    { 0x000080e0, 0xffffffff },
+    { 0x000080e4, 0x0000ffff },
+    { 0x000080e8, 0x003f3f3f },
+    { 0x000080ec, 0x00000000 },
+    { 0x000080f0, 0x00000000 },
+    { 0x000080f4, 0x00000000 },
+    { 0x000080f8, 0x00000000 },
+    { 0x000080fc, 0x00020000 },
+    { 0x00008100, 0x00020000 },
+    { 0x00008104, 0x00000001 },
+    { 0x00008108, 0x00000052 },
+    { 0x0000810c, 0x00000000 },
+    { 0x00008110, 0x00000168 },
+    { 0x00008118, 0x000100aa },
+    { 0x0000811c, 0x00003210 },
+    { 0x00008120, 0x08f04800 },
+    { 0x00008124, 0x00000000 },
+    { 0x00008128, 0x00000000 },
+    { 0x0000812c, 0x00000000 },
+    { 0x00008130, 0x00000000 },
+    { 0x00008134, 0x00000000 },
+    { 0x00008138, 0x00000000 },
+    { 0x0000813c, 0x00000000 },
+    { 0x00008144, 0x00000000 },
+    { 0x00008168, 0x00000000 },
+    { 0x0000816c, 0x00000000 },
+    { 0x00008170, 0x32143320 },
+    { 0x00008174, 0xfaa4fa50 },
+    { 0x00008178, 0x00000100 },
+    { 0x0000817c, 0x00000000 },
+    { 0x000081c0, 0x00000000 },
+    { 0x000081d0, 0x00003210 },
+    { 0x000081ec, 0x00000000 },
+    { 0x000081f0, 0x00000000 },
+    { 0x000081f4, 0x00000000 },
+    { 0x000081f8, 0x00000000 },
+    { 0x000081fc, 0x00000000 },
+    { 0x00008200, 0x00000000 },
+    { 0x00008204, 0x00000000 },
+    { 0x00008208, 0x00000000 },
+    { 0x0000820c, 0x00000000 },
+    { 0x00008210, 0x00000000 },
+    { 0x00008214, 0x00000000 },
+    { 0x00008218, 0x00000000 },
+    { 0x0000821c, 0x00000000 },
+    { 0x00008220, 0x00000000 },
+    { 0x00008224, 0x00000000 },
+    { 0x00008228, 0x00000000 },
+    { 0x0000822c, 0x00000000 },
+    { 0x00008230, 0x00000000 },
+    { 0x00008234, 0x00000000 },
+    { 0x00008238, 0x00000000 },
+    { 0x0000823c, 0x00000000 },
+    { 0x00008240, 0x00100000 },
+    { 0x00008244, 0x0010f400 },
+    { 0x00008248, 0x00000100 },
+    { 0x0000824c, 0x0001e800 },
+    { 0x00008250, 0x00000000 },
+    { 0x00008254, 0x00000000 },
+    { 0x00008258, 0x00000000 },
+    { 0x0000825c, 0x400000ff },
+    { 0x00008260, 0x00080922 },
+    { 0x00008270, 0x00000000 },
+    { 0x00008274, 0x40000000 },
+    { 0x00008278, 0x003e4180 },
+    { 0x0000827c, 0x00000000 },
+    { 0x00008284, 0x0000002c },
+    { 0x00008288, 0x0000002c },
+    { 0x0000828c, 0x00000000 },
+    { 0x00008294, 0x00000000 },
+    { 0x00008298, 0x00000000 },
+    { 0x0000829c, 0x00000000 },
+    { 0x00008300, 0x00000040 },
+    { 0x00008314, 0x00000000 },
+    { 0x00008328, 0x00000000 },
+    { 0x0000832c, 0x00000007 },
+    { 0x00008330, 0x00000302 },
+    { 0x00008334, 0x00000e00 },
+    { 0x00008338, 0x00000000 },
+    { 0x0000833c, 0x00000000 },
+    { 0x00008340, 0x000107ff },
+    { 0x00008344, 0x00581043 },
+    { 0x00009808, 0x00000000 },
+    { 0x0000980c, 0xafa68e30 },
+    { 0x00009810, 0xfd14e000 },
+    { 0x00009814, 0x9c0a9f6b },
+    { 0x0000981c, 0x00000000 },
+    { 0x0000982c, 0x0000a000 },
+    { 0x00009830, 0x00000000 },
+    { 0x0000983c, 0x00200400 },
+    { 0x0000984c, 0x0040233c },
+    { 0x0000a84c, 0x0040233c },
+    { 0x00009854, 0x00000044 },
+    { 0x00009900, 0x00000000 },
+    { 0x00009904, 0x00000000 },
+    { 0x00009908, 0x00000000 },
+    { 0x0000990c, 0x00000000 },
+    { 0x00009910, 0x01002310 },
+    { 0x0000991c, 0x10000fff },
+    { 0x00009920, 0x04900000 },
+    { 0x0000a920, 0x04900000 },
+    { 0x00009928, 0x00000001 },
+    { 0x0000992c, 0x00000004 },
+    { 0x00009934, 0x1e1f2022 },
+    { 0x00009938, 0x0a0b0c0d },
+    { 0x0000993c, 0x00000000 },
+    { 0x00009948, 0x9280c00a },
+    { 0x0000994c, 0x00020028 },
+    { 0x00009954, 0x5f3ca3de },
+    { 0x00009958, 0x2108ecff },
+    { 0x00009940, 0x14750604 },
+    { 0x0000c95c, 0x004b6a8e },
+    { 0x0000c968, 0x000003ce },
+    { 0x00009970, 0x190fb515 },
+    { 0x00009974, 0x00000000 },
+    { 0x00009978, 0x00000001 },
+    { 0x0000997c, 0x00000000 },
+    { 0x00009980, 0x00000000 },
+    { 0x00009984, 0x00000000 },
+    { 0x00009988, 0x00000000 },
+    { 0x0000998c, 0x00000000 },
+    { 0x00009990, 0x00000000 },
+    { 0x00009994, 0x00000000 },
+    { 0x00009998, 0x00000000 },
+    { 0x0000999c, 0x00000000 },
+    { 0x000099a0, 0x00000000 },
+    { 0x000099a4, 0x00000001 },
+    { 0x000099a8, 0x201fff00 },
+    { 0x000099ac, 0x006f0000 },
+    { 0x000099b0, 0x03051000 },
+    { 0x000099b4, 0x00000820 },
+    { 0x000099dc, 0x00000000 },
+    { 0x000099e0, 0x00000000 },
+    { 0x000099e4, 0xaaaaaaaa },
+    { 0x000099e8, 0x3c466478 },
+    { 0x000099ec, 0x0cc80caa },
+    { 0x000099f0, 0x00000000 },
+    { 0x000099fc, 0x00001042 },
+    { 0x0000a210, 0x4080a333 },
+    { 0x0000a214, 0x40206c10 },
+    { 0x0000a218, 0x009c4060 },
+    { 0x0000a220, 0x01834061 },
+    { 0x0000a224, 0x00000400 },
+    { 0x0000a228, 0x000003b5 },
+    { 0x0000a22c, 0x233f71c0 },
+    { 0x0000a234, 0x20202020 },
+    { 0x0000a238, 0x20202020 },
+    { 0x0000a23c, 0x13c88000 },
+    { 0x0000a240, 0x38490a20 },
+    { 0x0000a244, 0x00007bb6 },
+    { 0x0000a248, 0x0fff3ffc },
+    { 0x0000a24c, 0x00000000 },
+    { 0x0000a254, 0x00000000 },
+    { 0x0000a258, 0x0cdbd380 },
+    { 0x0000a25c, 0x0f0f0f01 },
+    { 0x0000a260, 0xdfa91f01 },
+    { 0x0000a268, 0x00000000 },
+    { 0x0000a26c, 0x0ebae9c6 },
+    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000d270, 0x00820820 },
+    { 0x0000a278, 0x1ce739ce },
+    { 0x0000a27c, 0x050701ce },
+    { 0x0000d35c, 0x07ffffef },
+    { 0x0000d360, 0x0fffffe7 },
+    { 0x0000d364, 0x17ffffe5 },
+    { 0x0000d368, 0x1fffffe4 },
+    { 0x0000d36c, 0x37ffffe3 },
+    { 0x0000d370, 0x3fffffe3 },
+    { 0x0000d374, 0x57ffffe3 },
+    { 0x0000d378, 0x5fffffe2 },
+    { 0x0000d37c, 0x7fffffe2 },
+    { 0x0000d380, 0x7f3c7bba },
+    { 0x0000d384, 0xf3307ff0 },
+    { 0x0000a388, 0x0c000000 },
+    { 0x0000a38c, 0x20202020 },
+    { 0x0000a390, 0x20202020 },
+    { 0x0000a394, 0x1ce739ce },
+    { 0x0000a398, 0x000001ce },
+    { 0x0000a39c, 0x00000001 },
+    { 0x0000a3a0, 0x00000000 },
+    { 0x0000a3a4, 0x00000000 },
+    { 0x0000a3a8, 0x00000000 },
+    { 0x0000a3ac, 0x00000000 },
+    { 0x0000a3b0, 0x00000000 },
+    { 0x0000a3b4, 0x00000000 },
+    { 0x0000a3b8, 0x00000000 },
+    { 0x0000a3bc, 0x00000000 },
+    { 0x0000a3c0, 0x00000000 },
+    { 0x0000a3c4, 0x00000000 },
+    { 0x0000a3c8, 0x00000246 },
+    { 0x0000a3cc, 0x20202020 },
+    { 0x0000a3d0, 0x20202020 },
+    { 0x0000a3d4, 0x20202020 },
+    { 0x0000a3dc, 0x1ce739ce },
+    { 0x0000a3e0, 0x000001ce },
+    { 0x0000a3e4, 0x00000000 },
+    { 0x0000a3e8, 0x18c43433 },
+    { 0x0000a3ec, 0x00f70081 },
+    { 0x00007800, 0x00040000 },
+    { 0x00007804, 0xdb005012 },
+    { 0x00007808, 0x04924914 },
+    { 0x0000780c, 0x21084210 },
+    { 0x00007810, 0x6d801300 },
+    { 0x00007814, 0x0019beff },
+    { 0x00007818, 0x07e41000 },
+    { 0x0000781c, 0x00392000 },
+    { 0x00007820, 0x92592480 },
+    { 0x00007824, 0x00040000 },
+    { 0x00007828, 0xdb005012 },
+    { 0x0000782c, 0x04924914 },
+    { 0x00007830, 0x21084210 },
+    { 0x00007834, 0x6d801300 },
+    { 0x00007838, 0x0019beff },
+    { 0x0000783c, 0x07e40000 },
+    { 0x00007840, 0x00392000 },
+    { 0x00007844, 0x92592480 },
+    { 0x00007848, 0x00100000 },
+    { 0x0000784c, 0x773f0567 },
+    { 0x00007850, 0x54214514 },
+    { 0x00007854, 0x12035828 },
+    { 0x00007858, 0x9259269a },
+    { 0x00007860, 0x52802000 },
+    { 0x00007864, 0x0a8e370e },
+    { 0x00007868, 0xc0102850 },
+    { 0x0000786c, 0x812d4000 },
+    { 0x00007870, 0x807ec400 },
+    { 0x00007874, 0x001b6db0 },
+    { 0x00007878, 0x00376b63 },
+    { 0x0000787c, 0x06db6db6 },
+    { 0x00007880, 0x006d8000 },
+    { 0x00007884, 0xffeffffe },
+    { 0x00007888, 0xffeffffe },
+    { 0x0000788c, 0x00010000 },
+    { 0x00007890, 0x02060aeb },
+    { 0x00007898, 0x2a850160 },
+};
+
+static const u32 ar9280Modes_fast_clock_9280_2[][3] = {
+    { 0x00001030, 0x00000268, 0x000004d0 },
+    { 0x00001070, 0x0000018c, 0x00000318 },
+    { 0x000010b0, 0x00000fd0, 0x00001fa0 },
+    { 0x00008014, 0x044c044c, 0x08980898 },
+    { 0x0000801c, 0x148ec02b, 0x148ec057 },
+    { 0x00008318, 0x000044c0, 0x00008980 },
+    { 0x00009820, 0x02020200, 0x02020200 },
+    { 0x00009824, 0x00000f0f, 0x00000f0f },
+    { 0x00009828, 0x0b020001, 0x0b020001 },
+    { 0x00009834, 0x00000f0f, 0x00000f0f },
+    { 0x00009844, 0x03721821, 0x03721821 },
+    { 0x00009914, 0x00000898, 0x00000898 },
+    { 0x00009918, 0x0000000b, 0x00000016 },
+    { 0x00009944, 0xdfbc1210, 0xdfbc1210 },
+};
+
+
+
+static const u32 ar9280PciePhy_clkreq_off_L1_9280[][2] = {
+    {0x00004040,  0x9248fd00 },
+    {0x00004040,  0x24924924 },
+    {0x00004040,  0xa8000019 },
+    {0x00004040,  0x13160820 },
+    {0x00004040,  0xe5980560 },
+    {0x00004040,  0x401dcffc },
+    {0x00004040,  0x1aaabe40 },
+    {0x00004040,  0xbe105554 },
+    {0x00004040,  0x00043007 },
+    {0x00004044,  0x00000000 },
+};
+
+
+
+static const u32 ar9280PciePhy_clkreq_always_on_L1_9280[][2] = {
+    {0x00004040,  0x9248fd00 },
+    {0x00004040,  0x24924924 },
+    {0x00004040,  0xa8000019 },
+    {0x00004040,  0x13160820 },
+    {0x00004040,  0xe5980560 },
+    {0x00004040,  0x401dcffd },
+    {0x00004040,  0x1aaabe40 },
+    {0x00004040,  0xbe105554 },
+    {0x00004040,  0x00043007 },
+    {0x00004044,  0x00000000 },
+};
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
new file mode 100644
index 00000000000..99badf1404c
--- /dev/null
+++ b/drivers/net/wireless/ath9k/main.c
@@ -0,0 +1,1494 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* mac80211 and PCI callbacks */
+
+#include <linux/nl80211.h>
+#include "core.h"
+
+#define ATH_PCI_VERSION "0.1"
+
+#define IEEE80211_HTCAP_MAXRXAMPDU_FACTOR	13
+#define IEEE80211_ACTION_CAT_HT			7
+#define IEEE80211_ACTION_HT_TXCHWIDTH		0
+
+static char *dev_info = "ath9k";
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
+MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
+MODULE_LICENSE("Dual BSD/GPL");
+
+static struct pci_device_id ath_pci_id_table[] __devinitdata = {
+	{ PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI   */
+	{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
+	{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI   */
+	{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
+	{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
+	{ 0 }
+};
+
+static int ath_get_channel(struct ath_softc *sc,
+			   struct ieee80211_channel *chan)
+{
+	int i;
+
+	for (i = 0; i < sc->sc_ah->ah_nchan; i++) {
+		if (sc->sc_ah->ah_channels[i].channel == chan->center_freq)
+			return i;
+	}
+
+	return -1;
+}
+
+static u32 ath_get_extchanmode(struct ath_softc *sc,
+				     struct ieee80211_channel *chan)
+{
+	u32 chanmode = 0;
+	u8 ext_chan_offset = sc->sc_ht_info.ext_chan_offset;
+	enum ath9k_ht_macmode tx_chan_width = sc->sc_ht_info.tx_chan_width;
+
+	switch (chan->band) {
+	case IEEE80211_BAND_2GHZ:
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_20))
+			chanmode = CHANNEL_G_HT20;
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			chanmode = CHANNEL_G_HT40PLUS;
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			chanmode = CHANNEL_G_HT40MINUS;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_20))
+			chanmode = CHANNEL_A_HT20;
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			chanmode = CHANNEL_A_HT40PLUS;
+		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) &&
+		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
+			chanmode = CHANNEL_A_HT40MINUS;
+		break;
+	default:
+		break;
+	}
+
+	return chanmode;
+}
+
+
+static int ath_setkey_tkip(struct ath_softc *sc,
+			   struct ieee80211_key_conf *key,
+			   struct ath9k_keyval *hk,
+			   const u8 *addr)
+{
+	u8 *key_rxmic = NULL;
+	u8 *key_txmic = NULL;
+
+	key_txmic = key->key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY;
+	key_rxmic = key->key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
+
+	if (addr == NULL) {
+		/* Group key installation */
+		memcpy(hk->kv_mic,  key_rxmic, sizeof(hk->kv_mic));
+		return ath_keyset(sc, key->keyidx, hk, addr);
+	}
+	if (!sc->sc_splitmic) {
+		/*
+		 * data key goes at first index,
+		 * the hal handles the MIC keys at index+64.
+		 */
+		memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
+		memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic));
+		return ath_keyset(sc, key->keyidx, hk, addr);
+	}
+	/*
+	 * TX key goes at first index, RX key at +32.
+	 * The hal handles the MIC keys at index+64.
+	 */
+	memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
+	if (!ath_keyset(sc, key->keyidx, hk, NULL)) {
+		/* Txmic entry failed. No need to proceed further */
+		DPRINTF(sc, ATH_DBG_KEYCACHE,
+			"%s Setting TX MIC Key Failed\n", __func__);
+		return 0;
+	}
+
+	memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
+	/* XXX delete tx key on failure? */
+	return ath_keyset(sc, key->keyidx+32, hk, addr);
+}
+
+static int ath_key_config(struct ath_softc *sc,
+			  const u8 *addr,
+			  struct ieee80211_key_conf *key)
+{
+	struct ieee80211_vif *vif;
+	struct ath9k_keyval hk;
+	const u8 *mac = NULL;
+	int ret = 0;
+	enum ieee80211_if_types opmode;
+
+	memset(&hk, 0, sizeof(hk));
+
+	switch (key->alg) {
+	case ALG_WEP:
+		hk.kv_type = ATH9K_CIPHER_WEP;
+		break;
+	case ALG_TKIP:
+		hk.kv_type = ATH9K_CIPHER_TKIP;
+		break;
+	case ALG_CCMP:
+		hk.kv_type = ATH9K_CIPHER_AES_CCM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	hk.kv_len  = key->keylen;
+	memcpy(hk.kv_val, key->key, key->keylen);
+
+	if (!sc->sc_vaps[0])
+		return -EIO;
+
+	vif = sc->sc_vaps[0]->av_if_data;
+	opmode = vif->type;
+
+	/*
+	 *  Strategy:
+	 *   For _M_STA mc tx, we will not setup a key at all since we never
+	 *   tx mc.
+	 *   _M_STA mc rx, we will use the keyID.
+	 *   for _M_IBSS mc tx, we will use the keyID, and no macaddr.
+	 *   for _M_IBSS mc rx, we will alloc a slot and plumb the mac of the
+	 *   peer node. BUT we will plumb a cleartext key so that we can do
+	 *   perSta default key table lookup in software.
+	 */
+	if (is_broadcast_ether_addr(addr)) {
+		switch (opmode) {
+		case IEEE80211_IF_TYPE_STA:
+			/* default key:  could be group WPA key
+			 * or could be static WEP key */
+			mac = NULL;
+			break;
+		case IEEE80211_IF_TYPE_IBSS:
+			break;
+		case IEEE80211_IF_TYPE_AP:
+			break;
+		default:
+			ASSERT(0);
+			break;
+		}
+	} else {
+		mac = addr;
+	}
+
+	if (key->alg == ALG_TKIP)
+		ret = ath_setkey_tkip(sc, key, &hk, mac);
+	else
+		ret = ath_keyset(sc, key->keyidx, &hk, mac);
+
+	if (!ret)
+		return -EIO;
+
+	if (mac)
+		sc->sc_keytype = hk.kv_type;
+	return 0;
+}
+
+static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key)
+{
+#define ATH_MAX_NUM_KEYS 4
+	int freeslot;
+
+	freeslot = (key->keyidx >= ATH_MAX_NUM_KEYS) ? 1 : 0;
+	ath_key_reset(sc, key->keyidx, freeslot);
+#undef ATH_MAX_NUM_KEYS
+}
+
+static void setup_ht_cap(struct ieee80211_ht_info *ht_info)
+{
+/* Until mac80211 includes these fields */
+
+#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
+#define	IEEE80211_HT_CAP_MAXRXAMPDU_65536 0x3   /* 2 ^ 16 */
+#define	IEEE80211_HT_CAP_MPDUDENSITY_8 0x6     	/* 8 usec */
+
+	ht_info->ht_supported = 1;
+	ht_info->cap = (u16)IEEE80211_HT_CAP_SUP_WIDTH
+			|(u16)IEEE80211_HT_CAP_MIMO_PS
+			|(u16)IEEE80211_HT_CAP_SGI_40
+			|(u16)IEEE80211_HT_CAP_DSSSCCK40;
+
+	ht_info->ampdu_factor = IEEE80211_HT_CAP_MAXRXAMPDU_65536;
+	ht_info->ampdu_density = IEEE80211_HT_CAP_MPDUDENSITY_8;
+	/* setup supported mcs set */
+	memset(ht_info->supp_mcs_set, 0, 16);
+	ht_info->supp_mcs_set[0] = 0xff;
+	ht_info->supp_mcs_set[1] = 0xff;
+	ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED;
+}
+
+static int ath_rate2idx(struct ath_softc *sc, int rate)
+{
+	int i = 0, cur_band, n_rates;
+	struct ieee80211_hw *hw = sc->hw;
+
+	cur_band = hw->conf.channel->band;
+	n_rates = sc->sbands[cur_band].n_bitrates;
+
+	for (i = 0; i < n_rates; i++) {
+		if (sc->sbands[cur_band].bitrates[i].bitrate == rate)
+			break;
+	}
+
+	/*
+	 * NB:mac80211 validates rx rate index against the supported legacy rate
+	 * index only (should be done against ht rates also), return the highest
+	 * legacy rate index for rx rate which does not match any one of the
+	 * supported basic and extended rates to make mac80211 happy.
+	 * The following hack will be cleaned up once the issue with
+	 * the rx rate index validation in mac80211 is fixed.
+	 */
+	if (i == n_rates)
+		return n_rates - 1;
+	return i;
+}
+
+static void ath9k_rx_prepare(struct ath_softc *sc,
+			     struct sk_buff *skb,
+			     struct ath_recv_status *status,
+			     struct ieee80211_rx_status *rx_status)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_channel *curchan = hw->conf.channel;
+
+	memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
+
+	rx_status->mactime = status->tsf;
+	rx_status->band = curchan->band;
+	rx_status->freq =  curchan->center_freq;
+	rx_status->noise = ATH_DEFAULT_NOISE_FLOOR;
+	rx_status->signal = rx_status->noise + status->rssi;
+	rx_status->rate_idx = ath_rate2idx(sc, (status->rateKbps / 100));
+	rx_status->antenna = status->antenna;
+	rx_status->qual = status->rssi * 100 / 64;
+
+	if (status->flags & ATH_RX_MIC_ERROR)
+		rx_status->flag |= RX_FLAG_MMIC_ERROR;
+	if (status->flags & ATH_RX_FCS_ERROR)
+		rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+	rx_status->flag |= RX_FLAG_TSFT;
+}
+
+static u8 parse_mpdudensity(u8 mpdudensity)
+{
+	/*
+	 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
+	 *   0 for no restriction
+	 *   1 for 1/4 us
+	 *   2 for 1/2 us
+	 *   3 for 1 us
+	 *   4 for 2 us
+	 *   5 for 4 us
+	 *   6 for 8 us
+	 *   7 for 16 us
+	 */
+	switch (mpdudensity) {
+	case 0:
+		return 0;
+	case 1:
+	case 2:
+	case 3:
+		/* Our lower layer calculations limit our precision to
+		   1 microsecond */
+		return 1;
+	case 4:
+		return 2;
+	case 5:
+		return 4;
+	case 6:
+		return 8;
+	case 7:
+		return 16;
+	default:
+		return 0;
+	}
+}
+
+static int ath9k_start(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ieee80211_channel *curchan = hw->conf.channel;
+	int error = 0, pos;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with "
+		"initial channel: %d MHz\n", __func__, curchan->center_freq);
+
+	/* setup initial channel */
+
+	pos = ath_get_channel(sc, curchan);
+	if (pos == -1) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__);
+		return -EINVAL;
+	}
+
+	sc->sc_ah->ah_channels[pos].chanmode =
+		(curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A;
+
+	/* open ath_dev */
+	error = ath_open(sc, &sc->sc_ah->ah_channels[pos]);
+	if (error) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Unable to complete ath_open\n", __func__);
+		return error;
+	}
+
+	ieee80211_wake_queues(hw);
+	return 0;
+}
+
+static int ath9k_tx(struct ieee80211_hw *hw,
+		    struct sk_buff *skb)
+{
+	struct ath_softc *sc = hw->priv;
+	int hdrlen, padsize;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+	/*
+	 * As a temporary workaround, assign seq# here; this will likely need
+	 * to be cleaned up to work better with Beacon transmission and virtual
+	 * BSSes.
+	 */
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			sc->seq_no += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+	}
+
+	/* Add the padding after the header if this is not already done */
+	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+	if (hdrlen & 3) {
+		padsize = hdrlen % 4;
+		if (skb_headroom(skb) < padsize)
+			return -1;
+		skb_push(skb, padsize);
+		memmove(skb->data, skb->data + padsize, hdrlen);
+	}
+
+	DPRINTF(sc, ATH_DBG_XMIT, "%s: transmitting packet, skb: %p\n",
+		__func__,
+		skb);
+
+	if (ath_tx_start(sc, skb) != 0) {
+		DPRINTF(sc, ATH_DBG_XMIT, "%s: TX failed\n", __func__);
+		dev_kfree_skb_any(skb);
+		/* FIXME: Check for proper return value from ATH_DEV */
+		return 0;
+	}
+
+	return 0;
+}
+
+static void ath9k_stop(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
+	int error;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__);
+
+	error = ath_suspend(sc);
+	if (error)
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"%s: Device is no longer present\n", __func__);
+
+	ieee80211_stop_queues(hw);
+}
+
+static int ath9k_add_interface(struct ieee80211_hw *hw,
+			       struct ieee80211_if_init_conf *conf)
+{
+	struct ath_softc *sc = hw->priv;
+	int error, ic_opmode = 0;
+
+	/* Support only vap for now */
+
+	if (sc->sc_nvaps)
+		return -ENOBUFS;
+
+	switch (conf->type) {
+	case IEEE80211_IF_TYPE_STA:
+		ic_opmode = ATH9K_M_STA;
+		break;
+	case IEEE80211_IF_TYPE_IBSS:
+		ic_opmode = ATH9K_M_IBSS;
+		break;
+	default:
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Only STA and IBSS are supported currently\n",
+			__func__);
+		return -EOPNOTSUPP;
+	}
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a VAP of type: %d\n",
+		__func__,
+		ic_opmode);
+
+	error = ath_vap_attach(sc, 0, conf->vif, ic_opmode);
+	if (error) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Unable to attach vap, error: %d\n",
+			__func__, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static void ath9k_remove_interface(struct ieee80211_hw *hw,
+				   struct ieee80211_if_init_conf *conf)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_vap *avp;
+	int error;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach VAP\n", __func__);
+
+	avp = sc->sc_vaps[0];
+	if (avp == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n",
+			__func__);
+		return;
+	}
+
+#ifdef CONFIG_SLOW_ANT_DIV
+	ath_slow_ant_div_stop(&sc->sc_antdiv);
+#endif
+
+	/* Update ratectrl */
+	ath_rate_newstate(sc, avp);
+
+	/* Reclaim beacon resources */
+	if (sc->sc_opmode == ATH9K_M_HOSTAP || sc->sc_opmode == ATH9K_M_IBSS) {
+		ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq);
+		ath_beacon_return(sc, avp);
+	}
+
+	/* Set interrupt mask */
+	sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
+	ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask & ~ATH9K_INT_GLOBAL);
+	sc->sc_beacons = 0;
+
+	error = ath_vap_detach(sc, 0);
+	if (error)
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Unable to detach vap, error: %d\n",
+			__func__, error);
+}
+
+static int ath9k_config(struct ieee80211_hw *hw,
+			struct ieee80211_conf *conf)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ieee80211_channel *curchan = hw->conf.channel;
+	int pos;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n",
+		__func__,
+		curchan->center_freq);
+
+	pos = ath_get_channel(sc, curchan);
+	if (pos == -1) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__);
+		return -EINVAL;
+	}
+
+	sc->sc_ah->ah_channels[pos].chanmode =
+		(curchan->band == IEEE80211_BAND_2GHZ) ?
+		CHANNEL_G : CHANNEL_A;
+
+	if (sc->sc_curaid && hw->conf.ht_conf.ht_supported)
+		sc->sc_ah->ah_channels[pos].chanmode =
+			ath_get_extchanmode(sc, curchan);
+
+	sc->sc_config.txpowlimit = 2 * conf->power_level;
+
+	/* set h/w channel */
+	if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to set channel\n",
+			__func__);
+
+	return 0;
+}
+
+static int ath9k_config_interface(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_if_conf *conf)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_vap *avp;
+	u32 rfilt = 0;
+	int error, i;
+	DECLARE_MAC_BUF(mac);
+
+	avp = sc->sc_vaps[0];
+	if (avp == NULL) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if ((conf->changed & IEEE80211_IFCC_BSSID) &&
+	    !is_zero_ether_addr(conf->bssid)) {
+		switch (vif->type) {
+		case IEEE80211_IF_TYPE_STA:
+		case IEEE80211_IF_TYPE_IBSS:
+			/* Update ratectrl about the new state */
+			ath_rate_newstate(sc, avp);
+
+			/* Set rx filter */
+			rfilt = ath_calcrxfilter(sc);
+			ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
+
+			/* Set BSSID */
+			memcpy(sc->sc_curbssid, conf->bssid, ETH_ALEN);
+			sc->sc_curaid = 0;
+			ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid,
+					       sc->sc_curaid);
+
+			/* Set aggregation protection mode parameters */
+			sc->sc_config.ath_aggr_prot = 0;
+
+			/*
+			 * Reset our TSF so that its value is lower than the
+			 * beacon that we are trying to catch.
+			 * Only then hw will update its TSF register with the
+			 * new beacon. Reset the TSF before setting the BSSID
+			 * to avoid allowing in any frames that would update
+			 * our TSF only to have us clear it
+			 * immediately thereafter.
+			 */
+			ath9k_hw_reset_tsf(sc->sc_ah);
+
+			/* Disable BMISS interrupt when we're not associated */
+			ath9k_hw_set_interrupts(sc->sc_ah,
+					sc->sc_imask &
+					~(ATH9K_INT_SWBA | ATH9K_INT_BMISS));
+			sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
+
+			DPRINTF(sc, ATH_DBG_CONFIG,
+				"%s: RX filter 0x%x bssid %s aid 0x%x\n",
+				__func__, rfilt,
+				print_mac(mac, sc->sc_curbssid), sc->sc_curaid);
+
+			/* need to reconfigure the beacon */
+			sc->sc_beacons = 0;
+
+			break;
+		default:
+			break;
+		}
+	}
+
+	if ((conf->changed & IEEE80211_IFCC_BEACON) &&
+	    (vif->type == IEEE80211_IF_TYPE_IBSS)) {
+		/*
+		 * Allocate and setup the beacon frame.
+		 *
+		 * Stop any previous beacon DMA.  This may be
+		 * necessary, for example, when an ibss merge
+		 * causes reconfiguration; we may be called
+		 * with beacon transmission active.
+		 */
+		ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq);
+
+		error = ath_beacon_alloc(sc, 0);
+		if (error != 0)
+			return error;
+
+		ath_beacon_sync(sc, 0);
+	}
+
+	/* Check for WLAN_CAPABILITY_PRIVACY ? */
+	if ((avp->av_opmode != IEEE80211_IF_TYPE_STA)) {
+		for (i = 0; i < IEEE80211_WEP_NKID; i++)
+			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
+				ath9k_hw_keysetmac(sc->sc_ah,
+						   (u16)i,
+						   sc->sc_curbssid);
+	}
+
+	/* Only legacy IBSS for now */
+	if (vif->type == IEEE80211_IF_TYPE_IBSS)
+		ath_update_chainmask(sc, 0);
+
+	return 0;
+}
+
+#define SUPPORTED_FILTERS			\
+	(FIF_PROMISC_IN_BSS |			\
+	FIF_ALLMULTI |				\
+	FIF_CONTROL |				\
+	FIF_OTHER_BSS |				\
+	FIF_BCN_PRBRESP_PROMISC |		\
+	FIF_FCSFAIL)
+
+/* Accept unicast, bcast and mcast frames */
+
+static void ath9k_configure_filter(struct ieee80211_hw *hw,
+				   unsigned int changed_flags,
+				   unsigned int *total_flags,
+				   int mc_count,
+				   struct dev_mc_list *mclist)
+{
+	struct ath_softc *sc = hw->priv;
+
+	changed_flags &= SUPPORTED_FILTERS;
+	*total_flags &= SUPPORTED_FILTERS;
+
+	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
+		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
+			ath_scan_start(sc);
+		else
+			ath_scan_end(sc);
+	}
+}
+
+static void ath9k_sta_notify(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     enum sta_notify_cmd cmd,
+			     const u8 *addr)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_node *an;
+	unsigned long flags;
+	DECLARE_MAC_BUF(mac);
+
+	spin_lock_irqsave(&sc->node_lock, flags);
+	an = ath_node_find(sc, (u8 *) addr);
+	spin_unlock_irqrestore(&sc->node_lock, flags);
+
+	switch (cmd) {
+	case STA_NOTIFY_ADD:
+		spin_lock_irqsave(&sc->node_lock, flags);
+		if (!an) {
+			ath_node_attach(sc, (u8 *)addr, 0);
+			DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a node: %s\n",
+				__func__,
+				print_mac(mac, addr));
+		} else {
+			ath_node_get(sc, (u8 *)addr);
+		}
+		spin_unlock_irqrestore(&sc->node_lock, flags);
+		break;
+	case STA_NOTIFY_REMOVE:
+		if (!an)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Removal of a non-existent node\n",
+				__func__);
+		else {
+			ath_node_put(sc, an, ATH9K_BH_STATUS_INTACT);
+			DPRINTF(sc, ATH_DBG_CONFIG, "%s: Put a node: %s\n",
+				__func__,
+				print_mac(mac, addr));
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static int ath9k_conf_tx(struct ieee80211_hw *hw,
+			 u16 queue,
+			 const struct ieee80211_tx_queue_params *params)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath9k_tx_queue_info qi;
+	int ret = 0, qnum;
+
+	if (queue >= WME_NUM_AC)
+		return 0;
+
+	qi.tqi_aifs = params->aifs;
+	qi.tqi_cwmin = params->cw_min;
+	qi.tqi_cwmax = params->cw_max;
+	qi.tqi_burstTime = params->txop;
+	qnum = ath_get_hal_qnum(queue, sc);
+
+	DPRINTF(sc, ATH_DBG_CONFIG,
+		"%s: Configure tx [queue/halq] [%d/%d],  "
+		"aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
+		__func__,
+		queue,
+		qnum,
+		params->aifs,
+		params->cw_min,
+		params->cw_max,
+		params->txop);
+
+	ret = ath_txq_update(sc, qnum, &qi);
+	if (ret)
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: TXQ Update failed\n", __func__);
+
+	return ret;
+}
+
+static int ath9k_set_key(struct ieee80211_hw *hw,
+			 enum set_key_cmd cmd,
+			 const u8 *local_addr,
+			 const u8 *addr,
+			 struct ieee80211_key_conf *key)
+{
+	struct ath_softc *sc = hw->priv;
+	int ret = 0;
+
+	DPRINTF(sc, ATH_DBG_KEYCACHE, " %s: Set HW Key\n", __func__);
+
+	switch (cmd) {
+	case SET_KEY:
+		ret = ath_key_config(sc, addr, key);
+		if (!ret) {
+			set_bit(key->keyidx, sc->sc_keymap);
+			key->hw_key_idx = key->keyidx;
+			/* push IV and Michael MIC generation to stack */
+			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+			if (key->alg == ALG_TKIP)
+				key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		}
+		break;
+	case DISABLE_KEY:
+		ath_key_delete(sc, key);
+		clear_bit(key->keyidx, sc->sc_keymap);
+		sc->sc_keytype = ATH9K_CIPHER_CLR;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void ath9k_ht_conf(struct ath_softc *sc,
+			  struct ieee80211_bss_conf *bss_conf)
+{
+#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14)
+	struct ath_ht_info *ht_info = &sc->sc_ht_info;
+
+	if (bss_conf->assoc_ht) {
+		ht_info->ext_chan_offset =
+			bss_conf->ht_bss_conf->bss_cap &
+				IEEE80211_HT_IE_CHA_SEC_OFFSET;
+
+		if (!(bss_conf->ht_conf->cap &
+			IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
+			    (bss_conf->ht_bss_conf->bss_cap &
+				IEEE80211_HT_IE_CHA_WIDTH))
+			ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040;
+		else
+			ht_info->tx_chan_width = ATH9K_HT_MACMODE_20;
+
+		ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width);
+		ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
+					bss_conf->ht_conf->ampdu_factor);
+		ht_info->mpdudensity =
+			parse_mpdudensity(bss_conf->ht_conf->ampdu_density);
+
+	}
+
+#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT
+}
+
+static void ath9k_bss_assoc_info(struct ath_softc *sc,
+				 struct ieee80211_bss_conf *bss_conf)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_channel *curchan = hw->conf.channel;
+	struct ath_vap *avp;
+	int pos;
+	DECLARE_MAC_BUF(mac);
+
+	if (bss_conf->assoc) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info ASSOC %d\n",
+			__func__,
+			bss_conf->aid);
+
+		avp = sc->sc_vaps[0];
+		if (avp == NULL) {
+			DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n",
+				__func__);
+			return;
+		}
+
+		/* New association, store aid */
+		if (avp->av_opmode == ATH9K_M_STA) {
+			sc->sc_curaid = bss_conf->aid;
+			ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid,
+					       sc->sc_curaid);
+		}
+
+		/* Configure the beacon */
+		ath_beacon_config(sc, 0);
+		sc->sc_beacons = 1;
+
+		/* Reset rssi stats */
+		sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER;
+		sc->sc_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER;
+		sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
+		sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
+
+		/* Update chainmask */
+		ath_update_chainmask(sc, bss_conf->assoc_ht);
+
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"%s: bssid %s aid 0x%x\n",
+			__func__,
+			print_mac(mac, sc->sc_curbssid), sc->sc_curaid);
+
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n",
+			__func__,
+			curchan->center_freq);
+
+		pos = ath_get_channel(sc, curchan);
+		if (pos == -1) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Invalid channel\n", __func__);
+			return;
+		}
+
+		if (hw->conf.ht_conf.ht_supported)
+			sc->sc_ah->ah_channels[pos].chanmode =
+				ath_get_extchanmode(sc, curchan);
+		else
+			sc->sc_ah->ah_channels[pos].chanmode =
+				(curchan->band == IEEE80211_BAND_2GHZ) ?
+				CHANNEL_G : CHANNEL_A;
+
+		/* set h/w channel */
+		if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Unable to set channel\n",
+				__func__);
+
+		ath_rate_newstate(sc, avp);
+		/* Update ratectrl about the new state */
+		ath_rc_node_update(hw, avp->rc_node);
+	} else {
+		DPRINTF(sc, ATH_DBG_CONFIG,
+		"%s: Bss Info DISSOC\n", __func__);
+		sc->sc_curaid = 0;
+	}
+}
+
+static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_bss_conf *bss_conf,
+				   u32 changed)
+{
+	struct ath_softc *sc = hw->priv;
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed PREAMBLE %d\n",
+			__func__,
+			bss_conf->use_short_preamble);
+		if (bss_conf->use_short_preamble)
+			sc->sc_flags |= ATH_PREAMBLE_SHORT;
+		else
+			sc->sc_flags &= ~ATH_PREAMBLE_SHORT;
+	}
+
+	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed CTS PROT %d\n",
+			__func__,
+			bss_conf->use_cts_prot);
+		if (bss_conf->use_cts_prot &&
+		    hw->conf.channel->band != IEEE80211_BAND_5GHZ)
+			sc->sc_flags |= ATH_PROTECT_ENABLE;
+		else
+			sc->sc_flags &= ~ATH_PROTECT_ENABLE;
+	}
+
+	if (changed & BSS_CHANGED_HT) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT %d\n",
+			__func__,
+			bss_conf->assoc_ht);
+		ath9k_ht_conf(sc, bss_conf);
+	}
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed ASSOC %d\n",
+			__func__,
+			bss_conf->assoc);
+		ath9k_bss_assoc_info(sc, bss_conf);
+	}
+}
+
+static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
+{
+	u64 tsf;
+	struct ath_softc *sc = hw->priv;
+	struct ath_hal *ah = sc->sc_ah;
+
+	tsf = ath9k_hw_gettsf64(ah);
+
+	return tsf;
+}
+
+static void ath9k_reset_tsf(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_hal *ah = sc->sc_ah;
+
+	ath9k_hw_reset_tsf(ah);
+}
+
+static int ath9k_ampdu_action(struct ieee80211_hw *hw,
+		       enum ieee80211_ampdu_mlme_action action,
+		       const u8 *addr,
+		       u16 tid,
+		       u16 *ssn)
+{
+	struct ath_softc *sc = hw->priv;
+	int ret = 0;
+
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+		ret = ath_rx_aggr_start(sc, addr, tid, ssn);
+		if (ret < 0)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Unable to start RX aggregation\n",
+				__func__);
+		break;
+	case IEEE80211_AMPDU_RX_STOP:
+		ret = ath_rx_aggr_stop(sc, addr, tid);
+		if (ret < 0)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Unable to stop RX aggregation\n",
+				__func__);
+		break;
+	case IEEE80211_AMPDU_TX_START:
+		ret = ath_tx_aggr_start(sc, addr, tid, ssn);
+		if (ret < 0)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Unable to start TX aggregation\n",
+				__func__);
+		else
+			ieee80211_start_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_STOP:
+		ret = ath_tx_aggr_stop(sc, addr, tid);
+		if (ret < 0)
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: Unable to stop TX aggregation\n",
+				__func__);
+
+		ieee80211_stop_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid);
+		break;
+	default:
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Unknown AMPDU action\n", __func__);
+	}
+
+	return ret;
+}
+
+static struct ieee80211_ops ath9k_ops = {
+	.tx 		    = ath9k_tx,
+	.start 		    = ath9k_start,
+	.stop 		    = ath9k_stop,
+	.add_interface 	    = ath9k_add_interface,
+	.remove_interface   = ath9k_remove_interface,
+	.config 	    = ath9k_config,
+	.config_interface   = ath9k_config_interface,
+	.configure_filter   = ath9k_configure_filter,
+	.get_stats          = NULL,
+	.sta_notify         = ath9k_sta_notify,
+	.conf_tx 	    = ath9k_conf_tx,
+	.get_tx_stats 	    = NULL,
+	.bss_info_changed   = ath9k_bss_info_changed,
+	.set_tim            = NULL,
+	.set_key            = ath9k_set_key,
+	.hw_scan            = NULL,
+	.get_tkip_seq       = NULL,
+	.set_rts_threshold  = NULL,
+	.set_frag_threshold = NULL,
+	.set_retry_limit    = NULL,
+	.get_tsf 	    = ath9k_get_tsf,
+	.reset_tsf 	    = ath9k_reset_tsf,
+	.tx_last_beacon     = NULL,
+	.ampdu_action       = ath9k_ampdu_action
+};
+
+void ath_get_beaconconfig(struct ath_softc *sc,
+			  int if_id,
+			  struct ath_beacon_config *conf)
+{
+	struct ieee80211_hw *hw = sc->hw;
+
+	/* fill in beacon config data */
+
+	conf->beacon_interval = hw->conf.beacon_int;
+	conf->listen_interval = 100;
+	conf->dtim_count = 1;
+	conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval;
+}
+
+int ath_update_beacon(struct ath_softc *sc,
+		      int if_id,
+		      struct ath_beacon_offset *bo,
+		      struct sk_buff *skb,
+		      int mcast)
+{
+	return 0;
+}
+
+void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
+		     struct ath_xmit_status *tx_status, struct ath_node *an)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+
+	DPRINTF(sc, ATH_DBG_XMIT,
+		"%s: TX complete: skb: %p\n", __func__, skb);
+
+	if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK ||
+		tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
+		/* free driver's private data area of tx_info */
+		if (tx_info->driver_data[0] != NULL)
+			kfree(tx_info->driver_data[0]);
+			tx_info->driver_data[0] = NULL;
+	}
+
+	if (tx_status->flags & ATH_TX_BAR) {
+		tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
+		tx_status->flags &= ~ATH_TX_BAR;
+	}
+
+	if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) {
+		if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+			/* Frame was not ACKed, but an ACK was expected */
+			tx_info->status.excessive_retries = 1;
+		}
+	} else {
+		/* Frame was ACKed */
+		tx_info->flags |= IEEE80211_TX_STAT_ACK;
+	}
+
+	tx_info->status.retry_count = tx_status->retries;
+
+	ieee80211_tx_status(hw, skb);
+	if (an)
+		ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE);
+}
+
+int ath__rx_indicate(struct ath_softc *sc,
+		     struct sk_buff *skb,
+		     struct ath_recv_status *status,
+		     u16 keyix)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ath_node *an = NULL;
+	struct ieee80211_rx_status rx_status;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+	int padsize;
+	enum ATH_RX_TYPE st;
+
+	/* see if any padding is done by the hw and remove it */
+	if (hdrlen & 3) {
+		padsize = hdrlen % 4;
+		memmove(skb->data + padsize, skb->data, hdrlen);
+		skb_pull(skb, padsize);
+	}
+
+	/* remove FCS before passing up to protocol stack */
+	skb_trim(skb, (skb->len - FCS_LEN));
+
+	/* Prepare rx status */
+	ath9k_rx_prepare(sc, skb, status, &rx_status);
+
+	if (!(keyix == ATH9K_RXKEYIX_INVALID) &&
+	    !(status->flags & ATH_RX_DECRYPT_ERROR)) {
+		rx_status.flag |= RX_FLAG_DECRYPTED;
+	} else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED)
+		   && !(status->flags & ATH_RX_DECRYPT_ERROR)
+		   && skb->len >= hdrlen + 4) {
+		keyix = skb->data[hdrlen + 3] >> 6;
+
+		if (test_bit(keyix, sc->sc_keymap))
+			rx_status.flag |= RX_FLAG_DECRYPTED;
+	}
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, hdr->addr2);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (an) {
+		ath_rx_input(sc, an,
+			     hw->conf.ht_conf.ht_supported,
+			     skb, status, &st);
+	}
+	if (!an || (st != ATH_RX_CONSUMED))
+		__ieee80211_rx(hw, skb, &rx_status);
+
+	return 0;
+}
+
+int ath_rx_subframe(struct ath_node *an,
+		    struct sk_buff *skb,
+		    struct ath_recv_status *status)
+{
+	struct ath_softc *sc = an->an_sc;
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_rx_status rx_status;
+
+	/* Prepare rx status */
+	ath9k_rx_prepare(sc, skb, status, &rx_status);
+	if (!(status->flags & ATH_RX_DECRYPT_ERROR))
+		rx_status.flag |= RX_FLAG_DECRYPTED;
+
+	__ieee80211_rx(hw, skb, &rx_status);
+
+	return 0;
+}
+
+enum ath9k_ht_macmode ath_cwm_macmode(struct ath_softc *sc)
+{
+	return sc->sc_ht_info.tx_chan_width;
+}
+
+static int ath_detach(struct ath_softc *sc)
+{
+	struct ieee80211_hw *hw = sc->hw;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__);
+
+	/* Unregister hw */
+
+	ieee80211_unregister_hw(hw);
+
+	/* unregister Rate control */
+	ath_rate_control_unregister();
+
+	/* tx/rx cleanup */
+
+	ath_rx_cleanup(sc);
+	ath_tx_cleanup(sc);
+
+	/* Deinit */
+
+	ath_deinit(sc);
+
+	return 0;
+}
+
+static int ath_attach(u16 devid,
+		      struct ath_softc *sc)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	int error = 0;
+
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach ATH hw\n", __func__);
+
+	error = ath_init(devid, sc);
+	if (error != 0)
+		return error;
+
+	/* Init nodes */
+
+	INIT_LIST_HEAD(&sc->node_list);
+	spin_lock_init(&sc->node_lock);
+
+	/* get mac address from hardware and set in mac80211 */
+
+	SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr);
+
+	/* setup channels and rates */
+
+	sc->sbands[IEEE80211_BAND_2GHZ].channels =
+		sc->channels[IEEE80211_BAND_2GHZ];
+	sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
+		sc->rates[IEEE80211_BAND_2GHZ];
+	sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
+
+	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
+		/* Setup HT capabilities for 2.4Ghz*/
+		setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info);
+
+	hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+		&sc->sbands[IEEE80211_BAND_2GHZ];
+
+	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) {
+		sc->sbands[IEEE80211_BAND_5GHZ].channels =
+			sc->channels[IEEE80211_BAND_5GHZ];
+		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
+			sc->rates[IEEE80211_BAND_5GHZ];
+		sc->sbands[IEEE80211_BAND_5GHZ].band =
+			IEEE80211_BAND_5GHZ;
+
+		if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
+			/* Setup HT capabilities for 5Ghz*/
+			setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info);
+
+		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+			&sc->sbands[IEEE80211_BAND_5GHZ];
+	}
+
+	/* FIXME: Have to figure out proper hw init values later */
+
+	hw->queues = 4;
+	hw->ampdu_queues = 1;
+
+	/* Register rate control */
+	hw->rate_control_algorithm = "ath9k_rate_control";
+	error = ath_rate_control_register();
+	if (error != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: Unable to register rate control "
+			"algorithm:%d\n", __func__, error);
+		ath_rate_control_unregister();
+		goto bad;
+	}
+
+	error = ieee80211_register_hw(hw);
+	if (error != 0) {
+		ath_rate_control_unregister();
+		goto bad;
+	}
+
+	/* initialize tx/rx engine */
+
+	error = ath_tx_init(sc, ATH_TXBUF);
+	if (error != 0)
+		goto bad1;
+
+	error = ath_rx_init(sc, ATH_RXBUF);
+	if (error != 0)
+		goto bad1;
+
+	return 0;
+bad1:
+	ath_detach(sc);
+bad:
+	return error;
+}
+
+static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	void __iomem *mem;
+	struct ath_softc *sc;
+	struct ieee80211_hw *hw;
+	const char *athname;
+	u8 csz;
+	u32 val;
+	int ret = 0;
+
+	if (pci_enable_device(pdev))
+		return -EIO;
+
+	/* XXX 32-bit addressing only */
+	if (pci_set_dma_mask(pdev, 0xffffffff)) {
+		printk(KERN_ERR "ath_pci: 32-bit DMA not available\n");
+		ret = -ENODEV;
+		goto bad;
+	}
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+	if (csz == 0) {
+		/*
+		 * Linux 2.4.18 (at least) writes the cache line size
+		 * register as a 16-bit wide register which is wrong.
+		 * We must have this setup properly for rx buffer
+		 * DMA to work so force a reasonable value here if it
+		 * comes up zero.
+		 */
+		csz = L1_CACHE_BYTES / sizeof(u32);
+		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+	}
+	/*
+	 * The default setting of latency timer yields poor results,
+	 * set it to the value used by other systems. It may be worth
+	 * tweaking this setting more.
+	 */
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+
+	pci_set_master(pdev);
+
+	/*
+	 * Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state.
+	 */
+	pci_read_config_dword(pdev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
+	ret = pci_request_region(pdev, 0, "ath9k");
+	if (ret) {
+		dev_err(&pdev->dev, "PCI memory region reserve error\n");
+		ret = -ENODEV;
+		goto bad;
+	}
+
+	mem = pci_iomap(pdev, 0, 0);
+	if (!mem) {
+		printk(KERN_ERR "PCI memory map error\n") ;
+		ret = -EIO;
+		goto bad1;
+	}
+
+	hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
+	if (hw == NULL) {
+		printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
+		goto bad2;
+	}
+
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
+		IEEE80211_HW_NOISE_DBM;
+
+	SET_IEEE80211_DEV(hw, &pdev->dev);
+	pci_set_drvdata(pdev, hw);
+
+	sc = hw->priv;
+	sc->hw = hw;
+	sc->pdev = pdev;
+	sc->mem = mem;
+
+	if (ath_attach(id->device, sc) != 0) {
+		ret = -ENODEV;
+		goto bad3;
+	}
+
+	/* setup interrupt service routine */
+
+	if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
+		printk(KERN_ERR "%s: request_irq failed\n",
+			wiphy_name(hw->wiphy));
+		ret = -EIO;
+		goto bad4;
+	}
+
+	athname = ath9k_hw_probe(id->vendor, id->device);
+
+	printk(KERN_INFO "%s: %s: mem=0x%lx, irq=%d\n",
+	       wiphy_name(hw->wiphy),
+	       athname ? athname : "Atheros ???",
+	       (unsigned long)mem, pdev->irq);
+
+	return 0;
+bad4:
+	ath_detach(sc);
+bad3:
+	ieee80211_free_hw(hw);
+bad2:
+	pci_iounmap(pdev, mem);
+bad1:
+	pci_release_region(pdev, 0);
+bad:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void ath_pci_remove(struct pci_dev *pdev)
+{
+	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ath_softc *sc = hw->priv;
+
+	if (pdev->irq)
+		free_irq(pdev->irq, sc);
+	ath_detach(sc);
+	pci_iounmap(pdev, sc->mem);
+	pci_release_region(pdev, 0);
+	pci_disable_device(pdev);
+	ieee80211_free_hw(hw);
+}
+
+#ifdef CONFIG_PM
+
+static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, 3);
+
+	return 0;
+}
+
+static int ath_pci_resume(struct pci_dev *pdev)
+{
+	u32 val;
+	int err;
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+	pci_restore_state(pdev);
+	/*
+	 * Suspend/Resume resets the PCI configuration space, so we have to
+	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state
+	 */
+	pci_read_config_dword(pdev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
+
+static struct pci_driver ath_pci_driver = {
+	.name       = "ath9k",
+	.id_table   = ath_pci_id_table,
+	.probe      = ath_pci_probe,
+	.remove     = ath_pci_remove,
+#ifdef CONFIG_PM
+	.suspend    = ath_pci_suspend,
+	.resume     = ath_pci_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init init_ath_pci(void)
+{
+	printk(KERN_INFO "%s: %s\n", dev_info, ATH_PCI_VERSION);
+
+	if (pci_register_driver(&ath_pci_driver) < 0) {
+		printk(KERN_ERR
+			"ath_pci: No devices found, driver not installed.\n");
+		pci_unregister_driver(&ath_pci_driver);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+module_init(init_ath_pci);
+
+static void __exit exit_ath_pci(void)
+{
+	pci_unregister_driver(&ath_pci_driver);
+	printk(KERN_INFO "%s: driver unloaded\n", dev_info);
+}
+module_exit(exit_ath_pci);
diff --git a/drivers/net/wireless/ath9k/phy.c b/drivers/net/wireless/ath9k/phy.c
new file mode 100644
index 00000000000..eb9121fdfd3
--- /dev/null
+++ b/drivers/net/wireless/ath9k/phy.c
@@ -0,0 +1,436 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "core.h"
+#include "hw.h"
+#include "reg.h"
+#include "phy.h"
+
+void
+ath9k_hw_write_regs(struct ath_hal *ah, u32 modesIndex, u32 freqIndex,
+		    int regWrites)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	REG_WRITE_ARRAY(&ahp->ah_iniBB_RfGain, freqIndex, regWrites);
+}
+
+bool
+ath9k_hw_set_channel(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	u32 channelSel = 0;
+	u32 bModeSynth = 0;
+	u32 aModeRefSel = 0;
+	u32 reg32 = 0;
+	u16 freq;
+	struct chan_centers centers;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	if (freq < 4800) {
+		u32 txctl;
+
+		if (((freq - 2192) % 5) == 0) {
+			channelSel = ((freq - 672) * 2 - 3040) / 10;
+			bModeSynth = 0;
+		} else if (((freq - 2224) % 5) == 0) {
+			channelSel = ((freq - 704) * 2 - 3040) / 10;
+			bModeSynth = 1;
+		} else {
+			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+				 "%s: invalid channel %u MHz\n", __func__,
+				 freq);
+			return false;
+		}
+
+		channelSel = (channelSel << 2) & 0xff;
+		channelSel = ath9k_hw_reverse_bits(channelSel, 8);
+
+		txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
+		if (freq == 2484) {
+
+			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+				  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
+		} else {
+			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+				  txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
+		}
+
+	} else if ((freq % 20) == 0 && freq >= 5120) {
+		channelSel =
+		    ath9k_hw_reverse_bits(((freq - 4800) / 20 << 2), 8);
+		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
+	} else if ((freq % 10) == 0) {
+		channelSel =
+		    ath9k_hw_reverse_bits(((freq - 4800) / 10 << 1), 8);
+		if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah))
+			aModeRefSel = ath9k_hw_reverse_bits(2, 2);
+		else
+			aModeRefSel = ath9k_hw_reverse_bits(1, 2);
+	} else if ((freq % 5) == 0) {
+		channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8);
+		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
+	} else {
+		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			 "%s: invalid channel %u MHz\n", __func__, freq);
+		return false;
+	}
+
+	reg32 =
+	    (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) |
+	    (1 << 5) | 0x1;
+
+	REG_WRITE(ah, AR_PHY(0x37), reg32);
+
+	ah->ah_curchan = chan;
+
+	AH5416(ah)->ah_curchanRadIndex = -1;
+
+	return true;
+}
+
+bool
+ath9k_hw_ar9280_set_channel(struct ath_hal *ah,
+			    struct ath9k_channel *chan)
+{
+	u16 bMode, fracMode, aModeRefSel = 0;
+	u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0;
+	struct chan_centers centers;
+	u32 refDivA = 24;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL);
+	reg32 &= 0xc0000000;
+
+	if (freq < 4800) {
+		u32 txctl;
+
+		bMode = 1;
+		fracMode = 1;
+		aModeRefSel = 0;
+		channelSel = (freq * 0x10000) / 15;
+
+		txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
+		if (freq == 2484) {
+
+			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+				  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
+		} else {
+			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+				  txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
+		}
+	} else {
+		bMode = 0;
+		fracMode = 0;
+
+		if ((freq % 20) == 0) {
+			aModeRefSel = 3;
+		} else if ((freq % 10) == 0) {
+			aModeRefSel = 2;
+		} else {
+			aModeRefSel = 0;
+
+			fracMode = 1;
+			refDivA = 1;
+			channelSel = (freq * 0x8000) / 15;
+
+			REG_RMW_FIELD(ah, AR_AN_SYNTH9,
+				      AR_AN_SYNTH9_REFDIVA, refDivA);
+		}
+		if (!fracMode) {
+			ndiv = (freq * (refDivA >> aModeRefSel)) / 60;
+			channelSel = ndiv & 0x1ff;
+			channelFrac = (ndiv & 0xfffffe00) * 2;
+			channelSel = (channelSel << 17) | channelFrac;
+		}
+	}
+
+	reg32 = reg32 |
+	    (bMode << 29) |
+	    (fracMode << 28) | (aModeRefSel << 26) | (channelSel);
+
+	REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32);
+
+	ah->ah_curchan = chan;
+
+	AH5416(ah)->ah_curchanRadIndex = -1;
+
+	return true;
+}
+
+static void
+ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32,
+			   u32 numBits, u32 firstBit,
+			   u32 column)
+{
+	u32 tmp32, mask, arrayEntry, lastBit;
+	int32_t bitPosition, bitsLeft;
+
+	tmp32 = ath9k_hw_reverse_bits(reg32, numBits);
+	arrayEntry = (firstBit - 1) / 8;
+	bitPosition = (firstBit - 1) % 8;
+	bitsLeft = numBits;
+	while (bitsLeft > 0) {
+		lastBit = (bitPosition + bitsLeft > 8) ?
+		    8 : bitPosition + bitsLeft;
+		mask = (((1 << lastBit) - 1) ^ ((1 << bitPosition) - 1)) <<
+		    (column * 8);
+		rfBuf[arrayEntry] &= ~mask;
+		rfBuf[arrayEntry] |= ((tmp32 << bitPosition) <<
+				      (column * 8)) & mask;
+		bitsLeft -= 8 - bitPosition;
+		tmp32 = tmp32 >> (8 - bitPosition);
+		bitPosition = 0;
+		arrayEntry++;
+	}
+}
+
+bool
+ath9k_hw_set_rf_regs(struct ath_hal *ah, struct ath9k_channel *chan,
+		     u16 modesIndex)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	u32 eepMinorRev;
+	u32 ob5GHz = 0, db5GHz = 0;
+	u32 ob2GHz = 0, db2GHz = 0;
+	int regWrites = 0;
+
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		return true;
+
+	eepMinorRev = ath9k_hw_get_eeprom(ahp, EEP_MINOR_REV);
+
+	RF_BANK_SETUP(ahp->ah_analogBank0Data, &ahp->ah_iniBank0, 1);
+
+	RF_BANK_SETUP(ahp->ah_analogBank1Data, &ahp->ah_iniBank1, 1);
+
+	RF_BANK_SETUP(ahp->ah_analogBank2Data, &ahp->ah_iniBank2, 1);
+
+	RF_BANK_SETUP(ahp->ah_analogBank3Data, &ahp->ah_iniBank3,
+		      modesIndex);
+	{
+		int i;
+		for (i = 0; i < ahp->ah_iniBank6TPC.ia_rows; i++) {
+			ahp->ah_analogBank6Data[i] =
+			    INI_RA(&ahp->ah_iniBank6TPC, i, modesIndex);
+		}
+	}
+
+	if (eepMinorRev >= 2) {
+		if (IS_CHAN_2GHZ(chan)) {
+			ob2GHz = ath9k_hw_get_eeprom(ahp, EEP_OB_2);
+			db2GHz = ath9k_hw_get_eeprom(ahp, EEP_DB_2);
+			ath9k_phy_modify_rx_buffer(ahp->ah_analogBank6Data,
+						   ob2GHz, 3, 197, 0);
+			ath9k_phy_modify_rx_buffer(ahp->ah_analogBank6Data,
+						   db2GHz, 3, 194, 0);
+		} else {
+			ob5GHz = ath9k_hw_get_eeprom(ahp, EEP_OB_5);
+			db5GHz = ath9k_hw_get_eeprom(ahp, EEP_DB_5);
+			ath9k_phy_modify_rx_buffer(ahp->ah_analogBank6Data,
+						   ob5GHz, 3, 203, 0);
+			ath9k_phy_modify_rx_buffer(ahp->ah_analogBank6Data,
+						   db5GHz, 3, 200, 0);
+		}
+	}
+
+	RF_BANK_SETUP(ahp->ah_analogBank7Data, &ahp->ah_iniBank7, 1);
+
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank0, ahp->ah_analogBank0Data,
+			   regWrites);
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank1, ahp->ah_analogBank1Data,
+			   regWrites);
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank2, ahp->ah_analogBank2Data,
+			   regWrites);
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank3, ahp->ah_analogBank3Data,
+			   regWrites);
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank6TPC, ahp->ah_analogBank6Data,
+			   regWrites);
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank7, ahp->ah_analogBank7Data,
+			   regWrites);
+
+	return true;
+}
+
+void
+ath9k_hw_rfdetach(struct ath_hal *ah)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (ahp->ah_analogBank0Data != NULL) {
+		kfree(ahp->ah_analogBank0Data);
+		ahp->ah_analogBank0Data = NULL;
+	}
+	if (ahp->ah_analogBank1Data != NULL) {
+		kfree(ahp->ah_analogBank1Data);
+		ahp->ah_analogBank1Data = NULL;
+	}
+	if (ahp->ah_analogBank2Data != NULL) {
+		kfree(ahp->ah_analogBank2Data);
+		ahp->ah_analogBank2Data = NULL;
+	}
+	if (ahp->ah_analogBank3Data != NULL) {
+		kfree(ahp->ah_analogBank3Data);
+		ahp->ah_analogBank3Data = NULL;
+	}
+	if (ahp->ah_analogBank6Data != NULL) {
+		kfree(ahp->ah_analogBank6Data);
+		ahp->ah_analogBank6Data = NULL;
+	}
+	if (ahp->ah_analogBank6TPCData != NULL) {
+		kfree(ahp->ah_analogBank6TPCData);
+		ahp->ah_analogBank6TPCData = NULL;
+	}
+	if (ahp->ah_analogBank7Data != NULL) {
+		kfree(ahp->ah_analogBank7Data);
+		ahp->ah_analogBank7Data = NULL;
+	}
+	if (ahp->ah_addac5416_21 != NULL) {
+		kfree(ahp->ah_addac5416_21);
+		ahp->ah_addac5416_21 = NULL;
+	}
+	if (ahp->ah_bank6Temp != NULL) {
+		kfree(ahp->ah_bank6Temp);
+		ahp->ah_bank6Temp = NULL;
+	}
+}
+
+bool ath9k_hw_init_rf(struct ath_hal *ah, int *status)
+{
+	struct ath_hal_5416 *ahp = AH5416(ah);
+
+	if (!AR_SREV_9280_10_OR_LATER(ah)) {
+
+		ahp->ah_analogBank0Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank0.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank1Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank1.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank2Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank2.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank3Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank3.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank6Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank6.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank6TPCData =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank6TPC.ia_rows), GFP_KERNEL);
+		ahp->ah_analogBank7Data =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank7.ia_rows), GFP_KERNEL);
+
+		if (ahp->ah_analogBank0Data == NULL
+		    || ahp->ah_analogBank1Data == NULL
+		    || ahp->ah_analogBank2Data == NULL
+		    || ahp->ah_analogBank3Data == NULL
+		    || ahp->ah_analogBank6Data == NULL
+		    || ahp->ah_analogBank6TPCData == NULL
+		    || ahp->ah_analogBank7Data == NULL) {
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				 "%s: cannot allocate RF banks\n",
+				 __func__);
+			*status = -ENOMEM;
+			return false;
+		}
+
+		ahp->ah_addac5416_21 =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniAddac.ia_rows *
+			     ahp->ah_iniAddac.ia_columns), GFP_KERNEL);
+		if (ahp->ah_addac5416_21 == NULL) {
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				 "%s: cannot allocate ah_addac5416_21\n",
+				 __func__);
+			*status = -ENOMEM;
+			return false;
+		}
+
+		ahp->ah_bank6Temp =
+		    kzalloc((sizeof(u32) *
+			     ahp->ah_iniBank6.ia_rows), GFP_KERNEL);
+		if (ahp->ah_bank6Temp == NULL) {
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				 "%s: cannot allocate ah_bank6Temp\n",
+				 __func__);
+			*status = -ENOMEM;
+			return false;
+		}
+	}
+
+	return true;
+}
+
+void
+ath9k_hw_decrease_chain_power(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	int i, regWrites = 0;
+	struct ath_hal_5416 *ahp = AH5416(ah);
+	u32 bank6SelMask;
+	u32 *bank6Temp = ahp->ah_bank6Temp;
+
+	switch (ahp->ah_diversityControl) {
+	case ATH9K_ANT_FIXED_A:
+		bank6SelMask =
+		    (ahp->
+		     ah_antennaSwitchSwap & ANTSWAP_AB) ? REDUCE_CHAIN_0 :
+		    REDUCE_CHAIN_1;
+		break;
+	case ATH9K_ANT_FIXED_B:
+		bank6SelMask =
+		    (ahp->
+		     ah_antennaSwitchSwap & ANTSWAP_AB) ? REDUCE_CHAIN_1 :
+		    REDUCE_CHAIN_0;
+		break;
+	case ATH9K_ANT_VARIABLE:
+		return;
+		break;
+	default:
+		return;
+		break;
+	}
+
+	for (i = 0; i < ahp->ah_iniBank6.ia_rows; i++)
+		bank6Temp[i] = ahp->ah_analogBank6Data[i];
+
+	REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask);
+
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0);
+
+	REG_WRITE_RF_ARRAY(&ahp->ah_iniBank6, bank6Temp, regWrites);
+
+	REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053);
+#ifdef ALTER_SWITCH
+	REG_WRITE(ah, PHY_SWITCH_CHAIN_0,
+		  (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38)
+		  | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38));
+#endif
+}
diff --git a/drivers/net/wireless/ath9k/phy.h b/drivers/net/wireless/ath9k/phy.h
new file mode 100644
index 00000000000..0cd399a5344
--- /dev/null
+++ b/drivers/net/wireless/ath9k/phy.h
@@ -0,0 +1,543 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef PHY_H
+#define PHY_H
+
+bool ath9k_hw_ar9280_set_channel(struct ath_hal *ah,
+					  struct ath9k_channel
+					  *chan);
+bool ath9k_hw_set_channel(struct ath_hal *ah,
+				   struct ath9k_channel *chan);
+void ath9k_hw_write_regs(struct ath_hal *ah, u32 modesIndex,
+			 u32 freqIndex, int regWrites);
+bool ath9k_hw_set_rf_regs(struct ath_hal *ah,
+				   struct ath9k_channel *chan,
+				   u16 modesIndex);
+void ath9k_hw_decrease_chain_power(struct ath_hal *ah,
+				   struct ath9k_channel *chan);
+bool ath9k_hw_init_rf(struct ath_hal *ah,
+			       int *status);
+
+#define AR_PHY_BASE     0x9800
+#define AR_PHY(_n)      (AR_PHY_BASE + ((_n)<<2))
+
+#define AR_PHY_TEST             0x9800
+#define PHY_AGC_CLR             0x10000000
+#define RFSILENT_BB             0x00002000
+
+#define AR_PHY_TURBO                0x9804
+#define AR_PHY_FC_TURBO_MODE        0x00000001
+#define AR_PHY_FC_TURBO_SHORT       0x00000002
+#define AR_PHY_FC_DYN2040_EN        0x00000004
+#define AR_PHY_FC_DYN2040_PRI_ONLY  0x00000008
+#define AR_PHY_FC_DYN2040_PRI_CH    0x00000010
+#define AR_PHY_FC_DYN2040_EXT_CH    0x00000020
+#define AR_PHY_FC_HT_EN             0x00000040
+#define AR_PHY_FC_SHORT_GI_40       0x00000080
+#define AR_PHY_FC_WALSH             0x00000100
+#define AR_PHY_FC_SINGLE_HT_LTF1    0x00000200
+
+#define AR_PHY_TIMING2           0x9810
+#define AR_PHY_TIMING3           0x9814
+#define AR_PHY_TIMING3_DSC_MAN   0xFFFE0000
+#define AR_PHY_TIMING3_DSC_MAN_S 17
+#define AR_PHY_TIMING3_DSC_EXP   0x0001E000
+#define AR_PHY_TIMING3_DSC_EXP_S 13
+
+#define AR_PHY_CHIP_ID            0x9818
+#define AR_PHY_CHIP_ID_REV_0      0x80
+#define AR_PHY_CHIP_ID_REV_1      0x81
+#define AR_PHY_CHIP_ID_9160_REV_0 0xb0
+
+#define AR_PHY_ACTIVE       0x981C
+#define AR_PHY_ACTIVE_EN    0x00000001
+#define AR_PHY_ACTIVE_DIS   0x00000000
+
+#define AR_PHY_RF_CTL2             0x9824
+#define AR_PHY_TX_END_DATA_START   0x000000FF
+#define AR_PHY_TX_END_DATA_START_S 0
+#define AR_PHY_TX_END_PA_ON        0x0000FF00
+#define AR_PHY_TX_END_PA_ON_S      8
+
+#define AR_PHY_RF_CTL3                  0x9828
+#define AR_PHY_TX_END_TO_A2_RX_ON       0x00FF0000
+#define AR_PHY_TX_END_TO_A2_RX_ON_S     16
+
+#define AR_PHY_ADC_CTL                  0x982C
+#define AR_PHY_ADC_CTL_OFF_INBUFGAIN    0x00000003
+#define AR_PHY_ADC_CTL_OFF_INBUFGAIN_S  0
+#define AR_PHY_ADC_CTL_OFF_PWDDAC       0x00002000
+#define AR_PHY_ADC_CTL_OFF_PWDBANDGAP   0x00004000
+#define AR_PHY_ADC_CTL_OFF_PWDADC       0x00008000
+#define AR_PHY_ADC_CTL_ON_INBUFGAIN     0x00030000
+#define AR_PHY_ADC_CTL_ON_INBUFGAIN_S   16
+
+#define AR_PHY_ADC_SERIAL_CTL       0x9830
+#define AR_PHY_SEL_INTERNAL_ADDAC   0x00000000
+#define AR_PHY_SEL_EXTERNAL_RADIO   0x00000001
+
+#define AR_PHY_RF_CTL4                    0x9834
+#define AR_PHY_RF_CTL4_TX_END_XPAB_OFF    0xFF000000
+#define AR_PHY_RF_CTL4_TX_END_XPAB_OFF_S  24
+#define AR_PHY_RF_CTL4_TX_END_XPAA_OFF    0x00FF0000
+#define AR_PHY_RF_CTL4_TX_END_XPAA_OFF_S  16
+#define AR_PHY_RF_CTL4_FRAME_XPAB_ON      0x0000FF00
+#define AR_PHY_RF_CTL4_FRAME_XPAB_ON_S    8
+#define AR_PHY_RF_CTL4_FRAME_XPAA_ON      0x000000FF
+#define AR_PHY_RF_CTL4_FRAME_XPAA_ON_S    0
+
+#define AR_PHY_SETTLING          0x9844
+#define AR_PHY_SETTLING_SWITCH   0x00003F80
+#define AR_PHY_SETTLING_SWITCH_S 7
+
+#define AR_PHY_RXGAIN                   0x9848
+#define AR_PHY_RXGAIN_TXRX_ATTEN        0x0003F000
+#define AR_PHY_RXGAIN_TXRX_ATTEN_S      12
+#define AR_PHY_RXGAIN_TXRX_RF_MAX       0x007C0000
+#define AR_PHY_RXGAIN_TXRX_RF_MAX_S     18
+#define AR9280_PHY_RXGAIN_TXRX_ATTEN    0x00003F80
+#define AR9280_PHY_RXGAIN_TXRX_ATTEN_S  7
+#define AR9280_PHY_RXGAIN_TXRX_MARGIN   0x001FC000
+#define AR9280_PHY_RXGAIN_TXRX_MARGIN_S 14
+
+#define AR_PHY_DESIRED_SZ           0x9850
+#define AR_PHY_DESIRED_SZ_ADC       0x000000FF
+#define AR_PHY_DESIRED_SZ_ADC_S     0
+#define AR_PHY_DESIRED_SZ_PGA       0x0000FF00
+#define AR_PHY_DESIRED_SZ_PGA_S     8
+#define AR_PHY_DESIRED_SZ_TOT_DES   0x0FF00000
+#define AR_PHY_DESIRED_SZ_TOT_DES_S 20
+
+#define AR_PHY_FIND_SIG           0x9858
+#define AR_PHY_FIND_SIG_FIRSTEP   0x0003F000
+#define AR_PHY_FIND_SIG_FIRSTEP_S 12
+#define AR_PHY_FIND_SIG_FIRPWR    0x03FC0000
+#define AR_PHY_FIND_SIG_FIRPWR_S  18
+
+#define AR_PHY_AGC_CTL1                  0x985C
+#define AR_PHY_AGC_CTL1_COARSE_LOW       0x00007F80
+#define AR_PHY_AGC_CTL1_COARSE_LOW_S     7
+#define AR_PHY_AGC_CTL1_COARSE_HIGH      0x003F8000
+#define AR_PHY_AGC_CTL1_COARSE_HIGH_S    15
+
+#define AR_PHY_AGC_CONTROL               0x9860
+#define AR_PHY_AGC_CONTROL_CAL           0x00000001
+#define AR_PHY_AGC_CONTROL_NF            0x00000002
+#define AR_PHY_AGC_CONTROL_ENABLE_NF     0x00008000
+#define AR_PHY_AGC_CONTROL_FLTR_CAL      0x00010000
+#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF  0x00020000
+
+#define AR_PHY_CCA                  0x9864
+#define AR_PHY_MINCCA_PWR           0x0FF80000
+#define AR_PHY_MINCCA_PWR_S         19
+#define AR_PHY_CCA_THRESH62         0x0007F000
+#define AR_PHY_CCA_THRESH62_S       12
+#define AR9280_PHY_MINCCA_PWR       0x1FF00000
+#define AR9280_PHY_MINCCA_PWR_S     20
+#define AR9280_PHY_CCA_THRESH62     0x000FF000
+#define AR9280_PHY_CCA_THRESH62_S   12
+
+#define AR_PHY_SFCORR_LOW                    0x986C
+#define AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW  0x00000001
+#define AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW    0x00003F00
+#define AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW_S  8
+#define AR_PHY_SFCORR_LOW_M1_THRESH_LOW      0x001FC000
+#define AR_PHY_SFCORR_LOW_M1_THRESH_LOW_S    14
+#define AR_PHY_SFCORR_LOW_M2_THRESH_LOW      0x0FE00000
+#define AR_PHY_SFCORR_LOW_M2_THRESH_LOW_S    21
+
+#define AR_PHY_SFCORR                0x9868
+#define AR_PHY_SFCORR_M2COUNT_THR    0x0000001F
+#define AR_PHY_SFCORR_M2COUNT_THR_S  0
+#define AR_PHY_SFCORR_M1_THRESH      0x00FE0000
+#define AR_PHY_SFCORR_M1_THRESH_S    17
+#define AR_PHY_SFCORR_M2_THRESH      0x7F000000
+#define AR_PHY_SFCORR_M2_THRESH_S    24
+
+#define AR_PHY_SLEEP_CTR_CONTROL    0x9870
+#define AR_PHY_SLEEP_CTR_LIMIT      0x9874
+#define AR_PHY_SYNTH_CONTROL        0x9874
+#define AR_PHY_SLEEP_SCAL           0x9878
+
+#define AR_PHY_PLL_CTL          0x987c
+#define AR_PHY_PLL_CTL_40       0xaa
+#define AR_PHY_PLL_CTL_40_5413  0x04
+#define AR_PHY_PLL_CTL_44       0xab
+#define AR_PHY_PLL_CTL_44_2133  0xeb
+#define AR_PHY_PLL_CTL_40_2133  0xea
+
+#define AR_PHY_RX_DELAY           0x9914
+#define AR_PHY_SEARCH_START_DELAY 0x9918
+#define AR_PHY_RX_DELAY_DELAY     0x00003FFF
+
+#define AR_PHY_TIMING_CTRL4(_i)     (0x9920 + ((_i) << 12))
+#define AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF 0x01F
+#define AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF_S   0
+#define AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF 0x7E0
+#define AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF_S   5
+#define AR_PHY_TIMING_CTRL4_IQCORR_ENABLE   0x800
+#define AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX 0xF000
+#define AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX_S   12
+#define AR_PHY_TIMING_CTRL4_DO_CAL    0x10000
+
+#define AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI	0x80000000
+#define	AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER	0x40000000
+#define	AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK	0x20000000
+#define	AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK	0x10000000
+
+#define AR_PHY_TIMING5               0x9924
+#define AR_PHY_TIMING5_CYCPWR_THR1   0x000000FE
+#define AR_PHY_TIMING5_CYCPWR_THR1_S 1
+
+#define AR_PHY_POWER_TX_RATE1               0x9934
+#define AR_PHY_POWER_TX_RATE2               0x9938
+#define AR_PHY_POWER_TX_RATE_MAX            0x993c
+#define AR_PHY_POWER_TX_RATE_MAX_TPC_ENABLE 0x00000040
+
+#define AR_PHY_FRAME_CTL            0x9944
+#define AR_PHY_FRAME_CTL_TX_CLIP    0x00000038
+#define AR_PHY_FRAME_CTL_TX_CLIP_S  3
+
+#define AR_PHY_TXPWRADJ                   0x994C
+#define AR_PHY_TXPWRADJ_CCK_GAIN_DELTA    0x00000FC0
+#define AR_PHY_TXPWRADJ_CCK_GAIN_DELTA_S  6
+#define AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX   0x00FC0000
+#define AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX_S 18
+
+#define AR_PHY_RADAR_EXT      0x9940
+#define AR_PHY_RADAR_EXT_ENA  0x00004000
+
+#define AR_PHY_RADAR_0          0x9954
+#define AR_PHY_RADAR_0_ENA      0x00000001
+#define AR_PHY_RADAR_0_FFT_ENA  0x80000000
+#define AR_PHY_RADAR_0_INBAND   0x0000003e
+#define AR_PHY_RADAR_0_INBAND_S 1
+#define AR_PHY_RADAR_0_PRSSI    0x00000FC0
+#define AR_PHY_RADAR_0_PRSSI_S  6
+#define AR_PHY_RADAR_0_HEIGHT   0x0003F000
+#define AR_PHY_RADAR_0_HEIGHT_S 12
+#define AR_PHY_RADAR_0_RRSSI    0x00FC0000
+#define AR_PHY_RADAR_0_RRSSI_S  18
+#define AR_PHY_RADAR_0_FIRPWR   0x7F000000
+#define AR_PHY_RADAR_0_FIRPWR_S 24
+
+#define AR_PHY_RADAR_1                  0x9958
+#define AR_PHY_RADAR_1_RELPWR_ENA       0x00800000
+#define AR_PHY_RADAR_1_USE_FIR128       0x00400000
+#define AR_PHY_RADAR_1_RELPWR_THRESH    0x003F0000
+#define AR_PHY_RADAR_1_RELPWR_THRESH_S  16
+#define AR_PHY_RADAR_1_BLOCK_CHECK      0x00008000
+#define AR_PHY_RADAR_1_MAX_RRSSI        0x00004000
+#define AR_PHY_RADAR_1_RELSTEP_CHECK    0x00002000
+#define AR_PHY_RADAR_1_RELSTEP_THRESH   0x00001F00
+#define AR_PHY_RADAR_1_RELSTEP_THRESH_S 8
+#define AR_PHY_RADAR_1_MAXLEN           0x000000FF
+#define AR_PHY_RADAR_1_MAXLEN_S         0
+
+#define AR_PHY_SWITCH_CHAIN_0     0x9960
+#define AR_PHY_SWITCH_COM         0x9964
+
+#define AR_PHY_SIGMA_DELTA            0x996C
+#define AR_PHY_SIGMA_DELTA_ADC_SEL    0x00000003
+#define AR_PHY_SIGMA_DELTA_ADC_SEL_S  0
+#define AR_PHY_SIGMA_DELTA_FILT2      0x000000F8
+#define AR_PHY_SIGMA_DELTA_FILT2_S    3
+#define AR_PHY_SIGMA_DELTA_FILT1      0x00001F00
+#define AR_PHY_SIGMA_DELTA_FILT1_S    8
+#define AR_PHY_SIGMA_DELTA_ADC_CLIP   0x01FFE000
+#define AR_PHY_SIGMA_DELTA_ADC_CLIP_S 13
+
+#define AR_PHY_RESTART          0x9970
+#define AR_PHY_RESTART_DIV_GC   0x001C0000
+#define AR_PHY_RESTART_DIV_GC_S 18
+
+#define AR_PHY_RFBUS_REQ        0x997C
+#define AR_PHY_RFBUS_REQ_EN     0x00000001
+
+#define	AR_PHY_TIMING7		        0x9980
+#define	AR_PHY_TIMING8		        0x9984
+#define	AR_PHY_TIMING8_PILOT_MASK_2	0x000FFFFF
+#define	AR_PHY_TIMING8_PILOT_MASK_2_S	0
+
+#define	AR_PHY_BIN_MASK2_1	0x9988
+#define	AR_PHY_BIN_MASK2_2	0x998c
+#define	AR_PHY_BIN_MASK2_3	0x9990
+#define	AR_PHY_BIN_MASK2_4	0x9994
+
+#define	AR_PHY_BIN_MASK_1	0x9900
+#define	AR_PHY_BIN_MASK_2	0x9904
+#define	AR_PHY_BIN_MASK_3	0x9908
+
+#define	AR_PHY_MASK_CTL		0x990c
+
+#define	AR_PHY_BIN_MASK2_4_MASK_4	0x00003FFF
+#define	AR_PHY_BIN_MASK2_4_MASK_4_S	0
+
+#define	AR_PHY_TIMING9		        0x9998
+#define	AR_PHY_TIMING10		        0x999c
+#define	AR_PHY_TIMING10_PILOT_MASK_2	0x000FFFFF
+#define	AR_PHY_TIMING10_PILOT_MASK_2_S	0
+
+#define	AR_PHY_TIMING11			        0x99a0
+#define	AR_PHY_TIMING11_SPUR_DELTA_PHASE	0x000FFFFF
+#define	AR_PHY_TIMING11_SPUR_DELTA_PHASE_S	0
+#define	AR_PHY_TIMING11_SPUR_FREQ_SD		0x3FF00000
+#define	AR_PHY_TIMING11_SPUR_FREQ_SD_S		20
+#define AR_PHY_TIMING11_USE_SPUR_IN_AGC		0x40000000
+#define AR_PHY_TIMING11_USE_SPUR_IN_SELFCOR	0x80000000
+
+#define AR_PHY_RX_CHAINMASK     0x99a4
+#define AR_PHY_NEW_ADC_DC_GAIN_CORR(_i) (0x99b4 + ((_i) << 12))
+#define AR_PHY_NEW_ADC_GAIN_CORR_ENABLE 0x40000000
+#define AR_PHY_NEW_ADC_DC_OFFSET_CORR_ENABLE 0x80000000
+#define AR_PHY_MULTICHAIN_GAIN_CTL  0x99ac
+
+#define AR_PHY_EXT_CCA0             0x99b8
+#define AR_PHY_EXT_CCA0_THRESH62    0x000000FF
+#define AR_PHY_EXT_CCA0_THRESH62_S  0
+
+#define AR_PHY_EXT_CCA                  0x99bc
+#define AR_PHY_EXT_CCA_CYCPWR_THR1      0x0000FE00
+#define AR_PHY_EXT_CCA_CYCPWR_THR1_S    9
+#define AR_PHY_EXT_CCA_THRESH62         0x007F0000
+#define AR_PHY_EXT_CCA_THRESH62_S       16
+#define AR_PHY_EXT_MINCCA_PWR           0xFF800000
+#define AR_PHY_EXT_MINCCA_PWR_S         23
+#define AR9280_PHY_EXT_MINCCA_PWR       0x01FF0000
+#define AR9280_PHY_EXT_MINCCA_PWR_S     16
+
+#define AR_PHY_SFCORR_EXT                 0x99c0
+#define AR_PHY_SFCORR_EXT_M1_THRESH       0x0000007F
+#define AR_PHY_SFCORR_EXT_M1_THRESH_S     0
+#define AR_PHY_SFCORR_EXT_M2_THRESH       0x00003F80
+#define AR_PHY_SFCORR_EXT_M2_THRESH_S     7
+#define AR_PHY_SFCORR_EXT_M1_THRESH_LOW   0x001FC000
+#define AR_PHY_SFCORR_EXT_M1_THRESH_LOW_S 14
+#define AR_PHY_SFCORR_EXT_M2_THRESH_LOW   0x0FE00000
+#define AR_PHY_SFCORR_EXT_M2_THRESH_LOW_S 21
+#define AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S   28
+
+#define AR_PHY_HALFGI           0x99D0
+#define AR_PHY_HALFGI_DSC_MAN   0x0007FFF0
+#define AR_PHY_HALFGI_DSC_MAN_S 4
+#define AR_PHY_HALFGI_DSC_EXP   0x0000000F
+#define AR_PHY_HALFGI_DSC_EXP_S 0
+
+#define AR_PHY_CHAN_INFO_MEMORY               0x99DC
+#define AR_PHY_CHAN_INFO_MEMORY_CAPTURE_MASK  0x0001
+
+#define AR_PHY_HEAVY_CLIP_ENABLE         0x99E0
+
+#define AR_PHY_M_SLEEP      0x99f0
+#define AR_PHY_REFCLKDLY    0x99f4
+#define AR_PHY_REFCLKPD     0x99f8
+
+#define AR_PHY_CALMODE      0x99f0
+
+#define AR_PHY_CALMODE_IQ           0x00000000
+#define AR_PHY_CALMODE_ADC_GAIN     0x00000001
+#define AR_PHY_CALMODE_ADC_DC_PER   0x00000002
+#define AR_PHY_CALMODE_ADC_DC_INIT  0x00000003
+
+#define AR_PHY_CAL_MEAS_0(_i)     (0x9c10 + ((_i) << 12))
+#define AR_PHY_CAL_MEAS_1(_i)     (0x9c14 + ((_i) << 12))
+#define AR_PHY_CAL_MEAS_2(_i)     (0x9c18 + ((_i) << 12))
+#define AR_PHY_CAL_MEAS_3(_i)     (0x9c1c + ((_i) << 12))
+
+#define AR_PHY_CURRENT_RSSI 0x9c1c
+#define AR9280_PHY_CURRENT_RSSI 0x9c3c
+
+#define AR_PHY_RFBUS_GRANT       0x9C20
+#define AR_PHY_RFBUS_GRANT_EN    0x00000001
+
+#define AR_PHY_CHAN_INFO_GAIN_DIFF             0x9CF4
+#define AR_PHY_CHAN_INFO_GAIN_DIFF_UPPER_LIMIT 320
+
+#define AR_PHY_CHAN_INFO_GAIN          0x9CFC
+
+#define AR_PHY_MODE         0xA200
+#define AR_PHY_MODE_AR2133  0x08
+#define AR_PHY_MODE_AR5111  0x00
+#define AR_PHY_MODE_AR5112  0x08
+#define AR_PHY_MODE_DYNAMIC 0x04
+#define AR_PHY_MODE_RF2GHZ  0x02
+#define AR_PHY_MODE_RF5GHZ  0x00
+#define AR_PHY_MODE_CCK     0x01
+#define AR_PHY_MODE_OFDM    0x00
+#define AR_PHY_MODE_DYN_CCK_DISABLE 0x100
+
+#define AR_PHY_CCK_TX_CTRL       0xA204
+#define AR_PHY_CCK_TX_CTRL_JAPAN 0x00000010
+
+#define AR_PHY_CCK_DETECT                           0xA208
+#define AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK          0x0000003F
+#define AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK_S        0
+/* [12:6] settling time for antenna switch */
+#define AR_PHY_CCK_DETECT_ANT_SWITCH_TIME           0x00001FC0
+#define AR_PHY_CCK_DETECT_ANT_SWITCH_TIME_S         6
+#define AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV    0x2000
+
+#define AR_PHY_GAIN_2GHZ                0xA20C
+#define AR_PHY_GAIN_2GHZ_RXTX_MARGIN    0x00FC0000
+#define AR_PHY_GAIN_2GHZ_RXTX_MARGIN_S  18
+#define AR_PHY_GAIN_2GHZ_BSW_MARGIN     0x00003C00
+#define AR_PHY_GAIN_2GHZ_BSW_MARGIN_S   10
+#define AR_PHY_GAIN_2GHZ_BSW_ATTEN      0x0000001F
+#define AR_PHY_GAIN_2GHZ_BSW_ATTEN_S    0
+
+#define AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN     0x003E0000
+#define AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN_S   17
+#define AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN     0x0001F000
+#define AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN_S   12
+#define AR_PHY_GAIN_2GHZ_XATTEN2_DB         0x00000FC0
+#define AR_PHY_GAIN_2GHZ_XATTEN2_DB_S       6
+#define AR_PHY_GAIN_2GHZ_XATTEN1_DB         0x0000003F
+#define AR_PHY_GAIN_2GHZ_XATTEN1_DB_S       0
+
+#define AR_PHY_CCK_RXCTRL4  0xA21C
+#define AR_PHY_CCK_RXCTRL4_FREQ_EST_SHORT   0x01F80000
+#define AR_PHY_CCK_RXCTRL4_FREQ_EST_SHORT_S 19
+
+#define AR_PHY_DAG_CTRLCCK  0xA228
+#define AR_PHY_DAG_CTRLCCK_EN_RSSI_THR  0x00000200
+#define AR_PHY_DAG_CTRLCCK_RSSI_THR     0x0001FC00
+#define AR_PHY_DAG_CTRLCCK_RSSI_THR_S   10
+
+#define AR_PHY_FORCE_CLKEN_CCK              0xA22C
+#define AR_PHY_FORCE_CLKEN_CCK_MRC_MUX      0x00000040
+
+#define AR_PHY_POWER_TX_RATE3   0xA234
+#define AR_PHY_POWER_TX_RATE4   0xA238
+
+#define AR_PHY_SCRM_SEQ_XR       0xA23C
+#define AR_PHY_HEADER_DETECT_XR  0xA240
+#define AR_PHY_CHIRP_DETECTED_XR 0xA244
+#define AR_PHY_BLUETOOTH         0xA254
+
+#define AR_PHY_TPCRG1   0xA258
+#define AR_PHY_TPCRG1_NUM_PD_GAIN   0x0000c000
+#define AR_PHY_TPCRG1_NUM_PD_GAIN_S 14
+
+#define AR_PHY_TPCRG1_PD_GAIN_1    0x00030000
+#define AR_PHY_TPCRG1_PD_GAIN_1_S  16
+#define AR_PHY_TPCRG1_PD_GAIN_2    0x000C0000
+#define AR_PHY_TPCRG1_PD_GAIN_2_S  18
+#define AR_PHY_TPCRG1_PD_GAIN_3    0x00300000
+#define AR_PHY_TPCRG1_PD_GAIN_3_S  20
+
+#define AR_PHY_VIT_MASK2_M_46_61 0xa3a0
+#define AR_PHY_MASK2_M_31_45     0xa3a4
+#define AR_PHY_MASK2_M_16_30     0xa3a8
+#define AR_PHY_MASK2_M_00_15     0xa3ac
+#define AR_PHY_MASK2_P_15_01     0xa3b8
+#define AR_PHY_MASK2_P_30_16     0xa3bc
+#define AR_PHY_MASK2_P_45_31     0xa3c0
+#define AR_PHY_MASK2_P_61_45     0xa3c4
+#define AR_PHY_SPUR_REG          0x994c
+
+#define AR_PHY_SPUR_REG_MASK_RATE_CNTL       (0xFF << 18)
+#define AR_PHY_SPUR_REG_MASK_RATE_CNTL_S     18
+
+#define AR_PHY_SPUR_REG_ENABLE_MASK_PPM      0x20000
+#define AR_PHY_SPUR_REG_MASK_RATE_SELECT     (0xFF << 9)
+#define AR_PHY_SPUR_REG_MASK_RATE_SELECT_S   9
+#define AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI 0x100
+#define AR_PHY_SPUR_REG_SPUR_RSSI_THRESH     0x7F
+#define AR_PHY_SPUR_REG_SPUR_RSSI_THRESH_S   0
+
+#define AR_PHY_PILOT_MASK_01_30   0xa3b0
+#define AR_PHY_PILOT_MASK_31_60   0xa3b4
+
+#define AR_PHY_CHANNEL_MASK_01_30 0x99d4
+#define AR_PHY_CHANNEL_MASK_31_60 0x99d8
+
+#define AR_PHY_ANALOG_SWAP      0xa268
+#define AR_PHY_SWAP_ALT_CHAIN   0x00000040
+
+#define AR_PHY_TPCRG5   0xA26C
+#define AR_PHY_TPCRG5_PD_GAIN_OVERLAP       0x0000000F
+#define AR_PHY_TPCRG5_PD_GAIN_OVERLAP_S     0
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1    0x000003F0
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1_S  4
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2    0x0000FC00
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2_S  10
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3    0x003F0000
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3_S  16
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4    0x0FC00000
+#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4_S  22
+
+#define AR_PHY_POWER_TX_RATE5   0xA38C
+#define AR_PHY_POWER_TX_RATE6   0xA390
+
+#define AR_PHY_CAL_CHAINMASK    0xA39C
+
+#define AR_PHY_POWER_TX_SUB     0xA3C8
+#define AR_PHY_POWER_TX_RATE7   0xA3CC
+#define AR_PHY_POWER_TX_RATE8   0xA3D0
+#define AR_PHY_POWER_TX_RATE9   0xA3D4
+
+#define AR_PHY_XPA_CFG  	0xA3D8
+#define AR_PHY_FORCE_XPA_CFG	0x000000001
+#define AR_PHY_FORCE_XPA_CFG_S	0
+
+#define AR_PHY_CH1_CCA          0xa864
+#define AR_PHY_CH1_MINCCA_PWR   0x0FF80000
+#define AR_PHY_CH1_MINCCA_PWR_S 19
+#define AR9280_PHY_CH1_MINCCA_PWR   0x1FF00000
+#define AR9280_PHY_CH1_MINCCA_PWR_S 20
+
+#define AR_PHY_CH2_CCA          0xb864
+#define AR_PHY_CH2_MINCCA_PWR   0x0FF80000
+#define AR_PHY_CH2_MINCCA_PWR_S 19
+
+#define AR_PHY_CH1_EXT_CCA          0xa9bc
+#define AR_PHY_CH1_EXT_MINCCA_PWR   0xFF800000
+#define AR_PHY_CH1_EXT_MINCCA_PWR_S 23
+#define AR9280_PHY_CH1_EXT_MINCCA_PWR   0x01FF0000
+#define AR9280_PHY_CH1_EXT_MINCCA_PWR_S 16
+
+#define AR_PHY_CH2_EXT_CCA          0xb9bc
+#define AR_PHY_CH2_EXT_MINCCA_PWR   0xFF800000
+#define AR_PHY_CH2_EXT_MINCCA_PWR_S 23
+
+#define REG_WRITE_RF_ARRAY(iniarray, regData, regWr) do {               \
+		int r;							\
+		for (r = 0; r < ((iniarray)->ia_rows); r++) {		\
+			REG_WRITE(ah, INI_RA((iniarray), r, 0), (regData)[r]); \
+			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, \
+				"RF 0x%x V 0x%x\n", \
+				INI_RA((iniarray), r, 0), (regData)[r]); \
+			DO_DELAY(regWr);				\
+		}							\
+	} while (0)
+
+#define ATH9K_KEY_XOR                 0xaa
+
+#define ATH9K_IS_MIC_ENABLED(ah)					\
+	(AH5416(ah)->ah_staId1Defaults & AR_STA_ID1_CRPT_MIC_ENABLE)
+
+#define ANTSWAP_AB 0x0001
+#define REDUCE_CHAIN_0 0x00000050
+#define REDUCE_CHAIN_1 0x00000051
+
+#define RF_BANK_SETUP(_bank, _iniarray, _col) do {			\
+		int i;							\
+		for (i = 0; i < (_iniarray)->ia_rows; i++)		\
+			(_bank)[i] = INI_RA((_iniarray), i, _col);;	\
+	} while (0)
+
+#endif
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
new file mode 100644
index 00000000000..73c460ad355
--- /dev/null
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -0,0 +1,2126 @@
+/*
+ * Copyright (c) 2004 Video54 Technologies, Inc.
+ * Copyright (c) 2004-2008 Atheros Communications, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Atheros rate control algorithm
+ */
+
+#include "core.h"
+#include "../net/mac80211/rate.h"
+
+static u32 tx_triglevel_max;
+
+static struct ath_rate_table ar5416_11na_ratetable = {
+	42,
+	{
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 6 Mb */
+			5400, 0x0b, 0x00, 12,
+			0, 2, 1, 0, 0, 0, 0, 0 },
+		{ TRUE,	TRUE, WLAN_PHY_OFDM, 9000, /* 9 Mb */
+			7800,  0x0f, 0x00, 18,
+			0, 3, 1, 1, 1, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */
+			10000, 0x0a, 0x00, 24,
+			2, 4, 2, 2, 2, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */
+			13900, 0x0e, 0x00, 36,
+			2, 6,  2, 3, 3, 3, 3, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */
+			17300, 0x09, 0x00, 48,
+			4, 10, 3, 4, 4, 4, 4, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */
+			23000, 0x0d, 0x00, 72,
+			4, 14, 3, 5, 5, 5, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */
+			27400, 0x08, 0x00, 96,
+			4, 20, 3, 6, 6, 6, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */
+			29300, 0x0c, 0x00, 108,
+			4, 23, 3, 7, 7, 7, 7, 0 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 6500, /* 6.5 Mb */
+			6400, 0x80, 0x00, 0,
+			0, 2, 3, 8, 24, 8, 24, 3216 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 13000, /* 13 Mb */
+			12700, 0x81, 0x00, 1,
+			2, 4, 3, 9, 25, 9, 25, 6434 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 19500, /* 19.5 Mb */
+			18800, 0x82, 0x00, 2,
+			2, 6, 3, 10, 26, 10, 26, 9650 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 26000, /* 26 Mb */
+			25000, 0x83, 0x00, 3,
+			4, 10, 3, 11, 27, 11, 27, 12868 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 39000, /* 39 Mb */
+			36700, 0x84, 0x00, 4,
+			4, 14, 3, 12, 28, 12, 28, 19304 },
+		{ FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 52000, /* 52 Mb */
+			48100, 0x85, 0x00, 5,
+			4, 20, 3, 13, 29, 13, 29, 25740 },
+		{ FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 58500, /* 58.5 Mb */
+			53500, 0x86, 0x00, 6,
+			4, 23, 3, 14, 30, 14, 30,  28956 },
+		{ FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 65000, /* 65 Mb */
+			59000, 0x87, 0x00, 7,
+			4, 25, 3, 15, 31, 15, 32, 32180 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 13000, /* 13 Mb */
+			12700, 0x88, 0x00,
+			8, 0, 2, 3, 16, 33, 16, 33, 6430 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 26000, /* 26 Mb */
+			24800, 0x89, 0x00, 9,
+			2, 4, 3, 17, 34, 17, 34, 12860 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 39000, /* 39 Mb */
+			36600, 0x8a, 0x00, 10,
+			2, 6, 3, 18, 35, 18, 35, 19300 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 52000, /* 52 Mb */
+			48100, 0x8b, 0x00, 11,
+			4, 10, 3, 19, 36, 19, 36, 25736 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 78000, /* 78 Mb */
+			69500, 0x8c, 0x00, 12,
+			4, 14, 3, 20, 37, 20, 37, 38600 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 104000, /* 104 Mb */
+			89500, 0x8d, 0x00, 13,
+			4, 20, 3, 21, 38, 21, 38, 51472 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 117000, /* 117 Mb */
+			98900, 0x8e, 0x00, 14,
+			4, 23, 3, 22, 39, 22, 39, 57890 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 130000, /* 130 Mb */
+			108300, 0x8f, 0x00, 15,
+			4, 25, 3, 23, 40, 23, 41, 64320 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 13500, /* 13.5 Mb */
+			13200, 0x80, 0x00, 0,
+			0, 2, 3, 8, 24, 24, 24, 6684 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 27500, /* 27.0 Mb */
+			25900, 0x81, 0x00, 1,
+			2, 4, 3, 9, 25, 25, 25, 13368 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 40500, /* 40.5 Mb */
+			38600, 0x82, 0x00, 2,
+			2, 6, 3, 10, 26, 26, 26, 20052 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 54000, /* 54 Mb */
+			49800, 0x83, 0x00, 3,
+			4, 10, 3, 11, 27, 27, 27, 26738 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 81500, /* 81 Mb */
+			72200, 0x84, 0x00, 4,
+			4, 14, 3, 12, 28, 28, 28, 40104 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 108000, /* 108 Mb */
+			92900, 0x85, 0x00, 5,
+			4, 20, 3, 13, 29, 29, 29, 53476 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 121500, /* 121.5 Mb */
+			102700, 0x86, 0x00, 6,
+			4, 23, 3, 14, 30, 30, 30, 60156 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 135000, /* 135 Mb */
+			112000, 0x87, 0x00, 7,
+			4, 25, 3, 15, 31, 32, 32, 66840 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */
+			122000, 0x87, 0x00, 7,
+			4, 25, 3, 15, 31, 32, 32, 74200 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 27000, /* 27 Mb */
+			25800, 0x88, 0x00, 8,
+			0, 2, 3, 16, 33, 33, 33, 13360 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 54000, /* 54 Mb */
+			49800, 0x89, 0x00, 9,
+			2, 4, 3, 17, 34, 34, 34, 26720 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 81000, /* 81 Mb */
+			71900, 0x8a, 0x00, 10,
+			2, 6, 3, 18, 35, 35, 35, 40080 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 108000, /* 108 Mb */
+			92500, 0x8b, 0x00, 11,
+			4, 10, 3, 19, 36, 36, 36, 53440 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 162000, /* 162 Mb */
+			130300, 0x8c, 0x00, 12,
+			4, 14, 3, 20, 37, 37, 37, 80160 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 216000, /* 216 Mb */
+			162800, 0x8d, 0x00, 13,
+			4, 20, 3, 21, 38, 38, 38, 106880 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 243000, /* 243 Mb */
+			178200, 0x8e, 0x00, 14,
+			4, 23, 3, 22, 39, 39, 39, 120240 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 270000, /* 270 Mb */
+			192100, 0x8f, 0x00, 15,
+			4, 25, 3, 23, 40, 41, 41, 133600 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */
+			207000, 0x8f, 0x00, 15,
+			4, 25, 3, 23, 40, 41, 41, 148400 },
+	},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
+};
+
+/* TRUE_ALL - valid for 20/40/Legacy,
+ * TRUE - Legacy only,
+ * TRUE_20 - HT 20 only,
+ * TRUE_40 - HT 40 only */
+
+/* 4ms frame limit not used for NG mode.  The values filled
+ * for HT are the 64K max aggregate limit */
+
+static struct ath_rate_table ar5416_11ng_ratetable = {
+	46,
+	{
+		{ TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 1000, /* 1 Mb */
+			900, 0x1b, 0x00, 2,
+			0, 0, 1, 0, 0, 0, 0, 0 },
+		{ TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 2000, /* 2 Mb */
+			1900, 0x1a, 0x04, 4,
+			1, 1, 1, 1, 1, 1, 1, 0 },
+		{ TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 5500, /* 5.5 Mb */
+			4900, 0x19, 0x04, 11,
+			2, 2, 2, 2, 2, 2, 2, 0 },
+		{ TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 11000, /* 11 Mb */
+			8100, 0x18, 0x04, 22,
+			3, 3, 2, 3, 3, 3, 3, 0 },
+		{ FALSE, FALSE, WLAN_PHY_OFDM, 6000, /* 6 Mb */
+			5400, 0x0b, 0x00, 12,
+			4, 2, 1, 4, 4, 4, 4, 0 },
+		{ FALSE, FALSE, WLAN_PHY_OFDM, 9000, /* 9 Mb */
+			7800, 0x0f, 0x00, 18,
+			4, 3, 1, 5, 5, 5, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */
+			10100, 0x0a, 0x00, 24,
+			6, 4, 1, 6, 6, 6, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */
+			14100,  0x0e, 0x00, 36,
+			6, 6, 2, 7, 7, 7, 7, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */
+			17700, 0x09, 0x00, 48,
+			8, 10, 3, 8, 8, 8, 8, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */
+			23700, 0x0d, 0x00, 72,
+			8, 14, 3, 9, 9, 9, 9, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */
+			27400, 0x08, 0x00, 96,
+			8, 20, 3, 10, 10, 10, 10, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */
+			30900, 0x0c, 0x00, 108,
+			8, 23, 3, 11, 11, 11, 11, 0 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_SS, 6500, /* 6.5 Mb */
+			6400, 0x80, 0x00, 0,
+			4, 2, 3, 12, 28, 12, 28, 3216 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 13000, /* 13 Mb */
+			12700, 0x81, 0x00, 1,
+			6, 4, 3, 13, 29, 13, 29, 6434 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 19500, /* 19.5 Mb */
+			18800, 0x82, 0x00, 2,
+			6, 6, 3, 14, 30, 14, 30, 9650 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 26000, /* 26 Mb */
+			25000, 0x83, 0x00, 3,
+			8, 10, 3, 15, 31, 15, 31, 12868 },
+		{ TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 39000, /* 39 Mb */
+			36700, 0x84, 0x00, 4,
+			8, 14, 3, 16, 32, 16, 32, 19304 },
+		{ FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 52000, /* 52 Mb */
+			48100, 0x85, 0x00, 5,
+			8, 20, 3, 17, 33, 17, 33, 25740 },
+		{ FALSE,  TRUE_20, WLAN_PHY_HT_20_SS, 58500, /* 58.5 Mb */
+			53500, 0x86, 0x00, 6,
+			8, 23, 3, 18, 34, 18, 34, 28956 },
+		{ FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 65000, /* 65 Mb */
+			59000, 0x87, 0x00, 7,
+			8, 25, 3, 19, 35, 19, 36, 32180 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 13000, /* 13 Mb */
+			12700, 0x88, 0x00, 8,
+			4, 2, 3, 20, 37, 20, 37, 6430 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 26000, /* 26 Mb */
+			24800, 0x89, 0x00, 9,
+			6, 4, 3, 21, 38, 21, 38, 12860 },
+		{ FALSE, FALSE, WLAN_PHY_HT_20_DS, 39000, /* 39 Mb */
+			36600, 0x8a, 0x00, 10,
+			6, 6, 3, 22, 39, 22, 39, 19300 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 52000, /* 52 Mb */
+			48100, 0x8b, 0x00, 11,
+			8, 10, 3, 23, 40, 23, 40, 25736 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 78000, /* 78 Mb */
+			69500, 0x8c, 0x00, 12,
+			8, 14, 3, 24, 41, 24, 41, 38600 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 104000, /* 104 Mb */
+			89500, 0x8d, 0x00, 13,
+			8, 20, 3, 25, 42, 25, 42, 51472 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 117000, /* 117 Mb */
+			98900, 0x8e, 0x00, 14,
+			8, 23, 3, 26, 43, 26, 44, 57890 },
+		{ TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 130000, /* 130 Mb */
+			108300, 0x8f, 0x00, 15,
+			8, 25, 3, 27, 44, 27, 45, 64320 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 13500, /* 13.5 Mb */
+			13200, 0x80, 0x00, 0,
+			8, 2, 3, 12, 28, 28, 28, 6684 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 27500, /* 27.0 Mb */
+			25900, 0x81, 0x00, 1,
+			8, 4, 3, 13, 29, 29, 29, 13368 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 40500, /* 40.5 Mb */
+			38600, 0x82, 0x00, 2,
+			8, 6, 3, 14, 30, 30, 30, 20052 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 54000, /* 54 Mb */
+			49800, 0x83, 0x00, 3,
+			8, 10, 3, 15, 31, 31, 31, 26738 },
+		{ TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 81500, /* 81 Mb */
+			72200, 0x84, 0x00, 4,
+			8, 14, 3, 16, 32, 32, 32, 40104 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 108000, /* 108 Mb */
+			92900, 0x85, 0x00, 5,
+			8, 20, 3, 17, 33, 33, 33, 53476 },
+		{ FALSE,  TRUE_40, WLAN_PHY_HT_40_SS, 121500, /* 121.5 Mb */
+			102700, 0x86, 0x00, 6,
+			8, 23, 3, 18, 34, 34, 34, 60156 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 135000, /* 135 Mb */
+			112000, 0x87, 0x00, 7,
+			8, 23, 3, 19, 35, 36, 36, 66840 },
+		{ FALSE, TRUE_40, WLAN_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */
+			122000, 0x87, 0x00, 7,
+			8, 25, 3, 19, 35, 36, 36, 74200 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 27000, /* 27 Mb */
+			25800, 0x88, 0x00, 8,
+			8, 2, 3, 20, 37, 37, 37, 13360 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 54000, /* 54 Mb */
+			49800, 0x89, 0x00, 9,
+			8, 4, 3, 21, 38, 38, 38, 26720 },
+		{ FALSE, FALSE, WLAN_PHY_HT_40_DS, 81000, /* 81 Mb */
+			71900, 0x8a, 0x00, 10,
+			8, 6, 3, 22, 39, 39, 39, 40080 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 108000, /* 108 Mb */
+			92500, 0x8b, 0x00, 11,
+			8, 10, 3, 23, 40, 40, 40, 53440 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 162000, /* 162 Mb */
+			130300, 0x8c, 0x00, 12,
+			8, 14, 3, 24, 41, 41, 41, 80160 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 216000, /* 216 Mb */
+			162800, 0x8d, 0x00, 13,
+			8, 20, 3, 25, 42, 42, 42, 106880 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 243000, /* 243 Mb */
+			178200, 0x8e, 0x00, 14,
+			8, 23, 3, 26, 43, 43, 43, 120240 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 270000, /* 270 Mb */
+			192100, 0x8f, 0x00, 15,
+			8, 23, 3, 27, 44, 45, 45, 133600 },
+		{ TRUE_40, FALSE, WLAN_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */
+			207000, 0x8f, 0x00, 15,
+			8, 25, 3, 27, 44, 45, 45, 148400 },
+		},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
+};
+
+static struct ath_rate_table ar5416_11a_ratetable = {
+	8,
+	{
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 6 Mb */
+			5400, 0x0b, 0x00, (0x80|12),
+			0, 2, 1, 0, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 9000, /* 9 Mb */
+			7800, 0x0f, 0x00, 18,
+			0, 3, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */
+			10000, 0x0a, 0x00, (0x80|24),
+			2, 4, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */
+			13900, 0x0e, 0x00, 36,
+			2, 6, 2, 3, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */
+			17300, 0x09, 0x00, (0x80|48),
+			4, 10, 3, 4, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */
+			23000, 0x0d, 0x00, 72,
+			4, 14, 3, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */
+			27400, 0x08, 0x00, 96,
+			4, 19, 3, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */
+			29300, 0x0c, 0x00, 108,
+			4, 23, 3, 7, 0 },
+	},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	0,   /* Phy rates allowed initially */
+};
+
+static struct ath_rate_table ar5416_11a_ratetable_Half = {
+	8,
+	{
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 3000, /* 6 Mb */
+			2700, 0x0b, 0x00, (0x80|6),
+			0, 2,  1, 0, 0},
+		{ TRUE, TRUE,  WLAN_PHY_OFDM, 4500, /* 9 Mb */
+			3900, 0x0f, 0x00, 9,
+			0, 3, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 12 Mb */
+			5000, 0x0a, 0x00, (0x80|12),
+			2, 4, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 9000, /* 18 Mb */
+			6950, 0x0e, 0x00, 18,
+			2, 6, 2, 3, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 24 Mb */
+			8650, 0x09, 0x00, (0x80|24),
+			4, 10, 3, 4, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 36 Mb */
+			11500, 0x0d, 0x00, 36,
+			4, 14, 3, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 48 Mb */
+			13700, 0x08, 0x00, 48,
+			4, 19, 3, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 27000, /* 54 Mb */
+			14650, 0x0c, 0x00, 54,
+			4, 23, 3, 7, 0 },
+	},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	0,   /* Phy rates allowed initially */
+};
+
+static struct ath_rate_table ar5416_11a_ratetable_Quarter = {
+	8,
+	{
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 1500, /* 6 Mb */
+			1350, 0x0b, 0x00, (0x80|3),
+			0, 2, 1, 0, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 2250, /* 9 Mb */
+			1950, 0x0f, 0x00, 4,
+			0, 3, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 3000, /* 12 Mb */
+			2500, 0x0a, 0x00, (0x80|6),
+			2, 4, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 4500, /* 18 Mb */
+			3475, 0x0e, 0x00, 9,
+			2, 6, 2, 3, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 25 Mb */
+			4325, 0x09, 0x00, (0x80|12),
+			4, 10, 3, 4, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 9000, /* 36 Mb */
+			5750, 0x0d, 0x00, 18,
+			4, 14, 3, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 48 Mb */
+			6850, 0x08, 0x00, 24,
+			4, 19, 3, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 13500, /* 54 Mb */
+			7325, 0x0c, 0x00, 27,
+			4, 23, 3, 7, 0 },
+	},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	0,   /* Phy rates allowed initially */
+};
+
+static struct ath_rate_table ar5416_11g_ratetable = {
+	12,
+	{
+		{ TRUE, TRUE, WLAN_PHY_CCK, 1000, /* 1 Mb */
+			900, 0x1b, 0x00, 2,
+			0, 0, 1, 0, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 2000, /* 2 Mb */
+			1900, 0x1a, 0x04, 4,
+			1, 1, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 5500, /* 5.5 Mb */
+			4900, 0x19, 0x04, 11,
+			2, 2, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 11000, /* 11 Mb */
+			8100, 0x18, 0x04, 22,
+			3, 3, 2, 3, 0 },
+		{ FALSE, FALSE, WLAN_PHY_OFDM, 6000, /* 6 Mb */
+			5400, 0x0b, 0x00, 12,
+			4, 2, 1, 4, 0 },
+		{ FALSE, FALSE, WLAN_PHY_OFDM, 9000, /* 9 Mb */
+			7800, 0x0f, 0x00, 18,
+			4, 3, 1, 5, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */
+			10000, 0x0a, 0x00, 24,
+			6, 4, 1, 6, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */
+			13900, 0x0e, 0x00, 36,
+			6, 6, 2, 7, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */
+			17300, 0x09, 0x00, 48,
+			8, 10, 3, 8, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */
+			23000, 0x0d, 0x00, 72,
+			8, 14, 3, 9, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */
+			27400, 0x08, 0x00, 96,
+			8, 19, 3, 10, 0 },
+		{ TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */
+			29300, 0x0c, 0x00, 108,
+			8, 23, 3, 11, 0 },
+	},
+	50,  /* probe interval */
+	50,  /* rssi reduce interval */
+	0,   /* Phy rates allowed initially */
+};
+
+static struct ath_rate_table ar5416_11b_ratetable = {
+	4,
+	{
+		{ TRUE, TRUE, WLAN_PHY_CCK, 1000, /* 1 Mb */
+			900, 0x1b,  0x00, (0x80|2),
+			0, 0, 1, 0, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 2000, /* 2 Mb */
+			1800, 0x1a, 0x04, (0x80|4),
+			1, 1, 1, 1, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 5500, /* 5.5 Mb */
+			4300, 0x19, 0x04, (0x80|11),
+			1, 2, 2, 2, 0 },
+		{ TRUE, TRUE, WLAN_PHY_CCK, 11000, /* 11 Mb */
+			7100, 0x18, 0x04, (0x80|22),
+			1, 4, 100, 3, 0 },
+	},
+	100, /* probe interval */
+	100, /* rssi reduce interval */
+	0,   /* Phy rates allowed initially */
+};
+
+static void ar5416_attach_ratetables(struct ath_rate_softc *sc)
+{
+	/*
+	 * Attach rate tables.
+	 */
+	sc->hw_rate_table[ATH9K_MODE_11B] = &ar5416_11b_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11G] = &ar5416_11g_ratetable;
+
+	sc->hw_rate_table[ATH9K_MODE_11NA_HT20] = &ar5416_11na_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11NG_HT20] = &ar5416_11ng_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS] =
+		&ar5416_11na_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS] =
+		&ar5416_11na_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS] =
+		&ar5416_11ng_ratetable;
+	sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] =
+		&ar5416_11ng_ratetable;
+}
+
+static void ar5416_setquarter_ratetable(struct ath_rate_softc *sc)
+{
+	sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable_Quarter;
+	return;
+}
+
+static void ar5416_sethalf_ratetable(struct ath_rate_softc *sc)
+{
+	sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable_Half;
+	return;
+}
+
+static void ar5416_setfull_ratetable(struct ath_rate_softc *sc)
+{
+	sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable;
+	return;
+}
+
+/*
+ * Return the median of three numbers
+ */
+static inline int8_t median(int8_t a, int8_t b, int8_t c)
+{
+	if (a >= b) {
+		if (b >= c)
+			return b;
+		else if (a > c)
+			return c;
+		else
+			return a;
+	} else {
+		if (a >= c)
+			return a;
+		else if (b >= c)
+			return c;
+		else
+			return b;
+	}
+}
+
+static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table,
+				   struct ath_tx_ratectrl *rate_ctrl)
+{
+	u8 i, j, idx, idx_next;
+
+	for (i = rate_ctrl->max_valid_rate - 1; i > 0; i--) {
+		for (j = 0; j <= i-1; j++) {
+			idx = rate_ctrl->valid_rate_index[j];
+			idx_next = rate_ctrl->valid_rate_index[j+1];
+
+			if (rate_table->info[idx].ratekbps >
+				rate_table->info[idx_next].ratekbps) {
+				rate_ctrl->valid_rate_index[j] = idx_next;
+				rate_ctrl->valid_rate_index[j+1] = idx;
+			}
+		}
+	}
+}
+
+/* Access functions for valid_txrate_mask */
+
+static void ath_rc_init_valid_txmask(struct ath_tx_ratectrl *rate_ctrl)
+{
+	u8 i;
+
+	for (i = 0; i < rate_ctrl->rate_table_size; i++)
+		rate_ctrl->valid_rate_index[i] = FALSE;
+}
+
+static inline void ath_rc_set_valid_txmask(struct ath_tx_ratectrl *rate_ctrl,
+					   u8 index, int valid_tx_rate)
+{
+	ASSERT(index <= rate_ctrl->rate_table_size);
+	rate_ctrl->valid_rate_index[index] = valid_tx_rate ? TRUE : FALSE;
+}
+
+static inline int ath_rc_isvalid_txmask(struct ath_tx_ratectrl *rate_ctrl,
+					u8 index)
+{
+	ASSERT(index <= rate_ctrl->rate_table_size);
+	return rate_ctrl->valid_rate_index[index];
+}
+
+/* Iterators for valid_txrate_mask */
+static inline int
+ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table,
+			    struct ath_tx_ratectrl *rate_ctrl,
+			    u8 cur_valid_txrate,
+			    u8 *next_idx)
+{
+	u8 i;
+
+	for (i = 0; i < rate_ctrl->max_valid_rate - 1; i++) {
+		if (rate_ctrl->valid_rate_index[i] == cur_valid_txrate) {
+			*next_idx = rate_ctrl->valid_rate_index[i+1];
+			return TRUE;
+		}
+	}
+
+	/* No more valid rates */
+	*next_idx = 0;
+	return FALSE;
+}
+
+/* Return true only for single stream */
+
+static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
+{
+	if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG))
+		return FALSE;
+	if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG))
+		return FALSE;
+	if (WLAN_RC_PHY_SGI(phy) && !(capflag & WLAN_RC_SGI_FLAG))
+		return FALSE;
+	if (!ignore_cw && WLAN_RC_PHY_HT(phy))
+		if (WLAN_RC_PHY_40(phy) && !(capflag & WLAN_RC_40_FLAG))
+			return FALSE;
+		if (!WLAN_RC_PHY_40(phy) && (capflag & WLAN_RC_40_FLAG))
+			return FALSE;
+	return TRUE;
+}
+
+static inline int
+ath_rc_get_nextlowervalid_txrate(const struct ath_rate_table *rate_table,
+				 struct ath_tx_ratectrl *rate_ctrl,
+				 u8 cur_valid_txrate, u8 *next_idx)
+{
+	int8_t i;
+
+	for (i = 1; i < rate_ctrl->max_valid_rate ; i++) {
+		if (rate_ctrl->valid_rate_index[i] == cur_valid_txrate) {
+			*next_idx = rate_ctrl->valid_rate_index[i-1];
+			return TRUE;
+		}
+	}
+	return FALSE;
+}
+
+/*
+ * Initialize the Valid Rate Index from valid entries in Rate Table
+ */
+static u8
+ath_rc_sib_init_validrates(struct ath_rate_node *ath_rc_priv,
+			   const struct ath_rate_table *rate_table,
+			   u32 capflag)
+{
+	struct ath_tx_ratectrl *rate_ctrl;
+	u8 i, hi = 0;
+	u32 valid;
+
+	rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv);
+	for (i = 0; i < rate_table->rate_cnt; i++) {
+		valid = (ath_rc_priv->single_stream ?
+				rate_table->info[i].valid_single_stream :
+				rate_table->info[i].valid);
+		if (valid == TRUE) {
+			u32 phy = rate_table->info[i].phy;
+			u8 valid_rate_count = 0;
+
+			if (!ath_rc_valid_phyrate(phy, capflag, FALSE))
+				continue;
+
+			valid_rate_count = rate_ctrl->valid_phy_ratecnt[phy];
+
+			rate_ctrl->valid_phy_rateidx[phy][valid_rate_count] = i;
+			rate_ctrl->valid_phy_ratecnt[phy] += 1;
+			ath_rc_set_valid_txmask(rate_ctrl, i, TRUE);
+			hi = A_MAX(hi, i);
+		}
+	}
+	return hi;
+}
+
+/*
+ * Initialize the Valid Rate Index from Rate Set
+ */
+static u8
+ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv,
+			  const struct ath_rate_table *rate_table,
+			  struct ath_rateset *rateset,
+			  u32 capflag)
+{
+	/* XXX: Clean me up and make identation friendly */
+	u8 i, j, hi = 0;
+	struct ath_tx_ratectrl *rate_ctrl =
+		(struct ath_tx_ratectrl *)(ath_rc_priv);
+
+	/* Use intersection of working rates and valid rates */
+	for (i = 0; i < rateset->rs_nrates; i++) {
+		for (j = 0; j < rate_table->rate_cnt; j++) {
+			u32 phy = rate_table->info[j].phy;
+			u32 valid = (ath_rc_priv->single_stream ?
+				rate_table->info[j].valid_single_stream :
+				rate_table->info[j].valid);
+
+			/* We allow a rate only if its valid and the
+			 * capflag matches one of the validity
+			 * (TRUE/TRUE_20/TRUE_40) flags */
+
+			/* XXX: catch the negative of this branch
+			 * first and then continue */
+			if (((rateset->rs_rates[i] & 0x7F) ==
+				(rate_table->info[j].dot11rate & 0x7F)) &&
+				((valid & WLAN_RC_CAP_MODE(capflag)) ==
+				WLAN_RC_CAP_MODE(capflag)) &&
+				!WLAN_RC_PHY_HT(phy)) {
+
+				u8 valid_rate_count = 0;
+
+				if (!ath_rc_valid_phyrate(phy, capflag, FALSE))
+					continue;
+
+				valid_rate_count =
+					rate_ctrl->valid_phy_ratecnt[phy];
+
+				rate_ctrl->valid_phy_rateidx[phy]
+					[valid_rate_count] = j;
+				rate_ctrl->valid_phy_ratecnt[phy] += 1;
+				ath_rc_set_valid_txmask(rate_ctrl, j, TRUE);
+				hi = A_MAX(hi, j);
+			}
+		}
+	}
+	return hi;
+}
+
+static u8
+ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv,
+			    const struct ath_rate_table *rate_table,
+			    u8 *mcs_set, u32 capflag)
+{
+	u8 i, j, hi = 0;
+	struct ath_tx_ratectrl *rate_ctrl =
+		(struct ath_tx_ratectrl *)(ath_rc_priv);
+
+	/* Use intersection of working rates and valid rates */
+	for (i = 0; i <  ((struct ath_rateset *)mcs_set)->rs_nrates; i++) {
+		for (j = 0; j < rate_table->rate_cnt; j++) {
+			u32 phy = rate_table->info[j].phy;
+			u32 valid = (ath_rc_priv->single_stream ?
+				rate_table->info[j].valid_single_stream :
+				rate_table->info[j].valid);
+
+			if (((((struct ath_rateset *)
+				mcs_set)->rs_rates[i] & 0x7F) !=
+				(rate_table->info[j].dot11rate & 0x7F)) ||
+					!WLAN_RC_PHY_HT(phy) ||
+					!WLAN_RC_PHY_HT_VALID(valid, capflag))
+				continue;
+
+			if (!ath_rc_valid_phyrate(phy, capflag, FALSE))
+				continue;
+
+			rate_ctrl->valid_phy_rateidx[phy]
+				[rate_ctrl->valid_phy_ratecnt[phy]] = j;
+			rate_ctrl->valid_phy_ratecnt[phy] += 1;
+			ath_rc_set_valid_txmask(rate_ctrl, j, TRUE);
+			hi = A_MAX(hi, j);
+		}
+	}
+	return hi;
+}
+
+/*
+ * Attach to a device instance.  Setup the public definition
+ * of how much per-node space we need and setup the private
+ * phy tables that have rate control parameters.
+ */
+struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah)
+{
+	struct ath_rate_softc *asc;
+
+	/* we are only in user context so we can sleep for memory */
+	asc = kzalloc(sizeof(struct ath_rate_softc), GFP_KERNEL);
+	if (asc == NULL)
+		return NULL;
+
+	ar5416_attach_ratetables(asc);
+
+	/* Save Maximum TX Trigger Level (used for 11n) */
+	tx_triglevel_max = ah->ah_caps.tx_triglevel_max;
+	/*  return alias for ath_rate_softc * */
+	return asc;
+}
+
+static struct ath_rate_node *ath_rate_node_alloc(struct ath_vap *avp,
+						 struct ath_rate_softc *rsc,
+						 gfp_t gfp)
+{
+	struct ath_rate_node *anode;
+
+	anode = kzalloc(sizeof(struct ath_rate_node), gfp);
+	if (anode == NULL)
+		return NULL;
+
+	anode->avp = avp;
+	anode->asc = rsc;
+	avp->rc_node = anode;
+
+	return anode;
+}
+
+static void ath_rate_node_free(struct ath_rate_node *anode)
+{
+	if (anode != NULL)
+		kfree(anode);
+}
+
+void ath_rate_detach(struct ath_rate_softc *asc)
+{
+	if (asc != NULL)
+		kfree(asc);
+}
+
+u8 ath_rate_findrateix(struct ath_softc *sc,
+			     u8 dot11rate)
+{
+	const struct ath_rate_table *ratetable;
+	struct ath_rate_softc *rsc = sc->sc_rc;
+	int i;
+
+	ratetable = rsc->hw_rate_table[sc->sc_curmode];
+
+	if (WARN_ON(!ratetable))
+		return 0;
+
+	for (i = 0; i < ratetable->rate_cnt; i++) {
+		if ((ratetable->info[i].dot11rate & 0x7f) == (dot11rate & 0x7f))
+			return i;
+	}
+
+	return 0;
+}
+
+/*
+ * Update rate-control state on a device state change.  When
+ * operating as a station this includes associate/reassociate
+ * with an AP.  Otherwise this gets called, for example, when
+ * the we transition to run state when operating as an AP.
+ */
+void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp)
+{
+	struct ath_rate_softc *asc = sc->sc_rc;
+
+	/* For half and quarter rate channles use different
+	 * rate tables
+	 */
+	if (sc->sc_curchan.channelFlags & CHANNEL_HALF)
+		ar5416_sethalf_ratetable(asc);
+	else if (sc->sc_curchan.channelFlags & CHANNEL_QUARTER)
+		ar5416_setquarter_ratetable(asc);
+	else /* full rate */
+		ar5416_setfull_ratetable(asc);
+
+	if (avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE) {
+		asc->fixedrix =
+			sc->sc_rixmap[avp->av_config.av_fixed_rateset & 0xff];
+		/* NB: check the fixed rate exists */
+		if (asc->fixedrix == 0xff)
+			asc->fixedrix = IEEE80211_FIXED_RATE_NONE;
+	} else {
+		asc->fixedrix = IEEE80211_FIXED_RATE_NONE;
+	}
+}
+
+static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
+				   struct ath_rate_node *ath_rc_priv,
+				   const struct ath_rate_table *rate_table,
+				   int probe_allowed, int *is_probing,
+				   int is_retry)
+{
+	u32 dt, best_thruput, this_thruput, now_msec;
+	u8 rate, next_rate, best_rate, maxindex, minindex;
+	int8_t  rssi_last, rssi_reduce = 0, index = 0;
+	struct ath_tx_ratectrl  *rate_ctrl = NULL;
+
+	rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv ?
+					       (ath_rc_priv) : NULL);
+
+	*is_probing = FALSE;
+
+	rssi_last = median(rate_ctrl->rssi_last,
+			   rate_ctrl->rssi_last_prev,
+			   rate_ctrl->rssi_last_prev2);
+
+	/*
+	 * Age (reduce) last ack rssi based on how old it is.
+	 * The bizarre numbers are so the delta is 160msec,
+	 * meaning we divide by 16.
+	 *   0msec   <= dt <= 25msec:   don't derate
+	 *   25msec  <= dt <= 185msec:  derate linearly from 0 to 10dB
+	 *   185msec <= dt:             derate by 10dB
+	 */
+
+	now_msec = jiffies_to_msecs(jiffies);
+	dt = now_msec - rate_ctrl->rssi_time;
+
+	if (dt >= 185)
+		rssi_reduce = 10;
+	else if (dt >= 25)
+		rssi_reduce = (u8)((dt - 25) >> 4);
+
+	/* Now reduce rssi_last by rssi_reduce */
+	if (rssi_last < rssi_reduce)
+		rssi_last = 0;
+	else
+		rssi_last -= rssi_reduce;
+
+	/*
+	 * Now look up the rate in the rssi table and return it.
+	 * If no rates match then we return 0 (lowest rate)
+	 */
+
+	best_thruput = 0;
+	maxindex = rate_ctrl->max_valid_rate-1;
+
+	minindex = 0;
+	best_rate = minindex;
+
+	/*
+	 * Try the higher rate first. It will reduce memory moving time
+	 * if we have very good channel characteristics.
+	 */
+	for (index = maxindex; index >= minindex ; index--) {
+		u8 per_thres;
+
+		rate = rate_ctrl->valid_rate_index[index];
+		if (rate > rate_ctrl->rate_max_phy)
+			continue;
+
+		/*
+		 * For TCP the average collision rate is around 11%,
+		 * so we ignore PERs less than this.  This is to
+		 * prevent the rate we are currently using (whose
+		 * PER might be in the 10-15 range because of TCP
+		 * collisions) looking worse than the next lower
+		 * rate whose PER has decayed close to 0.  If we
+		 * used to next lower rate, its PER would grow to
+		 * 10-15 and we would be worse off then staying
+		 * at the current rate.
+		 */
+		per_thres = rate_ctrl->state[rate].per;
+		if (per_thres < 12)
+			per_thres = 12;
+
+		this_thruput = rate_table->info[rate].user_ratekbps *
+			(100 - per_thres);
+
+		if (best_thruput <= this_thruput) {
+			best_thruput = this_thruput;
+			best_rate    = rate;
+		}
+	}
+
+	rate = best_rate;
+
+	/* if we are retrying for more than half the number
+	 * of max retries, use the min rate for the next retry
+	 */
+	if (is_retry)
+		rate = rate_ctrl->valid_rate_index[minindex];
+
+	rate_ctrl->rssi_last_lookup = rssi_last;
+
+	/*
+	 * Must check the actual rate (ratekbps) to account for
+	 * non-monoticity of 11g's rate table
+	 */
+
+	if (rate >= rate_ctrl->rate_max_phy && probe_allowed) {
+		rate = rate_ctrl->rate_max_phy;
+
+		/* Probe the next allowed phy state */
+		/* FIXME:XXXX Check to make sure ratMax is checked properly */
+		if (ath_rc_get_nextvalid_txrate(rate_table,
+						rate_ctrl, rate, &next_rate) &&
+		    (now_msec - rate_ctrl->probe_time >
+		     rate_table->probe_interval) &&
+		    (rate_ctrl->hw_maxretry_pktcnt >= 1)) {
+			rate = next_rate;
+			rate_ctrl->probe_rate = rate;
+			rate_ctrl->probe_time = now_msec;
+			rate_ctrl->hw_maxretry_pktcnt = 0;
+			*is_probing = TRUE;
+		}
+	}
+
+	/*
+	 * Make sure rate is not higher than the allowed maximum.
+	 * We should also enforce the min, but I suspect the min is
+	 * normally 1 rather than 0 because of the rate 9 vs 6 issue
+	 * in the old code.
+	 */
+	if (rate > (rate_ctrl->rate_table_size - 1))
+		rate = rate_ctrl->rate_table_size - 1;
+
+	ASSERT((rate_table->info[rate].valid && !ath_rc_priv->single_stream) ||
+		(rate_table->info[rate].valid_single_stream &&
+			ath_rc_priv->single_stream));
+
+	return rate;
+}
+
+static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table ,
+				   struct ath_rc_series *series,
+				   u8 tries,
+				   u8 rix,
+				   int rtsctsenable)
+{
+	series->tries = tries;
+	series->flags = (rtsctsenable ? ATH_RC_RTSCTS_FLAG : 0) |
+		(WLAN_RC_PHY_DS(rate_table->info[rix].phy) ?
+		 ATH_RC_DS_FLAG : 0) |
+		(WLAN_RC_PHY_40(rate_table->info[rix].phy) ?
+		 ATH_RC_CW40_FLAG : 0) |
+		(WLAN_RC_PHY_SGI(rate_table->info[rix].phy) ?
+		 ATH_RC_SGI_FLAG : 0);
+
+	series->rix = rate_table->info[rix].base_index;
+	series->max_4ms_framelen = rate_table->info[rix].max_4ms_framelen;
+}
+
+static u8 ath_rc_rate_getidx(struct ath_softc *sc,
+				   struct ath_rate_node *ath_rc_priv,
+				   const struct ath_rate_table *rate_table,
+				   u8 rix, u16 stepdown,
+				   u16 min_rate)
+{
+	u32 j;
+	u8 nextindex;
+	struct ath_tx_ratectrl *rate_ctrl =
+		(struct ath_tx_ratectrl *)(ath_rc_priv);
+
+	if (min_rate) {
+		for (j = RATE_TABLE_SIZE; j > 0; j--) {
+			if (ath_rc_get_nextlowervalid_txrate(rate_table,
+						rate_ctrl, rix, &nextindex))
+				rix = nextindex;
+			else
+				break;
+		}
+	} else {
+		for (j = stepdown; j > 0; j--) {
+			if (ath_rc_get_nextlowervalid_txrate(rate_table,
+						rate_ctrl, rix, &nextindex))
+				rix = nextindex;
+			else
+				break;
+		}
+	}
+	return rix;
+}
+
+static void ath_rc_ratefind(struct ath_softc *sc,
+			    struct ath_rate_node *ath_rc_priv,
+			    int num_tries, int num_rates, unsigned int rcflag,
+			    struct ath_rc_series series[], int *is_probe,
+			    int is_retry)
+{
+	u8 try_per_rate = 0, i = 0, rix, nrix;
+	struct ath_rate_softc  *asc = (struct ath_rate_softc *)sc->sc_rc;
+	struct ath_rate_table *rate_table;
+
+	rate_table =
+		(struct ath_rate_table *)asc->hw_rate_table[sc->sc_curmode];
+	rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table,
+				(rcflag & ATH_RC_PROBE_ALLOWED) ? 1 : 0,
+				is_probe, is_retry);
+	nrix = rix;
+
+	if ((rcflag & ATH_RC_PROBE_ALLOWED) && (*is_probe)) {
+		/* set one try for probe rates. For the
+		 * probes don't enable rts */
+		ath_rc_rate_set_series(rate_table,
+			&series[i++], 1, nrix, FALSE);
+
+		try_per_rate = (num_tries/num_rates);
+		/* Get the next tried/allowed rate. No RTS for the next series
+		 * after the probe rate
+		 */
+		nrix = ath_rc_rate_getidx(sc,
+			ath_rc_priv, rate_table, nrix, 1, FALSE);
+		ath_rc_rate_set_series(rate_table,
+			&series[i++], try_per_rate, nrix, 0);
+	} else {
+		try_per_rate = (num_tries/num_rates);
+		/* Set the choosen rate. No RTS for first series entry. */
+		ath_rc_rate_set_series(rate_table,
+			&series[i++], try_per_rate, nrix, FALSE);
+	}
+
+	/* Fill in the other rates for multirate retry */
+	for ( ; i < num_rates; i++) {
+		u8 try_num;
+		u8 min_rate;
+
+		try_num = ((i + 1) == num_rates) ?
+			num_tries - (try_per_rate * i) : try_per_rate ;
+		min_rate = (((i + 1) == num_rates) &&
+			(rcflag & ATH_RC_MINRATE_LASTRATE)) ? 1 : 0;
+
+		nrix = ath_rc_rate_getidx(sc, ath_rc_priv,
+			rate_table, nrix, 1, min_rate);
+		/* All other rates in the series have RTS enabled */
+		ath_rc_rate_set_series(rate_table,
+			&series[i], try_num, nrix, TRUE);
+	}
+
+	/*
+	 * NB:Change rate series to enable aggregation when operating
+	 * at lower MCS rates. When first rate in series is MCS2
+	 * in HT40 @ 2.4GHz, series should look like:
+	 *
+	 * {MCS2, MCS1, MCS0, MCS0}.
+	 *
+	 * When first rate in series is MCS3 in HT20 @ 2.4GHz, series should
+	 * look like:
+	 *
+	 * {MCS3, MCS2, MCS1, MCS1}
+	 *
+	 * So, set fourth rate in series to be same as third one for
+	 * above conditions.
+	 */
+	if ((sc->sc_curmode == ATH9K_MODE_11NG_HT20) ||
+			(sc->sc_curmode == ATH9K_MODE_11NG_HT40PLUS) ||
+			(sc->sc_curmode == ATH9K_MODE_11NG_HT40MINUS)) {
+		u8  dot11rate = rate_table->info[rix].dot11rate;
+		u8 phy = rate_table->info[rix].phy;
+		if (i == 4 &&
+		    ((dot11rate == 2 && phy == WLAN_RC_PHY_HT_40_SS) ||
+		    (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) {
+			series[3].rix = series[2].rix;
+			series[3].flags = series[2].flags;
+			series[3].max_4ms_framelen = series[2].max_4ms_framelen;
+		}
+	}
+}
+
+/*
+ * Return the Tx rate series.
+ */
+void ath_rate_findrate(struct ath_softc *sc,
+		       struct ath_rate_node *ath_rc_priv,
+		       int num_tries,
+		       int num_rates,
+		       unsigned int rcflag,
+		       struct ath_rc_series series[],
+		       int *is_probe,
+		       int is_retry)
+{
+	struct ath_vap *avp = ath_rc_priv->avp;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s", __func__);
+	if (!num_rates || !num_tries)
+		return;
+
+	if (avp->av_config.av_fixed_rateset == IEEE80211_FIXED_RATE_NONE) {
+		ath_rc_ratefind(sc, ath_rc_priv, num_tries, num_rates,
+				rcflag, series, is_probe, is_retry);
+	} else {
+		/* Fixed rate */
+		int idx;
+		u8 flags;
+		u32 rix;
+		struct ath_rate_softc *asc = ath_rc_priv->asc;
+		struct ath_rate_table *rate_table;
+
+		rate_table = (struct ath_rate_table *)
+			asc->hw_rate_table[sc->sc_curmode];
+
+		for (idx = 0; idx < 4; idx++) {
+			unsigned int    mcs;
+			u8 series_rix = 0;
+
+			series[idx].tries =
+				IEEE80211_RATE_IDX_ENTRY(
+					avp->av_config.av_fixed_retryset, idx);
+
+			mcs = IEEE80211_RATE_IDX_ENTRY(
+				avp->av_config.av_fixed_rateset, idx);
+
+			if (idx == 3 && (mcs & 0xf0) == 0x70)
+				mcs = (mcs & ~0xf0)|0x80;
+
+			if (!(mcs & 0x80))
+				flags = 0;
+			else
+				flags = ((ath_rc_priv->ht_cap &
+						WLAN_RC_DS_FLAG) ?
+						ATH_RC_DS_FLAG : 0) |
+					((ath_rc_priv->ht_cap &
+						WLAN_RC_40_FLAG) ?
+						ATH_RC_CW40_FLAG : 0) |
+					((ath_rc_priv->ht_cap &
+						WLAN_RC_SGI_FLAG) ?
+					((ath_rc_priv->ht_cap &
+						WLAN_RC_40_FLAG) ?
+						ATH_RC_SGI_FLAG : 0) : 0);
+
+			series[idx].rix = sc->sc_rixmap[mcs];
+			series_rix  = series[idx].rix;
+
+			/* XXX: Give me some cleanup love */
+			if ((flags & ATH_RC_CW40_FLAG) &&
+				(flags & ATH_RC_SGI_FLAG))
+				rix = rate_table->info[series_rix].ht_index;
+			else if (flags & ATH_RC_SGI_FLAG)
+				rix = rate_table->info[series_rix].sgi_index;
+			else if (flags & ATH_RC_CW40_FLAG)
+				rix = rate_table->info[series_rix].cw40index;
+			else
+				rix = rate_table->info[series_rix].base_index;
+			series[idx].max_4ms_framelen =
+				rate_table->info[rix].max_4ms_framelen;
+			series[idx].flags = flags;
+		}
+	}
+}
+
+static void ath_rc_update_ht(struct ath_softc *sc,
+			     struct ath_rate_node *ath_rc_priv,
+			     struct ath_tx_info_priv *info_priv,
+			     int tx_rate, int xretries, int retries)
+{
+	struct ath_tx_ratectrl *rate_ctrl;
+	u32 now_msec = jiffies_to_msecs(jiffies);
+	int state_change = FALSE, rate, count;
+	u8 last_per;
+	struct ath_rate_softc  *asc = (struct ath_rate_softc *)sc->sc_rc;
+	struct ath_rate_table *rate_table =
+		(struct ath_rate_table *)asc->hw_rate_table[sc->sc_curmode];
+
+	static u32 nretry_to_per_lookup[10] = {
+		100 * 0 / 1,
+		100 * 1 / 4,
+		100 * 1 / 2,
+		100 * 3 / 4,
+		100 * 4 / 5,
+		100 * 5 / 6,
+		100 * 6 / 7,
+		100 * 7 / 8,
+		100 * 8 / 9,
+		100 * 9 / 10
+	};
+
+	if (!ath_rc_priv)
+		return;
+
+	rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv);
+
+	ASSERT(tx_rate >= 0);
+	if (tx_rate < 0)
+		return;
+
+	/* To compensate for some imbalance between ctrl and ext. channel */
+
+	if (WLAN_RC_PHY_40(rate_table->info[tx_rate].phy))
+		info_priv->tx.ts_rssi =
+			info_priv->tx.ts_rssi < 3 ? 0 :
+			info_priv->tx.ts_rssi - 3;
+
+	last_per = rate_ctrl->state[tx_rate].per;
+
+	if (xretries) {
+		/* Update the PER. */
+		if (xretries == 1) {
+			rate_ctrl->state[tx_rate].per += 30;
+			if (rate_ctrl->state[tx_rate].per > 100)
+				rate_ctrl->state[tx_rate].per = 100;
+		} else {
+			/* xretries == 2 */
+			count = sizeof(nretry_to_per_lookup) /
+					sizeof(nretry_to_per_lookup[0]);
+			if (retries >= count)
+				retries = count - 1;
+			/* new_PER = 7/8*old_PER + 1/8*(currentPER) */
+			rate_ctrl->state[tx_rate].per =
+				(u8)(rate_ctrl->state[tx_rate].per -
+				(rate_ctrl->state[tx_rate].per >> 3) +
+				((100) >> 3));
+		}
+
+		/* xretries == 1 or 2 */
+
+		if (rate_ctrl->probe_rate == tx_rate)
+			rate_ctrl->probe_rate = 0;
+
+	} else {	/* xretries == 0 */
+		/* Update the PER. */
+		/* Make sure it doesn't index out of array's bounds. */
+		count = sizeof(nretry_to_per_lookup) /
+			sizeof(nretry_to_per_lookup[0]);
+		if (retries >= count)
+			retries = count - 1;
+		if (info_priv->n_bad_frames) {
+			/* new_PER = 7/8*old_PER + 1/8*(currentPER)  */
+			/*
+			 * Assuming that n_frames is not 0.  The current PER
+			 * from the retries is 100 * retries / (retries+1),
+			 * since the first retries attempts failed, and the
+			 * next one worked.  For the one that worked,
+			 * n_bad_frames subframes out of n_frames wored,
+			 * so the PER for that part is
+			 * 100 * n_bad_frames / n_frames, and it contributes
+			 * 100 * n_bad_frames / (n_frames * (retries+1)) to
+			 * the above PER.  The expression below is a
+			 * simplified version of the sum of these two terms.
+			 */
+			if (info_priv->n_frames > 0)
+				rate_ctrl->state[tx_rate].per
+				      = (u8)
+					(rate_ctrl->state[tx_rate].per -
+					(rate_ctrl->state[tx_rate].per >> 3) +
+					((100*(retries*info_priv->n_frames +
+					info_priv->n_bad_frames) /
+					(info_priv->n_frames *
+						(retries+1))) >> 3));
+		} else {
+			/* new_PER = 7/8*old_PER + 1/8*(currentPER) */
+
+			rate_ctrl->state[tx_rate].per = (u8)
+				(rate_ctrl->state[tx_rate].per -
+				(rate_ctrl->state[tx_rate].per >> 3) +
+				(nretry_to_per_lookup[retries] >> 3));
+		}
+
+		rate_ctrl->rssi_last_prev2 = rate_ctrl->rssi_last_prev;
+		rate_ctrl->rssi_last_prev  = rate_ctrl->rssi_last;
+		rate_ctrl->rssi_last = info_priv->tx.ts_rssi;
+		rate_ctrl->rssi_time = now_msec;
+
+		/*
+		 * If we got at most one retry then increase the max rate if
+		 * this was a probe.  Otherwise, ignore the probe.
+		 */
+
+		if (rate_ctrl->probe_rate && rate_ctrl->probe_rate == tx_rate) {
+			if (retries > 0 || 2 * info_priv->n_bad_frames >
+				info_priv->n_frames) {
+				/*
+				 * Since we probed with just a single attempt,
+				 * any retries means the probe failed.  Also,
+				 * if the attempt worked, but more than half
+				 * the subframes were bad then also consider
+				 * the probe a failure.
+				 */
+				rate_ctrl->probe_rate = 0;
+			} else {
+				u8 probe_rate = 0;
+
+				rate_ctrl->rate_max_phy = rate_ctrl->probe_rate;
+				probe_rate = rate_ctrl->probe_rate;
+
+				if (rate_ctrl->state[probe_rate].per > 30)
+					rate_ctrl->state[probe_rate].per = 20;
+
+				rate_ctrl->probe_rate = 0;
+
+				/*
+				 * Since this probe succeeded, we allow the next
+				 * probe twice as soon.  This allows the maxRate
+				 * to move up faster if the probes are
+				 * succesful.
+				 */
+				rate_ctrl->probe_time = now_msec -
+					rate_table->probe_interval / 2;
+			}
+		}
+
+		if (retries > 0) {
+			/*
+			 * Don't update anything.  We don't know if
+			 * this was because of collisions or poor signal.
+			 *
+			 * Later: if rssi_ack is close to
+			 * rate_ctrl->state[txRate].rssi_thres and we see lots
+			 * of retries, then we could increase
+			 * rate_ctrl->state[txRate].rssi_thres.
+			 */
+			rate_ctrl->hw_maxretry_pktcnt = 0;
+		} else {
+			/*
+			 * It worked with no retries. First ignore bogus (small)
+			 * rssi_ack values.
+			 */
+			if (tx_rate == rate_ctrl->rate_max_phy &&
+					rate_ctrl->hw_maxretry_pktcnt < 255) {
+				rate_ctrl->hw_maxretry_pktcnt++;
+			}
+
+			if (info_priv->tx.ts_rssi >=
+				rate_table->info[tx_rate].rssi_ack_validmin) {
+				/* Average the rssi */
+				if (tx_rate != rate_ctrl->rssi_sum_rate) {
+					rate_ctrl->rssi_sum_rate = tx_rate;
+					rate_ctrl->rssi_sum =
+						rate_ctrl->rssi_sum_cnt = 0;
+				}
+
+				rate_ctrl->rssi_sum += info_priv->tx.ts_rssi;
+				rate_ctrl->rssi_sum_cnt++;
+
+				if (rate_ctrl->rssi_sum_cnt > 4) {
+					int32_t rssi_ackAvg =
+						(rate_ctrl->rssi_sum + 2) / 4;
+					int8_t rssi_thres =
+						rate_ctrl->state[tx_rate].
+						rssi_thres;
+					int8_t rssi_ack_vmin =
+						rate_table->info[tx_rate].
+						rssi_ack_validmin;
+
+					rate_ctrl->rssi_sum =
+						rate_ctrl->rssi_sum_cnt = 0;
+
+					/* Now reduce the current
+					 * rssi threshold. */
+					if ((rssi_ackAvg < rssi_thres + 2) &&
+						(rssi_thres > rssi_ack_vmin)) {
+						rate_ctrl->state[tx_rate].
+							rssi_thres--;
+					}
+
+					state_change = TRUE;
+				}
+			}
+		}
+	}
+
+	/* For all cases */
+
+	/*
+	 * If this rate looks bad (high PER) then stop using it for
+	 * a while (except if we are probing).
+	 */
+	if (rate_ctrl->state[tx_rate].per >= 55 && tx_rate > 0 &&
+			rate_table->info[tx_rate].ratekbps <=
+			rate_table->info[rate_ctrl->rate_max_phy].ratekbps) {
+		ath_rc_get_nextlowervalid_txrate(rate_table, rate_ctrl,
+				(u8) tx_rate, &rate_ctrl->rate_max_phy);
+
+		/* Don't probe for a little while. */
+		rate_ctrl->probe_time = now_msec;
+	}
+
+	if (state_change) {
+		/*
+		 * Make sure the rates above this have higher rssi thresholds.
+		 * (Note:  Monotonicity is kept within the OFDM rates and
+		 *         within the CCK rates. However, no adjustment is
+		 *         made to keep the rssi thresholds monotonically
+		 *         increasing between the CCK and OFDM rates.)
+		 */
+		for (rate = tx_rate; rate <
+				rate_ctrl->rate_table_size - 1; rate++) {
+			if (rate_table->info[rate+1].phy !=
+				rate_table->info[tx_rate].phy)
+				break;
+
+			if (rate_ctrl->state[rate].rssi_thres +
+				rate_table->info[rate].rssi_ack_deltamin >
+					rate_ctrl->state[rate+1].rssi_thres) {
+				rate_ctrl->state[rate+1].rssi_thres =
+					rate_ctrl->state[rate].
+						rssi_thres +
+					rate_table->info[rate].
+						rssi_ack_deltamin;
+			}
+		}
+
+		/* Make sure the rates below this have lower rssi thresholds. */
+		for (rate = tx_rate - 1; rate >= 0; rate--) {
+			if (rate_table->info[rate].phy !=
+				rate_table->info[tx_rate].phy)
+				break;
+
+			if (rate_ctrl->state[rate].rssi_thres +
+				rate_table->info[rate].rssi_ack_deltamin >
+					rate_ctrl->state[rate+1].rssi_thres) {
+				if (rate_ctrl->state[rate+1].rssi_thres <
+					rate_table->info[rate].
+					rssi_ack_deltamin)
+					rate_ctrl->state[rate].rssi_thres = 0;
+				else {
+					rate_ctrl->state[rate].rssi_thres =
+						rate_ctrl->state[rate+1].
+							rssi_thres -
+							rate_table->info[rate].
+							rssi_ack_deltamin;
+				}
+
+				if (rate_ctrl->state[rate].rssi_thres <
+					rate_table->info[rate].
+						rssi_ack_validmin) {
+					rate_ctrl->state[rate].rssi_thres =
+						rate_table->info[rate].
+							rssi_ack_validmin;
+				}
+			}
+		}
+	}
+
+	/* Make sure the rates below this have lower PER */
+	/* Monotonicity is kept only for rates below the current rate. */
+	if (rate_ctrl->state[tx_rate].per < last_per) {
+		for (rate = tx_rate - 1; rate >= 0; rate--) {
+			if (rate_table->info[rate].phy !=
+				rate_table->info[tx_rate].phy)
+				break;
+
+			if (rate_ctrl->state[rate].per >
+					rate_ctrl->state[rate+1].per) {
+				rate_ctrl->state[rate].per =
+					rate_ctrl->state[rate+1].per;
+			}
+		}
+	}
+
+	/* Maintain monotonicity for rates above the current rate */
+	for (rate = tx_rate; rate < rate_ctrl->rate_table_size - 1; rate++) {
+		if (rate_ctrl->state[rate+1].per < rate_ctrl->state[rate].per)
+			rate_ctrl->state[rate+1].per =
+				rate_ctrl->state[rate].per;
+	}
+
+	/* Every so often, we reduce the thresholds and
+	 * PER (different for CCK and OFDM). */
+	if (now_msec - rate_ctrl->rssi_down_time >=
+		rate_table->rssi_reduce_interval) {
+
+		for (rate = 0; rate < rate_ctrl->rate_table_size; rate++) {
+			if (rate_ctrl->state[rate].rssi_thres >
+				rate_table->info[rate].rssi_ack_validmin)
+				rate_ctrl->state[rate].rssi_thres -= 1;
+		}
+		rate_ctrl->rssi_down_time = now_msec;
+	}
+
+	/* Every so often, we reduce the thresholds
+	 * and PER (different for CCK and OFDM). */
+	if (now_msec - rate_ctrl->per_down_time >=
+		rate_table->rssi_reduce_interval) {
+		for (rate = 0; rate < rate_ctrl->rate_table_size; rate++) {
+			rate_ctrl->state[rate].per =
+				7 * rate_ctrl->state[rate].per / 8;
+		}
+
+		rate_ctrl->per_down_time = now_msec;
+	}
+}
+
+/*
+ * This routine is called in rate control callback tx_status() to give
+ * the status of previous frames.
+ */
+static void ath_rc_update(struct ath_softc *sc,
+			  struct ath_rate_node *ath_rc_priv,
+			  struct ath_tx_info_priv *info_priv, int final_ts_idx,
+			  int xretries, int long_retry)
+{
+	struct ath_rate_softc  *asc = (struct ath_rate_softc *)sc->sc_rc;
+	struct ath_rate_table *rate_table;
+	struct ath_tx_ratectrl *rate_ctrl;
+	struct ath_rc_series rcs[4];
+	u8 flags;
+	u32 series = 0, rix;
+
+	memcpy(rcs, info_priv->rcs, 4 * sizeof(rcs[0]));
+	rate_table = (struct ath_rate_table *)
+		asc->hw_rate_table[sc->sc_curmode];
+	rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv);
+	ASSERT(rcs[0].tries != 0);
+
+	/*
+	 * If the first rate is not the final index, there
+	 * are intermediate rate failures to be processed.
+	 */
+	if (final_ts_idx != 0) {
+		/* Process intermediate rates that failed.*/
+		for (series = 0; series < final_ts_idx ; series++) {
+			if (rcs[series].tries != 0) {
+				flags = rcs[series].flags;
+				/* If HT40 and we have switched mode from
+				 * 40 to 20 => don't update */
+				if ((flags & ATH_RC_CW40_FLAG) &&
+					(rate_ctrl->rc_phy_mode !=
+					(flags & ATH_RC_CW40_FLAG)))
+					return;
+				if ((flags & ATH_RC_CW40_FLAG) &&
+					(flags & ATH_RC_SGI_FLAG))
+					rix = rate_table->info[
+						rcs[series].rix].ht_index;
+				else if (flags & ATH_RC_SGI_FLAG)
+					rix = rate_table->info[
+						rcs[series].rix].sgi_index;
+				else if (flags & ATH_RC_CW40_FLAG)
+					rix = rate_table->info[
+						rcs[series].rix].cw40index;
+				else
+					rix = rate_table->info[
+						rcs[series].rix].base_index;
+				ath_rc_update_ht(sc, ath_rc_priv,
+						info_priv, rix,
+						xretries ? 1 : 2,
+						rcs[series].tries);
+			}
+		}
+	} else {
+		/*
+		 * Handle the special case of MIMO PS burst, where the second
+		 * aggregate is sent out with only one rate and one try.
+		 * Treating it as an excessive retry penalizes the rate
+		 * inordinately.
+		 */
+		if (rcs[0].tries == 1 && xretries == 1)
+			xretries = 2;
+	}
+
+	flags = rcs[series].flags;
+	/* If HT40 and we have switched mode from 40 to 20 => don't update */
+	if ((flags & ATH_RC_CW40_FLAG) &&
+		(rate_ctrl->rc_phy_mode != (flags & ATH_RC_CW40_FLAG)))
+		return;
+
+	if ((flags & ATH_RC_CW40_FLAG) && (flags & ATH_RC_SGI_FLAG))
+		rix = rate_table->info[rcs[series].rix].ht_index;
+	else if (flags & ATH_RC_SGI_FLAG)
+		rix = rate_table->info[rcs[series].rix].sgi_index;
+	else if (flags & ATH_RC_CW40_FLAG)
+		rix = rate_table->info[rcs[series].rix].cw40index;
+	else
+		rix = rate_table->info[rcs[series].rix].base_index;
+
+	ath_rc_update_ht(sc, ath_rc_priv, info_priv, rix,
+		xretries, long_retry);
+}
+
+
+/*
+ * Process a tx descriptor for a completed transmit (success or failure).
+ */
+static void ath_rate_tx_complete(struct ath_softc *sc,
+				 struct ath_node *an,
+				 struct ath_rate_node *rc_priv,
+				 struct ath_tx_info_priv *info_priv)
+{
+	int final_ts_idx = info_priv->tx.ts_rateindex;
+	int tx_status = 0, is_underrun = 0;
+	struct ath_vap *avp;
+
+	avp = rc_priv->avp;
+	if ((avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE)
+			|| info_priv->tx.ts_status & ATH9K_TXERR_FILT)
+		return;
+
+	if (info_priv->tx.ts_rssi > 0) {
+		ATH_RSSI_LPF(an->an_chainmask_sel.tx_avgrssi,
+				info_priv->tx.ts_rssi);
+	}
+
+	/*
+	 * If underrun error is seen assume it as an excessive retry only
+	 * if prefetch trigger level have reached the max (0x3f for 5416)
+	 * Adjust the long retry as if the frame was tried ATH_11N_TXMAXTRY
+	 * times. This affects how ratectrl updates PER for the failed rate.
+	 */
+	if (info_priv->tx.ts_flags &
+		(ATH9K_TX_DATA_UNDERRUN | ATH9K_TX_DELIM_UNDERRUN) &&
+		((sc->sc_ah->ah_txTrigLevel) >= tx_triglevel_max)) {
+		tx_status = 1;
+		is_underrun = 1;
+	}
+
+	if ((info_priv->tx.ts_status & ATH9K_TXERR_XRETRY) ||
+			(info_priv->tx.ts_status & ATH9K_TXERR_FIFO))
+		tx_status = 1;
+
+	ath_rc_update(sc, rc_priv, info_priv, final_ts_idx, tx_status,
+		      (is_underrun) ? ATH_11N_TXMAXTRY :
+		      info_priv->tx.ts_longretry);
+}
+
+
+/*
+ *  Update the SIB's rate control information
+ *
+ *  This should be called when the supported rates change
+ *  (e.g. SME operation, wireless mode change)
+ *
+ *  It will determine which rates are valid for use.
+ */
+static void ath_rc_sib_update(struct ath_softc *sc,
+			      struct ath_rate_node *ath_rc_priv,
+			      u32 capflag, int keep_state,
+			      struct ath_rateset *negotiated_rates,
+			      struct ath_rateset *negotiated_htrates)
+{
+	struct ath_rate_table *rate_table = NULL;
+	struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc;
+	struct ath_rateset *rateset = negotiated_rates;
+	u8 *ht_mcs = (u8 *)negotiated_htrates;
+	struct ath_tx_ratectrl *rate_ctrl  = (struct ath_tx_ratectrl *)
+		(ath_rc_priv);
+	u8 i, j, k, hi = 0, hthi = 0;
+
+	rate_table = (struct ath_rate_table *)
+		asc->hw_rate_table[sc->sc_curmode];
+
+	/* Initial rate table size. Will change depending
+	 * on the working rate set */
+	rate_ctrl->rate_table_size = MAX_TX_RATE_TBL;
+
+	/* Initialize thresholds according to the global rate table */
+	for (i = 0 ; (i < rate_ctrl->rate_table_size) && (!keep_state); i++) {
+		rate_ctrl->state[i].rssi_thres =
+			rate_table->info[i].rssi_ack_validmin;
+		rate_ctrl->state[i].per = 0;
+	}
+
+	/* Determine the valid rates */
+	ath_rc_init_valid_txmask(rate_ctrl);
+
+	for (i = 0; i < WLAN_RC_PHY_MAX; i++) {
+		for (j = 0; j < MAX_TX_RATE_PHY; j++)
+			rate_ctrl->valid_phy_rateidx[i][j] = 0;
+		rate_ctrl->valid_phy_ratecnt[i] = 0;
+	}
+	rate_ctrl->rc_phy_mode = (capflag & WLAN_RC_40_FLAG);
+
+	/* Set stream capability */
+	ath_rc_priv->single_stream = (capflag & WLAN_RC_DS_FLAG) ? 0 : 1;
+
+	if (!rateset->rs_nrates) {
+		/* No working rate, just initialize valid rates */
+		hi = ath_rc_sib_init_validrates(ath_rc_priv, rate_table,
+						capflag);
+	} else {
+		/* Use intersection of working rates and valid rates */
+		hi = ath_rc_sib_setvalid_rates(ath_rc_priv, rate_table,
+					       rateset, capflag);
+		if (capflag & WLAN_RC_HT_FLAG) {
+			hthi = ath_rc_sib_setvalid_htrates(ath_rc_priv,
+							   rate_table,
+							   ht_mcs,
+							   capflag);
+		}
+		hi = A_MAX(hi, hthi);
+	}
+
+	rate_ctrl->rate_table_size = hi + 1;
+	rate_ctrl->rate_max_phy = 0;
+	ASSERT(rate_ctrl->rate_table_size <= MAX_TX_RATE_TBL);
+
+	for (i = 0, k = 0; i < WLAN_RC_PHY_MAX; i++) {
+		for (j = 0; j < rate_ctrl->valid_phy_ratecnt[i]; j++) {
+			rate_ctrl->valid_rate_index[k++] =
+				rate_ctrl->valid_phy_rateidx[i][j];
+		}
+
+		if (!ath_rc_valid_phyrate(i, rate_table->initial_ratemax, TRUE)
+		    || !rate_ctrl->valid_phy_ratecnt[i])
+			continue;
+
+		rate_ctrl->rate_max_phy = rate_ctrl->valid_phy_rateidx[i][j-1];
+	}
+	ASSERT(rate_ctrl->rate_table_size <= MAX_TX_RATE_TBL);
+	ASSERT(k <= MAX_TX_RATE_TBL);
+
+	rate_ctrl->max_valid_rate = k;
+	/*
+	 * Some third party vendors don't send the supported rate series in
+	 * order. So sorting to make sure its in order, otherwise our RateFind
+	 * Algo will select wrong rates
+	 */
+	ath_rc_sort_validrates(rate_table, rate_ctrl);
+	rate_ctrl->rate_max_phy = rate_ctrl->valid_rate_index[k-4];
+}
+
+/*
+ * Update rate-control state on station associate/reassociate.
+ */
+static int ath_rate_newassoc(struct ath_softc *sc,
+			     struct ath_rate_node *ath_rc_priv,
+			     unsigned int capflag,
+			     struct ath_rateset *negotiated_rates,
+			     struct ath_rateset *negotiated_htrates)
+{
+
+
+	ath_rc_priv->ht_cap =
+		((capflag & ATH_RC_DS_FLAG) ? WLAN_RC_DS_FLAG : 0) |
+		((capflag & ATH_RC_SGI_FLAG) ? WLAN_RC_SGI_FLAG : 0) |
+		((capflag & ATH_RC_HT_FLAG)  ? WLAN_RC_HT_FLAG : 0) |
+		((capflag & ATH_RC_CW40_FLAG) ? WLAN_RC_40_FLAG : 0);
+
+	ath_rc_sib_update(sc, ath_rc_priv, ath_rc_priv->ht_cap, 0,
+			  negotiated_rates, negotiated_htrates);
+
+	return 0;
+}
+
+/*
+ *  This routine is called to initialize the rate control parameters
+ *  in the SIB. It is called initially during system initialization
+ *  or when a station is associated with the AP.
+ */
+static void ath_rc_sib_init(struct ath_rate_node *ath_rc_priv)
+{
+	struct ath_tx_ratectrl *rate_ctrl;
+
+	rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv);
+	rate_ctrl->rssi_down_time = jiffies_to_msecs(jiffies);
+}
+
+
+static void ath_setup_rates(struct ieee80211_local *local, struct sta_info *sta)
+
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_hw *hw = local_to_hw(local);
+	struct ath_softc *sc = hw->priv;
+	struct ath_rate_node *rc_priv = sta->rate_ctrl_priv;
+	int i, j = 0;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s", __func__);
+	sband =  local->hw.wiphy->bands[local->hw.conf.channel->band];
+	for (i = 0; i < sband->n_bitrates; i++) {
+		if (sta->supp_rates[local->hw.conf.channel->band] & BIT(i)) {
+			rc_priv->neg_rates.rs_rates[j]
+				= (sband->bitrates[i].bitrate * 2) / 10;
+			j++;
+		}
+	}
+	rc_priv->neg_rates.rs_nrates = j;
+}
+
+void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv)
+{
+	struct ath_softc *sc = hw->priv;
+	u32 capflag = 0;
+
+	if (hw->conf.ht_conf.ht_supported) {
+		capflag |= ATH_RC_HT_FLAG | ATH_RC_DS_FLAG;
+		if (sc->sc_ht_info.tx_chan_width == ATH9K_HT_MACMODE_2040)
+			capflag |= ATH_RC_CW40_FLAG;
+	}
+
+	ath_rate_newassoc(sc, rc_priv, capflag,
+			  &rc_priv->neg_rates,
+			  &rc_priv->neg_ht_rates);
+
+}
+
+/* Rate Control callbacks */
+static void ath_tx_status(void *priv, struct net_device *dev,
+			  struct sk_buff *skb)
+{
+	struct ath_softc *sc = priv;
+	struct ath_tx_info_priv *tx_info_priv;
+	struct ath_node *an;
+	struct sta_info *sta;
+	struct ieee80211_local *local;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr;
+	__le16 fc;
+
+	local = hw_to_local(sc->hw);
+	hdr = (struct ieee80211_hdr *)skb->data;
+	fc = hdr->frame_control;
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, hdr->addr1);
+	spin_unlock_bh(&sc->node_lock);
+
+	sta = sta_info_get(local, hdr->addr1);
+	if (!an || !sta || !ieee80211_is_data(fc)) {
+		if (tx_info->driver_data[0] != NULL) {
+			kfree(tx_info->driver_data[0]);
+			tx_info->driver_data[0] = NULL;
+		}
+		return;
+	}
+	if (tx_info->driver_data[0] != NULL) {
+		ath_rate_tx_complete(sc, an, sta->rate_ctrl_priv, tx_info_priv);
+		kfree(tx_info->driver_data[0]);
+		tx_info->driver_data[0] = NULL;
+	}
+}
+
+static void ath_tx_aggr_resp(struct ath_softc *sc,
+			     struct sta_info *sta,
+			     struct ath_node *an,
+			     u8 tidno)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_local *local;
+	struct ath_atx_tid *txtid;
+	struct ieee80211_supported_band *sband;
+	u16 buffersize = 0;
+	int state;
+	DECLARE_MAC_BUF(mac);
+
+	if (!sc->sc_txaggr)
+		return;
+
+	txtid = ATH_AN_2_TID(an, tidno);
+	if (!txtid->paused)
+		return;
+
+	local = hw_to_local(sc->hw);
+	sband = hw->wiphy->bands[hw->conf.channel->band];
+	buffersize = IEEE80211_MIN_AMPDU_BUF <<
+		sband->ht_info.ampdu_factor; /* FIXME */
+	state = sta->ampdu_mlme.tid_state_tx[tidno];
+
+	if (state & HT_ADDBA_RECEIVED_MSK) {
+		txtid->addba_exchangecomplete = 1;
+		txtid->addba_exchangeinprogress = 0;
+		txtid->baw_size = buffersize;
+
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: Resuming tid, buffersize: %d\n",
+			__func__,
+			buffersize);
+
+		ath_tx_resume_tid(sc, txtid);
+	}
+}
+
+static void ath_get_rate(void *priv, struct net_device *dev,
+			 struct ieee80211_supported_band *sband,
+			 struct sk_buff *skb,
+			 struct rate_selection *sel)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct sta_info *sta;
+	struct ath_softc *sc = (struct ath_softc *)priv;
+	struct ieee80211_hw *hw = sc->hw;
+	struct ath_tx_info_priv *tx_info_priv;
+	struct ath_rate_node *ath_rc_priv;
+	struct ath_node *an;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	int is_probe, chk, ret;
+	s8 lowest_idx;
+	__le16 fc = hdr->frame_control;
+	u8 *qc, tid;
+	DECLARE_MAC_BUF(mac);
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__);
+
+	/* allocate driver private area of tx_info */
+	tx_info->driver_data[0] = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC);
+	ASSERT(tx_info->driver_data[0] != NULL);
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+
+	sta = sta_info_get(local, hdr->addr1);
+	lowest_idx = rate_lowest_index(local, sband, sta);
+	tx_info_priv->min_rate = (sband->bitrates[lowest_idx].bitrate * 2) / 10;
+	/* lowest rate for management and multicast/broadcast frames */
+	if (!ieee80211_is_data(fc) ||
+			is_multicast_ether_addr(hdr->addr1) || !sta) {
+		sel->rate_idx = lowest_idx;
+		return;
+	}
+
+	ath_rc_priv = sta->rate_ctrl_priv;
+
+	/* Find tx rate for unicast frames */
+	ath_rate_findrate(sc, ath_rc_priv,
+			  ATH_11N_TXMAXTRY, 4,
+			  ATH_RC_PROBE_ALLOWED,
+			  tx_info_priv->rcs,
+			  &is_probe,
+			  false);
+	if (is_probe)
+		sel->probe_idx = ((struct ath_tx_ratectrl *)
+			sta->rate_ctrl_priv)->probe_rate;
+
+	/* Ratecontrol sometimes returns invalid rate index */
+	if (tx_info_priv->rcs[0].rix != 0xff)
+		ath_rc_priv->prev_data_rix = tx_info_priv->rcs[0].rix;
+	else
+		tx_info_priv->rcs[0].rix = ath_rc_priv->prev_data_rix;
+
+	sel->rate_idx = tx_info_priv->rcs[0].rix;
+
+	/* Check if aggregation has to be enabled for this tid */
+
+	if (hw->conf.ht_conf.ht_supported) {
+		if (ieee80211_is_data_qos(fc)) {
+			qc = ieee80211_get_qos_ctl(hdr);
+			tid = qc[0] & 0xf;
+
+			spin_lock_bh(&sc->node_lock);
+			an = ath_node_find(sc, hdr->addr1);
+			spin_unlock_bh(&sc->node_lock);
+
+			if (!an) {
+				DPRINTF(sc, ATH_DBG_AGGR,
+					"%s: Node not found to "
+					"init/chk TX aggr\n", __func__);
+				return;
+			}
+
+			chk = ath_tx_aggr_check(sc, an, tid);
+			if (chk == AGGR_REQUIRED) {
+				ret = ieee80211_start_tx_ba_session(hw,
+					hdr->addr1, tid);
+				if (ret)
+					DPRINTF(sc, ATH_DBG_AGGR,
+						"%s: Unable to start tx "
+						"aggr for: %s\n",
+						__func__,
+						print_mac(mac, hdr->addr1));
+				else
+					DPRINTF(sc, ATH_DBG_AGGR,
+						"%s: Started tx aggr for: %s\n",
+						__func__,
+						print_mac(mac, hdr->addr1));
+			} else if (chk == AGGR_EXCHANGE_PROGRESS)
+				ath_tx_aggr_resp(sc, sta, an, tid);
+		}
+	}
+}
+
+static void ath_rate_init(void *priv, void *priv_sta,
+			  struct ieee80211_local *local,
+			  struct sta_info *sta)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_hw *hw = local_to_hw(local);
+	struct ieee80211_conf *conf = &local->hw.conf;
+	struct ath_softc *sc = hw->priv;
+	int i, j = 0;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__);
+
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+	sta->txrate_idx = rate_lowest_index(local, sband, sta);
+
+	ath_setup_rates(local, sta);
+	if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
+		for (i = 0; i < MCS_SET_SIZE; i++) {
+			if (conf->ht_conf.supp_mcs_set[i/8] & (1<<(i%8)))
+				((struct ath_rate_node *)
+				priv_sta)->neg_ht_rates.rs_rates[j++] = i;
+			if (j == ATH_RATE_MAX)
+				break;
+		}
+		((struct ath_rate_node *)priv_sta)->neg_ht_rates.rs_nrates = j;
+	}
+	ath_rc_node_update(hw, priv_sta);
+}
+
+static void ath_rate_clear(void *priv)
+{
+	return;
+}
+
+static void *ath_rate_alloc(struct ieee80211_local *local)
+{
+	struct ieee80211_hw *hw = local_to_hw(local);
+	struct ath_softc *sc = hw->priv;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s", __func__);
+	return local->hw.priv;
+}
+
+static void ath_rate_free(void *priv)
+{
+	return;
+}
+
+static void *ath_rate_alloc_sta(void *priv, gfp_t gfp)
+{
+	struct ath_softc *sc = priv;
+	struct ath_vap *avp = sc->sc_vaps[0];
+	struct ath_rate_node *rate_priv;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s", __func__);
+	rate_priv = ath_rate_node_alloc(avp, sc->sc_rc, gfp);
+	if (!rate_priv) {
+		DPRINTF(sc, ATH_DBG_FATAL, "%s:Unable to allocate"
+				"private rate control structure", __func__);
+		return NULL;
+	}
+	ath_rc_sib_init(rate_priv);
+	return rate_priv;
+}
+
+static void ath_rate_free_sta(void *priv, void *priv_sta)
+{
+	struct ath_rate_node *rate_priv = priv_sta;
+	struct ath_softc *sc = priv;
+
+	DPRINTF(sc, ATH_DBG_RATE, "%s", __func__);
+	ath_rate_node_free(rate_priv);
+}
+
+static struct rate_control_ops ath_rate_ops = {
+	.module = NULL,
+	.name = "ath9k_rate_control",
+	.tx_status = ath_tx_status,
+	.get_rate = ath_get_rate,
+	.rate_init = ath_rate_init,
+	.clear = ath_rate_clear,
+	.alloc = ath_rate_alloc,
+	.free = ath_rate_free,
+	.alloc_sta = ath_rate_alloc_sta,
+	.free_sta = ath_rate_free_sta
+};
+
+int ath_rate_control_register(void)
+{
+	return ieee80211_rate_control_register(&ath_rate_ops);
+}
+
+void ath_rate_control_unregister(void)
+{
+	ieee80211_rate_control_unregister(&ath_rate_ops);
+}
+
diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h
new file mode 100644
index 00000000000..71aef9c7523
--- /dev/null
+++ b/drivers/net/wireless/ath9k/rc.h
@@ -0,0 +1,316 @@
+/*
+ * Copyright (c) 2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004 Video54 Technologies, Inc.
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef RC_H
+#define RC_H
+
+#include "ath9k.h"
+/*
+ * Interface definitions for transmit rate control modules for the
+ * Atheros driver.
+ *
+ * A rate control module is responsible for choosing the transmit rate
+ * for each data frame.  Management+control frames are always sent at
+ * a fixed rate.
+ *
+ * Only one module may be present at a time; the driver references
+ * rate control interfaces by symbol name.  If multiple modules are
+ * to be supported we'll need to switch to a registration-based scheme
+ * as is currently done, for example, for authentication modules.
+ *
+ * An instance of the rate control module is attached to each device
+ * at attach time and detached when the device is destroyed.  The module
+ * may associate data with each device and each node (station).  Both
+ * sets of storage are opaque except for the size of the per-node storage
+ * which must be provided when the module is attached.
+ *
+ * The rate control module is notified for each state transition and
+ * station association/reassociation.  Otherwise it is queried for a
+ * rate for each outgoing frame and provided status from each transmitted
+ * frame.  Any ancillary processing is the responsibility of the module
+ * (e.g. if periodic processing is required then the module should setup
+ * it's own timer).
+ *
+ * In addition to the transmit rate for each frame the module must also
+ * indicate the number of attempts to make at the specified rate.  If this
+ * number is != ATH_TXMAXTRY then an additional callback is made to setup
+ * additional transmit state.  The rate control code is assumed to write
+ * this additional data directly to the transmit descriptor.
+ */
+
+struct ath_softc;
+
+#define TRUE 1
+#define FALSE 0
+
+#define ATH_RATE_MAX	30
+#define MCS_SET_SIZE	128
+
+enum ieee80211_fixed_rate_mode {
+	IEEE80211_FIXED_RATE_NONE  = 0,
+	IEEE80211_FIXED_RATE_MCS   = 1  /* HT rates */
+};
+
+/*
+ * Use the hal os glue code to get ms time
+ */
+#define IEEE80211_RATE_IDX_ENTRY(val, idx) (((val&(0xff<<(idx*8)))>>(idx*8)))
+
+#define SHORT_PRE 1
+#define LONG_PRE 0
+
+#define WLAN_PHY_HT_20_SS       WLAN_RC_PHY_HT_20_SS
+#define WLAN_PHY_HT_20_DS       WLAN_RC_PHY_HT_20_DS
+#define WLAN_PHY_HT_20_DS_HGI   WLAN_RC_PHY_HT_20_DS_HGI
+#define WLAN_PHY_HT_40_SS       WLAN_RC_PHY_HT_40_SS
+#define WLAN_PHY_HT_40_SS_HGI   WLAN_RC_PHY_HT_40_SS_HGI
+#define WLAN_PHY_HT_40_DS       WLAN_RC_PHY_HT_40_DS
+#define WLAN_PHY_HT_40_DS_HGI   WLAN_RC_PHY_HT_40_DS_HGI
+
+#define WLAN_PHY_OFDM	PHY_OFDM
+#define WLAN_PHY_CCK	PHY_CCK
+
+#define TRUE_20		0x2
+#define TRUE_40		0x4
+#define TRUE_2040	(TRUE_20|TRUE_40)
+#define TRUE_ALL	(TRUE_2040|TRUE)
+
+enum {
+	WLAN_RC_PHY_HT_20_SS = 4,
+	WLAN_RC_PHY_HT_20_DS,
+	WLAN_RC_PHY_HT_40_SS,
+	WLAN_RC_PHY_HT_40_DS,
+	WLAN_RC_PHY_HT_20_SS_HGI,
+	WLAN_RC_PHY_HT_20_DS_HGI,
+	WLAN_RC_PHY_HT_40_SS_HGI,
+	WLAN_RC_PHY_HT_40_DS_HGI,
+	WLAN_RC_PHY_MAX
+};
+
+#define WLAN_RC_PHY_DS(_phy)   ((_phy == WLAN_RC_PHY_HT_20_DS)           \
+	|| (_phy == WLAN_RC_PHY_HT_40_DS)        \
+	|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI)    \
+	|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+#define WLAN_RC_PHY_40(_phy)   ((_phy == WLAN_RC_PHY_HT_40_SS)           \
+	|| (_phy == WLAN_RC_PHY_HT_40_DS)        \
+	|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI)    \
+	|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+#define WLAN_RC_PHY_SGI(_phy)  ((_phy == WLAN_RC_PHY_HT_20_SS_HGI)      \
+	|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI)   \
+	|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI)   \
+	|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+
+#define WLAN_RC_PHY_HT(_phy)    (_phy >= WLAN_RC_PHY_HT_20_SS)
+
+/* Returns the capflag mode */
+#define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ?	\
+		(capflag & WLAN_RC_40_FLAG) ? TRUE_40 : TRUE_20 : TRUE))
+
+/* Return TRUE if flag supports HT20 && client supports HT20 or
+ * return TRUE if flag supports HT40 && client supports HT40.
+ * This is used becos some rates overlap between HT20/HT40.
+ */
+
+#define WLAN_RC_PHY_HT_VALID(flag, capflag) (((flag & TRUE_20) && !(capflag \
+				& WLAN_RC_40_FLAG)) || ((flag & TRUE_40) && \
+				  (capflag & WLAN_RC_40_FLAG)))
+
+#define WLAN_RC_DS_FLAG         (0x01)
+#define WLAN_RC_40_FLAG         (0x02)
+#define WLAN_RC_SGI_FLAG        (0x04)
+#define WLAN_RC_HT_FLAG         (0x08)
+
+/* Index into the rate table */
+#define INIT_RATE_MAX_20	23
+#define INIT_RATE_MAX_40	40
+
+#define RATE_TABLE_SIZE		64
+
+/* XXX: Convert to kdoc */
+struct ath_rate_table {
+	int rate_cnt;
+	struct {
+		int valid;            /* Valid for use in rate control */
+		int valid_single_stream;/* Valid for use in rate control
+					for single stream operation */
+		u8 phy;              /* CCK/OFDM/TURBO/XR */
+		u32 ratekbps;         /* Rate in Kbits per second */
+		u32 user_ratekbps;     /* User rate in KBits per second */
+		u8 ratecode;         /* rate that goes into
+					hw descriptors */
+		u8 short_preamble;    /* Mask for enabling short preamble
+						in rate code for CCK */
+		u8 dot11rate;        /* Value that goes into supported
+					rates info element of MLME */
+		u8 ctrl_rate;      /* Index of next lower basic rate,
+					used for duration computation */
+		int8_t rssi_ack_validmin;  /* Rate control related */
+		int8_t rssi_ack_deltamin;  /* Rate control related */
+		u8 base_index;        /* base rate index */
+		u8 cw40index;        /* 40cap rate index */
+		u8 sgi_index;         /* shortgi rate index */
+		u8 ht_index;          /* shortgi rate index */
+		u32 max_4ms_framelen;   /* Maximum frame length(bytes)
+						for 4ms tx duration */
+	} info[RATE_TABLE_SIZE];
+	u32 probe_interval;        /* interval for ratectrl to
+					probe for other rates */
+	u32 rssi_reduce_interval;   /* interval for ratectrl
+						to reduce RSSI */
+	u8 initial_ratemax;   /* the initial ratemax value used
+					in ath_rc_sib_update() */
+};
+
+#define ATH_RC_PROBE_ALLOWED            0x00000001
+#define ATH_RC_MINRATE_LASTRATE         0x00000002
+#define ATH_RC_SHORT_PREAMBLE           0x00000004
+
+struct ath_rc_series {
+	u8    rix;
+	u8    tries;
+	u8    flags;
+	u32   max_4ms_framelen;
+};
+
+/* rcs_flags definition */
+#define ATH_RC_DS_FLAG               0x01
+#define ATH_RC_CW40_FLAG             0x02    /* CW 40 */
+#define ATH_RC_SGI_FLAG              0x04    /* Short Guard Interval */
+#define ATH_RC_HT_FLAG               0x08    /* HT */
+#define ATH_RC_RTSCTS_FLAG           0x10    /* RTS-CTS */
+
+/*
+ * State structures for new rate adaptation code
+ */
+#define	MAX_TX_RATE_TBL	        64
+#define MAX_TX_RATE_PHY         48
+
+struct ath_tx_ratectrl_state {
+	int8_t rssi_thres; /* required rssi for this rate (dB) */
+	u8 per; /* recent estimate of packet error rate (%) */
+};
+
+struct ath_tx_ratectrl {
+	struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; /* state */
+	int8_t rssi_last;            /* last ack rssi */
+	int8_t rssi_last_lookup;	/* last ack rssi used for lookup */
+	int8_t rssi_last_prev;	/* previous last ack rssi */
+	int8_t rssi_last_prev2;	/* 2nd previous last ack rssi */
+	int32_t rssi_sum_cnt;        /* count of rssi_sum for averaging */
+	int32_t rssi_sum_rate;       /* rate that we are averaging */
+	int32_t rssi_sum;           /* running sum of rssi for averaging */
+	u32 valid_txrate_mask;   /* mask of valid rates */
+	u8 rate_table_size;      /* rate table size */
+	u8 rate_max;            /* max rate that has recently worked */
+	u8 probe_rate;          /* rate we are probing at */
+	u32 rssi_time;          /* msec timestamp for last ack rssi */
+	u32 rssi_down_time;      /* msec timestamp for last down step */
+	u32 probe_time;         /* msec timestamp for last probe */
+	u8 hw_maxretry_pktcnt;   /* num packets since we got
+					HW max retry error */
+	u8 max_valid_rate;       /* maximum number of valid rate */
+	u8 valid_rate_index[MAX_TX_RATE_TBL]; /* valid rate index */
+	u32 per_down_time;       /* msec timstamp for last
+					PER down step */
+
+	/* 11n state */
+	u8  valid_phy_ratecnt[WLAN_RC_PHY_MAX]; /* valid rate count */
+	u8  valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL];
+	u8  rc_phy_mode;
+	u8  rate_max_phy;        /* Phy index for the max rate */
+	u32 rate_max_lastused;   /* msec timstamp of when we
+					last used rateMaxPhy */
+	u32 probe_interval;     /* interval for ratectrl to probe
+					for other rates */
+};
+
+struct ath_rateset {
+	u8 rs_nrates;
+	u8 rs_rates[ATH_RATE_MAX];
+};
+
+/* per-device state */
+struct ath_rate_softc {
+	/* phy tables that contain rate control data */
+	const void *hw_rate_table[ATH9K_MODE_MAX];
+	int fixedrix;	/* -1 or index of fixed rate */
+};
+
+/* per-node state */
+struct ath_rate_node {
+	struct ath_tx_ratectrl tx_ratectrl;	/* rate control state proper */
+	u32 prev_data_rix;	/* rate idx of last data frame */
+
+	/* map of rate ix -> negotiated rate set ix */
+	u8 rixmap[MAX_TX_RATE_TBL];
+
+	/* map of ht rate ix -> negotiated rate set ix */
+	u8 ht_rixmap[MAX_TX_RATE_TBL];
+
+	u8 ht_cap;		/* ht capabilities */
+	u8 ant_tx;		/* current transmit antenna */
+
+	u8 single_stream;   /* When TRUE, only single
+				stream Tx possible */
+	struct ath_rateset neg_rates;	/* Negotiated rates */
+	struct ath_rateset neg_ht_rates;	/* Negotiated HT rates */
+	struct ath_rate_softc *asc; /* back pointer to atheros softc */
+	struct ath_vap *avp;	/* back pointer to vap */
+};
+
+/* Driver data of ieee80211_tx_info */
+struct ath_tx_info_priv {
+	struct ath_rc_series rcs[4];
+	struct ath_tx_status tx;
+	int n_frames;
+	int n_bad_frames;
+	u8 min_rate;
+};
+
+/*
+ * Attach/detach a rate control module.
+ */
+struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah);
+void ath_rate_detach(struct ath_rate_softc *asc);
+
+/*
+ * Update/reset rate control state for 802.11 state transitions.
+ * Important mostly as the analog to ath_rate_newassoc when operating
+ * in station mode.
+ */
+void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv);
+void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp);
+
+/*
+ * Return the tx rate series.
+ */
+void ath_rate_findrate(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv,
+		       int num_tries, int num_rates,
+		       unsigned int rcflag, struct ath_rc_series[],
+		       int *is_probe, int isretry);
+/*
+ * Return rate index for given Dot11 Rate.
+ */
+u8 ath_rate_findrateix(struct ath_softc *sc,
+			     u8 dot11_rate);
+
+/* Routines to register/unregister rate control algorithm */
+int ath_rate_control_register(void);
+void ath_rate_control_unregister(void);
+
+#endif /* RC_H */
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
new file mode 100644
index 00000000000..20ddb7acdb9
--- /dev/null
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -0,0 +1,1319 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Implementation of receive path.
+ */
+
+#include "core.h"
+
+/*
+ * Setup and link descriptors.
+ *
+ * 11N: we can no longer afford to self link the last descriptor.
+ * MAC acknowledges BA status as long as it copies frames to host
+ * buffer (or rx fifo). This can incorrectly acknowledge packets
+ * to a sender if last desc is self-linked.
+ *
+ * NOTE: Caller should hold the rxbuf lock.
+ */
+
+static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_desc *ds;
+	struct sk_buff *skb;
+
+	ATH_RXBUF_RESET(bf);
+
+	ds = bf->bf_desc;
+	ds->ds_link = 0;    /* link to null */
+	ds->ds_data = bf->bf_buf_addr;
+
+	/* XXX For RADAR?
+	 * virtual addr of the beginning of the buffer. */
+	skb = bf->bf_mpdu;
+	ASSERT(skb != NULL);
+	ds->ds_vdata = skb->data;
+
+	/* setup rx descriptors */
+	ath9k_hw_setuprxdesc(ah,
+			     ds,
+			     skb_tailroom(skb),   /* buffer size */
+			     0);
+
+	if (sc->sc_rxlink == NULL)
+		ath9k_hw_putrxbuf(ah, bf->bf_daddr);
+	else
+		*sc->sc_rxlink = bf->bf_daddr;
+
+	sc->sc_rxlink = &ds->ds_link;
+	ath9k_hw_rxena(ah);
+}
+
+/* Process received BAR frame */
+
+static int ath_bar_rx(struct ath_softc *sc,
+		      struct ath_node *an,
+		      struct sk_buff *skb)
+{
+	struct ieee80211_bar *bar;
+	struct ath_arx_tid *rxtid;
+	struct sk_buff *tskb;
+	struct ath_recv_status *rx_status;
+	int tidno, index, cindex;
+	u16 seqno;
+
+	/* look at BAR contents	 */
+
+	bar = (struct ieee80211_bar *)skb->data;
+	tidno = (le16_to_cpu(bar->control) & IEEE80211_BAR_CTL_TID_M)
+		>> IEEE80211_BAR_CTL_TID_S;
+	seqno = le16_to_cpu(bar->start_seq_num) >> IEEE80211_SEQ_SEQ_SHIFT;
+
+	/* process BAR - indicate all pending RX frames till the BAR seqno */
+
+	rxtid = &an->an_aggr.rx.tid[tidno];
+
+	spin_lock_bh(&rxtid->tidlock);
+
+	/* get relative index */
+
+	index = ATH_BA_INDEX(rxtid->seq_next, seqno);
+
+	/* drop BAR if old sequence (index is too large) */
+
+	if ((index > rxtid->baw_size) &&
+	    (index > (IEEE80211_SEQ_MAX - (rxtid->baw_size << 2))))
+		/* discard frame, ieee layer may not treat frame as a dup */
+		goto unlock_and_free;
+
+	/* complete receive processing for all pending frames upto BAR seqno */
+
+	cindex = (rxtid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
+	while ((rxtid->baw_head != rxtid->baw_tail) &&
+	       (rxtid->baw_head != cindex)) {
+		tskb = rxtid->rxbuf[rxtid->baw_head].rx_wbuf;
+		rx_status = &rxtid->rxbuf[rxtid->baw_head].rx_status;
+		rxtid->rxbuf[rxtid->baw_head].rx_wbuf = NULL;
+
+		if (tskb != NULL)
+			ath_rx_subframe(an, tskb, rx_status);
+
+		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+	}
+
+	/* ... and indicate rest of the frames in-order */
+
+	while (rxtid->baw_head != rxtid->baw_tail &&
+	       rxtid->rxbuf[rxtid->baw_head].rx_wbuf != NULL) {
+		tskb = rxtid->rxbuf[rxtid->baw_head].rx_wbuf;
+		rx_status = &rxtid->rxbuf[rxtid->baw_head].rx_status;
+		rxtid->rxbuf[rxtid->baw_head].rx_wbuf = NULL;
+
+		ath_rx_subframe(an, tskb, rx_status);
+
+		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+	}
+
+unlock_and_free:
+	spin_unlock_bh(&rxtid->tidlock);
+	/* free bar itself */
+	dev_kfree_skb(skb);
+	return IEEE80211_FTYPE_CTL;
+}
+
+/* Function to handle a subframe of aggregation when HT is enabled */
+
+static int ath_ampdu_input(struct ath_softc *sc,
+			   struct ath_node *an,
+			   struct sk_buff *skb,
+			   struct ath_recv_status *rx_status)
+{
+	struct ieee80211_hdr *hdr;
+	struct ath_arx_tid *rxtid;
+	struct ath_rxbuf *rxbuf;
+	u8 type, subtype;
+	u16 rxseq;
+	int tid = 0, index, cindex, rxdiff;
+	__le16 fc;
+	u8 *qc;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+	fc = hdr->frame_control;
+
+	/* collect stats of frames with non-zero version */
+
+	if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_VERS) != 0) {
+		dev_kfree_skb(skb);
+		return -1;
+	}
+
+	type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
+	subtype = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_STYPE;
+
+	if (ieee80211_is_back_req(fc))
+		return ath_bar_rx(sc, an, skb);
+
+	/* special aggregate processing only for qos unicast data frames */
+
+	if (!ieee80211_is_data(fc) ||
+	    !ieee80211_is_data_qos(fc) ||
+	    is_multicast_ether_addr(hdr->addr1))
+		return ath_rx_subframe(an, skb, rx_status);
+
+	/* lookup rx tid state */
+
+	if (ieee80211_is_data_qos(fc)) {
+		qc = ieee80211_get_qos_ctl(hdr);
+		tid = qc[0] & 0xf;
+	}
+
+	if (sc->sc_opmode == ATH9K_M_STA) {
+		/* Drop the frame not belonging to me. */
+		if (memcmp(hdr->addr1, sc->sc_myaddr, ETH_ALEN)) {
+			dev_kfree_skb(skb);
+			return -1;
+		}
+	}
+
+	rxtid = &an->an_aggr.rx.tid[tid];
+
+	spin_lock(&rxtid->tidlock);
+
+	rxdiff = (rxtid->baw_tail - rxtid->baw_head) &
+		(ATH_TID_MAX_BUFS - 1);
+
+	/*
+	 * If the ADDBA exchange has not been completed by the source,
+	 * process via legacy path (i.e. no reordering buffer is needed)
+	 */
+	if (!rxtid->addba_exchangecomplete) {
+		spin_unlock(&rxtid->tidlock);
+		return ath_rx_subframe(an, skb, rx_status);
+	}
+
+	/* extract sequence number from recvd frame */
+
+	rxseq = le16_to_cpu(hdr->seq_ctrl) >> IEEE80211_SEQ_SEQ_SHIFT;
+
+	if (rxtid->seq_reset) {
+		rxtid->seq_reset = 0;
+		rxtid->seq_next = rxseq;
+	}
+
+	index = ATH_BA_INDEX(rxtid->seq_next, rxseq);
+
+	/* drop frame if old sequence (index is too large) */
+
+	if (index > (IEEE80211_SEQ_MAX - (rxtid->baw_size << 2))) {
+		/* discard frame, ieee layer may not treat frame as a dup */
+		spin_unlock(&rxtid->tidlock);
+		dev_kfree_skb(skb);
+		return IEEE80211_FTYPE_DATA;
+	}
+
+	/* sequence number is beyond block-ack window */
+
+	if (index >= rxtid->baw_size) {
+
+		/* complete receive processing for all pending frames */
+
+		while (index >= rxtid->baw_size) {
+
+			rxbuf = rxtid->rxbuf + rxtid->baw_head;
+
+			if (rxbuf->rx_wbuf != NULL) {
+				ath_rx_subframe(an, rxbuf->rx_wbuf,
+						&rxbuf->rx_status);
+				rxbuf->rx_wbuf = NULL;
+			}
+
+			INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+			INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+
+			index--;
+		}
+	}
+
+	/* add buffer to the recv ba window */
+
+	cindex = (rxtid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
+	rxbuf = rxtid->rxbuf + cindex;
+
+	if (rxbuf->rx_wbuf != NULL) {
+		spin_unlock(&rxtid->tidlock);
+		/* duplicate frame */
+		dev_kfree_skb(skb);
+		return IEEE80211_FTYPE_DATA;
+	}
+
+	rxbuf->rx_wbuf = skb;
+	rxbuf->rx_time = get_timestamp();
+	rxbuf->rx_status = *rx_status;
+
+	/* advance tail if sequence received is newer
+	 * than any received so far */
+
+	if (index >= rxdiff) {
+		rxtid->baw_tail = cindex;
+		INCR(rxtid->baw_tail, ATH_TID_MAX_BUFS);
+	}
+
+	/* indicate all in-order received frames */
+
+	while (rxtid->baw_head != rxtid->baw_tail) {
+		rxbuf = rxtid->rxbuf + rxtid->baw_head;
+		if (!rxbuf->rx_wbuf)
+			break;
+
+		ath_rx_subframe(an, rxbuf->rx_wbuf, &rxbuf->rx_status);
+		rxbuf->rx_wbuf = NULL;
+
+		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+	}
+
+	/*
+	 * start a timer to flush all received frames if there are pending
+	 * receive frames
+	 */
+	if (rxtid->baw_head != rxtid->baw_tail)
+		mod_timer(&rxtid->timer, ATH_RX_TIMEOUT);
+	else
+		del_timer_sync(&rxtid->timer);
+
+	spin_unlock(&rxtid->tidlock);
+	return IEEE80211_FTYPE_DATA;
+}
+
+/* Timer to flush all received sub-frames */
+
+static void ath_rx_timer(unsigned long data)
+{
+	struct ath_arx_tid *rxtid = (struct ath_arx_tid *)data;
+	struct ath_node *an = rxtid->an;
+	struct ath_rxbuf *rxbuf;
+	int nosched;
+
+	spin_lock_bh(&rxtid->tidlock);
+	while (rxtid->baw_head != rxtid->baw_tail) {
+		rxbuf = rxtid->rxbuf + rxtid->baw_head;
+		if (!rxbuf->rx_wbuf) {
+			INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+			INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+			continue;
+		}
+
+		/*
+		 * Stop if the next one is a very recent frame.
+		 *
+		 * Call get_timestamp in every iteration to protect against the
+		 * case in which a new frame is received while we are executing
+		 * this function. Using a timestamp obtained before entering
+		 * the loop could lead to a very large time interval
+		 * (a negative value typecast to unsigned), breaking the
+		 * function's logic.
+		 */
+		if ((get_timestamp() - rxbuf->rx_time) <
+			(ATH_RX_TIMEOUT * HZ / 1000))
+			break;
+
+		ath_rx_subframe(an, rxbuf->rx_wbuf,
+				&rxbuf->rx_status);
+		rxbuf->rx_wbuf = NULL;
+
+		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+	}
+
+	/*
+	 * start a timer to flush all received frames if there are pending
+	 * receive frames
+	 */
+	if (rxtid->baw_head != rxtid->baw_tail)
+		nosched = 0;
+	else
+		nosched = 1; /* no need to re-arm the timer again */
+
+	spin_unlock_bh(&rxtid->tidlock);
+}
+
+/* Free all pending sub-frames in the re-ordering buffer */
+
+static void ath_rx_flush_tid(struct ath_softc *sc,
+	struct ath_arx_tid *rxtid, int drop)
+{
+	struct ath_rxbuf *rxbuf;
+	unsigned long flag;
+
+	spin_lock_irqsave(&rxtid->tidlock, flag);
+	while (rxtid->baw_head != rxtid->baw_tail) {
+		rxbuf = rxtid->rxbuf + rxtid->baw_head;
+		if (!rxbuf->rx_wbuf) {
+			INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+			INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+			continue;
+		}
+
+		if (drop)
+			dev_kfree_skb(rxbuf->rx_wbuf);
+		else
+			ath_rx_subframe(rxtid->an,
+					rxbuf->rx_wbuf,
+					&rxbuf->rx_status);
+
+		rxbuf->rx_wbuf = NULL;
+
+		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
+		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
+	}
+	spin_unlock_irqrestore(&rxtid->tidlock, flag);
+}
+
+static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc,
+	u32 len)
+{
+	struct sk_buff *skb;
+	u32 off;
+
+	/*
+	 * Cache-line-align.  This is important (for the
+	 * 5210 at least) as not doing so causes bogus data
+	 * in rx'd frames.
+	 */
+
+	skb = dev_alloc_skb(len + sc->sc_cachelsz - 1);
+	if (skb != NULL) {
+		off = ((unsigned long) skb->data) % sc->sc_cachelsz;
+		if (off != 0)
+			skb_reserve(skb, sc->sc_cachelsz - off);
+	} else {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: skbuff alloc of size %u failed\n",
+			__func__, len);
+		return NULL;
+	}
+
+	return skb;
+}
+
+static void ath_rx_requeue(struct ath_softc *sc, struct sk_buff *skb)
+{
+	struct ath_buf *bf = ATH_RX_CONTEXT(skb)->ctx_rxbuf;
+
+	ASSERT(bf != NULL);
+
+	spin_lock_bh(&sc->sc_rxbuflock);
+	if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+		/*
+		 * This buffer is still held for hw acess.
+		 * Mark it as free to be re-queued it later.
+		 */
+		bf->bf_status |= ATH_BUFSTATUS_FREE;
+	} else {
+		/* XXX: we probably never enter here, remove after
+		 * verification */
+		list_add_tail(&bf->list, &sc->sc_rxbuf);
+		ath_rx_buf_link(sc, bf);
+	}
+	spin_unlock_bh(&sc->sc_rxbuflock);
+}
+
+/*
+ * The skb indicated to upper stack won't be returned to us.
+ * So we have to allocate a new one and queue it by ourselves.
+ */
+static int ath_rx_indicate(struct ath_softc *sc,
+			   struct sk_buff *skb,
+			   struct ath_recv_status *status,
+			   u16 keyix)
+{
+	struct ath_buf *bf = ATH_RX_CONTEXT(skb)->ctx_rxbuf;
+	struct sk_buff *nskb;
+	int type;
+
+	/* indicate frame to the stack, which will free the old skb. */
+	type = ath__rx_indicate(sc, skb, status, keyix);
+
+	/* allocate a new skb and queue it to for H/W processing */
+	nskb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize);
+	if (nskb != NULL) {
+		bf->bf_mpdu = nskb;
+		bf->bf_buf_addr = ath_skb_map_single(sc,
+			nskb,
+			PCI_DMA_FROMDEVICE,
+			/* XXX: Remove get_dma_mem_context() */
+			get_dma_mem_context(bf, bf_dmacontext));
+		ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf;
+
+		/* queue the new wbuf to H/W */
+		ath_rx_requeue(sc, nskb);
+	}
+
+	return type;
+}
+
+static void ath_opmode_init(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	u32 rfilt, mfilt[2];
+
+	/* configure rx filter */
+	rfilt = ath_calcrxfilter(sc);
+	ath9k_hw_setrxfilter(ah, rfilt);
+
+	/* configure bssid mask */
+	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
+		ath9k_hw_setbssidmask(ah, sc->sc_bssidmask);
+
+	/* configure operational mode */
+	ath9k_hw_setopmode(ah);
+
+	/* Handle any link-level address change. */
+	ath9k_hw_setmac(ah, sc->sc_myaddr);
+
+	/* calculate and install multicast filter */
+	mfilt[0] = mfilt[1] = ~0;
+
+	ath9k_hw_setmcastfilter(ah, mfilt[0], mfilt[1]);
+	DPRINTF(sc, ATH_DBG_CONFIG ,
+		"%s: RX filter 0x%x, MC filter %08x:%08x\n",
+		__func__, rfilt, mfilt[0], mfilt[1]);
+}
+
+int ath_rx_init(struct ath_softc *sc, int nbufs)
+{
+	struct sk_buff *skb;
+	struct ath_buf *bf;
+	int error = 0;
+
+	do {
+		spin_lock_init(&sc->sc_rxflushlock);
+		sc->sc_rxflush = 0;
+		spin_lock_init(&sc->sc_rxbuflock);
+
+		/*
+		 * Cisco's VPN software requires that drivers be able to
+		 * receive encapsulated frames that are larger than the MTU.
+		 * Since we can't be sure how large a frame we'll get, setup
+		 * to handle the larges on possible.
+		 */
+		sc->sc_rxbufsize = roundup(IEEE80211_MAX_MPDU_LEN,
+					   min(sc->sc_cachelsz,
+					       (u16)64));
+
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: cachelsz %u rxbufsize %u\n",
+			__func__, sc->sc_cachelsz, sc->sc_rxbufsize);
+
+		/* Initialize rx descriptors */
+
+		error = ath_descdma_setup(sc, &sc->sc_rxdma, &sc->sc_rxbuf,
+					  "rx", nbufs, 1);
+		if (error != 0) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: failed to allocate rx descriptors: %d\n",
+				__func__, error);
+			break;
+		}
+
+		/* Pre-allocate a wbuf for each rx buffer */
+
+		list_for_each_entry(bf, &sc->sc_rxbuf, list) {
+			skb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize);
+			if (skb == NULL) {
+				error = -ENOMEM;
+				break;
+			}
+
+			bf->bf_mpdu = skb;
+			bf->bf_buf_addr =
+				ath_skb_map_single(sc, skb, PCI_DMA_FROMDEVICE,
+				       get_dma_mem_context(bf, bf_dmacontext));
+			ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf;
+		}
+		sc->sc_rxlink = NULL;
+
+	} while (0);
+
+	if (error)
+		ath_rx_cleanup(sc);
+
+	return error;
+}
+
+/* Reclaim all rx queue resources */
+
+void ath_rx_cleanup(struct ath_softc *sc)
+{
+	struct sk_buff *skb;
+	struct ath_buf *bf;
+
+	list_for_each_entry(bf, &sc->sc_rxbuf, list) {
+		skb = bf->bf_mpdu;
+		if (skb)
+			dev_kfree_skb(skb);
+	}
+
+	/* cleanup rx descriptors */
+
+	if (sc->sc_rxdma.dd_desc_len != 0)
+		ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf);
+}
+
+/*
+ * Calculate the receive filter according to the
+ * operating mode and state:
+ *
+ * o always accept unicast, broadcast, and multicast traffic
+ * o maintain current state of phy error reception (the hal
+ *   may enable phy error frames for noise immunity work)
+ * o probe request frames are accepted only when operating in
+ *   hostap, adhoc, or monitor modes
+ * o enable promiscuous mode according to the interface state
+ * o accept beacons:
+ *   - when operating in adhoc mode so the 802.11 layer creates
+ *     node table entries for peers,
+ *   - when operating in station mode for collecting rssi data when
+ *     the station is otherwise quiet, or
+ *   - when operating as a repeater so we see repeater-sta beacons
+ *   - when scanning
+ */
+
+u32 ath_calcrxfilter(struct ath_softc *sc)
+{
+#define	RX_FILTER_PRESERVE (ATH9K_RX_FILTER_PHYERR | ATH9K_RX_FILTER_PHYRADAR)
+	u32 rfilt;
+
+	rfilt = (ath9k_hw_getrxfilter(sc->sc_ah) & RX_FILTER_PRESERVE)
+		| ATH9K_RX_FILTER_UCAST | ATH9K_RX_FILTER_BCAST
+		| ATH9K_RX_FILTER_MCAST;
+
+	/* If not a STA, enable processing of Probe Requests */
+	if (sc->sc_opmode != ATH9K_M_STA)
+		rfilt |= ATH9K_RX_FILTER_PROBEREQ;
+
+	/* Can't set HOSTAP into promiscous mode */
+	if (sc->sc_opmode == ATH9K_M_MONITOR) {
+		rfilt |= ATH9K_RX_FILTER_PROM;
+		/* ??? To prevent from sending ACK */
+		rfilt &= ~ATH9K_RX_FILTER_UCAST;
+	}
+
+	if (sc->sc_opmode == ATH9K_M_STA || sc->sc_opmode == ATH9K_M_IBSS ||
+	    sc->sc_scanning)
+		rfilt |= ATH9K_RX_FILTER_BEACON;
+
+	/* If in HOSTAP mode, want to enable reception of PSPOLL frames
+	   & beacon frames */
+	if (sc->sc_opmode == ATH9K_M_HOSTAP)
+		rfilt |= (ATH9K_RX_FILTER_BEACON | ATH9K_RX_FILTER_PSPOLL);
+	return rfilt;
+#undef RX_FILTER_PRESERVE
+}
+
+/* Enable the receive h/w following a reset. */
+
+int ath_startrecv(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf, *tbf;
+
+	spin_lock_bh(&sc->sc_rxbuflock);
+	if (list_empty(&sc->sc_rxbuf))
+		goto start_recv;
+
+	sc->sc_rxlink = NULL;
+	list_for_each_entry_safe(bf, tbf, &sc->sc_rxbuf, list) {
+		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+			/* restarting h/w, no need for holding descriptors */
+			bf->bf_status &= ~ATH_BUFSTATUS_STALE;
+			/*
+			 * Upper layer may not be done with the frame yet so
+			 * we can't just re-queue it to hardware. Remove it
+			 * from h/w queue. It'll be re-queued when upper layer
+			 * returns the frame and ath_rx_requeue_mpdu is called.
+			 */
+			if (!(bf->bf_status & ATH_BUFSTATUS_FREE)) {
+				list_del(&bf->list);
+				continue;
+			}
+		}
+		/* chain descriptors */
+		ath_rx_buf_link(sc, bf);
+	}
+
+	/* We could have deleted elements so the list may be empty now */
+	if (list_empty(&sc->sc_rxbuf))
+		goto start_recv;
+
+	bf = list_first_entry(&sc->sc_rxbuf, struct ath_buf, list);
+	ath9k_hw_putrxbuf(ah, bf->bf_daddr);
+	ath9k_hw_rxena(ah);      /* enable recv descriptors */
+
+start_recv:
+	spin_unlock_bh(&sc->sc_rxbuflock);
+	ath_opmode_init(sc);        /* set filters, etc. */
+	ath9k_hw_startpcureceive(ah);	/* re-enable PCU/DMA engine */
+	return 0;
+}
+
+/* Disable the receive h/w in preparation for a reset. */
+
+bool ath_stoprecv(struct ath_softc *sc)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	u64 tsf;
+	bool stopped;
+
+	ath9k_hw_stoppcurecv(ah);	/* disable PCU */
+	ath9k_hw_setrxfilter(ah, 0);	/* clear recv filter */
+	stopped = ath9k_hw_stopdmarecv(ah);	/* disable DMA engine */
+	mdelay(3);			/* 3ms is long enough for 1 frame */
+	tsf = ath9k_hw_gettsf64(ah);
+	sc->sc_rxlink = NULL;		/* just in case */
+	return stopped;
+}
+
+/* Flush receive queue */
+
+void ath_flushrecv(struct ath_softc *sc)
+{
+	/*
+	 * ath_rx_tasklet may be used to handle rx interrupt and flush receive
+	 * queue at the same time. Use a lock to serialize the access of rx
+	 * queue.
+	 * ath_rx_tasklet cannot hold the spinlock while indicating packets.
+	 * Instead, do not claim the spinlock but check for a flush in
+	 * progress (see references to sc_rxflush)
+	 */
+	spin_lock_bh(&sc->sc_rxflushlock);
+	sc->sc_rxflush = 1;
+
+	ath_rx_tasklet(sc, 1);
+
+	sc->sc_rxflush = 0;
+	spin_unlock_bh(&sc->sc_rxflushlock);
+}
+
+/* Process an individual frame */
+
+int ath_rx_input(struct ath_softc *sc,
+		 struct ath_node *an,
+		 int is_ampdu,
+		 struct sk_buff *skb,
+		 struct ath_recv_status *rx_status,
+		 enum ATH_RX_TYPE *status)
+{
+	if (is_ampdu && sc->sc_rxaggr) {
+		*status = ATH_RX_CONSUMED;
+		return ath_ampdu_input(sc, an, skb, rx_status);
+	} else {
+		*status = ATH_RX_NON_CONSUMED;
+		return -1;
+	}
+}
+
+/* Process receive queue, as well as LED, etc. */
+
+int ath_rx_tasklet(struct ath_softc *sc, int flush)
+{
+#define PA2DESC(_sc, _pa)                                               \
+	((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc +		\
+			     ((_pa) - (_sc)->sc_rxdma.dd_desc_paddr)))
+
+	struct ath_buf *bf, *bf_held = NULL;
+	struct ath_desc *ds;
+	struct ieee80211_hdr *hdr;
+	struct sk_buff *skb = NULL;
+	struct ath_recv_status rx_status;
+	struct ath_hal *ah = sc->sc_ah;
+	int type, rx_processed = 0;
+	u32 phyerr;
+	u8 chainreset = 0;
+	int retval;
+	__le16 fc;
+
+	do {
+		/* If handling rx interrupt and flush is in progress => exit */
+		if (sc->sc_rxflush && (flush == 0))
+			break;
+
+		spin_lock_bh(&sc->sc_rxbuflock);
+		if (list_empty(&sc->sc_rxbuf)) {
+			sc->sc_rxlink = NULL;
+			spin_unlock_bh(&sc->sc_rxbuflock);
+			break;
+		}
+
+		bf = list_first_entry(&sc->sc_rxbuf, struct ath_buf, list);
+
+		/*
+		 * There is a race condition that BH gets scheduled after sw
+		 * writes RxE and before hw re-load the last descriptor to get
+		 * the newly chained one. Software must keep the last DONE
+		 * descriptor as a holding descriptor - software does so by
+		 * marking it with the STALE flag.
+		 */
+		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+			bf_held = bf;
+			if (list_is_last(&bf_held->list, &sc->sc_rxbuf)) {
+				/*
+				 * The holding descriptor is the last
+				 * descriptor in queue. It's safe to
+				 * remove the last holding descriptor
+				 * in BH context.
+				 */
+				list_del(&bf_held->list);
+				bf_held->bf_status &= ~ATH_BUFSTATUS_STALE;
+				sc->sc_rxlink = NULL;
+
+				if (bf_held->bf_status & ATH_BUFSTATUS_FREE) {
+					list_add_tail(&bf_held->list,
+						&sc->sc_rxbuf);
+					ath_rx_buf_link(sc, bf_held);
+				}
+				spin_unlock_bh(&sc->sc_rxbuflock);
+				break;
+			}
+			bf = list_entry(bf->list.next, struct ath_buf, list);
+		}
+
+		ds = bf->bf_desc;
+		++rx_processed;
+
+		/*
+		 * Must provide the virtual address of the current
+		 * descriptor, the physical address, and the virtual
+		 * address of the next descriptor in the h/w chain.
+		 * This allows the HAL to look ahead to see if the
+		 * hardware is done with a descriptor by checking the
+		 * done bit in the following descriptor and the address
+		 * of the current descriptor the DMA engine is working
+		 * on.  All this is necessary because of our use of
+		 * a self-linked list to avoid rx overruns.
+		 */
+		retval = ath9k_hw_rxprocdesc(ah,
+					     ds,
+					     bf->bf_daddr,
+					     PA2DESC(sc, ds->ds_link),
+					     0);
+		if (retval == -EINPROGRESS) {
+			struct ath_buf *tbf;
+			struct ath_desc *tds;
+
+			if (list_is_last(&bf->list, &sc->sc_rxbuf)) {
+				spin_unlock_bh(&sc->sc_rxbuflock);
+				break;
+			}
+
+			tbf = list_entry(bf->list.next, struct ath_buf, list);
+
+			/*
+			 * On some hardware the descriptor status words could
+			 * get corrupted, including the done bit. Because of
+			 * this, check if the next descriptor's done bit is
+			 * set or not.
+			 *
+			 * If the next descriptor's done bit is set, the current
+			 * descriptor has been corrupted. Force s/w to discard
+			 * this descriptor and continue...
+			 */
+
+			tds = tbf->bf_desc;
+			retval = ath9k_hw_rxprocdesc(ah,
+				tds, tbf->bf_daddr,
+				PA2DESC(sc, tds->ds_link), 0);
+			if (retval == -EINPROGRESS) {
+				spin_unlock_bh(&sc->sc_rxbuflock);
+				break;
+			}
+		}
+
+		/* XXX: we do not support frames spanning
+		 * multiple descriptors */
+		bf->bf_status |= ATH_BUFSTATUS_DONE;
+
+		skb = bf->bf_mpdu;
+		if (skb == NULL) {		/* XXX ??? can this happen */
+			spin_unlock_bh(&sc->sc_rxbuflock);
+			continue;
+		}
+		/*
+		 * Now we know it's a completed frame, we can indicate the
+		 * frame. Remove the previous holding descriptor and leave
+		 * this one in the queue as the new holding descriptor.
+		 */
+		if (bf_held) {
+			list_del(&bf_held->list);
+			bf_held->bf_status &= ~ATH_BUFSTATUS_STALE;
+			if (bf_held->bf_status & ATH_BUFSTATUS_FREE) {
+				list_add_tail(&bf_held->list, &sc->sc_rxbuf);
+				/* try to requeue this descriptor */
+				ath_rx_buf_link(sc, bf_held);
+			}
+		}
+
+		bf->bf_status |= ATH_BUFSTATUS_STALE;
+		bf_held = bf;
+		/*
+		 * Release the lock here in case ieee80211_input() return
+		 * the frame immediately by calling ath_rx_mpdu_requeue().
+		 */
+		spin_unlock_bh(&sc->sc_rxbuflock);
+
+		if (flush) {
+			/*
+			 * If we're asked to flush receive queue, directly
+			 * chain it back at the queue without processing it.
+			 */
+			goto rx_next;
+		}
+
+		hdr = (struct ieee80211_hdr *)skb->data;
+		fc = hdr->frame_control;
+		memzero(&rx_status, sizeof(struct ath_recv_status));
+
+		if (ds->ds_rxstat.rs_more) {
+			/*
+			 * Frame spans multiple descriptors; this
+			 * cannot happen yet as we don't support
+			 * jumbograms.  If not in monitor mode,
+			 * discard the frame.
+			 */
+#ifndef ERROR_FRAMES
+			/*
+			 * Enable this if you want to see
+			 * error frames in Monitor mode.
+			 */
+			if (sc->sc_opmode != ATH9K_M_MONITOR)
+				goto rx_next;
+#endif
+			/* fall thru for monitor mode handling... */
+		} else if (ds->ds_rxstat.rs_status != 0) {
+			if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC)
+				rx_status.flags |= ATH_RX_FCS_ERROR;
+			if (ds->ds_rxstat.rs_status & ATH9K_RXERR_PHY) {
+				phyerr = ds->ds_rxstat.rs_phyerr & 0x1f;
+				goto rx_next;
+			}
+
+			if (ds->ds_rxstat.rs_status & ATH9K_RXERR_DECRYPT) {
+				/*
+				 * Decrypt error. We only mark packet status
+				 * here and always push up the frame up to let
+				 * mac80211 handle the actual error case, be
+				 * it no decryption key or real decryption
+				 * error. This let us keep statistics there.
+				 */
+				rx_status.flags |= ATH_RX_DECRYPT_ERROR;
+			} else if (ds->ds_rxstat.rs_status & ATH9K_RXERR_MIC) {
+				/*
+				 * Demic error. We only mark frame status here
+				 * and always push up the frame up to let
+				 * mac80211 handle the actual error case. This
+				 * let us keep statistics there. Hardware may
+				 * post a false-positive MIC error.
+				 */
+				if (ieee80211_is_ctl(fc))
+					/*
+					 * Sometimes, we get invalid
+					 * MIC failures on valid control frames.
+					 * Remove these mic errors.
+					 */
+					ds->ds_rxstat.rs_status &=
+						~ATH9K_RXERR_MIC;
+				else
+					rx_status.flags |= ATH_RX_MIC_ERROR;
+			}
+			/*
+			 * Reject error frames with the exception of
+			 * decryption and MIC failures. For monitor mode,
+			 * we also ignore the CRC error.
+			 */
+			if (sc->sc_opmode == ATH9K_M_MONITOR) {
+				if (ds->ds_rxstat.rs_status &
+				    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
+					ATH9K_RXERR_CRC))
+					goto rx_next;
+			} else {
+				if (ds->ds_rxstat.rs_status &
+				    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
+					goto rx_next;
+				}
+			}
+		}
+		/*
+		 * The status portion of the descriptor could get corrupted.
+		 */
+		if (sc->sc_rxbufsize < ds->ds_rxstat.rs_datalen)
+			goto rx_next;
+		/*
+		 * Sync and unmap the frame.  At this point we're
+		 * committed to passing the sk_buff somewhere so
+		 * clear buf_skb; this means a new sk_buff must be
+		 * allocated when the rx descriptor is setup again
+		 * to receive another frame.
+		 */
+		skb_put(skb, ds->ds_rxstat.rs_datalen);
+		skb->protocol = cpu_to_be16(ETH_P_CONTROL);
+		rx_status.tsf = ath_extend_tsf(sc, ds->ds_rxstat.rs_tstamp);
+		rx_status.rateieee =
+			sc->sc_hwmap[ds->ds_rxstat.rs_rate].ieeerate;
+		rx_status.rateKbps =
+			sc->sc_hwmap[ds->ds_rxstat.rs_rate].rateKbps;
+		rx_status.ratecode = ds->ds_rxstat.rs_rate;
+
+		/* HT rate */
+		if (rx_status.ratecode & 0x80) {
+			/* TODO - add table to avoid division */
+			if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040) {
+				rx_status.flags |= ATH_RX_40MHZ;
+				rx_status.rateKbps =
+					(rx_status.rateKbps * 27) / 13;
+			}
+			if (ds->ds_rxstat.rs_flags & ATH9K_RX_GI)
+				rx_status.rateKbps =
+					(rx_status.rateKbps * 10) / 9;
+			else
+				rx_status.flags |= ATH_RX_SHORT_GI;
+		}
+
+		/* sc->sc_noise_floor is only available when the station
+		   attaches to an AP, so we use a default value
+		   if we are not yet attached. */
+
+		/* XXX we should use either sc->sc_noise_floor or
+		 * ath_hal_getChanNoise(ah, &sc->sc_curchan)
+		 * to calculate the noise floor.
+		 * However, the value returned by ath_hal_getChanNoise
+		 * seems to be incorrect (-31dBm on the last test),
+		 * so we will use a hard-coded value until we
+		 * figure out what is going on.
+		 */
+		rx_status.abs_rssi =
+			ds->ds_rxstat.rs_rssi + ATH_DEFAULT_NOISE_FLOOR;
+
+		pci_dma_sync_single_for_cpu(sc->pdev,
+					    bf->bf_buf_addr,
+					    skb_tailroom(skb),
+					    PCI_DMA_FROMDEVICE);
+		pci_unmap_single(sc->pdev,
+				 bf->bf_buf_addr,
+				 sc->sc_rxbufsize,
+				 PCI_DMA_FROMDEVICE);
+
+		/* XXX: Ah! make me more readable, use a helper */
+		if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
+			if (ds->ds_rxstat.rs_moreaggr == 0) {
+				rx_status.rssictl[0] =
+					ds->ds_rxstat.rs_rssi_ctl0;
+				rx_status.rssictl[1] =
+					ds->ds_rxstat.rs_rssi_ctl1;
+				rx_status.rssictl[2] =
+					ds->ds_rxstat.rs_rssi_ctl2;
+				rx_status.rssi = ds->ds_rxstat.rs_rssi;
+				if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040) {
+					rx_status.rssiextn[0] =
+						ds->ds_rxstat.rs_rssi_ext0;
+					rx_status.rssiextn[1] =
+						ds->ds_rxstat.rs_rssi_ext1;
+					rx_status.rssiextn[2] =
+						ds->ds_rxstat.rs_rssi_ext2;
+					rx_status.flags |=
+						ATH_RX_RSSI_EXTN_VALID;
+				}
+				rx_status.flags |= ATH_RX_RSSI_VALID |
+					ATH_RX_CHAIN_RSSI_VALID;
+			}
+		} else {
+			/*
+			 * Need to insert the "combined" rssi into the
+			 * status structure for upper layer processing
+			 */
+			rx_status.rssi = ds->ds_rxstat.rs_rssi;
+			rx_status.flags |= ATH_RX_RSSI_VALID;
+		}
+
+		/* Pass frames up to the stack. */
+
+		type = ath_rx_indicate(sc, skb,
+			&rx_status, ds->ds_rxstat.rs_keyix);
+
+		/*
+		 * change the default rx antenna if rx diversity chooses the
+		 * other antenna 3 times in a row.
+		 */
+		if (sc->sc_defant != ds->ds_rxstat.rs_antenna) {
+			if (++sc->sc_rxotherant >= 3)
+				ath_setdefantenna(sc,
+						ds->ds_rxstat.rs_antenna);
+		} else {
+			sc->sc_rxotherant = 0;
+		}
+
+#ifdef CONFIG_SLOW_ANT_DIV
+		if ((rx_status.flags & ATH_RX_RSSI_VALID) &&
+		    ieee80211_is_beacon(fc)) {
+			ath_slow_ant_div(&sc->sc_antdiv, hdr, &ds->ds_rxstat);
+		}
+#endif
+		/*
+		 * For frames successfully indicated, the buffer will be
+		 * returned to us by upper layers by calling
+		 * ath_rx_mpdu_requeue, either synchronusly or asynchronously.
+		 * So we don't want to do it here in this loop.
+		 */
+		continue;
+
+rx_next:
+		bf->bf_status |= ATH_BUFSTATUS_FREE;
+	} while (TRUE);
+
+	if (chainreset) {
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"%s: Reset rx chain mask. "
+			"Do internal reset\n", __func__);
+		ASSERT(flush == 0);
+		ath_internal_reset(sc);
+	}
+
+	return 0;
+#undef PA2DESC
+}
+
+/* Process ADDBA request in per-TID data structure */
+
+int ath_rx_aggr_start(struct ath_softc *sc,
+		      const u8 *addr,
+		      u16 tid,
+		      u16 *ssn)
+{
+	struct ath_arx_tid *rxtid;
+	struct ath_node *an;
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_supported_band *sband;
+	u16 buffersize = 0;
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, (u8 *) addr);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (!an) {
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: Node not found to initialize RX aggregation\n",
+			__func__);
+		return -1;
+	}
+
+	sband = hw->wiphy->bands[hw->conf.channel->band];
+	buffersize = IEEE80211_MIN_AMPDU_BUF <<
+		sband->ht_info.ampdu_factor; /* FIXME */
+
+	rxtid = &an->an_aggr.rx.tid[tid];
+
+	spin_lock_bh(&rxtid->tidlock);
+	if (sc->sc_rxaggr) {
+		/* Allow aggregation reception
+		 * Adjust rx BA window size. Peer might indicate a
+		 * zero buffer size for a _dont_care_ condition.
+		 */
+		if (buffersize)
+			rxtid->baw_size = min(buffersize, rxtid->baw_size);
+
+		/* set rx sequence number */
+		rxtid->seq_next = *ssn;
+
+		/* Allocate the receive buffers for this TID */
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: Allcating rxbuffer for TID %d\n", __func__, tid);
+
+		if (rxtid->rxbuf == NULL) {
+			/*
+			* If the rxbuff is not NULL at this point, we *probably*
+			* already allocated the buffer on a previous ADDBA,
+			* and this is a subsequent ADDBA that got through.
+			* Don't allocate, but use the value in the pointer,
+			* we zero it out when we de-allocate.
+			*/
+			rxtid->rxbuf = kmalloc(ATH_TID_MAX_BUFS *
+				sizeof(struct ath_rxbuf), GFP_ATOMIC);
+		}
+		if (rxtid->rxbuf == NULL) {
+			DPRINTF(sc, ATH_DBG_AGGR,
+				"%s: Unable to allocate RX buffer, "
+				"refusing ADDBA\n", __func__);
+		} else {
+			/* Ensure the memory is zeroed out (all internal
+			 * pointers are null) */
+			memzero(rxtid->rxbuf, ATH_TID_MAX_BUFS *
+				sizeof(struct ath_rxbuf));
+			DPRINTF(sc, ATH_DBG_AGGR,
+				"%s: Allocated @%p\n", __func__, rxtid->rxbuf);
+
+			/* Allow aggregation reception */
+			rxtid->addba_exchangecomplete = 1;
+		}
+	}
+	spin_unlock_bh(&rxtid->tidlock);
+
+	return 0;
+}
+
+/* Process DELBA */
+
+int ath_rx_aggr_stop(struct ath_softc *sc,
+		     const u8 *addr,
+		     u16 tid)
+{
+	struct ath_node *an;
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, (u8 *) addr);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (!an) {
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: RX aggr stop for non-existent node\n", __func__);
+		return -1;
+	}
+
+	ath_rx_aggr_teardown(sc, an, tid);
+	return 0;
+}
+
+/* Rx aggregation tear down */
+
+void ath_rx_aggr_teardown(struct ath_softc *sc,
+	struct ath_node *an, u8 tid)
+{
+	struct ath_arx_tid *rxtid = &an->an_aggr.rx.tid[tid];
+
+	if (!rxtid->addba_exchangecomplete)
+		return;
+
+	del_timer_sync(&rxtid->timer);
+	ath_rx_flush_tid(sc, rxtid, 0);
+	rxtid->addba_exchangecomplete = 0;
+
+	/* De-allocate the receive buffer array allocated when addba started */
+
+	if (rxtid->rxbuf) {
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: Deallocating TID %d rxbuff @%p\n",
+			__func__, tid, rxtid->rxbuf);
+		kfree(rxtid->rxbuf);
+
+		/* Set pointer to null to avoid reuse*/
+		rxtid->rxbuf = NULL;
+	}
+}
+
+/* Initialize per-node receive state */
+
+void ath_rx_node_init(struct ath_softc *sc, struct ath_node *an)
+{
+	if (sc->sc_rxaggr) {
+		struct ath_arx_tid *rxtid;
+		int tidno;
+
+		/* Init per tid rx state */
+		for (tidno = 0, rxtid = &an->an_aggr.rx.tid[tidno];
+				tidno < WME_NUM_TID;
+				tidno++, rxtid++) {
+			rxtid->an        = an;
+			rxtid->seq_reset = 1;
+			rxtid->seq_next  = 0;
+			rxtid->baw_size  = WME_MAX_BA;
+			rxtid->baw_head  = rxtid->baw_tail = 0;
+
+			/*
+			 * Ensure the buffer pointer is null at this point
+			 * (needs to be allocated when addba is received)
+			*/
+
+			rxtid->rxbuf     = NULL;
+			setup_timer(&rxtid->timer, ath_rx_timer,
+				(unsigned long)rxtid);
+			spin_lock_init(&rxtid->tidlock);
+
+			/* ADDBA state */
+			rxtid->addba_exchangecomplete = 0;
+		}
+	}
+}
+
+void ath_rx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
+{
+	if (sc->sc_rxaggr) {
+		struct ath_arx_tid *rxtid;
+		int tidno, i;
+
+		/* Init per tid rx state */
+		for (tidno = 0, rxtid = &an->an_aggr.rx.tid[tidno];
+				tidno < WME_NUM_TID;
+				tidno++, rxtid++) {
+
+			if (!rxtid->addba_exchangecomplete)
+				continue;
+
+			/* must cancel timer first */
+			del_timer_sync(&rxtid->timer);
+
+			/* drop any pending sub-frames */
+			ath_rx_flush_tid(sc, rxtid, 1);
+
+			for (i = 0; i < ATH_TID_MAX_BUFS; i++)
+				ASSERT(rxtid->rxbuf[i].rx_wbuf == NULL);
+
+			rxtid->addba_exchangecomplete = 0;
+		}
+	}
+
+}
+
+/* Cleanup per-node receive state */
+
+void ath_rx_node_free(struct ath_softc *sc, struct ath_node *an)
+{
+	ath_rx_node_cleanup(sc, an);
+}
+
+dma_addr_t ath_skb_map_single(struct ath_softc *sc,
+			      struct sk_buff *skb,
+			      int direction,
+			      dma_addr_t *pa)
+{
+	/*
+	 * NB: do NOT use skb->len, which is 0 on initialization.
+	 * Use skb's entire data area instead.
+	 */
+	*pa = pci_map_single(sc->pdev, skb->data,
+		skb_end_pointer(skb) - skb->head, direction);
+	return *pa;
+}
+
+void ath_skb_unmap_single(struct ath_softc *sc,
+			  struct sk_buff *skb,
+			  int direction,
+			  dma_addr_t *pa)
+{
+	/* Unmap skb's entire data area */
+	pci_unmap_single(sc->pdev, *pa,
+		skb_end_pointer(skb) - skb->head, direction);
+}
diff --git a/drivers/net/wireless/ath9k/reg.h b/drivers/net/wireless/ath9k/reg.h
new file mode 100644
index 00000000000..42b0890a468
--- /dev/null
+++ b/drivers/net/wireless/ath9k/reg.h
@@ -0,0 +1,1385 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef REG_H
+#define REG_H
+
+#define AR_CR                0x0008
+#define AR_CR_RXE            0x00000004
+#define AR_CR_RXD            0x00000020
+#define AR_CR_SWI            0x00000040
+
+#define AR_RXDP              0x000C
+
+#define AR_CFG               0x0014
+#define AR_CFG_SWTD          0x00000001
+#define AR_CFG_SWTB          0x00000002
+#define AR_CFG_SWRD          0x00000004
+#define AR_CFG_SWRB          0x00000008
+#define AR_CFG_SWRG          0x00000010
+#define AR_CFG_AP_ADHOC_INDICATION 0x00000020
+#define AR_CFG_PHOK          0x00000100
+#define AR_CFG_CLK_GATE_DIS  0x00000400
+#define AR_CFG_EEBS          0x00000200
+#define AR_CFG_PCI_MASTER_REQ_Q_THRESH         0x00060000
+#define AR_CFG_PCI_MASTER_REQ_Q_THRESH_S       17
+
+#define AR_MIRT              0x0020
+#define AR_MIRT_VAL          0x0000ffff
+#define AR_MIRT_VAL_S        16
+
+#define AR_IER               0x0024
+#define AR_IER_ENABLE        0x00000001
+#define AR_IER_DISABLE       0x00000000
+
+#define AR_TIMT              0x0028
+#define AR_TIMT_LAST         0x0000ffff
+#define AR_TIMT_LAST_S       0
+#define AR_TIMT_FIRST        0xffff0000
+#define AR_TIMT_FIRST_S      16
+
+#define AR_RIMT              0x002C
+#define AR_RIMT_LAST         0x0000ffff
+#define AR_RIMT_LAST_S       0
+#define AR_RIMT_FIRST        0xffff0000
+#define AR_RIMT_FIRST_S      16
+
+#define AR_DMASIZE_4B        0x00000000
+#define AR_DMASIZE_8B        0x00000001
+#define AR_DMASIZE_16B       0x00000002
+#define AR_DMASIZE_32B       0x00000003
+#define AR_DMASIZE_64B       0x00000004
+#define AR_DMASIZE_128B      0x00000005
+#define AR_DMASIZE_256B      0x00000006
+#define AR_DMASIZE_512B      0x00000007
+
+#define AR_TXCFG             0x0030
+#define AR_TXCFG_DMASZ_MASK  0x00000003
+#define AR_TXCFG_DMASZ_4B    0
+#define AR_TXCFG_DMASZ_8B    1
+#define AR_TXCFG_DMASZ_16B   2
+#define AR_TXCFG_DMASZ_32B   3
+#define AR_TXCFG_DMASZ_64B   4
+#define AR_TXCFG_DMASZ_128B  5
+#define AR_TXCFG_DMASZ_256B  6
+#define AR_TXCFG_DMASZ_512B  7
+#define AR_FTRIG             0x000003F0
+#define AR_FTRIG_S           4
+#define AR_FTRIG_IMMED       0x00000000
+#define AR_FTRIG_64B         0x00000010
+#define AR_FTRIG_128B        0x00000020
+#define AR_FTRIG_192B        0x00000030
+#define AR_FTRIG_256B        0x00000040
+#define AR_FTRIG_512B        0x00000080
+#define AR_TXCFG_ADHOC_BEACON_ATIM_TX_POLICY 0x00000800
+
+#define AR_RXCFG             0x0034
+#define AR_RXCFG_CHIRP       0x00000008
+#define AR_RXCFG_ZLFDMA      0x00000010
+#define AR_RXCFG_DMASZ_MASK  0x00000007
+#define AR_RXCFG_DMASZ_4B    0
+#define AR_RXCFG_DMASZ_8B    1
+#define AR_RXCFG_DMASZ_16B   2
+#define AR_RXCFG_DMASZ_32B   3
+#define AR_RXCFG_DMASZ_64B   4
+#define AR_RXCFG_DMASZ_128B  5
+#define AR_RXCFG_DMASZ_256B  6
+#define AR_RXCFG_DMASZ_512B  7
+
+#define AR_MIBC              0x0040
+#define AR_MIBC_COW          0x00000001
+#define AR_MIBC_FMC          0x00000002
+#define AR_MIBC_CMC          0x00000004
+#define AR_MIBC_MCS          0x00000008
+
+#define AR_TOPS              0x0044
+#define AR_TOPS_MASK         0x0000FFFF
+
+#define AR_RXNPTO            0x0048
+#define AR_RXNPTO_MASK       0x000003FF
+
+#define AR_TXNPTO            0x004C
+#define AR_TXNPTO_MASK       0x000003FF
+#define AR_TXNPTO_QCU_MASK   0x000FFC00
+
+#define AR_RPGTO             0x0050
+#define AR_RPGTO_MASK        0x000003FF
+
+#define AR_RPCNT             0x0054
+#define AR_RPCNT_MASK        0x0000001F
+
+#define AR_MACMISC           0x0058
+#define AR_MACMISC_PCI_EXT_FORCE        0x00000010
+#define AR_MACMISC_DMA_OBS              0x000001E0
+#define AR_MACMISC_DMA_OBS_S            5
+#define AR_MACMISC_DMA_OBS_LINE_0       0
+#define AR_MACMISC_DMA_OBS_LINE_1       1
+#define AR_MACMISC_DMA_OBS_LINE_2       2
+#define AR_MACMISC_DMA_OBS_LINE_3       3
+#define AR_MACMISC_DMA_OBS_LINE_4       4
+#define AR_MACMISC_DMA_OBS_LINE_5       5
+#define AR_MACMISC_DMA_OBS_LINE_6       6
+#define AR_MACMISC_DMA_OBS_LINE_7       7
+#define AR_MACMISC_DMA_OBS_LINE_8       8
+#define AR_MACMISC_MISC_OBS             0x00000E00
+#define AR_MACMISC_MISC_OBS_S           9
+#define AR_MACMISC_MISC_OBS_BUS_LSB     0x00007000
+#define AR_MACMISC_MISC_OBS_BUS_LSB_S   12
+#define AR_MACMISC_MISC_OBS_BUS_MSB     0x00038000
+#define AR_MACMISC_MISC_OBS_BUS_MSB_S   15
+#define AR_MACMISC_MISC_OBS_BUS_1       1
+
+#define AR_GTXTO    0x0064
+#define AR_GTXTO_TIMEOUT_COUNTER    0x0000FFFF
+#define AR_GTXTO_TIMEOUT_LIMIT      0xFFFF0000
+#define AR_GTXTO_TIMEOUT_LIMIT_S    16
+
+#define AR_GTTM     0x0068
+#define AR_GTTM_USEC          0x00000001
+#define AR_GTTM_IGNORE_IDLE   0x00000002
+#define AR_GTTM_RESET_IDLE    0x00000004
+#define AR_GTTM_CST_USEC      0x00000008
+
+#define AR_CST         0x006C
+#define AR_CST_TIMEOUT_COUNTER    0x0000FFFF
+#define AR_CST_TIMEOUT_LIMIT      0xFFFF0000
+#define AR_CST_TIMEOUT_LIMIT_S    16
+
+#define AR_SREV_VERSION_9100                  0x014
+
+#define AR_SREV_5416_V20_OR_LATER(_ah) \
+	(AR_SREV_9100((_ah)) || AR_SREV_5416_20_OR_LATER(_ah))
+#define AR_SREV_5416_V22_OR_LATER(_ah) \
+	(AR_SREV_9100((_ah)) || AR_SREV_5416_22_OR_LATER(_ah))
+
+#define AR_ISR               0x0080
+#define AR_ISR_RXOK          0x00000001
+#define AR_ISR_RXDESC        0x00000002
+#define AR_ISR_RXERR         0x00000004
+#define AR_ISR_RXNOPKT       0x00000008
+#define AR_ISR_RXEOL         0x00000010
+#define AR_ISR_RXORN         0x00000020
+#define AR_ISR_TXOK          0x00000040
+#define AR_ISR_TXDESC        0x00000080
+#define AR_ISR_TXERR         0x00000100
+#define AR_ISR_TXNOPKT       0x00000200
+#define AR_ISR_TXEOL         0x00000400
+#define AR_ISR_TXURN         0x00000800
+#define AR_ISR_MIB           0x00001000
+#define AR_ISR_SWI           0x00002000
+#define AR_ISR_RXPHY         0x00004000
+#define AR_ISR_RXKCM         0x00008000
+#define AR_ISR_SWBA          0x00010000
+#define AR_ISR_BRSSI         0x00020000
+#define AR_ISR_BMISS         0x00040000
+#define AR_ISR_BNR           0x00100000
+#define AR_ISR_RXCHIRP       0x00200000
+#define AR_ISR_BCNMISC       0x00800000
+#define AR_ISR_TIM           0x00800000
+#define AR_ISR_QCBROVF       0x02000000
+#define AR_ISR_QCBRURN       0x04000000
+#define AR_ISR_QTRIG         0x08000000
+#define AR_ISR_GENTMR        0x10000000
+
+#define AR_ISR_TXMINTR       0x00080000
+#define AR_ISR_RXMINTR       0x01000000
+#define AR_ISR_TXINTM        0x40000000
+#define AR_ISR_RXINTM        0x80000000
+
+#define AR_ISR_S0               0x0084
+#define AR_ISR_S0_QCU_TXOK      0x000003FF
+#define AR_ISR_S0_QCU_TXOK_S    0
+#define AR_ISR_S0_QCU_TXDESC    0x03FF0000
+#define AR_ISR_S0_QCU_TXDESC_S  16
+
+#define AR_ISR_S1              0x0088
+#define AR_ISR_S1_QCU_TXERR    0x000003FF
+#define AR_ISR_S1_QCU_TXERR_S  0
+#define AR_ISR_S1_QCU_TXEOL    0x03FF0000
+#define AR_ISR_S1_QCU_TXEOL_S  16
+
+#define AR_ISR_S2              0x008c
+#define AR_ISR_S2_QCU_TXURN    0x000003FF
+#define AR_ISR_S2_CST          0x00400000
+#define AR_ISR_S2_GTT          0x00800000
+#define AR_ISR_S2_TIM          0x01000000
+#define AR_ISR_S2_CABEND       0x02000000
+#define AR_ISR_S2_DTIMSYNC     0x04000000
+#define AR_ISR_S2_BCNTO        0x08000000
+#define AR_ISR_S2_CABTO        0x10000000
+#define AR_ISR_S2_DTIM         0x20000000
+#define AR_ISR_S2_TSFOOR       0x40000000
+#define AR_ISR_S2_TBTT_TIME    0x80000000
+
+#define AR_ISR_S3             0x0090
+#define AR_ISR_S3_QCU_QCBROVF    0x000003FF
+#define AR_ISR_S3_QCU_QCBRURN    0x03FF0000
+
+#define AR_ISR_S4              0x0094
+#define AR_ISR_S4_QCU_QTRIG    0x000003FF
+#define AR_ISR_S4_RESV0        0xFFFFFC00
+
+#define AR_ISR_S5                   0x0098
+#define AR_ISR_S5_TIMER_TRIG        0x000000FF
+#define AR_ISR_S5_TIMER_THRESH      0x0007FE00
+#define AR_ISR_S5_TIM_TIMER         0x00000010
+#define AR_ISR_S5_DTIM_TIMER        0x00000020
+#define AR_ISR_S5_S                 0x00d8
+#define AR_IMR_S5                   0x00b8
+#define AR_IMR_S5_TIM_TIMER         0x00000010
+#define AR_IMR_S5_DTIM_TIMER        0x00000020
+
+
+#define AR_IMR               0x00a0
+#define AR_IMR_RXOK          0x00000001
+#define AR_IMR_RXDESC        0x00000002
+#define AR_IMR_RXERR         0x00000004
+#define AR_IMR_RXNOPKT       0x00000008
+#define AR_IMR_RXEOL         0x00000010
+#define AR_IMR_RXORN         0x00000020
+#define AR_IMR_TXOK          0x00000040
+#define AR_IMR_TXDESC        0x00000080
+#define AR_IMR_TXERR         0x00000100
+#define AR_IMR_TXNOPKT       0x00000200
+#define AR_IMR_TXEOL         0x00000400
+#define AR_IMR_TXURN         0x00000800
+#define AR_IMR_MIB           0x00001000
+#define AR_IMR_SWI           0x00002000
+#define AR_IMR_RXPHY         0x00004000
+#define AR_IMR_RXKCM         0x00008000
+#define AR_IMR_SWBA          0x00010000
+#define AR_IMR_BRSSI         0x00020000
+#define AR_IMR_BMISS         0x00040000
+#define AR_IMR_BNR           0x00100000
+#define AR_IMR_RXCHIRP       0x00200000
+#define AR_IMR_BCNMISC       0x00800000
+#define AR_IMR_TIM           0x00800000
+#define AR_IMR_QCBROVF       0x02000000
+#define AR_IMR_QCBRURN       0x04000000
+#define AR_IMR_QTRIG         0x08000000
+#define AR_IMR_GENTMR        0x10000000
+
+#define AR_IMR_TXMINTR       0x00080000
+#define AR_IMR_RXMINTR       0x01000000
+#define AR_IMR_TXINTM        0x40000000
+#define AR_IMR_RXINTM        0x80000000
+
+#define AR_IMR_S0               0x00a4
+#define AR_IMR_S0_QCU_TXOK      0x000003FF
+#define AR_IMR_S0_QCU_TXOK_S    0
+#define AR_IMR_S0_QCU_TXDESC    0x03FF0000
+#define AR_IMR_S0_QCU_TXDESC_S  16
+
+#define AR_IMR_S1              0x00a8
+#define AR_IMR_S1_QCU_TXERR    0x000003FF
+#define AR_IMR_S1_QCU_TXERR_S  0
+#define AR_IMR_S1_QCU_TXEOL    0x03FF0000
+#define AR_IMR_S1_QCU_TXEOL_S  16
+
+#define AR_IMR_S2              0x00ac
+#define AR_IMR_S2_QCU_TXURN    0x000003FF
+#define AR_IMR_S2_QCU_TXURN_S  0
+#define AR_IMR_S2_CST          0x00400000
+#define AR_IMR_S2_GTT          0x00800000
+#define AR_IMR_S2_TIM          0x01000000
+#define AR_IMR_S2_CABEND       0x02000000
+#define AR_IMR_S2_DTIMSYNC     0x04000000
+#define AR_IMR_S2_BCNTO        0x08000000
+#define AR_IMR_S2_CABTO        0x10000000
+#define AR_IMR_S2_DTIM         0x20000000
+#define AR_IMR_S2_TSFOOR       0x40000000
+
+#define AR_IMR_S3                0x00b0
+#define AR_IMR_S3_QCU_QCBROVF    0x000003FF
+#define AR_IMR_S3_QCU_QCBRURN    0x03FF0000
+#define AR_IMR_S3_QCU_QCBRURN_S  16
+
+#define AR_IMR_S4              0x00b4
+#define AR_IMR_S4_QCU_QTRIG    0x000003FF
+#define AR_IMR_S4_RESV0        0xFFFFFC00
+
+#define AR_IMR_S5              0x00b8
+#define AR_IMR_S5_TIMER_TRIG        0x000000FF
+#define AR_IMR_S5_TIMER_THRESH      0x0000FF00
+
+
+#define AR_ISR_RAC            0x00c0
+#define AR_ISR_S0_S           0x00c4
+#define AR_ISR_S0_QCU_TXOK      0x000003FF
+#define AR_ISR_S0_QCU_TXOK_S    0
+#define AR_ISR_S0_QCU_TXDESC    0x03FF0000
+#define AR_ISR_S0_QCU_TXDESC_S  16
+
+#define AR_ISR_S1_S           0x00c8
+#define AR_ISR_S1_QCU_TXERR    0x000003FF
+#define AR_ISR_S1_QCU_TXERR_S  0
+#define AR_ISR_S1_QCU_TXEOL    0x03FF0000
+#define AR_ISR_S1_QCU_TXEOL_S  16
+
+#define AR_ISR_S2_S           0x00cc
+#define AR_ISR_S3_S           0x00d0
+#define AR_ISR_S4_S           0x00d4
+#define AR_ISR_S5_S           0x00d8
+#define AR_DMADBG_0           0x00e0
+#define AR_DMADBG_1           0x00e4
+#define AR_DMADBG_2           0x00e8
+#define AR_DMADBG_3           0x00ec
+#define AR_DMADBG_4           0x00f0
+#define AR_DMADBG_5           0x00f4
+#define AR_DMADBG_6           0x00f8
+#define AR_DMADBG_7           0x00fc
+
+#define AR_NUM_QCU      10
+#define AR_QCU_0        0x0001
+#define AR_QCU_1        0x0002
+#define AR_QCU_2        0x0004
+#define AR_QCU_3        0x0008
+#define AR_QCU_4        0x0010
+#define AR_QCU_5        0x0020
+#define AR_QCU_6        0x0040
+#define AR_QCU_7        0x0080
+#define AR_QCU_8        0x0100
+#define AR_QCU_9        0x0200
+
+#define AR_Q0_TXDP           0x0800
+#define AR_Q1_TXDP           0x0804
+#define AR_Q2_TXDP           0x0808
+#define AR_Q3_TXDP           0x080c
+#define AR_Q4_TXDP           0x0810
+#define AR_Q5_TXDP           0x0814
+#define AR_Q6_TXDP           0x0818
+#define AR_Q7_TXDP           0x081c
+#define AR_Q8_TXDP           0x0820
+#define AR_Q9_TXDP           0x0824
+#define AR_QTXDP(_i)    (AR_Q0_TXDP + ((_i)<<2))
+
+#define AR_Q_TXE             0x0840
+#define AR_Q_TXE_M           0x000003FF
+
+#define AR_Q_TXD             0x0880
+#define AR_Q_TXD_M           0x000003FF
+
+#define AR_Q0_CBRCFG         0x08c0
+#define AR_Q1_CBRCFG         0x08c4
+#define AR_Q2_CBRCFG         0x08c8
+#define AR_Q3_CBRCFG         0x08cc
+#define AR_Q4_CBRCFG         0x08d0
+#define AR_Q5_CBRCFG         0x08d4
+#define AR_Q6_CBRCFG         0x08d8
+#define AR_Q7_CBRCFG         0x08dc
+#define AR_Q8_CBRCFG         0x08e0
+#define AR_Q9_CBRCFG         0x08e4
+#define AR_QCBRCFG(_i)      (AR_Q0_CBRCFG + ((_i)<<2))
+#define AR_Q_CBRCFG_INTERVAL     0x00FFFFFF
+#define AR_Q_CBRCFG_INTERVAL_S   0
+#define AR_Q_CBRCFG_OVF_THRESH   0xFF000000
+#define AR_Q_CBRCFG_OVF_THRESH_S 24
+
+#define AR_Q0_RDYTIMECFG         0x0900
+#define AR_Q1_RDYTIMECFG         0x0904
+#define AR_Q2_RDYTIMECFG         0x0908
+#define AR_Q3_RDYTIMECFG         0x090c
+#define AR_Q4_RDYTIMECFG         0x0910
+#define AR_Q5_RDYTIMECFG         0x0914
+#define AR_Q6_RDYTIMECFG         0x0918
+#define AR_Q7_RDYTIMECFG         0x091c
+#define AR_Q8_RDYTIMECFG         0x0920
+#define AR_Q9_RDYTIMECFG         0x0924
+#define AR_QRDYTIMECFG(_i)       (AR_Q0_RDYTIMECFG + ((_i)<<2))
+#define AR_Q_RDYTIMECFG_DURATION   0x00FFFFFF
+#define AR_Q_RDYTIMECFG_DURATION_S 0
+#define AR_Q_RDYTIMECFG_EN         0x01000000
+
+#define AR_Q_ONESHOTARM_SC       0x0940
+#define AR_Q_ONESHOTARM_SC_M     0x000003FF
+#define AR_Q_ONESHOTARM_SC_RESV0 0xFFFFFC00
+
+#define AR_Q_ONESHOTARM_CC       0x0980
+#define AR_Q_ONESHOTARM_CC_M     0x000003FF
+#define AR_Q_ONESHOTARM_CC_RESV0 0xFFFFFC00
+
+#define AR_Q0_MISC         0x09c0
+#define AR_Q1_MISC         0x09c4
+#define AR_Q2_MISC         0x09c8
+#define AR_Q3_MISC         0x09cc
+#define AR_Q4_MISC         0x09d0
+#define AR_Q5_MISC         0x09d4
+#define AR_Q6_MISC         0x09d8
+#define AR_Q7_MISC         0x09dc
+#define AR_Q8_MISC         0x09e0
+#define AR_Q9_MISC         0x09e4
+#define AR_QMISC(_i)       (AR_Q0_MISC + ((_i)<<2))
+#define AR_Q_MISC_FSP                     0x0000000F
+#define AR_Q_MISC_FSP_ASAP                0
+#define AR_Q_MISC_FSP_CBR                 1
+#define AR_Q_MISC_FSP_DBA_GATED           2
+#define AR_Q_MISC_FSP_TIM_GATED           3
+#define AR_Q_MISC_FSP_BEACON_SENT_GATED   4
+#define AR_Q_MISC_FSP_BEACON_RCVD_GATED   5
+#define AR_Q_MISC_ONE_SHOT_EN             0x00000010
+#define AR_Q_MISC_CBR_INCR_DIS1           0x00000020
+#define AR_Q_MISC_CBR_INCR_DIS0           0x00000040
+#define AR_Q_MISC_BEACON_USE              0x00000080
+#define AR_Q_MISC_CBR_EXP_CNTR_LIMIT_EN   0x00000100
+#define AR_Q_MISC_RDYTIME_EXP_POLICY      0x00000200
+#define AR_Q_MISC_RESET_CBR_EXP_CTR       0x00000400
+#define AR_Q_MISC_DCU_EARLY_TERM_REQ      0x00000800
+#define AR_Q_MISC_RESV0                   0xFFFFF000
+
+#define AR_Q0_STS         0x0a00
+#define AR_Q1_STS         0x0a04
+#define AR_Q2_STS         0x0a08
+#define AR_Q3_STS         0x0a0c
+#define AR_Q4_STS         0x0a10
+#define AR_Q5_STS         0x0a14
+#define AR_Q6_STS         0x0a18
+#define AR_Q7_STS         0x0a1c
+#define AR_Q8_STS         0x0a20
+#define AR_Q9_STS         0x0a24
+#define AR_QSTS(_i)       (AR_Q0_STS + ((_i)<<2))
+#define AR_Q_STS_PEND_FR_CNT          0x00000003
+#define AR_Q_STS_RESV0                0x000000FC
+#define AR_Q_STS_CBR_EXP_CNT          0x0000FF00
+#define AR_Q_STS_RESV1                0xFFFF0000
+
+#define AR_Q_RDYTIMESHDN    0x0a40
+#define AR_Q_RDYTIMESHDN_M  0x000003FF
+
+
+#define AR_NUM_DCU      10
+#define AR_DCU_0        0x0001
+#define AR_DCU_1        0x0002
+#define AR_DCU_2        0x0004
+#define AR_DCU_3        0x0008
+#define AR_DCU_4        0x0010
+#define AR_DCU_5        0x0020
+#define AR_DCU_6        0x0040
+#define AR_DCU_7        0x0080
+#define AR_DCU_8        0x0100
+#define AR_DCU_9        0x0200
+
+#define AR_D0_QCUMASK     0x1000
+#define AR_D1_QCUMASK     0x1004
+#define AR_D2_QCUMASK     0x1008
+#define AR_D3_QCUMASK     0x100c
+#define AR_D4_QCUMASK     0x1010
+#define AR_D5_QCUMASK     0x1014
+#define AR_D6_QCUMASK     0x1018
+#define AR_D7_QCUMASK     0x101c
+#define AR_D8_QCUMASK     0x1020
+#define AR_D9_QCUMASK     0x1024
+#define AR_DQCUMASK(_i)   (AR_D0_QCUMASK + ((_i)<<2))
+#define AR_D_QCUMASK         0x000003FF
+#define AR_D_QCUMASK_RESV0   0xFFFFFC00
+
+#define AR_D_TXBLK_CMD  0x1038
+#define AR_D_TXBLK_DATA(i) (AR_D_TXBLK_CMD+(i))
+
+#define AR_D0_LCL_IFS     0x1040
+#define AR_D1_LCL_IFS     0x1044
+#define AR_D2_LCL_IFS     0x1048
+#define AR_D3_LCL_IFS     0x104c
+#define AR_D4_LCL_IFS     0x1050
+#define AR_D5_LCL_IFS     0x1054
+#define AR_D6_LCL_IFS     0x1058
+#define AR_D7_LCL_IFS     0x105c
+#define AR_D8_LCL_IFS     0x1060
+#define AR_D9_LCL_IFS     0x1064
+#define AR_DLCL_IFS(_i)   (AR_D0_LCL_IFS + ((_i)<<2))
+#define AR_D_LCL_IFS_CWMIN       0x000003FF
+#define AR_D_LCL_IFS_CWMIN_S     0
+#define AR_D_LCL_IFS_CWMAX       0x000FFC00
+#define AR_D_LCL_IFS_CWMAX_S     10
+#define AR_D_LCL_IFS_AIFS        0x0FF00000
+#define AR_D_LCL_IFS_AIFS_S      20
+
+#define AR_D_LCL_IFS_RESV0    0xF0000000
+
+#define AR_D0_RETRY_LIMIT     0x1080
+#define AR_D1_RETRY_LIMIT     0x1084
+#define AR_D2_RETRY_LIMIT     0x1088
+#define AR_D3_RETRY_LIMIT     0x108c
+#define AR_D4_RETRY_LIMIT     0x1090
+#define AR_D5_RETRY_LIMIT     0x1094
+#define AR_D6_RETRY_LIMIT     0x1098
+#define AR_D7_RETRY_LIMIT     0x109c
+#define AR_D8_RETRY_LIMIT     0x10a0
+#define AR_D9_RETRY_LIMIT     0x10a4
+#define AR_DRETRY_LIMIT(_i)   (AR_D0_RETRY_LIMIT + ((_i)<<2))
+#define AR_D_RETRY_LIMIT_FR_SH       0x0000000F
+#define AR_D_RETRY_LIMIT_FR_SH_S     0
+#define AR_D_RETRY_LIMIT_STA_SH      0x00003F00
+#define AR_D_RETRY_LIMIT_STA_SH_S    8
+#define AR_D_RETRY_LIMIT_STA_LG      0x000FC000
+#define AR_D_RETRY_LIMIT_STA_LG_S    14
+#define AR_D_RETRY_LIMIT_RESV0       0xFFF00000
+
+#define AR_D0_CHNTIME     0x10c0
+#define AR_D1_CHNTIME     0x10c4
+#define AR_D2_CHNTIME     0x10c8
+#define AR_D3_CHNTIME     0x10cc
+#define AR_D4_CHNTIME     0x10d0
+#define AR_D5_CHNTIME     0x10d4
+#define AR_D6_CHNTIME     0x10d8
+#define AR_D7_CHNTIME     0x10dc
+#define AR_D8_CHNTIME     0x10e0
+#define AR_D9_CHNTIME     0x10e4
+#define AR_DCHNTIME(_i)   (AR_D0_CHNTIME + ((_i)<<2))
+#define AR_D_CHNTIME_DUR         0x000FFFFF
+#define AR_D_CHNTIME_DUR_S       0
+#define AR_D_CHNTIME_EN          0x00100000
+#define AR_D_CHNTIME_RESV0       0xFFE00000
+
+#define AR_D0_MISC        0x1100
+#define AR_D1_MISC        0x1104
+#define AR_D2_MISC        0x1108
+#define AR_D3_MISC        0x110c
+#define AR_D4_MISC        0x1110
+#define AR_D5_MISC        0x1114
+#define AR_D6_MISC        0x1118
+#define AR_D7_MISC        0x111c
+#define AR_D8_MISC        0x1120
+#define AR_D9_MISC        0x1124
+#define AR_DMISC(_i)      (AR_D0_MISC + ((_i)<<2))
+#define AR_D_MISC_BKOFF_THRESH        0x0000003F
+#define AR_D_MISC_RETRY_CNT_RESET_EN  0x00000040
+#define AR_D_MISC_CW_RESET_EN         0x00000080
+#define AR_D_MISC_FRAG_WAIT_EN        0x00000100
+#define AR_D_MISC_FRAG_BKOFF_EN       0x00000200
+#define AR_D_MISC_CW_BKOFF_EN         0x00001000
+#define AR_D_MISC_VIR_COL_HANDLING    0x0000C000
+#define AR_D_MISC_VIR_COL_HANDLING_S  14
+#define AR_D_MISC_VIR_COL_HANDLING_DEFAULT 0
+#define AR_D_MISC_VIR_COL_HANDLING_IGNORE  1
+#define AR_D_MISC_BEACON_USE          0x00010000
+#define AR_D_MISC_ARB_LOCKOUT_CNTRL   0x00060000
+#define AR_D_MISC_ARB_LOCKOUT_CNTRL_S 17
+#define AR_D_MISC_ARB_LOCKOUT_CNTRL_NONE     0
+#define AR_D_MISC_ARB_LOCKOUT_CNTRL_INTRA_FR 1
+#define AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL   2
+#define AR_D_MISC_ARB_LOCKOUT_IGNORE  0x00080000
+#define AR_D_MISC_SEQ_NUM_INCR_DIS    0x00100000
+#define AR_D_MISC_POST_FR_BKOFF_DIS   0x00200000
+#define AR_D_MISC_VIT_COL_CW_BKOFF_EN 0x00400000
+#define AR_D_MISC_BLOWN_IFS_RETRY_EN  0x00800000
+#define AR_D_MISC_RESV0               0xFF000000
+
+#define AR_D_SEQNUM      0x1140
+
+#define AR_D_GBL_IFS_SIFS         0x1030
+#define AR_D_GBL_IFS_SIFS_M       0x0000FFFF
+#define AR_D_GBL_IFS_SIFS_RESV0   0xFFFFFFFF
+
+#define AR_D_TXBLK_BASE            0x1038
+#define AR_D_TXBLK_WRITE_BITMASK    0x0000FFFF
+#define AR_D_TXBLK_WRITE_BITMASK_S  0
+#define AR_D_TXBLK_WRITE_SLICE      0x000F0000
+#define AR_D_TXBLK_WRITE_SLICE_S    16
+#define AR_D_TXBLK_WRITE_DCU        0x00F00000
+#define AR_D_TXBLK_WRITE_DCU_S      20
+#define AR_D_TXBLK_WRITE_COMMAND    0x0F000000
+#define AR_D_TXBLK_WRITE_COMMAND_S      24
+
+#define AR_D_GBL_IFS_SLOT         0x1070
+#define AR_D_GBL_IFS_SLOT_M       0x0000FFFF
+#define AR_D_GBL_IFS_SLOT_RESV0   0xFFFF0000
+
+#define AR_D_GBL_IFS_EIFS         0x10b0
+#define AR_D_GBL_IFS_EIFS_M       0x0000FFFF
+#define AR_D_GBL_IFS_EIFS_RESV0   0xFFFF0000
+
+#define AR_D_GBL_IFS_MISC        0x10f0
+#define AR_D_GBL_IFS_MISC_LFSR_SLICE_SEL        0x00000007
+#define AR_D_GBL_IFS_MISC_TURBO_MODE            0x00000008
+#define AR_D_GBL_IFS_MISC_USEC_DURATION         0x000FFC00
+#define AR_D_GBL_IFS_MISC_DCU_ARBITER_DLY       0x00300000
+#define AR_D_GBL_IFS_MISC_RANDOM_LFSR_SLICE_DIS 0x01000000
+#define AR_D_GBL_IFS_MISC_SLOT_XMIT_WIND_LEN    0x06000000
+#define AR_D_GBL_IFS_MISC_FORCE_XMIT_SLOT_BOUND 0x08000000
+#define AR_D_GBL_IFS_MISC_IGNORE_BACKOFF        0x10000000
+
+#define AR_D_FPCTL                  0x1230
+#define AR_D_FPCTL_DCU              0x0000000F
+#define AR_D_FPCTL_DCU_S            0
+#define AR_D_FPCTL_PREFETCH_EN      0x00000010
+#define AR_D_FPCTL_BURST_PREFETCH   0x00007FE0
+#define AR_D_FPCTL_BURST_PREFETCH_S 5
+
+#define AR_D_TXPSE                 0x1270
+#define AR_D_TXPSE_CTRL            0x000003FF
+#define AR_D_TXPSE_RESV0           0x0000FC00
+#define AR_D_TXPSE_STATUS          0x00010000
+#define AR_D_TXPSE_RESV1           0xFFFE0000
+
+#define AR_D_TXSLOTMASK            0x12f0
+#define AR_D_TXSLOTMASK_NUM        0x0000000F
+
+#define AR_CFG_LED                     0x1f04
+#define AR_CFG_SCLK_RATE_IND           0x00000003
+#define AR_CFG_SCLK_RATE_IND_S         0
+#define AR_CFG_SCLK_32MHZ              0x00000000
+#define AR_CFG_SCLK_4MHZ               0x00000001
+#define AR_CFG_SCLK_1MHZ               0x00000002
+#define AR_CFG_SCLK_32KHZ              0x00000003
+#define AR_CFG_LED_BLINK_SLOW          0x00000008
+#define AR_CFG_LED_BLINK_THRESH_SEL    0x00000070
+#define AR_CFG_LED_MODE_SEL            0x00000380
+#define AR_CFG_LED_MODE_SEL_S          7
+#define AR_CFG_LED_POWER               0x00000280
+#define AR_CFG_LED_POWER_S             7
+#define AR_CFG_LED_NETWORK             0x00000300
+#define AR_CFG_LED_NETWORK_S           7
+#define AR_CFG_LED_MODE_PROP           0x0
+#define AR_CFG_LED_MODE_RPROP          0x1
+#define AR_CFG_LED_MODE_SPLIT          0x2
+#define AR_CFG_LED_MODE_RAND           0x3
+#define AR_CFG_LED_MODE_POWER_OFF      0x4
+#define AR_CFG_LED_MODE_POWER_ON       0x5
+#define AR_CFG_LED_MODE_NETWORK_OFF    0x4
+#define AR_CFG_LED_MODE_NETWORK_ON     0x6
+#define AR_CFG_LED_ASSOC_CTL           0x00000c00
+#define AR_CFG_LED_ASSOC_CTL_S         10
+#define AR_CFG_LED_ASSOC_NONE          0x0
+#define AR_CFG_LED_ASSOC_ACTIVE        0x1
+#define AR_CFG_LED_ASSOC_PENDING       0x2
+
+#define AR_CFG_LED_BLINK_SLOW          0x00000008
+#define AR_CFG_LED_BLINK_SLOW_S        3
+
+#define AR_CFG_LED_BLINK_THRESH_SEL    0x00000070
+#define AR_CFG_LED_BLINK_THRESH_SEL_S  4
+
+#define AR_MAC_SLEEP                0x1f00
+#define AR_MAC_SLEEP_MAC_AWAKE      0x00000000
+#define AR_MAC_SLEEP_MAC_ASLEEP     0x00000001
+
+#define AR_RC                0x4000
+#define AR_RC_AHB            0x00000001
+#define AR_RC_APB            0x00000002
+#define AR_RC_HOSTIF         0x00000100
+
+#define AR_WA                0x4004
+
+#define AR_PM_STATE                 0x4008
+#define AR_PM_STATE_PME_D3COLD_VAUX 0x00100000
+
+#define AR_HOST_TIMEOUT             0x4018
+#define AR_HOST_TIMEOUT_APB_CNTR    0x0000FFFF
+#define AR_HOST_TIMEOUT_APB_CNTR_S  0
+#define AR_HOST_TIMEOUT_LCL_CNTR    0xFFFF0000
+#define AR_HOST_TIMEOUT_LCL_CNTR_S  16
+
+#define AR_EEPROM                0x401c
+#define AR_EEPROM_ABSENT         0x00000100
+#define AR_EEPROM_CORRUPT        0x00000200
+#define AR_EEPROM_PROT_MASK      0x03FFFC00
+#define AR_EEPROM_PROT_MASK_S    10
+
+#define EEPROM_PROTECT_RP_0_31        0x0001
+#define EEPROM_PROTECT_WP_0_31        0x0002
+#define EEPROM_PROTECT_RP_32_63       0x0004
+#define EEPROM_PROTECT_WP_32_63       0x0008
+#define EEPROM_PROTECT_RP_64_127      0x0010
+#define EEPROM_PROTECT_WP_64_127      0x0020
+#define EEPROM_PROTECT_RP_128_191     0x0040
+#define EEPROM_PROTECT_WP_128_191     0x0080
+#define EEPROM_PROTECT_RP_192_255     0x0100
+#define EEPROM_PROTECT_WP_192_255     0x0200
+#define EEPROM_PROTECT_RP_256_511     0x0400
+#define EEPROM_PROTECT_WP_256_511     0x0800
+#define EEPROM_PROTECT_RP_512_1023    0x1000
+#define EEPROM_PROTECT_WP_512_1023    0x2000
+#define EEPROM_PROTECT_RP_1024_2047   0x4000
+#define EEPROM_PROTECT_WP_1024_2047   0x8000
+
+#define AR_SREV \
+	((AR_SREV_9100(ah)) ? 0x0600 : 0x4020)
+
+#define AR_SREV_ID \
+	((AR_SREV_9100(ah)) ? 0x00000FFF : 0x000000FF)
+#define AR_SREV_VERSION                       0x000000F0
+#define AR_SREV_VERSION_S                     4
+#define AR_SREV_REVISION                      0x00000007
+
+#define AR_SREV_ID2                           0xFFFFFFFF
+#define AR_SREV_VERSION2        	      0xFFFC0000
+#define AR_SREV_VERSION2_S                    18
+#define AR_SREV_TYPE2        	      	      0x0003F000
+#define AR_SREV_TYPE2_S                       12
+#define AR_SREV_TYPE2_CHAIN		      0x00001000
+#define AR_SREV_TYPE2_HOST_MODE		      0x00002000
+#define AR_SREV_REVISION2        	      0x00000F00
+#define AR_SREV_REVISION2_S     	      8
+
+#define AR_SREV_VERSION_5416_PCI               0xD
+#define AR_SREV_VERSION_5416_PCIE              0xC
+#define AR_SREV_REVISION_5416_10               0
+#define AR_SREV_REVISION_5416_20               1
+#define AR_SREV_REVISION_5416_22               2
+#define AR_SREV_VERSION_9160        	      0x40
+#define AR_SREV_REVISION_9160_10    	      0
+#define AR_SREV_REVISION_9160_11    	      1
+#define AR_SREV_VERSION_9280                0x80
+#define AR_SREV_REVISION_9280_10            0
+#define AR_SREV_REVISION_9280_20            1
+#define AR_SREV_REVISION_9280_21            2
+#define AR_SREV_VERSION_9285                  0xC0
+#define AR_SREV_REVISION_9285_10              0
+
+#define AR_SREV_9100_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_5416_PCIE))
+#define AR_SREV_5416_20_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_9160) || \
+		((_ah)->ah_macRev >= AR_SREV_REVISION_5416_20))
+#define AR_SREV_5416_22_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_9160) || \
+		((_ah)->ah_macRev >= AR_SREV_REVISION_5416_22))
+#define AR_SREV_9160(_ah) \
+	(((_ah)->ah_macVersion == AR_SREV_VERSION_9160))
+#define AR_SREV_9160_10_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_9160))
+#define AR_SREV_9160_11(_ah) \
+	(AR_SREV_9160(_ah) && ((_ah)->ah_macRev == AR_SREV_REVISION_9160_11))
+#define AR_SREV_9280(_ah) \
+	(((_ah)->ah_macVersion == AR_SREV_VERSION_9280))
+#define AR_SREV_9280_10_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_9280))
+#define AR_SREV_9280_20(_ah) \
+	(((_ah)->ah_macVersion == AR_SREV_VERSION_9280) && \
+		((_ah)->ah_macRev >= AR_SREV_REVISION_9280_20))
+#define AR_SREV_9280_20_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion > AR_SREV_VERSION_9280) || \
+	(((_ah)->ah_macVersion == AR_SREV_VERSION_9280) && \
+	((_ah)->ah_macRev >= AR_SREV_REVISION_9280_20)))
+
+#define AR_SREV_9285(_ah) (((_ah)->ah_macVersion == AR_SREV_VERSION_9285))
+#define AR_SREV_9285_10_OR_LATER(_ah) \
+	(((_ah)->ah_macVersion >= AR_SREV_VERSION_9285))
+
+#define AR_RADIO_SREV_MAJOR                   0xf0
+#define AR_RAD5133_SREV_MAJOR                 0xc0
+#define AR_RAD2133_SREV_MAJOR                 0xd0
+#define AR_RAD5122_SREV_MAJOR                 0xe0
+#define AR_RAD2122_SREV_MAJOR                 0xf0
+
+#define AR_AHB_MODE                           0x4024
+#define AR_AHB_EXACT_WR_EN                    0x00000000
+#define AR_AHB_BUF_WR_EN                      0x00000001
+#define AR_AHB_EXACT_RD_EN                    0x00000000
+#define AR_AHB_CACHELINE_RD_EN                0x00000002
+#define AR_AHB_PREFETCH_RD_EN                 0x00000004
+#define AR_AHB_PAGE_SIZE_1K                   0x00000000
+#define AR_AHB_PAGE_SIZE_2K                   0x00000008
+#define AR_AHB_PAGE_SIZE_4K                   0x00000010
+
+#define AR_INTR_RTC_IRQ                       0x00000001
+#define AR_INTR_MAC_IRQ                       0x00000002
+#define AR_INTR_EEP_PROT_ACCESS               0x00000004
+#define AR_INTR_MAC_AWAKE                     0x00020000
+#define AR_INTR_MAC_ASLEEP                    0x00040000
+#define AR_INTR_SPURIOUS                      0xFFFFFFFF
+
+
+#define AR_INTR_SYNC_CAUSE_CLR                0x4028
+
+#define AR_INTR_SYNC_CAUSE                    0x4028
+
+#define AR_INTR_SYNC_ENABLE                   0x402c
+#define AR_INTR_SYNC_ENABLE_GPIO              0xFFFC0000
+#define AR_INTR_SYNC_ENABLE_GPIO_S            18
+
+enum {
+	AR_INTR_SYNC_RTC_IRQ = 0x00000001,
+	AR_INTR_SYNC_MAC_IRQ = 0x00000002,
+	AR_INTR_SYNC_EEPROM_ILLEGAL_ACCESS = 0x00000004,
+	AR_INTR_SYNC_APB_TIMEOUT = 0x00000008,
+	AR_INTR_SYNC_PCI_MODE_CONFLICT = 0x00000010,
+	AR_INTR_SYNC_HOST1_FATAL = 0x00000020,
+	AR_INTR_SYNC_HOST1_PERR = 0x00000040,
+	AR_INTR_SYNC_TRCV_FIFO_PERR = 0x00000080,
+	AR_INTR_SYNC_RADM_CPL_EP = 0x00000100,
+	AR_INTR_SYNC_RADM_CPL_DLLP_ABORT = 0x00000200,
+	AR_INTR_SYNC_RADM_CPL_TLP_ABORT = 0x00000400,
+	AR_INTR_SYNC_RADM_CPL_ECRC_ERR = 0x00000800,
+	AR_INTR_SYNC_RADM_CPL_TIMEOUT = 0x00001000,
+	AR_INTR_SYNC_LOCAL_TIMEOUT = 0x00002000,
+	AR_INTR_SYNC_PM_ACCESS = 0x00004000,
+	AR_INTR_SYNC_MAC_AWAKE = 0x00008000,
+	AR_INTR_SYNC_MAC_ASLEEP = 0x00010000,
+	AR_INTR_SYNC_MAC_SLEEP_ACCESS = 0x00020000,
+	AR_INTR_SYNC_ALL = 0x0003FFFF,
+
+
+	AR_INTR_SYNC_DEFAULT = (AR_INTR_SYNC_HOST1_FATAL |
+				AR_INTR_SYNC_HOST1_PERR |
+				AR_INTR_SYNC_RADM_CPL_EP |
+				AR_INTR_SYNC_RADM_CPL_DLLP_ABORT |
+				AR_INTR_SYNC_RADM_CPL_TLP_ABORT |
+				AR_INTR_SYNC_RADM_CPL_ECRC_ERR |
+				AR_INTR_SYNC_RADM_CPL_TIMEOUT |
+				AR_INTR_SYNC_LOCAL_TIMEOUT |
+				AR_INTR_SYNC_MAC_SLEEP_ACCESS),
+
+	AR_INTR_SYNC_SPURIOUS = 0xFFFFFFFF,
+
+};
+
+#define AR_INTR_ASYNC_MASK                       0x4030
+#define AR_INTR_ASYNC_MASK_GPIO                  0xFFFC0000
+#define AR_INTR_ASYNC_MASK_GPIO_S                18
+
+#define AR_INTR_SYNC_MASK                        0x4034
+#define AR_INTR_SYNC_MASK_GPIO                   0xFFFC0000
+#define AR_INTR_SYNC_MASK_GPIO_S                 18
+
+#define AR_INTR_ASYNC_CAUSE_CLR                  0x4038
+#define AR_INTR_ASYNC_CAUSE                      0x4038
+
+#define AR_INTR_ASYNC_ENABLE                     0x403c
+#define AR_INTR_ASYNC_ENABLE_GPIO                0xFFFC0000
+#define AR_INTR_ASYNC_ENABLE_GPIO_S              18
+
+#define AR_PCIE_SERDES                           0x4040
+#define AR_PCIE_SERDES2                          0x4044
+#define AR_PCIE_PM_CTRL                          0x4014
+#define AR_PCIE_PM_CTRL_ENA                      0x00080000
+
+#define AR_NUM_GPIO                              14
+#define AR928X_NUM_GPIO                          10
+
+#define AR_GPIO_IN_OUT                           0x4048
+#define AR_GPIO_IN_VAL                           0x0FFFC000
+#define AR_GPIO_IN_VAL_S                         14
+#define AR928X_GPIO_IN_VAL                       0x000FFC00
+#define AR928X_GPIO_IN_VAL_S                     10
+
+#define AR_GPIO_OE_OUT                           0x404c
+#define AR_GPIO_OE_OUT_DRV                       0x3
+#define AR_GPIO_OE_OUT_DRV_NO                    0x0
+#define AR_GPIO_OE_OUT_DRV_LOW                   0x1
+#define AR_GPIO_OE_OUT_DRV_HI                    0x2
+#define AR_GPIO_OE_OUT_DRV_ALL                   0x3
+
+#define AR_GPIO_INTR_POL                         0x4050
+#define AR_GPIO_INTR_POL_VAL                     0x00001FFF
+#define AR_GPIO_INTR_POL_VAL_S                   0
+
+#define AR_GPIO_INPUT_EN_VAL                     0x4054
+#define AR_GPIO_INPUT_EN_VAL_RFSILENT_DEF        0x00000080
+#define AR_GPIO_INPUT_EN_VAL_RFSILENT_DEF_S      7
+#define AR_GPIO_INPUT_EN_VAL_RFSILENT_BB         0x00008000
+#define AR_GPIO_INPUT_EN_VAL_RFSILENT_BB_S       15
+#define AR_GPIO_RTC_RESET_OVERRIDE_ENABLE        0x00010000
+#define AR_GPIO_JTAG_DISABLE                     0x00020000
+
+#define AR_GPIO_INPUT_MUX1                       0x4058
+
+#define AR_GPIO_INPUT_MUX2                       0x405c
+#define AR_GPIO_INPUT_MUX2_CLK25                 0x0000000f
+#define AR_GPIO_INPUT_MUX2_CLK25_S               0
+#define AR_GPIO_INPUT_MUX2_RFSILENT              0x000000f0
+#define AR_GPIO_INPUT_MUX2_RFSILENT_S            4
+#define AR_GPIO_INPUT_MUX2_RTC_RESET             0x00000f00
+#define AR_GPIO_INPUT_MUX2_RTC_RESET_S           8
+
+#define AR_GPIO_OUTPUT_MUX1                      0x4060
+#define AR_GPIO_OUTPUT_MUX2                      0x4064
+#define AR_GPIO_OUTPUT_MUX3                      0x4068
+
+#define AR_GPIO_OUTPUT_MUX_AS_OUTPUT             0
+#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1
+#define AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED     2
+#define AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED    5
+#define AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED      6
+
+#define AR_INPUT_STATE                           0x406c
+
+#define AR_EEPROM_STATUS_DATA                    0x407c
+#define AR_EEPROM_STATUS_DATA_VAL                0x0000ffff
+#define AR_EEPROM_STATUS_DATA_VAL_S              0
+#define AR_EEPROM_STATUS_DATA_BUSY               0x00010000
+#define AR_EEPROM_STATUS_DATA_BUSY_ACCESS        0x00020000
+#define AR_EEPROM_STATUS_DATA_PROT_ACCESS        0x00040000
+#define AR_EEPROM_STATUS_DATA_ABSENT_ACCESS      0x00080000
+
+#define AR_OBS                  0x4080
+
+#define AR_PCIE_MSI                              0x4094
+#define AR_PCIE_MSI_ENABLE                       0x00000001
+
+
+#define AR_RTC_9160_PLL_DIV	0x000003ff
+#define AR_RTC_9160_PLL_DIV_S   0
+#define AR_RTC_9160_PLL_REFDIV  0x00003C00
+#define AR_RTC_9160_PLL_REFDIV_S 10
+#define AR_RTC_9160_PLL_CLKSEL	0x0000C000
+#define AR_RTC_9160_PLL_CLKSEL_S 14
+
+#define AR_RTC_BASE             0x00020000
+#define AR_RTC_RC \
+	(AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0000) : 0x7000
+#define AR_RTC_RC_M		0x00000003
+#define AR_RTC_RC_MAC_WARM      0x00000001
+#define AR_RTC_RC_MAC_COLD      0x00000002
+#define AR_RTC_RC_COLD_RESET    0x00000004
+#define AR_RTC_RC_WARM_RESET    0x00000008
+
+#define AR_RTC_PLL_CONTROL \
+	(AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0014) : 0x7014
+
+#define AR_RTC_PLL_DIV          0x0000001f
+#define AR_RTC_PLL_DIV_S        0
+#define AR_RTC_PLL_DIV2         0x00000020
+#define AR_RTC_PLL_REFDIV_5     0x000000c0
+#define AR_RTC_PLL_CLKSEL       0x00000300
+#define AR_RTC_PLL_CLKSEL_S     8
+
+
+
+#define AR_RTC_RESET \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0040) : 0x7040)
+#define AR_RTC_RESET_EN		(0x00000001)
+
+#define AR_RTC_STATUS \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0044) : 0x7044)
+
+#define AR_RTC_STATUS_M \
+	((AR_SREV_9100(ah)) ? 0x0000003f : 0x0000000f)
+
+#define AR_RTC_PM_STATUS_M      0x0000000f
+
+#define AR_RTC_STATUS_SHUTDOWN  0x00000001
+#define AR_RTC_STATUS_ON        0x00000002
+#define AR_RTC_STATUS_SLEEP     0x00000004
+#define AR_RTC_STATUS_WAKEUP    0x00000008
+
+#define AR_RTC_SLEEP_CLK \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0048) : 0x7048)
+#define AR_RTC_FORCE_DERIVED_CLK    0x2
+
+#define AR_RTC_FORCE_WAKE \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x004c) : 0x704c)
+#define AR_RTC_FORCE_WAKE_EN        0x00000001
+#define AR_RTC_FORCE_WAKE_ON_INT    0x00000002
+
+
+#define AR_RTC_INTR_CAUSE \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0050) : 0x7050)
+
+#define AR_RTC_INTR_ENABLE \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0054) : 0x7054)
+
+#define AR_RTC_INTR_MASK \
+	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0058) : 0x7058)
+
+#define	AR_SEQ_MASK	0x8060
+
+#define AR_AN_RF2G1_CH0         0x7810
+#define AR_AN_RF2G1_CH0_OB      0x03800000
+#define AR_AN_RF2G1_CH0_OB_S    23
+#define AR_AN_RF2G1_CH0_DB      0x1C000000
+#define AR_AN_RF2G1_CH0_DB_S    26
+
+#define AR_AN_RF5G1_CH0         0x7818
+#define AR_AN_RF5G1_CH0_OB5     0x00070000
+#define AR_AN_RF5G1_CH0_OB5_S   16
+#define AR_AN_RF5G1_CH0_DB5     0x00380000
+#define AR_AN_RF5G1_CH0_DB5_S   19
+
+#define AR_AN_RF2G1_CH1         0x7834
+#define AR_AN_RF2G1_CH1_OB      0x03800000
+#define AR_AN_RF2G1_CH1_OB_S    23
+#define AR_AN_RF2G1_CH1_DB      0x1C000000
+#define AR_AN_RF2G1_CH1_DB_S    26
+
+#define AR_AN_RF5G1_CH1         0x783C
+#define AR_AN_RF5G1_CH1_OB5     0x00070000
+#define AR_AN_RF5G1_CH1_OB5_S   16
+#define AR_AN_RF5G1_CH1_DB5     0x00380000
+#define AR_AN_RF5G1_CH1_DB5_S   19
+
+#define AR_AN_TOP2                  0x7894
+#define AR_AN_TOP2_XPABIAS_LVL      0xC0000000
+#define AR_AN_TOP2_XPABIAS_LVL_S    30
+#define AR_AN_TOP2_LOCALBIAS        0x00200000
+#define AR_AN_TOP2_LOCALBIAS_S      21
+#define AR_AN_TOP2_PWDCLKIND        0x00400000
+#define AR_AN_TOP2_PWDCLKIND_S      22
+
+#define AR_AN_SYNTH9            0x7868
+#define AR_AN_SYNTH9_REFDIVA    0xf8000000
+#define AR_AN_SYNTH9_REFDIVA_S  27
+
+#define AR_STA_ID0                 0x8000
+#define AR_STA_ID1                 0x8004
+#define AR_STA_ID1_SADH_MASK       0x0000FFFF
+#define AR_STA_ID1_STA_AP          0x00010000
+#define AR_STA_ID1_ADHOC           0x00020000
+#define AR_STA_ID1_PWR_SAV         0x00040000
+#define AR_STA_ID1_KSRCHDIS        0x00080000
+#define AR_STA_ID1_PCF             0x00100000
+#define AR_STA_ID1_USE_DEFANT      0x00200000
+#define AR_STA_ID1_DEFANT_UPDATE   0x00400000
+#define AR_STA_ID1_RTS_USE_DEF     0x00800000
+#define AR_STA_ID1_ACKCTS_6MB      0x01000000
+#define AR_STA_ID1_BASE_RATE_11B   0x02000000
+#define AR_STA_ID1_SECTOR_SELF_GEN 0x04000000
+#define AR_STA_ID1_CRPT_MIC_ENABLE 0x08000000
+#define AR_STA_ID1_KSRCH_MODE      0x10000000
+#define AR_STA_ID1_PRESERVE_SEQNUM 0x20000000
+#define AR_STA_ID1_CBCIV_ENDIAN    0x40000000
+#define AR_STA_ID1_MCAST_KSRCH     0x80000000
+
+#define AR_BSS_ID0          0x8008
+#define AR_BSS_ID1          0x800C
+#define AR_BSS_ID1_U16       0x0000FFFF
+#define AR_BSS_ID1_AID       0x07FF0000
+#define AR_BSS_ID1_AID_S     16
+
+#define AR_BCN_RSSI_AVE      0x8010
+#define AR_BCN_RSSI_AVE_MASK 0x00000FFF
+
+#define AR_TIME_OUT         0x8014
+#define AR_TIME_OUT_ACK      0x00003FFF
+#define AR_TIME_OUT_ACK_S    0
+#define AR_TIME_OUT_CTS      0x3FFF0000
+#define AR_TIME_OUT_CTS_S    16
+
+#define AR_RSSI_THR          0x8018
+#define AR_RSSI_THR_MASK     0x000000FF
+#define AR_RSSI_THR_BM_THR   0x0000FF00
+#define AR_RSSI_THR_BM_THR_S 8
+#define AR_RSSI_BCN_WEIGHT   0x1F000000
+#define AR_RSSI_BCN_WEIGHT_S 24
+#define AR_RSSI_BCN_RSSI_RST 0x20000000
+
+#define AR_USEC              0x801c
+#define AR_USEC_USEC         0x0000007F
+#define AR_USEC_TX_LAT       0x007FC000
+#define AR_USEC_TX_LAT_S     14
+#define AR_USEC_RX_LAT       0x1F800000
+#define AR_USEC_RX_LAT_S     23
+
+#define AR_RESET_TSF        0x8020
+#define AR_RESET_TSF_ONCE   0x01000000
+
+#define AR_MAX_CFP_DUR      0x8038
+#define AR_CFP_VAL          0x0000FFFF
+
+#define AR_RX_FILTER        0x803C
+#define AR_RX_FILTER_ALL    0x00000000
+#define AR_RX_UCAST         0x00000001
+#define AR_RX_MCAST         0x00000002
+#define AR_RX_BCAST         0x00000004
+#define AR_RX_CONTROL       0x00000008
+#define AR_RX_BEACON        0x00000010
+#define AR_RX_PROM          0x00000020
+#define AR_RX_PROBE_REQ     0x00000080
+#define AR_RX_MY_BEACON     0x00000200
+#define AR_RX_COMPR_BAR     0x00000400
+#define AR_RX_COMPR_BA      0x00000800
+#define AR_RX_UNCOM_BA_BAR  0x00001000
+
+#define AR_MCAST_FIL0       0x8040
+#define AR_MCAST_FIL1       0x8044
+
+#define AR_DIAG_SW                  0x8048
+#define AR_DIAG_CACHE_ACK           0x00000001
+#define AR_DIAG_ACK_DIS             0x00000002
+#define AR_DIAG_CTS_DIS             0x00000004
+#define AR_DIAG_ENCRYPT_DIS         0x00000008
+#define AR_DIAG_DECRYPT_DIS         0x00000010
+#define AR_DIAG_RX_DIS              0x00000020
+#define AR_DIAG_LOOP_BACK           0x00000040
+#define AR_DIAG_CORR_FCS            0x00000080
+#define AR_DIAG_CHAN_INFO           0x00000100
+#define AR_DIAG_SCRAM_SEED          0x0001FE00
+#define AR_DIAG_SCRAM_SEED_S        8
+#define AR_DIAG_FRAME_NV0           0x00020000
+#define AR_DIAG_OBS_PT_SEL1         0x000C0000
+#define AR_DIAG_OBS_PT_SEL1_S       18
+#define AR_DIAG_FORCE_RX_CLEAR      0x00100000
+#define AR_DIAG_IGNORE_VIRT_CS      0x00200000
+#define AR_DIAG_FORCE_CH_IDLE_HIGH  0x00400000
+#define AR_DIAG_EIFS_CTRL_ENA       0x00800000
+#define AR_DIAG_DUAL_CHAIN_INFO     0x01000000
+#define AR_DIAG_RX_ABORT            0x02000000
+#define AR_DIAG_SATURATE_CYCLE_CNT  0x04000000
+#define AR_DIAG_OBS_PT_SEL2         0x08000000
+#define AR_DIAG_RX_CLEAR_CTL_LOW    0x10000000
+#define AR_DIAG_RX_CLEAR_EXT_LOW    0x20000000
+
+#define AR_TSF_L32          0x804c
+#define AR_TSF_U32          0x8050
+
+#define AR_TST_ADDAC        0x8054
+#define AR_DEF_ANTENNA      0x8058
+
+#define AR_AES_MUTE_MASK0       0x805c
+#define AR_AES_MUTE_MASK0_FC    0x0000FFFF
+#define AR_AES_MUTE_MASK0_QOS   0xFFFF0000
+#define AR_AES_MUTE_MASK0_QOS_S 16
+
+#define AR_AES_MUTE_MASK1       0x8060
+#define AR_AES_MUTE_MASK1_SEQ   0x0000FFFF
+
+#define AR_GATED_CLKS       0x8064
+#define AR_GATED_CLKS_TX    0x00000002
+#define AR_GATED_CLKS_RX    0x00000004
+#define AR_GATED_CLKS_REG   0x00000008
+
+#define AR_OBS_BUS_CTRL     0x8068
+#define AR_OBS_BUS_SEL_1    0x00040000
+#define AR_OBS_BUS_SEL_2    0x00080000
+#define AR_OBS_BUS_SEL_3    0x000C0000
+#define AR_OBS_BUS_SEL_4    0x08040000
+#define AR_OBS_BUS_SEL_5    0x08080000
+
+#define AR_OBS_BUS_1               0x806c
+#define AR_OBS_BUS_1_PCU           0x00000001
+#define AR_OBS_BUS_1_RX_END        0x00000002
+#define AR_OBS_BUS_1_RX_WEP        0x00000004
+#define AR_OBS_BUS_1_RX_BEACON     0x00000008
+#define AR_OBS_BUS_1_RX_FILTER     0x00000010
+#define AR_OBS_BUS_1_TX_HCF        0x00000020
+#define AR_OBS_BUS_1_QUIET_TIME    0x00000040
+#define AR_OBS_BUS_1_CHAN_IDLE     0x00000080
+#define AR_OBS_BUS_1_TX_HOLD       0x00000100
+#define AR_OBS_BUS_1_TX_FRAME      0x00000200
+#define AR_OBS_BUS_1_RX_FRAME      0x00000400
+#define AR_OBS_BUS_1_RX_CLEAR      0x00000800
+#define AR_OBS_BUS_1_WEP_STATE     0x0003F000
+#define AR_OBS_BUS_1_WEP_STATE_S   12
+#define AR_OBS_BUS_1_RX_STATE      0x01F00000
+#define AR_OBS_BUS_1_RX_STATE_S    20
+#define AR_OBS_BUS_1_TX_STATE      0x7E000000
+#define AR_OBS_BUS_1_TX_STATE_S    25
+
+#define AR_LAST_TSTP        0x8080
+#define AR_NAV              0x8084
+#define AR_RTS_OK           0x8088
+#define AR_RTS_FAIL         0x808c
+#define AR_ACK_FAIL         0x8090
+#define AR_FCS_FAIL         0x8094
+#define AR_BEACON_CNT       0x8098
+
+#define AR_SLEEP1               0x80d4
+#define AR_SLEEP1_ASSUME_DTIM   0x00080000
+#define AR_SLEEP1_CAB_TIMEOUT   0xFFE00000
+#define AR_SLEEP1_CAB_TIMEOUT_S 21
+
+#define AR_SLEEP2                   0x80d8
+#define AR_SLEEP2_BEACON_TIMEOUT    0xFFE00000
+#define AR_SLEEP2_BEACON_TIMEOUT_S  21
+
+#define AR_BSSMSKL            0x80e0
+#define AR_BSSMSKU            0x80e4
+
+#define AR_TPC                 0x80e8
+#define AR_TPC_ACK             0x0000003f
+#define AR_TPC_ACK_S           0x00
+#define AR_TPC_CTS             0x00003f00
+#define AR_TPC_CTS_S           0x08
+#define AR_TPC_CHIRP           0x003f0000
+#define AR_TPC_CHIRP_S         0x16
+
+#define AR_TFCNT           0x80ec
+#define AR_RFCNT           0x80f0
+#define AR_RCCNT           0x80f4
+#define AR_CCCNT           0x80f8
+
+#define AR_QUIET1          0x80fc
+#define AR_QUIET1_NEXT_QUIET_S         0
+#define AR_QUIET1_NEXT_QUIET_M         0x0000ffff
+#define AR_QUIET1_QUIET_ENABLE         0x00010000
+#define AR_QUIET1_QUIET_ACK_CTS_ENABLE 0x00020000
+#define AR_QUIET2          0x8100
+#define AR_QUIET2_QUIET_PERIOD_S       0
+#define AR_QUIET2_QUIET_PERIOD_M       0x0000ffff
+#define AR_QUIET2_QUIET_DUR_S     16
+#define AR_QUIET2_QUIET_DUR       0xffff0000
+
+#define AR_TSF_PARM        0x8104
+#define AR_TSF_INCREMENT_M     0x000000ff
+#define AR_TSF_INCREMENT_S     0x00
+
+#define AR_QOS_NO_ACK              0x8108
+#define AR_QOS_NO_ACK_TWO_BIT      0x0000000f
+#define AR_QOS_NO_ACK_TWO_BIT_S    0
+#define AR_QOS_NO_ACK_BIT_OFF      0x00000070
+#define AR_QOS_NO_ACK_BIT_OFF_S    4
+#define AR_QOS_NO_ACK_BYTE_OFF     0x00000180
+#define AR_QOS_NO_ACK_BYTE_OFF_S   7
+
+#define AR_PHY_ERR         0x810c
+
+#define AR_PHY_ERR_DCHIRP      0x00000008
+#define AR_PHY_ERR_RADAR       0x00000020
+#define AR_PHY_ERR_OFDM_TIMING 0x00020000
+#define AR_PHY_ERR_CCK_TIMING  0x02000000
+
+#define AR_RXFIFO_CFG          0x8114
+
+
+#define AR_MIC_QOS_CONTROL 0x8118
+#define AR_MIC_QOS_SELECT  0x811c
+
+#define AR_PCU_MISC                0x8120
+#define AR_PCU_FORCE_BSSID_MATCH   0x00000001
+#define AR_PCU_MIC_NEW_LOC_ENA     0x00000004
+#define AR_PCU_TX_ADD_TSF          0x00000008
+#define AR_PCU_CCK_SIFS_MODE       0x00000010
+#define AR_PCU_RX_ANT_UPDT         0x00000800
+#define AR_PCU_TXOP_TBTT_LIMIT_ENA 0x00001000
+#define AR_PCU_MISS_BCN_IN_SLEEP   0x00004000
+#define AR_PCU_BUG_12306_FIX_ENA   0x00020000
+#define AR_PCU_FORCE_QUIET_COLL    0x00040000
+#define AR_PCU_TBTT_PROTECT        0x00200000
+#define AR_PCU_CLEAR_VMF           0x01000000
+#define AR_PCU_CLEAR_BA_VALID      0x04000000
+
+
+#define AR_FILT_OFDM           0x8124
+#define AR_FILT_OFDM_COUNT     0x00FFFFFF
+
+#define AR_FILT_CCK            0x8128
+#define AR_FILT_CCK_COUNT      0x00FFFFFF
+
+#define AR_PHY_ERR_1           0x812c
+#define AR_PHY_ERR_1_COUNT     0x00FFFFFF
+#define AR_PHY_ERR_MASK_1      0x8130
+
+#define AR_PHY_ERR_2           0x8134
+#define AR_PHY_ERR_2_COUNT     0x00FFFFFF
+#define AR_PHY_ERR_MASK_2      0x8138
+
+#define AR_PHY_COUNTMAX        (3 << 22)
+#define AR_MIBCNT_INTRMASK     (3 << 22)
+
+#define AR_TSF_THRESHOLD       0x813c
+#define AR_TSF_THRESHOLD_VAL   0x0000FFFF
+
+#define AR_PHY_ERR_EIFS_MASK   8144
+
+#define AR_PHY_ERR_3           0x8168
+#define AR_PHY_ERR_3_COUNT     0x00FFFFFF
+#define AR_PHY_ERR_MASK_3      0x816c
+
+#define AR_TXSIFS              0x81d0
+#define AR_TXSIFS_TIME         0x000000FF
+#define AR_TXSIFS_TX_LATENCY   0x00000F00
+#define AR_TXSIFS_TX_LATENCY_S 8
+#define AR_TXSIFS_ACK_SHIFT    0x00007000
+#define AR_TXSIFS_ACK_SHIFT_S  12
+
+#define AR_TXOP_X          0x81ec
+#define AR_TXOP_X_VAL      0x000000FF
+
+
+#define AR_TXOP_0_3    0x81f0
+#define AR_TXOP_4_7    0x81f4
+#define AR_TXOP_8_11   0x81f8
+#define AR_TXOP_12_15  0x81fc
+
+
+#define AR_NEXT_TBTT_TIMER                  0x8200
+#define AR_NEXT_DMA_BEACON_ALERT            0x8204
+#define AR_NEXT_SWBA                        0x8208
+#define AR_NEXT_CFP                         0x8208
+#define AR_NEXT_HCF                         0x820C
+#define AR_NEXT_TIM                         0x8210
+#define AR_NEXT_DTIM                        0x8214
+#define AR_NEXT_QUIET_TIMER                 0x8218
+#define AR_NEXT_NDP_TIMER                   0x821C
+
+#define AR_BEACON_PERIOD                    0x8220
+#define AR_DMA_BEACON_PERIOD                0x8224
+#define AR_SWBA_PERIOD                      0x8228
+#define AR_HCF_PERIOD                       0x822C
+#define AR_TIM_PERIOD                       0x8230
+#define AR_DTIM_PERIOD                      0x8234
+#define AR_QUIET_PERIOD                     0x8238
+#define AR_NDP_PERIOD                       0x823C
+
+#define AR_TIMER_MODE                       0x8240
+#define AR_TBTT_TIMER_EN                    0x00000001
+#define AR_DBA_TIMER_EN                     0x00000002
+#define AR_SWBA_TIMER_EN                    0x00000004
+#define AR_HCF_TIMER_EN                     0x00000008
+#define AR_TIM_TIMER_EN                     0x00000010
+#define AR_DTIM_TIMER_EN                    0x00000020
+#define AR_QUIET_TIMER_EN                   0x00000040
+#define AR_NDP_TIMER_EN                     0x00000080
+#define AR_TIMER_OVERFLOW_INDEX             0x00000700
+#define AR_TIMER_OVERFLOW_INDEX_S           8
+#define AR_TIMER_THRESH                     0xFFFFF000
+#define AR_TIMER_THRESH_S                   12
+
+#define AR_SLP32_MODE                  0x8244
+#define AR_SLP32_HALF_CLK_LATENCY      0x000FFFFF
+#define AR_SLP32_ENA                   0x00100000
+#define AR_SLP32_TSF_WRITE_STATUS      0x00200000
+
+#define AR_SLP32_WAKE              0x8248
+#define AR_SLP32_WAKE_XTL_TIME     0x0000FFFF
+
+#define AR_SLP32_INC               0x824c
+#define AR_SLP32_TST_INC           0x000FFFFF
+
+#define AR_SLP_CNT         0x8250
+#define AR_SLP_CYCLE_CNT   0x8254
+
+#define AR_SLP_MIB_CTRL    0x8258
+#define AR_SLP_MIB_CLEAR   0x00000001
+#define AR_SLP_MIB_PENDING 0x00000002
+
+#define AR_2040_MODE                0x8318
+#define AR_2040_JOINED_RX_CLEAR 0x00000001
+
+
+#define AR_EXTRCCNT         0x8328
+
+#define AR_SELFGEN_MASK         0x832c
+
+#define AR_PCU_TXBUF_CTRL               0x8340
+#define AR_PCU_TXBUF_CTRL_SIZE_MASK     0x7FF
+#define AR_PCU_TXBUF_CTRL_USABLE_SIZE   0x700
+#define AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE   0x380
+
+#define AR_KEYTABLE_0           0x8800
+#define AR_KEYTABLE(_n)         (AR_KEYTABLE_0 + ((_n)*32))
+#define AR_KEY_CACHE_SIZE       128
+#define AR_RSVD_KEYTABLE_ENTRIES 4
+#define AR_KEY_TYPE             0x00000007
+#define AR_KEYTABLE_TYPE_40     0x00000000
+#define AR_KEYTABLE_TYPE_104    0x00000001
+#define AR_KEYTABLE_TYPE_128    0x00000003
+#define AR_KEYTABLE_TYPE_TKIP   0x00000004
+#define AR_KEYTABLE_TYPE_AES    0x00000005
+#define AR_KEYTABLE_TYPE_CCM    0x00000006
+#define AR_KEYTABLE_TYPE_CLR    0x00000007
+#define AR_KEYTABLE_ANT         0x00000008
+#define AR_KEYTABLE_VALID       0x00008000
+#define AR_KEYTABLE_KEY0(_n)    (AR_KEYTABLE(_n) + 0)
+#define AR_KEYTABLE_KEY1(_n)    (AR_KEYTABLE(_n) + 4)
+#define AR_KEYTABLE_KEY2(_n)    (AR_KEYTABLE(_n) + 8)
+#define AR_KEYTABLE_KEY3(_n)    (AR_KEYTABLE(_n) + 12)
+#define AR_KEYTABLE_KEY4(_n)    (AR_KEYTABLE(_n) + 16)
+#define AR_KEYTABLE_TYPE(_n)    (AR_KEYTABLE(_n) + 20)
+#define AR_KEYTABLE_MAC0(_n)    (AR_KEYTABLE(_n) + 24)
+#define AR_KEYTABLE_MAC1(_n)    (AR_KEYTABLE(_n) + 28)
+
+#endif
diff --git a/drivers/net/wireless/ath9k/regd.c b/drivers/net/wireless/ath9k/regd.c
new file mode 100644
index 00000000000..62e28887ccd
--- /dev/null
+++ b/drivers/net/wireless/ath9k/regd.c
@@ -0,0 +1,1026 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "hw.h"
+#include "regd.h"
+#include "regd_common.h"
+
+static int ath9k_regd_chansort(const void *a, const void *b)
+{
+	const struct ath9k_channel *ca = a;
+	const struct ath9k_channel *cb = b;
+
+	return (ca->channel == cb->channel) ?
+	    (ca->channelFlags & CHAN_FLAGS) -
+	    (cb->channelFlags & CHAN_FLAGS) : ca->channel - cb->channel;
+}
+
+static void
+ath9k_regd_sort(void *a, u32 n, u32 size, ath_hal_cmp_t *cmp)
+{
+	u8 *aa = a;
+	u8 *ai, *t;
+
+	for (ai = aa + size; --n >= 1; ai += size)
+		for (t = ai; t > aa; t -= size) {
+			u8 *u = t - size;
+			if (cmp(u, t) <= 0)
+				break;
+			swap(u, t, size);
+		}
+}
+
+static u16 ath9k_regd_get_eepromRD(struct ath_hal *ah)
+{
+	return ah->ah_currentRD & ~WORLDWIDE_ROAMING_FLAG;
+}
+
+static bool ath9k_regd_is_chan_bm_zero(u64 *bitmask)
+{
+	int i;
+
+	for (i = 0; i < BMLEN; i++) {
+		if (bitmask[i] != 0)
+			return false;
+	}
+	return true;
+}
+
+static bool ath9k_regd_is_eeprom_valid(struct ath_hal *ah)
+{
+	u16 rd = ath9k_regd_get_eepromRD(ah);
+	int i;
+
+	if (rd & COUNTRY_ERD_FLAG) {
+		u16 cc = rd & ~COUNTRY_ERD_FLAG;
+		for (i = 0; i < ARRAY_SIZE(allCountries); i++)
+			if (allCountries[i].countryCode == cc)
+				return true;
+	} else {
+		for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++)
+			if (regDomainPairs[i].regDmnEnum == rd)
+				return true;
+	}
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+		 "%s: invalid regulatory domain/country code 0x%x\n",
+		 __func__, rd);
+	return false;
+}
+
+static bool ath9k_regd_is_fcc_midband_supported(struct ath_hal *ah)
+{
+	u32 regcap;
+
+	regcap = ah->ah_caps.reg_cap;
+
+	if (regcap & AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND)
+		return true;
+	else
+		return false;
+}
+
+static bool ath9k_regd_is_ccode_valid(struct ath_hal *ah,
+				      u16 cc)
+{
+	u16 rd;
+	int i;
+
+	if (cc == CTRY_DEFAULT)
+		return true;
+	if (cc == CTRY_DEBUG)
+		return true;
+
+	rd = ath9k_regd_get_eepromRD(ah);
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY, "%s: EEPROM regdomain 0x%x\n",
+		 __func__, rd);
+
+	if (rd & COUNTRY_ERD_FLAG) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: EEPROM setting is country code %u\n",
+			__func__, rd & ~COUNTRY_ERD_FLAG);
+		return cc == (rd & ~COUNTRY_ERD_FLAG);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
+		if (cc == allCountries[i].countryCode) {
+#ifdef AH_SUPPORT_11D
+			if ((rd & WORLD_SKU_MASK) == WORLD_SKU_PREFIX)
+				return true;
+#endif
+			if (allCountries[i].regDmnEnum == rd ||
+			    rd == DEBUG_REG_DMN || rd == NO_ENUMRD)
+				return true;
+		}
+	}
+	return false;
+}
+
+static void
+ath9k_regd_get_wmodes_nreg(struct ath_hal *ah,
+			   struct country_code_to_enum_rd *country,
+			   struct regDomain *rd5GHz,
+			   unsigned long *modes_allowed)
+{
+	bitmap_copy(modes_allowed, ah->ah_caps.wireless_modes, ATH9K_MODE_MAX);
+
+	if (test_bit(ATH9K_MODE_11G, ah->ah_caps.wireless_modes) &&
+	    (!country->allow11g))
+		clear_bit(ATH9K_MODE_11G, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11A, ah->ah_caps.wireless_modes) &&
+	    (ath9k_regd_is_chan_bm_zero(rd5GHz->chan11a)))
+		clear_bit(ATH9K_MODE_11A, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NG_HT20, ah->ah_caps.wireless_modes)
+	    && (!country->allow11ng20))
+		clear_bit(ATH9K_MODE_11NG_HT20, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NA_HT20, ah->ah_caps.wireless_modes)
+	    && (!country->allow11na20))
+		clear_bit(ATH9K_MODE_11NA_HT20, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NG_HT40PLUS, ah->ah_caps.wireless_modes) &&
+	    (!country->allow11ng40))
+		clear_bit(ATH9K_MODE_11NG_HT40PLUS, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NG_HT40MINUS, ah->ah_caps.wireless_modes) &&
+	    (!country->allow11ng40))
+		clear_bit(ATH9K_MODE_11NG_HT40MINUS, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NA_HT40PLUS, ah->ah_caps.wireless_modes) &&
+	    (!country->allow11na40))
+		clear_bit(ATH9K_MODE_11NA_HT40PLUS, modes_allowed);
+
+	if (test_bit(ATH9K_MODE_11NA_HT40MINUS, ah->ah_caps.wireless_modes) &&
+	    (!country->allow11na40))
+		clear_bit(ATH9K_MODE_11NA_HT40MINUS, modes_allowed);
+}
+
+bool ath9k_regd_is_public_safety_sku(struct ath_hal *ah)
+{
+	u16 rd;
+
+	rd = ath9k_regd_get_eepromRD(ah);
+
+	switch (rd) {
+	case FCC4_FCCA:
+	case (CTRY_UNITED_STATES_FCC49 | COUNTRY_ERD_FLAG):
+		return true;
+	case DEBUG_REG_DMN:
+	case NO_ENUMRD:
+		if (ah->ah_countryCode == CTRY_UNITED_STATES_FCC49)
+			return true;
+		break;
+	}
+	return false;
+}
+
+static struct country_code_to_enum_rd*
+ath9k_regd_find_country(u16 countryCode)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
+		if (allCountries[i].countryCode == countryCode)
+			return &allCountries[i];
+	}
+	return NULL;
+}
+
+static u16 ath9k_regd_get_default_country(struct ath_hal *ah)
+{
+	u16 rd;
+	int i;
+
+	rd = ath9k_regd_get_eepromRD(ah);
+	if (rd & COUNTRY_ERD_FLAG) {
+		struct country_code_to_enum_rd *country = NULL;
+		u16 cc = rd & ~COUNTRY_ERD_FLAG;
+
+		country = ath9k_regd_find_country(cc);
+		if (country != NULL)
+			return cc;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++)
+		if (regDomainPairs[i].regDmnEnum == rd) {
+			if (regDomainPairs[i].singleCC != 0)
+				return regDomainPairs[i].singleCC;
+			else
+				i = ARRAY_SIZE(regDomainPairs);
+		}
+	return CTRY_DEFAULT;
+}
+
+static bool ath9k_regd_is_valid_reg_domain(int regDmn,
+					   struct regDomain *rd)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(regDomains); i++) {
+		if (regDomains[i].regDmnEnum == regDmn) {
+			if (rd != NULL) {
+				memcpy(rd, &regDomains[i],
+				       sizeof(struct regDomain));
+			}
+			return true;
+		}
+	}
+	return false;
+}
+
+static bool ath9k_regd_is_valid_reg_domainPair(int regDmnPair)
+{
+	int i;
+
+	if (regDmnPair == NO_ENUMRD)
+		return false;
+	for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++) {
+		if (regDomainPairs[i].regDmnEnum == regDmnPair)
+			return true;
+	}
+	return false;
+}
+
+static bool
+ath9k_regd_get_wmode_regdomain(struct ath_hal *ah, int regDmn,
+			       u16 channelFlag, struct regDomain *rd)
+{
+	int i, found;
+	u64 flags = NO_REQ;
+	struct reg_dmn_pair_mapping *regPair = NULL;
+	int regOrg;
+
+	regOrg = regDmn;
+	if (regDmn == CTRY_DEFAULT) {
+		u16 rdnum;
+		rdnum = ath9k_regd_get_eepromRD(ah);
+
+		if (!(rdnum & COUNTRY_ERD_FLAG)) {
+			if (ath9k_regd_is_valid_reg_domain(rdnum, NULL) ||
+			    ath9k_regd_is_valid_reg_domainPair(rdnum)) {
+				regDmn = rdnum;
+			}
+		}
+	}
+
+	if ((regDmn & MULTI_DOMAIN_MASK) == 0) {
+		for (i = 0, found = 0;
+		     (i < ARRAY_SIZE(regDomainPairs)) && (!found); i++) {
+			if (regDomainPairs[i].regDmnEnum == regDmn) {
+				regPair = &regDomainPairs[i];
+				found = 1;
+			}
+		}
+		if (!found) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"%s: Failed to find reg domain pair %u\n",
+				__func__, regDmn);
+			return false;
+		}
+		if (!(channelFlag & CHANNEL_2GHZ)) {
+			regDmn = regPair->regDmn5GHz;
+			flags = regPair->flags5GHz;
+		}
+		if (channelFlag & CHANNEL_2GHZ) {
+			regDmn = regPair->regDmn2GHz;
+			flags = regPair->flags2GHz;
+		}
+	}
+
+	found = ath9k_regd_is_valid_reg_domain(regDmn, rd);
+	if (!found) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: Failed to find unitary reg domain %u\n",
+			__func__, regDmn);
+		return false;
+	} else {
+		rd->pscan &= regPair->pscanMask;
+		if (((regOrg & MULTI_DOMAIN_MASK) == 0) &&
+		    (flags != NO_REQ)) {
+			rd->flags = flags;
+		}
+
+		rd->flags &= (channelFlag & CHANNEL_2GHZ) ?
+		    REG_DOMAIN_2GHZ_MASK : REG_DOMAIN_5GHZ_MASK;
+		return true;
+	}
+}
+
+static bool ath9k_regd_is_bit_set(int bit, u64 *bitmask)
+{
+	int byteOffset, bitnum;
+	u64 val;
+
+	byteOffset = bit / 64;
+	bitnum = bit - byteOffset * 64;
+	val = ((u64) 1) << bitnum;
+	if (bitmask[byteOffset] & val)
+		return true;
+	else
+		return false;
+}
+
+static void
+ath9k_regd_add_reg_classid(u8 *regclassids, u32 maxregids,
+			   u32 *nregids, u8 regclassid)
+{
+	int i;
+
+	if (regclassid == 0)
+		return;
+
+	for (i = 0; i < maxregids; i++) {
+		if (regclassids[i] == regclassid)
+			return;
+		if (regclassids[i] == 0)
+			break;
+	}
+
+	if (i == maxregids)
+		return;
+	else {
+		regclassids[i] = regclassid;
+		*nregids += 1;
+	}
+
+	return;
+}
+
+static bool
+ath9k_regd_get_eeprom_reg_ext_bits(struct ath_hal *ah,
+				   enum reg_ext_bitmap bit)
+{
+	return (ah->ah_currentRDExt & (1 << bit)) ? true : false;
+}
+
+#ifdef ATH_NF_PER_CHAN
+
+static void ath9k_regd_init_rf_buffer(struct ath9k_channel *ichans,
+				      int nchans)
+{
+	int i, j, next;
+
+	for (next = 0; next < nchans; next++) {
+		for (i = 0; i < NUM_NF_READINGS; i++) {
+			ichans[next].nfCalHist[i].currIndex = 0;
+			ichans[next].nfCalHist[i].privNF =
+			    AR_PHY_CCA_MAX_GOOD_VALUE;
+			ichans[next].nfCalHist[i].invalidNFcount =
+			    AR_PHY_CCA_FILTERWINDOW_LENGTH;
+			for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) {
+				ichans[next].nfCalHist[i].nfCalBuffer[j] =
+				    AR_PHY_CCA_MAX_GOOD_VALUE;
+			}
+		}
+	}
+}
+#endif
+
+static int ath9k_regd_is_chan_present(struct ath_hal *ah,
+				      u16 c)
+{
+	int i;
+
+	for (i = 0; i < 150; i++) {
+		if (!ah->ah_channels[i].channel)
+			return -1;
+		else if (ah->ah_channels[i].channel == c)
+			return i;
+	}
+
+	return -1;
+}
+
+static bool
+ath9k_regd_add_channel(struct ath_hal *ah,
+		       u16 c,
+		       u16 c_lo,
+		       u16 c_hi,
+		       u16 maxChan,
+		       u8 ctl,
+		       int pos,
+		       struct regDomain rd5GHz,
+		       struct RegDmnFreqBand *fband,
+		       struct regDomain *rd,
+		       const struct cmode *cm,
+		       struct ath9k_channel *ichans,
+		       bool enableExtendedChannels)
+{
+	struct ath9k_channel *chan;
+	int ret;
+	u32 channelFlags = 0;
+	u8 privFlags = 0;
+
+	if (!(c_lo <= c && c <= c_hi)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: c %u out of range [%u..%u]\n",
+			__func__, c, c_lo, c_hi);
+		return false;
+	}
+	if ((fband->channelBW == CHANNEL_HALF_BW) &&
+	    !(ah->ah_caps.hw_caps & ATH9K_HW_CAP_CHAN_HALFRATE)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: Skipping %u half rate channel\n",
+			__func__, c);
+		return false;
+	}
+
+	if ((fband->channelBW == CHANNEL_QUARTER_BW) &&
+	    !(ah->ah_caps.hw_caps & ATH9K_HW_CAP_CHAN_QUARTERRATE)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: Skipping %u quarter rate channel\n",
+			__func__, c);
+		return false;
+	}
+
+	if (((c + fband->channelSep) / 2) > (maxChan + HALF_MAXCHANBW)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: c %u > maxChan %u\n",
+			__func__, c, maxChan);
+		return false;
+	}
+
+	if ((fband->usePassScan & IS_ECM_CHAN) && !enableExtendedChannels) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"Skipping ecm channel\n");
+		return false;
+	}
+
+	if ((rd->flags & NO_HOSTAP) && (ah->ah_opmode == ATH9K_M_HOSTAP)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"Skipping HOSTAP channel\n");
+		return false;
+	}
+
+	if (IS_HT40_MODE(cm->mode) &&
+	    !(ath9k_regd_get_eeprom_reg_ext_bits(ah, REG_EXT_FCC_DFS_HT40)) &&
+	    (fband->useDfs) &&
+	    (rd->conformanceTestLimit != MKK)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"Skipping HT40 channel (en_fcc_dfs_ht40 = 0)\n");
+		return false;
+	}
+
+	if (IS_HT40_MODE(cm->mode) &&
+	    !(ath9k_regd_get_eeprom_reg_ext_bits(ah,
+						 REG_EXT_JAPAN_NONDFS_HT40)) &&
+	    !(fband->useDfs) && (rd->conformanceTestLimit == MKK)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"Skipping HT40 channel (en_jap_ht40 = 0)\n");
+		return false;
+	}
+
+	if (IS_HT40_MODE(cm->mode) &&
+	    !(ath9k_regd_get_eeprom_reg_ext_bits(ah, REG_EXT_JAPAN_DFS_HT40)) &&
+	    (fband->useDfs) &&
+	    (rd->conformanceTestLimit == MKK)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"Skipping HT40 channel (en_jap_dfs_ht40 = 0)\n");
+		return false;
+	}
+
+	/* Calculate channel flags */
+
+	channelFlags = cm->flags;
+
+	switch (fband->channelBW) {
+	case CHANNEL_HALF_BW:
+		channelFlags |= CHANNEL_HALF;
+		break;
+	case CHANNEL_QUARTER_BW:
+		channelFlags |= CHANNEL_QUARTER;
+		break;
+	}
+
+	if (fband->usePassScan & rd->pscan)
+		channelFlags |= CHANNEL_PASSIVE;
+	else
+		channelFlags &= ~CHANNEL_PASSIVE;
+	if (fband->useDfs & rd->dfsMask)
+		privFlags = CHANNEL_DFS;
+	else
+		privFlags = 0;
+	if (rd->flags & LIMIT_FRAME_4MS)
+		privFlags |= CHANNEL_4MS_LIMIT;
+	if (privFlags & CHANNEL_DFS)
+		privFlags |= CHANNEL_DISALLOW_ADHOC;
+	if (rd->flags & ADHOC_PER_11D)
+		privFlags |= CHANNEL_PER_11D_ADHOC;
+
+	if (channelFlags & CHANNEL_PASSIVE) {
+		if ((c < 2412) || (c > 2462)) {
+			if (rd5GHz.regDmnEnum == MKK1 ||
+			    rd5GHz.regDmnEnum == MKK2) {
+				u32 regcap = ah->ah_caps.reg_cap;
+				if (!(regcap &
+				      (AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN |
+				       AR_EEPROM_EEREGCAP_EN_KK_U2 |
+				       AR_EEPROM_EEREGCAP_EN_KK_MIDBAND)) &&
+				    isUNII1OddChan(c)) {
+					channelFlags &= ~CHANNEL_PASSIVE;
+				} else {
+					privFlags |= CHANNEL_DISALLOW_ADHOC;
+				}
+			} else {
+				privFlags |= CHANNEL_DISALLOW_ADHOC;
+			}
+		}
+	}
+
+	if ((cm->mode == ATH9K_MODE_11A) ||
+	    (cm->mode == ATH9K_MODE_11NA_HT20) ||
+	    (cm->mode == ATH9K_MODE_11NA_HT40PLUS) ||
+	    (cm->mode == ATH9K_MODE_11NA_HT40MINUS)) {
+		if (rd->flags & (ADHOC_NO_11A | DISALLOW_ADHOC_11A))
+			privFlags |= CHANNEL_DISALLOW_ADHOC;
+	}
+
+	/* Fill in channel details */
+
+	ret = ath9k_regd_is_chan_present(ah, c);
+	if (ret == -1) {
+		chan = &ah->ah_channels[pos];
+		chan->channel = c;
+		chan->maxRegTxPower = fband->powerDfs;
+		chan->antennaMax = fband->antennaMax;
+		chan->regDmnFlags = rd->flags;
+		chan->maxTxPower = AR5416_MAX_RATE_POWER;
+		chan->minTxPower = AR5416_MAX_RATE_POWER;
+		chan->channelFlags = channelFlags;
+		chan->privFlags = privFlags;
+	} else {
+		chan = &ah->ah_channels[ret];
+		chan->channelFlags |= channelFlags;
+		chan->privFlags |= privFlags;
+	}
+
+	/* Set CTLs */
+
+	if ((cm->flags & CHANNEL_ALL) == CHANNEL_A)
+		chan->conformanceTestLimit[0] = ctl;
+	else if ((cm->flags & CHANNEL_ALL) == CHANNEL_B)
+		chan->conformanceTestLimit[1] = ctl;
+	else if ((cm->flags & CHANNEL_ALL) == CHANNEL_G)
+		chan->conformanceTestLimit[2] = ctl;
+
+	return (ret == -1) ? true : false;
+}
+
+static bool ath9k_regd_japan_check(struct ath_hal *ah,
+				   int b,
+				   struct regDomain *rd5GHz)
+{
+	bool skipband = false;
+	int i;
+	u32 regcap;
+
+	for (i = 0; i < ARRAY_SIZE(j_bandcheck); i++) {
+		if (j_bandcheck[i].freqbandbit == b) {
+			regcap = ah->ah_caps.reg_cap;
+			if ((j_bandcheck[i].eepromflagtocheck & regcap) == 0) {
+				skipband = true;
+			} else if ((regcap & AR_EEPROM_EEREGCAP_EN_KK_U2) ||
+				  (regcap & AR_EEPROM_EEREGCAP_EN_KK_MIDBAND)) {
+				rd5GHz->dfsMask |= DFS_MKK4;
+				rd5GHz->pscan |= PSCAN_MKK3;
+			}
+			break;
+		}
+	}
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+		"%s: Skipping %d freq band\n",
+		__func__, j_bandcheck[i].freqbandbit);
+
+	return skipband;
+}
+
+bool
+ath9k_regd_init_channels(struct ath_hal *ah,
+			 u32 maxchans,
+			 u32 *nchans, u8 *regclassids,
+			 u32 maxregids, u32 *nregids, u16 cc,
+			 bool enableOutdoor,
+			 bool enableExtendedChannels)
+{
+	u16 maxChan = 7000;
+	struct country_code_to_enum_rd *country = NULL;
+	struct regDomain rd5GHz, rd2GHz;
+	const struct cmode *cm;
+	struct ath9k_channel *ichans = &ah->ah_channels[0];
+	int next = 0, b;
+	u8 ctl;
+	int regdmn;
+	u16 chanSep;
+	unsigned long *modes_avail;
+	DECLARE_BITMAP(modes_allowed, ATH9K_MODE_MAX);
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY, "%s: cc %u %s %s\n",
+		 __func__, cc,
+		 enableOutdoor ? "Enable outdoor" : "",
+		 enableExtendedChannels ? "Enable ecm" : "");
+
+	if (!ath9k_regd_is_ccode_valid(ah, cc)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: invalid country code %d\n", __func__, cc);
+		return false;
+	}
+
+	if (!ath9k_regd_is_eeprom_valid(ah)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: invalid EEPROM contents\n", __func__);
+		return false;
+	}
+
+	ah->ah_countryCode = ath9k_regd_get_default_country(ah);
+
+	if (ah->ah_countryCode == CTRY_DEFAULT) {
+		ah->ah_countryCode = cc & COUNTRY_CODE_MASK;
+		if ((ah->ah_countryCode == CTRY_DEFAULT) &&
+		    (ath9k_regd_get_eepromRD(ah) == CTRY_DEFAULT)) {
+			ah->ah_countryCode = CTRY_UNITED_STATES;
+		}
+	}
+
+#ifdef AH_SUPPORT_11D
+	if (ah->ah_countryCode == CTRY_DEFAULT) {
+		regdmn = ath9k_regd_get_eepromRD(ah);
+		country = NULL;
+	} else {
+#endif
+		country = ath9k_regd_find_country(ah->ah_countryCode);
+		if (country == NULL) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"Country is NULL!!!!, cc= %d\n",
+				ah->ah_countryCode);
+			return false;
+		} else {
+			regdmn = country->regDmnEnum;
+#ifdef AH_SUPPORT_11D
+			if (((ath9k_regd_get_eepromRD(ah) &
+			      WORLD_SKU_MASK) == WORLD_SKU_PREFIX) &&
+			    (cc == CTRY_UNITED_STATES)) {
+				if (!isWwrSKU_NoMidband(ah)
+				    && ath9k_regd_is_fcc_midband_supported(ah))
+					regdmn = FCC3_FCCA;
+				else
+					regdmn = FCC1_FCCA;
+			}
+#endif
+		}
+#ifdef AH_SUPPORT_11D
+	}
+#endif
+	if (!ath9k_regd_get_wmode_regdomain(ah,
+					    regdmn,
+					    ~CHANNEL_2GHZ,
+					    &rd5GHz)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: couldn't find unitary "
+			"5GHz reg domain for country %u\n",
+			__func__, ah->ah_countryCode);
+		return false;
+	}
+	if (!ath9k_regd_get_wmode_regdomain(ah,
+					    regdmn,
+					    CHANNEL_2GHZ,
+					    &rd2GHz)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: couldn't find unitary 2GHz "
+			"reg domain for country %u\n",
+			__func__, ah->ah_countryCode);
+		return false;
+	}
+
+	if (!isWwrSKU(ah) && ((rd5GHz.regDmnEnum == FCC1) ||
+			      (rd5GHz.regDmnEnum == FCC2))) {
+		if (ath9k_regd_is_fcc_midband_supported(ah)) {
+			if (!ath9k_regd_get_wmode_regdomain(ah,
+							    FCC3_FCCA,
+							    ~CHANNEL_2GHZ,
+							    &rd5GHz)) {
+				DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+					"%s: couldn't find unitary 5GHz "
+					"reg domain for country %u\n",
+					__func__, ah->ah_countryCode);
+				return false;
+			}
+		}
+	}
+
+	if (country == NULL) {
+		modes_avail = ah->ah_caps.wireless_modes;
+	} else {
+		ath9k_regd_get_wmodes_nreg(ah, country, &rd5GHz, modes_allowed);
+		modes_avail = modes_allowed;
+
+		if (!enableOutdoor)
+			maxChan = country->outdoorChanStart;
+	}
+
+	next = 0;
+
+	if (maxchans > ARRAY_SIZE(ah->ah_channels))
+		maxchans = ARRAY_SIZE(ah->ah_channels);
+
+	for (cm = modes; cm < &modes[ARRAY_SIZE(modes)]; cm++) {
+		u16 c, c_hi, c_lo;
+		u64 *channelBM = NULL;
+		struct regDomain *rd = NULL;
+		struct RegDmnFreqBand *fband = NULL, *freqs;
+		int8_t low_adj = 0, hi_adj = 0;
+
+		if (!test_bit(cm->mode, modes_avail)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"%s: !avail mode %d flags 0x%x\n",
+				__func__, cm->mode, cm->flags);
+			continue;
+		}
+		if (!ath9k_get_channel_edges(ah, cm->flags, &c_lo, &c_hi)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"%s: channels 0x%x not supported "
+				"by hardware\n",
+				__func__, cm->flags);
+			continue;
+		}
+
+		switch (cm->mode) {
+		case ATH9K_MODE_11A:
+		case ATH9K_MODE_11NA_HT20:
+		case ATH9K_MODE_11NA_HT40PLUS:
+		case ATH9K_MODE_11NA_HT40MINUS:
+			rd = &rd5GHz;
+			channelBM = rd->chan11a;
+			freqs = &regDmn5GhzFreq[0];
+			ctl = rd->conformanceTestLimit;
+			break;
+		case ATH9K_MODE_11B:
+			rd = &rd2GHz;
+			channelBM = rd->chan11b;
+			freqs = &regDmn2GhzFreq[0];
+			ctl = rd->conformanceTestLimit | CTL_11B;
+			break;
+		case ATH9K_MODE_11G:
+		case ATH9K_MODE_11NG_HT20:
+		case ATH9K_MODE_11NG_HT40PLUS:
+		case ATH9K_MODE_11NG_HT40MINUS:
+			rd = &rd2GHz;
+			channelBM = rd->chan11g;
+			freqs = &regDmn2Ghz11gFreq[0];
+			ctl = rd->conformanceTestLimit | CTL_11G;
+			break;
+		default:
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"%s: Unknown HAL mode 0x%x\n", __func__,
+				cm->mode);
+			continue;
+		}
+
+		if (ath9k_regd_is_chan_bm_zero(channelBM))
+			continue;
+
+		if ((cm->mode == ATH9K_MODE_11NA_HT40PLUS) ||
+		    (cm->mode == ATH9K_MODE_11NG_HT40PLUS)) {
+			hi_adj = -20;
+		}
+
+		if ((cm->mode == ATH9K_MODE_11NA_HT40MINUS) ||
+		    (cm->mode == ATH9K_MODE_11NG_HT40MINUS)) {
+			low_adj = 20;
+		}
+
+		/* XXX: Add a helper here instead */
+		for (b = 0; b < 64 * BMLEN; b++) {
+			if (ath9k_regd_is_bit_set(b, channelBM)) {
+				fband = &freqs[b];
+				if (rd5GHz.regDmnEnum == MKK1
+				    || rd5GHz.regDmnEnum == MKK2) {
+					if (ath9k_regd_japan_check(ah,
+								   b,
+								   &rd5GHz))
+						continue;
+				}
+
+				ath9k_regd_add_reg_classid(regclassids,
+							   maxregids,
+							   nregids,
+							   fband->
+							   regClassId);
+
+				if (IS_HT40_MODE(cm->mode) && (rd == &rd5GHz)) {
+					chanSep = 40;
+					if (fband->lowChannel == 5280)
+						low_adj += 20;
+
+					if (fband->lowChannel == 5170)
+						continue;
+				} else
+					chanSep = fband->channelSep;
+
+				for (c = fband->lowChannel + low_adj;
+				     ((c <= (fband->highChannel + hi_adj)) &&
+				      (c >= (fband->lowChannel + low_adj)));
+				     c += chanSep) {
+					if (next >= maxchans) {
+						DPRINTF(ah->ah_sc,
+							ATH_DBG_REGULATORY,
+							"%s: too many channels "
+							"for channel table\n",
+							__func__);
+						goto done;
+					}
+					if (ath9k_regd_add_channel(ah,
+						   c, c_lo, c_hi,
+						   maxChan, ctl,
+						   next,
+						   rd5GHz,
+						   fband, rd, cm,
+						   ichans,
+						   enableExtendedChannels))
+						next++;
+				}
+				if (IS_HT40_MODE(cm->mode) &&
+				    (fband->lowChannel == 5280)) {
+					low_adj -= 20;
+				}
+			}
+		}
+	}
+done:
+	if (next != 0) {
+		int i;
+
+		if (next > ARRAY_SIZE(ah->ah_channels)) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"%s: too many channels %u; truncating to %u\n",
+				__func__, next,
+				(int) ARRAY_SIZE(ah->ah_channels));
+			next = ARRAY_SIZE(ah->ah_channels);
+		}
+#ifdef ATH_NF_PER_CHAN
+		ath9k_regd_init_rf_buffer(ichans, next);
+#endif
+		ath9k_regd_sort(ichans, next,
+				sizeof(struct ath9k_channel),
+				ath9k_regd_chansort);
+
+		ah->ah_nchan = next;
+
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY, "Channel list:\n");
+		for (i = 0; i < next; i++) {
+			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+				"chan: %d flags: 0x%x\n",
+				ah->ah_channels[i].channel,
+				ah->ah_channels[i].channelFlags);
+		}
+	}
+	*nchans = next;
+
+	ah->ah_countryCode = ah->ah_countryCode;
+
+	ah->ah_currentRDInUse = regdmn;
+	ah->ah_currentRD5G = rd5GHz.regDmnEnum;
+	ah->ah_currentRD2G = rd2GHz.regDmnEnum;
+	if (country == NULL) {
+		ah->ah_iso[0] = 0;
+		ah->ah_iso[1] = 0;
+	} else {
+		ah->ah_iso[0] = country->isoName[0];
+		ah->ah_iso[1] = country->isoName[1];
+	}
+
+	return next != 0;
+}
+
+struct ath9k_channel*
+ath9k_regd_check_channel(struct ath_hal *ah,
+			 const struct ath9k_channel *c)
+{
+	struct ath9k_channel *base, *cc;
+
+	int flags = c->channelFlags & CHAN_FLAGS;
+	int n, lim;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+		"%s: channel %u/0x%x (0x%x) requested\n", __func__,
+		c->channel, c->channelFlags, flags);
+
+	cc = ah->ah_curchan;
+	if (cc != NULL && cc->channel == c->channel &&
+	    (cc->channelFlags & CHAN_FLAGS) == flags) {
+		if ((cc->privFlags & CHANNEL_INTERFERENCE) &&
+		    (cc->privFlags & CHANNEL_DFS))
+			return NULL;
+		else
+			return cc;
+	}
+
+	base = ah->ah_channels;
+	n = ah->ah_nchan;
+
+	for (lim = n; lim != 0; lim >>= 1) {
+		int d;
+		cc = &base[lim >> 1];
+		d = c->channel - cc->channel;
+		if (d == 0) {
+			if ((cc->channelFlags & CHAN_FLAGS) == flags) {
+				if ((cc->privFlags & CHANNEL_INTERFERENCE) &&
+				    (cc->privFlags & CHANNEL_DFS))
+					return NULL;
+				else
+					return cc;
+			}
+			d = flags - (cc->channelFlags & CHAN_FLAGS);
+		}
+		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
+			"%s: channel %u/0x%x d %d\n", __func__,
+			cc->channel, cc->channelFlags, d);
+		if (d > 0) {
+			base = cc + 1;
+			lim--;
+		}
+	}
+	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY, "%s: no match for %u/0x%x\n",
+		__func__, c->channel, c->channelFlags);
+	return NULL;
+}
+
+u32
+ath9k_regd_get_antenna_allowed(struct ath_hal *ah,
+			       struct ath9k_channel *chan)
+{
+	struct ath9k_channel *ichan = NULL;
+
+	ichan = ath9k_regd_check_channel(ah, chan);
+	if (!ichan)
+		return 0;
+
+	return ichan->antennaMax;
+}
+
+u32 ath9k_regd_get_ctl(struct ath_hal *ah, struct ath9k_channel *chan)
+{
+	u32 ctl = NO_CTL;
+	struct ath9k_channel *ichan;
+
+	if (ah->ah_countryCode == CTRY_DEFAULT && isWwrSKU(ah)) {
+		if (IS_CHAN_B(chan))
+			ctl = SD_NO_CTL | CTL_11B;
+		else if (IS_CHAN_G(chan))
+			ctl = SD_NO_CTL | CTL_11G;
+		else
+			ctl = SD_NO_CTL | CTL_11A;
+	} else {
+		ichan = ath9k_regd_check_channel(ah, chan);
+		if (ichan != NULL) {
+			/* FIXME */
+			if (IS_CHAN_A(ichan))
+				ctl = ichan->conformanceTestLimit[0];
+			else if (IS_CHAN_B(ichan))
+				ctl = ichan->conformanceTestLimit[1];
+			else if (IS_CHAN_G(ichan))
+				ctl = ichan->conformanceTestLimit[2];
+
+			if (IS_CHAN_G(chan) && (ctl & 0xf) == CTL_11B)
+				ctl = (ctl & ~0xf) | CTL_11G;
+		}
+	}
+	return ctl;
+}
+
+void ath9k_regd_get_current_country(struct ath_hal *ah,
+				    struct ath9k_country_entry *ctry)
+{
+	u16 rd = ath9k_regd_get_eepromRD(ah);
+
+	ctry->isMultidomain = false;
+	if (rd == CTRY_DEFAULT)
+		ctry->isMultidomain = true;
+	else if (!(rd & COUNTRY_ERD_FLAG))
+		ctry->isMultidomain = isWwrSKU(ah);
+
+	ctry->countryCode = ah->ah_countryCode;
+	ctry->regDmnEnum = ah->ah_currentRD;
+	ctry->regDmn5G = ah->ah_currentRD5G;
+	ctry->regDmn2G = ah->ah_currentRD2G;
+	ctry->iso[0] = ah->ah_iso[0];
+	ctry->iso[1] = ah->ah_iso[1];
+	ctry->iso[2] = ah->ah_iso[2];
+}
diff --git a/drivers/net/wireless/ath9k/regd.h b/drivers/net/wireless/ath9k/regd.h
new file mode 100644
index 00000000000..0ecd344fbd9
--- /dev/null
+++ b/drivers/net/wireless/ath9k/regd.h
@@ -0,0 +1,412 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef REGD_H
+#define REGD_H
+
+#include "ath9k.h"
+
+#define BMLEN 2
+#define BMZERO {(u64) 0, (u64) 0}
+
+#define BM(_fa, _fb, _fc, _fd, _fe, _ff, _fg, _fh, _fi, _fj, _fk, _fl) \
+	{((((_fa >= 0) && (_fa < 64)) ? \
+		(((u64) 1) << _fa) : (u64) 0) | \
+	(((_fb >= 0) && (_fb < 64)) ? \
+		(((u64) 1) << _fb) : (u64) 0) | \
+	(((_fc >= 0) && (_fc < 64)) ? \
+		(((u64) 1) << _fc) : (u64) 0) | \
+	(((_fd >= 0) && (_fd < 64)) ? \
+		(((u64) 1) << _fd) : (u64) 0) | \
+	(((_fe >= 0) && (_fe < 64)) ? \
+		(((u64) 1) << _fe) : (u64) 0) | \
+	(((_ff >= 0) && (_ff < 64)) ? \
+		(((u64) 1) << _ff) : (u64) 0) | \
+	(((_fg >= 0) && (_fg < 64)) ? \
+		(((u64) 1) << _fg) : (u64) 0) | \
+	(((_fh >= 0) && (_fh < 64)) ? \
+		(((u64) 1) << _fh) : (u64) 0) | \
+	(((_fi >= 0) && (_fi < 64)) ? \
+		(((u64) 1) << _fi) : (u64) 0) | \
+	(((_fj >= 0) && (_fj < 64)) ? \
+		(((u64) 1) << _fj) : (u64) 0) | \
+	(((_fk >= 0) && (_fk < 64)) ? \
+		(((u64) 1) << _fk) : (u64) 0) | \
+	(((_fl >= 0) && (_fl < 64)) ? \
+		(((u64) 1) << _fl) : (u64) 0) | \
+			((((_fa > 63) && (_fa < 128)) ? \
+			(((u64) 1) << (_fa - 64)) : (u64) 0) | \
+	(((_fb > 63) && (_fb < 128)) ? \
+		(((u64) 1) << (_fb - 64)) : (u64) 0) | \
+	(((_fc > 63) && (_fc < 128)) ? \
+		(((u64) 1) << (_fc - 64)) : (u64) 0) | \
+	(((_fd > 63) && (_fd < 128)) ? \
+		(((u64) 1) << (_fd - 64)) : (u64) 0) | \
+	(((_fe > 63) && (_fe < 128)) ? \
+		(((u64) 1) << (_fe - 64)) : (u64) 0) | \
+	(((_ff > 63) && (_ff < 128)) ? \
+		(((u64) 1) << (_ff - 64)) : (u64) 0) | \
+	(((_fg > 63) && (_fg < 128)) ? \
+		(((u64) 1) << (_fg - 64)) : (u64) 0) | \
+	(((_fh > 63) && (_fh < 128)) ? \
+		(((u64) 1) << (_fh - 64)) : (u64) 0) | \
+	(((_fi > 63) && (_fi < 128)) ? \
+		(((u64) 1) << (_fi - 64)) : (u64) 0) | \
+	(((_fj > 63) && (_fj < 128)) ? \
+		(((u64) 1) << (_fj - 64)) : (u64) 0) | \
+	(((_fk > 63) && (_fk < 128)) ? \
+		(((u64) 1) << (_fk - 64)) : (u64) 0) | \
+	(((_fl > 63) && (_fl < 128)) ? \
+		(((u64) 1) << (_fl - 64)) : (u64) 0)))}
+
+#define DEF_REGDMN      FCC1_FCCA
+#define DEF_DMN_5       FCC1
+#define DEF_DMN_2       FCCA
+#define COUNTRY_ERD_FLAG        0x8000
+#define WORLDWIDE_ROAMING_FLAG  0x4000
+#define SUPER_DOMAIN_MASK   0x0fff
+#define COUNTRY_CODE_MASK   0x3fff
+#define CF_INTERFERENCE     (CHANNEL_CW_INT | CHANNEL_RADAR_INT)
+#define CHANNEL_14      (2484)
+#define IS_11G_CH14(_ch,_cf) \
+    (((_ch) == CHANNEL_14) && ((_cf) == CHANNEL_G))
+
+#define NO_PSCAN    0x0ULL
+#define PSCAN_FCC   0x0000000000000001ULL
+#define PSCAN_FCC_T 0x0000000000000002ULL
+#define PSCAN_ETSI  0x0000000000000004ULL
+#define PSCAN_MKK1  0x0000000000000008ULL
+#define PSCAN_MKK2  0x0000000000000010ULL
+#define PSCAN_MKKA  0x0000000000000020ULL
+#define PSCAN_MKKA_G    0x0000000000000040ULL
+#define PSCAN_ETSIA 0x0000000000000080ULL
+#define PSCAN_ETSIB 0x0000000000000100ULL
+#define PSCAN_ETSIC 0x0000000000000200ULL
+#define PSCAN_WWR   0x0000000000000400ULL
+#define PSCAN_MKKA1 0x0000000000000800ULL
+#define PSCAN_MKKA1_G   0x0000000000001000ULL
+#define PSCAN_MKKA2 0x0000000000002000ULL
+#define PSCAN_MKKA2_G   0x0000000000004000ULL
+#define PSCAN_MKK3  0x0000000000008000ULL
+#define PSCAN_DEFER 0x7FFFFFFFFFFFFFFFULL
+#define IS_ECM_CHAN 0x8000000000000000ULL
+
+#define isWwrSKU(_ah) \
+	(((ath9k_regd_get_eepromRD((_ah)) & WORLD_SKU_MASK) == \
+		WORLD_SKU_PREFIX) || \
+		(ath9k_regd_get_eepromRD(_ah) == WORLD))
+
+#define isWwrSKU_NoMidband(_ah) \
+	((ath9k_regd_get_eepromRD((_ah)) == WOR3_WORLD) || \
+	(ath9k_regd_get_eepromRD(_ah) == WOR4_WORLD) || \
+	(ath9k_regd_get_eepromRD(_ah) == WOR5_ETSIC))
+
+#define isUNII1OddChan(ch) \
+	((ch == 5170) || (ch == 5190) || (ch == 5210) || (ch == 5230))
+
+#define IS_HT40_MODE(_mode)					\
+	(((_mode == ATH9K_MODE_11NA_HT40PLUS  ||		\
+	   _mode == ATH9K_MODE_11NG_HT40PLUS    ||		\
+	   _mode == ATH9K_MODE_11NA_HT40MINUS   ||		\
+	   _mode == ATH9K_MODE_11NG_HT40MINUS) ? true : false))
+
+#define CHAN_FLAGS      (CHANNEL_ALL|CHANNEL_HALF|CHANNEL_QUARTER)
+
+#define swap(_a, _b, _size) {                   \
+	u8 *s = _b;                       \
+	int i = _size;                          \
+	do {                                    \
+		u8 tmp = *_a;             \
+		*_a++ = *s;                     \
+		*s++ = tmp;                     \
+	} while (--i);                          \
+	_a -= _size;                            \
+}
+
+
+#define HALF_MAXCHANBW          10
+
+#define MULTI_DOMAIN_MASK 0xFF00
+
+#define WORLD_SKU_MASK          0x00F0
+#define WORLD_SKU_PREFIX        0x0060
+
+#define CHANNEL_HALF_BW         10
+#define CHANNEL_QUARTER_BW      5
+
+typedef int ath_hal_cmp_t(const void *, const void *);
+
+struct reg_dmn_pair_mapping {
+	u16 regDmnEnum;
+	u16 regDmn5GHz;
+	u16 regDmn2GHz;
+	u32 flags5GHz;
+	u32 flags2GHz;
+	u64 pscanMask;
+	u16 singleCC;
+};
+
+struct ccmap {
+	char isoName[3];
+	u16 countryCode;
+};
+
+struct country_code_to_enum_rd {
+	u16 countryCode;
+	u16 regDmnEnum;
+	const char *isoName;
+	const char *name;
+	bool allow11g;
+	bool allow11aTurbo;
+	bool allow11gTurbo;
+	bool allow11ng20;
+	bool allow11ng40;
+	bool allow11na20;
+	bool allow11na40;
+	u16 outdoorChanStart;
+};
+
+struct RegDmnFreqBand {
+	u16 lowChannel;
+	u16 highChannel;
+	u8 powerDfs;
+	u8 antennaMax;
+	u8 channelBW;
+	u8 channelSep;
+	u64 useDfs;
+	u64 usePassScan;
+	u8 regClassId;
+};
+
+struct regDomain {
+	u16 regDmnEnum;
+	u8 conformanceTestLimit;
+	u64 dfsMask;
+	u64 pscan;
+	u32 flags;
+	u64 chan11a[BMLEN];
+	u64 chan11a_turbo[BMLEN];
+	u64 chan11a_dyn_turbo[BMLEN];
+	u64 chan11b[BMLEN];
+	u64 chan11g[BMLEN];
+	u64 chan11g_turbo[BMLEN];
+};
+
+struct cmode {
+	u32 mode;
+	u32 flags;
+};
+
+#define YES true
+#define NO  false
+
+struct japan_bandcheck {
+	u16 freqbandbit;
+	u32 eepromflagtocheck;
+};
+
+struct common_mode_power {
+	u16 lchan;
+	u16 hchan;
+	u8 pwrlvl;
+};
+
+enum CountryCode {
+	CTRY_ALBANIA = 8,
+	CTRY_ALGERIA = 12,
+	CTRY_ARGENTINA = 32,
+	CTRY_ARMENIA = 51,
+	CTRY_AUSTRALIA = 36,
+	CTRY_AUSTRIA = 40,
+	CTRY_AZERBAIJAN = 31,
+	CTRY_BAHRAIN = 48,
+	CTRY_BELARUS = 112,
+	CTRY_BELGIUM = 56,
+	CTRY_BELIZE = 84,
+	CTRY_BOLIVIA = 68,
+	CTRY_BOSNIA_HERZ = 70,
+	CTRY_BRAZIL = 76,
+	CTRY_BRUNEI_DARUSSALAM = 96,
+	CTRY_BULGARIA = 100,
+	CTRY_CANADA = 124,
+	CTRY_CHILE = 152,
+	CTRY_CHINA = 156,
+	CTRY_COLOMBIA = 170,
+	CTRY_COSTA_RICA = 188,
+	CTRY_CROATIA = 191,
+	CTRY_CYPRUS = 196,
+	CTRY_CZECH = 203,
+	CTRY_DENMARK = 208,
+	CTRY_DOMINICAN_REPUBLIC = 214,
+	CTRY_ECUADOR = 218,
+	CTRY_EGYPT = 818,
+	CTRY_EL_SALVADOR = 222,
+	CTRY_ESTONIA = 233,
+	CTRY_FAEROE_ISLANDS = 234,
+	CTRY_FINLAND = 246,
+	CTRY_FRANCE = 250,
+	CTRY_GEORGIA = 268,
+	CTRY_GERMANY = 276,
+	CTRY_GREECE = 300,
+	CTRY_GUATEMALA = 320,
+	CTRY_HONDURAS = 340,
+	CTRY_HONG_KONG = 344,
+	CTRY_HUNGARY = 348,
+	CTRY_ICELAND = 352,
+	CTRY_INDIA = 356,
+	CTRY_INDONESIA = 360,
+	CTRY_IRAN = 364,
+	CTRY_IRAQ = 368,
+	CTRY_IRELAND = 372,
+	CTRY_ISRAEL = 376,
+	CTRY_ITALY = 380,
+	CTRY_JAMAICA = 388,
+	CTRY_JAPAN = 392,
+	CTRY_JORDAN = 400,
+	CTRY_KAZAKHSTAN = 398,
+	CTRY_KENYA = 404,
+	CTRY_KOREA_NORTH = 408,
+	CTRY_KOREA_ROC = 410,
+	CTRY_KOREA_ROC2 = 411,
+	CTRY_KOREA_ROC3 = 412,
+	CTRY_KUWAIT = 414,
+	CTRY_LATVIA = 428,
+	CTRY_LEBANON = 422,
+	CTRY_LIBYA = 434,
+	CTRY_LIECHTENSTEIN = 438,
+	CTRY_LITHUANIA = 440,
+	CTRY_LUXEMBOURG = 442,
+	CTRY_MACAU = 446,
+	CTRY_MACEDONIA = 807,
+	CTRY_MALAYSIA = 458,
+	CTRY_MALTA = 470,
+	CTRY_MEXICO = 484,
+	CTRY_MONACO = 492,
+	CTRY_MOROCCO = 504,
+	CTRY_NEPAL = 524,
+	CTRY_NETHERLANDS = 528,
+	CTRY_NETHERLANDS_ANTILLES = 530,
+	CTRY_NEW_ZEALAND = 554,
+	CTRY_NICARAGUA = 558,
+	CTRY_NORWAY = 578,
+	CTRY_OMAN = 512,
+	CTRY_PAKISTAN = 586,
+	CTRY_PANAMA = 591,
+	CTRY_PAPUA_NEW_GUINEA = 598,
+	CTRY_PARAGUAY = 600,
+	CTRY_PERU = 604,
+	CTRY_PHILIPPINES = 608,
+	CTRY_POLAND = 616,
+	CTRY_PORTUGAL = 620,
+	CTRY_PUERTO_RICO = 630,
+	CTRY_QATAR = 634,
+	CTRY_ROMANIA = 642,
+	CTRY_RUSSIA = 643,
+	CTRY_SAUDI_ARABIA = 682,
+	CTRY_SERBIA_MONTENEGRO = 891,
+	CTRY_SINGAPORE = 702,
+	CTRY_SLOVAKIA = 703,
+	CTRY_SLOVENIA = 705,
+	CTRY_SOUTH_AFRICA = 710,
+	CTRY_SPAIN = 724,
+	CTRY_SRI_LANKA = 144,
+	CTRY_SWEDEN = 752,
+	CTRY_SWITZERLAND = 756,
+	CTRY_SYRIA = 760,
+	CTRY_TAIWAN = 158,
+	CTRY_THAILAND = 764,
+	CTRY_TRINIDAD_Y_TOBAGO = 780,
+	CTRY_TUNISIA = 788,
+	CTRY_TURKEY = 792,
+	CTRY_UAE = 784,
+	CTRY_UKRAINE = 804,
+	CTRY_UNITED_KINGDOM = 826,
+	CTRY_UNITED_STATES = 840,
+	CTRY_UNITED_STATES_FCC49 = 842,
+	CTRY_URUGUAY = 858,
+	CTRY_UZBEKISTAN = 860,
+	CTRY_VENEZUELA = 862,
+	CTRY_VIET_NAM = 704,
+	CTRY_YEMEN = 887,
+	CTRY_ZIMBABWE = 716,
+	CTRY_JAPAN1 = 393,
+	CTRY_JAPAN2 = 394,
+	CTRY_JAPAN3 = 395,
+	CTRY_JAPAN4 = 396,
+	CTRY_JAPAN5 = 397,
+	CTRY_JAPAN6 = 4006,
+	CTRY_JAPAN7 = 4007,
+	CTRY_JAPAN8 = 4008,
+	CTRY_JAPAN9 = 4009,
+	CTRY_JAPAN10 = 4010,
+	CTRY_JAPAN11 = 4011,
+	CTRY_JAPAN12 = 4012,
+	CTRY_JAPAN13 = 4013,
+	CTRY_JAPAN14 = 4014,
+	CTRY_JAPAN15 = 4015,
+	CTRY_JAPAN16 = 4016,
+	CTRY_JAPAN17 = 4017,
+	CTRY_JAPAN18 = 4018,
+	CTRY_JAPAN19 = 4019,
+	CTRY_JAPAN20 = 4020,
+	CTRY_JAPAN21 = 4021,
+	CTRY_JAPAN22 = 4022,
+	CTRY_JAPAN23 = 4023,
+	CTRY_JAPAN24 = 4024,
+	CTRY_JAPAN25 = 4025,
+	CTRY_JAPAN26 = 4026,
+	CTRY_JAPAN27 = 4027,
+	CTRY_JAPAN28 = 4028,
+	CTRY_JAPAN29 = 4029,
+	CTRY_JAPAN30 = 4030,
+	CTRY_JAPAN31 = 4031,
+	CTRY_JAPAN32 = 4032,
+	CTRY_JAPAN33 = 4033,
+	CTRY_JAPAN34 = 4034,
+	CTRY_JAPAN35 = 4035,
+	CTRY_JAPAN36 = 4036,
+	CTRY_JAPAN37 = 4037,
+	CTRY_JAPAN38 = 4038,
+	CTRY_JAPAN39 = 4039,
+	CTRY_JAPAN40 = 4040,
+	CTRY_JAPAN41 = 4041,
+	CTRY_JAPAN42 = 4042,
+	CTRY_JAPAN43 = 4043,
+	CTRY_JAPAN44 = 4044,
+	CTRY_JAPAN45 = 4045,
+	CTRY_JAPAN46 = 4046,
+	CTRY_JAPAN47 = 4047,
+	CTRY_JAPAN48 = 4048,
+	CTRY_JAPAN49 = 4049,
+	CTRY_JAPAN50 = 4050,
+	CTRY_JAPAN51 = 4051,
+	CTRY_JAPAN52 = 4052,
+	CTRY_JAPAN53 = 4053,
+	CTRY_JAPAN54 = 4054,
+	CTRY_JAPAN55 = 4055,
+	CTRY_JAPAN56 = 4056,
+	CTRY_JAPAN57 = 4057,
+	CTRY_JAPAN58 = 4058,
+	CTRY_JAPAN59 = 4059,
+	CTRY_AUSTRALIA2 = 5000,
+	CTRY_CANADA2 = 5001,
+	CTRY_BELGIUM2 = 5002
+};
+
+void ath9k_regd_get_current_country(struct ath_hal *ah,
+				    struct ath9k_country_entry *ctry);
+
+#endif
diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h
new file mode 100644
index 00000000000..9112c030b1e
--- /dev/null
+++ b/drivers/net/wireless/ath9k/regd_common.h
@@ -0,0 +1,1915 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef REGD_COMMON_H
+#define REGD_COMMON_H
+
+enum EnumRd {
+	NO_ENUMRD = 0x00,
+	NULL1_WORLD = 0x03,
+	NULL1_ETSIB = 0x07,
+	NULL1_ETSIC = 0x08,
+	FCC1_FCCA = 0x10,
+	FCC1_WORLD = 0x11,
+	FCC4_FCCA = 0x12,
+	FCC5_FCCA = 0x13,
+	FCC6_FCCA = 0x14,
+
+	FCC2_FCCA = 0x20,
+	FCC2_WORLD = 0x21,
+	FCC2_ETSIC = 0x22,
+	FCC6_WORLD = 0x23,
+	FRANCE_RES = 0x31,
+	FCC3_FCCA = 0x3A,
+	FCC3_WORLD = 0x3B,
+
+	ETSI1_WORLD = 0x37,
+	ETSI3_ETSIA = 0x32,
+	ETSI2_WORLD = 0x35,
+	ETSI3_WORLD = 0x36,
+	ETSI4_WORLD = 0x30,
+	ETSI4_ETSIC = 0x38,
+	ETSI5_WORLD = 0x39,
+	ETSI6_WORLD = 0x34,
+	ETSI_RESERVED = 0x33,
+
+	MKK1_MKKA = 0x40,
+	MKK1_MKKB = 0x41,
+	APL4_WORLD = 0x42,
+	MKK2_MKKA = 0x43,
+	APL_RESERVED = 0x44,
+	APL2_WORLD = 0x45,
+	APL2_APLC = 0x46,
+	APL3_WORLD = 0x47,
+	MKK1_FCCA = 0x48,
+	APL2_APLD = 0x49,
+	MKK1_MKKA1 = 0x4A,
+	MKK1_MKKA2 = 0x4B,
+	MKK1_MKKC = 0x4C,
+
+	APL3_FCCA = 0x50,
+	APL1_WORLD = 0x52,
+	APL1_FCCA = 0x53,
+	APL1_APLA = 0x54,
+	APL1_ETSIC = 0x55,
+	APL2_ETSIC = 0x56,
+	APL5_WORLD = 0x58,
+	APL6_WORLD = 0x5B,
+	APL7_FCCA = 0x5C,
+	APL8_WORLD = 0x5D,
+	APL9_WORLD = 0x5E,
+
+	WOR0_WORLD = 0x60,
+	WOR1_WORLD = 0x61,
+	WOR2_WORLD = 0x62,
+	WOR3_WORLD = 0x63,
+	WOR4_WORLD = 0x64,
+	WOR5_ETSIC = 0x65,
+
+	WOR01_WORLD = 0x66,
+	WOR02_WORLD = 0x67,
+	EU1_WORLD = 0x68,
+
+	WOR9_WORLD = 0x69,
+	WORA_WORLD = 0x6A,
+	WORB_WORLD = 0x6B,
+
+	MKK3_MKKB = 0x80,
+	MKK3_MKKA2 = 0x81,
+	MKK3_MKKC = 0x82,
+
+	MKK4_MKKB = 0x83,
+	MKK4_MKKA2 = 0x84,
+	MKK4_MKKC = 0x85,
+
+	MKK5_MKKB = 0x86,
+	MKK5_MKKA2 = 0x87,
+	MKK5_MKKC = 0x88,
+
+	MKK6_MKKB = 0x89,
+	MKK6_MKKA2 = 0x8A,
+	MKK6_MKKC = 0x8B,
+
+	MKK7_MKKB = 0x8C,
+	MKK7_MKKA2 = 0x8D,
+	MKK7_MKKC = 0x8E,
+
+	MKK8_MKKB = 0x8F,
+	MKK8_MKKA2 = 0x90,
+	MKK8_MKKC = 0x91,
+
+	MKK14_MKKA1 = 0x92,
+	MKK15_MKKA1 = 0x93,
+
+	MKK10_FCCA = 0xD0,
+	MKK10_MKKA1 = 0xD1,
+	MKK10_MKKC = 0xD2,
+	MKK10_MKKA2 = 0xD3,
+
+	MKK11_MKKA = 0xD4,
+	MKK11_FCCA = 0xD5,
+	MKK11_MKKA1 = 0xD6,
+	MKK11_MKKC = 0xD7,
+	MKK11_MKKA2 = 0xD8,
+
+	MKK12_MKKA = 0xD9,
+	MKK12_FCCA = 0xDA,
+	MKK12_MKKA1 = 0xDB,
+	MKK12_MKKC = 0xDC,
+	MKK12_MKKA2 = 0xDD,
+
+	MKK13_MKKB = 0xDE,
+
+	MKK3_MKKA = 0xF0,
+	MKK3_MKKA1 = 0xF1,
+	MKK3_FCCA = 0xF2,
+	MKK4_MKKA = 0xF3,
+	MKK4_MKKA1 = 0xF4,
+	MKK4_FCCA = 0xF5,
+	MKK9_MKKA = 0xF6,
+	MKK10_MKKA = 0xF7,
+	MKK6_MKKA1 = 0xF8,
+	MKK6_FCCA = 0xF9,
+	MKK7_MKKA1 = 0xFA,
+	MKK7_FCCA = 0xFB,
+	MKK9_FCCA = 0xFC,
+	MKK9_MKKA1 = 0xFD,
+	MKK9_MKKC = 0xFE,
+	MKK9_MKKA2 = 0xFF,
+
+	APL1 = 0x0150,
+	APL2 = 0x0250,
+	APL3 = 0x0350,
+	APL4 = 0x0450,
+	APL5 = 0x0550,
+	APL6 = 0x0650,
+	APL7 = 0x0750,
+	APL8 = 0x0850,
+	APL9 = 0x0950,
+	APL10 = 0x1050,
+
+	ETSI1 = 0x0130,
+	ETSI2 = 0x0230,
+	ETSI3 = 0x0330,
+	ETSI4 = 0x0430,
+	ETSI5 = 0x0530,
+	ETSI6 = 0x0630,
+	ETSIA = 0x0A30,
+	ETSIB = 0x0B30,
+	ETSIC = 0x0C30,
+
+	FCC1 = 0x0110,
+	FCC2 = 0x0120,
+	FCC3 = 0x0160,
+	FCC4 = 0x0165,
+	FCC5 = 0x0510,
+	FCC6 = 0x0610,
+	FCCA = 0x0A10,
+
+	APLD = 0x0D50,
+
+	MKK1 = 0x0140,
+	MKK2 = 0x0240,
+	MKK3 = 0x0340,
+	MKK4 = 0x0440,
+	MKK5 = 0x0540,
+	MKK6 = 0x0640,
+	MKK7 = 0x0740,
+	MKK8 = 0x0840,
+	MKK9 = 0x0940,
+	MKK10 = 0x0B40,
+	MKK11 = 0x1140,
+	MKK12 = 0x1240,
+	MKK13 = 0x0C40,
+	MKK14 = 0x1440,
+	MKK15 = 0x1540,
+	MKKA = 0x0A40,
+	MKKC = 0x0A50,
+
+	NULL1 = 0x0198,
+	WORLD = 0x0199,
+	DEBUG_REG_DMN = 0x01ff,
+};
+
+enum {
+	FCC = 0x10,
+	MKK = 0x40,
+	ETSI = 0x30,
+};
+
+enum {
+	NO_REQ = 0x00000000,
+	DISALLOW_ADHOC_11A = 0x00000001,
+	DISALLOW_ADHOC_11A_TURB = 0x00000002,
+	NEED_NFC = 0x00000004,
+
+	ADHOC_PER_11D = 0x00000008,
+	ADHOC_NO_11A = 0x00000010,
+
+	PUBLIC_SAFETY_DOMAIN = 0x00000020,
+	LIMIT_FRAME_4MS = 0x00000040,
+
+	NO_HOSTAP = 0x00000080,
+
+	REQ_MASK = 0x000000FF,
+};
+
+#define REG_DOMAIN_2GHZ_MASK    (REQ_MASK & \
+	(!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
+#define REG_DOMAIN_5GHZ_MASK    REQ_MASK
+
+static struct reg_dmn_pair_mapping regDomainPairs[] = {
+	{NO_ENUMRD, DEBUG_REG_DMN, DEBUG_REG_DMN, NO_REQ, NO_REQ,
+	 PSCAN_DEFER, 0},
+	{NULL1_WORLD, NULL1, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{NULL1_ETSIB, NULL1, ETSIB, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{NULL1_ETSIC, NULL1, ETSIC, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+
+	{FCC2_FCCA, FCC2, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC2_WORLD, FCC2, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC2_ETSIC, FCC2, ETSIC, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC3_FCCA, FCC3, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC3_WORLD, FCC3, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC4_FCCA, FCC4, FCCA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{FCC5_FCCA, FCC5, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC6_FCCA, FCC6, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC6_WORLD, FCC6, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+
+	{ETSI1_WORLD, ETSI1, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{ETSI2_WORLD, ETSI2, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{ETSI3_WORLD, ETSI3, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{ETSI4_WORLD, ETSI4, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{ETSI5_WORLD, ETSI5, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{ETSI6_WORLD, ETSI6, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+
+	{ETSI3_ETSIA, ETSI3, WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{FRANCE_RES, ETSI3, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+
+	{FCC1_WORLD, FCC1, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{FCC1_FCCA, FCC1, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL1_WORLD, APL1, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL2_WORLD, APL2, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL3_WORLD, APL3, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL4_WORLD, APL4, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL5_WORLD, APL5, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL6_WORLD, APL6, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL8_WORLD, APL8, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL9_WORLD, APL9, WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+
+	{APL3_FCCA, APL3, FCCA, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL1_ETSIC, APL1, ETSIC, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL2_ETSIC, APL2, ETSIC, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{APL2_APLD, APL2, APLD, NO_REQ, NO_REQ, PSCAN_DEFER,},
+
+	{MKK1_MKKA, MKK1, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA, CTRY_JAPAN},
+	{MKK1_MKKB, MKK1, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKK1 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN1},
+	{MKK1_FCCA, MKK1, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1, CTRY_JAPAN2},
+	{MKK1_MKKA1, MKK1, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN4},
+	{MKK1_MKKA2, MKK1, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN5},
+	{MKK1_MKKC, MKK1, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1, CTRY_JAPAN6},
+
+	{MKK2_MKKA, MKK2, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKK2 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN3},
+
+	{MKK3_MKKA, MKK3, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA, CTRY_JAPAN25},
+	{MKK3_MKKB, MKK3, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN7},
+	{MKK3_MKKA1, MKK3, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN26},
+	{MKK3_MKKA2, MKK3, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN8},
+	{MKK3_MKKC, MKK3, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN9},
+	{MKK3_FCCA, MKK3, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN27},
+
+	{MKK4_MKKA, MKK4, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN36},
+	{MKK4_MKKB, MKK4, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN10},
+	{MKK4_MKKA1, MKK4, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN28},
+	{MKK4_MKKA2, MKK4, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN11},
+	{MKK4_MKKC, MKK4, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN12},
+	{MKK4_FCCA, MKK4, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN29},
+
+	{MKK5_MKKB, MKK5, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN13},
+	{MKK5_MKKA2, MKK5, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN14},
+	{MKK5_MKKC, MKK5, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN15},
+
+	{MKK6_MKKB, MKK6, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA | PSCAN_MKKA_G, CTRY_JAPAN16},
+	{MKK6_MKKA1, MKK6, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN30},
+	{MKK6_MKKA2, MKK6, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN17},
+	{MKK6_MKKC, MKK6, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1, CTRY_JAPAN18},
+	{MKK6_FCCA, MKK6, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN31},
+
+	{MKK7_MKKB, MKK7, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN19},
+	{MKK7_MKKA1, MKK7, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN32},
+	{MKK7_MKKA2, MKK7, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G,
+	 CTRY_JAPAN20},
+	{MKK7_MKKC, MKK7, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN21},
+	{MKK7_FCCA, MKK7, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN33},
+
+	{MKK8_MKKB, MKK8, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN22},
+	{MKK8_MKKA2, MKK8, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G,
+	 CTRY_JAPAN23},
+	{MKK8_MKKC, MKK8, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN24},
+
+	{MKK9_MKKA, MKK9, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK2 | PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN34},
+	{MKK9_FCCA, MKK9, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN37},
+	{MKK9_MKKA1, MKK9, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN38},
+	{MKK9_MKKA2, MKK9, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN40},
+	{MKK9_MKKC, MKK9, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN39},
+
+	{MKK10_MKKA, MKK10, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC, PSCAN_MKK2 | PSCAN_MKK3, CTRY_JAPAN35},
+	{MKK10_FCCA, MKK10, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN41},
+	{MKK10_MKKA1, MKK10, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN42},
+	{MKK10_MKKA2, MKK10, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN44},
+	{MKK10_MKKC, MKK10, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 NO_PSCAN, CTRY_JAPAN43},
+
+	{MKK11_MKKA, MKK11, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN45},
+	{MKK11_FCCA, MKK11, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN46},
+	{MKK11_MKKA1, MKK11, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN47},
+	{MKK11_MKKA2, MKK11, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G, CTRY_JAPAN49},
+	{MKK11_MKKC, MKK11, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK3, CTRY_JAPAN48},
+
+	{MKK12_MKKA, MKK12, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN50},
+	{MKK12_FCCA, MKK12, FCCA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN51},
+	{MKK12_MKKA1, MKK12, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA1 | PSCAN_MKKA1_G,
+	 CTRY_JAPAN52},
+	{MKK12_MKKA2, MKK12, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA2 | PSCAN_MKKA2_G,
+	 CTRY_JAPAN54},
+	{MKK12_MKKC, MKK12, MKKC,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3, CTRY_JAPAN53},
+
+	{MKK13_MKKB, MKK13, MKKA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB | NEED_NFC |
+	 LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKK3 | PSCAN_MKKA | PSCAN_MKKA_G,
+	 CTRY_JAPAN57},
+
+	{MKK14_MKKA1, MKK14, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN58},
+	{MKK15_MKKA1, MKK15, MKKA,
+	 DISALLOW_ADHOC_11A_TURB | NEED_NFC | LIMIT_FRAME_4MS, NEED_NFC,
+	 PSCAN_MKK1 | PSCAN_MKKA1 | PSCAN_MKKA1_G, CTRY_JAPAN59},
+
+	{WOR0_WORLD, WOR0_WORLD, WOR0_WORLD, NO_REQ, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WOR1_WORLD, WOR1_WORLD, WOR1_WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WOR2_WORLD, WOR2_WORLD, WOR2_WORLD, DISALLOW_ADHOC_11A_TURB,
+	 NO_REQ, PSCAN_DEFER, 0},
+	{WOR3_WORLD, WOR3_WORLD, WOR3_WORLD, NO_REQ, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WOR4_WORLD, WOR4_WORLD, WOR4_WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WOR5_ETSIC, WOR5_ETSIC, WOR5_ETSIC,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WOR01_WORLD, WOR01_WORLD, WOR01_WORLD, NO_REQ, NO_REQ,
+	 PSCAN_DEFER, 0},
+	{WOR02_WORLD, WOR02_WORLD, WOR02_WORLD, NO_REQ, NO_REQ,
+	 PSCAN_DEFER, 0},
+	{EU1_WORLD, EU1_WORLD, EU1_WORLD, NO_REQ, NO_REQ, PSCAN_DEFER, 0},
+	{WOR9_WORLD, WOR9_WORLD, WOR9_WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WORA_WORLD, WORA_WORLD, WORA_WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+	{WORB_WORLD, WORB_WORLD, WORB_WORLD,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB, NO_REQ, PSCAN_DEFER,
+	 0},
+};
+
+#define	NO_INTERSECT_REQ	0xFFFFFFFF
+#define	NO_UNION_REQ		0
+
+static struct country_code_to_enum_rd allCountries[] = {
+	{CTRY_DEBUG, NO_ENUMRD, "DB", "DEBUG", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_DEFAULT, DEF_REGDMN, "NA", "NO_COUNTRY_SET", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_ALBANIA, NULL1_WORLD, "AL", "ALBANIA", YES, NO, YES, YES, NO,
+	 NO, NO, 7000},
+	{CTRY_ALGERIA, NULL1_WORLD, "DZ", "ALGERIA", YES, NO, YES, YES, NO,
+	 NO, NO, 7000},
+	{CTRY_ARGENTINA, APL3_WORLD, "AR", "ARGENTINA", YES, NO, NO, YES,
+	 NO, YES, NO, 7000},
+	{CTRY_ARMENIA, ETSI4_WORLD, "AM", "ARMENIA", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_AUSTRALIA, FCC2_WORLD, "AU", "AUSTRALIA", YES, YES, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_AUSTRALIA2, FCC6_WORLD, "AU", "AUSTRALIA2", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_AUSTRIA, ETSI1_WORLD, "AT", "AUSTRIA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_AZERBAIJAN, ETSI4_WORLD, "AZ", "AZERBAIJAN", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_BAHRAIN, APL6_WORLD, "BH", "BAHRAIN", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_BELARUS, ETSI1_WORLD, "BY", "BELARUS", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_BELGIUM, ETSI1_WORLD, "BE", "BELGIUM", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_BELGIUM2, ETSI4_WORLD, "BL", "BELGIUM", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_BELIZE, APL1_ETSIC, "BZ", "BELIZE", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_BOLIVIA, APL1_ETSIC, "BO", "BOLVIA", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_BOSNIA_HERZ, ETSI1_WORLD, "BA", "BOSNIA_HERZGOWINA", YES, NO,
+	 YES, YES, YES, YES, NO, 7000},
+	{CTRY_BRAZIL, FCC3_WORLD, "BR", "BRAZIL", YES, NO, NO, YES, NO,
+	 YES, NO, 7000},
+	{CTRY_BRUNEI_DARUSSALAM, APL1_WORLD, "BN", "BRUNEI DARUSSALAM",
+	 YES, YES, YES, YES, YES, YES, YES, 7000},
+	{CTRY_BULGARIA, ETSI6_WORLD, "BG", "BULGARIA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_CANADA, FCC2_FCCA, "CA", "CANADA", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_CANADA2, FCC6_FCCA, "CA", "CANADA2", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_CHILE, APL6_WORLD, "CL", "CHILE", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_CHINA, APL1_WORLD, "CN", "CHINA", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_COLOMBIA, FCC1_FCCA, "CO", "COLOMBIA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_COSTA_RICA, FCC1_WORLD, "CR", "COSTA RICA", YES, NO, YES,
+	 YES, YES, YES, NO, 7000},
+	{CTRY_CROATIA, ETSI3_WORLD, "HR", "CROATIA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_CYPRUS, ETSI1_WORLD, "CY", "CYPRUS", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_CZECH, ETSI3_WORLD, "CZ", "CZECH REPUBLIC", YES, NO, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_DENMARK, ETSI1_WORLD, "DK", "DENMARK", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_DOMINICAN_REPUBLIC, FCC1_FCCA, "DO", "DOMINICAN REPUBLIC",
+	 YES, YES, YES, YES, YES, YES, YES, 7000},
+	{CTRY_ECUADOR, FCC1_WORLD, "EC", "ECUADOR", YES, NO, NO, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_EGYPT, ETSI3_WORLD, "EG", "EGYPT", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_EL_SALVADOR, FCC1_WORLD, "SV", "EL SALVADOR", YES, NO, YES,
+	 YES, YES, YES, NO, 7000},
+	{CTRY_ESTONIA, ETSI1_WORLD, "EE", "ESTONIA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_FINLAND, ETSI1_WORLD, "FI", "FINLAND", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_FRANCE, ETSI1_WORLD, "FR", "FRANCE", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_GEORGIA, ETSI4_WORLD, "GE", "GEORGIA", YES, YES, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_GERMANY, ETSI1_WORLD, "DE", "GERMANY", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_GREECE, ETSI1_WORLD, "GR", "GREECE", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_GUATEMALA, FCC1_FCCA, "GT", "GUATEMALA", YES, YES, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_HONDURAS, NULL1_WORLD, "HN", "HONDURAS", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_HONG_KONG, FCC2_WORLD, "HK", "HONG KONG", YES, YES, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_HUNGARY, ETSI1_WORLD, "HU", "HUNGARY", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_ICELAND, ETSI1_WORLD, "IS", "ICELAND", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_INDIA, APL6_WORLD, "IN", "INDIA", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_INDONESIA, APL1_WORLD, "ID", "INDONESIA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_IRAN, APL1_WORLD, "IR", "IRAN", YES, YES, YES, YES, YES, YES,
+	 YES, 7000},
+	{CTRY_IRELAND, ETSI1_WORLD, "IE", "IRELAND", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_ISRAEL, NULL1_WORLD, "IL", "ISRAEL", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_ITALY, ETSI1_WORLD, "IT", "ITALY", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAMAICA, ETSI1_WORLD, "JM", "JAMAICA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+
+	{CTRY_JAPAN, MKK1_MKKA, "JP", "JAPAN", YES, NO, NO, YES, YES, YES,
+	 YES, 7000},
+	{CTRY_JAPAN1, MKK1_MKKB, "JP", "JAPAN1", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN2, MKK1_FCCA, "JP", "JAPAN2", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN3, MKK2_MKKA, "JP", "JAPAN3", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN4, MKK1_MKKA1, "JP", "JAPAN4", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN5, MKK1_MKKA2, "JP", "JAPAN5", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN6, MKK1_MKKC, "JP", "JAPAN6", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN7, MKK3_MKKB, "JP", "JAPAN7", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN8, MKK3_MKKA2, "JP", "JAPAN8", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN9, MKK3_MKKC, "JP", "JAPAN9", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN10, MKK4_MKKB, "JP", "JAPAN10", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN11, MKK4_MKKA2, "JP", "JAPAN11", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN12, MKK4_MKKC, "JP", "JAPAN12", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN13, MKK5_MKKB, "JP", "JAPAN13", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN14, MKK5_MKKA2, "JP", "JAPAN14", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN15, MKK5_MKKC, "JP", "JAPAN15", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN16, MKK6_MKKB, "JP", "JAPAN16", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN17, MKK6_MKKA2, "JP", "JAPAN17", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN18, MKK6_MKKC, "JP", "JAPAN18", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN19, MKK7_MKKB, "JP", "JAPAN19", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN20, MKK7_MKKA2, "JP", "JAPAN20", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN21, MKK7_MKKC, "JP", "JAPAN21", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN22, MKK8_MKKB, "JP", "JAPAN22", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN23, MKK8_MKKA2, "JP", "JAPAN23", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN24, MKK8_MKKC, "JP", "JAPAN24", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN25, MKK3_MKKA, "JP", "JAPAN25", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN26, MKK3_MKKA1, "JP", "JAPAN26", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN27, MKK3_FCCA, "JP", "JAPAN27", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN28, MKK4_MKKA1, "JP", "JAPAN28", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN29, MKK4_FCCA, "JP", "JAPAN29", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN30, MKK6_MKKA1, "JP", "JAPAN30", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN31, MKK6_FCCA, "JP", "JAPAN31", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN32, MKK7_MKKA1, "JP", "JAPAN32", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN33, MKK7_FCCA, "JP", "JAPAN33", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN34, MKK9_MKKA, "JP", "JAPAN34", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN35, MKK10_MKKA, "JP", "JAPAN35", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN36, MKK4_MKKA, "JP", "JAPAN36", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN37, MKK9_FCCA, "JP", "JAPAN37", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN38, MKK9_MKKA1, "JP", "JAPAN38", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN39, MKK9_MKKC, "JP", "JAPAN39", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN40, MKK9_MKKA2, "JP", "JAPAN40", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN41, MKK10_FCCA, "JP", "JAPAN41", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN42, MKK10_MKKA1, "JP", "JAPAN42", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN43, MKK10_MKKC, "JP", "JAPAN43", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN44, MKK10_MKKA2, "JP", "JAPAN44", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN45, MKK11_MKKA, "JP", "JAPAN45", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN46, MKK11_FCCA, "JP", "JAPAN46", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN47, MKK11_MKKA1, "JP", "JAPAN47", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN48, MKK11_MKKC, "JP", "JAPAN48", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN49, MKK11_MKKA2, "JP", "JAPAN49", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN50, MKK12_MKKA, "JP", "JAPAN50", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN51, MKK12_FCCA, "JP", "JAPAN51", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN52, MKK12_MKKA1, "JP", "JAPAN52", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN53, MKK12_MKKC, "JP", "JAPAN53", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN54, MKK12_MKKA2, "JP", "JAPAN54", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JAPAN57, MKK13_MKKB, "JP", "JAPAN57", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN58, MKK14_MKKA1, "JP", "JAPAN58", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_JAPAN59, MKK15_MKKA1, "JP", "JAPAN59", YES, NO, NO, YES, YES,
+	 YES, YES, 7000},
+
+	{CTRY_JORDAN, ETSI2_WORLD, "JO", "JORDAN", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_KAZAKHSTAN, NULL1_WORLD, "KZ", "KAZAKHSTAN", YES, NO, YES,
+	 YES, YES, NO, NO, 7000},
+	{CTRY_KOREA_NORTH, APL9_WORLD, "KP", "NORTH KOREA", YES, NO, NO,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_KOREA_ROC, APL9_WORLD, "KR", "KOREA REPUBLIC", YES, NO, NO,
+	 YES, NO, YES, NO, 7000},
+	{CTRY_KOREA_ROC2, APL2_WORLD, "K2", "KOREA REPUBLIC2", YES, NO, NO,
+	 YES, NO, YES, NO, 7000},
+	{CTRY_KOREA_ROC3, APL9_WORLD, "K3", "KOREA REPUBLIC3", YES, NO, NO,
+	 YES, NO, YES, NO, 7000},
+	{CTRY_KUWAIT, NULL1_WORLD, "KW", "KUWAIT", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_LATVIA, ETSI1_WORLD, "LV", "LATVIA", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_LEBANON, NULL1_WORLD, "LB", "LEBANON", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_LIECHTENSTEIN, ETSI1_WORLD, "LI", "LIECHTENSTEIN", YES, NO,
+	 YES, YES, YES, YES, YES, 7000},
+	{CTRY_LITHUANIA, ETSI1_WORLD, "LT", "LITHUANIA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_LUXEMBOURG, ETSI1_WORLD, "LU", "LUXEMBOURG", YES, NO, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_MACAU, FCC2_WORLD, "MO", "MACAU", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_MACEDONIA, NULL1_WORLD, "MK", "MACEDONIA", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_MALAYSIA, APL8_WORLD, "MY", "MALAYSIA", YES, NO, NO, YES, NO,
+	 YES, NO, 7000},
+	{CTRY_MALTA, ETSI1_WORLD, "MT", "MALTA", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_MEXICO, FCC1_FCCA, "MX", "MEXICO", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_MONACO, ETSI4_WORLD, "MC", "MONACO", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_MOROCCO, NULL1_WORLD, "MA", "MOROCCO", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_NEPAL, APL1_WORLD, "NP", "NEPAL", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_NETHERLANDS, ETSI1_WORLD, "NL", "NETHERLANDS", YES, NO, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_NETHERLANDS_ANTILLES, ETSI1_WORLD, "AN",
+	 "NETHERLANDS-ANTILLES", YES, NO, YES, YES, YES, YES, YES, 7000},
+	{CTRY_NEW_ZEALAND, FCC2_ETSIC, "NZ", "NEW ZEALAND", YES, NO, YES,
+	 YES, YES, YES, NO, 7000},
+	{CTRY_NORWAY, ETSI1_WORLD, "NO", "NORWAY", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_OMAN, APL6_WORLD, "OM", "OMAN", YES, NO, YES, YES, YES, YES,
+	 NO, 7000},
+	{CTRY_PAKISTAN, NULL1_WORLD, "PK", "PAKISTAN", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_PANAMA, FCC1_FCCA, "PA", "PANAMA", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_PAPUA_NEW_GUINEA, FCC1_WORLD, "PG", "PAPUA NEW GUINEA", YES,
+	 YES, YES, YES, YES, YES, YES, 7000},
+	{CTRY_PERU, APL1_WORLD, "PE", "PERU", YES, NO, YES, YES, YES, YES,
+	 NO, 7000},
+	{CTRY_PHILIPPINES, APL1_WORLD, "PH", "PHILIPPINES", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_POLAND, ETSI1_WORLD, "PL", "POLAND", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_PORTUGAL, ETSI1_WORLD, "PT", "PORTUGAL", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_PUERTO_RICO, FCC1_FCCA, "PR", "PUERTO RICO", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_QATAR, NULL1_WORLD, "QA", "QATAR", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_ROMANIA, NULL1_WORLD, "RO", "ROMANIA", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_RUSSIA, NULL1_WORLD, "RU", "RUSSIA", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_SAUDI_ARABIA, NULL1_WORLD, "SA", "SAUDI ARABIA", YES, NO,
+	 YES, YES, YES, NO, NO, 7000},
+	{CTRY_SERBIA_MONTENEGRO, ETSI1_WORLD, "CS", "SERBIA & MONTENEGRO",
+	 YES, NO, YES, YES, YES, YES, YES, 7000},
+	{CTRY_SINGAPORE, APL6_WORLD, "SG", "SINGAPORE", YES, YES, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_SLOVAKIA, ETSI1_WORLD, "SK", "SLOVAK REPUBLIC", YES, NO, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_SLOVENIA, ETSI1_WORLD, "SI", "SLOVENIA", YES, NO, YES, YES,
+	 YES, YES, YES, 7000},
+	{CTRY_SOUTH_AFRICA, FCC3_WORLD, "ZA", "SOUTH AFRICA", YES, NO, YES,
+	 YES, YES, YES, NO, 7000},
+	{CTRY_SPAIN, ETSI1_WORLD, "ES", "SPAIN", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_SRI_LANKA, FCC3_WORLD, "LK", "SRI LANKA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_SWEDEN, ETSI1_WORLD, "SE", "SWEDEN", YES, NO, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_SWITZERLAND, ETSI1_WORLD, "CH", "SWITZERLAND", YES, NO, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_SYRIA, NULL1_WORLD, "SY", "SYRIA", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_TAIWAN, APL3_FCCA, "TW", "TAIWAN", YES, YES, YES, YES, YES,
+	 YES, YES, 7000},
+	{CTRY_THAILAND, NULL1_WORLD, "TH", "THAILAND", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_TRINIDAD_Y_TOBAGO, ETSI4_WORLD, "TT", "TRINIDAD & TOBAGO",
+	 YES, NO, YES, YES, YES, YES, NO, 7000},
+	{CTRY_TUNISIA, ETSI3_WORLD, "TN", "TUNISIA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_TURKEY, ETSI3_WORLD, "TR", "TURKEY", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_UKRAINE, NULL1_WORLD, "UA", "UKRAINE", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_UAE, NULL1_WORLD, "AE", "UNITED ARAB EMIRATES", YES, NO, YES,
+	 YES, YES, NO, NO, 7000},
+	{CTRY_UNITED_KINGDOM, ETSI1_WORLD, "GB", "UNITED KINGDOM", YES, NO,
+	 YES, YES, YES, YES, YES, 7000},
+	{CTRY_UNITED_STATES, FCC3_FCCA, "US", "UNITED STATES", YES, YES,
+	 YES, YES, YES, YES, YES, 5825},
+	{CTRY_UNITED_STATES_FCC49, FCC4_FCCA, "PS",
+	 "UNITED STATES (PUBLIC SAFETY)", YES, YES, YES, YES, YES, YES,
+	 YES, 7000},
+	{CTRY_URUGUAY, APL2_WORLD, "UY", "URUGUAY", YES, NO, YES, YES, YES,
+	 YES, NO, 7000},
+	{CTRY_UZBEKISTAN, FCC3_FCCA, "UZ", "UZBEKISTAN", YES, YES, YES,
+	 YES, YES, YES, YES, 7000},
+	{CTRY_VENEZUELA, APL2_ETSIC, "VE", "VENEZUELA", YES, NO, YES, YES,
+	 YES, YES, NO, 7000},
+	{CTRY_VIET_NAM, NULL1_WORLD, "VN", "VIET NAM", YES, NO, YES, YES,
+	 YES, NO, NO, 7000},
+	{CTRY_YEMEN, NULL1_WORLD, "YE", "YEMEN", YES, NO, YES, YES, YES,
+	 NO, NO, 7000},
+	{CTRY_ZIMBABWE, NULL1_WORLD, "ZW", "ZIMBABWE", YES, NO, YES, YES,
+	 YES, NO, NO, 7000}
+};
+
+enum {
+	NO_DFS = 0x0000000000000000ULL,
+	DFS_FCC3 = 0x0000000000000001ULL,
+	DFS_ETSI = 0x0000000000000002ULL,
+	DFS_MKK4 = 0x0000000000000004ULL,
+};
+
+enum {
+	F1_4915_4925,
+	F1_4935_4945,
+	F1_4920_4980,
+	F1_4942_4987,
+	F1_4945_4985,
+	F1_4950_4980,
+	F1_5035_5040,
+	F1_5040_5080,
+	F1_5055_5055,
+
+	F1_5120_5240,
+
+	F1_5170_5230,
+	F2_5170_5230,
+
+	F1_5180_5240,
+	F2_5180_5240,
+	F3_5180_5240,
+	F4_5180_5240,
+	F5_5180_5240,
+	F6_5180_5240,
+	F7_5180_5240,
+	F8_5180_5240,
+
+	F1_5180_5320,
+
+	F1_5240_5280,
+
+	F1_5260_5280,
+
+	F1_5260_5320,
+	F2_5260_5320,
+	F3_5260_5320,
+	F4_5260_5320,
+	F5_5260_5320,
+	F6_5260_5320,
+
+	F1_5260_5700,
+
+	F1_5280_5320,
+
+	F1_5500_5580,
+
+	F1_5500_5620,
+
+	F1_5500_5700,
+	F2_5500_5700,
+	F3_5500_5700,
+	F4_5500_5700,
+	F5_5500_5700,
+
+	F1_5660_5700,
+
+	F1_5745_5805,
+	F2_5745_5805,
+	F3_5745_5805,
+
+	F1_5745_5825,
+	F2_5745_5825,
+	F3_5745_5825,
+	F4_5745_5825,
+	F5_5745_5825,
+	F6_5745_5825,
+
+	W1_4920_4980,
+	W1_5040_5080,
+	W1_5170_5230,
+	W1_5180_5240,
+	W1_5260_5320,
+	W1_5745_5825,
+	W1_5500_5700,
+	A_DEMO_ALL_CHANNELS
+};
+
+static struct RegDmnFreqBand regDmn5GhzFreq[] = {
+	{4915, 4925, 23, 0, 10, 5, NO_DFS, PSCAN_MKK2, 16},
+	{4935, 4945, 23, 0, 10, 5, NO_DFS, PSCAN_MKK2, 16},
+	{4920, 4980, 23, 0, 20, 20, NO_DFS, PSCAN_MKK2, 7},
+	{4942, 4987, 27, 6, 5, 5, NO_DFS, PSCAN_FCC, 0},
+	{4945, 4985, 30, 6, 10, 5, NO_DFS, PSCAN_FCC, 0},
+	{4950, 4980, 33, 6, 20, 5, NO_DFS, PSCAN_FCC, 0},
+	{5035, 5040, 23, 0, 10, 5, NO_DFS, PSCAN_MKK2, 12},
+	{5040, 5080, 23, 0, 20, 20, NO_DFS, PSCAN_MKK2, 2},
+	{5055, 5055, 23, 0, 10, 5, NO_DFS, PSCAN_MKK2, 12},
+
+	{5120, 5240, 5, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+
+	{5170, 5230, 23, 0, 20, 20, NO_DFS, PSCAN_MKK1 | PSCAN_MKK2, 1},
+	{5170, 5230, 20, 0, 20, 20, NO_DFS, PSCAN_MKK1 | PSCAN_MKK2, 1},
+
+	{5180, 5240, 15, 0, 20, 20, NO_DFS, PSCAN_FCC | PSCAN_ETSI, 0},
+	{5180, 5240, 17, 6, 20, 20, NO_DFS, NO_PSCAN, 1},
+	{5180, 5240, 18, 0, 20, 20, NO_DFS, PSCAN_FCC | PSCAN_ETSI, 0},
+	{5180, 5240, 20, 0, 20, 20, NO_DFS, PSCAN_FCC | PSCAN_ETSI, 0},
+	{5180, 5240, 23, 0, 20, 20, NO_DFS, PSCAN_FCC | PSCAN_ETSI, 0},
+	{5180, 5240, 23, 6, 20, 20, NO_DFS, PSCAN_FCC, 0},
+	{5180, 5240, 20, 0, 20, 20, NO_DFS, PSCAN_MKK1 | PSCAN_MKK3, 0},
+	{5180, 5240, 23, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+
+	{5180, 5320, 20, 6, 20, 20, NO_DFS, PSCAN_ETSI, 0},
+
+	{5240, 5280, 23, 0, 20, 20, DFS_FCC3, PSCAN_FCC | PSCAN_ETSI, 0},
+
+	{5260, 5280, 23, 0, 20, 20, DFS_FCC3 | DFS_ETSI,
+	 PSCAN_FCC | PSCAN_ETSI, 0},
+
+	{5260, 5320, 18, 0, 20, 20, DFS_FCC3 | DFS_ETSI,
+	 PSCAN_FCC | PSCAN_ETSI, 0},
+
+	{5260, 5320, 20, 0, 20, 20, DFS_FCC3 | DFS_ETSI | DFS_MKK4,
+	 PSCAN_FCC | PSCAN_ETSI | PSCAN_MKK3, 0},
+
+
+	{5260, 5320, 20, 6, 20, 20, DFS_FCC3 | DFS_ETSI,
+	 PSCAN_FCC | PSCAN_ETSI, 2},
+	{5260, 5320, 23, 6, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_FCC, 2},
+	{5260, 5320, 23, 6, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_FCC, 0},
+	{5260, 5320, 30, 0, 20, 20, NO_DFS, NO_PSCAN, 0},
+
+	{5260, 5700, 5, 6, 20, 20, DFS_FCC3 | DFS_ETSI, NO_PSCAN, 0},
+
+	{5280, 5320, 17, 6, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_FCC, 0},
+
+	{5500, 5580, 23, 6, 20, 20, DFS_FCC3, PSCAN_FCC, 0},
+
+	{5500, 5620, 30, 6, 20, 20, DFS_ETSI, PSCAN_ETSI, 0},
+
+	{5500, 5700, 20, 6, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_FCC, 4},
+	{5500, 5700, 27, 0, 20, 20, DFS_FCC3 | DFS_ETSI,
+	 PSCAN_FCC | PSCAN_ETSI, 0},
+	{5500, 5700, 30, 0, 20, 20, DFS_FCC3 | DFS_ETSI,
+	 PSCAN_FCC | PSCAN_ETSI, 0},
+	{5500, 5700, 23, 0, 20, 20, DFS_FCC3 | DFS_ETSI | DFS_MKK4,
+	 PSCAN_MKK3 | PSCAN_FCC, 0},
+	{5500, 5700, 30, 6, 20, 20, DFS_ETSI, PSCAN_ETSI, 0},
+
+	{5660, 5700, 23, 6, 20, 20, DFS_FCC3, PSCAN_FCC, 0},
+
+	{5745, 5805, 23, 0, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5805, 30, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5805, 30, 6, 20, 20, NO_DFS, PSCAN_ETSI, 0},
+	{5745, 5825, 5, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5825, 17, 0, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5825, 20, 0, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5825, 30, 0, 20, 20, NO_DFS, NO_PSCAN, 0},
+	{5745, 5825, 30, 6, 20, 20, NO_DFS, NO_PSCAN, 3},
+	{5745, 5825, 30, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+
+
+	{4920, 4980, 30, 0, 20, 20, NO_DFS, PSCAN_WWR, 0},
+	{5040, 5080, 30, 0, 20, 20, NO_DFS, PSCAN_WWR, 0},
+	{5170, 5230, 30, 0, 20, 20, NO_DFS, PSCAN_WWR, 0},
+	{5180, 5240, 30, 0, 20, 20, NO_DFS, PSCAN_WWR, 0},
+	{5260, 5320, 30, 0, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, 0},
+	{5745, 5825, 30, 0, 20, 20, NO_DFS, PSCAN_WWR, 0},
+	{5500, 5700, 30, 0, 20, 20, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, 0},
+	{4920, 6100, 30, 6, 20, 20, NO_DFS, NO_PSCAN, 0},
+};
+
+enum {
+	T1_5130_5650,
+	T1_5150_5670,
+
+	T1_5200_5200,
+	T2_5200_5200,
+	T3_5200_5200,
+	T4_5200_5200,
+	T5_5200_5200,
+	T6_5200_5200,
+	T7_5200_5200,
+	T8_5200_5200,
+
+	T1_5200_5280,
+	T2_5200_5280,
+	T3_5200_5280,
+	T4_5200_5280,
+	T5_5200_5280,
+	T6_5200_5280,
+
+	T1_5200_5240,
+	T1_5210_5210,
+	T2_5210_5210,
+	T3_5210_5210,
+	T4_5210_5210,
+	T5_5210_5210,
+	T6_5210_5210,
+	T7_5210_5210,
+	T8_5210_5210,
+	T9_5210_5210,
+	T10_5210_5210,
+	T1_5240_5240,
+
+	T1_5210_5250,
+	T1_5210_5290,
+	T2_5210_5290,
+	T3_5210_5290,
+
+	T1_5280_5280,
+	T2_5280_5280,
+	T1_5290_5290,
+	T2_5290_5290,
+	T3_5290_5290,
+	T1_5250_5290,
+	T2_5250_5290,
+	T3_5250_5290,
+	T4_5250_5290,
+
+	T1_5540_5660,
+	T2_5540_5660,
+	T3_5540_5660,
+	T1_5760_5800,
+	T2_5760_5800,
+	T3_5760_5800,
+	T4_5760_5800,
+	T5_5760_5800,
+	T6_5760_5800,
+	T7_5760_5800,
+
+	T1_5765_5805,
+	T2_5765_5805,
+	T3_5765_5805,
+	T4_5765_5805,
+	T5_5765_5805,
+	T6_5765_5805,
+	T7_5765_5805,
+	T8_5765_5805,
+	T9_5765_5805,
+
+	WT1_5210_5250,
+	WT1_5290_5290,
+	WT1_5540_5660,
+	WT1_5760_5800,
+};
+
+enum {
+	F1_2312_2372,
+	F2_2312_2372,
+
+	F1_2412_2472,
+	F2_2412_2472,
+	F3_2412_2472,
+
+	F1_2412_2462,
+	F2_2412_2462,
+
+	F1_2432_2442,
+
+	F1_2457_2472,
+
+	F1_2467_2472,
+
+	F1_2484_2484,
+	F2_2484_2484,
+
+	F1_2512_2732,
+
+	W1_2312_2372,
+	W1_2412_2412,
+	W1_2417_2432,
+	W1_2437_2442,
+	W1_2447_2457,
+	W1_2462_2462,
+	W1_2467_2467,
+	W2_2467_2467,
+	W1_2472_2472,
+	W2_2472_2472,
+	W1_2484_2484,
+	W2_2484_2484,
+};
+
+static struct RegDmnFreqBand regDmn2GhzFreq[] = {
+	{2312, 2372, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2312, 2372, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2412, 2472, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA, 0},
+	{2412, 2472, 30, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2412, 2462, 27, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2462, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA, 0},
+
+	{2432, 2442, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2457, 2472, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2467, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA2 | PSCAN_MKKA, 0},
+
+	{2484, 2484, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2484, 2484, 20, 0, 20, 5, NO_DFS,
+	 PSCAN_MKKA | PSCAN_MKKA1 | PSCAN_MKKA2, 0},
+
+	{2512, 2732, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2312, 2372, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2412, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2417, 2432, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2437, 2442, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2447, 2457, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2462, 2462, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2467, 2467, 20, 0, 20, 5, NO_DFS, PSCAN_WWR | IS_ECM_CHAN, 0},
+	{2467, 2467, 20, 0, 20, 5, NO_DFS, NO_PSCAN | IS_ECM_CHAN, 0},
+	{2472, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_WWR | IS_ECM_CHAN, 0},
+	{2472, 2472, 20, 0, 20, 5, NO_DFS, NO_PSCAN | IS_ECM_CHAN, 0},
+	{2484, 2484, 20, 0, 20, 5, NO_DFS, PSCAN_WWR | IS_ECM_CHAN, 0},
+	{2484, 2484, 20, 0, 20, 5, NO_DFS, NO_PSCAN | IS_ECM_CHAN, 0},
+};
+
+enum {
+	G1_2312_2372,
+	G2_2312_2372,
+
+	G1_2412_2472,
+	G2_2412_2472,
+	G3_2412_2472,
+
+	G1_2412_2462,
+	G2_2412_2462,
+
+	G1_2432_2442,
+
+	G1_2457_2472,
+
+	G1_2512_2732,
+
+	G1_2467_2472,
+
+	WG1_2312_2372,
+	WG1_2412_2462,
+	WG1_2467_2472,
+	WG2_2467_2472,
+	G_DEMO_ALL_CHANNELS
+};
+
+static struct RegDmnFreqBand regDmn2Ghz11gFreq[] = {
+	{2312, 2372, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2312, 2372, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2412, 2472, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA_G, 0},
+	{2412, 2472, 30, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2412, 2462, 27, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2462, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA_G, 0},
+
+	{2432, 2442, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2457, 2472, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2512, 2732, 5, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+
+	{2467, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_MKKA2 | PSCAN_MKKA, 0},
+
+	{2312, 2372, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2412, 2462, 20, 0, 20, 5, NO_DFS, NO_PSCAN, 0},
+	{2467, 2472, 20, 0, 20, 5, NO_DFS, PSCAN_WWR | IS_ECM_CHAN, 0},
+	{2467, 2472, 20, 0, 20, 5, NO_DFS, NO_PSCAN | IS_ECM_CHAN, 0},
+	{2312, 2732, 27, 6, 20, 5, NO_DFS, NO_PSCAN, 0},
+};
+
+enum {
+	T1_2312_2372,
+	T1_2437_2437,
+	T2_2437_2437,
+	T3_2437_2437,
+	T1_2512_2732
+};
+
+static struct regDomain regDomains[] = {
+
+	{DEBUG_REG_DMN, FCC, DFS_FCC3, NO_PSCAN, NO_REQ,
+	 BM(A_DEMO_ALL_CHANNELS, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5130_5650, T1_5150_5670, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5200_5240, T1_5280_5280, T1_5540_5660, T1_5765_5805, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(F1_2312_2372, F1_2412_2472, F1_2484_2484, F1_2512_2732, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(G_DEMO_ALL_CHANNELS, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_2312_2372, T1_2437_2437, T1_2512_2732, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1)},
+
+	{APL1, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F4_5745_5825, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL2, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F1_5745_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL3, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F1_5280_5320, F2_5745_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5290_5290, T1_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL4, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F4_5180_5240, F3_5745_5825, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5210_5210, T3_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5200_5200, T3_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL5, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F2_5745_5825, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T4_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T4_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL6, ETSI, DFS_ETSI, PSCAN_FCC_T | PSCAN_FCC, NO_REQ,
+	 BM(F4_5180_5240, F2_5260_5320, F3_5745_5825, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T2_5210_5210, T1_5250_5290, T1_5760_5800, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T1_5200_5280, T5_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL7, ETSI, DFS_ETSI, PSCAN_ETSI, NO_REQ,
+	 BM(F1_5280_5320, F5_5500_5700, F3_5745_5805, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T3_5290_5290, T5_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5540_5660, T6_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL8, ETSI, NO_DFS, NO_PSCAN,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F6_5260_5320, F4_5745_5825, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T2_5290_5290, T2_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5280_5280, T1_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL9, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5180_5320, F1_5500_5620, F3_5745_5805, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T3_5290_5290, T5_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5540_5660, T6_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{APL10, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5180_5320, F5_5500_5700, F3_5745_5805, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T3_5290_5290, T5_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5540_5660, T6_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI1, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F4_5180_5240, F2_5260_5320, F2_5500_5700, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T1_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_5200_5280, T2_5540_5660, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI2, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F3_5180_5240, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI3, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F4_5180_5240, F2_5260_5320, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T1_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI4, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F3_5180_5240, F1_5260_5320, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T2_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI5, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5180_5240, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T4_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{ETSI6, ETSI, DFS_ETSI, PSCAN_ETSI,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F5_5180_5240, F1_5260_5280, F3_5500_5700, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T1_5210_5250, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T4_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC1, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F2_5180_5240, F4_5260_5320, F5_5745_5825, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T6_5210_5210, T2_5250_5290, T6_5760_5800, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T1_5200_5240, T2_5280_5280, T7_5765_5805, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC2, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F6_5180_5240, F5_5260_5320, F6_5745_5825, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T7_5210_5210, T3_5250_5290, T2_5760_5800, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T7_5200_5200, T1_5240_5240, T2_5280_5280, T1_5765_5805, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC3, FCC, DFS_FCC3, PSCAN_FCC | PSCAN_FCC_T, NO_REQ,
+	 BM(F2_5180_5240, F3_5260_5320, F1_5500_5700, F5_5745_5825, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(T6_5210_5210, T2_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T4_5200_5200, T8_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC4, FCC, DFS_FCC3, PSCAN_FCC | PSCAN_FCC_T, NO_REQ,
+	 BM(F1_4942_4987, F1_4945_4985, F1_4950_4980, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T8_5210_5210, T4_5250_5290, T7_5760_5800, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T1_5200_5240, T1_5280_5280, T9_5765_5805, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC5, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BM(F2_5180_5240, F6_5745_5825, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T6_5210_5210, T2_5760_5800, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T8_5200_5200, T7_5765_5805, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{FCC6, FCC, DFS_FCC3, PSCAN_FCC, NO_REQ,
+	 BM(F8_5180_5240, F5_5260_5320, F1_5500_5580, F1_5660_5700,
+	    F6_5745_5825, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T7_5210_5210, T3_5250_5290, T2_5760_5800, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T7_5200_5200, T1_5240_5240, T2_5280_5280, T1_5765_5805, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{MKK1, MKK, NO_DFS, PSCAN_MKK1, DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5170_5230, F4_5180_5240, F2_5260_5320, F4_5500_5700, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(T7_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T5_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+	{MKK2, MKK, NO_DFS, PSCAN_MKK2, DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5055_5055, F1_5040_5080, F1_5170_5230, F4_5180_5240,
+	    F2_5260_5320, F4_5500_5700, -1, -1),
+	 BM(T7_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T5_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK3, MKK, NO_DFS, PSCAN_MKK3, DISALLOW_ADHOC_11A_TURB,
+	 BM(F4_5180_5240, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T9_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK4, MKK, DFS_MKK4, PSCAN_MKK3, DISALLOW_ADHOC_11A_TURB,
+	 BM(F4_5180_5240, F2_5260_5320, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T10_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T6_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK5, MKK, DFS_MKK4, PSCAN_MKK3, DISALLOW_ADHOC_11A_TURB,
+	 BM(F4_5180_5240, F2_5260_5320, F4_5500_5700, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T5_5200_5280, T3_5540_5660, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK6, MKK, NO_DFS, PSCAN_MKK1, DISALLOW_ADHOC_11A_TURB,
+	 BM(F2_5170_5230, F4_5180_5240, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T3_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T6_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK7, MKK, DFS_MKK4, PSCAN_MKK1 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5170_5230, F4_5180_5240, F2_5260_5320, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T5_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK8, MKK, DFS_MKK4, PSCAN_MKK1 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5170_5230, F4_5180_5240, F2_5260_5320, F4_5500_5700, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T5_5200_5280, T3_5540_5660, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK9, MKK, NO_DFS, PSCAN_MKK2 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5055_5055, F1_5040_5080, F4_5180_5240, -1, -1, -1, -1, -1),
+	 BM(T9_5210_5210, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5200_5200, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK10, MKK, DFS_MKK4, PSCAN_MKK2 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5055_5055, F1_5040_5080, F4_5180_5240, F2_5260_5320, -1, -1,
+	    -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK11, MKK, DFS_MKK4, PSCAN_MKK3, DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5055_5055, F1_5040_5080, F4_5180_5240, F2_5260_5320,
+	    F4_5500_5700, -1, -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK12, MKK, DFS_MKK4, PSCAN_MKK1 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5055_5055, F1_5040_5080, F1_5170_5230, F4_5180_5240,
+	    F2_5260_5320, F4_5500_5700, -1, -1),
+	 BM(T3_5210_5290, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T1_5200_5280, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK13, MKK, DFS_MKK4, PSCAN_MKK1 | PSCAN_MKK3,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_5170_5230, F7_5180_5240, F2_5260_5320, F4_5500_5700, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK14, MKK, DFS_MKK4, PSCAN_MKK1, DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5040_5080, F1_5055_5055, F1_5170_5230, F4_5180_5240, -1, -1,
+	    -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{MKK15, MKK, DFS_MKK4, PSCAN_MKK1, DISALLOW_ADHOC_11A_TURB,
+	 BM(F1_4915_4925, F1_4935_4945, F1_4920_4980, F1_5035_5040,
+	    F1_5040_5080, F1_5055_5055, F1_5170_5230, F4_5180_5240,
+	    F2_5260_5320, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO},
+
+
+	{APLD, NO_CTL, NO_DFS, NO_PSCAN, NO_REQ,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F2_2312_2372, F2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(G2_2312_2372, G2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BMZERO},
+
+	{ETSIA, NO_CTL, NO_DFS, PSCAN_ETSIA,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F1_2457_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G1_2457_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{ETSIB, ETSI, NO_DFS, PSCAN_ETSIB,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F1_2432_2442, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G1_2432_2442, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{ETSIC, ETSI, NO_DFS, PSCAN_ETSIC,
+	 DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F3_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G3_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{FCCA, FCC, NO_DFS, NO_PSCAN, NO_REQ,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F1_2412_2462, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G1_2412_2462, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{MKKA, MKK, NO_DFS,
+	 PSCAN_MKKA | PSCAN_MKKA_G | PSCAN_MKKA1 | PSCAN_MKKA1_G |
+	 PSCAN_MKKA2 | PSCAN_MKKA2_G, DISALLOW_ADHOC_11A_TURB,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F2_2412_2462, F1_2467_2472, F2_2484_2484, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(G2_2412_2462, G1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{MKKC, MKK, NO_DFS, NO_PSCAN, NO_REQ,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WORLD, ETSI, NO_DFS, NO_PSCAN, NO_REQ,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BM(F2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(G2_2412_2472, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T2_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR0_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_PER_11D,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, W1_2484_2484, -1, -1,
+	    -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR01_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR,
+	 ADHOC_PER_11D,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2417_2432,
+	    W1_2447_2457, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR02_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR,
+	 ADHOC_PER_11D,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{EU1_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_PER_11D,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W2_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W2_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG2_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR1_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, W1_2484_2484, -1, -1,
+	    -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR2_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825,
+	    W1_5500_5700, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, W1_2484_2484, -1, -1,
+	    -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR3_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_PER_11D,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5170_5230, W1_5745_5825, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG2_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR4_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5745_5825, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2417_2432,
+	    W1_2447_2457, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR5_ETSIC, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5745_5825, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WOR9_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5745_5825, W1_5500_5700, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BM(WT1_5210_5250, WT1_5290_5290, WT1_5760_5800, -1, -1, -1, -1,
+	    -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2417_2432,
+	    W1_2447_2457, -1, -1, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WORA_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5745_5825, W1_5500_5700, -1, -1,
+	    -1, -1, -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{WORB_WORLD, NO_CTL, DFS_FCC3 | DFS_ETSI, PSCAN_WWR, ADHOC_NO_11A,
+	 BM(W1_5260_5320, W1_5180_5240, W1_5500_5700, -1, -1, -1, -1, -1,
+	    -1, -1, -1, -1),
+	 BMZERO,
+	 BMZERO,
+	 BM(W1_2412_2412, W1_2437_2442, W1_2462_2462, W1_2472_2472,
+	    W1_2417_2432, W1_2447_2457, W1_2467_2467, -1, -1, -1, -1, -1),
+	 BM(WG1_2412_2462, WG1_2467_2472, -1, -1, -1, -1, -1, -1, -1, -1,
+	    -1, -1),
+	 BM(T3_2437_2437, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1)},
+
+	{NULL1, NO_CTL, NO_DFS, NO_PSCAN, NO_REQ,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO,
+	 BMZERO}
+};
+
+static const struct cmode modes[] = {
+	{ATH9K_MODE_11A, CHANNEL_A},
+	{ATH9K_MODE_11B, CHANNEL_B},
+	{ATH9K_MODE_11G, CHANNEL_G},
+	{ATH9K_MODE_11NG_HT20, CHANNEL_G_HT20},
+	{ATH9K_MODE_11NG_HT40PLUS, CHANNEL_G_HT40PLUS},
+	{ATH9K_MODE_11NG_HT40MINUS, CHANNEL_G_HT40MINUS},
+	{ATH9K_MODE_11NA_HT20, CHANNEL_A_HT20},
+	{ATH9K_MODE_11NA_HT40PLUS, CHANNEL_A_HT40PLUS},
+	{ATH9K_MODE_11NA_HT40MINUS, CHANNEL_A_HT40MINUS},
+};
+
+static struct japan_bandcheck j_bandcheck[] = {
+	{F1_5170_5230, AR_EEPROM_EEREGCAP_EN_KK_U1_ODD},
+	{F4_5180_5240, AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN},
+	{F2_5260_5320, AR_EEPROM_EEREGCAP_EN_KK_U2},
+	{F4_5500_5700, AR_EEPROM_EEREGCAP_EN_KK_MIDBAND}
+};
+
+
+#endif
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
new file mode 100644
index 00000000000..550129f717e
--- /dev/null
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -0,0 +1,2871 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Implementation of transmit path.
+ */
+
+#include "core.h"
+
+#define BITS_PER_BYTE           8
+#define OFDM_PLCP_BITS          22
+#define HT_RC_2_MCS(_rc)        ((_rc) & 0x0f)
+#define HT_RC_2_STREAMS(_rc)    ((((_rc) & 0x78) >> 3) + 1)
+#define L_STF                   8
+#define L_LTF                   8
+#define L_SIG                   4
+#define HT_SIG                  8
+#define HT_STF                  4
+#define HT_LTF(_ns)             (4 * (_ns))
+#define SYMBOL_TIME(_ns)        ((_ns) << 2) /* ns * 4 us */
+#define SYMBOL_TIME_HALFGI(_ns) (((_ns) * 18 + 4) / 5)  /* ns * 3.6 us */
+#define NUM_SYMBOLS_PER_USEC(_usec) (_usec >> 2)
+#define NUM_SYMBOLS_PER_USEC_HALFGI(_usec) (((_usec*5)-4)/18)
+
+#define OFDM_SIFS_TIME    	    16
+
+static u32 bits_per_symbol[][2] = {
+	/* 20MHz 40MHz */
+	{    26,   54 },     /*  0: BPSK */
+	{    52,  108 },     /*  1: QPSK 1/2 */
+	{    78,  162 },     /*  2: QPSK 3/4 */
+	{   104,  216 },     /*  3: 16-QAM 1/2 */
+	{   156,  324 },     /*  4: 16-QAM 3/4 */
+	{   208,  432 },     /*  5: 64-QAM 2/3 */
+	{   234,  486 },     /*  6: 64-QAM 3/4 */
+	{   260,  540 },     /*  7: 64-QAM 5/6 */
+	{    52,  108 },     /*  8: BPSK */
+	{   104,  216 },     /*  9: QPSK 1/2 */
+	{   156,  324 },     /* 10: QPSK 3/4 */
+	{   208,  432 },     /* 11: 16-QAM 1/2 */
+	{   312,  648 },     /* 12: 16-QAM 3/4 */
+	{   416,  864 },     /* 13: 64-QAM 2/3 */
+	{   468,  972 },     /* 14: 64-QAM 3/4 */
+	{   520, 1080 },     /* 15: 64-QAM 5/6 */
+};
+
+#define IS_HT_RATE(_rate)     ((_rate) & 0x80)
+
+/*
+ * Insert a chain of ath_buf (descriptors) on a multicast txq
+ * but do NOT start tx DMA on this queue.
+ * NB: must be called with txq lock held
+ */
+
+static void ath_tx_mcastqaddbuf(struct ath_softc *sc,
+				struct ath_txq *txq,
+				struct list_head *head)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf;
+
+	if (list_empty(head))
+		return;
+
+	/*
+	 * Insert the frame on the outbound list and
+	 * pass it on to the hardware.
+	 */
+	bf = list_first_entry(head, struct ath_buf, list);
+
+	/*
+	 * The CAB queue is started from the SWBA handler since
+	 * frames only go out on DTIM and to avoid possible races.
+	 */
+	ath9k_hw_set_interrupts(ah, 0);
+
+	/*
+	 * If there is anything in the mcastq, we want to set
+	 * the "more data" bit in the last item in the queue to
+	 * indicate that there is "more data". It makes sense to add
+	 * it here since you are *always* going to have
+	 * more data when adding to this queue, no matter where
+	 * you call from.
+	 */
+
+	if (txq->axq_depth) {
+		struct ath_buf *lbf;
+		struct ieee80211_hdr *hdr;
+
+		/*
+		 * Add the "more data flag" to the last frame
+		 */
+
+		lbf = list_entry(txq->axq_q.prev, struct ath_buf, list);
+		hdr = (struct ieee80211_hdr *)
+			((struct sk_buff *)(lbf->bf_mpdu))->data;
+		hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+	}
+
+	/*
+	 * Now, concat the frame onto the queue
+	 */
+	list_splice_tail_init(head, &txq->axq_q);
+	txq->axq_depth++;
+	txq->axq_totalqueued++;
+	txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list);
+
+	DPRINTF(sc, ATH_DBG_QUEUE,
+		"%s: txq depth = %d\n", __func__, txq->axq_depth);
+	if (txq->axq_link != NULL) {
+		*txq->axq_link = bf->bf_daddr;
+		DPRINTF(sc, ATH_DBG_XMIT,
+			"%s: link[%u](%p)=%llx (%p)\n",
+			__func__,
+			txq->axq_qnum, txq->axq_link,
+			ito64(bf->bf_daddr), bf->bf_desc);
+	}
+	txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link);
+	ath9k_hw_set_interrupts(ah, sc->sc_imask);
+}
+
+/*
+ * Insert a chain of ath_buf (descriptors) on a txq and
+ * assume the descriptors are already chained together by caller.
+ * NB: must be called with txq lock held
+ */
+
+static void ath_tx_txqaddbuf(struct ath_softc *sc,
+		struct ath_txq *txq, struct list_head *head)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf;
+	/*
+	 * Insert the frame on the outbound list and
+	 * pass it on to the hardware.
+	 */
+
+	if (list_empty(head))
+		return;
+
+	bf = list_first_entry(head, struct ath_buf, list);
+
+	list_splice_tail_init(head, &txq->axq_q);
+	txq->axq_depth++;
+	txq->axq_totalqueued++;
+	txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list);
+
+	DPRINTF(sc, ATH_DBG_QUEUE,
+		"%s: txq depth = %d\n", __func__, txq->axq_depth);
+
+	if (txq->axq_link == NULL) {
+		ath9k_hw_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr);
+		DPRINTF(sc, ATH_DBG_XMIT,
+			"%s: TXDP[%u] = %llx (%p)\n",
+			__func__, txq->axq_qnum,
+			ito64(bf->bf_daddr), bf->bf_desc);
+	} else {
+		*txq->axq_link = bf->bf_daddr;
+		DPRINTF(sc, ATH_DBG_XMIT, "%s: link[%u] (%p)=%llx (%p)\n",
+			__func__,
+			txq->axq_qnum, txq->axq_link,
+			ito64(bf->bf_daddr), bf->bf_desc);
+	}
+	txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link);
+	ath9k_hw_txstart(ah, txq->axq_qnum);
+}
+
+/* Get transmit rate index using rate in Kbps */
+
+static int ath_tx_findindex(const struct ath9k_rate_table *rt, int rate)
+{
+	int i;
+	int ndx = 0;
+
+	for (i = 0; i < rt->rateCount; i++) {
+		if (rt->info[i].rateKbps == rate) {
+			ndx = i;
+			break;
+		}
+	}
+
+	return ndx;
+}
+
+/* Check if it's okay to send out aggregates */
+
+static int ath_aggr_query(struct ath_softc *sc,
+	struct ath_node *an, u8 tidno)
+{
+	struct ath_atx_tid *tid;
+	tid = ATH_AN_2_TID(an, tidno);
+
+	if (tid->addba_exchangecomplete || tid->addba_exchangeinprogress)
+		return 1;
+	else
+		return 0;
+}
+
+static enum ath9k_pkt_type get_hal_packet_type(struct ieee80211_hdr *hdr)
+{
+	enum ath9k_pkt_type htype;
+	__le16 fc;
+
+	fc = hdr->frame_control;
+
+	/* Calculate Atheros packet type from IEEE80211 packet header */
+
+	if (ieee80211_is_beacon(fc))
+		htype = ATH9K_PKT_TYPE_BEACON;
+	else if (ieee80211_is_probe_resp(fc))
+		htype = ATH9K_PKT_TYPE_PROBE_RESP;
+	else if (ieee80211_is_atim(fc))
+		htype = ATH9K_PKT_TYPE_ATIM;
+	else if (ieee80211_is_pspoll(fc))
+		htype = ATH9K_PKT_TYPE_PSPOLL;
+	else
+		htype = ATH9K_PKT_TYPE_NORMAL;
+
+	return htype;
+}
+
+static void fill_min_rates(struct sk_buff *skb, struct ath_tx_control *txctl)
+{
+	struct ieee80211_hdr *hdr;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ath_tx_info_priv *tx_info_priv;
+	__le16 fc;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+	fc = hdr->frame_control;
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+
+	if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) {
+		txctl->use_minrate = 1;
+		txctl->min_rate = tx_info_priv->min_rate;
+	} else if (ieee80211_is_data(fc)) {
+		if (ieee80211_is_nullfunc(fc) ||
+			/* Port Access Entity (IEEE 802.1X) */
+			(skb->protocol == cpu_to_be16(0x888E))) {
+			txctl->use_minrate = 1;
+			txctl->min_rate = tx_info_priv->min_rate;
+		}
+		if (is_multicast_ether_addr(hdr->addr1))
+			txctl->mcast_rate = tx_info_priv->min_rate;
+	}
+
+}
+
+/* This function will setup additional txctl information, mostly rate stuff */
+/* FIXME: seqno, ps */
+static int ath_tx_prepare(struct ath_softc *sc,
+			  struct sk_buff *skb,
+			  struct ath_tx_control *txctl)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_hdr *hdr;
+	struct ath_rc_series *rcs;
+	struct ath_txq *txq = NULL;
+	const struct ath9k_rate_table *rt;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ath_tx_info_priv *tx_info_priv;
+	int hdrlen;
+	u8 rix, antenna;
+	__le16 fc;
+	u8 *qc;
+
+	memset(txctl, 0, sizeof(struct ath_tx_control));
+
+	txctl->dev = sc;
+	hdr = (struct ieee80211_hdr *)skb->data;
+	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+	fc = hdr->frame_control;
+
+	rt = sc->sc_currates;
+	BUG_ON(!rt);
+
+	/* Fill misc fields */
+
+	spin_lock_bh(&sc->node_lock);
+	txctl->an = ath_node_get(sc, hdr->addr1);
+	/* create a temp node, if the node is not there already */
+	if (!txctl->an)
+		txctl->an = ath_node_attach(sc, hdr->addr1, 0);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (ieee80211_is_data_qos(fc)) {
+		qc = ieee80211_get_qos_ctl(hdr);
+		txctl->tidno = qc[0] & 0xf;
+	}
+
+	txctl->if_id = 0;
+	txctl->nextfraglen = 0;
+	txctl->frmlen = skb->len + FCS_LEN - (hdrlen & 3);
+	txctl->txpower = MAX_RATE_POWER; /* FIXME */
+
+	/* Fill Key related fields */
+
+	txctl->keytype = ATH9K_KEY_TYPE_CLEAR;
+	txctl->keyix = ATH9K_TXKEYIX_INVALID;
+
+	if (tx_info->control.hw_key) {
+		txctl->keyix = tx_info->control.hw_key->hw_key_idx;
+		txctl->frmlen += tx_info->control.icv_len;
+
+		if (sc->sc_keytype == ATH9K_CIPHER_WEP)
+			txctl->keytype = ATH9K_KEY_TYPE_WEP;
+		else if (sc->sc_keytype == ATH9K_CIPHER_TKIP)
+			txctl->keytype = ATH9K_KEY_TYPE_TKIP;
+		else if (sc->sc_keytype == ATH9K_CIPHER_AES_CCM)
+			txctl->keytype = ATH9K_KEY_TYPE_AES;
+	}
+
+	/* Fill packet type */
+
+	txctl->atype = get_hal_packet_type(hdr);
+
+	/* Fill qnum */
+
+	txctl->qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc);
+	txq = &sc->sc_txq[txctl->qnum];
+	spin_lock_bh(&txq->axq_lock);
+
+	/* Try to avoid running out of descriptors */
+	if (txq->axq_depth >= (ATH_TXBUF - 20)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: TX queue: %d is full, depth: %d\n",
+			__func__,
+			txctl->qnum,
+			txq->axq_depth);
+		ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
+		txq->stopped = 1;
+		spin_unlock_bh(&txq->axq_lock);
+		return -1;
+	}
+
+	spin_unlock_bh(&txq->axq_lock);
+
+	/* Fill rate */
+
+	fill_min_rates(skb, txctl);
+
+	/* Fill flags */
+
+	txctl->flags = ATH9K_TXDESC_CLRDMASK;    /* needed for crypto errors */
+
+	if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
+		txctl->flags |= ATH9K_TXDESC_NOACK;
+	if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+		txctl->flags |= ATH9K_TXDESC_RTSENA;
+
+	/*
+	 * Setup for rate calculations.
+	 */
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+	rcs = tx_info_priv->rcs;
+
+	if (ieee80211_is_data(fc) && !txctl->use_minrate) {
+
+		/* Enable HT only for DATA frames and not for EAPOL */
+		txctl->ht = (hw->conf.ht_conf.ht_supported &&
+			    (tx_info->flags & IEEE80211_TX_CTL_AMPDU));
+
+		if (is_multicast_ether_addr(hdr->addr1)) {
+			rcs[0].rix = (u8)
+				ath_tx_findindex(rt, txctl->mcast_rate);
+
+			/*
+			 * mcast packets are not re-tried.
+			 */
+			rcs[0].tries = 1;
+		}
+		/* For HT capable stations, we save tidno for later use.
+		 * We also override seqno set by upper layer with the one
+		 * in tx aggregation state.
+		 *
+		 * First, the fragmentation stat is determined.
+		 * If fragmentation is on, the sequence number is
+		 * not overridden, since it has been
+		 * incremented by the fragmentation routine.
+		 */
+		if (likely(!(txctl->flags & ATH9K_TXDESC_FRAG_IS_ON)) &&
+			txctl->ht && sc->sc_txaggr) {
+			struct ath_atx_tid *tid;
+
+			tid = ATH_AN_2_TID(txctl->an, txctl->tidno);
+
+			hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
+				IEEE80211_SEQ_SEQ_SHIFT);
+			txctl->seqno = tid->seq_next;
+			INCR(tid->seq_next, IEEE80211_SEQ_MAX);
+		}
+	} else {
+		/* for management and control frames,
+		 * or for NULL and EAPOL frames */
+		if (txctl->min_rate)
+			rcs[0].rix = ath_rate_findrateix(sc, txctl->min_rate);
+		else
+			rcs[0].rix = 0;
+		rcs[0].tries = ATH_MGT_TXMAXTRY;
+	}
+	rix = rcs[0].rix;
+
+	/*
+	 * Calculate duration.  This logically belongs in the 802.11
+	 * layer but it lacks sufficient information to calculate it.
+	 */
+	if ((txctl->flags & ATH9K_TXDESC_NOACK) == 0 && !ieee80211_is_ctl(fc)) {
+		u16 dur;
+		/*
+		 * XXX not right with fragmentation.
+		 */
+		if (sc->sc_flags & ATH_PREAMBLE_SHORT)
+			dur = rt->info[rix].spAckDuration;
+		else
+			dur = rt->info[rix].lpAckDuration;
+
+		if (le16_to_cpu(hdr->frame_control) &
+				IEEE80211_FCTL_MOREFRAGS) {
+			dur += dur;  /* Add additional 'SIFS + ACK' */
+
+			/*
+			** Compute size of next fragment in order to compute
+			** durations needed to update NAV.
+			** The last fragment uses the ACK duration only.
+			** Add time for next fragment.
+			*/
+			dur += ath9k_hw_computetxtime(sc->sc_ah, rt,
+					txctl->nextfraglen,
+					rix, sc->sc_flags & ATH_PREAMBLE_SHORT);
+		}
+
+		if (ieee80211_has_morefrags(fc) ||
+		     (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) {
+			/*
+			**  Force hardware to use computed duration for next
+			**  fragment by disabling multi-rate retry, which
+			**  updates duration based on the multi-rate
+			**  duration table.
+			*/
+			rcs[1].tries = rcs[2].tries = rcs[3].tries = 0;
+			rcs[1].rix = rcs[2].rix = rcs[3].rix = 0;
+			/* reset tries but keep rate index */
+			rcs[0].tries = ATH_TXMAXTRY;
+		}
+
+		hdr->duration_id = cpu_to_le16(dur);
+	}
+
+	/*
+	 * Determine if a tx interrupt should be generated for
+	 * this descriptor.  We take a tx interrupt to reap
+	 * descriptors when the h/w hits an EOL condition or
+	 * when the descriptor is specifically marked to generate
+	 * an interrupt.  We periodically mark descriptors in this
+	 * way to insure timely replenishing of the supply needed
+	 * for sending frames.  Defering interrupts reduces system
+	 * load and potentially allows more concurrent work to be
+	 * done but if done to aggressively can cause senders to
+	 * backup.
+	 *
+	 * NB: use >= to deal with sc_txintrperiod changing
+	 *     dynamically through sysctl.
+	 */
+	spin_lock_bh(&txq->axq_lock);
+	if ((++txq->axq_intrcnt >= sc->sc_txintrperiod)) {
+		txctl->flags |= ATH9K_TXDESC_INTREQ;
+		txq->axq_intrcnt = 0;
+	}
+	spin_unlock_bh(&txq->axq_lock);
+
+	if (is_multicast_ether_addr(hdr->addr1)) {
+		antenna = sc->sc_mcastantenna + 1;
+		sc->sc_mcastantenna = (sc->sc_mcastantenna + 1) & 0x1;
+	} else
+		antenna = sc->sc_txantenna;
+
+#ifdef USE_LEGACY_HAL
+	txctl->antenna = antenna;
+#endif
+	return 0;
+}
+
+/* To complete a chain of buffers associated a frame */
+
+static void ath_tx_complete_buf(struct ath_softc *sc,
+				struct ath_buf *bf,
+				struct list_head *bf_q,
+				int txok, int sendbar)
+{
+	struct sk_buff *skb = bf->bf_mpdu;
+	struct ath_xmit_status tx_status;
+	dma_addr_t *pa;
+
+	/*
+	 * Set retry information.
+	 * NB: Don't use the information in the descriptor, because the frame
+	 * could be software retried.
+	 */
+	tx_status.retries = bf->bf_retries;
+	tx_status.flags = 0;
+
+	if (sendbar)
+		tx_status.flags = ATH_TX_BAR;
+
+	if (!txok) {
+		tx_status.flags |= ATH_TX_ERROR;
+
+		if (bf->bf_isxretried)
+			tx_status.flags |= ATH_TX_XRETRY;
+	}
+	/* Unmap this frame */
+	pa = get_dma_mem_context(bf, bf_dmacontext);
+	pci_unmap_single(sc->pdev,
+			 *pa,
+			 skb->len,
+			 PCI_DMA_TODEVICE);
+	/* complete this frame */
+	ath_tx_complete(sc, skb, &tx_status, bf->bf_node);
+
+	/*
+	 * Return the list of ath_buf of this mpdu to free queue
+	 */
+	spin_lock_bh(&sc->sc_txbuflock);
+	list_splice_tail_init(bf_q, &sc->sc_txbuf);
+	spin_unlock_bh(&sc->sc_txbuflock);
+}
+
+/*
+ * queue up a dest/ac pair for tx scheduling
+ * NB: must be called with txq lock held
+ */
+
+static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid)
+{
+	struct ath_atx_ac *ac = tid->ac;
+
+	/*
+	 * if tid is paused, hold off
+	 */
+	if (tid->paused)
+		return;
+
+	/*
+	 * add tid to ac atmost once
+	 */
+	if (tid->sched)
+		return;
+
+	tid->sched = true;
+	list_add_tail(&tid->list, &ac->tid_q);
+
+	/*
+	 * add node ac to txq atmost once
+	 */
+	if (ac->sched)
+		return;
+
+	ac->sched = true;
+	list_add_tail(&ac->list, &txq->axq_acq);
+}
+
+/* pause a tid */
+
+static void ath_tx_pause_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+{
+	struct ath_txq *txq = &sc->sc_txq[tid->ac->qnum];
+
+	spin_lock_bh(&txq->axq_lock);
+
+	tid->paused++;
+
+	spin_unlock_bh(&txq->axq_lock);
+}
+
+/* resume a tid and schedule aggregate */
+
+void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+{
+	struct ath_txq *txq = &sc->sc_txq[tid->ac->qnum];
+
+	ASSERT(tid->paused > 0);
+	spin_lock_bh(&txq->axq_lock);
+
+	tid->paused--;
+
+	if (tid->paused > 0)
+		goto unlock;
+
+	if (list_empty(&tid->buf_q))
+		goto unlock;
+
+	/*
+	 * Add this TID to scheduler and try to send out aggregates
+	 */
+	ath_tx_queue_tid(txq, tid);
+	ath_txq_schedule(sc, txq);
+unlock:
+	spin_unlock_bh(&txq->axq_lock);
+}
+
+/* Compute the number of bad frames */
+
+static int ath_tx_num_badfrms(struct ath_softc *sc,
+	struct ath_buf *bf, int txok)
+{
+	struct ath_node *an = bf->bf_node;
+	int isnodegone = (an->an_flags & ATH_NODE_CLEAN);
+	struct ath_buf *bf_last = bf->bf_lastbf;
+	struct ath_desc *ds = bf_last->bf_desc;
+	u16 seq_st = 0;
+	u32 ba[WME_BA_BMP_SIZE >> 5];
+	int ba_index;
+	int nbad = 0;
+	int isaggr = 0;
+
+	if (isnodegone || ds->ds_txstat.ts_flags == ATH9K_TX_SW_ABORTED)
+		return 0;
+
+	isaggr = bf->bf_isaggr;
+	if (isaggr) {
+		seq_st = ATH_DS_BA_SEQ(ds);
+		memcpy(ba, ATH_DS_BA_BITMAP(ds), WME_BA_BMP_SIZE >> 3);
+	}
+
+	while (bf) {
+		ba_index = ATH_BA_INDEX(seq_st, bf->bf_seqno);
+		if (!txok || (isaggr && !ATH_BA_ISSET(ba, ba_index)))
+			nbad++;
+
+		bf = bf->bf_next;
+	}
+
+	return nbad;
+}
+
+static void ath_tx_set_retry(struct ath_softc *sc, struct ath_buf *bf)
+{
+	struct sk_buff *skb;
+	struct ieee80211_hdr *hdr;
+
+	bf->bf_isretried = 1;
+	bf->bf_retries++;
+
+	skb = bf->bf_mpdu;
+	hdr = (struct ieee80211_hdr *)skb->data;
+	hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_RETRY);
+}
+
+/* Update block ack window */
+
+static void ath_tx_update_baw(struct ath_softc *sc,
+	struct ath_atx_tid *tid, int seqno)
+{
+	int index, cindex;
+
+	index  = ATH_BA_INDEX(tid->seq_start, seqno);
+	cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
+
+	tid->tx_buf[cindex] = NULL;
+
+	while (tid->baw_head != tid->baw_tail && !tid->tx_buf[tid->baw_head]) {
+		INCR(tid->seq_start, IEEE80211_SEQ_MAX);
+		INCR(tid->baw_head, ATH_TID_MAX_BUFS);
+	}
+}
+
+/*
+ * ath_pkt_dur - compute packet duration (NB: not NAV)
+ *
+ * rix - rate index
+ * pktlen - total bytes (delims + data + fcs + pads + pad delims)
+ * width  - 0 for 20 MHz, 1 for 40 MHz
+ * half_gi - to use 4us v/s 3.6 us for symbol time
+ */
+
+static u32 ath_pkt_duration(struct ath_softc *sc,
+				  u8 rix,
+				  struct ath_buf *bf,
+				  int width,
+				  int half_gi,
+				  bool shortPreamble)
+{
+	const struct ath9k_rate_table *rt = sc->sc_currates;
+	u32 nbits, nsymbits, duration, nsymbols;
+	u8 rc;
+	int streams, pktlen;
+
+	pktlen = bf->bf_isaggr ? bf->bf_al : bf->bf_frmlen;
+	rc = rt->info[rix].rateCode;
+
+	/*
+	 * for legacy rates, use old function to compute packet duration
+	 */
+	if (!IS_HT_RATE(rc))
+		return ath9k_hw_computetxtime(sc->sc_ah,
+					     rt,
+					     pktlen,
+					     rix,
+					     shortPreamble);
+	/*
+	 * find number of symbols: PLCP + data
+	 */
+	nbits = (pktlen << 3) + OFDM_PLCP_BITS;
+	nsymbits = bits_per_symbol[HT_RC_2_MCS(rc)][width];
+	nsymbols = (nbits + nsymbits - 1) / nsymbits;
+
+	if (!half_gi)
+		duration = SYMBOL_TIME(nsymbols);
+	else
+		duration = SYMBOL_TIME_HALFGI(nsymbols);
+
+	/*
+	 * addup duration for legacy/ht training and signal fields
+	 */
+	streams = HT_RC_2_STREAMS(rc);
+	duration += L_STF + L_LTF + L_SIG + HT_SIG + HT_STF + HT_LTF(streams);
+	return duration;
+}
+
+/* Rate module function to set rate related fields in tx descriptor */
+
+static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	const struct ath9k_rate_table *rt;
+	struct ath_desc *ds = bf->bf_desc;
+	struct ath_desc *lastds = bf->bf_lastbf->bf_desc;
+	struct ath9k_11n_rate_series series[4];
+	int i, flags, rtsctsena = 0, dynamic_mimops = 0;
+	u32 ctsduration = 0;
+	u8 rix = 0, cix, ctsrate = 0;
+	u32 aggr_limit_with_rts = sc->sc_rtsaggrlimit;
+	struct ath_node *an = (struct ath_node *) bf->bf_node;
+
+	/*
+	 * get the cix for the lowest valid rix.
+	 */
+	rt = sc->sc_currates;
+	for (i = 4; i--;) {
+		if (bf->bf_rcs[i].tries) {
+			rix = bf->bf_rcs[i].rix;
+			break;
+		}
+	}
+	flags = (bf->bf_flags & (ATH9K_TXDESC_RTSENA | ATH9K_TXDESC_CTSENA));
+	cix = rt->info[rix].controlRate;
+
+	/*
+	 * If 802.11g protection is enabled, determine whether
+	 * to use RTS/CTS or just CTS.  Note that this is only
+	 * done for OFDM/HT unicast frames.
+	 */
+	if (sc->sc_protmode != PROT_M_NONE &&
+	    (rt->info[rix].phy == PHY_OFDM ||
+	     rt->info[rix].phy == PHY_HT) &&
+	    (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) {
+		if (sc->sc_protmode == PROT_M_RTSCTS)
+			flags = ATH9K_TXDESC_RTSENA;
+		else if (sc->sc_protmode == PROT_M_CTSONLY)
+			flags = ATH9K_TXDESC_CTSENA;
+
+		cix = rt->info[sc->sc_protrix].controlRate;
+		rtsctsena = 1;
+	}
+
+	/* For 11n, the default behavior is to enable RTS for
+	 * hw retried frames. We enable the global flag here and
+	 * let rate series flags determine which rates will actually
+	 * use RTS.
+	 */
+	if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) && bf->bf_isdata) {
+		BUG_ON(!an);
+		/*
+		 * 802.11g protection not needed, use our default behavior
+		 */
+		if (!rtsctsena)
+			flags = ATH9K_TXDESC_RTSENA;
+		/*
+		 * For dynamic MIMO PS, RTS needs to precede the first aggregate
+		 * and the second aggregate should have any protection at all.
+		 */
+		if (an->an_smmode == ATH_SM_PWRSAV_DYNAMIC) {
+			if (!bf->bf_aggrburst) {
+				flags = ATH9K_TXDESC_RTSENA;
+				dynamic_mimops = 1;
+			} else {
+				flags = 0;
+			}
+		}
+	}
+
+	/*
+	 * Set protection if aggregate protection on
+	 */
+	if (sc->sc_config.ath_aggr_prot &&
+	    (!bf->bf_isaggr || (bf->bf_isaggr && bf->bf_al < 8192))) {
+		flags = ATH9K_TXDESC_RTSENA;
+		cix = rt->info[sc->sc_protrix].controlRate;
+		rtsctsena = 1;
+	}
+
+	/*
+	 *  For AR5416 - RTS cannot be followed by a frame larger than 8K.
+	 */
+	if (bf->bf_isaggr && (bf->bf_al > aggr_limit_with_rts)) {
+		/*
+		 * Ensure that in the case of SM Dynamic power save
+		 * while we are bursting the second aggregate the
+		 * RTS is cleared.
+		 */
+		flags &= ~(ATH9K_TXDESC_RTSENA);
+	}
+
+	/*
+	 * CTS transmit rate is derived from the transmit rate
+	 * by looking in the h/w rate table.  We must also factor
+	 * in whether or not a short preamble is to be used.
+	 */
+	/* NB: cix is set above where RTS/CTS is enabled */
+	BUG_ON(cix == 0xff);
+	ctsrate = rt->info[cix].rateCode |
+		(bf->bf_shpreamble ? rt->info[cix].shortPreamble : 0);
+
+	/*
+	 * Setup HAL rate series
+	 */
+	memzero(series, sizeof(struct ath9k_11n_rate_series) * 4);
+
+	for (i = 0; i < 4; i++) {
+		if (!bf->bf_rcs[i].tries)
+			continue;
+
+		rix = bf->bf_rcs[i].rix;
+
+		series[i].Rate = rt->info[rix].rateCode |
+			(bf->bf_shpreamble ? rt->info[rix].shortPreamble : 0);
+
+		series[i].Tries = bf->bf_rcs[i].tries;
+
+		series[i].RateFlags = (
+			(bf->bf_rcs[i].flags & ATH_RC_RTSCTS_FLAG) ?
+				ATH9K_RATESERIES_RTS_CTS : 0) |
+			((bf->bf_rcs[i].flags & ATH_RC_CW40_FLAG) ?
+				ATH9K_RATESERIES_2040 : 0) |
+			((bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG) ?
+				ATH9K_RATESERIES_HALFGI : 0);
+
+		series[i].PktDuration = ath_pkt_duration(
+			sc, rix, bf,
+			(bf->bf_rcs[i].flags & ATH_RC_CW40_FLAG) != 0,
+			(bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG),
+			bf->bf_shpreamble);
+
+		if ((an->an_smmode == ATH_SM_PWRSAV_STATIC) &&
+		    (bf->bf_rcs[i].flags & ATH_RC_DS_FLAG) == 0) {
+			/*
+			 * When sending to an HT node that has enabled static
+			 * SM/MIMO power save, send at single stream rates but
+			 * use maximum allowed transmit chains per user,
+			 * hardware, regulatory, or country limits for
+			 * better range.
+			 */
+			series[i].ChSel = sc->sc_tx_chainmask;
+		} else {
+			if (bf->bf_ht)
+				series[i].ChSel =
+					ath_chainmask_sel_logic(sc, an);
+			else
+				series[i].ChSel = sc->sc_tx_chainmask;
+		}
+
+		if (rtsctsena)
+			series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
+
+		/*
+		 * Set RTS for all rates if node is in dynamic powersave
+		 * mode and we are using dual stream rates.
+		 */
+		if (dynamic_mimops && (bf->bf_rcs[i].flags & ATH_RC_DS_FLAG))
+			series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
+	}
+
+	/*
+	 * For non-HT devices, calculate RTS/CTS duration in software
+	 * and disable multi-rate retry.
+	 */
+	if (flags && !(ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)) {
+		/*
+		 * Compute the transmit duration based on the frame
+		 * size and the size of an ACK frame.  We call into the
+		 * HAL to do the computation since it depends on the
+		 * characteristics of the actual PHY being used.
+		 *
+		 * NB: CTS is assumed the same size as an ACK so we can
+		 *     use the precalculated ACK durations.
+		 */
+		if (flags & ATH9K_TXDESC_RTSENA) {    /* SIFS + CTS */
+			ctsduration += bf->bf_shpreamble ?
+				rt->info[cix].spAckDuration :
+				rt->info[cix].lpAckDuration;
+		}
+
+		ctsduration += series[0].PktDuration;
+
+		if ((bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { /* SIFS + ACK */
+			ctsduration += bf->bf_shpreamble ?
+				rt->info[rix].spAckDuration :
+				rt->info[rix].lpAckDuration;
+		}
+
+		/*
+		 * Disable multi-rate retry when using RTS/CTS by clearing
+		 * series 1, 2 and 3.
+		 */
+		memzero(&series[1], sizeof(struct ath9k_11n_rate_series) * 3);
+	}
+
+	/*
+	 * set dur_update_en for l-sig computation except for PS-Poll frames
+	 */
+	ath9k_hw_set11n_ratescenario(ah, ds, lastds,
+				    !bf->bf_ispspoll,
+				    ctsrate,
+				    ctsduration,
+				    series, 4, flags);
+	if (sc->sc_config.ath_aggr_prot && flags)
+		ath9k_hw_set11n_burstduration(ah, ds, 8192);
+}
+
+/*
+ * Function to send a normal HT (non-AMPDU) frame
+ * NB: must be called with txq lock held
+ */
+
+static int ath_tx_send_normal(struct ath_softc *sc,
+			      struct ath_txq *txq,
+			      struct ath_atx_tid *tid,
+			      struct list_head *bf_head)
+{
+	struct ath_buf *bf;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *tx_info;
+	struct ath_tx_info_priv *tx_info_priv;
+
+	BUG_ON(list_empty(bf_head));
+
+	bf = list_first_entry(bf_head, struct ath_buf, list);
+	bf->bf_isampdu = 0; /* regular HT frame */
+
+	skb = (struct sk_buff *)bf->bf_mpdu;
+	tx_info = IEEE80211_SKB_CB(skb);
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+	memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
+
+	/* update starting sequence number for subsequent ADDBA request */
+	INCR(tid->seq_start, IEEE80211_SEQ_MAX);
+
+	/* Queue to h/w without aggregation */
+	bf->bf_nframes = 1;
+	bf->bf_lastbf = bf->bf_lastfrm; /* one single frame */
+	ath_buf_set_rate(sc, bf);
+	ath_tx_txqaddbuf(sc, txq, bf_head);
+
+	return 0;
+}
+
+/* flush tid's software queue and send frames as non-ampdu's */
+
+static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+{
+	struct ath_txq *txq = &sc->sc_txq[tid->ac->qnum];
+	struct ath_buf *bf;
+	struct list_head bf_head;
+	INIT_LIST_HEAD(&bf_head);
+
+	ASSERT(tid->paused > 0);
+	spin_lock_bh(&txq->axq_lock);
+
+	tid->paused--;
+
+	if (tid->paused > 0) {
+		spin_unlock_bh(&txq->axq_lock);
+		return;
+	}
+
+	while (!list_empty(&tid->buf_q)) {
+		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
+		ASSERT(!bf->bf_isretried);
+		list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list);
+		ath_tx_send_normal(sc, txq, tid, &bf_head);
+	}
+
+	spin_unlock_bh(&txq->axq_lock);
+}
+
+/* Completion routine of an aggregate */
+
+static void ath_tx_complete_aggr_rifs(struct ath_softc *sc,
+				      struct ath_txq *txq,
+				      struct ath_buf *bf,
+				      struct list_head *bf_q,
+				      int txok)
+{
+	struct ath_node *an = bf->bf_node;
+	struct ath_atx_tid *tid = ATH_AN_2_TID(an, bf->bf_tidno);
+	struct ath_buf *bf_last = bf->bf_lastbf;
+	struct ath_desc *ds = bf_last->bf_desc;
+	struct ath_buf *bf_next, *bf_lastq = NULL;
+	struct list_head bf_head, bf_pending;
+	u16 seq_st = 0;
+	u32 ba[WME_BA_BMP_SIZE >> 5];
+	int isaggr, txfail, txpending, sendbar = 0, needreset = 0;
+	int isnodegone = (an->an_flags & ATH_NODE_CLEAN);
+
+	isaggr = bf->bf_isaggr;
+	if (isaggr) {
+		if (txok) {
+			if (ATH_DS_TX_BA(ds)) {
+				/*
+				 * extract starting sequence and
+				 * block-ack bitmap
+				 */
+				seq_st = ATH_DS_BA_SEQ(ds);
+				memcpy(ba,
+					ATH_DS_BA_BITMAP(ds),
+					WME_BA_BMP_SIZE >> 3);
+			} else {
+				memzero(ba, WME_BA_BMP_SIZE >> 3);
+
+				/*
+				 * AR5416 can become deaf/mute when BA
+				 * issue happens. Chip needs to be reset.
+				 * But AP code may have sychronization issues
+				 * when perform internal reset in this routine.
+				 * Only enable reset in STA mode for now.
+				 */
+				if (sc->sc_opmode == ATH9K_M_STA)
+					needreset = 1;
+			}
+		} else {
+			memzero(ba, WME_BA_BMP_SIZE >> 3);
+		}
+	}
+
+	INIT_LIST_HEAD(&bf_pending);
+	INIT_LIST_HEAD(&bf_head);
+
+	while (bf) {
+		txfail = txpending = 0;
+		bf_next = bf->bf_next;
+
+		if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, bf->bf_seqno))) {
+			/* transmit completion, subframe is
+			 * acked by block ack */
+		} else if (!isaggr && txok) {
+			/* transmit completion */
+		} else {
+
+			if (!tid->cleanup_inprogress && !isnodegone &&
+			    ds->ds_txstat.ts_flags != ATH9K_TX_SW_ABORTED) {
+				if (bf->bf_retries < ATH_MAX_SW_RETRIES) {
+					ath_tx_set_retry(sc, bf);
+					txpending = 1;
+				} else {
+					bf->bf_isxretried = 1;
+					txfail = 1;
+					sendbar = 1;
+				}
+			} else {
+				/*
+				 * cleanup in progress, just fail
+				 * the un-acked sub-frames
+				 */
+				txfail = 1;
+			}
+		}
+		/*
+		 * Remove ath_buf's of this sub-frame from aggregate queue.
+		 */
+		if (bf_next == NULL) {  /* last subframe in the aggregate */
+			ASSERT(bf->bf_lastfrm == bf_last);
+
+			/*
+			 * The last descriptor of the last sub frame could be
+			 * a holding descriptor for h/w. If that's the case,
+			 * bf->bf_lastfrm won't be in the bf_q.
+			 * Make sure we handle bf_q properly here.
+			 */
+
+			if (!list_empty(bf_q)) {
+				bf_lastq = list_entry(bf_q->prev,
+					struct ath_buf, list);
+				list_cut_position(&bf_head,
+					bf_q, &bf_lastq->list);
+			} else {
+				/*
+				 * XXX: if the last subframe only has one
+				 * descriptor which is also being used as
+				 * a holding descriptor. Then the ath_buf
+				 * is not in the bf_q at all.
+				 */
+				INIT_LIST_HEAD(&bf_head);
+			}
+		} else {
+			ASSERT(!list_empty(bf_q));
+			list_cut_position(&bf_head,
+				bf_q, &bf->bf_lastfrm->list);
+		}
+
+		if (!txpending) {
+			/*
+			 * complete the acked-ones/xretried ones; update
+			 * block-ack window
+			 */
+			spin_lock_bh(&txq->axq_lock);
+			ath_tx_update_baw(sc, tid, bf->bf_seqno);
+			spin_unlock_bh(&txq->axq_lock);
+
+			/* complete this sub-frame */
+			ath_tx_complete_buf(sc, bf, &bf_head, !txfail, sendbar);
+		} else {
+			/*
+			 * retry the un-acked ones
+			 */
+			/*
+			 * XXX: if the last descriptor is holding descriptor,
+			 * in order to requeue the frame to software queue, we
+			 * need to allocate a new descriptor and
+			 * copy the content of holding descriptor to it.
+			 */
+			if (bf->bf_next == NULL &&
+			    bf_last->bf_status & ATH_BUFSTATUS_STALE) {
+				struct ath_buf *tbf;
+
+				/* allocate new descriptor */
+				spin_lock_bh(&sc->sc_txbuflock);
+				ASSERT(!list_empty((&sc->sc_txbuf)));
+				tbf = list_first_entry(&sc->sc_txbuf,
+						struct ath_buf, list);
+				list_del(&tbf->list);
+				spin_unlock_bh(&sc->sc_txbuflock);
+
+				ATH_TXBUF_RESET(tbf);
+
+				/* copy descriptor content */
+				tbf->bf_mpdu = bf_last->bf_mpdu;
+				tbf->bf_node = bf_last->bf_node;
+				tbf->bf_buf_addr = bf_last->bf_buf_addr;
+				*(tbf->bf_desc) = *(bf_last->bf_desc);
+
+				/* link it to the frame */
+				if (bf_lastq) {
+					bf_lastq->bf_desc->ds_link =
+						tbf->bf_daddr;
+					bf->bf_lastfrm = tbf;
+					ath9k_hw_cleartxdesc(sc->sc_ah,
+						bf->bf_lastfrm->bf_desc);
+				} else {
+					tbf->bf_state = bf_last->bf_state;
+					tbf->bf_lastfrm = tbf;
+					ath9k_hw_cleartxdesc(sc->sc_ah,
+						tbf->bf_lastfrm->bf_desc);
+
+					/* copy the DMA context */
+					copy_dma_mem_context(
+						get_dma_mem_context(tbf,
+							bf_dmacontext),
+						get_dma_mem_context(bf_last,
+							bf_dmacontext));
+				}
+				list_add_tail(&tbf->list, &bf_head);
+			} else {
+				/*
+				 * Clear descriptor status words for
+				 * software retry
+				 */
+				ath9k_hw_cleartxdesc(sc->sc_ah,
+					bf->bf_lastfrm->bf_desc);
+			}
+
+			/*
+			 * Put this buffer to the temporary pending
+			 * queue to retain ordering
+			 */
+			list_splice_tail_init(&bf_head, &bf_pending);
+		}
+
+		bf = bf_next;
+	}
+
+	/*
+	 * node is already gone. no more assocication
+	 * with the node. the node might have been freed
+	 * any  node acces can result in panic.note tid
+	 * is part of the node.
+	 */
+	if (isnodegone)
+		return;
+
+	if (tid->cleanup_inprogress) {
+		/* check to see if we're done with cleaning the h/w queue */
+		spin_lock_bh(&txq->axq_lock);
+
+		if (tid->baw_head == tid->baw_tail) {
+			tid->addba_exchangecomplete = 0;
+			tid->addba_exchangeattempts = 0;
+			spin_unlock_bh(&txq->axq_lock);
+
+			tid->cleanup_inprogress = false;
+
+			/* send buffered frames as singles */
+			ath_tx_flush_tid(sc, tid);
+		} else
+			spin_unlock_bh(&txq->axq_lock);
+
+		return;
+	}
+
+	/*
+	 * prepend un-acked frames to the beginning of the pending frame queue
+	 */
+	if (!list_empty(&bf_pending)) {
+		spin_lock_bh(&txq->axq_lock);
+		/* Note: we _prepend_, we _do_not_ at to
+		 * the end of the queue ! */
+		list_splice(&bf_pending, &tid->buf_q);
+		ath_tx_queue_tid(txq, tid);
+		spin_unlock_bh(&txq->axq_lock);
+	}
+
+	if (needreset)
+		ath_internal_reset(sc);
+
+	return;
+}
+
+/* Process completed xmit descriptors from the specified queue */
+
+static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_buf *bf, *lastbf, *bf_held = NULL;
+	struct list_head bf_head;
+	struct ath_desc *ds, *tmp_ds;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *tx_info;
+	struct ath_tx_info_priv *tx_info_priv;
+	int nacked, txok, nbad = 0, isrifs = 0;
+	int status;
+
+	DPRINTF(sc, ATH_DBG_QUEUE,
+		"%s: tx queue %d (%x), link %p\n", __func__,
+		txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum),
+		txq->axq_link);
+
+	nacked = 0;
+	for (;;) {
+		spin_lock_bh(&txq->axq_lock);
+		txq->axq_intrcnt = 0; /* reset periodic desc intr count */
+		if (list_empty(&txq->axq_q)) {
+			txq->axq_link = NULL;
+			txq->axq_linkbuf = NULL;
+			spin_unlock_bh(&txq->axq_lock);
+			break;
+		}
+		bf = list_first_entry(&txq->axq_q, struct ath_buf, list);
+
+		/*
+		 * There is a race condition that a BH gets scheduled
+		 * after sw writes TxE and before hw re-load the last
+		 * descriptor to get the newly chained one.
+		 * Software must keep the last DONE descriptor as a
+		 * holding descriptor - software does so by marking
+		 * it with the STALE flag.
+		 */
+		bf_held = NULL;
+		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+			bf_held = bf;
+			if (list_is_last(&bf_held->list, &txq->axq_q)) {
+				/* FIXME:
+				 * The holding descriptor is the last
+				 * descriptor in queue. It's safe to remove
+				 * the last holding descriptor in BH context.
+				 */
+				spin_unlock_bh(&txq->axq_lock);
+				break;
+			} else {
+				/* Lets work with the next buffer now */
+				bf = list_entry(bf_held->list.next,
+					struct ath_buf, list);
+			}
+		}
+
+		lastbf = bf->bf_lastbf;
+		ds = lastbf->bf_desc;    /* NB: last decriptor */
+
+		status = ath9k_hw_txprocdesc(ah, ds);
+		if (status == -EINPROGRESS) {
+			spin_unlock_bh(&txq->axq_lock);
+			break;
+		}
+		if (bf->bf_desc == txq->axq_lastdsWithCTS)
+			txq->axq_lastdsWithCTS = NULL;
+		if (ds == txq->axq_gatingds)
+			txq->axq_gatingds = NULL;
+
+		/*
+		 * Remove ath_buf's of the same transmit unit from txq,
+		 * however leave the last descriptor back as the holding
+		 * descriptor for hw.
+		 */
+		lastbf->bf_status |= ATH_BUFSTATUS_STALE;
+		INIT_LIST_HEAD(&bf_head);
+
+		if (!list_is_singular(&lastbf->list))
+			list_cut_position(&bf_head,
+				&txq->axq_q, lastbf->list.prev);
+
+		txq->axq_depth--;
+
+		if (bf->bf_isaggr)
+			txq->axq_aggr_depth--;
+
+		txok = (ds->ds_txstat.ts_status == 0);
+
+		spin_unlock_bh(&txq->axq_lock);
+
+		if (bf_held) {
+			list_del(&bf_held->list);
+			spin_lock_bh(&sc->sc_txbuflock);
+			list_add_tail(&bf_held->list, &sc->sc_txbuf);
+			spin_unlock_bh(&sc->sc_txbuflock);
+		}
+
+		if (!bf->bf_isampdu) {
+			/*
+			 * This frame is sent out as a single frame.
+			 * Use hardware retry status for this frame.
+			 */
+			bf->bf_retries = ds->ds_txstat.ts_longretry;
+			if (ds->ds_txstat.ts_status & ATH9K_TXERR_XRETRY)
+				bf->bf_isxretried = 1;
+			nbad = 0;
+		} else {
+			nbad = ath_tx_num_badfrms(sc, bf, txok);
+		}
+		skb = bf->bf_mpdu;
+		tx_info = IEEE80211_SKB_CB(skb);
+		tx_info_priv = (struct ath_tx_info_priv *)
+			tx_info->driver_data[0];
+		if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT)
+			tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+		if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 &&
+				(bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) {
+			if (ds->ds_txstat.ts_status == 0)
+				nacked++;
+
+			if (bf->bf_isdata) {
+				if (isrifs)
+					tmp_ds = bf->bf_rifslast->bf_desc;
+				else
+					tmp_ds = ds;
+				memcpy(&tx_info_priv->tx,
+					&tmp_ds->ds_txstat,
+					sizeof(tx_info_priv->tx));
+				tx_info_priv->n_frames = bf->bf_nframes;
+				tx_info_priv->n_bad_frames = nbad;
+			}
+		}
+
+		/*
+		 * Complete this transmit unit
+		 */
+		if (bf->bf_isampdu)
+			ath_tx_complete_aggr_rifs(sc, txq, bf, &bf_head, txok);
+		else
+			ath_tx_complete_buf(sc, bf, &bf_head, txok, 0);
+
+		/* Wake up mac80211 queue */
+
+		spin_lock_bh(&txq->axq_lock);
+		if (txq->stopped && ath_txq_depth(sc, txq->axq_qnum) <=
+				(ATH_TXBUF - 20)) {
+			int qnum;
+			qnum = ath_get_mac80211_qnum(txq->axq_qnum, sc);
+			if (qnum != -1) {
+				ieee80211_wake_queue(sc->hw, qnum);
+				txq->stopped = 0;
+			}
+
+		}
+
+		/*
+		 * schedule any pending packets if aggregation is enabled
+		 */
+		if (sc->sc_txaggr)
+			ath_txq_schedule(sc, txq);
+		spin_unlock_bh(&txq->axq_lock);
+	}
+	return nacked;
+}
+
+static void ath_tx_stopdma(struct ath_softc *sc, struct ath_txq *txq)
+{
+	struct ath_hal *ah = sc->sc_ah;
+
+	(void) ath9k_hw_stoptxdma(ah, txq->axq_qnum);
+	DPRINTF(sc, ATH_DBG_XMIT, "%s: tx queue [%u] %x, link %p\n",
+		__func__, txq->axq_qnum,
+		ath9k_hw_gettxbuf(ah, txq->axq_qnum), txq->axq_link);
+}
+
+/* Drain only the data queues */
+
+static void ath_drain_txdataq(struct ath_softc *sc, bool retry_tx)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int i;
+	int npend = 0;
+	enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc);
+
+	/* XXX return value */
+	if (!sc->sc_invalid) {
+		for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+			if (ATH_TXQ_SETUP(sc, i)) {
+				ath_tx_stopdma(sc, &sc->sc_txq[i]);
+
+				/* The TxDMA may not really be stopped.
+				 * Double check the hal tx pending count */
+				npend += ath9k_hw_numtxpending(ah,
+					sc->sc_txq[i].axq_qnum);
+			}
+		}
+	}
+
+	if (npend) {
+		int status;
+
+		/* TxDMA not stopped, reset the hal */
+		DPRINTF(sc, ATH_DBG_XMIT,
+			"%s: Unable to stop TxDMA. Reset HAL!\n", __func__);
+
+		spin_lock_bh(&sc->sc_resetlock);
+		if (!ath9k_hw_reset(ah, sc->sc_opmode,
+			&sc->sc_curchan, ht_macmode,
+			sc->sc_tx_chainmask, sc->sc_rx_chainmask,
+			sc->sc_ht_extprotspacing, true, &status)) {
+
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: unable to reset hardware; hal status %u\n",
+				__func__,
+				status);
+		}
+		spin_unlock_bh(&sc->sc_resetlock);
+	}
+
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_draintxq(sc, &sc->sc_txq[i], retry_tx);
+	}
+}
+
+/* Add a sub-frame to block ack window */
+
+static void ath_tx_addto_baw(struct ath_softc *sc,
+			     struct ath_atx_tid *tid,
+			     struct ath_buf *bf)
+{
+	int index, cindex;
+
+	if (bf->bf_isretried)
+		return;
+
+	index  = ATH_BA_INDEX(tid->seq_start, bf->bf_seqno);
+	cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
+
+	ASSERT(tid->tx_buf[cindex] == NULL);
+	tid->tx_buf[cindex] = bf;
+
+	if (index >= ((tid->baw_tail - tid->baw_head) &
+		(ATH_TID_MAX_BUFS - 1))) {
+		tid->baw_tail = cindex;
+		INCR(tid->baw_tail, ATH_TID_MAX_BUFS);
+	}
+}
+
+/*
+ * Function to send an A-MPDU
+ * NB: must be called with txq lock held
+ */
+
+static int ath_tx_send_ampdu(struct ath_softc *sc,
+			     struct ath_txq *txq,
+			     struct ath_atx_tid *tid,
+			     struct list_head *bf_head,
+			     struct ath_tx_control *txctl)
+{
+	struct ath_buf *bf;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *tx_info;
+	struct ath_tx_info_priv *tx_info_priv;
+
+	BUG_ON(list_empty(bf_head));
+
+	bf = list_first_entry(bf_head, struct ath_buf, list);
+	bf->bf_isampdu = 1;
+	bf->bf_seqno = txctl->seqno; /* save seqno and tidno in buffer */
+	bf->bf_tidno = txctl->tidno;
+
+	/*
+	 * Do not queue to h/w when any of the following conditions is true:
+	 * - there are pending frames in software queue
+	 * - the TID is currently paused for ADDBA/BAR request
+	 * - seqno is not within block-ack window
+	 * - h/w queue depth exceeds low water mark
+	 */
+	if (!list_empty(&tid->buf_q) || tid->paused ||
+	    !BAW_WITHIN(tid->seq_start, tid->baw_size, bf->bf_seqno) ||
+	    txq->axq_depth >= ATH_AGGR_MIN_QDEPTH) {
+		/*
+		 * Add this frame to software queue for scheduling later
+		 * for aggregation.
+		 */
+		list_splice_tail_init(bf_head, &tid->buf_q);
+		ath_tx_queue_tid(txq, tid);
+		return 0;
+	}
+
+	skb = (struct sk_buff *)bf->bf_mpdu;
+	tx_info = IEEE80211_SKB_CB(skb);
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+	memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
+
+	/* Add sub-frame to BAW */
+	ath_tx_addto_baw(sc, tid, bf);
+
+	/* Queue to h/w without aggregation */
+	bf->bf_nframes = 1;
+	bf->bf_lastbf = bf->bf_lastfrm; /* one single frame */
+	ath_buf_set_rate(sc, bf);
+	ath_tx_txqaddbuf(sc, txq, bf_head);
+	return 0;
+}
+
+/*
+ * looks up the rate
+ * returns aggr limit based on lowest of the rates
+ */
+
+static u32 ath_lookup_rate(struct ath_softc *sc,
+				 struct ath_buf *bf)
+{
+	const struct ath9k_rate_table *rt = sc->sc_currates;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *tx_info;
+	struct ath_tx_info_priv *tx_info_priv;
+	u32 max_4ms_framelen, frame_length;
+	u16 aggr_limit, legacy = 0, maxampdu;
+	int i;
+
+
+	skb = (struct sk_buff *)bf->bf_mpdu;
+	tx_info = IEEE80211_SKB_CB(skb);
+	tx_info_priv = (struct ath_tx_info_priv *)
+		tx_info->driver_data[0];
+	memcpy(bf->bf_rcs,
+		tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
+
+	/*
+	 * Find the lowest frame length among the rate series that will have a
+	 * 4ms transmit duration.
+	 * TODO - TXOP limit needs to be considered.
+	 */
+	max_4ms_framelen = ATH_AMPDU_LIMIT_MAX;
+
+	for (i = 0; i < 4; i++) {
+		if (bf->bf_rcs[i].tries) {
+			frame_length = bf->bf_rcs[i].max_4ms_framelen;
+
+			if (rt->info[bf->bf_rcs[i].rix].phy != PHY_HT) {
+				legacy = 1;
+				break;
+			}
+
+			max_4ms_framelen = min(max_4ms_framelen, frame_length);
+		}
+	}
+
+	/*
+	 * limit aggregate size by the minimum rate if rate selected is
+	 * not a probe rate, if rate selected is a probe rate then
+	 * avoid aggregation of this packet.
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE || legacy)
+		return 0;
+
+	aggr_limit = min(max_4ms_framelen,
+		(u32)ATH_AMPDU_LIMIT_DEFAULT);
+
+	/*
+	 * h/w can accept aggregates upto 16 bit lengths (65535).
+	 * The IE, however can hold upto 65536, which shows up here
+	 * as zero. Ignore 65536 since we  are constrained by hw.
+	 */
+	maxampdu = sc->sc_ht_info.maxampdu;
+	if (maxampdu)
+		aggr_limit = min(aggr_limit, maxampdu);
+
+	return aggr_limit;
+}
+
+/*
+ * returns the number of delimiters to be added to
+ * meet the minimum required mpdudensity.
+ * caller should make sure that the rate is  HT rate .
+ */
+
+static int ath_compute_num_delims(struct ath_softc *sc,
+				  struct ath_buf *bf,
+				  u16 frmlen)
+{
+	const struct ath9k_rate_table *rt = sc->sc_currates;
+	u32 nsymbits, nsymbols, mpdudensity;
+	u16 minlen;
+	u8 rc, flags, rix;
+	int width, half_gi, ndelim, mindelim;
+
+	/* Select standard number of delimiters based on frame length alone */
+	ndelim = ATH_AGGR_GET_NDELIM(frmlen);
+
+	/*
+	 * If encryption enabled, hardware requires some more padding between
+	 * subframes.
+	 * TODO - this could be improved to be dependent on the rate.
+	 *      The hardware can keep up at lower rates, but not higher rates
+	 */
+	if (bf->bf_keytype != ATH9K_KEY_TYPE_CLEAR)
+		ndelim += ATH_AGGR_ENCRYPTDELIM;
+
+	/*
+	 * Convert desired mpdu density from microeconds to bytes based
+	 * on highest rate in rate series (i.e. first rate) to determine
+	 * required minimum length for subframe. Take into account
+	 * whether high rate is 20 or 40Mhz and half or full GI.
+	 */
+	mpdudensity = sc->sc_ht_info.mpdudensity;
+
+	/*
+	 * If there is no mpdu density restriction, no further calculation
+	 * is needed.
+	 */
+	if (mpdudensity == 0)
+		return ndelim;
+
+	rix = bf->bf_rcs[0].rix;
+	flags = bf->bf_rcs[0].flags;
+	rc = rt->info[rix].rateCode;
+	width = (flags & ATH_RC_CW40_FLAG) ? 1 : 0;
+	half_gi = (flags & ATH_RC_SGI_FLAG) ? 1 : 0;
+
+	if (half_gi)
+		nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(mpdudensity);
+	else
+		nsymbols = NUM_SYMBOLS_PER_USEC(mpdudensity);
+
+	if (nsymbols == 0)
+		nsymbols = 1;
+
+	nsymbits = bits_per_symbol[HT_RC_2_MCS(rc)][width];
+	minlen = (nsymbols * nsymbits) / BITS_PER_BYTE;
+
+	/* Is frame shorter than required minimum length? */
+	if (frmlen < minlen) {
+		/* Get the minimum number of delimiters required. */
+		mindelim = (minlen - frmlen) / ATH_AGGR_DELIM_SZ;
+		ndelim = max(mindelim, ndelim);
+	}
+
+	return ndelim;
+}
+
+/*
+ * For aggregation from software buffer queue.
+ * NB: must be called with txq lock held
+ */
+
+static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
+					struct ath_atx_tid *tid,
+					struct list_head *bf_q,
+					struct ath_buf **bf_last,
+					struct aggr_rifs_param *param,
+					int *prev_frames)
+{
+#define PADBYTES(_len) ((4 - ((_len) % 4)) % 4)
+	struct ath_buf *bf, *tbf, *bf_first, *bf_prev = NULL;
+	struct list_head bf_head;
+	int rl = 0, nframes = 0, ndelim;
+	u16 aggr_limit = 0, al = 0, bpad = 0,
+		al_delta, h_baw = tid->baw_size / 2;
+	enum ATH_AGGR_STATUS status = ATH_AGGR_DONE;
+	int prev_al = 0, is_ds_rate = 0;
+	INIT_LIST_HEAD(&bf_head);
+
+	BUG_ON(list_empty(&tid->buf_q));
+
+	bf_first = list_first_entry(&tid->buf_q, struct ath_buf, list);
+
+	do {
+		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
+
+		/*
+		 * do not step over block-ack window
+		 */
+		if (!BAW_WITHIN(tid->seq_start, tid->baw_size, bf->bf_seqno)) {
+			status = ATH_AGGR_BAW_CLOSED;
+			break;
+		}
+
+		if (!rl) {
+			aggr_limit = ath_lookup_rate(sc, bf);
+			rl = 1;
+			/*
+			 * Is rate dual stream
+			 */
+			is_ds_rate =
+				(bf->bf_rcs[0].flags & ATH_RC_DS_FLAG) ? 1 : 0;
+		}
+
+		/*
+		 * do not exceed aggregation limit
+		 */
+		al_delta = ATH_AGGR_DELIM_SZ + bf->bf_frmlen;
+
+		if (nframes && (aggr_limit <
+			(al + bpad + al_delta + prev_al))) {
+			status = ATH_AGGR_LIMITED;
+			break;
+		}
+
+		/*
+		 * do not exceed subframe limit
+		 */
+		if ((nframes + *prev_frames) >=
+		    min((int)h_baw, ATH_AMPDU_SUBFRAME_DEFAULT)) {
+			status = ATH_AGGR_LIMITED;
+			break;
+		}
+
+		/*
+		 * add padding for previous frame to aggregation length
+		 */
+		al += bpad + al_delta;
+
+		/*
+		 * Get the delimiters needed to meet the MPDU
+		 * density for this node.
+		 */
+		ndelim = ath_compute_num_delims(sc, bf_first, bf->bf_frmlen);
+
+		bpad = PADBYTES(al_delta) + (ndelim << 2);
+
+		bf->bf_next = NULL;
+		bf->bf_lastfrm->bf_desc->ds_link = 0;
+
+		/*
+		 * this packet is part of an aggregate
+		 * - remove all descriptors belonging to this frame from
+		 *   software queue
+		 * - add it to block ack window
+		 * - set up descriptors for aggregation
+		 */
+		list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list);
+		ath_tx_addto_baw(sc, tid, bf);
+
+		list_for_each_entry(tbf, &bf_head, list) {
+			ath9k_hw_set11n_aggr_middle(sc->sc_ah,
+				tbf->bf_desc, ndelim);
+		}
+
+		/*
+		 * link buffers of this frame to the aggregate
+		 */
+		list_splice_tail_init(&bf_head, bf_q);
+		nframes++;
+
+		if (bf_prev) {
+			bf_prev->bf_next = bf;
+			bf_prev->bf_lastfrm->bf_desc->ds_link = bf->bf_daddr;
+		}
+		bf_prev = bf;
+
+#ifdef AGGR_NOSHORT
+		/*
+		 * terminate aggregation on a small packet boundary
+		 */
+		if (bf->bf_frmlen < ATH_AGGR_MINPLEN) {
+			status = ATH_AGGR_SHORTPKT;
+			break;
+		}
+#endif
+	} while (!list_empty(&tid->buf_q));
+
+	bf_first->bf_al = al;
+	bf_first->bf_nframes = nframes;
+	*bf_last = bf_prev;
+	return status;
+#undef PADBYTES
+}
+
+/*
+ * process pending frames possibly doing a-mpdu aggregation
+ * NB: must be called with txq lock held
+ */
+
+static void ath_tx_sched_aggr(struct ath_softc *sc,
+	struct ath_txq *txq, struct ath_atx_tid *tid)
+{
+	struct ath_buf *bf, *tbf, *bf_last, *bf_lastaggr = NULL;
+	enum ATH_AGGR_STATUS status;
+	struct list_head bf_q;
+	struct aggr_rifs_param param = {0, 0, 0, 0, NULL};
+	int prev_frames = 0;
+
+	do {
+		if (list_empty(&tid->buf_q))
+			return;
+
+		INIT_LIST_HEAD(&bf_q);
+
+		status = ath_tx_form_aggr(sc, tid, &bf_q, &bf_lastaggr, &param,
+					  &prev_frames);
+
+		/*
+		 * no frames picked up to be aggregated; block-ack
+		 * window is not open
+		 */
+		if (list_empty(&bf_q))
+			break;
+
+		bf = list_first_entry(&bf_q, struct ath_buf, list);
+		bf_last = list_entry(bf_q.prev, struct ath_buf, list);
+		bf->bf_lastbf = bf_last;
+
+		/*
+		 * if only one frame, send as non-aggregate
+		 */
+		if (bf->bf_nframes == 1) {
+			ASSERT(bf->bf_lastfrm == bf_last);
+
+			bf->bf_isaggr = 0;
+			/*
+			 * clear aggr bits for every descriptor
+			 * XXX TODO: is there a way to optimize it?
+			 */
+			list_for_each_entry(tbf, &bf_q, list) {
+				ath9k_hw_clr11n_aggr(sc->sc_ah, tbf->bf_desc);
+			}
+
+			ath_buf_set_rate(sc, bf);
+			ath_tx_txqaddbuf(sc, txq, &bf_q);
+			continue;
+		}
+
+		/*
+		 * setup first desc with rate and aggr info
+		 */
+		bf->bf_isaggr  = 1;
+		ath_buf_set_rate(sc, bf);
+		ath9k_hw_set11n_aggr_first(sc->sc_ah, bf->bf_desc, bf->bf_al);
+
+		/*
+		 * anchor last frame of aggregate correctly
+		 */
+		ASSERT(bf_lastaggr);
+		ASSERT(bf_lastaggr->bf_lastfrm == bf_last);
+		tbf = bf_lastaggr;
+		ath9k_hw_set11n_aggr_last(sc->sc_ah, tbf->bf_desc);
+
+		/* XXX: We don't enter into this loop, consider removing this */
+		while (!list_empty(&bf_q) && !list_is_last(&tbf->list, &bf_q)) {
+			tbf = list_entry(tbf->list.next, struct ath_buf, list);
+			ath9k_hw_set11n_aggr_last(sc->sc_ah, tbf->bf_desc);
+		}
+
+		txq->axq_aggr_depth++;
+
+		/*
+		 * Normal aggregate, queue to hardware
+		 */
+		ath_tx_txqaddbuf(sc, txq, &bf_q);
+
+	} while (txq->axq_depth < ATH_AGGR_MIN_QDEPTH &&
+		 status != ATH_AGGR_BAW_CLOSED);
+}
+
+/* Called with txq lock held */
+
+static void ath_tid_drain(struct ath_softc *sc,
+			  struct ath_txq *txq,
+			  struct ath_atx_tid *tid,
+			  bool bh_flag)
+{
+	struct ath_buf *bf;
+	struct list_head bf_head;
+	INIT_LIST_HEAD(&bf_head);
+
+	for (;;) {
+		if (list_empty(&tid->buf_q))
+			break;
+		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
+
+		list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list);
+
+		/* update baw for software retried frame */
+		if (bf->bf_isretried)
+			ath_tx_update_baw(sc, tid, bf->bf_seqno);
+
+		/*
+		 * do not indicate packets while holding txq spinlock.
+		 * unlock is intentional here
+		 */
+		if (likely(bh_flag))
+			spin_unlock_bh(&txq->axq_lock);
+		else
+			spin_unlock(&txq->axq_lock);
+
+		/* complete this sub-frame */
+		ath_tx_complete_buf(sc, bf, &bf_head, 0, 0);
+
+		if (likely(bh_flag))
+			spin_lock_bh(&txq->axq_lock);
+		else
+			spin_lock(&txq->axq_lock);
+	}
+
+	/*
+	 * TODO: For frame(s) that are in the retry state, we will reuse the
+	 * sequence number(s) without setting the retry bit. The
+	 * alternative is to give up on these and BAR the receiver's window
+	 * forward.
+	 */
+	tid->seq_next = tid->seq_start;
+	tid->baw_tail = tid->baw_head;
+}
+
+/*
+ * Drain all pending buffers
+ * NB: must be called with txq lock held
+ */
+
+static void ath_txq_drain_pending_buffers(struct ath_softc *sc,
+					  struct ath_txq *txq,
+					  bool bh_flag)
+{
+	struct ath_atx_ac *ac, *ac_tmp;
+	struct ath_atx_tid *tid, *tid_tmp;
+
+	list_for_each_entry_safe(ac, ac_tmp, &txq->axq_acq, list) {
+		list_del(&ac->list);
+		ac->sched = false;
+		list_for_each_entry_safe(tid, tid_tmp, &ac->tid_q, list) {
+			list_del(&tid->list);
+			tid->sched = false;
+			ath_tid_drain(sc, txq, tid, bh_flag);
+		}
+	}
+}
+
+static int ath_tx_start_dma(struct ath_softc *sc,
+			    struct sk_buff *skb,
+			    struct scatterlist *sg,
+			    u32 n_sg,
+			    struct ath_tx_control *txctl)
+{
+	struct ath_node *an = txctl->an;
+	struct ath_buf *bf = NULL;
+	struct list_head bf_head;
+	struct ath_desc *ds;
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath_txq *txq = &sc->sc_txq[txctl->qnum];
+	struct ath_tx_info_priv *tx_info_priv;
+	struct ath_rc_series *rcs;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_tx_info *tx_info =  IEEE80211_SKB_CB(skb);
+	__le16 fc = hdr->frame_control;
+
+	/* For each sglist entry, allocate an ath_buf for DMA */
+	INIT_LIST_HEAD(&bf_head);
+	spin_lock_bh(&sc->sc_txbuflock);
+	if (unlikely(list_empty(&sc->sc_txbuf))) {
+		spin_unlock_bh(&sc->sc_txbuflock);
+		return -ENOMEM;
+	}
+
+	bf = list_first_entry(&sc->sc_txbuf, struct ath_buf, list);
+	list_del(&bf->list);
+	spin_unlock_bh(&sc->sc_txbuflock);
+
+	list_add_tail(&bf->list, &bf_head);
+
+	/* set up this buffer */
+	ATH_TXBUF_RESET(bf);
+	bf->bf_frmlen = txctl->frmlen;
+	bf->bf_isdata = ieee80211_is_data(fc);
+	bf->bf_isbar = ieee80211_is_back_req(fc);
+	bf->bf_ispspoll = ieee80211_is_pspoll(fc);
+	bf->bf_flags = txctl->flags;
+	bf->bf_shpreamble = sc->sc_flags & ATH_PREAMBLE_SHORT;
+	bf->bf_keytype = txctl->keytype;
+	tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+	rcs = tx_info_priv->rcs;
+	bf->bf_rcs[0] = rcs[0];
+	bf->bf_rcs[1] = rcs[1];
+	bf->bf_rcs[2] = rcs[2];
+	bf->bf_rcs[3] = rcs[3];
+	bf->bf_node = an;
+	bf->bf_mpdu = skb;
+	bf->bf_buf_addr = sg_dma_address(sg);
+
+	/* setup descriptor */
+	ds = bf->bf_desc;
+	ds->ds_link = 0;
+	ds->ds_data = bf->bf_buf_addr;
+
+	/*
+	 * Save the DMA context in the first ath_buf
+	 */
+	copy_dma_mem_context(get_dma_mem_context(bf, bf_dmacontext),
+			     get_dma_mem_context(txctl, dmacontext));
+
+	/*
+	 * Formulate first tx descriptor with tx controls.
+	 */
+	ath9k_hw_set11n_txdesc(ah,
+			       ds,
+			       bf->bf_frmlen, /* frame length */
+			       txctl->atype, /* Atheros packet type */
+			       min(txctl->txpower, (u16)60), /* txpower */
+			       txctl->keyix,            /* key cache index */
+			       txctl->keytype,          /* key type */
+			       txctl->flags);           /* flags */
+	ath9k_hw_filltxdesc(ah,
+			    ds,
+			    sg_dma_len(sg),     /* segment length */
+			    true,            /* first segment */
+			    (n_sg == 1) ? true : false, /* last segment */
+			    ds);                /* first descriptor */
+
+	bf->bf_lastfrm = bf;
+	bf->bf_ht = txctl->ht;
+
+	spin_lock_bh(&txq->axq_lock);
+
+	if (txctl->ht && sc->sc_txaggr) {
+		struct ath_atx_tid *tid = ATH_AN_2_TID(an, txctl->tidno);
+		if (ath_aggr_query(sc, an, txctl->tidno)) {
+			/*
+			 * Try aggregation if it's a unicast data frame
+			 * and the destination is HT capable.
+			 */
+			ath_tx_send_ampdu(sc, txq, tid, &bf_head, txctl);
+		} else {
+			/*
+			 * Send this frame as regular when ADDBA exchange
+			 * is neither complete nor pending.
+			 */
+			ath_tx_send_normal(sc, txq, tid, &bf_head);
+		}
+	} else {
+		bf->bf_lastbf = bf;
+		bf->bf_nframes = 1;
+		ath_buf_set_rate(sc, bf);
+
+		if (ieee80211_is_back_req(fc)) {
+			/* This is required for resuming tid
+			 * during BAR completion */
+			bf->bf_tidno = txctl->tidno;
+		}
+
+		if (is_multicast_ether_addr(hdr->addr1)) {
+			struct ath_vap *avp = sc->sc_vaps[txctl->if_id];
+
+			/*
+			 * When servicing one or more stations in power-save
+			 * mode (or) if there is some mcast data waiting on
+			 * mcast queue (to prevent out of order delivery of
+			 * mcast,bcast packets) multicast frames must be
+			 * buffered until after the beacon. We use the private
+			 * mcast queue for that.
+			 */
+			/* XXX? more bit in 802.11 frame header */
+			spin_lock_bh(&avp->av_mcastq.axq_lock);
+			if (txctl->ps || avp->av_mcastq.axq_depth)
+				ath_tx_mcastqaddbuf(sc,
+					&avp->av_mcastq, &bf_head);
+			else
+				ath_tx_txqaddbuf(sc, txq, &bf_head);
+			spin_unlock_bh(&avp->av_mcastq.axq_lock);
+		} else
+			ath_tx_txqaddbuf(sc, txq, &bf_head);
+	}
+	spin_unlock_bh(&txq->axq_lock);
+	return 0;
+}
+
+static void xmit_map_sg(struct ath_softc *sc,
+			struct sk_buff *skb,
+			dma_addr_t *pa,
+			struct ath_tx_control *txctl)
+{
+	struct ath_xmit_status tx_status;
+	struct ath_atx_tid *tid;
+	struct scatterlist sg;
+
+	*pa = pci_map_single(sc->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
+
+	/* setup S/G list */
+	memset(&sg, 0, sizeof(struct scatterlist));
+	sg_dma_address(&sg) = *pa;
+	sg_dma_len(&sg) = skb->len;
+
+	if (ath_tx_start_dma(sc, skb, &sg, 1, txctl) != 0) {
+		/*
+		 *  We have to do drop frame here.
+		 */
+		pci_unmap_single(sc->pdev, *pa, skb->len, PCI_DMA_TODEVICE);
+
+		tx_status.retries = 0;
+		tx_status.flags = ATH_TX_ERROR;
+
+		if (txctl->ht && sc->sc_txaggr) {
+			/* Reclaim the seqno. */
+			tid = ATH_AN_2_TID((struct ath_node *)
+				txctl->an, txctl->tidno);
+			DECR(tid->seq_next, IEEE80211_SEQ_MAX);
+		}
+		ath_tx_complete(sc, skb, &tx_status, txctl->an);
+	}
+}
+
+/* Initialize TX queue and h/w */
+
+int ath_tx_init(struct ath_softc *sc, int nbufs)
+{
+	int error = 0;
+
+	do {
+		spin_lock_init(&sc->sc_txbuflock);
+
+		/* Setup tx descriptors */
+		error = ath_descdma_setup(sc, &sc->sc_txdma, &sc->sc_txbuf,
+			"tx", nbufs * ATH_FRAG_PER_MSDU, ATH_TXDESC);
+		if (error != 0) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: failed to allocate tx descriptors: %d\n",
+				__func__, error);
+			break;
+		}
+
+		/* XXX allocate beacon state together with vap */
+		error = ath_descdma_setup(sc, &sc->sc_bdma, &sc->sc_bbuf,
+					  "beacon", ATH_BCBUF, 1);
+		if (error != 0) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: failed to allocate "
+				"beacon descripotrs: %d\n",
+				__func__, error);
+			break;
+		}
+
+	} while (0);
+
+	if (error != 0)
+		ath_tx_cleanup(sc);
+
+	return error;
+}
+
+/* Reclaim all tx queue resources */
+
+int ath_tx_cleanup(struct ath_softc *sc)
+{
+	/* cleanup beacon descriptors */
+	if (sc->sc_bdma.dd_desc_len != 0)
+		ath_descdma_cleanup(sc, &sc->sc_bdma, &sc->sc_bbuf);
+
+	/* cleanup tx descriptors */
+	if (sc->sc_txdma.dd_desc_len != 0)
+		ath_descdma_cleanup(sc, &sc->sc_txdma, &sc->sc_txbuf);
+
+	return 0;
+}
+
+/* Setup a h/w transmit queue */
+
+struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	struct ath9k_tx_queue_info qi;
+	int qnum;
+
+	memzero(&qi, sizeof(qi));
+	qi.tqi_subtype = subtype;
+	qi.tqi_aifs = ATH9K_TXQ_USEDEFAULT;
+	qi.tqi_cwmin = ATH9K_TXQ_USEDEFAULT;
+	qi.tqi_cwmax = ATH9K_TXQ_USEDEFAULT;
+	qi.tqi_physCompBuf = 0;
+
+	/*
+	 * Enable interrupts only for EOL and DESC conditions.
+	 * We mark tx descriptors to receive a DESC interrupt
+	 * when a tx queue gets deep; otherwise waiting for the
+	 * EOL to reap descriptors.  Note that this is done to
+	 * reduce interrupt load and this only defers reaping
+	 * descriptors, never transmitting frames.  Aside from
+	 * reducing interrupts this also permits more concurrency.
+	 * The only potential downside is if the tx queue backs
+	 * up in which case the top half of the kernel may backup
+	 * due to a lack of tx descriptors.
+	 *
+	 * The UAPSD queue is an exception, since we take a desc-
+	 * based intr on the EOSP frames.
+	 */
+	if (qtype == ATH9K_TX_QUEUE_UAPSD)
+		qi.tqi_qflags = TXQ_FLAG_TXDESCINT_ENABLE;
+	else
+		qi.tqi_qflags = TXQ_FLAG_TXEOLINT_ENABLE |
+			TXQ_FLAG_TXDESCINT_ENABLE;
+	qnum = ath9k_hw_setuptxqueue(ah, qtype, &qi);
+	if (qnum == -1) {
+		/*
+		 * NB: don't print a message, this happens
+		 * normally on parts with too few tx queues
+		 */
+		return NULL;
+	}
+	if (qnum >= ARRAY_SIZE(sc->sc_txq)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: hal qnum %u out of range, max %u!\n",
+			__func__, qnum, (unsigned int)ARRAY_SIZE(sc->sc_txq));
+		ath9k_hw_releasetxqueue(ah, qnum);
+		return NULL;
+	}
+	if (!ATH_TXQ_SETUP(sc, qnum)) {
+		struct ath_txq *txq = &sc->sc_txq[qnum];
+
+		txq->axq_qnum = qnum;
+		txq->axq_link = NULL;
+		INIT_LIST_HEAD(&txq->axq_q);
+		INIT_LIST_HEAD(&txq->axq_acq);
+		spin_lock_init(&txq->axq_lock);
+		txq->axq_depth = 0;
+		txq->axq_aggr_depth = 0;
+		txq->axq_totalqueued = 0;
+		txq->axq_intrcnt = 0;
+		txq->axq_linkbuf = NULL;
+		sc->sc_txqsetup |= 1<<qnum;
+	}
+	return &sc->sc_txq[qnum];
+}
+
+/* Reclaim resources for a setup queue */
+
+void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq)
+{
+	ath9k_hw_releasetxqueue(sc->sc_ah, txq->axq_qnum);
+	sc->sc_txqsetup &= ~(1<<txq->axq_qnum);
+}
+
+/*
+ * Setup a hardware data transmit queue for the specified
+ * access control.  The hal may not support all requested
+ * queues in which case it will return a reference to a
+ * previously setup queue.  We record the mapping from ac's
+ * to h/w queues for use by ath_tx_start and also track
+ * the set of h/w queues being used to optimize work in the
+ * transmit interrupt handler and related routines.
+ */
+
+int ath_tx_setup(struct ath_softc *sc, int haltype)
+{
+	struct ath_txq *txq;
+
+	if (haltype >= ARRAY_SIZE(sc->sc_haltype2q)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: HAL AC %u out of range, max %zu!\n",
+			__func__, haltype, ARRAY_SIZE(sc->sc_haltype2q));
+		return 0;
+	}
+	txq = ath_txq_setup(sc, ATH9K_TX_QUEUE_DATA, haltype);
+	if (txq != NULL) {
+		sc->sc_haltype2q[haltype] = txq->axq_qnum;
+		return 1;
+	} else
+		return 0;
+}
+
+int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype)
+{
+	int qnum;
+
+	switch (qtype) {
+	case ATH9K_TX_QUEUE_DATA:
+		if (haltype >= ARRAY_SIZE(sc->sc_haltype2q)) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"%s: HAL AC %u out of range, max %zu!\n",
+				__func__,
+				haltype, ARRAY_SIZE(sc->sc_haltype2q));
+			return -1;
+		}
+		qnum = sc->sc_haltype2q[haltype];
+		break;
+	case ATH9K_TX_QUEUE_BEACON:
+		qnum = sc->sc_bhalq;
+		break;
+	case ATH9K_TX_QUEUE_CAB:
+		qnum = sc->sc_cabq->axq_qnum;
+		break;
+	default:
+		qnum = -1;
+	}
+	return qnum;
+}
+
+/* Update parameters for a transmit queue */
+
+int ath_txq_update(struct ath_softc *sc, int qnum,
+		   struct ath9k_tx_queue_info *qinfo)
+{
+	struct ath_hal *ah = sc->sc_ah;
+	int error = 0;
+	struct ath9k_tx_queue_info qi;
+
+	if (qnum == sc->sc_bhalq) {
+		/*
+		 * XXX: for beacon queue, we just save the parameter.
+		 * It will be picked up by ath_beaconq_config when
+		 * it's necessary.
+		 */
+		sc->sc_beacon_qi = *qinfo;
+		return 0;
+	}
+
+	ASSERT(sc->sc_txq[qnum].axq_qnum == qnum);
+
+	ath9k_hw_get_txq_props(ah, qnum, &qi);
+	qi.tqi_aifs = qinfo->tqi_aifs;
+	qi.tqi_cwmin = qinfo->tqi_cwmin;
+	qi.tqi_cwmax = qinfo->tqi_cwmax;
+	qi.tqi_burstTime = qinfo->tqi_burstTime;
+	qi.tqi_readyTime = qinfo->tqi_readyTime;
+
+	if (!ath9k_hw_set_txq_props(ah, qnum, &qi)) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"%s: unable to update hardware queue %u!\n",
+			__func__, qnum);
+		error = -EIO;
+	} else {
+		ath9k_hw_resettxqueue(ah, qnum); /* push to h/w */
+	}
+
+	return error;
+}
+
+int ath_cabq_update(struct ath_softc *sc)
+{
+	struct ath9k_tx_queue_info qi;
+	int qnum = sc->sc_cabq->axq_qnum;
+	struct ath_beacon_config conf;
+
+	ath9k_hw_get_txq_props(sc->sc_ah, qnum, &qi);
+	/*
+	 * Ensure the readytime % is within the bounds.
+	 */
+	if (sc->sc_config.cabqReadytime < ATH9K_READY_TIME_LO_BOUND)
+		sc->sc_config.cabqReadytime = ATH9K_READY_TIME_LO_BOUND;
+	else if (sc->sc_config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
+		sc->sc_config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
+
+	ath_get_beaconconfig(sc, ATH_IF_ID_ANY, &conf);
+	qi.tqi_readyTime =
+		(conf.beacon_interval * sc->sc_config.cabqReadytime) / 100;
+	ath_txq_update(sc, qnum, &qi);
+
+	return 0;
+}
+
+int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb)
+{
+	struct ath_tx_control txctl;
+	int error = 0;
+
+	error = ath_tx_prepare(sc, skb, &txctl);
+	if (error == 0)
+		/*
+		 * Start DMA mapping.
+		 * ath_tx_start_dma() will be called either synchronously
+		 * or asynchrounsly once DMA is complete.
+		 */
+		xmit_map_sg(sc, skb,
+			    get_dma_mem_context(&txctl, dmacontext),
+			    &txctl);
+	else
+		ath_node_put(sc, txctl.an, ATH9K_BH_STATUS_CHANGE);
+
+	/* failed packets will be dropped by the caller */
+	return error;
+}
+
+/* Deferred processing of transmit interrupt */
+
+void ath_tx_tasklet(struct ath_softc *sc)
+{
+	u64 tsf = ath9k_hw_gettsf64(sc->sc_ah);
+	int i, nacked = 0;
+	u32 qcumask = ((1 << ATH9K_NUM_TX_QUEUES) - 1);
+
+	ath9k_hw_gettxintrtxqs(sc->sc_ah, &qcumask);
+
+	/*
+	 * Process each active queue.
+	 */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+		if (ATH_TXQ_SETUP(sc, i) && (qcumask & (1 << i)))
+			nacked += ath_tx_processq(sc, &sc->sc_txq[i]);
+	}
+	if (nacked)
+		sc->sc_lastrx = tsf;
+}
+
+void ath_tx_draintxq(struct ath_softc *sc,
+	struct ath_txq *txq, bool retry_tx)
+{
+	struct ath_buf *bf, *lastbf;
+	struct list_head bf_head;
+
+	INIT_LIST_HEAD(&bf_head);
+
+	/*
+	 * NB: this assumes output has been stopped and
+	 *     we do not need to block ath_tx_tasklet
+	 */
+	for (;;) {
+		spin_lock_bh(&txq->axq_lock);
+
+		if (list_empty(&txq->axq_q)) {
+			txq->axq_link = NULL;
+			txq->axq_linkbuf = NULL;
+			spin_unlock_bh(&txq->axq_lock);
+			break;
+		}
+
+		bf = list_first_entry(&txq->axq_q, struct ath_buf, list);
+
+		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+			list_del(&bf->list);
+			spin_unlock_bh(&txq->axq_lock);
+
+			spin_lock_bh(&sc->sc_txbuflock);
+			list_add_tail(&bf->list, &sc->sc_txbuf);
+			spin_unlock_bh(&sc->sc_txbuflock);
+			continue;
+		}
+
+		lastbf = bf->bf_lastbf;
+		if (!retry_tx)
+			lastbf->bf_desc->ds_txstat.ts_flags =
+				ATH9K_TX_SW_ABORTED;
+
+		/* remove ath_buf's of the same mpdu from txq */
+		list_cut_position(&bf_head, &txq->axq_q, &lastbf->list);
+		txq->axq_depth--;
+
+		spin_unlock_bh(&txq->axq_lock);
+
+		if (bf->bf_isampdu)
+			ath_tx_complete_aggr_rifs(sc, txq, bf, &bf_head, 0);
+		else
+			ath_tx_complete_buf(sc, bf, &bf_head, 0, 0);
+	}
+
+	/* flush any pending frames if aggregation is enabled */
+	if (sc->sc_txaggr) {
+		if (!retry_tx) {
+			spin_lock_bh(&txq->axq_lock);
+			ath_txq_drain_pending_buffers(sc, txq,
+				ATH9K_BH_STATUS_CHANGE);
+			spin_unlock_bh(&txq->axq_lock);
+		}
+	}
+}
+
+/* Drain the transmit queues and reclaim resources */
+
+void ath_draintxq(struct ath_softc *sc, bool retry_tx)
+{
+	/* stop beacon queue. The beacon will be freed when
+	 * we go to INIT state */
+	if (!sc->sc_invalid) {
+		(void) ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq);
+		DPRINTF(sc, ATH_DBG_XMIT, "%s: beacon queue %x\n", __func__,
+			ath9k_hw_gettxbuf(sc->sc_ah, sc->sc_bhalq));
+	}
+
+	ath_drain_txdataq(sc, retry_tx);
+}
+
+u32 ath_txq_depth(struct ath_softc *sc, int qnum)
+{
+	return sc->sc_txq[qnum].axq_depth;
+}
+
+u32 ath_txq_aggr_depth(struct ath_softc *sc, int qnum)
+{
+	return sc->sc_txq[qnum].axq_aggr_depth;
+}
+
+/* Check if an ADDBA is required. A valid node must be passed. */
+enum ATH_AGGR_CHECK ath_tx_aggr_check(struct ath_softc *sc,
+				      struct ath_node *an,
+				      u8 tidno)
+{
+	struct ath_atx_tid *txtid;
+	DECLARE_MAC_BUF(mac);
+
+	if (!sc->sc_txaggr)
+		return AGGR_NOT_REQUIRED;
+
+	/* ADDBA exchange must be completed before sending aggregates */
+	txtid = ATH_AN_2_TID(an, tidno);
+
+	if (txtid->addba_exchangecomplete)
+		return AGGR_EXCHANGE_DONE;
+
+	if (txtid->cleanup_inprogress)
+		return AGGR_CLEANUP_PROGRESS;
+
+	if (txtid->addba_exchangeinprogress)
+		return AGGR_EXCHANGE_PROGRESS;
+
+	if (!txtid->addba_exchangecomplete) {
+		if (!txtid->addba_exchangeinprogress &&
+		    (txtid->addba_exchangeattempts < ADDBA_EXCHANGE_ATTEMPTS)) {
+			txtid->addba_exchangeattempts++;
+			return AGGR_REQUIRED;
+		}
+	}
+
+	return AGGR_NOT_REQUIRED;
+}
+
+/* Start TX aggregation */
+
+int ath_tx_aggr_start(struct ath_softc *sc,
+		      const u8 *addr,
+		      u16 tid,
+		      u16 *ssn)
+{
+	struct ath_atx_tid *txtid;
+	struct ath_node *an;
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, (u8 *) addr);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (!an) {
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: Node not found to initialize "
+			"TX aggregation\n", __func__);
+		return -1;
+	}
+
+	if (sc->sc_txaggr) {
+		txtid = ATH_AN_2_TID(an, tid);
+		txtid->addba_exchangeinprogress = 1;
+		ath_tx_pause_tid(sc, txtid);
+	}
+
+	return 0;
+}
+
+/* Stop tx aggregation */
+
+int ath_tx_aggr_stop(struct ath_softc *sc,
+		     const u8 *addr,
+		     u16 tid)
+{
+	struct ath_node *an;
+
+	spin_lock_bh(&sc->node_lock);
+	an = ath_node_find(sc, (u8 *) addr);
+	spin_unlock_bh(&sc->node_lock);
+
+	if (!an) {
+		DPRINTF(sc, ATH_DBG_AGGR,
+			"%s: TX aggr stop for non-existent node\n", __func__);
+		return -1;
+	}
+
+	ath_tx_aggr_teardown(sc, an, tid);
+	return 0;
+}
+
+/*
+ * Performs transmit side cleanup when TID changes from aggregated to
+ * unaggregated.
+ * - Pause the TID and mark cleanup in progress
+ * - Discard all retry frames from the s/w queue.
+ */
+
+void ath_tx_aggr_teardown(struct ath_softc *sc,
+	struct ath_node *an, u8 tid)
+{
+	struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid);
+	struct ath_txq *txq = &sc->sc_txq[txtid->ac->qnum];
+	struct ath_buf *bf;
+	struct list_head bf_head;
+	INIT_LIST_HEAD(&bf_head);
+
+	DPRINTF(sc, ATH_DBG_AGGR, "%s: teardown TX aggregation\n", __func__);
+
+	if (txtid->cleanup_inprogress) /* cleanup is in progress */
+		return;
+
+	if (!txtid->addba_exchangecomplete) {
+		txtid->addba_exchangeattempts = 0;
+		return;
+	}
+
+	/* TID must be paused first */
+	ath_tx_pause_tid(sc, txtid);
+
+	/* drop all software retried frames and mark this TID */
+	spin_lock_bh(&txq->axq_lock);
+	while (!list_empty(&txtid->buf_q)) {
+		bf = list_first_entry(&txtid->buf_q, struct ath_buf, list);
+		if (!bf->bf_isretried) {
+			/*
+			 * NB: it's based on the assumption that
+			 * software retried frame will always stay
+			 * at the head of software queue.
+			 */
+			break;
+		}
+		list_cut_position(&bf_head,
+			&txtid->buf_q, &bf->bf_lastfrm->list);
+		ath_tx_update_baw(sc, txtid, bf->bf_seqno);
+
+		/* complete this sub-frame */
+		ath_tx_complete_buf(sc, bf, &bf_head, 0, 0);
+	}
+
+	if (txtid->baw_head != txtid->baw_tail) {
+		spin_unlock_bh(&txq->axq_lock);
+		txtid->cleanup_inprogress = true;
+	} else {
+		txtid->addba_exchangecomplete = 0;
+		txtid->addba_exchangeattempts = 0;
+		spin_unlock_bh(&txq->axq_lock);
+		ath_tx_flush_tid(sc, txtid);
+	}
+}
+
+/*
+ * Tx scheduling logic
+ * NB: must be called with txq lock held
+ */
+
+void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq)
+{
+	struct ath_atx_ac *ac;
+	struct ath_atx_tid *tid;
+
+	/* nothing to schedule */
+	if (list_empty(&txq->axq_acq))
+		return;
+	/*
+	 * get the first node/ac pair on the queue
+	 */
+	ac = list_first_entry(&txq->axq_acq, struct ath_atx_ac, list);
+	list_del(&ac->list);
+	ac->sched = false;
+
+	/*
+	 * process a single tid per destination
+	 */
+	do {
+		/* nothing to schedule */
+		if (list_empty(&ac->tid_q))
+			return;
+
+		tid = list_first_entry(&ac->tid_q, struct ath_atx_tid, list);
+		list_del(&tid->list);
+		tid->sched = false;
+
+		if (tid->paused)    /* check next tid to keep h/w busy */
+			continue;
+
+		if (!(tid->an->an_smmode == ATH_SM_PWRSAV_DYNAMIC) ||
+		    ((txq->axq_depth % 2) == 0)) {
+			ath_tx_sched_aggr(sc, txq, tid);
+		}
+
+		/*
+		 * add tid to round-robin queue if more frames
+		 * are pending for the tid
+		 */
+		if (!list_empty(&tid->buf_q))
+			ath_tx_queue_tid(txq, tid);
+
+		/* only schedule one TID at a time */
+		break;
+	} while (!list_empty(&ac->tid_q));
+
+	/*
+	 * schedule AC if more TIDs need processing
+	 */
+	if (!list_empty(&ac->tid_q)) {
+		/*
+		 * add dest ac to txq if not already added
+		 */
+		if (!ac->sched) {
+			ac->sched = true;
+			list_add_tail(&ac->list, &txq->axq_acq);
+		}
+	}
+}
+
+/* Initialize per-node transmit state */
+
+void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an)
+{
+	if (sc->sc_txaggr) {
+		struct ath_atx_tid *tid;
+		struct ath_atx_ac *ac;
+		int tidno, acno;
+
+		sc->sc_ht_info.maxampdu = ATH_AMPDU_LIMIT_DEFAULT;
+
+		/*
+		 * Init per tid tx state
+		 */
+		for (tidno = 0, tid = &an->an_aggr.tx.tid[tidno];
+				tidno < WME_NUM_TID;
+				tidno++, tid++) {
+			tid->an        = an;
+			tid->tidno     = tidno;
+			tid->seq_start = tid->seq_next = 0;
+			tid->baw_size  = WME_MAX_BA;
+			tid->baw_head  = tid->baw_tail = 0;
+			tid->sched     = false;
+			tid->paused = false;
+			tid->cleanup_inprogress = false;
+			INIT_LIST_HEAD(&tid->buf_q);
+
+			acno = TID_TO_WME_AC(tidno);
+			tid->ac = &an->an_aggr.tx.ac[acno];
+
+			/* ADDBA state */
+			tid->addba_exchangecomplete     = 0;
+			tid->addba_exchangeinprogress   = 0;
+			tid->addba_exchangeattempts     = 0;
+		}
+
+		/*
+		 * Init per ac tx state
+		 */
+		for (acno = 0, ac = &an->an_aggr.tx.ac[acno];
+				acno < WME_NUM_AC; acno++, ac++) {
+			ac->sched    = false;
+			INIT_LIST_HEAD(&ac->tid_q);
+
+			switch (acno) {
+			case WME_AC_BE:
+				ac->qnum = ath_tx_get_qnum(sc,
+					ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
+				break;
+			case WME_AC_BK:
+				ac->qnum = ath_tx_get_qnum(sc,
+					ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BK);
+				break;
+			case WME_AC_VI:
+				ac->qnum = ath_tx_get_qnum(sc,
+					ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_VI);
+				break;
+			case WME_AC_VO:
+				ac->qnum = ath_tx_get_qnum(sc,
+					ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_VO);
+				break;
+			}
+		}
+	}
+}
+
+/* Cleanupthe pending buffers for the node. */
+
+void ath_tx_node_cleanup(struct ath_softc *sc,
+	struct ath_node *an, bool bh_flag)
+{
+	int i;
+	struct ath_atx_ac *ac, *ac_tmp;
+	struct ath_atx_tid *tid, *tid_tmp;
+	struct ath_txq *txq;
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+		if (ATH_TXQ_SETUP(sc, i)) {
+			txq = &sc->sc_txq[i];
+
+			if (likely(bh_flag))
+				spin_lock_bh(&txq->axq_lock);
+			else
+				spin_lock(&txq->axq_lock);
+
+			list_for_each_entry_safe(ac,
+					ac_tmp, &txq->axq_acq, list) {
+				tid = list_first_entry(&ac->tid_q,
+						struct ath_atx_tid, list);
+				if (tid && tid->an != an)
+					continue;
+				list_del(&ac->list);
+				ac->sched = false;
+
+				list_for_each_entry_safe(tid,
+						tid_tmp, &ac->tid_q, list) {
+					list_del(&tid->list);
+					tid->sched = false;
+					ath_tid_drain(sc, txq, tid, bh_flag);
+					tid->addba_exchangecomplete = 0;
+					tid->addba_exchangeattempts = 0;
+					tid->cleanup_inprogress = false;
+				}
+			}
+
+			if (likely(bh_flag))
+				spin_unlock_bh(&txq->axq_lock);
+			else
+				spin_unlock(&txq->axq_lock);
+		}
+	}
+}
+
+/* Cleanup per node transmit state */
+
+void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an)
+{
+	if (sc->sc_txaggr) {
+		struct ath_atx_tid *tid;
+		int tidno, i;
+
+		/* Init per tid rx state */
+		for (tidno = 0, tid = &an->an_aggr.tx.tid[tidno];
+			tidno < WME_NUM_TID;
+		     tidno++, tid++) {
+
+			for (i = 0; i < ATH_TID_MAX_BUFS; i++)
+				ASSERT(tid->tx_buf[i] == NULL);
+		}
+	}
+}
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index bd35bb0a148..bd65c485098 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -1304,7 +1304,7 @@ EXPORT_SYMBOL(atmel_open);
 int atmel_open(struct net_device *dev)
 {
 	struct atmel_private *priv = netdev_priv(dev);
-	int i, channel;
+	int i, channel, err;
 
 	/* any scheduled timer is no longer needed and might screw things up.. */
 	del_timer_sync(&priv->management_timer);
@@ -1328,8 +1328,9 @@ int atmel_open(struct net_device *dev)
 	priv->site_survey_state = SITE_SURVEY_IDLE;
 	priv->station_is_associated = 0;
 
-	if (!reset_atmel_card(dev))
-		return -EAGAIN;
+	err = reset_atmel_card(dev);
+	if (err)
+		return err;
 
 	if (priv->config_reg_domain) {
 		priv->reg_domain = priv->config_reg_domain;
@@ -3061,12 +3062,20 @@ static void authenticate(struct atmel_private *priv, u16 frame_len)
 	}
 
 	if (status == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) {
-		/* Do opensystem first, then try sharedkey */
+		/* Flip back and forth between WEP auth modes until the max
+		 * authentication tries has been exceeded.
+		 */
 		if (system == WLAN_AUTH_OPEN) {
 			priv->CurrentAuthentTransactionSeqNum = 0x001;
 			priv->exclude_unencrypted = 1;
 			send_authentication_request(priv, WLAN_AUTH_SHARED_KEY, NULL, 0);
 			return;
+		} else if (   system == WLAN_AUTH_SHARED_KEY
+		           && priv->wep_is_on) {
+			priv->CurrentAuthentTransactionSeqNum = 0x001;
+			priv->exclude_unencrypted = 0;
+			send_authentication_request(priv, WLAN_AUTH_OPEN, NULL, 0);
+			return;
 		} else if (priv->connect_to_any_BSS) {
 			int bss_index;
 
@@ -3580,12 +3589,12 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
 
 	if (i == 0) {
 		printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 
 	if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) {
 		printk(KERN_ALERT "%s: card missing.\n", priv->dev->name);
-		return 0;
+		return -ENODEV;
 	}
 
 	/* now check for completion of MAC initialization through
@@ -3609,19 +3618,19 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
 	if (i == 0) {
 		printk(KERN_ALERT "%s: MAC failed to initialise.\n",
 				priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 
 	/* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */
 	if ((mr3 & MAC_INIT_COMPLETE) &&
 	    !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) {
 		printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 	if ((mr1 & MAC_INIT_COMPLETE) &&
 	    !(atmel_read16(priv->dev, MR1) & MAC_INIT_OK)) {
 		printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 
 	atmel_copy_to_host(priv->dev, (unsigned char *)iface,
@@ -3642,7 +3651,7 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
 	iface->func_ctrl = le16_to_cpu(iface->func_ctrl);
 	iface->mac_status = le16_to_cpu(iface->mac_status);
 
-	return 1;
+	return 0;
 }
 
 /* determine type of memory and MAC address */
@@ -3693,7 +3702,7 @@ static int probe_atmel_card(struct net_device *dev)
 		/* Standard firmware in flash, boot it up and ask
 		   for the Mac Address */
 		priv->card_type = CARD_TYPE_SPI_FLASH;
-		if (atmel_wakeup_firmware(priv)) {
+		if (atmel_wakeup_firmware(priv) == 0) {
 			atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6);
 
 			/* got address, now squash it again until the network
@@ -3835,6 +3844,7 @@ static int reset_atmel_card(struct net_device *dev)
 	struct atmel_private *priv = netdev_priv(dev);
 	u8 configuration;
 	int old_state = priv->station_state;
+	int err = 0;
 
 	/* data to add to the firmware names, in priority order
 	   this implemenents firmware versioning */
@@ -3868,11 +3878,12 @@ static int reset_atmel_card(struct net_device *dev)
 					       dev->name);
 					strcpy(priv->firmware_id, "atmel_at76c502.bin");
 				}
-				if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) {
+				err = request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev);
+				if (err != 0) {
 					printk(KERN_ALERT
 					       "%s: firmware %s is missing, cannot continue.\n",
 					       dev->name, priv->firmware_id);
-					return 0;
+					return err;
 				}
 			} else {
 				int fw_index = 0;
@@ -3901,7 +3912,7 @@ static int reset_atmel_card(struct net_device *dev)
 					       "%s: firmware %s is missing, cannot start.\n",
 					       dev->name, priv->firmware_id);
 					priv->firmware_id[0] = '\0';
-					return 0;
+					return -ENOENT;
 				}
 			}
 
@@ -3926,8 +3937,9 @@ static int reset_atmel_card(struct net_device *dev)
 			release_firmware(fw_entry);
 	}
 
-	if (!atmel_wakeup_firmware(priv))
-		return 0;
+	err = atmel_wakeup_firmware(priv);
+	if (err != 0)
+		return err;
 
 	/* Check the version and set the correct flag for wpa stuff,
 	   old and new firmware is incompatible.
@@ -3968,10 +3980,9 @@ static int reset_atmel_card(struct net_device *dev)
 	if (!priv->radio_on_broken) {
 		if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
 		    CMD_STATUS_REJECTED_RADIO_OFF) {
-			printk(KERN_INFO
-			       "%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n",
+			printk(KERN_INFO "%s: cannot turn the radio on.\n",
 			       dev->name);
-                        return 0;
+                        return -EIO;
 		}
 	}
 
@@ -4006,7 +4017,7 @@ static int reset_atmel_card(struct net_device *dev)
 		wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
 	}
 
-	return 1;
+	return 0;
 }
 
 static void atmel_send_command(struct atmel_private *priv, int command,
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index e78319aa47c..7205a936ec7 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -33,7 +33,6 @@
 #include <linux/moduleparam.h>
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
-#include <linux/version.h>
 #include <linux/firmware.h>
 #include <linux/wireless.h>
 #include <linux/workqueue.h>
@@ -4615,7 +4614,9 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
 		pdev = bus->host_pci;
 		if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
+		    IS_PDEV(pdev, BROADCOM, 0x4320,    DELL, 0x0003) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
+		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
 			bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
 	}
@@ -4645,8 +4646,7 @@ static int b43_wireless_init(struct ssb_device *dev)
 	}
 
 	/* fill hw info */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_RX_INCLUDES_FCS |
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index fec5645944a..34ae125d538 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -43,23 +43,6 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
 	return 0;
 }
 
-/* Update the rfkill state */
-static void b43_rfkill_update_state(struct b43_wldev *dev)
-{
-	struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!dev->radio_hw_enable) {
-		rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
-		return;
-	}
-
-	if (!dev->phy.radio_on)
-		rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
-	else
-		rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
 /* The poll callback for the hardware button. */
 static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
 {
@@ -77,7 +60,6 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
 		report_change = 1;
-		b43_rfkill_update_state(dev);
 		b43info(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
 	}
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 8d54502222a..9dda8169f7c 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -192,7 +192,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
 	const struct b43_phy *phy = &dev->phy;
 	const struct ieee80211_hdr *wlhdr =
 	    (const struct ieee80211_hdr *)fragment_data;
-	int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
+	int use_encryption = !!info->control.hw_key;
 	__le16 fctl = wlhdr->frame_control;
 	struct ieee80211_rate *fbrate;
 	u8 rate, rate_fb;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index a1b8bf3ee73..1cb77db5c29 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -34,7 +34,6 @@
 #include <linux/moduleparam.h>
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
-#include <linux/version.h>
 #include <linux/firmware.h>
 #include <linux/wireless.h>
 #include <linux/workqueue.h>
@@ -3702,8 +3701,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
 	}
 
 	/* fill hw info */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_RX_INCLUDES_FCS |
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 	hw->queues = 1; /* FIXME: hardware has more queues */
@@ -3846,10 +3844,10 @@ static int b43legacy_resume(struct ssb_device *dev)
 			goto out;
 		}
 	}
-	mutex_unlock(&wl->mutex);
 
 	b43legacydbg(wl, "Device resumed.\n");
 out:
+	mutex_unlock(&wl->mutex);
 	return err;
 }
 
diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c
index 476add97e97..b32bf6a94f1 100644
--- a/drivers/net/wireless/b43legacy/rfkill.c
+++ b/drivers/net/wireless/b43legacy/rfkill.c
@@ -44,23 +44,6 @@ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
 	return 0;
 }
 
-/* Update the rfkill state */
-static void b43legacy_rfkill_update_state(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!dev->radio_hw_enable) {
-		rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
-		return;
-	}
-
-	if (!dev->phy.radio_on)
-		rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
-	else
-		rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
 /* The poll callback for the hardware button. */
 static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
 {
@@ -78,7 +61,6 @@ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
 		report_change = 1;
-		b43legacy_rfkill_update_state(dev);
 		b43legacyinfo(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
 	}
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index e969ed8d412..68e1f8c7872 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -192,7 +192,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev,
 			       u16 cookie)
 {
 	const struct ieee80211_hdr *wlhdr;
-	int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
+	int use_encryption = !!info->control.hw_key;
 	u16 fctl;
 	u8 rate;
 	struct ieee80211_rate *rate_fb;
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 5bf9e00b070..19a401c4a0d 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -157,7 +157,6 @@ that only one external action is invoked at a time.
 #include <linux/stringify.h>
 #include <linux/tcp.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/time.h>
 #include <linux/firmware.h>
 #include <linux/acpi.h>
@@ -6442,6 +6441,7 @@ static int ipw2100_resume(struct pci_dev *pci_dev)
 	if (err) {
 		printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
 		       dev->name);
+		mutex_unlock(&priv->action_mutex);
 		return err;
 	}
 	pci_restore_state(pci_dev);
@@ -7146,7 +7146,7 @@ static int ipw2100_wx_get_rate(struct net_device *dev,
 	err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
 	if (err) {
 		IPW_DEBUG_WX("failed querying ordinals.\n");
-		return err;
+		goto done;
 	}
 
 	switch (val & TX_RATE_MASK) {
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 1acfbcd3703..dcce3542d5a 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -31,7 +31,6 @@
 ******************************************************************************/
 
 #include "ipw2200.h"
-#include <linux/version.h>
 
 
 #ifndef KBUILD_EXTMOD
@@ -305,9 +304,10 @@ static inline void ipw_write_reg32(struct ipw_priv *a, u32 b, u32 c)
 #define _ipw_write8(ipw, ofs, val) writeb((val), (ipw)->hw_base + (ofs))
 
 /* 8-bit direct write (for low 4K of SRAM/regs), with debug wrapper */
-#define ipw_write8(ipw, ofs, val) \
+#define ipw_write8(ipw, ofs, val) do { \
  IPW_DEBUG_IO("%s %d: write_direct8(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \
- _ipw_write8(ipw, ofs, val)
+ _ipw_write8(ipw, ofs, val); \
+ } while (0)
 
 /* 16-bit direct write (low 4K) */
 #define _ipw_write16(ipw, ofs, val) writew((val), (ipw)->hw_base + (ofs))
@@ -11946,7 +11946,7 @@ module_param(auto_create, int, 0444);
 MODULE_PARM_DESC(auto_create, "auto create adhoc network (default on)");
 
 module_param(led, int, 0444);
-MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)\n");
+MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)");
 
 module_param(debug, int, 0444);
 MODULE_PARM_DESC(debug, "debug output mask");
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 82b66a3d3a5..b0ac0ce3fb9 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -14,18 +14,49 @@ config IWLWIFI_LEDS
 	default n
 
 config IWLWIFI_RFKILL
-	boolean "IWLWIFI RF kill support"
+	boolean "Iwlwifi RF kill support"
 	depends on IWLCORE
 
-config IWL4965
-	tristate "Intel Wireless WiFi 4965AGN"
+config IWLWIFI_DEBUG
+	bool "Enable full debugging output in iwlagn driver"
+	depends on IWLCORE
+	---help---
+	  This option will enable debug tracing output for the iwlwifi drivers
+
+	  This will result in the kernel module being ~100k larger.  You can
+	  control which debug output is sent to the kernel log by setting the
+	  value in
+
+		/sys/class/net/wlan0/device/debug_level
+
+	  This entry will only exist if this option is enabled.
+
+	  To set a value, simply echo an 8-byte hex value to the same file:
+
+		  % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
+
+	  You can find the list of debug mask values in:
+		  drivers/net/wireless/iwlwifi/iwl-debug.h
+
+	  If this is your first time using this driver, you should say Y here
+	  as the debug information can assist others in helping you resolve
+	  any problems you may encounter.
+
+config IWLWIFI_DEBUGFS
+        bool "Iwlwifi debugfs support"
+        depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS
+        ---help---
+	  Enable creation of debugfs files for the iwlwifi drivers.
+
+config IWLAGN
+	tristate "Intel Wireless WiFi Next Gen AGN"
 	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
 	select FW_LOADER
 	select IWLCORE
 	---help---
 	  Select to build the driver supporting the:
 
-	  Intel Wireless WiFi Link 4965AGN
+	  Intel Wireless WiFi Link Next-Gen AGN
 
 	  This driver uses the kernel's mac80211 subsystem.
 
@@ -42,60 +73,33 @@ config IWL4965
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwl4965.ko.
-
-config IWL4965_LEDS
-	bool "Enable LEDS features in iwl4965 driver"
-	depends on IWL4965
-	select IWLWIFI_LEDS
-	---help---
-	  This option enables LEDS for the iwlwifi drivers
+	  module will be called iwlagn.ko.
 
-
-config IWL4965_SPECTRUM_MEASUREMENT
-	bool "Enable Spectrum Measurement in iwl4965 driver"
-	depends on IWL4965
+config IWLAGN_SPECTRUM_MEASUREMENT
+	bool "Enable Spectrum Measurement in iwlagn driver"
+	depends on IWLAGN
 	---help---
-	  This option will enable spectrum measurement for the iwl4965 driver.
+	  This option will enable spectrum measurement for the iwlagn driver.
 
-config IWLWIFI_DEBUG
-	bool "Enable full debugging output in iwl4965 driver"
-	depends on IWL4965
+config IWLAGN_LEDS
+	bool "Enable LEDS features in iwlagn driver"
+	depends on IWLAGN
+	select IWLWIFI_LEDS
 	---help---
-	  This option will enable debug tracing output for the iwl4965
-	  driver.
-
-	  This will result in the kernel module being ~100k larger.  You can
-	  control which debug output is sent to the kernel log by setting the
-	  value in
-
-		/sys/class/net/wlan0/device/debug_level
-
-	  This entry will only exist if this option is enabled.
-
-	  To set a value, simply echo an 8-byte hex value to the same file:
-
-		  % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
+	  This option enables LEDS for the iwlagn drivers
 
-	  You can find the list of debug mask values in:
-		  drivers/net/wireless/iwlwifi/iwl-4965-debug.h
 
-	  If this is your first time using this driver, you should say Y here
-	  as the debug information can assist others in helping you resolve
-	  any problems you may encounter.
+config IWL4965
+	bool "Intel Wireless WiFi 4965AGN"
+	depends on IWLAGN
+	---help---
+	  This option enables support for Intel Wireless WiFi Link 4965AGN
 
 config IWL5000
 	bool "Intel Wireless WiFi 5000AGN"
-	depends on IWL4965
+	depends on IWLAGN
 	---help---
 	  This option enables support for Intel Wireless WiFi Link 5000AGN Family
-	  Dependency on 4965 is temporary
-
-config IWLWIFI_DEBUGFS
-        bool "Iwlwifi debugfs support"
-        depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS
-        ---help---
-	  Enable creation of debugfs files for the iwlwifi drivers.
 
 config IWL3945
 	tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 1f52b92f08b..47aa28f6a51 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -6,15 +6,14 @@ iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
 iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o
 iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o
 
+obj-$(CONFIG_IWLAGN)	+= iwlagn.o
+iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o
+
+iwlagn-$(CONFIG_IWL4965) += iwl-4965.o
+iwlagn-$(CONFIG_IWL5000) += iwl-5000.o
+
 obj-$(CONFIG_IWL3945)	+= iwl3945.o
 iwl3945-objs		:= iwl3945-base.o iwl-3945.o iwl-3945-rs.o
 iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o
 
-obj-$(CONFIG_IWL4965)	+= iwl4965.o
-iwl4965-objs		:= iwl4965-base.o iwl-4965.o iwl-4965-rs.o
-
-ifeq ($(CONFIG_IWL5000),y)
-	iwl4965-objs += iwl-5000.o
-endif
-
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index 6be1fe13fa5..705c65bed9f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -27,7 +27,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -206,12 +205,12 @@ static void iwl3945_led_brightness_set(struct led_classdev *led_cdev,
 static int iwl3945_led_register_led(struct iwl3945_priv *priv,
 				   struct iwl3945_led *led,
 				   enum led_type type, u8 set_led,
-				   const char *name, char *trigger)
+				   char *trigger)
 {
 	struct device *device = wiphy_dev(priv->hw->wiphy);
 	int ret;
 
-	led->led_dev.name = name;
+	led->led_dev.name = led->name;
 	led->led_dev.brightness_set = iwl3945_led_brightness_set;
 	led->led_dev.default_trigger = trigger;
 
@@ -308,7 +307,6 @@ void iwl3945_led_background(struct iwl3945_priv *priv)
 int iwl3945_led_register(struct iwl3945_priv *priv)
 {
 	char *trigger;
-	char name[32];
 	int ret;
 
 	priv->last_blink_rate = 0;
@@ -318,7 +316,8 @@ int iwl3945_led_register(struct iwl3945_priv *priv)
 	priv->allow_blinking = 0;
 
 	trigger = ieee80211_get_radio_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:radio",
+	snprintf(priv->led[IWL_LED_TRG_RADIO].name,
+		 sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio",
 		 wiphy_name(priv->hw->wiphy));
 
 	priv->led[IWL_LED_TRG_RADIO].led_on = iwl3945_led_on;
@@ -327,19 +326,20 @@ int iwl3945_led_register(struct iwl3945_priv *priv)
 
 	ret = iwl3945_led_register_led(priv,
 				   &priv->led[IWL_LED_TRG_RADIO],
-				   IWL_LED_TRG_RADIO, 1,
-				   name, trigger);
+				   IWL_LED_TRG_RADIO, 1, trigger);
+
 	if (ret)
 		goto exit_fail;
 
 	trigger = ieee80211_get_assoc_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:assoc",
+	snprintf(priv->led[IWL_LED_TRG_ASSOC].name,
+		 sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl3945_led_register_led(priv,
 				   &priv->led[IWL_LED_TRG_ASSOC],
-				   IWL_LED_TRG_ASSOC, 0,
-				   name, trigger);
+				   IWL_LED_TRG_ASSOC, 0, trigger);
+
 	/* for assoc always turn led on */
 	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_on;
 	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_on;
@@ -349,14 +349,13 @@ int iwl3945_led_register(struct iwl3945_priv *priv)
 		goto exit_fail;
 
 	trigger = ieee80211_get_rx_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:RX",
+	snprintf(priv->led[IWL_LED_TRG_RX].name,
+		 sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX",
 		 wiphy_name(priv->hw->wiphy));
 
-
 	ret = iwl3945_led_register_led(priv,
 				   &priv->led[IWL_LED_TRG_RX],
-				   IWL_LED_TRG_RX, 0,
-				   name, trigger);
+				   IWL_LED_TRG_RX, 0, trigger);
 
 	priv->led[IWL_LED_TRG_RX].led_on = iwl3945_led_associated;
 	priv->led[IWL_LED_TRG_RX].led_off = iwl3945_led_associated;
@@ -366,13 +365,14 @@ int iwl3945_led_register(struct iwl3945_priv *priv)
 		goto exit_fail;
 
 	trigger = ieee80211_get_tx_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:TX",
+	snprintf(priv->led[IWL_LED_TRG_TX].name,
+		 sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl3945_led_register_led(priv,
 				   &priv->led[IWL_LED_TRG_TX],
-				   IWL_LED_TRG_TX, 0,
-				   name, trigger);
+				   IWL_LED_TRG_TX, 0, trigger);
+
 	priv->led[IWL_LED_TRG_TX].led_on = iwl3945_led_associated;
 	priv->led[IWL_LED_TRG_TX].led_off = iwl3945_led_associated;
 	priv->led[IWL_LED_TRG_TX].led_pattern = iwl3945_led_pattern;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
index 47b7e0bac80..2fbd126c134 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
@@ -50,6 +50,7 @@ enum led_type {
 struct iwl3945_led {
 	struct iwl3945_priv *priv;
 	struct led_classdev led_dev;
+	char name[32];
 
 	int (*led_on) (struct iwl3945_priv *priv, int led_id);
 	int (*led_off) (struct iwl3945_priv *priv, int led_id);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index c2a76785b66..3f51f363534 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -26,7 +26,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -630,7 +629,9 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv,
 				   struct ieee80211_rx_status *stats)
 {
 	struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
+#ifdef CONFIG_IWL3945_LEDS
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
+#endif
 	struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 	short len = le16_to_cpu(rx_hdr->len);
@@ -708,10 +709,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 		return;
 	}
 
-	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
-		iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
-		return;
-	}
+
 
 	/* Convert 3945's rssi indicator to dBm */
 	rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET;
@@ -773,6 +771,11 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 		priv->last_rx_noise = rx_status.noise;
 	}
 
+	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
+		iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
+		return;
+	}
+
 	switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) {
 	case IEEE80211_FTYPE_MGMT:
 		switch (le16_to_cpu(header->frame_control) &
@@ -791,8 +794,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 					struct ieee80211_mgmt *mgmt =
 					    (struct ieee80211_mgmt *)header;
 					__le32 *pos;
-					pos =
-					    (__le32 *) & mgmt->u.beacon.
+					pos = (__le32 *)&mgmt->u.beacon.
 					    timestamp;
 					priv->timestamp0 = le32_to_cpu(pos[0]);
 					priv->timestamp1 = le32_to_cpu(pos[1]);
@@ -1505,7 +1507,7 @@ static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
  */
 static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
 {
-	return (((temperature < -260) || (temperature > 25)) ? 1 : 0);
+	return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
 }
 
 int iwl3945_hw_get_temperature(struct iwl3945_priv *priv)
@@ -2626,7 +2628,7 @@ unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv,
 	tx_beacon_cmd->tx.supp_rates[1] =
 		(IWL_CCK_BASIC_RATES_MASK & 0xF);
 
-	return (sizeof(struct iwl3945_tx_beacon_cmd) + frame_size);
+	return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
 }
 
 void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv)
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 9afecb81371..23fed329896 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -26,7 +26,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -341,39 +340,6 @@ err:
 	return -EINVAL;
 
 }
-int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
-	if (src == IWL_PWR_SRC_VAUX) {
-		u32 val;
-		ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE,
-					    &val);
-
-		if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) {
-			iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
-					       APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
-					       ~APMG_PS_CTRL_MSK_PWR_SRC);
-		}
-	} else {
-		iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
-				       APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
-				       ~APMG_PS_CTRL_MSK_PWR_SRC);
-	}
-
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return ret;
-}
 
 /*
  * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask
@@ -508,8 +474,8 @@ static void iwl4965_apm_stop(struct iwl_priv *priv)
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 
 	udelay(10);
-
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+	/* clear "init complete"  move adapter D0A* --> D0U state */
+	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
@@ -875,18 +841,6 @@ static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
 	return 0;
 }
 
-/* set card power command */
-static int iwl4965_set_power(struct iwl_priv *priv,
-		      void *cmd)
-{
-	int ret = 0;
-
-	ret = iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD,
-				    sizeof(struct iwl4965_powertable_cmd),
-				    cmd, NULL);
-	return ret;
-}
-
 static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
 {
 	s32 sign = 1;
@@ -1012,7 +966,7 @@ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
 
 	s = iwl4965_get_sub_band(priv, channel);
 	if (s >= EEPROM_TX_POWER_BANDS) {
-		IWL_ERROR("Tx Power can not find channel %d ", channel);
+		IWL_ERROR("Tx Power can not find channel %d\n", channel);
 		return -1;
 	}
 
@@ -1560,11 +1514,11 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
 					  c, atten_value, power_index,
 					tx_power.s.radio_tx_gain[c],
 					tx_power.s.dsp_predis_atten[c]);
-		}/* for each chain */
+		} /* for each chain */
 
 		tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
 
-	}/* for each rate */
+	} /* for each rate */
 
 	return 0;
 }
@@ -1701,38 +1655,6 @@ static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv)
 	return le32_to_cpu(s->rb_closed) & 0xFFF;
 }
 
-unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv,
-			  struct iwl_frame *frame, u8 rate)
-{
-	struct iwl4965_tx_beacon_cmd *tx_beacon_cmd;
-	unsigned int frame_size;
-
-	tx_beacon_cmd = &frame->u.beacon;
-	memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
-
-	tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
-	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
-	frame_size = iwl4965_fill_beacon_frame(priv,
-				tx_beacon_cmd->frame,
-				iwl_bcast_addr,
-				sizeof(frame->u) - sizeof(*tx_beacon_cmd));
-
-	BUG_ON(frame_size > MAX_MPDU_SIZE);
-	tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
-
-	if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP))
-		tx_beacon_cmd->tx.rate_n_flags =
-			iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK);
-	else
-		tx_beacon_cmd->tx.rate_n_flags =
-			iwl_hw_set_rate_n_flags(rate, 0);
-
-	tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
-				TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK);
-	return (sizeof(*tx_beacon_cmd) + frame_size);
-}
-
 static int iwl4965_alloc_shared_mem(struct iwl_priv *priv)
 {
 	priv->shared_virt = pci_alloc_consistent(priv->pci_dev,
@@ -2079,39 +2001,6 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	return 0;
 }
 
-int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw,
-			     enum ieee80211_ampdu_mlme_action action,
-			     const u8 *addr, u16 tid, u16 *ssn)
-{
-	struct iwl_priv *priv = hw->priv;
-	DECLARE_MAC_BUF(mac);
-
-	IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n",
-		     print_mac(mac, addr), tid);
-
-	if (!(priv->cfg->sku & IWL_SKU_N))
-		return -EACCES;
-
-	switch (action) {
-	case IEEE80211_AMPDU_RX_START:
-		IWL_DEBUG_HT("start Rx\n");
-		return iwl_rx_agg_start(priv, addr, tid, *ssn);
-	case IEEE80211_AMPDU_RX_STOP:
-		IWL_DEBUG_HT("stop Rx\n");
-		return iwl_rx_agg_stop(priv, addr, tid);
-	case IEEE80211_AMPDU_TX_START:
-		IWL_DEBUG_HT("start Tx\n");
-		return iwl_tx_agg_start(priv, addr, tid, ssn);
-	case IEEE80211_AMPDU_TX_STOP:
-		IWL_DEBUG_HT("stop Tx\n");
-		return iwl_tx_agg_stop(priv, addr, tid);
-	default:
-		IWL_DEBUG_HT("unknown\n");
-		return -EINVAL;
-		break;
-	}
-	return 0;
-}
 
 static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len)
 {
@@ -2240,9 +2129,9 @@ static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
 				bitmap = bitmap << sh;
 				sh = 0;
 			}
-			bitmap |= (1 << sh);
-			IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n",
-					   start, (u32)(bitmap & 0xFFFFFFFF));
+			bitmap |= 1ULL << sh;
+			IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n",
+					   start, (unsigned long long)bitmap);
 		}
 
 		agg->bitmap = bitmap;
@@ -2368,6 +2257,40 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 		IWL_ERROR("TODO:  Implement Tx ABORT REQUIRED!!!\n");
 }
 
+static int iwl4965_calc_rssi(struct iwl_priv *priv,
+			     struct iwl_rx_phy_res *rx_resp)
+{
+	/* data from PHY/DSP regarding signal strength, etc.,
+	 *   contents are always there, not configurable by host.  */
+	struct iwl4965_rx_non_cfg_phy *ncphy =
+	    (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
+	u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK)
+			>> IWL49_AGC_DB_POS;
+
+	u32 valid_antennae =
+	    (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK)
+			>> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
+	u8 max_rssi = 0;
+	u32 i;
+
+	/* Find max rssi among 3 possible receivers.
+	 * These values are measured by the digital signal processor (DSP).
+	 * They should stay fairly constant even as the signal strength varies,
+	 *   if the radio's automatic gain control (AGC) is working right.
+	 * AGC value (see below) will provide the "interesting" info. */
+	for (i = 0; i < 3; i++)
+		if (valid_antennae & (1 << i))
+			max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
+
+	IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
+		ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
+		max_rssi, agc);
+
+	/* dBm = max_rssi dB - agc dB - constant.
+	 * Higher AGC (higher radio gain) means lower signal. */
+	return max_rssi - agc - IWL_RSSI_OFFSET;
+}
+
 
 /* Set up 4965-specific Rx frame reply handlers */
 static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
@@ -2399,6 +2322,7 @@ static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
 	.chain_noise_reset = iwl4965_chain_noise_reset,
 	.gain_computation = iwl4965_gain_computation,
 	.rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag,
+	.calc_rssi = iwl4965_calc_rssi,
 };
 
 static struct iwl_lib_ops iwl4965_lib = {
@@ -2440,7 +2364,6 @@ static struct iwl_lib_ops iwl4965_lib = {
 		.check_version = iwl4965_eeprom_check_version,
 		.query_addr = iwlcore_eeprom_query_addr,
 	},
-	.set_power = iwl4965_set_power,
 	.send_tx_power	= iwl4965_send_tx_power,
 	.update_chain_flags = iwl4965_update_chain_flags,
 	.temperature = iwl4965_temperature_calib,
@@ -2469,7 +2392,7 @@ MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
 module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
 module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
-MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])\n");
+MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
 module_param_named(debug, iwl4965_mod_params.debug, int, 0444);
 MODULE_PARM_DESC(debug, "debug output mask");
 module_param_named(
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 878d6193b23..b08036a9d89 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -25,7 +25,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -93,6 +92,13 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
 	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
 		    CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
 
+	/* Set FH wait treshold to maximum (HW error during stress W/A) */
+	iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
+
+	/* enable HAP INTA to move device L1a -> L0s */
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+		    CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
+
 	iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
 
 	/* set "initialization complete" bit to move adapter
@@ -139,7 +145,8 @@ static void iwl5000_apm_stop(struct iwl_priv *priv)
 
 	udelay(10);
 
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+	/* clear "init complete"  move adapter D0A* --> D0U state */
+	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
@@ -230,6 +237,16 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
 		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
 		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 
+	/* W/A : NIC is stuck in a reset state after Early PCIe power off
+	 * (PCIe power is lost before PERST# is asserted),
+	 * causing ME FW to lose ownership and not being able to obtain it back.
+	 */
+	iwl_grab_nic_access(priv);
+	iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
+				APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
+				~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
+	iwl_release_nic_access(priv);
+
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
@@ -561,14 +578,11 @@ static int iwl5000_load_section(struct iwl_priv *priv,
 		FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL),
 		phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK);
 
-	/* FIME: write the MSB of the phy_addr in CTRL1
-	 * iwl_write_direct32(priv,
-		IWL_FH_TFDIB_CTRL1_REG(IWL_FH_SRVC_CHNL),
-		((phy_addr & MSB_MSK)
-			<< FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_count);
-	 */
 	iwl_write_direct32(priv,
-		FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL), byte_cnt);
+		FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL),
+		(iwl_get_dma_hi_address(phy_addr)
+			<< FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt);
+
 	iwl_write_direct32(priv,
 		FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL),
 		1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM |
@@ -924,8 +938,8 @@ static void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
 	len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
 
 	if (txq_id != IWL_CMD_QUEUE_NUM) {
-		sta = txq->cmd[txq->q.write_ptr].cmd.tx.sta_id;
-		sec_ctl = txq->cmd[txq->q.write_ptr].cmd.tx.sec_ctl;
+		sta = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id;
+		sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl;
 
 		switch (sec_ctl & TX_CMD_SEC_MSK) {
 		case TX_CMD_SEC_CCM:
@@ -964,7 +978,7 @@ static void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
 	u8 sta = 0;
 
 	if (txq_id != IWL_CMD_QUEUE_NUM)
-		sta = txq->cmd[txq->q.read_ptr].cmd.tx.sta_id;
+		sta = txq->cmd[txq->q.read_ptr]->cmd.tx.sta_id;
 
 	shared_data->queues_byte_cnt_tbls[txq_id].tfd_offset[txq->q.read_ptr].
 					val = cpu_to_le16(1 | (sta << 12));
@@ -1131,7 +1145,7 @@ static void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask)
 
 static inline u32 iwl5000_get_scd_ssn(struct iwl5000_tx_resp *tx_resp)
 {
-	return le32_to_cpup((__le32*)&tx_resp->status +
+	return le32_to_cpup((__le32 *)&tx_resp->status +
 			    tx_resp->frame_count) & MAX_SN;
 }
 
@@ -1228,9 +1242,9 @@ static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv,
 				bitmap = bitmap << sh;
 				sh = 0;
 			}
-			bitmap |= (1 << sh);
-			IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n",
-					   start, (u32)(bitmap & 0xFFFFFFFF));
+			bitmap |= 1ULL << sh;
+			IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n",
+					   start, (unsigned long long)bitmap);
 		}
 
 		agg->bitmap = bitmap;
@@ -1444,6 +1458,44 @@ static void iwl5000_temperature(struct iwl_priv *priv)
 	priv->temperature = le32_to_cpu(priv->statistics.general.temperature);
 }
 
+/* Calc max signal level (dBm) among 3 possible receivers */
+static int iwl5000_calc_rssi(struct iwl_priv *priv,
+			     struct iwl_rx_phy_res *rx_resp)
+{
+	/* data from PHY/DSP regarding signal strength, etc.,
+	 *   contents are always there, not configurable by host
+	 */
+	struct iwl5000_non_cfg_phy *ncphy =
+		(struct iwl5000_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
+	u32 val, rssi_a, rssi_b, rssi_c, max_rssi;
+	u8 agc;
+
+	val  = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_AGC_IDX]);
+	agc = (val & IWL50_OFDM_AGC_MSK) >> IWL50_OFDM_AGC_BIT_POS;
+
+	/* Find max rssi among 3 possible receivers.
+	 * These values are measured by the digital signal processor (DSP).
+	 * They should stay fairly constant even as the signal strength varies,
+	 *   if the radio's automatic gain control (AGC) is working right.
+	 * AGC value (see below) will provide the "interesting" info.
+	 */
+	val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_AB_IDX]);
+	rssi_a = (val & IWL50_OFDM_RSSI_A_MSK) >> IWL50_OFDM_RSSI_A_BIT_POS;
+	rssi_b = (val & IWL50_OFDM_RSSI_B_MSK) >> IWL50_OFDM_RSSI_B_BIT_POS;
+	val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_C_IDX]);
+	rssi_c = (val & IWL50_OFDM_RSSI_C_MSK) >> IWL50_OFDM_RSSI_C_BIT_POS;
+
+	max_rssi = max_t(u32, rssi_a, rssi_b);
+	max_rssi = max_t(u32, max_rssi, rssi_c);
+
+	IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
+		rssi_a, rssi_b, rssi_c, max_rssi, agc);
+
+	/* dBm = max_rssi dB - agc dB - constant.
+	 * Higher AGC (higher radio gain) means lower signal. */
+	return max_rssi - agc - IWL_RSSI_OFFSET;
+}
+
 static struct iwl_hcmd_ops iwl5000_hcmd = {
 	.rxon_assoc = iwl5000_send_rxon_assoc,
 };
@@ -1454,6 +1506,7 @@ static struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
 	.gain_computation = iwl5000_gain_computation,
 	.chain_noise_reset = iwl5000_chain_noise_reset,
 	.rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag,
+	.calc_rssi = iwl5000_calc_rssi,
 };
 
 static struct iwl_lib_ops iwl5000_lib = {
@@ -1474,6 +1527,7 @@ static struct iwl_lib_ops iwl5000_lib = {
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
 	.temperature = iwl5000_temperature,
+	.update_chain_flags = iwl4965_update_chain_flags,
 	.apm_ops = {
 		.init =	iwl5000_apm_init,
 		.reset = iwl5000_apm_reset,
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 3ccb84aa5db..90a2b6dee7c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -42,7 +42,7 @@
 #include "iwl-core.h"
 #include "iwl-helpers.h"
 
-#define RS_NAME "iwl-4965-rs"
+#define RS_NAME "iwl-agn-rs"
 
 #define NUM_TRY_BEFORE_ANT_TOGGLE 1
 #define IWL_NUMBER_TRY      1
@@ -77,9 +77,9 @@ static const u8 ant_toggle_lookup[] = {
 };
 
 /**
- * struct iwl4965_rate_scale_data -- tx success history for one rate
+ * struct iwl_rate_scale_data -- tx success history for one rate
  */
-struct iwl4965_rate_scale_data {
+struct iwl_rate_scale_data {
 	u64 data;		/* bitmap of successful frames */
 	s32 success_counter;	/* number of frames successful */
 	s32 success_ratio;	/* per-cent * 128  */
@@ -89,12 +89,12 @@ struct iwl4965_rate_scale_data {
 };
 
 /**
- * struct iwl4965_scale_tbl_info -- tx params and success history for all rates
+ * struct iwl_scale_tbl_info -- tx params and success history for all rates
  *
- * There are two of these in struct iwl4965_lq_sta,
+ * There are two of these in struct iwl_lq_sta,
  * one for "active", and one for "search".
  */
-struct iwl4965_scale_tbl_info {
+struct iwl_scale_tbl_info {
 	enum iwl_table_type lq_type;
 	u8 ant_type;
 	u8 is_SGI;	/* 1 = short guard interval */
@@ -103,10 +103,10 @@ struct iwl4965_scale_tbl_info {
 	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
 	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
 	u32 current_rate;  /* rate_n_flags, uCode API format */
-	struct iwl4965_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
+	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
 };
 
-struct iwl4965_traffic_load {
+struct iwl_traffic_load {
 	unsigned long time_stamp;	/* age of the oldest statistics */
 	u32 packet_count[TID_QUEUE_MAX_SIZE];   /* packet count in this time
 						 * slice */
@@ -118,11 +118,11 @@ struct iwl4965_traffic_load {
 };
 
 /**
- * struct iwl4965_lq_sta -- driver's rate scaling private structure
+ * struct iwl_lq_sta -- driver's rate scaling private structure
  *
  * Pointer to this gets passed back and forth between driver and mac80211.
  */
-struct iwl4965_lq_sta {
+struct iwl_lq_sta {
 	u8 active_tbl;		/* index of active table, range 0-1 */
 	u8 enable_counter;	/* indicates HT mode */
 	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
@@ -153,8 +153,8 @@ struct iwl4965_lq_sta {
 	u16 active_rate_basic;
 
 	struct iwl_link_quality_cmd lq;
-	struct iwl4965_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
-	struct iwl4965_traffic_load load[TID_MAX_LOAD_COUNT];
+	struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
+	struct iwl_traffic_load load[TID_MAX_LOAD_COUNT];
 	u8 tx_agg_tid_en;
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct dentry *rs_sta_dbgfs_scale_table_file;
@@ -170,16 +170,15 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 				   struct ieee80211_hdr *hdr,
 				   struct sta_info *sta);
 static void rs_fill_link_cmd(const struct iwl_priv *priv,
-			     struct iwl4965_lq_sta *lq_sta,
-			     u32 rate_n_flags);
+			     struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
 
 
 #ifdef CONFIG_MAC80211_DEBUGFS
-static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta,
-					u32 *rate_n_flags, int index);
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+			     u32 *rate_n_flags, int index);
 #else
-static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta,
-					u32 *rate_n_flags, int index)
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+			     u32 *rate_n_flags, int index)
 {}
 #endif
 
@@ -234,7 +233,7 @@ static inline u8 rs_extract_rate(u32 rate_n_flags)
 	return (u8)(rate_n_flags & 0xFF);
 }
 
-static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window)
+static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
 {
 	window->data = 0;
 	window->success_counter = 0;
@@ -246,14 +245,14 @@ static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window)
 
 static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
 {
-	return ((ant_type & valid_antenna) == ant_type);
+	return (ant_type & valid_antenna) == ant_type;
 }
 
 /*
  *	removes the old data from the statistics. All data that is older than
  *	TID_MAX_TIME_DIFF, will be deleted.
  */
-static void rs_tl_rm_old_stats(struct iwl4965_traffic_load *tl, u32 curr_time)
+static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time)
 {
 	/* The oldest age we want to keep */
 	u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
@@ -274,13 +273,13 @@ static void rs_tl_rm_old_stats(struct iwl4965_traffic_load *tl, u32 curr_time)
  *	increment traffic load value for tid and also remove
  *	any old values if passed the certain time period
  */
-static u8 rs_tl_add_packet(struct iwl4965_lq_sta *lq_data,
+static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data,
 			   struct ieee80211_hdr *hdr)
 {
 	u32 curr_time = jiffies_to_msecs(jiffies);
 	u32 time_diff;
 	s32 index;
-	struct iwl4965_traffic_load *tl = NULL;
+	struct iwl_traffic_load *tl = NULL;
 	__le16 fc = hdr->frame_control;
 	u8 tid;
 
@@ -325,12 +324,12 @@ static u8 rs_tl_add_packet(struct iwl4965_lq_sta *lq_data,
 /*
 	get the traffic load value for tid
 */
-static u32 rs_tl_get_load(struct iwl4965_lq_sta *lq_data, u8 tid)
+static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid)
 {
 	u32 curr_time = jiffies_to_msecs(jiffies);
 	u32 time_diff;
 	s32 index;
-	struct iwl4965_traffic_load *tl = NULL;
+	struct iwl_traffic_load *tl = NULL;
 
 	if (tid >= TID_MAX_LOAD_COUNT)
 		return 0;
@@ -354,8 +353,8 @@ static u32 rs_tl_get_load(struct iwl4965_lq_sta *lq_data, u8 tid)
 }
 
 static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
-				struct iwl4965_lq_sta *lq_data, u8 tid,
-				struct sta_info *sta)
+				      struct iwl_lq_sta *lq_data, u8 tid,
+				      struct sta_info *sta)
 {
 	unsigned long state;
 	DECLARE_MAC_BUF(mac);
@@ -373,8 +372,8 @@ static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
 }
 
 static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
-				struct iwl4965_lq_sta *lq_data,
-				struct sta_info *sta)
+			      struct iwl_lq_sta *lq_data,
+			      struct sta_info *sta)
 {
 	if ((tid < TID_MAX_LOAD_COUNT))
 		rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
@@ -385,9 +384,9 @@ static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
 
 static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
 {
-	return (!!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
-		!!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
-		!!(rate_n_flags & RATE_MCS_ANT_C_MSK));
+	return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
+	       !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
+	       !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
 }
 
 /**
@@ -397,11 +396,11 @@ static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
  * at this rate.  window->data contains the bitmask of successful
  * packets.
  */
-static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows,
+static int rs_collect_tx_data(struct iwl_rate_scale_data *windows,
 			      int scale_index, s32 tpt, int retries,
 			      int successes)
 {
-	struct iwl4965_rate_scale_data *window = NULL;
+	struct iwl_rate_scale_data *window = NULL;
 	static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
 	s32 fail_count;
 
@@ -473,7 +472,7 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows,
  * Fill uCode API rate_n_flags field, based on "search" or "active" table.
  */
 /* FIXME:RS:remove this function and put the flags statically in the table */
-static u32 rate_n_flags_from_tbl(struct iwl4965_scale_tbl_info *tbl,
+static u32 rate_n_flags_from_tbl(struct iwl_scale_tbl_info *tbl,
 				       int index, u8 use_green)
 {
 	u32 rate_n_flags = 0;
@@ -530,7 +529,7 @@ static u32 rate_n_flags_from_tbl(struct iwl4965_scale_tbl_info *tbl,
  */
 static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
 				    enum ieee80211_band band,
-				    struct iwl4965_scale_tbl_info *tbl,
+				    struct iwl_scale_tbl_info *tbl,
 				    int *rate_idx)
 {
 	u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
@@ -591,7 +590,7 @@ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
 /* switch to another antenna/antennas and return 1 */
 /* if no other valid antenna found, return 0 */
 static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
-			      struct iwl4965_scale_tbl_info *tbl)
+			     struct iwl_scale_tbl_info *tbl)
 {
 	u8 new_ant_type;
 
@@ -621,9 +620,9 @@ static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
 #if 0
 static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
 {
-	return ((conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
+	return (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
 		priv->current_ht_config.is_green_field &&
-		!priv->current_ht_config.non_GF_STA_present);
+		!priv->current_ht_config.non_GF_STA_present;
 }
 #endif
 static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
@@ -638,9 +637,9 @@ static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf
  * basic available rates.
  *
  */
-static u16 rs_get_supported_rates(struct iwl4965_lq_sta *lq_sta,
-				   struct ieee80211_hdr *hdr,
-				   enum iwl_table_type rate_type)
+static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta,
+				  struct ieee80211_hdr *hdr,
+				  enum iwl_table_type rate_type)
 {
 	if (hdr && is_multicast_ether_addr(hdr->addr1) &&
 	    lq_sta->active_rate_basic)
@@ -714,9 +713,9 @@ static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask,
 	return (high << 8) | low;
 }
 
-static u32 rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta,
-			     struct iwl4965_scale_tbl_info *tbl, u8 scale_index,
-			     u8 ht_possible)
+static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
+			     struct iwl_scale_tbl_info *tbl,
+			     u8 scale_index, u8 ht_possible)
 {
 	s32 low;
 	u16 rate_mask;
@@ -780,7 +779,7 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev,
 	int status;
 	u8 retries;
 	int rs_index, index = 0;
-	struct iwl4965_lq_sta *lq_sta;
+	struct iwl_lq_sta *lq_sta;
 	struct iwl_link_quality_cmd *table;
 	struct sta_info *sta;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
@@ -788,11 +787,11 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev,
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_hw *hw = local_to_hw(local);
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct iwl4965_rate_scale_data *window = NULL;
-	struct iwl4965_rate_scale_data *search_win = NULL;
+	struct iwl_rate_scale_data *window = NULL;
+	struct iwl_rate_scale_data *search_win = NULL;
 	u32 tx_rate;
-	struct iwl4965_scale_tbl_info tbl_type;
-	struct iwl4965_scale_tbl_info *curr_tbl, *search_tbl;
+	struct iwl_scale_tbl_info tbl_type;
+	struct iwl_scale_tbl_info *curr_tbl, *search_tbl;
 	u8 active_index = 0;
 	__le16 fc = hdr->frame_control;
 	s32 tpt = 0;
@@ -820,7 +819,7 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev,
 		goto out;
 
 
-	lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
+	lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
 
 	if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
 	    !lq_sta->ibss_sta_added)
@@ -831,10 +830,8 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev,
 
 	curr_tbl = &(lq_sta->lq_info[active_index]);
 	search_tbl = &(lq_sta->lq_info[(1 - active_index)]);
-	window = (struct iwl4965_rate_scale_data *)
-	    &(curr_tbl->win[0]);
-	search_win = (struct iwl4965_rate_scale_data *)
-	    &(search_tbl->win[0]);
+	window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]);
+	search_win = (struct iwl_rate_scale_data *)&(search_tbl->win[0]);
 
 	/*
 	 * Ignore this Tx frame response if its initial rate doesn't match
@@ -983,7 +980,7 @@ out:
  * searching for a new mode.
  */
 static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
-				 struct iwl4965_lq_sta *lq_sta)
+				 struct iwl_lq_sta *lq_sta)
 {
 	IWL_DEBUG_RATE("we are staying in the same table\n");
 	lq_sta->stay_in_tbl = 1;	/* only place this gets set */
@@ -1004,8 +1001,8 @@ static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
 /*
  * Find correct throughput table for given mode of modulation
  */
-static void rs_set_expected_tpt_table(struct iwl4965_lq_sta *lq_sta,
-				      struct iwl4965_scale_tbl_info *tbl)
+static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
+				      struct iwl_scale_tbl_info *tbl)
 {
 	if (is_legacy(tbl->lq_type)) {
 		if (!is_a_band(tbl->lq_type))
@@ -1050,12 +1047,12 @@ static void rs_set_expected_tpt_table(struct iwl4965_lq_sta *lq_sta,
  * bit rate will typically need to increase, but not if performance was bad.
  */
 static s32 rs_get_best_rate(struct iwl_priv *priv,
-			    struct iwl4965_lq_sta *lq_sta,
-			    struct iwl4965_scale_tbl_info *tbl,	/* "search" */
+			    struct iwl_lq_sta *lq_sta,
+			    struct iwl_scale_tbl_info *tbl,	/* "search" */
 			    u16 rate_mask, s8 index)
 {
 	/* "active" values */
-	struct iwl4965_scale_tbl_info *active_tbl =
+	struct iwl_scale_tbl_info *active_tbl =
 	    &(lq_sta->lq_info[lq_sta->active_tbl]);
 	s32 active_sr = active_tbl->win[index].success_ratio;
 	s32 active_tpt = active_tbl->expected_tpt[index];
@@ -1143,10 +1140,10 @@ static s32 rs_get_best_rate(struct iwl_priv *priv,
  * Set up search table for MIMO
  */
 static int rs_switch_to_mimo2(struct iwl_priv *priv,
-			     struct iwl4965_lq_sta *lq_sta,
+			     struct iwl_lq_sta *lq_sta,
 			     struct ieee80211_conf *conf,
 			     struct sta_info *sta,
-			     struct iwl4965_scale_tbl_info *tbl, int index)
+			     struct iwl_scale_tbl_info *tbl, int index)
 {
 	u16 rate_mask;
 	s32 rate;
@@ -1156,7 +1153,8 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv,
 	    !sta->ht_info.ht_supported)
 		return -1;
 
-	if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC)
+	if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2)
+						== IWL_MIMO_PS_STATIC)
 		return -1;
 
 	/* Need both Tx chains/antennas to support MIMO */
@@ -1210,10 +1208,10 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv,
  * Set up search table for SISO
  */
 static int rs_switch_to_siso(struct iwl_priv *priv,
-			     struct iwl4965_lq_sta *lq_sta,
+			     struct iwl_lq_sta *lq_sta,
 			     struct ieee80211_conf *conf,
 			     struct sta_info *sta,
-			     struct iwl4965_scale_tbl_info *tbl, int index)
+			     struct iwl_scale_tbl_info *tbl, int index)
 {
 	u16 rate_mask;
 	u8 is_green = lq_sta->is_green;
@@ -1270,18 +1268,17 @@ static int rs_switch_to_siso(struct iwl_priv *priv,
  * Try to switch to new modulation mode from legacy
  */
 static int rs_move_legacy_other(struct iwl_priv *priv,
-				struct iwl4965_lq_sta *lq_sta,
+				struct iwl_lq_sta *lq_sta,
 				struct ieee80211_conf *conf,
 				struct sta_info *sta,
 				int index)
 {
-	struct iwl4965_scale_tbl_info *tbl =
-	    &(lq_sta->lq_info[lq_sta->active_tbl]);
-	struct iwl4965_scale_tbl_info *search_tbl =
-	    &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-	struct iwl4965_rate_scale_data *window = &(tbl->win[index]);
-	u32 sz = (sizeof(struct iwl4965_scale_tbl_info) -
-		  (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT));
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	struct iwl_rate_scale_data *window = &(tbl->win[index]);
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
 	u8 start_action = tbl->action;
 	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
 	int ret = 0;
@@ -1360,19 +1357,17 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
  * Try to switch to new modulation mode from SISO
  */
 static int rs_move_siso_to_other(struct iwl_priv *priv,
-				 struct iwl4965_lq_sta *lq_sta,
+				 struct iwl_lq_sta *lq_sta,
 				 struct ieee80211_conf *conf,
-				 struct sta_info *sta,
-				 int index)
+				 struct sta_info *sta, int index)
 {
 	u8 is_green = lq_sta->is_green;
-	struct iwl4965_scale_tbl_info *tbl =
-	    &(lq_sta->lq_info[lq_sta->active_tbl]);
-	struct iwl4965_scale_tbl_info *search_tbl =
-	    &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-	struct iwl4965_rate_scale_data *window = &(tbl->win[index]);
-	u32 sz = (sizeof(struct iwl4965_scale_tbl_info) -
-		  (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT));
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	struct iwl_rate_scale_data *window = &(tbl->win[index]);
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
 	u8 start_action = tbl->action;
 	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
 	int ret;
@@ -1455,18 +1450,16 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
  * Try to switch to new modulation mode from MIMO
  */
 static int rs_move_mimo_to_other(struct iwl_priv *priv,
-				 struct iwl4965_lq_sta *lq_sta,
+				 struct iwl_lq_sta *lq_sta,
 				 struct ieee80211_conf *conf,
-				 struct sta_info *sta,
-				 int index)
+				 struct sta_info *sta, int index)
 {
 	s8 is_green = lq_sta->is_green;
-	struct iwl4965_scale_tbl_info *tbl =
-	    &(lq_sta->lq_info[lq_sta->active_tbl]);
-	struct iwl4965_scale_tbl_info *search_tbl =
-	    &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-	u32 sz = (sizeof(struct iwl4965_scale_tbl_info) -
-		  (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT));
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
 	u8 start_action = tbl->action;
 	/*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/
 	int ret;
@@ -1552,9 +1545,9 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
  * 2) # times calling this function
  * 3) elapsed time in this mode (not used, for now)
  */
-static void rs_stay_in_table(struct iwl4965_lq_sta *lq_sta)
+static void rs_stay_in_table(struct iwl_lq_sta *lq_sta)
 {
-	struct iwl4965_scale_tbl_info *tbl;
+	struct iwl_scale_tbl_info *tbl;
 	int i;
 	int active_tbl;
 	int flush_interval_passed = 0;
@@ -1642,7 +1635,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 	int high = IWL_RATE_INVALID;
 	int index;
 	int i;
-	struct iwl4965_rate_scale_data *window = NULL;
+	struct iwl_rate_scale_data *window = NULL;
 	int current_tpt = IWL_INVALID_VALUE;
 	int low_tpt = IWL_INVALID_VALUE;
 	int high_tpt = IWL_INVALID_VALUE;
@@ -1651,8 +1644,8 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 	__le16 fc;
 	u16 rate_mask;
 	u8 update_lq = 0;
-	struct iwl4965_lq_sta *lq_sta;
-	struct iwl4965_scale_tbl_info *tbl, *tbl1;
+	struct iwl_lq_sta *lq_sta;
+	struct iwl_scale_tbl_info *tbl, *tbl1;
 	u16 rate_scale_index_msk = 0;
 	u32 rate;
 	u8 is_green = 0;
@@ -1675,7 +1668,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 	if (!sta || !sta->rate_ctrl_priv)
 		return;
 
-	lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
+	lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
 
 	tid = rs_tl_add_packet(lq_sta, hdr);
 
@@ -2030,8 +2023,8 @@ static void rs_initialize_lq(struct iwl_priv *priv,
 			     struct ieee80211_conf *conf,
 			     struct sta_info *sta)
 {
-	struct iwl4965_lq_sta *lq_sta;
-	struct iwl4965_scale_tbl_info *tbl;
+	struct iwl_lq_sta *lq_sta;
+	struct iwl_scale_tbl_info *tbl;
 	int rate_idx;
 	int i;
 	u32 rate;
@@ -2042,7 +2035,7 @@ static void rs_initialize_lq(struct iwl_priv *priv,
 	if (!sta || !sta->rate_ctrl_priv)
 		goto out;
 
-	lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
+	lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
 	i = sta->last_txrate_idx;
 
 	if ((lq_sta->lq.sta_id == 0xff) &&
@@ -2096,7 +2089,7 @@ static void rs_get_rate(void *priv_rate, struct net_device *dev,
 	struct sta_info *sta;
 	__le16 fc;
 	struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
-	struct iwl4965_lq_sta *lq_sta;
+	struct iwl_lq_sta *lq_sta;
 
 	IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
 
@@ -2113,7 +2106,7 @@ static void rs_get_rate(void *priv_rate, struct net_device *dev,
 		goto out;
 	}
 
-	lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
+	lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
 	i = sta->last_txrate_idx;
 
 	if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
@@ -2149,14 +2142,14 @@ out:
 
 static void *rs_alloc_sta(void *priv_rate, gfp_t gfp)
 {
-	struct iwl4965_lq_sta *lq_sta;
+	struct iwl_lq_sta *lq_sta;
 	struct iwl_priv *priv;
 	int i, j;
 
 	priv = (struct iwl_priv *)priv_rate;
 	IWL_DEBUG_RATE("create station rate scale window\n");
 
-	lq_sta = kzalloc(sizeof(struct iwl4965_lq_sta), gfp);
+	lq_sta = kzalloc(sizeof(struct iwl_lq_sta), gfp);
 
 	if (lq_sta == NULL)
 		return NULL;
@@ -2165,7 +2158,7 @@ static void *rs_alloc_sta(void *priv_rate, gfp_t gfp)
 
 	for (j = 0; j < LQ_SIZE; j++)
 		for (i = 0; i < IWL_RATE_COUNT; i++)
-			rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i]));
+			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
 
 	return lq_sta;
 }
@@ -2178,7 +2171,7 @@ static void rs_rate_init(void *priv_rate, void *priv_sta,
 	struct ieee80211_conf *conf = &local->hw.conf;
 	struct ieee80211_supported_band *sband;
 	struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
-	struct iwl4965_lq_sta *lq_sta = priv_sta;
+	struct iwl_lq_sta *lq_sta = priv_sta;
 
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 
@@ -2187,7 +2180,7 @@ static void rs_rate_init(void *priv_rate, void *priv_sta,
 	sta->txrate_idx = 3;
 	for (j = 0; j < LQ_SIZE; j++)
 		for (i = 0; i < IWL_RATE_COUNT; i++)
-			rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i]));
+			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
 
 	IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n");
 	/* TODO: what is a good starting rate for STA? About middle? Maybe not
@@ -2271,10 +2264,9 @@ static void rs_rate_init(void *priv_rate, void *priv_sta,
 }
 
 static void rs_fill_link_cmd(const struct iwl_priv *priv,
-			     struct iwl4965_lq_sta *lq_sta,
-			     u32 new_rate)
+			     struct iwl_lq_sta *lq_sta, u32 new_rate)
 {
-	struct iwl4965_scale_tbl_info tbl_type;
+	struct iwl_scale_tbl_info tbl_type;
 	int index = 0;
 	int rate_idx;
 	int repeat_rate = 0;
@@ -2402,6 +2394,7 @@ static void rs_free(void *priv_rate)
 
 static void rs_clear(void *priv_rate)
 {
+#ifdef CONFIG_IWLWIFI_DEBUG
 	struct iwl_priv *priv = (struct iwl_priv *) priv_rate;
 
 	IWL_DEBUG_RATE("enter\n");
@@ -2409,11 +2402,12 @@ static void rs_clear(void *priv_rate)
 	/* TODO - add rate scale state reset */
 
 	IWL_DEBUG_RATE("leave\n");
+#endif /* CONFIG_IWLWIFI_DEBUG */
 }
 
 static void rs_free_sta(void *priv_rate, void *priv_sta)
 {
-	struct iwl4965_lq_sta *lq_sta = priv_sta;
+	struct iwl_lq_sta *lq_sta = priv_sta;
 	struct iwl_priv *priv;
 
 	priv = (struct iwl_priv *)priv_rate;
@@ -2429,8 +2423,8 @@ static int open_file_generic(struct inode *inode, struct file *file)
 	file->private_data = inode->i_private;
 	return 0;
 }
-static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta,
-				u32 *rate_n_flags, int index)
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+			     u32 *rate_n_flags, int index)
 {
 	struct iwl_priv *priv;
 
@@ -2453,7 +2447,7 @@ static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta,
 static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
 			const char __user *user_buf, size_t count, loff_t *ppos)
 {
-	struct iwl4965_lq_sta *lq_sta = file->private_data;
+	struct iwl_lq_sta *lq_sta = file->private_data;
 	struct iwl_priv *priv;
 	char buf[64];
 	int buf_size;
@@ -2493,7 +2487,7 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 	int desc = 0;
 	int i = 0;
 
-	struct iwl4965_lq_sta *lq_sta = file->private_data;
+	struct iwl_lq_sta *lq_sta = file->private_data;
 
 	desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
 	desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
@@ -2541,7 +2535,7 @@ static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
 	int desc = 0;
 	int i, j;
 
-	struct iwl4965_lq_sta *lq_sta = file->private_data;
+	struct iwl_lq_sta *lq_sta = file->private_data;
 	for (i = 0; i < LQ_SIZE; i++) {
 		desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n"
 				"rate=0x%X\n",
@@ -2570,7 +2564,7 @@ static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
 static void rs_add_debugfs(void *priv, void *priv_sta,
 					struct dentry *dir)
 {
-	struct iwl4965_lq_sta *lq_sta = priv_sta;
+	struct iwl_lq_sta *lq_sta = priv_sta;
 	lq_sta->rs_sta_dbgfs_scale_table_file =
 		debugfs_create_file("rate_scale_table", 0600, dir,
 				lq_sta, &rs_sta_dbgfs_scale_table_ops);
@@ -2585,7 +2579,7 @@ static void rs_add_debugfs(void *priv, void *priv_sta,
 
 static void rs_remove_debugfs(void *priv, void *priv_sta)
 {
-	struct iwl4965_lq_sta *lq_sta = priv_sta;
+	struct iwl_lq_sta *lq_sta = priv_sta;
 	debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
 	debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
 	debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
@@ -2609,104 +2603,12 @@ static struct rate_control_ops rs_ops = {
 #endif
 };
 
-int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id)
-{
-	struct ieee80211_local *local = hw_to_local(hw);
-	struct iwl_priv *priv = hw->priv;
-	struct iwl4965_lq_sta *lq_sta;
-	struct sta_info *sta;
-	int cnt = 0, i;
-	u32 samples = 0, success = 0, good = 0;
-	unsigned long now = jiffies;
-	u32 max_time = 0;
-	u8 lq_type, antenna;
-
-	rcu_read_lock();
-
-	sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr);
-	if (!sta || !sta->rate_ctrl_priv) {
-		if (sta)
-			IWL_DEBUG_RATE("leave - no private rate data!\n");
-		else
-			IWL_DEBUG_RATE("leave - no station!\n");
-		rcu_read_unlock();
-		return sprintf(buf, "station %d not found\n", sta_id);
-	}
-
-	lq_sta = (void *)sta->rate_ctrl_priv;
-
-	lq_type = lq_sta->lq_info[lq_sta->active_tbl].lq_type;
-	antenna = lq_sta->lq_info[lq_sta->active_tbl].ant_type;
-
-	if (is_legacy(lq_type))
-		i = IWL_RATE_54M_INDEX;
-	else
-		i = IWL_RATE_60M_INDEX;
-	while (1) {
-		u64 mask;
-		int j;
-		int active = lq_sta->active_tbl;
-
-		cnt +=
-		    sprintf(&buf[cnt], " %2dMbs: ", iwl_rates[i].ieee / 2);
-
-		mask = (1ULL << (IWL_RATE_MAX_WINDOW - 1));
-		for (j = 0; j < IWL_RATE_MAX_WINDOW; j++, mask >>= 1)
-			buf[cnt++] =
-				(lq_sta->lq_info[active].win[i].data & mask)
-				? '1' : '0';
-
-		samples += lq_sta->lq_info[active].win[i].counter;
-		good += lq_sta->lq_info[active].win[i].success_counter;
-		success += lq_sta->lq_info[active].win[i].success_counter *
-			   iwl_rates[i].ieee;
-
-		if (lq_sta->lq_info[active].win[i].stamp) {
-			int delta =
-				   jiffies_to_msecs(now -
-				   lq_sta->lq_info[active].win[i].stamp);
-
-			if (delta > max_time)
-				max_time = delta;
-
-			cnt += sprintf(&buf[cnt], "%5dms\n", delta);
-		} else
-			buf[cnt++] = '\n';
-
-		j = iwl4965_get_prev_ieee_rate(i);
-		if (j == i)
-			break;
-		i = j;
-	}
-
-	/*
-	 * Display the average rate of all samples taken.
-	 * NOTE: We multiply # of samples by 2 since the IEEE measurement
-	 * added from iwl_rates is actually 2X the rate.
-	 */
-	if (samples)
-		cnt += sprintf(&buf[cnt],
-			 "\nAverage rate is %3d.%02dMbs over last %4dms\n"
-			 "%3d%% success (%d good packets over %d tries)\n",
-			 success / (2 * samples), (success * 5 / samples) % 10,
-			 max_time, good * 100 / samples, good, samples);
-	else
-		cnt += sprintf(&buf[cnt], "\nAverage rate: 0Mbs\n");
-
-	cnt += sprintf(&buf[cnt], "\nrate scale type %d antenna %d "
-			 "active_search %d rate index %d\n", lq_type, antenna,
-			 lq_sta->search_better_tbl, sta->last_txrate_idx);
-
-	rcu_read_unlock();
-	return cnt;
-}
-
-int iwl4965_rate_control_register(void)
+int iwlagn_rate_control_register(void)
 {
 	return ieee80211_rate_control_register(&rs_ops);
 }
 
-void iwl4965_rate_control_unregister(void)
+void iwlagn_rate_control_unregister(void)
 {
 	ieee80211_rate_control_unregister(&rs_ops);
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
index 9b9972885aa..84d4d1e3375 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -24,8 +24,8 @@
  *
  *****************************************************************************/
 
-#ifndef __iwl_4965_rs_h__
-#define __iwl_4965_rs_h__
+#ifndef __iwl_agn_rs_h__
+#define __iwl_agn_rs_h__
 
 #include "iwl-dev.h"
 
@@ -88,7 +88,7 @@ enum {
 #define	IWL_RATE_5M_MASK   (1 << IWL_RATE_5M_INDEX)
 #define	IWL_RATE_11M_MASK  (1 << IWL_RATE_11M_INDEX)
 
-/* 4965 uCode API values for legacy bit rates, both OFDM and CCK */
+/* uCode API values for legacy bit rates, both OFDM and CCK */
 enum {
 	IWL_RATE_6M_PLCP  = 13,
 	IWL_RATE_9M_PLCP  = 15,
@@ -107,7 +107,7 @@ enum {
 	/*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/
 };
 
-/* 4965 uCode API values for OFDM high-throughput (HT) bit rates */
+/* uCode API values for OFDM high-throughput (HT) bit rates */
 enum {
 	IWL_RATE_SISO_6M_PLCP = 0,
 	IWL_RATE_SISO_12M_PLCP = 1,
@@ -287,15 +287,6 @@ static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index)
 }
 
 /**
- * iwl4965_fill_rs_info - Fill an output text buffer with the rate representation
- *
- * NOTE:  This is provided as a quick mechanism for a user to visualize
- * the performance of the rate control algorithm and is not meant to be
- * parsed software.
- */
-extern int iwl4965_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id);
-
-/**
  * iwl4965_rate_control_register - Register the rate control algorithm callbacks
  *
  * Since the rate control algorithm is hardware specific, there is no need
@@ -305,7 +296,7 @@ extern int iwl4965_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id);
  * ieee80211_register_hw
  *
  */
-extern int iwl4965_rate_control_register(void);
+extern int iwlagn_rate_control_register(void);
 
 /**
  * iwl4965_rate_control_unregister - Unregister the rate control callbacks
@@ -313,6 +304,6 @@ extern int iwl4965_rate_control_register(void);
  * This should be called after calling ieee80211_unregister_hw, but before
  * the driver is unloaded.
  */
-extern void iwl4965_rate_control_unregister(void);
+extern void iwlagn_rate_control_unregister(void);
 
-#endif
+#endif /* __iwl_agn__rs__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 71f5da3fe5c..e01f048a02d 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -29,7 +29,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -65,7 +64,7 @@
  * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk
  */
 
-#define DRV_DESCRIPTION	"Intel(R) Wireless WiFi Link 4965AGN driver for Linux"
+#define DRV_DESCRIPTION	"Intel(R) Wireless WiFi Link AGN driver for Linux"
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 #define VD "d"
@@ -73,7 +72,7 @@
 #define VD
 #endif
 
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
 #define VS "s"
 #else
 #define VS
@@ -86,6 +85,7 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION);
 MODULE_VERSION(DRV_VERSION);
 MODULE_AUTHOR(DRV_COPYRIGHT);
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("iwl4965");
 
 /*************** STATION TABLE MANAGEMENT ****
  * mac80211 should be examined to determine if sta_info is duplicating
@@ -181,14 +181,14 @@ static int iwl4965_check_rxon_cmd(struct iwl_rxon_cmd *rxon)
 }
 
 /**
- * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
+ * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
  * @priv: staging_rxon is compared to active_rxon
  *
  * If the RXON structure is changing enough to require a new tune,
  * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
  * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
  */
-static int iwl4965_full_rxon_required(struct iwl_priv *priv)
+static int iwl_full_rxon_required(struct iwl_priv *priv)
 {
 
 	/* These items are only settable from the full RXON command */
@@ -207,7 +207,6 @@ static int iwl4965_full_rxon_required(struct iwl_priv *priv)
 	     priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
 	    (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
 	     priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
-	    (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) ||
 	    (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
 		return 1;
 
@@ -263,7 +262,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
 	/* If we don't need to send a full RXON, we can use
 	 * iwl4965_rxon_assoc_cmd which is used to reconfigure filter
 	 * and other flags for the current radio configuration. */
-	if (!iwl4965_full_rxon_required(priv)) {
+	if (!iwl_full_rxon_required(priv)) {
 		ret = iwl_send_rxon_assoc(priv);
 		if (ret) {
 			IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret);
@@ -444,11 +443,10 @@ static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
 	list_add(&frame->list, &priv->free_frames);
 }
 
-unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv,
-				struct ieee80211_hdr *hdr,
-				const u8 *dest, int left)
+static unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv,
+					  struct ieee80211_hdr *hdr,
+					  const u8 *dest, int left)
 {
-
 	if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
 	    ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) &&
 	     (priv->iw_mode != IEEE80211_IF_TYPE_AP)))
@@ -487,6 +485,38 @@ static u8 iwl4965_rate_get_lowest_plcp(struct iwl_priv *priv)
 		return IWL_RATE_6M_PLCP;
 }
 
+unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv,
+				       struct iwl_frame *frame, u8 rate)
+{
+	struct iwl_tx_beacon_cmd *tx_beacon_cmd;
+	unsigned int frame_size;
+
+	tx_beacon_cmd = &frame->u.beacon;
+	memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
+
+	tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
+	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+	frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
+				iwl_bcast_addr,
+				sizeof(frame->u) - sizeof(*tx_beacon_cmd));
+
+	BUG_ON(frame_size > MAX_MPDU_SIZE);
+	tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
+
+	if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP))
+		tx_beacon_cmd->tx.rate_n_flags =
+			iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK);
+	else
+		tx_beacon_cmd->tx.rate_n_flags =
+			iwl_hw_set_rate_n_flags(rate, 0);
+
+	tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
+				     TX_CMD_FLG_TSF_MSK |
+				     TX_CMD_FLG_STA_RATE_MSK;
+
+	return sizeof(*tx_beacon_cmd) + frame_size;
+}
 static int iwl4965_send_beacon_cmd(struct iwl_priv *priv)
 {
 	struct iwl_frame *frame;
@@ -556,8 +586,6 @@ static void iwl4965_ht_conf(struct iwl_priv *priv,
 		iwl_conf->supported_chan_width = 0;
 	}
 
-	iwl_conf->tx_mimo_ps_mode =
-		(u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
 	memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16);
 
 	iwl_conf->control_channel = ht_bss_conf->primary_channel;
@@ -608,7 +636,6 @@ static void iwl_activate_qos(struct iwl_priv *priv, u8 force)
 }
 
 #define MAX_UCODE_BEACON_INTERVAL	4096
-#define INTEL_CONN_LISTEN_INTERVAL	__constant_cpu_to_le16(0xA)
 
 static __le16 iwl4965_adjust_beacon_interval(u16 beacon_val)
 {
@@ -638,7 +665,7 @@ static void iwl4965_setup_rxon_timing(struct iwl_priv *priv)
 	priv->rxon_timing.timestamp.dw[0] =
 				cpu_to_le32(priv->timestamp & 0xFFFFFFFF);
 
-	priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL;
+	priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval);
 
 	tsf = priv->timestamp;
 
@@ -853,7 +880,7 @@ static void iwl4965_set_rate(struct iwl_priv *priv)
 		   (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
 }
 
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
 
 #include "iwl-spectrum.h"
 
@@ -1057,7 +1084,7 @@ static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 static void iwl4965_rx_spectrum_measure_notif(struct iwl_priv *priv,
 					  struct iwl_rx_mem_buffer *rxb)
 {
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 	struct iwl4965_spectrum_notification *report = &(pkt->u.spectrum_notif);
 
@@ -1231,6 +1258,37 @@ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv,
 		wake_up_interruptible(&priv->wait_command_queue);
 }
 
+int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	ret = iwl_grab_nic_access(priv);
+	if (ret)
+		goto err;
+
+	if (src == IWL_PWR_SRC_VAUX) {
+		u32 val;
+		ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE,
+					    &val);
+
+		if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT)
+			iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
+					       APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
+					       ~APMG_PS_CTRL_MSK_PWR_SRC);
+	} else {
+		iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
+				       APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
+				       ~APMG_PS_CTRL_MSK_PWR_SRC);
+	}
+
+	iwl_release_nic_access(priv);
+err:
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return ret;
+}
+
 /**
  * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks
  *
@@ -2129,7 +2187,10 @@ static void __iwl4965_down(struct iwl_priv *priv)
 	udelay(5);
 
 	/* FIXME: apm_ops.suspend(priv) */
-	priv->cfg->ops->lib->apm_ops.reset(priv);
+	if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status))
+		priv->cfg->ops->lib->apm_ops.stop(priv);
+	else
+		priv->cfg->ops->lib->apm_ops.reset(priv);
 	priv->cfg->ops->lib->free_shared_mem(priv);
 
  exit:
@@ -2170,17 +2231,16 @@ static int __iwl4965_up(struct iwl_priv *priv)
 	}
 
 	/* If platform's RF_KILL switch is NOT set to KILL */
-	if (iwl_read32(priv, CSR_GP_CNTRL) &
-				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
 	else
 		set_bit(STATUS_RF_KILL_HW, &priv->status);
 
-	if (!test_bit(STATUS_IN_SUSPEND, &priv->status) &&
-	    iwl_is_rfkill(priv)) {
+	if (iwl_is_rfkill(priv)) {
+		iwl4965_enable_interrupts(priv);
 		IWL_WARNING("Radio disabled by %s RF Kill switch\n",
 		    test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW");
-		return -ENODEV;
+		return 0;
 	}
 
 	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
@@ -2216,11 +2276,6 @@ static int __iwl4965_up(struct iwl_priv *priv)
 	memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
 	       priv->ucode_data.len);
 
-	/* We return success when we resume from suspend and rf_kill is on. */
-	if (test_bit(STATUS_RF_KILL_HW, &priv->status) ||
-	    test_bit(STATUS_RF_KILL_SW, &priv->status))
-		return 0;
-
 	for (i = 0; i < MAX_HW_RESTARTS; i++) {
 
 		iwl_clear_stations_table(priv);
@@ -2415,7 +2470,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv)
 	unsigned long flags;
 
 	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
-		IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__);
+		IWL_ERROR("%s Should not be called in AP mode\n", __func__);
 		return;
 	}
 
@@ -2491,7 +2546,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv)
 
 	default:
 		IWL_ERROR("%s Should not be called in %d mode\n",
-				__FUNCTION__, priv->iw_mode);
+			  __func__, priv->iw_mode);
 		break;
 	}
 
@@ -2547,6 +2602,7 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw)
 {
 	struct iwl_priv *priv = hw->priv;
 	int ret;
+	u16 pci_cmd;
 
 	IWL_DEBUG_MAC80211("enter\n");
 
@@ -2557,6 +2613,13 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw)
 	pci_restore_state(priv->pci_dev);
 	pci_enable_msi(priv->pci_dev);
 
+	/* enable interrupts if needed: hw bug w/a */
+	pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
+	if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
+		pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
+		pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
+	}
+
 	ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED,
 			  DRV_NAME, priv);
 	if (ret) {
@@ -2589,6 +2652,9 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw)
 	if (ret)
 		goto out_release_irq;
 
+	if (iwl_is_rfkill(priv))
+		goto out;
+
 	IWL_DEBUG_INFO("Start UP work done.\n");
 
 	if (test_bit(STATUS_IN_SUSPEND, &priv->status))
@@ -2608,6 +2674,7 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw)
 		}
 	}
 
+out:
 	priv->is_open = 1;
 	IWL_DEBUG_MAC80211("leave\n");
 	return 0;
@@ -2659,7 +2726,7 @@ static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct iwl_priv *priv = hw->priv;
 
-	IWL_DEBUG_MAC80211("enter\n");
+	IWL_DEBUG_MACDUMP("enter\n");
 
 	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
 		IWL_DEBUG_MAC80211("leave - monitor\n");
@@ -2673,7 +2740,7 @@ static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	if (iwl_tx_skb(priv, skb))
 		dev_kfree_skb_any(skb);
 
-	IWL_DEBUG_MAC80211("leave\n");
+	IWL_DEBUG_MACDUMP("leave\n");
 	return 0;
 }
 
@@ -2773,6 +2840,7 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co
 
 	spin_lock_irqsave(&priv->lock, flags);
 
+
 	/* if we are switching from ht to 2.4 clear flags
 	 * from any ht related info since 2.4 does not
 	 * support ht */
@@ -3102,6 +3170,7 @@ static void iwl4965_bss_info_changed(struct ieee80211_hw *hw,
 		if (bss_conf->assoc) {
 			priv->assoc_id = bss_conf->aid;
 			priv->beacon_int = bss_conf->beacon_int;
+			priv->power_data.dtim_period = bss_conf->dtim_period;
 			priv->timestamp = bss_conf->timestamp;
 			priv->assoc_capability = bss_conf->assoc_capability;
 			priv->next_scan_jiffies = jiffies +
@@ -3345,6 +3414,39 @@ static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	return 0;
 }
 
+static int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw,
+			     enum ieee80211_ampdu_mlme_action action,
+			     const u8 *addr, u16 tid, u16 *ssn)
+{
+	struct iwl_priv *priv = hw->priv;
+	DECLARE_MAC_BUF(mac);
+
+	IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n",
+		     print_mac(mac, addr), tid);
+
+	if (!(priv->cfg->sku & IWL_SKU_N))
+		return -EACCES;
+
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+		IWL_DEBUG_HT("start Rx\n");
+		return iwl_rx_agg_start(priv, addr, tid, *ssn);
+	case IEEE80211_AMPDU_RX_STOP:
+		IWL_DEBUG_HT("stop Rx\n");
+		return iwl_rx_agg_stop(priv, addr, tid);
+	case IEEE80211_AMPDU_TX_START:
+		IWL_DEBUG_HT("start Tx\n");
+		return iwl_tx_agg_start(priv, addr, tid, ssn);
+	case IEEE80211_AMPDU_TX_STOP:
+		IWL_DEBUG_HT("stop Tx\n");
+		return iwl_tx_agg_stop(priv, addr, tid);
+	default:
+		IWL_DEBUG_HT("unknown\n");
+		return -EINVAL;
+		break;
+	}
+	return 0;
+}
 static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw,
 				struct ieee80211_tx_queue_stats *stats)
 {
@@ -3486,7 +3588,7 @@ static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk
 
 	priv->assoc_id = 0;
 	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
-	priv->timestamp = le64_to_cpu(timestamp) +  (priv->beacon_int * 1000);
+	priv->timestamp = le64_to_cpu(timestamp);
 
 	IWL_DEBUG_MAC80211("leave\n");
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -3592,15 +3694,6 @@ static ssize_t show_temperature(struct device *d,
 
 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
 
-static ssize_t show_rs_window(struct device *d,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	struct iwl_priv *priv = d->driver_data;
-	return iwl4965_fill_rs_info(priv->hw, buf, IWL_AP_ID);
-}
-static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL);
-
 static ssize_t show_tx_power(struct device *d,
 			     struct device_attribute *attr, char *buf)
 {
@@ -3699,7 +3792,7 @@ static ssize_t store_filter_flags(struct device *d,
 static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
 		   store_filter_flags);
 
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
 
 static ssize_t show_measurement(struct device *d,
 				struct device_attribute *attr, char *buf)
@@ -3707,7 +3800,7 @@ static ssize_t show_measurement(struct device *d,
 	struct iwl_priv *priv = dev_get_drvdata(d);
 	struct iwl4965_spectrum_notification measure_report;
 	u32 size = sizeof(measure_report), len = 0, ofs = 0;
-	u8 *data = (u8 *) & measure_report;
+	u8 *data = (u8 *)&measure_report;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -3770,7 +3863,7 @@ static ssize_t store_measurement(struct device *d,
 
 static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
 		   show_measurement, store_measurement);
-#endif /* CONFIG_IWL4965_SPECTRUM_MEASUREMENT */
+#endif /* CONFIG_IWLAGN_SPECTRUM_MEASUREMENT */
 
 static ssize_t store_retry_rate(struct device *d,
 				struct device_attribute *attr,
@@ -3800,77 +3893,54 @@ static ssize_t store_power_level(struct device *d,
 				 const char *buf, size_t count)
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
-	int rc;
+	int ret;
 	int mode;
 
 	mode = simple_strtoul(buf, NULL, 0);
 	mutex_lock(&priv->mutex);
 
 	if (!iwl_is_ready(priv)) {
-		rc = -EAGAIN;
+		ret = -EAGAIN;
 		goto out;
 	}
 
-	rc = iwl_power_set_user_mode(priv, mode);
-	if (rc) {
+	ret = iwl_power_set_user_mode(priv, mode);
+	if (ret) {
 		IWL_DEBUG_MAC80211("failed setting power mode.\n");
 		goto out;
 	}
-	rc = count;
+	ret = count;
 
  out:
 	mutex_unlock(&priv->mutex);
-	return rc;
+	return ret;
 }
 
-#define MAX_WX_STRING 80
-
-/* Values are in microsecond */
-static const s32 timeout_duration[] = {
-	350000,
-	250000,
-	75000,
-	37000,
-	25000,
-};
-static const s32 period_duration[] = {
-	400000,
-	700000,
-	1000000,
-	1000000,
-	1000000
-};
-
 static ssize_t show_power_level(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
+	int mode = priv->power_data.user_power_setting;
+	int system = priv->power_data.system_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	p += sprintf(p, "%d ", level);
-	switch (level) {
-	case IWL_POWER_MODE_CAM:
-	case IWL_POWER_AC:
-		p += sprintf(p, "(AC)");
+	switch (system) {
+	case IWL_POWER_SYS_AUTO:
+		p += sprintf(p, "SYSTEM:auto");
 		break;
-	case IWL_POWER_BATTERY:
-		p += sprintf(p, "(BATTERY)");
+	case IWL_POWER_SYS_AC:
+		p += sprintf(p, "SYSTEM:ac");
+		break;
+	case IWL_POWER_SYS_BATTERY:
+		p += sprintf(p, "SYSTEM:battery");
 		break;
-	default:
-		p += sprintf(p,
-			     "(Timeout %dms, Period %dms)",
-			     timeout_duration[level - 1] / 1000,
-			     period_duration[level - 1] / 1000);
 	}
-/*
-	if (!(priv->power_mode & IWL_POWER_ENABLED))
-		p += sprintf(p, " OFF\n");
-	else
-		p += sprintf(p, " \n");
-*/
-	p += sprintf(p, " \n");
-	return (p - buf + 1);
+
+	p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO)?"fixed":"auto");
+	p += sprintf(p, "\tINDEX:%d", level);
+	p += sprintf(p, "\n");
+	return p - buf + 1;
 }
 
 static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
@@ -3945,7 +4015,7 @@ static ssize_t show_statistics(struct device *d,
 	struct iwl_priv *priv = dev_get_drvdata(d);
 	u32 size = sizeof(struct iwl_notif_statistics);
 	u32 len = 0, ofs = 0;
-	u8 *data = (u8 *) & priv->statistics;
+	u8 *data = (u8 *)&priv->statistics;
 	int rc = 0;
 
 	if (!iwl_is_alive(priv))
@@ -4041,12 +4111,11 @@ static struct attribute *iwl4965_sysfs_entries[] = {
 	&dev_attr_channels.attr,
 	&dev_attr_flags.attr,
 	&dev_attr_filter_flags.attr,
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
 	&dev_attr_measurement.attr,
 #endif
 	&dev_attr_power_level.attr,
 	&dev_attr_retry_rate.attr,
-	&dev_attr_rs_window.attr,
 	&dev_attr_statistics.attr,
 	&dev_attr_status.attr,
 	&dev_attr_temperature.attr,
@@ -4303,15 +4372,18 @@ static void __devexit iwl4965_pci_remove(struct pci_dev *pdev)
 	iwl_dbgfs_unregister(priv);
 	sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group);
 
+	/* ieee80211_unregister_hw call wil cause iwl4965_mac_stop to
+	 * to be called and iwl4965_down since we are removing the device
+	 * we need to set STATUS_EXIT_PENDING bit.
+	 */
+	set_bit(STATUS_EXIT_PENDING, &priv->status);
 	if (priv->mac80211_registered) {
 		ieee80211_unregister_hw(priv->hw);
 		priv->mac80211_registered = 0;
+	} else {
+		iwl4965_down(priv);
 	}
 
-	set_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	iwl4965_down(priv);
-
 	/* make sure we flush any pending irq or
 	 * tasklet for the driver
 	 */
@@ -4394,8 +4466,10 @@ static int iwl4965_pci_resume(struct pci_dev *pdev)
 
 /* Hardware specific file defines the PCI IDs table for that hardware module */
 static struct pci_device_id iwl_hw_card_ids[] = {
+#ifdef CONFIG_IWL4965
 	{IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
 	{IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
+#endif /* CONFIG_IWL4965 */
 #ifdef CONFIG_IWL5000
 	{IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bg_cfg)},
 	{IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bg_cfg)},
@@ -4431,7 +4505,7 @@ static int __init iwl4965_init(void)
 	printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
 	printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
 
-	ret = iwl4965_rate_control_register();
+	ret = iwlagn_rate_control_register();
 	if (ret) {
 		IWL_ERROR("Unable to register rate control algorithm: %d\n", ret);
 		return ret;
@@ -4446,14 +4520,14 @@ static int __init iwl4965_init(void)
 	return ret;
 
 error_register:
-	iwl4965_rate_control_unregister();
+	iwlagn_rate_control_unregister();
 	return ret;
 }
 
 static void __exit iwl4965_exit(void)
 {
 	pci_unregister_driver(&iwl_driver);
-	iwl4965_rate_control_unregister();
+	iwlagn_rate_control_unregister();
 }
 
 module_exit(iwl4965_exit);
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index e9bb1de0ce3..28b5b09996e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -666,8 +666,7 @@ struct iwl4965_rxon_assoc_cmd {
 	__le16 reserved;
 } __attribute__ ((packed));
 
-
-
+#define IWL_CONN_MAX_LISTEN_INTERVAL	10
 
 /*
  * REPLY_RXON_TIMING = 0x14 (command, has simple generic response)
@@ -1076,10 +1075,12 @@ struct iwl4965_rx_frame {
 } __attribute__ ((packed));
 
 /* Fixed (non-configurable) rx data from phy */
-#define RX_PHY_FLAGS_ANTENNAE_OFFSET		(4)
-#define RX_PHY_FLAGS_ANTENNAE_MASK		(0x70)
-#define IWL_AGC_DB_MASK 	(0x3f80)	/* MASK(7,13) */
-#define IWL_AGC_DB_POS		(7)
+
+#define IWL49_RX_RES_PHY_CNT 14
+#define IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET	(4)
+#define IWL49_RX_PHY_FLAGS_ANTENNAE_MASK	(0x70)
+#define IWL49_AGC_DB_MASK			(0x3f80)	/* MASK(7,13) */
+#define IWL49_AGC_DB_POS			(7)
 struct iwl4965_rx_non_cfg_phy {
 	__le16 ant_selection;	/* ant A bit 4, ant B bit 5, ant C bit 6 */
 	__le16 agc_info;	/* agc code 0:6, agc dB 7:13, reserved 14:15 */
@@ -1087,12 +1088,30 @@ struct iwl4965_rx_non_cfg_phy {
 	u8 pad[0];
 } __attribute__ ((packed));
 
+
+#define IWL50_RX_RES_PHY_CNT 8
+#define IWL50_RX_RES_AGC_IDX     1
+#define IWL50_RX_RES_RSSI_AB_IDX 2
+#define IWL50_RX_RES_RSSI_C_IDX  3
+#define IWL50_OFDM_AGC_MSK 0xfe00
+#define IWL50_OFDM_AGC_BIT_POS 9
+#define IWL50_OFDM_RSSI_A_MSK 0x00ff
+#define IWL50_OFDM_RSSI_A_BIT_POS 0
+#define IWL50_OFDM_RSSI_B_MSK 0xff0000
+#define IWL50_OFDM_RSSI_B_BIT_POS 16
+#define IWL50_OFDM_RSSI_C_MSK 0x00ff
+#define IWL50_OFDM_RSSI_C_BIT_POS 0
+
+struct iwl5000_non_cfg_phy {
+	__le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT];  /* upto 8 phy entries */
+} __attribute__ ((packed));
+
+
 /*
  * REPLY_RX = 0xc3 (response only, not a command)
  * Used only for legacy (non 11n) frames.
  */
-#define RX_RES_PHY_CNT 14
-struct iwl4965_rx_phy_res {
+struct iwl_rx_phy_res {
 	u8 non_cfg_phy_cnt;     /* non configurable DSP phy data byte count */
 	u8 cfg_phy_cnt;		/* configurable DSP phy data byte count */
 	u8 stat_id;		/* configurable DSP phy data set ID */
@@ -1101,8 +1120,7 @@ struct iwl4965_rx_phy_res {
 	__le32 beacon_time_stamp; /* beacon at on-air rise */
 	__le16 phy_flags;	/* general phy flags: band, modulation, ... */
 	__le16 channel;		/* channel number */
-	__le16 non_cfg_phy[RX_RES_PHY_CNT];	/* upto 14 phy entries */
-	__le32 reserved2;
+	u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */
 	__le32 rate_n_flags;	/* RATE_MCS_* */
 	__le16 byte_count;	/* frame's byte-count */
 	__le16 reserved3;
@@ -1993,7 +2011,7 @@ struct iwl4965_spectrum_notification {
  *****************************************************************************/
 
 /**
- * struct iwl4965_powertable_cmd - Power Table Command
+ * struct iwl_powertable_cmd - Power Table Command
  * @flags: See below:
  *
  * POWER_TABLE_CMD = 0x77 (command, has simple generic response)
@@ -2027,7 +2045,7 @@ struct iwl4965_spectrum_notification {
 #define IWL_POWER_PCI_PM_MSK			__constant_cpu_to_le16(1 << 3)
 #define IWL_POWER_FAST_PD			__constant_cpu_to_le16(1 << 4)
 
-struct iwl4965_powertable_cmd {
+struct iwl_powertable_cmd {
 	__le16 flags;
 	u8 keep_alive_seconds;
 	u8 debug_flags;
@@ -2324,7 +2342,7 @@ struct iwl4965_beacon_notif {
 /*
  * REPLY_TX_BEACON = 0x91 (command, has simple generic response)
  */
-struct iwl4965_tx_beacon_cmd {
+struct iwl_tx_beacon_cmd {
 	struct iwl_tx_cmd tx;
 	__le16 tim_idx;
 	u8 tim_size;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index a44188bf445..80f2f84defa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -28,7 +28,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <net/mac80211.h>
 
 struct iwl_priv; /* FIXME: remove */
@@ -383,8 +382,8 @@ void iwl_reset_qos(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_reset_qos);
 
-#define MAX_BIT_RATE_40_MHZ 0x96; /* 150 Mbps */
-#define MAX_BIT_RATE_20_MHZ 0x48; /* 72 Mbps */
+#define MAX_BIT_RATE_40_MHZ 0x96 /* 150 Mbps */
+#define MAX_BIT_RATE_20_MHZ 0x48 /* 72 Mbps */
 static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
 			      struct ieee80211_ht_info *ht_info,
 			      enum ieee80211_band band)
@@ -593,12 +592,11 @@ static void iwlcore_free_geos(struct iwl_priv *priv)
 	clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
 }
 
-static u8 is_single_rx_stream(struct iwl_priv *priv)
+static bool is_single_rx_stream(struct iwl_priv *priv)
 {
 	return !priv->current_ht_config.is_ht ||
 	       ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
-		(priv->current_ht_config.supp_mcs_set[2] == 0)) ||
-	       priv->ps_mode == IWL_MIMO_PS_STATIC;
+		(priv->current_ht_config.supp_mcs_set[2] == 0));
 }
 
 static u8 iwl_is_channel_extension(struct iwl_priv *priv,
@@ -705,33 +703,39 @@ EXPORT_SYMBOL(iwl_set_rxon_ht);
  * MIMO (dual stream) requires at least 2, but works better with 3.
  * This does not determine *which* chains to use, just how many.
  */
-static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
-					u8 *idle_state, u8 *rx_state)
+static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
 {
-	u8 is_single = is_single_rx_stream(priv);
-	u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
+	bool is_single = is_single_rx_stream(priv);
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
 
 	/* # of Rx chains to use when expecting MIMO. */
 	if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
-		*rx_state = 2;
+		return 2;
 	else
-		*rx_state = 3;
+		return 3;
+}
 
+static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
+{
+	int idle_cnt;
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
 	/* # Rx chains when idling and maybe trying to save power */
 	switch (priv->ps_mode) {
 	case IWL_MIMO_PS_STATIC:
 	case IWL_MIMO_PS_DYNAMIC:
-		*idle_state = (is_cam) ? 2 : 1;
+		idle_cnt = (is_cam) ? 2 : 1;
 		break;
 	case IWL_MIMO_PS_NONE:
-		*idle_state = (is_cam) ? *rx_state : 1;
+		idle_cnt = (is_cam) ? active_cnt : 1;
 		break;
+	case IWL_MIMO_PS_INVALID:
 	default:
-		*idle_state = 1;
+		IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode);
+		WARN_ON(1);
+		idle_cnt = -1;
 		break;
 	}
-
-	return 0;
+	return idle_cnt;
 }
 
 /**
@@ -742,34 +746,44 @@ static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
  */
 void iwl_set_rxon_chain(struct iwl_priv *priv)
 {
-	u8 is_single = is_single_rx_stream(priv);
-	u8 idle_state, rx_state;
-
-	priv->staging_rxon.rx_chain = 0;
-	rx_state = idle_state = 3;
+	bool is_single = is_single_rx_stream(priv);
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
+	u8 idle_rx_cnt, active_rx_cnt;
+	u16 rx_chain;
 
 	/* Tell uCode which antennas are actually connected.
 	 * Before first association, we assume all antennas are connected.
 	 * Just after first association, iwl_chain_noise_calibration()
 	 *    checks which antennas actually *are* connected. */
-	priv->staging_rxon.rx_chain |=
-		    cpu_to_le16(priv->hw_params.valid_rx_ant <<
-						 RXON_RX_CHAIN_VALID_POS);
+	rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
 
 	/* How many receivers should we use? */
-	iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state);
-	priv->staging_rxon.rx_chain |=
-		cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
-	priv->staging_rxon.rx_chain |=
-		cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
-
-	if (!is_single && (rx_state >= 2) &&
-	    !test_bit(STATUS_POWER_PMI, &priv->status))
+	active_rx_cnt = iwl_get_active_rx_chain_count(priv);
+	idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
+
+	/* correct rx chain count accoridng hw settings */
+	if (priv->hw_params.rx_chains_num < active_rx_cnt)
+		active_rx_cnt = priv->hw_params.rx_chains_num;
+
+	if (priv->hw_params.rx_chains_num < idle_rx_cnt)
+		idle_rx_cnt = priv->hw_params.rx_chains_num;
+
+	rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
+	rx_chain |= idle_rx_cnt  << RXON_RX_CHAIN_CNT_POS;
+
+	priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
+
+	if (!is_single && (active_rx_cnt >= 2) && is_cam)
 		priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
 	else
 		priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
 
-	IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
+	IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n",
+			priv->staging_rxon.rx_chain,
+			active_rx_cnt, idle_rx_cnt);
+
+	WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
+		active_rx_cnt < idle_rx_cnt);
 }
 EXPORT_SYMBOL(iwl_set_rxon_chain);
 
@@ -815,11 +829,10 @@ int iwl_setup_mac(struct iwl_priv *priv)
 {
 	int ret;
 	struct ieee80211_hw *hw = priv->hw;
-	hw->rate_control_algorithm = "iwl-4965-rs";
+	hw->rate_control_algorithm = "iwl-agn-rs";
 
 	/* Tell mac80211 our characteristics */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_SIGNAL_DBM |
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
@@ -828,6 +841,7 @@ int iwl_setup_mac(struct iwl_priv *priv)
 		hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues;
 
 	hw->conf.beacon_int = 100;
+	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
 
 	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
 		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index db66114f1e5..64f139e9744 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -95,6 +95,8 @@ struct iwl_hcmd_utils_ops {
 	void (*chain_noise_reset)(struct iwl_priv *priv);
 	void (*rts_tx_cmd_flag)(struct ieee80211_tx_info *info,
 			__le32 *tx_flags);
+	int  (*calc_rssi)(struct iwl_priv *priv,
+			  struct iwl_rx_phy_res *rx_resp);
 };
 
 struct iwl_lib_ops {
@@ -139,7 +141,6 @@ struct iwl_lib_ops {
 		int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src);
 	} apm_ops;
 	/* power */
-	int (*set_power)(struct iwl_priv *priv, void *cmd);
 	int (*send_tx_power) (struct iwl_priv *priv);
 	void (*update_chain_flags)(struct iwl_priv *priv);
 	void (*temperature) (struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 545ed692d88..52629fbd835 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -104,6 +104,7 @@
  *  3-2:  0 = A, 1 = B, 2 = C, 3 = D step
  */
 #define CSR_HW_REV_WA_REG	(CSR_BASE+0x22C)
+#define CSR_DBG_HPET_MEM_REG	(CSR_BASE+0x240)
 
 /* Bits for CSR_HW_IF_CONFIG_REG */
 #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R	(0x00000010)
@@ -118,7 +119,12 @@
 #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A    (0x00000000)
 #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B    (0x00001000)
 
-#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM     (0x00200000)
+#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A		(0x00080000)
+#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM		(0x00200000)
+#define CSR_HW_IF_CONFIG_REG_BIT_PCI_OWN_SEM		(0x00400000)
+#define CSR_HW_IF_CONFIG_REG_BIT_ME_OWN			(0x02000000)
+#define CSR_HW_IF_CONFIG_REG_BIT_WAKE_ME		(0x08000000)
+
 
 /* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
  * acknowledged (reset) by host writing "1" to flagged bits. */
@@ -236,6 +242,8 @@
 #define CSR39_ANA_PLL_CFG_VAL        (0x01000000)
 #define CSR50_ANA_PLL_CFG_VAL        (0x00880300)
 
+/* HPET MEM debug */
+#define CSR_DBG_HPET_MEM_REG_VAL	(0xFFFF0000)
 /*=== HBUS (Host-side Bus) ===*/
 #define HBUS_BASE	(0x400)
 /*
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 58384805a49..d2daa174df2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -33,12 +33,12 @@
 #define IWL_DEBUG(level, fmt, args...) \
 do { if (priv->debug_level & (level)) \
   dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \
-	 in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+	 in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
 
 #define IWL_DEBUG_LIMIT(level, fmt, args...) \
 do { if ((priv->debug_level & (level)) && net_ratelimit()) \
   dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \
-	 in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+	 in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 struct iwl_debugfs {
@@ -68,12 +68,8 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv);
 #endif
 
 #else
-static inline void IWL_DEBUG(int level, const char *fmt, ...)
-{
-}
-static inline void IWL_DEBUG_LIMIT(int level, const char *fmt, ...)
-{
-}
+#define IWL_DEBUG(level, fmt, args...)
+#define IWL_DEBUG_LIMIT(level, fmt, args...)
 #endif				/* CONFIG_IWLWIFI_DEBUG */
 
 
@@ -118,7 +114,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
 #define IWL_DL_MAC80211      (1 << 1)
 #define IWL_DL_HOST_COMMAND  (1 << 2)
 #define IWL_DL_STATE         (1 << 3)
-
+#define IWL_DL_MACDUMP		(1 << 4)
 #define IWL_DL_RADIO         (1 << 7)
 #define IWL_DL_POWER         (1 << 8)
 #define IWL_DL_TEMP          (1 << 9)
@@ -158,6 +154,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
 #define IWL_DEBUG_INFO(f, a...)    IWL_DEBUG(IWL_DL_INFO, f, ## a)
 
 #define IWL_DEBUG_MAC80211(f, a...)     IWL_DEBUG(IWL_DL_MAC80211, f, ## a)
+#define IWL_DEBUG_MACDUMP(f, a...)     IWL_DEBUG(IWL_DL_MACDUMP, f, ## a)
 #define IWL_DEBUG_TEMP(f, a...)   IWL_DEBUG(IWL_DL_TEMP, f, ## a)
 #define IWL_DEBUG_SCAN(f, a...)   IWL_DEBUG(IWL_DL_SCAN, f, ## a)
 #define IWL_DEBUG_RX(f, a...)     IWL_DEBUG(IWL_DL_RX, f, ## a)
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index ed948dc59b3..20db0eb636a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -231,7 +231,7 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf,
 	DECLARE_MAC_BUF(mac);
 
 	buf = kmalloc(bufsz, GFP_KERNEL);
-	if(!buf)
+	if (!buf)
 		return -ENOMEM;
 
 	pos += scnprintf(buf + pos, bufsz - pos, "num of stations: %d\n\n",
@@ -364,16 +364,19 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 {
 	struct iwl_debugfs *dbgfs;
 	struct dentry *phyd = priv->hw->wiphy->debugfsdir;
+	int ret = 0;
 
 	dbgfs = kzalloc(sizeof(struct iwl_debugfs), GFP_KERNEL);
 	if (!dbgfs) {
+		ret = -ENOMEM;
 		goto err;
 	}
 
 	priv->dbgfs = dbgfs;
 	dbgfs->name = name;
 	dbgfs->dir_drv = debugfs_create_dir(name, phyd);
-	if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)){
+	if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)) {
+		ret = -ENOENT;
 		goto err;
 	}
 
@@ -394,7 +397,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 err:
 	IWL_ERROR("Can't open the debugfs directory\n");
 	iwl_dbgfs_unregister(priv);
-	return -ENOENT;
+	return ret;
 }
 EXPORT_SYMBOL(iwl_dbgfs_register);
 
@@ -404,7 +407,7 @@ EXPORT_SYMBOL(iwl_dbgfs_register);
  */
 void iwl_dbgfs_unregister(struct iwl_priv *priv)
 {
-	if (!(priv->dbgfs))
+	if (!priv->dbgfs)
 		return;
 
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_eeprom);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 4d789e353e3..cdfb343c7ec 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -36,7 +36,7 @@
 #include <linux/kernel.h>
 #include <net/ieee80211_radiotap.h>
 
-#define DRV_NAME        "iwl4965"
+#define DRV_NAME        "iwlagn"
 #include "iwl-rfkill.h"
 #include "iwl-eeprom.h"
 #include "iwl-4965-hw.h"
@@ -45,6 +45,7 @@
 #include "iwl-debug.h"
 #include "iwl-led.h"
 #include "iwl-power.h"
+#include "iwl-agn-rs.h"
 
 /* configuration for the iwl4965 */
 extern struct iwl_cfg iwl4965_agn_cfg;
@@ -134,8 +135,7 @@ struct iwl_tx_info {
 struct iwl_tx_queue {
 	struct iwl_queue q;
 	struct iwl_tfd_frame *bd;
-	struct iwl_cmd *cmd;
-	dma_addr_t dma_addr_cmd;
+	struct iwl_cmd *cmd[TFD_TX_CMD_SLOTS];
 	struct iwl_tx_info *txb;
 	int need_update;
 	int sched_retry;
@@ -191,7 +191,6 @@ struct iwl4965_clip_group {
 	const s8 clip_powers[IWL_MAX_RATES];
 };
 
-#include "iwl-4965-rs.h"
 
 #define IWL_TX_FIFO_AC0	0
 #define IWL_TX_FIFO_AC1	1
@@ -219,7 +218,7 @@ enum iwl_pwr_src {
 struct iwl_frame {
 	union {
 		struct ieee80211_hdr frame;
-		struct iwl4965_tx_beacon_cmd beacon;
+		struct iwl_tx_beacon_cmd beacon;
 		u8 raw[IEEE80211_FRAME_LEN];
 		u8 cmd[360];
 	} u;
@@ -283,10 +282,9 @@ struct iwl_cmd {
 		u32 val32;
 		struct iwl4965_bt_cmd bt;
 		struct iwl4965_rxon_time_cmd rxon_time;
-		struct iwl4965_powertable_cmd powertable;
+		struct iwl_powertable_cmd powertable;
 		struct iwl_qosparam_cmd qosparam;
 		struct iwl_tx_cmd tx;
-		struct iwl4965_tx_beacon_cmd tx_beacon;
 		struct iwl4965_rxon_assoc_cmd rxon_assoc;
 		struct iwl_rem_sta_cmd rm_sta;
 		u8 *indirect;
@@ -414,7 +412,6 @@ struct iwl_ht_info {
 	/* self configuration data */
 	u8 is_ht;
 	u8 supported_chan_width;
-	u16 tx_mimo_ps_mode;
 	u8 is_green_field;
 	u8 sgf;			/* HT_SHORT_GI_* short guard interval */
 	u8 max_amsdu_size;
@@ -590,6 +587,7 @@ extern unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv,
 					const u8 *dest, int left);
 extern void iwl4965_update_chain_flags(struct iwl_priv *priv);
 int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src);
+extern int iwl4965_set_power(struct iwl_priv *priv, void *cmd);
 
 extern const u8 iwl_bcast_addr[ETH_ALEN];
 
@@ -642,10 +640,6 @@ struct iwl_priv;
  * Forward declare iwl-4965.c functions for iwl-base.c
  */
 extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv);
-
-int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw,
-				    enum ieee80211_ampdu_mlme_action action,
-				    const u8 *addr, u16 tid, u16 *ssn);
 int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id,
 					u8 tid, int txq_id);
 
@@ -812,14 +806,11 @@ struct iwl_chain_noise_data {
 #define EEPROM_SEM_RETRY_LIMIT 1000	/* number of attempts (not time) */
 
 
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
-
 enum {
 	MEASUREMENT_READY = (1 << 0),
 	MEASUREMENT_ACTIVE = (1 << 1),
 };
 
-#endif
 
 #define IWL_MAX_NUM_QUEUES	20 /* FIXME: do dynamic allocation */
 
@@ -844,7 +835,7 @@ struct iwl_priv {
 
 	struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
 
-#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
+#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
 	/* spectrum measurement report caching */
 	struct iwl4965_spectrum_notification measure_report;
 	u8 measurement_status;
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 4a08a1b5097..37155755efc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -63,7 +63,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 
 #include <net/mac80211.h>
@@ -146,7 +145,7 @@ int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
 {
 	u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
 	if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		return -ENOENT;
 	}
 	return 0;
@@ -227,7 +226,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 
 	ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv);
 	if (ret < 0) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		ret = -ENOENT;
 		goto err;
 	}
@@ -254,7 +253,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		}
 
 		if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
-			IWL_ERROR("Time out reading EEPROM[%d]", addr);
+			IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
 			ret = -ETIMEDOUT;
 			goto done;
 		}
@@ -273,8 +272,7 @@ EXPORT_SYMBOL(iwl_eeprom_init);
 
 void iwl_eeprom_free(struct iwl_priv *priv)
 {
-	if(priv->eeprom)
-		kfree(priv->eeprom);
+	kfree(priv->eeprom);
 	priv->eeprom = NULL;
 }
 EXPORT_SYMBOL(iwl_eeprom_free);
diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h
index 944642450d3..cd11c0ca299 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fh.h
@@ -287,6 +287,7 @@
 
 #define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE	(0x01000000)
 
+#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT	28
 
 /**
  * Transmit DMA Channel Control/Status Registers (TCSR)
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 8fa991b7202..2eb03eea190 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -28,7 +28,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <net/mac80211.h>
 
 #include "iwl-dev.h" /* FIXME: remove */
@@ -228,7 +227,7 @@ cancel:
 		 * TX cmd queue. Otherwise in case the cmd comes
 		 * in later, it will possibly set an invalid
 		 * address (cmd->meta.source). */
-		qcmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx];
+		qcmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx];
 		qcmd->meta.flags &= ~CMD_WANT_SKB;
 	}
 fail:
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 899d7a2567a..4eee1b163cd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -27,7 +27,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -161,12 +160,32 @@ int iwl4965_led_off(struct iwl_priv *priv, int led_id)
 /* Set led register off */
 static int iwl4965_led_off_reg(struct iwl_priv *priv, int led_id)
 {
-	IWL_DEBUG_LED("radio off\n");
+	IWL_DEBUG_LED("LED Reg off\n");
 	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF);
 	return 0;
 }
 
 /*
+ * Set led register in case of disassociation according to rfkill state
+ */
+static int iwl_led_associate(struct iwl_priv *priv, int led_id)
+{
+	IWL_DEBUG_LED("Associated\n");
+	priv->allow_blinking = 1;
+	return iwl4965_led_on_reg(priv, led_id);
+}
+static int iwl_led_disassociate(struct iwl_priv *priv, int led_id)
+{
+	priv->allow_blinking = 0;
+	if (iwl_is_rfkill(priv))
+		iwl4965_led_off_reg(priv, led_id);
+	else
+		iwl4965_led_on_reg(priv, led_id);
+
+	return 0;
+}
+
+/*
  * brightness call back function for Tx/Rx LED
  */
 static int iwl_led_associated(struct iwl_priv *priv, int led_id)
@@ -199,16 +218,10 @@ static void iwl_led_brightness_set(struct led_classdev *led_cdev,
 			led_type_str[led->type], brightness);
 	switch (brightness) {
 	case LED_FULL:
-		if (led->type == IWL_LED_TRG_ASSOC)
-			priv->allow_blinking = 1;
-
 		if (led->led_on)
 			led->led_on(priv, IWL_LED_LINK);
 		break;
 	case LED_OFF:
-		if (led->type == IWL_LED_TRG_ASSOC)
-			priv->allow_blinking = 0;
-
 		if (led->led_off)
 			led->led_off(priv, IWL_LED_LINK);
 		break;
@@ -228,12 +241,12 @@ static void iwl_led_brightness_set(struct led_classdev *led_cdev,
  */
 static int iwl_leds_register_led(struct iwl_priv *priv, struct iwl_led *led,
 				   enum led_type type, u8 set_led,
-				   const char *name, char *trigger)
+				   char *trigger)
 {
 	struct device *device = wiphy_dev(priv->hw->wiphy);
 	int ret;
 
-	led->led_dev.name = name;
+	led->led_dev.name = led->name;
 	led->led_dev.brightness_set = iwl_led_brightness_set;
 	led->led_dev.default_trigger = trigger;
 
@@ -268,7 +281,9 @@ static int iwl_get_blink_rate(struct iwl_priv *priv)
 	if (tpt < 0) /* wrapparound */
 		tpt = -tpt;
 
-	IWL_DEBUG_LED("tpt %lld current_tpt %lld\n", tpt, current_tpt);
+	IWL_DEBUG_LED("tpt %lld current_tpt %llu\n",
+		(long long)tpt,
+		(unsigned long long)current_tpt);
 	priv->led_tpt = current_tpt;
 
 	if (!priv->allow_blinking)
@@ -282,12 +297,6 @@ static int iwl_get_blink_rate(struct iwl_priv *priv)
 	return i;
 }
 
-static inline int is_rf_kill(struct iwl_priv *priv)
-{
-	return test_bit(STATUS_RF_KILL_HW, &priv->status) ||
-		test_bit(STATUS_RF_KILL_SW, &priv->status);
-}
-
 /*
  * this function called from handler. Since setting Led command can
  * happen very frequent we postpone led command to be called from
@@ -301,7 +310,7 @@ void iwl_leds_background(struct iwl_priv *priv)
 		priv->last_blink_time = 0;
 		return;
 	}
-	if (is_rf_kill(priv)) {
+	if (iwl_is_rfkill(priv)) {
 		priv->last_blink_time = 0;
 		return;
 	}
@@ -335,7 +344,6 @@ EXPORT_SYMBOL(iwl_leds_background);
 int iwl_leds_register(struct iwl_priv *priv)
 {
 	char *trigger;
-	char name[32];
 	int ret;
 
 	priv->last_blink_rate = 0;
@@ -344,7 +352,8 @@ int iwl_leds_register(struct iwl_priv *priv)
 	priv->allow_blinking = 0;
 
 	trigger = ieee80211_get_radio_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:radio",
+	snprintf(priv->led[IWL_LED_TRG_RADIO].name,
+		 sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio",
 		 wiphy_name(priv->hw->wiphy));
 
 	priv->led[IWL_LED_TRG_RADIO].led_on = iwl4965_led_on_reg;
@@ -352,31 +361,33 @@ int iwl_leds_register(struct iwl_priv *priv)
 	priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL;
 
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RADIO],
-				   IWL_LED_TRG_RADIO, 1, name, trigger);
+				   IWL_LED_TRG_RADIO, 1, trigger);
 	if (ret)
 		goto exit_fail;
 
 	trigger = ieee80211_get_assoc_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:assoc",
+	snprintf(priv->led[IWL_LED_TRG_ASSOC].name,
+		 sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc",
 		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC],
-				   IWL_LED_TRG_ASSOC, 0, name, trigger);
+				   IWL_LED_TRG_ASSOC, 0, trigger);
 
 	/* for assoc always turn led on */
-	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl4965_led_on_reg;
-	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl4965_led_on_reg;
+	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl_led_associate;
+	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl_led_disassociate;
 	priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL;
 
 	if (ret)
 		goto exit_fail;
 
 	trigger = ieee80211_get_rx_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:RX", wiphy_name(priv->hw->wiphy));
-
+	snprintf(priv->led[IWL_LED_TRG_RX].name,
+		 sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX",
+		 wiphy_name(priv->hw->wiphy));
 
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RX],
-				   IWL_LED_TRG_RX, 0, name, trigger);
+				   IWL_LED_TRG_RX, 0, trigger);
 
 	priv->led[IWL_LED_TRG_RX].led_on = iwl_led_associated;
 	priv->led[IWL_LED_TRG_RX].led_off = iwl_led_associated;
@@ -386,9 +397,12 @@ int iwl_leds_register(struct iwl_priv *priv)
 		goto exit_fail;
 
 	trigger = ieee80211_get_tx_led_name(priv->hw);
-	snprintf(name, sizeof(name), "iwl-%s:TX", wiphy_name(priv->hw->wiphy));
+	snprintf(priv->led[IWL_LED_TRG_TX].name,
+		 sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX",
+		 wiphy_name(priv->hw->wiphy));
+
 	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_TX],
-				   IWL_LED_TRG_TX, 0, name, trigger);
+				   IWL_LED_TRG_TX, 0, trigger);
 
 	priv->led[IWL_LED_TRG_TX].led_on = iwl_led_associated;
 	priv->led[IWL_LED_TRG_TX].led_off = iwl_led_associated;
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h
index 1980ae5a7e8..588c9ad20e8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-led.h
@@ -52,6 +52,7 @@ enum led_type {
 struct iwl_led {
 	struct iwl_priv *priv;
 	struct led_classdev led_dev;
+	char name[32];
 
 	int (*led_on) (struct iwl_priv *priv, int led_id);
 	int (*led_off) (struct iwl_priv *priv, int led_id);
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 2e71803e09b..a099c9e30e5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -29,7 +29,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 
 #include <net/mac80211.h>
@@ -82,7 +81,7 @@
 
 /* default power management (not Tx power) table values */
 /* for tim  0-10 */
-static struct iwl_power_vec_entry range_0[IWL_POWER_AC] = {
+static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
@@ -93,7 +92,7 @@ static struct iwl_power_vec_entry range_0[IWL_POWER_AC] = {
 
 
 /* for tim = 3-10 */
-static struct iwl_power_vec_entry range_1[IWL_POWER_AC] = {
+static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
@@ -103,7 +102,7 @@ static struct iwl_power_vec_entry range_1[IWL_POWER_AC] = {
 };
 
 /* for tim > 11 */
-static struct iwl_power_vec_entry range_2[IWL_POWER_AC] = {
+static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
@@ -112,12 +111,19 @@ static struct iwl_power_vec_entry range_2[IWL_POWER_AC] = {
 	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
 };
 
+/* set card power command */
+static int iwl_set_power(struct iwl_priv *priv, void *cmd)
+{
+	return iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD,
+				      sizeof(struct iwl_powertable_cmd),
+				      cmd, NULL);
+}
 /* decide the right power level according to association status
  * and battery status
  */
 static u16 iwl_get_auto_power_mode(struct iwl_priv *priv)
 {
-	u16 mode = priv->power_data.user_power_setting;
+	u16 mode;
 
 	switch (priv->power_data.user_power_setting) {
 	case IWL_POWER_AUTO:
@@ -129,12 +135,16 @@ static u16 iwl_get_auto_power_mode(struct iwl_priv *priv)
 		else
 			mode = IWL_POWER_ON_AC_DISASSOC;
 		break;
+	/* FIXME: remove battery and ac from here */
 	case IWL_POWER_BATTERY:
 		mode = IWL_POWER_INDEX_3;
 		break;
 	case IWL_POWER_AC:
 		mode = IWL_POWER_MODE_CAM;
 		break;
+	default:
+		mode = priv->power_data.user_power_setting;
+		break;
 	}
 	return mode;
 }
@@ -144,7 +154,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv)
 {
 	int ret = 0, i;
 	struct iwl_power_mgr *pow_data;
-	int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_AC;
+	int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX;
 	u16 pci_pm;
 
 	IWL_DEBUG_POWER("Initialize power \n");
@@ -162,11 +172,11 @@ static int iwl_power_init_handle(struct iwl_priv *priv)
 	if (ret != 0)
 		return 0;
 	else {
-		struct iwl4965_powertable_cmd *cmd;
+		struct iwl_powertable_cmd *cmd;
 
 		IWL_DEBUG_POWER("adjust power command flags\n");
 
-		for (i = 0; i < IWL_POWER_AC; i++) {
+		for (i = 0; i < IWL_POWER_MAX; i++) {
 			cmd = &pow_data->pwr_range_0[i].cmd;
 
 			if (pci_pm & 0x1)
@@ -180,7 +190,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv)
 
 /* adjust power command according to dtim period and power level*/
 static int iwl_update_power_command(struct iwl_priv *priv,
-				    struct iwl4965_powertable_cmd *cmd,
+				    struct iwl_powertable_cmd *cmd,
 				    u16 mode)
 {
 	int ret = 0, i;
@@ -204,7 +214,7 @@ static int iwl_update_power_command(struct iwl_priv *priv,
 		range = &pow_data->pwr_range_2[0];
 
 	period = pow_data->dtim_period;
-	memcpy(cmd, &range[mode].cmd, sizeof(struct iwl4965_powertable_cmd));
+	memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd));
 
 	if (period == 0) {
 		period = 1;
@@ -258,17 +268,18 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh)
 	* else user level */
 
 	switch (setting->system_power_setting) {
-	case IWL_POWER_AUTO:
+	case IWL_POWER_SYS_AUTO:
 		final_mode = iwl_get_auto_power_mode(priv);
 		break;
-	case IWL_POWER_BATTERY:
+	case IWL_POWER_SYS_BATTERY:
 		final_mode = IWL_POWER_INDEX_3;
 		break;
-	case IWL_POWER_AC:
+	case IWL_POWER_SYS_AC:
 		final_mode = IWL_POWER_MODE_CAM;
 		break;
 	default:
-		final_mode = setting->system_power_setting;
+		final_mode = IWL_POWER_INDEX_3;
+		WARN_ON(1);
 	}
 
 	if (setting->critical_power_setting > final_mode)
@@ -280,7 +291,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh)
 
 	if (!iwl_is_rfkill(priv) && !setting->power_disabled &&
 	    ((setting->power_mode != final_mode) || refresh)) {
-		struct iwl4965_powertable_cmd cmd;
+		struct iwl_powertable_cmd cmd;
 
 		if (final_mode != IWL_POWER_MODE_CAM)
 			set_bit(STATUS_POWER_PMI, &priv->status);
@@ -291,8 +302,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh)
 		if (final_mode == IWL_POWER_INDEX_5)
 			cmd.flags |= IWL_POWER_FAST_PD;
 
-		if (priv->cfg->ops->lib->set_power)
-			ret = priv->cfg->ops->lib->set_power(priv, &cmd);
+		ret = iwl_set_power(priv, &cmd);
 
 		if (final_mode == IWL_POWER_MODE_CAM)
 			clear_bit(STATUS_POWER_PMI, &priv->status);
@@ -388,7 +398,7 @@ void iwl_power_initialize(struct iwl_priv *priv)
 	iwl_power_init_handle(priv);
 	priv->power_data.user_power_setting = IWL_POWER_AUTO;
 	priv->power_data.power_disabled = 0;
-	priv->power_data.system_power_setting = IWL_POWER_AUTO;
+	priv->power_data.system_power_setting = IWL_POWER_SYS_AUTO;
 	priv->power_data.is_battery_active = 0;
 	priv->power_data.power_disabled = 0;
 	priv->power_data.critical_power_setting = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index b066724a1c2..abcbbf96a84 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -33,12 +33,25 @@
 
 struct iwl_priv;
 
-#define IWL_POWER_MODE_CAM	0x00    /* Continuously Aware Mode, always on */
-#define IWL_POWER_INDEX_3	0x03
-#define IWL_POWER_INDEX_5	0x05
-#define IWL_POWER_AC		0x06
-#define IWL_POWER_BATTERY	0x07
-#define IWL_POWER_AUTO		0x08
+enum {
+	IWL_POWER_MODE_CAM, /* Continuously Aware Mode, always on */
+	IWL_POWER_INDEX_1,
+	IWL_POWER_INDEX_2,
+	IWL_POWER_INDEX_3,
+	IWL_POWER_INDEX_4,
+	IWL_POWER_INDEX_5,
+	IWL_POWER_AUTO,
+	IWL_POWER_MAX = IWL_POWER_AUTO,
+	IWL_POWER_AC,
+	IWL_POWER_BATTERY,
+};
+
+enum {
+	IWL_POWER_SYS_AUTO,
+	IWL_POWER_SYS_AC,
+	IWL_POWER_SYS_BATTERY,
+};
+
 #define IWL_POWER_LIMIT		0x08
 #define IWL_POWER_MASK		0x0F
 #define IWL_POWER_ENABLED	0x10
@@ -46,15 +59,15 @@ struct iwl_priv;
 /* Power management (not Tx power) structures */
 
 struct iwl_power_vec_entry {
-	struct iwl4965_powertable_cmd cmd;
+	struct iwl_powertable_cmd cmd;
 	u8 no_dtim;
 };
 
 struct iwl_power_mgr {
 	spinlock_t lock;
-	struct iwl_power_vec_entry pwr_range_0[IWL_POWER_AC];
-	struct iwl_power_vec_entry pwr_range_1[IWL_POWER_AC];
-	struct iwl_power_vec_entry pwr_range_2[IWL_POWER_AC];
+	struct iwl_power_vec_entry pwr_range_0[IWL_POWER_MAX];
+	struct iwl_power_vec_entry pwr_range_1[IWL_POWER_MAX];
+	struct iwl_power_vec_entry pwr_range_2[IWL_POWER_MAX];
 	u32 dtim_period;
 	/* final power level that used to calculate final power command */
 	u8 power_mode;
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 70d9c7568b9..ee5afd48d3a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -84,14 +84,16 @@
 #define APMG_CLK_VAL_DMA_CLK_RQT	(0x00000200)
 #define APMG_CLK_VAL_BSM_CLK_RQT	(0x00000800)
 
-#define APMG_PS_CTRL_VAL_RESET_REQ	(0x04000000)
 
-#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS	(0x00000800)
+#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS	(0x00400000)
+#define APMG_PS_CTRL_VAL_RESET_REQ		(0x04000000)
+#define APMG_PS_CTRL_MSK_PWR_SRC		(0x03000000)
+#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN		(0x00000000)
+#define APMG_PS_CTRL_VAL_PWR_SRC_MAX		(0x01000000) /* 3945 only */
+#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX		(0x02000000)
 
-#define APMG_PS_CTRL_MSK_PWR_SRC              (0x03000000)
-#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN        (0x00000000)
-#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX         (0x01000000)
 
+#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS		(0x00000800)
 
 /**
  * BSM (Bootstrap State Machine)
diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
index e5e5846e9f2..5d642298f04 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
@@ -27,7 +27,6 @@
  *****************************************************************************/
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 
 #include <net/mac80211.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index e2d9afba38a..e81bfc42a7c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -791,7 +791,7 @@ static inline void iwl_dbg_report_frame(struct iwl_priv *priv,
 
 static void iwl_add_radiotap(struct iwl_priv *priv,
 				 struct sk_buff *skb,
-				 struct iwl4965_rx_phy_res *rx_start,
+				 struct iwl_rx_phy_res *rx_start,
 				 struct ieee80211_rx_status *stats,
 				 u32 ampdu_status)
 {
@@ -1010,8 +1010,8 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
 				       struct ieee80211_rx_status *stats)
 {
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	struct iwl4965_rx_phy_res *rx_start = (include_phy) ?
-	    (struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : NULL;
+	struct iwl_rx_phy_res *rx_start = (include_phy) ?
+	    (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : NULL;
 	struct ieee80211_hdr *hdr;
 	u16 len;
 	__le32 *rx_end;
@@ -1020,7 +1020,7 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
 	u32 ampdu_status_legacy;
 
 	if (!include_phy && priv->last_phy_res[0])
-		rx_start = (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1];
+		rx_start = (struct iwl_rx_phy_res *)&priv->last_phy_res[1];
 
 	if (!rx_start) {
 		IWL_ERROR("MPDU frame without a PHY data\n");
@@ -1032,8 +1032,8 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
 
 		len = le16_to_cpu(rx_start->byte_count);
 
-		rx_end = (__le32 *) ((u8 *) &pkt->u.raw[0] +
-				  sizeof(struct iwl4965_rx_phy_res) +
+		rx_end = (__le32 *)((u8 *) &pkt->u.raw[0] +
+				  sizeof(struct iwl_rx_phy_res) +
 				  rx_start->cfg_phy_cnt + len);
 
 	} else {
@@ -1084,40 +1084,13 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
 }
 
 /* Calc max signal level (dBm) among 3 possible receivers */
-static int iwl_calc_rssi(struct iwl_priv *priv,
-			     struct iwl4965_rx_phy_res *rx_resp)
+static inline int iwl_calc_rssi(struct iwl_priv *priv,
+				struct iwl_rx_phy_res *rx_resp)
 {
-	/* data from PHY/DSP regarding signal strength, etc.,
-	 *   contents are always there, not configurable by host.  */
-	struct iwl4965_rx_non_cfg_phy *ncphy =
-	    (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy;
-	u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL_AGC_DB_MASK)
-			>> IWL_AGC_DB_POS;
-
-	u32 valid_antennae =
-	    (le16_to_cpu(rx_resp->phy_flags) & RX_PHY_FLAGS_ANTENNAE_MASK)
-			>> RX_PHY_FLAGS_ANTENNAE_OFFSET;
-	u8 max_rssi = 0;
-	u32 i;
-
-	/* Find max rssi among 3 possible receivers.
-	 * These values are measured by the digital signal processor (DSP).
-	 * They should stay fairly constant even as the signal strength varies,
-	 *   if the radio's automatic gain control (AGC) is working right.
-	 * AGC value (see below) will provide the "interesting" info. */
-	for (i = 0; i < 3; i++)
-		if (valid_antennae & (1 << i))
-			max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
-
-	IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
-		ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
-		max_rssi, agc);
-
-	/* dBm = max_rssi dB - agc dB - constant.
-	 * Higher AGC (higher radio gain) means lower signal. */
-	return max_rssi - agc - IWL_RSSI_OFFSET;
+	return priv->cfg->ops->utils->calc_rssi(priv, rx_resp);
 }
 
+
 static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id)
 {
 	unsigned long flags;
@@ -1180,9 +1153,9 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 	 *   this rx packet for legacy frames,
 	 *   or phy data cached from REPLY_RX_PHY_CMD for HT frames. */
 	int include_phy = (pkt->hdr.cmd == REPLY_RX);
-	struct iwl4965_rx_phy_res *rx_start = (include_phy) ?
-		(struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) :
-		(struct iwl4965_rx_phy_res *)&priv->last_phy_res[1];
+	struct iwl_rx_phy_res *rx_start = (include_phy) ?
+		(struct iwl_rx_phy_res *)&(pkt->u.raw[0]) :
+		(struct iwl_rx_phy_res *)&priv->last_phy_res[1];
 	__le32 *rx_end;
 	unsigned int len = 0;
 	u16 fc;
@@ -1200,7 +1173,10 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 
 	rx_status.antenna = 0;
 	rx_status.flag = 0;
-	rx_status.flag |= RX_FLAG_TSFT;
+
+	/* TSF isn't reliable. In order to allow smooth user experience,
+	 * this W/A doesn't propagate it to the mac80211 */
+	/*rx_status.flag |= RX_FLAG_TSFT;*/
 
 	if ((unlikely(rx_start->cfg_phy_cnt > 20))) {
 		IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n",
@@ -1210,7 +1186,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 
 	if (!include_phy) {
 		if (priv->last_phy_res[0])
-			rx_start = (struct iwl4965_rx_phy_res *)
+			rx_start = (struct iwl_rx_phy_res *)
 				&priv->last_phy_res[1];
 		else
 			rx_start = NULL;
@@ -1227,7 +1203,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 
 		len = le16_to_cpu(rx_start->byte_count);
 		rx_end = (__le32 *)(pkt->u.raw + rx_start->cfg_phy_cnt +
-				  sizeof(struct iwl4965_rx_phy_res) + len);
+				  sizeof(struct iwl_rx_phy_res) + len);
 	} else {
 		struct iwl4965_rx_mpdu_res_start *amsdu =
 			(struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
@@ -1316,6 +1292,6 @@ void iwl_rx_reply_rx_phy(struct iwl_priv *priv,
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 	priv->last_phy_res[0] = 1;
 	memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
-	       sizeof(struct iwl4965_rx_phy_res));
+	       sizeof(struct iwl_rx_phy_res));
 }
 EXPORT_SYMBOL(iwl_rx_reply_rx_phy);
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index efc750d2fc5..6c8ac3a87d5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -202,6 +202,7 @@ static int iwl_send_scan_abort(struct iwl_priv *priv)
 		clear_bit(STATUS_SCAN_HW, &priv->status);
 	}
 
+	priv->alloc_rxb_skb--;
 	dev_kfree_skb_any(cmd.meta.u.skb);
 
 	return ret;
@@ -270,6 +271,7 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
 static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 				       struct iwl_rx_mem_buffer *rxb)
 {
+#ifdef CONFIG_IWLWIFI_DEBUG
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
 
@@ -277,6 +279,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 		       scan_notif->scanned_channels,
 		       scan_notif->tsf_low,
 		       scan_notif->tsf_high, scan_notif->status);
+#endif
 
 	/* The HW is no longer scanning */
 	clear_bit(STATUS_SCAN_HW, &priv->status);
@@ -418,7 +421,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
 		else
 			scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
 
-		if ((scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) && n_probes)
+		if (n_probes)
 			scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
 
 		scan_ch->active_dwell = cpu_to_le16(active_dwell);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 6d1467d0bd9..6283a3a707f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -207,7 +207,7 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
 	case WLAN_HT_CAP_MIMO_PS_DISABLED:
 		break;
 	default:
-		IWL_WARNING("Invalid MIMO PS mode %d", mimo_ps_mode);
+		IWL_WARNING("Invalid MIMO PS mode %d\n", mimo_ps_mode);
 		break;
 	}
 
@@ -823,7 +823,7 @@ int iwl_send_lq_cmd(struct iwl_priv *priv,
 	if (lq->sta_id == 0xFF)
 		lq->sta_id = IWL_AP_ID;
 
-	iwl_dump_lq_cmd(priv,lq);
+	iwl_dump_lq_cmd(priv, lq);
 
 	if (iwl_is_associated(priv) && priv->assoc_station_added)
 		return  iwl_send_cmd(priv, &cmd);
@@ -839,7 +839,7 @@ EXPORT_SYMBOL(iwl_send_lq_cmd);
  * for automatic fallback during transmission.
  *
  * NOTE: This sets up a default set of values.  These will be replaced later
- *       if the driver's iwl-4965-rs rate scaling algorithm is used, instead of
+ *       if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
  *       rc80211_simple.
  *
  * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
@@ -969,7 +969,7 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
 		return priv->hw_params.bcast_sta_id;
 
 	default:
-		IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
+		IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
 		return priv->hw_params.bcast_sta_id;
 	}
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 9b50b1052b0..78b1a7a4ca4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -208,11 +208,12 @@ EXPORT_SYMBOL(iwl_txq_update_write_ptr);
  * Free all buffers.
  * 0-fill, but do not free "txq" descriptor structure.
  */
-static void iwl_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq)
+static void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id)
 {
+	struct iwl_tx_queue *txq = &priv->txq[txq_id];
 	struct iwl_queue *q = &txq->q;
 	struct pci_dev *dev = priv->pci_dev;
-	int len;
+	int i, slots_num, len;
 
 	if (q->n_bd == 0)
 		return;
@@ -227,7 +228,12 @@ static void iwl_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 		len += IWL_MAX_SCAN_SIZE;
 
 	/* De-alloc array of command/tx buffers */
-	pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
+	slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
+			TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
+	for (i = 0; i < slots_num; i++)
+		kfree(txq->cmd[i]);
+	if (txq_id == IWL_CMD_QUEUE_NUM)
+		kfree(txq->cmd[slots_num]);
 
 	/* De-alloc circular buffer of TFDs */
 	if (txq->q.n_bd)
@@ -396,13 +402,11 @@ static int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 /**
  * iwl_tx_queue_init - Allocate and initialize one tx/cmd queue
  */
-static int iwl_tx_queue_init(struct iwl_priv *priv,
-			     struct iwl_tx_queue *txq,
+static int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 			     int slots_num, u32 txq_id)
 {
-	struct pci_dev *dev = priv->pci_dev;
-	int len;
-	int rc = 0;
+	int i, len;
+	int ret;
 
 	/*
 	 * Alloc buffer array for commands (Tx or other types of commands).
@@ -412,20 +416,25 @@ static int iwl_tx_queue_init(struct iwl_priv *priv,
 	 * For normal Tx queues (all other queues), no super-size command
 	 * space is needed.
 	 */
-	len = sizeof(struct iwl_cmd) * slots_num;
-	if (txq_id == IWL_CMD_QUEUE_NUM)
-		len +=  IWL_MAX_SCAN_SIZE;
-	txq->cmd = pci_alloc_consistent(dev, len, &txq->dma_addr_cmd);
-	if (!txq->cmd)
-		return -ENOMEM;
+	len = sizeof(struct iwl_cmd);
+	for (i = 0; i <= slots_num; i++) {
+		if (i == slots_num) {
+			if (txq_id == IWL_CMD_QUEUE_NUM)
+				len += IWL_MAX_SCAN_SIZE;
+			else
+				continue;
+		}
+
+		txq->cmd[i] = kmalloc(len, GFP_KERNEL);
+		if (!txq->cmd[i])
+			goto err;
+	}
 
 	/* Alloc driver data array and TFD circular buffer */
-	rc = iwl_tx_queue_alloc(priv, txq, txq_id);
-	if (rc) {
-		pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
+	ret = iwl_tx_queue_alloc(priv, txq, txq_id);
+	if (ret)
+		goto err;
 
-		return -ENOMEM;
-	}
 	txq->need_update = 0;
 
 	/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
@@ -439,6 +448,17 @@ static int iwl_tx_queue_init(struct iwl_priv *priv,
 	iwl_hw_tx_queue_init(priv, txq);
 
 	return 0;
+err:
+	for (i = 0; i < slots_num; i++) {
+		kfree(txq->cmd[i]);
+		txq->cmd[i] = NULL;
+	}
+
+	if (txq_id == IWL_CMD_QUEUE_NUM) {
+		kfree(txq->cmd[slots_num]);
+		txq->cmd[slots_num] = NULL;
+	}
+	return -ENOMEM;
 }
 /**
  * iwl_hw_txq_ctx_free - Free TXQ Context
@@ -451,7 +471,7 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv)
 
 	/* Tx queues */
 	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
-		iwl_tx_queue_free(priv, &priv->txq[txq_id]);
+		iwl_tx_queue_free(priv, txq_id);
 
 	/* Keep-warm buffer */
 	iwl_kw_free(priv);
@@ -480,7 +500,7 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv)
 	/* Alloc keep-warm buffer */
 	ret = iwl_kw_alloc(priv);
 	if (ret) {
-		IWL_ERROR("Keep Warm allocation failed");
+		IWL_ERROR("Keep Warm allocation failed\n");
 		goto error_kw;
 	}
 	spin_lock_irqsave(&priv->lock, flags);
@@ -751,20 +771,19 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct iwl_tfd_frame *tfd;
-	u32 *control_flags;
-	int txq_id = skb_get_queue_mapping(skb);
-	struct iwl_tx_queue *txq = NULL;
-	struct iwl_queue *q = NULL;
+	struct iwl_tx_queue *txq;
+	struct iwl_queue *q;
+	struct iwl_cmd *out_cmd;
+	struct iwl_tx_cmd *tx_cmd;
+	int swq_id, txq_id;
 	dma_addr_t phys_addr;
 	dma_addr_t txcmd_phys;
 	dma_addr_t scratch_phys;
-	struct iwl_cmd *out_cmd = NULL;
-	struct iwl_tx_cmd *tx_cmd;
 	u16 len, idx, len_org;
 	u16 seq_number = 0;
-	u8 id, hdr_len, unicast;
-	u8 sta_id;
 	__le16 fc;
+	u8 hdr_len, unicast;
+	u8 sta_id;
 	u8 wait_write_ptr = 0;
 	u8 tid = 0;
 	u8 *qc = NULL;
@@ -789,7 +808,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	}
 
 	unicast = !is_multicast_ether_addr(hdr->addr1);
-	id = 0;
 
 	fc = hdr->frame_control;
 
@@ -827,14 +845,16 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	IWL_DEBUG_TX("station Id %d\n", sta_id);
 
+	swq_id = skb_get_queue_mapping(skb);
+	txq_id = swq_id;
 	if (ieee80211_is_data_qos(fc)) {
 		qc = ieee80211_get_qos_ctl(hdr);
 		tid = qc[0] & 0xf;
-		seq_number = priv->stations[sta_id].tid[tid].seq_number &
-				IEEE80211_SCTL_SEQ;
-		hdr->seq_ctrl = cpu_to_le16(seq_number) |
-			(hdr->seq_ctrl &
-				__constant_cpu_to_le16(IEEE80211_SCTL_FRAG));
+		seq_number = priv->stations[sta_id].tid[tid].seq_number;
+		seq_number &= IEEE80211_SCTL_SEQ;
+		hdr->seq_ctrl = hdr->seq_ctrl &
+				__constant_cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(seq_number);
 		seq_number += 0x10;
 		/* aggregation is on for this <sta,tid> */
 		if (info->flags & IEEE80211_TX_CTL_AMPDU)
@@ -851,7 +871,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	/* Set up first empty TFD within this queue's circular TFD buffer */
 	tfd = &txq->bd[q->write_ptr];
 	memset(tfd, 0, sizeof(*tfd));
-	control_flags = (u32 *) tfd;
 	idx = get_cmd_index(q, q->write_ptr, 0);
 
 	/* Set up driver data for this TFD */
@@ -859,7 +878,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	txq->txb[q->write_ptr].skb[0] = skb;
 
 	/* Set up first empty entry in queue's array of Tx/cmd buffers */
-	out_cmd = &txq->cmd[idx];
+	out_cmd = txq->cmd[idx];
 	tx_cmd = &out_cmd->cmd.tx;
 	memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
 	memset(tx_cmd, 0, sizeof(struct iwl_tx_cmd));
@@ -899,14 +918,15 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* Physical address of this Tx command's header (not MAC header!),
 	 * within command buffer array. */
-	txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl_cmd) * idx +
-		     offsetof(struct iwl_cmd, hdr);
+	txcmd_phys = pci_map_single(priv->pci_dev, out_cmd,
+				sizeof(struct iwl_cmd), PCI_DMA_TODEVICE);
+	txcmd_phys += offsetof(struct iwl_cmd, hdr);
 
 	/* Add buffer containing Tx command and MAC(!) header to TFD's
 	 * first entry */
 	iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
 
-	if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+	if (info->control.hw_key)
 		iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
@@ -962,16 +982,15 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (ret)
 		return ret;
 
-	if ((iwl_queue_space(q) < q->high_mark)
-	    && priv->mac80211_registered) {
+	if ((iwl_queue_space(q) < q->high_mark) && priv->mac80211_registered) {
 		if (wait_write_ptr) {
 			spin_lock_irqsave(&priv->lock, flags);
 			txq->need_update = 1;
 			iwl_txq_update_write_ptr(priv, txq);
 			spin_unlock_irqrestore(&priv->lock, flags);
+		} else {
+			ieee80211_stop_queue(priv->hw, swq_id);
 		}
-
-		ieee80211_stop_queue(priv->hw, skb_get_queue_mapping(skb));
 	}
 
 	return 0;
@@ -999,13 +1018,12 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
 	struct iwl_queue *q = &txq->q;
 	struct iwl_tfd_frame *tfd;
-	u32 *control_flags;
 	struct iwl_cmd *out_cmd;
-	u32 idx;
-	u16 fix_size;
 	dma_addr_t phys_addr;
-	int ret;
 	unsigned long flags;
+	int len, ret;
+	u32 idx;
+	u16 fix_size;
 
 	cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len);
 	fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
@@ -1031,10 +1049,9 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	tfd = &txq->bd[q->write_ptr];
 	memset(tfd, 0, sizeof(*tfd));
 
-	control_flags = (u32 *) tfd;
 
 	idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE);
-	out_cmd = &txq->cmd[idx];
+	out_cmd = txq->cmd[idx];
 
 	out_cmd->hdr.cmd = cmd->id;
 	memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta));
@@ -1048,9 +1065,11 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 			INDEX_TO_SEQ(q->write_ptr));
 	if (out_cmd->meta.flags & CMD_SIZE_HUGE)
 		out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME);
-
-	phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx +
-			offsetof(struct iwl_cmd, hdr);
+	len = (idx == TFD_CMD_SLOTS) ?
+			IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
+	phys_addr = pci_map_single(priv->pci_dev, out_cmd, len,
+						PCI_DMA_TODEVICE);
+	phys_addr += offsetof(struct iwl_cmd, hdr);
 	iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size);
 
 	IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
@@ -1115,6 +1134,9 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
 {
 	struct iwl_tx_queue *txq = &priv->txq[txq_id];
 	struct iwl_queue *q = &txq->q;
+	struct iwl_tfd_frame *bd = &txq->bd[index];
+	dma_addr_t dma_addr;
+	int is_odd, buf_len;
 	int nfreed = 0;
 
 	if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) {
@@ -1132,6 +1154,19 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
 					q->write_ptr, q->read_ptr);
 			queue_work(priv->workqueue, &priv->restart);
 		}
+		is_odd = (index/2) & 0x1;
+		if (is_odd) {
+			dma_addr = IWL_GET_BITS(bd->pa[index], tb2_addr_lo16) |
+					(IWL_GET_BITS(bd->pa[index],
+							tb2_addr_hi20) << 16);
+			buf_len = IWL_GET_BITS(bd->pa[index], tb2_len);
+		} else {
+			dma_addr = le32_to_cpu(bd->pa[index].tb1_addr);
+			buf_len = IWL_GET_BITS(bd->pa[index], tb1_len);
+		}
+
+		pci_unmap_single(priv->pci_dev, dma_addr, buf_len,
+				 PCI_DMA_TODEVICE);
 		nfreed++;
 	}
 }
@@ -1163,7 +1198,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 	BUG_ON(txq_id != IWL_CMD_QUEUE_NUM);
 
 	cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge);
-	cmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
+	cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
 
 	/* Input error checking is done when commands are added to queue. */
 	if (cmd->meta.flags & CMD_WANT_SKB) {
@@ -1391,7 +1426,7 @@ static int iwl_tx_status_reply_compressed_ba(struct iwl_priv *priv,
 	/* For each frame attempted in aggregation,
 	 * update driver's record of tx frame's status. */
 	for (i = 0; i < agg->frame_count ; i++) {
-		ack = bitmap & (1 << i);
+		ack = bitmap & (1ULL << i);
 		successes += !!ack;
 		IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n",
 			ack? "ACK":"NACK", i, (agg->start_idx + i) & 0xff,
@@ -1435,7 +1470,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 	u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
 
 	if (scd_flow >= priv->hw_params.max_txq_num) {
-		IWL_ERROR("BUG_ON scd_flow is bigger than number of queues");
+		IWL_ERROR("BUG_ON scd_flow is bigger than number of queues\n");
 		return;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4a22d3fba75..b775d5bab66 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -29,7 +29,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -275,10 +274,8 @@ static int iwl3945_tx_queue_alloc(struct iwl3945_priv *priv,
 	return 0;
 
  error:
-	if (txq->txb) {
-		kfree(txq->txb);
-		txq->txb = NULL;
-	}
+	kfree(txq->txb);
+	txq->txb = NULL;
 
 	return -ENOMEM;
 }
@@ -365,10 +362,8 @@ void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *t
 				    txq->q.n_bd, txq->bd, txq->q.dma_addr);
 
 	/* De-alloc array of per-TFD driver data */
-	if (txq->txb) {
-		kfree(txq->txb);
-		txq->txb = NULL;
-	}
+	kfree(txq->txb);
+	txq->txb = NULL;
 
 	/* 0-fill queue descriptor structure */
 	memset(txq, 0, sizeof(*txq));
@@ -1562,7 +1557,7 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv)
 	BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE);
 
 	if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		return -ENOENT;
 	}
 
@@ -1587,7 +1582,7 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv)
 		}
 
 		if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
-			IWL_ERROR("Time out reading EEPROM[%d]", addr);
+			IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
 			return -ETIMEDOUT;
 		}
 		e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
@@ -2511,7 +2506,7 @@ static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *h
 		return priv->hw_setting.bcast_sta_id;
 
 	default:
-		IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
+		IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
 		return priv->hw_setting.bcast_sta_id;
 	}
 }
@@ -2667,7 +2662,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb)
 	 * first entry */
 	iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
 
-	if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+	if (info->control.hw_key)
 		iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0);
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
@@ -2703,9 +2698,8 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb)
 
 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
 		txq->need_update = 1;
-		if (qc) {
+		if (qc)
 			priv->stations[sta_id].tid[tid].seq_number = seq_number;
-		}
 	} else {
 		wait_write_ptr = 1;
 		txq->need_update = 0;
@@ -3813,7 +3807,7 @@ int iwl3945_calc_db_from_ratio(int sig_ratio)
 	/* 100:1 or higher, divide by 10 and use table,
 	 *   add 20 dB to make up for divide by 10 */
 	if (sig_ratio >= 100)
-		return (20 + (int)ratio2dB[sig_ratio/10]);
+		return 20 + (int)ratio2dB[sig_ratio/10];
 
 	/* We shouldn't see this */
 	if (sig_ratio < 1)
@@ -5088,7 +5082,7 @@ static void iwl3945_dealloc_ucode_pci(struct iwl3945_priv *priv)
  * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
  *     looking at all data.
  */
-static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 * image, u32 len)
+static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 *image, u32 len)
 {
 	u32 val;
 	u32 save_len = len;
@@ -5237,7 +5231,7 @@ static int iwl3945_verify_bsm(struct iwl3945_priv *priv)
 	val = iwl3945_read_prph(priv, BSM_WR_DWCOUNT_REG);
 	for (reg = BSM_SRAM_LOWER_BOUND;
 	     reg < BSM_SRAM_LOWER_BOUND + len;
-	     reg += sizeof(u32), image ++) {
+	     reg += sizeof(u32), image++) {
 		val = iwl3945_read_prph(priv, reg);
 		if (val != le32_to_cpu(*image)) {
 			IWL_ERROR("BSM uCode verification failed at "
@@ -6336,7 +6330,7 @@ static void iwl3945_bg_post_associate(struct work_struct *data)
 	DECLARE_MAC_BUF(mac);
 
 	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
-		IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__);
+		IWL_ERROR("%s Should not be called in AP mode\n", __func__);
 		return;
 	}
 
@@ -6417,7 +6411,7 @@ static void iwl3945_bg_post_associate(struct work_struct *data)
 
 	default:
 		 IWL_ERROR("%s Should not be called in %d mode\n",
-			   __FUNCTION__, priv->iw_mode);
+			   __func__, priv->iw_mode);
 		break;
 	}
 
@@ -6594,12 +6588,6 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 
 	IWL_DEBUG_MAC80211("enter\n");
 
-	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
-		IWL_DEBUG_MAC80211("leave - monitor\n");
-		dev_kfree_skb_any(skb);
-		return 0;
-	}
-
 	IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
 		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
 
@@ -7456,7 +7444,7 @@ static ssize_t show_measurement(struct device *d,
 	struct iwl3945_priv *priv = dev_get_drvdata(d);
 	struct iwl3945_spectrum_notification measure_report;
 	u32 size = sizeof(measure_report), len = 0, ofs = 0;
-	u8 *data = (u8 *) & measure_report;
+	u8 *data = (u8 *)&measure_report;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -7627,7 +7615,7 @@ static ssize_t show_power_level(struct device *d,
 	else
 		p += sprintf(p, " \n");
 
-	return (p - buf + 1);
+	return p - buf + 1;
 
 }
 
@@ -7649,7 +7637,7 @@ static ssize_t show_statistics(struct device *d,
 	struct iwl3945_priv *priv = dev_get_drvdata(d);
 	u32 size = sizeof(struct iwl3945_notif_statistics);
 	u32 len = 0, ofs = 0;
-	u8 *data = (u8 *) & priv->statistics;
+	u8 *data = (u8 *)&priv->statistics;
 	int rc = 0;
 
 	if (!iwl3945_is_alive(priv))
@@ -7899,8 +7887,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	priv->ibss_beacon = NULL;
 
 	/* Tell mac80211 our characteristics */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_SIGNAL_DBM |
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 
 	/* 4 EDCA QOS priorities */
@@ -8004,16 +7991,16 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	/* nic init */
 	iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-                    CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
-
-        iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-        err = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
-                          CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
-                          CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-        if (err < 0) {
-                IWL_DEBUG_INFO("Failed to init the card\n");
+			CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+
+	iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+	err = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
+			       CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+			       CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+	if (err < 0) {
+		IWL_DEBUG_INFO("Failed to init the card\n");
 		goto out_remove_sysfs;
-        }
+	}
 	/* Read the EEPROM */
 	err = iwl3945_eeprom_init(priv);
 	if (err) {
@@ -8115,9 +8102,8 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 	iwl3945_unset_hw_setting(priv);
 	iwl3945_clear_stations_table(priv);
 
-	if (priv->mac80211_registered) {
+	if (priv->mac80211_registered)
 		ieee80211_unregister_hw(priv->hw);
-	}
 
 	/*netif_stop_queue(dev); */
 	flush_workqueue(priv->workqueue);
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 04d7a251e3f..8941919001b 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -595,7 +595,7 @@ static int if_cs_prog_helper(struct if_cs_card *card)
 		if (ret < 0) {
 			lbs_pr_err("can't download helper at 0x%x, ret %d\n",
 				sent, ret);
-			goto done;
+			goto err_release;
 		}
 
 		if (count == 0)
@@ -604,9 +604,8 @@ static int if_cs_prog_helper(struct if_cs_card *card)
 		sent += count;
 	}
 
+err_release:
 	release_firmware(fw);
-	ret = 0;
-
 done:
 	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
 	return ret;
@@ -676,14 +675,8 @@ static int if_cs_prog_real(struct if_cs_card *card)
 	}
 
 	ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
-	if (ret < 0) {
+	if (ret < 0)
 		lbs_pr_err("firmware download failed\n");
-		goto err_release;
-	}
-
-	ret = 0;
-	goto done;
-
 
 err_release:
 	release_firmware(fw);
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 14d5d61cec4..bd32ac0b4e0 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -297,9 +297,7 @@ static ssize_t lbs_rtap_set(struct device *dev,
 			lbs_add_rtap(priv);
 		}
 		priv->monitormode = monitor_mode;
-	}
-
-	else {
+	} else {
 		if (!priv->monitormode)
 			return strlen(buf);
 		priv->monitormode = 0;
@@ -1242,8 +1240,6 @@ int lbs_start_card(struct lbs_private *priv)
 		lbs_pr_err("cannot register ethX device\n");
 		goto done;
 	}
-	if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
-		lbs_pr_err("cannot register lbs_rtap attribute\n");
 
 	lbs_update_channel(priv);
 
@@ -1275,6 +1271,13 @@ int lbs_start_card(struct lbs_private *priv)
 
 			if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
 				lbs_pr_err("cannot register lbs_mesh attribute\n");
+
+			/* While rtap isn't related to mesh, only mesh-enabled
+			 * firmware implements the rtap functionality via
+			 * CMD_802_11_MONITOR_MODE.
+			 */
+			if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
+				lbs_pr_err("cannot register lbs_rtap attribute\n");
 		}
 	}
 
@@ -1306,9 +1309,9 @@ void lbs_stop_card(struct lbs_private *priv)
 	netif_carrier_off(priv->dev);
 
 	lbs_debugfs_remove_one(priv);
-	device_remove_file(&dev->dev, &dev_attr_lbs_rtap);
 	if (priv->mesh_tlv) {
 		device_remove_file(&dev->dev, &dev_attr_lbs_mesh);
+		device_remove_file(&dev->dev, &dev_attr_lbs_rtap);
 	}
 
 	/* Flush pending command nodes */
diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c
index 6d0ff8decaf..3309a9c3cfe 100644
--- a/drivers/net/wireless/libertas/persistcfg.c
+++ b/drivers/net/wireless/libertas/persistcfg.c
@@ -48,7 +48,7 @@ static ssize_t bootflag_get(struct device *dev,
 	if (ret)
 		return ret;
 
-	return snprintf(buf, 12, "0x%x\n", le32_to_cpu(defs.bootflag));
+	return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
 }
 
 /**
@@ -63,8 +63,8 @@ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 1))
 		return -EINVAL;
 
 	*((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
@@ -91,7 +91,7 @@ static ssize_t boottime_get(struct device *dev,
 	if (ret)
 		return ret;
 
-	return snprintf(buf, 12, "0x%x\n", defs.boottime);
+	return snprintf(buf, 12, "%d\n", defs.boottime);
 }
 
 /**
@@ -106,8 +106,8 @@ static ssize_t boottime_set(struct device *dev,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* A too small boot time will result in the device booting into
@@ -143,7 +143,7 @@ static ssize_t channel_get(struct device *dev,
 	if (ret)
 		return ret;
 
-	return snprintf(buf, 12, "0x%x\n", le16_to_cpu(defs.channel));
+	return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel));
 }
 
 /**
@@ -154,11 +154,11 @@ static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
 {
 	struct lbs_private *priv = to_net_dev(dev)->priv;
 	struct cmd_ds_mesh_config cmd;
-	uint16_t datum;
+	uint32_t datum;
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%hx", &datum);
+	ret = sscanf(buf, "%d", &datum);
 	if (ret != 1 || datum < 1 || datum > 11)
 		return -EINVAL;
 
@@ -274,8 +274,8 @@ static ssize_t protocol_id_set(struct device *dev,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* fetch all other Information Element parameters */
@@ -328,8 +328,8 @@ static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* fetch all other Information Element parameters */
@@ -382,8 +382,8 @@ static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* fetch all other Information Element parameters */
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 5816230d58f..248d31a7aa3 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -500,7 +500,7 @@ failed_hw:
 	device_unregister(data->dev);
 failed_drvdata:
 	ieee80211_free_hw(hw);
-	hwsim_radios[i] = 0;
+	hwsim_radios[i] = NULL;
 failed:
 	mac80211_hwsim_free();
 	return err;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index b047306bf38..36c004e1560 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -1970,6 +1970,9 @@ __orinoco_set_multicast_list(struct net_device *dev)
 			priv->promiscuous = promisc;
 	}
 
+	/* If we're not in promiscuous mode, then we need to set the
+	 * group address if either we want to multicast, or if we were
+	 * multicasting and want to stop */
 	if (! promisc && (mc_count || priv->mc_count) ) {
 		struct dev_mc_list *p = dev->mc_list;
 		struct hermes_multicast mclist;
@@ -1989,22 +1992,16 @@ __orinoco_set_multicast_list(struct net_device *dev)
 			printk(KERN_WARNING "%s: Multicast list is "
 			       "longer than mc_count\n", dev->name);
 
-		err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
-				       HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
-				       &mclist);
+		err = hermes_write_ltv(hw, USER_BAP,
+				   HERMES_RID_CNFGROUPADDRESSES,
+				   HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
+				   &mclist);
 		if (err)
 			printk(KERN_ERR "%s: Error %d setting multicast list.\n",
 			       dev->name, err);
 		else
 			priv->mc_count = mc_count;
 	}
-
-	/* Since we can set the promiscuous flag when it wasn't asked
-	   for, make sure the net_device knows about it. */
-	if (priv->promiscuous)
-		dev->flags |= IFF_PROMISC;
-	else
-		dev->flags &= ~IFF_PROMISC;
 }
 
 /* This must be called from user context, without locks held - use
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index c6f27b9022f..4801a363507 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -52,6 +52,8 @@ struct p54_common {
 	int (*open)(struct ieee80211_hw *dev);
 	void (*stop)(struct ieee80211_hw *dev);
 	int mode;
+	u16 seqno;
+	struct mutex conf_mutex;
 	u8 mac_addr[ETH_ALEN];
 	u8 bssid[ETH_ALEN];
 	struct pda_iq_autocal_entry *iq_autocal;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index ffaf7a6b681..29be3dc8ee0 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -413,12 +413,12 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 			last_addr = range->end_addr;
 			__skb_unlink(entry, &priv->tx_queue);
 			memset(&info->status, 0, sizeof(info->status));
-			priv->tx_stats[skb_get_queue_mapping(skb)].len--;
 			entry_hdr = (struct p54_control_hdr *) entry->data;
 			entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data;
 			if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0)
 				pad = entry_data->align[0];
 
+			priv->tx_stats[entry_data->hw_queue - 4].len--;
 			if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
 				if (!(payload->status & 0x01))
 					info->flags |= IEEE80211_TX_STAT_ACK;
@@ -553,9 +553,11 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct ieee80211_tx_queue_stats *current_queue;
 	struct p54_common *priv = dev->priv;
 	struct p54_control_hdr *hdr;
+	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	struct p54_tx_control_allocdata *txhdr;
 	size_t padding, len;
 	u8 rate;
+	u8 cts_rate = 0x20;
 
 	current_queue = &priv->tx_stats[skb_get_queue_mapping(skb)];
 	if (unlikely(current_queue->len > current_queue->limit))
@@ -580,31 +582,44 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1);
 	hdr->retry1 = hdr->retry2 = info->control.retry_limit;
 
-	memset(txhdr->wep_key, 0x0, 16);
-	txhdr->padding = 0;
-	txhdr->padding2 = 0;
-
 	/* TODO: add support for alternate retry TX rates */
 	rate = ieee80211_get_tx_rate(dev, info)->hw_value;
-	if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE)
+	if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) {
 		rate |= 0x10;
-	if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+		cts_rate |= 0x10;
+	}
+	if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
 		rate |= 0x40;
-	else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+		cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
+	} else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
 		rate |= 0x20;
+		cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
+	}
 	memset(txhdr->rateset, rate, 8);
-	txhdr->wep_key_present = 0;
-	txhdr->wep_key_len = 0;
-	txhdr->frame_type = cpu_to_le32(skb_get_queue_mapping(skb) + 4);
-	txhdr->magic4 = 0;
-	txhdr->antenna = (info->antenna_sel_tx == 0) ?
+	txhdr->key_type = 0;
+	txhdr->key_len = 0;
+	txhdr->hw_queue = skb_get_queue_mapping(skb) + 4;
+	txhdr->tx_antenna = (info->antenna_sel_tx == 0) ?
 		2 : info->antenna_sel_tx - 1;
 	txhdr->output_power = 0x7f; // HW Maximum
-	txhdr->magic5 = (info->flags & IEEE80211_TX_CTL_NO_ACK) ?
-		0 : ((rate > 0x3) ? cpu_to_le32(0x33) : cpu_to_le32(0x23));
+	txhdr->cts_rate = (info->flags & IEEE80211_TX_CTL_NO_ACK) ?
+			  0 : cts_rate;
 	if (padding)
 		txhdr->align[0] = padding;
 
+	/* FIXME: The sequence that follows is needed for this driver to
+	 * work with mac80211 since "mac80211: fix TX sequence numbers".
+	 * As with the temporary code in rt2x00, changes will be needed
+	 * to get proper sequence numbers on beacons. In addition, this
+	 * patch places the sequence number in the hardware state, which
+	 * limits us to a single virtual state.
+	 */
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			priv->seqno += 0x10;
+		ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+	}
 	/* modifies skb->cb and with it info, so must be last! */
 	p54_assign_address(dev, skb, hdr, skb->len);
 
@@ -803,8 +818,8 @@ static void p54_set_vdcf(struct ieee80211_hw *dev)
 
 	if (dev->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
 		vdcf->slottime = 9;
-		vdcf->magic1 = 0x00;
-		vdcf->magic2 = 0x10;
+		vdcf->magic1 = 0x10;
+		vdcf->magic2 = 0x00;
 	} else {
 		vdcf->slottime = 20;
 		vdcf->magic1 = 0x0a;
@@ -822,10 +837,21 @@ static int p54_start(struct ieee80211_hw *dev)
 	struct p54_common *priv = dev->priv;
 	int err;
 
+	if (!priv->cached_vdcf) {
+		priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf)+
+			priv->tx_hdr_len + sizeof(struct p54_control_hdr),
+			GFP_KERNEL);
+
+		if (!priv->cached_vdcf)
+			return -ENOMEM;
+	}
+
 	err = priv->open(dev);
 	if (!err)
 		priv->mode = IEEE80211_IF_TYPE_MNTR;
 
+	p54_init_vdcf(dev);
+
 	return err;
 }
 
@@ -886,9 +912,12 @@ static void p54_remove_interface(struct ieee80211_hw *dev,
 static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 {
 	int ret;
+	struct p54_common *priv = dev->priv;
 
+	mutex_lock(&priv->conf_mutex);
 	ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq));
 	p54_set_vdcf(dev);
+	mutex_unlock(&priv->conf_mutex);
 	return ret;
 }
 
@@ -898,10 +927,12 @@ static int p54_config_interface(struct ieee80211_hw *dev,
 {
 	struct p54_common *priv = dev->priv;
 
+	mutex_lock(&priv->conf_mutex);
 	p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 0, 1, 0, 0xF642);
 	p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 2, 0, 0, 0);
 	p54_set_leds(dev, 1, !is_multicast_ether_addr(conf->bssid), 0);
 	memcpy(priv->bssid, conf->bssid, ETH_ALEN);
+	mutex_unlock(&priv->conf_mutex);
 	return 0;
 }
 
@@ -1000,15 +1031,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
 	dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 +
 				 sizeof(struct p54_tx_control_allocdata);
 
-        priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf) +
-              priv->tx_hdr_len + sizeof(struct p54_control_hdr), GFP_KERNEL);
-
-	if (!priv->cached_vdcf) {
-		ieee80211_free_hw(dev);
-		return NULL;
-	}
-
-	p54_init_vdcf(dev);
+	mutex_init(&priv->conf_mutex);
 
 	return dev;
 }
diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h
index 2245fcce92d..8db6c0e8e54 100644
--- a/drivers/net/wireless/p54/p54common.h
+++ b/drivers/net/wireless/p54/p54common.h
@@ -183,16 +183,16 @@ struct p54_frame_sent_hdr {
 
 struct p54_tx_control_allocdata {
 	u8 rateset[8];
-	u16 padding;
-	u8 wep_key_present;
-	u8 wep_key_len;
-	u8 wep_key[16];
-	__le32 frame_type;
-	u32 padding2;
-	__le16 magic4;
-	u8 antenna;
+	u8 unalloc0[2];
+	u8 key_type;
+	u8 key_len;
+	u8 key[16];
+	u8 hw_queue;
+	u8 unalloc1[9];
+	u8 tx_antenna;
 	u8 output_power;
-	__le32 magic5;
+	u8 cts_rate;
+	u8 unalloc2[3];
 	u8 align[0];
 } __attribute__ ((packed));
 
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 815c095ef79..cbaca23a945 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -109,7 +109,17 @@ static void p54u_rx_cb(struct urb *urb)
 		urb->context = skb;
 		skb_queue_tail(&priv->rx_queue, skb);
 	} else {
+		if (!priv->hw_type)
+			skb_push(skb, sizeof(struct net2280_tx_hdr));
+
+		skb_reset_tail_pointer(skb);
 		skb_trim(skb, 0);
+		if (urb->transfer_buffer != skb_tail_pointer(skb)) {
+			/* this should not happen */
+			WARN_ON(1);
+			urb->transfer_buffer = skb_tail_pointer(skb);
+		}
+
 		skb_queue_tail(&priv->rx_queue, skb);
 	}
 
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index 97fa14e0a47..3d75a7137d3 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -2518,7 +2518,7 @@ enum {
 
 #define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024
 #define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \
-((int) (&((struct prism2_hostapd_param *) 0)->u.generic_elem.data))
+	offsetof(struct prism2_hostapd_param, u.generic_elem.data)
 
 /* Maximum length for algorithm names (-1 for nul termination)
  * used in ioctl() */
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index aa6dfb811c7..181a146b476 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1220,6 +1220,7 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
 	rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
 			   test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
 	rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
 	rt2x00_desc_write(txd, 0, word);
 }
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 3558cb21074..cd5af656932 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -633,6 +633,16 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->link.vgc_level = value;
 }
 
+/*
+ * NOTE: This function is directly ported from legacy driver, but
+ * despite it being declared it was never called. Although link tuning
+ * sounds like a good idea, and usually works well for the other drivers,
+ * it does _not_ work with rt2500usb. Enabling this function will result
+ * in TX capabilities only until association kicks in. Immediately
+ * after the successful association all TX frames will be kept in the
+ * hardware queue and never transmitted.
+ */
+#if 0
 static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
 {
 	int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
@@ -752,6 +762,9 @@ dynamic_cca_tune:
 		rt2x00dev->link.vgc_level = r17;
 	}
 }
+#else
+#define rt2500usb_link_tuner	NULL
+#endif
 
 /*
  * Initialization functions.
@@ -1121,6 +1134,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	int pipe = usb_sndbulkpipe(usb_dev, 1);
 	int length;
 	u16 reg;
+	u32 word, len;
 
 	/*
 	 * Add the descriptor in front of the skb.
@@ -1130,6 +1144,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	skbdesc->desc = entry->skb->data;
 
 	/*
+	 * Adjust the beacon databyte count. The current number is
+	 * calculated before this function gets called, but falsely
+	 * assumes that the descriptor was already present in the SKB.
+	 */
+	rt2x00_desc_read(skbdesc->desc, 0, &word);
+	len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+	len += skbdesc->desc_len;
+	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+	rt2x00_desc_write(skbdesc->desc, 0, word);
+
+	/*
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
@@ -1364,6 +1389,9 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
 		EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
+	} else {
+		rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
 	}
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
@@ -1372,9 +1400,6 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
 		EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
-	} else {
-		rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
 	}
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
@@ -1650,7 +1675,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 * Initialize all hw fields.
 	 */
 	rt2x00dev->hw->flags =
-	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_RX_INCLUDES_FCS |
 	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 	    IEEE80211_HW_SIGNAL_DBM;
@@ -1726,6 +1750,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	__set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+	__set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 07b03b3c7ef..8b10ea41b20 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -108,7 +108,10 @@
 #define SHORT_PIFS		( SIFS + SHORT_SLOT_TIME )
 #define DIFS			( PIFS + SLOT_TIME )
 #define SHORT_DIFS		( SHORT_PIFS + SHORT_SLOT_TIME )
-#define EIFS			( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define EIFS			( SIFS + DIFS + \
+				  (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define SHORT_EIFS		( SIFS + SHORT_DIFS + \
+				  (8 * (IEEE80211_HEADER + ACK_SIZE)) )
 
 /*
  * Chipset identification
@@ -365,6 +368,12 @@ struct rt2x00_intf {
 #define DELAYED_CONFIG_ERP		0x00000002
 #define DELAYED_LED_ASSOC		0x00000004
 
+	/*
+	 * Software sequence counter, this is only required
+	 * for hardware which doesn't support hardware
+	 * sequence counting.
+	 */
+	spinlock_t seqlock;
 	u16 seqno;
 };
 
@@ -597,6 +606,7 @@ enum rt2x00_flags {
 	DEVICE_STARTED_SUSPEND,
 	DEVICE_ENABLED_RADIO,
 	DEVICE_DISABLED_RADIO_HW,
+	DEVICE_DIRTY_CONFIG,
 
 	/*
 	 * Driver features
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index f20ca712504..d134c3be539 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -254,6 +254,8 @@ config:
 			libconf.ant.rx = default_ant->rx;
 		else if (active_ant->rx == ANTENNA_SW_DIVERSITY)
 			libconf.ant.rx = ANTENNA_B;
+		else
+			libconf.ant.rx = active_ant->rx;
 
 		if (conf->antenna_sel_tx)
 			libconf.ant.tx = conf->antenna_sel_tx;
@@ -261,6 +263,8 @@ config:
 			libconf.ant.tx = default_ant->tx;
 		else if (active_ant->tx == ANTENNA_SW_DIVERSITY)
 			libconf.ant.tx = ANTENNA_B;
+		else
+			libconf.ant.tx = active_ant->tx;
 	}
 
 	if (flags & CONFIG_UPDATE_SLOT_TIME) {
@@ -271,7 +275,7 @@ config:
 		libconf.sifs = SIFS;
 		libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS;
 		libconf.difs = short_slot_time ? SHORT_DIFS : DIFS;
-		libconf.eifs = EIFS;
+		libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS;
 	}
 
 	libconf.conf = conf;
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 300cf061035..6bee1d611bb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -372,9 +372,6 @@ static ssize_t rt2x00debug_write_##__name(struct file *file,	\
 	if (*offset)						\
 		return 0;					\
 								\
-	if (!capable(CAP_NET_ADMIN))				\
-		return -EPERM;					\
-								\
 	if (intf->offset_##__name >= debug->__name.word_count)	\
 		return -EINVAL;					\
 								\
@@ -454,7 +451,7 @@ static struct dentry *rt2x00debug_create_file_driver(const char *name,
 	data += sprintf(data, "compiled: %s %s\n", __DATE__, __TIME__);
 	blob->size = strlen(blob->data);
 
-	return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob);
+	return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob);
 }
 
 static struct dentry *rt2x00debug_create_file_chipset(const char *name,
@@ -482,7 +479,7 @@ static struct dentry *rt2x00debug_create_file_chipset(const char *name,
 	data += sprintf(data, "rf length: %d\n", debug->rf.word_count);
 	blob->size = strlen(blob->data);
 
-	return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob);
+	return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob);
 }
 
 void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
@@ -517,7 +514,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 	if (IS_ERR(intf->chipset_entry))
 		goto exit;
 
-	intf->dev_flags = debugfs_create_file("dev_flags", S_IRUGO,
+	intf->dev_flags = debugfs_create_file("dev_flags", S_IRUSR,
 					      intf->driver_folder, intf,
 					      &rt2x00debug_fop_dev_flags);
 	if (IS_ERR(intf->dev_flags))
@@ -532,7 +529,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 ({								\
 	(__intf)->__name##_off_entry =				\
 	    debugfs_create_u32(__stringify(__name) "_offset",	\
-			       S_IRUGO | S_IWUSR,		\
+			       S_IRUSR | S_IWUSR,		\
 			       (__intf)->register_folder,	\
 			       &(__intf)->offset_##__name);	\
 	if (IS_ERR((__intf)->__name##_off_entry))		\
@@ -540,7 +537,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 								\
 	(__intf)->__name##_val_entry =				\
 	    debugfs_create_file(__stringify(__name) "_value",	\
-				S_IRUGO | S_IWUSR,		\
+				S_IRUSR | S_IWUSR,		\
 				(__intf)->register_folder,	\
 				(__intf), &rt2x00debug_fop_##__name);\
 	if (IS_ERR((__intf)->__name##_val_entry))		\
@@ -560,7 +557,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 		goto exit;
 
 	intf->queue_frame_dump_entry =
-	    debugfs_create_file("dump", S_IRUGO, intf->queue_folder,
+	    debugfs_create_file("dump", S_IRUSR, intf->queue_folder,
 				intf, &rt2x00debug_fop_queue_dump);
 	if (IS_ERR(intf->queue_frame_dump_entry))
 		goto exit;
@@ -569,7 +566,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 	init_waitqueue_head(&intf->frame_dump_waitqueue);
 
 	intf->queue_stats_entry =
-	    debugfs_create_file("queue", S_IRUGO, intf->queue_folder,
+	    debugfs_create_file("queue", S_IRUSR, intf->queue_folder,
 				intf, &rt2x00debug_fop_queue_stats);
 
 	return;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 8c93eb8353b..f42283ad7b0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1013,6 +1013,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->intf_associated = 0;
 
 	__set_bit(DEVICE_STARTED, &rt2x00dev->flags);
+	__set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
 
 	return 0;
 }
@@ -1237,9 +1238,9 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Reconfigure device.
 	 */
-	rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
-	if (!rt2x00dev->hw->conf.radio_enabled)
-		rt2x00lib_disable_radio(rt2x00dev);
+	retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
+	if (retval)
+		goto exit;
 
 	/*
 	 * Iterator over each active interface to
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index f2c9b0e79b5..c5fb3a72cf3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -125,13 +125,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 
 /**
- * rt2x00queue_free_skb - free a skb
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @skb: The skb to free.
- */
-void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
-
-/**
  * rt2x00queue_write_tx_frame - Write TX frame to hardware
  * @queue: Queue over which the frame should be send
  * @skb: The skb to send
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index f1dcbaa80c3..d0650738863 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -63,7 +63,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	 */
 	memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
 	rts_info = IEEE80211_SKB_CB(skb);
-	rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+	rts_info->control.hw_key = NULL;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
 	rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -83,6 +83,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 				  (struct ieee80211_rts *)(skb->data));
 
 	if (rt2x00queue_write_tx_frame(queue, skb)) {
+		dev_kfree_skb_any(skb);
 		WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
 		return NETDEV_TX_BUSY;
 	}
@@ -96,7 +97,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	enum data_queue_qid qid = skb_get_queue_mapping(skb);
-	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
 	struct data_queue *queue;
 	u16 frame_control;
 
@@ -152,18 +152,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		}
 	}
 
-	/*
-	 * XXX: This is as wrong as the old mac80211 code was,
-	 *	due to beacons not getting sequence numbers assigned
-	 *	properly.
-	 */
-	if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-		if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
-			intf->seqno += 0x10;
-		ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-		ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
-	}
-
 	if (rt2x00queue_write_tx_frame(queue, skb)) {
 		ieee80211_stop_queue(rt2x00dev->hw, qid);
 		return NETDEV_TX_BUSY;
@@ -215,23 +203,43 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	    !test_bit(DEVICE_STARTED, &rt2x00dev->flags))
 		return -ENODEV;
 
-	/*
-	 * We don't support mixed combinations of sta and ap virtual
-	 * interfaces. We can only add this interface when the rival
-	 * interface count is 0.
-	 */
-	if ((conf->type == IEEE80211_IF_TYPE_AP && rt2x00dev->intf_sta_count) ||
-	    (conf->type != IEEE80211_IF_TYPE_AP && rt2x00dev->intf_ap_count))
-		return -ENOBUFS;
-
-	/*
-	 * Check if we exceeded the maximum amount of supported interfaces.
-	 */
-	if ((conf->type == IEEE80211_IF_TYPE_AP &&
-	     rt2x00dev->intf_ap_count >= rt2x00dev->ops->max_ap_intf) ||
-	    (conf->type != IEEE80211_IF_TYPE_AP &&
-	     rt2x00dev->intf_sta_count >= rt2x00dev->ops->max_sta_intf))
-		return -ENOBUFS;
+	switch (conf->type) {
+	case IEEE80211_IF_TYPE_AP:
+		/*
+		 * We don't support mixed combinations of
+		 * sta and ap interfaces.
+		 */
+		if (rt2x00dev->intf_sta_count)
+			return -ENOBUFS;
+
+		/*
+		 * Check if we exceeded the maximum amount
+		 * of supported interfaces.
+		 */
+		if (rt2x00dev->intf_ap_count >= rt2x00dev->ops->max_ap_intf)
+			return -ENOBUFS;
+
+		break;
+	case IEEE80211_IF_TYPE_STA:
+	case IEEE80211_IF_TYPE_IBSS:
+		/*
+		 * We don't support mixed combinations of
+		 * sta and ap interfaces.
+		 */
+		if (rt2x00dev->intf_ap_count)
+			return -ENOBUFS;
+
+		/*
+		 * Check if we exceeded the maximum amount
+		 * of supported interfaces.
+		 */
+		if (rt2x00dev->intf_sta_count >= rt2x00dev->ops->max_sta_intf)
+			return -ENOBUFS;
+
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	/*
 	 * Loop through all beacon queues to find a free
@@ -259,6 +267,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 		rt2x00dev->intf_sta_count++;
 
 	spin_lock_init(&intf->lock);
+	spin_lock_init(&intf->seqlock);
 	intf->beacon = entry;
 
 	if (conf->type == IEEE80211_IF_TYPE_AP)
@@ -322,6 +331,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
 int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
+	int force_reconfig;
 
 	/*
 	 * Mac80211 might be calling this function while we are trying
@@ -341,7 +351,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 			rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 	}
 
-	rt2x00lib_config(rt2x00dev, conf, 0);
+	/*
+	 * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
+	 * been started and the configuration must be forced upon the hardware.
+	 * Otherwise registers will not be intialized correctly and could
+	 * result in non-working hardware because essential registers aren't
+	 * initialized.
+	 */
+	force_reconfig =
+	    __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+
+	rt2x00lib_config(rt2x00dev, conf, force_reconfig);
 
 	/*
 	 * Reenable RX only if the radio should be on.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 7f442030f5a..898cdd7f57d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -120,6 +120,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
 	struct ieee80211_rate *rate =
 	    ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
@@ -127,6 +128,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	unsigned int data_length;
 	unsigned int duration;
 	unsigned int residual;
+	unsigned long irqflags;
 
 	memset(txdesc, 0, sizeof(*txdesc));
 
@@ -200,6 +202,31 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	}
 
 	/*
+	 * Hardware should insert sequence counter.
+	 * FIXME: We insert a software sequence counter first for
+	 * hardware that doesn't support hardware sequence counting.
+	 *
+	 * This is wrong because beacons are not getting sequence
+	 * numbers assigned properly.
+	 *
+	 * A secondary problem exists for drivers that cannot toggle
+	 * sequence counting per-frame, since those will override the
+	 * sequence counter given by mac80211.
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		spin_lock_irqsave(&intf->seqlock, irqflags);
+
+		if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
+			intf->seqno += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+
+		spin_unlock_irqrestore(&intf->seqlock, irqflags);
+
+		__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+	}
+
+	/*
 	 * PLCP setup
 	 * Length calculation depends on OFDM/CCK rate.
 	 */
@@ -466,9 +493,12 @@ void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev)
 	if (!rt2x00dev->ops->lib->init_rxentry)
 		return;
 
-	for (i = 0; i < queue->limit; i++)
+	for (i = 0; i < queue->limit; i++) {
+		queue->entries[i].flags = 0;
+
 		rt2x00dev->ops->lib->init_rxentry(rt2x00dev,
 						  &queue->entries[i]);
+	}
 }
 
 void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
@@ -482,9 +512,12 @@ void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
 		if (!rt2x00dev->ops->lib->init_txentry)
 			continue;
 
-		for (i = 0; i < queue->limit; i++)
+		for (i = 0; i < queue->limit; i++) {
+			queue->entries[i].flags = 0;
+
 			rt2x00dev->ops->lib->init_txentry(rt2x00dev,
 							  &queue->entries[i]);
+		}
 	}
 }
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 8945945c892..ff78e52ce43 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -173,10 +173,10 @@ struct rxdone_entry_desc {
  *	frame transmission failed due to excessive retries.
  */
 enum txdone_entry_desc_flags {
-	TXDONE_UNKNOWN = 1 << 0,
-	TXDONE_SUCCESS = 1 << 1,
-	TXDONE_FAILURE = 1 << 2,
-	TXDONE_EXCESSIVE_RETRY = 1 << 3,
+	TXDONE_UNKNOWN,
+	TXDONE_SUCCESS,
+	TXDONE_FAILURE,
+	TXDONE_EXCESSIVE_RETRY,
 };
 
 /**
@@ -199,6 +199,7 @@ struct txdone_entry_desc {
  * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame.
  * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame.
  * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate.
+ * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter.
  * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame.
  * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment.
  * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted.
@@ -210,6 +211,7 @@ enum txentry_desc_flags {
 	ENTRY_TXD_RTS_FRAME,
 	ENTRY_TXD_CTS_FRAME,
 	ENTRY_TXD_OFDM_RATE,
+	ENTRY_TXD_GENERATE_SEQ,
 	ENTRY_TXD_FIRST_FRAGMENT,
 	ENTRY_TXD_MORE_FRAG,
 	ENTRY_TXD_REQ_TIMESTAMP,
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 7e88ce5651b..2ea7866abd5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -136,7 +136,7 @@ struct rt2x00_field32 {
  */
 #define is_power_of_two(x)	( !((x) & ((x)-1)) )
 #define low_bit_mask(x)		( ((x)-1) & ~(x) )
-#define is_valid_mask(x)	is_power_of_two(1 + (x) + low_bit_mask(x))
+#define is_valid_mask(x)	is_power_of_two(1LU + (x) + low_bit_mask(x))
 
 /*
  * Macro's to find first set bit in a variable.
@@ -173,8 +173,7 @@ struct rt2x00_field32 {
  * does not exceed the given typelimit.
  */
 #define FIELD_CHECK(__mask, __type)			\
-	BUILD_BUG_ON(!__builtin_constant_p(__mask) ||	\
-		     !(__mask) ||			\
+	BUILD_BUG_ON(!(__mask) ||			\
 		     !is_valid_mask(__mask) ||		\
 		     (__mask) != (__type)(__mask))	\
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 83862e7f7ae..2050227ea53 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -122,6 +122,38 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
 
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+					const u8 request, const u8 requesttype,
+					const u16 offset, const void *buffer,
+					const u16 buffer_length,
+					const int timeout)
+{
+	int status = 0;
+	unsigned char *tb;
+	u16 off, len, bsize;
+
+	mutex_lock(&rt2x00dev->usb_cache_mutex);
+
+	tb  = (char *)buffer;
+	off = offset;
+	len = buffer_length;
+	while (len && !status) {
+		bsize = min_t(u16, CSR_CACHE_SIZE, len);
+		status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
+							requesttype, off, tb,
+							bsize, timeout);
+
+		tb  += bsize;
+		len -= bsize;
+		off += bsize;
+	}
+
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);
+
 /*
  * TX data handlers.
  */
@@ -149,6 +181,7 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
 	 * (Only indirectly by looking at the failed TX counters
 	 * in the register).
 	 */
+	txdesc.flags = 0;
 	if (!urb->status)
 		__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
 	else
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index aad794adf52..3b4a67417f9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -70,8 +70,7 @@
 /*
  * Cache size
  */
-#define CSR_CACHE_SIZE			8
-#define CSR_CACHE_SIZE_FIRMWARE		64
+#define CSR_CACHE_SIZE			64
 
 /*
  * USB request types.
@@ -172,6 +171,25 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
 				   const u16 buffer_length, const int timeout);
 
 /**
+ * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register start offset to perform action on
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
+ * This function is used to transfer register data in blocks larger
+ * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons.
+ */
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+					const u8 request, const u8 requesttype,
+					const u16 offset, const void *buffer,
+					const u16 buffer_length,
+					const int timeout);
+
+/**
  * rt2x00usb_vendor_request_sw - Send single register command to device
  * @rt2x00dev: Pointer to &struct rt2x00_dev
  * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f7c1f92c144..087e90b328c 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1004,6 +1004,11 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
 	}
 
 	/*
+	 * Hardware needs another millisecond before it is ready.
+	 */
+	msleep(1);
+
+	/*
 	 * Reset MAC and BBP registers.
 	 */
 	reg = 0;
@@ -1544,7 +1549,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
 	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
 	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
 	rt2x00_desc_write(txd, 1, word);
 
@@ -2278,7 +2284,6 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 * Initialize all hw fields.
 	 */
 	rt2x00dev->hw->flags =
-	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = 0;
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index d383735ab8f..9761eaaa08b 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -890,9 +890,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
 	unsigned int i;
 	int status;
 	u32 reg;
-	const char *ptr = data;
-	char *cache;
-	int buflen;
 
 	/*
 	 * Wait for stable hardware.
@@ -911,31 +908,12 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
 
 	/*
 	 * Write firmware to device.
-	 * We setup a seperate cache for this action,
-	 * since we are going to write larger chunks of data
-	 * then normally used cache size.
 	 */
-	cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
-	if (!cache) {
-		ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
-		buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
-
-		memcpy(cache, ptr, buflen);
-
-		rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
-					 USB_VENDOR_REQUEST_OUT,
-					 FIRMWARE_IMAGE_BASE + i, 0,
-					 cache, buflen,
-					 REGISTER_TIMEOUT32(buflen));
-
-		ptr += buflen;
-	}
-
-	kfree(cache);
+	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+					    USB_VENDOR_REQUEST_OUT,
+					    FIRMWARE_IMAGE_BASE,
+					    data, len,
+					    REGISTER_TIMEOUT32(len));
 
 	/*
 	 * Send firmware request to device to load firmware,
@@ -1303,7 +1281,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
 	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
 	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 	rt2x00_desc_write(txd, 1, word);
 
 	rt2x00_desc_read(txd, 2, &word);
@@ -1352,6 +1331,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	unsigned int beacon_base;
 	u32 reg;
+	u32 word, len;
 
 	/*
 	 * Add the descriptor in front of the skb.
@@ -1361,6 +1341,17 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	skbdesc->desc = entry->skb->data;
 
 	/*
+	 * Adjust the beacon databyte count. The current number is
+	 * calculated before this function gets called, but falsely
+	 * assumes that the descriptor was already present in the SKB.
+	 */
+	rt2x00_desc_read(skbdesc->desc, 0, &word);
+	len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+	len += skbdesc->desc_len;
+	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+	rt2x00_desc_write(skbdesc->desc, 0, word);
+
+	/*
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
@@ -1374,10 +1365,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	 * Write entire beacon with descriptor to register.
 	 */
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
-				 USB_VENDOR_REQUEST_OUT, beacon_base, 0,
-				 entry->skb->data, entry->skb->len,
-				 REGISTER_TIMEOUT32(entry->skb->len));
+	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+					    USB_VENDOR_REQUEST_OUT, beacon_base,
+					    entry->skb->data, entry->skb->len,
+					    REGISTER_TIMEOUT32(entry->skb->len));
 
 	/*
 	 * Clean up the beacon skb.
@@ -1871,7 +1862,6 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 * Initialize all hw fields.
 	 */
 	rt2x00dev->hw->flags =
-	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h
index 3afb49f8866..5a9515c9996 100644
--- a/drivers/net/wireless/rtl8187.h
+++ b/drivers/net/wireless/rtl8187.h
@@ -47,11 +47,13 @@ struct rtl8187_rx_hdr {
 struct rtl8187b_rx_hdr {
 	__le32 flags;
 	__le64 mac_time;
-	u8 noise;
-	u8 signal;
+	u8 sq;
+	u8 rssi;
 	u8 agc;
-	u8 reserved;
-	__le32 unused;
+	u8 flags2;
+	__le16 snr_long2end;
+	s8 pwdb_g12;
+	u8 fot;
 } __attribute__((packed));
 
 /* {rtl8187,rtl8187b}_tx_info is in skb */
@@ -92,6 +94,10 @@ struct rtl8187_priv {
 	const struct rtl818x_rf_ops *rf;
 	struct ieee80211_vif *vif;
 	int mode;
+	/* The mutex protects the TX loopback state.
+	 * Any attempt to set channels concurrently locks the device.
+	 */
+	struct mutex conf_mutex;
 
 	/* rtl8187 specific */
 	struct ieee80211_channel channels[14];
@@ -100,6 +106,7 @@ struct rtl8187_priv {
 	struct usb_device *udev;
 	u32 rx_conf;
 	u16 txpwr_base;
+	u16 seqno;
 	u8 asic_rev;
 	u8 is_rtl8187b;
 	enum {
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index d3067b1216c..ca5deb6244e 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -31,6 +31,8 @@ MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
 MODULE_LICENSE("GPL");
 
 static struct usb_device_id rtl8187_table[] __devinitdata = {
+	/* Asus */
+	{USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
 	/* Realtek */
 	{USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
@@ -38,6 +40,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = {
 	/* Netgear */
 	{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
+	{USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
 	/* HP */
 	{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
 	/* Sitecom */
@@ -169,6 +172,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct rtl8187_priv *priv = dev->priv;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	unsigned int ep;
 	void *buf;
 	struct urb *urb;
@@ -234,6 +238,20 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 			ep = epmap[skb_get_queue_mapping(skb)];
 	}
 
+	/* FIXME: The sequence that follows is needed for this driver to
+	 * work with mac80211 since "mac80211: fix TX sequence numbers".
+	 * As with the temporary code in rt2x00, changes will be needed
+	 * to get proper sequence numbers on beacons. In addition, this
+	 * patch places the sequence number in the hardware state, which
+	 * limits us to a single virtual state.
+	 */
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			priv->seqno += 0x10;
+		ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+	}
+
 	info->driver_data[0] = dev;
 	info->driver_data[1] = urb;
 
@@ -257,6 +275,7 @@ static void rtl8187_rx_cb(struct urb *urb)
 	struct ieee80211_rx_status rx_status = { 0 };
 	int rate, signal;
 	u32 flags;
+	u32 quality;
 
 	spin_lock(&priv->rx_queue.lock);
 	if (skb->next)
@@ -280,44 +299,57 @@ static void rtl8187_rx_cb(struct urb *urb)
 		flags = le32_to_cpu(hdr->flags);
 		signal = hdr->signal & 0x7f;
 		rx_status.antenna = (hdr->signal >> 7) & 1;
-		rx_status.signal = signal;
 		rx_status.noise = hdr->noise;
 		rx_status.mactime = le64_to_cpu(hdr->mac_time);
-		priv->signal = signal;
 		priv->quality = signal;
+		rx_status.qual = priv->quality;
 		priv->noise = hdr->noise;
+		rate = (flags >> 20) & 0xF;
+		if (rate > 3) { /* OFDM rate */
+			if (signal > 90)
+				signal = 90;
+			else if (signal < 25)
+				signal = 25;
+			signal = 90 - signal;
+		} else {	/* CCK rate */
+			if (signal > 95)
+				signal = 95;
+			else if (signal < 30)
+				signal = 30;
+			signal = 95 - signal;
+		}
+		rx_status.signal = signal;
+		priv->signal = signal;
 	} else {
 		struct rtl8187b_rx_hdr *hdr =
 			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
+		/* The Realtek datasheet for the RTL8187B shows that the RX
+		 * header contains the following quantities: signal quality,
+		 * RSSI, AGC, the received power in dB, and the measured SNR.
+		 * In testing, none of these quantities show qualitative
+		 * agreement with AP signal strength, except for the AGC,
+		 * which is inversely proportional to the strength of the
+		 * signal. In the following, the quality and signal strength
+		 * are derived from the AGC. The arbitrary scaling constants
+		 * are chosen to make the results close to the values obtained
+		 * for a BCM4312 using b43 as the driver. The noise is ignored
+		 * for now.
+		 */
 		flags = le32_to_cpu(hdr->flags);
-		signal = hdr->agc >> 1;
-		rx_status.antenna = (hdr->signal >> 7) & 1;
-		rx_status.signal = 64 - min(hdr->noise, (u8)64);
-		rx_status.noise = hdr->noise;
+		quality = 170 - hdr->agc;
+		if (quality > 100)
+			quality = 100;
+		signal = 14 - hdr->agc / 2;
+		rx_status.qual = quality;
+		priv->quality = quality;
+		rx_status.signal = signal;
+		priv->signal = signal;
+		rx_status.antenna = (hdr->rssi >> 7) & 1;
 		rx_status.mactime = le64_to_cpu(hdr->mac_time);
-		priv->signal = hdr->signal;
-		priv->quality = hdr->agc >> 1;
-		priv->noise = hdr->noise;
+		rate = (flags >> 20) & 0xF;
 	}
 
 	skb_trim(skb, flags & 0x0FFF);
-	rate = (flags >> 20) & 0xF;
-	if (rate > 3) {	/* OFDM rate */
-		if (signal > 90)
-			signal = 90;
-		else if (signal < 25)
-			signal = 25;
-		signal = 90 - signal;
-	} else {	/* CCK rate */
-		if (signal > 95)
-			signal = 95;
-		else if (signal < 30)
-			signal = 30;
-		signal = 95 - signal;
-	}
-
-	rx_status.qual = priv->quality;
-	rx_status.signal = signal;
 	rx_status.rate_idx = rate;
 	rx_status.freq = dev->conf.channel->center_freq;
 	rx_status.band = dev->conf.channel->band;
@@ -697,6 +729,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 	if (ret)
 		return ret;
 
+	mutex_lock(&priv->conf_mutex);
 	if (priv->is_rtl8187b) {
 		reg = RTL818X_RX_CONF_MGMT |
 		      RTL818X_RX_CONF_DATA |
@@ -718,6 +751,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 				  (7 << 0  /* long retry limit */) |
 				  (7 << 21 /* MAX TX DMA */));
 		rtl8187_init_urbs(dev);
+		mutex_unlock(&priv->conf_mutex);
 		return 0;
 	}
 
@@ -761,6 +795,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 	reg |= RTL818X_CMD_TX_ENABLE;
 	reg |= RTL818X_CMD_RX_ENABLE;
 	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+	mutex_unlock(&priv->conf_mutex);
 
 	return 0;
 }
@@ -772,6 +807,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
 	struct sk_buff *skb;
 	u32 reg;
 
+	mutex_lock(&priv->conf_mutex);
 	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
 
 	reg = rtl818x_ioread8(priv, &priv->map->CMD);
@@ -791,7 +827,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
 		usb_kill_urb(info->urb);
 		kfree_skb(skb);
 	}
-	return;
+	mutex_unlock(&priv->conf_mutex);
 }
 
 static int rtl8187_add_interface(struct ieee80211_hw *dev,
@@ -811,6 +847,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
 		return -EOPNOTSUPP;
 	}
 
+	mutex_lock(&priv->conf_mutex);
 	priv->vif = conf->vif;
 
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
@@ -819,6 +856,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
 				 ((u8 *)conf->mac_addr)[i]);
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 
+	mutex_unlock(&priv->conf_mutex);
 	return 0;
 }
 
@@ -826,8 +864,10 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev,
 				     struct ieee80211_if_init_conf *conf)
 {
 	struct rtl8187_priv *priv = dev->priv;
+	mutex_lock(&priv->conf_mutex);
 	priv->mode = IEEE80211_IF_TYPE_MNTR;
 	priv->vif = NULL;
+	mutex_unlock(&priv->conf_mutex);
 }
 
 static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
@@ -835,6 +875,7 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 	struct rtl8187_priv *priv = dev->priv;
 	u32 reg;
 
+	mutex_lock(&priv->conf_mutex);
 	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
 	/* Enable TX loopback on MAC level to avoid TX during channel
 	 * changes, as this has be seen to causes problems and the
@@ -867,6 +908,7 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 	rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
 	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
 	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
+	mutex_unlock(&priv->conf_mutex);
 	return 0;
 }
 
@@ -878,6 +920,7 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev,
 	int i;
 	u8 reg;
 
+	mutex_lock(&priv->conf_mutex);
 	for (i = 0; i < ETH_ALEN; i++)
 		rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
 
@@ -891,6 +934,7 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev,
 		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
 	}
 
+	mutex_unlock(&priv->conf_mutex);
 	return 0;
 }
 
@@ -1015,9 +1059,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 
 	priv->mode = IEEE80211_IF_TYPE_MNTR;
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		     IEEE80211_HW_RX_INCLUDES_FCS |
-		     IEEE80211_HW_SIGNAL_UNSPEC;
-	dev->max_signal = 65;
+		     IEEE80211_HW_RX_INCLUDES_FCS;
 
 	eeprom.data = dev;
 	eeprom.register_read = rtl8187_eeprom_register_read;
@@ -1132,10 +1174,16 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 		(*channel++).hw_value = txpwr >> 8;
 	}
 
-	if (priv->is_rtl8187b)
+	if (priv->is_rtl8187b) {
 		printk(KERN_WARNING "rtl8187: 8187B chip detected. Support "
 			"is EXPERIMENTAL, and could damage your\n"
 			"         hardware, use at your own risk\n");
+		dev->flags |= IEEE80211_HW_SIGNAL_DBM;
+	} else {
+		dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC;
+		dev->max_signal = 65;
+	}
+
 	if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
 		printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
 		       " info!\n");
@@ -1154,6 +1202,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 		printk(KERN_ERR "rtl8187: Cannot register device\n");
 		goto err_free_dev;
 	}
+	mutex_init(&priv->conf_mutex);
 
 	printk(KERN_INFO "%s: hwaddr %s, %s V%d + %s\n",
 	       wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index 49ae9700395..136220b5ca8 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -1409,9 +1409,6 @@ static void wavelan_set_multicast_list(struct net_device * dev)
 			lp->mc_count = 0;
 
 			wv_82586_reconfig(dev);
-
-			/* Tell the kernel that we are doing a really bad job. */
-			dev->flags |= IFF_PROMISC;
 		}
 	} else
 		/* Are there multicast addresses to send? */
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index b584c0ecc62..00a3559e5aa 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -1412,9 +1412,6 @@ wavelan_set_multicast_list(struct net_device *	dev)
 	  lp->mc_count = 0;
 
 	  wv_82593_reconfig(dev);
-
-	  /* Tell the kernel that we are doing a really bad job... */
-	  dev->flags |= IFF_PROMISC;
 	}
     }
   else
@@ -1433,9 +1430,6 @@ wavelan_set_multicast_list(struct net_device *	dev)
 	    lp->mc_count = 0;
 
 	    wv_82593_reconfig(dev);
-
-	    /* Tell the kernel that we are doing a really bad job... */
-	    dev->flags |= IFF_ALLMULTI;
 	  }
       }
     else
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index fcc532bb6a7..4d7b98b0503 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -935,7 +935,6 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
 	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
 
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 		    IEEE80211_HW_SIGNAL_DB;
 
 	hw->max_signal = 100;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 902bbe78821..c749bdba214 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -329,7 +329,7 @@ static int xennet_open(struct net_device *dev)
 	}
 	spin_unlock_bh(&np->rx_lock);
 
-	xennet_maybe_wake_tx(dev);
+	netif_start_queue(dev);
 
 	return 0;
 }
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 8a1d93a2bb8..51e5214071d 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -57,6 +57,15 @@ static ssize_t devspec_show(struct device *dev,
 	return sprintf(buf, "%s\n", ofdev->node->full_name);
 }
 
+static ssize_t name_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct of_device *ofdev;
+
+	ofdev = to_of_device(dev);
+	return sprintf(buf, "%s\n", ofdev->node->name);
+}
+
 static ssize_t modalias_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
@@ -71,6 +80,7 @@ static ssize_t modalias_show(struct device *dev,
 
 struct device_attribute of_platform_device_attrs[] = {
 	__ATTR_RO(devspec),
+	__ATTR_RO(name),
 	__ATTR_RO(modalias),
 	__ATTR_NULL
 };
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index 2450b3a393f..7ba78e6d210 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -38,8 +38,10 @@ void free_cpu_buffers(void)
 {
 	int i;
  
-	for_each_online_cpu(i)
+	for_each_online_cpu(i) {
 		vfree(per_cpu(cpu_buffer, i).buffer);
+		per_cpu(cpu_buffer, i).buffer = NULL;
+	}
 }
 
 int alloc_cpu_buffers(void)
diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c
index e7fbac52993..8d692a5c8e7 100644
--- a/drivers/oprofile/event_buffer.c
+++ b/drivers/oprofile/event_buffer.c
@@ -93,6 +93,8 @@ out:
 void free_event_buffer(void)
 {
 	vfree(event_buffer);
+
+	event_buffer = NULL;
 }
 
  
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index 93e37f0666a..e17ef54f0ef 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -382,7 +382,7 @@ EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
 int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 {
 	acpi_status status;
-	acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+	acpi_handle chandle, handle;
 	struct pci_dev *pdev = dev;
 	struct pci_bus *parent;
 	struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -399,10 +399,25 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 	 * Per PCI firmware specification, we should run the ACPI _OSC
 	 * method to get control of hotplug hardware before using it. If
 	 * an _OSC is missing, we look for an OSHP to do the same thing.
-	 * To handle different BIOS behavior, we look for _OSC and OSHP
-	 * within the scope of the hotplug controller and its parents,
+	 * To handle different BIOS behavior, we look for _OSC on a root
+	 * bridge preferentially (according to PCI fw spec). Later for
+	 * OSHP within the scope of the hotplug controller and its parents,
 	 * upto the host bridge under which this controller exists.
 	 */
+	handle = acpi_find_root_bridge_handle(pdev);
+	if (handle) {
+		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
+		dbg("Trying to get hotplug control for %s\n",
+				(char *)string.pointer);
+		status = pci_osc_control_set(handle, flags);
+		if (ACPI_SUCCESS(status))
+			goto got_one;
+		kfree(string.pointer);
+		string = (struct acpi_buffer){ ACPI_ALLOCATE_BUFFER, NULL };
+	}
+
+	pdev = dev;
+	handle = DEVICE_ACPI_HANDLE(&dev->dev);
 	while (!handle) {
 		/*
 		 * This hotplug controller was not listed in the ACPI name
@@ -427,15 +442,9 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
 		dbg("Trying to get hotplug control for %s \n",
 		    (char *)string.pointer);
-		status = pci_osc_control_set(handle, flags);
-		if (status == AE_NOT_FOUND)
-			status = acpi_run_oshp(handle);
-		if (ACPI_SUCCESS(status)) {
-			dbg("Gained control for hotplug HW for pci %s (%s)\n",
-			    pci_name(dev), (char *)string.pointer);
-			kfree(string.pointer);
-			return 0;
-		}
+		status = acpi_run_oshp(handle);
+		if (ACPI_SUCCESS(status))
+			goto got_one;
 		if (acpi_root_bridge(handle))
 			break;
 		chandle = handle;
@@ -449,6 +458,11 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 
 	kfree(string.pointer);
 	return -ENODEV;
+got_one:
+	dbg("Gained control for hotplug HW for pci %s (%s)\n", pci_name(dev),
+			(char *)string.pointer);
+	kfree(string.pointer);
+	return 0;
 }
 EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
 
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 40337a06c18..146ca9cd156 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -320,15 +320,15 @@ static int disable_slot(struct hotplug_slot *slot)
 			return -ENODEV;
 		}
 
+		/* remove the device from the pci core */
+		pci_remove_bus_device(dev);
+
 		/* queue work item to blow away this sysfs entry and other
 		 * parts.
 		 */
 		INIT_WORK(&dslot->remove_work, remove_slot_worker);
 		queue_work(dummyphp_wq, &dslot->remove_work);
 
-		/* blow away this sysfs entry and other parts. */
-		remove_slot(dslot);
-
 		pci_dev_put(dev);
 	}
 	return 0;
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index e3a1e7e7dba..9e6cec67e1c 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -43,7 +43,6 @@ extern int pciehp_poll_mode;
 extern int pciehp_poll_time;
 extern int pciehp_debug;
 extern int pciehp_force;
-extern int pciehp_slot_with_bus;
 extern struct workqueue_struct *pciehp_wq;
 
 #define dbg(format, arg...)						\
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 3677495c4f9..4fd5355bc3b 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -41,7 +41,6 @@ int pciehp_debug;
 int pciehp_poll_mode;
 int pciehp_poll_time;
 int pciehp_force;
-int pciehp_slot_with_bus;
 struct workqueue_struct *pciehp_wq;
 
 #define DRIVER_VERSION	"0.4"
@@ -56,12 +55,10 @@ module_param(pciehp_debug, bool, 0644);
 module_param(pciehp_poll_mode, bool, 0644);
 module_param(pciehp_poll_time, int, 0644);
 module_param(pciehp_force, bool, 0644);
-module_param(pciehp_slot_with_bus, bool, 0644);
 MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not");
 MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not");
 MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds");
 MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing");
-MODULE_PARM_DESC(pciehp_slot_with_bus, "Use bus number in the slot name");
 
 #define PCIE_MODULE_NAME "pciehp"
 
@@ -194,6 +191,7 @@ static int init_slots(struct controller *ctrl)
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
+	int len, dup = 1;
 	int retval = -ENOMEM;
 
 	list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
@@ -220,15 +218,24 @@ static int init_slots(struct controller *ctrl)
 		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
 		    "slot_device_offset=%x\n", slot->bus, slot->device,
 		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
+duplicate_name:
 		retval = pci_hp_register(hotplug_slot,
 					 ctrl->pci_dev->subordinate,
 					 slot->device);
 		if (retval) {
+			/*
+			 * If slot N already exists, we'll try to create
+			 * slot N-1, N-2 ... N-M, until we overflow.
+			 */
+			if (retval == -EEXIST) {
+				len = snprintf(slot->name, SLOT_NAME_SIZE,
+					       "%d-%d", slot->number, dup++);
+				if (len < SLOT_NAME_SIZE)
+					goto duplicate_name;
+				else
+					err("duplicate slot name overflow\n");
+			}
 			err("pci_hp_register failed with error %d\n", retval);
-			if (retval == -EEXIST)
-				err("Failed to register slot because of name "
-				    "collision. Try \'pciehp_slot_with_bus\' "
-				    "module option.\n");
 			goto error_info;
 		}
 		/* create additional sysfs entries */
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index ad27e9e225a..9d934ddee95 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -258,7 +258,7 @@ static int pcie_poll_cmd(struct controller *ctrl)
 			return 1;
 		}
 	}
-	while (timeout > 1000) {
+	while (timeout > 0) {
 		msleep(10);
 		timeout -= 10;
 		if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
@@ -1030,15 +1030,6 @@ static void pcie_shutdown_notification(struct controller *ctrl)
 	pciehp_free_irq(ctrl);
 }
 
-static void make_slot_name(struct slot *slot)
-{
-	if (pciehp_slot_with_bus)
-		snprintf(slot->name, SLOT_NAME_SIZE, "%04d_%04d",
-			 slot->bus, slot->number);
-	else
-		snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
-}
-
 static int pcie_init_slot(struct controller *ctrl)
 {
 	struct slot *slot;
@@ -1053,7 +1044,7 @@ static int pcie_init_slot(struct controller *ctrl)
 	slot->device = ctrl->slot_device_offset + slot->hp_slot;
 	slot->hpc_ops = ctrl->hpc_ops;
 	slot->number = ctrl->first_slot;
-	make_slot_name(slot);
+	snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
 	mutex_init(&slot->lock);
 	INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
 	list_add(&slot->slot_list, &ctrl->slot_list);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index a8cbd039b85..cc38615395f 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -39,7 +39,6 @@
 int shpchp_debug;
 int shpchp_poll_mode;
 int shpchp_poll_time;
-static int shpchp_slot_with_bus;
 struct workqueue_struct *shpchp_wq;
 
 #define DRIVER_VERSION	"0.4"
@@ -53,11 +52,9 @@ MODULE_LICENSE("GPL");
 module_param(shpchp_debug, bool, 0644);
 module_param(shpchp_poll_mode, bool, 0644);
 module_param(shpchp_poll_time, int, 0644);
-module_param(shpchp_slot_with_bus, bool, 0644);
 MODULE_PARM_DESC(shpchp_debug, "Debugging mode enabled or not");
 MODULE_PARM_DESC(shpchp_poll_mode, "Using polling mechanism for hot-plug events or not");
 MODULE_PARM_DESC(shpchp_poll_time, "Polling mechanism frequency, in seconds");
-MODULE_PARM_DESC(shpchp_slot_with_bus, "Use bus number in the slot name");
 
 #define SHPC_MODULE_NAME "shpchp"
 
@@ -99,23 +96,13 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
 	kfree(slot);
 }
 
-static void make_slot_name(struct slot *slot)
-{
-	if (shpchp_slot_with_bus)
-		snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d",
-			 slot->bus, slot->number);
-	else
-		snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d",
-			 slot->number);
-}
-
 static int init_slots(struct controller *ctrl)
 {
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
 	int retval = -ENOMEM;
-	int i;
+	int i, len, dup = 1;
 
 	for (i = 0; i < ctrl->num_slots; i++) {
 		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
@@ -146,7 +133,7 @@ static int init_slots(struct controller *ctrl)
 		/* register this slot with the hotplug pci core */
 		hotplug_slot->private = slot;
 		hotplug_slot->release = &release_slot;
-		make_slot_name(slot);
+		snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
 		hotplug_slot->ops = &shpchp_hotplug_slot_ops;
 
 		get_power_status(hotplug_slot, &info->power_status);
@@ -157,14 +144,23 @@ static int init_slots(struct controller *ctrl)
 		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
 		    "slot_device_offset=%x\n", slot->bus, slot->device,
 		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
+duplicate_name:
 		retval = pci_hp_register(slot->hotplug_slot,
 				ctrl->pci_dev->subordinate, slot->device);
 		if (retval) {
+			/*
+			 * If slot N already exists, we'll try to create
+			 * slot N-1, N-2 ... N-M, until we overflow.
+			 */
+			if (retval == -EEXIST) {
+				len = snprintf(slot->name, SLOT_NAME_SIZE,
+					       "%d-%d", slot->number, dup++);
+				if (len < SLOT_NAME_SIZE)
+					goto duplicate_name;
+				else
+					err("duplicate slot name overflow\n");
+			}
 			err("pci_hp_register failed with error %d\n", retval);
-			if (retval == -EEXIST)
-				err("Failed to register slot because of name "
-                                    "collision. Try \'shpchp_slot_with_bus\' "
-				    "module option.\n");
 			goto error_info;
 		}
 
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 8d0e60ac849..c3edcdc08e7 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -2348,11 +2348,34 @@ static void __init iommu_exit_mempool(void)
 
 }
 
+static int blacklist_iommu(const struct dmi_system_id *id)
+{
+	printk(KERN_INFO "%s detected; disabling IOMMU\n",
+	       id->ident);
+	dmar_disabled = 1;
+	return 0;
+}
+
+static struct dmi_system_id __initdata intel_iommu_dmi_table[] = {
+	{	/* Some DG33BU BIOS revisions advertised non-existent VT-d */
+		.callback = blacklist_iommu,
+		.ident = "Intel DG33BU",
+		{	DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "DG33BU"),
+		}
+	},
+	{ }
+};
+
+
 void __init detect_intel_iommu(void)
 {
 	if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
 		return;
 	if (early_dmar_detect()) {
+		dmi_check_system(intel_iommu_dmi_table);
+		if (dmar_disabled)
+			return;
 		iommu_detected = 1;
 	}
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 18354817173..4a10b5624f7 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -308,9 +308,8 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 				  entry->msi_attrib.masked);
 
 	pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
-	control &= ~(PCI_MSI_FLAGS_QSIZE | PCI_MSI_FLAGS_ENABLE);
-	if (entry->msi_attrib.maskbit || !entry->msi_attrib.masked)
-		control |= PCI_MSI_FLAGS_ENABLE;
+	control &= ~PCI_MSI_FLAGS_QSIZE;
+	control |= PCI_MSI_FLAGS_ENABLE;
 	pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
 }
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 0a3d856833f..c9884bba22d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1060,7 +1060,7 @@ bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
  * The caller must verify that the device is capable of generating PME# before
  * calling this function with @enable equal to 'true'.
  */
-static void pci_pme_active(struct pci_dev *dev, bool enable)
+void pci_pme_active(struct pci_dev *dev, bool enable)
 {
 	u16 pmcsr;
 
@@ -1941,6 +1941,7 @@ EXPORT_SYMBOL(pci_set_power_state);
 EXPORT_SYMBOL(pci_save_state);
 EXPORT_SYMBOL(pci_restore_state);
 EXPORT_SYMBOL(pci_pme_capable);
+EXPORT_SYMBOL(pci_pme_active);
 EXPORT_SYMBOL(pci_enable_wake);
 EXPORT_SYMBOL(pci_target_state);
 EXPORT_SYMBOL(pci_prepare_to_sleep);
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
index 30f581b8791..6dd7b13e980 100644
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -36,12 +36,7 @@ int aer_osc_setup(struct pcie_device *pciedev)
 	if (acpi_pci_disabled)
 		return -1;
 
-	/* Find root host bridge */
-	while (pdev->bus->self)
-		pdev = pdev->bus->self;
-	handle = acpi_get_pci_rootbridge_handle(
-		pci_domain_nr(pdev->bus), pdev->bus->number);
-
+	handle = acpi_find_root_bridge_handle(pdev);
 	if (handle) {
 		pcie_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
 		status = pci_osc_control_set(handle,
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 7098dfb0744..36698e57b97 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -52,27 +52,49 @@ EXPORT_SYMBOL(no_pci_devices);
  * Some platforms allow access to legacy I/O port and ISA memory space on
  * a per-bus basis.  This routine creates the files and ties them into
  * their associated read, write and mmap files from pci-sysfs.c
+ *
+ * On error unwind, but don't propogate the error to the caller
+ * as it is ok to set up the PCI bus without these files.
  */
 static void pci_create_legacy_files(struct pci_bus *b)
 {
+	int error;
+
 	b->legacy_io = kzalloc(sizeof(struct bin_attribute) * 2,
 			       GFP_ATOMIC);
-	if (b->legacy_io) {
-		b->legacy_io->attr.name = "legacy_io";
-		b->legacy_io->size = 0xffff;
-		b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
-		b->legacy_io->read = pci_read_legacy_io;
-		b->legacy_io->write = pci_write_legacy_io;
-		device_create_bin_file(&b->dev, b->legacy_io);
-
-		/* Allocated above after the legacy_io struct */
-		b->legacy_mem = b->legacy_io + 1;
-		b->legacy_mem->attr.name = "legacy_mem";
-		b->legacy_mem->size = 1024*1024;
-		b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
-		b->legacy_mem->mmap = pci_mmap_legacy_mem;
-		device_create_bin_file(&b->dev, b->legacy_mem);
-	}
+	if (!b->legacy_io)
+		goto kzalloc_err;
+
+	b->legacy_io->attr.name = "legacy_io";
+	b->legacy_io->size = 0xffff;
+	b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
+	b->legacy_io->read = pci_read_legacy_io;
+	b->legacy_io->write = pci_write_legacy_io;
+	error = device_create_bin_file(&b->dev, b->legacy_io);
+	if (error)
+		goto legacy_io_err;
+
+	/* Allocated above after the legacy_io struct */
+	b->legacy_mem = b->legacy_io + 1;
+	b->legacy_mem->attr.name = "legacy_mem";
+	b->legacy_mem->size = 1024*1024;
+	b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
+	b->legacy_mem->mmap = pci_mmap_legacy_mem;
+	error = device_create_bin_file(&b->dev, b->legacy_mem);
+	if (error)
+		goto legacy_mem_err;
+
+	return;
+
+legacy_mem_err:
+	device_remove_bin_file(&b->dev, b->legacy_io);
+legacy_io_err:
+	kfree(b->legacy_io);
+	b->legacy_io = NULL;
+kzalloc_err:
+	printk(KERN_WARNING "pci: warning: could not create legacy I/O port "
+	       "and ISA memory resources to sysfs\n");
+	return;
 }
 
 void pci_remove_legacy_files(struct pci_bus *b)
@@ -282,6 +304,9 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 		} else {
 			res->start = l64;
 			res->end = l64 + sz64;
+			printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
+				pci_name(dev), pos, (unsigned long long)res->start,
+				(unsigned long long)res->end);
 		}
 	} else {
 		sz = pci_size(l, sz, mask);
@@ -291,6 +316,9 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 
 		res->start = l;
 		res->end = l + sz;
+		printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
+			pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
+			(unsigned long long)res->start, (unsigned long long)res->end);
 	}
 
  out:
@@ -361,6 +389,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
+		printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
+			pci_name(dev), (unsigned long long) res->start,
+			(unsigned long long) res->end);
 	}
 
 	res = child->resource[1];
@@ -372,6 +403,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
+		printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
+			pci_name(dev), (unsigned long long) res->start,
+			(unsigned long long) res->end);
 	}
 
 	res = child->resource[2];
@@ -407,6 +441,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		res->start = base;
 		res->end = limit + 0xfffff;
+		printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
+			pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
+			(unsigned long long) res->start, (unsigned long long) res->end);
 	}
 }
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 0fb36507428..9236e7f869c 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1756,9 +1756,14 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_c
  */
 static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
 {
-	/*  Only disable the VPD capability for 5706, 5708, and 5709 rev. A */
+	/*
+	 * Only disable the VPD capability for 5706, 5706S, 5708,
+	 * 5708S and 5709 rev. A
+	 */
 	if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
+	    (dev->device == PCI_DEVICE_ID_NX2_5706S) ||
 	    (dev->device == PCI_DEVICE_ID_NX2_5708) ||
+	    (dev->device == PCI_DEVICE_ID_NX2_5708S) ||
 	    ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
 	     (dev->revision & 0xf0) == 0x0)) {
 		if (dev->vpd)
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 217814fef4e..3b3b5f17879 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -280,6 +280,8 @@ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id,
 			      match_pci_dev_by_id);
 	if (dev)
 		pdev = to_pci_dev(dev);
+	if (from)
+		pci_dev_put(from);
 	return pdev;
 }
 
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 827c0a520e2..3abbfad9dda 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -352,11 +352,12 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long
 				continue;
 			r_size = r->end - r->start + 1;
 			/* For bridges size != alignment */
-			align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start;
+			align = resource_alignment(r);
 			order = __ffs(align) - 20;
 			if (order > 11) {
-				dev_warn(&dev->dev, "BAR %d too large: "
+				dev_warn(&dev->dev, "BAR %d bad alignment %llx: "
 				       "%#016llx-%#016llx\n", i,
+				       (unsigned long long)align,
 				       (unsigned long long)r->start,
 				       (unsigned long long)r->end);
 				r->flags = 0;
@@ -530,6 +531,40 @@ void __ref pci_bus_assign_resources(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pci_bus_assign_resources);
 
+static void pci_bus_dump_res(struct pci_bus *bus)
+{
+        int i;
+
+        for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+                struct resource *res = bus->resource[i];
+                if (!res)
+                        continue;
+
+		printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n",
+			bus->number, i,
+			(res->flags & IORESOURCE_IO) ? "io port" : "mmio",
+			(unsigned long long) res->start,
+			(unsigned long long) res->end);
+        }
+}
+
+static void pci_bus_dump_resources(struct pci_bus *bus)
+{
+	struct pci_bus *b;
+	struct pci_dev *dev;
+
+
+	pci_bus_dump_res(bus);
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		b = dev->subordinate;
+		if (!b)
+			continue;
+
+		pci_bus_dump_resources(b);
+	}
+}
+
 void __init
 pci_assign_unassigned_resources(void)
 {
@@ -545,4 +580,9 @@ pci_assign_unassigned_resources(void)
 		pci_bus_assign_resources(bus);
 		pci_enable_bridges(bus);
 	}
+
+	/* dump the resource on buses */
+	list_for_each_entry(bus, &pci_root_buses, node) {
+		pci_bus_dump_resources(bus);
+	}
 }
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 684968558c1..a0ffb8ebfe0 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -18,13 +18,13 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <asm/gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
 
 
 /*
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 569b746b573..f3736398900 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -19,12 +19,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
 
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index ccfdf1969a7..1b07af5a2ed 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -24,12 +24,12 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index bb95db7d2b7..bcff5cfed05 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -16,7 +16,7 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #include "soc_common.h"
 
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 881ec8a8e38..37ec55df086 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -21,11 +21,11 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 
 #include "sa1111_generic.h"
 
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 92d1cc33808..877001db491 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -21,12 +21,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
 
 #include "soc_common.h"
 
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index 4abde190c1f..e07b5c51ec5 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -16,19 +16,64 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/palmtx.h>
+#include <mach/gpio.h>
+#include <mach/palmtx.h>
 
 #include "soc_common.h"
 
 static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY);
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
+	if (ret)
+		goto err3;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
+	if (ret)
+		goto err3;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
+	if (ret)
+		goto err4;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
+	if (ret)
+		goto err4;
+	ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
+	if (ret)
+		goto err5;
+
+	skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
 	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+err4:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+err3:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+err2:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+err1:
+	return ret;
 }
 
 static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
 }
 
 static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
@@ -109,7 +154,7 @@ static void __exit palmtx_pcmcia_exit(void)
 	platform_device_unregister(palmtx_pcmcia_device);
 }
 
-fs_initcall(palmtx_pcmcia_init);
+module_init(palmtx_pcmcia_init);
 module_exit(palmtx_pcmcia_exit);
 
 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index d71f93d4583..1cd02f5a23a 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/hardware/scoop.h>
 
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index d0c1d63d189..203e579ebbd 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -275,7 +275,7 @@ static int readable(struct pcmcia_socket *s, struct resource *res,
 		destroy_cis_cache(s);
 	}
 	s->cis_mem.res = NULL;
-	if ((ret != 0) || (count == 0))
+	if ((ret != 0) || (*count == 0))
 		return 0;
 	return 1;
 }
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index ce133ce81c1..f424146a2bc 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -11,11 +11,11 @@
 #include <linux/device.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/signal.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "sa1100_generic.h"
 
diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c
index 607c3f326ec..1ca9737ea79 100644
--- a/drivers/pcmcia/sa1100_badge4.c
+++ b/drivers/pcmcia/sa1100_badge4.c
@@ -18,9 +18,9 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #include "sa1111_generic.h"
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index 7c3951a2675..63e6bc431a0 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -11,10 +11,10 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
-#include <asm/arch/cerf.h>
+#include <mach/cerf.h>
 #include "sa1100_generic.h"
 
 #define CERF_SOCKET	1
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index e5491879acd..6de4e1b41d6 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -11,10 +11,10 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
 
 #include "sa1100_generic.h"
 
diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
index 2167e6714d2..57ca085473d 100644
--- a/drivers/pcmcia/sa1100_jornada720.c
+++ b/drivers/pcmcia/sa1100_jornada720.c
@@ -10,7 +10,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index 687492fcd5b..4c41e86ccff 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -9,9 +9,9 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/neponset.h>
+#include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 
 #include "sa1111_generic.h"
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 494912fccc0..46d8c1977c2 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -9,9 +9,9 @@
 #include <linux/device.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/shannon.h>
+#include <mach/shannon.h>
 #include <asm/irq.h>
 #include "sa1100_generic.h"
 
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 42567de894b..33a08ae09fd 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -9,10 +9,10 @@
 #include <linux/device.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
 #include "sa1100_generic.h"
  
 extern long get_cs3_shadow(void);
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 658cddfbcf2..6924d0ea8d3 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -14,7 +14,7 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index 31a7abc55b2..7cb1273202c 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -37,7 +37,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 8c21446996f..da397215322 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -43,7 +43,7 @@
 #include <linux/spinlock.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
@@ -51,7 +51,7 @@
 
 /* FIXME: platform dependent resource declaration has to move out of this file */
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #endif
 
 #ifdef DEBUG
@@ -748,7 +748,9 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
 
 		add_timer(&skt->poll_timer);
 
-		device_create_file(&skt->socket.dev, &dev_attr_status);
+		ret = device_create_file(&skt->socket.dev, &dev_attr_status);
+		if (ret)
+			goto out_err_8;
 	}
 
 	dev_set_drvdata(dev, sinfo);
@@ -758,6 +760,8 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
 	do {
 		skt = &sinfo->skt[i];
 
+		device_remove_file(&skt->socket.dev, &dev_attr_status);
+ out_err_8:
 		del_timer_sync(&skt->poll_timer);
 		pcmcia_unregister_socket(&skt->socket);
 
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index d7e9f2152df..95015cbfd33 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -405,8 +405,6 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
 		extended_irq = &res->data.extended_irq;
-		if (extended_irq->producer_consumer == ACPI_PRODUCER)
-			return AE_OK;
 
 		if (extended_irq->interrupt_count == 0)
 			pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c
index bbf78ef4ba0..b42df162071 100644
--- a/drivers/pnp/support.c
+++ b/drivers/pnp/support.c
@@ -77,7 +77,7 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
 {
 #ifdef DEBUG
 	char buf[128];
-	int len = 0;
+	int len;
 	struct pnp_resource *pnp_res;
 	struct resource *res;
 
@@ -89,9 +89,10 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
 	dev_dbg(&dev->dev, "%s: current resources:\n", desc);
 	list_for_each_entry(pnp_res, &dev->resources, list) {
 		res = &pnp_res->res;
+		len = 0;
 
-		len += snprintf(buf + len, sizeof(buf) - len, "  %-3s ",
-				pnp_resource_type_name(res));
+		len += scnprintf(buf + len, sizeof(buf) - len, "  %-3s ",
+				 pnp_resource_type_name(res));
 
 		if (res->flags & IORESOURCE_DISABLED) {
 			dev_dbg(&dev->dev, "%sdisabled\n", buf);
@@ -101,18 +102,18 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
 		switch (pnp_resource_type(res)) {
 		case IORESOURCE_IO:
 		case IORESOURCE_MEM:
-			len += snprintf(buf + len, sizeof(buf) - len,
-					"%#llx-%#llx flags %#lx",
-					(unsigned long long) res->start,
-					(unsigned long long) res->end,
-					res->flags);
+			len += scnprintf(buf + len, sizeof(buf) - len,
+					 "%#llx-%#llx flags %#lx",
+					 (unsigned long long) res->start,
+					 (unsigned long long) res->end,
+					 res->flags);
 			break;
 		case IORESOURCE_IRQ:
 		case IORESOURCE_DMA:
-			len += snprintf(buf + len, sizeof(buf) - len,
-					"%lld flags %#lx",
-					(unsigned long long) res->start,
-					res->flags);
+			len += scnprintf(buf + len, sizeof(buf) - len,
+					 "%lld flags %#lx",
+					 (unsigned long long) res->start,
+					 res->flags);
 			break;
 		}
 		dev_dbg(&dev->dev, "%s\n", buf);
@@ -144,66 +145,67 @@ void dbg_pnp_show_option(struct pnp_dev *dev, struct pnp_option *option)
 	struct pnp_dma *dma;
 
 	if (pnp_option_is_dependent(option))
-		len += snprintf(buf + len, sizeof(buf) - len,
-				"  dependent set %d (%s) ",
-				pnp_option_set(option),
-				pnp_option_priority_name(option));
+		len += scnprintf(buf + len, sizeof(buf) - len,
+				 "  dependent set %d (%s) ",
+				 pnp_option_set(option),
+				 pnp_option_priority_name(option));
 	else
-		len += snprintf(buf + len, sizeof(buf) - len, "  independent ");
+		len += scnprintf(buf + len, sizeof(buf) - len,
+				 "  independent ");
 
 	switch (option->type) {
 	case IORESOURCE_IO:
 		port = &option->u.port;
-		len += snprintf(buf + len, sizeof(buf) - len, "io  min %#llx "
-				"max %#llx align %lld size %lld flags %#x",
-				(unsigned long long) port->min,
-				(unsigned long long) port->max,
-				(unsigned long long) port->align,
-				(unsigned long long) port->size, port->flags);
+		len += scnprintf(buf + len, sizeof(buf) - len, "io  min %#llx "
+				 "max %#llx align %lld size %lld flags %#x",
+				 (unsigned long long) port->min,
+				 (unsigned long long) port->max,
+				 (unsigned long long) port->align,
+				 (unsigned long long) port->size, port->flags);
 		break;
 	case IORESOURCE_MEM:
 		mem = &option->u.mem;
-		len += snprintf(buf + len, sizeof(buf) - len, "mem min %#llx "
-				"max %#llx align %lld size %lld flags %#x",
-				(unsigned long long) mem->min,
-				(unsigned long long) mem->max,
-				(unsigned long long) mem->align,
-				(unsigned long long) mem->size, mem->flags);
+		len += scnprintf(buf + len, sizeof(buf) - len, "mem min %#llx "
+				 "max %#llx align %lld size %lld flags %#x",
+				 (unsigned long long) mem->min,
+				 (unsigned long long) mem->max,
+				 (unsigned long long) mem->align,
+				 (unsigned long long) mem->size, mem->flags);
 		break;
 	case IORESOURCE_IRQ:
 		irq = &option->u.irq;
-		len += snprintf(buf + len, sizeof(buf) - len, "irq");
+		len += scnprintf(buf + len, sizeof(buf) - len, "irq");
 		if (bitmap_empty(irq->map.bits, PNP_IRQ_NR))
-			len += snprintf(buf + len, sizeof(buf) - len,
-					" <none>");
+			len += scnprintf(buf + len, sizeof(buf) - len,
+					 " <none>");
 		else {
 			for (i = 0; i < PNP_IRQ_NR; i++)
 				if (test_bit(i, irq->map.bits))
-					len += snprintf(buf + len,
-							sizeof(buf) - len,
-							" %d", i);
+					len += scnprintf(buf + len,
+							 sizeof(buf) - len,
+							 " %d", i);
 		}
-		len += snprintf(buf + len, sizeof(buf) - len, " flags %#x",
-				irq->flags);
+		len += scnprintf(buf + len, sizeof(buf) - len, " flags %#x",
+				 irq->flags);
 		if (irq->flags & IORESOURCE_IRQ_OPTIONAL)
-			len += snprintf(buf + len, sizeof(buf) - len,
-					" (optional)");
+			len += scnprintf(buf + len, sizeof(buf) - len,
+					 " (optional)");
 		break;
 	case IORESOURCE_DMA:
 		dma = &option->u.dma;
-		len += snprintf(buf + len, sizeof(buf) - len, "dma");
+		len += scnprintf(buf + len, sizeof(buf) - len, "dma");
 		if (!dma->map)
-			len += snprintf(buf + len, sizeof(buf) - len,
-					" <none>");
+			len += scnprintf(buf + len, sizeof(buf) - len,
+					 " <none>");
 		else {
 			for (i = 0; i < 8; i++)
 				if (dma->map & (1 << i))
-					len += snprintf(buf + len,
-							sizeof(buf) - len,
-							" %d", i);
+					len += scnprintf(buf + len,
+							 sizeof(buf) - len,
+							 " %d", i);
 		}
-		len += snprintf(buf + len, sizeof(buf) - len, " (bitmask %#x) "
-				"flags %#x", dma->map, dma->flags);
+		len += scnprintf(buf + len, sizeof(buf) - len, " (bitmask %#x) "
+				 "flags %#x", dma->map, dma->flags);
 		break;
 	}
 	dev_dbg(&dev->dev, "%s\n", buf);
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 4d17d384578..9ce55850271 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -49,6 +49,13 @@ config BATTERY_OLPC
 	help
 	  Say Y to enable support for the battery on the OLPC laptop.
 
+config BATTERY_TOSA
+	tristate "Sharp SL-6000 (tosa) battery"
+	depends on MACH_TOSA && MFD_TC6393XB
+	help
+	  Say Y to enable support for the battery on the Sharp Zaurus
+	  SL-6000 (tosa) models.
+
 config BATTERY_PALMTX
 	tristate "Palm T|X battery"
 	depends on MACH_PALMTX
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 6f43a54ee42..4706bf8ff45 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
+obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
 obj-$(CONFIG_BATTERY_PALMTX)	+= palmtx_battery.o
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index ab1e8289f07..32570af3c5c 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -19,7 +19,7 @@
 
 #define EC_BAT_VOLTAGE	0x10	/* uint16_t,	*9.76/32,    mV   */
 #define EC_BAT_CURRENT	0x11	/* int16_t,	*15.625/120, mA   */
-#define EC_BAT_ACR	0x12
+#define EC_BAT_ACR	0x12	/* int16_t,	*6250/15,    µAh  */
 #define EC_BAT_TEMP	0x13	/* uint16_t,	*100/256,   °C  */
 #define EC_AMB_TEMP	0x14	/* uint16_t,	*100/256,   °C  */
 #define EC_BAT_STATUS	0x15	/* uint8_t,	bitmask */
@@ -84,6 +84,119 @@ static struct power_supply olpc_ac = {
 	.get_property = olpc_ac_get_prop,
 };
 
+static char bat_serial[17]; /* Ick */
+
+static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
+{
+	if (olpc_platform_info.ecver > 0x44) {
+		if (ec_byte & BAT_STAT_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (ec_byte & BAT_STAT_DISCHARGING)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else /* er,... */
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		/* Older EC didn't report charge/discharge bits */
+		if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else /* Not _necessarily_ true but EC doesn't tell all yet */
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+	}
+
+	return 0;
+}
+
+static int olpc_bat_get_health(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte) {
+	case 0:
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+
+	case BAT_ERR_OVERTEMP:
+		val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		break;
+
+	case BAT_ERR_OVERVOLTAGE:
+		val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		break;
+
+	case BAT_ERR_INFOFAIL:
+	case BAT_ERR_OUT_OF_CONTROL:
+	case BAT_ERR_ID_FAIL:
+	case BAT_ERR_ACR_FAIL:
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+
+	default:
+		/* Eep. We don't know this failure code */
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_mfr(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte >> 4) {
+	case 1:
+		val->strval = "Gold Peak";
+		break;
+	case 2:
+		val->strval = "BYD";
+		break;
+	default:
+		val->strval = "Unknown";
+		break;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_tech(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte & 0xf) {
+	case 1:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+		break;
+	case 2:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		break;
+	}
+
+	return ret;
+}
+
 /*********************************************************************
  *		Battery properties
  *********************************************************************/
@@ -94,6 +207,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 	int ret = 0;
 	int16_t ec_word;
 	uint8_t ec_byte;
+	uint64_t ser_buf;
 
 	ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
 	if (ret)
@@ -110,25 +224,10 @@ static int olpc_bat_get_property(struct power_supply *psy,
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
-		if (olpc_platform_info.ecver > 0x44) {
-			if (ec_byte & BAT_STAT_CHARGING)
-				val->intval = POWER_SUPPLY_STATUS_CHARGING;
-			else if (ec_byte & BAT_STAT_DISCHARGING)
-				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-			else if (ec_byte & BAT_STAT_FULL)
-				val->intval = POWER_SUPPLY_STATUS_FULL;
-			else /* er,... */
-				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-		} else {
-			/* Older EC didn't report charge/discharge bits */
-			if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
-				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-			else if (ec_byte & BAT_STAT_FULL)
-				val->intval = POWER_SUPPLY_STATUS_FULL;
-			else /* Not _necessarily_ true but EC doesn't tell all yet */
-				val->intval = POWER_SUPPLY_STATUS_CHARGING;
-			break;
-		}
+		ret = olpc_bat_get_status(val, ec_byte);
+		if (ret)
+			return ret;
+		break;
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = !!(ec_byte & BAT_STAT_PRESENT);
 		break;
@@ -137,72 +236,21 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		if (ec_byte & BAT_STAT_DESTROY)
 			val->intval = POWER_SUPPLY_HEALTH_DEAD;
 		else {
-			ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+			ret = olpc_bat_get_health(val);
 			if (ret)
 				return ret;
-
-			switch (ec_byte) {
-			case 0:
-				val->intval = POWER_SUPPLY_HEALTH_GOOD;
-				break;
-
-			case BAT_ERR_OVERTEMP:
-				val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
-				break;
-
-			case BAT_ERR_OVERVOLTAGE:
-				val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
-				break;
-
-			case BAT_ERR_INFOFAIL:
-			case BAT_ERR_OUT_OF_CONTROL:
-			case BAT_ERR_ID_FAIL:
-			case BAT_ERR_ACR_FAIL:
-				val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
-				break;
-
-			default:
-				/* Eep. We don't know this failure code */
-				return -EIO;
-			}
 		}
 		break;
 
 	case POWER_SUPPLY_PROP_MANUFACTURER:
-		ec_byte = BAT_ADDR_MFR_TYPE;
-		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+		ret = olpc_bat_get_mfr(val);
 		if (ret)
 			return ret;
-
-		switch (ec_byte >> 4) {
-		case 1:
-			val->strval = "Gold Peak";
-			break;
-		case 2:
-			val->strval = "BYD";
-			break;
-		default:
-			val->strval = "Unknown";
-			break;
-		}
 		break;
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
-		ec_byte = BAT_ADDR_MFR_TYPE;
-		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+		ret = olpc_bat_get_tech(val);
 		if (ret)
 			return ret;
-
-		switch (ec_byte & 0xf) {
-		case 1:
-			val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
-			break;
-		case 2:
-			val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
-			break;
-		default:
-			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
-			break;
-		}
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
 		ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
@@ -241,6 +289,22 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		ec_word = be16_to_cpu(ec_word);
 		val->intval = ec_word * 100 / 256;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		ec_word = be16_to_cpu(ec_word);
+		val->intval = ec_word * 6250 / 15;
+		break;
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
+		if (ret)
+			return ret;
+
+		sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
+		val->strval = bat_serial;
+		break;
 	default:
 		ret = -EINVAL;
 		break;
@@ -260,6 +324,50 @@ static enum power_supply_property olpc_bat_props[] = {
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TEMP_AMBIENT,
 	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+};
+
+/* EEPROM reading goes completely around the power_supply API, sadly */
+
+#define EEPROM_START	0x20
+#define EEPROM_END	0x80
+#define EEPROM_SIZE	(EEPROM_END - EEPROM_START)
+
+static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+	uint8_t ec_byte;
+	int ret, end;
+
+	if (off >= EEPROM_SIZE)
+		return 0;
+	if (off + count > EEPROM_SIZE)
+		count = EEPROM_SIZE - off;
+
+	end = EEPROM_START + off + count;
+	for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
+		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
+				&buf[ec_byte - EEPROM_START], 1);
+		if (ret) {
+			printk(KERN_ERR "olpc-battery:  EC command "
+					"EC_BAT_EEPROM @ 0x%x failed -"
+					" %d!\n", ec_byte, ret);
+			return -EIO;
+		}
+	}
+
+	return count;
+}
+
+static struct bin_attribute olpc_bat_eeprom = {
+	.attr = {
+		.name = "eeprom",
+		.mode = S_IRUGO,
+		.owner = THIS_MODULE,
+	},
+	.size = 0,
+	.read = olpc_bat_eeprom_read,
 };
 
 /*********************************************************************
@@ -290,8 +398,14 @@ static int __init olpc_bat_init(void)
 
 	if (!olpc_platform_info.ecver)
 		return -ENXIO;
-	if (olpc_platform_info.ecver < 0x43) {
-		printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
+
+	/*
+	 * We've seen a number of EC protocol changes; this driver requires
+	 * the latest EC protocol, supported by 0x44 and above.
+	 */
+	if (olpc_platform_info.ecver < 0x44) {
+		printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
+			"battery driver.\n", olpc_platform_info.ecver);
 		return -ENXIO;
 	}
 
@@ -315,8 +429,14 @@ static int __init olpc_bat_init(void)
 	if (ret)
 		goto battery_failed;
 
+	ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
+	if (ret)
+		goto eeprom_failed;
+
 	goto success;
 
+eeprom_failed:
+	power_supply_unregister(&olpc_bat);
 battery_failed:
 	power_supply_unregister(&olpc_ac);
 ac_failed:
@@ -327,6 +447,7 @@ success:
 
 static void __exit olpc_bat_exit(void)
 {
+	device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
 	power_supply_unregister(&olpc_bat);
 	power_supply_unregister(&olpc_ac);
 	platform_device_unregister(bat_pdev);
diff --git a/drivers/power/palmtx_battery.c b/drivers/power/palmtx_battery.c
index 244bb273a63..7035bfa41c6 100644
--- a/drivers/power/palmtx_battery.c
+++ b/drivers/power/palmtx_battery.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/palmtx.h>
+#include <mach/palmtx.h>
 
 static DEFINE_MUTEX(bat_lock);
 static struct work_struct bat_work;
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 49215da5249..fe2aeb11939 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(charge_empty),
 	POWER_SUPPLY_ATTR(charge_now),
 	POWER_SUPPLY_ATTR(charge_avg),
+	POWER_SUPPLY_ATTR(charge_counter),
 	POWER_SUPPLY_ATTR(energy_full_design),
 	POWER_SUPPLY_ATTR(energy_empty_design),
 	POWER_SUPPLY_ATTR(energy_full),
diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
new file mode 100644
index 00000000000..2eab35aab31
--- /dev/null
+++ b/drivers/power/tosa_battery.c
@@ -0,0 +1,486 @@
+/*
+ * Battery and Power Management code for the Sharp SL-6000x
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <mach/tosa.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+
+struct tosa_bat {
+	int status;
+	struct power_supply psy;
+	int full_chrg;
+
+	struct mutex work_lock; /* protects data */
+
+	bool (*is_present)(struct tosa_bat *bat);
+	int gpio_full;
+	int gpio_charge_off;
+
+	int technology;
+
+	int gpio_bat;
+	int adc_bat;
+	int adc_bat_divider;
+	int bat_max;
+	int bat_min;
+
+	int gpio_temp;
+	int adc_temp;
+	int adc_temp_divider;
+};
+
+static struct tosa_bat tosa_bat_main;
+static struct tosa_bat tosa_bat_jacket;
+
+static unsigned long tosa_read_bat(struct tosa_bat *bat)
+{
+	unsigned long value = 0;
+
+	if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+		return 0;
+
+	mutex_lock(&bat_lock);
+	gpio_set_value(bat->gpio_bat, 1);
+	msleep(5);
+	value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+			bat->adc_bat);
+	gpio_set_value(bat->gpio_bat, 0);
+	mutex_unlock(&bat_lock);
+
+	value = value * 1000000 / bat->adc_bat_divider;
+
+	return value;
+}
+
+static unsigned long tosa_read_temp(struct tosa_bat *bat)
+{
+	unsigned long value = 0;
+
+	if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+		return 0;
+
+	mutex_lock(&bat_lock);
+	gpio_set_value(bat->gpio_temp, 1);
+	msleep(5);
+	value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+			bat->adc_temp);
+	gpio_set_value(bat->gpio_temp, 0);
+	mutex_unlock(&bat_lock);
+
+	value = value * 10000 / bat->adc_temp_divider;
+
+	return value;
+}
+
+static int tosa_bat_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	int ret = 0;
+	struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
+
+	if (bat->is_present && !bat->is_present(bat)
+			&& psp != POWER_SUPPLY_PROP_PRESENT) {
+		return -ENODEV;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat->status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = bat->technology;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = tosa_read_bat(bat);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		if (bat->full_chrg == -1)
+			val->intval = bat->bat_max;
+		else
+			val->intval = bat->full_chrg;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = bat->bat_max;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = bat->bat_min;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = tosa_read_temp(bat);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = bat->is_present ? bat->is_present(bat) : 1;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
+{
+	return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
+}
+
+static void tosa_bat_external_power_changed(struct power_supply *psy)
+{
+	schedule_work(&bat_work);
+}
+
+static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
+{
+	pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+	schedule_work(&bat_work);
+	return IRQ_HANDLED;
+}
+
+static void tosa_bat_update(struct tosa_bat *bat)
+{
+	int old;
+	struct power_supply *psy = &bat->psy;
+
+	mutex_lock(&bat->work_lock);
+
+	old = bat->status;
+
+	if (bat->is_present && !bat->is_present(bat)) {
+		printk(KERN_NOTICE "%s not present\n", psy->name);
+		bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+		bat->full_chrg = -1;
+	} else if (power_supply_am_i_supplied(psy)) {
+		if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+			gpio_set_value(bat->gpio_charge_off, 0);
+			mdelay(15);
+		}
+
+		if (gpio_get_value(bat->gpio_full)) {
+			if (old == POWER_SUPPLY_STATUS_CHARGING ||
+					bat->full_chrg == -1)
+				bat->full_chrg = tosa_read_bat(bat);
+
+			gpio_set_value(bat->gpio_charge_off, 1);
+			bat->status = POWER_SUPPLY_STATUS_FULL;
+		} else {
+			gpio_set_value(bat->gpio_charge_off, 0);
+			bat->status = POWER_SUPPLY_STATUS_CHARGING;
+		}
+	} else {
+		gpio_set_value(bat->gpio_charge_off, 1);
+		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	if (old != bat->status)
+		power_supply_changed(psy);
+
+	mutex_unlock(&bat->work_lock);
+}
+
+static void tosa_bat_work(struct work_struct *work)
+{
+	tosa_bat_update(&tosa_bat_main);
+	tosa_bat_update(&tosa_bat_jacket);
+}
+
+
+static enum power_supply_property tosa_bat_main_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static enum power_supply_property tosa_bat_bu_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static struct tosa_bat tosa_bat_main = {
+	.status = POWER_SUPPLY_STATUS_DISCHARGING,
+	.full_chrg = -1,
+	.psy = {
+		.name		= "main-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= tosa_bat_main_props,
+		.num_properties	= ARRAY_SIZE(tosa_bat_main_props),
+		.get_property	= tosa_bat_get_property,
+		.external_power_changed = tosa_bat_external_power_changed,
+		.use_for_apm	= 1,
+	},
+
+	.gpio_full = TOSA_GPIO_BAT0_CRG,
+	.gpio_charge_off = TOSA_GPIO_CHARGE_OFF,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+	.gpio_bat = TOSA_GPIO_BAT0_V_ON,
+	.adc_bat = WM97XX_AUX_ID3,
+	.adc_bat_divider = 414,
+	.bat_max = 4310000,
+	.bat_min = 1551 * 1000000 / 414,
+
+	.gpio_temp = TOSA_GPIO_BAT1_TH_ON,
+	.adc_temp = WM97XX_AUX_ID2,
+	.adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_jacket = {
+	.status = POWER_SUPPLY_STATUS_DISCHARGING,
+	.full_chrg = -1,
+	.psy = {
+		.name		= "jacket-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= tosa_bat_main_props,
+		.num_properties	= ARRAY_SIZE(tosa_bat_main_props),
+		.get_property	= tosa_bat_get_property,
+		.external_power_changed = tosa_bat_external_power_changed,
+	},
+
+	.is_present = tosa_jacket_bat_is_present,
+	.gpio_full = TOSA_GPIO_BAT1_CRG,
+	.gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+	.gpio_bat = TOSA_GPIO_BAT1_V_ON,
+	.adc_bat = WM97XX_AUX_ID3,
+	.adc_bat_divider = 414,
+	.bat_max = 4310000,
+	.bat_min = 1551 * 1000000 / 414,
+
+	.gpio_temp = TOSA_GPIO_BAT0_TH_ON,
+	.adc_temp = WM97XX_AUX_ID2,
+	.adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_bu = {
+	.status = POWER_SUPPLY_STATUS_UNKNOWN,
+	.full_chrg = -1,
+
+	.psy = {
+		.name		= "backup-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= tosa_bat_bu_props,
+		.num_properties	= ARRAY_SIZE(tosa_bat_bu_props),
+		.get_property	= tosa_bat_get_property,
+		.external_power_changed = tosa_bat_external_power_changed,
+	},
+
+	.gpio_full = -1,
+	.gpio_charge_off = -1,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+	.gpio_bat = TOSA_GPIO_BU_CHRG_ON,
+	.adc_bat = WM97XX_AUX_ID4,
+	.adc_bat_divider = 1266,
+
+	.gpio_temp = -1,
+	.adc_temp = -1,
+	.adc_temp_divider = -1,
+};
+
+static struct {
+	int gpio;
+	char *name;
+	bool output;
+	int value;
+} gpios[] = {
+	{ TOSA_GPIO_CHARGE_OFF,		"main charge off",	1, 1 },
+	{ TOSA_GPIO_CHARGE_OFF_JC,	"jacket charge off",	1, 1 },
+	{ TOSA_GPIO_BAT_SW_ON,		"battery switch",	1, 0 },
+	{ TOSA_GPIO_BAT0_V_ON,		"main battery",		1, 0 },
+	{ TOSA_GPIO_BAT1_V_ON,		"jacket battery",	1, 0 },
+	{ TOSA_GPIO_BAT1_TH_ON,		"main battery temp",	1, 0 },
+	{ TOSA_GPIO_BAT0_TH_ON,		"jacket battery temp",	1, 0 },
+	{ TOSA_GPIO_BU_CHRG_ON,		"backup battery",	1, 0 },
+	{ TOSA_GPIO_BAT0_CRG,		"main battery full",	0, 0 },
+	{ TOSA_GPIO_BAT1_CRG,		"jacket battery full",	0, 0 },
+	{ TOSA_GPIO_BAT0_LOW,		"main battery low",	0, 0 },
+	{ TOSA_GPIO_BAT1_LOW,		"jacket battery low",	0, 0 },
+	{ TOSA_GPIO_JACKET_DETECT,	"jacket detect",	0, 0 },
+};
+
+#ifdef CONFIG_PM
+static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+	/* flush all pending status updates */
+	flush_scheduled_work();
+	return 0;
+}
+
+static int tosa_bat_resume(struct platform_device *dev)
+{
+	/* things may have changed while we were away */
+	schedule_work(&bat_work);
+	return 0;
+}
+#else
+#define tosa_bat_suspend NULL
+#define tosa_bat_resume NULL
+#endif
+
+static int __devinit tosa_bat_probe(struct platform_device *dev)
+{
+	int ret;
+	int i;
+
+	if (!machine_is_tosa())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		ret = gpio_request(gpios[i].gpio, gpios[i].name);
+		if (ret) {
+			i--;
+			goto err_gpio;
+		}
+
+		if (gpios[i].output)
+			ret = gpio_direction_output(gpios[i].gpio,
+					gpios[i].value);
+		else
+			ret = gpio_direction_input(gpios[i].gpio);
+
+		if (ret)
+			goto err_gpio;
+	}
+
+	mutex_init(&tosa_bat_main.work_lock);
+	mutex_init(&tosa_bat_jacket.work_lock);
+
+	INIT_WORK(&bat_work, tosa_bat_work);
+
+	ret = power_supply_register(&dev->dev, &tosa_bat_main.psy);
+	if (ret)
+		goto err_psy_reg_main;
+	ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy);
+	if (ret)
+		goto err_psy_reg_jacket;
+	ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy);
+	if (ret)
+		goto err_psy_reg_bu;
+
+	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"main full", &tosa_bat_main);
+	if (ret)
+		goto err_req_main;
+
+	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"jacket full", &tosa_bat_jacket);
+	if (ret)
+		goto err_req_jacket;
+
+	ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"jacket detect", &tosa_bat_jacket);
+	if (!ret) {
+		schedule_work(&bat_work);
+		return 0;
+	}
+
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+err_req_jacket:
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+err_req_main:
+	power_supply_unregister(&tosa_bat_bu.psy);
+err_psy_reg_bu:
+	power_supply_unregister(&tosa_bat_jacket.psy);
+err_psy_reg_jacket:
+	power_supply_unregister(&tosa_bat_main.psy);
+err_psy_reg_main:
+
+	/* see comment in tosa_bat_remove */
+	flush_scheduled_work();
+
+	i--;
+err_gpio:
+	for (; i >= 0; i--)
+		gpio_free(gpios[i].gpio);
+
+	return ret;
+}
+
+static int __devexit tosa_bat_remove(struct platform_device *dev)
+{
+	int i;
+
+	free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+
+	power_supply_unregister(&tosa_bat_bu.psy);
+	power_supply_unregister(&tosa_bat_jacket.psy);
+	power_supply_unregister(&tosa_bat_main.psy);
+
+	/*
+	 * now flush all pending work.
+	 * we won't get any more schedules, since all
+	 * sources (isr and external_power_changed)
+	 * are unregistered now.
+	 */
+	flush_scheduled_work();
+
+	for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
+		gpio_free(gpios[i].gpio);
+
+	return 0;
+}
+
+static struct platform_driver tosa_bat_driver = {
+	.driver.name	= "wm97xx-battery",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tosa_bat_probe,
+	.remove		= __devexit_p(tosa_bat_remove),
+	.suspend	= tosa_bat_suspend,
+	.resume		= tosa_bat_resume,
+};
+
+static int __init tosa_bat_init(void)
+{
+	return platform_driver_register(&tosa_bat_driver);
+}
+
+static void __exit tosa_bat_exit(void)
+{
+	platform_driver_unregister(&tosa_bat_driver);
+}
+
+module_init(tosa_bat_init);
+module_exit(tosa_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Tosa battery driver");
+MODULE_ALIAS("platform:wm97xx-battery");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
new file mode 100644
index 00000000000..a656128f1fd
--- /dev/null
+++ b/drivers/regulator/Kconfig
@@ -0,0 +1,59 @@
+menu "Voltage and Current regulators"
+
+config REGULATOR
+	bool "Voltage and Current Regulator Support"
+	default n
+	help
+	  Generic Voltage and Current Regulator support.
+
+	  This framework is designed to provide a generic interface to voltage
+	  and current regulators within the Linux kernel. It's intended to
+	  provide voltage and current control to client or consumer drivers and
+	  also provide status information to user space applications through a
+	  sysfs interface.
+
+	  The intention is to allow systems to dynamically control regulator
+	  output in order to save power and prolong battery life. This applies
+	  to both voltage regulators (where voltage output is controllable) and
+	  current sinks (where current output is controllable).
+
+	  This framework safely compiles out if not selected so that client
+	  drivers can still be used in systems with no software controllable
+	  regulators.
+
+	  If unsure, say no.
+
+config REGULATOR_DEBUG
+	bool "Regulator debug support"
+	depends on REGULATOR
+	help
+	  Say yes here to enable debugging support.
+
+config REGULATOR_FIXED_VOLTAGE
+	tristate
+	default n
+	select REGULATOR
+
+config REGULATOR_VIRTUAL_CONSUMER
+	tristate "Virtual regulator consumer support"
+	default n
+	select REGULATOR
+	help
+	  This driver provides a virtual consumer for the voltage and
+          current regulator API which provides sysfs controls for
+          configuring the supplies requested.  This is mainly useful
+          for test purposes.
+
+          If unsure, say no.
+
+config REGULATOR_BQ24022
+	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
+	default n
+	select REGULATOR
+	help
+	  This driver controls a TI bq24022 Charger attached via
+	  GPIOs. The provided current regulator can enable/disable
+	  charging select between 100 mA and 500 mA charging current
+	  limit.
+
+endmenu
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
new file mode 100644
index 00000000000..ac2c64efe65
--- /dev/null
+++ b/drivers/regulator/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for regulator drivers.
+#
+
+
+obj-$(CONFIG_REGULATOR) += core.o
+obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
+obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
+
+obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
+
+ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
new file mode 100644
index 00000000000..263699d6152
--- /dev/null
+++ b/drivers/regulator/bq24022.c
@@ -0,0 +1,167 @@
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/driver.h>
+
+static int bq24022_set_current_limit(struct regulator_dev *rdev,
+					int min_uA, int max_uA)
+{
+	struct platform_device *pdev = rdev_get_drvdata(rdev);
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+	dev_dbg(&pdev->dev, "setting current limit to %s mA\n",
+		max_uA >= 500000 ? "500" : "100");
+
+	/* REVISIT: maybe return error if min_uA != 0 ? */
+	gpio_set_value(pdata->gpio_iset2, max_uA >= 500000);
+	return 0;
+}
+
+static int bq24022_get_current_limit(struct regulator_dev *rdev)
+{
+	struct platform_device *pdev = rdev_get_drvdata(rdev);
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+	return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000;
+}
+
+static int bq24022_enable(struct regulator_dev *rdev)
+{
+	struct platform_device *pdev = rdev_get_drvdata(rdev);
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+	dev_dbg(&pdev->dev, "enabling charger\n");
+
+	gpio_set_value(pdata->gpio_nce, 0);
+	return 0;
+}
+
+static int bq24022_disable(struct regulator_dev *rdev)
+{
+	struct platform_device *pdev = rdev_get_drvdata(rdev);
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+	dev_dbg(&pdev->dev, "disabling charger\n");
+
+	gpio_set_value(pdata->gpio_nce, 1);
+	return 0;
+}
+
+static int bq24022_is_enabled(struct regulator_dev *rdev)
+{
+	struct platform_device *pdev = rdev_get_drvdata(rdev);
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+	return !gpio_get_value(pdata->gpio_nce);
+}
+
+static struct regulator_ops bq24022_ops = {
+	.set_current_limit = bq24022_set_current_limit,
+	.get_current_limit = bq24022_get_current_limit,
+	.enable            = bq24022_enable,
+	.disable           = bq24022_disable,
+	.is_enabled        = bq24022_is_enabled,
+};
+
+static struct regulator_desc bq24022_desc = {
+	.name  = "bq24022",
+	.ops   = &bq24022_ops,
+	.type  = REGULATOR_CURRENT,
+};
+
+static int __init bq24022_probe(struct platform_device *pdev)
+{
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+	struct regulator_dev *bq24022;
+	int ret;
+
+	if (!pdata || !pdata->gpio_nce || !pdata->gpio_iset2)
+		return -EINVAL;
+
+	ret = gpio_request(pdata->gpio_nce, "ncharge_en");
+	if (ret) {
+		dev_dbg(&pdev->dev, "couldn't request nCE GPIO: %d\n",
+			pdata->gpio_nce);
+		goto err_ce;
+	}
+	ret = gpio_request(pdata->gpio_iset2, "charge_mode");
+	if (ret) {
+		dev_dbg(&pdev->dev, "couldn't request ISET2 GPIO: %d\n",
+			pdata->gpio_iset2);
+		goto err_iset2;
+	}
+	ret = gpio_direction_output(pdata->gpio_iset2, 0);
+	ret = gpio_direction_output(pdata->gpio_nce, 1);
+
+	bq24022 = regulator_register(&bq24022_desc, pdev);
+	if (IS_ERR(bq24022)) {
+		dev_dbg(&pdev->dev, "couldn't register regulator\n");
+		ret = PTR_ERR(bq24022);
+		goto err_reg;
+	}
+	platform_set_drvdata(pdev, bq24022);
+	dev_dbg(&pdev->dev, "registered regulator\n");
+
+	return 0;
+err_reg:
+	gpio_free(pdata->gpio_iset2);
+err_iset2:
+	gpio_free(pdata->gpio_nce);
+err_ce:
+	return ret;
+}
+
+static int __devexit bq24022_remove(struct platform_device *pdev)
+{
+	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+	struct regulator_dev *bq24022 = platform_get_drvdata(pdev);
+
+	regulator_unregister(bq24022);
+	gpio_free(pdata->gpio_iset2);
+	gpio_free(pdata->gpio_nce);
+
+	return 0;
+}
+
+static struct platform_driver bq24022_driver = {
+	.driver = {
+		.name = "bq24022",
+	},
+	.remove = __devexit_p(bq24022_remove),
+};
+
+static int __init bq24022_init(void)
+{
+	return platform_driver_probe(&bq24022_driver, bq24022_probe);
+}
+
+static void __exit bq24022_exit(void)
+{
+	platform_driver_unregister(&bq24022_driver);
+}
+
+/*
+ * make sure this is probed before gpio_vbus and pda_power,
+ * but after asic3 or other GPIO expander drivers.
+ */
+subsys_initcall(bq24022_init);
+module_exit(bq24022_exit);
+
+MODULE_AUTHOR("Philipp Zabel");
+MODULE_DESCRIPTION("TI bq24022 Li-Ion Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
new file mode 100644
index 00000000000..9c798626156
--- /dev/null
+++ b/drivers/regulator/core.c
@@ -0,0 +1,1903 @@
+/*
+ * core.c  --  Voltage/Current Regulator framework.
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/suspend.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define REGULATOR_VERSION "0.5"
+
+static DEFINE_MUTEX(regulator_list_mutex);
+static LIST_HEAD(regulator_list);
+static LIST_HEAD(regulator_map_list);
+
+/**
+ * struct regulator_dev
+ *
+ * Voltage / Current regulator class device. One for each regulator.
+ */
+struct regulator_dev {
+	struct regulator_desc *desc;
+	int use_count;
+
+	/* lists we belong to */
+	struct list_head list; /* list of all regulators */
+	struct list_head slist; /* list of supplied regulators */
+
+	/* lists we own */
+	struct list_head consumer_list; /* consumers we supply */
+	struct list_head supply_list; /* regulators we supply */
+
+	struct blocking_notifier_head notifier;
+	struct mutex mutex; /* consumer lock */
+	struct module *owner;
+	struct device dev;
+	struct regulation_constraints *constraints;
+	struct regulator_dev *supply;	/* for tree */
+
+	void *reg_data;		/* regulator_dev data */
+};
+
+/**
+ * struct regulator_map
+ *
+ * Used to provide symbolic supply names to devices.
+ */
+struct regulator_map {
+	struct list_head list;
+	struct device *dev;
+	const char *supply;
+	const char *regulator;
+};
+
+static inline struct regulator_dev *to_rdev(struct device *d)
+{
+	return container_of(d, struct regulator_dev, dev);
+}
+
+/*
+ * struct regulator
+ *
+ * One for each consumer device.
+ */
+struct regulator {
+	struct device *dev;
+	struct list_head list;
+	int uA_load;
+	int min_uV;
+	int max_uV;
+	int enabled; /* client has called enabled */
+	char *supply_name;
+	struct device_attribute dev_attr;
+	struct regulator_dev *rdev;
+};
+
+static int _regulator_is_enabled(struct regulator_dev *rdev);
+static int _regulator_disable(struct regulator_dev *rdev);
+static int _regulator_get_voltage(struct regulator_dev *rdev);
+static int _regulator_get_current_limit(struct regulator_dev *rdev);
+static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
+static void _notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data);
+
+/* gets the regulator for a given consumer device */
+static struct regulator *get_device_regulator(struct device *dev)
+{
+	struct regulator *regulator = NULL;
+	struct regulator_dev *rdev;
+
+	mutex_lock(&regulator_list_mutex);
+	list_for_each_entry(rdev, &regulator_list, list) {
+		mutex_lock(&rdev->mutex);
+		list_for_each_entry(regulator, &rdev->consumer_list, list) {
+			if (regulator->dev == dev) {
+				mutex_unlock(&rdev->mutex);
+				mutex_unlock(&regulator_list_mutex);
+				return regulator;
+			}
+		}
+		mutex_unlock(&rdev->mutex);
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return NULL;
+}
+
+/* Platform voltage constraint check */
+static int regulator_check_voltage(struct regulator_dev *rdev,
+				   int *min_uV, int *max_uV)
+{
+	BUG_ON(*min_uV > *max_uV);
+
+	if (!rdev->constraints) {
+		printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+		       rdev->desc->name);
+		return -ENODEV;
+	}
+	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+		printk(KERN_ERR "%s: operation not allowed for %s\n",
+		       __func__, rdev->desc->name);
+		return -EPERM;
+	}
+
+	if (*max_uV > rdev->constraints->max_uV)
+		*max_uV = rdev->constraints->max_uV;
+	if (*min_uV < rdev->constraints->min_uV)
+		*min_uV = rdev->constraints->min_uV;
+
+	if (*min_uV > *max_uV)
+		return -EINVAL;
+
+	return 0;
+}
+
+/* current constraint check */
+static int regulator_check_current_limit(struct regulator_dev *rdev,
+					int *min_uA, int *max_uA)
+{
+	BUG_ON(*min_uA > *max_uA);
+
+	if (!rdev->constraints) {
+		printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+		       rdev->desc->name);
+		return -ENODEV;
+	}
+	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
+		printk(KERN_ERR "%s: operation not allowed for %s\n",
+		       __func__, rdev->desc->name);
+		return -EPERM;
+	}
+
+	if (*max_uA > rdev->constraints->max_uA)
+		*max_uA = rdev->constraints->max_uA;
+	if (*min_uA < rdev->constraints->min_uA)
+		*min_uA = rdev->constraints->min_uA;
+
+	if (*min_uA > *max_uA)
+		return -EINVAL;
+
+	return 0;
+}
+
+/* operating mode constraint check */
+static int regulator_check_mode(struct regulator_dev *rdev, int mode)
+{
+	if (!rdev->constraints) {
+		printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+		       rdev->desc->name);
+		return -ENODEV;
+	}
+	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
+		printk(KERN_ERR "%s: operation not allowed for %s\n",
+		       __func__, rdev->desc->name);
+		return -EPERM;
+	}
+	if (!(rdev->constraints->valid_modes_mask & mode)) {
+		printk(KERN_ERR "%s: invalid mode %x for %s\n",
+		       __func__, mode, rdev->desc->name);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* dynamic regulator mode switching constraint check */
+static int regulator_check_drms(struct regulator_dev *rdev)
+{
+	if (!rdev->constraints) {
+		printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+		       rdev->desc->name);
+		return -ENODEV;
+	}
+	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
+		printk(KERN_ERR "%s: operation not allowed for %s\n",
+		       __func__, rdev->desc->name);
+		return -EPERM;
+	}
+	return 0;
+}
+
+static ssize_t device_requested_uA_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct regulator *regulator;
+
+	regulator = get_device_regulator(dev);
+	if (regulator == NULL)
+		return 0;
+
+	return sprintf(buf, "%d\n", regulator->uA_load);
+}
+
+static ssize_t regulator_uV_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	ssize_t ret;
+
+	mutex_lock(&rdev->mutex);
+	ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev));
+	mutex_unlock(&rdev->mutex);
+
+	return ret;
+}
+
+static ssize_t regulator_uA_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
+}
+
+static ssize_t regulator_opmode_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	int mode = _regulator_get_mode(rdev);
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		return sprintf(buf, "fast\n");
+	case REGULATOR_MODE_NORMAL:
+		return sprintf(buf, "normal\n");
+	case REGULATOR_MODE_IDLE:
+		return sprintf(buf, "idle\n");
+	case REGULATOR_MODE_STANDBY:
+		return sprintf(buf, "standby\n");
+	}
+	return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_state_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	int state = _regulator_is_enabled(rdev);
+
+	if (state > 0)
+		return sprintf(buf, "enabled\n");
+	else if (state == 0)
+		return sprintf(buf, "disabled\n");
+	else
+		return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_min_uA_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "constraint not defined\n");
+
+	return sprintf(buf, "%d\n", rdev->constraints->min_uA);
+}
+
+static ssize_t regulator_max_uA_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "constraint not defined\n");
+
+	return sprintf(buf, "%d\n", rdev->constraints->max_uA);
+}
+
+static ssize_t regulator_min_uV_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "constraint not defined\n");
+
+	return sprintf(buf, "%d\n", rdev->constraints->min_uV);
+}
+
+static ssize_t regulator_max_uV_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "constraint not defined\n");
+
+	return sprintf(buf, "%d\n", rdev->constraints->max_uV);
+}
+
+static ssize_t regulator_total_uA_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	struct regulator *regulator;
+	int uA = 0;
+
+	mutex_lock(&rdev->mutex);
+	list_for_each_entry(regulator, &rdev->consumer_list, list)
+	    uA += regulator->uA_load;
+	mutex_unlock(&rdev->mutex);
+	return sprintf(buf, "%d\n", uA);
+}
+
+static ssize_t regulator_num_users_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	return sprintf(buf, "%d\n", rdev->use_count);
+}
+
+static ssize_t regulator_type_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	switch (rdev->desc->type) {
+	case REGULATOR_VOLTAGE:
+		return sprintf(buf, "voltage\n");
+	case REGULATOR_CURRENT:
+		return sprintf(buf, "current\n");
+	}
+	return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
+}
+
+static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
+}
+
+static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
+}
+
+static ssize_t suspend_opmode_show(struct regulator_dev *rdev,
+	unsigned int mode, char *buf)
+{
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		return sprintf(buf, "fast\n");
+	case REGULATOR_MODE_NORMAL:
+		return sprintf(buf, "normal\n");
+	case REGULATOR_MODE_IDLE:
+		return sprintf(buf, "idle\n");
+	case REGULATOR_MODE_STANDBY:
+		return sprintf(buf, "standby\n");
+	}
+	return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return suspend_opmode_show(rdev,
+		rdev->constraints->state_mem.mode, buf);
+}
+
+static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return suspend_opmode_show(rdev,
+		rdev->constraints->state_disk.mode, buf);
+}
+
+static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+	return suspend_opmode_show(rdev,
+		rdev->constraints->state_standby.mode, buf);
+}
+
+static ssize_t regulator_suspend_mem_state_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+
+	if (rdev->constraints->state_mem.enabled)
+		return sprintf(buf, "enabled\n");
+	else
+		return sprintf(buf, "disabled\n");
+}
+
+static ssize_t regulator_suspend_disk_state_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+
+	if (rdev->constraints->state_disk.enabled)
+		return sprintf(buf, "enabled\n");
+	else
+		return sprintf(buf, "disabled\n");
+}
+
+static ssize_t regulator_suspend_standby_state_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+
+	if (!rdev->constraints)
+		return sprintf(buf, "not defined\n");
+
+	if (rdev->constraints->state_standby.enabled)
+		return sprintf(buf, "enabled\n");
+	else
+		return sprintf(buf, "disabled\n");
+}
+static struct device_attribute regulator_dev_attrs[] = {
+	__ATTR(microvolts, 0444, regulator_uV_show, NULL),
+	__ATTR(microamps, 0444, regulator_uA_show, NULL),
+	__ATTR(opmode, 0444, regulator_opmode_show, NULL),
+	__ATTR(state, 0444, regulator_state_show, NULL),
+	__ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL),
+	__ATTR(min_microamps, 0444, regulator_min_uA_show, NULL),
+	__ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL),
+	__ATTR(max_microamps, 0444, regulator_max_uA_show, NULL),
+	__ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL),
+	__ATTR(num_users, 0444, regulator_num_users_show, NULL),
+	__ATTR(type, 0444, regulator_type_show, NULL),
+	__ATTR(suspend_mem_microvolts, 0444,
+		regulator_suspend_mem_uV_show, NULL),
+	__ATTR(suspend_disk_microvolts, 0444,
+		regulator_suspend_disk_uV_show, NULL),
+	__ATTR(suspend_standby_microvolts, 0444,
+		regulator_suspend_standby_uV_show, NULL),
+	__ATTR(suspend_mem_mode, 0444,
+		regulator_suspend_mem_mode_show, NULL),
+	__ATTR(suspend_disk_mode, 0444,
+		regulator_suspend_disk_mode_show, NULL),
+	__ATTR(suspend_standby_mode, 0444,
+		regulator_suspend_standby_mode_show, NULL),
+	__ATTR(suspend_mem_state, 0444,
+		regulator_suspend_mem_state_show, NULL),
+	__ATTR(suspend_disk_state, 0444,
+		regulator_suspend_disk_state_show, NULL),
+	__ATTR(suspend_standby_state, 0444,
+		regulator_suspend_standby_state_show, NULL),
+	__ATTR_NULL,
+};
+
+static void regulator_dev_release(struct device *dev)
+{
+	struct regulator_dev *rdev = to_rdev(dev);
+	kfree(rdev);
+}
+
+static struct class regulator_class = {
+	.name = "regulator",
+	.dev_release = regulator_dev_release,
+	.dev_attrs = regulator_dev_attrs,
+};
+
+/* Calculate the new optimum regulator operating mode based on the new total
+ * consumer load. All locks held by caller */
+static void drms_uA_update(struct regulator_dev *rdev)
+{
+	struct regulator *sibling;
+	int current_uA = 0, output_uV, input_uV, err;
+	unsigned int mode;
+
+	err = regulator_check_drms(rdev);
+	if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
+	    !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode);
+	return;
+
+	/* get output voltage */
+	output_uV = rdev->desc->ops->get_voltage(rdev);
+	if (output_uV <= 0)
+		return;
+
+	/* get input voltage */
+	if (rdev->supply && rdev->supply->desc->ops->get_voltage)
+		input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
+	else
+		input_uV = rdev->constraints->input_uV;
+	if (input_uV <= 0)
+		return;
+
+	/* calc total requested load */
+	list_for_each_entry(sibling, &rdev->consumer_list, list)
+	    current_uA += sibling->uA_load;
+
+	/* now get the optimum mode for our new total regulator load */
+	mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
+						  output_uV, current_uA);
+
+	/* check the new mode is allowed */
+	err = regulator_check_mode(rdev, mode);
+	if (err == 0)
+		rdev->desc->ops->set_mode(rdev, mode);
+}
+
+static int suspend_set_state(struct regulator_dev *rdev,
+	struct regulator_state *rstate)
+{
+	int ret = 0;
+
+	/* enable & disable are mandatory for suspend control */
+	if (!rdev->desc->ops->set_suspend_enable ||
+		!rdev->desc->ops->set_suspend_disable)
+		return -EINVAL;
+
+	if (rstate->enabled)
+		ret = rdev->desc->ops->set_suspend_enable(rdev);
+	else
+		ret = rdev->desc->ops->set_suspend_disable(rdev);
+	if (ret < 0) {
+		printk(KERN_ERR "%s: failed to enabled/disable\n", __func__);
+		return ret;
+	}
+
+	if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) {
+		ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV);
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to set voltage\n",
+				__func__);
+			return ret;
+		}
+	}
+
+	if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) {
+		ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode);
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to set mode\n", __func__);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/* locks held by caller */
+static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
+{
+	if (!rdev->constraints)
+		return -EINVAL;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return suspend_set_state(rdev,
+			&rdev->constraints->state_standby);
+	case PM_SUSPEND_MEM:
+		return suspend_set_state(rdev,
+			&rdev->constraints->state_mem);
+	case PM_SUSPEND_MAX:
+		return suspend_set_state(rdev,
+			&rdev->constraints->state_disk);
+	default:
+		return -EINVAL;
+	}
+}
+
+static void print_constraints(struct regulator_dev *rdev)
+{
+	struct regulation_constraints *constraints = rdev->constraints;
+	char buf[80];
+	int count;
+
+	if (rdev->desc->type == REGULATOR_VOLTAGE) {
+		if (constraints->min_uV == constraints->max_uV)
+			count = sprintf(buf, "%d mV ",
+					constraints->min_uV / 1000);
+		else
+			count = sprintf(buf, "%d <--> %d mV ",
+					constraints->min_uV / 1000,
+					constraints->max_uV / 1000);
+	} else {
+		if (constraints->min_uA == constraints->max_uA)
+			count = sprintf(buf, "%d mA ",
+					constraints->min_uA / 1000);
+		else
+			count = sprintf(buf, "%d <--> %d mA ",
+					constraints->min_uA / 1000,
+					constraints->max_uA / 1000);
+	}
+	if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
+		count += sprintf(buf + count, "fast ");
+	if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
+		count += sprintf(buf + count, "normal ");
+	if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
+		count += sprintf(buf + count, "idle ");
+	if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
+		count += sprintf(buf + count, "standby");
+
+	printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf);
+}
+
+#define REG_STR_SIZE	32
+
+static struct regulator *create_regulator(struct regulator_dev *rdev,
+					  struct device *dev,
+					  const char *supply_name)
+{
+	struct regulator *regulator;
+	char buf[REG_STR_SIZE];
+	int err, size;
+
+	regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
+	if (regulator == NULL)
+		return NULL;
+
+	mutex_lock(&rdev->mutex);
+	regulator->rdev = rdev;
+	list_add(&regulator->list, &rdev->consumer_list);
+
+	if (dev) {
+		/* create a 'requested_microamps_name' sysfs entry */
+		size = scnprintf(buf, REG_STR_SIZE, "microamps_requested_%s",
+			supply_name);
+		if (size >= REG_STR_SIZE)
+			goto overflow_err;
+
+		regulator->dev = dev;
+		regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
+		if (regulator->dev_attr.attr.name == NULL)
+			goto attr_name_err;
+
+		regulator->dev_attr.attr.owner = THIS_MODULE;
+		regulator->dev_attr.attr.mode = 0444;
+		regulator->dev_attr.show = device_requested_uA_show;
+		err = device_create_file(dev, &regulator->dev_attr);
+		if (err < 0) {
+			printk(KERN_WARNING "%s: could not add regulator_dev"
+				" load sysfs\n", __func__);
+			goto attr_name_err;
+		}
+
+		/* also add a link to the device sysfs entry */
+		size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
+				 dev->kobj.name, supply_name);
+		if (size >= REG_STR_SIZE)
+			goto attr_err;
+
+		regulator->supply_name = kstrdup(buf, GFP_KERNEL);
+		if (regulator->supply_name == NULL)
+			goto attr_err;
+
+		err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
+					buf);
+		if (err) {
+			printk(KERN_WARNING
+			       "%s: could not add device link %s err %d\n",
+			       __func__, dev->kobj.name, err);
+			device_remove_file(dev, &regulator->dev_attr);
+			goto link_name_err;
+		}
+	}
+	mutex_unlock(&rdev->mutex);
+	return regulator;
+link_name_err:
+	kfree(regulator->supply_name);
+attr_err:
+	device_remove_file(regulator->dev, &regulator->dev_attr);
+attr_name_err:
+	kfree(regulator->dev_attr.attr.name);
+overflow_err:
+	list_del(&regulator->list);
+	kfree(regulator);
+	mutex_unlock(&rdev->mutex);
+	return NULL;
+}
+
+/**
+ * regulator_get - lookup and obtain a reference to a regulator.
+ * @dev: device for regulator "consumer"
+ * @id: Supply name or regulator ID.
+ *
+ * Returns a struct regulator corresponding to the regulator producer,
+ * or IS_ERR() condition containing errno.  Use of supply names
+ * configured via regulator_set_device_supply() is strongly
+ * encouraged.
+ */
+struct regulator *regulator_get(struct device *dev, const char *id)
+{
+	struct regulator_dev *rdev;
+	struct regulator_map *map;
+	struct regulator *regulator = ERR_PTR(-ENODEV);
+	const char *supply = id;
+
+	if (id == NULL) {
+		printk(KERN_ERR "regulator: get() with no identifier\n");
+		return regulator;
+	}
+
+	mutex_lock(&regulator_list_mutex);
+
+	list_for_each_entry(map, &regulator_map_list, list) {
+		if (dev == map->dev &&
+		    strcmp(map->supply, id) == 0) {
+			supply = map->regulator;
+			break;
+		}
+	}
+
+	list_for_each_entry(rdev, &regulator_list, list) {
+		if (strcmp(supply, rdev->desc->name) == 0 &&
+		    try_module_get(rdev->owner))
+			goto found;
+	}
+	printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n",
+	       id);
+	mutex_unlock(&regulator_list_mutex);
+	return regulator;
+
+found:
+	regulator = create_regulator(rdev, dev, id);
+	if (regulator == NULL) {
+		regulator = ERR_PTR(-ENOMEM);
+		module_put(rdev->owner);
+	}
+
+	mutex_unlock(&regulator_list_mutex);
+	return regulator;
+}
+EXPORT_SYMBOL_GPL(regulator_get);
+
+/**
+ * regulator_put - "free" the regulator source
+ * @regulator: regulator source
+ *
+ * Note: drivers must ensure that all regulator_enable calls made on this
+ * regulator source are balanced by regulator_disable calls prior to calling
+ * this function.
+ */
+void regulator_put(struct regulator *regulator)
+{
+	struct regulator_dev *rdev;
+
+	if (regulator == NULL || IS_ERR(regulator))
+		return;
+
+	if (regulator->enabled) {
+		printk(KERN_WARNING "Releasing supply %s while enabled\n",
+		       regulator->supply_name);
+		WARN_ON(regulator->enabled);
+		regulator_disable(regulator);
+	}
+
+	mutex_lock(&regulator_list_mutex);
+	rdev = regulator->rdev;
+
+	/* remove any sysfs entries */
+	if (regulator->dev) {
+		sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
+		kfree(regulator->supply_name);
+		device_remove_file(regulator->dev, &regulator->dev_attr);
+		kfree(regulator->dev_attr.attr.name);
+	}
+	list_del(&regulator->list);
+	kfree(regulator);
+
+	module_put(rdev->owner);
+	mutex_unlock(&regulator_list_mutex);
+}
+EXPORT_SYMBOL_GPL(regulator_put);
+
+/* locks held by regulator_enable() */
+static int _regulator_enable(struct regulator_dev *rdev)
+{
+	int ret = -EINVAL;
+
+	if (!rdev->constraints) {
+		printk(KERN_ERR "%s: %s has no constraints\n",
+		       __func__, rdev->desc->name);
+		return ret;
+	}
+
+	/* do we need to enable the supply regulator first */
+	if (rdev->supply) {
+		ret = _regulator_enable(rdev->supply);
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to enable %s: %d\n",
+			       __func__, rdev->desc->name, ret);
+			return ret;
+		}
+	}
+
+	/* check voltage and requested load before enabling */
+	if (rdev->desc->ops->enable) {
+
+		if (rdev->constraints &&
+			(rdev->constraints->valid_ops_mask &
+			REGULATOR_CHANGE_DRMS))
+			drms_uA_update(rdev);
+
+		ret = rdev->desc->ops->enable(rdev);
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to enable %s: %d\n",
+			       __func__, rdev->desc->name, ret);
+			return ret;
+		}
+		rdev->use_count++;
+		return ret;
+	}
+
+	return ret;
+}
+
+/**
+ * regulator_enable - enable regulator output
+ * @regulator: regulator source
+ *
+ * Enable the regulator output at the predefined voltage or current value.
+ * NOTE: the output value can be set by other drivers, boot loader or may be
+ * hardwired in the regulator.
+ * NOTE: calls to regulator_enable() must be balanced with calls to
+ * regulator_disable().
+ */
+int regulator_enable(struct regulator *regulator)
+{
+	int ret;
+
+	if (regulator->enabled) {
+		printk(KERN_CRIT "Regulator %s already enabled\n",
+		       regulator->supply_name);
+		WARN_ON(regulator->enabled);
+		return 0;
+	}
+
+	mutex_lock(&regulator->rdev->mutex);
+	regulator->enabled = 1;
+	ret = _regulator_enable(regulator->rdev);
+	if (ret != 0)
+		regulator->enabled = 0;
+	mutex_unlock(&regulator->rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_enable);
+
+/* locks held by regulator_disable() */
+static int _regulator_disable(struct regulator_dev *rdev)
+{
+	int ret = 0;
+
+	/* are we the last user and permitted to disable ? */
+	if (rdev->use_count == 1 && !rdev->constraints->always_on) {
+
+		/* we are last user */
+		if (rdev->desc->ops->disable) {
+			ret = rdev->desc->ops->disable(rdev);
+			if (ret < 0) {
+				printk(KERN_ERR "%s: failed to disable %s\n",
+				       __func__, rdev->desc->name);
+				return ret;
+			}
+		}
+
+		/* decrease our supplies ref count and disable if required */
+		if (rdev->supply)
+			_regulator_disable(rdev->supply);
+
+		rdev->use_count = 0;
+	} else if (rdev->use_count > 1) {
+
+		if (rdev->constraints &&
+			(rdev->constraints->valid_ops_mask &
+			REGULATOR_CHANGE_DRMS))
+			drms_uA_update(rdev);
+
+		rdev->use_count--;
+	}
+	return ret;
+}
+
+/**
+ * regulator_disable - disable regulator output
+ * @regulator: regulator source
+ *
+ * Disable the regulator output voltage or current.
+ * NOTE: this will only disable the regulator output if no other consumer
+ * devices have it enabled.
+ * NOTE: calls to regulator_enable() must be balanced with calls to
+ * regulator_disable().
+ */
+int regulator_disable(struct regulator *regulator)
+{
+	int ret;
+
+	if (!regulator->enabled) {
+		printk(KERN_ERR "%s: not in use by this consumer\n",
+			__func__);
+		return 0;
+	}
+
+	mutex_lock(&regulator->rdev->mutex);
+	regulator->enabled = 0;
+	regulator->uA_load = 0;
+	ret = _regulator_disable(regulator->rdev);
+	mutex_unlock(&regulator->rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_disable);
+
+/* locks held by regulator_force_disable() */
+static int _regulator_force_disable(struct regulator_dev *rdev)
+{
+	int ret = 0;
+
+	/* force disable */
+	if (rdev->desc->ops->disable) {
+		/* ah well, who wants to live forever... */
+		ret = rdev->desc->ops->disable(rdev);
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to force disable %s\n",
+			       __func__, rdev->desc->name);
+			return ret;
+		}
+		/* notify other consumers that power has been forced off */
+		_notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE,
+			NULL);
+	}
+
+	/* decrease our supplies ref count and disable if required */
+	if (rdev->supply)
+		_regulator_disable(rdev->supply);
+
+	rdev->use_count = 0;
+	return ret;
+}
+
+/**
+ * regulator_force_disable - force disable regulator output
+ * @regulator: regulator source
+ *
+ * Forcibly disable the regulator output voltage or current.
+ * NOTE: this *will* disable the regulator output even if other consumer
+ * devices have it enabled. This should be used for situations when device
+ * damage will likely occur if the regulator is not disabled (e.g. over temp).
+ */
+int regulator_force_disable(struct regulator *regulator)
+{
+	int ret;
+
+	mutex_lock(&regulator->rdev->mutex);
+	regulator->enabled = 0;
+	regulator->uA_load = 0;
+	ret = _regulator_force_disable(regulator->rdev);
+	mutex_unlock(&regulator->rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_force_disable);
+
+static int _regulator_is_enabled(struct regulator_dev *rdev)
+{
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->is_enabled) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = rdev->desc->ops->is_enabled(rdev);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+
+/**
+ * regulator_is_enabled - is the regulator output enabled
+ * @regulator: regulator source
+ *
+ * Returns zero for disabled otherwise return number of enable requests.
+ */
+int regulator_is_enabled(struct regulator *regulator)
+{
+	return _regulator_is_enabled(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_is_enabled);
+
+/**
+ * regulator_set_voltage - set regulator output voltage
+ * @regulator: regulator source
+ * @min_uV: Minimum required voltage in uV
+ * @max_uV: Maximum acceptable voltage in uV
+ *
+ * Sets a voltage regulator to the desired output voltage. This can be set
+ * during any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the voltage will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new voltage when enabled.
+ *
+ * NOTE: If the regulator is shared between several devices then the lowest
+ * request voltage that meets the system constraints will be used.
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->set_voltage) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* constraints check */
+	ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
+	if (ret < 0)
+		goto out;
+	regulator->min_uV = min_uV;
+	regulator->max_uV = max_uV;
+	ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV);
+
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage);
+
+static int _regulator_get_voltage(struct regulator_dev *rdev)
+{
+	/* sanity check */
+	if (rdev->desc->ops->get_voltage)
+		return rdev->desc->ops->get_voltage(rdev);
+	else
+		return -EINVAL;
+}
+
+/**
+ * regulator_get_voltage - get regulator output voltage
+ * @regulator: regulator source
+ *
+ * This returns the current regulator voltage in uV.
+ *
+ * NOTE: If the regulator is disabled it will return the voltage value. This
+ * function should not be used to determine regulator state.
+ */
+int regulator_get_voltage(struct regulator *regulator)
+{
+	int ret;
+
+	mutex_lock(&regulator->rdev->mutex);
+
+	ret = _regulator_get_voltage(regulator->rdev);
+
+	mutex_unlock(&regulator->rdev->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_get_voltage);
+
+/**
+ * regulator_set_current_limit - set regulator output current limit
+ * @regulator: regulator source
+ * @min_uA: Minimuum supported current in uA
+ * @max_uA: Maximum supported current in uA
+ *
+ * Sets current sink to the desired output current. This can be set during
+ * any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the current will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new current when enabled.
+ *
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_current_limit(struct regulator *regulator,
+			       int min_uA, int max_uA)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->set_current_limit) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* constraints check */
+	ret = regulator_check_current_limit(rdev, &min_uA, &max_uA);
+	if (ret < 0)
+		goto out;
+
+	ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_current_limit);
+
+static int _regulator_get_current_limit(struct regulator_dev *rdev)
+{
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->get_current_limit) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = rdev->desc->ops->get_current_limit(rdev);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+
+/**
+ * regulator_get_current_limit - get regulator output current
+ * @regulator: regulator source
+ *
+ * This returns the current supplied by the specified current sink in uA.
+ *
+ * NOTE: If the regulator is disabled it will return the current value. This
+ * function should not be used to determine regulator state.
+ */
+int regulator_get_current_limit(struct regulator *regulator)
+{
+	return _regulator_get_current_limit(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_get_current_limit);
+
+/**
+ * regulator_set_mode - set regulator operating mode
+ * @regulator: regulator source
+ * @mode: operating mode - one of the REGULATOR_MODE constants
+ *
+ * Set regulator operating mode to increase regulator efficiency or improve
+ * regulation performance.
+ *
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_mode(struct regulator *regulator, unsigned int mode)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->set_mode) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* constraints check */
+	ret = regulator_check_mode(rdev, mode);
+	if (ret < 0)
+		goto out;
+
+	ret = rdev->desc->ops->set_mode(rdev, mode);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_mode);
+
+static unsigned int _regulator_get_mode(struct regulator_dev *rdev)
+{
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->get_mode) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = rdev->desc->ops->get_mode(rdev);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+
+/**
+ * regulator_get_mode - get regulator operating mode
+ * @regulator: regulator source
+ *
+ * Get the current regulator operating mode.
+ */
+unsigned int regulator_get_mode(struct regulator *regulator)
+{
+	return _regulator_get_mode(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_get_mode);
+
+/**
+ * regulator_set_optimum_mode - set regulator optimum operating mode
+ * @regulator: regulator source
+ * @uA_load: load current
+ *
+ * Notifies the regulator core of a new device load. This is then used by
+ * DRMS (if enabled by constraints) to set the most efficient regulator
+ * operating mode for the new regulator loading.
+ *
+ * Consumer devices notify their supply regulator of the maximum power
+ * they will require (can be taken from device datasheet in the power
+ * consumption tables) when they change operational status and hence power
+ * state. Examples of operational state changes that can affect power
+ * consumption are :-
+ *
+ *    o Device is opened / closed.
+ *    o Device I/O is about to begin or has just finished.
+ *    o Device is idling in between work.
+ *
+ * This information is also exported via sysfs to userspace.
+ *
+ * DRMS will sum the total requested load on the regulator and change
+ * to the most efficient operating mode if platform constraints allow.
+ *
+ * Returns the new regulator mode or error.
+ */
+int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	struct regulator *consumer;
+	int ret, output_uV, input_uV, total_uA_load = 0;
+	unsigned int mode;
+
+	mutex_lock(&rdev->mutex);
+
+	regulator->uA_load = uA_load;
+	ret = regulator_check_drms(rdev);
+	if (ret < 0)
+		goto out;
+	ret = -EINVAL;
+
+	/* sanity check */
+	if (!rdev->desc->ops->get_optimum_mode)
+		goto out;
+
+	/* get output voltage */
+	output_uV = rdev->desc->ops->get_voltage(rdev);
+	if (output_uV <= 0) {
+		printk(KERN_ERR "%s: invalid output voltage found for %s\n",
+			__func__, rdev->desc->name);
+		goto out;
+	}
+
+	/* get input voltage */
+	if (rdev->supply && rdev->supply->desc->ops->get_voltage)
+		input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
+	else
+		input_uV = rdev->constraints->input_uV;
+	if (input_uV <= 0) {
+		printk(KERN_ERR "%s: invalid input voltage found for %s\n",
+			__func__, rdev->desc->name);
+		goto out;
+	}
+
+	/* calc total requested load for this regulator */
+	list_for_each_entry(consumer, &rdev->consumer_list, list)
+	    total_uA_load += consumer->uA_load;
+
+	mode = rdev->desc->ops->get_optimum_mode(rdev,
+						 input_uV, output_uV,
+						 total_uA_load);
+	if (ret <= 0) {
+		printk(KERN_ERR "%s: failed to get optimum mode for %s @"
+			" %d uA %d -> %d uV\n", __func__, rdev->desc->name,
+			total_uA_load, input_uV, output_uV);
+		goto out;
+	}
+
+	ret = rdev->desc->ops->set_mode(rdev, mode);
+	if (ret <= 0) {
+		printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
+			__func__, mode, rdev->desc->name);
+		goto out;
+	}
+	ret = mode;
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
+
+/**
+ * regulator_register_notifier - register regulator event notifier
+ * @regulator: regulator source
+ * @notifier_block: notifier block
+ *
+ * Register notifier block to receive regulator events.
+ */
+int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&regulator->rdev->notifier,
+						nb);
+}
+EXPORT_SYMBOL_GPL(regulator_register_notifier);
+
+/**
+ * regulator_unregister_notifier - unregister regulator event notifier
+ * @regulator: regulator source
+ * @notifier_block: notifier block
+ *
+ * Unregister regulator event notifier block.
+ */
+int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&regulator->rdev->notifier,
+						  nb);
+}
+EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
+
+/* notify regulator consumers and downstream regulator consumers */
+static void _notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data)
+{
+	struct regulator_dev *_rdev;
+
+	/* call rdev chain first */
+	mutex_lock(&rdev->mutex);
+	blocking_notifier_call_chain(&rdev->notifier, event, NULL);
+	mutex_unlock(&rdev->mutex);
+
+	/* now notify regulator we supply */
+	list_for_each_entry(_rdev, &rdev->supply_list, slist)
+		_notifier_call_chain(_rdev, event, data);
+}
+
+/**
+ * regulator_bulk_get - get multiple regulator consumers
+ *
+ * @dev:           Device to supply
+ * @num_consumers: Number of consumers to register
+ * @consumers:     Configuration of consumers; clients are stored here.
+ *
+ * @return 0 on success, an errno on failure.
+ *
+ * This helper function allows drivers to get several regulator
+ * consumers in one operation.  If any of the regulators cannot be
+ * acquired then any regulators that were allocated will be freed
+ * before returning to the caller.
+ */
+int regulator_bulk_get(struct device *dev, int num_consumers,
+		       struct regulator_bulk_data *consumers)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < num_consumers; i++)
+		consumers[i].consumer = NULL;
+
+	for (i = 0; i < num_consumers; i++) {
+		consumers[i].consumer = regulator_get(dev,
+						      consumers[i].supply);
+		if (IS_ERR(consumers[i].consumer)) {
+			dev_err(dev, "Failed to get supply '%s'\n",
+				consumers[i].supply);
+			ret = PTR_ERR(consumers[i].consumer);
+			consumers[i].consumer = NULL;
+			goto err;
+		}
+	}
+
+	return 0;
+
+err:
+	for (i = 0; i < num_consumers && consumers[i].consumer; i++)
+		regulator_put(consumers[i].consumer);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_get);
+
+/**
+ * regulator_bulk_enable - enable multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers:     Consumer data; clients are stored here.
+ * @return         0 on success, an errno on failure
+ *
+ * This convenience API allows consumers to enable multiple regulator
+ * clients in a single API call.  If any consumers cannot be enabled
+ * then any others that were enabled will be disabled again prior to
+ * return.
+ */
+int regulator_bulk_enable(int num_consumers,
+			  struct regulator_bulk_data *consumers)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < num_consumers; i++) {
+		ret = regulator_enable(consumers[i].consumer);
+		if (ret != 0)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply);
+	for (i = 0; i < num_consumers; i++)
+		regulator_disable(consumers[i].consumer);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_enable);
+
+/**
+ * regulator_bulk_disable - disable multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers:     Consumer data; clients are stored here.
+ * @return         0 on success, an errno on failure
+ *
+ * This convenience API allows consumers to disable multiple regulator
+ * clients in a single API call.  If any consumers cannot be enabled
+ * then any others that were disabled will be disabled again prior to
+ * return.
+ */
+int regulator_bulk_disable(int num_consumers,
+			   struct regulator_bulk_data *consumers)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < num_consumers; i++) {
+		ret = regulator_disable(consumers[i].consumer);
+		if (ret != 0)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply);
+	for (i = 0; i < num_consumers; i++)
+		regulator_enable(consumers[i].consumer);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_disable);
+
+/**
+ * regulator_bulk_free - free multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers:     Consumer data; clients are stored here.
+ *
+ * This convenience API allows consumers to free multiple regulator
+ * clients in a single API call.
+ */
+void regulator_bulk_free(int num_consumers,
+			 struct regulator_bulk_data *consumers)
+{
+	int i;
+
+	for (i = 0; i < num_consumers; i++) {
+		regulator_put(consumers[i].consumer);
+		consumers[i].consumer = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_free);
+
+/**
+ * regulator_notifier_call_chain - call regulator event notifier
+ * @regulator: regulator source
+ * @event: notifier block
+ * @data:
+ *
+ * Called by regulator drivers to notify clients a regulator event has
+ * occurred. We also notify regulator clients downstream.
+ */
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data)
+{
+	_notifier_call_chain(rdev, event, data);
+	return NOTIFY_DONE;
+
+}
+EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
+
+/**
+ * regulator_register - register regulator
+ * @regulator: regulator source
+ * @reg_data: private regulator data
+ *
+ * Called by regulator drivers to register a regulator.
+ * Returns 0 on success.
+ */
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+					  void *reg_data)
+{
+	static atomic_t regulator_no = ATOMIC_INIT(0);
+	struct regulator_dev *rdev;
+	int ret;
+
+	if (regulator_desc == NULL)
+		return ERR_PTR(-EINVAL);
+
+	if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
+		return ERR_PTR(-EINVAL);
+
+	if (!regulator_desc->type == REGULATOR_VOLTAGE &&
+	    !regulator_desc->type == REGULATOR_CURRENT)
+		return ERR_PTR(-EINVAL);
+
+	rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
+	if (rdev == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_lock(&regulator_list_mutex);
+
+	mutex_init(&rdev->mutex);
+	rdev->reg_data = reg_data;
+	rdev->owner = regulator_desc->owner;
+	rdev->desc = regulator_desc;
+	INIT_LIST_HEAD(&rdev->consumer_list);
+	INIT_LIST_HEAD(&rdev->supply_list);
+	INIT_LIST_HEAD(&rdev->list);
+	INIT_LIST_HEAD(&rdev->slist);
+	BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
+
+	rdev->dev.class = &regulator_class;
+	device_initialize(&rdev->dev);
+	snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id),
+		 "regulator_%ld_%s",
+		 (unsigned long)atomic_inc_return(&regulator_no) - 1,
+		 regulator_desc->name);
+
+	ret = device_add(&rdev->dev);
+	if (ret == 0)
+		list_add(&rdev->list, &regulator_list);
+	else {
+		kfree(rdev);
+		rdev = ERR_PTR(ret);
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return rdev;
+}
+EXPORT_SYMBOL_GPL(regulator_register);
+
+/**
+ * regulator_unregister - unregister regulator
+ * @regulator: regulator source
+ *
+ * Called by regulator drivers to unregister a regulator.
+ */
+void regulator_unregister(struct regulator_dev *rdev)
+{
+	if (rdev == NULL)
+		return;
+
+	mutex_lock(&regulator_list_mutex);
+	list_del(&rdev->list);
+	if (rdev->supply)
+		sysfs_remove_link(&rdev->dev.kobj, "supply");
+	device_unregister(&rdev->dev);
+	mutex_unlock(&regulator_list_mutex);
+}
+EXPORT_SYMBOL_GPL(regulator_unregister);
+
+/**
+ * regulator_set_supply - set regulator supply regulator
+ * @regulator: regulator name
+ * @supply: supply regulator name
+ *
+ * Called by platform initialisation code to set the supply regulator for this
+ * regulator. This ensures that a regulators supply will also be enabled by the
+ * core if it's child is enabled.
+ */
+int regulator_set_supply(const char *regulator, const char *supply)
+{
+	struct regulator_dev *rdev, *supply_rdev;
+	int err;
+
+	if (regulator == NULL || supply == NULL)
+		return -EINVAL;
+
+	mutex_lock(&regulator_list_mutex);
+
+	list_for_each_entry(rdev, &regulator_list, list) {
+		if (!strcmp(rdev->desc->name, regulator))
+			goto found_regulator;
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return -ENODEV;
+
+found_regulator:
+	list_for_each_entry(supply_rdev, &regulator_list, list) {
+		if (!strcmp(supply_rdev->desc->name, supply))
+			goto found_supply;
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return -ENODEV;
+
+found_supply:
+	err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj,
+				"supply");
+	if (err) {
+		printk(KERN_ERR
+		       "%s: could not add device link %s err %d\n",
+		       __func__, supply_rdev->dev.kobj.name, err);
+		       goto out;
+	}
+	rdev->supply = supply_rdev;
+	list_add(&rdev->slist, &supply_rdev->supply_list);
+out:
+	mutex_unlock(&regulator_list_mutex);
+	return err;
+}
+EXPORT_SYMBOL_GPL(regulator_set_supply);
+
+/**
+ * regulator_get_supply - get regulator supply regulator
+ * @regulator: regulator name
+ *
+ * Returns the supply supply regulator name or NULL if no supply regulator
+ * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc)
+ */
+const char *regulator_get_supply(const char *regulator)
+{
+	struct regulator_dev *rdev;
+
+	if (regulator == NULL)
+		return NULL;
+
+	mutex_lock(&regulator_list_mutex);
+	list_for_each_entry(rdev, &regulator_list, list) {
+		if (!strcmp(rdev->desc->name, regulator))
+			goto found;
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return NULL;
+
+found:
+	mutex_unlock(&regulator_list_mutex);
+	if (rdev->supply)
+		return rdev->supply->desc->name;
+	else
+		return NULL;
+}
+EXPORT_SYMBOL_GPL(regulator_get_supply);
+
+/**
+ * regulator_set_machine_constraints - sets regulator constraints
+ * @regulator: regulator source
+ *
+ * Allows platform initialisation code to define and constrain
+ * regulator circuits e.g. valid voltage/current ranges, etc.  NOTE:
+ * Constraints *must* be set by platform code in order for some
+ * regulator operations to proceed i.e. set_voltage, set_current_limit,
+ * set_mode.
+ */
+int regulator_set_machine_constraints(const char *regulator_name,
+	struct regulation_constraints *constraints)
+{
+	struct regulator_dev *rdev;
+	int ret = 0;
+
+	if (regulator_name == NULL)
+		return -EINVAL;
+
+	mutex_lock(&regulator_list_mutex);
+
+	list_for_each_entry(rdev, &regulator_list, list) {
+		if (!strcmp(regulator_name, rdev->desc->name))
+			goto found;
+	}
+	ret = -ENODEV;
+	goto out;
+
+found:
+	mutex_lock(&rdev->mutex);
+	rdev->constraints = constraints;
+
+	/* do we need to apply the constraint voltage */
+	if (rdev->constraints->apply_uV &&
+		rdev->constraints->min_uV == rdev->constraints->max_uV &&
+		rdev->desc->ops->set_voltage) {
+		ret = rdev->desc->ops->set_voltage(rdev,
+			rdev->constraints->min_uV, rdev->constraints->max_uV);
+			if (ret < 0) {
+				printk(KERN_ERR "%s: failed to apply %duV"
+					" constraint\n", __func__,
+					rdev->constraints->min_uV);
+				rdev->constraints = NULL;
+				goto out;
+			}
+	}
+
+	/* are we enabled at boot time by firmware / bootloader */
+	if (rdev->constraints->boot_on)
+		rdev->use_count = 1;
+
+	/* do we need to setup our suspend state */
+	if (constraints->initial_state)
+		ret = suspend_prepare(rdev, constraints->initial_state);
+
+	print_constraints(rdev);
+	mutex_unlock(&rdev->mutex);
+
+out:
+	mutex_unlock(&regulator_list_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_machine_constraints);
+
+
+/**
+ * regulator_set_device_supply: Bind a regulator to a symbolic supply
+ * @regulator: regulator source
+ * @dev:       device the supply applies to
+ * @supply:    symbolic name for supply
+ *
+ * Allows platform initialisation code to map physical regulator
+ * sources to symbolic names for supplies for use by devices.  Devices
+ * should use these symbolic names to request regulators, avoiding the
+ * need to provide board-specific regulator names as platform data.
+ */
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+				const char *supply)
+{
+	struct regulator_map *node;
+
+	if (regulator == NULL || supply == NULL)
+		return -EINVAL;
+
+	node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
+	if (node == NULL)
+		return -ENOMEM;
+
+	node->regulator = regulator;
+	node->dev = dev;
+	node->supply = supply;
+
+	mutex_lock(&regulator_list_mutex);
+	list_add(&node->list, &regulator_map_list);
+	mutex_unlock(&regulator_list_mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_set_device_supply);
+
+/**
+ * regulator_suspend_prepare: prepare regulators for system wide suspend
+ * @state: system suspend state
+ *
+ * Configure each regulator with it's suspend operating parameters for state.
+ * This will usually be called by machine suspend code prior to supending.
+ */
+int regulator_suspend_prepare(suspend_state_t state)
+{
+	struct regulator_dev *rdev;
+	int ret = 0;
+
+	/* ON is handled by regulator active state */
+	if (state == PM_SUSPEND_ON)
+		return -EINVAL;
+
+	mutex_lock(&regulator_list_mutex);
+	list_for_each_entry(rdev, &regulator_list, list) {
+
+		mutex_lock(&rdev->mutex);
+		ret = suspend_prepare(rdev, state);
+		mutex_unlock(&rdev->mutex);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to prepare %s\n",
+				__func__, rdev->desc->name);
+			goto out;
+		}
+	}
+out:
+	mutex_unlock(&regulator_list_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
+
+/**
+ * rdev_get_drvdata - get rdev regulator driver data
+ * @regulator: regulator
+ *
+ * Get rdev regulator driver private data. This call can be used in the
+ * regulator driver context.
+ */
+void *rdev_get_drvdata(struct regulator_dev *rdev)
+{
+	return rdev->reg_data;
+}
+EXPORT_SYMBOL_GPL(rdev_get_drvdata);
+
+/**
+ * regulator_get_drvdata - get regulator driver data
+ * @regulator: regulator
+ *
+ * Get regulator driver private data. This call can be used in the consumer
+ * driver context when non API regulator specific functions need to be called.
+ */
+void *regulator_get_drvdata(struct regulator *regulator)
+{
+	return regulator->rdev->reg_data;
+}
+EXPORT_SYMBOL_GPL(regulator_get_drvdata);
+
+/**
+ * regulator_set_drvdata - set regulator driver data
+ * @regulator: regulator
+ * @data: data
+ */
+void regulator_set_drvdata(struct regulator *regulator, void *data)
+{
+	regulator->rdev->reg_data = data;
+}
+EXPORT_SYMBOL_GPL(regulator_set_drvdata);
+
+/**
+ * regulator_get_id - get regulator ID
+ * @regulator: regulator
+ */
+int rdev_get_id(struct regulator_dev *rdev)
+{
+	return rdev->desc->id;
+}
+EXPORT_SYMBOL_GPL(rdev_get_id);
+
+static int __init regulator_init(void)
+{
+	printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION);
+	return class_register(&regulator_class);
+}
+
+/* init early to allow our consumers to complete system booting */
+core_initcall(regulator_init);
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
new file mode 100644
index 00000000000..d31db3e1491
--- /dev/null
+++ b/drivers/regulator/fixed.c
@@ -0,0 +1,129 @@
+/*
+ * fixed.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
+
+struct fixed_voltage_data {
+	struct regulator_desc desc;
+	struct regulator_dev *dev;
+	int microvolts;
+};
+
+static int fixed_voltage_is_enabled(struct regulator_dev *dev)
+{
+	return 1;
+}
+
+static int fixed_voltage_enable(struct regulator_dev *dev)
+{
+	return 0;
+}
+
+static int fixed_voltage_get_voltage(struct regulator_dev *dev)
+{
+	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+	return data->microvolts;
+}
+
+static struct regulator_ops fixed_voltage_ops = {
+	.is_enabled = fixed_voltage_is_enabled,
+	.enable = fixed_voltage_enable,
+	.get_voltage = fixed_voltage_get_voltage,
+};
+
+static int regulator_fixed_voltage_probe(struct platform_device *pdev)
+{
+	struct fixed_voltage_config *config = pdev->dev.platform_data;
+	struct fixed_voltage_data *drvdata;
+	int ret;
+
+	drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL);
+	if (drvdata == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+	if (drvdata->desc.name == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	drvdata->desc.type = REGULATOR_VOLTAGE;
+	drvdata->desc.owner = THIS_MODULE;
+	drvdata->desc.ops = &fixed_voltage_ops,
+
+	drvdata->microvolts = config->microvolts;
+
+	drvdata->dev = regulator_register(&drvdata->desc, drvdata);
+	if (IS_ERR(drvdata->dev)) {
+		ret = PTR_ERR(drvdata->dev);
+		goto err_name;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+	dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name,
+		drvdata->microvolts);
+
+	return 0;
+
+err_name:
+	kfree(drvdata->desc.name);
+err:
+	kfree(drvdata);
+	return ret;
+}
+
+static int regulator_fixed_voltage_remove(struct platform_device *pdev)
+{
+	struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
+
+	regulator_unregister(drvdata->dev);
+	kfree(drvdata->desc.name);
+	kfree(drvdata);
+
+	return 0;
+}
+
+static struct platform_driver regulator_fixed_voltage_driver = {
+	.probe		= regulator_fixed_voltage_probe,
+	.remove		= regulator_fixed_voltage_remove,
+	.driver		= {
+		.name		= "reg-fixed-voltage",
+	},
+};
+
+static int __init regulator_fixed_voltage_init(void)
+{
+	return platform_driver_register(&regulator_fixed_voltage_driver);
+}
+module_init(regulator_fixed_voltage_init);
+
+static void __exit regulator_fixed_voltage_exit(void)
+{
+	platform_driver_unregister(&regulator_fixed_voltage_driver);
+}
+module_exit(regulator_fixed_voltage_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Fixed voltage regulator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
new file mode 100644
index 00000000000..5ddb464b1c3
--- /dev/null
+++ b/drivers/regulator/virtual.c
@@ -0,0 +1,345 @@
+/*
+ * reg-virtual-consumer.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+struct virtual_consumer_data {
+	struct mutex lock;
+	struct regulator *regulator;
+	int enabled;
+	int min_uV;
+	int max_uV;
+	int min_uA;
+	int max_uA;
+	unsigned int mode;
+};
+
+static void update_voltage_constraints(struct virtual_consumer_data *data)
+{
+	int ret;
+
+	if (data->min_uV && data->max_uV
+	    && data->min_uV <= data->max_uV) {
+		ret = regulator_set_voltage(data->regulator,
+					    data->min_uV, data->max_uV);
+		if (ret != 0) {
+			printk(KERN_ERR "regulator_set_voltage() failed: %d\n",
+			       ret);
+			return;
+		}
+	}
+
+	if (data->min_uV && data->max_uV && !data->enabled) {
+		ret = regulator_enable(data->regulator);
+		if (ret == 0)
+			data->enabled = 1;
+		else
+			printk(KERN_ERR "regulator_enable() failed: %d\n",
+				ret);
+	}
+
+	if (!(data->min_uV && data->max_uV) && data->enabled) {
+		ret = regulator_disable(data->regulator);
+		if (ret == 0)
+			data->enabled = 0;
+		else
+			printk(KERN_ERR "regulator_disable() failed: %d\n",
+				ret);
+	}
+}
+
+static void update_current_limit_constraints(struct virtual_consumer_data
+						*data)
+{
+	int ret;
+
+	if (data->max_uA
+	    && data->min_uA <= data->max_uA) {
+		ret = regulator_set_current_limit(data->regulator,
+					data->min_uA, data->max_uA);
+		if (ret != 0) {
+			pr_err("regulator_set_current_limit() failed: %d\n",
+			       ret);
+			return;
+		}
+	}
+
+	if (data->max_uA && !data->enabled) {
+		ret = regulator_enable(data->regulator);
+		if (ret == 0)
+			data->enabled = 1;
+		else
+			printk(KERN_ERR "regulator_enable() failed: %d\n",
+				ret);
+	}
+
+	if (!(data->min_uA && data->max_uA) && data->enabled) {
+		ret = regulator_disable(data->regulator);
+		if (ret == 0)
+			data->enabled = 0;
+		else
+			printk(KERN_ERR "regulator_disable() failed: %d\n",
+				ret);
+	}
+}
+
+static ssize_t show_min_uV(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", data->min_uV);
+}
+
+static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) != 0)
+		return count;
+
+	mutex_lock(&data->lock);
+
+	data->min_uV = val;
+	update_voltage_constraints(data);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_max_uV(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", data->max_uV);
+}
+
+static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) != 0)
+		return count;
+
+	mutex_lock(&data->lock);
+
+	data->max_uV = val;
+	update_voltage_constraints(data);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_min_uA(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", data->min_uA);
+}
+
+static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) != 0)
+		return count;
+
+	mutex_lock(&data->lock);
+
+	data->min_uA = val;
+	update_current_limit_constraints(data);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_max_uA(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", data->max_uA);
+}
+
+static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) != 0)
+		return count;
+
+	mutex_lock(&data->lock);
+
+	data->max_uA = val;
+	update_current_limit_constraints(data);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_mode(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+
+	switch (data->mode) {
+	case REGULATOR_MODE_FAST:
+		return sprintf(buf, "fast\n");
+	case REGULATOR_MODE_NORMAL:
+		return sprintf(buf, "normal\n");
+	case REGULATOR_MODE_IDLE:
+		return sprintf(buf, "idle\n");
+	case REGULATOR_MODE_STANDBY:
+		return sprintf(buf, "standby\n");
+	default:
+		return sprintf(buf, "unknown\n");
+	}
+}
+
+static ssize_t set_mode(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct virtual_consumer_data *data = dev_get_drvdata(dev);
+	unsigned int mode;
+	int ret;
+
+	if (strncmp(buf, "fast", strlen("fast")) == 0)
+		mode = REGULATOR_MODE_FAST;
+	else if (strncmp(buf, "normal", strlen("normal")) == 0)
+		mode = REGULATOR_MODE_NORMAL;
+	else if (strncmp(buf, "idle", strlen("idle")) == 0)
+		mode = REGULATOR_MODE_IDLE;
+	else if (strncmp(buf, "standby", strlen("standby")) == 0)
+		mode = REGULATOR_MODE_STANDBY;
+	else {
+		dev_err(dev, "Configuring invalid mode\n");
+		return count;
+	}
+
+	mutex_lock(&data->lock);
+	ret = regulator_set_mode(data->regulator, mode);
+	if (ret == 0)
+		data->mode = mode;
+	else
+		dev_err(dev, "Failed to configure mode: %d\n", ret);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(min_microvolts, 0666, show_min_uV, set_min_uV);
+static DEVICE_ATTR(max_microvolts, 0666, show_max_uV, set_max_uV);
+static DEVICE_ATTR(min_microamps, 0666, show_min_uA, set_min_uA);
+static DEVICE_ATTR(max_microamps, 0666, show_max_uA, set_max_uA);
+static DEVICE_ATTR(mode, 0666, show_mode, set_mode);
+
+struct device_attribute *attributes[] = {
+	&dev_attr_min_microvolts,
+	&dev_attr_max_microvolts,
+	&dev_attr_min_microamps,
+	&dev_attr_max_microamps,
+	&dev_attr_mode,
+};
+
+static int regulator_virtual_consumer_probe(struct platform_device *pdev)
+{
+	char *reg_id = pdev->dev.platform_data;
+	struct virtual_consumer_data *drvdata;
+	int ret, i;
+
+	drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL);
+	if (drvdata == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	mutex_init(&drvdata->lock);
+
+	drvdata->regulator = regulator_get(&pdev->dev, reg_id);
+	if (IS_ERR(drvdata->regulator)) {
+		ret = PTR_ERR(drvdata->regulator);
+		goto err;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(attributes); i++) {
+		ret = device_create_file(&pdev->dev, attributes[i]);
+		if (ret != 0)
+			goto err;
+	}
+
+	drvdata->mode = regulator_get_mode(drvdata->regulator);
+
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
+
+err:
+	for (i = 0; i < ARRAY_SIZE(attributes); i++)
+		device_remove_file(&pdev->dev, attributes[i]);
+	kfree(drvdata);
+	return ret;
+}
+
+static int regulator_virtual_consumer_remove(struct platform_device *pdev)
+{
+	struct virtual_consumer_data *drvdata = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(attributes); i++)
+		device_remove_file(&pdev->dev, attributes[i]);
+	if (drvdata->enabled)
+		regulator_disable(drvdata->regulator);
+	regulator_put(drvdata->regulator);
+
+	kfree(drvdata);
+
+	return 0;
+}
+
+static struct platform_driver regulator_virtual_consumer_driver = {
+	.probe		= regulator_virtual_consumer_probe,
+	.remove		= regulator_virtual_consumer_remove,
+	.driver		= {
+		.name		= "reg-virt-consumer",
+	},
+};
+
+
+static int __init regulator_virtual_consumer_init(void)
+{
+	return platform_driver_register(&regulator_virtual_consumer_driver);
+}
+module_init(regulator_virtual_consumer_init);
+
+static void __exit regulator_virtual_consumer_exit(void)
+{
+	platform_driver_unregister(&regulator_virtual_consumer_driver);
+}
+module_exit(regulator_virtual_consumer_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Virtual regulator consumer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 90ab7382540..9a9755c92fa 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -561,7 +561,7 @@ config RTC_DRV_AT91SAM9_GPBR
 
 config RTC_DRV_BFIN
 	tristate "Blackfin On-Chip RTC"
-	depends on BLACKFIN
+	depends on BLACKFIN && !BF561
 	help
 	  If you say yes here you will get support for the
 	  Blackfin On-Chip Real Time Clock.
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index d397fa5f3a9..7af60b98d8a 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -20,7 +20,7 @@ int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
@@ -46,7 +46,7 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
@@ -66,7 +66,7 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
@@ -106,7 +106,7 @@ static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *al
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (rtc->ops == NULL)
 		err = -ENODEV;
@@ -293,7 +293,7 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index cd32d05db77..4e888cc8be5 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -29,7 +29,7 @@
 #include <linux/completion.h>
 
 #include <asm/uaccess.h>
-#include <asm/arch/at91_rtc.h>
+#include <mach/at91_rtc.h>
 
 
 #define AT91_RTC_FREQ		1
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index f0246ef413a..2133f37906f 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -19,8 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/ioctl.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/at91_rtt.h>
+#include <mach/board.h>
+#include <mach/at91_rtt.h>
 
 
 /*
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 8624f55d056..34439ce3967 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -2,7 +2,7 @@
  * Blackfin On-Chip Real Time Clock Driver
  *  Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789]
  *
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
@@ -32,6 +32,15 @@
  * writes to clear status registers complete immediately.
  */
 
+/* It may seem odd that there is no SWCNT code in here (which would be exposed
+ * via the periodic interrupt event, or PIE).  Since the Blackfin RTC peripheral
+ * runs in units of seconds (N/HZ) but the Linux framework runs in units of HZ
+ * (2^N HZ), there is no point in keeping code that only provides 1 HZ PIEs.
+ * The same exact behavior can be accomplished by using the update interrupt
+ * event (UIE).  Maybe down the line the RTC peripheral will suck less in which
+ * case we can re-introduce PIE support.
+ */
+
 #include <linux/bcd.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
@@ -144,14 +153,13 @@ static void bfin_rtc_sync_pending(struct device *dev)
  * Initialize the RTC.  Enable pre-scaler to scale RTC clock
  * to 1Hz and clear interrupt/status registers.
  */
-static void bfin_rtc_reset(struct device *dev)
+static void bfin_rtc_reset(struct device *dev, u16 rtc_ictl)
 {
 	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 	dev_dbg_stamp(dev);
 	bfin_rtc_sync_pending(dev);
 	bfin_write_RTC_PREN(0x1);
-	bfin_write_RTC_ICTL(RTC_ISTAT_WRITE_COMPLETE);
-	bfin_write_RTC_SWCNT(0);
+	bfin_write_RTC_ICTL(rtc_ictl);
 	bfin_write_RTC_ALARM(0);
 	bfin_write_RTC_ISTAT(0xFFFF);
 	rtc->rtc_wrote_regs = 0;
@@ -194,14 +202,6 @@ static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
 		}
 	}
 
-	if (rtc_ictl & RTC_ISTAT_STOPWATCH) {
-		if (rtc_istat & RTC_ISTAT_STOPWATCH) {
-			bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
-			events |= RTC_PF | RTC_IRQF;
-			bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
-		}
-	}
-
 	if (rtc_ictl & RTC_ISTAT_SEC) {
 		if (rtc_istat & RTC_ISTAT_SEC) {
 			bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
@@ -218,32 +218,12 @@ static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
 		return IRQ_NONE;
 }
 
-static int bfin_rtc_open(struct device *dev)
-{
-	int ret;
-
-	dev_dbg_stamp(dev);
-
-	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, to_platform_device(dev)->name, dev);
-	if (!ret)
-		bfin_rtc_reset(dev);
-
-	return ret;
-}
-
-static void bfin_rtc_release(struct device *dev)
-{
-	dev_dbg_stamp(dev);
-	bfin_rtc_reset(dev);
-	free_irq(IRQ_RTC, dev);
-}
-
-static void bfin_rtc_int_set(struct bfin_rtc *rtc, u16 rtc_int)
+static void bfin_rtc_int_set(u16 rtc_int)
 {
 	bfin_write_RTC_ISTAT(rtc_int);
 	bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | rtc_int);
 }
-static void bfin_rtc_int_clear(struct bfin_rtc *rtc, u16 rtc_int)
+static void bfin_rtc_int_clear(u16 rtc_int)
 {
 	bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & rtc_int);
 }
@@ -252,7 +232,7 @@ static void bfin_rtc_int_set_alarm(struct bfin_rtc *rtc)
 	/* Blackfin has different bits for whether the alarm is
 	 * more than 24 hours away.
 	 */
-	bfin_rtc_int_set(rtc, (rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY));
+	bfin_rtc_int_set(rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY);
 }
 static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
@@ -264,23 +244,13 @@ static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long ar
 	bfin_rtc_sync_pending(dev);
 
 	switch (cmd) {
-	case RTC_PIE_ON:
-		dev_dbg_stamp(dev);
-		bfin_rtc_int_set(rtc, RTC_ISTAT_STOPWATCH);
-		bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
-		break;
-	case RTC_PIE_OFF:
-		dev_dbg_stamp(dev);
-		bfin_rtc_int_clear(rtc, ~RTC_ISTAT_STOPWATCH);
-		break;
-
 	case RTC_UIE_ON:
 		dev_dbg_stamp(dev);
-		bfin_rtc_int_set(rtc, RTC_ISTAT_SEC);
+		bfin_rtc_int_set(RTC_ISTAT_SEC);
 		break;
 	case RTC_UIE_OFF:
 		dev_dbg_stamp(dev);
-		bfin_rtc_int_clear(rtc, ~RTC_ISTAT_SEC);
+		bfin_rtc_int_clear(~RTC_ISTAT_SEC);
 		break;
 
 	case RTC_AIE_ON:
@@ -289,7 +259,7 @@ static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long ar
 		break;
 	case RTC_AIE_OFF:
 		dev_dbg_stamp(dev);
-		bfin_rtc_int_clear(rtc, ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
+		bfin_rtc_int_clear(~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
 		break;
 
 	default:
@@ -371,64 +341,64 @@ static int bfin_rtc_proc(struct device *dev, struct seq_file *seq)
 	seq_printf(seq,
 		"alarm_IRQ\t: %s\n"
 		"wkalarm_IRQ\t: %s\n"
-		"seconds_IRQ\t: %s\n"
-		"periodic_IRQ\t: %s\n",
+		"seconds_IRQ\t: %s\n",
 		yesno(ictl & RTC_ISTAT_ALARM),
 		yesno(ictl & RTC_ISTAT_ALARM_DAY),
-		yesno(ictl & RTC_ISTAT_SEC),
-		yesno(ictl & RTC_ISTAT_STOPWATCH));
+		yesno(ictl & RTC_ISTAT_SEC));
 	return 0;
 #undef yesno
 }
 
-/**
- *	bfin_irq_set_freq - make sure hardware supports requested freq
- *	@dev: pointer to RTC device structure
- *	@freq: requested frequency rate
- *
- *	The Blackfin RTC can only generate periodic events at 1 per
- *	second (1 Hz), so reject any attempt at changing it.
- */
-static int bfin_irq_set_freq(struct device *dev, int freq)
-{
-	dev_dbg_stamp(dev);
-	return -ENOTTY;
-}
-
 static struct rtc_class_ops bfin_rtc_ops = {
-	.open          = bfin_rtc_open,
-	.release       = bfin_rtc_release,
 	.ioctl         = bfin_rtc_ioctl,
 	.read_time     = bfin_rtc_read_time,
 	.set_time      = bfin_rtc_set_time,
 	.read_alarm    = bfin_rtc_read_alarm,
 	.set_alarm     = bfin_rtc_set_alarm,
 	.proc          = bfin_rtc_proc,
-	.irq_set_freq  = bfin_irq_set_freq,
 };
 
 static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 {
 	struct bfin_rtc *rtc;
+	struct device *dev = &pdev->dev;
 	int ret = 0;
+	unsigned long timeout;
 
-	dev_dbg_stamp(&pdev->dev);
+	dev_dbg_stamp(dev);
 
+	/* Allocate memory for our RTC struct */
 	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
 	if (unlikely(!rtc))
 		return -ENOMEM;
+	platform_set_drvdata(pdev, rtc);
+	device_init_wakeup(dev, 1);
 
-	rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc)) {
-		ret = PTR_ERR(rtc->rtc_dev);
+	/* Grab the IRQ and init the hardware */
+	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
+	if (unlikely(ret))
 		goto err;
-	}
-	rtc->rtc_dev->irq_freq = 1;
+	/* sometimes the bootloader touched things, but the write complete was not
+	 * enabled, so let's just do a quick timeout here since the IRQ will not fire ...
+	 */
+	timeout = jiffies + HZ;
+	while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
+		if (time_after(jiffies, timeout))
+			break;
+	bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
+	bfin_write_RTC_SWCNT(0);
 
-	platform_set_drvdata(pdev, rtc);
+	/* Register our RTC with the RTC framework */
+	rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE);
+	if (unlikely(IS_ERR(rtc))) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		goto err_irq;
+	}
 
 	return 0;
 
+ err_irq:
+	free_irq(IRQ_RTC, dev);
  err:
 	kfree(rtc);
 	return ret;
@@ -437,7 +407,10 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 static int __devexit bfin_rtc_remove(struct platform_device *pdev)
 {
 	struct bfin_rtc *rtc = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
 
+	bfin_rtc_reset(dev, 0);
+	free_irq(IRQ_RTC, dev);
 	rtc_device_unregister(rtc->rtc_dev);
 	platform_set_drvdata(pdev, NULL);
 	kfree(rtc);
@@ -445,6 +418,32 @@ static int __devexit bfin_rtc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int bfin_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	if (device_may_wakeup(&pdev->dev)) {
+		enable_irq_wake(IRQ_RTC);
+		bfin_rtc_sync_pending(&pdev->dev);
+	} else
+		bfin_rtc_int_clear(-1);
+
+	return 0;
+}
+
+static int bfin_rtc_resume(struct platform_device *pdev)
+{
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(IRQ_RTC);
+	else
+		bfin_write_RTC_ISTAT(-1);
+
+	return 0;
+}
+#else
+# define bfin_rtc_suspend NULL
+# define bfin_rtc_resume  NULL
+#endif
+
 static struct platform_driver bfin_rtc_driver = {
 	.driver		= {
 		.name	= "rtc-bfin",
@@ -452,6 +451,8 @@ static struct platform_driver bfin_rtc_driver = {
 	},
 	.probe		= bfin_rtc_probe,
 	.remove		= __devexit_p(bfin_rtc_remove),
+	.suspend	= bfin_rtc_suspend,
+	.resume		= bfin_rtc_resume,
 };
 
 static int __init bfin_rtc_init(void)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 6ea349aba3b..b184367637d 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -800,7 +800,6 @@ static void __exit cmos_do_remove(struct device *dev)
 static int cmos_suspend(struct device *dev, pm_message_t mesg)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
-	int		do_wake = device_may_wakeup(dev);
 	unsigned char	tmp;
 
 	/* only the alarm might be a wakeup event source */
@@ -809,7 +808,7 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
 	if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
 		unsigned char	mask;
 
-		if (do_wake)
+		if (device_may_wakeup(dev))
 			mask = RTC_IRQMASK & ~RTC_AIE;
 		else
 			mask = RTC_IRQMASK;
@@ -837,6 +836,17 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
 	return 0;
 }
 
+/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even
+ * after a detour through G3 "mechanical off", although the ACPI spec
+ * says wakeup should only work from G1/S4 "hibernate".  To most users,
+ * distinctions between S4 and S5 are pointless.  So when the hardware
+ * allows, don't draw that distinction.
+ */
+static inline int cmos_poweroff(struct device *dev)
+{
+	return cmos_suspend(dev, PMSG_HIBERNATE);
+}
+
 static int cmos_resume(struct device *dev)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
@@ -884,6 +894,12 @@ static int cmos_resume(struct device *dev)
 #else
 #define	cmos_suspend	NULL
 #define	cmos_resume	NULL
+
+static inline int cmos_poweroff(struct device *dev)
+{
+	return -ENOSYS;
+}
+
 #endif
 
 /*----------------------------------------------------------------*/
@@ -903,10 +919,6 @@ static int cmos_resume(struct device *dev)
 static int __devinit
 cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
 {
-	/* REVISIT paranoia argues for a shutdown notifier, since PNP
-	 * drivers can't provide shutdown() methods to disable IRQs.
-	 * Or better yet, fix PNP to allow those methods...
-	 */
 	if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
 		/* Some machines contain a PNP entry for the RTC, but
 		 * don't define the IRQ. It should always be safe to
@@ -942,6 +954,13 @@ static int cmos_pnp_resume(struct pnp_dev *pnp)
 #define	cmos_pnp_resume		NULL
 #endif
 
+static void cmos_pnp_shutdown(struct device *pdev)
+{
+	if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev))
+		return;
+
+	cmos_do_shutdown();
+}
 
 static const struct pnp_device_id rtc_ids[] = {
 	{ .id = "PNP0b00", },
@@ -961,6 +980,10 @@ static struct pnp_driver cmos_pnp_driver = {
 	.flags		= PNP_DRIVER_RES_DO_NOT_CHANGE,
 	.suspend	= cmos_pnp_suspend,
 	.resume		= cmos_pnp_resume,
+	.driver		= {
+		.name	  = (char *)driver_name,
+		.shutdown = cmos_pnp_shutdown,
+	}
 };
 
 #endif	/* CONFIG_PNP */
@@ -986,6 +1009,9 @@ static int __exit cmos_platform_remove(struct platform_device *pdev)
 
 static void cmos_platform_shutdown(struct platform_device *pdev)
 {
+	if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pdev->dev))
+		return;
+
 	cmos_do_shutdown();
 }
 
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 0a870b7e5c3..f118252f3a9 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -13,7 +13,6 @@
 
 #include <linux/module.h>
 #include <linux/rtc.h>
-#include <linux/smp_lock.h>
 #include "rtc-core.h"
 
 static dev_t rtc_devt;
@@ -27,11 +26,8 @@ static int rtc_dev_open(struct inode *inode, struct file *file)
 					struct rtc_device, char_dev);
 	const struct rtc_class_ops *ops = rtc->ops;
 
-	lock_kernel();
-	if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags)) {
-		err = -EBUSY;
-		goto out;
-	}
+	if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags))
+		return -EBUSY;
 
 	file->private_data = rtc;
 
@@ -41,13 +37,11 @@ static int rtc_dev_open(struct inode *inode, struct file *file)
 		rtc->irq_data = 0;
 		spin_unlock_irq(&rtc->irq_lock);
 
-		goto out;
+		return 0;
 	}
 
 	/* something has gone wrong */
 	clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
-out:
-	unlock_kernel();
 	return err;
 }
 
@@ -221,7 +215,7 @@ static long rtc_dev_ioctl(struct file *file,
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	/* check that the calling task has appropriate permissions
 	 * for certain ioctls. doing this check here is useful
@@ -409,11 +403,14 @@ static long rtc_dev_ioctl(struct file *file,
 
 #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
 	case RTC_UIE_OFF:
+		mutex_unlock(&rtc->ops_lock);
 		clear_uie(rtc);
-		break;
+		return 0;
 
 	case RTC_UIE_ON:
+		mutex_unlock(&rtc->ops_lock);
 		err = set_uie(rtc);
+		return err;
 #endif
 	default:
 		err = -ENOTTY;
@@ -432,6 +429,8 @@ static int rtc_dev_release(struct inode *inode, struct file *file)
 #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
 	clear_uie(rtc);
 #endif
+	rtc_irq_set_state(rtc, NULL, 0);
+
 	if (rtc->ops->release)
 		rtc->ops->release(rtc->dev.parent);
 
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 640acd20fdd..a150418fba7 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -173,7 +173,7 @@ static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	int cr, sr;
 	int ret = 0;
 
-	if (client->irq < 0)
+	if (client->irq <= 0)
 		return -EINVAL;
 
 	mutex_lock(&ds1374->mutex);
@@ -212,7 +212,7 @@ static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	int cr;
 	int ret = 0;
 
-	if (client->irq < 0)
+	if (client->irq <= 0)
 		return -EINVAL;
 
 	ret = ds1374_read_time(dev, &now);
@@ -381,7 +381,7 @@ static int ds1374_probe(struct i2c_client *client,
 	if (ret)
 		goto out_free;
 
-	if (client->irq >= 0) {
+	if (client->irq > 0) {
 		ret = request_irq(client->irq, ds1374_irq, 0,
 		                  "ds1374", client);
 		if (ret) {
@@ -401,7 +401,7 @@ static int ds1374_probe(struct i2c_client *client,
 	return 0;
 
 out_irq:
-	if (client->irq >= 0)
+	if (client->irq > 0)
 		free_irq(client->irq, client);
 
 out_free:
@@ -414,7 +414,7 @@ static int __devexit ds1374_remove(struct i2c_client *client)
 {
 	struct ds1374 *ds1374 = i2c_get_clientdata(client);
 
-	if (client->irq >= 0) {
+	if (client->irq > 0) {
 		mutex_lock(&ds1374->mutex);
 		ds1374->exiting = 1;
 		mutex_unlock(&ds1374->mutex);
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index 1e99325270d..36e4ac0bd69 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define EP93XX_RTC_REG(x)	(EP93XX_RTC_BASE + (x))
 #define EP93XX_RTC_DATA		EP93XX_RTC_REG(0x0000)
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index fbb90b1e409..a81adab6e51 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -482,7 +482,7 @@ isl1208_sysfs_register(struct device *dev)
 static int
 isl1208_sysfs_unregister(struct device *dev)
 {
-	device_remove_file(dev, &dev_attr_atrim);
+	device_remove_file(dev, &dev_attr_dtrim);
 	device_remove_file(dev, &dev_attr_atrim);
 	device_remove_file(dev, &dev_attr_usr);
 
diff --git a/drivers/rtc/rtc-lib.c b/drivers/rtc/rtc-lib.c
index 9f996ec881c..dd70bf73ce9 100644
--- a/drivers/rtc/rtc-lib.c
+++ b/drivers/rtc/rtc-lib.c
@@ -51,10 +51,11 @@ EXPORT_SYMBOL(rtc_year_days);
  */
 void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
 {
-	unsigned int days, month, year;
+	unsigned int month, year;
+	int days;
 
 	days = time / 86400;
-	time -= days * 86400;
+	time -= (unsigned int) days * 86400;
 
 	/* day of the week, 1970-01-01 was a Thursday */
 	tm->tm_wday = (days + 4) % 7;
diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c
index 12f0310ae89..78b2551fb19 100644
--- a/drivers/rtc/rtc-max6902.c
+++ b/drivers/rtc/rtc-max6902.c
@@ -20,8 +20,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
-
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
diff --git a/drivers/rtc/rtc-r9701.c b/drivers/rtc/rtc-r9701.c
index b35f9bfa2af..395985b339c 100644
--- a/drivers/rtc/rtc-r9701.c
+++ b/drivers/rtc/rtc-r9701.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/device.h>
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 54b1ebb0150..e7d19b6c265 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -22,7 +22,7 @@
 #include <linux/clk.h>
 #include <linux/log2.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index f47294c6014..66a9bb85bbe 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -31,11 +31,11 @@
 #include <linux/pm.h>
 #include <linux/bitops.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #endif
 
 #define TIMER_FREQ		CLOCK_TICK_RATE
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 1b6c52ef733..acb78017e7d 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2333,13 +2333,11 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 {
 	struct dasd_device *device;
 	struct dasd_ccw_req *cqr;
-	unsigned long flags;
 	int ret;
 
-	device = dasd_device_from_cdev(cdev);
+	device = dasd_device_from_cdev_locked(cdev);
 	if (IS_ERR(device))
 		return 0;
-	spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
 	ret = 0;
 	switch (event) {
 	case CIO_GONE:
@@ -2369,7 +2367,6 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 		ret = 1;
 		break;
 	}
-	spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
 	dasd_put_device(device);
 	return ret;
 }
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 2d8df0b3053..20676cdef4a 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -91,7 +91,8 @@ static struct alias_pav_group *_find_group(struct alias_lcu *lcu,
 	else
 		search_unit_addr = uid->base_unit_addr;
 	list_for_each_entry(pos, &lcu->grouplist, group) {
-		if (pos->uid.base_unit_addr == search_unit_addr)
+		if (pos->uid.base_unit_addr == search_unit_addr &&
+		    !strncmp(pos->uid.vduit, uid->vduit, sizeof(uid->vduit)))
 			return pos;
 	};
 	return NULL;
@@ -332,6 +333,7 @@ static int _add_device_to_lcu(struct alias_lcu *lcu,
 			group->uid.base_unit_addr = uid->real_unit_addr;
 		else
 			group->uid.base_unit_addr = uid->base_unit_addr;
+		memcpy(group->uid.vduit, uid->vduit, sizeof(uid->vduit));
 		INIT_LIST_HEAD(&group->group);
 		INIT_LIST_HEAD(&group->baselist);
 		INIT_LIST_HEAD(&group->aliaslist);
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index d774e79476f..cd3335c1c30 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -913,7 +913,8 @@ dasd_vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
 static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL);
 
 #define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial    */ 14 + 1 +\
-		     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1)
+		     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1 +\
+		     /* vduit */ 32 + 1)
 
 static ssize_t
 dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -945,8 +946,17 @@ dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
 		sprintf(ua_string, "%02x", uid->real_unit_addr);
 		break;
 	}
-	snprintf(uid_string, sizeof(uid_string), "%s.%s.%04x.%s",
-		 uid->vendor, uid->serial, uid->ssid, ua_string);
+	if (strlen(uid->vduit) > 0)
+		snprintf(uid_string, sizeof(uid_string),
+			 "%s.%s.%04x.%s.%s",
+			 uid->vendor, uid->serial,
+			 uid->ssid, ua_string,
+			 uid->vduit);
+	else
+		snprintf(uid_string, sizeof(uid_string),
+			 "%s.%s.%04x.%s",
+			 uid->vendor, uid->serial,
+			 uid->ssid, ua_string);
 	spin_unlock(&dasd_devmap_lock);
 	return snprintf(buf, PAGE_SIZE, "%s\n", uid_string);
 }
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 3590fdb5b2f..773b3fe275b 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -313,8 +313,8 @@ static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata, int trk,
 	memset(pfxdata, 0, sizeof(*pfxdata));
 	/* prefix data */
 	pfxdata->format = 0;
-	pfxdata->base_address = basepriv->conf_data.ned1.unit_addr;
-	pfxdata->base_lss = basepriv->conf_data.ned1.ID;
+	pfxdata->base_address = basepriv->ned->unit_addr;
+	pfxdata->base_lss = basepriv->ned->ID;
 	pfxdata->validity.define_extend = 1;
 
 	/* private uid is kept up to date, conf_data may be outdated */
@@ -536,36 +536,40 @@ dasd_eckd_cdl_reclen(int recid)
 /*
  * Generate device unique id that specifies the physical device.
  */
-static int
-dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid)
+static int dasd_eckd_generate_uid(struct dasd_device *device,
+				  struct dasd_uid *uid)
 {
 	struct dasd_eckd_private *private;
-	struct dasd_eckd_confdata *confdata;
+	int count;
 
 	private = (struct dasd_eckd_private *) device->private;
 	if (!private)
 		return -ENODEV;
-	confdata = &private->conf_data;
-	if (!confdata)
+	if (!private->ned || !private->gneq)
 		return -ENODEV;
 
 	memset(uid, 0, sizeof(struct dasd_uid));
-	memcpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+	memcpy(uid->vendor, private->ned->HDA_manufacturer,
 	       sizeof(uid->vendor) - 1);
 	EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
-	memcpy(uid->serial, confdata->ned1.HDA_location,
+	memcpy(uid->serial, private->ned->HDA_location,
 	       sizeof(uid->serial) - 1);
 	EBCASC(uid->serial, sizeof(uid->serial) - 1);
-	uid->ssid = confdata->neq.subsystemID;
-	uid->real_unit_addr = confdata->ned1.unit_addr;
-	if (confdata->ned2.sneq.flags == 0x40 &&
-	    confdata->ned2.sneq.format == 0x0001) {
-		uid->type = confdata->ned2.sneq.sua_flags;
+	uid->ssid = private->gneq->subsystemID;
+	uid->real_unit_addr = private->ned->unit_addr;;
+	if (private->sneq) {
+		uid->type = private->sneq->sua_flags;
 		if (uid->type == UA_BASE_PAV_ALIAS)
-			uid->base_unit_addr = confdata->ned2.sneq.base_unit_addr;
+			uid->base_unit_addr = private->sneq->base_unit_addr;
 	} else {
 		uid->type = UA_BASE_DEVICE;
 	}
+	if (private->vdsneq) {
+		for (count = 0; count < 16; count++) {
+			sprintf(uid->vduit+2*count, "%02x",
+				private->vdsneq->uit[count]);
+		}
+	}
 	return 0;
 }
 
@@ -623,6 +627,15 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device,
 		ret = -ENOMEM;
 		goto out_error;
 	}
+
+	/*
+	 * buffer has to start with EBCDIC "V1.0" to show
+	 * support for virtual device SNEQ
+	 */
+	rcd_buf[0] = 0xE5;
+	rcd_buf[1] = 0xF1;
+	rcd_buf[2] = 0x4B;
+	rcd_buf[3] = 0xF0;
 	cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm);
 	if (IS_ERR(cqr)) {
 		ret =  PTR_ERR(cqr);
@@ -646,8 +659,62 @@ out_error:
 	return ret;
 }
 
-static int
-dasd_eckd_read_conf(struct dasd_device *device)
+static int dasd_eckd_identify_conf_parts(struct dasd_eckd_private *private)
+{
+
+	struct dasd_sneq *sneq;
+	int i, count;
+
+	private->ned = NULL;
+	private->sneq = NULL;
+	private->vdsneq = NULL;
+	private->gneq = NULL;
+	count = private->conf_len / sizeof(struct dasd_sneq);
+	sneq = (struct dasd_sneq *)private->conf_data;
+	for (i = 0; i < count; ++i) {
+		if (sneq->flags.identifier == 1 && sneq->format == 1)
+			private->sneq = sneq;
+		else if (sneq->flags.identifier == 1 && sneq->format == 4)
+			private->vdsneq = (struct vd_sneq *)sneq;
+		else if (sneq->flags.identifier == 2)
+			private->gneq = (struct dasd_gneq *)sneq;
+		else if (sneq->flags.identifier == 3 && sneq->res1 == 1)
+			private->ned = (struct dasd_ned *)sneq;
+		sneq++;
+	}
+	if (!private->ned || !private->gneq) {
+		private->ned = NULL;
+		private->sneq = NULL;
+		private->vdsneq = NULL;
+		private->gneq = NULL;
+		return -EINVAL;
+	}
+	return 0;
+
+};
+
+static unsigned char dasd_eckd_path_access(void *conf_data, int conf_len)
+{
+	struct dasd_gneq *gneq;
+	int i, count, found;
+
+	count = conf_len / sizeof(*gneq);
+	gneq = (struct dasd_gneq *)conf_data;
+	found = 0;
+	for (i = 0; i < count; ++i) {
+		if (gneq->flags.identifier == 2) {
+			found = 1;
+			break;
+		}
+		gneq++;
+	}
+	if (found)
+		return ((char *)gneq)[18] & 0x07;
+	else
+		return 0;
+}
+
+static int dasd_eckd_read_conf(struct dasd_device *device)
 {
 	void *conf_data;
 	int conf_len, conf_data_saved;
@@ -661,7 +728,6 @@ dasd_eckd_read_conf(struct dasd_device *device)
 	path_data->opm = ccw_device_get_path_mask(device->cdev);
 	lpm = 0x80;
 	conf_data_saved = 0;
-
 	/* get configuration data per operational path */
 	for (lpm = 0x80; lpm; lpm>>= 1) {
 		if (lpm & path_data->opm){
@@ -678,22 +744,20 @@ dasd_eckd_read_conf(struct dasd_device *device)
 					"data retrieved");
 				continue;	/* no error */
 			}
-			if (conf_len != sizeof(struct dasd_eckd_confdata)) {
-				MESSAGE(KERN_WARNING,
-					"sizes of configuration data mismatch"
-					"%d (read) vs %ld (expected)",
-					conf_len,
-					sizeof(struct dasd_eckd_confdata));
-				kfree(conf_data);
-				continue;	/* no error */
-			}
 			/* save first valid configuration data */
-			if (!conf_data_saved){
-				memcpy(&private->conf_data, conf_data,
-				       sizeof(struct dasd_eckd_confdata));
+			if (!conf_data_saved) {
+				kfree(private->conf_data);
+				private->conf_data = conf_data;
+				private->conf_len = conf_len;
+				if (dasd_eckd_identify_conf_parts(private)) {
+					private->conf_data = NULL;
+					private->conf_len = 0;
+					kfree(conf_data);
+					continue;
+				}
 				conf_data_saved++;
 			}
-			switch (((char *)conf_data)[242] & 0x07){
+			switch (dasd_eckd_path_access(conf_data, conf_len)) {
 			case 0x02:
 				path_data->npm |= lpm;
 				break;
@@ -701,7 +765,8 @@ dasd_eckd_read_conf(struct dasd_device *device)
 				path_data->ppm |= lpm;
 				break;
 			}
-			kfree(conf_data);
+			if (conf_data != private->conf_data)
+				kfree(conf_data);
 		}
 	}
 	return 0;
@@ -952,6 +1017,7 @@ out_err2:
 	dasd_free_block(device->block);
 	device->block = NULL;
 out_err1:
+	kfree(private->conf_data);
 	kfree(device->private);
 	device->private = NULL;
 	return rc;
@@ -959,7 +1025,17 @@ out_err1:
 
 static void dasd_eckd_uncheck_device(struct dasd_device *device)
 {
+	struct dasd_eckd_private *private;
+
+	private = (struct dasd_eckd_private *) device->private;
 	dasd_alias_disconnect_device_from_lcu(device);
+	private->ned = NULL;
+	private->sneq = NULL;
+	private->vdsneq = NULL;
+	private->gneq = NULL;
+	private->conf_len = 0;
+	kfree(private->conf_data);
+	private->conf_data = NULL;
 }
 
 static struct dasd_ccw_req *
@@ -1746,9 +1822,10 @@ dasd_eckd_fill_info(struct dasd_device * device,
 	info->characteristics_size = sizeof(struct dasd_eckd_characteristics);
 	memcpy(info->characteristics, &private->rdc_data,
 	       sizeof(struct dasd_eckd_characteristics));
-	info->confdata_size = sizeof(struct dasd_eckd_confdata);
-	memcpy(info->configuration_data, &private->conf_data,
-	       sizeof(struct dasd_eckd_confdata));
+	info->confdata_size = min((unsigned long)private->conf_len,
+				  sizeof(info->configuration_data));
+	memcpy(info->configuration_data, private->conf_data,
+	       info->confdata_size);
 	return 0;
 }
 
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index fc2509c939b..2476f87d21d 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -231,133 +231,62 @@ struct dasd_eckd_characteristics {
 	__u8 reserved3[10];
 } __attribute__ ((packed));
 
-struct dasd_eckd_confdata {
+/* elements of the configuration data */
+struct dasd_ned {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 dev_class;
-		__u8 reserved;
-		unsigned char dev_type[6];
-		unsigned char dev_model[3];
-		unsigned char HDA_manufacturer[3];
-		unsigned char HDA_location[2];
-		unsigned char HDA_seqno[12];
-		__u8 ID;
-		__u8 unit_addr;
-	} __attribute__ ((packed)) ned1;
-	union {
-		struct {
-			struct {
-				unsigned char identifier:2;
-				unsigned char token_id:1;
-				unsigned char sno_valid:1;
-				unsigned char subst_sno:1;
-				unsigned char recNED:1;
-				unsigned char emuNED:1;
-				unsigned char reserved:1;
-			} __attribute__ ((packed)) flags;
-			__u8 descriptor;
-			__u8 reserved[2];
-			unsigned char dev_type[6];
-			unsigned char dev_model[3];
-			unsigned char DASD_manufacturer[3];
-			unsigned char DASD_location[2];
-			unsigned char DASD_seqno[12];
-			__u16 ID;
-		} __attribute__ ((packed)) ned;
-		struct {
-			unsigned char flags;            /* byte  0    */
-			unsigned char res1;		/* byte  1    */
-			__u16 format;			/* byte  2-3  */
-			unsigned char res2[4];		/* byte  4-7  */
-			unsigned char sua_flags;	/* byte  8    */
-			__u8 base_unit_addr;            /* byte  9    */
-			unsigned char res3[22];	        /* byte 10-31 */
-		} __attribute__ ((packed)) sneq;
-	} __attribute__ ((packed)) ned2;
+		__u8 identifier:2;
+		__u8 token_id:1;
+		__u8 sno_valid:1;
+		__u8 subst_sno:1;
+		__u8 recNED:1;
+		__u8 emuNED:1;
+		__u8 reserved:1;
+	} __attribute__ ((packed)) flags;
+	__u8 descriptor;
+	__u8 dev_class;
+	__u8 reserved;
+	__u8 dev_type[6];
+	__u8 dev_model[3];
+	__u8 HDA_manufacturer[3];
+	__u8 HDA_location[2];
+	__u8 HDA_seqno[12];
+	__u8 ID;
+	__u8 unit_addr;
+} __attribute__ ((packed));
+
+struct dasd_sneq {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 reserved[2];
-		unsigned char cont_type[6];
-		unsigned char cont_model[3];
-		unsigned char cont_manufacturer[3];
-		unsigned char cont_location[2];
-		unsigned char cont_seqno[12];
-		__u16 ID;
-	} __attribute__ ((packed)) ned3;
+		__u8 identifier:2;
+		__u8 reserved:6;
+	} __attribute__ ((packed)) flags;
+	__u8 res1;
+	__u16 format;
+	__u8 res2[4];		/* byte  4- 7 */
+	__u8 sua_flags;		/* byte  8    */
+	__u8 base_unit_addr;	/* byte  9    */
+	__u8 res3[22];		/* byte 10-31 */
+} __attribute__ ((packed));
+
+struct vd_sneq {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 reserved[2];
-		unsigned char cont_type[6];
-		unsigned char empty[3];
-		unsigned char cont_manufacturer[3];
-		unsigned char cont_location[2];
-		unsigned char cont_seqno[12];
-		__u16 ID;
-	} __attribute__ ((packed)) ned4;
-	unsigned char ned5[32];
-	unsigned char ned6[32];
-	unsigned char ned7[32];
+		__u8 identifier:2;
+		__u8 reserved:6;
+	} __attribute__ ((packed)) flags;
+	__u8 res1;
+	__u16 format;
+	__u8 res2[4];	/* byte  4- 7 */
+	__u8 uit[16];	/* byte  8-23 */
+	__u8 res3[8];	/* byte 24-31 */
+} __attribute__ ((packed));
+
+struct dasd_gneq {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char reserved:6;
-		} __attribute__ ((packed)) flags;
-		__u8 selector;
-		__u16 interfaceID;
-		__u32 reserved;
-		__u16 subsystemID;
-		struct {
-			unsigned char sp0:1;
-			unsigned char sp1:1;
-			unsigned char reserved:5;
-			unsigned char scluster:1;
-		} __attribute__ ((packed)) spathID;
-		__u8 unit_address;
-		__u8 dev_ID;
-		__u8 dev_address;
-		__u8 adapterID;
-		__u16 link_address;
-		struct {
-			unsigned char parallel:1;
-			unsigned char escon:1;
-			unsigned char reserved:1;
-			unsigned char ficon:1;
-			unsigned char reserved2:4;
-		} __attribute__ ((packed)) protocol_type;
-		struct {
-			unsigned char PID_in_236:1;
-			unsigned char reserved:7;
-		} __attribute__ ((packed)) format_flags;
-		__u8 log_dev_address;
-		unsigned char reserved2[12];
-	} __attribute__ ((packed)) neq;
+		__u8 identifier:2;
+		__u8 reserved:6;
+	} __attribute__ ((packed)) flags;
+	__u8 reserved[7];
+	__u16 subsystemID;
+	__u8 reserved2[22];
 } __attribute__ ((packed));
 
 struct dasd_eckd_path {
@@ -379,7 +308,7 @@ struct dasd_psf_prssd_data {
 	unsigned char flags;
 	unsigned char reserved[4];
 	unsigned char suborder;
-	unsigned char varies[9];
+	unsigned char varies[5];
 } __attribute__ ((packed));
 
 /*
@@ -463,7 +392,14 @@ struct alias_pav_group {
 
 struct dasd_eckd_private {
 	struct dasd_eckd_characteristics rdc_data;
-	struct dasd_eckd_confdata conf_data;
+	u8 *conf_data;
+	int conf_len;
+	/* pointers to specific parts in the conf_data */
+	struct dasd_ned *ned;
+	struct dasd_sneq *sneq;
+	struct vd_sneq *vdsneq;
+	struct dasd_gneq *gneq;
+
 	struct dasd_eckd_path path_data;
 	struct eckd_count count_area[5];
 	int init_cqr_status;
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index 29da4413ad4..bf512ac75b9 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -16,6 +16,7 @@
 #include <linux/poll.h>
 #include <linux/mutex.h>
 #include <linux/smp_lock.h>
+#include <linux/err.h>
 
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
@@ -457,7 +458,7 @@ int dasd_eer_enable(struct dasd_device *device)
 
 	cqr = dasd_kmalloc_request("ECKD", 1 /* SNSS */,
 				   SNSS_DATA_SIZE, device);
-	if (!cqr)
+	if (IS_ERR(cqr))
 		return -ENOMEM;
 
 	cqr->startdev = device;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index fb2f931cf84..31ecaa4a40e 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -307,6 +307,7 @@ struct dasd_uid {
 	__u16 ssid;
 	__u8 real_unit_addr;
 	__u8 base_unit_addr;
+	char vduit[33];
 };
 
 /*
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 01fcdd91b84..711b3004b3e 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -384,6 +384,11 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
 	 * get minor, add to list
 	 */
 	down_write(&dcssblk_devices_sem);
+	if (dcssblk_get_device_by_name(local_buf)) {
+		up_write(&dcssblk_devices_sem);
+		rc = -EEXIST;
+		goto unload_seg;
+	}
 	rc = dcssblk_assign_free_minor(dev_info);
 	if (rc) {
 		up_write(&dcssblk_devices_sem);
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 3c8b25e6c34..1fd8f2193ed 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -399,6 +399,7 @@ sclp_tod_from_jiffies(unsigned long jiffies)
 void
 sclp_sync_wait(void)
 {
+	unsigned long long old_tick;
 	unsigned long flags;
 	unsigned long cr0, cr0_sync;
 	u64 timeout;
@@ -419,11 +420,12 @@ sclp_sync_wait(void)
 	if (!irq_context)
 		local_bh_disable();
 	/* Enable service-signal interruption, disable timer interrupts */
+	old_tick = local_tick_disable();
 	trace_hardirqs_on();
 	__ctl_store(cr0, 0, 0);
 	cr0_sync = cr0;
+	cr0_sync &= 0xffff00a0;
 	cr0_sync |= 0x00000200;
-	cr0_sync &= 0xFFFFF3AC;
 	__ctl_load(cr0_sync, 0, 0);
 	__raw_local_irq_stosm(0x01);
 	/* Loop until driver state indicates finished request */
@@ -439,9 +441,9 @@ sclp_sync_wait(void)
 	__ctl_load(cr0, 0, 0);
 	if (!irq_context)
 		_local_bh_enable();
+	local_tick_enable(old_tick);
 	local_irq_restore(flags);
 }
-
 EXPORT_SYMBOL(sclp_sync_wait);
 
 /* Dispatch changes in send and receive mask to registered listeners. */
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 0c2b77493db..eb5f1b8bc57 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -427,6 +427,8 @@ static int sclp_mem_notifier(struct notifier_block *nb,
 			sclp_attach_storage(id);
 	switch (action) {
 	case MEM_ONLINE:
+	case MEM_GOING_OFFLINE:
+	case MEM_CANCEL_OFFLINE:
 		break;
 	case MEM_GOING_ONLINE:
 		rc = sclp_mem_change_state(start, size, 1);
@@ -434,6 +436,9 @@ static int sclp_mem_notifier(struct notifier_block *nb,
 	case MEM_CANCEL_ONLINE:
 		sclp_mem_change_state(start, size, 0);
 		break;
+	case MEM_OFFLINE:
+		sclp_mem_change_state(start, size, 0);
+		break;
 	default:
 		rc = -EINVAL;
 		break;
diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c
index fff4ff485d9..4cebd6ee6d2 100644
--- a/drivers/s390/char/sclp_config.c
+++ b/drivers/s390/char/sclp_config.c
@@ -8,7 +8,6 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/cpu.h>
-#include <linux/kthread.h>
 #include <linux/sysdev.h>
 #include <linux/workqueue.h>
 #include <asm/smp.h>
@@ -41,19 +40,9 @@ static void sclp_cpu_capability_notify(struct work_struct *work)
 	put_online_cpus();
 }
 
-static int sclp_cpu_kthread(void *data)
-{
-	smp_rescan_cpus();
-	return 0;
-}
-
 static void __ref sclp_cpu_change_notify(struct work_struct *work)
 {
-	/* Can't call smp_rescan_cpus() from  workqueue context since it may
-	 * deadlock in case of cpu hotplug. So we have to create a kernel
-	 * thread in order to call it.
-	 */
-	kthread_run(sclp_cpu_kthread, NULL, "cpu_rescan");
+	smp_rescan_cpus();
 }
 
 static void sclp_conf_receiver_fn(struct evbuf_header *evbuf)
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index 687720b552d..be0ce2215c8 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -109,7 +109,7 @@ tapechar_check_idalbuffer(struct tape_device *device, size_t block_size)
 
 	/* The current idal buffer is not correct. Allocate a new one. */
 	new = idal_buffer_alloc(block_size, 0);
-	if (new == NULL)
+	if (IS_ERR(new))
 		return -ENOMEM;
 
 	if (device->char_data.idal_buf != NULL)
diff --git a/drivers/s390/char/tape_std.c b/drivers/s390/char/tape_std.c
index 2a1af4e60be..cc8fd781ee2 100644
--- a/drivers/s390/char/tape_std.c
+++ b/drivers/s390/char/tape_std.c
@@ -248,7 +248,7 @@ tape_std_mtsetblk(struct tape_device *device, int count)
 
 	/* Allocate a new idal buffer. */
 	new = idal_buffer_alloc(count, 0);
-	if (new == NULL)
+	if (IS_ERR(new))
 		return -ENOMEM;
 	if (device->char_data.idal_buf != NULL)
 		idal_buffer_free(device->char_data.idal_buf);
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 26a930e832b..9a50f245774 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -112,8 +112,11 @@ ccwgroup_release (struct device *dev)
 	gdev = to_ccwgroupdev(dev);
 
 	for (i = 0; i < gdev->count; i++) {
-		dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
-		put_device(&gdev->cdev[i]->dev);
+		if (gdev->cdev[i]) {
+			if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
+				dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+			put_device(&gdev->cdev[i]->dev);
+		}
 	}
 	kfree(gdev);
 }
@@ -221,6 +224,13 @@ int ccwgroup_create_from_string(struct device *root, unsigned int creator_id,
 	atomic_set(&gdev->onoff, 0);
 	mutex_init(&gdev->reg_mutex);
 	mutex_lock(&gdev->reg_mutex);
+	gdev->creator_id = creator_id;
+	gdev->count = num_devices;
+	gdev->dev.bus = &ccwgroup_bus_type;
+	gdev->dev.parent = root;
+	gdev->dev.release = ccwgroup_release;
+	device_initialize(&gdev->dev);
+
 	curr_buf = buf;
 	for (i = 0; i < num_devices && curr_buf; i++) {
 		rc = __get_next_bus_id(&curr_buf, tmp_bus_id);
@@ -258,16 +268,11 @@ int ccwgroup_create_from_string(struct device *root, unsigned int creator_id,
 		rc = -EINVAL;
 		goto error;
 	}
-	gdev->creator_id = creator_id;
-	gdev->count = num_devices;
-	gdev->dev.bus = &ccwgroup_bus_type;
-	gdev->dev.parent = root;
-	gdev->dev.release = ccwgroup_release;
 
 	snprintf (gdev->dev.bus_id, BUS_ID_SIZE, "%s",
 			gdev->cdev[0]->dev.bus_id);
 
-	rc = device_register(&gdev->dev);
+	rc = device_add(&gdev->dev);
 	if (rc)
 		goto error;
 	get_device(&gdev->dev);
@@ -292,6 +297,7 @@ error:
 			if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
 				dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
 			put_device(&gdev->cdev[i]->dev);
+			gdev->cdev[i] = NULL;
 		}
 	mutex_unlock(&gdev->reg_mutex);
 	put_device(&gdev->dev);
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index db00b059173..f1216cf6fa8 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -423,7 +423,7 @@ int chp_new(struct chp_id chpid)
 	ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
 	if (ret) {
 		device_unregister(&chp->dev);
-		goto out_free;
+		goto out;
 	}
 	mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
 	if (channel_subsystems[chpid.cssid]->cm_enabled) {
@@ -432,14 +432,15 @@ int chp_new(struct chp_id chpid)
 			sysfs_remove_group(&chp->dev.kobj, &chp_attr_group);
 			device_unregister(&chp->dev);
 			mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
-			goto out_free;
+			goto out;
 		}
 	}
 	channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
 	mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
-	return ret;
+	goto out;
 out_free:
 	kfree(chp);
+out:
 	return ret;
 }
 
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 33bff8fec7d..326f4cc7f92 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -174,6 +174,7 @@ cio_start_key (struct subchannel *sch,	/* subchannel structure */
 	CIO_TRACE_EVENT(4, sch->dev.bus_id);
 
 	orb = &to_io_private(sch)->orb;
+	memset(orb, 0, sizeof(union orb));
 	/* sch is always under 2G. */
 	orb->cmd.intparm = (u32)(addr_t)sch;
 	orb->cmd.fmt = 1;
@@ -208,8 +209,10 @@ cio_start_key (struct subchannel *sch,	/* subchannel structure */
 	case 1:		/* status pending */
 	case 2:		/* busy */
 		return -EBUSY;
-	default:		/* device/path not operational */
+	case 3:		/* device/path not operational */
 		return cio_start_handle_notoper(sch, lpm);
+	default:
+		return ccode;
 	}
 }
 
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 46c021d880d..1261e1a9e8c 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -477,7 +477,6 @@ void css_schedule_eval_all(void)
 
 void css_wait_for_slow_path(void)
 {
-	flush_workqueue(ccw_device_notify_work);
 	flush_workqueue(slow_path_wq);
 }
 
@@ -634,6 +633,11 @@ channel_subsystem_release(struct device *dev)
 
 	css = to_css(dev);
 	mutex_destroy(&css->mutex);
+	if (css->pseudo_subchannel) {
+		/* Implies that it has been generated but never registered. */
+		css_subchannel_release(&css->pseudo_subchannel->dev);
+		css->pseudo_subchannel = NULL;
+	}
 	kfree(css);
 }
 
@@ -786,11 +790,15 @@ init_channel_subsystem (void)
 		}
 		channel_subsystems[i] = css;
 		ret = setup_css(i);
-		if (ret)
-			goto out_free;
+		if (ret) {
+			kfree(channel_subsystems[i]);
+			goto out_unregister;
+		}
 		ret = device_register(&css->device);
-		if (ret)
-			goto out_free_all;
+		if (ret) {
+			put_device(&css->device);
+			goto out_unregister;
+		}
 		if (css_chsc_characteristics.secm) {
 			ret = device_create_file(&css->device,
 						 &dev_attr_cm_enable);
@@ -803,7 +811,7 @@ init_channel_subsystem (void)
 	}
 	ret = register_reboot_notifier(&css_reboot_notifier);
 	if (ret)
-		goto out_pseudo;
+		goto out_unregister;
 	css_init_done = 1;
 
 	/* Enable default isc for I/O subchannels. */
@@ -811,18 +819,12 @@ init_channel_subsystem (void)
 
 	for_each_subchannel(__init_channel_subsystem, NULL);
 	return 0;
-out_pseudo:
-	device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev);
 out_file:
-	device_remove_file(&channel_subsystems[i]->device,
-			   &dev_attr_cm_enable);
+	if (css_chsc_characteristics.secm)
+		device_remove_file(&channel_subsystems[i]->device,
+				   &dev_attr_cm_enable);
 out_device:
 	device_unregister(&channel_subsystems[i]->device);
-out_free_all:
-	kfree(channel_subsystems[i]->pseudo_subchannel->lock);
-	kfree(channel_subsystems[i]->pseudo_subchannel);
-out_free:
-	kfree(channel_subsystems[i]);
 out_unregister:
 	while (i > 0) {
 		struct channel_subsystem *css;
@@ -830,6 +832,7 @@ out_unregister:
 		i--;
 		css = channel_subsystems[i];
 		device_unregister(&css->pseudo_subchannel->dev);
+		css->pseudo_subchannel = NULL;
 		if (css_chsc_characteristics.secm)
 			device_remove_file(&css->device,
 					   &dev_attr_cm_enable);
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index e818d0c54c0..28221030b88 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -150,7 +150,6 @@ static struct css_driver io_subchannel_driver = {
 };
 
 struct workqueue_struct *ccw_device_work;
-struct workqueue_struct *ccw_device_notify_work;
 wait_queue_head_t ccw_device_init_wq;
 atomic_t ccw_device_init_count;
 
@@ -168,11 +167,6 @@ init_ccw_bus_type (void)
 	ccw_device_work = create_singlethread_workqueue("cio");
 	if (!ccw_device_work)
 		return -ENOMEM; /* FIXME: better errno ? */
-	ccw_device_notify_work = create_singlethread_workqueue("cio_notify");
-	if (!ccw_device_notify_work) {
-		ret = -ENOMEM; /* FIXME: better errno ? */
-		goto out_err;
-	}
 	slow_path_wq = create_singlethread_workqueue("kslowcrw");
 	if (!slow_path_wq) {
 		ret = -ENOMEM; /* FIXME: better errno ? */
@@ -192,8 +186,6 @@ init_ccw_bus_type (void)
 out_err:
 	if (ccw_device_work)
 		destroy_workqueue(ccw_device_work);
-	if (ccw_device_notify_work)
-		destroy_workqueue(ccw_device_notify_work);
 	if (slow_path_wq)
 		destroy_workqueue(slow_path_wq);
 	return ret;
@@ -204,7 +196,6 @@ cleanup_ccw_bus_type (void)
 {
 	css_driver_unregister(&io_subchannel_driver);
 	bus_unregister(&ccw_bus_type);
-	destroy_workqueue(ccw_device_notify_work);
 	destroy_workqueue(ccw_device_work);
 }
 
@@ -1496,11 +1487,22 @@ static void device_set_disconnected(struct ccw_device *cdev)
 		ccw_device_schedule_recovery();
 }
 
+void ccw_device_set_notoper(struct ccw_device *cdev)
+{
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
+	CIO_TRACE_EVENT(2, "notoper");
+	CIO_TRACE_EVENT(2, sch->dev.bus_id);
+	ccw_device_set_timeout(cdev, 0);
+	cio_disable_subchannel(sch);
+	cdev->private->state = DEV_STATE_NOT_OPER;
+}
+
 static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 {
 	int event, ret, disc;
 	unsigned long flags;
-	enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE } action;
+	enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE, DISC } action;
 	struct ccw_device *cdev;
 
 	spin_lock_irqsave(sch->lock, flags);
@@ -1535,16 +1537,11 @@ static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 		}
 		/* fall through */
 	case CIO_GONE:
-		/* Prevent unwanted effects when opening lock. */
-		cio_disable_subchannel(sch);
-		device_set_disconnected(cdev);
 		/* Ask driver what to do with device. */
-		action = UNREGISTER;
-		spin_unlock_irqrestore(sch->lock, flags);
-		ret = io_subchannel_notify(sch, event);
-		spin_lock_irqsave(sch->lock, flags);
-		if (ret)
-			action = NONE;
+		if (io_subchannel_notify(sch, event))
+			action = DISC;
+		else
+			action = UNREGISTER;
 		break;
 	case CIO_REVALIDATE:
 		/* Device will be removed, so no notify necessary. */
@@ -1565,6 +1562,7 @@ static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 	switch (action) {
 	case UNREGISTER:
 	case UNREGISTER_PROBE:
+		ccw_device_set_notoper(cdev);
 		/* Unregister device (will use subchannel lock). */
 		spin_unlock_irqrestore(sch->lock, flags);
 		css_sch_device_unregister(sch);
@@ -1577,6 +1575,9 @@ static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 	case REPROBE:
 		ccw_device_trigger_reprobe(cdev);
 		break;
+	case DISC:
+		device_set_disconnected(cdev);
+		break;
 	default:
 		break;
 	}
@@ -1828,5 +1829,4 @@ EXPORT_SYMBOL(ccw_driver_unregister);
 EXPORT_SYMBOL(get_ccwdev_by_busid);
 EXPORT_SYMBOL(ccw_bus_type);
 EXPORT_SYMBOL(ccw_device_work);
-EXPORT_SYMBOL(ccw_device_notify_work);
 EXPORT_SYMBOL_GPL(ccw_device_get_subchannel_id);
diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h
index 9800a8335a3..6f5c3f2b358 100644
--- a/drivers/s390/cio/device.h
+++ b/drivers/s390/cio/device.h
@@ -72,7 +72,6 @@ dev_fsm_final_state(struct ccw_device *cdev)
 }
 
 extern struct workqueue_struct *ccw_device_work;
-extern struct workqueue_struct *ccw_device_notify_work;
 extern wait_queue_head_t ccw_device_init_wq;
 extern atomic_t ccw_device_init_count;
 
@@ -120,6 +119,7 @@ int ccw_device_stlck(struct ccw_device *);
 void ccw_device_trigger_reprobe(struct ccw_device *);
 void ccw_device_kill_io(struct ccw_device *);
 int ccw_device_notify(struct ccw_device *, int);
+void ccw_device_set_notoper(struct ccw_device *cdev);
 
 /* qdio needs this. */
 void ccw_device_set_timeout(struct ccw_device *, int);
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 8b5fe57fb2f..84cc9ea346d 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -337,26 +337,34 @@ int ccw_device_notify(struct ccw_device *cdev, int event)
 		return 0;
 	if (!cdev->online)
 		return 0;
+	CIO_MSG_EVENT(2, "notify called for 0.%x.%04x, event=%d\n",
+		      cdev->private->dev_id.ssid, cdev->private->dev_id.devno,
+		      event);
 	return cdev->drv->notify ? cdev->drv->notify(cdev, event) : 0;
 }
 
-static void
-ccw_device_oper_notify(struct work_struct *work)
+static void cmf_reenable_delayed(struct work_struct *work)
 {
 	struct ccw_device_private *priv;
 	struct ccw_device *cdev;
-	int ret;
 
 	priv = container_of(work, struct ccw_device_private, kick_work);
 	cdev = priv->cdev;
-	ret = ccw_device_notify(cdev, CIO_OPER);
-	if (ret) {
+	cmf_reenable(cdev);
+}
+
+static void ccw_device_oper_notify(struct ccw_device *cdev)
+{
+	if (ccw_device_notify(cdev, CIO_OPER)) {
 		/* Reenable channel measurements, if needed. */
-		cmf_reenable(cdev);
-		wake_up(&cdev->private->wait_q);
-	} else
-		/* Driver doesn't want device back. */
-		ccw_device_do_unreg_rereg(work);
+		PREPARE_WORK(&cdev->private->kick_work, cmf_reenable_delayed);
+		queue_work(ccw_device_work, &cdev->private->kick_work);
+		return;
+	}
+	/* Driver doesn't want device back. */
+	ccw_device_set_notoper(cdev);
+	PREPARE_WORK(&cdev->private->kick_work, ccw_device_do_unreg_rereg);
+	queue_work(ccw_device_work, &cdev->private->kick_work);
 }
 
 /*
@@ -386,8 +394,7 @@ ccw_device_done(struct ccw_device *cdev, int state)
 
 	if (cdev->private->flags.donotify) {
 		cdev->private->flags.donotify = 0;
-		PREPARE_WORK(&cdev->private->kick_work, ccw_device_oper_notify);
-		queue_work(ccw_device_notify_work, &cdev->private->kick_work);
+		ccw_device_oper_notify(cdev);
 	}
 	wake_up(&cdev->private->wait_q);
 
@@ -651,6 +658,13 @@ ccw_device_offline(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
 
+	/* Allow ccw_device_offline while disconnected. */
+	if (cdev->private->state == DEV_STATE_DISCONNECTED ||
+	    cdev->private->state == DEV_STATE_NOT_OPER) {
+		cdev->private->flags.donotify = 0;
+		ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+		return 0;
+	}
 	if (ccw_device_is_orphan(cdev)) {
 		ccw_device_done(cdev, DEV_STATE_OFFLINE);
 		return 0;
diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c
index ef7bc0a125e..cf8f24a4b5e 100644
--- a/drivers/s390/cio/idset.c
+++ b/drivers/s390/cio/idset.c
@@ -5,7 +5,7 @@
  *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
  */
 
-#include <linux/slab.h>
+#include <linux/vmalloc.h>
 #include <linux/bitops.h>
 #include "idset.h"
 #include "css.h"
@@ -25,18 +25,18 @@ static struct idset *idset_new(int num_ssid, int num_id)
 {
 	struct idset *set;
 
-	set = kzalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id),
-		      GFP_KERNEL);
+	set = vmalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id));
 	if (set) {
 		set->num_ssid = num_ssid;
 		set->num_id = num_id;
+		memset(set->bitmap, 0, bitmap_size(num_ssid, num_id));
 	}
 	return set;
 }
 
 void idset_free(struct idset *set)
 {
-	kfree(set);
+	vfree(set);
 }
 
 void idset_clear(struct idset *set)
diff --git a/drivers/s390/cio/qdio_debug.h b/drivers/s390/cio/qdio_debug.h
index 8484b83698e..5a4d85b829a 100644
--- a/drivers/s390/cio/qdio_debug.h
+++ b/drivers/s390/cio/qdio_debug.h
@@ -61,18 +61,18 @@
 
 /* s390dbf views */
 #define QDIO_DBF_SETUP_LEN		8
-#define QDIO_DBF_SETUP_PAGES		4
+#define QDIO_DBF_SETUP_PAGES		8
 #define QDIO_DBF_SETUP_NR_AREAS		1
 
 #define QDIO_DBF_TRACE_LEN		8
 #define QDIO_DBF_TRACE_NR_AREAS		2
 
 #ifdef CONFIG_QDIO_DEBUG
-#define QDIO_DBF_TRACE_PAGES		16
+#define QDIO_DBF_TRACE_PAGES		32
 #define QDIO_DBF_SETUP_LEVEL		6
 #define QDIO_DBF_TRACE_LEVEL		4
 #else /* !CONFIG_QDIO_DEBUG */
-#define QDIO_DBF_TRACE_PAGES		4
+#define QDIO_DBF_TRACE_PAGES		8
 #define QDIO_DBF_SETUP_LEVEL		2
 #define QDIO_DBF_TRACE_LEVEL		2
 #endif /* CONFIG_QDIO_DEBUG */
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index d10c73cc168..e6eabc85342 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -330,6 +330,7 @@ static int qdio_siga_output(struct qdio_q *q)
 	int cc;
 	u32 busy_bit;
 	u64 start_time = 0;
+	char dbf_text[15];
 
 	QDIO_DBF_TEXT5(0, trace, "sigaout");
 	QDIO_DBF_HEX5(0, trace, &q, sizeof(void *));
@@ -338,6 +339,9 @@ static int qdio_siga_output(struct qdio_q *q)
 again:
 	cc = qdio_do_siga_output(q, &busy_bit);
 	if (queue_type(q) == QDIO_IQDIO_QFMT && cc == 2 && busy_bit) {
+		sprintf(dbf_text, "bb%4x%2x", q->irq_ptr->schid.sch_no, q->nr);
+		QDIO_DBF_TEXT3(0, trace, dbf_text);
+
 		if (!start_time)
 			start_time = get_usecs();
 		else if ((get_usecs() - start_time) < QDIO_BUSY_BIT_PATIENCE)
@@ -748,16 +752,18 @@ static void qdio_kick_outbound_q(struct qdio_q *q)
 	rc = qdio_siga_output(q);
 	switch (rc) {
 	case 0:
-		/* went smooth this time, reset timestamp */
-		q->u.out.timestamp = 0;
-
 		/* TODO: improve error handling for CC=0 case */
 #ifdef CONFIG_QDIO_DEBUG
-		QDIO_DBF_TEXT3(0, trace, "cc2reslv");
-		sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, q->nr,
-			atomic_read(&q->u.out.busy_siga_counter));
-		QDIO_DBF_TEXT3(0, trace, dbf_text);
+		if (q->u.out.timestamp) {
+			QDIO_DBF_TEXT3(0, trace, "cc2reslv");
+			sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no,
+				q->nr,
+				atomic_read(&q->u.out.busy_siga_counter));
+			QDIO_DBF_TEXT3(0, trace, dbf_text);
+		}
 #endif /* CONFIG_QDIO_DEBUG */
+		/* went smooth this time, reset timestamp */
+		q->u.out.timestamp = 0;
 		break;
 	/* cc=2 and busy bit */
 	case (2 | QDIO_ERROR_SIGA_BUSY):
@@ -1066,14 +1072,12 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 	if (IS_ERR(irb)) {
 		switch (PTR_ERR(irb)) {
 		case -EIO:
-			sprintf(dbf_text, "ierr%4x",
-				cdev->private->schid.sch_no);
+			sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no);
 			QDIO_DBF_TEXT2(1, setup, dbf_text);
 			qdio_int_error(cdev);
 			return;
 		case -ETIMEDOUT:
-			sprintf(dbf_text, "qtoh%4x",
-				cdev->private->schid.sch_no);
+			sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no);
 			QDIO_DBF_TEXT2(1, setup, dbf_text);
 			qdio_int_error(cdev);
 			return;
@@ -1124,8 +1128,10 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev)
 {
 	struct qdio_irq *irq_ptr;
+	char dbf_text[15];
 
-	QDIO_DBF_TEXT0(0, setup, "getssqd");
+	sprintf(dbf_text, "qssq%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
 
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
@@ -1149,14 +1155,13 @@ int qdio_cleanup(struct ccw_device *cdev, int how)
 	char dbf_text[15];
 	int rc;
 
+	sprintf(dbf_text, "qcln%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
 
-	sprintf(dbf_text, "qcln%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT1(0, trace, dbf_text);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-
 	rc = qdio_shutdown(cdev, how);
 	if (rc == 0)
 		rc = qdio_free(cdev);
@@ -1191,6 +1196,9 @@ int qdio_shutdown(struct ccw_device *cdev, int how)
 	unsigned long flags;
 	char dbf_text[15];
 
+	sprintf(dbf_text, "qshu%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
@@ -1205,10 +1213,6 @@ int qdio_shutdown(struct ccw_device *cdev, int how)
 		return 0;
 	}
 
-	sprintf(dbf_text, "qsqs%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT1(0, trace, dbf_text);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-
 	tiqdio_remove_input_queues(irq_ptr);
 	qdio_shutdown_queues(cdev);
 	qdio_shutdown_debug_entries(irq_ptr, cdev);
@@ -1247,7 +1251,6 @@ no_cleanup:
 
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
 	mutex_unlock(&irq_ptr->setup_mutex);
-	module_put(THIS_MODULE);
 	if (rc)
 		return rc;
 	return 0;
@@ -1263,16 +1266,14 @@ int qdio_free(struct ccw_device *cdev)
 	struct qdio_irq *irq_ptr;
 	char dbf_text[15];
 
+	sprintf(dbf_text, "qfre%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
 
 	mutex_lock(&irq_ptr->setup_mutex);
-
-	sprintf(dbf_text, "qfqs%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT1(0, trace, dbf_text);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-
 	cdev->private->qdio_data = NULL;
 	mutex_unlock(&irq_ptr->setup_mutex);
 
@@ -1295,7 +1296,6 @@ int qdio_initialize(struct qdio_initialize *init_data)
 
 	sprintf(dbf_text, "qini%4x", init_data->cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT0(0, setup, dbf_text);
-	QDIO_DBF_TEXT0(0, trace, dbf_text);
 
 	rc = qdio_allocate(init_data);
 	if (rc)
@@ -1319,7 +1319,6 @@ int qdio_allocate(struct qdio_initialize *init_data)
 
 	sprintf(dbf_text, "qalc%4x", init_data->cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT0(0, setup, dbf_text);
-	QDIO_DBF_TEXT0(0, trace, dbf_text);
 
 	if ((init_data->no_input_qs && !init_data->input_handler) ||
 	    (init_data->no_output_qs && !init_data->output_handler))
@@ -1355,7 +1354,7 @@ int qdio_allocate(struct qdio_initialize *init_data)
 		goto out_rel;
 
 	/* qdr is used in ccw1.cda which is u32 */
-	irq_ptr->qdr = kzalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA);
+	irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 	if (!irq_ptr->qdr)
 		goto out_rel;
 	WARN_ON((unsigned long)irq_ptr->qdr & 0xfff);
@@ -1389,6 +1388,9 @@ int qdio_establish(struct qdio_initialize *init_data)
 	unsigned long saveflags;
 	int rc;
 
+	sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
@@ -1396,13 +1398,6 @@ int qdio_establish(struct qdio_initialize *init_data)
 	if (cdev->private->state != DEV_STATE_ONLINE)
 		return -EINVAL;
 
-	if (!try_module_get(THIS_MODULE))
-		return -EINVAL;
-
-	sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-	QDIO_DBF_TEXT0(0, trace, dbf_text);
-
 	mutex_lock(&irq_ptr->setup_mutex);
 	qdio_setup_irq(init_data);
 
@@ -1472,6 +1467,9 @@ int qdio_activate(struct ccw_device *cdev)
 	unsigned long saveflags;
 	char dbf_text[20];
 
+	sprintf(dbf_text, "qact%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
@@ -1485,10 +1483,6 @@ int qdio_activate(struct ccw_device *cdev)
 		goto out;
 	}
 
-	sprintf(dbf_text, "qact%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT2(0, setup, dbf_text);
-	QDIO_DBF_TEXT2(0, trace, dbf_text);
-
 	irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd;
 	irq_ptr->ccw.flags = CCW_FLAG_SLI;
 	irq_ptr->ccw.count = irq_ptr->aqueue.count;
@@ -1663,7 +1657,7 @@ int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
 #ifdef CONFIG_QDIO_DEBUG
 	char dbf_text[20];
 
-	sprintf(dbf_text, "doQD%04x", cdev->private->schid.sch_no);
+	sprintf(dbf_text, "doQD%4x", cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT3(0, trace, dbf_text);
 #endif /* CONFIG_QDIO_DEBUG */
 
diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c
index ea01b85b1cc..ec5c4a41423 100644
--- a/drivers/s390/cio/qdio_perf.c
+++ b/drivers/s390/cio/qdio_perf.c
@@ -142,7 +142,7 @@ int __init qdio_setup_perf_stats(void)
 	return 0;
 }
 
-void __exit qdio_remove_perf_stats(void)
+void qdio_remove_perf_stats(void)
 {
 #ifdef CONFIG_PROC_FS
 	remove_proc_entry("qdio_perf", NULL);
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index f0923a8aced..1679e2f91c9 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -165,7 +165,7 @@ static void setup_queues(struct qdio_irq *irq_ptr,
 	void **output_sbal_array = qdio_init->output_sbal_addr_array;
 	int i;
 
-	sprintf(dbf_text, "qfqs%4x", qdio_init->cdev->private->schid.sch_no);
+	sprintf(dbf_text, "qset%4x", qdio_init->cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT0(0, setup, dbf_text);
 
 	for_each_input_queue(irq_ptr, q, i) {
@@ -285,7 +285,7 @@ void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr)
 	rc = __get_ssqd_info(irq_ptr);
 	if (rc) {
 		QDIO_DBF_TEXT2(0, setup, "ssqdasig");
-		sprintf(dbf_text, "schno%x", irq_ptr->schid.sch_no);
+		sprintf(dbf_text, "schn%4x", irq_ptr->schid.sch_no);
 		QDIO_DBF_TEXT2(0, setup, dbf_text);
 		sprintf(dbf_text, "rc:%d", rc);
 		QDIO_DBF_TEXT2(0, setup, dbf_text);
@@ -325,7 +325,7 @@ void qdio_release_memory(struct qdio_irq *irq_ptr)
 			kmem_cache_free(qdio_q_cache, q);
 		}
 	}
-	kfree(irq_ptr->qdr);
+	free_page((unsigned long) irq_ptr->qdr);
 	free_page(irq_ptr->chsc_page);
 	free_page((unsigned long) irq_ptr);
 }
@@ -447,7 +447,7 @@ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
 {
 	char s[80];
 
-	sprintf(s, "%s ", cdev->dev.bus_id);
+	sprintf(s, "%s sc:%x ", cdev->dev.bus_id, irq_ptr->schid.sch_no);
 
 	switch (irq_ptr->qib.qfmt) {
 	case QDIO_QETH_QFMT:
@@ -515,7 +515,7 @@ int __init qdio_setup_init(void)
 	return 0;
 }
 
-void __exit qdio_setup_exit(void)
+void qdio_setup_exit(void)
 {
 	kmem_cache_destroy(qdio_q_cache);
 }
diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c
index 9291a771d81..ea7f6140026 100644
--- a/drivers/s390/cio/qdio_thinint.c
+++ b/drivers/s390/cio/qdio_thinint.c
@@ -113,7 +113,11 @@ void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr)
 	struct qdio_q *q;
 	int i;
 
-	for_each_input_queue(irq_ptr, q, i) {
+	for (i = 0; i < irq_ptr->nr_input_qs; i++) {
+		q = irq_ptr->input_qs[i];
+		/* if establish triggered an error */
+		if (!q || !q->entry.prev || !q->entry.next)
+			continue;
 		list_del_rcu(&q->entry);
 		synchronize_rcu();
 	}
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 79954bd6bfa..292b60da6dc 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -352,7 +352,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 	return len;
 }
 
-void s390_virtio_console_init(void)
+void __init s390_virtio_console_init(void)
 {
 	virtio_cons_early_init(early_put_chars);
 }
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index a08b1682c8e..e10ac9ab2d4 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -133,14 +133,14 @@ claw_register_debug_facility(void)
 static inline void
 claw_set_busy(struct net_device *dev)
 {
- ((struct claw_privbk *) dev->priv)->tbusy=1;
+ ((struct claw_privbk *)dev->ml_priv)->tbusy = 1;
  eieio();
 }
 
 static inline void
 claw_clear_busy(struct net_device *dev)
 {
-	clear_bit(0, &(((struct claw_privbk *) dev->priv)->tbusy));
+	clear_bit(0, &(((struct claw_privbk *) dev->ml_priv)->tbusy));
 	netif_wake_queue(dev);
 	eieio();
 }
@@ -149,20 +149,20 @@ static inline int
 claw_check_busy(struct net_device *dev)
 {
 	eieio();
-	return ((struct claw_privbk *) dev->priv)->tbusy;
+	return ((struct claw_privbk *) dev->ml_priv)->tbusy;
 }
 
 static inline void
 claw_setbit_busy(int nr,struct net_device *dev)
 {
 	netif_stop_queue(dev);
- 	set_bit(nr, (void *)&(((struct claw_privbk *)dev->priv)->tbusy));
+	set_bit(nr, (void *)&(((struct claw_privbk *)dev->ml_priv)->tbusy));
 }
 
 static inline void
 claw_clearbit_busy(int nr,struct net_device *dev)
 {
- 	clear_bit(nr,(void *)&(((struct claw_privbk *)dev->priv)->tbusy));
+	clear_bit(nr, (void *)&(((struct claw_privbk *)dev->ml_priv)->tbusy));
 	netif_wake_queue(dev);
 }
 
@@ -171,7 +171,7 @@ claw_test_and_setbit_busy(int nr,struct net_device *dev)
 {
 	netif_stop_queue(dev);
 	return test_and_set_bit(nr,
- 		(void *)&(((struct claw_privbk *) dev->priv)->tbusy));
+		(void *)&(((struct claw_privbk *) dev->ml_priv)->tbusy));
 }
 
 
@@ -271,6 +271,7 @@ claw_probe(struct ccwgroup_device *cgdev)
 	if (!get_device(&cgdev->dev))
 		return -ENODEV;
 	privptr = kzalloc(sizeof(struct claw_privbk), GFP_KERNEL);
+	cgdev->dev.driver_data = privptr;
 	if (privptr == NULL) {
 		probe_error(cgdev);
 		put_device(&cgdev->dev);
@@ -305,7 +306,6 @@ claw_probe(struct ccwgroup_device *cgdev)
 	privptr->p_env->p_priv = privptr;
         cgdev->cdev[0]->handler = claw_irq_handler;
 	cgdev->cdev[1]->handler = claw_irq_handler;
-	cgdev->dev.driver_data = privptr;
 	CLAW_DBF_TEXT(2, setup, "prbext 0");
 
         return 0;
@@ -319,7 +319,7 @@ static int
 claw_tx(struct sk_buff *skb, struct net_device *dev)
 {
         int             rc;
-        struct claw_privbk *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
 	unsigned long saveflags;
         struct chbk *p_ch;
 
@@ -404,7 +404,7 @@ claw_pack_skb(struct claw_privbk *privptr)
 static int
 claw_change_mtu(struct net_device *dev, int new_mtu)
 {
-	struct claw_privbk  *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
 	int buff_size;
 	CLAW_DBF_TEXT(4, trace, "setmtu");
 	buff_size = privptr->p_env->write_size;
@@ -434,7 +434,7 @@ claw_open(struct net_device *dev)
         struct ccwbk *p_buf;
 
 	CLAW_DBF_TEXT(4, trace, "open");
-	privptr = (struct claw_privbk *)dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         /*   allocate and initialize CCW blocks */
 	if (privptr->buffs_alloc == 0) {
 	        rc=init_ccw_bk(dev);
@@ -780,7 +780,7 @@ claw_irq_tasklet ( unsigned long data )
 	p_ch = (struct chbk *) data;
         dev = (struct net_device *)p_ch->ndev;
 	CLAW_DBF_TEXT(4, trace, "IRQtask");
-        privptr = (struct claw_privbk *) dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         unpack_read(dev);
         clear_bit(CLAW_BH_ACTIVE, (void *)&p_ch->flag_a);
 	CLAW_DBF_TEXT(4, trace, "TskletXt");
@@ -805,7 +805,7 @@ claw_release(struct net_device *dev)
 
 	if (!dev)
                 return 0;
-        privptr = (struct claw_privbk *) dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         if (!privptr)
                 return 0;
 	CLAW_DBF_TEXT(4, trace, "release");
@@ -960,7 +960,7 @@ claw_write_next ( struct chbk * p_ch )
         if (p_ch->claw_state == CLAW_STOP)
                 return;
         dev = (struct net_device *) p_ch->ndev;
-	privptr = (struct claw_privbk *) dev->priv;
+	privptr = (struct claw_privbk *) dev->ml_priv;
         claw_free_wrt_buf( dev );
 	if ((privptr->write_free_count > 0) &&
 	    !skb_queue_empty(&p_ch->collect_queue)) {
@@ -1042,7 +1042,7 @@ add_claw_reads(struct net_device *dev, struct ccwbk* p_first,
         struct ccw1  temp_ccw;
         struct endccw * p_end;
 	CLAW_DBF_TEXT(4, trace, "addreads");
-        privptr = dev->priv;
+	privptr = dev->ml_priv;
         p_end = privptr->p_end_ccw;
 
         /* first CCW and last CCW contains a new set of read channel programs
@@ -1212,7 +1212,7 @@ find_link(struct net_device *dev, char *host_name, char *ws_name )
 	int    rc=0;
 
 	CLAW_DBF_TEXT(2, setup, "findlink");
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
         p_env=privptr->p_env;
 	switch (p_env->packing)
 	{
@@ -1264,7 +1264,7 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
 	struct chbk			*ch;
 
 	CLAW_DBF_TEXT(4, trace, "hw_tx");
-        privptr = (struct claw_privbk *) (dev->priv);
+	privptr = (struct claw_privbk *)(dev->ml_priv);
         p_ch=(struct chbk *)&privptr->channel[WRITE];
 	p_env =privptr->p_env;
 	claw_free_wrt_buf(dev);	/* Clean up free chain if posible */
@@ -1483,8 +1483,8 @@ init_ccw_bk(struct net_device *dev)
 	struct ccwbk*p_last_CCWB;
 	struct ccwbk*p_first_CCWB;
         struct endccw *p_endccw=NULL;
-        addr_t  real_address;
-        struct claw_privbk *privptr=dev->priv;
+	addr_t  real_address;
+	struct claw_privbk *privptr = dev->ml_priv;
         struct clawh *pClawH=NULL;
         addr_t   real_TIC_address;
         int i,j;
@@ -1960,19 +1960,16 @@ init_ccw_bk(struct net_device *dev)
 static void
 probe_error( struct ccwgroup_device *cgdev)
 {
-  struct claw_privbk *privptr;
+	struct claw_privbk *privptr;
 
 	CLAW_DBF_TEXT(4, trace, "proberr");
-        privptr=(struct claw_privbk *)cgdev->dev.driver_data;
-	if (privptr!=NULL) {
+	privptr = (struct claw_privbk *) cgdev->dev.driver_data;
+	if (privptr != NULL) {
+		cgdev->dev.driver_data = NULL;
 		kfree(privptr->p_env);
-		privptr->p_env=NULL;
-                kfree(privptr->p_mtc_envelope);
-               	privptr->p_mtc_envelope=NULL;
-                kfree(privptr);
-                privptr=NULL;
-        }
-        return;
+		kfree(privptr->p_mtc_envelope);
+		kfree(privptr);
+	}
 }    /*    probe_error    */
 
 /*-------------------------------------------------------------------*
@@ -2000,7 +1997,7 @@ claw_process_control( struct net_device *dev, struct ccwbk * p_ccw)
 	CLAW_DBF_TEXT(2, setup, "clw_cntl");
         udelay(1000);  /* Wait a ms for the control packets to
 			*catch up to each other */
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
         p_env=privptr->p_env;
 	tdev = &privptr->channel[READ].cdev->dev;
 	memcpy( &temp_host_name, p_env->host_name, 8);
@@ -2278,7 +2275,7 @@ claw_send_control(struct net_device *dev, __u8 type, __u8 link,
         struct sk_buff 			*skb;
 
 	CLAW_DBF_TEXT(2, setup, "sndcntl");
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
         p_ctl=(struct clawctl *)&privptr->ctl_bk;
 
         p_ctl->command=type;
@@ -2348,7 +2345,7 @@ static int
 claw_snd_conn_req(struct net_device *dev, __u8 link)
 {
         int                rc;
-        struct claw_privbk *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
         struct clawctl 	   *p_ctl;
 
 	CLAW_DBF_TEXT(2, setup, "snd_conn");
@@ -2408,7 +2405,7 @@ claw_snd_sys_validate_rsp(struct net_device *dev,
         int    rc;
 
 	CLAW_DBF_TEXT(2, setup, "chkresp");
-        privptr = dev->priv;
+	privptr = dev->ml_priv;
         p_env=privptr->p_env;
         rc=claw_send_control(dev, SYSTEM_VALIDATE_RESPONSE,
 		p_ctl->linkid,
@@ -2446,7 +2443,7 @@ net_device_stats *claw_stats(struct net_device *dev)
         struct claw_privbk *privptr;
 
 	CLAW_DBF_TEXT(4, trace, "stats");
-        privptr = dev->priv;
+	privptr = dev->ml_priv;
         return &privptr->stats;
 }     /*   end of claw_stats   */
 
@@ -2482,7 +2479,7 @@ unpack_read(struct net_device *dev )
         p_last_ccw=NULL;
 	p_packh=NULL;
 	p_packd=NULL;
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
 
 	p_dev = &privptr->channel[READ].cdev->dev;
 	p_env = privptr->p_env;
@@ -2651,7 +2648,7 @@ claw_strt_read (struct net_device *dev, int lock )
         int        rc = 0;
         __u32      parm;
         unsigned long  saveflags = 0;
-        struct claw_privbk *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
         struct ccwbk*p_ccwbk;
         struct chbk *p_ch;
         struct clawh *p_clawh;
@@ -2708,7 +2705,7 @@ claw_strt_out_IO( struct net_device *dev )
 	if (!dev) {
 		return;
 	}
-        privptr=(struct claw_privbk *)dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         p_ch=&privptr->channel[WRITE];
 
 	CLAW_DBF_TEXT(4, trace, "strt_io");
@@ -2741,7 +2738,7 @@ static void
 claw_free_wrt_buf( struct net_device *dev )
 {
 
-        struct claw_privbk *privptr=(struct claw_privbk *)dev->priv;
+	struct claw_privbk *privptr = (struct claw_privbk *)dev->ml_priv;
         struct ccwbk*p_first_ccw;
 	struct ccwbk*p_last_ccw;
 	struct ccwbk*p_this_ccw;
@@ -2798,13 +2795,13 @@ claw_free_netdevice(struct net_device * dev, int free_dev)
 	if (!dev)
 		return;
 	CLAW_DBF_TEXT_(2, setup, "%s", dev->name);
-	privptr = dev->priv;
+	privptr = dev->ml_priv;
 	if (dev->flags & IFF_RUNNING)
 		claw_release(dev);
 	if (privptr) {
 		privptr->channel[READ].ndev = NULL;  /* say it's free */
 	}
-	dev->priv=NULL;
+	dev->ml_priv = NULL;
 #ifdef MODULE
 	if (free_dev) {
 		free_netdev(dev);
@@ -2921,7 +2918,7 @@ claw_new_device(struct ccwgroup_device *cgdev)
 		printk(KERN_WARNING "%s:alloc_netdev failed\n",__func__);
 		goto out;
 	}
-	dev->priv = privptr;
+	dev->ml_priv = privptr;
 	cgdev->dev.driver_data = privptr;
         cgdev->cdev[READ]->dev.driver_data = privptr;
         cgdev->cdev[WRITE]->dev.driver_data = privptr;
@@ -3002,7 +2999,7 @@ claw_shutdown_device(struct ccwgroup_device *cgdev)
 			ret = claw_release(ndev);
 		ndev->flags &=~IFF_RUNNING;
 		unregister_netdev(ndev);
-		ndev->priv = NULL;  /* cgdev data, not ndev's to free */
+		ndev->ml_priv = NULL;  /* cgdev data, not ndev's to free */
 		claw_free_netdevice(ndev, 1);
 		priv->channel[READ].ndev = NULL;
 		priv->channel[WRITE].ndev = NULL;
diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c
index 0b4e6253abe..42776550acf 100644
--- a/drivers/s390/net/ctcm_fsms.c
+++ b/drivers/s390/net/ctcm_fsms.c
@@ -245,7 +245,7 @@ static void chx_txdone(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct sk_buff *skb;
 	int first = 1;
 	int i;
@@ -336,7 +336,7 @@ void ctcm_chx_txidle(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_PR_DEBUG("%s(%s): %s\n", __func__, ch->id, dev->name);
 
@@ -357,7 +357,7 @@ static void chx_rx(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int len = ch->max_bufsize - ch->irb->scsw.cmd.count;
 	struct sk_buff *skb = ch->trans_skb;
 	__u16 block_len = *((__u16 *)skb->data);
@@ -459,7 +459,7 @@ static void chx_firstio(fsm_instance *fi, int event, void *arg)
 			chx_rxidle(fi, event, arg);
 		} else {
 			struct net_device *dev = ch->netdev;
-			struct ctcm_priv *priv = dev->priv;
+			struct ctcm_priv *priv = dev->ml_priv;
 			fsm_newstate(fi, CTC_STATE_TXIDLE);
 			fsm_event(priv->fsm, DEV_EVENT_TXUP, dev);
 		}
@@ -496,7 +496,7 @@ static void chx_firstio(fsm_instance *fi, int event, void *arg)
 	if ((CHANNEL_DIRECTION(ch->flags) == READ) &&
 	    (ch->protocol == CTCM_PROTO_S390)) {
 		struct net_device *dev = ch->netdev;
-		struct ctcm_priv *priv = dev->priv;
+		struct ctcm_priv *priv = dev->ml_priv;
 		fsm_event(priv->fsm, DEV_EVENT_RXUP, dev);
 	}
 }
@@ -514,7 +514,7 @@ static void chx_rxidle(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	__u16 buflen;
 	int rc;
 
@@ -699,7 +699,7 @@ static void ctcm_chx_cleanup(fsm_instance *fi, int state,
 		struct channel *ch)
 {
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE,
 			"%s(%s): %s[%d]\n",
@@ -784,7 +784,7 @@ static void ctcm_chx_setuperr(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	/*
 	 * Special case: Got UC_RCRESET on setmode.
@@ -874,7 +874,7 @@ static void ctcm_chx_rxiniterr(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	if (event == CTC_EVENT_TIMER) {
 		if (!IS_MPCDEV(dev))
@@ -902,7 +902,7 @@ static void ctcm_chx_rxinitfail(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
 			"%s(%s): RX %s busy, init. fail",
@@ -923,7 +923,7 @@ static void ctcm_chx_rxdisc(fsm_instance *fi, int event, void *arg)
 	struct channel *ch = arg;
 	struct channel *ch2;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
 			"%s: %s: remote disconnect - re-init ...",
@@ -954,7 +954,7 @@ static void ctcm_chx_txiniterr(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	if (event == CTC_EVENT_TIMER) {
 		fsm_deltimer(&ch->timer);
@@ -984,7 +984,7 @@ static void ctcm_chx_txretry(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct sk_buff *skb;
 
 	CTCM_PR_DEBUG("Enter: %s: cp=%i ch=0x%p id=%s\n",
@@ -1057,7 +1057,7 @@ static void ctcm_chx_iofatal(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int rd = CHANNEL_DIRECTION(ch->flags);
 
 	fsm_deltimer(&ch->timer);
@@ -1207,7 +1207,7 @@ static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg)
 {
 	struct channel		*ch = arg;
 	struct net_device	*dev = ch->netdev;
-	struct ctcm_priv	*priv = dev->priv;
+	struct ctcm_priv	*priv = dev->ml_priv;
 	struct mpc_group	*grp = priv->mpcg;
 	struct sk_buff		*skb;
 	int		first = 1;
@@ -1368,7 +1368,7 @@ static void ctcmpc_chx_rx(fsm_instance *fi, int event, void *arg)
 {
 	struct channel		*ch = arg;
 	struct net_device	*dev = ch->netdev;
-	struct ctcm_priv	*priv = dev->priv;
+	struct ctcm_priv	*priv = dev->ml_priv;
 	struct mpc_group	*grp = priv->mpcg;
 	struct sk_buff		*skb = ch->trans_skb;
 	struct sk_buff		*new_skb;
@@ -1471,7 +1471,7 @@ static void ctcmpc_chx_firstio(fsm_instance *fi, int event, void *arg)
 {
 	struct channel		*ch = arg;
 	struct net_device	*dev = ch->netdev;
-	struct ctcm_priv	*priv = dev->priv;
+	struct ctcm_priv	*priv = dev->ml_priv;
 	struct mpc_group	*gptr = priv->mpcg;
 
 	CTCM_PR_DEBUG("Enter %s: id=%s, ch=0x%p\n",
@@ -1525,7 +1525,7 @@ void ctcmpc_chx_rxidle(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv  *priv = dev->priv;
+	struct ctcm_priv  *priv = dev->ml_priv;
 	struct mpc_group  *grp = priv->mpcg;
 	int rc;
 	unsigned long saveflags = 0;	/* avoids compiler warning */
@@ -1580,7 +1580,7 @@ static void ctcmpc_chx_attn(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	  *ch     = arg;
 	struct net_device *dev    = ch->netdev;
-	struct ctcm_priv  *priv   = dev->priv;
+	struct ctcm_priv  *priv   = dev->ml_priv;
 	struct mpc_group  *grp = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s(%s): %s(ch=0x%p), cp=%i, ChStat:%s, GrpStat:%s\n",
@@ -1639,7 +1639,7 @@ static void ctcmpc_chx_attnbusy(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	  *ch     = arg;
 	struct net_device *dev    = ch->netdev;
-	struct ctcm_priv  *priv   = dev->priv;
+	struct ctcm_priv  *priv   = dev->ml_priv;
 	struct mpc_group  *grp    = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s(%s): %s\n  ChState:%s GrpState:%s\n",
@@ -1724,7 +1724,7 @@ static void ctcmpc_chx_resend(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	   *ch	   = arg;
 	struct net_device  *dev    = ch->netdev;
-	struct ctcm_priv   *priv   = dev->priv;
+	struct ctcm_priv   *priv   = dev->ml_priv;
 	struct mpc_group   *grp    = priv->mpcg;
 
 	fsm_event(grp->fsm, MPCG_EVENT_XID0DO, ch);
@@ -1740,7 +1740,7 @@ static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel *ach = arg;
 	struct net_device *dev = ach->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct channel *wch = priv->channel[WRITE];
 	struct channel *rch = priv->channel[READ];
@@ -2050,7 +2050,7 @@ int mpc_ch_fsm_len = ARRAY_SIZE(ctcmpc_ch_fsm);
 static void dev_action_start(fsm_instance *fi, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int direction;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
@@ -2076,7 +2076,7 @@ static void dev_action_stop(fsm_instance *fi, int event, void *arg)
 {
 	int direction;
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 
@@ -2096,7 +2096,7 @@ static void dev_action_restart(fsm_instance *fi, int event, void *arg)
 {
 	int restart_timer;
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(TRACE, dev, "");
 
@@ -2133,12 +2133,12 @@ static void dev_action_restart(fsm_instance *fi, int event, void *arg)
 static void dev_action_chup(fsm_instance *fi, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int dev_stat = fsm_getstate(fi);
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE,
 			"%s(%s): priv = %p [%d,%d]\n ",	CTCM_FUNTAIL,
-				dev->name, dev->priv, dev_stat, event);
+				dev->name, dev->ml_priv, dev_stat, event);
 
 	switch (fsm_getstate(fi)) {
 	case DEV_STATE_STARTWAIT_RXTX:
@@ -2195,7 +2195,7 @@ static void dev_action_chdown(fsm_instance *fi, int event, void *arg)
 {
 
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 126a3ebb8ab..b11fec24c7d 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -69,7 +69,7 @@ struct channel *channels;
 void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 {
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	__u16 len = *((__u16 *) pskb->data);
 
 	skb_put(pskb, 2 + LL_HEADER_LENGTH);
@@ -414,7 +414,7 @@ int ctcm_ch_alloc_buffer(struct channel *ch)
  */
 int ctcm_open(struct net_device *dev)
 {
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 	if (!IS_MPC(priv))
@@ -432,7 +432,7 @@ int ctcm_open(struct net_device *dev)
  */
 int ctcm_close(struct net_device *dev)
 {
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 	if (!IS_MPC(priv))
@@ -573,7 +573,7 @@ static int ctcm_transmit_skb(struct channel *ch, struct sk_buff *skb)
 		skb_pull(skb, LL_HEADER_LENGTH + 2);
 	} else if (ccw_idx == 0) {
 		struct net_device *dev = ch->netdev;
-		struct ctcm_priv *priv = dev->priv;
+		struct ctcm_priv *priv = dev->ml_priv;
 		priv->stats.tx_packets++;
 		priv->stats.tx_bytes += skb->len - LL_HEADER_LENGTH;
 	}
@@ -592,7 +592,7 @@ static void ctcmpc_send_sweep_req(struct channel *rch)
 	struct channel *ch;
 	/* int rc = 0; */
 
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 	ch = priv->channel[WRITE];
 
@@ -652,7 +652,7 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 {
 	struct pdu *p_header;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct th_header *header;
 	struct sk_buff *nskb;
@@ -867,7 +867,7 @@ done:
 /* first merge version - leaving both functions separated */
 static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	if (skb == NULL) {
 		CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
@@ -911,7 +911,7 @@ static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	int len = 0;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp  = priv->mpcg;
 	struct sk_buff *newskb = NULL;
 
@@ -1025,7 +1025,7 @@ static int ctcm_change_mtu(struct net_device *dev, int new_mtu)
 	if (new_mtu < 576 || new_mtu > 65527)
 		return -EINVAL;
 
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	max_bufsize = priv->channel[READ]->max_bufsize;
 
 	if (IS_MPC(priv)) {
@@ -1050,7 +1050,7 @@ static int ctcm_change_mtu(struct net_device *dev, int new_mtu)
  */
 static struct net_device_stats *ctcm_stats(struct net_device *dev)
 {
-	return &((struct ctcm_priv *)dev->priv)->stats;
+	return &((struct ctcm_priv *)dev->ml_priv)->stats;
 }
 
 static void ctcm_free_netdevice(struct net_device *dev)
@@ -1060,7 +1060,7 @@ static void ctcm_free_netdevice(struct net_device *dev)
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
 			"%s(%s)", CTCM_FUNTAIL, dev->name);
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	if (priv) {
 		grp = priv->mpcg;
 		if (grp) {
@@ -1125,7 +1125,7 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv)
 			CTCM_FUNTAIL);
 		return NULL;
 	}
-	dev->priv = priv;
+	dev->ml_priv = priv;
 	priv->fsm = init_fsm("ctcmdev", dev_state_names, dev_event_names,
 				CTCM_NR_DEV_STATES, CTCM_NR_DEV_EVENTS,
 				dev_fsm, dev_fsm_len, GFP_KERNEL);
diff --git a/drivers/s390/net/ctcm_main.h b/drivers/s390/net/ctcm_main.h
index a72e0feeb27..8e10ee86a5e 100644
--- a/drivers/s390/net/ctcm_main.h
+++ b/drivers/s390/net/ctcm_main.h
@@ -229,14 +229,14 @@ void ctcm_remove_files(struct device *dev);
  */
 static inline void ctcm_clear_busy_do(struct net_device *dev)
 {
-	clear_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy));
+	clear_bit(0, &(((struct ctcm_priv *)dev->ml_priv)->tbusy));
 	netif_wake_queue(dev);
 }
 
 static inline void ctcm_clear_busy(struct net_device *dev)
 {
 	struct mpc_group *grp;
-	grp = ((struct ctcm_priv *)dev->priv)->mpcg;
+	grp = ((struct ctcm_priv *)dev->ml_priv)->mpcg;
 
 	if (!(grp && grp->in_sweep))
 		ctcm_clear_busy_do(dev);
@@ -246,7 +246,8 @@ static inline void ctcm_clear_busy(struct net_device *dev)
 static inline int ctcm_test_and_set_busy(struct net_device *dev)
 {
 	netif_stop_queue(dev);
-	return test_and_set_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy));
+	return test_and_set_bit(0,
+			&(((struct ctcm_priv *)dev->ml_priv)->tbusy));
 }
 
 extern int loglevel;
@@ -292,7 +293,7 @@ struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv);
 #define IS_MPC(p) ((p)->protocol == CTCM_PROTO_MPC)
 
 /* test if struct ctcm_priv of struct net_device has MPC protocol setting */
-#define IS_MPCDEV(d) IS_MPC((struct ctcm_priv *)d->priv)
+#define IS_MPCDEV(dev) IS_MPC((struct ctcm_priv *)dev->ml_priv)
 
 static inline gfp_t gfp_type(void)
 {
diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index 49ae1cd25ca..cbe470493bf 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -19,7 +19,6 @@
 #undef DEBUGDATA
 #undef DEBUGCCW
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -313,10 +312,10 @@ static struct net_device *ctcmpc_get_dev(int port_num)
 					CTCM_FUNTAIL, device);
 		return NULL;
 	}
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	if (priv == NULL) {
 		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
-			"%s(%s): dev->priv is NULL",
+			"%s(%s): dev->ml_priv is NULL",
 					CTCM_FUNTAIL, device);
 		return NULL;
 	}
@@ -345,7 +344,7 @@ int ctc_mpc_alloc_channel(int port_num, void (*callback)(int, int))
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return 1;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 
 	grp->allochanfunc = callback;
@@ -417,7 +416,7 @@ void ctc_mpc_establish_connectivity(int port_num,
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 	rch = priv->channel[READ];
 	wch = priv->channel[WRITE];
@@ -535,7 +534,7 @@ void ctc_mpc_dealloc_ch(int port_num)
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 
 	CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_DEBUG,
@@ -571,7 +570,7 @@ void ctc_mpc_flow_control(int port_num, int flowc)
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 
 	CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
@@ -620,7 +619,7 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo)
 {
 	struct channel	  *rch = mpcginfo->ch;
 	struct net_device *dev = rch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group  *grp = priv->mpcg;
 	struct channel	  *ch = priv->channel[WRITE];
 
@@ -651,7 +650,7 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo)
 static void ctcmpc_send_sweep_resp(struct channel *rch)
 {
 	struct net_device *dev = rch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	int rc = 0;
 	struct th_sweep *header;
@@ -713,7 +712,7 @@ static void mpc_rcvd_sweep_req(struct mpcg_info *mpcginfo)
 {
 	struct channel	  *rch     = mpcginfo->ch;
 	struct net_device *dev     = rch->netdev;
-	struct ctcm_priv  *priv = dev->priv;
+	struct ctcm_priv  *priv = dev->ml_priv;
 	struct mpc_group  *grp  = priv->mpcg;
 	struct channel	  *ch	   = priv->channel[WRITE];
 
@@ -847,7 +846,7 @@ static int mpcg_fsm_len = ARRAY_SIZE(mpcg_fsm);
 static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 
 	if (grp == NULL) {
@@ -891,7 +890,7 @@ static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
 void mpc_group_ready(unsigned long adev)
 {
 	struct net_device *dev = (struct net_device *)adev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct channel *ch = NULL;
 
@@ -947,7 +946,7 @@ void mpc_group_ready(unsigned long adev)
 void mpc_channel_action(struct channel *ch, int direction, int action)
 {
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 
 	if (grp == NULL) {
@@ -1057,7 +1056,7 @@ done:
 static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 {
 	struct net_device *dev	= ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct pdu *curr_pdu;
 	struct mpcg_info *mpcginfo;
@@ -1255,7 +1254,7 @@ void ctcmpc_bh(unsigned long thischan)
 	struct channel	  *ch	= (struct channel *)thischan;
 	struct sk_buff	  *skb;
 	struct net_device *dev	= ch->netdev;
-	struct ctcm_priv  *priv	= dev->priv;
+	struct ctcm_priv  *priv	= dev->ml_priv;
 	struct mpc_group  *grp	= priv->mpcg;
 
 	CTCM_PR_DEBUG("%s cp:%i enter:  %s() %s\n",
@@ -1377,7 +1376,7 @@ static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg)
 	BUG_ON(dev == NULL);
 	CTCM_PR_DEBUG("Enter %s: %s\n",	__func__, dev->name);
 
-	priv  = dev->priv;
+	priv  = dev->ml_priv;
 	grp =  priv->mpcg;
 	grp->flow_off_called = 0;
 	fsm_deltimer(&grp->timer);
@@ -1483,7 +1482,7 @@ static void mpc_action_timeout(fsm_instance *fi, int event, void *arg)
 
 	BUG_ON(dev == NULL);
 
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 	wch = priv->channel[WRITE];
 	rch = priv->channel[READ];
@@ -1521,7 +1520,7 @@ void mpc_action_discontact(fsm_instance *fi, int event, void *arg)
 	if (ch) {
 		dev = ch->netdev;
 		if (dev) {
-			priv = dev->priv;
+			priv = dev->ml_priv;
 			if (priv) {
 				CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_NOTICE,
 					"%s: %s: %s\n",
@@ -1569,7 +1568,7 @@ static int mpc_validate_xid(struct mpcg_info *mpcginfo)
 {
 	struct channel	   *ch	 = mpcginfo->ch;
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 	struct xid2	   *xid  = mpcginfo->xid;
 	int	rc	 = 0;
@@ -1866,7 +1865,7 @@ static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	   *ch   = arg;
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 
 	CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
@@ -1906,7 +1905,7 @@ static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg)
 static void mpc_action_doxid7(fsm_instance *fsm, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv  *priv = dev->priv;
+	struct ctcm_priv  *priv = dev->ml_priv;
 	struct mpc_group  *grp  = NULL;
 	int direction;
 	int send = 0;
@@ -1983,7 +1982,7 @@ static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg)
 	struct mpcg_info   *mpcginfo  = arg;
 	struct channel	   *ch   = mpcginfo->ch;
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s: ch-id:%s xid2:%i xid7:%i xidt_p2:%i \n",
@@ -2045,7 +2044,7 @@ static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg)
 	struct mpcg_info   *mpcginfo   = arg;
 	struct channel	   *ch	       = mpcginfo->ch;
 	struct net_device  *dev        = ch->netdev;
-	struct ctcm_priv   *priv    = dev->priv;
+	struct ctcm_priv   *priv    = dev->ml_priv;
 	struct mpc_group   *grp     = priv->mpcg;
 
 	CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
@@ -2097,7 +2096,7 @@ static int mpc_send_qllc_discontact(struct net_device *dev)
 	__u32	new_len	= 0;
 	struct sk_buff   *skb;
 	struct qllc      *qllcptr;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s: GROUP STATE: %s\n",
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 6de28385b35..9bcfa04d863 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1412,7 +1412,8 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	}
 	/* How far in the ccw chain have we processed? */
 	if ((channel->state != LCS_CH_STATE_INIT) &&
-	    (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC)) {
+	    (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC) &&
+	    (irb->scsw.cmd.cpa != 0)) {
 		index = (struct ccw1 *) __va((addr_t) irb->scsw.cmd.cpa)
 			- channel->ccws;
 		if ((irb->scsw.cmd.actl & SCSW_ACTL_SUSPENDED) ||
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 1895dbb553c..bf8a75c92f2 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -419,6 +419,7 @@ struct qeth_qdio_out_buffer {
 	int next_element_to_fill;
 	struct sk_buff_head skb_list;
 	struct list_head ctx_list;
+	int is_header[16];
 };
 
 struct qeth_card;
@@ -688,6 +689,7 @@ struct qeth_mc_mac {
 	struct list_head list;
 	__u8 mc_addr[MAX_ADDR_LEN];
 	unsigned char mc_addrlen;
+	int is_vmac;
 };
 
 struct qeth_card {
@@ -785,7 +787,7 @@ void qeth_core_remove_osn_attributes(struct device *);
 
 /* exports for qeth discipline device drivers */
 extern struct qeth_card_list_struct qeth_core_card_list;
-
+extern struct kmem_cache *qeth_core_header_cache;
 extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS];
 
 void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int);
@@ -843,7 +845,7 @@ int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int);
 int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int);
 int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *,
 			struct sk_buff *, struct qeth_hdr *, int,
-			struct qeth_eddp_context *);
+			struct qeth_eddp_context *, int, int);
 int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
 		    struct sk_buff *, struct qeth_hdr *,
 		    int, struct qeth_eddp_context *);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index cebb25e36e8..c7ab1b86451 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -19,8 +19,8 @@
 #include <linux/mii.h>
 #include <linux/kthread.h>
 
-#include <asm-s390/ebcdic.h>
-#include <asm-s390/io.h>
+#include <asm/ebcdic.h>
+#include <asm/io.h>
 #include <asm/s390_rdev.h>
 
 #include "qeth_core.h"
@@ -48,6 +48,8 @@ EXPORT_SYMBOL_GPL(qeth_dbf);
 
 struct qeth_card_list_struct qeth_core_card_list;
 EXPORT_SYMBOL_GPL(qeth_core_card_list);
+struct kmem_cache *qeth_core_header_cache;
+EXPORT_SYMBOL_GPL(qeth_core_header_cache);
 
 static struct device *qeth_core_root_dev;
 static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY;
@@ -933,6 +935,10 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
 	}
 	qeth_eddp_buf_release_contexts(buf);
 	for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) {
+		if (buf->buffer->element[i].addr && buf->is_header[i])
+			kmem_cache_free(qeth_core_header_cache,
+				buf->buffer->element[i].addr);
+		buf->is_header[i] = 0;
 		buf->buffer->element[i].length = 0;
 		buf->buffer->element[i].addr = NULL;
 		buf->buffer->element[i].flags = 0;
@@ -3002,8 +3008,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr,
 	if (skb_shinfo(skb)->nr_frags > 0)
 		elements_needed = (skb_shinfo(skb)->nr_frags + 1);
 	if (elements_needed == 0)
-		elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
-			+ skb->len) >> PAGE_SHIFT);
+		elements_needed = 1 + (((((unsigned long) skb->data) %
+				PAGE_SIZE) + skb->len) >> PAGE_SHIFT);
 	if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
 		QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
 			"(Number=%d / Length=%d). Discarded.\n",
@@ -3015,9 +3021,10 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr,
 EXPORT_SYMBOL_GPL(qeth_get_elements_no);
 
 static inline void __qeth_fill_buffer(struct sk_buff *skb,
-	struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill)
+	struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill,
+	int offset)
 {
-	int length = skb->len;
+	int length = skb->len - offset;
 	int length_here;
 	int element;
 	char *data;
@@ -3027,6 +3034,11 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
 	data = skb->data;
 	first_lap = (is_tso == 0 ? 1 : 0);
 
+	if (offset >= 0) {
+		data = skb->data + offset;
+		first_lap = 0;
+	}
+
 	while (length > 0) {
 		/* length_here is the remaining amount of data in this page */
 		length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE);
@@ -3058,22 +3070,22 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
 }
 
 static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
-		struct qeth_qdio_out_buffer *buf, struct sk_buff *skb)
+		struct qeth_qdio_out_buffer *buf, struct sk_buff *skb,
+		struct qeth_hdr *hdr, int offset, int hd_len)
 {
 	struct qdio_buffer *buffer;
-	struct qeth_hdr_tso *hdr;
 	int flush_cnt = 0, hdr_len, large_send = 0;
 
 	buffer = buf->buffer;
 	atomic_inc(&skb->users);
 	skb_queue_tail(&buf->skb_list, skb);
 
-	hdr  = (struct qeth_hdr_tso *) skb->data;
 	/*check first on TSO ....*/
-	if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) {
+	if (hdr->hdr.l3.id == QETH_HEADER_TYPE_TSO) {
 		int element = buf->next_element_to_fill;
 
-		hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len;
+		hdr_len = sizeof(struct qeth_hdr_tso) +
+			((struct qeth_hdr_tso *)hdr)->ext.dg_hdr_len;
 		/*fill first buffer entry only with header information */
 		buffer->element[element].addr = skb->data;
 		buffer->element[element].length = hdr_len;
@@ -3083,9 +3095,20 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
 		skb->len  -= hdr_len;
 		large_send = 1;
 	}
+
+	if (offset >= 0) {
+		int element = buf->next_element_to_fill;
+		buffer->element[element].addr = hdr;
+		buffer->element[element].length = sizeof(struct qeth_hdr) +
+							hd_len;
+		buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+		buf->is_header[element] = 1;
+		buf->next_element_to_fill++;
+	}
+
 	if (skb_shinfo(skb)->nr_frags == 0)
 		__qeth_fill_buffer(skb, buffer, large_send,
-				   (int *)&buf->next_element_to_fill);
+				(int *)&buf->next_element_to_fill, offset);
 	else
 		__qeth_fill_buffer_frag(skb, buffer, large_send,
 					(int *)&buf->next_element_to_fill);
@@ -3115,7 +3138,7 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
 int qeth_do_send_packet_fast(struct qeth_card *card,
 		struct qeth_qdio_out_q *queue, struct sk_buff *skb,
 		struct qeth_hdr *hdr, int elements_needed,
-		struct qeth_eddp_context *ctx)
+		struct qeth_eddp_context *ctx, int offset, int hd_len)
 {
 	struct qeth_qdio_out_buffer *buffer;
 	int buffers_needed = 0;
@@ -3148,7 +3171,7 @@ int qeth_do_send_packet_fast(struct qeth_card *card,
 	}
 	atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
 	if (ctx == NULL) {
-		qeth_fill_buffer(queue, buffer, skb);
+		qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len);
 		qeth_flush_buffers(queue, index, 1);
 	} else {
 		flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index);
@@ -3224,7 +3247,7 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue,
 		}
 	}
 	if (ctx == NULL)
-		tmp = qeth_fill_buffer(queue, buffer, skb);
+		tmp = qeth_fill_buffer(queue, buffer, skb, hdr, -1, 0);
 	else {
 		tmp = qeth_eddp_fill_buffer(queue, ctx,
 						queue->next_buf_to_fill);
@@ -4443,8 +4466,17 @@ static int __init qeth_core_init(void)
 	rc = IS_ERR(qeth_core_root_dev) ? PTR_ERR(qeth_core_root_dev) : 0;
 	if (rc)
 		goto register_err;
-	return 0;
 
+	qeth_core_header_cache = kmem_cache_create("qeth_hdr",
+			sizeof(struct qeth_hdr) + ETH_HLEN, 64, 0, NULL);
+	if (!qeth_core_header_cache) {
+		rc = -ENOMEM;
+		goto slab_err;
+	}
+
+	return 0;
+slab_err:
+	s390_root_dev_unregister(qeth_core_root_dev);
 register_err:
 	driver_remove_file(&qeth_core_ccwgroup_driver.driver,
 			   &driver_attr_group);
@@ -4466,6 +4498,7 @@ static void __exit qeth_core_exit(void)
 			   &driver_attr_group);
 	ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver);
 	ccw_driver_unregister(&qeth_ccw_driver);
+	kmem_cache_destroy(qeth_core_header_cache);
 	qeth_unregister_dbf_views();
 	PRINT_INFO("core functions removed\n");
 }
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index a8b069cd9a4..3ac3cc1e03c 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -177,9 +177,10 @@ static int qeth_l2_send_delgroupmac(struct qeth_card *card, __u8 *mac)
 					  qeth_l2_send_delgroupmac_cb);
 }
 
-static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac)
+static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac, int vmac)
 {
 	struct qeth_mc_mac *mc;
+	int rc;
 
 	mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC);
 
@@ -188,8 +189,16 @@ static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac)
 
 	memcpy(mc->mc_addr, mac, OSA_ADDR_LEN);
 	mc->mc_addrlen = OSA_ADDR_LEN;
+	mc->is_vmac = vmac;
+
+	if (vmac) {
+		rc = qeth_l2_send_setdelmac(card, mac, IPA_CMD_SETVMAC,
+					NULL);
+	} else {
+		rc = qeth_l2_send_setgroupmac(card, mac);
+	}
 
-	if (!qeth_l2_send_setgroupmac(card, mac))
+	if (!rc)
 		list_add_tail(&mc->list, &card->mc_list);
 	else
 		kfree(mc);
@@ -201,7 +210,11 @@ static void qeth_l2_del_all_mc(struct qeth_card *card)
 
 	spin_lock_bh(&card->mclock);
 	list_for_each_entry_safe(mc, tmp, &card->mc_list, list) {
-		qeth_l2_send_delgroupmac(card, mc->mc_addr);
+		if (mc->is_vmac)
+			qeth_l2_send_setdelmac(card, mc->mc_addr,
+					IPA_CMD_DELVMAC, NULL);
+		else
+			qeth_l2_send_delgroupmac(card, mc->mc_addr);
 		list_del(&mc->list);
 		kfree(mc);
 	}
@@ -243,8 +256,7 @@ static void qeth_l2_get_packet_type(struct qeth_card *card,
 static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
 			struct sk_buff *skb, int ipv, int cast_type)
 {
-	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)((skb->data) +
-					QETH_HEADER_SIZE);
+	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb);
 
 	memset(hdr, 0, sizeof(struct qeth_hdr));
 	hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2;
@@ -591,7 +603,7 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p)
 static void qeth_l2_set_multicast_list(struct net_device *dev)
 {
 	struct qeth_card *card = dev->ml_priv;
-	struct dev_mc_list *dm;
+	struct dev_addr_list *dm;
 
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return ;
@@ -600,7 +612,11 @@ static void qeth_l2_set_multicast_list(struct net_device *dev)
 	qeth_l2_del_all_mc(card);
 	spin_lock_bh(&card->mclock);
 	for (dm = dev->mc_list; dm; dm = dm->next)
-		qeth_l2_add_mc(card, dm->dmi_addr);
+		qeth_l2_add_mc(card, dm->da_addr, 0);
+
+	for (dm = dev->uc_list; dm; dm = dm->next)
+		qeth_l2_add_mc(card, dm->da_addr, 1);
+
 	spin_unlock_bh(&card->mclock);
 	if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
 		return;
@@ -621,6 +637,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int tx_bytes = skb->len;
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
+	int data_offset = -1;
+	int elements_needed = 0;
+	int hd_len = 0;
 
 	if ((card->state != CARD_STATE_UP) || !card->lan_online) {
 		card->stats.tx_carrier_errors++;
@@ -643,13 +662,32 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		hdr = (struct qeth_hdr *)skb->data;
 	else {
-		/* create a clone with writeable headroom */
-		new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr));
-		if (!new_skb)
-			goto tx_drop;
-		hdr = (struct qeth_hdr *)skb_push(new_skb,
+		if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+		    (skb_shinfo(skb)->nr_frags == 0)) {
+			new_skb = skb;
+			data_offset = ETH_HLEN;
+			hd_len = ETH_HLEN;
+			hdr = kmem_cache_alloc(qeth_core_header_cache,
+						GFP_ATOMIC);
+			if (!hdr)
+				goto tx_drop;
+			elements_needed++;
+			skb_reset_mac_header(new_skb);
+			qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+			hdr->hdr.l2.pkt_length = new_skb->len;
+			memcpy(((char *)hdr) + sizeof(struct qeth_hdr),
+				skb_mac_header(new_skb), ETH_HLEN);
+		} else {
+			/* create a clone with writeable headroom */
+			new_skb = skb_realloc_headroom(skb,
+						sizeof(struct qeth_hdr));
+			if (!new_skb)
+				goto tx_drop;
+			hdr = (struct qeth_hdr *)skb_push(new_skb,
 						sizeof(struct qeth_hdr));
-		qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+			skb_set_mac_header(new_skb, sizeof(struct qeth_hdr));
+			qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+		}
 	}
 
 	if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -660,9 +698,13 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			goto tx_drop;
 		}
 	} else {
-		elements = qeth_get_elements_no(card, (void *)hdr, new_skb, 0);
-		if (!elements)
+		elements = qeth_get_elements_no(card, (void *)hdr, new_skb,
+						elements_needed);
+		if (!elements) {
+			if (data_offset >= 0)
+				kmem_cache_free(qeth_core_header_cache, hdr);
 			goto tx_drop;
+		}
 	}
 
 	if ((large_send == QETH_LARGE_SEND_NO) &&
@@ -674,7 +716,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 					 elements, ctx);
 	else
 		rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
-					      elements, ctx);
+					elements, ctx, data_offset, hd_len);
 	if (!rc) {
 		card->stats.tx_packets++;
 		card->stats.tx_bytes += tx_bytes;
@@ -701,6 +743,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (ctx != NULL)
 			qeth_eddp_put_context(ctx);
 
+		if (data_offset >= 0)
+			kmem_cache_free(qeth_core_header_cache, hdr);
+
 		if (rc == -EBUSY) {
 			if (new_skb != skb)
 				dev_kfree_skb_any(new_skb);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 3e1d1385735..dd72c3c2016 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2604,6 +2604,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int tx_bytes = skb->len;
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
+	int data_offset = -1;
 
 	if ((card->info.type == QETH_CARD_TYPE_IQD) &&
 	    (skb->protocol != htons(ETH_P_IPV6)) &&
@@ -2624,14 +2625,28 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		card->perf_stats.outbound_start_time = qeth_get_micros();
 	}
 
-	/* create a clone with writeable headroom */
-	new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) +
-					VLAN_HLEN);
-	if (!new_skb)
-		goto tx_drop;
+	if (skb_is_gso(skb))
+		large_send = card->options.large_send;
+
+	if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+	    (skb_shinfo(skb)->nr_frags == 0)) {
+		new_skb = skb;
+		data_offset = ETH_HLEN;
+		hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC);
+		if (!hdr)
+			goto tx_drop;
+		elements_needed++;
+	} else {
+		/* create a clone with writeable headroom */
+		new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso)
+					+ VLAN_HLEN);
+		if (!new_skb)
+			goto tx_drop;
+	}
 
 	if (card->info.type == QETH_CARD_TYPE_IQD) {
-		skb_pull(new_skb, ETH_HLEN);
+		if (data_offset < 0)
+			skb_pull(new_skb, ETH_HLEN);
 	} else {
 		if (new_skb->protocol == htons(ETH_P_IP)) {
 			if (card->dev->type == ARPHRD_IEEE802_TR)
@@ -2657,9 +2672,6 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	if (skb_is_gso(new_skb))
-		large_send = card->options.large_send;
-
 	/* fix hardware limitation: as long as we do not have sbal
 	 * chaining we can not send long frag lists so we temporary
 	 * switch to EDDP
@@ -2677,9 +2689,16 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		qeth_tso_fill_header(card, hdr, new_skb);
 		elements_needed++;
 	} else {
-		hdr = (struct qeth_hdr *)skb_push(new_skb,
+		if (data_offset < 0) {
+			hdr = (struct qeth_hdr *)skb_push(new_skb,
 						sizeof(struct qeth_hdr));
-		qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type);
+			qeth_l3_fill_header(card, hdr, new_skb, ipv,
+						cast_type);
+		} else {
+			qeth_l3_fill_header(card, hdr, new_skb, ipv,
+						cast_type);
+			hdr->hdr.l3.length = new_skb->len - data_offset;
+		}
 	}
 
 	if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -2695,8 +2714,11 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	} else {
 		int elems = qeth_get_elements_no(card, (void *)hdr, new_skb,
 						 elements_needed);
-		if (!elems)
+		if (!elems) {
+			if (data_offset >= 0)
+				kmem_cache_free(qeth_core_header_cache, hdr);
 			goto tx_drop;
+		}
 		elements_needed += elems;
 	}
 
@@ -2709,7 +2731,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 					 elements_needed, ctx);
 	else
 		rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
-					      elements_needed, ctx);
+					elements_needed, ctx, data_offset, 0);
 
 	if (!rc) {
 		card->stats.tx_packets++;
@@ -2737,6 +2759,9 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (ctx != NULL)
 			qeth_eddp_put_context(ctx);
 
+		if (data_offset >= 0)
+			kmem_cache_free(qeth_core_header_cache, hdr);
+
 		if (rc == -EBUSY) {
 			if (new_skb != skb)
 				dev_kfree_skb_any(new_skb);
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index ac1993708ae..210ddb63974 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -136,7 +136,7 @@ static ssize_t qeth_l3_dev_route6_store(struct device *dev,
 		return -EINVAL;
 
 	if (!qeth_is_supported(card, IPA_IPV6)) {
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	return qeth_l3_dev_route_store(card, &card->options.route6,
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 391dd29749f..51b6a05f4d1 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -152,10 +152,8 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
  */
 static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 {
-	struct zfcp_adapter *adapter;
+	struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev);
 
-	down(&zfcp_data.config_sema);
-	adapter = dev_get_drvdata(&ccw_device->dev);
 	switch (event) {
 	case CIO_GONE:
 		dev_warn(&adapter->ccw_device->dev, "device gone\n");
@@ -174,8 +172,6 @@ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 					89, NULL);
 		break;
 	}
-	zfcp_erp_wait(adapter);
-	up(&zfcp_data.config_sema);
 	return 1;
 }
 
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index e984469bb98..56196c98c07 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -39,18 +39,6 @@ struct zfcp_gpn_ft {
 	struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS];
 };
 
-static struct zfcp_port *zfcp_get_port_by_did(struct zfcp_adapter *adapter,
-					      u32 d_id)
-{
-	struct zfcp_port *port;
-
-	list_for_each_entry(port, &adapter->port_list_head, list)
-		if ((port->d_id == d_id) &&
-		    !atomic_test_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status))
-			return port;
-	return NULL;
-}
-
 static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 				   struct fcp_rscn_element *elem)
 {
@@ -341,12 +329,13 @@ void zfcp_test_link(struct zfcp_port *port)
 
 	zfcp_port_get(port);
 	retval = zfcp_fc_adisc(port);
-	if (retval == 0 || retval == -EBUSY)
+	if (retval == 0)
 		return;
 
 	/* send of ADISC was not possible */
 	zfcp_port_put(port);
-	zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
+	if (retval != -EBUSY)
+		zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
 }
 
 static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
@@ -363,7 +352,6 @@ static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
 		if (ret)
 			return ret;
 		zfcp_erp_wait(adapter);
-		zfcp_port_put(adapter->nameserver_port);
 	}
 	return !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED,
 				  &adapter->nameserver_port->status);
@@ -475,7 +463,7 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 	struct zfcp_adapter *adapter = ct->port->adapter;
 	struct zfcp_port *port, *tmp;
 	u32 d_id;
-	int ret = 0, x;
+	int ret = 0, x, last = 0;
 
 	if (ct->status)
 		return -EIO;
@@ -492,19 +480,24 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 	down(&zfcp_data.config_sema);
 
 	/* first entry is the header */
-	for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES; x++) {
+	for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES && !last; x++) {
 		if (x % (ZFCP_GPN_FT_ENTRIES + 1))
 			acc++;
 		else
 			acc = sg_virt(++sg);
 
+		last = acc->control & 0x80;
 		d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 |
 		       acc->port_id[2];
 
 		/* skip the adapter's port and known remote ports */
-		if (acc->wwpn == fc_host_port_name(adapter->scsi_host) ||
-		     zfcp_get_port_by_did(adapter, d_id))
+		if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
+			continue;
+		port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
+		if (port) {
+			zfcp_port_get(port);
 			continue;
+		}
 
 		port = zfcp_port_enqueue(adapter, acc->wwpn,
 					 ZFCP_STATUS_PORT_DID_DID |
@@ -513,8 +506,6 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 			ret = PTR_ERR(port);
 		else
 			zfcp_erp_port_reopen(port, 0, 149, NULL);
-		if (acc->control & 0x80) /* last entry */
-			break;
 	}
 
 	zfcp_erp_wait(adapter);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 19c1ca91387..49dbeb754e5 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -710,10 +710,10 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req)
 
 static int zfcp_fsf_sbal_check(struct zfcp_qdio_queue *queue)
 {
-	spin_lock(&queue->lock);
+	spin_lock_bh(&queue->lock);
 	if (atomic_read(&queue->count))
 		return 1;
-	spin_unlock(&queue->lock);
+	spin_unlock_bh(&queue->lock);
 	return 0;
 }
 
@@ -722,13 +722,13 @@ static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
 	long ret;
 	struct zfcp_qdio_queue *req_q = &adapter->req_q;
 
-	spin_unlock(&req_q->lock);
+	spin_unlock_bh(&req_q->lock);
 	ret = wait_event_interruptible_timeout(adapter->request_wq,
 					zfcp_fsf_sbal_check(req_q), 5 * HZ);
 	if (ret > 0)
 		return 0;
 
-	spin_lock(&req_q->lock);
+	spin_lock_bh(&req_q->lock);
 	return -EIO;
 }
 
@@ -870,14 +870,14 @@ int zfcp_fsf_status_read(struct zfcp_adapter *adapter)
 	volatile struct qdio_buffer_element *sbale;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS,
 				  ZFCP_REQ_NO_QTCB,
 				  adapter->pool.fsf_req_status_read);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -910,7 +910,7 @@ failed_buf:
 	zfcp_fsf_req_free(req);
 	zfcp_hba_dbf_event_fsf_unsol("fail", adapter, NULL);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -988,7 +988,7 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND,
 				  req_flags, adapter->pool.fsf_req_abort);
-	if (unlikely(IS_ERR(req)))
+	if (IS_ERR(req))
 		goto out;
 
 	if (unlikely(!(atomic_read(&unit->status) &
@@ -1106,13 +1106,13 @@ int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool,
 	struct zfcp_fsf_req *req;
 	int ret = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC,
 				  ZFCP_REQ_AUTO_CLEANUP, pool);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		ret = PTR_ERR(req);
 		goto out;
 	}
@@ -1148,7 +1148,7 @@ failed_send:
 	if (erp_action)
 		erp_action->fsf_req = NULL;
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return ret;
 }
 
@@ -1223,7 +1223,7 @@ int zfcp_fsf_send_els(struct zfcp_send_els *els)
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS,
 				  ZFCP_REQ_AUTO_CLEANUP, NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		ret = PTR_ERR(req);
 		goto out;
 	}
@@ -1263,14 +1263,14 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
 	struct zfcp_adapter *adapter = erp_action->adapter;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (!atomic_read(&adapter->req_q.count))
 		goto out;
 	req = zfcp_fsf_req_create(adapter,
 				  FSF_QTCB_EXCHANGE_CONFIG_DATA,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1295,7 +1295,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1306,13 +1306,13 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
 	struct zfcp_fsf_req *req = NULL;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
 				  0, NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1334,7 +1334,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	if (!retval)
 		wait_event(req->completion_wq,
 			   req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
@@ -1359,13 +1359,13 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action)
 	if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
 		return -EOPNOTSUPP;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (!atomic_read(&adapter->req_q.count))
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1385,7 +1385,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1405,13 +1405,13 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
 	if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
 		return -EOPNOTSUPP;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (!atomic_read(&adapter->req_q.count))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
 				  NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1427,7 +1427,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	if (!retval)
 		wait_event(req->completion_wq,
 			   req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
@@ -1531,7 +1531,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
@@ -1539,7 +1539,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 				  FSF_QTCB_OPEN_PORT_WITH_DID,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1562,7 +1562,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1603,14 +1603,14 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PORT,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1633,7 +1633,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1700,14 +1700,14 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PHYSICAL_PORT,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1731,7 +1731,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1875,14 +1875,14 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_OPEN_LUN,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1910,7 +1910,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1965,13 +1965,13 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1995,7 +1995,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -2228,7 +2228,7 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
 				  adapter->pool.fsf_req_scsi);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -2351,7 +2351,7 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
 				  adapter->pool.fsf_req_scsi);
-	if (unlikely(IS_ERR(req)))
+	if (IS_ERR(req))
 		goto out;
 
 	req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
@@ -2417,12 +2417,12 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter,
 		return ERR_PTR(-EINVAL);
 	}
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, fsf_cfdc->command, 0, NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = -EPERM;
 		goto out;
 	}
@@ -2447,7 +2447,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter,
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 
 	if (!retval) {
 		wait_event(req->completion_wq,
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index d6dbd653fde..69d632d851d 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -423,9 +423,9 @@ void zfcp_qdio_close(struct zfcp_adapter *adapter)
 
 	/* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */
 	req_q = &adapter->req_q;
-	spin_lock(&req_q->lock);
+	spin_lock_bh(&req_q->lock);
 	atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
-	spin_unlock(&req_q->lock);
+	spin_unlock_bh(&req_q->lock);
 
 	qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR);
 
diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
index 73a86d09bba..9c129248466 100644
--- a/drivers/sbus/sbus.c
+++ b/drivers/sbus/sbus.c
@@ -7,13 +7,13 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/sbus.h>
 #include <asm/dma.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/bpp.h>
 #include <asm/irq.h>
 
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index c7f06298bd3..4e0322b1c1e 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -63,7 +63,7 @@ comment "SCSI support type (disk, tape, CD-ROM)"
 config BLK_DEV_SD
 	tristate "SCSI disk support"
 	depends on SCSI
-	select CRC_T10DIF
+	select CRC_T10DIF if BLK_DEV_INTEGRITY
 	---help---
 	  If you want to use SCSI hard disks, Fibre Channel disks,
 	  Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
diff --git a/drivers/scsi/arm/acornscsi-io.S b/drivers/scsi/arm/acornscsi-io.S
index 5cebe310526..22171b2110a 100644
--- a/drivers/scsi/arm/acornscsi-io.S
+++ b/drivers/scsi/arm/acornscsi-io.S
@@ -8,7 +8,7 @@
 #include <linux/linkage.h>
 
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #if defined(__APCS_32__)
 #define LOADREGS(t,r,l...)	ldm##t	r, l
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index fcdd73f2562..708e475896b 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -425,7 +425,7 @@ static int alua_check_sense(struct scsi_device *sdev,
 			/*
 			 * LUN Not Accessible - ALUA state transition
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
 			/*
 			 * LUN Not Accessible -- Target port in standby state
@@ -447,18 +447,18 @@ static int alua_check_sense(struct scsi_device *sdev,
 			/*
 			 * Power On, Reset, or Bus Device Reset, just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
 			/*
 			 * ALUA state changed
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		}
 		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
 			/*
 			 * Implicit ALUA state transition failed
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		}
 		break;
 	}
@@ -490,7 +490,7 @@ static int alua_stpg(struct scsi_device *sdev, int state,
 		if (!err)
 			return SCSI_DH_IO;
 		err = alua_check_sense(sdev, &sense_hdr);
-		if (retry > 0 && err == NEEDS_RETRY) {
+		if (retry > 0 && err == ADD_TO_MLQUEUE) {
 			retry--;
 			goto retry;
 		}
@@ -535,7 +535,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
 			return SCSI_DH_IO;
 
 		err = alua_check_sense(sdev, &sense_hdr);
-		if (err == NEEDS_RETRY)
+		if (err == ADD_TO_MLQUEUE)
 			goto retry;
 		sdev_printk(KERN_INFO, sdev,
 			    "%s: rtpg sense code %02x/%02x/%02x\n",
@@ -680,7 +680,7 @@ static int alua_prep_fn(struct scsi_device *sdev, struct request *req)
 
 }
 
-const struct scsi_dh_devlist alua_dev_list[] = {
+static const struct scsi_dh_devlist alua_dev_list[] = {
 	{"HP", "MSA VOLUME" },
 	{"HP", "HSV101" },
 	{"HP", "HSV111" },
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index aa46b131b20..ef693e8412e 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -439,7 +439,7 @@ static int clariion_check_sense(struct scsi_device *sdev,
 			 * Unit Attention Code. This is the first IO
 			 * to the new path, so just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	}
 
@@ -514,7 +514,7 @@ retry:
 			return SCSI_DH_IO;
 
 		err = clariion_check_sense(sdev, &sshdr);
-		if (retry > 0 && err == NEEDS_RETRY) {
+		if (retry > 0 && err == ADD_TO_MLQUEUE) {
 			retry--;
 			goto retry;
 		}
@@ -562,7 +562,7 @@ done:
 	return result;
 }
 
-const struct scsi_dh_devlist clariion_dev_list[] = {
+static const struct scsi_dh_devlist clariion_dev_list[] = {
 	{"DGC", "RAID"},
 	{"DGC", "DISK"},
 	{"DGC", "VRAID"},
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 9c7a1f8ebb7..a6a4ef3ad51 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -282,7 +282,7 @@ static int hp_sw_activate(struct scsi_device *sdev)
 	return ret;
 }
 
-const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
+static const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
 	{"COMPAQ", "MSA1000 VOLUME"},
 	{"COMPAQ", "HSV110"},
 	{"HP", "HSV100"},
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index b093a501f8a..6e2f130d56d 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -376,7 +376,7 @@ static int get_lun(struct scsi_device *sdev, struct rdac_dh_data *h)
 		if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' ||
 		    inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd')
 			return SCSI_DH_NOSYS;
-		h->lun = scsilun_to_int((struct scsi_lun *)inqp->lun);
+		h->lun = inqp->lun[7]; /* Uses only the last byte */
 	}
 	return err;
 }
@@ -386,6 +386,7 @@ static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
 	int err;
 	struct c9_inquiry *inqp;
 
+	h->lun_state = RDAC_LUN_UNOWNED;
 	err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
 	if (err == SCSI_DH_OK) {
 		inqp = &h->inq.c9;
@@ -550,7 +551,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
 			 *
 			 * Just retry and wait.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	case ILLEGAL_REQUEST:
 		if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
@@ -567,14 +568,14 @@ static int rdac_check_sense(struct scsi_device *sdev,
 			/*
 			 * Power On, Reset, or Bus Device Reset, just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	}
 	/* success just means we do not care what scsi-ml does */
 	return SCSI_RETURN_NOT_HANDLED;
 }
 
-const struct scsi_dh_devlist rdac_dev_list[] = {
+static const struct scsi_dh_devlist rdac_dev_list[] = {
 	{"IBM", "1722"},
 	{"IBM", "1724"},
 	{"IBM", "1726"},
diff --git a/drivers/scsi/dpt/dpti_i2o.h b/drivers/scsi/dpt/dpti_i2o.h
index 19406cea6d6..179ad77f6cc 100644
--- a/drivers/scsi/dpt/dpti_i2o.h
+++ b/drivers/scsi/dpt/dpti_i2o.h
@@ -21,7 +21,6 @@
 
 #include <linux/i2o-dev.h>
 
-#include <linux/version.h>
 #include <linux/notifier.h>
 #include <asm/atomic.h>
 
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index da876d3924b..a48e4990fe1 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -25,7 +25,6 @@
 #include <linux/delay.h>
 #include <linux/timer.h>
 #include <linux/spinlock.h>
-#include <linux/hdreg.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/div64.h>
@@ -1249,6 +1248,13 @@ static struct pci_device_id hptiop_id_table[] = {
 	{ PCI_VDEVICE(TTI, 0x3522), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4311), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops },
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ae560bc04f9..4e0b7c8eb32 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -556,11 +556,12 @@ static void ibmvfc_link_down(struct ibmvfc_host *vhost,
 /**
  * ibmvfc_init_host - Start host initialization
  * @vhost:		ibmvfc host struct
+ * @relogin:	is this a re-login?
  *
  * Return value:
  *	nothing
  **/
-static void ibmvfc_init_host(struct ibmvfc_host *vhost)
+static void ibmvfc_init_host(struct ibmvfc_host *vhost, int relogin)
 {
 	struct ibmvfc_target *tgt;
 
@@ -574,6 +575,11 @@ static void ibmvfc_init_host(struct ibmvfc_host *vhost)
 	}
 
 	if (!ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+		if (!relogin) {
+			memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
+			vhost->async_crq.cur = 0;
+		}
+
 		list_for_each_entry(tgt, &vhost->targets, queue)
 			tgt->need_login = 1;
 		scsi_block_requests(vhost->host);
@@ -1059,9 +1065,10 @@ static void ibmvfc_get_starget_port_id(struct scsi_target *starget)
 static int ibmvfc_wait_while_resetting(struct ibmvfc_host *vhost)
 {
 	long timeout = wait_event_timeout(vhost->init_wait_q,
-					  (vhost->state == IBMVFC_ACTIVE ||
-					   vhost->state == IBMVFC_HOST_OFFLINE ||
-					   vhost->state == IBMVFC_LINK_DEAD),
+					  ((vhost->state == IBMVFC_ACTIVE ||
+					    vhost->state == IBMVFC_HOST_OFFLINE ||
+					    vhost->state == IBMVFC_LINK_DEAD) &&
+					   vhost->action == IBMVFC_HOST_ACTION_NONE),
 					  (init_timeout * HZ));
 
 	return timeout ? 0 : -EIO;
@@ -1450,8 +1457,8 @@ static void ibmvfc_scsi_done(struct ibmvfc_event *evt)
 	struct ibmvfc_cmd *vfc_cmd = &evt->xfer_iu->cmd;
 	struct ibmvfc_fcp_rsp *rsp = &vfc_cmd->rsp;
 	struct scsi_cmnd *cmnd = evt->cmnd;
-	int rsp_len = 0;
-	int sense_len = rsp->fcp_sense_len;
+	u32 rsp_len = 0;
+	u32 sense_len = rsp->fcp_sense_len;
 
 	if (cmnd) {
 		if (vfc_cmd->response_flags & IBMVFC_ADAPTER_RESID_VALID)
@@ -1468,7 +1475,7 @@ static void ibmvfc_scsi_done(struct ibmvfc_event *evt)
 				rsp_len = rsp->fcp_rsp_len;
 			if ((sense_len + rsp_len) > SCSI_SENSE_BUFFERSIZE)
 				sense_len = SCSI_SENSE_BUFFERSIZE - rsp_len;
-			if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len)
+			if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len && rsp_len <= 8)
 				memcpy(cmnd->sense_buffer, rsp->data.sense + rsp_len, sense_len);
 
 			ibmvfc_log_error(evt);
@@ -2077,17 +2084,18 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 {
 	const char *desc = ibmvfc_get_ae_desc(crq->event);
 
-	ibmvfc_log(vhost, 3, "%s event received\n", desc);
+	ibmvfc_log(vhost, 3, "%s event received. scsi_id: %lx, wwpn: %lx,"
+		   " node_name: %lx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
 
 	switch (crq->event) {
 	case IBMVFC_AE_LINK_UP:
 	case IBMVFC_AE_RESUME:
 		vhost->events_to_log |= IBMVFC_AE_LINKUP;
-		ibmvfc_init_host(vhost);
+		ibmvfc_init_host(vhost, 1);
 		break;
 	case IBMVFC_AE_SCN_FABRIC:
 		vhost->events_to_log |= IBMVFC_AE_RSCN;
-		ibmvfc_init_host(vhost);
+		ibmvfc_init_host(vhost, 1);
 		break;
 	case IBMVFC_AE_SCN_NPORT:
 	case IBMVFC_AE_SCN_GROUP:
@@ -2133,13 +2141,13 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost)
 			/* Send back a response */
 			rc = ibmvfc_send_crq_init_complete(vhost);
 			if (rc == 0)
-				ibmvfc_init_host(vhost);
+				ibmvfc_init_host(vhost, 0);
 			else
 				dev_err(vhost->dev, "Unable to send init rsp. rc=%ld\n", rc);
 			break;
 		case IBMVFC_CRQ_INIT_COMPLETE:
 			dev_info(vhost->dev, "Partner initialization complete\n");
-			ibmvfc_init_host(vhost);
+			ibmvfc_init_host(vhost, 0);
 			break;
 		default:
 			dev_err(vhost->dev, "Unknown crq message type: %d\n", crq->format);
@@ -3357,8 +3365,6 @@ static void ibmvfc_npiv_login(struct ibmvfc_host *vhost)
 	mad->buffer.va = vhost->login_buf_dma;
 	mad->buffer.len = sizeof(*vhost->login_buf);
 
-	memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
-	vhost->async_crq.cur = 0;
 	ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT_WAIT);
 
 	if (!ibmvfc_send_event(evt, vhost, default_timeout))
@@ -3601,8 +3607,9 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 			}
 		}
 
-		if (vhost->reinit) {
+		if (vhost->reinit && !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
 			vhost->reinit = 0;
+			scsi_block_requests(vhost->host);
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
 		} else {
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 4bf6e374f07..fb3177ab669 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -29,8 +29,8 @@
 #include "viosrp.h"
 
 #define IBMVFC_NAME	"ibmvfc"
-#define IBMVFC_DRIVER_VERSION		"1.0.1"
-#define IBMVFC_DRIVER_DATE		"(July 11, 2008)"
+#define IBMVFC_DRIVER_VERSION		"1.0.2"
+#define IBMVFC_DRIVER_DATE		"(August 14, 2008)"
 
 #define IBMVFC_DEFAULT_TIMEOUT	15
 #define IBMVFC_INIT_TIMEOUT		30
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 6b24b9cdb04..7b1502c0ab6 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1636,7 +1636,7 @@ static unsigned long ibmvscsi_get_desired_dma(struct vio_dev *vdev)
 	unsigned long desired_io = max_requests * sizeof(union viosrp_iu);
 
 	/* add io space for sg data */
-	desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT *
+	desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT * 512 *
 	                     IBMVSCSI_CMDS_PER_LUN_DEFAULT);
 
 	return desired_io;
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index b40a673985a..461331d3dc4 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -102,11 +102,10 @@ static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk)
 	mutex_lock(&idescsi_ref_mutex);
 	scsi = ide_scsi_g(disk);
 	if (scsi) {
-		scsi_host_get(scsi->host);
-		if (ide_device_get(scsi->drive)) {
-			scsi_host_put(scsi->host);
+		if (ide_device_get(scsi->drive))
 			scsi = NULL;
-		}
+		else
+			scsi_host_get(scsi->host);
 	}
 	mutex_unlock(&idescsi_ref_mutex);
 	return scsi;
@@ -114,9 +113,11 @@ static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk)
 
 static void ide_scsi_put(struct ide_scsi_obj *scsi)
 {
+	ide_drive_t *drive = scsi->drive;
+
 	mutex_lock(&idescsi_ref_mutex);
-	ide_device_put(scsi->drive);
 	scsi_host_put(scsi->host);
+	ide_device_put(drive);
 	mutex_unlock(&idescsi_ref_mutex);
 }
 
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 7c615c70ec5..bc9e6ddf41d 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -165,7 +165,6 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/stddef.h>
-#include <linux/version.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index e0657b6f009..4e49fbcfe8a 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -50,7 +50,6 @@
 #ifndef _IPS_H_
    #define _IPS_H_
 
-#include <linux/version.h>
 #include <linux/nmi.h>
    #include <asm/uaccess.h>
    #include <asm/io.h>
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 90272e65957..094b47e94b2 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -27,7 +27,6 @@
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/ctype.h>
-#include <linux/version.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index fc7ac158476..97b763378e7 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_sas.c
- * Version	: v00.00.03.20-rc1
+ * Version     : v00.00.04.01-rc1
  *
  * Authors:
  *	(email-id : megaraidlinux@lsi.com)
@@ -71,6 +71,10 @@ static struct pci_device_id megasas_pci_table[] = {
 	/* ppc IOP */
 	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
 	/* ppc IOP */
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
+	/* gen2*/
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
+	/* gen2*/
 	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
 	/* xscale IOP, vega */
 	{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
@@ -198,6 +202,9 @@ megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
 	 */
 	writel(status, &regs->outbound_intr_status);
 
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_status);
+
 	return 0;
 }
 
@@ -293,6 +300,9 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
 	 */
 	writel(status, &regs->outbound_doorbell_clear);
 
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_doorbell_clear);
+
 	return 0;
 }
 /**
@@ -318,6 +328,99 @@ static struct megasas_instance_template megasas_instance_template_ppc = {
 };
 
 /**
+*	The following functions are defined for gen2 (deviceid : 0x78 0x79)
+*	controllers
+*/
+
+/**
+ * megasas_enable_intr_gen2 -  Enables interrupts
+ * @regs:                      MFI register set
+ */
+static inline void
+megasas_enable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+	writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+	/* write ~0x00000005 (4 & 1) to the intr mask*/
+	writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_gen2 - Disables interrupt
+ * @regs:                      MFI register set
+ */
+static inline void
+megasas_disable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+	u32 mask = 0xFFFFFFFF;
+	writel(mask, &regs->outbound_intr_mask);
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_gen2 - returns the current FW status value
+ * @regs:                      MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
+{
+	return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_gen2 -      Check & clear interrupt
+ * @regs:                              MFI register set
+ */
+static int
+megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+	u32 status;
+	/*
+	 * Check if it is our interrupt
+	 */
+	status = readl(&regs->outbound_intr_status);
+
+	if (!(status & MFI_GEN2_ENABLE_INTERRUPT_MASK))
+		return 1;
+
+	/*
+	 * Clear the interrupt by writing back the same value
+	 */
+	writel(status, &regs->outbound_doorbell_clear);
+
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_status);
+
+	return 0;
+}
+/**
+ * megasas_fire_cmd_gen2 -     Sends command to the FW
+ * @frame_phys_addr :          Physical address of cmd
+ * @frame_count :              Number of frames for the command
+ * @regs :                     MFI register set
+ */
+static inline void
+megasas_fire_cmd_gen2(dma_addr_t frame_phys_addr, u32 frame_count,
+			struct megasas_register_set __iomem *regs)
+{
+	writel((frame_phys_addr | (frame_count<<1))|1,
+			&(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_gen2 = {
+
+	.fire_cmd = megasas_fire_cmd_gen2,
+	.enable_intr = megasas_enable_intr_gen2,
+	.disable_intr = megasas_disable_intr_gen2,
+	.clear_intr = megasas_clear_intr_gen2,
+	.read_fw_status_reg = megasas_read_fw_status_reg_gen2,
+};
+
+/**
 *	This is the end of set of functions & definitions
 * 	specific to ppc (deviceid : 0x60) controllers
 */
@@ -1976,7 +2079,12 @@ static int megasas_init_mfi(struct megasas_instance *instance)
 	/*
 	 * Map the message registers
 	 */
-	instance->base_addr = pci_resource_start(instance->pdev, 0);
+	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
+		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
+		instance->base_addr = pci_resource_start(instance->pdev, 1);
+	} else {
+		instance->base_addr = pci_resource_start(instance->pdev, 0);
+	}
 
 	if (pci_request_regions(instance->pdev, "megasas: LSI")) {
 		printk(KERN_DEBUG "megasas: IO memory region busy!\n");
@@ -1998,6 +2106,10 @@ static int megasas_init_mfi(struct megasas_instance *instance)
 		case PCI_DEVICE_ID_LSI_SAS1078DE:
 			instance->instancet = &megasas_instance_template_ppc;
 			break;
+		case PCI_DEVICE_ID_LSI_SAS1078GEN2:
+		case PCI_DEVICE_ID_LSI_SAS0079GEN2:
+			instance->instancet = &megasas_instance_template_gen2;
+			break;
 		case PCI_DEVICE_ID_LSI_SAS1064R:
 		case PCI_DEVICE_ID_DELL_PERC5:
 		default:
@@ -2857,6 +2969,7 @@ static void megasas_shutdown(struct pci_dev *pdev)
 {
 	struct megasas_instance *instance = pci_get_drvdata(pdev);
 	megasas_flush_cache(instance);
+	megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
 }
 
 /**
@@ -3292,7 +3405,7 @@ megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t coun
 	return retval;
 }
 
-static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl,
+static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl,
 		megasas_sysfs_set_dbg_lvl);
 
 static ssize_t
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index b0c41e67170..0d033248fdf 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -18,9 +18,9 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION			"00.00.03.20-rc1"
-#define MEGASAS_RELDATE			"March 10, 2008"
-#define MEGASAS_EXT_VERSION		"Mon. March 10 11:02:31 PDT 2008"
+#define MEGASAS_VERSION				"00.00.04.01"
+#define MEGASAS_RELDATE				"July 24, 2008"
+#define MEGASAS_EXT_VERSION			"Thu July 24 11:41:51 PST 2008"
 
 /*
  * Device IDs
@@ -28,6 +28,8 @@
 #define	PCI_DEVICE_ID_LSI_SAS1078R		0x0060
 #define	PCI_DEVICE_ID_LSI_SAS1078DE		0x007C
 #define	PCI_DEVICE_ID_LSI_VERDE_ZCR		0x0413
+#define	PCI_DEVICE_ID_LSI_SAS1078GEN2		0x0078
+#define	PCI_DEVICE_ID_LSI_SAS0079GEN2		0x0079
 
 /*
  * =====================================
@@ -580,6 +582,8 @@ struct megasas_ctrl_info {
 #define MEGASAS_COMPLETION_TIMER_INTERVAL      (HZ/10)
 
 #define MFI_REPLY_1078_MESSAGE_INTERRUPT	0x80000000
+#define MFI_REPLY_GEN2_MESSAGE_INTERRUPT	0x00000001
+#define MFI_GEN2_ENABLE_INTERRUPT_MASK		(0x00000001 | 0x00000004)
 
 /*
 * register set for both 1068 and 1078 controllers
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index edf9fdb3cb3..22052bb7bec 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -23,7 +23,6 @@
  *   1.2: PowerPC (big endian) support.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/drivers/scsi/nsp32.h b/drivers/scsi/nsp32.h
index 6715ecb3bfc..9565acf1aa7 100644
--- a/drivers/scsi/nsp32.h
+++ b/drivers/scsi/nsp32.h
@@ -16,7 +16,6 @@
 #ifndef _NSP32_H
 #define _NSP32_H
 
-#include <linux/version.h>
 //#define NSP32_DEBUG 9
 
 /*
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index a221b6ef9fa..24e6cb8396e 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -25,7 +25,6 @@
 
 ***********************************************************************/
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index a319a20ed44..45e7dcb4b34 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -993,6 +993,17 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
 {
 	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+	/*
+	 * At this point all fcport's software-states are cleared.  Perform any
+	 * final cleanup of firmware resources (PCBs and XCBs).
+	 */
+	if (fcport->loop_id != FC_NO_LOOP_ID) {
+		fcport->ha->isp_ops->fabric_logout(fcport->ha, fcport->loop_id,
+		    fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa);
+		fcport->loop_id = FC_NO_LOOP_ID;
+	}
+
 	qla2x00_abort_fcport_cmds(fcport);
 	scsi_target_unblock(&rport->dev);
 }
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 6da31ba9440..94a720eabfd 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2237,6 +2237,7 @@ typedef struct scsi_qla_host {
 #define REGISTER_FDMI_NEEDED	26
 #define FCPORT_UPDATE_NEEDED	27
 #define VP_DPC_NEEDED		28	/* wake up for VP dpc handling */
+#define UNLOADING		29
 
 	uint32_t	device_flags;
 #define DFLG_LOCAL_DEVICES		BIT_0
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 601a6b29750..ee89ddd64aa 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -976,8 +976,9 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
 				    &ha->fw_attributes, &ha->fw_memory_size);
 				qla2x00_resize_request_q(ha);
 				ha->flags.npiv_supported = 0;
-				if ((IS_QLA24XX(ha) || IS_QLA25XX(ha)) &&
-				    (ha->fw_attributes & BIT_2)) {
+				if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) ||
+				     IS_QLA84XX(ha)) &&
+					 (ha->fw_attributes & BIT_2)) {
 					ha->flags.npiv_supported = 1;
 					if ((!ha->max_npiv_vports) ||
 					    ((ha->max_npiv_vports + 1) %
@@ -3251,6 +3252,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 {
 	int rval;
 	uint8_t        status = 0;
+	scsi_qla_host_t *vha;
 
 	if (ha->flags.online) {
 		ha->flags.online = 0;
@@ -3265,6 +3267,8 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 		if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
 			atomic_set(&ha->loop_state, LOOP_DOWN);
 			qla2x00_mark_all_devices_lost(ha, 0);
+			list_for_each_entry(vha, &ha->vp_list, vp_list)
+			       qla2x00_mark_all_devices_lost(vha, 0);
 		} else {
 			if (!atomic_read(&ha->loop_down_timer))
 				atomic_set(&ha->loop_down_timer,
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 874d802edb7..45a3b93eed5 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -879,11 +879,12 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
 	sp->request_sense_ptr += sense_len;
 	sp->request_sense_length -= sense_len;
 	if (sp->request_sense_length != 0)
-		sp->ha->status_srb = sp;
+		sp->fcport->ha->status_srb = sp;
 
 	DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
-	    "cmd=%p pid=%ld\n", __func__, sp->ha->host_no, cp->device->channel,
-	    cp->device->id, cp->device->lun, cp, cp->serial_number));
+	    "cmd=%p pid=%ld\n", __func__, sp->fcport->ha->host_no,
+	    cp->device->channel, cp->device->id, cp->device->lun, cp,
+	    cp->serial_number));
 	if (sense_len)
 		DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
 		    CMD_ACTUAL_SNSLEN(cp)));
@@ -1184,9 +1185,8 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
 		    atomic_read(&fcport->state)));
 
 		cp->result = DID_BUS_BUSY << 16;
-		if (atomic_read(&fcport->state) == FCS_ONLINE) {
-			qla2x00_mark_device_lost(ha, fcport, 1, 1);
-		}
+		if (atomic_read(&fcport->state) == FCS_ONLINE)
+			qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
 		break;
 
 	case CS_RESET:
@@ -1229,7 +1229,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
 
 		/* Check to see if logout occurred. */
 		if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
-			qla2x00_mark_device_lost(ha, fcport, 1, 1);
+			qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
 		break;
 
 	default:
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index bc90d6b8d0a..813bc7784c0 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2686,7 +2686,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *ha,
 		set_bit(VP_IDX_ACQUIRED, &vha->vp_flags);
 		set_bit(VP_DPC_NEEDED, &ha->dpc_flags);
 
-		wake_up_process(ha->dpc_thread);
+		qla2xxx_wake_dpc(ha);
 	}
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 50baf6a1d67..93560cd7278 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -6,7 +6,6 @@
  */
 #include "qla_def.h"
 
-#include <linux/version.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
 #include <linux/smp_lock.h>
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7c8af7ed2a5..26afe44265c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -780,7 +780,8 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha, unsigned int t,
 		sp = pha->outstanding_cmds[cnt];
 		if (!sp)
 			continue;
-		if (ha->vp_idx != sp->ha->vp_idx)
+
+		if (ha->vp_idx != sp->fcport->ha->vp_idx)
 			continue;
 		match = 0;
 		switch (type) {
@@ -1080,9 +1081,7 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *ha, int res)
 		sp = ha->outstanding_cmds[cnt];
 		if (sp) {
 			ha->outstanding_cmds[cnt] = NULL;
-			sp->flags = 0;
 			sp->cmd->result = res;
-			sp->cmd->host_scribble = (unsigned char *)NULL;
 			qla2x00_sp_compl(ha, sp);
 		}
 	}
@@ -1776,10 +1775,15 @@ probe_out:
 static void
 qla2x00_remove_one(struct pci_dev *pdev)
 {
-	scsi_qla_host_t *ha;
+	scsi_qla_host_t *ha, *vha, *temp;
 
 	ha = pci_get_drvdata(pdev);
 
+	list_for_each_entry_safe(vha, temp, &ha->vp_list, vp_list)
+		fc_vport_terminate(vha->fc_vport);
+
+	set_bit(UNLOADING, &ha->dpc_flags);
+
 	qla2x00_dfs_remove(ha);
 
 	qla84xx_put_chip(ha);
@@ -2451,8 +2455,10 @@ qla2x00_do_dpc(void *data)
 void
 qla2xxx_wake_dpc(scsi_qla_host_t *ha)
 {
-	if (ha->dpc_thread)
-		wake_up_process(ha->dpc_thread);
+	struct task_struct *t = ha->dpc_thread;
+
+	if (!test_bit(UNLOADING, &ha->dpc_flags) && t)
+		wake_up_process(t);
 }
 
 /*
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 676c390db35..4160e4caa7b 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.02.01-k6"
+#define QLA2XXX_VERSION      "8.02.01-k7"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	2
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 880051c89bd..39ce3aba1da 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -391,7 +391,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 
 	case HARDWARE_ERROR:
 		if (scmd->device->retry_hwerror)
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		else
 			return SUCCESS;
 
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 84b4879cff1..34d0de6cd51 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1080,7 +1080,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 	 * PDT=1Fh none (no FDD connected to the requested logical unit)
 	 */
 	if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
-	     (result[0] & 0x1f) == 0x1f) {
+	    (result[0] & 0x1f) == 0x1f &&
+	    !scsi_is_wlun(lun)) {
 		SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
 					"scsi scan: peripheral device type"
 					" of 31, no device added\n"));
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 75a64a6cae8..b29360ed0bd 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -366,12 +366,14 @@ spi_transport_rd_attr(rti, "%d\n");
 spi_transport_rd_attr(pcomp_en, "%d\n");
 spi_transport_rd_attr(hold_mcs, "%d\n");
 
-/* we only care about the first child device so we return 1 */
+/* we only care about the first child device that's a real SCSI device
+ * so we return 1 to terminate the iteration when we find it */
 static int child_iter(struct device *dev, void *data)
 {
-	struct scsi_device *sdev = to_scsi_device(dev);
+	if (!scsi_is_sdev_device(dev))
+		return 0;
 
-	spi_dv_device(sdev);
+	spi_dv_device(to_scsi_device(dev));
 	return 1;
 }
 
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 0fe031f003e..1bcf3c33d7f 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -345,14 +345,14 @@ static int ses_enclosure_find_by_addr(struct enclosure_device *edev,
 	return 0;
 }
 
-#define VPD_INQUIRY_SIZE 512
+#define VPD_INQUIRY_SIZE 36
 
 static void ses_match_to_enclosure(struct enclosure_device *edev,
 				   struct scsi_device *sdev)
 {
 	unsigned char *buf = kmalloc(VPD_INQUIRY_SIZE, GFP_KERNEL);
 	unsigned char *desc;
-	int len;
+	u16 vpd_len;
 	struct efd efd = {
 		.addr = 0,
 	};
@@ -372,9 +372,19 @@ static void ses_match_to_enclosure(struct enclosure_device *edev,
 			     VPD_INQUIRY_SIZE, NULL, SES_TIMEOUT, SES_RETRIES))
 		goto free;
 
-	len = (buf[2] << 8) + buf[3];
+	vpd_len = (buf[2] << 8) + buf[3];
+	kfree(buf);
+	buf = kmalloc(vpd_len, GFP_KERNEL);
+	if (!buf)
+		return;
+	cmd[3] = vpd_len >> 8;
+	cmd[4] = vpd_len & 0xff;
+	if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf,
+			     vpd_len, NULL, SES_TIMEOUT, SES_RETRIES))
+		goto free;
+
 	desc = buf + 4;
-	while (desc < buf + len) {
+	while (desc < buf + vpd_len) {
 		enum scsi_protocol proto = desc[0] >> 4;
 		u8 code_set = desc[0] & 0x0f;
 		u8 piv = desc[1] & 0x80;
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index d3b8ebb8377..661f9f21650 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -217,6 +217,18 @@ static int sg_last_dev(void);
 #define SZ_SG_IOVEC sizeof(sg_iovec_t)
 #define SZ_SG_REQ_INFO sizeof(sg_req_info_t)
 
+static int sg_allow_access(struct file *filp, unsigned char *cmd)
+{
+	struct sg_fd *sfp = (struct sg_fd *)filp->private_data;
+	struct request_queue *q = sfp->parentdp->device->request_queue;
+
+	if (sfp->parentdp->device->type == TYPE_SCANNER)
+		return 0;
+
+	return blk_verify_command(&q->cmd_filter,
+				  cmd, filp->f_mode & FMODE_WRITE);
+}
+
 static int
 sg_open(struct inode *inode, struct file *filp)
 {
@@ -689,7 +701,7 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
 		sg_remove_request(sfp, srp);
 		return -EFAULT;
 	}
-	if (read_only && !blk_verify_command(file, cmnd)) {
+	if (read_only && sg_allow_access(file, cmnd)) {
 		sg_remove_request(sfp, srp);
 		return -EPERM;
 	}
@@ -793,6 +805,7 @@ sg_ioctl(struct inode *inode, struct file *filp,
 
 	if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp)))
 		return -ENXIO;
+
 	SCSI_LOG_TIMEOUT(3, printk("sg_ioctl: %s, cmd=0x%x\n",
 				   sdp->disk->disk_name, (int) cmd_in));
 	read_only = (O_RDWR != (filp->f_flags & O_ACCMODE));
@@ -1061,7 +1074,7 @@ sg_ioctl(struct inode *inode, struct file *filp,
 
 			if (copy_from_user(&opcode, siocp->data, 1))
 				return -EFAULT;
-			if (!blk_verify_command(filp, &opcode))
+			if (sg_allow_access(filp, &opcode))
 				return -EPERM;
 		}
 		return sg_scsi_ioctl(filp, sdp->device->request_queue, NULL, p);
@@ -1747,7 +1760,7 @@ st_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages,
                  */
 		flush_dcache_page(pages[i]);
 		/* ?? Is locking needed? I don't think so */
-		/* if (TestSetPageLocked(pages[i]))
+		/* if (!trylock_page(pages[i]))
 		   goto out_unlock; */
         }
 
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 6558a403780..f31c6698419 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -19,7 +19,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/dec21285.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define BAUD_BASE		(mem_fclk_21285/64)
 
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index a97f1ae11f7..9ccc563d873 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1885,7 +1885,7 @@ static int serial8250_startup(struct uart_port *port)
 		 * the interrupt is enabled.  Delays are necessary to
 		 * allow register changes to become visible.
 		 */
-		spin_lock(&up->port.lock);
+		spin_lock_irqsave(&up->port.lock, flags);
 		if (up->port.flags & UPF_SHARE_IRQ)
 			disable_irq_nosync(up->port.irq);
 
@@ -1901,22 +1901,30 @@ static int serial8250_startup(struct uart_port *port)
 
 		if (up->port.flags & UPF_SHARE_IRQ)
 			enable_irq(up->port.irq);
-		spin_unlock(&up->port.lock);
+		spin_unlock_irqrestore(&up->port.lock, flags);
 
 		/*
 		 * If the interrupt is not reasserted, setup a timer to
 		 * kick the UART on a regular basis.
 		 */
 		if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+			up->bugs |= UART_BUG_THRE;
 			pr_debug("ttyS%d - using backup timer\n", port->line);
-			up->timer.function = serial8250_backup_timeout;
-			up->timer.data = (unsigned long)up;
-			mod_timer(&up->timer, jiffies +
-				poll_timeout(up->port.timeout) + HZ / 5);
 		}
 	}
 
 	/*
+	 * The above check will only give an accurate result the first time
+	 * the port is opened so this value needs to be preserved.
+	 */
+	if (up->bugs & UART_BUG_THRE) {
+		up->timer.function = serial8250_backup_timeout;
+		up->timer.data = (unsigned long)up;
+		mod_timer(&up->timer, jiffies +
+			  poll_timeout(up->port.timeout) + HZ / 5);
+	}
+
+	/*
 	 * If the "interrupt" for this port doesn't correspond with any
 	 * hardware interrupt, we use a timer-based system.  The original
 	 * driver used to do this with IRQ0.
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 78c00162b04..520260326f3 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -47,6 +47,7 @@ struct serial8250_config {
 #define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
 #define UART_BUG_NOMSR	(1 << 2)	/* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_THRE	(1 << 3)	/* UART has buggy THRE reassertion */
 
 #define PROBE_RSA	(1 << 0)
 #define PROBE_ANY	(~0)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3b4a14e355c..77cb34270fc 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -449,6 +449,7 @@ config SERIAL_CLPS711X_CONSOLE
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
 	depends on ARM && PLAT_S3C24XX
+	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
 	  providing /dev/ttySAC0, 1 and 2 (note, some machines may not
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 3a0bbbe17aa..7e7383e890d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
-obj-$(CONFIG_V850E_UART) += v850e_uart.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
 obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 1fee12c1f4f..3a6da80b081 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -42,11 +42,11 @@
 #include <asm/io.h>
 
 #include <asm/mach/serial_at91.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #ifdef CONFIG_ARM
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
+#include <mach/cpu.h>
+#include <mach/gpio.h>
 #endif
 
 #define PDC_BUFFER_SIZE		512
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 9d8543762a3..4a0d30bed9f 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -28,7 +28,7 @@
 #endif
 
 #include <asm/gpio.h>
-#include <asm/mach/bfin_serial_5xx.h>
+#include <mach/bfin_serial_5xx.h>
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
 #include <linux/dma-mapping.h>
@@ -817,7 +817,7 @@ static void bfin_serial_set_ldisc(struct uart_port *port)
 	if (line >= port->info->port.tty->driver->num)
 		return;
 
-	switch (port->info->port.tty->ldisc.num) {
+	switch (port->info->port.tty->termios->c_line) {
 	case N_IRDA:
 		val = UART_GET_GCTL(&bfin_serial_ports[line]);
 		val |= (IREN | RPOLC);
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index fc1fa9267c5..459f3420a42 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -39,7 +39,7 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware/clps7111.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 5c76e0ae058..7274b527a3c 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -50,6 +50,15 @@
 
 #define SCC_WAIT_CLOSING 100
 
+#define GPIO_CTS	0
+#define GPIO_RTS	1
+#define GPIO_DCD	2
+#define GPIO_DSR	3
+#define GPIO_DTR	4
+#define GPIO_RI		5
+
+#define NUM_GPIOS	(GPIO_RI+1)
+
 struct uart_cpm_port {
 	struct uart_port	port;
 	u16			rx_nrfifos;
@@ -68,6 +77,7 @@ struct uart_cpm_port {
 	unsigned char		*rx_buf;
 	u32			flags;
 	void			(*set_lineif)(struct uart_cpm_port *);
+	struct clk		*clk;
 	u8			brg;
 	uint			 dp_addr;
 	void			*mem_addr;
@@ -82,6 +92,7 @@ struct uart_cpm_port {
 	int			wait_closing;
 	/* value to combine with opcode to form cpm command */
 	u32			command;
+	int			gpios[NUM_GPIOS];
 };
 
 extern int cpm_uart_nr;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a4f86927a74..25efca5a7a1 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -43,6 +43,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/fs_uart_pd.h>
 #include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -96,13 +99,41 @@ static unsigned int cpm_uart_tx_empty(struct uart_port *port)
 
 static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	/* Whee. Do nothing. */
+	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+	if (pinfo->gpios[GPIO_RTS] >= 0)
+		gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS));
+
+	if (pinfo->gpios[GPIO_DTR] >= 0)
+		gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR));
 }
 
 static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
 {
-	/* Whee. Do nothing. */
-	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+	unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+	if (pinfo->gpios[GPIO_CTS] >= 0) {
+		if (gpio_get_value(pinfo->gpios[GPIO_CTS]))
+			mctrl &= ~TIOCM_CTS;
+	}
+
+	if (pinfo->gpios[GPIO_DSR] >= 0) {
+		if (gpio_get_value(pinfo->gpios[GPIO_DSR]))
+			mctrl &= ~TIOCM_DSR;
+	}
+
+	if (pinfo->gpios[GPIO_DCD] >= 0) {
+		if (gpio_get_value(pinfo->gpios[GPIO_DCD]))
+			mctrl &= ~TIOCM_CAR;
+	}
+
+	if (pinfo->gpios[GPIO_RI] >= 0) {
+		if (!gpio_get_value(pinfo->gpios[GPIO_RI]))
+			mctrl |= TIOCM_RNG;
+	}
+
+	return mctrl;
 }
 
 /*
@@ -566,7 +597,10 @@ static void cpm_uart_set_termios(struct uart_port *port,
 		out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
 	}
 
-	cpm_set_brg(pinfo->brg - 1, baud);
+	if (pinfo->clk)
+		clk_set_rate(pinfo->clk, baud);
+	else
+		cpm_set_brg(pinfo->brg - 1, baud);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -991,14 +1025,23 @@ static int cpm_uart_init_port(struct device_node *np,
 	void __iomem *mem, *pram;
 	int len;
 	int ret;
+	int i;
 
-	data = of_get_property(np, "fsl,cpm-brg", &len);
-	if (!data || len != 4) {
-		printk(KERN_ERR "CPM UART %s has no/invalid "
-		                "fsl,cpm-brg property.\n", np->name);
-		return -EINVAL;
+	data = of_get_property(np, "clock", NULL);
+	if (data) {
+		struct clk *clk = clk_get(NULL, (const char*)data);
+		if (!IS_ERR(clk))
+			pinfo->clk = clk;
+	}
+	if (!pinfo->clk) {
+		data = of_get_property(np, "fsl,cpm-brg", &len);
+		if (!data || len != 4) {
+			printk(KERN_ERR "CPM UART %s has no/invalid "
+			                "fsl,cpm-brg property.\n", np->name);
+			return -EINVAL;
+		}
+		pinfo->brg = *data;
 	}
-	pinfo->brg = *data;
 
 	data = of_get_property(np, "fsl,cpm-command", &len);
 	if (!data || len != 4) {
@@ -1050,6 +1093,9 @@ static int cpm_uart_init_port(struct device_node *np,
 		goto out_pram;
 	}
 
+	for (i = 0; i < NUM_GPIOS; i++)
+		pinfo->gpios[i] = of_get_gpio(np, i);
+
 	return cpm_uart_request_port(&pinfo->port);
 
 out_pram:
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 8249ac49055..bf94a770bb4 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -234,7 +234,7 @@ unsigned long r_alt_ser_baudrate_shadow = 0;
 
 static struct e100_serial rs_table[] = {
 	{ .baud        = DEF_BAUD,
-	  .port        = (unsigned char *)R_SERIAL0_CTRL,
+	  .ioport        = (unsigned char *)R_SERIAL0_CTRL,
 	  .irq         = 1U << 12, /* uses DMA 6 and 7 */
 	  .oclrintradr = R_DMA_CH6_CLR_INTR,
 	  .ofirstadr   = R_DMA_CH6_FIRST,
@@ -288,7 +288,7 @@ static struct e100_serial rs_table[] = {
 },  /* ttyS0 */
 #ifndef CONFIG_SVINTO_SIM
 	{ .baud        = DEF_BAUD,
-	  .port        = (unsigned char *)R_SERIAL1_CTRL,
+	  .ioport        = (unsigned char *)R_SERIAL1_CTRL,
 	  .irq         = 1U << 16, /* uses DMA 8 and 9 */
 	  .oclrintradr = R_DMA_CH8_CLR_INTR,
 	  .ofirstadr   = R_DMA_CH8_FIRST,
@@ -344,7 +344,7 @@ static struct e100_serial rs_table[] = {
 },  /* ttyS1 */
 
 	{ .baud        = DEF_BAUD,
-	  .port        = (unsigned char *)R_SERIAL2_CTRL,
+	  .ioport        = (unsigned char *)R_SERIAL2_CTRL,
 	  .irq         = 1U << 4,  /* uses DMA 2 and 3 */
 	  .oclrintradr = R_DMA_CH2_CLR_INTR,
 	  .ofirstadr   = R_DMA_CH2_FIRST,
@@ -398,7 +398,7 @@ static struct e100_serial rs_table[] = {
  },  /* ttyS2 */
 
 	{ .baud        = DEF_BAUD,
-	  .port        = (unsigned char *)R_SERIAL3_CTRL,
+	  .ioport        = (unsigned char *)R_SERIAL3_CTRL,
 	  .irq         = 1U << 8,  /* uses DMA 4 and 5 */
 	  .oclrintradr = R_DMA_CH4_CLR_INTR,
 	  .ofirstadr   = R_DMA_CH4_FIRST,
@@ -939,7 +939,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
 /* Output */
 #define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK)
 /* Input */
-#define E100_CTS_GET(info) ((info)->port[REG_STATUS] & E100_CTS_MASK)
+#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK)
 
 /* These are typically PA or PB and 0 means 0V, 1 means 3.3V */
 /* Is an output */
@@ -1092,7 +1092,7 @@ e100_rts(struct e100_serial *info, int set)
 	local_irq_save(flags);
 	info->rx_ctrl &= ~E100_RTS_MASK;
 	info->rx_ctrl |= (set ? 0 : E100_RTS_MASK);  /* RTS is active low */
-	info->port[REG_REC_CTRL] = info->rx_ctrl;
+	info->ioport[REG_REC_CTRL] = info->rx_ctrl;
 	local_irq_restore(flags);
 #ifdef SERIAL_DEBUG_IO
 	printk("ser%i rts %i\n", info->line, set);
@@ -1142,7 +1142,7 @@ e100_disable_rx(struct e100_serial *info)
 {
 #ifndef CONFIG_SVINTO_SIM
 	/* disable the receiver */
-	info->port[REG_REC_CTRL] =
+	info->ioport[REG_REC_CTRL] =
 		(info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
 #endif
 }
@@ -1152,7 +1152,7 @@ e100_enable_rx(struct e100_serial *info)
 {
 #ifndef CONFIG_SVINTO_SIM
 	/* enable the receiver */
-	info->port[REG_REC_CTRL] =
+	info->ioport[REG_REC_CTRL] =
 		(info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
 #endif
 }
@@ -1490,7 +1490,7 @@ rs_stop(struct tty_struct *tty)
 			xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
 		}
 
-		*((unsigned long *)&info->port[REG_XOFF]) = xoff;
+		*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
 		local_irq_restore(flags);
 	}
 }
@@ -1513,7 +1513,7 @@ rs_start(struct tty_struct *tty)
 			xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
 		}
 
-		*((unsigned long *)&info->port[REG_XOFF]) = xoff;
+		*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
 		if (!info->uses_dma_out &&
 		    info->xmit.head != info->xmit.tail && info->xmit.buf)
 			e100_enable_serial_tx_ready_irq(info);
@@ -1888,7 +1888,7 @@ static void receive_chars_dma(struct e100_serial *info)
 	handle_all_descr_data(info);
 
 	/* Read the status register to detect errors */
-	rstat = info->port[REG_STATUS];
+	rstat = info->ioport[REG_STATUS];
 	if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
 		DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat));
 	}
@@ -1897,7 +1897,7 @@ static void receive_chars_dma(struct e100_serial *info)
 		/* If we got an error, we must reset it by reading the
 		 * data_in field
 		 */
-		unsigned char data = info->port[REG_DATA];
+		unsigned char data = info->ioport[REG_DATA];
 
 		PROCSTAT(ser_stat[info->line].errors_cnt++);
 		DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n",
@@ -2077,7 +2077,7 @@ static int force_eop_if_needed(struct e100_serial *info)
 	/* We check data_avail bit to determine if data has
 	 * arrived since last time
 	 */
-	unsigned char rstat = info->port[REG_STATUS];
+	unsigned char rstat = info->ioport[REG_STATUS];
 
 	/* error or datavail? */
 	if (rstat & SER_ERROR_MASK) {
@@ -2096,7 +2096,7 @@ static int force_eop_if_needed(struct e100_serial *info)
 		TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n",
 		          rstat | (info->line << 8)));
 		/* Read data to clear status flags */
-		(void)info->port[REG_DATA];
+		(void)info->ioport[REG_DATA];
 
 		info->forced_eop = 0;
 		START_FLUSH_FAST_TIMER(info, "magic");
@@ -2296,7 +2296,7 @@ struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
 	}
 
 	/* Read data and status at the same time */
-	data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
+	data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
 more_data:
 	if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) {
 		DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
@@ -2391,7 +2391,7 @@ more_data:
 
 
 	info->icount.rx++;
-	data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
+	data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
 	if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
 		DEBUG_LOG(info->line, "ser_rx   %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read));
 		goto more_data;
@@ -2413,7 +2413,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
 		return handle_ser_rx_interrupt_no_dma(info);
 	}
 	/* DMA is used */
-	rstat = info->port[REG_STATUS];
+	rstat = info->ioport[REG_STATUS];
 	if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
 		DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
 	}
@@ -2426,7 +2426,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
 		/* If we got an error, we must reset it by reading the
 		 * data_in field
 		 */
-		data = info->port[REG_DATA];
+		data = info->ioport[REG_DATA];
 		DINTR1(DEBUG_LOG(info->line, "ser_rx!  %c\n", data));
 		DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat));
 		if (!data && (rstat & SER_FRAMING_ERR_MASK)) {
@@ -2528,10 +2528,10 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
 		unsigned char rstat;
 		DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char));
 		local_irq_save(flags);
-		rstat = info->port[REG_STATUS];
+		rstat = info->ioport[REG_STATUS];
 		DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
 
-		info->port[REG_TR_DATA] = info->x_char;
+		info->ioport[REG_TR_DATA] = info->x_char;
 		info->icount.tx++;
 		info->x_char = 0;
 		/* We must enable since it is disabled in ser_interrupt */
@@ -2545,7 +2545,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
 		/* We only use normal tx interrupt when sending x_char */
 		DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0));
 		local_irq_save(flags);
-		rstat = info->port[REG_STATUS];
+		rstat = info->ioport[REG_STATUS];
 		DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
 		e100_disable_serial_tx_ready_irq(info);
 		if (info->port.tty->stopped)
@@ -2573,7 +2573,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
 	DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail]));
 	/* Send a byte, rs485 timing is critical so turn of ints */
 	local_irq_save(flags);
-	info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
+	info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
 	info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
 	info->icount.tx++;
 	if (info->xmit.head == info->xmit.tail) {
@@ -2848,7 +2848,7 @@ startup(struct e100_serial * info)
 
 	/* dummy read to reset any serial errors */
 
-	(void)info->port[REG_DATA];
+	(void)info->ioport[REG_DATA];
 
 	/* enable the interrupts */
 	if (info->uses_dma_out)
@@ -2897,7 +2897,7 @@ shutdown(struct e100_serial * info)
 	/* shut down the transmitter and receiver */
 	DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line));
 	e100_disable_rx(info);
-	info->port[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40);
+	info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40);
 
 	/* disable interrupts, reset dma channels */
 	if (info->uses_dma_in) {
@@ -2968,7 +2968,7 @@ change_speed(struct e100_serial *info)
 
 	if (!info->port.tty || !info->port.tty->termios)
 		return;
-	if (!info->port)
+	if (!info->ioport)
 		return;
 
 	cflag = info->port.tty->termios->c_cflag;
@@ -3037,7 +3037,7 @@ change_speed(struct e100_serial *info)
 
 		info->baud = cflag_to_baud(cflag);
 #ifndef CONFIG_SVINTO_SIM
-		info->port[REG_BAUD] = cflag_to_etrax_baud(cflag);
+		info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag);
 #endif /* CONFIG_SVINTO_SIM */
 	}
 
@@ -3097,8 +3097,8 @@ change_speed(struct e100_serial *info)
 
 	/* actually write the control regs to the hardware */
 
-	info->port[REG_TR_CTRL] = info->tx_ctrl;
-	info->port[REG_REC_CTRL] = info->rx_ctrl;
+	info->ioport[REG_TR_CTRL] = info->tx_ctrl;
+	info->ioport[REG_REC_CTRL] = info->rx_ctrl;
 	xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty));
 	xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
 	if (info->port.tty->termios->c_iflag & IXON ) {
@@ -3107,7 +3107,7 @@ change_speed(struct e100_serial *info)
 		xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
 	}
 
-	*((unsigned long *)&info->port[REG_XOFF]) = xoff;
+	*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
 	local_irq_restore(flags);
 #endif /* !CONFIG_SVINTO_SIM */
 
@@ -3156,7 +3156,7 @@ static int rs_raw_write(struct tty_struct *tty,
 #ifdef SERIAL_DEBUG_DATA
 	if (info->line == SERIAL_DEBUG_LINE)
 		printk("rs_raw_write (%d), status %d\n",
-		       count, info->port[REG_STATUS]);
+		       count, info->ioport[REG_STATUS]);
 #endif
 
 #ifdef CONFIG_SVINTO_SIM
@@ -3427,7 +3427,7 @@ get_serial_info(struct e100_serial * info,
 	memset(&tmp, 0, sizeof(tmp));
 	tmp.type = info->type;
 	tmp.line = info->line;
-	tmp.port = (int)info->port;
+	tmp.port = (int)info->ioport;
 	tmp.irq = info->irq;
 	tmp.flags = info->flags;
 	tmp.baud_base = info->baud_base;
@@ -3557,14 +3557,14 @@ char *get_control_state_str(int MLines, char *s)
 }
 #endif
 
-static void
+static int
 rs_break(struct tty_struct *tty, int break_state)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned long flags;
 
-	if (!info->port)
-		return;
+	if (!info->ioport)
+		return -EIO;
 
 	local_irq_save(flags);
 	if (break_state == -1) {
@@ -3575,8 +3575,9 @@ rs_break(struct tty_struct *tty, int break_state)
 		/* Set bit 7 (txd) and 6 (tr_enable) */
 		info->tx_ctrl |= (0x80 | 0x40);
 	}
-	info->port[REG_TR_CTRL] = info->tx_ctrl;
+	info->ioport[REG_TR_CTRL] = info->tx_ctrl;
 	local_irq_restore(flags);
+	return 0;
 }
 
 static int
@@ -4231,9 +4232,9 @@ static int line_info(char *buf, struct e100_serial *info)
 	unsigned long tmp;
 
 	ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
-		      info->line, (unsigned long)info->port, info->irq);
+		      info->line, (unsigned long)info->ioport, info->irq);
 
-	if (!info->port || (info->type == PORT_UNKNOWN)) {
+	if (!info->ioport || (info->type == PORT_UNKNOWN)) {
 		ret += sprintf(buf+ret, "\n");
 		return ret;
 	}
@@ -4281,7 +4282,7 @@ static int line_info(char *buf, struct e100_serial *info)
 	}
 
 	{
-		unsigned char rstat = info->port[REG_STATUS];
+		unsigned char rstat = info->ioport[REG_STATUS];
 		if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
 			ret += sprintf(buf+ret, " xoff_detect:1");
 	}
@@ -4502,7 +4503,7 @@ rs_init(void)
 
 		if (info->enabled) {
 			printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
-			       serial_driver->name, info->line, (unsigned int)info->port);
+			       serial_driver->name, info->line, (unsigned int)info->ioport);
 		}
 	}
 #ifdef CONFIG_ETRAX_FAST_TIMER
diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
index ccd0f32b737..e3c5c8c3c09 100644
--- a/drivers/serial/crisv10.h
+++ b/drivers/serial/crisv10.h
@@ -36,8 +36,9 @@ struct etrax_recv_buffer {
 };
 
 struct e100_serial {
+	struct tty_port port;
 	int baud;
-	volatile u8	*port;	/* R_SERIALx_CTRL */
+	volatile u8	*ioport;	/* R_SERIALx_CTRL */
 	u32		irq;	/* bitnr in R_IRQ_MASK2 for dmaX_descr */
 
 	/* Output registers */
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index e0da4dc7bbf..3f90f1bbbbc 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -44,8 +44,8 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 /* Register definitions */
 #define URXD0 0x0  /* Receiver Register */
@@ -127,8 +127,13 @@
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz */
-#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz */
+#ifdef CONFIG_ARCH_IMX
+#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
+#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
+#endif
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+#define  UCR3_RXDMUXSEL	 (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
+#endif
 #define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
 #define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
 #define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
@@ -445,7 +450,7 @@ static irqreturn_t imx_int(int irq, void *dev_id)
 			readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
 		imx_txint(irq, dev_id);
 
-	if (sts & USR1_RTSS)
+	if (sts & USR1_RTSD)
 		imx_rtsint(irq, dev_id);
 
 	return IRQ_HANDLED;
@@ -598,6 +603,12 @@ static int imx_startup(struct uart_port *port)
 	temp |= (UCR2_RXEN | UCR2_TXEN);
 	writel(temp, sport->port.membase + UCR2);
 
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+	temp = readl(sport->port.membase + UCR3);
+	temp |= UCR3_RXDMUXSEL;
+	writel(temp, sport->port.membase + UCR3);
+#endif
+
 	/*
 	 * Enable modem status interrupts
 	 */
@@ -1133,13 +1144,19 @@ static int serial_imx_probe(struct platform_device *pdev)
 	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
 		sport->have_rtscts = 1;
 
-	if (pdata->init)
-		pdata->init(pdev);
+	if (pdata->init) {
+		ret = pdata->init(pdev);
+		if (ret)
+			goto clkput;
+	}
 
 	uart_add_one_port(&imx_reg, &sport->port);
 	platform_set_drvdata(pdev, &sport->port);
 
 	return 0;
+clkput:
+	clk_put(sport->clk);
+	clk_disable(sport->clk);
 unmap:
 	iounmap(sport->port.membase);
 free:
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index 9f8ccb735c1..3f489329e8d 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -35,8 +35,8 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
 #define SERIAL_NX_MAJOR	204
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index b9a93f326fb..f7a0d37c422 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -45,9 +45,9 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 
 struct uart_pxa_port {
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index a1102053e55..c8b4266ac35 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -17,10 +17,10 @@
 
 #include <asm/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index c5f03f41686..40a2531b554 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -19,10 +19,10 @@
 #include <linux/serial.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index ce0c220e3e9..d0170319c72 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -19,10 +19,10 @@
 #include <linux/serial.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 38f954bd39c..d4a2b17b249 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -19,10 +19,10 @@
 #include <linux/serial.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index a5e76cc1807..b24a25ea6bc 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -39,7 +39,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/serial_sa1100.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index d852f83f890..5a88b3f9fe9 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -45,10 +45,10 @@
 
 #include <asm/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 0edbc5dd378..b9cbfc87f61 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -26,8 +26,8 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-uart.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-uart.h>
+#include <mach/regs-irq.h>
 
 #if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index cd728df6a01..8a0749e34ca 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -451,19 +451,21 @@ SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
+SCIF_FNS(SCFDR,			     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
 SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
 SCIF_FNS(SCLSR,				0,  0, 0x28, 16)
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-/* SH7763 SCIF2 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 SCIF_FNS(SCFDR,				0,  0, 0x1C, 16)
 SCIF_FNS(SCSPTR2,			0,  0, 0x20, 16)
-SCIF_FNS(SCLSR2, 			0,  0, 0x24, 16)
-#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
+SCIF_FNS(SCLSR2,			0,  0, 0x24, 16)
+SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
+SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
+SCIF_FNS(SCLSR,				0,  0, 0x28, 16)
 #else
 SCIF_FNS(SCFDR,                      0x0e, 16, 0x1C, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index aeeec5588af..e41766d0803 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -17,11 +17,11 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/hypervisor.h>
 #include <asm/spitfire.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/irq.h>
 
 #if defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 15ee497e1c7..29b4458abf7 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -32,11 +32,11 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index e24e6823508..a378464f929 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -35,11 +35,11 @@
 #include <linux/serial_reg.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 0f3d69b86d6..3cb4c8aee13 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -32,11 +32,11 @@
 #include <linux/serio.h>
 #endif
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
deleted file mode 100644
index 5acf061b6cd..00000000000
--- a/drivers/serial/v850e_uart.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * drivers/serial/v850e_uart.c -- Serial I/O using V850E on-chip UART or UARTB
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This driver supports both the original V850E UART interface (called
-   merely `UART' in the docs) and the newer `UARTB' interface, which is
-   roughly a superset of the first one.  The selection is made at
-   configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is
-   presumed, otherwise the old UART -- as these are on-CPU UARTS, a system
-   can never have both.
-
-   The UARTB interface also has a 16-entry FIFO mode, which is not
-   yet supported by this driver.  */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/v850e_uart.h>
-
-/* Initial UART state.  This may be overridden by machine-dependent headers. */
-#ifndef V850E_UART_INIT_BAUD
-#define V850E_UART_INIT_BAUD	115200
-#endif
-#ifndef V850E_UART_INIT_CFLAGS
-#define V850E_UART_INIT_CFLAGS	(B115200 | CS8 | CREAD)
-#endif
-
-/* A string used for prefixing printed descriptions; since the same UART
-   macro is actually used on other chips than the V850E.  This must be a
-   constant string.  */
-#ifndef V850E_UART_CHIP_NAME
-#define V850E_UART_CHIP_NAME	"V850E"
-#endif
-
-#define V850E_UART_MINOR_BASE	64	   /* First tty minor number */
-
-
-/* Low-level UART functions.  */
-
-/* Configure and turn on uart channel CHAN, using the termios `control
-   modes' bits in CFLAGS, and a baud-rate of BAUD.  */
-void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	int flags;
-	v850e_uart_speed_t old_speed;
-	v850e_uart_config_t old_config;
-	v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud);
-	v850e_uart_config_t new_config = v850e_uart_calc_config (cflags);
-
-	/* Disable interrupts while we're twiddling the hardware.  */
-	local_irq_save (flags);
-
-#ifdef V850E_UART_PRE_CONFIGURE
-	V850E_UART_PRE_CONFIGURE (chan, cflags, baud);
-#endif
-
-	old_config = V850E_UART_CONFIG (chan);
-	old_speed = v850e_uart_speed (chan);
-
-	if (! v850e_uart_speed_eq (old_speed, new_speed)) {
-		/* The baud rate has changed.  First, disable the UART.  */
-		V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI;
-		old_config = 0;	/* Force the uart to be re-initialized. */
-
-		/* Reprogram the baud-rate generator.  */
-		v850e_uart_set_speed (chan, new_speed);
-	}
-
-	if (! (old_config & V850E_UART_CONFIG_ENABLED)) {
-		/* If we are using the uart for the first time, start by
-		   enabling it, which must be done before turning on any
-		   other bits.  */
-		V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT;
-		/* See the initial state.  */
-		old_config = V850E_UART_CONFIG (chan);
-	}
-
-	if (new_config != old_config) {
-		/* Which of the TXE/RXE bits we'll temporarily turn off
-		   before changing other control bits.  */
-		unsigned temp_disable = 0;
-		/* Which of the TXE/RXE bits will be enabled.  */
-		unsigned enable = 0;
-		unsigned changed_bits = new_config ^ old_config;
-
-		/* Which of RX/TX will be enabled in the new configuration.  */
-		if (new_config & V850E_UART_CONFIG_RX_BITS)
-			enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE);
-		if (new_config & V850E_UART_CONFIG_TX_BITS)
-			enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE);
-
-		/* Figure out which of RX/TX needs to be disabled; note
-		   that this will only happen if they're not already
-		   disabled.  */
-		if (changed_bits & V850E_UART_CONFIG_RX_BITS)
-			temp_disable
-				|= (old_config & V850E_UART_CONFIG_RX_ENABLE);
-		if (changed_bits & V850E_UART_CONFIG_TX_BITS)
-			temp_disable
-				|= (old_config & V850E_UART_CONFIG_TX_ENABLE);
-
-		/* We have to turn off RX and/or TX mode before changing
-		   any associated control bits.  */
-		if (temp_disable)
-			V850E_UART_CONFIG (chan) = old_config & ~temp_disable;
-
-		/* Write the new control bits, while RX/TX are disabled. */ 
-		if (changed_bits & ~enable)
-			V850E_UART_CONFIG (chan) = new_config & ~enable;
-
-		v850e_uart_config_delay (new_config, new_speed);
-
-		/* Write the final version, with enable bits turned on.  */
-		V850E_UART_CONFIG (chan) = new_config;
-	}
-
-	local_irq_restore (flags);
-}
-
-
-/*  Low-level console. */
-
-#ifdef CONFIG_V850E_UART_CONSOLE
-
-static void v850e_uart_cons_write (struct console *co,
-				   const char *s, unsigned count)
-{
-	if (count > 0) {
-		unsigned chan = co->index;
-		unsigned irq = V850E_UART_TX_IRQ (chan);
-		int irq_was_enabled, irq_was_pending, flags;
-
-		/* We don't want to get `transmission completed'
-		   interrupts, since we're busy-waiting, so we disable them
-		   while sending (we don't disable interrupts entirely
-		   because sending over a serial line is really slow).  We
-		   save the status of the tx interrupt and restore it when
-		   we're done so that using printk doesn't interfere with
-		   normal serial transmission (other than interleaving the
-		   output, of course!).  This should work correctly even if
-		   this function is interrupted and the interrupt printks
-		   something.  */
-
-		/* Disable interrupts while fiddling with tx interrupt.  */
-		local_irq_save (flags);
-		/* Get current tx interrupt status.  */
-		irq_was_enabled = v850e_intc_irq_enabled (irq);
-		irq_was_pending = v850e_intc_irq_pending (irq);
-		/* Disable tx interrupt if necessary.  */
-		if (irq_was_enabled)
-			v850e_intc_disable_irq (irq);
-		/* Turn interrupts back on.  */
-		local_irq_restore (flags);
-
-		/* Send characters.  */
-		while (count > 0) {
-			int ch = *s++;
-
-			if (ch == '\n') {
-				/* We don't have the benefit of a tty
-				   driver, so translate NL into CR LF.  */
-				v850e_uart_wait_for_xmit_ok (chan);
-				v850e_uart_putc (chan, '\r');
-			}
-
-			v850e_uart_wait_for_xmit_ok (chan);
-			v850e_uart_putc (chan, ch);
-
-			count--;
-		}
-
-		/* Restore saved tx interrupt status.  */
-		if (irq_was_enabled) {
-			/* Wait for the last character we sent to be
-			   completely transmitted (as we'll get an
-			   interrupt interrupt at that point).  */
-			v850e_uart_wait_for_xmit_done (chan);
-			/* Clear pending interrupts received due
-			   to our transmission, unless there was already
-			   one pending, in which case we want the
-			   handler to be called.  */
-			if (! irq_was_pending)
-				v850e_intc_clear_pending_irq (irq);
-			/* ... and then turn back on handling.  */
-			v850e_intc_enable_irq (irq);
-		}
-	}
-}
-
-extern struct uart_driver v850e_uart_driver;
-static struct console v850e_uart_cons =
-{
-    .name	= "ttyS",
-    .write	= v850e_uart_cons_write,
-    .device	= uart_console_device,
-    .flags	= CON_PRINTBUFFER,
-    .cflag	= V850E_UART_INIT_CFLAGS,
-    .index	= -1,
-    .data	= &v850e_uart_driver,
-};
-
-void v850e_uart_cons_init (unsigned chan)
-{
-	v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS,
-			      V850E_UART_INIT_BAUD);
-	v850e_uart_cons.index = chan;
-	register_console (&v850e_uart_cons);
-	printk ("Console: %s on-chip UART channel %d\n",
-		V850E_UART_CHIP_NAME, chan);
-}
-
-/* This is what the init code actually calls.  */
-static int v850e_uart_console_init (void)
-{
-	v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL);
-	return 0;
-}
-console_initcall(v850e_uart_console_init);
-
-#define V850E_UART_CONSOLE &v850e_uart_cons
-
-#else /* !CONFIG_V850E_UART_CONSOLE */
-#define V850E_UART_CONSOLE 0
-#endif /* CONFIG_V850E_UART_CONSOLE */
-
-/* TX/RX interrupt handlers.  */
-
-static void v850e_uart_stop_tx (struct uart_port *port);
-
-void v850e_uart_tx (struct uart_port *port)
-{
-	struct circ_buf *xmit = &port->info->xmit;
-	int stopped = uart_tx_stopped (port);
-
-	if (v850e_uart_xmit_ok (port->line)) {
-		int tx_ch;
-
-		if (port->x_char) {
-			tx_ch = port->x_char;
-			port->x_char = 0;
-		} else if (!uart_circ_empty (xmit) && !stopped) {
-			tx_ch = xmit->buf[xmit->tail];
-			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		} else
-			goto no_xmit;
-
-		v850e_uart_putc (port->line, tx_ch);
-		port->icount.tx++;
-
-		if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
-			uart_write_wakeup (port);
-	}
-
- no_xmit:
-	if (uart_circ_empty (xmit) || stopped)
-		v850e_uart_stop_tx (port, stopped);
-}
-
-static irqreturn_t v850e_uart_tx_irq(int irq, void *data)
-{
-	struct uart_port *port = data;
-	v850e_uart_tx (port);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t v850e_uart_rx_irq(int irq, void *data)
-{
-	struct uart_port *port = data;
-	unsigned ch_stat = TTY_NORMAL;
-	unsigned ch = v850e_uart_getc (port->line);
-	unsigned err = v850e_uart_err (port->line);
-
-	if (err) {
-		if (err & V850E_UART_ERR_OVERRUN) {
-			ch_stat = TTY_OVERRUN;
-			port->icount.overrun++;
-		} else if (err & V850E_UART_ERR_FRAME) {
-			ch_stat = TTY_FRAME;
-			port->icount.frame++;
-		} else if (err & V850E_UART_ERR_PARITY) {
-			ch_stat = TTY_PARITY;
-			port->icount.parity++;
-		}
-	}
-
-	port->icount.rx++;
-
-	tty_insert_flip_char (port->info->port.tty, ch, ch_stat);
-	tty_schedule_flip (port->info->port.tty);
-
-	return IRQ_HANDLED;
-}
-
-
-/* Control functions for the serial framework.  */
-
-static void v850e_uart_nop (struct uart_port *port) { }
-static int v850e_uart_success (struct uart_port *port) { return 0; }
-
-static unsigned v850e_uart_tx_empty (struct uart_port *port)
-{
-	return TIOCSER_TEMT;	/* Can't detect.  */
-}
-
-static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl)
-{
-#ifdef V850E_UART_SET_RTS
-	V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS));
-#endif
-}
-
-static unsigned v850e_uart_get_mctrl (struct uart_port *port)
-{
-	/* We don't support DCD or DSR, so consider them permanently active. */
-	int mctrl = TIOCM_CAR | TIOCM_DSR;
-
-	/* We may support CTS.  */
-#ifdef V850E_UART_CTS
-	mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0;
-#else
-	mctrl |= TIOCM_CTS;
-#endif
-
-	return mctrl;
-}
-
-static void v850e_uart_start_tx (struct uart_port *port)
-{
-	v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
-	v850e_uart_tx (port);
-	v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line));
-}
-
-static void v850e_uart_stop_tx (struct uart_port *port)
-{
-	v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
-}
-
-static void v850e_uart_start_rx (struct uart_port *port)
-{
-	v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line));
-}
-
-static void v850e_uart_stop_rx (struct uart_port *port)
-{
-	v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line));
-}
-
-static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl)
-{
-	/* Umm, do this later.  */
-}
-
-static int v850e_uart_startup (struct uart_port *port)
-{
-	int err;
-
-	/* Alloc RX irq.  */
-	err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq,
-			   IRQF_DISABLED, "v850e_uart", port);
-	if (err)
-		return err;
-
-	/* Alloc TX irq.  */
-	err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq,
-			   IRQF_DISABLED, "v850e_uart", port);
-	if (err) {
-		free_irq (V850E_UART_RX_IRQ (port->line), port);
-		return err;
-	}
-
-	v850e_uart_start_rx (port);
-
-	return 0;
-}
-
-static void v850e_uart_shutdown (struct uart_port *port)
-{
-	/* Disable port interrupts.  */
-	free_irq (V850E_UART_TX_IRQ (port->line), port);
-	free_irq (V850E_UART_RX_IRQ (port->line), port);
-
-	/* Turn off xmit/recv enable bits.  */
-	V850E_UART_CONFIG (port->line)
-		&= ~(V850E_UART_CONFIG_TX_ENABLE
-		     | V850E_UART_CONFIG_RX_ENABLE);
-	/* Then reset the channel.  */
-	V850E_UART_CONFIG (port->line) = 0;
-}
-
-static void
-v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios,
-		        struct ktermios *old)
-{
-	unsigned cflags = termios->c_cflag;
-
-	/* Restrict flags to legal values.  */
-	if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8)
-		/* The new value of CSIZE is invalid, use the old value.  */
-		cflags = (cflags & ~CSIZE)
-			| (old ? (old->c_cflag & CSIZE) : CS8);
-
-	termios->c_cflag = cflags;
-
-	v850e_uart_configure (port->line, cflags,
-			      uart_get_baud_rate (port, termios, old,
-						  v850e_uart_min_baud(),
-						  v850e_uart_max_baud()));
-}
-
-static const char *v850e_uart_type (struct uart_port *port)
-{
-	return port->type == PORT_V850E_UART ? "v850e_uart" : 0;
-}
-
-static void v850e_uart_config_port (struct uart_port *port, int flags)
-{
-	if (flags & UART_CONFIG_TYPE)
-		port->type = PORT_V850E_UART;
-}
-
-static int
-v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser)
-{
-	if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART)
-		return -EINVAL;
-	if (ser->irq != V850E_UART_TX_IRQ (port->line))
-		return -EINVAL;
-	return 0;
-}
-
-static struct uart_ops v850e_uart_ops = {
-	.tx_empty	= v850e_uart_tx_empty,
-	.get_mctrl	= v850e_uart_get_mctrl,
-	.set_mctrl	= v850e_uart_set_mctrl,
-	.start_tx	= v850e_uart_start_tx,
-	.stop_tx	= v850e_uart_stop_tx,
-	.stop_rx	= v850e_uart_stop_rx,
-	.enable_ms	= v850e_uart_nop,
-	.break_ctl	= v850e_uart_break_ctl,
-	.startup	= v850e_uart_startup,
-	.shutdown	= v850e_uart_shutdown,
-	.set_termios	= v850e_uart_set_termios,
-	.type		= v850e_uart_type,
-	.release_port	= v850e_uart_nop,
-	.request_port	= v850e_uart_success,
-	.config_port	= v850e_uart_config_port,
-	.verify_port	= v850e_uart_verify_port,
-};
-
-/* Initialization and cleanup.  */
-
-static struct uart_driver v850e_uart_driver = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "v850e_uart",
-	.dev_name		= "ttyS",
-	.major			= TTY_MAJOR,
-	.minor			= V850E_UART_MINOR_BASE,
-	.nr			= V850E_UART_NUM_CHANNELS,
-	.cons			= V850E_UART_CONSOLE,
-};
-
-
-static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS];
-
-static int __init v850e_uart_init (void)
-{
-	int rval;
-
-	printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME);
-
-	rval = uart_register_driver (&v850e_uart_driver);
-	if (rval == 0) {
-		unsigned chan;
-
-		for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) {
-			struct uart_port *port = &v850e_uart_ports[chan];
-			
-			memset (port, 0, sizeof *port);
-
-			port->ops = &v850e_uart_ops;
-			port->line = chan;
-			port->iotype = UPIO_MEM;
-			port->flags = UPF_BOOT_AUTOCONF;
-
-			/* We actually use multiple IRQs, but the serial
-			   framework seems to mainly use this for
-			   informational purposes anyway.  Here we use the TX
-			   irq.  */
-			port->irq = V850E_UART_TX_IRQ (chan);
-
-			/* The serial framework doesn't really use these
-			   membase/mapbase fields for anything useful, but
-			   it requires that they be something non-zero to
-			   consider the port `valid', and also uses them
-			   for informational purposes.  */
-			port->membase = (void *)V850E_UART_BASE_ADDR (chan);
-			port->mapbase = V850E_UART_BASE_ADDR (chan);
-
-			/* The framework insists on knowing the uart's master
-			   clock freq, though it doesn't seem to do anything
-			   useful for us with it.  We must make it at least
-			   higher than (the maximum baud rate * 16), otherwise
-			   the framework will puke during its internal
-			   calculations, and force the baud rate to be 9600.
-			   To be accurate though, just repeat the calculation
-			   we use when actually setting the speed.  */
-			port->uartclk = v850e_uart_max_clock() * 16;
-
-			uart_add_one_port (&v850e_uart_driver, port);
-		}
-	}
-
-	return rval;
-}
-
-static void __exit v850e_uart_exit (void)
-{
-	unsigned chan;
-
-	for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++)
-		uart_remove_one_port (&v850e_uart_driver,
-				      &v850e_uart_ports[chan]);
-
-	uart_unregister_driver (&v850e_uart_driver);
-}
-
-module_init (v850e_uart_init);
-module_exit (v850e_uart_exit);
-
-MODULE_AUTHOR ("Miles Bader");
-MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART");
-MODULE_LICENSE ("GPL");
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 617efb1640b..d1812d32f47 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -2,6 +2,7 @@
  * Core maple bus functionality
  *
  *  Copyright (C) 2007, 2008 Adrian McMenamin
+ *  Copyright (C) 2001 - 2008 Paul Mundt
  *
  * Based on 2.4 code by:
  *
@@ -24,15 +25,14 @@
 #include <linux/slab.h>
 #include <linux/maple.h>
 #include <linux/dma-mapping.h>
+#include <linux/delay.h>
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/maple.h>
-#include <linux/delay.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
 
-MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin");
+MODULE_AUTHOR("Yaegashi Takeshi, Paul Mundt, M. R. Brown, Adrian McMenamin");
 MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
 MODULE_LICENSE("GPL v2");
 MODULE_SUPPORTED_DEVICE("{{SEGA, Dreamcast/Maple}}");
@@ -46,14 +46,15 @@ static DECLARE_WORK(maple_vblank_process, maple_vblank_handler);
 static LIST_HEAD(maple_waitq);
 static LIST_HEAD(maple_sentq);
 
-static DEFINE_MUTEX(maple_list_lock);
+/* mutex to protect queue of waiting packets */
+static DEFINE_MUTEX(maple_wlist_lock);
 
 static struct maple_driver maple_dummy_driver;
 static struct device maple_bus;
 static int subdevice_map[MAPLE_PORTS];
 static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
 static unsigned long maple_pnp_time;
-static int started, scanning, liststatus, fullscan;
+static int started, scanning, fullscan;
 static struct kmem_cache *maple_queue_cache;
 
 struct maple_device_specify {
@@ -65,19 +66,36 @@ static bool checked[4];
 static struct maple_device *baseunits[4];
 
 /**
- *  maple_driver_register - register a device driver
- *  automatically makes the driver bus a maple bus
- *  @drv: the driver to be registered
+ * maple_driver_register - register a maple driver
+ * @drv: maple driver to be registered.
+ *
+ * Registers the passed in @drv, while updating the bus type.
+ * Devices with matching function IDs will be automatically probed.
  */
-int maple_driver_register(struct device_driver *drv)
+int maple_driver_register(struct maple_driver *drv)
 {
 	if (!drv)
 		return -EINVAL;
-	drv->bus = &maple_bus_type;
-	return driver_register(drv);
+
+	drv->drv.bus = &maple_bus_type;
+
+	return driver_register(&drv->drv);
 }
 EXPORT_SYMBOL_GPL(maple_driver_register);
 
+/**
+ * maple_driver_unregister - unregister a maple driver.
+ * @drv: maple driver to unregister.
+ *
+ * Cleans up after maple_driver_register(). To be invoked in the exit
+ * path of any module drivers.
+ */
+void maple_driver_unregister(struct maple_driver *drv)
+{
+	driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(maple_driver_unregister);
+
 /* set hardware registers to enable next round of dma */
 static void maplebus_dma_reset(void)
 {
@@ -131,33 +149,123 @@ static void maple_release_device(struct device *dev)
 
 /**
  * maple_add_packet - add a single instruction to the queue
- * @mq: instruction to add to waiting queue
+ * @mdev: maple device
+ * @function: function on device being queried
+ * @command: maple command to add
+ * @length: length of command string (in 32 bit words)
+ * @data: remainder of command string
  */
-void maple_add_packet(struct mapleq *mq)
+int maple_add_packet(struct maple_device *mdev, u32 function, u32 command,
+	size_t length, void *data)
 {
-	mutex_lock(&maple_list_lock);
-	list_add(&mq->list, &maple_waitq);
-	mutex_unlock(&maple_list_lock);
+	int locking, ret = 0;
+	void *sendbuf = NULL;
+
+	mutex_lock(&maple_wlist_lock);
+	/* bounce if device already locked */
+	locking = mutex_is_locked(&mdev->mq->mutex);
+	if (locking) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	mutex_lock(&mdev->mq->mutex);
+
+	if (length) {
+		sendbuf = kmalloc(length * 4, GFP_KERNEL);
+		if (!sendbuf) {
+			mutex_unlock(&mdev->mq->mutex);
+			ret = -ENOMEM;
+			goto out;
+		}
+		((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+	}
+
+	mdev->mq->command = command;
+	mdev->mq->length = length;
+	if (length > 1)
+		memcpy(sendbuf + 4, data, (length - 1) * 4);
+	mdev->mq->sendbuf = sendbuf;
+
+	list_add(&mdev->mq->list, &maple_waitq);
+out:
+	mutex_unlock(&maple_wlist_lock);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(maple_add_packet);
 
+/**
+ * maple_add_packet_sleeps - add a single instruction to the queue
+ * @mdev: maple device
+ * @function: function on device being queried
+ * @command: maple command to add
+ * @length: length of command string (in 32 bit words)
+ * @data: remainder of command string
+ *
+ * Same as maple_add_packet(), but waits for the lock to become free.
+ */
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+	u32 command, size_t length, void *data)
+{
+	int locking, ret = 0;
+	void *sendbuf = NULL;
+
+	locking = mutex_lock_interruptible(&mdev->mq->mutex);
+	if (locking) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (length) {
+		sendbuf = kmalloc(length * 4, GFP_KERNEL);
+		if (!sendbuf) {
+			mutex_unlock(&mdev->mq->mutex);
+			ret = -ENOMEM;
+			goto out;
+		}
+		((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+	}
+
+	mdev->mq->command = command;
+	mdev->mq->length = length;
+	if (length > 1)
+		memcpy(sendbuf + 4, data, (length - 1) * 4);
+	mdev->mq->sendbuf = sendbuf;
+
+	mutex_lock(&maple_wlist_lock);
+	list_add(&mdev->mq->list, &maple_waitq);
+	mutex_unlock(&maple_wlist_lock);
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(maple_add_packet_sleeps);
+
 static struct mapleq *maple_allocq(struct maple_device *mdev)
 {
 	struct mapleq *mq;
 
 	mq = kmalloc(sizeof(*mq), GFP_KERNEL);
 	if (!mq)
-		return NULL;
+		goto failed_nomem;
 
 	mq->dev = mdev;
 	mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
 	mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp);
-	if (!mq->recvbuf) {
-		kfree(mq);
-		return NULL;
-	}
+	if (!mq->recvbuf)
+		goto failed_p2;
+	/*
+	 * most devices do not need the mutex - but
+	 * anything that injects block reads or writes
+	 * will rely on it
+	 */
+	mutex_init(&mq->mutex);
 
 	return mq;
+
+failed_p2:
+	kfree(mq);
+failed_nomem:
+	return NULL;
 }
 
 static struct maple_device *maple_alloc_dev(int port, int unit)
@@ -178,7 +286,6 @@ static struct maple_device *maple_alloc_dev(int port, int unit)
 	}
 	mdev->dev.bus = &maple_bus_type;
 	mdev->dev.parent = &maple_bus;
-	mdev->function = 0;
 	return mdev;
 }
 
@@ -216,7 +323,6 @@ static void maple_build_block(struct mapleq *mq)
 	*maple_sendptr++ = PHYSADDR(mq->recvbuf);
 	*maple_sendptr++ =
 	    mq->command | (to << 8) | (from << 16) | (len << 24);
-
 	while (len-- > 0)
 		*maple_sendptr++ = *lsendbuf++;
 }
@@ -224,22 +330,27 @@ static void maple_build_block(struct mapleq *mq)
 /* build up command queue */
 static void maple_send(void)
 {
-	int i;
-	int maple_packets;
+	int i, maple_packets = 0;
 	struct mapleq *mq, *nmq;
 
 	if (!list_empty(&maple_sentq))
 		return;
-	if (list_empty(&maple_waitq) || !maple_dma_done())
+	mutex_lock(&maple_wlist_lock);
+	if (list_empty(&maple_waitq) || !maple_dma_done()) {
+		mutex_unlock(&maple_wlist_lock);
 		return;
-	maple_packets = 0;
-	maple_sendptr = maple_lastptr = maple_sendbuf;
+	}
+	mutex_unlock(&maple_wlist_lock);
+	maple_lastptr = maple_sendbuf;
+	maple_sendptr = maple_sendbuf;
+	mutex_lock(&maple_wlist_lock);
 	list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
 		maple_build_block(mq);
 		list_move(&mq->list, &maple_sentq);
 		if (maple_packets++ > MAPLE_MAXPACKETS)
 			break;
 	}
+	mutex_unlock(&maple_wlist_lock);
 	if (maple_packets > 0) {
 		for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++)
 			dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE,
@@ -247,7 +358,8 @@ static void maple_send(void)
 	}
 }
 
-static int attach_matching_maple_driver(struct device_driver *driver,
+/* check if there is a driver registered likely to match this device */
+static int check_matching_maple_driver(struct device_driver *driver,
 					void *devptr)
 {
 	struct maple_driver *maple_drv;
@@ -255,12 +367,8 @@ static int attach_matching_maple_driver(struct device_driver *driver,
 
 	mdev = devptr;
 	maple_drv = to_maple_driver(driver);
-	if (mdev->devinfo.function & be32_to_cpu(maple_drv->function)) {
-		if (maple_drv->connect(mdev) == 0) {
-			mdev->driver = maple_drv;
-			return 1;
-		}
-	}
+	if (mdev->devinfo.function & cpu_to_be32(maple_drv->function))
+		return 1;
 	return 0;
 }
 
@@ -268,11 +376,6 @@ static void maple_detach_driver(struct maple_device *mdev)
 {
 	if (!mdev)
 		return;
-	if (mdev->driver) {
-		if (mdev->driver->disconnect)
-			mdev->driver->disconnect(mdev);
-	}
-	mdev->driver = NULL;
 	device_unregister(&mdev->dev);
 	mdev = NULL;
 }
@@ -328,8 +431,8 @@ static void maple_attach_driver(struct maple_device *mdev)
 			mdev->port, mdev->unit, function);
 
 		matched =
-		    bus_for_each_drv(&maple_bus_type, NULL, mdev,
-				     attach_matching_maple_driver);
+			bus_for_each_drv(&maple_bus_type, NULL, mdev,
+				check_matching_maple_driver);
 
 		if (matched == 0) {
 			/* Driver does not exist yet */
@@ -373,45 +476,48 @@ static int detach_maple_device(struct device *device, void *portptr)
 
 static int setup_maple_commands(struct device *device, void *ignored)
 {
+	int add;
 	struct maple_device *maple_dev = to_maple_dev(device);
 
 	if ((maple_dev->interval > 0)
 	    && time_after(jiffies, maple_dev->when)) {
-		maple_dev->when = jiffies + maple_dev->interval;
-		maple_dev->mq->command = MAPLE_COMMAND_GETCOND;
-		maple_dev->mq->sendbuf = &maple_dev->function;
-		maple_dev->mq->length = 1;
-		maple_add_packet(maple_dev->mq);
-		liststatus++;
+		/* bounce if we cannot lock */
+		add = maple_add_packet(maple_dev,
+			be32_to_cpu(maple_dev->devinfo.function),
+			MAPLE_COMMAND_GETCOND, 1, NULL);
+		if (!add)
+			maple_dev->when = jiffies + maple_dev->interval;
 	} else {
-		if (time_after(jiffies, maple_pnp_time)) {
-			maple_dev->mq->command = MAPLE_COMMAND_DEVINFO;
-			maple_dev->mq->length = 0;
-			maple_add_packet(maple_dev->mq);
-			liststatus++;
-		}
+		if (time_after(jiffies, maple_pnp_time))
+			/* This will also bounce */
+			maple_add_packet(maple_dev, 0,
+				MAPLE_COMMAND_DEVINFO, 0, NULL);
 	}
-
 	return 0;
 }
 
 /* VBLANK bottom half - implemented via workqueue */
 static void maple_vblank_handler(struct work_struct *work)
 {
-	if (!maple_dma_done())
-		return;
-	if (!list_empty(&maple_sentq))
+	if (!list_empty(&maple_sentq) || !maple_dma_done())
 		return;
+
 	ctrl_outl(0, MAPLE_ENABLE);
-	liststatus = 0;
+
 	bus_for_each_dev(&maple_bus_type, NULL, NULL,
 			 setup_maple_commands);
+
 	if (time_after(jiffies, maple_pnp_time))
 		maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
-	if (liststatus && list_empty(&maple_sentq)) {
-		INIT_LIST_HEAD(&maple_sentq);
+
+	mutex_lock(&maple_wlist_lock);
+	if (!list_empty(&maple_waitq) && list_empty(&maple_sentq)) {
+		mutex_unlock(&maple_wlist_lock);
 		maple_send();
+	} else {
+		mutex_unlock(&maple_wlist_lock);
 	}
+
 	maplebus_dma_reset();
 }
 
@@ -422,8 +528,8 @@ static void maple_map_subunits(struct maple_device *mdev, int submask)
 	struct maple_device *mdev_add;
 	struct maple_device_specify ds;
 
+	ds.port = mdev->port;
 	for (k = 0; k < 5; k++) {
-		ds.port = mdev->port;
 		ds.unit = k + 1;
 		retval =
 		    bus_for_each_dev(&maple_bus_type, NULL, &ds,
@@ -437,9 +543,9 @@ static void maple_map_subunits(struct maple_device *mdev, int submask)
 			mdev_add = maple_alloc_dev(mdev->port, k + 1);
 			if (!mdev_add)
 				return;
-			mdev_add->mq->command = MAPLE_COMMAND_DEVINFO;
-			mdev_add->mq->length = 0;
-			maple_add_packet(mdev_add->mq);
+			maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO,
+				0, NULL);
+			/* mark that we are checking sub devices */
 			scanning = 1;
 		}
 		submask = submask >> 1;
@@ -505,6 +611,28 @@ static void maple_response_devinfo(struct maple_device *mdev,
 	}
 }
 
+static void maple_port_rescan(void)
+{
+	int i;
+	struct maple_device *mdev;
+
+	fullscan = 1;
+	for (i = 0; i < MAPLE_PORTS; i++) {
+		if (checked[i] == false) {
+			fullscan = 0;
+			mdev = baseunits[i];
+			/*
+			 *  test lock in case scan has failed
+			 *  but device is still locked
+			 */
+			if (mutex_is_locked(&mdev->mq->mutex))
+				mutex_unlock(&mdev->mq->mutex);
+			maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO,
+				0, NULL);
+		}
+	}
+}
+
 /* maple dma end bottom half - implemented via workqueue */
 static void maple_dma_handler(struct work_struct *work)
 {
@@ -512,7 +640,6 @@ static void maple_dma_handler(struct work_struct *work)
 	struct maple_device *dev;
 	char *recvbuf;
 	enum maple_code code;
-	int i;
 
 	if (!maple_dma_done())
 		return;
@@ -522,6 +649,10 @@ static void maple_dma_handler(struct work_struct *work)
 			recvbuf = mq->recvbuf;
 			code = recvbuf[0];
 			dev = mq->dev;
+			kfree(mq->sendbuf);
+			mutex_unlock(&mq->mutex);
+			list_del_init(&mq->list);
+
 			switch (code) {
 			case MAPLE_RESPONSE_NONE:
 				maple_response_none(dev, mq);
@@ -558,26 +689,16 @@ static void maple_dma_handler(struct work_struct *work)
 				break;
 			}
 		}
-		INIT_LIST_HEAD(&maple_sentq);
+		/* if scanning is 1 then we have subdevices to check */
 		if (scanning == 1) {
 			maple_send();
 			scanning = 2;
 		} else
 			scanning = 0;
-
-		if (!fullscan) {
-			fullscan = 1;
-			for (i = 0; i < MAPLE_PORTS; i++) {
-				if (checked[i] == false) {
-					fullscan = 0;
-					dev = baseunits[i];
-					dev->mq->command =
-						MAPLE_COMMAND_DEVINFO;
-					dev->mq->length = 0;
-					maple_add_packet(dev->mq);
-				}
-			}
-		}
+		/*check if we have actually tested all ports yet */
+		if (!fullscan)
+			maple_port_rescan();
+		/* mark that we have been through the first scan */
 		if (started == 0)
 			started = 1;
 	}
@@ -622,16 +743,14 @@ static int maple_get_dma_buffer(void)
 static int match_maple_bus_driver(struct device *devptr,
 				  struct device_driver *drvptr)
 {
-	struct maple_driver *maple_drv;
-	struct maple_device *maple_dev;
+	struct maple_driver *maple_drv = to_maple_driver(drvptr);
+	struct maple_device *maple_dev = to_maple_dev(devptr);
 
-	maple_drv = container_of(drvptr, struct maple_driver, drv);
-	maple_dev = container_of(devptr, struct maple_device, dev);
 	/* Trap empty port case */
 	if (maple_dev->devinfo.function == 0xFFFFFFFF)
 		return 0;
 	else if (maple_dev->devinfo.function &
-		 be32_to_cpu(maple_drv->function))
+		 cpu_to_be32(maple_drv->function))
 		return 1;
 	return 0;
 }
@@ -713,6 +832,9 @@ static int __init maple_bus_init(void)
 	if (!maple_queue_cache)
 		goto cleanup_bothirqs;
 
+	INIT_LIST_HEAD(&maple_waitq);
+	INIT_LIST_HEAD(&maple_sentq);
+
 	/* setup maple ports */
 	for (i = 0; i < MAPLE_PORTS; i++) {
 		checked[i] = false;
@@ -723,9 +845,7 @@ static int __init maple_bus_init(void)
 				maple_free_dev(mdev[i]);
 			goto cleanup_cache;
 		}
-		mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO;
-		mdev[i]->mq->length = 0;
-		maple_add_packet(mdev[i]->mq);
+		maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL);
 		subdevice_map[i] = 0;
 	}
 
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2303521b4f0..b9d0efb6803 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -149,6 +149,12 @@ config SPI_OMAP24XX
 	  SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
 	  (McSPI) modules.
 
+config SPI_ORION
+	tristate "Orion SPI master (EXPERIMENTAL)"
+	depends on PLAT_ORION && EXPERIMENTAL
+	help
+	  This enables using the SPI master controller on the Orion chips.
+
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
 	depends on ARCH_PXA && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 7fca043ce72..ccf18de34e1 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
 obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
 obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
+obj-$(CONFIG_SPI_ORION)			+= orion_spi.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= mpc52xx_psc_spi.o
 obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 0c716566085..02f9320f3ef 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -20,9 +20,9 @@
 #include <linux/spi/spi.h>
 
 #include <asm/io.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "atmel_spi.h"
 
@@ -184,7 +184,8 @@ static void atmel_spi_next_xfer(struct spi_master *master,
 {
 	struct atmel_spi	*as = spi_master_get_devdata(master);
 	struct spi_transfer	*xfer;
-	u32			len, remaining, total;
+	u32			len, remaining;
+	u32			ieval;
 	dma_addr_t		tx_dma, rx_dma;
 
 	if (!as->current_transfer)
@@ -197,6 +198,8 @@ static void atmel_spi_next_xfer(struct spi_master *master,
 		xfer = NULL;
 
 	if (xfer) {
+		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+
 		len = xfer->len;
 		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
 		remaining = xfer->len - len;
@@ -234,6 +237,8 @@ static void atmel_spi_next_xfer(struct spi_master *master,
 	as->next_transfer = xfer;
 
 	if (xfer) {
+		u32	total;
+
 		total = len;
 		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
 		as->next_remaining_bytes = total - len;
@@ -250,9 +255,11 @@ static void atmel_spi_next_xfer(struct spi_master *master,
 			"  next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
 			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
 			xfer->rx_buf, xfer->rx_dma);
+		ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES);
 	} else {
 		spi_writel(as, RNCR, 0);
 		spi_writel(as, TNCR, 0);
+		ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES);
 	}
 
 	/* REVISIT: We're waiting for ENDRX before we start the next
@@ -265,7 +272,7 @@ static void atmel_spi_next_xfer(struct spi_master *master,
 	 *
 	 * It should be doable, though. Just not now...
 	 */
-	spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+	spi_writel(as, IER, ieval);
 	spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
 }
 
@@ -396,7 +403,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
 
 		ret = IRQ_HANDLED;
 
-		spi_writel(as, IDR, (SPI_BIT(ENDTX) | SPI_BIT(ENDRX)
+		spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
 				     | SPI_BIT(OVRES)));
 
 		/*
@@ -418,7 +425,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
 		if (xfer->delay_usecs)
 			udelay(xfer->delay_usecs);
 
-		dev_warn(master->dev.parent, "fifo overrun (%u/%u remaining)\n",
+		dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n",
 			 spi_readl(as, TCR), spi_readl(as, RCR));
 
 		/*
@@ -442,7 +449,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
 		spi_readl(as, SR);
 
 		atmel_spi_msg_done(master, as, msg, -EIO, 0);
-	} else if (pending & SPI_BIT(ENDRX)) {
+	} else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) {
 		ret = IRQ_HANDLED;
 
 		spi_writel(as, IDR, pending);
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index f6f987bb71c..9d2186fd74a 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -35,8 +35,8 @@
 
 #include <linux/spi/spi.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/dma.h>
+#include <mach/clock.h>
 
 
 #define OMAP2_MCSPI_MAX_FREQ		48000000
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index d9ae111c27a..5515eb97d7c 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -47,12 +47,12 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/omap730.h>	/* OMAP730_IO_CONF registers */
+#include <mach/mux.h>
+#include <mach/omap730.h>	/* OMAP730_IO_CONF registers */
 
 
 /* FIXME address is now a platform device resource,
diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c
new file mode 100644
index 00000000000..c4eaacd6e55
--- /dev/null
+++ b/drivers/spi/orion_spi.c
@@ -0,0 +1,574 @@
+/*
+ * orion_spi.c -- Marvell Orion SPI controller driver
+ *
+ * Author: Shadi Ammouri <shadi@marvell.com>
+ * Copyright (C) 2007-2008 Marvell Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <asm/unaligned.h>
+
+#define DRIVER_NAME			"orion_spi"
+
+#define ORION_NUM_CHIPSELECTS		1 /* only one slave is supported*/
+#define ORION_SPI_WAIT_RDY_MAX_LOOP	2000 /* in usec */
+
+#define ORION_SPI_IF_CTRL_REG		0x00
+#define ORION_SPI_IF_CONFIG_REG		0x04
+#define ORION_SPI_DATA_OUT_REG		0x08
+#define ORION_SPI_DATA_IN_REG		0x0c
+#define ORION_SPI_INT_CAUSE_REG		0x10
+
+#define ORION_SPI_IF_8_16_BIT_MODE	(1 << 5)
+#define ORION_SPI_CLK_PRESCALE_MASK	0x1F
+
+struct orion_spi {
+	struct work_struct	work;
+
+	/* Lock access to transfer list.	*/
+	spinlock_t		lock;
+
+	struct list_head	msg_queue;
+	struct spi_master	*master;
+	void __iomem		*base;
+	unsigned int		max_speed;
+	unsigned int		min_speed;
+	struct orion_spi_info	*spi_info;
+};
+
+static struct workqueue_struct *orion_spi_wq;
+
+static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg)
+{
+	return orion_spi->base + reg;
+}
+
+static inline void
+orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
+{
+	void __iomem *reg_addr = spi_reg(orion_spi, reg);
+	u32 val;
+
+	val = readl(reg_addr);
+	val |= mask;
+	writel(val, reg_addr);
+}
+
+static inline void
+orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
+{
+	void __iomem *reg_addr = spi_reg(orion_spi, reg);
+	u32 val;
+
+	val = readl(reg_addr);
+	val &= ~mask;
+	writel(val, reg_addr);
+}
+
+static int orion_spi_set_transfer_size(struct orion_spi *orion_spi, int size)
+{
+	if (size == 16) {
+		orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
+				  ORION_SPI_IF_8_16_BIT_MODE);
+	} else if (size == 8) {
+		orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
+				  ORION_SPI_IF_8_16_BIT_MODE);
+	} else {
+		pr_debug("Bad bits per word value %d (only 8 or 16 are "
+			 "allowed).\n", size);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
+{
+	u32 tclk_hz;
+	u32 rate;
+	u32 prescale;
+	u32 reg;
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	tclk_hz = orion_spi->spi_info->tclk;
+
+	/*
+	 * the supported rates are: 4,6,8...30
+	 * round up as we look for equal or less speed
+	 */
+	rate = DIV_ROUND_UP(tclk_hz, speed);
+	rate = roundup(rate, 2);
+
+	/* check if requested speed is too small */
+	if (rate > 30)
+		return -EINVAL;
+
+	if (rate < 4)
+		rate = 4;
+
+	/* Convert the rate to SPI clock divisor value.	*/
+	prescale = 0x10 + rate/2;
+
+	reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
+	reg = ((reg & ~ORION_SPI_CLK_PRESCALE_MASK) | prescale);
+	writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
+
+	return 0;
+}
+
+/*
+ * called only when no transfer is active on the bus
+ */
+static int
+orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct orion_spi *orion_spi;
+	unsigned int speed = spi->max_speed_hz;
+	unsigned int bits_per_word = spi->bits_per_word;
+	int	rc;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	if ((t != NULL) && t->speed_hz)
+		speed = t->speed_hz;
+
+	if ((t != NULL) && t->bits_per_word)
+		bits_per_word = t->bits_per_word;
+
+	rc = orion_spi_baudrate_set(spi, speed);
+	if (rc)
+		return rc;
+
+	return orion_spi_set_transfer_size(orion_spi, bits_per_word);
+}
+
+static void orion_spi_set_cs(struct orion_spi *orion_spi, int enable)
+{
+	if (enable)
+		orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
+	else
+		orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
+}
+
+static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi)
+{
+	int i;
+
+	for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) {
+		if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG)))
+			return 1;
+		else
+			udelay(1);
+	}
+
+	return -1;
+}
+
+static inline int
+orion_spi_write_read_8bit(struct spi_device *spi,
+			  const u8 **tx_buf, u8 **rx_buf)
+{
+	void __iomem *tx_reg, *rx_reg, *int_reg;
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+	tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG);
+	rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG);
+	int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG);
+
+	/* clear the interrupt cause register */
+	writel(0x0, int_reg);
+
+	if (tx_buf && *tx_buf)
+		writel(*(*tx_buf)++, tx_reg);
+	else
+		writel(0, tx_reg);
+
+	if (orion_spi_wait_till_ready(orion_spi) < 0) {
+		dev_err(&spi->dev, "TXS timed out\n");
+		return -1;
+	}
+
+	if (rx_buf && *rx_buf)
+		*(*rx_buf)++ = readl(rx_reg);
+
+	return 1;
+}
+
+static inline int
+orion_spi_write_read_16bit(struct spi_device *spi,
+			   const u16 **tx_buf, u16 **rx_buf)
+{
+	void __iomem *tx_reg, *rx_reg, *int_reg;
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+	tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG);
+	rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG);
+	int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG);
+
+	/* clear the interrupt cause register */
+	writel(0x0, int_reg);
+
+	if (tx_buf && *tx_buf)
+		writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg);
+	else
+		writel(0, tx_reg);
+
+	if (orion_spi_wait_till_ready(orion_spi) < 0) {
+		dev_err(&spi->dev, "TXS timed out\n");
+		return -1;
+	}
+
+	if (rx_buf && *rx_buf)
+		put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++);
+
+	return 1;
+}
+
+static unsigned int
+orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
+{
+	struct orion_spi *orion_spi;
+	unsigned int count;
+	int word_len;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+	word_len = spi->bits_per_word;
+	count = xfer->len;
+
+	if (word_len == 8) {
+		const u8 *tx = xfer->tx_buf;
+		u8 *rx = xfer->rx_buf;
+
+		do {
+			if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0)
+				goto out;
+			count--;
+		} while (count);
+	} else if (word_len == 16) {
+		const u16 *tx = xfer->tx_buf;
+		u16 *rx = xfer->rx_buf;
+
+		do {
+			if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0)
+				goto out;
+			count -= 2;
+		} while (count);
+	}
+
+out:
+	return xfer->len - count;
+}
+
+
+static void orion_spi_work(struct work_struct *work)
+{
+	struct orion_spi *orion_spi =
+		container_of(work, struct orion_spi, work);
+
+	spin_lock_irq(&orion_spi->lock);
+	while (!list_empty(&orion_spi->msg_queue)) {
+		struct spi_message *m;
+		struct spi_device *spi;
+		struct spi_transfer *t = NULL;
+		int par_override = 0;
+		int status = 0;
+		int cs_active = 0;
+
+		m = container_of(orion_spi->msg_queue.next, struct spi_message,
+				 queue);
+
+		list_del_init(&m->queue);
+		spin_unlock_irq(&orion_spi->lock);
+
+		spi = m->spi;
+
+		/* Load defaults */
+		status = orion_spi_setup_transfer(spi, NULL);
+
+		if (status < 0)
+			goto msg_done;
+
+		list_for_each_entry(t, &m->transfers, transfer_list) {
+			if (par_override || t->speed_hz || t->bits_per_word) {
+				par_override = 1;
+				status = orion_spi_setup_transfer(spi, t);
+				if (status < 0)
+					break;
+				if (!t->speed_hz && !t->bits_per_word)
+					par_override = 0;
+			}
+
+			if (!cs_active) {
+				orion_spi_set_cs(orion_spi, 1);
+				cs_active = 1;
+			}
+
+			if (t->len)
+				m->actual_length +=
+					orion_spi_write_read(spi, t);
+
+			if (t->delay_usecs)
+				udelay(t->delay_usecs);
+
+			if (t->cs_change) {
+				orion_spi_set_cs(orion_spi, 0);
+				cs_active = 0;
+			}
+		}
+
+msg_done:
+		if (cs_active)
+			orion_spi_set_cs(orion_spi, 0);
+
+		m->status = status;
+		m->complete(m->context);
+
+		spin_lock_irq(&orion_spi->lock);
+	}
+
+	spin_unlock_irq(&orion_spi->lock);
+}
+
+static int __init orion_spi_reset(struct orion_spi *orion_spi)
+{
+	/* Verify that the CS is deasserted */
+	orion_spi_set_cs(orion_spi, 0);
+
+	return 0;
+}
+
+static int orion_spi_setup(struct spi_device *spi)
+{
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	if (spi->mode) {
+		dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
+			spi->mode);
+		return -EINVAL;
+	}
+
+	if (spi->bits_per_word == 0)
+		spi->bits_per_word = 8;
+
+	if ((spi->max_speed_hz == 0)
+			|| (spi->max_speed_hz > orion_spi->max_speed))
+		spi->max_speed_hz = orion_spi->max_speed;
+
+	if (spi->max_speed_hz < orion_spi->min_speed) {
+		dev_err(&spi->dev, "setup: requested speed too low %d Hz\n",
+			spi->max_speed_hz);
+		return -EINVAL;
+	}
+
+	/*
+	 * baudrate & width will be set orion_spi_setup_transfer
+	 */
+	return 0;
+}
+
+static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m)
+{
+	struct orion_spi *orion_spi;
+	struct spi_transfer *t = NULL;
+	unsigned long flags;
+
+	m->actual_length = 0;
+	m->status = 0;
+
+	/* reject invalid messages and transfers */
+	if (list_empty(&m->transfers) || !m->complete)
+		return -EINVAL;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	list_for_each_entry(t, &m->transfers, transfer_list) {
+		unsigned int bits_per_word = spi->bits_per_word;
+
+		if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
+			dev_err(&spi->dev,
+				"message rejected : "
+				"invalid transfer data buffers\n");
+			goto msg_rejected;
+		}
+
+		if ((t != NULL) && t->bits_per_word)
+			bits_per_word = t->bits_per_word;
+
+		if ((bits_per_word != 8) && (bits_per_word != 16)) {
+			dev_err(&spi->dev,
+				"message rejected : "
+				"invalid transfer bits_per_word (%d bits)\n",
+				bits_per_word);
+			goto msg_rejected;
+		}
+		/*make sure buffer length is even when working in 16 bit mode*/
+		if ((t != NULL) && (t->bits_per_word == 16) && (t->len & 1)) {
+			dev_err(&spi->dev,
+				"message rejected : "
+				"odd data length (%d) while in 16 bit mode\n",
+				t->len);
+			goto msg_rejected;
+		}
+
+		if (t->speed_hz < orion_spi->min_speed) {
+			dev_err(&spi->dev,
+				"message rejected : "
+				"device min speed (%d Hz) exceeds "
+				"required transfer speed (%d Hz)\n",
+				orion_spi->min_speed, t->speed_hz);
+			goto msg_rejected;
+		}
+	}
+
+
+	spin_lock_irqsave(&orion_spi->lock, flags);
+	list_add_tail(&m->queue, &orion_spi->msg_queue);
+	queue_work(orion_spi_wq, &orion_spi->work);
+	spin_unlock_irqrestore(&orion_spi->lock, flags);
+
+	return 0;
+msg_rejected:
+	/* Message rejected and not queued */
+	m->status = -EINVAL;
+	if (m->complete)
+		m->complete(m->context);
+	return -EINVAL;
+}
+
+static int __init orion_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct orion_spi *spi;
+	struct resource *r;
+	struct orion_spi_info *spi_info;
+	int status = 0;
+
+	spi_info = pdev->dev.platform_data;
+
+	master = spi_alloc_master(&pdev->dev, sizeof *spi);
+	if (master == NULL) {
+		dev_dbg(&pdev->dev, "master allocation failed\n");
+		return -ENOMEM;
+	}
+
+	if (pdev->id != -1)
+		master->bus_num = pdev->id;
+
+	master->setup = orion_spi_setup;
+	master->transfer = orion_spi_transfer;
+	master->num_chipselect = ORION_NUM_CHIPSELECTS;
+
+	dev_set_drvdata(&pdev->dev, master);
+
+	spi = spi_master_get_devdata(master);
+	spi->master = master;
+	spi->spi_info = spi_info;
+
+	spi->max_speed = DIV_ROUND_UP(spi_info->tclk, 4);
+	spi->min_speed = DIV_ROUND_UP(spi_info->tclk, 30);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		status = -ENODEV;
+		goto out;
+	}
+
+	if (!request_mem_region(r->start, (r->end - r->start) + 1,
+				pdev->dev.bus_id)) {
+		status = -EBUSY;
+		goto out;
+	}
+	spi->base = ioremap(r->start, SZ_1K);
+
+	INIT_WORK(&spi->work, orion_spi_work);
+
+	spin_lock_init(&spi->lock);
+	INIT_LIST_HEAD(&spi->msg_queue);
+
+	if (orion_spi_reset(spi) < 0)
+		goto out_rel_mem;
+
+	status = spi_register_master(master);
+	if (status < 0)
+		goto out_rel_mem;
+
+	return status;
+
+out_rel_mem:
+	release_mem_region(r->start, (r->end - r->start) + 1);
+
+out:
+	spi_master_put(master);
+	return status;
+}
+
+
+static int __exit orion_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct orion_spi *spi;
+	struct resource *r;
+
+	master = dev_get_drvdata(&pdev->dev);
+	spi = spi_master_get_devdata(master);
+
+	cancel_work_sync(&spi->work);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, (r->end - r->start) + 1);
+
+	spi_unregister_master(master);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
+static struct platform_driver orion_spi_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.remove		= __exit_p(orion_spi_remove),
+};
+
+static int __init orion_spi_init(void)
+{
+	orion_spi_wq = create_singlethread_workqueue(
+				orion_spi_driver.driver.name);
+	if (orion_spi_wq == NULL)
+		return -ENOMEM;
+
+	return platform_driver_probe(&orion_spi_driver, orion_spi_probe);
+}
+module_init(orion_spi_init);
+
+static void __exit orion_spi_exit(void)
+{
+	flush_workqueue(orion_spi_wq);
+	platform_driver_unregister(&orion_spi_driver);
+
+	destroy_workqueue(orion_spi_wq);
+}
+module_exit(orion_spi_exit);
+
+MODULE_DESCRIPTION("Orion SPI driver");
+MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 067299d6d19..0e53354c1cf 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -31,15 +31,14 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
 #include <asm/delay.h>
 #include <asm/dma.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
 
 MODULE_AUTHOR("Stephen Street");
 MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
@@ -48,9 +47,10 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 
 #define MAX_BUSES 3
 
-#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+#define DMA_INT_MASK		(DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL	(DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x)	(((x) & 0x07) == 0)
+#define MAX_DMA_LEN		8191
 
 /*
  * for testing SSCR1 changes that require SSP restart, basically
@@ -145,7 +145,6 @@ struct driver_data {
 	size_t tx_map_len;
 	u8 n_bytes;
 	u32 dma_width;
-	int cs_change;
 	int (*write)(struct driver_data *drv_data);
 	int (*read)(struct driver_data *drv_data);
 	irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
@@ -407,8 +406,45 @@ static void giveback(struct driver_data *drv_data)
 					struct spi_transfer,
 					transfer_list);
 
+	/* Delay if requested before any change in chip select */
+	if (last_transfer->delay_usecs)
+		udelay(last_transfer->delay_usecs);
+
+	/* Drop chip select UNLESS cs_change is true or we are returning
+	 * a message with an error, or next message is for another chip
+	 */
 	if (!last_transfer->cs_change)
 		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	else {
+		struct spi_message *next_msg;
+
+		/* Holding of cs was hinted, but we need to make sure
+		 * the next message is for the same chip.  Don't waste
+		 * time with the following tests unless this was hinted.
+		 *
+		 * We cannot postpone this until pump_messages, because
+		 * after calling msg->complete (below) the driver that
+		 * sent the current message could be unloaded, which
+		 * could invalidate the cs_control() callback...
+		 */
+
+		/* get a pointer to the next message, if any */
+		spin_lock_irqsave(&drv_data->lock, flags);
+		if (list_empty(&drv_data->queue))
+			next_msg = NULL;
+		else
+			next_msg = list_entry(drv_data->queue.next,
+					struct spi_message, queue);
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+
+		/* see if the next and current messages point
+		 * to the same chip
+		 */
+		if (next_msg && next_msg->spi != msg->spi)
+			next_msg = NULL;
+		if (!next_msg || msg->state == ERROR_STATE)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	}
 
 	msg->state = NULL;
 	if (msg->complete)
@@ -491,10 +527,9 @@ static void dma_transfer_complete(struct driver_data *drv_data)
 	msg->actual_length += drv_data->len -
 				(drv_data->rx_end - drv_data->rx);
 
-	/* Release chip select if requested, transfer delays are
-	 * handled in pump_transfers */
-	if (drv_data->cs_change)
-		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	/* Transfer delays and chip select release are
+	 * handled in pump_transfers or giveback
+	 */
 
 	/* Move to next transfer */
 	msg->state = next_transfer(drv_data);
@@ -603,10 +638,9 @@ static void int_transfer_complete(struct driver_data *drv_data)
 	drv_data->cur_msg->actual_length += drv_data->len -
 				(drv_data->rx_end - drv_data->rx);
 
-	/* Release chip select if requested, transfer delays are
-	 * handled in pump_transfers */
-	if (drv_data->cs_change)
-		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	/* Transfer delays and chip select release are
+	 * handled in pump_transfers or giveback
+	 */
 
 	/* Move to next transfer */
 	drv_data->cur_msg->state = next_transfer(drv_data);
@@ -841,23 +875,40 @@ static void pump_transfers(unsigned long data)
 		return;
 	}
 
-	/* Delay if requested at end of transfer*/
+	/* Delay if requested at end of transfer before CS change */
 	if (message->state == RUNNING_STATE) {
 		previous = list_entry(transfer->transfer_list.prev,
 					struct spi_transfer,
 					transfer_list);
 		if (previous->delay_usecs)
 			udelay(previous->delay_usecs);
+
+		/* Drop chip select only if cs_change is requested */
+		if (previous->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
 	}
 
-	/* Check transfer length */
-	if (transfer->len > 8191)
-	{
-		dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer "
-				"length greater than 8191\n");
-		message->status = -EINVAL;
-		giveback(drv_data);
-		return;
+	/* Check for transfers that need multiple DMA segments */
+	if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
+
+		/* reject already-mapped transfers; PIO won't always work */
+		if (message->is_dma_mapped
+				|| transfer->rx_dma || transfer->tx_dma) {
+			dev_err(&drv_data->pdev->dev,
+				"pump_transfers: mapped transfer length "
+				"of %lu is greater than %d\n",
+				transfer->len, MAX_DMA_LEN);
+			message->status = -EINVAL;
+			giveback(drv_data);
+			return;
+		}
+
+		/* warn ... we force this to PIO mode */
+		if (printk_ratelimit())
+			dev_warn(&message->spi->dev, "pump_transfers: "
+				"DMA disabled for transfer length %ld "
+				"greater than %d\n",
+				(long)drv_data->len, MAX_DMA_LEN);
 	}
 
 	/* Setup the transfer state based on the type of transfer */
@@ -879,7 +930,6 @@ static void pump_transfers(unsigned long data)
 	drv_data->len = transfer->len & DCMD_LENGTH;
 	drv_data->write = drv_data->tx ? chip->write : null_writer;
 	drv_data->read = drv_data->rx ? chip->read : null_reader;
-	drv_data->cs_change = transfer->cs_change;
 
 	/* Change speed and bit per word on a per transfer */
 	cr0 = chip->cr0;
@@ -926,7 +976,7 @@ static void pump_transfers(unsigned long data)
 							&dma_thresh))
 				if (printk_ratelimit())
 					dev_warn(&message->spi->dev,
-						"pump_transfer: "
+						"pump_transfers: "
 						"DMA burst size reduced to "
 						"match bits_per_word\n");
 		}
@@ -940,8 +990,23 @@ static void pump_transfers(unsigned long data)
 
 	message->state = RUNNING_STATE;
 
-	/* Try to map dma buffer and do a dma transfer if successful */
-	if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+	/* Try to map dma buffer and do a dma transfer if successful, but
+	 * only if the length is non-zero and less than MAX_DMA_LEN.
+	 *
+	 * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
+	 * of PIO instead.  Care is needed above because the transfer may
+	 * have have been passed with buffers that are already dma mapped.
+	 * A zero-length transfer in PIO mode will not try to write/read
+	 * to/from the buffers
+	 *
+	 * REVISIT large transfers are exactly where we most want to be
+	 * using DMA.  If this happens much, split those transfers into
+	 * multiple DMA segments rather than forcing PIO.
+	 */
+	drv_data->dma_mapped = 0;
+	if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
+		drv_data->dma_mapped = map_dma_buffers(drv_data);
+	if (drv_data->dma_mapped) {
 
 		/* Ensure we have the correct interrupt handler */
 		drv_data->transfer_handler = dma_transfer;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 964124b60db..75e86865234 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -226,10 +226,11 @@ EXPORT_SYMBOL_GPL(spi_alloc_device);
  * Companion function to spi_alloc_device.  Devices allocated with
  * spi_alloc_device can be added onto the spi bus with this function.
  *
- * Returns 0 on success; non-zero on failure
+ * Returns 0 on success; negative errno on failure
  */
 int spi_add_device(struct spi_device *spi)
 {
+	static DEFINE_MUTEX(spi_add_lock);
 	struct device *dev = spi->master->dev.parent;
 	int status;
 
@@ -246,26 +247,43 @@ int spi_add_device(struct spi_device *spi)
 			"%s.%u", spi->master->dev.bus_id,
 			spi->chip_select);
 
-	/* drivers may modify this initial i/o setup */
+
+	/* We need to make sure there's no other device with this
+	 * chipselect **BEFORE** we call setup(), else we'll trash
+	 * its configuration.  Lock against concurrent add() calls.
+	 */
+	mutex_lock(&spi_add_lock);
+
+	if (bus_find_device_by_name(&spi_bus_type, NULL, spi->dev.bus_id)
+			!= NULL) {
+		dev_err(dev, "chipselect %d already in use\n",
+				spi->chip_select);
+		status = -EBUSY;
+		goto done;
+	}
+
+	/* Drivers may modify this initial i/o setup, but will
+	 * normally rely on the device being setup.  Devices
+	 * using SPI_CS_HIGH can't coexist well otherwise...
+	 */
 	status = spi->master->setup(spi);
 	if (status < 0) {
 		dev_err(dev, "can't %s %s, status %d\n",
 				"setup", spi->dev.bus_id, status);
-		return status;
+		goto done;
 	}
 
-	/* driver core catches callers that misbehave by defining
-	 * devices that already exist.
-	 */
+	/* Device may be bound to an active driver when this returns */
 	status = device_add(&spi->dev);
-	if (status < 0) {
+	if (status < 0)
 		dev_err(dev, "can't %s %s, status %d\n",
 				"add", spi->dev.bus_id, status);
-		return status;
-	}
+	else
+		dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
 
-	dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
-	return 0;
+done:
+	mutex_unlock(&spi_add_lock);
+	return status;
 }
 EXPORT_SYMBOL_GPL(spi_add_device);
 
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 6fb77fcc497..61ba147e384 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -33,12 +33,11 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
 #include <asm/delay.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-dma.h>
-#include <asm/arch/spi_imx.h>
+#include <mach/hardware.h>
+#include <mach/imx-dma.h>
+#include <mach/spi_imx.h>
 
 /*-------------------------------------------------------------------------*/
 /* SPI Registers offsets from peripheral base address */
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 070c6219e2d..ac0e3e4b3c5 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -267,16 +267,13 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 	cs->hw_mode |= SPMODE_LEN(bits_per_word);
 
 	if ((mpc83xx_spi->spibrg / hz) > 64) {
+		cs->hw_mode |= SPMODE_DIV16;
 		pm = mpc83xx_spi->spibrg / (hz * 64);
 		if (pm > 16) {
-			cs->hw_mode |= SPMODE_DIV16;
-			pm /= 16;
-			if (pm > 16) {
-				dev_err(&spi->dev, "Requested speed is too "
-					"low: %d Hz. Will use %d Hz instead.\n",
-					hz, mpc83xx_spi->spibrg / 1024);
-				pm = 16;
-			}
+			dev_err(&spi->dev, "Requested speed is too "
+				"low: %d Hz. Will use %d Hz instead.\n",
+				hz, mpc83xx_spi->spibrg / 1024);
+			pm = 16;
 		}
 	} else
 		pm = mpc83xx_spi->spibrg / (hz * 4);
@@ -315,11 +312,20 @@ static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 	if (t->bits_per_word)
 		bits_per_word = t->bits_per_word;
 	len = t->len;
-	if (bits_per_word > 8)
+	if (bits_per_word > 8) {
+		/* invalid length? */
+		if (len & 1)
+			return -EINVAL;
 		len /= 2;
-	if (bits_per_word > 16)
+	}
+	if (bits_per_word > 16) {
+		/* invalid length? */
+		if (len & 1)
+			return -EINVAL;
 		len /= 2;
+	}
 	mpc83xx_spi->count = len;
+
 	INIT_COMPLETION(mpc83xx_spi->done);
 
 	/* enable rx ints */
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 1c643c9e1f1..3eb414b84a9 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -25,11 +25,11 @@
 
 #include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/spi.h>
+#include <mach/spi.h>
 
 struct s3c24xx_spi {
 	/* bitbang has to be first */
@@ -236,6 +236,19 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
+static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw)
+{
+	/* for the moment, permanently enable the clock */
+
+	clk_enable(hw->clk);
+
+	/* program defaults into the registers */
+
+	writeb(0xff, hw->regs + S3C2410_SPPRE);
+	writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
+	writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+}
+
 static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 {
 	struct s3c2410_spi_info *pdata;
@@ -327,15 +340,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 		goto err_no_clk;
 	}
 
-	/* for the moment, permanently enable the clock */
-
-	clk_enable(hw->clk);
-
-	/* program defaults into the registers */
-
-	writeb(0xff, hw->regs + S3C2410_SPPRE);
-	writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
-	writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+	s3c24xx_spi_initialsetup(hw);
 
 	/* setup any gpio we can */
 
@@ -415,7 +420,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev)
 {
 	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
 
-	clk_enable(hw->clk);
+	s3c24xx_spi_initialsetup(hw);
 	return 0;
 }
 
@@ -425,7 +430,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev)
 #endif
 
 MODULE_ALIAS("platform:s3c2410-spi");
-static struct platform_driver s3c24xx_spidrv = {
+static struct platform_driver s3c24xx_spi_driver = {
 	.remove		= __exit_p(s3c24xx_spi_remove),
 	.suspend	= s3c24xx_spi_suspend,
 	.resume		= s3c24xx_spi_resume,
@@ -437,12 +442,12 @@ static struct platform_driver s3c24xx_spidrv = {
 
 static int __init s3c24xx_spi_init(void)
 {
-        return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe);
+        return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
 }
 
 static void __exit s3c24xx_spi_exit(void)
 {
-        platform_driver_unregister(&s3c24xx_spidrv);
+        platform_driver_unregister(&s3c24xx_spi_driver);
 }
 
 module_init(s3c24xx_spi_init);
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index e33f6145c56..cc1f647f579 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -21,9 +21,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/spi-gpio.h>
-#include <asm/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/spi-gpio.h>
+#include <mach/hardware.h>
 
 struct s3c2410_spigpio {
 	struct spi_bitbang		 bitbang;
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index d831a2beff3..87ab2443e66 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1165,15 +1165,19 @@ EXPORT_SYMBOL(ssb_dma_translation);
 
 int ssb_dma_set_mask(struct ssb_device *dev, u64 mask)
 {
+#ifdef CONFIG_SSB_PCIHOST
 	int err;
+#endif
 
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
 		err = pci_set_dma_mask(dev->bus->host_pci, mask);
 		if (err)
 			return err;
 		err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask);
 		return err;
+#endif
 	case SSB_BUSTYPE_SSB:
 		return dma_set_mask(dev->dev, mask);
 	default:
@@ -1188,6 +1192,7 @@ void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
 {
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
 		if (gfp_flags & GFP_DMA) {
 			/* Workaround: The PCI API does not support passing
 			 * a GFP flag. */
@@ -1195,6 +1200,7 @@ void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
 						  size, dma_handle, gfp_flags);
 		}
 		return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle);
+#endif
 	case SSB_BUSTYPE_SSB:
 		return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags);
 	default:
@@ -1210,6 +1216,7 @@ void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
 {
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
 		if (gfp_flags & GFP_DMA) {
 			/* Workaround: The PCI API does not support passing
 			 * a GFP flag. */
@@ -1220,6 +1227,7 @@ void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
 		pci_free_consistent(dev->bus->host_pci, size,
 				    vaddr, dma_handle);
 		return;
+#endif
 	case SSB_BUSTYPE_SSB:
 		dma_free_coherent(dev->dev, size, vaddr, dma_handle);
 		return;
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 2e9079df26b..4190be64917 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -33,6 +33,19 @@ config UIO_PDRV
 
 	  If you don't know what to do here, say N.
 
+config UIO_PDRV_GENIRQ
+	tristate "Userspace I/O platform driver with generic IRQ handling"
+	help
+	  Platform driver for Userspace I/O devices, including generic
+	  interrupt handling code. Shared interrupts are not supported.
+
+	  This kernel driver requires that the matching userspace driver
+	  handles interrupts in a special way. Userspace is responsible
+	  for acknowledging the hardware device if needed, and re-enabling
+	  interrupts in the interrupt controller using the write() syscall.
+
+	  If you don't know what to do here, say N.
+
 config UIO_SMX
 	tristate "SMX cryptengine UIO interface"
 	default n
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index e00ce0def1a..8667bbdef90 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_UIO)	+= uio.o
 obj-$(CONFIG_UIO_CIF)	+= uio_cif.o
 obj-$(CONFIG_UIO_PDRV)	+= uio_pdrv.o
+obj-$(CONFIG_UIO_PDRV_GENIRQ)	+= uio_pdrv_genirq.o
 obj-$(CONFIG_UIO_SMX)	+= uio_smx.o
diff --git a/drivers/uio/uio_pdrv.c b/drivers/uio/uio_pdrv.c
index 5d0d2e85d98..0b4ef39cd85 100644
--- a/drivers/uio/uio_pdrv.c
+++ b/drivers/uio/uio_pdrv.c
@@ -88,6 +88,8 @@ static int uio_pdrv_remove(struct platform_device *pdev)
 
 	uio_unregister_device(pdata->uioinfo);
 
+	kfree(pdata);
+
 	return 0;
 }
 
@@ -114,5 +116,5 @@ module_exit(uio_pdrv_exit);
 
 MODULE_AUTHOR("Uwe Kleine-Koenig");
 MODULE_DESCRIPTION("Userspace I/O platform driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
new file mode 100644
index 00000000000..1f82c83a92a
--- /dev/null
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -0,0 +1,188 @@
+/*
+ * drivers/uio/uio_pdrv_genirq.c
+ *
+ * Userspace I/O platform driver with generic IRQ handling code.
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on uio_pdrv.c by Uwe Kleine-Koenig,
+ * Copyright (C) 2008 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/uio_driver.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/stringify.h>
+
+#define DRIVER_NAME "uio_pdrv_genirq"
+
+struct uio_pdrv_genirq_platdata {
+	struct uio_info *uioinfo;
+	spinlock_t lock;
+	unsigned long flags;
+};
+
+static irqreturn_t uio_pdrv_genirq_handler(int irq, struct uio_info *dev_info)
+{
+	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
+
+	/* Just disable the interrupt in the interrupt controller, and
+	 * remember the state so we can allow user space to enable it later.
+	 */
+
+	if (!test_and_set_bit(0, &priv->flags))
+		disable_irq_nosync(irq);
+
+	return IRQ_HANDLED;
+}
+
+static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
+{
+	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
+	unsigned long flags;
+
+	/* Allow user space to enable and disable the interrupt
+	 * in the interrupt controller, but keep track of the
+	 * state to prevent per-irq depth damage.
+	 *
+	 * Serialize this operation to support multiple tasks.
+	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (irq_on) {
+		if (test_and_clear_bit(0, &priv->flags))
+			enable_irq(dev_info->irq);
+	} else {
+		if (!test_and_set_bit(0, &priv->flags))
+			disable_irq(dev_info->irq);
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int uio_pdrv_genirq_probe(struct platform_device *pdev)
+{
+	struct uio_info *uioinfo = pdev->dev.platform_data;
+	struct uio_pdrv_genirq_platdata *priv;
+	struct uio_mem *uiomem;
+	int ret = -EINVAL;
+	int i;
+
+	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
+		dev_err(&pdev->dev, "missing platform_data\n");
+		goto bad0;
+	}
+
+	if (uioinfo->handler || uioinfo->irqcontrol || uioinfo->irq_flags) {
+		dev_err(&pdev->dev, "interrupt configuration error\n");
+		goto bad0;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "unable to kmalloc\n");
+		goto bad0;
+	}
+
+	priv->uioinfo = uioinfo;
+	spin_lock_init(&priv->lock);
+	priv->flags = 0; /* interrupt is enabled to begin with */
+
+	uiomem = &uioinfo->mem[0];
+
+	for (i = 0; i < pdev->num_resources; ++i) {
+		struct resource *r = &pdev->resource[i];
+
+		if (r->flags != IORESOURCE_MEM)
+			continue;
+
+		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+			dev_warn(&pdev->dev, "device has more than "
+					__stringify(MAX_UIO_MAPS)
+					" I/O memory resources.\n");
+			break;
+		}
+
+		uiomem->memtype = UIO_MEM_PHYS;
+		uiomem->addr = r->start;
+		uiomem->size = r->end - r->start + 1;
+		++uiomem;
+	}
+
+	while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
+		uiomem->size = 0;
+		++uiomem;
+	}
+
+	/* This driver requires no hardware specific kernel code to handle
+	 * interrupts. Instead, the interrupt handler simply disables the
+	 * interrupt in the interrupt controller. User space is responsible
+	 * for performing hardware specific acknowledge and re-enabling of
+	 * the interrupt in the interrupt controller.
+	 *
+	 * Interrupt sharing is not supported.
+	 */
+
+	uioinfo->irq_flags = IRQF_DISABLED;
+	uioinfo->handler = uio_pdrv_genirq_handler;
+	uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
+	uioinfo->priv = priv;
+
+	ret = uio_register_device(&pdev->dev, priv->uioinfo);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to register uio device\n");
+		goto bad1;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	return 0;
+ bad1:
+	kfree(priv);
+ bad0:
+	return ret;
+}
+
+static int uio_pdrv_genirq_remove(struct platform_device *pdev)
+{
+	struct uio_pdrv_genirq_platdata *priv = platform_get_drvdata(pdev);
+
+	uio_unregister_device(priv->uioinfo);
+	kfree(priv);
+	return 0;
+}
+
+static struct platform_driver uio_pdrv_genirq = {
+	.probe = uio_pdrv_genirq_probe,
+	.remove = uio_pdrv_genirq_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init uio_pdrv_genirq_init(void)
+{
+	return platform_driver_register(&uio_pdrv_genirq);
+}
+
+static void __exit uio_pdrv_genirq_exit(void)
+{
+	platform_driver_unregister(&uio_pdrv_genirq);
+}
+
+module_init(uio_pdrv_genirq_init);
+module_exit(uio_pdrv_genirq_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Userspace I/O platform driver with generic IRQ handling");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 755823cdf62..bcefbddeba5 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -95,16 +95,18 @@ config USB
 
 source "drivers/usb/core/Kconfig"
 
+source "drivers/usb/mon/Kconfig"
+
 source "drivers/usb/host/Kconfig"
 
+source "drivers/usb/musb/Kconfig"
+
 source "drivers/usb/class/Kconfig"
 
 source "drivers/usb/storage/Kconfig"
 
 source "drivers/usb/image/Kconfig"
 
-source "drivers/usb/mon/Kconfig"
-
 comment "USB port drivers"
 	depends on USB
 
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 507a9bd0d77..9aea43a8c4a 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -602,7 +602,7 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ
 			offd = le32_to_cpu(buf[offb++]);
 			if (offd >= size) {
 				if (printk_ratelimit())
-					usb_err(instance->usbatm, "wrong index #%x in response to cm #%x\n",
+					usb_err(instance->usbatm, "wrong index %#x in response to cm %#x\n",
 						offd, cm);
 				ret = -EIO;
 				goto cleanup;
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index cb01b5106ef..b6483dd98ac 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -64,7 +64,6 @@
 #include <linux/ctype.h>
 #include <linux/sched.h>
 #include <linux/kthread.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0725b1871f2..c257453fa9d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -51,6 +51,7 @@
  */
 
 #undef DEBUG
+#undef VERBOSE_DEBUG
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -70,6 +71,9 @@
 
 #include "cdc-acm.h"
 
+
+#define ACM_CLOSE_TIMEOUT	15	/* seconds to let writes drain */
+
 /*
  * Version Information
  */
@@ -85,6 +89,12 @@ static DEFINE_MUTEX(open_mutex);
 
 #define ACM_READY(acm)	(acm && acm->dev && acm->used)
 
+#ifdef VERBOSE_DEBUG
+#define verbose	1
+#else
+#define verbose	0
+#endif
+
 /*
  * Functions for ACM control messages.
  */
@@ -136,19 +146,17 @@ static int acm_wb_alloc(struct acm *acm)
 static int acm_wb_is_avail(struct acm *acm)
 {
 	int i, n;
+	unsigned long flags;
 
 	n = ACM_NW;
+	spin_lock_irqsave(&acm->write_lock, flags);
 	for (i = 0; i < ACM_NW; i++) {
 		n -= acm->wb[i].use;
 	}
+	spin_unlock_irqrestore(&acm->write_lock, flags);
 	return n;
 }
 
-static inline int acm_wb_is_used(struct acm *acm, int wbn)
-{
-	return acm->wb[wbn].use;
-}
-
 /*
  * Finish write.
  */
@@ -157,7 +165,6 @@ static void acm_write_done(struct acm *acm, struct acm_wb *wb)
 	unsigned long flags;
 
 	spin_lock_irqsave(&acm->write_lock, flags);
-	acm->write_ready = 1;
 	wb->use = 0;
 	acm->transmitting--;
 	spin_unlock_irqrestore(&acm->write_lock, flags);
@@ -190,40 +197,25 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb)
 static int acm_write_start(struct acm *acm, int wbn)
 {
 	unsigned long flags;
-	struct acm_wb *wb;
+	struct acm_wb *wb = &acm->wb[wbn];
 	int rc;
 
 	spin_lock_irqsave(&acm->write_lock, flags);
 	if (!acm->dev) {
+		wb->use = 0;
 		spin_unlock_irqrestore(&acm->write_lock, flags);
 		return -ENODEV;
 	}
 
-	if (!acm->write_ready) {
-		spin_unlock_irqrestore(&acm->write_lock, flags);
-		return 0;	/* A white lie */
-	}
-
-	wb = &acm->wb[wbn];
-	if(acm_wb_is_avail(acm) <= 1)
-		acm->write_ready = 0;
-
 	dbg("%s susp_count: %d", __func__, acm->susp_count);
 	if (acm->susp_count) {
-		acm->old_ready = acm->write_ready;
 		acm->delayed_wb = wb;
-		acm->write_ready = 0;
 		schedule_work(&acm->waker);
 		spin_unlock_irqrestore(&acm->write_lock, flags);
 		return 0;	/* A white lie */
 	}
 	usb_mark_last_busy(acm->dev);
 
-	if (!acm_wb_is_used(acm, wbn)) {
-		spin_unlock_irqrestore(&acm->write_lock, flags);
-		return 0;
-	}
-
 	rc = acm_start_wb(acm, wb);
 	spin_unlock_irqrestore(&acm->write_lock, flags);
 
@@ -488,22 +480,28 @@ urbs:
 /* data interface wrote those outgoing bytes */
 static void acm_write_bulk(struct urb *urb)
 {
-	struct acm *acm;
 	struct acm_wb *wb = urb->context;
+	struct acm *acm = wb->instance;
 
-	dbg("Entering acm_write_bulk with status %d", urb->status);
+	if (verbose || urb->status
+			|| (urb->actual_length != urb->transfer_buffer_length))
+		dev_dbg(&acm->data->dev, "tx %d/%d bytes -- > %d\n",
+			urb->actual_length,
+			urb->transfer_buffer_length,
+			urb->status);
 
-	acm = wb->instance;
 	acm_write_done(acm, wb);
 	if (ACM_READY(acm))
 		schedule_work(&acm->work);
+	else
+		wake_up_interruptible(&acm->drain_wait);
 }
 
 static void acm_softint(struct work_struct *work)
 {
 	struct acm *acm = container_of(work, struct acm, work);
-	dbg("Entering acm_softint.");
-	
+
+	dev_vdbg(&acm->data->dev, "tx work\n");
 	if (!ACM_READY(acm))
 		return;
 	tty_wakeup(acm->tty);
@@ -512,7 +510,6 @@ static void acm_softint(struct work_struct *work)
 static void acm_waker(struct work_struct *waker)
 {
 	struct acm *acm = container_of(waker, struct acm, waker);
-	long flags;
 	int rv;
 
 	rv = usb_autopm_get_interface(acm->control);
@@ -524,9 +521,6 @@ static void acm_waker(struct work_struct *waker)
 		acm_start_wb(acm, acm->delayed_wb);
 		acm->delayed_wb = NULL;
 	}
-	spin_lock_irqsave(&acm->write_lock, flags);
-	acm->write_ready = acm->old_ready;
-	spin_unlock_irqrestore(&acm->write_lock, flags);
 	usb_autopm_put_interface(acm->control);
 }
 
@@ -595,8 +589,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	tasklet_schedule(&acm->urb_task);
 
 done:
-err_out:
 	mutex_unlock(&acm->mutex);
+err_out:
 	mutex_unlock(&open_mutex);
 	return rv;
 
@@ -628,6 +622,8 @@ static void acm_tty_unregister(struct acm *acm)
 	kfree(acm);
 }
 
+static int acm_tty_chars_in_buffer(struct tty_struct *tty);
+
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm = tty->driver_data;
@@ -642,6 +638,13 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 		if (acm->dev) {
 			usb_autopm_get_interface(acm->control);
 			acm_set_control(acm, acm->ctrlout = 0);
+
+			/* try letting the last writes drain naturally */
+			wait_event_interruptible_timeout(acm->drain_wait,
+					(ACM_NW == acm_wb_is_avail(acm))
+						|| !acm->dev,
+					ACM_CLOSE_TIMEOUT * HZ);
+
 			usb_kill_urb(acm->ctrlurb);
 			for (i = 0; i < ACM_NW; i++)
 				usb_kill_urb(acm->wb[i].urb);
@@ -697,7 +700,7 @@ static int acm_tty_write_room(struct tty_struct *tty)
 	 * Do not let the line discipline to know that we have a reserve,
 	 * or it might get too enthusiastic.
 	 */
-	return (acm->write_ready && acm_wb_is_avail(acm)) ? acm->writesize : 0;
+	return acm_wb_is_avail(acm) ? acm->writesize : 0;
 }
 
 static int acm_tty_chars_in_buffer(struct tty_struct *tty)
@@ -1072,11 +1075,11 @@ skip_normal_probe:
 	acm->urb_task.data = (unsigned long) acm;
 	INIT_WORK(&acm->work, acm_softint);
 	INIT_WORK(&acm->waker, acm_waker);
+	init_waitqueue_head(&acm->drain_wait);
 	spin_lock_init(&acm->throttle_lock);
 	spin_lock_init(&acm->write_lock);
 	spin_lock_init(&acm->read_lock);
 	mutex_init(&acm->mutex);
-	acm->write_ready = 1;
 	acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
 
 	buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
@@ -1108,9 +1111,11 @@ skip_normal_probe:
 		rcv->instance = acm;
 	}
 	for (i = 0; i < num_rx_buf; i++) {
-		struct acm_rb *buf = &(acm->rb[i]);
+		struct acm_rb *rb = &(acm->rb[i]);
 
-		if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
+		rb->base = usb_buffer_alloc(acm->dev, readsize,
+				GFP_KERNEL, &rb->dma);
+		if (!rb->base) {
 			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
 			goto alloc_fail7;
 		}
@@ -1172,6 +1177,7 @@ skip_countries:
 	acm_set_line(acm, &acm->line);
 
 	usb_driver_claim_interface(&acm_driver, data_interface, acm);
+	usb_set_intfdata(data_interface, acm);
 
 	usb_get_intf(control_interface);
 	tty_register_device(acm_tty_driver, minor, &control_interface->dev);
@@ -1221,11 +1227,11 @@ static void acm_disconnect(struct usb_interface *intf)
 	struct acm *acm = usb_get_intfdata(intf);
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 
-	mutex_lock(&open_mutex);
-	if (!acm || !acm->dev) {
-		mutex_unlock(&open_mutex);
+	/* sibling interface is already cleaning up */
+	if (!acm)
 		return;
-	}
+
+	mutex_lock(&open_mutex);
 	if (acm->country_codes){
 		device_remove_file(&acm->control->dev,
 				&dev_attr_wCountryCodes);
@@ -1356,6 +1362,9 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 85c3aaaab7c..1f95e7aa1b6 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -106,8 +106,6 @@ struct acm {
 	struct list_head spare_read_bufs;
 	struct list_head filled_read_bufs;
 	int write_used;					/* number of non-empty write buffers */
-	int write_ready;				/* write urb is not running */
-	int old_ready;
 	int processing;
 	int transmitting;
 	spinlock_t write_lock;
@@ -115,6 +113,7 @@ struct acm {
 	struct usb_cdc_line_coding line;		/* bits, stop, parity */
 	struct work_struct work;			/* work queue entry for line discipline waking up */
 	struct work_struct waker;
+	wait_queue_head_t drain_wait;			/* close processing */
 	struct tasklet_struct urb_task;                 /* rx processing */
 	spinlock_t throttle_lock;			/* synchronize throtteling and read callback */
 	unsigned int ctrlin;				/* input control lines (DCD, DSR, RI, break, overruns) */
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ddb54e14a5c..5a7fa6f0995 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -230,6 +230,13 @@ static int usb_probe_interface(struct device *dev)
 		 */
 		intf->pm_usage_cnt = !(driver->supports_autosuspend);
 
+		/* Carry out a deferred switch to altsetting 0 */
+		if (intf->needs_altsetting0) {
+			usb_set_interface(udev, intf->altsetting[0].
+					desc.bInterfaceNumber, 0);
+			intf->needs_altsetting0 = 0;
+		}
+
 		error = driver->probe(intf, id);
 		if (error) {
 			mark_quiesced(intf);
@@ -266,8 +273,17 @@ static int usb_unbind_interface(struct device *dev)
 
 	driver->disconnect(intf);
 
-	/* reset other interface state */
-	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
+	/* Reset other interface state.
+	 * We cannot do a Set-Interface if the device is suspended or
+	 * if it is prepared for a system sleep (since installing a new
+	 * altsetting means creating new endpoint device entries).
+	 * When either of these happens, defer the Set-Interface.
+	 */
+	if (!error && intf->dev.power.status == DPM_ON)
+		usb_set_interface(udev, intf->altsetting[0].
+				desc.bInterfaceNumber, 0);
+	else
+		intf->needs_altsetting0 = 1;
 	usb_set_intfdata(intf, NULL);
 
 	intf->condition = USB_INTERFACE_UNBOUND;
@@ -774,7 +790,6 @@ void usb_deregister(struct usb_driver *driver)
 }
 EXPORT_SYMBOL_GPL(usb_deregister);
 
-
 /* Forced unbinding of a USB interface driver, either because
  * it doesn't support pre_reset/post_reset/reset_resume or
  * because it doesn't support suspend/resume.
@@ -799,7 +814,8 @@ void usb_forced_unbind_intf(struct usb_interface *intf)
  * The caller must hold @intf's device's lock, but not its pm_mutex
  * and not @intf->dev.sem.
  *
- * FIXME: The caller must block system sleep transitions.
+ * Note: Rebinds will be skipped if a system sleep transition is in
+ * progress and the PM "complete" callback hasn't occurred yet.
  */
 void usb_rebind_intf(struct usb_interface *intf)
 {
@@ -815,12 +831,16 @@ void usb_rebind_intf(struct usb_interface *intf)
 	}
 
 	/* Try to rebind the interface */
-	intf->needs_binding = 0;
-	rc = device_attach(&intf->dev);
-	if (rc < 0)
-		dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+	if (intf->dev.power.status == DPM_ON) {
+		intf->needs_binding = 0;
+		rc = device_attach(&intf->dev);
+		if (rc < 0)
+			dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+	}
 }
 
+#ifdef CONFIG_PM
+
 #define DO_UNBIND	0
 #define DO_REBIND	1
 
@@ -828,7 +848,6 @@ void usb_rebind_intf(struct usb_interface *intf)
  * or rebind interfaces that have been unbound, according to @action.
  *
  * The caller must hold @udev's device lock.
- * FIXME: For rebinds, the caller must block system sleep transitions.
  */
 static void do_unbind_rebind(struct usb_device *udev, int action)
 {
@@ -850,30 +869,14 @@ static void do_unbind_rebind(struct usb_device *udev, int action)
 				}
 				break;
 			case DO_REBIND:
-				if (intf->needs_binding) {
-
-	/* FIXME: The next line is needed because we are going to probe
-	 * the interface, but as far as the PM core is concerned the
-	 * interface is still suspended.  The problem wouldn't exist
-	 * if we could rebind the interface during the interface's own
-	 * resume() call, but at the time the usb_device isn't locked!
-	 *
-	 * The real solution will be to carry this out during the device's
-	 * complete() callback.  Until that is implemented, we have to
-	 * use this hack.
-	 */
-//					intf->dev.power.sleeping = 0;
-
+				if (intf->needs_binding)
 					usb_rebind_intf(intf);
-				}
 				break;
 			}
 		}
 	}
 }
 
-#ifdef CONFIG_PM
-
 /* Caller has locked udev's pm_mutex */
 static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
 {
@@ -927,14 +930,14 @@ static int usb_resume_device(struct usb_device *udev)
 }
 
 /* Caller has locked intf's usb_device's pm mutex */
-static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
+static int usb_suspend_interface(struct usb_device *udev,
+		struct usb_interface *intf, pm_message_t msg)
 {
 	struct usb_driver	*driver;
 	int			status = 0;
 
 	/* with no hardware, USB interfaces only use FREEZE and ON states */
-	if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
-			!is_active(intf))
+	if (udev->state == USB_STATE_NOTATTACHED || !is_active(intf))
 		goto done;
 
 	if (intf->condition == USB_INTERFACE_UNBOUND)	/* This can't happen */
@@ -945,7 +948,7 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
 		status = driver->suspend(intf, msg);
 		if (status == 0)
 			mark_quiesced(intf);
-		else if (!interface_to_usbdev(intf)->auto_pm)
+		else if (!udev->auto_pm)
 			dev_err(&intf->dev, "%s error %d\n",
 					"suspend", status);
 	} else {
@@ -962,13 +965,13 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
 }
 
 /* Caller has locked intf's usb_device's pm_mutex */
-static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
+static int usb_resume_interface(struct usb_device *udev,
+		struct usb_interface *intf, int reset_resume)
 {
 	struct usb_driver	*driver;
 	int			status = 0;
 
-	if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
-			is_active(intf))
+	if (udev->state == USB_STATE_NOTATTACHED || is_active(intf))
 		goto done;
 
 	/* Don't let autoresume interfere with unbinding */
@@ -976,8 +979,17 @@ static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
 		goto done;
 
 	/* Can't resume it if it doesn't have a driver. */
-	if (intf->condition == USB_INTERFACE_UNBOUND)
+	if (intf->condition == USB_INTERFACE_UNBOUND) {
+
+		/* Carry out a deferred switch to altsetting 0 */
+		if (intf->needs_altsetting0 &&
+				intf->dev.power.status == DPM_ON) {
+			usb_set_interface(udev, intf->altsetting[0].
+					desc.bInterfaceNumber, 0);
+			intf->needs_altsetting0 = 0;
+		}
 		goto done;
+	}
 
 	/* Don't resume if the interface is marked for rebinding */
 	if (intf->needs_binding)
@@ -1152,7 +1164,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	if (udev->actconfig) {
 		for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
 			intf = udev->actconfig->interface[i];
-			status = usb_suspend_interface(intf, msg);
+			status = usb_suspend_interface(udev, intf, msg);
 			if (status != 0)
 				break;
 		}
@@ -1164,7 +1176,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	if (status != 0) {
 		while (--i >= 0) {
 			intf = udev->actconfig->interface[i];
-			usb_resume_interface(intf, 0);
+			usb_resume_interface(udev, intf, 0);
 		}
 
 		/* Try another autosuspend when the interfaces aren't busy */
@@ -1277,7 +1289,7 @@ static int usb_resume_both(struct usb_device *udev)
 	if (status == 0 && udev->actconfig) {
 		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
 			intf = udev->actconfig->interface[i];
-			usb_resume_interface(intf, udev->reset_resume);
+			usb_resume_interface(udev, intf, udev->reset_resume);
 		}
 	}
 
@@ -1606,12 +1618,10 @@ int usb_external_resume_device(struct usb_device *udev)
 	return status;
 }
 
-static int usb_suspend(struct device *dev, pm_message_t message)
+int usb_suspend(struct device *dev, pm_message_t message)
 {
 	struct usb_device	*udev;
 
-	if (!is_usb_device(dev))	/* Ignore PM for interfaces */
-		return 0;
 	udev = to_usb_device(dev);
 
 	/* If udev is already suspended, we can skip this suspend and
@@ -1630,12 +1640,10 @@ static int usb_suspend(struct device *dev, pm_message_t message)
 	return usb_external_suspend_device(udev, message);
 }
 
-static int usb_resume(struct device *dev)
+int usb_resume(struct device *dev)
 {
 	struct usb_device	*udev;
 
-	if (!is_usb_device(dev))	/* Ignore PM for interfaces */
-		return 0;
 	udev = to_usb_device(dev);
 
 	/* If udev->skip_sys_resume is set then udev was already suspended
@@ -1647,17 +1655,10 @@ static int usb_resume(struct device *dev)
 	return usb_external_resume_device(udev);
 }
 
-#else
-
-#define usb_suspend	NULL
-#define usb_resume	NULL
-
 #endif /* CONFIG_PM */
 
 struct bus_type usb_bus_type = {
 	.name =		"usb",
 	.match =	usb_device_match,
 	.uevent =	usb_uevent,
-	.suspend =	usb_suspend,
-	.resume =	usb_resume,
 };
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index f7bfd72ef11..8abd4e59bf4 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -924,15 +924,6 @@ static int register_root_hub(struct usb_hcd *hcd)
 	return retval;
 }
 
-void usb_enable_root_hub_irq (struct usb_bus *bus)
-{
-	struct usb_hcd *hcd;
-
-	hcd = container_of (bus, struct usb_hcd, self);
-	if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
-		hcd->driver->hub_irq_enable (hcd);
-}
-
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 5b0b59b0d89..e710ce04e22 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -212,8 +212,6 @@ struct hc_driver {
 	int	(*bus_suspend)(struct usb_hcd *);
 	int	(*bus_resume)(struct usb_hcd *);
 	int	(*start_port_reset)(struct usb_hcd *, unsigned port_num);
-	void	(*hub_irq_enable)(struct usb_hcd *);
-		/* Needed only if port-change IRQs are level-triggered */
 
 		/* force handover of high-speed port to full-speed companion */
 	void	(*relinquish_port)(struct usb_hcd *, int);
@@ -379,8 +377,6 @@ extern struct list_head usb_bus_list;
 extern struct mutex usb_bus_list_lock;
 extern wait_queue_head_t usb_kill_urb_queue;
 
-extern void usb_enable_root_hub_irq(struct usb_bus *bus);
-
 extern int usb_find_interface_driver(struct usb_device *dev,
 	struct usb_interface *interface);
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 107e1d25dde..6a5cb018383 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2102,8 +2102,6 @@ int usb_port_resume(struct usb_device *udev)
 	}
 
 	clear_bit(port1, hub->busy_bits);
-	if (!hub->hdev->parent && !hub->busy_bits[0])
-		usb_enable_root_hub_irq(hub->hdev->bus);
 
 	status = check_port_resume_type(udev,
 			hub, port1, status, portchange, portstatus);
@@ -3081,11 +3079,6 @@ static void hub_events(void)
 			}
 		}
 
-		/* If this is a root hub, tell the HCD it's okay to
-		 * re-enable port-change interrupts now. */
-		if (!hdev->parent && !hub->busy_bits[0])
-			usb_enable_root_hub_irq(hdev->bus);
-
 loop_autopm:
 		/* Allow autosuspend if we're not going to run again */
 		if (list_empty(&hub->event_list))
@@ -3311,8 +3304,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 			break;
 	}
 	clear_bit(port1, parent_hub->busy_bits);
-	if (!parent_hdev->parent && !parent_hub->busy_bits[0])
-		usb_enable_root_hub_irq(parent_hdev->bus);
 
 	if (ret < 0)
 		goto re_enumerate;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 2fcc06eb5e6..286b4431a09 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -389,7 +389,6 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 	if (io->entries <= 0)
 		return io->entries;
 
-	io->count = io->entries;
 	io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
 	if (!io->urbs)
 		goto nomem;
@@ -458,6 +457,7 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 	io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
 
 	/* transaction state */
+	io->count = io->entries;
 	io->status = 0;
 	io->bytes = 0;
 	init_completion(&io->complete);
@@ -1091,8 +1091,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 				continue;
 			dev_dbg(&dev->dev, "unregistering interface %s\n",
 				dev_name(&interface->dev));
-			device_del(&interface->dev);
 			usb_remove_sysfs_intf_files(interface);
+			device_del(&interface->dev);
 		}
 
 		/* Now that the interfaces are unbound, nobody should
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c0b1ae25ae2..47111e88f79 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -601,15 +601,20 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
 void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
+	unsigned long flags;
 
-	spin_lock_irq(&anchor->lock);
+	spin_lock_irqsave(&anchor->lock, flags);
 	while (!list_empty(&anchor->urb_list)) {
 		victim = list_entry(anchor->urb_list.prev, struct urb,
 				    anchor_list);
+		usb_get_urb(victim);
+		spin_unlock_irqrestore(&anchor->lock, flags);
 		/* this will unanchor the URB */
 		usb_unlink_urb(victim);
+		usb_put_urb(victim);
+		spin_lock_irqsave(&anchor->lock, flags);
 	}
-	spin_unlock_irq(&anchor->lock);
+	spin_unlock_irqrestore(&anchor->lock, flags);
 }
 EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
 
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 84fcaa6a21e..be1fa0723f2 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -219,12 +219,6 @@ static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
 }
 #endif	/* CONFIG_HOTPLUG */
 
-struct device_type usb_device_type = {
-	.name =		"usb_device",
-	.release =	usb_release_dev,
-	.uevent =	usb_dev_uevent,
-};
-
 #ifdef	CONFIG_PM
 
 static int ksuspend_usb_init(void)
@@ -244,13 +238,80 @@ static void ksuspend_usb_cleanup(void)
 	destroy_workqueue(ksuspend_usb_wq);
 }
 
+/* USB device Power-Management thunks.
+ * There's no need to distinguish here between quiescing a USB device
+ * and powering it down; the generic_suspend() routine takes care of
+ * it by skipping the usb_port_suspend() call for a quiesce.  And for
+ * USB interfaces there's no difference at all.
+ */
+
+static int usb_dev_prepare(struct device *dev)
+{
+	return 0;		/* Implement eventually? */
+}
+
+static void usb_dev_complete(struct device *dev)
+{
+	/* Currently used only for rebinding interfaces */
+	usb_resume(dev);	/* Implement eventually? */
+}
+
+static int usb_dev_suspend(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_SUSPEND);
+}
+
+static int usb_dev_resume(struct device *dev)
+{
+	return usb_resume(dev);
+}
+
+static int usb_dev_freeze(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_FREEZE);
+}
+
+static int usb_dev_thaw(struct device *dev)
+{
+	return usb_resume(dev);
+}
+
+static int usb_dev_poweroff(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int usb_dev_restore(struct device *dev)
+{
+	return usb_resume(dev);
+}
+
+static struct pm_ops usb_device_pm_ops = {
+	.prepare =	usb_dev_prepare,
+	.complete =	usb_dev_complete,
+	.suspend =	usb_dev_suspend,
+	.resume =	usb_dev_resume,
+	.freeze =	usb_dev_freeze,
+	.thaw =		usb_dev_thaw,
+	.poweroff =	usb_dev_poweroff,
+	.restore =	usb_dev_restore,
+};
+
 #else
 
 #define ksuspend_usb_init()	0
 #define ksuspend_usb_cleanup()	do {} while (0)
+#define usb_device_pm_ops	(*(struct pm_ops *)0)
 
 #endif	/* CONFIG_PM */
 
+struct device_type usb_device_type = {
+	.name =		"usb_device",
+	.release =	usb_release_dev,
+	.uevent =	usb_dev_uevent,
+	.pm =		&usb_device_pm_ops,
+};
+
 
 /* Returns 1 if @usb_bus is WUSB, 0 otherwise */
 static unsigned usb_bus_is_wusb(struct usb_bus *bus)
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index d9a6e16dbf8..9a1a45ac3ad 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -41,6 +41,9 @@ extern void usb_host_cleanup(void);
 
 #ifdef	CONFIG_PM
 
+extern int usb_suspend(struct device *dev, pm_message_t msg);
+extern int usb_resume(struct device *dev);
+
 extern void usb_autosuspend_work(struct work_struct *work);
 extern int usb_port_suspend(struct usb_device *dev);
 extern int usb_port_resume(struct usb_device *dev);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index c6a8c6b1116..acc95b2ac6f 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -284,6 +284,16 @@ config USB_LH7A40X
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+# built in ../musb along with host support
+config USB_GADGET_MUSB_HDRC
+	boolean "Inventra HDRC USB Peripheral (TI, ...)"
+	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SELECTED
+	help
+	  This OTG-capable silicon IP is used in dual designs including
+	  the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010.
+
 config USB_GADGET_OMAP
 	boolean "OMAP USB Device Controller"
 	depends on ARCH_OMAP
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 1500e1b3c30..abf8192f89e 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -44,7 +44,6 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/sched.h>
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index e2d8a5d86c4..a8a1de41332 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -40,16 +40,15 @@
 #include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/mach-types.h>
 #include <asm/gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9261_matrix.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9261_matrix.h>
 
 #include "at91_udc.h"
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 07e5a0b5dcd..ae30ab1d264 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -22,7 +22,7 @@
 #include <linux/delay.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #include "atmel_usba_udc.h"
 
@@ -334,7 +334,7 @@ static void toggle_bias(int is_on)
 
 #elif defined(CONFIG_ARCH_AT91)
 
-#include <asm/arch/at91_pmc.h>
+#include <mach/at91_pmc.h>
 
 static void toggle_bias(int is_on)
 {
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 21d1406af9e..7600a0c7875 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -542,13 +542,14 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
 		req->req.context = dum;
 		req->req.complete = fifo_complete;
 
+		list_add_tail(&req->queue, &ep->queue);
 		spin_unlock (&dum->lock);
 		_req->actual = _req->length;
 		_req->status = 0;
 		_req->complete (_ep, _req);
 		spin_lock (&dum->lock);
-	}
-	list_add_tail (&req->queue, &ep->queue);
+	}  else
+		list_add_tail(&req->queue, &ep->queue);
 	spin_unlock_irqrestore (&dum->lock, flags);
 
 	/* real hardware would likely enable transfers here, in case
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index d8faccf2789..5ee1590b8e9 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -47,18 +47,37 @@ struct f_acm {
 	u8				ctrl_id, data_id;
 	u8				port_num;
 
-	struct usb_descriptor_header	**fs_function;
+	u8				pending;
+
+	/* lock is mostly for pending and notify_req ... they get accessed
+	 * by callbacks both from tty (open/close/break) under its spinlock,
+	 * and notify_req.complete() which can't use that lock.
+	 */
+	spinlock_t			lock;
+
 	struct acm_ep_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct acm_ep_descs		hs;
 
 	struct usb_ep			*notify;
 	struct usb_endpoint_descriptor	*notify_desc;
+	struct usb_request		*notify_req;
 
 	struct usb_cdc_line_coding	port_line_coding;	/* 8-N-1 etc */
+
+	/* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */
 	u16				port_handshake_bits;
-#define RS232_RTS	(1 << 1)	/* unused with full duplex */
-#define RS232_DTR	(1 << 0)	/* host is ready for data r/w */
+#define ACM_CTRL_RTS	(1 << 1)	/* unused with full duplex */
+#define ACM_CTRL_DTR	(1 << 0)	/* host is ready for data r/w */
+
+	/* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */
+	u16				serial_state;
+#define ACM_CTRL_OVERRUN	(1 << 6)
+#define ACM_CTRL_PARITY		(1 << 5)
+#define ACM_CTRL_FRAMING	(1 << 4)
+#define ACM_CTRL_RI		(1 << 3)
+#define ACM_CTRL_BRK		(1 << 2)
+#define ACM_CTRL_DSR		(1 << 1)
+#define ACM_CTRL_DCD		(1 << 0)
 };
 
 static inline struct f_acm *func_to_acm(struct usb_function *f)
@@ -66,12 +85,17 @@ static inline struct f_acm *func_to_acm(struct usb_function *f)
 	return container_of(f, struct f_acm, port.func);
 }
 
+static inline struct f_acm *port_to_acm(struct gserial *p)
+{
+	return container_of(p, struct f_acm, port);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* notification endpoint uses smallish and infrequent fixed-size messages */
 
 #define GS_LOG2_NOTIFY_INTERVAL		5	/* 1 << 5 == 32 msec */
-#define GS_NOTIFY_MAXPACKET		8
+#define GS_NOTIFY_MAXPACKET		10	/* notification + 2 bytes */
 
 /* interface and class descriptors: */
 
@@ -117,7 +141,7 @@ static struct usb_cdc_acm_descriptor acm_descriptor __initdata = {
 	.bLength =		sizeof(acm_descriptor),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
-	.bmCapabilities =	(1 << 1),
+	.bmCapabilities =	USB_CDC_CAP_LINE,
 };
 
 static struct usb_cdc_union_desc acm_union_desc __initdata = {
@@ -277,6 +301,11 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 
 	/* composite driver infrastructure handles everything except
 	 * CDC class messages; interface activation uses set_alt().
+	 *
+	 * Note CDC spec table 4 lists the ACM request profile.  It requires
+	 * encapsulated command support ... we don't handle any, and respond
+	 * to them by stalling.  Options include get/set/clear comm features
+	 * (not that useful) and SEND_BREAK.
 	 */
 	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
 
@@ -312,7 +341,7 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 		value = 0;
 
 		/* FIXME we should not allow data to flow until the
-		 * host sets the RS232_DTR bit; and when it clears
+		 * host sets the ACM_CTRL_DTR bit; and when it clears
 		 * that bit, we should return to that no-flow state.
 		 */
 		acm->port_handshake_bits = w_value;
@@ -350,9 +379,6 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	/* we know alt == 0, so this is an activation or a reset */
 
 	if (intf == acm->ctrl_id) {
-		/* REVISIT this may need more work when we start to
-		 * send notifications ...
-		 */
 		if (acm->notify->driver_data) {
 			VDBG(cdev, "reset acm control interface %d\n", intf);
 			usb_ep_disable(acm->notify);
@@ -397,6 +423,128 @@ static void acm_disable(struct usb_function *f)
 
 /*-------------------------------------------------------------------------*/
 
+/**
+ * acm_cdc_notify - issue CDC notification to host
+ * @acm: wraps host to be notified
+ * @type: notification type
+ * @value: Refer to cdc specs, wValue field.
+ * @data: data to be sent
+ * @length: size of data
+ * Context: irqs blocked, acm->lock held, acm_notify_req non-null
+ *
+ * Returns zero on sucess or a negative errno.
+ *
+ * See section 6.3.5 of the CDC 1.1 specification for information
+ * about the only notification we issue:  SerialState change.
+ */
+static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
+		void *data, unsigned length)
+{
+	struct usb_ep			*ep = acm->notify;
+	struct usb_request		*req;
+	struct usb_cdc_notification	*notify;
+	const unsigned			len = sizeof(*notify) + length;
+	void				*buf;
+	int				status;
+
+	req = acm->notify_req;
+	acm->notify_req = NULL;
+	acm->pending = false;
+
+	req->length = len;
+	notify = req->buf;
+	buf = notify + 1;
+
+	notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS
+			| USB_RECIP_INTERFACE;
+	notify->bNotificationType = type;
+	notify->wValue = cpu_to_le16(value);
+	notify->wIndex = cpu_to_le16(acm->ctrl_id);
+	notify->wLength = cpu_to_le16(length);
+	memcpy(buf, data, length);
+
+	status = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (status < 0) {
+		ERROR(acm->port.func.config->cdev,
+				"acm ttyGS%d can't notify serial state, %d\n",
+				acm->port_num, status);
+		acm->notify_req = req;
+	}
+
+	return status;
+}
+
+static int acm_notify_serial_state(struct f_acm *acm)
+{
+	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
+	int			status;
+
+	spin_lock(&acm->lock);
+	if (acm->notify_req) {
+		DBG(cdev, "acm ttyGS%d serial state %04x\n",
+				acm->port_num, acm->serial_state);
+		status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
+				0, &acm->serial_state, sizeof(acm->serial_state));
+	} else {
+		acm->pending = true;
+		status = 0;
+	}
+	spin_unlock(&acm->lock);
+	return status;
+}
+
+static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_acm		*acm = req->context;
+	u8			doit = false;
+
+	/* on this call path we do NOT hold the port spinlock,
+	 * which is why ACM needs its own spinlock
+	 */
+	spin_lock(&acm->lock);
+	if (req->status != -ESHUTDOWN)
+		doit = acm->pending;
+	acm->notify_req = req;
+	spin_unlock(&acm->lock);
+
+	if (doit)
+		acm_notify_serial_state(acm);
+}
+
+/* connect == the TTY link is open */
+
+static void acm_connect(struct gserial *port)
+{
+	struct f_acm		*acm = port_to_acm(port);
+
+	acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD;
+	acm_notify_serial_state(acm);
+}
+
+static void acm_disconnect(struct gserial *port)
+{
+	struct f_acm		*acm = port_to_acm(port);
+
+	acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD);
+	acm_notify_serial_state(acm);
+}
+
+static int acm_send_break(struct gserial *port, int duration)
+{
+	struct f_acm		*acm = port_to_acm(port);
+	u16			state;
+
+	state = acm->serial_state;
+	state &= ~ACM_CTRL_BRK;
+	if (duration)
+		state |= ACM_CTRL_BRK;
+
+	acm->serial_state = state;
+	return acm_notify_serial_state(acm);
+}
+
+/*-------------------------------------------------------------------------*/
+
 /* ACM function driver setup/binding */
 static int __init
 acm_bind(struct usb_configuration *c, struct usb_function *f)
@@ -445,8 +593,20 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 	acm->notify = ep;
 	ep->driver_data = cdev;	/* claim */
 
+	/* allocate notification */
+	acm->notify_req = gs_alloc_req(ep,
+			sizeof(struct usb_cdc_notification) + 2,
+			GFP_KERNEL);
+	if (!acm->notify_req)
+		goto fail;
+
+	acm->notify_req->complete = acm_cdc_notify_complete;
+	acm->notify_req->context = acm;
+
 	/* copy descriptors, and track endpoint copies */
 	f->descriptors = usb_copy_descriptors(acm_fs_function);
+	if (!f->descriptors)
+		goto fail;
 
 	acm->fs.in = usb_find_endpoint(acm_fs_function,
 			f->descriptors, &acm_fs_in_desc);
@@ -478,8 +638,6 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 				f->hs_descriptors, &acm_hs_notify_desc);
 	}
 
-	/* FIXME provide a callback for triggering notifications */
-
 	DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
 			acm->port_num,
 			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
@@ -488,6 +646,9 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 	return 0;
 
 fail:
+	if (acm->notify_req)
+		gs_free_req(acm->notify, acm->notify_req);
+
 	/* we might as well release our claims on endpoints */
 	if (acm->notify)
 		acm->notify->driver_data = NULL;
@@ -504,10 +665,13 @@ fail:
 static void
 acm_unbind(struct usb_configuration *c, struct usb_function *f)
 {
+	struct f_acm		*acm = func_to_acm(f);
+
 	if (gadget_is_dualspeed(c->cdev->gadget))
 		usb_free_descriptors(f->hs_descriptors);
 	usb_free_descriptors(f->descriptors);
-	kfree(func_to_acm(f));
+	gs_free_req(acm->notify, acm->notify_req);
+	kfree(acm);
 }
 
 /* Some controllers can't support CDC ACM ... */
@@ -571,8 +735,14 @@ int __init acm_bind_config(struct usb_configuration *c, u8 port_num)
 	if (!acm)
 		return -ENOMEM;
 
+	spin_lock_init(&acm->lock);
+
 	acm->port_num = port_num;
 
+	acm->port.connect = acm_connect;
+	acm->port.disconnect = acm_disconnect;
+	acm->port.send_break = acm_send_break;
+
 	acm->port.func.name = "acm";
 	acm->port.func.strings = acm_strings;
 	/* descriptors are per-instance copies */
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 0822e9d7693..a2b5c092bda 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -63,9 +63,7 @@ struct f_ecm {
 
 	char				ethaddr[14];
 
-	struct usb_descriptor_header	**fs_function;
 	struct ecm_ep_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct ecm_ep_descs		hs;
 
 	struct usb_ep			*notify;
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 61652f0f13f..659b3d9671c 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -85,9 +85,7 @@ struct f_rndis {
 	u8				ethaddr[ETH_ALEN];
 	int				config;
 
-	struct usb_descriptor_header	**fs_function;
 	struct rndis_ep_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct rndis_ep_descs		hs;
 
 	struct usb_ep			*notify;
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 1b6bde9aaed..fe5674db344 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -36,9 +36,7 @@ struct f_gser {
 	u8				data_id;
 	u8				port_num;
 
-	struct usb_descriptor_header	**fs_function;
 	struct gser_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct gser_descs		hs;
 };
 
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index afeab9a0523..acb8d233aa1 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -66,9 +66,7 @@ struct f_gether {
 
 	char				ethaddr[14];
 
-	struct usb_descriptor_header	**fs_function;
 	struct geth_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct geth_descs		hs;
 };
 
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 5246e8fef2b..17d9905101b 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -11,6 +11,10 @@
  * Some are available on 2.4 kernels; several are available, but not
  * yet pushed in the 2.6 mainline tree.
  */
+
+#ifndef __GADGET_CHIPS_H
+#define __GADGET_CHIPS_H
+
 #ifdef CONFIG_USB_GADGET_NET2280
 #define	gadget_is_net2280(g)	!strcmp("net2280", (g)->name)
 #else
@@ -237,3 +241,5 @@ static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
 	/* Everything else is *presumably* fine ... */
 	return true;
 }
+
+#endif /* __GADGET_CHIPS_H */
diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h
index 1ecfd6366b9..ca861203a30 100644
--- a/drivers/usb/gadget/lh7a40x_udc.h
+++ b/drivers/usb/gadget/lh7a40x_udc.h
@@ -47,7 +47,7 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 8da7535c0c7..77b44fb48f0 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1593,7 +1593,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 
 	m66592->gadget.ops = &m66592_gadget_ops;
 	device_initialize(&m66592->gadget.dev);
-	dev_set_name(&m66592->gadget, "gadget");
+	dev_set_name(&m66592->gadget.dev, "gadget");
 	m66592->gadget.is_dualspeed = 1;
 	m66592->gadget.dev.parent = &pdev->dev;
 	m66592->gadget.dev.dma_mask = pdev->dev.dma_mask;
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 395bd184448..574c53831a0 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -52,8 +52,9 @@
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/usb.h>
+#include <mach/dma.h>
+#include <mach/usb.h>
+#include <mach/control.h>
 
 #include "omap_udc.h"
 
@@ -2310,10 +2311,10 @@ static int proc_otg_show(struct seq_file *s)
 	u32		trans;
 	char		*ctrl_name;
 
-	tmp = OTG_REV_REG;
+	tmp = omap_readl(OTG_REV);
 	if (cpu_is_omap24xx()) {
 		ctrl_name = "control_devconf";
-		trans = CONTROL_DEVCONF_REG;
+		trans = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 	} else {
 		ctrl_name = "tranceiver_ctrl";
 		trans = omap_readw(USB_TRANSCEIVER_CTRL);
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 7e6725d8997..da6e93c201d 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -61,7 +61,7 @@
  * This driver is PXA25x only.  Grab the right register definitions.
  */
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa25x-udc.h>
+#include <mach/pxa25x-udc.h>
 #endif
 
 #include <asm/mach/udc_pxa2xx.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index c8a13215e02..1d51aa21e6e 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -139,7 +139,7 @@ struct pxa25x_udc {
 /*-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_ARCH_LUBBOCK
-#include <asm/arch/lubbock.h>
+#include <mach/lubbock.h>
 /* lubbock can also report usb connect/disconnect irqs */
 #endif
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 9d447d8cfc0..7cbc78a6853 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -33,13 +33,13 @@
 #include <linux/irq.h>
 
 #include <asm/byteorder.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <linux/usb.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
-#include <asm/arch/udc.h>
+#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
+#include <mach/udc.h>
 
 #include "pxa27x_udc.h"
 
@@ -1622,7 +1622,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	struct pxa_udc *udc = the_controller;
 	int retval;
 
-	if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind
+	if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind
 			|| !driver->disconnect || !driver->setup)
 		return -EINVAL;
 	if (!udc)
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 6b1ef488043..29d13ebe750 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -35,7 +35,6 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/version.h>
 #include <linux/clk.h>
 
 #include <linux/debugfs.h>
@@ -49,15 +48,14 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/regs-udc.h>
 #include <asm/plat-s3c24xx/udc.h>
 
-#include <asm/mach-types.h>
 
 #include "s3c2410_udc.h"
 
@@ -888,7 +886,7 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 	}
 }
 
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 
 /*
  *	s3c2410_udc_irq - interrupt handler
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index abf9505d3a7..53d59287f2b 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -52,13 +52,16 @@
  * is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
  */
 
+#define PREFIX	"ttyGS"
+
 /*
  * gserial is the lifecycle interface, used by USB functions
  * gs_port is the I/O nexus, used by the tty driver
  * tty_struct links to the tty/filesystem framework
  *
  * gserial <---> gs_port ... links will be null when the USB link is
- * inactive; managed by gserial_{connect,disconnect}().
+ * inactive; managed by gserial_{connect,disconnect}().  each gserial
+ * instance can wrap its own USB control protocol.
  *	gserial->ioport == usb_ep->driver_data ... gs_port
  *	gs_port->port_usb ... gserial
  *
@@ -100,6 +103,8 @@ struct gs_port {
 	wait_queue_head_t	close_wait;	/* wait for last close */
 
 	struct list_head	read_pool;
+	struct list_head	read_queue;
+	unsigned		n_read;
 	struct tasklet_struct	push;
 
 	struct list_head	write_pool;
@@ -177,7 +182,7 @@ static void gs_buf_clear(struct gs_buf *gb)
 /*
  * gs_buf_data_avail
  *
- * Return the number of bytes of data available in the circular
+ * Return the number of bytes of data written into the circular
  * buffer.
  */
 static unsigned gs_buf_data_avail(struct gs_buf *gb)
@@ -278,7 +283,7 @@ gs_buf_get(struct gs_buf *gb, char *buf, unsigned count)
  * Allocate a usb_request and its buffer.  Returns a pointer to the
  * usb_request or NULL if there is an error.
  */
-static struct usb_request *
+struct usb_request *
 gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
 {
 	struct usb_request *req;
@@ -302,7 +307,7 @@ gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
  *
  * Free a usb_request and its buffer.
  */
-static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
+void gs_free_req(struct usb_ep *ep, struct usb_request *req)
 {
 	kfree(req->buf);
 	usb_ep_free_request(ep, req);
@@ -367,11 +372,9 @@ __acquires(&port->port_lock)
 		req->length = len;
 		list_del(&req->list);
 
-#ifdef VERBOSE_DEBUG
-		pr_debug("%s: %s, len=%d, 0x%02x 0x%02x 0x%02x ...\n",
-				__func__, in->name, len, *((u8 *)req->buf),
+		pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
+				port->port_num, len, *((u8 *)req->buf),
 				*((u8 *)req->buf+1), *((u8 *)req->buf+2));
-#endif
 
 		/* Drop lock while we call out of driver; completions
 		 * could be issued while we do so.  Disconnection may
@@ -401,56 +404,6 @@ __acquires(&port->port_lock)
 	return status;
 }
 
-static void gs_rx_push(unsigned long _port)
-{
-	struct gs_port		*port = (void *)_port;
-	struct tty_struct	*tty = port->port_tty;
-
-	/* With low_latency, tty_flip_buffer_push() doesn't put its
-	 * real work through a workqueue, so the ldisc has a better
-	 * chance to keep up with peak USB data rates.
-	 */
-	if (tty) {
-		tty_flip_buffer_push(tty);
-		wake_up_interruptible(&tty->read_wait);
-	}
-}
-
-/*
- * gs_recv_packet
- *
- * Called for each USB packet received.  Reads the packet
- * header and stuffs the data in the appropriate tty buffer.
- * Returns 0 if successful, or a negative error number.
- *
- * Called during USB completion routine, on interrupt time.
- * With port_lock.
- */
-static int gs_recv_packet(struct gs_port *port, char *packet, unsigned size)
-{
-	unsigned		len;
-	struct tty_struct	*tty;
-
-	/* I/O completions can continue for a while after close(), until the
-	 * request queue empties.  Just discard any data we receive, until
-	 * something reopens this TTY ... as if there were no HW flow control.
-	 */
-	tty = port->port_tty;
-	if (tty == NULL) {
-		pr_vdebug("%s: ttyGS%d, after close\n",
-				__func__, port->port_num);
-		return -EIO;
-	}
-
-	len = tty_insert_flip_string(tty, packet, size);
-	if (len > 0)
-		tasklet_schedule(&port->push);
-	if (len < size)
-		pr_debug("%s: ttyGS%d, drop %d bytes\n",
-				__func__, port->port_num, size - len);
-	return 0;
-}
-
 /*
  * Context: caller owns port_lock, and port_usb is set
  */
@@ -469,9 +422,9 @@ __acquires(&port->port_lock)
 		int			status;
 		struct tty_struct	*tty;
 
-		/* no more rx if closed or throttled */
+		/* no more rx if closed */
 		tty = port->port_tty;
-		if (!tty || test_bit(TTY_THROTTLED, &tty->flags))
+		if (!tty)
 			break;
 
 		req = list_entry(pool->next, struct usb_request, list);
@@ -500,36 +453,134 @@ __acquires(&port->port_lock)
 	return started;
 }
 
-static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+/*
+ * RX tasklet takes data out of the RX queue and hands it up to the TTY
+ * layer until it refuses to take any more data (or is throttled back).
+ * Then it issues reads for any further data.
+ *
+ * If the RX queue becomes full enough that no usb_request is queued,
+ * the OUT endpoint may begin NAKing as soon as its FIFO fills up.
+ * So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
+ * can be buffered before the TTY layer's buffers (currently 64 KB).
+ */
+static void gs_rx_push(unsigned long _port)
 {
-	int		status;
-	struct gs_port	*port = ep->driver_data;
+	struct gs_port		*port = (void *)_port;
+	struct tty_struct	*tty;
+	struct list_head	*queue = &port->read_queue;
+	bool			disconnect = false;
+	bool			do_push = false;
 
-	spin_lock(&port->port_lock);
-	list_add(&req->list, &port->read_pool);
+	/* hand any queued data to the tty */
+	spin_lock_irq(&port->port_lock);
+	tty = port->port_tty;
+	while (!list_empty(queue)) {
+		struct usb_request	*req;
 
-	switch (req->status) {
-	case 0:
-		/* normal completion */
-		status = gs_recv_packet(port, req->buf, req->actual);
-		if (status && status != -EIO)
-			pr_debug("%s: %s %s err %d\n",
-				__func__, "recv", ep->name, status);
-		gs_start_rx(port);
-		break;
+		req = list_first_entry(queue, struct usb_request, list);
 
-	case -ESHUTDOWN:
-		/* disconnect */
-		pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
-		break;
+		/* discard data if tty was closed */
+		if (!tty)
+			goto recycle;
 
-	default:
-		/* presumably a transient fault */
-		pr_warning("%s: unexpected %s status %d\n",
-				__func__, ep->name, req->status);
-		gs_start_rx(port);
-		break;
+		/* leave data queued if tty was rx throttled */
+		if (test_bit(TTY_THROTTLED, &tty->flags))
+			break;
+
+		switch (req->status) {
+		case -ESHUTDOWN:
+			disconnect = true;
+			pr_vdebug(PREFIX "%d: shutdown\n", port->port_num);
+			break;
+
+		default:
+			/* presumably a transient fault */
+			pr_warning(PREFIX "%d: unexpected RX status %d\n",
+					port->port_num, req->status);
+			/* FALLTHROUGH */
+		case 0:
+			/* normal completion */
+			break;
+		}
+
+		/* push data to (open) tty */
+		if (req->actual) {
+			char		*packet = req->buf;
+			unsigned	size = req->actual;
+			unsigned	n;
+			int		count;
+
+			/* we may have pushed part of this packet already... */
+			n = port->n_read;
+			if (n) {
+				packet += n;
+				size -= n;
+			}
+
+			count = tty_insert_flip_string(tty, packet, size);
+			if (count)
+				do_push = true;
+			if (count != size) {
+				/* stop pushing; TTY layer can't handle more */
+				port->n_read += count;
+				pr_vdebug(PREFIX "%d: rx block %d/%d\n",
+						port->port_num,
+						count, req->actual);
+				break;
+			}
+			port->n_read = 0;
+		}
+recycle:
+		list_move(&req->list, &port->read_pool);
 	}
+
+	/* Push from tty to ldisc; this is immediate with low_latency, and
+	 * may trigger callbacks to this driver ... so drop the spinlock.
+	 */
+	if (tty && do_push) {
+		spin_unlock_irq(&port->port_lock);
+		tty_flip_buffer_push(tty);
+		wake_up_interruptible(&tty->read_wait);
+		spin_lock_irq(&port->port_lock);
+
+		/* tty may have been closed */
+		tty = port->port_tty;
+	}
+
+
+	/* We want our data queue to become empty ASAP, keeping data
+	 * in the tty and ldisc (not here).  If we couldn't push any
+	 * this time around, there may be trouble unless there's an
+	 * implicit tty_unthrottle() call on its way...
+	 *
+	 * REVISIT we should probably add a timer to keep the tasklet
+	 * from starving ... but it's not clear that case ever happens.
+	 */
+	if (!list_empty(queue) && tty) {
+		if (!test_bit(TTY_THROTTLED, &tty->flags)) {
+			if (do_push)
+				tasklet_schedule(&port->push);
+			else
+				pr_warning(PREFIX "%d: RX not scheduled?\n",
+					port->port_num);
+		}
+	}
+
+	/* If we're still connected, refill the USB RX queue. */
+	if (!disconnect && port->port_usb)
+		gs_start_rx(port);
+
+	spin_unlock_irq(&port->port_lock);
+}
+
+static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct gs_port	*port = ep->driver_data;
+
+	/* Queue all received data until the tty layer is ready for it. */
+	spin_lock(&port->port_lock);
+	list_add_tail(&req->list, &port->read_queue);
+	tasklet_schedule(&port->push);
 	spin_unlock(&port->port_lock);
 }
 
@@ -625,6 +676,7 @@ static int gs_start_io(struct gs_port *port)
 	}
 
 	/* queue read requests */
+	port->n_read = 0;
 	started = gs_start_rx(port);
 
 	/* unblock any pending writes into our circular buffer */
@@ -633,9 +685,10 @@ static int gs_start_io(struct gs_port *port)
 	} else {
 		gs_free_requests(ep, head);
 		gs_free_requests(port->port_usb->in, &port->write_pool);
+		status = -EIO;
 	}
 
-	return started ? 0 : status;
+	return status;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -736,10 +789,13 @@ static int gs_open(struct tty_struct *tty, struct file *file)
 
 	/* if connected, start the I/O stream */
 	if (port->port_usb) {
+		struct gserial	*gser = port->port_usb;
+
 		pr_debug("gs_open: start ttyGS%d\n", port->port_num);
 		gs_start_io(port);
 
-		/* REVISIT for ACM, issue "network connected" event */
+		if (gser->connect)
+			gser->connect(gser);
 	}
 
 	pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
@@ -766,6 +822,7 @@ static int gs_writes_finished(struct gs_port *p)
 static void gs_close(struct tty_struct *tty, struct file *file)
 {
 	struct gs_port *port = tty->driver_data;
+	struct gserial	*gser;
 
 	spin_lock_irq(&port->port_lock);
 
@@ -785,32 +842,31 @@ static void gs_close(struct tty_struct *tty, struct file *file)
 	port->openclose = true;
 	port->open_count = 0;
 
-	if (port->port_usb)
-		/* REVISIT for ACM, issue "network disconnected" event */;
+	gser = port->port_usb;
+	if (gser && gser->disconnect)
+		gser->disconnect(gser);
 
 	/* wait for circular write buffer to drain, disconnect, or at
 	 * most GS_CLOSE_TIMEOUT seconds; then discard the rest
 	 */
-	if (gs_buf_data_avail(&port->port_write_buf) > 0
-			&& port->port_usb) {
+	if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
 		spin_unlock_irq(&port->port_lock);
 		wait_event_interruptible_timeout(port->drain_wait,
 					gs_writes_finished(port),
 					GS_CLOSE_TIMEOUT * HZ);
 		spin_lock_irq(&port->port_lock);
+		gser = port->port_usb;
 	}
 
 	/* Iff we're disconnected, there can be no I/O in flight so it's
 	 * ok to free the circular buffer; else just scrub it.  And don't
 	 * let the push tasklet fire again until we're re-opened.
 	 */
-	if (port->port_usb == NULL)
+	if (gser == NULL)
 		gs_buf_free(&port->port_write_buf);
 	else
 		gs_buf_clear(&port->port_write_buf);
 
-	tasklet_kill(&port->push);
-
 	tty->driver_data = NULL;
 	port->port_tty = NULL;
 
@@ -911,15 +967,35 @@ static void gs_unthrottle(struct tty_struct *tty)
 {
 	struct gs_port		*port = tty->driver_data;
 	unsigned long		flags;
-	unsigned		started = 0;
 
 	spin_lock_irqsave(&port->port_lock, flags);
-	if (port->port_usb)
-		started = gs_start_rx(port);
+	if (port->port_usb) {
+		/* Kickstart read queue processing.  We don't do xon/xoff,
+		 * rts/cts, or other handshaking with the host, but if the
+		 * read queue backs up enough we'll be NAKing OUT packets.
+		 */
+		tasklet_schedule(&port->push);
+		pr_vdebug(PREFIX "%d: unthrottle\n", port->port_num);
+	}
 	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static int gs_break_ctl(struct tty_struct *tty, int duration)
+{
+	struct gs_port	*port = tty->driver_data;
+	int		status = 0;
+	struct gserial	*gser;
+
+	pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n",
+			port->port_num, duration);
 
-	pr_vdebug("gs_unthrottle: ttyGS%d, %d packets\n",
-			port->port_num, started);
+	spin_lock_irq(&port->port_lock);
+	gser = port->port_usb;
+	if (gser && gser->send_break)
+		status = gser->send_break(gser, duration);
+	spin_unlock_irq(&port->port_lock);
+
+	return status;
 }
 
 static const struct tty_operations gs_tty_ops = {
@@ -931,6 +1007,7 @@ static const struct tty_operations gs_tty_ops = {
 	.write_room =		gs_write_room,
 	.chars_in_buffer =	gs_chars_in_buffer,
 	.unthrottle =		gs_unthrottle,
+	.break_ctl =		gs_break_ctl,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -953,6 +1030,7 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
 	tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
 
 	INIT_LIST_HEAD(&port->read_pool);
+	INIT_LIST_HEAD(&port->read_queue);
 	INIT_LIST_HEAD(&port->write_pool);
 
 	port->port_num = port_num;
@@ -997,7 +1075,7 @@ int __init gserial_setup(struct usb_gadget *g, unsigned count)
 
 	gs_tty_driver->owner = THIS_MODULE;
 	gs_tty_driver->driver_name = "g_serial";
-	gs_tty_driver->name = "ttyGS";
+	gs_tty_driver->name = PREFIX;
 	/* uses dynamically assigned dev_t values */
 
 	gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
@@ -1104,6 +1182,8 @@ void gserial_cleanup(void)
 		ports[i].port = NULL;
 		mutex_unlock(&ports[i].lock);
 
+		tasklet_kill(&port->push);
+
 		/* wait for old opens to finish */
 		wait_event(port->close_wait, gs_closed(port));
 
@@ -1175,14 +1255,17 @@ int gserial_connect(struct gserial *gser, u8 port_num)
 
 	/* REVISIT if waiting on "carrier detect", signal. */
 
-	/* REVISIT for ACM, issue "network connection" status notification:
-	 * connected if open_count, else disconnected.
+	/* if it's already open, start I/O ... and notify the serial
+	 * protocol about open/close status (connect/disconnect).
 	 */
-
-	/* if it's already open, start I/O */
 	if (port->open_count) {
 		pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
 		gs_start_io(port);
+		if (gser->connect)
+			gser->connect(gser);
+	} else {
+		if (gser->disconnect)
+			gser->disconnect(gser);
 	}
 
 	spin_unlock_irqrestore(&port->port_lock, flags);
@@ -1241,6 +1324,7 @@ void gserial_disconnect(struct gserial *gser)
 	if (port->open_count == 0 && !port->openclose)
 		gs_buf_free(&port->port_write_buf);
 	gs_free_requests(gser->out, &port->read_pool);
+	gs_free_requests(gser->out, &port->read_queue);
 	gs_free_requests(gser->in, &port->write_pool);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 }
diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h
index 7b561138f90..af3910d01ae 100644
--- a/drivers/usb/gadget/u_serial.h
+++ b/drivers/usb/gadget/u_serial.h
@@ -23,8 +23,7 @@
  * style I/O using the USB peripheral endpoints listed here, including
  * hookups to sysfs and /dev for each logical "tty" device.
  *
- * REVISIT need TTY --> USB event flow too, so ACM can report open/close
- * as carrier detect events.  Model after ECM.  There's more ACM state too.
+ * REVISIT at least ACM could support tiocmget() if needed.
  *
  * REVISIT someday, allow multiplexing several TTYs over these endpoints.
  */
@@ -41,8 +40,17 @@ struct gserial {
 
 	/* REVISIT avoid this CDC-ACM support harder ... */
 	struct usb_cdc_line_coding port_line_coding;	/* 9600-8-N-1 etc */
+
+	/* notification callbacks */
+	void (*connect)(struct gserial *p);
+	void (*disconnect)(struct gserial *p);
+	int (*send_break)(struct gserial *p, int duration);
 };
 
+/* utilities to allocate/free request and buffer */
+struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags);
+void gs_free_req(struct usb_ep *, struct usb_request *req);
+
 /* port setup/teardown is handled by gadget driver */
 int gserial_setup(struct usb_gadget *g, unsigned n_ports);
 void gserial_cleanup(void);
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 5fbdc14e63b..5416cf96900 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mbus.h>
-#include <asm/plat-orion/ehci-orion.h>
+#include <plat/ehci-orion.h>
 
 #define rdl(off)	__raw_readl(hcd->regs + (off))
 #define wrl(off, val)	__raw_writel((val), hcd->regs + (off))
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 2622b6596d7..3712b925b31 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -932,7 +932,7 @@ static struct ehci_qh *qh_append_tds (
 
 			list_del (&qtd->qtd_list);
 			list_add (&dummy->qtd_list, qtd_list);
-			__list_splice (qtd_list, qh->qtd_list.prev);
+			list_splice_tail(qtd_list, &qh->qtd_list);
 
 			ehci_qtd_init(ehci, qtd, qtd->qtd_dma);
 			qh->dummy = qtd;
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index c858f2adb92..8017f1cf78e 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -126,9 +126,8 @@ static void isp1760_writel(const unsigned int val, __u32 __iomem *regs)
  * doesn't quite work because some people have to enforce 32-bit access
  */
 static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
-		__u32 __iomem *dst, u32 offset, u32 len)
+		__u32 __iomem *dst, u32 len)
 {
-	struct usb_hcd *hcd = priv_to_hcd(priv);
 	u32 val;
 	u8 *buff8;
 
@@ -136,11 +135,6 @@ static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
 		printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len);
 		return;
 	}
-	isp1760_writel(offset,  hcd->regs + HC_MEMORY_REG);
-	/* XXX
-	 * 90nsec delay, the spec says something how this could be avoided.
-	 */
-	mdelay(1);
 
 	while (len >= 4) {
 		*src = __raw_readl(dst);
@@ -987,8 +981,20 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 			printk(KERN_ERR "qh is 0\n");
 			continue;
 		}
-		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs,
-				atl_regs, sizeof(ptd));
+		isp1760_writel(atl_regs + ISP_BANK(0), usb_hcd->regs +
+				HC_MEMORY_REG);
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+		/*
+		 * write bank1 address twice to ensure the 90ns delay (time
+		 * between BANK0 write and the priv_read_copy() call is at
+		 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 109ns)
+		 */
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+
+		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs +
+				ISP_BANK(0), sizeof(ptd));
 
 		dw1 = le32_to_cpu(ptd.dw1);
 		dw2 = le32_to_cpu(ptd.dw2);
@@ -1091,7 +1097,7 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 			case IN_PID:
 				priv_read_copy(priv,
 					priv->atl_ints[queue_entry].data_buffer,
-					usb_hcd->regs + payload, payload,
+					usb_hcd->regs + payload + ISP_BANK(1),
 					length);
 
 			case OUT_PID:
@@ -1122,11 +1128,11 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 		} else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) {
 			/* short BULK received */
 
-			printk(KERN_ERR "short bulk, %d instead %zu\n", length,
-					qtd->length);
 			if (urb->transfer_flags & URB_SHORT_NOT_OK) {
 				urb->status = -EREMOTEIO;
-				printk(KERN_ERR "not okey\n");
+				isp1760_dbg(priv, "short bulk, %d instead %zu "
+					"with URB_SHORT_NOT_OK flag.\n",
+					length, qtd->length);
 			}
 
 			if (urb->status == -EINPROGRESS)
@@ -1206,8 +1212,20 @@ static void do_intl_int(struct usb_hcd *usb_hcd)
 			continue;
 		}
 
-		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs,
-				int_regs, sizeof(ptd));
+		isp1760_writel(int_regs + ISP_BANK(0), usb_hcd->regs +
+				HC_MEMORY_REG);
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+		/*
+		 * write bank1 address twice to ensure the 90ns delay (time
+		 * between BANK0 write and the priv_read_copy() call is at
+		 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
+		 */
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+
+		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs +
+				ISP_BANK(0), sizeof(ptd));
 		dw1 = le32_to_cpu(ptd.dw1);
 		dw3 = le32_to_cpu(ptd.dw3);
 		check_int_err_status(le32_to_cpu(ptd.dw4));
@@ -1242,7 +1260,7 @@ static void do_intl_int(struct usb_hcd *usb_hcd)
 			case IN_PID:
 				priv_read_copy(priv,
 					priv->int_ints[queue_entry].data_buffer,
-					usb_hcd->regs + payload , payload,
+					usb_hcd->regs + payload + ISP_BANK(1),
 					length);
 			case OUT_PID:
 
@@ -1615,8 +1633,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		return -EPIPE;
 	}
 
-	isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
-	return 0;
+	return isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
 }
 
 static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index 6473dd86993..4377277667d 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -54,6 +54,8 @@ void deinit_kmem_cache(void);
 #define BUFFER_MAP		0x7
 
 #define HC_MEMORY_REG		0x33c
+#define ISP_BANK(x)		((x) << 16)
+
 #define HC_PORT1_CTRL		0x374
 #define PORT1_POWER		(3 << 3)
 #define PORT1_INIT1		(1 << 7)
@@ -119,6 +121,9 @@ struct inter_packet_info {
 typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
 		struct isp1760_qtd *qtd);
 
+#define isp1760_dbg(priv, fmt, args...) \
+	dev_dbg(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
 #define isp1760_info(priv, fmt, args...) \
 	dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args)
 
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index a5d8e550d89..4ed228a8994 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -15,12 +15,11 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #ifndef CONFIG_ARCH_AT91
 #error "CONFIG_ARCH_AT91 must be defined."
@@ -261,7 +260,6 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index c0948008fe3..2ac4e022a13 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -163,7 +163,6 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 5adaf36e47d..fb3055f084b 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -28,8 +28,7 @@
 #include <linux/signal.h>
 #include <linux/platform_device.h>
 
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static struct clk *usb_host_clock;
 
@@ -135,7 +134,6 @@ static struct hc_driver ohci_ep93xx_hc_driver = {
 	.get_frame_number	= ohci_get_frame,
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
-	.hub_irq_enable		= ohci_rhsc_enable,
 #ifdef CONFIG_PM
 	.bus_suspend		= ohci_bus_suspend,
 	.bus_resume		= ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 26bc47941d0..89901962cbf 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -86,6 +86,21 @@ static void ohci_stop (struct usb_hcd *hcd);
 static int ohci_restart (struct ohci_hcd *ohci);
 #endif
 
+#ifdef CONFIG_PCI
+static void quirk_amd_pll(int state);
+static void amd_iso_dev_put(void);
+#else
+static inline void quirk_amd_pll(int state)
+{
+	return;
+}
+static inline void amd_iso_dev_put(void)
+{
+	return;
+}
+#endif
+
+
 #include "ohci-hub.c"
 #include "ohci-dbg.c"
 #include "ohci-mem.c"
@@ -483,6 +498,9 @@ static int ohci_init (struct ohci_hcd *ohci)
 	int ret;
 	struct usb_hcd *hcd = ohci_to_hcd(ohci);
 
+	if (distrust_firmware)
+		ohci->flags |= OHCI_QUIRK_HUB_POWER;
+
 	disable (ohci);
 	ohci->regs = hcd->regs;
 
@@ -689,7 +707,8 @@ retry:
 		temp |= RH_A_NOCP;
 		temp &= ~(RH_A_POTPGT | RH_A_NPS);
 		ohci_writel (ohci, temp, &ohci->regs->roothub.a);
-	} else if ((ohci->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
+	} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
+			(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
 		/* hub power always on; required for AMD-756 and some
 		 * Mac platforms.  ganged overcurrent reporting, if any.
 		 */
@@ -882,6 +901,8 @@ static void ohci_stop (struct usb_hcd *hcd)
 
 	if (quirk_zfmicro(ohci))
 		del_timer(&ohci->unlink_watchdog);
+	if (quirk_amdiso(ohci))
+		amd_iso_dev_put();
 
 	remove_debug_files (ohci);
 	ohci_mem_cleanup (ohci);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index b56739221d1..7ea9a7b3115 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,18 +36,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-/* hcd->hub_irq_enable() */
-static void ohci_rhsc_enable (struct usb_hcd *hcd)
-{
-	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
-
-	spin_lock_irq(&ohci->lock);
-	if (!ohci->autostop)
-		del_timer(&hcd->rh_timer);	/* Prevent next poll */
-	ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
-	spin_unlock_irq(&ohci->lock);
-}
-
 #define OHCI_SCHED_ENABLES \
 	(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
 
@@ -374,18 +362,28 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 		int any_connected)
 {
 	int	poll_rh = 1;
+	int	rhsc;
 
+	rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
 	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 
 	case OHCI_USB_OPER:
-		/* keep on polling until we know a device is connected
-		 * and RHSC is enabled */
+		/* If no status changes are pending, enable status-change
+		 * interrupts.
+		 */
+		if (!rhsc && !changed) {
+			rhsc = OHCI_INTR_RHSC;
+			ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
+		}
+
+		/* Keep on polling until we know a device is connected
+		 * and RHSC is enabled, or until we autostop.
+		 */
 		if (!ohci->autostop) {
 			if (any_connected ||
 					!device_may_wakeup(&ohci_to_hcd(ohci)
 						->self.root_hub->dev)) {
-				if (ohci_readl(ohci, &ohci->regs->intrenable) &
-						OHCI_INTR_RHSC)
+				if (rhsc)
 					poll_rh = 0;
 			} else {
 				ohci->autostop = 1;
@@ -398,12 +396,13 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 				ohci->autostop = 0;
 				ohci->next_statechange = jiffies +
 						STATECHANGE_DELAY;
-			} else if (time_after_eq(jiffies,
+			} else if (rhsc && time_after_eq(jiffies,
 						ohci->next_statechange)
 					&& !ohci->ed_rm_list
 					&& !(ohci->hc_control &
 						OHCI_SCHED_ENABLES)) {
 				ohci_rh_suspend(ohci, 1);
+				poll_rh = 0;
 			}
 		}
 		break;
@@ -417,6 +416,12 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 			else
 				usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
 		} else {
+			if (!rhsc && (ohci->autostop ||
+					ohci_to_hcd(ohci)->self.root_hub->
+						do_remote_wakeup))
+				ohci_writel(ohci, OHCI_INTR_RHSC,
+						&ohci->regs->intrenable);
+
 			/* everything is idle, no need for polling */
 			poll_rh = 0;
 		}
@@ -438,12 +443,16 @@ static inline int ohci_rh_resume(struct ohci_hcd *ohci)
 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 		int any_connected)
 {
-	int	poll_rh = 1;
-
-	/* keep on polling until RHSC is enabled */
+	/* If RHSC is enabled, don't poll */
 	if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
-		poll_rh = 0;
-	return poll_rh;
+		return 0;
+
+	/* If no status changes are pending, enable status-change interrupts */
+	if (!changed) {
+		ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+		return 0;
+	}
+	return 1;
 }
 
 #endif	/* CONFIG_PM */
@@ -483,6 +492,13 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		length++;
 	}
 
+	/* Some broken controllers never turn off RHCS in the interrupt
+	 * status register.  For their sake we won't re-enable RHSC
+	 * interrupts if the flag is already set.
+	 */
+	if (ohci_readl(ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC)
+		changed = 1;
+
 	/* look at each port */
 	for (i = 0; i < ohci->num_ports; i++) {
 		u32	status = roothub_portstatus (ohci, i);
@@ -572,8 +588,6 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
 	return 0;
 }
 
-static void start_hnp(struct ohci_hcd *ohci);
-
 #else
 
 #define	ohci_start_port_reset		NULL
@@ -760,7 +774,7 @@ static int ohci_hub_control (
 #ifdef	CONFIG_USB_OTG
 			if (hcd->self.otg_port == (wIndex + 1)
 					&& hcd->self.b_hnp_enable)
-				start_hnp(ohci);
+				ohci->start_hnp(ohci);
 			else
 #endif
 			ohci_writel (ohci, RH_PS_PSS,
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 1ef5d482c14..de42283149c 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/signal.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 extern int usb_disabled(void);
@@ -193,7 +193,6 @@ static const struct hc_driver ohci_lh7a404_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 6e5e5f81ac9..95b3ec89c12 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -19,15 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/usb.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/fpga.h>
+#include <mach/usb.h>
 
 
 /* OMAP-1510 OHCI has its own MMU for DMA */
@@ -208,7 +208,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 	if (cpu_is_omap16xx())
 		ocpi_enable();
 
-#ifdef	CONFIG_ARCH_OMAP_OTG
+#ifdef	CONFIG_USB_OTG
 	if (need_transceiver) {
 		ohci->transceiver = otg_get_transceiver();
 		if (ohci->transceiver) {
@@ -225,6 +225,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 			dev_err(hcd->self.controller, "can't find transceiver\n");
 			return -ENODEV;
 		}
+		ohci->start_hnp = start_hnp;
 	}
 #endif
 
@@ -260,7 +261,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 			omap_cfg_reg(W4_USB_HIGHZ);
 		}
 		ohci_writel(ohci, rh, &ohci->regs->roothub.a);
-		distrust_firmware = 0;
+		ohci->flags &= ~OHCI_QUIRK_HUB_POWER;
 	} else if (machine_is_nokia770()) {
 		/* We require a self-powered hub, which should have
 		 * plenty of power. */
@@ -469,7 +470,6 @@ static const struct hc_driver ohci_omap_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 4696cc912e1..a9c2ae36c7a 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -18,6 +18,28 @@
 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
 #endif
 
+#include <linux/pci.h>
+#include <linux/io.h>
+
+
+/* constants used to work around PM-related transfer
+ * glitches in some AMD 700 series southbridges
+ */
+#define AB_REG_BAR	0xf0
+#define AB_INDX(addr)	((addr) + 0x00)
+#define AB_DATA(addr)	((addr) + 0x04)
+#define AX_INDXC	0X30
+#define AX_DATAC	0x34
+
+#define NB_PCIE_INDX_ADDR	0xe0
+#define NB_PCIE_INDX_DATA	0xe4
+#define PCIE_P_CNTL		0x10040
+#define BIF_NB			0x10002
+
+static struct pci_dev *amd_smbus_dev;
+static struct pci_dev *amd_hb_dev;
+static int amd_ohci_iso_count;
+
 /*-------------------------------------------------------------------------*/
 
 static int broken_suspend(struct usb_hcd *hcd)
@@ -143,6 +165,103 @@ static int ohci_quirk_nec(struct usb_hcd *hcd)
 	return 0;
 }
 
+static int ohci_quirk_amd700(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	u8 rev = 0;
+
+	if (!amd_smbus_dev)
+		amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+				PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+	if (!amd_smbus_dev)
+		return 0;
+
+	pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+	if ((rev > 0x3b) || (rev < 0x30)) {
+		pci_dev_put(amd_smbus_dev);
+		amd_smbus_dev = NULL;
+		return 0;
+	}
+
+	amd_ohci_iso_count++;
+
+	if (!amd_hb_dev)
+		amd_hb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9600, NULL);
+
+	ohci->flags |= OHCI_QUIRK_AMD_ISO;
+	ohci_dbg(ohci, "enabled AMD ISO transfers quirk\n");
+
+	return 0;
+}
+
+/*
+ * The hardware normally enables the A-link power management feature, which
+ * lets the system lower the power consumption in idle states.
+ *
+ * Assume the system is configured to have USB 1.1 ISO transfers going
+ * to or from a USB device.  Without this quirk, that stream may stutter
+ * or have breaks occasionally.  For transfers going to speakers, this
+ * makes a very audible mess...
+ *
+ * That audio playback corruption is due to the audio stream getting
+ * interrupted occasionally when the link goes in lower power state
+ * This USB quirk prevents the link going into that lower power state
+ * during audio playback or other ISO operations.
+ */
+static void quirk_amd_pll(int on)
+{
+	u32 addr;
+	u32 val;
+	u32 bit = (on > 0) ? 1 : 0;
+
+	pci_read_config_dword(amd_smbus_dev, AB_REG_BAR, &addr);
+
+	/* BIT names/meanings are NDA-protected, sorry ... */
+
+	outl(AX_INDXC, AB_INDX(addr));
+	outl(0x40, AB_DATA(addr));
+	outl(AX_DATAC, AB_INDX(addr));
+	val = inl(AB_DATA(addr));
+	val &= ~((1 << 3) | (1 << 4) | (1 << 9));
+	val |= (bit << 3) | ((!bit) << 4) | ((!bit) << 9);
+	outl(val, AB_DATA(addr));
+
+	if (amd_hb_dev) {
+		addr = PCIE_P_CNTL;
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
+
+		pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
+		val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
+		val |= bit | (bit << 3) | (bit << 12);
+		val |= ((!bit) << 4) | ((!bit) << 9);
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
+
+		addr = BIF_NB;
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
+
+		pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
+		val &= ~(1 << 8);
+		val |= bit << 8;
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
+	}
+}
+
+static void amd_iso_dev_put(void)
+{
+	amd_ohci_iso_count--;
+	if (amd_ohci_iso_count == 0) {
+		if (amd_smbus_dev) {
+			pci_dev_put(amd_smbus_dev);
+			amd_smbus_dev = NULL;
+		}
+		if (amd_hb_dev) {
+			pci_dev_put(amd_hb_dev);
+			amd_hb_dev = NULL;
+		}
+	}
+
+}
+
 /* List of quirks for OHCI */
 static const struct pci_device_id ohci_pci_quirks[] = {
 	{
@@ -181,6 +300,19 @@ static const struct pci_device_id ohci_pci_quirks[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
 		.driver_data = (unsigned long) broken_suspend,
 	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+
 	/* FIXME for some of the early AMD 760 southbridges, OHCI
 	 * won't work at all.  blacklist them.
 	 */
@@ -327,7 +459,6 @@ static const struct hc_driver ohci_pci_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 6ad8f2fc57b..658a2a978c3 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -21,13 +21,12 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 
-#include <asm/arch/platform.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
 
 #define USB_CTRL	IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
 
@@ -278,7 +277,6 @@ static const struct hc_driver ohci_pnx4008_hc_driver = {
 	 */
 	.hub_status_data = ohci_hub_status_data,
 	.hub_control = ohci_hub_control,
-	.hub_irq_enable = ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend = ohci_bus_suspend,
 	.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index 605d59cba28..28467e288a9 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -201,7 +201,6 @@ static const struct hc_driver ohci_pnx8550_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 91e6e101a4c..7ac53264ead 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -72,7 +72,6 @@ static const struct hc_driver ohci_ppc_of_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 523c3012557..cd3398b675b 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -172,7 +172,6 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 55c95647f00..2089d8a46c4 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -68,7 +68,6 @@ static const struct hc_driver ps3_ohci_hc_driver = {
 	.get_frame_number	= ohci_get_frame,
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
-	.hub_irq_enable		= ohci_rhsc_enable,
 	.start_port_reset	= ohci_start_port_reset,
 #if defined(CONFIG_PM)
 	.bus_suspend 		= ohci_bus_suspend,
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 127b1579902..7f0f35c7818 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -24,11 +24,10 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
-#include <asm/arch/ohci.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
+#include <mach/ohci.h>
 
 #define PXA_UHC_MAX_PORTNUM    3
 
@@ -299,7 +298,6 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef  CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 6a9b4c55795..c2d80f80448 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -49,6 +49,9 @@ __acquires(ohci->lock)
 	switch (usb_pipetype (urb->pipe)) {
 	case PIPE_ISOCHRONOUS:
 		ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--;
+		if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
+				&& quirk_amdiso(ohci))
+			quirk_amd_pll(1);
 		break;
 	case PIPE_INTERRUPT:
 		ohci_to_hcd(ohci)->self.bandwidth_int_reqs--;
@@ -677,6 +680,9 @@ static void td_submit_urb (
 				data + urb->iso_frame_desc [cnt].offset,
 				urb->iso_frame_desc [cnt].length, urb, cnt);
 		}
+		if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
+				&& quirk_amdiso(ohci))
+			quirk_amd_pll(0);
 		periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0
 			&& ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0;
 		break;
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 3c7a740cfe0..f46af7a718d 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -22,8 +22,8 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/usb-control.h>
+#include <mach/hardware.h>
+#include <mach/usb-control.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
 
@@ -466,7 +466,6 @@ static const struct hc_driver ohci_s3c2410_hc_driver = {
 	 */
 	.hub_status_data =	ohci_s3c2410_hub_status_data,
 	.hub_control =		ohci_s3c2410_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 2e9dceb9bb9..e4bbe8e188e 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -13,10 +13,10 @@
  * This file is licenced under the GPL.
  */
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/badge4.h>
+#include <mach/assabet.h>
+#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #ifndef CONFIG_SA1111
@@ -231,7 +231,6 @@ static const struct hc_driver ohci_sa1111_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index e7ee607278f..60f03cc7ec4 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -68,7 +68,6 @@ static const struct hc_driver ohci_sh_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 21b164e4abe..cff23637cfc 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -75,7 +75,6 @@ static const struct hc_driver ohci_sm501_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index 3660c83d80a..23fd6a886bd 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -81,7 +81,6 @@ static const struct hc_driver ssb_ohci_hc_driver = {
 
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
-	.hub_irq_enable		= ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend		= ohci_bus_suspend,
 	.bus_resume		= ohci_bus_resume,
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index dc544ddc784..faf622eafce 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -371,6 +371,7 @@ struct ohci_hcd {
 	 * other external transceivers should be software-transparent
 	 */
 	struct otg_transceiver	*transceiver;
+	void (*start_hnp)(struct ohci_hcd *ohci);
 
 	/*
 	 * memory management for queue data structures
@@ -399,6 +400,8 @@ struct ohci_hcd {
 #define	OHCI_QUIRK_ZFMICRO	0x20			/* Compaq ZFMicro chipset*/
 #define	OHCI_QUIRK_NEC		0x40			/* lost interrupts */
 #define	OHCI_QUIRK_FRAME_NO	0x80			/* no big endian frame_no shift */
+#define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
+#define	OHCI_QUIRK_AMD_ISO	0x200			/* ISO transfers*/
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
@@ -426,6 +429,10 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci)
 {
 	return ohci->flags & OHCI_QUIRK_ZFMICRO;
 }
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+	return ohci->flags & OHCI_QUIRK_AMD_ISO;
+}
 #else
 static inline int quirk_nec(struct ohci_hcd *ohci)
 {
@@ -435,6 +442,10 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci)
 {
 	return 0;
 }
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+	return 0;
+}
 #endif
 
 /* convert between an hcd pointer and the corresponding ohci_hcd */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index d5f02dddb12..ea7126f99ca 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -964,11 +964,34 @@ static void pipe_irq_disable(struct r8a66597 *r8a66597, u16 pipenum)
 	disable_irq_nrdy(r8a66597, pipenum);
 }
 
+static void r8a66597_root_hub_start_polling(struct r8a66597 *r8a66597)
+{
+	mod_timer(&r8a66597->rh_timer,
+			jiffies + msecs_to_jiffies(R8A66597_RH_POLL_TIME));
+}
+
+static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port,
+					int connect)
+{
+	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+
+	rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
+	rh->scount = R8A66597_MAX_SAMPLING;
+	if (connect)
+		rh->port |= 1 << USB_PORT_FEAT_CONNECTION;
+	else
+		rh->port &= ~(1 << USB_PORT_FEAT_CONNECTION);
+	rh->port |= 1 << USB_PORT_FEAT_C_CONNECTION;
+
+	r8a66597_root_hub_start_polling(r8a66597);
+}
+
 /* this function must be called with interrupt disabled */
 static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
 					u16 syssts)
 {
 	if (syssts == SE0) {
+		r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
 		r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
 		return;
 	}
@@ -1002,13 +1025,10 @@ static void r8a66597_usb_disconnect(struct r8a66597 *r8a66597, int port)
 {
 	struct r8a66597_device *dev = r8a66597->root_hub[port].dev;
 
-	r8a66597->root_hub[port].port &= ~(1 << USB_PORT_FEAT_CONNECTION);
-	r8a66597->root_hub[port].port |= (1 << USB_PORT_FEAT_C_CONNECTION);
-
 	disable_r8a66597_pipe_all(r8a66597, dev);
 	free_usb_address(r8a66597, dev);
 
-	r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
+	start_root_hub_sampling(r8a66597, port, 0);
 }
 
 /* this function must be called with interrupt disabled */
@@ -1551,23 +1571,6 @@ static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
 	}
 }
 
-static void r8a66597_root_hub_start_polling(struct r8a66597 *r8a66597)
-{
-	mod_timer(&r8a66597->rh_timer,
-			jiffies + msecs_to_jiffies(R8A66597_RH_POLL_TIME));
-}
-
-static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port)
-{
-	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
-
-	rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
-	rh->scount = R8A66597_MAX_SAMPLING;
-	r8a66597->root_hub[port].port |= (1 << USB_PORT_FEAT_CONNECTION)
-					 | (1 << USB_PORT_FEAT_C_CONNECTION);
-	r8a66597_root_hub_start_polling(r8a66597);
-}
-
 static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 {
 	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
@@ -1594,7 +1597,7 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 			r8a66597_bclr(r8a66597, ATTCHE, INTENB2);
 
 			/* start usb bus sampling */
-			start_root_hub_sampling(r8a66597, 1);
+			start_root_hub_sampling(r8a66597, 1, 1);
 		}
 		if (mask2 & DTCH) {
 			r8a66597_write(r8a66597, ~DTCH, INTSTS2);
@@ -1609,7 +1612,7 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 			r8a66597_bclr(r8a66597, ATTCHE, INTENB1);
 
 			/* start usb bus sampling */
-			start_root_hub_sampling(r8a66597, 0);
+			start_root_hub_sampling(r8a66597, 0, 1);
 		}
 		if (mask1 & DTCH) {
 			r8a66597_write(r8a66597, ~DTCH, INTSTS1);
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 20ad3c48fcb..228f2b070f2 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2934,16 +2934,6 @@ static int u132_start_port_reset(struct usb_hcd *hcd, unsigned port_num)
 		return 0;
 }
 
-static void u132_hub_irq_enable(struct usb_hcd *hcd)
-{
-	struct u132 *u132 = hcd_to_u132(hcd);
-	if (u132->going > 1) {
-		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
-			, u132->going);
-	} else if (u132->going > 0)
-		dev_err(&u132->platform_dev->dev, "device is being removed\n");
-}
-
 
 #ifdef CONFIG_PM
 static int u132_bus_suspend(struct usb_hcd *hcd)
@@ -2995,7 +2985,6 @@ static struct hc_driver u132_hc_driver = {
 	.bus_suspend = u132_bus_suspend,
 	.bus_resume = u132_bus_resume,
 	.start_port_reset = u132_start_port_reset,
-	.hub_irq_enable = u132_hub_irq_enable,
 };
 
 /*
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 001789c9a11..4ea50e0abcb 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -42,16 +42,6 @@ config USB_ADUTUX
 	  To compile this driver as a module, choose M here.  The module
 	  will be called adutux.
 
-config USB_AUERSWALD
-	tristate "USB Auerswald ISDN support"
-	depends on USB
-	help
-	  Say Y here if you want to connect an Auerswald USB ISDN Device
-	  to your computer's USB port.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called auerswald.
-
 config USB_RIO500
 	tristate "USB Diamond Rio500 support"
 	depends on USB
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index aba091cb5ec..45b4e12afb0 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -5,7 +5,6 @@
 
 obj-$(CONFIG_USB_ADUTUX)	+= adutux.o
 obj-$(CONFIG_USB_APPLEDISPLAY)	+= appledisplay.o
-obj-$(CONFIG_USB_AUERSWALD)	+= auerswald.o
 obj-$(CONFIG_USB_BERRY_CHARGE)	+= berry_charge.o
 obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)	+= cytherm.o
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
deleted file mode 100644
index d2f61d5510e..00000000000
--- a/drivers/usb/misc/auerswald.c
+++ /dev/null
@@ -1,2152 +0,0 @@
-/*****************************************************************************/
-/*
- *      auerswald.c  --  Auerswald PBX/System Telephone usb driver.
- *
- *      Copyright (C) 2001  Wolfgang Mües (wolfgang@iksw-muees.de)
- *
- *      Very much code of this driver is borrowed from dabusb.c (Deti Fliegl)
- *      and from the USB Skeleton driver (Greg Kroah-Hartman). Thank you.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- /*****************************************************************************/
-
-/* Standard Linux module include files */
-#include <asm/uaccess.h>
-#include <asm/byteorder.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-/*-------------------------------------------------------------------*/
-/* Debug support 						     */
-#ifdef DEBUG
-#define dump( adr, len) \
-do {			\
-	unsigned int u;	\
-	printk (KERN_DEBUG); \
-	for (u = 0; u < len; u++) \
-		printk (" %02X", adr[u] & 0xFF); \
-	printk ("\n"); \
-} while (0)
-#else
-#define dump( adr, len)
-#endif
-
-/*-------------------------------------------------------------------*/
-/* Version Information */
-#define DRIVER_VERSION "0.9.11"
-#define DRIVER_AUTHOR  "Wolfgang Mües <wolfgang@iksw-muees.de>"
-#define DRIVER_DESC    "Auerswald PBX/System Telephone usb driver"
-
-/*-------------------------------------------------------------------*/
-/* Private declarations for Auerswald USB driver                     */
-
-/* Auerswald Vendor ID */
-#define ID_AUERSWALD  	0x09BF
-
-#define AUER_MINOR_BASE	112	/* auerswald driver minor number */
-
-/* we can have up to this number of device plugged in at once */
-#define AUER_MAX_DEVICES 16
-
-
-/* Number of read buffers for each device */
-#define AU_RBUFFERS     10
-
-/* Number of chain elements for each control chain */
-#define AUCH_ELEMENTS   20
-
-/* Number of retries in communication */
-#define AU_RETRIES	10
-
-/*-------------------------------------------------------------------*/
-/* vendor specific protocol                                          */
-/* Header Byte */
-#define AUH_INDIRMASK   0x80    /* mask for direct/indirect bit */
-#define AUH_DIRECT      0x00    /* data is for USB device */
-#define AUH_INDIRECT    0x80    /* USB device is relay */
-
-#define AUH_SPLITMASK   0x40    /* mask for split bit */
-#define AUH_UNSPLIT     0x00    /* data block is full-size */
-#define AUH_SPLIT       0x40    /* data block is part of a larger one,
-                                   split-byte follows */
-
-#define AUH_TYPEMASK    0x3F    /* mask for type of data transfer */
-#define AUH_TYPESIZE    0x40    /* different types */
-#define AUH_DCHANNEL    0x00    /* D channel data */
-#define AUH_B1CHANNEL   0x01    /* B1 channel transparent */
-#define AUH_B2CHANNEL   0x02    /* B2 channel transparent */
-/*                0x03..0x0F       reserved for driver internal use */
-#define AUH_COMMAND     0x10    /* Command channel */
-#define AUH_BPROT       0x11    /* Configuration block protocol */
-#define AUH_DPROTANA    0x12    /* D channel protocol analyzer */
-#define AUH_TAPI        0x13    /* telephone api data (ATD) */
-/*                0x14..0x3F       reserved for other protocols */
-#define AUH_UNASSIGNED  0xFF    /* if char device has no assigned service */
-#define AUH_FIRSTUSERCH 0x11    /* first channel which is available for driver users */
-
-#define AUH_SIZE	1 	/* Size of Header Byte */
-
-/* Split Byte. Only present if split bit in header byte set.*/
-#define AUS_STARTMASK   0x80    /* mask for first block of splitted frame */
-#define AUS_FIRST       0x80    /* first block */
-#define AUS_FOLLOW      0x00    /* following block */
-
-#define AUS_ENDMASK     0x40    /* mask for last block of splitted frame */
-#define AUS_END         0x40    /* last block */
-#define AUS_NOEND       0x00    /* not the last block */
-
-#define AUS_LENMASK     0x3F    /* mask for block length information */
-
-/* Request types */
-#define AUT_RREQ        (USB_DIR_IN  | USB_TYPE_VENDOR | USB_RECIP_OTHER)   /* Read Request */
-#define AUT_WREQ        (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER)   /* Write Request */
-
-/* Vendor Requests */
-#define AUV_GETINFO     0x00    /* GetDeviceInfo */
-#define AUV_WBLOCK      0x01    /* Write Block */
-#define AUV_RBLOCK      0x02    /* Read Block */
-#define AUV_CHANNELCTL  0x03    /* Channel Control */
-#define AUV_DUMMY	0x04	/* Dummy Out for retry */
-
-/* Device Info Types */
-#define AUDI_NUMBCH     0x0000  /* Number of supported B channels */
-#define AUDI_OUTFSIZE   0x0001  /* Size of OUT B channel fifos */
-#define AUDI_MBCTRANS   0x0002  /* max. Blocklength of control transfer */
-
-/* Interrupt endpoint definitions */
-#define AU_IRQENDP      1       /* Endpoint number */
-#define AU_IRQCMDID     16      /* Command-block ID */
-#define AU_BLOCKRDY     0       /* Command: Block data ready on ctl endpoint */
-#define AU_IRQMINSIZE	5	/* Nr. of bytes decoded in this driver */
-
-/* Device String Descriptors */
-#define AUSI_VENDOR   	1	/* "Auerswald GmbH & Co. KG" */
-#define AUSI_DEVICE   	2	/* Name of the Device */
-#define AUSI_SERIALNR 	3	/* Serial Number */
-#define AUSI_MSN      	4	/* "MSN ..." (first) Multiple Subscriber Number */
-
-#define AUSI_DLEN	100	/* Max. Length of Device Description */
-
-#define AUV_RETRY	0x101	/* First Firmware version which can do control retries */
-
-/*-------------------------------------------------------------------*/
-/* External data structures / Interface                              */
-typedef struct
-{
-	char __user *buf;	/* return buffer for string contents */
-	unsigned int bsize;	/* size of return buffer */
-} audevinfo_t,*paudevinfo_t;
-
-/* IO controls */
-#define IOCTL_AU_SLEN	  _IOR( 'U', 0xF0, int)         /* return the max. string descriptor length */
-#define IOCTL_AU_DEVINFO  _IOWR('U', 0xF1, audevinfo_t) /* get name of a specific device */
-#define IOCTL_AU_SERVREQ  _IOW( 'U', 0xF2, int) 	/* request a service channel */
-#define IOCTL_AU_BUFLEN	  _IOR( 'U', 0xF3, int)         /* return the max. buffer length for the device */
-#define IOCTL_AU_RXAVAIL  _IOR( 'U', 0xF4, int)         /* return != 0 if Receive Data available */
-#define IOCTL_AU_CONNECT  _IOR( 'U', 0xF5, int)         /* return != 0 if connected to a service channel */
-#define IOCTL_AU_TXREADY  _IOR( 'U', 0xF6, int)         /* return != 0 if Transmitt channel ready to send */
-/*                              'U'  0xF7..0xFF reseved */
-
-/*-------------------------------------------------------------------*/
-/* Internal data structures                                          */
-
-/* ..................................................................*/
-/* urb chain element */
-struct  auerchain;                      /* forward for circular reference */
-typedef struct
-{
-        struct auerchain *chain;        /* pointer to the chain to which this element belongs */
-        struct urb * urbp;                   /* pointer to attached urb */
-        void *context;                  /* saved URB context */
-        usb_complete_t complete;        /* saved URB completion function */
-        struct list_head list;          /* to include element into a list */
-} auerchainelement_t,*pauerchainelement_t;
-
-/* urb chain */
-typedef struct auerchain
-{
-        pauerchainelement_t active;     /* element which is submitted to urb */
-	spinlock_t lock;                /* protection agains interrupts */
-        struct list_head waiting_list;  /* list of waiting elements */
-        struct list_head free_list;     /* list of available elements */
-} auerchain_t,*pauerchain_t;
-
-/* urb blocking completion helper struct */
-typedef struct
-{
-	wait_queue_head_t wqh;    	/* wait for completion */
-	unsigned int done;		/* completion flag */
-} auerchain_chs_t,*pauerchain_chs_t;
-
-/* ...................................................................*/
-/* buffer element */
-struct  auerbufctl;                     /* forward */
-typedef struct
-{
-        char *bufp;                     /* reference to allocated data buffer */
-        unsigned int len;               /* number of characters in data buffer */
-	unsigned int retries;		/* for urb retries */
-        struct usb_ctrlrequest *dr;	/* for setup data in control messages */
-        struct urb * urbp;                   /* USB urb */
-        struct auerbufctl *list;        /* pointer to list */
-        struct list_head buff_list;     /* reference to next buffer in list */
-} auerbuf_t,*pauerbuf_t;
-
-/* buffer list control block */
-typedef struct auerbufctl
-{
-        spinlock_t lock;                /* protection in interrupt */
-        struct list_head free_buff_list;/* free buffers */
-        struct list_head rec_buff_list; /* buffers with receive data */
-} auerbufctl_t,*pauerbufctl_t;
-
-/* ...................................................................*/
-/* service context */
-struct  auerscon;                       /* forward */
-typedef void (*auer_dispatch_t)(struct auerscon*, pauerbuf_t);
-typedef void (*auer_disconn_t) (struct auerscon*);
-typedef struct auerscon
-{
-        unsigned int id;                /* protocol service id AUH_xxxx */
-        auer_dispatch_t dispatch;       /* dispatch read buffer */
-	auer_disconn_t disconnect;	/* disconnect from device, wake up all char readers */
-} auerscon_t,*pauerscon_t;
-
-/* ...................................................................*/
-/* USB device context */
-typedef struct
-{
-	struct mutex 	mutex;         	    /* protection in user context */
-	char 			name[20];	    /* name of the /dev/usb entry */
-	unsigned int		dtindex;	    /* index in the device table */
-	struct usb_device *	usbdev;      	    /* USB device handle */
-	int			open_count;	    /* count the number of open character channels */
-        char 			dev_desc[AUSI_DLEN];/* for storing a textual description */
-        unsigned int 		maxControlLength;   /* max. Length of control paket (without header) */
-        struct urb * 		inturbp;            /* interrupt urb */
-        char *			intbufp;            /* data buffer for interrupt urb */
-	unsigned int 		irqsize;	    /* size of interrupt endpoint 1 */
-        struct auerchain 	controlchain;  	    /* for chaining of control messages */
-	auerbufctl_t 		bufctl;             /* Buffer control for control transfers */
-        pauerscon_t 	     	services[AUH_TYPESIZE];/* context pointers for each service */
-	unsigned int		version;	    /* Version of the device */
-	wait_queue_head_t 	bufferwait;         /* wait for a control buffer */
-} auerswald_t,*pauerswald_t;
-
-/* ................................................................... */
-/* character device context */
-typedef struct
-{
-	struct mutex mutex;		/* protection in user context */
-	pauerswald_t auerdev;           /* context pointer of assigned device */
-        auerbufctl_t bufctl;            /* controls the buffer chain */
-        auerscon_t scontext;            /* service context */
-	wait_queue_head_t readwait;     /* for synchronous reading */
-	struct mutex readmutex;		/* protection against multiple reads */
-	pauerbuf_t readbuf;		/* buffer held for partial reading */
-	unsigned int readoffset;	/* current offset in readbuf */
-	unsigned int removed;		/* is != 0 if device is removed */
-} auerchar_t,*pauerchar_t;
-
-
-/*-------------------------------------------------------------------*/
-/* Forwards */
-static void auerswald_ctrlread_complete (struct urb * urb);
-static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp);
-static struct usb_driver auerswald_driver;
-
-
-/*-------------------------------------------------------------------*/
-/* USB chain helper functions                                        */
-/* --------------------------                                        */
-
-/* completion function for chained urbs */
-static void auerchain_complete (struct urb * urb)
-{
-	unsigned long flags;
-        int result;
-
-        /* get pointer to element and to chain */
-	pauerchainelement_t acep = urb->context;
-        pauerchain_t         acp = acep->chain;
-
-        /* restore original entries in urb */
-        urb->context  = acep->context;
-        urb->complete = acep->complete;
-
-        dbg ("auerchain_complete called");
-
-        /* call original completion function
-           NOTE: this function may lead to more urbs submitted into the chain.
-                 (no chain lock at calling complete()!)
-                 acp->active != NULL is protecting us against recursion.*/
-        urb->complete (urb);
-
-        /* detach element from chain data structure */
-	spin_lock_irqsave (&acp->lock, flags);
-        if (acp->active != acep) /* paranoia debug check */
-	        dbg ("auerchain_complete: completion on non-active element called!");
-        else
-                acp->active = NULL;
-
-        /* add the used chain element to the list of free elements */
-	list_add_tail (&acep->list, &acp->free_list);
-        acep = NULL;
-
-        /* is there a new element waiting in the chain? */
-        if (!acp->active && !list_empty (&acp->waiting_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = acp->waiting_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                acp->active = acep;
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* submit the new urb */
-        if (acep) {
-                urb    = acep->urbp;
-                dbg ("auerchain_complete: submitting next urb from chain");
-		urb->status = 0;	/* needed! */
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-
-                /* check for submit errors */
-                if (result) {
-                        urb->status = result;
-                        dbg("auerchain_complete: usb_submit_urb with error code %d", result);
-                        /* and do error handling via *this* completion function (recursive) */
-                        auerchain_complete( urb);
-                }
-        } else {
-                /* simple return without submitting a new urb.
-                   The empty chain is detected with acp->active == NULL. */
-        };
-}
-
-
-/* submit function for chained urbs
-   this function may be called from completion context or from user space!
-   early = 1 -> submit in front of chain
-*/
-static int auerchain_submit_urb_list (pauerchain_t acp, struct urb * urb, int early)
-{
-        int result;
-        unsigned long flags;
-        pauerchainelement_t acep = NULL;
-
-        dbg ("auerchain_submit_urb called");
-
-        /* try to get a chain element */
-        spin_lock_irqsave (&acp->lock, flags);
-        if (!list_empty (&acp->free_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* if no chain element available: return with error */
-        if (!acep) {
-                return -ENOMEM;
-        }
-
-        /* fill in the new chain element values */
-        acep->chain    = acp;
-        acep->context  = urb->context;
-        acep->complete = urb->complete;
-        acep->urbp     = urb;
-        INIT_LIST_HEAD (&acep->list);
-
-        /* modify urb */
-        urb->context   = acep;
-        urb->complete  = auerchain_complete;
-        urb->status    = -EINPROGRESS;    /* usb_submit_urb does this, too */
-
-        /* add element to chain - or start it immediately */
-        spin_lock_irqsave (&acp->lock, flags);
-        if (acp->active) {
-                /* there is traffic in the chain, simple add element to chain */
-		if (early) {
-			dbg ("adding new urb to head of chain");
-			list_add (&acep->list, &acp->waiting_list);
-		} else {
-			dbg ("adding new urb to end of chain");
-			list_add_tail (&acep->list, &acp->waiting_list);
-		}
-		acep = NULL;
-        } else {
-                /* the chain is empty. Prepare restart */
-                acp->active = acep;
-        }
-        /* Spin has to be removed before usb_submit_urb! */
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* Submit urb if immediate restart */
-        if (acep) {
-                dbg("submitting urb immediate");
-		urb->status = 0;	/* needed! */
-                result = usb_submit_urb(urb, GFP_ATOMIC);
-                /* check for submit errors */
-                if (result) {
-                        urb->status = result;
-                        dbg("auerchain_submit_urb: usb_submit_urb with error code %d", result);
-                        /* and do error handling via completion function */
-                        auerchain_complete( urb);
-                }
-        }
-
-        return 0;
-}
-
-/* submit function for chained urbs
-   this function may be called from completion context or from user space!
-*/
-static int auerchain_submit_urb (pauerchain_t acp, struct urb * urb)
-{
-	return auerchain_submit_urb_list (acp, urb, 0);
-}
-
-/* cancel an urb which is submitted to the chain
-   the result is 0 if the urb is cancelled, or -EINPROGRESS if
-   the function is successfully started.
-*/
-static int auerchain_unlink_urb (pauerchain_t acp, struct urb * urb)
-{
-	unsigned long flags;
-        struct urb * urbp;
-        pauerchainelement_t acep;
-        struct list_head *tmp;
-
-        dbg ("auerchain_unlink_urb called");
-
-        /* search the chain of waiting elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        list_for_each (tmp, &acp->waiting_list) {
-                acep = list_entry (tmp, auerchainelement_t, list);
-                if (acep->urbp == urb) {
-                        list_del (tmp);
-                        urb->context = acep->context;
-                        urb->complete = acep->complete;
-                        list_add_tail (&acep->list, &acp->free_list);
-                        spin_unlock_irqrestore (&acp->lock, flags);
-                        dbg ("unlink waiting urb");
-                        urb->status = -ENOENT;
-                        urb->complete (urb);
-                        return 0;
-                }
-        }
-        /* not found. */
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* get the active urb */
-        acep = acp->active;
-        if (acep) {
-                urbp = acep->urbp;
-
-                /* check if we have to cancel the active urb */
-                if (urbp == urb) {
-                        /* note that there is a race condition between the check above
-                           and the unlink() call because of no lock. This race is harmless,
-                           because the usb module will detect the unlink() after completion.
-                           We can't use the acp->lock here because the completion function
-                           wants to grab it.
-			*/
-                        dbg ("unlink active urb");
-                        return usb_unlink_urb (urbp);
-                }
-        }
-
-        /* not found anyway
-           ... is some kind of success
-	*/
-        dbg ("urb to unlink not found in chain");
-        return 0;
-}
-
-/* cancel all urbs which are in the chain.
-   this function must not be called from interrupt or completion handler.
-*/
-static void auerchain_unlink_all (pauerchain_t acp)
-{
-	unsigned long flags;
-        struct urb * urbp;
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_unlink_all called");
-
-        /* clear the chain of waiting elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        while (!list_empty (&acp->waiting_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->waiting_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                urbp = acep->urbp;
-                urbp->context = acep->context;
-                urbp->complete = acep->complete;
-                list_add_tail (&acep->list, &acp->free_list);
-                spin_unlock_irqrestore (&acp->lock, flags);
-                dbg ("unlink waiting urb");
-                urbp->status = -ENOENT;
-                urbp->complete (urbp);
-                spin_lock_irqsave (&acp->lock, flags);
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* clear the active urb */
-        acep = acp->active;
-        if (acep) {
-                urbp = acep->urbp;
-                dbg ("unlink active urb");
-                usb_kill_urb (urbp);
-        }
-}
-
-
-/* free the chain.
-   this function must not be called from interrupt or completion handler.
-*/
-static void auerchain_free (pauerchain_t acp)
-{
-	unsigned long flags;
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_free called");
-
-        /* first, cancel all pending urbs */
-        auerchain_unlink_all (acp);
-
-        /* free the elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        while (!list_empty (&acp->free_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                spin_unlock_irqrestore (&acp->lock, flags);
-		acep = list_entry (tmp, auerchainelement_t, list);
-                kfree (acep);
-	        spin_lock_irqsave (&acp->lock, flags);
-	}
-        spin_unlock_irqrestore (&acp->lock, flags);
-}
-
-
-/* Init the chain control structure */
-static void auerchain_init (pauerchain_t acp)
-{
-        /* init the chain data structure */
-        acp->active = NULL;
-	spin_lock_init (&acp->lock);
-        INIT_LIST_HEAD (&acp->waiting_list);
-        INIT_LIST_HEAD (&acp->free_list);
-}
-
-/* setup a chain.
-   It is assumed that there is no concurrency while setting up the chain
-   requirement: auerchain_init()
-*/
-static int auerchain_setup (pauerchain_t acp, unsigned int numElements)
-{
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_setup called with %d elements", numElements);
-
-        /* fill the list of free elements */
-        for (;numElements; numElements--) {
-                acep = kzalloc(sizeof(auerchainelement_t), GFP_KERNEL);
-                if (!acep)
-			goto ac_fail;
-                INIT_LIST_HEAD (&acep->list);
-                list_add_tail (&acep->list, &acp->free_list);
-        }
-        return 0;
-
-ac_fail:/* free the elements */
-        while (!list_empty (&acp->free_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                kfree (acep);
-        }
-        return -ENOMEM;
-}
-
-
-/* completion handler for synchronous chained URBs */
-static void auerchain_blocking_completion (struct urb *urb)
-{
-	pauerchain_chs_t pchs = urb->context;
-	pchs->done = 1;
-	wmb();
-	wake_up (&pchs->wqh);
-}
-
-
-/* Starts chained urb and waits for completion or timeout */
-static int auerchain_start_wait_urb (pauerchain_t acp, struct urb *urb, int timeout, int* actual_length)
-{
-	auerchain_chs_t chs;
-	int status;
-
-	dbg ("auerchain_start_wait_urb called");
-	init_waitqueue_head (&chs.wqh);
-	chs.done = 0;
-
-	urb->context = &chs;
-	status = auerchain_submit_urb (acp, urb);
-	if (status)
-		/* something went wrong */
-		return status;
-
-	timeout = wait_event_timeout(chs.wqh, chs.done, timeout);
-
-	if (!timeout && !chs.done) {
-		if (urb->status != -EINPROGRESS) {	/* No callback?!! */
-			dbg ("auerchain_start_wait_urb: raced timeout");
-			status = urb->status;
-		} else {
-			dbg ("auerchain_start_wait_urb: timeout");
-			auerchain_unlink_urb (acp, urb);  /* remove urb safely */
-			status = -ETIMEDOUT;
-		}
-	} else
-		status = urb->status;
-
-	if (status >= 0)
-		*actual_length = urb->actual_length;
-
-  	return status;
-}
-
-
-/* auerchain_control_msg - Builds a control urb, sends it off and waits for completion
-   acp: pointer to the auerchain
-   dev: pointer to the usb device to send the message to
-   pipe: endpoint "pipe" to send the message to
-   request: USB message request value
-   requesttype: USB message request type value
-   value: USB message value
-   index: USB message index value
-   data: pointer to the data to send
-   size: length in bytes of the data to send
-   timeout: time to wait for the message to complete before timing out (if 0 the wait is forever)
-
-   This function sends a simple control message to a specified endpoint
-   and waits for the message to complete, or timeout.
-
-   If successful, it returns the transferred length, otherwise a negative error number.
-
-   Don't use this function from within an interrupt context, like a
-   bottom half handler.  If you need an asynchronous message, or need to send
-   a message from within interrupt context, use auerchain_submit_urb()
-*/
-static int auerchain_control_msg (pauerchain_t acp, struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype,
-			          __u16 value, __u16 index, void *data, __u16 size, int timeout)
-{
-	int ret;
-	struct usb_ctrlrequest *dr;
-	struct urb *urb;
-        int uninitialized_var(length);
-
-        dbg ("auerchain_control_msg");
-        dr = kmalloc (sizeof (struct usb_ctrlrequest), GFP_KERNEL);
-	if (!dr)
-		return -ENOMEM;
-	urb = usb_alloc_urb (0, GFP_KERNEL);
-	if (!urb) {
-        	kfree (dr);
-		return -ENOMEM;
-        }
-
-	dr->bRequestType = requesttype;
-	dr->bRequest = request;
-	dr->wValue  = cpu_to_le16 (value);
-	dr->wIndex  = cpu_to_le16 (index);
-	dr->wLength = cpu_to_le16 (size);
-
-	usb_fill_control_urb (urb, dev, pipe, (unsigned char*)dr, data, size,    /* build urb */
-		          auerchain_blocking_completion, NULL);
-	ret = auerchain_start_wait_urb (acp, urb, timeout, &length);
-
-	usb_free_urb (urb);
-	kfree (dr);
-
-        if (ret < 0)
-		return ret;
-	else
-		return length;
-}
-
-
-/*-------------------------------------------------------------------*/
-/* Buffer List helper functions                                      */
-
-/* free a single auerbuf */
-static void auerbuf_free (pauerbuf_t bp)
-{
-	kfree(bp->bufp);
-	kfree(bp->dr);
-	usb_free_urb(bp->urbp);
-	kfree(bp);
-}
-
-/* free the buffers from an auerbuf list */
-static void auerbuf_free_list (struct list_head *q)
-{
-        struct list_head *tmp;
-	struct list_head *p;
-	pauerbuf_t bp;
-
-	dbg ("auerbuf_free_list");
-	for (p = q->next; p != q;) {
-		bp = list_entry (p, auerbuf_t, buff_list);
-		tmp = p->next;
-		list_del (p);
-		p = tmp;
-		auerbuf_free (bp);
-	}
-}
-
-/* init the members of a list control block */
-static void auerbuf_init (pauerbufctl_t bcp)
-{
-	dbg ("auerbuf_init");
-	spin_lock_init (&bcp->lock);
-        INIT_LIST_HEAD (&bcp->free_buff_list);
-        INIT_LIST_HEAD (&bcp->rec_buff_list);
-}
-
-/* free all buffers from an auerbuf chain */
-static void auerbuf_free_buffers (pauerbufctl_t bcp)
-{
-	unsigned long flags;
-	dbg ("auerbuf_free_buffers");
-
-        spin_lock_irqsave (&bcp->lock, flags);
-
-	auerbuf_free_list (&bcp->free_buff_list);
-	auerbuf_free_list (&bcp->rec_buff_list);
-
-        spin_unlock_irqrestore (&bcp->lock, flags);
-}
-
-/* setup a list of buffers */
-/* requirement: auerbuf_init() */
-static int auerbuf_setup (pauerbufctl_t bcp, unsigned int numElements, unsigned int bufsize)
-{
-        pauerbuf_t bep = NULL;
-
-        dbg ("auerbuf_setup called with %d elements of %d bytes", numElements, bufsize);
-
-        /* fill the list of free elements */
-        for (;numElements; numElements--) {
-                bep = kzalloc(sizeof(auerbuf_t), GFP_KERNEL);
-                if (!bep)
-			goto bl_fail;
-                bep->list = bcp;
-                INIT_LIST_HEAD (&bep->buff_list);
-                bep->bufp = kmalloc (bufsize, GFP_KERNEL);
-                if (!bep->bufp)
-			goto bl_fail;
-                bep->dr = kmalloc(sizeof (struct usb_ctrlrequest), GFP_KERNEL);
-                if (!bep->dr)
-			goto bl_fail;
-                bep->urbp = usb_alloc_urb (0, GFP_KERNEL);
-                if (!bep->urbp)
-			goto bl_fail;
-                list_add_tail (&bep->buff_list, &bcp->free_buff_list);
-        }
-        return 0;
-
-bl_fail:/* not enough memory. Free allocated elements */
-        dbg ("auerbuf_setup: no more memory");
-	auerbuf_free(bep);
-        auerbuf_free_buffers (bcp);
-        return -ENOMEM;
-}
-
-/* insert a used buffer into the free list */
-static void auerbuf_releasebuf( pauerbuf_t bp)
-{
-        unsigned long flags;
-        pauerbufctl_t bcp = bp->list;
-	bp->retries = 0;
-
-        dbg ("auerbuf_releasebuf called");
-        spin_lock_irqsave (&bcp->lock, flags);
-	list_add_tail (&bp->buff_list, &bcp->free_buff_list);
-        spin_unlock_irqrestore (&bcp->lock, flags);
-}
-
-
-/*-------------------------------------------------------------------*/
-/* Completion handlers */
-
-/* Values of urb->status or results of usb_submit_urb():
-0		Initial, OK
--EINPROGRESS	during submission until end
--ENOENT		if urb is unlinked
--ETIME		Device did not respond
--ENOMEM		Memory Overflow
--ENODEV		Specified USB-device or bus doesn't exist
--ENXIO		URB already queued
--EINVAL		a) Invalid transfer type specified (or not supported)
-		b) Invalid interrupt interval (0n256)
--EAGAIN		a) Specified ISO start frame too early
-		b) (using ISO-ASAP) Too much scheduled for the future wait some time and try again.
--EFBIG		Too much ISO frames requested (currently uhci900)
--EPIPE		Specified pipe-handle/Endpoint is already stalled
--EMSGSIZE	Endpoint message size is zero, do interface/alternate setting
--EPROTO		a) Bitstuff error
-		b) Unknown USB error
--EILSEQ		CRC mismatch
--ENOSR		Buffer error
--EREMOTEIO	Short packet detected
--EXDEV		ISO transfer only partially completed look at individual frame status for details
--EINVAL		ISO madness, if this happens: Log off and go home
--EOVERFLOW	babble
-*/
-
-/* check if a status code allows a retry */
-static int auerswald_status_retry (int status)
-{
-	switch (status) {
-	case 0:
-	case -ETIME:
-	case -EOVERFLOW:
-	case -EAGAIN:
-	case -EPIPE:
-	case -EPROTO:
-	case -EILSEQ:
-	case -ENOSR:
-	case -EREMOTEIO:
-		return 1; /* do a retry */
-	}
-	return 0;	/* no retry possible */
-}
-
-/* Completion of asynchronous write block */
-static void auerchar_ctrlwrite_complete (struct urb * urb)
-{
-	pauerbuf_t bp =  urb->context;
-	pauerswald_t cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-	dbg ("auerchar_ctrlwrite_complete called");
-
-	/* reuse the buffer */
-	auerbuf_releasebuf (bp);
-	/* Wake up all processes waiting for a buffer */
-	wake_up (&cp->bufferwait);
-}
-
-/* Completion handler for dummy retry packet */
-static void auerswald_ctrlread_wretcomplete (struct urb * urb)
-{
-	pauerbuf_t bp = urb->context;
-        pauerswald_t cp;
-	int ret;
-	int status = urb->status;
-
-        dbg ("auerswald_ctrlread_wretcomplete called");
-        dbg ("complete with status: %d", status);
-	cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-
-	/* check if it is possible to advance */
-	if (!auerswald_status_retry(status) || !cp->usbdev) {
-		/* reuse the buffer */
-		err ("control dummy: transmission error %d, can not retry", status);
-		auerbuf_releasebuf (bp);
-		/* Wake up all processes waiting for a buffer */
-		wake_up (&cp->bufferwait);
-		return;
-	}
-
-	/* fill the control message */
-	bp->dr->bRequestType = AUT_RREQ;
-	bp->dr->bRequest     = AUV_RBLOCK;
-	bp->dr->wLength      = bp->dr->wValue;	/* temporary stored */
-	bp->dr->wValue       = cpu_to_le16 (1);	/* Retry Flag */
-	/* bp->dr->index    = channel id;          remains */
-	usb_fill_control_urb (bp->urbp, cp->usbdev, usb_rcvctrlpipe (cp->usbdev, 0),
-                          (unsigned char*)bp->dr, bp->bufp, le16_to_cpu (bp->dr->wLength),
-		          auerswald_ctrlread_complete,bp);
-
-	/* submit the control msg as next paket */
-	ret = auerchain_submit_urb_list (&cp->controlchain, bp->urbp, 1);
-        if (ret) {
-        	dbg ("auerswald_ctrlread_complete: nonzero result of auerchain_submit_urb_list %d", ret);
-        	bp->urbp->status = ret;
-        	auerswald_ctrlread_complete (bp->urbp);
-    	}
-}
-
-/* completion handler for receiving of control messages */
-static void auerswald_ctrlread_complete (struct urb * urb)
-{
-        unsigned int  serviceid;
-        pauerswald_t  cp;
-        pauerscon_t   scp;
-	pauerbuf_t bp = urb->context;
-	int status = urb->status;
-	int ret;
-
-        dbg ("auerswald_ctrlread_complete called");
-
-	cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-
-	/* check if there is valid data in this urb */
-        if (status) {
-		dbg ("complete with non-zero status: %d", status);
-		/* should we do a retry? */
-		if (!auerswald_status_retry(status)
-		 || !cp->usbdev
-		 || (cp->version < AUV_RETRY)
-                 || (bp->retries >= AU_RETRIES)) {
-			/* reuse the buffer */
-			err ("control read: transmission error %d, can not retry", status);
-			auerbuf_releasebuf (bp);
-			/* Wake up all processes waiting for a buffer */
-			wake_up (&cp->bufferwait);
-			return;
-		}
-		bp->retries++;
-		dbg ("Retry count = %d", bp->retries);
-		/* send a long dummy control-write-message to allow device firmware to react */
-		bp->dr->bRequestType = AUT_WREQ;
-		bp->dr->bRequest     = AUV_DUMMY;
-		bp->dr->wValue       = bp->dr->wLength; /* temporary storage */
-		// bp->dr->wIndex    channel ID remains
-		bp->dr->wLength      = cpu_to_le16 (32); /* >= 8 bytes */
-		usb_fill_control_urb (bp->urbp, cp->usbdev, usb_sndctrlpipe (cp->usbdev, 0),
-  			(unsigned char*)bp->dr, bp->bufp, 32,
-	   		auerswald_ctrlread_wretcomplete,bp);
-
-		/* submit the control msg as next paket */
-       		ret = auerchain_submit_urb_list (&cp->controlchain, bp->urbp, 1);
-       		if (ret) {
-               		dbg ("auerswald_ctrlread_complete: nonzero result of auerchain_submit_urb_list %d", ret);
-               		bp->urbp->status = ret;
-               		auerswald_ctrlread_wretcomplete (bp->urbp);
-		}
-                return;
-        }
-
-        /* get the actual bytecount (incl. headerbyte) */
-        bp->len = urb->actual_length;
-        serviceid = bp->bufp[0] & AUH_TYPEMASK;
-        dbg ("Paket with serviceid %d and %d bytes received", serviceid, bp->len);
-
-        /* dispatch the paket */
-        scp = cp->services[serviceid];
-        if (scp) {
-                /* look, Ma, a listener! */
-                scp->dispatch (scp, bp);
-        }
-
-        /* release the paket */
-        auerbuf_releasebuf (bp);
-	/* Wake up all processes waiting for a buffer */
-	wake_up (&cp->bufferwait);
-}
-
-/*-------------------------------------------------------------------*/
-/* Handling of Interrupt Endpoint                                    */
-/* This interrupt Endpoint is used to inform the host about waiting
-   messages from the USB device.
-*/
-/* int completion handler. */
-static void auerswald_int_complete (struct urb * urb)
-{
-        unsigned long flags;
-        unsigned  int channelid;
-        unsigned  int bytecount;
-        int ret;
-	int status = urb->status;
-        pauerbuf_t   bp = NULL;
-	pauerswald_t cp = urb->context;
-
-        dbg ("%s called", __func__);
-
-	switch (status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__, status);
-		goto exit;
-	}
-
-        /* check if all needed data was received */
-	if (urb->actual_length < AU_IRQMINSIZE) {
-                dbg ("invalid data length received: %d bytes", urb->actual_length);
-		goto exit;
-        }
-
-        /* check the command code */
-        if (cp->intbufp[0] != AU_IRQCMDID) {
-                dbg ("invalid command received: %d", cp->intbufp[0]);
-		goto exit;
-        }
-
-        /* check the command type */
-        if (cp->intbufp[1] != AU_BLOCKRDY) {
-                dbg ("invalid command type received: %d", cp->intbufp[1]);
-		goto exit;
-        }
-
-        /* now extract the information */
-        channelid = cp->intbufp[2];
-        bytecount = (unsigned char)cp->intbufp[3];
-        bytecount |= (unsigned char)cp->intbufp[4] << 8;
-
-        /* check the channel id */
-        if (channelid >= AUH_TYPESIZE) {
-                dbg ("invalid channel id received: %d", channelid);
-		goto exit;
-        }
-
-        /* check the byte count */
-        if (bytecount > (cp->maxControlLength+AUH_SIZE)) {
-                dbg ("invalid byte count received: %d", bytecount);
-		goto exit;
-        }
-        dbg ("Service Channel = %d", channelid);
-        dbg ("Byte Count = %d", bytecount);
-
-        /* get a buffer for the next data paket */
-        spin_lock_irqsave (&cp->bufctl.lock, flags);
-        if (!list_empty (&cp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = cp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&cp->bufctl.lock, flags);
-
-        /* if no buffer available: skip it */
-        if (!bp) {
-                dbg ("auerswald_int_complete: no data buffer available");
-                /* can we do something more?
-		   This is a big problem: if this int packet is ignored, the
-		   device will wait forever and not signal any more data.
-		   The only real solution is: having enough buffers!
-		   Or perhaps temporary disabling the int endpoint?
-		*/
-		goto exit;
-        }
-
-	/* fill the control message */
-        bp->dr->bRequestType = AUT_RREQ;
-	bp->dr->bRequest     = AUV_RBLOCK;
-	bp->dr->wValue       = cpu_to_le16 (0);
-	bp->dr->wIndex       = cpu_to_le16 (channelid | AUH_DIRECT | AUH_UNSPLIT);
-	bp->dr->wLength      = cpu_to_le16 (bytecount);
-	usb_fill_control_urb (bp->urbp, cp->usbdev, usb_rcvctrlpipe (cp->usbdev, 0),
-                          (unsigned char*)bp->dr, bp->bufp, bytecount,
-		          auerswald_ctrlread_complete,bp);
-
-        /* submit the control msg */
-        ret = auerchain_submit_urb (&cp->controlchain, bp->urbp);
-        if (ret) {
-                dbg ("auerswald_int_complete: nonzero result of auerchain_submit_urb %d", ret);
-                bp->urbp->status = ret;
-                auerswald_ctrlread_complete( bp->urbp);
-		/* here applies the same problem as above: device locking! */
-        }
-exit:
-	ret = usb_submit_urb (urb, GFP_ATOMIC);
-	if (ret)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __func__, ret);
-}
-
-/* int memory deallocation
-   NOTE: no mutex please!
-*/
-static void auerswald_int_free (pauerswald_t cp)
-{
-	if (cp->inturbp) {
-		usb_free_urb(cp->inturbp);
-		cp->inturbp = NULL;
-	}
-	kfree(cp->intbufp);
-	cp->intbufp = NULL;
-}
-
-/* This function is called to activate the interrupt
-   endpoint. This function returns 0 if successful or an error code.
-   NOTE: no mutex please!
-*/
-static int auerswald_int_open (pauerswald_t cp)
-{
-        int ret;
-	struct usb_host_endpoint *ep;
-	int irqsize;
-	dbg ("auerswald_int_open");
-
-	ep = cp->usbdev->ep_in[AU_IRQENDP];
-	if (!ep) {
-		ret = -EFAULT;
-  		goto intoend;
-    	}
-	irqsize = le16_to_cpu(ep->desc.wMaxPacketSize);
-	cp->irqsize = irqsize;
-
-	/* allocate the urb and data buffer */
-        if (!cp->inturbp) {
-                cp->inturbp = usb_alloc_urb (0, GFP_KERNEL);
-                if (!cp->inturbp) {
-                        ret = -ENOMEM;
-                        goto intoend;
-                }
-        }
-        if (!cp->intbufp) {
-                cp->intbufp = kmalloc (irqsize, GFP_KERNEL);
-                if (!cp->intbufp) {
-                        ret = -ENOMEM;
-                        goto intoend;
-                }
-        }
-        /* setup urb */
-        usb_fill_int_urb (cp->inturbp, cp->usbdev,
-			usb_rcvintpipe (cp->usbdev,AU_IRQENDP), cp->intbufp,
-			irqsize, auerswald_int_complete, cp, ep->desc.bInterval);
-        /* start the urb */
-	cp->inturbp->status = 0;	/* needed! */
-	ret = usb_submit_urb (cp->inturbp, GFP_KERNEL);
-
-intoend:
-        if (ret < 0) {
-                /* activation of interrupt endpoint has failed. Now clean up. */
-                dbg ("auerswald_int_open: activation of int endpoint failed");
-
-                /* deallocate memory */
-                auerswald_int_free (cp);
-        }
-        return ret;
-}
-
-/* This function is called to deactivate the interrupt
-   endpoint. This function returns 0 if successful or an error code.
-   NOTE: no mutex please!
-*/
-static void auerswald_int_release (pauerswald_t cp)
-{
-        dbg ("auerswald_int_release");
-
-        /* stop the int endpoint */
-	usb_kill_urb (cp->inturbp);
-
-        /* deallocate memory */
-        auerswald_int_free (cp);
-}
-
-/* --------------------------------------------------------------------- */
-/* Helper functions                                                      */
-
-/* wake up waiting readers */
-static void auerchar_disconnect (pauerscon_t scp)
-{
-        pauerchar_t ccp = ((pauerchar_t)((char *)(scp)-(unsigned long)(&((pauerchar_t)0)->scontext)));
-	dbg ("auerchar_disconnect called");
-	ccp->removed = 1;
-	wake_up (&ccp->readwait);
-}
-
-
-/* dispatch a read paket to a waiting character device */
-static void auerchar_ctrlread_dispatch (pauerscon_t scp, pauerbuf_t bp)
-{
-	unsigned long flags;
-        pauerchar_t ccp;
-        pauerbuf_t newbp = NULL;
-        char * charp;
-        dbg ("auerchar_ctrlread_dispatch called");
-        ccp = ((pauerchar_t)((char *)(scp)-(unsigned long)(&((pauerchar_t)0)->scontext)));
-
-        /* get a read buffer from character device context */
-        spin_lock_irqsave (&ccp->bufctl.lock, flags);
-        if (!list_empty (&ccp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = ccp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                newbp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-
-        if (!newbp) {
-                dbg ("No read buffer available, discard paket!");
-                return;     /* no buffer, no dispatch */
-        }
-
-        /* copy information to new buffer element
-           (all buffers have the same length) */
-        charp = newbp->bufp;
-        newbp->bufp = bp->bufp;
-        bp->bufp = charp;
-        newbp->len = bp->len;
-
-        /* insert new buffer in read list */
-        spin_lock_irqsave (&ccp->bufctl.lock, flags);
-	list_add_tail (&newbp->buff_list, &ccp->bufctl.rec_buff_list);
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-        dbg ("read buffer appended to rec_list");
-
-        /* wake up pending synchronous reads */
-	wake_up (&ccp->readwait);
-}
-
-
-/* Delete an auerswald driver context */
-static void auerswald_delete( pauerswald_t cp)
-{
-	dbg( "auerswald_delete");
-	if (cp == NULL)
-		return;
-
-	/* Wake up all processes waiting for a buffer */
-	wake_up (&cp->bufferwait);
-
-	/* Cleaning up */
-	auerswald_int_release (cp);
-	auerchain_free (&cp->controlchain);
-	auerbuf_free_buffers (&cp->bufctl);
-
-	/* release the memory */
-	kfree( cp);
-}
-
-
-/* Delete an auerswald character context */
-static void auerchar_delete( pauerchar_t ccp)
-{
-	dbg ("auerchar_delete");
-	if (ccp == NULL)
-		return;
-
-        /* wake up pending synchronous reads */
-	ccp->removed = 1;
-	wake_up (&ccp->readwait);
-
-	/* remove the read buffer */
-	if (ccp->readbuf) {
-		auerbuf_releasebuf (ccp->readbuf);
-		ccp->readbuf = NULL;
-	}
-
-	/* remove the character buffers */
-	auerbuf_free_buffers (&ccp->bufctl);
-
-	/* release the memory */
-	kfree( ccp);
-}
-
-
-/* add a new service to the device
-   scp->id must be set!
-   return: 0 if OK, else error code
-*/
-static int auerswald_addservice (pauerswald_t cp, pauerscon_t scp)
-{
-	int ret;
-
-	/* is the device available? */
-	if (!cp->usbdev) {
-		dbg ("usbdev == NULL");
-		return -EIO;	/*no: can not add a service, sorry*/
-	}
-
-	/* is the service available? */
-	if (cp->services[scp->id]) {
-		dbg ("service is busy");
-                return -EBUSY;
-	}
-
-	/* device is available, service is free */
-	cp->services[scp->id] = scp;
-
-	/* register service in device */
-	ret = auerchain_control_msg(
-		&cp->controlchain,                      /* pointer to control chain */
-		cp->usbdev,                             /* pointer to device */
-		usb_sndctrlpipe (cp->usbdev, 0),        /* pipe to control endpoint */
-		AUV_CHANNELCTL,                         /* USB message request value */
-		AUT_WREQ,                               /* USB message request type value */
-		0x01,              /* open                 USB message value */
-		scp->id,            		        /* USB message index value */
-		NULL,                                   /* pointer to the data to send */
-		0,                                      /* length in bytes of the data to send */
-		HZ * 2);                                /* time to wait for the message to complete before timing out */
-	if (ret < 0) {
-		dbg ("auerswald_addservice: auerchain_control_msg returned error code %d", ret);
-		/* undo above actions */
-		cp->services[scp->id] = NULL;
-		return ret;
-	}
-
-	dbg ("auerswald_addservice: channel open OK");
-	return 0;
-}
-
-
-/* remove a service from the device
-   scp->id must be set! */
-static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp)
-{
-	dbg ("auerswald_removeservice called");
-
-	/* check if we have a service allocated */
-	if (scp->id == AUH_UNASSIGNED)
-		return;
-
-	/* If there is a device: close the channel */
-	if (cp->usbdev) {
-		/* Close the service channel inside the device */
-		int ret = auerchain_control_msg(
-		&cp->controlchain,            		/* pointer to control chain */
-		cp->usbdev,         		        /* pointer to device */
-		usb_sndctrlpipe (cp->usbdev, 0),	/* pipe to control endpoint */
-		AUV_CHANNELCTL,                         /* USB message request value */
-		AUT_WREQ,                               /* USB message request type value */
-		0x00,              // close             /* USB message value */
-		scp->id,            		        /* USB message index value */
-		NULL,                                   /* pointer to the data to send */
-		0,                                      /* length in bytes of the data to send */
-		HZ * 2);                                /* time to wait for the message to complete before timing out */
-		if (ret < 0) {
-			dbg ("auerswald_removeservice: auerchain_control_msg returned error code %d", ret);
-		}
-		else {
-			dbg ("auerswald_removeservice: channel close OK");
-		}
-	}
-
-	/* remove the service from the device */
-	cp->services[scp->id] = NULL;
-	scp->id = AUH_UNASSIGNED;
-}
-
-
-/* --------------------------------------------------------------------- */
-/* Char device functions                                                 */
-
-/* Open a new character device */
-static int auerchar_open (struct inode *inode, struct file *file)
-{
-	int dtindex = iminor(inode);
-	pauerswald_t cp = NULL;
-	pauerchar_t ccp = NULL;
-	struct usb_interface *intf;
-        int ret;
-
-        /* minor number in range? */
-	if (dtindex < 0) {
-		return -ENODEV;
-        }
-	intf = usb_find_interface(&auerswald_driver, dtindex);
-	if (!intf) {
-		return -ENODEV;
-	}
-
-	/* usb device available? */
-	cp = usb_get_intfdata (intf);
-	if (cp == NULL) {
-		return -ENODEV;
-	}
-	if (mutex_lock_interruptible(&cp->mutex)) {
-		return -ERESTARTSYS;
-	}
-
-	/* we have access to the device. Now lets allocate memory */
-	ccp = kzalloc(sizeof(auerchar_t), GFP_KERNEL);
-	if (ccp == NULL) {
-		err ("out of memory");
-		ret = -ENOMEM;
-		goto ofail;
-	}
-
-	/* Initialize device descriptor */
-	mutex_init(&ccp->mutex);
-	mutex_init(&ccp->readmutex);
-        auerbuf_init (&ccp->bufctl);
-        ccp->scontext.id = AUH_UNASSIGNED;
-        ccp->scontext.dispatch = auerchar_ctrlread_dispatch;
-	ccp->scontext.disconnect = auerchar_disconnect;
-	init_waitqueue_head (&ccp->readwait);
-
-	ret = auerbuf_setup (&ccp->bufctl, AU_RBUFFERS, cp->maxControlLength+AUH_SIZE);
-       	if (ret) {
-		goto ofail;
-	}
-
-	cp->open_count++;
-	ccp->auerdev = cp;
-	dbg("open %s as /dev/%s", cp->dev_desc, cp->name);
-	mutex_unlock(&cp->mutex);
-
-	/* file IO stuff */
-	file->f_pos = 0;
-	file->private_data = ccp;
-	return nonseekable_open(inode, file);
-
-	/* Error exit */
-ofail:	mutex_unlock(&cp->mutex);
-	auerchar_delete (ccp);
-	return ret;
-}
-
-
-/* IOCTL functions */
-static long auerchar_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg)
-{
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-	int ret = 0;
-        audevinfo_t devinfo;
-        pauerswald_t cp = NULL;
-	unsigned int u;
-	unsigned int __user *user_arg = (unsigned int __user *)arg;
-
-        dbg ("ioctl");
-
-	/* get the mutexes */
-	if (mutex_lock_interruptible(&ccp->mutex)) {
-		return -ERESTARTSYS;
-	}
-	cp = ccp->auerdev;
-	if (!cp) {
-		mutex_unlock(&ccp->mutex);
-                return -ENODEV;
-	}
-	if (mutex_lock_interruptible(&cp->mutex)) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-
-	/* Check for removal */
-	if (!cp->usbdev) {
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-                return -ENODEV;
-	}
-	lock_kernel();
-	switch (cmd) {
-
-	/* return != 0 if Transmitt channel ready to send */
-	case IOCTL_AU_TXREADY:
-		dbg ("IOCTL_AU_TXREADY");
-		u   = ccp->auerdev
-		   && (ccp->scontext.id != AUH_UNASSIGNED)
-		   && !list_empty (&cp->bufctl.free_buff_list);
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* return != 0 if connected to a service channel */
-	case IOCTL_AU_CONNECT:
-		dbg ("IOCTL_AU_CONNECT");
-		u = (ccp->scontext.id != AUH_UNASSIGNED);
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* return != 0 if Receive Data available */
-	case IOCTL_AU_RXAVAIL:
-		dbg ("IOCTL_AU_RXAVAIL");
-		if (ccp->scontext.id == AUH_UNASSIGNED) {
-                        ret = -EIO;
-                        break;
-                }
-		u = 0;	/* no data */
-		if (ccp->readbuf) {
-			int restlen = ccp->readbuf->len - ccp->readoffset;
-			if (restlen > 0)
-				u = 1;
-		}
-		if (!u) {
-        		if (!list_empty (&ccp->bufctl.rec_buff_list)) {
-				u = 1;
-			}
-		}
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* return the max. buffer length for the device */
-	case IOCTL_AU_BUFLEN:
-		dbg ("IOCTL_AU_BUFLEN");
-		u = cp->maxControlLength;
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* requesting a service channel */
-        case IOCTL_AU_SERVREQ:
-		dbg ("IOCTL_AU_SERVREQ");
-                /* requesting a service means: release the previous one first */
-		auerswald_removeservice (cp, &ccp->scontext);
-		/* get the channel number */
-		ret = get_user (u, user_arg);
-		if (ret) {
-			break;
-		}
-		if ((u < AUH_FIRSTUSERCH) || (u >= AUH_TYPESIZE)) {
-                        ret = -EIO;
-                        break;
-                }
-                dbg ("auerchar service request parameters are ok");
-		ccp->scontext.id = u;
-
-		/* request the service now */
-		ret = auerswald_addservice (cp, &ccp->scontext);
-		if (ret) {
-			/* no: revert service entry */
-                	ccp->scontext.id = AUH_UNASSIGNED;
-		}
-		break;
-
-	/* get a string descriptor for the device */
-	case IOCTL_AU_DEVINFO:
-		dbg ("IOCTL_AU_DEVINFO");
-                if (copy_from_user (&devinfo, (void __user *) arg, sizeof (audevinfo_t))) {
-        		ret = -EFAULT;
-	        	break;
-                }
-		u = strlen(cp->dev_desc)+1;
-		if (u > devinfo.bsize) {
-			u = devinfo.bsize;
-		}
-		ret = copy_to_user(devinfo.buf, cp->dev_desc, u) ? -EFAULT : 0;
-		break;
-
-	/* get the max. string descriptor length */
-        case IOCTL_AU_SLEN:
-		dbg ("IOCTL_AU_SLEN");
-		u = AUSI_DLEN;
-	        ret = put_user (u, user_arg);
-		break;
-
-	default:
-		dbg ("IOCTL_AU_UNKNOWN");
-		ret = -ENOTTY;
-		break;
-        }
-        unlock_kernel();
-	/* release the mutexes */
-	mutex_unlock(&cp->mutex);
-	mutex_unlock(&ccp->mutex);
-	return ret;
-}
-
-/* Read data from the device */
-static ssize_t auerchar_read (struct file *file, char __user *buf, size_t count, loff_t * ppos)
-{
-        unsigned long flags;
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-        pauerbuf_t   bp = NULL;
-	wait_queue_t wait;
-
-        dbg ("auerchar_read");
-
-	/* Error checking */
-	if (!ccp)
-		return -EIO;
-	if (*ppos)
- 		return -ESPIPE;
-        if (count == 0)
-		return 0;
-
-	/* get the mutex */
-	if (mutex_lock_interruptible(&ccp->mutex))
-		return -ERESTARTSYS;
-
-	/* Can we expect to read something? */
-	if (ccp->scontext.id == AUH_UNASSIGNED) {
-		mutex_unlock(&ccp->mutex);
-                return -EIO;
-	}
-
-	/* only one reader per device allowed */
-	if (mutex_lock_interruptible(&ccp->readmutex)) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-
-	/* read data from readbuf, if available */
-doreadbuf:
-	bp = ccp->readbuf;
-	if (bp) {
-		/* read the maximum bytes */
-		int restlen = bp->len - ccp->readoffset;
-		if (restlen < 0)
-			restlen = 0;
-		if (count > restlen)
-			count = restlen;
-		if (count) {
-			if (copy_to_user (buf, bp->bufp+ccp->readoffset, count)) {
-				dbg ("auerswald_read: copy_to_user failed");
-				mutex_unlock(&ccp->readmutex);
-				mutex_unlock(&ccp->mutex);
-				return -EFAULT;
-			}
-		}
-		/* advance the read offset */
-		ccp->readoffset += count;
-		restlen -= count;
-		// reuse the read buffer
-		if (restlen <= 0) {
-			auerbuf_releasebuf (bp);
-			ccp->readbuf = NULL;
-		}
-		/* return with number of bytes read */
-		if (count) {
-			mutex_unlock(&ccp->readmutex);
-			mutex_unlock(&ccp->mutex);
-			return count;
-		}
-	}
-
-	/* a read buffer is not available. Try to get the next data block. */
-doreadlist:
-	/* Preparing for sleep */
-	init_waitqueue_entry (&wait, current);
-	set_current_state (TASK_INTERRUPTIBLE);
-	add_wait_queue (&ccp->readwait, &wait);
-
-	bp = NULL;
-	spin_lock_irqsave (&ccp->bufctl.lock, flags);
-        if (!list_empty (&ccp->bufctl.rec_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = ccp->bufctl.rec_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-
-	/* have we got data? */
-	if (bp) {
-		ccp->readbuf = bp;
-		ccp->readoffset = AUH_SIZE; /* for headerbyte */
-		set_current_state (TASK_RUNNING);
-		remove_wait_queue (&ccp->readwait, &wait);
-		goto doreadbuf;		  /* now we can read! */
-	}
-
-	/* no data available. Should we wait? */
-	if (file->f_flags & O_NONBLOCK) {
-                dbg ("No read buffer available, returning -EAGAIN");
-		set_current_state (TASK_RUNNING);
-		remove_wait_queue (&ccp->readwait, &wait);
-		mutex_unlock(&ccp->readmutex);
-		mutex_unlock(&ccp->mutex);
-		return -EAGAIN;  /* nonblocking, no data available */
-        }
-
-	/* yes, we should wait! */
-	mutex_unlock(&ccp->mutex); /* allow other operations while we wait */
-	schedule();
-	remove_wait_queue (&ccp->readwait, &wait);
-	if (signal_pending (current)) {
-		/* waked up by a signal */
-		mutex_unlock(&ccp->readmutex);
-		return -ERESTARTSYS;
-	}
-
-	/* Anything left to read? */
-	if ((ccp->scontext.id == AUH_UNASSIGNED) || ccp->removed) {
-		mutex_unlock(&ccp->readmutex);
-		return -EIO;
-	}
-
-	if (mutex_lock_interruptible(&ccp->mutex)) {
-		mutex_unlock(&ccp->readmutex);
-		return -ERESTARTSYS;
-	}
-
-	/* try to read the incoming data again */
-	goto doreadlist;
-}
-
-
-/* Write a data block into the right service channel of the device */
-static ssize_t auerchar_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
-{
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-        pauerswald_t cp = NULL;
-        pauerbuf_t bp;
-        unsigned long flags;
-	int ret;
-	wait_queue_t wait;
-
-        dbg ("auerchar_write %zd bytes", len);
-
-	/* Error checking */
-	if (!ccp)
-		return -EIO;
-        if (*ppos)
-		return -ESPIPE;
-        if (len == 0)
-                return 0;
-
-write_again:
-	/* get the mutex */
-	if (mutex_lock_interruptible(&ccp->mutex))
-		return -ERESTARTSYS;
-
-	/* Can we expect to write something? */
-	if (ccp->scontext.id == AUH_UNASSIGNED) {
-		mutex_unlock(&ccp->mutex);
-                return -EIO;
-	}
-
-	cp = ccp->auerdev;
-	if (!cp) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-	if (mutex_lock_interruptible(&cp->mutex)) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-	if (!cp->usbdev) {
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-		return -EIO;
-	}
-	/* Prepare for sleep */
-	init_waitqueue_entry (&wait, current);
-	set_current_state (TASK_INTERRUPTIBLE);
-	add_wait_queue (&cp->bufferwait, &wait);
-
-	/* Try to get a buffer from the device pool.
-	   We can't use a buffer from ccp->bufctl because the write
-	   command will last beond a release() */
-	bp = NULL;
-	spin_lock_irqsave (&cp->bufctl.lock, flags);
-        if (!list_empty (&cp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = cp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&cp->bufctl.lock, flags);
-
-	/* are there any buffers left? */
-	if (!bp) {
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-
-		/* NONBLOCK: don't wait */
-		if (file->f_flags & O_NONBLOCK) {
-			set_current_state (TASK_RUNNING);
-			remove_wait_queue (&cp->bufferwait, &wait);
-			return -EAGAIN;
-		}
-
-		/* BLOCKING: wait */
-		schedule();
-		remove_wait_queue (&cp->bufferwait, &wait);
-		if (signal_pending (current)) {
-			/* waked up by a signal */
-			return -ERESTARTSYS;
-		}
-		goto write_again;
-	} else {
-		set_current_state (TASK_RUNNING);
-		remove_wait_queue (&cp->bufferwait, &wait);
-	}
-
-	/* protect against too big write requests */
-	if (len > cp->maxControlLength)
-		len = cp->maxControlLength;
-
-	/* Fill the buffer */
-	if (copy_from_user ( bp->bufp+AUH_SIZE, buf, len)) {
-		dbg ("copy_from_user failed");
-		auerbuf_releasebuf (bp);
-		/* Wake up all processes waiting for a buffer */
-		wake_up (&cp->bufferwait);
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-		return -EFAULT;
-	}
-
-	/* set the header byte */
-        *(bp->bufp) = ccp->scontext.id | AUH_DIRECT | AUH_UNSPLIT;
-
-	/* Set the transfer Parameters */
-	bp->len = len+AUH_SIZE;
-        bp->dr->bRequestType = AUT_WREQ;
-	bp->dr->bRequest     = AUV_WBLOCK;
-	bp->dr->wValue       = cpu_to_le16 (0);
-	bp->dr->wIndex       = cpu_to_le16 (ccp->scontext.id | AUH_DIRECT | AUH_UNSPLIT);
-	bp->dr->wLength      = cpu_to_le16 (len+AUH_SIZE);
-	usb_fill_control_urb (bp->urbp, cp->usbdev, usb_sndctrlpipe (cp->usbdev, 0),
-                   (unsigned char*)bp->dr, bp->bufp, len+AUH_SIZE,
-		    auerchar_ctrlwrite_complete, bp);
-	/* up we go */
-	ret = auerchain_submit_urb (&cp->controlchain, bp->urbp);
-	mutex_unlock(&cp->mutex);
-	if (ret) {
-		dbg ("auerchar_write: nonzero result of auerchain_submit_urb %d", ret);
-		auerbuf_releasebuf (bp);
-		/* Wake up all processes waiting for a buffer */
-		wake_up (&cp->bufferwait);
-		mutex_unlock(&ccp->mutex);
-		return -EIO;
-	}
-	else {
-		dbg ("auerchar_write: Write OK");
-		mutex_unlock(&ccp->mutex);
-		return len;
-	}
-}
-
-
-/* Close a character device */
-static int auerchar_release (struct inode *inode, struct file *file)
-{
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-	pauerswald_t cp;
-	dbg("release");
-
-	mutex_lock(&ccp->mutex);
-	cp = ccp->auerdev;
-	if (cp) {
-		mutex_lock(&cp->mutex);
-		/* remove an open service */
-		auerswald_removeservice (cp, &ccp->scontext);
-		/* detach from device */
-		if ((--cp->open_count <= 0) && (cp->usbdev == NULL)) {
-			/* usb device waits for removal */
-			mutex_unlock(&cp->mutex);
-			auerswald_delete (cp);
-		} else {
-			mutex_unlock(&cp->mutex);
-		}
-		cp = NULL;
-		ccp->auerdev = NULL;
-	}
-	mutex_unlock(&ccp->mutex);
-	auerchar_delete (ccp);
-
-	return 0;
-}
-
-
-/*----------------------------------------------------------------------*/
-/* File operation structure                                             */
-static const struct file_operations auerswald_fops =
-{
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.read =		auerchar_read,
-	.write =        auerchar_write,
-	.unlocked_ioctl = auerchar_ioctl,
-	.open =		auerchar_open,
-	.release =	auerchar_release,
-};
-
-static struct usb_class_driver auerswald_class = {
-	.name =		"auer%d",
-	.fops =		&auerswald_fops,
-	.minor_base =	AUER_MINOR_BASE,
-};
-
-
-/* --------------------------------------------------------------------- */
-/* Special USB driver functions                                          */
-
-/* Probe if this driver wants to serve an USB device
-
-   This entry point is called whenever a new device is attached to the bus.
-   Then the device driver has to create a new instance of its internal data
-   structures for the new device.
-
-   The  dev argument specifies the device context, which contains pointers
-   to all USB descriptors. The  interface argument specifies the interface
-   number. If a USB driver wants to bind itself to a particular device and
-   interface it has to return a pointer. This pointer normally references
-   the device driver's context structure.
-
-   Probing normally is done by checking the vendor and product identifications
-   or the class and subclass definitions. If they match the interface number
-   is compared with the ones supported by the driver. When probing is done
-   class based it might be necessary to parse some more USB descriptors because
-   the device properties can differ in a wide range.
-*/
-static int auerswald_probe (struct usb_interface *intf,
-			    const struct usb_device_id *id)
-{
-	struct usb_device *usbdev = interface_to_usbdev(intf);
-	pauerswald_t cp = NULL;
-	unsigned int u = 0;
-	__le16 *pbuf;
-	int ret;
-
-	dbg ("probe: vendor id 0x%x, device id 0x%x",
-	     le16_to_cpu(usbdev->descriptor.idVendor),
-	     le16_to_cpu(usbdev->descriptor.idProduct));
-
-        /* we use only the first -and only- interface */
-        if (intf->altsetting->desc.bInterfaceNumber != 0)
-		return -ENODEV;
-
-	/* allocate memory for our device and initialize it */
-	cp = kzalloc (sizeof(auerswald_t), GFP_KERNEL);
-	if (cp == NULL) {
-		err ("out of memory");
-		goto pfail;
-	}
-
-	/* Initialize device descriptor */
-	mutex_init(&cp->mutex);
-	cp->usbdev = usbdev;
-	auerchain_init (&cp->controlchain);
-        auerbuf_init (&cp->bufctl);
-	init_waitqueue_head (&cp->bufferwait);
-
-	ret = usb_register_dev(intf, &auerswald_class);
-	if (ret) {
-		err ("Not able to get a minor for this device.");
-		goto pfail;
-	}
-
-	/* Give the device a name */
-	sprintf (cp->name, "usb/auer%d", intf->minor);
-
-	/* Store the index */
-	cp->dtindex = intf->minor;
-
-	/* Get the usb version of the device */
-	cp->version = le16_to_cpu(cp->usbdev->descriptor.bcdDevice);
-	dbg ("Version is %X", cp->version);
-
-	/* allow some time to settle the device */
-	msleep(334);
-
-	/* Try to get a suitable textual description of the device */
-	/* Device name:*/
-	ret = usb_string( cp->usbdev, AUSI_DEVICE, cp->dev_desc, AUSI_DLEN-1);
-	if (ret >= 0) {
-		u += ret;
-		/* Append Serial Number */
-		memcpy(&cp->dev_desc[u], ",Ser# ", 6);
-		u += 6;
-		ret = usb_string( cp->usbdev, AUSI_SERIALNR, &cp->dev_desc[u], AUSI_DLEN-u-1);
-		if (ret >= 0) {
-			u += ret;
-			/* Append subscriber number */
-			memcpy(&cp->dev_desc[u], ", ", 2);
-			u += 2;
-			ret = usb_string( cp->usbdev, AUSI_MSN, &cp->dev_desc[u], AUSI_DLEN-u-1);
-			if (ret >= 0) {
-				u += ret;
-			}
-		}
-	}
-	cp->dev_desc[u] = '\0';
-	info("device is a %s", cp->dev_desc);
-
-        /* get the maximum allowed control transfer length */
-        pbuf = kmalloc(2, GFP_KERNEL);    /* use an allocated buffer because of urb target */
-        if (!pbuf) {
-		err( "out of memory");
-		goto pfail;
-	}
-        ret = usb_control_msg(cp->usbdev,           /* pointer to device */
-                usb_rcvctrlpipe( cp->usbdev, 0 ),   /* pipe to control endpoint */
-                AUV_GETINFO,                        /* USB message request value */
-                AUT_RREQ,                           /* USB message request type value */
-                0,                                  /* USB message value */
-                AUDI_MBCTRANS,                      /* USB message index value */
-                pbuf,                               /* pointer to the receive buffer */
-                2,                                  /* length of the buffer */
-                2000);                            /* time to wait for the message to complete before timing out */
-        if (ret == 2) {
-	        cp->maxControlLength = le16_to_cpup(pbuf);
-                kfree(pbuf);
-                dbg("setup: max. allowed control transfersize is %d bytes", cp->maxControlLength);
-        } else {
-                kfree(pbuf);
-                err("setup: getting max. allowed control transfer length failed with error %d", ret);
-		goto pfail;
-        }
-
-	/* allocate a chain for the control messages */
-        if (auerchain_setup (&cp->controlchain, AUCH_ELEMENTS)) {
-		err ("out of memory");
-		goto pfail;
-	}
-
-        /* allocate buffers for control messages */
-	if (auerbuf_setup (&cp->bufctl, AU_RBUFFERS, cp->maxControlLength+AUH_SIZE)) {
-		err ("out of memory");
-		goto pfail;
-	}
-
-	/* start the interrupt endpoint */
-	if (auerswald_int_open (cp)) {
-		err ("int endpoint failed");
-		goto pfail;
-	}
-
-	/* all OK */
-	usb_set_intfdata (intf, cp);
-	return 0;
-
-	/* Error exit: clean up the memory */
-pfail:	auerswald_delete (cp);
-	return -EIO;
-}
-
-
-/* Disconnect driver from a served device
-
-   This function is called whenever a device which was served by this driver
-   is disconnected.
-
-   The argument  dev specifies the device context and the  driver_context
-   returns a pointer to the previously registered  driver_context of the
-   probe function. After returning from the disconnect function the USB
-   framework completely deallocates all data structures associated with
-   this device. So especially the usb_device structure must not be used
-   any longer by the usb driver.
-*/
-static void auerswald_disconnect (struct usb_interface *intf)
-{
-	pauerswald_t cp = usb_get_intfdata (intf);
-	unsigned int u;
-
-	usb_set_intfdata (intf, NULL);
-	if (!cp)
-		return;
-
-	/* give back our USB minor number */
-	usb_deregister_dev(intf, &auerswald_class);
-
-	mutex_lock(&cp->mutex);
-	info ("device /dev/%s now disconnecting", cp->name);
-
-	/* Stop the interrupt endpoint */
-	auerswald_int_release (cp);
-
-	/* remove the control chain allocated in auerswald_probe
-	   This has the benefit of
-	   a) all pending (a)synchronous urbs are unlinked
-	   b) all buffers dealing with urbs are reclaimed
-	*/
-	auerchain_free (&cp->controlchain);
-
-	if (cp->open_count == 0) {
-		/* nobody is using this device. So we can clean up now */
-		mutex_unlock(&cp->mutex);
-		/* mutex_unlock() is possible here because no other task
-		   can open the device (see above). I don't want
-		   to kfree() a locked mutex. */
-
-		auerswald_delete (cp);
-	} else {
-		/* device is used. Remove the pointer to the
-		   usb device (it's not valid any more). The last
-		   release() will do the clean up */
-		cp->usbdev = NULL;
-		mutex_unlock(&cp->mutex);
-		/* Terminate waiting writers */
-		wake_up (&cp->bufferwait);
-		/* Inform all waiting readers */
-		for ( u = 0; u < AUH_TYPESIZE; u++) {
-			pauerscon_t scp = cp->services[u];
-			if (scp)
-				scp->disconnect( scp);
-		}
-	}
-}
-
-/* Descriptor for the devices which are served by this driver.
-   NOTE: this struct is parsed by the usbmanager install scripts.
-         Don't change without caution!
-*/
-static struct usb_device_id auerswald_ids [] = {
-	{ USB_DEVICE (ID_AUERSWALD, 0x00C0) },          /* COMpact 2104 USB */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00DB) },          /* COMpact 4410/2206 USB */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00DC) }, /* COMpact 4406 DSL */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00DD) }, /* COMpact 2204 USB */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00F1) },          /* Comfort 2000 System Telephone */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00F2) },          /* Comfort 1200 System Telephone */
-        { }			                        /* Terminating entry */
-};
-
-/* Standard module device table */
-MODULE_DEVICE_TABLE (usb, auerswald_ids);
-
-/* Standard usb driver struct */
-static struct usb_driver auerswald_driver = {
-	.name =		"auerswald",
-	.probe =	auerswald_probe,
-	.disconnect =	auerswald_disconnect,
-	.id_table =	auerswald_ids,
-};
-
-
-/* --------------------------------------------------------------------- */
-/* Module loading/unloading                                              */
-
-/* Driver initialisation. Called after module loading.
-   NOTE: there is no concurrency at _init
-*/
-static int __init auerswald_init (void)
-{
-	int result;
-	dbg ("init");
-
-	/* register driver at the USB subsystem */
-	result = usb_register (&auerswald_driver);
-	if (result < 0) {
-		err ("driver could not be registered");
-		return -1;
-	}
-	return 0;
-}
-
-/* Driver deinit. Called before module removal.
-   NOTE: there is no concurrency at _cleanup
-*/
-static void __exit auerswald_cleanup (void)
-{
-	dbg ("cleanup");
-	usb_deregister (&auerswald_driver);
-}
-
-/* --------------------------------------------------------------------- */
-/* Linux device driver module description                                */
-
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
-
-module_init (auerswald_init);
-module_exit (auerswald_cleanup);
-
-/* --------------------------------------------------------------------- */
-
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index e6ca9979e3a..a4ef77ef917 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -19,7 +19,6 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/poll.h>
-#include <linux/version.h>
 #include <linux/usb/iowarrior.h>
 
 /* Version Information */
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index d94aa738760..b897f6554ec 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -48,7 +48,8 @@ static int isight_firmware_load(struct usb_interface *intf,
 
 	if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
 		printk(KERN_ERR "Unable to load isight firmware\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out;
 	}
 
 	ptr = firmware->data;
@@ -91,7 +92,6 @@ static int isight_firmware_load(struct usb_interface *intf,
 			     buf, llen, 300) != llen) {
 				printk(KERN_ERR
 				       "Failed to load isight firmware\n");
-				kfree(buf);
 				ret = -ENODEV;
 				goto out;
 			}
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index fbace41a7cb..69c34a58e20 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3270,6 +3270,7 @@ static struct usb_device_id sisusb_table [] = {
 	{ USB_DEVICE(0x0711, 0x0900) },
 	{ USB_DEVICE(0x0711, 0x0901) },
 	{ USB_DEVICE(0x0711, 0x0902) },
+	{ USB_DEVICE(0x0711, 0x0918) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
new file mode 100644
index 00000000000..a0017486ad4
--- /dev/null
+++ b/drivers/usb/musb/Kconfig
@@ -0,0 +1,175 @@
+#
+# USB Dual Role (OTG-ready) Controller Drivers
+# for silicon based on Mentor Graphics INVENTRA designs
+#
+
+comment "Enable Host or Gadget support to see Inventra options"
+	depends on !USB && USB_GADGET=n
+
+# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
+config USB_MUSB_HDRC
+	depends on (USB || USB_GADGET) && HAVE_CLK
+	select TWL4030_USB if MACH_OMAP_3430SDP
+	tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
+	help
+	  Say Y here if your system has a dual role high speed USB
+	  controller based on the Mentor Graphics silicon IP.  Then
+	  configure options to match your silicon and the board
+	  it's being used with, including the USB peripheral role,
+	  or the USB host role, or both.
+
+	  Texas Instruments parts using this IP include DaVinci 644x,
+	  OMAP 243x, OMAP 343x, and TUSB 6010.
+
+	  If you do not know what this is, please say N.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called "musb_hdrc".
+
+config USB_MUSB_SOC
+	boolean
+	depends on USB_MUSB_HDRC
+	default y if ARCH_DAVINCI
+	default y if ARCH_OMAP2430
+	default y if ARCH_OMAP34XX
+	help
+	  Use a static <asm/arch/hdrc_cnf.h> file to describe how the
+	  controller is configured (endpoints, mechanisms, etc) on the
+	  current iteration of a given system-on-chip.
+
+comment "DaVinci 644x USB support"
+	depends on USB_MUSB_HDRC && ARCH_DAVINCI
+
+comment "OMAP 243x high speed USB support"
+	depends on USB_MUSB_HDRC && ARCH_OMAP2430
+
+comment "OMAP 343x high speed USB support"
+	depends on USB_MUSB_HDRC && ARCH_OMAP34XX
+
+config USB_TUSB6010
+	boolean "TUSB 6010 support"
+	depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+	default y
+	help
+	  The TUSB 6010 chip, from Texas Instruments, connects a discrete
+	  HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
+	  (a high speed serial link).  It can use system-specific external
+	  DMA controllers.
+
+choice
+	prompt "Driver Mode"
+	depends on USB_MUSB_HDRC
+	help
+	  Dual-Role devices can support both host and peripheral roles,
+	  as well as a the special "OTG Device" role which can switch
+	  between both roles as needed.
+
+# use USB_MUSB_HDRC_HCD not USB_MUSB_HOST to #ifdef host side support;
+# OTG needs both roles, not just USB_MUSB_HOST.
+config USB_MUSB_HOST
+	depends on USB
+	bool "USB Host"
+	help
+	  Say Y here if your system supports the USB host role.
+	  If it has a USB "A" (rectangular), "Mini-A" (uncommon),
+	  or "Mini-AB" connector, it supports the host role.
+	  (With a "Mini-AB" connector, you should enable USB OTG.)
+
+# use USB_GADGET_MUSB_HDRC not USB_MUSB_PERIPHERAL to #ifdef peripheral
+# side support ... OTG needs both roles
+config USB_MUSB_PERIPHERAL
+	depends on USB_GADGET
+	bool "USB Peripheral (gadget stack)"
+	select USB_GADGET_MUSB_HDRC
+	help
+	  Say Y here if your system supports the USB peripheral role.
+	  If it has a USB "B" (squarish), "Mini-B", or "Mini-AB"
+	  connector, it supports the peripheral role.
+	  (With a "Mini-AB" connector, you should enable USB OTG.)
+
+config USB_MUSB_OTG
+	depends on USB && USB_GADGET && PM && EXPERIMENTAL
+	bool "Both host and peripheral:  USB OTG (On The Go) Device"
+	select USB_GADGET_MUSB_HDRC
+	select USB_OTG
+	help
+	   The most notable feature of USB OTG is support for a
+	   "Dual-Role" device, which can act as either a device
+	   or a host.  The initial role choice can be changed
+	   later, when two dual-role devices talk to each other.
+
+	   At this writing, the OTG support in this driver is incomplete,
+	   omitting the mandatory HNP or SRP protocols.  However, some
+	   of the cable based role switching works.  (That is, grounding
+	   the ID pin switches the controller to host mode, while leaving
+	   it floating leaves it in peripheral mode.)
+
+	   Select this if your system has a Mini-AB connector, or
+	   to simplify certain kinds of configuration.
+
+	   To implement your OTG Targeted Peripherals List (TPL), enable
+	   USB_OTG_WHITELIST and update "drivers/usb/core/otg_whitelist.h"
+	   to match your requirements.
+
+endchoice
+
+# enable peripheral support (including with OTG)
+config USB_GADGET_MUSB_HDRC
+	bool
+	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+#	default y
+#	select USB_GADGET_DUALSPEED
+#	select USB_GADGET_SELECTED
+
+# enables host support (including with OTG)
+config USB_MUSB_HDRC_HCD
+	bool
+	depends on USB_MUSB_HDRC && (USB_MUSB_HOST || USB_MUSB_OTG)
+	select USB_OTG if USB_GADGET_MUSB_HDRC
+	default y
+
+
+config MUSB_PIO_ONLY
+	bool 'Disable DMA (always use PIO)'
+	depends on USB_MUSB_HDRC
+	default y if USB_TUSB6010
+	help
+	  All data is copied between memory and FIFO by the CPU.
+	  DMA controllers are ignored.
+
+	  Do not select 'n' here unless DMA support for your SOC or board
+	  is unavailable (or unstable).  When DMA is enabled at compile time,
+	  you can still disable it at run time using the "use_dma=n" module
+	  parameter.
+
+config USB_INVENTRA_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	default ARCH_OMAP2430 || ARCH_OMAP34XX
+	help
+	  Enable DMA transfers using Mentor's engine.
+
+config USB_TI_CPPI_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	default ARCH_DAVINCI
+	help
+	  Enable DMA transfers when TI CPPI DMA is available.
+
+config USB_TUSB_OMAP_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	depends on USB_TUSB6010
+	depends on ARCH_OMAP
+	default y
+	help
+	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
+
+config	USB_MUSB_DEBUG
+	depends on USB_MUSB_HDRC
+	bool "Enable debugging messages"
+	default n
+	help
+	  This enables musb debugging. To set the logging level use the debug
+	  module parameter. Starting at level 3, per-transfer (urb, usb_request,
+	  packet, or dma transfer) tracing may kick in.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
new file mode 100644
index 00000000000..b6af0d687a7
--- /dev/null
+++ b/drivers/usb/musb/Makefile
@@ -0,0 +1,69 @@
+#
+# for USB OTG silicon based on Mentor Graphics INVENTRA designs
+#
+
+musb_hdrc-objs := musb_core.o
+
+obj-$(CONFIG_USB_MUSB_HDRC)	+= musb_hdrc.o
+
+ifeq ($(CONFIG_ARCH_DAVINCI),y)
+	musb_hdrc-objs	+= davinci.o
+endif
+
+ifeq ($(CONFIG_USB_TUSB6010),y)
+	musb_hdrc-objs	+= tusb6010.o
+endif
+
+ifeq ($(CONFIG_ARCH_OMAP2430),y)
+	musb_hdrc-objs	+= omap2430.o
+endif
+
+ifeq ($(CONFIG_ARCH_OMAP3430),y)
+	musb_hdrc-objs	+= omap2430.o
+endif
+
+ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
+	musb_hdrc-objs		+= musb_gadget_ep0.o musb_gadget.o
+endif
+
+ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
+	musb_hdrc-objs		+= musb_virthub.o musb_host.o
+endif
+
+# the kconfig must guarantee that only one of the
+# possible I/O schemes will be enabled at a time ...
+# PIO only, or DMA (several potential schemes).
+# though PIO is always there to back up DMA, and for ep0
+
+ifneq ($(CONFIG_MUSB_PIO_ONLY),y)
+
+  ifeq ($(CONFIG_USB_INVENTRA_DMA),y)
+    musb_hdrc-objs		+= musbhsdma.o
+
+  else
+    ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)
+      musb_hdrc-objs		+= cppi_dma.o
+
+    else
+      ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
+        musb_hdrc-objs		+= tusb6010_omap.o
+
+      endif
+    endif
+  endif
+endif
+
+
+################################################################################
+
+# FIXME remove all these extra "-DMUSB_* things, stick to CONFIG_*
+
+ifeq ($(CONFIG_USB_INVENTRA_MUSB_HAS_AHB_ID),y)
+	EXTRA_CFLAGS += -DMUSB_AHB_ID
+endif
+
+# Debugging
+
+ifeq ($(CONFIG_USB_MUSB_DEBUG),y)
+	EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
new file mode 100644
index 00000000000..5ad6d0893cb
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.c
@@ -0,0 +1,1540 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file implements a DMA  interface using TI's CPPI DMA.
+ * For now it's DaVinci-only, but CPPI isn't specific to DaVinci or USB.
+ * The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
+ */
+
+#include <linux/usb.h>
+
+#include "musb_core.h"
+#include "cppi_dma.h"
+
+
+/* CPPI DMA status 7-mar-2006:
+ *
+ * - See musb_{host,gadget}.c for more info
+ *
+ * - Correct RX DMA generally forces the engine into irq-per-packet mode,
+ *   which can easily saturate the CPU under non-mass-storage loads.
+ *
+ * NOTES 24-aug-2006 (2.6.18-rc4):
+ *
+ * - peripheral RXDMA wedged in a test with packets of length 512/512/1.
+ *   evidently after the 1 byte packet was received and acked, the queue
+ *   of BDs got garbaged so it wouldn't empty the fifo.  (rxcsr 0x2003,
+ *   and RX DMA0: 4 left, 80000000 8feff880, 8feff860 8feff860; 8f321401
+ *   004001ff 00000001 .. 8feff860)  Host was just getting NAKed on tx
+ *   of its next (512 byte) packet.  IRQ issues?
+ *
+ * REVISIT:  the "transfer DMA" glue between CPPI and USB fifos will
+ * evidently also directly update the RX and TX CSRs ... so audit all
+ * host and peripheral side DMA code to avoid CSR access after DMA has
+ * been started.
+ */
+
+/* REVISIT now we can avoid preallocating these descriptors; or
+ * more simply, switch to a global freelist not per-channel ones.
+ * Note: at full speed, 64 descriptors == 4K bulk data.
+ */
+#define NUM_TXCHAN_BD       64
+#define NUM_RXCHAN_BD       64
+
+static inline void cpu_drain_writebuffer(void)
+{
+	wmb();
+#ifdef	CONFIG_CPU_ARM926T
+	/* REVISIT this "should not be needed",
+	 * but lack of it sure seemed to hurt ...
+	 */
+	asm("mcr p15, 0, r0, c7, c10, 4 @ drain write buffer\n");
+#endif
+}
+
+static inline struct cppi_descriptor *cppi_bd_alloc(struct cppi_channel *c)
+{
+	struct cppi_descriptor	*bd = c->freelist;
+
+	if (bd)
+		c->freelist = bd->next;
+	return bd;
+}
+
+static inline void
+cppi_bd_free(struct cppi_channel *c, struct cppi_descriptor *bd)
+{
+	if (!bd)
+		return;
+	bd->next = c->freelist;
+	c->freelist = bd;
+}
+
+/*
+ *  Start DMA controller
+ *
+ *  Initialize the DMA controller as necessary.
+ */
+
+/* zero out entire rx state RAM entry for the channel */
+static void cppi_reset_rx(struct cppi_rx_stateram __iomem *rx)
+{
+	musb_writel(&rx->rx_skipbytes, 0, 0);
+	musb_writel(&rx->rx_head, 0, 0);
+	musb_writel(&rx->rx_sop, 0, 0);
+	musb_writel(&rx->rx_current, 0, 0);
+	musb_writel(&rx->rx_buf_current, 0, 0);
+	musb_writel(&rx->rx_len_len, 0, 0);
+	musb_writel(&rx->rx_cnt_cnt, 0, 0);
+}
+
+/* zero out entire tx state RAM entry for the channel */
+static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr)
+{
+	musb_writel(&tx->tx_head, 0, 0);
+	musb_writel(&tx->tx_buf, 0, 0);
+	musb_writel(&tx->tx_current, 0, 0);
+	musb_writel(&tx->tx_buf_current, 0, 0);
+	musb_writel(&tx->tx_info, 0, 0);
+	musb_writel(&tx->tx_rem_len, 0, 0);
+	/* musb_writel(&tx->tx_dummy, 0, 0); */
+	musb_writel(&tx->tx_complete, 0, ptr);
+}
+
+static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
+{
+	int	j;
+
+	/* initialize channel fields */
+	c->head = NULL;
+	c->tail = NULL;
+	c->last_processed = NULL;
+	c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+	c->controller = cppi;
+	c->is_rndis = 0;
+	c->freelist = NULL;
+
+	/* build the BD Free list for the channel */
+	for (j = 0; j < NUM_TXCHAN_BD + 1; j++) {
+		struct cppi_descriptor	*bd;
+		dma_addr_t		dma;
+
+		bd = dma_pool_alloc(cppi->pool, GFP_KERNEL, &dma);
+		bd->dma = dma;
+		cppi_bd_free(c, bd);
+	}
+}
+
+static int cppi_channel_abort(struct dma_channel *);
+
+static void cppi_pool_free(struct cppi_channel *c)
+{
+	struct cppi		*cppi = c->controller;
+	struct cppi_descriptor	*bd;
+
+	(void) cppi_channel_abort(&c->channel);
+	c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+	c->controller = NULL;
+
+	/* free all its bds */
+	bd = c->last_processed;
+	do {
+		if (bd)
+			dma_pool_free(cppi->pool, bd, bd->dma);
+		bd = cppi_bd_alloc(c);
+	} while (bd);
+	c->last_processed = NULL;
+}
+
+static int __init cppi_controller_start(struct dma_controller *c)
+{
+	struct cppi	*controller;
+	void __iomem	*tibase;
+	int		i;
+
+	controller = container_of(c, struct cppi, controller);
+
+	/* do whatever is necessary to start controller */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		controller->tx[i].transmit = true;
+		controller->tx[i].index = i;
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+		controller->rx[i].transmit = false;
+		controller->rx[i].index = i;
+	}
+
+	/* setup BD list on a per channel basis */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++)
+		cppi_pool_init(controller, controller->tx + i);
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+		cppi_pool_init(controller, controller->rx + i);
+
+	tibase =  controller->tibase;
+	INIT_LIST_HEAD(&controller->tx_complete);
+
+	/* initialise tx/rx channel head pointers to zero */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		struct cppi_channel	*tx_ch = controller->tx + i;
+		struct cppi_tx_stateram __iomem *tx;
+
+		INIT_LIST_HEAD(&tx_ch->tx_complete);
+
+		tx = tibase + DAVINCI_TXCPPI_STATERAM_OFFSET(i);
+		tx_ch->state_ram = tx;
+		cppi_reset_tx(tx, 0);
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+		struct cppi_channel	*rx_ch = controller->rx + i;
+		struct cppi_rx_stateram __iomem *rx;
+
+		INIT_LIST_HEAD(&rx_ch->tx_complete);
+
+		rx = tibase + DAVINCI_RXCPPI_STATERAM_OFFSET(i);
+		rx_ch->state_ram = rx;
+		cppi_reset_rx(rx);
+	}
+
+	/* enable individual cppi channels */
+	musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_INTENAB_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+	/* enable tx/rx CPPI control */
+	musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+
+	/* disable RNDIS mode, also host rx RNDIS autorequest */
+	musb_writel(tibase, DAVINCI_RNDIS_REG, 0);
+	musb_writel(tibase, DAVINCI_AUTOREQ_REG, 0);
+
+	return 0;
+}
+
+/*
+ *  Stop DMA controller
+ *
+ *  De-Init the DMA controller as necessary.
+ */
+
+static int cppi_controller_stop(struct dma_controller *c)
+{
+	struct cppi		*controller;
+	void __iomem		*tibase;
+	int			i;
+
+	controller = container_of(c, struct cppi, controller);
+
+	tibase = controller->tibase;
+	/* DISABLE INDIVIDUAL CHANNEL Interrupts */
+	musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_INTCLR_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+	DBG(1, "Tearing down RX and TX Channels\n");
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		/* FIXME restructure of txdma to use bds like rxdma */
+		controller->tx[i].last_processed = NULL;
+		cppi_pool_free(controller->tx + i);
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+		cppi_pool_free(controller->rx + i);
+
+	/* in Tx Case proper teardown is supported. We resort to disabling
+	 * Tx/Rx CPPI after cleanup of Tx channels. Before TX teardown is
+	 * complete TX CPPI cannot be disabled.
+	 */
+	/*disable tx/rx cppi */
+	musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+
+	return 0;
+}
+
+/* While dma channel is allocated, we only want the core irqs active
+ * for fault reports, otherwise we'd get irqs that we don't care about.
+ * Except for TX irqs, where dma done != fifo empty and reusable ...
+ *
+ * NOTE: docs don't say either way, but irq masking **enables** irqs.
+ *
+ * REVISIT same issue applies to pure PIO usage too, and non-cppi dma...
+ */
+static inline void core_rxirq_disable(void __iomem *tibase, unsigned epnum)
+{
+	musb_writel(tibase, DAVINCI_USB_INT_MASK_CLR_REG, 1 << (epnum + 8));
+}
+
+static inline void core_rxirq_enable(void __iomem *tibase, unsigned epnum)
+{
+	musb_writel(tibase, DAVINCI_USB_INT_MASK_SET_REG, 1 << (epnum + 8));
+}
+
+
+/*
+ * Allocate a CPPI Channel for DMA.  With CPPI, channels are bound to
+ * each transfer direction of a non-control endpoint, so allocating
+ * (and deallocating) is mostly a way to notice bad housekeeping on
+ * the software side.  We assume the irqs are always active.
+ */
+static struct dma_channel *
+cppi_channel_allocate(struct dma_controller *c,
+		struct musb_hw_ep *ep, u8 transmit)
+{
+	struct cppi		*controller;
+	u8			index;
+	struct cppi_channel	*cppi_ch;
+	void __iomem		*tibase;
+
+	controller = container_of(c, struct cppi, controller);
+	tibase = controller->tibase;
+
+	/* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */
+	index = ep->epnum - 1;
+
+	/* return the corresponding CPPI Channel Handle, and
+	 * probably disable the non-CPPI irq until we need it.
+	 */
+	if (transmit) {
+		if (index >= ARRAY_SIZE(controller->tx)) {
+			DBG(1, "no %cX%d CPPI channel\n", 'T', index);
+			return NULL;
+		}
+		cppi_ch = controller->tx + index;
+	} else {
+		if (index >= ARRAY_SIZE(controller->rx)) {
+			DBG(1, "no %cX%d CPPI channel\n", 'R', index);
+			return NULL;
+		}
+		cppi_ch = controller->rx + index;
+		core_rxirq_disable(tibase, ep->epnum);
+	}
+
+	/* REVISIT make this an error later once the same driver code works
+	 * with the other DMA engine too
+	 */
+	if (cppi_ch->hw_ep)
+		DBG(1, "re-allocating DMA%d %cX channel %p\n",
+				index, transmit ? 'T' : 'R', cppi_ch);
+	cppi_ch->hw_ep = ep;
+	cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+	DBG(4, "Allocate CPPI%d %cX\n", index, transmit ? 'T' : 'R');
+	return &cppi_ch->channel;
+}
+
+/* Release a CPPI Channel.  */
+static void cppi_channel_release(struct dma_channel *channel)
+{
+	struct cppi_channel	*c;
+	void __iomem		*tibase;
+
+	/* REVISIT:  for paranoia, check state and abort if needed... */
+
+	c = container_of(channel, struct cppi_channel, channel);
+	tibase = c->controller->tibase;
+	if (!c->hw_ep)
+		DBG(1, "releasing idle DMA channel %p\n", c);
+	else if (!c->transmit)
+		core_rxirq_enable(tibase, c->index + 1);
+
+	/* for now, leave its cppi IRQ enabled (we won't trigger it) */
+	c->hw_ep = NULL;
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_rx(int level, struct cppi_channel *c, const char *tag)
+{
+	void __iomem			*base = c->controller->mregs;
+	struct cppi_rx_stateram __iomem	*rx = c->state_ram;
+
+	musb_ep_select(base, c->index + 1);
+
+	DBG(level, "RX DMA%d%s: %d left, csr %04x, "
+			"%08x H%08x S%08x C%08x, "
+			"B%08x L%08x %08x .. %08x"
+			"\n",
+		c->index, tag,
+		musb_readl(c->controller->tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index),
+		musb_readw(c->hw_ep->regs, MUSB_RXCSR),
+
+		musb_readl(&rx->rx_skipbytes, 0),
+		musb_readl(&rx->rx_head, 0),
+		musb_readl(&rx->rx_sop, 0),
+		musb_readl(&rx->rx_current, 0),
+
+		musb_readl(&rx->rx_buf_current, 0),
+		musb_readl(&rx->rx_len_len, 0),
+		musb_readl(&rx->rx_cnt_cnt, 0),
+		musb_readl(&rx->rx_complete, 0)
+		);
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_tx(int level, struct cppi_channel *c, const char *tag)
+{
+	void __iomem			*base = c->controller->mregs;
+	struct cppi_tx_stateram __iomem	*tx = c->state_ram;
+
+	musb_ep_select(base, c->index + 1);
+
+	DBG(level, "TX DMA%d%s: csr %04x, "
+			"H%08x S%08x C%08x %08x, "
+			"F%08x L%08x .. %08x"
+			"\n",
+		c->index, tag,
+		musb_readw(c->hw_ep->regs, MUSB_TXCSR),
+
+		musb_readl(&tx->tx_head, 0),
+		musb_readl(&tx->tx_buf, 0),
+		musb_readl(&tx->tx_current, 0),
+		musb_readl(&tx->tx_buf_current, 0),
+
+		musb_readl(&tx->tx_info, 0),
+		musb_readl(&tx->tx_rem_len, 0),
+		/* dummy/unused word 6 */
+		musb_readl(&tx->tx_complete, 0)
+		);
+}
+
+/* Context: controller irqlocked */
+static inline void
+cppi_rndis_update(struct cppi_channel *c, int is_rx,
+		void __iomem *tibase, int is_rndis)
+{
+	/* we may need to change the rndis flag for this cppi channel */
+	if (c->is_rndis != is_rndis) {
+		u32	value = musb_readl(tibase, DAVINCI_RNDIS_REG);
+		u32	temp = 1 << (c->index);
+
+		if (is_rx)
+			temp <<= 16;
+		if (is_rndis)
+			value |= temp;
+		else
+			value &= ~temp;
+		musb_writel(tibase, DAVINCI_RNDIS_REG, value);
+		c->is_rndis = is_rndis;
+	}
+}
+
+static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
+{
+	pr_debug("RXBD/%s %08x: "
+			"nxt %08x buf %08x off.blen %08x opt.plen %08x\n",
+			tag, bd->dma,
+			bd->hw_next, bd->hw_bufp, bd->hw_off_len,
+			bd->hw_options);
+}
+
+static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
+{
+#if MUSB_DEBUG > 0
+	struct cppi_descriptor	*bd;
+
+	if (!_dbg_level(level))
+		return;
+	cppi_dump_rx(level, rx, tag);
+	if (rx->last_processed)
+		cppi_dump_rxbd("last", rx->last_processed);
+	for (bd = rx->head; bd; bd = bd->next)
+		cppi_dump_rxbd("active", bd);
+#endif
+}
+
+
+/* NOTE:  DaVinci autoreq is ignored except for host side "RNDIS" mode RX;
+ * so we won't ever use it (see "CPPI RX Woes" below).
+ */
+static inline int cppi_autoreq_update(struct cppi_channel *rx,
+		void __iomem *tibase, int onepacket, unsigned n_bds)
+{
+	u32	val;
+
+#ifdef	RNDIS_RX_IS_USABLE
+	u32	tmp;
+	/* assert(is_host_active(musb)) */
+
+	/* start from "AutoReq never" */
+	tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+	val = tmp & ~((0x3) << (rx->index * 2));
+
+	/* HCD arranged reqpkt for packet #1.  we arrange int
+	 * for all but the last one, maybe in two segments.
+	 */
+	if (!onepacket) {
+#if 0
+		/* use two segments, autoreq "all" then the last "never" */
+		val |= ((0x3) << (rx->index * 2));
+		n_bds--;
+#else
+		/* one segment, autoreq "all-but-last" */
+		val |= ((0x1) << (rx->index * 2));
+#endif
+	}
+
+	if (val != tmp) {
+		int n = 100;
+
+		/* make sure that autoreq is updated before continuing */
+		musb_writel(tibase, DAVINCI_AUTOREQ_REG, val);
+		do {
+			tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+			if (tmp == val)
+				break;
+			cpu_relax();
+		} while (n-- > 0);
+	}
+#endif
+
+	/* REQPKT is turned off after each segment */
+	if (n_bds && rx->channel.actual_len) {
+		void __iomem	*regs = rx->hw_ep->regs;
+
+		val = musb_readw(regs, MUSB_RXCSR);
+		if (!(val & MUSB_RXCSR_H_REQPKT)) {
+			val |= MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_H_WZC_BITS;
+			musb_writew(regs, MUSB_RXCSR, val);
+			/* flush writebufer */
+			val = musb_readw(regs, MUSB_RXCSR);
+		}
+	}
+	return n_bds;
+}
+
+
+/* Buffer enqueuing Logic:
+ *
+ *  - RX builds new queues each time, to help handle routine "early
+ *    termination" cases (faults, including errors and short reads)
+ *    more correctly.
+ *
+ *  - for now, TX reuses the same queue of BDs every time
+ *
+ * REVISIT long term, we want a normal dynamic model.
+ * ... the goal will be to append to the
+ * existing queue, processing completed "dma buffers" (segments) on the fly.
+ *
+ * Otherwise we force an IRQ latency between requests, which slows us a lot
+ * (especially in "transparent" dma).  Unfortunately that model seems to be
+ * inherent in the DMA model from the Mentor code, except in the rare case
+ * of transfers big enough (~128+ KB) that we could append "middle" segments
+ * in the TX paths.  (RX can't do this, see below.)
+ *
+ * That's true even in the CPPI- friendly iso case, where most urbs have
+ * several small segments provided in a group and where the "packet at a time"
+ * "transparent" DMA model is always correct, even on the RX side.
+ */
+
+/*
+ * CPPI TX:
+ * ========
+ * TX is a lot more reasonable than RX; it doesn't need to run in
+ * irq-per-packet mode very often.  RNDIS mode seems to behave too
+ * (except how it handles the exactly-N-packets case).  Building a
+ * txdma queue with multiple requests (urb or usb_request) looks
+ * like it would work ... but fault handling would need much testing.
+ *
+ * The main issue with TX mode RNDIS relates to transfer lengths that
+ * are an exact multiple of the packet length.  It appears that there's
+ * a hiccup in that case (maybe the DMA completes before the ZLP gets
+ * written?) boiling down to not being able to rely on CPPI writing any
+ * terminating zero length packet before the next transfer is written.
+ * So that's punted to PIO; better yet, gadget drivers can avoid it.
+ *
+ * Plus, there's allegedly an undocumented constraint that rndis transfer
+ * length be a multiple of 64 bytes ... but the chip doesn't act that
+ * way, and we really don't _want_ that behavior anyway.
+ *
+ * On TX, "transparent" mode works ... although experiments have shown
+ * problems trying to use the SOP/EOP bits in different USB packets.
+ *
+ * REVISIT try to handle terminating zero length packets using CPPI
+ * instead of doing it by PIO after an IRQ.  (Meanwhile, make Ethernet
+ * links avoid that issue by forcing them to avoid zlps.)
+ */
+static void
+cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
+{
+	unsigned		maxpacket = tx->maxpacket;
+	dma_addr_t		addr = tx->buf_dma + tx->offset;
+	size_t			length = tx->buf_len - tx->offset;
+	struct cppi_descriptor	*bd;
+	unsigned		n_bds;
+	unsigned		i;
+	struct cppi_tx_stateram	__iomem *tx_ram = tx->state_ram;
+	int			rndis;
+
+	/* TX can use the CPPI "rndis" mode, where we can probably fit this
+	 * transfer in one BD and one IRQ.  The only time we would NOT want
+	 * to use it is when hardware constraints prevent it, or if we'd
+	 * trigger the "send a ZLP?" confusion.
+	 */
+	rndis = (maxpacket & 0x3f) == 0
+		&& length < 0xffff
+		&& (length % maxpacket) != 0;
+
+	if (rndis) {
+		maxpacket = length;
+		n_bds = 1;
+	} else {
+		n_bds = length / maxpacket;
+		if (!length || (length % maxpacket))
+			n_bds++;
+		n_bds = min(n_bds, (unsigned) NUM_TXCHAN_BD);
+		length = min(n_bds * maxpacket, length);
+	}
+
+	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n",
+			tx->index,
+			maxpacket,
+			rndis ? "rndis" : "transparent",
+			n_bds,
+			addr, length);
+
+	cppi_rndis_update(tx, 0, musb->ctrl_base, rndis);
+
+	/* assuming here that channel_program is called during
+	 * transfer initiation ... current code maintains state
+	 * for one outstanding request only (no queues, not even
+	 * the implicit ones of an iso urb).
+	 */
+
+	bd = tx->freelist;
+	tx->head = bd;
+	tx->last_processed = NULL;
+
+	/* FIXME use BD pool like RX side does, and just queue
+	 * the minimum number for this request.
+	 */
+
+	/* Prepare queue of BDs first, then hand it to hardware.
+	 * All BDs except maybe the last should be of full packet
+	 * size; for RNDIS there _is_ only that last packet.
+	 */
+	for (i = 0; i < n_bds; ) {
+		if (++i < n_bds && bd->next)
+			bd->hw_next = bd->next->dma;
+		else
+			bd->hw_next = 0;
+
+		bd->hw_bufp = tx->buf_dma + tx->offset;
+
+		/* FIXME set EOP only on the last packet,
+		 * SOP only on the first ... avoid IRQs
+		 */
+		if ((tx->offset + maxpacket) <= tx->buf_len) {
+			tx->offset += maxpacket;
+			bd->hw_off_len = maxpacket;
+			bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+				| CPPI_OWN_SET | maxpacket;
+		} else {
+			/* only this one may be a partial USB Packet */
+			u32		partial_len;
+
+			partial_len = tx->buf_len - tx->offset;
+			tx->offset = tx->buf_len;
+			bd->hw_off_len = partial_len;
+
+			bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+				| CPPI_OWN_SET | partial_len;
+			if (partial_len == 0)
+				bd->hw_options |= CPPI_ZERO_SET;
+		}
+
+		DBG(5, "TXBD %p: nxt %08x buf %08x len %04x opt %08x\n",
+				bd, bd->hw_next, bd->hw_bufp,
+				bd->hw_off_len, bd->hw_options);
+
+		/* update the last BD enqueued to the list */
+		tx->tail = bd;
+		bd = bd->next;
+	}
+
+	/* BDs live in DMA-coherent memory, but writes might be pending */
+	cpu_drain_writebuffer();
+
+	/* Write to the HeadPtr in state RAM to trigger */
+	musb_writel(&tx_ram->tx_head, 0, (u32)tx->freelist->dma);
+
+	cppi_dump_tx(5, tx, "/S");
+}
+
+/*
+ * CPPI RX Woes:
+ * =============
+ * Consider a 1KB bulk RX buffer in two scenarios:  (a) it's fed two 300 byte
+ * packets back-to-back, and (b) it's fed two 512 byte packets back-to-back.
+ * (Full speed transfers have similar scenarios.)
+ *
+ * The correct behavior for Linux is that (a) fills the buffer with 300 bytes,
+ * and the next packet goes into a buffer that's queued later; while (b) fills
+ * the buffer with 1024 bytes.  How to do that with CPPI?
+ *
+ * - RX queues in "rndis" mode -- one single BD -- handle (a) correctly, but
+ *   (b) loses **BADLY** because nothing (!) happens when that second packet
+ *   fills the buffer, much less when a third one arrives.  (Which makes this
+ *   not a "true" RNDIS mode.  In the RNDIS protocol short-packet termination
+ *   is optional, and it's fine if peripherals -- not hosts! -- pad messages
+ *   out to end-of-buffer.  Standard PCI host controller DMA descriptors
+ *   implement that mode by default ... which is no accident.)
+ *
+ * - RX queues in "transparent" mode -- two BDs with 512 bytes each -- have
+ *   converse problems:  (b) is handled right, but (a) loses badly.  CPPI RX
+ *   ignores SOP/EOP markings and processes both of those BDs; so both packets
+ *   are loaded into the buffer (with a 212 byte gap between them), and the next
+ *   buffer queued will NOT get its 300 bytes of data. (It seems like SOP/EOP
+ *   are intended as outputs for RX queues, not inputs...)
+ *
+ * - A variant of "transparent" mode -- one BD at a time -- is the only way to
+ *   reliably make both cases work, with software handling both cases correctly
+ *   and at the significant penalty of needing an IRQ per packet.  (The lack of
+ *   I/O overlap can be slightly ameliorated by enabling double buffering.)
+ *
+ * So how to get rid of IRQ-per-packet?  The transparent multi-BD case could
+ * be used in special cases like mass storage, which sets URB_SHORT_NOT_OK
+ * (or maybe its peripheral side counterpart) to flag (a) scenarios as errors
+ * with guaranteed driver level fault recovery and scrubbing out what's left
+ * of that garbaged datastream.
+ *
+ * But there seems to be no way to identify the cases where CPPI RNDIS mode
+ * is appropriate -- which do NOT include RNDIS host drivers, but do include
+ * the CDC Ethernet driver! -- and the documentation is incomplete/wrong.
+ * So we can't _ever_ use RX RNDIS mode ... except by using a heuristic
+ * that applies best on the peripheral side (and which could fail rudely).
+ *
+ * Leaving only "transparent" mode; we avoid multi-bd modes in almost all
+ * cases other than mass storage class.  Otherwise we're correct but slow,
+ * since CPPI penalizes our need for a "true RNDIS" default mode.
+ */
+
+
+/* Heuristic, intended to kick in for ethernet/rndis peripheral ONLY
+ *
+ * IFF
+ *  (a)	peripheral mode ... since rndis peripherals could pad their
+ *	writes to hosts, causing i/o failure; or we'd have to cope with
+ *	a largely unknowable variety of host side protocol variants
+ *  (b)	and short reads are NOT errors ... since full reads would
+ *	cause those same i/o failures
+ *  (c)	and read length is
+ *	- less than 64KB (max per cppi descriptor)
+ *	- not a multiple of 4096 (g_zero default, full reads typical)
+ *	- N (>1) packets long, ditto (full reads not EXPECTED)
+ * THEN
+ *   try rx rndis mode
+ *
+ * Cost of heuristic failing:  RXDMA wedges at the end of transfers that
+ * fill out the whole buffer.  Buggy host side usb network drivers could
+ * trigger that, but "in the field" such bugs seem to be all but unknown.
+ *
+ * So this module parameter lets the heuristic be disabled.  When using
+ * gadgetfs, the heuristic will probably need to be disabled.
+ */
+static int cppi_rx_rndis = 1;
+
+module_param(cppi_rx_rndis, bool, 0);
+MODULE_PARM_DESC(cppi_rx_rndis, "enable/disable RX RNDIS heuristic");
+
+
+/**
+ * cppi_next_rx_segment - dma read for the next chunk of a buffer
+ * @musb: the controller
+ * @rx: dma channel
+ * @onepacket: true unless caller treats short reads as errors, and
+ *	performs fault recovery above usbcore.
+ * Context: controller irqlocked
+ *
+ * See above notes about why we can't use multi-BD RX queues except in
+ * rare cases (mass storage class), and can never use the hardware "rndis"
+ * mode (since it's not a "true" RNDIS mode) with complete safety..
+ *
+ * It's ESSENTIAL that callers specify "onepacket" mode unless they kick in
+ * code to recover from corrupted datastreams after each short transfer.
+ */
+static void
+cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
+{
+	unsigned		maxpacket = rx->maxpacket;
+	dma_addr_t		addr = rx->buf_dma + rx->offset;
+	size_t			length = rx->buf_len - rx->offset;
+	struct cppi_descriptor	*bd, *tail;
+	unsigned		n_bds;
+	unsigned		i;
+	void __iomem		*tibase = musb->ctrl_base;
+	int			is_rndis = 0;
+	struct cppi_rx_stateram	__iomem *rx_ram = rx->state_ram;
+
+	if (onepacket) {
+		/* almost every USB driver, host or peripheral side */
+		n_bds = 1;
+
+		/* maybe apply the heuristic above */
+		if (cppi_rx_rndis
+				&& is_peripheral_active(musb)
+				&& length > maxpacket
+				&& (length & ~0xffff) == 0
+				&& (length & 0x0fff) != 0
+				&& (length & (maxpacket - 1)) == 0) {
+			maxpacket = length;
+			is_rndis = 1;
+		}
+	} else {
+		/* virtually nothing except mass storage class */
+		if (length > 0xffff) {
+			n_bds = 0xffff / maxpacket;
+			length = n_bds * maxpacket;
+		} else {
+			n_bds = length / maxpacket;
+			if (length % maxpacket)
+				n_bds++;
+		}
+		if (n_bds == 1)
+			onepacket = 1;
+		else
+			n_bds = min(n_bds, (unsigned) NUM_RXCHAN_BD);
+	}
+
+	/* In host mode, autorequest logic can generate some IN tokens; it's
+	 * tricky since we can't leave REQPKT set in RXCSR after the transfer
+	 * finishes. So:  multipacket transfers involve two or more segments.
+	 * And always at least two IRQs ... RNDIS mode is not an option.
+	 */
+	if (is_host_active(musb))
+		n_bds = cppi_autoreq_update(rx, tibase, onepacket, n_bds);
+
+	cppi_rndis_update(rx, 1, musb->ctrl_base, is_rndis);
+
+	length = min(n_bds * maxpacket, length);
+
+	DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
+			"dma 0x%x len %u %u/%u\n",
+			rx->index, maxpacket,
+			onepacket
+				? (is_rndis ? "rndis" : "onepacket")
+				: "multipacket",
+			n_bds,
+			musb_readl(tibase,
+				DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+					& 0xffff,
+			addr, length, rx->channel.actual_len, rx->buf_len);
+
+	/* only queue one segment at a time, since the hardware prevents
+	 * correct queue shutdown after unexpected short packets
+	 */
+	bd = cppi_bd_alloc(rx);
+	rx->head = bd;
+
+	/* Build BDs for all packets in this segment */
+	for (i = 0, tail = NULL; bd && i < n_bds; i++, tail = bd) {
+		u32	bd_len;
+
+		if (i) {
+			bd = cppi_bd_alloc(rx);
+			if (!bd)
+				break;
+			tail->next = bd;
+			tail->hw_next = bd->dma;
+		}
+		bd->hw_next = 0;
+
+		/* all but the last packet will be maxpacket size */
+		if (maxpacket < length)
+			bd_len = maxpacket;
+		else
+			bd_len = length;
+
+		bd->hw_bufp = addr;
+		addr += bd_len;
+		rx->offset += bd_len;
+
+		bd->hw_off_len = (0 /*offset*/ << 16) + bd_len;
+		bd->buflen = bd_len;
+
+		bd->hw_options = CPPI_OWN_SET | (i == 0 ? length : 0);
+		length -= bd_len;
+	}
+
+	/* we always expect at least one reusable BD! */
+	if (!tail) {
+		WARNING("rx dma%d -- no BDs? need %d\n", rx->index, n_bds);
+		return;
+	} else if (i < n_bds)
+		WARNING("rx dma%d -- only %d of %d BDs\n", rx->index, i, n_bds);
+
+	tail->next = NULL;
+	tail->hw_next = 0;
+
+	bd = rx->head;
+	rx->tail = tail;
+
+	/* short reads and other faults should terminate this entire
+	 * dma segment.  we want one "dma packet" per dma segment, not
+	 * one per USB packet, terminating the whole queue at once...
+	 * NOTE that current hardware seems to ignore SOP and EOP.
+	 */
+	bd->hw_options |= CPPI_SOP_SET;
+	tail->hw_options |= CPPI_EOP_SET;
+
+	if (debug >= 5) {
+		struct cppi_descriptor	*d;
+
+		for (d = rx->head; d; d = d->next)
+			cppi_dump_rxbd("S", d);
+	}
+
+	/* in case the preceding transfer left some state... */
+	tail = rx->last_processed;
+	if (tail) {
+		tail->next = bd;
+		tail->hw_next = bd->dma;
+	}
+
+	core_rxirq_enable(tibase, rx->index + 1);
+
+	/* BDs live in DMA-coherent memory, but writes might be pending */
+	cpu_drain_writebuffer();
+
+	/* REVISIT specs say to write this AFTER the BUFCNT register
+	 * below ... but that loses badly.
+	 */
+	musb_writel(&rx_ram->rx_head, 0, bd->dma);
+
+	/* bufferCount must be at least 3, and zeroes on completion
+	 * unless it underflows below zero, or stops at two, or keeps
+	 * growing ... grr.
+	 */
+	i = musb_readl(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+			& 0xffff;
+
+	if (!i)
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds + 2);
+	else if (n_bds > (i - 3))
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds - (i - 3));
+
+	i = musb_readl(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+			& 0xffff;
+	if (i < (2 + n_bds)) {
+		DBG(2, "bufcnt%d underrun - %d (for %d)\n",
+					rx->index, i, n_bds);
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds + 2);
+	}
+
+	cppi_dump_rx(4, rx, "/S");
+}
+
+/**
+ * cppi_channel_program - program channel for data transfer
+ * @ch: the channel
+ * @maxpacket: max packet size
+ * @mode: For RX, 1 unless the usb protocol driver promised to treat
+ *	all short reads as errors and kick in high level fault recovery.
+ *	For TX, ignored because of RNDIS mode races/glitches.
+ * @dma_addr: dma address of buffer
+ * @len: length of buffer
+ * Context: controller irqlocked
+ */
+static int cppi_channel_program(struct dma_channel *ch,
+		u16 maxpacket, u8 mode,
+		dma_addr_t dma_addr, u32 len)
+{
+	struct cppi_channel	*cppi_ch;
+	struct cppi		*controller;
+	struct musb		*musb;
+
+	cppi_ch = container_of(ch, struct cppi_channel, channel);
+	controller = cppi_ch->controller;
+	musb = controller->musb;
+
+	switch (ch->status) {
+	case MUSB_DMA_STATUS_BUS_ABORT:
+	case MUSB_DMA_STATUS_CORE_ABORT:
+		/* fault irq handler should have handled cleanup */
+		WARNING("%cX DMA%d not cleaned up after abort!\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* WARN_ON(1); */
+		break;
+	case MUSB_DMA_STATUS_BUSY:
+		WARNING("program active channel?  %cX DMA%d\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* WARN_ON(1); */
+		break;
+	case MUSB_DMA_STATUS_UNKNOWN:
+		DBG(1, "%cX DMA%d not allocated!\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* FALLTHROUGH */
+	case MUSB_DMA_STATUS_FREE:
+		break;
+	}
+
+	ch->status = MUSB_DMA_STATUS_BUSY;
+
+	/* set transfer parameters, then queue up its first segment */
+	cppi_ch->buf_dma = dma_addr;
+	cppi_ch->offset = 0;
+	cppi_ch->maxpacket = maxpacket;
+	cppi_ch->buf_len = len;
+
+	/* TX channel? or RX? */
+	if (cppi_ch->transmit)
+		cppi_next_tx_segment(musb, cppi_ch);
+	else
+		cppi_next_rx_segment(musb, cppi_ch, mode);
+
+	return true;
+}
+
+static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
+{
+	struct cppi_channel		*rx = &cppi->rx[ch];
+	struct cppi_rx_stateram __iomem	*state = rx->state_ram;
+	struct cppi_descriptor		*bd;
+	struct cppi_descriptor		*last = rx->last_processed;
+	bool				completed = false;
+	bool				acked = false;
+	int				i;
+	dma_addr_t			safe2ack;
+	void __iomem			*regs = rx->hw_ep->regs;
+
+	cppi_dump_rx(6, rx, "/K");
+
+	bd = last ? last->next : rx->head;
+	if (!bd)
+		return false;
+
+	/* run through all completed BDs */
+	for (i = 0, safe2ack = musb_readl(&state->rx_complete, 0);
+			(safe2ack || completed) && bd && i < NUM_RXCHAN_BD;
+			i++, bd = bd->next) {
+		u16	len;
+
+		/* catch latest BD writes from CPPI */
+		rmb();
+		if (!completed && (bd->hw_options & CPPI_OWN_SET))
+			break;
+
+		DBG(5, "C/RXBD %08x: nxt %08x buf %08x "
+			"off.len %08x opt.len %08x (%d)\n",
+			bd->dma, bd->hw_next, bd->hw_bufp,
+			bd->hw_off_len, bd->hw_options,
+			rx->channel.actual_len);
+
+		/* actual packet received length */
+		if ((bd->hw_options & CPPI_SOP_SET) && !completed)
+			len = bd->hw_off_len & CPPI_RECV_PKTLEN_MASK;
+		else
+			len = 0;
+
+		if (bd->hw_options & CPPI_EOQ_MASK)
+			completed = true;
+
+		if (!completed && len < bd->buflen) {
+			/* NOTE:  when we get a short packet, RXCSR_H_REQPKT
+			 * must have been cleared, and no more DMA packets may
+			 * active be in the queue... TI docs didn't say, but
+			 * CPPI ignores those BDs even though OWN is still set.
+			 */
+			completed = true;
+			DBG(3, "rx short %d/%d (%d)\n",
+					len, bd->buflen,
+					rx->channel.actual_len);
+		}
+
+		/* If we got here, we expect to ack at least one BD; meanwhile
+		 * CPPI may completing other BDs while we scan this list...
+		 *
+		 * RACE: we can notice OWN cleared before CPPI raises the
+		 * matching irq by writing that BD as the completion pointer.
+		 * In such cases, stop scanning and wait for the irq, avoiding
+		 * lost acks and states where BD ownership is unclear.
+		 */
+		if (bd->dma == safe2ack) {
+			musb_writel(&state->rx_complete, 0, safe2ack);
+			safe2ack = musb_readl(&state->rx_complete, 0);
+			acked = true;
+			if (bd->dma == safe2ack)
+				safe2ack = 0;
+		}
+
+		rx->channel.actual_len += len;
+
+		cppi_bd_free(rx, last);
+		last = bd;
+
+		/* stop scanning on end-of-segment */
+		if (bd->hw_next == 0)
+			completed = true;
+	}
+	rx->last_processed = last;
+
+	/* dma abort, lost ack, or ... */
+	if (!acked && last) {
+		int	csr;
+
+		if (safe2ack == 0 || safe2ack == rx->last_processed->dma)
+			musb_writel(&state->rx_complete, 0, safe2ack);
+		if (safe2ack == 0) {
+			cppi_bd_free(rx, last);
+			rx->last_processed = NULL;
+
+			/* if we land here on the host side, H_REQPKT will
+			 * be clear and we need to restart the queue...
+			 */
+			WARN_ON(rx->head);
+		}
+		musb_ep_select(cppi->mregs, rx->index + 1);
+		csr = musb_readw(regs, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_DMAENAB) {
+			DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n",
+				rx->index,
+				rx->head, rx->tail,
+				rx->last_processed
+					? rx->last_processed->dma
+					: 0,
+				completed ? ", completed" : "",
+				csr);
+			cppi_dump_rxq(4, "/what?", rx);
+		}
+	}
+	if (!completed) {
+		int	csr;
+
+		rx->head = bd;
+
+		/* REVISIT seems like "autoreq all but EOP" doesn't...
+		 * setting it here "should" be racey, but seems to work
+		 */
+		csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+		if (is_host_active(cppi->musb)
+				&& bd
+				&& !(csr & MUSB_RXCSR_H_REQPKT)) {
+			csr |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(regs, MUSB_RXCSR,
+					MUSB_RXCSR_H_WZC_BITS | csr);
+			csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+		}
+	} else {
+		rx->head = NULL;
+		rx->tail = NULL;
+	}
+
+	cppi_dump_rx(6, rx, completed ? "/completed" : "/cleaned");
+	return completed;
+}
+
+void cppi_completion(struct musb *musb, u32 rx, u32 tx)
+{
+	void __iomem		*tibase;
+	int			i, index;
+	struct cppi		*cppi;
+	struct musb_hw_ep	*hw_ep = NULL;
+
+	cppi = container_of(musb->dma_controller, struct cppi, controller);
+
+	tibase = musb->ctrl_base;
+
+	/* process TX channels */
+	for (index = 0; tx; tx = tx >> 1, index++) {
+		struct cppi_channel		*tx_ch;
+		struct cppi_tx_stateram __iomem	*tx_ram;
+		bool				completed = false;
+		struct cppi_descriptor		*bd;
+
+		if (!(tx & 1))
+			continue;
+
+		tx_ch = cppi->tx + index;
+		tx_ram = tx_ch->state_ram;
+
+		/* FIXME  need a cppi_tx_scan() routine, which
+		 * can also be called from abort code
+		 */
+
+		cppi_dump_tx(5, tx_ch, "/E");
+
+		bd = tx_ch->head;
+
+		if (NULL == bd) {
+			DBG(1, "null BD\n");
+			continue;
+		}
+
+		/* run through all completed BDs */
+		for (i = 0; !completed && bd && i < NUM_TXCHAN_BD;
+				i++, bd = bd->next) {
+			u16	len;
+
+			/* catch latest BD writes from CPPI */
+			rmb();
+			if (bd->hw_options & CPPI_OWN_SET)
+				break;
+
+			DBG(5, "C/TXBD %p n %x b %x off %x opt %x\n",
+					bd, bd->hw_next, bd->hw_bufp,
+					bd->hw_off_len, bd->hw_options);
+
+			len = bd->hw_off_len & CPPI_BUFFER_LEN_MASK;
+			tx_ch->channel.actual_len += len;
+
+			tx_ch->last_processed = bd;
+
+			/* write completion register to acknowledge
+			 * processing of completed BDs, and possibly
+			 * release the IRQ; EOQ might not be set ...
+			 *
+			 * REVISIT use the same ack strategy as rx
+			 *
+			 * REVISIT have observed bit 18 set; huh??
+			 */
+			/* if ((bd->hw_options & CPPI_EOQ_MASK)) */
+				musb_writel(&tx_ram->tx_complete, 0, bd->dma);
+
+			/* stop scanning on end-of-segment */
+			if (bd->hw_next == 0)
+				completed = true;
+		}
+
+		/* on end of segment, maybe go to next one */
+		if (completed) {
+			/* cppi_dump_tx(4, tx_ch, "/complete"); */
+
+			/* transfer more, or report completion */
+			if (tx_ch->offset >= tx_ch->buf_len) {
+				tx_ch->head = NULL;
+				tx_ch->tail = NULL;
+				tx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+				hw_ep = tx_ch->hw_ep;
+
+				/* Peripheral role never repurposes the
+				 * endpoint, so immediate completion is
+				 * safe.  Host role waits for the fifo
+				 * to empty (TXPKTRDY irq) before going
+				 * to the next queued bulk transfer.
+				 */
+				if (is_host_active(cppi->musb)) {
+#if 0
+					/* WORKAROUND because we may
+					 * not always get TXKPTRDY ...
+					 */
+					int	csr;
+
+					csr = musb_readw(hw_ep->regs,
+						MUSB_TXCSR);
+					if (csr & MUSB_TXCSR_TXPKTRDY)
+#endif
+						completed = false;
+				}
+				if (completed)
+					musb_dma_completion(musb, index + 1, 1);
+
+			} else {
+				/* Bigger transfer than we could fit in
+				 * that first batch of descriptors...
+				 */
+				cppi_next_tx_segment(musb, tx_ch);
+			}
+		} else
+			tx_ch->head = bd;
+	}
+
+	/* Start processing the RX block */
+	for (index = 0; rx; rx = rx >> 1, index++) {
+
+		if (rx & 1) {
+			struct cppi_channel		*rx_ch;
+
+			rx_ch = cppi->rx + index;
+
+			/* let incomplete dma segments finish */
+			if (!cppi_rx_scan(cppi, index))
+				continue;
+
+			/* start another dma segment if needed */
+			if (rx_ch->channel.actual_len != rx_ch->buf_len
+					&& rx_ch->channel.actual_len
+						== rx_ch->offset) {
+				cppi_next_rx_segment(musb, rx_ch, 1);
+				continue;
+			}
+
+			/* all segments completed! */
+			rx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+			hw_ep = rx_ch->hw_ep;
+
+			core_rxirq_disable(tibase, index + 1);
+			musb_dma_completion(musb, index + 1, 0);
+		}
+	}
+
+	/* write to CPPI EOI register to re-enable interrupts */
+	musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+}
+
+/* Instantiate a software object representing a DMA controller. */
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *mregs)
+{
+	struct cppi		*controller;
+
+	controller = kzalloc(sizeof *controller, GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	controller->mregs = mregs;
+	controller->tibase = mregs - DAVINCI_BASE_OFFSET;
+
+	controller->musb = musb;
+	controller->controller.start = cppi_controller_start;
+	controller->controller.stop = cppi_controller_stop;
+	controller->controller.channel_alloc = cppi_channel_allocate;
+	controller->controller.channel_release = cppi_channel_release;
+	controller->controller.channel_program = cppi_channel_program;
+	controller->controller.channel_abort = cppi_channel_abort;
+
+	/* NOTE: allocating from on-chip SRAM would give the least
+	 * contention for memory access, if that ever matters here.
+	 */
+
+	/* setup BufferPool */
+	controller->pool = dma_pool_create("cppi",
+			controller->musb->controller,
+			sizeof(struct cppi_descriptor),
+			CPPI_DESCRIPTOR_ALIGN, 0);
+	if (!controller->pool) {
+		kfree(controller);
+		return NULL;
+	}
+
+	return &controller->controller;
+}
+
+/*
+ *  Destroy a previously-instantiated DMA controller.
+ */
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct cppi	*cppi;
+
+	cppi = container_of(c, struct cppi, controller);
+
+	/* assert:  caller stopped the controller first */
+	dma_pool_destroy(cppi->pool);
+
+	kfree(cppi);
+}
+
+/*
+ * Context: controller irqlocked, endpoint selected
+ */
+static int cppi_channel_abort(struct dma_channel *channel)
+{
+	struct cppi_channel	*cppi_ch;
+	struct cppi		*controller;
+	void __iomem		*mbase;
+	void __iomem		*tibase;
+	void __iomem		*regs;
+	u32			value;
+	struct cppi_descriptor	*queue;
+
+	cppi_ch = container_of(channel, struct cppi_channel, channel);
+
+	controller = cppi_ch->controller;
+
+	switch (channel->status) {
+	case MUSB_DMA_STATUS_BUS_ABORT:
+	case MUSB_DMA_STATUS_CORE_ABORT:
+		/* from RX or TX fault irq handler */
+	case MUSB_DMA_STATUS_BUSY:
+		/* the hardware needs shutting down */
+		regs = cppi_ch->hw_ep->regs;
+		break;
+	case MUSB_DMA_STATUS_UNKNOWN:
+	case MUSB_DMA_STATUS_FREE:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	if (!cppi_ch->transmit && cppi_ch->head)
+		cppi_dump_rxq(3, "/abort", cppi_ch);
+
+	mbase = controller->mregs;
+	tibase = controller->tibase;
+
+	queue = cppi_ch->head;
+	cppi_ch->head = NULL;
+	cppi_ch->tail = NULL;
+
+	/* REVISIT should rely on caller having done this,
+	 * and caller should rely on us not changing it.
+	 * peripheral code is safe ... check host too.
+	 */
+	musb_ep_select(mbase, cppi_ch->index + 1);
+
+	if (cppi_ch->transmit) {
+		struct cppi_tx_stateram __iomem *tx_ram;
+		int			enabled;
+
+		/* mask interrupts raised to signal teardown complete.  */
+		enabled = musb_readl(tibase, DAVINCI_TXCPPI_INTENAB_REG)
+				& (1 << cppi_ch->index);
+		if (enabled)
+			musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+					(1 << cppi_ch->index));
+
+		/* REVISIT put timeouts on these controller handshakes */
+
+		cppi_dump_tx(6, cppi_ch, " (teardown)");
+
+		/* teardown DMA engine then usb core */
+		do {
+			value = musb_readl(tibase, DAVINCI_TXCPPI_TEAR_REG);
+		} while (!(value & CPPI_TEAR_READY));
+		musb_writel(tibase, DAVINCI_TXCPPI_TEAR_REG, cppi_ch->index);
+
+		tx_ram = cppi_ch->state_ram;
+		do {
+			value = musb_readl(&tx_ram->tx_complete, 0);
+		} while (0xFFFFFFFC != value);
+		musb_writel(&tx_ram->tx_complete, 0, 0xFFFFFFFC);
+
+		/* FIXME clean up the transfer state ... here?
+		 * the completion routine should get called with
+		 * an appropriate status code.
+		 */
+
+		value = musb_readw(regs, MUSB_TXCSR);
+		value &= ~MUSB_TXCSR_DMAENAB;
+		value |= MUSB_TXCSR_FLUSHFIFO;
+		musb_writew(regs, MUSB_TXCSR, value);
+		musb_writew(regs, MUSB_TXCSR, value);
+
+		/* re-enable interrupt */
+		if (enabled)
+			musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+					(1 << cppi_ch->index));
+
+		/* While we scrub the TX state RAM, ensure that we clean
+		 * up any interrupt that's currently asserted:
+		 * 1. Write to completion Ptr value 0x1(bit 0 set)
+		 *    (write back mode)
+		 * 2. Write to completion Ptr value 0x0(bit 0 cleared)
+		 *    (compare mode)
+		 * Value written is compared(for bits 31:2) and when
+		 * equal, interrupt is deasserted.
+		 */
+		cppi_reset_tx(tx_ram, 1);
+		musb_writel(&tx_ram->tx_complete, 0, 0);
+
+		cppi_dump_tx(5, cppi_ch, " (done teardown)");
+
+		/* REVISIT tx side _should_ clean up the same way
+		 * as the RX side ... this does no cleanup at all!
+		 */
+
+	} else /* RX */ {
+		u16			csr;
+
+		/* NOTE: docs don't guarantee any of this works ...  we
+		 * expect that if the usb core stops telling the cppi core
+		 * to pull more data from it, then it'll be safe to flush
+		 * current RX DMA state iff any pending fifo transfer is done.
+		 */
+
+		core_rxirq_disable(tibase, cppi_ch->index + 1);
+
+		/* for host, ensure ReqPkt is never set again */
+		if (is_host_active(cppi_ch->controller->musb)) {
+			value = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+			value &= ~((0x3) << (cppi_ch->index * 2));
+			musb_writel(tibase, DAVINCI_AUTOREQ_REG, value);
+		}
+
+		csr = musb_readw(regs, MUSB_RXCSR);
+
+		/* for host, clear (just) ReqPkt at end of current packet(s) */
+		if (is_host_active(cppi_ch->controller->musb)) {
+			csr |= MUSB_RXCSR_H_WZC_BITS;
+			csr &= ~MUSB_RXCSR_H_REQPKT;
+		} else
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+
+		/* clear dma enable */
+		csr &= ~(MUSB_RXCSR_DMAENAB);
+		musb_writew(regs, MUSB_RXCSR, csr);
+		csr = musb_readw(regs, MUSB_RXCSR);
+
+		/* Quiesce: wait for current dma to finish (if not cleanup).
+		 * We can't use bit zero of stateram->rx_sop, since that
+		 * refers to an entire "DMA packet" not just emptying the
+		 * current fifo.  Most segments need multiple usb packets.
+		 */
+		if (channel->status == MUSB_DMA_STATUS_BUSY)
+			udelay(50);
+
+		/* scan the current list, reporting any data that was
+		 * transferred and acking any IRQ
+		 */
+		cppi_rx_scan(controller, cppi_ch->index);
+
+		/* clobber the existing state once it's idle
+		 *
+		 * NOTE:  arguably, we should also wait for all the other
+		 * RX channels to quiesce (how??) and then temporarily
+		 * disable RXCPPI_CTRL_REG ... but it seems that we can
+		 * rely on the controller restarting from state ram, with
+		 * only RXCPPI_BUFCNT state being bogus.  BUFCNT will
+		 * correct itself after the next DMA transfer though.
+		 *
+		 * REVISIT does using rndis mode change that?
+		 */
+		cppi_reset_rx(cppi_ch->state_ram);
+
+		/* next DMA request _should_ load cppi head ptr */
+
+		/* ... we don't "free" that list, only mutate it in place.  */
+		cppi_dump_rx(5, cppi_ch, " (done abort)");
+
+		/* clean up previously pending bds */
+		cppi_bd_free(cppi_ch, cppi_ch->last_processed);
+		cppi_ch->last_processed = NULL;
+
+		while (queue) {
+			struct cppi_descriptor	*tmp = queue->next;
+
+			cppi_bd_free(cppi_ch, queue);
+			queue = tmp;
+		}
+	}
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+	cppi_ch->buf_dma = 0;
+	cppi_ch->offset = 0;
+	cppi_ch->buf_len = 0;
+	cppi_ch->maxpacket = 0;
+	return 0;
+}
+
+/* TBD Queries:
+ *
+ * Power Management ... probably turn off cppi during suspend, restart;
+ * check state ram?  Clocking is presumably shared with usb core.
+ */
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
new file mode 100644
index 00000000000..fc5216b5d2c
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.h
@@ -0,0 +1,133 @@
+/* Copyright (C) 2005-2006 by Texas Instruments */
+
+#ifndef _CPPI_DMA_H_
+#define _CPPI_DMA_H_
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/dmapool.h>
+
+#include "musb_dma.h"
+#include "musb_core.h"
+
+
+/* FIXME fully isolate CPPI from DaVinci ... the "CPPI generic" registers
+ * would seem to be shared with the TUSB6020 (over VLYNQ).
+ */
+
+#include "davinci.h"
+
+
+/* CPPI RX/TX state RAM */
+
+struct cppi_tx_stateram {
+	u32 tx_head;			/* "DMA packet" head descriptor */
+	u32 tx_buf;
+	u32 tx_current;			/* current descriptor */
+	u32 tx_buf_current;
+	u32 tx_info;			/* flags, remaining buflen */
+	u32 tx_rem_len;
+	u32 tx_dummy;			/* unused */
+	u32 tx_complete;
+};
+
+struct cppi_rx_stateram {
+	u32 rx_skipbytes;
+	u32 rx_head;
+	u32 rx_sop;			/* "DMA packet" head descriptor */
+	u32 rx_current;			/* current descriptor */
+	u32 rx_buf_current;
+	u32 rx_len_len;
+	u32 rx_cnt_cnt;
+	u32 rx_complete;
+};
+
+/* hw_options bits in CPPI buffer descriptors */
+#define CPPI_SOP_SET	((u32)(1 << 31))
+#define CPPI_EOP_SET	((u32)(1 << 30))
+#define CPPI_OWN_SET	((u32)(1 << 29))	/* owned by cppi */
+#define CPPI_EOQ_MASK	((u32)(1 << 28))
+#define CPPI_ZERO_SET	((u32)(1 << 23))	/* rx saw zlp; tx issues one */
+#define CPPI_RXABT_MASK	((u32)(1 << 19))	/* need more rx buffers */
+
+#define CPPI_RECV_PKTLEN_MASK 0xFFFF
+#define CPPI_BUFFER_LEN_MASK 0xFFFF
+
+#define CPPI_TEAR_READY ((u32)(1 << 31))
+
+/* CPPI data structure definitions */
+
+#define	CPPI_DESCRIPTOR_ALIGN	16	/* bytes; 5-dec docs say 4-byte align */
+
+struct cppi_descriptor {
+	/* hardware overlay */
+	u32		hw_next;	/* next buffer descriptor Pointer */
+	u32		hw_bufp;	/* i/o buffer pointer */
+	u32		hw_off_len;	/* buffer_offset16, buffer_length16 */
+	u32		hw_options;	/* flags:  SOP, EOP etc*/
+
+	struct cppi_descriptor *next;
+	dma_addr_t	dma;		/* address of this descriptor */
+	u32		buflen;		/* for RX: original buffer length */
+} __attribute__ ((aligned(CPPI_DESCRIPTOR_ALIGN)));
+
+
+struct cppi;
+
+/* CPPI  Channel Control structure */
+struct cppi_channel {
+	struct dma_channel	channel;
+
+	/* back pointer to the DMA controller structure */
+	struct cppi		*controller;
+
+	/* which direction of which endpoint? */
+	struct musb_hw_ep	*hw_ep;
+	bool			transmit;
+	u8			index;
+
+	/* DMA modes:  RNDIS or "transparent" */
+	u8			is_rndis;
+
+	/* book keeping for current transfer request */
+	dma_addr_t		buf_dma;
+	u32			buf_len;
+	u32			maxpacket;
+	u32			offset;		/* dma requested */
+
+	void __iomem		*state_ram;	/* CPPI state */
+
+	struct cppi_descriptor	*freelist;
+
+	/* BD management fields */
+	struct cppi_descriptor	*head;
+	struct cppi_descriptor	*tail;
+	struct cppi_descriptor	*last_processed;
+
+	/* use tx_complete in host role to track endpoints waiting for
+	 * FIFONOTEMPTY to clear.
+	 */
+	struct list_head	tx_complete;
+};
+
+/* CPPI DMA controller object */
+struct cppi {
+	struct dma_controller		controller;
+	struct musb			*musb;
+	void __iomem			*mregs;		/* Mentor regs */
+	void __iomem			*tibase;	/* TI/CPPI regs */
+
+	struct cppi_channel		tx[MUSB_C_NUM_EPT - 1];
+	struct cppi_channel		rx[MUSB_C_NUM_EPR - 1];
+
+	struct dma_pool			*pool;
+
+	struct list_head		tx_complete;
+};
+
+/* irq handling hook */
+extern void cppi_completion(struct musb *, u32 rx, u32 tx);
+
+#endif				/* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
new file mode 100644
index 00000000000..75baf181a8c
--- /dev/null
+++ b/drivers/usb/musb/davinci.c
@@ -0,0 +1,462 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/memory.h>
+#include <asm/arch/gpio.h>
+#include <asm/mach-types.h>
+
+#include "musb_core.h"
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#include <asm/arch/i2c-client.h>
+#endif
+
+#include "davinci.h"
+#include "cppi_dma.h"
+
+
+/* REVISIT (PM) we should be able to keep the PHY in low power mode most
+ * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
+ * and, when in host mode, autosuspending idle root ports... PHYPLLON
+ * (overriding SUSPENDM?) then likely needs to stay off.
+ */
+
+static inline void phy_on(void)
+{
+	/* start the on-chip PHY and its PLL */
+	__raw_writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON,
+			(void __force __iomem *) IO_ADDRESS(USBPHY_CTL_PADDR));
+	while ((__raw_readl((void __force __iomem *)
+				IO_ADDRESS(USBPHY_CTL_PADDR))
+			& USBPHY_PHYCLKGD) == 0)
+		cpu_relax();
+}
+
+static inline void phy_off(void)
+{
+	/* powerdown the on-chip PHY and its oscillator */
+	__raw_writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, (void __force __iomem *)
+			IO_ADDRESS(USBPHY_CTL_PADDR));
+}
+
+static int dma_off = 1;
+
+void musb_platform_enable(struct musb *musb)
+{
+	u32	tmp, old, val;
+
+	/* workaround:  setup irqs through both register sets */
+	tmp = (musb->epmask & DAVINCI_USB_TX_ENDPTS_MASK)
+			<< DAVINCI_USB_TXINT_SHIFT;
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+	old = tmp;
+	tmp = (musb->epmask & (0xfffe & DAVINCI_USB_RX_ENDPTS_MASK))
+			<< DAVINCI_USB_RXINT_SHIFT;
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+	tmp |= old;
+
+	val = ~MUSB_INTR_SOF;
+	tmp |= ((val & 0x01ff) << DAVINCI_USB_USBINT_SHIFT);
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+
+	if (is_dma_capable() && !dma_off)
+		printk(KERN_WARNING "%s %s: dma not reactivated\n",
+				__FILE__, __func__);
+	else
+		dma_off = 0;
+
+	/* force a DRVVBUS irq so we can start polling for ID change */
+	if (is_otg_enabled(musb))
+		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+			DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT);
+}
+
+/*
+ * Disable the HDRC and flush interrupts
+ */
+void musb_platform_disable(struct musb *musb)
+{
+	/* because we don't set CTRLR.UINT, "important" to:
+	 *  - not read/write INTRUSB/INTRUSBE
+	 *  - (except during initial setup, as workaround)
+	 *  - use INTSETR/INTCLRR instead
+	 */
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_CLR_REG,
+			  DAVINCI_USB_USBINT_MASK
+			| DAVINCI_USB_TXINT_MASK
+			| DAVINCI_USB_RXINT_MASK);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_writel(musb->ctrl_base, DAVINCI_USB_EOI_REG, 0);
+
+	if (is_dma_capable() && !dma_off)
+		WARNING("dma still active\n");
+}
+
+
+/* REVISIT it's not clear whether DaVinci can support full OTG.  */
+
+static int vbus_state = -1;
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#define	portstate(stmt)		stmt
+#else
+#define	portstate(stmt)
+#endif
+
+
+/* VBUS SWITCHING IS BOARD-SPECIFIC */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#ifndef CONFIG_MACH_DAVINCI_EVM_OTG
+
+/* I2C operations are always synchronous, and require a task context.
+ * With unloaded systems, using the shared workqueue seems to suffice
+ * to satisfy the 100msec A_WAIT_VRISE timeout...
+ */
+static void evm_deferred_drvvbus(struct work_struct *ignored)
+{
+	davinci_i2c_expander_op(0x3a, USB_DRVVBUS, vbus_state);
+	vbus_state = !vbus_state;
+}
+static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
+
+#endif	/* modified board */
+#endif	/* EVM */
+
+static void davinci_source_power(struct musb *musb, int is_on, int immediate)
+{
+	if (is_on)
+		is_on = 1;
+
+	if (vbus_state == is_on)
+		return;
+	vbus_state = !is_on;		/* 0/1 vs "-1 == unknown/init" */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+	if (machine_is_davinci_evm()) {
+#ifdef CONFIG_MACH_DAVINCI_EVM_OTG
+		/* modified EVM board switching VBUS with GPIO(6) not I2C
+		 * NOTE:  PINMUX0.RGB888 (bit23) must be clear
+		 */
+		if (is_on)
+			gpio_set(GPIO(6));
+		else
+			gpio_clear(GPIO(6));
+		immediate = 1;
+#else
+		if (immediate)
+			davinci_i2c_expander_op(0x3a, USB_DRVVBUS, !is_on);
+		else
+			schedule_work(&evm_vbus_work);
+#endif
+	}
+#endif
+	if (immediate)
+		vbus_state = is_on;
+}
+
+static void davinci_set_vbus(struct musb *musb, int is_on)
+{
+	WARN_ON(is_on && is_peripheral_active(musb));
+	davinci_source_power(musb, is_on, 0);
+}
+
+
+#define	POLL_SECONDS	2
+
+static struct timer_list otg_workaround;
+
+static void otg_timer(unsigned long _musb)
+{
+	struct musb		*musb = (void *)_musb;
+	void __iomem		*mregs = musb->mregs;
+	u8			devctl;
+	unsigned long		flags;
+
+	/* We poll because DaVinci's won't expose several OTG-critical
+	* status change events (from the transceiver) otherwise.
+	 */
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
+	DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_VFALL:
+		/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
+		 * seems to mis-handle session "start" otherwise (or in our
+		 * case "recover"), in routine "VBUS was valid by the time
+		 * VBUSERR got reported during enumeration" cases.
+		 */
+		if (devctl & MUSB_DEVCTL_VBUS) {
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			break;
+		}
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+			MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!is_peripheral_enabled(musb))
+			break;
+
+		/* There's no ID-changed IRQ, so we have no good way to tell
+		 * when to switch to the A-Default state machine (by setting
+		 * the DEVCTL.SESSION flag).
+		 *
+		 * Workaround:  whenever we're in B_IDLE, try setting the
+		 * session flag every few seconds.  If it works, ID was
+		 * grounded and we're now in the A-Default state machine.
+		 *
+		 * NOTE setting the session flag is _supposed_ to trigger
+		 * SRP, but clearly it doesn't.
+		 */
+		musb_writeb(mregs, MUSB_DEVCTL,
+				devctl | MUSB_DEVCTL_SESSION);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+		else
+			musb->xceiv.state = OTG_STATE_A_IDLE;
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static irqreturn_t davinci_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE;
+	struct musb	*musb = __hci;
+	void __iomem	*tibase = musb->ctrl_base;
+	u32		tmp;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
+	 * the Mentor registers (except for setup), use the TI ones and EOI.
+	 *
+	 * Docs describe irq "vector" registers asociated with the CPPI and
+	 * USB EOI registers.  These hold a bitmask corresponding to the
+	 * current IRQ, not an irq handler address.  Would using those bits
+	 * resolve some of the races observed in this dispatch code??
+	 */
+
+	/* CPPI interrupts share the same IRQ line, but have their own
+	 * mask, state, "vector", and EOI registers.
+	 */
+	if (is_cppi_enabled()) {
+		u32 cppi_tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
+		u32 cppi_rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
+
+		if (cppi_tx || cppi_rx) {
+			DBG(4, "CPPI IRQ t%x r%x\n", cppi_tx, cppi_rx);
+			cppi_completion(musb, cppi_rx, cppi_tx);
+			retval = IRQ_HANDLED;
+		}
+	}
+
+	/* ack and handle non-CPPI interrupts */
+	tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
+	musb_writel(tibase, DAVINCI_USB_INT_SRC_CLR_REG, tmp);
+	DBG(4, "IRQ %08x\n", tmp);
+
+	musb->int_rx = (tmp & DAVINCI_USB_RXINT_MASK)
+			>> DAVINCI_USB_RXINT_SHIFT;
+	musb->int_tx = (tmp & DAVINCI_USB_TXINT_MASK)
+			>> DAVINCI_USB_TXINT_SHIFT;
+	musb->int_usb = (tmp & DAVINCI_USB_USBINT_MASK)
+			>> DAVINCI_USB_USBINT_SHIFT;
+
+	/* DRVVBUS irqs are the only proxy we have (a very poor one!) for
+	 * DaVinci's missing ID change IRQ.  We need an ID change IRQ to
+	 * switch appropriately between halves of the OTG state machine.
+	 * Managing DEVCTL.SESSION per Mentor docs requires we know its
+	 * value, but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+	 */
+	if (tmp & (DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT)) {
+		int	drvvbus = musb_readl(tibase, DAVINCI_USB_STAT_REG);
+		void __iomem *mregs = musb->mregs;
+		u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+		int	err = musb->int_usb & MUSB_INTR_VBUSERROR;
+
+		err = is_host_enabled(musb)
+				&& (musb->int_usb & MUSB_INTR_VBUSERROR);
+		if (err) {
+			/* The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"starting sessions
+			 * without waiting (on EVM, a **long** time) for VBUS
+			 * to stop registering in devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (is_host_enabled(musb) && drvvbus) {
+			musb->is_active = 1;
+			MUSB_HST_MODE(musb);
+			musb->xceiv.default_a = 1;
+			musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+			del_timer(&otg_workaround);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv.default_a = 0;
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+		}
+
+		/* NOTE:  this must complete poweron within 100 msec */
+		davinci_source_power(musb, drvvbus, 0);
+		DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				otg_state_string(musb),
+				err ? " ERROR" : "",
+				devctl);
+		retval = IRQ_HANDLED;
+	}
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		retval |= musb_interrupt(musb);
+
+	/* irq stays asserted until EOI is written */
+	musb_writel(tibase, DAVINCI_USB_EOI_REG, 0);
+
+	/* poll for ID change */
+	if (is_otg_enabled(musb)
+			&& musb->xceiv.state == OTG_STATE_B_IDLE)
+		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* REVISIT we sometimes get unhandled IRQs
+	 * (e.g. ep0).  not clear why...
+	 */
+	if (retval != IRQ_HANDLED)
+		DBG(5, "unhandled? %08x\n", tmp);
+	return IRQ_HANDLED;
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	void __iomem	*tibase = musb->ctrl_base;
+	u32		revision;
+
+	musb->mregs += DAVINCI_BASE_OFFSET;
+#if 0
+	/* REVISIT there's something odd about clocking, this
+	 * didn't appear do the job ...
+	 */
+	musb->clock = clk_get(pDevice, "usb");
+	if (IS_ERR(musb->clock))
+		return PTR_ERR(musb->clock);
+
+	status = clk_enable(musb->clock);
+	if (status < 0)
+		return -ENODEV;
+#endif
+
+	/* returns zero if e.g. not clocked */
+	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
+	if (revision == 0)
+		return -ENODEV;
+
+	if (is_host_enabled(musb))
+		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
+
+	musb->board_set_vbus = davinci_set_vbus;
+	davinci_source_power(musb, 0, 1);
+
+	/* reset the controller */
+	musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
+
+	/* start the on-chip PHY and its PLL */
+	phy_on();
+
+	msleep(5);
+
+	/* NOTE:  irqs are in mixed mode, not bypass to pure-musb */
+	pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n",
+		revision, __raw_readl((void __force __iomem *)
+				IO_ADDRESS(USBPHY_CTL_PADDR)),
+		musb_readb(tibase, DAVINCI_USB_CTRL_REG));
+
+	musb->isr = davinci_interrupt;
+	return 0;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+	if (is_host_enabled(musb))
+		del_timer_sync(&otg_workaround);
+
+	davinci_source_power(musb, 0 /*off*/, 1);
+
+	/* delay, to avoid problems with module reload */
+	if (is_host_enabled(musb) && musb->xceiv.default_a) {
+		int	maxdelay = 30;
+		u8	devctl, warn = 0;
+
+		/* if there's no peripheral connected, this can take a
+		 * long time to fall, especially on EVM with huge C133.
+		 */
+		do {
+			devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+			if (!(devctl & MUSB_DEVCTL_VBUS))
+				break;
+			if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
+				warn = devctl & MUSB_DEVCTL_VBUS;
+				DBG(1, "VBUS %d\n",
+					warn >> MUSB_DEVCTL_VBUS_SHIFT);
+			}
+			msleep(1000);
+			maxdelay--;
+		} while (maxdelay > 0);
+
+		/* in OTG mode, another host might be connected */
+		if (devctl & MUSB_DEVCTL_VBUS)
+			DBG(1, "VBUS off timeout (devctl %02x)\n", devctl);
+	}
+
+	phy_off();
+	return 0;
+}
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
new file mode 100644
index 00000000000..7fb6238e270
--- /dev/null
+++ b/drivers/usb/musb/davinci.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_HDRDF_H__
+#define __MUSB_HDRDF_H__
+
+/*
+ * DaVinci-specific definitions
+ */
+
+/* Integrated highspeed/otg PHY */
+#define	USBPHY_CTL_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define	USBPHY_PHYCLKGD		(1 << 8)
+#define	USBPHY_SESNDEN		(1 << 7)	/* v(sess_end) comparator */
+#define	USBPHY_VBDTCTEN		(1 << 6)	/* v(bus) comparator */
+#define	USBPHY_PHYPLLON		(1 << 4)	/* override pll suspend */
+#define	USBPHY_CLKO1SEL		(1 << 3)
+#define	USBPHY_OSCPDWN		(1 << 2)
+#define	USBPHY_PHYPDWN		(1 << 0)
+
+/* For now include usb OTG module registers here */
+#define DAVINCI_USB_VERSION_REG		0x00
+#define DAVINCI_USB_CTRL_REG		0x04
+#define DAVINCI_USB_STAT_REG		0x08
+#define DAVINCI_RNDIS_REG		0x10
+#define DAVINCI_AUTOREQ_REG		0x14
+#define DAVINCI_USB_INT_SOURCE_REG	0x20
+#define DAVINCI_USB_INT_SET_REG		0x24
+#define DAVINCI_USB_INT_SRC_CLR_REG	0x28
+#define DAVINCI_USB_INT_MASK_REG	0x2c
+#define DAVINCI_USB_INT_MASK_SET_REG	0x30
+#define DAVINCI_USB_INT_MASK_CLR_REG	0x34
+#define DAVINCI_USB_INT_SRC_MASKED_REG	0x38
+#define DAVINCI_USB_EOI_REG		0x3c
+#define DAVINCI_USB_EOI_INTVEC		0x40
+
+/* BEGIN CPPI-generic (?) */
+
+/* CPPI related registers */
+#define DAVINCI_TXCPPI_CTRL_REG		0x80
+#define DAVINCI_TXCPPI_TEAR_REG		0x84
+#define DAVINCI_CPPI_EOI_REG		0x88
+#define DAVINCI_CPPI_INTVEC_REG		0x8c
+#define DAVINCI_TXCPPI_MASKED_REG	0x90
+#define DAVINCI_TXCPPI_RAW_REG		0x94
+#define DAVINCI_TXCPPI_INTENAB_REG	0x98
+#define DAVINCI_TXCPPI_INTCLR_REG	0x9c
+
+#define DAVINCI_RXCPPI_CTRL_REG		0xC0
+#define DAVINCI_RXCPPI_MASKED_REG	0xD0
+#define DAVINCI_RXCPPI_RAW_REG		0xD4
+#define DAVINCI_RXCPPI_INTENAB_REG	0xD8
+#define DAVINCI_RXCPPI_INTCLR_REG	0xDC
+
+#define DAVINCI_RXCPPI_BUFCNT0_REG	0xE0
+#define DAVINCI_RXCPPI_BUFCNT1_REG	0xE4
+#define DAVINCI_RXCPPI_BUFCNT2_REG	0xE8
+#define DAVINCI_RXCPPI_BUFCNT3_REG	0xEC
+
+/* CPPI state RAM entries */
+#define DAVINCI_CPPI_STATERAM_BASE_OFFSET   0x100
+
+#define DAVINCI_TXCPPI_STATERAM_OFFSET(chnum) \
+	(DAVINCI_CPPI_STATERAM_BASE_OFFSET +       ((chnum) * 0x40))
+#define DAVINCI_RXCPPI_STATERAM_OFFSET(chnum) \
+	(DAVINCI_CPPI_STATERAM_BASE_OFFSET + 0x20 + ((chnum) * 0x40))
+
+/* CPPI masks */
+#define DAVINCI_DMA_CTRL_ENABLE		1
+#define DAVINCI_DMA_CTRL_DISABLE	0
+
+#define DAVINCI_DMA_ALL_CHANNELS_ENABLE	0xF
+#define DAVINCI_DMA_ALL_CHANNELS_DISABLE 0xF
+
+/* END CPPI-generic (?) */
+
+#define DAVINCI_USB_TX_ENDPTS_MASK	0x1f		/* ep0 + 4 tx */
+#define DAVINCI_USB_RX_ENDPTS_MASK	0x1e		/* 4 rx */
+
+#define DAVINCI_USB_USBINT_SHIFT	16
+#define DAVINCI_USB_TXINT_SHIFT		0
+#define DAVINCI_USB_RXINT_SHIFT		8
+
+#define DAVINCI_INTR_DRVVBUS		0x0100
+
+#define DAVINCI_USB_USBINT_MASK		0x01ff0000	/* 8 Mentor, DRVVBUS */
+#define DAVINCI_USB_TXINT_MASK \
+	(DAVINCI_USB_TX_ENDPTS_MASK << DAVINCI_USB_TXINT_SHIFT)
+#define DAVINCI_USB_RXINT_MASK \
+	(DAVINCI_USB_RX_ENDPTS_MASK << DAVINCI_USB_RXINT_SHIFT)
+
+#define DAVINCI_BASE_OFFSET		0x400
+
+#endif	/* __MUSB_HDRDF_H__ */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
new file mode 100644
index 00000000000..c5b8f0296fc
--- /dev/null
+++ b/drivers/usb/musb/musb_core.c
@@ -0,0 +1,2253 @@
+/*
+ * MUSB OTG driver core code
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
+ *
+ * This consists of a Host Controller Driver (HCD) and a peripheral
+ * controller driver implementing the "Gadget" API; OTG support is
+ * in the works.  These are normal Linux-USB controller drivers which
+ * use IRQs and have no dedicated thread.
+ *
+ * This version of the driver has only been used with products from
+ * Texas Instruments.  Those products integrate the Inventra logic
+ * with other DMA, IRQ, and bus modules, as well as other logic that
+ * needs to be reflected in this driver.
+ *
+ *
+ * NOTE:  the original Mentor code here was pretty much a collection
+ * of mechanisms that don't seem to have been fully integrated/working
+ * for *any* Linux kernel version.  This version aims at Linux 2.6.now,
+ * Key open issues include:
+ *
+ *  - Lack of host-side transaction scheduling, for all transfer types.
+ *    The hardware doesn't do it; instead, software must.
+ *
+ *    This is not an issue for OTG devices that don't support external
+ *    hubs, but for more "normal" USB hosts it's a user issue that the
+ *    "multipoint" support doesn't scale in the expected ways.  That
+ *    includes DaVinci EVM in a common non-OTG mode.
+ *
+ *      * Control and bulk use dedicated endpoints, and there's as
+ *        yet no mechanism to either (a) reclaim the hardware when
+ *        peripherals are NAKing, which gets complicated with bulk
+ *        endpoints, or (b) use more than a single bulk endpoint in
+ *        each direction.
+ *
+ *        RESULT:  one device may be perceived as blocking another one.
+ *
+ *      * Interrupt and isochronous will dynamically allocate endpoint
+ *        hardware, but (a) there's no record keeping for bandwidth;
+ *        (b) in the common case that few endpoints are available, there
+ *        is no mechanism to reuse endpoints to talk to multiple devices.
+ *
+ *        RESULT:  At one extreme, bandwidth can be overcommitted in
+ *        some hardware configurations, no faults will be reported.
+ *        At the other extreme, the bandwidth capabilities which do
+ *        exist tend to be severely undercommitted.  You can't yet hook
+ *        up both a keyboard and a mouse to an external USB hub.
+ */
+
+/*
+ * This gets many kinds of configuration information:
+ *	- Kconfig for everything user-configurable
+ *	- <asm/arch/hdrc_cnf.h> for SOC or family details
+ *	- platform_device for addressing, irq, and platform_data
+ *	- platform_data is mostly for board-specific informarion
+ *
+ * Most of the conditional compilation will (someday) vanish.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#ifdef	CONFIG_ARM
+#include <asm/arch/hardware.h>
+#include <asm/arch/memory.h>
+#include <asm/mach-types.h>
+#endif
+
+#include "musb_core.h"
+
+
+#ifdef CONFIG_ARCH_DAVINCI
+#include "davinci.h"
+#endif
+
+
+
+unsigned debug;
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
+
+#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
+#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
+
+#define MUSB_VERSION "6.0"
+
+#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
+
+#define MUSB_DRIVER_NAME "musb_hdrc"
+const char musb_driver_name[] = MUSB_DRIVER_NAME;
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline struct musb *dev_to_musb(struct device *dev)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* usbcore insists dev->driver_data is a "struct hcd *" */
+	return hcd_to_musb(dev_get_drvdata(dev));
+#else
+	return dev_get_drvdata(dev);
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef CONFIG_USB_TUSB6010
+/*
+ * Load an endpoint's FIFO
+ */
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	prefetch((u8 *)src);
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', hw_ep->epnum, fifo, len, src);
+
+	/* we can't assume unaligned reads work */
+	if (likely((0x01 & (unsigned long) src) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned source address */
+		if ((0x02 & (unsigned long) src) == 0) {
+			if (len >= 4) {
+				writesl(fifo, src + index, len >> 2);
+				index += len & ~0x03;
+			}
+			if (len & 0x02) {
+				musb_writew(fifo, 0, *(u16 *)&src[index]);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				writesw(fifo, src + index, len >> 1);
+				index += len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			musb_writeb(fifo, 0, src[index]);
+	} else  {
+		/* byte aligned */
+		writesb(fifo, src, len);
+	}
+}
+
+/*
+ * Unload an endpoint's FIFO
+ */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', hw_ep->epnum, fifo, len, dst);
+
+	/* we can't assume unaligned writes work */
+	if (likely((0x01 & (unsigned long) dst) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) dst) == 0) {
+			if (len >= 4) {
+				readsl(fifo, dst, len >> 2);
+				index = len & ~0x03;
+			}
+			if (len & 0x02) {
+				*(u16 *)&dst[index] = musb_readw(fifo, 0);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				readsw(fifo, dst, len >> 1);
+				index = len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			dst[index] = musb_readb(fifo, 0);
+	} else  {
+		/* byte aligned */
+		readsb(fifo, dst, len);
+	}
+}
+
+#endif	/* normal PIO */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* for high speed test mode; see USB 2.0 spec 7.1.20 */
+static const u8 musb_test_packet[53] = {
+	/* implicit SYNC then DATA0 to start */
+
+	/* JKJKJKJK x9 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* JJKKJJKK x8 */
+	0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+	/* JJJJKKKK x8 */
+	0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
+	/* JJJJJJJKKKKKKK x8 */
+	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	/* JJJJJJJK x8 */
+	0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
+	/* JKKKKKKK x10, JK */
+	0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
+
+	/* implicit CRC16 then EOP to end */
+};
+
+void musb_load_testpacket(struct musb *musb)
+{
+	void __iomem	*regs = musb->endpoints[0].regs;
+
+	musb_ep_select(musb->mregs, 0);
+	musb_write_fifo(musb->control_ep,
+			sizeof(musb_test_packet), musb_test_packet);
+	musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
+}
+
+/*-------------------------------------------------------------------------*/
+
+const char *otg_state_string(struct musb *musb)
+{
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_IDLE:		return "a_idle";
+	case OTG_STATE_A_WAIT_VRISE:	return "a_wait_vrise";
+	case OTG_STATE_A_WAIT_BCON:	return "a_wait_bcon";
+	case OTG_STATE_A_HOST:		return "a_host";
+	case OTG_STATE_A_SUSPEND:	return "a_suspend";
+	case OTG_STATE_A_PERIPHERAL:	return "a_peripheral";
+	case OTG_STATE_A_WAIT_VFALL:	return "a_wait_vfall";
+	case OTG_STATE_A_VBUS_ERR:	return "a_vbus_err";
+	case OTG_STATE_B_IDLE:		return "b_idle";
+	case OTG_STATE_B_SRP_INIT:	return "b_srp_init";
+	case OTG_STATE_B_PERIPHERAL:	return "b_peripheral";
+	case OTG_STATE_B_WAIT_ACON:	return "b_wait_acon";
+	case OTG_STATE_B_HOST:		return "b_host";
+	default:			return "UNDEFINED";
+	}
+}
+
+#ifdef	CONFIG_USB_MUSB_OTG
+
+/*
+ * See also USB_OTG_1-3.pdf 6.6.5 Timers
+ * REVISIT: Are the other timers done in the hardware?
+ */
+#define TB_ASE0_BRST		100	/* Min 3.125 ms */
+
+/*
+ * Handles OTG hnp timeouts, such as b_ase0_brst
+ */
+void musb_otg_timer_func(unsigned long data)
+{
+	struct musb	*musb = (struct musb *)data;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_WAIT_ACON:
+		DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n");
+		musb_g_disconnect(musb);
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
+		musb_hnp_stop(musb);
+		break;
+	default:
+		DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
+	}
+	musb->ignore_disconnect = 0;
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0);
+
+/*
+ * Stops the B-device HNP state. Caller must take care of locking.
+ */
+void musb_hnp_stop(struct musb *musb)
+{
+	struct usb_hcd	*hcd = musb_to_hcd(musb);
+	void __iomem	*mbase = musb->mregs;
+	u8	reg;
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_PERIPHERAL:
+	case OTG_STATE_A_WAIT_VFALL:
+	case OTG_STATE_A_WAIT_BCON:
+		DBG(1, "HNP: Switching back to A-host\n");
+		musb_g_disconnect(musb);
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_B_HOST:
+		DBG(1, "HNP: Disabling HR\n");
+		hcd->self.is_b_host = 0;
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		MUSB_DEV_MODE(musb);
+		reg = musb_readb(mbase, MUSB_POWER);
+		reg |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, reg);
+		/* REVISIT: Start SESSION_REQUEST here? */
+		break;
+	default:
+		DBG(1, "HNP: Stopping in unknown state %s\n",
+			otg_state_string(musb));
+	}
+
+	/*
+	 * When returning to A state after HNP, avoid hub_port_rebounce(),
+	 * which cause occasional OPT A "Did not receive reset after connect"
+	 * errors.
+	 */
+	musb->port1_status &=
+		~(1 << USB_PORT_FEAT_C_CONNECTION);
+}
+
+#endif
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+
+#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \
+		| MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \
+		| MUSB_INTR_RESET)
+
+static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
+				u8 devctl, u8 power)
+{
+	irqreturn_t handled = IRQ_NONE;
+	void __iomem *mbase = musb->mregs;
+
+	DBG(3, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
+		int_usb);
+
+	/* in host mode, the peripheral may issue remote wakeup.
+	 * in peripheral mode, the host may resume the link.
+	 * spurious RESUME irqs happen too, paired with SUSPEND.
+	 */
+	if (int_usb & MUSB_INTR_RESUME) {
+		handled = IRQ_HANDLED;
+		DBG(3, "RESUME (%s)\n", otg_state_string(musb));
+
+		if (devctl & MUSB_DEVCTL_HM) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_SUSPEND:
+				/* remote wakeup?  later, GetPortStatus
+				 * will stop RESUME signaling
+				 */
+
+				if (power & MUSB_POWER_SUSPENDM) {
+					/* spurious */
+					musb->int_usb &= ~MUSB_INTR_SUSPEND;
+					DBG(2, "Spurious SUSPENDM\n");
+					break;
+				}
+
+				power &= ~MUSB_POWER_SUSPENDM;
+				musb_writeb(mbase, MUSB_POWER,
+						power | MUSB_POWER_RESUME);
+
+				musb->port1_status |=
+						(USB_PORT_STAT_C_SUSPEND << 16)
+						| MUSB_PORT_STAT_RESUME;
+				musb->rh_timer = jiffies
+						+ msecs_to_jiffies(20);
+
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				musb->is_active = 1;
+				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb->is_active = 1;
+				MUSB_DEV_MODE(musb);
+				break;
+			default:
+				WARNING("bogus %s RESUME (%s)\n",
+					"host",
+					otg_state_string(musb));
+			}
+#endif
+		} else {
+			switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			case OTG_STATE_A_SUSPEND:
+				/* possibly DISCONNECT is upcoming */
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				break;
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+			case OTG_STATE_B_WAIT_ACON:
+			case OTG_STATE_B_PERIPHERAL:
+				/* disconnect while suspended?  we may
+				 * not get a disconnect irq...
+				 */
+				if ((devctl & MUSB_DEVCTL_VBUS)
+						!= (3 << MUSB_DEVCTL_VBUS_SHIFT)
+						) {
+					musb->int_usb |= MUSB_INTR_DISCONNECT;
+					musb->int_usb &= ~MUSB_INTR_SUSPEND;
+					break;
+				}
+				musb_g_resume(musb);
+				break;
+			case OTG_STATE_B_IDLE:
+				musb->int_usb &= ~MUSB_INTR_SUSPEND;
+				break;
+#endif
+			default:
+				WARNING("bogus %s RESUME (%s)\n",
+					"peripheral",
+					otg_state_string(musb));
+			}
+		}
+	}
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* see manual for the order of the tests */
+	if (int_usb & MUSB_INTR_SESSREQ) {
+		DBG(1, "SESSION_REQUEST (%s)\n", otg_state_string(musb));
+
+		/* IRQ arrives from ID pin sense or (later, if VBUS power
+		 * is removed) SRP.  responses are time critical:
+		 *  - turn on VBUS (with silicon-specific mechanism)
+		 *  - go through A_WAIT_VRISE
+		 *  - ... to A_WAIT_BCON.
+		 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
+		 */
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+		musb->ep0_stage = MUSB_EP0_START;
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		musb_set_vbus(musb, 1);
+
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_VBUSERROR) {
+		int	ignore = 0;
+
+		/* During connection as an A-Device, we may see a short
+		 * current spikes causing voltage drop, because of cable
+		 * and peripheral capacitance combined with vbus draw.
+		 * (So: less common with truly self-powered devices, where
+		 * vbus doesn't act like a power supply.)
+		 *
+		 * Such spikes are short; usually less than ~500 usec, max
+		 * of ~2 msec.  That is, they're not sustained overcurrent
+		 * errors, though they're reported using VBUSERROR irqs.
+		 *
+		 * Workarounds:  (a) hardware: use self powered devices.
+		 * (b) software:  ignore non-repeated VBUS errors.
+		 *
+		 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
+		 * make trouble here, keeping VBUS < 4.4V ?
+		 */
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_HOST:
+			/* recovery is dicey once we've gotten past the
+			 * initial stages of enumeration, but if VBUS
+			 * stayed ok at the other end of the link, and
+			 * another reset is due (at least for high speed,
+			 * to redo the chirp etc), it might work OK...
+			 */
+		case OTG_STATE_A_WAIT_BCON:
+		case OTG_STATE_A_WAIT_VRISE:
+			if (musb->vbuserr_retry) {
+				musb->vbuserr_retry--;
+				ignore = 1;
+				devctl |= MUSB_DEVCTL_SESSION;
+				musb_writeb(mbase, MUSB_DEVCTL, devctl);
+			} else {
+				musb->port1_status |=
+					  (1 << USB_PORT_FEAT_OVER_CURRENT)
+					| (1 << USB_PORT_FEAT_C_OVER_CURRENT);
+			}
+			break;
+		default:
+			break;
+		}
+
+		DBG(1, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
+				otg_state_string(musb),
+				devctl,
+				({ char *s;
+				switch (devctl & MUSB_DEVCTL_VBUS) {
+				case 0 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<SessEnd"; break;
+				case 1 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<AValid"; break;
+				case 2 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<VBusValid"; break;
+				/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
+				default:
+					s = "VALID"; break;
+				}; s; }),
+				VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
+				musb->port1_status);
+
+		/* go through A_WAIT_VFALL then start a new session */
+		if (!ignore)
+			musb_set_vbus(musb, 0);
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_CONNECT) {
+		struct usb_hcd *hcd = musb_to_hcd(musb);
+
+		handled = IRQ_HANDLED;
+		musb->is_active = 1;
+		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+		musb->ep0_stage = MUSB_EP0_START;
+
+#ifdef CONFIG_USB_MUSB_OTG
+		/* flush endpoints when transitioning from Device Mode */
+		if (is_peripheral_active(musb)) {
+			/* REVISIT HNP; just force disconnect */
+		}
+		musb_writew(mbase, MUSB_INTRTXE, musb->epmask);
+		musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe);
+		musb_writeb(mbase, MUSB_INTRUSBE, 0xf7);
+#endif
+		musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
+					|USB_PORT_STAT_HIGH_SPEED
+					|USB_PORT_STAT_ENABLE
+					);
+		musb->port1_status |= USB_PORT_STAT_CONNECTION
+					|(USB_PORT_STAT_C_CONNECTION << 16);
+
+		/* high vs full speed is just a guess until after reset */
+		if (devctl & MUSB_DEVCTL_LSDEV)
+			musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+
+		if (hcd->status_urb)
+			usb_hcd_poll_rh_status(hcd);
+		else
+			usb_hcd_resume_root_hub(hcd);
+
+		MUSB_HST_MODE(musb);
+
+		/* indicate new connection to OTG machine */
+		switch (musb->xceiv.state) {
+		case OTG_STATE_B_PERIPHERAL:
+			if (int_usb & MUSB_INTR_SUSPEND) {
+				DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
+				musb->xceiv.state = OTG_STATE_B_HOST;
+				hcd->self.is_b_host = 1;
+				int_usb &= ~MUSB_INTR_SUSPEND;
+			} else
+				DBG(1, "CONNECT as b_peripheral???\n");
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			DBG(1, "HNP: Waiting to switch to b_host state\n");
+			musb->xceiv.state = OTG_STATE_B_HOST;
+			hcd->self.is_b_host = 1;
+			break;
+		default:
+			if ((devctl & MUSB_DEVCTL_VBUS)
+					== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				hcd->self.is_b_host = 0;
+			}
+			break;
+		}
+		DBG(1, "CONNECT (%s) devctl %02x\n",
+				otg_state_string(musb), devctl);
+	}
+#endif	/* CONFIG_USB_MUSB_HDRC_HCD */
+
+	/* mentor saves a bit: bus reset and babble share the same irq.
+	 * only host sees babble; only peripheral sees bus reset.
+	 */
+	if (int_usb & MUSB_INTR_RESET) {
+		if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
+			/*
+			 * Looks like non-HS BABBLE can be ignored, but
+			 * HS BABBLE is an error condition. For HS the solution
+			 * is to avoid babble in the first place and fix what
+			 * caused BABBLE. When HS BABBLE happens we can only
+			 * stop the session.
+			 */
+			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
+				DBG(1, "BABBLE devctl: %02x\n", devctl);
+			else {
+				ERR("Stopping host session -- babble\n");
+				musb_writeb(mbase, MUSB_DEVCTL, 0);
+			}
+		} else if (is_peripheral_capable()) {
+			DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
+			switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_OTG
+			case OTG_STATE_A_SUSPEND:
+				/* We need to ignore disconnect on suspend
+				 * otherwise tusb 2.0 won't reconnect after a
+				 * power cycle, which breaks otg compliance.
+				 */
+				musb->ignore_disconnect = 1;
+				musb_g_reset(musb);
+				/* FALLTHROUGH */
+			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
+				DBG(1, "HNP: Setting timer as %s\n",
+						otg_state_string(musb));
+				musb_otg_timer.data = (unsigned long)musb;
+				mod_timer(&musb_otg_timer, jiffies
+					+ msecs_to_jiffies(100));
+				break;
+			case OTG_STATE_A_PERIPHERAL:
+				musb_hnp_stop(musb);
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				DBG(1, "HNP: RESET (%s), to b_peripheral\n",
+					otg_state_string(musb));
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb_g_reset(musb);
+				break;
+#endif
+			case OTG_STATE_B_IDLE:
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				/* FALLTHROUGH */
+			case OTG_STATE_B_PERIPHERAL:
+				musb_g_reset(musb);
+				break;
+			default:
+				DBG(1, "Unhandled BUS RESET as %s\n",
+					otg_state_string(musb));
+			}
+		}
+
+		handled = IRQ_HANDLED;
+	}
+	schedule_work(&musb->irq_work);
+
+	return handled;
+}
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+				u8 devctl, u8 power)
+{
+	irqreturn_t handled = IRQ_NONE;
+
+#if 0
+/* REVISIT ... this would be for multiplexing periodic endpoints, or
+ * supporting transfer phasing to prevent exceeding ISO bandwidth
+ * limits of a given frame or microframe.
+ *
+ * It's not needed for peripheral side, which dedicates endpoints;
+ * though it _might_ use SOF irqs for other purposes.
+ *
+ * And it's not currently needed for host side, which also dedicates
+ * endpoints, relies on TX/RX interval registers, and isn't claimed
+ * to support ISO transfers yet.
+ */
+	if (int_usb & MUSB_INTR_SOF) {
+		void __iomem *mbase = musb->mregs;
+		struct musb_hw_ep	*ep;
+		u8 epnum;
+		u16 frame;
+
+		DBG(6, "START_OF_FRAME\n");
+		handled = IRQ_HANDLED;
+
+		/* start any periodic Tx transfers waiting for current frame */
+		frame = musb_readw(mbase, MUSB_FRAME);
+		ep = musb->endpoints;
+		for (epnum = 1; (epnum < musb->nr_endpoints)
+					&& (musb->epmask >= (1 << epnum));
+				epnum++, ep++) {
+			/*
+			 * FIXME handle framecounter wraps (12 bits)
+			 * eliminate duplicated StartUrb logic
+			 */
+			if (ep->dwWaitFrame >= frame) {
+				ep->dwWaitFrame = 0;
+				pr_debug("SOF --> periodic TX%s on %d\n",
+					ep->tx_channel ? " DMA" : "",
+					epnum);
+				if (!ep->tx_channel)
+					musb_h_tx_start(musb, epnum);
+				else
+					cppi_hostdma_start(musb, epnum);
+			}
+		}		/* end of for loop */
+	}
+#endif
+
+	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+		DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n",
+				otg_state_string(musb),
+				MUSB_MODE(musb), devctl);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		case OTG_STATE_A_HOST:
+		case OTG_STATE_A_SUSPEND:
+			musb_root_disconnect(musb);
+			if (musb->a_wait_bcon != 0)
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+#endif	/* HOST */
+#ifdef CONFIG_USB_MUSB_OTG
+		case OTG_STATE_B_HOST:
+			musb_hnp_stop(musb);
+			break;
+		case OTG_STATE_A_PERIPHERAL:
+			musb_hnp_stop(musb);
+			musb_root_disconnect(musb);
+			/* FALLTHROUGH */
+		case OTG_STATE_B_WAIT_ACON:
+			/* FALLTHROUGH */
+#endif	/* OTG */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		case OTG_STATE_B_PERIPHERAL:
+		case OTG_STATE_B_IDLE:
+			musb_g_disconnect(musb);
+			break;
+#endif	/* GADGET */
+		default:
+			WARNING("unhandled DISCONNECT transition (%s)\n",
+				otg_state_string(musb));
+			break;
+		}
+
+		schedule_work(&musb->irq_work);
+	}
+
+	if (int_usb & MUSB_INTR_SUSPEND) {
+		DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
+				otg_state_string(musb), devctl, power);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv.state) {
+#ifdef	CONFIG_USB_MUSB_OTG
+		case OTG_STATE_A_PERIPHERAL:
+			/*
+			 * We cannot stop HNP here, devctl BDEVICE might be
+			 * still set.
+			 */
+			break;
+#endif
+		case OTG_STATE_B_PERIPHERAL:
+			musb_g_suspend(musb);
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.gadget->b_hnp_enable;
+			if (musb->is_active) {
+#ifdef	CONFIG_USB_MUSB_OTG
+				musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+				DBG(1, "HNP: Setting timer for b_ase0_brst\n");
+				musb_otg_timer.data = (unsigned long)musb;
+				mod_timer(&musb_otg_timer, jiffies
+					+ msecs_to_jiffies(TB_ASE0_BRST));
+#endif
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+		case OTG_STATE_A_HOST:
+			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			break;
+		case OTG_STATE_B_HOST:
+			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
+			DBG(1, "REVISIT: SUSPEND as B_HOST\n");
+			break;
+		default:
+			/* "should not happen" */
+			musb->is_active = 0;
+			break;
+		}
+		schedule_work(&musb->irq_work);
+	}
+
+
+	return handled;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+* Program the HDRC to start (enable interrupts, dma, etc.).
+*/
+void musb_start(struct musb *musb)
+{
+	void __iomem	*regs = musb->mregs;
+	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
+
+	DBG(2, "<== devctl %02x\n", devctl);
+
+	/*  Set INT enable registers, enable interrupts */
+	musb_writew(regs, MUSB_INTRTXE, musb->epmask);
+	musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+	musb_writeb(regs, MUSB_TESTMODE, 0);
+
+	/* put into basic highspeed mode and start session */
+	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+						| MUSB_POWER_SOFTCONN
+						| MUSB_POWER_HSENAB
+						/* ENSUSPEND wedges tusb */
+						/* | MUSB_POWER_ENSUSPEND */
+						);
+
+	musb->is_active = 0;
+	devctl = musb_readb(regs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+
+	if (is_otg_enabled(musb)) {
+		/* session started after:
+		 * (a) ID-grounded irq, host mode;
+		 * (b) vbus present/connect IRQ, peripheral mode;
+		 * (c) peripheral initiates, using SRP
+		 */
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->is_active = 1;
+		else
+			devctl |= MUSB_DEVCTL_SESSION;
+
+	} else if (is_host_enabled(musb)) {
+		/* assume ID pin is hard-wired to ground */
+		devctl |= MUSB_DEVCTL_SESSION;
+
+	} else /* peripheral is enabled */ {
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->is_active = 1;
+	}
+	musb_platform_enable(musb);
+	musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
+
+static void musb_generic_disable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u16	temp;
+
+	/* disable interrupts */
+	musb_writeb(mbase, MUSB_INTRUSBE, 0);
+	musb_writew(mbase, MUSB_INTRTXE, 0);
+	musb_writew(mbase, MUSB_INTRRXE, 0);
+
+	/* off */
+	musb_writeb(mbase, MUSB_DEVCTL, 0);
+
+	/*  flush pending interrupts */
+	temp = musb_readb(mbase, MUSB_INTRUSB);
+	temp = musb_readw(mbase, MUSB_INTRTX);
+	temp = musb_readw(mbase, MUSB_INTRRX);
+
+}
+
+/*
+ * Make the HDRC stop (disable interrupts, etc.);
+ * reversible by musb_start
+ * called on gadget driver unregister
+ * with controller locked, irqs blocked
+ * acts as a NOP unless some role activated the hardware
+ */
+void musb_stop(struct musb *musb)
+{
+	/* stop IRQs, timers, ... */
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	DBG(3, "HDRC disabled\n");
+
+	/* FIXME
+	 *  - mark host and/or peripheral drivers unusable/inactive
+	 *  - disable DMA (and enable it in HdrcStart)
+	 *  - make sure we can musb_start() after musb_stop(); with
+	 *    OTG mode, gadget driver module rmmod/modprobe cycles that
+	 *  - ...
+	 */
+	musb_platform_try_idle(musb, 0);
+}
+
+static void musb_shutdown(struct platform_device *pdev)
+{
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	if (musb->clock) {
+		clk_put(musb->clock);
+		musb->clock = NULL;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* FIXME power down */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The silicon either has hard-wired endpoint configurations, or else
+ * "dynamic fifo" sizing.  The driver has support for both, though at this
+ * writing only the dynamic sizing is very well tested.   We use normal
+ * idioms to so both modes are compile-tested, but dead code elimination
+ * leaves only the relevant one in the object file.
+ *
+ * We don't currently use dynamic fifo setup capability to do anything
+ * more than selecting one of a bunch of predefined configurations.
+ */
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+static ushort __initdata fifo_mode = 4;
+#else
+static ushort __initdata fifo_mode = 2;
+#endif
+
+/* "modprobe ... fifo_mode=1" etc */
+module_param(fifo_mode, ushort, 0);
+MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
+
+
+enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed));
+enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed));
+
+struct fifo_cfg {
+	u8		hw_ep_num;
+	enum fifo_style	style;
+	enum buf_mode	mode;
+	u16		maxpacket;
+};
+
+/*
+ * tables defining fifo_mode values.  define more if you like.
+ * for host side, make sure both halves of ep1 are set up.
+ */
+
+/* mode 0 - fits in 2KB */
+static struct fifo_cfg __initdata mode_0_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 1 - fits in 4KB */
+static struct fifo_cfg __initdata mode_1_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 2 - fits in 4KB */
+static struct fifo_cfg __initdata mode_2_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 3 - fits in 4KB */
+static struct fifo_cfg __initdata mode_3_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 4 - fits in 16KB */
+static struct fifo_cfg __initdata mode_4_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
+
+/*
+ * configure a fifo; for non-shared endpoints, this may be called
+ * once for a tx fifo and once for an rx fifo.
+ *
+ * returns negative errno or offset for next fifo.
+ */
+static int __init
+fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
+		const struct fifo_cfg *cfg, u16 offset)
+{
+	void __iomem	*mbase = musb->mregs;
+	int	size = 0;
+	u16	maxpacket = cfg->maxpacket;
+	u16	c_off = offset >> 3;
+	u8	c_size;
+
+	/* expect hw_ep has already been zero-initialized */
+
+	size = ffs(max(maxpacket, (u16) 8)) - 1;
+	maxpacket = 1 << size;
+
+	c_size = size - 3;
+	if (cfg->mode == BUF_DOUBLE) {
+		if ((offset + (maxpacket << 1)) >
+				(1 << (musb->config->ram_bits + 2)))
+			return -EMSGSIZE;
+		c_size |= MUSB_FIFOSZ_DPB;
+	} else {
+		if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
+			return -EMSGSIZE;
+	}
+
+	/* configure the FIFO */
+	musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* EP0 reserved endpoint for control, bidirectional;
+	 * EP1 reserved for bulk, two unidirection halves.
+	 */
+	if (hw_ep->epnum == 1)
+		musb->bulk_ep = hw_ep;
+	/* REVISIT error check:  be sure ep0 can both rx and tx ... */
+#endif
+	switch (cfg->style) {
+	case FIFO_TX:
+		musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+		hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_tx = maxpacket;
+		break;
+	case FIFO_RX:
+		musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+		break;
+	case FIFO_RXTX:
+		musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+
+		musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+		hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
+		hw_ep->max_packet_sz_tx = maxpacket;
+
+		hw_ep->is_shared_fifo = true;
+		break;
+	}
+
+	/* NOTE rx and tx endpoint irqs aren't managed separately,
+	 * which happens to be ok
+	 */
+	musb->epmask |= (1 << hw_ep->epnum);
+
+	return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
+}
+
+static struct fifo_cfg __initdata ep0_cfg = {
+	.style = FIFO_RXTX, .maxpacket = 64,
+};
+
+static int __init ep_config_from_table(struct musb *musb)
+{
+	const struct fifo_cfg	*cfg;
+	unsigned		i, n;
+	int			offset;
+	struct musb_hw_ep	*hw_ep = musb->endpoints;
+
+	switch (fifo_mode) {
+	default:
+		fifo_mode = 0;
+		/* FALLTHROUGH */
+	case 0:
+		cfg = mode_0_cfg;
+		n = ARRAY_SIZE(mode_0_cfg);
+		break;
+	case 1:
+		cfg = mode_1_cfg;
+		n = ARRAY_SIZE(mode_1_cfg);
+		break;
+	case 2:
+		cfg = mode_2_cfg;
+		n = ARRAY_SIZE(mode_2_cfg);
+		break;
+	case 3:
+		cfg = mode_3_cfg;
+		n = ARRAY_SIZE(mode_3_cfg);
+		break;
+	case 4:
+		cfg = mode_4_cfg;
+		n = ARRAY_SIZE(mode_4_cfg);
+		break;
+	}
+
+	printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
+			musb_driver_name, fifo_mode);
+
+
+	offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
+	/* assert(offset > 0) */
+
+	/* NOTE:  for RTL versions >= 1.400 EPINFO and RAMINFO would
+	 * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
+	 */
+
+	for (i = 0; i < n; i++) {
+		u8	epn = cfg->hw_ep_num;
+
+		if (epn >= musb->config->num_eps) {
+			pr_debug("%s: invalid ep %d\n",
+					musb_driver_name, epn);
+			continue;
+		}
+		offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
+		if (offset < 0) {
+			pr_debug("%s: mem overrun, ep %d\n",
+					musb_driver_name, epn);
+			return -EINVAL;
+		}
+		epn++;
+		musb->nr_endpoints = max(epn, musb->nr_endpoints);
+	}
+
+	printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
+			musb_driver_name,
+			n + 1, musb->config->num_eps * 2 - 1,
+			offset, (1 << (musb->config->ram_bits + 2)));
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+#endif
+
+	return 0;
+}
+
+
+/*
+ * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
+ * @param musb the controller
+ */
+static int __init ep_config_from_hw(struct musb *musb)
+{
+	u8 epnum = 0, reg;
+	struct musb_hw_ep *hw_ep;
+	void *mbase = musb->mregs;
+
+	DBG(2, "<== static silicon ep config\n");
+
+	/* FIXME pick up ep0 maxpacket size */
+
+	for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
+		musb_ep_select(mbase, epnum);
+		hw_ep = musb->endpoints + epnum;
+
+		/* read from core using indexed model */
+		reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE);
+		if (!reg) {
+			/* 0's returned when no more endpoints */
+			break;
+		}
+		musb->nr_endpoints++;
+		musb->epmask |= (1 << epnum);
+
+		hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
+
+		/* shared TX/RX FIFO? */
+		if ((reg & 0xf0) == 0xf0) {
+			hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
+			hw_ep->is_shared_fifo = true;
+			continue;
+		} else {
+			hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
+			hw_ep->is_shared_fifo = false;
+		}
+
+		/* FIXME set up hw_ep->{rx,tx}_double_buffered */
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		/* pick an RX/TX endpoint for bulk */
+		if (hw_ep->max_packet_sz_tx < 512
+				|| hw_ep->max_packet_sz_rx < 512)
+			continue;
+
+		/* REVISIT:  this algorithm is lazy, we should at least
+		 * try to pick a double buffered endpoint.
+		 */
+		if (musb->bulk_ep)
+			continue;
+		musb->bulk_ep = hw_ep;
+#endif
+	}
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+#endif
+
+	return 0;
+}
+
+enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
+
+/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
+ * configure endpoints, or take their config from silicon
+ */
+static int __init musb_core_init(u16 musb_type, struct musb *musb)
+{
+#ifdef MUSB_AHB_ID
+	u32 data;
+#endif
+	u8 reg;
+	char *type;
+	u16 hwvers, rev_major, rev_minor;
+	char aInfo[78], aRevision[32], aDate[12];
+	void __iomem	*mbase = musb->mregs;
+	int		status = 0;
+	int		i;
+
+	/* log core options (read using indexed model) */
+	musb_ep_select(mbase, 0);
+	reg = musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
+
+	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
+	if (reg & MUSB_CONFIGDATA_DYNFIFO)
+		strcat(aInfo, ", dyn FIFOs");
+	if (reg & MUSB_CONFIGDATA_MPRXE) {
+		strcat(aInfo, ", bulk combine");
+#ifdef C_MP_RX
+		musb->bulk_combine = true;
+#else
+		strcat(aInfo, " (X)");		/* no driver support */
+#endif
+	}
+	if (reg & MUSB_CONFIGDATA_MPTXE) {
+		strcat(aInfo, ", bulk split");
+#ifdef C_MP_TX
+		musb->bulk_split = true;
+#else
+		strcat(aInfo, " (X)");		/* no driver support */
+#endif
+	}
+	if (reg & MUSB_CONFIGDATA_HBRXE) {
+		strcat(aInfo, ", HB-ISO Rx");
+		strcat(aInfo, " (X)");		/* no driver support */
+	}
+	if (reg & MUSB_CONFIGDATA_HBTXE) {
+		strcat(aInfo, ", HB-ISO Tx");
+		strcat(aInfo, " (X)");		/* no driver support */
+	}
+	if (reg & MUSB_CONFIGDATA_SOFTCONE)
+		strcat(aInfo, ", SoftConn");
+
+	printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
+			musb_driver_name, reg, aInfo);
+
+#ifdef MUSB_AHB_ID
+	data = musb_readl(mbase, 0x404);
+	sprintf(aDate, "%04d-%02x-%02x", (data & 0xffff),
+		(data >> 16) & 0xff, (data >> 24) & 0xff);
+	/* FIXME ID2 and ID3 are unused */
+	data = musb_readl(mbase, 0x408);
+	printk(KERN_DEBUG "ID2=%lx\n", (long unsigned)data);
+	data = musb_readl(mbase, 0x40c);
+	printk(KERN_DEBUG "ID3=%lx\n", (long unsigned)data);
+	reg = musb_readb(mbase, 0x400);
+	musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC;
+#else
+	aDate[0] = 0;
+#endif
+	if (MUSB_CONTROLLER_MHDRC == musb_type) {
+		musb->is_multipoint = 1;
+		type = "M";
+	} else {
+		musb->is_multipoint = 0;
+		type = "";
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#ifndef	CONFIG_USB_OTG_BLACKLIST_HUB
+		printk(KERN_ERR
+			"%s: kernel must blacklist external hubs\n",
+			musb_driver_name);
+#endif
+#endif
+	}
+
+	/* log release info */
+	hwvers = musb_readw(mbase, MUSB_HWVERS);
+	rev_major = (hwvers >> 10) & 0x1f;
+	rev_minor = hwvers & 0x3ff;
+	snprintf(aRevision, 32, "%d.%d%s", rev_major,
+		rev_minor, (hwvers & 0x8000) ? "RC" : "");
+	printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n",
+			musb_driver_name, type, aRevision, aDate);
+
+	/* configure ep0 */
+	musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+
+	/* discover endpoint configuration */
+	musb->nr_endpoints = 1;
+	musb->epmask = 1;
+
+	if (reg & MUSB_CONFIGDATA_DYNFIFO) {
+		if (musb->config->dyn_fifo)
+			status = ep_config_from_table(musb);
+		else {
+			ERR("reconfigure software for Dynamic FIFOs\n");
+			status = -ENODEV;
+		}
+	} else {
+		if (!musb->config->dyn_fifo)
+			status = ep_config_from_hw(musb);
+		else {
+			ERR("reconfigure software for static FIFOs\n");
+			return -ENODEV;
+		}
+	}
+
+	if (status < 0)
+		return status;
+
+	/* finish init, and print endpoint config */
+	for (i = 0; i < musb->nr_endpoints; i++) {
+		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
+
+		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
+#ifdef CONFIG_USB_TUSB6010
+		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
+		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
+		hw_ep->fifo_sync_va =
+			musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i);
+
+		if (i == 0)
+			hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
+		else
+			hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2);
+#endif
+
+		hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		hw_ep->target_regs = MUSB_BUSCTL_OFFSET(i, 0) + mbase;
+		hw_ep->rx_reinit = 1;
+		hw_ep->tx_reinit = 1;
+#endif
+
+		if (hw_ep->max_packet_sz_tx) {
+			printk(KERN_DEBUG
+				"%s: hw_ep %d%s, %smax %d\n",
+				musb_driver_name, i,
+				hw_ep->is_shared_fifo ? "shared" : "tx",
+				hw_ep->tx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_tx);
+		}
+		if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
+			printk(KERN_DEBUG
+				"%s: hw_ep %d%s, %smax %d\n",
+				musb_driver_name, i,
+				"rx",
+				hw_ep->rx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_rx);
+		}
+		if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
+			DBG(1, "hw_ep %d not configured\n", i);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+
+static irqreturn_t generic_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE;
+	struct musb	*musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* REVISIT we sometimes get spurious IRQs on g_ep0
+	 * not clear why...
+	 */
+	if (retval != IRQ_HANDLED)
+		DBG(5, "spurious?\n");
+
+	return IRQ_HANDLED;
+}
+
+#else
+#define generic_interrupt	NULL
+#endif
+
+/*
+ * handle all the irqs defined by the HDRC core. for now we expect:  other
+ * irq sources (phy, dma, etc) will be handled first, musb->int_* values
+ * will be assigned, and the irq will already have been acked.
+ *
+ * called in irq context with spinlock held, irqs blocked
+ */
+irqreturn_t musb_interrupt(struct musb *musb)
+{
+	irqreturn_t	retval = IRQ_NONE;
+	u8		devctl, power;
+	int		ep_num;
+	u32		reg;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	power = musb_readb(musb->mregs, MUSB_POWER);
+
+	DBG(4, "** IRQ %s usb%04x tx%04x rx%04x\n",
+		(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
+		musb->int_usb, musb->int_tx, musb->int_rx);
+
+	/* the core can interrupt us for multiple reasons; docs have
+	 * a generic interrupt flowchart to follow
+	 */
+	if (musb->int_usb & STAGE0_MASK)
+		retval |= musb_stage0_irq(musb, musb->int_usb,
+				devctl, power);
+
+	/* "stage 1" is handling endpoint irqs */
+
+	/* handle endpoint 0 first */
+	if (musb->int_tx & 1) {
+		if (devctl & MUSB_DEVCTL_HM)
+			retval |= musb_h_ep0_irq(musb);
+		else
+			retval |= musb_g_ep0_irq(musb);
+	}
+
+	/* RX on endpoints 1-15 */
+	reg = musb->int_rx >> 1;
+	ep_num = 1;
+	while (reg) {
+		if (reg & 1) {
+			/* musb_ep_select(musb->mregs, ep_num); */
+			/* REVISIT just retval = ep->rx_irq(...) */
+			retval = IRQ_HANDLED;
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_rx(musb, ep_num);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_rx(musb, ep_num);
+			}
+		}
+
+		reg >>= 1;
+		ep_num++;
+	}
+
+	/* TX on endpoints 1-15 */
+	reg = musb->int_tx >> 1;
+	ep_num = 1;
+	while (reg) {
+		if (reg & 1) {
+			/* musb_ep_select(musb->mregs, ep_num); */
+			/* REVISIT just retval |= ep->tx_irq(...) */
+			retval = IRQ_HANDLED;
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_tx(musb, ep_num);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_tx(musb, ep_num);
+			}
+		}
+		reg >>= 1;
+		ep_num++;
+	}
+
+	/* finish handling "global" interrupts after handling fifos */
+	if (musb->int_usb)
+		retval |= musb_stage2_irq(musb,
+				musb->int_usb, devctl, power);
+
+	return retval;
+}
+
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static int __initdata use_dma = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+
+void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
+{
+	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	/* called with controller lock already held */
+
+	if (!epnum) {
+#ifndef CONFIG_USB_TUSB_OMAP_DMA
+		if (!is_cppi_enabled()) {
+			/* endpoint 0 */
+			if (devctl & MUSB_DEVCTL_HM)
+				musb_h_ep0_irq(musb);
+			else
+				musb_g_ep0_irq(musb);
+		}
+#endif
+	} else {
+		/* endpoints 1..15 */
+		if (transmit) {
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_tx(musb, epnum);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_tx(musb, epnum);
+			}
+		} else {
+			/* receive */
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_rx(musb, epnum);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_rx(musb, epnum);
+			}
+		}
+	}
+}
+
+#else
+#define use_dma			0
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_SYSFS
+
+static ssize_t
+musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = sprintf(buf, "%s\n", otg_state_string(musb));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static ssize_t
+musb_mode_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	if (!strncmp(buf, "host", 4))
+		musb_platform_set_mode(musb, MUSB_HOST);
+	if (!strncmp(buf, "peripheral", 10))
+		musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+	if (!strncmp(buf, "otg", 3))
+		musb_platform_set_mode(musb, MUSB_OTG);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return n;
+}
+static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store);
+
+static ssize_t
+musb_vbus_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+
+	if (sscanf(buf, "%lu", &val) < 1) {
+		printk(KERN_ERR "Invalid VBUS timeout ms value\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb->a_wait_bcon = val;
+	if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON)
+		musb->is_active = 0;
+	musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return n;
+}
+
+static ssize_t
+musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+	int		vbus;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	val = musb->a_wait_bcon;
+	vbus = musb_platform_get_vbus_status(musb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return sprintf(buf, "Vbus %s, timeout %lu\n",
+			vbus ? "on" : "off", val);
+}
+static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+/* Gadget drivers can't know that a host is connected so they might want
+ * to start SRP, but users can.  This allows userspace to trigger SRP.
+ */
+static ssize_t
+musb_srp_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned short	srp;
+
+	if (sscanf(buf, "%hu", &srp) != 1
+			|| (srp != 1)) {
+		printk(KERN_ERR "SRP: Value must be 1\n");
+		return -EINVAL;
+	}
+
+	if (srp == 1)
+		musb_g_wakeup(musb);
+
+	return n;
+}
+static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
+
+#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
+
+#endif	/* sysfs */
+
+/* Only used to provide driver mode change events */
+static void musb_irq_work(struct work_struct *data)
+{
+	struct musb *musb = container_of(data, struct musb, irq_work);
+	static int old_state;
+
+	if (musb->xceiv.state != old_state) {
+		old_state = musb->xceiv.state;
+		sysfs_notify(&musb->controller->kobj, NULL, "mode");
+	}
+}
+
+/* --------------------------------------------------------------------------
+ * Init support
+ */
+
+static struct musb *__init
+allocate_instance(struct device *dev,
+		struct musb_hdrc_config *config, void __iomem *mbase)
+{
+	struct musb		*musb;
+	struct musb_hw_ep	*ep;
+	int			epnum;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	struct usb_hcd	*hcd;
+
+	hcd = usb_create_hcd(&musb_hc_driver, dev, dev->bus_id);
+	if (!hcd)
+		return NULL;
+	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
+
+	musb = hcd_to_musb(hcd);
+	INIT_LIST_HEAD(&musb->control);
+	INIT_LIST_HEAD(&musb->in_bulk);
+	INIT_LIST_HEAD(&musb->out_bulk);
+
+	hcd->uses_new_polling = 1;
+
+	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+#else
+	musb = kzalloc(sizeof *musb, GFP_KERNEL);
+	if (!musb)
+		return NULL;
+	dev_set_drvdata(dev, musb);
+
+#endif
+
+	musb->mregs = mbase;
+	musb->ctrl_base = mbase;
+	musb->nIrq = -ENODEV;
+	musb->config = config;
+	for (epnum = 0, ep = musb->endpoints;
+			epnum < musb->config->num_eps;
+			epnum++, ep++) {
+
+		ep->musb = musb;
+		ep->epnum = epnum;
+	}
+
+	musb->controller = dev;
+	return musb;
+}
+
+static void musb_free(struct musb *musb)
+{
+	/* this has multiple entry modes. it handles fault cleanup after
+	 * probe(), where things may be partially set up, as well as rmmod
+	 * cleanup after everything's been de-activated.
+	 */
+
+#ifdef CONFIG_SYSFS
+	device_remove_file(musb->controller, &dev_attr_mode);
+	device_remove_file(musb->controller, &dev_attr_vbus);
+#ifdef CONFIG_USB_MUSB_OTG
+	device_remove_file(musb->controller, &dev_attr_srp);
+#endif
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	musb_gadget_cleanup(musb);
+#endif
+
+	if (musb->nIrq >= 0) {
+		disable_irq_wake(musb->nIrq);
+		free_irq(musb->nIrq, musb);
+	}
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		(void) c->stop(c);
+		dma_controller_destroy(c);
+	}
+
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_platform_exit(musb);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
+	if (musb->clock) {
+		clk_disable(musb->clock);
+		clk_put(musb->clock);
+	}
+
+#ifdef CONFIG_USB_MUSB_OTG
+	put_device(musb->xceiv.dev);
+#endif
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	usb_put_hcd(musb_to_hcd(musb));
+#else
+	kfree(musb);
+#endif
+}
+
+/*
+ * Perform generic per-controller initialization.
+ *
+ * @pDevice: the controller (already clocked, etc)
+ * @nIrq: irq
+ * @mregs: virtual address of controller registers,
+ *	not yet corrected for platform-specific offsets
+ */
+static int __init
+musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
+{
+	int			status;
+	struct musb		*musb;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+
+	/* The driver might handle more features than the board; OK.
+	 * Fail when the board needs a feature that's not enabled.
+	 */
+	if (!plat) {
+		dev_dbg(dev, "no platform_data?\n");
+		return -ENODEV;
+	}
+	switch (plat->mode) {
+	case MUSB_HOST:
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		break;
+#else
+		goto bad_config;
+#endif
+	case MUSB_PERIPHERAL:
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		break;
+#else
+		goto bad_config;
+#endif
+	case MUSB_OTG:
+#ifdef CONFIG_USB_MUSB_OTG
+		break;
+#else
+bad_config:
+#endif
+	default:
+		dev_err(dev, "incompatible Kconfig role setting\n");
+		return -EINVAL;
+	}
+
+	/* allocate */
+	musb = allocate_instance(dev, plat->config, ctrl);
+	if (!musb)
+		return -ENOMEM;
+
+	spin_lock_init(&musb->lock);
+	musb->board_mode = plat->mode;
+	musb->board_set_power = plat->set_power;
+	musb->set_clock = plat->set_clock;
+	musb->min_power = plat->min_power;
+
+	/* Clock usage is chip-specific ... functional clock (DaVinci,
+	 * OMAP2430), or PHY ref (some TUSB6010 boards).  All this core
+	 * code does is make sure a clock handle is available; platform
+	 * code manages it during start/stop and suspend/resume.
+	 */
+	if (plat->clock) {
+		musb->clock = clk_get(dev, plat->clock);
+		if (IS_ERR(musb->clock)) {
+			status = PTR_ERR(musb->clock);
+			musb->clock = NULL;
+			goto fail;
+		}
+	}
+
+	/* assume vbus is off */
+
+	/* platform adjusts musb->mregs and musb->isr if needed,
+	 * and activates clocks
+	 */
+	musb->isr = generic_interrupt;
+	status = musb_platform_init(musb);
+
+	if (status < 0)
+		goto fail;
+	if (!musb->isr) {
+		status = -ENODEV;
+		goto fail2;
+	}
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	if (use_dma && dev->dma_mask) {
+		struct dma_controller	*c;
+
+		c = dma_controller_create(musb, musb->mregs);
+		musb->dma_controller = c;
+		if (c)
+			(void) c->start(c);
+	}
+#endif
+	/* ideally this would be abstracted in platform setup */
+	if (!is_dma_capable() || !musb->dma_controller)
+		dev->dma_mask = NULL;
+
+	/* be sure interrupts are disabled before connecting ISR */
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+
+	/* setup musb parts of the core (especially endpoints) */
+	status = musb_core_init(plat->config->multipoint
+			? MUSB_CONTROLLER_MHDRC
+			: MUSB_CONTROLLER_HDRC, musb);
+	if (status < 0)
+		goto fail2;
+
+	/* Init IRQ workqueue before request_irq */
+	INIT_WORK(&musb->irq_work, musb_irq_work);
+
+	/* attach to the IRQ */
+	if (request_irq(nIrq, musb->isr, 0, dev->bus_id, musb)) {
+		dev_err(dev, "request_irq %d failed!\n", nIrq);
+		status = -ENODEV;
+		goto fail2;
+	}
+	musb->nIrq = nIrq;
+/* FIXME this handles wakeup irqs wrong */
+	if (enable_irq_wake(nIrq) == 0)
+		device_init_wakeup(dev, 1);
+
+	pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n",
+			musb_driver_name,
+			({char *s;
+			switch (musb->board_mode) {
+			case MUSB_HOST:		s = "Host"; break;
+			case MUSB_PERIPHERAL:	s = "Peripheral"; break;
+			default:		s = "OTG"; break;
+			}; s; }),
+			ctrl,
+			(is_dma_capable() && musb->dma_controller)
+				? "DMA" : "PIO",
+			musb->nIrq);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* host side needs more setup, except for no-host modes */
+	if (musb->board_mode != MUSB_PERIPHERAL) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
+		if (musb->board_mode == MUSB_OTG)
+			hcd->self.otg_port = 1;
+		musb->xceiv.host = &hcd->self;
+		hcd->power_budget = 2 * (plat->power ? : 250);
+	}
+#endif				/* CONFIG_USB_MUSB_HDRC_HCD */
+
+	/* For the host-only role, we can activate right away.
+	 * (We expect the ID pin to be forcibly grounded!!)
+	 * Otherwise, wait till the gadget driver hooks up.
+	 */
+	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+		MUSB_HST_MODE(musb);
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+
+		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+		if (status)
+			goto fail;
+
+		DBG(1, "%s mode, status %d, devctl %02x %c\n",
+			"HOST", status,
+			musb_readb(musb->mregs, MUSB_DEVCTL),
+			(musb_readb(musb->mregs, MUSB_DEVCTL)
+					& MUSB_DEVCTL_BDEVICE
+				? 'B' : 'A'));
+
+	} else /* peripheral is enabled */ {
+		MUSB_DEV_MODE(musb);
+		musb->xceiv.default_a = 0;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+
+		status = musb_gadget_setup(musb);
+		if (status)
+			goto fail;
+
+		DBG(1, "%s mode, status %d, dev%02x\n",
+			is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
+			status,
+			musb_readb(musb->mregs, MUSB_DEVCTL));
+
+	}
+
+	return 0;
+
+fail:
+	if (musb->clock)
+		clk_put(musb->clock);
+	device_init_wakeup(dev, 0);
+	musb_free(musb);
+	return status;
+
+#ifdef CONFIG_SYSFS
+	status = device_create_file(dev, &dev_attr_mode);
+	status = device_create_file(dev, &dev_attr_vbus);
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	status = device_create_file(dev, &dev_attr_srp);
+#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
+	status = 0;
+#endif
+
+	return status;
+
+fail2:
+	musb_platform_exit(musb);
+	goto fail;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
+ * bridge to a platform device; this driver then suffices.
+ */
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static u64	*orig_dma_mask;
+#endif
+
+static int __init musb_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	int		irq = platform_get_irq(pdev, 0);
+	struct resource	*iomem;
+	void __iomem	*base;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem || irq == 0)
+		return -ENODEV;
+
+	base = ioremap(iomem->start, iomem->end - iomem->start + 1);
+	if (!base) {
+		dev_err(dev, "ioremap failed\n");
+		return -ENOMEM;
+	}
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	/* clobbered by use_dma=n */
+	orig_dma_mask = dev->dma_mask;
+#endif
+	return musb_init_controller(dev, irq, base);
+}
+
+static int __devexit musb_remove(struct platform_device *pdev)
+{
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+	void __iomem	*ctrl_base = musb->ctrl_base;
+
+	/* this gets called on rmmod.
+	 *  - Host mode: host may still be active
+	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
+	 *  - OTG mode: both roles are deactivated (or never-activated)
+	 */
+	musb_shutdown(pdev);
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (musb->board_mode == MUSB_HOST)
+		usb_remove_hcd(musb_to_hcd(musb));
+#endif
+	musb_free(musb);
+	iounmap(ctrl_base);
+	device_init_wakeup(&pdev->dev, 0);
+#ifndef CONFIG_MUSB_PIO_ONLY
+	pdev->dev.dma_mask = orig_dma_mask;
+#endif
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+static int musb_suspend(struct platform_device *pdev, pm_message_t message)
+{
+	unsigned long	flags;
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+
+	if (!musb->clock)
+		return 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (is_peripheral_active(musb)) {
+		/* FIXME force disconnect unless we know USB will wake
+		 * the system up quickly enough to respond ...
+		 */
+	} else if (is_host_active(musb)) {
+		/* we know all the children are suspended; sometimes
+		 * they will even be wakeup-enabled.
+		 */
+	}
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 0);
+	else
+		clk_disable(musb->clock);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+static int musb_resume(struct platform_device *pdev)
+{
+	unsigned long	flags;
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+
+	if (!musb->clock)
+		return 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 1);
+	else
+		clk_enable(musb->clock);
+
+	/* for static cmos like DaVinci, register values were preserved
+	 * unless for some reason the whole soc powered down and we're
+	 * not treating that as a whole-system restart (e.g. swsusp)
+	 */
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+#else
+#define	musb_suspend	NULL
+#define	musb_resume	NULL
+#endif
+
+static struct platform_driver musb_driver = {
+	.driver = {
+		.name		= (char *)musb_driver_name,
+		.bus		= &platform_bus_type,
+		.owner		= THIS_MODULE,
+	},
+	.remove		= __devexit_p(musb_remove),
+	.shutdown	= musb_shutdown,
+	.suspend	= musb_suspend,
+	.resume		= musb_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init musb_init(void)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (usb_disabled())
+		return 0;
+#endif
+
+	pr_info("%s: version " MUSB_VERSION ", "
+#ifdef CONFIG_MUSB_PIO_ONLY
+		"pio"
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+		"cppi-dma"
+#elif defined(CONFIG_USB_INVENTRA_DMA)
+		"musb-dma"
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+		"tusb-omap-dma"
+#else
+		"?dma?"
+#endif
+		", "
+#ifdef CONFIG_USB_MUSB_OTG
+		"otg (peripheral+host)"
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+		"peripheral"
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+		"host"
+#endif
+		", debug=%d\n",
+		musb_driver_name, debug);
+	return platform_driver_probe(&musb_driver, musb_probe);
+}
+
+/* make us init after usbcore and before usb
+ * gadget and host-side drivers start to register
+ */
+subsys_initcall(musb_init);
+
+static void __exit musb_cleanup(void)
+{
+	platform_driver_unregister(&musb_driver);
+}
+module_exit(musb_cleanup);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
new file mode 100644
index 00000000000..82227251931
--- /dev/null
+++ b/drivers/usb/musb/musb_core.h
@@ -0,0 +1,488 @@
+/*
+ * MUSB OTG driver defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_CORE_H__
+#define __MUSB_CORE_H__
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
+
+struct musb;
+struct musb_hw_ep;
+struct musb_ep;
+
+
+#include "musb_debug.h"
+#include "musb_dma.h"
+
+#include "musb_io.h"
+#include "musb_regs.h"
+
+#include "musb_gadget.h"
+#include "../core/hcd.h"
+#include "musb_host.h"
+
+
+
+#ifdef CONFIG_USB_MUSB_OTG
+
+#define	is_peripheral_enabled(musb)	((musb)->board_mode != MUSB_HOST)
+#define	is_host_enabled(musb)		((musb)->board_mode != MUSB_PERIPHERAL)
+#define	is_otg_enabled(musb)		((musb)->board_mode == MUSB_OTG)
+
+/* NOTE:  otg and peripheral-only state machines start at B_IDLE.
+ * OTG or host-only go to A_IDLE when ID is sensed.
+ */
+#define is_peripheral_active(m)		(!(m)->is_host)
+#define is_host_active(m)		((m)->is_host)
+
+#else
+#define	is_peripheral_enabled(musb)	is_peripheral_capable()
+#define	is_host_enabled(musb)		is_host_capable()
+#define	is_otg_enabled(musb)		0
+
+#define	is_peripheral_active(musb)	is_peripheral_capable()
+#define	is_host_active(musb)		is_host_capable()
+#endif
+
+#if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL)
+/* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always
+ * override that choice selection (often USB_GADGET_DUMMY_HCD).
+ */
+#ifndef CONFIG_USB_GADGET_MUSB_HDRC
+#error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC
+#endif
+#endif	/* need MUSB gadget selection */
+
+
+#ifdef CONFIG_PROC_FS
+#include <linux/fs.h>
+#define MUSB_CONFIG_PROC_FS
+#endif
+
+/****************************** PERIPHERAL ROLE *****************************/
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+#define	is_peripheral_capable()	(1)
+
+extern irqreturn_t musb_g_ep0_irq(struct musb *);
+extern void musb_g_tx(struct musb *, u8);
+extern void musb_g_rx(struct musb *, u8);
+extern void musb_g_reset(struct musb *);
+extern void musb_g_suspend(struct musb *);
+extern void musb_g_resume(struct musb *);
+extern void musb_g_wakeup(struct musb *);
+extern void musb_g_disconnect(struct musb *);
+
+#else
+
+#define	is_peripheral_capable()	(0)
+
+static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; }
+static inline void musb_g_reset(struct musb *m) {}
+static inline void musb_g_suspend(struct musb *m) {}
+static inline void musb_g_resume(struct musb *m) {}
+static inline void musb_g_wakeup(struct musb *m) {}
+static inline void musb_g_disconnect(struct musb *m) {}
+
+#endif
+
+/****************************** HOST ROLE ***********************************/
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+
+#define	is_host_capable()	(1)
+
+extern irqreturn_t musb_h_ep0_irq(struct musb *);
+extern void musb_host_tx(struct musb *, u8);
+extern void musb_host_rx(struct musb *, u8);
+
+#else
+
+#define	is_host_capable()	(0)
+
+static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; }
+static inline void musb_host_tx(struct musb *m, u8 e) {}
+static inline void musb_host_rx(struct musb *m, u8 e) {}
+
+#endif
+
+
+/****************************** CONSTANTS ********************************/
+
+#ifndef MUSB_C_NUM_EPS
+#define MUSB_C_NUM_EPS ((u8)16)
+#endif
+
+#ifndef MUSB_MAX_END0_PACKET
+#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
+#endif
+
+/* host side ep0 states */
+enum musb_h_ep0_state {
+	MUSB_EP0_IDLE,
+	MUSB_EP0_START,			/* expect ack of setup */
+	MUSB_EP0_IN,			/* expect IN DATA */
+	MUSB_EP0_OUT,			/* expect ack of OUT DATA */
+	MUSB_EP0_STATUS,		/* expect ack of STATUS */
+} __attribute__ ((packed));
+
+/* peripheral side ep0 states */
+enum musb_g_ep0_state {
+	MUSB_EP0_STAGE_SETUP,		/* idle, waiting for setup */
+	MUSB_EP0_STAGE_TX,		/* IN data */
+	MUSB_EP0_STAGE_RX,		/* OUT data */
+	MUSB_EP0_STAGE_STATUSIN,	/* (after OUT data) */
+	MUSB_EP0_STAGE_STATUSOUT,	/* (after IN data) */
+	MUSB_EP0_STAGE_ACKWAIT,		/* after zlp, before statusin */
+} __attribute__ ((packed));
+
+/* OTG protocol constants */
+#define OTG_TIME_A_WAIT_VRISE	100		/* msec (max) */
+#define OTG_TIME_A_WAIT_BCON	0		/* 0=infinite; min 1000 msec */
+#define OTG_TIME_A_IDLE_BDIS	200		/* msec (min) */
+
+/*************************** REGISTER ACCESS ********************************/
+
+/* Endpoint registers (other than dynfifo setup) can be accessed either
+ * directly with the "flat" model, or after setting up an index register.
+ */
+
+#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
+		|| defined(CONFIG_ARCH_OMAP3430)
+/* REVISIT indexed access seemed to
+ * misbehave (on DaVinci) for at least peripheral IN ...
+ */
+#define	MUSB_FLAT_REG
+#endif
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+#if	defined(CONFIG_USB_TUSB6010)
+#define musb_ep_select(_mbase, _epnum) \
+	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define	MUSB_EP_OFFSET			MUSB_TUSB_OFFSET
+
+/* "flat" mapping: each endpoint has its own i/o address */
+#elif	defined(MUSB_FLAT_REG)
+#define musb_ep_select(_mbase, _epnum)	(((void)(_mbase)), ((void)(_epnum)))
+#define	MUSB_EP_OFFSET			MUSB_FLAT_OFFSET
+
+/* "indexed" mapping: INDEX register controls register bank select */
+#else
+#define musb_ep_select(_mbase, _epnum) \
+	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define	MUSB_EP_OFFSET			MUSB_INDEXED_OFFSET
+#endif
+
+/****************************** FUNCTIONS ********************************/
+
+#define MUSB_HST_MODE(_musb)\
+	{ (_musb)->is_host = true; }
+#define MUSB_DEV_MODE(_musb) \
+	{ (_musb)->is_host = false; }
+
+#define test_devctl_hst_mode(_x) \
+	(musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
+
+#define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
+
+/******************************** TYPES *************************************/
+
+/*
+ * struct musb_hw_ep - endpoint hardware (bidirectional)
+ *
+ * Ordered slightly for better cacheline locality.
+ */
+struct musb_hw_ep {
+	struct musb		*musb;
+	void __iomem		*fifo;
+	void __iomem		*regs;
+
+#ifdef CONFIG_USB_TUSB6010
+	void __iomem		*conf;
+#endif
+
+	/* index in musb->endpoints[]  */
+	u8			epnum;
+
+	/* hardware configuration, possibly dynamic */
+	bool			is_shared_fifo;
+	bool			tx_double_buffered;
+	bool			rx_double_buffered;
+	u16			max_packet_sz_tx;
+	u16			max_packet_sz_rx;
+
+	struct dma_channel	*tx_channel;
+	struct dma_channel	*rx_channel;
+
+#ifdef CONFIG_USB_TUSB6010
+	/* TUSB has "asynchronous" and "synchronous" dma modes */
+	dma_addr_t		fifo_async;
+	dma_addr_t		fifo_sync;
+	void __iomem		*fifo_sync_va;
+#endif
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	void __iomem		*target_regs;
+
+	/* currently scheduled peripheral endpoint */
+	struct musb_qh		*in_qh;
+	struct musb_qh		*out_qh;
+
+	u8			rx_reinit;
+	u8			tx_reinit;
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	/* peripheral side */
+	struct musb_ep		ep_in;			/* TX */
+	struct musb_ep		ep_out;			/* RX */
+#endif
+};
+
+static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep)
+{
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	return next_request(&hw_ep->ep_in);
+#else
+	return NULL;
+#endif
+}
+
+static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
+{
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	return next_request(&hw_ep->ep_out);
+#else
+	return NULL;
+#endif
+}
+
+/*
+ * struct musb - Driver instance data.
+ */
+struct musb {
+	/* device lock */
+	spinlock_t		lock;
+	struct clk		*clock;
+	irqreturn_t		(*isr)(int, void *);
+	struct work_struct	irq_work;
+
+/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
+#define MUSB_PORT_STAT_RESUME	(1 << 31)
+
+	u32			port1_status;
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	unsigned long		rh_timer;
+
+	enum musb_h_ep0_state	ep0_stage;
+
+	/* bulk traffic normally dedicates endpoint hardware, and each
+	 * direction has its own ring of host side endpoints.
+	 * we try to progress the transfer at the head of each endpoint's
+	 * queue until it completes or NAKs too much; then we try the next
+	 * endpoint.
+	 */
+	struct musb_hw_ep	*bulk_ep;
+
+	struct list_head	control;	/* of musb_qh */
+	struct list_head	in_bulk;	/* of musb_qh */
+	struct list_head	out_bulk;	/* of musb_qh */
+	struct musb_qh		*periodic[32];	/* tree of interrupt+iso */
+#endif
+
+	/* called with IRQs blocked; ON/nonzero implies starting a session,
+	 * and waiting at least a_wait_vrise_tmout.
+	 */
+	void			(*board_set_vbus)(struct musb *, int is_on);
+
+	struct dma_controller	*dma_controller;
+
+	struct device		*controller;
+	void __iomem		*ctrl_base;
+	void __iomem		*mregs;
+
+#ifdef CONFIG_USB_TUSB6010
+	dma_addr_t		async;
+	dma_addr_t		sync;
+	void __iomem		*sync_va;
+#endif
+
+	/* passed down from chip/board specific irq handlers */
+	u8			int_usb;
+	u16			int_rx;
+	u16			int_tx;
+
+	struct otg_transceiver	xceiv;
+
+	int nIrq;
+
+	struct musb_hw_ep	 endpoints[MUSB_C_NUM_EPS];
+#define control_ep		endpoints
+
+#define VBUSERR_RETRY_COUNT	3
+	u16			vbuserr_retry;
+	u16 epmask;
+	u8 nr_endpoints;
+
+	u8 board_mode;		/* enum musb_mode */
+	int			(*board_set_power)(int state);
+
+	int			(*set_clock)(struct clk *clk, int is_active);
+
+	u8			min_power;	/* vbus for periph, in mA/2 */
+
+	bool			is_host;
+
+	int			a_wait_bcon;	/* VBUS timeout in msecs */
+	unsigned long		idle_timeout;	/* Next timeout in jiffies */
+
+	/* active means connected and not suspended */
+	unsigned		is_active:1;
+
+	unsigned is_multipoint:1;
+	unsigned ignore_disconnect:1;	/* during bus resets */
+
+#ifdef C_MP_TX
+	unsigned bulk_split:1;
+#define	can_bulk_split(musb,type) \
+		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
+#else
+#define	can_bulk_split(musb, type)	0
+#endif
+
+#ifdef C_MP_RX
+	unsigned bulk_combine:1;
+#define	can_bulk_combine(musb,type) \
+		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
+#else
+#define	can_bulk_combine(musb, type)	0
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	/* is_suspended means USB B_PERIPHERAL suspend */
+	unsigned		is_suspended:1;
+
+	/* may_wakeup means remote wakeup is enabled */
+	unsigned		may_wakeup:1;
+
+	/* is_self_powered is reported in device status and the
+	 * config descriptor.  is_bus_powered means B_PERIPHERAL
+	 * draws some VBUS current; both can be true.
+	 */
+	unsigned		is_self_powered:1;
+	unsigned		is_bus_powered:1;
+
+	unsigned		set_address:1;
+	unsigned		test_mode:1;
+	unsigned		softconnect:1;
+
+	u8			address;
+	u8			test_mode_nr;
+	u16			ackpend;		/* ep0 */
+	enum musb_g_ep0_state	ep0_state;
+	struct usb_gadget	g;			/* the gadget */
+	struct usb_gadget_driver *gadget_driver;	/* its driver */
+#endif
+
+	struct musb_hdrc_config	*config;
+
+#ifdef MUSB_CONFIG_PROC_FS
+	struct proc_dir_entry *proc_entry;
+#endif
+};
+
+static inline void musb_set_vbus(struct musb *musb, int is_on)
+{
+	musb->board_set_vbus(musb, is_on);
+}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+static inline struct musb *gadget_to_musb(struct usb_gadget *g)
+{
+	return container_of(g, struct musb, g);
+}
+#endif
+
+
+/***************************** Glue it together *****************************/
+
+extern const char musb_driver_name[];
+
+extern void musb_start(struct musb *musb);
+extern void musb_stop(struct musb *musb);
+
+extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
+extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
+
+extern void musb_load_testpacket(struct musb *);
+
+extern irqreturn_t musb_interrupt(struct musb *);
+
+extern void musb_platform_enable(struct musb *musb);
+extern void musb_platform_disable(struct musb *musb);
+
+extern void musb_hnp_stop(struct musb *musb);
+
+extern void musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
+#else
+#define musb_platform_try_idle(x, y)		do {} while (0)
+#endif
+
+#ifdef CONFIG_USB_TUSB6010
+extern int musb_platform_get_vbus_status(struct musb *musb);
+#else
+#define musb_platform_get_vbus_status(x)	0
+#endif
+
+extern int __init musb_platform_init(struct musb *musb);
+extern int musb_platform_exit(struct musb *musb);
+
+#endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
new file mode 100644
index 00000000000..4d2794441b1
--- /dev/null
+++ b/drivers/usb/musb/musb_debug.h
@@ -0,0 +1,62 @@
+/*
+ * MUSB OTG driver debug defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_DEBUG_H__
+#define __MUSB_LINUX_DEBUG_H__
+
+#define yprintk(facility, format, args...) \
+	do { printk(facility "%s %d: " format , \
+	__func__, __LINE__ , ## args); } while (0)
+#define WARNING(fmt, args...) yprintk(KERN_WARNING, fmt, ## args)
+#define INFO(fmt, args...) yprintk(KERN_INFO, fmt, ## args)
+#define ERR(fmt, args...) yprintk(KERN_ERR, fmt, ## args)
+
+#define xprintk(level, facility, format, args...) do { \
+	if (_dbg_level(level)) { \
+		printk(facility "%s %d: " format , \
+				__func__, __LINE__ , ## args); \
+	} } while (0)
+
+extern unsigned debug;
+
+static inline int _dbg_level(unsigned l)
+{
+	return debug >= l;
+}
+
+#define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args)
+
+extern const char *otg_state_string(struct musb *);
+
+#endif				/*  __MUSB_LINUX_DEBUG_H__ */
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
new file mode 100644
index 00000000000..0a2c4e3602c
--- /dev/null
+++ b/drivers/usb/musb/musb_dma.h
@@ -0,0 +1,172 @@
+/*
+ * MUSB OTG driver DMA controller abstraction
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_DMA_H__
+#define __MUSB_DMA_H__
+
+struct musb_hw_ep;
+
+/*
+ * DMA Controller Abstraction
+ *
+ * DMA Controllers are abstracted to allow use of a variety of different
+ * implementations of DMA, as allowed by the Inventra USB cores.  On the
+ * host side, usbcore sets up the DMA mappings and flushes caches; on the
+ * peripheral side, the gadget controller driver does.  Responsibilities
+ * of a DMA controller driver include:
+ *
+ *  - Handling the details of moving multiple USB packets
+ *    in cooperation with the Inventra USB core, including especially
+ *    the correct RX side treatment of short packets and buffer-full
+ *    states (both of which terminate transfers).
+ *
+ *  - Knowing the correlation between dma channels and the
+ *    Inventra core's local endpoint resources and data direction.
+ *
+ *  - Maintaining a list of allocated/available channels.
+ *
+ *  - Updating channel status on interrupts,
+ *    whether shared with the Inventra core or separate.
+ */
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+#define	is_dma_capable()	(1)
+#else
+#define	is_dma_capable()	(0)
+#endif
+
+#ifdef CONFIG_USB_TI_CPPI_DMA
+#define	is_cppi_enabled()	1
+#else
+#define	is_cppi_enabled()	0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()			1
+#else
+#define tusb_dma_omap()			0
+#endif
+
+/*
+ * DMA channel status ... updated by the dma controller driver whenever that
+ * status changes, and protected by the overall controller spinlock.
+ */
+enum dma_channel_status {
+	/* unallocated */
+	MUSB_DMA_STATUS_UNKNOWN,
+	/* allocated ... but not busy, no errors */
+	MUSB_DMA_STATUS_FREE,
+	/* busy ... transactions are active */
+	MUSB_DMA_STATUS_BUSY,
+	/* transaction(s) aborted due to ... dma or memory bus error */
+	MUSB_DMA_STATUS_BUS_ABORT,
+	/* transaction(s) aborted due to ... core error or USB fault */
+	MUSB_DMA_STATUS_CORE_ABORT
+};
+
+struct dma_controller;
+
+/**
+ * struct dma_channel - A DMA channel.
+ * @private_data: channel-private data
+ * @max_len: the maximum number of bytes the channel can move in one
+ *	transaction (typically representing many USB maximum-sized packets)
+ * @actual_len: how many bytes have been transferred
+ * @status: current channel status (updated e.g. on interrupt)
+ * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
+ *
+ * channels are associated with an endpoint for the duration of at least
+ * one usb transfer.
+ */
+struct dma_channel {
+	void			*private_data;
+	/* FIXME not void* private_data, but a dma_controller * */
+	size_t			max_len;
+	size_t			actual_len;
+	enum dma_channel_status	status;
+	bool			desired_mode;
+};
+
+/*
+ * dma_channel_status - return status of dma channel
+ * @c: the channel
+ *
+ * Returns the software's view of the channel status.  If that status is BUSY
+ * then it's possible that the hardware has completed (or aborted) a transfer,
+ * so the driver needs to update that status.
+ */
+static inline enum dma_channel_status
+dma_channel_status(struct dma_channel *c)
+{
+	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/**
+ * struct dma_controller - A DMA Controller.
+ * @start: call this to start a DMA controller;
+ *	return 0 on success, else negative errno
+ * @stop: call this to stop a DMA controller
+ *	return 0 on success, else negative errno
+ * @channel_alloc: call this to allocate a DMA channel
+ * @channel_release: call this to release a DMA channel
+ * @channel_abort: call this to abort a pending DMA transaction,
+ *	returning it to FREE (but allocated) state
+ *
+ * Controllers manage dma channels.
+ */
+struct dma_controller {
+	int			(*start)(struct dma_controller *);
+	int			(*stop)(struct dma_controller *);
+	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
+					struct musb_hw_ep *, u8 is_tx);
+	void			(*channel_release)(struct dma_channel *);
+	int			(*channel_program)(struct dma_channel *channel,
+							u16 maxpacket, u8 mode,
+							dma_addr_t dma_addr,
+							u32 length);
+	int			(*channel_abort)(struct dma_channel *);
+};
+
+/* called after channel_program(), may indicate a fault */
+extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
+
+
+extern struct dma_controller *__init
+dma_controller_create(struct musb *, void __iomem *);
+
+extern void dma_controller_destroy(struct dma_controller *);
+
+#endif	/* __MUSB_DMA_H__ */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
new file mode 100644
index 00000000000..d6a802c224f
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.c
@@ -0,0 +1,2031 @@
+/*
+ * MUSB OTG driver peripheral support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/moduleparam.h>
+#include <linux/stat.h>
+#include <linux/dma-mapping.h>
+
+#include "musb_core.h"
+
+
+/* MUSB PERIPHERAL status 3-mar-2006:
+ *
+ * - EP0 seems solid.  It passes both USBCV and usbtest control cases.
+ *   Minor glitches:
+ *
+ *     + remote wakeup to Linux hosts work, but saw USBCV failures;
+ *       in one test run (operator error?)
+ *     + endpoint halt tests -- in both usbtest and usbcv -- seem
+ *       to break when dma is enabled ... is something wrongly
+ *       clearing SENDSTALL?
+ *
+ * - Mass storage behaved ok when last tested.  Network traffic patterns
+ *   (with lots of short transfers etc) need retesting; they turn up the
+ *   worst cases of the DMA, since short packets are typical but are not
+ *   required.
+ *
+ * - TX/IN
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + no cppi throughput issues other than no-hw-queueing
+ *     + failed with FLAT_REG (DaVinci)
+ *     + seems to behave with double buffering, PIO -and- CPPI
+ *     + with gadgetfs + AIO, requests got lost?
+ *
+ * - RX/OUT
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + dma is slow in typical case (short_not_ok is clear)
+ *     + double buffering ok with PIO
+ *     + double buffering *FAILS* with CPPI, wrong data bytes sometimes
+ *     + request lossage observed with gadgetfs
+ *
+ * - ISO not tested ... might work, but only weakly isochronous
+ *
+ * - Gadget driver disabling of softconnect during bind() is ignored; so
+ *   drivers can't hold off host requests until userspace is ready.
+ *   (Workaround:  they can turn it off later.)
+ *
+ * - PORTABILITY (assumes PIO works):
+ *     + DaVinci, basically works with cppi dma
+ *     + OMAP 2430, ditto with mentor dma
+ *     + TUSB 6010, platform-specific dma in the works
+ */
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Immediately complete a request.
+ *
+ * @param request the request to complete
+ * @param status the status to complete the request with
+ * Context: controller locked, IRQs blocked.
+ */
+void musb_g_giveback(
+	struct musb_ep		*ep,
+	struct usb_request	*request,
+	int			status)
+__releases(ep->musb->lock)
+__acquires(ep->musb->lock)
+{
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			busy = ep->busy;
+
+	req = to_musb_request(request);
+
+	list_del(&request->list);
+	if (req->request.status == -EINPROGRESS)
+		req->request.status = status;
+	musb = req->musb;
+
+	ep->busy = 1;
+	spin_unlock(&musb->lock);
+	if (is_dma_capable()) {
+		if (req->mapped) {
+			dma_unmap_single(musb->controller,
+					req->request.dma,
+					req->request.length,
+					req->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			req->request.dma = DMA_ADDR_INVALID;
+			req->mapped = 0;
+		} else if (req->request.dma != DMA_ADDR_INVALID)
+			dma_sync_single_for_cpu(musb->controller,
+					req->request.dma,
+					req->request.length,
+					req->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+	}
+	if (request->status == 0)
+		DBG(5, "%s done request %p,  %d/%d\n",
+				ep->end_point.name, request,
+				req->request.actual, req->request.length);
+	else
+		DBG(2, "%s request %p, %d/%d fault %d\n",
+				ep->end_point.name, request,
+				req->request.actual, req->request.length,
+				request->status);
+	req->request.complete(&req->ep->end_point, &req->request);
+	spin_lock(&musb->lock);
+	ep->busy = busy;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Abort requests queued to an endpoint using the status. Synchronous.
+ * caller locked controller and blocked irqs, and selected this ep.
+ */
+static void nuke(struct musb_ep *ep, const int status)
+{
+	struct musb_request	*req = NULL;
+	void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs;
+
+	ep->busy = 1;
+
+	if (is_dma_capable() && ep->dma) {
+		struct dma_controller	*c = ep->musb->dma_controller;
+		int value;
+		if (ep->is_in) {
+			musb_writew(epio, MUSB_TXCSR,
+					0 | MUSB_TXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_TXCSR,
+					0 | MUSB_TXCSR_FLUSHFIFO);
+		} else {
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+		}
+
+		value = c->channel_abort(ep->dma);
+		DBG(value ? 1 : 6, "%s: abort DMA --> %d\n", ep->name, value);
+		c->channel_release(ep->dma);
+		ep->dma = NULL;
+	}
+
+	while (!list_empty(&(ep->req_list))) {
+		req = container_of(ep->req_list.next, struct musb_request,
+				request.list);
+		musb_g_giveback(ep, &req->request, status);
+	}
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* Data transfers - pure PIO, pure DMA, or mixed mode */
+
+/*
+ * This assumes the separate CPPI engine is responding to DMA requests
+ * from the usb core ... sequenced a bit differently from mentor dma.
+ */
+
+static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
+{
+	if (can_bulk_split(musb, ep->type))
+		return ep->hw_ep->max_packet_sz_tx;
+	else
+		return ep->packet_sz;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral tx (IN) using Mentor DMA works as follows:
+	Only mode 0 is used for transfers <= wPktSize,
+	mode 1 is used for larger transfers,
+
+	One of the following happens:
+	- Host sends IN token which causes an endpoint interrupt
+		-> TxAvail
+			-> if DMA is currently busy, exit.
+			-> if queue is non-empty, txstate().
+
+	- Request is queued by the gadget driver.
+		-> if queue was previously empty, txstate()
+
+	txstate()
+		-> start
+		  /\	-> setup DMA
+		  |     (data is transferred to the FIFO, then sent out when
+		  |	IN token(s) are recd from Host.
+		  |		-> DMA interrupt on completion
+		  |		   calls TxAvail.
+		  |		      -> stop DMA, ~DmaEenab,
+		  |		      -> set TxPktRdy for last short pkt or zlp
+		  |		      -> Complete Request
+		  |		      -> Continue next request (call txstate)
+		  |___________________________________|
+
+ * Non-Mentor DMA engines can of course work differently, such as by
+ * upleveling from irq-per-packet to irq-per-buffer.
+ */
+
+#endif
+
+/*
+ * An endpoint is transmitting data. This can be called either from
+ * the IRQ routine or from ep.queue() to kickstart a request on an
+ * endpoint.
+ *
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void txstate(struct musb *musb, struct musb_request *req)
+{
+	u8			epnum = req->epnum;
+	struct musb_ep		*musb_ep;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct usb_request	*request;
+	u16			fifo_count = 0, csr;
+	int			use_dma = 0;
+
+	musb_ep = req->ep;
+
+	/* we shouldn't get here while DMA is active ... but we do ... */
+	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+		DBG(4, "dma pending...\n");
+		return;
+	}
+
+	/* read TXCSR before */
+	csr = musb_readw(epio, MUSB_TXCSR);
+
+	request = &req->request;
+	fifo_count = min(max_ep_writesize(musb, musb_ep),
+			(int)(request->length - request->actual));
+
+	if (csr & MUSB_TXCSR_TXPKTRDY) {
+		DBG(5, "%s old packet still ready , txcsr %03x\n",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	if (csr & MUSB_TXCSR_P_SENDSTALL) {
+		DBG(5, "%s stalling, txcsr %03x\n",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	DBG(4, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
+			epnum, musb_ep->packet_sz, fifo_count,
+			csr);
+
+#ifndef	CONFIG_MUSB_PIO_ONLY
+	if (is_dma_capable() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		use_dma = (request->dma != DMA_ADDR_INVALID);
+
+		/* MUSB_TXCSR_P_ISO is still set correctly */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		{
+			size_t request_size;
+
+			/* setup DMA, then program endpoint CSR */
+			request_size = min(request->length,
+						musb_ep->dma->max_len);
+			if (request_size <= musb_ep->packet_sz)
+				musb_ep->dma->desired_mode = 0;
+			else
+				musb_ep->dma->desired_mode = 1;
+
+			use_dma = use_dma && c->channel_program(
+					musb_ep->dma, musb_ep->packet_sz,
+					musb_ep->dma->desired_mode,
+					request->dma, request_size);
+			if (use_dma) {
+				if (musb_ep->dma->desired_mode == 0) {
+					/* ASSERT: DMAENAB is clear */
+					csr &= ~(MUSB_TXCSR_AUTOSET |
+							MUSB_TXCSR_DMAMODE);
+					csr |= (MUSB_TXCSR_DMAENAB |
+							MUSB_TXCSR_MODE);
+					/* against programming guide */
+				} else
+					csr |= (MUSB_TXCSR_AUTOSET
+							| MUSB_TXCSR_DMAENAB
+							| MUSB_TXCSR_DMAMODE
+							| MUSB_TXCSR_MODE);
+
+				csr &= ~MUSB_TXCSR_P_UNDERRUN;
+				musb_writew(epio, MUSB_TXCSR, csr);
+			}
+		}
+
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+		/* program endpoint CSR first, then setup DMA */
+		csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_P_UNDERRUN
+				| MUSB_TXCSR_TXPKTRDY);
+		csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
+		musb_writew(epio, MUSB_TXCSR,
+			(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
+				| csr);
+
+		/* ensure writebuffer is empty */
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* NOTE host side sets DMAENAB later than this; both are
+		 * OK since the transfer dma glue (between CPPI and Mentor
+		 * fifos) just tells CPPI it could start.  Data only moves
+		 * to the USB TX fifo when both fifos are ready.
+		 */
+
+		/* "mode" is irrelevant here; handle terminating ZLPs like
+		 * PIO does, since the hardware RNDIS mode seems unreliable
+		 * except for the last-packet-is-already-short case.
+		 */
+		use_dma = use_dma && c->channel_program(
+				musb_ep->dma, musb_ep->packet_sz,
+				0,
+				request->dma,
+				request->length);
+		if (!use_dma) {
+			c->channel_release(musb_ep->dma);
+			musb_ep->dma = NULL;
+			/* ASSERT: DMAENAB clear */
+			csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+			/* invariant: prequest->buf is non-null */
+		}
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+		use_dma = use_dma && c->channel_program(
+				musb_ep->dma, musb_ep->packet_sz,
+				request->zero,
+				request->dma,
+				request->length);
+#endif
+	}
+#endif
+
+	if (!use_dma) {
+		musb_write_fifo(musb_ep->hw_ep, fifo_count,
+				(u8 *) (request->buf + request->actual));
+		request->actual += fifo_count;
+		csr |= MUSB_TXCSR_TXPKTRDY;
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	}
+
+	/* host may already have the data when this message shows... */
+	DBG(3, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
+			musb_ep->end_point.name, use_dma ? "dma" : "pio",
+			request->actual, request->length,
+			musb_readw(epio, MUSB_TXCSR),
+			fifo_count,
+			musb_readw(epio, MUSB_TXMAXP));
+}
+
+/*
+ * FIFO state update (e.g. data ready).
+ * Called from IRQ,  with controller locked.
+ */
+void musb_g_tx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct usb_request	*request;
+	u8 __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_in;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+	request = next_request(musb_ep);
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	DBG(4, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
+
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+	do {
+		/* REVISIT for high bandwidth, MUSB_TXCSR_P_INCOMPTX
+		 * probably rates reporting as a host error
+		 */
+		if (csr & MUSB_TXCSR_P_SENTSTALL) {
+			csr |= MUSB_TXCSR_P_WZC_BITS;
+			csr &= ~MUSB_TXCSR_P_SENTSTALL;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+				dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+				musb->dma_controller->channel_abort(dma);
+			}
+
+			if (request)
+				musb_g_giveback(musb_ep, request, -EPIPE);
+
+			break;
+		}
+
+		if (csr & MUSB_TXCSR_P_UNDERRUN) {
+			/* we NAKed, no big deal ... little reason to care */
+			csr |= MUSB_TXCSR_P_WZC_BITS;
+			csr &= ~(MUSB_TXCSR_P_UNDERRUN
+					| MUSB_TXCSR_TXPKTRDY);
+			musb_writew(epio, MUSB_TXCSR, csr);
+			DBG(20, "underrun on ep%d, req %p\n", epnum, request);
+		}
+
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			/* SHOULD NOT HAPPEN ... has with cppi though, after
+			 * changing SENDSTALL (and other cases); harmless?
+			 */
+			DBG(5, "%s dma still busy?\n", musb_ep->end_point.name);
+			break;
+		}
+
+		if (request) {
+			u8	is_dma = 0;
+
+			if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
+				is_dma = 1;
+				csr |= MUSB_TXCSR_P_WZC_BITS;
+				csr &= ~(MUSB_TXCSR_DMAENAB
+						| MUSB_TXCSR_P_UNDERRUN
+						| MUSB_TXCSR_TXPKTRDY);
+				musb_writew(epio, MUSB_TXCSR, csr);
+				/* ensure writebuffer is empty */
+				csr = musb_readw(epio, MUSB_TXCSR);
+				request->actual += musb_ep->dma->actual_len;
+				DBG(4, "TXCSR%d %04x, dma off, "
+						"len %zu, req %p\n",
+					epnum, csr,
+					musb_ep->dma->actual_len,
+					request);
+			}
+
+			if (is_dma || request->actual == request->length) {
+
+				/* First, maybe a terminating short packet.
+				 * Some DMA engines might handle this by
+				 * themselves.
+				 */
+				if ((request->zero
+						&& request->length
+						&& (request->length
+							% musb_ep->packet_sz)
+							== 0)
+#ifdef CONFIG_USB_INVENTRA_DMA
+					|| (is_dma &&
+						((!dma->desired_mode) ||
+						    (request->actual &
+						    (musb_ep->packet_sz - 1))))
+#endif
+				) {
+					/* on dma completion, fifo may not
+					 * be available yet ...
+					 */
+					if (csr & MUSB_TXCSR_TXPKTRDY)
+						break;
+
+					DBG(4, "sending zero pkt\n");
+					musb_writew(epio, MUSB_TXCSR,
+							MUSB_TXCSR_MODE
+							| MUSB_TXCSR_TXPKTRDY);
+					request->zero = 0;
+				}
+
+				/* ... or if not, then complete it */
+				musb_g_giveback(musb_ep, request, 0);
+
+				/* kickstart next transfer if appropriate;
+				 * the packet that just completed might not
+				 * be transmitted for hours or days.
+				 * REVISIT for double buffering...
+				 * FIXME revisit for stalls too...
+				 */
+				musb_ep_select(mbase, epnum);
+				csr = musb_readw(epio, MUSB_TXCSR);
+				if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+					break;
+				request = musb_ep->desc
+						? next_request(musb_ep)
+						: NULL;
+				if (!request) {
+					DBG(4, "%s idle now\n",
+						musb_ep->end_point.name);
+					break;
+				}
+			}
+
+			txstate(musb, to_musb_request(request));
+		}
+
+	} while (0);
+}
+
+/* ------------------------------------------------------------ */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral rx (OUT) using Mentor DMA works as follows:
+	- Only mode 0 is used.
+
+	- Request is queued by the gadget class driver.
+		-> if queue was previously empty, rxstate()
+
+	- Host sends OUT token which causes an endpoint interrupt
+	  /\      -> RxReady
+	  |	      -> if request queued, call rxstate
+	  |		/\	-> setup DMA
+	  |		|	     -> DMA interrupt on completion
+	  |		|		-> RxReady
+	  |		|		      -> stop DMA
+	  |		|		      -> ack the read
+	  |		|		      -> if data recd = max expected
+	  |		|				by the request, or host
+	  |		|				sent a short packet,
+	  |		|				complete the request,
+	  |		|				and start the next one.
+	  |		|_____________________________________|
+	  |					 else just wait for the host
+	  |					    to send the next OUT token.
+	  |__________________________________________________|
+
+ * Non-Mentor DMA engines can of course work differently.
+ */
+
+#endif
+
+/*
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void rxstate(struct musb *musb, struct musb_request *req)
+{
+	u16			csr = 0;
+	const u8		epnum = req->epnum;
+	struct usb_request	*request = &req->request;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	u16			fifo_count = 0;
+	u16			len = musb_ep->packet_sz;
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+
+	if (is_cppi_enabled() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+		struct dma_channel	*channel = musb_ep->dma;
+
+		/* NOTE:  CPPI won't actually stop advancing the DMA
+		 * queue after short packet transfers, so this is almost
+		 * always going to run as IRQ-per-packet DMA so that
+		 * faults will be handled correctly.
+		 */
+		if (c->channel_program(channel,
+				musb_ep->packet_sz,
+				!request->short_not_ok,
+				request->dma + request->actual,
+				request->length - request->actual)) {
+
+			/* make sure that if an rxpkt arrived after the irq,
+			 * the cppi engine will be ready to take it as soon
+			 * as DMA is enabled
+			 */
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR
+					| MUSB_RXCSR_DMAMODE);
+			csr |= MUSB_RXCSR_DMAENAB | MUSB_RXCSR_P_WZC_BITS;
+			musb_writew(epio, MUSB_RXCSR, csr);
+			return;
+		}
+	}
+
+	if (csr & MUSB_RXCSR_RXPKTRDY) {
+		len = musb_readw(epio, MUSB_RXCOUNT);
+		if (request->actual < request->length) {
+#ifdef CONFIG_USB_INVENTRA_DMA
+			if (is_dma_capable() && musb_ep->dma) {
+				struct dma_controller	*c;
+				struct dma_channel	*channel;
+				int			use_dma = 0;
+
+				c = musb->dma_controller;
+				channel = musb_ep->dma;
+
+	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+	 * mode 0 only. So we do not get endpoint interrupts due to DMA
+	 * completion. We only get interrupts from DMA controller.
+	 *
+	 * We could operate in DMA mode 1 if we knew the size of the tranfer
+	 * in advance. For mass storage class, request->length = what the host
+	 * sends, so that'd work.  But for pretty much everything else,
+	 * request->length is routinely more than what the host sends. For
+	 * most these gadgets, end of is signified either by a short packet,
+	 * or filling the last byte of the buffer.  (Sending extra data in
+	 * that last pckate should trigger an overflow fault.)  But in mode 1,
+	 * we don't get DMA completion interrrupt for short packets.
+	 *
+	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+	 * to get endpoint interrupt on every DMA req, but that didn't seem
+	 * to work reliably.
+	 *
+	 * REVISIT an updated g_file_storage can set req->short_not_ok, which
+	 * then becomes usable as a runtime "use mode 1" hint...
+	 */
+
+				csr |= MUSB_RXCSR_DMAENAB;
+#ifdef USE_MODE1
+				csr |= MUSB_RXCSR_AUTOCLEAR;
+				/* csr |= MUSB_RXCSR_DMAMODE; */
+
+				/* this special sequence (enabling and then
+				 * disabling MUSB_RXCSR_DMAMODE) is required
+				 * to get DMAReq to activate
+				 */
+				musb_writew(epio, MUSB_RXCSR,
+					csr | MUSB_RXCSR_DMAMODE);
+#endif
+				musb_writew(epio, MUSB_RXCSR, csr);
+
+				if (request->actual < request->length) {
+					int transfer_size = 0;
+#ifdef USE_MODE1
+					transfer_size = min(request->length,
+							channel->max_len);
+#else
+					transfer_size = len;
+#endif
+					if (transfer_size <= musb_ep->packet_sz)
+						musb_ep->dma->desired_mode = 0;
+					else
+						musb_ep->dma->desired_mode = 1;
+
+					use_dma = c->channel_program(
+							channel,
+							musb_ep->packet_sz,
+							channel->desired_mode,
+							request->dma
+							+ request->actual,
+							transfer_size);
+				}
+
+				if (use_dma)
+					return;
+			}
+#endif	/* Mentor's DMA */
+
+			fifo_count = request->length - request->actual;
+			DBG(3, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
+					musb_ep->end_point.name,
+					len, fifo_count,
+					musb_ep->packet_sz);
+
+			fifo_count = min(len, fifo_count);
+
+#ifdef	CONFIG_USB_TUSB_OMAP_DMA
+			if (tusb_dma_omap() && musb_ep->dma) {
+				struct dma_controller *c = musb->dma_controller;
+				struct dma_channel *channel = musb_ep->dma;
+				u32 dma_addr = request->dma + request->actual;
+				int ret;
+
+				ret = c->channel_program(channel,
+						musb_ep->packet_sz,
+						channel->desired_mode,
+						dma_addr,
+						fifo_count);
+				if (ret)
+					return;
+			}
+#endif
+
+			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
+					(request->buf + request->actual));
+			request->actual += fifo_count;
+
+			/* REVISIT if we left anything in the fifo, flush
+			 * it and report -EOVERFLOW
+			 */
+
+			/* ack the read! */
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+	}
+
+	/* reach the end or short packet detected */
+	if (request->actual == request->length || len < musb_ep->packet_sz)
+		musb_g_giveback(musb_ep, request, 0);
+}
+
+/*
+ * Data ready for a request; called from IRQ
+ */
+void musb_g_rx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct usb_request	*request;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+
+	request = next_request(musb_ep);
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+
+	DBG(4, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
+			csr, dma ? " (dma)" : "", request);
+
+	if (csr & MUSB_RXCSR_P_SENTSTALL) {
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			request->actual += musb_ep->dma->actual_len;
+		}
+
+		csr |= MUSB_RXCSR_P_WZC_BITS;
+		csr &= ~MUSB_RXCSR_P_SENTSTALL;
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		if (request)
+			musb_g_giveback(musb_ep, request, -EPIPE);
+		goto done;
+	}
+
+	if (csr & MUSB_RXCSR_P_OVERRUN) {
+		/* csr |= MUSB_RXCSR_P_WZC_BITS; */
+		csr &= ~MUSB_RXCSR_P_OVERRUN;
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		DBG(3, "%s iso overrun on %p\n", musb_ep->name, request);
+		if (request && request->status == -EINPROGRESS)
+			request->status = -EOVERFLOW;
+	}
+	if (csr & MUSB_RXCSR_INCOMPRX) {
+		/* REVISIT not necessarily an error */
+		DBG(4, "%s, incomprx\n", musb_ep->end_point.name);
+	}
+
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		/* "should not happen"; likely RXPKTRDY pending for DMA */
+		DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1,
+			"%s busy, csr %04x\n",
+			musb_ep->end_point.name, csr);
+		goto done;
+	}
+
+	if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR
+				| MUSB_RXCSR_DMAENAB
+				| MUSB_RXCSR_DMAMODE);
+		musb_writew(epio, MUSB_RXCSR,
+			MUSB_RXCSR_P_WZC_BITS | csr);
+
+		request->actual += musb_ep->dma->actual_len;
+
+		DBG(4, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
+			epnum, csr,
+			musb_readw(epio, MUSB_RXCSR),
+			musb_ep->dma->actual_len, request);
+
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
+		/* Autoclear doesn't clear RxPktRdy for short packets */
+		if ((dma->desired_mode == 0)
+				|| (dma->actual_len
+					& (musb_ep->packet_sz - 1))) {
+			/* ack the read! */
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+
+		/* incomplete, and not short? wait for next IN packet */
+		if ((request->actual < request->length)
+				&& (musb_ep->dma->actual_len
+					== musb_ep->packet_sz))
+			goto done;
+#endif
+		musb_g_giveback(musb_ep, request, 0);
+
+		request = next_request(musb_ep);
+		if (!request)
+			goto done;
+
+		/* don't start more i/o till the stall clears */
+		musb_ep_select(mbase, epnum);
+		csr = musb_readw(epio, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_P_SENDSTALL)
+			goto done;
+	}
+
+
+	/* analyze request if the ep is hot */
+	if (request)
+		rxstate(musb, to_musb_request(request));
+	else
+		DBG(3, "packet waiting for %s%s request\n",
+				musb_ep->desc ? "" : "inactive ",
+				musb_ep->end_point.name);
+
+done:
+	return;
+}
+
+/* ------------------------------------------------------------ */
+
+static int musb_gadget_enable(struct usb_ep *ep,
+			const struct usb_endpoint_descriptor *desc)
+{
+	unsigned long		flags;
+	struct musb_ep		*musb_ep;
+	struct musb_hw_ep	*hw_ep;
+	void __iomem		*regs;
+	struct musb		*musb;
+	void __iomem	*mbase;
+	u8		epnum;
+	u16		csr;
+	unsigned	tmp;
+	int		status = -EINVAL;
+
+	if (!ep || !desc)
+		return -EINVAL;
+
+	musb_ep = to_musb_ep(ep);
+	hw_ep = musb_ep->hw_ep;
+	regs = hw_ep->regs;
+	musb = musb_ep->musb;
+	mbase = musb->mregs;
+	epnum = musb_ep->current_epnum;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_ep->desc) {
+		status = -EBUSY;
+		goto fail;
+	}
+	musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* check direction and (later) maxpacket size against endpoint */
+	if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+		goto fail;
+
+	/* REVISIT this rules out high bandwidth periodic transfers */
+	tmp = le16_to_cpu(desc->wMaxPacketSize);
+	if (tmp & ~0x07ff)
+		goto fail;
+	musb_ep->packet_sz = tmp;
+
+	/* enable the interrupts for the endpoint, set the endpoint
+	 * packet size (or fail), set the mode, clear the fifo
+	 */
+	musb_ep_select(mbase, epnum);
+	if (desc->bEndpointAddress & USB_DIR_IN) {
+		u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 1;
+		if (!musb_ep->is_in)
+			goto fail;
+		if (tmp > hw_ep->max_packet_sz_tx)
+			goto fail;
+
+		int_txe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+		/* REVISIT if can_bulk_split(), use by updating "tmp";
+		 * likewise high bandwidth periodic tx
+		 */
+		musb_writew(regs, MUSB_TXMAXP, tmp);
+
+		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
+		if (musb_readw(regs, MUSB_TXCSR)
+				& MUSB_TXCSR_FIFONOTEMPTY)
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_TXCSR_P_ISO;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_TXCSR, csr);
+		/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+		musb_writew(regs, MUSB_TXCSR, csr);
+
+	} else {
+		u16 int_rxe = musb_readw(mbase, MUSB_INTRRXE);
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 0;
+		if (musb_ep->is_in)
+			goto fail;
+		if (tmp > hw_ep->max_packet_sz_rx)
+			goto fail;
+
+		int_rxe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRRXE, int_rxe);
+
+		/* REVISIT if can_bulk_combine() use by updating "tmp"
+		 * likewise high bandwidth periodic rx
+		 */
+		musb_writew(regs, MUSB_RXMAXP, tmp);
+
+		/* force shared fifo to OUT-only mode */
+		if (hw_ep->is_shared_fifo) {
+			csr = musb_readw(regs, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
+			musb_writew(regs, MUSB_TXCSR, csr);
+		}
+
+		csr = MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_RXCSR_P_ISO;
+		else if (musb_ep->type == USB_ENDPOINT_XFER_INT)
+			csr |= MUSB_RXCSR_DISNYET;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_RXCSR, csr);
+		musb_writew(regs, MUSB_RXCSR, csr);
+	}
+
+	/* NOTE:  all the I/O code _should_ work fine without DMA, in case
+	 * for some reason you run out of channels here.
+	 */
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep->dma = c->channel_alloc(c, hw_ep,
+				(desc->bEndpointAddress & USB_DIR_IN));
+	} else
+		musb_ep->dma = NULL;
+
+	musb_ep->desc = desc;
+	musb_ep->busy = 0;
+	status = 0;
+
+	pr_debug("%s periph: enabled %s for %s %s, %smaxpacket %d\n",
+			musb_driver_name, musb_ep->end_point.name,
+			({ char *s; switch (musb_ep->type) {
+			case USB_ENDPOINT_XFER_BULK:	s = "bulk"; break;
+			case USB_ENDPOINT_XFER_INT:	s = "int"; break;
+			default:			s = "iso"; break;
+			}; s; }),
+			musb_ep->is_in ? "IN" : "OUT",
+			musb_ep->dma ? "dma, " : "",
+			musb_ep->packet_sz);
+
+	schedule_work(&musb->irq_work);
+
+fail:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Disable an endpoint flushing all requests queued.
+ */
+static int musb_gadget_disable(struct usb_ep *ep)
+{
+	unsigned long	flags;
+	struct musb	*musb;
+	u8		epnum;
+	struct musb_ep	*musb_ep;
+	void __iomem	*epio;
+	int		status = 0;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+	epnum = musb_ep->current_epnum;
+	epio = musb->endpoints[epnum].regs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(musb->mregs, epnum);
+
+	/* zero the endpoint sizes */
+	if (musb_ep->is_in) {
+		u16 int_txe = musb_readw(musb->mregs, MUSB_INTRTXE);
+		int_txe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRTXE, int_txe);
+		musb_writew(epio, MUSB_TXMAXP, 0);
+	} else {
+		u16 int_rxe = musb_readw(musb->mregs, MUSB_INTRRXE);
+		int_rxe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRRXE, int_rxe);
+		musb_writew(epio, MUSB_RXMAXP, 0);
+	}
+
+	musb_ep->desc = NULL;
+
+	/* abort all pending DMA and requests */
+	nuke(musb_ep, -ESHUTDOWN);
+
+	schedule_work(&musb->irq_work);
+
+	spin_unlock_irqrestore(&(musb->lock), flags);
+
+	DBG(2, "%s\n", musb_ep->end_point.name);
+
+	return status;
+}
+
+/*
+ * Allocate a request for an endpoint.
+ * Reused by ep0 code.
+ */
+struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct musb_request	*request = NULL;
+
+	request = kzalloc(sizeof *request, gfp_flags);
+	if (request) {
+		INIT_LIST_HEAD(&request->request.list);
+		request->request.dma = DMA_ADDR_INVALID;
+		request->epnum = musb_ep->current_epnum;
+		request->ep = musb_ep;
+	}
+
+	return &request->request;
+}
+
+/*
+ * Free a request
+ * Reused by ep0 code.
+ */
+void musb_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(to_musb_request(req));
+}
+
+static LIST_HEAD(buffers);
+
+struct free_record {
+	struct list_head	list;
+	struct device		*dev;
+	unsigned		bytes;
+	dma_addr_t		dma;
+};
+
+/*
+ * Context: controller locked, IRQs blocked.
+ */
+static void musb_ep_restart(struct musb *musb, struct musb_request *req)
+{
+	DBG(3, "<== %s request %p len %u on hw_ep%d\n",
+		req->tx ? "TX/IN" : "RX/OUT",
+		&req->request, req->request.length, req->epnum);
+
+	musb_ep_select(musb->mregs, req->epnum);
+	if (req->tx)
+		txstate(musb, req);
+	else
+		rxstate(musb, req);
+}
+
+static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
+			gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep;
+	struct musb_request	*request;
+	struct musb		*musb;
+	int			status = 0;
+	unsigned long		lockflags;
+
+	if (!ep || !req)
+		return -EINVAL;
+	if (!req->buf)
+		return -ENODATA;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+
+	request = to_musb_request(req);
+	request->musb = musb;
+
+	if (request->ep != musb_ep)
+		return -EINVAL;
+
+	DBG(4, "<== to %s request=%p\n", ep->name, req);
+
+	/* request is mine now... */
+	request->request.actual = 0;
+	request->request.status = -EINPROGRESS;
+	request->epnum = musb_ep->current_epnum;
+	request->tx = musb_ep->is_in;
+
+	if (is_dma_capable() && musb_ep->dma) {
+		if (request->request.dma == DMA_ADDR_INVALID) {
+			request->request.dma = dma_map_single(
+					musb->controller,
+					request->request.buf,
+					request->request.length,
+					request->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			request->mapped = 1;
+		} else {
+			dma_sync_single_for_device(musb->controller,
+					request->request.dma,
+					request->request.length,
+					request->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			request->mapped = 0;
+		}
+	} else if (!req->buf) {
+		return -ENODATA;
+	} else
+		request->mapped = 0;
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	/* don't queue if the ep is down */
+	if (!musb_ep->desc) {
+		DBG(4, "req %p queued to %s while ep %s\n",
+				req, ep->name, "disabled");
+		status = -ESHUTDOWN;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&(request->request.list), &(musb_ep->req_list));
+
+	/* it this is the head of the queue, start i/o ... */
+	if (!musb_ep->busy && &request->request.list == musb_ep->req_list.next)
+		musb_ep_restart(musb, request);
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct usb_request	*r;
+	unsigned long		flags;
+	int			status = 0;
+	struct musb		*musb = musb_ep->musb;
+
+	if (!ep || !request || to_musb_request(request)->ep != musb_ep)
+		return -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	list_for_each_entry(r, &musb_ep->req_list, list) {
+		if (r == request)
+			break;
+	}
+	if (r != request) {
+		DBG(3, "request %p not queued to %s\n", request, ep->name);
+		status = -EINVAL;
+		goto done;
+	}
+
+	/* if the hardware doesn't have the request, easy ... */
+	if (musb_ep->req_list.next != &request->list || musb_ep->busy)
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+
+	/* ... else abort the dma transfer ... */
+	else if (is_dma_capable() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep_select(musb->mregs, musb_ep->current_epnum);
+		if (c->channel_abort)
+			status = c->channel_abort(musb_ep->dma);
+		else
+			status = -EBUSY;
+		if (status == 0)
+			musb_g_giveback(musb_ep, request, -ECONNRESET);
+	} else {
+		/* NOTE: by sticking to easily tested hardware/driver states,
+		 * we leave counting of in-flight packets imprecise.
+		 */
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+	}
+
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
+ * data but will queue requests.
+ *
+ * exported to ep0 code
+ */
+int musb_gadget_set_halt(struct usb_ep *ep, int value)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	u8			epnum = musb_ep->current_epnum;
+	struct musb		*musb = musb_ep->musb;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	void __iomem		*mbase;
+	unsigned long		flags;
+	u16			csr;
+	struct musb_request	*request = NULL;
+	int			status = 0;
+
+	if (!ep)
+		return -EINVAL;
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if ((USB_ENDPOINT_XFER_ISOC == musb_ep->type)) {
+		status = -EINVAL;
+		goto done;
+	}
+
+	musb_ep_select(mbase, epnum);
+
+	/* cannot portably stall with non-empty FIFO */
+	request = to_musb_request(next_request(musb_ep));
+	if (value && musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+			DBG(3, "%s fifo busy, cannot halt\n", ep->name);
+			spin_unlock_irqrestore(&musb->lock, flags);
+			return -EAGAIN;
+		}
+
+	}
+
+	/* set/clear the stall and toggle bits */
+	DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear");
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+		csr |= MUSB_TXCSR_P_WZC_BITS
+			| MUSB_TXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_TXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_TXCSR_P_SENDSTALL
+				| MUSB_TXCSR_P_SENTSTALL);
+		csr &= ~MUSB_TXCSR_TXPKTRDY;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_P_WZC_BITS
+			| MUSB_RXCSR_FLUSHFIFO
+			| MUSB_RXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_RXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_RXCSR_P_SENDSTALL
+				| MUSB_RXCSR_P_SENTSTALL);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+done:
+
+	/* maybe start the first request in the queue */
+	if (!musb_ep->busy && !value && request) {
+		DBG(3, "restarting the request\n");
+		musb_ep_restart(musb, request);
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+static int musb_gadget_fifo_status(struct usb_ep *ep)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	void __iomem		*epio = musb_ep->hw_ep->regs;
+	int			retval = -EINVAL;
+
+	if (musb_ep->desc && !musb_ep->is_in) {
+		struct musb		*musb = musb_ep->musb;
+		int			epnum = musb_ep->current_epnum;
+		void __iomem		*mbase = musb->mregs;
+		unsigned long		flags;
+
+		spin_lock_irqsave(&musb->lock, flags);
+
+		musb_ep_select(mbase, epnum);
+		/* FIXME return zero unless RXPKTRDY is set */
+		retval = musb_readw(epio, MUSB_RXCOUNT);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+	}
+	return retval;
+}
+
+static void musb_gadget_fifo_flush(struct usb_ep *ep)
+{
+	struct musb_ep	*musb_ep = to_musb_ep(ep);
+	struct musb	*musb = musb_ep->musb;
+	u8		epnum = musb_ep->current_epnum;
+	void __iomem	*epio = musb->endpoints[epnum].regs;
+	void __iomem	*mbase;
+	unsigned long	flags;
+	u16		csr, int_txe;
+
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(mbase, (u8) epnum);
+
+	/* disable interrupts */
+	int_txe = musb_readw(mbase, MUSB_INTRTXE);
+	musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+			csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+			musb_writew(epio, MUSB_TXCSR, csr);
+		}
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_P_WZC_BITS;
+		musb_writew(epio, MUSB_RXCSR, csr);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	/* re-enable interrupt */
+	musb_writew(mbase, MUSB_INTRTXE, int_txe);
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static const struct usb_ep_ops musb_ep_ops = {
+	.enable		= musb_gadget_enable,
+	.disable	= musb_gadget_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_gadget_queue,
+	.dequeue	= musb_gadget_dequeue,
+	.set_halt	= musb_gadget_set_halt,
+	.fifo_status	= musb_gadget_fifo_status,
+	.fifo_flush	= musb_gadget_fifo_flush
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int musb_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	return (int)musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_gadget_wakeup(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	void __iomem	*mregs = musb->mregs;
+	unsigned long	flags;
+	int		status = -EINVAL;
+	u8		power, devctl;
+	int		retries;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_PERIPHERAL:
+		/* NOTE:  OTG state machine doesn't include B_SUSPENDED;
+		 * that's part of the standard usb 1.1 state machine, and
+		 * doesn't affect OTG transitions.
+		 */
+		if (musb->may_wakeup && musb->is_suspended)
+			break;
+		goto done;
+	case OTG_STATE_B_IDLE:
+		/* Start SRP ... OTG not required. */
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		DBG(2, "Sending SRP: devctl: %02x\n", devctl);
+		devctl |= MUSB_DEVCTL_SESSION;
+		musb_writeb(mregs, MUSB_DEVCTL, devctl);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		retries = 100;
+		while (!(devctl & MUSB_DEVCTL_SESSION)) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+		retries = 10000;
+		while (devctl & MUSB_DEVCTL_SESSION) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+
+		/* Block idling for at least 1s */
+		musb_platform_try_idle(musb,
+			jiffies + msecs_to_jiffies(1 * HZ));
+
+		status = 0;
+		goto done;
+	default:
+		DBG(2, "Unhandled wake: %s\n", otg_state_string(musb));
+		goto done;
+	}
+
+	status = 0;
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power |= MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+	DBG(2, "issue wakeup\n");
+
+	/* FIXME do this next chunk in a timer callback, no udelay */
+	mdelay(2);
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power &= ~MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+static int
+musb_gadget_set_self_powered(struct usb_gadget *gadget, int is_selfpowered)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	musb->is_self_powered = !!is_selfpowered;
+	return 0;
+}
+
+static void musb_pullup(struct musb *musb, int is_on)
+{
+	u8 power;
+
+	power = musb_readb(musb->mregs, MUSB_POWER);
+	if (is_on)
+		power |= MUSB_POWER_SOFTCONN;
+	else
+		power &= ~MUSB_POWER_SOFTCONN;
+
+	/* FIXME if on, HdrcStart; if off, HdrcStop */
+
+	DBG(3, "gadget %s D+ pullup %s\n",
+		musb->gadget_driver->function, is_on ? "on" : "off");
+	musb_writeb(musb->mregs, MUSB_POWER, power);
+}
+
+#if 0
+static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	DBG(2, "<= %s =>\n", __func__);
+
+	/*
+	 * FIXME iff driver's softconnect flag is set (as it is during probe,
+	 * though that can clear it), just musb_pullup().
+	 */
+
+	return -EINVAL;
+}
+#endif
+
+static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	if (!musb->xceiv.set_power)
+		return -EOPNOTSUPP;
+	return otg_set_power(&musb->xceiv, mA);
+}
+
+static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	unsigned long	flags;
+
+	is_on = !!is_on;
+
+	/* NOTE: this assumes we are sensing vbus; we'd rather
+	 * not pullup unless the B-session is active.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (is_on != musb->softconnect) {
+		musb->softconnect = is_on;
+		musb_pullup(musb, is_on);
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+static const struct usb_gadget_ops musb_gadget_operations = {
+	.get_frame		= musb_gadget_get_frame,
+	.wakeup			= musb_gadget_wakeup,
+	.set_selfpowered	= musb_gadget_set_self_powered,
+	/* .vbus_session		= musb_gadget_vbus_session, */
+	.vbus_draw		= musb_gadget_vbus_draw,
+	.pullup			= musb_gadget_pullup,
+};
+
+/* ----------------------------------------------------------------------- */
+
+/* Registration */
+
+/* Only this registration code "knows" the rule (from USB standards)
+ * about there being only one external upstream port.  It assumes
+ * all peripheral ports are external...
+ */
+static struct musb *the_gadget;
+
+static void musb_gadget_release(struct device *dev)
+{
+	/* kref_put(WHAT) */
+	dev_dbg(dev, "%s\n", __func__);
+}
+
+
+static void __init
+init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
+{
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+
+	memset(ep, 0, sizeof *ep);
+
+	ep->current_epnum = epnum;
+	ep->musb = musb;
+	ep->hw_ep = hw_ep;
+	ep->is_in = is_in;
+
+	INIT_LIST_HEAD(&ep->req_list);
+
+	sprintf(ep->name, "ep%d%s", epnum,
+			(!epnum || hw_ep->is_shared_fifo) ? "" : (
+				is_in ? "in" : "out"));
+	ep->end_point.name = ep->name;
+	INIT_LIST_HEAD(&ep->end_point.ep_list);
+	if (!epnum) {
+		ep->end_point.maxpacket = 64;
+		ep->end_point.ops = &musb_g_ep0_ops;
+		musb->g.ep0 = &ep->end_point;
+	} else {
+		if (is_in)
+			ep->end_point.maxpacket = hw_ep->max_packet_sz_tx;
+		else
+			ep->end_point.maxpacket = hw_ep->max_packet_sz_rx;
+		ep->end_point.ops = &musb_ep_ops;
+		list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
+	}
+}
+
+/*
+ * Initialize the endpoints exposed to peripheral drivers, with backlinks
+ * to the rest of the driver state.
+ */
+static inline void __init musb_g_init_endpoints(struct musb *musb)
+{
+	u8			epnum;
+	struct musb_hw_ep	*hw_ep;
+	unsigned		count = 0;
+
+	/* intialize endpoint list just once */
+	INIT_LIST_HEAD(&(musb->g.ep_list));
+
+	for (epnum = 0, hw_ep = musb->endpoints;
+			epnum < musb->nr_endpoints;
+			epnum++, hw_ep++) {
+		if (hw_ep->is_shared_fifo /* || !epnum */) {
+			init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0);
+			count++;
+		} else {
+			if (hw_ep->max_packet_sz_tx) {
+				init_peripheral_ep(musb, &hw_ep->ep_in,
+							epnum, 1);
+				count++;
+			}
+			if (hw_ep->max_packet_sz_rx) {
+				init_peripheral_ep(musb, &hw_ep->ep_out,
+							epnum, 0);
+				count++;
+			}
+		}
+	}
+}
+
+/* called once during driver setup to initialize and link into
+ * the driver model; memory is zeroed.
+ */
+int __init musb_gadget_setup(struct musb *musb)
+{
+	int status;
+
+	/* REVISIT minor race:  if (erroneously) setting up two
+	 * musb peripherals at the same time, only the bus lock
+	 * is probably held.
+	 */
+	if (the_gadget)
+		return -EBUSY;
+	the_gadget = musb;
+
+	musb->g.ops = &musb_gadget_operations;
+	musb->g.is_dualspeed = 1;
+	musb->g.speed = USB_SPEED_UNKNOWN;
+
+	/* this "gadget" abstracts/virtualizes the controller */
+	strcpy(musb->g.dev.bus_id, "gadget");
+	musb->g.dev.parent = musb->controller;
+	musb->g.dev.dma_mask = musb->controller->dma_mask;
+	musb->g.dev.release = musb_gadget_release;
+	musb->g.name = musb_driver_name;
+
+	if (is_otg_enabled(musb))
+		musb->g.is_otg = 1;
+
+	musb_g_init_endpoints(musb);
+
+	musb->is_active = 0;
+	musb_platform_try_idle(musb, 0);
+
+	status = device_register(&musb->g.dev);
+	if (status != 0)
+		the_gadget = NULL;
+	return status;
+}
+
+void musb_gadget_cleanup(struct musb *musb)
+{
+	if (musb != the_gadget)
+		return;
+
+	device_unregister(&musb->g.dev);
+	the_gadget = NULL;
+}
+
+/*
+ * Register the gadget driver. Used by gadget drivers when
+ * registering themselves with the controller.
+ *
+ * -EINVAL something went wrong (not driver)
+ * -EBUSY another gadget is already using the controller
+ * -ENOMEM no memeory to perform the operation
+ *
+ * @param driver the gadget driver
+ * @return <0 if error, 0 if everything is fine
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	int retval;
+	unsigned long flags;
+	struct musb *musb = the_gadget;
+
+	if (!driver
+			|| driver->speed != USB_SPEED_HIGH
+			|| !driver->bind
+			|| !driver->setup)
+		return -EINVAL;
+
+	/* driver must be initialized to support peripheral mode */
+	if (!musb || !(musb->board_mode == MUSB_OTG
+				|| musb->board_mode != MUSB_OTG)) {
+		DBG(1, "%s, no dev??\n", __func__);
+		return -ENODEV;
+	}
+
+	DBG(3, "registering driver %s\n", driver->function);
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb->gadget_driver) {
+		DBG(1, "%s is already bound to %s\n",
+				musb_driver_name,
+				musb->gadget_driver->driver.name);
+		retval = -EBUSY;
+	} else {
+		musb->gadget_driver = driver;
+		musb->g.dev.driver = &driver->driver;
+		driver->driver.bus = NULL;
+		musb->softconnect = 1;
+		retval = 0;
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (retval == 0) {
+		retval = driver->bind(&musb->g);
+		if (retval != 0) {
+			DBG(3, "bind to driver %s failed --> %d\n",
+					driver->driver.name, retval);
+			musb->gadget_driver = NULL;
+			musb->g.dev.driver = NULL;
+		}
+
+		spin_lock_irqsave(&musb->lock, flags);
+
+		/* REVISIT always use otg_set_peripheral(), handling
+		 * issues including the root hub one below ...
+		 */
+		musb->xceiv.gadget = &musb->g;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->is_active = 1;
+
+		/* FIXME this ignores the softconnect flag.  Drivers are
+		 * allowed hold the peripheral inactive until for example
+		 * userspace hooks up printer hardware or DSP codecs, so
+		 * hosts only see fully functional devices.
+		 */
+
+		if (!is_otg_enabled(musb))
+			musb_start(musb);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+
+		if (is_otg_enabled(musb)) {
+			DBG(3, "OTG startup...\n");
+
+			/* REVISIT:  funcall to other code, which also
+			 * handles power budgeting ... this way also
+			 * ensures HdrcStart is indirectly called.
+			 */
+			retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+			if (retval < 0) {
+				DBG(1, "add_hcd failed, %d\n", retval);
+				spin_lock_irqsave(&musb->lock, flags);
+				musb->xceiv.gadget = NULL;
+				musb->xceiv.state = OTG_STATE_UNDEFINED;
+				musb->gadget_driver = NULL;
+				musb->g.dev.driver = NULL;
+				spin_unlock_irqrestore(&musb->lock, flags);
+			}
+		}
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
+{
+	int			i;
+	struct musb_hw_ep	*hw_ep;
+
+	/* don't disconnect if it's not connected */
+	if (musb->g.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	else
+		musb->g.speed = USB_SPEED_UNKNOWN;
+
+	/* deactivate the hardware */
+	if (musb->softconnect) {
+		musb->softconnect = 0;
+		musb_pullup(musb, 0);
+	}
+	musb_stop(musb);
+
+	/* killing any outstanding requests will quiesce the driver;
+	 * then report disconnect
+	 */
+	if (driver) {
+		for (i = 0, hw_ep = musb->endpoints;
+				i < musb->nr_endpoints;
+				i++, hw_ep++) {
+			musb_ep_select(musb->mregs, i);
+			if (hw_ep->is_shared_fifo /* || !epnum */) {
+				nuke(&hw_ep->ep_in, -ESHUTDOWN);
+			} else {
+				if (hw_ep->max_packet_sz_tx)
+					nuke(&hw_ep->ep_in, -ESHUTDOWN);
+				if (hw_ep->max_packet_sz_rx)
+					nuke(&hw_ep->ep_out, -ESHUTDOWN);
+			}
+		}
+
+		spin_unlock(&musb->lock);
+		driver->disconnect(&musb->g);
+		spin_lock(&musb->lock);
+	}
+}
+
+/*
+ * Unregister the gadget driver. Used by gadget drivers when
+ * unregistering themselves from the controller.
+ *
+ * @param driver the gadget driver to unregister
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	unsigned long	flags;
+	int		retval = 0;
+	struct musb	*musb = the_gadget;
+
+	if (!driver || !driver->unbind || !musb)
+		return -EINVAL;
+
+	/* REVISIT always use otg_set_peripheral() here too;
+	 * this needs to shut down the OTG engine.
+	 */
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+#ifdef	CONFIG_USB_MUSB_OTG
+	musb_hnp_stop(musb);
+#endif
+
+	if (musb->gadget_driver == driver) {
+
+		(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+		musb->xceiv.state = OTG_STATE_UNDEFINED;
+		stop_activity(musb, driver);
+
+		DBG(3, "unregistering driver %s\n", driver->function);
+		spin_unlock_irqrestore(&musb->lock, flags);
+		driver->unbind(&musb->g);
+		spin_lock_irqsave(&musb->lock, flags);
+
+		musb->gadget_driver = NULL;
+		musb->g.dev.driver = NULL;
+
+		musb->is_active = 0;
+		musb_platform_try_idle(musb, 0);
+	} else
+		retval = -EINVAL;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (is_otg_enabled(musb) && retval == 0) {
+		usb_remove_hcd(musb_to_hcd(musb));
+		/* FIXME we need to be able to register another
+		 * gadget driver here and have everything work;
+		 * that currently misbehaves.
+		 */
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/* ----------------------------------------------------------------------- */
+
+/* lifecycle operations called through plat_uds.c */
+
+void musb_g_resume(struct musb *musb)
+{
+	musb->is_suspended = 0;
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_IDLE:
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_active = 1;
+		if (musb->gadget_driver && musb->gadget_driver->resume) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->resume(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		WARNING("unhandled RESUME transition (%s)\n",
+				otg_state_string(musb));
+	}
+}
+
+/* called when SOF packets stop for 3+ msec */
+void musb_g_suspend(struct musb *musb)
+{
+	u8	devctl;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	DBG(3, "devctl %02x\n", devctl);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_IDLE:
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_suspended = 1;
+		if (musb->gadget_driver && musb->gadget_driver->suspend) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->suspend(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		/* REVISIT if B_HOST, clear DEVCTL.HOSTREQ;
+		 * A_PERIPHERAL may need care too
+		 */
+		WARNING("unhandled SUSPEND transition (%s)\n",
+				otg_state_string(musb));
+	}
+}
+
+/* Called during SRP */
+void musb_g_wakeup(struct musb *musb)
+{
+	musb_gadget_wakeup(&musb->g);
+}
+
+/* called when VBUS drops below session threshold, and in other cases */
+void musb_g_disconnect(struct musb *musb)
+{
+	void __iomem	*mregs = musb->mregs;
+	u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+
+	DBG(3, "devctl %02x\n", devctl);
+
+	/* clear HR */
+	musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
+
+	/* don't draw vbus until new b-default session */
+	(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+	musb->g.speed = USB_SPEED_UNKNOWN;
+	if (musb->gadget_driver && musb->gadget_driver->disconnect) {
+		spin_unlock(&musb->lock);
+		musb->gadget_driver->disconnect(&musb->g);
+		spin_lock(&musb->lock);
+	}
+
+	switch (musb->xceiv.state) {
+	default:
+#ifdef	CONFIG_USB_MUSB_OTG
+		DBG(2, "Unhandled disconnect %s, setting a_idle\n",
+			otg_state_string(musb));
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_HOST:
+#endif
+	case OTG_STATE_B_PERIPHERAL:
+	case OTG_STATE_B_IDLE:
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		break;
+	}
+
+	musb->is_active = 0;
+}
+
+void musb_g_reset(struct musb *musb)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl = musb_readb(mbase, MUSB_DEVCTL);
+	u8		power;
+
+	DBG(3, "<== %s addr=%x driver '%s'\n",
+			(devctl & MUSB_DEVCTL_BDEVICE)
+				? "B-Device" : "A-Device",
+			musb_readb(mbase, MUSB_FADDR),
+			musb->gadget_driver
+				? musb->gadget_driver->driver.name
+				: NULL
+			);
+
+	/* report disconnect, if we didn't already (flushing EP state) */
+	if (musb->g.speed != USB_SPEED_UNKNOWN)
+		musb_g_disconnect(musb);
+
+	/* clear HR */
+	else if (devctl & MUSB_DEVCTL_HR)
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+
+
+	/* what speed did we negotiate? */
+	power = musb_readb(mbase, MUSB_POWER);
+	musb->g.speed = (power & MUSB_POWER_HSMODE)
+			? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+	/* start in USB_STATE_DEFAULT */
+	musb->is_active = 1;
+	musb->is_suspended = 0;
+	MUSB_DEV_MODE(musb);
+	musb->address = 0;
+	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+
+	musb->may_wakeup = 0;
+	musb->g.b_hnp_enable = 0;
+	musb->g.a_alt_hnp_support = 0;
+	musb->g.a_hnp_support = 0;
+
+	/* Normal reset, as B-Device;
+	 * or else after HNP, as A-Device
+	 */
+	if (devctl & MUSB_DEVCTL_BDEVICE) {
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->g.is_a_peripheral = 0;
+	} else if (is_otg_enabled(musb)) {
+		musb->xceiv.state = OTG_STATE_A_PERIPHERAL;
+		musb->g.is_a_peripheral = 1;
+	} else
+		WARN_ON(1);
+
+	/* start with default limits on VBUS power draw */
+	(void) musb_gadget_vbus_draw(&musb->g,
+			is_otg_enabled(musb) ? 8 : 100);
+}
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
new file mode 100644
index 00000000000..59502da9f73
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.h
@@ -0,0 +1,108 @@
+/*
+ * MUSB OTG driver peripheral defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_GADGET_H
+#define __MUSB_GADGET_H
+
+struct musb_request {
+	struct usb_request	request;
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	u8 tx;			/* endpoint direction */
+	u8 epnum;
+	u8 mapped;
+};
+
+static inline struct musb_request *to_musb_request(struct usb_request *req)
+{
+	return req ? container_of(req, struct musb_request, request) : NULL;
+}
+
+extern struct usb_request *
+musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+extern void musb_free_request(struct usb_ep *ep, struct usb_request *req);
+
+
+/*
+ * struct musb_ep - peripheral side view of endpoint rx or tx side
+ */
+struct musb_ep {
+	/* stuff towards the head is basically write-once. */
+	struct usb_ep			end_point;
+	char				name[12];
+	struct musb_hw_ep		*hw_ep;
+	struct musb			*musb;
+	u8				current_epnum;
+
+	/* ... when enabled/disabled ... */
+	u8				type;
+	u8				is_in;
+	u16				packet_sz;
+	const struct usb_endpoint_descriptor	*desc;
+	struct dma_channel		*dma;
+
+	/* later things are modified based on usage */
+	struct list_head		req_list;
+
+	/* true if lock must be dropped but req_list may not be advanced */
+	u8				busy;
+};
+
+static inline struct musb_ep *to_musb_ep(struct usb_ep *ep)
+{
+	return ep ? container_of(ep, struct musb_ep, end_point) : NULL;
+}
+
+static inline struct usb_request *next_request(struct musb_ep *ep)
+{
+	struct list_head	*queue = &ep->req_list;
+
+	if (list_empty(queue))
+		return NULL;
+	return container_of(queue->next, struct usb_request, list);
+}
+
+extern void musb_g_tx(struct musb *musb, u8 epnum);
+extern void musb_g_rx(struct musb *musb, u8 epnum);
+
+extern const struct usb_ep_ops musb_g_ep0_ops;
+
+extern int musb_gadget_setup(struct musb *);
+extern void musb_gadget_cleanup(struct musb *);
+
+extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
+
+extern int musb_gadget_set_halt(struct usb_ep *ep, int value);
+
+#endif		/* __MUSB_GADGET_H */
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
new file mode 100644
index 00000000000..a57652fff39
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -0,0 +1,983 @@
+/*
+ * MUSB OTG peripheral driver ep0 handling
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include "musb_core.h"
+
+/* ep0 is always musb->endpoints[0].ep_in */
+#define	next_ep0_request(musb)	next_in_request(&(musb)->endpoints[0])
+
+/*
+ * locking note:  we use only the controller lock, for simpler correctness.
+ * It's always held with IRQs blocked.
+ *
+ * It protects the ep0 request queue as well as ep0_state, not just the
+ * controller and indexed registers.  And that lock stays held unless it
+ * needs to be dropped to allow reentering this driver ... like upcalls to
+ * the gadget driver, or adjusting endpoint halt status.
+ */
+
+static char *decode_ep0stage(u8 stage)
+{
+	switch (stage) {
+	case MUSB_EP0_STAGE_SETUP:	return "idle";
+	case MUSB_EP0_STAGE_TX:		return "in";
+	case MUSB_EP0_STAGE_RX:		return "out";
+	case MUSB_EP0_STAGE_ACKWAIT:	return "wait";
+	case MUSB_EP0_STAGE_STATUSIN:	return "in/status";
+	case MUSB_EP0_STAGE_STATUSOUT:	return "out/status";
+	default:			return "?";
+	}
+}
+
+/* handle a standard GET_STATUS request
+ * Context:  caller holds controller lock
+ */
+static int service_tx_status_request(
+	struct musb *musb,
+	const struct usb_ctrlrequest *ctrlrequest)
+{
+	void __iomem	*mbase = musb->mregs;
+	int handled = 1;
+	u8 result[2], epnum = 0;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	result[1] = 0;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
+		result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+#ifdef CONFIG_USB_MUSB_OTG
+		if (musb->g.is_otg) {
+			result[0] |= musb->g.b_hnp_enable
+				<< USB_DEVICE_B_HNP_ENABLE;
+			result[0] |= musb->g.a_alt_hnp_support
+				<< USB_DEVICE_A_ALT_HNP_SUPPORT;
+			result[0] |= musb->g.a_hnp_support
+				<< USB_DEVICE_A_HNP_SUPPORT;
+		}
+#endif
+		break;
+
+	case USB_RECIP_INTERFACE:
+		result[0] = 0;
+		break;
+
+	case USB_RECIP_ENDPOINT: {
+		int		is_in;
+		struct musb_ep	*ep;
+		u16		tmp;
+		void __iomem	*regs;
+
+		epnum = (u8) ctrlrequest->wIndex;
+		if (!epnum) {
+			result[0] = 0;
+			break;
+		}
+
+		is_in = epnum & USB_DIR_IN;
+		if (is_in) {
+			epnum &= 0x0f;
+			ep = &musb->endpoints[epnum].ep_in;
+		} else {
+			ep = &musb->endpoints[epnum].ep_out;
+		}
+		regs = musb->endpoints[epnum].regs;
+
+		if (epnum >= MUSB_C_NUM_EPS || !ep->desc) {
+			handled = -EINVAL;
+			break;
+		}
+
+		musb_ep_select(mbase, epnum);
+		if (is_in)
+			tmp = musb_readw(regs, MUSB_TXCSR)
+						& MUSB_TXCSR_P_SENDSTALL;
+		else
+			tmp = musb_readw(regs, MUSB_RXCSR)
+						& MUSB_RXCSR_P_SENDSTALL;
+		musb_ep_select(mbase, 0);
+
+		result[0] = tmp ? 1 : 0;
+		} break;
+
+	default:
+		/* class, vendor, etc ... delegate */
+		handled = 0;
+		break;
+	}
+
+	/* fill up the fifo; caller updates csr0 */
+	if (handled > 0) {
+		u16	len = le16_to_cpu(ctrlrequest->wLength);
+
+		if (len > 2)
+			len = 2;
+		musb_write_fifo(&musb->endpoints[0], len, result);
+	}
+
+	return handled;
+}
+
+/*
+ * handle a control-IN request, the end0 buffer contains the current request
+ * that is supposed to be a standard control request. Assumes the fifo to
+ * be at least 2 bytes long.
+ *
+ * @return 0 if the request was NOT HANDLED,
+ * < 0 when error
+ * > 0 when the request is processed
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+{
+	int handled = 0;	/* not handled */
+
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_GET_STATUS:
+			handled = service_tx_status_request(musb,
+					ctrlrequest);
+			break;
+
+		/* case USB_REQ_SYNC_FRAME: */
+
+		default:
+			break;
+		}
+	}
+	return handled;
+}
+
+/*
+ * Context:  caller holds controller lock
+ */
+static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req)
+{
+	musb_g_giveback(&musb->endpoints[0].ep_in, req, 0);
+	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+}
+
+/*
+ * Tries to start B-device HNP negotiation if enabled via sysfs
+ */
+static inline void musb_try_b_hnp_enable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl;
+
+	DBG(1, "HNP: Setting HR\n");
+	devctl = musb_readb(mbase, MUSB_DEVCTL);
+	musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
+}
+
+/*
+ * Handle all control requests with no DATA stage, including standard
+ * requests such as:
+ * USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized
+ *	always delegated to the gadget driver
+ * USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE
+ *	always handled here, except for class/vendor/... features
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_zero_data_request(struct musb *musb,
+		struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int handled = -EINVAL;
+	void __iomem *mbase = musb->mregs;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	/* the gadget driver handles everything except what we MUST handle */
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			/* change it after the status stage */
+			musb->set_address = true;
+			musb->address = (u8) (ctrlrequest->wValue & 0x7f);
+			handled = 1;
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				if (ctrlrequest->wValue
+						!= USB_DEVICE_REMOTE_WAKEUP)
+					break;
+				musb->may_wakeup = 0;
+				handled = 1;
+				break;
+			case USB_RECIP_INTERFACE:
+				break;
+			case USB_RECIP_ENDPOINT:{
+				const u8 num = ctrlrequest->wIndex & 0x0f;
+				struct musb_ep *musb_ep;
+
+				if (num == 0
+						|| num >= MUSB_C_NUM_EPS
+						|| ctrlrequest->wValue
+							!= USB_ENDPOINT_HALT)
+					break;
+
+				if (ctrlrequest->wIndex & USB_DIR_IN)
+					musb_ep = &musb->endpoints[num].ep_in;
+				else
+					musb_ep = &musb->endpoints[num].ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				/* REVISIT do it directly, no locking games */
+				spin_unlock(&musb->lock);
+				musb_gadget_set_halt(&musb_ep->end_point, 0);
+				spin_lock(&musb->lock);
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				handled = 1;
+				} break;
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				handled = 1;
+				switch (ctrlrequest->wValue) {
+				case USB_DEVICE_REMOTE_WAKEUP:
+					musb->may_wakeup = 1;
+					break;
+				case USB_DEVICE_TEST_MODE:
+					if (musb->g.speed != USB_SPEED_HIGH)
+						goto stall;
+					if (ctrlrequest->wIndex & 0xff)
+						goto stall;
+
+					switch (ctrlrequest->wIndex >> 8) {
+					case 1:
+						pr_debug("TEST_J\n");
+						/* TEST_J */
+						musb->test_mode_nr =
+							MUSB_TEST_J;
+						break;
+					case 2:
+						/* TEST_K */
+						pr_debug("TEST_K\n");
+						musb->test_mode_nr =
+							MUSB_TEST_K;
+						break;
+					case 3:
+						/* TEST_SE0_NAK */
+						pr_debug("TEST_SE0_NAK\n");
+						musb->test_mode_nr =
+							MUSB_TEST_SE0_NAK;
+						break;
+					case 4:
+						/* TEST_PACKET */
+						pr_debug("TEST_PACKET\n");
+						musb->test_mode_nr =
+							MUSB_TEST_PACKET;
+						break;
+					default:
+						goto stall;
+					}
+
+					/* enter test mode after irq */
+					if (handled > 0)
+						musb->test_mode = true;
+					break;
+#ifdef CONFIG_USB_MUSB_OTG
+				case USB_DEVICE_B_HNP_ENABLE:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.b_hnp_enable = 1;
+					musb_try_b_hnp_enable(musb);
+					break;
+				case USB_DEVICE_A_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_hnp_support = 1;
+					break;
+				case USB_DEVICE_A_ALT_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_alt_hnp_support = 1;
+					break;
+#endif
+stall:
+				default:
+					handled = -EINVAL;
+					break;
+				}
+				break;
+
+			case USB_RECIP_INTERFACE:
+				break;
+
+			case USB_RECIP_ENDPOINT:{
+				const u8		epnum =
+					ctrlrequest->wIndex & 0x0f;
+				struct musb_ep		*musb_ep;
+				struct musb_hw_ep	*ep;
+				void __iomem		*regs;
+				int			is_in;
+				u16			csr;
+
+				if (epnum == 0
+						|| epnum >= MUSB_C_NUM_EPS
+						|| ctrlrequest->wValue
+							!= USB_ENDPOINT_HALT)
+					break;
+
+				ep = musb->endpoints + epnum;
+				regs = ep->regs;
+				is_in = ctrlrequest->wIndex & USB_DIR_IN;
+				if (is_in)
+					musb_ep = &ep->ep_in;
+				else
+					musb_ep = &ep->ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				musb_ep_select(mbase, epnum);
+				if (is_in) {
+					csr = musb_readw(regs,
+							MUSB_TXCSR);
+					if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+						csr |= MUSB_TXCSR_FLUSHFIFO;
+					csr |= MUSB_TXCSR_P_SENDSTALL
+						| MUSB_TXCSR_CLRDATATOG
+						| MUSB_TXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_TXCSR,
+							csr);
+				} else {
+					csr = musb_readw(regs,
+							MUSB_RXCSR);
+					csr |= MUSB_RXCSR_P_SENDSTALL
+						| MUSB_RXCSR_FLUSHFIFO
+						| MUSB_RXCSR_CLRDATATOG
+						| MUSB_TXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_RXCSR,
+							csr);
+				}
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				handled = 1;
+				} break;
+
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+		default:
+			/* delegate SET_CONFIGURATION, etc */
+			handled = 0;
+		}
+	} else
+		handled = 0;
+	return handled;
+}
+
+/* we have an ep0out data packet
+ * Context:  caller holds controller lock
+ */
+static void ep0_rxstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct usb_request	*req;
+	u16			tmp;
+
+	req = next_ep0_request(musb);
+
+	/* read packet and ack; or stall because of gadget driver bug:
+	 * should have provided the rx buffer before setup() returned.
+	 */
+	if (req) {
+		void		*buf = req->buf + req->actual;
+		unsigned	len = req->length - req->actual;
+
+		/* read the buffer */
+		tmp = musb_readb(regs, MUSB_COUNT0);
+		if (tmp > len) {
+			req->status = -EOVERFLOW;
+			tmp = len;
+		}
+		musb_read_fifo(&musb->endpoints[0], tmp, buf);
+		req->actual += tmp;
+		tmp = MUSB_CSR0_P_SVDRXPKTRDY;
+		if (tmp < 64 || req->actual == req->length) {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			tmp |= MUSB_CSR0_P_DATAEND;
+		} else
+			req = NULL;
+	} else
+		tmp = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL;
+
+
+	/* Completion handler may choose to stall, e.g. because the
+	 * message just received holds invalid data.
+	 */
+	if (req) {
+		musb->ackpend = tmp;
+		musb_g_ep0_giveback(musb, req);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+	musb_ep_select(musb->mregs, 0);
+	musb_writew(regs, MUSB_CSR0, tmp);
+}
+
+/*
+ * transmitting to the host (IN), this code might be called from IRQ
+ * and from kernel thread.
+ *
+ * Context:  caller holds controller lock
+ */
+static void ep0_txstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct usb_request	*request = next_ep0_request(musb);
+	u16			csr = MUSB_CSR0_TXPKTRDY;
+	u8			*fifo_src;
+	u8			fifo_count;
+
+	if (!request) {
+		/* WARN_ON(1); */
+		DBG(2, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
+		return;
+	}
+
+	/* load the data */
+	fifo_src = (u8 *) request->buf + request->actual;
+	fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
+		request->length - request->actual);
+	musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
+	request->actual += fifo_count;
+
+	/* update the flags */
+	if (fifo_count < MUSB_MAX_END0_PACKET
+			|| request->actual == request->length) {
+		musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+		csr |= MUSB_CSR0_P_DATAEND;
+	} else
+		request = NULL;
+
+	/* report completions as soon as the fifo's loaded; there's no
+	 * win in waiting till this last packet gets acked.  (other than
+	 * very precise fault reporting, needed by USB TMC; possible with
+	 * this hardware, but not usable from portable gadget drivers.)
+	 */
+	if (request) {
+		musb->ackpend = csr;
+		musb_g_ep0_giveback(musb, request);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+
+	/* send it out, triggering a "txpktrdy cleared" irq */
+	musb_ep_select(musb->mregs, 0);
+	musb_writew(regs, MUSB_CSR0, csr);
+}
+
+/*
+ * Read a SETUP packet (struct usb_ctrlrequest) from the hardware.
+ * Fields are left in USB byte-order.
+ *
+ * Context:  caller holds controller lock.
+ */
+static void
+musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
+{
+	struct usb_request	*r;
+	void __iomem		*regs = musb->control_ep->regs;
+
+	musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
+
+	/* NOTE:  earlier 2.6 versions changed setup packets to host
+	 * order, but now USB packets always stay in USB byte order.
+	 */
+	DBG(3, "SETUP req%02x.%02x v%04x i%04x l%d\n",
+		req->bRequestType,
+		req->bRequest,
+		le16_to_cpu(req->wValue),
+		le16_to_cpu(req->wIndex),
+		le16_to_cpu(req->wLength));
+
+	/* clean up any leftover transfers */
+	r = next_ep0_request(musb);
+	if (r)
+		musb_g_ep0_giveback(musb, r);
+
+	/* For zero-data requests we want to delay the STATUS stage to
+	 * avoid SETUPEND errors.  If we read data (OUT), delay accepting
+	 * packets until there's a buffer to store them in.
+	 *
+	 * If we write data, the controller acts happier if we enable
+	 * the TX FIFO right away, and give the controller a moment
+	 * to switch modes...
+	 */
+	musb->set_address = false;
+	musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
+	if (req->wLength == 0) {
+		if (req->bRequestType & USB_DIR_IN)
+			musb->ackpend |= MUSB_CSR0_TXPKTRDY;
+		musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
+	} else if (req->bRequestType & USB_DIR_IN) {
+		musb->ep0_state = MUSB_EP0_STAGE_TX;
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY);
+		while ((musb_readw(regs, MUSB_CSR0)
+				& MUSB_CSR0_RXPKTRDY) != 0)
+			cpu_relax();
+		musb->ackpend = 0;
+	} else
+		musb->ep0_state = MUSB_EP0_STAGE_RX;
+}
+
+static int
+forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int retval;
+	if (!musb->gadget_driver)
+		return -EOPNOTSUPP;
+	spin_unlock(&musb->lock);
+	retval = musb->gadget_driver->setup(&musb->g, ctrlrequest);
+	spin_lock(&musb->lock);
+	return retval;
+}
+
+/*
+ * Handle peripheral ep0 interrupt
+ *
+ * Context: irq handler; we won't re-enter the driver that way.
+ */
+irqreturn_t musb_g_ep0_irq(struct musb *musb)
+{
+	u16		csr;
+	u16		len;
+	void __iomem	*mbase = musb->mregs;
+	void __iomem	*regs = musb->endpoints[0].regs;
+	irqreturn_t	retval = IRQ_NONE;
+
+	musb_ep_select(mbase, 0);	/* select ep0 */
+	csr = musb_readw(regs, MUSB_CSR0);
+	len = musb_readb(regs, MUSB_COUNT0);
+
+	DBG(4, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
+			csr, len,
+			musb_readb(mbase, MUSB_FADDR),
+			decode_ep0stage(musb->ep0_state));
+
+	/* I sent a stall.. need to acknowledge it now.. */
+	if (csr & MUSB_CSR0_P_SENTSTALL) {
+		musb_writew(regs, MUSB_CSR0,
+				csr & ~MUSB_CSR0_P_SENTSTALL);
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		csr = musb_readw(regs, MUSB_CSR0);
+	}
+
+	/* request ended "early" */
+	if (csr & MUSB_CSR0_P_SETUPEND) {
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* NOTE:  request may need completion */
+	}
+
+	/* docs from Mentor only describe tx, rx, and idle/setup states.
+	 * we need to handle nuances around status stages, and also the
+	 * case where status and setup stages come back-to-back ...
+	 */
+	switch (musb->ep0_state) {
+
+	case MUSB_EP0_STAGE_TX:
+		/* irq on clearing txpktrdy */
+		if ((csr & MUSB_CSR0_TXPKTRDY) == 0) {
+			ep0_txstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_RX:
+		/* irq on set rxpktrdy */
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			ep0_rxstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_STATUSIN:
+		/* end of sequence #2 (OUT/RX state) or #3 (no data) */
+
+		/* update address (if needed) only @ the end of the
+		 * status phase per usb spec, which also guarantees
+		 * we get 10 msec to receive this irq... until this
+		 * is done we won't see the next packet.
+		 */
+		if (musb->set_address) {
+			musb->set_address = false;
+			musb_writeb(mbase, MUSB_FADDR, musb->address);
+		}
+
+		/* enter test mode if needed (exit by reset) */
+		else if (musb->test_mode) {
+			DBG(1, "entering TESTMODE\n");
+
+			if (MUSB_TEST_PACKET == musb->test_mode_nr)
+				musb_load_testpacket(musb);
+
+			musb_writeb(mbase, MUSB_TESTMODE,
+					musb->test_mode_nr);
+		}
+		/* FALLTHROUGH */
+
+	case MUSB_EP0_STAGE_STATUSOUT:
+		/* end of sequence #1: write to host (TX state) */
+		{
+			struct usb_request	*req;
+
+			req = next_ep0_request(musb);
+			if (req)
+				musb_g_ep0_giveback(musb, req);
+		}
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		/* FALLTHROUGH */
+
+	case MUSB_EP0_STAGE_SETUP:
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			struct usb_ctrlrequest	setup;
+			int			handled = 0;
+
+			if (len != 8) {
+				ERR("SETUP packet len %d != 8 ?\n", len);
+				break;
+			}
+			musb_read_setup(musb, &setup);
+			retval = IRQ_HANDLED;
+
+			/* sometimes the RESET won't be reported */
+			if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) {
+				u8	power;
+
+				printk(KERN_NOTICE "%s: peripheral reset "
+						"irq lost!\n",
+						musb_driver_name);
+				power = musb_readb(mbase, MUSB_POWER);
+				musb->g.speed = (power & MUSB_POWER_HSMODE)
+					? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+			}
+
+			switch (musb->ep0_state) {
+
+			/* sequence #3 (no data stage), includes requests
+			 * we can't forward (notably SET_ADDRESS and the
+			 * device/endpoint feature set/clear operations)
+			 * plus SET_CONFIGURATION and others we must
+			 */
+			case MUSB_EP0_STAGE_ACKWAIT:
+				handled = service_zero_data_request(
+						musb, &setup);
+
+				/* status stage might be immediate */
+				if (handled > 0) {
+					musb->ackpend |= MUSB_CSR0_P_DATAEND;
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSIN;
+				}
+				break;
+
+			/* sequence #1 (IN to host), includes GET_STATUS
+			 * requests that we can't forward, GET_DESCRIPTOR
+			 * and others that we must
+			 */
+			case MUSB_EP0_STAGE_TX:
+				handled = service_in_request(musb, &setup);
+				if (handled > 0) {
+					musb->ackpend = MUSB_CSR0_TXPKTRDY
+						| MUSB_CSR0_P_DATAEND;
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSOUT;
+				}
+				break;
+
+			/* sequence #2 (OUT from host), always forward */
+			default:		/* MUSB_EP0_STAGE_RX */
+				break;
+			}
+
+			DBG(3, "handled %d, csr %04x, ep0stage %s\n",
+				handled, csr,
+				decode_ep0stage(musb->ep0_state));
+
+			/* unless we need to delegate this to the gadget
+			 * driver, we know how to wrap this up:  csr0 has
+			 * not yet been written.
+			 */
+			if (handled < 0)
+				goto stall;
+			else if (handled > 0)
+				goto finish;
+
+			handled = forward_to_driver(musb, &setup);
+			if (handled < 0) {
+				musb_ep_select(mbase, 0);
+stall:
+				DBG(3, "stall (%d)\n", handled);
+				musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
+				musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+finish:
+				musb_writew(regs, MUSB_CSR0,
+						musb->ackpend);
+				musb->ackpend = 0;
+			}
+		}
+		break;
+
+	case MUSB_EP0_STAGE_ACKWAIT:
+		/* This should not happen. But happens with tusb6010 with
+		 * g_file_storage and high speed. Do nothing.
+		 */
+		retval = IRQ_HANDLED;
+		break;
+
+	default:
+		/* "can't happen" */
+		WARN_ON(1);
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		break;
+	}
+
+	return retval;
+}
+
+
+static int
+musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_disable(struct usb_ep *e)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int
+musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
+{
+	struct musb_ep		*ep;
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			status;
+	unsigned long		lockflags;
+	void __iomem		*regs;
+
+	if (!e || !r)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	regs = musb->control_ep->regs;
+
+	req = to_musb_request(r);
+	req->musb = musb;
+	req->request.actual = 0;
+	req->request.status = -EINPROGRESS;
+	req->tx = ep->is_in;
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	switch (musb->ep0_state) {
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* zero-length data */
+		status = 0;
+		break;
+	default:
+		DBG(1, "ep0 request queued in state %d\n",
+				musb->ep0_state);
+		status = -EINVAL;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&(req->request.list), &(ep->req_list));
+
+	DBG(3, "queue to %s (%s), length=%d\n",
+			ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
+			req->request.length);
+
+	musb_ep_select(musb->mregs, 0);
+
+	/* sequence #1, IN ... start writing the data */
+	if (musb->ep0_state == MUSB_EP0_STAGE_TX)
+		ep0_txstate(musb);
+
+	/* sequence #3, no-data ... issue IN status */
+	else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) {
+		if (req->request.length)
+			status = -EINVAL;
+		else {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			musb_writew(regs, MUSB_CSR0,
+					musb->ackpend | MUSB_CSR0_P_DATAEND);
+			musb->ackpend = 0;
+			musb_g_ep0_giveback(ep->musb, r);
+		}
+
+	/* else for sequence #2 (OUT), caller provides a buffer
+	 * before the next packet arrives.  deferred responses
+	 * (after SETUP is acked) are racey.
+	 */
+	} else if (musb->ackpend) {
+		musb_writew(regs, MUSB_CSR0, musb->ackpend);
+		musb->ackpend = 0;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	/* we just won't support this */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_halt(struct usb_ep *e, int value)
+{
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	void __iomem		*base, *regs;
+	unsigned long		flags;
+	int			status;
+	u16			csr;
+
+	if (!e || !value)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	base = musb->mregs;
+	regs = musb->control_ep->regs;
+	status = 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	musb_ep_select(base, 0);
+	csr = musb->ackpend;
+
+	switch (musb->ep0_state) {
+
+	/* Stalls are usually issued after parsing SETUP packet, either
+	 * directly in irq context from setup() or else later.
+	 */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* STALL for zero-length data */
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* FALLTHROUGH */
+
+	/* It's also OK to issue stalls during callbacks when a non-empty
+	 * DATA stage buffer has been read (or even written).
+	 */
+	case MUSB_EP0_STAGE_STATUSIN:	/* control-OUT status */
+	case MUSB_EP0_STAGE_STATUSOUT:	/* control-IN status */
+
+		csr |= MUSB_CSR0_P_SENDSTALL;
+		musb_writew(regs, MUSB_CSR0, csr);
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		musb->ackpend = 0;
+		break;
+	default:
+		DBG(1, "ep0 can't halt in state %d\n", musb->ep0_state);
+		status = -EINVAL;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+const struct usb_ep_ops musb_g_ep0_ops = {
+	.enable		= musb_g_ep0_enable,
+	.disable	= musb_g_ep0_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_g_ep0_queue,
+	.dequeue	= musb_g_ep0_dequeue,
+	.set_halt	= musb_g_ep0_halt,
+};
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
new file mode 100644
index 00000000000..8b4be012669
--- /dev/null
+++ b/drivers/usb/musb/musb_host.c
@@ -0,0 +1,2170 @@
+/*
+ * MUSB OTG driver host support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include "musb_core.h"
+#include "musb_host.h"
+
+
+/* MUSB HOST status 22-mar-2006
+ *
+ * - There's still lots of partial code duplication for fault paths, so
+ *   they aren't handled as consistently as they need to be.
+ *
+ * - PIO mostly behaved when last tested.
+ *     + including ep0, with all usbtest cases 9, 10
+ *     + usbtest 14 (ep0out) doesn't seem to run at all
+ *     + double buffered OUT/TX endpoints saw stalls(!) with certain usbtest
+ *       configurations, but otherwise double buffering passes basic tests.
+ *     + for 2.6.N, for N > ~10, needs API changes for hcd framework.
+ *
+ * - DMA (CPPI) ... partially behaves, not currently recommended
+ *     + about 1/15 the speed of typical EHCI implementations (PCI)
+ *     + RX, all too often reqpkt seems to misbehave after tx
+ *     + TX, no known issues (other than evident silicon issue)
+ *
+ * - DMA (Mentor/OMAP) ...has at least toggle update problems
+ *
+ * - Still no traffic scheduling code to make NAKing for bulk or control
+ *   transfers unable to starve other requests; or to make efficient use
+ *   of hardware with periodic transfers.  (Note that network drivers
+ *   commonly post bulk reads that stay pending for a long time; these
+ *   would make very visible trouble.)
+ *
+ * - Not tested with HNP, but some SRP paths seem to behave.
+ *
+ * NOTE 24-August-2006:
+ *
+ * - Bulk traffic finally uses both sides of hardware ep1, freeing up an
+ *   extra endpoint for periodic use enabling hub + keybd + mouse.  That
+ *   mostly works, except that with "usbnet" it's easy to trigger cases
+ *   with "ping" where RX loses.  (a) ping to davinci, even "ping -f",
+ *   fine; but (b) ping _from_ davinci, even "ping -c 1", ICMP RX loses
+ *   although ARP RX wins.  (That test was done with a full speed link.)
+ */
+
+
+/*
+ * NOTE on endpoint usage:
+ *
+ * CONTROL transfers all go through ep0.  BULK ones go through dedicated IN
+ * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
+ *
+ * (Yes, bulk _could_ use more of the endpoints than that, and would even
+ * benefit from it ... one remote device may easily be NAKing while others
+ * need to perform transfers in that same direction.  The same thing could
+ * be done in software though, assuming dma cooperates.)
+ *
+ * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
+ * So far that scheduling is both dumb and optimistic:  the endpoint will be
+ * "claimed" until its software queue is no longer refilled.  No multiplexing
+ * of transfers between endpoints, or anything clever.
+ */
+
+
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, unsigned int nOut,
+			u8 *buf, u32 len);
+
+/*
+ * Clear TX fifo. Needed to avoid BABBLE errors.
+ */
+static inline void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
+{
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	int		retries = 1000;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+		DBG(5, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
+		csr |= MUSB_TXCSR_FLUSHFIFO;
+		musb_writew(epio, MUSB_TXCSR, csr);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (retries-- < 1) {
+			ERR("Could not flush host TX fifo: csr: %04x\n", csr);
+			return;
+		}
+		mdelay(1);
+	}
+}
+
+/*
+ * Start transmit. Caller is responsible for locking shared resources.
+ * musb must be locked.
+ */
+static inline void musb_h_tx_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	if (ep->epnum) {
+		txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+		txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
+		musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+	} else {
+		txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
+		musb_writew(ep->regs, MUSB_CSR0, txcsr);
+	}
+
+}
+
+static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+	txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+	musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+}
+
+/*
+ * Start the URB at the front of an endpoint's queue
+ * end must be claimed from the caller.
+ *
+ * Context: controller locked, irqs blocked
+ */
+static void
+musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
+{
+	u16			frame;
+	u32			len;
+	void			*buf;
+	void __iomem		*mbase =  musb->mregs;
+	struct urb		*urb = next_urb(qh);
+	struct musb_hw_ep	*hw_ep = qh->hw_ep;
+	unsigned		pipe = urb->pipe;
+	u8			address = usb_pipedevice(pipe);
+	int			epnum = hw_ep->epnum;
+
+	/* initialize software qh state */
+	qh->offset = 0;
+	qh->segsize = 0;
+
+	/* gather right source of data */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* control transfers always start with SETUP */
+		is_in = 0;
+		hw_ep->out_qh = qh;
+		musb->ep0_stage = MUSB_EP0_START;
+		buf = urb->setup_packet;
+		len = 8;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		qh->iso_idx = 0;
+		qh->frame = 0;
+		buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+		len = urb->iso_frame_desc[0].length;
+		break;
+	default:		/* bulk, interrupt */
+		buf = urb->transfer_buffer;
+		len = urb->transfer_buffer_length;
+	}
+
+	DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
+			qh, urb, address, qh->epnum,
+			is_in ? "in" : "out",
+			({char *s; switch (qh->type) {
+			case USB_ENDPOINT_XFER_CONTROL:	s = ""; break;
+			case USB_ENDPOINT_XFER_BULK:	s = "-bulk"; break;
+			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
+			default:			s = "-intr"; break;
+			}; s; }),
+			epnum, buf, len);
+
+	/* Configure endpoint */
+	if (is_in || hw_ep->is_shared_fifo)
+		hw_ep->in_qh = qh;
+	else
+		hw_ep->out_qh = qh;
+	musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+
+	/* transmit may have more work: start it when it is time */
+	if (is_in)
+		return;
+
+	/* determine if the time is right for a periodic transfer */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_ISOC:
+	case USB_ENDPOINT_XFER_INT:
+		DBG(3, "check whether there's still time for periodic Tx\n");
+		qh->iso_idx = 0;
+		frame = musb_readw(mbase, MUSB_FRAME);
+		/* FIXME this doesn't implement that scheduling policy ...
+		 * or handle framecounter wrapping
+		 */
+		if ((urb->transfer_flags & URB_ISO_ASAP)
+				|| (frame >= urb->start_frame)) {
+			/* REVISIT the SOF irq handler shouldn't duplicate
+			 * this code; and we don't init urb->start_frame...
+			 */
+			qh->frame = 0;
+			goto start;
+		} else {
+			qh->frame = urb->start_frame;
+			/* enable SOF interrupt so we can count down */
+			DBG(1, "SOF for %d\n", epnum);
+#if 1 /* ifndef	CONFIG_ARCH_DAVINCI */
+			musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
+#endif
+		}
+		break;
+	default:
+start:
+		DBG(4, "Start TX%d %s\n", epnum,
+			hw_ep->tx_channel ? "dma" : "pio");
+
+		if (!hw_ep->tx_channel)
+			musb_h_tx_start(hw_ep);
+		else if (is_cppi_enabled() || tusb_dma_omap())
+			cppi_host_txdma_start(hw_ep);
+	}
+}
+
+/* caller owns controller lock, irqs are blocked */
+static void
+__musb_giveback(struct musb *musb, struct urb *urb, int status)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	DBG(({ int level; switch (urb->status) {
+				case 0:
+					level = 4;
+					break;
+				/* common/boring faults */
+				case -EREMOTEIO:
+				case -ESHUTDOWN:
+				case -ECONNRESET:
+				case -EPIPE:
+					level = 3;
+					break;
+				default:
+					level = 2;
+					break;
+				}; level; }),
+			"complete %p (%d), dev%d ep%d%s, %d/%d\n",
+			urb, urb->status,
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out",
+			urb->actual_length, urb->transfer_buffer_length
+			);
+
+	spin_unlock(&musb->lock);
+	usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
+	spin_lock(&musb->lock);
+}
+
+/* for bulk/interrupt endpoints only */
+static inline void
+musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
+{
+	struct usb_device	*udev = urb->dev;
+	u16			csr;
+	void __iomem		*epio = ep->regs;
+	struct musb_qh		*qh;
+
+	/* FIXME:  the current Mentor DMA code seems to have
+	 * problems getting toggle correct.
+	 */
+
+	if (is_in || ep->is_shared_fifo)
+		qh = ep->in_qh;
+	else
+		qh = ep->out_qh;
+
+	if (!is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		usb_settoggle(udev, qh->epnum, 1,
+			(csr & MUSB_TXCSR_H_DATATOGGLE)
+				? 1 : 0);
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		usb_settoggle(udev, qh->epnum, 0,
+			(csr & MUSB_RXCSR_H_DATATOGGLE)
+				? 1 : 0);
+	}
+}
+
+/* caller owns controller lock, irqs are blocked */
+static struct musb_qh *
+musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+{
+	int			is_in;
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	struct musb		*musb = ep->musb;
+	int			ready = qh->is_ready;
+
+	if (ep->is_shared_fifo)
+		is_in = 1;
+	else
+		is_in = usb_pipein(urb->pipe);
+
+	/* save toggle eagerly, for paranoia */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		musb_save_toggle(ep, is_in, urb);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (status == 0 && urb->error_count)
+			status = -EXDEV;
+		break;
+	}
+
+	usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
+
+	qh->is_ready = 0;
+	__musb_giveback(musb, urb, status);
+	qh->is_ready = ready;
+
+	/* reclaim resources (and bandwidth) ASAP; deschedule it, and
+	 * invalidate qh as soon as list_empty(&hep->urb_list)
+	 */
+	if (list_empty(&qh->hep->urb_list)) {
+		struct list_head	*head;
+
+		if (is_in)
+			ep->rx_reinit = 1;
+		else
+			ep->tx_reinit = 1;
+
+		/* clobber old pointers to this qh */
+		if (is_in || ep->is_shared_fifo)
+			ep->in_qh = NULL;
+		else
+			ep->out_qh = NULL;
+		qh->hep->hcpriv = NULL;
+
+		switch (qh->type) {
+
+		case USB_ENDPOINT_XFER_ISOC:
+		case USB_ENDPOINT_XFER_INT:
+			/* this is where periodic bandwidth should be
+			 * de-allocated if it's tracked and allocated;
+			 * and where we'd update the schedule tree...
+			 */
+			musb->periodic[ep->epnum] = NULL;
+			kfree(qh);
+			qh = NULL;
+			break;
+
+		case USB_ENDPOINT_XFER_CONTROL:
+		case USB_ENDPOINT_XFER_BULK:
+			/* fifo policy for these lists, except that NAKing
+			 * should rotate a qh to the end (for fairness).
+			 */
+			head = qh->ring.prev;
+			list_del(&qh->ring);
+			kfree(qh);
+			qh = first_qh(head);
+			break;
+		}
+	}
+	return qh;
+}
+
+/*
+ * Advance this hardware endpoint's queue, completing the specified urb and
+ * advancing to either the next urb queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, irqs are blocked
+ */
+static void
+musb_advance_schedule(struct musb *musb, struct urb *urb,
+		struct musb_hw_ep *hw_ep, int is_in)
+{
+	struct musb_qh	*qh;
+
+	if (is_in || hw_ep->is_shared_fifo)
+		qh = hw_ep->in_qh;
+	else
+		qh = hw_ep->out_qh;
+
+	if (urb->status == -EINPROGRESS)
+		qh = musb_giveback(qh, urb, 0);
+	else
+		qh = musb_giveback(qh, urb, urb->status);
+
+	if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+		DBG(4, "... next ep%d %cX urb %p\n",
+				hw_ep->epnum, is_in ? 'R' : 'T',
+				next_urb(qh));
+		musb_start_urb(musb, is_in, qh);
+	}
+}
+
+static inline u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr)
+{
+	/* we don't want fifo to fill itself again;
+	 * ignore dma (various models),
+	 * leave toggle alone (may not have been saved yet)
+	 */
+	csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_RXPKTRDY;
+	csr &= ~(MUSB_RXCSR_H_REQPKT
+		| MUSB_RXCSR_H_AUTOREQ
+		| MUSB_RXCSR_AUTOCLEAR);
+
+	/* write 2x to allow double buffering */
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+
+	/* flush writebuffer */
+	return musb_readw(hw_ep->regs, MUSB_RXCSR);
+}
+
+/*
+ * PIO RX for a packet (or part of it).
+ */
+static bool
+musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
+{
+	u16			rx_count;
+	u8			*buf;
+	u16			csr;
+	bool			done = false;
+	u32			length;
+	int			do_flush = 0;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	int			pipe = urb->pipe;
+	void			*buffer = urb->transfer_buffer;
+
+	/* musb_ep_select(mbase, epnum); */
+	rx_count = musb_readw(epio, MUSB_RXCOUNT);
+	DBG(3, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
+			urb->transfer_buffer, qh->offset,
+			urb->transfer_buffer_length);
+
+	/* unload FIFO */
+	if (usb_pipeisoc(pipe)) {
+		int					status = 0;
+		struct usb_iso_packet_descriptor	*d;
+
+		if (iso_err) {
+			status = -EILSEQ;
+			urb->error_count++;
+		}
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		buf = buffer + d->offset;
+		length = d->length;
+		if (rx_count > length) {
+			if (status == 0) {
+				status = -EOVERFLOW;
+				urb->error_count++;
+			}
+			DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		d->actual_length = length;
+
+		d->status = status;
+
+		/* see if we are done */
+		done = (++qh->iso_idx >= urb->number_of_packets);
+	} else {
+		/* non-isoch */
+		buf = buffer + qh->offset;
+		length = urb->transfer_buffer_length - qh->offset;
+		if (rx_count > length) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = -EOVERFLOW;
+			DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		qh->offset += length;
+
+		/* see if we are done */
+		done = (urb->actual_length == urb->transfer_buffer_length)
+			|| (rx_count < qh->maxpacket)
+			|| (urb->status != -EINPROGRESS);
+		if (done
+				&& (urb->status == -EINPROGRESS)
+				&& (urb->transfer_flags & URB_SHORT_NOT_OK)
+				&& (urb->actual_length
+					< urb->transfer_buffer_length))
+			urb->status = -EREMOTEIO;
+	}
+
+	musb_read_fifo(hw_ep, length, buf);
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	csr |= MUSB_RXCSR_H_WZC_BITS;
+	if (unlikely(do_flush))
+		musb_h_flush_rxfifo(hw_ep, csr);
+	else {
+		/* REVISIT this assumes AUTOCLEAR is never set */
+		csr &= ~(MUSB_RXCSR_RXPKTRDY | MUSB_RXCSR_H_REQPKT);
+		if (!done)
+			csr |= MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	return done;
+}
+
+/* we don't always need to reinit a given side of an endpoint...
+ * when we do, use tx/rx reinit routine and then construct a new CSR
+ * to address data toggle, NYET, and DMA or PIO.
+ *
+ * it's possible that driver bugs (especially for DMA) or aborting a
+ * transfer might have left the endpoint busier than it should be.
+ * the busy/not-empty tests are basically paranoia.
+ */
+static void
+musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
+{
+	u16	csr;
+
+	/* NOTE:  we know the "rx" fifo reinit never triggers for ep0.
+	 * That always uses tx_reinit since ep0 repurposes TX register
+	 * offsets; the initial SETUP packet is also a kind of OUT.
+	 */
+
+	/* if programmed for Tx, put it in RX mode */
+	if (ep->is_shared_fifo) {
+		csr = musb_readw(ep->regs, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_MODE) {
+			musb_h_tx_flush_fifo(ep);
+			musb_writew(ep->regs, MUSB_TXCSR,
+					MUSB_TXCSR_FRCDATATOG);
+		}
+		/* clear mode (and everything else) to enable Rx */
+		musb_writew(ep->regs, MUSB_TXCSR, 0);
+
+	/* scrub all previous state, clearing toggle */
+	} else {
+		csr = musb_readw(ep->regs, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_RXPKTRDY)
+			WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+				musb_readw(ep->regs, MUSB_RXCOUNT));
+
+		musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
+	}
+
+	/* target addr and (for multipoint) hub addr/port */
+	if (musb->is_multipoint) {
+		musb_writeb(ep->target_regs, MUSB_RXFUNCADDR,
+			qh->addr_reg);
+		musb_writeb(ep->target_regs, MUSB_RXHUBADDR,
+			qh->h_addr_reg);
+		musb_writeb(ep->target_regs, MUSB_RXHUBPORT,
+			qh->h_port_reg);
+	} else
+		musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
+
+	/* protocol/endpoint, interval/NAKlimit, i/o size */
+	musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
+	musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
+	/* NOTE: bulk combining rewrites high bits of maxpacket */
+	musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
+
+	ep->rx_reinit = 0;
+}
+
+
+/*
+ * Program an HDRC endpoint as per the given URB
+ * Context: irqs blocked, controller lock held
+ */
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, unsigned int is_out,
+			u8 *buf, u32 len)
+{
+	struct dma_controller	*dma_controller;
+	struct dma_channel	*dma_channel;
+	u8			dma_ok;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh;
+	u16			packet_sz;
+
+	if (!is_out || hw_ep->is_shared_fifo)
+		qh = hw_ep->in_qh;
+	else
+		qh = hw_ep->out_qh;
+
+	packet_sz = qh->maxpacket;
+
+	DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
+				"h_addr%02x h_port%02x bytes %d\n",
+			is_out ? "-->" : "<--",
+			epnum, urb, urb->dev->speed,
+			qh->addr_reg, qh->epnum, is_out ? "out" : "in",
+			qh->h_addr_reg, qh->h_port_reg,
+			len);
+
+	musb_ep_select(mbase, epnum);
+
+	/* candidate for DMA? */
+	dma_controller = musb->dma_controller;
+	if (is_dma_capable() && epnum && dma_controller) {
+		dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel;
+		if (!dma_channel) {
+			dma_channel = dma_controller->channel_alloc(
+					dma_controller, hw_ep, is_out);
+			if (is_out)
+				hw_ep->tx_channel = dma_channel;
+			else
+				hw_ep->rx_channel = dma_channel;
+		}
+	} else
+		dma_channel = NULL;
+
+	/* make sure we clear DMAEnab, autoSet bits from previous run */
+
+	/* OUT/transmit/EP0 or IN/receive? */
+	if (is_out) {
+		u16	csr;
+		u16	int_txe;
+		u16	load_count;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* disable interrupt in case we flush */
+		int_txe = musb_readw(mbase, MUSB_INTRTXE);
+		musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+		/* general endpoint setup */
+		if (epnum) {
+			/* ASSERT:  TXCSR_DMAENAB was already cleared */
+
+			/* flush all old state, set default */
+			musb_h_tx_flush_fifo(hw_ep);
+			csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
+					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_FRCDATATOG
+					| MUSB_TXCSR_H_RXSTALL
+					| MUSB_TXCSR_H_ERROR
+					| MUSB_TXCSR_TXPKTRDY
+					);
+			csr |= MUSB_TXCSR_MODE;
+
+			if (usb_gettoggle(urb->dev,
+					qh->epnum, 1))
+				csr |= MUSB_TXCSR_H_WR_DATATOGGLE
+					| MUSB_TXCSR_H_DATATOGGLE;
+			else
+				csr |= MUSB_TXCSR_CLRDATATOG;
+
+			/* twice in case of double packet buffering */
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may need to clear FLUSHFIFO ... */
+			musb_writew(epio, MUSB_TXCSR, csr);
+			csr = musb_readw(epio, MUSB_TXCSR);
+		} else {
+			/* endpoint 0: just flush */
+			musb_writew(epio, MUSB_CSR0,
+				csr | MUSB_CSR0_FLUSHFIFO);
+			musb_writew(epio, MUSB_CSR0,
+				csr | MUSB_CSR0_FLUSHFIFO);
+		}
+
+		/* target addr and (for multipoint) hub addr/port */
+		if (musb->is_multipoint) {
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
+				qh->addr_reg);
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
+				qh->h_addr_reg);
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
+				qh->h_port_reg);
+/* FIXME if !epnum, do the same for RX ... */
+		} else
+			musb_writeb(mbase, MUSB_FADDR, qh->addr_reg);
+
+		/* protocol/endpoint/interval/NAKlimit */
+		if (epnum) {
+			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
+			if (can_bulk_split(musb, qh->type))
+				musb_writew(epio, MUSB_TXMAXP,
+					packet_sz
+					| ((hw_ep->max_packet_sz_tx /
+						packet_sz) - 1) << 11);
+			else
+				musb_writew(epio, MUSB_TXMAXP,
+					packet_sz);
+			musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
+		} else {
+			musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
+			if (musb->is_multipoint)
+				musb_writeb(epio, MUSB_TYPE0,
+						qh->type_reg);
+		}
+
+		if (can_bulk_split(musb, qh->type))
+			load_count = min((u32) hw_ep->max_packet_sz_tx,
+						len);
+		else
+			load_count = min((u32) packet_sz, len);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		if (dma_channel) {
+
+			/* clear previous state */
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_DMAENAB);
+			csr |= MUSB_TXCSR_MODE;
+			musb_writew(epio, MUSB_TXCSR,
+				csr | MUSB_TXCSR_MODE);
+
+			qh->segsize = min(len, dma_channel->max_len);
+
+			if (qh->segsize <= packet_sz)
+				dma_channel->desired_mode = 0;
+			else
+				dma_channel->desired_mode = 1;
+
+
+			if (dma_channel->desired_mode == 0) {
+				csr &= ~(MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAMODE);
+				csr |= (MUSB_TXCSR_DMAENAB);
+					/* against programming guide */
+			} else
+				csr |= (MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAENAB
+					| MUSB_TXCSR_DMAMODE);
+
+			musb_writew(epio, MUSB_TXCSR, csr);
+
+			dma_ok = dma_controller->channel_program(
+					dma_channel, packet_sz,
+					dma_channel->desired_mode,
+					urb->transfer_dma,
+					qh->segsize);
+			if (dma_ok) {
+				load_count = 0;
+			} else {
+				dma_controller->channel_release(dma_channel);
+				if (is_out)
+					hw_ep->tx_channel = NULL;
+				else
+					hw_ep->rx_channel = NULL;
+				dma_channel = NULL;
+			}
+		}
+#endif
+
+		/* candidate for DMA */
+		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+
+			/* program endpoint CSRs first, then setup DMA.
+			 * assume CPPI setup succeeds.
+			 * defer enabling dma.
+			 */
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_DMAENAB);
+			csr |= MUSB_TXCSR_MODE;
+			musb_writew(epio, MUSB_TXCSR,
+				csr | MUSB_TXCSR_MODE);
+
+			dma_channel->actual_len = 0L;
+			qh->segsize = len;
+
+			/* TX uses "rndis" mode automatically, but needs help
+			 * to identify the zero-length-final-packet case.
+			 */
+			dma_ok = dma_controller->channel_program(
+					dma_channel, packet_sz,
+					(urb->transfer_flags
+							& URB_ZERO_PACKET)
+						== URB_ZERO_PACKET,
+					urb->transfer_dma,
+					qh->segsize);
+			if (dma_ok) {
+				load_count = 0;
+			} else {
+				dma_controller->channel_release(dma_channel);
+				hw_ep->tx_channel = NULL;
+				dma_channel = NULL;
+
+				/* REVISIT there's an error path here that
+				 * needs handling:  can't do dma, but
+				 * there's no pio buffer address...
+				 */
+			}
+		}
+
+		if (load_count) {
+			/* ASSERT:  TXCSR_DMAENAB was already cleared */
+
+			/* PIO to load FIFO */
+			qh->segsize = load_count;
+			musb_write_fifo(hw_ep, load_count, buf);
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_DMAENAB
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_AUTOSET);
+			/* write CSR */
+			csr |= MUSB_TXCSR_MODE;
+
+			if (epnum)
+				musb_writew(epio, MUSB_TXCSR, csr);
+		}
+
+		/* re-enable interrupt */
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+	/* IN/receive */
+	} else {
+		u16	csr;
+
+		if (hw_ep->rx_reinit) {
+			musb_rx_reinit(musb, qh, hw_ep);
+
+			/* init new state: toggle and NYET, maybe DMA later */
+			if (usb_gettoggle(urb->dev, qh->epnum, 0))
+				csr = MUSB_RXCSR_H_WR_DATATOGGLE
+					| MUSB_RXCSR_H_DATATOGGLE;
+			else
+				csr = 0;
+			if (qh->type == USB_ENDPOINT_XFER_INT)
+				csr |= MUSB_RXCSR_DISNYET;
+
+		} else {
+			csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+
+			if (csr & (MUSB_RXCSR_RXPKTRDY
+					| MUSB_RXCSR_DMAENAB
+					| MUSB_RXCSR_H_REQPKT))
+				ERR("broken !rx_reinit, ep%d csr %04x\n",
+						hw_ep->epnum, csr);
+
+			/* scrub any stale state, leaving toggle alone */
+			csr &= MUSB_RXCSR_DISNYET;
+		}
+
+		/* kick things off */
+
+		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+			/* candidate for DMA */
+			if (dma_channel) {
+				dma_channel->actual_len = 0L;
+				qh->segsize = len;
+
+				/* AUTOREQ is in a DMA register */
+				musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+				csr = musb_readw(hw_ep->regs,
+						MUSB_RXCSR);
+
+				/* unless caller treats short rx transfers as
+				 * errors, we dare not queue multiple transfers.
+				 */
+				dma_ok = dma_controller->channel_program(
+						dma_channel, packet_sz,
+						!(urb->transfer_flags
+							& URB_SHORT_NOT_OK),
+						urb->transfer_dma,
+						qh->segsize);
+				if (!dma_ok) {
+					dma_controller->channel_release(
+							dma_channel);
+					hw_ep->rx_channel = NULL;
+					dma_channel = NULL;
+				} else
+					csr |= MUSB_RXCSR_DMAENAB;
+			}
+		}
+
+		csr |= MUSB_RXCSR_H_REQPKT;
+		DBG(7, "RXCSR%d := %04x\n", epnum, csr);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+	}
+}
+
+
+/*
+ * Service the default endpoint (ep0) as host.
+ * Return true until it's time to start the status stage.
+ */
+static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
+{
+	bool			 more = false;
+	u8			*fifo_dest = NULL;
+	u16			fifo_count = 0;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	struct usb_ctrlrequest	*request;
+
+	switch (musb->ep0_stage) {
+	case MUSB_EP0_IN:
+		fifo_dest = urb->transfer_buffer + urb->actual_length;
+		fifo_count = min(len, ((u16) (urb->transfer_buffer_length
+					- urb->actual_length)));
+		if (fifo_count < len)
+			urb->status = -EOVERFLOW;
+
+		musb_read_fifo(hw_ep, fifo_count, fifo_dest);
+
+		urb->actual_length += fifo_count;
+		if (len < qh->maxpacket) {
+			/* always terminate on short read; it's
+			 * rarely reported as an error.
+			 */
+		} else if (urb->actual_length <
+				urb->transfer_buffer_length)
+			more = true;
+		break;
+	case MUSB_EP0_START:
+		request = (struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (!request->wLength) {
+			DBG(4, "start no-DATA\n");
+			break;
+		} else if (request->bRequestType & USB_DIR_IN) {
+			DBG(4, "start IN-DATA\n");
+			musb->ep0_stage = MUSB_EP0_IN;
+			more = true;
+			break;
+		} else {
+			DBG(4, "start OUT-DATA\n");
+			musb->ep0_stage = MUSB_EP0_OUT;
+			more = true;
+		}
+		/* FALLTHROUGH */
+	case MUSB_EP0_OUT:
+		fifo_count = min(qh->maxpacket, ((u16)
+				(urb->transfer_buffer_length
+				- urb->actual_length)));
+
+		if (fifo_count) {
+			fifo_dest = (u8 *) (urb->transfer_buffer
+					+ urb->actual_length);
+			DBG(3, "Sending %d bytes to %p\n",
+					fifo_count, fifo_dest);
+			musb_write_fifo(hw_ep, fifo_count, fifo_dest);
+
+			urb->actual_length += fifo_count;
+			more = true;
+		}
+		break;
+	default:
+		ERR("bogus ep0 stage %d\n", musb->ep0_stage);
+		break;
+	}
+
+	return more;
+}
+
+/*
+ * Handle default endpoint interrupt as host. Only called in IRQ time
+ * from the LinuxIsr() interrupt service routine.
+ *
+ * called with controller irqlocked
+ */
+irqreturn_t musb_h_ep0_irq(struct musb *musb)
+{
+	struct urb		*urb;
+	u16			csr, len;
+	int			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	bool			complete = false;
+	irqreturn_t		retval = IRQ_NONE;
+
+	/* ep0 only has one queue, "in" */
+	urb = next_urb(qh);
+
+	musb_ep_select(mbase, 0);
+	csr = musb_readw(epio, MUSB_CSR0);
+	len = (csr & MUSB_CSR0_RXPKTRDY)
+			? musb_readb(epio, MUSB_COUNT0)
+			: 0;
+
+	DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
+		csr, qh, len, urb, musb->ep0_stage);
+
+	/* if we just did status stage, we are done */
+	if (MUSB_EP0_STATUS == musb->ep0_stage) {
+		retval = IRQ_HANDLED;
+		complete = true;
+	}
+
+	/* prepare status */
+	if (csr & MUSB_CSR0_H_RXSTALL) {
+		DBG(6, "STALLING ENDPOINT\n");
+		status = -EPIPE;
+
+	} else if (csr & MUSB_CSR0_H_ERROR) {
+		DBG(2, "no response, csr0 %04x\n", csr);
+		status = -EPROTO;
+
+	} else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
+		DBG(2, "control NAK timeout\n");
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * control transfer, if another one is queued, so that
+		 * ep0 is more likely to stay busy.
+		 *
+		 * if (qh->ring.next != &musb->control), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_writew(epio, MUSB_CSR0, 0);
+		retval = IRQ_HANDLED;
+	}
+
+	if (status) {
+		DBG(6, "aborting\n");
+		retval = IRQ_HANDLED;
+		if (urb)
+			urb->status = status;
+		complete = true;
+
+		/* use the proper sequence to abort the transfer */
+		if (csr & MUSB_CSR0_H_REQPKT) {
+			csr &= ~MUSB_CSR0_H_REQPKT;
+			musb_writew(epio, MUSB_CSR0, csr);
+			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+			musb_writew(epio, MUSB_CSR0, csr);
+		} else {
+			csr |= MUSB_CSR0_FLUSHFIFO;
+			musb_writew(epio, MUSB_CSR0, csr);
+			musb_writew(epio, MUSB_CSR0, csr);
+			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+			musb_writew(epio, MUSB_CSR0, csr);
+		}
+
+		musb_writeb(epio, MUSB_NAKLIMIT0, 0);
+
+		/* clear it */
+		musb_writew(epio, MUSB_CSR0, 0);
+	}
+
+	if (unlikely(!urb)) {
+		/* stop endpoint since we have no place for its data, this
+		 * SHOULD NEVER HAPPEN! */
+		ERR("no URB for end 0\n");
+
+		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+		musb_writew(epio, MUSB_CSR0, 0);
+
+		goto done;
+	}
+
+	if (!complete) {
+		/* call common logic and prepare response */
+		if (musb_h_ep0_continue(musb, len, urb)) {
+			/* more packets required */
+			csr = (MUSB_EP0_IN == musb->ep0_stage)
+				?  MUSB_CSR0_H_REQPKT : MUSB_CSR0_TXPKTRDY;
+		} else {
+			/* data transfer complete; perform status phase */
+			if (usb_pipeout(urb->pipe)
+					|| !urb->transfer_buffer_length)
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_H_REQPKT;
+			else
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_TXPKTRDY;
+
+			/* flag status stage */
+			musb->ep0_stage = MUSB_EP0_STATUS;
+
+			DBG(5, "ep0 STATUS, csr %04x\n", csr);
+
+		}
+		musb_writew(epio, MUSB_CSR0, csr);
+		retval = IRQ_HANDLED;
+	} else
+		musb->ep0_stage = MUSB_EP0_IDLE;
+
+	/* call completion handler if done */
+	if (complete)
+		musb_advance_schedule(musb, urb, hw_ep, 1);
+done:
+	return retval;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side TX (OUT) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, Program Endpoint
+		- ... which starts DMA to fifo in mode 1 or 0
+
+	DMA Isr (transfer complete) -> TxAvail()
+		- Stop DMA (~DmaEnab)	(<--- Alert ... currently happens
+					only in musb_cleanup_urb)
+		- TxPktRdy has to be set in mode 0 or for
+			short packets in mode 1.
+*/
+
+#endif
+
+/* Service a Tx-Available or dma completion irq for the endpoint */
+void musb_host_tx(struct musb *musb, u8 epnum)
+{
+	int			pipe;
+	bool			done = false;
+	u16			tx_csr;
+	size_t			wLength = 0;
+	u8			*buf = NULL;
+	struct urb		*urb;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->out_qh;
+	u32			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct dma_channel	*dma;
+
+	urb = next_urb(qh);
+
+	musb_ep_select(mbase, epnum);
+	tx_csr = musb_readw(epio, MUSB_TXCSR);
+
+	/* with CPPI, DMA sometimes triggers "extra" irqs */
+	if (!urb) {
+		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		goto finish;
+	}
+
+	pipe = urb->pipe;
+	dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
+	DBG(4, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
+			dma ? ", dma" : "");
+
+	/* check for errors */
+	if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
+		/* dma was disabled, fifo flushed */
+		DBG(3, "TX end %d stall\n", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (tx_csr & MUSB_TXCSR_H_ERROR) {
+		/* (NON-ISO) dma was disabled, fifo flushed */
+		DBG(3, "TX 3strikes on ep=%d\n", epnum);
+
+		status = -ETIMEDOUT;
+
+	} else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
+		DBG(6, "TX end=%d device not responding\n", epnum);
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * transfer, if there's some other (nonperiodic) tx urb
+		 * that could use this fifo.  (dma complicates it...)
+		 *
+		 * if (bulk && qh->ring.next != &musb->out_bulk), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR,
+				MUSB_TXCSR_H_WZC_BITS
+				| MUSB_TXCSR_TXPKTRDY);
+		goto finish;
+	}
+
+	if (status) {
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+		}
+
+		/* do the proper sequence to abort the transfer in the
+		 * usb core; the dma engine should already be stopped.
+		 */
+		musb_h_tx_flush_fifo(hw_ep);
+		tx_csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAENAB
+				| MUSB_TXCSR_H_ERROR
+				| MUSB_TXCSR_H_RXSTALL
+				| MUSB_TXCSR_H_NAKTIMEOUT
+				);
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		musb_writeb(epio, MUSB_TXINTERVAL, 0);
+
+		done = true;
+	}
+
+	/* second cppi case */
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		goto finish;
+
+	}
+
+	/* REVISIT this looks wrong... */
+	if (!status || dma || usb_pipeisoc(pipe)) {
+		if (dma)
+			wLength = dma->actual_len;
+		else
+			wLength = qh->segsize;
+		qh->offset += wLength;
+
+		if (usb_pipeisoc(pipe)) {
+			struct usb_iso_packet_descriptor	*d;
+
+			d = urb->iso_frame_desc + qh->iso_idx;
+			d->actual_length = qh->segsize;
+			if (++qh->iso_idx >= urb->number_of_packets) {
+				done = true;
+			} else {
+				d++;
+				buf = urb->transfer_buffer + d->offset;
+				wLength = d->length;
+			}
+		} else if (dma) {
+			done = true;
+		} else {
+			/* see if we need to send more data, or ZLP */
+			if (qh->segsize < qh->maxpacket)
+				done = true;
+			else if (qh->offset == urb->transfer_buffer_length
+					&& !(urb->transfer_flags
+						& URB_ZERO_PACKET))
+				done = true;
+			if (!done) {
+				buf = urb->transfer_buffer
+						+ qh->offset;
+				wLength = urb->transfer_buffer_length
+						- qh->offset;
+			}
+		}
+	}
+
+	/* urb->status != -EINPROGRESS means request has been faulted,
+	 * so we must abort this transfer after cleanup
+	 */
+	if (urb->status != -EINPROGRESS) {
+		done = true;
+		if (status == 0)
+			status = urb->status;
+	}
+
+	if (done) {
+		/* set status */
+		urb->status = status;
+		urb->actual_length = qh->offset;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+
+	} else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
+		/* WARN_ON(!buf); */
+
+		/* REVISIT:  some docs say that when hw_ep->tx_double_buffered,
+		 * (and presumably, fifo is not half-full) we should write TWO
+		 * packets before updating TXCSR ... other docs disagree ...
+		 */
+		/* PIO:  start next packet in this URB */
+		wLength = min(qh->maxpacket, (u16) wLength);
+		musb_write_fifo(hw_ep, wLength, buf);
+		qh->segsize = wLength;
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR,
+				MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
+	} else
+		DBG(1, "not complete, but dma enabled?\n");
+
+finish:
+	return;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side RX (IN) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, ProgramEndpoint
+		- first IN token is sent out (by setting ReqPkt)
+	LinuxIsr -> RxReady()
+	/\	=> first packet is received
+	|	- Set in mode 0 (DmaEnab, ~ReqPkt)
+	|		-> DMA Isr (transfer complete) -> RxReady()
+	|		    - Ack receive (~RxPktRdy), turn off DMA (~DmaEnab)
+	|		    - if urb not complete, send next IN token (ReqPkt)
+	|			   |		else complete urb.
+	|			   |
+	---------------------------
+ *
+ * Nuances of mode 1:
+ *	For short packets, no ack (+RxPktRdy) is sent automatically
+ *	(even if AutoClear is ON)
+ *	For full packets, ack (~RxPktRdy) and next IN token (+ReqPkt) is sent
+ *	automatically => major problem, as collecting the next packet becomes
+ *	difficult. Hence mode 1 is not used.
+ *
+ * REVISIT
+ *	All we care about at this driver level is that
+ *       (a) all URBs terminate with REQPKT cleared and fifo(s) empty;
+ *       (b) termination conditions are: short RX, or buffer full;
+ *       (c) fault modes include
+ *           - iff URB_SHORT_NOT_OK, short RX status is -EREMOTEIO.
+ *             (and that endpoint's dma queue stops immediately)
+ *           - overflow (full, PLUS more bytes in the terminal packet)
+ *
+ *	So for example, usb-storage sets URB_SHORT_NOT_OK, and would
+ *	thus be a great candidate for using mode 1 ... for all but the
+ *	last packet of one URB's transfer.
+ */
+
+#endif
+
+/*
+ * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
+ * and high-bandwidth IN transfer cases.
+ */
+void musb_host_rx(struct musb *musb, u8 epnum)
+{
+	struct urb		*urb;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	size_t			xfer_len;
+	void __iomem		*mbase = musb->mregs;
+	int			pipe;
+	u16			rx_csr, val;
+	bool			iso_err = false;
+	bool			done = false;
+	u32			status;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+
+	urb = next_urb(qh);
+	dma = is_dma_capable() ? hw_ep->rx_channel : NULL;
+	status = 0;
+	xfer_len = 0;
+
+	rx_csr = musb_readw(epio, MUSB_RXCSR);
+	val = rx_csr;
+
+	if (unlikely(!urb)) {
+		/* REVISIT -- THIS SHOULD NEVER HAPPEN ... but, at least
+		 * usbtest #11 (unlinks) triggers it regularly, sometimes
+		 * with fifo full.  (Only with DMA??)
+		 */
+		DBG(3, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
+			musb_readw(epio, MUSB_RXCOUNT));
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		return;
+	}
+
+	pipe = urb->pipe;
+
+	DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
+		epnum, rx_csr, urb->actual_length,
+		dma ? dma->actual_len : 0);
+
+	/* check for errors, concurrent stall & unlink is not really
+	 * handled yet! */
+	if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
+		DBG(3, "RX end %d STALL\n", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (rx_csr & MUSB_RXCSR_H_ERROR) {
+		DBG(3, "end %d RX proto error\n", epnum);
+
+		status = -EPROTO;
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+
+	} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
+
+		if (USB_ENDPOINT_XFER_ISOC != qh->type) {
+			/* NOTE this code path would be a good place to PAUSE a
+			 * transfer, if there's some other (nonperiodic) rx urb
+			 * that could use this fifo.  (dma complicates it...)
+			 *
+			 * if (bulk && qh->ring.next != &musb->in_bulk), then
+			 * we have a candidate... NAKing is *NOT* an error
+			 */
+			DBG(6, "RX end %d NAK timeout\n", epnum);
+			musb_ep_select(mbase, epnum);
+			musb_writew(epio, MUSB_RXCSR,
+					MUSB_RXCSR_H_WZC_BITS
+					| MUSB_RXCSR_H_REQPKT);
+
+			goto finish;
+		} else {
+			DBG(4, "RX end %d ISO data error\n", epnum);
+			/* packet error reported later */
+			iso_err = true;
+		}
+	}
+
+	/* faults abort the transfer */
+	if (status) {
+		/* clean up dma and collect transfer count */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+		}
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+		done = true;
+		goto finish;
+	}
+
+	if (unlikely(dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY)) {
+		/* SHOULD NEVER HAPPEN ... but at least DaVinci has done it */
+		ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
+		goto finish;
+	}
+
+	/* thorough shutdown for now ... given more precise fault handling
+	 * and better queueing support, we might keep a DMA pipeline going
+	 * while processing this irq for earlier completions.
+	 */
+
+	/* FIXME this is _way_ too much in-line logic for Mentor DMA */
+
+#ifndef CONFIG_USB_INVENTRA_DMA
+	if (rx_csr & MUSB_RXCSR_H_REQPKT)  {
+		/* REVISIT this happened for a while on some short reads...
+		 * the cleanup still needs investigation... looks bad...
+		 * and also duplicates dma cleanup code above ... plus,
+		 * shouldn't this be the "half full" double buffer case?
+		 */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+			done = true;
+		}
+
+		DBG(2, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
+				xfer_len, dma ? ", dma" : "");
+		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | rx_csr);
+	}
+#endif
+	if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
+		xfer_len = dma->actual_len;
+
+		val &= ~(MUSB_RXCSR_DMAENAB
+			| MUSB_RXCSR_H_AUTOREQ
+			| MUSB_RXCSR_AUTOCLEAR
+			| MUSB_RXCSR_RXPKTRDY);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		/* done if urb buffer is full or short packet is recd */
+		done = (urb->actual_length + xfer_len >=
+				urb->transfer_buffer_length
+			|| dma->actual_len < qh->maxpacket);
+
+		/* send IN token for next packet, without AUTOREQ */
+		if (!done) {
+			val |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | val);
+		}
+
+		DBG(4, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
+			done ? "off" : "reset",
+			musb_readw(epio, MUSB_RXCSR),
+			musb_readw(epio, MUSB_RXCOUNT));
+#else
+		done = true;
+#endif
+	} else if (urb->status == -EINPROGRESS) {
+		/* if no errors, be sure a packet is ready for unloading */
+		if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) {
+			status = -EPROTO;
+			ERR("Rx interrupt with no errors or packet!\n");
+
+			/* FIXME this is another "SHOULD NEVER HAPPEN" */
+
+/* SCRUB (RX) */
+			/* do the proper sequence to abort the transfer */
+			musb_ep_select(mbase, epnum);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR, val);
+			goto finish;
+		}
+
+		/* we are expecting IN packets */
+#ifdef CONFIG_USB_INVENTRA_DMA
+		if (dma) {
+			struct dma_controller	*c;
+			u16			rx_count;
+			int			ret;
+
+			rx_count = musb_readw(epio, MUSB_RXCOUNT);
+
+			DBG(2, "RX%d count %d, buffer 0x%x len %d/%d\n",
+					epnum, rx_count,
+					urb->transfer_dma
+						+ urb->actual_length,
+					qh->offset,
+					urb->transfer_buffer_length);
+
+			c = musb->dma_controller;
+
+			dma->desired_mode = 0;
+#ifdef USE_MODE1
+			/* because of the issue below, mode 1 will
+			 * only rarely behave with correct semantics.
+			 */
+			if ((urb->transfer_flags &
+						URB_SHORT_NOT_OK)
+				&& (urb->transfer_buffer_length -
+						urb->actual_length)
+					> qh->maxpacket)
+				dma->desired_mode = 1;
+#endif
+
+/* Disadvantage of using mode 1:
+ *	It's basically usable only for mass storage class; essentially all
+ *	other protocols also terminate transfers on short packets.
+ *
+ * Details:
+ *	An extra IN token is sent at the end of the transfer (due to AUTOREQ)
+ *	If you try to use mode 1 for (transfer_buffer_length - 512), and try
+ *	to use the extra IN token to grab the last packet using mode 0, then
+ *	the problem is that you cannot be sure when the device will send the
+ *	last packet and RxPktRdy set. Sometimes the packet is recd too soon
+ *	such that it gets lost when RxCSR is re-set at the end of the mode 1
+ *	transfer, while sometimes it is recd just a little late so that if you
+ *	try to configure for mode 0 soon after the mode 1 transfer is
+ *	completed, you will find rxcount 0. Okay, so you might think why not
+ *	wait for an interrupt when the pkt is recd. Well, you won't get any!
+ */
+
+			val = musb_readw(epio, MUSB_RXCSR);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+
+			if (dma->desired_mode == 0)
+				val &= ~MUSB_RXCSR_H_AUTOREQ;
+			else
+				val |= MUSB_RXCSR_H_AUTOREQ;
+			val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
+
+			musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | val);
+
+			/* REVISIT if when actual_length != 0,
+			 * transfer_buffer_length needs to be
+			 * adjusted first...
+			 */
+			ret = c->channel_program(
+				dma, qh->maxpacket,
+				dma->desired_mode,
+				urb->transfer_dma
+					+ urb->actual_length,
+				(dma->desired_mode == 0)
+					? rx_count
+					: urb->transfer_buffer_length);
+
+			if (!ret) {
+				c->channel_release(dma);
+				hw_ep->rx_channel = NULL;
+				dma = NULL;
+				/* REVISIT reset CSR */
+			}
+		}
+#endif	/* Mentor DMA */
+
+		if (!dma) {
+			done = musb_host_packet_rx(musb, urb,
+					epnum, iso_err);
+			DBG(6, "read %spacket\n", done ? "last " : "");
+		}
+	}
+
+	if (dma && usb_pipeisoc(pipe)) {
+		struct usb_iso_packet_descriptor	*d;
+		int					iso_stat = status;
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		d->actual_length += xfer_len;
+		if (iso_err) {
+			iso_stat = -EILSEQ;
+			urb->error_count++;
+		}
+		d->status = iso_stat;
+	}
+
+finish:
+	urb->actual_length += xfer_len;
+	qh->offset += xfer_len;
+	if (done) {
+		if (urb->status == -EINPROGRESS)
+			urb->status = status;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
+	}
+}
+
+/* schedule nodes correspond to peripheral endpoints, like an OHCI QH.
+ * the software schedule associates multiple such nodes with a given
+ * host side hardware endpoint + direction; scheduling may activate
+ * that hardware endpoint.
+ */
+static int musb_schedule(
+	struct musb		*musb,
+	struct musb_qh		*qh,
+	int			is_in)
+{
+	int			idle;
+	int			best_diff;
+	int			best_end, epnum;
+	struct musb_hw_ep	*hw_ep = NULL;
+	struct list_head	*head = NULL;
+
+	/* use fixed hardware for control and bulk */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		head = &musb->control;
+		hw_ep = musb->control_ep;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		hw_ep = musb->bulk_ep;
+		if (is_in)
+			head = &musb->in_bulk;
+		else
+			head = &musb->out_bulk;
+		break;
+	}
+	if (head) {
+		idle = list_empty(head);
+		list_add_tail(&qh->ring, head);
+		goto success;
+	}
+
+	/* else, periodic transfers get muxed to other endpoints */
+
+	/* FIXME this doesn't consider direction, so it can only
+	 * work for one half of the endpoint hardware, and assumes
+	 * the previous cases handled all non-shared endpoints...
+	 */
+
+	/* we know this qh hasn't been scheduled, so all we need to do
+	 * is choose which hardware endpoint to put it on ...
+	 *
+	 * REVISIT what we really want here is a regular schedule tree
+	 * like e.g. OHCI uses, but for now musb->periodic is just an
+	 * array of the _single_ logical endpoint associated with a
+	 * given physical one (identity mapping logical->physical).
+	 *
+	 * that simplistic approach makes TT scheduling a lot simpler;
+	 * there is none, and thus none of its complexity...
+	 */
+	best_diff = 4096;
+	best_end = -1;
+
+	for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
+		int	diff;
+
+		if (musb->periodic[epnum])
+			continue;
+		hw_ep = &musb->endpoints[epnum];
+		if (hw_ep == musb->bulk_ep)
+			continue;
+
+		if (is_in)
+			diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
+		else
+			diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
+
+		if (diff > 0 && best_diff > diff) {
+			best_diff = diff;
+			best_end = epnum;
+		}
+	}
+	if (best_end < 0)
+		return -ENOSPC;
+
+	idle = 1;
+	hw_ep = musb->endpoints + best_end;
+	musb->periodic[best_end] = qh;
+	DBG(4, "qh %p periodic slot %d\n", qh, best_end);
+success:
+	qh->hw_ep = hw_ep;
+	qh->hep->hcpriv = qh;
+	if (idle)
+		musb_start_urb(musb, is_in, qh);
+	return 0;
+}
+
+static int musb_urb_enqueue(
+	struct usb_hcd			*hcd,
+	struct urb			*urb,
+	gfp_t				mem_flags)
+{
+	unsigned long			flags;
+	struct musb			*musb = hcd_to_musb(hcd);
+	struct usb_host_endpoint	*hep = urb->ep;
+	struct musb_qh			*qh = hep->hcpriv;
+	struct usb_endpoint_descriptor	*epd = &hep->desc;
+	int				ret;
+	unsigned			type_reg;
+	unsigned			interval;
+
+	/* host role must be active */
+	if (!is_host_active(musb) || !musb->is_active)
+		return -ENODEV;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	if (ret)
+		return ret;
+
+	/* DMA mapping was already done, if needed, and this urb is on
+	 * hep->urb_list ... so there's little to do unless hep wasn't
+	 * yet scheduled onto a live qh.
+	 *
+	 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
+	 * disabled, testing for empty qh->ring and avoiding qh setup costs
+	 * except for the first urb queued after a config change.
+	 */
+	if (qh) {
+		urb->hcpriv = qh;
+		return 0;
+	}
+
+	/* Allocate and initialize qh, minimizing the work done each time
+	 * hw_ep gets reprogrammed, or with irqs blocked.  Then schedule it.
+	 *
+	 * REVISIT consider a dedicated qh kmem_cache, so it's harder
+	 * for bugs in other kernel code to break this driver...
+	 */
+	qh = kzalloc(sizeof *qh, mem_flags);
+	if (!qh) {
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		return -ENOMEM;
+	}
+
+	qh->hep = hep;
+	qh->dev = urb->dev;
+	INIT_LIST_HEAD(&qh->ring);
+	qh->is_ready = 1;
+
+	qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+
+	/* no high bandwidth support yet */
+	if (qh->maxpacket & ~0x7ff) {
+		ret = -EMSGSIZE;
+		goto done;
+	}
+
+	qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
+	qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
+
+	/* precompute rxtype/txtype/type0 register */
+	type_reg = (qh->type << 4) | qh->epnum;
+	switch (urb->dev->speed) {
+	case USB_SPEED_LOW:
+		type_reg |= 0xc0;
+		break;
+	case USB_SPEED_FULL:
+		type_reg |= 0x80;
+		break;
+	default:
+		type_reg |= 0x40;
+	}
+	qh->type_reg = type_reg;
+
+	/* precompute rxinterval/txinterval register */
+	interval = min((u8)16, epd->bInterval);	/* log encoding */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_INT:
+		/* fullspeed uses linear encoding */
+		if (USB_SPEED_FULL == urb->dev->speed) {
+			interval = epd->bInterval;
+			if (!interval)
+				interval = 1;
+		}
+		/* FALLTHROUGH */
+	case USB_ENDPOINT_XFER_ISOC:
+		/* iso always uses log encoding */
+		break;
+	default:
+		/* REVISIT we actually want to use NAK limits, hinting to the
+		 * transfer scheduling logic to try some other qh, e.g. try
+		 * for 2 msec first:
+		 *
+		 * interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16 : 2;
+		 *
+		 * The downside of disabling this is that transfer scheduling
+		 * gets VERY unfair for nonperiodic transfers; a misbehaving
+		 * peripheral could make that hurt.  Or for reads, one that's
+		 * perfectly normal:  network and other drivers keep reads
+		 * posted at all times, having one pending for a week should
+		 * be perfectly safe.
+		 *
+		 * The upside of disabling it is avoidng transfer scheduling
+		 * code to put this aside for while.
+		 */
+		interval = 0;
+	}
+	qh->intv_reg = interval;
+
+	/* precompute addressing for external hub/tt ports */
+	if (musb->is_multipoint) {
+		struct usb_device	*parent = urb->dev->parent;
+
+		if (parent != hcd->self.root_hub) {
+			qh->h_addr_reg = (u8) parent->devnum;
+
+			/* set up tt info if needed */
+			if (urb->dev->tt) {
+				qh->h_port_reg = (u8) urb->dev->ttport;
+				qh->h_addr_reg |= 0x80;
+			}
+		}
+	}
+
+	/* invariant: hep->hcpriv is null OR the qh that's already scheduled.
+	 * until we get real dma queues (with an entry for each urb/buffer),
+	 * we only have work to do in the former case.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (hep->hcpriv) {
+		/* some concurrent activity submitted another urb to hep...
+		 * odd, rare, error prone, but legal.
+		 */
+		kfree(qh);
+		ret = 0;
+	} else
+		ret = musb_schedule(musb, qh,
+				epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK);
+
+	if (ret == 0) {
+		urb->hcpriv = qh;
+		/* FIXME set urb->start_frame for iso/intr, it's tested in
+		 * musb_start_urb(), but otherwise only konicawc cares ...
+		 */
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+done:
+	if (ret != 0) {
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		kfree(qh);
+	}
+	return ret;
+}
+
+
+/*
+ * abort a transfer that's at the head of a hardware queue.
+ * called with controller locked, irqs blocked
+ * that hardware queue advances to the next transfer, unless prevented
+ */
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
+{
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	void __iomem		*epio = ep->regs;
+	unsigned		hw_end = ep->epnum;
+	void __iomem		*regs = ep->musb->mregs;
+	u16			csr;
+	int			status = 0;
+
+	musb_ep_select(regs, hw_end);
+
+	if (is_dma_capable()) {
+		struct dma_channel	*dma;
+
+		dma = is_in ? ep->rx_channel : ep->tx_channel;
+		if (dma) {
+			status = ep->musb->dma_controller->channel_abort(dma);
+			DBG(status ? 1 : 3,
+				"abort %cX%d DMA for urb %p --> %d\n",
+				is_in ? 'R' : 'T', ep->epnum,
+				urb, status);
+			urb->actual_length += dma->actual_len;
+		}
+	}
+
+	/* turn off DMA requests, discard state, stop polling ... */
+	if (is_in) {
+		/* giveback saves bulk toggle */
+		csr = musb_h_flush_rxfifo(ep, 0);
+
+		/* REVISIT we still get an irq; should likely clear the
+		 * endpoint's irq status here to avoid bogus irqs.
+		 * clearing that status is platform-specific...
+		 */
+	} else {
+		musb_h_tx_flush_fifo(ep);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET
+			| MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_H_RXSTALL
+			| MUSB_TXCSR_H_NAKTIMEOUT
+			| MUSB_TXCSR_H_ERROR
+			| MUSB_TXCSR_TXPKTRDY);
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* flush cpu writebuffer */
+		csr = musb_readw(epio, MUSB_TXCSR);
+	}
+	if (status == 0)
+		musb_advance_schedule(ep->musb, urb, ep, is_in);
+	return status;
+}
+
+static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct musb		*musb = hcd_to_musb(hcd);
+	struct musb_qh		*qh;
+	struct list_head	*sched;
+	unsigned long		flags;
+	int			ret;
+
+	DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out");
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto done;
+
+	qh = urb->hcpriv;
+	if (!qh)
+		goto done;
+
+	/* Any URB not actively programmed into endpoint hardware can be
+	 * immediately given back.  Such an URB must be at the head of its
+	 * endpoint queue, unless someday we get real DMA queues.  And even
+	 * then, it might not be known to the hardware...
+	 *
+	 * Otherwise abort current transfer, pending dma, etc.; urb->status
+	 * has already been updated.  This is a synchronous abort; it'd be
+	 * OK to hold off until after some IRQ, though.
+	 */
+	if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list)
+		ret = -EINPROGRESS;
+	else {
+		switch (qh->type) {
+		case USB_ENDPOINT_XFER_CONTROL:
+			sched = &musb->control;
+			break;
+		case USB_ENDPOINT_XFER_BULK:
+			if (usb_pipein(urb->pipe))
+				sched = &musb->in_bulk;
+			else
+				sched = &musb->out_bulk;
+			break;
+		default:
+			/* REVISIT when we get a schedule tree, periodic
+			 * transfers won't always be at the head of a
+			 * singleton queue...
+			 */
+			sched = NULL;
+			break;
+		}
+	}
+
+	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+	if (ret < 0 || (sched && qh != first_qh(sched))) {
+		int	ready = qh->is_ready;
+
+		ret = 0;
+		qh->is_ready = 0;
+		__musb_giveback(musb, urb, 0);
+		qh->is_ready = ready;
+	} else
+		ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return ret;
+}
+
+/* disable an endpoint */
+static void
+musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+{
+	u8			epnum = hep->desc.bEndpointAddress;
+	unsigned long		flags;
+	struct musb		*musb = hcd_to_musb(hcd);
+	u8			is_in = epnum & USB_DIR_IN;
+	struct musb_qh		*qh = hep->hcpriv;
+	struct urb		*urb, *tmp;
+	struct list_head	*sched;
+
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		sched = &musb->control;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (is_in)
+			sched = &musb->in_bulk;
+		else
+			sched = &musb->out_bulk;
+		break;
+	default:
+		/* REVISIT when we get a schedule tree, periodic transfers
+		 * won't always be at the head of a singleton queue...
+		 */
+		sched = NULL;
+		break;
+	}
+
+	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+
+	/* kick first urb off the hardware, if needed */
+	qh->is_ready = 0;
+	if (!sched || qh == first_qh(sched)) {
+		urb = next_urb(qh);
+
+		/* make software (then hardware) stop ASAP */
+		if (!urb->unlinked)
+			urb->status = -ESHUTDOWN;
+
+		/* cleanup */
+		musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+	} else
+		urb = NULL;
+
+	/* then just nuke all the others */
+	list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
+		musb_giveback(qh, urb, -ESHUTDOWN);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int musb_h_get_frame_number(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	return musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_h_start(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	/* NOTE: musb_start() is called when the hub driver turns
+	 * on port power, or when (OTG) peripheral starts.
+	 */
+	hcd->state = HC_STATE_RUNNING;
+	musb->port1_status = 0;
+	return 0;
+}
+
+static void musb_h_stop(struct usb_hcd *hcd)
+{
+	musb_stop(hcd_to_musb(hcd));
+	hcd->state = HC_STATE_HALT;
+}
+
+static int musb_bus_suspend(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
+		return 0;
+
+	if (is_host_active(musb) && musb->is_active) {
+		WARNING("trying to suspend as %s is_active=%i\n",
+			otg_state_string(musb), musb->is_active);
+		return -EBUSY;
+	} else
+		return 0;
+}
+
+static int musb_bus_resume(struct usb_hcd *hcd)
+{
+	/* resuming child port does the work */
+	return 0;
+}
+
+const struct hc_driver musb_hc_driver = {
+	.description		= "musb-hcd",
+	.product_desc		= "MUSB HDRC host driver",
+	.hcd_priv_size		= sizeof(struct musb),
+	.flags			= HCD_USB2 | HCD_MEMORY,
+
+	/* not using irq handler or reset hooks from usbcore, since
+	 * those must be shared with peripheral code for OTG configs
+	 */
+
+	.start			= musb_h_start,
+	.stop			= musb_h_stop,
+
+	.get_frame_number	= musb_h_get_frame_number,
+
+	.urb_enqueue		= musb_urb_enqueue,
+	.urb_dequeue		= musb_urb_dequeue,
+	.endpoint_disable	= musb_h_disable,
+
+	.hub_status_data	= musb_hub_status_data,
+	.hub_control		= musb_hub_control,
+	.bus_suspend		= musb_bus_suspend,
+	.bus_resume		= musb_bus_resume,
+	/* .start_port_reset	= NULL, */
+	/* .hub_irq_enable	= NULL, */
+};
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
new file mode 100644
index 00000000000..77bcdb9d5b3
--- /dev/null
+++ b/drivers/usb/musb/musb_host.h
@@ -0,0 +1,110 @@
+/*
+ * MUSB OTG driver host defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef _MUSB_HOST_H
+#define _MUSB_HOST_H
+
+static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
+{
+	return container_of((void *) musb, struct usb_hcd, hcd_priv);
+}
+
+static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+	return (struct musb *) (hcd->hcd_priv);
+}
+
+/* stored in "usb_host_endpoint.hcpriv" for scheduled endpoints */
+struct musb_qh {
+	struct usb_host_endpoint *hep;		/* usbcore info */
+	struct usb_device	*dev;
+	struct musb_hw_ep	*hw_ep;		/* current binding */
+
+	struct list_head	ring;		/* of musb_qh */
+	/* struct musb_qh		*next; */	/* for periodic tree */
+
+	unsigned		offset;		/* in urb->transfer_buffer */
+	unsigned		segsize;	/* current xfer fragment */
+
+	u8			type_reg;	/* {rx,tx} type register */
+	u8			intv_reg;	/* {rx,tx} interval register */
+	u8			addr_reg;	/* device address register */
+	u8			h_addr_reg;	/* hub address register */
+	u8			h_port_reg;	/* hub port register */
+
+	u8			is_ready;	/* safe to modify hw_ep */
+	u8			type;		/* XFERTYPE_* */
+	u8			epnum;
+	u16			maxpacket;
+	u16			frame;		/* for periodic schedule */
+	unsigned		iso_idx;	/* in urb->iso_frame_desc[] */
+};
+
+/* map from control or bulk queue head to the first qh on that ring */
+static inline struct musb_qh *first_qh(struct list_head *q)
+{
+	if (list_empty(q))
+		return NULL;
+	return list_entry(q->next, struct musb_qh, ring);
+}
+
+
+extern void musb_root_disconnect(struct musb *musb);
+
+struct usb_hcd;
+
+extern int musb_hub_status_data(struct usb_hcd *hcd, char *buf);
+extern int musb_hub_control(struct usb_hcd *hcd,
+			u16 typeReq, u16 wValue, u16 wIndex,
+			char *buf, u16 wLength);
+
+extern const struct hc_driver musb_hc_driver;
+
+static inline struct urb *next_urb(struct musb_qh *qh)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	struct list_head	*queue;
+
+	if (!qh)
+		return NULL;
+	queue = &qh->hep->urb_list;
+	if (list_empty(queue))
+		return NULL;
+	return list_entry(queue->next, struct urb, urb_list);
+#else
+	return NULL;
+#endif
+}
+
+#endif				/* _MUSB_HOST_H */
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
new file mode 100644
index 00000000000..6bbedae83af
--- /dev/null
+++ b/drivers/usb/musb/musb_io.h
@@ -0,0 +1,115 @@
+/*
+ * MUSB OTG driver register I/O
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_PLATFORM_ARCH_H__
+#define __MUSB_LINUX_PLATFORM_ARCH_H__
+
+#include <linux/io.h>
+
+#ifndef	CONFIG_ARM
+static inline void readsl(const void __iomem *addr, void *buf, int len)
+	{ insl((unsigned long)addr, buf, len); }
+static inline void readsw(const void __iomem *addr, void *buf, int len)
+	{ insw((unsigned long)addr, buf, len); }
+static inline void readsb(const void __iomem *addr, void *buf, int len)
+	{ insb((unsigned long)addr, buf, len); }
+
+static inline void writesl(const void __iomem *addr, const void *buf, int len)
+	{ outsl((unsigned long)addr, buf, len); }
+static inline void writesw(const void __iomem *addr, const void *buf, int len)
+	{ outsw((unsigned long)addr, buf, len); }
+static inline void writesb(const void __iomem *addr, const void *buf, int len)
+	{ outsb((unsigned long)addr, buf, len); }
+
+#endif
+
+/* NOTE:  these offsets are all in bytes */
+
+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+	{ return __raw_readw(addr + offset); }
+
+static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
+	{ return __raw_readl(addr + offset); }
+
+
+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
+	{ __raw_writew(data, addr + offset); }
+
+static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+	{ __raw_writel(data, addr + offset); }
+
+
+#ifdef CONFIG_USB_TUSB6010
+
+/*
+ * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
+ */
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+{
+	u16 tmp;
+	u8 val;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		val = (tmp >> 8);
+	else
+		val = tmp & 0xff;
+
+	return val;
+}
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		tmp = (data << 8) | (tmp & 0xff);
+	else
+		tmp = (tmp & 0xff00) | data;
+
+	__raw_writew(tmp, addr + (offset & ~1));
+}
+
+#else
+
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+	{ return __raw_readb(addr + offset); }
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+	{ __raw_writeb(data, addr + offset); }
+
+#endif	/* CONFIG_USB_TUSB6010 */
+
+#endif
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
new file mode 100644
index 00000000000..9c228661aa5
--- /dev/null
+++ b/drivers/usb/musb/musb_regs.h
@@ -0,0 +1,300 @@
+/*
+ * MUSB OTG driver register defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_REGS_H__
+#define __MUSB_REGS_H__
+
+#define MUSB_EP0_FIFOSIZE	64	/* This is non-configurable */
+
+/*
+ * Common USB registers
+ */
+
+#define MUSB_FADDR		0x00	/* 8-bit */
+#define MUSB_POWER		0x01	/* 8-bit */
+
+#define MUSB_INTRTX		0x02	/* 16-bit */
+#define MUSB_INTRRX		0x04
+#define MUSB_INTRTXE		0x06
+#define MUSB_INTRRXE		0x08
+#define MUSB_INTRUSB		0x0A	/* 8 bit */
+#define MUSB_INTRUSBE		0x0B	/* 8 bit */
+#define MUSB_FRAME		0x0C
+#define MUSB_INDEX		0x0E	/* 8 bit */
+#define MUSB_TESTMODE		0x0F	/* 8 bit */
+
+/* Get offset for a given FIFO from musb->mregs */
+#ifdef	CONFIG_USB_TUSB6010
+#define MUSB_FIFO_OFFSET(epnum)	(0x200 + ((epnum) * 0x20))
+#else
+#define MUSB_FIFO_OFFSET(epnum)	(0x20 + ((epnum) * 4))
+#endif
+
+/*
+ * Additional Control Registers
+ */
+
+#define MUSB_DEVCTL		0x60	/* 8 bit */
+
+/* These are always controlled through the INDEX register */
+#define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */
+#define MUSB_RXFIFOSZ		0x63	/* 8-bit (see masks) */
+#define MUSB_TXFIFOADD		0x64	/* 16-bit offset shifted right 3 */
+#define MUSB_RXFIFOADD		0x66	/* 16-bit offset shifted right 3 */
+
+/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
+#define MUSB_HWVERS		0x6C	/* 8 bit */
+
+#define MUSB_EPINFO		0x78	/* 8 bit */
+#define MUSB_RAMINFO		0x79	/* 8 bit */
+#define MUSB_LINKINFO		0x7a	/* 8 bit */
+#define MUSB_VPLEN		0x7b	/* 8 bit */
+#define MUSB_HS_EOF1		0x7c	/* 8 bit */
+#define MUSB_FS_EOF1		0x7d	/* 8 bit */
+#define MUSB_LS_EOF1		0x7e	/* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP		0x00
+#define MUSB_TXCSR		0x02
+#define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
+#define MUSB_RXMAXP		0x04
+#define MUSB_RXCSR		0x06
+#define MUSB_RXCOUNT		0x08
+#define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
+#define MUSB_TXTYPE		0x0A
+#define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
+#define MUSB_TXINTERVAL		0x0B
+#define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
+#define MUSB_RXTYPE		0x0C
+#define MUSB_RXINTERVAL		0x0D
+#define MUSB_FIFOSIZE		0x0F
+#define MUSB_CONFIGDATA		MUSB_FIFOSIZE	/* Re-used for EP0 */
+
+/* Offsets to endpoint registers in indexed model (using INDEX register) */
+#define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
+	(0x10 + (_offset))
+
+/* Offsets to endpoint registers in flat models */
+#define MUSB_FLAT_OFFSET(_epnum, _offset)	\
+	(0x100 + (0x10*(_epnum)) + (_offset))
+
+#ifdef CONFIG_USB_TUSB6010
+/* TUSB6010 EP0 configuration register is special */
+#define MUSB_TUSB_OFFSET(_epnum, _offset)	\
+	(0x10 + _offset)
+#include "tusb6010.h"		/* Needed "only" for TUSB_EP0_CONF */
+#endif
+
+/* "bus control"/target registers, for host side multipoint (external hubs) */
+#define MUSB_TXFUNCADDR		0x00
+#define MUSB_TXHUBADDR		0x02
+#define MUSB_TXHUBPORT		0x03
+
+#define MUSB_RXFUNCADDR		0x04
+#define MUSB_RXHUBADDR		0x06
+#define MUSB_RXHUBPORT		0x07
+
+#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
+	(0x80 + (8*(_epnum)) + (_offset))
+
+/*
+ * MUSB Register bits
+ */
+
+/* POWER */
+#define MUSB_POWER_ISOUPDATE	0x80
+#define MUSB_POWER_SOFTCONN	0x40
+#define MUSB_POWER_HSENAB	0x20
+#define MUSB_POWER_HSMODE	0x10
+#define MUSB_POWER_RESET	0x08
+#define MUSB_POWER_RESUME	0x04
+#define MUSB_POWER_SUSPENDM	0x02
+#define MUSB_POWER_ENSUSPEND	0x01
+
+/* INTRUSB */
+#define MUSB_INTR_SUSPEND	0x01
+#define MUSB_INTR_RESUME	0x02
+#define MUSB_INTR_RESET		0x04
+#define MUSB_INTR_BABBLE	0x04
+#define MUSB_INTR_SOF		0x08
+#define MUSB_INTR_CONNECT	0x10
+#define MUSB_INTR_DISCONNECT	0x20
+#define MUSB_INTR_SESSREQ	0x40
+#define MUSB_INTR_VBUSERROR	0x80	/* For SESSION end */
+
+/* DEVCTL */
+#define MUSB_DEVCTL_BDEVICE	0x80
+#define MUSB_DEVCTL_FSDEV	0x40
+#define MUSB_DEVCTL_LSDEV	0x20
+#define MUSB_DEVCTL_VBUS	0x18
+#define MUSB_DEVCTL_VBUS_SHIFT	3
+#define MUSB_DEVCTL_HM		0x04
+#define MUSB_DEVCTL_HR		0x02
+#define MUSB_DEVCTL_SESSION	0x01
+
+/* TESTMODE */
+#define MUSB_TEST_FORCE_HOST	0x80
+#define MUSB_TEST_FIFO_ACCESS	0x40
+#define MUSB_TEST_FORCE_FS	0x20
+#define MUSB_TEST_FORCE_HS	0x10
+#define MUSB_TEST_PACKET	0x08
+#define MUSB_TEST_K		0x04
+#define MUSB_TEST_J		0x02
+#define MUSB_TEST_SE0_NAK	0x01
+
+/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
+#define MUSB_FIFOSZ_DPB	0x10
+/* Allocation size (8, 16, 32, ... 4096) */
+#define MUSB_FIFOSZ_SIZE	0x0f
+
+/* CSR0 */
+#define MUSB_CSR0_FLUSHFIFO	0x0100
+#define MUSB_CSR0_TXPKTRDY	0x0002
+#define MUSB_CSR0_RXPKTRDY	0x0001
+
+/* CSR0 in Peripheral mode */
+#define MUSB_CSR0_P_SVDSETUPEND	0x0080
+#define MUSB_CSR0_P_SVDRXPKTRDY	0x0040
+#define MUSB_CSR0_P_SENDSTALL	0x0020
+#define MUSB_CSR0_P_SETUPEND	0x0010
+#define MUSB_CSR0_P_DATAEND	0x0008
+#define MUSB_CSR0_P_SENTSTALL	0x0004
+
+/* CSR0 in Host mode */
+#define MUSB_CSR0_H_DIS_PING		0x0800
+#define MUSB_CSR0_H_WR_DATATOGGLE	0x0400	/* Set to allow setting: */
+#define MUSB_CSR0_H_DATATOGGLE		0x0200	/* Data toggle control */
+#define MUSB_CSR0_H_NAKTIMEOUT		0x0080
+#define MUSB_CSR0_H_STATUSPKT		0x0040
+#define MUSB_CSR0_H_REQPKT		0x0020
+#define MUSB_CSR0_H_ERROR		0x0010
+#define MUSB_CSR0_H_SETUPPKT		0x0008
+#define MUSB_CSR0_H_RXSTALL		0x0004
+
+/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_CSR0_P_WZC_BITS	\
+	(MUSB_CSR0_P_SENTSTALL)
+#define MUSB_CSR0_H_WZC_BITS	\
+	(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
+	| MUSB_CSR0_RXPKTRDY)
+
+/* TxType/RxType */
+#define MUSB_TYPE_SPEED		0xc0
+#define MUSB_TYPE_SPEED_SHIFT	6
+#define MUSB_TYPE_PROTO		0x30	/* Implicitly zero for ep0 */
+#define MUSB_TYPE_PROTO_SHIFT	4
+#define MUSB_TYPE_REMOTE_END	0xf	/* Implicitly zero for ep0 */
+
+/* CONFIGDATA */
+#define MUSB_CONFIGDATA_MPRXE		0x80	/* Auto bulk pkt combining */
+#define MUSB_CONFIGDATA_MPTXE		0x40	/* Auto bulk pkt splitting */
+#define MUSB_CONFIGDATA_BIGENDIAN	0x20
+#define MUSB_CONFIGDATA_HBRXE		0x10	/* HB-ISO for RX */
+#define MUSB_CONFIGDATA_HBTXE		0x08	/* HB-ISO for TX */
+#define MUSB_CONFIGDATA_DYNFIFO		0x04	/* Dynamic FIFO sizing */
+#define MUSB_CONFIGDATA_SOFTCONE	0x02	/* SoftConnect */
+#define MUSB_CONFIGDATA_UTMIDW		0x01	/* Data width 0/1 => 8/16bits */
+
+/* TXCSR in Peripheral and Host mode */
+#define MUSB_TXCSR_AUTOSET		0x8000
+#define MUSB_TXCSR_MODE			0x2000
+#define MUSB_TXCSR_DMAENAB		0x1000
+#define MUSB_TXCSR_FRCDATATOG		0x0800
+#define MUSB_TXCSR_DMAMODE		0x0400
+#define MUSB_TXCSR_CLRDATATOG		0x0040
+#define MUSB_TXCSR_FLUSHFIFO		0x0008
+#define MUSB_TXCSR_FIFONOTEMPTY		0x0002
+#define MUSB_TXCSR_TXPKTRDY		0x0001
+
+/* TXCSR in Peripheral mode */
+#define MUSB_TXCSR_P_ISO		0x4000
+#define MUSB_TXCSR_P_INCOMPTX		0x0080
+#define MUSB_TXCSR_P_SENTSTALL		0x0020
+#define MUSB_TXCSR_P_SENDSTALL		0x0010
+#define MUSB_TXCSR_P_UNDERRUN		0x0004
+
+/* TXCSR in Host mode */
+#define MUSB_TXCSR_H_WR_DATATOGGLE	0x0200
+#define MUSB_TXCSR_H_DATATOGGLE		0x0100
+#define MUSB_TXCSR_H_NAKTIMEOUT		0x0080
+#define MUSB_TXCSR_H_RXSTALL		0x0020
+#define MUSB_TXCSR_H_ERROR		0x0004
+
+/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_TXCSR_P_WZC_BITS	\
+	(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
+	| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
+#define MUSB_TXCSR_H_WZC_BITS	\
+	(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+	| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
+/* RXCSR in Peripheral and Host mode */
+#define MUSB_RXCSR_AUTOCLEAR		0x8000
+#define MUSB_RXCSR_DMAENAB		0x2000
+#define MUSB_RXCSR_DISNYET		0x1000
+#define MUSB_RXCSR_PID_ERR		0x1000
+#define MUSB_RXCSR_DMAMODE		0x0800
+#define MUSB_RXCSR_INCOMPRX		0x0100
+#define MUSB_RXCSR_CLRDATATOG		0x0080
+#define MUSB_RXCSR_FLUSHFIFO		0x0010
+#define MUSB_RXCSR_DATAERROR		0x0008
+#define MUSB_RXCSR_FIFOFULL		0x0002
+#define MUSB_RXCSR_RXPKTRDY		0x0001
+
+/* RXCSR in Peripheral mode */
+#define MUSB_RXCSR_P_ISO		0x4000
+#define MUSB_RXCSR_P_SENTSTALL		0x0040
+#define MUSB_RXCSR_P_SENDSTALL		0x0020
+#define MUSB_RXCSR_P_OVERRUN		0x0004
+
+/* RXCSR in Host mode */
+#define MUSB_RXCSR_H_AUTOREQ		0x4000
+#define MUSB_RXCSR_H_WR_DATATOGGLE	0x0400
+#define MUSB_RXCSR_H_DATATOGGLE		0x0200
+#define MUSB_RXCSR_H_RXSTALL		0x0040
+#define MUSB_RXCSR_H_REQPKT		0x0020
+#define MUSB_RXCSR_H_ERROR		0x0004
+
+/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_RXCSR_P_WZC_BITS	\
+	(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
+	| MUSB_RXCSR_RXPKTRDY)
+#define MUSB_RXCSR_H_WZC_BITS	\
+	(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
+	| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
+
+/* HUBADDR */
+#define MUSB_HUBADDR_MULTI_TT		0x80
+
+#endif	/* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
new file mode 100644
index 00000000000..e0e9ce58417
--- /dev/null
+++ b/drivers/usb/musb/musb_virthub.c
@@ -0,0 +1,425 @@
+/*
+ * MUSB OTG driver virtual root hub support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#include <asm/unaligned.h>
+
+#include "musb_core.h"
+
+
+static void musb_port_suspend(struct musb *musb, bool do_suspend)
+{
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  this doesn't necessarily put PHY into low power mode,
+	 * turning off its clock; that's a function of PHY integration and
+	 * MUSB_POWER_ENSUSPEND.  PHY may need a clock (sigh) to detect
+	 * SE0 changing to connect (J) or wakeup (K) states.
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_suspend) {
+		int retries = 10000;
+
+		power &= ~MUSB_POWER_RESUME;
+		power |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		/* Needed for OPT A tests */
+		power = musb_readb(mbase, MUSB_POWER);
+		while (power & MUSB_POWER_SUSPENDM) {
+			power = musb_readb(mbase, MUSB_POWER);
+			if (retries-- < 1)
+				break;
+		}
+
+		DBG(3, "Root port suspended, power %02x\n", power);
+
+		musb->port1_status |= USB_PORT_STAT_SUSPEND;
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_HOST:
+			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			musb_platform_try_idle(musb, 0);
+			break;
+#ifdef	CONFIG_USB_MUSB_OTG
+		case OTG_STATE_B_HOST:
+			musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			musb_platform_try_idle(musb, 0);
+			break;
+#endif
+		default:
+			DBG(1, "bogus rh suspend? %s\n",
+				otg_state_string(musb));
+		}
+	} else if (power & MUSB_POWER_SUSPENDM) {
+		power &= ~MUSB_POWER_SUSPENDM;
+		power |= MUSB_POWER_RESUME;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		DBG(3, "Root port resuming, power %02x\n", power);
+
+		/* later, GetPortStatus will stop RESUME signaling */
+		musb->port1_status |= MUSB_PORT_STAT_RESUME;
+		musb->rh_timer = jiffies + msecs_to_jiffies(20);
+	}
+}
+
+static void musb_port_reset(struct musb *musb, bool do_reset)
+{
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+#ifdef CONFIG_USB_MUSB_OTG
+	if (musb->xceiv.state == OTG_STATE_B_IDLE) {
+		DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		return;
+	}
+#endif
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  caller guarantees it will turn off the reset when
+	 * the appropriate amount of time has passed
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_reset) {
+
+		/*
+		 * If RESUME is set, we must make sure it stays minimum 20 ms.
+		 * Then we must clear RESUME and wait a bit to let musb start
+		 * generating SOFs. If we don't do this, OPT HS A 6.8 tests
+		 * fail with "Error! Did not receive an SOF before suspend
+		 * detected".
+		 */
+		if (power &  MUSB_POWER_RESUME) {
+			while (time_before(jiffies, musb->rh_timer))
+				msleep(1);
+			musb_writeb(mbase, MUSB_POWER,
+				power & ~MUSB_POWER_RESUME);
+			msleep(1);
+		}
+
+		musb->ignore_disconnect = true;
+		power &= 0xf0;
+		musb_writeb(mbase, MUSB_POWER,
+				power | MUSB_POWER_RESET);
+
+		musb->port1_status |= USB_PORT_STAT_RESET;
+		musb->port1_status &= ~USB_PORT_STAT_ENABLE;
+		musb->rh_timer = jiffies + msecs_to_jiffies(50);
+	} else {
+		DBG(4, "root port reset stopped\n");
+		musb_writeb(mbase, MUSB_POWER,
+				power & ~MUSB_POWER_RESET);
+
+		musb->ignore_disconnect = false;
+
+		power = musb_readb(mbase, MUSB_POWER);
+		if (power & MUSB_POWER_HSMODE) {
+			DBG(4, "high-speed device connected\n");
+			musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
+		}
+
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		musb->port1_status |= USB_PORT_STAT_ENABLE
+					| (USB_PORT_STAT_C_RESET << 16)
+					| (USB_PORT_STAT_C_ENABLE << 16);
+		usb_hcd_poll_rh_status(musb_to_hcd(musb));
+
+		musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+	}
+}
+
+void musb_root_disconnect(struct musb *musb)
+{
+	musb->port1_status = (1 << USB_PORT_FEAT_POWER)
+			| (1 << USB_PORT_FEAT_C_CONNECTION);
+
+	usb_hcd_poll_rh_status(musb_to_hcd(musb));
+	musb->is_active = 0;
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_HOST:
+	case OTG_STATE_A_SUSPEND:
+		musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		break;
+	default:
+		DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
+	}
+}
+
+
+/*---------------------------------------------------------------------*/
+
+/* Caller may or may not hold musb->lock */
+int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	int		retval = 0;
+
+	/* called in_irq() via usb_hcd_poll_rh_status() */
+	if (musb->port1_status & 0xffff0000) {
+		*buf = 0x02;
+		retval = 1;
+	}
+	return retval;
+}
+
+int musb_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	u32		temp;
+	int		retval = 0;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+		spin_unlock_irqrestore(&musb->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	/* hub features:  always zero, setting is a NOP
+	 * port features: reported, sometimes updated when host is active
+	 * no indicators
+	 */
+	switch (typeReq) {
+	case ClearHubFeature:
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, false);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+				musb_set_vbus(musb, 0);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_SUSPEND:
+			break;
+		default:
+			goto error;
+		}
+		DBG(5, "clear feature %d\n", wValue);
+		musb->port1_status &= ~(1 << wValue);
+		break;
+	case GetHubDescriptor:
+		{
+		struct usb_hub_descriptor *desc = (void *)buf;
+
+		desc->bDescLength = 9;
+		desc->bDescriptorType = 0x29;
+		desc->bNbrPorts = 1;
+		desc->wHubCharacteristics = __constant_cpu_to_le16(
+				  0x0001	/* per-port power switching */
+				| 0x0010	/* no overcurrent reporting */
+				);
+		desc->bPwrOn2PwrGood = 5;	/* msec/2 */
+		desc->bHubContrCurrent = 0;
+
+		/* workaround bogus struct definition */
+		desc->DeviceRemovable[0] = 0x02;	/* port 1 */
+		desc->DeviceRemovable[1] = 0xff;
+		}
+		break;
+	case GetHubStatus:
+		temp = 0;
+		*(__le32 *) buf = cpu_to_le32(temp);
+		break;
+	case GetPortStatus:
+		if (wIndex != 1)
+			goto error;
+
+		/* finish RESET signaling? */
+		if ((musb->port1_status & USB_PORT_STAT_RESET)
+				&& time_after_eq(jiffies, musb->rh_timer))
+			musb_port_reset(musb, false);
+
+		/* finish RESUME signaling? */
+		if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
+				&& time_after_eq(jiffies, musb->rh_timer)) {
+			u8		power;
+
+			power = musb_readb(musb->mregs, MUSB_POWER);
+			power &= ~MUSB_POWER_RESUME;
+			DBG(4, "root port resume stopped, power %02x\n",
+					power);
+			musb_writeb(musb->mregs, MUSB_POWER, power);
+
+			/* ISSUE:  DaVinci (RTL 1.300) disconnects after
+			 * resume of high speed peripherals (but not full
+			 * speed ones).
+			 */
+
+			musb->is_active = 1;
+			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+					| MUSB_PORT_STAT_RESUME);
+			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+			usb_hcd_poll_rh_status(musb_to_hcd(musb));
+			/* NOTE: it might really be A_WAIT_BCON ... */
+			musb->xceiv.state = OTG_STATE_A_HOST;
+		}
+
+		put_unaligned(cpu_to_le32(musb->port1_status
+					& ~MUSB_PORT_STAT_RESUME),
+				(__le32 *) buf);
+
+		/* port change status is more interesting */
+		DBG(get_unaligned((u16 *)(buf+2)) ? 2 : 5, "port status %08x\n",
+				musb->port1_status);
+		break;
+	case SetPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			/* NOTE: this controller has a strange state machine
+			 * that involves "requesting sessions" according to
+			 * magic side effects from incompletely-described
+			 * rules about startup...
+			 *
+			 * This call is what really starts the host mode; be
+			 * very careful about side effects if you reorder any
+			 * initialization logic, e.g. for OTG, or change any
+			 * logic relating to VBUS power-up.
+			 */
+			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+				musb_start(musb);
+			break;
+		case USB_PORT_FEAT_RESET:
+			musb_port_reset(musb, true);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, true);
+			break;
+		case USB_PORT_FEAT_TEST:
+			if (unlikely(is_host_active(musb)))
+				goto error;
+
+			wIndex >>= 8;
+			switch (wIndex) {
+			case 1:
+				pr_debug("TEST_J\n");
+				temp = MUSB_TEST_J;
+				break;
+			case 2:
+				pr_debug("TEST_K\n");
+				temp = MUSB_TEST_K;
+				break;
+			case 3:
+				pr_debug("TEST_SE0_NAK\n");
+				temp = MUSB_TEST_SE0_NAK;
+				break;
+			case 4:
+				pr_debug("TEST_PACKET\n");
+				temp = MUSB_TEST_PACKET;
+				musb_load_testpacket(musb);
+				break;
+			case 5:
+				pr_debug("TEST_FORCE_ENABLE\n");
+				temp = MUSB_TEST_FORCE_HOST
+					| MUSB_TEST_FORCE_HS;
+
+				musb_writeb(musb->mregs, MUSB_DEVCTL,
+						MUSB_DEVCTL_SESSION);
+				break;
+			case 6:
+				pr_debug("TEST_FIFO_ACCESS\n");
+				temp = MUSB_TEST_FIFO_ACCESS;
+				break;
+			default:
+				goto error;
+			}
+			musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
+			break;
+		default:
+			goto error;
+		}
+		DBG(5, "set feature %d\n", wValue);
+		musb->port1_status |= 1 << wValue;
+		break;
+
+	default:
+error:
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return retval;
+}
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
new file mode 100644
index 00000000000..9ba8fb7fcd2
--- /dev/null
+++ b/drivers/usb/musb/musbhsdma.c
@@ -0,0 +1,433 @@
+/*
+ * MUSB OTG driver - support for Mentor's DMA controller
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2007 by Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include "musb_core.h"
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include "omap2430.h"
+#endif
+
+#define MUSB_HSDMA_BASE		0x200
+#define MUSB_HSDMA_INTR		(MUSB_HSDMA_BASE + 0)
+#define MUSB_HSDMA_CONTROL		0x4
+#define MUSB_HSDMA_ADDRESS		0x8
+#define MUSB_HSDMA_COUNT		0xc
+
+#define MUSB_HSDMA_CHANNEL_OFFSET(_bChannel, _offset)		\
+		(MUSB_HSDMA_BASE + (_bChannel << 4) + _offset)
+
+/* control register (16-bit): */
+#define MUSB_HSDMA_ENABLE_SHIFT		0
+#define MUSB_HSDMA_TRANSMIT_SHIFT		1
+#define MUSB_HSDMA_MODE1_SHIFT		2
+#define MUSB_HSDMA_IRQENABLE_SHIFT		3
+#define MUSB_HSDMA_ENDPOINT_SHIFT		4
+#define MUSB_HSDMA_BUSERROR_SHIFT		8
+#define MUSB_HSDMA_BURSTMODE_SHIFT		9
+#define MUSB_HSDMA_BURSTMODE		(3 << MUSB_HSDMA_BURSTMODE_SHIFT)
+#define MUSB_HSDMA_BURSTMODE_UNSPEC	0
+#define MUSB_HSDMA_BURSTMODE_INCR4	1
+#define MUSB_HSDMA_BURSTMODE_INCR8	2
+#define MUSB_HSDMA_BURSTMODE_INCR16	3
+
+#define MUSB_HSDMA_CHANNELS		8
+
+struct musb_dma_controller;
+
+struct musb_dma_channel {
+	struct dma_channel		Channel;
+	struct musb_dma_controller	*controller;
+	u32				dwStartAddress;
+	u32				len;
+	u16				wMaxPacketSize;
+	u8				bIndex;
+	u8				epnum;
+	u8				transmit;
+};
+
+struct musb_dma_controller {
+	struct dma_controller		Controller;
+	struct musb_dma_channel		aChannel[MUSB_HSDMA_CHANNELS];
+	void				*pDmaPrivate;
+	void __iomem			*pCoreBase;
+	u8				bChannelCount;
+	u8				bmUsedChannels;
+	u8				irq;
+};
+
+static int dma_controller_start(struct dma_controller *c)
+{
+	/* nothing to do */
+	return 0;
+}
+
+static void dma_channel_release(struct dma_channel *pChannel);
+
+static int dma_controller_stop(struct dma_controller *c)
+{
+	struct musb_dma_controller *controller =
+		container_of(c, struct musb_dma_controller, Controller);
+	struct musb *musb = (struct musb *) controller->pDmaPrivate;
+	struct dma_channel *pChannel;
+	u8 bBit;
+
+	if (controller->bmUsedChannels != 0) {
+		dev_err(musb->controller,
+			"Stopping DMA controller while channel active\n");
+
+		for (bBit = 0; bBit < MUSB_HSDMA_CHANNELS; bBit++) {
+			if (controller->bmUsedChannels & (1 << bBit)) {
+				pChannel = &controller->aChannel[bBit].Channel;
+				dma_channel_release(pChannel);
+
+				if (!controller->bmUsedChannels)
+					break;
+			}
+		}
+	}
+	return 0;
+}
+
+static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
+				struct musb_hw_ep *hw_ep, u8 transmit)
+{
+	u8 bBit;
+	struct dma_channel *pChannel = NULL;
+	struct musb_dma_channel *pImplChannel = NULL;
+	struct musb_dma_controller *controller =
+			container_of(c, struct musb_dma_controller, Controller);
+
+	for (bBit = 0; bBit < MUSB_HSDMA_CHANNELS; bBit++) {
+		if (!(controller->bmUsedChannels & (1 << bBit))) {
+			controller->bmUsedChannels |= (1 << bBit);
+			pImplChannel = &(controller->aChannel[bBit]);
+			pImplChannel->controller = controller;
+			pImplChannel->bIndex = bBit;
+			pImplChannel->epnum = hw_ep->epnum;
+			pImplChannel->transmit = transmit;
+			pChannel = &(pImplChannel->Channel);
+			pChannel->private_data = pImplChannel;
+			pChannel->status = MUSB_DMA_STATUS_FREE;
+			pChannel->max_len = 0x10000;
+			/* Tx => mode 1; Rx => mode 0 */
+			pChannel->desired_mode = transmit;
+			pChannel->actual_len = 0;
+			break;
+		}
+	}
+	return pChannel;
+}
+
+static void dma_channel_release(struct dma_channel *pChannel)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+
+	pChannel->actual_len = 0;
+	pImplChannel->dwStartAddress = 0;
+	pImplChannel->len = 0;
+
+	pImplChannel->controller->bmUsedChannels &=
+		~(1 << pImplChannel->bIndex);
+
+	pChannel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+static void configure_channel(struct dma_channel *pChannel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+	struct musb_dma_controller *controller = pImplChannel->controller;
+	void __iomem *mbase = controller->pCoreBase;
+	u8 bChannel = pImplChannel->bIndex;
+	u16 csr = 0;
+
+	DBG(4, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n",
+			pChannel, packet_sz, dma_addr, len, mode);
+
+	if (mode) {
+		csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
+		BUG_ON(len < packet_sz);
+
+		if (packet_sz >= 64) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR16
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		} else if (packet_sz >= 32) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR8
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		} else if (packet_sz >= 16) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR4
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		}
+	}
+
+	csr |= (pImplChannel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
+		| (1 << MUSB_HSDMA_ENABLE_SHIFT)
+		| (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
+		| (pImplChannel->transmit
+				? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
+				: 0);
+
+	/* address/count */
+	musb_writel(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
+		dma_addr);
+	musb_writel(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
+		len);
+
+	/* control (this should start things) */
+	musb_writew(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
+		csr);
+}
+
+static int dma_channel_program(struct dma_channel *pChannel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct musb_dma_channel *pImplChannel =
+			(struct musb_dma_channel *) pChannel->private_data;
+
+	DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
+		pImplChannel->epnum,
+		pImplChannel->transmit ? "Tx" : "Rx",
+		packet_sz, dma_addr, len, mode);
+
+	BUG_ON(pChannel->status == MUSB_DMA_STATUS_UNKNOWN ||
+		pChannel->status == MUSB_DMA_STATUS_BUSY);
+
+	pChannel->actual_len = 0;
+	pImplChannel->dwStartAddress = dma_addr;
+	pImplChannel->len = len;
+	pImplChannel->wMaxPacketSize = packet_sz;
+	pChannel->status = MUSB_DMA_STATUS_BUSY;
+
+	if ((mode == 1) && (len >= packet_sz))
+		configure_channel(pChannel, packet_sz, 1, dma_addr, len);
+	else
+		configure_channel(pChannel, packet_sz, 0, dma_addr, len);
+
+	return true;
+}
+
+static int dma_channel_abort(struct dma_channel *pChannel)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+	u8 bChannel = pImplChannel->bIndex;
+	void __iomem *mbase = pImplChannel->controller->pCoreBase;
+	u16 csr;
+
+	if (pChannel->status == MUSB_DMA_STATUS_BUSY) {
+		if (pImplChannel->transmit) {
+
+			csr = musb_readw(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_TXCSR));
+			csr &= ~(MUSB_TXCSR_AUTOSET |
+				 MUSB_TXCSR_DMAENAB |
+				 MUSB_TXCSR_DMAMODE);
+			musb_writew(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_TXCSR),
+				csr);
+		} else {
+			csr = musb_readw(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_RXCSR));
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
+				 MUSB_RXCSR_DMAENAB |
+				 MUSB_RXCSR_DMAMODE);
+			musb_writew(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_RXCSR),
+				csr);
+		}
+
+		musb_writew(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
+			0);
+		musb_writel(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
+			0);
+		musb_writel(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
+			0);
+
+		pChannel->status = MUSB_DMA_STATUS_FREE;
+	}
+	return 0;
+}
+
+static irqreturn_t dma_controller_irq(int irq, void *private_data)
+{
+	struct musb_dma_controller *controller =
+		(struct musb_dma_controller *)private_data;
+	struct musb_dma_channel *pImplChannel;
+	struct musb *musb = controller->pDmaPrivate;
+	void __iomem *mbase = controller->pCoreBase;
+	struct dma_channel *pChannel;
+	u8 bChannel;
+	u16 csr;
+	u32 dwAddress;
+	u8 int_hsdma;
+	irqreturn_t retval = IRQ_NONE;
+	unsigned long flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
+	if (!int_hsdma)
+		goto done;
+
+	for (bChannel = 0; bChannel < MUSB_HSDMA_CHANNELS; bChannel++) {
+		if (int_hsdma & (1 << bChannel)) {
+			pImplChannel = (struct musb_dma_channel *)
+					&(controller->aChannel[bChannel]);
+			pChannel = &pImplChannel->Channel;
+
+			csr = musb_readw(mbase,
+					MUSB_HSDMA_CHANNEL_OFFSET(bChannel,
+							MUSB_HSDMA_CONTROL));
+
+			if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT))
+				pImplChannel->Channel.status =
+					MUSB_DMA_STATUS_BUS_ABORT;
+			else {
+				u8 devctl;
+
+				dwAddress = musb_readl(mbase,
+						MUSB_HSDMA_CHANNEL_OFFSET(
+							bChannel,
+							MUSB_HSDMA_ADDRESS));
+				pChannel->actual_len = dwAddress
+					- pImplChannel->dwStartAddress;
+
+				DBG(2, "ch %p, 0x%x -> 0x%x (%d / %d) %s\n",
+					pChannel, pImplChannel->dwStartAddress,
+					dwAddress, pChannel->actual_len,
+					pImplChannel->len,
+					(pChannel->actual_len
+						< pImplChannel->len) ?
+					"=> reconfig 0" : "=> complete");
+
+				devctl = musb_readb(mbase, MUSB_DEVCTL);
+
+				pChannel->status = MUSB_DMA_STATUS_FREE;
+
+				/* completed */
+				if ((devctl & MUSB_DEVCTL_HM)
+					&& (pImplChannel->transmit)
+					&& ((pChannel->desired_mode == 0)
+					    || (pChannel->actual_len &
+					    (pImplChannel->wMaxPacketSize - 1)))
+					 ) {
+					/* Send out the packet */
+					musb_ep_select(mbase,
+						pImplChannel->epnum);
+					musb_writew(mbase, MUSB_EP_OFFSET(
+							pImplChannel->epnum,
+							MUSB_TXCSR),
+						MUSB_TXCSR_TXPKTRDY);
+				} else
+					musb_dma_completion(
+						musb,
+						pImplChannel->epnum,
+						pImplChannel->transmit);
+			}
+		}
+	}
+	retval = IRQ_HANDLED;
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return retval;
+}
+
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct musb_dma_controller *controller;
+
+	controller = container_of(c, struct musb_dma_controller, Controller);
+	if (!controller)
+		return;
+
+	if (controller->irq)
+		free_irq(controller->irq, c);
+
+	kfree(controller);
+}
+
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *pCoreBase)
+{
+	struct musb_dma_controller *controller;
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev);
+	int irq = platform_get_irq(pdev, 1);
+
+	if (irq == 0) {
+		dev_err(dev, "No DMA interrupt line!\n");
+		return NULL;
+	}
+
+	controller = kzalloc(sizeof(struct musb_dma_controller), GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	controller->bChannelCount = MUSB_HSDMA_CHANNELS;
+	controller->pDmaPrivate = musb;
+	controller->pCoreBase = pCoreBase;
+
+	controller->Controller.start = dma_controller_start;
+	controller->Controller.stop = dma_controller_stop;
+	controller->Controller.channel_alloc = dma_channel_allocate;
+	controller->Controller.channel_release = dma_channel_release;
+	controller->Controller.channel_program = dma_channel_program;
+	controller->Controller.channel_abort = dma_channel_abort;
+
+	if (request_irq(irq, dma_controller_irq, IRQF_DISABLED,
+			musb->controller->bus_id, &controller->Controller)) {
+		dev_err(dev, "request_irq %d failed!\n", irq);
+		dma_controller_destroy(&controller->Controller);
+		return NULL;
+	}
+
+	controller->irq = irq;
+
+	return &controller->Controller;
+}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
new file mode 100644
index 00000000000..298b22e6ad0
--- /dev/null
+++ b/drivers/usb/musb/omap2430.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright (C) 2005-2007 by Texas Instruments
+ * Some code has been taken from tusb6010.c
+ * Copyrights for that are attributable to:
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+
+#include "musb_core.h"
+#include "omap2430.h"
+
+#ifdef CONFIG_ARCH_OMAP3430
+#define	get_cpu_rev()	2
+#endif
+
+#define MUSB_TIMEOUT_A_WAIT_BCON	1100
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+	struct musb	*musb = (void *)_musb;
+	unsigned long	flags;
+	u8	power;
+	u8	devctl;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_BCON:
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE) {
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		} else {
+			musb->xceiv.state = OTG_STATE_A_IDLE;
+			MUSB_HST_MODE(musb);
+		}
+		break;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case OTG_STATE_A_SUSPEND:
+		/* finish RESUME signaling? */
+		if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
+			power = musb_readb(musb->mregs, MUSB_POWER);
+			power &= ~MUSB_POWER_RESUME;
+			DBG(1, "root port resume stopped, power %02x\n", power);
+			musb_writeb(musb->mregs, MUSB_POWER, power);
+			musb->is_active = 1;
+			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+						| MUSB_PORT_STAT_RESUME);
+			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+			usb_hcd_poll_rh_status(musb_to_hcd(musb));
+			/* NOTE: it might really be A_WAIT_BCON ... */
+			musb->xceiv.state = OTG_STATE_A_HOST;
+		}
+		break;
+#endif
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case OTG_STATE_A_HOST:
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl &  MUSB_DEVCTL_BDEVICE)
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+		else
+			musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+#endif
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
+	static unsigned long	last_timer;
+
+	if (timeout == 0)
+		timeout = default_timeout;
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || ((musb->a_wait_bcon == 0)
+			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+		del_timer(&musb_idle_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout)) {
+		if (!timer_pending(&musb_idle_timer))
+			last_timer = timeout;
+		else {
+			DBG(4, "Longer idle timer already pending, ignoring\n");
+			return;
+		}
+	}
+	last_timer = timeout;
+
+	DBG(4, "%s inactive, for idle timer for %lu ms\n",
+		otg_state_string(musb),
+		(unsigned long)jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb_idle_timer, timeout);
+}
+
+void musb_platform_enable(struct musb *musb)
+{
+}
+void musb_platform_disable(struct musb *musb)
+{
+}
+static void omap_vbus_power(struct musb *musb, int is_on, int sleeping)
+{
+}
+
+static void omap_set_vbus(struct musb *musb, int is_on)
+{
+	u8		devctl;
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		musb->is_active = 1;
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		devctl |= MUSB_DEVCTL_SESSION;
+
+		MUSB_HST_MODE(musb);
+	} else {
+		musb->is_active = 0;
+
+		/* NOTE:  we're skipping A_WAIT_VFALL -> A_IDLE and
+		 * jumping right to B_IDLE...
+		 */
+
+		musb->xceiv.default_a = 0;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		devctl &= ~MUSB_DEVCTL_SESSION;
+
+		MUSB_DEV_MODE(musb);
+	}
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	DBG(1, "VBUS %s, devctl %02x "
+		/* otg %3x conf %08x prcm %08x */ "\n",
+		otg_state_string(musb),
+		musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+static int omap_set_power(struct otg_transceiver *x, unsigned mA)
+{
+	return 0;
+}
+
+static int musb_platform_resume(struct musb *musb);
+
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	devctl |= MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	switch (musb_mode) {
+	case MUSB_HOST:
+		otg_set_host(&musb->xceiv, musb->xceiv.host);
+		break;
+	case MUSB_PERIPHERAL:
+		otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
+		break;
+	case MUSB_OTG:
+		break;
+	}
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	u32 l;
+
+#if defined(CONFIG_ARCH_OMAP2430)
+	omap_cfg_reg(AE5_2430_USB0HS_STP);
+#endif
+
+	musb_platform_resume(musb);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	l &= ~NOSTDBY;		/* remove possible nostdby */
+	l |= SMARTSTDBY;	/* enable smart standby */
+	l &= ~AUTOIDLE;		/* disable auto idle */
+	l &= ~NOIDLE;		/* remove possible noidle */
+	l |= SMARTIDLE;		/* enable smart idle */
+	l |= AUTOIDLE;		/* enable auto idle */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	l = omap_readl(OTG_INTERFSEL);
+	l |= ULPI_12PIN;
+	omap_writel(l, OTG_INTERFSEL);
+
+	pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
+			"sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
+			omap_readl(OTG_REVISION), omap_readl(OTG_SYSCONFIG),
+			omap_readl(OTG_SYSSTATUS), omap_readl(OTG_INTERFSEL),
+			omap_readl(OTG_SIMENABLE));
+
+	omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
+
+	if (is_host_enabled(musb))
+		musb->board_set_vbus = omap_set_vbus;
+	if (is_peripheral_enabled(musb))
+		musb->xceiv.set_power = omap_set_power;
+	musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
+
+	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+	return 0;
+}
+
+int musb_platform_suspend(struct musb *musb)
+{
+	u32 l;
+
+	if (!musb->clock)
+		return 0;
+
+	/* in any role */
+	l = omap_readl(OTG_FORCESTDBY);
+	l |= ENABLEFORCE;	/* enable MSTANDBY */
+	omap_writel(l, OTG_FORCESTDBY);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l |= ENABLEWAKEUP;	/* enable wakeup */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	if (musb->xceiv.set_suspend)
+		musb->xceiv.set_suspend(&musb->xceiv, 1);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 0);
+	else
+		clk_disable(musb->clock);
+
+	return 0;
+}
+
+static int musb_platform_resume(struct musb *musb)
+{
+	u32 l;
+
+	if (!musb->clock)
+		return 0;
+
+	if (musb->xceiv.set_suspend)
+		musb->xceiv.set_suspend(&musb->xceiv, 0);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 1);
+	else
+		clk_enable(musb->clock);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	l = omap_readl(OTG_FORCESTDBY);
+	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
+	omap_writel(l, OTG_FORCESTDBY);
+
+	return 0;
+}
+
+
+int musb_platform_exit(struct musb *musb)
+{
+
+	omap_vbus_power(musb, 0 /*off*/, 1);
+
+	musb_platform_suspend(musb);
+
+	clk_put(musb->clock);
+	musb->clock = 0;
+
+	return 0;
+}
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
new file mode 100644
index 00000000000..786a62071f7
--- /dev/null
+++ b/drivers/usb/musb/omap2430.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_OMAP243X_H__
+#define __MUSB_OMAP243X_H__
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include <asm/arch/hardware.h>
+#include <asm/arch/usb.h>
+
+/*
+ * OMAP2430-specific definitions
+ */
+
+#define MENTOR_BASE_OFFSET	0
+#if	defined(CONFIG_ARCH_OMAP2430)
+#define	OMAP_HSOTG_BASE		(OMAP243X_HS_BASE)
+#elif	defined(CONFIG_ARCH_OMAP3430)
+#define	OMAP_HSOTG_BASE		(OMAP34XX_HSUSB_OTG_BASE)
+#endif
+#define OMAP_HSOTG(offset)	(OMAP_HSOTG_BASE + 0x400 + (offset))
+#define OTG_REVISION		OMAP_HSOTG(0x0)
+#define OTG_SYSCONFIG		OMAP_HSOTG(0x4)
+#	define	MIDLEMODE	12	/* bit position */
+#	define	FORCESTDBY		(0 << MIDLEMODE)
+#	define	NOSTDBY			(1 << MIDLEMODE)
+#	define	SMARTSTDBY		(2 << MIDLEMODE)
+#	define	SIDLEMODE		3	/* bit position */
+#	define	FORCEIDLE		(0 << SIDLEMODE)
+#	define	NOIDLE			(1 << SIDLEMODE)
+#	define	SMARTIDLE		(2 << SIDLEMODE)
+#	define	ENABLEWAKEUP		(1 << 2)
+#	define	SOFTRST			(1 << 1)
+#	define	AUTOIDLE		(1 << 0)
+#define OTG_SYSSTATUS		OMAP_HSOTG(0x8)
+#	define	RESETDONE		(1 << 0)
+#define OTG_INTERFSEL		OMAP_HSOTG(0xc)
+#	define	EXTCP			(1 << 2)
+#	define	PHYSEL		0	/* bit position */
+#	define	UTMI_8BIT		(0 << PHYSEL)
+#	define	ULPI_12PIN		(1 << PHYSEL)
+#	define	ULPI_8PIN		(2 << PHYSEL)
+#define OTG_SIMENABLE		OMAP_HSOTG(0x10)
+#	define	TM1			(1 << 0)
+#define OTG_FORCESTDBY		OMAP_HSOTG(0x14)
+#	define	ENABLEFORCE		(1 << 0)
+
+#endif	/* CONFIG_ARCH_OMAP2430 */
+
+#endif	/* __MUSB_OMAP243X_H__ */
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
new file mode 100644
index 00000000000..b73b036f3d7
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.c
@@ -0,0 +1,1151 @@
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Notes:
+ * - Driver assumes that interface to external host (main CPU) is
+ *   configured for NOR FLASH interface instead of VLYNQ serial
+ *   interface.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include "musb_core.h"
+
+static void tusb_source_power(struct musb *musb, int is_on);
+
+#define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
+#define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
+
+/*
+ * Checks the revision. We need to use the DMA register as 3.0 does not
+ * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
+ */
+u8 tusb_get_revision(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		die_id;
+	u8		rev;
+
+	rev = musb_readl(tbase, TUSB_DMA_CTRL_REV) & 0xff;
+	if (TUSB_REV_MAJOR(rev) == 3) {
+		die_id = TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase,
+				TUSB_DIDR1_HI));
+		if (die_id >= TUSB_DIDR1_HI_REV_31)
+			rev |= 1;
+	}
+
+	return rev;
+}
+
+static int __init tusb_print_revision(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u8		rev;
+
+	rev = tusb_get_revision(musb);
+
+	pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n",
+		"prcm",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_PRCM_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_PRCM_REV)),
+		"int",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+		"gpio",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_GPIO_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_GPIO_REV)),
+		"dma",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+		"dieid",
+		TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)),
+		"rev",
+		TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev));
+
+	return tusb_get_revision(musb);
+}
+
+#define WBUS_QUIRK_MASK	(TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \
+				| TUSB_PHY_OTG_CTRL_TESTM0)
+
+/*
+ * Workaround for spontaneous WBUS wake-up issue #2 for tusb3.0.
+ * Disables power detection in PHY for the duration of idle.
+ */
+static void tusb_wbus_quirk(struct musb *musb, int enabled)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	static u32	phy_otg_ctrl, phy_otg_ena;
+	u32		tmp;
+
+	if (enabled) {
+		phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+		phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT
+				| phy_otg_ena | WBUS_QUIRK_MASK;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+		tmp = phy_otg_ena & ~WBUS_QUIRK_MASK;
+		tmp |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_TESTM2;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+		DBG(2, "Enabled tusb wbus quirk ctrl %08x ena %08x\n",
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+	} else if (musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE)
+					& TUSB_PHY_OTG_CTRL_TESTM2) {
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+		DBG(2, "Disabled tusb wbus quirk ctrl %08x ena %08x\n",
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+		phy_otg_ctrl = 0;
+		phy_otg_ena = 0;
+	}
+}
+
+/*
+ * TUSB 6010 may use a parallel bus that doesn't support byte ops;
+ * so both loading and unloading FIFOs need explicit byte counts.
+ */
+
+static inline void
+tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len)
+{
+	u32		val;
+	int		i;
+
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			memcpy(&val, buf, 4);
+			musb_writel(fifo, 0, val);
+			buf += 4;
+		}
+		len %= 4;
+	}
+	if (len > 0) {
+		/* Write the rest 1 - 3 bytes to FIFO */
+		memcpy(&val, buf, len);
+		musb_writel(fifo, 0, val);
+	}
+}
+
+static inline void tusb_fifo_read_unaligned(void __iomem *fifo,
+						void __iomem *buf, u16 len)
+{
+	u32		val;
+	int		i;
+
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			val = musb_readl(fifo, 0);
+			memcpy(buf, &val, 4);
+			buf += 4;
+		}
+		len %= 4;
+	}
+	if (len > 0) {
+		/* Read the rest 1 - 3 bytes from FIFO */
+		val = musb_readl(fifo, 0);
+		memcpy(buf, &val, len);
+	}
+}
+
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
+{
+	void __iomem	*ep_conf = hw_ep->conf;
+	void __iomem	*fifo = hw_ep->fifo;
+	u8		epnum = hw_ep->epnum;
+
+	prefetch(buf);
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', epnum, fifo, len, buf);
+
+	if (epnum)
+		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(len));
+	else
+		musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_DIR_TX |
+			TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+	if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+		/* Best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) buf) == 0) {
+			if (len >= 4) {
+				writesl(fifo, buf, len >> 2);
+				buf += (len & ~0x03);
+				len &= 0x03;
+			}
+		} else {
+			if (len >= 2) {
+				u32 val;
+				int i;
+
+				/* Cannot use writesw, fifo is 32-bit */
+				for (i = 0; i < (len >> 2); i++) {
+					val = (u32)(*(u16 *)buf);
+					buf += 2;
+					val |= (*(u16 *)buf) << 16;
+					buf += 2;
+					musb_writel(fifo, 0, val);
+				}
+				len &= 0x03;
+			}
+		}
+	}
+
+	if (len > 0)
+		tusb_fifo_write_unaligned(fifo, buf, len);
+}
+
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
+{
+	void __iomem	*ep_conf = hw_ep->conf;
+	void __iomem	*fifo = hw_ep->fifo;
+	u8		epnum = hw_ep->epnum;
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', epnum, fifo, len, buf);
+
+	if (epnum)
+		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(len));
+	else
+		musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+	if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+		/* Best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) buf) == 0) {
+			if (len >= 4) {
+				readsl(fifo, buf, len >> 2);
+				buf += (len & ~0x03);
+				len &= 0x03;
+			}
+		} else {
+			if (len >= 2) {
+				u32 val;
+				int i;
+
+				/* Cannot use readsw, fifo is 32-bit */
+				for (i = 0; i < (len >> 2); i++) {
+					val = musb_readl(fifo, 0);
+					*(u16 *)buf = (u16)(val & 0xffff);
+					buf += 2;
+					*(u16 *)buf = (u16)(val >> 16);
+					buf += 2;
+				}
+				len &= 0x03;
+			}
+		}
+	}
+
+	if (len > 0)
+		tusb_fifo_read_unaligned(fifo, buf, len);
+}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+/* This is used by gadget drivers, and OTG transceiver logic, allowing
+ * at most mA current to be drawn from VBUS during a Default-B session
+ * (that is, while VBUS exceeds 4.4V).  In Default-A (including pure host
+ * mode), or low power Default-B sessions, something else supplies power.
+ * Caller must take care of locking.
+ */
+static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
+{
+	struct musb	*musb = container_of(x, struct musb, xceiv);
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	/*
+	 * Keep clock active when enabled. Note that this is not tied to
+	 * drawing VBUS, as with OTG mA can be less than musb->min_power.
+	 */
+	if (musb->set_clock) {
+		if (mA)
+			musb->set_clock(musb->clock, 1);
+		else
+			musb->set_clock(musb->clock, 0);
+	}
+
+	/* tps65030 seems to consume max 100mA, with maybe 60mA available
+	 * (measured on one board) for things other than tps and tusb.
+	 *
+	 * Boards sharing the CPU clock with CLKIN will need to prevent
+	 * certain idle sleep states while the USB link is active.
+	 *
+	 * REVISIT we could use VBUS to supply only _one_ of { 1.5V, 3.3V }.
+	 * The actual current usage would be very board-specific.  For now,
+	 * it's simpler to just use an aggregate (also board-specific).
+	 */
+	if (x->default_a || mA < (musb->min_power << 1))
+		mA = 0;
+
+	reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	if (mA) {
+		musb->is_bus_powered = 1;
+		reg |= TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN;
+	} else {
+		musb->is_bus_powered = 0;
+		reg &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+	}
+	musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+	DBG(2, "draw max %d mA VBUS\n", mA);
+	return 0;
+}
+
+#else
+#define tusb_draw_power	NULL
+#endif
+
+/* workaround for issue 13:  change clock during chip idle
+ * (to be fixed in rev3 silicon) ... symptoms include disconnect
+ * or looping suspend/resume cycles
+ */
+static void tusb_set_clock_source(struct musb *musb, unsigned mode)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	reg = musb_readl(tbase, TUSB_PRCM_CONF);
+	reg &= ~TUSB_PRCM_CONF_SYS_CLKSEL(0x3);
+
+	/* 0 = refclk (clkin, XI)
+	 * 1 = PHY 60 MHz (internal PLL)
+	 * 2 = not supported
+	 * 3 = what?
+	 */
+	if (mode > 0)
+		reg |= TUSB_PRCM_CONF_SYS_CLKSEL(mode & 0x3);
+
+	musb_writel(tbase, TUSB_PRCM_CONF, reg);
+
+	/* FIXME tusb6010_platform_retime(mode == 0); */
+}
+
+/*
+ * Idle TUSB6010 until next wake-up event; NOR access always wakes.
+ * Other code ensures that we idle unless we're connected _and_ the
+ * USB link is not suspended ... and tells us the relevant wakeup
+ * events.  SW_EN for voltage is handled separately.
+ */
+void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	if ((wakeup_enables & TUSB_PRCM_WBUS)
+			&& (tusb_get_revision(musb) == TUSB_REV_30))
+		tusb_wbus_quirk(musb, 1);
+
+	tusb_set_clock_source(musb, 0);
+
+	wakeup_enables |= TUSB_PRCM_WNORCS;
+	musb_writel(tbase, TUSB_PRCM_WAKEUP_MASK, ~wakeup_enables);
+
+	/* REVISIT writeup of WID implies that if WID set and ID is grounded,
+	 * TUSB_PHY_OTG_CTRL.TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP must be cleared.
+	 * Presumably that's mostly to save power, hence WID is immaterial ...
+	 */
+
+	reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	/* issue 4: when driving vbus, use hipower (vbus_det) comparator */
+	if (is_host_active(musb)) {
+		reg |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+		reg &= ~TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+	} else {
+		reg |= TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+		reg &= ~TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+	}
+	reg |= TUSB_PRCM_MNGMT_PM_IDLE | TUSB_PRCM_MNGMT_DEV_IDLE;
+	musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+	DBG(6, "idle, wake on %02x\n", wakeup_enables);
+}
+
+/*
+ * Updates cable VBUS status. Caller must take care of locking.
+ */
+int musb_platform_get_vbus_status(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		otg_stat, prcm_mngmt;
+	int		ret = 0;
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	prcm_mngmt = musb_readl(tbase, TUSB_PRCM_MNGMT);
+
+	/* Temporarily enable VBUS detection if it was disabled for
+	 * suspend mode. Unless it's enabled otg_stat and devctl will
+	 * not show correct VBUS state.
+	 */
+	if (!(prcm_mngmt & TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN)) {
+		u32 tmp = prcm_mngmt;
+		tmp |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+		musb_writel(tbase, TUSB_PRCM_MNGMT, tmp);
+		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+		musb_writel(tbase, TUSB_PRCM_MNGMT, prcm_mngmt);
+	}
+
+	if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID)
+		ret = 1;
+
+	return ret;
+}
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+	struct musb	*musb = (void *)_musb;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_BCON:
+		if ((musb->a_wait_bcon != 0)
+			&& (musb->idle_timeout == 0
+				|| time_after(jiffies, musb->idle_timeout))) {
+			DBG(4, "Nothing connected %s, turning off VBUS\n",
+					otg_state_string(musb));
+		}
+		/* FALLTHROUGH */
+	case OTG_STATE_A_IDLE:
+		tusb_source_power(musb, 0);
+	default:
+		break;
+	}
+
+	if (!musb->is_active) {
+		u32	wakeups;
+
+		/* wait until khubd handles port change status */
+		if (is_host_active(musb) && (musb->port1_status >> 16))
+			goto done;
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		if (is_peripheral_enabled(musb) && !musb->gadget_driver)
+			wakeups = 0;
+		else {
+			wakeups = TUSB_PRCM_WHOSTDISCON
+					| TUSB_PRCM_WBUS
+					| TUSB_PRCM_WVBUS;
+			if (is_otg_enabled(musb))
+				wakeups |= TUSB_PRCM_WID;
+		}
+#else
+		wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS;
+#endif
+		tusb_allow_idle(musb, wakeups);
+	}
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+/*
+ * Maybe put TUSB6010 into idle mode mode depending on USB link status,
+ * like "disconnected" or "suspended".  We'll be woken out of it by
+ * connect, resume, or disconnect.
+ *
+ * Needs to be called as the last function everywhere where there is
+ * register access to TUSB6010 because of NOR flash wake-up.
+ * Caller should own controller spinlock.
+ *
+ * Delay because peripheral enables D+ pullup 3msec after SE0, and
+ * we don't want to treat that full speed J as a wakeup event.
+ * ... peripherals must draw only suspend current after 10 msec.
+ */
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
+	static unsigned long	last_timer;
+
+	if (timeout == 0)
+		timeout = default_timeout;
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || ((musb->a_wait_bcon == 0)
+			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+		del_timer(&musb_idle_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout)) {
+		if (!timer_pending(&musb_idle_timer))
+			last_timer = timeout;
+		else {
+			DBG(4, "Longer idle timer already pending, ignoring\n");
+			return;
+		}
+	}
+	last_timer = timeout;
+
+	DBG(4, "%s inactive, for idle timer for %lu ms\n",
+		otg_state_string(musb),
+		(unsigned long)jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb_idle_timer, timeout);
+}
+
+/* ticks of 60 MHz clock */
+#define DEVCLOCK		60000000
+#define OTG_TIMER_MS(msecs)	((msecs) \
+		? (TUSB_DEV_OTG_TIMER_VAL((DEVCLOCK/1000)*(msecs)) \
+				| TUSB_DEV_OTG_TIMER_ENABLE) \
+		: 0)
+
+static void tusb_source_power(struct musb *musb, int is_on)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		conf, prcm, timer;
+	u8		devctl;
+
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	prcm = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	conf = musb_readl(tbase, TUSB_DEV_CONF);
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		if (musb->set_clock)
+			musb->set_clock(musb->clock, 1);
+		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		devctl |= MUSB_DEVCTL_SESSION;
+
+		conf |= TUSB_DEV_CONF_USB_HOST_MODE;
+		MUSB_HST_MODE(musb);
+	} else {
+		u32	otg_stat;
+
+		timer = 0;
+
+		/* If ID pin is grounded, we want to be a_idle */
+		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+		if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_WAIT_VRISE:
+			case OTG_STATE_A_WAIT_BCON:
+				musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				musb->xceiv.state = OTG_STATE_A_IDLE;
+				break;
+			default:
+				musb->xceiv.state = OTG_STATE_A_IDLE;
+			}
+			musb->is_active = 0;
+			musb->xceiv.default_a = 1;
+			MUSB_HST_MODE(musb);
+		} else {
+			musb->is_active = 0;
+			musb->xceiv.default_a = 0;
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		}
+
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
+		if (musb->set_clock)
+			musb->set_clock(musb->clock, 0);
+	}
+	prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+
+	musb_writel(tbase, TUSB_PRCM_MNGMT, prcm);
+	musb_writel(tbase, TUSB_DEV_OTG_TIMER, timer);
+	musb_writel(tbase, TUSB_DEV_CONF, conf);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	DBG(1, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
+		otg_state_string(musb),
+		musb_readb(musb->mregs, MUSB_DEVCTL),
+		musb_readl(tbase, TUSB_DEV_OTG_STAT),
+		conf, prcm);
+}
+
+/*
+ * Sets the mode to OTG, peripheral or host by changing the ID detection.
+ * Caller must take care of locking.
+ *
+ * Note that if a mini-A cable is plugged in the ID line will stay down as
+ * the weak ID pull-up is not able to pull the ID up.
+ *
+ * REVISIT: It would be possible to add support for changing between host
+ * and peripheral modes in non-OTG configurations by reconfiguring hardware
+ * and then setting musb->board_mode. For now, only support OTG mode.
+ */
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
+
+	if (musb->board_mode != MUSB_OTG) {
+		ERR("Changing mode currently only supported in OTG mode\n");
+		return;
+	}
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+	phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+	dev_conf = musb_readl(tbase, TUSB_DEV_CONF);
+
+	switch (musb_mode) {
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case MUSB_HOST:		/* Disable PHY ID detect, ground ID */
+		phy_otg_ctrl &= ~TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf |= TUSB_DEV_CONF_ID_SEL;
+		dev_conf &= ~TUSB_DEV_CONF_SOFT_ID;
+		break;
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	case MUSB_PERIPHERAL:	/* Disable PHY ID detect, keep ID pull-up on */
+		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf |= (TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+		break;
+#endif
+
+#ifdef CONFIG_USB_MUSB_OTG
+	case MUSB_OTG:		/* Use PHY ID detection */
+		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf &= ~(TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+		break;
+#endif
+
+	default:
+		DBG(2, "Trying to set unknown mode %i\n", musb_mode);
+	}
+
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL,
+			TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl);
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE,
+			TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena);
+	musb_writel(tbase, TUSB_DEV_CONF, dev_conf);
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	if ((musb_mode == MUSB_PERIPHERAL) &&
+		!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS))
+			INFO("Cannot be peripheral with mini-A cable "
+			"otg_stat: %08x\n", otg_stat);
+}
+
+static inline unsigned long
+tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
+{
+	u32		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	unsigned long	idle_timeout = 0;
+
+	/* ID pin */
+	if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
+		int	default_a;
+
+		if (is_otg_enabled(musb))
+			default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS);
+		else
+			default_a = is_host_enabled(musb);
+		DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
+		musb->xceiv.default_a = default_a;
+		tusb_source_power(musb, default_a);
+
+		/* Don't allow idling immediately */
+		if (default_a)
+			idle_timeout = jiffies + (HZ * 3);
+	}
+
+	/* VBUS state change */
+	if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
+
+		/* B-dev state machine:  no vbus ~= disconnect */
+		if ((is_otg_enabled(musb) && !musb->xceiv.default_a)
+				|| !is_host_enabled(musb)) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			/* ? musb_root_disconnect(musb); */
+			musb->port1_status &=
+				~(USB_PORT_STAT_CONNECTION
+				| USB_PORT_STAT_ENABLE
+				| USB_PORT_STAT_LOW_SPEED
+				| USB_PORT_STAT_HIGH_SPEED
+				| USB_PORT_STAT_TEST
+				);
+#endif
+
+			if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
+				DBG(1, "Forcing disconnect (no interrupt)\n");
+				if (musb->xceiv.state != OTG_STATE_B_IDLE) {
+					/* INTR_DISCONNECT can hide... */
+					musb->xceiv.state = OTG_STATE_B_IDLE;
+					musb->int_usb |= MUSB_INTR_DISCONNECT;
+				}
+				musb->is_active = 0;
+			}
+			DBG(2, "vbus change, %s, otg %03x\n",
+				otg_state_string(musb), otg_stat);
+			idle_timeout = jiffies + (1 * HZ);
+			schedule_work(&musb->irq_work);
+
+		} else /* A-dev state machine */ {
+			DBG(2, "vbus change, %s, otg %03x\n",
+				otg_state_string(musb), otg_stat);
+
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_IDLE:
+				DBG(2, "Got SRP, turning on VBUS\n");
+				musb_set_vbus(musb, 1);
+
+				/* CONNECT can wake if a_wait_bcon is set */
+				if (musb->a_wait_bcon != 0)
+					musb->is_active = 0;
+				else
+					musb->is_active = 1;
+
+				/*
+				 * OPT FS A TD.4.6 needs few seconds for
+				 * A_WAIT_VRISE
+				 */
+				idle_timeout = jiffies + (2 * HZ);
+
+				break;
+			case OTG_STATE_A_WAIT_VRISE:
+				/* ignore; A-session-valid < VBUS_VALID/2,
+				 * we monitor this with the timer
+				 */
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				/* REVISIT this irq triggers during short
+				 * spikes caused by enumeration ...
+				 */
+				if (musb->vbuserr_retry) {
+					musb->vbuserr_retry--;
+					tusb_source_power(musb, 1);
+				} else {
+					musb->vbuserr_retry
+						= VBUSERR_RETRY_COUNT;
+					tusb_source_power(musb, 0);
+				}
+				break;
+			default:
+				break;
+			}
+		}
+	}
+
+	/* OTG timer expiration */
+	if (int_src & TUSB_INT_SRC_OTG_TIMEOUT) {
+		u8	devctl;
+
+		DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
+
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_WAIT_VRISE:
+			/* VBUS has probably been valid for a while now,
+			 * but may well have bounced out of range a bit
+			 */
+			devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+			if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID) {
+				if ((devctl & MUSB_DEVCTL_VBUS)
+						!= MUSB_DEVCTL_VBUS) {
+					DBG(2, "devctl %02x\n", devctl);
+					break;
+				}
+				musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+				musb->is_active = 0;
+				idle_timeout = jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon);
+			} else {
+				/* REVISIT report overcurrent to hub? */
+				ERR("vbus too slow, devctl %02x\n", devctl);
+				tusb_source_power(musb, 0);
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				idle_timeout = jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon);
+			break;
+		case OTG_STATE_A_SUSPEND:
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			break;
+		default:
+			break;
+		}
+	}
+	schedule_work(&musb->irq_work);
+
+	return idle_timeout;
+}
+
+static irqreturn_t tusb_interrupt(int irq, void *__hci)
+{
+	struct musb	*musb = __hci;
+	void __iomem	*tbase = musb->ctrl_base;
+	unsigned long	flags, idle_timeout = 0;
+	u32		int_mask, int_src;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Mask all interrupts to allow using both edge and level GPIO irq */
+	int_mask = musb_readl(tbase, TUSB_INT_MASK);
+	musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+
+	int_src = musb_readl(tbase, TUSB_INT_SRC) & ~TUSB_INT_SRC_RESERVED_BITS;
+	DBG(3, "TUSB IRQ %08x\n", int_src);
+
+	musb->int_usb = (u8) int_src;
+
+	/* Acknowledge wake-up source interrupts */
+	if (int_src & TUSB_INT_SRC_DEV_WAKEUP) {
+		u32	reg;
+		u32	i;
+
+		if (tusb_get_revision(musb) == TUSB_REV_30)
+			tusb_wbus_quirk(musb, 0);
+
+		/* there are issues re-locking the PLL on wakeup ... */
+
+		/* work around issue 8 */
+		for (i = 0xf7f7f7; i > 0xf7f7f7 - 1000; i--) {
+			musb_writel(tbase, TUSB_SCRATCH_PAD, 0);
+			musb_writel(tbase, TUSB_SCRATCH_PAD, i);
+			reg = musb_readl(tbase, TUSB_SCRATCH_PAD);
+			if (reg == i)
+				break;
+			DBG(6, "TUSB NOR not ready\n");
+		}
+
+		/* work around issue 13 (2nd half) */
+		tusb_set_clock_source(musb, 1);
+
+		reg = musb_readl(tbase, TUSB_PRCM_WAKEUP_SOURCE);
+		musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
+		if (reg & ~TUSB_PRCM_WNORCS) {
+			musb->is_active = 1;
+			schedule_work(&musb->irq_work);
+		}
+		DBG(3, "wake %sactive %02x\n",
+				musb->is_active ? "" : "in", reg);
+
+		/* REVISIT host side TUSB_PRCM_WHOSTDISCON, TUSB_PRCM_WBUS */
+	}
+
+	if (int_src & TUSB_INT_SRC_USB_IP_CONN)
+		del_timer(&musb_idle_timer);
+
+	/* OTG state change reports (annoyingly) not issued by Mentor core */
+	if (int_src & (TUSB_INT_SRC_VBUS_SENSE_CHNG
+				| TUSB_INT_SRC_OTG_TIMEOUT
+				| TUSB_INT_SRC_ID_STATUS_CHNG))
+		idle_timeout = tusb_otg_ints(musb, int_src, tbase);
+
+	/* TX dma callback must be handled here, RX dma callback is
+	 * handled in tusb_omap_dma_cb.
+	 */
+	if ((int_src & TUSB_INT_SRC_TXRX_DMA_DONE)) {
+		u32	dma_src = musb_readl(tbase, TUSB_DMA_INT_SRC);
+		u32	real_dma_src = musb_readl(tbase, TUSB_DMA_INT_MASK);
+
+		DBG(3, "DMA IRQ %08x\n", dma_src);
+		real_dma_src = ~real_dma_src & dma_src;
+		if (tusb_dma_omap() && real_dma_src) {
+			int	tx_source = (real_dma_src & 0xffff);
+			int	i;
+
+			for (i = 1; i <= 15; i++) {
+				if (tx_source & (1 << i)) {
+					DBG(3, "completing ep%i %s\n", i, "tx");
+					musb_dma_completion(musb, i, 1);
+				}
+			}
+		}
+		musb_writel(tbase, TUSB_DMA_INT_CLEAR, dma_src);
+	}
+
+	/* EP interrupts. In OCP mode tusb6010 mirrors the MUSB interrupts */
+	if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX)) {
+		u32	musb_src = musb_readl(tbase, TUSB_USBIP_INT_SRC);
+
+		musb_writel(tbase, TUSB_USBIP_INT_CLEAR, musb_src);
+		musb->int_rx = (((musb_src >> 16) & 0xffff) << 1);
+		musb->int_tx = (musb_src & 0xffff);
+	} else {
+		musb->int_rx = 0;
+		musb->int_tx = 0;
+	}
+
+	if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX | 0xff))
+		musb_interrupt(musb);
+
+	/* Acknowledge TUSB interrupts. Clear only non-reserved bits */
+	musb_writel(tbase, TUSB_INT_SRC_CLEAR,
+		int_src & ~TUSB_INT_MASK_RESERVED_BITS);
+
+	musb_platform_try_idle(musb, idle_timeout);
+
+	musb_writel(tbase, TUSB_INT_MASK, int_mask);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int dma_off;
+
+/*
+ * Enables TUSB6010. Caller must take care of locking.
+ * REVISIT:
+ * - Check what is unnecessary in MGC_HdrcStart()
+ */
+void musb_platform_enable(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/* Setup TUSB6010 main interrupt mask. Enable all interrupts except SOF.
+	 * REVISIT: Enable and deal with TUSB_INT_SRC_USB_IP_SOF */
+	musb_writel(tbase, TUSB_INT_MASK, TUSB_INT_SRC_USB_IP_SOF);
+
+	/* Setup TUSB interrupt, disable DMA and GPIO interrupts */
+	musb_writel(tbase, TUSB_USBIP_INT_MASK, 0);
+	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+	/* Clear all subsystem interrups */
+	musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff);
+	musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff);
+
+	/* Acknowledge pending interrupt(s) */
+	musb_writel(tbase, TUSB_INT_SRC_CLEAR, ~TUSB_INT_MASK_RESERVED_BITS);
+
+	/* Only 0 clock cycles for minimum interrupt de-assertion time and
+	 * interrupt polarity active low seems to work reliably here */
+	musb_writel(tbase, TUSB_INT_CTRL_CONF,
+			TUSB_INT_CTRL_CONF_INT_RELCYC(0));
+
+	set_irq_type(musb->nIrq, IRQ_TYPE_LEVEL_LOW);
+
+	/* maybe force into the Default-A OTG state machine */
+	if (!(musb_readl(tbase, TUSB_DEV_OTG_STAT)
+			& TUSB_DEV_OTG_STAT_ID_STATUS))
+		musb_writel(tbase, TUSB_INT_SRC_SET,
+				TUSB_INT_SRC_ID_STATUS_CHNG);
+
+	if (is_dma_capable() && dma_off)
+		printk(KERN_WARNING "%s %s: dma not reactivated\n",
+				__FILE__, __func__);
+	else
+		dma_off = 1;
+}
+
+/*
+ * Disables TUSB6010. Caller must take care of locking.
+ */
+void musb_platform_disable(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/* FIXME stop DMA, IRQs, timers, ... */
+
+	/* disable all IRQs */
+	musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+	musb_writel(tbase, TUSB_USBIP_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+	del_timer(&musb_idle_timer);
+
+	if (is_dma_capable() && !dma_off) {
+		printk(KERN_WARNING "%s %s: dma still active\n",
+				__FILE__, __func__);
+		dma_off = 1;
+	}
+}
+
+/*
+ * Sets up TUSB6010 CPU interface specific signals and registers
+ * Note: Settings optimized for OMAP24xx
+ */
+static void __init tusb_setup_cpu_interface(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/*
+	 * Disable GPIO[5:0] pullups (used as output DMA requests)
+	 * Don't disable GPIO[7:6] as they are needed for wake-up.
+	 */
+	musb_writel(tbase, TUSB_PULLUP_1_CTRL, 0x0000003F);
+
+	/* Disable all pullups on NOR IF, DMAREQ0 and DMAREQ1 */
+	musb_writel(tbase, TUSB_PULLUP_2_CTRL, 0x01FFFFFF);
+
+	/* Turn GPIO[5:0] to DMAREQ[5:0] signals */
+	musb_writel(tbase, TUSB_GPIO_CONF, TUSB_GPIO_CONF_DMAREQ(0x3f));
+
+	/* Burst size 16x16 bits, all six DMA requests enabled, DMA request
+	 * de-assertion time 2 system clocks p 62 */
+	musb_writel(tbase, TUSB_DMA_REQ_CONF,
+		TUSB_DMA_REQ_CONF_BURST_SIZE(2) |
+		TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f) |
+		TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+	/* Set 0 wait count for synchronous burst access */
+	musb_writel(tbase, TUSB_WAIT_COUNT, 1);
+}
+
+static int __init tusb_start(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	int		ret = 0;
+	unsigned long	flags;
+	u32		reg;
+
+	if (musb->board_set_power)
+		ret = musb->board_set_power(1);
+	if (ret != 0) {
+		printk(KERN_ERR "tusb: Cannot enable TUSB6010\n");
+		return ret;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_readl(tbase, TUSB_PROD_TEST_RESET) !=
+		TUSB_PROD_TEST_RESET_VAL) {
+		printk(KERN_ERR "tusb: Unable to detect TUSB6010\n");
+		goto err;
+	}
+
+	ret = tusb_print_revision(musb);
+	if (ret < 2) {
+		printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
+				ret);
+		goto err;
+	}
+
+	/* The uint bit for "USB non-PDR interrupt enable" has to be 1 when
+	 * NOR FLASH interface is used */
+	musb_writel(tbase, TUSB_VLYNQ_CTRL, 8);
+
+	/* Select PHY free running 60MHz as a system clock */
+	tusb_set_clock_source(musb, 1);
+
+	/* VBus valid timer 1us, disable DFT/Debug and VLYNQ clocks for
+	 * power saving, enable VBus detect and session end comparators,
+	 * enable IDpullup, enable VBus charging */
+	musb_writel(tbase, TUSB_PRCM_MNGMT,
+		TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(0xa) |
+		TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN |
+		TUSB_PRCM_MNGMT_OTG_SESS_END_EN |
+		TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN |
+		TUSB_PRCM_MNGMT_OTG_ID_PULLUP);
+	tusb_setup_cpu_interface(musb);
+
+	/* simplify:  always sense/pullup ID pins, as if in OTG mode */
+	reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+	reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, reg);
+
+	reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+	reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL, reg);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return 0;
+
+err:
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (musb->board_set_power)
+		musb->board_set_power(0);
+
+	return -ENODEV;
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	struct platform_device	*pdev;
+	struct resource		*mem;
+	void __iomem		*sync;
+	int			ret;
+
+	pdev = to_platform_device(musb->controller);
+
+	/* dma address for async dma */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	musb->async = mem->start;
+
+	/* dma address for sync dma */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!mem) {
+		pr_debug("no sync dma resource?\n");
+		return -ENODEV;
+	}
+	musb->sync = mem->start;
+
+	sync = ioremap(mem->start, mem->end - mem->start + 1);
+	if (!sync) {
+		pr_debug("ioremap for sync failed\n");
+		return -ENOMEM;
+	}
+	musb->sync_va = sync;
+
+	/* Offsets from base: VLYNQ at 0x000, MUSB regs at 0x400,
+	 * FIFOs at 0x600, TUSB at 0x800
+	 */
+	musb->mregs += TUSB_BASE_OFFSET;
+
+	ret = tusb_start(musb);
+	if (ret) {
+		printk(KERN_ERR "Could not start tusb6010 (%d)\n",
+				ret);
+		return -ENODEV;
+	}
+	musb->isr = tusb_interrupt;
+
+	if (is_host_enabled(musb))
+		musb->board_set_vbus = tusb_source_power;
+	if (is_peripheral_enabled(musb))
+		musb->xceiv.set_power = tusb_draw_power;
+
+	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+	return ret;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+	del_timer_sync(&musb_idle_timer);
+
+	if (musb->board_set_power)
+		musb->board_set_power(0);
+
+	iounmap(musb->sync_va);
+
+	return 0;
+}
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
new file mode 100644
index 00000000000..ab8c96286ce
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.h
@@ -0,0 +1,233 @@
+/*
+ * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TUSB6010_H__
+#define __TUSB6010_H__
+
+extern u8 tusb_get_revision(struct musb *musb);
+
+#ifdef CONFIG_USB_TUSB6010
+#define musb_in_tusb()			1
+#else
+#define musb_in_tusb()			0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()			1
+#else
+#define tusb_dma_omap()			0
+#endif
+
+/* VLYNQ control register. 32-bit at offset 0x000 */
+#define TUSB_VLYNQ_CTRL			0x004
+
+/* Mentor Graphics OTG core registers. 8,- 16- and 32-bit at offset 0x400 */
+#define TUSB_BASE_OFFSET		0x400
+
+/* FIFO registers 32-bit at offset 0x600 */
+#define TUSB_FIFO_BASE			0x600
+
+/* Device System & Control registers. 32-bit at offset 0x800 */
+#define TUSB_SYS_REG_BASE		0x800
+
+#define TUSB_DEV_CONF			(TUSB_SYS_REG_BASE + 0x000)
+#define		TUSB_DEV_CONF_USB_HOST_MODE		(1 << 16)
+#define		TUSB_DEV_CONF_PROD_TEST_MODE		(1 << 15)
+#define		TUSB_DEV_CONF_SOFT_ID			(1 << 1)
+#define		TUSB_DEV_CONF_ID_SEL			(1 << 0)
+
+#define TUSB_PHY_OTG_CTRL_ENABLE	(TUSB_SYS_REG_BASE + 0x004)
+#define TUSB_PHY_OTG_CTRL		(TUSB_SYS_REG_BASE + 0x008)
+#define		TUSB_PHY_OTG_CTRL_WRPROTECT		(0xa5 << 24)
+#define		TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP		(1 << 23)
+#define		TUSB_PHY_OTG_CTRL_OTG_VBUS_DET_EN	(1 << 19)
+#define		TUSB_PHY_OTG_CTRL_OTG_SESS_END_EN	(1 << 18)
+#define		TUSB_PHY_OTG_CTRL_TESTM2		(1 << 17)
+#define		TUSB_PHY_OTG_CTRL_TESTM1		(1 << 16)
+#define		TUSB_PHY_OTG_CTRL_TESTM0		(1 << 15)
+#define		TUSB_PHY_OTG_CTRL_TX_DATA2		(1 << 14)
+#define		TUSB_PHY_OTG_CTRL_TX_GZ2		(1 << 13)
+#define		TUSB_PHY_OTG_CTRL_TX_ENABLE2		(1 << 12)
+#define		TUSB_PHY_OTG_CTRL_DM_PULLDOWN		(1 << 11)
+#define		TUSB_PHY_OTG_CTRL_DP_PULLDOWN		(1 << 10)
+#define		TUSB_PHY_OTG_CTRL_OSC_EN		(1 << 9)
+#define		TUSB_PHY_OTG_CTRL_PHYREF_CLKSEL(v)	(((v) & 3) << 7)
+#define		TUSB_PHY_OTG_CTRL_PD			(1 << 6)
+#define		TUSB_PHY_OTG_CTRL_PLL_ON		(1 << 5)
+#define		TUSB_PHY_OTG_CTRL_EXT_RPU		(1 << 4)
+#define		TUSB_PHY_OTG_CTRL_PWR_GOOD		(1 << 3)
+#define		TUSB_PHY_OTG_CTRL_RESET			(1 << 2)
+#define		TUSB_PHY_OTG_CTRL_SUSPENDM		(1 << 1)
+#define		TUSB_PHY_OTG_CTRL_CLK_MODE		(1 << 0)
+
+/*OTG status register */
+#define TUSB_DEV_OTG_STAT		(TUSB_SYS_REG_BASE + 0x00c)
+#define		TUSB_DEV_OTG_STAT_PWR_CLK_GOOD		(1 << 8)
+#define		TUSB_DEV_OTG_STAT_SESS_END		(1 << 7)
+#define		TUSB_DEV_OTG_STAT_SESS_VALID		(1 << 6)
+#define		TUSB_DEV_OTG_STAT_VBUS_VALID		(1 << 5)
+#define		TUSB_DEV_OTG_STAT_VBUS_SENSE		(1 << 4)
+#define		TUSB_DEV_OTG_STAT_ID_STATUS		(1 << 3)
+#define		TUSB_DEV_OTG_STAT_HOST_DISCON		(1 << 2)
+#define		TUSB_DEV_OTG_STAT_LINE_STATE		(3 << 0)
+#define		TUSB_DEV_OTG_STAT_DP_ENABLE		(1 << 1)
+#define		TUSB_DEV_OTG_STAT_DM_ENABLE		(1 << 0)
+
+#define TUSB_DEV_OTG_TIMER		(TUSB_SYS_REG_BASE + 0x010)
+#	define TUSB_DEV_OTG_TIMER_ENABLE		(1 << 31)
+#	define TUSB_DEV_OTG_TIMER_VAL(v)		((v) & 0x07ffffff)
+#define TUSB_PRCM_REV			(TUSB_SYS_REG_BASE + 0x014)
+
+/* PRCM configuration register */
+#define TUSB_PRCM_CONF			(TUSB_SYS_REG_BASE + 0x018)
+#define		TUSB_PRCM_CONF_SFW_CPEN		(1 << 24)
+#define		TUSB_PRCM_CONF_SYS_CLKSEL(v)	(((v) & 3) << 16)
+
+/* PRCM management register */
+#define TUSB_PRCM_MNGMT			(TUSB_SYS_REG_BASE + 0x01c)
+#define		TUSB_PRCM_MNGMT_SRP_FIX_TIMER(v)	(((v) & 0xf) << 25)
+#define		TUSB_PRCM_MNGMT_SRP_FIX_EN		(1 << 24)
+#define		TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(v)	(((v) & 0xf) << 20)
+#define		TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN	(1 << 19)
+#define		TUSB_PRCM_MNGMT_DFT_CLK_DIS		(1 << 18)
+#define		TUSB_PRCM_MNGMT_VLYNQ_CLK_DIS		(1 << 17)
+#define		TUSB_PRCM_MNGMT_OTG_SESS_END_EN		(1 << 10)
+#define		TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN		(1 << 9)
+#define		TUSB_PRCM_MNGMT_OTG_ID_PULLUP		(1 << 8)
+#define		TUSB_PRCM_MNGMT_15_SW_EN		(1 << 4)
+#define		TUSB_PRCM_MNGMT_33_SW_EN		(1 << 3)
+#define		TUSB_PRCM_MNGMT_5V_CPEN			(1 << 2)
+#define		TUSB_PRCM_MNGMT_PM_IDLE			(1 << 1)
+#define		TUSB_PRCM_MNGMT_DEV_IDLE		(1 << 0)
+
+/* Wake-up source clear and mask registers */
+#define TUSB_PRCM_WAKEUP_SOURCE		(TUSB_SYS_REG_BASE + 0x020)
+#define TUSB_PRCM_WAKEUP_CLEAR		(TUSB_SYS_REG_BASE + 0x028)
+#define TUSB_PRCM_WAKEUP_MASK		(TUSB_SYS_REG_BASE + 0x02c)
+#define		TUSB_PRCM_WAKEUP_RESERVED_BITS	(0xffffe << 13)
+#define		TUSB_PRCM_WGPIO_7	(1 << 12)
+#define		TUSB_PRCM_WGPIO_6	(1 << 11)
+#define		TUSB_PRCM_WGPIO_5	(1 << 10)
+#define		TUSB_PRCM_WGPIO_4	(1 << 9)
+#define		TUSB_PRCM_WGPIO_3	(1 << 8)
+#define		TUSB_PRCM_WGPIO_2	(1 << 7)
+#define		TUSB_PRCM_WGPIO_1	(1 << 6)
+#define		TUSB_PRCM_WGPIO_0	(1 << 5)
+#define		TUSB_PRCM_WHOSTDISCON	(1 << 4)	/* Host disconnect */
+#define		TUSB_PRCM_WBUS		(1 << 3)	/* USB bus resume */
+#define		TUSB_PRCM_WNORCS	(1 << 2)	/* NOR chip select */
+#define		TUSB_PRCM_WVBUS		(1 << 1)	/* OTG PHY VBUS */
+#define		TUSB_PRCM_WID		(1 << 0)	/* OTG PHY ID detect */
+
+#define TUSB_PULLUP_1_CTRL		(TUSB_SYS_REG_BASE + 0x030)
+#define TUSB_PULLUP_2_CTRL		(TUSB_SYS_REG_BASE + 0x034)
+#define TUSB_INT_CTRL_REV		(TUSB_SYS_REG_BASE + 0x038)
+#define TUSB_INT_CTRL_CONF		(TUSB_SYS_REG_BASE + 0x03c)
+#define TUSB_USBIP_INT_SRC		(TUSB_SYS_REG_BASE + 0x040)
+#define TUSB_USBIP_INT_SET		(TUSB_SYS_REG_BASE + 0x044)
+#define TUSB_USBIP_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x048)
+#define TUSB_USBIP_INT_MASK		(TUSB_SYS_REG_BASE + 0x04c)
+#define TUSB_DMA_INT_SRC		(TUSB_SYS_REG_BASE + 0x050)
+#define TUSB_DMA_INT_SET		(TUSB_SYS_REG_BASE + 0x054)
+#define TUSB_DMA_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x058)
+#define TUSB_DMA_INT_MASK		(TUSB_SYS_REG_BASE + 0x05c)
+#define TUSB_GPIO_INT_SRC		(TUSB_SYS_REG_BASE + 0x060)
+#define TUSB_GPIO_INT_SET		(TUSB_SYS_REG_BASE + 0x064)
+#define TUSB_GPIO_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x068)
+#define TUSB_GPIO_INT_MASK		(TUSB_SYS_REG_BASE + 0x06c)
+
+/* NOR flash interrupt source registers */
+#define TUSB_INT_SRC			(TUSB_SYS_REG_BASE + 0x070)
+#define TUSB_INT_SRC_SET		(TUSB_SYS_REG_BASE + 0x074)
+#define TUSB_INT_SRC_CLEAR		(TUSB_SYS_REG_BASE + 0x078)
+#define TUSB_INT_MASK			(TUSB_SYS_REG_BASE + 0x07c)
+#define		TUSB_INT_SRC_TXRX_DMA_DONE		(1 << 24)
+#define		TUSB_INT_SRC_USB_IP_CORE		(1 << 17)
+#define		TUSB_INT_SRC_OTG_TIMEOUT		(1 << 16)
+#define		TUSB_INT_SRC_VBUS_SENSE_CHNG		(1 << 15)
+#define		TUSB_INT_SRC_ID_STATUS_CHNG		(1 << 14)
+#define		TUSB_INT_SRC_DEV_WAKEUP			(1 << 13)
+#define		TUSB_INT_SRC_DEV_READY			(1 << 12)
+#define		TUSB_INT_SRC_USB_IP_TX			(1 << 9)
+#define		TUSB_INT_SRC_USB_IP_RX			(1 << 8)
+#define		TUSB_INT_SRC_USB_IP_VBUS_ERR		(1 << 7)
+#define		TUSB_INT_SRC_USB_IP_VBUS_REQ		(1 << 6)
+#define		TUSB_INT_SRC_USB_IP_DISCON		(1 << 5)
+#define		TUSB_INT_SRC_USB_IP_CONN		(1 << 4)
+#define		TUSB_INT_SRC_USB_IP_SOF			(1 << 3)
+#define		TUSB_INT_SRC_USB_IP_RST_BABBLE		(1 << 2)
+#define		TUSB_INT_SRC_USB_IP_RESUME		(1 << 1)
+#define		TUSB_INT_SRC_USB_IP_SUSPEND		(1 << 0)
+
+/* NOR flash interrupt registers reserved bits. Must be written as 0 */
+#define		TUSB_INT_MASK_RESERVED_17		(0x3fff << 17)
+#define		TUSB_INT_MASK_RESERVED_13		(1 << 13)
+#define		TUSB_INT_MASK_RESERVED_8		(0xf << 8)
+#define		TUSB_INT_SRC_RESERVED_26		(0x1f << 26)
+#define		TUSB_INT_SRC_RESERVED_18		(0x3f << 18)
+#define		TUSB_INT_SRC_RESERVED_10		(0x03 << 10)
+
+/* Reserved bits for NOR flash interrupt mask and clear register */
+#define		TUSB_INT_MASK_RESERVED_BITS	(TUSB_INT_MASK_RESERVED_17 | \
+						TUSB_INT_MASK_RESERVED_13 | \
+						TUSB_INT_MASK_RESERVED_8)
+
+/* Reserved bits for NOR flash interrupt status register */
+#define		TUSB_INT_SRC_RESERVED_BITS	(TUSB_INT_SRC_RESERVED_26 | \
+						TUSB_INT_SRC_RESERVED_18 | \
+						TUSB_INT_SRC_RESERVED_10)
+
+#define TUSB_GPIO_REV			(TUSB_SYS_REG_BASE + 0x080)
+#define TUSB_GPIO_CONF			(TUSB_SYS_REG_BASE + 0x084)
+#define TUSB_DMA_CTRL_REV		(TUSB_SYS_REG_BASE + 0x100)
+#define TUSB_DMA_REQ_CONF		(TUSB_SYS_REG_BASE + 0x104)
+#define TUSB_EP0_CONF			(TUSB_SYS_REG_BASE + 0x108)
+#define TUSB_DMA_EP_MAP			(TUSB_SYS_REG_BASE + 0x148)
+
+/* Offsets from each ep base register */
+#define TUSB_EP_TX_OFFSET		0x10c	/* EP_IN in docs */
+#define TUSB_EP_RX_OFFSET		0x14c	/* EP_OUT in docs */
+#define TUSB_EP_MAX_PACKET_SIZE_OFFSET	0x188
+
+#define TUSB_WAIT_COUNT			(TUSB_SYS_REG_BASE + 0x1c8)
+#define TUSB_SCRATCH_PAD		(TUSB_SYS_REG_BASE + 0x1c4)
+#define TUSB_PROD_TEST_RESET		(TUSB_SYS_REG_BASE + 0x1d8)
+
+/* Device System & Control register bitfields */
+#define TUSB_INT_CTRL_CONF_INT_RELCYC(v)	(((v) & 0x7) << 18)
+#define TUSB_INT_CTRL_CONF_INT_POLARITY		(1 << 17)
+#define TUSB_INT_CTRL_CONF_INT_MODE		(1 << 16)
+#define TUSB_GPIO_CONF_DMAREQ(v)		(((v) & 0x3f) << 24)
+#define TUSB_DMA_REQ_CONF_BURST_SIZE(v)		(((v) & 3) << 26)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_EN(v)		(((v) & 0x3f) << 20)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(v)	(((v) & 0xf) << 16)
+#define TUSB_EP0_CONFIG_SW_EN			(1 << 8)
+#define TUSB_EP0_CONFIG_DIR_TX			(1 << 7)
+#define TUSB_EP0_CONFIG_XFR_SIZE(v)		((v) & 0x7f)
+#define TUSB_EP_CONFIG_SW_EN			(1 << 31)
+#define TUSB_EP_CONFIG_XFR_SIZE(v)		((v) & 0x7fffffff)
+#define TUSB_PROD_TEST_RESET_VAL		0xa596
+#define TUSB_EP_FIFO(ep)			(TUSB_FIFO_BASE + (ep) * 0x20)
+
+#define TUSB_DIDR1_LO				(TUSB_SYS_REG_BASE + 0x1f8)
+#define TUSB_DIDR1_HI				(TUSB_SYS_REG_BASE + 0x1fc)
+#define		TUSB_DIDR1_HI_CHIP_REV(v)		(((v) >> 17) & 0xf)
+#define			TUSB_DIDR1_HI_REV_20		0
+#define			TUSB_DIDR1_HI_REV_30		1
+#define			TUSB_DIDR1_HI_REV_31		2
+
+#define TUSB_REV_10	0x10
+#define TUSB_REV_20	0x20
+#define TUSB_REV_30	0x30
+#define TUSB_REV_31	0x31
+
+#endif /* __TUSB6010_H__ */
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
new file mode 100644
index 00000000000..52f7f29cebd
--- /dev/null
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -0,0 +1,719 @@
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+
+#include "musb_core.h"
+
+#define to_chdat(c)		((struct tusb_omap_dma_ch *)(c)->private_data)
+
+#define MAX_DMAREQ		5	/* REVISIT: Really 6, but req5 not OK */
+
+struct tusb_omap_dma_ch {
+	struct musb		*musb;
+	void __iomem		*tbase;
+	unsigned long		phys_offset;
+	int			epnum;
+	u8			tx;
+	struct musb_hw_ep	*hw_ep;
+
+	int			ch;
+	s8			dmareq;
+	s8			sync_dev;
+
+	struct tusb_omap_dma	*tusb_dma;
+
+	void __iomem		*dma_addr;
+
+	u32			len;
+	u16			packet_sz;
+	u16			transfer_packet_sz;
+	u32			transfer_len;
+	u32			completed_len;
+};
+
+struct tusb_omap_dma {
+	struct dma_controller		controller;
+	struct musb			*musb;
+	void __iomem			*tbase;
+
+	int				ch;
+	s8				dmareq;
+	s8				sync_dev;
+	unsigned			multichannel:1;
+};
+
+static int tusb_omap_dma_start(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+
+	/* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+
+	return 0;
+}
+
+static int tusb_omap_dma_stop(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+
+	/* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+
+	return 0;
+}
+
+/*
+ * Allocate dmareq0 to the current channel unless it's already taken
+ */
+static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+	if (reg != 0) {
+		DBG(3, "ep%i dmareq0 is busy for ep%i\n",
+			chdat->epnum, reg & 0xf);
+		return -EAGAIN;
+	}
+
+	if (chdat->tx)
+		reg = (1 << 4) | chdat->epnum;
+	else
+		reg = chdat->epnum;
+
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	return 0;
+}
+
+static inline void tusb_omap_free_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+	if ((reg & 0xf) != chdat->epnum) {
+		printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n",
+			chdat->epnum, reg & 0xf);
+		return;
+	}
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, 0);
+}
+
+/*
+ * See also musb_dma_completion in plat_uds.c and musb_g_[tx|rx]() in
+ * musb_gadget.c.
+ */
+static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct dma_channel	*channel = (struct dma_channel *)data;
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
+	struct musb		*musb = chdat->musb;
+	struct musb_hw_ep	*hw_ep = chdat->hw_ep;
+	void __iomem		*ep_conf = hw_ep->conf;
+	void __iomem		*mbase = musb->mregs;
+	unsigned long		remaining, flags, pio;
+	int			ch;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (tusb_dma->multichannel)
+		ch = chdat->ch;
+	else
+		ch = tusb_dma->ch;
+
+	if (ch_status != OMAP_DMA_BLOCK_IRQ)
+		printk(KERN_ERR "TUSB DMA error status: %i\n", ch_status);
+
+	DBG(3, "ep%i %s dma callback ch: %i status: %x\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		ch, ch_status);
+
+	if (chdat->tx)
+		remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+	else
+		remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+	remaining = TUSB_EP_CONFIG_XFR_SIZE(remaining);
+
+	/* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */
+	if (unlikely(remaining > chdat->transfer_len)) {
+		DBG(2, "Corrupt %s dma ch%i XFR_SIZE: 0x%08lx\n",
+			chdat->tx ? "tx" : "rx", chdat->ch,
+			remaining);
+		remaining = 0;
+	}
+
+	channel->actual_len = chdat->transfer_len - remaining;
+	pio = chdat->len - channel->actual_len;
+
+	DBG(3, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len);
+
+	/* Transfer remaining 1 - 31 bytes */
+	if (pio > 0 && pio < 32) {
+		u8	*buf;
+
+		DBG(3, "Using PIO for remaining %lu bytes\n", pio);
+		buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
+		if (chdat->tx) {
+			dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
+					chdat->transfer_len, DMA_TO_DEVICE);
+			musb_write_fifo(hw_ep, pio, buf);
+		} else {
+			musb_read_fifo(hw_ep, pio, buf);
+			dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
+					chdat->transfer_len, DMA_FROM_DEVICE);
+		}
+		channel->actual_len += pio;
+	}
+
+	if (!tusb_dma->multichannel)
+		tusb_omap_free_shared_dmareq(chdat);
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+
+	/* Handle only RX callbacks here. TX callbacks must be handled based
+	 * on the TUSB DMA status interrupt.
+	 * REVISIT: Use both TUSB DMA status interrupt and OMAP DMA callback
+	 * interrupt for RX and TX.
+	 */
+	if (!chdat->tx)
+		musb_dma_completion(musb, chdat->epnum, chdat->tx);
+
+	/* We must terminate short tx transfers manually by setting TXPKTRDY.
+	 * REVISIT: This same problem may occur with other MUSB dma as well.
+	 * Easy to test with g_ether by pinging the MUSB board with ping -s54.
+	 */
+	if ((chdat->transfer_len < chdat->packet_sz)
+			|| (chdat->transfer_len % chdat->packet_sz != 0)) {
+		u16	csr;
+
+		if (chdat->tx) {
+			DBG(3, "terminating short tx packet\n");
+			musb_ep_select(mbase, chdat->epnum);
+			csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+			csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY
+				| MUSB_TXCSR_P_WZC_BITS;
+			musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+		}
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
+				u8 rndis_mode, dma_addr_t dma_addr, u32 len)
+{
+	struct tusb_omap_dma_ch		*chdat = to_chdat(channel);
+	struct tusb_omap_dma		*tusb_dma = chdat->tusb_dma;
+	struct musb			*musb = chdat->musb;
+	struct musb_hw_ep		*hw_ep = chdat->hw_ep;
+	void __iomem			*mbase = musb->mregs;
+	void __iomem			*ep_conf = hw_ep->conf;
+	dma_addr_t			fifo = hw_ep->fifo_sync;
+	struct omap_dma_channel_params	dma_params;
+	u32				dma_remaining;
+	int				src_burst, dst_burst;
+	u16				csr;
+	int				ch;
+	s8				dmareq;
+	s8				sync_dev;
+
+	if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
+		return false;
+
+	/*
+	 * HW issue #10: Async dma will eventually corrupt the XFR_SIZE
+	 * register which will cause missed DMA interrupt. We could try to
+	 * use a timer for the callback, but it is unsafe as the XFR_SIZE
+	 * register is corrupt, and we won't know if the DMA worked.
+	 */
+	if (dma_addr & 0x2)
+		return false;
+
+	/*
+	 * Because of HW issue #10, it seems like mixing sync DMA and async
+	 * PIO access can confuse the DMA. Make sure XFR_SIZE is reset before
+	 * using the channel for DMA.
+	 */
+	if (chdat->tx)
+		dma_remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+	else
+		dma_remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+	dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining);
+	if (dma_remaining) {
+		DBG(2, "Busy %s dma ch%i, not using: %08x\n",
+			chdat->tx ? "tx" : "rx", chdat->ch,
+			dma_remaining);
+		return false;
+	}
+
+	chdat->transfer_len = len & ~0x1f;
+
+	if (len < packet_sz)
+		chdat->transfer_packet_sz = chdat->transfer_len;
+	else
+		chdat->transfer_packet_sz = packet_sz;
+
+	if (tusb_dma->multichannel) {
+		ch = chdat->ch;
+		dmareq = chdat->dmareq;
+		sync_dev = chdat->sync_dev;
+	} else {
+		if (tusb_omap_use_shared_dmareq(chdat) != 0) {
+			DBG(3, "could not get dma for ep%i\n", chdat->epnum);
+			return false;
+		}
+		if (tusb_dma->ch < 0) {
+			/* REVISIT: This should get blocked earlier, happens
+			 * with MSC ErrorRecoveryTest
+			 */
+			WARN_ON(1);
+			return false;
+		}
+
+		ch = tusb_dma->ch;
+		dmareq = tusb_dma->dmareq;
+		sync_dev = tusb_dma->sync_dev;
+		omap_set_dma_callback(ch, tusb_omap_dma_cb, channel);
+	}
+
+	chdat->packet_sz = packet_sz;
+	chdat->len = len;
+	channel->actual_len = 0;
+	chdat->dma_addr = (void __iomem *)dma_addr;
+	channel->status = MUSB_DMA_STATUS_BUSY;
+
+	/* Since we're recycling dma areas, we need to clean or invalidate */
+	if (chdat->tx)
+		dma_cache_maint(phys_to_virt(dma_addr), len, DMA_TO_DEVICE);
+	else
+		dma_cache_maint(phys_to_virt(dma_addr), len, DMA_FROM_DEVICE);
+
+	/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
+	if ((dma_addr & 0x3) == 0) {
+		dma_params.data_type = OMAP_DMA_DATA_TYPE_S32;
+		dma_params.elem_count = 8;		/* Elements in frame */
+	} else {
+		dma_params.data_type = OMAP_DMA_DATA_TYPE_S16;
+		dma_params.elem_count = 16;		/* Elements in frame */
+		fifo = hw_ep->fifo_async;
+	}
+
+	dma_params.frame_count	= chdat->transfer_len / 32; /* Burst sz frame */
+
+	DBG(3, "ep%i %s dma ch%i dma: %08x len: %u(%u) packet_sz: %i(%i)\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		ch, dma_addr, chdat->transfer_len, len,
+		chdat->transfer_packet_sz, packet_sz);
+
+	/*
+	 * Prepare omap DMA for transfer
+	 */
+	if (chdat->tx) {
+		dma_params.src_amode	= OMAP_DMA_AMODE_POST_INC;
+		dma_params.src_start	= (unsigned long)dma_addr;
+		dma_params.src_ei	= 0;
+		dma_params.src_fi	= 0;
+
+		dma_params.dst_amode	= OMAP_DMA_AMODE_DOUBLE_IDX;
+		dma_params.dst_start	= (unsigned long)fifo;
+		dma_params.dst_ei	= 1;
+		dma_params.dst_fi	= -31;	/* Loop 32 byte window */
+
+		dma_params.trigger	= sync_dev;
+		dma_params.sync_mode	= OMAP_DMA_SYNC_FRAME;
+		dma_params.src_or_dst_synch	= 0;	/* Dest sync */
+
+		src_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 read */
+		dst_burst = OMAP_DMA_DATA_BURST_8;	/* 8x32 write */
+	} else {
+		dma_params.src_amode	= OMAP_DMA_AMODE_DOUBLE_IDX;
+		dma_params.src_start	= (unsigned long)fifo;
+		dma_params.src_ei	= 1;
+		dma_params.src_fi	= -31;	/* Loop 32 byte window */
+
+		dma_params.dst_amode	= OMAP_DMA_AMODE_POST_INC;
+		dma_params.dst_start	= (unsigned long)dma_addr;
+		dma_params.dst_ei	= 0;
+		dma_params.dst_fi	= 0;
+
+		dma_params.trigger	= sync_dev;
+		dma_params.sync_mode	= OMAP_DMA_SYNC_FRAME;
+		dma_params.src_or_dst_synch	= 1;	/* Source sync */
+
+		src_burst = OMAP_DMA_DATA_BURST_8;	/* 8x32 read */
+		dst_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 write */
+	}
+
+	DBG(3, "ep%i %s using %i-bit %s dma from 0x%08lx to 0x%08lx\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		(dma_params.data_type == OMAP_DMA_DATA_TYPE_S32) ? 32 : 16,
+		((dma_addr & 0x3) == 0) ? "sync" : "async",
+		dma_params.src_start, dma_params.dst_start);
+
+	omap_set_dma_params(ch, &dma_params);
+	omap_set_dma_src_burst_mode(ch, src_burst);
+	omap_set_dma_dest_burst_mode(ch, dst_burst);
+	omap_set_dma_write_mode(ch, OMAP_DMA_WRITE_LAST_NON_POSTED);
+
+	/*
+	 * Prepare MUSB for DMA transfer
+	 */
+	if (chdat->tx) {
+		musb_ep_select(mbase, chdat->epnum);
+		csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+		csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+	} else {
+		musb_ep_select(mbase, chdat->epnum);
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_DMAENAB;
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE);
+		musb_writew(hw_ep->regs, MUSB_RXCSR,
+			csr | MUSB_RXCSR_P_WZC_BITS);
+	}
+
+	/*
+	 * Start DMA transfer
+	 */
+	omap_start_dma(ch);
+
+	if (chdat->tx) {
+		/* Send transfer_packet_sz packets at a time */
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
+			chdat->transfer_packet_sz);
+
+		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+	} else {
+		/* Receive transfer_packet_sz packets at a time */
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
+			chdat->transfer_packet_sz << 16);
+
+		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+	}
+
+	return true;
+}
+
+static int tusb_omap_dma_abort(struct dma_channel *channel)
+{
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
+
+	if (!tusb_dma->multichannel) {
+		if (tusb_dma->ch >= 0) {
+			omap_stop_dma(tusb_dma->ch);
+			omap_free_dma(tusb_dma->ch);
+			tusb_dma->ch = -1;
+		}
+
+		tusb_dma->dmareq = -1;
+		tusb_dma->sync_dev = -1;
+	}
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+
+	return 0;
+}
+
+static inline int tusb_omap_dma_allocate_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+	int		i, dmareq_nr = -1;
+
+	const int sync_dev[6] = {
+		OMAP24XX_DMA_EXT_DMAREQ0,
+		OMAP24XX_DMA_EXT_DMAREQ1,
+		OMAP242X_DMA_EXT_DMAREQ2,
+		OMAP242X_DMA_EXT_DMAREQ3,
+		OMAP242X_DMA_EXT_DMAREQ4,
+		OMAP242X_DMA_EXT_DMAREQ5,
+	};
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		int cur = (reg & (0xf << (i * 5))) >> (i * 5);
+		if (cur == 0) {
+			dmareq_nr = i;
+			break;
+		}
+	}
+
+	if (dmareq_nr == -1)
+		return -EAGAIN;
+
+	reg |= (chdat->epnum << (dmareq_nr * 5));
+	if (chdat->tx)
+		reg |= ((1 << 4) << (dmareq_nr * 5));
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	chdat->dmareq = dmareq_nr;
+	chdat->sync_dev = sync_dev[chdat->dmareq];
+
+	return 0;
+}
+
+static inline void tusb_omap_dma_free_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32 reg;
+
+	if (!chdat || chdat->dmareq < 0)
+		return;
+
+	reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+	reg &= ~(0x1f << (chdat->dmareq * 5));
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	chdat->dmareq = -1;
+	chdat->sync_dev = -1;
+}
+
+static struct dma_channel *dma_channel_pool[MAX_DMAREQ];
+
+static struct dma_channel *
+tusb_omap_dma_allocate(struct dma_controller *c,
+		struct musb_hw_ep *hw_ep,
+		u8 tx)
+{
+	int ret, i;
+	const char		*dev_name;
+	struct tusb_omap_dma	*tusb_dma;
+	struct musb		*musb;
+	void __iomem		*tbase;
+	struct dma_channel	*channel = NULL;
+	struct tusb_omap_dma_ch	*chdat = NULL;
+	u32			reg;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+	musb = tusb_dma->musb;
+	tbase = musb->ctrl_base;
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
+	if (tx)
+		reg &= ~(1 << hw_ep->epnum);
+	else
+		reg &= ~(1 << (hw_ep->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
+
+	/* REVISIT: Why does dmareq5 not work? */
+	if (hw_ep->epnum == 0) {
+		DBG(3, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx");
+		return NULL;
+	}
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel *ch = dma_channel_pool[i];
+		if (ch->status == MUSB_DMA_STATUS_UNKNOWN) {
+			ch->status = MUSB_DMA_STATUS_FREE;
+			channel = ch;
+			chdat = ch->private_data;
+			break;
+		}
+	}
+
+	if (!channel)
+		return NULL;
+
+	if (tx) {
+		chdat->tx = 1;
+		dev_name = "TUSB transmit";
+	} else {
+		chdat->tx = 0;
+		dev_name = "TUSB receive";
+	}
+
+	chdat->musb = tusb_dma->musb;
+	chdat->tbase = tusb_dma->tbase;
+	chdat->hw_ep = hw_ep;
+	chdat->epnum = hw_ep->epnum;
+	chdat->dmareq = -1;
+	chdat->completed_len = 0;
+	chdat->tusb_dma = tusb_dma;
+
+	channel->max_len = 0x7fffffff;
+	channel->desired_mode = 0;
+	channel->actual_len = 0;
+
+	if (tusb_dma->multichannel) {
+		ret = tusb_omap_dma_allocate_dmareq(chdat);
+		if (ret != 0)
+			goto free_dmareq;
+
+		ret = omap_request_dma(chdat->sync_dev, dev_name,
+				tusb_omap_dma_cb, channel, &chdat->ch);
+		if (ret != 0)
+			goto free_dmareq;
+	} else if (tusb_dma->ch == -1) {
+		tusb_dma->dmareq = 0;
+		tusb_dma->sync_dev = OMAP24XX_DMA_EXT_DMAREQ0;
+
+		/* Callback data gets set later in the shared dmareq case */
+		ret = omap_request_dma(tusb_dma->sync_dev, "TUSB shared",
+				tusb_omap_dma_cb, NULL, &tusb_dma->ch);
+		if (ret != 0)
+			goto free_dmareq;
+
+		chdat->dmareq = -1;
+		chdat->ch = -1;
+	}
+
+	DBG(3, "ep%i %s dma: %s dma%i dmareq%i sync%i\n",
+		chdat->epnum,
+		chdat->tx ? "tx" : "rx",
+		chdat->ch >= 0 ? "dedicated" : "shared",
+		chdat->ch >= 0 ? chdat->ch : tusb_dma->ch,
+		chdat->dmareq >= 0 ? chdat->dmareq : tusb_dma->dmareq,
+		chdat->sync_dev >= 0 ? chdat->sync_dev : tusb_dma->sync_dev);
+
+	return channel;
+
+free_dmareq:
+	tusb_omap_dma_free_dmareq(chdat);
+
+	DBG(3, "ep%i: Could not get a DMA channel\n", chdat->epnum);
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+	return NULL;
+}
+
+static void tusb_omap_dma_release(struct dma_channel *channel)
+{
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct musb		*musb = chdat->musb;
+	void __iomem		*tbase = musb->ctrl_base;
+	u32			reg;
+
+	DBG(3, "ep%i ch%i\n", chdat->epnum, chdat->ch);
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
+	if (chdat->tx)
+		reg |= (1 << chdat->epnum);
+	else
+		reg |= (1 << (chdat->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_CLEAR);
+	if (chdat->tx)
+		reg |= (1 << chdat->epnum);
+	else
+		reg |= (1 << (chdat->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_CLEAR, reg);
+
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+	if (chdat->ch >= 0) {
+		omap_stop_dma(chdat->ch);
+		omap_free_dma(chdat->ch);
+		chdat->ch = -1;
+	}
+
+	if (chdat->dmareq >= 0)
+		tusb_omap_dma_free_dmareq(chdat);
+
+	channel = NULL;
+}
+
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+	int			i;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel *ch = dma_channel_pool[i];
+		if (ch) {
+			kfree(ch->private_data);
+			kfree(ch);
+		}
+	}
+
+	if (!tusb_dma->multichannel && tusb_dma && tusb_dma->ch >= 0)
+		omap_free_dma(tusb_dma->ch);
+
+	kfree(tusb_dma);
+}
+
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	void __iomem		*tbase = musb->ctrl_base;
+	struct tusb_omap_dma	*tusb_dma;
+	int			i;
+
+	/* REVISIT: Get dmareq lines used from board-*.c */
+
+	musb_writel(musb->ctrl_base, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(musb->ctrl_base, TUSB_DMA_EP_MAP, 0);
+
+	musb_writel(tbase, TUSB_DMA_REQ_CONF,
+		TUSB_DMA_REQ_CONF_BURST_SIZE(2)
+		| TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f)
+		| TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+	tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL);
+	if (!tusb_dma)
+		goto cleanup;
+
+	tusb_dma->musb = musb;
+	tusb_dma->tbase = musb->ctrl_base;
+
+	tusb_dma->ch = -1;
+	tusb_dma->dmareq = -1;
+	tusb_dma->sync_dev = -1;
+
+	tusb_dma->controller.start = tusb_omap_dma_start;
+	tusb_dma->controller.stop = tusb_omap_dma_stop;
+	tusb_dma->controller.channel_alloc = tusb_omap_dma_allocate;
+	tusb_dma->controller.channel_release = tusb_omap_dma_release;
+	tusb_dma->controller.channel_program = tusb_omap_dma_program;
+	tusb_dma->controller.channel_abort = tusb_omap_dma_abort;
+
+	if (tusb_get_revision(musb) >= TUSB_REV_30)
+		tusb_dma->multichannel = 1;
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel	*ch;
+		struct tusb_omap_dma_ch	*chdat;
+
+		ch = kzalloc(sizeof(struct dma_channel), GFP_KERNEL);
+		if (!ch)
+			goto cleanup;
+
+		dma_channel_pool[i] = ch;
+
+		chdat = kzalloc(sizeof(struct tusb_omap_dma_ch), GFP_KERNEL);
+		if (!chdat)
+			goto cleanup;
+
+		ch->status = MUSB_DMA_STATUS_UNKNOWN;
+		ch->private_data = chdat;
+	}
+
+	return &tusb_dma->controller;
+
+cleanup:
+	dma_controller_destroy(&tusb_dma->controller);
+
+	return NULL;
+}
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 8878c1767fc..70338f4ec91 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -499,9 +499,10 @@ config USB_SERIAL_SAFE_PADDED
 config USB_SERIAL_SIERRAWIRELESS
 	tristate "USB Sierra Wireless Driver"
 	help
-	  Say M here if you want to use a Sierra Wireless device (if
-	  using an PC 5220 or AC580 please use the Airprime driver
-	  instead).
+	  Say M here if you want to use Sierra Wireless devices.
+
+	  Many deviecs have a feature known as TRU-Install, for those devices
+	  to work properly the USB Storage Sierra feature must be enabled.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called sierra.
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 7b74238ad1c..e980766bb84 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -161,7 +161,7 @@ static int usb_console_setup(struct console *co, char *options)
 		if (serial->type->set_termios) {
 			termios->c_cflag = cflag;
 			tty_termios_encode_baud_rate(termios, baud, baud);
-			serial->type->set_termios(NULL, port, &dummy);
+			serial->type->set_termios(tty, port, &dummy);
 
 			port->port.tty = NULL;
 			kfree(termios);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 83871725014..984f6eff4c4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -563,6 +563,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -637,6 +638,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
@@ -646,6 +648,10 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ },					/* Optional parameter entry */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index a577ea44dcf..382265bba96 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -524,7 +524,9 @@
 #define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
 #define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
 #define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
 #define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
+#define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
 
 /*
  * Definitions for ID TECH (www.idt-net.com) devices
@@ -815,6 +817,11 @@
 #define OLIMEX_VID			0x15BA
 #define OLIMEX_ARM_USB_OCD_PID		0x0003
 
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
+
 /* www.elsterelectricity.com Elster Unicom III Optical Probe */
 #define FTDI_ELSTER_UNICOM_PID		0xE700 /* Product Id */
 
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 2e663f1afd5..d9538208807 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -38,8 +38,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-#include <linux/version.h>
-
 /* the mode to be set when the port ist opened */
 static int initial_mode = 1;
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e4eca95f2b0..9f9cd36455f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -173,6 +173,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define KYOCERA_PRODUCT_KPC680			0x180a
 
 #define ANYDATA_VENDOR_ID			0x16d5
+#define ANYDATA_PRODUCT_ADU_620UW		0x6202
 #define ANYDATA_PRODUCT_ADU_E100A		0x6501
 #define ANYDATA_PRODUCT_ADU_500A		0x6502
 
@@ -186,6 +187,23 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define BANDRICH_VENDOR_ID			0x1A8D
 #define BANDRICH_PRODUCT_C100_1			0x1002
 #define BANDRICH_PRODUCT_C100_2			0x1003
+#define BANDRICH_PRODUCT_1004			0x1004
+#define BANDRICH_PRODUCT_1005			0x1005
+#define BANDRICH_PRODUCT_1006			0x1006
+#define BANDRICH_PRODUCT_1007			0x1007
+#define BANDRICH_PRODUCT_1008			0x1008
+#define BANDRICH_PRODUCT_1009			0x1009
+#define BANDRICH_PRODUCT_100A			0x100a
+
+#define BANDRICH_PRODUCT_100B			0x100b
+#define BANDRICH_PRODUCT_100C			0x100c
+#define BANDRICH_PRODUCT_100D			0x100d
+#define BANDRICH_PRODUCT_100E			0x100e
+
+#define BANDRICH_PRODUCT_100F			0x100f
+#define BANDRICH_PRODUCT_1010			0x1010
+#define BANDRICH_PRODUCT_1011			0x1011
+#define BANDRICH_PRODUCT_1012			0x1012
 
 #define AMOI_VENDOR_ID			0x1614
 #define AMOI_PRODUCT_9508			0x0800
@@ -197,6 +215,10 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
 
+/* ZTE PRODUCTS */
+#define ZTE_VENDOR_ID				0x19d2
+#define ZTE_PRODUCT_MF628			0x0015
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -297,17 +319,34 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8138) },	/* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
 	{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -346,11 +385,7 @@ static struct usb_serial_driver option_1port_device = {
 	.read_int_callback = option_instat_callback,
 };
 
-#ifdef CONFIG_USB_DEBUG
 static int debug;
-#else
-#define debug 0
-#endif
 
 /* per port private data */
 
@@ -954,8 +989,5 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-#ifdef CONFIG_USB_DEBUG
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug messages");
-#endif
-
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 2c9c446ad62..1ede1441cb1 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -90,7 +90,6 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
 	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
 	{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
-	{ USB_DEVICE(HL340_VENDOR_ID, HL340_PRODUCT_ID) },
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 6ac3bbcf7a2..a3bd039c78e 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -107,10 +107,6 @@
 #define COREGA_VENDOR_ID	0x07aa
 #define COREGA_PRODUCT_ID	0x002a
 
-/* HL HL-340 (ID: 4348:5523) */
-#define HL340_VENDOR_ID		0x4348
-#define HL340_PRODUCT_ID	0x5523
-
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID	0x05ad
 #define YCCABLE_PRODUCT_ID	0x0fba
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 2f6f1523ec5..706033753ad 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.2.9c"
+#define DRIVER_VERSION "v.1.2.13a"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -31,6 +31,7 @@
 #define SWIMS_USB_REQUEST_SetPower	0x00
 #define SWIMS_USB_REQUEST_SetNmea	0x07
 #define SWIMS_USB_REQUEST_SetMode	0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo	0x0A
 #define SWIMS_SET_MODE_Modem		0x0001
 
 /* per port private data */
@@ -40,18 +41,11 @@
 
 static int debug;
 static int nmea;
-static int truinstall = 1;
-
-enum devicetype {
-	DEVICE_3_PORT =		0,
-	DEVICE_1_PORT =		1,
-	DEVICE_INSTALLER =	2,
-};
 
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
 	int result;
-	dev_dbg(&udev->dev, "%s", "SET POWER STATE\n");
+	dev_dbg(&udev->dev, "%s", __func__);
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetPower,	/* __u8 request      */
 			USB_TYPE_VENDOR,		/* __u8 request type */
@@ -63,25 +57,10 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 	return result;
 }
 
-static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
-{
-	int result;
-	dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH\n");
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			SWIMS_USB_REQUEST_SetMode,	/* __u8 request      */
-			USB_TYPE_VENDOR,		/* __u8 request type */
-			eSWocMode,			/* __u16 value       */
-			0x0000,				/* __u16 index       */
-			NULL,				/* void *data        */
-			0,				/* __u16 size 	     */
-			USB_CTRL_SET_TIMEOUT);		/* int timeout       */
-	return result;
-}
-
 static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
 {
 	int result;
-	dev_dbg(&udev->dev, "%s", "NMEA Enable sent\n");
+	dev_dbg(&udev->dev, "%s", __func__);
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetNmea,	/* __u8 request      */
 			USB_TYPE_VENDOR,		/* __u8 request type */
@@ -97,6 +76,7 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 {
 	int result;
 	int *num_ports = usb_get_serial_data(serial);
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
 	result = *num_ports;
 
@@ -110,22 +90,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 
 static int sierra_calc_interface(struct usb_serial *serial)
 {
-		int interface;
-		struct usb_interface *p_interface;
-		struct usb_host_interface *p_host_interface;
+	int interface;
+	struct usb_interface *p_interface;
+	struct usb_host_interface *p_host_interface;
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
-		/* Get the interface structure pointer from the serial struct */
-		p_interface = serial->interface;
+	/* Get the interface structure pointer from the serial struct */
+	p_interface = serial->interface;
 
-		/* Get a pointer to the host interface structure */
-		p_host_interface = p_interface->cur_altsetting;
+	/* Get a pointer to the host interface structure */
+	p_host_interface = p_interface->cur_altsetting;
 
-		/* read the interface descriptor for this active altsetting
-		 * to find out the interface number we are on
-		*/
-		interface = p_host_interface->desc.bInterfaceNumber;
+	/* read the interface descriptor for this active altsetting
+	 * to find out the interface number we are on
+	*/
+	interface = p_host_interface->desc.bInterfaceNumber;
 
-		return interface;
+	return interface;
 }
 
 static int sierra_probe(struct usb_serial *serial,
@@ -135,43 +116,40 @@ static int sierra_probe(struct usb_serial *serial,
 	struct usb_device *udev;
 	int *num_ports;
 	u8 ifnum;
+	u8 numendpoints;
+
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
 	num_ports = kmalloc(sizeof(*num_ports), GFP_KERNEL);
 	if (!num_ports)
 		return -ENOMEM;
 
 	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
 	udev = serial->dev;
 
-		/* Figure out the interface number from the serial structure */
-		ifnum = sierra_calc_interface(serial);
-
-		/*
-		 * If this interface supports more than 1 alternate
-		 * select the 2nd one
-		 */
-		if (serial->interface->num_altsetting == 2) {
-			dev_dbg(&udev->dev,
-				"Selecting alt setting for interface %d\n",
-				ifnum);
+	/* Figure out the interface number from the serial structure */
+	ifnum = sierra_calc_interface(serial);
 
-			/* We know the alternate setting is 1 for the MC8785 */
-			usb_set_interface(udev, ifnum, 1);
-		}
+	/*
+	 * If this interface supports more than 1 alternate
+	 * select the 2nd one
+	 */
+	if (serial->interface->num_altsetting == 2) {
+		dev_dbg(&udev->dev, "Selecting alt setting for interface %d\n",
+			ifnum);
+		/* We know the alternate setting is 1 for the MC8785 */
+		usb_set_interface(udev, ifnum, 1);
+	}
 
-	/* Check if in installer mode */
-	if (truinstall && id->driver_info == DEVICE_INSTALLER) {
-		dev_dbg(&udev->dev, "%s", "FOUND TRU-INSTALL DEVICE(SW)\n");
-		result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
-		/* Don't bind to the device when in installer mode */
-		kfree(num_ports);
-		return -EIO;
-	} else if (id->driver_info == DEVICE_1_PORT)
-		*num_ports = 1;
-	else if (ifnum == 0x99)
+	/* Dummy interface present on some SKUs should be ignored */
+	if (ifnum == 0x99)
 		*num_ports = 0;
+	else if (numendpoints <= 3)
+		*num_ports = 1;
 	else
-		*num_ports = 3;
+		*num_ports = (numendpoints-1)/2;
+
 	/*
 	 * save off our num_ports info so that we can use it in the
 	 * calc_num_ports callback
@@ -187,40 +165,50 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x0f30, 0x1b1d) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
+	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
 	{ USB_DEVICE(0x1199, 0x0220) },	/* Sierra Wireless MC5725 */
 	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
 	{ USB_DEVICE(0x1199, 0x0021) },	/* Sierra Wireless AirCard 597E */
 	{ USB_DEVICE(0x1199, 0x0120) },	/* Sierra Wireless USB Dongle 595U */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) }, /* Sierra Wireless C597 */
+	 /* Sierra Wireless C597 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
+	 /* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
+	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
 
 	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
 	{ USB_DEVICE(0x1199, 0x6812) },	/* Sierra Wireless MC8775 & AC 875U */
-	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 (Thinkpad internal) */
+	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 (Lenovo) */
 	{ USB_DEVICE(0x1199, 0x6815) },	/* Sierra Wireless MC8775 */
 	{ USB_DEVICE(0x03f0, 0x1e1d) },	/* HP hs2300 a.k.a MC8775 */
 	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
 	{ USB_DEVICE(0x1199, 0x6821) },	/* Sierra Wireless AirCard 875U */
-	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780*/
-	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781*/
-	{ USB_DEVICE(0x1199, 0x683B), .driver_info = DEVICE_1_PORT },	/* Sierra Wireless MC8785 Composite*/
+	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780 */
+	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
+	{ USB_DEVICE(0x1199, 0x683C) },	/* Sierra Wireless MC8790 */
+	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8790 */
+	{ USB_DEVICE(0x1199, 0x683E) },	/* Sierra Wireless MC8790 */
 	{ USB_DEVICE(0x1199, 0x6850) },	/* Sierra Wireless AirCard 880 */
 	{ USB_DEVICE(0x1199, 0x6851) },	/* Sierra Wireless AirCard 881 */
 	{ USB_DEVICE(0x1199, 0x6852) },	/* Sierra Wireless AirCard 880 E */
 	{ USB_DEVICE(0x1199, 0x6853) },	/* Sierra Wireless AirCard 881 E */
 	{ USB_DEVICE(0x1199, 0x6855) },	/* Sierra Wireless AirCard 880 U */
 	{ USB_DEVICE(0x1199, 0x6856) },	/* Sierra Wireless AirCard 881 U */
-	{ USB_DEVICE(0x1199, 0x6859), .driver_info = DEVICE_1_PORT },	/* Sierra Wireless AirCard 885 E */
-	{ USB_DEVICE(0x1199, 0x685A), .driver_info = DEVICE_1_PORT },	/* Sierra Wireless AirCard 885 E */
-
-	{ USB_DEVICE(0x1199, 0x6468) }, /* Sierra Wireless MP3G - EVDO */
-	{ USB_DEVICE(0x1199, 0x6469) }, /* Sierra Wireless MP3G - UMTS/HSPA */
-
-	{ USB_DEVICE(0x1199, 0x0112), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 580 */
-	{ USB_DEVICE(0x0F3D, 0x0112), .driver_info = DEVICE_1_PORT }, /* Airprime/Sierra PC 5220 */
+	{ USB_DEVICE(0x1199, 0x6859) },	/* Sierra Wireless AirCard 885 E */
+	{ USB_DEVICE(0x1199, 0x685A) },	/* Sierra Wireless AirCard 885 E */
+	/* Sierra Wireless C885 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
+
+	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
+	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 
-	{ USB_DEVICE(0x1199, 0x0FFF), .driver_info = DEVICE_INSTALLER},
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -268,13 +256,19 @@ static int sierra_send_setup(struct tty_struct *tty,
 		if (portdata->rts_state)
 			val |= 0x02;
 
-		/* Determine which port is targeted */
-		if (port->bulk_out_endpointAddress == 2)
-			interface = 0;
-		else if (port->bulk_out_endpointAddress == 4)
-			interface = 1;
-		else if (port->bulk_out_endpointAddress == 5)
-			interface = 2;
+		/* If composite device then properly report interface */
+		if (serial->num_ports == 1)
+			interface = sierra_calc_interface(serial);
+
+		/* Otherwise the need to do non-composite mapping */
+		else {
+			if (port->bulk_out_endpointAddress == 2)
+				interface = 0;
+			else if (port->bulk_out_endpointAddress == 4)
+				interface = 1;
+			else if (port->bulk_out_endpointAddress == 5)
+				interface = 2;
+		}
 
 		return usb_control_msg(serial->dev,
 				usb_rcvctrlpipe(serial->dev, 0),
@@ -713,7 +707,7 @@ static void sierra_shutdown(struct usb_serial *serial)
 static struct usb_serial_driver sierra_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
-		.name =		"sierra1",
+		.name =		"sierra",
 	},
 	.description       = "Sierra USB modem",
 	.id_table          = id_table,
@@ -769,14 +763,8 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-module_param(truinstall, bool, 0);
-MODULE_PARM_DESC(truinstall, "TRU-Install support");
-
-module_param(nmea, bool, 0);
+module_param(nmea, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(nmea, "NMEA streaming");
 
-#ifdef CONFIG_USB_DEBUG
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug messages");
-#endif
-
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 8c2d531eede..b157c48e8b7 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -122,9 +122,6 @@ static void return_serial(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	if (serial == NULL)
-		return;
-
 	for (i = 0; i < serial->num_ports; ++i)
 		serial_table[serial->minor + i] = NULL;
 }
@@ -142,7 +139,8 @@ static void destroy_serial(struct kref *kref)
 	serial->type->shutdown(serial);
 
 	/* return the minor range that this device had */
-	return_serial(serial);
+	if (serial->minor != SERIAL_TTY_NO_MINOR)
+		return_serial(serial);
 
 	for (i = 0; i < serial->num_ports; ++i)
 		serial->port[i]->port.count = 0;
@@ -575,6 +573,7 @@ static struct usb_serial *create_serial(struct usb_device *dev,
 	serial->interface = interface;
 	kref_init(&serial->kref);
 	mutex_init(&serial->disc_mutex);
+	serial->minor = SERIAL_TTY_NO_MINOR;
 
 	return serial;
 }
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 3d9249632ae..c76034672c1 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -146,6 +146,18 @@ config USB_STORAGE_KARMA
 	  on the resulting scsi device node returns the Karma to normal
 	  operation.
 
+config USB_STORAGE_SIERRA
+	bool "Sierra Wireless TRU-Install Feature Support"
+	depends on USB_STORAGE
+	help
+	  Say Y here to include additional code to support Sierra Wireless
+	  products with the TRU-Install feature (e.g., AC597E, AC881U).
+
+	  This code switches the Sierra Wireless device from being in
+	  Mass Storage mode to Modem mode. It also has the ability to
+	  support host software upgrades should full Linux support be added
+	  to TRU-Install.
+
 config USB_STORAGE_CYPRESS_ATACB
 	bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
 	depends on USB_STORAGE
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 4c596c766c5..bc3415b475c 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -21,6 +21,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= alauda.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= onetouch.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)	+= karma.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA)	+= sierra_ms.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 7a4d4567722..73ac7262239 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -26,8 +26,6 @@
  * (http://www.freecom.de/)
  */
 
-#include <linux/hdreg.h>
-
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
new file mode 100644
index 00000000000..4359a2cb42d
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.c
@@ -0,0 +1,207 @@
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <linux/usb.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "sierra_ms.h"
+#include "debug.h"
+
+#define SWIMS_USB_REQUEST_SetSwocMode	0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo	0x0A
+#define SWIMS_USB_INDEX_SetMode		0x0000
+#define SWIMS_SET_MODE_Modem		0x0001
+
+#define TRU_NORMAL 			0x01
+#define TRU_FORCE_MS 			0x02
+#define TRU_FORCE_MODEM 		0x03
+
+static unsigned int swi_tru_install = 1;
+module_param(swi_tru_install, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(swi_tru_install, "TRU-Install mode (1=Full Logic (def),"
+		 " 2=Force CD-Rom, 3=Force Modem)");
+
+struct swoc_info {
+	__u8 rev;
+	__u8 reserved[8];
+	__u16 LinuxSKU;
+	__u16 LinuxVer;
+	__u8 reserved2[47];
+} __attribute__((__packed__));
+
+static bool containsFullLinuxPackage(struct swoc_info *swocInfo)
+{
+	if ((swocInfo->LinuxSKU >= 0x2100 && swocInfo->LinuxSKU <= 0x2FFF) ||
+	   (swocInfo->LinuxSKU >= 0x7100 && swocInfo->LinuxSKU <= 0x7FFF))
+		return true;
+	else
+		return false;
+}
+
+static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
+{
+	int result;
+	US_DEBUGP("SWIMS: %s", "DEVICE MODE SWITCH\n");
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			SWIMS_USB_REQUEST_SetSwocMode,	/* __u8 request      */
+			USB_TYPE_VENDOR | USB_DIR_OUT,	/* __u8 request type */
+			eSWocMode,			/* __u16 value       */
+			0x0000,				/* __u16 index       */
+			NULL,				/* void *data        */
+			0,				/* __u16 size 	     */
+			USB_CTRL_SET_TIMEOUT);		/* int timeout       */
+	return result;
+}
+
+
+static int sierra_get_swoc_info(struct usb_device *udev,
+				struct swoc_info *swocInfo)
+{
+	int result;
+
+	US_DEBUGP("SWIMS: Attempting to get TRU-Install info.\n");
+
+	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			SWIMS_USB_REQUEST_GetSwocInfo,	/* __u8 request      */
+			USB_TYPE_VENDOR | USB_DIR_IN,	/* __u8 request type */
+			0,				/* __u16 value       */
+			0,				/* __u16 index       */
+			(void *) swocInfo,		/* void *data        */
+			sizeof(struct swoc_info),	/* __u16 size 	     */
+			USB_CTRL_SET_TIMEOUT);		/* int timeout 	     */
+
+	swocInfo->LinuxSKU = le16_to_cpu(swocInfo->LinuxSKU);
+	swocInfo->LinuxVer = le16_to_cpu(swocInfo->LinuxVer);
+	return result;
+}
+
+static void debug_swoc(struct swoc_info *swocInfo)
+{
+	US_DEBUGP("SWIMS: SWoC Rev: %02d \n", swocInfo->rev);
+	US_DEBUGP("SWIMS: Linux SKU: %04X \n", swocInfo->LinuxSKU);
+	US_DEBUGP("SWIMS: Linux Version: %04X \n", swocInfo->LinuxVer);
+}
+
+
+static ssize_t show_truinst(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct swoc_info *swocInfo;
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+	int result;
+	if (swi_tru_install == TRU_FORCE_MS) {
+		result = snprintf(buf, PAGE_SIZE, "Forced Mass Storage\n");
+	} else {
+		swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL);
+		if (!swocInfo) {
+			US_DEBUGP("SWIMS: Allocation failure\n");
+			snprintf(buf, PAGE_SIZE, "Error\n");
+			return -ENOMEM;
+		}
+		result = sierra_get_swoc_info(udev, swocInfo);
+		if (result < 0) {
+			US_DEBUGP("SWIMS: failed SWoC query\n");
+			kfree(swocInfo);
+			snprintf(buf, PAGE_SIZE, "Error\n");
+			return -EIO;
+		}
+		debug_swoc(swocInfo);
+		result = snprintf(buf, PAGE_SIZE,
+			"REV=%02d SKU=%04X VER=%04X\n",
+			swocInfo->rev,
+			swocInfo->LinuxSKU,
+			swocInfo->LinuxVer);
+		kfree(swocInfo);
+	}
+	return result;
+}
+static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+
+int sierra_ms_init(struct us_data *us)
+{
+	int result, retries;
+	signed long delay_t;
+	struct swoc_info *swocInfo;
+	struct usb_device *udev;
+	struct Scsi_Host *sh;
+	struct scsi_device *sd;
+
+	delay_t = 2;
+	retries = 3;
+	result = 0;
+	udev = us->pusb_dev;
+
+	sh = us_to_host(us);
+	sd = scsi_get_host_dev(sh);
+
+	US_DEBUGP("SWIMS: sierra_ms_init called\n");
+
+	/* Force Modem mode */
+	if (swi_tru_install == TRU_FORCE_MODEM) {
+		US_DEBUGP("SWIMS: %s", "Forcing Modem Mode\n");
+		result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
+		if (result < 0)
+			US_DEBUGP("SWIMS: Failed to switch to modem mode.\n");
+		return -EIO;
+	}
+	/* Force Mass Storage mode (keep CD-Rom) */
+	else if (swi_tru_install == TRU_FORCE_MS) {
+		US_DEBUGP("SWIMS: %s", "Forcing Mass Storage Mode\n");
+		goto complete;
+	}
+	/* Normal TRU-Install Logic */
+	else {
+		US_DEBUGP("SWIMS: %s", "Normal SWoC Logic\n");
+
+		swocInfo = kmalloc(sizeof(struct swoc_info),
+				GFP_KERNEL);
+		if (!swocInfo) {
+			US_DEBUGP("SWIMS: %s", "Allocation failure\n");
+			return -ENOMEM;
+		}
+
+		retries = 3;
+		do {
+			retries--;
+			result = sierra_get_swoc_info(udev, swocInfo);
+			if (result < 0) {
+				US_DEBUGP("SWIMS: %s", "Failed SWoC query\n");
+				schedule_timeout_uninterruptible(2*HZ);
+			}
+		} while (retries && result < 0);
+
+		if (result < 0) {
+			US_DEBUGP("SWIMS: %s",
+				  "Completely failed SWoC query\n");
+			kfree(swocInfo);
+			return -EIO;
+		}
+
+		debug_swoc(swocInfo);
+
+		/* If there is not Linux software on the TRU-Install device
+		 * then switch to modem mode
+		 */
+		if (!containsFullLinuxPackage(swocInfo)) {
+			US_DEBUGP("SWIMS: %s",
+				"Switching to Modem Mode\n");
+			result = sierra_set_ms_mode(udev,
+				SWIMS_SET_MODE_Modem);
+			if (result < 0)
+				US_DEBUGP("SWIMS: Failed to switch modem\n");
+			kfree(swocInfo);
+			return -EIO;
+		}
+		kfree(swocInfo);
+	}
+complete:
+	result = device_create_file(&us->pusb_intf->dev, &dev_attr_truinst);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
diff --git a/drivers/usb/storage/sierra_ms.h b/drivers/usb/storage/sierra_ms.h
new file mode 100644
index 00000000000..bb48634ac1f
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.h
@@ -0,0 +1,4 @@
+#ifndef _SIERRA_MS_H_
+#define _SIERRA_MS_H_
+extern int sierra_ms_init(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fcbbfdb7b2b..3523a0bfa0f 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1032,8 +1032,21 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	/* try to compute the actual residue, based on how much data
 	 * was really transferred and what the device tells us */
-	if (residue) {
-		if (!(us->fflags & US_FL_IGNORE_RESIDUE)) {
+	if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
+
+		/* Heuristically detect devices that generate bogus residues
+		 * by seeing what happens with INQUIRY and READ CAPACITY
+		 * commands.
+		 */
+		if (bcs->Status == US_BULK_STAT_OK &&
+				scsi_get_resid(srb) == 0 &&
+					((srb->cmnd[0] == INQUIRY &&
+						transfer_length == 36) ||
+					(srb->cmnd[0] == READ_CAPACITY &&
+						transfer_length == 8))) {
+			us->fflags |= US_FL_IGNORE_RESIDUE;
+
+		} else {
 			residue = min(residue, transfer_length);
 			scsi_set_resid(srb, max(scsi_get_resid(srb),
 			                                       (int) residue));
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 7ae69f55aa9..ba412e68d47 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -225,6 +225,13 @@ UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Cedric Godin <cedric@belbone.be> */
+UNUSUAL_DEV(  0x0421, 0x04b9, 0x0551, 0x0551,
+		"Nokia",
+		"5300",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		"SMSC",
@@ -356,14 +363,14 @@ UNUSUAL_DEV(  0x04b0, 0x040f, 0x0100, 0x0200,
 		US_FL_FIX_CAPACITY),
 
 /* Reported by Emil Larsson <emil@swip.net> */
-UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0110,
+UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0111,
 		"NIKON",
 		"NIKON DSC D80",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
 /* Reported by Ortwin Glueck <odi@odi.ch> */
-UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0110,
+UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0111,
 		"NIKON",
 		"NIKON DSC D40",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -1185,6 +1192,13 @@ UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
+/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
+		"Simple Tech/Datafab",
+		"CF+SM Reader",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
  * to the USB storage specification in two ways:
  * - They tell us they are using transport protocol CBI. In reality they
@@ -1562,6 +1576,7 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		0),
 
+#ifdef CONFIG_USB_STORAGE_SIERRA
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
@@ -1570,8 +1585,9 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
 		"Sierra Wireless",
 		"USB MMC Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_IGNORE_DEVICE),
+		US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
+		0),
+#endif
 
 /* Reported by Jaco Kroon <jaco@kroon.co.za>
  * The usb-storage module found on the Digitech GNX4 (and supposedly other
@@ -1743,6 +1759,15 @@ UNUSUAL_DEV(  0x22b8, 0x4810, 0x0001, 0x0002,
 		US_FL_FIX_CAPACITY),
 
 /*
+ * Patch by Jost Diederichs <jost@qdusa.com>
+ */
+UNUSUAL_DEV(0x22b8, 0x6410, 0x0001, 0x9999,
+		"Motorola Inc.",
+		"Motorola Phone (RAZRV3xx)",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
+/*
  * Patch by Constantin Baranov <const@tltsu.ru>
  * Report by Andreas Koenecke.
  * Motorola ROKR Z6.
@@ -1767,6 +1792,13 @@ UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
+UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
+		"iRiver",
+		"MP3 T10",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /*
  * David Härdeman <david@2gen.com>
  * The key makes the SCSI stack print confusing (but harmless) messages
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index bfea851be98..73679aa506d 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -102,6 +102,9 @@
 #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
 #include "cypress_atacb.h"
 #endif
+#ifdef CONFIG_USB_STORAGE_SIERRA
+#include "sierra_ms.h"
+#endif
 
 /* Some informational data */
 MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0ebc1bfd251..a6b55297a7f 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -118,7 +118,6 @@ obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_SH7343VOU)	  += sh7343_voufb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 017233d0c48..61c3d3f40fd 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -29,7 +29,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -339,7 +339,7 @@ acornfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 #endif
 
 #ifdef HAS_VIDC20
-#include <asm/arch/acornfb.h>
+#include <mach/acornfb.h>
 
 #define MAX_SIZE	2*1024*1024
 
diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c
index 32dd8512693..0c35b8b0160 100644
--- a/drivers/video/am200epd.c
+++ b/drivers/video/am200epd.c
@@ -33,7 +33,7 @@
 
 #include <video/metronomefb.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 /* register offsets for gpio control */
 #define LED_GPIO_PIN 51
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index 5001bd4ef46..314d18694b6 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -11,7 +11,6 @@
  *  Code is based on s3fb
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -958,20 +957,20 @@ static int __devinit ark_pci_probe(struct pci_dev *dev, const struct pci_device_
 	/* Prepare PCI device */
 	rc = pci_enable_device(dev);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot enable PCI device\n");
+		dev_err(info->device, "cannot enable PCI device\n");
 		goto err_enable_device;
 	}
 
 	rc = pci_request_regions(dev, "arkfb");
 	if (rc < 0) {
-		dev_err(info->dev, "cannot reserve framebuffer region\n");
+		dev_err(info->device, "cannot reserve framebuffer region\n");
 		goto err_request_regions;
 	}
 
 	par->dac = ics5342_init(ark_dac_read_regs, ark_dac_write_regs, info);
 	if (! par->dac) {
 		rc = -ENOMEM;
-		dev_err(info->dev, "RAMDAC initialization failed\n");
+		dev_err(info->device, "RAMDAC initialization failed\n");
 		goto err_dac;
 	}
 
@@ -982,7 +981,7 @@ static int __devinit ark_pci_probe(struct pci_dev *dev, const struct pci_device_
 	info->screen_base = pci_iomap(dev, 0, 0);
 	if (! info->screen_base) {
 		rc = -ENOMEM;
-		dev_err(info->dev, "iomap for framebuffer failed\n");
+		dev_err(info->device, "iomap for framebuffer failed\n");
 		goto err_iomap;
 	}
 
@@ -1004,19 +1003,19 @@ static int __devinit ark_pci_probe(struct pci_dev *dev, const struct pci_device_
 	rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
 	if (! ((rc == 1) || (rc == 2))) {
 		rc = -EINVAL;
-		dev_err(info->dev, "mode %s not found\n", mode_option);
+		dev_err(info->device, "mode %s not found\n", mode_option);
 		goto err_find_mode;
 	}
 
 	rc = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot allocate colormap\n");
+		dev_err(info->device, "cannot allocate colormap\n");
 		goto err_alloc_cmap;
 	}
 
 	rc = register_framebuffer(info);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot register framebugger\n");
+		dev_err(info->device, "cannot register framebugger\n");
 		goto err_reg_fb;
 	}
 
@@ -1090,7 +1089,7 @@ static int ark_pci_suspend (struct pci_dev* dev, pm_message_t state)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct arkfb_info *par = info->par;
 
-	dev_info(info->dev, "suspend\n");
+	dev_info(info->device, "suspend\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
@@ -1121,16 +1120,13 @@ static int ark_pci_resume (struct pci_dev* dev)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct arkfb_info *par = info->par;
 
-	dev_info(info->dev, "resume\n");
+	dev_info(info->device, "resume\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
 
-	if (par->ref_count == 0) {
-		mutex_unlock(&(par->open_lock));
-		release_console_sem();
-		return 0;
-	}
+	if (par->ref_count == 0)
+		goto fail;
 
 	pci_set_power_state(dev, PCI_D0);
 	pci_restore_state(dev);
@@ -1143,8 +1139,8 @@ static int ark_pci_resume (struct pci_dev* dev)
 	arkfb_set_par(info);
 	fb_set_suspend(info, 0);
 
-	mutex_unlock(&(par->open_lock));
 fail:
+	mutex_unlock(&(par->open_lock));
 	release_console_sem();
 	return 0;
 }
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 5b3a15dffb5..75dac578104 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -18,9 +18,9 @@
 #include <linux/delay.h>
 #include <linux/backlight.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/gpio.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -39,7 +39,9 @@
 #endif
 
 #if defined(CONFIG_ARCH_AT91)
-#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
+					 | FBINFO_PARTIAL_PAN_OK \
+					 | FBINFO_HWACCEL_YPAN)
 
 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
 					struct fb_var_screeninfo *var)
@@ -177,7 +179,7 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
 	.type		= FB_TYPE_PACKED_PIXELS,
 	.visual		= FB_VISUAL_TRUECOLOR,
 	.xpanstep	= 0,
-	.ypanstep	= 0,
+	.ypanstep	= 1,
 	.ywrapstep	= 0,
 	.accel		= FB_ACCEL_NONE,
 };
@@ -206,6 +208,36 @@ static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
 	return value;
 }
 
+static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
+{
+	/* Turn off the LCD controller and the DMA controller */
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+			sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+	/* Wait for the LCDC core to become idle */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+		msleep(10);
+
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+}
+
+static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
+{
+	atmel_lcdfb_stop_nowait(sinfo);
+
+	/* Wait for DMA engine to become idle... */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+		msleep(10);
+}
+
+static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
+{
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+		| ATMEL_LCDC_PWR);
+}
+
 static void atmel_lcdfb_update_dma(struct fb_info *info,
 			       struct fb_var_screeninfo *var)
 {
@@ -240,9 +272,11 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 {
 	struct fb_info *info = sinfo->info;
 	struct fb_var_screeninfo *var = &info->var;
+	unsigned int smem_len;
 
-	info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-			    * ((var->bits_per_pixel + 7) / 8));
+	smem_len = (var->xres_virtual * var->yres_virtual
+		    * ((var->bits_per_pixel + 7) / 8));
+	info->fix.smem_len = max(smem_len, sinfo->smem_len);
 
 	info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
 					(dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
@@ -416,26 +450,8 @@ static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
 {
 	might_sleep();
 
-	/* LCD power off */
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
-	/* wait for the LCDC core to become idle */
-	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
-		msleep(10);
-
-	/* DMA disable */
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-
-	/* wait for DMA engine to become idle */
-	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
-		msleep(10);
-
-	/* LCD power on */
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-
-	/* DMA enable */
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+	atmel_lcdfb_stop(sinfo);
+	atmel_lcdfb_start(sinfo);
 }
 
 /**
@@ -467,14 +483,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
 		 info->var.xres, info->var.yres,
 		 info->var.xres_virtual, info->var.yres_virtual);
 
-	/* Turn off the LCD controller and the DMA controller */
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
-	/* Wait for the LCDC core to become idle */
-	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
-		msleep(10);
-
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+	atmel_lcdfb_stop_nowait(sinfo);
 
 	if (info->var.bits_per_pixel == 1)
 		info->fix.visual = FB_VISUAL_MONO01;
@@ -579,13 +588,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
 	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 		msleep(10);
 
-	dev_dbg(info->device, "  * re-enable DMA engine\n");
-	/* ...and enable it with updated configuration */
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-
-	dev_dbg(info->device, "  * re-enable LCDC core\n");
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+	atmel_lcdfb_start(sinfo);
 
 	dev_dbg(info->device, "  * DONE\n");
 
@@ -794,6 +797,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 		sinfo->default_monspecs = pdata_sinfo->default_monspecs;
 		sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
 		sinfo->guard_time = pdata_sinfo->guard_time;
+		sinfo->smem_len = pdata_sinfo->smem_len;
 		sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
 		sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
 	} else {
@@ -934,7 +938,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	ret = register_framebuffer(info);
 	if (ret < 0) {
 		dev_err(dev, "failed to register framebuffer device: %d\n", ret);
-		goto free_cmap;
+		goto reset_drvdata;
 	}
 
 	/* add selected videomode to modelist */
@@ -950,7 +954,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 
 	return 0;
 
-
+reset_drvdata:
+	dev_set_drvdata(dev, NULL);
 free_cmap:
 	fb_dealloc_cmap(&info->cmap);
 unregister_irqs:
@@ -987,10 +992,11 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct fb_info *info = dev_get_drvdata(dev);
-	struct atmel_lcdfb_info *sinfo = info->par;
+	struct atmel_lcdfb_info *sinfo;
 
-	if (!sinfo)
+	if (!info || !info->par)
 		return 0;
+	sinfo = info->par;
 
 	cancel_work_sync(&sinfo->task);
 	exit_backlight(sinfo);
@@ -1025,11 +1031,20 @@ static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
 	struct fb_info *info = platform_get_drvdata(pdev);
 	struct atmel_lcdfb_info *sinfo = info->par;
 
+	/*
+	 * We don't want to handle interrupts while the clock is
+	 * stopped. It may take forever.
+	 */
+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
 	sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
 	if (sinfo->atmel_lcdfb_power_control)
 		sinfo->atmel_lcdfb_power_control(0);
+
+	atmel_lcdfb_stop(sinfo);
 	atmel_lcdfb_stop_clock(sinfo);
+
 	return 0;
 }
 
@@ -1039,9 +1054,15 @@ static int atmel_lcdfb_resume(struct platform_device *pdev)
 	struct atmel_lcdfb_info *sinfo = info->par;
 
 	atmel_lcdfb_start_clock(sinfo);
+	atmel_lcdfb_start(sinfo);
 	if (sinfo->atmel_lcdfb_power_control)
 		sinfo->atmel_lcdfb_power_control(1);
 	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
+
+	/* Enable FIFO & DMA errors */
+	lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
+			| ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+
 	return 0;
 }
 
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 620ba812036..cc6b470073d 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -244,7 +244,7 @@ static int atyfb_sync(struct fb_info *info);
      */
 
 static int aty_init(struct fb_info *info);
-static void aty_resume_chip(struct fb_info *info);
+
 #ifdef CONFIG_ATARI
 static int store_video_par(char *videopar, unsigned char m64_num);
 #endif
@@ -2023,6 +2023,20 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	return 0;
 }
 
+static void aty_resume_chip(struct fb_info *info)
+{
+	struct atyfb_par *par = info->par;
+
+	aty_st_le32(MEM_CNTL, par->mem_cntl, par);
+
+	if (par->pll_ops->resume_pll)
+		par->pll_ops->resume_pll(info, &par->pll);
+
+	if (par->aux_start)
+		aty_st_le32(BUS_CNTL,
+			aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
+}
+
 static int atyfb_pci_resume(struct pci_dev *pdev)
 {
 	struct fb_info *info = pci_get_drvdata(pdev);
@@ -2659,19 +2673,6 @@ aty_init_exit:
 	return ret;
 }
 
-static void aty_resume_chip(struct fb_info *info)
-{
-	struct atyfb_par *par = info->par;
-
-	aty_st_le32(MEM_CNTL, par->mem_cntl, par);
-
-	if (par->pll_ops->resume_pll)
-		par->pll_ops->resume_pll(info, &par->pll);
-
-	if (par->aux_start)
-		aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
-}
-
 #ifdef CONFIG_ATARI
 static int __devinit store_video_par(char *video_str, unsigned char m64_num)
 {
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c
index 3ca27cb13ca..aa95f835024 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/aty/radeon_accel.c
@@ -55,6 +55,10 @@ static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo,
 	OUTREG(DP_WRITE_MSK, 0xffffffff);
 	OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM));
 
+	radeon_fifo_wait(2);
+	OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
+	OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
+
 	radeon_fifo_wait(2);  
 	OUTREG(DST_Y_X, (region->dy << 16) | region->dx);
 	OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height);
@@ -116,6 +120,10 @@ static void radeonfb_prim_copyarea(struct radeonfb_info *rinfo,
 	OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0)
 			| (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
 
+	radeon_fifo_wait(2);
+	OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
+	OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
+
 	radeon_fifo_wait(3);
 	OUTREG(SRC_Y_X, (sy << 16) | sx);
 	OUTREG(DST_Y_X, (dy << 16) | dx);
@@ -241,8 +249,8 @@ void radeonfb_engine_reset(struct radeonfb_info *rinfo)
 	INREG(HOST_PATH_CNTL);
 	OUTREG(HOST_PATH_CNTL, host_path_cntl);
 
-	if (rinfo->family != CHIP_FAMILY_R300 ||
-	    rinfo->family != CHIP_FAMILY_R350 ||
+	if (rinfo->family != CHIP_FAMILY_R300 &&
+	    rinfo->family != CHIP_FAMILY_R350 &&
 	    rinfo->family != CHIP_FAMILY_RV350)
 		OUTREG(RBBM_SOFT_RESET, rbbm_soft_reset);
 
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index f9e7c29ad9b..8c8fa35f1b7 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -69,7 +69,8 @@ static int radeon_setup_i2c_bus(struct radeon_i2c_chan *chan, const char *name)
 {
 	int rc;
 
-	strcpy(chan->adapter.name, name);
+	snprintf(chan->adapter.name, sizeof(chan->adapter.name),
+		 "radeonfb %s", name);
 	chan->adapter.owner		= THIS_MODULE;
 	chan->adapter.id		= I2C_HW_B_RADEON;
 	chan->adapter.algo_data		= &chan->algo;
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index fbea2bd129c..6fa0b9d5559 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -18,7 +18,7 @@
 #include <linux/fb.h>
 #include <linux/backlight.h>
 
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 #include <asm/hp6xx.h>
 #include <asm/hd64461.h>
 
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index 891875d53a4..cbad67e8982 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -25,9 +25,9 @@
 #include <linux/fb.h>
 #include <linux/backlight.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/mux.h>
 
 #define OMAPBL_MAX_INTENSITY		0xff
 
diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
index 72d44dbfce8..738694d2388 100644
--- a/drivers/video/backlight/platform_lcd.c
+++ b/drivers/video/backlight/platform_lcd.c
@@ -92,7 +92,7 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev)
 
 	plcd->us = dev;
 	plcd->pdata = pdata;
-	plcd->lcd = lcd_device_register("platform-lcd", dev,
+	plcd->lcd = lcd_device_register(dev_name(dev), dev,
 					plcd, &platform_lcd_ops);
 	if (IS_ERR(plcd->lcd)) {
 		dev_err(dev, "cannot register lcd device\n");
@@ -101,6 +101,8 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, plcd);
+	platform_lcd_set_power(plcd->lcd, FB_BLANK_NORMAL);
+
 	return 0;
 
  err_mem:
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 6338d0e2fe0..ea07258565f 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -68,8 +68,10 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	struct pwm_bl_data *pb;
 	int ret;
 
-	if (!data)
+	if (!data) {
+		dev_err(&pdev->dev, "failed to find platform data\n");
 		return -EINVAL;
+	}
 
 	if (data->init) {
 		ret = data->init(&pdev->dev);
@@ -79,6 +81,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 
 	pb = kzalloc(sizeof(*pb), GFP_KERNEL);
 	if (!pb) {
+		dev_err(&pdev->dev, "no memory for state\n");
 		ret = -ENOMEM;
 		goto err_alloc;
 	}
@@ -91,7 +94,8 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "unable to request PWM for backlight\n");
 		ret = PTR_ERR(pb->pwm);
 		goto err_pwm;
-	}
+	} else
+		dev_dbg(&pdev->dev, "got pwm for backlight\n");
 
 	bl = backlight_device_register(pdev->name, &pdev->dev,
 			pb, &pwm_backlight_ops);
@@ -183,3 +187,5 @@ module_exit(pwm_backlight_exit);
 
 MODULE_DESCRIPTION("PWM based Backlight Driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pwm-backlight");
+
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 940467aed13..7644ed24956 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -58,7 +58,7 @@
 #include <asm/gpio.h>
 #include <asm/portmux.h>
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 #define NO_BL_SUPPORT
 
@@ -733,7 +733,6 @@ static int bfin_bf54x_remove(struct platform_device *pdev)
 static int bfin_bf54x_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct fb_info *fbinfo = platform_get_drvdata(pdev);
-	struct bfin_bf54xfb_info *info = fbinfo->par;
 
 	bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
 	disable_dma(CH_EPPI0);
@@ -747,8 +746,18 @@ static int bfin_bf54x_resume(struct platform_device *pdev)
 	struct fb_info *fbinfo = platform_get_drvdata(pdev);
 	struct bfin_bf54xfb_info *info = fbinfo->par;
 
-	enable_dma(CH_EPPI0);
-	bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+	if (info->lq043_open_cnt) {
+
+		bfin_write_EPPI0_CONTROL(0);
+		SSYNC();
+
+		config_dma(info);
+		config_ppi(info);
+
+		/* start dma */
+		enable_dma(CH_EPPI0);
+		bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+	}
 
 	return 0;
 }
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index c14b2435d23..e729fb27964 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -628,27 +628,18 @@ static long cirrusfb_get_mclk(long freq, int bpp, long *div)
 static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 			      struct fb_info *info)
 {
-	int nom, den;		/* translyting from pixels->bytes */
-	int yres, i;
-	static struct { int xres, yres; } modes[] =
-	{ { 1600, 1280 },
-	  { 1280, 1024 },
-	  { 1024, 768 },
-	  { 800, 600 },
-	  { 640, 480 },
-	  { -1, -1 } };
+	int yres;
+	/* memory size in pixels */
+	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
 
 	switch (var->bits_per_pixel) {
 	case 1:
-		nom = 4;
-		den = 8;
+		pixels /= 4;
 		break;		/* 8 pixel per byte, only 1/4th of mem usable */
 	case 8:
 	case 16:
 	case 24:
 	case 32:
-		nom = var->bits_per_pixel / 8;
-		den = 1;
 		break;		/* 1 pixel == 1 byte */
 	default:
 		printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..."
@@ -658,43 +649,29 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 
-	if (var->xres * nom / den * var->yres > info->screen_size) {
-		printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..."
-			"resolution too high to fit into video memory!\n",
-			var->xres, var->yres, var->bits_per_pixel);
-		DPRINTK("EXIT - EINVAL error\n");
-		return -EINVAL;
-	}
-
+	if (var->xres_virtual < var->xres)
+		var->xres_virtual = var->xres;
 	/* use highest possible virtual resolution */
-	if (var->xres_virtual == -1 &&
-	    var->yres_virtual == -1) {
-		printk(KERN_INFO
-		     "cirrusfb: using maximum available virtual resolution\n");
-		for (i = 0; modes[i].xres != -1; i++) {
-			int size = modes[i].xres * nom / den * modes[i].yres;
-			if (size < info->screen_size / 2)
-				break;
-		}
-		if (modes[i].xres == -1) {
-			printk(KERN_ERR "cirrusfb: could not find a virtual "
-				"resolution that fits into video memory!!\n");
-			DPRINTK("EXIT - EINVAL error\n");
-			return -EINVAL;
-		}
-		var->xres_virtual = modes[i].xres;
-		var->yres_virtual = modes[i].yres;
+	if (var->yres_virtual == -1) {
+		var->yres_virtual = pixels / var->xres_virtual;
 
 		printk(KERN_INFO "cirrusfb: virtual resolution set to "
 			"maximum of %dx%d\n", var->xres_virtual,
 			var->yres_virtual);
 	}
-
-	if (var->xres_virtual < var->xres)
-		var->xres_virtual = var->xres;
 	if (var->yres_virtual < var->yres)
 		var->yres_virtual = var->yres;
 
+	if (var->xres_virtual * var->yres_virtual > pixels) {
+		printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected... "
+		      "virtual resolution too high to fit into video memory!\n",
+			var->xres_virtual, var->yres_virtual,
+			var->bits_per_pixel);
+		DPRINTK("EXIT - EINVAL error\n");
+		return -EINVAL;
+	}
+
+
 	if (var->xoffset < 0)
 		var->xoffset = 0;
 	if (var->yoffset < 0)
diff --git a/drivers/video/clps711xfb.c b/drivers/video/clps711xfb.c
index 9f8a389dc7a..16f5db471ab 100644
--- a/drivers/video/clps711xfb.c
+++ b/drivers/video/clps711xfb.c
@@ -27,12 +27,12 @@
 #include <linux/proc_fs.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <linux/uaccess.h>
 
 #include <asm/hardware/clps7111.h>
-#include <asm/arch/syspld.h>
+#include <mach/syspld.h>
 
 struct fb_info	*cfb;
 
diff --git a/drivers/video/console/.gitignore b/drivers/video/console/.gitignore
new file mode 100644
index 00000000000..0c258b45439
--- /dev/null
+++ b/drivers/video/console/.gitignore
@@ -0,0 +1,2 @@
+# conmakehash generated file
+promcon_tbl.c
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 3ccfa76d9b2..c6299e8a041 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1311,6 +1311,9 @@ static void fbcon_clear(struct vc_data *vc, int sy, int sx, int height,
 	if (!height || !width)
 		return;
 
+	if (sy < vc->vc_top && vc->vc_top == logo_lines)
+		vc->vc_top = 0;
+
 	/* Split blits that cross physical y_wrap boundary */
 
 	y_break = p->vrows - p->yscroll;
@@ -2515,7 +2518,7 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h,
 			c = vc->vc_video_erase_char;
 			vc->vc_video_erase_char =
 			    ((c & 0xfe00) >> 1) | (c & 0xff);
-			c = vc->vc_def_color;
+			c = vc->vc_scrl_erase_char;
 			vc->vc_scrl_erase_char =
 			    ((c & 0xFE00) >> 1) | (c & 0xFF);
 			vc->vc_attr >>= 1;
@@ -2548,7 +2551,7 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h,
 			if (vc->vc_can_do_color) {
 				vc->vc_video_erase_char =
 				    ((c & 0xff00) << 1) | (c & 0xff);
-				c = vc->vc_def_color;
+				c = vc->vc_scrl_erase_char;
 				vc->vc_scrl_erase_char =
 				    ((c & 0xFF00) << 1) | (c & 0xFF);
 				vc->vc_attr <<= 1;
diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
index de1b1365279..a6e38e9ea73 100644
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -92,7 +92,7 @@ struct fbcon_ops {
 #define attr_fgcol(fgshift,s)    \
 	(((s) >> (fgshift)) & 0x0f)
 #define attr_bgcol(bgshift,s)    \
-	(((s) >> (bgshift)) & 0x07)
+	(((s) >> (bgshift)) & 0x0f)
 
 /* Monochrome */
 #define attr_bold(s) \
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index d7822af0e00..ef7870f5ea0 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -24,6 +24,7 @@
 #include <asm/hardware.h>
 #include <asm/parisc-device.h>
 #include <asm/cacheflush.h>
+#include <asm/grfioctl.h>
 
 #include "../sticore.h"
 
@@ -725,6 +726,7 @@ static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti,
 {
 	struct sti_cooked_rom *cooked;
 	struct sti_rom *raw = NULL;
+	unsigned long revno;
 
 	cooked = kmalloc(sizeof *cooked, GFP_KERNEL);
 	if (!cooked)
@@ -767,9 +769,35 @@ static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti,
 	sti->graphics_id[1] = raw->graphics_id[1];
 	
 	sti_dump_rom(raw);
-	
+
+	/* check if the ROM routines in this card are compatible */
+	if (wordmode || sti->graphics_id[1] != 0x09A02587)
+		goto ok;
+
+	revno = (raw->revno[0] << 8) | raw->revno[1];
+
+	switch (sti->graphics_id[0]) {
+	case S9000_ID_HCRX:
+		/* HyperA or HyperB ? */
+		if (revno == 0x8408 || revno == 0x840b)
+			goto msg_not_supported;
+		break;
+	case CRT_ID_THUNDER:
+		if (revno == 0x8509)
+			goto msg_not_supported;
+		break;
+	case CRT_ID_THUNDER2:
+		if (revno == 0x850c)
+			goto msg_not_supported;
+	}
+ok:
 	return 1;
 
+msg_not_supported:
+	printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n");
+	printk(KERN_ERR "Please see http://parisc-linux.org/faq/"
+			"graphics-howto.html for more info.\n");
+	/* fall through */
 out_err:
 	kfree(raw);
 	kfree(cooked);
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index d0e4cb61826..41d62632dcd 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1425,7 +1425,7 @@ static void cyberpro_common_resume(struct cfb_info *cfb)
 
 #ifdef CONFIG_ARCH_SHARK
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 static int __devinit cyberpro_vl_probe(void)
 {
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index cc2810ef5de..2735b79e52a 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -71,7 +71,7 @@ struct epson1355_par {
 #if defined(CONFIG_ARM)
 
 # ifdef CONFIG_ARCH_CEIVA
-#  include <asm/arch/hardware.h>
+#  include <mach/hardware.h>
 #  define EPSON1355FB_BASE_PHYS	(CEIVA_PHYS_SED1355)
 # endif
 
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 59df132cc37..4835bdc4e9f 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -114,6 +114,17 @@ static struct vm_operations_struct fb_deferred_io_vm_ops = {
 	.page_mkwrite	= fb_deferred_io_mkwrite,
 };
 
+static int fb_deferred_io_set_page_dirty(struct page *page)
+{
+	if (!PageDirty(page))
+		SetPageDirty(page);
+	return 0;
+}
+
+static const struct address_space_operations fb_deferred_io_aops = {
+	.set_page_dirty = fb_deferred_io_set_page_dirty,
+};
+
 static int fb_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma)
 {
 	vma->vm_ops = &fb_deferred_io_vm_ops;
@@ -163,6 +174,14 @@ void fb_deferred_io_init(struct fb_info *info)
 }
 EXPORT_SYMBOL_GPL(fb_deferred_io_init);
 
+void fb_deferred_io_open(struct fb_info *info,
+			 struct inode *inode,
+			 struct file *file)
+{
+	file->f_mapping->a_ops = &fb_deferred_io_aops;
+}
+EXPORT_SYMBOL_GPL(fb_deferred_io_open);
+
 void fb_deferred_io_cleanup(struct fb_info *info)
 {
 	void *screen_base = (void __force *) info->screen_base;
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 6b487801eea..98843c2ecf7 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1344,6 +1344,10 @@ fb_open(struct inode *inode, struct file *file)
 		if (res)
 			module_put(info->fbops->owner);
 	}
+#ifdef CONFIG_FB_DEFERRED_IO
+	if (info->fbdefio)
+		fb_deferred_io_open(info, inode, file);
+#endif
 out:
 	unlock_kernel();
 	return res;
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 9cd36c223d3..fb51197d1c9 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -479,6 +479,10 @@ static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
 	base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
 	base_plane_height = machine_data->fsl_diu_info[0]->var.yres;
 
+	if (mfbi->x_aoi_d < 0)
+		mfbi->x_aoi_d = 0;
+	if (mfbi->y_aoi_d < 0)
+		mfbi->y_aoi_d = 0;
 	switch (index) {
 	case 0:
 		if (mfbi->x_aoi_d != 0)
@@ -778,6 +782,22 @@ static void unmap_video_memory(struct fb_info *info)
 }
 
 /*
+ * Using the fb_var_screeninfo in fb_info we set the aoi of this
+ * particular framebuffer. It is a light version of fsl_diu_set_par.
+ */
+static int fsl_diu_set_aoi(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+	struct mfb_info *mfbi = info->par;
+	struct diu_ad *ad = mfbi->ad;
+
+	/* AOI should not be greater than display size */
+	ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
+	ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+	return 0;
+}
+
+/*
  * Using the fb_var_screeninfo in fb_info we set the resolution of this
  * particular framebuffer. This function alters the fb_fix_screeninfo stored
  * in fb_info. It does not alter var in fb_info since we are using that
@@ -817,11 +837,11 @@ static int fsl_diu_set_par(struct fb_info *info)
 		diu_ops.get_pixel_format(var->bits_per_pixel,
 					 machine_data->monitor_port);
 	ad->addr    = cpu_to_le32(info->fix.smem_start);
-	ad->src_size_g_alpha = cpu_to_le32((var->yres << 12) |
-				var->xres) | mfbi->g_alpha;
-	/* fix me. AOI should not be greater than display size */
+	ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
+				var->xres_virtual) | mfbi->g_alpha;
+	/* AOI should not be greater than display size */
 	ad->aoi_size 	= cpu_to_le32((var->yres << 16) | var->xres);
-	ad->offset_xyi = 0;
+	ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
 	ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
 
 	/* Disable chroma keying function */
@@ -921,6 +941,8 @@ static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
 	else
 		info->var.vmode &= ~FB_VMODE_YWRAP;
 
+	fsl_diu_set_aoi(info);
+
 	return 0;
 }
 
@@ -989,7 +1011,7 @@ static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
 		pr_debug("set AOI display offset of index %d to (%d,%d)\n",
 				 mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
 		fsl_diu_check_var(&info->var, info);
-		fsl_diu_set_par(info);
+		fsl_diu_set_aoi(info);
 		break;
 	case MFB_GET_AOID:
 		aoi_d.x_aoi_d = mfbi->x_aoi_d;
@@ -1649,8 +1671,10 @@ static int __init fsl_diu_init(void)
 	}
 
 	prop = of_get_property(np, "d-cache-size", NULL);
-	if (prop == NULL)
+	if (prop == NULL) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	/* Freescale PLRU requires 13/8 times the cache size to do a proper
 	   displacement flush
@@ -1659,8 +1683,10 @@ static int __init fsl_diu_init(void)
 	coherence_data_size /= 8;
 
 	prop = of_get_property(np, "d-cache-line-size", NULL);
-	if (prop == NULL)
+	if (prop == NULL) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 	d_cache_line_size = *prop;
 
 	of_node_put(np);
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 2e552d5bbb5..f89c3cce1e0 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -87,6 +87,8 @@ static int gbe_revision;
 static int ypan, ywrap;
 
 static uint32_t pseudo_palette[16];
+static uint32_t gbe_cmap[256];
+static int gbe_turned_on; /* 0 turned off, 1 turned on */
 
 static char *mode_option __initdata = NULL;
 
@@ -208,6 +210,8 @@ void gbe_turn_off(void)
 	int i;
 	unsigned int val, x, y, vpixen_off;
 
+	gbe_turned_on = 0;
+
 	/* check if pixel counter is on */
 	val = gbe->vt_xy;
 	if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1)
@@ -371,6 +375,22 @@ static void gbe_turn_on(void)
 	}
 	if (i == 10000)
 		printk(KERN_ERR "gbefb: turn on DMA timed out\n");
+
+	gbe_turned_on = 1;
+}
+
+static void gbe_loadcmap(void)
+{
+	int i, j;
+
+	for (i = 0; i < 256; i++) {
+		for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
+			udelay(10);
+		if (j == 1000)
+			printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+
+		gbe->cmap[i] = gbe_cmap[i];
+	}
 }
 
 /*
@@ -382,6 +402,7 @@ static int gbefb_blank(int blank, struct fb_info *info)
 	switch (blank) {
 	case FB_BLANK_UNBLANK:		/* unblank */
 		gbe_turn_on();
+		gbe_loadcmap();
 		break;
 
 	case FB_BLANK_NORMAL:		/* blank */
@@ -796,16 +817,10 @@ static int gbefb_set_par(struct fb_info *info)
 		gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8);
 
 	/* Initialize the color map */
-	for (i = 0; i < 256; i++) {
-		int j;
-
-		for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
-			udelay(10);
-		if (j == 1000)
-			printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+	for (i = 0; i < 256; i++)
+		gbe_cmap[i] = (i << 8) | (i << 16) | (i << 24);
 
-		gbe->cmap[i] = (i << 8) | (i << 16) | (i << 24);
-	}
+	gbe_loadcmap();
 
 	return 0;
 }
@@ -855,14 +870,17 @@ static int gbefb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	blue >>= 8;
 
 	if (info->var.bits_per_pixel <= 8) {
-		/* wait for the color map FIFO to have a free entry */
-		for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
-			udelay(10);
-		if (i == 1000) {
-			printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
-			return 1;
+		gbe_cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
+		if (gbe_turned_on) {
+			/* wait for the color map FIFO to have a free entry */
+			for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
+				udelay(10);
+			if (i == 1000) {
+				printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+				return 1;
+			}
+			gbe->cmap[regno] = gbe_cmap[regno];
 		}
-		gbe->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
 	} else if (regno < 16) {
 		switch (info->var.bits_per_pixel) {
 		case 15:
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 392a8be6aa7..e6467cf9f19 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -27,7 +27,7 @@
 #include <asm/pgtable.h>
 #include <asm/io.h>
 #include <asm/hd64461.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 
 #define	WIDTH 640
 
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 0c5a475c1ca..ccd986140c9 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -33,9 +33,9 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/imxfb.h>
+#include <mach/imxfb.h>
 
 /*
  * Complain if VAR is out of range.
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c
index 75ee5a12e54..c14e3e2212b 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/matrox/i2c-matroxfb.c
@@ -87,13 +87,7 @@ static int matroxfb_gpio_getscl(void* data) {
 	return (matroxfb_read_gpio(b->minfo) & b->mask.clock) ? 1 : 0;
 }
 
-static struct i2c_adapter matrox_i2c_adapter_template =
-{
-	.owner =	THIS_MODULE,
-	.id =		I2C_HW_B_G400,
-};
-
-static struct i2c_algo_bit_data matrox_i2c_algo_template =
+static const struct i2c_algo_bit_data matrox_i2c_algo_template =
 {
 	.setsda		= matroxfb_gpio_setsda,
 	.setscl		= matroxfb_gpio_setscl,
@@ -112,7 +106,7 @@ static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo,
 	b->minfo = minfo;
 	b->mask.data = data;
 	b->mask.clock = clock;
-	b->adapter = matrox_i2c_adapter_template;
+	b->adapter.owner = THIS_MODULE;
 	snprintf(b->adapter.name, sizeof(b->adapter.name), name,
 		minfo->fbcon.node);
 	i2c_set_adapdata(&b->adapter, b);
@@ -187,6 +181,17 @@ static void* i2c_matroxfb_probe(struct matrox_fb_info* minfo) {
 				  MAT_DATA, MAT_CLK, "MAVEN:fb%u", 0);
 		if (err)
 			printk(KERN_INFO "i2c-matroxfb: Could not register Maven i2c bus. Continuing anyway.\n");
+		else {
+			struct i2c_board_info maven_info = {
+				I2C_BOARD_INFO("maven", 0x1b),
+			};
+			unsigned short const addr_list[2] = {
+				0x1b, I2C_CLIENT_END
+			};
+
+			i2c_new_probed_device(&m2info->maven.adapter,
+					      &maven_info, addr_list);
+		}
 	}
 	return m2info;
 fail_ddc1:;
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 54e82f35353..c0213620279 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -2536,7 +2536,7 @@ module_param(fh, int, 0);
 MODULE_PARM_DESC(fh, "Startup horizontal frequency, 0-999kHz, 1000-INF Hz");
 module_param(fv, int, 0);
 MODULE_PARM_DESC(fv, "Startup vertical frequency, 0-INF Hz\n"
-"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\"\n");
+"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\"");
 module_param(grayscale, int, 0);
 MODULE_PARM_DESC(grayscale, "Sets display into grayscale. Works perfectly with paletized videomode (4, 8bpp), some limitations apply to 16, 24 and 32bpp videomodes (default=nograyscale)");
 module_param(cross4MB, int, 0);
diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/matrox/matroxfb_maven.c
index 89da27bd5c4..042408a8c63 100644
--- a/drivers/video/matrox/matroxfb_maven.c
+++ b/drivers/video/matrox/matroxfb_maven.c
@@ -19,8 +19,6 @@
 #include <linux/matroxfb.h>
 #include <asm/div64.h>
 
-#define MAVEN_I2CID	(0x1B)
-
 #define MGATVO_B	1
 #define MGATVO_C	2
 
@@ -128,7 +126,7 @@ static int get_ctrl_id(__u32 v4l2_id) {
 
 struct maven_data {
 	struct matrox_fb_info*		primary_head;
-	struct i2c_client		client;
+	struct i2c_client		*client;
 	int				version;
 };
 
@@ -974,7 +972,7 @@ static inline int maven_compute_timming(struct maven_data* md,
 
 static int maven_program_timming(struct maven_data* md,
 		const struct mavenregs* m) {
-	struct i2c_client* c = &md->client;
+	struct i2c_client *c = md->client;
 
 	if (m->mode == MATROXFB_OUTPUT_MODE_MONITOR) {
 		LR(0x80);
@@ -1011,7 +1009,7 @@ static int maven_program_timming(struct maven_data* md,
 }
 
 static inline int maven_resync(struct maven_data* md) {
-	struct i2c_client* c = &md->client;
+	struct i2c_client *c = md->client;
 	maven_set_reg(c, 0x95, 0x20);	/* start whole thing */
 	return 0;
 }
@@ -1069,48 +1067,48 @@ static int maven_set_control (struct maven_data* md,
 		  maven_compute_bwlevel(md, &blacklevel, &whitelevel);
 		  blacklevel = (blacklevel >> 2) | ((blacklevel & 3) << 8);
 		  whitelevel = (whitelevel >> 2) | ((whitelevel & 3) << 8);
-		  maven_set_reg_pair(&md->client, 0x0e, blacklevel);
-		  maven_set_reg_pair(&md->client, 0x1e, whitelevel);
+		  maven_set_reg_pair(md->client, 0x0e, blacklevel);
+		  maven_set_reg_pair(md->client, 0x1e, whitelevel);
 		}
 		break;
 		case V4L2_CID_SATURATION:
 		{
-		  maven_set_reg(&md->client, 0x20, p->value);
-		  maven_set_reg(&md->client, 0x22, p->value);
+		  maven_set_reg(md->client, 0x20, p->value);
+		  maven_set_reg(md->client, 0x22, p->value);
 		}
 		break;
 		case V4L2_CID_HUE:
 		{
-		  maven_set_reg(&md->client, 0x25, p->value);
+		  maven_set_reg(md->client, 0x25, p->value);
 		}
 		break;
 		case V4L2_CID_GAMMA:
 		{
 		  const struct maven_gamma* g;
 		  g = maven_compute_gamma(md);
-		  maven_set_reg(&md->client, 0x83, g->reg83);
-		  maven_set_reg(&md->client, 0x84, g->reg84);
-		  maven_set_reg(&md->client, 0x85, g->reg85);
-		  maven_set_reg(&md->client, 0x86, g->reg86);
-		  maven_set_reg(&md->client, 0x87, g->reg87);
-		  maven_set_reg(&md->client, 0x88, g->reg88);
-		  maven_set_reg(&md->client, 0x89, g->reg89);
-		  maven_set_reg(&md->client, 0x8a, g->reg8a);
-		  maven_set_reg(&md->client, 0x8b, g->reg8b);
+		  maven_set_reg(md->client, 0x83, g->reg83);
+		  maven_set_reg(md->client, 0x84, g->reg84);
+		  maven_set_reg(md->client, 0x85, g->reg85);
+		  maven_set_reg(md->client, 0x86, g->reg86);
+		  maven_set_reg(md->client, 0x87, g->reg87);
+		  maven_set_reg(md->client, 0x88, g->reg88);
+		  maven_set_reg(md->client, 0x89, g->reg89);
+		  maven_set_reg(md->client, 0x8a, g->reg8a);
+		  maven_set_reg(md->client, 0x8b, g->reg8b);
 		}
 		break;
 		case MATROXFB_CID_TESTOUT:
 		{
 			unsigned char val 
-			  = maven_get_reg(&md->client,0x8d);
+			  = maven_get_reg(md->client, 0x8d);
 			if (p->value) val |= 0x10;
 			else          val &= ~0x10;
-			maven_set_reg(&md->client, 0x8d, val);
+			maven_set_reg(md->client, 0x8d, val);
 		}
 		break;
 		case MATROXFB_CID_DEFLICKER:
 		{
-		  maven_set_reg(&md->client, 0x93, maven_compute_deflicker(md));
+		  maven_set_reg(md->client, 0x93, maven_compute_deflicker(md));
 		}
 		break;
 	}
@@ -1189,6 +1187,7 @@ static int maven_init_client(struct i2c_client* clnt) {
 	MINFO_FROM(container_of(clnt->adapter, struct i2c_bit_adapter, adapter)->minfo);
 
 	md->primary_head = MINFO;
+	md->client = clnt;
 	down_write(&ACCESS_FBINFO(altout.lock));
 	ACCESS_FBINFO(outputs[1]).output = &maven_altout;
 	ACCESS_FBINFO(outputs[1]).src = ACCESS_FBINFO(outputs[1]).default_src;
@@ -1232,14 +1231,11 @@ static int maven_shutdown_client(struct i2c_client* clnt) {
 	return 0;
 }
 
-static const unsigned short normal_i2c[] = { MAVEN_I2CID, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver maven_driver;
-
-static int maven_detect_client(struct i2c_adapter* adapter, int address, int kind) {
-	int err = 0;
-	struct i2c_client* new_client;
+static int maven_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	int err = -ENODEV;
 	struct maven_data* data;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_WORD_DATA |
@@ -1250,50 +1246,37 @@ static int maven_detect_client(struct i2c_adapter* adapter, int address, int kin
 		err = -ENOMEM;
 		goto ERROR0;
 	}
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &maven_driver;
-	new_client->flags = 0;
-	strlcpy(new_client->name, "maven", I2C_NAME_SIZE);
-	if ((err = i2c_attach_client(new_client)))
-		goto ERROR3;
-	err = maven_init_client(new_client);
+	i2c_set_clientdata(client, data);
+	err = maven_init_client(client);
 	if (err)
 		goto ERROR4;
 	return 0;
 ERROR4:;
-	i2c_detach_client(new_client);
-ERROR3:;
-	kfree(new_client);
+	kfree(data);
 ERROR0:;
 	return err;
 }
 
-static int maven_attach_adapter(struct i2c_adapter* adapter) {
-	if (adapter->id == I2C_HW_B_G400)
-		return i2c_probe(adapter, &addr_data, &maven_detect_client);
-	return 0;
-}
-
-static int maven_detach_client(struct i2c_client* client) {
-	int err;
-
-	if ((err = i2c_detach_client(client)))
-		return err;
+static int maven_remove(struct i2c_client *client)
+{
 	maven_shutdown_client(client);
 	kfree(i2c_get_clientdata(client));
 	return 0;
 }
 
+static const struct i2c_device_id maven_id[] = {
+	{ "maven", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, maven_id);
+
 static struct i2c_driver maven_driver={
 	.driver = {
 		.name	= "maven",
 	},
-	.id		= I2C_DRIVERID_MGATVO,
-	.attach_adapter	= maven_attach_adapter,
-	.detach_client	= maven_detach_client,
+	.probe		= maven_probe,
+	.remove		= maven_remove,
+	.id_table	= maven_id,
 };
 
 static int __init matroxfb_maven_init(void)
diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c
index 4d8ad9cd0e1..9dfcf39d336 100644
--- a/drivers/video/omap/blizzard.c
+++ b/drivers/video/omap/blizzard.c
@@ -26,9 +26,9 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/blizzard.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
+#include <mach/blizzard.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index ab77c51fe9d..6efcf89e7fb 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -25,9 +25,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
+#include <mach/board.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 1e642b7a20f..f24df0b54e1 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -26,9 +26,9 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/hwa742.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
+#include <mach/hwa742.h>
 
 #define HWA742_REV_CODE_REG       0x0
 #define HWA742_CONFIG_REG         0x2
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 31e978349a8..2486237ebba 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/tps65010.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c
index fd6f0eb16de..88c19d424ef 100644
--- a/drivers/video/omap/lcd_h4.c
+++ b/drivers/video/omap/lcd_h4.c
@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
 
 static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
index 551f385861d..6953ed4b582 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/omapfb.h>
+#include <mach/fpga.h>
+#include <mach/omapfb.h>
 
 static int innovator1510_panel_init(struct lcd_panel *panel,
 				    struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 5ef119c813e..6a42c6a0cd9 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -22,8 +22,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index a38038840fd..a4a725f427a 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -23,9 +23,9 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
 
 static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c
index 52bdfdac42c..218317366e6 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/omap/lcd_palmte.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/omapfb.h>
+#include <mach/fpga.h>
+#include <mach/omapfb.h>
 
 static int palmte_panel_init(struct lcd_panel *panel,
 				struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
index 4bb349f5435..57b0f6cf6a5 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -29,8 +29,8 @@ GPIO13 - screen blanking
 #include <linux/module.h>
 #include <linux/io.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
 
 static int palmtt_panel_init(struct lcd_panel *panel,
 	struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c
index ea6170ddff3..d33d78b1172 100644
--- a/drivers/video/omap/lcd_palmz71.c
+++ b/drivers/video/omap/lcd_palmz71.c
@@ -24,7 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
 
 static int palmz71_panel_init(struct lcd_panel *panel,
 			      struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
index c4f306a4e5c..caa6a896cb8 100644
--- a/drivers/video/omap/lcd_sx1.c
+++ b/drivers/video/omap/lcd_sx1.c
@@ -23,10 +23,10 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/mux.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
+#include <mach/mcbsp.h>
+#include <mach/mux.h>
 
 /*
  * OMAP310 GPIO registers
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index fb19ed4992d..83514f06671 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -29,8 +29,8 @@
 #include <linux/vmalloc.h>
 #include <linux/clk.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
 
 #include <asm/mach-types.h>
 
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index f85af5c4fa6..51a138bd113 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -28,9 +28,8 @@
 #include <linux/mm.h>
 #include <linux/uaccess.h>
 
-#include <asm/mach-types.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
 
 #define MODULE_NAME	"omapfb"
 
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index 789cfd23c36..4a6f13d3fac 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -27,7 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index fafd0f26b90..6359353c2c6 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -24,8 +24,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
 
 #include "lcdc.h"
 
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 3f1ca2adda3..c6dd924976a 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -1746,6 +1746,7 @@ static void __devexit pm2fb_remove(struct pci_dev *pdev)
 	release_mem_region(fix->mmio_start, fix->mmio_len);
 
 	pci_set_drvdata(pdev, NULL);
+	fb_dealloc_cmap(&info->cmap);
 	kfree(info->pixmap.addr);
 	kfree(info);
 }
diff --git a/drivers/video/pnx4008/dum.h b/drivers/video/pnx4008/dum.h
index d80a614d89e..1234d4375d9 100644
--- a/drivers/video/pnx4008/dum.h
+++ b/drivers/video/pnx4008/dum.h
@@ -12,7 +12,7 @@
 #ifndef __PNX008_DUM_H__
 #define __PNX008_DUM_H__
 
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 #define PNX4008_DUMCONF_VA_BASE		IO_ADDRESS(PNX4008_DUMCONF_BASE)
 #define PNX4008_DUM_MAIN_VA_BASE	IO_ADDRESS(PNX4008_DUM_MAINCFG_BASE)
diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c
index d23bf0d659b..2aa09bce394 100644
--- a/drivers/video/pnx4008/sdum.c
+++ b/drivers/video/pnx4008/sdum.c
@@ -30,7 +30,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <asm/uaccess.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include "sdum.h"
 #include "fbcommon.h"
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 8c863a7f654..0a0fd48a856 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -58,18 +58,18 @@
 
 #ifdef CONFIG_SH_DREAMCAST
 #include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
+#include <mach-dreamcast/mach/sysasic.h>
 #endif
 
 #ifdef CONFIG_SH_DMA
 #include <linux/pagemap.h>
-#include <asm/mach/dma.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 #endif
 
 #ifdef CONFIG_SH_STORE_QUEUES
 #include <linux/uaccess.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
 #endif
 
 #ifndef PCI_DEVICE_ID_NEC_NEON250
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 69de2fed6c5..97204497d9f 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -45,14 +45,14 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/bitfield.h>
+#include <mach/pxafb.h>
 
 /*
  * Complain if VAR is out of range.
@@ -1031,7 +1031,9 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi)
 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
 	pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
 	pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
-	pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+	if ((lccr0 & LCCR0_PAS) == 0)
+		pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
 }
 
 static void pxafb_enable_controller(struct pxafb_info *fbi)
@@ -1400,6 +1402,8 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
 	if (lcd_conn == LCD_MONO_STN_8BPP)
 		fbi->lccr0 |= LCCR0_DPD;
 
+	fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
 	fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
 	fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
 	fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
@@ -1673,53 +1677,63 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
 #define pxafb_setup_options()		(0)
 #endif
 
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
-	struct pxafb_info *fbi;
-	struct pxafb_mach_info *inf;
-	struct resource *r;
-	int irq, ret;
-
-	dev_dbg(&dev->dev, "pxafb_probe\n");
-
-	inf = dev->dev.platform_data;
-	ret = -ENOMEM;
-	fbi = NULL;
-	if (!inf)
-		goto failed;
-
-	ret = pxafb_parse_options(&dev->dev, g_options);
-	if (ret < 0)
-		goto failed;
-
 #ifdef DEBUG_VAR
-	/* Check for various illegal bit-combinations. Currently only
-	 * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+					  struct pxafb_mach_info *inf)
+{
+	if (inf->lcd_conn)
+		return;
 
 	if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
-		dev_warn(&dev->dev, "machine LCCR0 setting contains "
+		dev_warn(dev, "machine LCCR0 setting contains "
 				"illegal bits: %08x\n",
 			inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
 	if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
-		dev_warn(&dev->dev, "machine LCCR3 setting contains "
+		dev_warn(dev, "machine LCCR3 setting contains "
 				"illegal bits: %08x\n",
 			inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
 	if (inf->lccr0 & LCCR0_DPD &&
 	    ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
 	     (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
 	     (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
-		dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+		dev_warn(dev, "Double Pixel Data (DPD) mode is "
 				"only valid in passive mono"
 				" single panel mode\n");
 	if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
 	    (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
-		dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+		dev_warn(dev, "Dual panel only valid in passive mode\n");
 	if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
 	     (inf->modes->upper_margin || inf->modes->lower_margin))
-		dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+		dev_warn(dev, "Upper and lower margins must be 0 in "
 				"passive mode\n");
+}
+#else
+#define pxafb_check_options(...)	do {} while (0)
 #endif
 
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+	struct pxafb_info *fbi;
+	struct pxafb_mach_info *inf;
+	struct resource *r;
+	int irq, ret;
+
+	dev_dbg(&dev->dev, "pxafb_probe\n");
+
+	inf = dev->dev.platform_data;
+	ret = -ENOMEM;
+	fbi = NULL;
+	if (!inf)
+		goto failed;
+
+	ret = pxafb_parse_options(&dev->dev, g_options);
+	if (ret < 0)
+		goto failed;
+
+	pxafb_check_options(&dev->dev, inf);
+
 	dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
 			inf->modes->xres,
 			inf->modes->yres,
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index f0598961c6b..79cf0b1976a 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -29,9 +29,9 @@
 #include <asm/div64.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/fb.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/fb.h>
 
 #ifdef CONFIG_PM
 #include <linux/pm.h>
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index 2972f112dbe..4dcec48a1d7 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -11,7 +11,6 @@
  * which is based on the code of neofb.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -903,13 +902,13 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i
 	/* Prepare PCI device */
 	rc = pci_enable_device(dev);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot enable PCI device\n");
+		dev_err(info->device, "cannot enable PCI device\n");
 		goto err_enable_device;
 	}
 
 	rc = pci_request_regions(dev, "s3fb");
 	if (rc < 0) {
-		dev_err(info->dev, "cannot reserve framebuffer region\n");
+		dev_err(info->device, "cannot reserve framebuffer region\n");
 		goto err_request_regions;
 	}
 
@@ -921,7 +920,7 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i
 	info->screen_base = pci_iomap(dev, 0, 0);
 	if (! info->screen_base) {
 		rc = -ENOMEM;
-		dev_err(info->dev, "iomap for framebuffer failed\n");
+		dev_err(info->device, "iomap for framebuffer failed\n");
 		goto err_iomap;
 	}
 
@@ -965,19 +964,19 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i
 	rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
 	if (! ((rc == 1) || (rc == 2))) {
 		rc = -EINVAL;
-		dev_err(info->dev, "mode %s not found\n", mode_option);
+		dev_err(info->device, "mode %s not found\n", mode_option);
 		goto err_find_mode;
 	}
 
 	rc = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot allocate colormap\n");
+		dev_err(info->device, "cannot allocate colormap\n");
 		goto err_alloc_cmap;
 	}
 
 	rc = register_framebuffer(info);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot register framebuffer\n");
+		dev_err(info->device, "cannot register framebuffer\n");
 		goto err_reg_fb;
 	}
 
@@ -1053,7 +1052,7 @@ static int s3_pci_suspend(struct pci_dev* dev, pm_message_t state)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct s3fb_info *par = info->par;
 
-	dev_info(info->dev, "suspend\n");
+	dev_info(info->device, "suspend\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
@@ -1085,7 +1084,7 @@ static int s3_pci_resume(struct pci_dev* dev)
 	struct s3fb_info *par = info->par;
 	int err;
 
-	dev_info(info->dev, "resume\n");
+	dev_info(info->device, "resume\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
@@ -1102,7 +1101,7 @@ static int s3_pci_resume(struct pci_dev* dev)
 	if (err) {
 		mutex_unlock(&(par->open_lock));
 		release_console_sem();
-		dev_err(info->dev, "error %d enabling device for resume\n", err);
+		dev_err(info->device, "error %d enabling device for resume\n", err);
 		return err;
 	}
 	pci_set_master(dev);
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 78bcdbc3f48..c052bd4c0b0 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -177,11 +177,11 @@
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/shannon.h>
+#include <mach/assabet.h>
+#include <mach/shannon.h>
 
 /*
  * debugging?
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index f6ef6cca73c..4c32c06579a 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -595,6 +595,8 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 		info->fbops = &sh_mobile_lcdc_ops;
 		info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
 		info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
+		info->var.width = cfg->lcd_size_cfg.width;
+		info->var.height = cfg->lcd_size_cfg.height;
 		info->var.activate = FB_ACTIVATE_NOW;
 		error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp);
 		if (error)
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 77aafcfae03..4599a4385bc 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -95,7 +95,6 @@ static inline int mtrr_del(int reg, unsigned long base,
 #define VOODOO5_MAX_PIXCLOCK 350000
 
 static struct fb_fix_screeninfo tdfx_fix __devinitdata = {
-	.id =		"3Dfx",
 	.type =		FB_TYPE_PACKED_PIXELS,
 	.visual =	FB_VISUAL_PSEUDOCOLOR,
 	.ypanstep =	1,
@@ -426,7 +425,7 @@ static unsigned long do_lfb_size(struct tdfx_par *par, unsigned short dev_id)
 	if (dev_id < PCI_DEVICE_ID_3DFX_VOODOO5) {
 		/* Banshee/Voodoo3 */
 		chip_size = 2;
-		if (has_sgram && (draminit0 & DRAMINIT0_SGRAM_TYPE))
+		if (has_sgram && !(draminit0 & DRAMINIT0_SGRAM_TYPE))
 			chip_size = 1;
 	} else {
 		/* Voodoo4/5 */
@@ -1200,15 +1199,15 @@ static int __devinit tdfxfb_probe(struct pci_dev *pdev,
 	/* Configure the default fb_fix_screeninfo first */
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_3DFX_BANSHEE:
-		strcat(tdfx_fix.id, " Banshee");
+		strcpy(tdfx_fix.id, "3Dfx Banshee");
 		default_par->max_pixclock = BANSHEE_MAX_PIXCLOCK;
 		break;
 	case PCI_DEVICE_ID_3DFX_VOODOO3:
-		strcat(tdfx_fix.id, " Voodoo3");
+		strcpy(tdfx_fix.id, "3Dfx Voodoo3");
 		default_par->max_pixclock = VOODOO3_MAX_PIXCLOCK;
 		break;
 	case PCI_DEVICE_ID_3DFX_VOODOO5:
-		strcat(tdfx_fix.id, " Voodoo5");
+		strcpy(tdfx_fix.id, "3Dfx Voodoo5");
 		default_par->max_pixclock = VOODOO5_MAX_PIXCLOCK;
 		break;
 	}
diff --git a/drivers/video/vermilion/vermilion.h b/drivers/video/vermilion/vermilion.h
index c4aba59d480..7491abfcf1f 100644
--- a/drivers/video/vermilion/vermilion.h
+++ b/drivers/video/vermilion/vermilion.h
@@ -30,7 +30,6 @@
 #define _VERMILION_H_
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/pci.h>
 #include <asm/atomic.h>
 #include <linux/mutex.h>
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 536ab11623f..3df17dc8c3d 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -12,7 +12,6 @@
  * (http://davesdomain.org.uk/viafb/)
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -677,13 +676,13 @@ static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_devi
 
 	rc = pci_enable_device(dev);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot enable PCI device\n");
+		dev_err(info->device, "cannot enable PCI device\n");
 		goto err_enable_device;
 	}
 
 	rc = pci_request_regions(dev, "vt8623fb");
 	if (rc < 0) {
-		dev_err(info->dev, "cannot reserve framebuffer region\n");
+		dev_err(info->device, "cannot reserve framebuffer region\n");
 		goto err_request_regions;
 	}
 
@@ -696,14 +695,14 @@ static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_devi
 	info->screen_base = pci_iomap(dev, 0, 0);
 	if (! info->screen_base) {
 		rc = -ENOMEM;
-		dev_err(info->dev, "iomap for framebuffer failed\n");
+		dev_err(info->device, "iomap for framebuffer failed\n");
 		goto err_iomap_1;
 	}
 
 	par->mmio_base = pci_iomap(dev, 1, 0);
 	if (! par->mmio_base) {
 		rc = -ENOMEM;
-		dev_err(info->dev, "iomap for MMIO failed\n");
+		dev_err(info->device, "iomap for MMIO failed\n");
 		goto err_iomap_2;
 	}
 
@@ -714,7 +713,7 @@ static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_devi
 	if ((16 <= memsize1) && (memsize1 <= 64) && (memsize1 == memsize2))
 		info->screen_size = memsize1 << 20;
 	else {
-		dev_err(info->dev, "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
+		dev_err(info->device, "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
 		info->screen_size = 16 << 20;
 	}
 
@@ -731,19 +730,19 @@ static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_devi
 	rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
 	if (! ((rc == 1) || (rc == 2))) {
 		rc = -EINVAL;
-		dev_err(info->dev, "mode %s not found\n", mode_option);
+		dev_err(info->device, "mode %s not found\n", mode_option);
 		goto err_find_mode;
 	}
 
 	rc = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot allocate colormap\n");
+		dev_err(info->device, "cannot allocate colormap\n");
 		goto err_alloc_cmap;
 	}
 
 	rc = register_framebuffer(info);
 	if (rc < 0) {
-		dev_err(info->dev, "cannot register framebugger\n");
+		dev_err(info->device, "cannot register framebugger\n");
 		goto err_reg_fb;
 	}
 
@@ -817,7 +816,7 @@ static int vt8623_pci_suspend(struct pci_dev* dev, pm_message_t state)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct vt8623fb_info *par = info->par;
 
-	dev_info(info->dev, "suspend\n");
+	dev_info(info->device, "suspend\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
@@ -848,16 +847,13 @@ static int vt8623_pci_resume(struct pci_dev* dev)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct vt8623fb_info *par = info->par;
 
-	dev_info(info->dev, "resume\n");
+	dev_info(info->device, "resume\n");
 
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
 
-	if (par->ref_count == 0) {
-		mutex_unlock(&(par->open_lock));
-		release_console_sem();
-		return 0;
-	}
+	if (par->ref_count == 0)
+		goto fail;
 
 	pci_set_power_state(dev, PCI_D0);
 	pci_restore_state(dev);
@@ -870,8 +866,8 @@ static int vt8623_pci_resume(struct pci_dev* dev)
 	vt8623fb_set_par(info);
 	fb_set_suspend(info, 0);
 
-	mutex_unlock(&(par->open_lock));
 fail:
+	mutex_unlock(&(par->open_lock));
 	release_console_sem();
 
 	return 0;
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 7b3a8423f48..5da3d2423cc 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -24,7 +24,6 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index bfef604160d..62eab43152d 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -158,7 +158,7 @@ static inline s64 towards_target(struct virtio_balloon *vb)
 	vb->vdev->config->get(vb->vdev,
 			      offsetof(struct virtio_balloon_config, num_pages),
 			      &v, sizeof(v));
-	return v - vb->num_pages;
+	return (s64)v - vb->num_pages;
 }
 
 static void update_balloon_size(struct virtio_balloon *vb)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 48399e134c0..c5103671670 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -285,10 +285,11 @@ config ALIM1535_WDT
 
 config ALIM7101_WDT
 	tristate "ALi M7101 PMU Computer Watchdog"
-	depends on X86 && PCI
+	depends on PCI
 	help
 	  This is the driver for the hardware watchdog on the ALi M7101 PMU
-	  as used in the x86 Cobalt servers.
+	  as used in the x86 Cobalt servers and also found in some
+	  SPARC Netra servers too.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called alim7101_wdt.
@@ -463,7 +464,17 @@ config PC87413_WDT
 	  module will be called pc87413_wdt.
 
 	  Most people will say N.
- 
+
+config RDC321X_WDT
+	tristate "RDC R-321x SoC watchdog"
+	depends on X86_RDC321X
+	help
+	  This is the driver for the built in hardware watchdog
+	  in the RDC R-321x SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rdc321x_wdt.
+
 config 60XX_WDT
 	tristate "SBC-60XX Watchdog Timer"
 	depends on X86
@@ -632,6 +643,16 @@ config SBC_EPX_C3_WATCHDOG
 
 # MIPS Architecture
 
+config RC32434_WDT
+	tristate "IDT RC32434 SoC Watchdog Timer"
+	depends on MIKROTIK_RB532
+	help
+	  Hardware driver for the IDT RC32434 SoC built-in
+	  watchdog timer.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rc32434_wdt.
+
 config INDYDOG
 	tristate "Indy/I2 Hardware Watchdog"
 	depends on SGI_HAS_INDYDOG
@@ -691,13 +712,17 @@ config MPC5200_WDT
 	tristate "MPC5200 Watchdog Timer"
 	depends on PPC_MPC52xx
 
-config 8xx_WDT
-	tristate "MPC8xx Watchdog Timer"
-	depends on 8xx
+config 8xxx_WDT
+	tristate "MPC8xxx Platform Watchdog Timer"
+	depends on PPC_8xx || PPC_83xx || PPC_86xx
+	help
+	  This driver is for a SoC level watchdog that exists on some
+	  Freescale PowerPC processors. So far this driver supports:
+	  - MPC8xx watchdogs
+	  - MPC83xx watchdogs
+	  - MPC86xx watchdogs
 
-config 83xx_WDT
-	tristate "MPC83xx Watchdog Timer"
-	depends on PPC_83xx
+	  For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
 
 config MV64X60_WDT
 	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index edd305a64e6..e0ef123fbde 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -66,12 +66,16 @@ obj-$(CONFIG_IB700_WDT) += ib700wdt.o
 obj-$(CONFIG_IBMASR) += ibmasr.o
 obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
 obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
-obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
+obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
+ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
+obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
+endif
 obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
 obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
 obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
 obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
 obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
+obj-$(CONFIG_RDC321X_WDT) += rdc321x_wdt.o
 obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
 obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
 obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o
@@ -91,8 +95,9 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
 # M68KNOMMU Architecture
 
 # MIPS Architecture
+obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
 obj-$(CONFIG_INDYDOG) += indydog.o
-obj-$(CONFIG_WDT_MTX1)	+= mtx-1_wdt.o
+obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
 obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
 obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
 obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
@@ -101,9 +106,8 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
 # PARISC Architecture
 
 # POWERPC Architecture
-obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
 obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o
-obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o
+obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
 obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
 obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
 
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 85269c365a1..6e46a551395 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -58,39 +58,45 @@
 #include <linux/types.h>		/* For standard types (like size_t) */
 #include <linux/errno.h>		/* For the -ENODEV/... values */
 #include <linux/kernel.h>		/* For printk/panic/... */
-#include <linux/miscdevice.h>		/* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
+#include <linux/miscdevice.h>		/* For MODULE_ALIAS_MISCDEV
+							(WATCHDOG_MINOR) */
 #include <linux/watchdog.h>		/* For the watchdog specific items */
 #include <linux/fs.h>			/* For file operations */
 #include <linux/ioport.h>		/* For io-port access */
 #include <linux/platform_device.h>	/* For platform_driver framework */
 #include <linux/init.h>			/* For __init/__exit/... */
-
-#include <asm/uaccess.h>		/* For copy_to_user/put_user/... */
-#include <asm/io.h>			/* For inb/outb/... */
+#include <linux/uaccess.h>		/* For copy_to_user/put_user/... */
+#include <linux/io.h>			/* For inb/outb/... */
 
 /* Module information */
 #define DRV_NAME "acquirewdt"
 #define PFX DRV_NAME ": "
 #define WATCHDOG_NAME "Acquire WDT"
-#define WATCHDOG_HEARTBEAT 0	/* There is no way to see what the correct time-out period is */
+/* There is no way to see what the correct time-out period is */
+#define WATCHDOG_HEARTBEAT 0
 
 /* internal variables */
-static struct platform_device *acq_platform_device;	/* the watchdog platform device */
+/* the watchdog platform device */
+static struct platform_device *acq_platform_device;
 static unsigned long acq_is_open;
 static char expect_close;
 
 /* module parameters */
-static int wdt_stop = 0x43;	/* You must set this - there is no sane way to probe for this board. */
+/* You must set this - there is no sane way to probe for this board. */
+static int wdt_stop = 0x43;
 module_param(wdt_stop, int, 0);
 MODULE_PARM_DESC(wdt_stop, "Acquire WDT 'stop' io port (default 0x43)");
 
-static int wdt_start = 0x443;	/* You must set this - there is no sane way to probe for this board. */
+/* You must set this - there is no sane way to probe for this board. */
+static int wdt_start = 0x443;
 module_param(wdt_start, int, 0);
 MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Watchdog Operations
@@ -112,18 +118,18 @@ static void acq_stop(void)
  *	/dev/watchdog handling
  */
 
-static ssize_t acq_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t acq_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count) {
+	if (count) {
 		if (!nowayout) {
 			size_t i;
-
 			/* note: just in case someone wrote the magic character
-			 * five months ago... */
+			   five months ago... */
 			expect_close = 0;
-
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the
+			   magic character */
 			for (i = 0; i != count; i++) {
 				char c;
 				if (get_user(c, buf + i))
@@ -132,64 +138,55 @@ static ssize_t acq_write(struct file *file, const char __user *buf, size_t count
 					expect_close = 42;
 			}
 		}
-
-		/* Well, anyhow someone wrote to us, we should return that favour */
+		/* Well, anyhow someone wrote to us, we should
+				return that favour */
 		acq_keepalive();
 	}
 	return count;
 }
 
-static int acq_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int options, retval = -EINVAL;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident =
-	{
+	static struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = WATCHDOG_NAME,
 	};
 
-	switch(cmd)
-	{
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-	  return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
 
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-	  return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-	  acq_keepalive();
-	  return 0;
-
-	case WDIOC_GETTIMEOUT:
-	  return put_user(WATCHDOG_HEARTBEAT, p);
+		return put_user(0, p);
 
 	case WDIOC_SETOPTIONS:
 	{
-	    if (get_user(options, p))
-	      return -EFAULT;
-
-	    if (options & WDIOS_DISABLECARD)
-	    {
-	      acq_stop();
-	      retval = 0;
-	    }
-
-	    if (options & WDIOS_ENABLECARD)
-	    {
-	      acq_keepalive();
-	      retval = 0;
-	    }
-
-	    return retval;
+		if (get_user(options, p))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			acq_stop();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			acq_keepalive();
+			retval = 0;
+		}
+		return retval;
 	}
+	case WDIOC_KEEPALIVE:
+		acq_keepalive();
+		return 0;
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(WATCHDOG_HEARTBEAT, p);
 
 	default:
-	  return -ENOTTY;
+		return -ENOTTY;
 	}
 }
 
@@ -211,7 +208,8 @@ static int acq_close(struct inode *inode, struct file *file)
 	if (expect_close == 42) {
 		acq_stop();
 	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		acq_keepalive();
 	}
 	clear_bit(0, &acq_is_open);
@@ -227,7 +225,7 @@ static const struct file_operations acq_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= acq_write,
-	.ioctl		= acq_ioctl,
+	.unlocked_ioctl	= acq_ioctl,
 	.open		= acq_open,
 	.release	= acq_close,
 };
@@ -248,32 +246,29 @@ static int __devinit acq_probe(struct platform_device *dev)
 
 	if (wdt_stop != wdt_start) {
 		if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) {
-			printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
-				wdt_stop);
+			printk(KERN_ERR PFX
+			    "I/O address 0x%04x already in use\n", wdt_stop);
 			ret = -EIO;
 			goto out;
 		}
 	}
 
 	if (!request_region(wdt_start, 1, WATCHDOG_NAME)) {
-		printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			wdt_start);
 		ret = -EIO;
 		goto unreg_stop;
 	}
-
 	ret = misc_register(&acq_miscdev);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto unreg_regions;
 	}
-
-	printk (KERN_INFO PFX "initialized. (nowayout=%d)\n",
-		nowayout);
+	printk(KERN_INFO PFX "initialized. (nowayout=%d)\n", nowayout);
 
 	return 0;
-
 unreg_regions:
 	release_region(wdt_start, 1);
 unreg_stop:
@@ -286,9 +281,9 @@ out:
 static int __devexit acq_remove(struct platform_device *dev)
 {
 	misc_deregister(&acq_miscdev);
-	release_region(wdt_start,1);
-	if(wdt_stop != wdt_start)
-		release_region(wdt_stop,1);
+	release_region(wdt_start, 1);
+	if (wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
 
 	return 0;
 }
@@ -313,18 +308,19 @@ static int __init acq_init(void)
 {
 	int err;
 
-	printk(KERN_INFO "WDT driver for Acquire single board computer initialising.\n");
+	printk(KERN_INFO
+	      "WDT driver for Acquire single board computer initialising.\n");
 
 	err = platform_driver_register(&acquirewdt_driver);
 	if (err)
 		return err;
 
-	acq_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+	acq_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(acq_platform_device)) {
 		err = PTR_ERR(acq_platform_device);
 		goto unreg_platform_driver;
 	}
-
 	return 0;
 
 unreg_platform_driver:
diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c
index 8121cc24734..a5110f93a75 100644
--- a/drivers/watchdog/advantechwdt.c
+++ b/drivers/watchdog/advantechwdt.c
@@ -37,9 +37,9 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define DRV_NAME "advantechwdt"
@@ -47,7 +47,8 @@
 #define WATCHDOG_NAME "Advantech WDT"
 #define WATCHDOG_TIMEOUT 60		/* 60 sec default timeout */
 
-static struct platform_device *advwdt_platform_device;	/* the watchdog platform device */
+/* the watchdog platform device */
+static struct platform_device *advwdt_platform_device;
 static unsigned long advwdt_is_open;
 static char adv_expect_close;
 
@@ -72,35 +73,35 @@ MODULE_PARM_DESC(wdt_start, "Advantech WDT 'start' io port (default 0x443)");
 
 static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 1<= timeout <=63, default="
+		__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Watchdog Operations
  */
 
-static void
-advwdt_ping(void)
+static void advwdt_ping(void)
 {
 	/* Write a watchdog value */
 	outb_p(timeout, wdt_start);
 }
 
-static void
-advwdt_disable(void)
+static void advwdt_disable(void)
 {
 	inb_p(wdt_stop);
 }
 
-static int
-advwdt_set_heartbeat(int t)
+static int advwdt_set_heartbeat(int t)
 {
-	if ((t < 1) || (t > 63))
+	if (t < 1 || t > 63)
 		return -EINVAL;
-
 	timeout = t;
 	return 0;
 }
@@ -109,8 +110,8 @@ advwdt_set_heartbeat(int t)
  *	/dev/watchdog handling
  */
 
-static ssize_t
-advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t advwdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -120,7 +121,7 @@ advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *pp
 
 			for (i = 0; i != count; i++) {
 				char c;
-				if (get_user(c, buf+i))
+				if (get_user(c, buf + i))
 					return -EFAULT;
 				if (c == 'V')
 					adv_expect_close = 42;
@@ -131,9 +132,7 @@ advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *pp
 	return count;
 }
 
-static int
-advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg)
+static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
@@ -146,57 +145,50 @@ advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-	  if (copy_to_user(argp, &ident, sizeof(ident)))
-	    return -EFAULT;
-	  break;
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
 
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-	  return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-	  advwdt_ping();
-	  break;
-
-	case WDIOC_SETTIMEOUT:
-	  if (get_user(new_timeout, p))
-		  return -EFAULT;
-	  if (advwdt_set_heartbeat(new_timeout))
-		  return -EINVAL;
-	  advwdt_ping();
-	  /* Fall */
-
-	case WDIOC_GETTIMEOUT:
-	  return put_user(timeout, p);
+		return put_user(0, p);
 
 	case WDIOC_SETOPTIONS:
 	{
-	  int options, retval = -EINVAL;
-
-	  if (get_user(options, p))
-	    return -EFAULT;
-
-	  if (options & WDIOS_DISABLECARD) {
-	    advwdt_disable();
-	    retval = 0;
-	  }
+		int options, retval = -EINVAL;
 
-	  if (options & WDIOS_ENABLECARD) {
-	    advwdt_ping();
-	    retval = 0;
-	  }
-
-	  return retval;
+		if (get_user(options, p))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			advwdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			advwdt_ping();
+			retval = 0;
+		}
+		return retval;
 	}
+	case WDIOC_KEEPALIVE:
+		advwdt_ping();
+		break;
 
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (advwdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+		advwdt_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
 	default:
-	  return -ENOTTY;
+		return -ENOTTY;
 	}
 	return 0;
 }
 
-static int
-advwdt_open(struct inode *inode, struct file *file)
+static int advwdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(0, &advwdt_is_open))
 		return -EBUSY;
@@ -208,13 +200,13 @@ advwdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int
-advwdt_close(struct inode *inode, struct file *file)
+static int advwdt_close(struct inode *inode, struct file *file)
 {
 	if (adv_expect_close == 42) {
 		advwdt_disable();
 	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+				"Unexpected close, not stopping watchdog!\n");
 		advwdt_ping();
 	}
 	clear_bit(0, &advwdt_is_open);
@@ -230,7 +222,7 @@ static const struct file_operations advwdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= advwdt_write,
-	.ioctl		= advwdt_ioctl,
+	.unlocked_ioctl	= advwdt_ioctl,
 	.open		= advwdt_open,
 	.release	= advwdt_close,
 };
@@ -245,23 +237,24 @@ static struct miscdevice advwdt_miscdev = {
  *	Init & exit routines
  */
 
-static int __devinit
-advwdt_probe(struct platform_device *dev)
+static int __devinit advwdt_probe(struct platform_device *dev)
 {
 	int ret;
 
 	if (wdt_stop != wdt_start) {
 		if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) {
-			printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
-				wdt_stop);
+			printk(KERN_ERR PFX
+				"I/O address 0x%04x already in use\n",
+								wdt_stop);
 			ret = -EIO;
 			goto out;
 		}
 	}
 
 	if (!request_region(wdt_start, 1, WATCHDOG_NAME)) {
-		printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
-			wdt_start);
+		printk(KERN_ERR PFX
+				"I/O address 0x%04x already in use\n",
+								wdt_start);
 		ret = -EIO;
 		goto unreg_stop;
 	}
@@ -269,20 +262,19 @@ advwdt_probe(struct platform_device *dev)
 	/* Check that the heartbeat value is within it's range ; if not reset to the default */
 	if (advwdt_set_heartbeat(timeout)) {
 		advwdt_set_heartbeat(WATCHDOG_TIMEOUT);
-		printk (KERN_INFO PFX "timeout value must be 1<=x<=63, using %d\n",
-			timeout);
+		printk(KERN_INFO PFX
+			"timeout value must be 1<=x<=63, using %d\n", timeout);
 	}
 
 	ret = misc_register(&advwdt_miscdev);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto unreg_regions;
 	}
-
-	printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
+	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
-
 out:
 	return ret;
 unreg_regions:
@@ -293,19 +285,17 @@ unreg_stop:
 	goto out;
 }
 
-static int __devexit
-advwdt_remove(struct platform_device *dev)
+static int __devexit advwdt_remove(struct platform_device *dev)
 {
 	misc_deregister(&advwdt_miscdev);
-	release_region(wdt_start,1);
-	if(wdt_stop != wdt_start)
-		release_region(wdt_stop,1);
+	release_region(wdt_start, 1);
+	if (wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
 
 	return 0;
 }
 
-static void
-advwdt_shutdown(struct platform_device *dev)
+static void advwdt_shutdown(struct platform_device *dev)
 {
 	/* Turn the WDT off if we have a soft shutdown */
 	advwdt_disable();
@@ -321,18 +311,19 @@ static struct platform_driver advwdt_driver = {
 	},
 };
 
-static int __init
-advwdt_init(void)
+static int __init advwdt_init(void)
 {
 	int err;
 
-	printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n");
+	printk(KERN_INFO
+	     "WDT driver for Advantech single board computer initialising.\n");
 
 	err = platform_driver_register(&advwdt_driver);
 	if (err)
 		return err;
 
-	advwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+	advwdt_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(advwdt_platform_device)) {
 		err = PTR_ERR(advwdt_platform_device);
 		goto unreg_platform_driver;
@@ -345,8 +336,7 @@ unreg_platform_driver:
 	return err;
 }
 
-static void __exit
-advwdt_exit(void)
+static void __exit advwdt_exit(void)
 {
 	platform_device_unregister(advwdt_platform_device);
 	platform_driver_unregister(&advwdt_driver);
diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c
index 2b1fbdb2fcf..2a7690ecf97 100644
--- a/drivers/watchdog/alim1535_wdt.c
+++ b/drivers/watchdog/alim1535_wdt.c
@@ -18,9 +18,8 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/pci.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #define WATCHDOG_NAME "ALi_M1535"
 #define PFX WATCHDOG_NAME ": "
@@ -30,17 +29,21 @@
 static unsigned long ali_is_open;
 static char ali_expect_release;
 static struct pci_dev *ali_pci;
-static u32 ali_timeout_bits;	/* stores the computed timeout */
+static u32 ali_timeout_bits;		/* stores the computed timeout */
 static DEFINE_SPINLOCK(ali_lock);	/* Guards the hardware */
 
 /* module parameters */
 static int timeout = WATCHDOG_TIMEOUT;
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (0<timeout<18000, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. (0 < timeout < 18000, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	ali_start	-	start watchdog countdown
@@ -103,15 +106,16 @@ static void ali_keepalive(void)
 
 static int ali_settimer(int t)
 {
-	if(t < 0)
+	if (t < 0)
 		return -EINVAL;
-	else if(t < 60)
+	else if (t < 60)
 		ali_timeout_bits = t|(1<<6);
-	else if(t < 3600)
+	else if (t < 3600)
 		ali_timeout_bits = (t/60)|(1<<7);
-	else if(t < 18000)
+	else if (t < 18000)
 		ali_timeout_bits = (t/300)|(1<<6)|(1<<7);
-	else return -EINVAL;
+	else
+		return -EINVAL;
 
 	timeout = t;
 	return 0;
@@ -134,21 +138,22 @@ static int ali_settimer(int t)
  */
 
 static ssize_t ali_write(struct file *file, const char __user *data,
-			      size_t len, loff_t * ppos)
+			      size_t len, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
 	if (len) {
 		if (!nowayout) {
 			size_t i;
 
-			/* note: just in case someone wrote the magic character
-			 * five months ago... */
+			/* note: just in case someone wrote the
+			   magic character five months ago... */
 			ali_expect_release = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got
+			   the magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if(get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					ali_expect_release = 42;
@@ -163,7 +168,6 @@ static ssize_t ali_write(struct file *file, const char __user *data,
 
 /*
  *	ali_ioctl	-	handle watchdog ioctls
- *	@inode: VFS inode
  *	@file: VFS file pointer
  *	@cmd: ioctl number
  *	@arg: arguments to the ioctl
@@ -172,8 +176,7 @@ static ssize_t ali_write(struct file *file, const char __user *data,
  *	we want an extension to enable irq ack monitoring and the like
  */
 
-static int ali_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
+static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -186,57 +189,45 @@ static int ali_ioctl(struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-				sizeof (ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_KEEPALIVE:
-			ali_keepalive();
-			return 0;
-
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if (get_user (new_options, p))
-				return -EFAULT;
-
-			if (new_options & WDIOS_DISABLECARD) {
-				ali_stop();
-				retval = 0;
-			}
-
-			if (new_options & WDIOS_ENABLECARD) {
-				ali_start();
-				retval = 0;
-			}
-
-			return retval;
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			ali_stop();
+			retval = 0;
 		}
-
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_timeout;
-
-			if (get_user(new_timeout, p))
-				return -EFAULT;
-
-			if (ali_settimer(new_timeout))
-			    return -EINVAL;
-
-			ali_keepalive();
-			/* Fall */
+		if (new_options & WDIOS_ENABLECARD) {
+			ali_start();
+			retval = 0;
 		}
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
-
-		default:
-			return -ENOTTY;
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		ali_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (ali_settimer(new_timeout))
+			return -EINVAL;
+		ali_keepalive();
+		/* Fall */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -274,10 +265,11 @@ static int ali_release(struct inode *inode, struct file *file)
 	/*
 	 *      Shut off the timer.
 	 */
-	if (ali_expect_release == 42) {
+	if (ali_expect_release == 42)
 		ali_stop();
-	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+				"Unexpected close, not stopping watchdog!\n");
 		ali_keepalive();
 	}
 	clear_bit(0, &ali_is_open);
@@ -292,13 +284,11 @@ static int ali_release(struct inode *inode, struct file *file)
  */
 
 
-static int ali_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int ali_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT) {
-		/* Turn the WDT off */
-		ali_stop();
-	}
-
+	if (code == SYS_DOWN || code == SYS_HALT)
+		ali_stop();		/* Turn the WDT off */
 	return NOTIFY_DONE;
 }
 
@@ -340,10 +330,10 @@ static int __init ali_find_watchdog(void)
 
 	/* Check for the a 7101 PMU */
 	pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
-	if(pdev == NULL)
+	if (pdev == NULL)
 		return -ENODEV;
 
-	if(pci_enable_device(pdev)) {
+	if (pci_enable_device(pdev)) {
 		pci_dev_put(pdev);
 		return -EIO;
 	}
@@ -355,9 +345,12 @@ static int __init ali_find_watchdog(void)
 	 */
 	pci_read_config_dword(pdev, 0xCC, &wdog);
 
-	wdog &= ~0x3F;		/* Timer bits */
-	wdog &= ~((1<<27)|(1<<26)|(1<<25)|(1<<24));	/* Issued events */
-	wdog &= ~((1<<16)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9));	/* No monitor bits */
+	/* Timer bits */
+	wdog &= ~0x3F;
+	/* Issued events */
+	wdog &= ~((1<<27)|(1<<26)|(1<<25)|(1<<24));
+	/* No monitor bits */
+	wdog &= ~((1<<16)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9));
 
 	pci_write_config_dword(pdev, 0xCC, wdog);
 
@@ -369,12 +362,12 @@ static int __init ali_find_watchdog(void)
  */
 
 static const struct file_operations ali_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.write =	ali_write,
-	.ioctl =	ali_ioctl,
-	.open =		ali_open,
-	.release =	ali_release,
+	.owner 		=	THIS_MODULE,
+	.llseek 	=	no_llseek,
+	.write		=	ali_write,
+	.unlocked_ioctl =	ali_ioctl,
+	.open 		=	ali_open,
+	.release 	=	ali_release,
 };
 
 static struct miscdevice ali_miscdev = {
@@ -399,15 +392,16 @@ static int __init watchdog_init(void)
 	int ret;
 
 	/* Check whether or not the hardware watchdog is there */
-	if (ali_find_watchdog() != 0) {
+	if (ali_find_watchdog() != 0)
 		return -ENODEV;
-	}
 
-	/* Check that the timeout value is within it's range ; if not reset to the default */
+	/* Check that the timeout value is within it's range;
+	   if not reset to the default */
 	if (timeout < 1 || timeout >= 18000) {
 		timeout = WATCHDOG_TIMEOUT;
-		printk(KERN_INFO PFX "timeout value must be 0<timeout<18000, using %d\n",
-			timeout);
+		printk(KERN_INFO PFX
+		     "timeout value must be 0 < timeout < 18000, using %d\n",
+							timeout);
 	}
 
 	/* Calculate the watchdog's timeout */
@@ -415,15 +409,16 @@ static int __init watchdog_init(void)
 
 	ret = register_reboot_notifier(&ali_notifier);
 	if (ret != 0) {
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		goto out;
 	}
 
 	ret = misc_register(&ali_miscdev);
 	if (ret != 0) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						WATCHDOG_MINOR, ret);
 		goto unreg_reboot;
 	}
 
diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c
index 238273c9865..a045ef86943 100644
--- a/drivers/watchdog/alim7101_wdt.c
+++ b/drivers/watchdog/alim7101_wdt.c
@@ -31,9 +31,9 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define OUR_NAME "alim7101_wdt"
@@ -60,13 +60,17 @@
  */
 
 #define WATCHDOG_TIMEOUT 30            /* 30 sec default timeout */
-static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
-static int use_gpio = 0; /* Use the pic (for a1d revision alim7101) */
+static int use_gpio; /* Use the pic (for a1d revision alim7101) */
 module_param(use_gpio, int, 0);
-MODULE_PARM_DESC(use_gpio, "Use the gpio watchdog.  (required by old cobalt boards)");
+MODULE_PARM_DESC(use_gpio,
+		"Use the gpio watchdog (required by old cobalt boards).");
 
 static void wdt_timer_ping(unsigned long);
 static DEFINE_TIMER(timer, wdt_timer_ping, 0, 1);
@@ -77,8 +81,9 @@ static struct pci_dev *alim7101_pmu;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Whack the dog
@@ -89,23 +94,26 @@ static void wdt_timer_ping(unsigned long data)
 	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
 	 * we agree to ping the WDT
 	 */
-	char	tmp;
+	char tmp;
 
-	if(time_before(jiffies, next_heartbeat))
-	{
+	if (time_before(jiffies, next_heartbeat)) {
 		/* Ping the WDT (this is actually a disarm/arm sequence) */
 		pci_read_config_byte(alim7101_pmu, 0x92, &tmp);
-		pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
-		pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM));
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp | ALI_WDT_ARM));
 		if (use_gpio) {
-			pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp);
-			pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp
-					| 0x20);
-			pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp
-					& ~0x20);
+			pci_read_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, &tmp);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp | 0x20);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp & ~0x20);
 		}
 	} else {
-		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
+		printk(KERN_WARNING PFX
+			"Heartbeat lost! Will not ping the watchdog\n");
 	}
 	/* Re-set the timer interval */
 	mod_timer(&timer, jiffies + WDT_INTERVAL);
@@ -117,21 +125,27 @@ static void wdt_timer_ping(unsigned long data)
 
 static void wdt_change(int writeval)
 {
-	char	tmp;
+	char tmp;
 
 	pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp);
 	if (writeval == WDT_ENABLE) {
-		pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM));
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp | ALI_WDT_ARM));
 		if (use_gpio) {
-			pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp);
-			pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp & ~0x20);
+			pci_read_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, &tmp);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp & ~0x20);
 		}
 
 	} else {
-		pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
 		if (use_gpio) {
-			pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp);
-			pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp | 0x20);
+			pci_read_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, &tmp);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp | 0x20);
 		}
 	}
 }
@@ -169,10 +183,11 @@ static void wdt_keepalive(void)
  * /dev/watchdog handling
  */
 
-static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos)
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count) {
+	if (count) {
 		if (!nowayout) {
 			size_t ofs;
 
@@ -183,7 +198,7 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou
 			/* now scan */
 			for (ofs = 0; ofs != count; ofs++) {
 				char c;
-				if (get_user(c, buf+ofs))
+				if (get_user(c, buf + ofs))
 					return -EFAULT;
 				if (c == 'V')
 					wdt_expect_close = 42;
@@ -195,119 +210,116 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou
 	return count;
 }
 
-static int fop_open(struct inode * inode, struct file * file)
+static int fop_open(struct inode *inode, struct file *file)
 {
 	/* Just in case we're already talking to someone... */
-	if(test_and_set_bit(0, &wdt_is_open))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 	/* Good, fire up the show */
 	wdt_startup();
 	return nonseekable_open(inode, file);
 }
 
-static int fop_close(struct inode * inode, struct file * file)
+static int fop_close(struct inode *inode, struct file *file)
 {
-	if(wdt_expect_close == 42)
+	if (wdt_expect_close == 42)
 		wdt_turnoff();
 	else {
 		/* wim: shouldn't there be a: del_timer(&timer); */
-		printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n");
+		printk(KERN_CRIT PFX
+		  "device file closed unexpectedly. Will not stop the WDT!\n");
 	}
 	clear_bit(0, &wdt_is_open);
 	wdt_expect_close = 0;
 	return 0;
 }
 
-static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident =
-	{
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "ALiM7101",
 	};
 
-	switch(cmd)
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
 	{
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdt_keepalive();
-			return 0;
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if(get_user(new_options, p))
-				return -EFAULT;
-
-			if(new_options & WDIOS_DISABLECARD) {
-				wdt_turnoff();
-				retval = 0;
-			}
+		int new_options, retval = -EINVAL;
 
-			if(new_options & WDIOS_ENABLECARD) {
-				wdt_startup();
-				retval = 0;
-			}
-
-			return retval;
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
 		}
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_timeout;
-
-			if(get_user(new_timeout, p))
-				return -EFAULT;
-
-			if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */
-				return -EINVAL;
-
-			timeout = new_timeout;
-			wdt_keepalive();
-			/* Fall through */
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
 		}
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
-		default:
-			return -ENOTTY;
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		/* arbitrary upper limit */
+		if (new_timeout < 1 || new_timeout > 3600)
+			return -EINVAL;
+		timeout = new_timeout;
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
 static const struct file_operations wdt_fops = {
-	.owner=		THIS_MODULE,
-	.llseek=	no_llseek,
-	.write=		fop_write,
-	.open=		fop_open,
-	.release=	fop_close,
-	.ioctl=		fop_ioctl,
+	.owner		=	THIS_MODULE,
+	.llseek		=	no_llseek,
+	.write		=	fop_write,
+	.open		=	fop_open,
+	.release	=	fop_close,
+	.unlocked_ioctl	=	fop_ioctl,
 };
 
 static struct miscdevice wdt_miscdev = {
-	.minor=WATCHDOG_MINOR,
-	.name="watchdog",
-	.fops=&wdt_fops,
+	.minor	=	WATCHDOG_MINOR,
+	.name	=	"watchdog",
+	.fops	=	&wdt_fops,
 };
 
 /*
  *	Notifier for system down
  */
 
-static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_turnoff();
 
-	if (code==SYS_RESTART) {
+	if (code == SYS_RESTART) {
 		/*
-		 * Cobalt devices have no way of rebooting themselves other than
-		 * getting the watchdog to pull reset, so we restart the watchdog on
-		 * reboot with no heartbeat
+		 * Cobalt devices have no way of rebooting themselves other
+		 * than getting the watchdog to pull reset, so we restart the
+		 * watchdog on reboot with no heartbeat
 		 */
 		wdt_change(WDT_ENABLE);
 		printk(KERN_INFO PFX "Watchdog timer is now enabled with no heartbeat - should reboot in ~1 second.\n");
@@ -320,8 +332,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void
  *	turn the timebomb registers off.
  */
 
-static struct notifier_block wdt_notifier=
-{
+static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
@@ -354,7 +365,8 @@ static int __init alim7101_wdt_init(void)
 	ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
 		NULL);
 	if (!ali1543_south) {
-		printk(KERN_INFO PFX "ALi 1543 South-Bridge not present - WDT not set\n");
+		printk(KERN_INFO PFX
+			"ALi 1543 South-Bridge not present - WDT not set\n");
 		goto err_out;
 	}
 	pci_read_config_byte(ali1543_south, 0x5e, &tmp);
@@ -363,24 +375,25 @@ static int __init alim7101_wdt_init(void)
 		if (!use_gpio) {
 			printk(KERN_INFO PFX "Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.\n");
 			goto err_out;
-		} 
+		}
 		nowayout = 1;
 	} else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) {
 		printk(KERN_INFO PFX "ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n");
 		goto err_out;
 	}
 
-	if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
-	{
+	if (timeout < 1 || timeout > 3600) {
+		/* arbitrary upper limit */
 		timeout = WATCHDOG_TIMEOUT;
-		printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n",
-			timeout);
+		printk(KERN_INFO PFX
+			"timeout value must be 1 <= x <= 3600, using %d\n",
+								timeout);
 	}
 
 	rc = register_reboot_notifier(&wdt_notifier);
 	if (rc) {
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out;
 	}
 
@@ -391,9 +404,8 @@ static int __init alim7101_wdt_init(void)
 		goto err_out_reboot;
 	}
 
-	if (nowayout) {
+	if (nowayout)
 		__module_get(THIS_MODULE);
-	}
 
 	printk(KERN_INFO PFX "WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 2eb48c0df32..55dcbfe2bb7 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -69,7 +69,8 @@ struct ar7_wdt {
 	u32 prescale;
 };
 
-static struct semaphore open_semaphore;
+static unsigned long wdt_is_open;
+static spinlock_t wdt_lock;
 static unsigned expect_close;
 
 /* XXX currently fixed, allows max margin ~68.72 secs */
@@ -154,8 +155,10 @@ static void ar7_wdt_update_margin(int new_margin)
 	u32 change;
 
 	change = new_margin * (ar7_vbus_freq() / prescale_value);
-	if (change < 1) change = 1;
-	if (change > 0xffff) change = 0xffff;
+	if (change < 1)
+		change = 1;
+	if (change > 0xffff)
+		change = 0xffff;
 	ar7_wdt_change(change);
 	margin = change * prescale_value / ar7_vbus_freq();
 	printk(KERN_INFO DRVNAME
@@ -179,7 +182,7 @@ static void ar7_wdt_disable_wdt(void)
 static int ar7_wdt_open(struct inode *inode, struct file *file)
 {
 	/* only allow one at a time */
-	if (down_trylock(&open_semaphore))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 	ar7_wdt_enable_wdt();
 	expect_close = 0;
@@ -195,9 +198,7 @@ static int ar7_wdt_release(struct inode *inode, struct file *file)
 		"will not disable the watchdog timer\n");
 	else if (!nowayout)
 		ar7_wdt_disable_wdt();
-
-	up(&open_semaphore);
-
+	clear_bit(0, &wdt_is_open);
 	return 0;
 }
 
@@ -212,7 +213,7 @@ static int ar7_wdt_notify_sys(struct notifier_block *this,
 }
 
 static struct notifier_block ar7_wdt_notifier = {
-	.notifier_call = ar7_wdt_notify_sys
+	.notifier_call = ar7_wdt_notify_sys,
 };
 
 static ssize_t ar7_wdt_write(struct file *file, const char *data,
@@ -222,12 +223,14 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data,
 	if (len) {
 		size_t i;
 
+		spin_lock(&wdt_lock);
 		ar7_wdt_kick(1);
+		spin_unlock(&wdt_lock);
 
 		expect_close = 0;
 		for (i = 0; i < len; ++i) {
 			char c;
-			if (get_user(c, data+i))
+			if (get_user(c, data + i))
 				return -EFAULT;
 			if (c == 'V')
 				expect_close = 1;
@@ -237,8 +240,8 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data,
 	return len;
 }
 
-static int ar7_wdt_ioctl(struct inode *inode, struct file *file,
-			 unsigned int cmd, unsigned long arg)
+static long ar7_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	static struct watchdog_info ident = {
 		.identity = LONGNAME,
@@ -248,8 +251,6 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file,
 	int new_margin;
 
 	switch (cmd) {
-	default:
-		return -ENOTTY;
 	case WDIOC_GETSUPPORT:
 		if (copy_to_user((struct watchdog_info *)arg, &ident,
 				sizeof(ident)))
@@ -269,20 +270,24 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file,
 		if (new_margin < 1)
 			return -EINVAL;
 
+		spin_lock(&wdt_lock);
 		ar7_wdt_update_margin(new_margin);
 		ar7_wdt_kick(1);
+		spin_unlock(&wdt_lock);
 
 	case WDIOC_GETTIMEOUT:
 		if (put_user(margin, (int *)arg))
 			return -EFAULT;
 		return 0;
+	default:
+		return -ENOTTY;
 	}
 }
 
 static const struct file_operations ar7_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.write		= ar7_wdt_write,
-	.ioctl		= ar7_wdt_ioctl,
+	.unlocked_ioctl	= ar7_wdt_ioctl,
 	.open		= ar7_wdt_open,
 	.release	= ar7_wdt_release,
 };
@@ -297,6 +302,8 @@ static int __init ar7_wdt_init(void)
 {
 	int rc;
 
+	spin_lock_init(&wdt_lock);
+
 	ar7_wdt_get_regs();
 
 	if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt),
@@ -312,8 +319,6 @@ static int __init ar7_wdt_init(void)
 	ar7_wdt_prescale(prescale_value);
 	ar7_wdt_update_margin(margin);
 
-	sema_init(&open_semaphore, 1);
-
 	rc = register_reboot_notifier(&ar7_wdt_notifier);
 	if (rc) {
 		printk(KERN_ERR DRVNAME
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index ae0fca5e874..e8ae638e580 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -212,8 +212,8 @@ static struct watchdog_info at32_wdt_info = {
 /*
  * Handle commands from user-space.
  */
-static int at32_wdt_ioctl(struct inode *inode, struct file *file,
-		unsigned int cmd, unsigned long arg)
+static long at32_wdt_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
@@ -221,27 +221,10 @@ static int at32_wdt_ioctl(struct inode *inode, struct file *file,
 	int __user *p = argp;
 
 	switch (cmd) {
-	case WDIOC_KEEPALIVE:
-		at32_wdt_pat();
-		ret = 0;
-		break;
 	case WDIOC_GETSUPPORT:
 		ret = copy_to_user(argp, &at32_wdt_info,
 				sizeof(at32_wdt_info)) ? -EFAULT : 0;
 		break;
-	case WDIOC_SETTIMEOUT:
-		ret = get_user(time, p);
-		if (ret)
-			break;
-		ret = at32_wdt_settimeout(time);
-		if (ret)
-			break;
-		/* Enable new time value */
-		at32_wdt_start();
-		/* fall through */
-	case WDIOC_GETTIMEOUT:
-		ret = put_user(wdt->timeout, p);
-		break;
 	case WDIOC_GETSTATUS:
 		ret = put_user(0, p);
 		break;
@@ -258,6 +241,23 @@ static int at32_wdt_ioctl(struct inode *inode, struct file *file,
 			at32_wdt_start();
 		ret = 0;
 		break;
+	case WDIOC_KEEPALIVE:
+		at32_wdt_pat();
+		ret = 0;
+		break;
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(time, p);
+		if (ret)
+			break;
+		ret = at32_wdt_settimeout(time);
+		if (ret)
+			break;
+		/* Enable new time value */
+		at32_wdt_start();
+		/* fall through */
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(wdt->timeout, p);
+		break;
 	}
 
 	return ret;
@@ -283,7 +283,7 @@ static ssize_t at32_wdt_write(struct file *file, const char __user *data,
 			 */
 			for (i = 0; i != len; i++) {
 				char c;
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_release = 42;
@@ -298,7 +298,7 @@ static ssize_t at32_wdt_write(struct file *file, const char __user *data,
 static const struct file_operations at32_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= at32_wdt_ioctl,
+	.unlocked_ioctl	= at32_wdt_ioctl,
 	.open		= at32_wdt_open,
 	.release	= at32_wdt_close,
 	.write		= at32_wdt_write,
@@ -391,7 +391,6 @@ static int __exit at32_wdt_remove(struct platform_device *pdev)
 		wdt = NULL;
 		platform_set_drvdata(pdev, NULL);
 	}
-
 	return 0;
 }
 
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 9ff9a956532..993e5f52afe 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -20,9 +20,8 @@
 #include <linux/platform_device.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
-#include <asm/uaccess.h>
-#include <asm/arch/at91_st.h>
-
+#include <linux/uaccess.h>
+#include <mach/at91_st.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
 #define WDT_MAX_TIME		256	/* seconds */
@@ -31,11 +30,14 @@ static int wdt_time = WDT_DEFAULT_TIME;
 static int nowayout = WATCHDOG_NOWAYOUT;
 
 module_param(wdt_time, int, 0);
-MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+				__MODULE_STRING(WDT_DEFAULT_TIME) ")");
 
 #ifdef CONFIG_WATCHDOG_NOWAYOUT
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 #endif
 
 
@@ -46,7 +48,7 @@ static unsigned long at91wdt_busy;
 /*
  * Disable the watchdog.
  */
-static void inline at91_wdt_stop(void)
+static inline void at91_wdt_stop(void)
 {
 	at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN);
 }
@@ -54,16 +56,17 @@ static void inline at91_wdt_stop(void)
 /*
  * Enable and reset the watchdog.
  */
-static void inline at91_wdt_start(void)
+static inline void at91_wdt_start(void)
 {
-	at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | (((65536 * wdt_time) >> 8) & AT91_ST_WDV));
+	at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+				(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
 	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /*
  * Reload the watchdog timer.  (ie, pat the watchdog)
  */
-static void inline at91_wdt_reload(void)
+static inline void at91_wdt_reload(void)
 {
 	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
 }
@@ -89,8 +92,9 @@ static int at91_wdt_open(struct inode *inode, struct file *file)
  */
 static int at91_wdt_close(struct inode *inode, struct file *file)
 {
+	/* Disable the watchdog when file is closed */
 	if (!nowayout)
-		at91_wdt_stop();	/* Disable the watchdog when file is closed */
+		at91_wdt_stop();
 
 	clear_bit(0, &at91wdt_busy);
 	return 0;
@@ -110,7 +114,8 @@ static int at91_wdt_settimeout(int new_time)
 	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
 		return -EINVAL;
 
-	/* Set new watchdog time. It will be used when at91_wdt_start() is called. */
+	/* Set new watchdog time. It will be used when
+	   at91_wdt_start() is called. */
 	wdt_time = new_time;
 	return 0;
 }
@@ -123,60 +128,52 @@ static struct watchdog_info at91_wdt_info = {
 /*
  * Handle commands from user-space.
  */
-static int at91_wdt_ioctl(struct inode *inode, struct file *file,
-		unsigned int cmd, unsigned long arg)
+static long at91_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_value;
 
-	switch(cmd) {
-		case WDIOC_KEEPALIVE:
-			at91_wdt_reload();	/* pat the watchdog */
-			return 0;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_value, p))
-				return -EFAULT;
-
-			if (at91_wdt_settimeout(new_value))
-				return -EINVAL;
-
-			/* Enable new time value */
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &at91_wdt_info,
+				sizeof(at91_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (new_value & WDIOS_DISABLECARD)
+			at91_wdt_stop();
+		if (new_value & WDIOS_ENABLECARD)
 			at91_wdt_start();
-
-			/* Return current value */
-			return put_user(wdt_time, p);
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(wdt_time, p);
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_SETOPTIONS:
-			if (get_user(new_value, p))
-				return -EFAULT;
-
-			if (new_value & WDIOS_DISABLECARD)
-				at91_wdt_stop();
-			if (new_value & WDIOS_ENABLECARD)
-				at91_wdt_start();
-			return 0;
-
-		default:
-			return -ENOTTY;
+		return 0;
+	case WDIOC_KEEPALIVE:
+		at91_wdt_reload();	/* pat the watchdog */
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (at91_wdt_settimeout(new_value))
+			return -EINVAL;
+		/* Enable new time value */
+		at91_wdt_start();
+		/* Return current value */
+		return put_user(wdt_time, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdt_time, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
 /*
  * Pat the watchdog whenever device is written to.
  */
-static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t at91_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	at91_wdt_reload();		/* pat the watchdog */
 	return len;
@@ -187,7 +184,7 @@ static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, l
 static const struct file_operations at91wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= at91_wdt_ioctl,
+	.unlocked_ioctl	= at91_wdt_ioctl,
 	.open		= at91_wdt_open,
 	.release	= at91_wdt_close,
 	.write		= at91_wdt_write,
@@ -211,7 +208,8 @@ static int __init at91wdt_probe(struct platform_device *pdev)
 	if (res)
 		return res;
 
-	printk("AT91 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : "");
+	printk(KERN_INFO "AT91 Watchdog Timer enabled (%d seconds%s)\n",
+				wdt_time, nowayout ? ", nowayout" : "");
 	return 0;
 }
 
@@ -243,7 +241,7 @@ static int at91wdt_resume(struct platform_device *pdev)
 {
 	if (at91wdt_busy)
 		at91_wdt_start();
-		return 0;
+	return 0;
 }
 
 #else
@@ -265,7 +263,8 @@ static struct platform_driver at91wdt_driver = {
 
 static int __init at91_wdt_init(void)
 {
-	/* Check that the heartbeat value is within range; if not reset to the default */
+	/* Check that the heartbeat value is within range;
+	   if not reset to the default */
 	if (at91_wdt_settimeout(wdt_time)) {
 		at91_wdt_settimeout(WDT_DEFAULT_TIME);
 		pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256, using %d\n", wdt_time);
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 03b3e3d91e7..31b42253054 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -24,8 +24,8 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/uaccess.h>
 #include <asm/blackfin.h>
-#include <asm/uaccess.h>
 
 #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
 #define stampit() stamp("here i am")
@@ -148,7 +148,8 @@ static int bfin_wdt_set_timeout(unsigned long t)
 		int run = bfin_wdt_running();
 		bfin_wdt_stop();
 		bfin_write_WDOG_CNT(cnt);
-		if (run) bfin_wdt_start();
+		if (run)
+			bfin_wdt_start();
 	}
 	spin_unlock_irqrestore(&bfin_wdt_spinlock, flags);
 
@@ -191,16 +192,15 @@ static int bfin_wdt_release(struct inode *inode, struct file *file)
 {
 	stampit();
 
-	if (expect_close == 42) {
+	if (expect_close == 42)
 		bfin_wdt_stop();
-	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		bfin_wdt_keepalive();
 	}
-
 	expect_close = 0;
 	clear_bit(0, &open_check);
-
 	return 0;
 }
 
@@ -214,7 +214,7 @@ static int bfin_wdt_release(struct inode *inode, struct file *file)
  *	Pings the watchdog on write.
  */
 static ssize_t bfin_wdt_write(struct file *file, const char __user *data,
-                              size_t len, loff_t *ppos)
+						size_t len, loff_t *ppos)
 {
 	stampit();
 
@@ -241,7 +241,6 @@ static ssize_t bfin_wdt_write(struct file *file, const char __user *data,
 
 /**
  *	bfin_wdt_ioctl - Query Device
- *	@inode: inode of device
  *	@file: file handle of device
  *	@cmd: watchdog command
  *	@arg: argument
@@ -249,8 +248,8 @@ static ssize_t bfin_wdt_write(struct file *file, const char __user *data,
  *	Query basic information from the device or ping it, as outlined by the
  *	watchdog API.
  */
-static int bfin_wdt_ioctl(struct inode *inode, struct file *file,
-                          unsigned int cmd, unsigned long arg)
+static long bfin_wdt_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -258,59 +257,49 @@ static int bfin_wdt_ioctl(struct inode *inode, struct file *file,
 	stampit();
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-
-		case WDIOC_GETSUPPORT:
-			if (copy_to_user(argp, &bfin_wdt_info, sizeof(bfin_wdt_info)))
-				return -EFAULT;
-			else
-				return 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p);
-
-		case WDIOC_KEEPALIVE:
-			bfin_wdt_keepalive();
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &bfin_wdt_info, sizeof(bfin_wdt_info)))
+			return -EFAULT;
+		else
 			return 0;
-
-		case WDIOC_SETTIMEOUT: {
-			int new_timeout;
-
-			if (get_user(new_timeout, p))
-				return -EFAULT;
-
-			if (bfin_wdt_set_timeout(new_timeout))
-				return -EINVAL;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p);
+	case WDIOC_SETOPTIONS: {
+		unsigned long flags;
+		int options, ret = -EINVAL;
+
+		if (get_user(options, p))
+			return -EFAULT;
+
+		spin_lock_irqsave(&bfin_wdt_spinlock, flags);
+		if (options & WDIOS_DISABLECARD) {
+			bfin_wdt_stop();
+			ret = 0;
 		}
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
-
-		case WDIOC_SETOPTIONS: {
-			unsigned long flags;
-			int options, ret = -EINVAL;
-
-			if (get_user(options, p))
-				return -EFAULT;
-
-			spin_lock_irqsave(&bfin_wdt_spinlock, flags);
-
-			if (options & WDIOS_DISABLECARD) {
-				bfin_wdt_stop();
-				ret = 0;
-			}
-
-			if (options & WDIOS_ENABLECARD) {
-				bfin_wdt_start();
-				ret = 0;
-			}
-
-			spin_unlock_irqrestore(&bfin_wdt_spinlock, flags);
-
-			return ret;
+		if (options & WDIOS_ENABLECARD) {
+			bfin_wdt_start();
+			ret = 0;
 		}
+		spin_unlock_irqrestore(&bfin_wdt_spinlock, flags);
+		return ret;
+	}
+	case WDIOC_KEEPALIVE:
+		bfin_wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT: {
+		int new_timeout;
+
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (bfin_wdt_set_timeout(new_timeout))
+			return -EINVAL;
+	}
+	/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -323,8 +312,8 @@ static int bfin_wdt_ioctl(struct inode *inode, struct file *file,
  *	Handles specific events, such as turning off the watchdog during a
  *	shutdown event.
  */
-static int bfin_wdt_notify_sys(struct notifier_block *this, unsigned long code,
-                               void *unused)
+static int bfin_wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
 	stampit();
 
@@ -379,12 +368,12 @@ static int bfin_wdt_resume(struct platform_device *pdev)
 #endif
 
 static const struct file_operations bfin_wdt_fops = {
-	.owner    = THIS_MODULE,
-	.llseek   = no_llseek,
-	.write    = bfin_wdt_write,
-	.ioctl    = bfin_wdt_ioctl,
-	.open     = bfin_wdt_open,
-	.release  = bfin_wdt_release,
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write    	= bfin_wdt_write,
+	.unlocked_ioctl	= bfin_wdt_ioctl,
+	.open		= bfin_wdt_open,
+	.release	= bfin_wdt_release,
 };
 
 static struct miscdevice bfin_wdt_miscdev = {
@@ -396,8 +385,8 @@ static struct miscdevice bfin_wdt_miscdev = {
 static struct watchdog_info bfin_wdt_info = {
 	.identity = "Blackfin Watchdog",
 	.options  = WDIOF_SETTIMEOUT |
-	            WDIOF_KEEPALIVEPING |
-	            WDIOF_MAGICCLOSE,
+		    WDIOF_KEEPALIVEPING |
+		    WDIOF_MAGICCLOSE,
 };
 
 static struct notifier_block bfin_wdt_notifier = {
@@ -416,14 +405,16 @@ static int __devinit bfin_wdt_probe(struct platform_device *pdev)
 
 	ret = register_reboot_notifier(&bfin_wdt_notifier);
 	if (ret) {
-		pr_devinit(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+		pr_devinit(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		return ret;
 	}
 
 	ret = misc_register(&bfin_wdt_miscdev);
 	if (ret) {
-		pr_devinit(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-		       WATCHDOG_MINOR, ret);
+		pr_devinit(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+				WATCHDOG_MINOR, ret);
 		unregister_reboot_notifier(&bfin_wdt_notifier);
 		return ret;
 	}
@@ -516,7 +507,11 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 module_param(timeout, uint, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default="
+		__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index 770824458d4..c3b78a76f17 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -18,9 +18,9 @@
 #include <linux/miscdevice.h>
 #include <linux/notifier.h>
 #include <linux/watchdog.h>
+#include <linux/uaccess.h>
 
 #include <asm/reg_booke.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 /* If the kernel parameter wdt=1, the watchdog will be enabled at boot.
@@ -32,7 +32,7 @@
  */
 
 #ifdef	CONFIG_FSL_BOOKE
-#define WDT_PERIOD_DEFAULT 63	/* Ex. wdt_period=28 bus=333Mhz , reset=~40sec */
+#define WDT_PERIOD_DEFAULT 63	/* Ex. wdt_period=28 bus=333Mhz,reset=~40sec */
 #else
 #define WDT_PERIOD_DEFAULT 3	/* Refer to the PPC40x and PPC4xx manuals */
 #endif				/* for timing information */
@@ -82,16 +82,15 @@ static struct watchdog_info ident = {
 	.identity = "PowerPC Book-E Watchdog",
 };
 
-static int booke_wdt_ioctl(struct inode *inode, struct file *file,
-			    unsigned int cmd, unsigned long arg)
+static long booke_wdt_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	u32 tmp = 0;
 	u32 __user *p = (u32 __user *)arg;
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user((struct watchdog_info __user *)arg, &ident,
-				sizeof(struct watchdog_info)))
+		if (copy_to_user(arg, &ident, sizeof(struct watchdog_info)))
 			return -EFAULT;
 	case WDIOC_GETSTATUS:
 		return put_user(ident.options, p);
@@ -100,16 +99,6 @@ static int booke_wdt_ioctl(struct inode *inode, struct file *file,
 		tmp = mfspr(SPRN_TSR) & TSR_WRS(3);
 		/* returns 1 if last reset was caused by the WDT */
 		return (tmp ? 1 : 0);
-	case WDIOC_KEEPALIVE:
-		booke_wdt_ping();
-		return 0;
-	case WDIOC_SETTIMEOUT:
-		if (get_user(booke_wdt_period, p))
-			return -EFAULT;
-		mtspr(SPRN_TCR, (mfspr(SPRN_TCR)&~WDTP(0))|WDTP(booke_wdt_period));
-		return 0;
-	case WDIOC_GETTIMEOUT:
-		return put_user(booke_wdt_period, p);
 	case WDIOC_SETOPTIONS:
 		if (get_user(tmp, p))
 			return -EINVAL;
@@ -119,6 +108,17 @@ static int booke_wdt_ioctl(struct inode *inode, struct file *file,
 		} else
 			return -EINVAL;
 		return 0;
+	case WDIOC_KEEPALIVE:
+		booke_wdt_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(booke_wdt_period, p))
+			return -EFAULT;
+		mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP(0)) |
+						WDTP(booke_wdt_period));
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(booke_wdt_period, p);
 	default:
 		return -ENOTTY;
 	}
@@ -132,8 +132,9 @@ static int booke_wdt_open(struct inode *inode, struct file *file)
 	if (booke_wdt_enabled == 0) {
 		booke_wdt_enabled = 1;
 		on_each_cpu(__booke_wdt_enable, NULL, 0);
-		printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
-				"(wdt_period=%d)\n", booke_wdt_period);
+		printk(KERN_INFO
+		      "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
+				booke_wdt_period);
 	}
 	spin_unlock(&booke_wdt_lock);
 
@@ -144,7 +145,7 @@ static const struct file_operations booke_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = booke_wdt_write,
-	.ioctl = booke_wdt_ioctl,
+	.unlocked_ioctl = booke_wdt_ioctl,
 	.open = booke_wdt_open,
 };
 
@@ -175,8 +176,9 @@ static int __init booke_wdt_init(void)
 
 	spin_lock(&booke_wdt_lock);
 	if (booke_wdt_enabled == 1) {
-		printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
-				"(wdt_period=%d)\n", booke_wdt_period);
+		printk(KERN_INFO
+		      "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
+				booke_wdt_period);
 		on_each_cpu(__booke_wdt_enable, NULL, 0);
 	}
 	spin_unlock(&booke_wdt_lock);
diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c
index df72f90123d..71f6d7eec9a 100644
--- a/drivers/watchdog/cpu5wdt.c
+++ b/drivers/watchdog/cpu5wdt.c
@@ -30,16 +30,16 @@
 #include <linux/timer.h>
 #include <linux/completion.h>
 #include <linux/jiffies.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <linux/watchdog.h>
 
 /* adjustable parameters */
 
-static int verbose = 0;
+static int verbose;
 static int port = 0x91;
 static int ticks = 10000;
+static spinlock_t cpu5wdt_lock;
 
 #define PFX			"cpu5wdt: "
 
@@ -70,12 +70,13 @@ static struct {
 
 static void cpu5wdt_trigger(unsigned long unused)
 {
-	if ( verbose > 2 )
+	if (verbose > 2)
 		printk(KERN_DEBUG PFX "trigger at %i ticks\n", ticks);
 
-	if( cpu5wdt_device.running )
+	if (cpu5wdt_device.running)
 		ticks--;
 
+	spin_lock(&cpu5wdt_lock);
 	/* keep watchdog alive */
 	outb(1, port + CPU5WDT_TRIGGER_REG);
 
@@ -86,6 +87,7 @@ static void cpu5wdt_trigger(unsigned long unused)
 		/* ticks doesn't matter anyway */
 		complete(&cpu5wdt_device.stop);
 	}
+	spin_unlock(&cpu5wdt_lock);
 
 }
 
@@ -93,14 +95,17 @@ static void cpu5wdt_reset(void)
 {
 	ticks = cpu5wdt_device.default_ticks;
 
-	if ( verbose )
+	if (verbose)
 		printk(KERN_DEBUG PFX "reset (%i ticks)\n", (int) ticks);
 
 }
 
 static void cpu5wdt_start(void)
 {
-	if ( !cpu5wdt_device.queue ) {
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpu5wdt_lock, flags);
+	if (!cpu5wdt_device.queue) {
 		cpu5wdt_device.queue = 1;
 		outb(0, port + CPU5WDT_TIME_A_REG);
 		outb(0, port + CPU5WDT_TIME_B_REG);
@@ -111,18 +116,20 @@ static void cpu5wdt_start(void)
 	}
 	/* if process dies, counter is not decremented */
 	cpu5wdt_device.running++;
+	spin_unlock_irqrestore(&cpu5wdt_lock, flags);
 }
 
 static int cpu5wdt_stop(void)
 {
-	if ( cpu5wdt_device.running )
-		cpu5wdt_device.running = 0;
+	unsigned long flags;
 
+	spin_lock_irqsave(&cpu5wdt_lock, flags);
+	if (cpu5wdt_device.running)
+		cpu5wdt_device.running = 0;
 	ticks = cpu5wdt_device.default_ticks;
-
-	if ( verbose )
+	spin_unlock_irqrestore(&cpu5wdt_lock, flags);
+	if (verbose)
 		printk(KERN_CRIT PFX "stop not possible\n");
-
 	return -EIO;
 }
 
@@ -130,9 +137,8 @@ static int cpu5wdt_stop(void)
 
 static int cpu5wdt_open(struct inode *inode, struct file *file)
 {
-	if ( test_and_set_bit(0, &cpu5wdt_device.inuse) )
+	if (test_and_set_bit(0, &cpu5wdt_device.inuse))
 		return -EBUSY;
-
 	return nonseekable_open(inode, file);
 }
 
@@ -142,67 +148,58 @@ static int cpu5wdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int cpu5wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long cpu5wdt_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
 	unsigned int value;
-	static struct watchdog_info ident =
-	{
+	static struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "CPU5 WDT",
 	};
 
-	switch(cmd) {
-		case WDIOC_KEEPALIVE:
-			cpu5wdt_reset();
-			break;
-		case WDIOC_GETSTATUS:
-			value = inb(port + CPU5WDT_STATUS_REG);
-			value = (value >> 2) & 1;
-			if ( copy_to_user(argp, &value, sizeof(int)) )
-				return -EFAULT;
-			break;
-		case WDIOC_GETBOOTSTATUS:
-			if ( copy_to_user(argp, &value, sizeof(int)) )
-				return -EFAULT;
-			break;
-		case WDIOC_GETSUPPORT:
-			if ( copy_to_user(argp, &ident, sizeof(ident)) )
-				return -EFAULT;
-			break;
-		case WDIOC_SETOPTIONS:
-			if ( copy_from_user(&value, argp, sizeof(int)) )
-				return -EFAULT;
-			switch(value) {
-				case WDIOS_ENABLECARD:
-					cpu5wdt_start();
-					break;
-				case WDIOS_DISABLECARD:
-					return cpu5wdt_stop();
-				default:
-					return -EINVAL;
-			}
-			break;
-		default:
-    			return -ENOTTY;
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+		value = inb(port + CPU5WDT_STATUS_REG);
+		value = (value >> 2) & 1;
+		return put_user(value, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+		if (get_user(value, p))
+			return -EFAULT;
+		if (value & WDIOS_ENABLECARD)
+			cpu5wdt_start();
+		if (value & WDIOS_DISABLECARD)
+			cpu5wdt_stop();
+		break;
+	case WDIOC_KEEPALIVE:
+		cpu5wdt_reset();
+		break;
+	default:
+		return -ENOTTY;
 	}
 	return 0;
 }
 
-static ssize_t cpu5wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t cpu5wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
-	if ( !count )
+	if (!count)
 		return -EIO;
-
 	cpu5wdt_reset();
-
 	return count;
 }
 
 static const struct file_operations cpu5wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= cpu5wdt_ioctl,
+	.unlocked_ioctl	= cpu5wdt_ioctl,
 	.open		= cpu5wdt_open,
 	.write		= cpu5wdt_write,
 	.release	= cpu5wdt_release,
@@ -221,37 +218,36 @@ static int __devinit cpu5wdt_init(void)
 	unsigned int val;
 	int err;
 
-	if ( verbose )
-		printk(KERN_DEBUG PFX "port=0x%x, verbose=%i\n", port, verbose);
+	if (verbose)
+		printk(KERN_DEBUG PFX
+				"port=0x%x, verbose=%i\n", port, verbose);
 
-	if ( !request_region(port, CPU5WDT_EXTENT, PFX) ) {
+	init_completion(&cpu5wdt_device.stop);
+	spin_lock_init(&cpu5wdt_lock);
+	cpu5wdt_device.queue = 0;
+	setup_timer(&cpu5wdt_device.timer, cpu5wdt_trigger, 0);
+	cpu5wdt_device.default_ticks = ticks;
+
+	if (!request_region(port, CPU5WDT_EXTENT, PFX)) {
 		printk(KERN_ERR PFX "request_region failed\n");
 		err = -EBUSY;
 		goto no_port;
 	}
 
-	if ( (err = misc_register(&cpu5wdt_misc)) < 0 ) {
-		printk(KERN_ERR PFX "misc_register failed\n");
-		goto no_misc;
-	}
-
 	/* watchdog reboot? */
 	val = inb(port + CPU5WDT_STATUS_REG);
 	val = (val >> 2) & 1;
-	if ( !val )
+	if (!val)
 		printk(KERN_INFO PFX "sorry, was my fault\n");
 
-	init_completion(&cpu5wdt_device.stop);
-	cpu5wdt_device.queue = 0;
-
-	clear_bit(0, &cpu5wdt_device.inuse);
-
-	setup_timer(&cpu5wdt_device.timer, cpu5wdt_trigger, 0);
+	err = misc_register(&cpu5wdt_misc);
+	if (err < 0) {
+		printk(KERN_ERR PFX "misc_register failed\n");
+		goto no_misc;
+	}
 
-	cpu5wdt_device.default_ticks = ticks;
 
 	printk(KERN_INFO PFX "init success\n");
-
 	return 0;
 
 no_misc:
@@ -267,7 +263,7 @@ static int __devinit cpu5wdt_init_module(void)
 
 static void __devexit cpu5wdt_exit(void)
 {
-	if ( cpu5wdt_device.queue ) {
+	if (cpu5wdt_device.queue) {
 		cpu5wdt_device.queue = 0;
 		wait_for_completion(&cpu5wdt_device.stop);
 	}
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 1782c79eff0..2e136028673 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -22,10 +22,9 @@
 #include <linux/bitops.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
-
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
 
 #define MODULE_NAME "DAVINCI-WDT: "
 
@@ -143,9 +142,8 @@ static struct watchdog_info ident = {
 	.identity = "DaVinci Watchdog",
 };
 
-static int
-davinci_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		  unsigned long arg)
+static long davinci_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	int ret = -ENOTTY;
 
@@ -160,14 +158,14 @@ davinci_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ret = put_user(0, (int *)arg);
 		break;
 
-	case WDIOC_GETTIMEOUT:
-		ret = put_user(heartbeat, (int *)arg);
-		break;
-
 	case WDIOC_KEEPALIVE:
 		wdt_service();
 		ret = 0;
 		break;
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(heartbeat, (int *)arg);
+		break;
 	}
 	return ret;
 }
@@ -184,7 +182,7 @@ static const struct file_operations davinci_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = davinci_wdt_write,
-	.ioctl = davinci_wdt_ioctl,
+	.unlocked_ioctl = davinci_wdt_ioctl,
 	.open = davinci_wdt_open,
 	.release = davinci_wdt_release,
 };
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index 0e4787a0bb8..e9f950ff86e 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -28,9 +28,8 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/timer.h>
-
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
 
 #define WDT_VERSION	"0.3"
 #define PFX		"ep93xx_wdt: "
@@ -136,9 +135,8 @@ static struct watchdog_info ident = {
 	.identity = "EP93xx Watchdog",
 };
 
-static int
-ep93xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		 unsigned long arg)
+static long ep93xx_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	int ret = -ENOTTY;
 
@@ -156,15 +154,15 @@ ep93xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ret = put_user(boot_status, (int __user *)arg);
 		break;
 
-	case WDIOC_GETTIMEOUT:
-		/* actually, it is 0.250 seconds.... */
-		ret = put_user(1, (int __user *)arg);
-		break;
-
 	case WDIOC_KEEPALIVE:
 		wdt_keepalive();
 		ret = 0;
 		break;
+
+	case WDIOC_GETTIMEOUT:
+		/* actually, it is 0.250 seconds.... */
+		ret = put_user(1, (int __user *)arg);
+		break;
 	}
 	return ret;
 }
@@ -174,8 +172,8 @@ static int ep93xx_wdt_release(struct inode *inode, struct file *file)
 	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
 		wdt_shutdown();
 	else
-		printk(KERN_CRIT PFX "Device closed unexpectedly - "
-			"timer will not stop\n");
+		printk(KERN_CRIT PFX
+			"Device closed unexpectedly - timer will not stop\n");
 
 	clear_bit(WDT_IN_USE, &wdt_status);
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
@@ -186,7 +184,7 @@ static int ep93xx_wdt_release(struct inode *inode, struct file *file)
 static const struct file_operations ep93xx_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.write		= ep93xx_wdt_write,
-	.ioctl		= ep93xx_wdt_ioctl,
+	.unlocked_ioctl	= ep93xx_wdt_ioctl,
 	.open		= ep93xx_wdt_open,
 	.release	= ep93xx_wdt_release,
 };
@@ -243,7 +241,9 @@ module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
 
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 MODULE_AUTHOR("Ray Lehtiniemi <rayl@mail.com>,"
 		"Alessandro Zummo <a.zummo@towertech.it>");
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index b14e9d1f164..bbd14e34319 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -56,14 +56,15 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 static unsigned long eurwdt_is_open;
 static int eurwdt_timeout;
 static char eur_expect_close;
+static spinlock_t eurwdt_lock;
 
 /*
  * You must set these - there is no sane way to probe for this board.
@@ -78,7 +79,9 @@ static char *ev = "int";
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * Some symbolic names
@@ -137,7 +140,8 @@ static void eurwdt_activate_timer(void)
 {
 	eurwdt_disable_timer();
 	eurwdt_write_reg(WDT_CTRL_REG, 0x01);	/* activate the WDT */
-	eurwdt_write_reg(WDT_OUTPIN_CFG, !strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT);
+	eurwdt_write_reg(WDT_OUTPIN_CFG,
+		!strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT);
 
 	/* Setting interrupt line */
 	if (irq == 2 || irq > 15 || irq < 0) {
@@ -206,21 +210,21 @@ size_t count, loff_t *ppos)
 
 			for (i = 0; i != count; i++) {
 				char c;
-				if(get_user(c, buf+i))
+				if (get_user(c, buf + i))
 					return -EFAULT;
 				if (c == 'V')
 					eur_expect_close = 42;
 			}
 		}
+		spin_lock(&eurwdt_lock);
 		eurwdt_ping();	/* the default timeout */
+		spin_unlock(&eurwdt_lock);
 	}
-
 	return count;
 }
 
 /**
  * eurwdt_ioctl:
- * @inode: inode of the device
  * @file: file handle to the device
  * @cmd: watchdog command
  * @arg: argument pointer
@@ -229,13 +233,14 @@ size_t count, loff_t *ppos)
  * according to their available features.
  */
 
-static int eurwdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long eurwdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	static struct watchdog_info ident = {
-		.options	  = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+		.options	  = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity	  = "WDT Eurotech CPU-1220/1410",
 	};
@@ -243,10 +248,7 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file,
 	int time;
 	int options, retval = -EINVAL;
 
-	switch(cmd) {
-	default:
-		return -ENOTTY;
-
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
 
@@ -254,8 +256,26 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);
 
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, p))
+			return -EFAULT;
+		spin_lock(&eurwdt_lock);
+		if (options & WDIOS_DISABLECARD) {
+			eurwdt_disable_timer();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			eurwdt_activate_timer();
+			eurwdt_ping();
+			retval = 0;
+		}
+		spin_unlock(&eurwdt_lock);
+		return retval;
+
 	case WDIOC_KEEPALIVE:
+		spin_lock(&eurwdt_lock);
 		eurwdt_ping();
+		spin_unlock(&eurwdt_lock);
 		return 0;
 
 	case WDIOC_SETTIMEOUT:
@@ -266,26 +286,17 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file,
 		if (time < 0 || time > 255)
 			return -EINVAL;
 
+		spin_lock(&eurwdt_lock);
 		eurwdt_timeout = time;
 		eurwdt_set_timeout(time);
+		spin_unlock(&eurwdt_lock);
 		/* Fall */
 
 	case WDIOC_GETTIMEOUT:
 		return put_user(eurwdt_timeout, p);
 
-	case WDIOC_SETOPTIONS:
-		if (get_user(options, p))
-			return -EFAULT;
-		if (options & WDIOS_DISABLECARD) {
-			eurwdt_disable_timer();
-			retval = 0;
-		}
-		if (options & WDIOS_ENABLECARD) {
-			eurwdt_activate_timer();
-			eurwdt_ping();
-			retval = 0;
-		}
-		return retval;
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -322,10 +333,11 @@ static int eurwdt_open(struct inode *inode, struct file *file)
 
 static int eurwdt_release(struct inode *inode, struct file *file)
 {
-	if (eur_expect_close == 42) {
+	if (eur_expect_close == 42)
 		eurwdt_disable_timer();
-	} else {
-		printk(KERN_CRIT "eurwdt: Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT
+			"eurwdt: Unexpected close, not stopping watchdog!\n");
 		eurwdt_ping();
 	}
 	clear_bit(0, &eurwdt_is_open);
@@ -348,10 +360,8 @@ static int eurwdt_release(struct inode *inode, struct file *file)
 static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT) {
-		/* Turn the card off */
-		eurwdt_disable_timer();
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		eurwdt_disable_timer();	/* Turn the card off */
 
 	return NOTIFY_DONE;
 }
@@ -362,11 +372,11 @@ static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code,
 
 
 static const struct file_operations eurwdt_fops = {
-	.owner	= THIS_MODULE,
-	.llseek	= no_llseek,
-	.write	= eurwdt_write,
-	.ioctl	= eurwdt_ioctl,
-	.open	= eurwdt_open,
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= eurwdt_write,
+	.unlocked_ioctl	= eurwdt_ioctl,
+	.open		= eurwdt_open,
 	.release	= eurwdt_release,
 };
 
@@ -419,7 +429,7 @@ static int __init eurwdt_init(void)
 	int ret;
 
 	ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL);
-	if(ret) {
+	if (ret) {
 		printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
 		goto out;
 	}
@@ -432,10 +442,13 @@ static int __init eurwdt_init(void)
 
 	ret = register_reboot_notifier(&eurwdt_notifier);
 	if (ret) {
-		printk(KERN_ERR "eurwdt: can't register reboot notifier (err=%d)\n", ret);
+		printk(KERN_ERR
+		    "eurwdt: can't register reboot notifier (err=%d)\n", ret);
 		goto outreg;
 	}
 
+	spin_lock_init(&eurwdt_lock);
+
 	ret = misc_register(&eurwdt_miscdev);
 	if (ret) {
 		printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n",
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
index 30d09cbbad9..614a5c7017b 100644
--- a/drivers/watchdog/geodewdt.c
+++ b/drivers/watchdog/geodewdt.c
@@ -17,8 +17,8 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
+#include <linux/uaccess.h>
 
-#include <asm/uaccess.h>
 #include <asm/geode.h>
 
 #define GEODEWDT_HZ 500
@@ -77,27 +77,24 @@ static int geodewdt_set_heartbeat(int val)
 	return 0;
 }
 
-static int
-geodewdt_open(struct inode *inode, struct file *file)
+static int geodewdt_open(struct inode *inode, struct file *file)
 {
-        if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags))
-                return -EBUSY;
+	if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags))
+		return -EBUSY;
 
-        if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags))
-                __module_get(THIS_MODULE);
+	if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags))
+		__module_get(THIS_MODULE);
 
 	geodewdt_ping();
-        return nonseekable_open(inode, file);
+	return nonseekable_open(inode, file);
 }
 
-static int
-geodewdt_release(struct inode *inode, struct file *file)
+static int geodewdt_release(struct inode *inode, struct file *file)
 {
 	if (safe_close) {
 		geodewdt_disable();
 		module_put(THIS_MODULE);
-	}
-	else {
+	} else {
 		printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n");
 		geodewdt_ping();
 
@@ -109,11 +106,10 @@ geodewdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t
-geodewdt_write(struct file *file, const char __user *data, size_t len,
-	       loff_t *ppos)
+static ssize_t geodewdt_write(struct file *file, const char __user *data,
+				size_t len, loff_t *ppos)
 {
-        if(len) {
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 			safe_close = 0;
@@ -134,9 +130,8 @@ geodewdt_write(struct file *file, const char __user *data, size_t len,
 	return len;
 }
 
-static int
-geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	       unsigned long arg)
+static int geodewdt_ioctl(struct inode *inode, struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -147,9 +142,9 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		| WDIOF_MAGICCLOSE,
 		.firmware_version =     1,
 		.identity =             WATCHDOG_NAME,
-        };
+	};
 
-	switch(cmd) {
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		return copy_to_user(argp, &ident,
 				    sizeof(ident)) ? -EFAULT : 0;
@@ -159,22 +154,6 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);
 
-	case WDIOC_KEEPALIVE:
-		geodewdt_ping();
-		return 0;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(interval, p))
-			return -EFAULT;
-
-		if (geodewdt_set_heartbeat(interval))
-			return -EINVAL;
-
-/* Fall through */
-
-	case WDIOC_GETTIMEOUT:
-		return put_user(timeout, p);
-
 	case WDIOC_SETOPTIONS:
 	{
 		int options, ret = -EINVAL;
@@ -194,6 +173,20 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 		return ret;
 	}
+	case WDIOC_KEEPALIVE:
+		geodewdt_ping();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(interval, p))
+			return -EFAULT;
+
+		if (geodewdt_set_heartbeat(interval))
+			return -EINVAL;
+	/* Fall through */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
 	default:
 		return -ENOTTY;
 	}
@@ -202,22 +195,21 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 }
 
 static const struct file_operations geodewdt_fops = {
-        .owner          = THIS_MODULE,
-        .llseek         = no_llseek,
-        .write          = geodewdt_write,
-        .ioctl          = geodewdt_ioctl,
-        .open           = geodewdt_open,
-        .release        = geodewdt_release,
+	.owner          = THIS_MODULE,
+	.llseek         = no_llseek,
+	.write          = geodewdt_write,
+	.ioctl          = geodewdt_ioctl,
+	.open           = geodewdt_open,
+	.release        = geodewdt_release,
 };
 
 static struct miscdevice geodewdt_miscdev = {
 	.minor = WATCHDOG_MINOR,
 	.name = "watchdog",
-	.fops = &geodewdt_fops
+	.fops = &geodewdt_fops,
 };
 
-static int __devinit
-geodewdt_probe(struct platform_device *dev)
+static int __devinit geodewdt_probe(struct platform_device *dev)
 {
 	int ret, timer;
 
@@ -248,15 +240,13 @@ geodewdt_probe(struct platform_device *dev)
 	return ret;
 }
 
-static int __devexit
-geodewdt_remove(struct platform_device *dev)
+static int __devexit geodewdt_remove(struct platform_device *dev)
 {
 	misc_deregister(&geodewdt_miscdev);
 	return 0;
 }
 
-static void
-geodewdt_shutdown(struct platform_device *dev)
+static void geodewdt_shutdown(struct platform_device *dev)
 {
 	geodewdt_disable();
 }
@@ -271,8 +261,7 @@ static struct platform_driver geodewdt_driver = {
 	},
 };
 
-static int __init
-geodewdt_init(void)
+static int __init geodewdt_init(void)
 {
 	int ret;
 
@@ -292,8 +281,7 @@ err:
 	return ret;
 }
 
-static void __exit
-geodewdt_exit(void)
+static void __exit geodewdt_exit(void)
 {
 	platform_device_unregister(geodewdt_platform_device);
 	platform_driver_unregister(&geodewdt_driver);
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index eaa3f2a79ff..a3765e0be4a 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -39,9 +39,7 @@
 #include <linux/string.h>
 #include <linux/bootmem.h>
 #include <linux/slab.h>
-#include <asm/dmi.h>
 #include <asm/desc.h>
-#include <asm/kdebug.h>
 
 #define PCI_BIOS32_SD_VALUE		0x5F32335F	/* "_32_" */
 #define CRU_BIOS_SIGNATURE_VALUE	0x55524324
@@ -118,6 +116,7 @@ static unsigned int reload;			/* the computed soft_margin */
 static int nowayout = WATCHDOG_NOWAYOUT;
 static char expect_release;
 static unsigned long hpwdt_is_open;
+static unsigned int allow_kdump;
 
 static void __iomem *pci_mem_addr;		/* the PCI-memory address */
 static unsigned long __iomem *hpwdt_timer_reg;
@@ -223,19 +222,19 @@ static int __devinit cru_detect(unsigned long map_entry,
 
 	if (cmn_regs.u1.ral != 0) {
 		printk(KERN_WARNING
-		       "hpwdt: Call succeeded but with an error: 0x%x\n",
-		       cmn_regs.u1.ral);
+			"hpwdt: Call succeeded but with an error: 0x%x\n",
+			cmn_regs.u1.ral);
 	} else {
 		physical_bios_base = cmn_regs.u2.rebx;
 		physical_bios_offset = cmn_regs.u4.redx;
 		cru_length = cmn_regs.u3.recx;
 		cru_physical_address =
-		    physical_bios_base + physical_bios_offset;
+			physical_bios_base + physical_bios_offset;
 
 		/* If the values look OK, then map it in. */
 		if ((physical_bios_base + physical_bios_offset)) {
 			cru_rom_addr =
-			    ioremap(cru_physical_address, cru_length);
+				ioremap(cru_physical_address, cru_length);
 			if (cru_rom_addr)
 				retval = 0;
 		}
@@ -358,7 +357,6 @@ asm(".text                      \n\t"
     "call       *%r12           \n\t"
     "pushfq                     \n\t"
     "popq        %r12           \n\t"
-    "popfq                      \n\t"
     "movl       %eax, (%r9)     \n\t"
     "movl       %ebx, 4(%r9)    \n\t"
     "movl       %ecx, 8(%r9)    \n\t"
@@ -392,10 +390,10 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm)
 		smbios_cru64_ptr = (struct smbios_cru64_info *) dm;
 		if (smbios_cru64_ptr->signature == CRU_BIOS_SIGNATURE_VALUE) {
 			cru_physical_address =
-			    smbios_cru64_ptr->physical_address +
-			    smbios_cru64_ptr->double_offset;
+				smbios_cru64_ptr->physical_address +
+				smbios_cru64_ptr->double_offset;
 			cru_rom_addr = ioremap(cru_physical_address,
-				    smbios_cru64_ptr->double_length);
+				smbios_cru64_ptr->double_length);
 		}
 	}
 }
@@ -407,7 +405,7 @@ static int __devinit detect_cru_service(void)
 	dmi_walk(dmi_find_cru);
 
 	/* if cru_rom_addr has been set then we found a CRU service */
-	return ((cru_rom_addr != NULL)? 0: -ENODEV);
+	return ((cru_rom_addr != NULL) ? 0 : -ENODEV);
 }
 
 /* ------------------------------------------------------------------------- */
@@ -415,34 +413,6 @@ static int __devinit detect_cru_service(void)
 #endif
 
 /*
- *	NMI Handler
- */
-static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
-			    void *data)
-{
-	static unsigned long rom_pl;
-	static int die_nmi_called;
-
-	if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
-		return NOTIFY_OK;
-
-	spin_lock_irqsave(&rom_lock, rom_pl);
-	if (!die_nmi_called)
-		asminline_call(&cmn_regs, cru_rom_addr);
-	die_nmi_called = 1;
-	spin_unlock_irqrestore(&rom_lock, rom_pl);
-	if (cmn_regs.u1.ral == 0) {
-		printk(KERN_WARNING "hpwdt: An NMI occurred, "
-		       "but unable to determine source.\n");
-	} else {
-		panic("An NMI occurred, please see the Integrated "
-			"Management Log for details.\n");
-	}
-
-	return NOTIFY_STOP;
-}
-
-/*
  *	Watchdog operations
  */
 static void hpwdt_start(void)
@@ -486,6 +456,36 @@ static int hpwdt_change_timer(int new_margin)
 }
 
 /*
+ *	NMI Handler
+ */
+static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
+				void *data)
+{
+	unsigned long rom_pl;
+	static int die_nmi_called;
+
+	if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
+		return NOTIFY_OK;
+
+	spin_lock_irqsave(&rom_lock, rom_pl);
+	if (!die_nmi_called)
+		asminline_call(&cmn_regs, cru_rom_addr);
+	die_nmi_called = 1;
+	spin_unlock_irqrestore(&rom_lock, rom_pl);
+	if (cmn_regs.u1.ral == 0) {
+		printk(KERN_WARNING "hpwdt: An NMI occurred, "
+			"but unable to determine source.\n");
+	} else {
+		if (allow_kdump)
+			hpwdt_stop();
+		panic("An NMI occurred, please see the Integrated "
+			"Management Log for details.\n");
+	}
+
+	return NOTIFY_STOP;
+}
+
+/*
  *	/dev/watchdog handling
  */
 static int hpwdt_open(struct inode *inode, struct file *file)
@@ -535,7 +535,7 @@ static ssize_t hpwdt_write(struct file *file, const char __user *data,
 			/* scan to see whether or not we got the magic char. */
 			for (i = 0; i != len; i++) {
 				char c;
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_release = 42;
@@ -627,17 +627,18 @@ static struct notifier_block die_notifier = {
  */
 
 static int __devinit hpwdt_init_one(struct pci_dev *dev,
-				    const struct pci_device_id *ent)
+					const struct pci_device_id *ent)
 {
 	int retval;
 
 	/*
 	 * First let's find out if we are on an iLO2 server. We will
 	 * not run on a legacy ASM box.
+	 * So we only support the G5 ProLiant servers and higher.
 	 */
 	if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
 		dev_warn(&dev->dev,
-		       "This server does not have an iLO2 ASIC.\n");
+			"This server does not have an iLO2 ASIC.\n");
 		return -ENODEV;
 	}
 
@@ -671,7 +672,7 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 	retval = detect_cru_service();
 	if (retval < 0) {
 		dev_warn(&dev->dev,
-		       "Unable to detect the %d Bit CRU Service.\n",
+			"Unable to detect the %d Bit CRU Service.\n",
 			HPWDT_ARCH);
 		goto error_get_cru;
 	}
@@ -686,7 +687,7 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 	retval = register_die_notifier(&die_notifier);
 	if (retval != 0) {
 		dev_warn(&dev->dev,
-		       "Unable to register a die notifier (err=%d).\n",
+			"Unable to register a die notifier (err=%d).\n",
 			retval);
 		goto error_die_notifier;
 	}
@@ -701,8 +702,9 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 
 	printk(KERN_INFO
 		"hp Watchdog Timer Driver: 1.00"
-		", timer margin: %d seconds( nowayout=%d).\n",
-		soft_margin, nowayout);
+		", timer margin: %d seconds (nowayout=%d)"
+		", allow kernel dump: %s (default = 0/OFF).\n",
+		soft_margin, nowayout, (allow_kdump == 0) ? "OFF" : "ON");
 
 	return 0;
 
@@ -757,6 +759,9 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 module_param(soft_margin, int, 0);
 MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
 
+module_param(allow_kdump, int, 0);
+MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs");
+
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index ca44fd9b19b..c13383f7fcb 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -9,18 +9,18 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  *
- *      based on i810-tco.c which is in turn based on softdog.c
+ *	based on i810-tco.c which is in turn based on softdog.c
  *
- * 	The timer is implemented in the following I/O controller hubs:
- * 	(See the intel documentation on http://developer.intel.com.)
- * 	6300ESB chip : document number 300641-003
+ *	The timer is implemented in the following I/O controller hubs:
+ *	(See the intel documentation on http://developer.intel.com.)
+ *	6300ESB chip : document number 300641-003
  *
  *  2004YYZZ Ross Biro
  *	Initial version 0.01
  *  2004YYZZ Ross Biro
- *  	Version 0.02
+ *	Version 0.02
  *  20050210 David Härdeman <david@2gen.com>
- *      Ported driver to kernel 2.6
+ *	Ported driver to kernel 2.6
  */
 
 /*
@@ -38,9 +38,8 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 /* Module and version information */
 #define ESB_VERSION "0.03"
@@ -59,17 +58,17 @@
 #define ESB_RELOAD_REG  BASEADDR + 0x0c /* Reload register                   */
 
 /* Lock register bits */
-#define ESB_WDT_FUNC    ( 0x01 << 2 )   /* Watchdog functionality            */
-#define ESB_WDT_ENABLE  ( 0x01 << 1 )   /* Enable WDT                        */
-#define ESB_WDT_LOCK    ( 0x01 << 0 )   /* Lock (nowayout)                   */
+#define ESB_WDT_FUNC    (0x01 << 2)   /* Watchdog functionality            */
+#define ESB_WDT_ENABLE  (0x01 << 1)   /* Enable WDT                        */
+#define ESB_WDT_LOCK    (0x01 << 0)   /* Lock (nowayout)                   */
 
 /* Config register bits */
-#define ESB_WDT_REBOOT  ( 0x01 << 5 )   /* Enable reboot on timeout          */
-#define ESB_WDT_FREQ    ( 0x01 << 2 )   /* Decrement frequency               */
-#define ESB_WDT_INTTYPE ( 0x11 << 0 )   /* Interrupt type on timer1 timeout  */
+#define ESB_WDT_REBOOT  (0x01 << 5)   /* Enable reboot on timeout          */
+#define ESB_WDT_FREQ    (0x01 << 2)   /* Decrement frequency               */
+#define ESB_WDT_INTTYPE (0x11 << 0)   /* Interrupt type on timer1 timeout  */
 
 /* Reload register bits */
-#define ESB_WDT_RELOAD ( 0x01 << 8 )    /* prevent timeout                   */
+#define ESB_WDT_RELOAD  (0x01 << 8)    /* prevent timeout                   */
 
 /* Magic constants */
 #define ESB_UNLOCK1     0x80            /* Step 1 to unlock reset registers  */
@@ -84,14 +83,20 @@ static unsigned short triggered; /* The status of the watchdog upon boot */
 static char esb_expect_close;
 
 /* module parameters */
-#define WATCHDOG_HEARTBEAT 30   /* 30 sec default heartbeat (1<heartbeat<2*1023) */
+/* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
+#define WATCHDOG_HEARTBEAT 30
 static int heartbeat = WATCHDOG_HEARTBEAT;  /* in seconds */
+
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<heartbeat<2046, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat,
+		"Watchdog heartbeat in seconds. (1<heartbeat<2046, default="
+				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * Some i6300ESB specific functions
@@ -103,9 +108,10 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _
  * reload register. After this the appropriate registers can be written
  * to once before they need to be unlocked again.
  */
-static inline void esb_unlock_registers(void) {
-        writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
-        writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
+static inline void esb_unlock_registers(void)
+{
+	writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
+	writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
 }
 
 static void esb_timer_start(void)
@@ -114,8 +120,7 @@ static void esb_timer_start(void)
 
 	/* Enable or Enable + Lock? */
 	val = 0x02 | (nowayout ? 0x01 : 0x00);
-
-        pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
+	pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
 }
 
 static int esb_timer_stop(void)
@@ -140,7 +145,7 @@ static void esb_timer_keepalive(void)
 	spin_lock(&esb_lock);
 	esb_unlock_registers();
 	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
-        /* FIXME: Do we need to flush anything here? */
+	/* FIXME: Do we need to flush anything here? */
 	spin_unlock(&esb_lock);
 }
 
@@ -165,9 +170,9 @@ static int esb_timer_set_heartbeat(int time)
 
 	/* Write timer 2 */
 	esb_unlock_registers();
-        writel(val, ESB_TIMER2_REG);
+	writel(val, ESB_TIMER2_REG);
 
-        /* Reload */
+	/* Reload */
 	esb_unlock_registers();
 	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
 
@@ -179,54 +184,55 @@ static int esb_timer_set_heartbeat(int time)
 	return 0;
 }
 
-static int esb_timer_read (void)
+static int esb_timer_read(void)
 {
-       	u32 count;
+	u32 count;
 
 	/* This isn't documented, and doesn't take into
-         * acount which stage is running, but it looks
-         * like a 20 bit count down, so we might as well report it.
-         */
-        pci_read_config_dword(esb_pci, 0x64, &count);
-        return (int)count;
+	 * acount which stage is running, but it looks
+	 * like a 20 bit count down, so we might as well report it.
+	 */
+	pci_read_config_dword(esb_pci, 0x64, &count);
+	return (int)count;
 }
 
 /*
- * 	/dev/watchdog handling
+ *	/dev/watchdog handling
  */
 
-static int esb_open (struct inode *inode, struct file *file)
+static int esb_open(struct inode *inode, struct file *file)
 {
-        /* /dev/watchdog can only be opened once */
-        if (test_and_set_bit(0, &timer_alive))
-                return -EBUSY;
+	/* /dev/watchdog can only be opened once */
+	if (test_and_set_bit(0, &timer_alive))
+		return -EBUSY;
 
-        /* Reload and activate timer */
-        esb_timer_keepalive ();
-        esb_timer_start ();
+	/* Reload and activate timer */
+	esb_timer_keepalive();
+	esb_timer_start();
 
 	return nonseekable_open(inode, file);
 }
 
-static int esb_release (struct inode *inode, struct file *file)
+static int esb_release(struct inode *inode, struct file *file)
 {
-        /* Shut off the timer. */
-        if (esb_expect_close == 42) {
-                esb_timer_stop ();
-        } else {
-                printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
-                esb_timer_keepalive ();
-        }
-        clear_bit(0, &timer_alive);
-        esb_expect_close = 0;
-        return 0;
+	/* Shut off the timer. */
+	if (esb_expect_close == 42)
+		esb_timer_stop();
+	else {
+		printk(KERN_CRIT PFX
+				"Unexpected close, not stopping watchdog!\n");
+		esb_timer_keepalive();
+	}
+	clear_bit(0, &timer_alive);
+	esb_expect_close = 0;
+	return 0;
 }
 
-static ssize_t esb_write (struct file *file, const char __user *data,
-			  size_t len, loff_t * ppos)
+static ssize_t esb_write(struct file *file, const char __user *data,
+			  size_t len, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-        if (len) {
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 
@@ -237,7 +243,7 @@ static ssize_t esb_write (struct file *file, const char __user *data,
 			/* scan to see whether or not we got the magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if(get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					esb_expect_close = 42;
@@ -245,92 +251,84 @@ static ssize_t esb_write (struct file *file, const char __user *data,
 		}
 
 		/* someone wrote to us, we should reload the timer */
-		esb_timer_keepalive ();
+		esb_timer_keepalive();
 	}
 	return len;
 }
 
-static int esb_ioctl (struct inode *inode, struct file *file,
-		      unsigned int cmd, unsigned long arg)
+static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int new_options, retval = -EINVAL;
 	int new_heartbeat;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	static struct watchdog_info ident = {
-		.options =              WDIOF_SETTIMEOUT |
+		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
-		.firmware_version =     0,
-		.identity =             ESB_MODULE_NAME,
+		.firmware_version =	0,
+		.identity =		ESB_MODULE_NAME,
 	};
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-					    sizeof (ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-			return put_user (esb_timer_read(), p);
-
-		case WDIOC_GETBOOTSTATUS:
-			return put_user (triggered, p);
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident,
+					sizeof(ident)) ? -EFAULT : 0;
 
-                case WDIOC_KEEPALIVE:
-                        esb_timer_keepalive ();
-                        return 0;
+	case WDIOC_GETSTATUS:
+		return put_user(esb_timer_read(), p);
 
-                case WDIOC_SETOPTIONS:
-                {
-                        if (get_user (new_options, p))
-                                return -EFAULT;
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(triggered, p);
 
-                        if (new_options & WDIOS_DISABLECARD) {
-                                esb_timer_stop ();
-                                retval = 0;
-                        }
+	case WDIOC_SETOPTIONS:
+	{
+		if (get_user(new_options, p))
+			return -EFAULT;
 
-                        if (new_options & WDIOS_ENABLECARD) {
-                                esb_timer_keepalive ();
-                                esb_timer_start ();
-                                retval = 0;
-                        }
-
-                        return retval;
-                }
-
-                case WDIOC_SETTIMEOUT:
-                {
-                        if (get_user(new_heartbeat, p))
-                                return -EFAULT;
-
-                        if (esb_timer_set_heartbeat(new_heartbeat))
-                            return -EINVAL;
-
-                        esb_timer_keepalive ();
-                        /* Fall */
-                }
-
-                case WDIOC_GETTIMEOUT:
-                        return put_user(heartbeat, p);
+		if (new_options & WDIOS_DISABLECARD) {
+			esb_timer_stop();
+			retval = 0;
+		}
 
-                default:
-                        return -ENOTTY;
-        }
+		if (new_options & WDIOS_ENABLECARD) {
+			esb_timer_keepalive();
+			esb_timer_start();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		esb_timer_keepalive();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+	{
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (esb_timer_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		esb_timer_keepalive();
+		/* Fall */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
 }
 
 /*
  *      Notify system
  */
 
-static int esb_notify_sys (struct notifier_block *this, unsigned long code, void *unused)
+static int esb_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
-        if (code==SYS_DOWN || code==SYS_HALT) {
-                /* Turn the WDT off */
-                esb_timer_stop ();
-        }
+	if (code == SYS_DOWN || code == SYS_HALT)
+		esb_timer_stop();	/* Turn the WDT off */
 
-        return NOTIFY_DONE;
+	return NOTIFY_DONE;
 }
 
 /*
@@ -338,22 +336,22 @@ static int esb_notify_sys (struct notifier_block *this, unsigned long code, void
  */
 
 static const struct file_operations esb_fops = {
-        .owner =        THIS_MODULE,
-        .llseek =       no_llseek,
-        .write =        esb_write,
-        .ioctl =        esb_ioctl,
-        .open =         esb_open,
-        .release =      esb_release,
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = esb_write,
+	.unlocked_ioctl = esb_ioctl,
+	.open = esb_open,
+	.release = esb_release,
 };
 
 static struct miscdevice esb_miscdev = {
-        .minor =        WATCHDOG_MINOR,
-        .name =         "watchdog",
-        .fops =         &esb_fops,
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &esb_fops,
 };
 
 static struct notifier_block esb_notifier = {
-        .notifier_call =        esb_notify_sys,
+	.notifier_call = esb_notify_sys,
 };
 
 /*
@@ -365,50 +363,44 @@ static struct notifier_block esb_notifier = {
  * want to register another driver on the same PCI id.
  */
 static struct pci_device_id esb_pci_tbl[] = {
-        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
-        { 0, },                 /* End of list */
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
+	{ 0, },                 /* End of list */
 };
-MODULE_DEVICE_TABLE (pci, esb_pci_tbl);
+MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
 
 /*
  *      Init & exit routines
  */
 
-static unsigned char __init esb_getdevice (void)
+static unsigned char __init esb_getdevice(void)
 {
 	u8 val1;
 	unsigned short val2;
+	/*
+	 *      Find the PCI device
+	 */
 
-        struct pci_dev *dev = NULL;
-        /*
-         *      Find the PCI device
-         */
-
-        for_each_pci_dev(dev) {
-                if (pci_match_id(esb_pci_tbl, dev)) {
-                        esb_pci = dev;
-                        break;
-                }
-	}
+	esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
+					PCI_DEVICE_ID_INTEL_ESB_9, NULL);
 
-        if (esb_pci) {
-        	if (pci_enable_device(esb_pci)) {
-			printk (KERN_ERR PFX "failed to enable device\n");
+	if (esb_pci) {
+		if (pci_enable_device(esb_pci)) {
+			printk(KERN_ERR PFX "failed to enable device\n");
 			goto err_devput;
 		}
 
 		if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
-			printk (KERN_ERR PFX "failed to request region\n");
+			printk(KERN_ERR PFX "failed to request region\n");
 			goto err_disable;
 		}
 
 		BASEADDR = ioremap(pci_resource_start(esb_pci, 0),
 				   pci_resource_len(esb_pci, 0));
 		if (BASEADDR == NULL) {
-                	/* Something's wrong here, BASEADDR has to be set */
-			printk (KERN_ERR PFX "failed to get BASEADDR\n");
-                        goto err_release;
-                }
+			/* Something's wrong here, BASEADDR has to be set */
+			printk(KERN_ERR PFX "failed to get BASEADDR\n");
+			goto err_release;
+		}
 
 		/*
 		 * The watchdog has two timers, it can be setup so that the
@@ -425,7 +417,7 @@ static unsigned char __init esb_getdevice (void)
 		/* Check that the WDT isn't already locked */
 		pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
 		if (val1 & ESB_WDT_LOCK)
-			printk (KERN_WARNING PFX "nowayout already set\n");
+			printk(KERN_WARNING PFX "nowayout already set\n");
 
 		/* Set the timer to watchdog mode and disable it for now */
 		pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
@@ -452,44 +444,44 @@ err_devput:
 	return 0;
 }
 
-static int __init watchdog_init (void)
+static int __init watchdog_init(void)
 {
-        int ret;
-
-        /* Check whether or not the hardware watchdog is there */
-        if (!esb_getdevice () || esb_pci == NULL)
-                return -ENODEV;
-
-        /* Check that the heartbeat value is within it's range ; if not reset to the default */
-        if (esb_timer_set_heartbeat (heartbeat)) {
-                esb_timer_set_heartbeat (WATCHDOG_HEARTBEAT);
-                printk(KERN_INFO PFX "heartbeat value must be 1<heartbeat<2046, using %d\n",
-		       heartbeat);
-        }
-
-        ret = register_reboot_notifier(&esb_notifier);
-        if (ret != 0) {
-                printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-                        ret);
-                goto err_unmap;
-        }
-
-        ret = misc_register(&esb_miscdev);
-        if (ret != 0) {
-                printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-                        WATCHDOG_MINOR, ret);
-                goto err_notifier;
-        }
-
-        esb_timer_stop ();
-
-        printk (KERN_INFO PFX "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
-                BASEADDR, heartbeat, nowayout);
+	int ret;
+
+	/* Check whether or not the hardware watchdog is there */
+	if (!esb_getdevice() || esb_pci == NULL)
+		return -ENODEV;
+
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
+	if (esb_timer_set_heartbeat(heartbeat)) {
+		esb_timer_set_heartbeat(WATCHDOG_HEARTBEAT);
+		printk(KERN_INFO PFX
+			"heartbeat value must be 1<heartbeat<2046, using %d\n",
+								heartbeat);
+	}
+	ret = register_reboot_notifier(&esb_notifier);
+	if (ret != 0) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
+		goto err_unmap;
+	}
 
-        return 0;
+	ret = misc_register(&esb_miscdev);
+	if (ret != 0) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
+		goto err_notifier;
+	}
+	esb_timer_stop();
+	printk(KERN_INFO PFX
+		"initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
+						BASEADDR, heartbeat, nowayout);
+	return 0;
 
 err_notifier:
-        unregister_reboot_notifier(&esb_notifier);
+	unregister_reboot_notifier(&esb_notifier);
 err_unmap:
 	iounmap(BASEADDR);
 /* err_release: */
@@ -498,18 +490,18 @@ err_unmap:
 	pci_disable_device(esb_pci);
 /* err_devput: */
 	pci_dev_put(esb_pci);
-        return ret;
+	return ret;
 }
 
-static void __exit watchdog_cleanup (void)
+static void __exit watchdog_cleanup(void)
 {
 	/* Stop the timer before we leave */
 	if (!nowayout)
-		esb_timer_stop ();
+		esb_timer_stop();
 
 	/* Deregister */
 	misc_deregister(&esb_miscdev);
-        unregister_reboot_notifier(&esb_notifier);
+	unregister_reboot_notifier(&esb_notifier);
 	iounmap(BASEADDR);
 	pci_release_region(esb_pci, 0);
 	pci_disable_device(esb_pci);
diff --git a/drivers/watchdog/iTCO_vendor.h b/drivers/watchdog/iTCO_vendor.h
new file mode 100644
index 00000000000..9e27e6422f6
--- /dev/null
+++ b/drivers/watchdog/iTCO_vendor.h
@@ -0,0 +1,15 @@
+/* iTCO Vendor Specific Support hooks */
+#ifdef CONFIG_ITCO_VENDOR_SUPPORT
+extern void iTCO_vendor_pre_start(unsigned long, unsigned int);
+extern void iTCO_vendor_pre_stop(unsigned long);
+extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int);
+extern void iTCO_vendor_pre_set_heartbeat(unsigned int);
+extern int iTCO_vendor_check_noreboot_on(void);
+#else
+#define iTCO_vendor_pre_start(acpibase, heartbeat)	{}
+#define iTCO_vendor_pre_stop(acpibase)			{}
+#define iTCO_vendor_pre_keepalive(acpibase, heartbeat)	{}
+#define iTCO_vendor_pre_set_heartbeat(heartbeat)	{}
+#define iTCO_vendor_check_noreboot_on()			1
+				/* 1=check noreboot; 0=don't check */
+#endif
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index cafc465f2ae..ca344a85eb9 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -18,9 +18,9 @@
  */
 
 /* Module and version information */
-#define DRV_NAME        "iTCO_vendor_support"
-#define DRV_VERSION     "1.01"
-#define DRV_RELDATE     "11-Nov-2006"
+#define DRV_NAME	"iTCO_vendor_support"
+#define DRV_VERSION	"1.01"
+#define DRV_RELDATE	"11-Nov-2006"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -31,19 +31,22 @@
 #include <linux/kernel.h>		/* For printk/panic/... */
 #include <linux/init.h>			/* For __init/__exit/... */
 #include <linux/ioport.h>		/* For io-port access */
+#include <linux/io.h>			/* For inb/outb/... */
 
-#include <asm/io.h>			/* For inb/outb/... */
+#include "iTCO_vendor.h"
 
 /* iTCO defines */
 #define	SMI_EN		acpibase + 0x30	/* SMI Control and Enable Register */
-#define	TCOBASE		acpibase + 0x60	/* TCO base address		*/
-#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
+#define	TCOBASE		acpibase + 0x60	/* TCO base address */
+#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register */
 
 /* List of vendor support modes */
-#define SUPERMICRO_OLD_BOARD	1	/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
-#define SUPERMICRO_NEW_BOARD	2	/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
+/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
+#define SUPERMICRO_OLD_BOARD	1
+/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
+#define SUPERMICRO_NEW_BOARD	2
 
-static int vendorsupport = 0;
+static int vendorsupport;
 module_param(vendorsupport, int, 0);
 MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
 
@@ -143,34 +146,35 @@ static void supermicro_old_pre_keepalive(unsigned long acpibase)
  */
 
 /* I/O Port's */
-#define SM_REGINDEX	0x2e		/* SuperMicro ICH4+ Register Index */
-#define SM_DATAIO	0x2f		/* SuperMicro ICH4+ Register Data I/O */
+#define SM_REGINDEX	0x2e	/* SuperMicro ICH4+ Register Index */
+#define SM_DATAIO	0x2f	/* SuperMicro ICH4+ Register Data I/O */
 
 /* Control Register's */
-#define SM_CTLPAGESW	0x07		/* SuperMicro ICH4+ Control Page Switch */
-#define SM_CTLPAGE		0x08	/* SuperMicro ICH4+ Control Page Num */
+#define SM_CTLPAGESW	0x07	/* SuperMicro ICH4+ Control Page Switch */
+#define SM_CTLPAGE	0x08	/* SuperMicro ICH4+ Control Page Num */
 
-#define SM_WATCHENABLE	0x30		/* Watchdog enable: Bit 0: 0=off, 1=on */
+#define SM_WATCHENABLE	0x30	/* Watchdog enable: Bit 0: 0=off, 1=on */
 
-#define SM_WATCHPAGE	0x87		/* Watchdog unlock control page */
+#define SM_WATCHPAGE	0x87	/* Watchdog unlock control page */
 
-#define SM_ENDWATCH	0xAA		/* Watchdog lock control page */
+#define SM_ENDWATCH	0xAA	/* Watchdog lock control page */
 
-#define SM_COUNTMODE	0xf5		/* Watchdog count mode select */
-					/* (Bit 3: 0 = seconds, 1 = minutes */
+#define SM_COUNTMODE	0xf5	/* Watchdog count mode select */
+				/* (Bit 3: 0 = seconds, 1 = minutes */
 
-#define SM_WATCHTIMER	0xf6		/* 8-bits, Watchdog timer counter (RW) */
+#define SM_WATCHTIMER	0xf6	/* 8-bits, Watchdog timer counter (RW) */
 
-#define SM_RESETCONTROL	0xf7		/* Watchdog reset control */
-					/* Bit 6: timer is reset by kbd interrupt */
-					/* Bit 7: timer is reset by mouse interrupt */
+#define SM_RESETCONTROL	0xf7	/* Watchdog reset control */
+				/* Bit 6: timer is reset by kbd interrupt */
+				/* Bit 7: timer is reset by mouse interrupt */
 
 static void supermicro_new_unlock_watchdog(void)
 {
-	outb(SM_WATCHPAGE, SM_REGINDEX);	/* Write 0x87 to port 0x2e twice */
+	/* Write 0x87 to port 0x2e twice */
 	outb(SM_WATCHPAGE, SM_REGINDEX);
-
-	outb(SM_CTLPAGESW, SM_REGINDEX);	/* Switch to watchdog control page */
+	outb(SM_WATCHPAGE, SM_REGINDEX);
+	/* Switch to watchdog control page */
+	outb(SM_CTLPAGESW, SM_REGINDEX);
 	outb(SM_CTLPAGE, SM_DATAIO);
 }
 
@@ -192,7 +196,7 @@ static void supermicro_new_pre_start(unsigned int heartbeat)
 	outb(val, SM_DATAIO);
 
 	/* Write heartbeat interval to WDOG */
-	outb (SM_WATCHTIMER, SM_REGINDEX);
+	outb(SM_WATCHTIMER, SM_REGINDEX);
 	outb((heartbeat & 255), SM_DATAIO);
 
 	/* Make sure keyboard/mouse interrupts don't interfere */
@@ -277,7 +281,7 @@ EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
 
 int iTCO_vendor_check_noreboot_on(void)
 {
-	switch(vendorsupport) {
+	switch (vendorsupport) {
 	case SUPERMICRO_OLD_BOARD:
 		return 0;
 	default:
@@ -288,13 +292,13 @@ EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
 
 static int __init iTCO_vendor_init_module(void)
 {
-	printk (KERN_INFO PFX "vendor-support=%d\n", vendorsupport);
+	printk(KERN_INFO PFX "vendor-support=%d\n", vendorsupport);
 	return 0;
 }
 
 static void __exit iTCO_vendor_exit_module(void)
 {
-	printk (KERN_INFO PFX "Module Unloaded\n");
+	printk(KERN_INFO PFX "Module Unloaded\n");
 }
 
 module_init(iTCO_vendor_init_module);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 95ba985bd34..bfb93bc2ca9 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -55,9 +55,9 @@
  */
 
 /* Module and version information */
-#define DRV_NAME        "iTCO_wdt"
-#define DRV_VERSION     "1.03"
-#define DRV_RELDATE     "30-Apr-2008"
+#define DRV_NAME	"iTCO_wdt"
+#define DRV_VERSION	"1.03"
+#define DRV_RELDATE	"30-Apr-2008"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -66,7 +66,8 @@
 #include <linux/types.h>		/* For standard types (like size_t) */
 #include <linux/errno.h>		/* For the -ENODEV/... values */
 #include <linux/kernel.h>		/* For printk/panic/... */
-#include <linux/miscdevice.h>		/* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
+#include <linux/miscdevice.h>		/* For MODULE_ALIAS_MISCDEV
+							(WATCHDOG_MINOR) */
 #include <linux/watchdog.h>		/* For the watchdog specific items */
 #include <linux/init.h>			/* For __init/__exit/... */
 #include <linux/fs.h>			/* For file operations */
@@ -74,9 +75,10 @@
 #include <linux/pci.h>			/* For pci functions */
 #include <linux/ioport.h>		/* For io-port access */
 #include <linux/spinlock.h>		/* For spin_lock/spin_unlock/... */
+#include <linux/uaccess.h>		/* For copy_to_user/put_user/... */
+#include <linux/io.h>			/* For inb/outb/... */
 
-#include <asm/uaccess.h>		/* For copy_to_user/put_user/... */
-#include <asm/io.h>			/* For inb/outb/... */
+#include "iTCO_vendor.h"
 
 /* TCO related info */
 enum iTCO_chipsets {
@@ -105,7 +107,7 @@ enum iTCO_chipsets {
 	TCO_ICH9,	/* ICH9 */
 	TCO_ICH9R,	/* ICH9R */
 	TCO_ICH9DH,	/* ICH9DH */
-	TCO_ICH9DO,     /* ICH9DO */
+	TCO_ICH9DO,	/* ICH9DO */
 	TCO_631XESB,	/* 631xESB/632xESB */
 };
 
@@ -140,7 +142,7 @@ static struct {
 	{"ICH9DH", 2},
 	{"ICH9DO", 2},
 	{"631xESB/632xESB", 2},
-	{NULL,0}
+	{NULL, 0}
 };
 
 #define ITCO_PCI_DEVICE(dev, data) 	\
@@ -159,32 +161,32 @@ static struct {
  * functions that probably will be registered by other drivers.
  */
 static struct pci_device_id iTCO_wdt_pci_tbl[] = {
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0,	TCO_ICH    )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0,	TCO_ICH0   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0,	TCO_ICH2   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10,	TCO_ICH2M  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0,	TCO_ICH3   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12,	TCO_ICH3M  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0,	TCO_ICH4   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12,	TCO_ICH4M  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0,		TCO_CICH   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0,	TCO_ICH5   )},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0,	TCO_ICH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0,	TCO_ICH0)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0,	TCO_ICH2)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10,	TCO_ICH2M)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0,	TCO_ICH3)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12,	TCO_ICH3M)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0,	TCO_ICH4)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12,	TCO_ICH4M)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0,		TCO_CICH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0,	TCO_ICH5)},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB_1,		TCO_6300ESB)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0,		TCO_ICH6   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1,		TCO_ICH6M  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2,		TCO_ICH6W  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0,		TCO_ICH7   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1,		TCO_ICH7M  )},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0,		TCO_ICH6)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1,		TCO_ICH6M)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2,		TCO_ICH6W)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0,		TCO_ICH7)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1,		TCO_ICH7M)},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31,		TCO_ICH7MDH)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0,		TCO_ICH8   )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1,		TCO_ICH8ME )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2,		TCO_ICH8DH )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3,		TCO_ICH8DO )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4,		TCO_ICH8M  )},
-	{ ITCO_PCI_DEVICE(0x2918,				TCO_ICH9   )},
-	{ ITCO_PCI_DEVICE(0x2916,				TCO_ICH9R  )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2,		TCO_ICH9DH )},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4,           TCO_ICH9DO )},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0,		TCO_ICH8)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1,		TCO_ICH8ME)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2,		TCO_ICH8DH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3,		TCO_ICH8DO)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4,		TCO_ICH8M)},
+	{ ITCO_PCI_DEVICE(0x2918,				TCO_ICH9)},
+	{ ITCO_PCI_DEVICE(0x2916,				TCO_ICH9R)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2,		TCO_ICH9DH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4,		TCO_ICH9DO)},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0,		TCO_631XESB)},
 	{ ITCO_PCI_DEVICE(0x2671,				TCO_631XESB)},
 	{ ITCO_PCI_DEVICE(0x2672,				TCO_631XESB)},
@@ -203,13 +205,15 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = {
 	{ ITCO_PCI_DEVICE(0x267f,				TCO_631XESB)},
 	{ 0, },			/* End of list */
 };
-MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
+MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
 
 /* Address definitions for the TCO */
-#define	TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60	/* TCO base address                */
-#define	SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30	/* SMI Control and Enable Register */
+/* TCO base address */
+#define	TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
+/* SMI Control and Enable Register */
+#define	SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
 
-#define TCO_RLD		TCOBASE + 0x00	/* TCO Timer Reload and Current Value */
+#define TCO_RLD		TCOBASE + 0x00	/* TCO Timer Reload and Curr. Value */
 #define TCOv1_TMR	TCOBASE + 0x01	/* TCOv1 Timer Initial Value	*/
 #define	TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
 #define	TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
@@ -222,15 +226,21 @@ MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
 /* internal variables */
 static unsigned long is_active;
 static char expect_release;
-static struct {				/* this is private data for the iTCO_wdt device */
-	unsigned int iTCO_version;	/* TCO version/generation */
-	unsigned long ACPIBASE;		/* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */
-	unsigned long __iomem *gcs;	/* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2) */
-	spinlock_t io_lock;		/* the lock for io operations */
-	struct pci_dev *pdev;		/* the PCI-device */
+static struct {		/* this is private data for the iTCO_wdt device */
+	/* TCO version/generation */
+	unsigned int iTCO_version;
+	/* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */
+	unsigned long ACPIBASE;
+	/* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/
+	unsigned long __iomem *gcs;
+	/* the lock for io operations */
+	spinlock_t io_lock;
+	/* the PCI-device */
+	struct pci_dev *pdev;
 } iTCO_wdt_private;
 
-static struct platform_device *iTCO_wdt_platform_device;	/* the watchdog platform device */
+/* the watchdog platform device */
+static struct platform_device *iTCO_wdt_platform_device;
 
 /* module parameters */
 #define WATCHDOG_HEARTBEAT 30	/* 30 sec default heartbeat */
@@ -240,22 +250,9 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39 (TCO
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-/* iTCO Vendor Specific Support hooks */
-#ifdef CONFIG_ITCO_VENDOR_SUPPORT
-extern void iTCO_vendor_pre_start(unsigned long, unsigned int);
-extern void iTCO_vendor_pre_stop(unsigned long);
-extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int);
-extern void iTCO_vendor_pre_set_heartbeat(unsigned int);
-extern int iTCO_vendor_check_noreboot_on(void);
-#else
-#define iTCO_vendor_pre_start(acpibase, heartbeat)	{}
-#define iTCO_vendor_pre_stop(acpibase)			{}
-#define iTCO_vendor_pre_keepalive(acpibase,heartbeat)	{}
-#define iTCO_vendor_pre_set_heartbeat(heartbeat)	{}
-#define iTCO_vendor_check_noreboot_on()			1	/* 1=check noreboot; 0=don't check */
-#endif
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * Some TCO specific functions
@@ -369,11 +366,10 @@ static int iTCO_wdt_keepalive(void)
 	iTCO_vendor_pre_keepalive(iTCO_wdt_private.ACPIBASE, heartbeat);
 
 	/* Reload the timer by writing to the TCO Timer Counter register */
-	if (iTCO_wdt_private.iTCO_version == 2) {
+	if (iTCO_wdt_private.iTCO_version == 2)
 		outw(0x01, TCO_RLD);
-	} else if (iTCO_wdt_private.iTCO_version == 1) {
+	else if (iTCO_wdt_private.iTCO_version == 1)
 		outb(0x01, TCO_RLD);
-	}
 
 	spin_unlock(&iTCO_wdt_private.io_lock);
 	return 0;
@@ -425,7 +421,7 @@ static int iTCO_wdt_set_heartbeat(int t)
 	return 0;
 }
 
-static int iTCO_wdt_get_timeleft (int *time_left)
+static int iTCO_wdt_get_timeleft(int *time_left)
 {
 	unsigned int val16;
 	unsigned char val8;
@@ -454,7 +450,7 @@ static int iTCO_wdt_get_timeleft (int *time_left)
  *	/dev/watchdog handling
  */
 
-static int iTCO_wdt_open (struct inode *inode, struct file *file)
+static int iTCO_wdt_open(struct inode *inode, struct file *file)
 {
 	/* /dev/watchdog can only be opened once */
 	if (test_and_set_bit(0, &is_active))
@@ -468,7 +464,7 @@ static int iTCO_wdt_open (struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int iTCO_wdt_release (struct inode *inode, struct file *file)
+static int iTCO_wdt_release(struct inode *inode, struct file *file)
 {
 	/*
 	 *      Shut off the timer.
@@ -476,7 +472,8 @@ static int iTCO_wdt_release (struct inode *inode, struct file *file)
 	if (expect_release == 42) {
 		iTCO_wdt_stop();
 	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		iTCO_wdt_keepalive();
 	}
 	clear_bit(0, &is_active);
@@ -484,22 +481,23 @@ static int iTCO_wdt_release (struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t iTCO_wdt_write (struct file *file, const char __user *data,
-			      size_t len, loff_t * ppos)
+static ssize_t iTCO_wdt_write(struct file *file, const char __user *data,
+			      size_t len, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
 	if (len) {
 		if (!nowayout) {
 			size_t i;
 
-			/* note: just in case someone wrote the magic character
-			 * five months ago... */
+			/* note: just in case someone wrote the magic
+			   character five months ago... */
 			expect_release = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the
+			   magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_release = 42;
@@ -512,8 +510,8 @@ static ssize_t iTCO_wdt_write (struct file *file, const char __user *data,
 	return len;
 }
 
-static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
+static long iTCO_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int new_options, retval = -EINVAL;
 	int new_heartbeat;
@@ -528,64 +526,52 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-				sizeof (ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_KEEPALIVE:
-			iTCO_wdt_keepalive();
-			return 0;
-
-		case WDIOC_SETOPTIONS:
-		{
-			if (get_user(new_options, p))
-				return -EFAULT;
-
-			if (new_options & WDIOS_DISABLECARD) {
-				iTCO_wdt_stop();
-				retval = 0;
-			}
-
-			if (new_options & WDIOS_ENABLECARD) {
-				iTCO_wdt_keepalive();
-				iTCO_wdt_start();
-				retval = 0;
-			}
-
-			return retval;
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		if (get_user(new_options, p))
+			return -EFAULT;
+
+		if (new_options & WDIOS_DISABLECARD) {
+			iTCO_wdt_stop();
+			retval = 0;
 		}
-
-		case WDIOC_SETTIMEOUT:
-		{
-			if (get_user(new_heartbeat, p))
-				return -EFAULT;
-
-			if (iTCO_wdt_set_heartbeat(new_heartbeat))
-				return -EINVAL;
-
+		if (new_options & WDIOS_ENABLECARD) {
 			iTCO_wdt_keepalive();
-			/* Fall */
-		}
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, p);
-
-		case WDIOC_GETTIMELEFT:
-		{
-			int time_left;
-
-			if (iTCO_wdt_get_timeleft(&time_left))
-				return -EINVAL;
-
-			return put_user(time_left, p);
+			iTCO_wdt_start();
+			retval = 0;
 		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		iTCO_wdt_keepalive();
+		return 0;
 
-		default:
-			return -ENOTTY;
+	case WDIOC_SETTIMEOUT:
+	{
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (iTCO_wdt_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		iTCO_wdt_keepalive();
+		/* Fall */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	case WDIOC_GETTIMELEFT:
+	{
+		int time_left;
+		if (iTCO_wdt_get_timeleft(&time_left))
+			return -EINVAL;
+		return put_user(time_left, p);
+	}
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -594,12 +580,12 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
  */
 
 static const struct file_operations iTCO_wdt_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.write =	iTCO_wdt_write,
-	.ioctl =	iTCO_wdt_ioctl,
-	.open =		iTCO_wdt_open,
-	.release =	iTCO_wdt_release,
+	.owner =		THIS_MODULE,
+	.llseek =		no_llseek,
+	.write =		iTCO_wdt_write,
+	.unlocked_ioctl =	iTCO_wdt_ioctl,
+	.open =			iTCO_wdt_open,
+	.release =		iTCO_wdt_release,
 };
 
 static struct miscdevice iTCO_wdt_miscdev = {
@@ -612,7 +598,8 @@ static struct miscdevice iTCO_wdt_miscdev = {
  *	Init & exit routines
  */
 
-static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev)
+static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
+		const struct pci_device_id *ent, struct platform_device *dev)
 {
 	int ret;
 	u32 base_address;
@@ -632,17 +619,19 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device
 		pci_dev_put(pdev);
 		return -ENODEV;
 	}
-	iTCO_wdt_private.iTCO_version = iTCO_chipset_info[ent->driver_data].iTCO_version;
+	iTCO_wdt_private.iTCO_version =
+			iTCO_chipset_info[ent->driver_data].iTCO_version;
 	iTCO_wdt_private.ACPIBASE = base_address;
 	iTCO_wdt_private.pdev = pdev;
 
-	/* Get the Memory-Mapped GCS register, we need it for the NO_REBOOT flag (TCO v2) */
-	/* To get access to it you have to read RCBA from PCI Config space 0xf0
-	   and use it as base. GCS = RCBA + ICH6_GCS(0x3410). */
+	/* Get the Memory-Mapped GCS register, we need it for the
+	   NO_REBOOT flag (TCO v2). To get access to it you have to
+	   read RCBA from PCI Config space 0xf0 and use it as base.
+	   GCS = RCBA + ICH6_GCS(0x3410). */
 	if (iTCO_wdt_private.iTCO_version == 2) {
 		pci_read_config_dword(pdev, 0xf0, &base_address);
 		RCBA = base_address & 0xffffc000;
-		iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410),4);
+		iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410), 4);
 	}
 
 	/* Check chipset's NO_REBOOT bit */
@@ -657,8 +646,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device
 
 	/* Set the TCO_EN bit in SMI_EN register */
 	if (!request_region(SMI_EN, 4, "iTCO_wdt")) {
-		printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n",
-			SMI_EN );
+		printk(KERN_ERR PFX
+			"I/O address 0x%04lx already in use\n", SMI_EN);
 		ret = -EIO;
 		goto out;
 	}
@@ -667,18 +656,20 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device
 	outl(val32, SMI_EN);
 	release_region(SMI_EN, 4);
 
-	/* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */
-	if (!request_region (TCOBASE, 0x20, "iTCO_wdt")) {
-		printk (KERN_ERR PFX "I/O address 0x%04lx already in use\n",
+	/* The TCO I/O registers reside in a 32-byte range pointed to
+	   by the TCOBASE value */
+	if (!request_region(TCOBASE, 0x20, "iTCO_wdt")) {
+		printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n",
 			TCOBASE);
 		ret = -EIO;
 		goto out;
 	}
 
-	printk(KERN_INFO PFX "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n",
-		iTCO_chipset_info[ent->driver_data].name,
-		iTCO_chipset_info[ent->driver_data].iTCO_version,
-		TCOBASE);
+	printk(KERN_INFO PFX
+		"Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n",
+			iTCO_chipset_info[ent->driver_data].name,
+			iTCO_chipset_info[ent->driver_data].iTCO_version,
+			TCOBASE);
 
 	/* Clear out the (probably old) status */
 	outb(0, TCO1_STS);
@@ -687,27 +678,29 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device
 	/* Make sure the watchdog is not running */
 	iTCO_wdt_stop();
 
-	/* Check that the heartbeat value is within it's range ; if not reset to the default */
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
 	if (iTCO_wdt_set_heartbeat(heartbeat)) {
 		iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT);
-		printk(KERN_INFO PFX "heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using %d\n",
-			heartbeat);
+		printk(KERN_INFO PFX "heartbeat value must be 2 < heartbeat < 39 (TCO v1) or 613 (TCO v2), using %d\n",
+							heartbeat);
 	}
 
 	ret = misc_register(&iTCO_wdt_miscdev);
 	if (ret != 0) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto unreg_region;
 	}
 
-	printk (KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
-		heartbeat, nowayout);
+	printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
+							heartbeat, nowayout);
 
 	return 0;
 
 unreg_region:
-	release_region (TCOBASE, 0x20);
+	release_region(TCOBASE, 0x20);
 out:
 	if (iTCO_wdt_private.iTCO_version == 2)
 		iounmap(iTCO_wdt_private.gcs);
@@ -796,7 +789,8 @@ static int __init iTCO_wdt_init_module(void)
 	if (err)
 		return err;
 
-	iTCO_wdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+	iTCO_wdt_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(iTCO_wdt_platform_device)) {
 		err = PTR_ERR(iTCO_wdt_platform_device);
 		goto unreg_platform_driver;
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
index 4b89f401691..05a28106e8e 100644
--- a/drivers/watchdog/ib700wdt.c
+++ b/drivers/watchdog/ib700wdt.c
@@ -41,9 +41,9 @@
 #include <linux/spinlock.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 static struct platform_device *ibwdt_platform_device;
@@ -120,15 +120,16 @@ static int wd_margin = WD_TIMO;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 
 /*
  *	Watchdog Operations
  */
 
-static void
-ibwdt_ping(void)
+static void ibwdt_ping(void)
 {
 	spin_lock(&ibwdt_lock);
 
@@ -138,16 +139,14 @@ ibwdt_ping(void)
 	spin_unlock(&ibwdt_lock);
 }
 
-static void
-ibwdt_disable(void)
+static void ibwdt_disable(void)
 {
 	spin_lock(&ibwdt_lock);
 	outb_p(0, WDT_STOP);
 	spin_unlock(&ibwdt_lock);
 }
 
-static int
-ibwdt_set_heartbeat(int t)
+static int ibwdt_set_heartbeat(int t)
 {
 	int i;
 
@@ -165,8 +164,8 @@ ibwdt_set_heartbeat(int t)
  *	/dev/watchdog handling
  */
 
-static ssize_t
-ibwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t ibwdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -188,77 +187,71 @@ ibwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppo
 	return count;
 }
 
-static int
-ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg)
+static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int new_margin;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 
 	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "IB700 WDT",
 	};
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-	  if (copy_to_user(argp, &ident, sizeof(ident)))
-	    return -EFAULT;
-	  break;
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
 
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-	  return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-	  ibwdt_ping();
-	  break;
-
-	case WDIOC_SETTIMEOUT:
-	  if (get_user(new_margin, p))
-		  return -EFAULT;
-	  if (ibwdt_set_heartbeat(new_margin))
-		  return -EINVAL;
-	  ibwdt_ping();
-	  /* Fall */
-
-	case WDIOC_GETTIMEOUT:
-	  return put_user(wd_times[wd_margin], p);
+		return put_user(0, p);
 
 	case WDIOC_SETOPTIONS:
 	{
-	  int options, retval = -EINVAL;
+		int options, retval = -EINVAL;
 
-	  if (get_user(options, p))
-	    return -EFAULT;
+		if (get_user(options, p))
+			return -EFAULT;
 
-	  if (options & WDIOS_DISABLECARD) {
-	    ibwdt_disable();
-	    retval = 0;
-	  }
+		if (options & WDIOS_DISABLECARD) {
+			ibwdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			ibwdt_ping();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		ibwdt_ping();
+		break;
 
-	  if (options & WDIOS_ENABLECARD) {
-	    ibwdt_ping();
-	    retval = 0;
-	  }
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+		if (ibwdt_set_heartbeat(new_margin))
+			return -EINVAL;
+		ibwdt_ping();
+		/* Fall */
 
-	  return retval;
-	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(wd_times[wd_margin], p);
 
 	default:
-	  return -ENOTTY;
+		return -ENOTTY;
 	}
 	return 0;
 }
 
-static int
-ibwdt_open(struct inode *inode, struct file *file)
+static int ibwdt_open(struct inode *inode, struct file *file)
 {
-	if (test_and_set_bit(0, &ibwdt_is_open)) {
+	if (test_and_set_bit(0, &ibwdt_is_open))
 		return -EBUSY;
-	}
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
@@ -267,13 +260,13 @@ ibwdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int
-ibwdt_close(struct inode *inode, struct file *file)
+static int ibwdt_close(struct inode *inode, struct file *file)
 {
 	if (expect_close == 42) {
 		ibwdt_disable();
 	} else {
-		printk(KERN_CRIT PFX "WDT device closed unexpectedly.  WDT will not stop!\n");
+		printk(KERN_CRIT PFX
+		     "WDT device closed unexpectedly.  WDT will not stop!\n");
 		ibwdt_ping();
 	}
 	clear_bit(0, &ibwdt_is_open);
@@ -289,7 +282,7 @@ static const struct file_operations ibwdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= ibwdt_write,
-	.ioctl		= ibwdt_ioctl,
+	.unlocked_ioctl	= ibwdt_ioctl,
 	.open		= ibwdt_open,
 	.release	= ibwdt_close,
 };
@@ -310,21 +303,23 @@ static int __devinit ibwdt_probe(struct platform_device *dev)
 
 #if WDT_START != WDT_STOP
 	if (!request_region(WDT_STOP, 1, "IB700 WDT")) {
-		printk (KERN_ERR PFX "STOP method I/O %X is not available.\n", WDT_STOP);
+		printk(KERN_ERR PFX "STOP method I/O %X is not available.\n",
+								WDT_STOP);
 		res = -EIO;
 		goto out_nostopreg;
 	}
 #endif
 
 	if (!request_region(WDT_START, 1, "IB700 WDT")) {
-		printk (KERN_ERR PFX "START method I/O %X is not available.\n", WDT_START);
+		printk(KERN_ERR PFX "START method I/O %X is not available.\n",
+								WDT_START);
 		res = -EIO;
 		goto out_nostartreg;
 	}
 
 	res = misc_register(&ibwdt_miscdev);
 	if (res) {
-		printk (KERN_ERR PFX "failed to register misc device\n");
+		printk(KERN_ERR PFX "failed to register misc device\n");
 		goto out_nomisc;
 	}
 	return 0;
@@ -342,9 +337,9 @@ out_nostopreg:
 static int __devexit ibwdt_remove(struct platform_device *dev)
 {
 	misc_deregister(&ibwdt_miscdev);
-	release_region(WDT_START,1);
+	release_region(WDT_START, 1);
 #if WDT_START != WDT_STOP
-	release_region(WDT_STOP,1);
+	release_region(WDT_STOP, 1);
 #endif
 	return 0;
 }
@@ -369,13 +364,15 @@ static int __init ibwdt_init(void)
 {
 	int err;
 
-	printk(KERN_INFO PFX "WDT driver for IB700 single board computer initialising.\n");
+	printk(KERN_INFO PFX
+		"WDT driver for IB700 single board computer initialising.\n");
 
 	err = platform_driver_register(&ibwdt_driver);
 	if (err)
 		return err;
 
-	ibwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+	ibwdt_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(ibwdt_platform_device)) {
 		err = PTR_ERR(ibwdt_platform_device);
 		goto unreg_platform_driver;
diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c
index 94155f6136c..b82405cfb4c 100644
--- a/drivers/watchdog/ibmasr.c
+++ b/drivers/watchdog/ibmasr.c
@@ -19,9 +19,8 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/dmi.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 
 enum {
@@ -70,10 +69,13 @@ static char asr_expect_close;
 static unsigned int asr_type, asr_base, asr_length;
 static unsigned int asr_read_addr, asr_write_addr;
 static unsigned char asr_toggle_mask, asr_disable_mask;
+static spinlock_t asr_lock;
 
-static void asr_toggle(void)
+static void __asr_toggle(void)
 {
-	unsigned char reg = inb(asr_read_addr);
+	unsigned char reg;
+
+	reg = inb(asr_read_addr);
 
 	outb(reg & ~asr_toggle_mask, asr_write_addr);
 	reg = inb(asr_read_addr);
@@ -83,12 +85,21 @@ static void asr_toggle(void)
 
 	outb(reg & ~asr_toggle_mask, asr_write_addr);
 	reg = inb(asr_read_addr);
+	spin_unlock(&asr_lock);
+}
+
+static void asr_toggle(void)
+{
+	spin_lock(&asr_lock);
+	__asr_toggle();
+	spin_unlock(&asr_lock);
 }
 
 static void asr_enable(void)
 {
 	unsigned char reg;
 
+	spin_lock(&asr_lock);
 	if (asr_type == ASMTYPE_TOPAZ) {
 		/* asr_write_addr == asr_read_addr */
 		reg = inb(asr_read_addr);
@@ -99,17 +110,21 @@ static void asr_enable(void)
 		 * First make sure the hardware timer is reset by toggling
 		 * ASR hardware timer line.
 		 */
-		asr_toggle();
+		__asr_toggle();
 
 		reg = inb(asr_read_addr);
 		outb(reg & ~asr_disable_mask, asr_write_addr);
 	}
 	reg = inb(asr_read_addr);
+	spin_unlock(&asr_lock);
 }
 
 static void asr_disable(void)
 {
-	unsigned char reg = inb(asr_read_addr);
+	unsigned char reg;
+
+	spin_lock(&asr_lock);
+	reg = inb(asr_read_addr);
 
 	if (asr_type == ASMTYPE_TOPAZ)
 		/* asr_write_addr == asr_read_addr */
@@ -122,6 +137,7 @@ static void asr_disable(void)
 		outb(reg | asr_disable_mask, asr_write_addr);
 	}
 	reg = inb(asr_read_addr);
+	spin_unlock(&asr_lock);
 }
 
 static int __init asr_get_base_address(void)
@@ -133,7 +149,8 @@ static int __init asr_get_base_address(void)
 
 	switch (asr_type) {
 	case ASMTYPE_TOPAZ:
-		/* SELECT SuperIO CHIP FOR QUERYING (WRITE 0x07 TO BOTH 0x2E and 0x2F) */
+		/* SELECT SuperIO CHIP FOR QUERYING
+		   (WRITE 0x07 TO BOTH 0x2E and 0x2F) */
 		outb(0x07, 0x2e);
 		outb(0x07, 0x2f);
 
@@ -154,14 +171,26 @@ static int __init asr_get_base_address(void)
 
 	case ASMTYPE_JASPER:
 		type = "Jaspers ";
-
-		/* FIXME: need to use pci_config_lock here, but it's not exported */
+#if 0
+		u32 r;
+		/* Suggested fix */
+		pdev = pci_get_bus_and_slot(0, DEVFN(0x1f, 0));
+		if (pdev == NULL)
+			return -ENODEV;
+		pci_read_config_dword(pdev, 0x58, &r);
+		asr_base = r & 0xFFFE;
+		pci_dev_put(pdev);
+#else
+		/* FIXME: need to use pci_config_lock here,
+		   but it's not exported */
 
 /*		spin_lock_irqsave(&pci_config_lock, flags);*/
 
 		/* Select the SuperIO chip in the PCI I/O port register */
 		outl(0x8000f858, 0xcf8);
 
+		/* BUS 0, Slot 1F, fnc 0, offset 58 */
+
 		/*
 		 * Read the base address for the SuperIO chip.
 		 * Only the lower 16 bits are valid, but the address is word
@@ -170,7 +199,7 @@ static int __init asr_get_base_address(void)
 		asr_base = inl(0xcfc) & 0xfffe;
 
 /*		spin_unlock_irqrestore(&pci_config_lock, flags);*/
-
+#endif
 		asr_read_addr = asr_write_addr =
 			asr_base + JASPER_ASR_REG_OFFSET;
 		asr_toggle_mask = JASPER_ASR_TOGGLE_MASK;
@@ -241,66 +270,57 @@ static ssize_t asr_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static int asr_ioctl(struct inode *inode, struct file *file,
-		     unsigned int cmd, unsigned long arg)
+static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	static const struct watchdog_info ident = {
-		.options =	WDIOF_KEEPALIVEPING | 
+		.options =	WDIOF_KEEPALIVEPING |
 				WDIOF_MAGICCLOSE,
-		.identity =	"IBM ASR"
+		.identity =	"IBM ASR",
 	};
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int heartbeat;
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident)) ?
-				-EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_KEEPALIVE:
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			asr_disable();
+			retval = 0;
+		}
+		if (new_options & WDIOS_ENABLECARD) {
+			asr_enable();
 			asr_toggle();
-			return 0;
-
-		/*
-		 * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT
-		 * and WDIOC_GETTIMEOUT always returns 256.
-		 */
-		case WDIOC_GETTIMEOUT:
-			heartbeat = 256;
-			return put_user(heartbeat, p);
-
-		case WDIOC_SETOPTIONS: {
-			int new_options, retval = -EINVAL;
-
-			if (get_user(new_options, p))
-				return -EFAULT;
-
-			if (new_options & WDIOS_DISABLECARD) {
-				asr_disable();
-				retval = 0;
-			}
-
-			if (new_options & WDIOS_ENABLECARD) {
-				asr_enable();
-				asr_toggle();
-				retval = 0;
-			}
-
-			return retval;
+			retval = 0;
 		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		asr_toggle();
+		return 0;
+	/*
+	 * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT
+	 * and WDIOC_GETTIMEOUT always returns 256.
+	 */
+	case WDIOC_GETTIMEOUT:
+		heartbeat = 256;
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
 	}
-
-	return -ENOTTY;
 }
 
 static int asr_open(struct inode *inode, struct file *file)
 {
-	if(test_and_set_bit(0, &asr_is_open))
+	if (test_and_set_bit(0, &asr_is_open))
 		return -EBUSY;
 
 	asr_toggle();
@@ -314,7 +334,8 @@ static int asr_release(struct inode *inode, struct file *file)
 	if (asr_expect_close == 42)
 		asr_disable();
 	else {
-		printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+				"unexpected close, not stopping watchdog!\n");
 		asr_toggle();
 	}
 	clear_bit(0, &asr_is_open);
@@ -323,12 +344,12 @@ static int asr_release(struct inode *inode, struct file *file)
 }
 
 static const struct file_operations asr_fops = {
-	.owner =	THIS_MODULE,
-	.llseek	=	no_llseek,
-	.write =	asr_write,
-	.ioctl =	asr_ioctl,
-	.open =		asr_open,
-	.release =	asr_release,
+	.owner =		THIS_MODULE,
+	.llseek =		no_llseek,
+	.write =		asr_write,
+	.unlocked_ioctl =	asr_ioctl,
+	.open =			asr_open,
+	.release =		asr_release,
 };
 
 static struct miscdevice asr_miscdev = {
@@ -367,6 +388,8 @@ static int __init ibmasr_init(void)
 	if (!asr_type)
 		return -ENODEV;
 
+	spin_lock_init(&asr_lock);
+
 	rc = asr_get_base_address();
 	if (rc)
 		return rc;
@@ -395,7 +418,9 @@ module_init(ibmasr_init);
 module_exit(ibmasr_exit);
 
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 MODULE_DESCRIPTION("IBM Automatic Server Restart driver");
 MODULE_AUTHOR("Andrey Panin");
diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c
index 788245bdaa7..73c9e7992fe 100644
--- a/drivers/watchdog/indydog.c
+++ b/drivers/watchdog/indydog.c
@@ -1,7 +1,8 @@
 /*
  *	IndyDog	0.3	A Hardware Watchdog Device for SGI IP22
  *
- *	(c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved.
+ *	(c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -22,32 +23,42 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/sgi/mc.h>
 
 #define PFX "indydog: "
-static int indydog_alive;
+static unsigned long indydog_alive;
+static spinlock_t indydog_lock;
 
 #define WATCHDOG_TIMEOUT 30		/* 30 sec default timeout */
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static void indydog_start(void)
 {
-	u32 mc_ctrl0 = sgimc->cpuctrl0;
+	u32 mc_ctrl0;
 
+	spin_lock(&indydog_lock);
+	mc_ctrl0 = sgimc->cpuctrl0;
 	mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG;
 	sgimc->cpuctrl0 = mc_ctrl0;
+	spin_unlock(&indydog_lock);
 }
 
 static void indydog_stop(void)
 {
-	u32 mc_ctrl0 = sgimc->cpuctrl0;
+	u32 mc_ctrl0;
 
+	spin_lock(&indydog_lock);
+
+	mc_ctrl0 = sgimc->cpuctrl0;
 	mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG;
 	sgimc->cpuctrl0 = mc_ctrl0;
+	spin_unlock(&indydog_lock);
 
 	printk(KERN_INFO PFX "Stopped watchdog timer.\n");
 }
@@ -62,7 +73,7 @@ static void indydog_ping(void)
  */
 static int indydog_open(struct inode *inode, struct file *file)
 {
-	if (indydog_alive)
+	if (test_and_set_bit(0, &indydog_alive))
 		return -EBUSY;
 
 	if (nowayout)
@@ -84,23 +95,21 @@ static int indydog_release(struct inode *inode, struct file *file)
 	 * Lock it in if it's a module and we defined ...NOWAYOUT */
 	if (!nowayout)
 		indydog_stop();		/* Turn the WDT off */
-
-	indydog_alive = 0;
-
+	clear_bit(0, &indydog_alive);
 	return 0;
 }
 
-static ssize_t indydog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t indydog_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	/* Refresh the timer. */
-	if (len) {
+	if (len)
 		indydog_ping();
-	}
 	return len;
 }
 
-static int indydog_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long indydog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int options, retval = -EINVAL;
 	static struct watchdog_info ident = {
@@ -111,42 +120,40 @@ static int indydog_ioctl(struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			if (copy_to_user((struct watchdog_info *)arg,
-					 &ident, sizeof(ident)))
-				return -EFAULT;
-			return 0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0,(int *)arg);
-		case WDIOC_KEEPALIVE:
-			indydog_ping();
-			return 0;
-		case WDIOC_GETTIMEOUT:
-			return put_user(WATCHDOG_TIMEOUT,(int *)arg);
-		case WDIOC_SETOPTIONS:
-		{
-			if (get_user(options, (int *)arg))
-				return -EFAULT;
-
-			if (options & WDIOS_DISABLECARD) {
-				indydog_stop();
-				retval = 0;
-			}
-
-			if (options & WDIOS_ENABLECARD) {
-				indydog_start();
-				retval = 0;
-			}
-
-			return retval;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user((struct watchdog_info *)arg,
+				 &ident, sizeof(ident)))
+			return -EFAULT;
+		return 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int *)arg);
+	case WDIOC_SETOPTIONS:
+	{
+		if (get_user(options, (int *)arg))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			indydog_stop();
+			retval = 0;
 		}
+		if (options & WDIOS_ENABLECARD) {
+			indydog_start();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		indydog_ping();
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(WATCHDOG_TIMEOUT, (int *)arg);
+	default:
+		return -ENOTTY;
 	}
 }
 
-static int indydog_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int indydog_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
 	if (code == SYS_DOWN || code == SYS_HALT)
 		indydog_stop();		/* Turn the WDT off */
@@ -158,7 +165,7 @@ static const struct file_operations indydog_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= indydog_write,
-	.ioctl		= indydog_ioctl,
+	.unlocked_ioctl	= indydog_ioctl,
 	.open		= indydog_open,
 	.release	= indydog_release,
 };
@@ -180,17 +187,20 @@ static int __init watchdog_init(void)
 {
 	int ret;
 
+	spin_lock_init(&indydog_lock);
+
 	ret = register_reboot_notifier(&indydog_notifier);
 	if (ret) {
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		return ret;
 	}
 
 	ret = misc_register(&indydog_miscdev);
 	if (ret) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		unregister_reboot_notifier(&indydog_notifier);
 		return ret;
 	}
diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c
index bbbd91af754..96eb2cbe587 100644
--- a/drivers/watchdog/iop_wdt.c
+++ b/drivers/watchdog/iop_wdt.c
@@ -32,11 +32,12 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 static unsigned long wdt_status;
 static unsigned long boot_status;
+static spinlock_t wdt_lock;
 
 #define WDT_IN_USE		0
 #define WDT_OK_TO_CLOSE		1
@@ -68,8 +69,10 @@ static void wdt_enable(void)
 	/* Arm and enable the Timer to starting counting down from 0xFFFF.FFFF
 	 * Takes approx. 10.7s to timeout
 	 */
+	spin_lock(&wdt_lock);
 	write_wdtcr(IOP_WDTCR_EN_ARM);
 	write_wdtcr(IOP_WDTCR_EN);
+	spin_unlock(&wdt_lock);
 }
 
 /* returns 0 if the timer was successfully disabled */
@@ -77,9 +80,11 @@ static int wdt_disable(void)
 {
 	/* Stop Counting */
 	if (wdt_supports_disable()) {
+		spin_lock(&wdt_lock);
 		write_wdtcr(IOP_WDTCR_DIS_ARM);
 		write_wdtcr(IOP_WDTCR_DIS);
 		clear_bit(WDT_ENABLED, &wdt_status);
+		spin_unlock(&wdt_lock);
 		printk(KERN_INFO "WATCHDOG: Disabled\n");
 		return 0;
 	} else
@@ -92,16 +97,12 @@ static int iop_wdt_open(struct inode *inode, struct file *file)
 		return -EBUSY;
 
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-
 	wdt_enable();
-
 	set_bit(WDT_ENABLED, &wdt_status);
-
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t
-iop_wdt_write(struct file *file, const char *data, size_t len,
+static ssize_t iop_wdt_write(struct file *file, const char *data, size_t len,
 		  loff_t *ppos)
 {
 	if (len) {
@@ -121,46 +122,35 @@ iop_wdt_write(struct file *file, const char *data, size_t len,
 		}
 		wdt_enable();
 	}
-
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
 	.identity = "iop watchdog",
 };
 
-static int
-iop_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		  unsigned long arg)
+static long iop_wdt_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	int options;
 	int ret = -ENOTTY;
+	int __user *argp = (int __user *)arg;
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user
-		    ((struct watchdog_info *)arg, &ident, sizeof ident))
+		if (copy_to_user(argp, &ident, sizeof ident))
 			ret = -EFAULT;
 		else
 			ret = 0;
 		break;
 
 	case WDIOC_GETSTATUS:
-		ret = put_user(0, (int *)arg);
+		ret = put_user(0, argp);
 		break;
 
 	case WDIOC_GETBOOTSTATUS:
-		ret = put_user(boot_status, (int *)arg);
-		break;
-
-	case WDIOC_GETTIMEOUT:
-		ret = put_user(iop_watchdog_timeout(), (int *)arg);
-		break;
-
-	case WDIOC_KEEPALIVE:
-		wdt_enable();
-		ret = 0;
+		ret = put_user(boot_status, argp);
 		break;
 
 	case WDIOC_SETOPTIONS:
@@ -177,14 +167,21 @@ iop_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			} else
 				ret = 0;
 		}
-
 		if (options & WDIOS_ENABLECARD) {
 			wdt_enable();
 			ret = 0;
 		}
 		break;
-	}
 
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(iop_watchdog_timeout(), argp);
+		break;
+	}
 	return ret;
 }
 
@@ -214,7 +211,7 @@ static const struct file_operations iop_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = iop_wdt_write,
-	.ioctl = iop_wdt_ioctl,
+	.unlocked_ioctl = iop_wdt_ioctl,
 	.open = iop_wdt_open,
 	.release = iop_wdt_release,
 };
@@ -229,10 +226,8 @@ static int __init iop_wdt_init(void)
 {
 	int ret;
 
-	ret = misc_register(&iop_wdt_miscdev);
-	if (ret == 0)
-		printk("iop watchdog timer: timeout %lu sec\n",
-		       iop_watchdog_timeout());
+	spin_lock_init(&wdt_lock);
+
 
 	/* check if the reset was caused by the watchdog timer */
 	boot_status = (read_rcsr() & IOP_RCSR_WDT) ? WDIOF_CARDRESET : 0;
@@ -242,6 +237,13 @@ static int __init iop_wdt_init(void)
 	 */
 	write_wdtsr(IOP13XX_WDTCR_IB_RESET);
 
+	/* Register after we have the device set up so we cannot race
+	   with an open */
+	ret = misc_register(&iop_wdt_miscdev);
+	if (ret == 0)
+		printk(KERN_INFO "iop watchdog timer: timeout %lu sec\n",
+		       iop_watchdog_timeout());
+
 	return ret;
 }
 
diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
index 445b7e81211..2270ee07c01 100644
--- a/drivers/watchdog/it8712f_wdt.c
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -30,9 +30,8 @@
 #include <linux/fs.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #define NAME "it8712f_wdt"
 
@@ -50,7 +49,7 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
 
-static struct semaphore it8712f_wdt_sem;
+static unsigned long wdt_open;
 static unsigned expect_close;
 static spinlock_t io_lock;
 static unsigned char revision;
@@ -86,22 +85,19 @@ static unsigned short address;
 #define WDT_OUT_PWROK	0x10
 #define WDT_OUT_KRST	0x40
 
-static int
-superio_inb(int reg)
+static int superio_inb(int reg)
 {
 	outb(reg, REG);
 	return inb(VAL);
 }
 
-static void
-superio_outb(int val, int reg)
+static void superio_outb(int val, int reg)
 {
 	outb(reg, REG);
 	outb(val, VAL);
 }
 
-static int
-superio_inw(int reg)
+static int superio_inw(int reg)
 {
 	int val;
 	outb(reg++, REG);
@@ -111,15 +107,13 @@ superio_inw(int reg)
 	return val;
 }
 
-static inline void
-superio_select(int ldn)
+static inline void superio_select(int ldn)
 {
 	outb(LDN, REG);
 	outb(ldn, VAL);
 }
 
-static inline void
-superio_enter(void)
+static inline void superio_enter(void)
 {
 	spin_lock(&io_lock);
 	outb(0x87, REG);
@@ -128,22 +122,19 @@ superio_enter(void)
 	outb(0x55, REG);
 }
 
-static inline void
-superio_exit(void)
+static inline void superio_exit(void)
 {
 	outb(0x02, REG);
 	outb(0x02, VAL);
 	spin_unlock(&io_lock);
 }
 
-static inline void
-it8712f_wdt_ping(void)
+static inline void it8712f_wdt_ping(void)
 {
 	inb(address);
 }
 
-static void
-it8712f_wdt_update_margin(void)
+static void it8712f_wdt_update_margin(void)
 {
 	int config = WDT_OUT_KRST | WDT_OUT_PWROK;
 	int units = margin;
@@ -165,8 +156,7 @@ it8712f_wdt_update_margin(void)
 	superio_outb(units, WDT_TIMEOUT);
 }
 
-static int
-it8712f_wdt_get_status(void)
+static int it8712f_wdt_get_status(void)
 {
 	if (superio_inb(WDT_CONTROL) & 0x01)
 		return WDIOF_CARDRESET;
@@ -174,8 +164,7 @@ it8712f_wdt_get_status(void)
 		return 0;
 }
 
-static void
-it8712f_wdt_enable(void)
+static void it8712f_wdt_enable(void)
 {
 	printk(KERN_DEBUG NAME ": enabling watchdog timer\n");
 	superio_enter();
@@ -190,8 +179,7 @@ it8712f_wdt_enable(void)
 	it8712f_wdt_ping();
 }
 
-static void
-it8712f_wdt_disable(void)
+static void it8712f_wdt_disable(void)
 {
 	printk(KERN_DEBUG NAME ": disabling watchdog timer\n");
 
@@ -207,8 +195,7 @@ it8712f_wdt_disable(void)
 	superio_exit();
 }
 
-static int
-it8712f_wdt_notify(struct notifier_block *this,
+static int it8712f_wdt_notify(struct notifier_block *this,
 		    unsigned long code, void *unused)
 {
 	if (code == SYS_HALT || code == SYS_POWER_OFF)
@@ -222,9 +209,8 @@ static struct notifier_block it8712f_wdt_notifier = {
 	.notifier_call = it8712f_wdt_notify,
 };
 
-static ssize_t
-it8712f_wdt_write(struct file *file, const char __user *data,
-	size_t len, loff_t *ppos)
+static ssize_t it8712f_wdt_write(struct file *file, const char __user *data,
+					size_t len, loff_t *ppos)
 {
 	/* check for a magic close character */
 	if (len) {
@@ -235,7 +221,7 @@ it8712f_wdt_write(struct file *file, const char __user *data,
 		expect_close = 0;
 		for (i = 0; i < len; ++i) {
 			char c;
-			if (get_user(c, data+i))
+			if (get_user(c, data + i))
 				return -EFAULT;
 			if (c == 'V')
 				expect_close = 42;
@@ -245,9 +231,8 @@ it8712f_wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int
-it8712f_wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -259,8 +244,6 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file,
 	int value;
 
 	switch (cmd) {
-	default:
-		return -ENOTTY;
 	case WDIOC_GETSUPPORT:
 		if (copy_to_user(argp, &ident, sizeof(ident)))
 			return -EFAULT;
@@ -299,22 +282,21 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file,
 		if (put_user(margin, p))
 			return -EFAULT;
 		return 0;
+	default:
+		return -ENOTTY;
 	}
 }
 
-static int
-it8712f_wdt_open(struct inode *inode, struct file *file)
+static int it8712f_wdt_open(struct inode *inode, struct file *file)
 {
 	/* only allow one at a time */
-	if (down_trylock(&it8712f_wdt_sem))
+	if (test_and_set_bit(0, &wdt_open))
 		return -EBUSY;
 	it8712f_wdt_enable();
-
 	return nonseekable_open(inode, file);
 }
 
-static int
-it8712f_wdt_release(struct inode *inode, struct file *file)
+static int it8712f_wdt_release(struct inode *inode, struct file *file)
 {
 	if (expect_close != 42) {
 		printk(KERN_WARNING NAME
@@ -324,7 +306,7 @@ it8712f_wdt_release(struct inode *inode, struct file *file)
 		it8712f_wdt_disable();
 	}
 	expect_close = 0;
-	up(&it8712f_wdt_sem);
+	clear_bit(0, &wdt_open);
 
 	return 0;
 }
@@ -333,7 +315,7 @@ static const struct file_operations it8712f_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = it8712f_wdt_write,
-	.ioctl = it8712f_wdt_ioctl,
+	.unlocked_ioctl = it8712f_wdt_ioctl,
 	.open = it8712f_wdt_open,
 	.release = it8712f_wdt_release,
 };
@@ -344,8 +326,7 @@ static struct miscdevice it8712f_wdt_miscdev = {
 	.fops = &it8712f_wdt_fops,
 };
 
-static int __init
-it8712f_wdt_find(unsigned short *address)
+static int __init it8712f_wdt_find(unsigned short *address)
 {
 	int err = -ENODEV;
 	int chip_type;
@@ -387,8 +368,7 @@ exit:
 	return err;
 }
 
-static int __init
-it8712f_wdt_init(void)
+static int __init it8712f_wdt_init(void)
 {
 	int err = 0;
 
@@ -404,8 +384,6 @@ it8712f_wdt_init(void)
 
 	it8712f_wdt_disable();
 
-	sema_init(&it8712f_wdt_sem, 1);
-
 	err = register_reboot_notifier(&it8712f_wdt_notifier);
 	if (err) {
 		printk(KERN_ERR NAME ": unable to register reboot notifier\n");
@@ -430,8 +408,7 @@ out:
 	return err;
 }
 
-static void __exit
-it8712f_wdt_exit(void)
+static void __exit it8712f_wdt_exit(void)
 {
 	misc_deregister(&it8712f_wdt_miscdev);
 	unregister_reboot_notifier(&it8712f_wdt_notifier);
diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c
index dc7548dcaf3..4f4b35a20d8 100644
--- a/drivers/watchdog/ixp2000_wdt.c
+++ b/drivers/watchdog/ixp2000_wdt.c
@@ -25,42 +25,44 @@
 #include <linux/watchdog.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
-
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 static unsigned int heartbeat = 60;	/* (secs) Default is 1 minute */
 static unsigned long wdt_status;
+static spinlock_t wdt_lock;
 
 #define	WDT_IN_USE		0
 #define	WDT_OK_TO_CLOSE		1
 
 static unsigned long wdt_tick_rate;
 
-static void
-wdt_enable(void)
+static void wdt_enable(void)
 {
+	spin_lock(&wdt_lock);
 	ixp2000_reg_write(IXP2000_RESET0, *(IXP2000_RESET0) | WDT_RESET_ENABLE);
 	ixp2000_reg_write(IXP2000_TWDE, WDT_ENABLE);
 	ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate);
 	ixp2000_reg_write(IXP2000_T4_CTL, TIMER_DIVIDER_256 | TIMER_ENABLE);
+	spin_unlock(&wdt_lock);
 }
 
-static void
-wdt_disable(void)
+static void wdt_disable(void)
 {
+	spin_lock(&wdt_lock);
 	ixp2000_reg_write(IXP2000_T4_CTL, 0);
+	spin_unlock(&wdt_lock);
 }
 
-static void
-wdt_keepalive(void)
+static void wdt_keepalive(void)
 {
+	spin_lock(&wdt_lock);
 	ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate);
+	spin_unlock(&wdt_lock);
 }
 
-static int
-ixp2000_wdt_open(struct inode *inode, struct file *file)
+static int ixp2000_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
@@ -72,8 +74,8 @@ ixp2000_wdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t
-ixp2000_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t ixp2000_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	if (len) {
 		if (!nowayout) {
@@ -103,9 +105,8 @@ static struct watchdog_info ident = {
 	.identity	= "IXP2000 Watchdog",
 };
 
-static int
-ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-			unsigned long arg)
+static long ixp2000_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
@@ -124,6 +125,11 @@ ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ret = put_user(0, (int *)arg);
 		break;
 
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
 	case WDIOC_SETTIMEOUT:
 		ret = get_user(time, (int *)arg);
 		if (ret)
@@ -141,26 +147,18 @@ ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	case WDIOC_GETTIMEOUT:
 		ret = put_user(heartbeat, (int *)arg);
 		break;
-
-	case WDIOC_KEEPALIVE:
-		wdt_enable();
-		ret = 0;
-		break;
 	}
 
 	return ret;
 }
 
-static int
-ixp2000_wdt_release(struct inode *inode, struct file *file)
+static int ixp2000_wdt_release(struct inode *inode, struct file *file)
 {
-	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
 		wdt_disable();
-	} else {
+	else
 		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
 					"timer will not stop\n");
-	}
-
 	clear_bit(WDT_IN_USE, &wdt_status);
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
 
@@ -168,18 +166,16 @@ ixp2000_wdt_release(struct inode *inode, struct file *file)
 }
 
 
-static const struct file_operations ixp2000_wdt_fops =
-{
+static const struct file_operations ixp2000_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= ixp2000_wdt_write,
-	.ioctl		= ixp2000_wdt_ioctl,
+	.unlocked_ioctl	= ixp2000_wdt_ioctl,
 	.open		= ixp2000_wdt_open,
 	.release	= ixp2000_wdt_release,
 };
 
-static struct miscdevice ixp2000_wdt_miscdev =
-{
+static struct miscdevice ixp2000_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &ixp2000_wdt_fops,
@@ -191,9 +187,8 @@ static int __init ixp2000_wdt_init(void)
 		printk(KERN_INFO "Unable to use IXP2000 watchdog due to IXP2800 erratum #25.\n");
 		return -EIO;
 	}
-
 	wdt_tick_rate = (*IXP2000_T1_CLD * HZ) / 256;
-
+	spin_lock_init(&wdt_lock);
 	return misc_register(&ixp2000_wdt_miscdev);
 }
 
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index 5864bb865cf..8302ef005be 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -22,48 +22,47 @@
 #include <linux/watchdog.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
-
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 static int heartbeat = 60;	/* (secs) Default is 1 minute */
 static unsigned long wdt_status;
 static unsigned long boot_status;
+static DEFINE_SPINLOCK(wdt_lock);
 
 #define WDT_TICK_RATE (IXP4XX_PERIPHERAL_BUS_CLOCK * 1000000UL)
 
 #define	WDT_IN_USE		0
 #define	WDT_OK_TO_CLOSE		1
 
-static void
-wdt_enable(void)
+static void wdt_enable(void)
 {
+	spin_lock(&wdt_lock);
 	*IXP4XX_OSWK = IXP4XX_WDT_KEY;
 	*IXP4XX_OSWE = 0;
 	*IXP4XX_OSWT = WDT_TICK_RATE * heartbeat;
 	*IXP4XX_OSWE = IXP4XX_WDT_COUNT_ENABLE | IXP4XX_WDT_RESET_ENABLE;
 	*IXP4XX_OSWK = 0;
+	spin_unlock(&wdt_lock);
 }
 
-static void
-wdt_disable(void)
+static void wdt_disable(void)
 {
+	spin_lock(&wdt_lock);
 	*IXP4XX_OSWK = IXP4XX_WDT_KEY;
 	*IXP4XX_OSWE = 0;
 	*IXP4XX_OSWK = 0;
+	spin_unlock(&wdt_lock);
 }
 
-static int
-ixp4xx_wdt_open(struct inode *inode, struct file *file)
+static int ixp4xx_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
 
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-
 	wdt_enable();
-
 	return nonseekable_open(inode, file);
 }
 
@@ -87,7 +86,6 @@ ixp4xx_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
 		}
 		wdt_enable();
 	}
-
 	return len;
 }
 
@@ -98,9 +96,8 @@ static struct watchdog_info ident = {
 };
 
 
-static int
-ixp4xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-			unsigned long arg)
+static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
@@ -119,6 +116,11 @@ ixp4xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ret = put_user(boot_status, (int *)arg);
 		break;
 
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
 	case WDIOC_SETTIMEOUT:
 		ret = get_user(time, (int *)arg);
 		if (ret)
@@ -136,25 +138,17 @@ ixp4xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	case WDIOC_GETTIMEOUT:
 		ret = put_user(heartbeat, (int *)arg);
 		break;
-
-	case WDIOC_KEEPALIVE:
-		wdt_enable();
-		ret = 0;
-		break;
 	}
 	return ret;
 }
 
-static int
-ixp4xx_wdt_release(struct inode *inode, struct file *file)
+static int ixp4xx_wdt_release(struct inode *inode, struct file *file)
 {
-	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
 		wdt_disable();
-	} else {
+	else
 		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
 					"timer will not stop\n");
-	}
-
 	clear_bit(WDT_IN_USE, &wdt_status);
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
 
@@ -162,18 +156,16 @@ ixp4xx_wdt_release(struct inode *inode, struct file *file)
 }
 
 
-static const struct file_operations ixp4xx_wdt_fops =
-{
+static const struct file_operations ixp4xx_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= ixp4xx_wdt_write,
-	.ioctl		= ixp4xx_wdt_ioctl,
+	.unlocked_ioctl	= ixp4xx_wdt_ioctl,
 	.open		= ixp4xx_wdt_open,
 	.release	= ixp4xx_wdt_release,
 };
 
-static struct miscdevice ixp4xx_wdt_miscdev =
-{
+static struct miscdevice ixp4xx_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &ixp4xx_wdt_fops,
@@ -186,19 +178,18 @@ static int __init ixp4xx_wdt_init(void)
 
 	asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :);
 	if (!(processor_id & 0xf) && !cpu_is_ixp46x()) {
-		printk("IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected - "
-			"watchdog disabled\n");
+		printk(KERN_ERR "IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected"
+			" - watchdog disabled\n");
 
 		return -ENODEV;
 	}
-
-	ret = misc_register(&ixp4xx_wdt_miscdev);
-	if (ret == 0)
-		printk("IXP4xx Watchdog Timer: heartbeat %d sec\n", heartbeat);
-
+	spin_lock_init(&wdt_lock);
 	boot_status = (*IXP4XX_OSST & IXP4XX_OSST_TIMER_WARM_RESET) ?
 			WDIOF_CARDRESET : 0;
-
+	ret = misc_register(&ixp4xx_wdt_miscdev);
+	if (ret == 0)
+		printk(KERN_INFO "IXP4xx Watchdog Timer: heartbeat %d sec\n",
+			heartbeat);
 	return ret;
 }
 
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index df5a6b811cc..0b798fdaa37 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -19,10 +19,9 @@
 #include <linux/platform_device.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/arch/regs-timer.h>
-
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <mach/regs-timer.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
 #define WDT_MAX_TIME		171	/* seconds */
@@ -31,38 +30,44 @@ static int wdt_time = WDT_DEFAULT_TIME;
 static int nowayout = WATCHDOG_NOWAYOUT;
 
 module_param(wdt_time, int, 0);
-MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+					__MODULE_STRING(WDT_DEFAULT_TIME) ")");
 
 #ifdef CONFIG_WATCHDOG_NOWAYOUT
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 #endif
 
 
 static unsigned long ks8695wdt_busy;
+static spinlock_t ks8695_lock;
 
 /* ......................................................................... */
 
 /*
  * Disable the watchdog.
  */
-static void inline ks8695_wdt_stop(void)
+static inline void ks8695_wdt_stop(void)
 {
 	unsigned long tmcon;
 
+	spin_lock(&ks8695_lock);
 	/* disable timer0 */
 	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
 	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	spin_unlock(&ks8695_lock);
 }
 
 /*
  * Enable and reset the watchdog.
  */
-static void inline ks8695_wdt_start(void)
+static inline void ks8695_wdt_start(void)
 {
 	unsigned long tmcon;
 	unsigned long tval = wdt_time * CLOCK_TICK_RATE;
 
+	spin_lock(&ks8695_lock);
 	/* disable timer0 */
 	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
 	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
@@ -73,19 +78,22 @@ static void inline ks8695_wdt_start(void)
 	/* re-enable timer0 */
 	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
 	__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	spin_unlock(&ks8695_lock);
 }
 
 /*
  * Reload the watchdog timer.  (ie, pat the watchdog)
  */
-static void inline ks8695_wdt_reload(void)
+static inline void ks8695_wdt_reload(void)
 {
 	unsigned long tmcon;
 
+	spin_lock(&ks8695_lock);
 	/* disable, then re-enable timer0 */
 	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
 	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
 	__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	spin_unlock(&ks8695_lock);
 }
 
 /*
@@ -102,7 +110,8 @@ static int ks8695_wdt_settimeout(int new_time)
 	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
 		return -EINVAL;
 
-	/* Set new watchdog time. It will be used when ks8695_wdt_start() is called. */
+	/* Set new watchdog time. It will be used when
+	   ks8695_wdt_start() is called. */
 	wdt_time = new_time;
 	return 0;
 }
@@ -128,9 +137,9 @@ static int ks8695_wdt_open(struct inode *inode, struct file *file)
  */
 static int ks8695_wdt_close(struct inode *inode, struct file *file)
 {
+	/* Disable the watchdog when file is closed */
 	if (!nowayout)
-		ks8695_wdt_stop();	/* Disable the watchdog when file is closed */
-
+		ks8695_wdt_stop();
 	clear_bit(0, &ks8695wdt_busy);
 	return 0;
 }
@@ -143,60 +152,52 @@ static struct watchdog_info ks8695_wdt_info = {
 /*
  * Handle commands from user-space.
  */
-static int ks8695_wdt_ioctl(struct inode *inode, struct file *file,
-		unsigned int cmd, unsigned long arg)
+static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_value;
 
-	switch(cmd) {
-		case WDIOC_KEEPALIVE:
-			ks8695_wdt_reload();	/* pat the watchdog */
-			return 0;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ks8695_wdt_info, sizeof(ks8695_wdt_info)) ? -EFAULT : 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_value, p))
-				return -EFAULT;
-
-			if (ks8695_wdt_settimeout(new_value))
-				return -EINVAL;
-
-			/* Enable new time value */
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ks8695_wdt_info,
+					sizeof(ks8695_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (new_value & WDIOS_DISABLECARD)
+			ks8695_wdt_stop();
+		if (new_value & WDIOS_ENABLECARD)
 			ks8695_wdt_start();
-
-			/* Return current value */
-			return put_user(wdt_time, p);
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(wdt_time, p);
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_SETOPTIONS:
-			if (get_user(new_value, p))
-				return -EFAULT;
-
-			if (new_value & WDIOS_DISABLECARD)
-				ks8695_wdt_stop();
-			if (new_value & WDIOS_ENABLECARD)
-				ks8695_wdt_start();
-			return 0;
-
-		default:
-			return -ENOTTY;
+		return 0;
+	case WDIOC_KEEPALIVE:
+		ks8695_wdt_reload();	/* pat the watchdog */
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (ks8695_wdt_settimeout(new_value))
+			return -EINVAL;
+		/* Enable new time value */
+		ks8695_wdt_start();
+		/* Return current value */
+		return put_user(wdt_time, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdt_time, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
 /*
  * Pat the watchdog whenever device is written to.
  */
-static ssize_t ks8695_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t ks8695_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	ks8695_wdt_reload();		/* pat the watchdog */
 	return len;
@@ -207,7 +208,7 @@ static ssize_t ks8695_wdt_write(struct file *file, const char *data, size_t len,
 static const struct file_operations ks8695wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= ks8695_wdt_ioctl,
+	.unlocked_ioctl	= ks8695_wdt_ioctl,
 	.open		= ks8695_wdt_open,
 	.release	= ks8695_wdt_close,
 	.write		= ks8695_wdt_write,
@@ -231,7 +232,8 @@ static int __init ks8695wdt_probe(struct platform_device *pdev)
 	if (res)
 		return res;
 
-	printk("KS8695 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : "");
+	printk(KERN_INFO "KS8695 Watchdog Timer enabled (%d seconds%s)\n",
+				wdt_time, nowayout ? ", nowayout" : "");
 	return 0;
 }
 
@@ -285,12 +287,14 @@ static struct platform_driver ks8695wdt_driver = {
 
 static int __init ks8695_wdt_init(void)
 {
-	/* Check that the heartbeat value is within range; if not reset to the default */
+	spin_lock_init(&ks8695_lock);
+	/* Check that the heartbeat value is within range;
+	   if not reset to the default */
 	if (ks8695_wdt_settimeout(wdt_time)) {
 		ks8695_wdt_settimeout(WDT_DEFAULT_TIME);
-		pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n", wdt_time, WDT_MAX_TIME);
+		pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n",
+							wdt_time, WDT_MAX_TIME);
 	}
-
 	return platform_driver_register(&ks8695wdt_driver);
 }
 
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index 6905135a776..2dfc27559bf 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -40,9 +40,9 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 /* ports */
@@ -95,7 +95,9 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 #define PFX "machzwd"
 
@@ -114,7 +116,7 @@ static struct watchdog_info zf_info = {
  * 3 = GEN_SCI
  * defaults to GEN_RESET (0)
  */
-static int action = 0;
+static int action;
 module_param(action, int, 0);
 MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI");
 
@@ -123,10 +125,9 @@ static void zf_ping(unsigned long data);
 static int zf_action = GEN_RESET;
 static unsigned long zf_is_open;
 static char zf_expect_close;
-static DEFINE_SPINLOCK(zf_lock);
 static DEFINE_SPINLOCK(zf_port_lock);
 static DEFINE_TIMER(zf_timer, zf_ping, 0, 0);
-static unsigned long next_heartbeat = 0;
+static unsigned long next_heartbeat;
 
 
 /* timeout for user land heart beat (10 seconds) */
@@ -171,13 +172,13 @@ static inline void zf_set_control(unsigned short new)
 
 static inline void zf_set_timer(unsigned short new, unsigned char n)
 {
-	switch(n){
-		case WD1:
-			zf_writew(COUNTER_1, new);
-		case WD2:
-			zf_writeb(COUNTER_2, new > 0xff ? 0xff : new);
-		default:
-			return;
+	switch (n) {
+	case WD1:
+		zf_writew(COUNTER_1, new);
+	case WD2:
+		zf_writeb(COUNTER_2, new > 0xff ? 0xff : new);
+	default:
+		return;
 	}
 }
 
@@ -241,10 +242,8 @@ static void zf_ping(unsigned long data)
 
 	zf_writeb(COUNTER_2, 0xff);
 
-	if(time_before(jiffies, next_heartbeat)){
-
+	if (time_before(jiffies, next_heartbeat)) {
 		dprintk("time_before: %ld\n", next_heartbeat - jiffies);
-
 		/*
 		 * reset event is activated by transition from 0 to 1 on
 		 * RESET_WD1 bit and we assume that it is already zero...
@@ -261,24 +260,21 @@ static void zf_ping(unsigned long data)
 		spin_unlock_irqrestore(&zf_port_lock, flags);
 
 		mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO);
-	}else{
+	} else
 		printk(KERN_CRIT PFX ": I will reset your machine\n");
-	}
 }
 
 static ssize_t zf_write(struct file *file, const char __user *buf, size_t count,
 								loff_t *ppos)
 {
 	/* See if we got the magic character */
-	if(count){
-
+	if (count) {
 		/*
 		 * no need to check for close confirmation
 		 * no way to disable watchdog ;)
 		 */
 		if (!nowayout) {
 			size_t ofs;
-
 			/*
 			 * note: just in case someone wrote the magic character
 			 * five months ago...
@@ -286,11 +282,11 @@ static ssize_t zf_write(struct file *file, const char __user *buf, size_t count,
 			zf_expect_close = 0;
 
 			/* now scan */
-			for (ofs = 0; ofs != count; ofs++){
+			for (ofs = 0; ofs != count; ofs++) {
 				char c;
 				if (get_user(c, buf + ofs))
 					return -EFAULT;
-				if (c == 'V'){
+				if (c == 'V') {
 					zf_expect_close = 42;
 					dprintk("zf_expect_close = 42\n");
 				}
@@ -303,14 +299,11 @@ static ssize_t zf_write(struct file *file, const char __user *buf, size_t count,
 		 */
 		next_heartbeat = jiffies + ZF_USER_TIMEO;
 		dprintk("user ping at %ld\n", jiffies);
-
 	}
-
 	return count;
 }
 
-static int zf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long zf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -319,55 +312,38 @@ static int zf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		if (copy_to_user(argp, &zf_info, sizeof(zf_info)))
 			return -EFAULT;
 		break;
-
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);
-
 	case WDIOC_KEEPALIVE:
 		zf_ping(0);
 		break;
-
 	default:
 		return -ENOTTY;
 	}
-
 	return 0;
 }
 
 static int zf_open(struct inode *inode, struct file *file)
 {
-	spin_lock(&zf_lock);
-	if(test_and_set_bit(0, &zf_is_open)) {
-		spin_unlock(&zf_lock);
+	if (test_and_set_bit(0, &zf_is_open))
 		return -EBUSY;
-	}
-
 	if (nowayout)
 		__module_get(THIS_MODULE);
-
-	spin_unlock(&zf_lock);
-
 	zf_timer_on();
-
 	return nonseekable_open(inode, file);
 }
 
 static int zf_close(struct inode *inode, struct file *file)
 {
-	if(zf_expect_close == 42){
+	if (zf_expect_close == 42)
 		zf_timer_off();
-	} else {
+	else {
 		del_timer(&zf_timer);
 		printk(KERN_ERR PFX ": device file closed unexpectedly. Will not stop the WDT!\n");
 	}
-
-	spin_lock(&zf_lock);
 	clear_bit(0, &zf_is_open);
-	spin_unlock(&zf_lock);
-
 	zf_expect_close = 0;
-
 	return 0;
 }
 
@@ -378,23 +354,18 @@ static int zf_close(struct inode *inode, struct file *file)
 static int zf_notify_sys(struct notifier_block *this, unsigned long code,
 								void *unused)
 {
-	if(code == SYS_DOWN || code == SYS_HALT){
+	if (code == SYS_DOWN || code == SYS_HALT)
 		zf_timer_off();
-	}
-
 	return NOTIFY_DONE;
 }
 
-
-
-
 static const struct file_operations zf_fops = {
-	.owner          = THIS_MODULE,
-	.llseek         = no_llseek,
-	.write          = zf_write,
-	.ioctl          = zf_ioctl,
-	.open           = zf_open,
-	.release        = zf_close,
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= zf_write,
+	.unlocked_ioctl = zf_ioctl,
+	.open		= zf_open,
+	.release	= zf_close,
 };
 
 static struct miscdevice zf_miscdev = {
@@ -402,7 +373,7 @@ static struct miscdevice zf_miscdev = {
 	.name = "watchdog",
 	.fops = &zf_fops,
 };
- 
+
 
 /*
  * The device needs to learn about soft shutdowns in order to
@@ -423,22 +394,23 @@ static int __init zf_init(void)
 {
 	int ret;
 
-	printk(KERN_INFO PFX ": MachZ ZF-Logic Watchdog driver initializing.\n");
+	printk(KERN_INFO PFX
+		": MachZ ZF-Logic Watchdog driver initializing.\n");
 
 	ret = zf_get_ZFL_version();
-	if ((!ret) || (ret == 0xffff)) {
+	if (!ret || ret == 0xffff) {
 		printk(KERN_WARNING PFX ": no ZF-Logic found\n");
 		return -ENODEV;
 	}
 
-	if((action <= 3) && (action >= 0)){
-		zf_action = zf_action>>action;
-	} else
+	if (action <= 3 && action >= 0)
+		zf_action = zf_action >> action;
+	else
 		action = 0;
 
 	zf_show_action(action);
 
-	if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){
+	if (!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")) {
 		printk(KERN_ERR "cannot reserve I/O ports at %d\n",
 							ZF_IOBASE);
 		ret = -EBUSY;
@@ -446,14 +418,14 @@ static int __init zf_init(void)
 	}
 
 	ret = register_reboot_notifier(&zf_notifier);
-	if(ret){
+	if (ret) {
 		printk(KERN_ERR "can't register reboot notifier (err=%d)\n",
 									ret);
 		goto no_reboot;
 	}
 
 	ret = misc_register(&zf_miscdev);
-	if (ret){
+	if (ret) {
 		printk(KERN_ERR "can't misc_register on minor=%d\n",
 							WATCHDOG_MINOR);
 		goto no_misc;
diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c
index 1adf1d56027..407b025cb10 100644
--- a/drivers/watchdog/mixcomwd.c
+++ b/drivers/watchdog/mixcomwd.c
@@ -29,7 +29,8 @@
  *		- support for one more type board
  *
  * Version 0.5 (2001/12/14) Matt Domsch <Matt_Domsch@dell.com>
- *		- added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *		- added nowayout module option to override
+ *		  CONFIG_WATCHDOG_NOWAYOUT
  *
  * Version 0.6 (2002/04/12): Rob Radez <rob@osinvestor.com>
  *		- make mixcomwd_opened unsigned,
@@ -53,8 +54,8 @@
 #include <linux/init.h>
 #include <linux/jiffies.h>
 #include <linux/timer.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 /*
  * We have two types of cards that can be probed:
@@ -108,18 +109,19 @@ static char expect_close;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static void mixcomwd_ping(void)
 {
-	outb_p(55,watchdog_port);
+	outb_p(55, watchdog_port);
 	return;
 }
 
 static void mixcomwd_timerfun(unsigned long d)
 {
 	mixcomwd_ping();
-
 	mod_timer(&mixcomwd_timer, jiffies + 5 * HZ);
 }
 
@@ -129,22 +131,22 @@ static void mixcomwd_timerfun(unsigned long d)
 
 static int mixcomwd_open(struct inode *inode, struct file *file)
 {
-	if(test_and_set_bit(0,&mixcomwd_opened)) {
+	if (test_and_set_bit(0, &mixcomwd_opened))
 		return -EBUSY;
-	}
+
 	mixcomwd_ping();
 
-	if (nowayout) {
+	if (nowayout)
 		/*
 		 * fops_get() code via open() has already done
 		 * a try_module_get() so it is safe to do the
 		 * __module_get().
 		 */
 		__module_get(THIS_MODULE);
-	} else {
-		if(mixcomwd_timer_alive) {
+	else {
+		if (mixcomwd_timer_alive) {
 			del_timer(&mixcomwd_timer);
-			mixcomwd_timer_alive=0;
+			mixcomwd_timer_alive = 0;
 		}
 	}
 	return nonseekable_open(inode, file);
@@ -153,26 +155,27 @@ static int mixcomwd_open(struct inode *inode, struct file *file)
 static int mixcomwd_release(struct inode *inode, struct file *file)
 {
 	if (expect_close == 42) {
-		if(mixcomwd_timer_alive) {
-			printk(KERN_ERR PFX "release called while internal timer alive");
+		if (mixcomwd_timer_alive) {
+			printk(KERN_ERR PFX
+				"release called while internal timer alive");
 			return -EBUSY;
 		}
-		mixcomwd_timer_alive=1;
+		mixcomwd_timer_alive = 1;
 		mod_timer(&mixcomwd_timer, jiffies + 5 * HZ);
-	} else {
-		printk(KERN_CRIT PFX "WDT device closed unexpectedly.  WDT will not stop!\n");
-	}
+	} else
+		printk(KERN_CRIT PFX
+		    "WDT device closed unexpectedly.  WDT will not stop!\n");
 
-	clear_bit(0,&mixcomwd_opened);
-	expect_close=0;
+	clear_bit(0, &mixcomwd_opened);
+	expect_close = 0;
 	return 0;
 }
 
 
-static ssize_t mixcomwd_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+static ssize_t mixcomwd_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
 {
-	if(len)
-	{
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 
@@ -192,8 +195,8 @@ static ssize_t mixcomwd_write(struct file *file, const char __user *data, size_t
 	return len;
 }
 
-static int mixcomwd_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long mixcomwd_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -204,32 +207,23 @@ static int mixcomwd_ioctl(struct inode *inode, struct file *file,
 		.identity = "MixCOM watchdog",
 	};
 
-	switch(cmd)
-	{
-		case WDIOC_GETSTATUS:
-			status=mixcomwd_opened;
-			if (!nowayout) {
-				status|=mixcomwd_timer_alive;
-			}
-			if (copy_to_user(p, &status, sizeof(int))) {
-				return -EFAULT;
-			}
-			break;
-		case WDIOC_GETBOOTSTATUS:
-			if (copy_to_user(p, &status, sizeof(int))) {
-				return -EFAULT;
-			}
-			break;
-		case WDIOC_GETSUPPORT:
-			if (copy_to_user(argp, &ident, sizeof(ident))) {
-				return -EFAULT;
-			}
-			break;
-		case WDIOC_KEEPALIVE:
-			mixcomwd_ping();
-			break;
-		default:
-			return -ENOTTY;
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+		status = mixcomwd_opened;
+		if (!nowayout)
+			status |= mixcomwd_timer_alive;
+		return put_user(status, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		mixcomwd_ping();
+		break;
+	default:
+		return -ENOTTY;
 	}
 	return 0;
 }
@@ -238,7 +232,7 @@ static const struct file_operations mixcomwd_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= mixcomwd_write,
-	.ioctl		= mixcomwd_ioctl,
+	.unlocked_ioctl	= mixcomwd_ioctl,
 	.open		= mixcomwd_open,
 	.release	= mixcomwd_release,
 };
@@ -253,15 +247,14 @@ static int __init checkcard(int port, int card_id)
 {
 	int id;
 
-	if (!request_region(port, 1, "MixCOM watchdog")) {
+	if (!request_region(port, 1, "MixCOM watchdog"))
 		return 0;
-	}
 
-	id=inb_p(port);
-	if (card_id==MIXCOM_ID)
+	id = inb_p(port);
+	if (card_id == MIXCOM_ID)
 		id &= 0x3f;
 
-	if (id!=card_id) {
+	if (id != card_id) {
 		release_region(port, 1);
 		return 0;
 	}
@@ -270,9 +263,7 @@ static int __init checkcard(int port, int card_id)
 
 static int __init mixcomwd_init(void)
 {
-	int i;
-	int ret;
-	int found=0;
+	int i, ret, found = 0;
 
 	for (i = 0; !found && mixcomwd_io_info[i].ioport != 0; i++) {
 		if (checkcard(mixcomwd_io_info[i].ioport,
@@ -283,20 +274,22 @@ static int __init mixcomwd_init(void)
 	}
 
 	if (!found) {
-		printk(KERN_ERR PFX "No card detected, or port not available.\n");
+		printk(KERN_ERR PFX
+			"No card detected, or port not available.\n");
 		return -ENODEV;
 	}
 
 	ret = misc_register(&mixcomwd_miscdev);
-	if (ret)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+	if (ret) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+					WATCHDOG_MINOR, ret);
 		goto error_misc_register_watchdog;
 	}
 
-	printk(KERN_INFO "MixCOM watchdog driver v%s, watchdog port at 0x%3x\n",
-		VERSION, watchdog_port);
+	printk(KERN_INFO
+		"MixCOM watchdog driver v%s, watchdog port at 0x%3x\n",
+					VERSION, watchdog_port);
 
 	return 0;
 
@@ -309,15 +302,15 @@ error_misc_register_watchdog:
 static void __exit mixcomwd_exit(void)
 {
 	if (!nowayout) {
-		if(mixcomwd_timer_alive) {
+		if (mixcomwd_timer_alive) {
 			printk(KERN_WARNING PFX "I quit now, hardware will"
 			       " probably reboot!\n");
 			del_timer_sync(&mixcomwd_timer);
-			mixcomwd_timer_alive=0;
+			mixcomwd_timer_alive = 0;
 		}
 	}
 	misc_deregister(&mixcomwd_miscdev);
-	release_region(watchdog_port,1);
+	release_region(watchdog_port, 1);
 }
 
 module_init(mixcomwd_init);
diff --git a/drivers/watchdog/mpc5200_wdt.c b/drivers/watchdog/mpc5200_wdt.c
index 77c1c2ae2cc..db91892558f 100644
--- a/drivers/watchdog/mpc5200_wdt.c
+++ b/drivers/watchdog/mpc5200_wdt.c
@@ -5,7 +5,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <linux/of_platform.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/mpc52xx.h>
 
 
@@ -57,7 +57,8 @@ static int mpc5200_wdt_start(struct mpc5200_wdt *wdt)
 	/* set timeout, with maximum prescaler */
 	out_be32(&wdt->regs->count, 0x0 | wdt->count);
 	/* enable watchdog */
-	out_be32(&wdt->regs->mode, GPT_MODE_CE | GPT_MODE_WDT | GPT_MODE_MS_TIMER);
+	out_be32(&wdt->regs->mode, GPT_MODE_CE | GPT_MODE_WDT |
+						GPT_MODE_MS_TIMER);
 	spin_unlock(&wdt->io_lock);
 
 	return 0;
@@ -66,7 +67,8 @@ static int mpc5200_wdt_ping(struct mpc5200_wdt *wdt)
 {
 	spin_lock(&wdt->io_lock);
 	/* writing A5 to OCPW resets the watchdog */
-	out_be32(&wdt->regs->mode, 0xA5000000 | (0xffffff & in_be32(&wdt->regs->mode)));
+	out_be32(&wdt->regs->mode, 0xA5000000 |
+				(0xffffff & in_be32(&wdt->regs->mode)));
 	spin_unlock(&wdt->io_lock);
 	return 0;
 }
@@ -92,8 +94,8 @@ static struct watchdog_info mpc5200_wdt_info = {
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity	= "mpc5200 watchdog on GPT0",
 };
-static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file,
-		unsigned int cmd, unsigned long arg)
+static long mpc5200_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	struct mpc5200_wdt *wdt = file->private_data;
 	int __user *data = (int __user *)arg;
@@ -103,7 +105,7 @@ static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file,
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		ret = copy_to_user(data, &mpc5200_wdt_info,
-			sizeof(mpc5200_wdt_info));
+						sizeof(mpc5200_wdt_info));
 		if (ret)
 			ret = -EFAULT;
 		break;
@@ -135,6 +137,7 @@ static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file,
 	}
 	return ret;
 }
+
 static int mpc5200_wdt_open(struct inode *inode, struct file *file)
 {
 	/* /dev/watchdog can only be opened once */
@@ -161,13 +164,14 @@ static int mpc5200_wdt_release(struct inode *inode, struct file *file)
 static const struct file_operations mpc5200_wdt_fops = {
 	.owner	= THIS_MODULE,
 	.write	= mpc5200_wdt_write,
-	.ioctl	= mpc5200_wdt_ioctl,
+	.unlocked_ioctl	= mpc5200_wdt_ioctl,
 	.open	= mpc5200_wdt_open,
 	.release = mpc5200_wdt_release,
 };
 
 /* module operations */
-static int mpc5200_wdt_probe(struct of_device *op, const struct of_device_id *match)
+static int mpc5200_wdt_probe(struct of_device *op,
+					const struct of_device_id *match)
 {
 	struct mpc5200_wdt *wdt;
 	int err;
@@ -215,9 +219,9 @@ static int mpc5200_wdt_probe(struct of_device *op, const struct of_device_id *ma
 		return 0;
 
 	iounmap(wdt->regs);
- out_release:
+out_release:
 	release_mem_region(wdt->mem.start, size);
- out_free:
+out_free:
 	kfree(wdt);
 	return err;
 }
diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c
deleted file mode 100644
index b16c5cd972e..00000000000
--- a/drivers/watchdog/mpc83xx_wdt.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * mpc83xx_wdt.c - MPC83xx watchdog userspace interface
- *
- * Authors: Dave Updegraff <dave@cray.org>
- * 	    Kumar Gala <galak@kernel.crashing.org>
- * 		Attribution: from 83xx_wst: Florian Schirmer <jolt@tuxbox.org>
- * 				..and from sc520_wdt
- *
- * Note: it appears that you can only actually ENABLE or DISABLE the thing
- * once after POR. Once enabled, you cannot disable, and vice versa.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/watchdog.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-struct mpc83xx_wdt {
-	__be32 res0;
-	__be32 swcrr; /* System watchdog control register */
-#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
-#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
-#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/
-#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
-	__be32 swcnr; /* System watchdog count register */
-	u8 res1[2];
-	__be16 swsrr; /* System watchdog service register */
-	u8 res2[0xF0];
-};
-
-static struct mpc83xx_wdt __iomem *wd_base;
-
-static u16 timeout = 0xffff;
-module_param(timeout, ushort, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in ticks. (0<timeout<65536, default=65535");
-
-static int reset = 1;
-module_param(reset, bool, 0);
-MODULE_PARM_DESC(reset, "Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset");
-
-/*
- * We always prescale, but if someone really doesn't want to they can set this
- * to 0
- */
-static int prescale = 1;
-static unsigned int timeout_sec;
-
-static unsigned long wdt_is_open;
-static DEFINE_SPINLOCK(wdt_spinlock);
-
-static void mpc83xx_wdt_keepalive(void)
-{
-	/* Ping the WDT */
-	spin_lock(&wdt_spinlock);
-	out_be16(&wd_base->swsrr, 0x556c);
-	out_be16(&wd_base->swsrr, 0xaa39);
-	spin_unlock(&wdt_spinlock);
-}
-
-static ssize_t mpc83xx_wdt_write(struct file *file, const char __user *buf,
-				 size_t count, loff_t *ppos)
-{
-	if (count)
-		mpc83xx_wdt_keepalive();
-	return count;
-}
-
-static int mpc83xx_wdt_open(struct inode *inode, struct file *file)
-{
-	u32 tmp = SWCRR_SWEN;
-	if (test_and_set_bit(0, &wdt_is_open))
-		return -EBUSY;
-
-	/* Once we start the watchdog we can't stop it */
-	__module_get(THIS_MODULE);
-
-	/* Good, fire up the show */
-	if (prescale)
-		tmp |= SWCRR_SWPR;
-	if (reset)
-		tmp |= SWCRR_SWRI;
-
-	tmp |= timeout << 16;
-
-	out_be32(&wd_base->swcrr, tmp);
-
-	return nonseekable_open(inode, file);
-}
-
-static int mpc83xx_wdt_release(struct inode *inode, struct file *file)
-{
-	printk(KERN_CRIT "Unexpected close, not stopping watchdog!\n");
-	mpc83xx_wdt_keepalive();
-	clear_bit(0, &wdt_is_open);
-	return 0;
-}
-
-static int mpc83xx_wdt_ioctl(struct inode *inode, struct file *file,
-				unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING,
-		.firmware_version = 1,
-		.identity = "MPC83xx",
-	};
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, p);
-	case WDIOC_KEEPALIVE:
-		mpc83xx_wdt_keepalive();
-		return 0;
-	case WDIOC_GETTIMEOUT:
-		return put_user(timeout_sec, p);
-	default:
-		return -ENOTTY;
-	}
-}
-
-static const struct file_operations mpc83xx_wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= mpc83xx_wdt_write,
-	.ioctl		= mpc83xx_wdt_ioctl,
-	.open		= mpc83xx_wdt_open,
-	.release	= mpc83xx_wdt_release,
-};
-
-static struct miscdevice mpc83xx_wdt_miscdev = {
-	.minor	= WATCHDOG_MINOR,
-	.name	= "watchdog",
-	.fops	= &mpc83xx_wdt_fops,
-};
-
-static int __devinit mpc83xx_wdt_probe(struct platform_device *dev)
-{
-	struct resource *r;
-	int ret;
-	unsigned int *freq = dev->dev.platform_data;
-
-	/* get a pointer to the register memory */
-	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
-
-	if (!r) {
-		ret = -ENODEV;
-		goto err_out;
-	}
-
-	wd_base = ioremap(r->start, sizeof (struct mpc83xx_wdt));
-
-	if (wd_base == NULL) {
-		ret = -ENOMEM;
-		goto err_out;
-	}
-
-	ret = misc_register(&mpc83xx_wdt_miscdev);
-	if (ret) {
-		printk(KERN_ERR "cannot register miscdev on minor=%d "
-				"(err=%d)\n",
-				WATCHDOG_MINOR, ret);
-		goto err_unmap;
-	}
-
-	/* Calculate the timeout in seconds */
-	if (prescale)
-		timeout_sec = (timeout * 0x10000) / (*freq);
-	else
-		timeout_sec = timeout / (*freq);
-
-	printk(KERN_INFO "WDT driver for MPC83xx initialized. "
-		"mode:%s timeout=%d (%d seconds)\n",
-		reset ? "reset":"interrupt", timeout, timeout_sec);
-	return 0;
-
-err_unmap:
-	iounmap(wd_base);
-err_out:
-	return ret;
-}
-
-static int __devexit mpc83xx_wdt_remove(struct platform_device *dev)
-{
-	misc_deregister(&mpc83xx_wdt_miscdev);
-	iounmap(wd_base);
-
-	return 0;
-}
-
-static struct platform_driver mpc83xx_wdt_driver = {
-	.probe		= mpc83xx_wdt_probe,
-	.remove		= __devexit_p(mpc83xx_wdt_remove),
-	.driver		= {
-		.name	= "mpc83xx_wdt",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init mpc83xx_wdt_init(void)
-{
-	return platform_driver_register(&mpc83xx_wdt_driver);
-}
-
-static void __exit mpc83xx_wdt_exit(void)
-{
-	platform_driver_unregister(&mpc83xx_wdt_driver);
-}
-
-module_init(mpc83xx_wdt_init);
-module_exit(mpc83xx_wdt_exit);
-
-MODULE_AUTHOR("Dave Updegraff, Kumar Gala");
-MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-MODULE_ALIAS("platform:mpc83xx_wdt");
diff --git a/drivers/watchdog/mpc8xx_wdt.c b/drivers/watchdog/mpc8xx_wdt.c
deleted file mode 100644
index 85b5734403a..00000000000
--- a/drivers/watchdog/mpc8xx_wdt.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * mpc8xx_wdt.c - MPC8xx watchdog userspace interface
- *
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/watchdog.h>
-#include <asm/8xx_immap.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <syslib/m8xx_wdt.h>
-
-static unsigned long wdt_opened;
-static int wdt_status;
-
-static void mpc8xx_wdt_handler_disable(void)
-{
-	volatile uint __iomem *piscr;
-	piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr;
-
-	if (!m8xx_has_internal_rtc)
-		m8xx_wdt_stop_timer();
-	else
-		out_be32(piscr, in_be32(piscr) & ~(PISCR_PIE | PISCR_PTE));
-
-	printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler deactivated\n");
-}
-
-static void mpc8xx_wdt_handler_enable(void)
-{
-	volatile uint __iomem *piscr;
-	piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr;
-
-	if (!m8xx_has_internal_rtc)
-		m8xx_wdt_install_timer();
-	else
-		out_be32(piscr, in_be32(piscr) | PISCR_PIE | PISCR_PTE);
-
-	printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler activated\n");
-}
-
-static int mpc8xx_wdt_open(struct inode *inode, struct file *file)
-{
-	if (test_and_set_bit(0, &wdt_opened))
-		return -EBUSY;
-
-	m8xx_wdt_reset();
-	mpc8xx_wdt_handler_disable();
-
-	return nonseekable_open(inode, file);
-}
-
-static int mpc8xx_wdt_release(struct inode *inode, struct file *file)
-{
-	m8xx_wdt_reset();
-
-#if !defined(CONFIG_WATCHDOG_NOWAYOUT)
-	mpc8xx_wdt_handler_enable();
-#endif
-
-	clear_bit(0, &wdt_opened);
-
-	return 0;
-}
-
-static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, size_t len,
-				loff_t * ppos)
-{
-	if (len)
-		m8xx_wdt_reset();
-
-	return len;
-}
-
-static int mpc8xx_wdt_ioctl(struct inode *inode, struct file *file,
-			    unsigned int cmd, unsigned long arg)
-{
-	int timeout;
-	static struct watchdog_info info = {
-		.options = WDIOF_KEEPALIVEPING,
-		.firmware_version = 0,
-		.identity = "MPC8xx watchdog",
-	};
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		if (copy_to_user((void *)arg, &info, sizeof(info)))
-			return -EFAULT;
-		break;
-
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		if (put_user(wdt_status, (int *)arg))
-			return -EFAULT;
-		wdt_status &= ~WDIOF_KEEPALIVEPING;
-		break;
-
-	case WDIOC_GETTEMP:
-		return -EOPNOTSUPP;
-
-	case WDIOC_SETOPTIONS:
-		return -EOPNOTSUPP;
-
-	case WDIOC_KEEPALIVE:
-		m8xx_wdt_reset();
-		wdt_status |= WDIOF_KEEPALIVEPING;
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		return -EOPNOTSUPP;
-
-	case WDIOC_GETTIMEOUT:
-		timeout = m8xx_wdt_get_timeout();
-		if (put_user(timeout, (int *)arg))
-			return -EFAULT;
-		break;
-
-	default:
-		return -ENOTTY;
-	}
-
-	return 0;
-}
-
-static const struct file_operations mpc8xx_wdt_fops = {
-	.owner = THIS_MODULE,
-	.llseek = no_llseek,
-	.write = mpc8xx_wdt_write,
-	.ioctl = mpc8xx_wdt_ioctl,
-	.open = mpc8xx_wdt_open,
-	.release = mpc8xx_wdt_release,
-};
-
-static struct miscdevice mpc8xx_wdt_miscdev = {
-	.minor = WATCHDOG_MINOR,
-	.name = "watchdog",
-	.fops = &mpc8xx_wdt_fops,
-};
-
-static int __init mpc8xx_wdt_init(void)
-{
-	return misc_register(&mpc8xx_wdt_miscdev);
-}
-
-static void __exit mpc8xx_wdt_exit(void)
-{
-	misc_deregister(&mpc8xx_wdt_miscdev);
-
-	m8xx_wdt_reset();
-	mpc8xx_wdt_handler_enable();
-}
-
-module_init(mpc8xx_wdt_init);
-module_exit(mpc8xx_wdt_exit);
-
-MODULE_AUTHOR("Florian Schirmer <jolt@tuxbox.org>");
-MODULE_DESCRIPTION("MPC8xx watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
new file mode 100644
index 00000000000..38c588ee694
--- /dev/null
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -0,0 +1,325 @@
+/*
+ * mpc8xxx_wdt.c - MPC8xx/MPC83xx/MPC86xx watchdog userspace interface
+ *
+ * Authors: Dave Updegraff <dave@cray.org>
+ * 	    Kumar Gala <galak@kernel.crashing.org>
+ * 		Attribution: from 83xx_wst: Florian Schirmer <jolt@tuxbox.org>
+ * 				..and from sc520_wdt
+ * Copyright (c) 2008  MontaVista Software, Inc.
+ *                     Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * Note: it appears that you can only actually ENABLE or DISABLE the thing
+ * once after POR. Once enabled, you cannot disable, and vice versa.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <sysdev/fsl_soc.h>
+
+struct mpc8xxx_wdt {
+	__be32 res0;
+	__be32 swcrr; /* System watchdog control register */
+#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
+#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
+#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/
+#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
+	__be32 swcnr; /* System watchdog count register */
+	u8 res1[2];
+	__be16 swsrr; /* System watchdog service register */
+	u8 res2[0xF0];
+};
+
+struct mpc8xxx_wdt_type {
+	int prescaler;
+	bool hw_enabled;
+};
+
+static struct mpc8xxx_wdt __iomem *wd_base;
+static int mpc8xxx_wdt_init_late(void);
+
+static u16 timeout = 0xffff;
+module_param(timeout, ushort, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in ticks. (0<timeout<65536, default=65535");
+
+static int reset = 1;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset,
+	"Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+		 "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ * We always prescale, but if someone really doesn't want to they can set this
+ * to 0
+ */
+static int prescale = 1;
+static unsigned int timeout_sec;
+
+static unsigned long wdt_is_open;
+static DEFINE_SPINLOCK(wdt_spinlock);
+
+static void mpc8xxx_wdt_keepalive(void)
+{
+	/* Ping the WDT */
+	spin_lock(&wdt_spinlock);
+	out_be16(&wd_base->swsrr, 0x556c);
+	out_be16(&wd_base->swsrr, 0xaa39);
+	spin_unlock(&wdt_spinlock);
+}
+
+static void mpc8xxx_wdt_timer_ping(unsigned long arg);
+static DEFINE_TIMER(wdt_timer, mpc8xxx_wdt_timer_ping, 0, 0);
+
+static void mpc8xxx_wdt_timer_ping(unsigned long arg)
+{
+	mpc8xxx_wdt_keepalive();
+	/* We're pinging it twice faster than needed, just to be sure. */
+	mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2);
+}
+
+static void mpc8xxx_wdt_pr_warn(const char *msg)
+{
+	pr_crit("mpc8xxx_wdt: %s, expect the %s soon!\n", msg,
+		reset ? "reset" : "machine check exception");
+}
+
+static ssize_t mpc8xxx_wdt_write(struct file *file, const char __user *buf,
+				 size_t count, loff_t *ppos)
+{
+	if (count)
+		mpc8xxx_wdt_keepalive();
+	return count;
+}
+
+static int mpc8xxx_wdt_open(struct inode *inode, struct file *file)
+{
+	u32 tmp = SWCRR_SWEN;
+	if (test_and_set_bit(0, &wdt_is_open))
+		return -EBUSY;
+
+	/* Once we start the watchdog we can't stop it */
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Good, fire up the show */
+	if (prescale)
+		tmp |= SWCRR_SWPR;
+	if (reset)
+		tmp |= SWCRR_SWRI;
+
+	tmp |= timeout << 16;
+
+	out_be32(&wd_base->swcrr, tmp);
+
+	del_timer_sync(&wdt_timer);
+
+	return nonseekable_open(inode, file);
+}
+
+static int mpc8xxx_wdt_release(struct inode *inode, struct file *file)
+{
+	if (!nowayout)
+		mpc8xxx_wdt_timer_ping(0);
+	else
+		mpc8xxx_wdt_pr_warn("watchdog closed");
+	clear_bit(0, &wdt_is_open);
+	return 0;
+}
+
+static long mpc8xxx_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING,
+		.firmware_version = 1,
+		.identity = "MPC8xxx",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		mpc8xxx_wdt_keepalive();
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout_sec, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations mpc8xxx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= mpc8xxx_wdt_write,
+	.unlocked_ioctl	= mpc8xxx_wdt_ioctl,
+	.open		= mpc8xxx_wdt_open,
+	.release	= mpc8xxx_wdt_release,
+};
+
+static struct miscdevice mpc8xxx_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &mpc8xxx_wdt_fops,
+};
+
+static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev,
+				       const struct of_device_id *match)
+{
+	int ret;
+	struct device_node *np = ofdev->node;
+	struct mpc8xxx_wdt_type *wdt_type = match->data;
+	u32 freq = fsl_get_sys_freq();
+	bool enabled;
+
+	if (!freq || freq == -1)
+		return -EINVAL;
+
+	wd_base = of_iomap(np, 0);
+	if (!wd_base)
+		return -ENOMEM;
+
+	enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN;
+	if (!enabled && wdt_type->hw_enabled) {
+		pr_info("mpc8xxx_wdt: could not be enabled in software\n");
+		ret = -ENOSYS;
+		goto err_unmap;
+	}
+
+	/* Calculate the timeout in seconds */
+	if (prescale)
+		timeout_sec = (timeout * wdt_type->prescaler) / freq;
+	else
+		timeout_sec = timeout / freq;
+
+#ifdef MODULE
+	ret = mpc8xxx_wdt_init_late();
+	if (ret)
+		goto err_unmap;
+#endif
+
+	pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d "
+		"(%d seconds)\n", reset ? "reset" : "interrupt", timeout,
+		timeout_sec);
+
+	/*
+	 * If the watchdog was previously enabled or we're running on
+	 * MPC8xxx, we should ping the wdt from the kernel until the
+	 * userspace handles it.
+	 */
+	if (enabled)
+		mpc8xxx_wdt_timer_ping(0);
+	return 0;
+err_unmap:
+	iounmap(wd_base);
+	wd_base = NULL;
+	return ret;
+}
+
+static int __devexit mpc8xxx_wdt_remove(struct of_device *ofdev)
+{
+	mpc8xxx_wdt_pr_warn("watchdog removed");
+	del_timer_sync(&wdt_timer);
+	misc_deregister(&mpc8xxx_wdt_miscdev);
+	iounmap(wd_base);
+
+	return 0;
+}
+
+static const struct of_device_id mpc8xxx_wdt_match[] = {
+	{
+		.compatible = "mpc83xx_wdt",
+		.data = &(struct mpc8xxx_wdt_type) {
+			.prescaler = 0x10000,
+		},
+	},
+	{
+		.compatible = "fsl,mpc8610-wdt",
+		.data = &(struct mpc8xxx_wdt_type) {
+			.prescaler = 0x10000,
+			.hw_enabled = true,
+		},
+	},
+	{
+		.compatible = "fsl,mpc823-wdt",
+		.data = &(struct mpc8xxx_wdt_type) {
+			.prescaler = 0x800,
+		},
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match);
+
+static struct of_platform_driver mpc8xxx_wdt_driver = {
+	.match_table	= mpc8xxx_wdt_match,
+	.probe		= mpc8xxx_wdt_probe,
+	.remove		= __devexit_p(mpc8xxx_wdt_remove),
+	.driver		= {
+		.name	= "mpc8xxx_wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+/*
+ * We do wdt initialization in two steps: arch_initcall probes the wdt
+ * very early to start pinging the watchdog (misc devices are not yet
+ * available), and later module_init() just registers the misc device.
+ */
+static int mpc8xxx_wdt_init_late(void)
+{
+	int ret;
+
+	if (!wd_base)
+		return -ENODEV;
+
+	ret = misc_register(&mpc8xxx_wdt_miscdev);
+	if (ret) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+			WATCHDOG_MINOR, ret);
+		return ret;
+	}
+	return 0;
+}
+#ifndef MODULE
+module_init(mpc8xxx_wdt_init_late);
+#endif
+
+static int __init mpc8xxx_wdt_init(void)
+{
+	return of_register_platform_driver(&mpc8xxx_wdt_driver);
+}
+arch_initcall(mpc8xxx_wdt_init);
+
+static void __exit mpc8xxx_wdt_exit(void)
+{
+	of_unregister_platform_driver(&mpc8xxx_wdt_driver);
+}
+module_exit(mpc8xxx_wdt_exit);
+
+MODULE_AUTHOR("Dave Updegraff, Kumar Gala");
+MODULE_DESCRIPTION("Driver for watchdog timer in MPC8xx/MPC83xx/MPC86xx "
+		   "uProcessors");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index 009573b8149..2a9bfa81f9d 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -29,9 +29,9 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/uaccess.h>
 
 #include <asm/hardware/arm_twd.h>
-#include <asm/uaccess.h>
 
 struct mpcore_wdt {
 	unsigned long	timer_alive;
@@ -43,17 +43,20 @@ struct mpcore_wdt {
 };
 
 static struct platform_device *mpcore_wdt_dev;
-
 extern unsigned int mpcore_timer_rate;
 
 #define TIMER_MARGIN	60
 static int mpcore_margin = TIMER_MARGIN;
 module_param(mpcore_margin, int, 0);
-MODULE_PARM_DESC(mpcore_margin, "MPcore timer margin in seconds. (0<mpcore_margin<65536, default=" __MODULE_STRING(TIMER_MARGIN) ")");
+MODULE_PARM_DESC(mpcore_margin,
+	"MPcore timer margin in seconds. (0 < mpcore_margin < 65536, default="
+				__MODULE_STRING(TIMER_MARGIN) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 #define ONLY_TESTING	0
 static int mpcore_noboot = ONLY_TESTING;
@@ -70,14 +73,12 @@ static irqreturn_t mpcore_wdt_fire(int irq, void *arg)
 
 	/* Check it really was our interrupt */
 	if (readl(wdt->base + TWD_WDOG_INTSTAT)) {
-		dev_printk(KERN_CRIT, wdt->dev, "Triggered - Reboot ignored.\n");
-
+		dev_printk(KERN_CRIT, wdt->dev,
+					"Triggered - Reboot ignored.\n");
 		/* Clear the interrupt on the watchdog */
 		writel(1, wdt->base + TWD_WDOG_INTSTAT);
-
 		return IRQ_HANDLED;
 	}
-
 	return IRQ_NONE;
 }
 
@@ -96,22 +97,26 @@ static void mpcore_wdt_keepalive(struct mpcore_wdt *wdt)
 	count = (mpcore_timer_rate / 256) * mpcore_margin;
 
 	/* Reload the counter */
+	spin_lock(&wdt_lock);
 	writel(count + wdt->perturb, wdt->base + TWD_WDOG_LOAD);
-
 	wdt->perturb = wdt->perturb ? 0 : 1;
+	spin_unlock(&wdt_lock);
 }
 
 static void mpcore_wdt_stop(struct mpcore_wdt *wdt)
 {
+	spin_lock(&wdt_lock);
 	writel(0x12345678, wdt->base + TWD_WDOG_DISABLE);
 	writel(0x87654321, wdt->base + TWD_WDOG_DISABLE);
 	writel(0x0, wdt->base + TWD_WDOG_CONTROL);
+	spin_unlock(&wdt_lock);
 }
 
 static void mpcore_wdt_start(struct mpcore_wdt *wdt)
 {
 	dev_printk(KERN_INFO, wdt->dev, "enabling watchdog.\n");
 
+	spin_lock(&wdt_lock);
 	/* This loads the count register but does NOT start the count yet */
 	mpcore_wdt_keepalive(wdt);
 
@@ -122,6 +127,7 @@ static void mpcore_wdt_start(struct mpcore_wdt *wdt)
 		/* Enable watchdog - prescale=256, watchdog mode=1, enable=1 */
 		writel(0x0000FF09, wdt->base + TWD_WDOG_CONTROL);
 	}
+	spin_unlock(&wdt_lock);
 }
 
 static int mpcore_wdt_set_heartbeat(int t)
@@ -164,10 +170,11 @@ static int mpcore_wdt_release(struct inode *inode, struct file *file)
 	 *	Shut off the timer.
 	 * 	Lock it in if it's a module and we set nowayout
 	 */
-	if (wdt->expect_close == 42) {
+	if (wdt->expect_close == 42)
 		mpcore_wdt_stop(wdt);
-	} else {
-		dev_printk(KERN_CRIT, wdt->dev, "unexpected close, not stopping watchdog!\n");
+	else {
+		dev_printk(KERN_CRIT, wdt->dev,
+				"unexpected close, not stopping watchdog!\n");
 		mpcore_wdt_keepalive(wdt);
 	}
 	clear_bit(0, &wdt->timer_alive);
@@ -175,7 +182,8 @@ static int mpcore_wdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t mpcore_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t mpcore_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	struct mpcore_wdt *wdt = file->private_data;
 
@@ -210,8 +218,8 @@ static struct watchdog_info ident = {
 	.identity		= "MPcore Watchdog",
 };
 
-static int mpcore_wdt_ioctl(struct inode *inode, struct file *file,
-			     unsigned int cmd, unsigned long arg)
+static long mpcore_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	struct mpcore_wdt *wdt = file->private_data;
 	int ret;
@@ -235,6 +243,12 @@ static int mpcore_wdt_ioctl(struct inode *inode, struct file *file,
 		ret = 0;
 		break;
 
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		uarg.i = 0;
+		ret = 0;
+		break;
+
 	case WDIOC_SETOPTIONS:
 		ret = -EINVAL;
 		if (uarg.i & WDIOS_DISABLECARD) {
@@ -247,12 +261,6 @@ static int mpcore_wdt_ioctl(struct inode *inode, struct file *file,
 		}
 		break;
 
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		uarg.i = 0;
-		ret = 0;
-		break;
-
 	case WDIOC_KEEPALIVE:
 		mpcore_wdt_keepalive(wdt);
 		ret = 0;
@@ -301,7 +309,7 @@ static const struct file_operations mpcore_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= mpcore_wdt_write,
-	.ioctl		= mpcore_wdt_ioctl,
+	.unlocked_ioctl	= mpcore_wdt_ioctl,
 	.open		= mpcore_wdt_open,
 	.release	= mpcore_wdt_release,
 };
@@ -349,14 +357,17 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev)
 	mpcore_wdt_miscdev.parent = &dev->dev;
 	ret = misc_register(&mpcore_wdt_miscdev);
 	if (ret) {
-		dev_printk(KERN_ERR, _dev, "cannot register miscdev on minor=%d (err=%d)\n",
-			   WATCHDOG_MINOR, ret);
+		dev_printk(KERN_ERR, _dev,
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto err_misc;
 	}
 
-	ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED, "mpcore_wdt", wdt);
+	ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED,
+							"mpcore_wdt", wdt);
 	if (ret) {
-		dev_printk(KERN_ERR, _dev, "cannot register IRQ%d for watchdog\n", wdt->irq);
+		dev_printk(KERN_ERR, _dev,
+			"cannot register IRQ%d for watchdog\n", wdt->irq);
 		goto err_irq;
 	}
 
@@ -366,13 +377,13 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev)
 
 	return 0;
 
- err_irq:
+err_irq:
 	misc_deregister(&mpcore_wdt_miscdev);
- err_misc:
+err_misc:
 	iounmap(wdt->base);
- err_free:
+err_free:
 	kfree(wdt);
- err_out:
+err_out:
 	return ret;
 }
 
@@ -415,7 +426,7 @@ static int __init mpcore_wdt_init(void)
 	 */
 	if (mpcore_wdt_set_heartbeat(mpcore_margin)) {
 		mpcore_wdt_set_heartbeat(TIMER_MARGIN);
-		printk(KERN_INFO "mpcore_margin value must be 0<mpcore_margin<65536, using %d\n",
+		printk(KERN_INFO "mpcore_margin value must be 0 < mpcore_margin < 65536, using %d\n",
 			TIMER_MARGIN);
 	}
 
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index a8e67383784..b4b7b0a4c11 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -1,7 +1,8 @@
 /*
  *      Driver for the MTX-1 Watchdog.
  *
- *      (C) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved.
+ *      (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
+ *							All Rights Reserved.
  *                              http://www.4g-systems.biz
  *
  * 	(C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
@@ -46,12 +47,11 @@
 #include <linux/jiffies.h>
 #include <linux/watchdog.h>
 #include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-au1x00/au1000.h>
-#include <asm/gpio.h>
 
 #define MTX1_WDT_INTERVAL	(5 * HZ)
 
@@ -59,6 +59,7 @@ static int ticks = 100 * HZ;
 
 static struct {
 	struct completion stop;
+	spinlock_t lock;
 	int running;
 	struct timer_list timer;
 	int queue;
@@ -71,6 +72,7 @@ static void mtx1_wdt_trigger(unsigned long unused)
 {
 	u32 tmp;
 
+	spin_lock(&mtx1_wdt_device.lock);
 	if (mtx1_wdt_device.running)
 		ticks--;
 	/*
@@ -79,13 +81,13 @@ static void mtx1_wdt_trigger(unsigned long unused)
 	tmp = au_readl(GPIO2_DIR);
 	tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) |
 	      ((~tmp) & (1 << mtx1_wdt_device.gpio));
-	au_writel (tmp, GPIO2_DIR);
+	au_writel(tmp, GPIO2_DIR);
 
 	if (mtx1_wdt_device.queue && ticks)
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
-	else {
+	else
 		complete(&mtx1_wdt_device.stop);
-	}
+	spin_unlock(&mtx1_wdt_device.lock);
 }
 
 static void mtx1_wdt_reset(void)
@@ -96,23 +98,25 @@ static void mtx1_wdt_reset(void)
 
 static void mtx1_wdt_start(void)
 {
+	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (!mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 1;
 		gpio_set_value(mtx1_wdt_device.gpio, 1);
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
 	}
 	mtx1_wdt_device.running++;
+	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
 }
 
 static int mtx1_wdt_stop(void)
 {
+	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 0;
 		gpio_set_value(mtx1_wdt_device.gpio, 0);
 	}
-
 	ticks = mtx1_wdt_device.default_ticks;
-
+	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
 	return 0;
 }
 
@@ -122,7 +126,6 @@ static int mtx1_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(0, &mtx1_wdt_device.inuse))
 		return -EBUSY;
-
 	return nonseekable_open(inode, file);
 }
 
@@ -133,54 +136,51 @@ static int mtx1_wdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int mtx1_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long mtx1_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
+	int __user *p = (int __user *)argp;
 	unsigned int value;
-	static struct watchdog_info ident =
-	{
+	static const struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "MTX-1 WDT",
 	};
 
-	switch(cmd) {
-		case WDIOC_KEEPALIVE:
-			mtx1_wdt_reset();
-			break;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			if ( copy_to_user(argp, &value, sizeof(int)) )
-				return -EFAULT;
-			break;
-		case WDIOC_GETSUPPORT:
-			if ( copy_to_user(argp, &ident, sizeof(ident)) )
-				return -EFAULT;
-			break;
-		case WDIOC_SETOPTIONS:
-			if ( copy_from_user(&value, argp, sizeof(int)) )
-				return -EFAULT;
-			switch(value) {
-				case WDIOS_ENABLECARD:
-					mtx1_wdt_start();
-					break;
-				case WDIOS_DISABLECARD:
-					return mtx1_wdt_stop();
-				default:
-					return -EINVAL;
-			}
-			break;
-		default:
-			return -ENOTTY;
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		put_user(0, p);
+		break;
+	case WDIOC_SETOPTIONS:
+		if (get_user(value, p))
+			return -EFAULT;
+		if (value & WDIOS_ENABLECARD)
+			mtx1_wdt_start();
+		else if (value & WDIOS_DISABLECARD)
+			mtx1_wdt_stop();
+		else
+			return -EINVAL;
+		return 0;
+	case WDIOC_KEEPALIVE:
+		mtx1_wdt_reset();
+		break;
+	default:
+		return -ENOTTY;
 	}
 	return 0;
 }
 
 
-static ssize_t mtx1_wdt_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
+static ssize_t mtx1_wdt_write(struct file *file, const char *buf,
+						size_t count, loff_t *ppos)
 {
 	if (!count)
 		return -EIO;
-
 	mtx1_wdt_reset();
 	return count;
 }
@@ -188,17 +188,17 @@ static ssize_t mtx1_wdt_write(struct file *file, const char *buf, size_t count,
 static const struct file_operations mtx1_wdt_fops = {
 	.owner 		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= mtx1_wdt_ioctl,
+	.unlocked_ioctl	= mtx1_wdt_ioctl,
 	.open 		= mtx1_wdt_open,
 	.write 		= mtx1_wdt_write,
-	.release 	= mtx1_wdt_release
+	.release 	= mtx1_wdt_release,
 };
 
 
 static struct miscdevice mtx1_wdt_misc = {
 	.minor 	= WATCHDOG_MINOR,
 	.name 	= "watchdog",
-	.fops 	= &mtx1_wdt_fops
+	.fops 	= &mtx1_wdt_fops,
 };
 
 
@@ -208,29 +208,26 @@ static int mtx1_wdt_probe(struct platform_device *pdev)
 
 	mtx1_wdt_device.gpio = pdev->resource[0].start;
 
-	if ((ret = misc_register(&mtx1_wdt_misc)) < 0) {
-		printk(KERN_ERR " mtx-1_wdt : failed to register\n");
-		return ret;
-	}
-
+	spin_lock_init(&mtx1_wdt_device.lock);
 	init_completion(&mtx1_wdt_device.stop);
 	mtx1_wdt_device.queue = 0;
-
 	clear_bit(0, &mtx1_wdt_device.inuse);
-
 	setup_timer(&mtx1_wdt_device.timer, mtx1_wdt_trigger, 0L);
-
 	mtx1_wdt_device.default_ticks = ticks;
 
+	ret = misc_register(&mtx1_wdt_misc);
+	if (ret < 0) {
+		printk(KERN_ERR " mtx-1_wdt : failed to register\n");
+		return ret;
+	}
 	mtx1_wdt_start();
-
 	printk(KERN_INFO "MTX-1 Watchdog driver\n");
-
 	return 0;
 }
 
 static int mtx1_wdt_remove(struct platform_device *pdev)
 {
+	/* FIXME: do we need to lock this test ? */
 	if (mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 0;
 		wait_for_completion(&mtx1_wdt_device.stop);
diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c
index b59ca327396..acf589dc057 100644
--- a/drivers/watchdog/mv64x60_wdt.c
+++ b/drivers/watchdog/mv64x60_wdt.c
@@ -8,7 +8,7 @@
  * and services the watchdog.
  *
  * Derived from mpc8xx_wdt.c, with the following copyright.
- * 
+ *
  * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
@@ -22,10 +22,9 @@
 #include <linux/module.h>
 #include <linux/watchdog.h>
 #include <linux/platform_device.h>
-
 #include <linux/mv643xx.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #define MV64x60_WDT_WDC_OFFSET	0
 
@@ -61,7 +60,9 @@ static DEFINE_SPINLOCK(mv64x60_wdt_spinlock);
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static int mv64x60_wdt_toggle_wdc(int enabled_predicate, int field_shift)
 {
@@ -150,7 +151,7 @@ static int mv64x60_wdt_release(struct inode *inode, struct file *file)
 }
 
 static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data,
-				 size_t len, loff_t * ppos)
+				 size_t len, loff_t *ppos)
 {
 	if (len) {
 		if (!nowayout) {
@@ -160,7 +161,7 @@ static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data,
 
 			for (i = 0; i != len; i++) {
 				char c;
-				if(get_user(c, data + i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -172,8 +173,8 @@ static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file,
-			     unsigned int cmd, unsigned long arg)
+static long mv64x60_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	int timeout;
 	int options;
@@ -240,7 +241,7 @@ static const struct file_operations mv64x60_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = mv64x60_wdt_write,
-	.ioctl = mv64x60_wdt_ioctl,
+	.unlocked_ioctl = mv64x60_wdt_ioctl,
 	.open = mv64x60_wdt_open,
 	.release = mv64x60_wdt_release,
 };
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 74bc39aa1ce..3a11dadfd8e 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -40,12 +40,10 @@
 #include <linux/moduleparam.h>
 #include <linux/clk.h>
 #include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/hardware.h>
-
-#include <asm/arch/prcm.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
+#include <mach/prcm.h>
 
 #include "omap_wdt.h"
 
@@ -54,11 +52,12 @@ module_param(timer_margin, uint, 0);
 MODULE_PARM_DESC(timer_margin, "initial watchdog timeout (in seconds)");
 
 static int omap_wdt_users;
-static struct clk *armwdt_ck = NULL;
-static struct clk *mpu_wdt_ick = NULL;
-static struct clk *mpu_wdt_fck = NULL;
+static struct clk *armwdt_ck;
+static struct clk *mpu_wdt_ick;
+static struct clk *mpu_wdt_fck;
 
 static unsigned int wdt_trgr_pattern = 0x1234;
+static spinlock_t wdt_lock;
 
 static void omap_wdt_ping(void)
 {
@@ -174,30 +173,29 @@ static int omap_wdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t
-omap_wdt_write(struct file *file, const char __user *data,
+static ssize_t omap_wdt_write(struct file *file, const char __user *data,
 		size_t len, loff_t *ppos)
 {
 	/* Refresh LOAD_TIME. */
-	if (len)
+	if (len) {
+		spin_lock(&wdt_lock);
 		omap_wdt_ping();
+		spin_unlock(&wdt_lock);
+	}
 	return len;
 }
 
-static int
-omap_wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long omap_wdt_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	int new_margin;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.identity = "OMAP Watchdog",
 		.options = WDIOF_SETTIMEOUT,
 		.firmware_version = 0,
 	};
 
 	switch (cmd) {
-	default:
-		return -ENOTTY;
 	case WDIOC_GETSUPPORT:
 		return copy_to_user((struct watchdog_info __user *)arg, &ident,
 				sizeof(ident));
@@ -211,28 +209,34 @@ omap_wdt_ioctl(struct inode *inode, struct file *file,
 			return put_user(omap_prcm_get_reset_sources(),
 					(int __user *)arg);
 	case WDIOC_KEEPALIVE:
+		spin_lock(&wdt_lock);
 		omap_wdt_ping();
+		spin_unlock(&wdt_lock);
 		return 0;
 	case WDIOC_SETTIMEOUT:
 		if (get_user(new_margin, (int __user *)arg))
 			return -EFAULT;
 		omap_wdt_adjust_timeout(new_margin);
 
+		spin_lock(&wdt_lock);
 		omap_wdt_disable();
 		omap_wdt_set_timeout();
 		omap_wdt_enable();
 
 		omap_wdt_ping();
+		spin_unlock(&wdt_lock);
 		/* Fall */
 	case WDIOC_GETTIMEOUT:
 		return put_user(timer_margin, (int __user *)arg);
+	default:
+		return -ENOTTY;
 	}
 }
 
 static const struct file_operations omap_wdt_fops = {
 	.owner = THIS_MODULE,
 	.write = omap_wdt_write,
-	.ioctl = omap_wdt_ioctl,
+	.unlocked_ioctl = omap_wdt_ioctl,
 	.open = omap_wdt_open,
 	.release = omap_wdt_release,
 };
@@ -240,7 +244,7 @@ static const struct file_operations omap_wdt_fops = {
 static struct miscdevice omap_wdt_miscdev = {
 	.minor = WATCHDOG_MINOR,
 	.name = "watchdog",
-	.fops = &omap_wdt_fops
+	.fops = &omap_wdt_fops,
 };
 
 static int __init omap_wdt_probe(struct platform_device *pdev)
@@ -373,6 +377,7 @@ static struct platform_driver omap_wdt_driver = {
 
 static int __init omap_wdt_init(void)
 {
+	spin_lock_init(&wdt_lock);
 	return platform_driver_register(&omap_wdt_driver);
 }
 
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 15e4f8887a9..484c215e9f3 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -30,15 +30,14 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 /* #define DEBUG 1 */
 
-#define DEFAULT_TIMEOUT     1            /* 1 minute */
+#define DEFAULT_TIMEOUT     1		/* 1 minute */
 #define MAX_TIMEOUT         255
 
 #define VERSION             "1.1"
@@ -46,22 +45,22 @@
 #define PFX                 MODNAME ": "
 #define DPFX                MODNAME " - DEBUG: "
 
-#define WDT_INDEX_IO_PORT   (io+0)       /* I/O port base (index register) */
+#define WDT_INDEX_IO_PORT   (io+0)	/* I/O port base (index register) */
 #define WDT_DATA_IO_PORT    (WDT_INDEX_IO_PORT+1)
 #define SWC_LDN             0x04
-#define SIOCFG2             0x22         /* Serial IO register */
-#define WDCTL               0x10         /* Watchdog-Timer-Controll-Register */
-#define WDTO                0x11         /* Watchdog timeout register */
-#define WDCFG               0x12         /* Watchdog config register */
+#define SIOCFG2             0x22	/* Serial IO register */
+#define WDCTL               0x10	/* Watchdog-Timer-Controll-Register */
+#define WDTO                0x11	/* Watchdog timeout register */
+#define WDCFG               0x12	/* Watchdog config register */
 
-static int io = 0x2E;		         /* Address used on Portwell Boards */
+static int io = 0x2E;			/* Address used on Portwell Boards */
 
-static int timeout = DEFAULT_TIMEOUT;    /* timeout value */
-static unsigned long timer_enabled = 0;  /* is the timer enabled? */
+static int timeout = DEFAULT_TIMEOUT;	/* timeout value */
+static unsigned long timer_enabled;	/* is the timer enabled? */
 
-static char expect_close;                /* is the close expected? */
+static char expect_close;		/* is the close expected? */
 
-static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */
+static DEFINE_SPINLOCK(io_lock);	/* to guard us from io races */
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 
@@ -69,7 +68,7 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 
 /* Select pins for Watchdog output */
 
-static inline void pc87413_select_wdt_out (void)
+static inline void pc87413_select_wdt_out(void)
 {
 	unsigned int cr_data = 0;
 
@@ -77,7 +76,7 @@ static inline void pc87413_select_wdt_out (void)
 
 	outb_p(SIOCFG2, WDT_INDEX_IO_PORT);
 
-	cr_data = inb (WDT_DATA_IO_PORT);
+	cr_data = inb(WDT_DATA_IO_PORT);
 
 	cr_data |= 0x80; /* Set Bit7 to 1*/
 	outb_p(SIOCFG2, WDT_INDEX_IO_PORT);
@@ -85,8 +84,9 @@ static inline void pc87413_select_wdt_out (void)
 	outb_p(cr_data, WDT_DATA_IO_PORT);
 
 #ifdef DEBUG
-	printk(KERN_INFO DPFX "Select multiple pin,pin55,as WDT output:"
-	                      " Bit7 to 1: %d\n", cr_data);
+	printk(KERN_INFO DPFX
+		"Select multiple pin,pin55,as WDT output: Bit7 to 1: %d\n",
+								cr_data);
 #endif
 }
 
@@ -94,18 +94,18 @@ static inline void pc87413_select_wdt_out (void)
 
 static inline void pc87413_enable_swc(void)
 {
-	unsigned int cr_data=0;
+	unsigned int cr_data = 0;
 
 	/* Step 2: Enable SWC functions */
 
-	outb_p(0x07, WDT_INDEX_IO_PORT);        /* Point SWC_LDN (LDN=4) */
+	outb_p(0x07, WDT_INDEX_IO_PORT);	/* Point SWC_LDN (LDN=4) */
 	outb_p(SWC_LDN, WDT_DATA_IO_PORT);
 
-	outb_p(0x30, WDT_INDEX_IO_PORT);        /* Read Index 0x30 First */
+	outb_p(0x30, WDT_INDEX_IO_PORT);	/* Read Index 0x30 First */
 	cr_data = inb(WDT_DATA_IO_PORT);
-	cr_data |= 0x01;                        /* Set Bit0 to 1 */
+	cr_data |= 0x01;			/* Set Bit0 to 1 */
 	outb_p(0x30, WDT_INDEX_IO_PORT);
-	outb_p(cr_data, WDT_DATA_IO_PORT);      /* Index0x30_bit0P1 */
+	outb_p(cr_data, WDT_DATA_IO_PORT);	/* Index0x30_bit0P1 */
 
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "pc87413 - Enable SWC functions\n");
@@ -121,20 +121,19 @@ static inline unsigned int pc87413_get_swc_base(void)
 
 	/* Step 3: Read SWC I/O Base Address */
 
-	outb_p(0x60, WDT_INDEX_IO_PORT);        /* Read Index 0x60 */
+	outb_p(0x60, WDT_INDEX_IO_PORT);	/* Read Index 0x60 */
 	addr_h = inb(WDT_DATA_IO_PORT);
 
-	outb_p(0x61, WDT_INDEX_IO_PORT);        /* Read Index 0x61 */
+	outb_p(0x61, WDT_INDEX_IO_PORT);	/* Read Index 0x61 */
 
 	addr_l = inb(WDT_DATA_IO_PORT);
 
 	swc_base_addr = (addr_h << 8) + addr_l;
-
 #ifdef DEBUG
-	printk(KERN_INFO DPFX "Read SWC I/O Base Address: low %d, high %d,"
-	                      " res %d\n", addr_l, addr_h, swc_base_addr);
+	printk(KERN_INFO DPFX
+		"Read SWC I/O Base Address: low %d, high %d, res %d\n",
+						addr_l, addr_h, swc_base_addr);
 #endif
-
 	return swc_base_addr;
 }
 
@@ -143,9 +142,7 @@ static inline unsigned int pc87413_get_swc_base(void)
 static inline void pc87413_swc_bank3(unsigned int swc_base_addr)
 {
 	/* Step 4: Select Bank3 of SWC */
-
 	outb_p(inb(swc_base_addr + 0x0f) | 0x03, swc_base_addr + 0x0f);
-
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "Select Bank3 of SWC\n");
 #endif
@@ -157,9 +154,7 @@ static inline void pc87413_programm_wdto(unsigned int swc_base_addr,
 					 char pc87413_time)
 {
 	/* Step 5: Programm WDTO, Twd. */
-
 	outb_p(pc87413_time, swc_base_addr + WDTO);
-
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "Set WDTO to %d minutes\n", pc87413_time);
 #endif
@@ -170,9 +165,7 @@ static inline void pc87413_programm_wdto(unsigned int swc_base_addr,
 static inline void pc87413_enable_wden(unsigned int swc_base_addr)
 {
 	/* Step 6: Enable WDEN */
-
-	outb_p(inb (swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL);
-
+	outb_p(inb(swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL);
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "Enable WDEN\n");
 #endif
@@ -182,9 +175,7 @@ static inline void pc87413_enable_wden(unsigned int swc_base_addr)
 static inline void pc87413_enable_sw_wd_tren(unsigned int swc_base_addr)
 {
 	/* Enable SW_WD_TREN */
-
-	outb_p(inb (swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG);
-
+	outb_p(inb(swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG);
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "Enable SW_WD_TREN\n");
 #endif
@@ -195,9 +186,7 @@ static inline void pc87413_enable_sw_wd_tren(unsigned int swc_base_addr)
 static inline void pc87413_disable_sw_wd_tren(unsigned int swc_base_addr)
 {
 	/* Disable SW_WD_TREN */
-
-	outb_p(inb (swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG);
-
+	outb_p(inb(swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG);
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "pc87413 - Disable SW_WD_TREN\n");
 #endif
@@ -208,9 +197,7 @@ static inline void pc87413_disable_sw_wd_tren(unsigned int swc_base_addr)
 static inline void pc87413_enable_sw_wd_trg(unsigned int swc_base_addr)
 {
 	/* Enable SW_WD_TRG */
-
-	outb_p(inb (swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL);
-
+	outb_p(inb(swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL);
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "pc87413 - Enable SW_WD_TRG\n");
 #endif
@@ -221,9 +208,7 @@ static inline void pc87413_enable_sw_wd_trg(unsigned int swc_base_addr)
 static inline void pc87413_disable_sw_wd_trg(unsigned int swc_base_addr)
 {
 	/* Disable SW_WD_TRG */
-
-	outb_p(inb (swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL);
-
+	outb_p(inb(swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL);
 #ifdef DEBUG
 	printk(KERN_INFO DPFX "Disable SW_WD_TRG\n");
 #endif
@@ -314,8 +299,8 @@ static int pc87413_open(struct inode *inode, struct file *file)
 	/* Reload and activate timer */
 	pc87413_refresh();
 
-	printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to"
-	                         " %d minute(s).\n", timeout);
+	printk(KERN_INFO MODNAME
+		"Watchdog enabled. Timeout set to %d minute(s).\n", timeout);
 
 	return nonseekable_open(inode, file);
 }
@@ -338,17 +323,15 @@ static int pc87413_release(struct inode *inode, struct file *file)
 
 	if (expect_close == 42) {
 		pc87413_disable();
-		printk(KERN_INFO MODNAME "Watchdog disabled,"
-		                         " sleeping again...\n");
+		printk(KERN_INFO MODNAME
+				"Watchdog disabled, sleeping again...\n");
 	} else {
-		printk(KERN_CRIT MODNAME "Unexpected close, not stopping"
-		                         " watchdog!\n");
+		printk(KERN_CRIT MODNAME
+				"Unexpected close, not stopping watchdog!\n");
 		pc87413_refresh();
 	}
-
 	clear_bit(0, &timer_enabled);
 	expect_close = 0;
-
 	return 0;
 }
 
@@ -386,10 +369,11 @@ static ssize_t pc87413_write(struct file *file, const char __user *data,
 			/* reset expect flag */
 			expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the
+			   magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -404,7 +388,6 @@ static ssize_t pc87413_write(struct file *file, const char __user *data,
 
 /**
  *	pc87413_ioctl:
- *	@inode: inode of the device
  *	@file: file handle to the device
  *	@cmd: watchdog command
  *	@arg: argument pointer
@@ -414,8 +397,8 @@ static ssize_t pc87413_write(struct file *file, const char __user *data,
  *	querying capabilities and current status.
  */
 
-static int pc87413_ioctl(struct inode *inode, struct file *file,
-			 unsigned int cmd, unsigned long arg)
+static long pc87413_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	int new_timeout;
 
@@ -426,75 +409,58 @@ static int pc87413_ioctl(struct inode *inode, struct file *file,
 
 	static struct watchdog_info ident = {
 		.options          = WDIOF_KEEPALIVEPING |
-		                    WDIOF_SETTIMEOUT |
-		                    WDIOF_MAGICCLOSE,
+				    WDIOF_SETTIMEOUT |
+				    WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
-		.identity         = "PC87413(HF/F) watchdog"
+		.identity         = "PC87413(HF/F) watchdog",
 	};
 
 	uarg.i = (int __user *)arg;
 
-	switch(cmd) {
-		default:
-			return -ENOTTY;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(uarg.ident, &ident,
-				sizeof(ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-			return put_user(pc87413_status(), uarg.i);
-
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, uarg.i);
-
-		case WDIOC_KEEPALIVE:
-			pc87413_refresh();
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident, &ident,
+					sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		return put_user(pc87413_status(), uarg.i);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
+		if (get_user(options, uarg.i))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			pc87413_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			pc87413_enable();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		pc87413_refresh();
 #ifdef DEBUG
-	                printk(KERN_INFO DPFX "keepalive\n");
+		printk(KERN_INFO DPFX "keepalive\n");
 #endif
-			return 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_timeout, uarg.i))
-				return -EFAULT;
-
-			// the API states this is given in secs
-			new_timeout /= 60;
-
-			if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
-				return -EINVAL;
-
-			timeout = new_timeout;
-			pc87413_refresh();
-
-			// fall through and return the new timeout...
-
-		case WDIOC_GETTIMEOUT:
-
-		        new_timeout = timeout * 60;
-
-			return put_user(new_timeout, uarg.i);
-
-		case WDIOC_SETOPTIONS:
-		{
-			int options, retval = -EINVAL;
-
-			if (get_user(options, uarg.i))
-				return -EFAULT;
-
-			if (options & WDIOS_DISABLECARD) {
-			        pc87413_disable();
-				retval = 0;
-			}
-
-			if (options & WDIOS_ENABLECARD) {
-				pc87413_enable();
-				retval = 0;
-			}
-
-			return retval;
-		}
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+		/* the API states this is given in secs */
+		new_timeout /= 60;
+		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		timeout = new_timeout;
+		pc87413_refresh();
+		/* fall through and return the new timeout... */
+	case WDIOC_GETTIMEOUT:
+		new_timeout = timeout * 60;
+		return put_user(new_timeout, uarg.i);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -517,10 +483,8 @@ static int pc87413_notify_sys(struct notifier_block *this,
 			      void *unused)
 {
 	if (code == SYS_DOWN || code == SYS_HALT)
-	{
 		/* Turn the card off */
 		pc87413_disable();
-	}
 	return NOTIFY_DONE;
 }
 
@@ -530,21 +494,19 @@ static const struct file_operations pc87413_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= pc87413_write,
-	.ioctl		= pc87413_ioctl,
+	.unlocked_ioctl	= pc87413_ioctl,
 	.open		= pc87413_open,
 	.release	= pc87413_release,
 };
 
-static struct notifier_block pc87413_notifier =
-{
+static struct notifier_block pc87413_notifier = {
 	.notifier_call  = pc87413_notify_sys,
 };
 
-static struct miscdevice pc87413_miscdev=
-{
+static struct miscdevice pc87413_miscdev = {
 	.minor          = WATCHDOG_MINOR,
 	.name           = "watchdog",
-	.fops           = &pc87413_fops
+	.fops           = &pc87413_fops,
 };
 
 /* -- Module init functions -------------------------------------*/
@@ -561,29 +523,26 @@ static int __init pc87413_init(void)
 {
 	int ret;
 
-	printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT);
+	printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n",
+							WDT_INDEX_IO_PORT);
 
 	/* request_region(io, 2, "pc87413"); */
 
 	ret = register_reboot_notifier(&pc87413_notifier);
 	if (ret != 0) {
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 	}
 
 	ret = misc_register(&pc87413_miscdev);
-
 	if (ret != 0) {
 		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
 			WATCHDOG_MINOR, ret);
 		unregister_reboot_notifier(&pc87413_notifier);
 		return ret;
 	}
-
 	printk(KERN_INFO PFX "initialized. timeout=%d min \n", timeout);
-
 	pc87413_enable();
-
 	return 0;
 }
 
@@ -600,17 +559,16 @@ static int __init pc87413_init(void)
 static void __exit pc87413_exit(void)
 {
 	/* Stop the timer before we leave */
-	if (!nowayout)
-	{
+	if (!nowayout) {
 		pc87413_disable();
 		printk(KERN_INFO MODNAME "Watchdog disabled.\n");
 	}
 
 	misc_deregister(&pc87413_miscdev);
 	unregister_reboot_notifier(&pc87413_notifier);
-	/* release_region(io,2); */
+	/* release_region(io, 2); */
 
-	printk(MODNAME " watchdog component driver removed.\n");
+	printk(KERN_INFO MODNAME " watchdog component driver removed.\n");
 }
 
 module_init(pc87413_init);
@@ -626,8 +584,12 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(io) ").");
 
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes (default=" __MODULE_STRING(timeout) ").");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in minutes (default="
+				__MODULE_STRING(timeout) ").");
 
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c
index 7b41434fac8..9e1331a3b21 100644
--- a/drivers/watchdog/pcwd.c
+++ b/drivers/watchdog/pcwd.c
@@ -40,13 +40,15 @@
  *		fairly useless proc entry.
  * 990610	removed said useless proc code for the merge <alan>
  * 000403	Removed last traces of proc code. <davej>
- * 011214	Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com>
+ * 011214	Added nowayout module option to override
+ *		CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com>
  *              Added timeout module option to override default
  */
 
 /*
  *	A bells and whistles driver is available from http://www.pcwd.de/
- *	More info available at http://www.berkprod.com/ or http://www.pcwatchdog.com/
+ *	More info available at http://www.berkprod.com/ or
+ *	http://www.pcwatchdog.com/
  */
 
 #include <linux/module.h>	/* For module specific items */
@@ -65,9 +67,8 @@
 #include <linux/isa.h>		/* For isa devices */
 #include <linux/ioport.h>	/* For io-port access */
 #include <linux/spinlock.h>	/* For spin_lock/spin_unlock/... */
-
-#include <asm/uaccess.h>	/* For copy_to_user/put_user/... */
-#include <asm/io.h>		/* For inb/outb/... */
+#include <linux/uaccess.h>	/* For copy_to_user/put_user/... */
+#include <linux/io.h>		/* For inb/outb/... */
 
 /* Module and version information */
 #define WATCHDOG_VERSION "1.20"
@@ -111,14 +112,16 @@ static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
 #define WD_REVC_WTRP		0x01	/* Watchdog Trip status */
 #define WD_REVC_HRBT		0x02	/* Watchdog Heartbeat */
 #define WD_REVC_TTRP		0x04	/* Temperature Trip status */
-#define WD_REVC_RL2A		0x08	/* Relay 2 activated by on-board processor */
+#define WD_REVC_RL2A		0x08	/* Relay 2 activated by
+							on-board processor */
 #define WD_REVC_RL1A		0x10	/* Relay 1 active */
 #define WD_REVC_R2DS		0x40	/* Relay 2 disable */
 #define WD_REVC_RLY2		0x80	/* Relay 2 activated? */
 /* Port 2 : Control Status #2 */
 #define WD_WDIS			0x10	/* Watchdog Disabled */
 #define WD_ENTP			0x20	/* Watchdog Enable Temperature Trip */
-#define WD_SSEL			0x40	/* Watchdog Switch Select (1:SW1 <-> 0:SW2) */
+#define WD_SSEL			0x40	/* Watchdog Switch Select
+							(1:SW1 <-> 0:SW2) */
 #define WD_WCMD			0x80	/* Watchdog Command Mode */
 
 /* max. time we give an ISA watchdog card to process a command */
@@ -142,7 +145,7 @@ static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
 #define CMD_ISA_RESET_RELAYS		0x0D
 
 /* Watchdog's Dip Switch heartbeat values */
-static const int heartbeat_tbl [] = {
+static const int heartbeat_tbl[] = {
 	20,	/* OFF-OFF-OFF	= 20 Sec  */
 	40,	/* OFF-OFF-ON	= 40 Sec  */
 	60,	/* OFF-ON-OFF	=  1 Min  */
@@ -165,14 +168,18 @@ static const int heartbeat_tbl [] = {
 static int cards_found;
 
 /* internal variables */
-static atomic_t open_allowed = ATOMIC_INIT(1);
+static unsigned long open_allowed;
 static char expect_close;
 static int temp_panic;
-static struct {				/* this is private data for each ISA-PC watchdog card */
+
+/* this is private data for each ISA-PC watchdog card */
+static struct {
 	char fw_ver_str[6];		/* The cards firmware version */
 	int revision;			/* The card's revision */
-	int supports_temp;		/* Wether or not the card has a temperature device */
-	int command_mode;		/* Wether or not the card is in command mode */
+	int supports_temp;		/* Whether or not the card has
+						a temperature device */
+	int command_mode;		/* Whether or not the card is in
+						command mode */
 	int boot_status;		/* The card's boot status */
 	int io_addr;			/* The cards I/O address */
 	spinlock_t io_lock;		/* the lock for io operations */
@@ -186,16 +193,20 @@ static struct {				/* this is private data for each ISA-PC watchdog card */
 #define DEBUG	2	/* print fancy stuff too */
 static int debug = QUIET;
 module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
+MODULE_PARM_DESC(debug,
+		"Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
 
-#define WATCHDOG_HEARTBEAT 0		/* default heartbeat = delay-time from dip-switches */
+/* default heartbeat = delay-time from dip-switches */
+#define WATCHDOG_HEARTBEAT 0
 static int heartbeat = WATCHDOG_HEARTBEAT;
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<=heartbeat<=7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Internal functions
@@ -224,7 +235,7 @@ static int send_isa_command(int cmd)
 		if (port0 == last_port0)
 			break;	/* Data is stable */
 
-		udelay (250);
+		udelay(250);
 	}
 
 	if (debug >= DEBUG)
@@ -236,7 +247,7 @@ static int send_isa_command(int cmd)
 
 static int set_command_mode(void)
 {
-	int i, found=0, count=0;
+	int i, found = 0, count = 0;
 
 	/* Set the card into command mode */
 	spin_lock(&pcwd_private.io_lock);
@@ -261,7 +272,7 @@ static int set_command_mode(void)
 		printk(KERN_DEBUG PFX "command_mode=%d\n",
 				pcwd_private.command_mode);
 
-	return(found);
+	return found;
 }
 
 static void unset_command_mode(void)
@@ -296,7 +307,8 @@ static inline void pcwd_get_firmware(void)
 		ten = send_isa_command(CMD_ISA_VERSION_TENTH);
 		hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH);
 		minor = send_isa_command(CMD_ISA_VERSION_MINOR);
-		sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c", one, ten, hund, minor);
+		sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c",
+					one, ten, hund, minor);
 	}
 	unset_command_mode();
 
@@ -305,7 +317,7 @@ static inline void pcwd_get_firmware(void)
 
 static inline int pcwd_get_option_switches(void)
 {
-	int option_switches=0;
+	int option_switches = 0;
 
 	if (set_command_mode()) {
 		/* Get switch settings */
@@ -313,7 +325,7 @@ static inline int pcwd_get_option_switches(void)
 	}
 
 	unset_command_mode();
-	return(option_switches);
+	return option_switches;
 }
 
 static void pcwd_show_card_info(void)
@@ -322,7 +334,9 @@ static void pcwd_show_card_info(void)
 
 	/* Get some extra info from the hardware (in command/debug/diag mode) */
 	if (pcwd_private.revision == PCWD_REVISION_A)
-		printk(KERN_INFO PFX "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", pcwd_private.io_addr);
+		printk(KERN_INFO PFX
+			"ISA-PC Watchdog (REV.A) detected at port 0x%04x\n",
+							pcwd_private.io_addr);
 	else if (pcwd_private.revision == PCWD_REVISION_C) {
 		pcwd_get_firmware();
 		printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n",
@@ -347,12 +361,15 @@ static void pcwd_show_card_info(void)
 		printk(KERN_INFO PFX "Previous reboot was caused by the card\n");
 
 	if (pcwd_private.boot_status & WDIOF_OVERHEAT) {
-		printk(KERN_EMERG PFX "Card senses a CPU Overheat. Panicking!\n");
-		printk(KERN_EMERG PFX "CPU Overheat\n");
+		printk(KERN_EMERG PFX
+			"Card senses a CPU Overheat. Panicking!\n");
+		printk(KERN_EMERG PFX
+			"CPU Overheat\n");
 	}
 
 	if (pcwd_private.boot_status == 0)
-		printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n");
+		printk(KERN_INFO PFX
+			"No previous trip detected - Cold boot or reset\n");
 }
 
 static void pcwd_timer_ping(unsigned long data)
@@ -361,11 +378,12 @@ static void pcwd_timer_ping(unsigned long data)
 
 	/* If we got a heartbeat pulse within the WDT_INTERVAL
 	 * we agree to ping the WDT */
-	if(time_before(jiffies, pcwd_private.next_heartbeat)) {
+	if (time_before(jiffies, pcwd_private.next_heartbeat)) {
 		/* Ping the watchdog */
 		spin_lock(&pcwd_private.io_lock);
 		if (pcwd_private.revision == PCWD_REVISION_A) {
-			/*  Rev A cards are reset by setting the WD_WDRST bit in register 1 */
+			/*  Rev A cards are reset by setting the
+			    WD_WDRST bit in register 1 */
 			wdrst_stat = inb_p(pcwd_private.io_addr);
 			wdrst_stat &= 0x0F;
 			wdrst_stat |= WD_WDRST;
@@ -381,7 +399,8 @@ static void pcwd_timer_ping(unsigned long data)
 
 		spin_unlock(&pcwd_private.io_lock);
 	} else {
-		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
+		printk(KERN_WARNING PFX
+			"Heartbeat lost! Will not ping the watchdog\n");
 	}
 }
 
@@ -454,7 +473,7 @@ static int pcwd_keepalive(void)
 
 static int pcwd_set_heartbeat(int t)
 {
-	if ((t < 2) || (t > 7200)) /* arbitrary upper limit */
+	if (t < 2 || t > 7200) /* arbitrary upper limit */
 		return -EINVAL;
 
 	heartbeat = t;
@@ -470,7 +489,7 @@ static int pcwd_get_status(int *status)
 {
 	int control_status;
 
-	*status=0;
+	*status = 0;
 	spin_lock(&pcwd_private.io_lock);
 	if (pcwd_private.revision == PCWD_REVISION_A)
 		/* Rev A cards return status information from
@@ -494,9 +513,9 @@ static int pcwd_get_status(int *status)
 		if (control_status & WD_T110) {
 			*status |= WDIOF_OVERHEAT;
 			if (temp_panic) {
-				printk(KERN_INFO PFX "Temperature overheat trip!\n");
+				printk(KERN_INFO PFX
+					"Temperature overheat trip!\n");
 				kernel_power_off();
-				/* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
 			}
 		}
 	} else {
@@ -506,9 +525,9 @@ static int pcwd_get_status(int *status)
 		if (control_status & WD_REVC_TTRP) {
 			*status |= WDIOF_OVERHEAT;
 			if (temp_panic) {
-				printk(KERN_INFO PFX "Temperature overheat trip!\n");
+				printk(KERN_INFO PFX
+					"Temperature overheat trip!\n");
 				kernel_power_off();
-				/* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
 			}
 		}
 	}
@@ -524,18 +543,21 @@ static int pcwd_clear_status(void)
 		spin_lock(&pcwd_private.io_lock);
 
 		if (debug >= VERBOSE)
-			printk(KERN_INFO PFX "clearing watchdog trip status\n");
+			printk(KERN_INFO PFX
+					"clearing watchdog trip status\n");
 
 		control_status = inb_p(pcwd_private.io_addr + 1);
 
 		if (debug >= DEBUG) {
-			printk(KERN_DEBUG PFX "status was: 0x%02x\n", control_status);
+			printk(KERN_DEBUG PFX "status was: 0x%02x\n",
+				control_status);
 			printk(KERN_DEBUG PFX "sending: 0x%02x\n",
 				(control_status & WD_REVC_R2DS));
 		}
 
 		/* clear reset status & Keep Relay 2 disable state as it is */
-		outb_p((control_status & WD_REVC_R2DS), pcwd_private.io_addr + 1);
+		outb_p((control_status & WD_REVC_R2DS),
+						pcwd_private.io_addr + 1);
 
 		spin_unlock(&pcwd_private.io_lock);
 	}
@@ -572,8 +594,7 @@ static int pcwd_get_temperature(int *temperature)
  *	/dev/watchdog handling
  */
 
-static int pcwd_ioctl(struct inode *inode, struct file *file,
-		      unsigned int cmd, unsigned long arg)
+static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int rv;
 	int status;
@@ -590,12 +611,9 @@ static int pcwd_ioctl(struct inode *inode, struct file *file,
 		.identity =		"PCWD",
 	};
 
-	switch(cmd) {
-	default:
-		return -ENOTTY;
-
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if(copy_to_user(argp, &ident, sizeof(ident)))
+		if (copy_to_user(argp, &ident, sizeof(ident)))
 			return -EFAULT;
 		return 0;
 
@@ -613,25 +631,22 @@ static int pcwd_ioctl(struct inode *inode, struct file *file,
 		return put_user(temperature, argp);
 
 	case WDIOC_SETOPTIONS:
-		if (pcwd_private.revision == PCWD_REVISION_C)
-		{
-			if(copy_from_user(&rv, argp, sizeof(int)))
+		if (pcwd_private.revision == PCWD_REVISION_C) {
+			if (get_user(rv, argp))
 				return -EFAULT;
 
-			if (rv & WDIOS_DISABLECARD)
-			{
-				return pcwd_stop();
+			if (rv & WDIOS_DISABLECARD) {
+				status = pcwd_stop();
+				if (status < 0)
+					return status;
 			}
-
-			if (rv & WDIOS_ENABLECARD)
-			{
-				return pcwd_start();
+			if (rv & WDIOS_ENABLECARD) {
+				status = pcwd_start();
+				if (status < 0)
+					return status;
 			}
-
 			if (rv & WDIOS_TEMPPANIC)
-			{
 				temp_panic = 1;
-			}
 		}
 		return -EINVAL;
 
@@ -651,6 +666,9 @@ static int pcwd_ioctl(struct inode *inode, struct file *file,
 
 	case WDIOC_GETTIMEOUT:
 		return put_user(heartbeat, argp);
+
+	default:
+		return -ENOTTY;
 	}
 
 	return 0;
@@ -682,16 +700,10 @@ static ssize_t pcwd_write(struct file *file, const char __user *buf, size_t len,
 
 static int pcwd_open(struct inode *inode, struct file *file)
 {
-	if (!atomic_dec_and_test(&open_allowed) ) {
-		if (debug >= VERBOSE)
-			printk(KERN_ERR PFX "Attempt to open already opened device.\n");
-		atomic_inc( &open_allowed );
+	if (test_and_set_bit(0, &open_allowed))
 		return -EBUSY;
-	}
-
 	if (nowayout)
 		__module_get(THIS_MODULE);
-
 	/* Activate */
 	pcwd_start();
 	pcwd_keepalive();
@@ -700,14 +712,15 @@ static int pcwd_open(struct inode *inode, struct file *file)
 
 static int pcwd_close(struct inode *inode, struct file *file)
 {
-	if (expect_close == 42) {
+	if (expect_close == 42)
 		pcwd_stop();
-	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		pcwd_keepalive();
 	}
 	expect_close = 0;
-	atomic_inc( &open_allowed );
+	clear_bit(0, &open_allowed);
 	return 0;
 }
 
@@ -750,7 +763,7 @@ static const struct file_operations pcwd_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= pcwd_write,
-	.ioctl		= pcwd_ioctl,
+	.unlocked_ioctl	= pcwd_ioctl,
 	.open		= pcwd_open,
 	.release	= pcwd_close,
 };
@@ -788,7 +801,7 @@ static inline int get_revision(void)
 	 * presumes a floating bus reads as 0xff. */
 	if ((inb(pcwd_private.io_addr + 2) == 0xFF) ||
 	    (inb(pcwd_private.io_addr + 3) == 0xFF))
-		r=PCWD_REVISION_A;
+		r = PCWD_REVISION_A;
 	spin_unlock(&pcwd_private.io_lock);
 
 	return r;
@@ -803,7 +816,7 @@ static inline int get_revision(void)
  */
 static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
 {
-	int base_addr=pcwd_ioports[id];
+	int base_addr = pcwd_ioports[id];
 	int port0, last_port0;	/* Reg 0, in case it's REV A */
 	int port1, last_port1;	/* Register 1 for REV C cards */
 	int i;
@@ -813,7 +826,7 @@ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
 		printk(KERN_DEBUG PFX "pcwd_isa_match id=%d\n",
 			id);
 
-	if (!request_region (base_addr, 4, "PCWD")) {
+	if (!request_region(base_addr, 4, "PCWD")) {
 		printk(KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr);
 		return 0;
 	}
@@ -842,7 +855,7 @@ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
 			}
 		}
 	}
-	release_region (base_addr, 4);
+	release_region(base_addr, 4);
 
 	return retval;
 }
@@ -857,7 +870,8 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
 
 	cards_found++;
 	if (cards_found == 1)
-		printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n", WD_VER);
+		printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n",
+								WD_VER);
 
 	if (cards_found > 1) {
 		printk(KERN_ERR PFX "This driver only supports 1 device\n");
@@ -875,10 +889,11 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
 	/* Check card's revision */
 	pcwd_private.revision = get_revision();
 
-	if (!request_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
+	if (!request_region(pcwd_private.io_addr,
+		(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			pcwd_private.io_addr);
-		ret=-EIO;
+		ret = -EIO;
 		goto error_request_region;
 	}
 
@@ -908,26 +923,30 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
 	if (heartbeat == 0)
 		heartbeat = heartbeat_tbl[(pcwd_get_option_switches() & 0x07)];
 
-	/* Check that the heartbeat value is within it's range ; if not reset to the default */
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
 	if (pcwd_set_heartbeat(heartbeat)) {
 		pcwd_set_heartbeat(WATCHDOG_HEARTBEAT);
-		printk(KERN_INFO PFX "heartbeat value must be 2<=heartbeat<=7200, using %d\n",
-			WATCHDOG_HEARTBEAT);
+		printk(KERN_INFO PFX
+		  "heartbeat value must be 2 <= heartbeat <= 7200, using %d\n",
+							WATCHDOG_HEARTBEAT);
 	}
 
 	if (pcwd_private.supports_temp) {
 		ret = misc_register(&temp_miscdev);
 		if (ret) {
-			printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-				TEMP_MINOR, ret);
+			printk(KERN_ERR PFX
+			    "cannot register miscdev on minor=%d (err=%d)\n",
+							TEMP_MINOR, ret);
 			goto error_misc_register_temp;
 		}
 	}
 
 	ret = misc_register(&pcwd_miscdev);
 	if (ret) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+					WATCHDOG_MINOR, ret);
 		goto error_misc_register_watchdog;
 	}
 
@@ -940,7 +959,8 @@ error_misc_register_watchdog:
 	if (pcwd_private.supports_temp)
 		misc_deregister(&temp_miscdev);
 error_misc_register_temp:
-	release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+	release_region(pcwd_private.io_addr,
+			(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
 error_request_region:
 	pcwd_private.io_addr = 0x0000;
 	cards_found--;
@@ -964,7 +984,8 @@ static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id)
 	misc_deregister(&pcwd_miscdev);
 	if (pcwd_private.supports_temp)
 		misc_deregister(&temp_miscdev);
-	release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+	release_region(pcwd_private.io_addr,
+			(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
 	pcwd_private.io_addr = 0x0000;
 	cards_found--;
 
diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c
index 61a89e95964..90eb1d4271d 100644
--- a/drivers/watchdog/pcwd_pci.c
+++ b/drivers/watchdog/pcwd_pci.c
@@ -46,9 +46,8 @@
 #include <linux/pci.h>		/* For pci functions */
 #include <linux/ioport.h>	/* For io-port access */
 #include <linux/spinlock.h>	/* For spin_lock/spin_unlock/... */
-
-#include <asm/uaccess.h>	/* For copy_to_user/put_user/... */
-#include <asm/io.h>		/* For inb/outb/... */
+#include <linux/uaccess.h>	/* For copy_to_user/put_user/... */
+#include <linux/io.h>		/* For inb/outb/... */
 
 /* Module and version information */
 #define WATCHDOG_VERSION "1.03"
@@ -97,7 +96,7 @@
 #define CMD_GET_CLEAR_RESET_COUNT		0x84
 
 /* Watchdog's Dip Switch heartbeat values */
-static const int heartbeat_tbl [] = {
+static const int heartbeat_tbl[] = {
 	5,	/* OFF-OFF-OFF	=  5 Sec  */
 	10,	/* OFF-OFF-ON	= 10 Sec  */
 	30,	/* OFF-ON-OFF	= 30 Sec  */
@@ -220,11 +219,10 @@ static void pcipcwd_show_card_info(void)
 	int option_switches;
 
 	got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor);
-	if (got_fw_rev) {
+	if (got_fw_rev)
 		sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
-	} else {
+	else
 		sprintf(fw_ver_str, "<card no answer>");
-	}
 
 	/* Get switch settings */
 	option_switches = pcipcwd_get_option_switches();
@@ -331,7 +329,7 @@ static int pcipcwd_get_status(int *status)
 {
 	int control_status;
 
-	*status=0;
+	*status = 0;
 	control_status = inb_p(pcipcwd_private.io_addr + 1);
 	if (control_status & WD_PCI_WTRP)
 		*status |= WDIOF_CARDRESET;
@@ -369,8 +367,8 @@ static int pcipcwd_clear_status(void)
 	outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP, pcipcwd_private.io_addr + 1);
 
 	/* clear reset counter */
-	msb=0;
-	reset_counter=0xff;
+	msb = 0;
+	reset_counter = 0xff;
 	send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter);
 
 	if (debug >= DEBUG) {
@@ -442,7 +440,7 @@ static ssize_t pcipcwd_write(struct file *file, const char __user *data,
 			/* scan to see whether or not we got the magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if(get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_release = 42;
@@ -455,8 +453,8 @@ static ssize_t pcipcwd_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int pcipcwd_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
+static long pcipcwd_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -471,92 +469,89 @@ static int pcipcwd_ioctl(struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-				sizeof (ident)) ? -EFAULT : 0;
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	{
+		int status;
+		pcipcwd_get_status(&status);
+		return put_user(status, p);
+	}
 
-		case WDIOC_GETSTATUS:
-		{
-			int status;
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(pcipcwd_private.boot_status, p);
 
-			pcipcwd_get_status(&status);
+	case WDIOC_GETTEMP:
+	{
+		int temperature;
 
-			return put_user(status, p);
-		}
+		if (pcipcwd_get_temperature(&temperature))
+			return -EFAULT;
 
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(pcipcwd_private.boot_status, p);
+		return put_user(temperature, p);
+	}
 
-		case WDIOC_GETTEMP:
-		{
-			int temperature;
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
 
-			if (pcipcwd_get_temperature(&temperature))
-				return -EFAULT;
+		if (get_user(new_options, p))
+			return -EFAULT;
 
-			return put_user(temperature, p);
+		if (new_options & WDIOS_DISABLECARD) {
+			if (pcipcwd_stop())
+				return -EIO;
+			retval = 0;
 		}
 
-		case WDIOC_KEEPALIVE:
-			pcipcwd_keepalive();
-			return 0;
-
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if (get_user (new_options, p))
-				return -EFAULT;
-
-			if (new_options & WDIOS_DISABLECARD) {
-				if (pcipcwd_stop())
-					return -EIO;
-				retval = 0;
-			}
+		if (new_options & WDIOS_ENABLECARD) {
+			if (pcipcwd_start())
+				return -EIO;
+			retval = 0;
+		}
 
-			if (new_options & WDIOS_ENABLECARD) {
-				if (pcipcwd_start())
-					return -EIO;
-				retval = 0;
-			}
+		if (new_options & WDIOS_TEMPPANIC) {
+			temp_panic = 1;
+			retval = 0;
+		}
 
-			if (new_options & WDIOS_TEMPPANIC) {
-				temp_panic = 1;
-				retval = 0;
-			}
+		return retval;
+	}
 
-			return retval;
-		}
+	case WDIOC_KEEPALIVE:
+		pcipcwd_keepalive();
+		return 0;
 
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_heartbeat;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_heartbeat;
 
-			if (get_user(new_heartbeat, p))
-				return -EFAULT;
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
 
-			if (pcipcwd_set_heartbeat(new_heartbeat))
-			    return -EINVAL;
+		if (pcipcwd_set_heartbeat(new_heartbeat))
+		    return -EINVAL;
 
-			pcipcwd_keepalive();
-			/* Fall */
-		}
+		pcipcwd_keepalive();
+		/* Fall */
+	}
 
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
 
-		case WDIOC_GETTIMELEFT:
-		{
-			int time_left;
+	case WDIOC_GETTIMELEFT:
+	{
+		int time_left;
 
-			if (pcipcwd_get_timeleft(&time_left))
-				return -EFAULT;
+		if (pcipcwd_get_timeleft(&time_left))
+			return -EFAULT;
 
-			return put_user(time_left, p);
-		}
+		return put_user(time_left, p);
+	}
 
-		default:
-			return -ENOTTY;
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -603,7 +598,7 @@ static ssize_t pcipcwd_temp_read(struct file *file, char __user *data,
 	if (pcipcwd_get_temperature(&temperature))
 		return -EFAULT;
 
-	if (copy_to_user (data, &temperature, 1))
+	if (copy_to_user(data, &temperature, 1))
 		return -EFAULT;
 
 	return 1;
@@ -628,10 +623,8 @@ static int pcipcwd_temp_release(struct inode *inode, struct file *file)
 
 static int pcipcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT) {
-		/* Turn the WDT off */
-		pcipcwd_stop();
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		pcipcwd_stop();	/* Turn the WDT off */
 
 	return NOTIFY_DONE;
 }
@@ -644,7 +637,7 @@ static const struct file_operations pcipcwd_fops = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
 	.write =	pcipcwd_write,
-	.ioctl =	pcipcwd_ioctl,
+	.unlocked_ioctl = pcipcwd_ioctl,
 	.open =		pcipcwd_open,
 	.release =	pcipcwd_release,
 };
diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
index bf443d077a1..c1685c942de 100644
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -40,8 +40,7 @@
 #include <linux/slab.h>		/* For kmalloc, ... */
 #include <linux/mutex.h>	/* For mutex locking */
 #include <linux/hid.h>		/* For HID_REQ_SET_REPORT & HID_DT_REPORT */
-
-#include <asm/uaccess.h>	/* For copy_to_user/put_user/... */
+#include <linux/uaccess.h>	/* For copy_to_user/put_user/... */
 
 
 #ifdef CONFIG_USB_DEBUG
@@ -88,7 +87,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _
 #define USB_PCWD_PRODUCT_ID	0x1140
 
 /* table of devices that work with this driver */
-static struct usb_device_id usb_pcwd_table [] = {
+static struct usb_device_id usb_pcwd_table[] = {
 	{ USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
@@ -110,7 +109,7 @@ MODULE_DEVICE_TABLE (usb, usb_pcwd_table);
 #define CMD_DISABLE_WATCHDOG		CMD_ENABLE_WATCHDOG
 
 /* Watchdog's Dip Switch heartbeat values */
-static const int heartbeat_tbl [] = {
+static const int heartbeat_tbl[] = {
 	5,	/* OFF-OFF-OFF	=  5 Sec  */
 	10,	/* OFF-OFF-ON	= 10 Sec  */
 	30,	/* OFF-ON-OFF	= 30 Sec  */
@@ -130,15 +129,15 @@ static char expect_release;
 
 /* Structure to hold all of our device specific stuff */
 struct usb_pcwd_private {
-	struct usb_device *	udev;			/* save off the usb device pointer */
-	struct usb_interface *	interface;		/* the interface for this device */
+	struct usb_device	*udev;			/* save off the usb device pointer */
+	struct usb_interface	*interface;		/* the interface for this device */
 
 	unsigned int		interface_number;	/* the interface number used for cmd's */
 
-	unsigned char *		intr_buffer;		/* the buffer to intr data */
+	unsigned char		*intr_buffer;		/* the buffer to intr data */
 	dma_addr_t		intr_dma;		/* the dma address for the intr buffer */
 	size_t			intr_size;		/* the size of the intr buffer */
-	struct urb *		intr_urb;		/* the urb used for the intr pipe */
+	struct urb		*intr_urb;		/* the urb used for the intr pipe */
 
 	unsigned char		cmd_command;		/* The command that is reported back */
 	unsigned char		cmd_data_msb;		/* The data MSB that is reported back */
@@ -154,8 +153,8 @@ static struct usb_pcwd_private *usb_pcwd_device;
 static DEFINE_MUTEX(disconnect_mutex);
 
 /* local function prototypes */
-static int usb_pcwd_probe	(struct usb_interface *interface, const struct usb_device_id *id);
-static void usb_pcwd_disconnect	(struct usb_interface *interface);
+static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_device_id *id);
+static void usb_pcwd_disconnect(struct usb_interface *interface);
 
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver usb_pcwd_driver = {
@@ -195,10 +194,10 @@ static void usb_pcwd_intr_done(struct urb *urb)
 	usb_pcwd->cmd_data_lsb = data[2];
 
 	/* notify anyone waiting that the cmd has finished */
-	atomic_set (&usb_pcwd->cmd_received, 1);
+	atomic_set(&usb_pcwd->cmd_received, 1);
 
 resubmit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		printk(KERN_ERR PFX "can't resubmit intr, usb_submit_urb failed with result %d\n",
 			retval);
@@ -224,7 +223,7 @@ static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned cha
 	dbg("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
 		buf[0], buf[1], buf[2]);
 
-	atomic_set (&usb_pcwd->cmd_received, 0);
+	atomic_set(&usb_pcwd->cmd_received, 0);
 
 	if (usb_control_msg(usb_pcwd->udev, usb_sndctrlpipe(usb_pcwd->udev, 0),
 			HID_REQ_SET_REPORT, HID_DT_REPORT,
@@ -237,7 +236,7 @@ static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned cha
 	got_response = 0;
 	for (count = 0; (count < USB_COMMAND_TIMEOUT) && (!got_response); count++) {
 		mdelay(1);
-		if (atomic_read (&usb_pcwd->cmd_received))
+		if (atomic_read(&usb_pcwd->cmd_received))
 			got_response = 1;
 	}
 
@@ -356,7 +355,7 @@ static ssize_t usb_pcwd_write(struct file *file, const char __user *data,
 			/* scan to see whether or not we got the magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if(get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_release = 42;
@@ -369,8 +368,8 @@ static ssize_t usb_pcwd_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int usb_pcwd_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
+static long usb_pcwd_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -383,77 +382,76 @@ static int usb_pcwd_ioctl(struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-				sizeof (ident)) ? -EFAULT : 0;
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
 
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
 
-		case WDIOC_GETTEMP:
-		{
-			int temperature;
+	case WDIOC_GETTEMP:
+	{
+		int temperature;
 
-			if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature))
-				return -EFAULT;
+		if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature))
+			return -EFAULT;
 
-			return put_user(temperature, p);
-		}
+		return put_user(temperature, p);
+	}
 
-		case WDIOC_KEEPALIVE:
-			usb_pcwd_keepalive(usb_pcwd_device);
-			return 0;
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
 
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
+		if (get_user(new_options, p))
+			return -EFAULT;
 
-			if (get_user (new_options, p))
-				return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			usb_pcwd_stop(usb_pcwd_device);
+			retval = 0;
+		}
 
-			if (new_options & WDIOS_DISABLECARD) {
-				usb_pcwd_stop(usb_pcwd_device);
-				retval = 0;
-			}
+		if (new_options & WDIOS_ENABLECARD) {
+			usb_pcwd_start(usb_pcwd_device);
+			retval = 0;
+		}
 
-			if (new_options & WDIOS_ENABLECARD) {
-				usb_pcwd_start(usb_pcwd_device);
-				retval = 0;
-			}
+		return retval;
+	}
 
-			return retval;
-		}
+	case WDIOC_KEEPALIVE:
+		usb_pcwd_keepalive(usb_pcwd_device);
+		return 0;
 
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_heartbeat;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_heartbeat;
 
-			if (get_user(new_heartbeat, p))
-				return -EFAULT;
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
 
-			if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat))
-			    return -EINVAL;
+		if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat))
+		    return -EINVAL;
 
-			usb_pcwd_keepalive(usb_pcwd_device);
-			/* Fall */
-		}
+		usb_pcwd_keepalive(usb_pcwd_device);
+		/* Fall */
+	}
 
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
 
-		case WDIOC_GETTIMELEFT:
-		{
-			int time_left;
+	case WDIOC_GETTIMELEFT:
+	{
+		int time_left;
 
-			if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left))
-				return -EFAULT;
+		if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left))
+			return -EFAULT;
 
-			return put_user(time_left, p);
-		}
+		return put_user(time_left, p);
+	}
 
-		default:
-			return -ENOTTY;
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -519,10 +517,8 @@ static int usb_pcwd_temperature_release(struct inode *inode, struct file *file)
 
 static int usb_pcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT) {
-		/* Turn the WDT off */
-		usb_pcwd_stop(usb_pcwd_device);
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		usb_pcwd_stop(usb_pcwd_device);	/* Turn the WDT off */
 
 	return NOTIFY_DONE;
 }
@@ -535,7 +531,7 @@ static const struct file_operations usb_pcwd_fops = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
 	.write =	usb_pcwd_write,
-	.ioctl =	usb_pcwd_ioctl,
+	.unlocked_ioctl = usb_pcwd_ioctl,
 	.open =		usb_pcwd_open,
 	.release =	usb_pcwd_release,
 };
@@ -567,13 +563,13 @@ static struct notifier_block usb_pcwd_notifier = {
 /**
  *	usb_pcwd_delete
  */
-static inline void usb_pcwd_delete (struct usb_pcwd_private *usb_pcwd)
+static inline void usb_pcwd_delete(struct usb_pcwd_private *usb_pcwd)
 {
 	usb_free_urb(usb_pcwd->intr_urb);
 	if (usb_pcwd->intr_buffer != NULL)
 		usb_buffer_free(usb_pcwd->udev, usb_pcwd->intr_size,
 				usb_pcwd->intr_buffer, usb_pcwd->intr_dma);
-	kfree (usb_pcwd);
+	kfree(usb_pcwd);
 }
 
 /**
@@ -626,7 +622,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
 	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 
 	/* allocate memory for our device and initialize it */
-	usb_pcwd = kzalloc (sizeof(struct usb_pcwd_private), GFP_KERNEL);
+	usb_pcwd = kzalloc(sizeof(struct usb_pcwd_private), GFP_KERNEL);
 	if (usb_pcwd == NULL) {
 		printk(KERN_ERR PFX "Out of memory\n");
 		goto error;
@@ -641,7 +637,8 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
 	usb_pcwd->intr_size = (le16_to_cpu(endpoint->wMaxPacketSize) > 8 ? le16_to_cpu(endpoint->wMaxPacketSize) : 8);
 
 	/* set up the memory buffer's */
-	if (!(usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, GFP_ATOMIC, &usb_pcwd->intr_dma))) {
+	usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, GFP_ATOMIC, &usb_pcwd->intr_dma);
+	if (!usb_pcwd->intr_buffer) {
 		printk(KERN_ERR PFX "Out of memory\n");
 		goto error;
 	}
@@ -675,11 +672,10 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
 
 	/* Get the Firmware Version */
 	got_fw_rev = usb_pcwd_send_command(usb_pcwd, CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor);
-	if (got_fw_rev) {
+	if (got_fw_rev)
 		sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
-	} else {
+	else
 		sprintf(fw_ver_str, "<card no answer>");
-	}
 
 	printk(KERN_INFO PFX "Found card (Firmware: %s) with temp option\n",
 		fw_ver_str);
@@ -725,7 +721,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
 	}
 
 	/* we can register the device now, as it is ready */
-	usb_set_intfdata (interface, usb_pcwd);
+	usb_set_intfdata(interface, usb_pcwd);
 
 	printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
 		heartbeat, nowayout);
@@ -759,8 +755,8 @@ static void usb_pcwd_disconnect(struct usb_interface *interface)
 	/* prevent races with open() */
 	mutex_lock(&disconnect_mutex);
 
-	usb_pcwd = usb_get_intfdata (interface);
-	usb_set_intfdata (interface, NULL);
+	usb_pcwd = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
 
 	mutex_lock(&usb_pcwd->mtx);
 
@@ -820,5 +816,5 @@ static void __exit usb_pcwd_exit(void)
 }
 
 
-module_init (usb_pcwd_init);
-module_exit (usb_pcwd_exit);
+module_init(usb_pcwd_init);
+module_exit(usb_pcwd_exit);
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 6b8483d3c78..0ed84162437 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -28,10 +28,9 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/spinlock.h>
-
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
 
 #define MODULE_NAME "PNX4008-WDT: "
 
@@ -144,9 +143,8 @@ static int pnx4008_wdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t
-pnx4008_wdt_write(struct file *file, const char *data, size_t len,
-		  loff_t * ppos)
+static ssize_t pnx4008_wdt_write(struct file *file, const char *data,
+					size_t len, loff_t *ppos)
 {
 	if (len) {
 		if (!nowayout) {
@@ -169,15 +167,14 @@ pnx4008_wdt_write(struct file *file, const char *data, size_t len,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
 	    WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity = "PNX4008 Watchdog",
 };
 
-static int
-pnx4008_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		  unsigned long arg)
+static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
@@ -196,6 +193,11 @@ pnx4008_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ret = put_user(boot_status, (int *)arg);
 		break;
 
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
 	case WDIOC_SETTIMEOUT:
 		ret = get_user(time, (int *)arg);
 		if (ret)
@@ -213,11 +215,6 @@ pnx4008_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	case WDIOC_GETTIMEOUT:
 		ret = put_user(heartbeat, (int *)arg);
 		break;
-
-	case WDIOC_KEEPALIVE:
-		wdt_enable();
-		ret = 0;
-		break;
 	}
 	return ret;
 }
@@ -238,7 +235,7 @@ static const struct file_operations pnx4008_wdt_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.write = pnx4008_wdt_write,
-	.ioctl = pnx4008_wdt_ioctl,
+	.unlocked_ioctl = pnx4008_wdt_ioctl,
 	.open = pnx4008_wdt_open,
 	.release = pnx4008_wdt_release,
 };
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
new file mode 100644
index 00000000000..6756bcb009e
--- /dev/null
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -0,0 +1,344 @@
+/*
+ *  IDT Interprise 79RC32434 watchdog driver
+ *
+ *  Copyright (C) 2006, Ondrej Zajicek <santiago@crfreenet.org>
+ *  Copyright (C) 2008, Florian Fainelli <florian@openwrt.org>
+ *
+ *  based on
+ *  SoftDog 0.05:	A Software Watchdog Device
+ *
+ *  (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/reboot.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/mach-rc32434/integ.h>
+
+#define MAX_TIMEOUT			20
+#define RC32434_WDT_INTERVAL		(15 * HZ)
+
+#define VERSION "0.2"
+
+static struct {
+	struct completion stop;
+	int running;
+	struct timer_list timer;
+	int queue;
+	int default_ticks;
+	unsigned long inuse;
+} rc32434_wdt_device;
+
+static struct integ __iomem *wdt_reg;
+static int ticks = 100 * HZ;
+
+static int expect_close;
+static int timeout;
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+
+static void rc32434_wdt_start(void)
+{
+	u32 val;
+
+	if (!rc32434_wdt_device.inuse) {
+		writel(0, &wdt_reg->wtcount);
+
+		val = RC32434_ERR_WRE;
+		writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+
+		val = RC32434_WTC_EN;
+		writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
+	}
+	rc32434_wdt_device.running++;
+}
+
+static void rc32434_wdt_stop(void)
+{
+	u32 val;
+
+	if (rc32434_wdt_device.running) {
+
+		val = ~RC32434_WTC_EN;
+		writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+
+		val = ~RC32434_ERR_WRE;
+		writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
+
+		rc32434_wdt_device.running = 0;
+	}
+}
+
+static void rc32434_wdt_set(int new_timeout)
+{
+	u32 cmp = new_timeout * HZ;
+	u32 state, val;
+
+	timeout = new_timeout;
+	/*
+	 * store and disable WTC
+	 */
+	state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
+	val = ~RC32434_WTC_EN;
+	writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+
+	writel(0, &wdt_reg->wtcount);
+	writel(cmp, &wdt_reg->wtcompare);
+
+	/*
+	 * restore WTC
+	 */
+
+	writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
+}
+
+static void rc32434_wdt_reset(void)
+{
+	ticks = rc32434_wdt_device.default_ticks;
+}
+
+static void rc32434_wdt_update(unsigned long unused)
+{
+	if (rc32434_wdt_device.running)
+		ticks--;
+
+	writel(0, &wdt_reg->wtcount);
+
+	if (rc32434_wdt_device.queue && ticks)
+		mod_timer(&rc32434_wdt_device.timer,
+			jiffies + RC32434_WDT_INTERVAL);
+	else
+		complete(&rc32434_wdt_device.stop);
+}
+
+static int rc32434_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rc32434_wdt_device.inuse))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	return nonseekable_open(inode, file);
+}
+
+static int rc32434_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close && nowayout == 0) {
+		rc32434_wdt_stop();
+		printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
+		module_put(THIS_MODULE);
+	} else
+		printk(KERN_CRIT KBUILD_MODNAME
+			": device closed unexpectedly. WDT will not stop !\n");
+
+	clear_bit(0, &rc32434_wdt_device.inuse);
+	return 0;
+}
+
+static ssize_t rc32434_wdt_write(struct file *file, const char *data,
+				size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 1;
+			}
+		}
+		rc32434_wdt_update(0);
+		return len;
+	}
+	return 0;
+}
+
+static int rc32434_wdt_ioctl(struct inode *inode, struct file *file,
+	unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int new_timeout;
+	unsigned int value;
+	static struct watchdog_info ident = {
+		.options =		WDIOF_SETTIMEOUT |
+					WDIOF_KEEPALIVEPING |
+					WDIOF_MAGICCLOSE,
+		.identity =		"RC32434_WDT Watchdog",
+	};
+	switch (cmd) {
+	case WDIOC_KEEPALIVE:
+		rc32434_wdt_reset();
+		break;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		value = readl(&wdt_reg->wtcount);
+		if (copy_to_user(argp, &value, sizeof(int)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&value, argp, sizeof(int)))
+			return -EFAULT;
+		switch (value) {
+		case WDIOS_ENABLECARD:
+			rc32434_wdt_start();
+			break;
+		case WDIOS_DISABLECARD:
+			rc32434_wdt_stop();
+		default:
+			return -EINVAL;
+		}
+		break;
+	case WDIOC_SETTIMEOUT:
+		if (copy_from_user(&new_timeout, argp, sizeof(int)))
+			return -EFAULT;
+		if (new_timeout < 1)
+			return -EINVAL;
+		if (new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		rc32434_wdt_set(new_timeout);
+	case WDIOC_GETTIMEOUT:
+		return copy_to_user(argp, &timeout, sizeof(int));
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static struct file_operations rc32434_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= rc32434_wdt_write,
+	.ioctl		= rc32434_wdt_ioctl,
+	.open		= rc32434_wdt_open,
+	.release	= rc32434_wdt_release,
+};
+
+static struct miscdevice rc32434_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rc32434_wdt_fops,
+};
+
+static char banner[] = KERN_INFO KBUILD_MODNAME
+		": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
+
+static int rc32434_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+	if (!r) {
+		printk(KERN_ERR KBUILD_MODNAME
+			"failed to retrieve resources\n");
+		return -ENODEV;
+	}
+
+	wdt_reg = ioremap_nocache(r->start, r->end - r->start);
+	if (!wdt_reg) {
+		printk(KERN_ERR KBUILD_MODNAME
+			"failed to remap I/O resources\n");
+		return -ENXIO;
+	}
+
+	ret = misc_register(&rc32434_wdt_miscdev);
+
+	if (ret < 0) {
+		printk(KERN_ERR KBUILD_MODNAME
+			"failed to register watchdog device\n");
+		goto unmap;
+	}
+
+	init_completion(&rc32434_wdt_device.stop);
+	rc32434_wdt_device.queue = 0;
+
+	clear_bit(0, &rc32434_wdt_device.inuse);
+
+	setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
+
+	rc32434_wdt_device.default_ticks = ticks;
+
+	rc32434_wdt_start();
+
+	printk(banner, timeout);
+
+	return 0;
+
+unmap:
+	iounmap(wdt_reg);
+	return ret;
+}
+
+static int rc32434_wdt_remove(struct platform_device *pdev)
+{
+	if (rc32434_wdt_device.queue) {
+		rc32434_wdt_device.queue = 0;
+		wait_for_completion(&rc32434_wdt_device.stop);
+	}
+	misc_deregister(&rc32434_wdt_miscdev);
+
+	iounmap(wdt_reg);
+
+	return 0;
+}
+
+static struct platform_driver rc32434_wdt = {
+	.probe	= rc32434_wdt_probe,
+	.remove = rc32434_wdt_remove,
+	.driver = {
+		.name = "rc32434_wdt",
+	}
+};
+
+static int __init rc32434_wdt_init(void)
+{
+	return platform_driver_register(&rc32434_wdt);
+}
+
+static void __exit rc32434_wdt_exit(void)
+{
+	platform_driver_unregister(&rc32434_wdt);
+}
+
+module_init(rc32434_wdt_init);
+module_exit(rc32434_wdt_exit);
+
+MODULE_AUTHOR("Ondrej Zajicek <santiago@crfreenet.org>,"
+		"Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("Driver for the IDT RC32434 SoC watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
new file mode 100644
index 00000000000..9108efa73e7
--- /dev/null
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -0,0 +1,285 @@
+/*
+ * RDC321x watchdog driver
+ *
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This driver is highly inspired from the cpu5_wdt driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/mach-rdc321x/rdc321x_defs.h>
+
+#define RDC_WDT_MASK	0x80000000 /* Mask */
+#define RDC_WDT_EN	0x00800000 /* Enable bit */
+#define RDC_WDT_WTI	0x00200000 /* Generate CPU reset/NMI/WDT on timeout */
+#define RDC_WDT_RST	0x00100000 /* Reset bit */
+#define RDC_WDT_WIF	0x00040000 /* WDT IRQ Flag */
+#define RDC_WDT_IRT	0x00000100 /* IRQ Routing table */
+#define RDC_WDT_CNT	0x00000001 /* WDT count */
+
+#define RDC_CLS_TMR	0x80003844 /* Clear timer */
+
+#define RDC_WDT_INTERVAL	(HZ/10+1)
+
+static int ticks = 1000;
+
+/* some device data */
+
+static struct {
+	struct completion stop;
+	int running;
+	struct timer_list timer;
+	int queue;
+	int default_ticks;
+	unsigned long inuse;
+	spinlock_t lock;
+} rdc321x_wdt_device;
+
+/* generic helper functions */
+
+static void rdc321x_wdt_trigger(unsigned long unused)
+{
+	unsigned long flags;
+
+	if (rdc321x_wdt_device.running)
+		ticks--;
+
+	/* keep watchdog alive */
+	spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+	outl(RDC_WDT_EN | inl(RDC3210_CFGREG_DATA),
+		RDC3210_CFGREG_DATA);
+	spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+
+	/* requeue?? */
+	if (rdc321x_wdt_device.queue && ticks)
+		mod_timer(&rdc321x_wdt_device.timer,
+				jiffies + RDC_WDT_INTERVAL);
+	else {
+		/* ticks doesn't matter anyway */
+		complete(&rdc321x_wdt_device.stop);
+	}
+
+}
+
+static void rdc321x_wdt_reset(void)
+{
+	ticks = rdc321x_wdt_device.default_ticks;
+}
+
+static void rdc321x_wdt_start(void)
+{
+	unsigned long flags;
+
+	if (!rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 1;
+
+		/* Clear the timer */
+		spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+		outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
+
+		/* Enable watchdog and set the timeout to 81.92 us */
+		outl(RDC_WDT_EN | RDC_WDT_CNT, RDC3210_CFGREG_DATA);
+		spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+
+		mod_timer(&rdc321x_wdt_device.timer,
+				jiffies + RDC_WDT_INTERVAL);
+	}
+
+	/* if process dies, counter is not decremented */
+	rdc321x_wdt_device.running++;
+}
+
+static int rdc321x_wdt_stop(void)
+{
+	if (rdc321x_wdt_device.running)
+		rdc321x_wdt_device.running = 0;
+
+	ticks = rdc321x_wdt_device.default_ticks;
+
+	return -EIO;
+}
+
+/* filesystem operations */
+static int rdc321x_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
+		return -EBUSY;
+
+	return nonseekable_open(inode, file);
+}
+
+static int rdc321x_wdt_release(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+	return 0;
+}
+
+static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file,
+				unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	unsigned int value;
+	static struct watchdog_info ident = {
+		.options = WDIOF_CARDRESET,
+		.identity = "RDC321x WDT",
+	};
+	unsigned long flags;
+
+	switch (cmd) {
+	case WDIOC_KEEPALIVE:
+		rdc321x_wdt_reset();
+		break;
+	case WDIOC_GETSTATUS:
+		/* Read the value from the DATA register */
+		spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+		value = inl(RDC3210_CFGREG_DATA);
+		spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+		if (copy_to_user(argp, &value, sizeof(int)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&value, argp, sizeof(int)))
+			return -EFAULT;
+		switch (value) {
+		case WDIOS_ENABLECARD:
+			rdc321x_wdt_start();
+			break;
+		case WDIOS_DISABLECARD:
+			return rdc321x_wdt_stop();
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	if (!count)
+		return -EIO;
+
+	rdc321x_wdt_reset();
+
+	return count;
+}
+
+static const struct file_operations rdc321x_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.ioctl		= rdc321x_wdt_ioctl,
+	.open		= rdc321x_wdt_open,
+	.write		= rdc321x_wdt_write,
+	.release	= rdc321x_wdt_release,
+};
+
+static struct miscdevice rdc321x_wdt_misc = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rdc321x_wdt_fops,
+};
+
+static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
+{
+	int err;
+
+	err = misc_register(&rdc321x_wdt_misc);
+	if (err < 0) {
+		printk(KERN_ERR PFX "watchdog misc_register failed\n");
+		return err;
+	}
+
+	spin_lock_init(&rdc321x_wdt_device.lock);
+
+	/* Reset the watchdog */
+	outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
+
+	init_completion(&rdc321x_wdt_device.stop);
+	rdc321x_wdt_device.queue = 0;
+
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+
+	setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
+
+	rdc321x_wdt_device.default_ticks = ticks;
+
+	printk(KERN_INFO PFX "watchdog init success\n");
+
+	return 0;
+}
+
+static int rdc321x_wdt_remove(struct platform_device *pdev)
+{
+	if (rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 0;
+		wait_for_completion(&rdc321x_wdt_device.stop);
+	}
+
+	misc_deregister(&rdc321x_wdt_misc);
+
+	return 0;
+}
+
+static struct platform_driver rdc321x_wdt_driver = {
+	.probe = rdc321x_wdt_probe,
+	.remove = rdc321x_wdt_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "rdc321x-wdt",
+	},
+};
+
+static int __init rdc321x_wdt_init(void)
+{
+	return platform_driver_register(&rdc321x_wdt_driver);
+}
+
+static void __exit rdc321x_wdt_exit(void)
+{
+	platform_driver_unregister(&rdc321x_wdt_driver);
+}
+
+module_init(rdc321x_wdt_init);
+module_exit(rdc321x_wdt_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c
index 5c921e47156..f1ae3729a19 100644
--- a/drivers/watchdog/rm9k_wdt.c
+++ b/drivers/watchdog/rm9k_wdt.c
@@ -29,10 +29,10 @@
 #include <linux/notifier.h>
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <asm/atomic.h>
 #include <asm/processor.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 #include <asm/rm9k-ocd.h>
 
@@ -53,10 +53,12 @@ static void wdt_gpi_stop(void);
 static void wdt_gpi_set_timeout(unsigned int);
 static int wdt_gpi_open(struct inode *, struct file *);
 static int wdt_gpi_release(struct inode *, struct file *);
-static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, loff_t *);
+static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t,
+								loff_t *);
 static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long);
 static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *);
-static const struct resource *wdt_gpi_get_resource(struct platform_device *, const char *, unsigned int);
+static const struct resource *wdt_gpi_get_resource(struct platform_device *,
+						const char *, unsigned int);
 static int __init wdt_gpi_probe(struct device *);
 static int __exit wdt_gpi_remove(struct device *);
 
@@ -68,7 +70,7 @@ static int locked;
 
 
 /* These are set from device resources */
-static void __iomem * wd_regs;
+static void __iomem *wd_regs;
 static unsigned int wd_irq, wd_ctr;
 
 
@@ -216,7 +218,8 @@ static int wdt_gpi_release(struct inode *inode, struct file *file)
 		if (expect_close) {
 			wdt_gpi_stop();
 			free_irq(wd_irq, &miscdev);
-			printk(KERN_INFO "%s: watchdog stopped\n", wdt_gpi_name);
+			printk(KERN_INFO "%s: watchdog stopped\n",
+							wdt_gpi_name);
 		} else {
 			printk(KERN_CRIT "%s: unexpected close() -"
 				" watchdog left running\n",
@@ -231,8 +234,8 @@ static int wdt_gpi_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t
-wdt_gpi_write(struct file *f, const char __user *d, size_t s, loff_t *o)
+static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s,
+								loff_t *o)
 {
 	char val;
 
@@ -241,8 +244,7 @@ wdt_gpi_write(struct file *f, const char __user *d, size_t s, loff_t *o)
 	return s ? 1 : 0;
 }
 
-static long
-wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
+static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 {
 	long res = -ENOTTY;
 	const long size = _IOC_SIZE(cmd);
@@ -271,7 +273,8 @@ wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 	case WDIOC_GETSUPPORT:
 		wdinfo.options = nowayout ?
 			WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING :
-			WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE;
+			WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+			WDIOF_MAGICCLOSE;
 		res = __copy_to_user(argp, &wdinfo, size) ?  -EFAULT : size;
 		break;
 
@@ -322,8 +325,8 @@ wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 
 
 /* Shutdown notifier */
-static int
-wdt_gpi_notify(struct notifier_block *this, unsigned long code, void *unused)
+static int wdt_gpi_notify(struct notifier_block *this, unsigned long code,
+			  void *unused)
 {
 	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_gpi_stop();
@@ -333,9 +336,8 @@ wdt_gpi_notify(struct notifier_block *this, unsigned long code, void *unused)
 
 
 /* Init & exit procedures */
-static const struct resource *
-wdt_gpi_get_resource(struct platform_device *pdv, const char *name,
-		      unsigned int type)
+static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv,
+					const char *name, unsigned int type)
 {
 	char buf[80];
 	if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 98532c0e068..86d42801de4 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -21,18 +21,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Changelog:
- *	05-Oct-2004	BJD	Added semaphore init to stop crashes on open
- *				Fixed tmr_count / wdt_count confusion
- *				Added configurable debug
- *
- *	11-Jan-2005	BJD	Fixed divide-by-2 in timeout code
- *
- *	25-Jan-2005	DA	Added suspend/resume support
- *				Replaced reboot notifier with .shutdown method
- *
- *	10-Mar-2005	LCVR	Changed S3C2410_VA to S3C24XX_VA
 */
 
 #include <linux/module.h>
@@ -46,11 +34,10 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#include <asm/arch/map.h>
+#include <mach/map.h>
 
 #undef S3C_VA_WATCHDOG
 #define S3C_VA_WATCHDOG (0)
@@ -65,8 +52,8 @@
 static int nowayout	= WATCHDOG_NOWAYOUT;
 static int tmr_margin	= CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME;
 static int tmr_atboot	= CONFIG_S3C2410_WATCHDOG_ATBOOT;
-static int soft_noboot	= 0;
-static int debug	= 0;
+static int soft_noboot;
+static int debug;
 
 module_param(tmr_margin,  int, 0);
 module_param(tmr_atboot,  int, 0);
@@ -74,24 +61,23 @@ module_param(nowayout,    int, 0);
 module_param(soft_noboot, int, 0);
 module_param(debug,	  int, 0);
 
-MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
-
-MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
-
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
+MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default="
+		__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(tmr_atboot,
+		"Watchdog is started at boot time if set to 1, default="
+			__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)");
-
 MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)");
 
 
 typedef enum close_state {
 	CLOSE_STATE_NOT,
-	CLOSE_STATE_ALLOW=0x4021
+	CLOSE_STATE_ALLOW = 0x4021
 } close_state_t;
 
-static DECLARE_MUTEX(open_lock);
-
+static unsigned long open_lock;
 static struct device    *wdt_dev;	/* platform device attached to */
 static struct resource	*wdt_mem;
 static struct resource	*wdt_irq;
@@ -99,38 +85,47 @@ static struct clk	*wdt_clock;
 static void __iomem	*wdt_base;
 static unsigned int	 wdt_count;
 static close_state_t	 allow_close;
+static DEFINE_SPINLOCK(wdt_lock);
 
 /* watchdog control routines */
 
 #define DBG(msg...) do { \
 	if (debug) \
 		printk(KERN_INFO msg); \
-	} while(0)
+	} while (0)
 
 /* functions */
 
-static int s3c2410wdt_keepalive(void)
+static void s3c2410wdt_keepalive(void)
 {
+	spin_lock(&wdt_lock);
 	writel(wdt_count, wdt_base + S3C2410_WTCNT);
-	return 0;
+	spin_unlock(&wdt_lock);
 }
 
-static int s3c2410wdt_stop(void)
+static void __s3c2410wdt_stop(void)
 {
 	unsigned long wtcon;
 
 	wtcon = readl(wdt_base + S3C2410_WTCON);
 	wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
 	writel(wtcon, wdt_base + S3C2410_WTCON);
+}
 
-	return 0;
+static void s3c2410wdt_stop(void)
+{
+	spin_lock(&wdt_lock);
+	__s3c2410wdt_stop();
+	spin_unlock(&wdt_lock);
 }
 
-static int s3c2410wdt_start(void)
+static void s3c2410wdt_start(void)
 {
 	unsigned long wtcon;
 
-	s3c2410wdt_stop();
+	spin_lock(&wdt_lock);
+
+	__s3c2410wdt_stop();
 
 	wtcon = readl(wdt_base + S3C2410_WTCON);
 	wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;
@@ -149,8 +144,7 @@ static int s3c2410wdt_start(void)
 	writel(wdt_count, wdt_base + S3C2410_WTDAT);
 	writel(wdt_count, wdt_base + S3C2410_WTCNT);
 	writel(wtcon, wdt_base + S3C2410_WTCON);
-
-	return 0;
+	spin_unlock(&wdt_lock);
 }
 
 static int s3c2410wdt_set_heartbeat(int timeout)
@@ -211,7 +205,7 @@ static int s3c2410wdt_set_heartbeat(int timeout)
 
 static int s3c2410wdt_open(struct inode *inode, struct file *file)
 {
-	if(down_trylock(&open_lock))
+	if (test_and_set_bit(0, &open_lock))
 		return -EBUSY;
 
 	if (nowayout)
@@ -231,15 +225,14 @@ static int s3c2410wdt_release(struct inode *inode, struct file *file)
 	 * 	Lock it in if it's a module and we set nowayout
 	 */
 
-	if (allow_close == CLOSE_STATE_ALLOW) {
+	if (allow_close == CLOSE_STATE_ALLOW)
 		s3c2410wdt_stop();
-	} else {
+	else {
 		dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n");
 		s3c2410wdt_keepalive();
 	}
-
 	allow_close = CLOSE_STATE_NOT;
-	up(&open_lock);
+	clear_bit(0, &open_lock);
 	return 0;
 }
 
@@ -249,7 +242,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 	/*
 	 *	Refresh the timer.
 	 */
-	if(len) {
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 
@@ -265,7 +258,6 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 					allow_close = CLOSE_STATE_ALLOW;
 			}
 		}
-
 		s3c2410wdt_keepalive();
 	}
 	return len;
@@ -273,48 +265,41 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 
 #define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
 
-static struct watchdog_info s3c2410_wdt_ident = {
+static const struct watchdog_info s3c2410_wdt_ident = {
 	.options          =     OPTIONS,
 	.firmware_version =	0,
 	.identity         =	"S3C2410 Watchdog",
 };
 
 
-static int s3c2410wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long s3c2410wdt_ioctl(struct file *file,	unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_margin;
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &s3c2410_wdt_ident,
-				sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_KEEPALIVE:
-			s3c2410wdt_keepalive();
-			return 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_margin, p))
-				return -EFAULT;
-
-			if (s3c2410wdt_set_heartbeat(new_margin))
-				return -EINVAL;
-
-			s3c2410wdt_keepalive();
-			return put_user(tmr_margin, p);
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(tmr_margin, p);
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &s3c2410_wdt_ident,
+			sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		s3c2410wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+		if (s3c2410wdt_set_heartbeat(new_margin))
+			return -EINVAL;
+		s3c2410wdt_keepalive();
+		return put_user(tmr_margin, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(tmr_margin, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -324,7 +309,7 @@ static const struct file_operations s3c2410wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= s3c2410wdt_write,
-	.ioctl		= s3c2410wdt_ioctl,
+	.unlocked_ioctl	= s3c2410wdt_ioctl,
 	.open		= s3c2410wdt_open,
 	.release	= s3c2410wdt_release,
 };
@@ -368,7 +353,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	size = (res->end-res->start)+1;
+	size = (res->end - res->start) + 1;
 	wdt_mem = request_mem_region(res->start, size, pdev->name);
 	if (wdt_mem == NULL) {
 		dev_err(dev, "failed to get memory region\n");
@@ -377,7 +362,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	}
 
 	wdt_base = ioremap(res->start, size);
-	if (wdt_base == 0) {
+	if (wdt_base == NULL) {
 		dev_err(dev, "failed to ioremap() region\n");
 		ret = -EINVAL;
 		goto err_req;
@@ -411,14 +396,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	 * not, try the default value */
 
 	if (s3c2410wdt_set_heartbeat(tmr_margin)) {
-		started = s3c2410wdt_set_heartbeat(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
+		started = s3c2410wdt_set_heartbeat(
+					CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
 
-		if (started == 0) {
-			dev_info(dev,"tmr_margin value out of range, default %d used\n",
+		if (started == 0)
+			dev_info(dev,
+			   "tmr_margin value out of range, default %d used\n",
 			       CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
-		} else {
+		else
 			dev_info(dev, "default timer value is out of range, cannot start\n");
-		}
 	}
 
 	ret = misc_register(&s3c2410wdt_miscdev);
@@ -447,7 +433,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 		 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
 		 (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis",
 		 (wtcon & S3C2410_WTCON_INTEN) ? "" : "en");
-	
+
 	return 0;
 
  err_clk:
@@ -487,7 +473,7 @@ static int s3c2410wdt_remove(struct platform_device *dev)
 
 static void s3c2410wdt_shutdown(struct platform_device *dev)
 {
-	s3c2410wdt_stop();	
+	s3c2410wdt_stop();
 }
 
 #ifdef CONFIG_PM
@@ -540,7 +526,8 @@ static struct platform_driver s3c2410wdt_driver = {
 };
 
 
-static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
+static char banner[] __initdata =
+	KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
 
 static int __init watchdog_init(void)
 {
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index 34a2b3b8180..31a48437dc3 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -26,13 +26,14 @@
 #include <linux/watchdog.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
+#include <linux/uaccess.h>
 
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #endif
 
-#include <asm/hardware.h>
-#include <asm/uaccess.h>
+#include <mach/reset.h>
+#include <mach/hardware.h>
 
 #define OSCR_FREQ		CLOCK_TICK_RATE
 
@@ -45,7 +46,7 @@ static int boot_status;
  */
 static int sa1100dog_open(struct inode *inode, struct file *file)
 {
-	if (test_and_set_bit(1,&sa1100wdt_users))
+	if (test_and_set_bit(1, &sa1100wdt_users))
 		return -EBUSY;
 
 	/* Activate SA1100 Watchdog timer */
@@ -66,28 +67,27 @@ static int sa1100dog_open(struct inode *inode, struct file *file)
 static int sa1100dog_release(struct inode *inode, struct file *file)
 {
 	printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n");
-
 	clear_bit(1, &sa1100wdt_users);
-
 	return 0;
 }
 
-static ssize_t sa1100dog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+static ssize_t sa1100dog_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
 {
 	if (len)
 		/* Refresh OSMR3 timer. */
 		OSMR3 = OSCR + pre_margin;
-
 	return len;
 }
 
-static struct watchdog_info ident = {
-	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+static const struct watchdog_info ident = {
+	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT
+				| WDIOF_KEEPALIVEPING,
 	.identity	= "SA1100/PXA255 Watchdog",
 };
 
-static int sa1100dog_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
@@ -108,6 +108,11 @@ static int sa1100dog_ioctl(struct inode *inode, struct file *file,
 		ret = put_user(boot_status, p);
 		break;
 
+	case WDIOC_KEEPALIVE:
+		OSMR3 = OSCR + pre_margin;
+		ret = 0;
+		break;
+
 	case WDIOC_SETTIMEOUT:
 		ret = get_user(time, p);
 		if (ret)
@@ -125,27 +130,20 @@ static int sa1100dog_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETTIMEOUT:
 		ret = put_user(pre_margin / OSCR_FREQ, p);
 		break;
-
-	case WDIOC_KEEPALIVE:
-		OSMR3 = OSCR + pre_margin;
-		ret = 0;
-		break;
 	}
 	return ret;
 }
 
-static const struct file_operations sa1100dog_fops =
-{
+static const struct file_operations sa1100dog_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= sa1100dog_write,
-	.ioctl		= sa1100dog_ioctl,
+	.unlocked_ioctl	= sa1100dog_ioctl,
 	.open		= sa1100dog_open,
 	.release	= sa1100dog_release,
 };
 
-static struct miscdevice sa1100dog_miscdev =
-{
+static struct miscdevice sa1100dog_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &sa1100dog_fops,
@@ -162,13 +160,15 @@ static int __init sa1100dog_init(void)
 	 * we suspend, RCSR will be cleared, and the watchdog
 	 * reset reason will be lost.
 	 */
-	boot_status = (RCSR & RCSR_WDR) ? WDIOF_CARDRESET : 0;
+	boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
+				WDIOF_CARDRESET : 0;
 	pre_margin = OSCR_FREQ * margin;
 
 	ret = misc_register(&sa1100dog_miscdev);
 	if (ret == 0)
-		printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
-		       margin);
+		printk(KERN_INFO
+			"SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
+						margin);
 	return ret;
 }
 
diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c
index b9443143369..27e526a07c9 100644
--- a/drivers/watchdog/sb_wdog.c
+++ b/drivers/watchdog/sb_wdog.c
@@ -57,6 +57,7 @@
 #include <asm/sibyte/sb1250_int.h>
 #include <asm/sibyte/sb1250_scd.h>
 
+static DEFINE_SPINLOCK(sbwd_lock);
 
 /*
  * set the initial count value of a timer
@@ -65,8 +66,10 @@
  */
 void sbwdog_set(char __iomem *wdog, unsigned long t)
 {
+	spin_lock(&sbwd_lock);
 	__raw_writeb(0, wdog - 0x10);
 	__raw_writeq(t & 0x7fffffUL, wdog);
+	spin_unlock(&sbwd_lock);
 }
 
 /*
@@ -77,7 +80,9 @@ void sbwdog_set(char __iomem *wdog, unsigned long t)
  */
 void sbwdog_pet(char __iomem *wdog)
 {
+	spin_lock(&sbwd_lock);
 	__raw_writeb(__raw_readb(wdog) | 1, wdog);
+	spin_unlock(&sbwd_lock);
 }
 
 static unsigned long sbwdog_gate; /* keeps it to one thread only */
@@ -86,8 +91,9 @@ static char __iomem *user_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_1));
 static unsigned long timeout = 0x7fffffUL;	/* useconds: 8.3ish secs. */
 static int expect_close;
 
-static struct watchdog_info ident = {
-	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+static const struct watchdog_info ident = {
+	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT |
+						WDIOF_KEEPALIVEPING,
 	.identity	= "SiByte Watchdog",
 };
 
@@ -97,9 +103,8 @@ static struct watchdog_info ident = {
 static int sbwdog_open(struct inode *inode, struct file *file)
 {
 	nonseekable_open(inode, file);
-	if (test_and_set_bit(0, &sbwdog_gate)) {
+	if (test_and_set_bit(0, &sbwdog_gate))
 		return -EBUSY;
-	}
 	__module_get(THIS_MODULE);
 
 	/*
@@ -120,8 +125,9 @@ static int sbwdog_release(struct inode *inode, struct file *file)
 		__raw_writeb(0, user_dog);
 		module_put(THIS_MODULE);
 	} else {
-		printk(KERN_CRIT "%s: Unexpected close, not stopping watchdog!\n",
-			ident.identity);
+		printk(KERN_CRIT
+			"%s: Unexpected close, not stopping watchdog!\n",
+						ident.identity);
 		sbwdog_pet(user_dog);
 	}
 	clear_bit(0, &sbwdog_gate);
@@ -147,12 +153,10 @@ static ssize_t sbwdog_write(struct file *file, const char __user *data,
 		for (i = 0; i != len; i++) {
 			char c;
 
-			if (get_user(c, data + i)) {
+			if (get_user(c, data + i))
 				return -EFAULT;
-			}
-			if (c == 'V') {
+			if (c == 'V')
 				expect_close = 42;
-			}
 		}
 		sbwdog_pet(user_dog);
 	}
@@ -160,8 +164,8 @@ static ssize_t sbwdog_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int sbwdog_ioctl(struct inode *inode, struct file *file,
-			unsigned int cmd, unsigned long arg)
+static long sbwdog_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	int ret = -ENOTTY;
 	unsigned long time;
@@ -178,11 +182,15 @@ static int sbwdog_ioctl(struct inode *inode, struct file *file,
 		ret = put_user(0, p);
 		break;
 
+	case WDIOC_KEEPALIVE:
+		sbwdog_pet(user_dog);
+		ret = 0;
+		break;
+
 	case WDIOC_SETTIMEOUT:
 		ret = get_user(time, p);
-		if (ret) {
+		if (ret)
 			break;
-		}
 
 		time *= 1000000;
 		if (time > 0x7fffffUL) {
@@ -200,11 +208,6 @@ static int sbwdog_ioctl(struct inode *inode, struct file *file,
 		 */
 		ret = put_user(__raw_readq(user_dog - 8) / 1000000, p);
 		break;
-
-	case WDIOC_KEEPALIVE:
-		sbwdog_pet(user_dog);
-		ret = 0;
-		break;
 	}
 	return ret;
 }
@@ -212,8 +215,8 @@ static int sbwdog_ioctl(struct inode *inode, struct file *file,
 /*
  *	Notifier for system down
  */
-static int
-sbwdog_notify_sys(struct notifier_block *this, unsigned long code, void *erf)
+static int sbwdog_notify_sys(struct notifier_block *this, unsigned long code,
+								void *erf)
 {
 	if (code == SYS_DOWN || code == SYS_HALT) {
 		/*
@@ -226,18 +229,16 @@ sbwdog_notify_sys(struct notifier_block *this, unsigned long code, void *erf)
 	return NOTIFY_DONE;
 }
 
-static const struct file_operations sbwdog_fops =
-{
+static const struct file_operations sbwdog_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= sbwdog_write,
-	.ioctl		= sbwdog_ioctl,
+	.unlocked_ioctl	= sbwdog_ioctl,
 	.open		= sbwdog_open,
 	.release	= sbwdog_release,
 };
 
-static struct miscdevice sbwdog_miscdev =
-{
+static struct miscdevice sbwdog_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &sbwdog_fops,
@@ -267,13 +268,12 @@ irqreturn_t sbwdog_interrupt(int irq, void *addr)
 	/*
 	 * if it's the second watchdog timer, it's for those users
 	 */
-	if (wd_cfg_reg == user_dog) {
+	if (wd_cfg_reg == user_dog)
 		printk(KERN_CRIT
 			"%s in danger of initiating system reset in %ld.%01ld seconds\n",
 			ident.identity, wd_init / 1000000, (wd_init / 100000) % 10);
-	} else {
+	else
 		cfg |= 1;
-	}
 
 	__raw_writeb(cfg, wd_cfg_reg);
 
@@ -289,28 +289,31 @@ static int __init sbwdog_init(void)
 	 */
 	ret = register_reboot_notifier(&sbwdog_notifier);
 	if (ret) {
-		printk (KERN_ERR "%s: cannot register reboot notifier (err=%d)\n",
-			ident.identity, ret);
+		printk(KERN_ERR
+			"%s: cannot register reboot notifier (err=%d)\n",
+						ident.identity, ret);
 		return ret;
 	}
 
 	/*
 	 * get the resources
 	 */
-	ret = misc_register(&sbwdog_miscdev);
-	if (ret == 0) {
-		printk(KERN_INFO "%s: timeout is %ld.%ld secs\n", ident.identity,
-			timeout / 1000000, (timeout / 100000) % 10);
-	}
 
 	ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
 		ident.identity, (void *)user_dog);
 	if (ret) {
-		printk(KERN_ERR "%s: failed to request irq 1 - %d\n", ident.identity,
-			ret);
-		misc_deregister(&sbwdog_miscdev);
+		printk(KERN_ERR "%s: failed to request irq 1 - %d\n",
+						ident.identity, ret);
+		return ret;
 	}
 
+	ret = misc_register(&sbwdog_miscdev);
+	if (ret == 0) {
+		printk(KERN_INFO "%s: timeout is %ld.%ld secs\n",
+				ident.identity,
+				timeout / 1000000, (timeout / 100000) % 10);
+	} else
+		free_irq(1, (void *)user_dog);
 	return ret;
 }
 
@@ -327,7 +330,7 @@ MODULE_DESCRIPTION("SiByte Watchdog");
 
 module_param(timeout, ulong, 0);
 MODULE_PARM_DESC(timeout,
-	"Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)");
+      "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)");
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
@@ -336,16 +339,15 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
  * example code that can be put in a platform code area to utilize the
  * first watchdog timer for the kernels own purpose.
 
- void
-platform_wd_setup(void)
+void platform_wd_setup(void)
 {
 	int ret;
 
-	ret = request_irq(0, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
 		"Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0));
 	if (ret) {
-		printk(KERN_CRIT "Watchdog IRQ zero(0) failed to be requested - %d\n",
-			ret);
+		printk(KERN_CRIT
+		  "Watchdog IRQ zero(0) failed to be requested - %d\n", ret);
 	}
 }
 
diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c
index ef76f01625e..3266daaaecf 100644
--- a/drivers/watchdog/sbc60xxwdt.c
+++ b/drivers/watchdog/sbc60xxwdt.c
@@ -16,19 +16,23 @@
  *
  *           12/4 - 2000      [Initial revision]
  *           25/4 - 2000      Added /dev/watchdog support
- *           09/5 - 2001      [smj@oro.net] fixed fop_write to "return 1" on success
+ *           09/5 - 2001      [smj@oro.net] fixed fop_write to "return 1"
+ *					on success
  *           12/4 - 2002      [rob@osinvestor.com] eliminate fop_read
  *                            fix possible wdt_is_open race
  *                            add CONFIG_WATCHDOG_NOWAYOUT support
  *                            remove lock_kernel/unlock_kernel pairs
  *                            added KERN_* to printk's
  *                            got rid of extraneous comments
- *                            changed watchdog_info to correctly reflect what the driver offers
- *                            added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, WDIOC_SETTIMEOUT,
- *                            WDIOC_GETTIMEOUT, and WDIOC_SETOPTIONS ioctls
+ *                            changed watchdog_info to correctly reflect what
+ *			      the driver offers
+ *			      added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS,
+ *			      WDIOC_SETTIMEOUT, WDIOC_GETTIMEOUT, and
+ *			      WDIOC_SETOPTIONS ioctls
  *           09/8 - 2003      [wim@iguana.be] cleanup of trailing spaces
  *                            use module_param
- *                            made timeout (the emulated heartbeat) a module_param
+ *                            made timeout (the emulated heartbeat) a
+ *			      module_param
  *                            made the keepalive ping an internal subroutine
  *                            made wdt_stop and wdt_start module params
  *                            added extra printk's for startup problems
@@ -56,9 +60,9 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define OUR_NAME "sbc60xxwdt"
@@ -94,13 +98,18 @@ MODULE_PARM_DESC(wdt_start, "SBC60xx WDT 'start' io port (default 0x443)");
  */
 
 #define WATCHDOG_TIMEOUT 30		/* 30 sec default timeout */
-static int timeout = WATCHDOG_TIMEOUT;	/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;	/* in seconds, multiplied by HZ to
+					   get seconds to wait for a ping */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static void wdt_timer_ping(unsigned long);
 static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0);
@@ -117,15 +126,14 @@ static void wdt_timer_ping(unsigned long data)
 	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
 	 * we agree to ping the WDT
 	 */
-	if(time_before(jiffies, next_heartbeat))
-	{
+	if (time_before(jiffies, next_heartbeat)) {
 		/* Ping the WDT by reading from wdt_start */
 		inb_p(wdt_start);
 		/* Re-set the timer interval */
 		mod_timer(&timer, jiffies + WDT_INTERVAL);
-	} else {
-		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
-	}
+	} else
+		printk(KERN_WARNING PFX
+			"Heartbeat lost! Will not ping the watchdog\n");
 }
 
 /*
@@ -159,40 +167,40 @@ static void wdt_keepalive(void)
  * /dev/watchdog handling
  */
 
-static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos)
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count)
-	{
-		if (!nowayout)
-		{
+	if (count) {
+		if (!nowayout) {
 			size_t ofs;
 
-			/* note: just in case someone wrote the magic character
-			 * five months ago... */
+			/* note: just in case someone wrote the
+			   magic character five months ago... */
 			wdt_expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
-			for(ofs = 0; ofs != count; ofs++)
-			{
+			/* scan to see whether or not we got the
+			   magic character */
+			for (ofs = 0; ofs != count; ofs++) {
 				char c;
-				if(get_user(c, buf+ofs))
+				if (get_user(c, buf + ofs))
 					return -EFAULT;
-				if(c == 'V')
+				if (c == 'V')
 					wdt_expect_close = 42;
 			}
 		}
 
-		/* Well, anyhow someone wrote to us, we should return that favour */
+		/* Well, anyhow someone wrote to us, we should
+		   return that favour */
 		wdt_keepalive();
 	}
 	return count;
 }
 
-static int fop_open(struct inode * inode, struct file * file)
+static int fop_open(struct inode *inode, struct file *file)
 {
 	/* Just in case we're already talking to someone... */
-	if(test_and_set_bit(0, &wdt_is_open))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 
 	if (nowayout)
@@ -203,78 +211,72 @@ static int fop_open(struct inode * inode, struct file * file)
 	return nonseekable_open(inode, file);
 }
 
-static int fop_close(struct inode * inode, struct file * file)
+static int fop_close(struct inode *inode, struct file *file)
 {
-	if(wdt_expect_close == 42)
+	if (wdt_expect_close == 42)
 		wdt_turnoff();
 	else {
 		del_timer(&timer);
-		printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n");
+		printk(KERN_CRIT PFX
+		  "device file closed unexpectedly. Will not stop the WDT!\n");
 	}
 	clear_bit(0, &wdt_is_open);
 	wdt_expect_close = 0;
 	return 0;
 }
 
-static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident=
-	{
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "SBC60xx",
 	};
 
-	switch(cmd)
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
 	{
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdt_keepalive();
-			return 0;
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if(get_user(new_options, p))
-				return -EFAULT;
-
-			if(new_options & WDIOS_DISABLECARD) {
-				wdt_turnoff();
-				retval = 0;
-			}
-
-			if(new_options & WDIOS_ENABLECARD) {
-				wdt_startup();
-				retval = 0;
-			}
-
-			return retval;
+		int new_options, retval = -EINVAL;
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
 		}
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_timeout;
-
-			if(get_user(new_timeout, p))
-				return -EFAULT;
-
-			if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */
-				return -EINVAL;
-
-			timeout = new_timeout;
-			wdt_keepalive();
-			/* Fall through */
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
 		}
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		/* arbitrary upper limit */
+		if (new_timeout < 1 || new_timeout > 3600)
+			return -EINVAL;
+
+		timeout = new_timeout;
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -284,7 +286,7 @@ static const struct file_operations wdt_fops = {
 	.write		= fop_write,
 	.open		= fop_open,
 	.release	= fop_close,
-	.ioctl		= fop_ioctl,
+	.unlocked_ioctl	= fop_ioctl,
 };
 
 static struct miscdevice wdt_miscdev = {
@@ -300,7 +302,7 @@ static struct miscdevice wdt_miscdev = {
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_turnoff();
 	return NOTIFY_DONE;
 }
@@ -310,8 +312,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
  *	turn the timebomb registers off.
  */
 
-static struct notifier_block wdt_notifier=
-{
+static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
@@ -324,23 +325,22 @@ static void __exit sbc60xxwdt_unload(void)
 
 	unregister_reboot_notifier(&wdt_notifier);
 	if ((wdt_stop != 0x45) && (wdt_stop != wdt_start))
-		release_region(wdt_stop,1);
-	release_region(wdt_start,1);
+		release_region(wdt_stop, 1);
+	release_region(wdt_start, 1);
 }
 
 static int __init sbc60xxwdt_init(void)
 {
 	int rc = -EBUSY;
 
-	if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
-	{
+	if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */
 		timeout = WATCHDOG_TIMEOUT;
-		printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n",
-			timeout);
- 	}
+		printk(KERN_INFO PFX
+			"timeout value must be 1 <= x <= 3600, using %d\n",
+								timeout);
+	}
 
-	if (!request_region(wdt_start, 1, "SBC 60XX WDT"))
-	{
+	if (!request_region(wdt_start, 1, "SBC 60XX WDT")) {
 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			wdt_start);
 		rc = -EIO;
@@ -348,33 +348,30 @@ static int __init sbc60xxwdt_init(void)
 	}
 
 	/* We cannot reserve 0x45 - the kernel already has! */
-	if ((wdt_stop != 0x45) && (wdt_stop != wdt_start))
-	{
-		if (!request_region(wdt_stop, 1, "SBC 60XX WDT"))
-		{
-			printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
-				wdt_stop);
+	if (wdt_stop != 0x45 && wdt_stop != wdt_start) {
+		if (!request_region(wdt_stop, 1, "SBC 60XX WDT")) {
+			printk(KERN_ERR PFX
+				"I/O address 0x%04x already in use\n",
+							wdt_stop);
 			rc = -EIO;
 			goto err_out_region1;
 		}
 	}
 
 	rc = register_reboot_notifier(&wdt_notifier);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out_region2;
 	}
 
 	rc = misc_register(&wdt_miscdev);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			wdt_miscdev.minor, rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						wdt_miscdev.minor, rc);
 		goto err_out_reboot;
 	}
-
 	printk(KERN_INFO PFX "WDT driver for 60XX single board computer initialised. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
 
@@ -383,10 +380,10 @@ static int __init sbc60xxwdt_init(void)
 err_out_reboot:
 	unregister_reboot_notifier(&wdt_notifier);
 err_out_region2:
-	if ((wdt_stop != 0x45) && (wdt_stop != wdt_start))
-		release_region(wdt_stop,1);
+	if (wdt_stop != 0x45 && wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
 err_out_region1:
-	release_region(wdt_start,1);
+	release_region(wdt_start, 1);
 err_out:
 	return rc;
 }
diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c
index 4c8cefbd862..67ddeb1c830 100644
--- a/drivers/watchdog/sbc7240_wdt.c
+++ b/drivers/watchdog/sbc7240_wdt.c
@@ -27,10 +27,10 @@
 #include <linux/reboot.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <asm/atomic.h>
-#include <asm/io.h>
 #include <asm/system.h>
-#include <asm/uaccess.h>
 
 #define SBC7240_PREFIX "sbc7240_wdt: "
 
@@ -159,7 +159,7 @@ static int fop_close(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_KEEPALIVEPING|
 		   WDIOF_SETTIMEOUT|
 		   WDIOF_MAGICCLOSE,
@@ -168,50 +168,50 @@ static struct watchdog_info ident = {
 };
 
 
-static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		return copy_to_user
-			((void __user *)arg, &ident, sizeof(ident))
-			 ? -EFAULT : 0;
+		return copy_to_user((void __user *)arg, &ident, sizeof(ident))
+						 ? -EFAULT : 0;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, (int __user *)arg);
-	case WDIOC_KEEPALIVE:
-		wdt_keepalive();
-		return 0;
-	case WDIOC_SETOPTIONS:{
-			int options;
-			int retval = -EINVAL;
+	case WDIOC_SETOPTIONS:
+	{
+		int options;
+		int retval = -EINVAL;
 
-			if (get_user(options, (int __user *)arg))
-				return -EFAULT;
+		if (get_user(options, (int __user *)arg))
+			return -EFAULT;
 
-			if (options & WDIOS_DISABLECARD) {
-				wdt_disable();
-				retval = 0;
-			}
-
-			if (options & WDIOS_ENABLECARD) {
-				wdt_enable();
-				retval = 0;
-			}
+		if (options & WDIOS_DISABLECARD) {
+			wdt_disable();
+			retval = 0;
+		}
 
-			return retval;
+		if (options & WDIOS_ENABLECARD) {
+			wdt_enable();
+			retval = 0;
 		}
-	case WDIOC_SETTIMEOUT:{
-			int new_timeout;
 
-			if (get_user(new_timeout, (int __user *)arg))
-				return -EFAULT;
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
 
-			if (wdt_set_timeout(new_timeout))
-				return -EINVAL;
+		if (get_user(new_timeout, (int __user *)arg))
+			return -EFAULT;
 
-			/* Fall through */
-		}
+		if (wdt_set_timeout(new_timeout))
+			return -EINVAL;
+
+		/* Fall through */
+	}
 	case WDIOC_GETTIMEOUT:
 		return put_user(timeout, (int __user *)arg);
 	default:
@@ -225,7 +225,7 @@ static const struct file_operations wdt_fops = {
 	.write = fop_write,
 	.open = fop_open,
 	.release = fop_close,
-	.ioctl = fop_ioctl,
+	.unlocked_ioctl = fop_ioctl,
 };
 
 static struct miscdevice wdt_miscdev = {
diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c
index 2ee2677f364..fd83dd052d8 100644
--- a/drivers/watchdog/sbc8360.c
+++ b/drivers/watchdog/sbc8360.c
@@ -48,13 +48,12 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/moduleparam.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 static unsigned long sbc8360_is_open;
-static DEFINE_SPINLOCK(sbc8360_lock);
 static char expect_close;
 
 #define PFX "sbc8360: "
@@ -204,7 +203,8 @@ module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))");
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout,
-		 "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+		 "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Kernel methods.
@@ -231,9 +231,16 @@ static void sbc8360_ping(void)
 	outb(wd_margin, SBC8360_BASETIME);
 }
 
+/* stop watchdog */
+static void sbc8360_stop(void)
+{
+	/* De-activate the watchdog */
+	outb(0, SBC8360_ENABLE);
+}
+
 /* Userspace pings kernel driver, or requests clean close */
-static ssize_t sbc8360_write(struct file *file, const char __user * buf,
-			     size_t count, loff_t * ppos)
+static ssize_t sbc8360_write(struct file *file, const char __user *buf,
+			     size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -257,16 +264,12 @@ static ssize_t sbc8360_write(struct file *file, const char __user * buf,
 
 static int sbc8360_open(struct inode *inode, struct file *file)
 {
-	spin_lock(&sbc8360_lock);
-	if (test_and_set_bit(0, &sbc8360_is_open)) {
-		spin_unlock(&sbc8360_lock);
+	if (test_and_set_bit(0, &sbc8360_is_open))
 		return -EBUSY;
-	}
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
 	/* Activate and ping once to start the countdown */
-	spin_unlock(&sbc8360_lock);
 	sbc8360_activate();
 	sbc8360_ping();
 	return nonseekable_open(inode, file);
@@ -274,16 +277,14 @@ static int sbc8360_open(struct inode *inode, struct file *file)
 
 static int sbc8360_close(struct inode *inode, struct file *file)
 {
-	spin_lock(&sbc8360_lock);
 	if (expect_close == 42)
-		outb(0, SBC8360_ENABLE);
+		sbc8360_stop();
 	else
 		printk(KERN_CRIT PFX
-		       "SBC8360 device closed unexpectedly.  SBC8360 will not stop!\n");
+			"SBC8360 device closed unexpectedly.  SBC8360 will not stop!\n");
 
 	clear_bit(0, &sbc8360_is_open);
 	expect_close = 0;
-	spin_unlock(&sbc8360_lock);
 	return 0;
 }
 
@@ -294,10 +295,9 @@ static int sbc8360_close(struct inode *inode, struct file *file)
 static int sbc8360_notify_sys(struct notifier_block *this, unsigned long code,
 			      void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT) {
-		/* Disable the SBC8360 Watchdog */
-		outb(0, SBC8360_ENABLE);
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		sbc8360_stop();	/* Disable the SBC8360 Watchdog */
+
 	return NOTIFY_DONE;
 }
 
@@ -382,13 +382,13 @@ static int __init sbc8360_init(void)
 
 	return 0;
 
-      out_nomisc:
+out_nomisc:
 	unregister_reboot_notifier(&sbc8360_notifier);
-      out_noreboot:
+out_noreboot:
 	release_region(SBC8360_BASETIME, 1);
-      out_nobasetimereg:
+out_nobasetimereg:
 	release_region(SBC8360_ENABLE, 1);
-      out:
+out:
 	return res;
 }
 
diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c
index 82cbd8809a6..e5e470ca775 100644
--- a/drivers/watchdog/sbc_epx_c3.c
+++ b/drivers/watchdog/sbc_epx_c3.c
@@ -25,8 +25,8 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #define PFX "epx_c3: "
 static int epx_c3_alive;
@@ -100,12 +100,12 @@ static ssize_t epx_c3_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int epx_c3_ioctl(struct inode *inode, struct file *file,
-			unsigned int cmd, unsigned long arg)
+static long epx_c3_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	int options, retval = -EINVAL;
 	int __user *argp = (void __user *)arg;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_KEEPALIVEPING |
 					  WDIOF_MAGICCLOSE,
 		.firmware_version	= 0,
@@ -120,11 +120,6 @@ static int epx_c3_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, argp);
-	case WDIOC_KEEPALIVE:
-		epx_c3_pet();
-		return 0;
-	case WDIOC_GETTIMEOUT:
-		return put_user(WATCHDOG_TIMEOUT, argp);
 	case WDIOC_SETOPTIONS:
 		if (get_user(options, argp))
 			return -EFAULT;
@@ -140,6 +135,11 @@ static int epx_c3_ioctl(struct inode *inode, struct file *file,
 		}
 
 		return retval;
+	case WDIOC_KEEPALIVE:
+		epx_c3_pet();
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(WATCHDOG_TIMEOUT, argp);
 	default:
 		return -ENOTTY;
 	}
@@ -158,7 +158,7 @@ static const struct file_operations epx_c3_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= epx_c3_write,
-	.ioctl		= epx_c3_ioctl,
+	.unlocked_ioctl	= epx_c3_ioctl,
 	.open		= epx_c3_open,
 	.release	= epx_c3_release,
 };
diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c
index 35cddff7020..23da3ccd832 100644
--- a/drivers/watchdog/sc1200wdt.c
+++ b/drivers/watchdog/sc1200wdt.c
@@ -15,14 +15,18 @@
  *
  *	Changelog:
  *	20020220 Zwane Mwaikambo	Code based on datasheet, no hardware.
- *	20020221 Zwane Mwaikambo	Cleanups as suggested by Jeff Garzik and Alan Cox.
+ *	20020221 Zwane Mwaikambo	Cleanups as suggested by Jeff Garzik
+ *					and Alan Cox.
  *	20020222 Zwane Mwaikambo	Added probing.
  *	20020225 Zwane Mwaikambo	Added ISAPNP support.
  *	20020412 Rob Radez		Broke out start/stop functions
- *		 <rob@osinvestor.com>	Return proper status instead of temperature warning
- *					Add WDIOC_GETBOOTSTATUS and WDIOC_SETOPTIONS ioctls
+ *		 <rob@osinvestor.com>	Return proper status instead of
+ *					temperature warning
+ *					Add WDIOC_GETBOOTSTATUS and
+ *					WDIOC_SETOPTIONS ioctls
  *					Fix CONFIG_WATCHDOG_NOWAYOUT
- *	20020530 Joel Becker		Add Matt Domsch's nowayout module option
+ *	20020530 Joel Becker		Add Matt Domsch's nowayout module
+ *					option
  *	20030116 Adam Belay		Updated to the latest pnp code
  *
  */
@@ -39,9 +43,8 @@
 #include <linux/pnp.h>
 #include <linux/fs.h>
 #include <linux/semaphore.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 #define SC1200_MODULE_VER	"build 20020303"
 #define SC1200_MODULE_NAME	"sc1200wdt"
@@ -72,7 +75,7 @@ static char banner[] __initdata = KERN_INFO PFX SC1200_MODULE_VER;
 static int timeout = 1;
 static int io = -1;
 static int io_len = 2;		/* for non plug and play */
-static struct semaphore open_sem;
+static unsigned long open_flag;
 static char expect_close;
 static DEFINE_SPINLOCK(sc1200wdt_lock);	/* io port access serialisation */
 
@@ -81,7 +84,8 @@ static int isapnp = 1;
 static struct pnp_dev *wdt_dev;
 
 module_param(isapnp, int, 0);
-MODULE_PARM_DESC(isapnp, "When set to 0 driver ISA PnP support will be disabled");
+MODULE_PARM_DESC(isapnp,
+	"When set to 0 driver ISA PnP support will be disabled");
 #endif
 
 module_param(io, int, 0);
@@ -91,26 +95,40 @@ MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 
 
 /* Read from Data Register */
-static inline void sc1200wdt_read_data(unsigned char index, unsigned char *data)
+static inline void __sc1200wdt_read_data(unsigned char index,
+						unsigned char *data)
 {
-	spin_lock(&sc1200wdt_lock);
 	outb_p(index, PMIR);
 	*data = inb(PMDR);
-	spin_unlock(&sc1200wdt_lock);
 }
 
+static void sc1200wdt_read_data(unsigned char index, unsigned char *data)
+{
+	spin_lock(&sc1200wdt_lock);
+	__sc1200wdt_read_data(index, data);
+	spin_unlock(&sc1200wdt_lock);
+}
 
 /* Write to Data Register */
-static inline void sc1200wdt_write_data(unsigned char index, unsigned char data)
+static inline void __sc1200wdt_write_data(unsigned char index,
+						unsigned char data)
 {
-	spin_lock(&sc1200wdt_lock);
 	outb_p(index, PMIR);
 	outb(data, PMDR);
+}
+
+static inline void sc1200wdt_write_data(unsigned char index,
+						unsigned char data)
+{
+	spin_lock(&sc1200wdt_lock);
+	__sc1200wdt_write_data(index, data);
 	spin_unlock(&sc1200wdt_lock);
 }
 
@@ -118,22 +136,23 @@ static inline void sc1200wdt_write_data(unsigned char index, unsigned char data)
 static void sc1200wdt_start(void)
 {
 	unsigned char reg;
+	spin_lock(&sc1200wdt_lock);
 
-	sc1200wdt_read_data(WDCF, &reg);
+	__sc1200wdt_read_data(WDCF, &reg);
 	/* assert WDO when any of the following interrupts are triggered too */
 	reg |= (KBC_IRQ | MSE_IRQ | UART1_IRQ | UART2_IRQ);
-	sc1200wdt_write_data(WDCF, reg);
+	__sc1200wdt_write_data(WDCF, reg);
 	/* set the timeout and get the ball rolling */
-	sc1200wdt_write_data(WDTO, timeout);
-}
+	__sc1200wdt_write_data(WDTO, timeout);
 
+	spin_unlock(&sc1200wdt_lock);
+}
 
 static void sc1200wdt_stop(void)
 {
 	sc1200wdt_write_data(WDTO, 0);
 }
 
-
 /* This returns the status of the WDO signal, inactive high. */
 static inline int sc1200wdt_status(void)
 {
@@ -144,14 +163,13 @@ static inline int sc1200wdt_status(void)
 	 * KEEPALIVEPING which is a bit of a kludge because there's nothing
 	 * else for enabled/disabled status
 	 */
-	return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING;	/* bits 1 - 7 are undefined */
+	return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING;
 }
 
-
 static int sc1200wdt_open(struct inode *inode, struct file *file)
 {
 	/* allow one at a time */
-	if (down_trylock(&open_sem))
+	if (test_and_set_bit(0, &open_flag))
 		return -EBUSY;
 
 	if (timeout > MAX_TIMEOUT)
@@ -164,71 +182,70 @@ static int sc1200wdt_open(struct inode *inode, struct file *file)
 }
 
 
-static int sc1200wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long sc1200wdt_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
 {
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
 		.firmware_version = 0,
 		.identity = "PC87307/PC97307",
 	};
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof ident))
+			return -EFAULT;
+		return 0;
 
-		case WDIOC_GETSUPPORT:
-			if (copy_to_user(argp, &ident, sizeof ident))
-				return -EFAULT;
-			return 0;
+	case WDIOC_GETSTATUS:
+		return put_user(sc1200wdt_status(), p);
 
-		case WDIOC_GETSTATUS:
-			return put_user(sc1200wdt_status(), p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
 
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
 
-		case WDIOC_KEEPALIVE:
-			sc1200wdt_write_data(WDTO, timeout);
-			return 0;
+		if (get_user(options, p))
+			return -EFAULT;
 
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_timeout, p))
-				return -EFAULT;
-
-			/* the API states this is given in secs */
-			new_timeout /= 60;
-			if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
-				return -EINVAL;
-
-			timeout = new_timeout;
-			sc1200wdt_write_data(WDTO, timeout);
-			/* fall through and return the new timeout */
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout * 60, p);
-
-		case WDIOC_SETOPTIONS:
-		{
-			int options, retval = -EINVAL;
+		if (options & WDIOS_DISABLECARD) {
+			sc1200wdt_stop();
+			retval = 0;
+		}
 
-			if (get_user(options, p))
-				return -EFAULT;
+		if (options & WDIOS_ENABLECARD) {
+			sc1200wdt_start();
+			retval = 0;
+		}
 
-			if (options & WDIOS_DISABLECARD) {
-				sc1200wdt_stop();
-				retval = 0;
-			}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		sc1200wdt_write_data(WDTO, timeout);
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		/* the API states this is given in secs */
+		new_timeout /= 60;
+		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		timeout = new_timeout;
+		sc1200wdt_write_data(WDTO, timeout);
+		/* fall through and return the new timeout */
 
-			if (options & WDIOS_ENABLECARD) {
-				sc1200wdt_start();
-				retval = 0;
-			}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout * 60, p);
 
-			return retval;
-		}
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -240,16 +257,18 @@ static int sc1200wdt_release(struct inode *inode, struct file *file)
 		printk(KERN_INFO PFX "Watchdog disabled\n");
 	} else {
 		sc1200wdt_write_data(WDTO, timeout);
-		printk(KERN_CRIT PFX "Unexpected close!, timeout = %d min(s)\n", timeout);
+		printk(KERN_CRIT PFX
+			"Unexpected close!, timeout = %d min(s)\n", timeout);
 	}
-	up(&open_sem);
+	clear_bit(0, &open_flag);
 	expect_close = 0;
 
 	return 0;
 }
 
 
-static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+static ssize_t sc1200wdt_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
 {
 	if (len) {
 		if (!nowayout) {
@@ -260,7 +279,7 @@ static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_
 			for (i = 0; i != len; i++) {
 				char c;
 
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -275,7 +294,8 @@ static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_
 }
 
 
-static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int sc1200wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
 	if (code == SYS_DOWN || code == SYS_HALT)
 		sc1200wdt_stop();
@@ -284,23 +304,20 @@ static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code,
 }
 
 
-static struct notifier_block sc1200wdt_notifier =
-{
+static struct notifier_block sc1200wdt_notifier = {
 	.notifier_call =	sc1200wdt_notify_sys,
 };
 
-static const struct file_operations sc1200wdt_fops =
-{
+static const struct file_operations sc1200wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= sc1200wdt_write,
-	.ioctl		= sc1200wdt_ioctl,
+	.unlocked_ioctl = sc1200wdt_ioctl,
 	.open		= sc1200wdt_open,
 	.release	= sc1200wdt_release,
 };
 
-static struct miscdevice sc1200wdt_miscdev =
-{
+static struct miscdevice sc1200wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &sc1200wdt_fops,
@@ -312,14 +329,14 @@ static int __init sc1200wdt_probe(void)
 	/* The probe works by reading the PMC3 register's default value of 0x0e
 	 * there is one caveat, if the device disables the parallel port or any
 	 * of the UARTs we won't be able to detect it.
-	 * Nb. This could be done with accuracy by reading the SID registers, but
-	 * we don't have access to those io regions.
+	 * NB. This could be done with accuracy by reading the SID registers,
+	 * but we don't have access to those io regions.
 	 */
 
 	unsigned char reg;
 
 	sc1200wdt_read_data(PMC3, &reg);
-	reg &= 0x0f;				/* we don't want the UART busy bits */
+	reg &= 0x0f;		/* we don't want the UART busy bits */
 	return (reg == 0x0e) ? 0 : -ENODEV;
 }
 
@@ -332,7 +349,8 @@ static struct pnp_device_id scl200wdt_pnp_devices[] = {
 	{.id = ""},
 };
 
-static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
+static int scl200wdt_pnp_probe(struct pnp_dev *dev,
+					const struct pnp_device_id *dev_id)
 {
 	/* this driver only supports one card at a time */
 	if (wdt_dev || !isapnp)
@@ -347,13 +365,14 @@ static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id
 		return -EBUSY;
 	}
 
-	printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", io, io_len);
+	printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n",
+								io, io_len);
 	return 0;
 }
 
-static void scl200wdt_pnp_remove(struct pnp_dev * dev)
+static void scl200wdt_pnp_remove(struct pnp_dev *dev)
 {
-	if (wdt_dev){
+	if (wdt_dev) {
 		release_region(io, io_len);
 		wdt_dev = NULL;
 	}
@@ -375,8 +394,6 @@ static int __init sc1200wdt_init(void)
 
 	printk("%s\n", banner);
 
-	sema_init(&open_sem, 1);
-
 #if defined CONFIG_PNP
 	if (isapnp) {
 		ret = pnp_register_driver(&scl200wdt_pnp_driver);
@@ -410,13 +427,16 @@ static int __init sc1200wdt_init(void)
 
 	ret = register_reboot_notifier(&sc1200wdt_notifier);
 	if (ret) {
-		printk(KERN_ERR PFX "Unable to register reboot notifier err = %d\n", ret);
+		printk(KERN_ERR PFX
+			"Unable to register reboot notifier err = %d\n", ret);
 		goto out_io;
 	}
 
 	ret = misc_register(&sc1200wdt_miscdev);
 	if (ret) {
-		printk(KERN_ERR PFX "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR);
+		printk(KERN_ERR PFX
+			"Unable to register miscdev on minor %d\n",
+							WATCHDOG_MINOR);
 		goto out_rbt;
 	}
 
@@ -446,7 +466,7 @@ static void __exit sc1200wdt_exit(void)
 	unregister_reboot_notifier(&sc1200wdt_notifier);
 
 #if defined CONFIG_PNP
-	if(isapnp)
+	if (isapnp)
 		pnp_unregister_driver(&scl200wdt_pnp_driver);
 	else
 #endif
diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c
index 2847324a2be..a2b6c1067ec 100644
--- a/drivers/watchdog/sc520_wdt.c
+++ b/drivers/watchdog/sc520_wdt.c
@@ -64,9 +64,9 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define OUR_NAME "sc520_wdt"
@@ -91,13 +91,18 @@
  */
 
 #define WATCHDOG_TIMEOUT 30		/* 30 sec default timeout */
-static int timeout = WATCHDOG_TIMEOUT;	/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1 <= timeout <= 3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * AMD Elan SC520 - Watchdog Timer Registers
@@ -136,8 +141,7 @@ static void wdt_timer_ping(unsigned long data)
 	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
 	 * we agree to ping the WDT
 	 */
-	if(time_before(jiffies, next_heartbeat))
-	{
+	if (time_before(jiffies, next_heartbeat)) {
 		/* Ping the WDT */
 		spin_lock(&wdt_spinlock);
 		writew(0xAAAA, wdtmrctl);
@@ -146,9 +150,9 @@ static void wdt_timer_ping(unsigned long data)
 
 		/* Re-set the timer interval */
 		mod_timer(&timer, jiffies + WDT_INTERVAL);
-	} else {
-		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
-	}
+	} else
+		printk(KERN_WARNING PFX
+			"Heartbeat lost! Will not ping the watchdog\n");
 }
 
 /*
@@ -162,7 +166,7 @@ static void wdt_config(int writeval)
 
 	/* buy some time (ping) */
 	spin_lock_irqsave(&wdt_spinlock, flags);
-	dummy=readw(wdtmrctl);	/* ensure write synchronization */
+	dummy = readw(wdtmrctl);	/* ensure write synchronization */
 	writew(0xAAAA, wdtmrctl);
 	writew(0x5555, wdtmrctl);
 	/* unlock WDT = make WDT configuration register writable one time */
@@ -219,10 +223,11 @@ static int wdt_set_heartbeat(int t)
  *	/dev/watchdog handling
  */
 
-static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos)
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count) {
+	if (count) {
 		if (!nowayout) {
 			size_t ofs;
 
@@ -231,25 +236,26 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou
 			wdt_expect_close = 0;
 
 			/* now scan */
-			for(ofs = 0; ofs != count; ofs++) {
+			for (ofs = 0; ofs != count; ofs++) {
 				char c;
 				if (get_user(c, buf + ofs))
 					return -EFAULT;
-				if(c == 'V')
+				if (c == 'V')
 					wdt_expect_close = 42;
 			}
 		}
 
-		/* Well, anyhow someone wrote to us, we should return that favour */
+		/* Well, anyhow someone wrote to us, we should
+		   return that favour */
 		wdt_keepalive();
 	}
 	return count;
 }
 
-static int fop_open(struct inode * inode, struct file * file)
+static int fop_open(struct inode *inode, struct file *file)
 {
 	/* Just in case we're already talking to someone... */
-	if(test_and_set_bit(0, &wdt_is_open))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 	if (nowayout)
 		__module_get(THIS_MODULE);
@@ -259,12 +265,13 @@ static int fop_open(struct inode * inode, struct file * file)
 	return nonseekable_open(inode, file);
 }
 
-static int fop_close(struct inode * inode, struct file * file)
+static int fop_close(struct inode *inode, struct file *file)
 {
-	if(wdt_expect_close == 42) {
+	if (wdt_expect_close == 42)
 		wdt_turnoff();
-	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		wdt_keepalive();
 	}
 	clear_bit(0, &wdt_is_open);
@@ -272,63 +279,62 @@ static int fop_close(struct inode * inode, struct file * file)
 	return 0;
 }
 
-static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "SC520",
 	};
 
-	switch(cmd)
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
 	{
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdt_keepalive();
-			return 0;
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if(get_user(new_options, p))
-				return -EFAULT;
-
-			if(new_options & WDIOS_DISABLECARD) {
-				wdt_turnoff();
-				retval = 0;
-			}
+		int new_options, retval = -EINVAL;
 
-			if(new_options & WDIOS_ENABLECARD) {
-				wdt_startup();
-				retval = 0;
-			}
+		if (get_user(new_options, p))
+			return -EFAULT;
 
-			return retval;
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
 		}
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_timeout;
 
-			if(get_user(new_timeout, p))
-				return -EFAULT;
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
+		}
 
-			if(wdt_set_heartbeat(new_timeout))
-				return -EINVAL;
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
 
-			wdt_keepalive();
-			/* Fall through */
-		}
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+
+		if (wdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -338,7 +344,7 @@ static const struct file_operations wdt_fops = {
 	.write		= fop_write,
 	.open		= fop_open,
 	.release	= fop_close,
-	.ioctl		= fop_ioctl,
+	.unlocked_ioctl	= fop_ioctl,
 };
 
 static struct miscdevice wdt_miscdev = {
@@ -354,7 +360,7 @@ static struct miscdevice wdt_miscdev = {
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_turnoff();
 	return NOTIFY_DONE;
 }
@@ -383,11 +389,13 @@ static int __init sc520_wdt_init(void)
 {
 	int rc = -EBUSY;
 
-	/* Check that the timeout value is within it's range ; if not reset to the default */
+	/* Check that the timeout value is within it's range ;
+	   if not reset to the default */
 	if (wdt_set_heartbeat(timeout)) {
 		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
-		printk(KERN_INFO PFX "timeout value must be 1<=timeout<=3600, using %d\n",
-			WATCHDOG_TIMEOUT);
+		printk(KERN_INFO PFX
+		    "timeout value must be 1 <= timeout <= 3600, using %d\n",
+							WATCHDOG_TIMEOUT);
 	}
 
 	wdtmrctl = ioremap((unsigned long)(MMCR_BASE + OFFS_WDTMRCTL), 2);
@@ -399,20 +407,22 @@ static int __init sc520_wdt_init(void)
 
 	rc = register_reboot_notifier(&wdt_notifier);
 	if (rc) {
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out_ioremap;
 	}
 
 	rc = misc_register(&wdt_miscdev);
 	if (rc) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, rc);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, rc);
 		goto err_out_notifier;
 	}
 
-	printk(KERN_INFO PFX "WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n",
-		timeout,nowayout);
+	printk(KERN_INFO PFX
+	   "WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n",
+							timeout, nowayout);
 
 	return 0;
 
diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c
index d55882bca31..9e19a10a5bb 100644
--- a/drivers/watchdog/scx200_wdt.c
+++ b/drivers/watchdog/scx200_wdt.c
@@ -27,9 +27,8 @@
 #include <linux/fs.h>
 #include <linux/ioport.h>
 #include <linux/scx200.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #define NAME "scx200_wdt"
 
@@ -47,8 +46,9 @@ module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
 
 static u16 wdto_restart;
-static struct semaphore open_semaphore;
 static char expect_close;
+static unsigned long open_lock;
+static DEFINE_SPINLOCK(scx_lock);
 
 /* Bits of the WDCNFG register */
 #define W_ENABLE 0x00fa		/* Enable watchdog */
@@ -59,7 +59,9 @@ static char expect_close;
 
 static void scx200_wdt_ping(void)
 {
+	spin_lock(&scx_lock);
 	outw(wdto_restart, scx200_cb_base + SCx200_WDT_WDTO);
+	spin_unlock(&scx_lock);
 }
 
 static void scx200_wdt_update_margin(void)
@@ -73,9 +75,11 @@ static void scx200_wdt_enable(void)
 	printk(KERN_DEBUG NAME ": enabling watchdog timer, wdto_restart = %d\n",
 	       wdto_restart);
 
+	spin_lock(&scx_lock);
 	outw(0, scx200_cb_base + SCx200_WDT_WDTO);
 	outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS);
 	outw(W_ENABLE, scx200_cb_base + SCx200_WDT_WDCNFG);
+	spin_unlock(&scx_lock);
 
 	scx200_wdt_ping();
 }
@@ -84,15 +88,17 @@ static void scx200_wdt_disable(void)
 {
 	printk(KERN_DEBUG NAME ": disabling watchdog timer\n");
 
+	spin_lock(&scx_lock);
 	outw(0, scx200_cb_base + SCx200_WDT_WDTO);
 	outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS);
 	outw(W_DISABLE, scx200_cb_base + SCx200_WDT_WDCNFG);
+	spin_unlock(&scx_lock);
 }
 
 static int scx200_wdt_open(struct inode *inode, struct file *file)
 {
 	/* only allow one at a time */
-	if (down_trylock(&open_semaphore))
+	if (test_and_set_bit(0, &open_lock))
 		return -EBUSY;
 	scx200_wdt_enable();
 
@@ -101,13 +107,12 @@ static int scx200_wdt_open(struct inode *inode, struct file *file)
 
 static int scx200_wdt_release(struct inode *inode, struct file *file)
 {
-	if (expect_close != 42) {
+	if (expect_close != 42)
 		printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n");
-	} else if (!nowayout) {
+	else if (!nowayout)
 		scx200_wdt_disable();
-	}
 	expect_close = 0;
-	up(&open_semaphore);
+	clear_bit(0, &open_lock);
 
 	return 0;
 }
@@ -122,8 +127,7 @@ static int scx200_wdt_notify_sys(struct notifier_block *this,
 	return NOTIFY_DONE;
 }
 
-static struct notifier_block scx200_wdt_notifier =
-{
+static struct notifier_block scx200_wdt_notifier = {
 	.notifier_call = scx200_wdt_notify_sys,
 };
 
@@ -131,8 +135,7 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data,
 				     size_t len, loff_t *ppos)
 {
 	/* check for a magic close character */
-	if (len)
-	{
+	if (len) {
 		size_t i;
 
 		scx200_wdt_ping();
@@ -140,7 +143,7 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data,
 		expect_close = 0;
 		for (i = 0; i < len; ++i) {
 			char c;
-			if (get_user(c, data+i))
+			if (get_user(c, data + i))
 				return -EFAULT;
 			if (c == 'V')
 				expect_close = 42;
@@ -152,23 +155,21 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data,
 	return 0;
 }
 
-static int scx200_wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long scx200_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.identity = "NatSemi SCx200 Watchdog",
 		.firmware_version = 1,
-		.options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING),
+		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	};
 	int new_margin;
 
 	switch (cmd) {
-	default:
-		return -ENOTTY;
 	case WDIOC_GETSUPPORT:
-		if(copy_to_user(argp, &ident, sizeof(ident)))
+		if (copy_to_user(argp, &ident, sizeof(ident)))
 			return -EFAULT;
 		return 0;
 	case WDIOC_GETSTATUS:
@@ -191,22 +192,24 @@ static int scx200_wdt_ioctl(struct inode *inode, struct file *file,
 		if (put_user(margin, p))
 			return -EFAULT;
 		return 0;
+	default:
+		return -ENOTTY;
 	}
 }
 
 static const struct file_operations scx200_wdt_fops = {
-	.owner	 = THIS_MODULE,
-	.llseek	 = no_llseek,
-	.write   = scx200_wdt_write,
-	.ioctl   = scx200_wdt_ioctl,
-	.open    = scx200_wdt_open,
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = scx200_wdt_write,
+	.unlocked_ioctl = scx200_wdt_ioctl,
+	.open = scx200_wdt_open,
 	.release = scx200_wdt_release,
 };
 
 static struct miscdevice scx200_wdt_miscdev = {
 	.minor = WATCHDOG_MINOR,
-	.name  = "watchdog",
-	.fops  = &scx200_wdt_fops,
+	.name = "watchdog",
+	.fops = &scx200_wdt_fops,
 };
 
 static int __init scx200_wdt_init(void)
@@ -229,8 +232,6 @@ static int __init scx200_wdt_init(void)
 	scx200_wdt_update_margin();
 	scx200_wdt_disable();
 
-	sema_init(&open_semaphore, 1);
-
 	r = register_reboot_notifier(&scx200_wdt_notifier);
 	if (r) {
 		printk(KERN_ERR NAME ": unable to register reboot notifier");
@@ -263,7 +264,7 @@ module_exit(scx200_wdt_cleanup);
 
 /*
     Local variables:
-        compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules"
-        c-basic-offset: 8
+	compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules"
+	c-basic-offset: 8
     End:
 */
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
index 1277f7e9cc5..cdc7138be30 100644
--- a/drivers/watchdog/shwdt.c
+++ b/drivers/watchdog/shwdt.c
@@ -28,8 +28,8 @@
 #include <linux/ioport.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <asm/watchdog.h>
 
 #define PFX "shwdt: "
@@ -68,10 +68,11 @@ static int clock_division_ratio = WTCSR_CKS_4096;
 static void sh_wdt_ping(unsigned long data);
 
 static unsigned long shwdt_is_open;
-static struct watchdog_info sh_wdt_info;
+static const struct watchdog_info sh_wdt_info;
 static char shwdt_expect_close;
 static DEFINE_TIMER(timer, sh_wdt_ping, 0, 0);
 static unsigned long next_heartbeat;
+static DEFINE_SPINLOCK(shwdt_lock);
 
 #define WATCHDOG_HEARTBEAT 30			/* 30 sec default heartbeat */
 static int heartbeat = WATCHDOG_HEARTBEAT;	/* in seconds */
@@ -86,6 +87,9 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 static void sh_wdt_start(void)
 {
 	__u8 csr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&shwdt_lock, flags);
 
 	next_heartbeat = jiffies + (heartbeat * HZ);
 	mod_timer(&timer, next_ping_period(clock_division_ratio));
@@ -123,6 +127,7 @@ static void sh_wdt_start(void)
 	csr &= ~RSTCSR_RSTS;
 	sh_wdt_write_rstcsr(csr);
 #endif
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -132,12 +137,16 @@ static void sh_wdt_start(void)
 static void sh_wdt_stop(void)
 {
 	__u8 csr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&shwdt_lock, flags);
 
 	del_timer(&timer);
 
 	csr = sh_wdt_read_csr();
 	csr &= ~WTCSR_TME;
 	sh_wdt_write_csr(csr);
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -146,7 +155,11 @@ static void sh_wdt_stop(void)
  */
 static inline void sh_wdt_keepalive(void)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&shwdt_lock, flags);
 	next_heartbeat = jiffies + (heartbeat * HZ);
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -155,10 +168,14 @@ static inline void sh_wdt_keepalive(void)
  */
 static int sh_wdt_set_heartbeat(int t)
 {
-	if (unlikely((t < 1) || (t > 3600))) /* arbitrary upper limit */
+	unsigned long flags;
+
+	if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
 		return -EINVAL;
 
+	spin_lock_irqsave(&shwdt_lock, flags);
 	heartbeat = t;
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 	return 0;
 }
 
@@ -170,6 +187,9 @@ static int sh_wdt_set_heartbeat(int t)
  */
 static void sh_wdt_ping(unsigned long data)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&shwdt_lock, flags);
 	if (time_before(jiffies, next_heartbeat)) {
 		__u8 csr;
 
@@ -183,6 +203,7 @@ static void sh_wdt_ping(unsigned long data)
 	} else
 		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping "
 		       "the watchdog\n");
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -310,7 +331,6 @@ static int sh_wdt_mmap(struct file *file, struct vm_area_struct *vma)
 
 /**
  * 	sh_wdt_ioctl - Query Device
- * 	@inode: inode of device
  * 	@file: file handle of device
  * 	@cmd: watchdog command
  * 	@arg: argument
@@ -318,53 +338,51 @@ static int sh_wdt_mmap(struct file *file, struct vm_area_struct *vma)
  * 	Query basic information from the device or ping it, as outlined by the
  * 	watchdog API.
  */
-static int sh_wdt_ioctl(struct inode *inode, struct file *file,
-			unsigned int cmd, unsigned long arg)
+static long sh_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int new_heartbeat;
 	int options, retval = -EINVAL;
 
 	switch (cmd) {
-		case WDIOC_GETSUPPORT:
-			return copy_to_user((struct watchdog_info *)arg,
-					  &sh_wdt_info,
-					  sizeof(sh_wdt_info)) ? -EFAULT : 0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, (int *)arg);
-		case WDIOC_KEEPALIVE:
-			sh_wdt_keepalive();
-			return 0;
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_heartbeat, (int *)arg))
-				return -EFAULT;
-
-			if (sh_wdt_set_heartbeat(new_heartbeat))
-				return -EINVAL;
-
-			sh_wdt_keepalive();
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, (int *)arg);
-		case WDIOC_SETOPTIONS:
-			if (get_user(options, (int *)arg))
-				return -EFAULT;
-
-			if (options & WDIOS_DISABLECARD) {
-				sh_wdt_stop();
-				retval = 0;
-			}
+	case WDIOC_GETSUPPORT:
+		return copy_to_user((struct watchdog_info *)arg,
+			  &sh_wdt_info, sizeof(sh_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int *)arg);
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, (int *)arg))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			sh_wdt_stop();
+			retval = 0;
+		}
 
-			if (options & WDIOS_ENABLECARD) {
-				sh_wdt_start();
-				retval = 0;
-			}
+		if (options & WDIOS_ENABLECARD) {
+			sh_wdt_start();
+			retval = 0;
+		}
 
-			return retval;
-		default:
-			return -ENOTTY;
-	}
+		return retval;
+	case WDIOC_KEEPALIVE:
+		sh_wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, (int *)arg))
+			return -EFAULT;
 
+		if (sh_wdt_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+
+		sh_wdt_keepalive();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, (int *)arg);
+	default:
+		return -ENOTTY;
+	}
 	return 0;
 }
 
@@ -390,13 +408,13 @@ static const struct file_operations sh_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= sh_wdt_write,
-	.ioctl		= sh_wdt_ioctl,
+	.unlocked_ioctl	= sh_wdt_ioctl,
 	.open		= sh_wdt_open,
 	.release	= sh_wdt_close,
 	.mmap		= sh_wdt_mmap,
 };
 
-static struct watchdog_info sh_wdt_info = {
+static const struct watchdog_info sh_wdt_info = {
 	.options		= WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
 				  WDIOF_MAGICCLOSE,
 	.firmware_version	= 1,
@@ -422,30 +440,33 @@ static int __init sh_wdt_init(void)
 {
 	int rc;
 
-	if ((clock_division_ratio < 0x5) || (clock_division_ratio > 0x7)) {
+	if (clock_division_ratio < 0x5 || clock_division_ratio > 0x7) {
 		clock_division_ratio = WTCSR_CKS_4096;
-		printk(KERN_INFO PFX "clock_division_ratio value must "
-		       "be 0x5<=x<=0x7, using %d\n", clock_division_ratio);
+		printk(KERN_INFO PFX
+		  "clock_division_ratio value must be 0x5<=x<=0x7, using %d\n",
+				clock_division_ratio);
 	}
 
 	rc = sh_wdt_set_heartbeat(heartbeat);
 	if (unlikely(rc)) {
 		heartbeat = WATCHDOG_HEARTBEAT;
-		printk(KERN_INFO PFX "heartbeat value must "
-		       "be 1<=x<=3600, using %d\n", heartbeat);
+		printk(KERN_INFO PFX
+			"heartbeat value must be 1<=x<=3600, using %d\n",
+								heartbeat);
 	}
 
 	rc = register_reboot_notifier(&sh_wdt_notifier);
 	if (unlikely(rc)) {
-		printk(KERN_ERR PFX "Can't register reboot notifier (err=%d)\n",
-		       rc);
+		printk(KERN_ERR PFX
+			"Can't register reboot notifier (err=%d)\n", rc);
 		return rc;
 	}
 
 	rc = misc_register(&sh_wdt_miscdev);
 	if (unlikely(rc)) {
-		printk(KERN_ERR PFX "Can't register miscdev on "
-		       "minor=%d (err=%d)\n", sh_wdt_miscdev.minor, rc);
+		printk(KERN_ERR PFX
+			"Can't register miscdev on minor=%d (err=%d)\n",
+						sh_wdt_miscdev.minor, rc);
 		unregister_reboot_notifier(&sh_wdt_notifier);
 		return rc;
 	}
@@ -476,10 +497,14 @@ module_param(clock_division_ratio, int, 0);
 MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")");
 
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<=heartbeat<=3600, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat,
+	"Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
+				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
 
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 module_init(sh_wdt_init);
 module_exit(sh_wdt_exit);
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index 5d2b5ba6141..988ff1d5b4b 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -18,7 +18,7 @@
  *  History:
  *	2003 - Created version 1.0 for Linux 2.4.x.
  *	2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE
- *             features. Released version 1.1
+ *	       features. Released version 1.1
  *
  *  Theory of operation:
  *
@@ -55,9 +55,9 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 /* enable support for minutes as units? */
@@ -71,15 +71,15 @@
 #define UNIT_MINUTE     1
 
 #define MODNAME		"smsc37b787_wdt: "
-#define VERSION         "1.1"
+#define VERSION		"1.1"
 
-#define IOPORT          0x3F0
+#define IOPORT		0x3F0
 #define IOPORT_SIZE     2
-#define IODEV_NO        8
+#define IODEV_NO	8
 
-static int unit = UNIT_SECOND;  /* timer's unit */
-static int timeout = 60;        /* timeout value: default is 60 "units" */
-static unsigned long timer_enabled = 0;   /* is the timer enabled? */
+static int unit = UNIT_SECOND;	/* timer's unit */
+static int timeout = 60;	/* timeout value: default is 60 "units" */
+static unsigned long timer_enabled;   /* is the timer enabled? */
 
 static char expect_close;       /* is the close expected? */
 
@@ -93,114 +93,121 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 
 static inline void open_io_config(void)
 {
-        outb(0x55, IOPORT);
+	outb(0x55, IOPORT);
 	mdelay(1);
-        outb(0x55, IOPORT);
+	outb(0x55, IOPORT);
 }
 
 /* lock the IO chip */
 static inline void close_io_config(void)
 {
-        outb(0xAA, IOPORT);
+	outb(0xAA, IOPORT);
 }
 
 /* select the IO device */
 static inline void select_io_device(unsigned char devno)
 {
-        outb(0x07, IOPORT);
-        outb(devno, IOPORT+1);
+	outb(0x07, IOPORT);
+	outb(devno, IOPORT+1);
 }
 
 /* write to the control register */
 static inline void write_io_cr(unsigned char reg, unsigned char data)
 {
-        outb(reg, IOPORT);
-        outb(data, IOPORT+1);
+	outb(reg, IOPORT);
+	outb(data, IOPORT+1);
 }
 
 /* read from the control register */
 static inline char read_io_cr(unsigned char reg)
 {
-        outb(reg, IOPORT);
-        return inb(IOPORT+1);
+	outb(reg, IOPORT);
+	return inb(IOPORT+1);
 }
 
 /* -- Medium level functions ------------------------------------*/
 
 static inline void gpio_bit12(unsigned char reg)
 {
-	// -- General Purpose I/O Bit 1.2 --
-	// Bit 0,   In/Out: 0 = Output, 1 = Input
-	// Bit 1,   Polarity: 0 = No Invert, 1 = Invert
-	// Bit 2,   Group Enable Intr.: 0 = Disable, 1 = Enable
-	// Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
-	//                           11 = Either Edge Triggered Intr. 2
-        // Bit 5/6  (Reserved)
-	// Bit 7,   Output Type: 0 = Push Pull Bit, 1 = Open Drain
-        write_io_cr(0xE2, reg);
+	/* -- General Purpose I/O Bit 1.2 --
+	 * Bit 0,   In/Out: 0 = Output, 1 = Input
+	 * Bit 1,   Polarity: 0 = No Invert, 1 = Invert
+	 * Bit 2,   Group Enable Intr.: 0 = Disable, 1 = Enable
+	 * Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
+	 *                           11 = Either Edge Triggered Intr. 2
+	 * Bit 5/6  (Reserved)
+	 * Bit 7,   Output Type: 0 = Push Pull Bit, 1 = Open Drain
+	 */
+	write_io_cr(0xE2, reg);
 }
 
 static inline void gpio_bit13(unsigned char reg)
 {
-	// -- General Purpose I/O Bit 1.3 --
-	// Bit 0,  In/Out: 0 = Output, 1 = Input
-	// Bit 1,  Polarity: 0 = No Invert, 1 = Invert
-	// Bit 2,  Group Enable Intr.: 0 = Disable, 1 = Enable
-	// Bit 3,  Function select: 0 = GPI/O, 1 = LED
-        // Bit 4-6 (Reserved)
-	// Bit 7,  Output Type: 0 = Push Pull Bit, 1 = Open Drain
-        write_io_cr(0xE3, reg);
+	/* -- General Purpose I/O Bit 1.3 --
+	 * Bit 0,  In/Out: 0 = Output, 1 = Input
+	 * Bit 1,  Polarity: 0 = No Invert, 1 = Invert
+	 * Bit 2,  Group Enable Intr.: 0 = Disable, 1 = Enable
+	 * Bit 3,  Function select: 0 = GPI/O, 1 = LED
+	 * Bit 4-6 (Reserved)
+	 * Bit 7,  Output Type: 0 = Push Pull Bit, 1 = Open Drain
+	 */
+	write_io_cr(0xE3, reg);
 }
 
 static inline void wdt_timer_units(unsigned char new_units)
 {
-	// -- Watchdog timer units --
-	// Bit 0-6 (Reserved)
-	// Bit 7,  WDT Time-out Value Units Select
-	//         (0 = Minutes, 1 = Seconds)
-        write_io_cr(0xF1, new_units);
+	/* -- Watchdog timer units --
+	 * Bit 0-6 (Reserved)
+	 * Bit 7,  WDT Time-out Value Units Select
+	 *         (0 = Minutes, 1 = Seconds)
+	 */
+	write_io_cr(0xF1, new_units);
 }
 
 static inline void wdt_timeout_value(unsigned char new_timeout)
 {
-	// -- Watchdog Timer Time-out Value --
-	// Bit 0-7 Binary coded units (0=Disabled, 1..255)
-        write_io_cr(0xF2, new_timeout);
+	/* -- Watchdog Timer Time-out Value --
+	 * Bit 0-7 Binary coded units (0=Disabled, 1..255)
+	 */
+	write_io_cr(0xF2, new_timeout);
 }
 
 static inline void wdt_timer_conf(unsigned char conf)
 {
-	// -- Watchdog timer configuration --
-	// Bit 0   Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O
-	// Bit 1   Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
-	// Bit 2   Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr.
-        // Bit 3   Reset the timer
-        //         (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled)
-	// Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
-	//            0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
-        write_io_cr(0xF3, conf);
+	/* -- Watchdog timer configuration --
+	 * Bit 0   Joystick enable: 0* = No Reset, 1 = Reset WDT upon
+	 *							Gameport I/O
+	 * Bit 1   Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
+	 * Bit 2   Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr
+	 * Bit 3   Reset the timer
+	 *         (Wrong in SMsC documentation? Given as: PowerLED Timout
+	 *							Enabled)
+	 * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
+	 *            0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
+	 */
+	write_io_cr(0xF3, conf);
 }
 
 static inline void wdt_timer_ctrl(unsigned char reg)
 {
-	// -- Watchdog timer control --
-	// Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occured
-	// Bit 1   Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
-	// Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
-	// Bit 3   P20 Force Timeout enabled:
-	//          0 = P20 activity does not generate the WD timeout event
-	//          1 = P20 Allows rising edge of P20, from the keyboard
-	//              controller, to force the WD timeout event.
-	// Bit 4   (Reserved)
-	// -- Soft power management --
-	// Bit 5   Stop Counter: 1 = Stop software power down counter
-	//            set via register 0xB8, (self-cleaning)
-	//            (Upon read: 0 = Counter running, 1 = Counter stopped)
-	// Bit 6   Restart Counter: 1 = Restart software power down counter
-	//            set via register 0xB8, (self-cleaning)
-	// Bit 7   SPOFF: 1 = Force software power down (self-cleaning)
-
-        write_io_cr(0xF4, reg);
+	/* -- Watchdog timer control --
+	 * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occured
+	 * Bit 1   Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
+	 * Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
+	 * Bit 3   P20 Force Timeout enabled:
+	 *          0 = P20 activity does not generate the WD timeout event
+	 *          1 = P20 Allows rising edge of P20, from the keyboard
+	 *              controller, to force the WD timeout event.
+	 * Bit 4   (Reserved)
+	 * -- Soft power management --
+	 * Bit 5   Stop Counter: 1 = Stop software power down counter
+	 *            set via register 0xB8, (self-cleaning)
+	 *            (Upon read: 0 = Counter running, 1 = Counter stopped)
+	 * Bit 6   Restart Counter: 1 = Restart software power down counter
+	 *            set via register 0xB8, (self-cleaning)
+	 * Bit 7   SPOFF: 1 = Force software power down (self-cleaning)
+	 */
+	write_io_cr(0xF4, reg);
 }
 
 /* -- Higher level functions ------------------------------------*/
@@ -209,33 +216,34 @@ static inline void wdt_timer_ctrl(unsigned char reg)
 
 static void wb_smsc_wdt_initialize(void)
 {
-        unsigned char old;
+	unsigned char old;
 
 	spin_lock(&io_lock);
-        open_io_config();
-        select_io_device(IODEV_NO);
+	open_io_config();
+	select_io_device(IODEV_NO);
 
-	// enable the watchdog
-	gpio_bit13(0x08);  // Select pin 80 = LED not GPIO
-	gpio_bit12(0x0A);  // Set pin 79 = WDT not GPIO/Output/Polarity=Invert
+	/* enable the watchdog */
+	gpio_bit13(0x08);  /* Select pin 80 = LED not GPIO */
+	gpio_bit12(0x0A);  /* Set pin 79 = WDT not
+			      GPIO/Output/Polarity=Invert */
+	/* disable the timeout */
+	wdt_timeout_value(0);
 
-	// disable the timeout
-        wdt_timeout_value(0);
+	/* reset control register */
+	wdt_timer_ctrl(0x00);
 
-	// reset control register
-        wdt_timer_ctrl(0x00);
-
-	// reset configuration register
+	/* reset configuration register */
 	wdt_timer_conf(0x00);
 
-	// read old (timer units) register
-        old = read_io_cr(0xF1) & 0x7F;
-        if (unit == UNIT_SECOND) old |= 0x80; // set to seconds
+	/* read old (timer units) register */
+	old = read_io_cr(0xF1) & 0x7F;
+	if (unit == UNIT_SECOND)
+		old |= 0x80;	/* set to seconds */
 
-	// set the watchdog timer units
-        wdt_timer_units(old);
+	/* set the watchdog timer units */
+	wdt_timer_units(old);
 
-        close_io_config();
+	close_io_config();
 	spin_unlock(&io_lock);
 }
 
@@ -244,23 +252,23 @@ static void wb_smsc_wdt_initialize(void)
 static void wb_smsc_wdt_shutdown(void)
 {
 	spin_lock(&io_lock);
-        open_io_config();
-        select_io_device(IODEV_NO);
+	open_io_config();
+	select_io_device(IODEV_NO);
 
-	// disable the watchdog
-        gpio_bit13(0x09);
-        gpio_bit12(0x09);
+	/* disable the watchdog */
+	gpio_bit13(0x09);
+	gpio_bit12(0x09);
 
-	// reset watchdog config register
+	/* reset watchdog config register */
 	wdt_timer_conf(0x00);
 
-	// reset watchdog control register
-        wdt_timer_ctrl(0x00);
+	/* reset watchdog control register */
+	wdt_timer_ctrl(0x00);
 
-	// disable timeout
-        wdt_timeout_value(0x00);
+	/* disable timeout */
+	wdt_timeout_value(0x00);
 
-        close_io_config();
+	close_io_config();
 	spin_unlock(&io_lock);
 }
 
@@ -269,16 +277,16 @@ static void wb_smsc_wdt_shutdown(void)
 static void wb_smsc_wdt_set_timeout(unsigned char new_timeout)
 {
 	spin_lock(&io_lock);
-        open_io_config();
-        select_io_device(IODEV_NO);
+	open_io_config();
+	select_io_device(IODEV_NO);
 
-	// set Power LED to blink, if we enable the timeout
-        wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
+	/* set Power LED to blink, if we enable the timeout */
+	wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
 
-	// set timeout value
-        wdt_timeout_value(new_timeout);
+	/* set timeout value */
+	wdt_timeout_value(new_timeout);
 
-        close_io_config();
+	close_io_config();
 	spin_unlock(&io_lock);
 }
 
@@ -286,32 +294,32 @@ static void wb_smsc_wdt_set_timeout(unsigned char new_timeout)
 
 static unsigned char wb_smsc_wdt_get_timeout(void)
 {
-        unsigned char set_timeout;
+	unsigned char set_timeout;
 
 	spin_lock(&io_lock);
-        open_io_config();
-        select_io_device(IODEV_NO);
-        set_timeout = read_io_cr(0xF2);
-        close_io_config();
+	open_io_config();
+	select_io_device(IODEV_NO);
+	set_timeout = read_io_cr(0xF2);
+	close_io_config();
 	spin_unlock(&io_lock);
 
-        return set_timeout;
+	return set_timeout;
 }
 
 /* disable watchdog */
 
 static void wb_smsc_wdt_disable(void)
 {
-        // set the timeout to 0 to disable the watchdog
-        wb_smsc_wdt_set_timeout(0);
+	/* set the timeout to 0 to disable the watchdog */
+	wb_smsc_wdt_set_timeout(0);
 }
 
 /* enable watchdog by setting the current timeout */
 
 static void wb_smsc_wdt_enable(void)
 {
-        // set the current timeout...
-        wb_smsc_wdt_set_timeout(timeout);
+	/* set the current timeout... */
+	wb_smsc_wdt_set_timeout(timeout);
 }
 
 /* reset the timer */
@@ -319,14 +327,14 @@ static void wb_smsc_wdt_enable(void)
 static void wb_smsc_wdt_reset_timer(void)
 {
 	spin_lock(&io_lock);
-        open_io_config();
-        select_io_device(IODEV_NO);
+	open_io_config();
+	select_io_device(IODEV_NO);
 
-	// reset the timer
+	/* reset the timer */
 	wdt_timeout_value(timeout);
 	wdt_timer_conf(0x08);
 
-        close_io_config();
+	close_io_config();
 	spin_unlock(&io_lock);
 }
 
@@ -355,7 +363,9 @@ static int wb_smsc_wdt_open(struct inode *inode, struct file *file)
 	/* Reload and activate timer */
 	wb_smsc_wdt_enable();
 
-	printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+	printk(KERN_INFO MODNAME
+		"Watchdog enabled. Timeout set to %d %s.\n",
+		timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
 
 	return nonseekable_open(inode, file);
 }
@@ -367,10 +377,12 @@ static int wb_smsc_wdt_release(struct inode *inode, struct file *file)
 	/* Shut off the timer. */
 
 	if (expect_close == 42) {
-	        wb_smsc_wdt_disable();
-		printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n");
+		wb_smsc_wdt_disable();
+		printk(KERN_INFO MODNAME
+				"Watchdog disabled, sleeping again...\n");
 	} else {
-		printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT MODNAME
+				"Unexpected close, not stopping watchdog!\n");
 		wb_smsc_wdt_reset_timer();
 	}
 
@@ -392,10 +404,11 @@ static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data,
 			/* reset expect flag */
 			expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the
+			   magic character */
 			for (i = 0; i != len; i++) {
 				char c;
-				if (get_user(c, data+i))
+				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -410,8 +423,8 @@ static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data,
 
 /* ioctl => control interface */
 
-static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file,
-			     unsigned int cmd, unsigned long arg)
+static long wb_smsc_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	int new_timeout;
 
@@ -420,89 +433,73 @@ static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file,
 		int __user *i;
 	} uarg;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = 		WDIOF_KEEPALIVEPING |
-		                        WDIOF_SETTIMEOUT |
+					WDIOF_SETTIMEOUT |
 					WDIOF_MAGICCLOSE,
 		.firmware_version =	0,
-		.identity = 		"SMsC 37B787 Watchdog"
+		.identity = 		"SMsC 37B787 Watchdog",
 	};
 
 	uarg.i = (int __user *)arg;
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(uarg.ident, &ident,
-				sizeof(ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-			return put_user(wb_smsc_wdt_status(), uarg.i);
-
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, uarg.i);
-
-		case WDIOC_KEEPALIVE:
-			wb_smsc_wdt_reset_timer();
-			return 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_timeout, uarg.i))
-				return -EFAULT;
-
-			// the API states this is given in secs
-			if (unit == UNIT_MINUTE)
-			  new_timeout /= 60;
-
-			if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
-				return -EINVAL;
-
-			timeout = new_timeout;
-			wb_smsc_wdt_set_timeout(timeout);
-
-			// fall through and return the new timeout...
-
-		case WDIOC_GETTIMEOUT:
-
-		        new_timeout = timeout;
-
-			if (unit == UNIT_MINUTE)
-			  new_timeout *= 60;
-
-			return put_user(new_timeout, uarg.i);
-
-		case WDIOC_SETOPTIONS:
-		{
-			int options, retval = -EINVAL;
-
-			if (get_user(options, uarg.i))
-				return -EFAULT;
-
-			if (options & WDIOS_DISABLECARD) {
-				wb_smsc_wdt_disable();
-				retval = 0;
-			}
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident, &ident, sizeof(ident))
+								? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		return put_user(wb_smsc_wdt_status(), uarg.i);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
 
-			if (options & WDIOS_ENABLECARD) {
-				wb_smsc_wdt_enable();
-				retval = 0;
-			}
+		if (get_user(options, uarg.i))
+			return -EFAULT;
 
-			return retval;
+		if (options & WDIOS_DISABLECARD) {
+			wb_smsc_wdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			wb_smsc_wdt_enable();
+			retval = 0;
 		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wb_smsc_wdt_reset_timer();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+		/* the API states this is given in secs */
+		if (unit == UNIT_MINUTE)
+			new_timeout /= 60;
+		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		timeout = new_timeout;
+		wb_smsc_wdt_set_timeout(timeout);
+		/* fall through and return the new timeout... */
+	case WDIOC_GETTIMEOUT:
+		new_timeout = timeout;
+		if (unit == UNIT_MINUTE)
+			  new_timeout *= 60;
+		return put_user(new_timeout, uarg.i);
+	default:
+		return -ENOTTY;
 	}
 }
 
 /* -- Notifier funtions -----------------------------------------*/
 
-static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int wb_smsc_wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT)
-	{
-                // set timeout to 0, to avoid possible race-condition
-	        timeout = 0;
+	if (code == SYS_DOWN || code == SYS_HALT) {
+		/* set timeout to 0, to avoid possible race-condition */
+		timeout = 0;
 		wb_smsc_wdt_disable();
 	}
 	return NOTIFY_DONE;
@@ -510,23 +507,20 @@ static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long cod
 
 /* -- Module's structures ---------------------------------------*/
 
-static const struct file_operations wb_smsc_wdt_fops =
-{
-	.owner          = THIS_MODULE,
+static const struct file_operations wb_smsc_wdt_fops = {
+	.owner	  = THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wb_smsc_wdt_write,
-	.ioctl		= wb_smsc_wdt_ioctl,
+	.unlocked_ioctl	= wb_smsc_wdt_ioctl,
 	.open		= wb_smsc_wdt_open,
 	.release	= wb_smsc_wdt_release,
 };
 
-static struct notifier_block wb_smsc_wdt_notifier =
-{
+static struct notifier_block wb_smsc_wdt_notifier = {
 	.notifier_call  = wb_smsc_wdt_notify_sys,
 };
 
-static struct miscdevice wb_smsc_wdt_miscdev =
-{
+static struct miscdevice wb_smsc_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &wb_smsc_wdt_fops,
@@ -540,39 +534,44 @@ static int __init wb_smsc_wdt_init(void)
 {
 	int ret;
 
-	printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n");
+	printk(KERN_INFO "SMsC 37B787 watchdog component driver "
+					VERSION " initialising...\n");
 
 	if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
-		printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT);
+		printk(KERN_ERR MODNAME "Unable to register IO port %#x\n",
+								IOPORT);
 		ret = -EBUSY;
 		goto out_pnp;
 	}
 
-        // set new maximum, if it's too big
-        if (timeout > MAX_TIMEOUT)
-               timeout = MAX_TIMEOUT;
+	/* set new maximum, if it's too big */
+	if (timeout > MAX_TIMEOUT)
+		timeout = MAX_TIMEOUT;
 
-        // init the watchdog timer
-        wb_smsc_wdt_initialize();
+	/* init the watchdog timer */
+	wb_smsc_wdt_initialize();
 
 	ret = register_reboot_notifier(&wb_smsc_wdt_notifier);
 	if (ret) {
-		printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret);
+		printk(KERN_ERR MODNAME
+			"Unable to register reboot notifier err = %d\n", ret);
 		goto out_io;
 	}
 
 	ret = misc_register(&wb_smsc_wdt_miscdev);
 	if (ret) {
-		printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR);
+		printk(KERN_ERR MODNAME
+			"Unable to register miscdev on minor %d\n",
+							WATCHDOG_MINOR);
 		goto out_rbt;
 	}
 
-	// output info
-	printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
-	printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout);
-
-	// ret = 0
-
+	/* output info */
+	printk(KERN_INFO MODNAME "Timeout set to %d %s.\n",
+		timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+	printk(KERN_INFO MODNAME
+		"Watchdog initialized and sleeping (nowayout=%d)...\n",
+								nowayout);
 out_clean:
 	return ret;
 
@@ -591,8 +590,7 @@ out_pnp:
 static void __exit wb_smsc_wdt_exit(void)
 {
 	/* Stop the timer before we leave */
-	if (!nowayout)
-	{
+	if (!nowayout) {
 		wb_smsc_wdt_shutdown();
 		printk(KERN_INFO MODNAME "Watchdog disabled.\n");
 	}
@@ -601,25 +599,29 @@ static void __exit wb_smsc_wdt_exit(void)
 	unregister_reboot_notifier(&wb_smsc_wdt_notifier);
 	release_region(IOPORT, IOPORT_SIZE);
 
-	printk("SMsC 37B787 watchdog component driver removed.\n");
+	printk(KERN_INFO "SMsC 37B787 watchdog component driver removed.\n");
 }
 
 module_init(wb_smsc_wdt_init);
 module_exit(wb_smsc_wdt_exit);
 
 MODULE_AUTHOR("Sven Anders <anders@anduras.de>");
-MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")");
+MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version "
+								VERSION ")");
 MODULE_LICENSE("GPL");
 
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 #ifdef SMSC_SUPPORT_MINUTES
 module_param(unit, int, 0);
-MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0");
+MODULE_PARM_DESC(unit,
+		"set unit to use, 0=seconds or 1=minutes, default is 0");
 #endif
 
 module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60");
 
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c
index 9c369490924..c650464c5c6 100644
--- a/drivers/watchdog/softdog.c
+++ b/drivers/watchdog/softdog.c
@@ -47,19 +47,22 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
-
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #define PFX "SoftDog: "
 
 #define TIMER_MARGIN	60		/* Default is 60 seconds */
 static int soft_margin = TIMER_MARGIN;	/* in seconds */
 module_param(soft_margin, int, 0);
-MODULE_PARM_DESC(soft_margin, "Watchdog soft_margin in seconds. (0<soft_margin<65536, default=" __MODULE_STRING(TIMER_MARGIN) ")");
+MODULE_PARM_DESC(soft_margin,
+	"Watchdog soft_margin in seconds. (0 < soft_margin < 65536, default="
+					__MODULE_STRING(TIMER_MARGIN) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 #ifdef ONLY_TESTING
 static int soft_noboot = 1;
@@ -93,8 +96,7 @@ static void watchdog_fire(unsigned long data)
 
 	if (soft_noboot)
 		printk(KERN_CRIT PFX "Triggered - Reboot ignored.\n");
-	else
-	{
+	else {
 		printk(KERN_CRIT PFX "Initiating system reboot.\n");
 		emergency_restart();
 		printk(KERN_CRIT PFX "Reboot didn't ?????\n");
@@ -153,7 +155,8 @@ static int softdog_release(struct inode *inode, struct file *file)
 		softdog_stop();
 		module_put(THIS_MODULE);
 	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		set_bit(0, &orphan_timer);
 		softdog_keepalive();
 	}
@@ -162,12 +165,13 @@ static int softdog_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t softdog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+static ssize_t softdog_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
 {
 	/*
 	 *	Refresh the timer.
 	 */
-	if(len) {
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 
@@ -188,13 +192,13 @@ static ssize_t softdog_write(struct file *file, const char __user *data, size_t
 	return len;
 }
 
-static int softdog_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long softdog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_margin;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
@@ -202,26 +206,25 @@ static int softdog_ioctl(struct inode *inode, struct file *file,
 		.identity =		"Software Watchdog",
 	};
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident,
-				sizeof(ident)) ? -EFAULT : 0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			softdog_keepalive();
-			return 0;
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_margin, p))
-				return -EFAULT;
-			if (softdog_set_heartbeat(new_margin))
-				return -EINVAL;
-			softdog_keepalive();
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(soft_margin, p);
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		softdog_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+		if (softdog_set_heartbeat(new_margin))
+			return -EINVAL;
+		softdog_keepalive();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(soft_margin, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -232,10 +235,9 @@ static int softdog_ioctl(struct inode *inode, struct file *file,
 static int softdog_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT) {
+	if (code == SYS_DOWN || code == SYS_HALT)
 		/* Turn the WDT off */
 		softdog_stop();
-	}
 	return NOTIFY_DONE;
 }
 
@@ -247,7 +249,7 @@ static const struct file_operations softdog_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= softdog_write,
-	.ioctl		= softdog_ioctl,
+	.unlocked_ioctl	= softdog_ioctl,
 	.open		= softdog_open,
 	.release	= softdog_release,
 };
@@ -268,24 +270,27 @@ static int __init watchdog_init(void)
 {
 	int ret;
 
-	/* Check that the soft_margin value is within it's range ; if not reset to the default */
+	/* Check that the soft_margin value is within it's range;
+	   if not reset to the default */
 	if (softdog_set_heartbeat(soft_margin)) {
 		softdog_set_heartbeat(TIMER_MARGIN);
-		printk(KERN_INFO PFX "soft_margin value must be 0<soft_margin<65536, using %d\n",
+		printk(KERN_INFO PFX
+		    "soft_margin must be 0 < soft_margin < 65536, using %d\n",
 			TIMER_MARGIN);
 	}
 
 	ret = register_reboot_notifier(&softdog_notifier);
 	if (ret) {
-		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		return ret;
 	}
 
 	ret = misc_register(&softdog_miscdev);
 	if (ret) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						WATCHDOG_MINOR, ret);
 		unregister_reboot_notifier(&softdog_notifier);
 		return ret;
 	}
diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c
index 57cefef27ce..6adab77fbbb 100644
--- a/drivers/watchdog/txx9wdt.c
+++ b/drivers/watchdog/txx9wdt.c
@@ -45,27 +45,34 @@ static unsigned long txx9wdt_alive;
 static int expect_close;
 static struct txx9_tmr_reg __iomem *txx9wdt_reg;
 static struct clk *txx9_imclk;
+static DEFINE_SPINLOCK(txx9_lock);
 
 static void txx9wdt_ping(void)
 {
+	spin_lock(&txx9_lock);
 	__raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr);
+	spin_unlock(&txx9_lock);
 }
 
 static void txx9wdt_start(void)
 {
+	spin_lock(&txx9_lock);
 	__raw_writel(WD_TIMER_CLK * timeout, &txx9wdt_reg->cpra);
 	__raw_writel(WD_TIMER_CCD, &txx9wdt_reg->ccdr);
 	__raw_writel(0, &txx9wdt_reg->tisr);	/* clear pending interrupt */
 	__raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG,
 		     &txx9wdt_reg->tcr);
 	__raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr);
+	spin_unlock(&txx9_lock);
 }
 
 static void txx9wdt_stop(void)
 {
+	spin_lock(&txx9_lock);
 	__raw_writel(TXx9_TMWTMR_WDIS, &txx9wdt_reg->wtmr);
 	__raw_writel(__raw_readl(&txx9wdt_reg->tcr) & ~TXx9_TMTCR_TCE,
 		     &txx9wdt_reg->tcr);
+	spin_unlock(&txx9_lock);
 }
 
 static int txx9wdt_open(struct inode *inode, struct file *file)
@@ -120,13 +127,13 @@ static ssize_t txx9wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int txx9wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long txx9wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_timeout;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
@@ -135,8 +142,6 @@ static int txx9wdt_ioctl(struct inode *inode, struct file *file,
 	};
 
 	switch (cmd) {
-	default:
-		return -ENOTTY;
 	case WDIOC_GETSUPPORT:
 		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
 	case WDIOC_GETSTATUS:
@@ -156,6 +161,8 @@ static int txx9wdt_ioctl(struct inode *inode, struct file *file,
 		/* Fall */
 	case WDIOC_GETTIMEOUT:
 		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -168,22 +175,22 @@ static int txx9wdt_notify_sys(struct notifier_block *this, unsigned long code,
 }
 
 static const struct file_operations txx9wdt_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.write =	txx9wdt_write,
-	.ioctl =	txx9wdt_ioctl,
-	.open =		txx9wdt_open,
-	.release =	txx9wdt_release,
+	.owner		=	THIS_MODULE,
+	.llseek		=	no_llseek,
+	.write		=	txx9wdt_write,
+	.unlocked_ioctl =	txx9wdt_ioctl,
+	.open		=	txx9wdt_open,
+	.release	=	txx9wdt_release,
 };
 
 static struct miscdevice txx9wdt_miscdev = {
-	.minor =	WATCHDOG_MINOR,
-	.name =		"watchdog",
-	.fops =		&txx9wdt_fops,
+	.minor	=	WATCHDOG_MINOR,
+	.name	=	"watchdog",
+	.fops	=	&txx9wdt_fops,
 };
 
 static struct notifier_block txx9wdt_notifier = {
-	.notifier_call = txx9wdt_notify_sys
+	.notifier_call = txx9wdt_notify_sys,
 };
 
 static int __init txx9wdt_probe(struct platform_device *dev)
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 386492821fc..69396adaa5c 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -37,9 +37,9 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define WATCHDOG_NAME "w83627hf/thf/hg WDT"
@@ -57,22 +57,26 @@ MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
 
 static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Kernel methods.
  */
 
 #define WDT_EFER (wdt_io+0)   /* Extended Function Enable Registers */
-#define WDT_EFIR (wdt_io+0)   /* Extended Function Index Register (same as EFER) */
+#define WDT_EFIR (wdt_io+0)   /* Extended Function Index Register
+							(same as EFER) */
 #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
 
-static void
-w83627hf_select_wd_register(void)
+static void w83627hf_select_wd_register(void)
 {
 	unsigned char c;
 	outb_p(0x87, WDT_EFER); /* Enter extended function mode */
@@ -93,43 +97,45 @@ w83627hf_select_wd_register(void)
 	outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
 }
 
-static void
-w83627hf_unselect_wd_register(void)
+static void w83627hf_unselect_wd_register(void)
 {
 	outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
 }
 
 /* tyan motherboards seem to set F5 to 0x4C ?
  * So explicitly init to appropriate value. */
-static void
-w83627hf_init(void)
+
+static void w83627hf_init(void)
 {
 	unsigned char t;
 
 	w83627hf_select_wd_register();
 
 	outb_p(0xF6, WDT_EFER); /* Select CRF6 */
-	t=inb_p(WDT_EFDR);      /* read CRF6 */
+	t = inb_p(WDT_EFDR);      /* read CRF6 */
 	if (t != 0) {
-		printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout);
+		printk(KERN_INFO PFX
+		     "Watchdog already running. Resetting timeout to %d sec\n",
+								timeout);
 		outb_p(timeout, WDT_EFDR);    /* Write back to CRF6 */
 	}
 
 	outb_p(0xF5, WDT_EFER); /* Select CRF5 */
-	t=inb_p(WDT_EFDR);      /* read CRF5 */
-	t&=~0x0C;               /* set second mode & disable keyboard turning off watchdog */
+	t = inb_p(WDT_EFDR);      /* read CRF5 */
+	t &= ~0x0C;               /* set second mode & disable keyboard
+				    turning off watchdog */
 	outb_p(t, WDT_EFDR);    /* Write back to CRF5 */
 
 	outb_p(0xF7, WDT_EFER); /* Select CRF7 */
-	t=inb_p(WDT_EFDR);      /* read CRF7 */
-	t&=~0xC0;               /* disable keyboard & mouse turning off watchdog */
+	t = inb_p(WDT_EFDR);      /* read CRF7 */
+	t &= ~0xC0;               /* disable keyboard & mouse turning off
+				    watchdog */
 	outb_p(t, WDT_EFDR);    /* Write back to CRF7 */
 
 	w83627hf_unselect_wd_register();
 }
 
-static void
-wdt_ctrl(int timeout)
+static void wdt_ctrl(int timeout)
 {
 	spin_lock(&io_lock);
 
@@ -143,32 +149,28 @@ wdt_ctrl(int timeout)
 	spin_unlock(&io_lock);
 }
 
-static int
-wdt_ping(void)
+static int wdt_ping(void)
 {
 	wdt_ctrl(timeout);
 	return 0;
 }
 
-static int
-wdt_disable(void)
+static int wdt_disable(void)
 {
 	wdt_ctrl(0);
 	return 0;
 }
 
-static int
-wdt_set_heartbeat(int t)
+static int wdt_set_heartbeat(int t)
 {
-	if ((t < 1) || (t > 255))
+	if (t < 1 || t > 255)
 		return -EINVAL;
-
 	timeout = t;
 	return 0;
 }
 
-static ssize_t
-wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -178,7 +180,7 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 
 			for (i = 0; i != count; i++) {
 				char c;
-				if (get_user(c, buf+i))
+				if (get_user(c, buf + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -189,72 +191,61 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	return count;
 }
 
-static int
-wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_timeout;
 	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "W83627HF WDT",
 	};
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-	  if (copy_to_user(argp, &ident, sizeof(ident)))
-	    return -EFAULT;
-	  break;
-
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-	  return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-	  wdt_ping();
-	  break;
-
-	case WDIOC_SETTIMEOUT:
-	  if (get_user(new_timeout, p))
-		  return -EFAULT;
-	  if (wdt_set_heartbeat(new_timeout))
-		  return -EINVAL;
-	  wdt_ping();
-	  /* Fall */
-
-	case WDIOC_GETTIMEOUT:
-	  return put_user(timeout, p);
-
+		return put_user(0, p);
 	case WDIOC_SETOPTIONS:
 	{
-	  int options, retval = -EINVAL;
-
-	  if (get_user(options, p))
-	    return -EFAULT;
-
-	  if (options & WDIOS_DISABLECARD) {
-	    wdt_disable();
-	    retval = 0;
-	  }
-
-	  if (options & WDIOS_ENABLECARD) {
-	    wdt_ping();
-	    retval = 0;
-	  }
+		int options, retval = -EINVAL;
 
-	  return retval;
+		if (get_user(options, p))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			wdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			wdt_ping();
+			retval = 0;
+		}
+		return retval;
 	}
-
+	case WDIOC_KEEPALIVE:
+		wdt_ping();
+		break;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (wdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+		wdt_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
 	default:
-	  return -ENOTTY;
+		return -ENOTTY;
 	}
 	return 0;
 }
 
-static int
-wdt_open(struct inode *inode, struct file *file)
+static int wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
@@ -266,13 +257,13 @@ wdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int
-wdt_close(struct inode *inode, struct file *file)
+static int wdt_close(struct inode *inode, struct file *file)
 {
-	if (expect_close == 42) {
+	if (expect_close == 42)
 		wdt_disable();
-	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		wdt_ping();
 	}
 	expect_close = 0;
@@ -284,14 +275,12 @@ wdt_close(struct inode *inode, struct file *file)
  *	Notifier for system down
  */
 
-static int
-wdt_notify_sys(struct notifier_block *this, unsigned long code,
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT) {
-		/* Turn the WDT off */
-		wdt_disable();
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_disable();	/* Turn the WDT off */
+
 	return NOTIFY_DONE;
 }
 
@@ -303,7 +292,7 @@ static const struct file_operations wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdt_write,
-	.ioctl		= wdt_ioctl,
+	.unlocked_ioctl	= wdt_ioctl,
 	.open		= wdt_open,
 	.release	= wdt_close,
 };
@@ -323,8 +312,7 @@ static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
-static int __init
-wdt_init(void)
+static int __init wdt_init(void)
 {
 	int ret;
 
@@ -332,12 +320,13 @@ wdt_init(void)
 
 	if (wdt_set_heartbeat(timeout)) {
 		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
-		printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
-			WATCHDOG_TIMEOUT);
+		printk(KERN_INFO PFX
+		     "timeout value must be 1 <= timeout <= 255, using %d\n",
+				WATCHDOG_TIMEOUT);
 	}
 
 	if (!request_region(wdt_io, 1, WATCHDOG_NAME)) {
-		printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			wdt_io);
 		ret = -EIO;
 		goto out;
@@ -347,20 +336,22 @@ wdt_init(void)
 
 	ret = register_reboot_notifier(&wdt_notifier);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		goto unreg_regions;
 	}
 
 	ret = misc_register(&wdt_miscdev);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto unreg_reboot;
 	}
 
-	printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
-		timeout, nowayout);
+	printk(KERN_INFO PFX
+			"initialized. timeout=%d sec (nowayout=%d)\n",
+							timeout, nowayout);
 
 out:
 	return ret;
@@ -371,12 +362,11 @@ unreg_regions:
 	goto out;
 }
 
-static void __exit
-wdt_exit(void)
+static void __exit wdt_exit(void)
 {
 	misc_deregister(&wdt_miscdev);
 	unregister_reboot_notifier(&wdt_notifier);
-	release_region(wdt_io,1);
+	release_region(wdt_io, 1);
 }
 
 module_init(wdt_init);
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index 528b882420b..445d30a01ed 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -36,9 +36,9 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define WATCHDOG_NAME "w83697hf/hg WDT"
@@ -53,37 +53,43 @@ static DEFINE_SPINLOCK(io_lock);
 /* You must set this - there is no sane way to probe for this board. */
 static int wdt_io = 0x2e;
 module_param(wdt_io, int, 0);
-MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)");
+MODULE_PARM_DESC(wdt_io,
+		"w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)");
 
 static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 1<= timeout <=255 (default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static int early_disable = WATCHDOG_EARLY_DISABLE;
 module_param(early_disable, int, 0);
-MODULE_PARM_DESC(early_disable, "Watchdog gets disabled at boot time (default=" __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")");
+MODULE_PARM_DESC(early_disable,
+	"Watchdog gets disabled at boot time (default="
+				__MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")");
 
 /*
  *	Kernel methods.
  */
 
-#define W83697HF_EFER (wdt_io+0)	/* Extended Function Enable Register */
-#define W83697HF_EFIR (wdt_io+0)	/* Extended Function Index Register (same as EFER) */
-#define W83697HF_EFDR (wdt_io+1)	/* Extended Function Data Register */
+#define W83697HF_EFER (wdt_io + 0)  /* Extended Function Enable Register */
+#define W83697HF_EFIR (wdt_io + 0)  /* Extended Function Index Register
+							(same as EFER) */
+#define W83697HF_EFDR (wdt_io + 1)  /* Extended Function Data Register */
 
-static inline void
-w83697hf_unlock(void)
+static inline void w83697hf_unlock(void)
 {
 	outb_p(0x87, W83697HF_EFER);	/* Enter extended function mode */
 	outb_p(0x87, W83697HF_EFER);	/* Again according to manual */
 }
 
-static inline void
-w83697hf_lock(void)
+static inline void w83697hf_lock(void)
 {
 	outb_p(0xAA, W83697HF_EFER);	/* Leave extended function mode */
 }
@@ -93,41 +99,36 @@ w83697hf_lock(void)
  *	w83697hf_write_timeout() must be called with the device unlocked.
  */
 
-static unsigned char
-w83697hf_get_reg(unsigned char reg)
+static unsigned char w83697hf_get_reg(unsigned char reg)
 {
 	outb_p(reg, W83697HF_EFIR);
 	return inb_p(W83697HF_EFDR);
 }
 
-static void
-w83697hf_set_reg(unsigned char reg, unsigned char data)
+static void w83697hf_set_reg(unsigned char reg, unsigned char data)
 {
 	outb_p(reg, W83697HF_EFIR);
 	outb_p(data, W83697HF_EFDR);
 }
 
-static void
-w83697hf_write_timeout(int timeout)
+static void w83697hf_write_timeout(int timeout)
 {
-	w83697hf_set_reg(0xF4, timeout);	/* Write Timeout counter to CRF4 */
+	/* Write Timeout counter to CRF4 */
+	w83697hf_set_reg(0xF4, timeout);
 }
 
-static void
-w83697hf_select_wdt(void)
+static void w83697hf_select_wdt(void)
 {
 	w83697hf_unlock();
 	w83697hf_set_reg(0x07, 0x08);	/* Switch to logic device 8 (GPIO2) */
 }
 
-static inline void
-w83697hf_deselect_wdt(void)
+static inline void w83697hf_deselect_wdt(void)
 {
 	w83697hf_lock();
 }
 
-static void
-w83697hf_init(void)
+static void w83697hf_init(void)
 {
 	unsigned char bbuf;
 
@@ -136,7 +137,9 @@ w83697hf_init(void)
 	bbuf = w83697hf_get_reg(0x29);
 	bbuf &= ~0x60;
 	bbuf |= 0x20;
-	w83697hf_set_reg(0x29, bbuf);	/* Set pin 119 to WDTO# mode (= CR29, WDT0) */
+
+	/* Set pin 119 to WDTO# mode (= CR29, WDT0) */
+	w83697hf_set_reg(0x29, bbuf);
 
 	bbuf = w83697hf_get_reg(0xF3);
 	bbuf &= ~0x04;
@@ -145,8 +148,7 @@ w83697hf_init(void)
 	w83697hf_deselect_wdt();
 }
 
-static void
-wdt_ping(void)
+static void wdt_ping(void)
 {
 	spin_lock(&io_lock);
 	w83697hf_select_wdt();
@@ -157,8 +159,7 @@ wdt_ping(void)
 	spin_unlock(&io_lock);
 }
 
-static void
-wdt_enable(void)
+static void wdt_enable(void)
 {
 	spin_lock(&io_lock);
 	w83697hf_select_wdt();
@@ -170,8 +171,7 @@ wdt_enable(void)
 	spin_unlock(&io_lock);
 }
 
-static void
-wdt_disable(void)
+static void wdt_disable(void)
 {
 	spin_lock(&io_lock);
 	w83697hf_select_wdt();
@@ -183,8 +183,7 @@ wdt_disable(void)
 	spin_unlock(&io_lock);
 }
 
-static unsigned char
-wdt_running(void)
+static unsigned char wdt_running(void)
 {
 	unsigned char t;
 
@@ -199,18 +198,17 @@ wdt_running(void)
 	return t;
 }
 
-static int
-wdt_set_heartbeat(int t)
+static int wdt_set_heartbeat(int t)
 {
-	if ((t < 1) || (t > 255))
+	if (t < 1 || t > 255)
 		return -EINVAL;
 
 	timeout = t;
 	return 0;
 }
 
-static ssize_t
-wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -220,7 +218,7 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 
 			for (i = 0; i != count; i++) {
 				char c;
-				if (get_user(c, buf+i))
+				if (get_user(c, buf + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -231,15 +229,14 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	return count;
 }
 
-static int
-wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_timeout;
-	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "W83697HF WDT",
 	};
@@ -254,21 +251,6 @@ wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);
 
-	case WDIOC_KEEPALIVE:
-		wdt_ping();
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_timeout, p))
-			return -EFAULT;
-		if (wdt_set_heartbeat(new_timeout))
-			return -EINVAL;
-		wdt_ping();
-		/* Fall */
-
-	case WDIOC_GETTIMEOUT:
-		return put_user(timeout, p);
-
 	case WDIOC_SETOPTIONS:
 	{
 		int options, retval = -EINVAL;
@@ -289,14 +271,28 @@ wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		return retval;
 	}
 
+	case WDIOC_KEEPALIVE:
+		wdt_ping();
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (wdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+		wdt_ping();
+		/* Fall */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
 	default:
 		return -ENOTTY;
 	}
 	return 0;
 }
 
-static int
-wdt_open(struct inode *inode, struct file *file)
+static int wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
@@ -308,13 +304,13 @@ wdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int
-wdt_close(struct inode *inode, struct file *file)
+static int wdt_close(struct inode *inode, struct file *file)
 {
-	if (expect_close == 42) {
+	if (expect_close == 42)
 		wdt_disable();
-	} else {
-		printk (KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+	else {
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 		wdt_ping();
 	}
 	expect_close = 0;
@@ -326,14 +322,12 @@ wdt_close(struct inode *inode, struct file *file)
  *	Notifier for system down
  */
 
-static int
-wdt_notify_sys(struct notifier_block *this, unsigned long code,
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT) {
-		/* Turn the WDT off */
-		wdt_disable();
-	}
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_disable();	/* Turn the WDT off */
+
 	return NOTIFY_DONE;
 }
 
@@ -345,7 +339,7 @@ static const struct file_operations wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdt_write,
-	.ioctl		= wdt_ioctl,
+	.unlocked_ioctl	= wdt_ioctl,
 	.open		= wdt_open,
 	.release	= wdt_close,
 };
@@ -365,36 +359,38 @@ static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
-static int
-w83697hf_check_wdt(void)
+static int w83697hf_check_wdt(void)
 {
 	if (!request_region(wdt_io, 2, WATCHDOG_NAME)) {
-		printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io);
+		printk(KERN_ERR PFX
+			"I/O address 0x%x already in use\n", wdt_io);
 		return -EIO;
 	}
 
-	printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io);
+	printk(KERN_DEBUG PFX
+			"Looking for watchdog at address 0x%x\n", wdt_io);
 	w83697hf_unlock();
 	if (w83697hf_get_reg(0x20) == 0x60) {
-		printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io);
+		printk(KERN_INFO PFX
+			"watchdog found at address 0x%x\n", wdt_io);
 		w83697hf_lock();
 		return 0;
 	}
-	w83697hf_lock();	/* Reprotect in case it was a compatible device */
+	/* Reprotect in case it was a compatible device */
+	w83697hf_lock();
 
-	printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io);
+	printk(KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io);
 	release_region(wdt_io, 2);
 	return -EIO;
 }
 
 static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 };
 
-static int __init
-wdt_init(void)
+static int __init wdt_init(void)
 {
 	int ret, i, found = 0;
 
-	printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
+	printk(KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
 
 	if (wdt_io == 0) {
 		/* we will autodetect the W83697HF/HG watchdog */
@@ -409,7 +405,7 @@ wdt_init(void)
 	}
 
 	if (!found) {
-		printk (KERN_ERR PFX "No W83697HF/HG could be found\n");
+		printk(KERN_ERR PFX "No W83697HF/HG could be found\n");
 		ret = -EIO;
 		goto out;
 	}
@@ -417,31 +413,33 @@ wdt_init(void)
 	w83697hf_init();
 	if (early_disable) {
 		if (wdt_running())
-			printk (KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n");
+			printk(KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n");
 		wdt_disable();
 	}
 
 	if (wdt_set_heartbeat(timeout)) {
 		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
-		printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
-			WATCHDOG_TIMEOUT);
+		printk(KERN_INFO PFX
+		     "timeout value must be 1 <= timeout <= 255, using %d\n",
+							WATCHDOG_TIMEOUT);
 	}
 
 	ret = register_reboot_notifier(&wdt_notifier);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		goto unreg_regions;
 	}
 
 	ret = misc_register(&wdt_miscdev);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						WATCHDOG_MINOR, ret);
 		goto unreg_reboot;
 	}
 
-	printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
+	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
 
 out:
@@ -453,8 +451,7 @@ unreg_regions:
 	goto out;
 }
 
-static void __exit
-wdt_exit(void)
+static void __exit wdt_exit(void)
 {
 	misc_deregister(&wdt_miscdev);
 	unregister_reboot_notifier(&wdt_notifier);
diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c
index f510a3a595e..24587d2060c 100644
--- a/drivers/watchdog/w83877f_wdt.c
+++ b/drivers/watchdog/w83877f_wdt.c
@@ -23,13 +23,16 @@
  *                            Added KERN_* tags to printks
  *                            add CONFIG_WATCHDOG_NOWAYOUT support
  *                            fix possible wdt_is_open race
- *                            changed watchdog_info to correctly reflect what the driver offers
- *                            added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, WDIOC_SETTIMEOUT,
+ *                            changed watchdog_info to correctly reflect what
+ *			      the driver offers
+ *                            added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS,
+ *			      WDIOC_SETTIMEOUT,
  *                            WDIOC_GETTIMEOUT, and WDIOC_SETOPTIONS ioctls
  *           09/8 - 2003      [wim@iguana.be] cleanup of trailing spaces
  *                            added extra printk's for startup problems
  *                            use module_param
- *                            made timeout (the emulated heartbeat) a module_param
+ *                            made timeout (the emulated heartbeat) a
+ *			      module_param
  *                            made the keepalive ping an internal subroutine
  *
  *  This WDT driver is different from most other Linux WDT
@@ -51,8 +54,8 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <asm/system.h>
 
 #define OUR_NAME "w83877f_wdt"
@@ -80,14 +83,19 @@
  */
 
 #define WATCHDOG_TIMEOUT 30            /* 30 sec default timeout */
-static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static void wdt_timer_ping(unsigned long);
 static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0);
@@ -105,8 +113,7 @@ static void wdt_timer_ping(unsigned long data)
 	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
 	 * we agree to ping the WDT
 	 */
-	if(time_before(jiffies, next_heartbeat))
-	{
+	if (time_before(jiffies, next_heartbeat)) {
 		/* Ping the WDT */
 		spin_lock(&wdt_spinlock);
 
@@ -118,9 +125,9 @@ static void wdt_timer_ping(unsigned long data)
 
 		spin_unlock(&wdt_spinlock);
 
-	} else {
-		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
-	}
+	} else
+		printk(KERN_WARNING PFX
+			"Heartbeat lost! Will not ping the watchdog\n");
 }
 
 /*
@@ -181,22 +188,21 @@ static void wdt_keepalive(void)
  * /dev/watchdog handling
  */
 
-static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos)
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count)
-	{
-		if (!nowayout)
-		{
+	if (count) {
+		if (!nowayout) {
 			size_t ofs;
 
-			/* note: just in case someone wrote the magic character
-			 * five months ago... */
+			/* note: just in case someone wrote the magic
+			   character five months ago... */
 			wdt_expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
-			for(ofs = 0; ofs != count; ofs++)
-			{
+			/* scan to see whether or not we got the
+			   magic character */
+			for (ofs = 0; ofs != count; ofs++) {
 				char c;
 				if (get_user(c, buf + ofs))
 					return -EFAULT;
@@ -211,10 +217,10 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou
 	return count;
 }
 
-static int fop_open(struct inode * inode, struct file * file)
+static int fop_open(struct inode *inode, struct file *file)
 {
 	/* Just in case we're already talking to someone... */
-	if(test_and_set_bit(0, &wdt_is_open))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 
 	/* Good, fire up the show */
@@ -222,78 +228,78 @@ static int fop_open(struct inode * inode, struct file * file)
 	return nonseekable_open(inode, file);
 }
 
-static int fop_close(struct inode * inode, struct file * file)
+static int fop_close(struct inode *inode, struct file *file)
 {
-	if(wdt_expect_close == 42)
+	if (wdt_expect_close == 42)
 		wdt_turnoff();
 	else {
 		del_timer(&timer);
-		printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n");
+		printk(KERN_CRIT PFX
+		  "device file closed unexpectedly. Will not stop the WDT!\n");
 	}
 	clear_bit(0, &wdt_is_open);
 	wdt_expect_close = 0;
 	return 0;
 }
 
-static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident=
-	{
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "W83877F",
 	};
 
-	switch(cmd)
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
 	{
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdt_keepalive();
-			return 0;
-		case WDIOC_SETOPTIONS:
-		{
-			int new_options, retval = -EINVAL;
-
-			if(get_user(new_options, p))
-				return -EFAULT;
-
-			if(new_options & WDIOS_DISABLECARD) {
-				wdt_turnoff();
-				retval = 0;
-			}
+		int new_options, retval = -EINVAL;
 
-			if(new_options & WDIOS_ENABLECARD) {
-				wdt_startup();
-				retval = 0;
-			}
+		if (get_user(new_options, p))
+			return -EFAULT;
 
-			return retval;
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
 		}
-		case WDIOC_SETTIMEOUT:
-		{
-			int new_timeout;
 
-			if(get_user(new_timeout, p))
-				return -EFAULT;
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
+		}
 
-			if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */
-				return -EINVAL;
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
 
-			timeout = new_timeout;
-			wdt_keepalive();
-			/* Fall through */
-		}
-		case WDIOC_GETTIMEOUT:
-			return put_user(timeout, p);
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+
+		/* arbitrary upper limit */
+		if (new_timeout < 1 || new_timeout > 3600)
+			return -EINVAL;
+
+		timeout = new_timeout;
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -303,7 +309,7 @@ static const struct file_operations wdt_fops = {
 	.write		= fop_write,
 	.open		= fop_open,
 	.release	= fop_close,
-	.ioctl		= fop_ioctl,
+	.unlocked_ioctl	= fop_ioctl,
 };
 
 static struct miscdevice wdt_miscdev = {
@@ -319,7 +325,7 @@ static struct miscdevice wdt_miscdev = {
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_turnoff();
 	return NOTIFY_DONE;
 }
@@ -329,8 +335,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
  *	turn the timebomb registers off.
  */
 
-static struct notifier_block wdt_notifier=
-{
+static struct notifier_block wdt_notifier = {
 	.notifier_call = wdt_notify_sys,
 };
 
@@ -342,31 +347,29 @@ static void __exit w83877f_wdt_unload(void)
 	misc_deregister(&wdt_miscdev);
 
 	unregister_reboot_notifier(&wdt_notifier);
-	release_region(WDT_PING,1);
-	release_region(ENABLE_W83877F_PORT,2);
+	release_region(WDT_PING, 1);
+	release_region(ENABLE_W83877F_PORT, 2);
 }
 
 static int __init w83877f_wdt_init(void)
 {
 	int rc = -EBUSY;
 
-	if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
-	{
+	if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */
 		timeout = WATCHDOG_TIMEOUT;
-		printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n",
-			timeout);
+		printk(KERN_INFO PFX
+			"timeout value must be 1 <= x <= 3600, using %d\n",
+							timeout);
 	}
 
-	if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT"))
-	{
+	if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT")) {
 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			ENABLE_W83877F_PORT);
 		rc = -EIO;
 		goto err_out;
 	}
 
-	if (!request_region(WDT_PING, 1, "W8387FF WDT"))
-	{
+	if (!request_region(WDT_PING, 1, "W8387FF WDT")) {
 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			WDT_PING);
 		rc = -EIO;
@@ -374,22 +377,22 @@ static int __init w83877f_wdt_init(void)
 	}
 
 	rc = register_reboot_notifier(&wdt_notifier);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out_region2;
 	}
 
 	rc = misc_register(&wdt_miscdev);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			wdt_miscdev.minor, rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+							wdt_miscdev.minor, rc);
 		goto err_out_reboot;
 	}
 
-	printk(KERN_INFO PFX "WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n",
+	printk(KERN_INFO PFX
+	  "WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
 
 	return 0;
@@ -397,9 +400,9 @@ static int __init w83877f_wdt_init(void)
 err_out_reboot:
 	unregister_reboot_notifier(&wdt_notifier);
 err_out_region2:
-	release_region(WDT_PING,1);
+	release_region(WDT_PING, 1);
 err_out_region1:
-	release_region(ENABLE_W83877F_PORT,2);
+	release_region(ENABLE_W83877F_PORT, 2);
 err_out:
 	return rc;
 }
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
index b209bcd7f78..2525da5080c 100644
--- a/drivers/watchdog/w83977f_wdt.c
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -26,10 +26,10 @@
 #include <linux/watchdog.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/system.h>
-#include <asm/uaccess.h>
 
 #define WATCHDOG_VERSION  "1.00"
 #define WATCHDOG_NAME     "W83977F WDT"
@@ -53,13 +53,17 @@ static	char expect_close;
 static	DEFINE_SPINLOCK(spinlock);
 
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds (15..7635), default="
+				__MODULE_STRING(DEFAULT_TIMEOUT) ")");
 module_param(testmode, int, 0);
-MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0");
+MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * Start the watchdog
@@ -72,8 +76,8 @@ static int wdt_start(void)
 	spin_lock_irqsave(&spinlock, flags);
 
 	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
 
 	/*
 	 * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
@@ -81,50 +85,49 @@ static int wdt_start(void)
 	 * F3 is set to enable watchdog LED blink at timeout.
 	 * F4 is used to just clear the TIMEOUT'ed state (bit 0).
 	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(timeoutW,IO_DATA_PORT);
-	outb_p(0xF3,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF4,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(timeoutW, IO_DATA_PORT);
+	outb_p(0xF3, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
 
 	/* Set device Aux2 active */
-	outb_p(0x30,IO_INDEX_PORT);
-	outb_p(0x01,IO_DATA_PORT);
+	outb_p(0x30, IO_INDEX_PORT);
+	outb_p(0x01, IO_DATA_PORT);
 
-	/* 
+	/*
 	 * Select device Aux1 (dev=7) to set GP16 as the watchdog output
 	 * (in reg E6) and GP13 as the watchdog LED output (in reg E3).
 	 * Map GP16 at pin 119.
 	 * In test mode watch the bit 0 on F4 to indicate "triggered" or
 	 * check watchdog LED on SBC.
 	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x07,IO_DATA_PORT);
-	if (!testmode)
-	{
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x07, IO_DATA_PORT);
+	if (!testmode) {
 		unsigned pin_map;
 
-		outb_p(0xE6,IO_INDEX_PORT);
-		outb_p(0x0A,IO_DATA_PORT);
-		outb_p(0x2C,IO_INDEX_PORT);
+		outb_p(0xE6, IO_INDEX_PORT);
+		outb_p(0x0A, IO_DATA_PORT);
+		outb_p(0x2C, IO_INDEX_PORT);
 		pin_map = inb_p(IO_DATA_PORT);
 		pin_map |= 0x10;
 		pin_map &= ~(0x20);
-		outb_p(0x2C,IO_INDEX_PORT);
-		outb_p(pin_map,IO_DATA_PORT);
+		outb_p(0x2C, IO_INDEX_PORT);
+		outb_p(pin_map, IO_DATA_PORT);
 	}
-	outb_p(0xE3,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
+	outb_p(0xE3, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
 
 	/* Set device Aux1 active */
-	outb_p(0x30,IO_INDEX_PORT);
-	outb_p(0x01,IO_DATA_PORT);
+	outb_p(0x30, IO_INDEX_PORT);
+	outb_p(0x01, IO_DATA_PORT);
 
 	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
 
 	spin_unlock_irqrestore(&spinlock, flags);
 
@@ -144,42 +147,41 @@ static int wdt_stop(void)
 	spin_lock_irqsave(&spinlock, flags);
 
 	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
 
-	/* 
+	/*
 	 * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
 	 * F2 is reset to its default value (watchdog timer disabled).
 	 * F3 is reset to its default state.
 	 * F4 clears the TIMEOUT'ed state (bit 0) - back to default.
 	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(0xFF,IO_DATA_PORT);
-	outb_p(0xF3,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
-	outb_p(0xF4,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(0xFF, IO_DATA_PORT);
+	outb_p(0xF3, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
 
 	/*
-	 * Select device Aux1 (dev=7) to set GP16 (in reg E6) and 
+	 * Select device Aux1 (dev=7) to set GP16 (in reg E6) and
 	 * Gp13 (in reg E3) as inputs.
 	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x07,IO_DATA_PORT);
-	if (!testmode)
-	{
-		outb_p(0xE6,IO_INDEX_PORT);
-		outb_p(0x01,IO_DATA_PORT);
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x07, IO_DATA_PORT);
+	if (!testmode) {
+		outb_p(0xE6, IO_INDEX_PORT);
+		outb_p(0x01, IO_DATA_PORT);
 	}
-	outb_p(0xE3,IO_INDEX_PORT);
-	outb_p(0x01,IO_DATA_PORT);
+	outb_p(0xE3, IO_INDEX_PORT);
+	outb_p(0x01, IO_DATA_PORT);
 
 	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
 
 	spin_unlock_irqrestore(&spinlock, flags);
 
@@ -200,17 +202,17 @@ static int wdt_keepalive(void)
 	spin_lock_irqsave(&spinlock, flags);
 
 	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
 
 	/* Select device Aux2 (device=8) to kick watchdog reg F2 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(timeoutW,IO_DATA_PORT);
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(timeoutW, IO_DATA_PORT);
 
 	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
 
 	spin_unlock_irqrestore(&spinlock, flags);
 
@@ -227,7 +229,7 @@ static int wdt_set_timeout(int t)
 
 	/*
 	 * Convert seconds to watchdog counter time units, rounding up.
-	 * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup 
+	 * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup
 	 * value. This information is supplied in the PCM-5335 manual and was
 	 * checked by me on a real board. This is a bit strange because W83977f
 	 * datasheet says counter unit is in minutes!
@@ -241,7 +243,7 @@ static int wdt_set_timeout(int t)
 		return -EINVAL;
 
 	/*
-	 * timeout is the timeout in seconds, 
+	 * timeout is the timeout in seconds,
 	 * timeoutW is the timeout in watchdog counter units.
 	 */
 	timeoutW = tmrval;
@@ -261,17 +263,17 @@ static int wdt_get_status(int *status)
 	spin_lock_irqsave(&spinlock, flags);
 
 	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
 
 	/* Select device Aux2 (device=8) to read watchdog reg F4 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF4,IO_INDEX_PORT);
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
 	new_status = inb_p(IO_DATA_PORT);
 
 	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
 
 	spin_unlock_irqrestore(&spinlock, flags);
 
@@ -290,7 +292,7 @@ static int wdt_get_status(int *status)
 static int wdt_open(struct inode *inode, struct file *file)
 {
 	/* If the watchdog is alive we don't need to start it again */
-	if( test_and_set_bit(0, &timer_alive) )
+	if (test_and_set_bit(0, &timer_alive))
 		return -EBUSY;
 
 	if (nowayout)
@@ -306,13 +308,13 @@ static int wdt_release(struct inode *inode, struct file *file)
 	 * Shut off the timer.
 	 * Lock it in if it's a module and we set nowayout
 	 */
-	if (expect_close == 42)
-	{
+	if (expect_close == 42) {
 		wdt_stop();
 		clear_bit(0, &timer_alive);
 	} else {
 		wdt_keepalive();
-		printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+			"unexpected close, not stopping watchdog!\n");
 	}
 	expect_close = 0;
 	return 0;
@@ -333,24 +335,22 @@ static ssize_t wdt_write(struct file *file, const char __user *buf,
 			    size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
-	if(count)
-	{
-		if (!nowayout)
-		{
+	if (count) {
+		if (!nowayout) {
 			size_t ofs;
 
-			/* note: just in case someone wrote the magic character long ago */
+			/* note: just in case someone wrote the
+			   magic character long ago */
 			expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
-			for(ofs = 0; ofs != count; ofs++)
-			{
+			/* scan to see whether or not we got the
+			   magic character */
+			for (ofs = 0; ofs != count; ofs++) {
 				char c;
 				if (get_user(c, buf + ofs))
 					return -EFAULT;
-				if (c == 'V') {
+				if (c == 'V')
 					expect_close = 42;
-				}
 			}
 		}
 
@@ -377,8 +377,7 @@ static struct watchdog_info ident = {
 	.identity = WATCHDOG_NAME,
 };
 
-static int wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int status;
 	int new_options, retval = -EINVAL;
@@ -390,13 +389,10 @@ static int wdt_ioctl(struct inode *inode, struct file *file,
 
 	uarg.i = (int __user *)arg;
 
-	switch(cmd)
-	{
-	default:
-		return -ENOTTY;
-
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0;
+		return copy_to_user(uarg.ident, &ident,
+						sizeof(ident)) ? -EFAULT : 0;
 
 	case WDIOC_GETSTATUS:
 		wdt_get_status(&status);
@@ -405,12 +401,8 @@ static int wdt_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, uarg.i);
 
-	case WDIOC_KEEPALIVE:
-		wdt_keepalive();
-		return 0;
-
 	case WDIOC_SETOPTIONS:
-		if (get_user (new_options, uarg.i))
+		if (get_user(new_options, uarg.i))
 			return -EFAULT;
 
 		if (new_options & WDIOS_DISABLECARD) {
@@ -425,6 +417,10 @@ static int wdt_ioctl(struct inode *inode, struct file *file,
 
 		return retval;
 
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+
 	case WDIOC_SETTIMEOUT:
 		if (get_user(new_timeout, uarg.i))
 			return -EFAULT;
@@ -438,29 +434,30 @@ static int wdt_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETTIMEOUT:
 		return put_user(timeout, uarg.i);
 
+	default:
+		return -ENOTTY;
+
 	}
 }
 
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_stop();
 	return NOTIFY_DONE;
 }
 
-static const struct file_operations wdt_fops=
-{
+static const struct file_operations wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdt_write,
-	.ioctl		= wdt_ioctl,
+	.unlocked_ioctl	= wdt_ioctl,
 	.open		= wdt_open,
 	.release	= wdt_release,
 };
 
-static struct miscdevice wdt_miscdev=
-{
+static struct miscdevice wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &wdt_fops,
@@ -474,20 +471,20 @@ static int __init w83977f_wdt_init(void)
 {
 	int rc;
 
-        printk(KERN_INFO PFX DRIVER_VERSION);
+	printk(KERN_INFO PFX DRIVER_VERSION);
 
 	/*
-	 * Check that the timeout value is within it's range ; 
+	 * Check that the timeout value is within it's range;
 	 * if not reset to the default
 	 */
 	if (wdt_set_timeout(timeout)) {
 		wdt_set_timeout(DEFAULT_TIMEOUT);
-		printk(KERN_INFO PFX "timeout value must be 15<=timeout<=7635, using %d\n",
-			DEFAULT_TIMEOUT);
+		printk(KERN_INFO PFX
+		    "timeout value must be 15 <= timeout <= 7635, using %d\n",
+							DEFAULT_TIMEOUT);
 	}
 
-	if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME))
-	{
+	if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) {
 		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			IO_INDEX_PORT);
 		rc = -EIO;
@@ -495,30 +492,30 @@ static int __init w83977f_wdt_init(void)
 	}
 
 	rc = register_reboot_notifier(&wdt_notifier);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out_region;
 	}
 
 	rc = misc_register(&wdt_miscdev);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			wdt_miscdev.minor, rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						wdt_miscdev.minor, rc);
 		goto err_out_reboot;
 	}
 
-	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
-		timeout, nowayout, testmode);
+	printk(KERN_INFO PFX
+		"initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
+					timeout, nowayout, testmode);
 
 	return 0;
 
 err_out_reboot:
 	unregister_reboot_notifier(&wdt_notifier);
 err_out_region:
-	release_region(IO_INDEX_PORT,2);
+	release_region(IO_INDEX_PORT, 2);
 err_out:
 	return rc;
 }
@@ -528,7 +525,7 @@ static void __exit w83977f_wdt_exit(void)
 	wdt_stop();
 	misc_deregister(&wdt_miscdev);
 	unregister_reboot_notifier(&wdt_notifier);
-	release_region(IO_INDEX_PORT,2);
+	release_region(IO_INDEX_PORT, 2);
 }
 
 module_init(w83977f_wdt_init);
diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c
index 9e368091f79..68377ae171f 100644
--- a/drivers/watchdog/wafer5823wdt.c
+++ b/drivers/watchdog/wafer5823wdt.c
@@ -1,11 +1,11 @@
 /*
  *	ICP Wafer 5823 Single Board Computer WDT driver
- *      http://www.icpamerica.com/wafer_5823.php
- *      May also work on other similar models
+ *	http://www.icpamerica.com/wafer_5823.php
+ *	May also work on other similar models
  *
  *	(c) Copyright 2002 Justin Cormack <justin@street-vision.com>
  *
- *      Release 0.02
+ *	Release 0.02
  *
  *	Based on advantechwdt.c which is based on wdt.c.
  *	Original copyright messages:
@@ -36,8 +36,8 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 #define WATCHDOG_NAME "Wafer 5823 WDT"
 #define PFX WATCHDOG_NAME ": "
@@ -50,10 +50,10 @@ static DEFINE_SPINLOCK(wafwdt_lock);
 /*
  *	You must set these - there is no sane way to probe for this board.
  *
- *      To enable, write the timeout value in seconds (1 to 255) to I/O
- *      port WDT_START, then read the port to start the watchdog. To pat
- *      the dog, read port WDT_STOP to stop the timer, then read WDT_START
- *      to restart it again.
+ *	To enable, write the timeout value in seconds (1 to 255) to I/O
+ *	port WDT_START, then read the port to start the watchdog. To pat
+ *	the dog, read port WDT_STOP to stop the timer, then read WDT_START
+ *	to restart it again.
  */
 
 static int wdt_stop = 0x843;
@@ -61,11 +61,15 @@ static int wdt_start = 0x443;
 
 static int timeout = WD_TIMO;  /* in seconds */
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WD_TIMO) ".");
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
+				__MODULE_STRING(WD_TIMO) ".");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static void wafwdt_ping(void)
 {
@@ -83,14 +87,14 @@ static void wafwdt_start(void)
 	inb_p(wdt_start);
 }
 
-static void
-wafwdt_stop(void)
+static void wafwdt_stop(void)
 {
 	/* stop watchdog */
 	inb_p(wdt_stop);
 }
 
-static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos)
+static ssize_t wafwdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
 	if (count) {
@@ -100,7 +104,8 @@ static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t co
 			/* In case it was set long ago */
 			expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the magic
+			   character */
 			for (i = 0; i != count; i++) {
 				char c;
 				if (get_user(c, buf + i))
@@ -109,27 +114,29 @@ static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t co
 					expect_close = 42;
 			}
 		}
-		/* Well, anyhow someone wrote to us, we should return that favour */
+		/* Well, anyhow someone wrote to us, we should
+		   return that favour */
 		wafwdt_ping();
 	}
 	return count;
 }
 
-static int wafwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	     unsigned long arg)
+static long wafwdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "Wafer 5823 WDT",
 	};
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user(argp, &ident, sizeof (ident)))
+		if (copy_to_user(argp, &ident, sizeof(ident)))
 			return -EFAULT;
 		break;
 
@@ -137,22 +144,6 @@ static int wafwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);
 
-	case WDIOC_KEEPALIVE:
-		wafwdt_ping();
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_timeout, p))
-			return -EFAULT;
-		if ((new_timeout < 1) || (new_timeout > 255))
-			return -EINVAL;
-		timeout = new_timeout;
-		wafwdt_stop();
-		wafwdt_start();
-		/* Fall */
-	case WDIOC_GETTIMEOUT:
-		return put_user(timeout, p);
-
 	case WDIOC_SETOPTIONS:
 	{
 		int options, retval = -EINVAL;
@@ -173,6 +164,22 @@ static int wafwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 		return retval;
 	}
 
+	case WDIOC_KEEPALIVE:
+		wafwdt_ping();
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if ((new_timeout < 1) || (new_timeout > 255))
+			return -EINVAL;
+		timeout = new_timeout;
+		wafwdt_stop();
+		wafwdt_start();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
 	default:
 		return -ENOTTY;
 	}
@@ -191,13 +198,13 @@ static int wafwdt_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
-static int
-wafwdt_close(struct inode *inode, struct file *file)
+static int wafwdt_close(struct inode *inode, struct file *file)
 {
-	if (expect_close == 42) {
+	if (expect_close == 42)
 		wafwdt_stop();
-	} else {
-		printk(KERN_CRIT PFX "WDT device closed unexpectedly.  WDT will not stop!\n");
+	else {
+		printk(KERN_CRIT PFX
+		    "WDT device closed unexpectedly.  WDT will not stop!\n");
 		wafwdt_ping();
 	}
 	clear_bit(0, &wafwdt_is_open);
@@ -209,12 +216,11 @@ wafwdt_close(struct inode *inode, struct file *file)
  *	Notifier for system down
  */
 
-static int wafwdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int wafwdt_notify_sys(struct notifier_block *this, unsigned long code,
+								void *unused)
 {
-	if (code == SYS_DOWN || code == SYS_HALT) {
-		/* Turn the WDT off */
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wafwdt_stop();
-	}
 	return NOTIFY_DONE;
 }
 
@@ -226,7 +232,7 @@ static const struct file_operations wafwdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wafwdt_write,
-	.ioctl		= wafwdt_ioctl,
+	.unlocked_ioctl	= wafwdt_ioctl,
 	.open		= wafwdt_open,
 	.release	= wafwdt_close,
 };
@@ -250,25 +256,28 @@ static int __init wafwdt_init(void)
 {
 	int ret;
 
-	printk(KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n");
+	printk(KERN_INFO
+	  "WDT driver for Wafer 5823 single board computer initialising.\n");
 
 	if (timeout < 1 || timeout > 255) {
 		timeout = WD_TIMO;
-		printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n",
-			timeout);
+		printk(KERN_INFO PFX
+			"timeout value must be 1 <= x <= 255, using %d\n",
+								timeout);
 	}
 
 	if (wdt_stop != wdt_start) {
-		if(!request_region(wdt_stop, 1, "Wafer 5823 WDT")) {
-			printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
-			wdt_stop);
+		if (!request_region(wdt_stop, 1, "Wafer 5823 WDT")) {
+			printk(KERN_ERR PFX
+				"I/O address 0x%04x already in use\n",
+								wdt_stop);
 			ret = -EIO;
 			goto error;
 		}
 	}
 
-	if(!request_region(wdt_start, 1, "Wafer 5823 WDT")) {
-		printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+	if (!request_region(wdt_start, 1, "Wafer 5823 WDT")) {
+		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
 			wdt_start);
 		ret = -EIO;
 		goto error2;
@@ -276,19 +285,20 @@ static int __init wafwdt_init(void)
 
 	ret = register_reboot_notifier(&wafwdt_notifier);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		goto error3;
 	}
 
 	ret = misc_register(&wafwdt_miscdev);
 	if (ret != 0) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						WATCHDOG_MINOR, ret);
 		goto error4;
 	}
 
-	printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
+	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
 
 	return ret;
@@ -307,7 +317,7 @@ static void __exit wafwdt_exit(void)
 {
 	misc_deregister(&wafwdt_miscdev);
 	unregister_reboot_notifier(&wafwdt_notifier);
-	if(wdt_stop != wdt_start)
+	if (wdt_stop != wdt_start)
 		release_region(wdt_stop, 1);
 	release_region(wdt_start, 1);
 }
diff --git a/drivers/watchdog/wd501p.h b/drivers/watchdog/wd501p.h
index a4504f40394..db34853c28a 100644
--- a/drivers/watchdog/wd501p.h
+++ b/drivers/watchdog/wd501p.h
@@ -12,7 +12,7 @@
  *	http://www.cymru.net
  *
  *	This driver is provided under the GNU General Public License, incorporated
- *	herein by reference. The driver is provided without warranty or 
+ *	herein by reference. The driver is provided without warranty or
  *	support.
  *
  *	Release 0.04.
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index 1d64e277567..5d3b1a8e28b 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -35,9 +35,9 @@
 #include <linux/reboot.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
+#include <linux/uaccess.h>
 
 #include <asm/rtas.h>
-#include <asm/uaccess.h>
 
 #define WDRTAS_MAGIC_CHAR		42
 #define WDRTAS_SUPPORTED_MASK		(WDIOF_SETTIMEOUT | \
@@ -56,7 +56,7 @@ static int wdrtas_nowayout = 0;
 #endif
 
 static atomic_t wdrtas_miscdev_open = ATOMIC_INIT(0);
-static char wdrtas_expect_close = 0;
+static char wdrtas_expect_close;
 
 static int wdrtas_interval;
 
@@ -86,8 +86,8 @@ static char wdrtas_logbuffer[WDRTAS_LOGBUFFER_LEN];
  * RTAS function set-indicator (surveillance). The unit of interval is
  * seconds.
  */
-static int
-wdrtas_set_interval(int interval)
+
+static int wdrtas_set_interval(int interval)
 {
 	long result;
 	static int print_msg = 10;
@@ -97,7 +97,7 @@ wdrtas_set_interval(int interval)
 
 	result = rtas_call(wdrtas_token_set_indicator, 3, 1, NULL,
 			   WDRTAS_SURVEILLANCE_IND, 0, interval);
-	if ( (result < 0) && (print_msg) ) {
+	if (result < 0 && print_msg) {
 		printk(KERN_ERR "wdrtas: setting the watchdog to %i "
 		       "timeout failed: %li\n", interval, result);
 		print_msg--;
@@ -116,16 +116,14 @@ wdrtas_set_interval(int interval)
  * as reported by the RTAS function ibm,get-system-parameter. The unit
  * of the return value is seconds.
  */
-static int
-wdrtas_get_interval(int fallback_value)
+static int wdrtas_get_interval(int fallback_value)
 {
 	long result;
 	char value[4];
 
 	result = rtas_call(wdrtas_token_get_sp, 3, 1, NULL,
 			   WDRTAS_SP_SPI, (void *)__pa(&value), 4);
-	if ( (value[0] != 0) || (value[1] != 2) || (value[3] != 0) ||
-	     (result < 0) ) {
+	if (value[0] != 0 || value[1] != 2 || value[3] != 0 || result < 0) {
 		printk(KERN_WARNING "wdrtas: could not get sp_spi watchdog "
 		       "timeout (%li). Continuing\n", result);
 		return fallback_value;
@@ -141,8 +139,7 @@ wdrtas_get_interval(int fallback_value)
  * wdrtas_timer_start starts the watchdog by calling the RTAS function
  * set-interval (surveillance)
  */
-static void
-wdrtas_timer_start(void)
+static void wdrtas_timer_start(void)
 {
 	wdrtas_set_interval(wdrtas_interval);
 }
@@ -153,8 +150,7 @@ wdrtas_timer_start(void)
  * wdrtas_timer_stop stops the watchdog timer by calling the RTAS function
  * set-interval (surveillance)
  */
-static void
-wdrtas_timer_stop(void)
+static void wdrtas_timer_stop(void)
 {
 	wdrtas_set_interval(0);
 }
@@ -165,8 +161,7 @@ wdrtas_timer_stop(void)
  * wdrtas_log_scanned_event prints a message to the log buffer dumping
  * the results of the last event-scan call
  */
-static void
-wdrtas_log_scanned_event(void)
+static void wdrtas_log_scanned_event(void)
 {
 	int i;
 
@@ -175,13 +170,13 @@ wdrtas_log_scanned_event(void)
 		       "%02x %02x %02x %02x  %02x %02x %02x %02x   "
 		       "%02x %02x %02x %02x  %02x %02x %02x %02x\n",
 		       (i / 16) + 1, (WDRTAS_LOGBUFFER_LEN / 16),
-		       wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1], 
-		       wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3], 
-		       wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5], 
-		       wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7], 
-		       wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9], 
-		       wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11], 
-		       wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13], 
+		       wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1],
+		       wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3],
+		       wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5],
+		       wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7],
+		       wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9],
+		       wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11],
+		       wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13],
 		       wdrtas_logbuffer[i + 14], wdrtas_logbuffer[i + 15]);
 }
 
@@ -192,8 +187,7 @@ wdrtas_log_scanned_event(void)
  * RTAS function event-scan and repeats these calls as long as there are
  * events available. All events will be dumped.
  */
-static void
-wdrtas_timer_keepalive(void)
+static void wdrtas_timer_keepalive(void)
 {
 	long result;
 
@@ -218,8 +212,7 @@ wdrtas_timer_keepalive(void)
  * wdrtas_get_temperature returns the current temperature in Fahrenheit. It
  * uses the RTAS call get-sensor-state, token 3 to do so
  */
-static int
-wdrtas_get_temperature(void)
+static int wdrtas_get_temperature(void)
 {
 	long result;
 	int temperature = 0;
@@ -243,8 +236,7 @@ wdrtas_get_temperature(void)
  * returns a bitmask of defines WDIOF_... as defined in
  * include/linux/watchdog.h
  */
-static int
-wdrtas_get_status(void)
+static int wdrtas_get_status(void)
 {
 	return 0; /* TODO */
 }
@@ -255,8 +247,7 @@ wdrtas_get_status(void)
  * returns a bitmask of defines WDIOF_... as defined in
  * include/linux/watchdog.h, indicating why the watchdog rebooted the system
  */
-static int
-wdrtas_get_boot_status(void)
+static int wdrtas_get_boot_status(void)
 {
 	return 0; /* TODO */
 }
@@ -276,8 +267,7 @@ wdrtas_get_boot_status(void)
  * character 'V'. This character allows the watchdog device to be closed
  * properly.
  */
-static ssize_t
-wdrtas_write(struct file *file, const char __user *buf,
+static ssize_t wdrtas_write(struct file *file, const char __user *buf,
 	     size_t len, loff_t *ppos)
 {
 	int i;
@@ -306,7 +296,6 @@ out:
 
 /**
  * wdrtas_ioctl - ioctl function for the watchdog device
- * @inode: inode structure
  * @file: file structure
  * @cmd: command for ioctl
  * @arg: argument pointer
@@ -315,16 +304,16 @@ out:
  *
  * wdrtas_ioctl implements the watchdog API ioctls
  */
-static int
-wdrtas_ioctl(struct inode *inode, struct file *file,
-	     unsigned int cmd, unsigned long arg)
+
+static long wdrtas_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int __user *argp = (void __user *)arg;
 	int i;
 	static struct watchdog_info wdinfo = {
 		.options = WDRTAS_SUPPORTED_MASK,
 		.firmware_version = 0,
-		.identity = "wdrtas"
+		.identity = "wdrtas",
 	};
 
 	switch (cmd) {
@@ -357,9 +346,9 @@ wdrtas_ioctl(struct inode *inode, struct file *file,
 			wdrtas_timer_keepalive();
 			wdrtas_timer_start();
 		}
+		/* not implemented. Done by H8
 		if (i & WDIOS_TEMPPANIC) {
-			/* not implemented. Done by H8 */
-		}
+		} */
 		return 0;
 
 	case WDIOC_KEEPALIVE:
@@ -399,8 +388,7 @@ wdrtas_ioctl(struct inode *inode, struct file *file,
  *
  * function called when watchdog device is opened
  */
-static int
-wdrtas_open(struct inode *inode, struct file *file)
+static int wdrtas_open(struct inode *inode, struct file *file)
 {
 	/* only open once */
 	if (atomic_inc_return(&wdrtas_miscdev_open) > 1) {
@@ -423,8 +411,7 @@ wdrtas_open(struct inode *inode, struct file *file)
  *
  * close function. Always succeeds
  */
-static int
-wdrtas_close(struct inode *inode, struct file *file)
+static int wdrtas_close(struct inode *inode, struct file *file)
 {
 	/* only stop watchdog, if this was announced using 'V' before */
 	if (wdrtas_expect_close == WDRTAS_MAGIC_CHAR)
@@ -453,8 +440,7 @@ wdrtas_close(struct inode *inode, struct file *file)
  * wdrtas_temp_read gives the temperature to the users by copying this
  * value as one byte into the user space buffer. The unit is Fahrenheit...
  */
-static ssize_t
-wdrtas_temp_read(struct file *file, char __user *buf,
+static ssize_t wdrtas_temp_read(struct file *file, char __user *buf,
 		 size_t count, loff_t *ppos)
 {
 	int temperature = 0;
@@ -478,8 +464,7 @@ wdrtas_temp_read(struct file *file, char __user *buf,
  *
  * function called when temperature device is opened
  */
-static int
-wdrtas_temp_open(struct inode *inode, struct file *file)
+static int wdrtas_temp_open(struct inode *inode, struct file *file)
 {
 	return nonseekable_open(inode, file);
 }
@@ -493,8 +478,7 @@ wdrtas_temp_open(struct inode *inode, struct file *file)
  *
  * close function. Always succeeds
  */
-static int
-wdrtas_temp_close(struct inode *inode, struct file *file)
+static int wdrtas_temp_close(struct inode *inode, struct file *file)
 {
 	return 0;
 }
@@ -509,10 +493,10 @@ wdrtas_temp_close(struct inode *inode, struct file *file)
  *
  * wdrtas_reboot stops the watchdog in case of a reboot
  */
-static int
-wdrtas_reboot(struct notifier_block *this, unsigned long code, void *ptr)
+static int wdrtas_reboot(struct notifier_block *this,
+					unsigned long code, void *ptr)
 {
-	if ( (code==SYS_DOWN) || (code==SYS_HALT) )
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdrtas_timer_stop();
 
 	return NOTIFY_DONE;
@@ -524,7 +508,7 @@ static const struct file_operations wdrtas_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdrtas_write,
-	.ioctl		= wdrtas_ioctl,
+	.unlocked_ioctl	= wdrtas_ioctl,
 	.open		= wdrtas_open,
 	.release	= wdrtas_close,
 };
@@ -562,8 +546,7 @@ static struct notifier_block wdrtas_notifier = {
  * this watchdog driver. It tolerates, if "get-sensor-state" and
  * "ibm,get-system-parameter" are not available.
  */
-static int
-wdrtas_get_tokens(void)
+static int wdrtas_get_tokens(void)
 {
 	wdrtas_token_get_sensor_state = rtas_token("get-sensor-state");
 	if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE) {
@@ -603,8 +586,7 @@ wdrtas_get_tokens(void)
  * wdrtas_register_devs unregisters the watchdog and temperature watchdog
  * misc devs
  */
-static void
-wdrtas_unregister_devs(void)
+static void wdrtas_unregister_devs(void)
 {
 	misc_deregister(&wdrtas_miscdev);
 	if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE)
@@ -619,8 +601,7 @@ wdrtas_unregister_devs(void)
  * wdrtas_register_devs registers the watchdog and temperature watchdog
  * misc devs
  */
-static int
-wdrtas_register_devs(void)
+static int wdrtas_register_devs(void)
 {
 	int result;
 
@@ -651,8 +632,7 @@ wdrtas_register_devs(void)
  *
  * registers the file handlers and the reboot notifier
  */
-static int __init
-wdrtas_init(void)
+static int __init wdrtas_init(void)
 {
 	if (wdrtas_get_tokens())
 		return -ENODEV;
@@ -680,8 +660,7 @@ wdrtas_init(void)
  *
  * unregisters the file handlers and the reboot notifier
  */
-static void __exit
-wdrtas_exit(void)
+static void __exit wdrtas_exit(void)
 {
 	if (!wdrtas_nowayout)
 		wdrtas_timer_stop();
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index 756fb15fdce..deeebb2b13e 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -24,9 +24,10 @@
  *					Matt Crocker).
  *		Alan Cox	:	Added wdt= boot option
  *		Alan Cox	:	Cleaned up copy/user stuff
- *		Tim Hockin	:	Added insmod parameters, comment cleanup
- *					Parameterized timeout
- *		Tigran Aivazian	:	Restructured wdt_init() to handle failures
+ *		Tim Hockin	:	Added insmod parameters, comment
+ *					cleanup, parameterized timeout
+ *		Tigran Aivazian	:	Restructured wdt_init() to handle
+ *					failures
  *		Joel Becker	:	Added WDIOC_GET/SETTIMEOUT
  *		Matt Domsch	:	Added nowayout module option
  */
@@ -42,9 +43,9 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 #include "wd501p.h"
 
@@ -60,15 +61,19 @@ static char expect_close;
 static int heartbeat = WD_TIMO;
 static int wd_heartbeat;
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WD_TIMO) ")");
+MODULE_PARM_DESC(heartbeat,
+	"Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default="
+				__MODULE_STRING(WD_TIMO) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /* You must set these - there is no sane way to probe for this board. */
-static int io=0x240;
-static int irq=11;
+static int io = 0x240;
+static int irq = 11;
 
 static DEFINE_SPINLOCK(wdt_lock);
 
@@ -82,7 +87,8 @@ MODULE_PARM_DESC(irq, "WDT irq (default=11)");
 static int tachometer;
 
 module_param(tachometer, int, 0);
-MODULE_PARM_DESC(tachometer, "WDT501-P Fan Tachometer support (0=disable, default=0)");
+MODULE_PARM_DESC(tachometer,
+		"WDT501-P Fan Tachometer support (0=disable, default=0)");
 #endif /* CONFIG_WDT_501 */
 
 /*
@@ -91,9 +97,9 @@ MODULE_PARM_DESC(tachometer, "WDT501-P Fan Tachometer support (0=disable, defaul
 
 static void wdt_ctr_mode(int ctr, int mode)
 {
-	ctr<<=6;
-	ctr|=0x30;
-	ctr|=(mode<<1);
+	ctr <<= 6;
+	ctr |= 0x30;
+	ctr |= (mode << 1);
 	outb_p(ctr, WDT_CR);
 }
 
@@ -114,12 +120,15 @@ static int wdt_start(void)
 	unsigned long flags;
 	spin_lock_irqsave(&wdt_lock, flags);
 	inb_p(WDT_DC);			/* Disable watchdog */
-	wdt_ctr_mode(0,3);		/* Program CTR0 for Mode 3: Square Wave Generator */
-	wdt_ctr_mode(1,2);		/* Program CTR1 for Mode 2: Rate Generator */
-	wdt_ctr_mode(2,0);		/* Program CTR2 for Mode 0: Pulse on Terminal Count */
+	wdt_ctr_mode(0, 3);		/* Program CTR0 for Mode 3:
+						Square Wave Generator */
+	wdt_ctr_mode(1, 2);		/* Program CTR1 for Mode 2:
+						Rate Generator */
+	wdt_ctr_mode(2, 0);		/* Program CTR2 for Mode 0:
+						Pulse on Terminal Count */
 	wdt_ctr_load(0, 8948);		/* Count at 100Hz */
-	wdt_ctr_load(1,wd_heartbeat);	/* Heartbeat */
-	wdt_ctr_load(2,65535);		/* Length of reset pulse */
+	wdt_ctr_load(1, wd_heartbeat);	/* Heartbeat */
+	wdt_ctr_load(2, 65535);		/* Length of reset pulse */
 	outb_p(0, WDT_DC);		/* Enable watchdog */
 	spin_unlock_irqrestore(&wdt_lock, flags);
 	return 0;
@@ -131,13 +140,13 @@ static int wdt_start(void)
  *	Stop the watchdog driver.
  */
 
-static int wdt_stop (void)
+static int wdt_stop(void)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&wdt_lock, flags);
 	/* Turn the card off */
 	inb_p(WDT_DC);			/* Disable watchdog */
-	wdt_ctr_load(2,0);		/* 0 length reset pulses now */
+	wdt_ctr_load(2, 0);		/* 0 length reset pulses now */
 	spin_unlock_irqrestore(&wdt_lock, flags);
 	return 0;
 }
@@ -145,8 +154,8 @@ static int wdt_stop (void)
 /**
  *	wdt_ping:
  *
- *	Reload counter one with the watchdog heartbeat. We don't bother reloading
- *	the cascade counter.
+ *	Reload counter one with the watchdog heartbeat. We don't bother
+ *	reloading the cascade counter.
  */
 
 static int wdt_ping(void)
@@ -155,8 +164,9 @@ static int wdt_ping(void)
 	spin_lock_irqsave(&wdt_lock, flags);
 	/* Write a watchdog value */
 	inb_p(WDT_DC);			/* Disable watchdog */
-	wdt_ctr_mode(1,2);		/* Re-Program CTR1 for Mode 2: Rate Generator */
-	wdt_ctr_load(1,wd_heartbeat);	/* Heartbeat */
+	wdt_ctr_mode(1, 2);		/* Re-Program CTR1 for Mode 2:
+							Rate Generator */
+	wdt_ctr_load(1, wd_heartbeat);	/* Heartbeat */
 	outb_p(0, WDT_DC);		/* Enable watchdog */
 	spin_unlock_irqrestore(&wdt_lock, flags);
 	return 0;
@@ -166,13 +176,14 @@ static int wdt_ping(void)
  *	wdt_set_heartbeat:
  *	@t:		the new heartbeat value that needs to be set.
  *
- *	Set a new heartbeat value for the watchdog device. If the heartbeat value is
- *	incorrect we keep the old value and return -EINVAL. If successfull we
- *	return 0.
+ *	Set a new heartbeat value for the watchdog device. If the heartbeat
+ *	value is incorrect we keep the old value and return -EINVAL. If
+ *	successful we return 0.
  */
+
 static int wdt_set_heartbeat(int t)
 {
-	if ((t < 1) || (t > 65535))
+	if (t < 1 || t > 65535)
 		return -EINVAL;
 
 	heartbeat = t;
@@ -200,7 +211,7 @@ static int wdt_get_status(int *status)
 	new_status = inb_p(WDT_SR);
 	spin_unlock_irqrestore(&wdt_lock, flags);
 
-	*status=0;
+	*status = 0;
 	if (new_status & WDC_SR_ISOI0)
 		*status |= WDIOF_EXTERN1;
 	if (new_status & WDC_SR_ISII1)
@@ -266,7 +277,7 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id)
 
 #ifdef CONFIG_WDT_501
 	if (!(status & WDC_SR_TGOOD))
-		printk(KERN_CRIT "Overheat alarm.(%d)\n",inb_p(WDT_RT));
+		printk(KERN_CRIT "Overheat alarm.(%d)\n", inb_p(WDT_RT));
 	if (!(status & WDC_SR_PSUOVER))
 		printk(KERN_CRIT "PSU over voltage.\n");
 	if (!(status & WDC_SR_PSUUNDR))
@@ -304,9 +315,10 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id)
  *	write of data will do, as we we don't define content meaning.
  */
 
-static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
-	if(count) {
+	if (count) {
 		if (!nowayout) {
 			size_t i;
 
@@ -328,7 +340,6 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count
 
 /**
  *	wdt_ioctl:
- *	@inode: inode of the device
  *	@file: file handle to the device
  *	@cmd: watchdog command
  *	@arg: argument pointer
@@ -338,8 +349,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count
  *	querying capabilities and current status.
  */
 
-static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -362,32 +372,28 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		ident.options |= WDIOF_FANFAULT;
 #endif /* CONFIG_WDT_501 */
 
-	switch(cmd)
-	{
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-
-		case WDIOC_GETSTATUS:
-			wdt_get_status(&status);
-			return put_user(status, p);
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdt_ping();
-			return 0;
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_heartbeat, p))
-				return -EFAULT;
-
-			if (wdt_set_heartbeat(new_heartbeat))
-				return -EINVAL;
-
-			wdt_ping();
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, p);
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		wdt_get_status(&status);
+		return put_user(status, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		wdt_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (wdt_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		wdt_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -405,7 +411,7 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 static int wdt_open(struct inode *inode, struct file *file)
 {
-	if(test_and_set_bit(0, &wdt_is_open))
+	if (test_and_set_bit(0, &wdt_is_open))
 		return -EBUSY;
 	/*
 	 *	Activate
@@ -432,7 +438,8 @@ static int wdt_release(struct inode *inode, struct file *file)
 		wdt_stop();
 		clear_bit(0, &wdt_is_open);
 	} else {
-		printk(KERN_CRIT "wdt: WDT device closed unexpectedly.  WDT will not stop!\n");
+		printk(KERN_CRIT
+		 "wdt: WDT device closed unexpectedly.  WDT will not stop!\n");
 		wdt_ping();
 	}
 	expect_close = 0;
@@ -451,14 +458,15 @@ static int wdt_release(struct inode *inode, struct file *file)
  *	farenheit. It was designed by an imperial measurement luddite.
  */
 
-static ssize_t wdt_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr)
+static ssize_t wdt_temp_read(struct file *file, char __user *buf,
+						size_t count, loff_t *ptr)
 {
 	int temperature;
 
 	if (wdt_get_temperature(&temperature))
 		return -EFAULT;
 
-	if (copy_to_user (buf, &temperature, 1))
+	if (copy_to_user(buf, &temperature, 1))
 		return -EFAULT;
 
 	return 1;
@@ -506,10 +514,8 @@ static int wdt_temp_release(struct inode *inode, struct file *file)
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT) {
-		/* Turn the card off */
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt_stop();
-	}
 	return NOTIFY_DONE;
 }
 
@@ -522,7 +528,7 @@ static const struct file_operations wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdt_write,
-	.ioctl		= wdt_ioctl,
+	.unlocked_ioctl	= wdt_ioctl,
 	.open		= wdt_open,
 	.release	= wdt_release,
 };
@@ -576,7 +582,7 @@ static void __exit wdt_exit(void)
 #endif /* CONFIG_WDT_501 */
 	unregister_reboot_notifier(&wdt_notifier);
 	free_irq(irq, NULL);
-	release_region(io,8);
+	release_region(io, 8);
 }
 
 /**
@@ -591,44 +597,49 @@ static int __init wdt_init(void)
 {
 	int ret;
 
-	/* Check that the heartbeat value is within it's range ; if not reset to the default */
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
 	if (wdt_set_heartbeat(heartbeat)) {
 		wdt_set_heartbeat(WD_TIMO);
-		printk(KERN_INFO "wdt: heartbeat value must be 0<heartbeat<65536, using %d\n",
+		printk(KERN_INFO "wdt: heartbeat value must be 0 < heartbeat < 65536, using %d\n",
 			WD_TIMO);
 	}
 
 	if (!request_region(io, 8, "wdt501p")) {
-		printk(KERN_ERR "wdt: I/O address 0x%04x already in use\n", io);
+		printk(KERN_ERR
+			"wdt: I/O address 0x%04x already in use\n", io);
 		ret = -EBUSY;
 		goto out;
 	}
 
 	ret = request_irq(irq, wdt_interrupt, IRQF_DISABLED, "wdt501p", NULL);
-	if(ret) {
+	if (ret) {
 		printk(KERN_ERR "wdt: IRQ %d is not free.\n", irq);
 		goto outreg;
 	}
 
 	ret = register_reboot_notifier(&wdt_notifier);
-	if(ret) {
-		printk(KERN_ERR "wdt: cannot register reboot notifier (err=%d)\n", ret);
+	if (ret) {
+		printk(KERN_ERR
+		      "wdt: cannot register reboot notifier (err=%d)\n", ret);
 		goto outirq;
 	}
 
 #ifdef CONFIG_WDT_501
 	ret = misc_register(&temp_miscdev);
 	if (ret) {
-		printk(KERN_ERR "wdt: cannot register miscdev on minor=%d (err=%d)\n",
-			TEMP_MINOR, ret);
+		printk(KERN_ERR
+			"wdt: cannot register miscdev on minor=%d (err=%d)\n",
+							TEMP_MINOR, ret);
 		goto outrbt;
 	}
 #endif /* CONFIG_WDT_501 */
 
 	ret = misc_register(&wdt_miscdev);
 	if (ret) {
-		printk(KERN_ERR "wdt: cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR
+			"wdt: cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, ret);
 		goto outmisc;
 	}
 
@@ -636,7 +647,8 @@ static int __init wdt_init(void)
 	printk(KERN_INFO "WDT500/501-P driver 0.10 at 0x%04x (Interrupt %d). heartbeat=%d sec (nowayout=%d)\n",
 		io, irq, heartbeat, nowayout);
 #ifdef CONFIG_WDT_501
-	printk(KERN_INFO "wdt: Fan Tachometer is %s\n", (tachometer ? "Enabled" : "Disabled"));
+	printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
+				(tachometer ? "Enabled" : "Disabled"));
 #endif /* CONFIG_WDT_501 */
 
 out:
@@ -651,7 +663,7 @@ outrbt:
 outirq:
 	free_irq(irq, NULL);
 outreg:
-	release_region(io,8);
+	release_region(io, 8);
 	goto out;
 }
 
diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c
index e4cf661dc89..db362c34958 100644
--- a/drivers/watchdog/wdt285.c
+++ b/drivers/watchdog/wdt285.c
@@ -26,10 +26,10 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <linux/irq.h>
+#include <mach/hardware.h>
 
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/dec21285.h>
 
@@ -115,8 +115,8 @@ static int watchdog_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t
-watchdog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t watchdog_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
 {
 	/*
 	 *	Refresh the timer.
@@ -127,19 +127,18 @@ watchdog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_SETTIMEOUT,
 	.identity	= "Footbridge Watchdog",
 };
 
-static int
-watchdog_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	       unsigned long arg)
+static long watchdog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	unsigned int new_margin;
 	int ret = -ENOTTY;
 
-	switch(cmd) {
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		ret = 0;
 		if (copy_to_user((void *)arg, &ident, sizeof(ident)))
@@ -148,7 +147,7 @@ watchdog_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-		ret = put_user(0,(int *)arg);
+		ret = put_user(0, (int *)arg);
 		break;
 
 	case WDIOC_KEEPALIVE:
@@ -182,7 +181,7 @@ static const struct file_operations watchdog_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= watchdog_write,
-	.ioctl		= watchdog_ioctl,
+	.unlocked_ioctl	= watchdog_ioctl,
 	.open		= watchdog_open,
 	.release	= watchdog_release,
 };
@@ -204,11 +203,13 @@ static int __init footbridge_watchdog_init(void)
 	if (retval < 0)
 		return retval;
 
-	printk("Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n",
-	       soft_margin);
+	printk(KERN_INFO
+		"Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n",
+								soft_margin);
 
 	if (machine_is_cats())
-		printk("Warning: Watchdog reset may not work on this machine.\n");
+		printk(KERN_WARNING
+		  "Warning: Watchdog reset may not work on this machine.\n");
 	return 0;
 }
 
@@ -223,7 +224,7 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 module_param(soft_margin, int, 0);
-MODULE_PARM_DESC(soft_margin,"Watchdog timeout in seconds");
+MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
 
 module_init(footbridge_watchdog_init);
 module_exit(footbridge_watchdog_exit);
diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c
index fb4b876c9fd..60e28d49ff5 100644
--- a/drivers/watchdog/wdt977.c
+++ b/drivers/watchdog/wdt977.c
@@ -19,7 +19,8 @@
  *      07-Jul-2003 Daniele Bellucci: Audit return code of misc_register in
  *                                    nwwatchdog_init.
  *      25-Oct-2005 Woody Suwalski: Convert addresses to #defs, add spinlocks
- *				    remove limitiation to be used on Netwinders only
+ *				    remove limitiation to be used on
+ *				    Netwinders only
  */
 
 #include <linux/module.h>
@@ -33,11 +34,11 @@
 #include <linux/watchdog.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
-#include <asm/uaccess.h>
 
 #define WATCHDOG_VERSION  "0.04"
 #define WATCHDOG_NAME     "Wdt977"
@@ -45,7 +46,7 @@
 #define DRIVER_VERSION    WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"
 
 #define IO_INDEX_PORT	0x370		/* on some systems it can be 0x3F0 */
-#define IO_DATA_PORT	(IO_INDEX_PORT+1)
+#define IO_DATA_PORT	(IO_INDEX_PORT + 1)
 
 #define UNLOCK_DATA	0x87
 #define LOCK_DATA	0xAA
@@ -62,13 +63,16 @@ static	char expect_close;
 static	DEFINE_SPINLOCK(spinlock);
 
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (60..15300), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300), default="
+				__MODULE_STRING(DEFAULT_TIMEOUT) ")");
 module_param(testmode, int, 0);
-MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0");
+MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 /*
  * Start the watchdog
@@ -95,14 +99,16 @@ static int wdt977_start(void)
 	outb_p(0xF2, IO_INDEX_PORT);
 	outb_p(timeoutM, IO_DATA_PORT);
 	outb_p(0xF3, IO_INDEX_PORT);
-	outb_p(0x00, IO_DATA_PORT);	/* another setting is 0E for kbd/mouse/LED */
+	outb_p(0x00, IO_DATA_PORT);	/* another setting is 0E for
+					   kbd/mouse/LED */
 	outb_p(0xF4, IO_INDEX_PORT);
 	outb_p(0x00, IO_DATA_PORT);
 
-	/* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */
-	/* in test mode watch the bit 1 on F4 to indicate "triggered" */
-	if (!testmode)
-	{
+	/* At last select device Aux1 (dev=7) and set GP16 as a
+	 * watchdog output. In test mode watch the bit 1 on F4 to
+	 * indicate "triggered"
+	 */
+	if (!testmode) {
 		outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
 		outb_p(0x07, IO_DATA_PORT);
 		outb_p(0xE6, IO_INDEX_PORT);
@@ -147,7 +153,8 @@ static int wdt977_stop(void)
 	outb_p(0xF2, IO_INDEX_PORT);
 	outb_p(0x00, IO_DATA_PORT);
 
-	/* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */
+	/* at last select device Aux1 (dev=7) and set
+	   GP16 as a watchdog output */
 	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
 	outb_p(0x07, IO_DATA_PORT);
 	outb_p(0xE6, IO_INDEX_PORT);
@@ -202,16 +209,18 @@ static int wdt977_set_timeout(int t)
 	tmrval = (t + 59) / 60;
 
 	if (machine_is_netwinder()) {
-		/* we have a hw bug somewhere, so each 977 minute is actually only 30sec
-		 *  this limits the max timeout to half of device max of 255 minutes...
+		/* we have a hw bug somewhere, so each 977 minute is actually
+		 * only 30sec. This limits the max timeout to half of device
+		 * max of 255 minutes...
 		 */
 		tmrval += tmrval;
 	}
 
-	if ((tmrval < 1) || (tmrval > 255))
+	if (tmrval < 1 || tmrval > 255)
 		return -EINVAL;
 
-	/* timeout is the timeout in seconds, timeoutM is the timeout in minutes) */
+	/* timeout is the timeout in seconds, timeoutM is
+	   the timeout in minutes) */
 	timeout = t;
 	timeoutM = tmrval;
 	return 0;
@@ -243,7 +252,7 @@ static int wdt977_get_status(int *status)
 
 	spin_unlock_irqrestore(&spinlock, flags);
 
-	*status=0;
+	*status = 0;
 	if (new_status & 1)
 		*status |= WDIOF_CARDRESET;
 
@@ -258,7 +267,7 @@ static int wdt977_get_status(int *status)
 static int wdt977_open(struct inode *inode, struct file *file)
 {
 	/* If the watchdog is alive we don't need to start it again */
-	if( test_and_set_bit(0,&timer_alive) )
+	if (test_and_set_bit(0, &timer_alive))
 		return -EBUSY;
 
 	if (nowayout)
@@ -274,13 +283,13 @@ static int wdt977_release(struct inode *inode, struct file *file)
 	 *	Shut off the timer.
 	 * 	Lock it in if it's a module and we set nowayout
 	 */
-	if (expect_close == 42)
-	{
+	if (expect_close == 42) {
 		wdt977_stop();
-		clear_bit(0,&timer_alive);
+		clear_bit(0, &timer_alive);
 	} else {
 		wdt977_keepalive();
-		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		printk(KERN_CRIT PFX
+			"Unexpected close, not stopping watchdog!\n");
 	}
 	expect_close = 0;
 	return 0;
@@ -301,17 +310,14 @@ static int wdt977_release(struct inode *inode, struct file *file)
 static ssize_t wdt977_write(struct file *file, const char __user *buf,
 			    size_t count, loff_t *ppos)
 {
-	if (count)
-	{
-		if (!nowayout)
-		{
+	if (count) {
+		if (!nowayout) {
 			size_t i;
 
 			/* In case it was set long ago */
 			expect_close = 0;
 
-			for (i = 0; i != count; i++)
-			{
+			for (i = 0; i != count; i++) {
 				char c;
 				if (get_user(c, buf + i))
 					return -EFAULT;
@@ -326,6 +332,14 @@ static ssize_t wdt977_write(struct file *file, const char __user *buf,
 	return count;
 }
 
+static const struct watchdog_info ident = {
+	.options =		WDIOF_SETTIMEOUT |
+				WDIOF_MAGICCLOSE |
+				WDIOF_KEEPALIVEPING,
+	.firmware_version =	1,
+	.identity =		WATCHDOG_NAME,
+};
+
 /*
  *      wdt977_ioctl:
  *      @inode: inode of the device
@@ -337,16 +351,8 @@ static ssize_t wdt977_write(struct file *file, const char __user *buf,
  *      according to their available features.
  */
 
-static struct watchdog_info ident = {
-	.options =		WDIOF_SETTIMEOUT |
-				WDIOF_MAGICCLOSE |
-				WDIOF_KEEPALIVEPING,
-	.firmware_version =	1,
-	.identity =		WATCHDOG_NAME,
-};
-
-static int wdt977_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long wdt977_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int status;
 	int new_options, retval = -EINVAL;
@@ -358,11 +364,7 @@ static int wdt977_ioctl(struct inode *inode, struct file *file,
 
 	uarg.i = (int __user *)arg;
 
-	switch(cmd)
-	{
-	default:
-		return -ENOTTY;
-
+	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		return copy_to_user(uarg.ident, &ident,
 			sizeof(ident)) ? -EFAULT : 0;
@@ -374,12 +376,8 @@ static int wdt977_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, uarg.i);
 
-	case WDIOC_KEEPALIVE:
-		wdt977_keepalive();
-		return 0;
-
 	case WDIOC_SETOPTIONS:
-		if (get_user (new_options, uarg.i))
+		if (get_user(new_options, uarg.i))
 			return -EFAULT;
 
 		if (new_options & WDIOS_DISABLECARD) {
@@ -394,6 +392,10 @@ static int wdt977_ioctl(struct inode *inode, struct file *file,
 
 		return retval;
 
+	case WDIOC_KEEPALIVE:
+		wdt977_keepalive();
+		return 0;
+
 	case WDIOC_SETTIMEOUT:
 		if (get_user(new_timeout, uarg.i))
 			return -EFAULT;
@@ -407,29 +409,30 @@ static int wdt977_ioctl(struct inode *inode, struct file *file,
 	case WDIOC_GETTIMEOUT:
 		return put_user(timeout, uarg.i);
 
+	default:
+		return -ENOTTY;
+
 	}
 }
 
 static int wdt977_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
-	if(code==SYS_DOWN || code==SYS_HALT)
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdt977_stop();
 	return NOTIFY_DONE;
 }
 
-static const struct file_operations wdt977_fops=
-{
+static const struct file_operations wdt977_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdt977_write,
-	.ioctl		= wdt977_ioctl,
+	.unlocked_ioctl	= wdt977_ioctl,
 	.open		= wdt977_open,
 	.release	= wdt977_release,
 };
 
-static struct miscdevice wdt977_miscdev=
-{
+static struct miscdevice wdt977_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
 	.fops		= &wdt977_fops,
@@ -443,51 +446,48 @@ static int __init wd977_init(void)
 {
 	int rc;
 
-	//if (!machine_is_netwinder())
-	//	return -ENODEV;
-
 	printk(KERN_INFO PFX DRIVER_VERSION);
 
-	/* Check that the timeout value is within it's range ; if not reset to the default */
-	if (wdt977_set_timeout(timeout))
-	{
+	/* Check that the timeout value is within its range;
+	   if not reset to the default */
+	if (wdt977_set_timeout(timeout)) {
 		wdt977_set_timeout(DEFAULT_TIMEOUT);
-		printk(KERN_INFO PFX "timeout value must be 60<timeout<15300, using %d\n",
-			DEFAULT_TIMEOUT);
+		printk(KERN_INFO PFX
+		      "timeout value must be 60 < timeout < 15300, using %d\n",
+							DEFAULT_TIMEOUT);
 	}
 
 	/* on Netwinder the IOports are already reserved by
 	 * arch/arm/mach-footbridge/netwinder-hw.c
 	 */
-	if (!machine_is_netwinder())
-	{
-		if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME))
-		{
-			printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
-				IO_INDEX_PORT);
+	if (!machine_is_netwinder()) {
+		if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) {
+			printk(KERN_ERR PFX
+				"I/O address 0x%04x already in use\n",
+								IO_INDEX_PORT);
 			rc = -EIO;
 			goto err_out;
 		}
 	}
 
 	rc = register_reboot_notifier(&wdt977_notifier);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", rc);
 		goto err_out_region;
 	}
 
 	rc = misc_register(&wdt977_miscdev);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			wdt977_miscdev.minor, rc);
+	if (rc) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						wdt977_miscdev.minor, rc);
 		goto err_out_reboot;
 	}
 
-	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d, testmode=%i)\n",
-		timeout, nowayout, testmode);
+	printk(KERN_INFO PFX
+		"initialized. timeout=%d sec (nowayout=%d, testmode=%i)\n",
+						timeout, nowayout, testmode);
 
 	return 0;
 
@@ -495,7 +495,7 @@ err_out_reboot:
 	unregister_reboot_notifier(&wdt977_notifier);
 err_out_region:
 	if (!machine_is_netwinder())
-	        release_region(IO_INDEX_PORT,2);
+		release_region(IO_INDEX_PORT, 2);
 err_out:
 	return rc;
 }
@@ -505,7 +505,7 @@ static void __exit wd977_exit(void)
 	wdt977_stop();
 	misc_deregister(&wdt977_miscdev);
 	unregister_reboot_notifier(&wdt977_notifier);
-	release_region(IO_INDEX_PORT,2);
+	release_region(IO_INDEX_PORT, 2);
 }
 
 module_init(wd977_init);
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index 1355608683e..ed02bdb38c0 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -29,9 +29,11 @@
  *		JP Nollmann	:	Added support for PCI wdt501p
  *		Alan Cox	:	Split ISA and PCI cards into two drivers
  *		Jeff Garzik	:	PCI cleanups
- *		Tigran Aivazian	:	Restructured wdtpci_init_one() to handle failures
+ *		Tigran Aivazian	:	Restructured wdtpci_init_one() to handle
+ *					failures
  *		Joel Becker 	:	Added WDIOC_GET/SETTIMEOUT
- *		Zwane Mwaikambo	:	Magic char closing, locking changes, cleanups
+ *		Zwane Mwaikambo	:	Magic char closing, locking changes,
+ *					cleanups
  *		Matt Domsch	:	nowayout module option
  */
 
@@ -42,14 +44,15 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/ioport.h>
+#include <linux/delay.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define WDT_IS_PCI
@@ -73,7 +76,7 @@
 /* We can only use 1 card due to the /dev/watchdog restriction */
 static int dev_count;
 
-static struct semaphore open_sem;
+static unsigned long open_lock;
 static DEFINE_SPINLOCK(wdtpci_lock);
 static char expect_close;
 
@@ -86,18 +89,23 @@ static int irq;
 static int heartbeat = WD_TIMO;
 static int wd_heartbeat;
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WD_TIMO) ")");
+MODULE_PARM_DESC(heartbeat,
+		"Watchdog heartbeat in seconds. (0<heartbeat<65536, default="
+				__MODULE_STRING(WD_TIMO) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 #ifdef CONFIG_WDT_501_PCI
 /* Support for the Fan Tachometer on the PCI-WDT501 */
 static int tachometer;
 
 module_param(tachometer, int, 0);
-MODULE_PARM_DESC(tachometer, "PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
+MODULE_PARM_DESC(tachometer,
+	"PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
 #endif /* CONFIG_WDT_501_PCI */
 
 /*
@@ -106,16 +114,19 @@ MODULE_PARM_DESC(tachometer, "PCI-WDT501 Fan Tachometer support (0=disable, defa
 
 static void wdtpci_ctr_mode(int ctr, int mode)
 {
-	ctr<<=6;
-	ctr|=0x30;
-	ctr|=(mode<<1);
-	outb_p(ctr, WDT_CR);
+	ctr <<= 6;
+	ctr |= 0x30;
+	ctr |= (mode << 1);
+	outb(ctr, WDT_CR);
+	udelay(8);
 }
 
 static void wdtpci_ctr_load(int ctr, int val)
 {
-	outb_p(val&0xFF, WDT_COUNT0+ctr);
-	outb_p(val>>8, WDT_COUNT0+ctr);
+	outb(val & 0xFF, WDT_COUNT0 + ctr);
+	udelay(8);
+	outb(val >> 8, WDT_COUNT0 + ctr);
+	udelay(8);
 }
 
 /**
@@ -134,23 +145,35 @@ static int wdtpci_start(void)
 	 * "pet" the watchdog, as Access says.
 	 * This resets the clock outputs.
 	 */
-	inb_p(WDT_DC);			/* Disable watchdog */
-	wdtpci_ctr_mode(2,0);		/* Program CTR2 for Mode 0: Pulse on Terminal Count */
-	outb_p(0, WDT_DC);		/* Enable watchdog */
-
-	inb_p(WDT_DC);			/* Disable watchdog */
-	outb_p(0, WDT_CLOCK);		/* 2.0833MHz clock */
-	inb_p(WDT_BUZZER);		/* disable */
-	inb_p(WDT_OPTONOTRST);		/* disable */
-	inb_p(WDT_OPTORST);		/* disable */
-	inb_p(WDT_PROGOUT);		/* disable */
-	wdtpci_ctr_mode(0,3);		/* Program CTR0 for Mode 3: Square Wave Generator */
-	wdtpci_ctr_mode(1,2);		/* Program CTR1 for Mode 2: Rate Generator */
-	wdtpci_ctr_mode(2,1);		/* Program CTR2 for Mode 1: Retriggerable One-Shot */
-	wdtpci_ctr_load(0,20833);	/* count at 100Hz */
-	wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	wdtpci_ctr_mode(2, 0);		/* Program CTR2 for Mode 0:
+						Pulse on Terminal Count */
+	outb(0, WDT_DC);		/* Enable watchdog */
+	udelay(8);
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	outb(0, WDT_CLOCK);		/* 2.0833MHz clock */
+	udelay(8);
+	inb(WDT_BUZZER);		/* disable */
+	udelay(8);
+	inb(WDT_OPTONOTRST);		/* disable */
+	udelay(8);
+	inb(WDT_OPTORST);		/* disable */
+	udelay(8);
+	inb(WDT_PROGOUT);		/* disable */
+	udelay(8);
+	wdtpci_ctr_mode(0, 3);		/* Program CTR0 for Mode 3:
+						Square Wave Generator */
+	wdtpci_ctr_mode(1, 2);		/* Program CTR1 for Mode 2:
+						Rate Generator */
+	wdtpci_ctr_mode(2, 1);		/* Program CTR2 for Mode 1:
+						Retriggerable One-Shot */
+	wdtpci_ctr_load(0, 20833);	/* count at 100Hz */
+	wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */
 	/* DO NOT LOAD CTR2 on PCI card! -- JPN */
-	outb_p(0, WDT_DC);		/* Enable watchdog */
+	outb(0, WDT_DC);		/* Enable watchdog */
+	udelay(8);
 
 	spin_unlock_irqrestore(&wdtpci_lock, flags);
 	return 0;
@@ -162,14 +185,15 @@ static int wdtpci_start(void)
  *	Stop the watchdog driver.
  */
 
-static int wdtpci_stop (void)
+static int wdtpci_stop(void)
 {
 	unsigned long flags;
 
 	/* Turn the card off */
 	spin_lock_irqsave(&wdtpci_lock, flags);
-	inb_p(WDT_DC);			/* Disable watchdog */
-	wdtpci_ctr_load(2,0);		/* 0 length reset pulses now */
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	wdtpci_ctr_load(2, 0);		/* 0 length reset pulses now */
 	spin_unlock_irqrestore(&wdtpci_lock, flags);
 	return 0;
 }
@@ -177,20 +201,23 @@ static int wdtpci_stop (void)
 /**
  *	wdtpci_ping:
  *
- *	Reload counter one with the watchdog heartbeat. We don't bother reloading
- *	the cascade counter.
+ *	Reload counter one with the watchdog heartbeat. We don't bother
+ *	reloading the cascade counter.
  */
 
 static int wdtpci_ping(void)
 {
 	unsigned long flags;
 
-	/* Write a watchdog value */
 	spin_lock_irqsave(&wdtpci_lock, flags);
-	inb_p(WDT_DC);			/* Disable watchdog */
-	wdtpci_ctr_mode(1,2);		/* Re-Program CTR1 for Mode 2: Rate Generator */
-	wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */
-	outb_p(0, WDT_DC);		/* Enable watchdog */
+	/* Write a watchdog value */
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	wdtpci_ctr_mode(1, 2);		/* Re-Program CTR1 for Mode 2:
+							Rate Generator */
+	wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */
+	outb(0, WDT_DC);		/* Enable watchdog */
+	udelay(8);
 	spin_unlock_irqrestore(&wdtpci_lock, flags);
 	return 0;
 }
@@ -199,14 +226,14 @@ static int wdtpci_ping(void)
  *	wdtpci_set_heartbeat:
  *	@t:		the new heartbeat value that needs to be set.
  *
- *	Set a new heartbeat value for the watchdog device. If the heartbeat value is
- *	incorrect we keep the old value and return -EINVAL. If successfull we
- *	return 0.
+ *	Set a new heartbeat value for the watchdog device. If the heartbeat
+ *	value is incorrect we keep the old value and return -EINVAL.
+ *	If successful we return 0.
  */
 static int wdtpci_set_heartbeat(int t)
 {
 	/* Arbitrary, can't find the card's limits */
-	if ((t < 1) || (t > 65535))
+	if (t < 1 || t > 65535)
 		return -EINVAL;
 
 	heartbeat = t;
@@ -227,9 +254,14 @@ static int wdtpci_set_heartbeat(int t)
 
 static int wdtpci_get_status(int *status)
 {
-	unsigned char new_status=inb_p(WDT_SR);
+	unsigned char new_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdtpci_lock, flags);
+	new_status = inb(WDT_SR);
+	spin_unlock_irqrestore(&wdtpci_lock, flags);
 
-	*status=0;
+	*status = 0;
 	if (new_status & WDC_SR_ISOI0)
 		*status |= WDIOF_EXTERN1;
 	if (new_status & WDC_SR_ISII1)
@@ -259,8 +291,12 @@ static int wdtpci_get_status(int *status)
 
 static int wdtpci_get_temperature(int *temperature)
 {
-	unsigned short c=inb_p(WDT_RT);
-
+	unsigned short c;
+	unsigned long flags;
+	spin_lock_irqsave(&wdtpci_lock, flags);
+	c = inb(WDT_RT);
+	udelay(8);
+	spin_unlock_irqrestore(&wdtpci_lock, flags);
 	*temperature = (c * 11 / 15) + 7;
 	return 0;
 }
@@ -282,17 +318,25 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
 	 *	Read the status register see what is up and
 	 *	then printk it.
 	 */
-	unsigned char status=inb_p(WDT_SR);
+	unsigned char status;
+
+	spin_lock(&wdtpci_lock);
+
+	status = inb(WDT_SR);
+	udelay(8);
 
 	printk(KERN_CRIT PFX "status %d\n", status);
 
 #ifdef CONFIG_WDT_501_PCI
-	if (!(status & WDC_SR_TGOOD))
- 		printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",inb_p(WDT_RT));
+	if (!(status & WDC_SR_TGOOD)) {
+		u8 alarm = inb(WDT_RT);
+		printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", alarm);
+		udelay(8);
+	}
 	if (!(status & WDC_SR_PSUOVER))
- 		printk(KERN_CRIT PFX "PSU over voltage.\n");
+		printk(KERN_CRIT PFX "PSU over voltage.\n");
 	if (!(status & WDC_SR_PSUUNDR))
- 		printk(KERN_CRIT PFX "PSU under voltage.\n");
+		printk(KERN_CRIT PFX "PSU under voltage.\n");
 	if (tachometer) {
 		if (!(status & WDC_SR_FANGOOD))
 			printk(KERN_CRIT PFX "Possible fan fault.\n");
@@ -310,6 +354,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
 		printk(KERN_CRIT PFX "Reset in 5ms.\n");
 #endif
 	}
+	spin_unlock(&wdtpci_lock);
 	return IRQ_HANDLED;
 }
 
@@ -325,7 +370,8 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
  *	write of data will do, as we we don't define content meaning.
  */
 
-static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t wdtpci_write(struct file *file, const char __user *buf,
+					size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
@@ -335,7 +381,7 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co
 
 			for (i = 0; i != count; i++) {
 				char c;
-				if(get_user(c, buf+i))
+				if (get_user(c, buf + i))
 					return -EFAULT;
 				if (c == 'V')
 					expect_close = 42;
@@ -343,13 +389,11 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co
 		}
 		wdtpci_ping();
 	}
-
 	return count;
 }
 
 /**
  *	wdtpci_ioctl:
- *	@inode: inode of the device
  *	@file: file handle to the device
  *	@cmd: watchdog command
  *	@arg: argument pointer
@@ -359,8 +403,8 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co
  *	querying capabilities and current status.
  */
 
-static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long wdtpci_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int new_heartbeat;
 	int status;
@@ -383,32 +427,28 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 		ident.options |= WDIOF_FANFAULT;
 #endif /* CONFIG_WDT_501_PCI */
 
-	switch(cmd)
-	{
-		default:
-			return -ENOTTY;
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
-
-		case WDIOC_GETSTATUS:
-			wdtpci_get_status(&status);
-			return put_user(status, p);
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-		case WDIOC_KEEPALIVE:
-			wdtpci_ping();
-			return 0;
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_heartbeat, p))
-				return -EFAULT;
-
-			if (wdtpci_set_heartbeat(new_heartbeat))
-				return -EINVAL;
-
-			wdtpci_ping();
-			/* Fall */
-		case WDIOC_GETTIMEOUT:
-			return put_user(heartbeat, p);
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		wdtpci_get_status(&status);
+		return put_user(status, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		wdtpci_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (wdtpci_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		wdtpci_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
 	}
 }
 
@@ -426,12 +466,11 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 
 static int wdtpci_open(struct inode *inode, struct file *file)
 {
-	if (down_trylock(&open_sem))
+	if (test_and_set_bit(0, &open_lock))
 		return -EBUSY;
 
-	if (nowayout) {
+	if (nowayout)
 		__module_get(THIS_MODULE);
-	}
 	/*
 	 *	Activate
 	 */
@@ -460,7 +499,7 @@ static int wdtpci_release(struct inode *inode, struct file *file)
 		wdtpci_ping();
 	}
 	expect_close = 0;
-	up(&open_sem);
+	clear_bit(0, &open_lock);
 	return 0;
 }
 
@@ -476,14 +515,15 @@ static int wdtpci_release(struct inode *inode, struct file *file)
  *	fahrenheit. It was designed by an imperial measurement luddite.
  */
 
-static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr)
+static ssize_t wdtpci_temp_read(struct file *file, char __user *buf,
+						size_t count, loff_t *ptr)
 {
 	int temperature;
 
 	if (wdtpci_get_temperature(&temperature))
 		return -EFAULT;
 
-	if (copy_to_user (buf, &temperature, 1))
+	if (copy_to_user(buf, &temperature, 1))
 		return -EFAULT;
 
 	return 1;
@@ -529,12 +569,10 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file)
  */
 
 static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code,
-	void *unused)
+							void *unused)
 {
-	if (code==SYS_DOWN || code==SYS_HALT) {
-		/* Turn the card off */
+	if (code == SYS_DOWN || code == SYS_HALT)
 		wdtpci_stop();
-	}
 	return NOTIFY_DONE;
 }
 
@@ -547,7 +585,7 @@ static const struct file_operations wdtpci_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= wdtpci_write,
-	.ioctl		= wdtpci_ioctl,
+	.unlocked_ioctl	= wdtpci_ioctl,
 	.open		= wdtpci_open,
 	.release	= wdtpci_release,
 };
@@ -584,80 +622,85 @@ static struct notifier_block wdtpci_notifier = {
 };
 
 
-static int __devinit wdtpci_init_one (struct pci_dev *dev,
-				   const struct pci_device_id *ent)
+static int __devinit wdtpci_init_one(struct pci_dev *dev,
+					const struct pci_device_id *ent)
 {
 	int ret = -EIO;
 
 	dev_count++;
 	if (dev_count > 1) {
-		printk (KERN_ERR PFX "this driver only supports 1 device\n");
+		printk(KERN_ERR PFX "This driver only supports one device\n");
 		return -ENODEV;
 	}
 
-	if (pci_enable_device (dev)) {
-		printk (KERN_ERR PFX "Not possible to enable PCI Device\n");
+	if (pci_enable_device(dev)) {
+		printk(KERN_ERR PFX "Not possible to enable PCI Device\n");
 		return -ENODEV;
 	}
 
-	if (pci_resource_start (dev, 2) == 0x0000) {
-		printk (KERN_ERR PFX "No I/O-Address for card detected\n");
+	if (pci_resource_start(dev, 2) == 0x0000) {
+		printk(KERN_ERR PFX "No I/O-Address for card detected\n");
 		ret = -ENODEV;
 		goto out_pci;
 	}
 
-	sema_init(&open_sem, 1);
-
 	irq = dev->irq;
-	io = pci_resource_start (dev, 2);
+	io = pci_resource_start(dev, 2);
 
-	if (request_region (io, 16, "wdt_pci") == NULL) {
-		printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", io);
+	if (request_region(io, 16, "wdt_pci") == NULL) {
+		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", io);
 		goto out_pci;
 	}
 
-	if (request_irq (irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
+	if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
 			 "wdt_pci", &wdtpci_miscdev)) {
-		printk (KERN_ERR PFX "IRQ %d is not free\n", irq);
+		printk(KERN_ERR PFX "IRQ %d is not free\n", irq);
 		goto out_reg;
 	}
 
-	printk ("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n",
-		io, irq);
+	printk(KERN_INFO
+	 "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n",
+								io, irq);
 
-	/* Check that the heartbeat value is within it's range ; if not reset to the default */
+	/* Check that the heartbeat value is within its range;
+	   if not reset to the default */
 	if (wdtpci_set_heartbeat(heartbeat)) {
 		wdtpci_set_heartbeat(WD_TIMO);
-		printk(KERN_INFO PFX "heartbeat value must be 0<heartbeat<65536, using %d\n",
-			WD_TIMO);
+		printk(KERN_INFO PFX
+		  "heartbeat value must be 0 < heartbeat < 65536, using %d\n",
+								WD_TIMO);
 	}
 
-	ret = register_reboot_notifier (&wdtpci_notifier);
+	ret = register_reboot_notifier(&wdtpci_notifier);
 	if (ret) {
-		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
 		goto out_irq;
 	}
 
 #ifdef CONFIG_WDT_501_PCI
-	ret = misc_register (&temp_miscdev);
+	ret = misc_register(&temp_miscdev);
 	if (ret) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			TEMP_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+					TEMP_MINOR, ret);
 		goto out_rbt;
 	}
 #endif /* CONFIG_WDT_501_PCI */
 
-	ret = misc_register (&wdtpci_miscdev);
+	ret = misc_register(&wdtpci_miscdev);
 	if (ret) {
-		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			WATCHDOG_MINOR, ret);
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+						WATCHDOG_MINOR, ret);
 		goto out_misc;
 	}
 
 	printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
 		heartbeat, nowayout);
 #ifdef CONFIG_WDT_501_PCI
-	printk(KERN_INFO "wdt: Fan Tachometer is %s\n", (tachometer ? "Enabled" : "Disabled"));
+	printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
+				(tachometer ? "Enabled" : "Disabled"));
 #endif /* CONFIG_WDT_501_PCI */
 
 	ret = 0;
@@ -673,14 +716,14 @@ out_rbt:
 out_irq:
 	free_irq(irq, &wdtpci_miscdev);
 out_reg:
-	release_region (io, 16);
+	release_region(io, 16);
 out_pci:
 	pci_disable_device(dev);
 	goto out;
 }
 
 
-static void __devexit wdtpci_remove_one (struct pci_dev *pdev)
+static void __devexit wdtpci_remove_one(struct pci_dev *pdev)
 {
 	/* here we assume only one device will ever have
 	 * been picked up and registered by probe function */
@@ -728,7 +771,7 @@ static struct pci_driver wdtpci_driver = {
 
 static void __exit wdtpci_cleanup(void)
 {
-	pci_unregister_driver (&wdtpci_driver);
+	pci_unregister_driver(&wdtpci_driver);
 }
 
 
@@ -742,7 +785,7 @@ static void __exit wdtpci_cleanup(void)
 
 static int __init wdtpci_init(void)
 {
-	return pci_register_driver (&wdtpci_driver);
+	return pci_register_driver(&wdtpci_driver);
 }
 
 
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index d4427cb8697..2e15da5459c 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -60,7 +60,7 @@
 
 #define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
 
-#define BALLOON_CLASS_NAME "memory"
+#define BALLOON_CLASS_NAME "xen_memory"
 
 struct balloon_stats {
 	/* We aim for 'current allocation' == 'target allocation'. */
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index a5bc91ae6ff..d0e87cbe157 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -102,7 +102,7 @@ static void do_suspend(void)
 	/* XXX use normal device tree? */
 	xenbus_suspend();
 
-	err = stop_machine_run(xen_suspend, &cancelled, 0);
+	err = stop_machine(xen_suspend, &cancelled, &cpumask_of_cpu(0));
 	if (err) {
 		printk(KERN_ERR "failed to start xen_suspend: %d\n", err);
 		goto out;
diff --git a/firmware/Makefile b/firmware/Makefile
index 9fe86041f86..da75a6fbc6b 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -146,15 +146,27 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex)
 
+# Don't depend on ihex2fw if we're installing and it already exists.
+# Putting it after | in the dependencies doesn't seem sufficient when
+# we're installing after a cross-compile, because ihex2fw has dependencies
+# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and 
+# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+# is exported read-only for someone to run 'make install'.
+ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ihex2fw_dep :=
+else
+ihex2fw_dep := $(obj)/ihex2fw
+endif
+
 # .HEX is also Intel HEX, but where the offset and length in each record
 # is actually meaningful, because the firmware has to be loaded in a certain
 # order rather than as a single binary blob. Thus, we convert them into our
 # more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex2fw)
 
 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,h16tofw)
 
 $(firmware-dirs):
diff --git a/firmware/ihex2fw.c b/firmware/ihex2fw.c
index 660b191ed75..8f7fdaa9e01 100644
--- a/firmware/ihex2fw.c
+++ b/firmware/ihex2fw.c
@@ -250,19 +250,19 @@ static void file_record(struct ihex_binrec *record)
 
 static int output_records(int outfd)
 {
-	unsigned char zeroes[5] = {0, 0, 0, 0, 0};
+	unsigned char zeroes[6] = {0, 0, 0, 0, 0, 0};
 	struct ihex_binrec *p = records;
 
 	while (p) {
 		uint16_t writelen = (p->len + 9) & ~3;
 
 		p->addr = htonl(p->addr);
-		p->len = htonl(p->len);
+		p->len = htons(p->len);
 		write(outfd, &p->addr, writelen);
 		p = p->next;
 	}
 	/* EOF record is zero length, since we don't bother to represent
 	   the type field in the binary version */
-	write(outfd, zeroes, 5);
+	write(outfd, zeroes, 6);
 	return 0;
 }
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 88e3787c6ea..e298fe19409 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -119,6 +119,7 @@ int v9fs_dir_release(struct inode *inode, struct file *filp)
 
 const struct file_operations v9fs_dir_operations = {
 	.read = generic_read_dir,
+	.llseek = generic_file_llseek,
 	.readdir = v9fs_dir_readdir,
 	.open = v9fs_file_open,
 	.release = v9fs_dir_release,
diff --git a/fs/Kconfig b/fs/Kconfig
index d3873583360..abccb5dab9a 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1930,6 +1930,16 @@ config CIFS_WEAK_PW_HASH
 
 	  If unsure, say N.
 
+config CIFS_UPCALL
+	  bool "Kerberos/SPNEGO advanced session setup"
+	  depends on CIFS && KEYS
+	  help
+	    Enables an upcall mechanism for CIFS which accesses
+	    userspace helper utilities to provide SPNEGO packaged (RFC 4178)
+	    Kerberos tickets which are needed to mount to certain secure servers
+	    (for which more secure Kerberos authentication is required). If
+	    unsure, say N.
+
 config CIFS_XATTR
         bool "CIFS extended attributes"
         depends on CIFS
@@ -1982,17 +1992,6 @@ config CIFS_EXPERIMENTAL
 	    (which is disabled by default). See the file fs/cifs/README 
 	    for more details.  If unsure, say N.
 
-config CIFS_UPCALL
-	  bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
-	  depends on CIFS_EXPERIMENTAL
-	  depends on KEYS
-	  help
-	    Enables an upcall mechanism for CIFS which accesses
-	    userspace helper utilities to provide SPNEGO packaged (RFC 4178)
-	    Kerberos tickets which are needed to mount to certain secure servers
-	    (for which more secure Kerberos authentication is required). If
-	    unsure, say N.
-
 config CIFS_DFS_UPCALL
 	  bool "DFS feature support (EXPERIMENTAL)"
 	  depends on CIFS_EXPERIMENTAL
diff --git a/fs/adfs/dir.c b/fs/adfs/dir.c
index fc1a8dc64d7..85a30e92980 100644
--- a/fs/adfs/dir.c
+++ b/fs/adfs/dir.c
@@ -197,6 +197,7 @@ out:
 
 const struct file_operations adfs_dir_operations = {
 	.read		= generic_read_dir,
+	.llseek		= generic_file_llseek,
 	.readdir	= adfs_readdir,
 	.fsync		= file_fsync,
 };
diff --git a/fs/affs/dir.c b/fs/affs/dir.c
index 6e3f282424b..7b36904dbea 100644
--- a/fs/affs/dir.c
+++ b/fs/affs/dir.c
@@ -19,6 +19,7 @@ static int affs_readdir(struct file *, void *, filldir_t);
 
 const struct file_operations affs_dir_operations = {
 	.read		= generic_read_dir,
+	.llseek		= generic_file_llseek,
 	.readdir	= affs_readdir,
 	.fsync		= file_fsync,
 };
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index 2f5503902c3..78db4953a80 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -232,7 +232,7 @@ static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd)
 	}
 
 	mntget(newmnt);
-	err = do_add_mount(newmnt, nd, MNT_SHRINKABLE, &afs_vfsmounts);
+	err = do_add_mount(newmnt, &nd->path, MNT_SHRINKABLE, &afs_vfsmounts);
 	switch (err) {
 	case 0:
 		path_put(&nd->path);
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 9a849ad3c48..065b4e10681 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -404,7 +404,7 @@ static int afs_write_back_from_locked_page(struct afs_writeback *wb,
 			page = pages[loop];
 			if (page->index > wb->last)
 				break;
-			if (TestSetPageLocked(page))
+			if (!trylock_page(page))
 				break;
 			if (!PageDirty(page) ||
 			    page_private(page) != (unsigned long) wb) {
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index bcfb2dc0a61..2a41c2a7fc5 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -36,6 +36,7 @@ const struct file_operations autofs4_root_operations = {
 	.release	= dcache_dir_close,
 	.read		= generic_read_dir,
 	.readdir	= dcache_readdir,
+	.llseek		= dcache_dir_lseek,
 	.ioctl		= autofs4_root_ioctl,
 };
 
@@ -44,6 +45,7 @@ const struct file_operations autofs4_dir_operations = {
 	.release	= dcache_dir_close,
 	.read		= generic_read_dir,
 	.readdir	= dcache_readdir,
+	.llseek		= dcache_dir_lseek,
 };
 
 const struct inode_operations autofs4_indirect_root_inode_operations = {
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 02c6e62b72f..740f53672a8 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -66,6 +66,7 @@ static struct kmem_cache *befs_inode_cachep;
 static const struct file_operations befs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= befs_readdir,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct inode_operations befs_dir_inode_operations = {
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 87ee5ccee34..ed8feb052df 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -125,8 +125,8 @@ static int bfs_create(struct inode *dir, struct dentry *dentry, int mode,
 							inode->i_ino);
 	if (err) {
 		inode_dec_link_count(inode);
-		iput(inode);
 		mutex_unlock(&info->bfs_lock);
+		iput(inode);
 		return err;
 	}
 	mutex_unlock(&info->bfs_lock);
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 56372ecf169..dfc0197905c 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -914,7 +914,9 @@ static int load_flat_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	/* Stash our initial stack pointer into the mm structure */
 	current->mm->start_stack = (unsigned long )sp;
 
-	
+#ifdef FLAT_PLAT_INIT
+	FLAT_PLAT_INIT(regs);
+#endif
 	DBG_FLT("start_thread(regs=0x%x, entry=0x%x, start_stack=0x%x)\n",
 		(int)regs, (int)start_addr, (int)current->mm->start_stack);
 	
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index 756205314c2..8d7e88e02e0 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -120,8 +120,6 @@ static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	if (bprm->misc_bang)
 		goto _ret;
 
-	bprm->misc_bang = 1;
-
 	/* to keep locking time low, we copy the interpreter string */
 	read_lock(&entries_lock);
 	fmt = check_file(bprm);
@@ -199,6 +197,8 @@ static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	if (retval < 0)
 		goto _error;
 
+	bprm->misc_bang = 1;
+
 	retval = search_binary_handler (bprm, regs);
 	if (retval < 0)
 		goto _error;
diff --git a/fs/bio.c b/fs/bio.c
index 25f1af0d81e..3cba7ae34d7 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -77,11 +77,8 @@ struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx, struct
 	 */
 
 	bvl = mempool_alloc(bs->bvec_pools[*idx], gfp_mask);
-	if (bvl) {
-		struct biovec_slab *bp = bvec_slabs + *idx;
-
-		memset(bvl, 0, bp->nr_vecs * sizeof(struct bio_vec));
-	}
+	if (bvl)
+		memset(bvl, 0, bvec_nr_vecs(*idx) * sizeof(struct bio_vec));
 
 	return bvl;
 }
@@ -149,7 +146,7 @@ struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
 				goto out;
 			}
 			bio->bi_flags |= idx << BIO_POOL_OFFSET;
-			bio->bi_max_vecs = bvec_slabs[idx].nr_vecs;
+			bio->bi_max_vecs = bvec_nr_vecs(idx);
 		}
 		bio->bi_io_vec = bvl;
 	}
@@ -472,20 +469,21 @@ static void bio_free_map_data(struct bio_map_data *bmd)
 	kfree(bmd);
 }
 
-static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count)
+static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
+					       gfp_t gfp_mask)
 {
-	struct bio_map_data *bmd = kmalloc(sizeof(*bmd), GFP_KERNEL);
+	struct bio_map_data *bmd = kmalloc(sizeof(*bmd), gfp_mask);
 
 	if (!bmd)
 		return NULL;
 
-	bmd->iovecs = kmalloc(sizeof(struct bio_vec) * nr_segs, GFP_KERNEL);
+	bmd->iovecs = kmalloc(sizeof(struct bio_vec) * nr_segs, gfp_mask);
 	if (!bmd->iovecs) {
 		kfree(bmd);
 		return NULL;
 	}
 
-	bmd->sgvecs = kmalloc(sizeof(struct sg_iovec) * iov_count, GFP_KERNEL);
+	bmd->sgvecs = kmalloc(sizeof(struct sg_iovec) * iov_count, gfp_mask);
 	if (bmd->sgvecs)
 		return bmd;
 
@@ -494,8 +492,8 @@ static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count)
 	return NULL;
 }
 
-static int __bio_copy_iov(struct bio *bio, struct sg_iovec *iov, int iov_count,
-			  int uncopy)
+static int __bio_copy_iov(struct bio *bio, struct bio_vec *iovecs,
+			  struct sg_iovec *iov, int iov_count, int uncopy)
 {
 	int ret = 0, i;
 	struct bio_vec *bvec;
@@ -505,7 +503,7 @@ static int __bio_copy_iov(struct bio *bio, struct sg_iovec *iov, int iov_count,
 
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		char *bv_addr = page_address(bvec->bv_page);
-		unsigned int bv_len = bvec->bv_len;
+		unsigned int bv_len = iovecs[i].bv_len;
 
 		while (bv_len && iov_idx < iov_count) {
 			unsigned int bytes;
@@ -557,7 +555,7 @@ int bio_uncopy_user(struct bio *bio)
 	struct bio_map_data *bmd = bio->bi_private;
 	int ret;
 
-	ret = __bio_copy_iov(bio, bmd->sgvecs, bmd->nr_sgvecs, 1);
+	ret = __bio_copy_iov(bio, bmd->iovecs, bmd->sgvecs, bmd->nr_sgvecs, 1);
 
 	bio_free_map_data(bmd);
 	bio_put(bio);
@@ -599,7 +597,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, struct sg_iovec *iov,
 		len += iov[i].iov_len;
 	}
 
-	bmd = bio_alloc_map_data(nr_pages, iov_count);
+	bmd = bio_alloc_map_data(nr_pages, iov_count, GFP_KERNEL);
 	if (!bmd)
 		return ERR_PTR(-ENOMEM);
 
@@ -636,7 +634,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, struct sg_iovec *iov,
 	 * success
 	 */
 	if (!write_to_vm) {
-		ret = __bio_copy_iov(bio, iov, iov_count, 0);
+		ret = __bio_copy_iov(bio, bio->bi_io_vec, iov, iov_count, 0);
 		if (ret)
 			goto cleanup;
 	}
@@ -945,19 +943,22 @@ static void bio_copy_kern_endio(struct bio *bio, int err)
 {
 	struct bio_vec *bvec;
 	const int read = bio_data_dir(bio) == READ;
-	char *p = bio->bi_private;
+	struct bio_map_data *bmd = bio->bi_private;
 	int i;
+	char *p = bmd->sgvecs[0].iov_base;
 
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		char *addr = page_address(bvec->bv_page);
+		int len = bmd->iovecs[i].bv_len;
 
 		if (read && !err)
-			memcpy(p, addr, bvec->bv_len);
+			memcpy(p, addr, len);
 
 		__free_page(bvec->bv_page);
-		p += bvec->bv_len;
+		p += len;
 	}
 
+	bio_free_map_data(bmd);
 	bio_put(bio);
 }
 
@@ -981,11 +982,21 @@ struct bio *bio_copy_kern(struct request_queue *q, void *data, unsigned int len,
 	const int nr_pages = end - start;
 	struct bio *bio;
 	struct bio_vec *bvec;
+	struct bio_map_data *bmd;
 	int i, ret;
+	struct sg_iovec iov;
+
+	iov.iov_base = data;
+	iov.iov_len = len;
+
+	bmd = bio_alloc_map_data(nr_pages, 1, gfp_mask);
+	if (!bmd)
+		return ERR_PTR(-ENOMEM);
 
+	ret = -ENOMEM;
 	bio = bio_alloc(gfp_mask, nr_pages);
 	if (!bio)
-		return ERR_PTR(-ENOMEM);
+		goto out_bmd;
 
 	while (len) {
 		struct page *page;
@@ -1019,14 +1030,18 @@ struct bio *bio_copy_kern(struct request_queue *q, void *data, unsigned int len,
 		}
 	}
 
-	bio->bi_private = data;
+	bio->bi_private = bmd;
 	bio->bi_end_io = bio_copy_kern_endio;
+
+	bio_set_map_data(bmd, bio, &iov, 1);
 	return bio;
 cleanup:
 	bio_for_each_segment(bvec, bio, i)
 		__free_page(bvec->bv_page);
 
 	bio_put(bio);
+out_bmd:
+	bio_free_map_data(bmd);
 
 	return ERR_PTR(ret);
 }
diff --git a/fs/block_dev.c b/fs/block_dev.c
index dcf37cada36..aff54219e04 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -941,8 +941,10 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part)
 	 * hooks: /n/, see "layering violations".
 	 */
 	ret = devcgroup_inode_permission(bdev->bd_inode, perm);
-	if (ret != 0)
+	if (ret != 0) {
+		bdput(bdev);
 		return ret;
+	}
 
 	ret = -ENXIO;
 	file->f_mapping = bdev->bd_inode->i_mapping;
@@ -1234,6 +1236,7 @@ fail:
 	bdev = ERR_PTR(error);
 	goto out;
 }
+EXPORT_SYMBOL(lookup_bdev);
 
 /**
  * open_bdev_excl  -  open a block device by name and set it up for use
diff --git a/fs/buffer.c b/fs/buffer.c
index ca12a6bb82b..ac78d4c19b3 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -580,7 +580,7 @@ EXPORT_SYMBOL(mark_buffer_async_write);
 /*
  * The buffer's backing address_space's private_lock must be held
  */
-static inline void __remove_assoc_queue(struct buffer_head *bh)
+static void __remove_assoc_queue(struct buffer_head *bh)
 {
 	list_del_init(&bh->b_assoc_buffers);
 	WARN_ON(!bh->b_assoc_map);
@@ -1720,7 +1720,7 @@ static int __block_write_full_page(struct inode *inode, struct page *page,
 		 */
 		if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) {
 			lock_buffer(bh);
-		} else if (test_set_buffer_locked(bh)) {
+		} else if (!trylock_buffer(bh)) {
 			redirty_page_for_writepage(wbc, page);
 			continue;
 		}
@@ -2926,14 +2926,17 @@ int submit_bh(int rw, struct buffer_head * bh)
 	BUG_ON(!buffer_mapped(bh));
 	BUG_ON(!bh->b_end_io);
 
-	if (buffer_ordered(bh) && (rw == WRITE))
-		rw = WRITE_BARRIER;
+	/*
+	 * Mask in barrier bit for a write (could be either a WRITE or a
+	 * WRITE_SYNC
+	 */
+	if (buffer_ordered(bh) && (rw & WRITE))
+		rw |= WRITE_BARRIER;
 
 	/*
-	 * Only clear out a write error when rewriting, should this
-	 * include WRITE_SYNC as well?
+	 * Only clear out a write error when rewriting
 	 */
-	if (test_set_buffer_req(bh) && (rw == WRITE || rw == WRITE_BARRIER))
+	if (test_set_buffer_req(bh) && (rw & WRITE))
 		clear_buffer_write_io_error(bh);
 
 	/*
@@ -3000,7 +3003,7 @@ void ll_rw_block(int rw, int nr, struct buffer_head *bhs[])
 
 		if (rw == SWRITE || rw == SWRITE_SYNC)
 			lock_buffer(bh);
-		else if (test_set_buffer_locked(bh))
+		else if (!trylock_buffer(bh))
 			continue;
 
 		if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC) {
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 1f3465201fd..06e521a945c 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,19 @@
+Version 1.54
+------------
+Fix premature write failure on congested networks (we would give up
+on EAGAIN from the socket too quickly on large writes).
+Cifs_mkdir and cifs_create now respect the setgid bit on parent dir.
+Fix endian problems in acl (mode from/to cifs acl) on bigendian
+architectures.  Fix problems with preserving timestamps on copying open
+files (e.g. "cp -a") to Windows servers.  For mkdir and create honor setgid bit
+on parent directory when server supports Unix Extensions but not POSIX
+create. Update cifs.upcall version to handle new Kerberos sec flags
+(this requires update of cifs.upcall program from Samba).  Fix memory leak
+on dns_upcall (resolving DFS referralls).  Fix plain text password
+authentication (requires setting SecurityFlags to 0x30030 to enable
+lanman and plain text though).  Fix writes to be at correct offset when
+file is open with O_APPEND and file is on a directio (forcediretio) mount.
+
 Version 1.53
 ------------
 DFS support added (Microsoft Distributed File System client support needed
diff --git a/fs/cifs/README b/fs/cifs/README
index 2bd6fe556f8..bd2343d4c6a 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -542,10 +542,20 @@ SecurityFlags		Flags which control security negotiation and
 			hashing mechanisms (as "must use") on the other hand 
 			does not make much sense. Default flags are 
 				0x07007 
-			(NTLM, NTLMv2 and packet signing allowed).  Maximum 
+			(NTLM, NTLMv2 and packet signing allowed).  The maximum 
 			allowable flags if you want to allow mounts to servers
 			using weaker password hashes is 0x37037 (lanman,
-			plaintext, ntlm, ntlmv2, signing allowed):
+			plaintext, ntlm, ntlmv2, signing allowed).  Some
+			SecurityFlags require the corresponding menuconfig
+			options to be enabled (lanman and plaintext require
+			CONFIG_CIFS_WEAK_PW_HASH for example).  Enabling
+			plaintext authentication currently requires also
+			enabling lanman authentication in the security flags
+			because the cifs module only supports sending
+			laintext passwords using the older lanman dialect
+			form of the session setup SMB.  (e.g. for authentication
+			using plain text passwords, set the SecurityFlags
+			to 0x30030):
  
 			may use packet signing 				0x00001
 			must use packet signing				0x01001
@@ -642,8 +652,30 @@ The statistics for the number of total SMBs and oplock breaks are different in
 that they represent all for that share, not just those for which the server
 returned success.
 	
-Also note that "cat /proc/fs/cifs/DebugData" will display information about 
+Also note that "cat /proc/fs/cifs/DebugData" will display information about
 the active sessions and the shares that are mounted.
-Enabling Kerberos (extended security) works when CONFIG_CIFS_EXPERIMENTAL is
-on but requires a user space helper (from the Samba project). NTLM and NTLMv2 and
-LANMAN support do not require this helper.
+
+Enabling Kerberos (extended security) works but requires version 1.2 or later
+of the helper program cifs.upcall to be present and to be configured in the
+/etc/request-key.conf file.  The cifs.upcall helper program is from the Samba
+project(http://www.samba.org). NTLM and NTLMv2 and LANMAN support do not
+require this helper. Note that NTLMv2 security (which does not require the
+cifs.upcall helper program), instead of using Kerberos, is sufficient for
+some use cases.
+
+Enabling DFS support (used to access shares transparently in an MS-DFS
+global name space) requires that CONFIG_CIFS_EXPERIMENTAL be enabled.  In
+addition, DFS support for target shares which are specified as UNC
+names which begin with host names (rather than IP addresses) requires
+a user space helper (such as cifs.upcall) to be present in order to
+translate host names to ip address, and the user space helper must also
+be configured in the file /etc/request-key.conf
+
+To use cifs Kerberos and DFS support, the Linux keyutils package should be
+installed and something like the following lines should be added to the
+/etc/request-key.conf file:
+
+create cifs.spnego * * /usr/local/sbin/cifs.upcall %k
+create dns_resolver * * /usr/local/sbin/cifs.upcall %k
+
+
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 6bb440b257b..1b09f167006 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -476,6 +476,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 	unsigned int cls, con, tag, oidlen, rc;
 	bool use_ntlmssp = false;
 	bool use_kerberos = false;
+	bool use_mskerberos = false;
 
 	*secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/
 
@@ -483,6 +484,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 
 	asn1_open(&ctx, security_blob, length);
 
+	/* GSSAPI header */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding negTokenInit header"));
 		return 0;
@@ -490,156 +492,149 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 		   || (tag != ASN1_EOC)) {
 		cFYI(1, ("cls = %d con = %d tag = %d", cls, con, tag));
 		return 0;
-	} else {
-		/*      remember to free obj->oid */
-		rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
-		if (rc) {
-			if ((tag == ASN1_OJI) && (con == ASN1_PRI)) {
-				rc = asn1_oid_decode(&ctx, end, &oid, &oidlen);
-				if (rc) {
-					rc = compare_oid(oid, oidlen,
-							 SPNEGO_OID,
-							 SPNEGO_OID_LEN);
-					kfree(oid);
-				}
-			} else
-				rc = 0;
-		}
+	}
 
-		if (!rc) {
-			cFYI(1, ("Error decoding negTokenInit header"));
-			return 0;
-		}
+	/* Check for SPNEGO OID -- remember to free obj->oid */
+	rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
+	if (rc) {
+		if ((tag == ASN1_OJI) && (con == ASN1_PRI) &&
+		    (cls == ASN1_UNI)) {
+			rc = asn1_oid_decode(&ctx, end, &oid, &oidlen);
+			if (rc) {
+				rc = compare_oid(oid, oidlen, SPNEGO_OID,
+						 SPNEGO_OID_LEN);
+				kfree(oid);
+			}
+		} else
+			rc = 0;
+	}
 
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1, ("Error decoding negTokenInit"));
-			return 0;
-		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
-			   || (tag != ASN1_EOC)) {
-			cFYI(1,
-			     ("cls = %d con = %d tag = %d end = %p (%d) exit 0",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
+	/* SPNEGO OID not present or garbled -- bail out */
+	if (!rc) {
+		cFYI(1, ("Error decoding negTokenInit header"));
+		return 0;
+	}
 
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1, ("Error decoding negTokenInit"));
-			return 0;
-		} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
-			   || (tag != ASN1_SEQ)) {
-			cFYI(1,
-			     ("cls = %d con = %d tag = %d end = %p (%d) exit 1",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding negTokenInit"));
+		return 0;
+	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
+		   || (tag != ASN1_EOC)) {
+		cFYI(1,
+		     ("cls = %d con = %d tag = %d end = %p (%d) exit 0",
+		      cls, con, tag, end, *end));
+		return 0;
+	}
 
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1, ("Error decoding 2nd part of negTokenInit"));
-			return 0;
-		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
-			   || (tag != ASN1_EOC)) {
-			cFYI(1,
-			     ("cls = %d con = %d tag = %d end = %p (%d) exit 0",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding negTokenInit"));
+		return 0;
+	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
+		   || (tag != ASN1_SEQ)) {
+		cFYI(1,
+		     ("cls = %d con = %d tag = %d end = %p (%d) exit 1",
+		      cls, con, tag, end, *end));
+		return 0;
+	}
 
-		if (asn1_header_decode
-		    (&ctx, &sequence_end, &cls, &con, &tag) == 0) {
-			cFYI(1, ("Error decoding 2nd part of negTokenInit"));
-			return 0;
-		} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
-			   || (tag != ASN1_SEQ)) {
-			cFYI(1,
-			     ("cls = %d con = %d tag = %d end = %p (%d) exit 1",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding 2nd part of negTokenInit"));
+		return 0;
+	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
+		   || (tag != ASN1_EOC)) {
+		cFYI(1,
+		     ("cls = %d con = %d tag = %d end = %p (%d) exit 0",
+		      cls, con, tag, end, *end));
+		return 0;
+	}
 
-		while (!asn1_eoc_decode(&ctx, sequence_end)) {
-			rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
-			if (!rc) {
-				cFYI(1,
-				     ("Error decoding negTokenInit hdr exit2"));
-				return 0;
-			}
-			if ((tag == ASN1_OJI) && (con == ASN1_PRI)) {
-				if (asn1_oid_decode(&ctx, end, &oid, &oidlen)) {
-
-					cFYI(1,
-					  ("OID len = %d oid = 0x%lx 0x%lx "
-					   "0x%lx 0x%lx",
-					   oidlen, *oid, *(oid + 1),
-					   *(oid + 2), *(oid + 3)));
-
-					if (compare_oid(oid, oidlen,
-							MSKRB5_OID,
-							MSKRB5_OID_LEN))
-						use_kerberos = true;
-					else if (compare_oid(oid, oidlen,
-							     KRB5_OID,
-							     KRB5_OID_LEN))
-						use_kerberos = true;
-					else if (compare_oid(oid, oidlen,
-							     NTLMSSP_OID,
-							     NTLMSSP_OID_LEN))
-						use_ntlmssp = true;
-
-					kfree(oid);
-				}
-			} else {
-				cFYI(1, ("Should be an oid what is going on?"));
-			}
-		}
+	if (asn1_header_decode
+	    (&ctx, &sequence_end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding 2nd part of negTokenInit"));
+		return 0;
+	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
+		   || (tag != ASN1_SEQ)) {
+		cFYI(1,
+		     ("cls = %d con = %d tag = %d end = %p (%d) exit 1",
+		      cls, con, tag, end, *end));
+		return 0;
+	}
 
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1,
-			     ("Error decoding last part negTokenInit exit3"));
-			return 0;
-		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
-			/* tag = 3 indicating mechListMIC */
+	while (!asn1_eoc_decode(&ctx, sequence_end)) {
+		rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
+		if (!rc) {
 			cFYI(1,
-			     ("Exit 4 cls = %d con = %d tag = %d end = %p (%d)",
-			      cls, con, tag, end, *end));
+			     ("Error decoding negTokenInit hdr exit2"));
 			return 0;
 		}
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1,
-			     ("Error decoding last part negTokenInit exit5"));
-			return 0;
-		} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
-			   || (tag != ASN1_SEQ)) {
-			cFYI(1, ("cls = %d con = %d tag = %d end = %p (%d)",
-				cls, con, tag, end, *end));
+		if ((tag == ASN1_OJI) && (con == ASN1_PRI)) {
+			if (asn1_oid_decode(&ctx, end, &oid, &oidlen)) {
+
+				cFYI(1, ("OID len = %d oid = 0x%lx 0x%lx "
+					 "0x%lx 0x%lx", oidlen, *oid,
+					 *(oid + 1), *(oid + 2), *(oid + 3)));
+
+				if (compare_oid(oid, oidlen, MSKRB5_OID,
+						MSKRB5_OID_LEN) &&
+						!use_kerberos)
+					use_mskerberos = true;
+				else if (compare_oid(oid, oidlen, KRB5_OID,
+						     KRB5_OID_LEN) &&
+						     !use_mskerberos)
+					use_kerberos = true;
+				else if (compare_oid(oid, oidlen, NTLMSSP_OID,
+						     NTLMSSP_OID_LEN))
+					use_ntlmssp = true;
+
+				kfree(oid);
+			}
+		} else {
+			cFYI(1, ("Should be an oid what is going on?"));
 		}
+	}
 
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1,
-			     ("Error decoding last part negTokenInit exit 7"));
-			return 0;
-		} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
-			cFYI(1,
-			     ("Exit 8 cls = %d con = %d tag = %d end = %p (%d)",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
-		if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-			cFYI(1,
-			     ("Error decoding last part negTokenInit exit9"));
-			return 0;
-		} else if ((cls != ASN1_UNI) || (con != ASN1_PRI)
-			   || (tag != ASN1_GENSTR)) {
-			cFYI(1,
-			     ("Exit10 cls = %d con = %d tag = %d end = %p (%d)",
-			      cls, con, tag, end, *end));
-			return 0;
-		}
-		cFYI(1, ("Need to call asn1_octets_decode() function for %s",
-			 ctx.pointer));	/* is this UTF-8 or ASCII? */
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding last part negTokenInit exit3"));
+		return 0;
+	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
+		/* tag = 3 indicating mechListMIC */
+		cFYI(1, ("Exit 4 cls = %d con = %d tag = %d end = %p (%d)",
+			 cls, con, tag, end, *end));
+		return 0;
+	}
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding last part negTokenInit exit5"));
+		return 0;
+	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
+		   || (tag != ASN1_SEQ)) {
+		cFYI(1, ("cls = %d con = %d tag = %d end = %p (%d)",
+			cls, con, tag, end, *end));
+	}
+
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding last part negTokenInit exit 7"));
+		return 0;
+	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
+		cFYI(1, ("Exit 8 cls = %d con = %d tag = %d end = %p (%d)",
+			 cls, con, tag, end, *end));
+		return 0;
+	}
+	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		cFYI(1, ("Error decoding last part negTokenInit exit9"));
+		return 0;
+	} else if ((cls != ASN1_UNI) || (con != ASN1_PRI)
+		   || (tag != ASN1_GENSTR)) {
+		cFYI(1, ("Exit10 cls = %d con = %d tag = %d end = %p (%d)",
+			 cls, con, tag, end, *end));
+		return 0;
 	}
+	cFYI(1, ("Need to call asn1_octets_decode() function for %s",
+		 ctx.pointer));	/* is this UTF-8 or ASCII? */
 
 	if (use_kerberos)
 		*secType = Kerberos;
+	else if (use_mskerberos)
+		*secType = MSKerberos;
 	else if (use_ntlmssp)
 		*secType = NTLMSSP;
 
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 688a2d42153..69a12aae91d 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -79,27 +79,25 @@ void cifs_dump_mids(struct TCP_Server_Info *server)
 	spin_lock(&GlobalMid_Lock);
 	list_for_each(tmp, &server->pending_mid_q) {
 		mid_entry = list_entry(tmp, struct mid_q_entry, qhead);
-		if (mid_entry) {
-			cERROR(1, ("State: %d Cmd: %d Pid: %d Tsk: %p Mid %d",
-				mid_entry->midState,
-				(int)mid_entry->command,
-				mid_entry->pid,
-				mid_entry->tsk,
-				mid_entry->mid));
+		cERROR(1, ("State: %d Cmd: %d Pid: %d Tsk: %p Mid %d",
+			mid_entry->midState,
+			(int)mid_entry->command,
+			mid_entry->pid,
+			mid_entry->tsk,
+			mid_entry->mid));
 #ifdef CONFIG_CIFS_STATS2
-			cERROR(1, ("IsLarge: %d buf: %p time rcv: %ld now: %ld",
-				mid_entry->largeBuf,
-				mid_entry->resp_buf,
-				mid_entry->when_received,
-				jiffies));
+		cERROR(1, ("IsLarge: %d buf: %p time rcv: %ld now: %ld",
+			mid_entry->largeBuf,
+			mid_entry->resp_buf,
+			mid_entry->when_received,
+			jiffies));
 #endif /* STATS2 */
-			cERROR(1, ("IsMult: %d IsEnd: %d", mid_entry->multiRsp,
-				  mid_entry->multiEnd));
-			if (mid_entry->resp_buf) {
-				cifs_dump_detail(mid_entry->resp_buf);
-				cifs_dump_mem("existing buf: ",
-					mid_entry->resp_buf, 62);
-			}
+		cERROR(1, ("IsMult: %d IsEnd: %d", mid_entry->multiRsp,
+			  mid_entry->multiEnd));
+		if (mid_entry->resp_buf) {
+			cifs_dump_detail(mid_entry->resp_buf);
+			cifs_dump_mem("existing buf: ",
+				mid_entry->resp_buf, 62);
 		}
 	}
 	spin_unlock(&GlobalMid_Lock);
@@ -163,16 +161,13 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v)
 				mid_entry = list_entry(tmp1, struct
 					mid_q_entry,
 					qhead);
-				if (mid_entry) {
-					seq_printf(m,
-							"State: %d com: %d pid:"
-							" %d tsk: %p mid %d\n",
-							mid_entry->midState,
-							(int)mid_entry->command,
-							mid_entry->pid,
-							mid_entry->tsk,
-							mid_entry->mid);
-				}
+				seq_printf(m, "State: %d com: %d pid:"
+						" %d tsk: %p mid %d\n",
+						mid_entry->midState,
+						(int)mid_entry->command,
+						mid_entry->pid,
+						mid_entry->tsk,
+						mid_entry->mid);
 			}
 			spin_unlock(&GlobalMid_Lock);
 		}
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index d82374c9e32..d2c8eef84f3 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -226,7 +226,7 @@ static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd,
 	int err;
 
 	mntget(newmnt);
-	err = do_add_mount(newmnt, nd, nd->path.mnt->mnt_flags, mntlist);
+	err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist);
 	switch (err) {
 	case 0:
 		path_put(&nd->path);
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 7013aaff6ae..117ef4bba68 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -66,8 +66,8 @@ struct key_type cifs_spnego_key_type = {
 	.describe	= user_describe,
 };
 
-#define MAX_VER_STR_LEN   9 /* length of longest version string e.g.
-				strlen(";ver=0xFF") */
+#define MAX_VER_STR_LEN   8 /* length of longest version string e.g.
+				strlen("ver=0xFF") */
 #define MAX_MECH_STR_LEN 13 /* length of longest security mechanism name, eg
 			       in future could have strlen(";sec=ntlmsspi") */
 #define MAX_IPV6_ADDR_LEN 42 /* eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/60 */
@@ -81,11 +81,15 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 	struct key *spnego_key;
 	const char *hostname = server->hostname;
 
-	/* BB: come up with better scheme for determining length */
-	/* length of fields (with semicolons): ver=0xyz ipv4= ipaddress host=
-	   hostname sec=mechanism uid=0x uid */
-	desc_len = MAX_VER_STR_LEN + 5 + MAX_IPV6_ADDR_LEN + 1 + 6 +
-		  strlen(hostname) + MAX_MECH_STR_LEN + 8 + (sizeof(uid_t) * 2);
+	/* length of fields (with semicolons): ver=0xyz ip4=ipaddress
+	   host=hostname sec=mechanism uid=0xFF user=username */
+	desc_len = MAX_VER_STR_LEN +
+		   6 /* len of "host=" */ + strlen(hostname) +
+		   5 /* len of ";ipv4=" */ + MAX_IPV6_ADDR_LEN +
+		   MAX_MECH_STR_LEN +
+		   7 /* len of ";uid=0x" */ + (sizeof(uid_t) * 2) +
+		   6 /* len of ";user=" */ + strlen(sesInfo->userName) + 1;
+
 	spnego_key = ERR_PTR(-ENOMEM);
 	description = kzalloc(desc_len, GFP_KERNEL);
 	if (description == NULL)
@@ -110,9 +114,11 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 
 	dp = description + strlen(description);
 
-	/* for now, only sec=krb5 is valid */
+	/* for now, only sec=krb5 and sec=mskrb5 are valid */
 	if (server->secType == Kerberos)
 		sprintf(dp, ";sec=krb5");
+	else if (server->secType == MSKerberos)
+		sprintf(dp, ";sec=mskrb5");
 	else
 		goto out;
 
diff --git a/fs/cifs/cifs_spnego.h b/fs/cifs/cifs_spnego.h
index 05a34b17a1a..e4041ec4d71 100644
--- a/fs/cifs/cifs_spnego.h
+++ b/fs/cifs/cifs_spnego.h
@@ -23,7 +23,7 @@
 #ifndef _CIFS_SPNEGO_H
 #define _CIFS_SPNEGO_H
 
-#define CIFS_SPNEGO_UPCALL_VERSION 1
+#define CIFS_SPNEGO_UPCALL_VERSION 2
 
 /*
  * The version field should always be set to CIFS_SPNEGO_UPCALL_VERSION.
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 83fd40dc1ef..bd5f13d3845 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -294,6 +294,7 @@ void calc_lanman_hash(struct cifsSesInfo *ses, char *lnm_session_key)
 
 	if ((ses->server->secMode & SECMODE_PW_ENCRYPT) == 0)
 		if (extended_security & CIFSSEC_MAY_PLNTXT) {
+			memset(lnm_session_key, 0, CIFS_SESS_KEY_SIZE);
 			memcpy(lnm_session_key, password_with_pad,
 				CIFS_ENCPWD_SIZE);
 			return;
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 1ec7076f7b2..25ecbd5b040 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -175,6 +175,8 @@ out_no_root:
 	if (inode)
 		iput(inode);
 
+	cifs_umount(sb, cifs_sb);
+
 out_mount_failed:
 	if (cifs_sb) {
 #ifdef CONFIG_CIFS_DFS_UPCALL
@@ -930,36 +932,34 @@ static int cifs_oplock_thread(void *dummyarg)
 			schedule_timeout(39*HZ);
 		} else {
 			oplock_item = list_entry(GlobalOplock_Q.next,
-				struct oplock_q_entry, qhead);
-			if (oplock_item) {
-				cFYI(1, ("found oplock item to write out"));
-				pTcon = oplock_item->tcon;
-				inode = oplock_item->pinode;
-				netfid = oplock_item->netfid;
-				spin_unlock(&GlobalMid_Lock);
-				DeleteOplockQEntry(oplock_item);
-				/* can not grab inode sem here since it would
+						struct oplock_q_entry, qhead);
+			cFYI(1, ("found oplock item to write out"));
+			pTcon = oplock_item->tcon;
+			inode = oplock_item->pinode;
+			netfid = oplock_item->netfid;
+			spin_unlock(&GlobalMid_Lock);
+			DeleteOplockQEntry(oplock_item);
+			/* can not grab inode sem here since it would
 				deadlock when oplock received on delete
 				since vfs_unlink holds the i_mutex across
 				the call */
-				/* mutex_lock(&inode->i_mutex);*/
-				if (S_ISREG(inode->i_mode)) {
-					rc =
-					   filemap_fdatawrite(inode->i_mapping);
-					if (CIFS_I(inode)->clientCanCacheRead
-									 == 0) {
-						waitrc = filemap_fdatawait(inode->i_mapping);
-						invalidate_remote_inode(inode);
-					}
-					if (rc == 0)
-						rc = waitrc;
-				} else
-					rc = 0;
-				/* mutex_unlock(&inode->i_mutex);*/
-				if (rc)
-					CIFS_I(inode)->write_behind_rc = rc;
-				cFYI(1, ("Oplock flush inode %p rc %d",
-					inode, rc));
+			/* mutex_lock(&inode->i_mutex);*/
+			if (S_ISREG(inode->i_mode)) {
+				rc = filemap_fdatawrite(inode->i_mapping);
+				if (CIFS_I(inode)->clientCanCacheRead == 0) {
+					waitrc = filemap_fdatawait(
+							      inode->i_mapping);
+					invalidate_remote_inode(inode);
+				}
+				if (rc == 0)
+					rc = waitrc;
+			} else
+				rc = 0;
+			/* mutex_unlock(&inode->i_mutex);*/
+			if (rc)
+				CIFS_I(inode)->write_behind_rc = rc;
+			cFYI(1, ("Oplock flush inode %p rc %d",
+				inode, rc));
 
 				/* releasing stale oplock after recent reconnect
 				of smb session using a now incorrect file
@@ -967,15 +967,13 @@ static int cifs_oplock_thread(void *dummyarg)
 				not bother sending an oplock release if session
 				to server still is disconnected since oplock
 				already released by the server in that case */
-				if (pTcon->tidStatus != CifsNeedReconnect) {
-				    rc = CIFSSMBLock(0, pTcon, netfid,
-					    0 /* len */ , 0 /* offset */, 0,
-					    0, LOCKING_ANDX_OPLOCK_RELEASE,
-					    false /* wait flag */);
-					cFYI(1, ("Oplock release rc = %d", rc));
-				}
-			} else
-				spin_unlock(&GlobalMid_Lock);
+			if (pTcon->tidStatus != CifsNeedReconnect) {
+				rc = CIFSSMBLock(0, pTcon, netfid,
+						0 /* len */ , 0 /* offset */, 0,
+						0, LOCKING_ANDX_OPLOCK_RELEASE,
+						false /* wait flag */);
+				cFYI(1, ("Oplock release rc = %d", rc));
+			}
 			set_current_state(TASK_INTERRUPTIBLE);
 			schedule_timeout(1);  /* yield in case q were corrupt */
 		}
@@ -1001,8 +999,7 @@ static int cifs_dnotify_thread(void *dummyarg)
 		list_for_each(tmp, &GlobalSMBSessionList) {
 			ses = list_entry(tmp, struct cifsSesInfo,
 				cifsSessionList);
-			if (ses && ses->server &&
-			     atomic_read(&ses->server->inFlight))
+			if (ses->server && atomic_read(&ses->server->inFlight))
 				wake_up_all(&ses->server->response_q);
 		}
 		read_unlock(&GlobalSMBSeslock);
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 25a6cbd1552..135c965c413 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -101,5 +101,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.53"
+#define CIFS_VERSION   "1.54"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 7e1cf262eff..8dfd6f24d48 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -80,7 +80,8 @@ enum securityEnum {
 	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
 	RawNTLMSSP,		/* NTLMSSP without SPNEGO */
 	NTLMSSP,		/* NTLMSSP via SPNEGO */
-	Kerberos		/* Kerberos via SPNEGO */
+	Kerberos,		/* Kerberos via SPNEGO */
+	MSKerberos,		/* MS Kerberos via SPNEGO */
 };
 
 enum protocolEnum {
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index 409abce1273..d2a073edd1b 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -262,7 +262,7 @@
  */
 #define CIFS_NO_HANDLE        0xFFFF
 
-#define NO_CHANGE_64          cpu_to_le64(0xFFFFFFFFFFFFFFFFULL)
+#define NO_CHANGE_64          0xFFFFFFFFFFFFFFFFULL
 #define NO_CHANGE_32          0xFFFFFFFFUL
 
 /* IPC$ in ASCII */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index b9f5e935f82..a729d083e6f 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -172,12 +172,13 @@ extern int CIFSSMBQFSUnixInfo(const int xid, struct cifsTconInfo *tcon);
 extern int CIFSSMBQFSPosixInfo(const int xid, struct cifsTconInfo *tcon,
 			struct kstatfs *FSData);
 
-extern int CIFSSMBSetTimes(const int xid, struct cifsTconInfo *tcon,
+extern int CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon,
 			const char *fileName, const FILE_BASIC_INFO *data,
 			const struct nls_table *nls_codepage,
 			int remap_special_chars);
-extern int CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon,
-			const FILE_BASIC_INFO *data, __u16 fid);
+extern int CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon,
+			const FILE_BASIC_INFO *data, __u16 fid,
+			__u32 pid_of_opener);
 #if 0
 extern int CIFSSMBSetAttrLegacy(int xid, struct cifsTconInfo *tcon,
 			char *fileName, __u16 dos_attributes,
@@ -191,9 +192,20 @@ extern int CIFSSMBSetEOF(const int xid, struct cifsTconInfo *tcon,
 extern int CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon,
 			 __u64 size, __u16 fileHandle, __u32 opener_pid,
 			bool AllocSizeFlag);
-extern int CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *pTcon,
-			char *full_path, __u64 mode, __u64 uid,
-			__u64 gid, dev_t dev,
+
+struct cifs_unix_set_info_args {
+	__u64	ctime;
+	__u64	atime;
+	__u64	mtime;
+	__u64	mode;
+	__u64	uid;
+	__u64	gid;
+	dev_t	device;
+};
+
+extern int CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *pTcon,
+			char *fileName,
+			const struct cifs_unix_set_info_args *args,
 			const struct nls_table *nls_codepage,
 			int remap_special_chars);
 
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index c621ffa2ca9..994de7c9047 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -128,8 +128,7 @@ static void mark_open_files_invalid(struct cifsTconInfo *pTcon)
 	write_lock(&GlobalSMBSeslock);
 	list_for_each_safe(tmp, tmp1, &pTcon->openFileList) {
 		open_file = list_entry(tmp, struct cifsFileInfo, tlist);
-		if (open_file)
-			open_file->invalidHandle = true;
+		open_file->invalidHandle = true;
 	}
 	write_unlock(&GlobalSMBSeslock);
 	/* BB Add call to invalidate_inodes(sb) for all superblocks mounted
@@ -4816,8 +4815,8 @@ CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size,
    time and resort to the original setpathinfo level which takes the ancient
    DOS time format with 2 second granularity */
 int
-CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon,
-		    const FILE_BASIC_INFO *data, __u16 fid)
+CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon,
+		    const FILE_BASIC_INFO *data, __u16 fid, __u32 pid_of_opener)
 {
 	struct smb_com_transaction2_sfi_req *pSMB  = NULL;
 	char *data_offset;
@@ -4830,11 +4829,8 @@ CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon,
 	if (rc)
 		return rc;
 
-	/* At this point there is no need to override the current pid
-	with the pid of the opener, but that could change if we someday
-	use an existing handle (rather than opening one on the fly) */
-	/* pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener);
-	pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16));*/
+	pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener);
+	pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16));
 
 	params = 6;
 	pSMB->MaxSetupCount = 0;
@@ -4882,9 +4878,9 @@ CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon,
 
 
 int
-CIFSSMBSetTimes(const int xid, struct cifsTconInfo *tcon, const char *fileName,
-		const FILE_BASIC_INFO *data,
-		const struct nls_table *nls_codepage, int remap)
+CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon,
+		   const char *fileName, const FILE_BASIC_INFO *data,
+		   const struct nls_table *nls_codepage, int remap)
 {
 	TRANSACTION2_SPI_REQ *pSMB = NULL;
 	TRANSACTION2_SPI_RSP *pSMBr = NULL;
@@ -5013,10 +5009,9 @@ SetAttrLgcyRetry:
 #endif /* temporarily unneeded SetAttr legacy function */
 
 int
-CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *tcon,
-		    char *fileName, __u64 mode, __u64 uid, __u64 gid,
-		    dev_t device, const struct nls_table *nls_codepage,
-		    int remap)
+CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *tcon, char *fileName,
+		   const struct cifs_unix_set_info_args *args,
+		   const struct nls_table *nls_codepage, int remap)
 {
 	TRANSACTION2_SPI_REQ *pSMB = NULL;
 	TRANSACTION2_SPI_RSP *pSMBr = NULL;
@@ -5025,6 +5020,7 @@ CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *tcon,
 	int bytes_returned = 0;
 	FILE_UNIX_BASIC_INFO *data_offset;
 	__u16 params, param_offset, offset, count, byte_count;
+	__u64 mode = args->mode;
 
 	cFYI(1, ("In SetUID/GID/Mode"));
 setPermsRetry:
@@ -5080,16 +5076,16 @@ setPermsRetry:
 	set file size and do not want to truncate file size to zero
 	accidently as happened on one Samba server beta by putting
 	zero instead of -1 here */
-	data_offset->EndOfFile = NO_CHANGE_64;
-	data_offset->NumOfBytes = NO_CHANGE_64;
-	data_offset->LastStatusChange = NO_CHANGE_64;
-	data_offset->LastAccessTime = NO_CHANGE_64;
-	data_offset->LastModificationTime = NO_CHANGE_64;
-	data_offset->Uid = cpu_to_le64(uid);
-	data_offset->Gid = cpu_to_le64(gid);
+	data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64);
+	data_offset->NumOfBytes = cpu_to_le64(NO_CHANGE_64);
+	data_offset->LastStatusChange = cpu_to_le64(args->ctime);
+	data_offset->LastAccessTime = cpu_to_le64(args->atime);
+	data_offset->LastModificationTime = cpu_to_le64(args->mtime);
+	data_offset->Uid = cpu_to_le64(args->uid);
+	data_offset->Gid = cpu_to_le64(args->gid);
 	/* better to leave device as zero when it is  */
-	data_offset->DevMajor = cpu_to_le64(MAJOR(device));
-	data_offset->DevMinor = cpu_to_le64(MINOR(device));
+	data_offset->DevMajor = cpu_to_le64(MAJOR(args->device));
+	data_offset->DevMinor = cpu_to_le64(MINOR(args->device));
 	data_offset->Permissions = cpu_to_le64(mode);
 
 	if (S_ISREG(mode))
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index b51d5777cde..4c13bcdb92a 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -151,7 +151,7 @@ cifs_reconnect(struct TCP_Server_Info *server)
 	}
 	list_for_each(tmp, &GlobalTreeConnectionList) {
 		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
-		if ((tcon) && (tcon->ses) && (tcon->ses->server == server))
+		if ((tcon->ses) && (tcon->ses->server == server))
 			tcon->tidStatus = CifsNeedReconnect;
 	}
 	read_unlock(&GlobalSMBSeslock);
@@ -173,14 +173,12 @@ cifs_reconnect(struct TCP_Server_Info *server)
 		mid_entry = list_entry(tmp, struct
 					mid_q_entry,
 					qhead);
-		if (mid_entry) {
-			if (mid_entry->midState == MID_REQUEST_SUBMITTED) {
+		if (mid_entry->midState == MID_REQUEST_SUBMITTED) {
 				/* Mark other intransit requests as needing
 				   retry so we do not immediately mark the
 				   session bad again (ie after we reconnect
 				   below) as they timeout too */
-				mid_entry->midState = MID_RETRY_NEEDED;
-			}
+			mid_entry->midState = MID_RETRY_NEEDED;
 		}
 	}
 	spin_unlock(&GlobalMid_Lock);
@@ -351,11 +349,9 @@ cifs_demultiplex_thread(struct TCP_Server_Info *server)
 
 	current->flags |= PF_MEMALLOC;
 	cFYI(1, ("Demultiplex PID: %d", task_pid_nr(current)));
-	write_lock(&GlobalSMBSeslock);
-	atomic_inc(&tcpSesAllocCount);
-	length = tcpSesAllocCount.counter;
-	write_unlock(&GlobalSMBSeslock);
-	if (length  > 1)
+
+	length = atomic_inc_return(&tcpSesAllocCount);
+	if (length > 1)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv,
 				GFP_KERNEL);
 
@@ -745,14 +741,11 @@ multi_t2_fnd:
 		coming home not much else we can do but free the memory */
 	}
 
-	write_lock(&GlobalSMBSeslock);
-	atomic_dec(&tcpSesAllocCount);
-	length = tcpSesAllocCount.counter;
-
 	/* last chance to mark ses pointers invalid
 	if there are any pointing to this (e.g
 	if a crazy root user tried to kill cifsd
 	kernel thread explicitly this might happen) */
+	write_lock(&GlobalSMBSeslock);
 	list_for_each(tmp, &GlobalSMBSessionList) {
 		ses = list_entry(tmp, struct cifsSesInfo,
 				cifsSessionList);
@@ -763,6 +756,8 @@ multi_t2_fnd:
 
 	kfree(server->hostname);
 	kfree(server);
+
+	length = atomic_dec_return(&tcpSesAllocCount);
 	if (length  > 0)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv,
 				GFP_KERNEL);
@@ -3603,19 +3598,21 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 	char ntlm_session_key[CIFS_SESS_KEY_SIZE];
 	bool ntlmv2_flag = false;
 	int first_time = 0;
+	struct TCP_Server_Info *server = pSesInfo->server;
 
 	/* what if server changes its buffer size after dropping the session? */
-	if (pSesInfo->server->maxBuf == 0) /* no need to send on reconnect */ {
+	if (server->maxBuf == 0) /* no need to send on reconnect */ {
 		rc = CIFSSMBNegotiate(xid, pSesInfo);
-		if (rc == -EAGAIN) /* retry only once on 1st time connection */ {
+		if (rc == -EAGAIN) {
+			/* retry only once on 1st time connection */
 			rc = CIFSSMBNegotiate(xid, pSesInfo);
 			if (rc == -EAGAIN)
 				rc = -EHOSTDOWN;
 		}
 		if (rc == 0) {
 			spin_lock(&GlobalMid_Lock);
-			if (pSesInfo->server->tcpStatus != CifsExiting)
-				pSesInfo->server->tcpStatus = CifsGood;
+			if (server->tcpStatus != CifsExiting)
+				server->tcpStatus = CifsGood;
 			else
 				rc = -EHOSTDOWN;
 			spin_unlock(&GlobalMid_Lock);
@@ -3623,97 +3620,90 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 		}
 		first_time = 1;
 	}
-	if (!rc) {
-		pSesInfo->flags = 0;
-		pSesInfo->capabilities = pSesInfo->server->capabilities;
-		if (linuxExtEnabled == 0)
-			pSesInfo->capabilities &= (~CAP_UNIX);
+
+	if (rc)
+		goto ss_err_exit;
+
+	pSesInfo->flags = 0;
+	pSesInfo->capabilities = server->capabilities;
+	if (linuxExtEnabled == 0)
+		pSesInfo->capabilities &= (~CAP_UNIX);
 	/*	pSesInfo->sequence_number = 0;*/
-		cFYI(1,
-		      ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
-			pSesInfo->server->secMode,
-			pSesInfo->server->capabilities,
-			pSesInfo->server->timeAdj));
-		if (experimEnabled < 2)
-			rc = CIFS_SessSetup(xid, pSesInfo,
-					    first_time, nls_info);
-		else if (extended_security
-				&& (pSesInfo->capabilities
-					& CAP_EXTENDED_SECURITY)
-				&& (pSesInfo->server->secType == NTLMSSP)) {
-			rc = -EOPNOTSUPP;
-		} else if (extended_security
-			   && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
-			   && (pSesInfo->server->secType == RawNTLMSSP)) {
-			cFYI(1, ("NTLMSSP sesssetup"));
-			rc = CIFSNTLMSSPNegotiateSessSetup(xid,
-						pSesInfo,
-						&ntlmv2_flag,
-						nls_info);
-			if (!rc) {
-				if (ntlmv2_flag) {
-					char *v2_response;
-					cFYI(1, ("more secure NTLM ver2 hash"));
-					if (CalcNTLMv2_partial_mac_key(pSesInfo,
-						nls_info)) {
-						rc = -ENOMEM;
-						goto ss_err_exit;
-					} else
-						v2_response = kmalloc(16 + 64 /* blob */, GFP_KERNEL);
-					if (v2_response) {
-						CalcNTLMv2_response(pSesInfo,
-								   v2_response);
-				/*		if (first_time)
-						  cifs_calculate_ntlmv2_mac_key(
-						   pSesInfo->server->mac_signing_key,
-						   response, ntlm_session_key,*/
-						kfree(v2_response);
+	cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
+		 server->secMode, server->capabilities, server->timeAdj));
+
+	if (experimEnabled < 2)
+		rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
+	else if (extended_security
+			&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
+			&& (server->secType == NTLMSSP)) {
+		rc = -EOPNOTSUPP;
+	} else if (extended_security
+			&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
+			&& (server->secType == RawNTLMSSP)) {
+		cFYI(1, ("NTLMSSP sesssetup"));
+		rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag,
+						   nls_info);
+		if (!rc) {
+			if (ntlmv2_flag) {
+				char *v2_response;
+				cFYI(1, ("more secure NTLM ver2 hash"));
+				if (CalcNTLMv2_partial_mac_key(pSesInfo,
+								nls_info)) {
+					rc = -ENOMEM;
+					goto ss_err_exit;
+				} else
+					v2_response = kmalloc(16 + 64 /* blob*/,
+								GFP_KERNEL);
+				if (v2_response) {
+					CalcNTLMv2_response(pSesInfo,
+								v2_response);
+				/*	if (first_time)
+						cifs_calculate_ntlmv2_mac_key */
+					kfree(v2_response);
 					/* BB Put dummy sig in SessSetup PDU? */
-					} else {
-						rc = -ENOMEM;
-						goto ss_err_exit;
-					}
-
 				} else {
-					SMBNTencrypt(pSesInfo->password,
-						pSesInfo->server->cryptKey,
-						ntlm_session_key);
-
-					if (first_time)
-						cifs_calculate_mac_key(
-							&pSesInfo->server->mac_signing_key,
-							ntlm_session_key,
-							pSesInfo->password);
+					rc = -ENOMEM;
+					goto ss_err_exit;
 				}
+
+			} else {
+				SMBNTencrypt(pSesInfo->password,
+					     server->cryptKey,
+					     ntlm_session_key);
+
+				if (first_time)
+					cifs_calculate_mac_key(
+					     &server->mac_signing_key,
+					     ntlm_session_key,
+					     pSesInfo->password);
+			}
 			/* for better security the weaker lanman hash not sent
 			   in AuthSessSetup so we no longer calculate it */
 
-				rc = CIFSNTLMSSPAuthSessSetup(xid,
-					pSesInfo,
-					ntlm_session_key,
-					ntlmv2_flag,
-					nls_info);
-			}
-		} else { /* old style NTLM 0.12 session setup */
-			SMBNTencrypt(pSesInfo->password,
-				pSesInfo->server->cryptKey,
-				ntlm_session_key);
+			rc = CIFSNTLMSSPAuthSessSetup(xid, pSesInfo,
+						      ntlm_session_key,
+						      ntlmv2_flag,
+						      nls_info);
+		}
+	} else { /* old style NTLM 0.12 session setup */
+		SMBNTencrypt(pSesInfo->password, server->cryptKey,
+			     ntlm_session_key);
 
-			if (first_time)
-				cifs_calculate_mac_key(
-					&pSesInfo->server->mac_signing_key,
-					ntlm_session_key, pSesInfo->password);
+		if (first_time)
+			cifs_calculate_mac_key(&server->mac_signing_key,
+						ntlm_session_key,
+						pSesInfo->password);
 
-			rc = CIFSSessSetup(xid, pSesInfo,
-				ntlm_session_key, nls_info);
-		}
-		if (rc) {
-			cERROR(1, ("Send error in SessSetup = %d", rc));
-		} else {
-			cFYI(1, ("CIFS Session Established successfully"));
+		rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info);
+	}
+	if (rc) {
+		cERROR(1, ("Send error in SessSetup = %d", rc));
+	} else {
+		cFYI(1, ("CIFS Session Established successfully"));
 			pSesInfo->status = CifsGood;
-		}
 	}
+
 ss_err_exit:
 	return rc;
 }
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index fb69c1fa85c..e962e75e6f7 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -226,23 +226,28 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 		/* If Open reported that we actually created a file
 		then we now have to set the mode if possible */
 		if ((pTcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
+			struct cifs_unix_set_info_args args = {
+				.mode	= mode,
+				.ctime	= NO_CHANGE_64,
+				.atime	= NO_CHANGE_64,
+				.mtime	= NO_CHANGE_64,
+				.device	= 0,
+			};
+
 			if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
-				CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode,
-					(__u64)current->fsuid,
-					(__u64)current->fsgid,
-					0 /* dev */,
-					cifs_sb->local_nls,
-					cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
+				args.uid = (__u64) current->fsuid;
+				if (inode->i_mode & S_ISGID)
+					args.gid = (__u64) inode->i_gid;
+				else
+					args.gid = (__u64) current->fsgid;
 			} else {
-				CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode,
-					(__u64)-1,
-					(__u64)-1,
-					0 /* dev */,
-					cifs_sb->local_nls,
-					cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
+				args.uid = NO_CHANGE_64;
+				args.gid = NO_CHANGE_64;
 			}
+			CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args,
+				cifs_sb->local_nls,
+				cifs_sb->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
 		} else {
 			/* BB implement mode setting via Windows security
 			   descriptors e.g. */
@@ -267,7 +272,12 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 				    (cifs_sb->mnt_cifs_flags &
 				     CIFS_MOUNT_SET_UID)) {
 					newinode->i_uid = current->fsuid;
-					newinode->i_gid = current->fsgid;
+					if (inode->i_mode & S_ISGID)
+						newinode->i_gid =
+							inode->i_gid;
+					else
+						newinode->i_gid =
+							current->fsgid;
 				}
 			}
 		}
@@ -357,21 +367,24 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode,
 	if (full_path == NULL)
 		rc = -ENOMEM;
 	else if (pTcon->unix_ext) {
-		mode &= ~current->fs->umask;
+		struct cifs_unix_set_info_args args = {
+			.mode	= mode & ~current->fs->umask,
+			.ctime	= NO_CHANGE_64,
+			.atime	= NO_CHANGE_64,
+			.mtime	= NO_CHANGE_64,
+			.device	= device_number,
+		};
 		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
-			rc = CIFSSMBUnixSetPerms(xid, pTcon, full_path,
-				mode, (__u64)current->fsuid,
-				(__u64)current->fsgid,
-				device_number, cifs_sb->local_nls,
-				cifs_sb->mnt_cifs_flags &
-					CIFS_MOUNT_MAP_SPECIAL_CHR);
+			args.uid = (__u64) current->fsuid;
+			args.gid = (__u64) current->fsgid;
 		} else {
-			rc = CIFSSMBUnixSetPerms(xid, pTcon,
-				full_path, mode, (__u64)-1, (__u64)-1,
-				device_number, cifs_sb->local_nls,
-				cifs_sb->mnt_cifs_flags &
-					CIFS_MOUNT_MAP_SPECIAL_CHR);
+			args.uid = NO_CHANGE_64;
+			args.gid = NO_CHANGE_64;
 		}
+		rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path,
+			&args, cifs_sb->local_nls,
+			cifs_sb->mnt_cifs_flags &
+				CIFS_MOUNT_MAP_SPECIAL_CHR);
 
 		if (!rc) {
 			rc = cifs_get_inode_info_unix(&newinode, full_path,
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index f730ef35499..a2e0673e1b0 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -47,11 +47,18 @@ static int dns_resolver_instantiate(struct key *key, const void *data,
 	return rc;
 }
 
+static void
+dns_resolver_destroy(struct key *key)
+{
+	kfree(key->payload.data);
+}
+
 struct key_type key_type_dns_resolver = {
 	.name        = "dns_resolver",
 	.def_datalen = sizeof(struct in_addr),
 	.describe    = user_describe,
 	.instantiate = dns_resolver_instantiate,
+	.destroy     = dns_resolver_destroy,
 	.match       = user_match,
 };
 
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 0aac824371a..cbefe1f1f9f 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -310,18 +310,19 @@ int cifs_open(struct inode *inode, struct file *file)
 		/* time to set mode which we can not set earlier due to
 		   problems creating new read-only files */
 		if (pTcon->unix_ext) {
-			CIFSSMBUnixSetPerms(xid, pTcon, full_path,
-					    inode->i_mode,
-					    (__u64)-1, (__u64)-1, 0 /* dev */,
+			struct cifs_unix_set_info_args args = {
+				.mode	= inode->i_mode,
+				.uid	= NO_CHANGE_64,
+				.gid	= NO_CHANGE_64,
+				.ctime	= NO_CHANGE_64,
+				.atime	= NO_CHANGE_64,
+				.mtime	= NO_CHANGE_64,
+				.device	= 0,
+			};
+			CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args,
 					    cifs_sb->local_nls,
 					    cifs_sb->mnt_cifs_flags &
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
-		} else {
-			/* BB implement via Windows security descriptors eg
-			   CIFSSMBWinSetPerms(xid, pTcon, full_path, mode,
-					      -1, -1, local_nls);
-			   in the meantime could set r/o dos attribute when
-			   perms are eg: mode & 0222 == 0 */
 		}
 	}
 
@@ -832,6 +833,10 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 		return -EBADF;
 	open_file = (struct cifsFileInfo *) file->private_data;
 
+	rc = generic_write_checks(file, poffset, &write_size, 0);
+	if (rc)
+		return rc;
+
 	xid = GetXid();
 
 	if (*poffset > file->f_path.dentry->d_inode->i_size)
@@ -1280,7 +1285,7 @@ retry:
 
 			if (first < 0)
 				lock_page(page);
-			else if (TestSetPageLocked(page))
+			else if (!trylock_page(page))
 				break;
 
 			if (unlikely(page->mapping != mapping)) {
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 46e54d39461..9c548f11010 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -546,7 +546,8 @@ int cifs_get_inode_info(struct inode **pinode,
 		if ((inode->i_mode & S_IWUGO) == 0 &&
 		    (attr & ATTR_READONLY) == 0)
 			inode->i_mode |= (S_IWUGO & default_mode);
-			inode->i_mode &= ~S_IFMT;
+
+		inode->i_mode &= ~S_IFMT;
 	}
 	/* clear write bits if ATTR_READONLY is set */
 	if (attr & ATTR_READONLY)
@@ -649,6 +650,7 @@ struct inode *cifs_iget(struct super_block *sb, unsigned long ino)
 		inode->i_fop = &simple_dir_operations;
 		inode->i_uid = cifs_sb->mnt_uid;
 		inode->i_gid = cifs_sb->mnt_gid;
+	} else if (rc) {
 		_FreeXid(xid);
 		iget_failed(inode);
 		return ERR_PTR(rc);
@@ -737,7 +739,7 @@ psx_del_no_retry:
 			/* ATTRS set to normal clears r/o bit */
 			pinfo_buf->Attributes = cpu_to_le32(ATTR_NORMAL);
 			if (!(pTcon->ses->flags & CIFS_SES_NT4))
-				rc = CIFSSMBSetTimes(xid, pTcon, full_path,
+				rc = CIFSSMBSetPathInfo(xid, pTcon, full_path,
 						     pinfo_buf,
 						     cifs_sb->local_nls,
 						     cifs_sb->mnt_cifs_flags &
@@ -767,9 +769,10 @@ psx_del_no_retry:
 						 cifs_sb->mnt_cifs_flags &
 						    CIFS_MOUNT_MAP_SPECIAL_CHR);
 				if (rc == 0) {
-					rc = CIFSSMBSetFileTimes(xid, pTcon,
-								 pinfo_buf,
-								 netfid);
+					rc = CIFSSMBSetFileInfo(xid, pTcon,
+								pinfo_buf,
+								netfid,
+								current->tgid);
 					CIFSSMBClose(xid, pTcon, netfid);
 				}
 			}
@@ -984,32 +987,41 @@ mkdir_get_info:
 		  * failed to get it from the server or was set bogus */
 		if ((direntry->d_inode) && (direntry->d_inode->i_nlink < 2))
 				direntry->d_inode->i_nlink = 2;
+
 		mode &= ~current->fs->umask;
+		/* must turn on setgid bit if parent dir has it */
+		if (inode->i_mode & S_ISGID)
+			mode |= S_ISGID;
+
 		if (pTcon->unix_ext) {
+			struct cifs_unix_set_info_args args = {
+				.mode	= mode,
+				.ctime	= NO_CHANGE_64,
+				.atime	= NO_CHANGE_64,
+				.mtime	= NO_CHANGE_64,
+				.device	= 0,
+			};
 			if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
-				CIFSSMBUnixSetPerms(xid, pTcon, full_path,
-						    mode,
-						    (__u64)current->fsuid,
-						    (__u64)current->fsgid,
-						    0 /* dev_t */,
-						    cifs_sb->local_nls,
-						    cifs_sb->mnt_cifs_flags &
-						    CIFS_MOUNT_MAP_SPECIAL_CHR);
+				args.uid = (__u64)current->fsuid;
+				if (inode->i_mode & S_ISGID)
+					args.gid = (__u64)inode->i_gid;
+				else
+					args.gid = (__u64)current->fsgid;
 			} else {
-				CIFSSMBUnixSetPerms(xid, pTcon, full_path,
-						    mode, (__u64)-1,
-						    (__u64)-1, 0 /* dev_t */,
-						    cifs_sb->local_nls,
-						    cifs_sb->mnt_cifs_flags &
-						    CIFS_MOUNT_MAP_SPECIAL_CHR);
+				args.uid = NO_CHANGE_64;
+				args.gid = NO_CHANGE_64;
 			}
+			CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args,
+					    cifs_sb->local_nls,
+					    cifs_sb->mnt_cifs_flags &
+					    CIFS_MOUNT_MAP_SPECIAL_CHR);
 		} else {
 			if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) &&
 			    (mode & S_IWUGO) == 0) {
 				FILE_BASIC_INFO pInfo;
 				memset(&pInfo, 0, sizeof(pInfo));
 				pInfo.Attributes = cpu_to_le32(ATTR_READONLY);
-				CIFSSMBSetTimes(xid, pTcon, full_path,
+				CIFSSMBSetPathInfo(xid, pTcon, full_path,
 						&pInfo, cifs_sb->local_nls,
 						cifs_sb->mnt_cifs_flags &
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
@@ -1024,8 +1036,12 @@ mkdir_get_info:
 				     CIFS_MOUNT_SET_UID) {
 					direntry->d_inode->i_uid =
 						current->fsuid;
-					direntry->d_inode->i_gid =
-						current->fsgid;
+					if (inode->i_mode & S_ISGID)
+						direntry->d_inode->i_gid =
+							inode->i_gid;
+					else
+						direntry->d_inode->i_gid =
+							current->fsgid;
 				}
 			}
 		}
@@ -1310,10 +1326,11 @@ int cifs_revalidate(struct dentry *direntry)
 /*		if (S_ISDIR(direntry->d_inode->i_mode))
 			shrink_dcache_parent(direntry); */
 		if (S_ISREG(direntry->d_inode->i_mode)) {
-			if (direntry->d_inode->i_mapping)
+			if (direntry->d_inode->i_mapping) {
 				wbrc = filemap_fdatawait(direntry->d_inode->i_mapping);
 				if (wbrc)
 					CIFS_I(direntry->d_inode)->write_behind_rc = wbrc;
+			}
 			/* may eventually have to do this for open files too */
 			if (list_empty(&(cifsInode->openFileList))) {
 				/* changed on server - flush read ahead pages */
@@ -1489,30 +1506,228 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs,
 	return rc;
 }
 
-int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
+static int
+cifs_set_file_info(struct inode *inode, struct iattr *attrs, int xid,
+		    char *full_path, __u32 dosattr)
 {
+	int rc;
+	int oplock = 0;
+	__u16 netfid;
+	__u32 netpid;
+	bool set_time = false;
+	struct cifsFileInfo *open_file;
+	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *pTcon = cifs_sb->tcon;
+	FILE_BASIC_INFO	info_buf;
+
+	if (attrs->ia_valid & ATTR_ATIME) {
+		set_time = true;
+		info_buf.LastAccessTime =
+			cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_atime));
+	} else
+		info_buf.LastAccessTime = 0;
+
+	if (attrs->ia_valid & ATTR_MTIME) {
+		set_time = true;
+		info_buf.LastWriteTime =
+		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_mtime));
+	} else
+		info_buf.LastWriteTime = 0;
+
+	/*
+	 * Samba throws this field away, but windows may actually use it.
+	 * Do not set ctime unless other time stamps are changed explicitly
+	 * (i.e. by utimes()) since we would then have a mix of client and
+	 * server times.
+	 */
+	if (set_time && (attrs->ia_valid & ATTR_CTIME)) {
+		cFYI(1, ("CIFS - CTIME changed"));
+		info_buf.ChangeTime =
+		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_ctime));
+	} else
+		info_buf.ChangeTime = 0;
+
+	info_buf.CreationTime = 0;	/* don't change */
+	info_buf.Attributes = cpu_to_le32(dosattr);
+
+	/*
+	 * If the file is already open for write, just use that fileid
+	 */
+	open_file = find_writable_file(cifsInode);
+	if (open_file) {
+		netfid = open_file->netfid;
+		netpid = open_file->pid;
+		goto set_via_filehandle;
+	}
+
+	/*
+	 * NT4 apparently returns success on this call, but it doesn't
+	 * really work.
+	 */
+	if (!(pTcon->ses->flags & CIFS_SES_NT4)) {
+		rc = CIFSSMBSetPathInfo(xid, pTcon, full_path,
+				     &info_buf, cifs_sb->local_nls,
+				     cifs_sb->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
+		if (rc != -EOPNOTSUPP && rc != -EINVAL)
+			goto out;
+	}
+
+	cFYI(1, ("calling SetFileInfo since SetPathInfo for "
+		 "times not supported by this server"));
+	rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN,
+			 SYNCHRONIZE | FILE_WRITE_ATTRIBUTES,
+			 CREATE_NOT_DIR, &netfid, &oplock,
+			 NULL, cifs_sb->local_nls,
+			 cifs_sb->mnt_cifs_flags &
+				CIFS_MOUNT_MAP_SPECIAL_CHR);
+
+	if (rc != 0) {
+		if (rc == -EIO)
+			rc = -EINVAL;
+		goto out;
+	}
+
+	netpid = current->tgid;
+
+set_via_filehandle:
+	rc = CIFSSMBSetFileInfo(xid, pTcon, &info_buf, netfid, netpid);
+	if (open_file == NULL)
+		CIFSSMBClose(xid, pTcon, netfid);
+	else
+		atomic_dec(&open_file->wrtPending);
+out:
+	return rc;
+}
+
+static int
+cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs)
+{
+	int rc;
 	int xid;
-	struct cifs_sb_info *cifs_sb;
-	struct cifsTconInfo *pTcon;
 	char *full_path = NULL;
-	int rc = -EACCES;
-	FILE_BASIC_INFO time_buf;
-	bool set_time = false;
-	bool set_dosattr = false;
-	__u64 mode = 0xFFFFFFFFFFFFFFFFULL;
-	__u64 uid = 0xFFFFFFFFFFFFFFFFULL;
-	__u64 gid = 0xFFFFFFFFFFFFFFFFULL;
-	struct cifsInodeInfo *cifsInode;
 	struct inode *inode = direntry->d_inode;
+	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *pTcon = cifs_sb->tcon;
+	struct cifs_unix_set_info_args *args = NULL;
+
+	cFYI(1, ("setattr_unix on file %s attrs->ia_valid=0x%x",
+		 direntry->d_name.name, attrs->ia_valid));
+
+	xid = GetXid();
+
+	if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
+		/* check if we have permission to change attrs */
+		rc = inode_change_ok(inode, attrs);
+		if (rc < 0)
+			goto out;
+		else
+			rc = 0;
+	}
+
+	full_path = build_path_from_dentry(direntry);
+	if (full_path == NULL) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
+		/*
+		   Flush data before changing file size or changing the last
+		   write time of the file on the server. If the
+		   flush returns error, store it to report later and continue.
+		   BB: This should be smarter. Why bother flushing pages that
+		   will be truncated anyway? Also, should we error out here if
+		   the flush returns error?
+		 */
+		rc = filemap_write_and_wait(inode->i_mapping);
+		if (rc != 0) {
+			cifsInode->write_behind_rc = rc;
+			rc = 0;
+		}
+	}
+
+	if (attrs->ia_valid & ATTR_SIZE) {
+		rc = cifs_set_file_size(inode, attrs, xid, full_path);
+		if (rc != 0)
+			goto out;
+	}
+
+	/* skip mode change if it's just for clearing setuid/setgid */
+	if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID))
+		attrs->ia_valid &= ~ATTR_MODE;
+
+	args = kmalloc(sizeof(*args), GFP_KERNEL);
+	if (args == NULL) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* set up the struct */
+	if (attrs->ia_valid & ATTR_MODE)
+		args->mode = attrs->ia_mode;
+	else
+		args->mode = NO_CHANGE_64;
+
+	if (attrs->ia_valid & ATTR_UID)
+		args->uid = attrs->ia_uid;
+	else
+		args->uid = NO_CHANGE_64;
+
+	if (attrs->ia_valid & ATTR_GID)
+		args->gid = attrs->ia_gid;
+	else
+		args->gid = NO_CHANGE_64;
+
+	if (attrs->ia_valid & ATTR_ATIME)
+		args->atime = cifs_UnixTimeToNT(attrs->ia_atime);
+	else
+		args->atime = NO_CHANGE_64;
+
+	if (attrs->ia_valid & ATTR_MTIME)
+		args->mtime = cifs_UnixTimeToNT(attrs->ia_mtime);
+	else
+		args->mtime = NO_CHANGE_64;
+
+	if (attrs->ia_valid & ATTR_CTIME)
+		args->ctime = cifs_UnixTimeToNT(attrs->ia_ctime);
+	else
+		args->ctime = NO_CHANGE_64;
+
+	args->device = 0;
+	rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, args,
+				cifs_sb->local_nls,
+				cifs_sb->mnt_cifs_flags &
+				CIFS_MOUNT_MAP_SPECIAL_CHR);
+
+	if (!rc)
+		rc = inode_setattr(inode, attrs);
+out:
+	kfree(args);
+	kfree(full_path);
+	FreeXid(xid);
+	return rc;
+}
+
+static int
+cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
+{
+	int xid;
+	struct inode *inode = direntry->d_inode;
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+	char *full_path = NULL;
+	int rc = -EACCES;
+	__u32 dosattr = 0;
+	__u64 mode = NO_CHANGE_64;
 
 	xid = GetXid();
 
 	cFYI(1, ("setattr on file %s attrs->iavalid 0x%x",
 		 direntry->d_name.name, attrs->ia_valid));
 
-	cifs_sb = CIFS_SB(inode->i_sb);
-	pTcon = cifs_sb->tcon;
-
 	if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
 		/* check if we have permission to change attrs */
 		rc = inode_change_ok(inode, attrs);
@@ -1528,7 +1743,6 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 		FreeXid(xid);
 		return -ENOMEM;
 	}
-	cifsInode = CIFS_I(inode);
 
 	if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
 		/*
@@ -1559,21 +1773,8 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 	 * CIFSACL support + proper Windows to Unix idmapping, we may be
 	 * able to support this in the future.
 	 */
-	if (!pTcon->unix_ext &&
-	    !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) {
+	if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID))
 		attrs->ia_valid &= ~(ATTR_UID | ATTR_GID);
-	} else {
-		if (attrs->ia_valid & ATTR_UID) {
-			cFYI(1, ("UID changed to %d", attrs->ia_uid));
-			uid = attrs->ia_uid;
-		}
-		if (attrs->ia_valid & ATTR_GID) {
-			cFYI(1, ("GID changed to %d", attrs->ia_gid));
-			gid = attrs->ia_gid;
-		}
-	}
-
-	time_buf.Attributes = 0;
 
 	/* skip mode change if it's just for clearing setuid/setgid */
 	if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID))
@@ -1584,13 +1785,7 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 		mode = attrs->ia_mode;
 	}
 
-	if ((pTcon->unix_ext)
-	    && (attrs->ia_valid & (ATTR_MODE | ATTR_GID | ATTR_UID)))
-		rc = CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode, uid, gid,
-					 0 /* dev_t */, cifs_sb->local_nls,
-					 cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-	else if (attrs->ia_valid & ATTR_MODE) {
+	if (attrs->ia_valid & ATTR_MODE) {
 		rc = 0;
 #ifdef CONFIG_CIFS_EXPERIMENTAL
 		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
@@ -1599,24 +1794,19 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 #endif
 		if (((mode & S_IWUGO) == 0) &&
 		    (cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
-			set_dosattr = true;
-			time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs |
-							  ATTR_READONLY);
+
+			dosattr = cifsInode->cifsAttrs | ATTR_READONLY;
+
 			/* fix up mode if we're not using dynperm */
 			if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
 				attrs->ia_mode = inode->i_mode & ~S_IWUGO;
 		} else if ((mode & S_IWUGO) &&
 			   (cifsInode->cifsAttrs & ATTR_READONLY)) {
-			/* If file is readonly on server, we would
-			not be able to write to it - so if any write
-			bit is enabled for user or group or other we
-			need to at least try to remove r/o dos attr */
-			set_dosattr = true;
-			time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs &
-					    (~ATTR_READONLY));
-			/* Windows ignores set to zero */
-			if (time_buf.Attributes == 0)
-				time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL);
+
+			dosattr = cifsInode->cifsAttrs & ~ATTR_READONLY;
+			/* Attributes of 0 are ignored */
+			if (dosattr == 0)
+				dosattr |= ATTR_NORMAL;
 
 			/* reset local inode permissions to normal */
 			if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) {
@@ -1634,82 +1824,18 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 		}
 	}
 
-	if (attrs->ia_valid & ATTR_ATIME) {
-		set_time = true;
-		time_buf.LastAccessTime =
-		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_atime));
-	} else
-		time_buf.LastAccessTime = 0;
-
-	if (attrs->ia_valid & ATTR_MTIME) {
-		set_time = true;
-		time_buf.LastWriteTime =
-		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_mtime));
-	} else
-		time_buf.LastWriteTime = 0;
-	/* Do not set ctime explicitly unless other time
-	   stamps are changed explicitly (i.e. by utime()
-	   since we would then have a mix of client and
-	   server times */
+	if (attrs->ia_valid & (ATTR_MTIME|ATTR_ATIME|ATTR_CTIME) ||
+	    ((attrs->ia_valid & ATTR_MODE) && dosattr)) {
+		rc = cifs_set_file_info(inode, attrs, xid, full_path, dosattr);
+		/* BB: check for rc = -EOPNOTSUPP and switch to legacy mode */
 
-	if (set_time && (attrs->ia_valid & ATTR_CTIME)) {
-		set_time = true;
-		/* Although Samba throws this field away
-		it may be useful to Windows - but we do
-		not want to set ctime unless some other
-		timestamp is changing */
-		cFYI(1, ("CIFS - CTIME changed"));
-		time_buf.ChangeTime =
-		    cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_ctime));
-	} else
-		time_buf.ChangeTime = 0;
-
-	if (set_time || set_dosattr) {
-		time_buf.CreationTime = 0;	/* do not change */
-		/* In the future we should experiment - try setting timestamps
-		   via Handle (SetFileInfo) instead of by path */
-		if (!(pTcon->ses->flags & CIFS_SES_NT4))
-			rc = CIFSSMBSetTimes(xid, pTcon, full_path, &time_buf,
-					     cifs_sb->local_nls,
-					     cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-		else
-			rc = -EOPNOTSUPP;
-
-		if (rc == -EOPNOTSUPP) {
-			int oplock = 0;
-			__u16 netfid;
-
-			cFYI(1, ("calling SetFileInfo since SetPathInfo for "
-				 "times not supported by this server"));
-			/* BB we could scan to see if we already have it open
-			   and pass in pid of opener to function */
-			rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN,
-					 SYNCHRONIZE | FILE_WRITE_ATTRIBUTES,
-					 CREATE_NOT_DIR, &netfid, &oplock,
-					 NULL, cifs_sb->local_nls,
-					 cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-			if (rc == 0) {
-				rc = CIFSSMBSetFileTimes(xid, pTcon, &time_buf,
-							 netfid);
-				CIFSSMBClose(xid, pTcon, netfid);
-			} else {
-			/* BB For even older servers we could convert time_buf
-			   into old DOS style which uses two second
-			   granularity */
-
-			/* rc = CIFSSMBSetTimesLegacy(xid, pTcon, full_path,
-					&time_buf, cifs_sb->local_nls); */
-			}
-		}
 		/* Even if error on time set, no sense failing the call if
 		the server would set the time to a reasonable value anyway,
 		and this check ensures that we are not being called from
 		sys_utimes in which case we ought to fail the call back to
 		the user when the server rejects the call */
 		if ((rc) && (attrs->ia_valid &
-			 (ATTR_MODE | ATTR_GID | ATTR_UID | ATTR_SIZE)))
+				(ATTR_MODE | ATTR_GID | ATTR_UID | ATTR_SIZE)))
 			rc = 0;
 	}
 
@@ -1723,6 +1849,21 @@ cifs_setattr_exit:
 	return rc;
 }
 
+int
+cifs_setattr(struct dentry *direntry, struct iattr *attrs)
+{
+	struct inode *inode = direntry->d_inode;
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *pTcon = cifs_sb->tcon;
+
+	if (pTcon->unix_ext)
+		return cifs_setattr_unix(direntry, attrs);
+
+	return cifs_setattr_nounix(direntry, attrs);
+
+	/* BB: add cifs_setattr_legacy for really old servers */
+}
+
 #if 0
 void cifs_delete_inode(struct inode *inode)
 {
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index ed150efbe27..252fdc0567f 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -409,6 +409,8 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
 		char lnm_session_key[CIFS_SESS_KEY_SIZE];
 
+		pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
+
 		/* no capabilities flags in old lanman negotiation */
 
 		pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE);
@@ -505,7 +507,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 			unicode_ssetup_strings(&bcc_ptr, ses, nls_cp);
 		} else
 			ascii_ssetup_strings(&bcc_ptr, ses, nls_cp);
-	} else if (type == Kerberos) {
+	} else if (type == Kerberos || type == MSKerberos) {
 #ifdef CONFIG_CIFS_UPCALL
 		struct cifs_spnego_msg *msg;
 		spnego_key = cifs_get_spnego_key(ses);
@@ -516,6 +518,15 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 		}
 
 		msg = spnego_key->payload.data;
+		/* check version field to make sure that cifs.upcall is
+		   sending us a response in an expected form */
+		if (msg->version != CIFS_SPNEGO_UPCALL_VERSION) {
+			cERROR(1, ("incorrect version of cifs.upcall (expected"
+				   " %d but got %d)",
+				   CIFS_SPNEGO_UPCALL_VERSION, msg->version));
+			rc = -EKEYREJECTED;
+			goto ssetup_exit;
+		}
 		/* bail out if key is too long */
 		if (msg->sesskey_len >
 		    sizeof(ses->server->mac_signing_key.data.krb5)) {
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 000ac509c98..e286db9f5ee 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -265,6 +265,7 @@ smb_send2(struct socket *ssocket, struct kvec *iov, int n_vec,
 	cFYI(1, ("Sending smb:  total_len %d", total_len));
 	dump_smb(smb_buffer, len);
 
+	i = 0;
 	while (total_len) {
 		rc = kernel_sendmsg(ssocket, &smb_msg, &iov[first_vec],
 				    n_vec - first_vec, total_len);
diff --git a/fs/compat.c b/fs/compat.c
index c9d1472e65c..075d0509970 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -792,8 +792,10 @@ static int compat_fillonedir(void *__buf, const char *name, int namlen,
 	if (buf->result)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->result = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	buf->result++;
 	dirent = buf->dirent;
 	if (!access_ok(VERIFY_WRITE, dirent,
@@ -862,8 +864,10 @@ static int compat_filldir(void *__buf, const char *name, int namlen,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	dirent = buf->previous;
 	if (dirent) {
 		if (__put_user(offset, &dirent->d_off))
diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h
index da015c12e3e..762d287123c 100644
--- a/fs/configfs/configfs_internal.h
+++ b/fs/configfs/configfs_internal.h
@@ -49,8 +49,10 @@ struct configfs_dirent {
 #define CONFIGFS_USET_DEFAULT	0x0080
 #define CONFIGFS_USET_DROPPING	0x0100
 #define CONFIGFS_USET_IN_MKDIR	0x0200
+#define CONFIGFS_USET_CREATING	0x0400
 #define CONFIGFS_NOT_PINNED	(CONFIGFS_ITEM_ATTR)
 
+extern struct mutex configfs_symlink_mutex;
 extern spinlock_t configfs_dirent_lock;
 
 extern struct vfsmount * configfs_mount;
@@ -66,6 +68,7 @@ extern void configfs_inode_exit(void);
 extern int configfs_create_file(struct config_item *, const struct configfs_attribute *);
 extern int configfs_make_dirent(struct configfs_dirent *,
 				struct dentry *, void *, umode_t, int);
+extern int configfs_dirent_is_ready(struct configfs_dirent *);
 
 extern int configfs_add_file(struct dentry *, const struct configfs_attribute *, int);
 extern void configfs_hash_and_remove(struct dentry * dir, const char * name);
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 179589be063..8e93341f3e8 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -185,7 +185,7 @@ static int create_dir(struct config_item * k, struct dentry * p,
 	error = configfs_dirent_exists(p->d_fsdata, d->d_name.name);
 	if (!error)
 		error = configfs_make_dirent(p->d_fsdata, d, k, mode,
-					     CONFIGFS_DIR);
+					     CONFIGFS_DIR | CONFIGFS_USET_CREATING);
 	if (!error) {
 		error = configfs_create(d, mode, init_dir);
 		if (!error) {
@@ -209,6 +209,9 @@ static int create_dir(struct config_item * k, struct dentry * p,
  *	configfs_create_dir - create a directory for an config_item.
  *	@item:		config_itemwe're creating directory for.
  *	@dentry:	config_item's dentry.
+ *
+ *	Note: user-created entries won't be allowed under this new directory
+ *	until it is validated by configfs_dir_set_ready()
  */
 
 static int configfs_create_dir(struct config_item * item, struct dentry *dentry)
@@ -231,6 +234,44 @@ static int configfs_create_dir(struct config_item * item, struct dentry *dentry)
 	return error;
 }
 
+/*
+ * Allow userspace to create new entries under a new directory created with
+ * configfs_create_dir(), and under all of its chidlren directories recursively.
+ * @sd		configfs_dirent of the new directory to validate
+ *
+ * Caller must hold configfs_dirent_lock.
+ */
+static void configfs_dir_set_ready(struct configfs_dirent *sd)
+{
+	struct configfs_dirent *child_sd;
+
+	sd->s_type &= ~CONFIGFS_USET_CREATING;
+	list_for_each_entry(child_sd, &sd->s_children, s_sibling)
+		if (child_sd->s_type & CONFIGFS_USET_CREATING)
+			configfs_dir_set_ready(child_sd);
+}
+
+/*
+ * Check that a directory does not belong to a directory hierarchy being
+ * attached and not validated yet.
+ * @sd		configfs_dirent of the directory to check
+ *
+ * @return	non-zero iff the directory was validated
+ *
+ * Note: takes configfs_dirent_lock, so the result may change from false to true
+ * in two consecutive calls, but never from true to false.
+ */
+int configfs_dirent_is_ready(struct configfs_dirent *sd)
+{
+	int ret;
+
+	spin_lock(&configfs_dirent_lock);
+	ret = !(sd->s_type & CONFIGFS_USET_CREATING);
+	spin_unlock(&configfs_dirent_lock);
+
+	return ret;
+}
+
 int configfs_create_link(struct configfs_symlink *sl,
 			 struct dentry *parent,
 			 struct dentry *dentry)
@@ -283,6 +324,8 @@ static void remove_dir(struct dentry * d)
  * The only thing special about this is that we remove any files in
  * the directory before we remove the directory, and we've inlined
  * what used to be configfs_rmdir() below, instead of calling separately.
+ *
+ * Caller holds the mutex of the item's inode
  */
 
 static void configfs_remove_dir(struct config_item * item)
@@ -330,7 +373,19 @@ static struct dentry * configfs_lookup(struct inode *dir,
 	struct configfs_dirent * parent_sd = dentry->d_parent->d_fsdata;
 	struct configfs_dirent * sd;
 	int found = 0;
-	int err = 0;
+	int err;
+
+	/*
+	 * Fake invisibility if dir belongs to a group/default groups hierarchy
+	 * being attached
+	 *
+	 * This forbids userspace to read/write attributes of items which may
+	 * not complete their initialization, since the dentries of the
+	 * attributes won't be instantiated.
+	 */
+	err = -ENOENT;
+	if (!configfs_dirent_is_ready(parent_sd))
+		goto out;
 
 	list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
 		if (sd->s_type & CONFIGFS_NOT_PINNED) {
@@ -353,6 +408,7 @@ static struct dentry * configfs_lookup(struct inode *dir,
 		return simple_lookup(dir, dentry, nd);
 	}
 
+out:
 	return ERR_PTR(err);
 }
 
@@ -370,13 +426,17 @@ static int configfs_detach_prep(struct dentry *dentry, struct mutex **wait_mutex
 	struct configfs_dirent *sd;
 	int ret;
 
+	/* Mark that we're trying to drop the group */
+	parent_sd->s_type |= CONFIGFS_USET_DROPPING;
+
 	ret = -EBUSY;
 	if (!list_empty(&parent_sd->s_links))
 		goto out;
 
 	ret = 0;
 	list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
-		if (sd->s_type & CONFIGFS_NOT_PINNED)
+		if (!sd->s_element ||
+		    (sd->s_type & CONFIGFS_NOT_PINNED))
 			continue;
 		if (sd->s_type & CONFIGFS_USET_DEFAULT) {
 			/* Abort if racing with mkdir() */
@@ -385,8 +445,6 @@ static int configfs_detach_prep(struct dentry *dentry, struct mutex **wait_mutex
 					*wait_mutex = &sd->s_dentry->d_inode->i_mutex;
 				return -EAGAIN;
 			}
-			/* Mark that we're trying to drop the group */
-			sd->s_type |= CONFIGFS_USET_DROPPING;
 
 			/*
 			 * Yup, recursive.  If there's a problem, blame
@@ -414,12 +472,11 @@ static void configfs_detach_rollback(struct dentry *dentry)
 	struct configfs_dirent *parent_sd = dentry->d_fsdata;
 	struct configfs_dirent *sd;
 
-	list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
-		if (sd->s_type & CONFIGFS_USET_DEFAULT) {
+	parent_sd->s_type &= ~CONFIGFS_USET_DROPPING;
+
+	list_for_each_entry(sd, &parent_sd->s_children, s_sibling)
+		if (sd->s_type & CONFIGFS_USET_DEFAULT)
 			configfs_detach_rollback(sd->s_dentry);
-			sd->s_type &= ~CONFIGFS_USET_DROPPING;
-		}
-	}
 }
 
 static void detach_attrs(struct config_item * item)
@@ -558,36 +615,21 @@ static int create_default_group(struct config_group *parent_group,
 static int populate_groups(struct config_group *group)
 {
 	struct config_group *new_group;
-	struct dentry *dentry = group->cg_item.ci_dentry;
 	int ret = 0;
 	int i;
 
 	if (group->default_groups) {
-		/*
-		 * FYI, we're faking mkdir here
-		 * I'm not sure we need this semaphore, as we're called
-		 * from our parent's mkdir.  That holds our parent's
-		 * i_mutex, so afaik lookup cannot continue through our
-		 * parent to find us, let alone mess with our tree.
-		 * That said, taking our i_mutex is closer to mkdir
-		 * emulation, and shouldn't hurt.
-		 */
-		mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
-
 		for (i = 0; group->default_groups[i]; i++) {
 			new_group = group->default_groups[i];
 
 			ret = create_default_group(group, new_group);
-			if (ret)
+			if (ret) {
+				detach_groups(group);
 				break;
+			}
 		}
-
-		mutex_unlock(&dentry->d_inode->i_mutex);
 	}
 
-	if (ret)
-		detach_groups(group);
-
 	return ret;
 }
 
@@ -702,7 +744,15 @@ static int configfs_attach_item(struct config_item *parent_item,
 	if (!ret) {
 		ret = populate_attrs(item);
 		if (ret) {
+			/*
+			 * We are going to remove an inode and its dentry but
+			 * the VFS may already have hit and used them. Thus,
+			 * we must lock them as rmdir() would.
+			 */
+			mutex_lock(&dentry->d_inode->i_mutex);
 			configfs_remove_dir(item);
+			dentry->d_inode->i_flags |= S_DEAD;
+			mutex_unlock(&dentry->d_inode->i_mutex);
 			d_delete(dentry);
 		}
 	}
@@ -710,6 +760,7 @@ static int configfs_attach_item(struct config_item *parent_item,
 	return ret;
 }
 
+/* Caller holds the mutex of the item's inode */
 static void configfs_detach_item(struct config_item *item)
 {
 	detach_attrs(item);
@@ -728,16 +779,30 @@ static int configfs_attach_group(struct config_item *parent_item,
 		sd = dentry->d_fsdata;
 		sd->s_type |= CONFIGFS_USET_DIR;
 
+		/*
+		 * FYI, we're faking mkdir in populate_groups()
+		 * We must lock the group's inode to avoid races with the VFS
+		 * which can already hit the inode and try to add/remove entries
+		 * under it.
+		 *
+		 * We must also lock the inode to remove it safely in case of
+		 * error, as rmdir() would.
+		 */
+		mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
 		ret = populate_groups(to_config_group(item));
 		if (ret) {
 			configfs_detach_item(item);
-			d_delete(dentry);
+			dentry->d_inode->i_flags |= S_DEAD;
 		}
+		mutex_unlock(&dentry->d_inode->i_mutex);
+		if (ret)
+			d_delete(dentry);
 	}
 
 	return ret;
 }
 
+/* Caller holds the mutex of the group's inode */
 static void configfs_detach_group(struct config_item *item)
 {
 	detach_groups(to_config_group(item));
@@ -1035,7 +1100,7 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	struct configfs_subsystem *subsys;
 	struct configfs_dirent *sd;
 	struct config_item_type *type;
-	struct module *owner = NULL;
+	struct module *subsys_owner = NULL, *new_item_owner = NULL;
 	char *name;
 
 	if (dentry->d_parent == configfs_sb->s_root) {
@@ -1044,6 +1109,16 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	}
 
 	sd = dentry->d_parent->d_fsdata;
+
+	/*
+	 * Fake invisibility if dir belongs to a group/default groups hierarchy
+	 * being attached
+	 */
+	if (!configfs_dirent_is_ready(sd)) {
+		ret = -ENOENT;
+		goto out;
+	}
+
 	if (!(sd->s_type & CONFIGFS_USET_DIR)) {
 		ret = -EPERM;
 		goto out;
@@ -1062,10 +1137,25 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 		goto out_put;
 	}
 
+	/*
+	 * The subsystem may belong to a different module than the item
+	 * being created.  We don't want to safely pin the new item but
+	 * fail to pin the subsystem it sits under.
+	 */
+	if (!subsys->su_group.cg_item.ci_type) {
+		ret = -EINVAL;
+		goto out_put;
+	}
+	subsys_owner = subsys->su_group.cg_item.ci_type->ct_owner;
+	if (!try_module_get(subsys_owner)) {
+		ret = -EINVAL;
+		goto out_put;
+	}
+
 	name = kmalloc(dentry->d_name.len + 1, GFP_KERNEL);
 	if (!name) {
 		ret = -ENOMEM;
-		goto out_put;
+		goto out_subsys_put;
 	}
 
 	snprintf(name, dentry->d_name.len + 1, "%s", dentry->d_name.name);
@@ -1094,10 +1184,10 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	kfree(name);
 	if (ret) {
 		/*
-		 * If item == NULL, then link_obj() was never called.
+		 * If ret != 0, then link_obj() was never called.
 		 * There are no extra references to clean up.
 		 */
-		goto out_put;
+		goto out_subsys_put;
 	}
 
 	/*
@@ -1111,8 +1201,8 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 		goto out_unlink;
 	}
 
-	owner = type->ct_owner;
-	if (!try_module_get(owner)) {
+	new_item_owner = type->ct_owner;
+	if (!try_module_get(new_item_owner)) {
 		ret = -EINVAL;
 		goto out_unlink;
 	}
@@ -1142,6 +1232,8 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 
 	spin_lock(&configfs_dirent_lock);
 	sd->s_type &= ~CONFIGFS_USET_IN_MKDIR;
+	if (!ret)
+		configfs_dir_set_ready(dentry->d_fsdata);
 	spin_unlock(&configfs_dirent_lock);
 
 out_unlink:
@@ -1159,9 +1251,13 @@ out_unlink:
 		mutex_unlock(&subsys->su_mutex);
 
 		if (module_got)
-			module_put(owner);
+			module_put(new_item_owner);
 	}
 
+out_subsys_put:
+	if (ret)
+		module_put(subsys_owner);
+
 out_put:
 	/*
 	 * link_obj()/link_group() took a reference from child->parent,
@@ -1180,7 +1276,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	struct config_item *item;
 	struct configfs_subsystem *subsys;
 	struct configfs_dirent *sd;
-	struct module *owner = NULL;
+	struct module *subsys_owner = NULL, *dead_item_owner = NULL;
 	int ret;
 
 	if (dentry->d_parent == configfs_sb->s_root)
@@ -1207,14 +1303,26 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 		return -EINVAL;
 	}
 
-	spin_lock(&configfs_dirent_lock);
+	/* configfs_mkdir() shouldn't have allowed this */
+	BUG_ON(!subsys->su_group.cg_item.ci_type);
+	subsys_owner = subsys->su_group.cg_item.ci_type->ct_owner;
+
+	/*
+	 * Ensure that no racing symlink() will make detach_prep() fail while
+	 * the new link is temporarily attached
+	 */
 	do {
 		struct mutex *wait_mutex;
 
+		mutex_lock(&configfs_symlink_mutex);
+		spin_lock(&configfs_dirent_lock);
 		ret = configfs_detach_prep(dentry, &wait_mutex);
-		if (ret) {
+		if (ret)
 			configfs_detach_rollback(dentry);
-			spin_unlock(&configfs_dirent_lock);
+		spin_unlock(&configfs_dirent_lock);
+		mutex_unlock(&configfs_symlink_mutex);
+
+		if (ret) {
 			if (ret != -EAGAIN) {
 				config_item_put(parent_item);
 				return ret;
@@ -1223,11 +1331,8 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 			/* Wait until the racing operation terminates */
 			mutex_lock(wait_mutex);
 			mutex_unlock(wait_mutex);
-
-			spin_lock(&configfs_dirent_lock);
 		}
 	} while (ret == -EAGAIN);
-	spin_unlock(&configfs_dirent_lock);
 
 	/* Get a working ref for the duration of this function */
 	item = configfs_get_config_item(dentry);
@@ -1236,7 +1341,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	config_item_put(parent_item);
 
 	if (item->ci_type)
-		owner = item->ci_type->ct_owner;
+		dead_item_owner = item->ci_type->ct_owner;
 
 	if (sd->s_type & CONFIGFS_USET_DIR) {
 		configfs_detach_group(item);
@@ -1258,7 +1363,8 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	/* Drop our reference from above */
 	config_item_put(item);
 
-	module_put(owner);
+	module_put(dead_item_owner);
+	module_put(subsys_owner);
 
 	return 0;
 }
@@ -1314,13 +1420,24 @@ static int configfs_dir_open(struct inode *inode, struct file *file)
 {
 	struct dentry * dentry = file->f_path.dentry;
 	struct configfs_dirent * parent_sd = dentry->d_fsdata;
+	int err;
 
 	mutex_lock(&dentry->d_inode->i_mutex);
-	file->private_data = configfs_new_dirent(parent_sd, NULL);
+	/*
+	 * Fake invisibility if dir belongs to a group/default groups hierarchy
+	 * being attached
+	 */
+	err = -ENOENT;
+	if (configfs_dirent_is_ready(parent_sd)) {
+		file->private_data = configfs_new_dirent(parent_sd, NULL);
+		if (IS_ERR(file->private_data))
+			err = PTR_ERR(file->private_data);
+		else
+			err = 0;
+	}
 	mutex_unlock(&dentry->d_inode->i_mutex);
 
-	return IS_ERR(file->private_data) ? PTR_ERR(file->private_data) : 0;
-
+	return err;
 }
 
 static int configfs_dir_close(struct inode *inode, struct file *file)
@@ -1491,6 +1608,10 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys)
 		if (err) {
 			d_delete(dentry);
 			dput(dentry);
+		} else {
+			spin_lock(&configfs_dirent_lock);
+			configfs_dir_set_ready(dentry->d_fsdata);
+			spin_unlock(&configfs_dirent_lock);
 		}
 	}
 
@@ -1517,11 +1638,13 @@ void configfs_unregister_subsystem(struct configfs_subsystem *subsys)
 	mutex_lock_nested(&configfs_sb->s_root->d_inode->i_mutex,
 			  I_MUTEX_PARENT);
 	mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
+	mutex_lock(&configfs_symlink_mutex);
 	spin_lock(&configfs_dirent_lock);
 	if (configfs_detach_prep(dentry, NULL)) {
 		printk(KERN_ERR "configfs: Tried to unregister non-empty subsystem!\n");
 	}
 	spin_unlock(&configfs_dirent_lock);
+	mutex_unlock(&configfs_symlink_mutex);
 	configfs_detach_group(&group->cg_item);
 	dentry->d_inode->i_flags |= S_DEAD;
 	mutex_unlock(&dentry->d_inode->i_mutex);
diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c
index 0004d18c40a..bf74973b049 100644
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -31,6 +31,9 @@
 #include <linux/configfs.h>
 #include "configfs_internal.h"
 
+/* Protects attachments of new symlinks */
+DEFINE_MUTEX(configfs_symlink_mutex);
+
 static int item_depth(struct config_item * item)
 {
 	struct config_item * p = item;
@@ -73,11 +76,20 @@ static int create_link(struct config_item *parent_item,
 	struct configfs_symlink *sl;
 	int ret;
 
+	ret = -ENOENT;
+	if (!configfs_dirent_is_ready(target_sd))
+		goto out;
 	ret = -ENOMEM;
 	sl = kmalloc(sizeof(struct configfs_symlink), GFP_KERNEL);
 	if (sl) {
 		sl->sl_target = config_item_get(item);
 		spin_lock(&configfs_dirent_lock);
+		if (target_sd->s_type & CONFIGFS_USET_DROPPING) {
+			spin_unlock(&configfs_dirent_lock);
+			config_item_put(item);
+			kfree(sl);
+			return -ENOENT;
+		}
 		list_add(&sl->sl_list, &target_sd->s_links);
 		spin_unlock(&configfs_dirent_lock);
 		ret = configfs_create_link(sl, parent_item->ci_dentry,
@@ -91,6 +103,7 @@ static int create_link(struct config_item *parent_item,
 		}
 	}
 
+out:
 	return ret;
 }
 
@@ -120,6 +133,7 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna
 {
 	int ret;
 	struct nameidata nd;
+	struct configfs_dirent *sd;
 	struct config_item *parent_item;
 	struct config_item *target_item;
 	struct config_item_type *type;
@@ -128,9 +142,19 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna
 	if (dentry->d_parent == configfs_sb->s_root)
 		goto out;
 
+	sd = dentry->d_parent->d_fsdata;
+	/*
+	 * Fake invisibility if dir belongs to a group/default groups hierarchy
+	 * being attached
+	 */
+	ret = -ENOENT;
+	if (!configfs_dirent_is_ready(sd))
+		goto out;
+
 	parent_item = configfs_get_config_item(dentry->d_parent);
 	type = parent_item->ci_type;
 
+	ret = -EPERM;
 	if (!type || !type->ct_item_ops ||
 	    !type->ct_item_ops->allow_link)
 		goto out_put;
@@ -141,7 +165,9 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna
 
 	ret = type->ct_item_ops->allow_link(parent_item, target_item);
 	if (!ret) {
+		mutex_lock(&configfs_symlink_mutex);
 		ret = create_link(parent_item, target_item, dentry);
+		mutex_unlock(&configfs_symlink_mutex);
 		if (ret && type->ct_item_ops->drop_link)
 			type->ct_item_ops->drop_link(parent_item,
 						     target_item);
diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index 0c3b618c15b..f40423eb1a1 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -43,58 +43,13 @@ static DEFINE_MUTEX(read_mutex);
 static int cramfs_iget5_test(struct inode *inode, void *opaque)
 {
 	struct cramfs_inode *cramfs_inode = opaque;
-
-	if (inode->i_ino != CRAMINO(cramfs_inode))
-		return 0; /* does not match */
-
-	if (inode->i_ino != 1)
-		return 1;
-
-	/* all empty directories, char, block, pipe, and sock, share inode #1 */
-
-	if ((inode->i_mode != cramfs_inode->mode) ||
-	    (inode->i_gid != cramfs_inode->gid) ||
-	    (inode->i_uid != cramfs_inode->uid))
-		return 0; /* does not match */
-
-	if ((S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) &&
-	    (inode->i_rdev != old_decode_dev(cramfs_inode->size)))
-		return 0; /* does not match */
-
-	return 1; /* matches */
+	return inode->i_ino == CRAMINO(cramfs_inode) && inode->i_ino != 1;
 }
 
 static int cramfs_iget5_set(struct inode *inode, void *opaque)
 {
-	static struct timespec zerotime;
 	struct cramfs_inode *cramfs_inode = opaque;
-	inode->i_mode = cramfs_inode->mode;
-	inode->i_uid = cramfs_inode->uid;
-	inode->i_size = cramfs_inode->size;
-	inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
-	inode->i_gid = cramfs_inode->gid;
-	/* Struct copy intentional */
-	inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
 	inode->i_ino = CRAMINO(cramfs_inode);
-	/* inode->i_nlink is left 1 - arguably wrong for directories,
-	   but it's the best we can do without reading the directory
-           contents.  1 yields the right result in GNU find, even
-	   without -noleaf option. */
-	if (S_ISREG(inode->i_mode)) {
-		inode->i_fop = &generic_ro_fops;
-		inode->i_data.a_ops = &cramfs_aops;
-	} else if (S_ISDIR(inode->i_mode)) {
-		inode->i_op = &cramfs_dir_inode_operations;
-		inode->i_fop = &cramfs_directory_operations;
-	} else if (S_ISLNK(inode->i_mode)) {
-		inode->i_op = &page_symlink_inode_operations;
-		inode->i_data.a_ops = &cramfs_aops;
-	} else {
-		inode->i_size = 0;
-		inode->i_blocks = 0;
-		init_special_inode(inode, inode->i_mode,
-			old_decode_dev(cramfs_inode->size));
-	}
 	return 0;
 }
 
@@ -104,12 +59,48 @@ static struct inode *get_cramfs_inode(struct super_block *sb,
 	struct inode *inode = iget5_locked(sb, CRAMINO(cramfs_inode),
 					    cramfs_iget5_test, cramfs_iget5_set,
 					    cramfs_inode);
+	static struct timespec zerotime;
+
 	if (inode && (inode->i_state & I_NEW)) {
+		inode->i_mode = cramfs_inode->mode;
+		inode->i_uid = cramfs_inode->uid;
+		inode->i_size = cramfs_inode->size;
+		inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
+		inode->i_gid = cramfs_inode->gid;
+		/* Struct copy intentional */
+		inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
+		/* inode->i_nlink is left 1 - arguably wrong for directories,
+		   but it's the best we can do without reading the directory
+		   contents.  1 yields the right result in GNU find, even
+		   without -noleaf option. */
+		if (S_ISREG(inode->i_mode)) {
+			inode->i_fop = &generic_ro_fops;
+			inode->i_data.a_ops = &cramfs_aops;
+		} else if (S_ISDIR(inode->i_mode)) {
+			inode->i_op = &cramfs_dir_inode_operations;
+			inode->i_fop = &cramfs_directory_operations;
+		} else if (S_ISLNK(inode->i_mode)) {
+			inode->i_op = &page_symlink_inode_operations;
+			inode->i_data.a_ops = &cramfs_aops;
+		} else {
+			inode->i_size = 0;
+			inode->i_blocks = 0;
+			init_special_inode(inode, inode->i_mode,
+				old_decode_dev(cramfs_inode->size));
+		}
 		unlock_new_inode(inode);
 	}
 	return inode;
 }
 
+static void cramfs_drop_inode(struct inode *inode)
+{
+	if (inode->i_ino == 1)
+		generic_delete_inode(inode);
+	else
+		generic_drop_inode(inode);
+}
+
 /*
  * We have our own block cache: don't fill up the buffer cache
  * with the rom-image, because the way the filesystem is set
@@ -534,6 +525,7 @@ static const struct super_operations cramfs_ops = {
 	.put_super	= cramfs_put_super,
 	.remount_fs	= cramfs_remount,
 	.statfs		= cramfs_statfs,
+	.drop_inode	= cramfs_drop_inode,
 };
 
 static int cramfs_get_sb(struct file_system_type *fs_type,
diff --git a/fs/dcache.c b/fs/dcache.c
index f2584d22cb4..80e93956ace 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1220,6 +1220,107 @@ struct dentry *d_splice_alias(struct inode *inode, struct dentry *dentry)
 	return new;
 }
 
+/**
+ * d_add_ci - lookup or allocate new dentry with case-exact name
+ * @inode:  the inode case-insensitive lookup has found
+ * @dentry: the negative dentry that was passed to the parent's lookup func
+ * @name:   the case-exact name to be associated with the returned dentry
+ *
+ * This is to avoid filling the dcache with case-insensitive names to the
+ * same inode, only the actual correct case is stored in the dcache for
+ * case-insensitive filesystems.
+ *
+ * For a case-insensitive lookup match and if the the case-exact dentry
+ * already exists in in the dcache, use it and return it.
+ *
+ * If no entry exists with the exact case name, allocate new dentry with
+ * the exact case, and return the spliced entry.
+ */
+struct dentry *d_add_ci(struct dentry *dentry, struct inode *inode,
+			struct qstr *name)
+{
+	int error;
+	struct dentry *found;
+	struct dentry *new;
+
+	/* Does a dentry matching the name exist already? */
+	found = d_hash_and_lookup(dentry->d_parent, name);
+	/* If not, create it now and return */
+	if (!found) {
+		new = d_alloc(dentry->d_parent, name);
+		if (!new) {
+			error = -ENOMEM;
+			goto err_out;
+		}
+		found = d_splice_alias(inode, new);
+		if (found) {
+			dput(new);
+			return found;
+		}
+		return new;
+	}
+	/* Matching dentry exists, check if it is negative. */
+	if (found->d_inode) {
+		if (unlikely(found->d_inode != inode)) {
+			/* This can't happen because bad inodes are unhashed. */
+			BUG_ON(!is_bad_inode(inode));
+			BUG_ON(!is_bad_inode(found->d_inode));
+		}
+		/*
+		 * Already have the inode and the dentry attached, decrement
+		 * the reference count to balance the iget() done
+		 * earlier on.  We found the dentry using d_lookup() so it
+		 * cannot be disconnected and thus we do not need to worry
+		 * about any NFS/disconnectedness issues here.
+		 */
+		iput(inode);
+		return found;
+	}
+	/*
+	 * Negative dentry: instantiate it unless the inode is a directory and
+	 * has a 'disconnected' dentry (i.e. IS_ROOT and DCACHE_DISCONNECTED),
+	 * in which case d_move() that in place of the found dentry.
+	 */
+	if (!S_ISDIR(inode->i_mode)) {
+		/* Not a directory; everything is easy. */
+		d_instantiate(found, inode);
+		return found;
+	}
+	spin_lock(&dcache_lock);
+	if (list_empty(&inode->i_dentry)) {
+		/*
+		 * Directory without a 'disconnected' dentry; we need to do
+		 * d_instantiate() by hand because it takes dcache_lock which
+		 * we already hold.
+		 */
+		list_add(&found->d_alias, &inode->i_dentry);
+		found->d_inode = inode;
+		spin_unlock(&dcache_lock);
+		security_d_instantiate(found, inode);
+		return found;
+	}
+	/*
+	 * Directory with a 'disconnected' dentry; get a reference to the
+	 * 'disconnected' dentry.
+	 */
+	new = list_entry(inode->i_dentry.next, struct dentry, d_alias);
+	dget_locked(new);
+	spin_unlock(&dcache_lock);
+	/* Do security vodoo. */
+	security_d_instantiate(found, inode);
+	/* Move new in place of found. */
+	d_move(new, found);
+	/* Balance the iget() we did above. */
+	iput(inode);
+	/* Throw away found. */
+	dput(found);
+	/* Use new as the actual dentry. */
+	return new;
+
+err_out:
+	iput(inode);
+	return ERR_PTR(error);
+}
 
 /**
  * d_lookup - search for a dentry
@@ -2254,6 +2355,7 @@ EXPORT_SYMBOL(d_path);
 EXPORT_SYMBOL(d_prune_aliases);
 EXPORT_SYMBOL(d_rehash);
 EXPORT_SYMBOL(d_splice_alias);
+EXPORT_SYMBOL(d_add_ci);
 EXPORT_SYMBOL(d_validate);
 EXPORT_SYMBOL(dget_locked);
 EXPORT_SYMBOL(dput);
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 285b64a8b06..488eb424f66 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -29,7 +29,7 @@
 #define DEVPTS_DEFAULT_MODE 0600
 
 extern int pty_limit;			/* Config limit on Unix98 ptys */
-static DEFINE_IDR(allocated_ptys);
+static DEFINE_IDA(allocated_ptys);
 static DEFINE_MUTEX(allocated_ptys_lock);
 
 static struct vfsmount *devpts_mnt;
@@ -180,24 +180,24 @@ static struct dentry *get_node(int num)
 int devpts_new_index(void)
 {
 	int index;
-	int idr_ret;
+	int ida_ret;
 
 retry:
-	if (!idr_pre_get(&allocated_ptys, GFP_KERNEL)) {
+	if (!ida_pre_get(&allocated_ptys, GFP_KERNEL)) {
 		return -ENOMEM;
 	}
 
 	mutex_lock(&allocated_ptys_lock);
-	idr_ret = idr_get_new(&allocated_ptys, NULL, &index);
-	if (idr_ret < 0) {
+	ida_ret = ida_get_new(&allocated_ptys, &index);
+	if (ida_ret < 0) {
 		mutex_unlock(&allocated_ptys_lock);
-		if (idr_ret == -EAGAIN)
+		if (ida_ret == -EAGAIN)
 			goto retry;
 		return -EIO;
 	}
 
 	if (index >= pty_limit) {
-		idr_remove(&allocated_ptys, index);
+		ida_remove(&allocated_ptys, index);
 		mutex_unlock(&allocated_ptys_lock);
 		return -EIO;
 	}
@@ -208,7 +208,7 @@ retry:
 void devpts_kill_index(int idx)
 {
 	mutex_lock(&allocated_ptys_lock);
-	idr_remove(&allocated_ptys, idx);
+	ida_remove(&allocated_ptys, idx);
 	mutex_unlock(&allocated_ptys_lock);
 }
 
diff --git a/fs/dlm/config.c b/fs/dlm/config.c
index c4e7d721bd8..89d2fb7b991 100644
--- a/fs/dlm/config.c
+++ b/fs/dlm/config.c
@@ -2,7 +2,7 @@
 *******************************************************************************
 **
 **  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
-**  Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
+**  Copyright (C) 2004-2008 Red Hat, Inc.  All rights reserved.
 **
 **  This copyrighted material is made available to anyone wishing to use,
 **  modify, copy, or redistribute it subject to the terms and conditions
@@ -30,16 +30,16 @@
 
 static struct config_group *space_list;
 static struct config_group *comm_list;
-static struct comm *local_comm;
+static struct dlm_comm *local_comm;
 
-struct clusters;
-struct cluster;
-struct spaces;
-struct space;
-struct comms;
-struct comm;
-struct nodes;
-struct node;
+struct dlm_clusters;
+struct dlm_cluster;
+struct dlm_spaces;
+struct dlm_space;
+struct dlm_comms;
+struct dlm_comm;
+struct dlm_nodes;
+struct dlm_node;
 
 static struct config_group *make_cluster(struct config_group *, const char *);
 static void drop_cluster(struct config_group *, struct config_item *);
@@ -68,17 +68,22 @@ static ssize_t show_node(struct config_item *i, struct configfs_attribute *a,
 static ssize_t store_node(struct config_item *i, struct configfs_attribute *a,
 			  const char *buf, size_t len);
 
-static ssize_t comm_nodeid_read(struct comm *cm, char *buf);
-static ssize_t comm_nodeid_write(struct comm *cm, const char *buf, size_t len);
-static ssize_t comm_local_read(struct comm *cm, char *buf);
-static ssize_t comm_local_write(struct comm *cm, const char *buf, size_t len);
-static ssize_t comm_addr_write(struct comm *cm, const char *buf, size_t len);
-static ssize_t node_nodeid_read(struct node *nd, char *buf);
-static ssize_t node_nodeid_write(struct node *nd, const char *buf, size_t len);
-static ssize_t node_weight_read(struct node *nd, char *buf);
-static ssize_t node_weight_write(struct node *nd, const char *buf, size_t len);
-
-struct cluster {
+static ssize_t comm_nodeid_read(struct dlm_comm *cm, char *buf);
+static ssize_t comm_nodeid_write(struct dlm_comm *cm, const char *buf,
+				size_t len);
+static ssize_t comm_local_read(struct dlm_comm *cm, char *buf);
+static ssize_t comm_local_write(struct dlm_comm *cm, const char *buf,
+				size_t len);
+static ssize_t comm_addr_write(struct dlm_comm *cm, const char *buf,
+				size_t len);
+static ssize_t node_nodeid_read(struct dlm_node *nd, char *buf);
+static ssize_t node_nodeid_write(struct dlm_node *nd, const char *buf,
+				size_t len);
+static ssize_t node_weight_read(struct dlm_node *nd, char *buf);
+static ssize_t node_weight_write(struct dlm_node *nd, const char *buf,
+				size_t len);
+
+struct dlm_cluster {
 	struct config_group group;
 	unsigned int cl_tcp_port;
 	unsigned int cl_buffer_size;
@@ -109,11 +114,11 @@ enum {
 
 struct cluster_attribute {
 	struct configfs_attribute attr;
-	ssize_t (*show)(struct cluster *, char *);
-	ssize_t (*store)(struct cluster *, const char *, size_t);
+	ssize_t (*show)(struct dlm_cluster *, char *);
+	ssize_t (*store)(struct dlm_cluster *, const char *, size_t);
 };
 
-static ssize_t cluster_set(struct cluster *cl, unsigned int *cl_field,
+static ssize_t cluster_set(struct dlm_cluster *cl, unsigned int *cl_field,
 			   int *info_field, int check_zero,
 			   const char *buf, size_t len)
 {
@@ -134,12 +139,12 @@ static ssize_t cluster_set(struct cluster *cl, unsigned int *cl_field,
 }
 
 #define CLUSTER_ATTR(name, check_zero)                                        \
-static ssize_t name##_write(struct cluster *cl, const char *buf, size_t len)  \
+static ssize_t name##_write(struct dlm_cluster *cl, const char *buf, size_t len) \
 {                                                                             \
 	return cluster_set(cl, &cl->cl_##name, &dlm_config.ci_##name,         \
 			   check_zero, buf, len);                             \
 }                                                                             \
-static ssize_t name##_read(struct cluster *cl, char *buf)                     \
+static ssize_t name##_read(struct dlm_cluster *cl, char *buf)                 \
 {                                                                             \
 	return snprintf(buf, PAGE_SIZE, "%u\n", cl->cl_##name);               \
 }                                                                             \
@@ -181,8 +186,8 @@ enum {
 
 struct comm_attribute {
 	struct configfs_attribute attr;
-	ssize_t (*show)(struct comm *, char *);
-	ssize_t (*store)(struct comm *, const char *, size_t);
+	ssize_t (*show)(struct dlm_comm *, char *);
+	ssize_t (*store)(struct dlm_comm *, const char *, size_t);
 };
 
 static struct comm_attribute comm_attr_nodeid = {
@@ -222,8 +227,8 @@ enum {
 
 struct node_attribute {
 	struct configfs_attribute attr;
-	ssize_t (*show)(struct node *, char *);
-	ssize_t (*store)(struct node *, const char *, size_t);
+	ssize_t (*show)(struct dlm_node *, char *);
+	ssize_t (*store)(struct dlm_node *, const char *, size_t);
 };
 
 static struct node_attribute node_attr_nodeid = {
@@ -248,26 +253,26 @@ static struct configfs_attribute *node_attrs[] = {
 	NULL,
 };
 
-struct clusters {
+struct dlm_clusters {
 	struct configfs_subsystem subsys;
 };
 
-struct spaces {
+struct dlm_spaces {
 	struct config_group ss_group;
 };
 
-struct space {
+struct dlm_space {
 	struct config_group group;
 	struct list_head members;
 	struct mutex members_lock;
 	int members_count;
 };
 
-struct comms {
+struct dlm_comms {
 	struct config_group cs_group;
 };
 
-struct comm {
+struct dlm_comm {
 	struct config_item item;
 	int nodeid;
 	int local;
@@ -275,11 +280,11 @@ struct comm {
 	struct sockaddr_storage *addr[DLM_MAX_ADDR_COUNT];
 };
 
-struct nodes {
+struct dlm_nodes {
 	struct config_group ns_group;
 };
 
-struct node {
+struct dlm_node {
 	struct config_item item;
 	struct list_head list; /* space->members */
 	int nodeid;
@@ -372,38 +377,40 @@ static struct config_item_type node_type = {
 	.ct_owner = THIS_MODULE,
 };
 
-static struct cluster *to_cluster(struct config_item *i)
+static struct dlm_cluster *to_cluster(struct config_item *i)
 {
-	return i ? container_of(to_config_group(i), struct cluster, group):NULL;
+	return i ? container_of(to_config_group(i), struct dlm_cluster, group) :
+		   NULL;
 }
 
-static struct space *to_space(struct config_item *i)
+static struct dlm_space *to_space(struct config_item *i)
 {
-	return i ? container_of(to_config_group(i), struct space, group) : NULL;
+	return i ? container_of(to_config_group(i), struct dlm_space, group) :
+		   NULL;
 }
 
-static struct comm *to_comm(struct config_item *i)
+static struct dlm_comm *to_comm(struct config_item *i)
 {
-	return i ? container_of(i, struct comm, item) : NULL;
+	return i ? container_of(i, struct dlm_comm, item) : NULL;
 }
 
-static struct node *to_node(struct config_item *i)
+static struct dlm_node *to_node(struct config_item *i)
 {
-	return i ? container_of(i, struct node, item) : NULL;
+	return i ? container_of(i, struct dlm_node, item) : NULL;
 }
 
 static struct config_group *make_cluster(struct config_group *g,
 					 const char *name)
 {
-	struct cluster *cl = NULL;
-	struct spaces *sps = NULL;
-	struct comms *cms = NULL;
+	struct dlm_cluster *cl = NULL;
+	struct dlm_spaces *sps = NULL;
+	struct dlm_comms *cms = NULL;
 	void *gps = NULL;
 
-	cl = kzalloc(sizeof(struct cluster), GFP_KERNEL);
+	cl = kzalloc(sizeof(struct dlm_cluster), GFP_KERNEL);
 	gps = kcalloc(3, sizeof(struct config_group *), GFP_KERNEL);
-	sps = kzalloc(sizeof(struct spaces), GFP_KERNEL);
-	cms = kzalloc(sizeof(struct comms), GFP_KERNEL);
+	sps = kzalloc(sizeof(struct dlm_spaces), GFP_KERNEL);
+	cms = kzalloc(sizeof(struct dlm_comms), GFP_KERNEL);
 
 	if (!cl || !gps || !sps || !cms)
 		goto fail;
@@ -443,7 +450,7 @@ static struct config_group *make_cluster(struct config_group *g,
 
 static void drop_cluster(struct config_group *g, struct config_item *i)
 {
-	struct cluster *cl = to_cluster(i);
+	struct dlm_cluster *cl = to_cluster(i);
 	struct config_item *tmp;
 	int j;
 
@@ -461,20 +468,20 @@ static void drop_cluster(struct config_group *g, struct config_item *i)
 
 static void release_cluster(struct config_item *i)
 {
-	struct cluster *cl = to_cluster(i);
+	struct dlm_cluster *cl = to_cluster(i);
 	kfree(cl->group.default_groups);
 	kfree(cl);
 }
 
 static struct config_group *make_space(struct config_group *g, const char *name)
 {
-	struct space *sp = NULL;
-	struct nodes *nds = NULL;
+	struct dlm_space *sp = NULL;
+	struct dlm_nodes *nds = NULL;
 	void *gps = NULL;
 
-	sp = kzalloc(sizeof(struct space), GFP_KERNEL);
+	sp = kzalloc(sizeof(struct dlm_space), GFP_KERNEL);
 	gps = kcalloc(2, sizeof(struct config_group *), GFP_KERNEL);
-	nds = kzalloc(sizeof(struct nodes), GFP_KERNEL);
+	nds = kzalloc(sizeof(struct dlm_nodes), GFP_KERNEL);
 
 	if (!sp || !gps || !nds)
 		goto fail;
@@ -500,7 +507,7 @@ static struct config_group *make_space(struct config_group *g, const char *name)
 
 static void drop_space(struct config_group *g, struct config_item *i)
 {
-	struct space *sp = to_space(i);
+	struct dlm_space *sp = to_space(i);
 	struct config_item *tmp;
 	int j;
 
@@ -517,16 +524,16 @@ static void drop_space(struct config_group *g, struct config_item *i)
 
 static void release_space(struct config_item *i)
 {
-	struct space *sp = to_space(i);
+	struct dlm_space *sp = to_space(i);
 	kfree(sp->group.default_groups);
 	kfree(sp);
 }
 
 static struct config_item *make_comm(struct config_group *g, const char *name)
 {
-	struct comm *cm;
+	struct dlm_comm *cm;
 
-	cm = kzalloc(sizeof(struct comm), GFP_KERNEL);
+	cm = kzalloc(sizeof(struct dlm_comm), GFP_KERNEL);
 	if (!cm)
 		return ERR_PTR(-ENOMEM);
 
@@ -539,7 +546,7 @@ static struct config_item *make_comm(struct config_group *g, const char *name)
 
 static void drop_comm(struct config_group *g, struct config_item *i)
 {
-	struct comm *cm = to_comm(i);
+	struct dlm_comm *cm = to_comm(i);
 	if (local_comm == cm)
 		local_comm = NULL;
 	dlm_lowcomms_close(cm->nodeid);
@@ -550,16 +557,16 @@ static void drop_comm(struct config_group *g, struct config_item *i)
 
 static void release_comm(struct config_item *i)
 {
-	struct comm *cm = to_comm(i);
+	struct dlm_comm *cm = to_comm(i);
 	kfree(cm);
 }
 
 static struct config_item *make_node(struct config_group *g, const char *name)
 {
-	struct space *sp = to_space(g->cg_item.ci_parent);
-	struct node *nd;
+	struct dlm_space *sp = to_space(g->cg_item.ci_parent);
+	struct dlm_node *nd;
 
-	nd = kzalloc(sizeof(struct node), GFP_KERNEL);
+	nd = kzalloc(sizeof(struct dlm_node), GFP_KERNEL);
 	if (!nd)
 		return ERR_PTR(-ENOMEM);
 
@@ -578,8 +585,8 @@ static struct config_item *make_node(struct config_group *g, const char *name)
 
 static void drop_node(struct config_group *g, struct config_item *i)
 {
-	struct space *sp = to_space(g->cg_item.ci_parent);
-	struct node *nd = to_node(i);
+	struct dlm_space *sp = to_space(g->cg_item.ci_parent);
+	struct dlm_node *nd = to_node(i);
 
 	mutex_lock(&sp->members_lock);
 	list_del(&nd->list);
@@ -591,11 +598,11 @@ static void drop_node(struct config_group *g, struct config_item *i)
 
 static void release_node(struct config_item *i)
 {
-	struct node *nd = to_node(i);
+	struct dlm_node *nd = to_node(i);
 	kfree(nd);
 }
 
-static struct clusters clusters_root = {
+static struct dlm_clusters clusters_root = {
 	.subsys = {
 		.su_group = {
 			.cg_item = {
@@ -625,7 +632,7 @@ void dlm_config_exit(void)
 static ssize_t show_cluster(struct config_item *i, struct configfs_attribute *a,
 			    char *buf)
 {
-	struct cluster *cl = to_cluster(i);
+	struct dlm_cluster *cl = to_cluster(i);
 	struct cluster_attribute *cla =
 			container_of(a, struct cluster_attribute, attr);
 	return cla->show ? cla->show(cl, buf) : 0;
@@ -635,7 +642,7 @@ static ssize_t store_cluster(struct config_item *i,
 			     struct configfs_attribute *a,
 			     const char *buf, size_t len)
 {
-	struct cluster *cl = to_cluster(i);
+	struct dlm_cluster *cl = to_cluster(i);
 	struct cluster_attribute *cla =
 		container_of(a, struct cluster_attribute, attr);
 	return cla->store ? cla->store(cl, buf, len) : -EINVAL;
@@ -644,7 +651,7 @@ static ssize_t store_cluster(struct config_item *i,
 static ssize_t show_comm(struct config_item *i, struct configfs_attribute *a,
 			 char *buf)
 {
-	struct comm *cm = to_comm(i);
+	struct dlm_comm *cm = to_comm(i);
 	struct comm_attribute *cma =
 			container_of(a, struct comm_attribute, attr);
 	return cma->show ? cma->show(cm, buf) : 0;
@@ -653,29 +660,31 @@ static ssize_t show_comm(struct config_item *i, struct configfs_attribute *a,
 static ssize_t store_comm(struct config_item *i, struct configfs_attribute *a,
 			  const char *buf, size_t len)
 {
-	struct comm *cm = to_comm(i);
+	struct dlm_comm *cm = to_comm(i);
 	struct comm_attribute *cma =
 		container_of(a, struct comm_attribute, attr);
 	return cma->store ? cma->store(cm, buf, len) : -EINVAL;
 }
 
-static ssize_t comm_nodeid_read(struct comm *cm, char *buf)
+static ssize_t comm_nodeid_read(struct dlm_comm *cm, char *buf)
 {
 	return sprintf(buf, "%d\n", cm->nodeid);
 }
 
-static ssize_t comm_nodeid_write(struct comm *cm, const char *buf, size_t len)
+static ssize_t comm_nodeid_write(struct dlm_comm *cm, const char *buf,
+				 size_t len)
 {
 	cm->nodeid = simple_strtol(buf, NULL, 0);
 	return len;
 }
 
-static ssize_t comm_local_read(struct comm *cm, char *buf)
+static ssize_t comm_local_read(struct dlm_comm *cm, char *buf)
 {
 	return sprintf(buf, "%d\n", cm->local);
 }
 
-static ssize_t comm_local_write(struct comm *cm, const char *buf, size_t len)
+static ssize_t comm_local_write(struct dlm_comm *cm, const char *buf,
+				size_t len)
 {
 	cm->local= simple_strtol(buf, NULL, 0);
 	if (cm->local && !local_comm)
@@ -683,7 +692,7 @@ static ssize_t comm_local_write(struct comm *cm, const char *buf, size_t len)
 	return len;
 }
 
-static ssize_t comm_addr_write(struct comm *cm, const char *buf, size_t len)
+static ssize_t comm_addr_write(struct dlm_comm *cm, const char *buf, size_t len)
 {
 	struct sockaddr_storage *addr;
 
@@ -705,7 +714,7 @@ static ssize_t comm_addr_write(struct comm *cm, const char *buf, size_t len)
 static ssize_t show_node(struct config_item *i, struct configfs_attribute *a,
 			 char *buf)
 {
-	struct node *nd = to_node(i);
+	struct dlm_node *nd = to_node(i);
 	struct node_attribute *nda =
 			container_of(a, struct node_attribute, attr);
 	return nda->show ? nda->show(nd, buf) : 0;
@@ -714,29 +723,31 @@ static ssize_t show_node(struct config_item *i, struct configfs_attribute *a,
 static ssize_t store_node(struct config_item *i, struct configfs_attribute *a,
 			  const char *buf, size_t len)
 {
-	struct node *nd = to_node(i);
+	struct dlm_node *nd = to_node(i);
 	struct node_attribute *nda =
 		container_of(a, struct node_attribute, attr);
 	return nda->store ? nda->store(nd, buf, len) : -EINVAL;
 }
 
-static ssize_t node_nodeid_read(struct node *nd, char *buf)
+static ssize_t node_nodeid_read(struct dlm_node *nd, char *buf)
 {
 	return sprintf(buf, "%d\n", nd->nodeid);
 }
 
-static ssize_t node_nodeid_write(struct node *nd, const char *buf, size_t len)
+static ssize_t node_nodeid_write(struct dlm_node *nd, const char *buf,
+				 size_t len)
 {
 	nd->nodeid = simple_strtol(buf, NULL, 0);
 	return len;
 }
 
-static ssize_t node_weight_read(struct node *nd, char *buf)
+static ssize_t node_weight_read(struct dlm_node *nd, char *buf)
 {
 	return sprintf(buf, "%d\n", nd->weight);
 }
 
-static ssize_t node_weight_write(struct node *nd, const char *buf, size_t len)
+static ssize_t node_weight_write(struct dlm_node *nd, const char *buf,
+				 size_t len)
 {
 	nd->weight = simple_strtol(buf, NULL, 0);
 	return len;
@@ -746,7 +757,7 @@ static ssize_t node_weight_write(struct node *nd, const char *buf, size_t len)
  * Functions for the dlm to get the info that's been configured
  */
 
-static struct space *get_space(char *name)
+static struct dlm_space *get_space(char *name)
 {
 	struct config_item *i;
 
@@ -760,15 +771,15 @@ static struct space *get_space(char *name)
 	return to_space(i);
 }
 
-static void put_space(struct space *sp)
+static void put_space(struct dlm_space *sp)
 {
 	config_item_put(&sp->group.cg_item);
 }
 
-static struct comm *get_comm(int nodeid, struct sockaddr_storage *addr)
+static struct dlm_comm *get_comm(int nodeid, struct sockaddr_storage *addr)
 {
 	struct config_item *i;
-	struct comm *cm = NULL;
+	struct dlm_comm *cm = NULL;
 	int found = 0;
 
 	if (!comm_list)
@@ -801,7 +812,7 @@ static struct comm *get_comm(int nodeid, struct sockaddr_storage *addr)
 	return cm;
 }
 
-static void put_comm(struct comm *cm)
+static void put_comm(struct dlm_comm *cm)
 {
 	config_item_put(&cm->item);
 }
@@ -810,8 +821,8 @@ static void put_comm(struct comm *cm)
 int dlm_nodeid_list(char *lsname, int **ids_out, int *ids_count_out,
 		    int **new_out, int *new_count_out)
 {
-	struct space *sp;
-	struct node *nd;
+	struct dlm_space *sp;
+	struct dlm_node *nd;
 	int i = 0, rv = 0, ids_count = 0, new_count = 0;
 	int *ids, *new;
 
@@ -874,8 +885,8 @@ int dlm_nodeid_list(char *lsname, int **ids_out, int *ids_count_out,
 
 int dlm_node_weight(char *lsname, int nodeid)
 {
-	struct space *sp;
-	struct node *nd;
+	struct dlm_space *sp;
+	struct dlm_node *nd;
 	int w = -EEXIST;
 
 	sp = get_space(lsname);
@@ -897,7 +908,7 @@ int dlm_node_weight(char *lsname, int nodeid)
 
 int dlm_nodeid_to_addr(int nodeid, struct sockaddr_storage *addr)
 {
-	struct comm *cm = get_comm(nodeid, NULL);
+	struct dlm_comm *cm = get_comm(nodeid, NULL);
 	if (!cm)
 		return -EEXIST;
 	if (!cm->addr_count)
@@ -909,7 +920,7 @@ int dlm_nodeid_to_addr(int nodeid, struct sockaddr_storage *addr)
 
 int dlm_addr_to_nodeid(struct sockaddr_storage *addr, int *nodeid)
 {
-	struct comm *cm = get_comm(0, addr);
+	struct dlm_comm *cm = get_comm(0, addr);
 	if (!cm)
 		return -EEXIST;
 	*nodeid = cm->nodeid;
diff --git a/fs/dlm/user.c b/fs/dlm/user.c
index 929e48ae759..34f14a14fb4 100644
--- a/fs/dlm/user.c
+++ b/fs/dlm/user.c
@@ -527,8 +527,10 @@ static ssize_t device_write(struct file *file, const char __user *buf,
 		k32buf = (struct dlm_write_request32 *)kbuf;
 		kbuf = kmalloc(count + 1 + (sizeof(struct dlm_write_request) -
 			       sizeof(struct dlm_write_request32)), GFP_KERNEL);
-		if (!kbuf)
+		if (!kbuf) {
+			kfree(k32buf);
 			return -ENOMEM;
+		}
 
 		if (proc)
 			set_bit(DLM_PROC_FLAGS_COMPAT, &proc->flags);
@@ -539,8 +541,10 @@ static ssize_t device_write(struct file *file, const char __user *buf,
 
 	/* do we really need this? can a write happen after a close? */
 	if ((kbuf->cmd == DLM_USER_LOCK || kbuf->cmd == DLM_USER_UNLOCK) &&
-	    (proc && test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags)))
-		return -EINVAL;
+	    (proc && test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))) {
+		error = -EINVAL;
+		goto out_free;
+	}
 
 	sigfillset(&allsigs);
 	sigprocmask(SIG_BLOCK, &allsigs, &tmpsig);
diff --git a/fs/dquot.c b/fs/dquot.c
index 1346eebe74c..8ec4d6cc763 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -1793,6 +1793,21 @@ static int vfs_quota_on_remount(struct super_block *sb, int type)
 	return ret;
 }
 
+int vfs_quota_on_path(struct super_block *sb, int type, int format_id,
+		      struct path *path)
+{
+	int error = security_quota_on(path->dentry);
+	if (error)
+		return error;
+	/* Quota file not on the same filesystem? */
+	if (path->mnt->mnt_sb != sb)
+		error = -EXDEV;
+	else
+		error = vfs_quota_on_inode(path->dentry->d_inode, type,
+					   format_id);
+	return error;
+}
+
 /* Actual function called from quotactl() */
 int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path,
 		 int remount)
@@ -1804,19 +1819,10 @@ int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path,
 		return vfs_quota_on_remount(sb, type);
 
 	error = path_lookup(path, LOOKUP_FOLLOW, &nd);
-	if (error < 0)
-		return error;
-	error = security_quota_on(nd.path.dentry);
-	if (error)
-		goto out_path;
-	/* Quota file not on the same filesystem? */
-	if (nd.path.mnt->mnt_sb != sb)
-		error = -EXDEV;
-	else
-		error = vfs_quota_on_inode(nd.path.dentry->d_inode, type,
-					   format_id);
-out_path:
-	path_put(&nd.path);
+	if (!error) {
+		error = vfs_quota_on_path(sb, type, format_id, &nd.path);
+		path_put(&nd.path);
+	}
 	return error;
 }
 
@@ -2185,6 +2191,7 @@ EXPORT_SYMBOL(unregister_quota_format);
 EXPORT_SYMBOL(dqstats);
 EXPORT_SYMBOL(dq_data_lock);
 EXPORT_SYMBOL(vfs_quota_on);
+EXPORT_SYMBOL(vfs_quota_on_path);
 EXPORT_SYMBOL(vfs_quota_on_mount);
 EXPORT_SYMBOL(vfs_quota_off);
 EXPORT_SYMBOL(vfs_quota_sync);
diff --git a/fs/efs/namei.c b/fs/efs/namei.c
index 3a404e7fad5..291abb11e20 100644
--- a/fs/efs/namei.c
+++ b/fs/efs/namei.c
@@ -74,8 +74,7 @@ struct dentry *efs_lookup(struct inode *dir, struct dentry *dentry, struct namei
 	}
 	unlock_kernel();
 
-	d_add(dentry, inode);
-	return NULL;
+	return d_splice_alias(inode, dentry);
 }
 
 static struct inode *efs_nfs_get_inode(struct super_block *sb, u64 ino,
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 0c87474f791..7cc0eb756b5 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1041,10 +1041,7 @@ retry:
 }
 
 /*
- * It opens an eventpoll file descriptor. The "size" parameter is there
- * for historical reasons, when epoll was using an hash instead of an
- * RB tree. With the current implementation, the "size" parameter is ignored
- * (besides sanity checks).
+ * Open an eventpoll file descriptor.
  */
 asmlinkage long sys_epoll_create1(int flags)
 {
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 8ddced38467..f38a5afc39a 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2810,8 +2810,9 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id,
 		journal_unlock_updates(EXT3_SB(sb)->s_journal);
 	}
 
+	err = vfs_quota_on_path(sb, type, format_id, &nd.path);
 	path_put(&nd.path);
-	return vfs_quota_on(sb, type, format_id, path, remount);
+	return err;
 }
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c
index c7d04e16544..694ed6fadcc 100644
--- a/fs/ext4/acl.c
+++ b/fs/ext4/acl.c
@@ -40,34 +40,35 @@ ext4_acl_from_disk(const void *value, size_t size)
 	acl = posix_acl_alloc(count, GFP_NOFS);
 	if (!acl)
 		return ERR_PTR(-ENOMEM);
-	for (n=0; n < count; n++) {
+	for (n = 0; n < count; n++) {
 		ext4_acl_entry *entry =
 			(ext4_acl_entry *)value;
 		if ((char *)value + sizeof(ext4_acl_entry_short) > end)
 			goto fail;
 		acl->a_entries[n].e_tag  = le16_to_cpu(entry->e_tag);
 		acl->a_entries[n].e_perm = le16_to_cpu(entry->e_perm);
-		switch(acl->a_entries[n].e_tag) {
-			case ACL_USER_OBJ:
-			case ACL_GROUP_OBJ:
-			case ACL_MASK:
-			case ACL_OTHER:
-				value = (char *)value +
-					sizeof(ext4_acl_entry_short);
-				acl->a_entries[n].e_id = ACL_UNDEFINED_ID;
-				break;
-
-			case ACL_USER:
-			case ACL_GROUP:
-				value = (char *)value + sizeof(ext4_acl_entry);
-				if ((char *)value > end)
-					goto fail;
-				acl->a_entries[n].e_id =
-					le32_to_cpu(entry->e_id);
-				break;
-
-			default:
+
+		switch (acl->a_entries[n].e_tag) {
+		case ACL_USER_OBJ:
+		case ACL_GROUP_OBJ:
+		case ACL_MASK:
+		case ACL_OTHER:
+			value = (char *)value +
+				sizeof(ext4_acl_entry_short);
+			acl->a_entries[n].e_id = ACL_UNDEFINED_ID;
+			break;
+
+		case ACL_USER:
+		case ACL_GROUP:
+			value = (char *)value + sizeof(ext4_acl_entry);
+			if ((char *)value > end)
 				goto fail;
+			acl->a_entries[n].e_id =
+				le32_to_cpu(entry->e_id);
+			break;
+
+		default:
+			goto fail;
 		}
 	}
 	if (value != end)
@@ -96,27 +97,26 @@ ext4_acl_to_disk(const struct posix_acl *acl, size_t *size)
 		return ERR_PTR(-ENOMEM);
 	ext_acl->a_version = cpu_to_le32(EXT4_ACL_VERSION);
 	e = (char *)ext_acl + sizeof(ext4_acl_header);
-	for (n=0; n < acl->a_count; n++) {
+	for (n = 0; n < acl->a_count; n++) {
 		ext4_acl_entry *entry = (ext4_acl_entry *)e;
 		entry->e_tag  = cpu_to_le16(acl->a_entries[n].e_tag);
 		entry->e_perm = cpu_to_le16(acl->a_entries[n].e_perm);
-		switch(acl->a_entries[n].e_tag) {
-			case ACL_USER:
-			case ACL_GROUP:
-				entry->e_id =
-					cpu_to_le32(acl->a_entries[n].e_id);
-				e += sizeof(ext4_acl_entry);
-				break;
-
-			case ACL_USER_OBJ:
-			case ACL_GROUP_OBJ:
-			case ACL_MASK:
-			case ACL_OTHER:
-				e += sizeof(ext4_acl_entry_short);
-				break;
-
-			default:
-				goto fail;
+		switch (acl->a_entries[n].e_tag) {
+		case ACL_USER:
+		case ACL_GROUP:
+			entry->e_id = cpu_to_le32(acl->a_entries[n].e_id);
+			e += sizeof(ext4_acl_entry);
+			break;
+
+		case ACL_USER_OBJ:
+		case ACL_GROUP_OBJ:
+		case ACL_MASK:
+		case ACL_OTHER:
+			e += sizeof(ext4_acl_entry_short);
+			break;
+
+		default:
+			goto fail;
 		}
 	}
 	return (char *)ext_acl;
@@ -167,23 +167,23 @@ ext4_get_acl(struct inode *inode, int type)
 	if (!test_opt(inode->i_sb, POSIX_ACL))
 		return NULL;
 
-	switch(type) {
-		case ACL_TYPE_ACCESS:
-			acl = ext4_iget_acl(inode, &ei->i_acl);
-			if (acl != EXT4_ACL_NOT_CACHED)
-				return acl;
-			name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
-			break;
-
-		case ACL_TYPE_DEFAULT:
-			acl = ext4_iget_acl(inode, &ei->i_default_acl);
-			if (acl != EXT4_ACL_NOT_CACHED)
-				return acl;
-			name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
-			break;
-
-		default:
-			return ERR_PTR(-EINVAL);
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		acl = ext4_iget_acl(inode, &ei->i_acl);
+		if (acl != EXT4_ACL_NOT_CACHED)
+			return acl;
+		name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
+		break;
+
+	case ACL_TYPE_DEFAULT:
+		acl = ext4_iget_acl(inode, &ei->i_default_acl);
+		if (acl != EXT4_ACL_NOT_CACHED)
+			return acl;
+		name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
+		break;
+
+	default:
+		return ERR_PTR(-EINVAL);
 	}
 	retval = ext4_xattr_get(inode, name_index, "", NULL, 0);
 	if (retval > 0) {
@@ -201,14 +201,14 @@ ext4_get_acl(struct inode *inode, int type)
 	kfree(value);
 
 	if (!IS_ERR(acl)) {
-		switch(type) {
-			case ACL_TYPE_ACCESS:
-				ext4_iset_acl(inode, &ei->i_acl, acl);
-				break;
-
-			case ACL_TYPE_DEFAULT:
-				ext4_iset_acl(inode, &ei->i_default_acl, acl);
-				break;
+		switch (type) {
+		case ACL_TYPE_ACCESS:
+			ext4_iset_acl(inode, &ei->i_acl, acl);
+			break;
+
+		case ACL_TYPE_DEFAULT:
+			ext4_iset_acl(inode, &ei->i_default_acl, acl);
+			break;
 		}
 	}
 	return acl;
@@ -232,31 +232,31 @@ ext4_set_acl(handle_t *handle, struct inode *inode, int type,
 	if (S_ISLNK(inode->i_mode))
 		return -EOPNOTSUPP;
 
-	switch(type) {
-		case ACL_TYPE_ACCESS:
-			name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
-			if (acl) {
-				mode_t mode = inode->i_mode;
-				error = posix_acl_equiv_mode(acl, &mode);
-				if (error < 0)
-					return error;
-				else {
-					inode->i_mode = mode;
-					ext4_mark_inode_dirty(handle, inode);
-					if (error == 0)
-						acl = NULL;
-				}
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
+		if (acl) {
+			mode_t mode = inode->i_mode;
+			error = posix_acl_equiv_mode(acl, &mode);
+			if (error < 0)
+				return error;
+			else {
+				inode->i_mode = mode;
+				ext4_mark_inode_dirty(handle, inode);
+				if (error == 0)
+					acl = NULL;
 			}
-			break;
+		}
+		break;
 
-		case ACL_TYPE_DEFAULT:
-			name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
-			if (!S_ISDIR(inode->i_mode))
-				return acl ? -EACCES : 0;
-			break;
+	case ACL_TYPE_DEFAULT:
+		name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
+		if (!S_ISDIR(inode->i_mode))
+			return acl ? -EACCES : 0;
+		break;
 
-		default:
-			return -EINVAL;
+	default:
+		return -EINVAL;
 	}
 	if (acl) {
 		value = ext4_acl_to_disk(acl, &size);
@@ -269,14 +269,14 @@ ext4_set_acl(handle_t *handle, struct inode *inode, int type,
 
 	kfree(value);
 	if (!error) {
-		switch(type) {
-			case ACL_TYPE_ACCESS:
-				ext4_iset_acl(inode, &ei->i_acl, acl);
-				break;
-
-			case ACL_TYPE_DEFAULT:
-				ext4_iset_acl(inode, &ei->i_default_acl, acl);
-				break;
+		switch (type) {
+		case ACL_TYPE_ACCESS:
+			ext4_iset_acl(inode, &ei->i_acl, acl);
+			break;
+
+		case ACL_TYPE_DEFAULT:
+			ext4_iset_acl(inode, &ei->i_default_acl, acl);
+			break;
 		}
 	}
 	return error;
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 495ab21b983..e9fa960ba6d 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -314,25 +314,28 @@ ext4_read_block_bitmap(struct super_block *sb, ext4_group_t block_group)
 	if (unlikely(!bh)) {
 		ext4_error(sb, __func__,
 			    "Cannot read block bitmap - "
-			    "block_group = %d, block_bitmap = %llu",
-			    (int)block_group, (unsigned long long)bitmap_blk);
+			    "block_group = %lu, block_bitmap = %llu",
+			    block_group, bitmap_blk);
 		return NULL;
 	}
 	if (bh_uptodate_or_lock(bh))
 		return bh;
 
+	spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group));
 	if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
 		ext4_init_block_bitmap(sb, bh, block_group, desc);
 		set_buffer_uptodate(bh);
 		unlock_buffer(bh);
+		spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
 		return bh;
 	}
+	spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
 	if (bh_submit_read(bh) < 0) {
 		put_bh(bh);
 		ext4_error(sb, __func__,
 			    "Cannot read block bitmap - "
-			    "block_group = %d, block_bitmap = %llu",
-			    (int)block_group, (unsigned long long)bitmap_blk);
+			    "block_group = %lu, block_bitmap = %llu",
+			    block_group, bitmap_blk);
 		return NULL;
 	}
 	ext4_valid_block_bitmap(sb, desc, block_group, bh);
@@ -1623,6 +1626,9 @@ ext4_fsblk_t ext4_has_free_blocks(struct ext4_sb_info *sbi,
 		free_blocks =
 			percpu_counter_sum_and_set(&sbi->s_freeblocks_counter);
 #endif
+	if (free_blocks <= root_blocks)
+		/* we don't have free space */
+		return 0;
 	if (free_blocks - root_blocks < nblocks)
 		return free_blocks - root_blocks;
 	return nblocks;
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index d3d23d73c08..ec8e33b4521 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -411,7 +411,7 @@ static int call_filldir(struct file * filp, void * dirent,
 				get_dtype(sb, fname->file_type));
 		if (error) {
 			filp->f_pos = curr_pos;
-			info->extra_fname = fname->next;
+			info->extra_fname = fname;
 			return error;
 		}
 		fname = fname->next;
@@ -450,11 +450,21 @@ static int ext4_dx_readdir(struct file * filp,
 	 * If there are any leftover names on the hash collision
 	 * chain, return them first.
 	 */
-	if (info->extra_fname &&
-	    call_filldir(filp, dirent, filldir, info->extra_fname))
-		goto finished;
+	if (info->extra_fname) {
+		if (call_filldir(filp, dirent, filldir, info->extra_fname))
+			goto finished;
 
-	if (!info->curr_node)
+		info->extra_fname = NULL;
+		info->curr_node = rb_next(info->curr_node);
+		if (!info->curr_node) {
+			if (info->next_hash == ~0) {
+				filp->f_pos = EXT4_HTREE_EOF;
+				goto finished;
+			}
+			info->curr_hash = info->next_hash;
+			info->curr_minor_hash = 0;
+		}
+	} else if (!info->curr_node)
 		info->curr_node = rb_first(&info->root);
 
 	while (1) {
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 303e41cf7b1..295003241d3 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1044,7 +1044,6 @@ extern void ext4_mb_update_group_info(struct ext4_group_info *grp,
 
 
 /* inode.c */
-void ext4_da_release_space(struct inode *inode, int used, int to_free);
 int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
 		struct buffer_head *bh, ext4_fsblk_t blocknr);
 struct buffer_head *ext4_getblk(handle_t *, struct inode *,
@@ -1073,6 +1072,8 @@ extern void ext4_set_inode_flags(struct inode *);
 extern void ext4_get_inode_flags(struct ext4_inode_info *);
 extern void ext4_set_aops(struct inode *inode);
 extern int ext4_writepage_trans_blocks(struct inode *);
+extern int ext4_meta_trans_blocks(struct inode *, int nrblocks, int idxblocks);
+extern int ext4_chunk_trans_blocks(struct inode *, int nrblocks);
 extern int ext4_block_truncate_page(handle_t *handle,
 		struct address_space *mapping, loff_t from);
 extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct page *page);
@@ -1228,6 +1229,8 @@ extern const struct inode_operations ext4_fast_symlink_inode_operations;
 /* extents.c */
 extern int ext4_ext_tree_init(handle_t *handle, struct inode *);
 extern int ext4_ext_writepage_trans_blocks(struct inode *, int);
+extern int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks,
+				       int chunk);
 extern int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 			ext4_lblk_t iblock,
 			unsigned long max_blocks, struct buffer_head *bh_result,
diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index 6c166c0a54b..d33dc56d698 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -216,7 +216,9 @@ extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks);
 extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
 extern void ext4_ext_store_pblock(struct ext4_extent *, ext4_fsblk_t);
 extern int ext4_extent_tree_init(handle_t *, struct inode *);
-extern int ext4_ext_calc_credits_for_insert(struct inode *, struct ext4_ext_path *);
+extern int ext4_ext_calc_credits_for_single_extent(struct inode *inode,
+						   int num,
+						   struct ext4_ext_path *path);
 extern int ext4_ext_try_to_merge(struct inode *inode,
 				 struct ext4_ext_path *path,
 				 struct ext4_extent *);
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index eb8bc3afe6e..b455c685a98 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -51,6 +51,14 @@
 					 EXT4_XATTR_TRANS_BLOCKS - 2 + \
 					 2*EXT4_QUOTA_TRANS_BLOCKS(sb))
 
+/*
+ * Define the number of metadata blocks we need to account to modify data.
+ *
+ * This include super block, inode block, quota blocks and xattr blocks
+ */
+#define EXT4_META_TRANS_BLOCKS(sb)	(EXT4_XATTR_TRANS_BLOCKS + \
+					2*EXT4_QUOTA_TRANS_BLOCKS(sb))
+
 /* Delete operations potentially hit one directory's namespace plus an
  * entire inode, plus arbitrary amounts of bitmap/indirection data.  Be
  * generous.  We can grow the delete transaction later if necessary. */
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 42c4c0c892e..b24d3c53f20 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -99,7 +99,7 @@ static int ext4_ext_journal_restart(handle_t *handle, int needed)
 	if (handle->h_buffer_credits > needed)
 		return 0;
 	err = ext4_journal_extend(handle, needed);
-	if (err)
+	if (err <= 0)
 		return err;
 	return ext4_journal_restart(handle, needed);
 }
@@ -1441,7 +1441,7 @@ unsigned int ext4_ext_check_overlap(struct inode *inode,
 
 	/*
 	 * get the next allocated block if the extent in the path
-	 * is before the requested block(s) 
+	 * is before the requested block(s)
 	 */
 	if (b2 < b1) {
 		b2 = ext4_ext_next_allocated_block(path);
@@ -1747,54 +1747,61 @@ static int ext4_ext_rm_idx(handle_t *handle, struct inode *inode,
 }
 
 /*
- * ext4_ext_calc_credits_for_insert:
- * This routine returns max. credits that the extent tree can consume.
- * It should be OK for low-performance paths like ->writepage()
- * To allow many writing processes to fit into a single transaction,
- * the caller should calculate credits under i_data_sem and
- * pass the actual path.
+ * ext4_ext_calc_credits_for_single_extent:
+ * This routine returns max. credits that needed to insert an extent
+ * to the extent tree.
+ * When pass the actual path, the caller should calculate credits
+ * under i_data_sem.
  */
-int ext4_ext_calc_credits_for_insert(struct inode *inode,
+int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int nrblocks,
 						struct ext4_ext_path *path)
 {
-	int depth, needed;
-
 	if (path) {
+		int depth = ext_depth(inode);
+		int ret = 0;
+
 		/* probably there is space in leaf? */
-		depth = ext_depth(inode);
 		if (le16_to_cpu(path[depth].p_hdr->eh_entries)
-				< le16_to_cpu(path[depth].p_hdr->eh_max))
-			return 1;
-	}
-
-	/*
-	 * given 32-bit logical block (4294967296 blocks), max. tree
-	 * can be 4 levels in depth -- 4 * 340^4 == 53453440000.
-	 * Let's also add one more level for imbalance.
-	 */
-	depth = 5;
+				< le16_to_cpu(path[depth].p_hdr->eh_max)) {
 
-	/* allocation of new data block(s) */
-	needed = 2;
+			/*
+			 *  There are some space in the leaf tree, no
+			 *  need to account for leaf block credit
+			 *
+			 *  bitmaps and block group descriptor blocks
+			 *  and other metadat blocks still need to be
+			 *  accounted.
+			 */
+			/* 1 bitmap, 1 block group descriptor */
+			ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
+		}
+	}
 
-	/*
-	 * tree can be full, so it would need to grow in depth:
-	 * we need one credit to modify old root, credits for
-	 * new root will be added in split accounting
-	 */
-	needed += 1;
+	return ext4_chunk_trans_blocks(inode, nrblocks);
+}
 
-	/*
-	 * Index split can happen, we would need:
-	 *    allocate intermediate indexes (bitmap + group)
-	 *  + change two blocks at each level, but root (already included)
-	 */
-	needed += (depth * 2) + (depth * 2);
+/*
+ * How many index/leaf blocks need to change/allocate to modify nrblocks?
+ *
+ * if nrblocks are fit in a single extent (chunk flag is 1), then
+ * in the worse case, each tree level index/leaf need to be changed
+ * if the tree split due to insert a new extent, then the old tree
+ * index/leaf need to be updated too
+ *
+ * If the nrblocks are discontiguous, they could cause
+ * the whole tree split more than once, but this is really rare.
+ */
+int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+	int index;
+	int depth = ext_depth(inode);
 
-	/* any allocation modifies superblock */
-	needed += 1;
+	if (chunk)
+		index = depth * 2;
+	else
+		index = depth * 3;
 
-	return needed;
+	return index;
 }
 
 static int ext4_remove_blocks(handle_t *handle, struct inode *inode,
@@ -1910,16 +1917,18 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
 			BUG_ON(b != ex_ee_block + ex_ee_len - 1);
 		}
 
-		/* at present, extent can't cross block group: */
-		/* leaf + bitmap + group desc + sb + inode */
-		credits = 5;
+		/*
+		 * 3 for leaf, sb, and inode plus 2 (bmap and group
+		 * descriptor) for each block group; assume two block
+		 * groups plus ex_ee_len/blocks_per_block_group for
+		 * the worst case
+		 */
+		credits = 7 + 2*(ex_ee_len/EXT4_BLOCKS_PER_GROUP(inode->i_sb));
 		if (ex == EXT_FIRST_EXTENT(eh)) {
 			correct_index = 1;
 			credits += (ext_depth(inode)) + 1;
 		}
-#ifdef CONFIG_QUOTA
 		credits += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
 
 		err = ext4_ext_journal_restart(handle, credits);
 		if (err)
@@ -2323,7 +2332,10 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 		unsigned int newdepth;
 		/* If extent has less than EXT4_EXT_ZERO_LEN zerout directly */
 		if (allocated <= EXT4_EXT_ZERO_LEN) {
-			/* Mark first half uninitialized.
+			/*
+			 * iblock == ee_block is handled by the zerouout
+			 * at the beginning.
+			 * Mark first half uninitialized.
 			 * Mark second half initialized and zero out the
 			 * initialized extent
 			 */
@@ -2346,7 +2358,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 				ex->ee_len   = orig_ex.ee_len;
 				ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
 				ext4_ext_dirty(handle, inode, path + depth);
-				/* zeroed the full extent */
+				/* blocks available from iblock */
 				return allocated;
 
 			} else if (err)
@@ -2374,6 +2386,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 					err = PTR_ERR(path);
 					return err;
 				}
+				/* get the second half extent details */
 				ex = path[depth].p_ext;
 				err = ext4_ext_get_access(handle, inode,
 								path + depth);
@@ -2403,6 +2416,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 			ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
 			ext4_ext_dirty(handle, inode, path + depth);
 			/* zeroed the full extent */
+			/* blocks available from iblock */
 			return allocated;
 
 		} else if (err)
@@ -2418,23 +2432,22 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 		 */
 		orig_ex.ee_len = cpu_to_le16(ee_len -
 						ext4_ext_get_actual_len(ex3));
-		if (newdepth != depth) {
-			depth = newdepth;
-			ext4_ext_drop_refs(path);
-			path = ext4_ext_find_extent(inode, iblock, path);
-			if (IS_ERR(path)) {
-				err = PTR_ERR(path);
-				goto out;
-			}
-			eh = path[depth].p_hdr;
-			ex = path[depth].p_ext;
-			if (ex2 != &newex)
-				ex2 = ex;
-
-			err = ext4_ext_get_access(handle, inode, path + depth);
-			if (err)
-				goto out;
+		depth = newdepth;
+		ext4_ext_drop_refs(path);
+		path = ext4_ext_find_extent(inode, iblock, path);
+		if (IS_ERR(path)) {
+			err = PTR_ERR(path);
+			goto out;
 		}
+		eh = path[depth].p_hdr;
+		ex = path[depth].p_ext;
+		if (ex2 != &newex)
+			ex2 = ex;
+
+		err = ext4_ext_get_access(handle, inode, path + depth);
+		if (err)
+			goto out;
+
 		allocated = max_blocks;
 
 		/* If extent has less than EXT4_EXT_ZERO_LEN and we are trying
@@ -2452,6 +2465,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 			ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
 			ext4_ext_dirty(handle, inode, path + depth);
 			/* zero out the first half */
+			/* blocks available from iblock */
 			return allocated;
 		}
 	}
@@ -2796,7 +2810,7 @@ void ext4_ext_truncate(struct inode *inode)
 	/*
 	 * probably first extent we're gonna free will be last in block
 	 */
-	err = ext4_writepage_trans_blocks(inode) + 3;
+	err = ext4_writepage_trans_blocks(inode);
 	handle = ext4_journal_start(inode, err);
 	if (IS_ERR(handle))
 		return;
@@ -2810,7 +2824,7 @@ void ext4_ext_truncate(struct inode *inode)
 	down_write(&EXT4_I(inode)->i_data_sem);
 	ext4_ext_invalidate_cache(inode);
 
-	ext4_mb_discard_inode_preallocations(inode);
+	ext4_discard_reservation(inode);
 
 	/*
 	 * TODO: optimization is possible here.
@@ -2849,27 +2863,6 @@ out_stop:
 	ext4_journal_stop(handle);
 }
 
-/*
- * ext4_ext_writepage_trans_blocks:
- * calculate max number of blocks we could modify
- * in order to allocate new block for an inode
- */
-int ext4_ext_writepage_trans_blocks(struct inode *inode, int num)
-{
-	int needed;
-
-	needed = ext4_ext_calc_credits_for_insert(inode, NULL);
-
-	/* caller wants to allocate num blocks, but note it includes sb */
-	needed = needed * num - (num - 1);
-
-#ifdef CONFIG_QUOTA
-	needed += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
-
-	return needed;
-}
-
 static void ext4_falloc_update_inode(struct inode *inode,
 				int mode, loff_t new_size, int update_ctime)
 {
@@ -2930,10 +2923,9 @@ long ext4_fallocate(struct inode *inode, int mode, loff_t offset, loff_t len)
 	max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
 							- block;
 	/*
-	 * credits to insert 1 extent into extent tree + buffers to be able to
-	 * modify 1 super block, 1 block bitmap and 1 group descriptor.
+	 * credits to insert 1 extent into extent tree
 	 */
-	credits = EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + 3;
+	credits = ext4_chunk_trans_blocks(inode, max_blocks);
 	mutex_lock(&inode->i_mutex);
 retry:
 	while (ret >= 0 && ret < max_blocks) {
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index a92eb305344..f344834bbf5 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -97,34 +97,44 @@ unsigned ext4_init_inode_bitmap(struct super_block *sb, struct buffer_head *bh,
  * Return buffer_head of bitmap on success or NULL.
  */
 static struct buffer_head *
-read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
+ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
 {
 	struct ext4_group_desc *desc;
 	struct buffer_head *bh = NULL;
+	ext4_fsblk_t bitmap_blk;
 
 	desc = ext4_get_group_desc(sb, block_group, NULL);
 	if (!desc)
-		goto error_out;
-	if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) {
-		bh = sb_getblk(sb, ext4_inode_bitmap(sb, desc));
-		if (!buffer_uptodate(bh)) {
-			lock_buffer(bh);
-			if (!buffer_uptodate(bh)) {
-				ext4_init_inode_bitmap(sb, bh, block_group,
-						       desc);
-				set_buffer_uptodate(bh);
-			}
-			unlock_buffer(bh);
-		}
-	} else {
-		bh = sb_bread(sb, ext4_inode_bitmap(sb, desc));
+		return NULL;
+	bitmap_blk = ext4_inode_bitmap(sb, desc);
+	bh = sb_getblk(sb, bitmap_blk);
+	if (unlikely(!bh)) {
+		ext4_error(sb, __func__,
+			    "Cannot read inode bitmap - "
+			    "block_group = %lu, inode_bitmap = %llu",
+			    block_group, bitmap_blk);
+		return NULL;
 	}
-	if (!bh)
-		ext4_error(sb, "read_inode_bitmap",
+	if (bh_uptodate_or_lock(bh))
+		return bh;
+
+	spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group));
+	if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) {
+		ext4_init_inode_bitmap(sb, bh, block_group, desc);
+		set_buffer_uptodate(bh);
+		unlock_buffer(bh);
+		spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
+		return bh;
+	}
+	spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
+	if (bh_submit_read(bh) < 0) {
+		put_bh(bh);
+		ext4_error(sb, __func__,
 			    "Cannot read inode bitmap - "
 			    "block_group = %lu, inode_bitmap = %llu",
-			    block_group, ext4_inode_bitmap(sb, desc));
-error_out:
+			    block_group, bitmap_blk);
+		return NULL;
+	}
 	return bh;
 }
 
@@ -200,7 +210,7 @@ void ext4_free_inode (handle_t *handle, struct inode * inode)
 	}
 	block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb);
 	bit = (ino - 1) % EXT4_INODES_PER_GROUP(sb);
-	bitmap_bh = read_inode_bitmap(sb, block_group);
+	bitmap_bh = ext4_read_inode_bitmap(sb, block_group);
 	if (!bitmap_bh)
 		goto error_return;
 
@@ -341,7 +351,7 @@ find_close_to_parent:
 			goto found_flexbg;
 		}
 
-		if (best_flex < 0 ||
+		if (flex_group[best_flex].free_inodes == 0 ||
 		    (flex_group[i].free_blocks >
 		     flex_group[best_flex].free_blocks &&
 		     flex_group[i].free_inodes))
@@ -623,7 +633,7 @@ got_group:
 			goto fail;
 
 		brelse(bitmap_bh);
-		bitmap_bh = read_inode_bitmap(sb, group);
+		bitmap_bh = ext4_read_inode_bitmap(sb, group);
 		if (!bitmap_bh)
 			goto fail;
 
@@ -728,7 +738,7 @@ got:
 
 			/* When marking the block group with
 			 * ~EXT4_BG_INODE_UNINIT we don't want to depend
-			 * on the value of bg_itable_unsed even though
+			 * on the value of bg_itable_unused even though
 			 * mke2fs could have initialized the same for us.
 			 * Instead we calculated the value below
 			 */
@@ -891,7 +901,7 @@ struct inode *ext4_orphan_get(struct super_block *sb, unsigned long ino)
 
 	block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb);
 	bit = (ino - 1) % EXT4_INODES_PER_GROUP(sb);
-	bitmap_bh = read_inode_bitmap(sb, block_group);
+	bitmap_bh = ext4_read_inode_bitmap(sb, block_group);
 	if (!bitmap_bh) {
 		ext4_warning(sb, __func__,
 			     "inode bitmap error for orphan %lu", ino);
@@ -969,7 +979,7 @@ unsigned long ext4_count_free_inodes (struct super_block * sb)
 			continue;
 		desc_count += le16_to_cpu(gdp->bg_free_inodes_count);
 		brelse(bitmap_bh);
-		bitmap_bh = read_inode_bitmap(sb, i);
+		bitmap_bh = ext4_read_inode_bitmap(sb, i);
 		if (!bitmap_bh)
 			continue;
 
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 9843b046c23..7e91913e325 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -41,6 +41,8 @@
 #include "acl.h"
 #include "ext4_extents.h"
 
+#define MPAGE_DA_EXTENT_TAIL 0x01
+
 static inline int ext4_begin_ordered_truncate(struct inode *inode,
 					      loff_t new_size)
 {
@@ -191,6 +193,7 @@ static int ext4_journal_test_restart(handle_t *handle, struct inode *inode)
 void ext4_delete_inode (struct inode * inode)
 {
 	handle_t *handle;
+	int err;
 
 	if (ext4_should_order_data(inode))
 		ext4_begin_ordered_truncate(inode, 0);
@@ -199,8 +202,9 @@ void ext4_delete_inode (struct inode * inode)
 	if (is_bad_inode(inode))
 		goto no_delete;
 
-	handle = start_transaction(inode);
+	handle = ext4_journal_start(inode, blocks_for_truncate(inode)+3);
 	if (IS_ERR(handle)) {
+		ext4_std_error(inode->i_sb, PTR_ERR(handle));
 		/*
 		 * If we're going to skip the normal cleanup, we still need to
 		 * make sure that the in-core orphan linked list is properly
@@ -213,8 +217,34 @@ void ext4_delete_inode (struct inode * inode)
 	if (IS_SYNC(inode))
 		handle->h_sync = 1;
 	inode->i_size = 0;
+	err = ext4_mark_inode_dirty(handle, inode);
+	if (err) {
+		ext4_warning(inode->i_sb, __func__,
+			     "couldn't mark inode dirty (err %d)", err);
+		goto stop_handle;
+	}
 	if (inode->i_blocks)
 		ext4_truncate(inode);
+
+	/*
+	 * ext4_ext_truncate() doesn't reserve any slop when it
+	 * restarts journal transactions; therefore there may not be
+	 * enough credits left in the handle to remove the inode from
+	 * the orphan list and set the dtime field.
+	 */
+	if (handle->h_buffer_credits < 3) {
+		err = ext4_journal_extend(handle, 3);
+		if (err > 0)
+			err = ext4_journal_restart(handle, 3);
+		if (err != 0) {
+			ext4_warning(inode->i_sb, __func__,
+				     "couldn't extend journal (err %d)", err);
+		stop_handle:
+			ext4_journal_stop(handle);
+			goto no_delete;
+		}
+	}
+
 	/*
 	 * Kill off the orphan record which ext4_truncate created.
 	 * AKPM: I think this can be inside the above `if'.
@@ -952,23 +982,74 @@ out:
 	return err;
 }
 
-/* Maximum number of blocks we map for direct IO at once. */
-#define DIO_MAX_BLOCKS 4096
 /*
- * Number of credits we need for writing DIO_MAX_BLOCKS:
- * We need sb + group descriptor + bitmap + inode -> 4
- * For B blocks with A block pointers per block we need:
- * 1 (triple ind.) + (B/A/A + 2) (doubly ind.) + (B/A + 2) (indirect).
- * If we plug in 4096 for B and 256 for A (for 1KB block size), we get 25.
+ * Calculate the number of metadata blocks need to reserve
+ * to allocate @blocks for non extent file based file
  */
-#define DIO_CREDITS 25
+static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks)
+{
+	int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb);
+	int ind_blks, dind_blks, tind_blks;
+
+	/* number of new indirect blocks needed */
+	ind_blks = (blocks + icap - 1) / icap;
+
+	dind_blks = (ind_blks + icap - 1) / icap;
 
+	tind_blks = 1;
+
+	return ind_blks + dind_blks + tind_blks;
+}
 
 /*
+ * Calculate the number of metadata blocks need to reserve
+ * to allocate given number of blocks
+ */
+static int ext4_calc_metadata_amount(struct inode *inode, int blocks)
+{
+	if (!blocks)
+		return 0;
+
+	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
+		return ext4_ext_calc_metadata_amount(inode, blocks);
+
+	return ext4_indirect_calc_metadata_amount(inode, blocks);
+}
+
+static void ext4_da_update_reserve_space(struct inode *inode, int used)
+{
+	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+	int total, mdb, mdb_free;
+
+	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
+	/* recalculate the number of metablocks still need to be reserved */
+	total = EXT4_I(inode)->i_reserved_data_blocks - used;
+	mdb = ext4_calc_metadata_amount(inode, total);
+
+	/* figure out how many metablocks to release */
+	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
+	mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb;
+
+	/* Account for allocated meta_blocks */
+	mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks;
+
+	/* update fs free blocks counter for truncate case */
+	percpu_counter_add(&sbi->s_freeblocks_counter, mdb_free);
+
+	/* update per-inode reservations */
+	BUG_ON(used  > EXT4_I(inode)->i_reserved_data_blocks);
+	EXT4_I(inode)->i_reserved_data_blocks -= used;
+
+	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
+	EXT4_I(inode)->i_reserved_meta_blocks = mdb;
+	EXT4_I(inode)->i_allocated_meta_blocks = 0;
+	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+}
+
+/*
+ * The ext4_get_blocks_wrap() function try to look up the requested blocks,
+ * and returns if the blocks are already mapped.
  *
- *
- * ext4_ext4 get_block() wrapper function
- * It will do a look up first, and returns if the blocks already mapped.
  * Otherwise it takes the write lock of the i_data_sem and allocate blocks
  * and store the allocated blocks in the result buffer head and mark it
  * mapped.
@@ -1069,26 +1150,30 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 		 * which were deferred till now
 		 */
 		if ((retval > 0) && buffer_delay(bh))
-			ext4_da_release_space(inode, retval, 0);
+			ext4_da_update_reserve_space(inode, retval);
 	}
 
 	up_write((&EXT4_I(inode)->i_data_sem));
 	return retval;
 }
 
+/* Maximum number of blocks we map for direct IO at once. */
+#define DIO_MAX_BLOCKS 4096
+
 static int ext4_get_block(struct inode *inode, sector_t iblock,
 			struct buffer_head *bh_result, int create)
 {
 	handle_t *handle = ext4_journal_current_handle();
 	int ret = 0, started = 0;
 	unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
+	int dio_credits;
 
 	if (create && !handle) {
 		/* Direct IO write... */
 		if (max_blocks > DIO_MAX_BLOCKS)
 			max_blocks = DIO_MAX_BLOCKS;
-		handle = ext4_journal_start(inode, DIO_CREDITS +
-			      2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb));
+		dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
+		handle = ext4_journal_start(inode, dio_credits);
 		if (IS_ERR(handle)) {
 			ret = PTR_ERR(handle);
 			goto out;
@@ -1336,12 +1421,8 @@ static int ext4_ordered_write_end(struct file *file,
 {
 	handle_t *handle = ext4_journal_current_handle();
 	struct inode *inode = mapping->host;
-	unsigned from, to;
 	int ret = 0, ret2;
 
-	from = pos & (PAGE_CACHE_SIZE - 1);
-	to = from + len;
-
 	ret = ext4_jbd2_file_inode(handle, inode);
 
 	if (ret == 0) {
@@ -1437,36 +1518,6 @@ static int ext4_journalled_write_end(struct file *file,
 
 	return ret ? ret : copied;
 }
-/*
- * Calculate the number of metadata blocks need to reserve
- * to allocate @blocks for non extent file based file
- */
-static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks)
-{
-	int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb);
-	int ind_blks, dind_blks, tind_blks;
-
-	/* number of new indirect blocks needed */
-	ind_blks = (blocks + icap - 1) / icap;
-
-	dind_blks = (ind_blks + icap - 1) / icap;
-
-	tind_blks = 1;
-
-	return ind_blks + dind_blks + tind_blks;
-}
-
-/*
- * Calculate the number of metadata blocks need to reserve
- * to allocate given number of blocks
- */
-static int ext4_calc_metadata_amount(struct inode *inode, int blocks)
-{
-	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
-		return ext4_ext_calc_metadata_amount(inode, blocks);
-
-	return ext4_indirect_calc_metadata_amount(inode, blocks);
-}
 
 static int ext4_da_reserve_space(struct inode *inode, int nrblocks)
 {
@@ -1490,7 +1541,6 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks)
 		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
 		return -ENOSPC;
 	}
-
 	/* reduce fs free blocks counter */
 	percpu_counter_sub(&sbi->s_freeblocks_counter, total);
 
@@ -1501,35 +1551,49 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks)
 	return 0;       /* success */
 }
 
-void ext4_da_release_space(struct inode *inode, int used, int to_free)
+static void ext4_da_release_space(struct inode *inode, int to_free)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 	int total, mdb, mdb_free, release;
 
+	if (!to_free)
+		return;		/* Nothing to release, exit */
+
 	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
+
+	if (!EXT4_I(inode)->i_reserved_data_blocks) {
+		/*
+		 * if there is no reserved blocks, but we try to free some
+		 * then the counter is messed up somewhere.
+		 * but since this function is called from invalidate
+		 * page, it's harmless to return without any action
+		 */
+		printk(KERN_INFO "ext4 delalloc try to release %d reserved "
+			    "blocks for inode %lu, but there is no reserved "
+			    "data blocks\n", to_free, inode->i_ino);
+		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+		return;
+	}
+
 	/* recalculate the number of metablocks still need to be reserved */
-	total = EXT4_I(inode)->i_reserved_data_blocks - used - to_free;
+	total = EXT4_I(inode)->i_reserved_data_blocks - to_free;
 	mdb = ext4_calc_metadata_amount(inode, total);
 
 	/* figure out how many metablocks to release */
 	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
 	mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb;
 
-	/* Account for allocated meta_blocks */
-	mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks;
-
 	release = to_free + mdb_free;
 
 	/* update fs free blocks counter for truncate case */
 	percpu_counter_add(&sbi->s_freeblocks_counter, release);
 
 	/* update per-inode reservations */
-	BUG_ON(used + to_free > EXT4_I(inode)->i_reserved_data_blocks);
-	EXT4_I(inode)->i_reserved_data_blocks -= (used + to_free);
+	BUG_ON(to_free > EXT4_I(inode)->i_reserved_data_blocks);
+	EXT4_I(inode)->i_reserved_data_blocks -= to_free;
 
 	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks);
 	EXT4_I(inode)->i_reserved_meta_blocks = mdb;
-	EXT4_I(inode)->i_allocated_meta_blocks = 0;
 	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
 }
 
@@ -1551,7 +1615,7 @@ static void ext4_da_page_release_reservation(struct page *page,
 		}
 		curr_off = next_off;
 	} while ((bh = bh->b_this_page) != head);
-	ext4_da_release_space(page->mapping->host, 0, to_release);
+	ext4_da_release_space(page->mapping->host, to_release);
 }
 
 /*
@@ -1564,11 +1628,13 @@ struct mpage_da_data {
 	unsigned long first_page, next_page;	/* extent of pages */
 	get_block_t *get_block;
 	struct writeback_control *wbc;
+	int io_done;
+	long pages_written;
 };
 
 /*
  * mpage_da_submit_io - walks through extent of pages and try to write
- * them with __mpage_writepage()
+ * them with writepage() call back
  *
  * @mpd->inode: inode
  * @mpd->first_page: first page of the extent
@@ -1583,18 +1649,11 @@ struct mpage_da_data {
 static int mpage_da_submit_io(struct mpage_da_data *mpd)
 {
 	struct address_space *mapping = mpd->inode->i_mapping;
-	struct mpage_data mpd_pp = {
-		.bio = NULL,
-		.last_block_in_bio = 0,
-		.get_block = mpd->get_block,
-		.use_writepage = 1,
-	};
 	int ret = 0, err, nr_pages, i;
 	unsigned long index, end;
 	struct pagevec pvec;
 
 	BUG_ON(mpd->next_page <= mpd->first_page);
-
 	pagevec_init(&pvec, 0);
 	index = mpd->first_page;
 	end = mpd->next_page - 1;
@@ -1612,8 +1671,9 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd)
 				break;
 			index++;
 
-			err = __mpage_writepage(page, mpd->wbc, &mpd_pp);
-
+			err = mapping->a_ops->writepage(page, mpd->wbc);
+			if (!err)
+				mpd->pages_written++;
 			/*
 			 * In error case, we have to continue because
 			 * remaining pages are still locked
@@ -1624,9 +1684,6 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd)
 		}
 		pagevec_release(&pvec);
 	}
-	if (mpd_pp.bio)
-		mpage_bio_submit(WRITE, mpd_pp.bio);
-
 	return ret;
 }
 
@@ -1649,7 +1706,7 @@ static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical,
 	int blocks = exbh->b_size >> inode->i_blkbits;
 	sector_t pblock = exbh->b_blocknr, cur_logical;
 	struct buffer_head *head, *bh;
-	unsigned long index, end;
+	pgoff_t index, end;
 	struct pagevec pvec;
 	int nr_pages, i;
 
@@ -1692,6 +1749,13 @@ static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical,
 				if (buffer_delay(bh)) {
 					bh->b_blocknr = pblock;
 					clear_buffer_delay(bh);
+					bh->b_bdev = inode->i_sb->s_bdev;
+				} else if (buffer_unwritten(bh)) {
+					bh->b_blocknr = pblock;
+					clear_buffer_unwritten(bh);
+					set_buffer_mapped(bh);
+					set_buffer_new(bh);
+					bh->b_bdev = inode->i_sb->s_bdev;
 				} else if (buffer_mapped(bh))
 					BUG_ON(bh->b_blocknr != pblock);
 
@@ -1727,13 +1791,11 @@ static inline void __unmap_underlying_blocks(struct inode *inode,
  *
  * The function skips space we know is already mapped to disk blocks.
  *
- * The function ignores errors ->get_block() returns, thus real
- * error handling is postponed to __mpage_writepage()
  */
 static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 {
+	int err = 0;
 	struct buffer_head *lbh = &mpd->lbh;
-	int err = 0, remain = lbh->b_size;
 	sector_t next = lbh->b_blocknr;
 	struct buffer_head new;
 
@@ -1743,38 +1805,36 @@ static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 	if (buffer_mapped(lbh) && !buffer_delay(lbh))
 		return;
 
-	while (remain) {
-		new.b_state = lbh->b_state;
-		new.b_blocknr = 0;
-		new.b_size = remain;
-		err = mpd->get_block(mpd->inode, next, &new, 1);
-		if (err) {
-			/*
-			 * Rather than implement own error handling
-			 * here, we just leave remaining blocks
-			 * unallocated and try again with ->writepage()
-			 */
-			break;
-		}
-		BUG_ON(new.b_size == 0);
+	new.b_state = lbh->b_state;
+	new.b_blocknr = 0;
+	new.b_size = lbh->b_size;
 
-		if (buffer_new(&new))
-			__unmap_underlying_blocks(mpd->inode, &new);
+	/*
+	 * If we didn't accumulate anything
+	 * to write simply return
+	 */
+	if (!new.b_size)
+		return;
+	err = mpd->get_block(mpd->inode, next, &new, 1);
+	if (err)
+		return;
+	BUG_ON(new.b_size == 0);
 
-		/*
-		 * If blocks are delayed marked, we need to
-		 * put actual blocknr and drop delayed bit
-		 */
-		if (buffer_delay(lbh))
-			mpage_put_bnr_to_bhs(mpd, next, &new);
+	if (buffer_new(&new))
+		__unmap_underlying_blocks(mpd->inode, &new);
 
-		/* go for the remaining blocks */
-		next += new.b_size >> mpd->inode->i_blkbits;
-		remain -= new.b_size;
-	}
+	/*
+	 * If blocks are delayed marked, we need to
+	 * put actual blocknr and drop delayed bit
+	 */
+	if (buffer_delay(lbh) || buffer_unwritten(lbh))
+		mpage_put_bnr_to_bhs(mpd, next, &new);
+
+	return;
 }
 
-#define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | (1 << BH_Delay))
+#define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | \
+		(1 << BH_Delay) | (1 << BH_Unwritten))
 
 /*
  * mpage_add_bh_to_extent - try to add one more block to extent of blocks
@@ -1788,41 +1848,61 @@ static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 static void mpage_add_bh_to_extent(struct mpage_da_data *mpd,
 				   sector_t logical, struct buffer_head *bh)
 {
-	struct buffer_head *lbh = &mpd->lbh;
 	sector_t next;
+	size_t b_size = bh->b_size;
+	struct buffer_head *lbh = &mpd->lbh;
+	int nrblocks = lbh->b_size >> mpd->inode->i_blkbits;
 
-	next = lbh->b_blocknr + (lbh->b_size >> mpd->inode->i_blkbits);
-
+	/* check if thereserved journal credits might overflow */
+	if (!(EXT4_I(mpd->inode)->i_flags & EXT4_EXTENTS_FL)) {
+		if (nrblocks >= EXT4_MAX_TRANS_DATA) {
+			/*
+			 * With non-extent format we are limited by the journal
+			 * credit available.  Total credit needed to insert
+			 * nrblocks contiguous blocks is dependent on the
+			 * nrblocks.  So limit nrblocks.
+			 */
+			goto flush_it;
+		} else if ((nrblocks + (b_size >> mpd->inode->i_blkbits)) >
+				EXT4_MAX_TRANS_DATA) {
+			/*
+			 * Adding the new buffer_head would make it cross the
+			 * allowed limit for which we have journal credit
+			 * reserved. So limit the new bh->b_size
+			 */
+			b_size = (EXT4_MAX_TRANS_DATA - nrblocks) <<
+						mpd->inode->i_blkbits;
+			/* we will do mpage_da_submit_io in the next loop */
+		}
+	}
 	/*
 	 * First block in the extent
 	 */
 	if (lbh->b_size == 0) {
 		lbh->b_blocknr = logical;
-		lbh->b_size = bh->b_size;
+		lbh->b_size = b_size;
 		lbh->b_state = bh->b_state & BH_FLAGS;
 		return;
 	}
 
+	next = lbh->b_blocknr + nrblocks;
 	/*
 	 * Can we merge the block to our big extent?
 	 */
 	if (logical == next && (bh->b_state & BH_FLAGS) == lbh->b_state) {
-		lbh->b_size += bh->b_size;
+		lbh->b_size += b_size;
 		return;
 	}
 
+flush_it:
 	/*
 	 * We couldn't merge the block to our extent, so we
 	 * need to flush current  extent and start new one
 	 */
 	mpage_da_map_blocks(mpd);
-
-	/*
-	 * Now start a new extent
-	 */
-	lbh->b_size = bh->b_size;
-	lbh->b_state = bh->b_state & BH_FLAGS;
-	lbh->b_blocknr = logical;
+	mpage_da_submit_io(mpd);
+	mpd->io_done = 1;
+	return;
 }
 
 /*
@@ -1842,17 +1922,35 @@ static int __mpage_da_writepage(struct page *page,
 	struct buffer_head *bh, *head, fake;
 	sector_t logical;
 
+	if (mpd->io_done) {
+		/*
+		 * Rest of the page in the page_vec
+		 * redirty then and skip then. We will
+		 * try to to write them again after
+		 * starting a new transaction
+		 */
+		redirty_page_for_writepage(wbc, page);
+		unlock_page(page);
+		return MPAGE_DA_EXTENT_TAIL;
+	}
 	/*
 	 * Can we merge this page to current extent?
 	 */
 	if (mpd->next_page != page->index) {
 		/*
 		 * Nope, we can't. So, we map non-allocated blocks
-		 * and start IO on them using __mpage_writepage()
+		 * and start IO on them using writepage()
 		 */
 		if (mpd->next_page != mpd->first_page) {
 			mpage_da_map_blocks(mpd);
 			mpage_da_submit_io(mpd);
+			/*
+			 * skip rest of the page in the page_vec
+			 */
+			mpd->io_done = 1;
+			redirty_page_for_writepage(wbc, page);
+			unlock_page(page);
+			return MPAGE_DA_EXTENT_TAIL;
 		}
 
 		/*
@@ -1883,6 +1981,8 @@ static int __mpage_da_writepage(struct page *page,
 		set_buffer_dirty(bh);
 		set_buffer_uptodate(bh);
 		mpage_add_bh_to_extent(mpd, logical, bh);
+		if (mpd->io_done)
+			return MPAGE_DA_EXTENT_TAIL;
 	} else {
 		/*
 		 * Page with regular buffer heads, just add all dirty ones
@@ -1891,8 +1991,12 @@ static int __mpage_da_writepage(struct page *page,
 		bh = head;
 		do {
 			BUG_ON(buffer_locked(bh));
-			if (buffer_dirty(bh))
+			if (buffer_dirty(bh) &&
+				(!buffer_mapped(bh) || buffer_delay(bh))) {
 				mpage_add_bh_to_extent(mpd, logical, bh);
+				if (mpd->io_done)
+					return MPAGE_DA_EXTENT_TAIL;
+			}
 			logical++;
 		} while ((bh = bh->b_this_page) != head);
 	}
@@ -1911,22 +2015,13 @@ static int __mpage_da_writepage(struct page *page,
  *
  * This is a library function, which implements the writepages()
  * address_space_operation.
- *
- * In order to avoid duplication of logic that deals with partial pages,
- * multiple bio per page, etc, we find non-allocated blocks, allocate
- * them with minimal calls to ->get_block() and re-use __mpage_writepage()
- *
- * It's important that we call __mpage_writepage() only once for each
- * involved page, otherwise we'd have to implement more complicated logic
- * to deal with pages w/o PG_lock or w/ PG_writeback and so on.
- *
- * See comments to mpage_writepages()
  */
 static int mpage_da_writepages(struct address_space *mapping,
 			       struct writeback_control *wbc,
 			       get_block_t get_block)
 {
 	struct mpage_da_data mpd;
+	long to_write;
 	int ret;
 
 	if (!get_block)
@@ -1940,17 +2035,22 @@ static int mpage_da_writepages(struct address_space *mapping,
 	mpd.first_page = 0;
 	mpd.next_page = 0;
 	mpd.get_block = get_block;
+	mpd.io_done = 0;
+	mpd.pages_written = 0;
+
+	to_write = wbc->nr_to_write;
 
 	ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, &mpd);
 
 	/*
 	 * Handle last extent of pages
 	 */
-	if (mpd.next_page != mpd.first_page) {
+	if (!mpd.io_done && mpd.next_page != mpd.first_page) {
 		mpage_da_map_blocks(&mpd);
 		mpage_da_submit_io(&mpd);
 	}
 
+	wbc->nr_to_write = to_write - mpd.pages_written;
 	return ret;
 }
 
@@ -2155,63 +2255,95 @@ static int ext4_da_writepage(struct page *page,
 }
 
 /*
- * For now just follow the DIO way to estimate the max credits
- * needed to write out EXT4_MAX_WRITEBACK_PAGES.
- * todo: need to calculate the max credits need for
- * extent based files, currently the DIO credits is based on
- * indirect-blocks mapping way.
- *
- * Probably should have a generic way to calculate credits
- * for DIO, writepages, and truncate
+ * This is called via ext4_da_writepages() to
+ * calulate the total number of credits to reserve to fit
+ * a single extent allocation into a single transaction,
+ * ext4_da_writpeages() will loop calling this before
+ * the block allocation.
  */
-#define EXT4_MAX_WRITEBACK_PAGES      DIO_MAX_BLOCKS
-#define EXT4_MAX_WRITEBACK_CREDITS    DIO_CREDITS
+
+static int ext4_da_writepages_trans_blocks(struct inode *inode)
+{
+	int max_blocks = EXT4_I(inode)->i_reserved_data_blocks;
+
+	/*
+	 * With non-extent format the journal credit needed to
+	 * insert nrblocks contiguous block is dependent on
+	 * number of contiguous block. So we will limit
+	 * number of contiguous block to a sane value
+	 */
+	if (!(inode->i_flags & EXT4_EXTENTS_FL) &&
+	    (max_blocks > EXT4_MAX_TRANS_DATA))
+		max_blocks = EXT4_MAX_TRANS_DATA;
+
+	return ext4_chunk_trans_blocks(inode, max_blocks);
+}
 
 static int ext4_da_writepages(struct address_space *mapping,
-				struct writeback_control *wbc)
+			      struct writeback_control *wbc)
 {
-	struct inode *inode = mapping->host;
 	handle_t *handle = NULL;
-	int needed_blocks;
-	int ret = 0;
-	long to_write;
 	loff_t range_start = 0;
+	struct inode *inode = mapping->host;
+	int needed_blocks, ret = 0, nr_to_writebump = 0;
+	long to_write, pages_skipped = 0;
+	struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
 
 	/*
 	 * No pages to write? This is mainly a kludge to avoid starting
 	 * a transaction for special inodes like journal inode on last iput()
 	 * because that could violate lock ordering on umount
 	 */
-	if (!mapping->nrpages)
+	if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
 		return 0;
-
 	/*
-	 * Estimate the worse case needed credits to write out
-	 * EXT4_MAX_BUF_BLOCKS pages
+	 * Make sure nr_to_write is >= sbi->s_mb_stream_request
+	 * This make sure small files blocks are allocated in
+	 * single attempt. This ensure that small files
+	 * get less fragmented.
 	 */
-	needed_blocks = EXT4_MAX_WRITEBACK_CREDITS;
+	if (wbc->nr_to_write < sbi->s_mb_stream_request) {
+		nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write;
+		wbc->nr_to_write = sbi->s_mb_stream_request;
+	}
 
-	to_write = wbc->nr_to_write;
-	if (!wbc->range_cyclic) {
+	if (!wbc->range_cyclic)
 		/*
 		 * If range_cyclic is not set force range_cont
 		 * and save the old writeback_index
 		 */
 		wbc->range_cont = 1;
-		range_start =  wbc->range_start;
-	}
 
-	while (!ret && to_write) {
+	range_start =  wbc->range_start;
+	pages_skipped = wbc->pages_skipped;
+
+restart_loop:
+	to_write = wbc->nr_to_write;
+	while (!ret && to_write > 0) {
+
+		/*
+		 * we  insert one extent at a time. So we need
+		 * credit needed for single extent allocation.
+		 * journalled mode is currently not supported
+		 * by delalloc
+		 */
+		BUG_ON(ext4_should_journal_data(inode));
+		needed_blocks = ext4_da_writepages_trans_blocks(inode);
+
 		/* start a new transaction*/
 		handle = ext4_journal_start(inode, needed_blocks);
 		if (IS_ERR(handle)) {
 			ret = PTR_ERR(handle);
+			printk(KERN_EMERG "%s: jbd2_start: "
+			       "%ld pages, ino %lu; err %d\n", __func__,
+				wbc->nr_to_write, inode->i_ino, ret);
+			dump_stack();
 			goto out_writepages;
 		}
 		if (ext4_should_order_data(inode)) {
 			/*
 			 * With ordered mode we need to add
-			 * the inode to the journal handle
+			 * the inode to the journal handl
 			 * when we do block allocation.
 			 */
 			ret = ext4_jbd2_file_inode(handle, inode);
@@ -2219,20 +2351,20 @@ static int ext4_da_writepages(struct address_space *mapping,
 				ext4_journal_stop(handle);
 				goto out_writepages;
 			}
-
 		}
-		/*
-		 * set the max dirty pages could be write at a time
-		 * to fit into the reserved transaction credits
-		 */
-		if (wbc->nr_to_write > EXT4_MAX_WRITEBACK_PAGES)
-			wbc->nr_to_write = EXT4_MAX_WRITEBACK_PAGES;
 
 		to_write -= wbc->nr_to_write;
 		ret = mpage_da_writepages(mapping, wbc,
-						ext4_da_get_block_write);
+					  ext4_da_get_block_write);
 		ext4_journal_stop(handle);
-		if (wbc->nr_to_write) {
+		if (ret == MPAGE_DA_EXTENT_TAIL) {
+			/*
+			 * got one extent now try with
+			 * rest of the pages
+			 */
+			to_write += wbc->nr_to_write;
+			ret = 0;
+		} else if (wbc->nr_to_write) {
 			/*
 			 * There is no more writeout needed
 			 * or we requested for a noblocking writeout
@@ -2244,10 +2376,18 @@ static int ext4_da_writepages(struct address_space *mapping,
 		wbc->nr_to_write = to_write;
 	}
 
-out_writepages:
-	wbc->nr_to_write = to_write;
-	if (range_start)
+	if (wbc->range_cont && (pages_skipped != wbc->pages_skipped)) {
+		/* We skipped pages in this loop */
 		wbc->range_start = range_start;
+		wbc->nr_to_write = to_write +
+				wbc->pages_skipped - pages_skipped;
+		wbc->pages_skipped = pages_skipped;
+		goto restart_loop;
+	}
+
+out_writepages:
+	wbc->nr_to_write = to_write - nr_to_writebump;
+	wbc->range_start = range_start;
 	return ret;
 }
 
@@ -2280,8 +2420,11 @@ retry:
 	}
 
 	page = __grab_cache_page(mapping, index);
-	if (!page)
-		return -ENOMEM;
+	if (!page) {
+		ext4_journal_stop(handle);
+		ret = -ENOMEM;
+		goto out;
+	}
 	*pagep = page;
 
 	ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
@@ -3434,6 +3577,9 @@ void ext4_truncate(struct inode *inode)
 	 * modify the block allocation tree.
 	 */
 	down_write(&ei->i_data_sem);
+
+	ext4_discard_reservation(inode);
+
 	/*
 	 * The orphan list entry will now protect us from any crash which
 	 * occurs before the truncate completes, so it is now safe to propagate
@@ -3503,8 +3649,6 @@ do_indirects:
 		;
 	}
 
-	ext4_discard_reservation(inode);
-
 	up_write(&ei->i_data_sem);
 	inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
 	ext4_mark_inode_dirty(handle, inode);
@@ -3590,6 +3734,16 @@ static int __ext4_get_inode_loc(struct inode *inode,
 	}
 	if (!buffer_uptodate(bh)) {
 		lock_buffer(bh);
+
+		/*
+		 * If the buffer has the write error flag, we have failed
+		 * to write out another inode in the same block.  In this
+		 * case, we don't have to read the block because we may
+		 * read the old inode data successfully.
+		 */
+		if (buffer_write_io_error(bh) && !buffer_uptodate(bh))
+			set_buffer_uptodate(bh);
+
 		if (buffer_uptodate(bh)) {
 			/* someone brought it uptodate while we waited */
 			unlock_buffer(bh);
@@ -4262,57 +4416,129 @@ int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry,
 	return 0;
 }
 
+static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks,
+				      int chunk)
+{
+	int indirects;
+
+	/* if nrblocks are contiguous */
+	if (chunk) {
+		/*
+		 * With N contiguous data blocks, it need at most
+		 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) indirect blocks
+		 * 2 dindirect blocks
+		 * 1 tindirect block
+		 */
+		indirects = nrblocks / EXT4_ADDR_PER_BLOCK(inode->i_sb);
+		return indirects + 3;
+	}
+	/*
+	 * if nrblocks are not contiguous, worse case, each block touch
+	 * a indirect block, and each indirect block touch a double indirect
+	 * block, plus a triple indirect block
+	 */
+	indirects = nrblocks * 2 + 1;
+	return indirects;
+}
+
+static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+	if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+		return ext4_indirect_trans_blocks(inode, nrblocks, 0);
+	return ext4_ext_index_trans_blocks(inode, nrblocks, 0);
+}
 /*
- * How many blocks doth make a writepage()?
+ * Account for index blocks, block groups bitmaps and block group
+ * descriptor blocks if modify datablocks and index blocks
+ * worse case, the indexs blocks spread over different block groups
  *
- * With N blocks per page, it may be:
- * N data blocks
- * 2 indirect block
- * 2 dindirect
- * 1 tindirect
- * N+5 bitmap blocks (from the above)
- * N+5 group descriptor summary blocks
- * 1 inode block
- * 1 superblock.
- * 2 * EXT4_SINGLEDATA_TRANS_BLOCKS for the quote files
+ * If datablocks are discontiguous, they are possible to spread over
+ * different block groups too. If they are contiugous, with flexbg,
+ * they could still across block group boundary.
  *
- * 3 * (N + 5) + 2 + 2 * EXT4_SINGLEDATA_TRANS_BLOCKS
- *
- * With ordered or writeback data it's the same, less the N data blocks.
+ * Also account for superblock, inode, quota and xattr blocks
+ */
+int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+	int groups, gdpblocks;
+	int idxblocks;
+	int ret = 0;
+
+	/*
+	 * How many index blocks need to touch to modify nrblocks?
+	 * The "Chunk" flag indicating whether the nrblocks is
+	 * physically contiguous on disk
+	 *
+	 * For Direct IO and fallocate, they calls get_block to allocate
+	 * one single extent at a time, so they could set the "Chunk" flag
+	 */
+	idxblocks = ext4_index_trans_blocks(inode, nrblocks, chunk);
+
+	ret = idxblocks;
+
+	/*
+	 * Now let's see how many group bitmaps and group descriptors need
+	 * to account
+	 */
+	groups = idxblocks;
+	if (chunk)
+		groups += 1;
+	else
+		groups += nrblocks;
+
+	gdpblocks = groups;
+	if (groups > EXT4_SB(inode->i_sb)->s_groups_count)
+		groups = EXT4_SB(inode->i_sb)->s_groups_count;
+	if (groups > EXT4_SB(inode->i_sb)->s_gdb_count)
+		gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count;
+
+	/* bitmaps and block group descriptor blocks */
+	ret += groups + gdpblocks;
+
+	/* Blocks for super block, inode, quota and xattr blocks */
+	ret += EXT4_META_TRANS_BLOCKS(inode->i_sb);
+
+	return ret;
+}
+
+/*
+ * Calulate the total number of credits to reserve to fit
+ * the modification of a single pages into a single transaction,
+ * which may include multiple chunks of block allocations.
  *
- * If the inode's direct blocks can hold an integral number of pages then a
- * page cannot straddle two indirect blocks, and we can only touch one indirect
- * and dindirect block, and the "5" above becomes "3".
+ * This could be called via ext4_write_begin()
  *
- * This still overestimates under most circumstances.  If we were to pass the
- * start and end offsets in here as well we could do block_to_path() on each
- * block and work out the exact number of indirects which are touched.  Pah.
+ * We need to consider the worse case, when
+ * one new block per extent.
  */
-
 int ext4_writepage_trans_blocks(struct inode *inode)
 {
 	int bpp = ext4_journal_blocks_per_page(inode);
-	int indirects = (EXT4_NDIR_BLOCKS % bpp) ? 5 : 3;
 	int ret;
 
-	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
-		return ext4_ext_writepage_trans_blocks(inode, bpp);
+	ret = ext4_meta_trans_blocks(inode, bpp, 0);
 
+	/* Account for data blocks for journalled mode */
 	if (ext4_should_journal_data(inode))
-		ret = 3 * (bpp + indirects) + 2;
-	else
-		ret = 2 * (bpp + indirects) + 2;
-
-#ifdef CONFIG_QUOTA
-	/* We know that structure was already allocated during DQUOT_INIT so
-	 * we will be updating only the data blocks + inodes */
-	ret += 2*EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
-
+		ret += bpp;
 	return ret;
 }
 
 /*
+ * Calculate the journal credits for a chunk of data modification.
+ *
+ * This is called from DIO, fallocate or whoever calling
+ * ext4_get_blocks_wrap() to map/allocate a chunk of contigous disk blocks.
+ *
+ * journal buffers for data blocks are not included here, as DIO
+ * and fallocate do no need to journal data buffers.
+ */
+int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks)
+{
+	return ext4_meta_trans_blocks(inode, nrblocks, 1);
+}
+
+/*
  * The caller must have previously called ext4_reserve_inode_write().
  * Give this, we know that the caller already has write access to iloc->bh.
  */
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 8d141a25bbe..e0e3a5eb1dd 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -787,13 +787,16 @@ static int ext4_mb_init_cache(struct page *page, char *incore)
 		if (bh_uptodate_or_lock(bh[i]))
 			continue;
 
+		spin_lock(sb_bgl_lock(EXT4_SB(sb), first_group + i));
 		if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
 			ext4_init_block_bitmap(sb, bh[i],
 						first_group + i, desc);
 			set_buffer_uptodate(bh[i]);
 			unlock_buffer(bh[i]);
+			spin_unlock(sb_bgl_lock(EXT4_SB(sb), first_group + i));
 			continue;
 		}
+		spin_unlock(sb_bgl_lock(EXT4_SB(sb), first_group + i));
 		get_bh(bh[i]);
 		bh[i]->b_end_io = end_buffer_read_sync;
 		submit_bh(READ, bh[i]);
@@ -2477,7 +2480,7 @@ err_freesgi:
 int ext4_mb_init(struct super_block *sb, int needs_recovery)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	unsigned i;
+	unsigned i, j;
 	unsigned offset;
 	unsigned max;
 	int ret;
@@ -2537,7 +2540,7 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery)
 	sbi->s_mb_history_filter = EXT4_MB_HISTORY_DEFAULT;
 	sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC;
 
-	i = sizeof(struct ext4_locality_group) * NR_CPUS;
+	i = sizeof(struct ext4_locality_group) * nr_cpu_ids;
 	sbi->s_locality_groups = kmalloc(i, GFP_KERNEL);
 	if (sbi->s_locality_groups == NULL) {
 		clear_opt(sbi->s_mount_opt, MBALLOC);
@@ -2545,11 +2548,12 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery)
 		kfree(sbi->s_mb_maxs);
 		return -ENOMEM;
 	}
-	for (i = 0; i < NR_CPUS; i++) {
+	for (i = 0; i < nr_cpu_ids; i++) {
 		struct ext4_locality_group *lg;
 		lg = &sbi->s_locality_groups[i];
 		mutex_init(&lg->lg_mutex);
-		INIT_LIST_HEAD(&lg->lg_prealloc_list);
+		for (j = 0; j < PREALLOC_TB_SIZE; j++)
+			INIT_LIST_HEAD(&lg->lg_prealloc_list[j]);
 		spin_lock_init(&lg->lg_prealloc_lock);
 	}
 
@@ -3260,6 +3264,7 @@ static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac,
 				struct ext4_prealloc_space *pa)
 {
 	unsigned int len = ac->ac_o_ex.fe_len;
+
 	ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart,
 					&ac->ac_b_ex.fe_group,
 					&ac->ac_b_ex.fe_start);
@@ -3277,14 +3282,45 @@ static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac,
 }
 
 /*
+ * Return the prealloc space that have minimal distance
+ * from the goal block. @cpa is the prealloc
+ * space that is having currently known minimal distance
+ * from the goal block.
+ */
+static struct ext4_prealloc_space *
+ext4_mb_check_group_pa(ext4_fsblk_t goal_block,
+			struct ext4_prealloc_space *pa,
+			struct ext4_prealloc_space *cpa)
+{
+	ext4_fsblk_t cur_distance, new_distance;
+
+	if (cpa == NULL) {
+		atomic_inc(&pa->pa_count);
+		return pa;
+	}
+	cur_distance = abs(goal_block - cpa->pa_pstart);
+	new_distance = abs(goal_block - pa->pa_pstart);
+
+	if (cur_distance < new_distance)
+		return cpa;
+
+	/* drop the previous reference */
+	atomic_dec(&cpa->pa_count);
+	atomic_inc(&pa->pa_count);
+	return pa;
+}
+
+/*
  * search goal blocks in preallocated space
  */
 static noinline_for_stack int
 ext4_mb_use_preallocated(struct ext4_allocation_context *ac)
 {
+	int order, i;
 	struct ext4_inode_info *ei = EXT4_I(ac->ac_inode);
 	struct ext4_locality_group *lg;
-	struct ext4_prealloc_space *pa;
+	struct ext4_prealloc_space *pa, *cpa = NULL;
+	ext4_fsblk_t goal_block;
 
 	/* only data can be preallocated */
 	if (!(ac->ac_flags & EXT4_MB_HINT_DATA))
@@ -3322,22 +3358,38 @@ ext4_mb_use_preallocated(struct ext4_allocation_context *ac)
 	lg = ac->ac_lg;
 	if (lg == NULL)
 		return 0;
+	order  = fls(ac->ac_o_ex.fe_len) - 1;
+	if (order > PREALLOC_TB_SIZE - 1)
+		/* The max size of hash table is PREALLOC_TB_SIZE */
+		order = PREALLOC_TB_SIZE - 1;
+
+	goal_block = ac->ac_g_ex.fe_group * EXT4_BLOCKS_PER_GROUP(ac->ac_sb) +
+		     ac->ac_g_ex.fe_start +
+		     le32_to_cpu(EXT4_SB(ac->ac_sb)->s_es->s_first_data_block);
+	/*
+	 * search for the prealloc space that is having
+	 * minimal distance from the goal block.
+	 */
+	for (i = order; i < PREALLOC_TB_SIZE; i++) {
+		rcu_read_lock();
+		list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[i],
+					pa_inode_list) {
+			spin_lock(&pa->pa_lock);
+			if (pa->pa_deleted == 0 &&
+					pa->pa_free >= ac->ac_o_ex.fe_len) {
 
-	rcu_read_lock();
-	list_for_each_entry_rcu(pa, &lg->lg_prealloc_list, pa_inode_list) {
-		spin_lock(&pa->pa_lock);
-		if (pa->pa_deleted == 0 && pa->pa_free >= ac->ac_o_ex.fe_len) {
-			atomic_inc(&pa->pa_count);
-			ext4_mb_use_group_pa(ac, pa);
+				cpa = ext4_mb_check_group_pa(goal_block,
+								pa, cpa);
+			}
 			spin_unlock(&pa->pa_lock);
-			ac->ac_criteria = 20;
-			rcu_read_unlock();
-			return 1;
 		}
-		spin_unlock(&pa->pa_lock);
+		rcu_read_unlock();
+	}
+	if (cpa) {
+		ext4_mb_use_group_pa(ac, cpa);
+		ac->ac_criteria = 20;
+		return 1;
 	}
-	rcu_read_unlock();
-
 	return 0;
 }
 
@@ -3560,6 +3612,7 @@ ext4_mb_new_group_pa(struct ext4_allocation_context *ac)
 	pa->pa_free = pa->pa_len;
 	atomic_set(&pa->pa_count, 1);
 	spin_lock_init(&pa->pa_lock);
+	INIT_LIST_HEAD(&pa->pa_inode_list);
 	pa->pa_deleted = 0;
 	pa->pa_linear = 1;
 
@@ -3580,10 +3633,10 @@ ext4_mb_new_group_pa(struct ext4_allocation_context *ac)
 	list_add(&pa->pa_group_list, &grp->bb_prealloc_list);
 	ext4_unlock_group(sb, ac->ac_b_ex.fe_group);
 
-	spin_lock(pa->pa_obj_lock);
-	list_add_tail_rcu(&pa->pa_inode_list, &lg->lg_prealloc_list);
-	spin_unlock(pa->pa_obj_lock);
-
+	/*
+	 * We will later add the new pa to the right bucket
+	 * after updating the pa_free in ext4_mb_release_context
+	 */
 	return 0;
 }
 
@@ -3733,20 +3786,23 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 
 	bitmap_bh = ext4_read_block_bitmap(sb, group);
 	if (bitmap_bh == NULL) {
-		/* error handling here */
-		ext4_mb_release_desc(&e4b);
-		BUG_ON(bitmap_bh == NULL);
+		ext4_error(sb, __func__, "Error in reading block "
+				"bitmap for %lu\n", group);
+		return 0;
 	}
 
 	err = ext4_mb_load_buddy(sb, group, &e4b);
-	BUG_ON(err != 0); /* error handling here */
+	if (err) {
+		ext4_error(sb, __func__, "Error in loading buddy "
+				"information for %lu\n", group);
+		put_bh(bitmap_bh);
+		return 0;
+	}
 
 	if (needed == 0)
 		needed = EXT4_BLOCKS_PER_GROUP(sb) + 1;
 
-	grp = ext4_get_group_info(sb, group);
 	INIT_LIST_HEAD(&list);
-
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
 repeat:
 	ext4_lock_group(sb, group);
@@ -3903,13 +3959,18 @@ repeat:
 		ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, NULL);
 
 		err = ext4_mb_load_buddy(sb, group, &e4b);
-		BUG_ON(err != 0); /* error handling here */
+		if (err) {
+			ext4_error(sb, __func__, "Error in loading buddy "
+					"information for %lu\n", group);
+			continue;
+		}
 
 		bitmap_bh = ext4_read_block_bitmap(sb, group);
 		if (bitmap_bh == NULL) {
-			/* error handling here */
+			ext4_error(sb, __func__, "Error in reading block "
+					"bitmap for %lu\n", group);
 			ext4_mb_release_desc(&e4b);
-			BUG_ON(bitmap_bh == NULL);
+			continue;
 		}
 
 		ext4_lock_group(sb, group);
@@ -4112,22 +4173,168 @@ ext4_mb_initialize_context(struct ext4_allocation_context *ac,
 
 }
 
+static noinline_for_stack void
+ext4_mb_discard_lg_preallocations(struct super_block *sb,
+					struct ext4_locality_group *lg,
+					int order, int total_entries)
+{
+	ext4_group_t group = 0;
+	struct ext4_buddy e4b;
+	struct list_head discard_list;
+	struct ext4_prealloc_space *pa, *tmp;
+	struct ext4_allocation_context *ac;
+
+	mb_debug("discard locality group preallocation\n");
+
+	INIT_LIST_HEAD(&discard_list);
+	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
+
+	spin_lock(&lg->lg_prealloc_lock);
+	list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[order],
+						pa_inode_list) {
+		spin_lock(&pa->pa_lock);
+		if (atomic_read(&pa->pa_count)) {
+			/*
+			 * This is the pa that we just used
+			 * for block allocation. So don't
+			 * free that
+			 */
+			spin_unlock(&pa->pa_lock);
+			continue;
+		}
+		if (pa->pa_deleted) {
+			spin_unlock(&pa->pa_lock);
+			continue;
+		}
+		/* only lg prealloc space */
+		BUG_ON(!pa->pa_linear);
+
+		/* seems this one can be freed ... */
+		pa->pa_deleted = 1;
+		spin_unlock(&pa->pa_lock);
+
+		list_del_rcu(&pa->pa_inode_list);
+		list_add(&pa->u.pa_tmp_list, &discard_list);
+
+		total_entries--;
+		if (total_entries <= 5) {
+			/*
+			 * we want to keep only 5 entries
+			 * allowing it to grow to 8. This
+			 * mak sure we don't call discard
+			 * soon for this list.
+			 */
+			break;
+		}
+	}
+	spin_unlock(&lg->lg_prealloc_lock);
+
+	list_for_each_entry_safe(pa, tmp, &discard_list, u.pa_tmp_list) {
+
+		ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, NULL);
+		if (ext4_mb_load_buddy(sb, group, &e4b)) {
+			ext4_error(sb, __func__, "Error in loading buddy "
+					"information for %lu\n", group);
+			continue;
+		}
+		ext4_lock_group(sb, group);
+		list_del(&pa->pa_group_list);
+		ext4_mb_release_group_pa(&e4b, pa, ac);
+		ext4_unlock_group(sb, group);
+
+		ext4_mb_release_desc(&e4b);
+		list_del(&pa->u.pa_tmp_list);
+		call_rcu(&(pa)->u.pa_rcu, ext4_mb_pa_callback);
+	}
+	if (ac)
+		kmem_cache_free(ext4_ac_cachep, ac);
+}
+
+/*
+ * We have incremented pa_count. So it cannot be freed at this
+ * point. Also we hold lg_mutex. So no parallel allocation is
+ * possible from this lg. That means pa_free cannot be updated.
+ *
+ * A parallel ext4_mb_discard_group_preallocations is possible.
+ * which can cause the lg_prealloc_list to be updated.
+ */
+
+static void ext4_mb_add_n_trim(struct ext4_allocation_context *ac)
+{
+	int order, added = 0, lg_prealloc_count = 1;
+	struct super_block *sb = ac->ac_sb;
+	struct ext4_locality_group *lg = ac->ac_lg;
+	struct ext4_prealloc_space *tmp_pa, *pa = ac->ac_pa;
+
+	order = fls(pa->pa_free) - 1;
+	if (order > PREALLOC_TB_SIZE - 1)
+		/* The max size of hash table is PREALLOC_TB_SIZE */
+		order = PREALLOC_TB_SIZE - 1;
+	/* Add the prealloc space to lg */
+	rcu_read_lock();
+	list_for_each_entry_rcu(tmp_pa, &lg->lg_prealloc_list[order],
+						pa_inode_list) {
+		spin_lock(&tmp_pa->pa_lock);
+		if (tmp_pa->pa_deleted) {
+			spin_unlock(&pa->pa_lock);
+			continue;
+		}
+		if (!added && pa->pa_free < tmp_pa->pa_free) {
+			/* Add to the tail of the previous entry */
+			list_add_tail_rcu(&pa->pa_inode_list,
+						&tmp_pa->pa_inode_list);
+			added = 1;
+			/*
+			 * we want to count the total
+			 * number of entries in the list
+			 */
+		}
+		spin_unlock(&tmp_pa->pa_lock);
+		lg_prealloc_count++;
+	}
+	if (!added)
+		list_add_tail_rcu(&pa->pa_inode_list,
+					&lg->lg_prealloc_list[order]);
+	rcu_read_unlock();
+
+	/* Now trim the list to be not more than 8 elements */
+	if (lg_prealloc_count > 8) {
+		ext4_mb_discard_lg_preallocations(sb, lg,
+						order, lg_prealloc_count);
+		return;
+	}
+	return ;
+}
+
 /*
  * release all resource we used in allocation
  */
 static int ext4_mb_release_context(struct ext4_allocation_context *ac)
 {
-	if (ac->ac_pa) {
-		if (ac->ac_pa->pa_linear) {
+	struct ext4_prealloc_space *pa = ac->ac_pa;
+	if (pa) {
+		if (pa->pa_linear) {
 			/* see comment in ext4_mb_use_group_pa() */
-			spin_lock(&ac->ac_pa->pa_lock);
-			ac->ac_pa->pa_pstart += ac->ac_b_ex.fe_len;
-			ac->ac_pa->pa_lstart += ac->ac_b_ex.fe_len;
-			ac->ac_pa->pa_free -= ac->ac_b_ex.fe_len;
-			ac->ac_pa->pa_len -= ac->ac_b_ex.fe_len;
-			spin_unlock(&ac->ac_pa->pa_lock);
+			spin_lock(&pa->pa_lock);
+			pa->pa_pstart += ac->ac_b_ex.fe_len;
+			pa->pa_lstart += ac->ac_b_ex.fe_len;
+			pa->pa_free -= ac->ac_b_ex.fe_len;
+			pa->pa_len -= ac->ac_b_ex.fe_len;
+			spin_unlock(&pa->pa_lock);
+			/*
+			 * We want to add the pa to the right bucket.
+			 * Remove it from the list and while adding
+			 * make sure the list to which we are adding
+			 * doesn't grow big.
+			 */
+			if (likely(pa->pa_free)) {
+				spin_lock(pa->pa_obj_lock);
+				list_del_rcu(&pa->pa_inode_list);
+				spin_unlock(pa->pa_obj_lock);
+				ext4_mb_add_n_trim(ac);
+			}
 		}
-		ext4_mb_put_pa(ac, ac->ac_sb, ac->ac_pa);
+		ext4_mb_put_pa(ac, ac->ac_sb, pa);
 	}
 	if (ac->ac_bitmap_page)
 		page_cache_release(ac->ac_bitmap_page);
@@ -4420,11 +4627,15 @@ do_more:
 		count -= overflow;
 	}
 	bitmap_bh = ext4_read_block_bitmap(sb, block_group);
-	if (!bitmap_bh)
+	if (!bitmap_bh) {
+		err = -EIO;
 		goto error_return;
+	}
 	gdp = ext4_get_group_desc(sb, block_group, &gd_bh);
-	if (!gdp)
+	if (!gdp) {
+		err = -EIO;
 		goto error_return;
+	}
 
 	if (in_range(ext4_block_bitmap(sb, gdp), block, count) ||
 	    in_range(ext4_inode_bitmap(sb, gdp), block, count) ||
diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
index bfe6add46bc..c7c9906c2a7 100644
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -164,11 +164,17 @@ struct ext4_free_extent {
  * Locality group:
  *   we try to group all related changes together
  *   so that writeback can flush/allocate them together as well
+ *   Size of lg_prealloc_list hash is determined by MB_DEFAULT_GROUP_PREALLOC
+ *   (512). We store prealloc space into the hash based on the pa_free blocks
+ *   order value.ie, fls(pa_free)-1;
  */
+#define PREALLOC_TB_SIZE 10
 struct ext4_locality_group {
 	/* for allocator */
-	struct mutex		lg_mutex;	/* to serialize allocates */
-	struct list_head	lg_prealloc_list;/* list of preallocations */
+	/* to serialize allocates */
+	struct mutex		lg_mutex;
+	/* list of preallocations */
+	struct list_head	lg_prealloc_list[PREALLOC_TB_SIZE];
 	spinlock_t		lg_prealloc_lock;
 };
 
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index b9e077ba07e..46fc0b5b12b 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -53,7 +53,8 @@ static int finish_range(handle_t *handle, struct inode *inode,
 	 * credit. But below we try to not accumalate too much
 	 * of them by restarting the journal.
 	 */
-	needed = ext4_ext_calc_credits_for_insert(inode, path);
+	needed = ext4_ext_calc_credits_for_single_extent(inode,
+		    lb->last_block - lb->first_block + 1, path);
 
 	/*
 	 * Make sure the credit we accumalated is not really high
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index f000fbe2cd9..b3d35604ea1 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -73,7 +73,7 @@ static int verify_group_input(struct super_block *sb,
 			     "Inode bitmap not in group (block %llu)",
 			     (unsigned long long)input->inode_bitmap);
 	else if (outside(input->inode_table, start, end) ||
-	         outside(itend - 1, start, end))
+		 outside(itend - 1, start, end))
 		ext4_warning(sb, __func__,
 			     "Inode table not in group (blocks %llu-%llu)",
 			     (unsigned long long)input->inode_table, itend - 1);
@@ -104,7 +104,7 @@ static int verify_group_input(struct super_block *sb,
 			     (unsigned long long)input->inode_bitmap,
 			     start, metaend - 1);
 	else if (inside(input->inode_table, start, metaend) ||
-	         inside(itend - 1, start, metaend))
+		 inside(itend - 1, start, metaend))
 		ext4_warning(sb, __func__,
 			     "Inode table (%llu-%llu) overlaps"
 			     "GDT table (%llu-%llu)",
@@ -158,9 +158,9 @@ static int extend_or_restart_transaction(handle_t *handle, int thresh,
 	if (err) {
 		if ((err = ext4_journal_restart(handle, EXT4_MAX_TRANS_DATA)))
 			return err;
-	        if ((err = ext4_journal_get_write_access(handle, bh)))
+		if ((err = ext4_journal_get_write_access(handle, bh)))
 			return err;
-        }
+	}
 
 	return 0;
 }
@@ -416,11 +416,11 @@ static int add_new_gdb(handle_t *handle, struct inode *inode,
 		       "EXT4-fs: ext4_add_new_gdb: adding group block %lu\n",
 		       gdb_num);
 
-	/*
-	 * If we are not using the primary superblock/GDT copy don't resize,
-	 * because the user tools have no way of handling this.  Probably a
-	 * bad time to do it anyways.
-	 */
+        /*
+         * If we are not using the primary superblock/GDT copy don't resize,
+         * because the user tools have no way of handling this.  Probably a
+         * bad time to do it anyways.
+         */
 	if (EXT4_SB(sb)->s_sbh->b_blocknr !=
 	    le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) {
 		ext4_warning(sb, __func__,
@@ -507,14 +507,14 @@ static int add_new_gdb(handle_t *handle, struct inode *inode,
 	return 0;
 
 exit_inode:
-	//ext4_journal_release_buffer(handle, iloc.bh);
+	/* ext4_journal_release_buffer(handle, iloc.bh); */
 	brelse(iloc.bh);
 exit_dindj:
-	//ext4_journal_release_buffer(handle, dind);
+	/* ext4_journal_release_buffer(handle, dind); */
 exit_primary:
-	//ext4_journal_release_buffer(handle, *primary);
+	/* ext4_journal_release_buffer(handle, *primary); */
 exit_sbh:
-	//ext4_journal_release_buffer(handle, *primary);
+	/* ext4_journal_release_buffer(handle, *primary); */
 exit_dind:
 	brelse(dind);
 exit_bh:
@@ -773,7 +773,8 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 
 	if (reserved_gdb || gdb_off == 0) {
 		if (!EXT4_HAS_COMPAT_FEATURE(sb,
-					     EXT4_FEATURE_COMPAT_RESIZE_INODE)){
+					     EXT4_FEATURE_COMPAT_RESIZE_INODE)
+		    || !le16_to_cpu(es->s_reserved_gdt_blocks)) {
 			ext4_warning(sb, __func__,
 				     "No reserved GDT blocks, can't resize");
 			return -EPERM;
@@ -818,12 +819,12 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 	if ((err = ext4_journal_get_write_access(handle, sbi->s_sbh)))
 		goto exit_journal;
 
-	/*
-	 * We will only either add reserved group blocks to a backup group
-	 * or remove reserved blocks for the first group in a new group block.
-	 * Doing both would be mean more complex code, and sane people don't
-	 * use non-sparse filesystems anymore.  This is already checked above.
-	 */
+        /*
+         * We will only either add reserved group blocks to a backup group
+         * or remove reserved blocks for the first group in a new group block.
+         * Doing both would be mean more complex code, and sane people don't
+         * use non-sparse filesystems anymore.  This is already checked above.
+         */
 	if (gdb_off) {
 		primary = sbi->s_group_desc[gdb_num];
 		if ((err = ext4_journal_get_write_access(handle, primary)))
@@ -835,24 +836,24 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 	} else if ((err = add_new_gdb(handle, inode, input, &primary)))
 		goto exit_journal;
 
-	/*
-	 * OK, now we've set up the new group.  Time to make it active.
-	 *
-	 * Current kernels don't lock all allocations via lock_super(),
-	 * so we have to be safe wrt. concurrent accesses the group
-	 * data.  So we need to be careful to set all of the relevant
-	 * group descriptor data etc. *before* we enable the group.
-	 *
-	 * The key field here is sbi->s_groups_count: as long as
-	 * that retains its old value, nobody is going to access the new
-	 * group.
-	 *
-	 * So first we update all the descriptor metadata for the new
-	 * group; then we update the total disk blocks count; then we
-	 * update the groups count to enable the group; then finally we
-	 * update the free space counts so that the system can start
-	 * using the new disk blocks.
-	 */
+        /*
+         * OK, now we've set up the new group.  Time to make it active.
+         *
+         * Current kernels don't lock all allocations via lock_super(),
+         * so we have to be safe wrt. concurrent accesses the group
+         * data.  So we need to be careful to set all of the relevant
+         * group descriptor data etc. *before* we enable the group.
+         *
+         * The key field here is sbi->s_groups_count: as long as
+         * that retains its old value, nobody is going to access the new
+         * group.
+         *
+         * So first we update all the descriptor metadata for the new
+         * group; then we update the total disk blocks count; then we
+         * update the groups count to enable the group; then finally we
+         * update the free space counts so that the system can start
+         * using the new disk blocks.
+         */
 
 	/* Update group descriptor block for new group */
 	gdp = (struct ext4_group_desc *)((char *)primary->b_data +
@@ -946,7 +947,8 @@ exit_put:
 	return err;
 } /* ext4_group_add */
 
-/* Extend the filesystem to the new number of blocks specified.  This entry
+/*
+ * Extend the filesystem to the new number of blocks specified.  This entry
  * point is only used to extend the current filesystem to the end of the last
  * existing group.  It can be accessed via ioctl, or by "remount,resize=<size>"
  * for emergencies (because it has no dependencies on reserved blocks).
@@ -1024,7 +1026,7 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es,
 			     o_blocks_count + add, add);
 
 	/* See if the device is actually as big as what was requested */
-	bh = sb_bread(sb, o_blocks_count + add -1);
+	bh = sb_bread(sb, o_blocks_count + add - 1);
 	if (!bh) {
 		ext4_warning(sb, __func__,
 			     "can't read last block, resize aborted");
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index b5479b1dff1..566344b926b 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -49,20 +49,19 @@ static int ext4_load_journal(struct super_block *, struct ext4_super_block *,
 			     unsigned long journal_devnum);
 static int ext4_create_journal(struct super_block *, struct ext4_super_block *,
 			       unsigned int);
-static void ext4_commit_super (struct super_block * sb,
-			       struct ext4_super_block * es,
-			       int sync);
-static void ext4_mark_recovery_complete(struct super_block * sb,
-					struct ext4_super_block * es);
-static void ext4_clear_journal_err(struct super_block * sb,
-				   struct ext4_super_block * es);
+static void ext4_commit_super(struct super_block *sb,
+			      struct ext4_super_block *es, int sync);
+static void ext4_mark_recovery_complete(struct super_block *sb,
+					struct ext4_super_block *es);
+static void ext4_clear_journal_err(struct super_block *sb,
+				   struct ext4_super_block *es);
 static int ext4_sync_fs(struct super_block *sb, int wait);
-static const char *ext4_decode_error(struct super_block * sb, int errno,
+static const char *ext4_decode_error(struct super_block *sb, int errno,
 				     char nbuf[16]);
-static int ext4_remount (struct super_block * sb, int * flags, char * data);
-static int ext4_statfs (struct dentry * dentry, struct kstatfs * buf);
+static int ext4_remount(struct super_block *sb, int *flags, char *data);
+static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf);
 static void ext4_unlockfs(struct super_block *sb);
-static void ext4_write_super (struct super_block * sb);
+static void ext4_write_super(struct super_block *sb);
 static void ext4_write_super_lockfs(struct super_block *sb);
 
 
@@ -211,15 +210,15 @@ static void ext4_handle_error(struct super_block *sb)
 	if (sb->s_flags & MS_RDONLY)
 		return;
 
-	if (!test_opt (sb, ERRORS_CONT)) {
+	if (!test_opt(sb, ERRORS_CONT)) {
 		journal_t *journal = EXT4_SB(sb)->s_journal;
 
 		EXT4_SB(sb)->s_mount_opt |= EXT4_MOUNT_ABORT;
 		if (journal)
 			jbd2_journal_abort(journal, -EIO);
 	}
-	if (test_opt (sb, ERRORS_RO)) {
-		printk (KERN_CRIT "Remounting filesystem read-only\n");
+	if (test_opt(sb, ERRORS_RO)) {
+		printk(KERN_CRIT "Remounting filesystem read-only\n");
 		sb->s_flags |= MS_RDONLY;
 	}
 	ext4_commit_super(sb, es, 1);
@@ -228,13 +227,13 @@ static void ext4_handle_error(struct super_block *sb)
 			sb->s_id);
 }
 
-void ext4_error (struct super_block * sb, const char * function,
-		 const char * fmt, ...)
+void ext4_error(struct super_block *sb, const char *function,
+		const char *fmt, ...)
 {
 	va_list args;
 
 	va_start(args, fmt);
-	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ",sb->s_id, function);
+	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
 	vprintk(fmt, args);
 	printk("\n");
 	va_end(args);
@@ -242,7 +241,7 @@ void ext4_error (struct super_block * sb, const char * function,
 	ext4_handle_error(sb);
 }
 
-static const char *ext4_decode_error(struct super_block * sb, int errno,
+static const char *ext4_decode_error(struct super_block *sb, int errno,
 				     char nbuf[16])
 {
 	char *errstr = NULL;
@@ -278,8 +277,7 @@ static const char *ext4_decode_error(struct super_block * sb, int errno,
 /* __ext4_std_error decodes expected errors from journaling functions
  * automatically and invokes the appropriate error response.  */
 
-void __ext4_std_error (struct super_block * sb, const char * function,
-		       int errno)
+void __ext4_std_error(struct super_block *sb, const char *function, int errno)
 {
 	char nbuf[16];
 	const char *errstr;
@@ -292,8 +290,8 @@ void __ext4_std_error (struct super_block * sb, const char * function,
 		return;
 
 	errstr = ext4_decode_error(sb, errno, nbuf);
-	printk (KERN_CRIT "EXT4-fs error (device %s) in %s: %s\n",
-		sb->s_id, function, errstr);
+	printk(KERN_CRIT "EXT4-fs error (device %s) in %s: %s\n",
+	       sb->s_id, function, errstr);
 
 	ext4_handle_error(sb);
 }
@@ -308,15 +306,15 @@ void __ext4_std_error (struct super_block * sb, const char * function,
  * case we take the easy way out and panic immediately.
  */
 
-void ext4_abort (struct super_block * sb, const char * function,
-		 const char * fmt, ...)
+void ext4_abort(struct super_block *sb, const char *function,
+		const char *fmt, ...)
 {
 	va_list args;
 
-	printk (KERN_CRIT "ext4_abort called.\n");
+	printk(KERN_CRIT "ext4_abort called.\n");
 
 	va_start(args, fmt);
-	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ",sb->s_id, function);
+	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
 	vprintk(fmt, args);
 	printk("\n");
 	va_end(args);
@@ -334,8 +332,8 @@ void ext4_abort (struct super_block * sb, const char * function,
 	jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
 }
 
-void ext4_warning (struct super_block * sb, const char * function,
-		   const char * fmt, ...)
+void ext4_warning(struct super_block *sb, const char *function,
+		  const char *fmt, ...)
 {
 	va_list args;
 
@@ -496,7 +494,7 @@ static void dump_orphan_list(struct super_block *sb, struct ext4_sb_info *sbi)
 	}
 }
 
-static void ext4_put_super (struct super_block * sb)
+static void ext4_put_super(struct super_block *sb)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	struct ext4_super_block *es = sbi->s_es;
@@ -570,6 +568,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 #endif
 	ei->i_block_alloc_info = NULL;
 	ei->vfs_inode.i_version = 1;
+	ei->vfs_inode.i_data.writeback_index = 0;
 	memset(&ei->i_cached_extent, 0, sizeof(struct ext4_ext_cache));
 	INIT_LIST_HEAD(&ei->i_prealloc_list);
 	spin_lock_init(&ei->i_prealloc_lock);
@@ -647,7 +646,8 @@ static void ext4_clear_inode(struct inode *inode)
 				       &EXT4_I(inode)->jinode);
 }
 
-static inline void ext4_show_quota_options(struct seq_file *seq, struct super_block *sb)
+static inline void ext4_show_quota_options(struct seq_file *seq,
+					   struct super_block *sb)
 {
 #if defined(CONFIG_QUOTA)
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
@@ -822,8 +822,8 @@ static struct dentry *ext4_fh_to_parent(struct super_block *sb, struct fid *fid,
 }
 
 #ifdef CONFIG_QUOTA
-#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group")
-#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))
+#define QTYPE2NAME(t) ((t) == USRQUOTA?"user":"group")
+#define QTYPE2MOPT(on, t) ((t) == USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))
 
 static int ext4_dquot_initialize(struct inode *inode, int type);
 static int ext4_dquot_drop(struct inode *inode);
@@ -991,12 +991,12 @@ static ext4_fsblk_t get_sb_block(void **data)
 	return sb_block;
 }
 
-static int parse_options (char *options, struct super_block *sb,
-			  unsigned int *inum, unsigned long *journal_devnum,
-			  ext4_fsblk_t *n_blocks_count, int is_remount)
+static int parse_options(char *options, struct super_block *sb,
+			 unsigned int *inum, unsigned long *journal_devnum,
+			 ext4_fsblk_t *n_blocks_count, int is_remount)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	char * p;
+	char *p;
 	substring_t args[MAX_OPT_ARGS];
 	int data_opt = 0;
 	int option;
@@ -1009,7 +1009,7 @@ static int parse_options (char *options, struct super_block *sb,
 	if (!options)
 		return 1;
 
-	while ((p = strsep (&options, ",")) != NULL) {
+	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
 		if (!*p)
 			continue;
@@ -1017,16 +1017,16 @@ static int parse_options (char *options, struct super_block *sb,
 		token = match_token(p, tokens, args);
 		switch (token) {
 		case Opt_bsd_df:
-			clear_opt (sbi->s_mount_opt, MINIX_DF);
+			clear_opt(sbi->s_mount_opt, MINIX_DF);
 			break;
 		case Opt_minix_df:
-			set_opt (sbi->s_mount_opt, MINIX_DF);
+			set_opt(sbi->s_mount_opt, MINIX_DF);
 			break;
 		case Opt_grpid:
-			set_opt (sbi->s_mount_opt, GRPID);
+			set_opt(sbi->s_mount_opt, GRPID);
 			break;
 		case Opt_nogrpid:
-			clear_opt (sbi->s_mount_opt, GRPID);
+			clear_opt(sbi->s_mount_opt, GRPID);
 			break;
 		case Opt_resuid:
 			if (match_int(&args[0], &option))
@@ -1043,41 +1043,41 @@ static int parse_options (char *options, struct super_block *sb,
 			/* *sb_block = match_int(&args[0]); */
 			break;
 		case Opt_err_panic:
-			clear_opt (sbi->s_mount_opt, ERRORS_CONT);
-			clear_opt (sbi->s_mount_opt, ERRORS_RO);
-			set_opt (sbi->s_mount_opt, ERRORS_PANIC);
+			clear_opt(sbi->s_mount_opt, ERRORS_CONT);
+			clear_opt(sbi->s_mount_opt, ERRORS_RO);
+			set_opt(sbi->s_mount_opt, ERRORS_PANIC);
 			break;
 		case Opt_err_ro:
-			clear_opt (sbi->s_mount_opt, ERRORS_CONT);
-			clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
-			set_opt (sbi->s_mount_opt, ERRORS_RO);
+			clear_opt(sbi->s_mount_opt, ERRORS_CONT);
+			clear_opt(sbi->s_mount_opt, ERRORS_PANIC);
+			set_opt(sbi->s_mount_opt, ERRORS_RO);
 			break;
 		case Opt_err_cont:
-			clear_opt (sbi->s_mount_opt, ERRORS_RO);
-			clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
-			set_opt (sbi->s_mount_opt, ERRORS_CONT);
+			clear_opt(sbi->s_mount_opt, ERRORS_RO);
+			clear_opt(sbi->s_mount_opt, ERRORS_PANIC);
+			set_opt(sbi->s_mount_opt, ERRORS_CONT);
 			break;
 		case Opt_nouid32:
-			set_opt (sbi->s_mount_opt, NO_UID32);
+			set_opt(sbi->s_mount_opt, NO_UID32);
 			break;
 		case Opt_nocheck:
-			clear_opt (sbi->s_mount_opt, CHECK);
+			clear_opt(sbi->s_mount_opt, CHECK);
 			break;
 		case Opt_debug:
-			set_opt (sbi->s_mount_opt, DEBUG);
+			set_opt(sbi->s_mount_opt, DEBUG);
 			break;
 		case Opt_oldalloc:
-			set_opt (sbi->s_mount_opt, OLDALLOC);
+			set_opt(sbi->s_mount_opt, OLDALLOC);
 			break;
 		case Opt_orlov:
-			clear_opt (sbi->s_mount_opt, OLDALLOC);
+			clear_opt(sbi->s_mount_opt, OLDALLOC);
 			break;
 #ifdef CONFIG_EXT4DEV_FS_XATTR
 		case Opt_user_xattr:
-			set_opt (sbi->s_mount_opt, XATTR_USER);
+			set_opt(sbi->s_mount_opt, XATTR_USER);
 			break;
 		case Opt_nouser_xattr:
-			clear_opt (sbi->s_mount_opt, XATTR_USER);
+			clear_opt(sbi->s_mount_opt, XATTR_USER);
 			break;
 #else
 		case Opt_user_xattr:
@@ -1115,7 +1115,7 @@ static int parse_options (char *options, struct super_block *sb,
 				       "journal on remount\n");
 				return 0;
 			}
-			set_opt (sbi->s_mount_opt, UPDATE_JOURNAL);
+			set_opt(sbi->s_mount_opt, UPDATE_JOURNAL);
 			break;
 		case Opt_journal_inum:
 			if (is_remount) {
@@ -1145,7 +1145,7 @@ static int parse_options (char *options, struct super_block *sb,
 			set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM);
 			break;
 		case Opt_noload:
-			set_opt (sbi->s_mount_opt, NOLOAD);
+			set_opt(sbi->s_mount_opt, NOLOAD);
 			break;
 		case Opt_commit:
 			if (match_int(&args[0], &option))
@@ -1331,7 +1331,7 @@ set_qf_format:
 					"on this filesystem, use tune2fs\n");
 				return 0;
 			}
-			set_opt (sbi->s_mount_opt, EXTENTS);
+			set_opt(sbi->s_mount_opt, EXTENTS);
 			break;
 		case Opt_noextents:
 			/*
@@ -1348,7 +1348,7 @@ set_qf_format:
 						"-o noextents options\n");
 				return 0;
 			}
-			clear_opt (sbi->s_mount_opt, EXTENTS);
+			clear_opt(sbi->s_mount_opt, EXTENTS);
 			break;
 		case Opt_i_version:
 			set_opt(sbi->s_mount_opt, I_VERSION);
@@ -1374,9 +1374,9 @@ set_qf_format:
 			set_opt(sbi->s_mount_opt, DELALLOC);
 			break;
 		default:
-			printk (KERN_ERR
-				"EXT4-fs: Unrecognized mount option \"%s\" "
-				"or missing value\n", p);
+			printk(KERN_ERR
+			       "EXT4-fs: Unrecognized mount option \"%s\" "
+			       "or missing value\n", p);
 			return 0;
 		}
 	}
@@ -1423,31 +1423,31 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
 	int res = 0;
 
 	if (le32_to_cpu(es->s_rev_level) > EXT4_MAX_SUPP_REV) {
-		printk (KERN_ERR "EXT4-fs warning: revision level too high, "
-			"forcing read-only mode\n");
+		printk(KERN_ERR "EXT4-fs warning: revision level too high, "
+		       "forcing read-only mode\n");
 		res = MS_RDONLY;
 	}
 	if (read_only)
 		return res;
 	if (!(sbi->s_mount_state & EXT4_VALID_FS))
-		printk (KERN_WARNING "EXT4-fs warning: mounting unchecked fs, "
-			"running e2fsck is recommended\n");
+		printk(KERN_WARNING "EXT4-fs warning: mounting unchecked fs, "
+		       "running e2fsck is recommended\n");
 	else if ((sbi->s_mount_state & EXT4_ERROR_FS))
-		printk (KERN_WARNING
-			"EXT4-fs warning: mounting fs with errors, "
-			"running e2fsck is recommended\n");
+		printk(KERN_WARNING
+		       "EXT4-fs warning: mounting fs with errors, "
+		       "running e2fsck is recommended\n");
 	else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
 		 le16_to_cpu(es->s_mnt_count) >=
 		 (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
-		printk (KERN_WARNING
-			"EXT4-fs warning: maximal mount count reached, "
-			"running e2fsck is recommended\n");
+		printk(KERN_WARNING
+		       "EXT4-fs warning: maximal mount count reached, "
+		       "running e2fsck is recommended\n");
 	else if (le32_to_cpu(es->s_checkinterval) &&
 		(le32_to_cpu(es->s_lastcheck) +
 			le32_to_cpu(es->s_checkinterval) <= get_seconds()))
-		printk (KERN_WARNING
-			"EXT4-fs warning: checktime reached, "
-			"running e2fsck is recommended\n");
+		printk(KERN_WARNING
+		       "EXT4-fs warning: checktime reached, "
+		       "running e2fsck is recommended\n");
 #if 0
 		/* @@@ We _will_ want to clear the valid bit if we find
 		 * inconsistencies, to force a fsck at reboot.  But for
@@ -1506,14 +1506,13 @@ static int ext4_fill_flex_info(struct super_block *sb)
 
 	flex_group_count = (sbi->s_groups_count + groups_per_flex - 1) /
 		groups_per_flex;
-	sbi->s_flex_groups = kmalloc(flex_group_count *
+	sbi->s_flex_groups = kzalloc(flex_group_count *
 				     sizeof(struct flex_groups), GFP_KERNEL);
 	if (sbi->s_flex_groups == NULL) {
-		printk(KERN_ERR "EXT4-fs: not enough memory\n");
+		printk(KERN_ERR "EXT4-fs: not enough memory for "
+				"%lu flex groups\n", flex_group_count);
 		goto failed;
 	}
-	memset(sbi->s_flex_groups, 0, flex_group_count *
-	       sizeof(struct flex_groups));
 
 	gdp = ext4_get_group_desc(sb, 1, &bh);
 	block_bitmap = ext4_block_bitmap(sb, gdp) - 1;
@@ -1597,16 +1596,14 @@ static int ext4_check_descriptors(struct super_block *sb)
 				(EXT4_BLOCKS_PER_GROUP(sb) - 1);
 
 		block_bitmap = ext4_block_bitmap(sb, gdp);
-		if (block_bitmap < first_block || block_bitmap > last_block)
-		{
+		if (block_bitmap < first_block || block_bitmap > last_block) {
 			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
 			       "Block bitmap for group %lu not in group "
 			       "(block %llu)!", i, block_bitmap);
 			return 0;
 		}
 		inode_bitmap = ext4_inode_bitmap(sb, gdp);
-		if (inode_bitmap < first_block || inode_bitmap > last_block)
-		{
+		if (inode_bitmap < first_block || inode_bitmap > last_block) {
 			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
 			       "Inode bitmap for group %lu not in group "
 			       "(block %llu)!", i, inode_bitmap);
@@ -1614,26 +1611,28 @@ static int ext4_check_descriptors(struct super_block *sb)
 		}
 		inode_table = ext4_inode_table(sb, gdp);
 		if (inode_table < first_block ||
-		    inode_table + sbi->s_itb_per_group - 1 > last_block)
-		{
+		    inode_table + sbi->s_itb_per_group - 1 > last_block) {
 			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
 			       "Inode table for group %lu not in group "
 			       "(block %llu)!", i, inode_table);
 			return 0;
 		}
+		spin_lock(sb_bgl_lock(sbi, i));
 		if (!ext4_group_desc_csum_verify(sbi, i, gdp)) {
 			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
 			       "Checksum for group %lu failed (%u!=%u)\n",
 			       i, le16_to_cpu(ext4_group_desc_csum(sbi, i,
 			       gdp)), le16_to_cpu(gdp->bg_checksum));
-			return 0;
+			if (!(sb->s_flags & MS_RDONLY))
+				return 0;
 		}
+		spin_unlock(sb_bgl_lock(sbi, i));
 		if (!flexbg_flag)
 			first_block += EXT4_BLOCKS_PER_GROUP(sb);
 	}
 
 	ext4_free_blocks_count_set(sbi->s_es, ext4_count_free_blocks(sb));
-	sbi->s_es->s_free_inodes_count=cpu_to_le32(ext4_count_free_inodes(sb));
+	sbi->s_es->s_free_inodes_count = cpu_to_le32(ext4_count_free_inodes(sb));
 	return 1;
 }
 
@@ -1654,8 +1653,8 @@ static int ext4_check_descriptors(struct super_block *sb)
  * e2fsck was run on this filesystem, and it must have already done the orphan
  * inode cleanup for us, so we can safely abort without any further action.
  */
-static void ext4_orphan_cleanup (struct super_block * sb,
-				 struct ext4_super_block * es)
+static void ext4_orphan_cleanup(struct super_block *sb,
+				struct ext4_super_block *es)
 {
 	unsigned int s_flags = sb->s_flags;
 	int nr_orphans = 0, nr_truncates = 0;
@@ -1732,7 +1731,7 @@ static void ext4_orphan_cleanup (struct super_block * sb,
 		iput(inode);  /* The delete magic happens here! */
 	}
 
-#define PLURAL(x) (x), ((x)==1) ? "" : "s"
+#define PLURAL(x) (x), ((x) == 1) ? "" : "s"
 
 	if (nr_orphans)
 		printk(KERN_INFO "EXT4-fs: %s: %d orphan inode%s deleted\n",
@@ -1899,12 +1898,12 @@ static unsigned long ext4_get_stripe_size(struct ext4_sb_info *sbi)
 	return 0;
 }
 
-static int ext4_fill_super (struct super_block *sb, void *data, int silent)
+static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 				__releases(kernel_lock)
 				__acquires(kernel_lock)
 
 {
-	struct buffer_head * bh;
+	struct buffer_head *bh;
 	struct ext4_super_block *es = NULL;
 	struct ext4_sb_info *sbi;
 	ext4_fsblk_t block;
@@ -1953,7 +1952,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 	}
 
 	if (!(bh = sb_bread(sb, logical_sb_block))) {
-		printk (KERN_ERR "EXT4-fs: unable to read superblock\n");
+		printk(KERN_ERR "EXT4-fs: unable to read superblock\n");
 		goto out_fail;
 	}
 	/*
@@ -2026,8 +2025,8 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 	set_opt(sbi->s_mount_opt, DELALLOC);
 
 
-	if (!parse_options ((char *) data, sb, &journal_inum, &journal_devnum,
-			    NULL, 0))
+	if (!parse_options((char *) data, sb, &journal_inum, &journal_devnum,
+			   NULL, 0))
 		goto failed_mount;
 
 	sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
@@ -2102,7 +2101,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 			goto failed_mount;
 		}
 
-		brelse (bh);
+		brelse(bh);
 		logical_sb_block = sb_block * EXT4_MIN_BLOCK_SIZE;
 		offset = do_div(logical_sb_block, blocksize);
 		bh = sb_bread(sb, logical_sb_block);
@@ -2114,8 +2113,8 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 		es = (struct ext4_super_block *)(((char *)bh->b_data) + offset);
 		sbi->s_es = es;
 		if (es->s_magic != cpu_to_le16(EXT4_SUPER_MAGIC)) {
-			printk (KERN_ERR
-				"EXT4-fs: Magic mismatch, very weird !\n");
+			printk(KERN_ERR
+			       "EXT4-fs: Magic mismatch, very weird !\n");
 			goto failed_mount;
 		}
 	}
@@ -2132,9 +2131,9 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 		if ((sbi->s_inode_size < EXT4_GOOD_OLD_INODE_SIZE) ||
 		    (!is_power_of_2(sbi->s_inode_size)) ||
 		    (sbi->s_inode_size > blocksize)) {
-			printk (KERN_ERR
-				"EXT4-fs: unsupported inode size: %d\n",
-				sbi->s_inode_size);
+			printk(KERN_ERR
+			       "EXT4-fs: unsupported inode size: %d\n",
+			       sbi->s_inode_size);
 			goto failed_mount;
 		}
 		if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE)
@@ -2166,20 +2165,20 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 	sbi->s_mount_state = le16_to_cpu(es->s_state);
 	sbi->s_addr_per_block_bits = ilog2(EXT4_ADDR_PER_BLOCK(sb));
 	sbi->s_desc_per_block_bits = ilog2(EXT4_DESC_PER_BLOCK(sb));
-	for (i=0; i < 4; i++)
+	for (i = 0; i < 4; i++)
 		sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
 	sbi->s_def_hash_version = es->s_def_hash_version;
 
 	if (sbi->s_blocks_per_group > blocksize * 8) {
-		printk (KERN_ERR
-			"EXT4-fs: #blocks per group too big: %lu\n",
-			sbi->s_blocks_per_group);
+		printk(KERN_ERR
+		       "EXT4-fs: #blocks per group too big: %lu\n",
+		       sbi->s_blocks_per_group);
 		goto failed_mount;
 	}
 	if (sbi->s_inodes_per_group > blocksize * 8) {
-		printk (KERN_ERR
-			"EXT4-fs: #inodes per group too big: %lu\n",
-			sbi->s_inodes_per_group);
+		printk(KERN_ERR
+		       "EXT4-fs: #inodes per group too big: %lu\n",
+		       sbi->s_inodes_per_group);
 		goto failed_mount;
 	}
 
@@ -2213,10 +2212,10 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 	sbi->s_groups_count = blocks_count;
 	db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) /
 		   EXT4_DESC_PER_BLOCK(sb);
-	sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
+	sbi->s_group_desc = kmalloc(db_count * sizeof(struct buffer_head *),
 				    GFP_KERNEL);
 	if (sbi->s_group_desc == NULL) {
-		printk (KERN_ERR "EXT4-fs: not enough memory\n");
+		printk(KERN_ERR "EXT4-fs: not enough memory\n");
 		goto failed_mount;
 	}
 
@@ -2226,13 +2225,13 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 		block = descriptor_loc(sb, logical_sb_block, i);
 		sbi->s_group_desc[i] = sb_bread(sb, block);
 		if (!sbi->s_group_desc[i]) {
-			printk (KERN_ERR "EXT4-fs: "
-				"can't read group descriptor %d\n", i);
+			printk(KERN_ERR "EXT4-fs: "
+			       "can't read group descriptor %d\n", i);
 			db_count = i;
 			goto failed_mount2;
 		}
 	}
-	if (!ext4_check_descriptors (sb)) {
+	if (!ext4_check_descriptors(sb)) {
 		printk(KERN_ERR "EXT4-fs: group descriptors corrupted!\n");
 		goto failed_mount2;
 	}
@@ -2308,11 +2307,11 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 		    EXT4_SB(sb)->s_journal->j_failed_commit) {
 			printk(KERN_CRIT "EXT4-fs error (device %s): "
 			       "ext4_fill_super: Journal transaction "
-			       "%u is corrupt\n", sb->s_id, 
+			       "%u is corrupt\n", sb->s_id,
 			       EXT4_SB(sb)->s_journal->j_failed_commit);
-			if (test_opt (sb, ERRORS_RO)) {
-				printk (KERN_CRIT
-					"Mounting filesystem read-only\n");
+			if (test_opt(sb, ERRORS_RO)) {
+				printk(KERN_CRIT
+				       "Mounting filesystem read-only\n");
 				sb->s_flags |= MS_RDONLY;
 				EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 				es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
@@ -2332,9 +2331,9 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 			goto failed_mount3;
 	} else {
 		if (!silent)
-			printk (KERN_ERR
-				"ext4: No journal on filesystem on %s\n",
-				sb->s_id);
+			printk(KERN_ERR
+			       "ext4: No journal on filesystem on %s\n",
+			       sb->s_id);
 		goto failed_mount3;
 	}
 
@@ -2418,7 +2417,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 		goto failed_mount4;
 	}
 
-	ext4_setup_super (sb, es, sb->s_flags & MS_RDONLY);
+	ext4_setup_super(sb, es, sb->s_flags & MS_RDONLY);
 
 	/* determine the minimum size of new large inodes, if present */
 	if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) {
@@ -2457,12 +2456,12 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
 	ext4_orphan_cleanup(sb, es);
 	EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS;
 	if (needs_recovery)
-		printk (KERN_INFO "EXT4-fs: recovery complete.\n");
+		printk(KERN_INFO "EXT4-fs: recovery complete.\n");
 	ext4_mark_recovery_complete(sb, es);
-	printk (KERN_INFO "EXT4-fs: mounted filesystem with %s data mode.\n",
-		test_opt(sb,DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ? "journal":
-		test_opt(sb,DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA ? "ordered":
-		"writeback");
+	printk(KERN_INFO "EXT4-fs: mounted filesystem with %s data mode.\n",
+	       test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ? "journal":
+	       test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA ? "ordered":
+	       "writeback");
 
 	if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
 		printk(KERN_WARNING "EXT4-fs: Ignoring delalloc option - "
@@ -2575,14 +2574,14 @@ static journal_t *ext4_get_journal(struct super_block *sb,
 static journal_t *ext4_get_dev_journal(struct super_block *sb,
 				       dev_t j_dev)
 {
-	struct buffer_head * bh;
+	struct buffer_head *bh;
 	journal_t *journal;
 	ext4_fsblk_t start;
 	ext4_fsblk_t len;
 	int hblock, blocksize;
 	ext4_fsblk_t sb_block;
 	unsigned long offset;
-	struct ext4_super_block * es;
+	struct ext4_super_block *es;
 	struct block_device *bdev;
 
 	bdev = ext4_blkdev_get(j_dev);
@@ -2697,8 +2696,8 @@ static int ext4_load_journal(struct super_block *sb,
 					"unavailable, cannot proceed.\n");
 				return -EROFS;
 			}
-			printk (KERN_INFO "EXT4-fs: write access will "
-					"be enabled during recovery.\n");
+			printk(KERN_INFO "EXT4-fs: write access will "
+			       "be enabled during recovery.\n");
 		}
 	}
 
@@ -2751,8 +2750,8 @@ static int ext4_load_journal(struct super_block *sb,
 	return 0;
 }
 
-static int ext4_create_journal(struct super_block * sb,
-			       struct ext4_super_block * es,
+static int ext4_create_journal(struct super_block *sb,
+			       struct ext4_super_block *es,
 			       unsigned int journal_inum)
 {
 	journal_t *journal;
@@ -2793,9 +2792,8 @@ static int ext4_create_journal(struct super_block * sb,
 	return 0;
 }
 
-static void ext4_commit_super (struct super_block * sb,
-			       struct ext4_super_block * es,
-			       int sync)
+static void ext4_commit_super(struct super_block *sb,
+			      struct ext4_super_block *es, int sync)
 {
 	struct buffer_head *sbh = EXT4_SB(sb)->s_sbh;
 
@@ -2816,8 +2814,8 @@ static void ext4_commit_super (struct super_block * sb,
  * remounting) the filesystem readonly, then we will end up with a
  * consistent fs on disk.  Record that fact.
  */
-static void ext4_mark_recovery_complete(struct super_block * sb,
-					struct ext4_super_block * es)
+static void ext4_mark_recovery_complete(struct super_block *sb,
+					struct ext4_super_block *es)
 {
 	journal_t *journal = EXT4_SB(sb)->s_journal;
 
@@ -2839,8 +2837,8 @@ static void ext4_mark_recovery_complete(struct super_block * sb,
  * has recorded an error from a previous lifetime, move that error to the
  * main filesystem now.
  */
-static void ext4_clear_journal_err(struct super_block * sb,
-				   struct ext4_super_block * es)
+static void ext4_clear_journal_err(struct super_block *sb,
+				   struct ext4_super_block *es)
 {
 	journal_t *journal;
 	int j_errno;
@@ -2865,7 +2863,7 @@ static void ext4_clear_journal_err(struct super_block * sb,
 
 		EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 		es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
-		ext4_commit_super (sb, es, 1);
+		ext4_commit_super(sb, es, 1);
 
 		jbd2_journal_clear_err(journal);
 	}
@@ -2898,7 +2896,7 @@ int ext4_force_commit(struct super_block *sb)
  * This implicitly triggers the writebehind on sync().
  */
 
-static void ext4_write_super (struct super_block * sb)
+static void ext4_write_super(struct super_block *sb)
 {
 	if (mutex_trylock(&sb->s_lock) != 0)
 		BUG();
@@ -2954,13 +2952,14 @@ static void ext4_unlockfs(struct super_block *sb)
 	}
 }
 
-static int ext4_remount (struct super_block * sb, int * flags, char * data)
+static int ext4_remount(struct super_block *sb, int *flags, char *data)
 {
-	struct ext4_super_block * es;
+	struct ext4_super_block *es;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	ext4_fsblk_t n_blocks_count = 0;
 	unsigned long old_sb_flags;
 	struct ext4_mount_options old_opts;
+	ext4_group_t g;
 	int err;
 #ifdef CONFIG_QUOTA
 	int i;
@@ -3039,6 +3038,26 @@ static int ext4_remount (struct super_block * sb, int * flags, char * data)
 			}
 
 			/*
+			 * Make sure the group descriptor checksums
+			 * are sane.  If they aren't, refuse to
+			 * remount r/w.
+			 */
+			for (g = 0; g < sbi->s_groups_count; g++) {
+				struct ext4_group_desc *gdp =
+					ext4_get_group_desc(sb, g, NULL);
+
+				if (!ext4_group_desc_csum_verify(sbi, g, gdp)) {
+					printk(KERN_ERR
+	       "EXT4-fs: ext4_remount: "
+		"Checksum for group %lu failed (%u!=%u)\n",
+		g, le16_to_cpu(ext4_group_desc_csum(sbi, g, gdp)),
+					       le16_to_cpu(gdp->bg_checksum));
+					err = -EINVAL;
+					goto restore_opts;
+				}
+			}
+
+			/*
 			 * If we have an unprocessed orphan list hanging
 			 * around from a previously readonly bdev mount,
 			 * require a full umount/remount for now.
@@ -3063,7 +3082,7 @@ static int ext4_remount (struct super_block * sb, int * flags, char * data)
 			sbi->s_mount_state = le16_to_cpu(es->s_state);
 			if ((err = ext4_group_extend(sb, es, n_blocks_count)))
 				goto restore_opts;
-			if (!ext4_setup_super (sb, es, 0))
+			if (!ext4_setup_super(sb, es, 0))
 				sb->s_flags &= ~MS_RDONLY;
 		}
 	}
@@ -3093,7 +3112,7 @@ restore_opts:
 	return err;
 }
 
-static int ext4_statfs (struct dentry * dentry, struct kstatfs * buf)
+static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf)
 {
 	struct super_block *sb = dentry->d_sb;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
@@ -3331,12 +3350,12 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 	}
 	/* Journaling quota? */
 	if (EXT4_SB(sb)->s_qf_names[type]) {
-		/* Quotafile not of fs root? */
+		/* Quotafile not in fs root? */
 		if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
 			printk(KERN_WARNING
 				"EXT4-fs: Quota file not on filesystem root. "
 				"Journaled quota will not work.\n");
- 	}
+	}
 
 	/*
 	 * When we journal data on quota file, we have to flush journal to see
@@ -3352,8 +3371,9 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 		jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
 	}
 
+	err = vfs_quota_on_path(sb, type, format_id, &nd.path);
 	path_put(&nd.path);
-	return vfs_quota_on(sb, type, format_id, path, remount);
+	return err;
 }
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 93c5fdcdad2..8954208b489 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1512,7 +1512,7 @@ static inline void ext4_xattr_hash_entry(struct ext4_xattr_header *header,
 	char *name = entry->e_name;
 	int n;
 
-	for (n=0; n < entry->e_name_len; n++) {
+	for (n = 0; n < entry->e_name_len; n++) {
 		hash = (hash << NAME_HASH_SHIFT) ^
 		       (hash >> (8*sizeof(hash) - NAME_HASH_SHIFT)) ^
 		       *name++;
diff --git a/fs/fat/file.c b/fs/fat/file.c
index 8707a8cfa02..ddde37025ca 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -313,6 +313,8 @@ static int fat_allow_set_time(struct msdos_sb_info *sbi, struct inode *inode)
 	return 0;
 }
 
+#define TIMES_SET_FLAGS	(ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)
+
 int fat_setattr(struct dentry *dentry, struct iattr *attr)
 {
 	struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb);
@@ -336,9 +338,9 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr)
 
 	/* Check for setting the inode time. */
 	ia_valid = attr->ia_valid;
-	if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET)) {
+	if (ia_valid & TIMES_SET_FLAGS) {
 		if (fat_allow_set_time(sbi, inode))
-			attr->ia_valid &= ~(ATTR_MTIME_SET | ATTR_ATIME_SET);
+			attr->ia_valid &= ~TIMES_SET_FLAGS;
 	}
 
 	error = inode_change_ok(inode, attr);
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 6d266d793e2..80ff3381fa2 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -562,26 +562,23 @@ static int fat_write_inode(struct inode *inode, int wait)
 	struct buffer_head *bh;
 	struct msdos_dir_entry *raw_entry;
 	loff_t i_pos;
-	int err = 0;
+	int err;
 
 retry:
 	i_pos = MSDOS_I(inode)->i_pos;
 	if (inode->i_ino == MSDOS_ROOT_INO || !i_pos)
 		return 0;
 
-	lock_super(sb);
 	bh = sb_bread(sb, i_pos >> sbi->dir_per_block_bits);
 	if (!bh) {
 		printk(KERN_ERR "FAT: unable to read inode block "
 		       "for updating (i_pos %lld)\n", i_pos);
-		err = -EIO;
-		goto out;
+		return -EIO;
 	}
 	spin_lock(&sbi->inode_hash_lock);
 	if (i_pos != MSDOS_I(inode)->i_pos) {
 		spin_unlock(&sbi->inode_hash_lock);
 		brelse(bh);
-		unlock_super(sb);
 		goto retry;
 	}
 
@@ -607,11 +604,10 @@ retry:
 	}
 	spin_unlock(&sbi->inode_hash_lock);
 	mark_buffer_dirty(bh);
+	err = 0;
 	if (wait)
 		err = sync_dirty_buffer(bh);
 	brelse(bh);
-out:
-	unlock_super(sb);
 	return err;
 }
 
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 61d62513681..ac4f7db9f13 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -49,73 +49,6 @@ static int get_close_on_exec(unsigned int fd)
 	return res;
 }
 
-/*
- * locate_fd finds a free file descriptor in the open_fds fdset,
- * expanding the fd arrays if necessary.  Must be called with the
- * file_lock held for write.
- */
-
-static int locate_fd(unsigned int orig_start, int cloexec)
-{
-	struct files_struct *files = current->files;
-	unsigned int newfd;
-	unsigned int start;
-	int error;
-	struct fdtable *fdt;
-
-	spin_lock(&files->file_lock);
-repeat:
-	fdt = files_fdtable(files);
-	/*
-	 * Someone might have closed fd's in the range
-	 * orig_start..fdt->next_fd
-	 */
-	start = orig_start;
-	if (start < files->next_fd)
-		start = files->next_fd;
-
-	newfd = start;
-	if (start < fdt->max_fds)
-		newfd = find_next_zero_bit(fdt->open_fds->fds_bits,
-					   fdt->max_fds, start);
-
-	error = expand_files(files, newfd);
-	if (error < 0)
-		goto out;
-
-	/*
-	 * If we needed to expand the fs array we
-	 * might have blocked - try again.
-	 */
-	if (error)
-		goto repeat;
-
-	if (start <= files->next_fd)
-		files->next_fd = newfd + 1;
-
-	FD_SET(newfd, fdt->open_fds);
-	if (cloexec)
-		FD_SET(newfd, fdt->close_on_exec);
-	else
-		FD_CLR(newfd, fdt->close_on_exec);
-	error = newfd;
-
-out:
-	spin_unlock(&files->file_lock);
-	return error;
-}
-
-static int dupfd(struct file *file, unsigned int start, int cloexec)
-{
-	int fd = locate_fd(start, cloexec);
-	if (fd >= 0)
-		fd_install(fd, file);
-	else
-		fput(file);
-
-	return fd;
-}
-
 asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 {
 	int err = -EBADF;
@@ -130,31 +63,35 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 		return -EINVAL;
 
 	spin_lock(&files->file_lock);
-	if (!(file = fcheck(oldfd)))
-		goto out_unlock;
-	get_file(file);			/* We are now finished with oldfd */
-
 	err = expand_files(files, newfd);
+	file = fcheck(oldfd);
+	if (unlikely(!file))
+		goto Ebadf;
 	if (unlikely(err < 0)) {
 		if (err == -EMFILE)
-			err = -EBADF;
-		goto out_fput;
+			goto Ebadf;
+		goto out_unlock;
 	}
-
-	/* To avoid races with open() and dup(), we will mark the fd as
-	 * in-use in the open-file bitmap throughout the entire dup2()
-	 * process.  This is quite safe: do_close() uses the fd array
-	 * entry, not the bitmap, to decide what work needs to be
-	 * done.  --sct */
-	/* Doesn't work. open() might be there first. --AV */
-
-	/* Yes. It's a race. In user space. Nothing sane to do */
+	/*
+	 * We need to detect attempts to do dup2() over allocated but still
+	 * not finished descriptor.  NB: OpenBSD avoids that at the price of
+	 * extra work in their equivalent of fget() - they insert struct
+	 * file immediately after grabbing descriptor, mark it larval if
+	 * more work (e.g. actual opening) is needed and make sure that
+	 * fget() treats larval files as absent.  Potentially interesting,
+	 * but while extra work in fget() is trivial, locking implications
+	 * and amount of surgery on open()-related paths in VFS are not.
+	 * FreeBSD fails with -EBADF in the same situation, NetBSD "solution"
+	 * deadlocks in rather amusing ways, AFAICS.  All of that is out of
+	 * scope of POSIX or SUS, since neither considers shared descriptor
+	 * tables and this condition does not arise without those.
+	 */
 	err = -EBUSY;
 	fdt = files_fdtable(files);
 	tofree = fdt->fd[newfd];
 	if (!tofree && FD_ISSET(newfd, fdt->open_fds))
-		goto out_fput;
-
+		goto out_unlock;
+	get_file(file);
 	rcu_assign_pointer(fdt->fd[newfd], file);
 	FD_SET(newfd, fdt->open_fds);
 	if (flags & O_CLOEXEC)
@@ -165,17 +102,14 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 
 	if (tofree)
 		filp_close(tofree, files);
-	err = newfd;
-out:
-	return err;
-out_unlock:
-	spin_unlock(&files->file_lock);
-	goto out;
 
-out_fput:
+	return newfd;
+
+Ebadf:
+	err = -EBADF;
+out_unlock:
 	spin_unlock(&files->file_lock);
-	fput(file);
-	goto out;
+	return err;
 }
 
 asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
@@ -194,10 +128,15 @@ asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
 asmlinkage long sys_dup(unsigned int fildes)
 {
 	int ret = -EBADF;
-	struct file * file = fget(fildes);
-
-	if (file)
-		ret = dupfd(file, 0, 0);
+	struct file *file = fget(fildes);
+
+	if (file) {
+		ret = get_unused_fd();
+		if (ret >= 0)
+			fd_install(ret, file);
+		else
+			fput(file);
+	}
 	return ret;
 }
 
@@ -322,8 +261,11 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg,
 	case F_DUPFD_CLOEXEC:
 		if (arg >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
 			break;
-		get_file(filp);
-		err = dupfd(filp, arg, cmd == F_DUPFD_CLOEXEC);
+		err = alloc_fd(arg, cmd == F_DUPFD_CLOEXEC ? O_CLOEXEC : 0);
+		if (err >= 0) {
+			get_file(filp);
+			fd_install(err, filp);
+		}
 		break;
 	case F_GETFD:
 		err = get_close_on_exec(fd) ? FD_CLOEXEC : 0;
diff --git a/fs/file.c b/fs/file.c
index d8773b19fe4..f313314f996 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -6,6 +6,7 @@
  *  Manage the dynamic fd arrays in the process files_struct.
  */
 
+#include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/time.h>
@@ -432,3 +433,63 @@ struct files_struct init_files = {
 	},
 	.file_lock	= __SPIN_LOCK_UNLOCKED(init_task.file_lock),
 };
+
+/*
+ * allocate a file descriptor, mark it busy.
+ */
+int alloc_fd(unsigned start, unsigned flags)
+{
+	struct files_struct *files = current->files;
+	unsigned int fd;
+	int error;
+	struct fdtable *fdt;
+
+	spin_lock(&files->file_lock);
+repeat:
+	fdt = files_fdtable(files);
+	fd = start;
+	if (fd < files->next_fd)
+		fd = files->next_fd;
+
+	if (fd < fdt->max_fds)
+		fd = find_next_zero_bit(fdt->open_fds->fds_bits,
+					   fdt->max_fds, fd);
+
+	error = expand_files(files, fd);
+	if (error < 0)
+		goto out;
+
+	/*
+	 * If we needed to expand the fs array we
+	 * might have blocked - try again.
+	 */
+	if (error)
+		goto repeat;
+
+	if (start <= files->next_fd)
+		files->next_fd = fd + 1;
+
+	FD_SET(fd, fdt->open_fds);
+	if (flags & O_CLOEXEC)
+		FD_SET(fd, fdt->close_on_exec);
+	else
+		FD_CLR(fd, fdt->close_on_exec);
+	error = fd;
+#if 1
+	/* Sanity check */
+	if (rcu_dereference(fdt->fd[fd]) != NULL) {
+		printk(KERN_WARNING "alloc_fd: slot %d not NULL!\n", fd);
+		rcu_assign_pointer(fdt->fd[fd], NULL);
+	}
+#endif
+
+out:
+	spin_unlock(&files->file_lock);
+	return error;
+}
+
+int get_unused_fd(void)
+{
+	return alloc_fd(0, 0);
+}
+EXPORT_SYMBOL(get_unused_fd);
diff --git a/fs/inode.c b/fs/inode.c
index b6726f64453..0487ddba139 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -166,6 +166,7 @@ static struct inode *alloc_inode(struct super_block *sb)
 		mapping_set_gfp_mask(mapping, GFP_HIGHUSER_PAGECACHE);
 		mapping->assoc_mapping = NULL;
 		mapping->backing_dev_info = &default_backing_dev_info;
+		mapping->writeback_index = 0;
 
 		/*
 		 * If the block_device provides a backing_dev_info for client
diff --git a/fs/ioprio.c b/fs/ioprio.c
index c4a1c3c65aa..da3cc460d4d 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -115,11 +115,11 @@ asmlinkage long sys_ioprio_set(int which, int who, int ioprio)
 				pgrp = task_pgrp(current);
 			else
 				pgrp = find_vpid(who);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				ret = set_task_ioprio(p, ioprio);
 				if (ret)
 					break;
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case IOPRIO_WHO_USER:
 			if (!who)
@@ -204,7 +204,7 @@ asmlinkage long sys_ioprio_get(int which, int who)
 				pgrp = task_pgrp(current);
 			else
 				pgrp = find_vpid(who);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				tmpio = get_task_ioprio(p);
 				if (tmpio < 0)
 					continue;
@@ -212,7 +212,7 @@ asmlinkage long sys_ioprio_get(int which, int who)
 					ret = tmpio;
 				else
 					ret = ioprio_best(ret, tmpio);
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case IOPRIO_WHO_USER:
 			if (!who)
diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index 2eccbfaa1d4..ae08c057e75 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -63,7 +63,7 @@ static void release_buffer_page(struct buffer_head *bh)
 		goto nope;
 
 	/* OK, it's a truncated page */
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		goto nope;
 
 	page_cache_get(page);
@@ -221,7 +221,7 @@ write_out_data:
 		 * blocking lock_buffer().
 		 */
 		if (buffer_dirty(bh)) {
-			if (test_set_buffer_locked(bh)) {
+			if (!trylock_buffer(bh)) {
 				BUFFER_TRACE(bh, "needs blocking lock");
 				spin_unlock(&journal->j_list_lock);
 				/* Write out all data to prevent deadlocks */
@@ -446,7 +446,7 @@ void journal_commit_transaction(journal_t *journal)
 			spin_lock(&journal->j_list_lock);
 		}
 		if (unlikely(!buffer_uptodate(bh))) {
-			if (TestSetPageLocked(bh->b_page)) {
+			if (!trylock_page(bh->b_page)) {
 				spin_unlock(&journal->j_list_lock);
 				lock_page(bh->b_page);
 				spin_lock(&journal->j_list_lock);
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 8dee3200750..0540ca27a44 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -291,7 +291,7 @@ handle_t *journal_start(journal_t *journal, int nblocks)
 		goto out;
 	}
 
-	lock_acquire(&handle->h_lockdep_map, 0, 0, 0, 2, _THIS_IP_);
+	lock_map_acquire(&handle->h_lockdep_map);
 
 out:
 	return handle;
@@ -1448,7 +1448,7 @@ int journal_stop(handle_t *handle)
 		spin_unlock(&journal->j_state_lock);
 	}
 
-	lock_release(&handle->h_lockdep_map, 1, _THIS_IP_);
+	lock_map_release(&handle->h_lockdep_map);
 
 	jbd_free_handle(handle);
 	return err;
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index f8b3be87322..f2ad061e95e 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -67,7 +67,7 @@ static void release_buffer_page(struct buffer_head *bh)
 		goto nope;
 
 	/* OK, it's a truncated page */
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		goto nope;
 
 	page_cache_get(page);
@@ -262,8 +262,18 @@ static int journal_finish_inode_data_buffers(journal_t *journal,
 		jinode->i_flags |= JI_COMMIT_RUNNING;
 		spin_unlock(&journal->j_list_lock);
 		err = filemap_fdatawait(jinode->i_vfs_inode->i_mapping);
-		if (!ret)
-			ret = err;
+		if (err) {
+			/*
+			 * Because AS_EIO is cleared by
+			 * wait_on_page_writeback_range(), set it again so
+			 * that user process can get -EIO from fsync().
+			 */
+			set_bit(AS_EIO,
+				&jinode->i_vfs_inode->i_mapping->flags);
+
+			if (!ret)
+				ret = err;
+		}
 		spin_lock(&journal->j_list_lock);
 		jinode->i_flags &= ~JI_COMMIT_RUNNING;
 		wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING);
@@ -670,8 +680,14 @@ start_journal_io:
 	 * commit block, which happens below in such setting.
 	 */
 	err = journal_finish_inode_data_buffers(journal, commit_transaction);
-	if (err)
-		jbd2_journal_abort(journal, err);
+	if (err) {
+		char b[BDEVNAME_SIZE];
+
+		printk(KERN_WARNING
+			"JBD2: Detected IO errors while flushing file data "
+			"on %s\n", bdevname(journal->j_fs_dev, b));
+		err = 0;
+	}
 
 	/* Lo and behold: we have just managed to send a transaction to
            the log.  Before we can commit it, wait for the IO so far to
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index b26c6d9fe6a..8207a01c4ed 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -68,7 +68,6 @@ EXPORT_SYMBOL(jbd2_journal_set_features);
 EXPORT_SYMBOL(jbd2_journal_create);
 EXPORT_SYMBOL(jbd2_journal_load);
 EXPORT_SYMBOL(jbd2_journal_destroy);
-EXPORT_SYMBOL(jbd2_journal_update_superblock);
 EXPORT_SYMBOL(jbd2_journal_abort);
 EXPORT_SYMBOL(jbd2_journal_errno);
 EXPORT_SYMBOL(jbd2_journal_ack_err);
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 4f7cadbb19f..e5d540588fa 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -301,7 +301,7 @@ handle_t *jbd2_journal_start(journal_t *journal, int nblocks)
 		goto out;
 	}
 
-	lock_acquire(&handle->h_lockdep_map, 0, 0, 0, 2, _THIS_IP_);
+	lock_map_acquire(&handle->h_lockdep_map);
 out:
 	return handle;
 }
@@ -1279,7 +1279,7 @@ int jbd2_journal_stop(handle_t *handle)
 		spin_unlock(&journal->j_state_lock);
 	}
 
-	lock_release(&handle->h_lockdep_map, 1, _THIS_IP_);
+	lock_map_release(&handle->h_lockdep_map);
 
 	jbd2_free_handle(handle);
 	return err;
diff --git a/fs/jffs2/jffs2_fs_i.h b/fs/jffs2/jffs2_fs_i.h
index 31559f45fdd..4c41db91eaa 100644
--- a/fs/jffs2/jffs2_fs_i.h
+++ b/fs/jffs2/jffs2_fs_i.h
@@ -12,7 +12,6 @@
 #ifndef _JFFS2_FS_I
 #define _JFFS2_FS_I
 
-#include <linux/version.h>
 #include <linux/rbtree.h>
 #include <linux/posix_acl.h>
 #include <linux/mutex.h>
diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c
index 629af01e5ad..6caf1e1ee26 100644
--- a/fs/jffs2/summary.c
+++ b/fs/jffs2/summary.c
@@ -23,6 +23,8 @@
 
 int jffs2_sum_init(struct jffs2_sb_info *c)
 {
+	uint32_t sum_size = max_t(uint32_t, c->sector_size, MAX_SUMMARY_SIZE);
+
 	c->summary = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
 
 	if (!c->summary) {
@@ -30,7 +32,7 @@ int jffs2_sum_init(struct jffs2_sb_info *c)
 		return -ENOMEM;
 	}
 
-	c->summary->sum_buf = vmalloc(c->sector_size);
+	c->summary->sum_buf = kmalloc(sum_size, GFP_KERNEL);
 
 	if (!c->summary->sum_buf) {
 		JFFS2_WARNING("Can't allocate buffer for writing out summary information!\n");
@@ -49,7 +51,7 @@ void jffs2_sum_exit(struct jffs2_sb_info *c)
 
 	jffs2_sum_disable_collecting(c->summary);
 
-	vfree(c->summary->sum_buf);
+	kfree(c->summary->sum_buf);
 	c->summary->sum_buf = NULL;
 
 	kfree(c->summary);
@@ -665,7 +667,7 @@ crc_err:
 /* Write summary data to flash - helper function for jffs2_sum_write_sumnode() */
 
 static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
-					uint32_t infosize, uint32_t datasize, int padsize)
+				uint32_t infosize, uint32_t datasize, int padsize)
 {
 	struct jffs2_raw_summary isum;
 	union jffs2_sum_mem *temp;
@@ -676,6 +678,26 @@ static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock
 	int ret;
 	size_t retlen;
 
+	if (padsize + datasize > MAX_SUMMARY_SIZE) {
+		/* It won't fit in the buffer. Abort summary for this jeb */
+		jffs2_sum_disable_collecting(c->summary);
+
+		JFFS2_WARNING("Summary too big (%d data, %d pad) in eraseblock at %08x\n",
+			      datasize, padsize, jeb->offset);
+		/* Non-fatal */
+		return 0;
+	}
+	/* Is there enough space for summary? */
+	if (padsize < 0) {
+		/* don't try to write out summary for this jeb */
+		jffs2_sum_disable_collecting(c->summary);
+
+		JFFS2_WARNING("Not enough space for summary, padsize = %d\n",
+			      padsize);
+		/* Non-fatal */
+		return 0;
+	}
+
 	memset(c->summary->sum_buf, 0xff, datasize);
 	memset(&isum, 0, sizeof(isum));
 
@@ -821,7 +843,7 @@ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c)
 {
 	int datasize, infosize, padsize;
 	struct jffs2_eraseblock *jeb;
-	int ret;
+	int ret = 0;
 
 	dbg_summary("called\n");
 
@@ -841,16 +863,6 @@ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c)
 	infosize += padsize;
 	datasize += padsize;
 
-	/* Is there enough space for summary? */
-	if (padsize < 0) {
-		/* don't try to write out summary for this jeb */
-		jffs2_sum_disable_collecting(c->summary);
-
-		JFFS2_WARNING("Not enough space for summary, padsize = %d\n", padsize);
-		spin_lock(&c->erase_completion_lock);
-		return 0;
-	}
-
 	ret = jffs2_sum_write_data(c, jeb, infosize, datasize, padsize);
 	spin_lock(&c->erase_completion_lock);
 	return ret;
diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h
index 8bf34f2fa5c..60207a2ae95 100644
--- a/fs/jffs2/summary.h
+++ b/fs/jffs2/summary.h
@@ -13,6 +13,12 @@
 #ifndef JFFS2_SUMMARY_H
 #define JFFS2_SUMMARY_H
 
+/* Limit summary size to 64KiB so that we can kmalloc it. If the summary
+   is larger than that, we have to just ditch it and avoid using summary
+   for the eraseblock in question... and it probably doesn't hurt us much
+   anyway. */
+#define MAX_SUMMARY_SIZE 65536
+
 #include <linux/uio.h>
 #include <linux/jffs2.h>
 
diff --git a/fs/libfs.c b/fs/libfs.c
index baeb71ee1cd..1add676a19d 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -216,8 +216,8 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name,
 
 	s->s_flags = MS_NOUSER;
 	s->s_maxbytes = ~0ULL;
-	s->s_blocksize = 1024;
-	s->s_blocksize_bits = 10;
+	s->s_blocksize = PAGE_SIZE;
+	s->s_blocksize_bits = PAGE_SHIFT;
 	s->s_magic = magic;
 	s->s_op = ops ? ops : &simple_super_operations;
 	s->s_time_gran = 1;
diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c
index 39944463933..4a714f64515 100644
--- a/fs/lockd/svc4proc.c
+++ b/fs/lockd/svc4proc.c
@@ -83,7 +83,7 @@ nlm4svc_proc_test(struct svc_rqst *rqstp, struct nlm_args *argp,
 {
 	struct nlm_host	*host;
 	struct nlm_file	*file;
-	int rc = rpc_success;
+	__be32 rc = rpc_success;
 
 	dprintk("lockd: TEST4        called\n");
 	resp->cookie = argp->cookie;
@@ -116,7 +116,7 @@ nlm4svc_proc_lock(struct svc_rqst *rqstp, struct nlm_args *argp,
 {
 	struct nlm_host	*host;
 	struct nlm_file	*file;
-	int rc = rpc_success;
+	__be32 rc = rpc_success;
 
 	dprintk("lockd: LOCK          called\n");
 
diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c
index 76019d2ff72..76262c1986f 100644
--- a/fs/lockd/svcproc.c
+++ b/fs/lockd/svcproc.c
@@ -112,7 +112,7 @@ nlmsvc_proc_test(struct svc_rqst *rqstp, struct nlm_args *argp,
 {
 	struct nlm_host	*host;
 	struct nlm_file	*file;
-	int rc = rpc_success;
+	__be32 rc = rpc_success;
 
 	dprintk("lockd: TEST          called\n");
 	resp->cookie = argp->cookie;
@@ -146,7 +146,7 @@ nlmsvc_proc_lock(struct svc_rqst *rqstp, struct nlm_args *argp,
 {
 	struct nlm_host	*host;
 	struct nlm_file	*file;
-	int rc = rpc_success;
+	__be32 rc = rpc_success;
 
 	dprintk("lockd: LOCK          called\n");
 
diff --git a/fs/namei.c b/fs/namei.c
index a7b0a0b8012..4ea63ed5e79 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -274,7 +274,7 @@ int inode_permission(struct inode *inode, int mask)
 		return retval;
 
 	return security_inode_permission(inode,
-			mask & (MAY_READ|MAY_WRITE|MAY_EXEC));
+			mask & (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND));
 }
 
 /**
@@ -1431,8 +1431,7 @@ static int may_delete(struct inode *dir,struct dentry *victim,int isdir)
  *  3. We should have write and exec permissions on dir
  *  4. We can't do it if dir is immutable (done in permission())
  */
-static inline int may_create(struct inode *dir, struct dentry *child,
-			     struct nameidata *nd)
+static inline int may_create(struct inode *dir, struct dentry *child)
 {
 	if (child->d_inode)
 		return -EEXIST;
@@ -1504,7 +1503,7 @@ void unlock_rename(struct dentry *p1, struct dentry *p2)
 int vfs_create(struct inode *dir, struct dentry *dentry, int mode,
 		struct nameidata *nd)
 {
-	int error = may_create(dir, dentry, nd);
+	int error = may_create(dir, dentry);
 
 	if (error)
 		return error;
@@ -1948,7 +1947,7 @@ EXPORT_SYMBOL_GPL(lookup_create);
 
 int vfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
 {
-	int error = may_create(dir, dentry, NULL);
+	int error = may_create(dir, dentry);
 
 	if (error)
 		return error;
@@ -2049,7 +2048,7 @@ asmlinkage long sys_mknod(const char __user *filename, int mode, unsigned dev)
 
 int vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 {
-	int error = may_create(dir, dentry, NULL);
+	int error = may_create(dir, dentry);
 
 	if (error)
 		return error;
@@ -2316,7 +2315,7 @@ asmlinkage long sys_unlink(const char __user *pathname)
 
 int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname)
 {
-	int error = may_create(dir, dentry, NULL);
+	int error = may_create(dir, dentry);
 
 	if (error)
 		return error;
@@ -2386,7 +2385,7 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de
 	if (!inode)
 		return -ENOENT;
 
-	error = may_create(dir, new_dentry, NULL);
+	error = may_create(dir, new_dentry);
 	if (error)
 		return error;
 
@@ -2595,7 +2594,7 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		return error;
 
 	if (!new_dentry->d_inode)
-		error = may_create(new_dir, new_dentry, NULL);
+		error = may_create(new_dir, new_dentry);
 	else
 		error = may_delete(new_dir, new_dentry, is_dir);
 	if (error)
diff --git a/fs/namespace.c b/fs/namespace.c
index 411728c0c8b..6e283c93b50 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1667,31 +1667,31 @@ static noinline int do_new_mount(struct nameidata *nd, char *type, int flags,
 	if (IS_ERR(mnt))
 		return PTR_ERR(mnt);
 
-	return do_add_mount(mnt, nd, mnt_flags, NULL);
+	return do_add_mount(mnt, &nd->path, mnt_flags, NULL);
 }
 
 /*
  * add a mount into a namespace's mount tree
  * - provide the option of adding the new mount to an expiration list
  */
-int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
+int do_add_mount(struct vfsmount *newmnt, struct path *path,
 		 int mnt_flags, struct list_head *fslist)
 {
 	int err;
 
 	down_write(&namespace_sem);
 	/* Something was mounted here while we slept */
-	while (d_mountpoint(nd->path.dentry) &&
-	       follow_down(&nd->path.mnt, &nd->path.dentry))
+	while (d_mountpoint(path->dentry) &&
+	       follow_down(&path->mnt, &path->dentry))
 		;
 	err = -EINVAL;
-	if (!check_mnt(nd->path.mnt))
+	if (!check_mnt(path->mnt))
 		goto unlock;
 
 	/* Refuse the same filesystem on the same mount point */
 	err = -EBUSY;
-	if (nd->path.mnt->mnt_sb == newmnt->mnt_sb &&
-	    nd->path.mnt->mnt_root == nd->path.dentry)
+	if (path->mnt->mnt_sb == newmnt->mnt_sb &&
+	    path->mnt->mnt_root == path->dentry)
 		goto unlock;
 
 	err = -EINVAL;
@@ -1699,7 +1699,7 @@ int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
 		goto unlock;
 
 	newmnt->mnt_flags = mnt_flags;
-	if ((err = graft_tree(newmnt, &nd->path)))
+	if ((err = graft_tree(newmnt, path)))
 		goto unlock;
 
 	if (fslist) /* add to the specified expiration list */
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index 2f285ef7639..66df08dd1ca 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -129,7 +129,7 @@ static void * nfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
 		goto out_err;
 
 	mntget(mnt);
-	err = do_add_mount(mnt, nd, nd->path.mnt->mnt_flags|MNT_SHRINKABLE,
+	err = do_add_mount(mnt, &nd->path, nd->path.mnt->mnt_flags|MNT_SHRINKABLE,
 			   &nfs_automount_list);
 	if (err < 0) {
 		mntput(mnt);
diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index 8478fc25dae..46763d1cd39 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -127,7 +127,7 @@ enum {
 	Opt_err
 };
 
-static match_table_t __initconst tokens = {
+static match_table_t __initdata tokens = {
 	{Opt_port, "port=%u"},
 	{Opt_rsize, "rsize=%u"},
 	{Opt_wsize, "wsize=%u"},
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 9abcd2b329f..e9b20173fef 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1279,6 +1279,12 @@ static int nfs_parse_mount_options(char *raw,
 		}
 	}
 
+	if (errors > 0) {
+		dfprintk(MOUNT, "NFS: parsing encountered %d error%s\n",
+				errors, (errors == 1 ? "" : "s"));
+		if (!sloppy)
+			return 0;
+	}
 	return 1;
 
 out_nomem:
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 33bfcf09db4..9dc036f1835 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -1023,7 +1023,7 @@ exp_export(struct nfsctl_export *nxp)
 	/* Look up the dentry */
 	err = path_lookup(nxp->ex_path, 0, &nd);
 	if (err)
-		goto out_unlock;
+		goto out_put_clp;
 	err = -EINVAL;
 
 	exp = exp_get_by_name(clp, nd.path.mnt, nd.path.dentry, NULL);
@@ -1090,9 +1090,9 @@ finish:
 		exp_put(exp);
 	if (fsid_key && !IS_ERR(fsid_key))
 		cache_put(&fsid_key->h, &svc_expkey_cache);
-	if (clp)
-		auth_domain_put(clp);
 	path_put(&nd.path);
+out_put_clp:
+	auth_domain_put(clp);
 out_unlock:
 	exp_writeunlock();
 out:
diff --git a/fs/nfsd/nfs4acl.c b/fs/nfsd/nfs4acl.c
index b6ed38380ab..54b8b4140c8 100644
--- a/fs/nfsd/nfs4acl.c
+++ b/fs/nfsd/nfs4acl.c
@@ -443,7 +443,7 @@ init_state(struct posix_acl_state *state, int cnt)
 	 * enough space for either:
 	 */
 	alloc = sizeof(struct posix_ace_state_array)
-		+ cnt*sizeof(struct posix_ace_state);
+		+ cnt*sizeof(struct posix_user_ace_state);
 	state->users = kzalloc(alloc, GFP_KERNEL);
 	if (!state->users)
 		return -ENOMEM;
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index eef1629806f..e5b51ffafc6 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -851,7 +851,7 @@ struct nfsd4_operation {
 
 static struct nfsd4_operation nfsd4_ops[];
 
-static inline char *nfsd4_op_name(unsigned opnum);
+static const char *nfsd4_op_name(unsigned opnum);
 
 /*
  * COMPOUND call.
@@ -867,11 +867,6 @@ nfsd4_proc_compound(struct svc_rqst *rqstp,
 	int		slack_bytes;
 	__be32		status;
 
-	status = nfserr_resource;
-	cstate = cstate_alloc();
-	if (cstate == NULL)
-		goto out;
-
 	resp->xbuf = &rqstp->rq_res;
 	resp->p = rqstp->rq_res.head[0].iov_base + rqstp->rq_res.head[0].iov_len;
 	resp->tagp = resp->p;
@@ -890,6 +885,11 @@ nfsd4_proc_compound(struct svc_rqst *rqstp,
 	if (args->minorversion > NFSD_SUPPORTED_MINOR_VERSION)
 		goto out;
 
+	status = nfserr_resource;
+	cstate = cstate_alloc();
+	if (cstate == NULL)
+		goto out;
+
 	status = nfs_ok;
 	while (!status && resp->opcnt < args->opcnt) {
 		op = &args->ops[resp->opcnt++];
@@ -957,9 +957,9 @@ encode_op:
 		nfsd4_increment_op_stats(op->opnum);
 	}
 
+	cstate_free(cstate);
 out:
 	nfsd4_release_compoundargs(args);
-	cstate_free(cstate);
 	dprintk("nfsv4 compound returned %d\n", ntohl(status));
 	return status;
 }
@@ -1116,8 +1116,7 @@ static struct nfsd4_operation nfsd4_ops[OP_RELEASE_LOCKOWNER+1] = {
 	},
 };
 
-static inline char *
-nfsd4_op_name(unsigned opnum)
+static const char *nfsd4_op_name(unsigned opnum)
 {
 	if (opnum < ARRAY_SIZE(nfsd4_ops))
 		return nfsd4_ops[opnum].op_name;
diff --git a/fs/ntfs/aops.c b/fs/ntfs/aops.c
index 00e9ccde8e4..b38f944f066 100644
--- a/fs/ntfs/aops.c
+++ b/fs/ntfs/aops.c
@@ -1194,7 +1194,7 @@ lock_retry_remap:
 		tbh = bhs[i];
 		if (!tbh)
 			continue;
-		if (unlikely(test_set_buffer_locked(tbh)))
+		if (!trylock_buffer(tbh))
 			BUG();
 		/* The buffer dirty state is now irrelevant, just clean it. */
 		clear_buffer_dirty(tbh);
diff --git a/fs/ntfs/compress.c b/fs/ntfs/compress.c
index 33ff314cc50..9669541d011 100644
--- a/fs/ntfs/compress.c
+++ b/fs/ntfs/compress.c
@@ -665,7 +665,7 @@ lock_retry_remap:
 	for (i = 0; i < nr_bhs; i++) {
 		struct buffer_head *tbh = bhs[i];
 
-		if (unlikely(test_set_buffer_locked(tbh)))
+		if (!trylock_buffer(tbh))
 			continue;
 		if (unlikely(buffer_uptodate(tbh))) {
 			unlock_buffer(tbh);
diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c
index 790defb847e..17d32ca6bc3 100644
--- a/fs/ntfs/mft.c
+++ b/fs/ntfs/mft.c
@@ -586,7 +586,7 @@ int ntfs_sync_mft_mirror(ntfs_volume *vol, const unsigned long mft_no,
 		for (i_bhs = 0; i_bhs < nr_bhs; i_bhs++) {
 			struct buffer_head *tbh = bhs[i_bhs];
 
-			if (unlikely(test_set_buffer_locked(tbh)))
+			if (!trylock_buffer(tbh))
 				BUG();
 			BUG_ON(!buffer_uptodate(tbh));
 			clear_buffer_dirty(tbh);
@@ -779,7 +779,7 @@ int write_mft_record_nolock(ntfs_inode *ni, MFT_RECORD *m, int sync)
 	for (i_bhs = 0; i_bhs < nr_bhs; i_bhs++) {
 		struct buffer_head *tbh = bhs[i_bhs];
 
-		if (unlikely(test_set_buffer_locked(tbh)))
+		if (!trylock_buffer(tbh))
 			BUG();
 		BUG_ON(!buffer_uptodate(tbh));
 		clear_buffer_dirty(tbh);
diff --git a/fs/ntfs/namei.c b/fs/ntfs/namei.c
index e1781c8b165..9e8a95be7a1 100644
--- a/fs/ntfs/namei.c
+++ b/fs/ntfs/namei.c
@@ -174,7 +174,6 @@ static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent,
 	// TODO: Consider moving this lot to a separate function! (AIA)
 handle_name:
    {
-	struct dentry *real_dent, *new_dent;
 	MFT_RECORD *m;
 	ntfs_attr_search_ctx *ctx;
 	ntfs_inode *ni = NTFS_I(dent_inode);
@@ -255,93 +254,9 @@ handle_name:
 	}
 	nls_name.hash = full_name_hash(nls_name.name, nls_name.len);
 
-	/*
-	 * Note: No need for dent->d_lock lock as i_mutex is held on the
-	 * parent inode.
-	 */
-
-	/* Does a dentry matching the nls_name exist already? */
-	real_dent = d_lookup(dent->d_parent, &nls_name);
-	/* If not, create it now. */
-	if (!real_dent) {
-		real_dent = d_alloc(dent->d_parent, &nls_name);
-		kfree(nls_name.name);
-		if (!real_dent) {
-			err = -ENOMEM;
-			goto err_out;
-		}
-		new_dent = d_splice_alias(dent_inode, real_dent);
-		if (new_dent)
-			dput(real_dent);
-		else
-			new_dent = real_dent;
-		ntfs_debug("Done.  (Created new dentry.)");
-		return new_dent;
-	}
+	dent = d_add_ci(dent, dent_inode, &nls_name);
 	kfree(nls_name.name);
-	/* Matching dentry exists, check if it is negative. */
-	if (real_dent->d_inode) {
-		if (unlikely(real_dent->d_inode != dent_inode)) {
-			/* This can happen because bad inodes are unhashed. */
-			BUG_ON(!is_bad_inode(dent_inode));
-			BUG_ON(!is_bad_inode(real_dent->d_inode));
-		}
-		/*
-		 * Already have the inode and the dentry attached, decrement
-		 * the reference count to balance the ntfs_iget() we did
-		 * earlier on.  We found the dentry using d_lookup() so it
-		 * cannot be disconnected and thus we do not need to worry
-		 * about any NFS/disconnectedness issues here.
-		 */
-		iput(dent_inode);
-		ntfs_debug("Done.  (Already had inode and dentry.)");
-		return real_dent;
-	}
-	/*
-	 * Negative dentry: instantiate it unless the inode is a directory and
-	 * has a 'disconnected' dentry (i.e. IS_ROOT and DCACHE_DISCONNECTED),
-	 * in which case d_move() that in place of the found dentry.
-	 */
-	if (!S_ISDIR(dent_inode->i_mode)) {
-		/* Not a directory; everything is easy. */
-		d_instantiate(real_dent, dent_inode);
-		ntfs_debug("Done.  (Already had negative file dentry.)");
-		return real_dent;
-	}
-	spin_lock(&dcache_lock);
-	if (list_empty(&dent_inode->i_dentry)) {
-		/*
-		 * Directory without a 'disconnected' dentry; we need to do
-		 * d_instantiate() by hand because it takes dcache_lock which
-		 * we already hold.
-		 */
-		list_add(&real_dent->d_alias, &dent_inode->i_dentry);
-		real_dent->d_inode = dent_inode;
-		spin_unlock(&dcache_lock);
-		security_d_instantiate(real_dent, dent_inode);
-		ntfs_debug("Done.  (Already had negative directory dentry.)");
-		return real_dent;
-	}
-	/*
-	 * Directory with a 'disconnected' dentry; get a reference to the
-	 * 'disconnected' dentry.
-	 */
-	new_dent = list_entry(dent_inode->i_dentry.next, struct dentry,
-			d_alias);
-	dget_locked(new_dent);
-	spin_unlock(&dcache_lock);
-	/* Do security vodoo. */
-	security_d_instantiate(real_dent, dent_inode);
-	/* Move new_dent in place of real_dent. */
-	d_move(new_dent, real_dent);
-	/* Balance the ntfs_iget() we did above. */
-	iput(dent_inode);
-	/* Throw away real_dent. */
-	dput(real_dent);
-	/* Use new_dent as the actual dentry. */
-	ntfs_debug("Done.  (Already had negative, disconnected directory "
-			"dentry.)");
-	return new_dent;
+	return dent;
 
 eio_err_out:
 	ntfs_error(vol->sb, "Illegal file name attribute. Run chkdsk.");
diff --git a/fs/ntfs/usnjrnl.h b/fs/ntfs/usnjrnl.h
index 3a8af75351e..4087fbdac32 100644
--- a/fs/ntfs/usnjrnl.h
+++ b/fs/ntfs/usnjrnl.h
@@ -113,7 +113,7 @@ typedef struct {
  * Reason flags (32-bit).  Cumulative flags describing the change(s) to the
  * file since it was last opened.  I think the names speak for themselves but
  * if you disagree check out the descriptions in the Linux NTFS project NTFS
- * documentation: http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html
+ * documentation: http://www.linux-ntfs.org/
  */
 enum {
 	USN_REASON_DATA_OVERWRITE	= const_cpu_to_le32(0x00000001),
@@ -145,7 +145,7 @@ typedef le32 USN_REASON_FLAGS;
  * Source info flags (32-bit).  Information about the source of the change(s)
  * to the file.  For detailed descriptions of what these mean, see the Linux
  * NTFS project NTFS documentation:
- *	http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html
+ *	http://www.linux-ntfs.org/
  */
 enum {
 	USN_SOURCE_DATA_MANAGEMENT	  = const_cpu_to_le32(0x00000001),
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 1db080135c6..a53da146627 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -594,7 +594,7 @@ static int ocfs2_direct_IO_get_blocks(struct inode *inode, sector_t iblock,
 		goto bail;
 	}
 
-	if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno) {
+	if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno && create) {
 		ocfs2_error(inode->i_sb,
 			    "Inode %llu has a hole at block %llu\n",
 			    (unsigned long long)OCFS2_I(inode)->ip_blkno,
@@ -1073,12 +1073,15 @@ static void ocfs2_write_failure(struct inode *inode,
 	for(i = 0; i < wc->w_num_pages; i++) {
 		tmppage = wc->w_pages[i];
 
-		if (ocfs2_should_order_data(inode))
-			walk_page_buffers(wc->w_handle, page_buffers(tmppage),
-					  from, to, NULL,
-					  ocfs2_journal_dirty_data);
+		if (page_has_buffers(tmppage)) {
+			if (ocfs2_should_order_data(inode))
+				walk_page_buffers(wc->w_handle,
+						  page_buffers(tmppage),
+						  from, to, NULL,
+						  ocfs2_journal_dirty_data);
 
-		block_commit_write(tmppage, from, to);
+			block_commit_write(tmppage, from, to);
+		}
 	}
 }
 
@@ -1901,12 +1904,14 @@ int ocfs2_write_end_nolock(struct address_space *mapping,
 			to = PAGE_CACHE_SIZE;
 		}
 
-		if (ocfs2_should_order_data(inode))
-			walk_page_buffers(wc->w_handle, page_buffers(tmppage),
-					  from, to, NULL,
-					  ocfs2_journal_dirty_data);
-
-		block_commit_write(tmppage, from, to);
+		if (page_has_buffers(tmppage)) {
+			if (ocfs2_should_order_data(inode))
+				walk_page_buffers(wc->w_handle,
+						  page_buffers(tmppage),
+						  from, to, NULL,
+						  ocfs2_journal_dirty_data);
+			block_commit_write(tmppage, from, to);
+		}
 	}
 
 out_write_size:
diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c
index d8bfa0eb41b..52276c02f71 100644
--- a/fs/ocfs2/cluster/netdebug.c
+++ b/fs/ocfs2/cluster/netdebug.c
@@ -138,20 +138,20 @@ static int nst_seq_show(struct seq_file *seq, void *v)
 			   "  message id:   %d\n"
 			   "  message type: %u\n"
 			   "  message key:  0x%08x\n"
-			   "  sock acquiry: %lu.%lu\n"
-			   "  send start:   %lu.%lu\n"
-			   "  wait start:   %lu.%lu\n",
+			   "  sock acquiry: %lu.%ld\n"
+			   "  send start:   %lu.%ld\n"
+			   "  wait start:   %lu.%ld\n",
 			   nst, (unsigned long)nst->st_task->pid,
 			   (unsigned long)nst->st_task->tgid,
 			   nst->st_task->comm, nst->st_node,
 			   nst->st_sc, nst->st_id, nst->st_msg_type,
 			   nst->st_msg_key,
 			   nst->st_sock_time.tv_sec,
-			   (unsigned long)nst->st_sock_time.tv_usec,
+			   (long)nst->st_sock_time.tv_usec,
 			   nst->st_send_time.tv_sec,
-			   (unsigned long)nst->st_send_time.tv_usec,
+			   (long)nst->st_send_time.tv_usec,
 			   nst->st_status_time.tv_sec,
-			   nst->st_status_time.tv_usec);
+			   (long)nst->st_status_time.tv_usec);
 	}
 
 	spin_unlock(&o2net_debug_lock);
@@ -276,7 +276,7 @@ static void *sc_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	return sc; /* unused, just needs to be null when done */
 }
 
-#define TV_SEC_USEC(TV) TV.tv_sec, (unsigned long)TV.tv_usec
+#define TV_SEC_USEC(TV) TV.tv_sec, (long)TV.tv_usec
 
 static int sc_seq_show(struct seq_file *seq, void *v)
 {
@@ -309,12 +309,12 @@ static int sc_seq_show(struct seq_file *seq, void *v)
 			   "  remote node:     %s\n"
 			   "  page off:        %zu\n"
 			   "  handshake ok:    %u\n"
-			   "  timer:           %lu.%lu\n"
-			   "  data ready:      %lu.%lu\n"
-			   "  advance start:   %lu.%lu\n"
-			   "  advance stop:    %lu.%lu\n"
-			   "  func start:      %lu.%lu\n"
-			   "  func stop:       %lu.%lu\n"
+			   "  timer:           %lu.%ld\n"
+			   "  data ready:      %lu.%ld\n"
+			   "  advance start:   %lu.%ld\n"
+			   "  advance stop:    %lu.%ld\n"
+			   "  func start:      %lu.%ld\n"
+			   "  func stop:       %lu.%ld\n"
 			   "  func key:        %u\n"
 			   "  func type:       %u\n",
 			   sc,
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index a27d61581bd..2bcf706d9dd 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -143,8 +143,8 @@ static void o2net_sc_postpone_idle(struct o2net_sock_container *sc);
 static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc);
 
 #ifdef CONFIG_DEBUG_FS
-void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
-		    u32 msgkey, struct task_struct *task, u8 node)
+static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+			   u32 msgkey, struct task_struct *task, u8 node)
 {
 	INIT_LIST_HEAD(&nst->st_net_debug_item);
 	nst->st_task = task;
@@ -153,31 +153,61 @@ void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
 	nst->st_node = node;
 }
 
-void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
 {
 	do_gettimeofday(&nst->st_sock_time);
 }
 
-void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+static void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
 {
 	do_gettimeofday(&nst->st_send_time);
 }
 
-void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+static void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
 {
 	do_gettimeofday(&nst->st_status_time);
 }
 
-void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
 					 struct o2net_sock_container *sc)
 {
 	nst->st_sc = sc;
 }
 
-void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
+static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
 {
 	nst->st_id = msg_id;
 }
+
+#else  /* CONFIG_DEBUG_FS */
+
+static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+				  u32 msgkey, struct task_struct *task, u8 node)
+{
+}
+
+static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+{
+}
+
+static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+{
+}
+
+static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+{
+}
+
+static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+						struct o2net_sock_container *sc)
+{
+}
+
+static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
+					u32 msg_id)
+{
+}
+
 #endif /* CONFIG_DEBUG_FS */
 
 static inline int o2net_reconnect_delay(void)
diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h
index 18307ff81b7..8d58cfe410b 100644
--- a/fs/ocfs2/cluster/tcp_internal.h
+++ b/fs/ocfs2/cluster/tcp_internal.h
@@ -224,42 +224,10 @@ struct o2net_send_tracking {
 	struct timeval			st_send_time;
 	struct timeval			st_status_time;
 };
-
-void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
-		    u32 msgkey, struct task_struct *task, u8 node);
-void o2net_set_nst_sock_time(struct o2net_send_tracking *nst);
-void o2net_set_nst_send_time(struct o2net_send_tracking *nst);
-void o2net_set_nst_status_time(struct o2net_send_tracking *nst);
-void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
-				  struct o2net_sock_container *sc);
-void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id);
-
 #else
 struct o2net_send_tracking {
 	u32	dummy;
 };
-
-static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
-				  u32 msgkey, struct task_struct *task, u8 node)
-{
-}
-static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
-{
-}
-static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
-{
-}
-static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
-{
-}
-static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
-						struct o2net_sock_container *sc)
-{
-}
-static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
-					u32 msg_id)
-{
-}
 #endif	/* CONFIG_DEBUG_FS */
 
 #endif /* O2CLUSTER_TCP_INTERNAL_H */
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 8a187584808..9cce563fd62 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -1300,7 +1300,6 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 	di->i_size = cpu_to_le64(sb->s_blocksize);
 	di->i_ctime = di->i_mtime = cpu_to_le64(dir->i_ctime.tv_sec);
 	di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(dir->i_ctime.tv_nsec);
-	dir->i_blocks = ocfs2_inode_sector_count(dir);
 
 	/*
 	 * This should never fail as our extent list is empty and all
@@ -1310,9 +1309,15 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 				  NULL);
 	if (ret) {
 		mlog_errno(ret);
-		goto out;
+		goto out_commit;
 	}
 
+	/*
+	 * Set i_blocks after the extent insert for the most up to
+	 * date ip_clusters value.
+	 */
+	dir->i_blocks = ocfs2_inode_sector_count(dir);
+
 	ret = ocfs2_journal_dirty(handle, di_bh);
 	if (ret) {
 		mlog_errno(ret);
@@ -1336,7 +1341,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 					  len, 0, NULL);
 		if (ret) {
 			mlog_errno(ret);
-			goto out;
+			goto out_commit;
 		}
 	}
 
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index be2dd95d3a1..ec2ed15c3da 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1766,8 +1766,8 @@ out_inode_unlock:
 out_rw_unlock:
 	ocfs2_rw_unlock(inode, 1);
 
-	mutex_unlock(&inode->i_mutex);
 out:
+	mutex_unlock(&inode->i_mutex);
 	return ret;
 }
 
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index a8c19cb3cfd..c47bc2a809c 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -57,7 +57,7 @@ static int __ocfs2_recovery_thread(void *arg);
 static int ocfs2_commit_cache(struct ocfs2_super *osb);
 static int ocfs2_wait_on_mount(struct ocfs2_super *osb);
 static int ocfs2_journal_toggle_dirty(struct ocfs2_super *osb,
-				      int dirty);
+				      int dirty, int replayed);
 static int ocfs2_trylock_journal(struct ocfs2_super *osb,
 				 int slot_num);
 static int ocfs2_recover_orphans(struct ocfs2_super *osb,
@@ -562,8 +562,18 @@ done:
 	return status;
 }
 
+static void ocfs2_bump_recovery_generation(struct ocfs2_dinode *di)
+{
+	le32_add_cpu(&(di->id1.journal1.ij_recovery_generation), 1);
+}
+
+static u32 ocfs2_get_recovery_generation(struct ocfs2_dinode *di)
+{
+	return le32_to_cpu(di->id1.journal1.ij_recovery_generation);
+}
+
 static int ocfs2_journal_toggle_dirty(struct ocfs2_super *osb,
-				      int dirty)
+				      int dirty, int replayed)
 {
 	int status;
 	unsigned int flags;
@@ -593,6 +603,9 @@ static int ocfs2_journal_toggle_dirty(struct ocfs2_super *osb,
 		flags &= ~OCFS2_JOURNAL_DIRTY_FL;
 	fe->id1.journal1.ij_flags = cpu_to_le32(flags);
 
+	if (replayed)
+		ocfs2_bump_recovery_generation(fe);
+
 	status = ocfs2_write_block(osb, bh, journal->j_inode);
 	if (status < 0)
 		mlog_errno(status);
@@ -667,7 +680,7 @@ void ocfs2_journal_shutdown(struct ocfs2_super *osb)
 		 * Do not toggle if flush was unsuccessful otherwise
 		 * will leave dirty metadata in a "clean" journal
 		 */
-		status = ocfs2_journal_toggle_dirty(osb, 0);
+		status = ocfs2_journal_toggle_dirty(osb, 0, 0);
 		if (status < 0)
 			mlog_errno(status);
 	}
@@ -710,7 +723,7 @@ static void ocfs2_clear_journal_error(struct super_block *sb,
 	}
 }
 
-int ocfs2_journal_load(struct ocfs2_journal *journal, int local)
+int ocfs2_journal_load(struct ocfs2_journal *journal, int local, int replayed)
 {
 	int status = 0;
 	struct ocfs2_super *osb;
@@ -729,7 +742,7 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int local)
 
 	ocfs2_clear_journal_error(osb->sb, journal->j_journal, osb->slot_num);
 
-	status = ocfs2_journal_toggle_dirty(osb, 1);
+	status = ocfs2_journal_toggle_dirty(osb, 1, replayed);
 	if (status < 0) {
 		mlog_errno(status);
 		goto done;
@@ -771,7 +784,7 @@ int ocfs2_journal_wipe(struct ocfs2_journal *journal, int full)
 		goto bail;
 	}
 
-	status = ocfs2_journal_toggle_dirty(journal->j_osb, 0);
+	status = ocfs2_journal_toggle_dirty(journal->j_osb, 0, 0);
 	if (status < 0)
 		mlog_errno(status);
 
@@ -1034,6 +1047,12 @@ restart:
 	spin_unlock(&osb->osb_lock);
 	mlog(0, "All nodes recovered\n");
 
+	/* Refresh all journal recovery generations from disk */
+	status = ocfs2_check_journals_nolocks(osb);
+	status = (status == -EROFS) ? 0 : status;
+	if (status < 0)
+		mlog_errno(status);
+
 	ocfs2_super_unlock(osb, 1);
 
 	/* We always run recovery on our own orphan dir - the dead
@@ -1096,6 +1115,42 @@ out:
 	mlog_exit_void();
 }
 
+static int ocfs2_read_journal_inode(struct ocfs2_super *osb,
+				    int slot_num,
+				    struct buffer_head **bh,
+				    struct inode **ret_inode)
+{
+	int status = -EACCES;
+	struct inode *inode = NULL;
+
+	BUG_ON(slot_num >= osb->max_slots);
+
+	inode = ocfs2_get_system_file_inode(osb, JOURNAL_SYSTEM_INODE,
+					    slot_num);
+	if (!inode || is_bad_inode(inode)) {
+		mlog_errno(status);
+		goto bail;
+	}
+	SET_INODE_JOURNAL(inode);
+
+	status = ocfs2_read_block(osb, OCFS2_I(inode)->ip_blkno, bh, 0, inode);
+	if (status < 0) {
+		mlog_errno(status);
+		goto bail;
+	}
+
+	status = 0;
+
+bail:
+	if (inode) {
+		if (status || !ret_inode)
+			iput(inode);
+		else
+			*ret_inode = inode;
+	}
+	return status;
+}
+
 /* Does the actual journal replay and marks the journal inode as
  * clean. Will only replay if the journal inode is marked dirty. */
 static int ocfs2_replay_journal(struct ocfs2_super *osb,
@@ -1109,22 +1164,36 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb,
 	struct ocfs2_dinode *fe;
 	journal_t *journal = NULL;
 	struct buffer_head *bh = NULL;
+	u32 slot_reco_gen;
 
-	inode = ocfs2_get_system_file_inode(osb, JOURNAL_SYSTEM_INODE,
-					    slot_num);
-	if (inode == NULL) {
-		status = -EACCES;
+	status = ocfs2_read_journal_inode(osb, slot_num, &bh, &inode);
+	if (status) {
 		mlog_errno(status);
 		goto done;
 	}
-	if (is_bad_inode(inode)) {
-		status = -EACCES;
-		iput(inode);
-		inode = NULL;
-		mlog_errno(status);
+
+	fe = (struct ocfs2_dinode *)bh->b_data;
+	slot_reco_gen = ocfs2_get_recovery_generation(fe);
+	brelse(bh);
+	bh = NULL;
+
+	/*
+	 * As the fs recovery is asynchronous, there is a small chance that
+	 * another node mounted (and recovered) the slot before the recovery
+	 * thread could get the lock. To handle that, we dirty read the journal
+	 * inode for that slot to get the recovery generation. If it is
+	 * different than what we expected, the slot has been recovered.
+	 * If not, it needs recovery.
+	 */
+	if (osb->slot_recovery_generations[slot_num] != slot_reco_gen) {
+		mlog(0, "Slot %u already recovered (old/new=%u/%u)\n", slot_num,
+		     osb->slot_recovery_generations[slot_num], slot_reco_gen);
+		osb->slot_recovery_generations[slot_num] = slot_reco_gen;
+		status = -EBUSY;
 		goto done;
 	}
-	SET_INODE_JOURNAL(inode);
+
+	/* Continue with recovery as the journal has not yet been recovered */
 
 	status = ocfs2_inode_lock_full(inode, &bh, 1, OCFS2_META_LOCK_RECOVERY);
 	if (status < 0) {
@@ -1138,9 +1207,12 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb,
 	fe = (struct ocfs2_dinode *) bh->b_data;
 
 	flags = le32_to_cpu(fe->id1.journal1.ij_flags);
+	slot_reco_gen = ocfs2_get_recovery_generation(fe);
 
 	if (!(flags & OCFS2_JOURNAL_DIRTY_FL)) {
 		mlog(0, "No recovery required for node %d\n", node_num);
+		/* Refresh recovery generation for the slot */
+		osb->slot_recovery_generations[slot_num] = slot_reco_gen;
 		goto done;
 	}
 
@@ -1188,6 +1260,11 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb,
 	flags &= ~OCFS2_JOURNAL_DIRTY_FL;
 	fe->id1.journal1.ij_flags = cpu_to_le32(flags);
 
+	/* Increment recovery generation to indicate successful recovery */
+	ocfs2_bump_recovery_generation(fe);
+	osb->slot_recovery_generations[slot_num] =
+					ocfs2_get_recovery_generation(fe);
+
 	status = ocfs2_write_block(osb, bh, inode);
 	if (status < 0)
 		mlog_errno(status);
@@ -1252,6 +1329,13 @@ static int ocfs2_recover_node(struct ocfs2_super *osb,
 
 	status = ocfs2_replay_journal(osb, node_num, slot_num);
 	if (status < 0) {
+		if (status == -EBUSY) {
+			mlog(0, "Skipping recovery for slot %u (node %u) "
+			     "as another node has recovered it\n", slot_num,
+			     node_num);
+			status = 0;
+			goto done;
+		}
 		mlog_errno(status);
 		goto done;
 	}
@@ -1334,21 +1418,46 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb)
 {
 	unsigned int node_num;
 	int status, i;
+	u32 gen;
+	struct buffer_head *bh = NULL;
+	struct ocfs2_dinode *di;
 
 	/* This is called with the super block cluster lock, so we
 	 * know that the slot map can't change underneath us. */
 
-	spin_lock(&osb->osb_lock);
 	for (i = 0; i < osb->max_slots; i++) {
-		if (i == osb->slot_num)
+		/* Read journal inode to get the recovery generation */
+		status = ocfs2_read_journal_inode(osb, i, &bh, NULL);
+		if (status) {
+			mlog_errno(status);
+			goto bail;
+		}
+		di = (struct ocfs2_dinode *)bh->b_data;
+		gen = ocfs2_get_recovery_generation(di);
+		brelse(bh);
+		bh = NULL;
+
+		spin_lock(&osb->osb_lock);
+		osb->slot_recovery_generations[i] = gen;
+
+		mlog(0, "Slot %u recovery generation is %u\n", i,
+		     osb->slot_recovery_generations[i]);
+
+		if (i == osb->slot_num) {
+			spin_unlock(&osb->osb_lock);
 			continue;
+		}
 
 		status = ocfs2_slot_to_node_num_locked(osb, i, &node_num);
-		if (status == -ENOENT)
+		if (status == -ENOENT) {
+			spin_unlock(&osb->osb_lock);
 			continue;
+		}
 
-		if (__ocfs2_recovery_map_test(osb, node_num))
+		if (__ocfs2_recovery_map_test(osb, node_num)) {
+			spin_unlock(&osb->osb_lock);
 			continue;
+		}
 		spin_unlock(&osb->osb_lock);
 
 		/* Ok, we have a slot occupied by another node which
@@ -1364,10 +1473,7 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb)
 			mlog_errno(status);
 			goto bail;
 		}
-
-		spin_lock(&osb->osb_lock);
 	}
-	spin_unlock(&osb->osb_lock);
 
 	status = 0;
 bail:
@@ -1603,49 +1709,41 @@ static int ocfs2_commit_thread(void *arg)
 	return 0;
 }
 
-/* Look for a dirty journal without taking any cluster locks. Used for
- * hard readonly access to determine whether the file system journals
- * require recovery. */
+/* Reads all the journal inodes without taking any cluster locks. Used
+ * for hard readonly access to determine whether any journal requires
+ * recovery. Also used to refresh the recovery generation numbers after
+ * a journal has been recovered by another node.
+ */
 int ocfs2_check_journals_nolocks(struct ocfs2_super *osb)
 {
 	int ret = 0;
 	unsigned int slot;
-	struct buffer_head *di_bh;
+	struct buffer_head *di_bh = NULL;
 	struct ocfs2_dinode *di;
-	struct inode *journal = NULL;
+	int journal_dirty = 0;
 
 	for(slot = 0; slot < osb->max_slots; slot++) {
-		journal = ocfs2_get_system_file_inode(osb,
-						      JOURNAL_SYSTEM_INODE,
-						      slot);
-		if (!journal || is_bad_inode(journal)) {
-			ret = -EACCES;
-			mlog_errno(ret);
-			goto out;
-		}
-
-		di_bh = NULL;
-		ret = ocfs2_read_block(osb, OCFS2_I(journal)->ip_blkno, &di_bh,
-				       0, journal);
-		if (ret < 0) {
+		ret = ocfs2_read_journal_inode(osb, slot, &di_bh, NULL);
+		if (ret) {
 			mlog_errno(ret);
 			goto out;
 		}
 
 		di = (struct ocfs2_dinode *) di_bh->b_data;
 
+		osb->slot_recovery_generations[slot] =
+					ocfs2_get_recovery_generation(di);
+
 		if (le32_to_cpu(di->id1.journal1.ij_flags) &
 		    OCFS2_JOURNAL_DIRTY_FL)
-			ret = -EROFS;
+			journal_dirty = 1;
 
 		brelse(di_bh);
-		if (ret)
-			break;
+		di_bh = NULL;
 	}
 
 out:
-	if (journal)
-		iput(journal);
-
+	if (journal_dirty)
+		ret = -EROFS;
 	return ret;
 }
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index db82be2532e..2178ebffa05 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -161,7 +161,8 @@ int    ocfs2_journal_init(struct ocfs2_journal *journal,
 void   ocfs2_journal_shutdown(struct ocfs2_super *osb);
 int    ocfs2_journal_wipe(struct ocfs2_journal *journal,
 			  int full);
-int    ocfs2_journal_load(struct ocfs2_journal *journal, int local);
+int    ocfs2_journal_load(struct ocfs2_journal *journal, int local,
+			  int replayed);
 int    ocfs2_check_journals_nolocks(struct ocfs2_super *osb);
 void   ocfs2_recovery_thread(struct ocfs2_super *osb,
 			     int node_num);
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 1cb814be8ef..7f625f2b111 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -204,6 +204,8 @@ struct ocfs2_super
 
 	struct ocfs2_slot_info *slot_info;
 
+	u32 *slot_recovery_generations;
+
 	spinlock_t node_map_lock;
 
 	u64 root_blkno;
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 3f194517762..4f619850ccf 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -660,7 +660,10 @@ struct ocfs2_dinode {
 		struct {		/* Info for journal system
 					   inodes */
 			__le32 ij_flags;	/* Mounted, version, etc. */
-			__le32 ij_pad;
+			__le32 ij_recovery_generation; /* Incremented when the
+							  journal is recovered
+							  after an unclean
+							  shutdown */
 		} journal1;
 	} id1;				/* Inode type dependant 1 */
 /*C0*/	union {
diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c
index 10e149ae5e3..07f348b8d72 100644
--- a/fs/ocfs2/stackglue.c
+++ b/fs/ocfs2/stackglue.c
@@ -97,13 +97,14 @@ static int ocfs2_stack_driver_request(const char *stack_name,
 		goto out;
 	}
 
-	/* Ok, the stack is pinned */
-	p->sp_count++;
 	active_stack = p;
-
 	rc = 0;
 
 out:
+	/* If we found it, pin it */
+	if (!rc)
+		active_stack->sp_count++;
+
 	spin_unlock(&ocfs2_stack_lock);
 	return rc;
 }
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 2560b33889a..88255d3f52b 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1442,6 +1442,15 @@ static int ocfs2_initialize_super(struct super_block *sb,
 	}
 	mlog(0, "max_slots for this device: %u\n", osb->max_slots);
 
+	osb->slot_recovery_generations =
+		kcalloc(osb->max_slots, sizeof(*osb->slot_recovery_generations),
+			GFP_KERNEL);
+	if (!osb->slot_recovery_generations) {
+		status = -ENOMEM;
+		mlog_errno(status);
+		goto bail;
+	}
+
 	init_waitqueue_head(&osb->osb_wipe_event);
 	osb->osb_orphan_wipes = kcalloc(osb->max_slots,
 					sizeof(*osb->osb_orphan_wipes),
@@ -1703,7 +1712,7 @@ static int ocfs2_check_volume(struct ocfs2_super *osb)
 	local = ocfs2_mount_local(osb);
 
 	/* will play back anything left in the journal. */
-	status = ocfs2_journal_load(osb->journal, local);
+	status = ocfs2_journal_load(osb->journal, local, dirty);
 	if (status < 0) {
 		mlog(ML_ERROR, "ocfs2 journal load failed! %d\n", status);
 		goto finally;
@@ -1768,6 +1777,7 @@ static void ocfs2_delete_osb(struct ocfs2_super *osb)
 	ocfs2_free_slot_info(osb);
 
 	kfree(osb->osb_orphan_wipes);
+	kfree(osb->slot_recovery_generations);
 	/* FIXME
 	 * This belongs in journal shutdown, but because we have to
 	 * allocate osb->journal at the start of ocfs2_initalize_osb(),
diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c
index dc75f22be3f..e1c0ec0ae98 100644
--- a/fs/omfs/bitmap.c
+++ b/fs/omfs/bitmap.c
@@ -71,10 +71,10 @@ static int set_run(struct super_block *sb, int map,
 		}
 		if (set) {
 			set_bit(bit, sbi->s_imap[map]);
-			set_bit(bit, (long *) bh->b_data);
+			set_bit(bit, (unsigned long *)bh->b_data);
 		} else {
 			clear_bit(bit, sbi->s_imap[map]);
-			clear_bit(bit, (long *) bh->b_data);
+			clear_bit(bit, (unsigned long *)bh->b_data);
 		}
 	}
 	mark_buffer_dirty(bh);
@@ -92,7 +92,7 @@ int omfs_allocate_block(struct super_block *sb, u64 block)
 	struct buffer_head *bh;
 	struct omfs_sb_info *sbi = OMFS_SB(sb);
 	int bits_per_entry = 8 * sb->s_blocksize;
-	int map, bit;
+	unsigned int map, bit;
 	int ret = 0;
 	u64 tmp;
 
@@ -109,7 +109,7 @@ int omfs_allocate_block(struct super_block *sb, u64 block)
 		if (!bh)
 			goto out;
 
-		set_bit(bit, (long *) bh->b_data);
+		set_bit(bit, (unsigned long *)bh->b_data);
 		mark_buffer_dirty(bh);
 		brelse(bh);
 	}
@@ -176,7 +176,8 @@ int omfs_clear_range(struct super_block *sb, u64 block, int count)
 	struct omfs_sb_info *sbi = OMFS_SB(sb);
 	int bits_per_entry = 8 * sb->s_blocksize;
 	u64 tmp;
-	int map, bit, ret;
+	unsigned int map, bit;
+	int ret;
 
 	tmp = block;
 	bit = do_div(tmp, bits_per_entry);
diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
index 05a5bc31e4b..c0757e99887 100644
--- a/fs/omfs/dir.c
+++ b/fs/omfs/dir.c
@@ -104,7 +104,7 @@ int omfs_make_empty(struct inode *inode, struct super_block *sb)
 
 	oi = (struct omfs_inode *) bh->b_data;
 	oi->i_head.h_self = cpu_to_be64(inode->i_ino);
-	oi->i_sibling = ~0ULL;
+	oi->i_sibling = ~cpu_to_be64(0ULL);
 
 	mark_buffer_dirty(bh);
 	brelse(bh);
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 66e01fae438..834b2331f6b 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -26,15 +26,22 @@ static int omfs_sync_file(struct file *file, struct dentry *dentry,
 	return err ? -EIO : 0;
 }
 
+static u32 omfs_max_extents(struct omfs_sb_info *sbi, int offset)
+{
+	return (sbi->s_sys_blocksize - offset -
+		sizeof(struct omfs_extent)) /
+		sizeof(struct omfs_extent_entry) + 1;
+}
+
 void omfs_make_empty_table(struct buffer_head *bh, int offset)
 {
 	struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset];
 
-	oe->e_next = ~0ULL;
+	oe->e_next = ~cpu_to_be64(0ULL);
 	oe->e_extent_count = cpu_to_be32(1),
 	oe->e_fill = cpu_to_be32(0x22),
-	oe->e_entry.e_cluster = ~0ULL;
-	oe->e_entry.e_blocks = ~0ULL;
+	oe->e_entry.e_cluster = ~cpu_to_be64(0ULL);
+	oe->e_entry.e_blocks = ~cpu_to_be64(0ULL);
 }
 
 int omfs_shrink_inode(struct inode *inode)
@@ -45,6 +52,7 @@ int omfs_shrink_inode(struct inode *inode)
 	struct buffer_head *bh;
 	u64 next, last;
 	u32 extent_count;
+	u32 max_extents;
 	int ret;
 
 	/* traverse extent table, freeing each entry that is greater
@@ -62,15 +70,18 @@ int omfs_shrink_inode(struct inode *inode)
 		goto out;
 
 	oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]);
+	max_extents = omfs_max_extents(sbi, OMFS_EXTENT_START);
 
 	for (;;) {
 
-		if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next)) {
-			brelse(bh);
-			goto out;
-		}
+		if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next))
+			goto out_brelse;
 
 		extent_count = be32_to_cpu(oe->e_extent_count);
+
+		if (extent_count > max_extents)
+			goto out_brelse;
+
 		last = next;
 		next = be64_to_cpu(oe->e_next);
 		entry = &oe->e_entry;
@@ -98,10 +109,14 @@ int omfs_shrink_inode(struct inode *inode)
 		if (!bh)
 			goto out;
 		oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
+		max_extents = omfs_max_extents(sbi, OMFS_EXTENT_CONT);
 	}
 	ret = 0;
 out:
 	return ret;
+out_brelse:
+	brelse(bh);
+	return ret;
 }
 
 static void omfs_truncate(struct inode *inode)
@@ -154,9 +169,7 @@ static int omfs_grow_extent(struct inode *inode, struct omfs_extent *oe,
 			goto out;
 		}
 	}
-	max_count = (sbi->s_sys_blocksize - OMFS_EXTENT_START -
-		sizeof(struct omfs_extent)) /
-		sizeof(struct omfs_extent_entry) + 1;
+	max_count = omfs_max_extents(sbi, OMFS_EXTENT_START);
 
 	/* TODO: add a continuation block here */
 	if (be32_to_cpu(oe->e_extent_count) > max_count-1)
@@ -225,6 +238,7 @@ static int omfs_get_block(struct inode *inode, sector_t block,
 	sector_t next, offset;
 	int ret;
 	u64 new_block;
+	u32 max_extents;
 	int extent_count;
 	struct omfs_extent *oe;
 	struct omfs_extent_entry *entry;
@@ -238,6 +252,7 @@ static int omfs_get_block(struct inode *inode, sector_t block,
 		goto out;
 
 	oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]);
+	max_extents = omfs_max_extents(sbi, OMFS_EXTENT_START);
 	next = inode->i_ino;
 
 	for (;;) {
@@ -249,6 +264,9 @@ static int omfs_get_block(struct inode *inode, sector_t block,
 		next = be64_to_cpu(oe->e_next);
 		entry = &oe->e_entry;
 
+		if (extent_count > max_extents)
+			goto out_brelse;
+
 		offset = find_block(inode, entry, block, extent_count, &remain);
 		if (offset > 0) {
 			ret = 0;
@@ -266,6 +284,7 @@ static int omfs_get_block(struct inode *inode, sector_t block,
 		if (!bh)
 			goto out;
 		oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
+		max_extents = omfs_max_extents(sbi, OMFS_EXTENT_CONT);
 	}
 	if (create) {
 		ret = omfs_grow_extent(inode, oe, &new_block);
diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c
index d865f553543..d29047b1b9b 100644
--- a/fs/omfs/inode.c
+++ b/fs/omfs/inode.c
@@ -232,8 +232,7 @@ struct inode *omfs_iget(struct super_block *sb, ino_t ino)
 		inode->i_mode = S_IFDIR | (S_IRWXUGO & ~sbi->s_dmask);
 		inode->i_op = &omfs_dir_inops;
 		inode->i_fop = &omfs_dir_operations;
-		inode->i_size = be32_to_cpu(oi->i_head.h_body_size) +
-			sizeof(struct omfs_header);
+		inode->i_size = sbi->s_sys_blocksize;
 		inc_nlink(inode);
 		break;
 	case OMFS_FILE:
@@ -492,7 +491,8 @@ static int omfs_fill_super(struct super_block *sb, void *data, int silent)
 	if (sbi->s_num_blocks != be64_to_cpu(omfs_rb->r_num_blocks)) {
 		printk(KERN_ERR "omfs: block count discrepancy between "
 			"super and root blocks (%llx, %llx)\n",
-			sbi->s_num_blocks, be64_to_cpu(omfs_rb->r_num_blocks));
+			(unsigned long long)sbi->s_num_blocks,
+			(unsigned long long)be64_to_cpu(omfs_rb->r_num_blocks));
 		goto out_brelse_bh2;
 	}
 
diff --git a/fs/open.c b/fs/open.c
index 52647be277a..07da9359481 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -963,62 +963,6 @@ struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags)
 }
 EXPORT_SYMBOL(dentry_open);
 
-/*
- * Find an empty file descriptor entry, and mark it busy.
- */
-int get_unused_fd_flags(int flags)
-{
-	struct files_struct * files = current->files;
-	int fd, error;
-	struct fdtable *fdt;
-
-	spin_lock(&files->file_lock);
-
-repeat:
-	fdt = files_fdtable(files);
-	fd = find_next_zero_bit(fdt->open_fds->fds_bits, fdt->max_fds,
-				files->next_fd);
-
-	/* Do we need to expand the fd array or fd set?  */
-	error = expand_files(files, fd);
-	if (error < 0)
-		goto out;
-
-	if (error) {
-		/*
-	 	 * If we needed to expand the fs array we
-		 * might have blocked - try again.
-		 */
-		goto repeat;
-	}
-
-	FD_SET(fd, fdt->open_fds);
-	if (flags & O_CLOEXEC)
-		FD_SET(fd, fdt->close_on_exec);
-	else
-		FD_CLR(fd, fdt->close_on_exec);
-	files->next_fd = fd + 1;
-#if 1
-	/* Sanity check */
-	if (fdt->fd[fd] != NULL) {
-		printk(KERN_WARNING "get_unused_fd: slot %d not NULL!\n", fd);
-		fdt->fd[fd] = NULL;
-	}
-#endif
-	error = fd;
-
-out:
-	spin_unlock(&files->file_lock);
-	return error;
-}
-
-int get_unused_fd(void)
-{
-	return get_unused_fd_flags(0);
-}
-
-EXPORT_SYMBOL(get_unused_fd);
-
 static void __put_unused_fd(struct files_struct *files, unsigned int fd)
 {
 	struct fdtable *fdt = files_fdtable(files);
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 7d6b34e201d..ecc3330972e 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -499,9 +499,9 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 		if (!size)
 			continue;
 		if (from + size > get_capacity(disk)) {
-			printk(KERN_ERR " %s: p%d exceeds device capacity\n",
+			printk(KERN_WARNING
+				"%s: p%d exceeds device capacity\n",
 				disk->disk_name, p);
-			continue;
 		}
 		res = add_partition(disk, p, from, size, state->parts[p].flags);
 		if (res) {
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 0d6eb33597c..71c9be59c9c 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -337,65 +337,6 @@ int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
 	return 0;
 }
 
-/*
- * Use precise platform statistics if available:
- */
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-static cputime_t task_utime(struct task_struct *p)
-{
-	return p->utime;
-}
-
-static cputime_t task_stime(struct task_struct *p)
-{
-	return p->stime;
-}
-#else
-static cputime_t task_utime(struct task_struct *p)
-{
-	clock_t utime = cputime_to_clock_t(p->utime),
-		total = utime + cputime_to_clock_t(p->stime);
-	u64 temp;
-
-	/*
-	 * Use CFS's precise accounting:
-	 */
-	temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
-
-	if (total) {
-		temp *= utime;
-		do_div(temp, total);
-	}
-	utime = (clock_t)temp;
-
-	p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
-	return p->prev_utime;
-}
-
-static cputime_t task_stime(struct task_struct *p)
-{
-	clock_t stime;
-
-	/*
-	 * Use CFS's precise accounting. (we subtract utime from
-	 * the total, to make sure the total observed by userspace
-	 * grows monotonically - apps rely on that):
-	 */
-	stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
-			cputime_to_clock_t(task_utime(p));
-
-	if (stime >= 0)
-		p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
-
-	return p->prev_stime;
-}
-#endif
-
-static cputime_t task_gtime(struct task_struct *p)
-{
-	return p->gtime;
-}
-
 static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
 			struct pid *pid, struct task_struct *task, int whole)
 {
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 01ed610f9b8..a28840b11b8 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2423,10 +2423,13 @@ static int do_io_accounting(struct task_struct *task, char *buffer, int whole)
 			"read_bytes: %llu\n"
 			"write_bytes: %llu\n"
 			"cancelled_write_bytes: %llu\n",
-			acct.rchar, acct.wchar,
-			acct.syscr, acct.syscw,
-			acct.read_bytes, acct.write_bytes,
-			acct.cancelled_write_bytes);
+			(unsigned long long)acct.rchar,
+			(unsigned long long)acct.wchar,
+			(unsigned long long)acct.syscr,
+			(unsigned long long)acct.syscw,
+			(unsigned long long)acct.read_bytes,
+			(unsigned long long)acct.write_bytes,
+			(unsigned long long)acct.cancelled_write_bytes);
 }
 
 static int proc_tid_io_accounting(struct task_struct *task, char *buffer)
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index cb4096cc3fb..7821589a17d 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -300,10 +300,10 @@ out:
 	return rtn;
 }
 
-static DEFINE_IDR(proc_inum_idr);
+static DEFINE_IDA(proc_inum_ida);
 static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */
 
-#define PROC_DYNAMIC_FIRST 0xF0000000UL
+#define PROC_DYNAMIC_FIRST 0xF0000000U
 
 /*
  * Return an inode number between PROC_DYNAMIC_FIRST and
@@ -311,36 +311,34 @@ static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */
  */
 static unsigned int get_inode_number(void)
 {
-	int i, inum = 0;
+	unsigned int i;
 	int error;
 
 retry:
-	if (idr_pre_get(&proc_inum_idr, GFP_KERNEL) == 0)
+	if (ida_pre_get(&proc_inum_ida, GFP_KERNEL) == 0)
 		return 0;
 
 	spin_lock(&proc_inum_lock);
-	error = idr_get_new(&proc_inum_idr, NULL, &i);
+	error = ida_get_new(&proc_inum_ida, &i);
 	spin_unlock(&proc_inum_lock);
 	if (error == -EAGAIN)
 		goto retry;
 	else if (error)
 		return 0;
 
-	inum = (i & MAX_ID_MASK) + PROC_DYNAMIC_FIRST;
-
-	/* inum will never be more than 0xf0ffffff, so no check
-	 * for overflow.
-	 */
-
-	return inum;
+	if (i > UINT_MAX - PROC_DYNAMIC_FIRST) {
+		spin_lock(&proc_inum_lock);
+		ida_remove(&proc_inum_ida, i);
+		spin_unlock(&proc_inum_lock);
+		return 0;
+	}
+	return PROC_DYNAMIC_FIRST + i;
 }
 
 static void release_inode_number(unsigned int inum)
 {
-	int id = (inum - PROC_DYNAMIC_FIRST) | ~MAX_ID_MASK;
-
 	spin_lock(&proc_inum_lock);
-	idr_remove(&proc_inum_idr, id);
+	ida_remove(&proc_inum_ida, inum - PROC_DYNAMIC_FIRST);
 	spin_unlock(&proc_inum_lock);
 }
 
@@ -549,8 +547,8 @@ static int proc_register(struct proc_dir_entry * dir, struct proc_dir_entry * dp
 
 	for (tmp = dir->subdir; tmp; tmp = tmp->next)
 		if (strcmp(tmp->name, dp->name) == 0) {
-			printk(KERN_WARNING "proc_dir_entry '%s' already "
-					"registered\n", dp->name);
+			printk(KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
+				dir->name, dp->name);
 			dump_stack();
 			break;
 		}
diff --git a/fs/proc/nommu.c b/fs/proc/nommu.c
index 79ecd281d2c..3f87d263294 100644
--- a/fs/proc/nommu.c
+++ b/fs/proc/nommu.c
@@ -52,14 +52,14 @@ int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma)
 	}
 
 	seq_printf(m,
-		   "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+		   "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
 		   vma->vm_start,
 		   vma->vm_end,
 		   flags & VM_READ ? 'r' : '-',
 		   flags & VM_WRITE ? 'w' : '-',
 		   flags & VM_EXEC ? 'x' : '-',
 		   flags & VM_MAYSHARE ? flags & VM_SHARED ? 'S' : 's' : 'p',
-		   vma->vm_pgoff << PAGE_SHIFT,
+		   ((loff_t)vma->vm_pgoff) << PAGE_SHIFT,
 		   MAJOR(dev), MINOR(dev), ino, &len);
 
 	if (file) {
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index ded96986296..29e20c6b1f7 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -24,6 +24,7 @@
 #include <linux/tty.h>
 #include <linux/string.h>
 #include <linux/mman.h>
+#include <linux/quicklist.h>
 #include <linux/proc_fs.h>
 #include <linux/ioport.h>
 #include <linux/mm.h>
@@ -182,6 +183,9 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		"SReclaimable: %8lu kB\n"
 		"SUnreclaim:   %8lu kB\n"
 		"PageTables:   %8lu kB\n"
+#ifdef CONFIG_QUICKLIST
+		"Quicklists:   %8lu kB\n"
+#endif
 		"NFS_Unstable: %8lu kB\n"
 		"Bounce:       %8lu kB\n"
 		"WritebackTmp: %8lu kB\n"
@@ -214,6 +218,9 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		K(global_page_state(NR_SLAB_RECLAIMABLE)),
 		K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
 		K(global_page_state(NR_PAGETABLE)),
+#ifdef CONFIG_QUICKLIST
+		K(quicklist_total_size()),
+#endif
 		K(global_page_state(NR_UNSTABLE_NFS)),
 		K(global_page_state(NR_BOUNCE)),
 		K(global_page_state(NR_WRITEBACK_TEMP)),
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 7546a918f79..73d1891ee62 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -219,14 +219,14 @@ static int show_map(struct seq_file *m, void *v)
 		ino = inode->i_ino;
 	}
 
-	seq_printf(m, "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+	seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
 			vma->vm_start,
 			vma->vm_end,
 			flags & VM_READ ? 'r' : '-',
 			flags & VM_WRITE ? 'w' : '-',
 			flags & VM_EXEC ? 'x' : '-',
 			flags & VM_MAYSHARE ? 's' : 'p',
-			vma->vm_pgoff << PAGE_SHIFT,
+			((loff_t)vma->vm_pgoff) << PAGE_SHIFT,
 			MAJOR(dev), MINOR(dev), ino, &len);
 
 	/*
diff --git a/fs/readdir.c b/fs/readdir.c
index 4e026e5407f..93a7559bbfd 100644
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -80,8 +80,10 @@ static int fillonedir(void * __buf, const char * name, int namlen, loff_t offset
 	if (buf->result)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->result = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	buf->result++;
 	dirent = buf->dirent;
 	if (!access_ok(VERIFY_WRITE, dirent,
@@ -155,8 +157,10 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	dirent = buf->previous;
 	if (dirent) {
 		if (__put_user(offset, &dirent->d_off))
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 192269698a8..5699171212a 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -2435,7 +2435,7 @@ static int reiserfs_write_full_page(struct page *page,
 		if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) {
 			lock_buffer(bh);
 		} else {
-			if (test_set_buffer_locked(bh)) {
+			if (!trylock_buffer(bh)) {
 				redirty_page_for_writepage(wbc, page);
 				continue;
 			}
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index c8f60ee183b..c21df71943a 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -627,7 +627,7 @@ static int journal_list_still_alive(struct super_block *s,
 static void release_buffer_page(struct buffer_head *bh)
 {
 	struct page *page = bh->b_page;
-	if (!page->mapping && !TestSetPageLocked(page)) {
+	if (!page->mapping && trylock_page(page)) {
 		page_cache_get(page);
 		put_bh(bh);
 		if (!page->mapping)
@@ -855,7 +855,7 @@ static int write_ordered_buffers(spinlock_t * lock,
 		jh = JH_ENTRY(list->next);
 		bh = jh->bh;
 		get_bh(bh);
-		if (test_set_buffer_locked(bh)) {
+		if (!trylock_buffer(bh)) {
 			if (!buffer_dirty(bh)) {
 				list_move(&jh->list, &tmp);
 				goto loop_next;
@@ -3871,7 +3871,7 @@ int reiserfs_prepare_for_journal(struct super_block *p_s_sb,
 {
 	PROC_INFO_INC(p_s_sb, journal.prepare);
 
-	if (test_set_buffer_locked(bh)) {
+	if (!trylock_buffer(bh)) {
 		if (!wait)
 			return 0;
 		lock_buffer(bh);
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 879e54d35c2..d318c7e663f 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -27,7 +27,6 @@
 #include <linux/mnt_namespace.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
-#include <linux/quotaops.h>
 
 struct file_system_type reiserfs_fs_type;
 
@@ -2076,8 +2075,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
 		return err;
 	/* Quotafile not on the same filesystem? */
 	if (nd.path.mnt->mnt_sb != sb) {
-		path_put(&nd.path);
-		return -EXDEV;
+		err = -EXDEV;
+		goto out;
 	}
 	inode = nd.path.dentry->d_inode;
 	/* We must not pack tails for quota files on reiserfs for quota IO to work */
@@ -2087,8 +2086,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
 			reiserfs_warning(sb,
 				"reiserfs: Unpacking tail of quota file failed"
 				" (%d). Cannot turn on quotas.", err);
-			path_put(&nd.path);
-			return -EINVAL;
+			err = -EINVAL;
+			goto out;
 		}
 		mark_inode_dirty(inode);
 	}
@@ -2109,13 +2108,15 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
 		/* Just start temporary transaction and finish it */
 		err = journal_begin(&th, sb, 1);
 		if (err)
-			return err;
+			goto out;
 		err = journal_end_sync(&th, sb, 1);
 		if (err)
-			return err;
+			goto out;
 	}
+	err = vfs_quota_on_path(sb, type, format_id, &nd.path);
+out:
 	path_put(&nd.path);
-	return vfs_quota_on(sb, type, format_id, path, 0);
+	return err;
 }
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c
index 8e51a2aaa97..60d2f822e87 100644
--- a/fs/romfs/inode.c
+++ b/fs/romfs/inode.c
@@ -418,7 +418,8 @@ static int
 romfs_readpage(struct file *file, struct page * page)
 {
 	struct inode *inode = page->mapping->host;
-	loff_t offset, avail, readlen;
+	loff_t offset, size;
+	unsigned long filled;
 	void *buf;
 	int result = -EIO;
 
@@ -430,21 +431,29 @@ romfs_readpage(struct file *file, struct page * page)
 
 	/* 32 bit warning -- but not for us :) */
 	offset = page_offset(page);
-	if (offset < i_size_read(inode)) {
-		avail = inode->i_size-offset;
-		readlen = min_t(unsigned long, avail, PAGE_SIZE);
-		if (romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen) == readlen) {
-			if (readlen < PAGE_SIZE) {
-				memset(buf + readlen,0,PAGE_SIZE-readlen);
-			}
-			SetPageUptodate(page);
-			result = 0;
+	size = i_size_read(inode);
+	filled = 0;
+	result = 0;
+	if (offset < size) {
+		unsigned long readlen;
+
+		size -= offset;
+		readlen = size > PAGE_SIZE ? PAGE_SIZE : size;
+
+		filled = romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen);
+
+		if (filled != readlen) {
+			SetPageError(page);
+			filled = 0;
+			result = -EIO;
 		}
 	}
-	if (result) {
-		memset(buf, 0, PAGE_SIZE);
-		SetPageError(page);
-	}
+
+	if (filled < PAGE_SIZE)
+		memset(buf + filled, 0, PAGE_SIZE-filled);
+
+	if (!result)
+		SetPageUptodate(page);
 	flush_dcache_page(page);
 
 	unlock_page(page);
diff --git a/fs/seq_file.c b/fs/seq_file.c
index 3f54dbd6c49..bd20f7f5a93 100644
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -108,9 +108,9 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 			goto Done;
 	}
 	/* we need at least one record in buffer */
+	pos = m->index;
+	p = m->op->start(m, &pos);
 	while (1) {
-		pos = m->index;
-		p = m->op->start(m, &pos);
 		err = PTR_ERR(p);
 		if (!p || IS_ERR(p))
 			break;
@@ -119,6 +119,11 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 			break;
 		if (unlikely(err))
 			m->count = 0;
+		if (unlikely(!m->count)) {
+			p = m->op->next(m, p, &pos);
+			m->index = pos;
+			continue;
+		}
 		if (m->count < m->size)
 			goto Fill;
 		m->op->stop(m, p);
@@ -128,6 +133,8 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 			goto Enomem;
 		m->count = 0;
 		m->version = 0;
+		pos = m->index;
+		p = m->op->start(m, &pos);
 	}
 	m->op->stop(m, p);
 	m->count = 0;
@@ -443,6 +450,20 @@ int seq_dentry(struct seq_file *m, struct dentry *dentry, char *esc)
 	return -1;
 }
 
+int seq_bitmap(struct seq_file *m, unsigned long *bits, unsigned int nr_bits)
+{
+	size_t len = bitmap_scnprintf_len(nr_bits);
+
+	if (m->count + len < m->size) {
+		bitmap_scnprintf(m->buf + m->count, m->size - m->count,
+				 bits, nr_bits);
+		m->count += len;
+		return 0;
+	}
+	m->count = m->size;
+	return -1;
+}
+
 static void *single_start(struct seq_file *p, loff_t *pos)
 {
 	return NULL + (*pos == 0);
diff --git a/fs/splice.c b/fs/splice.c
index b30311ba8af..1bbc6f4bb09 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -371,7 +371,7 @@ __generic_file_splice_read(struct file *in, loff_t *ppos,
 			 * for an in-flight io page
 			 */
 			if (flags & SPLICE_F_NONBLOCK) {
-				if (TestSetPageLocked(page)) {
+				if (!trylock_page(page)) {
 					error = -EAGAIN;
 					break;
 				}
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index d81fb9ed2b8..73db464cd08 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -263,8 +263,8 @@ int ubifs_calc_min_idx_lebs(struct ubifs_info *c)
 
 	idx_size = c->old_idx_sz + c->budg_idx_growth + c->budg_uncommitted_idx;
 
-	/* And make sure we have twice the index size of space reserved */
-	idx_size <<= 1;
+	/* And make sure we have thrice the index size of space reserved */
+	idx_size = idx_size + (idx_size << 1);
 
 	/*
 	 * We do not maintain 'old_idx_size' as 'old_idx_lebs'/'old_idx_bytes'
@@ -302,18 +302,6 @@ long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs)
 	int subtract_lebs;
 	long long available;
 
-	/*
-	 * Force the amount available to the total size reported if the used
-	 * space is zero.
-	 */
-	if (c->lst.total_used <= UBIFS_INO_NODE_SZ &&
-	    c->budg_data_growth + c->budg_dd_growth == 0) {
-		/* Do the same calculation as for c->block_cnt */
-		available = c->main_lebs - 2;
-		available *= c->leb_size - c->dark_wm;
-		return available;
-	}
-
 	available = c->main_bytes - c->lst.total_used;
 
 	/*
@@ -388,11 +376,11 @@ static int can_use_rp(struct ubifs_info *c)
  * This function makes sure UBIFS has enough free eraseblocks for index growth
  * and data.
  *
- * When budgeting index space, UBIFS reserves twice as more LEBs as the index
+ * When budgeting index space, UBIFS reserves thrice as many LEBs as the index
  * would take if it was consolidated and written to the flash. This guarantees
  * that the "in-the-gaps" commit method always succeeds and UBIFS will always
  * be able to commit dirty index. So this function basically adds amount of
- * budgeted index space to the size of the current index, multiplies this by 2,
+ * budgeted index space to the size of the current index, multiplies this by 3,
  * and makes sure this does not exceed the amount of free eraseblocks.
  *
  * Notes about @c->min_idx_lebs and @c->lst.idx_lebs variables:
@@ -543,8 +531,16 @@ int ubifs_budget_space(struct ubifs_info *c, struct ubifs_budget_req *req)
 	int err, idx_growth, data_growth, dd_growth;
 	struct retries_info ri;
 
+	ubifs_assert(req->new_page <= 1);
+	ubifs_assert(req->dirtied_page <= 1);
+	ubifs_assert(req->new_dent <= 1);
+	ubifs_assert(req->mod_dent <= 1);
+	ubifs_assert(req->new_ino <= 1);
+	ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA);
 	ubifs_assert(req->dirtied_ino <= 4);
 	ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4);
+	ubifs_assert(!(req->new_ino_d & 7));
+	ubifs_assert(!(req->dirtied_ino_d & 7));
 
 	data_growth = calc_data_growth(c, req);
 	dd_growth = calc_dd_growth(c, req);
@@ -618,8 +614,16 @@ again:
  */
 void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req)
 {
+	ubifs_assert(req->new_page <= 1);
+	ubifs_assert(req->dirtied_page <= 1);
+	ubifs_assert(req->new_dent <= 1);
+	ubifs_assert(req->mod_dent <= 1);
+	ubifs_assert(req->new_ino <= 1);
+	ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA);
 	ubifs_assert(req->dirtied_ino <= 4);
 	ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4);
+	ubifs_assert(!(req->new_ino_d & 7));
+	ubifs_assert(!(req->dirtied_ino_d & 7));
 	if (!req->recalculate) {
 		ubifs_assert(req->idx_growth >= 0);
 		ubifs_assert(req->data_growth >= 0);
@@ -647,7 +651,11 @@ void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req)
 
 	ubifs_assert(c->budg_idx_growth >= 0);
 	ubifs_assert(c->budg_data_growth >= 0);
+	ubifs_assert(c->budg_dd_growth >= 0);
 	ubifs_assert(c->min_idx_lebs < c->main_lebs);
+	ubifs_assert(!(c->budg_idx_growth & 7));
+	ubifs_assert(!(c->budg_data_growth & 7));
+	ubifs_assert(!(c->budg_dd_growth & 7));
 	spin_unlock(&c->space_lock);
 }
 
@@ -686,41 +694,114 @@ void ubifs_convert_page_budget(struct ubifs_info *c)
 void ubifs_release_dirty_inode_budget(struct ubifs_info *c,
 				      struct ubifs_inode *ui)
 {
-	struct ubifs_budget_req req = {.dd_growth = c->inode_budget,
-				       .dirtied_ino_d = ui->data_len};
+	struct ubifs_budget_req req;
 
+	memset(&req, 0, sizeof(struct ubifs_budget_req));
+	req.dd_growth = c->inode_budget + ALIGN(ui->data_len, 8);
 	ubifs_release_budget(c, &req);
 }
 
 /**
- * ubifs_budg_get_free_space - return amount of free space.
+ * ubifs_reported_space - calculate reported free space.
+ * @c: the UBIFS file-system description object
+ * @free: amount of free space
+ *
+ * This function calculates amount of free space which will be reported to
+ * user-space. User-space application tend to expect that if the file-system
+ * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
+ * are able to write a file of size N. UBIFS attaches node headers to each data
+ * node and it has to write indexind nodes as well. This introduces additional
+ * overhead, and UBIFS it has to report sligtly less free space to meet the
+ * above expectetion.
+ *
+ * This function assumes free space is made up of uncompressed data nodes and
+ * full index nodes (one per data node, tripled because we always allow enough
+ * space to write the index thrice).
+ *
+ * Note, the calculation is pessimistic, which means that most of the time
+ * UBIFS reports less space than it actually has.
+ */
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free)
+{
+	int divisor, factor, f;
+
+	/*
+	 * Reported space size is @free * X, where X is UBIFS block size
+	 * divided by UBIFS block size + all overhead one data block
+	 * introduces. The overhead is the node header + indexing overhead.
+	 *
+	 * Indexing overhead calculations are based on the following formula:
+	 * I = N/(f - 1) + 1, where I - number of indexing nodes, N - number
+	 * of data nodes, f - fanout. Because effective UBIFS fanout is twice
+	 * as less than maximum fanout, we assume that each data node
+	 * introduces 3 * @c->max_idx_node_sz / (@c->fanout/2 - 1) bytes.
+	 * Note, the multiplier 3 is because UBIFS reseves thrice as more space
+	 * for the index.
+	 */
+	f = c->fanout > 3 ? c->fanout >> 1 : 2;
+	factor = UBIFS_BLOCK_SIZE;
+	divisor = UBIFS_MAX_DATA_NODE_SZ;
+	divisor += (c->max_idx_node_sz * 3) / (f - 1);
+	free *= factor;
+	do_div(free, divisor);
+	return free;
+}
+
+/**
+ * ubifs_get_free_space - return amount of free space.
  * @c: UBIFS file-system description object
  *
- * This function returns amount of free space on the file-system.
+ * This function calculates amount of free space to report to user-space.
+ *
+ * Because UBIFS may introduce substantial overhead (the index, node headers,
+ * alighment, wastage at the end of eraseblocks, etc), it cannot report real
+ * amount of free flash space it has (well, because not all dirty space is
+ * reclamable, UBIFS does not actually know the real amount). If UBIFS did so,
+ * it would bread user expectetion about what free space is. Users seem to
+ * accustomed to assume that if the file-system reports N bytes of free space,
+ * they would be able to fit a file of N bytes to the FS. This almost works for
+ * traditional file-systems, because they have way less overhead than UBIFS.
+ * So, to keep users happy, UBIFS tries to take the overhead into account.
  */
-long long ubifs_budg_get_free_space(struct ubifs_info *c)
+long long ubifs_get_free_space(struct ubifs_info *c)
 {
-	int min_idx_lebs, rsvd_idx_lebs;
+	int min_idx_lebs, rsvd_idx_lebs, lebs;
 	long long available, outstanding, free;
 
-	/* Do exactly the same calculations as in 'do_budget_space()' */
 	spin_lock(&c->space_lock);
 	min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+	outstanding = c->budg_data_growth + c->budg_dd_growth;
 
-	if (min_idx_lebs > c->lst.idx_lebs)
-		rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
-	else
-		rsvd_idx_lebs = 0;
-
-	if (rsvd_idx_lebs > c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt
-				- c->lst.taken_empty_lebs) {
+	/*
+	 * Force the amount available to the total size reported if the used
+	 * space is zero.
+	 */
+	if (c->lst.total_used <= UBIFS_INO_NODE_SZ && !outstanding) {
 		spin_unlock(&c->space_lock);
-		return 0;
+		return (long long)c->block_cnt << UBIFS_BLOCK_SHIFT;
 	}
 
 	available = ubifs_calc_available(c, min_idx_lebs);
-	outstanding = c->budg_data_growth + c->budg_dd_growth;
-	c->min_idx_lebs = min_idx_lebs;
+
+	/*
+	 * When reporting free space to user-space, UBIFS guarantees that it is
+	 * possible to write a file of free space size. This means that for
+	 * empty LEBs we may use more precise calculations than
+	 * 'ubifs_calc_available()' is using. Namely, we know that in empty
+	 * LEBs we would waste only @c->leb_overhead bytes, not @c->dark_wm.
+	 * Thus, amend the available space.
+	 *
+	 * Note, the calculations below are similar to what we have in
+	 * 'do_budget_space()', so refer there for comments.
+	 */
+	if (min_idx_lebs > c->lst.idx_lebs)
+		rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
+	else
+		rsvd_idx_lebs = 0;
+	lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
+	       c->lst.taken_empty_lebs;
+	lebs -= rsvd_idx_lebs;
+	available += lebs * (c->dark_wm - c->leb_overhead);
 	spin_unlock(&c->space_lock);
 
 	if (available > outstanding)
diff --git a/fs/ubifs/commit.c b/fs/ubifs/commit.c
index 3b516316c9b..0a6aa2cc78f 100644
--- a/fs/ubifs/commit.c
+++ b/fs/ubifs/commit.c
@@ -74,6 +74,7 @@ static int do_commit(struct ubifs_info *c)
 			goto out_up;
 	}
 
+	c->cmt_no += 1;
 	err = ubifs_gc_start_commit(c);
 	if (err)
 		goto out_up;
@@ -115,7 +116,7 @@ static int do_commit(struct ubifs_info *c)
 		goto out;
 
 	mutex_lock(&c->mst_mutex);
-	c->mst_node->cmt_no      = cpu_to_le64(++c->cmt_no);
+	c->mst_node->cmt_no      = cpu_to_le64(c->cmt_no);
 	c->mst_node->log_lnum    = cpu_to_le32(new_ltail_lnum);
 	c->mst_node->root_lnum   = cpu_to_le32(zroot.lnum);
 	c->mst_node->root_offs   = cpu_to_le32(zroot.offs);
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index 4e3aaeba4ec..b9cb7747375 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -568,8 +568,8 @@ void dbg_dump_budget_req(const struct ubifs_budget_req *req)
 void dbg_dump_lstats(const struct ubifs_lp_stats *lst)
 {
 	spin_lock(&dbg_lock);
-	printk(KERN_DEBUG "Lprops statistics: empty_lebs %d, idx_lebs  %d\n",
-	       lst->empty_lebs, lst->idx_lebs);
+	printk(KERN_DEBUG "(pid %d) Lprops statistics: empty_lebs %d, "
+	       "idx_lebs  %d\n", current->pid, lst->empty_lebs, lst->idx_lebs);
 	printk(KERN_DEBUG "\ttaken_empty_lebs %d, total_free %lld, "
 	       "total_dirty %lld\n", lst->taken_empty_lebs, lst->total_free,
 	       lst->total_dirty);
@@ -587,8 +587,8 @@ void dbg_dump_budg(struct ubifs_info *c)
 	struct ubifs_gced_idx_leb *idx_gc;
 
 	spin_lock(&dbg_lock);
-	printk(KERN_DEBUG "Budgeting info: budg_data_growth %lld, "
-	       "budg_dd_growth %lld, budg_idx_growth %lld\n",
+	printk(KERN_DEBUG "(pid %d) Budgeting info: budg_data_growth %lld, "
+	       "budg_dd_growth %lld, budg_idx_growth %lld\n", current->pid,
 	       c->budg_data_growth, c->budg_dd_growth, c->budg_idx_growth);
 	printk(KERN_DEBUG "\tdata budget sum %lld, total budget sum %lld, "
 	       "freeable_cnt %d\n", c->budg_data_growth + c->budg_dd_growth,
@@ -634,7 +634,7 @@ void dbg_dump_lprops(struct ubifs_info *c)
 	struct ubifs_lprops lp;
 	struct ubifs_lp_stats lst;
 
-	printk(KERN_DEBUG "Dumping LEB properties\n");
+	printk(KERN_DEBUG "(pid %d) Dumping LEB properties\n", current->pid);
 	ubifs_get_lp_stats(c, &lst);
 	dbg_dump_lstats(&lst);
 
@@ -655,7 +655,7 @@ void dbg_dump_leb(const struct ubifs_info *c, int lnum)
 	if (dbg_failure_mode)
 		return;
 
-	printk(KERN_DEBUG "Dumping LEB %d\n", lnum);
+	printk(KERN_DEBUG "(pid %d) Dumping LEB %d\n", current->pid, lnum);
 
 	sleb = ubifs_scan(c, lnum, 0, c->dbg_buf);
 	if (IS_ERR(sleb)) {
@@ -720,8 +720,8 @@ void dbg_dump_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat)
 {
 	int i;
 
-	printk(KERN_DEBUG "Dumping heap cat %d (%d elements)\n",
-	       cat, heap->cnt);
+	printk(KERN_DEBUG "(pid %d) Dumping heap cat %d (%d elements)\n",
+	       current->pid, cat, heap->cnt);
 	for (i = 0; i < heap->cnt; i++) {
 		struct ubifs_lprops *lprops = heap->arr[i];
 
@@ -736,7 +736,7 @@ void dbg_dump_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
 {
 	int i;
 
-	printk(KERN_DEBUG "Dumping pnode:\n");
+	printk(KERN_DEBUG "(pid %d) Dumping pnode:\n", current->pid);
 	printk(KERN_DEBUG "\taddress %zx parent %zx cnext %zx\n",
 	       (size_t)pnode, (size_t)parent, (size_t)pnode->cnext);
 	printk(KERN_DEBUG "\tflags %lu iip %d level %d num %d\n",
@@ -755,7 +755,7 @@ void dbg_dump_tnc(struct ubifs_info *c)
 	int level;
 
 	printk(KERN_DEBUG "\n");
-	printk(KERN_DEBUG "Dumping the TNC tree\n");
+	printk(KERN_DEBUG "(pid %d) Dumping the TNC tree\n", current->pid);
 	znode = ubifs_tnc_levelorder_next(c->zroot.znode, NULL);
 	level = znode->level;
 	printk(KERN_DEBUG "== Level %d ==\n", level);
@@ -2208,16 +2208,17 @@ int dbg_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
 int dbg_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 		  int offset, int len, int dtype)
 {
-	int err;
+	int err, failing;
 
 	if (in_failure_mode(desc))
 		return -EIO;
-	if (do_fail(desc, lnum, 1))
+	failing = do_fail(desc, lnum, 1);
+	if (failing)
 		cut_data(buf, len);
 	err = ubi_leb_write(desc, lnum, buf, offset, len, dtype);
 	if (err)
 		return err;
-	if (in_failure_mode(desc))
+	if (failing)
 		return -EIO;
 	return 0;
 }
diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h
index 3c4f1e93c9e..50315fc5718 100644
--- a/fs/ubifs/debug.h
+++ b/fs/ubifs/debug.h
@@ -27,7 +27,7 @@
 
 #define UBIFS_DBG(op) op
 
-#define ubifs_assert(expr)  do {                                               \
+#define ubifs_assert(expr) do {                                                \
 	if (unlikely(!(expr))) {                                               \
 		printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \
 		       __func__, __LINE__, current->pid);                      \
@@ -73,50 +73,50 @@ const char *dbg_key_str1(const struct ubifs_info *c,
 			 const union ubifs_key *key);
 
 /*
- * DBGKEY macros require dbg_lock to be held, which it is in the dbg message
+ * DBGKEY macros require @dbg_lock to be held, which it is in the dbg message
  * macros.
  */
 #define DBGKEY(key) dbg_key_str0(c, (key))
 #define DBGKEY1(key) dbg_key_str1(c, (key))
 
 /* General messages */
-#define dbg_gen(fmt, ...)        dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__)
+#define dbg_gen(fmt, ...)   dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__)
 
 /* Additional journal messages */
-#define dbg_jnl(fmt, ...)        dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__)
+#define dbg_jnl(fmt, ...)   dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__)
 
 /* Additional TNC messages */
-#define dbg_tnc(fmt, ...)        dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__)
+#define dbg_tnc(fmt, ...)   dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__)
 
 /* Additional lprops messages */
-#define dbg_lp(fmt, ...)         dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__)
+#define dbg_lp(fmt, ...)    dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__)
 
 /* Additional LEB find messages */
-#define dbg_find(fmt, ...)       dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__)
+#define dbg_find(fmt, ...)  dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__)
 
 /* Additional mount messages */
-#define dbg_mnt(fmt, ...)        dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__)
+#define dbg_mnt(fmt, ...)   dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__)
 
 /* Additional I/O messages */
-#define dbg_io(fmt, ...)         dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__)
+#define dbg_io(fmt, ...)    dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__)
 
 /* Additional commit messages */
-#define dbg_cmt(fmt, ...)        dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__)
+#define dbg_cmt(fmt, ...)   dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__)
 
 /* Additional budgeting messages */
-#define dbg_budg(fmt, ...)       dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__)
+#define dbg_budg(fmt, ...)  dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__)
 
 /* Additional log messages */
-#define dbg_log(fmt, ...)        dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__)
+#define dbg_log(fmt, ...)   dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__)
 
 /* Additional gc messages */
-#define dbg_gc(fmt, ...)         dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__)
+#define dbg_gc(fmt, ...)    dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__)
 
 /* Additional scan messages */
-#define dbg_scan(fmt, ...)       dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__)
+#define dbg_scan(fmt, ...)  dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__)
 
 /* Additional recovery messages */
-#define dbg_rcvry(fmt, ...)      dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__)
+#define dbg_rcvry(fmt, ...) dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__)
 
 /*
  * Debugging message type flags (must match msg_type_names in debug.c).
@@ -239,34 +239,23 @@ typedef int (*dbg_leaf_callback)(struct ubifs_info *c,
 				 struct ubifs_zbranch *zbr, void *priv);
 typedef int (*dbg_znode_callback)(struct ubifs_info *c,
 				  struct ubifs_znode *znode, void *priv);
-
 int dbg_walk_index(struct ubifs_info *c, dbg_leaf_callback leaf_cb,
 		   dbg_znode_callback znode_cb, void *priv);
 
 /* Checking functions */
 
 int dbg_check_lprops(struct ubifs_info *c);
-
 int dbg_old_index_check_init(struct ubifs_info *c, struct ubifs_zbranch *zroot);
 int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot);
-
 int dbg_check_cats(struct ubifs_info *c);
-
 int dbg_check_ltab(struct ubifs_info *c);
-
 int dbg_check_synced_i_size(struct inode *inode);
-
 int dbg_check_dir_size(struct ubifs_info *c, const struct inode *dir);
-
 int dbg_check_tnc(struct ubifs_info *c, int extra);
-
 int dbg_check_idx_size(struct ubifs_info *c, long long idx_size);
-
 int dbg_check_filesystem(struct ubifs_info *c);
-
 void dbg_check_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat,
 		    int add_pos);
-
 int dbg_check_lprops(struct ubifs_info *c);
 int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode,
 			int row, int col);
@@ -329,71 +318,77 @@ static inline int dbg_change(struct ubi_volume_desc *desc, int lnum,
 #else /* !CONFIG_UBIFS_FS_DEBUG */
 
 #define UBIFS_DBG(op)
-#define ubifs_assert(expr)                         ({})
-#define ubifs_assert_cmt_locked(c)
+
+/* Use "if (0)" to make compiler check arguments even if debugging is off */
+#define ubifs_assert(expr)  do {                                               \
+	if (0 && (expr))                                                       \
+		printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \
+		       __func__, __LINE__, current->pid);                      \
+} while (0)
+
+#define dbg_err(fmt, ...)   do {                                               \
+	if (0)                                                                 \
+		ubifs_err(fmt, ##__VA_ARGS__);                                 \
+} while (0)
+
+#define dbg_msg(fmt, ...) do {                                                 \
+	if (0)                                                                 \
+		printk(KERN_DEBUG "UBIFS DBG (pid %d): %s: " fmt "\n",         \
+		       current->pid, __func__, ##__VA_ARGS__);                 \
+} while (0)
+
 #define dbg_dump_stack()
-#define dbg_err(fmt, ...)                          ({})
-#define dbg_msg(fmt, ...)                          ({})
-#define dbg_key(c, key, fmt, ...)                  ({})
-
-#define dbg_gen(fmt, ...)                          ({})
-#define dbg_jnl(fmt, ...)                          ({})
-#define dbg_tnc(fmt, ...)                          ({})
-#define dbg_lp(fmt, ...)                           ({})
-#define dbg_find(fmt, ...)                         ({})
-#define dbg_mnt(fmt, ...)                          ({})
-#define dbg_io(fmt, ...)                           ({})
-#define dbg_cmt(fmt, ...)                          ({})
-#define dbg_budg(fmt, ...)                         ({})
-#define dbg_log(fmt, ...)                          ({})
-#define dbg_gc(fmt, ...)                           ({})
-#define dbg_scan(fmt, ...)                         ({})
-#define dbg_rcvry(fmt, ...)                        ({})
-
-#define dbg_ntype(type)                            ""
-#define dbg_cstate(cmt_state)                      ""
-#define dbg_get_key_dump(c, key)                   ({})
-#define dbg_dump_inode(c, inode)                   ({})
-#define dbg_dump_node(c, node)                     ({})
-#define dbg_dump_budget_req(req)                   ({})
-#define dbg_dump_lstats(lst)                       ({})
-#define dbg_dump_budg(c)                           ({})
-#define dbg_dump_lprop(c, lp)                      ({})
-#define dbg_dump_lprops(c)                         ({})
-#define dbg_dump_leb(c, lnum)                      ({})
-#define dbg_dump_znode(c, znode)                   ({})
-#define dbg_dump_heap(c, heap, cat)                ({})
-#define dbg_dump_pnode(c, pnode, parent, iip)      ({})
-#define dbg_dump_tnc(c)                            ({})
-#define dbg_dump_index(c)                          ({})
+#define ubifs_assert_cmt_locked(c)
 
-#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
+#define dbg_gen(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_jnl(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_tnc(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_lp(fmt, ...)    dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_find(fmt, ...)  dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_mnt(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_io(fmt, ...)    dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_cmt(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_budg(fmt, ...)  dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_log(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_gc(fmt, ...)    dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_scan(fmt, ...)  dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_rcvry(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+
+#define DBGKEY(key)  ((char *)(key))
+#define DBGKEY1(key) ((char *)(key))
+
+#define dbg_ntype(type)                       ""
+#define dbg_cstate(cmt_state)                 ""
+#define dbg_get_key_dump(c, key)              ({})
+#define dbg_dump_inode(c, inode)              ({})
+#define dbg_dump_node(c, node)                ({})
+#define dbg_dump_budget_req(req)              ({})
+#define dbg_dump_lstats(lst)                  ({})
+#define dbg_dump_budg(c)                      ({})
+#define dbg_dump_lprop(c, lp)                 ({})
+#define dbg_dump_lprops(c)                    ({})
+#define dbg_dump_leb(c, lnum)                 ({})
+#define dbg_dump_znode(c, znode)              ({})
+#define dbg_dump_heap(c, heap, cat)           ({})
+#define dbg_dump_pnode(c, pnode, parent, iip) ({})
+#define dbg_dump_tnc(c)                       ({})
+#define dbg_dump_index(c)                     ({})
 
+#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
 #define dbg_old_index_check_init(c, zroot)         0
 #define dbg_check_old_index(c, zroot)              0
-
 #define dbg_check_cats(c)                          0
-
 #define dbg_check_ltab(c)                          0
-
 #define dbg_check_synced_i_size(inode)             0
-
 #define dbg_check_dir_size(c, dir)                 0
-
 #define dbg_check_tnc(c, x)                        0
-
 #define dbg_check_idx_size(c, idx_size)            0
-
 #define dbg_check_filesystem(c)                    0
-
 #define dbg_check_heap(c, heap, cat, add_pos)      ({})
-
 #define dbg_check_lprops(c)                        0
 #define dbg_check_lpt_nodes(c, cnode, row, col)    0
-
 #define dbg_force_in_the_gaps_enabled              0
 #define dbg_force_in_the_gaps()                    0
-
 #define dbg_failure_mode                           0
 #define dbg_failure_mode_registration(c)           ({})
 #define dbg_failure_mode_deregistration(c)         ({})
diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index e90374be7d3..2b267c9a180 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -165,7 +165,6 @@ struct inode *ubifs_new_inode(struct ubifs_info *c, const struct inode *dir,
 	}
 
 	inode->i_ino = ++c->highest_inum;
-	inode->i_generation = ++c->vfs_gen;
 	/*
 	 * The creation sequence number remains with this inode for its
 	 * lifetime. All nodes for this inode have a greater sequence number,
@@ -220,15 +219,7 @@ static struct dentry *ubifs_lookup(struct inode *dir, struct dentry *dentry,
 
 	err = ubifs_tnc_lookup_nm(c, &key, dent, &dentry->d_name);
 	if (err) {
-		/*
-		 * Do not hash the direntry if parent 'i_nlink' is zero, because
-		 * this has side-effects - '->delete_inode()' call will not be
-		 * called for the parent orphan inode, because 'd_count' of its
-		 * direntry will stay 1 (it'll be negative direntry I guess)
-		 * and prevent 'iput_final()' until the dentry is destroyed due
-		 * to unmount or memory pressure.
-		 */
-		if (err == -ENOENT && dir->i_nlink != 0) {
+		if (err == -ENOENT) {
 			dbg_gen("not found");
 			goto done;
 		}
@@ -525,7 +516,7 @@ static int ubifs_link(struct dentry *old_dentry, struct inode *dir,
 	struct ubifs_inode *dir_ui = ubifs_inode(dir);
 	int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len);
 	struct ubifs_budget_req req = { .new_dent = 1, .dirtied_ino = 2,
-					.dirtied_ino_d = ui->data_len };
+				.dirtied_ino_d = ALIGN(ui->data_len, 8) };
 
 	/*
 	 * Budget request settings: new direntry, changing the target inode,
@@ -596,7 +587,6 @@ static int ubifs_unlink(struct inode *dir, struct dentry *dentry)
 	if (err) {
 		if (err != -ENOSPC)
 			return err;
-		err = 0;
 		budgeted = 0;
 	}
 
@@ -727,8 +717,7 @@ static int ubifs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	struct ubifs_inode *dir_ui = ubifs_inode(dir);
 	struct ubifs_info *c = dir->i_sb->s_fs_info;
 	int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len);
-	struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
-					.dirtied_ino_d = 1 };
+	struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1 };
 
 	/*
 	 * Budget request settings: new inode, new direntry and changing parent
@@ -789,7 +778,8 @@ static int ubifs_mknod(struct inode *dir, struct dentry *dentry,
 	int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
 	int err, devlen = 0;
 	struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
-					.new_ino_d = devlen, .dirtied_ino = 1 };
+					.new_ino_d = ALIGN(devlen, 8),
+					.dirtied_ino = 1 };
 
 	/*
 	 * Budget request settings: new inode, new direntry and changing parent
@@ -863,7 +853,8 @@ static int ubifs_symlink(struct inode *dir, struct dentry *dentry,
 	int err, len = strlen(symname);
 	int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
 	struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
-					.new_ino_d = len, .dirtied_ino = 1 };
+					.new_ino_d = ALIGN(len, 8),
+					.dirtied_ino = 1 };
 
 	/*
 	 * Budget request settings: new inode, new direntry and changing parent
@@ -1012,7 +1003,7 @@ static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	struct ubifs_budget_req req = { .new_dent = 1, .mod_dent = 1,
 					.dirtied_ino = 3 };
 	struct ubifs_budget_req ino_req = { .dirtied_ino = 1,
-				.dirtied_ino_d = old_inode_ui->data_len };
+			.dirtied_ino_d = ALIGN(old_inode_ui->data_len, 8) };
 	struct timespec time;
 
 	/*
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 8565e586e53..3d698e2022b 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -793,7 +793,7 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode,
 	int err;
 	struct ubifs_budget_req req;
 	loff_t old_size = inode->i_size, new_size = attr->ia_size;
-	int offset = new_size & (UBIFS_BLOCK_SIZE - 1);
+	int offset = new_size & (UBIFS_BLOCK_SIZE - 1), budgeted = 1;
 	struct ubifs_inode *ui = ubifs_inode(inode);
 
 	dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size);
@@ -811,8 +811,15 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode,
 	/* A funny way to budget for truncation node */
 	req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ;
 	err = ubifs_budget_space(c, &req);
-	if (err)
-		return err;
+	if (err) {
+		/*
+		 * Treat truncations to zero as deletion and always allow them,
+		 * just like we do for '->unlink()'.
+		 */
+		if (new_size || err != -ENOSPC)
+			return err;
+		budgeted = 0;
+	}
 
 	err = vmtruncate(inode, new_size);
 	if (err)
@@ -869,7 +876,12 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode,
 	err = ubifs_jnl_truncate(c, inode, old_size, new_size);
 	mutex_unlock(&ui->ui_mutex);
 out_budg:
-	ubifs_release_budget(c, &req);
+	if (budgeted)
+		ubifs_release_budget(c, &req);
+	else {
+		c->nospace = c->nospace_rp = 0;
+		smp_wmb();
+	}
 	return err;
 }
 
@@ -890,7 +902,7 @@ static int do_setattr(struct ubifs_info *c, struct inode *inode,
 	loff_t new_size = attr->ia_size;
 	struct ubifs_inode *ui = ubifs_inode(inode);
 	struct ubifs_budget_req req = { .dirtied_ino = 1,
-					.dirtied_ino_d = ui->data_len };
+				.dirtied_ino_d = ALIGN(ui->data_len, 8) };
 
 	err = ubifs_budget_space(c, &req);
 	if (err)
@@ -941,7 +953,8 @@ int ubifs_setattr(struct dentry *dentry, struct iattr *attr)
 	struct inode *inode = dentry->d_inode;
 	struct ubifs_info *c = inode->i_sb->s_fs_info;
 
-	dbg_gen("ino %lu, ia_valid %#x", inode->i_ino, attr->ia_valid);
+	dbg_gen("ino %lu, mode %#x, ia_valid %#x",
+		inode->i_ino, inode->i_mode, attr->ia_valid);
 	err = inode_change_ok(inode, attr);
 	if (err)
 		return err;
@@ -1051,7 +1064,7 @@ static int update_mctime(struct ubifs_info *c, struct inode *inode)
 	if (mctime_update_needed(inode, &now)) {
 		int err, release;
 		struct ubifs_budget_req req = { .dirtied_ino = 1,
-						.dirtied_ino_d = ui->data_len };
+				.dirtied_ino_d = ALIGN(ui->data_len, 8) };
 
 		err = ubifs_budget_space(c, &req);
 		if (err)
@@ -1270,6 +1283,7 @@ struct file_operations ubifs_file_operations = {
 	.fsync          = ubifs_fsync,
 	.unlocked_ioctl = ubifs_ioctl,
 	.splice_read	= generic_file_splice_read,
+	.splice_write	= generic_file_splice_write,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl   = ubifs_compat_ioctl,
 #endif
diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c
index 10394c54836..e045c8b5542 100644
--- a/fs/ubifs/find.c
+++ b/fs/ubifs/find.c
@@ -211,14 +211,8 @@ static const struct ubifs_lprops *scan_for_dirty(struct ubifs_info *c,
  * dirty index heap, and it falls-back to LPT scanning if the heaps are empty
  * or do not have an LEB which satisfies the @min_space criteria.
  *
- * Note:
- *   o LEBs which have less than dead watermark of dirty space are never picked
- *   by this function;
- *
- * Returns zero and the LEB properties of
- * found dirty LEB in case of success, %-ENOSPC if no dirty LEB was found and a
- * negative error code in case of other failures. The returned LEB is marked as
- * "taken".
+ * Note, LEBs which have less than dead watermark of free + dirty space are
+ * never picked by this function.
  *
  * The additional @pick_free argument controls if this function has to return a
  * free or freeable LEB if one is present. For example, GC must to set it to %1,
@@ -231,6 +225,10 @@ static const struct ubifs_lprops *scan_for_dirty(struct ubifs_info *c,
  *
  * In addition @pick_free is set to %2 by the recovery process in order to
  * recover gc_lnum in which case an index LEB must not be returned.
+ *
+ * This function returns zero and the LEB properties of found dirty LEB in case
+ * of success, %-ENOSPC if no dirty LEB was found and a negative error code in
+ * case of other failures. The returned LEB is marked as "taken".
  */
 int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
 			 int min_space, int pick_free)
@@ -245,7 +243,7 @@ int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
 		int lebs, rsvd_idx_lebs = 0;
 
 		spin_lock(&c->space_lock);
-		lebs = c->lst.empty_lebs;
+		lebs = c->lst.empty_lebs + c->idx_gc_cnt;
 		lebs += c->freeable_cnt - c->lst.taken_empty_lebs;
 
 		/*
@@ -290,9 +288,14 @@ int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
 		idx_lp = idx_heap->arr[0];
 		sum = idx_lp->free + idx_lp->dirty;
 		/*
-		 * Since we reserve twice as more space for the index than it
+		 * Since we reserve thrice as much space for the index than it
 		 * actually takes, it does not make sense to pick indexing LEBs
-		 * with less than half LEB of dirty space.
+		 * with less than, say, half LEB of dirty space. May be half is
+		 * not the optimal boundary - this should be tested and
+		 * checked. This boundary should determine how much we use
+		 * in-the-gaps to consolidate the index comparing to how much
+		 * we use garbage collector to consolidate it. The "half"
+		 * criteria just feels to be fine.
 		 */
 		if (sum < min_space || sum < c->half_leb_size)
 			idx_lp = NULL;
@@ -312,7 +315,7 @@ int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
 		lp = idx_lp;
 
 	if (lp) {
-		ubifs_assert(lp->dirty >= c->dead_wm);
+		ubifs_assert(lp->free + lp->dirty >= c->dead_wm);
 		goto found;
 	}
 
diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c
index d0f3dac2908..13f1019c859 100644
--- a/fs/ubifs/gc.c
+++ b/fs/ubifs/gc.c
@@ -344,6 +344,12 @@ int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp)
 		if (err)
 			goto out;
 
+		/* Allow for races with TNC */
+		c->gced_lnum = lnum;
+		smp_wmb();
+		c->gc_seq += 1;
+		smp_wmb();
+
 		if (c->gc_lnum == -1) {
 			c->gc_lnum = lnum;
 			err = LEB_RETAINED;
diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c
index 3374f91b670..054363f2b20 100644
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -54,6 +54,20 @@
 #include "ubifs.h"
 
 /**
+ * ubifs_ro_mode - switch UBIFS to read read-only mode.
+ * @c: UBIFS file-system description object
+ * @err: error code which is the reason of switching to R/O mode
+ */
+void ubifs_ro_mode(struct ubifs_info *c, int err)
+{
+	if (!c->ro_media) {
+		c->ro_media = 1;
+		ubifs_warn("switched to read-only mode, error %d", err);
+		dbg_dump_stack();
+	}
+}
+
+/**
  * ubifs_check_node - check node.
  * @c: UBIFS file-system description object
  * @buf: node to check
diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c
index 283155abe5f..22993f867d1 100644
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -447,13 +447,11 @@ static int get_dent_type(int mode)
  * @ino: buffer in which to pack inode node
  * @inode: inode to pack
  * @last: indicates the last node of the group
- * @last_reference: non-zero if this is a deletion inode
  */
 static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino,
-		       const struct inode *inode, int last,
-		       int last_reference)
+		       const struct inode *inode, int last)
 {
-	int data_len = 0;
+	int data_len = 0, last_reference = !inode->i_nlink;
 	struct ubifs_inode *ui = ubifs_inode(inode);
 
 	ino->ch.node_type = UBIFS_INO_NODE;
@@ -596,9 +594,9 @@ int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir,
 	ubifs_prep_grp_node(c, dent, dlen, 0);
 
 	ino = (void *)dent + aligned_dlen;
-	pack_inode(c, ino, inode, 0, last_reference);
+	pack_inode(c, ino, inode, 0);
 	ino = (void *)ino + aligned_ilen;
-	pack_inode(c, ino, dir, 1, 0);
+	pack_inode(c, ino, dir, 1);
 
 	if (last_reference) {
 		err = ubifs_add_orphan(c, inode->i_ino);
@@ -606,6 +604,7 @@ int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir,
 			release_head(c, BASEHD);
 			goto out_finish;
 		}
+		ui->del_cmtno = c->cmt_no;
 	}
 
 	err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync);
@@ -750,30 +749,25 @@ out_free:
  * ubifs_jnl_write_inode - flush inode to the journal.
  * @c: UBIFS file-system description object
  * @inode: inode to flush
- * @deletion: inode has been deleted
  *
  * This function writes inode @inode to the journal. If the inode is
  * synchronous, it also synchronizes the write-buffer. Returns zero in case of
  * success and a negative error code in case of failure.
  */
-int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
-			  int deletion)
+int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
 {
-	int err, len, lnum, offs, sync = 0;
+	int err, lnum, offs;
 	struct ubifs_ino_node *ino;
 	struct ubifs_inode *ui = ubifs_inode(inode);
+	int sync = 0, len = UBIFS_INO_NODE_SZ, last_reference = !inode->i_nlink;
 
-	dbg_jnl("ino %lu%s", inode->i_ino,
-		deletion ? " (last reference)" : "");
-	if (deletion)
-		ubifs_assert(inode->i_nlink == 0);
+	dbg_jnl("ino %lu, nlink %u", inode->i_ino, inode->i_nlink);
 
-	len = UBIFS_INO_NODE_SZ;
 	/*
 	 * If the inode is being deleted, do not write the attached data. No
 	 * need to synchronize the write-buffer either.
 	 */
-	if (!deletion) {
+	if (!last_reference) {
 		len += ui->data_len;
 		sync = IS_SYNC(inode);
 	}
@@ -786,7 +780,7 @@ int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
 	if (err)
 		goto out_free;
 
-	pack_inode(c, ino, inode, 1, deletion);
+	pack_inode(c, ino, inode, 1);
 	err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync);
 	if (err)
 		goto out_release;
@@ -795,7 +789,7 @@ int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
 					  inode->i_ino);
 	release_head(c, BASEHD);
 
-	if (deletion) {
+	if (last_reference) {
 		err = ubifs_tnc_remove_ino(c, inode->i_ino);
 		if (err)
 			goto out_ro;
@@ -828,6 +822,65 @@ out_free:
 }
 
 /**
+ * ubifs_jnl_delete_inode - delete an inode.
+ * @c: UBIFS file-system description object
+ * @inode: inode to delete
+ *
+ * This function deletes inode @inode which includes removing it from orphans,
+ * deleting it from TNC and, in some cases, writing a deletion inode to the
+ * journal.
+ *
+ * When regular file inodes are unlinked or a directory inode is removed, the
+ * 'ubifs_jnl_update()' function writes a corresponding deletion inode and
+ * direntry to the media, and adds the inode to orphans. After this, when the
+ * last reference to this inode has been dropped, this function is called. In
+ * general, it has to write one more deletion inode to the media, because if
+ * a commit happened between 'ubifs_jnl_update()' and
+ * 'ubifs_jnl_delete_inode()', the deletion inode is not in the journal
+ * anymore, and in fact it might not be on the flash anymore, because it might
+ * have been garbage-collected already. And for optimization reasons UBIFS does
+ * not read the orphan area if it has been unmounted cleanly, so it would have
+ * no indication in the journal that there is a deleted inode which has to be
+ * removed from TNC.
+ *
+ * However, if there was no commit between 'ubifs_jnl_update()' and
+ * 'ubifs_jnl_delete_inode()', then there is no need to write the deletion
+ * inode to the media for the second time. And this is quite a typical case.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode)
+{
+	int err;
+	struct ubifs_inode *ui = ubifs_inode(inode);
+
+	ubifs_assert(inode->i_nlink == 0);
+
+	if (ui->del_cmtno != c->cmt_no)
+		/* A commit happened for sure */
+		return ubifs_jnl_write_inode(c, inode);
+
+	down_read(&c->commit_sem);
+	/*
+	 * Check commit number again, because the first test has been done
+	 * without @c->commit_sem, so a commit might have happened.
+	 */
+	if (ui->del_cmtno != c->cmt_no) {
+		up_read(&c->commit_sem);
+		return ubifs_jnl_write_inode(c, inode);
+	}
+
+	err = ubifs_tnc_remove_ino(c, inode->i_ino);
+	if (err)
+		ubifs_ro_mode(c, err);
+	else
+		ubifs_delete_orphan(c, inode->i_ino);
+	up_read(&c->commit_sem);
+	return err;
+}
+
+/**
  * ubifs_jnl_rename - rename a directory entry.
  * @c: UBIFS file-system description object
  * @old_dir: parent inode of directory entry to rename
@@ -917,16 +970,16 @@ int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
 
 	p = (void *)dent2 + aligned_dlen2;
 	if (new_inode) {
-		pack_inode(c, p, new_inode, 0, last_reference);
+		pack_inode(c, p, new_inode, 0);
 		p += ALIGN(ilen, 8);
 	}
 
 	if (!move)
-		pack_inode(c, p, old_dir, 1, 0);
+		pack_inode(c, p, old_dir, 1);
 	else {
-		pack_inode(c, p, old_dir, 0, 0);
+		pack_inode(c, p, old_dir, 0);
 		p += ALIGN(plen, 8);
-		pack_inode(c, p, new_dir, 1, 0);
+		pack_inode(c, p, new_dir, 1);
 	}
 
 	if (last_reference) {
@@ -935,6 +988,7 @@ int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
 			release_head(c, BASEHD);
 			goto out_finish;
 		}
+		new_ui->del_cmtno = c->cmt_no;
 	}
 
 	err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync);
@@ -1131,7 +1185,7 @@ int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode,
 	if (err)
 		goto out_free;
 
-	pack_inode(c, ino, inode, 0, 0);
+	pack_inode(c, ino, inode, 0);
 	ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1);
 	if (dlen)
 		ubifs_prep_grp_node(c, dn, dlen, 1);
@@ -1251,9 +1305,9 @@ int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host,
 	ubifs_prep_grp_node(c, xent, xlen, 0);
 
 	ino = (void *)xent + aligned_xlen;
-	pack_inode(c, ino, inode, 0, 1);
+	pack_inode(c, ino, inode, 0);
 	ino = (void *)ino + UBIFS_INO_NODE_SZ;
-	pack_inode(c, ino, host, 1, 0);
+	pack_inode(c, ino, host, 1);
 
 	err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync);
 	if (!sync && !err)
@@ -1320,7 +1374,7 @@ int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode,
 			   const struct inode *host)
 {
 	int err, len1, len2, aligned_len, aligned_len1, lnum, offs;
-	struct ubifs_inode *host_ui = ubifs_inode(inode);
+	struct ubifs_inode *host_ui = ubifs_inode(host);
 	struct ubifs_ino_node *ino;
 	union ubifs_key key;
 	int sync = IS_DIRSYNC(host);
@@ -1344,8 +1398,8 @@ int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode,
 	if (err)
 		goto out_free;
 
-	pack_inode(c, ino, host, 0, 0);
-	pack_inode(c, (void *)ino + aligned_len1, inode, 1, 0);
+	pack_inode(c, ino, host, 0);
+	pack_inode(c, (void *)ino + aligned_len1, inode, 1);
 
 	err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0);
 	if (!sync && !err) {
diff --git a/fs/ubifs/log.c b/fs/ubifs/log.c
index 36857b9ed59..3e0aa736755 100644
--- a/fs/ubifs/log.c
+++ b/fs/ubifs/log.c
@@ -317,6 +317,8 @@ int ubifs_add_bud_to_log(struct ubifs_info *c, int jhead, int lnum, int offs)
 	return 0;
 
 out_unlock:
+	if (err != -EAGAIN)
+		ubifs_ro_mode(c, err);
 	mutex_unlock(&c->log_mutex);
 	kfree(ref);
 	kfree(bud);
@@ -410,7 +412,7 @@ int ubifs_log_start_commit(struct ubifs_info *c, int *ltail_lnum)
 		return -ENOMEM;
 
 	cs->ch.node_type = UBIFS_CS_NODE;
-	cs->cmt_no = cpu_to_le64(c->cmt_no + 1);
+	cs->cmt_no = cpu_to_le64(c->cmt_no);
 	ubifs_prepare_node(c, cs, UBIFS_CS_NODE_SZ, 0);
 
 	/*
diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h
index 4beccfc256d..4c12a9215d7 100644
--- a/fs/ubifs/misc.h
+++ b/fs/ubifs/misc.h
@@ -80,20 +80,6 @@ static inline struct ubifs_inode *ubifs_inode(const struct inode *inode)
 }
 
 /**
- * ubifs_ro_mode - switch UBIFS to read read-only mode.
- * @c: UBIFS file-system description object
- * @err: error code which is the reason of switching to R/O mode
- */
-static inline void ubifs_ro_mode(struct ubifs_info *c, int err)
-{
-	if (!c->ro_media) {
-		c->ro_media = 1;
-		ubifs_warn("switched to read-only mode, error %d", err);
-		dbg_dump_stack();
-	}
-}
-
-/**
  * ubifs_compr_present - check if compressor was compiled in.
  * @compr_type: compressor type to check
  *
@@ -298,38 +284,6 @@ static inline void *ubifs_idx_key(const struct ubifs_info *c,
 }
 
 /**
- * ubifs_reported_space - calculate reported free space.
- * @c: the UBIFS file-system description object
- * @free: amount of free space
- *
- * This function calculates amount of free space which will be reported to
- * user-space. User-space application tend to expect that if the file-system
- * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
- * are able to write a file of size N. UBIFS attaches node headers to each data
- * node and it has to write indexind nodes as well. This introduces additional
- * overhead, and UBIFS it has to report sligtly less free space to meet the
- * above expectetion.
- *
- * This function assumes free space is made up of uncompressed data nodes and
- * full index nodes (one per data node, doubled because we always allow enough
- * space to write the index twice).
- *
- * Note, the calculation is pessimistic, which means that most of the time
- * UBIFS reports less space than it actually has.
- */
-static inline long long ubifs_reported_space(const struct ubifs_info *c,
-					     uint64_t free)
-{
-	int divisor, factor;
-
-	divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz << 1);
-	factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ;
-	do_div(free, divisor);
-
-	return free * factor;
-}
-
-/**
  * ubifs_current_time - round current time to time granularity.
  * @inode: inode
  */
@@ -339,4 +293,21 @@ static inline struct timespec ubifs_current_time(struct inode *inode)
 		current_fs_time(inode->i_sb) : CURRENT_TIME_SEC;
 }
 
+/**
+ * ubifs_tnc_lookup - look up a file-system node.
+ * @c: UBIFS file-system description object
+ * @key: node key to lookup
+ * @node: the node is returned here
+ *
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure.
+ */
+static inline int ubifs_tnc_lookup(struct ubifs_info *c,
+				   const union ubifs_key *key, void *node)
+{
+	return ubifs_tnc_locate(c, key, node, NULL, NULL);
+}
+
 #endif /* __UBIFS_MISC_H__ */
diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c
index 3afeb9242c6..02d3462f4d3 100644
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -310,10 +310,10 @@ static int write_orph_node(struct ubifs_info *c, int atomic)
 	c->cmt_orphans -= cnt;
 	spin_unlock(&c->orphan_lock);
 	if (c->cmt_orphans)
-		orph->cmt_no = cpu_to_le64(c->cmt_no + 1);
+		orph->cmt_no = cpu_to_le64(c->cmt_no);
 	else
 		/* Mark the last node of the commit */
-		orph->cmt_no = cpu_to_le64((c->cmt_no + 1) | (1ULL << 63));
+		orph->cmt_no = cpu_to_le64((c->cmt_no) | (1ULL << 63));
 	ubifs_assert(c->ohead_offs + len <= c->leb_size);
 	ubifs_assert(c->ohead_lnum >= c->orph_first);
 	ubifs_assert(c->ohead_lnum <= c->orph_last);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index ca1e2d4e03c..7562464ac83 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -30,7 +30,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/ctype.h>
-#include <linux/random.h>
 #include <linux/kthread.h>
 #include <linux/parser.h>
 #include <linux/seq_file.h>
@@ -149,7 +148,7 @@ struct inode *ubifs_iget(struct super_block *sb, unsigned long inum)
 	if (err)
 		goto out_invalid;
 
-	/* Disable readahead */
+	/* Disable read-ahead */
 	inode->i_mapping->backing_dev_info = &c->bdi;
 
 	switch (inode->i_mode & S_IFMT) {
@@ -278,7 +277,7 @@ static void ubifs_destroy_inode(struct inode *inode)
  */
 static int ubifs_write_inode(struct inode *inode, int wait)
 {
-	int err;
+	int err = 0;
 	struct ubifs_info *c = inode->i_sb->s_fs_info;
 	struct ubifs_inode *ui = ubifs_inode(inode);
 
@@ -299,10 +298,18 @@ static int ubifs_write_inode(struct inode *inode, int wait)
 		return 0;
 	}
 
-	dbg_gen("inode %lu", inode->i_ino);
-	err = ubifs_jnl_write_inode(c, inode, 0);
-	if (err)
-		ubifs_err("can't write inode %lu, error %d", inode->i_ino, err);
+	/*
+	 * As an optimization, do not write orphan inodes to the media just
+	 * because this is not needed.
+	 */
+	dbg_gen("inode %lu, mode %#x, nlink %u",
+		inode->i_ino, (int)inode->i_mode, inode->i_nlink);
+	if (inode->i_nlink) {
+		err = ubifs_jnl_write_inode(c, inode);
+		if (err)
+			ubifs_err("can't write inode %lu, error %d",
+				  inode->i_ino, err);
+	}
 
 	ui->dirty = 0;
 	mutex_unlock(&ui->ui_mutex);
@@ -314,8 +321,9 @@ static void ubifs_delete_inode(struct inode *inode)
 {
 	int err;
 	struct ubifs_info *c = inode->i_sb->s_fs_info;
+	struct ubifs_inode *ui = ubifs_inode(inode);
 
-	if (ubifs_inode(inode)->xattr)
+	if (ui->xattr)
 		/*
 		 * Extended attribute inode deletions are fully handled in
 		 * 'ubifs_removexattr()'. These inodes are special and have
@@ -323,7 +331,7 @@ static void ubifs_delete_inode(struct inode *inode)
 		 */
 		goto out;
 
-	dbg_gen("inode %lu", inode->i_ino);
+	dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode);
 	ubifs_assert(!atomic_read(&inode->i_count));
 	ubifs_assert(inode->i_nlink == 0);
 
@@ -331,15 +339,19 @@ static void ubifs_delete_inode(struct inode *inode)
 	if (is_bad_inode(inode))
 		goto out;
 
-	ubifs_inode(inode)->ui_size = inode->i_size = 0;
-	err = ubifs_jnl_write_inode(c, inode, 1);
+	ui->ui_size = inode->i_size = 0;
+	err = ubifs_jnl_delete_inode(c, inode);
 	if (err)
 		/*
 		 * Worst case we have a lost orphan inode wasting space, so a
-		 * simple error message is ok here.
+		 * simple error message is OK here.
 		 */
-		ubifs_err("can't write inode %lu, error %d", inode->i_ino, err);
+		ubifs_err("can't delete inode %lu, error %d",
+			  inode->i_ino, err);
+
 out:
+	if (ui->dirty)
+		ubifs_release_dirty_inode_budget(c, ui);
 	clear_inode(inode);
 }
 
@@ -358,8 +370,9 @@ static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf)
 {
 	struct ubifs_info *c = dentry->d_sb->s_fs_info;
 	unsigned long long free;
+	__le32 *uuid = (__le32 *)c->uuid;
 
-	free = ubifs_budg_get_free_space(c);
+	free = ubifs_get_free_space(c);
 	dbg_gen("free space %lld bytes (%lld blocks)",
 		free, free >> UBIFS_BLOCK_SHIFT);
 
@@ -374,7 +387,8 @@ static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	buf->f_files = 0;
 	buf->f_ffree = 0;
 	buf->f_namelen = UBIFS_MAX_NLEN;
-
+	buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]);
+	buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]);
 	return 0;
 }
 
@@ -518,6 +532,12 @@ static int init_constants_early(struct ubifs_info *c)
 	c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size);
 	c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size);
 
+	/*
+	 * Calculate how many bytes would be wasted at the end of LEB if it was
+	 * fully filled with data nodes of maximum size. This is used in
+	 * calculations when reporting free space.
+	 */
+	c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ;
 	return 0;
 }
 
@@ -635,13 +655,11 @@ static int init_constants_late(struct ubifs_info *c)
 	 * internally because it does not make much sense for UBIFS, but it is
 	 * necessary to report something for the 'statfs()' call.
 	 *
-	 * Subtract the LEB reserved for GC and the LEB which is reserved for
-	 * deletions.
-	 *
-	 * Review 'ubifs_calc_available()' if changing this calculation.
+	 * Subtract the LEB reserved for GC, the LEB which is reserved for
+	 * deletions, and assume only one journal head is available.
 	 */
-	tmp64 = c->main_lebs - 2;
-	tmp64 *= (uint64_t)c->leb_size - c->dark_wm;
+	tmp64 = c->main_lebs - 2 - c->jhead_cnt + 1;
+	tmp64 *= (uint64_t)c->leb_size - c->leb_overhead;
 	tmp64 = ubifs_reported_space(c, tmp64);
 	c->block_cnt = tmp64 >> UBIFS_BLOCK_SHIFT;
 
@@ -1122,8 +1140,8 @@ static int mount_ubifs(struct ubifs_info *c)
 	if (err)
 		goto out_infos;
 
-	ubifs_msg("mounted UBI device %d, volume %d", c->vi.ubi_num,
-		  c->vi.vol_id);
+	ubifs_msg("mounted UBI device %d, volume %d, name \"%s\"",
+		  c->vi.ubi_num, c->vi.vol_id, c->vi.name);
 	if (mounted_read_only)
 		ubifs_msg("mounted read-only");
 	x = (long long)c->main_lebs * c->leb_size;
@@ -1469,6 +1487,7 @@ static void ubifs_put_super(struct super_block *sb)
 	 */
 	ubifs_assert(atomic_long_read(&c->dirty_pg_cnt) == 0);
 	ubifs_assert(c->budg_idx_growth == 0);
+	ubifs_assert(c->budg_dd_growth == 0);
 	ubifs_assert(c->budg_data_growth == 0);
 
 	/*
@@ -1657,7 +1676,6 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
 	INIT_LIST_HEAD(&c->orph_new);
 
 	c->highest_inum = UBIFS_FIRST_INO;
-	get_random_bytes(&c->vfs_gen, sizeof(int));
 	c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM;
 
 	ubi_get_volume_info(ubi, &c->vi);
@@ -1671,10 +1689,10 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
 	}
 
 	/*
-	 * UBIFS provids 'backing_dev_info' in order to disable readahead. For
+	 * UBIFS provides 'backing_dev_info' in order to disable read-ahead. For
 	 * UBIFS, I/O is not deferred, it is done immediately in readpage,
 	 * which means the user would have to wait not just for their own I/O
-	 * but the readahead I/O as well i.e. completely pointless.
+	 * but the read-ahead I/O as well i.e. completely pointless.
 	 *
 	 * Read-ahead will be disabled because @c->bdi.ra_pages is 0.
 	 */
diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c
index e909f4a9644..7da209ab937 100644
--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -506,7 +506,7 @@ static int fallible_read_node(struct ubifs_info *c, const union ubifs_key *key,
 		if (keys_cmp(c, key, &node_key) != 0)
 			ret = 0;
 	}
-	if (ret == 0)
+	if (ret == 0 && c->replaying)
 		dbg_mnt("dangling branch LEB %d:%d len %d, key %s",
 			zbr->lnum, zbr->offs, zbr->len, DBGKEY(key));
 	return ret;
@@ -1382,50 +1382,39 @@ static int lookup_level0_dirty(struct ubifs_info *c, const union ubifs_key *key,
 }
 
 /**
- * ubifs_tnc_lookup - look up a file-system node.
+ * maybe_leb_gced - determine if a LEB may have been garbage collected.
  * @c: UBIFS file-system description object
- * @key: node key to lookup
- * @node: the node is returned here
+ * @lnum: LEB number
+ * @gc_seq1: garbage collection sequence number
  *
- * This function look up and reads node with key @key. The caller has to make
- * sure the @node buffer is large enough to fit the node. Returns zero in case
- * of success, %-ENOENT if the node was not found, and a negative error code in
- * case of failure.
+ * This function determines if @lnum may have been garbage collected since
+ * sequence number @gc_seq1. If it may have been then %1 is returned, otherwise
+ * %0 is returned.
  */
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
-		     void *node)
+static int maybe_leb_gced(struct ubifs_info *c, int lnum, int gc_seq1)
 {
-	int found, n, err;
-	struct ubifs_znode *znode;
-	struct ubifs_zbranch zbr, *zt;
+	int gc_seq2, gced_lnum;
 
-	mutex_lock(&c->tnc_mutex);
-	found = ubifs_lookup_level0(c, key, &znode, &n);
-	if (!found) {
-		err = -ENOENT;
-		goto out;
-	} else if (found < 0) {
-		err = found;
-		goto out;
-	}
-	zt = &znode->zbranch[n];
-	if (is_hash_key(c, key)) {
-		/*
-		 * In this case the leaf node cache gets used, so we pass the
-		 * address of the zbranch and keep the mutex locked
-		 */
-		err = tnc_read_node_nm(c, zt, node);
-		goto out;
-	}
-	zbr = znode->zbranch[n];
-	mutex_unlock(&c->tnc_mutex);
-
-	err = ubifs_tnc_read_node(c, &zbr, node);
-	return err;
-
-out:
-	mutex_unlock(&c->tnc_mutex);
-	return err;
+	gced_lnum = c->gced_lnum;
+	smp_rmb();
+	gc_seq2 = c->gc_seq;
+	/* Same seq means no GC */
+	if (gc_seq1 == gc_seq2)
+		return 0;
+	/* Different by more than 1 means we don't know */
+	if (gc_seq1 + 1 != gc_seq2)
+		return 1;
+	/*
+	 * We have seen the sequence number has increased by 1. Now we need to
+	 * be sure we read the right LEB number, so read it again.
+	 */
+	smp_rmb();
+	if (gced_lnum != c->gced_lnum)
+		return 1;
+	/* Finally we can check lnum */
+	if (gced_lnum == lnum)
+		return 1;
+	return 0;
 }
 
 /**
@@ -1436,16 +1425,19 @@ out:
  * @lnum: LEB number is returned here
  * @offs: offset is returned here
  *
- * This function is the same as 'ubifs_tnc_lookup()' but it returns the node
- * location also. See 'ubifs_tnc_lookup()'.
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure. The node location can be returned in @lnum and @offs.
  */
 int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
 		     void *node, int *lnum, int *offs)
 {
-	int found, n, err;
+	int found, n, err, safely = 0, gc_seq1;
 	struct ubifs_znode *znode;
 	struct ubifs_zbranch zbr, *zt;
 
+again:
 	mutex_lock(&c->tnc_mutex);
 	found = ubifs_lookup_level0(c, key, &znode, &n);
 	if (!found) {
@@ -1456,24 +1448,43 @@ int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
 		goto out;
 	}
 	zt = &znode->zbranch[n];
+	if (lnum) {
+		*lnum = zt->lnum;
+		*offs = zt->offs;
+	}
 	if (is_hash_key(c, key)) {
 		/*
 		 * In this case the leaf node cache gets used, so we pass the
 		 * address of the zbranch and keep the mutex locked
 		 */
-		*lnum = zt->lnum;
-		*offs = zt->offs;
 		err = tnc_read_node_nm(c, zt, node);
 		goto out;
 	}
+	if (safely) {
+		err = ubifs_tnc_read_node(c, zt, node);
+		goto out;
+	}
+	/* Drop the TNC mutex prematurely and race with garbage collection */
 	zbr = znode->zbranch[n];
+	gc_seq1 = c->gc_seq;
 	mutex_unlock(&c->tnc_mutex);
 
-	*lnum = zbr.lnum;
-	*offs = zbr.offs;
+	if (ubifs_get_wbuf(c, zbr.lnum)) {
+		/* We do not GC journal heads */
+		err = ubifs_tnc_read_node(c, &zbr, node);
+		return err;
+	}
 
-	err = ubifs_tnc_read_node(c, &zbr, node);
-	return err;
+	err = fallible_read_node(c, key, &zbr, node);
+	if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
+		/*
+		 * The node may have been GC'ed out from under us so try again
+		 * while keeping the TNC mutex locked.
+		 */
+		safely = 1;
+		goto again;
+	}
+	return 0;
 
 out:
 	mutex_unlock(&c->tnc_mutex);
@@ -1498,7 +1509,6 @@ static int do_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
 {
 	int found, n, err;
 	struct ubifs_znode *znode;
-	struct ubifs_zbranch zbr;
 
 	dbg_tnc("name '%.*s' key %s", nm->len, nm->name, DBGKEY(key));
 	mutex_lock(&c->tnc_mutex);
@@ -1522,11 +1532,7 @@ static int do_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
 		goto out_unlock;
 	}
 
-	zbr = znode->zbranch[n];
-	mutex_unlock(&c->tnc_mutex);
-
-	err = tnc_read_node_nm(c, &zbr, node);
-	return err;
+	err = tnc_read_node_nm(c, &znode->zbranch[n], node);
 
 out_unlock:
 	mutex_unlock(&c->tnc_mutex);
diff --git a/fs/ubifs/tnc_commit.c b/fs/ubifs/tnc_commit.c
index 8117e65ba2e..8ac76b1c2d5 100644
--- a/fs/ubifs/tnc_commit.c
+++ b/fs/ubifs/tnc_commit.c
@@ -372,26 +372,25 @@ static int layout_in_gaps(struct ubifs_info *c, int cnt)
 		written = layout_leb_in_gaps(c, p);
 		if (written < 0) {
 			err = written;
-			if (err == -ENOSPC) {
-				if (!dbg_force_in_the_gaps_enabled) {
-					/*
-					 * Do not print scary warnings if the
-					 * debugging option which forces
-					 * in-the-gaps is enabled.
-					 */
-					ubifs_err("out of space");
-					spin_lock(&c->space_lock);
-					dbg_dump_budg(c);
-					spin_unlock(&c->space_lock);
-					dbg_dump_lprops(c);
-				}
-				/* Try to commit anyway */
-				err = 0;
-				break;
+			if (err != -ENOSPC) {
+				kfree(c->gap_lebs);
+				c->gap_lebs = NULL;
+				return err;
 			}
-			kfree(c->gap_lebs);
-			c->gap_lebs = NULL;
-			return err;
+			if (!dbg_force_in_the_gaps_enabled) {
+				/*
+				 * Do not print scary warnings if the debugging
+				 * option which forces in-the-gaps is enabled.
+				 */
+				ubifs_err("out of space");
+				spin_lock(&c->space_lock);
+				dbg_dump_budg(c);
+				spin_unlock(&c->space_lock);
+				dbg_dump_lprops(c);
+			}
+			/* Try to commit anyway */
+			err = 0;
+			break;
 		}
 		p++;
 		cnt -= written;
diff --git a/fs/ubifs/ubifs-media.h b/fs/ubifs/ubifs-media.h
index 0cc7da9bed4..a9ecbd9af20 100644
--- a/fs/ubifs/ubifs-media.h
+++ b/fs/ubifs/ubifs-media.h
@@ -87,7 +87,7 @@
 #define UBIFS_SK_LEN 8
 
 /* Minimum index tree fanout */
-#define UBIFS_MIN_FANOUT 2
+#define UBIFS_MIN_FANOUT 3
 
 /* Maximum number of levels in UBIFS indexing B-tree */
 #define UBIFS_MAX_LEVELS 512
@@ -228,10 +228,10 @@ enum {
 /* Minimum number of orphan area logical eraseblocks */
 #define UBIFS_MIN_ORPH_LEBS 1
 /*
- * Minimum number of main area logical eraseblocks (buds, 2 for the index, 1
+ * Minimum number of main area logical eraseblocks (buds, 3 for the index, 1
  * for GC, 1 for deletions, and at least 1 for committed data).
  */
-#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 5)
+#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 6)
 
 /* Minimum number of logical eraseblocks */
 #define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index e4f89f27182..17c620b93ee 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -20,8 +20,6 @@
  *          Adrian Hunter
  */
 
-/* Implementation version 0.7 */
-
 #ifndef __UBIFS_H__
 #define __UBIFS_H__
 
@@ -322,6 +320,8 @@ struct ubifs_gced_idx_leb {
  * struct ubifs_inode - UBIFS in-memory inode description.
  * @vfs_inode: VFS inode description object
  * @creat_sqnum: sequence number at time of creation
+ * @del_cmtno: commit number corresponding to the time the inode was deleted,
+ *             protected by @c->commit_sem;
  * @xattr_size: summarized size of all extended attributes in bytes
  * @xattr_cnt: count of extended attributes this inode has
  * @xattr_names: sum of lengths of all extended attribute names belonging to
@@ -373,6 +373,7 @@ struct ubifs_gced_idx_leb {
 struct ubifs_inode {
 	struct inode vfs_inode;
 	unsigned long long creat_sqnum;
+	unsigned long long del_cmtno;
 	unsigned int xattr_size;
 	unsigned int xattr_cnt;
 	unsigned int xattr_names;
@@ -779,7 +780,7 @@ struct ubifs_compressor {
 /**
  * struct ubifs_budget_req - budget requirements of an operation.
  *
- * @fast: non-zero if the budgeting should try to aquire budget quickly and
+ * @fast: non-zero if the budgeting should try to acquire budget quickly and
  *        should not try to call write-back
  * @recalculate: non-zero if @idx_growth, @data_growth, and @dd_growth fields
  *               have to be re-calculated
@@ -805,21 +806,31 @@ struct ubifs_compressor {
  * An inode may contain 4KiB of data at max., thus the widths of @new_ino_d
  * is 13 bits, and @dirtied_ino_d - 15, because up to 4 inodes may be made
  * dirty by the re-name operation.
+ *
+ * Note, UBIFS aligns node lengths to 8-bytes boundary, so the requester has to
+ * make sure the amount of inode data which contribute to @new_ino_d and
+ * @dirtied_ino_d fields are aligned.
  */
 struct ubifs_budget_req {
 	unsigned int fast:1;
 	unsigned int recalculate:1;
+#ifndef UBIFS_DEBUG
 	unsigned int new_page:1;
 	unsigned int dirtied_page:1;
 	unsigned int new_dent:1;
 	unsigned int mod_dent:1;
 	unsigned int new_ino:1;
 	unsigned int new_ino_d:13;
-#ifndef UBIFS_DEBUG
 	unsigned int dirtied_ino:4;
 	unsigned int dirtied_ino_d:15;
 #else
 	/* Not bit-fields to check for overflows */
+	unsigned int new_page;
+	unsigned int dirtied_page;
+	unsigned int new_dent;
+	unsigned int mod_dent;
+	unsigned int new_ino;
+	unsigned int new_ino_d;
 	unsigned int dirtied_ino;
 	unsigned int dirtied_ino_d;
 #endif
@@ -860,13 +871,13 @@ struct ubifs_mount_opts {
  * struct ubifs_info - UBIFS file-system description data structure
  * (per-superblock).
  * @vfs_sb: VFS @struct super_block object
- * @bdi: backing device info object to make VFS happy and disable readahead
+ * @bdi: backing device info object to make VFS happy and disable read-ahead
  *
  * @highest_inum: highest used inode number
- * @vfs_gen: VFS inode generation counter
  * @max_sqnum: current global sequence number
- * @cmt_no: commit number (last successfully completed commit)
- * @cnt_lock: protects @highest_inum, @vfs_gen, and @max_sqnum counters
+ * @cmt_no: commit number of the last successfully completed commit, protected
+ *          by @commit_sem
+ * @cnt_lock: protects @highest_inum and @max_sqnum counters
  * @fmt_version: UBIFS on-flash format version
  * @uuid: UUID from super block
  *
@@ -984,6 +995,9 @@ struct ubifs_mount_opts {
  * @max_idx_node_sz: maximum indexing node aligned on 8-bytes boundary
  * @max_inode_sz: maximum possible inode size in bytes
  * @max_znode_sz: size of znode in bytes
+ *
+ * @leb_overhead: how many bytes are wasted in an LEB when it is filled with
+ *                data nodes of maximum size - used in free space reporting
  * @dead_wm: LEB dead space watermark
  * @dark_wm: LEB dark space watermark
  * @block_cnt: count of 4KiB blocks on the FS
@@ -1017,6 +1031,8 @@ struct ubifs_mount_opts {
  * @sbuf: a buffer of LEB size used by GC and replay for scanning
  * @idx_gc: list of index LEBs that have been garbage collected
  * @idx_gc_cnt: number of elements on the idx_gc list
+ * @gc_seq: incremented for every non-index LEB garbage collected
+ * @gced_lnum: last non-index LEB that was garbage collected
  *
  * @infos_list: links all 'ubifs_info' objects
  * @umount_mutex: serializes shrinker and un-mount
@@ -1103,7 +1119,6 @@ struct ubifs_info {
 	struct backing_dev_info bdi;
 
 	ino_t highest_inum;
-	unsigned int vfs_gen;
 	unsigned long long max_sqnum;
 	unsigned long long cmt_no;
 	spinlock_t cnt_lock;
@@ -1214,6 +1229,8 @@ struct ubifs_info {
 	int max_idx_node_sz;
 	long long max_inode_sz;
 	int max_znode_sz;
+
+	int leb_overhead;
 	int dead_wm;
 	int dark_wm;
 	int block_cnt;
@@ -1247,6 +1264,8 @@ struct ubifs_info {
 	void *sbuf;
 	struct list_head idx_gc;
 	int idx_gc_cnt;
+	volatile int gc_seq;
+	volatile int gced_lnum;
 
 	struct list_head infos_list;
 	struct mutex umount_mutex;
@@ -1346,6 +1365,7 @@ extern struct backing_dev_info ubifs_backing_dev_info;
 extern struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
 
 /* io.c */
+void ubifs_ro_mode(struct ubifs_info *c, int err);
 int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len);
 int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs,
 			   int dtype);
@@ -1399,8 +1419,8 @@ int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir,
 		     int deletion, int xent);
 int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode,
 			 const union ubifs_key *key, const void *buf, int len);
-int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
-			  int last_reference);
+int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode);
+int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode);
 int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
 		     const struct dentry *old_dentry,
 		     const struct inode *new_dir,
@@ -1423,9 +1443,10 @@ void ubifs_release_ino_dirty(struct ubifs_info *c, struct inode *inode,
 				struct ubifs_budget_req *req);
 void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode,
 			 struct ubifs_budget_req *req);
-long long ubifs_budg_get_free_space(struct ubifs_info *c);
+long long ubifs_get_free_space(struct ubifs_info *c);
 int ubifs_calc_min_idx_lebs(struct ubifs_info *c);
 void ubifs_convert_page_budget(struct ubifs_info *c);
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free);
 long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs);
 
 /* find.c */
@@ -1440,8 +1461,6 @@ int ubifs_save_dirty_idx_lnums(struct ubifs_info *c);
 /* tnc.c */
 int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key,
 			struct ubifs_znode **zn, int *n);
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
-		     void *node);
 int ubifs_tnc_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
 			void *node, const struct qstr *nm);
 int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index 1388a078e1a..649bec78b64 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -61,7 +61,7 @@
 
 /*
  * Limit the number of extended attributes per inode so that the total size
- * (xattr_size) is guaranteeded to fit in an 'unsigned int'.
+ * (@xattr_size) is guaranteeded to fit in an 'unsigned int'.
  */
 #define MAX_XATTRS_PER_INODE 65535
 
@@ -103,14 +103,14 @@ static int create_xattr(struct ubifs_info *c, struct inode *host,
 	struct inode *inode;
 	struct ubifs_inode *ui, *host_ui = ubifs_inode(host);
 	struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
-					.new_ino_d = size, .dirtied_ino = 1,
-					.dirtied_ino_d = host_ui->data_len};
+				.new_ino_d = ALIGN(size, 8), .dirtied_ino = 1,
+				.dirtied_ino_d = ALIGN(host_ui->data_len, 8) };
 
 	if (host_ui->xattr_cnt >= MAX_XATTRS_PER_INODE)
 		return -ENOSPC;
 	/*
 	 * Linux limits the maximum size of the extended attribute names list
-	 * to %XATTR_LIST_MAX. This means we should not allow creating more*
+	 * to %XATTR_LIST_MAX. This means we should not allow creating more
 	 * extended attributes if the name list becomes larger. This limitation
 	 * is artificial for UBIFS, though.
 	 */
@@ -128,7 +128,6 @@ static int create_xattr(struct ubifs_info *c, struct inode *host,
 		goto out_budg;
 	}
 
-	mutex_lock(&host_ui->ui_mutex);
 	/* Re-define all operations to be "nothing" */
 	inode->i_mapping->a_ops = &none_address_operations;
 	inode->i_op = &none_inode_operations;
@@ -141,23 +140,19 @@ static int create_xattr(struct ubifs_info *c, struct inode *host,
 	ui->data = kmalloc(size, GFP_NOFS);
 	if (!ui->data) {
 		err = -ENOMEM;
-		goto out_unlock;
+		goto out_free;
 	}
-
 	memcpy(ui->data, value, size);
+	inode->i_size = ui->ui_size = size;
+	ui->data_len = size;
+
+	mutex_lock(&host_ui->ui_mutex);
 	host->i_ctime = ubifs_current_time(host);
 	host_ui->xattr_cnt += 1;
 	host_ui->xattr_size += CALC_DENT_SIZE(nm->len);
 	host_ui->xattr_size += CALC_XATTR_BYTES(size);
 	host_ui->xattr_names += nm->len;
 
-	/*
-	 * We do not use i_size_write() because nobody can race with us as we
-	 * are holding host @host->i_mutex - every xattr operation for this
-	 * inode is serialized by it.
-	 */
-	inode->i_size = ui->ui_size = size;
-	ui->data_len = size;
 	err = ubifs_jnl_update(c, host, nm, inode, 0, 1);
 	if (err)
 		goto out_cancel;
@@ -172,8 +167,8 @@ out_cancel:
 	host_ui->xattr_cnt -= 1;
 	host_ui->xattr_size -= CALC_DENT_SIZE(nm->len);
 	host_ui->xattr_size -= CALC_XATTR_BYTES(size);
-out_unlock:
 	mutex_unlock(&host_ui->ui_mutex);
+out_free:
 	make_bad_inode(inode);
 	iput(inode);
 out_budg:
@@ -200,29 +195,28 @@ static int change_xattr(struct ubifs_info *c, struct inode *host,
 	struct ubifs_inode *host_ui = ubifs_inode(host);
 	struct ubifs_inode *ui = ubifs_inode(inode);
 	struct ubifs_budget_req req = { .dirtied_ino = 2,
-				.dirtied_ino_d = size + host_ui->data_len };
+		.dirtied_ino_d = ALIGN(size, 8) + ALIGN(host_ui->data_len, 8) };
 
 	ubifs_assert(ui->data_len == inode->i_size);
 	err = ubifs_budget_space(c, &req);
 	if (err)
 		return err;
 
-	mutex_lock(&host_ui->ui_mutex);
-	host->i_ctime = ubifs_current_time(host);
-	host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
-	host_ui->xattr_size += CALC_XATTR_BYTES(size);
-
 	kfree(ui->data);
 	ui->data = kmalloc(size, GFP_NOFS);
 	if (!ui->data) {
 		err = -ENOMEM;
-		goto out_unlock;
+		goto out_free;
 	}
-
 	memcpy(ui->data, value, size);
 	inode->i_size = ui->ui_size = size;
 	ui->data_len = size;
 
+	mutex_lock(&host_ui->ui_mutex);
+	host->i_ctime = ubifs_current_time(host);
+	host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
+	host_ui->xattr_size += CALC_XATTR_BYTES(size);
+
 	/*
 	 * It is important to write the host inode after the xattr inode
 	 * because if the host inode gets synchronized (via 'fsync()'), then
@@ -240,9 +234,9 @@ static int change_xattr(struct ubifs_info *c, struct inode *host,
 out_cancel:
 	host_ui->xattr_size -= CALC_XATTR_BYTES(size);
 	host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len);
-	make_bad_inode(inode);
-out_unlock:
 	mutex_unlock(&host_ui->ui_mutex);
+	make_bad_inode(inode);
+out_free:
 	ubifs_release_budget(c, &req);
 	return err;
 }
@@ -312,6 +306,7 @@ int ubifs_setxattr(struct dentry *dentry, const char *name,
 
 	dbg_gen("xattr '%s', host ino %lu ('%.*s'), size %zd", name,
 		host->i_ino, dentry->d_name.len, dentry->d_name.name, size);
+	ubifs_assert(mutex_is_locked(&host->i_mutex));
 
 	if (size > UBIFS_MAX_INO_DATA)
 		return -ERANGE;
@@ -384,7 +379,6 @@ ssize_t ubifs_getxattr(struct dentry *dentry, const char *name, void *buf,
 	if (!xent)
 		return -ENOMEM;
 
-	mutex_lock(&host->i_mutex);
 	xent_key_init(c, &key, host->i_ino, &nm);
 	err = ubifs_tnc_lookup_nm(c, &key, xent, &nm);
 	if (err) {
@@ -419,7 +413,6 @@ ssize_t ubifs_getxattr(struct dentry *dentry, const char *name, void *buf,
 out_iput:
 	iput(inode);
 out_unlock:
-	mutex_unlock(&host->i_mutex);
 	kfree(xent);
 	return err;
 }
@@ -449,8 +442,6 @@ ssize_t ubifs_listxattr(struct dentry *dentry, char *buffer, size_t size)
 		return -ERANGE;
 
 	lowest_xent_key(c, &key, host->i_ino);
-
-	mutex_lock(&host->i_mutex);
 	while (1) {
 		int type;
 
@@ -479,7 +470,6 @@ ssize_t ubifs_listxattr(struct dentry *dentry, char *buffer, size_t size)
 		pxent = xent;
 		key_read(c, &xent->key, &key);
 	}
-	mutex_unlock(&host->i_mutex);
 
 	kfree(pxent);
 	if (err != -ENOENT) {
@@ -497,8 +487,8 @@ static int remove_xattr(struct ubifs_info *c, struct inode *host,
 	int err;
 	struct ubifs_inode *host_ui = ubifs_inode(host);
 	struct ubifs_inode *ui = ubifs_inode(inode);
-	struct ubifs_budget_req req = { .dirtied_ino = 1, .mod_dent = 1,
-					.dirtied_ino_d = host_ui->data_len };
+	struct ubifs_budget_req req = { .dirtied_ino = 2, .mod_dent = 1,
+				.dirtied_ino_d = ALIGN(host_ui->data_len, 8) };
 
 	ubifs_assert(ui->data_len == inode->i_size);
 
diff --git a/fs/udf/file.c b/fs/udf/file.c
index 0ed6e146a0d..eb91f3b7032 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -211,6 +211,7 @@ const struct file_operations udf_file_operations = {
 	.release		= udf_release_file,
 	.fsync			= udf_fsync_file,
 	.splice_read		= generic_file_splice_read,
+	.llseek			= generic_file_llseek,
 };
 
 const struct inode_operations udf_file_inode_operations = {
diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c
index eb9cfa23dc3..a4f2b3ce45b 100644
--- a/fs/udf/ialloc.c
+++ b/fs/udf/ialloc.c
@@ -76,11 +76,24 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 	*err = -ENOSPC;
 
 	iinfo = UDF_I(inode);
-	iinfo->i_unique = 0;
-	iinfo->i_lenExtents = 0;
-	iinfo->i_next_alloc_block = 0;
-	iinfo->i_next_alloc_goal = 0;
-	iinfo->i_strat4096 = 0;
+	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
+		iinfo->i_efe = 1;
+		if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
+			sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
+		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+					    sizeof(struct extendedFileEntry),
+					    GFP_KERNEL);
+	} else {
+		iinfo->i_efe = 0;
+		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+					    sizeof(struct fileEntry),
+					    GFP_KERNEL);
+	}
+	if (!iinfo->i_ext.i_data) {
+		iput(inode);
+		*err = -ENOMEM;
+		return NULL;
+	}
 
 	block = udf_new_block(dir->i_sb, NULL,
 			      dinfo->i_location.partitionReferenceNum,
@@ -111,6 +124,7 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 		lvhd->uniqueID = cpu_to_le64(uniqueID);
 		mark_buffer_dirty(sbi->s_lvid_bh);
 	}
+	mutex_unlock(&sbi->s_alloc_mutex);
 	inode->i_mode = mode;
 	inode->i_uid = current->fsuid;
 	if (dir->i_mode & S_ISGID) {
@@ -129,25 +143,6 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 	iinfo->i_lenEAttr = 0;
 	iinfo->i_lenAlloc = 0;
 	iinfo->i_use = 0;
-	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
-		iinfo->i_efe = 1;
-		if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
-			sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
-		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
-					    sizeof(struct extendedFileEntry),
-					    GFP_KERNEL);
-	} else {
-		iinfo->i_efe = 0;
-		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
-					    sizeof(struct fileEntry),
-					    GFP_KERNEL);
-	}
-	if (!iinfo->i_ext.i_data) {
-		iput(inode);
-		*err = -ENOMEM;
-		mutex_unlock(&sbi->s_alloc_mutex);
-		return NULL;
-	}
 	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
 		iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
 	else if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
@@ -158,7 +153,6 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 		iinfo->i_crtime = current_fs_time(inode->i_sb);
 	insert_inode_hash(inode);
 	mark_inode_dirty(inode);
-	mutex_unlock(&sbi->s_alloc_mutex);
 
 	if (DQUOT_ALLOC_INODE(inode)) {
 		DQUOT_DROP(inode);
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 3e30e40aa24..3141969b456 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -1233,7 +1233,7 @@ static int ufs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 {
 	struct ufs_sb_info *sbi = UFS_SB(vfs->mnt_sb);
 	unsigned mval = sbi->s_mount_opt & UFS_MOUNT_UFSTYPE;
-	const struct match_token *tp = tokens;
+	struct match_token *tp = tokens;
 
 	while (tp->token != Opt_onerror_panic && tp->token != mval)
 		++tp;
diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile
index 36ec614e699..737c9a42536 100644
--- a/fs/xfs/Makefile
+++ b/fs/xfs/Makefile
@@ -106,7 +106,8 @@ xfs-y				+= $(addprefix $(XFS_LINUX)/, \
 				   xfs_iops.o \
 				   xfs_lrw.o \
 				   xfs_super.o \
-				   xfs_vnode.o)
+				   xfs_vnode.o \
+				   xfs_xattr.o)
 
 # Objects in support/
 xfs-y				+= $(addprefix support/, \
diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c
index 9b1bb17a050..1cd3b55ee3d 100644
--- a/fs/xfs/linux-2.6/kmem.c
+++ b/fs/xfs/linux-2.6/kmem.c
@@ -90,7 +90,7 @@ kmem_zalloc_greedy(size_t *size, size_t minsize, size_t maxsize,
 }
 
 void
-kmem_free(void *ptr, size_t size)
+kmem_free(const void *ptr)
 {
 	if (!is_vmalloc_addr(ptr)) {
 		kfree(ptr);
@@ -100,7 +100,7 @@ kmem_free(void *ptr, size_t size)
 }
 
 void *
-kmem_realloc(void *ptr, size_t newsize, size_t oldsize,
+kmem_realloc(const void *ptr, size_t newsize, size_t oldsize,
 	     unsigned int __nocast flags)
 {
 	void	*new;
@@ -110,7 +110,7 @@ kmem_realloc(void *ptr, size_t newsize, size_t oldsize,
 		if (new)
 			memcpy(new, ptr,
 				((oldsize < newsize) ? oldsize : newsize));
-		kmem_free(ptr, oldsize);
+		kmem_free(ptr);
 	}
 	return new;
 }
diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h
index a20683cf74d..af6843c7ee4 100644
--- a/fs/xfs/linux-2.6/kmem.h
+++ b/fs/xfs/linux-2.6/kmem.h
@@ -57,8 +57,8 @@ kmem_flags_convert(unsigned int __nocast flags)
 extern void *kmem_alloc(size_t, unsigned int __nocast);
 extern void *kmem_zalloc(size_t, unsigned int __nocast);
 extern void *kmem_zalloc_greedy(size_t *, size_t, size_t, unsigned int __nocast);
-extern void *kmem_realloc(void *, size_t, size_t, unsigned int __nocast);
-extern void  kmem_free(void *, size_t);
+extern void *kmem_realloc(const void *, size_t, size_t, unsigned int __nocast);
+extern void  kmem_free(const void *);
 
 /*
  * Zone interfaces
diff --git a/fs/xfs/linux-2.6/sema.h b/fs/xfs/linux-2.6/sema.h
deleted file mode 100644
index 3abe7e9ceb3..00000000000
--- a/fs/xfs/linux-2.6/sema.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (c) 2000-2002,2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef __XFS_SUPPORT_SEMA_H__
-#define __XFS_SUPPORT_SEMA_H__
-
-#include <linux/time.h>
-#include <linux/wait.h>
-#include <linux/semaphore.h>
-#include <asm/atomic.h>
-
-/*
- * sema_t structure just maps to struct semaphore in Linux kernel.
- */
-
-typedef struct semaphore sema_t;
-
-#define initnsema(sp, val, name)	sema_init(sp, val)
-#define psema(sp, b)			down(sp)
-#define vsema(sp)			up(sp)
-#define freesema(sema)			do { } while (0)
-
-static inline int issemalocked(sema_t *sp)
-{
-	return down_trylock(sp) || (up(sp), 0);
-}
-
-/*
- * Map cpsema (try to get the sema) to down_trylock. We need to switch
- * the return values since cpsema returns 1 (acquired) 0 (failed) and
- * down_trylock returns the reverse 0 (acquired) 1 (failed).
- */
-static inline int cpsema(sema_t *sp)
-{
-	return down_trylock(sp) ? 0 : 1;
-}
-
-#endif /* __XFS_SUPPORT_SEMA_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index a55c3b26d84..a44d68eb50b 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -73,7 +73,6 @@ xfs_page_trace(
 	unsigned long	pgoff)
 {
 	xfs_inode_t	*ip;
-	bhv_vnode_t	*vp = vn_from_inode(inode);
 	loff_t		isize = i_size_read(inode);
 	loff_t		offset = page_offset(page);
 	int		delalloc = -1, unmapped = -1, unwritten = -1;
@@ -81,7 +80,7 @@ xfs_page_trace(
 	if (page_has_buffers(page))
 		xfs_count_page_state(page, &delalloc, &unmapped, &unwritten);
 
-	ip = xfs_vtoi(vp);
+	ip = XFS_I(inode);
 	if (!ip->i_rwtrace)
 		return;
 
@@ -409,7 +408,6 @@ xfs_start_buffer_writeback(
 STATIC void
 xfs_start_page_writeback(
 	struct page		*page,
-	struct writeback_control *wbc,
 	int			clear_dirty,
 	int			buffers)
 {
@@ -676,7 +674,7 @@ xfs_probe_cluster(
 			} else
 				pg_offset = PAGE_CACHE_SIZE;
 
-			if (page->index == tindex && !TestSetPageLocked(page)) {
+			if (page->index == tindex && trylock_page(page)) {
 				pg_len = xfs_probe_page(page, pg_offset, mapped);
 				unlock_page(page);
 			}
@@ -760,7 +758,7 @@ xfs_convert_page(
 
 	if (page->index != tindex)
 		goto fail;
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		goto fail;
 	if (PageWriteback(page))
 		goto fail_unlock_page;
@@ -858,7 +856,7 @@ xfs_convert_page(
 				done = 1;
 			}
 		}
-		xfs_start_page_writeback(page, wbc, !page_dirty, count);
+		xfs_start_page_writeback(page, !page_dirty, count);
 	}
 
 	return done;
@@ -1105,7 +1103,7 @@ xfs_page_state_convert(
 			 * that we are writing into for the first time.
 			 */
 			type = IOMAP_NEW;
-			if (!test_and_set_bit(BH_Lock, &bh->b_state)) {
+			if (trylock_buffer(bh)) {
 				ASSERT(buffer_mapped(bh));
 				if (iomap_valid)
 					all_bh = 1;
@@ -1130,7 +1128,7 @@ xfs_page_state_convert(
 		SetPageUptodate(page);
 
 	if (startio)
-		xfs_start_page_writeback(page, wbc, 1, count);
+		xfs_start_page_writeback(page, 1, count);
 
 	if (ioend && iomap_valid) {
 		offset = (iomap.iomap_offset + iomap.iomap_bsize - 1) >>
@@ -1340,6 +1338,10 @@ __xfs_get_blocks(
 	offset = (xfs_off_t)iblock << inode->i_blkbits;
 	ASSERT(bh_result->b_size >= (1 << inode->i_blkbits));
 	size = bh_result->b_size;
+
+	if (!create && direct && offset >= i_size_read(inode))
+		return 0;
+
 	error = xfs_iomap(XFS_I(inode), offset, size,
 			     create ? flags : BMAPI_READ, &iomap, &niomap);
 	if (error)
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 98e0e86093b..986061ae1b9 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -58,7 +58,7 @@ xfs_buf_trace(
 		bp, id,
 		(void *)(unsigned long)bp->b_flags,
 		(void *)(unsigned long)bp->b_hold.counter,
-		(void *)(unsigned long)bp->b_sema.count.counter,
+		(void *)(unsigned long)bp->b_sema.count,
 		(void *)current,
 		data, ra,
 		(void *)(unsigned long)((bp->b_file_offset>>32) & 0xffffffff),
@@ -253,7 +253,7 @@ _xfs_buf_initialize(
 
 	memset(bp, 0, sizeof(xfs_buf_t));
 	atomic_set(&bp->b_hold, 1);
-	init_MUTEX_LOCKED(&bp->b_iodonesema);
+	init_completion(&bp->b_iowait);
 	INIT_LIST_HEAD(&bp->b_list);
 	INIT_LIST_HEAD(&bp->b_hash_list);
 	init_MUTEX_LOCKED(&bp->b_sema); /* held, no waiters */
@@ -310,8 +310,7 @@ _xfs_buf_free_pages(
 	xfs_buf_t	*bp)
 {
 	if (bp->b_pages != bp->b_page_array) {
-		kmem_free(bp->b_pages,
-			  bp->b_page_count * sizeof(struct page *));
+		kmem_free(bp->b_pages);
 	}
 }
 
@@ -839,6 +838,7 @@ xfs_buf_rele(
 		return;
 	}
 
+	ASSERT(atomic_read(&bp->b_hold) > 0);
 	if (atomic_dec_and_lock(&bp->b_hold, &hash->bh_lock)) {
 		if (bp->b_relse) {
 			atomic_inc(&bp->b_hold);
@@ -852,11 +852,6 @@ xfs_buf_rele(
 			spin_unlock(&hash->bh_lock);
 			xfs_buf_free(bp);
 		}
-	} else {
-		/*
-		 * Catch reference count leaks
-		 */
-		ASSERT(atomic_read(&bp->b_hold) >= 0);
 	}
 }
 
@@ -1038,7 +1033,7 @@ xfs_buf_ioend(
 			xfs_buf_iodone_work(&bp->b_iodone_work);
 		}
 	} else {
-		up(&bp->b_iodonesema);
+		complete(&bp->b_iowait);
 	}
 }
 
@@ -1276,7 +1271,7 @@ xfs_buf_iowait(
 	XB_TRACE(bp, "iowait", 0);
 	if (atomic_read(&bp->b_io_remaining))
 		blk_run_address_space(bp->b_target->bt_mapping);
-	down(&bp->b_iodonesema);
+	wait_for_completion(&bp->b_iowait);
 	XB_TRACE(bp, "iowaited", (long)bp->b_error);
 	return bp->b_error;
 }
@@ -1398,7 +1393,7 @@ STATIC void
 xfs_free_bufhash(
 	xfs_buftarg_t		*btp)
 {
-	kmem_free(btp->bt_hash, (1<<btp->bt_hashshift) * sizeof(xfs_bufhash_t));
+	kmem_free(btp->bt_hash);
 	btp->bt_hash = NULL;
 }
 
@@ -1428,13 +1423,10 @@ xfs_unregister_buftarg(
 
 void
 xfs_free_buftarg(
-	xfs_buftarg_t		*btp,
-	int			external)
+	xfs_buftarg_t		*btp)
 {
 	xfs_flush_buftarg(btp, 1);
 	xfs_blkdev_issue_flush(btp);
-	if (external)
-		xfs_blkdev_put(btp->bt_bdev);
 	xfs_free_bufhash(btp);
 	iput(btp->bt_mapping->host);
 
@@ -1444,7 +1436,7 @@ xfs_free_buftarg(
 	xfs_unregister_buftarg(btp);
 	kthread_stop(btp->bt_task);
 
-	kmem_free(btp, sizeof(*btp));
+	kmem_free(btp);
 }
 
 STATIC int
@@ -1575,7 +1567,7 @@ xfs_alloc_buftarg(
 	return btp;
 
 error:
-	kmem_free(btp, sizeof(*btp));
+	kmem_free(btp);
 	return NULL;
 }
 
@@ -1803,7 +1795,7 @@ int __init
 xfs_buf_init(void)
 {
 #ifdef XFS_BUF_TRACE
-	xfs_buf_trace_buf = ktrace_alloc(XFS_BUF_TRACE_SIZE, KM_SLEEP);
+	xfs_buf_trace_buf = ktrace_alloc(XFS_BUF_TRACE_SIZE, KM_NOFS);
 #endif
 
 	xfs_buf_zone = kmem_zone_init_flags(sizeof(xfs_buf_t), "xfs_buf",
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index f948ec7ba9a..fe010995665 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -157,7 +157,7 @@ typedef struct xfs_buf {
 	xfs_buf_iodone_t	b_iodone;	/* I/O completion function */
 	xfs_buf_relse_t		b_relse;	/* releasing function */
 	xfs_buf_bdstrat_t	b_strat;	/* pre-write function */
-	struct semaphore	b_iodonesema;	/* Semaphore for I/O waiters */
+	struct completion	b_iowait;	/* queue for I/O waiters */
 	void			*b_fspriv;
 	void			*b_fspriv2;
 	void			*b_fspriv3;
@@ -352,7 +352,7 @@ extern void xfs_buf_trace(xfs_buf_t *, char *, void *, void *);
 #define XFS_BUF_CPSEMA(bp)	(xfs_buf_cond_lock(bp) == 0)
 #define XFS_BUF_VSEMA(bp)	xfs_buf_unlock(bp)
 #define XFS_BUF_PSEMA(bp,x)	xfs_buf_lock(bp)
-#define XFS_BUF_V_IODONESEMA(bp) up(&bp->b_iodonesema);
+#define XFS_BUF_FINISH_IOWAIT(bp)	complete(&bp->b_iowait);
 
 #define XFS_BUF_SET_TARGET(bp, target)	((bp)->b_target = (target))
 #define XFS_BUF_TARGET(bp)		((bp)->b_target)
@@ -429,7 +429,7 @@ static inline void xfs_bdwrite(void *mp, xfs_buf_t *bp)
  *	Handling of buftargs.
  */
 extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int);
-extern void xfs_free_buftarg(xfs_buftarg_t *, int);
+extern void xfs_free_buftarg(xfs_buftarg_t *);
 extern void xfs_wait_buftarg(xfs_buftarg_t *);
 extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int);
 extern int xfs_flush_buftarg(xfs_buftarg_t *, int);
diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c
index c672b3238b1..24fd598af84 100644
--- a/fs/xfs/linux-2.6/xfs_export.c
+++ b/fs/xfs/linux-2.6/xfs_export.c
@@ -139,7 +139,7 @@ xfs_nfs_get_inode(
 	}
 
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-	return ip->i_vnode;
+	return VFS_I(ip);
 }
 
 STATIC struct dentry *
@@ -167,7 +167,7 @@ xfs_fs_fh_to_dentry(struct super_block *sb, struct fid *fid,
 	if (!inode)
 		return NULL;
 	if (IS_ERR(inode))
-		return ERR_PTR(PTR_ERR(inode));
+		return ERR_CAST(inode);
 	result = d_alloc_anon(inode);
 	if (!result) {
 		iput(inode);
@@ -198,7 +198,7 @@ xfs_fs_fh_to_parent(struct super_block *sb, struct fid *fid,
 	if (!inode)
 		return NULL;
 	if (IS_ERR(inode))
-		return ERR_PTR(PTR_ERR(inode));
+		return ERR_CAST(inode);
 	result = d_alloc_anon(inode);
 	if (!result) {
 		iput(inode);
@@ -215,13 +215,13 @@ xfs_fs_get_parent(
 	struct xfs_inode	*cip;
 	struct dentry		*parent;
 
-	error = xfs_lookup(XFS_I(child->d_inode), &xfs_name_dotdot, &cip);
+	error = xfs_lookup(XFS_I(child->d_inode), &xfs_name_dotdot, &cip, NULL);
 	if (unlikely(error))
 		return ERR_PTR(-error);
 
-	parent = d_alloc_anon(cip->i_vnode);
+	parent = d_alloc_anon(VFS_I(cip));
 	if (unlikely(!parent)) {
-		iput(cip->i_vnode);
+		iput(VFS_I(cip));
 		return ERR_PTR(-ENOMEM);
 	}
 	return parent;
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 5f60363b934..5311c1acdd4 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -475,6 +475,7 @@ const struct file_operations xfs_invis_file_operations = {
 const struct file_operations xfs_dir_file_operations = {
 	.read		= generic_read_dir,
 	.readdir	= xfs_file_readdir,
+	.llseek		= generic_file_llseek,
 	.unlocked_ioctl	= xfs_file_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= xfs_file_compat_ioctl,
diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.c b/fs/xfs/linux-2.6/xfs_fs_subr.c
index 1eefe61f0e1..36caa6d957d 100644
--- a/fs/xfs/linux-2.6/xfs_fs_subr.c
+++ b/fs/xfs/linux-2.6/xfs_fs_subr.c
@@ -31,7 +31,7 @@ xfs_tosspages(
 	xfs_off_t	last,
 	int		fiopt)
 {
-	struct address_space *mapping = ip->i_vnode->i_mapping;
+	struct address_space *mapping = VFS_I(ip)->i_mapping;
 
 	if (mapping->nrpages)
 		truncate_inode_pages(mapping, first);
@@ -44,7 +44,7 @@ xfs_flushinval_pages(
 	xfs_off_t	last,
 	int		fiopt)
 {
-	struct address_space *mapping = ip->i_vnode->i_mapping;
+	struct address_space *mapping = VFS_I(ip)->i_mapping;
 	int		ret = 0;
 
 	if (mapping->nrpages) {
@@ -64,7 +64,7 @@ xfs_flush_pages(
 	uint64_t	flags,
 	int		fiopt)
 {
-	struct address_space *mapping = ip->i_vnode->i_mapping;
+	struct address_space *mapping = VFS_I(ip)->i_mapping;
 	int		ret = 0;
 	int		ret2;
 
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index 01939ba2d8d..48799ba7e3e 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -48,6 +48,8 @@
 #include "xfs_dfrag.h"
 #include "xfs_fsops.h"
 #include "xfs_vnodeops.h"
+#include "xfs_quota.h"
+#include "xfs_inode_item.h"
 
 #include <linux/capability.h>
 #include <linux/dcache.h>
@@ -243,7 +245,7 @@ xfs_vget_fsop_handlereq(
 
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
 
-	*inode = XFS_ITOV(ip);
+	*inode = VFS_I(ip);
 	return 0;
 }
 
@@ -468,6 +470,12 @@ xfs_attrlist_by_handle(
 	if (al_hreq.buflen > XATTR_LIST_MAX)
 		return -XFS_ERROR(EINVAL);
 
+	/*
+	 * Reject flags, only allow namespaces.
+	 */
+	if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE))
+		return -XFS_ERROR(EINVAL);
+
 	error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode);
 	if (error)
 		goto out;
@@ -587,7 +595,7 @@ xfs_attrmulti_by_handle(
 		goto out;
 
 	error = E2BIG;
-	size = am_hreq.opcount * sizeof(attr_multiop_t);
+	size = am_hreq.opcount * sizeof(xfs_attr_multiop_t);
 	if (!size || size > 16 * PAGE_SIZE)
 		goto out_vn_rele;
 
@@ -680,9 +688,9 @@ xfs_ioc_space(
 		return -XFS_ERROR(EFAULT);
 
 	if (filp->f_flags & (O_NDELAY|O_NONBLOCK))
-		attr_flags |= ATTR_NONBLOCK;
+		attr_flags |= XFS_ATTR_NONBLOCK;
 	if (ioflags & IO_INVIS)
-		attr_flags |= ATTR_DMI;
+		attr_flags |= XFS_ATTR_DMI;
 
 	error = xfs_change_file_space(ip, cmd, &bf, filp->f_pos,
 					      NULL, attr_flags);
@@ -873,6 +881,322 @@ xfs_ioc_fsgetxattr(
 	return 0;
 }
 
+STATIC void
+xfs_set_diflags(
+	struct xfs_inode	*ip,
+	unsigned int		xflags)
+{
+	unsigned int		di_flags;
+
+	/* can't set PREALLOC this way, just preserve it */
+	di_flags = (ip->i_d.di_flags & XFS_DIFLAG_PREALLOC);
+	if (xflags & XFS_XFLAG_IMMUTABLE)
+		di_flags |= XFS_DIFLAG_IMMUTABLE;
+	if (xflags & XFS_XFLAG_APPEND)
+		di_flags |= XFS_DIFLAG_APPEND;
+	if (xflags & XFS_XFLAG_SYNC)
+		di_flags |= XFS_DIFLAG_SYNC;
+	if (xflags & XFS_XFLAG_NOATIME)
+		di_flags |= XFS_DIFLAG_NOATIME;
+	if (xflags & XFS_XFLAG_NODUMP)
+		di_flags |= XFS_DIFLAG_NODUMP;
+	if (xflags & XFS_XFLAG_PROJINHERIT)
+		di_flags |= XFS_DIFLAG_PROJINHERIT;
+	if (xflags & XFS_XFLAG_NODEFRAG)
+		di_flags |= XFS_DIFLAG_NODEFRAG;
+	if (xflags & XFS_XFLAG_FILESTREAM)
+		di_flags |= XFS_DIFLAG_FILESTREAM;
+	if ((ip->i_d.di_mode & S_IFMT) == S_IFDIR) {
+		if (xflags & XFS_XFLAG_RTINHERIT)
+			di_flags |= XFS_DIFLAG_RTINHERIT;
+		if (xflags & XFS_XFLAG_NOSYMLINKS)
+			di_flags |= XFS_DIFLAG_NOSYMLINKS;
+		if (xflags & XFS_XFLAG_EXTSZINHERIT)
+			di_flags |= XFS_DIFLAG_EXTSZINHERIT;
+	} else if ((ip->i_d.di_mode & S_IFMT) == S_IFREG) {
+		if (xflags & XFS_XFLAG_REALTIME)
+			di_flags |= XFS_DIFLAG_REALTIME;
+		if (xflags & XFS_XFLAG_EXTSIZE)
+			di_flags |= XFS_DIFLAG_EXTSIZE;
+	}
+
+	ip->i_d.di_flags = di_flags;
+}
+
+STATIC void
+xfs_diflags_to_linux(
+	struct xfs_inode	*ip)
+{
+	struct inode		*inode = VFS_I(ip);
+	unsigned int		xflags = xfs_ip2xflags(ip);
+
+	if (xflags & XFS_XFLAG_IMMUTABLE)
+		inode->i_flags |= S_IMMUTABLE;
+	else
+		inode->i_flags &= ~S_IMMUTABLE;
+	if (xflags & XFS_XFLAG_APPEND)
+		inode->i_flags |= S_APPEND;
+	else
+		inode->i_flags &= ~S_APPEND;
+	if (xflags & XFS_XFLAG_SYNC)
+		inode->i_flags |= S_SYNC;
+	else
+		inode->i_flags &= ~S_SYNC;
+	if (xflags & XFS_XFLAG_NOATIME)
+		inode->i_flags |= S_NOATIME;
+	else
+		inode->i_flags &= ~S_NOATIME;
+}
+
+#define FSX_PROJID	1
+#define FSX_EXTSIZE	2
+#define FSX_XFLAGS	4
+#define FSX_NONBLOCK	8
+
+STATIC int
+xfs_ioctl_setattr(
+	xfs_inode_t		*ip,
+	struct fsxattr		*fa,
+	int			mask)
+{
+	struct xfs_mount	*mp = ip->i_mount;
+	struct xfs_trans	*tp;
+	unsigned int		lock_flags = 0;
+	struct xfs_dquot	*udqp = NULL, *gdqp = NULL;
+	struct xfs_dquot	*olddquot = NULL;
+	int			code;
+
+	xfs_itrace_entry(ip);
+
+	if (mp->m_flags & XFS_MOUNT_RDONLY)
+		return XFS_ERROR(EROFS);
+	if (XFS_FORCED_SHUTDOWN(mp))
+		return XFS_ERROR(EIO);
+
+	/*
+	 * If disk quotas is on, we make sure that the dquots do exist on disk,
+	 * before we start any other transactions. Trying to do this later
+	 * is messy. We don't care to take a readlock to look at the ids
+	 * in inode here, because we can't hold it across the trans_reserve.
+	 * If the IDs do change before we take the ilock, we're covered
+	 * because the i_*dquot fields will get updated anyway.
+	 */
+	if (XFS_IS_QUOTA_ON(mp) && (mask & FSX_PROJID)) {
+		code = XFS_QM_DQVOPALLOC(mp, ip, ip->i_d.di_uid,
+					 ip->i_d.di_gid, fa->fsx_projid,
+					 XFS_QMOPT_PQUOTA, &udqp, &gdqp);
+		if (code)
+			return code;
+	}
+
+	/*
+	 * For the other attributes, we acquire the inode lock and
+	 * first do an error checking pass.
+	 */
+	tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE);
+	code = xfs_trans_reserve(tp, 0, XFS_ICHANGE_LOG_RES(mp), 0, 0, 0);
+	if (code)
+		goto error_return;
+
+	lock_flags = XFS_ILOCK_EXCL;
+	xfs_ilock(ip, lock_flags);
+
+	/*
+	 * CAP_FOWNER overrides the following restrictions:
+	 *
+	 * The user ID of the calling process must be equal
+	 * to the file owner ID, except in cases where the
+	 * CAP_FSETID capability is applicable.
+	 */
+	if (current->fsuid != ip->i_d.di_uid && !capable(CAP_FOWNER)) {
+		code = XFS_ERROR(EPERM);
+		goto error_return;
+	}
+
+	/*
+	 * Do a quota reservation only if projid is actually going to change.
+	 */
+	if (mask & FSX_PROJID) {
+		if (XFS_IS_PQUOTA_ON(mp) &&
+		    ip->i_d.di_projid != fa->fsx_projid) {
+			ASSERT(tp);
+			code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp,
+						capable(CAP_FOWNER) ?
+						XFS_QMOPT_FORCE_RES : 0);
+			if (code)	/* out of quota */
+				goto error_return;
+		}
+	}
+
+	if (mask & FSX_EXTSIZE) {
+		/*
+		 * Can't change extent size if any extents are allocated.
+		 */
+		if (ip->i_d.di_nextents &&
+		    ((ip->i_d.di_extsize << mp->m_sb.sb_blocklog) !=
+		     fa->fsx_extsize)) {
+			code = XFS_ERROR(EINVAL);	/* EFBIG? */
+			goto error_return;
+		}
+
+		/*
+		 * Extent size must be a multiple of the appropriate block
+		 * size, if set at all.
+		 */
+		if (fa->fsx_extsize != 0) {
+			xfs_extlen_t	size;
+
+			if (XFS_IS_REALTIME_INODE(ip) ||
+			    ((mask & FSX_XFLAGS) &&
+			    (fa->fsx_xflags & XFS_XFLAG_REALTIME))) {
+				size = mp->m_sb.sb_rextsize <<
+				       mp->m_sb.sb_blocklog;
+			} else {
+				size = mp->m_sb.sb_blocksize;
+			}
+
+			if (fa->fsx_extsize % size) {
+				code = XFS_ERROR(EINVAL);
+				goto error_return;
+			}
+		}
+	}
+
+
+	if (mask & FSX_XFLAGS) {
+		/*
+		 * Can't change realtime flag if any extents are allocated.
+		 */
+		if ((ip->i_d.di_nextents || ip->i_delayed_blks) &&
+		    (XFS_IS_REALTIME_INODE(ip)) !=
+		    (fa->fsx_xflags & XFS_XFLAG_REALTIME)) {
+			code = XFS_ERROR(EINVAL);	/* EFBIG? */
+			goto error_return;
+		}
+
+		/*
+		 * If realtime flag is set then must have realtime data.
+		 */
+		if ((fa->fsx_xflags & XFS_XFLAG_REALTIME)) {
+			if ((mp->m_sb.sb_rblocks == 0) ||
+			    (mp->m_sb.sb_rextsize == 0) ||
+			    (ip->i_d.di_extsize % mp->m_sb.sb_rextsize)) {
+				code = XFS_ERROR(EINVAL);
+				goto error_return;
+			}
+		}
+
+		/*
+		 * Can't modify an immutable/append-only file unless
+		 * we have appropriate permission.
+		 */
+		if ((ip->i_d.di_flags &
+				(XFS_DIFLAG_IMMUTABLE|XFS_DIFLAG_APPEND) ||
+		     (fa->fsx_xflags &
+				(XFS_XFLAG_IMMUTABLE | XFS_XFLAG_APPEND))) &&
+		    !capable(CAP_LINUX_IMMUTABLE)) {
+			code = XFS_ERROR(EPERM);
+			goto error_return;
+		}
+	}
+
+	xfs_trans_ijoin(tp, ip, lock_flags);
+	xfs_trans_ihold(tp, ip);
+
+	/*
+	 * Change file ownership.  Must be the owner or privileged.
+	 * If the system was configured with the "restricted_chown"
+	 * option, the owner is not permitted to give away the file,
+	 * and can change the group id only to a group of which he
+	 * or she is a member.
+	 */
+	if (mask & FSX_PROJID) {
+		/*
+		 * CAP_FSETID overrides the following restrictions:
+		 *
+		 * The set-user-ID and set-group-ID bits of a file will be
+		 * cleared upon successful return from chown()
+		 */
+		if ((ip->i_d.di_mode & (S_ISUID|S_ISGID)) &&
+		    !capable(CAP_FSETID))
+			ip->i_d.di_mode &= ~(S_ISUID|S_ISGID);
+
+		/*
+		 * Change the ownerships and register quota modifications
+		 * in the transaction.
+		 */
+		if (ip->i_d.di_projid != fa->fsx_projid) {
+			if (XFS_IS_PQUOTA_ON(mp)) {
+				olddquot = XFS_QM_DQVOPCHOWN(mp, tp, ip,
+							&ip->i_gdquot, gdqp);
+			}
+			ip->i_d.di_projid = fa->fsx_projid;
+
+			/*
+			 * We may have to rev the inode as well as
+			 * the superblock version number since projids didn't
+			 * exist before DINODE_VERSION_2 and SB_VERSION_NLINK.
+			 */
+			if (ip->i_d.di_version == XFS_DINODE_VERSION_1)
+				xfs_bump_ino_vers2(tp, ip);
+		}
+
+	}
+
+	if (mask & FSX_EXTSIZE)
+		ip->i_d.di_extsize = fa->fsx_extsize >> mp->m_sb.sb_blocklog;
+	if (mask & FSX_XFLAGS) {
+		xfs_set_diflags(ip, fa->fsx_xflags);
+		xfs_diflags_to_linux(ip);
+	}
+
+	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
+	xfs_ichgtime(ip, XFS_ICHGTIME_CHG);
+
+	XFS_STATS_INC(xs_ig_attrchg);
+
+	/*
+	 * If this is a synchronous mount, make sure that the
+	 * transaction goes to disk before returning to the user.
+	 * This is slightly sub-optimal in that truncates require
+	 * two sync transactions instead of one for wsync filesystems.
+	 * One for the truncate and one for the timestamps since we
+	 * don't want to change the timestamps unless we're sure the
+	 * truncate worked.  Truncates are less than 1% of the laddis
+	 * mix so this probably isn't worth the trouble to optimize.
+	 */
+	if (mp->m_flags & XFS_MOUNT_WSYNC)
+		xfs_trans_set_sync(tp);
+	code = xfs_trans_commit(tp, 0);
+	xfs_iunlock(ip, lock_flags);
+
+	/*
+	 * Release any dquot(s) the inode had kept before chown.
+	 */
+	XFS_QM_DQRELE(mp, olddquot);
+	XFS_QM_DQRELE(mp, udqp);
+	XFS_QM_DQRELE(mp, gdqp);
+
+	if (code)
+		return code;
+
+	if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE)) {
+		XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL,
+				NULL, DM_RIGHT_NULL, NULL, NULL, 0, 0,
+				(mask & FSX_NONBLOCK) ? DM_FLAGS_NDELAY : 0);
+	}
+
+	return 0;
+
+ error_return:
+	XFS_QM_DQRELE(mp, udqp);
+	XFS_QM_DQRELE(mp, gdqp);
+	xfs_trans_cancel(tp, 0);
+	if (lock_flags)
+		xfs_iunlock(ip, lock_flags);
+	return code;
+}
+
 STATIC int
 xfs_ioc_fssetxattr(
 	xfs_inode_t		*ip,
@@ -880,31 +1204,16 @@ xfs_ioc_fssetxattr(
 	void			__user *arg)
 {
 	struct fsxattr		fa;
-	struct bhv_vattr	*vattr;
-	int			error;
-	int			attr_flags;
+	unsigned int		mask;
 
 	if (copy_from_user(&fa, arg, sizeof(fa)))
 		return -EFAULT;
 
-	vattr = kmalloc(sizeof(*vattr), GFP_KERNEL);
-	if (unlikely(!vattr))
-		return -ENOMEM;
-
-	attr_flags = 0;
+	mask = FSX_XFLAGS | FSX_EXTSIZE | FSX_PROJID;
 	if (filp->f_flags & (O_NDELAY|O_NONBLOCK))
-		attr_flags |= ATTR_NONBLOCK;
-
-	vattr->va_mask = XFS_AT_XFLAGS | XFS_AT_EXTSIZE | XFS_AT_PROJID;
-	vattr->va_xflags  = fa.fsx_xflags;
-	vattr->va_extsize = fa.fsx_extsize;
-	vattr->va_projid  = fa.fsx_projid;
+		mask |= FSX_NONBLOCK;
 
-	error = -xfs_setattr(ip, vattr, attr_flags, NULL);
-	if (!error)
-		vn_revalidate(XFS_ITOV(ip));	/* update flags */
-	kfree(vattr);
-	return 0;
+	return -xfs_ioctl_setattr(ip, &fa, mask);
 }
 
 STATIC int
@@ -926,10 +1235,9 @@ xfs_ioc_setxflags(
 	struct file		*filp,
 	void			__user *arg)
 {
-	struct bhv_vattr	*vattr;
+	struct fsxattr		fa;
 	unsigned int		flags;
-	int			attr_flags;
-	int			error;
+	unsigned int		mask;
 
 	if (copy_from_user(&flags, arg, sizeof(flags)))
 		return -EFAULT;
@@ -939,22 +1247,12 @@ xfs_ioc_setxflags(
 		      FS_SYNC_FL))
 		return -EOPNOTSUPP;
 
-	vattr = kmalloc(sizeof(*vattr), GFP_KERNEL);
-	if (unlikely(!vattr))
-		return -ENOMEM;
-
-	attr_flags = 0;
+	mask = FSX_XFLAGS;
 	if (filp->f_flags & (O_NDELAY|O_NONBLOCK))
-		attr_flags |= ATTR_NONBLOCK;
-
-	vattr->va_mask = XFS_AT_XFLAGS;
-	vattr->va_xflags = xfs_merge_ioc_xflags(flags, xfs_ip2xflags(ip));
+		mask |= FSX_NONBLOCK;
+	fa.fsx_xflags = xfs_merge_ioc_xflags(flags, xfs_ip2xflags(ip));
 
-	error = -xfs_setattr(ip, vattr, attr_flags, NULL);
-	if (likely(!error))
-		vn_revalidate(XFS_ITOV(ip));	/* update flags */
-	kfree(vattr);
-	return error;
+	return -xfs_ioctl_setattr(ip, &fa, mask);
 }
 
 STATIC int
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 5fc61c824bb..095d271f343 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -62,7 +62,7 @@ void
 xfs_synchronize_atime(
 	xfs_inode_t	*ip)
 {
-	struct inode	*inode = ip->i_vnode;
+	struct inode	*inode = VFS_I(ip);
 
 	if (inode) {
 		ip->i_d.di_atime.t_sec = (__int32_t)inode->i_atime.tv_sec;
@@ -79,7 +79,7 @@ void
 xfs_mark_inode_dirty_sync(
 	xfs_inode_t	*ip)
 {
-	struct inode	*inode = ip->i_vnode;
+	struct inode	*inode = VFS_I(ip);
 
 	if (inode)
 		mark_inode_dirty_sync(inode);
@@ -89,36 +89,31 @@ xfs_mark_inode_dirty_sync(
  * Change the requested timestamp in the given inode.
  * We don't lock across timestamp updates, and we don't log them but
  * we do record the fact that there is dirty information in core.
- *
- * NOTE -- callers MUST combine XFS_ICHGTIME_MOD or XFS_ICHGTIME_CHG
- *		with XFS_ICHGTIME_ACC to be sure that access time
- *		update will take.  Calling first with XFS_ICHGTIME_ACC
- *		and then XFS_ICHGTIME_MOD may fail to modify the access
- *		timestamp if the filesystem is mounted noacctm.
  */
 void
 xfs_ichgtime(
 	xfs_inode_t	*ip,
 	int		flags)
 {
-	struct inode	*inode = vn_to_inode(XFS_ITOV(ip));
+	struct inode	*inode = VFS_I(ip);
 	timespec_t	tv;
+	int		sync_it = 0;
+
+	tv = current_fs_time(inode->i_sb);
 
-	nanotime(&tv);
-	if (flags & XFS_ICHGTIME_MOD) {
+	if ((flags & XFS_ICHGTIME_MOD) &&
+	    !timespec_equal(&inode->i_mtime, &tv)) {
 		inode->i_mtime = tv;
 		ip->i_d.di_mtime.t_sec = (__int32_t)tv.tv_sec;
 		ip->i_d.di_mtime.t_nsec = (__int32_t)tv.tv_nsec;
+		sync_it = 1;
 	}
-	if (flags & XFS_ICHGTIME_ACC) {
-		inode->i_atime = tv;
-		ip->i_d.di_atime.t_sec = (__int32_t)tv.tv_sec;
-		ip->i_d.di_atime.t_nsec = (__int32_t)tv.tv_nsec;
-	}
-	if (flags & XFS_ICHGTIME_CHG) {
+	if ((flags & XFS_ICHGTIME_CHG) &&
+	    !timespec_equal(&inode->i_ctime, &tv)) {
 		inode->i_ctime = tv;
 		ip->i_d.di_ctime.t_sec = (__int32_t)tv.tv_sec;
 		ip->i_d.di_ctime.t_nsec = (__int32_t)tv.tv_nsec;
+		sync_it = 1;
 	}
 
 	/*
@@ -130,72 +125,11 @@ xfs_ichgtime(
 	 * ensure that the compiler does not reorder the update
 	 * of i_update_core above the timestamp updates above.
 	 */
-	SYNCHRONIZE();
-	ip->i_update_core = 1;
-	if (!(inode->i_state & I_NEW))
+	if (sync_it) {
+		SYNCHRONIZE();
+		ip->i_update_core = 1;
 		mark_inode_dirty_sync(inode);
-}
-
-/*
- * Variant on the above which avoids querying the system clock
- * in situations where we know the Linux inode timestamps have
- * just been updated (and so we can update our inode cheaply).
- */
-void
-xfs_ichgtime_fast(
-	xfs_inode_t	*ip,
-	struct inode	*inode,
-	int		flags)
-{
-	timespec_t	*tvp;
-
-	/*
-	 * Atime updates for read() & friends are handled lazily now, and
-	 * explicit updates must go through xfs_ichgtime()
-	 */
-	ASSERT((flags & XFS_ICHGTIME_ACC) == 0);
-
-	if (flags & XFS_ICHGTIME_MOD) {
-		tvp = &inode->i_mtime;
-		ip->i_d.di_mtime.t_sec = (__int32_t)tvp->tv_sec;
-		ip->i_d.di_mtime.t_nsec = (__int32_t)tvp->tv_nsec;
-	}
-	if (flags & XFS_ICHGTIME_CHG) {
-		tvp = &inode->i_ctime;
-		ip->i_d.di_ctime.t_sec = (__int32_t)tvp->tv_sec;
-		ip->i_d.di_ctime.t_nsec = (__int32_t)tvp->tv_nsec;
 	}
-
-	/*
-	 * We update the i_update_core field _after_ changing
-	 * the timestamps in order to coordinate properly with
-	 * xfs_iflush() so that we don't lose timestamp updates.
-	 * This keeps us from having to hold the inode lock
-	 * while doing this.  We use the SYNCHRONIZE macro to
-	 * ensure that the compiler does not reorder the update
-	 * of i_update_core above the timestamp updates above.
-	 */
-	SYNCHRONIZE();
-	ip->i_update_core = 1;
-	if (!(inode->i_state & I_NEW))
-		mark_inode_dirty_sync(inode);
-}
-
-
-/*
- * Pull the link count and size up from the xfs inode to the linux inode
- */
-STATIC void
-xfs_validate_fields(
-	struct inode		*inode)
-{
-	struct xfs_inode	*ip = XFS_I(inode);
-	loff_t size;
-
-	/* we're under i_sem so i_size can't change under us */
-	size = XFS_ISIZE(ip);
-	if (i_size_read(inode) != size)
-		i_size_write(inode, size);
 }
 
 /*
@@ -245,8 +179,7 @@ STATIC void
 xfs_cleanup_inode(
 	struct inode	*dir,
 	struct inode	*inode,
-	struct dentry	*dentry,
-	int		mode)
+	struct dentry	*dentry)
 {
 	struct xfs_name	teardown;
 
@@ -257,10 +190,7 @@ xfs_cleanup_inode(
 	 */
 	xfs_dentry_to_name(&teardown, dentry);
 
-	if (S_ISDIR(mode))
-		xfs_rmdir(XFS_I(dir), &teardown, XFS_I(inode));
-	else
-		xfs_remove(XFS_I(dir), &teardown, XFS_I(inode));
+	xfs_remove(XFS_I(dir), &teardown, XFS_I(inode));
 	iput(inode);
 }
 
@@ -275,7 +205,7 @@ xfs_vn_mknod(
 	struct xfs_inode *ip = NULL;
 	xfs_acl_t	*default_acl = NULL;
 	struct xfs_name	name;
-	attrexists_t	test_default_acl = _ACL_DEFAULT_EXISTS;
+	int (*test_default_acl)(struct inode *) = _ACL_DEFAULT_EXISTS;
 	int		error;
 
 	/*
@@ -320,7 +250,7 @@ xfs_vn_mknod(
 	if (unlikely(error))
 		goto out_free_acl;
 
-	inode = ip->i_vnode;
+	inode = VFS_I(ip);
 
 	error = xfs_init_security(inode, dir);
 	if (unlikely(error))
@@ -335,14 +265,11 @@ xfs_vn_mknod(
 	}
 
 
-	if (S_ISDIR(mode))
-		xfs_validate_fields(inode);
 	d_instantiate(dentry, inode);
-	xfs_validate_fields(dir);
 	return -error;
 
  out_cleanup_inode:
-	xfs_cleanup_inode(dir, inode, dentry, mode);
+	xfs_cleanup_inode(dir, inode, dentry);
  out_free_acl:
 	if (default_acl)
 		_ACL_FREE(default_acl);
@@ -382,7 +309,7 @@ xfs_vn_lookup(
 		return ERR_PTR(-ENAMETOOLONG);
 
 	xfs_dentry_to_name(&name, dentry);
-	error = xfs_lookup(XFS_I(dir), &name, &cip);
+	error = xfs_lookup(XFS_I(dir), &name, &cip, NULL);
 	if (unlikely(error)) {
 		if (unlikely(error != ENOENT))
 			return ERR_PTR(-error);
@@ -390,7 +317,47 @@ xfs_vn_lookup(
 		return NULL;
 	}
 
-	return d_splice_alias(cip->i_vnode, dentry);
+	return d_splice_alias(VFS_I(cip), dentry);
+}
+
+STATIC struct dentry *
+xfs_vn_ci_lookup(
+	struct inode	*dir,
+	struct dentry	*dentry,
+	struct nameidata *nd)
+{
+	struct xfs_inode *ip;
+	struct xfs_name	xname;
+	struct xfs_name ci_name;
+	struct qstr	dname;
+	int		error;
+
+	if (dentry->d_name.len >= MAXNAMELEN)
+		return ERR_PTR(-ENAMETOOLONG);
+
+	xfs_dentry_to_name(&xname, dentry);
+	error = xfs_lookup(XFS_I(dir), &xname, &ip, &ci_name);
+	if (unlikely(error)) {
+		if (unlikely(error != ENOENT))
+			return ERR_PTR(-error);
+		/*
+		 * call d_add(dentry, NULL) here when d_drop_negative_children
+		 * is called in xfs_vn_mknod (ie. allow negative dentries
+		 * with CI filesystems).
+		 */
+		return NULL;
+	}
+
+	/* if exact match, just splice and exit */
+	if (!ci_name.name)
+		return d_splice_alias(VFS_I(ip), dentry);
+
+	/* else case-insensitive match... */
+	dname.name = ci_name.name;
+	dname.len = ci_name.len;
+	dentry = d_add_ci(dentry, VFS_I(ip), &dname);
+	kmem_free(ci_name.name);
+	return dentry;
 }
 
 STATIC int
@@ -414,7 +381,6 @@ xfs_vn_link(
 	}
 
 	xfs_iflags_set(XFS_I(dir), XFS_IMODIFIED);
-	xfs_validate_fields(inode);
 	d_instantiate(dentry, inode);
 	return 0;
 }
@@ -424,19 +390,23 @@ xfs_vn_unlink(
 	struct inode	*dir,
 	struct dentry	*dentry)
 {
-	struct inode	*inode;
 	struct xfs_name	name;
 	int		error;
 
-	inode = dentry->d_inode;
 	xfs_dentry_to_name(&name, dentry);
 
-	error = xfs_remove(XFS_I(dir), &name, XFS_I(inode));
-	if (likely(!error)) {
-		xfs_validate_fields(dir);	/* size needs update */
-		xfs_validate_fields(inode);
-	}
-	return -error;
+	error = -xfs_remove(XFS_I(dir), &name, XFS_I(dentry->d_inode));
+	if (error)
+		return error;
+
+	/*
+	 * With unlink, the VFS makes the dentry "negative": no inode,
+	 * but still hashed. This is incompatible with case-insensitive
+	 * mode, so invalidate (unhash) the dentry in CI-mode.
+	 */
+	if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb))
+		d_invalidate(dentry);
+	return 0;
 }
 
 STATIC int
@@ -459,43 +429,22 @@ xfs_vn_symlink(
 	if (unlikely(error))
 		goto out;
 
-	inode = cip->i_vnode;
+	inode = VFS_I(cip);
 
 	error = xfs_init_security(inode, dir);
 	if (unlikely(error))
 		goto out_cleanup_inode;
 
 	d_instantiate(dentry, inode);
-	xfs_validate_fields(dir);
-	xfs_validate_fields(inode);
 	return 0;
 
  out_cleanup_inode:
-	xfs_cleanup_inode(dir, inode, dentry, 0);
+	xfs_cleanup_inode(dir, inode, dentry);
  out:
 	return -error;
 }
 
 STATIC int
-xfs_vn_rmdir(
-	struct inode	*dir,
-	struct dentry	*dentry)
-{
-	struct inode	*inode = dentry->d_inode;
-	struct xfs_name	name;
-	int		error;
-
-	xfs_dentry_to_name(&name, dentry);
-
-	error = xfs_rmdir(XFS_I(dir), &name, XFS_I(inode));
-	if (likely(!error)) {
-		xfs_validate_fields(inode);
-		xfs_validate_fields(dir);
-	}
-	return -error;
-}
-
-STATIC int
 xfs_vn_rename(
 	struct inode	*odir,
 	struct dentry	*odentry,
@@ -505,22 +454,13 @@ xfs_vn_rename(
 	struct inode	*new_inode = ndentry->d_inode;
 	struct xfs_name	oname;
 	struct xfs_name	nname;
-	int		error;
 
 	xfs_dentry_to_name(&oname, odentry);
 	xfs_dentry_to_name(&nname, ndentry);
 
-	error = xfs_rename(XFS_I(odir), &oname, XFS_I(odentry->d_inode),
+	return -xfs_rename(XFS_I(odir), &oname, XFS_I(odentry->d_inode),
 			   XFS_I(ndir), &nname, new_inode ?
 			   			XFS_I(new_inode) : NULL);
-	if (likely(!error)) {
-		if (new_inode)
-			xfs_validate_fields(new_inode);
-		xfs_validate_fields(odir);
-		if (ndir != odir)
-			xfs_validate_fields(ndir);
-	}
-	return -error;
 }
 
 /*
@@ -659,57 +599,9 @@ xfs_vn_getattr(
 STATIC int
 xfs_vn_setattr(
 	struct dentry	*dentry,
-	struct iattr	*attr)
+	struct iattr	*iattr)
 {
-	struct inode	*inode = dentry->d_inode;
-	unsigned int	ia_valid = attr->ia_valid;
-	bhv_vattr_t	vattr = { 0 };
-	int		flags = 0;
-	int		error;
-
-	if (ia_valid & ATTR_UID) {
-		vattr.va_mask |= XFS_AT_UID;
-		vattr.va_uid = attr->ia_uid;
-	}
-	if (ia_valid & ATTR_GID) {
-		vattr.va_mask |= XFS_AT_GID;
-		vattr.va_gid = attr->ia_gid;
-	}
-	if (ia_valid & ATTR_SIZE) {
-		vattr.va_mask |= XFS_AT_SIZE;
-		vattr.va_size = attr->ia_size;
-	}
-	if (ia_valid & ATTR_ATIME) {
-		vattr.va_mask |= XFS_AT_ATIME;
-		vattr.va_atime = attr->ia_atime;
-		inode->i_atime = attr->ia_atime;
-	}
-	if (ia_valid & ATTR_MTIME) {
-		vattr.va_mask |= XFS_AT_MTIME;
-		vattr.va_mtime = attr->ia_mtime;
-	}
-	if (ia_valid & ATTR_CTIME) {
-		vattr.va_mask |= XFS_AT_CTIME;
-		vattr.va_ctime = attr->ia_ctime;
-	}
-	if (ia_valid & ATTR_MODE) {
-		vattr.va_mask |= XFS_AT_MODE;
-		vattr.va_mode = attr->ia_mode;
-		if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
-			inode->i_mode &= ~S_ISGID;
-	}
-
-	if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET))
-		flags |= ATTR_UTIME;
-#ifdef ATTR_NO_BLOCK
-	if ((ia_valid & ATTR_NO_BLOCK))
-		flags |= ATTR_NONBLOCK;
-#endif
-
-	error = xfs_setattr(XFS_I(inode), &vattr, flags, NULL);
-	if (likely(!error))
-		vn_revalidate(vn_from_inode(inode));
-	return -error;
+	return -xfs_setattr(XFS_I(dentry->d_inode), iattr, 0, NULL);
 }
 
 /*
@@ -727,109 +619,6 @@ xfs_vn_truncate(
 	WARN_ON(error);
 }
 
-STATIC int
-xfs_vn_setxattr(
-	struct dentry	*dentry,
-	const char	*name,
-	const void	*data,
-	size_t		size,
-	int		flags)
-{
-	bhv_vnode_t	*vp = vn_from_inode(dentry->d_inode);
-	char		*attr = (char *)name;
-	attrnames_t	*namesp;
-	int		xflags = 0;
-	int		error;
-
-	namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	attr += namesp->attr_namelen;
-	error = namesp->attr_capable(vp, NULL);
-	if (error)
-		return error;
-
-	/* Convert Linux syscall to XFS internal ATTR flags */
-	if (flags & XATTR_CREATE)
-		xflags |= ATTR_CREATE;
-	if (flags & XATTR_REPLACE)
-		xflags |= ATTR_REPLACE;
-	xflags |= namesp->attr_flag;
-	return namesp->attr_set(vp, attr, (void *)data, size, xflags);
-}
-
-STATIC ssize_t
-xfs_vn_getxattr(
-	struct dentry	*dentry,
-	const char	*name,
-	void		*data,
-	size_t		size)
-{
-	bhv_vnode_t	*vp = vn_from_inode(dentry->d_inode);
-	char		*attr = (char *)name;
-	attrnames_t	*namesp;
-	int		xflags = 0;
-	ssize_t		error;
-
-	namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	attr += namesp->attr_namelen;
-	error = namesp->attr_capable(vp, NULL);
-	if (error)
-		return error;
-
-	/* Convert Linux syscall to XFS internal ATTR flags */
-	if (!size) {
-		xflags |= ATTR_KERNOVAL;
-		data = NULL;
-	}
-	xflags |= namesp->attr_flag;
-	return namesp->attr_get(vp, attr, (void *)data, size, xflags);
-}
-
-STATIC ssize_t
-xfs_vn_listxattr(
-	struct dentry		*dentry,
-	char			*data,
-	size_t			size)
-{
-	bhv_vnode_t		*vp = vn_from_inode(dentry->d_inode);
-	int			error, xflags = ATTR_KERNAMELS;
-	ssize_t			result;
-
-	if (!size)
-		xflags |= ATTR_KERNOVAL;
-	xflags |= capable(CAP_SYS_ADMIN) ? ATTR_KERNFULLS : ATTR_KERNORMALS;
-
-	error = attr_generic_list(vp, data, size, xflags, &result);
-	if (error < 0)
-		return error;
-	return result;
-}
-
-STATIC int
-xfs_vn_removexattr(
-	struct dentry	*dentry,
-	const char	*name)
-{
-	bhv_vnode_t	*vp = vn_from_inode(dentry->d_inode);
-	char		*attr = (char *)name;
-	attrnames_t	*namesp;
-	int		xflags = 0;
-	int		error;
-
-	namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	attr += namesp->attr_namelen;
-	error = namesp->attr_capable(vp, NULL);
-	if (error)
-		return error;
-	xflags |= namesp->attr_flag;
-	return namesp->attr_remove(vp, attr, xflags);
-}
-
 STATIC long
 xfs_vn_fallocate(
 	struct inode	*inode,
@@ -853,18 +642,18 @@ xfs_vn_fallocate(
 
 	xfs_ilock(ip, XFS_IOLOCK_EXCL);
 	error = xfs_change_file_space(ip, XFS_IOC_RESVSP, &bf,
-						0, NULL, ATTR_NOLOCK);
+				      0, NULL, XFS_ATTR_NOLOCK);
 	if (!error && !(mode & FALLOC_FL_KEEP_SIZE) &&
 	    offset + len > i_size_read(inode))
 		new_size = offset + len;
 
 	/* Change file size if needed */
 	if (new_size) {
-		bhv_vattr_t	va;
+		struct iattr iattr;
 
-		va.va_mask = XFS_AT_SIZE;
-		va.va_size = new_size;
-		error = xfs_setattr(ip, &va, ATTR_NOLOCK, NULL);
+		iattr.ia_valid = ATTR_SIZE;
+		iattr.ia_size = new_size;
+		error = xfs_setattr(ip, &iattr, XFS_ATTR_NOLOCK, NULL);
 	}
 
 	xfs_iunlock(ip, XFS_IOLOCK_EXCL);
@@ -872,46 +661,172 @@ out_error:
 	return error;
 }
 
-const struct inode_operations xfs_inode_operations = {
+static const struct inode_operations xfs_inode_operations = {
 	.permission		= xfs_vn_permission,
 	.truncate		= xfs_vn_truncate,
 	.getattr		= xfs_vn_getattr,
 	.setattr		= xfs_vn_setattr,
-	.setxattr		= xfs_vn_setxattr,
-	.getxattr		= xfs_vn_getxattr,
+	.setxattr		= generic_setxattr,
+	.getxattr		= generic_getxattr,
+	.removexattr		= generic_removexattr,
 	.listxattr		= xfs_vn_listxattr,
-	.removexattr		= xfs_vn_removexattr,
 	.fallocate		= xfs_vn_fallocate,
 };
 
-const struct inode_operations xfs_dir_inode_operations = {
+static const struct inode_operations xfs_dir_inode_operations = {
 	.create			= xfs_vn_create,
 	.lookup			= xfs_vn_lookup,
 	.link			= xfs_vn_link,
 	.unlink			= xfs_vn_unlink,
 	.symlink		= xfs_vn_symlink,
 	.mkdir			= xfs_vn_mkdir,
-	.rmdir			= xfs_vn_rmdir,
+	/*
+	 * Yes, XFS uses the same method for rmdir and unlink.
+	 *
+	 * There are some subtile differences deeper in the code,
+	 * but we use S_ISDIR to check for those.
+	 */
+	.rmdir			= xfs_vn_unlink,
+	.mknod			= xfs_vn_mknod,
+	.rename			= xfs_vn_rename,
+	.permission		= xfs_vn_permission,
+	.getattr		= xfs_vn_getattr,
+	.setattr		= xfs_vn_setattr,
+	.setxattr		= generic_setxattr,
+	.getxattr		= generic_getxattr,
+	.removexattr		= generic_removexattr,
+	.listxattr		= xfs_vn_listxattr,
+};
+
+static const struct inode_operations xfs_dir_ci_inode_operations = {
+	.create			= xfs_vn_create,
+	.lookup			= xfs_vn_ci_lookup,
+	.link			= xfs_vn_link,
+	.unlink			= xfs_vn_unlink,
+	.symlink		= xfs_vn_symlink,
+	.mkdir			= xfs_vn_mkdir,
+	/*
+	 * Yes, XFS uses the same method for rmdir and unlink.
+	 *
+	 * There are some subtile differences deeper in the code,
+	 * but we use S_ISDIR to check for those.
+	 */
+	.rmdir			= xfs_vn_unlink,
 	.mknod			= xfs_vn_mknod,
 	.rename			= xfs_vn_rename,
 	.permission		= xfs_vn_permission,
 	.getattr		= xfs_vn_getattr,
 	.setattr		= xfs_vn_setattr,
-	.setxattr		= xfs_vn_setxattr,
-	.getxattr		= xfs_vn_getxattr,
+	.setxattr		= generic_setxattr,
+	.getxattr		= generic_getxattr,
+	.removexattr		= generic_removexattr,
 	.listxattr		= xfs_vn_listxattr,
-	.removexattr		= xfs_vn_removexattr,
 };
 
-const struct inode_operations xfs_symlink_inode_operations = {
+static const struct inode_operations xfs_symlink_inode_operations = {
 	.readlink		= generic_readlink,
 	.follow_link		= xfs_vn_follow_link,
 	.put_link		= xfs_vn_put_link,
 	.permission		= xfs_vn_permission,
 	.getattr		= xfs_vn_getattr,
 	.setattr		= xfs_vn_setattr,
-	.setxattr		= xfs_vn_setxattr,
-	.getxattr		= xfs_vn_getxattr,
+	.setxattr		= generic_setxattr,
+	.getxattr		= generic_getxattr,
+	.removexattr		= generic_removexattr,
 	.listxattr		= xfs_vn_listxattr,
-	.removexattr		= xfs_vn_removexattr,
 };
+
+STATIC void
+xfs_diflags_to_iflags(
+	struct inode		*inode,
+	struct xfs_inode	*ip)
+{
+	if (ip->i_d.di_flags & XFS_DIFLAG_IMMUTABLE)
+		inode->i_flags |= S_IMMUTABLE;
+	else
+		inode->i_flags &= ~S_IMMUTABLE;
+	if (ip->i_d.di_flags & XFS_DIFLAG_APPEND)
+		inode->i_flags |= S_APPEND;
+	else
+		inode->i_flags &= ~S_APPEND;
+	if (ip->i_d.di_flags & XFS_DIFLAG_SYNC)
+		inode->i_flags |= S_SYNC;
+	else
+		inode->i_flags &= ~S_SYNC;
+	if (ip->i_d.di_flags & XFS_DIFLAG_NOATIME)
+		inode->i_flags |= S_NOATIME;
+	else
+		inode->i_flags &= ~S_NOATIME;
+}
+
+/*
+ * Initialize the Linux inode, set up the operation vectors and
+ * unlock the inode.
+ *
+ * When reading existing inodes from disk this is called directly
+ * from xfs_iget, when creating a new inode it is called from
+ * xfs_ialloc after setting up the inode.
+ */
+void
+xfs_setup_inode(
+	struct xfs_inode	*ip)
+{
+	struct inode		*inode = ip->i_vnode;
+
+	inode->i_mode	= ip->i_d.di_mode;
+	inode->i_nlink	= ip->i_d.di_nlink;
+	inode->i_uid	= ip->i_d.di_uid;
+	inode->i_gid	= ip->i_d.di_gid;
+
+	switch (inode->i_mode & S_IFMT) {
+	case S_IFBLK:
+	case S_IFCHR:
+		inode->i_rdev =
+			MKDEV(sysv_major(ip->i_df.if_u2.if_rdev) & 0x1ff,
+			      sysv_minor(ip->i_df.if_u2.if_rdev));
+		break;
+	default:
+		inode->i_rdev = 0;
+		break;
+	}
+
+	inode->i_generation = ip->i_d.di_gen;
+	i_size_write(inode, ip->i_d.di_size);
+	inode->i_atime.tv_sec	= ip->i_d.di_atime.t_sec;
+	inode->i_atime.tv_nsec	= ip->i_d.di_atime.t_nsec;
+	inode->i_mtime.tv_sec	= ip->i_d.di_mtime.t_sec;
+	inode->i_mtime.tv_nsec	= ip->i_d.di_mtime.t_nsec;
+	inode->i_ctime.tv_sec	= ip->i_d.di_ctime.t_sec;
+	inode->i_ctime.tv_nsec	= ip->i_d.di_ctime.t_nsec;
+	xfs_diflags_to_iflags(inode, ip);
+	xfs_iflags_clear(ip, XFS_IMODIFIED);
+
+	switch (inode->i_mode & S_IFMT) {
+	case S_IFREG:
+		inode->i_op = &xfs_inode_operations;
+		inode->i_fop = &xfs_file_operations;
+		inode->i_mapping->a_ops = &xfs_address_space_operations;
+		break;
+	case S_IFDIR:
+		if (xfs_sb_version_hasasciici(&XFS_M(inode->i_sb)->m_sb))
+			inode->i_op = &xfs_dir_ci_inode_operations;
+		else
+			inode->i_op = &xfs_dir_inode_operations;
+		inode->i_fop = &xfs_dir_file_operations;
+		break;
+	case S_IFLNK:
+		inode->i_op = &xfs_symlink_inode_operations;
+		if (!(ip->i_df.if_flags & XFS_IFINLINE))
+			inode->i_mapping->a_ops = &xfs_address_space_operations;
+		break;
+	default:
+		inode->i_op = &xfs_inode_operations;
+		init_special_inode(inode, inode->i_mode, inode->i_rdev);
+		break;
+	}
+
+	xfs_iflags_clear(ip, XFS_INEW);
+	barrier();
+
+	unlock_new_inode(inode);
+}
diff --git a/fs/xfs/linux-2.6/xfs_iops.h b/fs/xfs/linux-2.6/xfs_iops.h
index 14d0deb7aff..8b1a1e31dc2 100644
--- a/fs/xfs/linux-2.6/xfs_iops.h
+++ b/fs/xfs/linux-2.6/xfs_iops.h
@@ -18,23 +18,14 @@
 #ifndef __XFS_IOPS_H__
 #define __XFS_IOPS_H__
 
-extern const struct inode_operations xfs_inode_operations;
-extern const struct inode_operations xfs_dir_inode_operations;
-extern const struct inode_operations xfs_symlink_inode_operations;
+struct xfs_inode;
 
 extern const struct file_operations xfs_file_operations;
 extern const struct file_operations xfs_dir_file_operations;
 extern const struct file_operations xfs_invis_file_operations;
 
+extern ssize_t xfs_vn_listxattr(struct dentry *, char *data, size_t size);
 
-struct xfs_inode;
-extern void xfs_ichgtime(struct xfs_inode *, int);
-extern void xfs_ichgtime_fast(struct xfs_inode *, struct inode *, int);
-
-#define xfs_vtoi(vp) \
-	((struct xfs_inode *)vn_to_inode(vp)->i_private)
-
-#define XFS_I(inode) \
-	((struct xfs_inode *)(inode)->i_private)
+extern void xfs_setup_inode(struct xfs_inode *);
 
 #endif /* __XFS_IOPS_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h
index 4edc46915b5..cc0f7b3a979 100644
--- a/fs/xfs/linux-2.6/xfs_linux.h
+++ b/fs/xfs/linux-2.6/xfs_linux.h
@@ -45,13 +45,13 @@
 #include <mrlock.h>
 #include <sv.h>
 #include <mutex.h>
-#include <sema.h>
 #include <time.h>
 
 #include <support/ktrace.h>
 #include <support/debug.h>
 #include <support/uuid.h>
 
+#include <linux/semaphore.h>
 #include <linux/mm.h>
 #include <linux/kernel.h>
 #include <linux/blkdev.h>
@@ -76,6 +76,7 @@
 #include <linux/log2.h>
 #include <linux/spinlock.h>
 #include <linux/random.h>
+#include <linux/ctype.h>
 
 #include <asm/page.h>
 #include <asm/div64.h>
@@ -125,8 +126,6 @@
 
 #define current_cpu()		(raw_smp_processor_id())
 #define current_pid()		(current->pid)
-#define current_fsuid(cred)	(current->fsuid)
-#define current_fsgid(cred)	(current->fsgid)
 #define current_test_flags(f)	(current->flags & (f))
 #define current_set_flags_nested(sp, f)		\
 		(*(sp) = current->flags, current->flags |= (f))
@@ -179,7 +178,7 @@
 #define xfs_sort(a,n,s,fn)	sort(a,n,s,fn,NULL)
 #define xfs_stack_trace()	dump_stack()
 #define xfs_itruncate_data(ip, off)	\
-	(-vmtruncate(vn_to_inode(XFS_ITOV(ip)), (off)))
+	(-vmtruncate(VFS_I(ip), (off)))
 
 
 /* Move the kernel do_div definition off to one side */
@@ -299,4 +298,11 @@ static inline __uint64_t howmany_64(__uint64_t x, __uint32_t y)
 	return x;
 }
 
+/* ARM old ABI has some weird alignment/padding */
+#if defined(__arm__) && !defined(__ARM_EABI__)
+#define __arch_pack __attribute__((packed))
+#else
+#define __arch_pack
+#endif
+
 #endif /* __XFS_LINUX__ */
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 82333b3e118..1957e5357d0 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -137,7 +137,7 @@ xfs_iozero(
 	struct address_space	*mapping;
 	int			status;
 
-	mapping = ip->i_vnode->i_mapping;
+	mapping = VFS_I(ip)->i_mapping;
 	do {
 		unsigned offset, bytes;
 		void *fsdata;
@@ -674,9 +674,7 @@ start:
 	 */
 	if (likely(!(ioflags & IO_INVIS) &&
 		   !mnt_want_write(file->f_path.mnt))) {
-		file_update_time(file);
-		xfs_ichgtime_fast(xip, inode,
-				  XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
+		xfs_ichgtime(xip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
 		mnt_drop_write(file->f_path.mnt);
 	}
 
diff --git a/fs/xfs/linux-2.6/xfs_stats.c b/fs/xfs/linux-2.6/xfs_stats.c
index e480b610205..3d5b67c075c 100644
--- a/fs/xfs/linux-2.6/xfs_stats.c
+++ b/fs/xfs/linux-2.6/xfs_stats.c
@@ -98,12 +98,21 @@ xfs_read_xfsstats(
 	return len;
 }
 
-void
+int
 xfs_init_procfs(void)
 {
 	if (!proc_mkdir("fs/xfs", NULL))
-		return;
-	create_proc_read_entry("fs/xfs/stat", 0, NULL, xfs_read_xfsstats, NULL);
+		goto out;
+
+	if (!create_proc_read_entry("fs/xfs/stat", 0, NULL,
+			xfs_read_xfsstats, NULL))
+		goto out_remove_entry;
+	return 0;
+
+ out_remove_entry:
+	remove_proc_entry("fs/xfs", NULL);
+ out:
+	return -ENOMEM;
 }
 
 void
diff --git a/fs/xfs/linux-2.6/xfs_stats.h b/fs/xfs/linux-2.6/xfs_stats.h
index afd0b0d5fdb..e83820febc9 100644
--- a/fs/xfs/linux-2.6/xfs_stats.h
+++ b/fs/xfs/linux-2.6/xfs_stats.h
@@ -134,7 +134,7 @@ DECLARE_PER_CPU(struct xfsstats, xfsstats);
 #define XFS_STATS_DEC(v)	(per_cpu(xfsstats, current_cpu()).v--)
 #define XFS_STATS_ADD(v, inc)	(per_cpu(xfsstats, current_cpu()).v += (inc))
 
-extern void xfs_init_procfs(void);
+extern int xfs_init_procfs(void);
 extern void xfs_cleanup_procfs(void);
 
 
@@ -144,8 +144,14 @@ extern void xfs_cleanup_procfs(void);
 # define XFS_STATS_DEC(count)
 # define XFS_STATS_ADD(count, inc)
 
-static inline void xfs_init_procfs(void) { };
-static inline void xfs_cleanup_procfs(void) { };
+static inline int xfs_init_procfs(void)
+{
+	return 0;
+}
+
+static inline void xfs_cleanup_procfs(void)
+{
+}
 
 #endif	/* !CONFIG_PROC_FS */
 
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 943381284e2..18d3c848783 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -52,6 +52,12 @@
 #include "xfs_version.h"
 #include "xfs_log_priv.h"
 #include "xfs_trans_priv.h"
+#include "xfs_filestream.h"
+#include "xfs_da_btree.h"
+#include "xfs_dir2_trace.h"
+#include "xfs_extfree_item.h"
+#include "xfs_mru_cache.h"
+#include "xfs_inode_item.h"
 
 #include <linux/namei.h>
 #include <linux/init.h>
@@ -60,6 +66,7 @@
 #include <linux/writeback.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
+#include <linux/parser.h>
 
 static struct quotactl_ops xfs_quotactl_operations;
 static struct super_operations xfs_super_operations;
@@ -74,7 +81,10 @@ xfs_args_allocate(
 {
 	struct xfs_mount_args	*args;
 
-	args = kmem_zalloc(sizeof(struct xfs_mount_args), KM_SLEEP);
+	args = kzalloc(sizeof(struct xfs_mount_args), GFP_KERNEL);
+	if (!args)
+		return NULL;
+
 	args->logbufs = args->logbufsize = -1;
 	strncpy(args->fsname, sb->s_id, MAXNAMELEN);
 
@@ -138,6 +148,23 @@ xfs_args_allocate(
 #define MNTOPT_XDSM	"xdsm"		/* DMI enabled (DMAPI / XDSM) */
 #define MNTOPT_DMI	"dmi"		/* DMI enabled (DMAPI / XDSM) */
 
+/*
+ * Table driven mount option parser.
+ *
+ * Currently only used for remount, but it will be used for mount
+ * in the future, too.
+ */
+enum {
+	Opt_barrier, Opt_nobarrier, Opt_err
+};
+
+static match_table_t tokens = {
+	{Opt_barrier, "barrier"},
+	{Opt_nobarrier, "nobarrier"},
+	{Opt_err, NULL}
+};
+
+
 STATIC unsigned long
 suffix_strtoul(char *s, char **endp, unsigned int base)
 {
@@ -314,6 +341,7 @@ xfs_parseargs(
 			args->flags |= XFSMNT_ATTR2;
 		} else if (!strcmp(this_char, MNTOPT_NOATTR2)) {
 			args->flags &= ~XFSMNT_ATTR2;
+			args->flags |= XFSMNT_NOATTR2;
 		} else if (!strcmp(this_char, MNTOPT_FILESTREAM)) {
 			args->flags2 |= XFSMNT2_FILESTREAMS;
 		} else if (!strcmp(this_char, MNTOPT_NOQUOTA)) {
@@ -553,115 +581,6 @@ xfs_max_file_offset(
 	return (((__uint64_t)pagefactor) << bitshift) - 1;
 }
 
-STATIC_INLINE void
-xfs_set_inodeops(
-	struct inode		*inode)
-{
-	switch (inode->i_mode & S_IFMT) {
-	case S_IFREG:
-		inode->i_op = &xfs_inode_operations;
-		inode->i_fop = &xfs_file_operations;
-		inode->i_mapping->a_ops = &xfs_address_space_operations;
-		break;
-	case S_IFDIR:
-		inode->i_op = &xfs_dir_inode_operations;
-		inode->i_fop = &xfs_dir_file_operations;
-		break;
-	case S_IFLNK:
-		inode->i_op = &xfs_symlink_inode_operations;
-		if (!(XFS_I(inode)->i_df.if_flags & XFS_IFINLINE))
-			inode->i_mapping->a_ops = &xfs_address_space_operations;
-		break;
-	default:
-		inode->i_op = &xfs_inode_operations;
-		init_special_inode(inode, inode->i_mode, inode->i_rdev);
-		break;
-	}
-}
-
-STATIC_INLINE void
-xfs_revalidate_inode(
-	xfs_mount_t		*mp,
-	bhv_vnode_t		*vp,
-	xfs_inode_t		*ip)
-{
-	struct inode		*inode = vn_to_inode(vp);
-
-	inode->i_mode	= ip->i_d.di_mode;
-	inode->i_nlink	= ip->i_d.di_nlink;
-	inode->i_uid	= ip->i_d.di_uid;
-	inode->i_gid	= ip->i_d.di_gid;
-
-	switch (inode->i_mode & S_IFMT) {
-	case S_IFBLK:
-	case S_IFCHR:
-		inode->i_rdev =
-			MKDEV(sysv_major(ip->i_df.if_u2.if_rdev) & 0x1ff,
-			      sysv_minor(ip->i_df.if_u2.if_rdev));
-		break;
-	default:
-		inode->i_rdev = 0;
-		break;
-	}
-
-	inode->i_generation = ip->i_d.di_gen;
-	i_size_write(inode, ip->i_d.di_size);
-	inode->i_atime.tv_sec	= ip->i_d.di_atime.t_sec;
-	inode->i_atime.tv_nsec	= ip->i_d.di_atime.t_nsec;
-	inode->i_mtime.tv_sec	= ip->i_d.di_mtime.t_sec;
-	inode->i_mtime.tv_nsec	= ip->i_d.di_mtime.t_nsec;
-	inode->i_ctime.tv_sec	= ip->i_d.di_ctime.t_sec;
-	inode->i_ctime.tv_nsec	= ip->i_d.di_ctime.t_nsec;
-	if (ip->i_d.di_flags & XFS_DIFLAG_IMMUTABLE)
-		inode->i_flags |= S_IMMUTABLE;
-	else
-		inode->i_flags &= ~S_IMMUTABLE;
-	if (ip->i_d.di_flags & XFS_DIFLAG_APPEND)
-		inode->i_flags |= S_APPEND;
-	else
-		inode->i_flags &= ~S_APPEND;
-	if (ip->i_d.di_flags & XFS_DIFLAG_SYNC)
-		inode->i_flags |= S_SYNC;
-	else
-		inode->i_flags &= ~S_SYNC;
-	if (ip->i_d.di_flags & XFS_DIFLAG_NOATIME)
-		inode->i_flags |= S_NOATIME;
-	else
-		inode->i_flags &= ~S_NOATIME;
-	xfs_iflags_clear(ip, XFS_IMODIFIED);
-}
-
-void
-xfs_initialize_vnode(
-	struct xfs_mount	*mp,
-	bhv_vnode_t		*vp,
-	struct xfs_inode	*ip)
-{
-	struct inode		*inode = vn_to_inode(vp);
-
-	if (!ip->i_vnode) {
-		ip->i_vnode = vp;
-		inode->i_private = ip;
-	}
-
-	/*
-	 * We need to set the ops vectors, and unlock the inode, but if
-	 * we have been called during the new inode create process, it is
-	 * too early to fill in the Linux inode.  We will get called a
-	 * second time once the inode is properly set up, and then we can
-	 * finish our work.
-	 */
-	if (ip->i_d.di_mode != 0 && (inode->i_state & I_NEW)) {
-		xfs_revalidate_inode(mp, vp, ip);
-		xfs_set_inodeops(inode);
-
-		xfs_iflags_clear(ip, XFS_INEW);
-		barrier();
-
-		unlock_new_inode(inode);
-	}
-}
-
 int
 xfs_blkdev_get(
 	xfs_mount_t		*mp,
@@ -733,14 +652,6 @@ xfs_mountfs_check_barriers(xfs_mount_t *mp)
 		return;
 	}
 
-	if (mp->m_ddev_targp->bt_bdev->bd_disk->queue->ordered ==
-					QUEUE_ORDERED_NONE) {
-		xfs_fs_cmn_err(CE_NOTE, mp,
-		  "Disabling barriers, not supported by the underlying device");
-		mp->m_flags &= ~XFS_MOUNT_BARRIER;
-		return;
-	}
-
 	if (xfs_readonly_buftarg(mp->m_ddev_targp)) {
 		xfs_fs_cmn_err(CE_NOTE, mp,
 		  "Disabling barriers, underlying device is readonly");
@@ -764,6 +675,139 @@ xfs_blkdev_issue_flush(
 	blkdev_issue_flush(buftarg->bt_bdev, NULL);
 }
 
+STATIC void
+xfs_close_devices(
+	struct xfs_mount	*mp)
+{
+	if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
+		struct block_device *logdev = mp->m_logdev_targp->bt_bdev;
+		xfs_free_buftarg(mp->m_logdev_targp);
+		xfs_blkdev_put(logdev);
+	}
+	if (mp->m_rtdev_targp) {
+		struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev;
+		xfs_free_buftarg(mp->m_rtdev_targp);
+		xfs_blkdev_put(rtdev);
+	}
+	xfs_free_buftarg(mp->m_ddev_targp);
+}
+
+/*
+ * The file system configurations are:
+ *	(1) device (partition) with data and internal log
+ *	(2) logical volume with data and log subvolumes.
+ *	(3) logical volume with data, log, and realtime subvolumes.
+ *
+ * We only have to handle opening the log and realtime volumes here if
+ * they are present.  The data subvolume has already been opened by
+ * get_sb_bdev() and is stored in sb->s_bdev.
+ */
+STATIC int
+xfs_open_devices(
+	struct xfs_mount	*mp,
+	struct xfs_mount_args	*args)
+{
+	struct block_device	*ddev = mp->m_super->s_bdev;
+	struct block_device	*logdev = NULL, *rtdev = NULL;
+	int			error;
+
+	/*
+	 * Open real time and log devices - order is important.
+	 */
+	if (args->logname[0]) {
+		error = xfs_blkdev_get(mp, args->logname, &logdev);
+		if (error)
+			goto out;
+	}
+
+	if (args->rtname[0]) {
+		error = xfs_blkdev_get(mp, args->rtname, &rtdev);
+		if (error)
+			goto out_close_logdev;
+
+		if (rtdev == ddev || rtdev == logdev) {
+			cmn_err(CE_WARN,
+	"XFS: Cannot mount filesystem with identical rtdev and ddev/logdev.");
+			error = EINVAL;
+			goto out_close_rtdev;
+		}
+	}
+
+	/*
+	 * Setup xfs_mount buffer target pointers
+	 */
+	error = ENOMEM;
+	mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0);
+	if (!mp->m_ddev_targp)
+		goto out_close_rtdev;
+
+	if (rtdev) {
+		mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1);
+		if (!mp->m_rtdev_targp)
+			goto out_free_ddev_targ;
+	}
+
+	if (logdev && logdev != ddev) {
+		mp->m_logdev_targp = xfs_alloc_buftarg(logdev, 1);
+		if (!mp->m_logdev_targp)
+			goto out_free_rtdev_targ;
+	} else {
+		mp->m_logdev_targp = mp->m_ddev_targp;
+	}
+
+	return 0;
+
+ out_free_rtdev_targ:
+	if (mp->m_rtdev_targp)
+		xfs_free_buftarg(mp->m_rtdev_targp);
+ out_free_ddev_targ:
+	xfs_free_buftarg(mp->m_ddev_targp);
+ out_close_rtdev:
+	if (rtdev)
+		xfs_blkdev_put(rtdev);
+ out_close_logdev:
+	if (logdev && logdev != ddev)
+		xfs_blkdev_put(logdev);
+ out:
+	return error;
+}
+
+/*
+ * Setup xfs_mount buffer target pointers based on superblock
+ */
+STATIC int
+xfs_setup_devices(
+	struct xfs_mount	*mp)
+{
+	int			error;
+
+	error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize,
+				    mp->m_sb.sb_sectsize);
+	if (error)
+		return error;
+
+	if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
+		unsigned int	log_sector_size = BBSIZE;
+
+		if (xfs_sb_version_hassector(&mp->m_sb))
+			log_sector_size = mp->m_sb.sb_logsectsize;
+		error = xfs_setsize_buftarg(mp->m_logdev_targp,
+					    mp->m_sb.sb_blocksize,
+					    log_sector_size);
+		if (error)
+			return error;
+	}
+	if (mp->m_rtdev_targp) {
+		error = xfs_setsize_buftarg(mp->m_rtdev_targp,
+					    mp->m_sb.sb_blocksize,
+					    mp->m_sb.sb_sectsize);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
 /*
  * XFS AIL push thread support
  */
@@ -826,62 +870,21 @@ STATIC struct inode *
 xfs_fs_alloc_inode(
 	struct super_block	*sb)
 {
-	bhv_vnode_t		*vp;
-
-	vp = kmem_zone_alloc(xfs_vnode_zone, KM_SLEEP);
-	if (unlikely(!vp))
-		return NULL;
-	return vn_to_inode(vp);
+	return kmem_zone_alloc(xfs_vnode_zone, KM_SLEEP);
 }
 
 STATIC void
 xfs_fs_destroy_inode(
 	struct inode		*inode)
 {
-	kmem_zone_free(xfs_vnode_zone, vn_from_inode(inode));
+	kmem_zone_free(xfs_vnode_zone, inode);
 }
 
 STATIC void
 xfs_fs_inode_init_once(
 	void			*vnode)
 {
-	inode_init_once(vn_to_inode((bhv_vnode_t *)vnode));
-}
-
-STATIC int __init
-xfs_init_zones(void)
-{
-	xfs_vnode_zone = kmem_zone_init_flags(sizeof(bhv_vnode_t), "xfs_vnode",
-					KM_ZONE_HWALIGN | KM_ZONE_RECLAIM |
-					KM_ZONE_SPREAD,
-					xfs_fs_inode_init_once);
-	if (!xfs_vnode_zone)
-		goto out;
-
-	xfs_ioend_zone = kmem_zone_init(sizeof(xfs_ioend_t), "xfs_ioend");
-	if (!xfs_ioend_zone)
-		goto out_destroy_vnode_zone;
-
-	xfs_ioend_pool = mempool_create_slab_pool(4 * MAX_BUF_PER_PAGE,
-						  xfs_ioend_zone);
-	if (!xfs_ioend_pool)
-		goto out_free_ioend_zone;
-	return 0;
-
- out_free_ioend_zone:
-	kmem_zone_destroy(xfs_ioend_zone);
- out_destroy_vnode_zone:
-	kmem_zone_destroy(xfs_vnode_zone);
- out:
-	return -ENOMEM;
-}
-
-STATIC void
-xfs_destroy_zones(void)
-{
-	mempool_destroy(xfs_ioend_pool);
-	kmem_zone_destroy(xfs_vnode_zone);
-	kmem_zone_destroy(xfs_ioend_zone);
+	inode_init_once((struct inode *)vnode);
 }
 
 /*
@@ -986,7 +989,7 @@ void
 xfs_flush_inode(
 	xfs_inode_t	*ip)
 {
-	struct inode	*inode = ip->i_vnode;
+	struct inode	*inode = VFS_I(ip);
 
 	igrab(inode);
 	xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inode_work);
@@ -1011,7 +1014,7 @@ void
 xfs_flush_device(
 	xfs_inode_t	*ip)
 {
-	struct inode	*inode = vn_to_inode(XFS_ITOV(ip));
+	struct inode	*inode = VFS_I(ip);
 
 	igrab(inode);
 	xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_device_work);
@@ -1073,7 +1076,7 @@ xfssyncd(
 			list_del(&work->w_list);
 			if (work == &mp->m_sync_work)
 				continue;
-			kmem_free(work, sizeof(struct bhv_vfs_sync_work));
+			kmem_free(work);
 		}
 	}
 
@@ -1081,18 +1084,76 @@ xfssyncd(
 }
 
 STATIC void
+xfs_free_fsname(
+	struct xfs_mount	*mp)
+{
+	kfree(mp->m_fsname);
+	kfree(mp->m_rtname);
+	kfree(mp->m_logname);
+}
+
+STATIC void
 xfs_fs_put_super(
 	struct super_block	*sb)
 {
 	struct xfs_mount	*mp = XFS_M(sb);
+	struct xfs_inode	*rip = mp->m_rootip;
+	int			unmount_event_flags = 0;
 	int			error;
 
 	kthread_stop(mp->m_sync_task);
 
 	xfs_sync(mp, SYNC_ATTR | SYNC_DELWRI);
-	error = xfs_unmount(mp, 0, NULL);
-	if (error)
-		printk("XFS: unmount got error=%d\n", error);
+
+#ifdef HAVE_DMAPI
+	if (mp->m_flags & XFS_MOUNT_DMAPI) {
+		unmount_event_flags =
+			(mp->m_dmevmask & (1 << DM_EVENT_UNMOUNT)) ?
+				0 : DM_FLAGS_UNWANTED;
+		/*
+		 * Ignore error from dmapi here, first unmount is not allowed
+		 * to fail anyway, and second we wouldn't want to fail a
+		 * unmount because of dmapi.
+		 */
+		XFS_SEND_PREUNMOUNT(mp, rip, DM_RIGHT_NULL, rip, DM_RIGHT_NULL,
+				NULL, NULL, 0, 0, unmount_event_flags);
+	}
+#endif
+
+	/*
+	 * Blow away any referenced inode in the filestreams cache.
+	 * This can and will cause log traffic as inodes go inactive
+	 * here.
+	 */
+	xfs_filestream_unmount(mp);
+
+	XFS_bflush(mp->m_ddev_targp);
+	error = xfs_unmount_flush(mp, 0);
+	WARN_ON(error);
+
+	/*
+	 * If we're forcing a shutdown, typically because of a media error,
+	 * we want to make sure we invalidate dirty pages that belong to
+	 * referenced vnodes as well.
+	 */
+	if (XFS_FORCED_SHUTDOWN(mp)) {
+		error = xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE);
+		ASSERT(error != EFSCORRUPTED);
+	}
+
+	if (mp->m_flags & XFS_MOUNT_DMAPI) {
+		XFS_SEND_UNMOUNT(mp, rip, DM_RIGHT_NULL, 0, 0,
+				unmount_event_flags);
+	}
+
+	xfs_unmountfs(mp);
+	xfs_freesb(mp);
+	xfs_icsb_destroy_counters(mp);
+	xfs_close_devices(mp);
+	xfs_qmops_put(mp);
+	xfs_dmops_put(mp);
+	xfs_free_fsname(mp);
+	kfree(mp);
 }
 
 STATIC void
@@ -1215,14 +1276,74 @@ xfs_fs_remount(
 	char			*options)
 {
 	struct xfs_mount	*mp = XFS_M(sb);
-	struct xfs_mount_args	*args = xfs_args_allocate(sb, 0);
-	int			error;
+	substring_t		args[MAX_OPT_ARGS];
+	char			*p;
 
-	error = xfs_parseargs(mp, options, args, 1);
-	if (!error)
-		error = xfs_mntupdate(mp, flags, args);
-	kmem_free(args, sizeof(*args));
-	return -error;
+	while ((p = strsep(&options, ",")) != NULL) {
+		int token;
+
+		if (!*p)
+			continue;
+
+		token = match_token(p, tokens, args);
+		switch (token) {
+		case Opt_barrier:
+			mp->m_flags |= XFS_MOUNT_BARRIER;
+
+			/*
+			 * Test if barriers are actually working if we can,
+			 * else delay this check until the filesystem is
+			 * marked writeable.
+			 */
+			if (!(mp->m_flags & XFS_MOUNT_RDONLY))
+				xfs_mountfs_check_barriers(mp);
+			break;
+		case Opt_nobarrier:
+			mp->m_flags &= ~XFS_MOUNT_BARRIER;
+			break;
+		default:
+			/*
+			 * Logically we would return an error here to prevent
+			 * users from believing they might have changed
+			 * mount options using remount which can't be changed.
+			 *
+			 * But unfortunately mount(8) adds all options from
+			 * mtab and fstab to the mount arguments in some cases
+			 * so we can't blindly reject options, but have to
+			 * check for each specified option if it actually
+			 * differs from the currently set option and only
+			 * reject it if that's the case.
+			 *
+			 * Until that is implemented we return success for
+			 * every remount request, and silently ignore all
+			 * options that we can't actually change.
+			 */
+#if 0
+			printk(KERN_INFO
+	"XFS: mount option \"%s\" not supported for remount\n", p);
+			return -EINVAL;
+#else
+			return 0;
+#endif
+		}
+	}
+
+	/* rw/ro -> rw */
+	if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) {
+		mp->m_flags &= ~XFS_MOUNT_RDONLY;
+		if (mp->m_flags & XFS_MOUNT_BARRIER)
+			xfs_mountfs_check_barriers(mp);
+	}
+
+	/* rw -> ro */
+	if (!(mp->m_flags & XFS_MOUNT_RDONLY) && (*flags & MS_RDONLY)) {
+		xfs_filestream_flush(mp);
+		xfs_sync(mp, SYNC_DATA_QUIESCE);
+		xfs_attr_quiesce(mp);
+		mp->m_flags |= XFS_MOUNT_RDONLY;
+	}
+
+	return 0;
 }
 
 /*
@@ -1299,6 +1420,245 @@ xfs_fs_setxquota(
 				   Q_XSETPQLIM), id, (caddr_t)fdq);
 }
 
+/*
+ * This function fills in xfs_mount_t fields based on mount args.
+ * Note: the superblock has _not_ yet been read in.
+ */
+STATIC int
+xfs_start_flags(
+	struct xfs_mount_args	*ap,
+	struct xfs_mount	*mp)
+{
+	int			error;
+
+	/* Values are in BBs */
+	if ((ap->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) {
+		/*
+		 * At this point the superblock has not been read
+		 * in, therefore we do not know the block size.
+		 * Before the mount call ends we will convert
+		 * these to FSBs.
+		 */
+		mp->m_dalign = ap->sunit;
+		mp->m_swidth = ap->swidth;
+	}
+
+	if (ap->logbufs != -1 &&
+	    ap->logbufs != 0 &&
+	    (ap->logbufs < XLOG_MIN_ICLOGS ||
+	     ap->logbufs > XLOG_MAX_ICLOGS)) {
+		cmn_err(CE_WARN,
+			"XFS: invalid logbufs value: %d [not %d-%d]",
+			ap->logbufs, XLOG_MIN_ICLOGS, XLOG_MAX_ICLOGS);
+		return XFS_ERROR(EINVAL);
+	}
+	mp->m_logbufs = ap->logbufs;
+	if (ap->logbufsize != -1 &&
+	    ap->logbufsize !=  0 &&
+	    (ap->logbufsize < XLOG_MIN_RECORD_BSIZE ||
+	     ap->logbufsize > XLOG_MAX_RECORD_BSIZE ||
+	     !is_power_of_2(ap->logbufsize))) {
+		cmn_err(CE_WARN,
+	"XFS: invalid logbufsize: %d [not 16k,32k,64k,128k or 256k]",
+			ap->logbufsize);
+		return XFS_ERROR(EINVAL);
+	}
+
+	error = ENOMEM;
+
+	mp->m_logbsize = ap->logbufsize;
+	mp->m_fsname_len = strlen(ap->fsname) + 1;
+
+	mp->m_fsname = kstrdup(ap->fsname, GFP_KERNEL);
+	if (!mp->m_fsname)
+		goto out;
+
+	if (ap->rtname[0]) {
+		mp->m_rtname = kstrdup(ap->rtname, GFP_KERNEL);
+		if (!mp->m_rtname)
+			goto out_free_fsname;
+
+	}
+
+	if (ap->logname[0]) {
+		mp->m_logname = kstrdup(ap->logname, GFP_KERNEL);
+		if (!mp->m_logname)
+			goto out_free_rtname;
+	}
+
+	if (ap->flags & XFSMNT_WSYNC)
+		mp->m_flags |= XFS_MOUNT_WSYNC;
+#if XFS_BIG_INUMS
+	if (ap->flags & XFSMNT_INO64) {
+		mp->m_flags |= XFS_MOUNT_INO64;
+		mp->m_inoadd = XFS_INO64_OFFSET;
+	}
+#endif
+	if (ap->flags & XFSMNT_RETERR)
+		mp->m_flags |= XFS_MOUNT_RETERR;
+	if (ap->flags & XFSMNT_NOALIGN)
+		mp->m_flags |= XFS_MOUNT_NOALIGN;
+	if (ap->flags & XFSMNT_SWALLOC)
+		mp->m_flags |= XFS_MOUNT_SWALLOC;
+	if (ap->flags & XFSMNT_OSYNCISOSYNC)
+		mp->m_flags |= XFS_MOUNT_OSYNCISOSYNC;
+	if (ap->flags & XFSMNT_32BITINODES)
+		mp->m_flags |= XFS_MOUNT_32BITINODES;
+
+	if (ap->flags & XFSMNT_IOSIZE) {
+		if (ap->iosizelog > XFS_MAX_IO_LOG ||
+		    ap->iosizelog < XFS_MIN_IO_LOG) {
+			cmn_err(CE_WARN,
+		"XFS: invalid log iosize: %d [not %d-%d]",
+				ap->iosizelog, XFS_MIN_IO_LOG,
+				XFS_MAX_IO_LOG);
+			return XFS_ERROR(EINVAL);
+		}
+
+		mp->m_flags |= XFS_MOUNT_DFLT_IOSIZE;
+		mp->m_readio_log = mp->m_writeio_log = ap->iosizelog;
+	}
+
+	if (ap->flags & XFSMNT_IKEEP)
+		mp->m_flags |= XFS_MOUNT_IKEEP;
+	if (ap->flags & XFSMNT_DIRSYNC)
+		mp->m_flags |= XFS_MOUNT_DIRSYNC;
+	if (ap->flags & XFSMNT_ATTR2)
+		mp->m_flags |= XFS_MOUNT_ATTR2;
+	if (ap->flags & XFSMNT_NOATTR2)
+		mp->m_flags |= XFS_MOUNT_NOATTR2;
+
+	if (ap->flags2 & XFSMNT2_COMPAT_IOSIZE)
+		mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE;
+
+	/*
+	 * no recovery flag requires a read-only mount
+	 */
+	if (ap->flags & XFSMNT_NORECOVERY) {
+		if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
+			cmn_err(CE_WARN,
+	"XFS: tried to mount a FS read-write without recovery!");
+			return XFS_ERROR(EINVAL);
+		}
+		mp->m_flags |= XFS_MOUNT_NORECOVERY;
+	}
+
+	if (ap->flags & XFSMNT_NOUUID)
+		mp->m_flags |= XFS_MOUNT_NOUUID;
+	if (ap->flags & XFSMNT_BARRIER)
+		mp->m_flags |= XFS_MOUNT_BARRIER;
+	else
+		mp->m_flags &= ~XFS_MOUNT_BARRIER;
+
+	if (ap->flags2 & XFSMNT2_FILESTREAMS)
+		mp->m_flags |= XFS_MOUNT_FILESTREAMS;
+
+	if (ap->flags & XFSMNT_DMAPI)
+		mp->m_flags |= XFS_MOUNT_DMAPI;
+	return 0;
+
+
+ out_free_rtname:
+	kfree(mp->m_rtname);
+ out_free_fsname:
+	kfree(mp->m_fsname);
+ out:
+	return error;
+}
+
+/*
+ * This function fills in xfs_mount_t fields based on mount args.
+ * Note: the superblock _has_ now been read in.
+ */
+STATIC int
+xfs_finish_flags(
+	struct xfs_mount_args	*ap,
+	struct xfs_mount	*mp)
+{
+	int			ronly = (mp->m_flags & XFS_MOUNT_RDONLY);
+
+	/* Fail a mount where the logbuf is smaller then the log stripe */
+	if (xfs_sb_version_haslogv2(&mp->m_sb)) {
+		if ((ap->logbufsize <= 0) &&
+		    (mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) {
+			mp->m_logbsize = mp->m_sb.sb_logsunit;
+		} else if (ap->logbufsize > 0 &&
+			   ap->logbufsize < mp->m_sb.sb_logsunit) {
+			cmn_err(CE_WARN,
+	"XFS: logbuf size must be greater than or equal to log stripe size");
+			return XFS_ERROR(EINVAL);
+		}
+	} else {
+		/* Fail a mount if the logbuf is larger than 32K */
+		if (ap->logbufsize > XLOG_BIG_RECORD_BSIZE) {
+			cmn_err(CE_WARN,
+	"XFS: logbuf size for version 1 logs must be 16K or 32K");
+			return XFS_ERROR(EINVAL);
+		}
+	}
+
+	/*
+	 * mkfs'ed attr2 will turn on attr2 mount unless explicitly
+	 * told by noattr2 to turn it off
+	 */
+	if (xfs_sb_version_hasattr2(&mp->m_sb) &&
+	    !(ap->flags & XFSMNT_NOATTR2))
+		mp->m_flags |= XFS_MOUNT_ATTR2;
+
+	/*
+	 * prohibit r/w mounts of read-only filesystems
+	 */
+	if ((mp->m_sb.sb_flags & XFS_SBF_READONLY) && !ronly) {
+		cmn_err(CE_WARN,
+	"XFS: cannot mount a read-only filesystem as read-write");
+		return XFS_ERROR(EROFS);
+	}
+
+	/*
+	 * check for shared mount.
+	 */
+	if (ap->flags & XFSMNT_SHARED) {
+		if (!xfs_sb_version_hasshared(&mp->m_sb))
+			return XFS_ERROR(EINVAL);
+
+		/*
+		 * For IRIX 6.5, shared mounts must have the shared
+		 * version bit set, have the persistent readonly
+		 * field set, must be version 0 and can only be mounted
+		 * read-only.
+		 */
+		if (!ronly || !(mp->m_sb.sb_flags & XFS_SBF_READONLY) ||
+		     (mp->m_sb.sb_shared_vn != 0))
+			return XFS_ERROR(EINVAL);
+
+		mp->m_flags |= XFS_MOUNT_SHARED;
+
+		/*
+		 * Shared XFS V0 can't deal with DMI.  Return EINVAL.
+		 */
+		if (mp->m_sb.sb_shared_vn == 0 && (ap->flags & XFSMNT_DMAPI))
+			return XFS_ERROR(EINVAL);
+	}
+
+	if (ap->flags & XFSMNT_UQUOTA) {
+		mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE);
+		if (ap->flags & XFSMNT_UQUOTAENF)
+			mp->m_qflags |= XFS_UQUOTA_ENFD;
+	}
+
+	if (ap->flags & XFSMNT_GQUOTA) {
+		mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE);
+		if (ap->flags & XFSMNT_GQUOTAENF)
+			mp->m_qflags |= XFS_OQUOTA_ENFD;
+	} else if (ap->flags & XFSMNT_PQUOTA) {
+		mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE);
+		if (ap->flags & XFSMNT_PQUOTAENF)
+			mp->m_qflags |= XFS_OQUOTA_ENFD;
+	}
+
+	return 0;
+}
+
 STATIC int
 xfs_fs_fill_super(
 	struct super_block	*sb,
@@ -1307,11 +1667,21 @@ xfs_fs_fill_super(
 {
 	struct inode		*root;
 	struct xfs_mount	*mp = NULL;
-	struct xfs_mount_args	*args = xfs_args_allocate(sb, silent);
-	int			error;
+	struct xfs_mount_args	*args;
+	int			flags = 0, error = ENOMEM;
 
-	mp = xfs_mount_init();
+	args = xfs_args_allocate(sb, silent);
+	if (!args)
+		return -ENOMEM;
 
+	mp = kzalloc(sizeof(struct xfs_mount), GFP_KERNEL);
+	if (!mp)
+		goto out_free_args;
+
+	spin_lock_init(&mp->m_sb_lock);
+	mutex_init(&mp->m_ilock);
+	mutex_init(&mp->m_growlock);
+	atomic_set(&mp->m_active_trans, 0);
 	INIT_LIST_HEAD(&mp->m_sync_list);
 	spin_lock_init(&mp->m_sync_lock);
 	init_waitqueue_head(&mp->m_wait_single_sync_task);
@@ -1324,16 +1694,60 @@ xfs_fs_fill_super(
 
 	error = xfs_parseargs(mp, (char *)data, args, 0);
 	if (error)
-		goto fail_vfsop;
+		goto out_free_mp;
 
 	sb_min_blocksize(sb, BBSIZE);
+	sb->s_xattr = xfs_xattr_handlers;
 	sb->s_export_op = &xfs_export_operations;
 	sb->s_qcop = &xfs_quotactl_operations;
 	sb->s_op = &xfs_super_operations;
 
-	error = xfs_mount(mp, args, NULL);
+	error = xfs_dmops_get(mp, args);
+	if (error)
+		goto out_free_mp;
+	error = xfs_qmops_get(mp, args);
+	if (error)
+		goto out_put_dmops;
+
+	if (args->flags & XFSMNT_QUIET)
+		flags |= XFS_MFSI_QUIET;
+
+	error = xfs_open_devices(mp, args);
+	if (error)
+		goto out_put_qmops;
+
+	if (xfs_icsb_init_counters(mp))
+		mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB;
+
+	/*
+	 * Setup flags based on mount(2) options and then the superblock
+	 */
+	error = xfs_start_flags(args, mp);
+	if (error)
+		goto out_free_fsname;
+	error = xfs_readsb(mp, flags);
+	if (error)
+		goto out_free_fsname;
+	error = xfs_finish_flags(args, mp);
 	if (error)
-		goto fail_vfsop;
+		goto out_free_sb;
+
+	error = xfs_setup_devices(mp);
+	if (error)
+		goto out_free_sb;
+
+	if (mp->m_flags & XFS_MOUNT_BARRIER)
+		xfs_mountfs_check_barriers(mp);
+
+	error = xfs_filestream_mount(mp);
+	if (error)
+		goto out_free_sb;
+
+	error = xfs_mountfs(mp);
+	if (error)
+		goto out_filestream_unmount;
+
+	XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname);
 
 	sb->s_dirt = 1;
 	sb->s_magic = XFS_SB_MAGIC;
@@ -1343,7 +1757,7 @@ xfs_fs_fill_super(
 	sb->s_time_gran = 1;
 	set_posix_acl_flag(sb);
 
-	root = igrab(mp->m_rootip->i_vnode);
+	root = igrab(VFS_I(mp->m_rootip));
 	if (!root) {
 		error = ENOENT;
 		goto fail_unmount;
@@ -1368,10 +1782,28 @@ xfs_fs_fill_super(
 
 	xfs_itrace_exit(XFS_I(sb->s_root->d_inode));
 
-	kmem_free(args, sizeof(*args));
+	kfree(args);
 	return 0;
 
-fail_vnrele:
+ out_filestream_unmount:
+	xfs_filestream_unmount(mp);
+ out_free_sb:
+	xfs_freesb(mp);
+ out_free_fsname:
+	xfs_free_fsname(mp);
+	xfs_icsb_destroy_counters(mp);
+	xfs_close_devices(mp);
+ out_put_qmops:
+	xfs_qmops_put(mp);
+ out_put_dmops:
+	xfs_dmops_put(mp);
+ out_free_mp:
+	kfree(mp);
+ out_free_args:
+	kfree(args);
+	return -error;
+
+ fail_vnrele:
 	if (sb->s_root) {
 		dput(sb->s_root);
 		sb->s_root = NULL;
@@ -1379,12 +1811,20 @@ fail_vnrele:
 		iput(root);
 	}
 
-fail_unmount:
-	xfs_unmount(mp, 0, NULL);
+ fail_unmount:
+	/*
+	 * Blow away any referenced inode in the filestreams cache.
+	 * This can and will cause log traffic as inodes go inactive
+	 * here.
+	 */
+	xfs_filestream_unmount(mp);
 
-fail_vfsop:
-	kmem_free(args, sizeof(*args));
-	return -error;
+	XFS_bflush(mp->m_ddev_targp);
+	error = xfs_unmount_flush(mp, 0);
+	WARN_ON(error);
+
+	xfs_unmountfs(mp);
+	goto out_free_sb;
 }
 
 STATIC int
@@ -1429,9 +1869,235 @@ static struct file_system_type xfs_fs_type = {
 	.fs_flags		= FS_REQUIRES_DEV,
 };
 
+STATIC int __init
+xfs_alloc_trace_bufs(void)
+{
+#ifdef XFS_ALLOC_TRACE
+	xfs_alloc_trace_buf = ktrace_alloc(XFS_ALLOC_TRACE_SIZE, KM_MAYFAIL);
+	if (!xfs_alloc_trace_buf)
+		goto out;
+#endif
+#ifdef XFS_BMAP_TRACE
+	xfs_bmap_trace_buf = ktrace_alloc(XFS_BMAP_TRACE_SIZE, KM_MAYFAIL);
+	if (!xfs_bmap_trace_buf)
+		goto out_free_alloc_trace;
+#endif
+#ifdef XFS_BMBT_TRACE
+	xfs_bmbt_trace_buf = ktrace_alloc(XFS_BMBT_TRACE_SIZE, KM_MAYFAIL);
+	if (!xfs_bmbt_trace_buf)
+		goto out_free_bmap_trace;
+#endif
+#ifdef XFS_ATTR_TRACE
+	xfs_attr_trace_buf = ktrace_alloc(XFS_ATTR_TRACE_SIZE, KM_MAYFAIL);
+	if (!xfs_attr_trace_buf)
+		goto out_free_bmbt_trace;
+#endif
+#ifdef XFS_DIR2_TRACE
+	xfs_dir2_trace_buf = ktrace_alloc(XFS_DIR2_GTRACE_SIZE, KM_MAYFAIL);
+	if (!xfs_dir2_trace_buf)
+		goto out_free_attr_trace;
+#endif
+
+	return 0;
+
+#ifdef XFS_DIR2_TRACE
+ out_free_attr_trace:
+#endif
+#ifdef XFS_ATTR_TRACE
+	ktrace_free(xfs_attr_trace_buf);
+ out_free_bmbt_trace:
+#endif
+#ifdef XFS_BMBT_TRACE
+	ktrace_free(xfs_bmbt_trace_buf);
+ out_free_bmap_trace:
+#endif
+#ifdef XFS_BMAP_TRACE
+	ktrace_free(xfs_bmap_trace_buf);
+ out_free_alloc_trace:
+#endif
+#ifdef XFS_ALLOC_TRACE
+	ktrace_free(xfs_alloc_trace_buf);
+ out:
+#endif
+	return -ENOMEM;
+}
+
+STATIC void
+xfs_free_trace_bufs(void)
+{
+#ifdef XFS_DIR2_TRACE
+	ktrace_free(xfs_dir2_trace_buf);
+#endif
+#ifdef XFS_ATTR_TRACE
+	ktrace_free(xfs_attr_trace_buf);
+#endif
+#ifdef XFS_BMBT_TRACE
+	ktrace_free(xfs_bmbt_trace_buf);
+#endif
+#ifdef XFS_BMAP_TRACE
+	ktrace_free(xfs_bmap_trace_buf);
+#endif
+#ifdef XFS_ALLOC_TRACE
+	ktrace_free(xfs_alloc_trace_buf);
+#endif
+}
+
+STATIC int __init
+xfs_init_zones(void)
+{
+	xfs_vnode_zone = kmem_zone_init_flags(sizeof(struct inode), "xfs_vnode",
+					KM_ZONE_HWALIGN | KM_ZONE_RECLAIM |
+					KM_ZONE_SPREAD,
+					xfs_fs_inode_init_once);
+	if (!xfs_vnode_zone)
+		goto out;
+
+	xfs_ioend_zone = kmem_zone_init(sizeof(xfs_ioend_t), "xfs_ioend");
+	if (!xfs_ioend_zone)
+		goto out_destroy_vnode_zone;
+
+	xfs_ioend_pool = mempool_create_slab_pool(4 * MAX_BUF_PER_PAGE,
+						  xfs_ioend_zone);
+	if (!xfs_ioend_pool)
+		goto out_destroy_ioend_zone;
+
+	xfs_log_ticket_zone = kmem_zone_init(sizeof(xlog_ticket_t),
+						"xfs_log_ticket");
+	if (!xfs_log_ticket_zone)
+		goto out_destroy_ioend_pool;
+
+	xfs_bmap_free_item_zone = kmem_zone_init(sizeof(xfs_bmap_free_item_t),
+						"xfs_bmap_free_item");
+	if (!xfs_bmap_free_item_zone)
+		goto out_destroy_log_ticket_zone;
+	xfs_btree_cur_zone = kmem_zone_init(sizeof(xfs_btree_cur_t),
+						"xfs_btree_cur");
+	if (!xfs_btree_cur_zone)
+		goto out_destroy_bmap_free_item_zone;
+
+	xfs_da_state_zone = kmem_zone_init(sizeof(xfs_da_state_t),
+						"xfs_da_state");
+	if (!xfs_da_state_zone)
+		goto out_destroy_btree_cur_zone;
+
+	xfs_dabuf_zone = kmem_zone_init(sizeof(xfs_dabuf_t), "xfs_dabuf");
+	if (!xfs_dabuf_zone)
+		goto out_destroy_da_state_zone;
+
+	xfs_ifork_zone = kmem_zone_init(sizeof(xfs_ifork_t), "xfs_ifork");
+	if (!xfs_ifork_zone)
+		goto out_destroy_dabuf_zone;
+
+	xfs_trans_zone = kmem_zone_init(sizeof(xfs_trans_t), "xfs_trans");
+	if (!xfs_trans_zone)
+		goto out_destroy_ifork_zone;
+
+	/*
+	 * The size of the zone allocated buf log item is the maximum
+	 * size possible under XFS.  This wastes a little bit of memory,
+	 * but it is much faster.
+	 */
+	xfs_buf_item_zone = kmem_zone_init((sizeof(xfs_buf_log_item_t) +
+				(((XFS_MAX_BLOCKSIZE / XFS_BLI_CHUNK) /
+				  NBWORD) * sizeof(int))), "xfs_buf_item");
+	if (!xfs_buf_item_zone)
+		goto out_destroy_trans_zone;
+
+	xfs_efd_zone = kmem_zone_init((sizeof(xfs_efd_log_item_t) +
+			((XFS_EFD_MAX_FAST_EXTENTS - 1) *
+				 sizeof(xfs_extent_t))), "xfs_efd_item");
+	if (!xfs_efd_zone)
+		goto out_destroy_buf_item_zone;
+
+	xfs_efi_zone = kmem_zone_init((sizeof(xfs_efi_log_item_t) +
+			((XFS_EFI_MAX_FAST_EXTENTS - 1) *
+				sizeof(xfs_extent_t))), "xfs_efi_item");
+	if (!xfs_efi_zone)
+		goto out_destroy_efd_zone;
+
+	xfs_inode_zone =
+		kmem_zone_init_flags(sizeof(xfs_inode_t), "xfs_inode",
+					KM_ZONE_HWALIGN | KM_ZONE_RECLAIM |
+					KM_ZONE_SPREAD, NULL);
+	if (!xfs_inode_zone)
+		goto out_destroy_efi_zone;
+
+	xfs_ili_zone =
+		kmem_zone_init_flags(sizeof(xfs_inode_log_item_t), "xfs_ili",
+					KM_ZONE_SPREAD, NULL);
+	if (!xfs_ili_zone)
+		goto out_destroy_inode_zone;
+
+#ifdef CONFIG_XFS_POSIX_ACL
+	xfs_acl_zone = kmem_zone_init(sizeof(xfs_acl_t), "xfs_acl");
+	if (!xfs_acl_zone)
+		goto out_destroy_ili_zone;
+#endif
+
+	return 0;
+
+#ifdef CONFIG_XFS_POSIX_ACL
+ out_destroy_ili_zone:
+#endif
+	kmem_zone_destroy(xfs_ili_zone);
+ out_destroy_inode_zone:
+	kmem_zone_destroy(xfs_inode_zone);
+ out_destroy_efi_zone:
+	kmem_zone_destroy(xfs_efi_zone);
+ out_destroy_efd_zone:
+	kmem_zone_destroy(xfs_efd_zone);
+ out_destroy_buf_item_zone:
+	kmem_zone_destroy(xfs_buf_item_zone);
+ out_destroy_trans_zone:
+	kmem_zone_destroy(xfs_trans_zone);
+ out_destroy_ifork_zone:
+	kmem_zone_destroy(xfs_ifork_zone);
+ out_destroy_dabuf_zone:
+	kmem_zone_destroy(xfs_dabuf_zone);
+ out_destroy_da_state_zone:
+	kmem_zone_destroy(xfs_da_state_zone);
+ out_destroy_btree_cur_zone:
+	kmem_zone_destroy(xfs_btree_cur_zone);
+ out_destroy_bmap_free_item_zone:
+	kmem_zone_destroy(xfs_bmap_free_item_zone);
+ out_destroy_log_ticket_zone:
+	kmem_zone_destroy(xfs_log_ticket_zone);
+ out_destroy_ioend_pool:
+	mempool_destroy(xfs_ioend_pool);
+ out_destroy_ioend_zone:
+	kmem_zone_destroy(xfs_ioend_zone);
+ out_destroy_vnode_zone:
+	kmem_zone_destroy(xfs_vnode_zone);
+ out:
+	return -ENOMEM;
+}
+
+STATIC void
+xfs_destroy_zones(void)
+{
+#ifdef CONFIG_XFS_POSIX_ACL
+	kmem_zone_destroy(xfs_acl_zone);
+#endif
+	kmem_zone_destroy(xfs_ili_zone);
+	kmem_zone_destroy(xfs_inode_zone);
+	kmem_zone_destroy(xfs_efi_zone);
+	kmem_zone_destroy(xfs_efd_zone);
+	kmem_zone_destroy(xfs_buf_item_zone);
+	kmem_zone_destroy(xfs_trans_zone);
+	kmem_zone_destroy(xfs_ifork_zone);
+	kmem_zone_destroy(xfs_dabuf_zone);
+	kmem_zone_destroy(xfs_da_state_zone);
+	kmem_zone_destroy(xfs_btree_cur_zone);
+	kmem_zone_destroy(xfs_bmap_free_item_zone);
+	kmem_zone_destroy(xfs_log_ticket_zone);
+	mempool_destroy(xfs_ioend_pool);
+	kmem_zone_destroy(xfs_ioend_zone);
+	kmem_zone_destroy(xfs_vnode_zone);
+
+}
 
 STATIC int __init
-init_xfs_fs( void )
+init_xfs_fs(void)
 {
 	int			error;
 	static char		message[] __initdata = KERN_INFO \
@@ -1440,42 +2106,73 @@ init_xfs_fs( void )
 	printk(message);
 
 	ktrace_init(64);
+	vn_init();
+	xfs_dir_startup();
 
 	error = xfs_init_zones();
-	if (error < 0)
-		goto undo_zones;
+	if (error)
+		goto out;
+
+	error = xfs_alloc_trace_bufs();
+	if (error)
+		goto out_destroy_zones;
+
+	error = xfs_mru_cache_init();
+	if (error)
+		goto out_free_trace_buffers;
+
+	error = xfs_filestream_init();
+	if (error)
+		goto out_mru_cache_uninit;
 
 	error = xfs_buf_init();
-	if (error < 0)
-		goto undo_buffers;
+	if (error)
+		goto out_filestream_uninit;
+
+	error = xfs_init_procfs();
+	if (error)
+		goto out_buf_terminate;
+
+	error = xfs_sysctl_register();
+	if (error)
+		goto out_cleanup_procfs;
 
-	vn_init();
-	xfs_init();
-	uuid_init();
 	vfs_initquota();
 
 	error = register_filesystem(&xfs_fs_type);
 	if (error)
-		goto undo_register;
+		goto out_sysctl_unregister;
 	return 0;
 
-undo_register:
+ out_sysctl_unregister:
+	xfs_sysctl_unregister();
+ out_cleanup_procfs:
+	xfs_cleanup_procfs();
+ out_buf_terminate:
 	xfs_buf_terminate();
-
-undo_buffers:
+ out_filestream_uninit:
+	xfs_filestream_uninit();
+ out_mru_cache_uninit:
+	xfs_mru_cache_uninit();
+ out_free_trace_buffers:
+	xfs_free_trace_bufs();
+ out_destroy_zones:
 	xfs_destroy_zones();
-
-undo_zones:
+ out:
 	return error;
 }
 
 STATIC void __exit
-exit_xfs_fs( void )
+exit_xfs_fs(void)
 {
 	vfs_exitquota();
 	unregister_filesystem(&xfs_fs_type);
-	xfs_cleanup();
+	xfs_sysctl_unregister();
+	xfs_cleanup_procfs();
 	xfs_buf_terminate();
+	xfs_filestream_uninit();
+	xfs_mru_cache_uninit();
+	xfs_free_trace_bufs();
 	xfs_destroy_zones();
 	ktrace_uninit();
 }
diff --git a/fs/xfs/linux-2.6/xfs_super.h b/fs/xfs/linux-2.6/xfs_super.h
index 3efb7c6d330..fe2ef4e6a0f 100644
--- a/fs/xfs/linux-2.6/xfs_super.h
+++ b/fs/xfs/linux-2.6/xfs_super.h
@@ -101,18 +101,13 @@ struct block_device;
 
 extern __uint64_t xfs_max_file_offset(unsigned int);
 
-extern void xfs_initialize_vnode(struct xfs_mount *mp, bhv_vnode_t *vp,
-		struct xfs_inode *ip);
-
 extern void xfs_flush_inode(struct xfs_inode *);
 extern void xfs_flush_device(struct xfs_inode *);
 
-extern int  xfs_blkdev_get(struct xfs_mount *, const char *,
-				struct block_device **);
-extern void xfs_blkdev_put(struct block_device *);
 extern void xfs_blkdev_issue_flush(struct xfs_buftarg *);
 
 extern const struct export_operations xfs_export_operations;
+extern struct xattr_handler *xfs_xattr_handlers[];
 
 #define XFS_M(sb)		((struct xfs_mount *)((sb)->s_fs_info))
 
diff --git a/fs/xfs/linux-2.6/xfs_sysctl.c b/fs/xfs/linux-2.6/xfs_sysctl.c
index bb997d75c05..7dacb5bbde3 100644
--- a/fs/xfs/linux-2.6/xfs_sysctl.c
+++ b/fs/xfs/linux-2.6/xfs_sysctl.c
@@ -259,15 +259,17 @@ static ctl_table xfs_root_table[] = {
 	{}
 };
 
-void
+int
 xfs_sysctl_register(void)
 {
 	xfs_table_header = register_sysctl_table(xfs_root_table);
+	if (!xfs_table_header)
+		return -ENOMEM;
+	return 0;
 }
 
 void
 xfs_sysctl_unregister(void)
 {
-	if (xfs_table_header)
-		unregister_sysctl_table(xfs_table_header);
+	unregister_sysctl_table(xfs_table_header);
 }
diff --git a/fs/xfs/linux-2.6/xfs_sysctl.h b/fs/xfs/linux-2.6/xfs_sysctl.h
index 98b97e399d6..4aadb8056c3 100644
--- a/fs/xfs/linux-2.6/xfs_sysctl.h
+++ b/fs/xfs/linux-2.6/xfs_sysctl.h
@@ -93,10 +93,10 @@ enum {
 extern xfs_param_t	xfs_params;
 
 #ifdef CONFIG_SYSCTL
-extern void xfs_sysctl_register(void);
+extern int xfs_sysctl_register(void);
 extern void xfs_sysctl_unregister(void);
 #else
-# define xfs_sysctl_register()		do { } while (0)
+# define xfs_sysctl_register()		(0)
 # define xfs_sysctl_unregister()	do { } while (0)
 #endif /* CONFIG_SYSCTL */
 
diff --git a/fs/xfs/linux-2.6/xfs_vnode.c b/fs/xfs/linux-2.6/xfs_vnode.c
index bc7afe00733..b52528bbbff 100644
--- a/fs/xfs/linux-2.6/xfs_vnode.c
+++ b/fs/xfs/linux-2.6/xfs_vnode.c
@@ -33,7 +33,7 @@
 
 
 /*
- * Dedicated vnode inactive/reclaim sync semaphores.
+ * Dedicated vnode inactive/reclaim sync wait queues.
  * Prime number of hash buckets since address is used as the key.
  */
 #define NVSYNC                  37
@@ -82,74 +82,6 @@ vn_ioerror(
 		xfs_do_force_shutdown(ip->i_mount, SHUTDOWN_DEVICE_REQ, f, l);
 }
 
-/*
- * Revalidate the Linux inode from the XFS inode.
- * Note: i_size _not_ updated; we must hold the inode
- * semaphore when doing that - callers responsibility.
- */
-int
-vn_revalidate(
-	bhv_vnode_t		*vp)
-{
-	struct inode		*inode = vn_to_inode(vp);
-	struct xfs_inode	*ip = XFS_I(inode);
-	struct xfs_mount	*mp = ip->i_mount;
-	unsigned long		xflags;
-
-	xfs_itrace_entry(ip);
-
-	if (XFS_FORCED_SHUTDOWN(mp))
-		return -EIO;
-
-	xfs_ilock(ip, XFS_ILOCK_SHARED);
-	inode->i_mode	    = ip->i_d.di_mode;
-	inode->i_uid	    = ip->i_d.di_uid;
-	inode->i_gid	    = ip->i_d.di_gid;
-	inode->i_mtime.tv_sec = ip->i_d.di_mtime.t_sec;
-	inode->i_mtime.tv_nsec = ip->i_d.di_mtime.t_nsec;
-	inode->i_ctime.tv_sec = ip->i_d.di_ctime.t_sec;
-	inode->i_ctime.tv_nsec = ip->i_d.di_ctime.t_nsec;
-
-	xflags = xfs_ip2xflags(ip);
-	if (xflags & XFS_XFLAG_IMMUTABLE)
-		inode->i_flags |= S_IMMUTABLE;
-	else
-		inode->i_flags &= ~S_IMMUTABLE;
-	if (xflags & XFS_XFLAG_APPEND)
-		inode->i_flags |= S_APPEND;
-	else
-		inode->i_flags &= ~S_APPEND;
-	if (xflags & XFS_XFLAG_SYNC)
-		inode->i_flags |= S_SYNC;
-	else
-		inode->i_flags &= ~S_SYNC;
-	if (xflags & XFS_XFLAG_NOATIME)
-		inode->i_flags |= S_NOATIME;
-	else
-		inode->i_flags &= ~S_NOATIME;
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-	xfs_iflags_clear(ip, XFS_IMODIFIED);
-	return 0;
-}
-
-/*
- * Add a reference to a referenced vnode.
- */
-bhv_vnode_t *
-vn_hold(
-	bhv_vnode_t	*vp)
-{
-	struct inode	*inode;
-
-	XFS_STATS_INC(vn_hold);
-
-	inode = igrab(vn_to_inode(vp));
-	ASSERT(inode);
-
-	return vp;
-}
-
 #ifdef	XFS_INODE_TRACE
 
 /*
@@ -158,7 +90,7 @@ vn_hold(
  */
 static inline int xfs_icount(struct xfs_inode *ip)
 {
-	bhv_vnode_t *vp = XFS_ITOV_NULL(ip);
+	struct inode *vp = VFS_I(ip);
 
 	if (vp)
 		return vn_count(vp);
diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h
index 25eb2a9e8d9..683ce16210f 100644
--- a/fs/xfs/linux-2.6/xfs_vnode.h
+++ b/fs/xfs/linux-2.6/xfs_vnode.h
@@ -19,24 +19,9 @@
 #define __XFS_VNODE_H__
 
 struct file;
-struct bhv_vattr;
 struct xfs_iomap;
 struct attrlist_cursor_kern;
 
-typedef struct inode	bhv_vnode_t;
-
-/*
- * Vnode to Linux inode mapping.
- */
-static inline bhv_vnode_t *vn_from_inode(struct inode *inode)
-{
-	return inode;
-}
-static inline struct inode *vn_to_inode(bhv_vnode_t *vnode)
-{
-	return vnode;
-}
-
 /*
  * Return values for xfs_inactive.  A return value of
  * VN_INACTIVE_NOCACHE implies that the file system behavior
@@ -66,87 +51,8 @@ static inline struct inode *vn_to_inode(bhv_vnode_t *vnode)
 					   Prevent VM access to the pages until
 					   the operation completes. */
 
-/*
- * Vnode attributes.  va_mask indicates those attributes the caller
- * wants to set or extract.
- */
-typedef struct bhv_vattr {
-	int		va_mask;	/* bit-mask of attributes present */
-	mode_t		va_mode;	/* file access mode and type */
-	xfs_nlink_t	va_nlink;	/* number of references to file */
-	uid_t		va_uid;		/* owner user id */
-	gid_t		va_gid;		/* owner group id */
-	xfs_ino_t	va_nodeid;	/* file id */
-	xfs_off_t	va_size;	/* file size in bytes */
-	u_long		va_blocksize;	/* blocksize preferred for i/o */
-	struct timespec	va_atime;	/* time of last access */
-	struct timespec	va_mtime;	/* time of last modification */
-	struct timespec	va_ctime;	/* time file changed */
-	u_int		va_gen;		/* generation number of file */
-	xfs_dev_t	va_rdev;	/* device the special file represents */
-	__int64_t	va_nblocks;	/* number of blocks allocated */
-	u_long		va_xflags;	/* random extended file flags */
-	u_long		va_extsize;	/* file extent size */
-	u_long		va_nextents;	/* number of extents in file */
-	u_long		va_anextents;	/* number of attr extents in file */
-	prid_t		va_projid;	/* project id */
-} bhv_vattr_t;
-
-/*
- * setattr or getattr attributes
- */
-#define XFS_AT_TYPE		0x00000001
-#define XFS_AT_MODE		0x00000002
-#define XFS_AT_UID		0x00000004
-#define XFS_AT_GID		0x00000008
-#define XFS_AT_FSID		0x00000010
-#define XFS_AT_NODEID		0x00000020
-#define XFS_AT_NLINK		0x00000040
-#define XFS_AT_SIZE		0x00000080
-#define XFS_AT_ATIME		0x00000100
-#define XFS_AT_MTIME		0x00000200
-#define XFS_AT_CTIME		0x00000400
-#define XFS_AT_RDEV		0x00000800
-#define XFS_AT_BLKSIZE		0x00001000
-#define XFS_AT_NBLOCKS		0x00002000
-#define XFS_AT_VCODE		0x00004000
-#define XFS_AT_MAC		0x00008000
-#define XFS_AT_UPDATIME		0x00010000
-#define XFS_AT_UPDMTIME		0x00020000
-#define XFS_AT_UPDCTIME		0x00040000
-#define XFS_AT_ACL		0x00080000
-#define XFS_AT_CAP		0x00100000
-#define XFS_AT_INF		0x00200000
-#define XFS_AT_XFLAGS		0x00400000
-#define XFS_AT_EXTSIZE		0x00800000
-#define XFS_AT_NEXTENTS		0x01000000
-#define XFS_AT_ANEXTENTS	0x02000000
-#define XFS_AT_PROJID		0x04000000
-#define XFS_AT_SIZE_NOPERM	0x08000000
-#define XFS_AT_GENCOUNT		0x10000000
-
-#define XFS_AT_ALL	(XFS_AT_TYPE|XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID|\
-		XFS_AT_FSID|XFS_AT_NODEID|XFS_AT_NLINK|XFS_AT_SIZE|\
-		XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME|XFS_AT_RDEV|\
-		XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_VCODE|XFS_AT_MAC|\
-		XFS_AT_ACL|XFS_AT_CAP|XFS_AT_INF|XFS_AT_XFLAGS|XFS_AT_EXTSIZE|\
-		XFS_AT_NEXTENTS|XFS_AT_ANEXTENTS|XFS_AT_PROJID|XFS_AT_GENCOUNT)
-
-#define XFS_AT_STAT	(XFS_AT_TYPE|XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID|\
-		XFS_AT_FSID|XFS_AT_NODEID|XFS_AT_NLINK|XFS_AT_SIZE|\
-		XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME|XFS_AT_RDEV|\
-		XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_PROJID)
-
-#define XFS_AT_TIMES	(XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME)
-
-#define XFS_AT_UPDTIMES	(XFS_AT_UPDATIME|XFS_AT_UPDMTIME|XFS_AT_UPDCTIME)
-
-#define XFS_AT_NOSET	(XFS_AT_NLINK|XFS_AT_RDEV|XFS_AT_FSID|XFS_AT_NODEID|\
-		XFS_AT_TYPE|XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_VCODE|\
-		XFS_AT_NEXTENTS|XFS_AT_ANEXTENTS|XFS_AT_GENCOUNT)
 
 extern void	vn_init(void);
-extern int	vn_revalidate(bhv_vnode_t *);
 
 /*
  * Yeah, these don't take vnode anymore at all, all this should be
@@ -156,57 +62,52 @@ extern void	vn_iowait(struct xfs_inode *ip);
 extern void	vn_iowake(struct xfs_inode *ip);
 extern void	vn_ioerror(struct xfs_inode *ip, int error, char *f, int l);
 
-static inline int vn_count(bhv_vnode_t *vp)
+static inline int vn_count(struct inode *vp)
 {
-	return atomic_read(&vn_to_inode(vp)->i_count);
+	return atomic_read(&vp->i_count);
 }
 
-/*
- * Vnode reference counting functions (and macros for compatibility).
- */
-extern bhv_vnode_t	*vn_hold(bhv_vnode_t *);
+#define IHOLD(ip) \
+do { \
+	ASSERT(atomic_read(&VFS_I(ip)->i_count) > 0) ; \
+	atomic_inc(&(VFS_I(ip)->i_count)); \
+	xfs_itrace_hold((ip), __FILE__, __LINE__, (inst_t *)__return_address); \
+} while (0)
 
-#if defined(XFS_INODE_TRACE)
-#define VN_HOLD(vp)		\
-	((void)vn_hold(vp),	\
-	  xfs_itrace_hold(xfs_vtoi(vp), __FILE__, __LINE__, (inst_t *)__return_address))
-#define VN_RELE(vp)		\
-	  (xfs_itrace_rele(xfs_vtoi(vp), __FILE__, __LINE__, (inst_t *)__return_address), \
-	   iput(vn_to_inode(vp)))
-#else
-#define VN_HOLD(vp)		((void)vn_hold(vp))
-#define VN_RELE(vp)		(iput(vn_to_inode(vp)))
-#endif
+#define IRELE(ip) \
+do { \
+	xfs_itrace_rele((ip), __FILE__, __LINE__, (inst_t *)__return_address); \
+	iput(VFS_I(ip)); \
+} while (0)
 
-static inline bhv_vnode_t *vn_grab(bhv_vnode_t *vp)
+static inline struct inode *vn_grab(struct inode *vp)
 {
-	struct inode *inode = igrab(vn_to_inode(vp));
-	return inode ? vn_from_inode(inode) : NULL;
+	return igrab(vp);
 }
 
 /*
  * Dealing with bad inodes
  */
-static inline int VN_BAD(bhv_vnode_t *vp)
+static inline int VN_BAD(struct inode *vp)
 {
-	return is_bad_inode(vn_to_inode(vp));
+	return is_bad_inode(vp);
 }
 
 /*
  * Extracting atime values in various formats
  */
-static inline void vn_atime_to_bstime(bhv_vnode_t *vp, xfs_bstime_t *bs_atime)
+static inline void vn_atime_to_bstime(struct inode *vp, xfs_bstime_t *bs_atime)
 {
 	bs_atime->tv_sec = vp->i_atime.tv_sec;
 	bs_atime->tv_nsec = vp->i_atime.tv_nsec;
 }
 
-static inline void vn_atime_to_timespec(bhv_vnode_t *vp, struct timespec *ts)
+static inline void vn_atime_to_timespec(struct inode *vp, struct timespec *ts)
 {
 	*ts = vp->i_atime;
 }
 
-static inline void vn_atime_to_time_t(bhv_vnode_t *vp, time_t *tt)
+static inline void vn_atime_to_time_t(struct inode *vp, time_t *tt)
 {
 	*tt = vp->i_atime.tv_sec;
 }
@@ -214,20 +115,11 @@ static inline void vn_atime_to_time_t(bhv_vnode_t *vp, time_t *tt)
 /*
  * Some useful predicates.
  */
-#define VN_MAPPED(vp)	mapping_mapped(vn_to_inode(vp)->i_mapping)
-#define VN_CACHED(vp)	(vn_to_inode(vp)->i_mapping->nrpages)
-#define VN_DIRTY(vp)	mapping_tagged(vn_to_inode(vp)->i_mapping, \
+#define VN_MAPPED(vp)	mapping_mapped(vp->i_mapping)
+#define VN_CACHED(vp)	(vp->i_mapping->nrpages)
+#define VN_DIRTY(vp)	mapping_tagged(vp->i_mapping, \
 					PAGECACHE_TAG_DIRTY)
 
-/*
- * Flags to vop_setattr/getattr.
- */
-#define	ATTR_UTIME	0x01	/* non-default utime(2) request */
-#define	ATTR_DMI	0x08	/* invocation from a DMI function */
-#define	ATTR_LAZY	0x80	/* set/get attributes lazily */
-#define	ATTR_NONBLOCK	0x100	/* return EAGAIN if operation would block */
-#define ATTR_NOLOCK	0x200	/* Don't grab any conflicting locks */
-#define ATTR_NOSIZETOK	0x400	/* Don't get the SIZE token */
 
 /*
  * Tracking vnode activity.
diff --git a/fs/xfs/linux-2.6/xfs_xattr.c b/fs/xfs/linux-2.6/xfs_xattr.c
new file mode 100644
index 00000000000..964621fde6e
--- /dev/null
+++ b/fs/xfs/linux-2.6/xfs_xattr.c
@@ -0,0 +1,330 @@
+/*
+ * Copyright (C) 2008 Christoph Hellwig.
+ * Portions Copyright (C) 2000-2008 Silicon Graphics, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write the Free Software Foundation,
+ * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include "xfs.h"
+#include "xfs_da_btree.h"
+#include "xfs_bmap_btree.h"
+#include "xfs_inode.h"
+#include "xfs_attr.h"
+#include "xfs_attr_leaf.h"
+#include "xfs_acl.h"
+#include "xfs_vnodeops.h"
+
+#include <linux/posix_acl_xattr.h>
+#include <linux/xattr.h>
+
+
+/*
+ * ACL handling.  Should eventually be moved into xfs_acl.c
+ */
+
+static int
+xfs_decode_acl(const char *name)
+{
+	if (strcmp(name, "posix_acl_access") == 0)
+		return _ACL_TYPE_ACCESS;
+	else if (strcmp(name, "posix_acl_default") == 0)
+		return _ACL_TYPE_DEFAULT;
+	return -EINVAL;
+}
+
+/*
+ * Get system extended attributes which at the moment only
+ * includes Posix ACLs.
+ */
+static int
+xfs_xattr_system_get(struct inode *inode, const char *name,
+		void *buffer, size_t size)
+{
+	int acl;
+
+	acl = xfs_decode_acl(name);
+	if (acl < 0)
+		return acl;
+
+	return xfs_acl_vget(inode, buffer, size, acl);
+}
+
+static int
+xfs_xattr_system_set(struct inode *inode, const char *name,
+		const void *value, size_t size, int flags)
+{
+	int acl;
+
+	acl = xfs_decode_acl(name);
+	if (acl < 0)
+		return acl;
+	if (flags & XATTR_CREATE)
+		return -EINVAL;
+
+	if (!value)
+		return xfs_acl_vremove(inode, acl);
+
+	return xfs_acl_vset(inode, (void *)value, size, acl);
+}
+
+static struct xattr_handler xfs_xattr_system_handler = {
+	.prefix	= XATTR_SYSTEM_PREFIX,
+	.get	= xfs_xattr_system_get,
+	.set	= xfs_xattr_system_set,
+};
+
+
+/*
+ * Real xattr handling.  The only difference between the namespaces is
+ * a flag passed to the low-level attr code.
+ */
+
+static int
+__xfs_xattr_get(struct inode *inode, const char *name,
+		void *value, size_t size, int xflags)
+{
+	struct xfs_inode *ip = XFS_I(inode);
+	int error, asize = size;
+
+	if (strcmp(name, "") == 0)
+		return -EINVAL;
+
+	/* Convert Linux syscall to XFS internal ATTR flags */
+	if (!size) {
+		xflags |= ATTR_KERNOVAL;
+		value = NULL;
+	}
+
+	error = -xfs_attr_get(ip, name, value, &asize, xflags);
+	if (error)
+		return error;
+	return asize;
+}
+
+static int
+__xfs_xattr_set(struct inode *inode, const char *name, const void *value,
+		size_t size, int flags, int xflags)
+{
+	struct xfs_inode *ip = XFS_I(inode);
+
+	if (strcmp(name, "") == 0)
+		return -EINVAL;
+
+	/* Convert Linux syscall to XFS internal ATTR flags */
+	if (flags & XATTR_CREATE)
+		xflags |= ATTR_CREATE;
+	if (flags & XATTR_REPLACE)
+		xflags |= ATTR_REPLACE;
+
+	if (!value)
+		return -xfs_attr_remove(ip, name, xflags);
+	return -xfs_attr_set(ip, name, (void *)value, size, xflags);
+}
+
+static int
+xfs_xattr_user_get(struct inode *inode, const char *name,
+		void *value, size_t size)
+{
+	return __xfs_xattr_get(inode, name, value, size, 0);
+}
+
+static int
+xfs_xattr_user_set(struct inode *inode, const char *name,
+		const void *value, size_t size, int flags)
+{
+	return __xfs_xattr_set(inode, name, value, size, flags, 0);
+}
+
+static struct xattr_handler xfs_xattr_user_handler = {
+	.prefix	= XATTR_USER_PREFIX,
+	.get	= xfs_xattr_user_get,
+	.set	= xfs_xattr_user_set,
+};
+
+
+static int
+xfs_xattr_trusted_get(struct inode *inode, const char *name,
+		void *value, size_t size)
+{
+	return __xfs_xattr_get(inode, name, value, size, ATTR_ROOT);
+}
+
+static int
+xfs_xattr_trusted_set(struct inode *inode, const char *name,
+		const void *value, size_t size, int flags)
+{
+	return __xfs_xattr_set(inode, name, value, size, flags, ATTR_ROOT);
+}
+
+static struct xattr_handler xfs_xattr_trusted_handler = {
+	.prefix	= XATTR_TRUSTED_PREFIX,
+	.get	= xfs_xattr_trusted_get,
+	.set	= xfs_xattr_trusted_set,
+};
+
+
+static int
+xfs_xattr_secure_get(struct inode *inode, const char *name,
+		void *value, size_t size)
+{
+	return __xfs_xattr_get(inode, name, value, size, ATTR_SECURE);
+}
+
+static int
+xfs_xattr_secure_set(struct inode *inode, const char *name,
+		const void *value, size_t size, int flags)
+{
+	return __xfs_xattr_set(inode, name, value, size, flags, ATTR_SECURE);
+}
+
+static struct xattr_handler xfs_xattr_security_handler = {
+	.prefix	= XATTR_SECURITY_PREFIX,
+	.get	= xfs_xattr_secure_get,
+	.set	= xfs_xattr_secure_set,
+};
+
+
+struct xattr_handler *xfs_xattr_handlers[] = {
+	&xfs_xattr_user_handler,
+	&xfs_xattr_trusted_handler,
+	&xfs_xattr_security_handler,
+	&xfs_xattr_system_handler,
+	NULL
+};
+
+static unsigned int xfs_xattr_prefix_len(int flags)
+{
+	if (flags & XFS_ATTR_SECURE)
+		return sizeof("security");
+	else if (flags & XFS_ATTR_ROOT)
+		return sizeof("trusted");
+	else
+		return sizeof("user");
+}
+
+static const char *xfs_xattr_prefix(int flags)
+{
+	if (flags & XFS_ATTR_SECURE)
+		return xfs_xattr_security_handler.prefix;
+	else if (flags & XFS_ATTR_ROOT)
+		return xfs_xattr_trusted_handler.prefix;
+	else
+		return xfs_xattr_user_handler.prefix;
+}
+
+static int
+xfs_xattr_put_listent(struct xfs_attr_list_context *context, int flags,
+		char *name, int namelen, int valuelen, char *value)
+{
+	unsigned int prefix_len = xfs_xattr_prefix_len(flags);
+	char *offset;
+	int arraytop;
+
+	ASSERT(context->count >= 0);
+
+	/*
+	 * Only show root namespace entries if we are actually allowed to
+	 * see them.
+	 */
+	if ((flags & XFS_ATTR_ROOT) && !capable(CAP_SYS_ADMIN))
+		return 0;
+
+	arraytop = context->count + prefix_len + namelen + 1;
+	if (arraytop > context->firstu) {
+		context->count = -1;	/* insufficient space */
+		return 1;
+	}
+	offset = (char *)context->alist + context->count;
+	strncpy(offset, xfs_xattr_prefix(flags), prefix_len);
+	offset += prefix_len;
+	strncpy(offset, name, namelen);			/* real name */
+	offset += namelen;
+	*offset = '\0';
+	context->count += prefix_len + namelen + 1;
+	return 0;
+}
+
+static int
+xfs_xattr_put_listent_sizes(struct xfs_attr_list_context *context, int flags,
+		char *name, int namelen, int valuelen, char *value)
+{
+	context->count += xfs_xattr_prefix_len(flags) + namelen + 1;
+	return 0;
+}
+
+static int
+list_one_attr(const char *name, const size_t len, void *data,
+		size_t size, ssize_t *result)
+{
+	char *p = data + *result;
+
+	*result += len;
+	if (!size)
+		return 0;
+	if (*result > size)
+		return -ERANGE;
+
+	strcpy(p, name);
+	return 0;
+}
+
+ssize_t
+xfs_vn_listxattr(struct dentry *dentry, char *data, size_t size)
+{
+	struct xfs_attr_list_context context;
+	struct attrlist_cursor_kern cursor = { 0 };
+	struct inode		*inode = dentry->d_inode;
+	int			error;
+
+	/*
+	 * First read the regular on-disk attributes.
+	 */
+	memset(&context, 0, sizeof(context));
+	context.dp = XFS_I(inode);
+	context.cursor = &cursor;
+	context.resynch = 1;
+	context.alist = data;
+	context.bufsize = size;
+	context.firstu = context.bufsize;
+
+	if (size)
+		context.put_listent = xfs_xattr_put_listent;
+	else
+		context.put_listent = xfs_xattr_put_listent_sizes;
+
+	xfs_attr_list_int(&context);
+	if (context.count < 0)
+		return -ERANGE;
+
+	/*
+	 * Then add the two synthetic ACL attributes.
+	 */
+	if (xfs_acl_vhasacl_access(inode)) {
+		error = list_one_attr(POSIX_ACL_XATTR_ACCESS,
+				strlen(POSIX_ACL_XATTR_ACCESS) + 1,
+				data, size, &context.count);
+		if (error)
+			return error;
+	}
+
+	if (xfs_acl_vhasacl_default(inode)) {
+		error = list_one_attr(POSIX_ACL_XATTR_DEFAULT,
+				strlen(POSIX_ACL_XATTR_DEFAULT) + 1,
+				data, size, &context.count);
+		if (error)
+			return error;
+	}
+
+	return context.count;
+}
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index 85df3288efd..f2705f2fd43 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -101,11 +101,18 @@ xfs_qm_dqinit(
 	if (brandnewdquot) {
 		dqp->dq_flnext = dqp->dq_flprev = dqp;
 		mutex_init(&dqp->q_qlock);
-		initnsema(&dqp->q_flock, 1, "fdq");
 		sv_init(&dqp->q_pinwait, SV_DEFAULT, "pdq");
 
+		/*
+		 * Because we want to use a counting completion, complete
+		 * the flush completion once to allow a single access to
+		 * the flush completion without blocking.
+		 */
+		init_completion(&dqp->q_flush);
+		complete(&dqp->q_flush);
+
 #ifdef XFS_DQUOT_TRACE
-		dqp->q_trace = ktrace_alloc(DQUOT_TRACE_SIZE, KM_SLEEP);
+		dqp->q_trace = ktrace_alloc(DQUOT_TRACE_SIZE, KM_NOFS);
 		xfs_dqtrace_entry(dqp, "DQINIT");
 #endif
 	} else {
@@ -150,7 +157,6 @@ xfs_qm_dqdestroy(
 	ASSERT(! XFS_DQ_IS_ON_FREELIST(dqp));
 
 	mutex_destroy(&dqp->q_qlock);
-	freesema(&dqp->q_flock);
 	sv_destroy(&dqp->q_pinwait);
 
 #ifdef XFS_DQUOT_TRACE
@@ -431,7 +437,7 @@ xfs_qm_dqalloc(
 	 * when it unlocks the inode. Since we want to keep the quota
 	 * inode around, we bump the vnode ref count now.
 	 */
-	VN_HOLD(XFS_ITOV(quotip));
+	IHOLD(quotip);
 
 	xfs_trans_ijoin(tp, quotip, XFS_ILOCK_EXCL);
 	nmaps = 1;
@@ -1211,7 +1217,7 @@ xfs_qm_dqflush(
 	int			error;
 
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
-	ASSERT(XFS_DQ_IS_FLUSH_LOCKED(dqp));
+	ASSERT(!completion_done(&dqp->q_flush));
 	xfs_dqtrace_entry(dqp, "DQFLUSH");
 
 	/*
@@ -1348,34 +1354,18 @@ xfs_qm_dqflush_done(
 	xfs_dqfunlock(dqp);
 }
 
-
-int
-xfs_qm_dqflock_nowait(
-	xfs_dquot_t *dqp)
-{
-	int locked;
-
-	locked = cpsema(&((dqp)->q_flock));
-
-	/* XXX ifdef these out */
-	if (locked)
-		(dqp)->dq_flags |= XFS_DQ_FLOCKED;
-	return (locked);
-}
-
-
 int
 xfs_qm_dqlock_nowait(
 	xfs_dquot_t *dqp)
 {
-	return (mutex_trylock(&((dqp)->q_qlock)));
+	return mutex_trylock(&dqp->q_qlock);
 }
 
 void
 xfs_dqlock(
 	xfs_dquot_t *dqp)
 {
-	mutex_lock(&(dqp->q_qlock));
+	mutex_lock(&dqp->q_qlock);
 }
 
 void
@@ -1435,8 +1425,7 @@ xfs_dqlock2(
 /* ARGSUSED */
 int
 xfs_qm_dqpurge(
-	xfs_dquot_t	*dqp,
-	uint		flags)
+	xfs_dquot_t	*dqp)
 {
 	xfs_dqhash_t	*thishash;
 	xfs_mount_t	*mp = dqp->q_mount;
@@ -1469,7 +1458,7 @@ xfs_qm_dqpurge(
 	 * if we're turning off quotas. Basically, we need this flush
 	 * lock, and are willing to block on it.
 	 */
-	if (! xfs_qm_dqflock_nowait(dqp)) {
+	if (!xfs_dqflock_nowait(dqp)) {
 		/*
 		 * Block on the flush lock after nudging dquot buffer,
 		 * if it is incore.
diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h
index 5c371a92e3e..8958d0faf8d 100644
--- a/fs/xfs/quota/xfs_dquot.h
+++ b/fs/xfs/quota/xfs_dquot.h
@@ -82,7 +82,7 @@ typedef struct xfs_dquot {
 	xfs_qcnt_t	 q_res_icount;	/* total inos allocd+reserved */
 	xfs_qcnt_t	 q_res_rtbcount;/* total realtime blks used+reserved */
 	mutex_t		 q_qlock;	/* quota lock */
-	sema_t		 q_flock;	/* flush lock */
+	struct completion q_flush;	/* flush completion queue */
 	uint		 q_pincount;	/* pin count for this dquot */
 	sv_t		 q_pinwait;	/* sync var for pinning */
 #ifdef XFS_DQUOT_TRACE
@@ -113,17 +113,25 @@ XFS_DQ_IS_LOCKED(xfs_dquot_t *dqp)
 
 
 /*
- * The following three routines simply manage the q_flock
- * semaphore embedded in the dquot.  This semaphore synchronizes
- * processes attempting to flush the in-core dquot back to disk.
+ * Manage the q_flush completion queue embedded in the dquot.  This completion
+ * queue synchronizes processes attempting to flush the in-core dquot back to
+ * disk.
  */
-#define xfs_dqflock(dqp)	 { psema(&((dqp)->q_flock), PINOD | PRECALC);\
-				   (dqp)->dq_flags |= XFS_DQ_FLOCKED; }
-#define xfs_dqfunlock(dqp)	 { ASSERT(issemalocked(&((dqp)->q_flock))); \
-				   vsema(&((dqp)->q_flock)); \
-				   (dqp)->dq_flags &= ~(XFS_DQ_FLOCKED); }
+static inline void xfs_dqflock(xfs_dquot_t *dqp)
+{
+	wait_for_completion(&dqp->q_flush);
+}
+
+static inline int xfs_dqflock_nowait(xfs_dquot_t *dqp)
+{
+	return try_wait_for_completion(&dqp->q_flush);
+}
+
+static inline void xfs_dqfunlock(xfs_dquot_t *dqp)
+{
+	complete(&dqp->q_flush);
+}
 
-#define XFS_DQ_IS_FLUSH_LOCKED(dqp) (issemalocked(&((dqp)->q_flock)))
 #define XFS_DQ_IS_ON_FREELIST(dqp)  ((dqp)->dq_flnext != (dqp))
 #define XFS_DQ_IS_DIRTY(dqp)	((dqp)->dq_flags & XFS_DQ_DIRTY)
 #define XFS_QM_ISUDQ(dqp)	((dqp)->dq_flags & XFS_DQ_USER)
@@ -164,10 +172,9 @@ extern void		xfs_qm_dqprint(xfs_dquot_t *);
 
 extern void		xfs_qm_dqdestroy(xfs_dquot_t *);
 extern int		xfs_qm_dqflush(xfs_dquot_t *, uint);
-extern int		xfs_qm_dqpurge(xfs_dquot_t *, uint);
+extern int		xfs_qm_dqpurge(xfs_dquot_t *);
 extern void		xfs_qm_dqunpin_wait(xfs_dquot_t *);
 extern int		xfs_qm_dqlock_nowait(xfs_dquot_t *);
-extern int		xfs_qm_dqflock_nowait(xfs_dquot_t *);
 extern void		xfs_qm_dqflock_pushbuf_wait(xfs_dquot_t *dqp);
 extern void		xfs_qm_adjust_dqtimers(xfs_mount_t *,
 					xfs_disk_dquot_t *);
diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/quota/xfs_dquot_item.c
index 36e05ca7841..f028644caa5 100644
--- a/fs/xfs/quota/xfs_dquot_item.c
+++ b/fs/xfs/quota/xfs_dquot_item.c
@@ -151,7 +151,7 @@ xfs_qm_dquot_logitem_push(
 	dqp = logitem->qli_dquot;
 
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
-	ASSERT(XFS_DQ_IS_FLUSH_LOCKED(dqp));
+	ASSERT(!completion_done(&dqp->q_flush));
 
 	/*
 	 * Since we were able to lock the dquot's flush lock and
@@ -245,7 +245,7 @@ xfs_qm_dquot_logitem_pushbuf(
 	 * inode flush completed and the inode was taken off the AIL.
 	 * So, just get out.
 	 */
-	if (!issemalocked(&(dqp->q_flock))  ||
+	if (completion_done(&dqp->q_flush)  ||
 	    ((qip->qli_item.li_flags & XFS_LI_IN_AIL) == 0)) {
 		qip->qli_pushbuf_flag = 0;
 		xfs_dqunlock(dqp);
@@ -258,7 +258,7 @@ xfs_qm_dquot_logitem_pushbuf(
 	if (bp != NULL) {
 		if (XFS_BUF_ISDELAYWRITE(bp)) {
 			dopush = ((qip->qli_item.li_flags & XFS_LI_IN_AIL) &&
-				  issemalocked(&(dqp->q_flock)));
+				  !completion_done(&dqp->q_flush));
 			qip->qli_pushbuf_flag = 0;
 			xfs_dqunlock(dqp);
 
@@ -317,7 +317,7 @@ xfs_qm_dquot_logitem_trylock(
 		return (XFS_ITEM_LOCKED);
 
 	retval = XFS_ITEM_SUCCESS;
-	if (! xfs_qm_dqflock_nowait(dqp)) {
+	if (!xfs_dqflock_nowait(dqp)) {
 		/*
 		 * The dquot is already being flushed.	It may have been
 		 * flushed delayed write, however, and we don't want to
@@ -576,8 +576,8 @@ xfs_qm_qoffend_logitem_committed(
 	 * xfs_trans_delete_ail() drops the AIL lock.
 	 */
 	xfs_trans_delete_ail(qfs->qql_item.li_mountp, (xfs_log_item_t *)qfs);
-	kmem_free(qfs, sizeof(xfs_qoff_logitem_t));
-	kmem_free(qfe, sizeof(xfs_qoff_logitem_t));
+	kmem_free(qfs);
+	kmem_free(qfe);
 	return (xfs_lsn_t)-1;
 }
 
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index d31cce1165c..df0ffef9775 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -192,8 +192,8 @@ xfs_qm_destroy(
 		xfs_qm_list_destroy(&(xqm->qm_usr_dqhtable[i]));
 		xfs_qm_list_destroy(&(xqm->qm_grp_dqhtable[i]));
 	}
-	kmem_free(xqm->qm_usr_dqhtable, hsize * sizeof(xfs_dqhash_t));
-	kmem_free(xqm->qm_grp_dqhtable, hsize * sizeof(xfs_dqhash_t));
+	kmem_free(xqm->qm_usr_dqhtable);
+	kmem_free(xqm->qm_grp_dqhtable);
 	xqm->qm_usr_dqhtable = NULL;
 	xqm->qm_grp_dqhtable = NULL;
 	xqm->qm_dqhashmask = 0;
@@ -201,7 +201,7 @@ xfs_qm_destroy(
 #ifdef DEBUG
 	mutex_destroy(&qcheck_lock);
 #endif
-	kmem_free(xqm, sizeof(xfs_qm_t));
+	kmem_free(xqm);
 }
 
 /*
@@ -310,8 +310,7 @@ xfs_qm_unmount_quotadestroy(
  */
 void
 xfs_qm_mount_quotas(
-	xfs_mount_t	*mp,
-	int		mfsi_flags)
+	xfs_mount_t	*mp)
 {
 	int		error = 0;
 	uint		sbf;
@@ -346,8 +345,7 @@ xfs_qm_mount_quotas(
 	/*
 	 * If any of the quotas are not consistent, do a quotacheck.
 	 */
-	if (XFS_QM_NEED_QUOTACHECK(mp) &&
-	    !(mfsi_flags & XFS_MFSI_NO_QUOTACHECK)) {
+	if (XFS_QM_NEED_QUOTACHECK(mp)) {
 		error = xfs_qm_quotacheck(mp);
 		if (error) {
 			/* Quotacheck failed and disabled quotas. */
@@ -445,11 +443,11 @@ xfs_qm_unmount_quotas(
 		}
 	}
 	if (uqp) {
-		 XFS_PURGE_INODE(uqp);
+		 IRELE(uqp);
 		 mp->m_quotainfo->qi_uquotaip = NULL;
 	}
 	if (gqp) {
-		XFS_PURGE_INODE(gqp);
+		IRELE(gqp);
 		mp->m_quotainfo->qi_gquotaip = NULL;
 	}
 out:
@@ -484,7 +482,7 @@ again:
 		xfs_dqtrace_entry(dqp, "FLUSHALL: DQDIRTY");
 		/* XXX a sentinel would be better */
 		recl = XFS_QI_MPLRECLAIMS(mp);
-		if (! xfs_qm_dqflock_nowait(dqp)) {
+		if (!xfs_dqflock_nowait(dqp)) {
 			/*
 			 * If we can't grab the flush lock then check
 			 * to see if the dquot has been flushed delayed
@@ -631,7 +629,7 @@ xfs_qm_dqpurge_int(
 		 * freelist in INACTIVE state.
 		 */
 		nextdqp = dqp->MPL_NEXT;
-		nmisses += xfs_qm_dqpurge(dqp, flags);
+		nmisses += xfs_qm_dqpurge(dqp);
 		dqp = nextdqp;
 	}
 	xfs_qm_mplist_unlock(mp);
@@ -1062,7 +1060,7 @@ xfs_qm_sync(
 
 		/* XXX a sentinel would be better */
 		recl = XFS_QI_MPLRECLAIMS(mp);
-		if (! xfs_qm_dqflock_nowait(dqp)) {
+		if (!xfs_dqflock_nowait(dqp)) {
 			if (nowait) {
 				xfs_dqunlock(dqp);
 				continue;
@@ -1134,7 +1132,7 @@ xfs_qm_init_quotainfo(
 	 * and change the superblock accordingly.
 	 */
 	if ((error = xfs_qm_init_quotainos(mp))) {
-		kmem_free(qinf, sizeof(xfs_quotainfo_t));
+		kmem_free(qinf);
 		mp->m_quotainfo = NULL;
 		return error;
 	}
@@ -1240,15 +1238,15 @@ xfs_qm_destroy_quotainfo(
 	xfs_qm_list_destroy(&qi->qi_dqlist);
 
 	if (qi->qi_uquotaip) {
-		XFS_PURGE_INODE(qi->qi_uquotaip);
+		IRELE(qi->qi_uquotaip);
 		qi->qi_uquotaip = NULL; /* paranoia */
 	}
 	if (qi->qi_gquotaip) {
-		XFS_PURGE_INODE(qi->qi_gquotaip);
+		IRELE(qi->qi_gquotaip);
 		qi->qi_gquotaip = NULL;
 	}
 	mutex_destroy(&qi->qi_quotaofflock);
-	kmem_free(qi, sizeof(xfs_quotainfo_t));
+	kmem_free(qi);
 	mp->m_quotainfo = NULL;
 }
 
@@ -1394,7 +1392,7 @@ xfs_qm_qino_alloc(
 	 * locked exclusively and joined to the transaction already.
 	 */
 	ASSERT(xfs_isilocked(*ip, XFS_ILOCK_EXCL));
-	VN_HOLD(XFS_ITOV((*ip)));
+	IHOLD(*ip);
 
 	/*
 	 * Make the changes in the superblock, and log those too.
@@ -1623,7 +1621,7 @@ xfs_qm_dqiterate(
 			break;
 	} while (nmaps > 0);
 
-	kmem_free(map, XFS_DQITER_MAP_SIZE * sizeof(*map));
+	kmem_free(map);
 
 	return error;
 }
@@ -2079,7 +2077,7 @@ xfs_qm_shake_freelist(
 		 * Try to grab the flush lock. If this dquot is in the process of
 		 * getting flushed to disk, we don't want to reclaim it.
 		 */
-		if (! xfs_qm_dqflock_nowait(dqp)) {
+		if (!xfs_dqflock_nowait(dqp)) {
 			xfs_dqunlock(dqp);
 			dqp = dqp->dq_flnext;
 			continue;
@@ -2257,7 +2255,7 @@ xfs_qm_dqreclaim_one(void)
 		 * Try to grab the flush lock. If this dquot is in the process of
 		 * getting flushed to disk, we don't want to reclaim it.
 		 */
-		if (! xfs_qm_dqflock_nowait(dqp)) {
+		if (!xfs_dqflock_nowait(dqp)) {
 			xfs_dqunlock(dqp);
 			continue;
 		}
diff --git a/fs/xfs/quota/xfs_qm.h b/fs/xfs/quota/xfs_qm.h
index cd2300e374a..44f25349e47 100644
--- a/fs/xfs/quota/xfs_qm.h
+++ b/fs/xfs/quota/xfs_qm.h
@@ -165,7 +165,7 @@ typedef struct xfs_dquot_acct {
 #define XFS_QM_RELE(xqm)	((xqm)->qm_nrefs--)
 
 extern void		xfs_qm_destroy_quotainfo(xfs_mount_t *);
-extern void		xfs_qm_mount_quotas(xfs_mount_t *, int);
+extern void		xfs_qm_mount_quotas(xfs_mount_t *);
 extern int		xfs_qm_quotacheck(xfs_mount_t *);
 extern void		xfs_qm_unmount_quotadestroy(xfs_mount_t *);
 extern int		xfs_qm_unmount_quotas(xfs_mount_t *);
diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c
index f4f6c4c861d..eea2e60b456 100644
--- a/fs/xfs/quota/xfs_qm_bhv.c
+++ b/fs/xfs/quota/xfs_qm_bhv.c
@@ -162,7 +162,7 @@ xfs_qm_newmount(
 			 * mounting, and get on with the boring life
 			 * without disk quotas.
 			 */
-			xfs_qm_mount_quotas(mp, 0);
+			xfs_qm_mount_quotas(mp);
 		} else {
 			/*
 			 * Clear the quota flags, but remember them. This
@@ -184,13 +184,12 @@ STATIC int
 xfs_qm_endmount(
 	xfs_mount_t	*mp,
 	uint		needquotamount,
-	uint		quotaflags,
-	int		mfsi_flags)
+	uint		quotaflags)
 {
 	if (needquotamount) {
 		ASSERT(mp->m_qflags == 0);
 		mp->m_qflags = quotaflags;
-		xfs_qm_mount_quotas(mp, mfsi_flags);
+		xfs_qm_mount_quotas(mp);
 	}
 
 #if defined(DEBUG) && defined(XFS_LOUD_RECOVERY)
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 768a3b27d2b..1a3b803dfa5 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -362,11 +362,11 @@ xfs_qm_scall_quotaoff(
 	 * if we don't need them anymore.
 	 */
 	if ((dqtype & XFS_QMOPT_UQUOTA) && XFS_QI_UQIP(mp)) {
-		XFS_PURGE_INODE(XFS_QI_UQIP(mp));
+		IRELE(XFS_QI_UQIP(mp));
 		XFS_QI_UQIP(mp) = NULL;
 	}
 	if ((dqtype & (XFS_QMOPT_GQUOTA|XFS_QMOPT_PQUOTA)) && XFS_QI_GQIP(mp)) {
-		XFS_PURGE_INODE(XFS_QI_GQIP(mp));
+		IRELE(XFS_QI_GQIP(mp));
 		XFS_QI_GQIP(mp) = NULL;
 	}
 out_error:
@@ -1034,7 +1034,7 @@ xfs_qm_dqrele_all_inodes(
 {
 	xfs_inode_t	*ip, *topino;
 	uint		ireclaims;
-	bhv_vnode_t	*vp;
+	struct inode	*vp;
 	boolean_t	vnode_refd;
 
 	ASSERT(mp->m_quotainfo);
@@ -1059,7 +1059,7 @@ again:
 			ip = ip->i_mnext;
 			continue;
 		}
-		vp = XFS_ITOV_NULL(ip);
+		vp = VFS_I(ip);
 		if (!vp) {
 			ASSERT(ip->i_udquot == NULL);
 			ASSERT(ip->i_gdquot == NULL);
@@ -1449,14 +1449,14 @@ xfs_qm_internalqcheck(
 		for (d = (xfs_dqtest_t *) h1->qh_next; d != NULL; ) {
 			xfs_dqtest_cmp(d);
 			e = (xfs_dqtest_t *) d->HL_NEXT;
-			kmem_free(d, sizeof(xfs_dqtest_t));
+			kmem_free(d);
 			d = e;
 		}
 		h1 = &qmtest_gdqtab[i];
 		for (d = (xfs_dqtest_t *) h1->qh_next; d != NULL; ) {
 			xfs_dqtest_cmp(d);
 			e = (xfs_dqtest_t *) d->HL_NEXT;
-			kmem_free(d, sizeof(xfs_dqtest_t));
+			kmem_free(d);
 			d = e;
 		}
 	}
@@ -1467,8 +1467,8 @@ xfs_qm_internalqcheck(
 	} else {
 		cmn_err(CE_DEBUG, "******** quotacheck successful! ********");
 	}
-	kmem_free(qmtest_udqtab, qmtest_hashmask * sizeof(xfs_dqhash_t));
-	kmem_free(qmtest_gdqtab, qmtest_hashmask * sizeof(xfs_dqhash_t));
+	kmem_free(qmtest_udqtab);
+	kmem_free(qmtest_gdqtab);
 	mutex_unlock(&qcheck_lock);
 	return (qmtest_nfails);
 }
diff --git a/fs/xfs/quota/xfs_quota_priv.h b/fs/xfs/quota/xfs_quota_priv.h
index 5e4a40b1c56..c4fcea600bc 100644
--- a/fs/xfs/quota/xfs_quota_priv.h
+++ b/fs/xfs/quota/xfs_quota_priv.h
@@ -158,9 +158,6 @@ for ((dqp) = (qlist)->qh_next; (dqp) != (xfs_dquot_t *)(qlist); \
 #define XFS_IS_SUSER_DQUOT(dqp)		\
 	(!((dqp)->q_core.d_id))
 
-#define XFS_PURGE_INODE(ip)		\
-	IRELE(ip);
-
 #define DQFLAGTO_TYPESTR(d)	(((d)->dq_flags & XFS_DQ_USER) ? "USR" : \
 				 (((d)->dq_flags & XFS_DQ_GROUP) ? "GRP" : \
 				 (((d)->dq_flags & XFS_DQ_PROJ) ? "PRJ":"???")))
diff --git a/fs/xfs/support/ktrace.c b/fs/xfs/support/ktrace.c
index 0b75d302508..a34ef05489b 100644
--- a/fs/xfs/support/ktrace.c
+++ b/fs/xfs/support/ktrace.c
@@ -89,7 +89,7 @@ ktrace_alloc(int nentries, unsigned int __nocast sleep)
 		if (sleep & KM_SLEEP)
 			panic("ktrace_alloc: NULL memory on KM_SLEEP request!");
 
-		kmem_free(ktp, sizeof(*ktp));
+		kmem_free(ktp);
 
 		return NULL;
 	}
@@ -126,7 +126,7 @@ ktrace_free(ktrace_t *ktp)
 	} else {
 		entries_size = (int)(ktp->kt_nentries * sizeof(ktrace_entry_t));
 
-		kmem_free(ktp->kt_entries, entries_size);
+		kmem_free(ktp->kt_entries);
 	}
 
 	kmem_zone_free(ktrace_hdr_zone, ktp);
diff --git a/fs/xfs/support/uuid.c b/fs/xfs/support/uuid.c
index 493a6ecf859..5830c040ea7 100644
--- a/fs/xfs/support/uuid.c
+++ b/fs/xfs/support/uuid.c
@@ -17,7 +17,7 @@
  */
 #include <xfs.h>
 
-static mutex_t	uuid_monitor;
+static DEFINE_MUTEX(uuid_monitor);
 static int	uuid_table_size;
 static uuid_t	*uuid_table;
 
@@ -132,9 +132,3 @@ uuid_table_remove(uuid_t *uuid)
 	ASSERT(i < uuid_table_size);
 	mutex_unlock(&uuid_monitor);
 }
-
-void __init
-uuid_init(void)
-{
-	mutex_init(&uuid_monitor);
-}
diff --git a/fs/xfs/support/uuid.h b/fs/xfs/support/uuid.h
index b6f5922199b..cff5b607d44 100644
--- a/fs/xfs/support/uuid.h
+++ b/fs/xfs/support/uuid.h
@@ -22,7 +22,6 @@ typedef struct {
 	unsigned char	__u_bits[16];
 } uuid_t;
 
-extern void uuid_init(void);
 extern void uuid_create_nil(uuid_t *uuid);
 extern int uuid_is_nil(uuid_t *uuid);
 extern int uuid_equal(uuid_t *uuid1, uuid_t *uuid2);
diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c
index ebee3a4f703..b2f639a1416 100644
--- a/fs/xfs/xfs_acl.c
+++ b/fs/xfs/xfs_acl.c
@@ -37,15 +37,15 @@
 #include <linux/capability.h>
 #include <linux/posix_acl_xattr.h>
 
-STATIC int	xfs_acl_setmode(bhv_vnode_t *, xfs_acl_t *, int *);
+STATIC int	xfs_acl_setmode(struct inode *, xfs_acl_t *, int *);
 STATIC void     xfs_acl_filter_mode(mode_t, xfs_acl_t *);
 STATIC void	xfs_acl_get_endian(xfs_acl_t *);
 STATIC int	xfs_acl_access(uid_t, gid_t, xfs_acl_t *, mode_t, cred_t *);
 STATIC int	xfs_acl_invalid(xfs_acl_t *);
 STATIC void	xfs_acl_sync_mode(mode_t, xfs_acl_t *);
-STATIC void	xfs_acl_get_attr(bhv_vnode_t *, xfs_acl_t *, int, int, int *);
-STATIC void	xfs_acl_set_attr(bhv_vnode_t *, xfs_acl_t *, int, int *);
-STATIC int	xfs_acl_allow_set(bhv_vnode_t *, int);
+STATIC void	xfs_acl_get_attr(struct inode *, xfs_acl_t *, int, int, int *);
+STATIC void	xfs_acl_set_attr(struct inode *, xfs_acl_t *, int, int *);
+STATIC int	xfs_acl_allow_set(struct inode *, int);
 
 kmem_zone_t *xfs_acl_zone;
 
@@ -55,7 +55,7 @@ kmem_zone_t *xfs_acl_zone;
  */
 int
 xfs_acl_vhasacl_access(
-	bhv_vnode_t	*vp)
+	struct inode	*vp)
 {
 	int		error;
 
@@ -68,7 +68,7 @@ xfs_acl_vhasacl_access(
  */
 int
 xfs_acl_vhasacl_default(
-	bhv_vnode_t	*vp)
+	struct inode	*vp)
 {
 	int		error;
 
@@ -207,7 +207,7 @@ posix_acl_xfs_to_xattr(
 
 int
 xfs_acl_vget(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	void		*acl,
 	size_t		size,
 	int		kind)
@@ -217,7 +217,6 @@ xfs_acl_vget(
 	posix_acl_xattr_header	*ext_acl = acl;
 	int			flags = 0;
 
-	VN_HOLD(vp);
 	if(size) {
 		if (!(_ACL_ALLOC(xfs_acl))) {
 			error = ENOMEM;
@@ -239,11 +238,10 @@ xfs_acl_vget(
 			goto out;
 		}
 		if (kind == _ACL_TYPE_ACCESS)
-			xfs_acl_sync_mode(xfs_vtoi(vp)->i_d.di_mode, xfs_acl);
+			xfs_acl_sync_mode(XFS_I(vp)->i_d.di_mode, xfs_acl);
 		error = -posix_acl_xfs_to_xattr(xfs_acl, ext_acl, size);
 	}
 out:
-	VN_RELE(vp);
 	if(xfs_acl)
 		_ACL_FREE(xfs_acl);
 	return -error;
@@ -251,28 +249,26 @@ out:
 
 int
 xfs_acl_vremove(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	int		kind)
 {
 	int		error;
 
-	VN_HOLD(vp);
 	error = xfs_acl_allow_set(vp, kind);
 	if (!error) {
-		error = xfs_attr_remove(xfs_vtoi(vp),
+		error = xfs_attr_remove(XFS_I(vp),
 						kind == _ACL_TYPE_DEFAULT?
 						SGI_ACL_DEFAULT: SGI_ACL_FILE,
 						ATTR_ROOT);
 		if (error == ENOATTR)
 			error = 0;	/* 'scool */
 	}
-	VN_RELE(vp);
 	return -error;
 }
 
 int
 xfs_acl_vset(
-	bhv_vnode_t		*vp,
+	struct inode		*vp,
 	void			*acl,
 	size_t			size,
 	int			kind)
@@ -298,7 +294,6 @@ xfs_acl_vset(
 		return 0;
 	}
 
-	VN_HOLD(vp);
 	error = xfs_acl_allow_set(vp, kind);
 
 	/* Incoming ACL exists, set file mode based on its value */
@@ -321,7 +316,6 @@ xfs_acl_vset(
 	}
 
 out:
-	VN_RELE(vp);
 	_ACL_FREE(xfs_acl);
 	return -error;
 }
@@ -341,8 +335,7 @@ xfs_acl_iaccess(
 
 	/* If the file has no ACL return -1. */
 	rval = sizeof(xfs_acl_t);
-	if (xfs_attr_fetch(ip, &acl_name, (char *)acl, &rval,
-					ATTR_ROOT | ATTR_KERNACCESS)) {
+	if (xfs_attr_fetch(ip, &acl_name, (char *)acl, &rval, ATTR_ROOT)) {
 		_ACL_FREE(acl);
 		return -1;
 	}
@@ -364,7 +357,7 @@ xfs_acl_iaccess(
 
 STATIC int
 xfs_acl_allow_set(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	int		kind)
 {
 	if (vp->i_flags & (S_IMMUTABLE|S_APPEND))
@@ -373,7 +366,7 @@ xfs_acl_allow_set(
 		return ENOTDIR;
 	if (vp->i_sb->s_flags & MS_RDONLY)
 		return EROFS;
-	if (xfs_vtoi(vp)->i_d.di_uid != current->fsuid && !capable(CAP_FOWNER))
+	if (XFS_I(vp)->i_d.di_uid != current->fsuid && !capable(CAP_FOWNER))
 		return EPERM;
 	return 0;
 }
@@ -567,7 +560,7 @@ xfs_acl_get_endian(
  */
 STATIC void
 xfs_acl_get_attr(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	xfs_acl_t	*aclp,
 	int		kind,
 	int		flags,
@@ -577,7 +570,7 @@ xfs_acl_get_attr(
 
 	ASSERT((flags & ATTR_KERNOVAL) ? (aclp == NULL) : 1);
 	flags |= ATTR_ROOT;
-	*error = xfs_attr_get(xfs_vtoi(vp),
+	*error = xfs_attr_get(XFS_I(vp),
 					kind == _ACL_TYPE_ACCESS ?
 					SGI_ACL_FILE : SGI_ACL_DEFAULT,
 					(char *)aclp, &len, flags);
@@ -591,7 +584,7 @@ xfs_acl_get_attr(
  */
 STATIC void
 xfs_acl_set_attr(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	xfs_acl_t	*aclp,
 	int		kind,
 	int		*error)
@@ -616,7 +609,7 @@ xfs_acl_set_attr(
 		INT_SET(newace->ae_perm, ARCH_CONVERT, ace->ae_perm);
 	}
 	INT_SET(newacl->acl_cnt, ARCH_CONVERT, aclp->acl_cnt);
-	*error = xfs_attr_set(xfs_vtoi(vp),
+	*error = xfs_attr_set(XFS_I(vp),
 				kind == _ACL_TYPE_ACCESS ?
 				SGI_ACL_FILE: SGI_ACL_DEFAULT,
 				(char *)newacl, len, ATTR_ROOT);
@@ -625,7 +618,7 @@ xfs_acl_set_attr(
 
 int
 xfs_acl_vtoacl(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	xfs_acl_t	*access_acl,
 	xfs_acl_t	*default_acl)
 {
@@ -640,7 +633,7 @@ xfs_acl_vtoacl(
 		if (error)
 			access_acl->acl_cnt = XFS_ACL_NOT_PRESENT;
 		else /* We have a good ACL and the file mode, synchronize. */
-			xfs_acl_sync_mode(xfs_vtoi(vp)->i_d.di_mode, access_acl);
+			xfs_acl_sync_mode(XFS_I(vp)->i_d.di_mode, access_acl);
 	}
 
 	if (default_acl) {
@@ -657,7 +650,7 @@ xfs_acl_vtoacl(
  */
 int
 xfs_acl_inherit(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	mode_t		mode,
 	xfs_acl_t	*pdaclp)
 {
@@ -716,11 +709,11 @@ out_error:
  */
 STATIC int
 xfs_acl_setmode(
-	bhv_vnode_t	*vp,
+	struct inode	*vp,
 	xfs_acl_t	*acl,
 	int		*basicperms)
 {
-	bhv_vattr_t	va;
+	struct iattr	iattr;
 	xfs_acl_entry_t	*ap;
 	xfs_acl_entry_t	*gap = NULL;
 	int		i, nomask = 1;
@@ -734,25 +727,25 @@ xfs_acl_setmode(
 	 * Copy the u::, g::, o::, and m:: bits from the ACL into the
 	 * mode.  The m:: bits take precedence over the g:: bits.
 	 */
-	va.va_mask = XFS_AT_MODE;
-	va.va_mode = xfs_vtoi(vp)->i_d.di_mode;
-	va.va_mode &= ~(S_IRWXU|S_IRWXG|S_IRWXO);
+	iattr.ia_valid = ATTR_MODE;
+	iattr.ia_mode = XFS_I(vp)->i_d.di_mode;
+	iattr.ia_mode &= ~(S_IRWXU|S_IRWXG|S_IRWXO);
 	ap = acl->acl_entry;
 	for (i = 0; i < acl->acl_cnt; ++i) {
 		switch (ap->ae_tag) {
 		case ACL_USER_OBJ:
-			va.va_mode |= ap->ae_perm << 6;
+			iattr.ia_mode |= ap->ae_perm << 6;
 			break;
 		case ACL_GROUP_OBJ:
 			gap = ap;
 			break;
 		case ACL_MASK:	/* more than just standard modes */
 			nomask = 0;
-			va.va_mode |= ap->ae_perm << 3;
+			iattr.ia_mode |= ap->ae_perm << 3;
 			*basicperms = 0;
 			break;
 		case ACL_OTHER:
-			va.va_mode |= ap->ae_perm;
+			iattr.ia_mode |= ap->ae_perm;
 			break;
 		default:	/* more than just standard modes */
 			*basicperms = 0;
@@ -763,9 +756,9 @@ xfs_acl_setmode(
 
 	/* Set the group bits from ACL_GROUP_OBJ if there's no ACL_MASK */
 	if (gap && nomask)
-		va.va_mode |= gap->ae_perm << 3;
+		iattr.ia_mode |= gap->ae_perm << 3;
 
-	return xfs_setattr(xfs_vtoi(vp), &va, 0, sys_cred);
+	return xfs_setattr(XFS_I(vp), &iattr, 0, sys_cred);
 }
 
 /*
diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h
index 332a772461c..a4e293b93ef 100644
--- a/fs/xfs/xfs_acl.h
+++ b/fs/xfs/xfs_acl.h
@@ -46,6 +46,8 @@ typedef struct xfs_acl {
 #define SGI_ACL_FILE_SIZE	(sizeof(SGI_ACL_FILE)-1)
 #define SGI_ACL_DEFAULT_SIZE	(sizeof(SGI_ACL_DEFAULT)-1)
 
+#define _ACL_TYPE_ACCESS	1
+#define _ACL_TYPE_DEFAULT	2
 
 #ifdef CONFIG_XFS_POSIX_ACL
 
@@ -57,17 +59,15 @@ extern struct kmem_zone *xfs_acl_zone;
 		(zone) = kmem_zone_init(sizeof(xfs_acl_t), (name))
 #define xfs_acl_zone_destroy(zone)	kmem_zone_destroy(zone)
 
-extern int xfs_acl_inherit(bhv_vnode_t *, mode_t mode, xfs_acl_t *);
+extern int xfs_acl_inherit(struct inode *, mode_t mode, xfs_acl_t *);
 extern int xfs_acl_iaccess(struct xfs_inode *, mode_t, cred_t *);
-extern int xfs_acl_vtoacl(bhv_vnode_t *, xfs_acl_t *, xfs_acl_t *);
-extern int xfs_acl_vhasacl_access(bhv_vnode_t *);
-extern int xfs_acl_vhasacl_default(bhv_vnode_t *);
-extern int xfs_acl_vset(bhv_vnode_t *, void *, size_t, int);
-extern int xfs_acl_vget(bhv_vnode_t *, void *, size_t, int);
-extern int xfs_acl_vremove(bhv_vnode_t *, int);
+extern int xfs_acl_vtoacl(struct inode *, xfs_acl_t *, xfs_acl_t *);
+extern int xfs_acl_vhasacl_access(struct inode *);
+extern int xfs_acl_vhasacl_default(struct inode *);
+extern int xfs_acl_vset(struct inode *, void *, size_t, int);
+extern int xfs_acl_vget(struct inode *, void *, size_t, int);
+extern int xfs_acl_vremove(struct inode *, int);
 
-#define _ACL_TYPE_ACCESS	1
-#define _ACL_TYPE_DEFAULT	2
 #define _ACL_PERM_INVALID(perm)	((perm) & ~(ACL_READ|ACL_WRITE|ACL_EXECUTE))
 
 #define _ACL_INHERIT(c,m,d)	(xfs_acl_inherit(c,m,d))
diff --git a/fs/xfs/xfs_arch.h b/fs/xfs/xfs_arch.h
index f9472a2076d..0b3b5efe848 100644
--- a/fs/xfs/xfs_arch.h
+++ b/fs/xfs/xfs_arch.h
@@ -92,16 +92,6 @@
 	((__u8*)(pointer))[1] = (((value)     ) & 0xff); \
     }
 
-/* define generic INT_ macros */
-
-#define INT_GET(reference,arch) \
-    (((arch) == ARCH_NOCONVERT) \
-	? \
-	    (reference) \
-	: \
-	    INT_SWAP((reference),(reference)) \
-    )
-
 /* does not return a value */
 #define INT_SET(reference,arch,valueref) \
     (__builtin_constant_p(valueref) ? \
@@ -112,64 +102,6 @@
 	) \
     )
 
-/* does not return a value */
-#define INT_MOD_EXPR(reference,arch,code) \
-    (((arch) == ARCH_NOCONVERT) \
-	? \
-	    (void)((reference) code) \
-	: \
-	    (void)( \
-		(reference) = INT_GET((reference),arch) , \
-		((reference) code), \
-		INT_SET(reference, arch, reference) \
-	    ) \
-    )
-
-/* does not return a value */
-#define INT_MOD(reference,arch,delta) \
-    (void)( \
-	INT_MOD_EXPR(reference,arch,+=(delta)) \
-    )
-
-/*
- * INT_COPY - copy a value between two locations with the
- *	      _same architecture_ but _potentially different sizes_
- *
- *	    if the types of the two parameters are equal or they are
- *		in native architecture, a simple copy is done
- *
- *	    otherwise, architecture conversions are done
- *
- */
-
-/* does not return a value */
-#define INT_COPY(dst,src,arch) \
-    ( \
-	((sizeof(dst) == sizeof(src)) || ((arch) == ARCH_NOCONVERT)) \
-	    ? \
-		(void)((dst) = (src)) \
-	    : \
-		INT_SET(dst, arch, INT_GET(src, arch)) \
-    )
-
-/*
- * INT_XLATE - copy a value in either direction between two locations
- *	       with different architectures
- *
- *		    dir < 0	- copy from memory to buffer (native to arch)
- *		    dir > 0	- copy from buffer to memory (arch to native)
- */
-
-/* does not return a value */
-#define INT_XLATE(buf,mem,dir,arch) {\
-    ASSERT(dir); \
-    if (dir>0) { \
-	(mem)=INT_GET(buf, arch); \
-    } else { \
-	INT_SET(buf, arch, mem); \
-    } \
-}
-
 /*
  * In directories inode numbers are stored as unaligned arrays of unsigned
  * 8bit integers on disk.
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index df151a85918..f7cdc28aff4 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -16,8 +16,6 @@
  * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/capability.h>
-
 #include "xfs.h"
 #include "xfs_fs.h"
 #include "xfs_types.h"
@@ -57,11 +55,6 @@
  * Provide the external interfaces to manage attribute lists.
  */
 
-#define ATTR_SYSCOUNT	2
-static struct attrnames posix_acl_access;
-static struct attrnames posix_acl_default;
-static struct attrnames *attr_system_names[ATTR_SYSCOUNT];
-
 /*========================================================================
  * Function prototypes for the kernel.
  *========================================================================*/
@@ -116,6 +109,17 @@ xfs_attr_name_to_xname(
 	return 0;
 }
 
+STATIC int
+xfs_inode_hasattr(
+	struct xfs_inode	*ip)
+{
+	if (!XFS_IFORK_Q(ip) ||
+	    (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
+	     ip->i_d.di_anextents == 0))
+		return 0;
+	return 1;
+}
+
 /*========================================================================
  * Overall external interface routines.
  *========================================================================*/
@@ -127,10 +131,8 @@ xfs_attr_fetch(xfs_inode_t *ip, struct xfs_name *name,
 	xfs_da_args_t   args;
 	int             error;
 
-	if ((XFS_IFORK_Q(ip) == 0) ||
-	    (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     ip->i_d.di_anextents == 0))
-		return(ENOATTR);
+	if (!xfs_inode_hasattr(ip))
+		return ENOATTR;
 
 	/*
 	 * Fill in the arg structure for this request.
@@ -148,11 +150,7 @@ xfs_attr_fetch(xfs_inode_t *ip, struct xfs_name *name,
 	/*
 	 * Decide on what work routines to call based on the inode size.
 	 */
-	if (XFS_IFORK_Q(ip) == 0 ||
-	    (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     ip->i_d.di_anextents == 0)) {
-		error = XFS_ERROR(ENOATTR);
-	} else if (ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) {
+	if (ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) {
 		error = xfs_attr_shortform_getvalue(&args);
 	} else if (xfs_bmap_one_block(ip, XFS_ATTR_FORK)) {
 		error = xfs_attr_leaf_get(&args);
@@ -196,6 +194,46 @@ xfs_attr_get(
 	return(error);
 }
 
+/*
+ * Calculate how many blocks we need for the new attribute,
+ */
+int
+xfs_attr_calc_size(
+	struct xfs_inode 	*ip,
+	int			namelen,
+	int			valuelen,
+	int			*local)
+{
+	struct xfs_mount 	*mp = ip->i_mount;
+	int			size;
+	int			nblks;
+
+	/*
+	 * Determine space new attribute will use, and if it would be
+	 * "local" or "remote" (note: local != inline).
+	 */
+	size = xfs_attr_leaf_newentsize(namelen, valuelen,
+					mp->m_sb.sb_blocksize, local);
+
+	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
+	if (*local) {
+		if (size > (mp->m_sb.sb_blocksize >> 1)) {
+			/* Double split possible */
+			nblks *= 2;
+		}
+	} else {
+		/*
+		 * Out of line attribute, cannot double split, but
+		 * make room for the attribute value itself.
+		 */
+		uint	dblocks = XFS_B_TO_FSB(mp, valuelen);
+		nblks += dblocks;
+		nblks += XFS_NEXTENTADD_SPACE_RES(mp, dblocks, XFS_ATTR_FORK);
+	}
+
+	return nblks;
+}
+
 STATIC int
 xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 		char *value, int valuelen, int flags)
@@ -204,10 +242,9 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 	xfs_fsblock_t	firstblock;
 	xfs_bmap_free_t flist;
 	int		error, err2, committed;
-	int		local, size;
-	uint		nblks;
 	xfs_mount_t	*mp = dp->i_mount;
 	int             rsvd = (flags & ATTR_ROOT) != 0;
+	int		local;
 
 	/*
 	 * Attach the dquots to the inode.
@@ -241,33 +278,10 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 	args.firstblock = &firstblock;
 	args.flist = &flist;
 	args.whichfork = XFS_ATTR_FORK;
-	args.addname = 1;
-	args.oknoent = 1;
-
-	/*
-	 * Determine space new attribute will use, and if it would be
-	 * "local" or "remote" (note: local != inline).
-	 */
-	size = xfs_attr_leaf_newentsize(name->len, valuelen,
-					mp->m_sb.sb_blocksize, &local);
-
-	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
-	if (local) {
-		if (size > (mp->m_sb.sb_blocksize >> 1)) {
-			/* Double split possible */
-			nblks <<= 1;
-		}
-	} else {
-		uint	dblocks = XFS_B_TO_FSB(mp, valuelen);
-		/* Out of line attribute, cannot double split, but make
-		 * room for the attribute value itself.
-		 */
-		nblks += dblocks;
-		nblks += XFS_NEXTENTADD_SPACE_RES(mp, dblocks, XFS_ATTR_FORK);
-	}
+	args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT;
 
 	/* Size is now blocks for attribute data */
-	args.total = nblks;
+	args.total = xfs_attr_calc_size(dp, name->len, valuelen, &local);
 
 	/*
 	 * Start our first transaction of the day.
@@ -289,18 +303,17 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 	if (rsvd)
 		args.trans->t_flags |= XFS_TRANS_RESERVE;
 
-	if ((error = xfs_trans_reserve(args.trans, (uint) nblks,
-				      XFS_ATTRSET_LOG_RES(mp, nblks),
-				      0, XFS_TRANS_PERM_LOG_RES,
-				      XFS_ATTRSET_LOG_COUNT))) {
+	if ((error = xfs_trans_reserve(args.trans, args.total,
+			XFS_ATTRSET_LOG_RES(mp, args.total), 0,
+			XFS_TRANS_PERM_LOG_RES, XFS_ATTRSET_LOG_COUNT))) {
 		xfs_trans_cancel(args.trans, 0);
 		return(error);
 	}
 	xfs_ilock(dp, XFS_ILOCK_EXCL);
 
-	error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, args.trans, dp, nblks, 0,
-			 rsvd ? XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES :
-				XFS_QMOPT_RES_REGBLKS);
+	error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, args.trans, dp, args.total, 0,
+				rsvd ? XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES :
+				       XFS_QMOPT_RES_REGBLKS);
 	if (error) {
 		xfs_iunlock(dp, XFS_ILOCK_EXCL);
 		xfs_trans_cancel(args.trans, XFS_TRANS_RELEASE_LOG_RES);
@@ -387,7 +400,9 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 		 * Commit the leaf transformation.  We'll need another (linked)
 		 * transaction to add the new attribute to the leaf.
 		 */
-		if ((error = xfs_attr_rolltrans(&args.trans, dp)))
+
+		error = xfs_trans_roll(&args.trans, dp);
+		if (error)
 			goto out;
 
 	}
@@ -529,9 +544,7 @@ xfs_attr_remove_int(xfs_inode_t *dp, struct xfs_name *name, int flags)
 	/*
 	 * Decide on what work routines to call based on the inode size.
 	 */
-	if (XFS_IFORK_Q(dp) == 0 ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     dp->i_d.di_anextents == 0)) {
+	if (!xfs_inode_hasattr(dp)) {
 		error = XFS_ERROR(ENOATTR);
 		goto out;
 	}
@@ -601,29 +614,33 @@ xfs_attr_remove(
 		return error;
 
 	xfs_ilock(dp, XFS_ILOCK_SHARED);
-	if (XFS_IFORK_Q(dp) == 0 ||
-		   (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-		    dp->i_d.di_anextents == 0)) {
+	if (!xfs_inode_hasattr(dp)) {
 		xfs_iunlock(dp, XFS_ILOCK_SHARED);
-		return(XFS_ERROR(ENOATTR));
+		return XFS_ERROR(ENOATTR);
 	}
 	xfs_iunlock(dp, XFS_ILOCK_SHARED);
 
 	return xfs_attr_remove_int(dp, &xname, flags);
 }
 
-STATIC int
+int
 xfs_attr_list_int(xfs_attr_list_context_t *context)
 {
 	int error;
 	xfs_inode_t *dp = context->dp;
 
+	XFS_STATS_INC(xs_attr_list);
+
+	if (XFS_FORCED_SHUTDOWN(dp->i_mount))
+		return EIO;
+
+	xfs_ilock(dp, XFS_ILOCK_SHARED);
+	xfs_attr_trace_l_c("syscall start", context);
+
 	/*
 	 * Decide on what work routines to call based on the inode size.
 	 */
-	if (XFS_IFORK_Q(dp) == 0 ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     dp->i_d.di_anextents == 0)) {
+	if (!xfs_inode_hasattr(dp)) {
 		error = 0;
 	} else if (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) {
 		error = xfs_attr_shortform_list(context);
@@ -632,6 +649,10 @@ xfs_attr_list_int(xfs_attr_list_context_t *context)
 	} else {
 		error = xfs_attr_node_list(context);
 	}
+
+	xfs_iunlock(dp, XFS_ILOCK_SHARED);
+	xfs_attr_trace_l_c("syscall end", context);
+
 	return error;
 }
 
@@ -648,74 +669,50 @@ xfs_attr_list_int(xfs_attr_list_context_t *context)
  */
 /*ARGSUSED*/
 STATIC int
-xfs_attr_put_listent(xfs_attr_list_context_t *context, attrnames_t *namesp,
+xfs_attr_put_listent(xfs_attr_list_context_t *context, int flags,
 		     char *name, int namelen,
 		     int valuelen, char *value)
 {
+	struct attrlist *alist = (struct attrlist *)context->alist;
 	attrlist_ent_t *aep;
 	int arraytop;
 
 	ASSERT(!(context->flags & ATTR_KERNOVAL));
 	ASSERT(context->count >= 0);
 	ASSERT(context->count < (ATTR_MAX_VALUELEN/8));
-	ASSERT(context->firstu >= sizeof(*context->alist));
+	ASSERT(context->firstu >= sizeof(*alist));
 	ASSERT(context->firstu <= context->bufsize);
 
-	arraytop = sizeof(*context->alist) +
-			context->count * sizeof(context->alist->al_offset[0]);
+	/*
+	 * Only list entries in the right namespace.
+	 */
+	if (((context->flags & ATTR_SECURE) == 0) !=
+	    ((flags & XFS_ATTR_SECURE) == 0))
+		return 0;
+	if (((context->flags & ATTR_ROOT) == 0) !=
+	    ((flags & XFS_ATTR_ROOT) == 0))
+		return 0;
+
+	arraytop = sizeof(*alist) +
+			context->count * sizeof(alist->al_offset[0]);
 	context->firstu -= ATTR_ENTSIZE(namelen);
 	if (context->firstu < arraytop) {
 		xfs_attr_trace_l_c("buffer full", context);
-		context->alist->al_more = 1;
+		alist->al_more = 1;
 		context->seen_enough = 1;
 		return 1;
 	}
 
-	aep = (attrlist_ent_t *)&(((char *)context->alist)[ context->firstu ]);
+	aep = (attrlist_ent_t *)&context->alist[context->firstu];
 	aep->a_valuelen = valuelen;
 	memcpy(aep->a_name, name, namelen);
-	aep->a_name[ namelen ] = 0;
-	context->alist->al_offset[ context->count++ ] = context->firstu;
-	context->alist->al_count = context->count;
+	aep->a_name[namelen] = 0;
+	alist->al_offset[context->count++] = context->firstu;
+	alist->al_count = context->count;
 	xfs_attr_trace_l_c("add", context);
 	return 0;
 }
 
-STATIC int
-xfs_attr_kern_list(xfs_attr_list_context_t *context, attrnames_t *namesp,
-		     char *name, int namelen,
-		     int valuelen, char *value)
-{
-	char *offset;
-	int arraytop;
-
-	ASSERT(context->count >= 0);
-
-	arraytop = context->count + namesp->attr_namelen + namelen + 1;
-	if (arraytop > context->firstu) {
-		context->count = -1;	/* insufficient space */
-		return 1;
-	}
-	offset = (char *)context->alist + context->count;
-	strncpy(offset, namesp->attr_name, namesp->attr_namelen);
-	offset += namesp->attr_namelen;
-	strncpy(offset, name, namelen);			/* real name */
-	offset += namelen;
-	*offset = '\0';
-	context->count += namesp->attr_namelen + namelen + 1;
-	return 0;
-}
-
-/*ARGSUSED*/
-STATIC int
-xfs_attr_kern_list_sizes(xfs_attr_list_context_t *context, attrnames_t *namesp,
-		     char *name, int namelen,
-		     int valuelen, char *value)
-{
-	context->count += namesp->attr_namelen + namelen + 1;
-	return 0;
-}
-
 /*
  * Generate a list of extended attribute names and optionally
  * also value lengths.  Positive return value follows the XFS
@@ -732,10 +729,9 @@ xfs_attr_list(
 	attrlist_cursor_kern_t *cursor)
 {
 	xfs_attr_list_context_t context;
+	struct attrlist *alist;
 	int error;
 
-	XFS_STATS_INC(xs_attr_list);
-
 	/*
 	 * Validate the cursor.
 	 */
@@ -756,52 +752,23 @@ xfs_attr_list(
 	/*
 	 * Initialize the output buffer.
 	 */
+	memset(&context, 0, sizeof(context));
 	context.dp = dp;
 	context.cursor = cursor;
-	context.count = 0;
-	context.dupcnt = 0;
 	context.resynch = 1;
 	context.flags = flags;
-	context.seen_enough = 0;
-	context.alist = (attrlist_t *)buffer;
-	context.put_value = 0;
-
-	if (flags & ATTR_KERNAMELS) {
-		context.bufsize = bufsize;
-		context.firstu = context.bufsize;
-		if (flags & ATTR_KERNOVAL)
-			context.put_listent = xfs_attr_kern_list_sizes;
-		else
-			context.put_listent = xfs_attr_kern_list;
-	} else {
-		context.bufsize = (bufsize & ~(sizeof(int)-1));  /* align */
-		context.firstu = context.bufsize;
-		context.alist->al_count = 0;
-		context.alist->al_more = 0;
-		context.alist->al_offset[0] = context.bufsize;
-		context.put_listent = xfs_attr_put_listent;
-	}
-
-	if (XFS_FORCED_SHUTDOWN(dp->i_mount))
-		return EIO;
+	context.alist = buffer;
+	context.bufsize = (bufsize & ~(sizeof(int)-1));  /* align */
+	context.firstu = context.bufsize;
+	context.put_listent = xfs_attr_put_listent;
 
-	xfs_ilock(dp, XFS_ILOCK_SHARED);
-	xfs_attr_trace_l_c("syscall start", &context);
+	alist = (struct attrlist *)context.alist;
+	alist->al_count = 0;
+	alist->al_more = 0;
+	alist->al_offset[0] = context.bufsize;
 
 	error = xfs_attr_list_int(&context);
-
-	xfs_iunlock(dp, XFS_ILOCK_SHARED);
-	xfs_attr_trace_l_c("syscall end", &context);
-
-	if (context.flags & (ATTR_KERNOVAL|ATTR_KERNAMELS)) {
-		/* must return negated buffer size or the error */
-		if (context.count < 0)
-			error = XFS_ERROR(ERANGE);
-		else
-			error = -context.count;
-	} else
-		ASSERT(error >= 0);
-
+	ASSERT(error >= 0);
 	return error;
 }
 
@@ -816,12 +783,10 @@ xfs_attr_inactive(xfs_inode_t *dp)
 	ASSERT(! XFS_NOT_DQATTACHED(mp, dp));
 
 	xfs_ilock(dp, XFS_ILOCK_SHARED);
-	if ((XFS_IFORK_Q(dp) == 0) ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     dp->i_d.di_anextents == 0)) {
+	if (!xfs_inode_hasattr(dp) ||
+	    dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) {
 		xfs_iunlock(dp, XFS_ILOCK_SHARED);
-		return(0);
+		return 0;
 	}
 	xfs_iunlock(dp, XFS_ILOCK_SHARED);
 
@@ -854,10 +819,8 @@ xfs_attr_inactive(xfs_inode_t *dp)
 	/*
 	 * Decide on what work routines to call based on the inode size.
 	 */
-	if ((XFS_IFORK_Q(dp) == 0) ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) ||
-	    (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS &&
-	     dp->i_d.di_anextents == 0)) {
+	if (!xfs_inode_hasattr(dp) ||
+	    dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) {
 		error = 0;
 		goto out;
 	}
@@ -974,7 +937,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 			xfs_da_brelse(args->trans, bp);
 			return(retval);
 		}
-		args->rename = 1;			/* an atomic rename */
+		args->op_flags |= XFS_DA_OP_RENAME;	/* an atomic rename */
 		args->blkno2 = args->blkno;		/* set 2nd entry info*/
 		args->index2 = args->index;
 		args->rmtblkno2 = args->rmtblkno;
@@ -1019,7 +982,8 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 		 * Commit the current trans (including the inode) and start
 		 * a new one.
 		 */
-		if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+		error = xfs_trans_roll(&args->trans, dp);
+		if (error)
 			return (error);
 
 		/*
@@ -1033,7 +997,8 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 	 * Commit the transaction that added the attr name so that
 	 * later routines can manage their own transactions.
 	 */
-	if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+	error = xfs_trans_roll(&args->trans, dp);
+	if (error)
 		return (error);
 
 	/*
@@ -1054,7 +1019,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 	 * so that one disappears and one appears atomically.  Then we
 	 * must remove the "old" attribute/value pair.
 	 */
-	if (args->rename) {
+	if (args->op_flags & XFS_DA_OP_RENAME) {
 		/*
 		 * In a separate transaction, set the incomplete flag on the
 		 * "old" attr and clear the incomplete flag on the "new" attr.
@@ -1122,7 +1087,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args)
 		/*
 		 * Commit the remove and start the next trans in series.
 		 */
-		error = xfs_attr_rolltrans(&args->trans, dp);
+		error = xfs_trans_roll(&args->trans, dp);
 
 	} else if (args->rmtblkno > 0) {
 		/*
@@ -1307,7 +1272,7 @@ restart:
 	} else if (retval == EEXIST) {
 		if (args->flags & ATTR_CREATE)
 			goto out;
-		args->rename = 1;			/* atomic rename op */
+		args->op_flags |= XFS_DA_OP_RENAME;	/* atomic rename op */
 		args->blkno2 = args->blkno;		/* set 2nd entry info*/
 		args->index2 = args->index;
 		args->rmtblkno2 = args->rmtblkno;
@@ -1353,7 +1318,8 @@ restart:
 			 * Commit the node conversion and start the next
 			 * trans in the chain.
 			 */
-			if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+			error = xfs_trans_roll(&args->trans, dp);
+			if (error)
 				goto out;
 
 			goto restart;
@@ -1404,7 +1370,8 @@ restart:
 	 * Commit the leaf addition or btree split and start the next
 	 * trans in the chain.
 	 */
-	if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+	error = xfs_trans_roll(&args->trans, dp);
+	if (error)
 		goto out;
 
 	/*
@@ -1425,7 +1392,7 @@ restart:
 	 * so that one disappears and one appears atomically.  Then we
 	 * must remove the "old" attribute/value pair.
 	 */
-	if (args->rename) {
+	if (args->op_flags & XFS_DA_OP_RENAME) {
 		/*
 		 * In a separate transaction, set the incomplete flag on the
 		 * "old" attr and clear the incomplete flag on the "new" attr.
@@ -1504,7 +1471,8 @@ restart:
 		/*
 		 * Commit and start the next trans in the chain.
 		 */
-		if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+		error = xfs_trans_roll(&args->trans, dp);
+		if (error)
 			goto out;
 
 	} else if (args->rmtblkno > 0) {
@@ -1636,7 +1604,8 @@ xfs_attr_node_removename(xfs_da_args_t *args)
 		/*
 		 * Commit the Btree join operation and start a new trans.
 		 */
-		if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+		error = xfs_trans_roll(&args->trans, dp);
+		if (error)
 			goto out;
 	}
 
@@ -2137,7 +2106,8 @@ xfs_attr_rmtval_set(xfs_da_args_t *args)
 		/*
 		 * Start the next trans in the chain.
 		 */
-		if ((error = xfs_attr_rolltrans(&args->trans, dp)))
+		error = xfs_trans_roll(&args->trans, dp);
+		if (error)
 			return (error);
 	}
 
@@ -2287,7 +2257,8 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args)
 		/*
 		 * Close out trans and start the next one in the chain.
 		 */
-		if ((error = xfs_attr_rolltrans(&args->trans, args->dp)))
+		error = xfs_trans_roll(&args->trans, args->dp);
+		if (error)
 			return (error);
 	}
 	return(0);
@@ -2300,23 +2271,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args)
 void
 xfs_attr_trace_l_c(char *where, struct xfs_attr_list_context *context)
 {
-	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_C, where,
-		(__psunsigned_t)context->dp,
-		(__psunsigned_t)context->cursor->hashval,
-		(__psunsigned_t)context->cursor->blkno,
-		(__psunsigned_t)context->cursor->offset,
-		(__psunsigned_t)context->alist,
-		(__psunsigned_t)context->bufsize,
-		(__psunsigned_t)context->count,
-		(__psunsigned_t)context->firstu,
-		(__psunsigned_t)
-			((context->count > 0) &&
-			!(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL)))
-				? (ATTR_ENTRY(context->alist,
-					      context->count-1)->a_valuelen)
-				: 0,
-		(__psunsigned_t)context->dupcnt,
-		(__psunsigned_t)context->flags,
+	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_C, where, context,
 		(__psunsigned_t)NULL,
 		(__psunsigned_t)NULL,
 		(__psunsigned_t)NULL);
@@ -2329,23 +2284,7 @@ void
 xfs_attr_trace_l_cn(char *where, struct xfs_attr_list_context *context,
 			 struct xfs_da_intnode *node)
 {
-	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CN, where,
-		(__psunsigned_t)context->dp,
-		(__psunsigned_t)context->cursor->hashval,
-		(__psunsigned_t)context->cursor->blkno,
-		(__psunsigned_t)context->cursor->offset,
-		(__psunsigned_t)context->alist,
-		(__psunsigned_t)context->bufsize,
-		(__psunsigned_t)context->count,
-		(__psunsigned_t)context->firstu,
-		(__psunsigned_t)
-			((context->count > 0) &&
-			!(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL)))
-				? (ATTR_ENTRY(context->alist,
-					      context->count-1)->a_valuelen)
-				: 0,
-		(__psunsigned_t)context->dupcnt,
-		(__psunsigned_t)context->flags,
+	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CN, where, context,
 		(__psunsigned_t)be16_to_cpu(node->hdr.count),
 		(__psunsigned_t)be32_to_cpu(node->btree[0].hashval),
 		(__psunsigned_t)be32_to_cpu(node->btree[
@@ -2359,23 +2298,7 @@ void
 xfs_attr_trace_l_cb(char *where, struct xfs_attr_list_context *context,
 			  struct xfs_da_node_entry *btree)
 {
-	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CB, where,
-		(__psunsigned_t)context->dp,
-		(__psunsigned_t)context->cursor->hashval,
-		(__psunsigned_t)context->cursor->blkno,
-		(__psunsigned_t)context->cursor->offset,
-		(__psunsigned_t)context->alist,
-		(__psunsigned_t)context->bufsize,
-		(__psunsigned_t)context->count,
-		(__psunsigned_t)context->firstu,
-		(__psunsigned_t)
-			((context->count > 0) &&
-			!(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL)))
-				? (ATTR_ENTRY(context->alist,
-					      context->count-1)->a_valuelen)
-				: 0,
-		(__psunsigned_t)context->dupcnt,
-		(__psunsigned_t)context->flags,
+	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CB, where, context,
 		(__psunsigned_t)be32_to_cpu(btree->hashval),
 		(__psunsigned_t)be32_to_cpu(btree->before),
 		(__psunsigned_t)NULL);
@@ -2388,23 +2311,7 @@ void
 xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context,
 			      struct xfs_attr_leafblock *leaf)
 {
-	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CL, where,
-		(__psunsigned_t)context->dp,
-		(__psunsigned_t)context->cursor->hashval,
-		(__psunsigned_t)context->cursor->blkno,
-		(__psunsigned_t)context->cursor->offset,
-		(__psunsigned_t)context->alist,
-		(__psunsigned_t)context->bufsize,
-		(__psunsigned_t)context->count,
-		(__psunsigned_t)context->firstu,
-		(__psunsigned_t)
-			((context->count > 0) &&
-			!(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL)))
-				? (ATTR_ENTRY(context->alist,
-					      context->count-1)->a_valuelen)
-				: 0,
-		(__psunsigned_t)context->dupcnt,
-		(__psunsigned_t)context->flags,
+	xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CL, where, context,
 		(__psunsigned_t)be16_to_cpu(leaf->hdr.count),
 		(__psunsigned_t)be32_to_cpu(leaf->entries[0].hashval),
 		(__psunsigned_t)be32_to_cpu(leaf->entries[
@@ -2417,329 +2324,24 @@ xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context,
  */
 void
 xfs_attr_trace_enter(int type, char *where,
-			 __psunsigned_t a2, __psunsigned_t a3,
-			 __psunsigned_t a4, __psunsigned_t a5,
-			 __psunsigned_t a6, __psunsigned_t a7,
-			 __psunsigned_t a8, __psunsigned_t a9,
-			 __psunsigned_t a10, __psunsigned_t a11,
-			 __psunsigned_t a12, __psunsigned_t a13,
-			 __psunsigned_t a14, __psunsigned_t a15)
+			 struct xfs_attr_list_context *context,
+			 __psunsigned_t a13, __psunsigned_t a14,
+			 __psunsigned_t a15)
 {
 	ASSERT(xfs_attr_trace_buf);
 	ktrace_enter(xfs_attr_trace_buf, (void *)((__psunsigned_t)type),
-					 (void *)where,
-					 (void *)a2,  (void *)a3,  (void *)a4,
-					 (void *)a5,  (void *)a6,  (void *)a7,
-					 (void *)a8,  (void *)a9,  (void *)a10,
-					 (void *)a11, (void *)a12, (void *)a13,
-					 (void *)a14, (void *)a15);
+		(void *)((__psunsigned_t)where),
+		(void *)((__psunsigned_t)context->dp),
+		(void *)((__psunsigned_t)context->cursor->hashval),
+		(void *)((__psunsigned_t)context->cursor->blkno),
+		(void *)((__psunsigned_t)context->cursor->offset),
+		(void *)((__psunsigned_t)context->alist),
+		(void *)((__psunsigned_t)context->bufsize),
+		(void *)((__psunsigned_t)context->count),
+		(void *)((__psunsigned_t)context->firstu),
+		NULL,
+		(void *)((__psunsigned_t)context->dupcnt),
+		(void *)((__psunsigned_t)context->flags),
+		(void *)a13, (void *)a14, (void *)a15);
 }
 #endif	/* XFS_ATTR_TRACE */
-
-
-/*========================================================================
- * System (pseudo) namespace attribute interface routines.
- *========================================================================*/
-
-STATIC int
-posix_acl_access_set(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	return xfs_acl_vset(vp, data, size, _ACL_TYPE_ACCESS);
-}
-
-STATIC int
-posix_acl_access_remove(
-	bhv_vnode_t *vp, char *name, int xflags)
-{
-	return xfs_acl_vremove(vp, _ACL_TYPE_ACCESS);
-}
-
-STATIC int
-posix_acl_access_get(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	return xfs_acl_vget(vp, data, size, _ACL_TYPE_ACCESS);
-}
-
-STATIC int
-posix_acl_access_exists(
-	bhv_vnode_t *vp)
-{
-	return xfs_acl_vhasacl_access(vp);
-}
-
-STATIC int
-posix_acl_default_set(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	return xfs_acl_vset(vp, data, size, _ACL_TYPE_DEFAULT);
-}
-
-STATIC int
-posix_acl_default_get(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	return xfs_acl_vget(vp, data, size, _ACL_TYPE_DEFAULT);
-}
-
-STATIC int
-posix_acl_default_remove(
-	bhv_vnode_t *vp, char *name, int xflags)
-{
-	return xfs_acl_vremove(vp, _ACL_TYPE_DEFAULT);
-}
-
-STATIC int
-posix_acl_default_exists(
-	bhv_vnode_t *vp)
-{
-	return xfs_acl_vhasacl_default(vp);
-}
-
-static struct attrnames posix_acl_access = {
-	.attr_name	= "posix_acl_access",
-	.attr_namelen	= sizeof("posix_acl_access") - 1,
-	.attr_get	= posix_acl_access_get,
-	.attr_set	= posix_acl_access_set,
-	.attr_remove	= posix_acl_access_remove,
-	.attr_exists	= posix_acl_access_exists,
-};
-
-static struct attrnames posix_acl_default = {
-	.attr_name	= "posix_acl_default",
-	.attr_namelen	= sizeof("posix_acl_default") - 1,
-	.attr_get	= posix_acl_default_get,
-	.attr_set	= posix_acl_default_set,
-	.attr_remove	= posix_acl_default_remove,
-	.attr_exists	= posix_acl_default_exists,
-};
-
-static struct attrnames *attr_system_names[] =
-	{ &posix_acl_access, &posix_acl_default };
-
-
-/*========================================================================
- * Namespace-prefix-style attribute name interface routines.
- *========================================================================*/
-
-STATIC int
-attr_generic_set(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	return -xfs_attr_set(xfs_vtoi(vp), name, data, size, xflags);
-}
-
-STATIC int
-attr_generic_get(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	int	error, asize = size;
-
-	error = xfs_attr_get(xfs_vtoi(vp), name, data, &asize, xflags);
-	if (!error)
-		return asize;
-	return -error;
-}
-
-STATIC int
-attr_generic_remove(
-	bhv_vnode_t *vp, char *name, int xflags)
-{
-	return -xfs_attr_remove(xfs_vtoi(vp), name, xflags);
-}
-
-STATIC int
-attr_generic_listadd(
-	attrnames_t		*prefix,
-	attrnames_t		*namesp,
-	void			*data,
-	size_t			size,
-	ssize_t			*result)
-{
-	char			*p = data + *result;
-
-	*result += prefix->attr_namelen;
-	*result += namesp->attr_namelen + 1;
-	if (!size)
-		return 0;
-	if (*result > size)
-		return -ERANGE;
-	strcpy(p, prefix->attr_name);
-	p += prefix->attr_namelen;
-	strcpy(p, namesp->attr_name);
-	p += namesp->attr_namelen + 1;
-	return 0;
-}
-
-STATIC int
-attr_system_list(
-	bhv_vnode_t		*vp,
-	void			*data,
-	size_t			size,
-	ssize_t			*result)
-{
-	attrnames_t		*namesp;
-	int			i, error = 0;
-
-	for (i = 0; i < ATTR_SYSCOUNT; i++) {
-		namesp = attr_system_names[i];
-		if (!namesp->attr_exists || !namesp->attr_exists(vp))
-			continue;
-		error = attr_generic_listadd(&attr_system, namesp,
-						data, size, result);
-		if (error)
-			break;
-	}
-	return error;
-}
-
-int
-attr_generic_list(
-	bhv_vnode_t *vp, void *data, size_t size, int xflags, ssize_t *result)
-{
-	attrlist_cursor_kern_t	cursor = { 0 };
-	int			error;
-
-	error = xfs_attr_list(xfs_vtoi(vp), data, size, xflags, &cursor);
-	if (error > 0)
-		return -error;
-	*result = -error;
-	return attr_system_list(vp, data, size, result);
-}
-
-attrnames_t *
-attr_lookup_namespace(
-	char			*name,
-	struct attrnames	**names,
-	int			nnames)
-{
-	int			i;
-
-	for (i = 0; i < nnames; i++)
-		if (!strncmp(name, names[i]->attr_name, names[i]->attr_namelen))
-			return names[i];
-	return NULL;
-}
-
-/*
- * Some checks to prevent people abusing EAs to get over quota:
- * - Don't allow modifying user EAs on devices/symlinks;
- * - Don't allow modifying user EAs if sticky bit set;
- */
-STATIC int
-attr_user_capable(
-	bhv_vnode_t	*vp,
-	cred_t		*cred)
-{
-	struct inode	*inode = vn_to_inode(vp);
-
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		return -EPERM;
-	if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode) &&
-	    !capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	if (S_ISDIR(inode->i_mode) && (inode->i_mode & S_ISVTX) &&
-	    (current_fsuid(cred) != inode->i_uid) && !capable(CAP_FOWNER))
-		return -EPERM;
-	return 0;
-}
-
-STATIC int
-attr_trusted_capable(
-	bhv_vnode_t	*vp,
-	cred_t		*cred)
-{
-	struct inode	*inode = vn_to_inode(vp);
-
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		return -EPERM;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	return 0;
-}
-
-STATIC int
-attr_system_set(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	attrnames_t	*namesp;
-	int		error;
-
-	if (xflags & ATTR_CREATE)
-		return -EINVAL;
-
-	namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	error = namesp->attr_set(vp, name, data, size, xflags);
-	if (!error)
-		error = vn_revalidate(vp);
-	return error;
-}
-
-STATIC int
-attr_system_get(
-	bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
-{
-	attrnames_t	*namesp;
-
-	namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	return namesp->attr_get(vp, name, data, size, xflags);
-}
-
-STATIC int
-attr_system_remove(
-	bhv_vnode_t *vp, char *name, int xflags)
-{
-	attrnames_t	*namesp;
-
-	namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT);
-	if (!namesp)
-		return -EOPNOTSUPP;
-	return namesp->attr_remove(vp, name, xflags);
-}
-
-struct attrnames attr_system = {
-	.attr_name	= "system.",
-	.attr_namelen	= sizeof("system.") - 1,
-	.attr_flag	= ATTR_SYSTEM,
-	.attr_get	= attr_system_get,
-	.attr_set	= attr_system_set,
-	.attr_remove	= attr_system_remove,
-	.attr_capable	= (attrcapable_t)fs_noerr,
-};
-
-struct attrnames attr_trusted = {
-	.attr_name	= "trusted.",
-	.attr_namelen	= sizeof("trusted.") - 1,
-	.attr_flag	= ATTR_ROOT,
-	.attr_get	= attr_generic_get,
-	.attr_set	= attr_generic_set,
-	.attr_remove	= attr_generic_remove,
-	.attr_capable	= attr_trusted_capable,
-};
-
-struct attrnames attr_secure = {
-	.attr_name	= "security.",
-	.attr_namelen	= sizeof("security.") - 1,
-	.attr_flag	= ATTR_SECURE,
-	.attr_get	= attr_generic_get,
-	.attr_set	= attr_generic_set,
-	.attr_remove	= attr_generic_remove,
-	.attr_capable	= (attrcapable_t)fs_noerr,
-};
-
-struct attrnames attr_user = {
-	.attr_name	= "user.",
-	.attr_namelen	= sizeof("user.") - 1,
-	.attr_get	= attr_generic_get,
-	.attr_set	= attr_generic_set,
-	.attr_remove	= attr_generic_remove,
-	.attr_capable	= attr_user_capable,
-};
-
-struct attrnames *attr_namespaces[] =
-	{ &attr_system, &attr_trusted, &attr_secure, &attr_user };
diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h
index 6cfc9384fe3..fb3b2a68b9b 100644
--- a/fs/xfs/xfs_attr.h
+++ b/fs/xfs/xfs_attr.h
@@ -18,9 +18,11 @@
 #ifndef __XFS_ATTR_H__
 #define	__XFS_ATTR_H__
 
+struct xfs_inode;
+struct xfs_da_args;
+struct xfs_attr_list_context;
+
 /*
- * xfs_attr.h
- *
  * Large attribute lists are structured around Btrees where all the data
  * elements are in the leaf nodes.  Attribute names are hashed into an int,
  * then that int is used as the index into the Btree.  Since the hashval
@@ -35,35 +37,6 @@
  * External interfaces
  *========================================================================*/
 
-struct cred;
-struct xfs_attr_list_context;
-
-typedef int (*attrset_t)(bhv_vnode_t *, char *, void *, size_t, int);
-typedef int (*attrget_t)(bhv_vnode_t *, char *, void *, size_t, int);
-typedef int (*attrremove_t)(bhv_vnode_t *, char *, int);
-typedef int (*attrexists_t)(bhv_vnode_t *);
-typedef int (*attrcapable_t)(bhv_vnode_t *, struct cred *);
-
-typedef struct attrnames {
-	char *		attr_name;
-	unsigned int	attr_namelen;
-	unsigned int	attr_flag;
-	attrget_t	attr_get;
-	attrset_t	attr_set;
-	attrremove_t	attr_remove;
-	attrexists_t	attr_exists;
-	attrcapable_t	attr_capable;
-} attrnames_t;
-
-#define ATTR_NAMECOUNT	4
-extern struct attrnames attr_user;
-extern struct attrnames attr_secure;
-extern struct attrnames attr_system;
-extern struct attrnames attr_trusted;
-extern struct attrnames *attr_namespaces[ATTR_NAMECOUNT];
-
-extern attrnames_t *attr_lookup_namespace(char *, attrnames_t **, int);
-extern int attr_generic_list(bhv_vnode_t *, void *, size_t, int, ssize_t *);
 
 #define ATTR_DONTFOLLOW	0x0001	/* -- unused, from IRIX -- */
 #define ATTR_ROOT	0x0002	/* use attrs in root (trusted) namespace */
@@ -71,16 +44,9 @@ extern int attr_generic_list(bhv_vnode_t *, void *, size_t, int, ssize_t *);
 #define ATTR_SECURE	0x0008	/* use attrs in security namespace */
 #define ATTR_CREATE	0x0010	/* pure create: fail if attr already exists */
 #define ATTR_REPLACE	0x0020	/* pure set: fail if attr does not exist */
-#define ATTR_SYSTEM	0x0100	/* use attrs in system (pseudo) namespace */
 
-#define ATTR_KERNACCESS	0x0400	/* [kernel] iaccess, inode held io-locked */
 #define ATTR_KERNOTIME	0x1000	/* [kernel] don't update inode timestamps */
 #define ATTR_KERNOVAL	0x2000	/* [kernel] get attr size only, not value */
-#define ATTR_KERNAMELS	0x4000	/* [kernel] list attr names (simple list) */
-
-#define ATTR_KERNORMALS	0x0800	/* [kernel] normal attr list: user+secure */
-#define ATTR_KERNROOTLS	0x8000	/* [kernel] include root in the attr list */
-#define ATTR_KERNFULLS	(ATTR_KERNORMALS|ATTR_KERNROOTLS)
 
 /*
  * The maximum size (into the kernel or returned from the kernel) of an
@@ -119,22 +85,6 @@ typedef struct attrlist_ent {	/* data from attr_list() */
 	 &((char *)buffer)[ ((attrlist_t *)(buffer))->al_offset[index] ])
 
 /*
- * Multi-attribute operation vector.
- */
-typedef struct attr_multiop {
-	int	am_opcode;	/* operation to perform (ATTR_OP_GET, etc.) */
-	int	am_error;	/* [out arg] result of this sub-op (an errno) */
-	char	*am_attrname;	/* attribute name to work with */
-	char	*am_attrvalue;	/* [in/out arg] attribute value (raw bytes) */
-	int	am_length;	/* [in/out arg] length of value */
-	int	am_flags;	/* bitwise OR of attr API flags defined above */
-} attr_multiop_t;
-
-#define ATTR_OP_GET	1	/* return the indicated attr's value */
-#define ATTR_OP_SET	2	/* set/create the indicated attr/value pair */
-#define ATTR_OP_REMOVE	3	/* remove the indicated attr */
-
-/*
  * Kernel-internal version of the attrlist cursor.
  */
 typedef struct attrlist_cursor_kern {
@@ -148,20 +98,41 @@ typedef struct attrlist_cursor_kern {
 
 
 /*========================================================================
- * Function prototypes for the kernel.
+ * Structure used to pass context around among the routines.
  *========================================================================*/
 
-struct xfs_inode;
-struct attrlist_cursor_kern;
-struct xfs_da_args;
+
+typedef int (*put_listent_func_t)(struct xfs_attr_list_context *, int,
+				      char *, int, int, char *);
+
+typedef struct xfs_attr_list_context {
+	struct xfs_inode		*dp;		/* inode */
+	struct attrlist_cursor_kern	*cursor;	/* position in list */
+	char				*alist;		/* output buffer */
+	int				seen_enough;	/* T/F: seen enough of list? */
+	ssize_t				count;		/* num used entries */
+	int				dupcnt;		/* count dup hashvals seen */
+	int				bufsize;	/* total buffer size */
+	int				firstu;		/* first used byte in buffer */
+	int				flags;		/* from VOP call */
+	int				resynch;	/* T/F: resynch with cursor */
+	int				put_value;	/* T/F: need value for listent */
+	put_listent_func_t		put_listent;	/* list output fmt function */
+	int				index;		/* index into output buffer */
+} xfs_attr_list_context_t;
+
+
+/*========================================================================
+ * Function prototypes for the kernel.
+ *========================================================================*/
 
 /*
  * Overall external interface routines.
  */
+int xfs_attr_calc_size(struct xfs_inode *, int, int, int *);
 int xfs_attr_inactive(struct xfs_inode *dp);
-
-int xfs_attr_shortform_getvalue(struct xfs_da_args *);
 int xfs_attr_fetch(struct xfs_inode *, struct xfs_name *, char *, int *, int);
 int xfs_attr_rmtval_get(struct xfs_da_args *args);
+int xfs_attr_list_int(struct xfs_attr_list_context *);
 
 #endif	/* __XFS_ATTR_H__ */
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index 303d41e4217..79da6b2ea99 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -94,13 +94,6 @@ STATIC int xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index);
  * Namespace helper routines
  *========================================================================*/
 
-STATIC_INLINE attrnames_t *
-xfs_attr_flags_namesp(int flags)
-{
-	return ((flags & XFS_ATTR_SECURE) ? &attr_secure:
-		  ((flags & XFS_ATTR_ROOT) ? &attr_trusted : &attr_user));
-}
-
 /*
  * If namespace bits don't match return 0.
  * If all match then return 1.
@@ -111,25 +104,6 @@ xfs_attr_namesp_match(int arg_flags, int ondisk_flags)
 	return XFS_ATTR_NSP_ONDISK(ondisk_flags) == XFS_ATTR_NSP_ARGS_TO_ONDISK(arg_flags);
 }
 
-/*
- * If namespace bits don't match and we don't have an override for it
- * then return 0.
- * If all match or are overridable then return 1.
- */
-STATIC_INLINE int
-xfs_attr_namesp_match_overrides(int arg_flags, int ondisk_flags)
-{
-	if (((arg_flags & ATTR_SECURE) == 0) !=
-	    ((ondisk_flags & XFS_ATTR_SECURE) == 0) &&
-	    !(arg_flags & ATTR_KERNORMALS))
-		return 0;
-	if (((arg_flags & ATTR_ROOT) == 0) !=
-	    ((ondisk_flags & XFS_ATTR_ROOT) == 0) &&
-	    !(arg_flags & ATTR_KERNROOTLS))
-		return 0;
-	return 1;
-}
-
 
 /*========================================================================
  * External routines when attribute fork size < XFS_LITINO(mp).
@@ -369,9 +343,10 @@ xfs_attr_shortform_remove(xfs_da_args_t *args)
 	 * Fix up the start offset of the attribute fork
 	 */
 	totsize -= size;
-	if (totsize == sizeof(xfs_attr_sf_hdr_t) && !args->addname &&
-	    (mp->m_flags & XFS_MOUNT_ATTR2) && 
-	    (dp->i_d.di_format != XFS_DINODE_FMT_BTREE)) {
+	if (totsize == sizeof(xfs_attr_sf_hdr_t) &&
+				!(args->op_flags & XFS_DA_OP_ADDNAME) &&
+				(mp->m_flags & XFS_MOUNT_ATTR2) &&
+				(dp->i_d.di_format != XFS_DINODE_FMT_BTREE)) {
 		/*
 		 * Last attribute now removed, revert to original
 		 * inode format making all literal area available
@@ -389,9 +364,10 @@ xfs_attr_shortform_remove(xfs_da_args_t *args)
 		xfs_idata_realloc(dp, -size, XFS_ATTR_FORK);
 		dp->i_d.di_forkoff = xfs_attr_shortform_bytesfit(dp, totsize);
 		ASSERT(dp->i_d.di_forkoff);
-		ASSERT(totsize > sizeof(xfs_attr_sf_hdr_t) || args->addname ||
-			!(mp->m_flags & XFS_MOUNT_ATTR2) ||
-			dp->i_d.di_format == XFS_DINODE_FMT_BTREE);
+		ASSERT(totsize > sizeof(xfs_attr_sf_hdr_t) ||
+				(args->op_flags & XFS_DA_OP_ADDNAME) ||
+				!(mp->m_flags & XFS_MOUNT_ATTR2) ||
+				dp->i_d.di_format == XFS_DINODE_FMT_BTREE);
 		dp->i_afp->if_ext_max =
 			XFS_IFORK_ASIZE(dp) / (uint)sizeof(xfs_bmbt_rec_t);
 		dp->i_df.if_ext_max =
@@ -531,7 +507,7 @@ xfs_attr_shortform_to_leaf(xfs_da_args_t *args)
 	nargs.total = args->total;
 	nargs.whichfork = XFS_ATTR_FORK;
 	nargs.trans = args->trans;
-	nargs.oknoent = 1;
+	nargs.op_flags = XFS_DA_OP_OKNOENT;
 
 	sfe = &sf->list[0];
 	for (i = 0; i < sf->hdr.count; i++) {
@@ -555,7 +531,7 @@ xfs_attr_shortform_to_leaf(xfs_da_args_t *args)
 out:
 	if(bp)
 		xfs_da_buf_done(bp);
-	kmem_free(tmpbuffer, size);
+	kmem_free(tmpbuffer);
 	return(error);
 }
 
@@ -624,15 +600,8 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context)
 	    (XFS_ISRESET_CURSOR(cursor) &&
              (dp->i_afp->if_bytes + sf->hdr.count * 16) < context->bufsize)) {
 		for (i = 0, sfe = &sf->list[0]; i < sf->hdr.count; i++) {
-			attrnames_t	*namesp;
-
-			if (!xfs_attr_namesp_match_overrides(context->flags, sfe->flags)) {
-				sfe = XFS_ATTR_SF_NEXTENTRY(sfe);
-				continue;
-			}
-			namesp = xfs_attr_flags_namesp(sfe->flags);
 			error = context->put_listent(context,
-					   namesp,
+					   sfe->flags,
 					   (char *)sfe->nameval,
 					   (int)sfe->namelen,
 					   (int)sfe->valuelen,
@@ -676,13 +645,10 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context)
 					     XFS_ERRLEVEL_LOW,
 					     context->dp->i_mount, sfe);
 			xfs_attr_trace_l_c("sf corrupted", context);
-			kmem_free(sbuf, sbsize);
+			kmem_free(sbuf);
 			return XFS_ERROR(EFSCORRUPTED);
 		}
-		if (!xfs_attr_namesp_match_overrides(context->flags, sfe->flags)) {
-			sfe = XFS_ATTR_SF_NEXTENTRY(sfe);
-			continue;
-		}
+
 		sbp->entno = i;
 		sbp->hash = xfs_da_hashname((char *)sfe->nameval, sfe->namelen);
 		sbp->name = (char *)sfe->nameval;
@@ -717,7 +683,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context)
 		}
 	}
 	if (i == nsbuf) {
-		kmem_free(sbuf, sbsize);
+		kmem_free(sbuf);
 		xfs_attr_trace_l_c("blk end", context);
 		return(0);
 	}
@@ -726,16 +692,12 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context)
 	 * Loop putting entries into the user buffer.
 	 */
 	for ( ; i < nsbuf; i++, sbp++) {
-		attrnames_t	*namesp;
-
-		namesp = xfs_attr_flags_namesp(sbp->flags);
-
 		if (cursor->hashval != sbp->hash) {
 			cursor->hashval = sbp->hash;
 			cursor->offset = 0;
 		}
 		error = context->put_listent(context,
-					namesp,
+					sbp->flags,
 					sbp->name,
 					sbp->namelen,
 					sbp->valuelen,
@@ -747,7 +709,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context)
 		cursor->offset++;
 	}
 
-	kmem_free(sbuf, sbsize);
+	kmem_free(sbuf);
 	xfs_attr_trace_l_c("sf E-O-F", context);
 	return(0);
 }
@@ -853,7 +815,7 @@ xfs_attr_leaf_to_shortform(xfs_dabuf_t *bp, xfs_da_args_t *args, int forkoff)
 	nargs.total = args->total;
 	nargs.whichfork = XFS_ATTR_FORK;
 	nargs.trans = args->trans;
-	nargs.oknoent = 1;
+	nargs.op_flags = XFS_DA_OP_OKNOENT;
 	entry = &leaf->entries[0];
 	for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) {
 		if (entry->flags & XFS_ATTR_INCOMPLETE)
@@ -873,7 +835,7 @@ xfs_attr_leaf_to_shortform(xfs_dabuf_t *bp, xfs_da_args_t *args, int forkoff)
 	error = 0;
 
 out:
-	kmem_free(tmpbuffer, XFS_LBSIZE(dp->i_mount));
+	kmem_free(tmpbuffer);
 	return(error);
 }
 
@@ -1155,7 +1117,7 @@ xfs_attr_leaf_add_work(xfs_dabuf_t *bp, xfs_da_args_t *args, int mapindex)
 	entry->hashval = cpu_to_be32(args->hashval);
 	entry->flags = tmp ? XFS_ATTR_LOCAL : 0;
 	entry->flags |= XFS_ATTR_NSP_ARGS_TO_ONDISK(args->flags);
-	if (args->rename) {
+	if (args->op_flags & XFS_DA_OP_RENAME) {
 		entry->flags |= XFS_ATTR_INCOMPLETE;
 		if ((args->blkno2 == args->blkno) &&
 		    (args->index2 <= args->index)) {
@@ -1271,7 +1233,7 @@ xfs_attr_leaf_compact(xfs_trans_t *trans, xfs_dabuf_t *bp)
 				be16_to_cpu(hdr_s->count), mp);
 	xfs_da_log_buf(trans, bp, 0, XFS_LBSIZE(mp) - 1);
 
-	kmem_free(tmpbuffer, XFS_LBSIZE(mp));
+	kmem_free(tmpbuffer);
 }
 
 /*
@@ -1921,7 +1883,7 @@ xfs_attr_leaf_unbalance(xfs_da_state_t *state, xfs_da_state_blk_t *drop_blk,
 				be16_to_cpu(drop_hdr->count), mp);
 		}
 		memcpy((char *)save_leaf, (char *)tmp_leaf, state->blocksize);
-		kmem_free(tmpbuffer, state->blocksize);
+		kmem_free(tmpbuffer);
 	}
 
 	xfs_da_log_buf(state->args->trans, save_blk->bp, 0,
@@ -2400,8 +2362,6 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context)
 	 */
 	retval = 0;
 	for (  ; (i < be16_to_cpu(leaf->hdr.count)); entry++, i++) {
-		attrnames_t *namesp;
-
 		if (be32_to_cpu(entry->hashval) != cursor->hashval) {
 			cursor->hashval = be32_to_cpu(entry->hashval);
 			cursor->offset = 0;
@@ -2409,17 +2369,13 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context)
 
 		if (entry->flags & XFS_ATTR_INCOMPLETE)
 			continue;		/* skip incomplete entries */
-		if (!xfs_attr_namesp_match_overrides(context->flags, entry->flags))
-			continue;
-
-		namesp = xfs_attr_flags_namesp(entry->flags);
 
 		if (entry->flags & XFS_ATTR_LOCAL) {
 			xfs_attr_leaf_name_local_t *name_loc =
 				XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
 
 			retval = context->put_listent(context,
-						namesp,
+						entry->flags,
 						(char *)name_loc->nameval,
 						(int)name_loc->namelen,
 						be16_to_cpu(name_loc->valuelen),
@@ -2446,16 +2402,15 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context)
 				if (retval)
 					return retval;
 				retval = context->put_listent(context,
-						namesp,
+						entry->flags,
 						(char *)name_rmt->name,
 						(int)name_rmt->namelen,
 						valuelen,
 						(char*)args.value);
-				kmem_free(args.value, valuelen);
-			}
-			else {
+				kmem_free(args.value);
+			} else {
 				retval = context->put_listent(context,
-						namesp,
+						entry->flags,
 						(char *)name_rmt->name,
 						(int)name_rmt->namelen,
 						valuelen,
@@ -2543,9 +2498,7 @@ xfs_attr_leaf_clearflag(xfs_da_args_t *args)
 	/*
 	 * Commit the flag value change and start the next trans in series.
 	 */
-	error = xfs_attr_rolltrans(&args->trans, args->dp);
-
-	return(error);
+	return xfs_trans_roll(&args->trans, args->dp);
 }
 
 /*
@@ -2592,9 +2545,7 @@ xfs_attr_leaf_setflag(xfs_da_args_t *args)
 	/*
 	 * Commit the flag value change and start the next trans in series.
 	 */
-	error = xfs_attr_rolltrans(&args->trans, args->dp);
-
-	return(error);
+	return xfs_trans_roll(&args->trans, args->dp);
 }
 
 /*
@@ -2710,7 +2661,7 @@ xfs_attr_leaf_flipflags(xfs_da_args_t *args)
 	/*
 	 * Commit the flag value change and start the next trans in series.
 	 */
-	error = xfs_attr_rolltrans(&args->trans, args->dp);
+	error = xfs_trans_roll(&args->trans, args->dp);
 
 	return(error);
 }
@@ -2768,7 +2719,7 @@ xfs_attr_root_inactive(xfs_trans_t **trans, xfs_inode_t *dp)
 	/*
 	 * Commit the invalidate and start the next transaction.
 	 */
-	error = xfs_attr_rolltrans(trans, dp);
+	error = xfs_trans_roll(trans, dp);
 
 	return (error);
 }
@@ -2870,7 +2821,8 @@ xfs_attr_node_inactive(xfs_trans_t **trans, xfs_inode_t *dp, xfs_dabuf_t *bp,
 		/*
 		 * Atomically commit the whole invalidate stuff.
 		 */
-		if ((error = xfs_attr_rolltrans(trans, dp)))
+		error = xfs_trans_roll(trans, dp);
+		if (error)
 			return (error);
 	}
 
@@ -2954,7 +2906,7 @@ xfs_attr_leaf_inactive(xfs_trans_t **trans, xfs_inode_t *dp, xfs_dabuf_t *bp)
 			error = tmp;	/* save only the 1st errno */
 	}
 
-	kmem_free((xfs_caddr_t)list, size);
+	kmem_free((xfs_caddr_t)list);
 	return(error);
 }
 
@@ -3009,7 +2961,8 @@ xfs_attr_leaf_freextent(xfs_trans_t **trans, xfs_inode_t *dp,
 			/*
 			 * Roll to next transaction.
 			 */
-			if ((error = xfs_attr_rolltrans(trans, dp)))
+			error = xfs_trans_roll(trans, dp);
+			if (error)
 				return (error);
 		}
 
@@ -3019,60 +2972,3 @@ xfs_attr_leaf_freextent(xfs_trans_t **trans, xfs_inode_t *dp,
 
 	return(0);
 }
-
-
-/*
- * Roll from one trans in the sequence of PERMANENT transactions to the next.
- */
-int
-xfs_attr_rolltrans(xfs_trans_t **transp, xfs_inode_t *dp)
-{
-	xfs_trans_t *trans;
-	unsigned int logres, count;
-	int	error;
-
-	/*
-	 * Ensure that the inode is always logged.
-	 */
-	trans = *transp;
-	xfs_trans_log_inode(trans, dp, XFS_ILOG_CORE);
-
-	/*
-	 * Copy the critical parameters from one trans to the next.
-	 */
-	logres = trans->t_log_res;
-	count = trans->t_log_count;
-	*transp = xfs_trans_dup(trans);
-
-	/*
-	 * Commit the current transaction.
-	 * If this commit failed, then it'd just unlock those items that
-	 * are not marked ihold. That also means that a filesystem shutdown
-	 * is in progress. The caller takes the responsibility to cancel
-	 * the duplicate transaction that gets returned.
-	 */
-	if ((error = xfs_trans_commit(trans, 0)))
-		return (error);
-
-	trans = *transp;
-
-	/*
-	 * Reserve space in the log for th next transaction.
-	 * This also pushes items in the "AIL", the list of logged items,
-	 * out to disk if they are taking up space at the tail of the log
-	 * that we want to use.  This requires that either nothing be locked
-	 * across this call, or that anything that is locked be logged in
-	 * the prior and the next transactions.
-	 */
-	error = xfs_trans_reserve(trans, 0, logres, 0,
-				  XFS_TRANS_PERM_LOG_RES, count);
-	/*
-	 *  Ensure that the inode is in the new transaction and locked.
-	 */
-	if (!error) {
-		xfs_trans_ijoin(trans, dp, XFS_ILOCK_EXCL);
-		xfs_trans_ihold(trans, dp);
-	}
-	return (error);
-
-}
diff --git a/fs/xfs/xfs_attr_leaf.h b/fs/xfs/xfs_attr_leaf.h
index 040f732ce1e..83e9af417ca 100644
--- a/fs/xfs/xfs_attr_leaf.h
+++ b/fs/xfs/xfs_attr_leaf.h
@@ -30,7 +30,7 @@
 
 struct attrlist;
 struct attrlist_cursor_kern;
-struct attrnames;
+struct xfs_attr_list_context;
 struct xfs_dabuf;
 struct xfs_da_args;
 struct xfs_da_state;
@@ -204,33 +204,6 @@ static inline int xfs_attr_leaf_entsize_local_max(int bsize)
 	return (((bsize) >> 1) + ((bsize) >> 2));
 }
 
-
-/*========================================================================
- * Structure used to pass context around among the routines.
- *========================================================================*/
-
-
-struct xfs_attr_list_context;
-
-typedef int (*put_listent_func_t)(struct xfs_attr_list_context *, struct attrnames *,
-				      char *, int, int, char *);
-
-typedef struct xfs_attr_list_context {
-	struct xfs_inode		*dp;		/* inode */
-	struct attrlist_cursor_kern	*cursor;	/* position in list */
-	struct attrlist			*alist;		/* output buffer */
-	int				seen_enough;	/* T/F: seen enough of list? */
-	int				count;		/* num used entries */
-	int				dupcnt;		/* count dup hashvals seen */
-	int				bufsize;	/* total buffer size */
-	int				firstu;		/* first used byte in buffer */
-	int				flags;		/* from VOP call */
-	int				resynch;	/* T/F: resynch with cursor */
-	int				put_value;	/* T/F: need value for listent */
-	put_listent_func_t		put_listent;	/* list output fmt function */
-	int				index;		/* index into output buffer */
-} xfs_attr_list_context_t;
-
 /*
  * Used to keep a list of "remote value" extents when unlinking an inode.
  */
@@ -301,6 +274,4 @@ int	xfs_attr_leaf_order(struct xfs_dabuf *leaf1_bp,
 				   struct xfs_dabuf *leaf2_bp);
 int	xfs_attr_leaf_newentsize(int namelen, int valuelen, int blocksize,
 					int *local);
-int	xfs_attr_rolltrans(struct xfs_trans **transp, struct xfs_inode *dp);
-
 #endif	/* __XFS_ATTR_LEAF_H__ */
diff --git a/fs/xfs/xfs_attr_sf.h b/fs/xfs/xfs_attr_sf.h
index f67f917803b..ea22839caed 100644
--- a/fs/xfs/xfs_attr_sf.h
+++ b/fs/xfs/xfs_attr_sf.h
@@ -97,13 +97,9 @@ void xfs_attr_trace_l_cb(char *where, struct xfs_attr_list_context *context,
 void xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context,
 			      struct xfs_attr_leafblock *leaf);
 void xfs_attr_trace_enter(int type, char *where,
-			     __psunsigned_t a2, __psunsigned_t a3,
-			     __psunsigned_t a4, __psunsigned_t a5,
-			     __psunsigned_t a6, __psunsigned_t a7,
-			     __psunsigned_t a8, __psunsigned_t a9,
-			     __psunsigned_t a10, __psunsigned_t a11,
-			     __psunsigned_t a12, __psunsigned_t a13,
-			     __psunsigned_t a14, __psunsigned_t a15);
+			     struct xfs_attr_list_context *context,
+			     __psunsigned_t a13, __psunsigned_t a14,
+			     __psunsigned_t a15);
 #else
 #define	xfs_attr_trace_l_c(w,c)
 #define	xfs_attr_trace_l_cn(w,c,n)
diff --git a/fs/xfs/xfs_bit.c b/fs/xfs/xfs_bit.c
index fab0b6d5a41..48228848f5a 100644
--- a/fs/xfs/xfs_bit.c
+++ b/fs/xfs/xfs_bit.c
@@ -25,109 +25,6 @@
  * XFS bit manipulation routines, used in non-realtime code.
  */
 
-#ifndef HAVE_ARCH_HIGHBIT
-/*
- * Index of high bit number in byte, -1 for none set, 0..7 otherwise.
- */
-static const char xfs_highbit[256] = {
-       -1, 0, 1, 1, 2, 2, 2, 2,			/* 00 .. 07 */
-	3, 3, 3, 3, 3, 3, 3, 3,			/* 08 .. 0f */
-	4, 4, 4, 4, 4, 4, 4, 4,			/* 10 .. 17 */
-	4, 4, 4, 4, 4, 4, 4, 4,			/* 18 .. 1f */
-	5, 5, 5, 5, 5, 5, 5, 5,			/* 20 .. 27 */
-	5, 5, 5, 5, 5, 5, 5, 5,			/* 28 .. 2f */
-	5, 5, 5, 5, 5, 5, 5, 5,			/* 30 .. 37 */
-	5, 5, 5, 5, 5, 5, 5, 5,			/* 38 .. 3f */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 40 .. 47 */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 48 .. 4f */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 50 .. 57 */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 58 .. 5f */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 60 .. 67 */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 68 .. 6f */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 70 .. 77 */
-	6, 6, 6, 6, 6, 6, 6, 6,			/* 78 .. 7f */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* 80 .. 87 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* 88 .. 8f */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* 90 .. 97 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* 98 .. 9f */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* a0 .. a7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* a8 .. af */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* b0 .. b7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* b8 .. bf */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* c0 .. c7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* c8 .. cf */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* d0 .. d7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* d8 .. df */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* e0 .. e7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* e8 .. ef */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* f0 .. f7 */
-	7, 7, 7, 7, 7, 7, 7, 7,			/* f8 .. ff */
-};
-#endif
-
-/*
- * xfs_highbit32: get high bit set out of 32-bit argument, -1 if none set.
- */
-inline int
-xfs_highbit32(
-	__uint32_t	v)
-{
-#ifdef HAVE_ARCH_HIGHBIT
-	return highbit32(v);
-#else
-	int		i;
-
-	if (v & 0xffff0000)
-		if (v & 0xff000000)
-			i = 24;
-		else
-			i = 16;
-	else if (v & 0x0000ffff)
-		if (v & 0x0000ff00)
-			i = 8;
-		else
-			i = 0;
-	else
-		return -1;
-	return i + xfs_highbit[(v >> i) & 0xff];
-#endif
-}
-
-/*
- * xfs_lowbit64: get low bit set out of 64-bit argument, -1 if none set.
- */
-int
-xfs_lowbit64(
-	__uint64_t	v)
-{
-	__uint32_t	w = (__uint32_t)v;
-	int		n = 0;
-
-	if (w) {	/* lower bits */
-		n = ffs(w);
-	} else {	/* upper bits */
-		w = (__uint32_t)(v >> 32);
-		if (w && (n = ffs(w)))
-			n += 32;
-	}
-	return n - 1;
-}
-
-/*
- * xfs_highbit64: get high bit set out of 64-bit argument, -1 if none set.
- */
-int
-xfs_highbit64(
-	__uint64_t	v)
-{
-	__uint32_t	h = (__uint32_t)(v >> 32);
-
-	if (h)
-		return xfs_highbit32(h) + 32;
-	return xfs_highbit32((__uint32_t)v);
-}
-
-
 /*
  * Return whether bitmap is empty.
  * Size is number of words in the bitmap, which is padded to word boundary
diff --git a/fs/xfs/xfs_bit.h b/fs/xfs/xfs_bit.h
index 082641a9782..8e0e463dae2 100644
--- a/fs/xfs/xfs_bit.h
+++ b/fs/xfs/xfs_bit.h
@@ -47,13 +47,39 @@ static inline __uint64_t xfs_mask64lo(int n)
 }
 
 /* Get high bit set out of 32-bit argument, -1 if none set */
-extern int xfs_highbit32(__uint32_t v);
+static inline int xfs_highbit32(__uint32_t v)
+{
+	return fls(v) - 1;
+}
+
+/* Get high bit set out of 64-bit argument, -1 if none set */
+static inline int xfs_highbit64(__uint64_t v)
+{
+	return fls64(v) - 1;
+}
+
+/* Get low bit set out of 32-bit argument, -1 if none set */
+static inline int xfs_lowbit32(__uint32_t v)
+{
+	unsigned long	t = v;
+	return (v) ? find_first_bit(&t, 32) : -1;
+}
 
 /* Get low bit set out of 64-bit argument, -1 if none set */
-extern int xfs_lowbit64(__uint64_t v);
+static inline int xfs_lowbit64(__uint64_t v)
+{
+	__uint32_t	w = (__uint32_t)v;
+	int		n = 0;
 
-/* Get high bit set out of 64-bit argument, -1 if none set */
-extern int xfs_highbit64(__uint64_t);
+	if (w) {	/* lower bits */
+		n = ffs(w);
+	} else {	/* upper bits */
+		w = (__uint32_t)(v >> 32);
+		if (w && (n = ffs(w)))
+		n += 32;
+	}
+	return n - 1;
+}
 
 /* Return whether bitmap is empty (1 == empty) */
 extern int xfs_bitmap_empty(uint *map, uint size);
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 53c259f5a5a..a1aab9275d5 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -384,14 +384,14 @@ xfs_bmap_count_tree(
 	int             levelin,
 	int		*count);
 
-STATIC int
+STATIC void
 xfs_bmap_count_leaves(
 	xfs_ifork_t		*ifp,
 	xfs_extnum_t		idx,
 	int			numrecs,
 	int			*count);
 
-STATIC int
+STATIC void
 xfs_bmap_disk_count_leaves(
 	xfs_extnum_t		idx,
 	xfs_bmbt_block_t	*block,
@@ -428,7 +428,8 @@ xfs_bmap_add_attrfork_btree(
 		cur->bc_private.b.firstblock = *firstblock;
 		if ((error = xfs_bmbt_lookup_ge(cur, 0, 0, 0, &stat)))
 			goto error0;
-		ASSERT(stat == 1);	/* must be at least one entry */
+		/* must be at least one entry */
+		XFS_WANT_CORRUPTED_GOTO(stat == 1, error0);
 		if ((error = xfs_bmbt_newroot(cur, flags, &stat)))
 			goto error0;
 		if (stat == 0) {
@@ -816,13 +817,13 @@ xfs_bmap_add_extent_delay_real(
 					RIGHT.br_startblock,
 					RIGHT.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
 					LEFT.br_startblock,
 					LEFT.br_blockcount +
@@ -860,7 +861,7 @@ xfs_bmap_add_extent_delay_real(
 					LEFT.br_startblock, LEFT.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
 					LEFT.br_startblock,
 					LEFT.br_blockcount +
@@ -895,7 +896,7 @@ xfs_bmap_add_extent_delay_real(
 					RIGHT.br_startblock,
 					RIGHT.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, PREV.br_startoff,
 					new->br_startblock,
 					PREV.br_blockcount +
@@ -928,11 +929,11 @@ xfs_bmap_add_extent_delay_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = XFS_EXT_NORM;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		*dnew = 0;
 		/* DELTA: The in-core extent described by new changed type. */
@@ -963,7 +964,7 @@ xfs_bmap_add_extent_delay_real(
 					LEFT.br_startblock, LEFT.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
 					LEFT.br_startblock,
 					LEFT.br_blockcount +
@@ -1004,11 +1005,11 @@ xfs_bmap_add_extent_delay_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = XFS_EXT_NORM;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
 		    ip->i_d.di_nextents > ip->i_df.if_ext_max) {
@@ -1054,7 +1055,7 @@ xfs_bmap_add_extent_delay_real(
 					RIGHT.br_startblock,
 					RIGHT.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, new->br_startoff,
 					new->br_startblock,
 					new->br_blockcount +
@@ -1094,11 +1095,11 @@ xfs_bmap_add_extent_delay_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = XFS_EXT_NORM;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
 		    ip->i_d.di_nextents > ip->i_df.if_ext_max) {
@@ -1149,11 +1150,11 @@ xfs_bmap_add_extent_delay_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = XFS_EXT_NORM;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
 		    ip->i_d.di_nextents > ip->i_df.if_ext_max) {
@@ -1377,19 +1378,19 @@ xfs_bmap_add_extent_unwritten_real(
 					RIGHT.br_startblock,
 					RIGHT.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
 				LEFT.br_startblock,
 				LEFT.br_blockcount + PREV.br_blockcount +
@@ -1426,13 +1427,13 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock, PREV.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
 				LEFT.br_startblock,
 				LEFT.br_blockcount + PREV.br_blockcount,
@@ -1469,13 +1470,13 @@ xfs_bmap_add_extent_unwritten_real(
 					RIGHT.br_startblock,
 					RIGHT.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, new->br_startoff,
 				new->br_startblock,
 				new->br_blockcount + RIGHT.br_blockcount,
@@ -1508,7 +1509,7 @@ xfs_bmap_add_extent_unwritten_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, new->br_startoff,
 				new->br_startblock, new->br_blockcount,
 				newext)))
@@ -1549,7 +1550,7 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock, PREV.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur,
 				PREV.br_startoff + new->br_blockcount,
 				PREV.br_startblock + new->br_blockcount,
@@ -1596,7 +1597,7 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock, PREV.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur,
 				PREV.br_startoff + new->br_blockcount,
 				PREV.br_startblock + new->br_blockcount,
@@ -1606,7 +1607,7 @@ xfs_bmap_add_extent_unwritten_real(
 			cur->bc_rec.b = *new;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		/* DELTA: One in-core extent is split in two. */
 		temp = PREV.br_startoff;
@@ -1640,7 +1641,7 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock,
 					PREV.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, PREV.br_startoff,
 				PREV.br_startblock,
 				PREV.br_blockcount - new->br_blockcount,
@@ -1682,7 +1683,7 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock, PREV.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, PREV.br_startoff,
 				PREV.br_startblock,
 				PREV.br_blockcount - new->br_blockcount,
@@ -1692,11 +1693,11 @@ xfs_bmap_add_extent_unwritten_real(
 					new->br_startblock, new->br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = XFS_EXT_NORM;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		/* DELTA: One in-core extent is split in two. */
 		temp = PREV.br_startoff;
@@ -1732,27 +1733,34 @@ xfs_bmap_add_extent_unwritten_real(
 					PREV.br_startblock, PREV.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			/* new right extent - oldext */
 			if ((error = xfs_bmbt_update(cur, r[1].br_startoff,
 				r[1].br_startblock, r[1].br_blockcount,
 				r[1].br_state)))
 				goto done;
 			/* new left extent - oldext */
-			PREV.br_blockcount =
-				new->br_startoff - PREV.br_startoff;
 			cur->bc_rec.b = PREV;
+			cur->bc_rec.b.br_blockcount =
+				new->br_startoff - PREV.br_startoff;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
-			if ((error = xfs_bmbt_increment(cur, 0, &i)))
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
+			/*
+			 * Reset the cursor to the position of the new extent
+			 * we are about to insert as we can't trust it after
+			 * the previous insert.
+			 */
+			if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff,
+					new->br_startblock, new->br_blockcount,
+					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			/* new middle extent - newext */
-			cur->bc_rec.b = *new;
+			cur->bc_rec.b.br_state = new->br_state;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		/* DELTA: One in-core extent is split in three. */
 		temp = PREV.br_startoff;
@@ -2097,13 +2105,13 @@ xfs_bmap_add_extent_hole_real(
 					right.br_startblock,
 					right.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_delete(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_decrement(cur, 0, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, left.br_startoff,
 					left.br_startblock,
 					left.br_blockcount +
@@ -2139,7 +2147,7 @@ xfs_bmap_add_extent_hole_real(
 					left.br_startblock,
 					left.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, left.br_startoff,
 					left.br_startblock,
 					left.br_blockcount +
@@ -2174,7 +2182,7 @@ xfs_bmap_add_extent_hole_real(
 					right.br_startblock,
 					right.br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			if ((error = xfs_bmbt_update(cur, new->br_startoff,
 					new->br_startblock,
 					new->br_blockcount +
@@ -2208,11 +2216,11 @@ xfs_bmap_add_extent_hole_real(
 					new->br_startblock,
 					new->br_blockcount, &i)))
 				goto done;
-			ASSERT(i == 0);
+			XFS_WANT_CORRUPTED_GOTO(i == 0, done);
 			cur->bc_rec.b.br_state = new->br_state;
 			if ((error = xfs_bmbt_insert(cur, &i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		/* DELTA: A new extent was added in a hole. */
 		temp = new->br_startoff;
@@ -3131,7 +3139,7 @@ xfs_bmap_del_extent(
 					got.br_startblock, got.br_blockcount,
 					&i)))
 				goto done;
-			ASSERT(i == 1);
+			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		da_old = da_new = 0;
 	} else {
@@ -3164,7 +3172,7 @@ xfs_bmap_del_extent(
 		}
 		if ((error = xfs_bmbt_delete(cur, &i)))
 			goto done;
-		ASSERT(i == 1);
+		XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		break;
 
 	case 2:
@@ -3268,7 +3276,7 @@ xfs_bmap_del_extent(
 							got.br_startblock,
 							temp, &i)))
 						goto done;
-					ASSERT(i == 1);
+					XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 					/*
 					 * Update the btree record back
 					 * to the original value.
@@ -3289,7 +3297,7 @@ xfs_bmap_del_extent(
 					error = XFS_ERROR(ENOSPC);
 					goto done;
 				}
-				ASSERT(i == 1);
+				XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			} else
 				flags |= XFS_ILOG_FEXT(whichfork);
 			XFS_IFORK_NEXT_SET(ip, whichfork,
@@ -3992,7 +4000,7 @@ xfs_bmap_add_attrfork(
 		ip->i_d.di_aformat = XFS_DINODE_FMT_EXTENTS;
 	}
 	ASSERT(ip->i_d.di_anextents == 0);
-	VN_HOLD(XFS_ITOV(ip));
+	IHOLD(ip);
 	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	switch (ip->i_d.di_format) {
@@ -5970,7 +5978,7 @@ unlock_and_return:
 	xfs_iunlock_map_shared(ip, lock);
 	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
 
-	kmem_free(map, subnex * sizeof(*map));
+	kmem_free(map);
 
 	return error;
 }
@@ -6088,7 +6096,7 @@ xfs_bmap_get_bp(
 		tp = cur->bc_tp;
 		licp = &tp->t_items;
 		while (!bp && licp != NULL) {
-			if (XFS_LIC_ARE_ALL_FREE(licp)) {
+			if (xfs_lic_are_all_free(licp)) {
 				licp = licp->lic_next;
 				continue;
 			}
@@ -6098,11 +6106,11 @@ xfs_bmap_get_bp(
 				xfs_buf_log_item_t	*bip;
 				xfs_buf_t		*lbp;
 
-				if (XFS_LIC_ISFREE(licp, i)) {
+				if (xfs_lic_isfree(licp, i)) {
 					continue;
 				}
 
-				lidp = XFS_LIC_SLOT(licp, i);
+				lidp = xfs_lic_slot(licp, i);
 				lip = lidp->lid_item;
 				if (lip->li_type != XFS_LI_BUF)
 					continue;
@@ -6359,13 +6367,9 @@ xfs_bmap_count_blocks(
 	mp = ip->i_mount;
 	ifp = XFS_IFORK_PTR(ip, whichfork);
 	if ( XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_EXTENTS ) {
-		if (unlikely(xfs_bmap_count_leaves(ifp, 0,
+		xfs_bmap_count_leaves(ifp, 0,
 			ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t),
-			count) < 0)) {
-			XFS_ERROR_REPORT("xfs_bmap_count_blocks(1)",
-					 XFS_ERRLEVEL_LOW, mp);
-			return XFS_ERROR(EFSCORRUPTED);
-		}
+			count);
 		return 0;
 	}
 
@@ -6446,13 +6450,7 @@ xfs_bmap_count_tree(
 		for (;;) {
 			nextbno = be64_to_cpu(block->bb_rightsib);
 			numrecs = be16_to_cpu(block->bb_numrecs);
-			if (unlikely(xfs_bmap_disk_count_leaves(0,
-					block, numrecs, count) < 0)) {
-				xfs_trans_brelse(tp, bp);
-				XFS_ERROR_REPORT("xfs_bmap_count_tree(2)",
-						 XFS_ERRLEVEL_LOW, mp);
-				return XFS_ERROR(EFSCORRUPTED);
-			}
+			xfs_bmap_disk_count_leaves(0, block, numrecs, count);
 			xfs_trans_brelse(tp, bp);
 			if (nextbno == NULLFSBLOCK)
 				break;
@@ -6470,7 +6468,7 @@ xfs_bmap_count_tree(
 /*
  * Count leaf blocks given a range of extent records.
  */
-STATIC int
+STATIC void
 xfs_bmap_count_leaves(
 	xfs_ifork_t		*ifp,
 	xfs_extnum_t		idx,
@@ -6483,14 +6481,13 @@ xfs_bmap_count_leaves(
 		xfs_bmbt_rec_host_t *frp = xfs_iext_get_ext(ifp, idx + b);
 		*count += xfs_bmbt_get_blockcount(frp);
 	}
-	return 0;
 }
 
 /*
  * Count leaf blocks given a range of extent records originally
  * in btree format.
  */
-STATIC int
+STATIC void
 xfs_bmap_disk_count_leaves(
 	xfs_extnum_t		idx,
 	xfs_bmbt_block_t	*block,
@@ -6504,5 +6501,4 @@ xfs_bmap_disk_count_leaves(
 		frp = XFS_BTREE_REC_ADDR(xfs_bmbt, block, idx + b);
 		*count += xfs_bmbt_disk_get_blockcount(frp);
 	}
-	return 0;
 }
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 6ff70cda451..9f3e3a836d1 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -54,12 +54,23 @@ typedef struct xfs_bmap_free_item
 
 /*
  * Header for free extent list.
+ *
+ * xbf_low is used by the allocator to activate the lowspace algorithm -
+ * when free space is running low the extent allocator may choose to
+ * allocate an extent from an AG without leaving sufficient space for
+ * a btree split when inserting the new extent.  In this case the allocator
+ * will enable the lowspace algorithm which is supposed to allow further
+ * allocations (such as btree splits and newroots) to allocate from
+ * sequential AGs.  In order to avoid locking AGs out of order the lowspace
+ * algorithm will start searching for free space from AG 0.  If the correct
+ * transaction reservations have been made then this algorithm will eventually
+ * find all the space it needs.
  */
 typedef	struct xfs_bmap_free
 {
 	xfs_bmap_free_item_t	*xbf_first;	/* list of to-be-free extents */
 	int			xbf_count;	/* count of items on list */
-	int			xbf_low;	/* kludge: alloc in low mode */
+	int			xbf_low;	/* alloc in low mode */
 } xfs_bmap_free_t;
 
 #define	XFS_BMAP_MAX_NMAP	4
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index 4f0e849d973..23efad29a5c 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -1493,12 +1493,27 @@ xfs_bmbt_split(
 	left = XFS_BUF_TO_BMBT_BLOCK(lbp);
 	args.fsbno = cur->bc_private.b.firstblock;
 	args.firstblock = args.fsbno;
+	args.minleft = 0;
 	if (args.fsbno == NULLFSBLOCK) {
 		args.fsbno = lbno;
 		args.type = XFS_ALLOCTYPE_START_BNO;
-	} else
+		/*
+		 * Make sure there is sufficient room left in the AG to
+		 * complete a full tree split for an extent insert.  If
+		 * we are converting the middle part of an extent then
+		 * we may need space for two tree splits.
+		 *
+		 * We are relying on the caller to make the correct block
+		 * reservation for this operation to succeed.  If the
+		 * reservation amount is insufficient then we may fail a
+		 * block allocation here and corrupt the filesystem.
+		 */
+		args.minleft = xfs_trans_get_block_res(args.tp);
+	} else if (cur->bc_private.b.flist->xbf_low)
+		args.type = XFS_ALLOCTYPE_START_BNO;
+	else
 		args.type = XFS_ALLOCTYPE_NEAR_BNO;
-	args.mod = args.minleft = args.alignment = args.total = args.isfl =
+	args.mod = args.alignment = args.total = args.isfl =
 		args.userdata = args.minalignslop = 0;
 	args.minlen = args.maxlen = args.prod = 1;
 	args.wasdel = cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL;
@@ -1510,6 +1525,21 @@ xfs_bmbt_split(
 		XFS_BMBT_TRACE_CURSOR(cur, ERROR);
 		return error;
 	}
+	if (args.fsbno == NULLFSBLOCK && args.minleft) {
+		/*
+		 * Could not find an AG with enough free space to satisfy
+		 * a full btree split.  Try again without minleft and if
+		 * successful activate the lowspace algorithm.
+		 */
+		args.fsbno = 0;
+		args.type = XFS_ALLOCTYPE_FIRST_AG;
+		args.minleft = 0;
+		if ((error = xfs_alloc_vextent(&args))) {
+			XFS_BMBT_TRACE_CURSOR(cur, ERROR);
+			return error;
+		}
+		cur->bc_private.b.flist->xbf_low = 1;
+	}
 	if (args.fsbno == NULLFSBLOCK) {
 		XFS_BMBT_TRACE_CURSOR(cur, EXIT);
 		*stat = 0;
@@ -2029,22 +2059,8 @@ xfs_bmbt_increment(
  * Insert the current record at the point referenced by cur.
  *
  * A multi-level split of the tree on insert will invalidate the original
- * cursor. It appears, however, that some callers assume that the cursor is
- * always valid. Hence if we do a multi-level split we need to revalidate the
- * cursor.
- *
- * When a split occurs, we will see a new cursor returned. Use that as a
- * trigger to determine if we need to revalidate the original cursor. If we get
- * a split, then use the original irec to lookup up the path of the record we
- * just inserted.
- *
- * Note that the fact that the btree root is in the inode means that we can
- * have the level of the tree change without a "split" occurring at the root
- * level. What happens is that the root is migrated to an allocated block and
- * the inode root is pointed to it. This means a single split can change the
- * level of the tree (level 2 -> level 3) and invalidate the old cursor. Hence
- * the level change should be accounted as a split so as to correctly trigger a
- * revalidation of the old cursor.
+ * cursor.  All callers of this function should assume that the cursor is
+ * no longer valid and revalidate it.
  */
 int					/* error */
 xfs_bmbt_insert(
@@ -2057,14 +2073,11 @@ xfs_bmbt_insert(
 	xfs_fsblock_t	nbno;
 	xfs_btree_cur_t	*ncur;
 	xfs_bmbt_rec_t	nrec;
-	xfs_bmbt_irec_t	oirec;		/* original irec */
 	xfs_btree_cur_t	*pcur;
-	int		splits = 0;
 
 	XFS_BMBT_TRACE_CURSOR(cur, ENTRY);
 	level = 0;
 	nbno = NULLFSBLOCK;
-	oirec = cur->bc_rec.b;
 	xfs_bmbt_disk_set_all(&nrec, &cur->bc_rec.b);
 	ncur = NULL;
 	pcur = cur;
@@ -2073,13 +2086,11 @@ xfs_bmbt_insert(
 				&i))) {
 			if (pcur != cur)
 				xfs_btree_del_cursor(pcur, XFS_BTREE_ERROR);
-			goto error0;
+			XFS_BMBT_TRACE_CURSOR(cur, ERROR);
+			return error;
 		}
 		XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
 		if (pcur != cur && (ncur || nbno == NULLFSBLOCK)) {
-			/* allocating a new root is effectively a split */
-			if (cur->bc_nlevels != pcur->bc_nlevels)
-				splits++;
 			cur->bc_nlevels = pcur->bc_nlevels;
 			cur->bc_private.b.allocated +=
 				pcur->bc_private.b.allocated;
@@ -2093,21 +2104,10 @@ xfs_bmbt_insert(
 			xfs_btree_del_cursor(pcur, XFS_BTREE_NOERROR);
 		}
 		if (ncur) {
-			splits++;
 			pcur = ncur;
 			ncur = NULL;
 		}
 	} while (nbno != NULLFSBLOCK);
-
-	if (splits > 1) {
-		/* revalidate the old cursor as we had a multi-level split */
-		error = xfs_bmbt_lookup_eq(cur, oirec.br_startoff,
-				oirec.br_startblock, oirec.br_blockcount, &i);
-		if (error)
-			goto error0;
-		ASSERT(i == 1);
-	}
-
 	XFS_BMBT_TRACE_CURSOR(cur, EXIT);
 	*stat = i;
 	return 0;
@@ -2254,7 +2254,9 @@ xfs_bmbt_newroot(
 #endif
 		args.fsbno = be64_to_cpu(*pp);
 		args.type = XFS_ALLOCTYPE_START_BNO;
-	} else
+	} else if (cur->bc_private.b.flist->xbf_low)
+		args.type = XFS_ALLOCTYPE_START_BNO;
+	else
 		args.type = XFS_ALLOCTYPE_NEAR_BNO;
 	if ((error = xfs_alloc_vextent(&args))) {
 		XFS_BMBT_TRACE_CURSOR(cur, ERROR);
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index aeb87ca69fc..cc593a84c34 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -46,38 +46,11 @@ kmem_zone_t	*xfs_btree_cur_zone;
 /*
  * Btree magic numbers.
  */
-const __uint32_t xfs_magics[XFS_BTNUM_MAX] =
-{
+const __uint32_t xfs_magics[XFS_BTNUM_MAX] = {
 	XFS_ABTB_MAGIC, XFS_ABTC_MAGIC, XFS_BMAP_MAGIC, XFS_IBT_MAGIC
 };
 
 /*
- * Prototypes for internal routines.
- */
-
-/*
- * Checking routine: return maxrecs for the block.
- */
-STATIC int				/* number of records fitting in block */
-xfs_btree_maxrecs(
-	xfs_btree_cur_t		*cur,	/* btree cursor */
-	xfs_btree_block_t	*block);/* generic btree block pointer */
-
-/*
- * Internal routines.
- */
-
-/*
- * Retrieve the block pointer from the cursor at the given level.
- * This may be a bmap btree root or from a buffer.
- */
-STATIC xfs_btree_block_t *			/* generic btree block pointer */
-xfs_btree_get_block(
-	xfs_btree_cur_t		*cur,	/* btree cursor */
-	int			level,	/* level in btree */
-	struct xfs_buf		**bpp);	/* buffer containing the block */
-
-/*
  * Checking routine: return maxrecs for the block.
  */
 STATIC int				/* number of records fitting in block */
@@ -457,35 +430,6 @@ xfs_btree_dup_cursor(
 }
 
 /*
- * Change the cursor to point to the first record at the given level.
- * Other levels are unaffected.
- */
-int					/* success=1, failure=0 */
-xfs_btree_firstrec(
-	xfs_btree_cur_t		*cur,	/* btree cursor */
-	int			level)	/* level to change */
-{
-	xfs_btree_block_t	*block;	/* generic btree block pointer */
-	xfs_buf_t		*bp;	/* buffer containing block */
-
-	/*
-	 * Get the block pointer for this level.
-	 */
-	block = xfs_btree_get_block(cur, level, &bp);
-	xfs_btree_check_block(cur, block, level, bp);
-	/*
-	 * It's empty, there is no such record.
-	 */
-	if (!block->bb_h.bb_numrecs)
-		return 0;
-	/*
-	 * Set the ptr value to 1, that's the first record/key.
-	 */
-	cur->bc_ptrs[level] = 1;
-	return 1;
-}
-
-/*
  * Retrieve the block pointer from the cursor at the given level.
  * This may be a bmap btree root or from a buffer.
  */
@@ -626,6 +570,13 @@ xfs_btree_init_cursor(
 		cur->bc_private.a.agbp = agbp;
 		cur->bc_private.a.agno = agno;
 		break;
+	case XFS_BTNUM_INO:
+		/*
+		 * Inode allocation btree fields.
+		 */
+		cur->bc_private.a.agbp = agbp;
+		cur->bc_private.a.agno = agno;
+		break;
 	case XFS_BTNUM_BMAP:
 		/*
 		 * Bmap btree fields.
@@ -638,13 +589,6 @@ xfs_btree_init_cursor(
 		cur->bc_private.b.flags = 0;
 		cur->bc_private.b.whichfork = whichfork;
 		break;
-	case XFS_BTNUM_INO:
-		/*
-		 * Inode allocation btree fields.
-		 */
-		cur->bc_private.i.agbp = agbp;
-		cur->bc_private.i.agno = agno;
-		break;
 	default:
 		ASSERT(0);
 	}
@@ -671,6 +615,35 @@ xfs_btree_islastblock(
 }
 
 /*
+ * Change the cursor to point to the first record at the given level.
+ * Other levels are unaffected.
+ */
+int					/* success=1, failure=0 */
+xfs_btree_firstrec(
+	xfs_btree_cur_t		*cur,	/* btree cursor */
+	int			level)	/* level to change */
+{
+	xfs_btree_block_t	*block;	/* generic btree block pointer */
+	xfs_buf_t		*bp;	/* buffer containing block */
+
+	/*
+	 * Get the block pointer for this level.
+	 */
+	block = xfs_btree_get_block(cur, level, &bp);
+	xfs_btree_check_block(cur, block, level, bp);
+	/*
+	 * It's empty, there is no such record.
+	 */
+	if (!block->bb_h.bb_numrecs)
+		return 0;
+	/*
+	 * Set the ptr value to 1, that's the first record/key.
+	 */
+	cur->bc_ptrs[level] = 1;
+	return 1;
+}
+
+/*
  * Change the cursor to point to the last record in the current block
  * at the given level.  Other levels are unaffected.
  */
@@ -890,12 +863,12 @@ xfs_btree_readahead_core(
 	case XFS_BTNUM_INO:
 		i = XFS_BUF_TO_INOBT_BLOCK(cur->bc_bufs[lev]);
 		if ((lr & XFS_BTCUR_LEFTRA) && be32_to_cpu(i->bb_leftsib) != NULLAGBLOCK) {
-			xfs_btree_reada_bufs(cur->bc_mp, cur->bc_private.i.agno,
+			xfs_btree_reada_bufs(cur->bc_mp, cur->bc_private.a.agno,
 				be32_to_cpu(i->bb_leftsib), 1);
 			rval++;
 		}
 		if ((lr & XFS_BTCUR_RIGHTRA) && be32_to_cpu(i->bb_rightsib) != NULLAGBLOCK) {
-			xfs_btree_reada_bufs(cur->bc_mp, cur->bc_private.i.agno,
+			xfs_btree_reada_bufs(cur->bc_mp, cur->bc_private.a.agno,
 				be32_to_cpu(i->bb_rightsib), 1);
 			rval++;
 		}
diff --git a/fs/xfs/xfs_btree.h b/fs/xfs/xfs_btree.h
index 7440b78f9ce..1f528a2a375 100644
--- a/fs/xfs/xfs_btree.h
+++ b/fs/xfs/xfs_btree.h
@@ -158,8 +158,8 @@ typedef struct xfs_btree_cur
 	__uint8_t	bc_blocklog;	/* log2(blocksize) of btree blocks */
 	xfs_btnum_t	bc_btnum;	/* identifies which btree type */
 	union {
-		struct {			/* needed for BNO, CNT */
-			struct xfs_buf	*agbp;	/* agf buffer pointer */
+		struct {			/* needed for BNO, CNT, INO */
+			struct xfs_buf	*agbp;	/* agf/agi buffer pointer */
 			xfs_agnumber_t	agno;	/* ag number */
 		} a;
 		struct {			/* needed for BMAP */
@@ -172,10 +172,6 @@ typedef struct xfs_btree_cur
 			char		flags;		/* flags */
 #define	XFS_BTCUR_BPRV_WASDEL	1			/* was delayed */
 		} b;
-		struct {			/* needed for INO */
-			struct xfs_buf	*agbp;	/* agi buffer pointer */
-			xfs_agnumber_t	agno;	/* ag number */
-		} i;
 	}		bc_private;	/* per-btree type data */
 } xfs_btree_cur_t;
 
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 53a71c62025..002fc2617c8 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -732,12 +732,13 @@ xfs_buf_item_init(
 	bip->bli_item.li_ops = &xfs_buf_item_ops;
 	bip->bli_item.li_mountp = mp;
 	bip->bli_buf = bp;
+	xfs_buf_hold(bp);
 	bip->bli_format.blf_type = XFS_LI_BUF;
 	bip->bli_format.blf_blkno = (__int64_t)XFS_BUF_ADDR(bp);
 	bip->bli_format.blf_len = (ushort)BTOBB(XFS_BUF_COUNT(bp));
 	bip->bli_format.blf_map_size = map_size;
 #ifdef XFS_BLI_TRACE
-	bip->bli_trace = ktrace_alloc(XFS_BLI_TRACE_SIZE, KM_SLEEP);
+	bip->bli_trace = ktrace_alloc(XFS_BLI_TRACE_SIZE, KM_NOFS);
 #endif
 
 #ifdef XFS_TRANS_DEBUG
@@ -867,6 +868,21 @@ xfs_buf_item_dirty(
 	return (bip->bli_flags & XFS_BLI_DIRTY);
 }
 
+STATIC void
+xfs_buf_item_free(
+	xfs_buf_log_item_t	*bip)
+{
+#ifdef XFS_TRANS_DEBUG
+	kmem_free(bip->bli_orig);
+	kmem_free(bip->bli_logged);
+#endif /* XFS_TRANS_DEBUG */
+
+#ifdef XFS_BLI_TRACE
+	ktrace_free(bip->bli_trace);
+#endif
+	kmem_zone_free(xfs_buf_item_zone, bip);
+}
+
 /*
  * This is called when the buf log item is no longer needed.  It should
  * free the buf log item associated with the given buffer and clear
@@ -887,18 +903,8 @@ xfs_buf_item_relse(
 	    (XFS_BUF_IODONE_FUNC(bp) != NULL)) {
 		XFS_BUF_CLR_IODONE_FUNC(bp);
 	}
-
-#ifdef XFS_TRANS_DEBUG
-	kmem_free(bip->bli_orig, XFS_BUF_COUNT(bp));
-	bip->bli_orig = NULL;
-	kmem_free(bip->bli_logged, XFS_BUF_COUNT(bp) / NBBY);
-	bip->bli_logged = NULL;
-#endif /* XFS_TRANS_DEBUG */
-
-#ifdef XFS_BLI_TRACE
-	ktrace_free(bip->bli_trace);
-#endif
-	kmem_zone_free(xfs_buf_item_zone, bip);
+	xfs_buf_rele(bp);
+	xfs_buf_item_free(bip);
 }
 
 
@@ -1056,7 +1062,7 @@ xfs_buf_iodone_callbacks(
 			   anyway. */
 			XFS_BUF_SET_BRELSE_FUNC(bp,xfs_buf_error_relse);
 			XFS_BUF_DONE(bp);
-			XFS_BUF_V_IODONESEMA(bp);
+			XFS_BUF_FINISH_IOWAIT(bp);
 		}
 		return;
 	}
@@ -1120,6 +1126,7 @@ xfs_buf_iodone(
 
 	ASSERT(bip->bli_buf == bp);
 
+	xfs_buf_rele(bp);
 	mp = bip->bli_item.li_mountp;
 
 	/*
@@ -1136,18 +1143,7 @@ xfs_buf_iodone(
 	 * xfs_trans_delete_ail() drops the AIL lock.
 	 */
 	xfs_trans_delete_ail(mp, (xfs_log_item_t *)bip);
-
-#ifdef XFS_TRANS_DEBUG
-	kmem_free(bip->bli_orig, XFS_BUF_COUNT(bp));
-	bip->bli_orig = NULL;
-	kmem_free(bip->bli_logged, XFS_BUF_COUNT(bp) / NBBY);
-	bip->bli_logged = NULL;
-#endif /* XFS_TRANS_DEBUG */
-
-#ifdef XFS_BLI_TRACE
-	ktrace_free(bip->bli_trace);
-#endif
-	kmem_zone_free(xfs_buf_item_zone, bip);
+	xfs_buf_item_free(bip);
 }
 
 #if defined(XFS_BLI_TRACE)
diff --git a/fs/xfs/xfs_clnt.h b/fs/xfs/xfs_clnt.h
index d5d1e60ee22..d2ce5dd70d8 100644
--- a/fs/xfs/xfs_clnt.h
+++ b/fs/xfs/xfs_clnt.h
@@ -78,6 +78,7 @@ struct xfs_mount_args {
 #define XFSMNT_IOSIZE		0x00002000	/* optimize for I/O size */
 #define XFSMNT_OSYNCISOSYNC	0x00004000	/* o_sync is REALLY o_sync */
 						/* (osyncisdsync is default) */
+#define XFSMNT_NOATTR2		0x00008000	/* turn off ATTR2 EA format */
 #define XFSMNT_32BITINODES	0x00200000	/* restrict inodes to 32
 						 * bits of address space */
 #define XFSMNT_GQUOTA		0x00400000	/* group quota accounting */
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index 021a8f7e563..9e561a9cefc 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -1431,7 +1431,7 @@ xfs_da_path_shift(xfs_da_state_t *state, xfs_da_state_path_t *path,
 	}
 	if (level < 0) {
 		*result = XFS_ERROR(ENOENT);	/* we're out of our tree */
-		ASSERT(args->oknoent);
+		ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
 		return(0);
 	}
 
@@ -1530,6 +1530,28 @@ xfs_da_hashname(const uchar_t *name, int namelen)
 	}
 }
 
+enum xfs_dacmp
+xfs_da_compname(
+	struct xfs_da_args *args,
+	const char 	*name,
+	int 		len)
+{
+	return (args->namelen == len && memcmp(args->name, name, len) == 0) ?
+					XFS_CMP_EXACT : XFS_CMP_DIFFERENT;
+}
+
+static xfs_dahash_t
+xfs_default_hashname(
+	struct xfs_name	*name)
+{
+	return xfs_da_hashname(name->name, name->len);
+}
+
+const struct xfs_nameops xfs_default_nameops = {
+	.hashname	= xfs_default_hashname,
+	.compname	= xfs_da_compname
+};
+
 /*
  * Add a block to the btree ahead of the file.
  * Return the new block number to the caller.
@@ -1598,7 +1620,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno)
 					args->firstblock, args->total,
 					&mapp[mapi], &nmap, args->flist,
 					NULL))) {
-				kmem_free(mapp, sizeof(*mapp) * count);
+				kmem_free(mapp);
 				return error;
 			}
 			if (nmap < 1)
@@ -1620,11 +1642,11 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno)
 	    mapp[mapi - 1].br_startoff + mapp[mapi - 1].br_blockcount !=
 	    bno + count) {
 		if (mapp != &map)
-			kmem_free(mapp, sizeof(*mapp) * count);
+			kmem_free(mapp);
 		return XFS_ERROR(ENOSPC);
 	}
 	if (mapp != &map)
-		kmem_free(mapp, sizeof(*mapp) * count);
+		kmem_free(mapp);
 	*new_blkno = (xfs_dablk_t)bno;
 	return 0;
 }
@@ -2090,10 +2112,10 @@ xfs_da_do_buf(
 		}
 	}
 	if (bplist) {
-		kmem_free(bplist, sizeof(*bplist) * nmap);
+		kmem_free(bplist);
 	}
 	if (mapp != &map) {
-		kmem_free(mapp, sizeof(*mapp) * nfsb);
+		kmem_free(mapp);
 	}
 	if (bpp)
 		*bpp = rbp;
@@ -2102,11 +2124,11 @@ exit1:
 	if (bplist) {
 		for (i = 0; i < nbplist; i++)
 			xfs_trans_brelse(trans, bplist[i]);
-		kmem_free(bplist, sizeof(*bplist) * nmap);
+		kmem_free(bplist);
 	}
 exit0:
 	if (mapp != &map)
-		kmem_free(mapp, sizeof(*mapp) * nfsb);
+		kmem_free(mapp);
 	if (bpp)
 		*bpp = NULL;
 	return error;
@@ -2218,7 +2240,7 @@ xfs_da_state_free(xfs_da_state_t *state)
 
 #ifdef XFS_DABUF_DEBUG
 xfs_dabuf_t	*xfs_dabuf_global_list;
-spinlock_t	xfs_dabuf_global_lock;
+static DEFINE_SPINLOCK(xfs_dabuf_global_lock);
 #endif
 
 /*
@@ -2315,7 +2337,7 @@ xfs_da_buf_done(xfs_dabuf_t *dabuf)
 	if (dabuf->dirty)
 		xfs_da_buf_clean(dabuf);
 	if (dabuf->nbuf > 1)
-		kmem_free(dabuf->data, BBTOB(dabuf->bbcount));
+		kmem_free(dabuf->data);
 #ifdef XFS_DABUF_DEBUG
 	{
 		spin_lock(&xfs_dabuf_global_lock);
@@ -2332,7 +2354,7 @@ xfs_da_buf_done(xfs_dabuf_t *dabuf)
 	if (dabuf->nbuf == 1)
 		kmem_zone_free(xfs_dabuf_zone, dabuf);
 	else
-		kmem_free(dabuf, XFS_DA_BUF_SIZE(dabuf->nbuf));
+		kmem_free(dabuf);
 }
 
 /*
@@ -2403,7 +2425,7 @@ xfs_da_brelse(xfs_trans_t *tp, xfs_dabuf_t *dabuf)
 	for (i = 0; i < nbuf; i++)
 		xfs_trans_brelse(tp, bplist[i]);
 	if (bplist != &bp)
-		kmem_free(bplist, nbuf * sizeof(*bplist));
+		kmem_free(bplist);
 }
 
 /*
@@ -2429,7 +2451,7 @@ xfs_da_binval(xfs_trans_t *tp, xfs_dabuf_t *dabuf)
 	for (i = 0; i < nbuf; i++)
 		xfs_trans_binval(tp, bplist[i]);
 	if (bplist != &bp)
-		kmem_free(bplist, nbuf * sizeof(*bplist));
+		kmem_free(bplist);
 }
 
 /*
diff --git a/fs/xfs/xfs_da_btree.h b/fs/xfs/xfs_da_btree.h
index 7facf86f74f..8be0b00ede9 100644
--- a/fs/xfs/xfs_da_btree.h
+++ b/fs/xfs/xfs_da_btree.h
@@ -99,6 +99,15 @@ typedef struct xfs_da_node_entry xfs_da_node_entry_t;
  *========================================================================*/
 
 /*
+ * Search comparison results
+ */
+enum xfs_dacmp {
+	XFS_CMP_DIFFERENT,	/* names are completely different */
+	XFS_CMP_EXACT,		/* names are exactly the same */
+	XFS_CMP_CASE		/* names are same but differ in case */
+};
+
+/*
  * Structure to ease passing around component names.
  */
 typedef struct xfs_da_args {
@@ -123,13 +132,20 @@ typedef struct xfs_da_args {
 	int		index2;		/* index of 2nd attr in blk */
 	xfs_dablk_t	rmtblkno2;	/* remote attr value starting blkno */
 	int		rmtblkcnt2;	/* remote attr value block count */
-	unsigned char	justcheck;	/* T/F: check for ok with no space */
-	unsigned char	rename;		/* T/F: this is an atomic rename op */
-	unsigned char	addname;	/* T/F: this is an add operation */
-	unsigned char	oknoent;	/* T/F: ok to return ENOENT, else die */
+	int		op_flags;	/* operation flags */
+	enum xfs_dacmp	cmpresult;	/* name compare result for lookups */
 } xfs_da_args_t;
 
 /*
+ * Operation flags:
+ */
+#define XFS_DA_OP_JUSTCHECK	0x0001	/* check for ok with no space */
+#define XFS_DA_OP_RENAME	0x0002	/* this is an atomic rename op */
+#define XFS_DA_OP_ADDNAME	0x0004	/* this is an add operation */
+#define XFS_DA_OP_OKNOENT	0x0008	/* lookup/add op, ENOENT ok, else die */
+#define XFS_DA_OP_CILOOKUP	0x0010	/* lookup to return CI name if found */
+
+/*
  * Structure to describe buffer(s) for a block.
  * This is needed in the directory version 2 format case, when
  * multiple non-contiguous fsblocks might be needed to cover one
@@ -201,6 +217,14 @@ typedef struct xfs_da_state {
 		(uint)(XFS_DA_LOGOFF(BASE, ADDR)), \
 		(uint)(XFS_DA_LOGOFF(BASE, ADDR)+(SIZE)-1)
 
+/*
+ * Name ops for directory and/or attr name operations
+ */
+struct xfs_nameops {
+	xfs_dahash_t	(*hashname)(struct xfs_name *);
+	enum xfs_dacmp	(*compname)(struct xfs_da_args *, const char *, int);
+};
+
 
 #ifdef __KERNEL__
 /*========================================================================
@@ -249,6 +273,10 @@ int	xfs_da_shrink_inode(xfs_da_args_t *args, xfs_dablk_t dead_blkno,
 					  xfs_dabuf_t *dead_buf);
 
 uint xfs_da_hashname(const uchar_t *name_string, int name_length);
+enum xfs_dacmp xfs_da_compname(struct xfs_da_args *args,
+				const char *name, int len);
+
+
 xfs_da_state_t *xfs_da_state_alloc(void);
 void xfs_da_state_free(xfs_da_state_t *state);
 
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index 5f3647cb988..75b0cd4da0e 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -116,7 +116,7 @@ xfs_swapext(
  out_put_file:
 	fput(file);
  out_free_sxp:
-	kmem_free(sxp, sizeof(xfs_swapext_t));
+	kmem_free(sxp);
  out:
 	return error;
 }
@@ -128,10 +128,8 @@ xfs_swap_extents(
 	xfs_swapext_t	*sxp)
 {
 	xfs_mount_t	*mp;
-	xfs_inode_t	*ips[2];
 	xfs_trans_t	*tp;
 	xfs_bstat_t	*sbp = &sxp->sx_stat;
-	bhv_vnode_t	*vp, *tvp;
 	xfs_ifork_t	*tempifp, *ifp, *tifp;
 	int		ilf_fields, tilf_fields;
 	static uint	lock_flags = XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL;
@@ -150,19 +148,15 @@ xfs_swap_extents(
 	}
 
 	sbp = &sxp->sx_stat;
-	vp = XFS_ITOV(ip);
-	tvp = XFS_ITOV(tip);
-
-	/* Lock in i_ino order */
-	if (ip->i_ino < tip->i_ino) {
-		ips[0] = ip;
-		ips[1] = tip;
-	} else {
-		ips[0] = tip;
-		ips[1] = ip;
-	}
 
-	xfs_lock_inodes(ips, 2, lock_flags);
+	/*
+	 * we have to do two separate lock calls here to keep lockdep
+	 * happy. If we try to get all the locks in one call, lock will
+	 * report false positives when we drop the ILOCK and regain them
+	 * below.
+	 */
+	xfs_lock_two_inodes(ip, tip, XFS_IOLOCK_EXCL);
+	xfs_lock_two_inodes(ip, tip, XFS_ILOCK_EXCL);
 	locked = 1;
 
 	/* Verify that both files have the same format */
@@ -184,7 +178,7 @@ xfs_swap_extents(
 		goto error0;
 	}
 
-	if (VN_CACHED(tvp) != 0) {
+	if (VN_CACHED(VFS_I(tip)) != 0) {
 		xfs_inval_cached_trace(tip, 0, -1, 0, -1);
 		error = xfs_flushinval_pages(tip, 0, -1,
 				FI_REMAPF_LOCKED);
@@ -193,7 +187,7 @@ xfs_swap_extents(
 	}
 
 	/* Verify O_DIRECT for ftmp */
-	if (VN_CACHED(tvp) != 0) {
+	if (VN_CACHED(VFS_I(tip)) != 0) {
 		error = XFS_ERROR(EINVAL);
 		goto error0;
 	}
@@ -237,7 +231,7 @@ xfs_swap_extents(
 	 * vop_read (or write in the case of autogrow) they block on the iolock
 	 * until we have switched the extents.
 	 */
-	if (VN_MAPPED(vp)) {
+	if (VN_MAPPED(VFS_I(ip))) {
 		error = XFS_ERROR(EBUSY);
 		goto error0;
 	}
@@ -265,7 +259,7 @@ xfs_swap_extents(
 		locked = 0;
 		goto error0;
 	}
-	xfs_lock_inodes(ips, 2, XFS_ILOCK_EXCL);
+	xfs_lock_two_inodes(ip, tip, XFS_ILOCK_EXCL);
 
 	/*
 	 * Count the number of extended attribute blocks
@@ -350,15 +344,11 @@ xfs_swap_extents(
 		break;
 	}
 
-	/*
-	 * Increment vnode ref counts since xfs_trans_commit &
-	 * xfs_trans_cancel will both unlock the inodes and
-	 * decrement the associated ref counts.
-	 */
-	VN_HOLD(vp);
-	VN_HOLD(tvp);
 
+	IHOLD(ip);
 	xfs_trans_ijoin(tp, ip, lock_flags);
+
+	IHOLD(tip);
 	xfs_trans_ijoin(tp, tip, lock_flags);
 
 	xfs_trans_log_inode(tp, ip,  ilf_fields);
@@ -381,6 +371,6 @@ xfs_swap_extents(
 		xfs_iunlock(tip, lock_flags);
 	}
 	if (tempifp != NULL)
-		kmem_free(tempifp, sizeof(xfs_ifork_t));
+		kmem_free(tempifp);
 	return error;
 }
diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c
index 7cb26529766..80e0dc51361 100644
--- a/fs/xfs/xfs_dir2.c
+++ b/fs/xfs/xfs_dir2.c
@@ -46,6 +46,54 @@
 
 struct xfs_name xfs_name_dotdot = {"..", 2};
 
+extern const struct xfs_nameops xfs_default_nameops;
+
+/*
+ * ASCII case-insensitive (ie. A-Z) support for directories that was
+ * used in IRIX.
+ */
+STATIC xfs_dahash_t
+xfs_ascii_ci_hashname(
+	struct xfs_name	*name)
+{
+	xfs_dahash_t	hash;
+	int		i;
+
+	for (i = 0, hash = 0; i < name->len; i++)
+		hash = tolower(name->name[i]) ^ rol32(hash, 7);
+
+	return hash;
+}
+
+STATIC enum xfs_dacmp
+xfs_ascii_ci_compname(
+	struct xfs_da_args *args,
+	const char	*name,
+	int 		len)
+{
+	enum xfs_dacmp	result;
+	int		i;
+
+	if (args->namelen != len)
+		return XFS_CMP_DIFFERENT;
+
+	result = XFS_CMP_EXACT;
+	for (i = 0; i < len; i++) {
+		if (args->name[i] == name[i])
+			continue;
+		if (tolower(args->name[i]) != tolower(name[i]))
+			return XFS_CMP_DIFFERENT;
+		result = XFS_CMP_CASE;
+	}
+
+	return result;
+}
+
+static struct xfs_nameops xfs_ascii_ci_nameops = {
+	.hashname	= xfs_ascii_ci_hashname,
+	.compname	= xfs_ascii_ci_compname,
+};
+
 void
 xfs_dir_mount(
 	xfs_mount_t	*mp)
@@ -65,6 +113,10 @@ xfs_dir_mount(
 		(mp->m_dirblksize - (uint)sizeof(xfs_da_node_hdr_t)) /
 		(uint)sizeof(xfs_da_node_entry_t);
 	mp->m_dir_magicpct = (mp->m_dirblksize * 37) / 100;
+	if (xfs_sb_version_hasasciici(&mp->m_sb))
+		mp->m_dirnameops = &xfs_ascii_ci_nameops;
+	else
+		mp->m_dirnameops = &xfs_default_nameops;
 }
 
 /*
@@ -162,9 +214,10 @@ xfs_dir_createname(
 		return rval;
 	XFS_STATS_INC(xs_dir_create);
 
+	memset(&args, 0, sizeof(xfs_da_args_t));
 	args.name = name->name;
 	args.namelen = name->len;
-	args.hashval = xfs_da_hashname(name->name, name->len);
+	args.hashval = dp->i_mount->m_dirnameops->hashname(name);
 	args.inumber = inum;
 	args.dp = dp;
 	args.firstblock = first;
@@ -172,8 +225,7 @@ xfs_dir_createname(
 	args.total = total;
 	args.whichfork = XFS_DATA_FORK;
 	args.trans = tp;
-	args.justcheck = 0;
-	args.addname = args.oknoent = 1;
+	args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT;
 
 	if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
 		rval = xfs_dir2_sf_addname(&args);
@@ -191,14 +243,43 @@ xfs_dir_createname(
 }
 
 /*
+ * If doing a CI lookup and case-insensitive match, dup actual name into
+ * args.value. Return EEXIST for success (ie. name found) or an error.
+ */
+int
+xfs_dir_cilookup_result(
+	struct xfs_da_args *args,
+	const char	*name,
+	int		len)
+{
+	if (args->cmpresult == XFS_CMP_DIFFERENT)
+		return ENOENT;
+	if (args->cmpresult != XFS_CMP_CASE ||
+					!(args->op_flags & XFS_DA_OP_CILOOKUP))
+		return EEXIST;
+
+	args->value = kmem_alloc(len, KM_MAYFAIL);
+	if (!args->value)
+		return ENOMEM;
+
+	memcpy(args->value, name, len);
+	args->valuelen = len;
+	return EEXIST;
+}
+
+/*
  * Lookup a name in a directory, give back the inode number.
+ * If ci_name is not NULL, returns the actual name in ci_name if it differs
+ * to name, or ci_name->name is set to NULL for an exact match.
  */
+
 int
 xfs_dir_lookup(
 	xfs_trans_t	*tp,
 	xfs_inode_t	*dp,
 	struct xfs_name	*name,
-	xfs_ino_t	*inum)		/* out: inode number */
+	xfs_ino_t	*inum,		/* out: inode number */
+	struct xfs_name *ci_name)	/* out: actual name if CI match */
 {
 	xfs_da_args_t	args;
 	int		rval;
@@ -206,15 +287,17 @@ xfs_dir_lookup(
 
 	ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR);
 	XFS_STATS_INC(xs_dir_lookup);
-	memset(&args, 0, sizeof(xfs_da_args_t));
 
+	memset(&args, 0, sizeof(xfs_da_args_t));
 	args.name = name->name;
 	args.namelen = name->len;
-	args.hashval = xfs_da_hashname(name->name, name->len);
+	args.hashval = dp->i_mount->m_dirnameops->hashname(name);
 	args.dp = dp;
 	args.whichfork = XFS_DATA_FORK;
 	args.trans = tp;
-	args.oknoent = 1;
+	args.op_flags = XFS_DA_OP_OKNOENT;
+	if (ci_name)
+		args.op_flags |= XFS_DA_OP_CILOOKUP;
 
 	if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
 		rval = xfs_dir2_sf_lookup(&args);
@@ -230,8 +313,13 @@ xfs_dir_lookup(
 		rval = xfs_dir2_node_lookup(&args);
 	if (rval == EEXIST)
 		rval = 0;
-	if (rval == 0)
+	if (!rval) {
 		*inum = args.inumber;
+		if (ci_name) {
+			ci_name->name = args.value;
+			ci_name->len = args.valuelen;
+		}
+	}
 	return rval;
 }
 
@@ -255,9 +343,10 @@ xfs_dir_removename(
 	ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR);
 	XFS_STATS_INC(xs_dir_remove);
 
+	memset(&args, 0, sizeof(xfs_da_args_t));
 	args.name = name->name;
 	args.namelen = name->len;
-	args.hashval = xfs_da_hashname(name->name, name->len);
+	args.hashval = dp->i_mount->m_dirnameops->hashname(name);
 	args.inumber = ino;
 	args.dp = dp;
 	args.firstblock = first;
@@ -265,7 +354,6 @@ xfs_dir_removename(
 	args.total = total;
 	args.whichfork = XFS_DATA_FORK;
 	args.trans = tp;
-	args.justcheck = args.addname = args.oknoent = 0;
 
 	if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
 		rval = xfs_dir2_sf_removename(&args);
@@ -338,9 +426,10 @@ xfs_dir_replace(
 	if ((rval = xfs_dir_ino_validate(tp->t_mountp, inum)))
 		return rval;
 
+	memset(&args, 0, sizeof(xfs_da_args_t));
 	args.name = name->name;
 	args.namelen = name->len;
-	args.hashval = xfs_da_hashname(name->name, name->len);
+	args.hashval = dp->i_mount->m_dirnameops->hashname(name);
 	args.inumber = inum;
 	args.dp = dp;
 	args.firstblock = first;
@@ -348,7 +437,6 @@ xfs_dir_replace(
 	args.total = total;
 	args.whichfork = XFS_DATA_FORK;
 	args.trans = tp;
-	args.justcheck = args.addname = args.oknoent = 0;
 
 	if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
 		rval = xfs_dir2_sf_replace(&args);
@@ -384,15 +472,16 @@ xfs_dir_canenter(
 		return 0;
 
 	ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR);
-	memset(&args, 0, sizeof(xfs_da_args_t));
 
+	memset(&args, 0, sizeof(xfs_da_args_t));
 	args.name = name->name;
 	args.namelen = name->len;
-	args.hashval = xfs_da_hashname(name->name, name->len);
+	args.hashval = dp->i_mount->m_dirnameops->hashname(name);
 	args.dp = dp;
 	args.whichfork = XFS_DATA_FORK;
 	args.trans = tp;
-	args.justcheck = args.addname = args.oknoent = 1;
+	args.op_flags = XFS_DA_OP_JUSTCHECK | XFS_DA_OP_ADDNAME |
+							XFS_DA_OP_OKNOENT;
 
 	if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
 		rval = xfs_dir2_sf_addname(&args);
@@ -493,7 +582,7 @@ xfs_dir2_grow_inode(
 					args->firstblock, args->total,
 					&mapp[mapi], &nmap, args->flist,
 					NULL))) {
-				kmem_free(mapp, sizeof(*mapp) * count);
+				kmem_free(mapp);
 				return error;
 			}
 			if (nmap < 1)
@@ -525,14 +614,14 @@ xfs_dir2_grow_inode(
 	    mapp[mapi - 1].br_startoff + mapp[mapi - 1].br_blockcount !=
 	    bno + count) {
 		if (mapp != &map)
-			kmem_free(mapp, sizeof(*mapp) * count);
+			kmem_free(mapp);
 		return XFS_ERROR(ENOSPC);
 	}
 	/*
 	 * Done with the temporary mapping table.
 	 */
 	if (mapp != &map)
-		kmem_free(mapp, sizeof(*mapp) * count);
+		kmem_free(mapp);
 	*dbp = xfs_dir2_da_to_db(mp, (xfs_dablk_t)bno);
 	/*
 	 * Update file's size if this is the data space and it grew.
diff --git a/fs/xfs/xfs_dir2.h b/fs/xfs/xfs_dir2.h
index 6392f939029..1d9ef96f33a 100644
--- a/fs/xfs/xfs_dir2.h
+++ b/fs/xfs/xfs_dir2.h
@@ -74,7 +74,8 @@ extern int xfs_dir_createname(struct xfs_trans *tp, struct xfs_inode *dp,
 				xfs_fsblock_t *first,
 				struct xfs_bmap_free *flist, xfs_extlen_t tot);
 extern int xfs_dir_lookup(struct xfs_trans *tp, struct xfs_inode *dp,
-				struct xfs_name *name, xfs_ino_t *inum);
+				struct xfs_name *name, xfs_ino_t *inum,
+				struct xfs_name *ci_name);
 extern int xfs_dir_removename(struct xfs_trans *tp, struct xfs_inode *dp,
 				struct xfs_name *name, xfs_ino_t ino,
 				xfs_fsblock_t *first,
@@ -99,4 +100,7 @@ extern int xfs_dir2_isleaf(struct xfs_trans *tp, struct xfs_inode *dp,
 extern int xfs_dir2_shrink_inode(struct xfs_da_args *args, xfs_dir2_db_t db,
 				struct xfs_dabuf *bp);
 
+extern int xfs_dir_cilookup_result(struct xfs_da_args *args, const char *name,
+				int len);
+
 #endif	/* __XFS_DIR2_H__ */
diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c
index fb5a556725b..e2fa0a1d8e9 100644
--- a/fs/xfs/xfs_dir2_block.c
+++ b/fs/xfs/xfs_dir2_block.c
@@ -215,7 +215,7 @@ xfs_dir2_block_addname(
 	/*
 	 * If this isn't a real add, we're done with the buffer.
 	 */
-	if (args->justcheck)
+	if (args->op_flags & XFS_DA_OP_JUSTCHECK)
 		xfs_da_brelse(tp, bp);
 	/*
 	 * If we don't have space for the new entry & leaf ...
@@ -225,7 +225,7 @@ xfs_dir2_block_addname(
 		 * Not trying to actually do anything, or don't have
 		 * a space reservation: return no-space.
 		 */
-		if (args->justcheck || args->total == 0)
+		if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || args->total == 0)
 			return XFS_ERROR(ENOSPC);
 		/*
 		 * Convert to the next larger format.
@@ -240,7 +240,7 @@ xfs_dir2_block_addname(
 	/*
 	 * Just checking, and it would work, so say so.
 	 */
-	if (args->justcheck)
+	if (args->op_flags & XFS_DA_OP_JUSTCHECK)
 		return 0;
 	needlog = needscan = 0;
 	/*
@@ -610,14 +610,15 @@ xfs_dir2_block_lookup(
 	/*
 	 * Get the offset from the leaf entry, to point to the data.
 	 */
-	dep = (xfs_dir2_data_entry_t *)
-	      ((char *)block + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(blp[ent].address)));
+	dep = (xfs_dir2_data_entry_t *)((char *)block +
+		xfs_dir2_dataptr_to_off(mp, be32_to_cpu(blp[ent].address)));
 	/*
-	 * Fill in inode number, release the block.
+	 * Fill in inode number, CI name if appropriate, release the block.
 	 */
 	args->inumber = be64_to_cpu(dep->inumber);
+	error = xfs_dir_cilookup_result(args, dep->name, dep->namelen);
 	xfs_da_brelse(args->trans, bp);
-	return XFS_ERROR(EEXIST);
+	return XFS_ERROR(error);
 }
 
 /*
@@ -643,6 +644,7 @@ xfs_dir2_block_lookup_int(
 	int			mid;		/* binary search current idx */
 	xfs_mount_t		*mp;		/* filesystem mount point */
 	xfs_trans_t		*tp;		/* transaction pointer */
+	enum xfs_dacmp		cmp;		/* comparison result */
 
 	dp = args->dp;
 	tp = args->trans;
@@ -673,7 +675,7 @@ xfs_dir2_block_lookup_int(
 		else
 			high = mid - 1;
 		if (low > high) {
-			ASSERT(args->oknoent);
+			ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
 			xfs_da_brelse(tp, bp);
 			return XFS_ERROR(ENOENT);
 		}
@@ -697,20 +699,31 @@ xfs_dir2_block_lookup_int(
 		dep = (xfs_dir2_data_entry_t *)
 			((char *)block + xfs_dir2_dataptr_to_off(mp, addr));
 		/*
-		 * Compare, if it's right give back buffer & entry number.
+		 * Compare name and if it's an exact match, return the index
+		 * and buffer. If it's the first case-insensitive match, store
+		 * the index and buffer and continue looking for an exact match.
 		 */
-		if (dep->namelen == args->namelen &&
-		    dep->name[0] == args->name[0] &&
-		    memcmp(dep->name, args->name, args->namelen) == 0) {
+		cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen);
+		if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) {
+			args->cmpresult = cmp;
 			*bpp = bp;
 			*entno = mid;
-			return 0;
+			if (cmp == XFS_CMP_EXACT)
+				return 0;
 		}
-	} while (++mid < be32_to_cpu(btp->count) && be32_to_cpu(blp[mid].hashval) == hash);
+	} while (++mid < be32_to_cpu(btp->count) &&
+			be32_to_cpu(blp[mid].hashval) == hash);
+
+	ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
+	/*
+	 * Here, we can only be doing a lookup (not a rename or replace).
+	 * If a case-insensitive match was found earlier, return success.
+	 */
+	if (args->cmpresult == XFS_CMP_CASE)
+		return 0;
 	/*
 	 * No match, release the buffer and return ENOENT.
 	 */
-	ASSERT(args->oknoent);
 	xfs_da_brelse(tp, bp);
 	return XFS_ERROR(ENOENT);
 }
@@ -1033,6 +1046,7 @@ xfs_dir2_sf_to_block(
 	xfs_dir2_sf_t		*sfp;		/* shortform structure */
 	__be16			*tagp;		/* end of data entry */
 	xfs_trans_t		*tp;		/* transaction pointer */
+	struct xfs_name		name;
 
 	xfs_dir2_trace_args("sf_to_block", args);
 	dp = args->dp;
@@ -1071,7 +1085,7 @@ xfs_dir2_sf_to_block(
 	 */
 	error = xfs_dir2_grow_inode(args, XFS_DIR2_DATA_SPACE, &blkno);
 	if (error) {
-		kmem_free(buf, buf_len);
+		kmem_free(buf);
 		return error;
 	}
 	/*
@@ -1079,7 +1093,7 @@ xfs_dir2_sf_to_block(
 	 */
 	error = xfs_dir2_data_init(args, blkno, &bp);
 	if (error) {
-		kmem_free(buf, buf_len);
+		kmem_free(buf);
 		return error;
 	}
 	block = bp->data;
@@ -1187,8 +1201,10 @@ xfs_dir2_sf_to_block(
 		tagp = xfs_dir2_data_entry_tag_p(dep);
 		*tagp = cpu_to_be16((char *)dep - (char *)block);
 		xfs_dir2_data_log_entry(tp, bp, dep);
-		blp[2 + i].hashval = cpu_to_be32(xfs_da_hashname(
-					(char *)sfep->name, sfep->namelen));
+		name.name = sfep->name;
+		name.len = sfep->namelen;
+		blp[2 + i].hashval = cpu_to_be32(mp->m_dirnameops->
+							hashname(&name));
 		blp[2 + i].address = cpu_to_be32(xfs_dir2_byte_to_dataptr(mp,
 						 (char *)dep - (char *)block));
 		offset = (int)((char *)(tagp + 1) - (char *)block);
@@ -1198,7 +1214,7 @@ xfs_dir2_sf_to_block(
 			sfep = xfs_dir2_sf_nextentry(sfp, sfep);
 	}
 	/* Done with the temporary buffer */
-	kmem_free(buf, buf_len);
+	kmem_free(buf);
 	/*
 	 * Sort the leaf entries by hash value.
 	 */
diff --git a/fs/xfs/xfs_dir2_data.c b/fs/xfs/xfs_dir2_data.c
index fb8c9e08b23..498f8d69433 100644
--- a/fs/xfs/xfs_dir2_data.c
+++ b/fs/xfs/xfs_dir2_data.c
@@ -65,6 +65,7 @@ xfs_dir2_data_check(
 	xfs_mount_t		*mp;		/* filesystem mount point */
 	char			*p;		/* current data position */
 	int			stale;		/* count of stale leaves */
+	struct xfs_name		name;
 
 	mp = dp->i_mount;
 	d = bp->data;
@@ -140,7 +141,9 @@ xfs_dir2_data_check(
 			addr = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk,
 				(xfs_dir2_data_aoff_t)
 				((char *)dep - (char *)d));
-			hash = xfs_da_hashname((char *)dep->name, dep->namelen);
+			name.name = dep->name;
+			name.len = dep->namelen;
+			hash = mp->m_dirnameops->hashname(&name);
 			for (i = 0; i < be32_to_cpu(btp->count); i++) {
 				if (be32_to_cpu(lep[i].address) == addr &&
 				    be32_to_cpu(lep[i].hashval) == hash)
diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c
index bc52b803d79..93535992cb6 100644
--- a/fs/xfs/xfs_dir2_leaf.c
+++ b/fs/xfs/xfs_dir2_leaf.c
@@ -263,20 +263,21 @@ xfs_dir2_leaf_addname(
 	 * If we don't have enough free bytes but we can make enough
 	 * by compacting out stale entries, we'll do that.
 	 */
-	if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] < needbytes &&
-	    be16_to_cpu(leaf->hdr.stale) > 1) {
+	if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] <
+				needbytes && be16_to_cpu(leaf->hdr.stale) > 1) {
 		compact = 1;
 	}
 	/*
 	 * Otherwise if we don't have enough free bytes we need to
 	 * convert to node form.
 	 */
-	else if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] <
-		 needbytes) {
+	else if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(
+						leaf->hdr.count)] < needbytes) {
 		/*
 		 * Just checking or no space reservation, give up.
 		 */
-		if (args->justcheck || args->total == 0) {
+		if ((args->op_flags & XFS_DA_OP_JUSTCHECK) ||
+							args->total == 0) {
 			xfs_da_brelse(tp, lbp);
 			return XFS_ERROR(ENOSPC);
 		}
@@ -301,7 +302,7 @@ xfs_dir2_leaf_addname(
 	 * If just checking, then it will fit unless we needed to allocate
 	 * a new data block.
 	 */
-	if (args->justcheck) {
+	if (args->op_flags & XFS_DA_OP_JUSTCHECK) {
 		xfs_da_brelse(tp, lbp);
 		return use_block == -1 ? XFS_ERROR(ENOSPC) : 0;
 	}
@@ -1110,7 +1111,7 @@ xfs_dir2_leaf_getdents(
 		*offset = XFS_DIR2_MAX_DATAPTR;
 	else
 		*offset = xfs_dir2_byte_to_dataptr(mp, curoff);
-	kmem_free(map, map_size * sizeof(*map));
+	kmem_free(map);
 	if (bp)
 		xfs_da_brelse(NULL, bp);
 	return error;
@@ -1298,12 +1299,13 @@ xfs_dir2_leaf_lookup(
 	      ((char *)dbp->data +
 	       xfs_dir2_dataptr_to_off(dp->i_mount, be32_to_cpu(lep->address)));
 	/*
-	 * Return the found inode number.
+	 * Return the found inode number & CI name if appropriate
 	 */
 	args->inumber = be64_to_cpu(dep->inumber);
+	error = xfs_dir_cilookup_result(args, dep->name, dep->namelen);
 	xfs_da_brelse(tp, dbp);
 	xfs_da_brelse(tp, lbp);
-	return XFS_ERROR(EEXIST);
+	return XFS_ERROR(error);
 }
 
 /*
@@ -1319,8 +1321,8 @@ xfs_dir2_leaf_lookup_int(
 	int			*indexp,	/* out: index in leaf block */
 	xfs_dabuf_t		**dbpp)		/* out: data buffer */
 {
-	xfs_dir2_db_t		curdb;		/* current data block number */
-	xfs_dabuf_t		*dbp;		/* data buffer */
+	xfs_dir2_db_t		curdb = -1;	/* current data block number */
+	xfs_dabuf_t		*dbp = NULL;	/* data buffer */
 	xfs_dir2_data_entry_t	*dep;		/* data entry */
 	xfs_inode_t		*dp;		/* incore directory inode */
 	int			error;		/* error return code */
@@ -1331,6 +1333,8 @@ xfs_dir2_leaf_lookup_int(
 	xfs_mount_t		*mp;		/* filesystem mount point */
 	xfs_dir2_db_t		newdb;		/* new data block number */
 	xfs_trans_t		*tp;		/* transaction pointer */
+	xfs_dir2_db_t		cidb = -1;	/* case match data block no. */
+	enum xfs_dacmp		cmp;		/* name compare result */
 
 	dp = args->dp;
 	tp = args->trans;
@@ -1338,11 +1342,10 @@ xfs_dir2_leaf_lookup_int(
 	/*
 	 * Read the leaf block into the buffer.
 	 */
-	if ((error =
-	    xfs_da_read_buf(tp, dp, mp->m_dirleafblk, -1, &lbp,
-		    XFS_DATA_FORK))) {
+	error = xfs_da_read_buf(tp, dp, mp->m_dirleafblk, -1, &lbp,
+							XFS_DATA_FORK);
+	if (error)
 		return error;
-	}
 	*lbpp = lbp;
 	leaf = lbp->data;
 	xfs_dir2_leaf_check(dp, lbp);
@@ -1354,9 +1357,9 @@ xfs_dir2_leaf_lookup_int(
 	 * Loop over all the entries with the right hash value
 	 * looking to match the name.
 	 */
-	for (lep = &leaf->ents[index], dbp = NULL, curdb = -1;
-	     index < be16_to_cpu(leaf->hdr.count) && be32_to_cpu(lep->hashval) == args->hashval;
-	     lep++, index++) {
+	for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) &&
+				be32_to_cpu(lep->hashval) == args->hashval;
+				lep++, index++) {
 		/*
 		 * Skip over stale leaf entries.
 		 */
@@ -1373,10 +1376,10 @@ xfs_dir2_leaf_lookup_int(
 		if (newdb != curdb) {
 			if (dbp)
 				xfs_da_brelse(tp, dbp);
-			if ((error =
-			    xfs_da_read_buf(tp, dp,
-				    xfs_dir2_db_to_da(mp, newdb), -1, &dbp,
-				    XFS_DATA_FORK))) {
+			error = xfs_da_read_buf(tp, dp,
+						xfs_dir2_db_to_da(mp, newdb),
+						-1, &dbp, XFS_DATA_FORK);
+			if (error) {
 				xfs_da_brelse(tp, lbp);
 				return error;
 			}
@@ -1386,24 +1389,50 @@ xfs_dir2_leaf_lookup_int(
 		/*
 		 * Point to the data entry.
 		 */
-		dep = (xfs_dir2_data_entry_t *)
-		      ((char *)dbp->data +
-		       xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address)));
+		dep = (xfs_dir2_data_entry_t *)((char *)dbp->data +
+			xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address)));
 		/*
-		 * If it matches then return it.
+		 * Compare name and if it's an exact match, return the index
+		 * and buffer. If it's the first case-insensitive match, store
+		 * the index and buffer and continue looking for an exact match.
 		 */
-		if (dep->namelen == args->namelen &&
-		    dep->name[0] == args->name[0] &&
-		    memcmp(dep->name, args->name, args->namelen) == 0) {
-			*dbpp = dbp;
+		cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen);
+		if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) {
+			args->cmpresult = cmp;
 			*indexp = index;
-			return 0;
+			/* case exact match: return the current buffer. */
+			if (cmp == XFS_CMP_EXACT) {
+				*dbpp = dbp;
+				return 0;
+			}
+			cidb = curdb;
 		}
 	}
+	ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
+	/*
+	 * Here, we can only be doing a lookup (not a rename or remove).
+	 * If a case-insensitive match was found earlier, re-read the
+	 * appropriate data block if required and return it.
+	 */
+	if (args->cmpresult == XFS_CMP_CASE) {
+		ASSERT(cidb != -1);
+		if (cidb != curdb) {
+			xfs_da_brelse(tp, dbp);
+			error = xfs_da_read_buf(tp, dp,
+						xfs_dir2_db_to_da(mp, cidb),
+						-1, &dbp, XFS_DATA_FORK);
+			if (error) {
+				xfs_da_brelse(tp, lbp);
+				return error;
+			}
+		}
+		*dbpp = dbp;
+		return 0;
+	}
 	/*
 	 * No match found, return ENOENT.
 	 */
-	ASSERT(args->oknoent);
+	ASSERT(cidb == -1);
 	if (dbp)
 		xfs_da_brelse(tp, dbp);
 	xfs_da_brelse(tp, lbp);
diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c
index 8dade711f09..fa6c3a5ddbc 100644
--- a/fs/xfs/xfs_dir2_node.c
+++ b/fs/xfs/xfs_dir2_node.c
@@ -226,7 +226,7 @@ xfs_dir2_leafn_add(
 	ASSERT(index == be16_to_cpu(leaf->hdr.count) ||
 	       be32_to_cpu(leaf->ents[index].hashval) >= args->hashval);
 
-	if (args->justcheck)
+	if (args->op_flags & XFS_DA_OP_JUSTCHECK)
 		return 0;
 
 	/*
@@ -387,28 +387,26 @@ xfs_dir2_leafn_lasthash(
 }
 
 /*
- * Look up a leaf entry in a node-format leaf block.
- * If this is an addname then the extrablk in state is a freespace block,
- * otherwise it's a data block.
+ * Look up a leaf entry for space to add a name in a node-format leaf block.
+ * The extrablk in state is a freespace block.
  */
-int
-xfs_dir2_leafn_lookup_int(
+STATIC int
+xfs_dir2_leafn_lookup_for_addname(
 	xfs_dabuf_t		*bp,		/* leaf buffer */
 	xfs_da_args_t		*args,		/* operation arguments */
 	int			*indexp,	/* out: leaf entry index */
 	xfs_da_state_t		*state)		/* state to fill in */
 {
-	xfs_dabuf_t		*curbp;		/* current data/free buffer */
-	xfs_dir2_db_t		curdb;		/* current data block number */
-	xfs_dir2_db_t		curfdb;		/* current free block number */
-	xfs_dir2_data_entry_t	*dep;		/* data block entry */
+	xfs_dabuf_t		*curbp = NULL;	/* current data/free buffer */
+	xfs_dir2_db_t		curdb = -1;	/* current data block number */
+	xfs_dir2_db_t		curfdb = -1;	/* current free block number */
 	xfs_inode_t		*dp;		/* incore directory inode */
 	int			error;		/* error return value */
 	int			fi;		/* free entry index */
-	xfs_dir2_free_t		*free=NULL;	/* free block structure */
+	xfs_dir2_free_t		*free = NULL;	/* free block structure */
 	int			index;		/* leaf entry index */
 	xfs_dir2_leaf_t		*leaf;		/* leaf structure */
-	int			length=0;	/* length of new data entry */
+	int			length;		/* length of new data entry */
 	xfs_dir2_leaf_entry_t	*lep;		/* leaf entry */
 	xfs_mount_t		*mp;		/* filesystem mount point */
 	xfs_dir2_db_t		newdb;		/* new data block number */
@@ -431,33 +429,20 @@ xfs_dir2_leafn_lookup_int(
 	/*
 	 * Do we have a buffer coming in?
 	 */
-	if (state->extravalid)
+	if (state->extravalid) {
+		/* If so, it's a free block buffer, get the block number. */
 		curbp = state->extrablk.bp;
-	else
-		curbp = NULL;
-	/*
-	 * For addname, it's a free block buffer, get the block number.
-	 */
-	if (args->addname) {
-		curfdb = curbp ? state->extrablk.blkno : -1;
-		curdb = -1;
-		length = xfs_dir2_data_entsize(args->namelen);
-		if ((free = (curbp ? curbp->data : NULL)))
-			ASSERT(be32_to_cpu(free->hdr.magic) == XFS_DIR2_FREE_MAGIC);
-	}
-	/*
-	 * For others, it's a data block buffer, get the block number.
-	 */
-	else {
-		curfdb = -1;
-		curdb = curbp ? state->extrablk.blkno : -1;
+		curfdb = state->extrablk.blkno;
+		free = curbp->data;
+		ASSERT(be32_to_cpu(free->hdr.magic) == XFS_DIR2_FREE_MAGIC);
 	}
+	length = xfs_dir2_data_entsize(args->namelen);
 	/*
 	 * Loop over leaf entries with the right hash value.
 	 */
-	for (lep = &leaf->ents[index];
-	     index < be16_to_cpu(leaf->hdr.count) && be32_to_cpu(lep->hashval) == args->hashval;
-	     lep++, index++) {
+	for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) &&
+				be32_to_cpu(lep->hashval) == args->hashval;
+				lep++, index++) {
 		/*
 		 * Skip stale leaf entries.
 		 */
@@ -471,161 +456,244 @@ xfs_dir2_leafn_lookup_int(
 		 * For addname, we're looking for a place to put the new entry.
 		 * We want to use a data block with an entry of equal
 		 * hash value to ours if there is one with room.
+		 *
+		 * If this block isn't the data block we already have
+		 * in hand, take a look at it.
 		 */
-		if (args->addname) {
+		if (newdb != curdb) {
+			curdb = newdb;
 			/*
-			 * If this block isn't the data block we already have
-			 * in hand, take a look at it.
+			 * Convert the data block to the free block
+			 * holding its freespace information.
 			 */
-			if (newdb != curdb) {
-				curdb = newdb;
-				/*
-				 * Convert the data block to the free block
-				 * holding its freespace information.
-				 */
-				newfdb = xfs_dir2_db_to_fdb(mp, newdb);
-				/*
-				 * If it's not the one we have in hand,
-				 * read it in.
-				 */
-				if (newfdb != curfdb) {
-					/*
-					 * If we had one before, drop it.
-					 */
-					if (curbp)
-						xfs_da_brelse(tp, curbp);
-					/*
-					 * Read the free block.
-					 */
-					if ((error = xfs_da_read_buf(tp, dp,
-							xfs_dir2_db_to_da(mp,
-								newfdb),
-							-1, &curbp,
-							XFS_DATA_FORK))) {
-						return error;
-					}
-					free = curbp->data;
-					ASSERT(be32_to_cpu(free->hdr.magic) ==
-					       XFS_DIR2_FREE_MAGIC);
-					ASSERT((be32_to_cpu(free->hdr.firstdb) %
-						XFS_DIR2_MAX_FREE_BESTS(mp)) ==
-					       0);
-					ASSERT(be32_to_cpu(free->hdr.firstdb) <= curdb);
-					ASSERT(curdb <
-					       be32_to_cpu(free->hdr.firstdb) +
-					       be32_to_cpu(free->hdr.nvalid));
-				}
-				/*
-				 * Get the index for our entry.
-				 */
-				fi = xfs_dir2_db_to_fdindex(mp, curdb);
-				/*
-				 * If it has room, return it.
-				 */
-				if (unlikely(be16_to_cpu(free->bests[fi]) == NULLDATAOFF)) {
-					XFS_ERROR_REPORT("xfs_dir2_leafn_lookup_int",
-							 XFS_ERRLEVEL_LOW, mp);
-					if (curfdb != newfdb)
-						xfs_da_brelse(tp, curbp);
-					return XFS_ERROR(EFSCORRUPTED);
-				}
-				curfdb = newfdb;
-				if (be16_to_cpu(free->bests[fi]) >= length) {
-					*indexp = index;
-					state->extravalid = 1;
-					state->extrablk.bp = curbp;
-					state->extrablk.blkno = curfdb;
-					state->extrablk.index = fi;
-					state->extrablk.magic =
-						XFS_DIR2_FREE_MAGIC;
-					ASSERT(args->oknoent);
-					return XFS_ERROR(ENOENT);
-				}
-			}
-		}
-		/*
-		 * Not adding a new entry, so we really want to find
-		 * the name given to us.
-		 */
-		else {
+			newfdb = xfs_dir2_db_to_fdb(mp, newdb);
 			/*
-			 * If it's a different data block, go get it.
+			 * If it's not the one we have in hand, read it in.
 			 */
-			if (newdb != curdb) {
+			if (newfdb != curfdb) {
 				/*
-				 * If we had a block before, drop it.
+				 * If we had one before, drop it.
 				 */
 				if (curbp)
 					xfs_da_brelse(tp, curbp);
 				/*
-				 * Read the data block.
+				 * Read the free block.
 				 */
-				if ((error =
-				    xfs_da_read_buf(tp, dp,
-					    xfs_dir2_db_to_da(mp, newdb), -1,
-					    &curbp, XFS_DATA_FORK))) {
+				error = xfs_da_read_buf(tp, dp,
+						xfs_dir2_db_to_da(mp, newfdb),
+						-1, &curbp, XFS_DATA_FORK);
+				if (error)
 					return error;
-				}
-				xfs_dir2_data_check(dp, curbp);
-				curdb = newdb;
+				free = curbp->data;
+				ASSERT(be32_to_cpu(free->hdr.magic) ==
+					XFS_DIR2_FREE_MAGIC);
+				ASSERT((be32_to_cpu(free->hdr.firstdb) %
+					XFS_DIR2_MAX_FREE_BESTS(mp)) == 0);
+				ASSERT(be32_to_cpu(free->hdr.firstdb) <= curdb);
+				ASSERT(curdb < be32_to_cpu(free->hdr.firstdb) +
+					be32_to_cpu(free->hdr.nvalid));
 			}
 			/*
-			 * Point to the data entry.
+			 * Get the index for our entry.
 			 */
-			dep = (xfs_dir2_data_entry_t *)
-			      ((char *)curbp->data +
-			       xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address)));
+			fi = xfs_dir2_db_to_fdindex(mp, curdb);
 			/*
-			 * Compare the entry, return it if it matches.
+			 * If it has room, return it.
 			 */
-			if (dep->namelen == args->namelen &&
-			    dep->name[0] == args->name[0] &&
-			    memcmp(dep->name, args->name, args->namelen) == 0) {
-				args->inumber = be64_to_cpu(dep->inumber);
-				*indexp = index;
-				state->extravalid = 1;
-				state->extrablk.bp = curbp;
-				state->extrablk.blkno = curdb;
-				state->extrablk.index =
-					(int)((char *)dep -
-					      (char *)curbp->data);
-				state->extrablk.magic = XFS_DIR2_DATA_MAGIC;
-				return XFS_ERROR(EEXIST);
+			if (unlikely(be16_to_cpu(free->bests[fi]) == NULLDATAOFF)) {
+				XFS_ERROR_REPORT("xfs_dir2_leafn_lookup_int",
+							XFS_ERRLEVEL_LOW, mp);
+				if (curfdb != newfdb)
+					xfs_da_brelse(tp, curbp);
+				return XFS_ERROR(EFSCORRUPTED);
 			}
+			curfdb = newfdb;
+			if (be16_to_cpu(free->bests[fi]) >= length)
+				goto out;
 		}
 	}
+	/* Didn't find any space */
+	fi = -1;
+out:
+	ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
+	if (curbp) {
+		/* Giving back a free block. */
+		state->extravalid = 1;
+		state->extrablk.bp = curbp;
+		state->extrablk.index = fi;
+		state->extrablk.blkno = curfdb;
+		state->extrablk.magic = XFS_DIR2_FREE_MAGIC;
+	} else {
+		state->extravalid = 0;
+	}
 	/*
-	 * Didn't find a match.
-	 * If we are holding a buffer, give it back in case our caller
-	 * finds it useful.
+	 * Return the index, that will be the insertion point.
 	 */
-	if ((state->extravalid = (curbp != NULL))) {
-		state->extrablk.bp = curbp;
-		state->extrablk.index = -1;
+	*indexp = index;
+	return XFS_ERROR(ENOENT);
+}
+
+/*
+ * Look up a leaf entry in a node-format leaf block.
+ * The extrablk in state a data block.
+ */
+STATIC int
+xfs_dir2_leafn_lookup_for_entry(
+	xfs_dabuf_t		*bp,		/* leaf buffer */
+	xfs_da_args_t		*args,		/* operation arguments */
+	int			*indexp,	/* out: leaf entry index */
+	xfs_da_state_t		*state)		/* state to fill in */
+{
+	xfs_dabuf_t		*curbp = NULL;	/* current data/free buffer */
+	xfs_dir2_db_t		curdb = -1;	/* current data block number */
+	xfs_dir2_data_entry_t	*dep;		/* data block entry */
+	xfs_inode_t		*dp;		/* incore directory inode */
+	int			error;		/* error return value */
+	int			index;		/* leaf entry index */
+	xfs_dir2_leaf_t		*leaf;		/* leaf structure */
+	xfs_dir2_leaf_entry_t	*lep;		/* leaf entry */
+	xfs_mount_t		*mp;		/* filesystem mount point */
+	xfs_dir2_db_t		newdb;		/* new data block number */
+	xfs_trans_t		*tp;		/* transaction pointer */
+	enum xfs_dacmp		cmp;		/* comparison result */
+
+	dp = args->dp;
+	tp = args->trans;
+	mp = dp->i_mount;
+	leaf = bp->data;
+	ASSERT(be16_to_cpu(leaf->hdr.info.magic) == XFS_DIR2_LEAFN_MAGIC);
+#ifdef __KERNEL__
+	ASSERT(be16_to_cpu(leaf->hdr.count) > 0);
+#endif
+	xfs_dir2_leafn_check(dp, bp);
+	/*
+	 * Look up the hash value in the leaf entries.
+	 */
+	index = xfs_dir2_leaf_search_hash(args, bp);
+	/*
+	 * Do we have a buffer coming in?
+	 */
+	if (state->extravalid) {
+		curbp = state->extrablk.bp;
+		curdb = state->extrablk.blkno;
+	}
+	/*
+	 * Loop over leaf entries with the right hash value.
+	 */
+	for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) &&
+				be32_to_cpu(lep->hashval) == args->hashval;
+				lep++, index++) {
 		/*
-		 * For addname, giving back a free block.
+		 * Skip stale leaf entries.
 		 */
-		if (args->addname) {
-			state->extrablk.blkno = curfdb;
-			state->extrablk.magic = XFS_DIR2_FREE_MAGIC;
+		if (be32_to_cpu(lep->address) == XFS_DIR2_NULL_DATAPTR)
+			continue;
+		/*
+		 * Pull the data block number from the entry.
+		 */
+		newdb = xfs_dir2_dataptr_to_db(mp, be32_to_cpu(lep->address));
+		/*
+		 * Not adding a new entry, so we really want to find
+		 * the name given to us.
+		 *
+		 * If it's a different data block, go get it.
+		 */
+		if (newdb != curdb) {
+			/*
+			 * If we had a block before that we aren't saving
+			 * for a CI name, drop it
+			 */
+			if (curbp && (args->cmpresult == XFS_CMP_DIFFERENT ||
+						curdb != state->extrablk.blkno))
+				xfs_da_brelse(tp, curbp);
+			/*
+			 * If needing the block that is saved with a CI match,
+			 * use it otherwise read in the new data block.
+			 */
+			if (args->cmpresult != XFS_CMP_DIFFERENT &&
+					newdb == state->extrablk.blkno) {
+				ASSERT(state->extravalid);
+				curbp = state->extrablk.bp;
+			} else {
+				error = xfs_da_read_buf(tp, dp,
+						xfs_dir2_db_to_da(mp, newdb),
+						-1, &curbp, XFS_DATA_FORK);
+				if (error)
+					return error;
+			}
+			xfs_dir2_data_check(dp, curbp);
+			curdb = newdb;
 		}
 		/*
-		 * For other callers, giving back a data block.
+		 * Point to the data entry.
 		 */
-		else {
+		dep = (xfs_dir2_data_entry_t *)((char *)curbp->data +
+			xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address)));
+		/*
+		 * Compare the entry and if it's an exact match, return
+		 * EEXIST immediately. If it's the first case-insensitive
+		 * match, store the block & inode number and continue looking.
+		 */
+		cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen);
+		if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) {
+			/* If there is a CI match block, drop it */
+			if (args->cmpresult != XFS_CMP_DIFFERENT &&
+						curdb != state->extrablk.blkno)
+				xfs_da_brelse(tp, state->extrablk.bp);
+			args->cmpresult = cmp;
+			args->inumber = be64_to_cpu(dep->inumber);
+			*indexp = index;
+			state->extravalid = 1;
+			state->extrablk.bp = curbp;
 			state->extrablk.blkno = curdb;
+			state->extrablk.index = (int)((char *)dep -
+							(char *)curbp->data);
 			state->extrablk.magic = XFS_DIR2_DATA_MAGIC;
+			if (cmp == XFS_CMP_EXACT)
+				return XFS_ERROR(EEXIST);
 		}
 	}
-	/*
-	 * Return the final index, that will be the insertion point.
-	 */
+	ASSERT(index == be16_to_cpu(leaf->hdr.count) ||
+					(args->op_flags & XFS_DA_OP_OKNOENT));
+	if (curbp) {
+		if (args->cmpresult == XFS_CMP_DIFFERENT) {
+			/* Giving back last used data block. */
+			state->extravalid = 1;
+			state->extrablk.bp = curbp;
+			state->extrablk.index = -1;
+			state->extrablk.blkno = curdb;
+			state->extrablk.magic = XFS_DIR2_DATA_MAGIC;
+		} else {
+			/* If the curbp is not the CI match block, drop it */
+			if (state->extrablk.bp != curbp)
+				xfs_da_brelse(tp, curbp);
+		}
+	} else {
+		state->extravalid = 0;
+	}
 	*indexp = index;
-	ASSERT(index == be16_to_cpu(leaf->hdr.count) || args->oknoent);
 	return XFS_ERROR(ENOENT);
 }
 
 /*
+ * Look up a leaf entry in a node-format leaf block.
+ * If this is an addname then the extrablk in state is a freespace block,
+ * otherwise it's a data block.
+ */
+int
+xfs_dir2_leafn_lookup_int(
+	xfs_dabuf_t		*bp,		/* leaf buffer */
+	xfs_da_args_t		*args,		/* operation arguments */
+	int			*indexp,	/* out: leaf entry index */
+	xfs_da_state_t		*state)		/* state to fill in */
+{
+	if (args->op_flags & XFS_DA_OP_ADDNAME)
+		return xfs_dir2_leafn_lookup_for_addname(bp, args, indexp,
+							state);
+	return xfs_dir2_leafn_lookup_for_entry(bp, args, indexp, state);
+}
+
+/*
  * Move count leaf entries from source to destination leaf.
  * Log entries and headers.  Stale entries are preserved.
  */
@@ -823,9 +891,10 @@ xfs_dir2_leafn_rebalance(
 	 */
 	if (!state->inleaf)
 		blk2->index = blk1->index - be16_to_cpu(leaf1->hdr.count);
-	
-	/* 
-	 * Finally sanity check just to make sure we are not returning a negative index 
+
+	/*
+	 * Finally sanity check just to make sure we are not returning a
+	 * negative index
 	 */
 	if(blk2->index < 0) {
 		state->inleaf = 1;
@@ -1332,7 +1401,7 @@ xfs_dir2_node_addname(
 		/*
 		 * It worked, fix the hash values up the btree.
 		 */
-		if (!args->justcheck)
+		if (!(args->op_flags & XFS_DA_OP_JUSTCHECK))
 			xfs_da_fixhashpath(state, &state->path);
 	} else {
 		/*
@@ -1515,7 +1584,8 @@ xfs_dir2_node_addname_int(
 		/*
 		 * Not allowed to allocate, return failure.
 		 */
-		if (args->justcheck || args->total == 0) {
+		if ((args->op_flags & XFS_DA_OP_JUSTCHECK) ||
+							args->total == 0) {
 			/*
 			 * Drop the freespace buffer unless it came from our
 			 * caller.
@@ -1661,7 +1731,7 @@ xfs_dir2_node_addname_int(
 		/*
 		 * If just checking, we succeeded.
 		 */
-		if (args->justcheck) {
+		if (args->op_flags & XFS_DA_OP_JUSTCHECK) {
 			if ((fblk == NULL || fblk->bp == NULL) && fbp != NULL)
 				xfs_da_buf_done(fbp);
 			return 0;
@@ -1767,6 +1837,14 @@ xfs_dir2_node_lookup(
 	error = xfs_da_node_lookup_int(state, &rval);
 	if (error)
 		rval = error;
+	else if (rval == ENOENT && args->cmpresult == XFS_CMP_CASE) {
+		/* If a CI match, dup the actual name and return EEXIST */
+		xfs_dir2_data_entry_t	*dep;
+
+		dep = (xfs_dir2_data_entry_t *)((char *)state->extrablk.bp->
+						data + state->extrablk.index);
+		rval = xfs_dir_cilookup_result(args, dep->name, dep->namelen);
+	}
 	/*
 	 * Release the btree blocks and leaf block.
 	 */
@@ -1810,9 +1888,8 @@ xfs_dir2_node_removename(
 	 * Look up the entry we're deleting, set up the cursor.
 	 */
 	error = xfs_da_node_lookup_int(state, &rval);
-	if (error) {
+	if (error)
 		rval = error;
-	}
 	/*
 	 * Didn't find it, upper layer screwed up.
 	 */
@@ -1829,9 +1906,8 @@ xfs_dir2_node_removename(
 	 */
 	error = xfs_dir2_leafn_remove(args, blk->bp, blk->index,
 		&state->extrablk, &rval);
-	if (error) {
+	if (error)
 		return error;
-	}
 	/*
 	 * Fix the hash values up the btree.
 	 */
diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c
index 919d275a1ce..b46af0013ec 100644
--- a/fs/xfs/xfs_dir2_sf.c
+++ b/fs/xfs/xfs_dir2_sf.c
@@ -255,7 +255,7 @@ xfs_dir2_block_to_sf(
 	xfs_dir2_sf_check(args);
 out:
 	xfs_trans_log_inode(args->trans, dp, logflags);
-	kmem_free(block, mp->m_dirblksize);
+	kmem_free(block);
 	return error;
 }
 
@@ -332,7 +332,7 @@ xfs_dir2_sf_addname(
 		/*
 		 * Just checking or no space reservation, it doesn't fit.
 		 */
-		if (args->justcheck || args->total == 0)
+		if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || args->total == 0)
 			return XFS_ERROR(ENOSPC);
 		/*
 		 * Convert to block form then add the name.
@@ -345,7 +345,7 @@ xfs_dir2_sf_addname(
 	/*
 	 * Just checking, it fits.
 	 */
-	if (args->justcheck)
+	if (args->op_flags & XFS_DA_OP_JUSTCHECK)
 		return 0;
 	/*
 	 * Do it the easy way - just add it at the end.
@@ -512,7 +512,7 @@ xfs_dir2_sf_addname_hard(
 		sfep = xfs_dir2_sf_nextentry(sfp, sfep);
 		memcpy(sfep, oldsfep, old_isize - nbytes);
 	}
-	kmem_free(buf, old_isize);
+	kmem_free(buf);
 	dp->i_d.di_size = new_isize;
 	xfs_dir2_sf_check(args);
 }
@@ -812,8 +812,11 @@ xfs_dir2_sf_lookup(
 {
 	xfs_inode_t		*dp;		/* incore directory inode */
 	int			i;		/* entry index */
+	int			error;
 	xfs_dir2_sf_entry_t	*sfep;		/* shortform directory entry */
 	xfs_dir2_sf_t		*sfp;		/* shortform structure */
+	enum xfs_dacmp		cmp;		/* comparison result */
+	xfs_dir2_sf_entry_t	*ci_sfep;	/* case-insens. entry */
 
 	xfs_dir2_trace_args("sf_lookup", args);
 	xfs_dir2_sf_check(args);
@@ -836,6 +839,7 @@ xfs_dir2_sf_lookup(
 	 */
 	if (args->namelen == 1 && args->name[0] == '.') {
 		args->inumber = dp->i_ino;
+		args->cmpresult = XFS_CMP_EXACT;
 		return XFS_ERROR(EEXIST);
 	}
 	/*
@@ -844,28 +848,41 @@ xfs_dir2_sf_lookup(
 	if (args->namelen == 2 &&
 	    args->name[0] == '.' && args->name[1] == '.') {
 		args->inumber = xfs_dir2_sf_get_inumber(sfp, &sfp->hdr.parent);
+		args->cmpresult = XFS_CMP_EXACT;
 		return XFS_ERROR(EEXIST);
 	}
 	/*
 	 * Loop over all the entries trying to match ours.
 	 */
-	for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp);
-	     i < sfp->hdr.count;
-	     i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
-		if (sfep->namelen == args->namelen &&
-		    sfep->name[0] == args->name[0] &&
-		    memcmp(args->name, sfep->name, args->namelen) == 0) {
-			args->inumber =
-				xfs_dir2_sf_get_inumber(sfp,
-					xfs_dir2_sf_inumberp(sfep));
-			return XFS_ERROR(EEXIST);
+	ci_sfep = NULL;
+	for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->hdr.count;
+				i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
+		/*
+		 * Compare name and if it's an exact match, return the inode
+		 * number. If it's the first case-insensitive match, store the
+		 * inode number and continue looking for an exact match.
+		 */
+		cmp = dp->i_mount->m_dirnameops->compname(args, sfep->name,
+								sfep->namelen);
+		if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) {
+			args->cmpresult = cmp;
+			args->inumber = xfs_dir2_sf_get_inumber(sfp,
+						xfs_dir2_sf_inumberp(sfep));
+			if (cmp == XFS_CMP_EXACT)
+				return XFS_ERROR(EEXIST);
+			ci_sfep = sfep;
 		}
 	}
+	ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
 	/*
-	 * Didn't find it.
+	 * Here, we can only be doing a lookup (not a rename or replace).
+	 * If a case-insensitive match was not found, return ENOENT.
 	 */
-	ASSERT(args->oknoent);
-	return XFS_ERROR(ENOENT);
+	if (!ci_sfep)
+		return XFS_ERROR(ENOENT);
+	/* otherwise process the CI match as required by the caller */
+	error = xfs_dir_cilookup_result(args, ci_sfep->name, ci_sfep->namelen);
+	return XFS_ERROR(error);
 }
 
 /*
@@ -904,24 +921,21 @@ xfs_dir2_sf_removename(
 	 * Loop over the old directory entries.
 	 * Find the one we're deleting.
 	 */
-	for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp);
-	     i < sfp->hdr.count;
-	     i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
-		if (sfep->namelen == args->namelen &&
-		    sfep->name[0] == args->name[0] &&
-		    memcmp(sfep->name, args->name, args->namelen) == 0) {
+	for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->hdr.count;
+				i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
+		if (xfs_da_compname(args, sfep->name, sfep->namelen) ==
+								XFS_CMP_EXACT) {
 			ASSERT(xfs_dir2_sf_get_inumber(sfp,
-					xfs_dir2_sf_inumberp(sfep)) ==
-				args->inumber);
+						xfs_dir2_sf_inumberp(sfep)) ==
+								args->inumber);
 			break;
 		}
 	}
 	/*
 	 * Didn't find it.
 	 */
-	if (i == sfp->hdr.count) {
+	if (i == sfp->hdr.count)
 		return XFS_ERROR(ENOENT);
-	}
 	/*
 	 * Calculate sizes.
 	 */
@@ -1042,11 +1056,10 @@ xfs_dir2_sf_replace(
 	 */
 	else {
 		for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp);
-		     i < sfp->hdr.count;
-		     i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
-			if (sfep->namelen == args->namelen &&
-			    sfep->name[0] == args->name[0] &&
-			    memcmp(args->name, sfep->name, args->namelen) == 0) {
+				i < sfp->hdr.count;
+				i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) {
+			if (xfs_da_compname(args, sfep->name, sfep->namelen) ==
+								XFS_CMP_EXACT) {
 #if XFS_BIG_INUMS || defined(DEBUG)
 				ino = xfs_dir2_sf_get_inumber(sfp,
 					xfs_dir2_sf_inumberp(sfep));
@@ -1061,7 +1074,7 @@ xfs_dir2_sf_replace(
 		 * Didn't find it.
 		 */
 		if (i == sfp->hdr.count) {
-			ASSERT(args->oknoent);
+			ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
 #if XFS_BIG_INUMS
 			if (i8elevated)
 				xfs_dir2_sf_toino4(args);
@@ -1174,7 +1187,7 @@ xfs_dir2_sf_toino4(
 	/*
 	 * Clean up the inode.
 	 */
-	kmem_free(buf, oldsize);
+	kmem_free(buf);
 	dp->i_d.di_size = newsize;
 	xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA);
 }
@@ -1251,7 +1264,7 @@ xfs_dir2_sf_toino8(
 	/*
 	 * Clean up the inode.
 	 */
-	kmem_free(buf, oldsize);
+	kmem_free(buf);
 	dp->i_d.di_size = newsize;
 	xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA);
 }
diff --git a/fs/xfs/xfs_dir2_sf.h b/fs/xfs/xfs_dir2_sf.h
index 005629d702d..deecc9d238f 100644
--- a/fs/xfs/xfs_dir2_sf.h
+++ b/fs/xfs/xfs_dir2_sf.h
@@ -62,7 +62,7 @@ typedef union {
  * Normalized offset (in a data block) of the entry, really xfs_dir2_data_off_t.
  * Only need 16 bits, this is the byte offset into the single block form.
  */
-typedef struct { __uint8_t i[2]; } xfs_dir2_sf_off_t;
+typedef struct { __uint8_t i[2]; } __arch_pack xfs_dir2_sf_off_t;
 
 /*
  * The parent directory has a dedicated field, and the self-pointer must
@@ -76,14 +76,14 @@ typedef struct xfs_dir2_sf_hdr {
 	__uint8_t		count;		/* count of entries */
 	__uint8_t		i8count;	/* count of 8-byte inode #s */
 	xfs_dir2_inou_t		parent;		/* parent dir inode number */
-} xfs_dir2_sf_hdr_t;
+} __arch_pack xfs_dir2_sf_hdr_t;
 
 typedef struct xfs_dir2_sf_entry {
 	__uint8_t		namelen;	/* actual name length */
 	xfs_dir2_sf_off_t	offset;		/* saved offset */
 	__uint8_t		name[1];	/* name, variable size */
 	xfs_dir2_inou_t		inumber;	/* inode number, var. offset */
-} xfs_dir2_sf_entry_t;
+} __arch_pack xfs_dir2_sf_entry_t; 
 
 typedef struct xfs_dir2_sf {
 	xfs_dir2_sf_hdr_t	hdr;		/* shortform header */
diff --git a/fs/xfs/xfs_dir2_trace.c b/fs/xfs/xfs_dir2_trace.c
index f3fb2ffd6f5..6cc7c0c681a 100644
--- a/fs/xfs/xfs_dir2_trace.c
+++ b/fs/xfs/xfs_dir2_trace.c
@@ -85,7 +85,8 @@ xfs_dir2_trace_args(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck, NULL, NULL);
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
+		NULL, NULL);
 }
 
 void
@@ -100,7 +101,7 @@ xfs_dir2_trace_args_b(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck,
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
 		(void *)(bp ? bp->bps[0] : NULL), NULL);
 }
 
@@ -117,7 +118,7 @@ xfs_dir2_trace_args_bb(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck,
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
 		(void *)(lbp ? lbp->bps[0] : NULL),
 		(void *)(dbp ? dbp->bps[0] : NULL));
 }
@@ -157,8 +158,8 @@ xfs_dir2_trace_args_db(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck, (void *)(long)db,
-		(void *)dbp);
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
+		(void *)(long)db, (void *)dbp);
 }
 
 void
@@ -173,7 +174,7 @@ xfs_dir2_trace_args_i(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck,
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
 		(void *)((unsigned long)(i >> 32)),
 		(void *)((unsigned long)(i & 0xFFFFFFFF)));
 }
@@ -190,7 +191,8 @@ xfs_dir2_trace_args_s(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck, (void *)(long)s, NULL);
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
+		(void *)(long)s, NULL);
 }
 
 void
@@ -208,7 +210,7 @@ xfs_dir2_trace_args_sb(
 		(void *)((unsigned long)(args->inumber >> 32)),
 		(void *)((unsigned long)(args->inumber & 0xFFFFFFFF)),
 		(void *)args->dp, (void *)args->trans,
-		(void *)(unsigned long)args->justcheck, (void *)(long)s,
-		(void *)dbp);
+		(void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK),
+		(void *)(long)s, (void *)dbp);
 }
 #endif	/* XFS_DIR2_TRACE */
diff --git a/fs/xfs/xfs_dmapi.h b/fs/xfs/xfs_dmapi.h
index f71784ab6a6..2813cdd7237 100644
--- a/fs/xfs/xfs_dmapi.h
+++ b/fs/xfs/xfs_dmapi.h
@@ -18,7 +18,6 @@
 #ifndef __XFS_DMAPI_H__
 #define __XFS_DMAPI_H__
 
-#include <linux/version.h>
 /*	Values used to define the on-disk version of dm_attrname_t. All
  *	on-disk attribute names start with the 8-byte string "SGI_DMI_".
  *
@@ -166,6 +165,6 @@ typedef enum {
 
 #define FILP_DELAY_FLAG(filp) ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) ? \
 			DM_FLAGS_NDELAY : 0)
-#define AT_DELAY_FLAG(f) ((f&ATTR_NONBLOCK) ? DM_FLAGS_NDELAY : 0)
+#define AT_DELAY_FLAG(f) ((f & XFS_ATTR_NONBLOCK) ? DM_FLAGS_NDELAY : 0)
 
 #endif  /* __XFS_DMAPI_H__ */
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index 05e5365d3c3..f227ecd1a29 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -58,22 +58,11 @@ xfs_error_trap(int e)
 	}
 	return e;
 }
-#endif
-
-#if (defined(DEBUG) || defined(INDUCE_IO_ERROR))
 
 int	xfs_etest[XFS_NUM_INJECT_ERROR];
 int64_t	xfs_etest_fsid[XFS_NUM_INJECT_ERROR];
 char *	xfs_etest_fsname[XFS_NUM_INJECT_ERROR];
 
-void
-xfs_error_test_init(void)
-{
-	memset(xfs_etest, 0, sizeof(xfs_etest));
-	memset(xfs_etest_fsid, 0, sizeof(xfs_etest_fsid));
-	memset(xfs_etest_fsname, 0, sizeof(xfs_etest_fsname));
-}
-
 int
 xfs_error_test(int error_tag, int *fsidp, char *expression,
 	       int line, char *file, unsigned long randfactor)
@@ -150,8 +139,7 @@ xfs_errortag_clearall(xfs_mount_t *mp, int loud)
 				xfs_etest[i]);
 			xfs_etest[i] = 0;
 			xfs_etest_fsid[i] = 0LL;
-			kmem_free(xfs_etest_fsname[i],
-				  strlen(xfs_etest_fsname[i]) + 1);
+			kmem_free(xfs_etest_fsname[i]);
 			xfs_etest_fsname[i] = NULL;
 		}
 	}
@@ -163,7 +151,7 @@ xfs_errortag_clearall(xfs_mount_t *mp, int loud)
 
 	return 0;
 }
-#endif /* DEBUG || INDUCE_IO_ERROR */
+#endif /* DEBUG */
 
 static void
 xfs_fs_vcmn_err(int level, xfs_mount_t *mp, char *fmt, va_list ap)
@@ -175,7 +163,7 @@ xfs_fs_vcmn_err(int level, xfs_mount_t *mp, char *fmt, va_list ap)
 		newfmt = kmem_alloc(len, KM_SLEEP);
 		sprintf(newfmt, "Filesystem \"%s\": %s", mp->m_fsname, fmt);
 		icmn_err(level, newfmt, ap);
-		kmem_free(newfmt, len);
+		kmem_free(newfmt);
 	} else {
 		icmn_err(level, fmt, ap);
 	}
diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h
index 6490d2a9f8e..11543f10b0c 100644
--- a/fs/xfs/xfs_error.h
+++ b/fs/xfs/xfs_error.h
@@ -125,23 +125,14 @@ extern void xfs_corruption_error(char *tag, int level, struct xfs_mount *mp,
 #define XFS_RANDOM_DIOWRITE_IOERR			(XFS_RANDOM_DEFAULT/10)
 #define	XFS_RANDOM_BMAPIFORMAT				XFS_RANDOM_DEFAULT
 
-#if (defined(DEBUG) || defined(INDUCE_IO_ERROR))
+#ifdef DEBUG
 extern int xfs_error_test(int, int *, char *, int, char *, unsigned long);
-extern void xfs_error_test_init(void);
 
 #define	XFS_NUM_INJECT_ERROR				10
-
-#ifdef __ANSI_CPP__
-#define XFS_TEST_ERROR(expr, mp, tag, rf)		\
-	((expr) || \
-	 xfs_error_test((tag), (mp)->m_fixedfsid, #expr, __LINE__, __FILE__, \
-			 (rf)))
-#else
 #define XFS_TEST_ERROR(expr, mp, tag, rf)		\
 	((expr) || \
 	 xfs_error_test((tag), (mp)->m_fixedfsid, "expr", __LINE__, __FILE__, \
 			(rf)))
-#endif /* __ANSI_CPP__ */
 
 extern int xfs_errortag_add(int error_tag, xfs_mount_t *mp);
 extern int xfs_errortag_clearall(xfs_mount_t *mp, int loud);
@@ -149,7 +140,7 @@ extern int xfs_errortag_clearall(xfs_mount_t *mp, int loud);
 #define XFS_TEST_ERROR(expr, mp, tag, rf)	(expr)
 #define xfs_errortag_add(tag, mp)		(ENOSYS)
 #define xfs_errortag_clearall(mp, loud)		(ENOSYS)
-#endif /* (DEBUG || INDUCE_IO_ERROR) */
+#endif /* DEBUG */
 
 /*
  * XFS panic tags -- allow a call to xfs_cmn_err() be turned into
diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c
index 132bd07b9bb..8aa28f751b2 100644
--- a/fs/xfs/xfs_extfree_item.c
+++ b/fs/xfs/xfs_extfree_item.c
@@ -41,8 +41,7 @@ xfs_efi_item_free(xfs_efi_log_item_t *efip)
 	int nexts = efip->efi_format.efi_nextents;
 
 	if (nexts > XFS_EFI_MAX_FAST_EXTENTS) {
-		kmem_free(efip, sizeof(xfs_efi_log_item_t) +
-				(nexts - 1) * sizeof(xfs_extent_t));
+		kmem_free(efip);
 	} else {
 		kmem_zone_free(xfs_efi_zone, efip);
 	}
@@ -374,8 +373,7 @@ xfs_efd_item_free(xfs_efd_log_item_t *efdp)
 	int nexts = efdp->efd_format.efd_nextents;
 
 	if (nexts > XFS_EFD_MAX_FAST_EXTENTS) {
-		kmem_free(efdp, sizeof(xfs_efd_log_item_t) +
-				(nexts - 1) * sizeof(xfs_extent_t));
+		kmem_free(efdp);
 	} else {
 		kmem_zone_free(xfs_efd_zone, efdp);
 	}
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index 3f3785b1080..f3bb75da384 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -397,10 +397,12 @@ int
 xfs_filestream_init(void)
 {
 	item_zone = kmem_zone_init(sizeof(fstrm_item_t), "fstrm_item");
+	if (!item_zone)
+		return -ENOMEM;
 #ifdef XFS_FILESTREAMS_TRACE
-	xfs_filestreams_trace_buf = ktrace_alloc(XFS_FSTRM_KTRACE_SIZE, KM_SLEEP);
+	xfs_filestreams_trace_buf = ktrace_alloc(XFS_FSTRM_KTRACE_SIZE, KM_NOFS);
 #endif
-	return item_zone ? 0 : -ENOMEM;
+	return 0;
 }
 
 /*
diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h
index 3bed6433d05..01c0cc88d3f 100644
--- a/fs/xfs/xfs_fs.h
+++ b/fs/xfs/xfs_fs.h
@@ -239,6 +239,7 @@ typedef struct xfs_fsop_resblks {
 #define XFS_FSOP_GEOM_FLAGS_LOGV2	0x0100	/* log format version 2	*/
 #define XFS_FSOP_GEOM_FLAGS_SECTOR	0x0200	/* sector sizes >1BB	*/
 #define XFS_FSOP_GEOM_FLAGS_ATTR2	0x0400	/* inline attributes rework */
+#define XFS_FSOP_GEOM_FLAGS_DIRV2CI	0x1000	/* ASCII only CI names */
 #define XFS_FSOP_GEOM_FLAGS_LAZYSB	0x4000	/* lazy superblock counters */
 
 
@@ -371,6 +372,9 @@ typedef struct xfs_fsop_attrlist_handlereq {
 
 typedef struct xfs_attr_multiop {
 	__u32		am_opcode;
+#define ATTR_OP_GET	1	/* return the indicated attr's value */
+#define ATTR_OP_SET	2	/* set/create the indicated attr/value pair */
+#define ATTR_OP_REMOVE	3	/* remove the indicated attr */
 	__s32		am_error;
 	void		__user *am_attrname;
 	void		__user *am_attrvalue;
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index 381ebda4f7b..84583cf73db 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -95,6 +95,8 @@ xfs_fs_geometry(
 				XFS_FSOP_GEOM_FLAGS_DIRV2 : 0) |
 			(xfs_sb_version_hassector(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_SECTOR : 0) |
+			(xfs_sb_version_hasasciici(&mp->m_sb) ?
+				XFS_FSOP_GEOM_FLAGS_DIRV2CI : 0) |
 			(xfs_sb_version_haslazysbcount(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_LAZYSB : 0) |
 			(xfs_sb_version_hasattr2(&mp->m_sb) ?
@@ -625,7 +627,7 @@ xfs_fs_goingdown(
 			xfs_force_shutdown(mp, SHUTDOWN_FORCE_UMOUNT);
 			thaw_bdev(sb->s_bdev, sb);
 		}
-	
+
 		break;
 	}
 	case XFS_FSOP_GOING_FLAGS_LOGFLUSH:
diff --git a/fs/xfs/xfs_ialloc_btree.c b/fs/xfs/xfs_ialloc_btree.c
index e5310c90e50..83502f3edef 100644
--- a/fs/xfs/xfs_ialloc_btree.c
+++ b/fs/xfs/xfs_ialloc_btree.c
@@ -181,7 +181,7 @@ xfs_inobt_delrec(
 		 * then we can get rid of this level.
 		 */
 		if (numrecs == 1 && level > 0) {
-			agbp = cur->bc_private.i.agbp;
+			agbp = cur->bc_private.a.agbp;
 			agi = XFS_BUF_TO_AGI(agbp);
 			/*
 			 * pp is still set to the first pointer in the block.
@@ -194,7 +194,7 @@ xfs_inobt_delrec(
 			 * Free the block.
 			 */
 			if ((error = xfs_free_extent(cur->bc_tp,
-				XFS_AGB_TO_FSB(mp, cur->bc_private.i.agno, bno), 1)))
+				XFS_AGB_TO_FSB(mp, cur->bc_private.a.agno, bno), 1)))
 				return error;
 			xfs_trans_binval(cur->bc_tp, bp);
 			xfs_ialloc_log_agi(cur->bc_tp, agbp,
@@ -379,7 +379,7 @@ xfs_inobt_delrec(
 		rrecs = be16_to_cpu(right->bb_numrecs);
 		rbp = bp;
 		if ((error = xfs_btree_read_bufs(mp, cur->bc_tp,
-				cur->bc_private.i.agno, lbno, 0, &lbp,
+				cur->bc_private.a.agno, lbno, 0, &lbp,
 				XFS_INO_BTREE_REF)))
 			return error;
 		left = XFS_BUF_TO_INOBT_BLOCK(lbp);
@@ -401,7 +401,7 @@ xfs_inobt_delrec(
 		lrecs = be16_to_cpu(left->bb_numrecs);
 		lbp = bp;
 		if ((error = xfs_btree_read_bufs(mp, cur->bc_tp,
-				cur->bc_private.i.agno, rbno, 0, &rbp,
+				cur->bc_private.a.agno, rbno, 0, &rbp,
 				XFS_INO_BTREE_REF)))
 			return error;
 		right = XFS_BUF_TO_INOBT_BLOCK(rbp);
@@ -484,7 +484,7 @@ xfs_inobt_delrec(
 		xfs_buf_t		*rrbp;
 
 		if ((error = xfs_btree_read_bufs(mp, cur->bc_tp,
-				cur->bc_private.i.agno, be32_to_cpu(left->bb_rightsib), 0,
+				cur->bc_private.a.agno, be32_to_cpu(left->bb_rightsib), 0,
 				&rrbp, XFS_INO_BTREE_REF)))
 			return error;
 		rrblock = XFS_BUF_TO_INOBT_BLOCK(rrbp);
@@ -497,7 +497,7 @@ xfs_inobt_delrec(
 	 * Free the deleting block.
 	 */
 	if ((error = xfs_free_extent(cur->bc_tp, XFS_AGB_TO_FSB(mp,
-				     cur->bc_private.i.agno, rbno), 1)))
+				     cur->bc_private.a.agno, rbno), 1)))
 		return error;
 	xfs_trans_binval(cur->bc_tp, rbp);
 	/*
@@ -854,7 +854,7 @@ xfs_inobt_lookup(
 	{
 		xfs_agi_t	*agi;	/* a.g. inode header */
 
-		agi = XFS_BUF_TO_AGI(cur->bc_private.i.agbp);
+		agi = XFS_BUF_TO_AGI(cur->bc_private.a.agbp);
 		agno = be32_to_cpu(agi->agi_seqno);
 		agbno = be32_to_cpu(agi->agi_root);
 	}
@@ -1089,7 +1089,7 @@ xfs_inobt_lshift(
 	 * Set up the left neighbor as "left".
 	 */
 	if ((error = xfs_btree_read_bufs(cur->bc_mp, cur->bc_tp,
-			cur->bc_private.i.agno, be32_to_cpu(right->bb_leftsib),
+			cur->bc_private.a.agno, be32_to_cpu(right->bb_leftsib),
 			0, &lbp, XFS_INO_BTREE_REF)))
 		return error;
 	left = XFS_BUF_TO_INOBT_BLOCK(lbp);
@@ -1207,10 +1207,10 @@ xfs_inobt_newroot(
 	/*
 	 * Get a block & a buffer.
 	 */
-	agi = XFS_BUF_TO_AGI(cur->bc_private.i.agbp);
+	agi = XFS_BUF_TO_AGI(cur->bc_private.a.agbp);
 	args.tp = cur->bc_tp;
 	args.mp = cur->bc_mp;
-	args.fsbno = XFS_AGB_TO_FSB(args.mp, cur->bc_private.i.agno,
+	args.fsbno = XFS_AGB_TO_FSB(args.mp, cur->bc_private.a.agno,
 		be32_to_cpu(agi->agi_root));
 	args.mod = args.minleft = args.alignment = args.total = args.wasdel =
 		args.isfl = args.userdata = args.minalignslop = 0;
@@ -1233,7 +1233,7 @@ xfs_inobt_newroot(
 	 */
 	agi->agi_root = cpu_to_be32(args.agbno);
 	be32_add_cpu(&agi->agi_level, 1);
-	xfs_ialloc_log_agi(args.tp, cur->bc_private.i.agbp,
+	xfs_ialloc_log_agi(args.tp, cur->bc_private.a.agbp,
 		XFS_AGI_ROOT | XFS_AGI_LEVEL);
 	/*
 	 * At the previous root level there are now two blocks: the old
@@ -1376,7 +1376,7 @@ xfs_inobt_rshift(
 	 * Set up the right neighbor as "right".
 	 */
 	if ((error = xfs_btree_read_bufs(cur->bc_mp, cur->bc_tp,
-			cur->bc_private.i.agno, be32_to_cpu(left->bb_rightsib),
+			cur->bc_private.a.agno, be32_to_cpu(left->bb_rightsib),
 			0, &rbp, XFS_INO_BTREE_REF)))
 		return error;
 	right = XFS_BUF_TO_INOBT_BLOCK(rbp);
@@ -1492,7 +1492,7 @@ xfs_inobt_split(
 	 * Allocate the new block.
 	 * If we can't do it, we're toast.  Give up.
 	 */
-	args.fsbno = XFS_AGB_TO_FSB(args.mp, cur->bc_private.i.agno, lbno);
+	args.fsbno = XFS_AGB_TO_FSB(args.mp, cur->bc_private.a.agno, lbno);
 	args.mod = args.minleft = args.alignment = args.total = args.wasdel =
 		args.isfl = args.userdata = args.minalignslop = 0;
 	args.minlen = args.maxlen = args.prod = 1;
@@ -1725,7 +1725,7 @@ xfs_inobt_decrement(
 
 		agbno = be32_to_cpu(*XFS_INOBT_PTR_ADDR(block, cur->bc_ptrs[lev], cur));
 		if ((error = xfs_btree_read_bufs(cur->bc_mp, cur->bc_tp,
-				cur->bc_private.i.agno, agbno, 0, &bp,
+				cur->bc_private.a.agno, agbno, 0, &bp,
 				XFS_INO_BTREE_REF)))
 			return error;
 		lev--;
@@ -1897,7 +1897,7 @@ xfs_inobt_increment(
 
 		agbno = be32_to_cpu(*XFS_INOBT_PTR_ADDR(block, cur->bc_ptrs[lev], cur));
 		if ((error = xfs_btree_read_bufs(cur->bc_mp, cur->bc_tp,
-				cur->bc_private.i.agno, agbno, 0, &bp,
+				cur->bc_private.a.agno, agbno, 0, &bp,
 				XFS_INO_BTREE_REF)))
 			return error;
 		lev--;
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index b07604b94d9..e229e9e001c 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -216,7 +216,14 @@ finish_inode:
 	mrlock_init(&ip->i_iolock, MRLOCK_BARRIER, "xfsio", ip->i_ino);
 	init_waitqueue_head(&ip->i_ipin_wait);
 	atomic_set(&ip->i_pincount, 0);
-	initnsema(&ip->i_flock, 1, "xfsfino");
+
+	/*
+	 * Because we want to use a counting completion, complete
+	 * the flush completion once to allow a single access to
+	 * the flush completion without blocking.
+	 */
+	init_completion(&ip->i_flush);
+	complete(&ip->i_flush);
 
 	if (lock_flags)
 		xfs_ilock(ip, lock_flags);
@@ -288,10 +295,17 @@ finish_inode:
 	*ipp = ip;
 
 	/*
+	 * Set up the Linux with the Linux inode.
+	 */
+	ip->i_vnode = inode;
+	inode->i_private = ip;
+
+	/*
 	 * If we have a real type for an on-disk inode, we can set ops(&unlock)
 	 * now.	 If it's a new inode being created, xfs_ialloc will handle it.
 	 */
-	xfs_initialize_vnode(mp, inode, ip);
+	if (ip->i_d.di_mode != 0)
+		xfs_setup_inode(ip);
 	return 0;
 }
 
@@ -411,10 +425,11 @@ xfs_iput(xfs_inode_t	*ip,
  * Special iput for brand-new inodes that are still locked
  */
 void
-xfs_iput_new(xfs_inode_t	*ip,
-	     uint		lock_flags)
+xfs_iput_new(
+	xfs_inode_t	*ip,
+	uint		lock_flags)
 {
-	struct inode	*inode = ip->i_vnode;
+	struct inode	*inode = VFS_I(ip);
 
 	xfs_itrace_entry(ip);
 
@@ -775,26 +790,3 @@ xfs_isilocked(
 }
 #endif
 
-/*
- * The following three routines simply manage the i_flock
- * semaphore embedded in the inode.  This semaphore synchronizes
- * processes attempting to flush the in-core inode back to disk.
- */
-void
-xfs_iflock(xfs_inode_t *ip)
-{
-	psema(&(ip->i_flock), PINOD|PLTWAIT);
-}
-
-int
-xfs_iflock_nowait(xfs_inode_t *ip)
-{
-	return (cpsema(&(ip->i_flock)));
-}
-
-void
-xfs_ifunlock(xfs_inode_t *ip)
-{
-	ASSERT(issemalocked(&(ip->i_flock)));
-	vsema(&(ip->i_flock));
-}
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index e569bf5d6cf..00e80df9dd9 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -580,8 +580,8 @@ xfs_iformat_extents(
 		xfs_validate_extents(ifp, nex, XFS_EXTFMT_INODE(ip));
 		for (i = 0; i < nex; i++, dp++) {
 			xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i);
-			ep->l0 = be64_to_cpu(get_unaligned(&dp->l0));
-			ep->l1 = be64_to_cpu(get_unaligned(&dp->l1));
+			ep->l0 = get_unaligned_be64(&dp->l0);
+			ep->l1 = get_unaligned_be64(&dp->l1);
 		}
 		XFS_BMAP_TRACE_EXLIST(ip, nex, whichfork);
 		if (whichfork != XFS_DATA_FORK ||
@@ -835,22 +835,22 @@ xfs_iread(
 	 * Do this before xfs_iformat in case it adds entries.
 	 */
 #ifdef	XFS_INODE_TRACE
-	ip->i_trace = ktrace_alloc(INODE_TRACE_SIZE, KM_SLEEP);
+	ip->i_trace = ktrace_alloc(INODE_TRACE_SIZE, KM_NOFS);
 #endif
 #ifdef XFS_BMAP_TRACE
-	ip->i_xtrace = ktrace_alloc(XFS_BMAP_KTRACE_SIZE, KM_SLEEP);
+	ip->i_xtrace = ktrace_alloc(XFS_BMAP_KTRACE_SIZE, KM_NOFS);
 #endif
 #ifdef XFS_BMBT_TRACE
-	ip->i_btrace = ktrace_alloc(XFS_BMBT_KTRACE_SIZE, KM_SLEEP);
+	ip->i_btrace = ktrace_alloc(XFS_BMBT_KTRACE_SIZE, KM_NOFS);
 #endif
 #ifdef XFS_RW_TRACE
-	ip->i_rwtrace = ktrace_alloc(XFS_RW_KTRACE_SIZE, KM_SLEEP);
+	ip->i_rwtrace = ktrace_alloc(XFS_RW_KTRACE_SIZE, KM_NOFS);
 #endif
 #ifdef XFS_ILOCK_TRACE
-	ip->i_lock_trace = ktrace_alloc(XFS_ILOCK_KTRACE_SIZE, KM_SLEEP);
+	ip->i_lock_trace = ktrace_alloc(XFS_ILOCK_KTRACE_SIZE, KM_NOFS);
 #endif
 #ifdef XFS_DIR2_TRACE
-	ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_SLEEP);
+	ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS);
 #endif
 
 	/*
@@ -1046,9 +1046,9 @@ xfs_ialloc(
 {
 	xfs_ino_t	ino;
 	xfs_inode_t	*ip;
-	bhv_vnode_t	*vp;
 	uint		flags;
 	int		error;
+	timespec_t	tv;
 
 	/*
 	 * Call the space management code to pick
@@ -1077,13 +1077,12 @@ xfs_ialloc(
 	}
 	ASSERT(ip != NULL);
 
-	vp = XFS_ITOV(ip);
 	ip->i_d.di_mode = (__uint16_t)mode;
 	ip->i_d.di_onlink = 0;
 	ip->i_d.di_nlink = nlink;
 	ASSERT(ip->i_d.di_nlink == nlink);
-	ip->i_d.di_uid = current_fsuid(cr);
-	ip->i_d.di_gid = current_fsgid(cr);
+	ip->i_d.di_uid = current_fsuid();
+	ip->i_d.di_gid = current_fsgid();
 	ip->i_d.di_projid = prid;
 	memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad));
 
@@ -1130,7 +1129,13 @@ xfs_ialloc(
 	ip->i_size = 0;
 	ip->i_d.di_nextents = 0;
 	ASSERT(ip->i_d.di_nblocks == 0);
-	xfs_ichgtime(ip, XFS_ICHGTIME_CHG|XFS_ICHGTIME_ACC|XFS_ICHGTIME_MOD);
+
+	nanotime(&tv);
+	ip->i_d.di_mtime.t_sec = (__int32_t)tv.tv_sec;
+	ip->i_d.di_mtime.t_nsec = (__int32_t)tv.tv_nsec;
+	ip->i_d.di_atime = ip->i_d.di_mtime;
+	ip->i_d.di_ctime = ip->i_d.di_mtime;
+
 	/*
 	 * di_gen will have been taken care of in xfs_iread.
 	 */
@@ -1220,7 +1225,7 @@ xfs_ialloc(
 	xfs_trans_log_inode(tp, ip, flags);
 
 	/* now that we have an i_mode we can setup inode ops and unlock */
-	xfs_initialize_vnode(tp->t_mountp, vp, ip);
+	xfs_setup_inode(ip);
 
 	*ipp = ip;
 	return 0;
@@ -1399,7 +1404,6 @@ xfs_itruncate_start(
 	xfs_fsize_t	last_byte;
 	xfs_off_t	toss_start;
 	xfs_mount_t	*mp;
-	bhv_vnode_t	*vp;
 	int		error = 0;
 
 	ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
@@ -1408,7 +1412,6 @@ xfs_itruncate_start(
 	       (flags == XFS_ITRUNC_MAYBE));
 
 	mp = ip->i_mount;
-	vp = XFS_ITOV(ip);
 
 	/* wait for the completion of any pending DIOs */
 	if (new_size < ip->i_size)
@@ -1457,7 +1460,7 @@ xfs_itruncate_start(
 
 #ifdef DEBUG
 	if (new_size == 0) {
-		ASSERT(VN_CACHED(vp) == 0);
+		ASSERT(VN_CACHED(VFS_I(ip)) == 0);
 	}
 #endif
 	return error;
@@ -1763,67 +1766,6 @@ xfs_itruncate_finish(
 	return 0;
 }
 
-
-/*
- * xfs_igrow_start
- *
- * Do the first part of growing a file: zero any data in the last
- * block that is beyond the old EOF.  We need to do this before
- * the inode is joined to the transaction to modify the i_size.
- * That way we can drop the inode lock and call into the buffer
- * cache to get the buffer mapping the EOF.
- */
-int
-xfs_igrow_start(
-	xfs_inode_t	*ip,
-	xfs_fsize_t	new_size,
-	cred_t		*credp)
-{
-	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL));
-	ASSERT(new_size > ip->i_size);
-
-	/*
-	 * Zero any pages that may have been created by
-	 * xfs_write_file() beyond the end of the file
-	 * and any blocks between the old and new file sizes.
-	 */
-	return xfs_zero_eof(ip, new_size, ip->i_size);
-}
-
-/*
- * xfs_igrow_finish
- *
- * This routine is called to extend the size of a file.
- * The inode must have both the iolock and the ilock locked
- * for update and it must be a part of the current transaction.
- * The xfs_igrow_start() function must have been called previously.
- * If the change_flag is not zero, the inode change timestamp will
- * be updated.
- */
-void
-xfs_igrow_finish(
-	xfs_trans_t	*tp,
-	xfs_inode_t	*ip,
-	xfs_fsize_t	new_size,
-	int		change_flag)
-{
-	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL));
-	ASSERT(ip->i_transp == tp);
-	ASSERT(new_size > ip->i_size);
-
-	/*
-	 * Update the file size.  Update the inode change timestamp
-	 * if change_flag set.
-	 */
-	ip->i_d.di_size = new_size;
-	ip->i_size = new_size;
-	if (change_flag)
-		xfs_ichgtime(ip, XFS_ICHGTIME_CHG);
-	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-
-}
-
-
 /*
  * This is called when the inode's link count goes to 0.
  * We place the on-disk inode on a list in the AGI.  It
@@ -2258,7 +2200,7 @@ xfs_ifree_cluster(
 		xfs_trans_binval(tp, bp);
 	}
 
-	kmem_free(ip_found, ninodes * sizeof(xfs_inode_t *));
+	kmem_free(ip_found);
 	xfs_put_perag(mp, pag);
 }
 
@@ -2470,7 +2412,7 @@ xfs_iroot_realloc(
 						     (int)new_size);
 		memcpy(np, op, new_max * (uint)sizeof(xfs_dfsbno_t));
 	}
-	kmem_free(ifp->if_broot, ifp->if_broot_bytes);
+	kmem_free(ifp->if_broot);
 	ifp->if_broot = new_broot;
 	ifp->if_broot_bytes = (int)new_size;
 	ASSERT(ifp->if_broot_bytes <=
@@ -2514,7 +2456,7 @@ xfs_idata_realloc(
 
 	if (new_size == 0) {
 		if (ifp->if_u1.if_data != ifp->if_u2.if_inline_data) {
-			kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes);
+			kmem_free(ifp->if_u1.if_data);
 		}
 		ifp->if_u1.if_data = NULL;
 		real_size = 0;
@@ -2529,7 +2471,7 @@ xfs_idata_realloc(
 			ASSERT(ifp->if_real_bytes != 0);
 			memcpy(ifp->if_u2.if_inline_data, ifp->if_u1.if_data,
 			      new_size);
-			kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes);
+			kmem_free(ifp->if_u1.if_data);
 			ifp->if_u1.if_data = ifp->if_u2.if_inline_data;
 		}
 		real_size = 0;
@@ -2636,7 +2578,7 @@ xfs_idestroy_fork(
 
 	ifp = XFS_IFORK_PTR(ip, whichfork);
 	if (ifp->if_broot != NULL) {
-		kmem_free(ifp->if_broot, ifp->if_broot_bytes);
+		kmem_free(ifp->if_broot);
 		ifp->if_broot = NULL;
 	}
 
@@ -2650,7 +2592,7 @@ xfs_idestroy_fork(
 		if ((ifp->if_u1.if_data != ifp->if_u2.if_inline_data) &&
 		    (ifp->if_u1.if_data != NULL)) {
 			ASSERT(ifp->if_real_bytes != 0);
-			kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes);
+			kmem_free(ifp->if_u1.if_data);
 			ifp->if_u1.if_data = NULL;
 			ifp->if_real_bytes = 0;
 		}
@@ -2691,7 +2633,6 @@ xfs_idestroy(
 		xfs_idestroy_fork(ip, XFS_ATTR_FORK);
 	mrfree(&ip->i_lock);
 	mrfree(&ip->i_iolock);
-	freesema(&ip->i_flock);
 
 #ifdef XFS_INODE_TRACE
 	ktrace_free(ip->i_trace);
@@ -3058,7 +2999,7 @@ xfs_iflush_cluster(
 
 out_free:
 	read_unlock(&pag->pag_ici_lock);
-	kmem_free(ilist, ilist_size);
+	kmem_free(ilist);
 	return 0;
 
 
@@ -3102,17 +3043,17 @@ cluster_corrupt_out:
 	 * Unlocks the flush lock
 	 */
 	xfs_iflush_abort(iq);
-	kmem_free(ilist, ilist_size);
+	kmem_free(ilist);
 	return XFS_ERROR(EFSCORRUPTED);
 }
 
 /*
  * xfs_iflush() will write a modified inode's changes out to the
  * inode's on disk home.  The caller must have the inode lock held
- * in at least shared mode and the inode flush semaphore must be
- * held as well.  The inode lock will still be held upon return from
+ * in at least shared mode and the inode flush completion must be
+ * active as well.  The inode lock will still be held upon return from
  * the call and the caller is free to unlock it.
- * The inode flush lock will be unlocked when the inode reaches the disk.
+ * The inode flush will be completed when the inode reaches the disk.
  * The flags indicate how the inode's buffer should be written out.
  */
 int
@@ -3131,7 +3072,7 @@ xfs_iflush(
 	XFS_STATS_INC(xs_iflush_count);
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED));
-	ASSERT(issemalocked(&(ip->i_flock)));
+	ASSERT(!completion_done(&ip->i_flush));
 	ASSERT(ip->i_d.di_format != XFS_DINODE_FMT_BTREE ||
 	       ip->i_d.di_nextents > ip->i_df.if_ext_max);
 
@@ -3143,8 +3084,6 @@ xfs_iflush(
 	 * flush lock and do nothing.
 	 */
 	if (xfs_inode_clean(ip)) {
-		ASSERT((iip != NULL) ?
-			 !(iip->ili_item.li_flags & XFS_LI_IN_AIL) : 1);
 		xfs_ifunlock(ip);
 		return 0;
 	}
@@ -3296,7 +3235,7 @@ xfs_iflush_int(
 #endif
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED));
-	ASSERT(issemalocked(&(ip->i_flock)));
+	ASSERT(!completion_done(&ip->i_flush));
 	ASSERT(ip->i_d.di_format != XFS_DINODE_FMT_BTREE ||
 	       ip->i_d.di_nextents > ip->i_df.if_ext_max);
 
@@ -3528,7 +3467,6 @@ xfs_iflush_all(
 	xfs_mount_t	*mp)
 {
 	xfs_inode_t	*ip;
-	bhv_vnode_t	*vp;
 
  again:
 	XFS_MOUNT_ILOCK(mp);
@@ -3543,14 +3481,13 @@ xfs_iflush_all(
 			continue;
 		}
 
-		vp = XFS_ITOV_NULL(ip);
-		if (!vp) {
+		if (!VFS_I(ip)) {
 			XFS_MOUNT_IUNLOCK(mp);
 			xfs_finish_reclaim(ip, 0, XFS_IFLUSH_ASYNC);
 			goto again;
 		}
 
-		ASSERT(vn_count(vp) == 0);
+		ASSERT(vn_count(VFS_I(ip)) == 0);
 
 		ip = ip->i_mnext;
 	} while (ip != mp->m_inodes);
@@ -3770,7 +3707,7 @@ xfs_iext_add_indirect_multi(
 	 * (all extents past */
 	if (nex2) {
 		byte_diff = nex2 * sizeof(xfs_bmbt_rec_t);
-		nex2_ep = (xfs_bmbt_rec_t *) kmem_alloc(byte_diff, KM_SLEEP);
+		nex2_ep = (xfs_bmbt_rec_t *) kmem_alloc(byte_diff, KM_NOFS);
 		memmove(nex2_ep, &erp->er_extbuf[idx], byte_diff);
 		erp->er_extcount -= nex2;
 		xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, -nex2);
@@ -3836,7 +3773,7 @@ xfs_iext_add_indirect_multi(
 			erp = xfs_iext_irec_new(ifp, erp_idx);
 		}
 		memmove(&erp->er_extbuf[i], nex2_ep, byte_diff);
-		kmem_free(nex2_ep, byte_diff);
+		kmem_free(nex2_ep);
 		erp->er_extcount += nex2;
 		xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, nex2);
 	}
@@ -4070,8 +4007,7 @@ xfs_iext_realloc_direct(
 			ifp->if_u1.if_extents =
 				kmem_realloc(ifp->if_u1.if_extents,
 						rnew_size,
-						ifp->if_real_bytes,
-						KM_SLEEP);
+						ifp->if_real_bytes, KM_NOFS);
 		}
 		if (rnew_size > ifp->if_real_bytes) {
 			memset(&ifp->if_u1.if_extents[ifp->if_bytes /
@@ -4112,7 +4048,7 @@ xfs_iext_direct_to_inline(
 	 */
 	memcpy(ifp->if_u2.if_inline_ext, ifp->if_u1.if_extents,
 		nextents * sizeof(xfs_bmbt_rec_t));
-	kmem_free(ifp->if_u1.if_extents, ifp->if_real_bytes);
+	kmem_free(ifp->if_u1.if_extents);
 	ifp->if_u1.if_extents = ifp->if_u2.if_inline_ext;
 	ifp->if_real_bytes = 0;
 }
@@ -4130,7 +4066,7 @@ xfs_iext_inline_to_direct(
 	xfs_ifork_t	*ifp,		/* inode fork pointer */
 	int		new_size)	/* number of extents in file */
 {
-	ifp->if_u1.if_extents = kmem_alloc(new_size, KM_SLEEP);
+	ifp->if_u1.if_extents = kmem_alloc(new_size, KM_NOFS);
 	memset(ifp->if_u1.if_extents, 0, new_size);
 	if (ifp->if_bytes) {
 		memcpy(ifp->if_u1.if_extents, ifp->if_u2.if_inline_ext,
@@ -4162,7 +4098,7 @@ xfs_iext_realloc_indirect(
 	} else {
 		ifp->if_u1.if_ext_irec = (xfs_ext_irec_t *)
 			kmem_realloc(ifp->if_u1.if_ext_irec,
-				new_size, size, KM_SLEEP);
+				new_size, size, KM_NOFS);
 	}
 }
 
@@ -4186,7 +4122,7 @@ xfs_iext_indirect_to_direct(
 	ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ);
 
 	ep = ifp->if_u1.if_ext_irec->er_extbuf;
-	kmem_free(ifp->if_u1.if_ext_irec, sizeof(xfs_ext_irec_t));
+	kmem_free(ifp->if_u1.if_ext_irec);
 	ifp->if_flags &= ~XFS_IFEXTIREC;
 	ifp->if_u1.if_extents = ep;
 	ifp->if_bytes = size;
@@ -4212,7 +4148,7 @@ xfs_iext_destroy(
 		}
 		ifp->if_flags &= ~XFS_IFEXTIREC;
 	} else if (ifp->if_real_bytes) {
-		kmem_free(ifp->if_u1.if_extents, ifp->if_real_bytes);
+		kmem_free(ifp->if_u1.if_extents);
 	} else if (ifp->if_bytes) {
 		memset(ifp->if_u2.if_inline_ext, 0, XFS_INLINE_EXTS *
 			sizeof(xfs_bmbt_rec_t));
@@ -4404,11 +4340,10 @@ xfs_iext_irec_init(
 	nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
 	ASSERT(nextents <= XFS_LINEAR_EXTS);
 
-	erp = (xfs_ext_irec_t *)
-		kmem_alloc(sizeof(xfs_ext_irec_t), KM_SLEEP);
+	erp = kmem_alloc(sizeof(xfs_ext_irec_t), KM_NOFS);
 
 	if (nextents == 0) {
-		ifp->if_u1.if_extents = kmem_alloc(XFS_IEXT_BUFSZ, KM_SLEEP);
+		ifp->if_u1.if_extents = kmem_alloc(XFS_IEXT_BUFSZ, KM_NOFS);
 	} else if (!ifp->if_real_bytes) {
 		xfs_iext_inline_to_direct(ifp, XFS_IEXT_BUFSZ);
 	} else if (ifp->if_real_bytes < XFS_IEXT_BUFSZ) {
@@ -4456,7 +4391,7 @@ xfs_iext_irec_new(
 
 	/* Initialize new extent record */
 	erp = ifp->if_u1.if_ext_irec;
-	erp[erp_idx].er_extbuf = kmem_alloc(XFS_IEXT_BUFSZ, KM_SLEEP);
+	erp[erp_idx].er_extbuf = kmem_alloc(XFS_IEXT_BUFSZ, KM_NOFS);
 	ifp->if_real_bytes = nlists * XFS_IEXT_BUFSZ;
 	memset(erp[erp_idx].er_extbuf, 0, XFS_IEXT_BUFSZ);
 	erp[erp_idx].er_extcount = 0;
@@ -4483,7 +4418,7 @@ xfs_iext_irec_remove(
 	if (erp->er_extbuf) {
 		xfs_iext_irec_update_extoffs(ifp, erp_idx + 1,
 			-erp->er_extcount);
-		kmem_free(erp->er_extbuf, XFS_IEXT_BUFSZ);
+		kmem_free(erp->er_extbuf);
 	}
 	/* Compact extent records */
 	erp = ifp->if_u1.if_ext_irec;
@@ -4501,8 +4436,7 @@ xfs_iext_irec_remove(
 		xfs_iext_realloc_indirect(ifp,
 			nlists * sizeof(xfs_ext_irec_t));
 	} else {
-		kmem_free(ifp->if_u1.if_ext_irec,
-			sizeof(xfs_ext_irec_t));
+		kmem_free(ifp->if_u1.if_ext_irec);
 	}
 	ifp->if_real_bytes = nlists * XFS_IEXT_BUFSZ;
 }
@@ -4571,7 +4505,7 @@ xfs_iext_irec_compact_pages(
 			 * so er_extoffs don't get modified in
 			 * xfs_iext_irec_remove.
 			 */
-			kmem_free(erp_next->er_extbuf, XFS_IEXT_BUFSZ);
+			kmem_free(erp_next->er_extbuf);
 			erp_next->er_extbuf = NULL;
 			xfs_iext_irec_remove(ifp, erp_idx + 1);
 			nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
@@ -4596,40 +4530,63 @@ xfs_iext_irec_compact_full(
 	int		nlists;			/* number of irec's (ex lists) */
 
 	ASSERT(ifp->if_flags & XFS_IFEXTIREC);
+
 	nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
 	erp = ifp->if_u1.if_ext_irec;
 	ep = &erp->er_extbuf[erp->er_extcount];
 	erp_next = erp + 1;
 	ep_next = erp_next->er_extbuf;
+
 	while (erp_idx < nlists - 1) {
+		/*
+		 * Check how many extent records are available in this irec.
+		 * If there is none skip the whole exercise.
+		 */
 		ext_avail = XFS_LINEAR_EXTS - erp->er_extcount;
-		ext_diff = MIN(ext_avail, erp_next->er_extcount);
-		memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t));
-		erp->er_extcount += ext_diff;
-		erp_next->er_extcount -= ext_diff;
-		/* Remove next page */
-		if (erp_next->er_extcount == 0) {
+		if (ext_avail) {
+
 			/*
-			 * Free page before removing extent record
-			 * so er_extoffs don't get modified in
-			 * xfs_iext_irec_remove.
+			 * Copy over as many as possible extent records into
+			 * the previous page.
 			 */
-			kmem_free(erp_next->er_extbuf,
-				erp_next->er_extcount * sizeof(xfs_bmbt_rec_t));
-			erp_next->er_extbuf = NULL;
-			xfs_iext_irec_remove(ifp, erp_idx + 1);
-			erp = &ifp->if_u1.if_ext_irec[erp_idx];
-			nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
-		/* Update next page */
-		} else {
-			/* Move rest of page up to become next new page */
-			memmove(erp_next->er_extbuf, ep_next,
-				erp_next->er_extcount * sizeof(xfs_bmbt_rec_t));
-			ep_next = erp_next->er_extbuf;
-			memset(&ep_next[erp_next->er_extcount], 0,
-				(XFS_LINEAR_EXTS - erp_next->er_extcount) *
-				sizeof(xfs_bmbt_rec_t));
+			ext_diff = MIN(ext_avail, erp_next->er_extcount);
+			memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t));
+			erp->er_extcount += ext_diff;
+			erp_next->er_extcount -= ext_diff;
+
+			/*
+			 * If the next irec is empty now we can simply
+			 * remove it.
+			 */
+			if (erp_next->er_extcount == 0) {
+				/*
+				 * Free page before removing extent record
+				 * so er_extoffs don't get modified in
+				 * xfs_iext_irec_remove.
+				 */
+				kmem_free(erp_next->er_extbuf);
+				erp_next->er_extbuf = NULL;
+				xfs_iext_irec_remove(ifp, erp_idx + 1);
+				erp = &ifp->if_u1.if_ext_irec[erp_idx];
+				nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
+
+			/*
+			 * If the next irec is not empty move up the content
+			 * that has not been copied to the previous page to
+			 * the beggining of this one.
+			 */
+			} else {
+				memmove(erp_next->er_extbuf, &ep_next[ext_diff],
+					erp_next->er_extcount *
+					sizeof(xfs_bmbt_rec_t));
+				ep_next = erp_next->er_extbuf;
+				memset(&ep_next[erp_next->er_extcount], 0,
+					(XFS_LINEAR_EXTS -
+						erp_next->er_extcount) *
+					sizeof(xfs_bmbt_rec_t));
+			}
 		}
+
 		if (erp->er_extcount == XFS_LINEAR_EXTS) {
 			erp_idx++;
 			if (erp_idx < nlists)
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 0a999fee4f0..1420c49674d 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -87,8 +87,7 @@ typedef struct xfs_ifork {
  * Flags for xfs_ichgtime().
  */
 #define	XFS_ICHGTIME_MOD	0x1	/* data fork modification timestamp */
-#define	XFS_ICHGTIME_ACC	0x2	/* data fork access timestamp */
-#define	XFS_ICHGTIME_CHG	0x4	/* inode field change timestamp */
+#define	XFS_ICHGTIME_CHG	0x2	/* inode field change timestamp */
 
 /*
  * Per-fork incore inode flags.
@@ -204,7 +203,7 @@ typedef struct xfs_inode {
 	struct xfs_inode	*i_mprev;	/* ptr to prev inode */
 	struct xfs_mount	*i_mount;	/* fs mount struct ptr */
 	struct list_head	i_reclaim;	/* reclaim list */
-	bhv_vnode_t		*i_vnode;	/* vnode backpointer */
+	struct inode		*i_vnode;	/* vnode backpointer */
 	struct xfs_dquot	*i_udquot;	/* user dquot */
 	struct xfs_dquot	*i_gdquot;	/* group dquot */
 
@@ -223,7 +222,7 @@ typedef struct xfs_inode {
 	struct xfs_inode_log_item *i_itemp;	/* logging information */
 	mrlock_t		i_lock;		/* inode lock */
 	mrlock_t		i_iolock;	/* inode IO lock */
-	sema_t			i_flock;	/* inode flush lock */
+	struct completion	i_flush;	/* inode flush completion q */
 	atomic_t		i_pincount;	/* inode pin count */
 	wait_queue_head_t	i_ipin_wait;	/* inode pinning wait queue */
 	spinlock_t		i_flags_lock;	/* inode i_flags lock */
@@ -263,6 +262,18 @@ typedef struct xfs_inode {
 #define XFS_ISIZE(ip)	(((ip)->i_d.di_mode & S_IFMT) == S_IFREG) ? \
 				(ip)->i_size : (ip)->i_d.di_size;
 
+/* Convert from vfs inode to xfs inode */
+static inline struct xfs_inode *XFS_I(struct inode *inode)
+{
+	return (struct xfs_inode *)inode->i_private;
+}
+
+/* convert from xfs inode to vfs inode */
+static inline struct inode *VFS_I(struct xfs_inode *ip)
+{
+	return (struct inode *)ip->i_vnode;
+}
+
 /*
  * i_flags helper functions
  */
@@ -439,9 +450,6 @@ xfs_iflags_test_and_clear(xfs_inode_t *ip, unsigned short flags)
 #define	XFS_ITRUNC_DEFINITE	0x1
 #define	XFS_ITRUNC_MAYBE	0x2
 
-#define	XFS_ITOV(ip)		((ip)->i_vnode)
-#define	XFS_ITOV_NULL(ip)	((ip)->i_vnode)
-
 /*
  * For multiple groups support: if S_ISGID bit is set in the parent
  * directory, group of new file is set to that of the parent, and
@@ -473,11 +481,8 @@ int		xfs_ilock_nowait(xfs_inode_t *, uint);
 void		xfs_iunlock(xfs_inode_t *, uint);
 void		xfs_ilock_demote(xfs_inode_t *, uint);
 int		xfs_isilocked(xfs_inode_t *, uint);
-void		xfs_iflock(xfs_inode_t *);
-int		xfs_iflock_nowait(xfs_inode_t *);
 uint		xfs_ilock_map_shared(xfs_inode_t *);
 void		xfs_iunlock_map_shared(xfs_inode_t *, uint);
-void		xfs_ifunlock(xfs_inode_t *);
 void		xfs_ireclaim(xfs_inode_t *);
 int		xfs_finish_reclaim(xfs_inode_t *, int, int);
 int		xfs_finish_reclaim_all(struct xfs_mount *, int);
@@ -507,9 +512,6 @@ int		xfs_itruncate_start(xfs_inode_t *, uint, xfs_fsize_t);
 int		xfs_itruncate_finish(struct xfs_trans **, xfs_inode_t *,
 				     xfs_fsize_t, int, int);
 int		xfs_iunlink(struct xfs_trans *, xfs_inode_t *);
-int		xfs_igrow_start(xfs_inode_t *, xfs_fsize_t, struct cred *);
-void		xfs_igrow_finish(struct xfs_trans *, xfs_inode_t *,
-				 xfs_fsize_t, int);
 
 void		xfs_idestroy_fork(xfs_inode_t *, int);
 void		xfs_idestroy(xfs_inode_t *);
@@ -525,6 +527,7 @@ void		xfs_iflush_all(struct xfs_mount *);
 void		xfs_ichgtime(xfs_inode_t *, int);
 xfs_fsize_t	xfs_file_last_byte(xfs_inode_t *);
 void		xfs_lock_inodes(xfs_inode_t **, int, uint);
+void		xfs_lock_two_inodes(xfs_inode_t *, xfs_inode_t *, uint);
 
 void		xfs_synchronize_atime(xfs_inode_t *);
 void		xfs_mark_inode_dirty_sync(xfs_inode_t *);
@@ -573,6 +576,26 @@ extern struct kmem_zone	*xfs_ifork_zone;
 extern struct kmem_zone	*xfs_inode_zone;
 extern struct kmem_zone	*xfs_ili_zone;
 
+/*
+ * Manage the i_flush queue embedded in the inode.  This completion
+ * queue synchronizes processes attempting to flush the in-core
+ * inode back to disk.
+ */
+static inline void xfs_iflock(xfs_inode_t *ip)
+{
+	wait_for_completion(&ip->i_flush);
+}
+
+static inline int xfs_iflock_nowait(xfs_inode_t *ip)
+{
+	return try_wait_for_completion(&ip->i_flush);
+}
+
+static inline void xfs_ifunlock(xfs_inode_t *ip)
+{
+	complete(&ip->i_flush);
+}
+
 #endif	/* __KERNEL__ */
 
 #endif	/* __XFS_INODE_H__ */
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 167b33f1577..97c7452e262 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -686,7 +686,7 @@ xfs_inode_item_unlock(
 		ASSERT(ip->i_d.di_nextents > 0);
 		ASSERT(iip->ili_format.ilf_fields & XFS_ILOG_DEXT);
 		ASSERT(ip->i_df.if_bytes > 0);
-		kmem_free(iip->ili_extents_buf, ip->i_df.if_bytes);
+		kmem_free(iip->ili_extents_buf);
 		iip->ili_extents_buf = NULL;
 	}
 	if (iip->ili_aextents_buf != NULL) {
@@ -694,7 +694,7 @@ xfs_inode_item_unlock(
 		ASSERT(ip->i_d.di_anextents > 0);
 		ASSERT(iip->ili_format.ilf_fields & XFS_ILOG_AEXT);
 		ASSERT(ip->i_afp->if_bytes > 0);
-		kmem_free(iip->ili_aextents_buf, ip->i_afp->if_bytes);
+		kmem_free(iip->ili_aextents_buf);
 		iip->ili_aextents_buf = NULL;
 	}
 
@@ -779,11 +779,10 @@ xfs_inode_item_pushbuf(
 	ASSERT(iip->ili_push_owner == current_pid());
 
 	/*
-	 * If flushlock isn't locked anymore, chances are that the
-	 * inode flush completed and the inode was taken off the AIL.
-	 * So, just get out.
+	 * If a flush is not in progress anymore, chances are that the
+	 * inode was taken off the AIL. So, just get out.
 	 */
-	if (!issemalocked(&(ip->i_flock)) ||
+	if (completion_done(&ip->i_flush) ||
 	    ((iip->ili_item.li_flags & XFS_LI_IN_AIL) == 0)) {
 		iip->ili_pushbuf_flag = 0;
 		xfs_iunlock(ip, XFS_ILOCK_SHARED);
@@ -805,7 +804,7 @@ xfs_inode_item_pushbuf(
 			 * If not, we can flush it async.
 			 */
 			dopush = ((iip->ili_item.li_flags & XFS_LI_IN_AIL) &&
-				  issemalocked(&(ip->i_flock)));
+				  !completion_done(&ip->i_flush));
 			iip->ili_pushbuf_flag = 0;
 			xfs_iunlock(ip, XFS_ILOCK_SHARED);
 			xfs_buftrace("INODE ITEM PUSH", bp);
@@ -858,7 +857,7 @@ xfs_inode_item_push(
 	ip = iip->ili_inode;
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED));
-	ASSERT(issemalocked(&(ip->i_flock)));
+	ASSERT(!completion_done(&ip->i_flush));
 	/*
 	 * Since we were able to lock the inode's flush lock and
 	 * we found it on the AIL, the inode must be dirty.  This
@@ -957,8 +956,7 @@ xfs_inode_item_destroy(
 {
 #ifdef XFS_TRANS_DEBUG
 	if (ip->i_itemp->ili_root_size != 0) {
-		kmem_free(ip->i_itemp->ili_orig_root,
-			  ip->i_itemp->ili_root_size);
+		kmem_free(ip->i_itemp->ili_orig_root);
 	}
 #endif
 	kmem_zone_free(xfs_ili_zone, ip->i_itemp);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 7edcde691d1..67f22b2b44b 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -889,6 +889,16 @@ xfs_iomap_write_unwritten(
 	count_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + count);
 	count_fsb = (xfs_filblks_t)(count_fsb - offset_fsb);
 
+	/*
+	 * Reserve enough blocks in this transaction for two complete extent
+	 * btree splits.  We may be converting the middle part of an unwritten
+	 * extent and in this case we will insert two new extents in the btree
+	 * each of which could cause a full split.
+	 *
+	 * This reservation amount will be used in the first call to
+	 * xfs_bmbt_split() to select an AG with enough space to satisfy the
+	 * rest of the operation.
+	 */
 	resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0) << 1;
 
 	do {
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index 419de15aeb4..cf6754a3c5b 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -59,7 +59,6 @@ xfs_bulkstat_one_iget(
 {
 	xfs_icdinode_t	*dic;	/* dinode core info pointer */
 	xfs_inode_t	*ip;		/* incore inode pointer */
-	bhv_vnode_t	*vp;
 	int		error;
 
 	error = xfs_iget(mp, NULL, ino,
@@ -72,7 +71,6 @@ xfs_bulkstat_one_iget(
 	ASSERT(ip != NULL);
 	ASSERT(ip->i_blkno != (xfs_daddr_t)0);
 
-	vp = XFS_ITOV(ip);
 	dic = &ip->i_d;
 
 	/* xfs_iget returns the following without needing
@@ -85,7 +83,7 @@ xfs_bulkstat_one_iget(
 	buf->bs_uid = dic->di_uid;
 	buf->bs_gid = dic->di_gid;
 	buf->bs_size = dic->di_size;
-	vn_atime_to_bstime(vp, &buf->bs_atime);
+	vn_atime_to_bstime(VFS_I(ip), &buf->bs_atime);
 	buf->bs_mtime.tv_sec = dic->di_mtime.t_sec;
 	buf->bs_mtime.tv_nsec = dic->di_mtime.t_nsec;
 	buf->bs_ctime.tv_sec = dic->di_ctime.t_sec;
@@ -257,7 +255,7 @@ xfs_bulkstat_one(
 		*ubused = error;
 
  out_free:
-	kmem_free(buf, sizeof(*buf));
+	kmem_free(buf);
 	return error;
 }
 
@@ -708,7 +706,7 @@ xfs_bulkstat(
 	/*
 	 * Done, we're either out of filesystem or space to put the data.
 	 */
-	kmem_free(irbuf, irbsize);
+	kmem_free(irbuf);
 	*ubcountp = ubelem;
 	/*
 	 * Found some inodes, return them now and return the error next time.
@@ -914,7 +912,7 @@ xfs_inumbers(
 		}
 		*lastino = XFS_AGINO_TO_INO(mp, agno, agino);
 	}
-	kmem_free(buffer, bcount * sizeof(*buffer));
+	kmem_free(buffer);
 	if (cur)
 		xfs_btree_del_cursor(cur, (error ? XFS_BTREE_ERROR :
 					   XFS_BTREE_NOERROR));
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index ad3d26ddfe3..503ea89e8b9 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -124,16 +124,27 @@ STATIC void	xlog_verify_tail_lsn(xlog_t *log, xlog_in_core_t *iclog,
 STATIC int	xlog_iclogs_empty(xlog_t *log);
 
 #if defined(XFS_LOG_TRACE)
+
+#define XLOG_TRACE_LOGGRANT_SIZE	2048
+#define XLOG_TRACE_ICLOG_SIZE		256
+
+void
+xlog_trace_loggrant_alloc(xlog_t *log)
+{
+	log->l_grant_trace = ktrace_alloc(XLOG_TRACE_LOGGRANT_SIZE, KM_NOFS);
+}
+
+void
+xlog_trace_loggrant_dealloc(xlog_t *log)
+{
+	ktrace_free(log->l_grant_trace);
+}
+
 void
 xlog_trace_loggrant(xlog_t *log, xlog_ticket_t *tic, xfs_caddr_t string)
 {
 	unsigned long cnts;
 
-	if (!log->l_grant_trace) {
-		log->l_grant_trace = ktrace_alloc(2048, KM_NOSLEEP);
-		if (!log->l_grant_trace)
-			return;
-	}
 	/* ticket counts are 1 byte each */
 	cnts = ((unsigned long)tic->t_ocnt) | ((unsigned long)tic->t_cnt) << 8;
 
@@ -157,10 +168,20 @@ xlog_trace_loggrant(xlog_t *log, xlog_ticket_t *tic, xfs_caddr_t string)
 }
 
 void
+xlog_trace_iclog_alloc(xlog_in_core_t *iclog)
+{
+	iclog->ic_trace = ktrace_alloc(XLOG_TRACE_ICLOG_SIZE, KM_NOFS);
+}
+
+void
+xlog_trace_iclog_dealloc(xlog_in_core_t *iclog)
+{
+	ktrace_free(iclog->ic_trace);
+}
+
+void
 xlog_trace_iclog(xlog_in_core_t *iclog, uint state)
 {
-	if (!iclog->ic_trace)
-		iclog->ic_trace = ktrace_alloc(256, KM_SLEEP);
 	ktrace_enter(iclog->ic_trace,
 		     (void *)((unsigned long)state),
 		     (void *)((unsigned long)current_pid()),
@@ -170,8 +191,15 @@ xlog_trace_iclog(xlog_in_core_t *iclog, uint state)
 		     (void *)NULL, (void *)NULL);
 }
 #else
+
+#define	xlog_trace_loggrant_alloc(log)
+#define	xlog_trace_loggrant_dealloc(log)
 #define	xlog_trace_loggrant(log,tic,string)
+
+#define	xlog_trace_iclog_alloc(iclog)
+#define	xlog_trace_iclog_dealloc(iclog)
 #define	xlog_trace_iclog(iclog,state)
+
 #endif /* XFS_LOG_TRACE */
 
 
@@ -226,20 +254,24 @@ xlog_grant_sub_space(struct log *log, int bytes)
 static void
 xlog_grant_add_space_write(struct log *log, int bytes)
 {
-	log->l_grant_write_bytes += bytes;
-	if (log->l_grant_write_bytes > log->l_logsize) {
-		log->l_grant_write_bytes -= log->l_logsize;
+	int tmp = log->l_logsize - log->l_grant_write_bytes;
+	if (tmp > bytes)
+		log->l_grant_write_bytes += bytes;
+	else {
 		log->l_grant_write_cycle++;
+		log->l_grant_write_bytes = bytes - tmp;
 	}
 }
 
 static void
 xlog_grant_add_space_reserve(struct log *log, int bytes)
 {
-	log->l_grant_reserve_bytes += bytes;
-	if (log->l_grant_reserve_bytes > log->l_logsize) {
-		log->l_grant_reserve_bytes -= log->l_logsize;
+	int tmp = log->l_logsize - log->l_grant_reserve_bytes;
+	if (tmp > bytes)
+		log->l_grant_reserve_bytes += bytes;
+	else {
 		log->l_grant_reserve_cycle++;
+		log->l_grant_reserve_bytes = bytes - tmp;
 	}
 }
 
@@ -332,15 +364,12 @@ xfs_log_done(xfs_mount_t	*mp,
 	} else {
 		xlog_trace_loggrant(log, ticket, "xfs_log_done: (permanent)");
 		xlog_regrant_reserve_log_space(log, ticket);
-	}
-
-	/* If this ticket was a permanent reservation and we aren't
-	 * trying to release it, reset the inited flags; so next time
-	 * we write, a start record will be written out.
-	 */
-	if ((ticket->t_flags & XLOG_TIC_PERM_RESERV) &&
-	    (flags & XFS_LOG_REL_PERM_RESERV) == 0)
+		/* If this ticket was a permanent reservation and we aren't
+		 * trying to release it, reset the inited flags; so next time
+		 * we write, a start record will be written out.
+		 */
 		ticket->t_flags |= XLOG_TIC_INITED;
+	}
 
 	return lsn;
 }	/* xfs_log_done */
@@ -353,11 +382,11 @@ xfs_log_done(xfs_mount_t	*mp,
  * Asynchronous forces are implemented by setting the WANT_SYNC
  * bit in the appropriate in-core log and then returning.
  *
- * Synchronous forces are implemented with a semaphore.  All callers
- * to force a given lsn to disk will wait on a semaphore attached to the
+ * Synchronous forces are implemented with a signal variable. All callers
+ * to force a given lsn to disk will wait on a the sv attached to the
  * specific in-core log.  When given in-core log finally completes its
  * write to disk, that thread will wake up all threads waiting on the
- * semaphore.
+ * sv.
  */
 int
 _xfs_log_force(
@@ -584,12 +613,12 @@ error:
  * mp		- ubiquitous xfs mount point structure
  */
 int
-xfs_log_mount_finish(xfs_mount_t *mp, int mfsi_flags)
+xfs_log_mount_finish(xfs_mount_t *mp)
 {
 	int	error;
 
 	if (!(mp->m_flags & XFS_MOUNT_NORECOVERY))
-		error = xlog_recover_finish(mp->m_log, mfsi_flags);
+		error = xlog_recover_finish(mp->m_log);
 	else {
 		error = 0;
 		ASSERT(mp->m_flags & XFS_MOUNT_RDONLY);
@@ -703,7 +732,7 @@ xfs_log_unmount_write(xfs_mount_t *mp)
 		if (!(iclog->ic_state == XLOG_STATE_ACTIVE ||
 		      iclog->ic_state == XLOG_STATE_DIRTY)) {
 			if (!XLOG_FORCED_SHUTDOWN(log)) {
-				sv_wait(&iclog->ic_forcesema, PMEM,
+				sv_wait(&iclog->ic_force_wait, PMEM,
 					&log->l_icloglock, s);
 			} else {
 				spin_unlock(&log->l_icloglock);
@@ -744,7 +773,7 @@ xfs_log_unmount_write(xfs_mount_t *mp)
 			|| iclog->ic_state == XLOG_STATE_DIRTY
 			|| iclog->ic_state == XLOG_STATE_IOERROR) ) {
 
-				sv_wait(&iclog->ic_forcesema, PMEM,
+				sv_wait(&iclog->ic_force_wait, PMEM,
 					&log->l_icloglock, s);
 		} else {
 			spin_unlock(&log->l_icloglock);
@@ -834,7 +863,7 @@ xfs_log_move_tail(xfs_mount_t	*mp,
 				break;
 			tail_lsn = 0;
 			free_bytes -= tic->t_unit_res;
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_write_headq);
 	}
@@ -855,7 +884,7 @@ xfs_log_move_tail(xfs_mount_t	*mp,
 				break;
 			tail_lsn = 0;
 			free_bytes -= need_bytes;
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_reserve_headq);
 	}
@@ -1008,7 +1037,7 @@ xlog_iodone(xfs_buf_t *bp)
 	 * layer, it means the underlyin device no longer supports
 	 * barrier I/O. Warn loudly and turn off barriers.
 	 */
-	if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ORDERED(bp)) {
+	if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ISORDERED(bp)) {
 		l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER;
 		xfs_fs_cmn_err(CE_WARN, l->l_mp,
 				"xlog_iodone: Barriers are no longer supported"
@@ -1228,8 +1257,9 @@ xlog_alloc_log(xfs_mount_t	*mp,
 
 	spin_lock_init(&log->l_icloglock);
 	spin_lock_init(&log->l_grant_lock);
-	initnsema(&log->l_flushsema, 0, "ic-flush");
+	sv_init(&log->l_flush_wait, 0, "flush_wait");
 
+	xlog_trace_loggrant_alloc(log);
 	/* log record size must be multiple of BBSIZE; see xlog_rec_header_t */
 	ASSERT((XFS_BUF_SIZE(bp) & BBMASK) == 0);
 
@@ -1281,8 +1311,10 @@ xlog_alloc_log(xfs_mount_t	*mp,
 
 		ASSERT(XFS_BUF_ISBUSY(iclog->ic_bp));
 		ASSERT(XFS_BUF_VALUSEMA(iclog->ic_bp) <= 0);
-		sv_init(&iclog->ic_forcesema, SV_DEFAULT, "iclog-force");
-		sv_init(&iclog->ic_writesema, SV_DEFAULT, "iclog-write");
+		sv_init(&iclog->ic_force_wait, SV_DEFAULT, "iclog-force");
+		sv_init(&iclog->ic_write_wait, SV_DEFAULT, "iclog-write");
+
+		xlog_trace_iclog_alloc(iclog);
 
 		iclogp = &iclog->ic_next;
 	}
@@ -1561,33 +1593,21 @@ xlog_dealloc_log(xlog_t *log)
 
 	iclog = log->l_iclog;
 	for (i=0; i<log->l_iclog_bufs; i++) {
-		sv_destroy(&iclog->ic_forcesema);
-		sv_destroy(&iclog->ic_writesema);
+		sv_destroy(&iclog->ic_force_wait);
+		sv_destroy(&iclog->ic_write_wait);
 		xfs_buf_free(iclog->ic_bp);
-#ifdef XFS_LOG_TRACE
-		if (iclog->ic_trace != NULL) {
-			ktrace_free(iclog->ic_trace);
-		}
-#endif
+		xlog_trace_iclog_dealloc(iclog);
 		next_iclog = iclog->ic_next;
-		kmem_free(iclog, sizeof(xlog_in_core_t));
+		kmem_free(iclog);
 		iclog = next_iclog;
 	}
-	freesema(&log->l_flushsema);
 	spinlock_destroy(&log->l_icloglock);
 	spinlock_destroy(&log->l_grant_lock);
 
 	xfs_buf_free(log->l_xbuf);
-#ifdef XFS_LOG_TRACE
-	if (log->l_trace != NULL) {
-		ktrace_free(log->l_trace);
-	}
-	if (log->l_grant_trace != NULL) {
-		ktrace_free(log->l_grant_trace);
-	}
-#endif
+	xlog_trace_loggrant_dealloc(log);
 	log->l_mp->m_log = NULL;
-	kmem_free(log, sizeof(xlog_t));
+	kmem_free(log);
 }	/* xlog_dealloc_log */
 
 /*
@@ -1973,7 +1993,7 @@ xlog_write(xfs_mount_t *	mp,
 /* Clean iclogs starting from the head.  This ordering must be
  * maintained, so an iclog doesn't become ACTIVE beyond one that
  * is SYNCING.  This is also required to maintain the notion that we use
- * a counting semaphore to hold off would be writers to the log when every
+ * a ordered wait queue to hold off would be writers to the log when every
  * iclog is trying to sync to disk.
  *
  * State Change: DIRTY -> ACTIVE
@@ -2097,6 +2117,7 @@ xlog_state_do_callback(
 	int		   funcdidcallbacks; /* flag: function did callbacks */
 	int		   repeats;	/* for issuing console warnings if
 					 * looping too many times */
+	int		   wake = 0;
 
 	spin_lock(&log->l_icloglock);
 	first_iclog = iclog = log->l_iclog;
@@ -2236,7 +2257,7 @@ xlog_state_do_callback(
 			xlog_state_clean_log(log);
 
 			/* wake up threads waiting in xfs_log_force() */
-			sv_broadcast(&iclog->ic_forcesema);
+			sv_broadcast(&iclog->ic_force_wait);
 
 			iclog = iclog->ic_next;
 		} while (first_iclog != iclog);
@@ -2278,15 +2299,13 @@ xlog_state_do_callback(
 	}
 #endif
 
-	flushcnt = 0;
-	if (log->l_iclog->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_IOERROR)) {
-		flushcnt = log->l_flushcnt;
-		log->l_flushcnt = 0;
-	}
+	if (log->l_iclog->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_IOERROR))
+		wake = 1;
 	spin_unlock(&log->l_icloglock);
-	while (flushcnt--)
-		vsema(&log->l_flushsema);
-}	/* xlog_state_do_callback */
+
+	if (wake)
+		sv_broadcast(&log->l_flush_wait);
+}
 
 
 /*
@@ -2300,8 +2319,7 @@ xlog_state_do_callback(
  * the second completion goes through.
  *
  * Callbacks could take time, so they are done outside the scope of the
- * global state machine log lock.  Assume that the calls to cvsema won't
- * take a long time.  At least we know it won't sleep.
+ * global state machine log lock.
  */
 STATIC void
 xlog_state_done_syncing(
@@ -2337,7 +2355,7 @@ xlog_state_done_syncing(
 	 * iclog buffer, we wake them all, one will get to do the
 	 * I/O, the others get to wait for the result.
 	 */
-	sv_broadcast(&iclog->ic_writesema);
+	sv_broadcast(&iclog->ic_write_wait);
 	spin_unlock(&log->l_icloglock);
 	xlog_state_do_callback(log, aborted, iclog);	/* also cleans log */
 }	/* xlog_state_done_syncing */
@@ -2345,11 +2363,9 @@ xlog_state_done_syncing(
 
 /*
  * If the head of the in-core log ring is not (ACTIVE or DIRTY), then we must
- * sleep.  The flush semaphore is set to the number of in-core buffers and
- * decremented around disk syncing.  Therefore, if all buffers are syncing,
- * this semaphore will cause new writes to sleep until a sync completes.
- * Otherwise, this code just does p() followed by v().  This approximates
- * a sleep/wakeup except we can't race.
+ * sleep.  We wait on the flush queue on the head iclog as that should be
+ * the first iclog to complete flushing. Hence if all iclogs are syncing,
+ * we will wait here and all new writes will sleep until a sync completes.
  *
  * The in-core logs are used in a circular fashion. They are not used
  * out-of-order even when an iclog past the head is free.
@@ -2384,16 +2400,15 @@ restart:
 	}
 
 	iclog = log->l_iclog;
-	if (! (iclog->ic_state == XLOG_STATE_ACTIVE)) {
-		log->l_flushcnt++;
-		spin_unlock(&log->l_icloglock);
+	if (iclog->ic_state != XLOG_STATE_ACTIVE) {
 		xlog_trace_iclog(iclog, XLOG_TRACE_SLEEP_FLUSH);
 		XFS_STATS_INC(xs_log_noiclogs);
-		/* Ensure that log writes happen */
-		psema(&log->l_flushsema, PINOD);
+
+		/* Wait for log writes to have flushed */
+		sv_wait(&log->l_flush_wait, 0, &log->l_icloglock, 0);
 		goto restart;
 	}
-	ASSERT(iclog->ic_state == XLOG_STATE_ACTIVE);
+
 	head = &iclog->ic_header;
 
 	atomic_inc(&iclog->ic_refcnt);	/* prevents sync */
@@ -2507,7 +2522,7 @@ xlog_grant_log_space(xlog_t	   *log,
 			goto error_return;
 
 		XFS_STATS_INC(xs_sleep_logspace);
-		sv_wait(&tic->t_sema, PINOD|PLTWAIT, &log->l_grant_lock, s);
+		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 		/*
 		 * If we got an error, and the filesystem is shutting down,
 		 * we'll catch it down below. So just continue...
@@ -2533,7 +2548,7 @@ redo:
 		xlog_trace_loggrant(log, tic,
 				    "xlog_grant_log_space: sleep 2");
 		XFS_STATS_INC(xs_sleep_logspace);
-		sv_wait(&tic->t_sema, PINOD|PLTWAIT, &log->l_grant_lock, s);
+		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 
 		if (XLOG_FORCED_SHUTDOWN(log)) {
 			spin_lock(&log->l_grant_lock);
@@ -2632,7 +2647,7 @@ xlog_regrant_write_log_space(xlog_t	   *log,
 			if (free_bytes < ntic->t_unit_res)
 				break;
 			free_bytes -= ntic->t_unit_res;
-			sv_signal(&ntic->t_sema);
+			sv_signal(&ntic->t_wait);
 			ntic = ntic->t_next;
 		} while (ntic != log->l_write_headq);
 
@@ -2643,7 +2658,7 @@ xlog_regrant_write_log_space(xlog_t	   *log,
 			xlog_trace_loggrant(log, tic,
 				    "xlog_regrant_write_log_space: sleep 1");
 			XFS_STATS_INC(xs_sleep_logspace);
-			sv_wait(&tic->t_sema, PINOD|PLTWAIT,
+			sv_wait(&tic->t_wait, PINOD|PLTWAIT,
 				&log->l_grant_lock, s);
 
 			/* If we're shutting down, this tic is already
@@ -2672,7 +2687,7 @@ redo:
 		if ((tic->t_flags & XLOG_TIC_IN_Q) == 0)
 			xlog_ins_ticketq(&log->l_write_headq, tic);
 		XFS_STATS_INC(xs_sleep_logspace);
-		sv_wait(&tic->t_sema, PINOD|PLTWAIT, &log->l_grant_lock, s);
+		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 
 		/* If we're shutting down, this tic is already off the queue */
 		if (XLOG_FORCED_SHUTDOWN(log)) {
@@ -2915,7 +2930,7 @@ xlog_state_switch_iclogs(xlog_t		*log,
  *	2. the current iclog is drity, and the previous iclog is in the
  *		active or dirty state.
  *
- * We may sleep (call psema) if:
+ * We may sleep if:
  *
  *	1. the current iclog is not in the active nor dirty state.
  *	2. the current iclog dirty, and the previous iclog is not in the
@@ -3012,7 +3027,7 @@ maybe_sleep:
 			return XFS_ERROR(EIO);
 		}
 		XFS_STATS_INC(xs_log_force_sleep);
-		sv_wait(&iclog->ic_forcesema, PINOD, &log->l_icloglock, s);
+		sv_wait(&iclog->ic_force_wait, PINOD, &log->l_icloglock, s);
 		/*
 		 * No need to grab the log lock here since we're
 		 * only deciding whether or not to return EIO
@@ -3095,7 +3110,7 @@ try_again:
 						 XLOG_STATE_SYNCING))) {
 			ASSERT(!(iclog->ic_state & XLOG_STATE_IOERROR));
 			XFS_STATS_INC(xs_log_force_sleep);
-			sv_wait(&iclog->ic_prev->ic_writesema, PSWP,
+			sv_wait(&iclog->ic_prev->ic_write_wait, PSWP,
 				&log->l_icloglock, s);
 			*log_flushed = 1;
 			already_slept = 1;
@@ -3115,7 +3130,7 @@ try_again:
 	    !(iclog->ic_state & (XLOG_STATE_ACTIVE | XLOG_STATE_DIRTY))) {
 
 		/*
-		 * Don't wait on the forcesema if we know that we've
+		 * Don't wait on completion if we know that we've
 		 * gotten a log write error.
 		 */
 		if (iclog->ic_state & XLOG_STATE_IOERROR) {
@@ -3123,7 +3138,7 @@ try_again:
 			return XFS_ERROR(EIO);
 		}
 		XFS_STATS_INC(xs_log_force_sleep);
-		sv_wait(&iclog->ic_forcesema, PSWP, &log->l_icloglock, s);
+		sv_wait(&iclog->ic_force_wait, PSWP, &log->l_icloglock, s);
 		/*
 		 * No need to grab the log lock here since we're
 		 * only deciding whether or not to return EIO
@@ -3179,7 +3194,7 @@ STATIC void
 xlog_ticket_put(xlog_t		*log,
 		xlog_ticket_t	*ticket)
 {
-	sv_destroy(&ticket->t_sema);
+	sv_destroy(&ticket->t_wait);
 	kmem_zone_free(xfs_log_ticket_zone, ticket);
 }	/* xlog_ticket_put */
 
@@ -3269,7 +3284,7 @@ xlog_ticket_get(xlog_t		*log,
 	tic->t_trans_type	= 0;
 	if (xflags & XFS_LOG_PERM_RESERV)
 		tic->t_flags |= XLOG_TIC_PERM_RESERV;
-	sv_init(&(tic->t_sema), SV_DEFAULT, "logtick");
+	sv_init(&(tic->t_wait), SV_DEFAULT, "logtick");
 
 	xlog_tic_reset_res(tic);
 
@@ -3556,14 +3571,14 @@ xfs_log_force_umount(
 	 */
 	if ((tic = log->l_reserve_headq)) {
 		do {
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_reserve_headq);
 	}
 
 	if ((tic = log->l_write_headq)) {
 		do {
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_write_headq);
 	}
diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h
index d1d678ecb63..d47b91f1082 100644
--- a/fs/xfs/xfs_log.h
+++ b/fs/xfs/xfs_log.h
@@ -149,7 +149,7 @@ int	  xfs_log_mount(struct xfs_mount	*mp,
 			struct xfs_buftarg	*log_target,
 			xfs_daddr_t		start_block,
 			int		 	num_bblocks);
-int	  xfs_log_mount_finish(struct xfs_mount *mp, int);
+int	  xfs_log_mount_finish(struct xfs_mount *mp);
 void	  xfs_log_move_tail(struct xfs_mount	*mp,
 			    xfs_lsn_t		tail_lsn);
 int	  xfs_log_notify(struct xfs_mount	*mp,
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index 8952a392b5f..e7d8f84443f 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -241,7 +241,7 @@ typedef struct xlog_res {
 } xlog_res_t;
 
 typedef struct xlog_ticket {
-	sv_t		   t_sema;	 /* sleep on this semaphore      : 20 */
+	sv_t		   t_wait;	 /* ticket wait queue            : 20 */
 	struct xlog_ticket *t_next;	 /*			         :4|8 */
 	struct xlog_ticket *t_prev;	 /*				 :4|8 */
 	xlog_tid_t	   t_tid;	 /* transaction identifier	 : 4  */
@@ -314,7 +314,7 @@ typedef struct xlog_rec_ext_header {
  *	xlog_rec_header_t into the reserved space.
  * - ic_data follows, so a write to disk can start at the beginning of
  *	the iclog.
- * - ic_forcesema is used to implement synchronous forcing of the iclog to disk.
+ * - ic_forcewait is used to implement synchronous forcing of the iclog to disk.
  * - ic_next is the pointer to the next iclog in the ring.
  * - ic_bp is a pointer to the buffer used to write this incore log to disk.
  * - ic_log is a pointer back to the global log structure.
@@ -339,8 +339,8 @@ typedef struct xlog_rec_ext_header {
  * and move everything else out to subsequent cachelines.
  */
 typedef struct xlog_iclog_fields {
-	sv_t			ic_forcesema;
-	sv_t			ic_writesema;
+	sv_t			ic_force_wait;
+	sv_t			ic_write_wait;
 	struct xlog_in_core	*ic_next;
 	struct xlog_in_core	*ic_prev;
 	struct xfs_buf		*ic_bp;
@@ -377,8 +377,8 @@ typedef struct xlog_in_core {
 /*
  * Defines to save our code from this glop.
  */
-#define	ic_forcesema	hic_fields.ic_forcesema
-#define ic_writesema	hic_fields.ic_writesema
+#define	ic_force_wait	hic_fields.ic_force_wait
+#define ic_write_wait	hic_fields.ic_write_wait
 #define	ic_next		hic_fields.ic_next
 #define	ic_prev		hic_fields.ic_prev
 #define	ic_bp		hic_fields.ic_bp
@@ -423,10 +423,8 @@ typedef struct log {
 	int			l_logBBsize;    /* size of log in BB chunks */
 
 	/* The following block of fields are changed while holding icloglock */
-	sema_t			l_flushsema ____cacheline_aligned_in_smp;
-						/* iclog flushing semaphore */
-	int			l_flushcnt;	/* # of procs waiting on this
-						 * sema */
+	sv_t			l_flush_wait ____cacheline_aligned_in_smp;
+						/* waiting for iclog flush */
 	int			l_covered_state;/* state of "covering disk
 						 * log entries" */
 	xlog_in_core_t		*l_iclog;       /* head log queue	*/
@@ -450,7 +448,6 @@ typedef struct log {
 	int			l_grant_write_bytes;
 
 #ifdef XFS_LOG_TRACE
-	struct ktrace		*l_trace;
 	struct ktrace		*l_grant_trace;
 #endif
 
@@ -470,7 +467,7 @@ extern int	 xlog_find_tail(xlog_t	*log,
 				xfs_daddr_t *head_blk,
 				xfs_daddr_t *tail_blk);
 extern int	 xlog_recover(xlog_t *log);
-extern int	 xlog_recover_finish(xlog_t *log, int mfsi_flags);
+extern int	 xlog_recover_finish(xlog_t *log);
 extern void	 xlog_pack_data(xlog_t *log, xlog_in_core_t *iclog, int);
 extern void	 xlog_recover_process_iunlinks(xlog_t *log);
 
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index e65ab4af095..82d46ce69d5 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1715,8 +1715,7 @@ xlog_check_buffer_cancelled(
 					} else {
 						prevp->bc_next = bcp->bc_next;
 					}
-					kmem_free(bcp,
-						  sizeof(xfs_buf_cancel_t));
+					kmem_free(bcp);
 				}
 			}
 			return 1;
@@ -2519,7 +2518,7 @@ write_inode_buffer:
 
 error:
 	if (need_free)
-		kmem_free(in_f, sizeof(*in_f));
+		kmem_free(in_f);
 	return XFS_ERROR(error);
 }
 
@@ -2830,16 +2829,14 @@ xlog_recover_free_trans(
 		item = item->ri_next;
 		 /* Free the regions in the item. */
 		for (i = 0; i < free_item->ri_cnt; i++) {
-			kmem_free(free_item->ri_buf[i].i_addr,
-				  free_item->ri_buf[i].i_len);
+			kmem_free(free_item->ri_buf[i].i_addr);
 		}
 		/* Free the item itself */
-		kmem_free(free_item->ri_buf,
-			  (free_item->ri_total * sizeof(xfs_log_iovec_t)));
-		kmem_free(free_item, sizeof(xlog_recover_item_t));
+		kmem_free(free_item->ri_buf);
+		kmem_free(free_item);
 	} while (first_item != item);
 	/* Free the transaction recover structure */
-	kmem_free(trans, sizeof(xlog_recover_t));
+	kmem_free(trans);
 }
 
 STATIC int
@@ -3786,8 +3783,7 @@ xlog_do_log_recovery(
 	error = xlog_do_recovery_pass(log, head_blk, tail_blk,
 				      XLOG_RECOVER_PASS1);
 	if (error != 0) {
-		kmem_free(log->l_buf_cancel_table,
-			  XLOG_BC_TABLE_SIZE * sizeof(xfs_buf_cancel_t*));
+		kmem_free(log->l_buf_cancel_table);
 		log->l_buf_cancel_table = NULL;
 		return error;
 	}
@@ -3806,8 +3802,7 @@ xlog_do_log_recovery(
 	}
 #endif	/* DEBUG */
 
-	kmem_free(log->l_buf_cancel_table,
-		  XLOG_BC_TABLE_SIZE * sizeof(xfs_buf_cancel_t*));
+	kmem_free(log->l_buf_cancel_table);
 	log->l_buf_cancel_table = NULL;
 
 	return error;
@@ -3945,8 +3940,7 @@ xlog_recover(
  */
 int
 xlog_recover_finish(
-	xlog_t		*log,
-	int		mfsi_flags)
+	xlog_t		*log)
 {
 	/*
 	 * Now we're ready to do the transactions needed for the
@@ -3974,9 +3968,7 @@ xlog_recover_finish(
 		xfs_log_force(log->l_mp, (xfs_lsn_t)0,
 			      (XFS_LOG_FORCE | XFS_LOG_SYNC));
 
-		if ( (mfsi_flags & XFS_MFSI_NOUNLINK) == 0 ) {
-			xlog_recover_process_iunlinks(log);
-		}
+		xlog_recover_process_iunlinks(log);
 
 		xlog_recover_check_summary(log);
 
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index da3988453b7..a4503f5e949 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -47,12 +47,10 @@
 
 STATIC int	xfs_mount_log_sb(xfs_mount_t *, __int64_t);
 STATIC int	xfs_uuid_mount(xfs_mount_t *);
-STATIC void	xfs_uuid_unmount(xfs_mount_t *mp);
 STATIC void	xfs_unmountfs_wait(xfs_mount_t *);
 
 
 #ifdef HAVE_PERCPU_SB
-STATIC void	xfs_icsb_destroy_counters(xfs_mount_t *);
 STATIC void	xfs_icsb_balance_counter(xfs_mount_t *, xfs_sb_field_t,
 						int);
 STATIC void	xfs_icsb_balance_counter_locked(xfs_mount_t *, xfs_sb_field_t,
@@ -63,7 +61,6 @@ STATIC void	xfs_icsb_disable_counter(xfs_mount_t *, xfs_sb_field_t);
 
 #else
 
-#define xfs_icsb_destroy_counters(mp)			do { } while (0)
 #define xfs_icsb_balance_counter(mp, a, b)		do { } while (0)
 #define xfs_icsb_balance_counter_locked(mp, a, b)	do { } while (0)
 #define xfs_icsb_modify_counters(mp, a, b, c)		do { } while (0)
@@ -126,34 +123,12 @@ static const struct {
 };
 
 /*
- * Return a pointer to an initialized xfs_mount structure.
- */
-xfs_mount_t *
-xfs_mount_init(void)
-{
-	xfs_mount_t *mp;
-
-	mp = kmem_zalloc(sizeof(xfs_mount_t), KM_SLEEP);
-
-	if (xfs_icsb_init_counters(mp)) {
-		mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB;
-	}
-
-	spin_lock_init(&mp->m_sb_lock);
-	mutex_init(&mp->m_ilock);
-	mutex_init(&mp->m_growlock);
-	atomic_set(&mp->m_active_trans, 0);
-
-	return mp;
-}
-
-/*
  * Free up the resources associated with a mount structure.  Assume that
  * the structure was initially zeroed, so we can tell which fields got
  * initialized.
  */
-void
-xfs_mount_free(
+STATIC void
+xfs_free_perag(
 	xfs_mount_t	*mp)
 {
 	if (mp->m_perag) {
@@ -161,28 +136,9 @@ xfs_mount_free(
 
 		for (agno = 0; agno < mp->m_maxagi; agno++)
 			if (mp->m_perag[agno].pagb_list)
-				kmem_free(mp->m_perag[agno].pagb_list,
-						sizeof(xfs_perag_busy_t) *
-							XFS_PAGB_NUM_SLOTS);
-		kmem_free(mp->m_perag,
-			  sizeof(xfs_perag_t) * mp->m_sb.sb_agcount);
+				kmem_free(mp->m_perag[agno].pagb_list);
+		kmem_free(mp->m_perag);
 	}
-
-	spinlock_destroy(&mp->m_ail_lock);
-	spinlock_destroy(&mp->m_sb_lock);
-	mutex_destroy(&mp->m_ilock);
-	mutex_destroy(&mp->m_growlock);
-	if (mp->m_quotainfo)
-		XFS_QM_DONE(mp);
-
-	if (mp->m_fsname != NULL)
-		kmem_free(mp->m_fsname, mp->m_fsname_len);
-	if (mp->m_rtname != NULL)
-		kmem_free(mp->m_rtname, strlen(mp->m_rtname) + 1);
-	if (mp->m_logname != NULL)
-		kmem_free(mp->m_logname, strlen(mp->m_logname) + 1);
-
-	xfs_icsb_destroy_counters(mp);
 }
 
 /*
@@ -288,6 +244,19 @@ xfs_mount_validate_sb(
 		return XFS_ERROR(EFSCORRUPTED);
 	}
 
+	/*
+	 * Until this is fixed only page-sized or smaller data blocks work.
+	 */
+	if (unlikely(sbp->sb_blocksize > PAGE_SIZE)) {
+		xfs_fs_mount_cmn_err(flags,
+			"file system with blocksize %d bytes",
+			sbp->sb_blocksize);
+		xfs_fs_mount_cmn_err(flags,
+			"only pagesize (%ld) or less will currently work.",
+			PAGE_SIZE);
+		return XFS_ERROR(ENOSYS);
+	}
+
 	if (xfs_sb_validate_fsb_count(sbp, sbp->sb_dblocks) ||
 	    xfs_sb_validate_fsb_count(sbp, sbp->sb_rblocks)) {
 		xfs_fs_mount_cmn_err(flags,
@@ -309,19 +278,6 @@ xfs_mount_validate_sb(
 		return XFS_ERROR(ENOSYS);
 	}
 
-	/*
-	 * Until this is fixed only page-sized or smaller data blocks work.
-	 */
-	if (unlikely(sbp->sb_blocksize > PAGE_SIZE)) {
-		xfs_fs_mount_cmn_err(flags,
-			"file system with blocksize %d bytes",
-			sbp->sb_blocksize);
-		xfs_fs_mount_cmn_err(flags,
-			"only pagesize (%ld) or less will currently work.",
-			PAGE_SIZE);
-		return XFS_ERROR(ENOSYS);
-	}
-
 	return 0;
 }
 
@@ -734,11 +690,11 @@ xfs_initialize_perag_data(xfs_mount_t *mp, xfs_agnumber_t agcount)
  * Update alignment values based on mount options and sb values
  */
 STATIC int
-xfs_update_alignment(xfs_mount_t *mp, int mfsi_flags, __uint64_t *update_flags)
+xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags)
 {
 	xfs_sb_t	*sbp = &(mp->m_sb);
 
-	if (mp->m_dalign && !(mfsi_flags & XFS_MFSI_SECOND)) {
+	if (mp->m_dalign) {
 		/*
 		 * If stripe unit and stripe width are not multiples
 		 * of the fs blocksize turn off alignment.
@@ -894,7 +850,7 @@ xfs_set_inoalignment(xfs_mount_t *mp)
  * Check that the data (and log if separate) are an ok size.
  */
 STATIC int
-xfs_check_sizes(xfs_mount_t *mp, int mfsi_flags)
+xfs_check_sizes(xfs_mount_t *mp)
 {
 	xfs_buf_t	*bp;
 	xfs_daddr_t	d;
@@ -917,8 +873,7 @@ xfs_check_sizes(xfs_mount_t *mp, int mfsi_flags)
 		return error;
 	}
 
-	if (((mfsi_flags & XFS_MFSI_CLIENT) == 0) &&
-	    mp->m_logdev_targp != mp->m_ddev_targp) {
+	if (mp->m_logdev_targp != mp->m_ddev_targp) {
 		d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
 		if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) {
 			cmn_err(CE_WARN, "XFS: size check 3 failed");
@@ -953,15 +908,13 @@ xfs_check_sizes(xfs_mount_t *mp, int mfsi_flags)
  */
 int
 xfs_mountfs(
-	xfs_mount_t	*mp,
-	int		mfsi_flags)
+	xfs_mount_t	*mp)
 {
 	xfs_sb_t	*sbp = &(mp->m_sb);
 	xfs_inode_t	*rip;
 	__uint64_t	resblks;
 	__int64_t	update_flags = 0LL;
 	uint		quotamount, quotaflags;
-	int		agno;
 	int		uuid_mounted = 0;
 	int		error = 0;
 
@@ -994,9 +947,19 @@ xfs_mountfs(
 		 * Re-check for ATTR2 in case it was found in bad_features2
 		 * slot.
 		 */
-		if (xfs_sb_version_hasattr2(&mp->m_sb))
+		if (xfs_sb_version_hasattr2(&mp->m_sb) &&
+		   !(mp->m_flags & XFS_MOUNT_NOATTR2))
 			mp->m_flags |= XFS_MOUNT_ATTR2;
+	}
+
+	if (xfs_sb_version_hasattr2(&mp->m_sb) &&
+	   (mp->m_flags & XFS_MOUNT_NOATTR2)) {
+		xfs_sb_version_removeattr2(&mp->m_sb);
+		update_flags |= XFS_SB_FEATURES2;
 
+		/* update sb_versionnum for the clearing of the morebits */
+		if (!sbp->sb_features2)
+			update_flags |= XFS_SB_VERSIONNUM;
 	}
 
 	/*
@@ -1005,7 +968,7 @@ xfs_mountfs(
 	 * allocator alignment is within an ag, therefore ag has
 	 * to be aligned at stripe boundary.
 	 */
-	error = xfs_update_alignment(mp, mfsi_flags, &update_flags);
+	error = xfs_update_alignment(mp, &update_flags);
 	if (error)
 		goto error1;
 
@@ -1024,8 +987,7 @@ xfs_mountfs(
 	 * since a single partition filesystem is identical to a single
 	 * partition volume/filesystem.
 	 */
-	if ((mfsi_flags & XFS_MFSI_SECOND) == 0 &&
-	    (mp->m_flags & XFS_MOUNT_NOUUID) == 0) {
+	if ((mp->m_flags & XFS_MOUNT_NOUUID) == 0) {
 		if (xfs_uuid_mount(mp)) {
 			error = XFS_ERROR(EINVAL);
 			goto error1;
@@ -1053,7 +1015,7 @@ xfs_mountfs(
 	/*
 	 * Check that the data (and log if separate) are an ok size.
 	 */
-	error = xfs_check_sizes(mp, mfsi_flags);
+	error = xfs_check_sizes(mp);
 	if (error)
 		goto error1;
 
@@ -1067,13 +1029,6 @@ xfs_mountfs(
 	}
 
 	/*
-	 * For client case we are done now
-	 */
-	if (mfsi_flags & XFS_MFSI_CLIENT) {
-		return 0;
-	}
-
-	/*
 	 *  Copies the low order bits of the timestamp and the randomly
 	 *  set "sequence" number out of a UUID.
 	 */
@@ -1097,8 +1052,10 @@ xfs_mountfs(
 	 * Allocate and initialize the per-ag data.
 	 */
 	init_rwsem(&mp->m_peraglock);
-	mp->m_perag =
-		kmem_zalloc(sbp->sb_agcount * sizeof(xfs_perag_t), KM_SLEEP);
+	mp->m_perag = kmem_zalloc(sbp->sb_agcount * sizeof(xfs_perag_t),
+				  KM_MAYFAIL);
+	if (!mp->m_perag)
+		goto error1;
 
 	mp->m_maxagi = xfs_initialize_perag(mp, sbp->sb_agcount);
 
@@ -1210,7 +1167,7 @@ xfs_mountfs(
 	 * delayed until after the root and real-time bitmap inodes
 	 * were consistently read in.
 	 */
-	error = xfs_log_mount_finish(mp, mfsi_flags);
+	error = xfs_log_mount_finish(mp);
 	if (error) {
 		cmn_err(CE_WARN, "XFS: log mount finish failed");
 		goto error4;
@@ -1219,7 +1176,7 @@ xfs_mountfs(
 	/*
 	 * Complete the quota initialisation, post-log-replay component.
 	 */
-	error = XFS_QM_MOUNT(mp, quotamount, quotaflags, mfsi_flags);
+	error = XFS_QM_MOUNT(mp, quotamount, quotaflags);
 	if (error)
 		goto error4;
 
@@ -1253,31 +1210,25 @@ xfs_mountfs(
  error3:
 	xfs_log_unmount_dealloc(mp);
  error2:
-	for (agno = 0; agno < sbp->sb_agcount; agno++)
-		if (mp->m_perag[agno].pagb_list)
-			kmem_free(mp->m_perag[agno].pagb_list,
-			  sizeof(xfs_perag_busy_t) * XFS_PAGB_NUM_SLOTS);
-	kmem_free(mp->m_perag, sbp->sb_agcount * sizeof(xfs_perag_t));
-	mp->m_perag = NULL;
-	/* FALLTHROUGH */
+	xfs_free_perag(mp);
  error1:
 	if (uuid_mounted)
-		xfs_uuid_unmount(mp);
-	xfs_freesb(mp);
+		uuid_table_remove(&mp->m_sb.sb_uuid);
 	return error;
 }
 
 /*
- * xfs_unmountfs
- *
  * This flushes out the inodes,dquots and the superblock, unmounts the
  * log and makes sure that incore structures are freed.
  */
-int
-xfs_unmountfs(xfs_mount_t *mp, struct cred *cr)
+void
+xfs_unmountfs(
+	struct xfs_mount	*mp)
 {
-	__uint64_t	resblks;
-	int		error = 0;
+	__uint64_t		resblks;
+	int			error;
+
+	IRELE(mp->m_rootip);
 
 	/*
 	 * We can potentially deadlock here if we have an inode cluster
@@ -1334,32 +1285,20 @@ xfs_unmountfs(xfs_mount_t *mp, struct cred *cr)
 	xfs_unmountfs_wait(mp); 		/* wait for async bufs */
 	xfs_log_unmount(mp);			/* Done! No more fs ops. */
 
-	xfs_freesb(mp);
-
 	/*
 	 * All inodes from this mount point should be freed.
 	 */
 	ASSERT(mp->m_inodes == NULL);
 
-	xfs_unmountfs_close(mp, cr);
 	if ((mp->m_flags & XFS_MOUNT_NOUUID) == 0)
-		xfs_uuid_unmount(mp);
+		uuid_table_remove(&mp->m_sb.sb_uuid);
 
-#if defined(DEBUG) || defined(INDUCE_IO_ERROR)
+#if defined(DEBUG)
 	xfs_errortag_clearall(mp, 0);
 #endif
-	xfs_mount_free(mp);
-	return 0;
-}
-
-void
-xfs_unmountfs_close(xfs_mount_t *mp, struct cred *cr)
-{
-	if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp)
-		xfs_free_buftarg(mp->m_logdev_targp, 1);
-	if (mp->m_rtdev_targp)
-		xfs_free_buftarg(mp->m_rtdev_targp, 1);
-	xfs_free_buftarg(mp->m_ddev_targp, 0);
+	xfs_free_perag(mp);
+	if (mp->m_quotainfo)
+		XFS_QM_DONE(mp);
 }
 
 STATIC void
@@ -1905,16 +1844,6 @@ xfs_uuid_mount(
 }
 
 /*
- * Remove filesystem from the UUID table.
- */
-STATIC void
-xfs_uuid_unmount(
-	xfs_mount_t	*mp)
-{
-	uuid_table_remove(&mp->m_sb.sb_uuid);
-}
-
-/*
  * Used to log changes to the superblock unit and width fields which could
  * be altered by the mount options, as well as any potential sb_features2
  * fixup. Only the first superblock is updated.
@@ -1928,7 +1857,8 @@ xfs_mount_log_sb(
 	int		error;
 
 	ASSERT(fields & (XFS_SB_UNIT | XFS_SB_WIDTH | XFS_SB_UUID |
-			 XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2));
+			 XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2 |
+			 XFS_SB_VERSIONNUM));
 
 	tp = xfs_trans_alloc(mp, XFS_TRANS_SB_UNIT);
 	error = xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0,
@@ -2109,7 +2039,7 @@ xfs_icsb_reinit_counters(
 	xfs_icsb_unlock(mp);
 }
 
-STATIC void
+void
 xfs_icsb_destroy_counters(
 	xfs_mount_t	*mp)
 {
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 63e0693a358..f3c1024b124 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -61,6 +61,7 @@ struct xfs_bmap_free;
 struct xfs_extdelta;
 struct xfs_swapext;
 struct xfs_mru_cache;
+struct xfs_nameops;
 
 /*
  * Prototypes and functions for the Data Migration subsystem.
@@ -113,7 +114,7 @@ struct xfs_dqtrxops;
 struct xfs_quotainfo;
 
 typedef int	(*xfs_qminit_t)(struct xfs_mount *, uint *, uint *);
-typedef int	(*xfs_qmmount_t)(struct xfs_mount *, uint, uint, int);
+typedef int	(*xfs_qmmount_t)(struct xfs_mount *, uint, uint);
 typedef int	(*xfs_qmunmount_t)(struct xfs_mount *);
 typedef void	(*xfs_qmdone_t)(struct xfs_mount *);
 typedef void	(*xfs_dqrele_t)(struct xfs_dquot *);
@@ -157,8 +158,8 @@ typedef struct xfs_qmops {
 
 #define XFS_QM_INIT(mp, mnt, fl) \
 	(*(mp)->m_qm_ops->xfs_qminit)(mp, mnt, fl)
-#define XFS_QM_MOUNT(mp, mnt, fl, mfsi_flags) \
-	(*(mp)->m_qm_ops->xfs_qmmount)(mp, mnt, fl, mfsi_flags)
+#define XFS_QM_MOUNT(mp, mnt, fl) \
+	(*(mp)->m_qm_ops->xfs_qmmount)(mp, mnt, fl)
 #define XFS_QM_UNMOUNT(mp) \
 	(*(mp)->m_qm_ops->xfs_qmunmount)(mp)
 #define XFS_QM_DONE(mp) \
@@ -210,12 +211,14 @@ typedef struct xfs_icsb_cnts {
 
 extern int	xfs_icsb_init_counters(struct xfs_mount *);
 extern void	xfs_icsb_reinit_counters(struct xfs_mount *);
+extern void	xfs_icsb_destroy_counters(struct xfs_mount *);
 extern void	xfs_icsb_sync_counters(struct xfs_mount *, int);
 extern void	xfs_icsb_sync_counters_locked(struct xfs_mount *, int);
 
 #else
-#define xfs_icsb_init_counters(mp)	(0)
-#define xfs_icsb_reinit_counters(mp)	do { } while (0)
+#define xfs_icsb_init_counters(mp)		(0)
+#define xfs_icsb_destroy_counters(mp)		do { } while (0)
+#define xfs_icsb_reinit_counters(mp)		do { } while (0)
 #define xfs_icsb_sync_counters(mp, flags)	do { } while (0)
 #define xfs_icsb_sync_counters_locked(mp, flags) do { } while (0)
 #endif
@@ -313,6 +316,7 @@ typedef struct xfs_mount {
 	__uint8_t		m_inode_quiesce;/* call quiesce on new inodes.
 						   field governed by m_ilock */
 	__uint8_t		m_sectbb_log;	/* sectlog - BBSHIFT */
+	const struct xfs_nameops *m_dirnameops;	/* vector of dir name ops */
 	int			m_dirblksize;	/* directory block sz--bytes */
 	int			m_dirblkfsbs;	/* directory block sz--fsbs */
 	xfs_dablk_t		m_dirdatablk;	/* blockno of dir data v2 */
@@ -378,6 +382,7 @@ typedef struct xfs_mount {
 						   counters */
 #define XFS_MOUNT_FILESTREAMS	(1ULL << 24)	/* enable the filestreams
 						   allocator */
+#define XFS_MOUNT_NOATTR2	(1ULL << 25)	/* disable use of attr2 format */
 
 
 /*
@@ -437,13 +442,6 @@ void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname,
 /*
  * Flags for xfs_mountfs
  */
-#define XFS_MFSI_SECOND		0x01	/* Secondary mount -- skip stuff */
-#define XFS_MFSI_CLIENT		0x02	/* Is a client -- skip lots of stuff */
-/*	XFS_MFSI_RRINODES	*/
-#define XFS_MFSI_NOUNLINK	0x08	/* Skip unlinked inode processing in */
-					/* log recovery */
-#define XFS_MFSI_NO_QUOTACHECK	0x10	/* Skip quotacheck processing */
-/*	XFS_MFSI_CONVERT_SUNIT	*/
 #define XFS_MFSI_QUIET		0x40	/* Be silent if mount errors found */
 
 #define XFS_DADDR_TO_AGNO(mp,d)         xfs_daddr_to_agno(mp,d)
@@ -510,15 +508,12 @@ typedef struct xfs_mod_sb {
 #define	XFS_MOUNT_ILOCK(mp)	mutex_lock(&((mp)->m_ilock))
 #define	XFS_MOUNT_IUNLOCK(mp)	mutex_unlock(&((mp)->m_ilock))
 
-extern xfs_mount_t *xfs_mount_init(void);
 extern void	xfs_mod_sb(xfs_trans_t *, __int64_t);
 extern int	xfs_log_sbcount(xfs_mount_t *, uint);
-extern void	xfs_mount_free(xfs_mount_t *mp);
-extern int	xfs_mountfs(xfs_mount_t *mp, int);
+extern int	xfs_mountfs(xfs_mount_t *mp);
 extern void	xfs_mountfs_check_barriers(xfs_mount_t *mp);
 
-extern int	xfs_unmountfs(xfs_mount_t *, struct cred *);
-extern void	xfs_unmountfs_close(xfs_mount_t *, struct cred *);
+extern void	xfs_unmountfs(xfs_mount_t *);
 extern int	xfs_unmountfs_writesb(xfs_mount_t *);
 extern int	xfs_unmount_flush(xfs_mount_t *, int);
 extern int	xfs_mod_incore_sb(xfs_mount_t *, xfs_sb_field_t, int64_t, int);
@@ -544,9 +539,6 @@ extern void	xfs_qmops_put(struct xfs_mount *);
 
 extern struct xfs_dmops xfs_dmcore_xfs;
 
-extern int	xfs_init(void);
-extern void	xfs_cleanup(void);
-
 #endif	/* __KERNEL__ */
 
 #endif	/* __XFS_MOUNT_H__ */
diff --git a/fs/xfs/xfs_mru_cache.c b/fs/xfs/xfs_mru_cache.c
index a0b2c0a2589..afee7eb2432 100644
--- a/fs/xfs/xfs_mru_cache.c
+++ b/fs/xfs/xfs_mru_cache.c
@@ -307,15 +307,18 @@ xfs_mru_cache_init(void)
 	xfs_mru_elem_zone = kmem_zone_init(sizeof(xfs_mru_cache_elem_t),
 	                                 "xfs_mru_cache_elem");
 	if (!xfs_mru_elem_zone)
-		return ENOMEM;
+		goto out;
 
 	xfs_mru_reap_wq = create_singlethread_workqueue("xfs_mru_cache");
-	if (!xfs_mru_reap_wq) {
-		kmem_zone_destroy(xfs_mru_elem_zone);
-		return ENOMEM;
-	}
+	if (!xfs_mru_reap_wq)
+		goto out_destroy_mru_elem_zone;
 
 	return 0;
+
+ out_destroy_mru_elem_zone:
+	kmem_zone_destroy(xfs_mru_elem_zone);
+ out:
+	return -ENOMEM;
 }
 
 void
@@ -382,9 +385,9 @@ xfs_mru_cache_create(
 
 exit:
 	if (err && mru && mru->lists)
-		kmem_free(mru->lists, mru->grp_count * sizeof(*mru->lists));
+		kmem_free(mru->lists);
 	if (err && mru)
-		kmem_free(mru, sizeof(*mru));
+		kmem_free(mru);
 
 	return err;
 }
@@ -424,8 +427,8 @@ xfs_mru_cache_destroy(
 
 	xfs_mru_cache_flush(mru);
 
-	kmem_free(mru->lists, mru->grp_count * sizeof(*mru->lists));
-	kmem_free(mru, sizeof(*mru));
+	kmem_free(mru->lists);
+	kmem_free(mru);
 }
 
 /*
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index d8063e1ad29..d700dacdb10 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -336,22 +336,18 @@ xfs_rename(
 		ASSERT(error != EEXIST);
 		if (error)
 			goto abort_return;
-		xfs_ichgtime(src_ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
-
-	} else {
-		/*
-		 * We always want to hit the ctime on the source inode.
-		 * We do it in the if clause above for the 'new_parent &&
-		 * src_is_directory' case, and here we get all the other
-		 * cases.  This isn't strictly required by the standards
-		 * since the source inode isn't really being changed,
-		 * but old unix file systems did it and some incremental
-		 * backup programs won't work without it.
-		 */
-		xfs_ichgtime(src_ip, XFS_ICHGTIME_CHG);
 	}
 
 	/*
+	 * We always want to hit the ctime on the source inode.
+	 *
+	 * This isn't strictly required by the standards since the source
+	 * inode isn't really being changed, but old unix file systems did
+	 * it and some incremental backup programs won't work without it.
+	 */
+	xfs_ichgtime(src_ip, XFS_ICHGTIME_CHG);
+
+	/*
 	 * Adjust the link count on src_dp.  This is necessary when
 	 * renaming a directory, either within one parent when
 	 * the target existed, or across two parent directories.
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index a0dc6e5bc5b..e2f68de1615 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -74,18 +74,6 @@ STATIC int xfs_rtmodify_summary(xfs_mount_t *, xfs_trans_t *, int,
  */
 
 /*
- * xfs_lowbit32: get low bit set out of 32-bit argument, -1 if none set.
- */
-STATIC int
-xfs_lowbit32(
-	__uint32_t	v)
-{
-	if (v)
-		return ffs(v) - 1;
-	return -1;
-}
-
-/*
  * Allocate space to the bitmap or summary file, and zero it, for growfs.
  */
 STATIC int				/* error */
@@ -450,6 +438,7 @@ xfs_rtallocate_extent_near(
 	}
 	bbno = XFS_BITTOBLOCK(mp, bno);
 	i = 0;
+	ASSERT(minlen != 0);
 	log2len = xfs_highbit32(minlen);
 	/*
 	 * Loop over all bitmap blocks (bbno + i is current block).
@@ -618,6 +607,8 @@ xfs_rtallocate_extent_size(
 	xfs_suminfo_t	sum;		/* summary information for extents */
 
 	ASSERT(minlen % prod == 0 && maxlen % prod == 0);
+	ASSERT(maxlen != 0);
+
 	/*
 	 * Loop over all the levels starting with maxlen.
 	 * At each level, look at all the bitmap blocks, to see if there
@@ -675,6 +666,9 @@ xfs_rtallocate_extent_size(
 		*rtblock = NULLRTBLOCK;
 		return 0;
 	}
+	ASSERT(minlen != 0);
+	ASSERT(maxlen != 0);
+
 	/*
 	 * Loop over sizes, from maxlen down to minlen.
 	 * This time, when we do the allocations, allow smaller ones
@@ -1961,6 +1955,7 @@ xfs_growfs_rt(
 				  nsbp->sb_blocksize * nsbp->sb_rextsize);
 		nsbp->sb_rextents = nsbp->sb_rblocks;
 		do_div(nsbp->sb_rextents, nsbp->sb_rextsize);
+		ASSERT(nsbp->sb_rextents != 0);
 		nsbp->sb_rextslog = xfs_highbit32(nsbp->sb_rextents);
 		nrsumlevels = nmp->m_rsumlevels = nsbp->sb_rextslog + 1;
 		nrsumsize =
@@ -2062,7 +2057,7 @@ xfs_growfs_rt(
 	/*
 	 * Free the fake mp structure.
 	 */
-	kmem_free(nmp, sizeof(*nmp));
+	kmem_free(nmp);
 
 	return error;
 }
diff --git a/fs/xfs/xfs_rw.c b/fs/xfs/xfs_rw.c
index b0f31c09a76..3a82576dde9 100644
--- a/fs/xfs/xfs_rw.c
+++ b/fs/xfs/xfs_rw.c
@@ -314,7 +314,7 @@ xfs_bioerror_relse(
 		 * ASYNC buffers.
 		 */
 		XFS_BUF_ERROR(bp, EIO);
-		XFS_BUF_V_IODONESEMA(bp);
+		XFS_BUF_FINISH_IOWAIT(bp);
 	} else {
 		xfs_buf_relse(bp);
 	}
diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h
index d904efe7f87..3f8cf1587f4 100644
--- a/fs/xfs/xfs_sb.h
+++ b/fs/xfs/xfs_sb.h
@@ -46,10 +46,12 @@ struct xfs_mount;
 #define XFS_SB_VERSION_SECTORBIT	0x0800
 #define	XFS_SB_VERSION_EXTFLGBIT	0x1000
 #define	XFS_SB_VERSION_DIRV2BIT		0x2000
+#define	XFS_SB_VERSION_BORGBIT		0x4000	/* ASCII only case-insens. */
 #define	XFS_SB_VERSION_MOREBITSBIT	0x8000
 #define	XFS_SB_VERSION_OKSASHFBITS	\
 	(XFS_SB_VERSION_EXTFLGBIT | \
-	 XFS_SB_VERSION_DIRV2BIT)
+	 XFS_SB_VERSION_DIRV2BIT | \
+	 XFS_SB_VERSION_BORGBIT)
 #define	XFS_SB_VERSION_OKREALFBITS	\
 	(XFS_SB_VERSION_ATTRBIT | \
 	 XFS_SB_VERSION_NLINKBIT | \
@@ -437,6 +439,12 @@ static inline int xfs_sb_version_hassector(xfs_sb_t *sbp)
 		((sbp)->sb_versionnum & XFS_SB_VERSION_SECTORBIT);
 }
 
+static inline int xfs_sb_version_hasasciici(xfs_sb_t *sbp)
+{
+	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
+		(sbp->sb_versionnum & XFS_SB_VERSION_BORGBIT);
+}
+
 static inline int xfs_sb_version_hasmorebits(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
@@ -473,6 +481,13 @@ static inline void xfs_sb_version_addattr2(xfs_sb_t *sbp)
 		((sbp)->sb_features2 | XFS_SB_VERSION2_ATTR2BIT)));
 }
 
+static inline void xfs_sb_version_removeattr2(xfs_sb_t *sbp)
+{
+	sbp->sb_features2 &= ~XFS_SB_VERSION2_ATTR2BIT;
+	if (!sbp->sb_features2)
+		sbp->sb_versionnum &= ~XFS_SB_VERSION_MOREBITSBIT;
+}
+
 /*
  * end of superblock version macros
  */
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 140386434aa..4e1c22a23be 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -43,6 +43,7 @@
 #include "xfs_quota.h"
 #include "xfs_trans_priv.h"
 #include "xfs_trans_space.h"
+#include "xfs_inode_item.h"
 
 
 STATIC void	xfs_trans_apply_sb_deltas(xfs_trans_t *);
@@ -253,7 +254,7 @@ _xfs_trans_alloc(
 	tp->t_mountp = mp;
 	tp->t_items_free = XFS_LIC_NUM_SLOTS;
 	tp->t_busy_free = XFS_LBC_NUM_SLOTS;
-	XFS_LIC_INIT(&(tp->t_items));
+	xfs_lic_init(&(tp->t_items));
 	XFS_LBC_INIT(&(tp->t_busy));
 	return tp;
 }
@@ -282,7 +283,7 @@ xfs_trans_dup(
 	ntp->t_mountp = tp->t_mountp;
 	ntp->t_items_free = XFS_LIC_NUM_SLOTS;
 	ntp->t_busy_free = XFS_LBC_NUM_SLOTS;
-	XFS_LIC_INIT(&(ntp->t_items));
+	xfs_lic_init(&(ntp->t_items));
 	XFS_LBC_INIT(&(ntp->t_busy));
 
 	ASSERT(tp->t_flags & XFS_TRANS_PERM_LOG_RES);
@@ -889,7 +890,7 @@ shut_us_down:
 
 	tp->t_commit_lsn = commit_lsn;
 	if (nvec > XFS_TRANS_LOGVEC_COUNT) {
-		kmem_free(log_vector, nvec * sizeof(xfs_log_iovec_t));
+		kmem_free(log_vector);
 	}
 
 	/*
@@ -1169,7 +1170,7 @@ xfs_trans_cancel(
 		while (licp != NULL) {
 			lidp = licp->lic_descs;
 			for (i = 0; i < licp->lic_unused; i++, lidp++) {
-				if (XFS_LIC_ISFREE(licp, i)) {
+				if (xfs_lic_isfree(licp, i)) {
 					continue;
 				}
 
@@ -1216,6 +1217,68 @@ xfs_trans_free(
 	kmem_zone_free(xfs_trans_zone, tp);
 }
 
+/*
+ * Roll from one trans in the sequence of PERMANENT transactions to
+ * the next: permanent transactions are only flushed out when
+ * committed with XFS_TRANS_RELEASE_LOG_RES, but we still want as soon
+ * as possible to let chunks of it go to the log. So we commit the
+ * chunk we've been working on and get a new transaction to continue.
+ */
+int
+xfs_trans_roll(
+	struct xfs_trans	**tpp,
+	struct xfs_inode	*dp)
+{
+	struct xfs_trans	*trans;
+	unsigned int		logres, count;
+	int			error;
+
+	/*
+	 * Ensure that the inode is always logged.
+	 */
+	trans = *tpp;
+	xfs_trans_log_inode(trans, dp, XFS_ILOG_CORE);
+
+	/*
+	 * Copy the critical parameters from one trans to the next.
+	 */
+	logres = trans->t_log_res;
+	count = trans->t_log_count;
+	*tpp = xfs_trans_dup(trans);
+
+	/*
+	 * Commit the current transaction.
+	 * If this commit failed, then it'd just unlock those items that
+	 * are not marked ihold. That also means that a filesystem shutdown
+	 * is in progress. The caller takes the responsibility to cancel
+	 * the duplicate transaction that gets returned.
+	 */
+	error = xfs_trans_commit(trans, 0);
+	if (error)
+		return (error);
+
+	trans = *tpp;
+
+	/*
+	 * Reserve space in the log for th next transaction.
+	 * This also pushes items in the "AIL", the list of logged items,
+	 * out to disk if they are taking up space at the tail of the log
+	 * that we want to use.  This requires that either nothing be locked
+	 * across this call, or that anything that is locked be logged in
+	 * the prior and the next transactions.
+	 */
+	error = xfs_trans_reserve(trans, 0, logres, 0,
+				  XFS_TRANS_PERM_LOG_RES, count);
+	/*
+	 *  Ensure that the inode is in the new transaction and locked.
+	 */
+	if (error)
+		return error;
+
+	xfs_trans_ijoin(trans, dp, XFS_ILOCK_EXCL);
+	xfs_trans_ihold(trans, dp);
+	return 0;
+}
 
 /*
  * THIS SHOULD BE REWRITTEN TO USE xfs_trans_next_item().
@@ -1253,7 +1316,7 @@ xfs_trans_committed(
 	 * Special case the chunk embedded in the transaction.
 	 */
 	licp = &(tp->t_items);
-	if (!(XFS_LIC_ARE_ALL_FREE(licp))) {
+	if (!(xfs_lic_are_all_free(licp))) {
 		xfs_trans_chunk_committed(licp, tp->t_lsn, abortflag);
 	}
 
@@ -1262,10 +1325,10 @@ xfs_trans_committed(
 	 */
 	licp = licp->lic_next;
 	while (licp != NULL) {
-		ASSERT(!XFS_LIC_ARE_ALL_FREE(licp));
+		ASSERT(!xfs_lic_are_all_free(licp));
 		xfs_trans_chunk_committed(licp, tp->t_lsn, abortflag);
 		next_licp = licp->lic_next;
-		kmem_free(licp, sizeof(xfs_log_item_chunk_t));
+		kmem_free(licp);
 		licp = next_licp;
 	}
 
@@ -1325,7 +1388,7 @@ xfs_trans_chunk_committed(
 
 	lidp = licp->lic_descs;
 	for (i = 0; i < licp->lic_unused; i++, lidp++) {
-		if (XFS_LIC_ISFREE(licp, i)) {
+		if (xfs_lic_isfree(licp, i)) {
 			continue;
 		}
 
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 0804207c739..74c80bd2b0e 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -210,62 +210,52 @@ typedef struct xfs_log_item_chunk {
  * lic_unused to the right value (0 matches all free).  The
  * lic_descs.lid_index values are set up as each desc is allocated.
  */
-#define	XFS_LIC_INIT(cp)	xfs_lic_init(cp)
 static inline void xfs_lic_init(xfs_log_item_chunk_t *cp)
 {
 	cp->lic_free = XFS_LIC_FREEMASK;
 }
 
-#define	XFS_LIC_INIT_SLOT(cp,slot)	xfs_lic_init_slot(cp, slot)
 static inline void xfs_lic_init_slot(xfs_log_item_chunk_t *cp, int slot)
 {
 	cp->lic_descs[slot].lid_index = (unsigned char)(slot);
 }
 
-#define	XFS_LIC_VACANCY(cp)		xfs_lic_vacancy(cp)
 static inline int xfs_lic_vacancy(xfs_log_item_chunk_t *cp)
 {
 	return cp->lic_free & XFS_LIC_FREEMASK;
 }
 
-#define	XFS_LIC_ALL_FREE(cp)		xfs_lic_all_free(cp)
 static inline void xfs_lic_all_free(xfs_log_item_chunk_t *cp)
 {
 	cp->lic_free = XFS_LIC_FREEMASK;
 }
 
-#define	XFS_LIC_ARE_ALL_FREE(cp)	xfs_lic_are_all_free(cp)
 static inline int xfs_lic_are_all_free(xfs_log_item_chunk_t *cp)
 {
 	return ((cp->lic_free & XFS_LIC_FREEMASK) == XFS_LIC_FREEMASK);
 }
 
-#define	XFS_LIC_ISFREE(cp,slot)	xfs_lic_isfree(cp,slot)
 static inline int xfs_lic_isfree(xfs_log_item_chunk_t *cp, int slot)
 {
 	return (cp->lic_free & (1 << slot));
 }
 
-#define	XFS_LIC_CLAIM(cp,slot)		xfs_lic_claim(cp,slot)
 static inline void xfs_lic_claim(xfs_log_item_chunk_t *cp, int slot)
 {
 	cp->lic_free &= ~(1 << slot);
 }
 
-#define	XFS_LIC_RELSE(cp,slot)		xfs_lic_relse(cp,slot)
 static inline void xfs_lic_relse(xfs_log_item_chunk_t *cp, int slot)
 {
 	cp->lic_free |= 1 << slot;
 }
 
-#define	XFS_LIC_SLOT(cp,slot)		xfs_lic_slot(cp,slot)
 static inline xfs_log_item_desc_t *
 xfs_lic_slot(xfs_log_item_chunk_t *cp, int slot)
 {
 	return &(cp->lic_descs[slot]);
 }
 
-#define	XFS_LIC_DESC_TO_SLOT(dp)	xfs_lic_desc_to_slot(dp)
 static inline int xfs_lic_desc_to_slot(xfs_log_item_desc_t *dp)
 {
 	return (uint)dp->lid_index;
@@ -278,7 +268,6 @@ static inline int xfs_lic_desc_to_slot(xfs_log_item_desc_t *dp)
  * All of this yields the address of the chunk, which is
  * cast to a chunk pointer.
  */
-#define	XFS_LIC_DESC_TO_CHUNK(dp)	xfs_lic_desc_to_chunk(dp)
 static inline xfs_log_item_chunk_t *
 xfs_lic_desc_to_chunk(xfs_log_item_desc_t *dp)
 {
@@ -986,6 +975,7 @@ int		_xfs_trans_commit(xfs_trans_t *,
 				  int *);
 #define xfs_trans_commit(tp, flags)	_xfs_trans_commit(tp, flags, NULL)
 void		xfs_trans_cancel(xfs_trans_t *, int);
+int		xfs_trans_roll(struct xfs_trans **, struct xfs_inode *);
 int		xfs_trans_ail_init(struct xfs_mount *);
 void		xfs_trans_ail_destroy(struct xfs_mount *);
 void		xfs_trans_push_ail(struct xfs_mount *, xfs_lsn_t);
diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c
index cb0c5839154..4e855b5ced6 100644
--- a/fs/xfs/xfs_trans_buf.c
+++ b/fs/xfs/xfs_trans_buf.c
@@ -1021,16 +1021,16 @@ xfs_trans_buf_item_match(
 	bp = NULL;
 	len = BBTOB(len);
 	licp = &tp->t_items;
-	if (!XFS_LIC_ARE_ALL_FREE(licp)) {
+	if (!xfs_lic_are_all_free(licp)) {
 		for (i = 0; i < licp->lic_unused; i++) {
 			/*
 			 * Skip unoccupied slots.
 			 */
-			if (XFS_LIC_ISFREE(licp, i)) {
+			if (xfs_lic_isfree(licp, i)) {
 				continue;
 			}
 
-			lidp = XFS_LIC_SLOT(licp, i);
+			lidp = xfs_lic_slot(licp, i);
 			blip = (xfs_buf_log_item_t *)lidp->lid_item;
 			if (blip->bli_item.li_type != XFS_LI_BUF) {
 				continue;
@@ -1074,7 +1074,7 @@ xfs_trans_buf_item_match_all(
 	bp = NULL;
 	len = BBTOB(len);
 	for (licp = &tp->t_items; licp != NULL; licp = licp->lic_next) {
-		if (XFS_LIC_ARE_ALL_FREE(licp)) {
+		if (xfs_lic_are_all_free(licp)) {
 			ASSERT(licp == &tp->t_items);
 			ASSERT(licp->lic_next == NULL);
 			return NULL;
@@ -1083,11 +1083,11 @@ xfs_trans_buf_item_match_all(
 			/*
 			 * Skip unoccupied slots.
 			 */
-			if (XFS_LIC_ISFREE(licp, i)) {
+			if (xfs_lic_isfree(licp, i)) {
 				continue;
 			}
 
-			lidp = XFS_LIC_SLOT(licp, i);
+			lidp = xfs_lic_slot(licp, i);
 			blip = (xfs_buf_log_item_t *)lidp->lid_item;
 			if (blip->bli_item.li_type != XFS_LI_BUF) {
 				continue;
diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c
index 4c70bf5e998..2a1c0f071f9 100644
--- a/fs/xfs/xfs_trans_inode.c
+++ b/fs/xfs/xfs_trans_inode.c
@@ -291,7 +291,7 @@ xfs_trans_inode_broot_debug(
 	iip = ip->i_itemp;
 	if (iip->ili_root_size != 0) {
 		ASSERT(iip->ili_orig_root != NULL);
-		kmem_free(iip->ili_orig_root, iip->ili_root_size);
+		kmem_free(iip->ili_orig_root);
 		iip->ili_root_size = 0;
 		iip->ili_orig_root = NULL;
 	}
diff --git a/fs/xfs/xfs_trans_item.c b/fs/xfs/xfs_trans_item.c
index 66a09f0d894..3c666e8317f 100644
--- a/fs/xfs/xfs_trans_item.c
+++ b/fs/xfs/xfs_trans_item.c
@@ -53,11 +53,11 @@ xfs_trans_add_item(xfs_trans_t *tp, xfs_log_item_t *lip)
 		 * Initialize the chunk, and then
 		 * claim the first slot in the newly allocated chunk.
 		 */
-		XFS_LIC_INIT(licp);
-		XFS_LIC_CLAIM(licp, 0);
+		xfs_lic_init(licp);
+		xfs_lic_claim(licp, 0);
 		licp->lic_unused = 1;
-		XFS_LIC_INIT_SLOT(licp, 0);
-		lidp = XFS_LIC_SLOT(licp, 0);
+		xfs_lic_init_slot(licp, 0);
+		lidp = xfs_lic_slot(licp, 0);
 
 		/*
 		 * Link in the new chunk and update the free count.
@@ -88,14 +88,14 @@ xfs_trans_add_item(xfs_trans_t *tp, xfs_log_item_t *lip)
 	 */
 	licp = &tp->t_items;
 	while (licp != NULL) {
-		if (XFS_LIC_VACANCY(licp)) {
+		if (xfs_lic_vacancy(licp)) {
 			if (licp->lic_unused <= XFS_LIC_MAX_SLOT) {
 				i = licp->lic_unused;
-				ASSERT(XFS_LIC_ISFREE(licp, i));
+				ASSERT(xfs_lic_isfree(licp, i));
 				break;
 			}
 			for (i = 0; i <= XFS_LIC_MAX_SLOT; i++) {
-				if (XFS_LIC_ISFREE(licp, i))
+				if (xfs_lic_isfree(licp, i))
 					break;
 			}
 			ASSERT(i <= XFS_LIC_MAX_SLOT);
@@ -108,12 +108,12 @@ xfs_trans_add_item(xfs_trans_t *tp, xfs_log_item_t *lip)
 	 * If we find a free descriptor, claim it,
 	 * initialize it, and return it.
 	 */
-	XFS_LIC_CLAIM(licp, i);
+	xfs_lic_claim(licp, i);
 	if (licp->lic_unused <= i) {
 		licp->lic_unused = i + 1;
-		XFS_LIC_INIT_SLOT(licp, i);
+		xfs_lic_init_slot(licp, i);
 	}
-	lidp = XFS_LIC_SLOT(licp, i);
+	lidp = xfs_lic_slot(licp, i);
 	tp->t_items_free--;
 	lidp->lid_item = lip;
 	lidp->lid_flags = 0;
@@ -136,9 +136,9 @@ xfs_trans_free_item(xfs_trans_t	*tp, xfs_log_item_desc_t *lidp)
 	xfs_log_item_chunk_t	*licp;
 	xfs_log_item_chunk_t	**licpp;
 
-	slot = XFS_LIC_DESC_TO_SLOT(lidp);
-	licp = XFS_LIC_DESC_TO_CHUNK(lidp);
-	XFS_LIC_RELSE(licp, slot);
+	slot = xfs_lic_desc_to_slot(lidp);
+	licp = xfs_lic_desc_to_chunk(lidp);
+	xfs_lic_relse(licp, slot);
 	lidp->lid_item->li_desc = NULL;
 	tp->t_items_free++;
 
@@ -154,14 +154,14 @@ xfs_trans_free_item(xfs_trans_t	*tp, xfs_log_item_desc_t *lidp)
 	 * Also decrement the transaction structure's count of free items
 	 * by the number in a chunk since we are freeing an empty chunk.
 	 */
-	if (XFS_LIC_ARE_ALL_FREE(licp) && (licp != &(tp->t_items))) {
+	if (xfs_lic_are_all_free(licp) && (licp != &(tp->t_items))) {
 		licpp = &(tp->t_items.lic_next);
 		while (*licpp != licp) {
 			ASSERT(*licpp != NULL);
 			licpp = &((*licpp)->lic_next);
 		}
 		*licpp = licp->lic_next;
-		kmem_free(licp, sizeof(xfs_log_item_chunk_t));
+		kmem_free(licp);
 		tp->t_items_free -= XFS_LIC_NUM_SLOTS;
 	}
 }
@@ -207,20 +207,20 @@ xfs_trans_first_item(xfs_trans_t *tp)
 	/*
 	 * If it's not in the first chunk, skip to the second.
 	 */
-	if (XFS_LIC_ARE_ALL_FREE(licp)) {
+	if (xfs_lic_are_all_free(licp)) {
 		licp = licp->lic_next;
 	}
 
 	/*
 	 * Return the first non-free descriptor in the chunk.
 	 */
-	ASSERT(!XFS_LIC_ARE_ALL_FREE(licp));
+	ASSERT(!xfs_lic_are_all_free(licp));
 	for (i = 0; i < licp->lic_unused; i++) {
-		if (XFS_LIC_ISFREE(licp, i)) {
+		if (xfs_lic_isfree(licp, i)) {
 			continue;
 		}
 
-		return XFS_LIC_SLOT(licp, i);
+		return xfs_lic_slot(licp, i);
 	}
 	cmn_err(CE_WARN, "xfs_trans_first_item() -- no first item");
 	return NULL;
@@ -242,18 +242,18 @@ xfs_trans_next_item(xfs_trans_t *tp, xfs_log_item_desc_t *lidp)
 	xfs_log_item_chunk_t	*licp;
 	int			i;
 
-	licp = XFS_LIC_DESC_TO_CHUNK(lidp);
+	licp = xfs_lic_desc_to_chunk(lidp);
 
 	/*
 	 * First search the rest of the chunk. The for loop keeps us
 	 * from referencing things beyond the end of the chunk.
 	 */
-	for (i = (int)XFS_LIC_DESC_TO_SLOT(lidp) + 1; i < licp->lic_unused; i++) {
-		if (XFS_LIC_ISFREE(licp, i)) {
+	for (i = (int)xfs_lic_desc_to_slot(lidp) + 1; i < licp->lic_unused; i++) {
+		if (xfs_lic_isfree(licp, i)) {
 			continue;
 		}
 
-		return XFS_LIC_SLOT(licp, i);
+		return xfs_lic_slot(licp, i);
 	}
 
 	/*
@@ -266,13 +266,13 @@ xfs_trans_next_item(xfs_trans_t *tp, xfs_log_item_desc_t *lidp)
 	}
 
 	licp = licp->lic_next;
-	ASSERT(!XFS_LIC_ARE_ALL_FREE(licp));
+	ASSERT(!xfs_lic_are_all_free(licp));
 	for (i = 0; i < licp->lic_unused; i++) {
-		if (XFS_LIC_ISFREE(licp, i)) {
+		if (xfs_lic_isfree(licp, i)) {
 			continue;
 		}
 
-		return XFS_LIC_SLOT(licp, i);
+		return xfs_lic_slot(licp, i);
 	}
 	ASSERT(0);
 	/* NOTREACHED */
@@ -300,9 +300,9 @@ xfs_trans_free_items(
 	/*
 	 * Special case the embedded chunk so we don't free it below.
 	 */
-	if (!XFS_LIC_ARE_ALL_FREE(licp)) {
+	if (!xfs_lic_are_all_free(licp)) {
 		(void) xfs_trans_unlock_chunk(licp, 1, abort, NULLCOMMITLSN);
-		XFS_LIC_ALL_FREE(licp);
+		xfs_lic_all_free(licp);
 		licp->lic_unused = 0;
 	}
 	licp = licp->lic_next;
@@ -311,10 +311,10 @@ xfs_trans_free_items(
 	 * Unlock each item in each chunk and free the chunks.
 	 */
 	while (licp != NULL) {
-		ASSERT(!XFS_LIC_ARE_ALL_FREE(licp));
+		ASSERT(!xfs_lic_are_all_free(licp));
 		(void) xfs_trans_unlock_chunk(licp, 1, abort, NULLCOMMITLSN);
 		next_licp = licp->lic_next;
-		kmem_free(licp, sizeof(xfs_log_item_chunk_t));
+		kmem_free(licp);
 		licp = next_licp;
 	}
 
@@ -347,7 +347,7 @@ xfs_trans_unlock_items(xfs_trans_t *tp, xfs_lsn_t commit_lsn)
 	/*
 	 * Special case the embedded chunk so we don't free.
 	 */
-	if (!XFS_LIC_ARE_ALL_FREE(licp)) {
+	if (!xfs_lic_are_all_free(licp)) {
 		freed = xfs_trans_unlock_chunk(licp, 0, 0, commit_lsn);
 	}
 	licpp = &(tp->t_items.lic_next);
@@ -358,12 +358,12 @@ xfs_trans_unlock_items(xfs_trans_t *tp, xfs_lsn_t commit_lsn)
 	 * and free empty chunks.
 	 */
 	while (licp != NULL) {
-		ASSERT(!XFS_LIC_ARE_ALL_FREE(licp));
+		ASSERT(!xfs_lic_are_all_free(licp));
 		freed += xfs_trans_unlock_chunk(licp, 0, 0, commit_lsn);
 		next_licp = licp->lic_next;
-		if (XFS_LIC_ARE_ALL_FREE(licp)) {
+		if (xfs_lic_are_all_free(licp)) {
 			*licpp = next_licp;
-			kmem_free(licp, sizeof(xfs_log_item_chunk_t));
+			kmem_free(licp);
 			freed -= XFS_LIC_NUM_SLOTS;
 		} else {
 			licpp = &(licp->lic_next);
@@ -402,7 +402,7 @@ xfs_trans_unlock_chunk(
 	freed = 0;
 	lidp = licp->lic_descs;
 	for (i = 0; i < licp->lic_unused; i++, lidp++) {
-		if (XFS_LIC_ISFREE(licp, i)) {
+		if (xfs_lic_isfree(licp, i)) {
 			continue;
 		}
 		lip = lidp->lid_item;
@@ -421,7 +421,7 @@ xfs_trans_unlock_chunk(
 		 */
 		if (!(freeing_chunk) &&
 		    (!(lidp->lid_flags & XFS_LID_DIRTY) || abort)) {
-			XFS_LIC_RELSE(licp, i);
+			xfs_lic_relse(licp, i);
 			freed++;
 		}
 	}
@@ -530,7 +530,7 @@ xfs_trans_free_busy(xfs_trans_t *tp)
 	lbcp = tp->t_busy.lbc_next;
 	while (lbcp != NULL) {
 		lbcq = lbcp->lbc_next;
-		kmem_free(lbcp, sizeof(xfs_log_busy_chunk_t));
+		kmem_free(lbcp);
 		lbcp = lbcq;
 	}
 
diff --git a/fs/xfs/xfs_utils.c b/fs/xfs/xfs_utils.c
index 98e5f110ba5..35d4d414bcc 100644
--- a/fs/xfs/xfs_utils.c
+++ b/fs/xfs/xfs_utils.c
@@ -237,7 +237,7 @@ xfs_droplink(
 
 	ASSERT (ip->i_d.di_nlink > 0);
 	ip->i_d.di_nlink--;
-	drop_nlink(ip->i_vnode);
+	drop_nlink(VFS_I(ip));
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 
 	error = 0;
@@ -301,7 +301,7 @@ xfs_bumplink(
 
 	ASSERT(ip->i_d.di_nlink > 0);
 	ip->i_d.di_nlink++;
-	inc_nlink(ip->i_vnode);
+	inc_nlink(VFS_I(ip));
 	if ((ip->i_d.di_version == XFS_DINODE_VERSION_1) &&
 	    (ip->i_d.di_nlink > XFS_MAXLINK_1)) {
 		/*
diff --git a/fs/xfs/xfs_utils.h b/fs/xfs/xfs_utils.h
index f316cb85d8e..ef321225d26 100644
--- a/fs/xfs/xfs_utils.h
+++ b/fs/xfs/xfs_utils.h
@@ -18,9 +18,6 @@
 #ifndef __XFS_UTILS_H__
 #define __XFS_UTILS_H__
 
-#define IRELE(ip)	VN_RELE(XFS_ITOV(ip))
-#define IHOLD(ip)	VN_HOLD(XFS_ITOV(ip))
-
 extern int xfs_truncate_file(xfs_mount_t *, xfs_inode_t *);
 extern int xfs_dir_ialloc(xfs_trans_t **, xfs_inode_t *, mode_t, xfs_nlink_t,
 				xfs_dev_t, cred_t *, prid_t, int,
diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c
index 30bacd8bb0e..439dd3939dd 100644
--- a/fs/xfs/xfs_vfsops.c
+++ b/fs/xfs/xfs_vfsops.c
@@ -58,586 +58,6 @@
 #include "xfs_utils.h"
 
 
-int __init
-xfs_init(void)
-{
-#ifdef XFS_DABUF_DEBUG
-	extern spinlock_t        xfs_dabuf_global_lock;
-	spin_lock_init(&xfs_dabuf_global_lock);
-#endif
-
-	/*
-	 * Initialize all of the zone allocators we use.
-	 */
-	xfs_log_ticket_zone = kmem_zone_init(sizeof(xlog_ticket_t),
-						"xfs_log_ticket");
-	xfs_bmap_free_item_zone = kmem_zone_init(sizeof(xfs_bmap_free_item_t),
-						"xfs_bmap_free_item");
-	xfs_btree_cur_zone = kmem_zone_init(sizeof(xfs_btree_cur_t),
-						"xfs_btree_cur");
-	xfs_da_state_zone = kmem_zone_init(sizeof(xfs_da_state_t),
-						"xfs_da_state");
-	xfs_dabuf_zone = kmem_zone_init(sizeof(xfs_dabuf_t), "xfs_dabuf");
-	xfs_ifork_zone = kmem_zone_init(sizeof(xfs_ifork_t), "xfs_ifork");
-	xfs_trans_zone = kmem_zone_init(sizeof(xfs_trans_t), "xfs_trans");
-	xfs_acl_zone_init(xfs_acl_zone, "xfs_acl");
-	xfs_mru_cache_init();
-	xfs_filestream_init();
-
-	/*
-	 * The size of the zone allocated buf log item is the maximum
-	 * size possible under XFS.  This wastes a little bit of memory,
-	 * but it is much faster.
-	 */
-	xfs_buf_item_zone =
-		kmem_zone_init((sizeof(xfs_buf_log_item_t) +
-				(((XFS_MAX_BLOCKSIZE / XFS_BLI_CHUNK) /
-				  NBWORD) * sizeof(int))),
-			       "xfs_buf_item");
-	xfs_efd_zone =
-		kmem_zone_init((sizeof(xfs_efd_log_item_t) +
-			       ((XFS_EFD_MAX_FAST_EXTENTS - 1) *
-				 sizeof(xfs_extent_t))),
-				      "xfs_efd_item");
-	xfs_efi_zone =
-		kmem_zone_init((sizeof(xfs_efi_log_item_t) +
-			       ((XFS_EFI_MAX_FAST_EXTENTS - 1) *
-				 sizeof(xfs_extent_t))),
-				      "xfs_efi_item");
-
-	/*
-	 * These zones warrant special memory allocator hints
-	 */
-	xfs_inode_zone =
-		kmem_zone_init_flags(sizeof(xfs_inode_t), "xfs_inode",
-					KM_ZONE_HWALIGN | KM_ZONE_RECLAIM |
-					KM_ZONE_SPREAD, NULL);
-	xfs_ili_zone =
-		kmem_zone_init_flags(sizeof(xfs_inode_log_item_t), "xfs_ili",
-					KM_ZONE_SPREAD, NULL);
-
-	/*
-	 * Allocate global trace buffers.
-	 */
-#ifdef XFS_ALLOC_TRACE
-	xfs_alloc_trace_buf = ktrace_alloc(XFS_ALLOC_TRACE_SIZE, KM_SLEEP);
-#endif
-#ifdef XFS_BMAP_TRACE
-	xfs_bmap_trace_buf = ktrace_alloc(XFS_BMAP_TRACE_SIZE, KM_SLEEP);
-#endif
-#ifdef XFS_BMBT_TRACE
-	xfs_bmbt_trace_buf = ktrace_alloc(XFS_BMBT_TRACE_SIZE, KM_SLEEP);
-#endif
-#ifdef XFS_ATTR_TRACE
-	xfs_attr_trace_buf = ktrace_alloc(XFS_ATTR_TRACE_SIZE, KM_SLEEP);
-#endif
-#ifdef XFS_DIR2_TRACE
-	xfs_dir2_trace_buf = ktrace_alloc(XFS_DIR2_GTRACE_SIZE, KM_SLEEP);
-#endif
-
-	xfs_dir_startup();
-
-#if (defined(DEBUG) || defined(INDUCE_IO_ERROR))
-	xfs_error_test_init();
-#endif /* DEBUG || INDUCE_IO_ERROR */
-
-	xfs_init_procfs();
-	xfs_sysctl_register();
-	return 0;
-}
-
-void __exit
-xfs_cleanup(void)
-{
-	extern kmem_zone_t	*xfs_inode_zone;
-	extern kmem_zone_t	*xfs_efd_zone;
-	extern kmem_zone_t	*xfs_efi_zone;
-
-	xfs_cleanup_procfs();
-	xfs_sysctl_unregister();
-	xfs_filestream_uninit();
-	xfs_mru_cache_uninit();
-	xfs_acl_zone_destroy(xfs_acl_zone);
-
-#ifdef XFS_DIR2_TRACE
-	ktrace_free(xfs_dir2_trace_buf);
-#endif
-#ifdef XFS_ATTR_TRACE
-	ktrace_free(xfs_attr_trace_buf);
-#endif
-#ifdef XFS_BMBT_TRACE
-	ktrace_free(xfs_bmbt_trace_buf);
-#endif
-#ifdef XFS_BMAP_TRACE
-	ktrace_free(xfs_bmap_trace_buf);
-#endif
-#ifdef XFS_ALLOC_TRACE
-	ktrace_free(xfs_alloc_trace_buf);
-#endif
-
-	kmem_zone_destroy(xfs_bmap_free_item_zone);
-	kmem_zone_destroy(xfs_btree_cur_zone);
-	kmem_zone_destroy(xfs_inode_zone);
-	kmem_zone_destroy(xfs_trans_zone);
-	kmem_zone_destroy(xfs_da_state_zone);
-	kmem_zone_destroy(xfs_dabuf_zone);
-	kmem_zone_destroy(xfs_buf_item_zone);
-	kmem_zone_destroy(xfs_efd_zone);
-	kmem_zone_destroy(xfs_efi_zone);
-	kmem_zone_destroy(xfs_ifork_zone);
-	kmem_zone_destroy(xfs_ili_zone);
-	kmem_zone_destroy(xfs_log_ticket_zone);
-}
-
-/*
- * xfs_start_flags
- *
- * This function fills in xfs_mount_t fields based on mount args.
- * Note: the superblock has _not_ yet been read in.
- */
-STATIC int
-xfs_start_flags(
-	struct xfs_mount_args	*ap,
-	struct xfs_mount	*mp)
-{
-	/* Values are in BBs */
-	if ((ap->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) {
-		/*
-		 * At this point the superblock has not been read
-		 * in, therefore we do not know the block size.
-		 * Before the mount call ends we will convert
-		 * these to FSBs.
-		 */
-		mp->m_dalign = ap->sunit;
-		mp->m_swidth = ap->swidth;
-	}
-
-	if (ap->logbufs != -1 &&
-	    ap->logbufs != 0 &&
-	    (ap->logbufs < XLOG_MIN_ICLOGS ||
-	     ap->logbufs > XLOG_MAX_ICLOGS)) {
-		cmn_err(CE_WARN,
-			"XFS: invalid logbufs value: %d [not %d-%d]",
-			ap->logbufs, XLOG_MIN_ICLOGS, XLOG_MAX_ICLOGS);
-		return XFS_ERROR(EINVAL);
-	}
-	mp->m_logbufs = ap->logbufs;
-	if (ap->logbufsize != -1 &&
-	    ap->logbufsize !=  0 &&
-	    (ap->logbufsize < XLOG_MIN_RECORD_BSIZE ||
-	     ap->logbufsize > XLOG_MAX_RECORD_BSIZE ||
-	     !is_power_of_2(ap->logbufsize))) {
-		cmn_err(CE_WARN,
-	"XFS: invalid logbufsize: %d [not 16k,32k,64k,128k or 256k]",
-			ap->logbufsize);
-		return XFS_ERROR(EINVAL);
-	}
-	mp->m_logbsize = ap->logbufsize;
-	mp->m_fsname_len = strlen(ap->fsname) + 1;
-	mp->m_fsname = kmem_alloc(mp->m_fsname_len, KM_SLEEP);
-	strcpy(mp->m_fsname, ap->fsname);
-	if (ap->rtname[0]) {
-		mp->m_rtname = kmem_alloc(strlen(ap->rtname) + 1, KM_SLEEP);
-		strcpy(mp->m_rtname, ap->rtname);
-	}
-	if (ap->logname[0]) {
-		mp->m_logname = kmem_alloc(strlen(ap->logname) + 1, KM_SLEEP);
-		strcpy(mp->m_logname, ap->logname);
-	}
-
-	if (ap->flags & XFSMNT_WSYNC)
-		mp->m_flags |= XFS_MOUNT_WSYNC;
-#if XFS_BIG_INUMS
-	if (ap->flags & XFSMNT_INO64) {
-		mp->m_flags |= XFS_MOUNT_INO64;
-		mp->m_inoadd = XFS_INO64_OFFSET;
-	}
-#endif
-	if (ap->flags & XFSMNT_RETERR)
-		mp->m_flags |= XFS_MOUNT_RETERR;
-	if (ap->flags & XFSMNT_NOALIGN)
-		mp->m_flags |= XFS_MOUNT_NOALIGN;
-	if (ap->flags & XFSMNT_SWALLOC)
-		mp->m_flags |= XFS_MOUNT_SWALLOC;
-	if (ap->flags & XFSMNT_OSYNCISOSYNC)
-		mp->m_flags |= XFS_MOUNT_OSYNCISOSYNC;
-	if (ap->flags & XFSMNT_32BITINODES)
-		mp->m_flags |= XFS_MOUNT_32BITINODES;
-
-	if (ap->flags & XFSMNT_IOSIZE) {
-		if (ap->iosizelog > XFS_MAX_IO_LOG ||
-		    ap->iosizelog < XFS_MIN_IO_LOG) {
-			cmn_err(CE_WARN,
-		"XFS: invalid log iosize: %d [not %d-%d]",
-				ap->iosizelog, XFS_MIN_IO_LOG,
-				XFS_MAX_IO_LOG);
-			return XFS_ERROR(EINVAL);
-		}
-
-		mp->m_flags |= XFS_MOUNT_DFLT_IOSIZE;
-		mp->m_readio_log = mp->m_writeio_log = ap->iosizelog;
-	}
-
-	if (ap->flags & XFSMNT_IKEEP)
-		mp->m_flags |= XFS_MOUNT_IKEEP;
-	if (ap->flags & XFSMNT_DIRSYNC)
-		mp->m_flags |= XFS_MOUNT_DIRSYNC;
-	if (ap->flags & XFSMNT_ATTR2)
-		mp->m_flags |= XFS_MOUNT_ATTR2;
-
-	if (ap->flags2 & XFSMNT2_COMPAT_IOSIZE)
-		mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE;
-
-	/*
-	 * no recovery flag requires a read-only mount
-	 */
-	if (ap->flags & XFSMNT_NORECOVERY) {
-		if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
-			cmn_err(CE_WARN,
-	"XFS: tried to mount a FS read-write without recovery!");
-			return XFS_ERROR(EINVAL);
-		}
-		mp->m_flags |= XFS_MOUNT_NORECOVERY;
-	}
-
-	if (ap->flags & XFSMNT_NOUUID)
-		mp->m_flags |= XFS_MOUNT_NOUUID;
-	if (ap->flags & XFSMNT_BARRIER)
-		mp->m_flags |= XFS_MOUNT_BARRIER;
-	else
-		mp->m_flags &= ~XFS_MOUNT_BARRIER;
-
-	if (ap->flags2 & XFSMNT2_FILESTREAMS)
-		mp->m_flags |= XFS_MOUNT_FILESTREAMS;
-
-	if (ap->flags & XFSMNT_DMAPI)
-		mp->m_flags |= XFS_MOUNT_DMAPI;
-	return 0;
-}
-
-/*
- * This function fills in xfs_mount_t fields based on mount args.
- * Note: the superblock _has_ now been read in.
- */
-STATIC int
-xfs_finish_flags(
-	struct xfs_mount_args	*ap,
-	struct xfs_mount	*mp)
-{
-	int			ronly = (mp->m_flags & XFS_MOUNT_RDONLY);
-
-	/* Fail a mount where the logbuf is smaller then the log stripe */
-	if (xfs_sb_version_haslogv2(&mp->m_sb)) {
-		if ((ap->logbufsize <= 0) &&
-		    (mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) {
-			mp->m_logbsize = mp->m_sb.sb_logsunit;
-		} else if (ap->logbufsize > 0 &&
-			   ap->logbufsize < mp->m_sb.sb_logsunit) {
-			cmn_err(CE_WARN,
-	"XFS: logbuf size must be greater than or equal to log stripe size");
-			return XFS_ERROR(EINVAL);
-		}
-	} else {
-		/* Fail a mount if the logbuf is larger than 32K */
-		if (ap->logbufsize > XLOG_BIG_RECORD_BSIZE) {
-			cmn_err(CE_WARN,
-	"XFS: logbuf size for version 1 logs must be 16K or 32K");
-			return XFS_ERROR(EINVAL);
-		}
-	}
-
-	if (xfs_sb_version_hasattr2(&mp->m_sb))
-		mp->m_flags |= XFS_MOUNT_ATTR2;
-
-	/*
-	 * prohibit r/w mounts of read-only filesystems
-	 */
-	if ((mp->m_sb.sb_flags & XFS_SBF_READONLY) && !ronly) {
-		cmn_err(CE_WARN,
-	"XFS: cannot mount a read-only filesystem as read-write");
-		return XFS_ERROR(EROFS);
-	}
-
-	/*
-	 * check for shared mount.
-	 */
-	if (ap->flags & XFSMNT_SHARED) {
-		if (!xfs_sb_version_hasshared(&mp->m_sb))
-			return XFS_ERROR(EINVAL);
-
-		/*
-		 * For IRIX 6.5, shared mounts must have the shared
-		 * version bit set, have the persistent readonly
-		 * field set, must be version 0 and can only be mounted
-		 * read-only.
-		 */
-		if (!ronly || !(mp->m_sb.sb_flags & XFS_SBF_READONLY) ||
-		     (mp->m_sb.sb_shared_vn != 0))
-			return XFS_ERROR(EINVAL);
-
-		mp->m_flags |= XFS_MOUNT_SHARED;
-
-		/*
-		 * Shared XFS V0 can't deal with DMI.  Return EINVAL.
-		 */
-		if (mp->m_sb.sb_shared_vn == 0 && (ap->flags & XFSMNT_DMAPI))
-			return XFS_ERROR(EINVAL);
-	}
-
-	if (ap->flags & XFSMNT_UQUOTA) {
-		mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE);
-		if (ap->flags & XFSMNT_UQUOTAENF)
-			mp->m_qflags |= XFS_UQUOTA_ENFD;
-	}
-
-	if (ap->flags & XFSMNT_GQUOTA) {
-		mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE);
-		if (ap->flags & XFSMNT_GQUOTAENF)
-			mp->m_qflags |= XFS_OQUOTA_ENFD;
-	} else if (ap->flags & XFSMNT_PQUOTA) {
-		mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE);
-		if (ap->flags & XFSMNT_PQUOTAENF)
-			mp->m_qflags |= XFS_OQUOTA_ENFD;
-	}
-
-	return 0;
-}
-
-/*
- * xfs_mount
- *
- * The file system configurations are:
- *	(1) device (partition) with data and internal log
- *	(2) logical volume with data and log subvolumes.
- *	(3) logical volume with data, log, and realtime subvolumes.
- *
- * We only have to handle opening the log and realtime volumes here if
- * they are present.  The data subvolume has already been opened by
- * get_sb_bdev() and is stored in vfsp->vfs_super->s_bdev.
- */
-int
-xfs_mount(
-	struct xfs_mount	*mp,
-	struct xfs_mount_args	*args,
-	cred_t			*credp)
-{
-	struct block_device	*ddev, *logdev, *rtdev;
-	int			flags = 0, error;
-
-	ddev = mp->m_super->s_bdev;
-	logdev = rtdev = NULL;
-
-	error = xfs_dmops_get(mp, args);
-	if (error)
-		return error;
-	error = xfs_qmops_get(mp, args);
-	if (error)
-		return error;
-
-	if (args->flags & XFSMNT_QUIET)
-		flags |= XFS_MFSI_QUIET;
-
-	/*
-	 * Open real time and log devices - order is important.
-	 */
-	if (args->logname[0]) {
-		error = xfs_blkdev_get(mp, args->logname, &logdev);
-		if (error)
-			return error;
-	}
-	if (args->rtname[0]) {
-		error = xfs_blkdev_get(mp, args->rtname, &rtdev);
-		if (error) {
-			xfs_blkdev_put(logdev);
-			return error;
-		}
-
-		if (rtdev == ddev || rtdev == logdev) {
-			cmn_err(CE_WARN,
-	"XFS: Cannot mount filesystem with identical rtdev and ddev/logdev.");
-			xfs_blkdev_put(logdev);
-			xfs_blkdev_put(rtdev);
-			return EINVAL;
-		}
-	}
-
-	/*
-	 * Setup xfs_mount buffer target pointers
-	 */
-	error = ENOMEM;
-	mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0);
-	if (!mp->m_ddev_targp) {
-		xfs_blkdev_put(logdev);
-		xfs_blkdev_put(rtdev);
-		return error;
-	}
-	if (rtdev) {
-		mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1);
-		if (!mp->m_rtdev_targp) {
-			xfs_blkdev_put(logdev);
-			xfs_blkdev_put(rtdev);
-			goto error0;
-		}
-	}
-	mp->m_logdev_targp = (logdev && logdev != ddev) ?
-				xfs_alloc_buftarg(logdev, 1) : mp->m_ddev_targp;
-	if (!mp->m_logdev_targp) {
-		xfs_blkdev_put(logdev);
-		xfs_blkdev_put(rtdev);
-		goto error0;
-	}
-
-	/*
-	 * Setup flags based on mount(2) options and then the superblock
-	 */
-	error = xfs_start_flags(args, mp);
-	if (error)
-		goto error1;
-	error = xfs_readsb(mp, flags);
-	if (error)
-		goto error1;
-	error = xfs_finish_flags(args, mp);
-	if (error)
-		goto error2;
-
-	/*
-	 * Setup xfs_mount buffer target pointers based on superblock
-	 */
-	error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize,
-				    mp->m_sb.sb_sectsize);
-	if (!error && logdev && logdev != ddev) {
-		unsigned int	log_sector_size = BBSIZE;
-
-		if (xfs_sb_version_hassector(&mp->m_sb))
-			log_sector_size = mp->m_sb.sb_logsectsize;
-		error = xfs_setsize_buftarg(mp->m_logdev_targp,
-					    mp->m_sb.sb_blocksize,
-					    log_sector_size);
-	}
-	if (!error && rtdev)
-		error = xfs_setsize_buftarg(mp->m_rtdev_targp,
-					    mp->m_sb.sb_blocksize,
-					    mp->m_sb.sb_sectsize);
-	if (error)
-		goto error2;
-
-	if (mp->m_flags & XFS_MOUNT_BARRIER)
-		xfs_mountfs_check_barriers(mp);
-
-	if ((error = xfs_filestream_mount(mp)))
-		goto error2;
-
-	error = xfs_mountfs(mp, flags);
-	if (error)
-		goto error2;
-
-	XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname);
-
-	return 0;
-
-error2:
-	if (mp->m_sb_bp)
-		xfs_freesb(mp);
-error1:
-	xfs_binval(mp->m_ddev_targp);
-	if (logdev && logdev != ddev)
-		xfs_binval(mp->m_logdev_targp);
-	if (rtdev)
-		xfs_binval(mp->m_rtdev_targp);
-error0:
-	xfs_unmountfs_close(mp, credp);
-	xfs_qmops_put(mp);
-	xfs_dmops_put(mp);
-	return error;
-}
-
-int
-xfs_unmount(
-	xfs_mount_t	*mp,
-	int		flags,
-	cred_t		*credp)
-{
-	xfs_inode_t	*rip;
-	bhv_vnode_t	*rvp;
-	int		unmount_event_wanted = 0;
-	int		unmount_event_flags = 0;
-	int		xfs_unmountfs_needed = 0;
-	int		error;
-
-	rip = mp->m_rootip;
-	rvp = XFS_ITOV(rip);
-
-#ifdef HAVE_DMAPI
-	if (mp->m_flags & XFS_MOUNT_DMAPI) {
-		error = XFS_SEND_PREUNMOUNT(mp,
-				rip, DM_RIGHT_NULL, rip, DM_RIGHT_NULL,
-				NULL, NULL, 0, 0,
-				(mp->m_dmevmask & (1<<DM_EVENT_PREUNMOUNT))?
-					0:DM_FLAGS_UNWANTED);
-			if (error)
-				return XFS_ERROR(error);
-		unmount_event_wanted = 1;
-		unmount_event_flags = (mp->m_dmevmask & (1<<DM_EVENT_UNMOUNT))?
-					0 : DM_FLAGS_UNWANTED;
-	}
-#endif
-
-	/*
-	 * Blow away any referenced inode in the filestreams cache.
-	 * This can and will cause log traffic as inodes go inactive
-	 * here.
-	 */
-	xfs_filestream_unmount(mp);
-
-	XFS_bflush(mp->m_ddev_targp);
-	error = xfs_unmount_flush(mp, 0);
-	if (error)
-		goto out;
-
-	ASSERT(vn_count(rvp) == 1);
-
-	/*
-	 * Drop the reference count
-	 */
-	IRELE(rip);
-
-	/*
-	 * If we're forcing a shutdown, typically because of a media error,
-	 * we want to make sure we invalidate dirty pages that belong to
-	 * referenced vnodes as well.
-	 */
-	if (XFS_FORCED_SHUTDOWN(mp)) {
-		error = xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE);
-		ASSERT(error != EFSCORRUPTED);
-	}
-	xfs_unmountfs_needed = 1;
-
-out:
-	/*	Send DMAPI event, if required.
-	 *	Then do xfs_unmountfs() if needed.
-	 *	Then return error (or zero).
-	 */
-	if (unmount_event_wanted) {
-		/* Note: mp structure must still exist for
-		 * XFS_SEND_UNMOUNT() call.
-		 */
-		XFS_SEND_UNMOUNT(mp, error == 0 ? rip : NULL,
-			DM_RIGHT_NULL, 0, error, unmount_event_flags);
-	}
-	if (xfs_unmountfs_needed) {
-		/*
-		 * Call common unmount function to flush to disk
-		 * and free the super block buffer & mount structures.
-		 */
-		xfs_unmountfs(mp, credp);
-		xfs_qmops_put(mp);
-		xfs_dmops_put(mp);
-		kmem_free(mp, sizeof(xfs_mount_t));
-	}
-
-	return XFS_ERROR(error);
-}
-
 STATIC void
 xfs_quiesce_fs(
 	xfs_mount_t		*mp)
@@ -694,30 +114,6 @@ xfs_attr_quiesce(
 	xfs_unmountfs_writesb(mp);
 }
 
-int
-xfs_mntupdate(
-	struct xfs_mount		*mp,
-	int				*flags,
-	struct xfs_mount_args		*args)
-{
-	if (!(*flags & MS_RDONLY)) {			/* rw/ro -> rw */
-		if (mp->m_flags & XFS_MOUNT_RDONLY)
-			mp->m_flags &= ~XFS_MOUNT_RDONLY;
-		if (args->flags & XFSMNT_BARRIER) {
-			mp->m_flags |= XFS_MOUNT_BARRIER;
-			xfs_mountfs_check_barriers(mp);
-		} else {
-			mp->m_flags &= ~XFS_MOUNT_BARRIER;
-		}
-	} else if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {	/* rw -> ro */
-		xfs_filestream_flush(mp);
-		xfs_sync(mp, SYNC_DATA_QUIESCE);
-		xfs_attr_quiesce(mp);
-		mp->m_flags |= XFS_MOUNT_RDONLY;
-	}
-	return 0;
-}
-
 /*
  * xfs_unmount_flush implements a set of flush operation on special
  * inodes, which are needed as a separate set of operations so that
@@ -732,7 +128,6 @@ xfs_unmount_flush(
 	xfs_inode_t	*rip = mp->m_rootip;
 	xfs_inode_t	*rbmip;
 	xfs_inode_t	*rsumip = NULL;
-	bhv_vnode_t	*rvp = XFS_ITOV(rip);
 	int		error;
 
 	xfs_ilock(rip, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT);
@@ -750,7 +145,7 @@ xfs_unmount_flush(
 		if (error == EFSCORRUPTED)
 			goto fscorrupt_out;
 
-		ASSERT(vn_count(XFS_ITOV(rbmip)) == 1);
+		ASSERT(vn_count(VFS_I(rbmip)) == 1);
 
 		rsumip = mp->m_rsumip;
 		xfs_ilock(rsumip, XFS_ILOCK_EXCL);
@@ -761,7 +156,7 @@ xfs_unmount_flush(
 		if (error == EFSCORRUPTED)
 			goto fscorrupt_out;
 
-		ASSERT(vn_count(XFS_ITOV(rsumip)) == 1);
+		ASSERT(vn_count(VFS_I(rsumip)) == 1);
 	}
 
 	/*
@@ -771,7 +166,7 @@ xfs_unmount_flush(
 	if (error == EFSCORRUPTED)
 		goto fscorrupt_out2;
 
-	if (vn_count(rvp) != 1 && !relocation) {
+	if (vn_count(VFS_I(rip)) != 1 && !relocation) {
 		xfs_iunlock(rip, XFS_ILOCK_EXCL);
 		return XFS_ERROR(EBUSY);
 	}
@@ -888,7 +283,7 @@ xfs_sync_inodes(
 	int             *bypassed)
 {
 	xfs_inode_t	*ip = NULL;
-	bhv_vnode_t	*vp = NULL;
+	struct inode	*vp = NULL;
 	int		error;
 	int		last_error;
 	uint64_t	fflag;
@@ -1008,7 +403,7 @@ xfs_sync_inodes(
 			continue;
 		}
 
-		vp = XFS_ITOV_NULL(ip);
+		vp = VFS_I(ip);
 
 		/*
 		 * If the vnode is gone then this is being torn down,
@@ -1048,7 +443,7 @@ xfs_sync_inodes(
 
 		if (XFS_FORCED_SHUTDOWN(mp) && !(flags & SYNC_CLOSE)) {
 			XFS_MOUNT_IUNLOCK(mp);
-			kmem_free(ipointer, sizeof(xfs_iptr_t));
+			kmem_free(ipointer);
 			return 0;
 		}
 
@@ -1083,7 +478,7 @@ xfs_sync_inodes(
 			IPOINTER_INSERT(ip, mp);
 			xfs_ilock(ip, lock_flags);
 
-			ASSERT(vp == XFS_ITOV(ip));
+			ASSERT(vp == VFS_I(ip));
 			ASSERT(ip->i_mount == mp);
 
 			vnode_refed = B_TRUE;
@@ -1194,7 +589,7 @@ xfs_sync_inodes(
 			}
 			XFS_MOUNT_IUNLOCK(mp);
 			ASSERT(ipointer_in == B_FALSE);
-			kmem_free(ipointer, sizeof(xfs_iptr_t));
+			kmem_free(ipointer);
 			return XFS_ERROR(error);
 		}
 
@@ -1224,7 +619,7 @@ xfs_sync_inodes(
 
 	ASSERT(ipointer_in == B_FALSE);
 
-	kmem_free(ipointer, sizeof(xfs_iptr_t));
+	kmem_free(ipointer);
 	return XFS_ERROR(last_error);
 }
 
diff --git a/fs/xfs/xfs_vfsops.h b/fs/xfs/xfs_vfsops.h
index 1688817c55e..a74b05087da 100644
--- a/fs/xfs/xfs_vfsops.h
+++ b/fs/xfs/xfs_vfsops.h
@@ -8,11 +8,6 @@ struct kstatfs;
 struct xfs_mount;
 struct xfs_mount_args;
 
-int xfs_mount(struct xfs_mount *mp, struct xfs_mount_args *args,
-		struct cred *credp);
-int xfs_unmount(struct xfs_mount *mp, int flags, struct cred *credp);
-int xfs_mntupdate(struct xfs_mount *mp, int *flags,
-		struct xfs_mount_args *args);
 int xfs_sync(struct xfs_mount *mp, int flags);
 void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname,
 		int lnnum);
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index e475e3717eb..8b6812f66a1 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -75,26 +75,23 @@ xfs_open(
 	return 0;
 }
 
-/*
- * xfs_setattr
- */
 int
 xfs_setattr(
-	xfs_inode_t		*ip,
-	bhv_vattr_t		*vap,
+	struct xfs_inode	*ip,
+	struct iattr		*iattr,
 	int			flags,
 	cred_t			*credp)
 {
 	xfs_mount_t		*mp = ip->i_mount;
+	struct inode		*inode = VFS_I(ip);
+	int			mask = iattr->ia_valid;
 	xfs_trans_t		*tp;
-	int			mask;
 	int			code;
 	uint			lock_flags;
 	uint			commit_flags=0;
 	uid_t			uid=0, iuid=0;
 	gid_t			gid=0, igid=0;
 	int			timeflags = 0;
-	xfs_prid_t		projid=0, iprojid=0;
 	struct xfs_dquot	*udqp, *gdqp, *olddquot1, *olddquot2;
 	int			file_owner;
 	int			need_iolock = 1;
@@ -104,30 +101,9 @@ xfs_setattr(
 	if (mp->m_flags & XFS_MOUNT_RDONLY)
 		return XFS_ERROR(EROFS);
 
-	/*
-	 * Cannot set certain attributes.
-	 */
-	mask = vap->va_mask;
-	if (mask & XFS_AT_NOSET) {
-		return XFS_ERROR(EINVAL);
-	}
-
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
-	/*
-	 * Timestamps do not need to be logged and hence do not
-	 * need to be done within a transaction.
-	 */
-	if (mask & XFS_AT_UPDTIMES) {
-		ASSERT((mask & ~XFS_AT_UPDTIMES) == 0);
-		timeflags = ((mask & XFS_AT_UPDATIME) ? XFS_ICHGTIME_ACC : 0) |
-			    ((mask & XFS_AT_UPDCTIME) ? XFS_ICHGTIME_CHG : 0) |
-			    ((mask & XFS_AT_UPDMTIME) ? XFS_ICHGTIME_MOD : 0);
-		xfs_ichgtime(ip, timeflags);
-		return 0;
-	}
-
 	olddquot1 = olddquot2 = NULL;
 	udqp = gdqp = NULL;
 
@@ -139,28 +115,22 @@ xfs_setattr(
 	 * If the IDs do change before we take the ilock, we're covered
 	 * because the i_*dquot fields will get updated anyway.
 	 */
-	if (XFS_IS_QUOTA_ON(mp) &&
-	    (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID))) {
+	if (XFS_IS_QUOTA_ON(mp) && (mask & (ATTR_UID|ATTR_GID))) {
 		uint	qflags = 0;
 
-		if ((mask & XFS_AT_UID) && XFS_IS_UQUOTA_ON(mp)) {
-			uid = vap->va_uid;
+		if ((mask & ATTR_UID) && XFS_IS_UQUOTA_ON(mp)) {
+			uid = iattr->ia_uid;
 			qflags |= XFS_QMOPT_UQUOTA;
 		} else {
 			uid = ip->i_d.di_uid;
 		}
-		if ((mask & XFS_AT_GID) && XFS_IS_GQUOTA_ON(mp)) {
-			gid = vap->va_gid;
+		if ((mask & ATTR_GID) && XFS_IS_GQUOTA_ON(mp)) {
+			gid = iattr->ia_gid;
 			qflags |= XFS_QMOPT_GQUOTA;
 		}  else {
 			gid = ip->i_d.di_gid;
 		}
-		if ((mask & XFS_AT_PROJID) && XFS_IS_PQUOTA_ON(mp)) {
-			projid = vap->va_projid;
-			qflags |= XFS_QMOPT_PQUOTA;
-		}  else {
-			projid = ip->i_d.di_projid;
-		}
+
 		/*
 		 * We take a reference when we initialize udqp and gdqp,
 		 * so it is important that we never blindly double trip on
@@ -168,8 +138,8 @@ xfs_setattr(
 		 */
 		ASSERT(udqp == NULL);
 		ASSERT(gdqp == NULL);
-		code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, projid, qflags,
-					 &udqp, &gdqp);
+		code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, ip->i_d.di_projid,
+					 qflags, &udqp, &gdqp);
 		if (code)
 			return code;
 	}
@@ -180,10 +150,10 @@ xfs_setattr(
 	 */
 	tp = NULL;
 	lock_flags = XFS_ILOCK_EXCL;
-	if (flags & ATTR_NOLOCK)
+	if (flags & XFS_ATTR_NOLOCK)
 		need_iolock = 0;
-	if (!(mask & XFS_AT_SIZE)) {
-		if ((mask != (XFS_AT_CTIME|XFS_AT_ATIME|XFS_AT_MTIME)) ||
+	if (!(mask & ATTR_SIZE)) {
+		if ((mask != (ATTR_CTIME|ATTR_ATIME|ATTR_MTIME)) ||
 		    (mp->m_flags & XFS_MOUNT_WSYNC)) {
 			tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE);
 			commit_flags = 0;
@@ -196,10 +166,10 @@ xfs_setattr(
 		}
 	} else {
 		if (DM_EVENT_ENABLED(ip, DM_EVENT_TRUNCATE) &&
-		    !(flags & ATTR_DMI)) {
+		    !(flags & XFS_ATTR_DMI)) {
 			int dmflags = AT_DELAY_FLAG(flags) | DM_SEM_FLAG_WR;
 			code = XFS_SEND_DATA(mp, DM_EVENT_TRUNCATE, ip,
-				vap->va_size, 0, dmflags, NULL);
+				iattr->ia_size, 0, dmflags, NULL);
 			if (code) {
 				lock_flags = 0;
 				goto error_return;
@@ -212,16 +182,14 @@ xfs_setattr(
 	xfs_ilock(ip, lock_flags);
 
 	/* boolean: are we the file owner? */
-	file_owner = (current_fsuid(credp) == ip->i_d.di_uid);
+	file_owner = (current_fsuid() == ip->i_d.di_uid);
 
 	/*
 	 * Change various properties of a file.
 	 * Only the owner or users with CAP_FOWNER
 	 * capability may do these things.
 	 */
-	if (mask &
-	    (XFS_AT_MODE|XFS_AT_XFLAGS|XFS_AT_EXTSIZE|XFS_AT_UID|
-	     XFS_AT_GID|XFS_AT_PROJID)) {
+	if (mask & (ATTR_MODE|ATTR_UID|ATTR_GID)) {
 		/*
 		 * CAP_FOWNER overrides the following restrictions:
 		 *
@@ -245,21 +213,21 @@ xfs_setattr(
 		 * IDs of the calling process shall match the group owner of
 		 * the file when setting the set-group-ID bit on that file
 		 */
-		if (mask & XFS_AT_MODE) {
+		if (mask & ATTR_MODE) {
 			mode_t m = 0;
 
-			if ((vap->va_mode & S_ISUID) && !file_owner)
+			if ((iattr->ia_mode & S_ISUID) && !file_owner)
 				m |= S_ISUID;
-			if ((vap->va_mode & S_ISGID) &&
+			if ((iattr->ia_mode & S_ISGID) &&
 			    !in_group_p((gid_t)ip->i_d.di_gid))
 				m |= S_ISGID;
 #if 0
 			/* Linux allows this, Irix doesn't. */
-			if ((vap->va_mode & S_ISVTX) && !S_ISDIR(ip->i_d.di_mode))
+			if ((iattr->ia_mode & S_ISVTX) && !S_ISDIR(ip->i_d.di_mode))
 				m |= S_ISVTX;
 #endif
 			if (m && !capable(CAP_FSETID))
-				vap->va_mode &= ~m;
+				iattr->ia_mode &= ~m;
 		}
 	}
 
@@ -270,7 +238,7 @@ xfs_setattr(
 	 * and can change the group id only to a group of which he
 	 * or she is a member.
 	 */
-	if (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID)) {
+	if (mask & (ATTR_UID|ATTR_GID)) {
 		/*
 		 * These IDs could have changed since we last looked at them.
 		 * But, we're assured that if the ownership did change
@@ -278,12 +246,9 @@ xfs_setattr(
 		 * would have changed also.
 		 */
 		iuid = ip->i_d.di_uid;
-		iprojid = ip->i_d.di_projid;
 		igid = ip->i_d.di_gid;
-		gid = (mask & XFS_AT_GID) ? vap->va_gid : igid;
-		uid = (mask & XFS_AT_UID) ? vap->va_uid : iuid;
-		projid = (mask & XFS_AT_PROJID) ? (xfs_prid_t)vap->va_projid :
-			 iprojid;
+		gid = (mask & ATTR_GID) ? iattr->ia_gid : igid;
+		uid = (mask & ATTR_UID) ? iattr->ia_uid : iuid;
 
 		/*
 		 * CAP_CHOWN overrides the following restrictions:
@@ -303,11 +268,10 @@ xfs_setattr(
 			goto error_return;
 		}
 		/*
-		 * Do a quota reservation only if uid/projid/gid is actually
+		 * Do a quota reservation only if uid/gid is actually
 		 * going to change.
 		 */
 		if ((XFS_IS_UQUOTA_ON(mp) && iuid != uid) ||
-		    (XFS_IS_PQUOTA_ON(mp) && iprojid != projid) ||
 		    (XFS_IS_GQUOTA_ON(mp) && igid != gid)) {
 			ASSERT(tp);
 			code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp,
@@ -321,13 +285,13 @@ xfs_setattr(
 	/*
 	 * Truncate file.  Must have write permission and not be a directory.
 	 */
-	if (mask & XFS_AT_SIZE) {
+	if (mask & ATTR_SIZE) {
 		/* Short circuit the truncate case for zero length files */
-		if ((vap->va_size == 0) &&
-		   (ip->i_size == 0) && (ip->i_d.di_nextents == 0)) {
+		if (iattr->ia_size == 0 &&
+		    ip->i_size == 0 && ip->i_d.di_nextents == 0) {
 			xfs_iunlock(ip, XFS_ILOCK_EXCL);
 			lock_flags &= ~XFS_ILOCK_EXCL;
-			if (mask & XFS_AT_CTIME)
+			if (mask & ATTR_CTIME)
 				xfs_ichgtime(ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
 			code = 0;
 			goto error_return;
@@ -350,9 +314,9 @@ xfs_setattr(
 	/*
 	 * Change file access or modified times.
 	 */
-	if (mask & (XFS_AT_ATIME|XFS_AT_MTIME)) {
+	if (mask & (ATTR_ATIME|ATTR_MTIME)) {
 		if (!file_owner) {
-			if ((flags & ATTR_UTIME) &&
+			if ((mask & (ATTR_MTIME_SET|ATTR_ATIME_SET)) &&
 			    !capable(CAP_FOWNER)) {
 				code = XFS_ERROR(EPERM);
 				goto error_return;
@@ -361,90 +325,23 @@ xfs_setattr(
 	}
 
 	/*
-	 * Change extent size or realtime flag.
-	 */
-	if (mask & (XFS_AT_EXTSIZE|XFS_AT_XFLAGS)) {
-		/*
-		 * Can't change extent size if any extents are allocated.
-		 */
-		if (ip->i_d.di_nextents && (mask & XFS_AT_EXTSIZE) &&
-		    ((ip->i_d.di_extsize << mp->m_sb.sb_blocklog) !=
-		     vap->va_extsize) ) {
-			code = XFS_ERROR(EINVAL);	/* EFBIG? */
-			goto error_return;
-		}
-
-		/*
-		 * Can't change realtime flag if any extents are allocated.
-		 */
-		if ((ip->i_d.di_nextents || ip->i_delayed_blks) &&
-		    (mask & XFS_AT_XFLAGS) &&
-		    (XFS_IS_REALTIME_INODE(ip)) !=
-		    (vap->va_xflags & XFS_XFLAG_REALTIME)) {
-			code = XFS_ERROR(EINVAL);	/* EFBIG? */
-			goto error_return;
-		}
-		/*
-		 * Extent size must be a multiple of the appropriate block
-		 * size, if set at all.
-		 */
-		if ((mask & XFS_AT_EXTSIZE) && vap->va_extsize != 0) {
-			xfs_extlen_t	size;
-
-			if (XFS_IS_REALTIME_INODE(ip) ||
-			    ((mask & XFS_AT_XFLAGS) &&
-			    (vap->va_xflags & XFS_XFLAG_REALTIME))) {
-				size = mp->m_sb.sb_rextsize <<
-				       mp->m_sb.sb_blocklog;
-			} else {
-				size = mp->m_sb.sb_blocksize;
-			}
-			if (vap->va_extsize % size) {
-				code = XFS_ERROR(EINVAL);
-				goto error_return;
-			}
-		}
-		/*
-		 * If realtime flag is set then must have realtime data.
-		 */
-		if ((mask & XFS_AT_XFLAGS) &&
-		    (vap->va_xflags & XFS_XFLAG_REALTIME)) {
-			if ((mp->m_sb.sb_rblocks == 0) ||
-			    (mp->m_sb.sb_rextsize == 0) ||
-			    (ip->i_d.di_extsize % mp->m_sb.sb_rextsize)) {
-				code = XFS_ERROR(EINVAL);
-				goto error_return;
-			}
-		}
-
-		/*
-		 * Can't modify an immutable/append-only file unless
-		 * we have appropriate permission.
-		 */
-		if ((mask & XFS_AT_XFLAGS) &&
-		    (ip->i_d.di_flags &
-				(XFS_DIFLAG_IMMUTABLE|XFS_DIFLAG_APPEND) ||
-		     (vap->va_xflags &
-				(XFS_XFLAG_IMMUTABLE | XFS_XFLAG_APPEND))) &&
-		    !capable(CAP_LINUX_IMMUTABLE)) {
-			code = XFS_ERROR(EPERM);
-			goto error_return;
-		}
-	}
-
-	/*
 	 * Now we can make the changes.  Before we join the inode
-	 * to the transaction, if XFS_AT_SIZE is set then take care of
+	 * to the transaction, if ATTR_SIZE is set then take care of
 	 * the part of the truncation that must be done without the
 	 * inode lock.  This needs to be done before joining the inode
 	 * to the transaction, because the inode cannot be unlocked
 	 * once it is a part of the transaction.
 	 */
-	if (mask & XFS_AT_SIZE) {
+	if (mask & ATTR_SIZE) {
 		code = 0;
-		if ((vap->va_size > ip->i_size) &&
-		    (flags & ATTR_NOSIZETOK) == 0) {
-			code = xfs_igrow_start(ip, vap->va_size, credp);
+		if (iattr->ia_size > ip->i_size) {
+			/*
+			 * Do the first part of growing a file: zero any data
+			 * in the last block that is beyond the old EOF.  We
+			 * need to do this before the inode is joined to the
+			 * transaction to modify the i_size.
+			 */
+			code = xfs_zero_eof(ip, iattr->ia_size, ip->i_size);
 		}
 		xfs_iunlock(ip, XFS_ILOCK_EXCL);
 
@@ -461,10 +358,10 @@ xfs_setattr(
 		 * not within the range we care about here.
 		 */
 		if (!code &&
-		    (ip->i_size != ip->i_d.di_size) &&
-		    (vap->va_size > ip->i_d.di_size)) {
+		    ip->i_size != ip->i_d.di_size &&
+		    iattr->ia_size > ip->i_d.di_size) {
 			code = xfs_flush_pages(ip,
-					ip->i_d.di_size, vap->va_size,
+					ip->i_d.di_size, iattr->ia_size,
 					XFS_B_ASYNC, FI_NONE);
 		}
 
@@ -472,7 +369,7 @@ xfs_setattr(
 		vn_iowait(ip);
 
 		if (!code)
-			code = xfs_itruncate_data(ip, vap->va_size);
+			code = xfs_itruncate_data(ip, iattr->ia_size);
 		if (code) {
 			ASSERT(tp == NULL);
 			lock_flags &= ~XFS_ILOCK_EXCL;
@@ -501,28 +398,30 @@ xfs_setattr(
 	/*
 	 * Truncate file.  Must have write permission and not be a directory.
 	 */
-	if (mask & XFS_AT_SIZE) {
+	if (mask & ATTR_SIZE) {
 		/*
 		 * Only change the c/mtime if we are changing the size
 		 * or we are explicitly asked to change it. This handles
 		 * the semantic difference between truncate() and ftruncate()
 		 * as implemented in the VFS.
 		 */
-		if (vap->va_size != ip->i_size || (mask & XFS_AT_CTIME))
+		if (iattr->ia_size != ip->i_size || (mask & ATTR_CTIME))
 			timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG;
 
-		if (vap->va_size > ip->i_size) {
-			xfs_igrow_finish(tp, ip, vap->va_size,
-			    !(flags & ATTR_DMI));
-		} else if ((vap->va_size <= ip->i_size) ||
-			   ((vap->va_size == 0) && ip->i_d.di_nextents)) {
+		if (iattr->ia_size > ip->i_size) {
+			ip->i_d.di_size = iattr->ia_size;
+			ip->i_size = iattr->ia_size;
+			if (!(flags & XFS_ATTR_DMI))
+				xfs_ichgtime(ip, XFS_ICHGTIME_CHG);
+			xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
+		} else if (iattr->ia_size <= ip->i_size ||
+			   (iattr->ia_size == 0 && ip->i_d.di_nextents)) {
 			/*
 			 * signal a sync transaction unless
 			 * we're truncating an already unlinked
 			 * file on a wsync filesystem
 			 */
-			code = xfs_itruncate_finish(&tp, ip,
-					    (xfs_fsize_t)vap->va_size,
+			code = xfs_itruncate_finish(&tp, ip, iattr->ia_size,
 					    XFS_DATA_FORK,
 					    ((ip->i_d.di_nlink != 0 ||
 					      !(mp->m_flags & XFS_MOUNT_WSYNC))
@@ -544,9 +443,12 @@ xfs_setattr(
 	/*
 	 * Change file access modes.
 	 */
-	if (mask & XFS_AT_MODE) {
+	if (mask & ATTR_MODE) {
 		ip->i_d.di_mode &= S_IFMT;
-		ip->i_d.di_mode |= vap->va_mode & ~S_IFMT;
+		ip->i_d.di_mode |= iattr->ia_mode & ~S_IFMT;
+
+		inode->i_mode &= S_IFMT;
+		inode->i_mode |= iattr->ia_mode & ~S_IFMT;
 
 		xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE);
 		timeflags |= XFS_ICHGTIME_CHG;
@@ -559,7 +461,7 @@ xfs_setattr(
 	 * and can change the group id only to a group of which he
 	 * or she is a member.
 	 */
-	if (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID)) {
+	if (mask & (ATTR_UID|ATTR_GID)) {
 		/*
 		 * CAP_FSETID overrides the following restrictions:
 		 *
@@ -577,39 +479,24 @@ xfs_setattr(
 		 */
 		if (iuid != uid) {
 			if (XFS_IS_UQUOTA_ON(mp)) {
-				ASSERT(mask & XFS_AT_UID);
+				ASSERT(mask & ATTR_UID);
 				ASSERT(udqp);
 				olddquot1 = XFS_QM_DQVOPCHOWN(mp, tp, ip,
 							&ip->i_udquot, udqp);
 			}
 			ip->i_d.di_uid = uid;
+			inode->i_uid = uid;
 		}
 		if (igid != gid) {
 			if (XFS_IS_GQUOTA_ON(mp)) {
 				ASSERT(!XFS_IS_PQUOTA_ON(mp));
-				ASSERT(mask & XFS_AT_GID);
+				ASSERT(mask & ATTR_GID);
 				ASSERT(gdqp);
 				olddquot2 = XFS_QM_DQVOPCHOWN(mp, tp, ip,
 							&ip->i_gdquot, gdqp);
 			}
 			ip->i_d.di_gid = gid;
-		}
-		if (iprojid != projid) {
-			if (XFS_IS_PQUOTA_ON(mp)) {
-				ASSERT(!XFS_IS_GQUOTA_ON(mp));
-				ASSERT(mask & XFS_AT_PROJID);
-				ASSERT(gdqp);
-				olddquot2 = XFS_QM_DQVOPCHOWN(mp, tp, ip,
-							&ip->i_gdquot, gdqp);
-			}
-			ip->i_d.di_projid = projid;
-			/*
-			 * We may have to rev the inode as well as
-			 * the superblock version number since projids didn't
-			 * exist before DINODE_VERSION_2 and SB_VERSION_NLINK.
-			 */
-			if (ip->i_d.di_version == XFS_DINODE_VERSION_1)
-				xfs_bump_ino_vers2(tp, ip);
+			inode->i_gid = gid;
 		}
 
 		xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE);
@@ -620,82 +507,33 @@ xfs_setattr(
 	/*
 	 * Change file access or modified times.
 	 */
-	if (mask & (XFS_AT_ATIME|XFS_AT_MTIME)) {
-		if (mask & XFS_AT_ATIME) {
-			ip->i_d.di_atime.t_sec = vap->va_atime.tv_sec;
-			ip->i_d.di_atime.t_nsec = vap->va_atime.tv_nsec;
+	if (mask & (ATTR_ATIME|ATTR_MTIME)) {
+		if (mask & ATTR_ATIME) {
+			inode->i_atime = iattr->ia_atime;
+			ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec;
+			ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec;
 			ip->i_update_core = 1;
-			timeflags &= ~XFS_ICHGTIME_ACC;
 		}
-		if (mask & XFS_AT_MTIME) {
-			ip->i_d.di_mtime.t_sec = vap->va_mtime.tv_sec;
-			ip->i_d.di_mtime.t_nsec = vap->va_mtime.tv_nsec;
+		if (mask & ATTR_MTIME) {
+			inode->i_mtime = iattr->ia_mtime;
+			ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec;
+			ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec;
 			timeflags &= ~XFS_ICHGTIME_MOD;
 			timeflags |= XFS_ICHGTIME_CHG;
 		}
-		if (tp && (flags & ATTR_UTIME))
+		if (tp && (mask & (ATTR_MTIME_SET|ATTR_ATIME_SET)))
 			xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE);
 	}
 
 	/*
-	 * Change XFS-added attributes.
-	 */
-	if (mask & (XFS_AT_EXTSIZE|XFS_AT_XFLAGS)) {
-		if (mask & XFS_AT_EXTSIZE) {
-			/*
-			 * Converting bytes to fs blocks.
-			 */
-			ip->i_d.di_extsize = vap->va_extsize >>
-				mp->m_sb.sb_blocklog;
-		}
-		if (mask & XFS_AT_XFLAGS) {
-			uint	di_flags;
-
-			/* can't set PREALLOC this way, just preserve it */
-			di_flags = (ip->i_d.di_flags & XFS_DIFLAG_PREALLOC);
-			if (vap->va_xflags & XFS_XFLAG_IMMUTABLE)
-				di_flags |= XFS_DIFLAG_IMMUTABLE;
-			if (vap->va_xflags & XFS_XFLAG_APPEND)
-				di_flags |= XFS_DIFLAG_APPEND;
-			if (vap->va_xflags & XFS_XFLAG_SYNC)
-				di_flags |= XFS_DIFLAG_SYNC;
-			if (vap->va_xflags & XFS_XFLAG_NOATIME)
-				di_flags |= XFS_DIFLAG_NOATIME;
-			if (vap->va_xflags & XFS_XFLAG_NODUMP)
-				di_flags |= XFS_DIFLAG_NODUMP;
-			if (vap->va_xflags & XFS_XFLAG_PROJINHERIT)
-				di_flags |= XFS_DIFLAG_PROJINHERIT;
-			if (vap->va_xflags & XFS_XFLAG_NODEFRAG)
-				di_flags |= XFS_DIFLAG_NODEFRAG;
-			if (vap->va_xflags & XFS_XFLAG_FILESTREAM)
-				di_flags |= XFS_DIFLAG_FILESTREAM;
-			if ((ip->i_d.di_mode & S_IFMT) == S_IFDIR) {
-				if (vap->va_xflags & XFS_XFLAG_RTINHERIT)
-					di_flags |= XFS_DIFLAG_RTINHERIT;
-				if (vap->va_xflags & XFS_XFLAG_NOSYMLINKS)
-					di_flags |= XFS_DIFLAG_NOSYMLINKS;
-				if (vap->va_xflags & XFS_XFLAG_EXTSZINHERIT)
-					di_flags |= XFS_DIFLAG_EXTSZINHERIT;
-			} else if ((ip->i_d.di_mode & S_IFMT) == S_IFREG) {
-				if (vap->va_xflags & XFS_XFLAG_REALTIME)
-					di_flags |= XFS_DIFLAG_REALTIME;
-				if (vap->va_xflags & XFS_XFLAG_EXTSIZE)
-					di_flags |= XFS_DIFLAG_EXTSIZE;
-			}
-			ip->i_d.di_flags = di_flags;
-		}
-		xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-		timeflags |= XFS_ICHGTIME_CHG;
-	}
-
-	/*
-	 * Change file inode change time only if XFS_AT_CTIME set
+	 * Change file inode change time only if ATTR_CTIME set
 	 * AND we have been called by a DMI function.
 	 */
 
-	if ( (flags & ATTR_DMI) && (mask & XFS_AT_CTIME) ) {
-		ip->i_d.di_ctime.t_sec = vap->va_ctime.tv_sec;
-		ip->i_d.di_ctime.t_nsec = vap->va_ctime.tv_nsec;
+	if ((flags & XFS_ATTR_DMI) && (mask & ATTR_CTIME)) {
+		inode->i_ctime = iattr->ia_ctime;
+		ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec;
+		ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec;
 		ip->i_update_core = 1;
 		timeflags &= ~XFS_ICHGTIME_CHG;
 	}
@@ -704,7 +542,7 @@ xfs_setattr(
 	 * Send out timestamp changes that need to be set to the
 	 * current time.  Not done when called by a DMI function.
 	 */
-	if (timeflags && !(flags & ATTR_DMI))
+	if (timeflags && !(flags & XFS_ATTR_DMI))
 		xfs_ichgtime(ip, timeflags);
 
 	XFS_STATS_INC(xs_ig_attrchg);
@@ -742,7 +580,7 @@ xfs_setattr(
 	}
 
 	if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE) &&
-	    !(flags & ATTR_DMI)) {
+	    !(flags & XFS_ATTR_DMI)) {
 		(void) XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL,
 					NULL, DM_RIGHT_NULL, NULL, NULL,
 					0, 0, AT_DELAY_FLAG(flags));
@@ -875,7 +713,7 @@ xfs_fsync(
 		return XFS_ERROR(EIO);
 
 	/* capture size updates in I/O completion before writing the inode. */
-	error = filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping);
+	error = filemap_fdatawait(VFS_I(ip)->i_mapping);
 	if (error)
 		return XFS_ERROR(error);
 
@@ -1321,7 +1159,6 @@ int
 xfs_release(
 	xfs_inode_t	*ip)
 {
-	bhv_vnode_t	*vp = XFS_ITOV(ip);
 	xfs_mount_t	*mp = ip->i_mount;
 	int		error;
 
@@ -1356,13 +1193,13 @@ xfs_release(
 		 * be exposed to that problem.
 		 */
 		truncated = xfs_iflags_test_and_clear(ip, XFS_ITRUNCATED);
-		if (truncated && VN_DIRTY(vp) && ip->i_delayed_blks > 0)
+		if (truncated && VN_DIRTY(VFS_I(ip)) && ip->i_delayed_blks > 0)
 			xfs_flush_pages(ip, 0, -1, XFS_B_ASYNC, FI_NONE);
 	}
 
 	if (ip->i_d.di_nlink != 0) {
 		if ((((ip->i_d.di_mode & S_IFMT) == S_IFREG) &&
-		     ((ip->i_size > 0) || (VN_CACHED(vp) > 0 ||
+		     ((ip->i_size > 0) || (VN_CACHED(VFS_I(ip)) > 0 ||
 		       ip->i_delayed_blks > 0)) &&
 		     (ip->i_df.if_flags & XFS_IFEXTENTS))  &&
 		    (!(ip->i_d.di_flags &
@@ -1388,7 +1225,6 @@ int
 xfs_inactive(
 	xfs_inode_t	*ip)
 {
-	bhv_vnode_t	*vp = XFS_ITOV(ip);
 	xfs_bmap_free_t	free_list;
 	xfs_fsblock_t	first_block;
 	int		committed;
@@ -1403,7 +1239,7 @@ xfs_inactive(
 	 * If the inode is already free, then there can be nothing
 	 * to clean up here.
 	 */
-	if (ip->i_d.di_mode == 0 || VN_BAD(vp)) {
+	if (ip->i_d.di_mode == 0 || VN_BAD(VFS_I(ip))) {
 		ASSERT(ip->i_df.if_real_bytes == 0);
 		ASSERT(ip->i_df.if_broot_bytes == 0);
 		return VN_INACTIVE_CACHE;
@@ -1433,7 +1269,7 @@ xfs_inactive(
 
 	if (ip->i_d.di_nlink != 0) {
 		if ((((ip->i_d.di_mode & S_IFMT) == S_IFREG) &&
-                     ((ip->i_size > 0) || (VN_CACHED(vp) > 0 ||
+                     ((ip->i_size > 0) || (VN_CACHED(VFS_I(ip)) > 0 ||
                        ip->i_delayed_blks > 0)) &&
 		      (ip->i_df.if_flags & XFS_IFEXTENTS) &&
 		     (!(ip->i_d.di_flags &
@@ -1601,12 +1437,18 @@ xfs_inactive(
 	return VN_INACTIVE_CACHE;
 }
 
-
+/*
+ * Lookups up an inode from "name". If ci_name is not NULL, then a CI match
+ * is allowed, otherwise it has to be an exact match. If a CI match is found,
+ * ci_name->name will point to a the actual name (caller must free) or
+ * will be set to NULL if an exact match is found.
+ */
 int
 xfs_lookup(
 	xfs_inode_t		*dp,
 	struct xfs_name		*name,
-	xfs_inode_t		**ipp)
+	xfs_inode_t		**ipp,
+	struct xfs_name		*ci_name)
 {
 	xfs_ino_t		inum;
 	int			error;
@@ -1618,7 +1460,7 @@ xfs_lookup(
 		return XFS_ERROR(EIO);
 
 	lock_mode = xfs_ilock_map_shared(dp);
-	error = xfs_dir_lookup(NULL, dp, name, &inum);
+	error = xfs_dir_lookup(NULL, dp, name, &inum, ci_name);
 	xfs_iunlock_map_shared(dp, lock_mode);
 
 	if (error)
@@ -1626,12 +1468,15 @@ xfs_lookup(
 
 	error = xfs_iget(dp->i_mount, NULL, inum, 0, 0, ipp, 0);
 	if (error)
-		goto out;
+		goto out_free_name;
 
 	xfs_itrace_ref(*ipp);
 	return 0;
 
- out:
+out_free_name:
+	if (ci_name)
+		kmem_free(ci_name->name);
+out:
 	*ipp = NULL;
 	return error;
 }
@@ -1688,7 +1533,7 @@ xfs_create(
 	 * Make sure that we have allocated dquot(s) on disk.
 	 */
 	error = XFS_QM_DQVOPALLOC(mp, dp,
-			current_fsuid(credp), current_fsgid(credp), prid,
+			current_fsuid(), current_fsgid(), prid,
 			XFS_QMOPT_QUOTALL|XFS_QMOPT_INHERIT, &udqp, &gdqp);
 	if (error)
 		goto std_return;
@@ -1860,111 +1705,6 @@ std_return:
 }
 
 #ifdef DEBUG
-/*
- * Some counters to see if (and how often) we are hitting some deadlock
- * prevention code paths.
- */
-
-int xfs_rm_locks;
-int xfs_rm_lock_delays;
-int xfs_rm_attempts;
-#endif
-
-/*
- * The following routine will lock the inodes associated with the
- * directory and the named entry in the directory. The locks are
- * acquired in increasing inode number.
- *
- * If the entry is "..", then only the directory is locked. The
- * vnode ref count will still include that from the .. entry in
- * this case.
- *
- * There is a deadlock we need to worry about. If the locked directory is
- * in the AIL, it might be blocking up the log. The next inode we lock
- * could be already locked by another thread waiting for log space (e.g
- * a permanent log reservation with a long running transaction (see
- * xfs_itruncate_finish)). To solve this, we must check if the directory
- * is in the ail and use lock_nowait. If we can't lock, we need to
- * drop the inode lock on the directory and try again. xfs_iunlock will
- * potentially push the tail if we were holding up the log.
- */
-STATIC int
-xfs_lock_dir_and_entry(
-	xfs_inode_t	*dp,
-	xfs_inode_t	*ip)	/* inode of entry 'name' */
-{
-	int		attempts;
-	xfs_ino_t	e_inum;
-	xfs_inode_t	*ips[2];
-	xfs_log_item_t	*lp;
-
-#ifdef DEBUG
-	xfs_rm_locks++;
-#endif
-	attempts = 0;
-
-again:
-	xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT);
-
-	e_inum = ip->i_ino;
-
-	xfs_itrace_ref(ip);
-
-	/*
-	 * We want to lock in increasing inum. Since we've already
-	 * acquired the lock on the directory, we may need to release
-	 * if if the inum of the entry turns out to be less.
-	 */
-	if (e_inum > dp->i_ino) {
-		/*
-		 * We are already in the right order, so just
-		 * lock on the inode of the entry.
-		 * We need to use nowait if dp is in the AIL.
-		 */
-
-		lp = (xfs_log_item_t *)dp->i_itemp;
-		if (lp && (lp->li_flags & XFS_LI_IN_AIL)) {
-			if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
-				attempts++;
-#ifdef DEBUG
-				xfs_rm_attempts++;
-#endif
-
-				/*
-				 * Unlock dp and try again.
-				 * xfs_iunlock will try to push the tail
-				 * if the inode is in the AIL.
-				 */
-
-				xfs_iunlock(dp, XFS_ILOCK_EXCL);
-
-				if ((attempts % 5) == 0) {
-					delay(1); /* Don't just spin the CPU */
-#ifdef DEBUG
-					xfs_rm_lock_delays++;
-#endif
-				}
-				goto again;
-			}
-		} else {
-			xfs_ilock(ip, XFS_ILOCK_EXCL);
-		}
-	} else if (e_inum < dp->i_ino) {
-		xfs_iunlock(dp, XFS_ILOCK_EXCL);
-
-		ips[0] = ip;
-		ips[1] = dp;
-		xfs_lock_inodes(ips, 2, XFS_ILOCK_EXCL);
-	}
-	/* else	 e_inum == dp->i_ino */
-	/*     This can happen if we're asked to lock /x/..
-	 *     the entry is "..", which is also the parent directory.
-	 */
-
-	return 0;
-}
-
-#ifdef DEBUG
 int xfs_locked_n;
 int xfs_small_retries;
 int xfs_middle_retries;
@@ -2098,12 +1838,52 @@ again:
 #endif
 }
 
-#ifdef	DEBUG
-#define	REMOVE_DEBUG_TRACE(x)	{remove_which_error_return = (x);}
-int remove_which_error_return = 0;
-#else /* ! DEBUG */
-#define	REMOVE_DEBUG_TRACE(x)
-#endif	/* ! DEBUG */
+/*
+ * xfs_lock_two_inodes() can only be used to lock one type of lock
+ * at a time - the iolock or the ilock, but not both at once. If
+ * we lock both at once, lockdep will report false positives saying
+ * we have violated locking orders.
+ */
+void
+xfs_lock_two_inodes(
+	xfs_inode_t		*ip0,
+	xfs_inode_t		*ip1,
+	uint			lock_mode)
+{
+	xfs_inode_t		*temp;
+	int			attempts = 0;
+	xfs_log_item_t		*lp;
+
+	if (lock_mode & (XFS_IOLOCK_SHARED|XFS_IOLOCK_EXCL))
+		ASSERT((lock_mode & (XFS_ILOCK_SHARED|XFS_ILOCK_EXCL)) == 0);
+	ASSERT(ip0->i_ino != ip1->i_ino);
+
+	if (ip0->i_ino > ip1->i_ino) {
+		temp = ip0;
+		ip0 = ip1;
+		ip1 = temp;
+	}
+
+ again:
+	xfs_ilock(ip0, xfs_lock_inumorder(lock_mode, 0));
+
+	/*
+	 * If the first lock we have locked is in the AIL, we must TRY to get
+	 * the second lock. If we can't get it, we must release the first one
+	 * and try again.
+	 */
+	lp = (xfs_log_item_t *)ip0->i_itemp;
+	if (lp && (lp->li_flags & XFS_LI_IN_AIL)) {
+		if (!xfs_ilock_nowait(ip1, xfs_lock_inumorder(lock_mode, 1))) {
+			xfs_iunlock(ip0, lock_mode);
+			if ((++attempts % 5) == 0)
+				delay(1); /* Don't just spin the CPU */
+			goto again;
+		}
+	} else {
+		xfs_ilock(ip1, xfs_lock_inumorder(lock_mode, 1));
+	}
+}
 
 int
 xfs_remove(
@@ -2113,6 +1893,7 @@ xfs_remove(
 {
 	xfs_mount_t		*mp = dp->i_mount;
 	xfs_trans_t             *tp = NULL;
+	int			is_dir = S_ISDIR(ip->i_d.di_mode);
 	int                     error = 0;
 	xfs_bmap_free_t         free_list;
 	xfs_fsblock_t           first_block;
@@ -2120,8 +1901,10 @@ xfs_remove(
 	int			committed;
 	int			link_zero;
 	uint			resblks;
+	uint			log_count;
 
 	xfs_itrace_entry(dp);
+	xfs_itrace_entry(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
@@ -2134,19 +1917,23 @@ xfs_remove(
 			return error;
 	}
 
-	xfs_itrace_entry(ip);
-	xfs_itrace_ref(ip);
-
 	error = XFS_QM_DQATTACH(mp, dp, 0);
-	if (!error)
-		error = XFS_QM_DQATTACH(mp, ip, 0);
-	if (error) {
-		REMOVE_DEBUG_TRACE(__LINE__);
+	if (error)
 		goto std_return;
-	}
 
-	tp = xfs_trans_alloc(mp, XFS_TRANS_REMOVE);
+	error = XFS_QM_DQATTACH(mp, ip, 0);
+	if (error)
+		goto std_return;
+
+	if (is_dir) {
+		tp = xfs_trans_alloc(mp, XFS_TRANS_RMDIR);
+		log_count = XFS_DEFAULT_LOG_COUNT;
+	} else {
+		tp = xfs_trans_alloc(mp, XFS_TRANS_REMOVE);
+		log_count = XFS_REMOVE_LOG_COUNT;
+	}
 	cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
+
 	/*
 	 * We try to get the real space reservation first,
 	 * allowing for directory btree deletion(s) implying
@@ -2158,25 +1945,19 @@ xfs_remove(
 	 */
 	resblks = XFS_REMOVE_SPACE_RES(mp);
 	error = xfs_trans_reserve(tp, resblks, XFS_REMOVE_LOG_RES(mp), 0,
-			XFS_TRANS_PERM_LOG_RES, XFS_REMOVE_LOG_COUNT);
+				  XFS_TRANS_PERM_LOG_RES, log_count);
 	if (error == ENOSPC) {
 		resblks = 0;
 		error = xfs_trans_reserve(tp, 0, XFS_REMOVE_LOG_RES(mp), 0,
-				XFS_TRANS_PERM_LOG_RES, XFS_REMOVE_LOG_COUNT);
+					  XFS_TRANS_PERM_LOG_RES, log_count);
 	}
 	if (error) {
 		ASSERT(error != ENOSPC);
-		REMOVE_DEBUG_TRACE(__LINE__);
-		xfs_trans_cancel(tp, 0);
-		return error;
+		cancel_flags = 0;
+		goto out_trans_cancel;
 	}
 
-	error = xfs_lock_dir_and_entry(dp, ip);
-	if (error) {
-		REMOVE_DEBUG_TRACE(__LINE__);
-		xfs_trans_cancel(tp, cancel_flags);
-		goto std_return;
-	}
+	xfs_lock_two_inodes(dp, ip, XFS_ILOCK_EXCL);
 
 	/*
 	 * At this point, we've gotten both the directory and the entry
@@ -2189,46 +1970,83 @@ xfs_remove(
 	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
 
 	/*
-	 * Entry must exist since we did a lookup in xfs_lock_dir_and_entry.
+	 * If we're removing a directory perform some additional validation.
 	 */
+	if (is_dir) {
+		ASSERT(ip->i_d.di_nlink >= 2);
+		if (ip->i_d.di_nlink != 2) {
+			error = XFS_ERROR(ENOTEMPTY);
+			goto out_trans_cancel;
+		}
+		if (!xfs_dir_isempty(ip)) {
+			error = XFS_ERROR(ENOTEMPTY);
+			goto out_trans_cancel;
+		}
+	}
+
 	XFS_BMAP_INIT(&free_list, &first_block);
 	error = xfs_dir_removename(tp, dp, name, ip->i_ino,
 					&first_block, &free_list, resblks);
 	if (error) {
 		ASSERT(error != ENOENT);
-		REMOVE_DEBUG_TRACE(__LINE__);
-		goto error1;
+		goto out_bmap_cancel;
 	}
 	xfs_ichgtime(dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
 
+	/*
+	 * Bump the in memory generation count on the parent
+	 * directory so that other can know that it has changed.
+	 */
 	dp->i_gen++;
 	xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE);
 
-	error = xfs_droplink(tp, ip);
-	if (error) {
-		REMOVE_DEBUG_TRACE(__LINE__);
-		goto error1;
+	if (is_dir) {
+		/*
+		 * Drop the link from ip's "..".
+		 */
+		error = xfs_droplink(tp, dp);
+		if (error)
+			goto out_bmap_cancel;
+
+		/*
+		 * Drop the link from dp to ip.
+		 */
+		error = xfs_droplink(tp, ip);
+		if (error)
+			goto out_bmap_cancel;
+	} else {
+		/*
+		 * When removing a non-directory we need to log the parent
+		 * inode here for the i_gen update.  For a directory this is
+		 * done implicitly by the xfs_droplink call for the ".." entry.
+		 */
+		xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE);
 	}
 
-	/* Determine if this is the last link while
+	/*
+	 * Drop the "." link from ip to self.
+	 */
+	error = xfs_droplink(tp, ip);
+	if (error)
+		goto out_bmap_cancel;
+
+	/*
+	 * Determine if this is the last link while
 	 * we are in the transaction.
 	 */
-	link_zero = (ip)->i_d.di_nlink==0;
+	link_zero = (ip->i_d.di_nlink == 0);
 
 	/*
 	 * If this is a synchronous mount, make sure that the
 	 * remove transaction goes to disk before returning to
 	 * the user.
 	 */
-	if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) {
+	if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC))
 		xfs_trans_set_sync(tp);
-	}
 
 	error = xfs_bmap_finish(&tp, &free_list, &committed);
-	if (error) {
-		REMOVE_DEBUG_TRACE(__LINE__);
-		goto error_rele;
-	}
+	if (error)
+		goto out_bmap_cancel;
 
 	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
 	if (error)
@@ -2240,38 +2058,26 @@ xfs_remove(
 	 * will get killed on last close in xfs_close() so we don't
 	 * have to worry about that.
 	 */
-	if (link_zero && xfs_inode_is_filestream(ip))
+	if (!is_dir && link_zero && xfs_inode_is_filestream(ip))
 		xfs_filestream_deassociate(ip);
 
 	xfs_itrace_exit(ip);
+	xfs_itrace_exit(dp);
 
-/*	Fall through to std_return with error = 0 */
  std_return:
 	if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) {
-		(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE,
-				dp, DM_RIGHT_NULL,
-				NULL, DM_RIGHT_NULL,
-				name->name, NULL, ip->i_d.di_mode, error, 0);
+		XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE, dp, DM_RIGHT_NULL,
+				NULL, DM_RIGHT_NULL, name->name, NULL,
+				ip->i_d.di_mode, error, 0);
 	}
-	return error;
 
- error1:
-	xfs_bmap_cancel(&free_list);
-	cancel_flags |= XFS_TRANS_ABORT;
-	xfs_trans_cancel(tp, cancel_flags);
-	goto std_return;
+	return error;
 
- error_rele:
-	/*
-	 * In this case make sure to not release the inode until after
-	 * the current transaction is aborted.  Releasing it beforehand
-	 * can cause us to go to xfs_inactive and start a recursive
-	 * transaction which can easily deadlock with the current one.
-	 */
+ out_bmap_cancel:
 	xfs_bmap_cancel(&free_list);
 	cancel_flags |= XFS_TRANS_ABORT;
+ out_trans_cancel:
 	xfs_trans_cancel(tp, cancel_flags);
-
 	goto std_return;
 }
 
@@ -2283,7 +2089,6 @@ xfs_link(
 {
 	xfs_mount_t		*mp = tdp->i_mount;
 	xfs_trans_t		*tp;
-	xfs_inode_t		*ips[2];
 	int			error;
 	xfs_bmap_free_t         free_list;
 	xfs_fsblock_t           first_block;
@@ -2331,15 +2136,7 @@ xfs_link(
 		goto error_return;
 	}
 
-	if (sip->i_ino < tdp->i_ino) {
-		ips[0] = sip;
-		ips[1] = tdp;
-	} else {
-		ips[0] = tdp;
-		ips[1] = sip;
-	}
-
-	xfs_lock_inodes(ips, 2, XFS_ILOCK_EXCL);
+	xfs_lock_two_inodes(sip, tdp, XFS_ILOCK_EXCL);
 
 	/*
 	 * Increment vnode ref counts since xfs_trans_commit &
@@ -2480,7 +2277,7 @@ xfs_mkdir(
 	 * Make sure that we have allocated dquot(s) on disk.
 	 */
 	error = XFS_QM_DQVOPALLOC(mp, dp,
-			current_fsuid(credp), current_fsgid(credp), prid,
+			current_fsuid(), current_fsgid(), prid,
 			XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp);
 	if (error)
 		goto std_return;
@@ -2638,186 +2435,6 @@ std_return:
 }
 
 int
-xfs_rmdir(
-	xfs_inode_t             *dp,
-	struct xfs_name		*name,
-	xfs_inode_t		*cdp)
-{
-	xfs_mount_t		*mp = dp->i_mount;
-	xfs_trans_t             *tp;
-	int                     error;
-	xfs_bmap_free_t         free_list;
-	xfs_fsblock_t           first_block;
-	int			cancel_flags;
-	int			committed;
-	int			last_cdp_link;
-	uint			resblks;
-
-	xfs_itrace_entry(dp);
-
-	if (XFS_FORCED_SHUTDOWN(mp))
-		return XFS_ERROR(EIO);
-
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_REMOVE)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_REMOVE,
-					dp, DM_RIGHT_NULL,
-					NULL, DM_RIGHT_NULL, name->name,
-					NULL, cdp->i_d.di_mode, 0, 0);
-		if (error)
-			return XFS_ERROR(error);
-	}
-
-	/*
-	 * Get the dquots for the inodes.
-	 */
-	error = XFS_QM_DQATTACH(mp, dp, 0);
-	if (!error)
-		error = XFS_QM_DQATTACH(mp, cdp, 0);
-	if (error) {
-		REMOVE_DEBUG_TRACE(__LINE__);
-		goto std_return;
-	}
-
-	tp = xfs_trans_alloc(mp, XFS_TRANS_RMDIR);
-	cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
-	/*
-	 * We try to get the real space reservation first,
-	 * allowing for directory btree deletion(s) implying
-	 * possible bmap insert(s).  If we can't get the space
-	 * reservation then we use 0 instead, and avoid the bmap
-	 * btree insert(s) in the directory code by, if the bmap
-	 * insert tries to happen, instead trimming the LAST
-	 * block from the directory.
-	 */
-	resblks = XFS_REMOVE_SPACE_RES(mp);
-	error = xfs_trans_reserve(tp, resblks, XFS_REMOVE_LOG_RES(mp), 0,
-			XFS_TRANS_PERM_LOG_RES, XFS_DEFAULT_LOG_COUNT);
-	if (error == ENOSPC) {
-		resblks = 0;
-		error = xfs_trans_reserve(tp, 0, XFS_REMOVE_LOG_RES(mp), 0,
-				XFS_TRANS_PERM_LOG_RES, XFS_DEFAULT_LOG_COUNT);
-	}
-	if (error) {
-		ASSERT(error != ENOSPC);
-		cancel_flags = 0;
-		goto error_return;
-	}
-	XFS_BMAP_INIT(&free_list, &first_block);
-
-	/*
-	 * Now lock the child directory inode and the parent directory
-	 * inode in the proper order.  This will take care of validating
-	 * that the directory entry for the child directory inode has
-	 * not changed while we were obtaining a log reservation.
-	 */
-	error = xfs_lock_dir_and_entry(dp, cdp);
-	if (error) {
-		xfs_trans_cancel(tp, cancel_flags);
-		goto std_return;
-	}
-
-	IHOLD(dp);
-	xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
-
-	IHOLD(cdp);
-	xfs_trans_ijoin(tp, cdp, XFS_ILOCK_EXCL);
-
-	ASSERT(cdp->i_d.di_nlink >= 2);
-	if (cdp->i_d.di_nlink != 2) {
-		error = XFS_ERROR(ENOTEMPTY);
-		goto error_return;
-	}
-	if (!xfs_dir_isempty(cdp)) {
-		error = XFS_ERROR(ENOTEMPTY);
-		goto error_return;
-	}
-
-	error = xfs_dir_removename(tp, dp, name, cdp->i_ino,
-					&first_block, &free_list, resblks);
-	if (error)
-		goto error1;
-
-	xfs_ichgtime(dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
-
-	/*
-	 * Bump the in memory generation count on the parent
-	 * directory so that other can know that it has changed.
-	 */
-	dp->i_gen++;
-
-	/*
-	 * Drop the link from cdp's "..".
-	 */
-	error = xfs_droplink(tp, dp);
-	if (error) {
-		goto error1;
-	}
-
-	/*
-	 * Drop the link from dp to cdp.
-	 */
-	error = xfs_droplink(tp, cdp);
-	if (error) {
-		goto error1;
-	}
-
-	/*
-	 * Drop the "." link from cdp to self.
-	 */
-	error = xfs_droplink(tp, cdp);
-	if (error) {
-		goto error1;
-	}
-
-	/* Determine these before committing transaction */
-	last_cdp_link = (cdp)->i_d.di_nlink==0;
-
-	/*
-	 * If this is a synchronous mount, make sure that the
-	 * rmdir transaction goes to disk before returning to
-	 * the user.
-	 */
-	if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) {
-		xfs_trans_set_sync(tp);
-	}
-
-	error = xfs_bmap_finish (&tp, &free_list, &committed);
-	if (error) {
-		xfs_bmap_cancel(&free_list);
-		xfs_trans_cancel(tp, (XFS_TRANS_RELEASE_LOG_RES |
-				 XFS_TRANS_ABORT));
-		goto std_return;
-	}
-
-	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
-	if (error) {
-		goto std_return;
-	}
-
-
-	/* Fall through to std_return with error = 0 or the errno
-	 * from xfs_trans_commit. */
- std_return:
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) {
-		(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE,
-					dp, DM_RIGHT_NULL,
-					NULL, DM_RIGHT_NULL,
-					name->name, NULL, cdp->i_d.di_mode,
-					error, 0);
-	}
-	return error;
-
- error1:
-	xfs_bmap_cancel(&free_list);
-	cancel_flags |= XFS_TRANS_ABORT;
-	/* FALLTHROUGH */
-
- error_return:
-	xfs_trans_cancel(tp, cancel_flags);
-	goto std_return;
-}
-
-int
 xfs_symlink(
 	xfs_inode_t		*dp,
 	struct xfs_name		*link_name,
@@ -2886,7 +2503,7 @@ xfs_symlink(
 	 * Make sure that we have allocated dquot(s) on disk.
 	 */
 	error = XFS_QM_DQVOPALLOC(mp, dp,
-			current_fsuid(credp), current_fsgid(credp), prid,
+			current_fsuid(), current_fsgid(), prid,
 			XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp);
 	if (error)
 		goto std_return;
@@ -3181,14 +2798,13 @@ int
 xfs_reclaim(
 	xfs_inode_t	*ip)
 {
-	bhv_vnode_t	*vp = XFS_ITOV(ip);
 
 	xfs_itrace_entry(ip);
 
-	ASSERT(!VN_MAPPED(vp));
+	ASSERT(!VN_MAPPED(VFS_I(ip)));
 
 	/* bad inode, get out here ASAP */
-	if (VN_BAD(vp)) {
+	if (VN_BAD(VFS_I(ip))) {
 		xfs_ireclaim(ip);
 		return 0;
 	}
@@ -3225,7 +2841,7 @@ xfs_reclaim(
 		XFS_MOUNT_ILOCK(mp);
 		spin_lock(&ip->i_flags_lock);
 		__xfs_iflags_set(ip, XFS_IRECLAIMABLE);
-		vn_to_inode(vp)->i_private = NULL;
+		VFS_I(ip)->i_private = NULL;
 		ip->i_vnode = NULL;
 		spin_unlock(&ip->i_flags_lock);
 		list_add_tail(&ip->i_reclaim, &mp->m_del_inodes);
@@ -3241,8 +2857,7 @@ xfs_finish_reclaim(
 	int		sync_mode)
 {
 	xfs_perag_t	*pag = xfs_get_perag(ip->i_mount, ip->i_ino);
-	bhv_vnode_t	*vp = XFS_ITOV_NULL(ip);
-	int		error;
+	struct inode	*vp = VFS_I(ip);
 
 	if (vp && VN_BAD(vp))
 		goto reclaim;
@@ -3285,29 +2900,16 @@ xfs_finish_reclaim(
 		xfs_iflock(ip);
 	}
 
-	if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
-		if (ip->i_update_core ||
-		    ((ip->i_itemp != NULL) &&
-		     (ip->i_itemp->ili_format.ilf_fields != 0))) {
-			error = xfs_iflush(ip, sync_mode);
-			/*
-			 * If we hit an error, typically because of filesystem
-			 * shutdown, we don't need to let vn_reclaim to know
-			 * because we're gonna reclaim the inode anyway.
-			 */
-			if (error) {
-				xfs_iunlock(ip, XFS_ILOCK_EXCL);
-				goto reclaim;
-			}
-			xfs_iflock(ip); /* synchronize with xfs_iflush_done */
-		}
-
-		ASSERT(ip->i_update_core == 0);
-		ASSERT(ip->i_itemp == NULL ||
-		       ip->i_itemp->ili_format.ilf_fields == 0);
+	/*
+	 * In the case of a forced shutdown we rely on xfs_iflush() to
+	 * wait for the inode to be unpinned before returning an error.
+	 */
+	if (xfs_iflush(ip, sync_mode) == 0) {
+		/* synchronize with xfs_iflush_done */
+		xfs_iflock(ip);
+		xfs_ifunlock(ip);
 	}
 
-	xfs_ifunlock(ip);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL);
 
  reclaim:
@@ -3418,7 +3020,7 @@ xfs_alloc_file_space(
 
 	/*	Generate a DMAPI event if needed.	*/
 	if (alloc_type != 0 && offset < ip->i_size &&
-			(attr_flags&ATTR_DMI) == 0  &&
+			(attr_flags & XFS_ATTR_DMI) == 0  &&
 			DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) {
 		xfs_off_t           end_dmi_offset;
 
@@ -3532,7 +3134,7 @@ retry:
 		allocatesize_fsb -= allocated_fsb;
 	}
 dmapi_enospc_check:
-	if (error == ENOSPC && (attr_flags & ATTR_DMI) == 0 &&
+	if (error == ENOSPC && (attr_flags & XFS_ATTR_DMI) == 0 &&
 	    DM_EVENT_ENABLED(ip, DM_EVENT_NOSPACE)) {
 		error = XFS_SEND_NAMESP(mp, DM_EVENT_NOSPACE,
 				ip, DM_RIGHT_NULL,
@@ -3558,6 +3160,13 @@ error1:	/* Just cancel transaction */
 /*
  * Zero file bytes between startoff and endoff inclusive.
  * The iolock is held exclusive and no blocks are buffered.
+ *
+ * This function is used by xfs_free_file_space() to zero
+ * partial blocks when the range to free is not block aligned.
+ * When unreserving space with boundaries that are not block
+ * aligned we round up the start and round down the end
+ * boundaries and then use this function to zero the parts of
+ * the blocks that got dropped during the rounding.
  */
 STATIC int
 xfs_zero_remaining_bytes(
@@ -3574,6 +3183,17 @@ xfs_zero_remaining_bytes(
 	int			nimap;
 	int			error = 0;
 
+	/*
+	 * Avoid doing I/O beyond eof - it's not necessary
+	 * since nothing can read beyond eof.  The space will
+	 * be zeroed when the file is extended anyway.
+	 */
+	if (startoff >= ip->i_size)
+		return 0;
+
+	if (endoff > ip->i_size)
+		endoff = ip->i_size;
+
 	bp = xfs_buf_get_noaddr(mp->m_sb.sb_blocksize,
 				XFS_IS_REALTIME_INODE(ip) ?
 				mp->m_rtdev_targp : mp->m_ddev_targp);
@@ -3643,7 +3263,6 @@ xfs_free_file_space(
 	xfs_off_t		len,
 	int			attr_flags)
 {
-	bhv_vnode_t		*vp;
 	int			committed;
 	int			done;
 	xfs_off_t		end_dmi_offset;
@@ -3663,7 +3282,6 @@ xfs_free_file_space(
 	xfs_trans_t		*tp;
 	int			need_iolock = 1;
 
-	vp = XFS_ITOV(ip);
 	mp = ip->i_mount;
 
 	xfs_itrace_entry(ip);
@@ -3679,7 +3297,7 @@ xfs_free_file_space(
 	end_dmi_offset = offset + len;
 	endoffset_fsb = XFS_B_TO_FSBT(mp, end_dmi_offset);
 
-	if (offset < ip->i_size && (attr_flags & ATTR_DMI) == 0 &&
+	if (offset < ip->i_size && (attr_flags & XFS_ATTR_DMI) == 0 &&
 	    DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) {
 		if (end_dmi_offset > ip->i_size)
 			end_dmi_offset = ip->i_size;
@@ -3690,7 +3308,7 @@ xfs_free_file_space(
 			return error;
 	}
 
-	if (attr_flags & ATTR_NOLOCK)
+	if (attr_flags & XFS_ATTR_NOLOCK)
 		need_iolock = 0;
 	if (need_iolock) {
 		xfs_ilock(ip, XFS_IOLOCK_EXCL);
@@ -3700,7 +3318,7 @@ xfs_free_file_space(
 	rounding = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
 	ioffset = offset & ~(rounding - 1);
 
-	if (VN_CACHED(vp) != 0) {
+	if (VN_CACHED(VFS_I(ip)) != 0) {
 		xfs_inval_cached_trace(ip, ioffset, -1, ioffset, -1);
 		error = xfs_flushinval_pages(ip, ioffset, -1, FI_REMAPF_LOCKED);
 		if (error)
@@ -3867,7 +3485,7 @@ xfs_change_file_space(
 	xfs_off_t	startoffset;
 	xfs_off_t	llen;
 	xfs_trans_t	*tp;
-	bhv_vattr_t	va;
+	struct iattr	iattr;
 
 	xfs_itrace_entry(ip);
 
@@ -3941,10 +3559,10 @@ xfs_change_file_space(
 				break;
 		}
 
-		va.va_mask = XFS_AT_SIZE;
-		va.va_size = startoffset;
+		iattr.ia_valid = ATTR_SIZE;
+		iattr.ia_size = startoffset;
 
-		error = xfs_setattr(ip, &va, attr_flags, credp);
+		error = xfs_setattr(ip, &iattr, attr_flags, credp);
 
 		if (error)
 			return error;
@@ -3974,7 +3592,7 @@ xfs_change_file_space(
 	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
 	xfs_trans_ihold(tp, ip);
 
-	if ((attr_flags & ATTR_DMI) == 0) {
+	if ((attr_flags & XFS_ATTR_DMI) == 0) {
 		ip->i_d.di_mode &= ~S_ISUID;
 
 		/*
diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h
index 57335ba4ce5..e932a96bec5 100644
--- a/fs/xfs/xfs_vnodeops.h
+++ b/fs/xfs/xfs_vnodeops.h
@@ -2,9 +2,9 @@
 #define _XFS_VNODEOPS_H 1
 
 struct attrlist_cursor_kern;
-struct bhv_vattr;
 struct cred;
 struct file;
+struct iattr;
 struct inode;
 struct iovec;
 struct kiocb;
@@ -15,14 +15,18 @@ struct xfs_iomap;
 
 
 int xfs_open(struct xfs_inode *ip);
-int xfs_setattr(struct xfs_inode *ip, struct bhv_vattr *vap, int flags,
+int xfs_setattr(struct xfs_inode *ip, struct iattr *vap, int flags,
 		struct cred *credp);
+#define	XFS_ATTR_DMI		0x01	/* invocation from a DMI function */
+#define	XFS_ATTR_NONBLOCK	0x02	/* return EAGAIN if operation would block */
+#define XFS_ATTR_NOLOCK		0x04	/* Don't grab any conflicting locks */
+
 int xfs_readlink(struct xfs_inode *ip, char *link);
 int xfs_fsync(struct xfs_inode *ip);
 int xfs_release(struct xfs_inode *ip);
 int xfs_inactive(struct xfs_inode *ip);
 int xfs_lookup(struct xfs_inode *dp, struct xfs_name *name,
-		struct xfs_inode **ipp);
+		struct xfs_inode **ipp, struct xfs_name *ci_name);
 int xfs_create(struct xfs_inode *dp, struct xfs_name *name, mode_t mode,
 		xfs_dev_t rdev, struct xfs_inode **ipp, struct cred *credp);
 int xfs_remove(struct xfs_inode *dp, struct xfs_name *name,
@@ -31,8 +35,6 @@ int xfs_link(struct xfs_inode *tdp, struct xfs_inode *sip,
 		struct xfs_name *target_name);
 int xfs_mkdir(struct xfs_inode *dp, struct xfs_name *dir_name,
 		mode_t mode, struct xfs_inode **ipp, struct cred *credp);
-int xfs_rmdir(struct xfs_inode *dp, struct xfs_name *name,
-		struct xfs_inode *cdp);
 int xfs_readdir(struct xfs_inode	*dp, void *dirent, size_t bufsize,
 		       xfs_off_t *offset, filldir_t filldir);
 int xfs_symlink(struct xfs_inode *dp, struct xfs_name *link_name,
diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h
index 9ed70a05058..c34008507b6 100644
--- a/include/acpi/acnamesp.h
+++ b/include/acpi/acnamesp.h
@@ -182,7 +182,7 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info);
  */
 u32 acpi_ns_opens_scope(acpi_object_type type);
 
-void
+acpi_status
 acpi_ns_build_external_path(struct acpi_namespace_node *node,
 			    acpi_size size, char *name_buffer);
 
diff --git a/include/asm-arm/arch-ep93xx/dma.h b/include/asm-arm/arch-ep93xx/dma.h
deleted file mode 100644
index 898b3ab7fd4..00000000000
--- a/include/asm-arm/arch-ep93xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/dma.h
- */
diff --git a/include/asm-arm/arch-ep93xx/gesbc9312.h b/include/asm-arm/arch-ep93xx/gesbc9312.h
deleted file mode 100644
index 4d0b3023bff..00000000000
--- a/include/asm-arm/arch-ep93xx/gesbc9312.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/gesbc9312.h
- */
diff --git a/include/asm-arm/arch-ep93xx/timex.h b/include/asm-arm/arch-ep93xx/timex.h
deleted file mode 100644
index 4140bddc97e..00000000000
--- a/include/asm-arm/arch-ep93xx/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/timex.h
- */
-
-#define CLOCK_TICK_RATE		983040
diff --git a/include/asm-arm/arch-ep93xx/vmalloc.h b/include/asm-arm/arch-ep93xx/vmalloc.h
deleted file mode 100644
index 205ea6b1cf5..00000000000
--- a/include/asm-arm/arch-ep93xx/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-iop32x/vmalloc.h b/include/asm-arm/arch-iop32x/vmalloc.h
deleted file mode 100644
index 0a70baa1951..00000000000
--- a/include/asm-arm/arch-iop32x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-iop33x/vmalloc.h b/include/asm-arm/arch-iop33x/vmalloc.h
deleted file mode 100644
index 66f545a7f4f..00000000000
--- a/include/asm-arm/arch-iop33x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-ixp23xx/dma.h b/include/asm-arm/arch-ixp23xx/dma.h
deleted file mode 100644
index 2f4335e3b83..00000000000
--- a/include/asm-arm/arch-ixp23xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/dma.h
- */
diff --git a/include/asm-arm/arch-ixp23xx/time.h b/include/asm-arm/arch-ixp23xx/time.h
deleted file mode 100644
index f6828fdd288..00000000000
--- a/include/asm-arm/arch-ixp23xx/time.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/time.h
- */
diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h
deleted file mode 100644
index 41852c6e77f..00000000000
--- a/include/asm-arm/arch-kirkwood/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-loki/vmalloc.h b/include/asm-arm/arch-loki/vmalloc.h
deleted file mode 100644
index f5be0622049..00000000000
--- a/include/asm-arm/arch-loki/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-loki/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-mv78xx0/vmalloc.h b/include/asm-arm/arch-mv78xx0/vmalloc.h
deleted file mode 100644
index f2c51219757..00000000000
--- a/include/asm-arm/arch-mv78xx0/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-orion5x/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h
deleted file mode 100644
index 2b3061e90dc..00000000000
--- a/include/asm-arm/arch-orion5x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/vmalloc.h
- */
-
-#define VMALLOC_END       0xfd800000
diff --git a/include/asm-arm/arch-sa1100/vmalloc.h b/include/asm-arm/arch-sa1100/vmalloc.h
deleted file mode 100644
index 2fb1c6f3aa1..00000000000
--- a/include/asm-arm/arch-sa1100/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/vmalloc.h
- */
-#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/hardware.h b/include/asm-arm/hardware.h
deleted file mode 100644
index 1fd1a5b6504..00000000000
--- a/include/asm-arm/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Common hardware definitions
- */
-
-#ifndef __ASM_HARDWARE_H
-#define __ASM_HARDWARE_H
-
-#include <asm/arch/hardware.h>
-
-#endif
diff --git a/include/asm-arm/hw_irq.h b/include/asm-arm/hw_irq.h
deleted file mode 100644
index f1a08a50060..00000000000
--- a/include/asm-arm/hw_irq.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Nothing to see here yet
- */
-#ifndef _ARCH_ARM_HW_IRQ_H
-#define _ARCH_ARM_HW_IRQ_H
-
-#include <asm/mach/irq.h>
-
-#endif
diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h
index d08a1f2863e..5106acaa1d0 100644
--- a/include/asm-arm/plat-s3c/iic.h
+++ b/include/asm-arm/plat-s3c/iic.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/iic.h
+/* arch/arm/mach-s3c2410/include/mach/iic.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h
index ad6bbe90616..f4dcd14af05 100644
--- a/include/asm-arm/plat-s3c/nand.h
+++ b/include/asm-arm/plat-s3c/nand.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/nand.h
+/* arch/arm/mach-s3c2410/include/mach/nand.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/include/asm-arm/plat-s3c/regs-ac97.h
index b004dee6bca..c3878f7acb8 100644
--- a/include/asm-arm/plat-s3c/regs-ac97.h
+++ b/include/asm-arm/plat-s3c/regs-ac97.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-ac97.h
+/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
  *
  * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h
index c7f231963e7..4323cccc86c 100644
--- a/include/asm-arm/plat-s3c/regs-adc.h
+++ b/include/asm-arm/plat-s3c/regs-adc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-adc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
  *
  * Copyright (c) 2004 Shannon Holland <holland@loser.net>
  *
diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h
index 2ae29522f25..2f7c17de8ac 100644
--- a/include/asm-arm/plat-s3c/regs-iic.h
+++ b/include/asm-arm/plat-s3c/regs-iic.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-iic.h
+/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h
index d742205ac17..b2caa4bca27 100644
--- a/include/asm-arm/plat-s3c/regs-nand.h
+++ b/include/asm-arm/plat-s3c/regs-nand.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-nand.h
+/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
  *
  * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
@@ -11,7 +11,7 @@
 */
 
 #ifndef __ASM_ARM_REGS_NAND
-#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $"
+#define __ASM_ARM_REGS_NAND
 
 
 #define S3C2410_NFREG(x) (x)
diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/include/asm-arm/plat-s3c/regs-rtc.h
index 93b03c49710..d5837cf8e40 100644
--- a/include/asm-arm/plat-s3c/regs-rtc.h
+++ b/include/asm-arm/plat-s3c/regs-rtc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-rtc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h
index 923e114db66..a0daa647b92 100644
--- a/include/asm-arm/plat-s3c/regs-serial.h
+++ b/include/asm-arm/plat-s3c/regs-serial.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-serial.h
+/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
  *
  *  From linux/include/asm-arm/hardware/serial_s3c2410.h
  *
diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h
index b5bc692f348..cc0eedd53e3 100644
--- a/include/asm-arm/plat-s3c/regs-timer.h
+++ b/include/asm-arm/plat-s3c/regs-timer.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-timer.h
+/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
@@ -12,7 +12,7 @@
 
 
 #ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $"
+#define __ASM_ARCH_REGS_TIMER_H
 
 #define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
 #define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h
index 56c4193b7a4..4938492470f 100644
--- a/include/asm-arm/plat-s3c/regs-watchdog.h
+++ b/include/asm-arm/plat-s3c/regs-watchdog.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-watchdog.h
+/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
@@ -12,7 +12,7 @@
 
 
 #ifndef __ASM_ARCH_REGS_WATCHDOG_H
-#define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $"
+#define __ASM_ARCH_REGS_WATCHDOG_H
 
 #define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
 
diff --git a/include/asm-arm/plat-s3c24xx/regs-iis.h b/include/asm-arm/plat-s3c24xx/regs-iis.h
index eaf77916a60..a6f1d5df13b 100644
--- a/include/asm-arm/plat-s3c24xx/regs-iis.h
+++ b/include/asm-arm/plat-s3c24xx/regs-iis.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-iis.h
+/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h
index ea565b007d0..2b35479ee35 100644
--- a/include/asm-arm/plat-s3c24xx/regs-spi.h
+++ b/include/asm-arm/plat-s3c24xx/regs-spi.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-spi.h
+/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
  *
  * Copyright (c) 2004 Fetron GmbH
  *
diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/include/asm-arm/plat-s3c24xx/regs-udc.h
index e1e9805d2d9..f0dd4a41b37 100644
--- a/include/asm-arm/plat-s3c24xx/regs-udc.h
+++ b/include/asm-arm/plat-s3c24xx/regs-udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-udc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
  *
  * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
  *
diff --git a/include/asm-arm/plat-s3c24xx/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h
index 36de0b83587..3cd1ec677b3 100644
--- a/include/asm-arm/plat-s3c24xx/s3c2410.h
+++ b/include/asm-arm/plat-s3c24xx/s3c2410.h
@@ -21,11 +21,11 @@ extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
 extern void s3c2410_init_clocks(int xtal);
 
-extern  int s3c2410_baseclk_add(void);
-
 #else
 #define s3c2410_init_clocks NULL
 #define s3c2410_init_uarts NULL
 #define s3c2410_map_io NULL
 #define s3c2410_init NULL
 #endif
+
+extern int s3c2410_baseclk_add(void);
diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/include/asm-arm/plat-s3c24xx/udc.h
index b8aa6cb69b5..546bb4008f4 100644
--- a/include/asm-arm/plat-s3c24xx/udc.h
+++ b/include/asm-arm/plat-s3c24xx/udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/udc.h
+/* arch/arm/mach-s3c2410/include/mach/udc.h
  *
  * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
  *
diff --git a/include/asm-blackfin/fixed_code.h b/include/asm-blackfin/fixed_code.h
deleted file mode 100644
index 37db66c7030..00000000000
--- a/include/asm-blackfin/fixed_code.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* This file defines the fixed addresses where userspace programs can find
-   atomic code sequences.  */
-
-#define FIXED_CODE_START	0x400
-
-#define SIGRETURN_STUB		0x400
-
-#define ATOMIC_SEQS_START	0x410
-
-#define ATOMIC_XCHG32		0x410
-#define ATOMIC_CAS32		0x420
-#define ATOMIC_ADD32		0x430
-#define ATOMIC_SUB32		0x440
-#define ATOMIC_IOR32		0x450
-#define ATOMIC_AND32		0x460
-#define ATOMIC_XOR32		0x470
-
-#define ATOMIC_SEQS_END		0x480
-
-#define SAFE_USER_INSTRUCTION   0x480
-
-#define FIXED_CODE_END		0x490
diff --git a/include/asm-cris/Kbuild b/include/asm-cris/Kbuild
index b7037d80d46..d5b631935ec 100644
--- a/include/asm-cris/Kbuild
+++ b/include/asm-cris/Kbuild
@@ -1,6 +1,5 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += arch/
 header-y += arch-v10/
 header-y += arch-v32/
 
diff --git a/include/asm-frv/io.h b/include/asm-frv/io.h
index 20e44fe00ab..ca7475e73b5 100644
--- a/include/asm-frv/io.h
+++ b/include/asm-frv/io.h
@@ -271,6 +271,8 @@ static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned l
 	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
 }
 
+#define ioremap_wc ioremap_nocache
+
 extern void iounmap(void volatile __iomem *addr);
 
 static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
diff --git a/include/asm-frv/unistd.h b/include/asm-frv/unistd.h
index f184eb8c047..edcfaf5f041 100644
--- a/include/asm-frv/unistd.h
+++ b/include/asm-frv/unistd.h
@@ -333,10 +333,16 @@
 #define __NR_fallocate		324
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 325
+#define NR_syscalls 333
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 /* #define __ARCH_WANT_OLD_READDIR */
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 1170dc60e63..1870d5e05f1 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,8 +1,10 @@
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+      		  $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
 header-y  += kvm.h
 endif
 
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+      		  $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
 unifdef-y += a.out.h
 endif
 unifdef-y += auxvec.h
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index a3f738cffdb..edc6ba82e09 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -97,6 +97,16 @@ extern void warn_slowpath(const char *file, const int line,
 	unlikely(__ret_warn_once);				\
 })
 
+#define WARN_ONCE(condition, format...)	({			\
+	static int __warned;					\
+	int __ret_warn_once = !!(condition);			\
+								\
+	if (unlikely(__ret_warn_once))				\
+		if (WARN(!__warned, format)) 			\
+			__warned = 1;				\
+	unlikely(__ret_warn_once);				\
+})
+
 #define WARN_ON_RATELIMIT(condition, state)			\
 		WARN_ON((condition) && __ratelimit(state))
 
diff --git a/include/asm-generic/ioctl.h b/include/asm-generic/ioctl.h
index 86418138557..15828b2d663 100644
--- a/include/asm-generic/ioctl.h
+++ b/include/asm-generic/ioctl.h
@@ -68,12 +68,16 @@
 	 ((nr)   << _IOC_NRSHIFT) | \
 	 ((size) << _IOC_SIZESHIFT))
 
+#ifdef __KERNEL__
 /* provoke compile error for invalid uses of size argument */
 extern unsigned int __invalid_size_argument_for_IOC;
 #define _IOC_TYPECHECK(t) \
 	((sizeof(t) == sizeof(t[1]) && \
 	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
 	  sizeof(t) : __invalid_size_argument_for_IOC)
+#else
+#define _IOC_TYPECHECK(t) (sizeof(t))
+#endif
 
 /* used to create numbers */
 #define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
index be4af0029ac..71ef3f0b968 100644
--- a/include/asm-generic/rtc.h
+++ b/include/asm-generic/rtc.h
@@ -15,6 +15,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>
+#include <linux/delay.h>
 
 #define RTC_PIE 0x40		/* periodic interrupt enable */
 #define RTC_AIE 0x20		/* alarm interrupt enable */
@@ -43,7 +44,6 @@ static inline unsigned char rtc_is_updating(void)
 
 static inline unsigned int get_rtc_time(struct rtc_time *time)
 {
-	unsigned long uip_watchdog = jiffies;
 	unsigned char ctrl;
 	unsigned long flags;
 
@@ -53,19 +53,15 @@ static inline unsigned int get_rtc_time(struct rtc_time *time)
 
 	/*
 	 * read RTC once any update in progress is done. The update
-	 * can take just over 2ms. We wait 10 to 20ms. There is no need to
+	 * can take just over 2ms. We wait 20ms. There is no need to
 	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
 	 * If you need to know *exactly* when a second has started, enable
 	 * periodic update complete interrupts, (via ioctl) and then 
 	 * immediately read /dev/rtc which will block until you get the IRQ.
 	 * Once the read clears, read the RTC time (again via ioctl). Easy.
 	 */
-
-	if (rtc_is_updating() != 0)
-		while (jiffies - uip_watchdog < 2*HZ/100) {
-			barrier();
-			cpu_relax();
-		}
+	if (rtc_is_updating())
+		mdelay(20);
 
 	/*
 	 * Only the values that we read from the RTC are set. We leave
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
index 8feeae1f236..79a7ff925bf 100644
--- a/include/asm-generic/sections.h
+++ b/include/asm-generic/sections.h
@@ -14,4 +14,10 @@ extern char __kprobes_text_start[], __kprobes_text_end[];
 extern char __initdata_begin[], __initdata_end[];
 extern char __start_rodata[], __end_rodata[];
 
+/* function descriptor handling (if any).  Override
+ * in asm/sections.h */
+#ifndef dereference_function_descriptor
+#define dereference_function_descriptor(p) (p)
+#endif
+
 #endif /* _ASM_GENERIC_SECTIONS_H_ */
diff --git a/include/asm-generic/syscall.h b/include/asm-generic/syscall.h
index abcf34c2fdc..ea8087b55ff 100644
--- a/include/asm-generic/syscall.h
+++ b/include/asm-generic/syscall.h
@@ -126,7 +126,7 @@ void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
  * @args:	array of argument values to store
  *
  * Changes @n arguments to the system call starting with the @i'th argument.
- * @n'th argument to @val.  Argument @i gets value @args[0], and so on.
+ * Argument @i gets value @args[0], and so on.
  * An arch inline version is probably optimal when @i and @n are constants.
  *
  * It's only valid to call this when @task is stopped for tracing on
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 6d88a923c94..cb752ba7246 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -333,9 +333,9 @@
 #define BUG_TABLE							\
 	. = ALIGN(8);							\
 	__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) {		\
-		__start___bug_table = .;				\
+		VMLINUX_SYMBOL(__start___bug_table) = .;		\
 		*(__bug_table)						\
-		__stop___bug_table = .;					\
+		VMLINUX_SYMBOL(__stop___bug_table) = .;			\
 	}
 #else
 #define BUG_TABLE
@@ -345,9 +345,9 @@
 #define TRACEDATA							\
 	. = ALIGN(4);							\
 	.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {		\
-	  	__tracedata_start = .;					\
+		VMLINUX_SYMBOL(__tracedata_start) = .;			\
 		*(.tracedata)						\
-	  	__tracedata_end = .;					\
+		VMLINUX_SYMBOL(__tracedata_end) = .;			\
 	}
 #else
 #define TRACEDATA
@@ -362,7 +362,7 @@
 
 #define INITCALLS							\
 	*(.initcallearly.init)						\
-	__early_initcall_end = .;					\
+	VMLINUX_SYMBOL(__early_initcall_end) = .;			\
   	*(.initcall0.init)						\
   	*(.initcall0s.init)						\
   	*(.initcall1.init)						\
@@ -383,9 +383,9 @@
 
 #define PERCPU(align)							\
 	. = ALIGN(align);						\
-	__per_cpu_start = .;						\
+	VMLINUX_SYMBOL(__per_cpu_start) = .;				\
 	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {		\
 		*(.data.percpu)						\
 		*(.data.percpu.shared_aligned)				\
 	}								\
-	__per_cpu_end = .;
+	VMLINUX_SYMBOL(__per_cpu_end) = .;
diff --git a/include/asm-m68k/contregs.h b/include/asm-m68k/contregs.h
index 1e233e7d191..d1ea750bddf 100644
--- a/include/asm-m68k/contregs.h
+++ b/include/asm-m68k/contregs.h
@@ -1,4 +1,53 @@
 #ifndef _M68K_CONTREGS_H
 #define _M68K_CONTREGS_H
-#include <asm-sparc/contregs.h>
+
+/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
+ *              space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+   4=sun4 (as in sun4 sysmaint student book)
+   c=sun4c (according to davem) */
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
+#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
+#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
+#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
+#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
+#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
+#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
+#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
+#define AC_M_CXR      0x0200        /* shv Context Register                  */
+#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
+#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
+#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
+#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
+#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
+#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
+#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
+#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
+#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
+#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
+#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
+#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
+#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
+#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
+#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
+#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
+
 #endif /* _M68K_CONTREGS_H */
diff --git a/include/asm-m68k/fbio.h b/include/asm-m68k/fbio.h
index c17edf8c7bc..b9215a0907d 100644
--- a/include/asm-m68k/fbio.h
+++ b/include/asm-m68k/fbio.h
@@ -1 +1,330 @@
-#include <asm-sparc/fbio.h>
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE           -1
+#define FBTYPE_SUN1BW           0   /* mono */
+#define FBTYPE_SUN1COLOR        1 
+#define FBTYPE_SUN2BW           2 
+#define FBTYPE_SUN2COLOR        3 
+#define FBTYPE_SUN2GP           4 
+#define FBTYPE_SUN5COLOR        5 
+#define FBTYPE_SUN3COLOR        6 
+#define FBTYPE_MEMCOLOR         7 
+#define FBTYPE_SUN4COLOR        8 
+ 
+#define FBTYPE_NOTSUN1          9 
+#define FBTYPE_NOTSUN2          10
+#define FBTYPE_NOTSUN3          11
+ 
+#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
+#define FBTYPE_SUNROP_COLOR     13
+#define FBTYPE_SUNFB_VIDEO      14
+#define FBTYPE_SUNGIFB          15
+#define FBTYPE_SUNGPLAS         16
+#define FBTYPE_SUNGP3           17
+#define FBTYPE_SUNGT            18
+#define FBTYPE_SUNLEO           19      /* zx Leo card */
+#define FBTYPE_MDICOLOR         20      /* cg14 */
+#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR          22
+#define FBTYPE_PCI_IGA1682	23
+#define FBTYPE_P9100COLOR	24
+
+#define FBTYPE_PCI_GENERIC	1000
+#define FBTYPE_PCI_MACH64	1001
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct  fbtype {
+        int     fb_type;        /* fb type, see above */
+        int     fb_height;      /* pixels */
+        int     fb_width;       /* pixels */
+        int     fb_depth;
+        int     fb_cmsize;      /* color map entries */
+        int     fb_size;        /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct  fbcmap {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        unsigned char   __user *red;
+        unsigned char   __user *green;
+        unsigned char   __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC    8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES       4
+ 
+struct fbsattr {
+        int     flags;
+        int     emu_type;	/* -1 if none */
+        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+ 
+struct fbgattr {
+        int     real_type;	/* real frame buffer type */
+        int     owner;		/* unknown */
+        struct fbtype fbtype;	/* real frame buffer fbtype */
+        struct fbsattr sattr;   
+        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap cmap;     /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        char __user *image;     /* cursor image bits */
+        char __user *mask;      /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
+ 
+/* set/get cursor position */
+#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
+ 
+/* get max cursor size */
+#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8		0
+#define FB_WID_SHARED_24	1
+#define FB_WID_DBL_8		2
+#define FB_WID_DBL_24		3
+	__u32	wa_type;
+	__s32	wa_index;	/* Set on return */
+	__u32	wa_count;	
+};
+struct fb_wid_item {
+	__u32	wi_type;
+	__s32	wi_index;
+	__u32	wi_attrs;
+	__u32	wi_values[32];
+};
+struct fb_wid_list {
+	__u32	wl_flags;
+	__u32	wl_count;
+	struct fb_wid_item	*wl_list;
+};
+
+#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL	('F'<<8)
+#define FFB_SYS_INFO		(FFB_IOCTL|80)
+#define FFB_CLUTREAD		(FFB_IOCTL|81)
+#define FFB_CLUTPOST		(FFB_IOCTL|82)
+#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
+#define FFB_GETMONITORID	(FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
+#define FFB_SETSERVER		(FFB_IOCTL|87)
+#define FFB_SETOVCTL		(FFB_IOCTL|88)
+#define FFB_GETOVCTL		(FFB_IOCTL|89)
+#define FFB_GETSAXNUM		(FFB_IOCTL|90)
+#define FFB_FBDEBUG		(FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL          ('M'<<8)
+#define MDI_RESET          (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
+#    define MDI_32_PIX     32
+#    define MDI_16_PIX     16
+#    define MDI_8_PIX      8
+
+struct mdi_cfginfo {
+	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
+        int     mdi_type;       /* FBTYPE name */
+        int     mdi_height;     /* height */
+        int     mdi_width;      /* widht */
+        int     mdi_size;       /* available ram */
+        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
+        int     mdi_pixfreq;    /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+	__u32	clutid;	/* Set on return */
+ 	__u32	flag;
+ 	__u32	index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	char *	red;
+ 	char *	green;
+ 	char *	blue;
+};
+
+struct fb_clut32 {
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	__u32	red;
+ 	__u32	green;
+ 	__u32	blue;
+};
+
+#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC    0x70000000
+#define CG6_TEC    0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC    0x70004000
+#define CG6_THC    0x70005000
+#define CG6_ROM    0x70006000
+#define CG6_RAM    0x70016000
+#define CG6_DHC    0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT   		0x00000000
+#define TCX_RAM24BIT   		0x01000000
+#define TCX_UNK3   		0x10000000
+#define TCX_UNK4   		0x20000000
+#define TCX_CONTROLPLANE   	0x28000000
+#define TCX_UNK6   		0x30000000
+#define TCX_UNK7   		0x38000000
+#define TCX_TEC    		0x70000000
+#define TCX_BTREGS 		0x70002000
+#define TCX_THC    		0x70004000
+#define TCX_DHC    		0x70008000
+#define TCX_ALT	   		0x7000a000
+#define TCX_SYNC   		0x7000e000
+#define TCX_UNK2    		0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS        0       /* registers */
+#define CG14_CURSORREGS  0x1000  /* cursor registers */
+#define CG14_DACREGS     0x2000  /* DAC registers */
+#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
+#define CG14_CLUT1       0x4000  /* Color Look Up Table */
+#define CG14_CLUT2       0x5000  /* Color Look Up Table */
+#define CG14_CLUT3       0x6000  /* Color Look Up Table */
+#define CG14_AUTO	 0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP            0x00000000
+#define LEO_LC_SS0_USR_MAP     0x00800000
+#define LEO_LD_SS0_MAP         0x00801000
+#define LEO_LX_CURSOR_MAP      0x00802000
+#define LEO_SS1_MAP            0x00803000
+#define LEO_LC_SS1_USR_MAP     0x01003000
+#define LEO_LD_SS1_MAP         0x01004000
+#define LEO_UNK_MAP            0x01005000
+#define LEO_LX_KRN_MAP         0x01006000
+#define LEO_LC_SS0_KRN_MAP     0x01007000
+#define LEO_LC_SS1_KRN_MAP     0x01008000
+#define LEO_LD_GBL_MAP         0x01009000
+#define LEO_UNK2_MAP           0x0100a000
+
+#ifdef __KERNEL__
+struct  fbcmap32 {
+	int             index;          /* first element (0 origin) */
+	int             count;
+	u32		red;
+	u32		green;
+	u32		blue;
+};
+
+#define FBIOPUTCMAP32	_IOW('F', 3, struct fbcmap32)
+#define FBIOGETCMAP32	_IOW('F', 4, struct fbcmap32)
+
+struct fbcursor32 {
+	short set;		/* what to set, choose from the list above */
+	short enable;		/* cursor on/off */
+	struct fbcurpos pos;	/* cursor position */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fbcmap32 cmap;	/* color map info */
+	struct fbcurpos size;	/* cursor bit map size */
+	u32	image;		/* cursor image bits */
+	u32	mask;		/* cursor mask bits */
+};
+
+#define FBIOSCURSOR32	_IOW('F', 24, struct fbcursor32)
+#define FBIOGCURSOR32	_IOW('F', 25, struct fbcursor32)
+#endif
+
+#endif /* __LINUX_FBIO_H */
diff --git a/include/asm-m68k/idprom.h b/include/asm-m68k/idprom.h
index 4349eaf3cfe..160616a89e0 100644
--- a/include/asm-m68k/idprom.h
+++ b/include/asm-m68k/idprom.h
@@ -1,6 +1,25 @@
 #ifndef _M68K_IDPROM_H
 #define _M68K_IDPROM_H
-#include <asm-sparc/idprom.h>
+/*
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/types.h>
+
+struct idprom {
+	u8		id_format;	/* Format identifier (always 0x01) */
+	u8		id_machtype;	/* Machine type */
+	u8		id_ethaddr[6];	/* Hardware ethernet address */
+	s32		id_date;	/* Date of manufacture */
+	u32		id_sernum:24;	/* Unique serial number */
+	u8		id_cksum;	/* Checksum - xor of the data bytes */
+	u8		reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
 
 /* Sun3: in control space */
 #define SUN3_IDPROM_BASE	0x00000000
diff --git a/include/asm-m68k/unistd.h b/include/asm-m68k/unistd.h
index e72ba563f10..965abb8bc7f 100644
--- a/include/asm-m68k/unistd.h
+++ b/include/asm-m68k/unistd.h
@@ -325,10 +325,16 @@
 #define __NR_fallocate		320
 #define __NR_timerfd_settime	321
 #define __NR_timerfd_gettime	322
+#define __NR_signalfd4		323
+#define __NR_eventfd2		324
+#define __NR_epoll_create1	325
+#define __NR_dup3		326
+#define __NR_pipe2		327
+#define __NR_inotify_init1	328
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		323
+#define NR_syscalls		329
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h
index d5c0f2fda51..03b1d69b142 100644
--- a/include/asm-mips/cacheflush.h
+++ b/include/asm-mips/cacheflush.h
@@ -63,6 +63,7 @@ static inline void flush_icache_page(struct vm_area_struct *vma,
 }
 
 extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
 
 extern void (*__flush_cache_vmap)(void);
 
diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h
deleted file mode 100644
index 22f67d4a71a..00000000000
--- a/include/asm-mips/gdb-stub.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 Andreas Busse
- * Copyright (C) 2003 Ralf Baechle
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-
-/*
- * important register numbers
- */
-
-#define REG_EPC			37
-#define REG_FP			72
-#define REG_SP			29
-
-/*
- * Stack layout for the GDB exception handler
- * Derived from the stack layout described in asm-mips/stackframe.h
- *
- * The first PTRSIZE*6 bytes are argument save space for C subroutines.
- */
-#define NUMREGS			90
-
-#define GDB_FR_REG0		(PTRSIZE*6)			/* 0 */
-#define GDB_FR_REG1		((GDB_FR_REG0) + LONGSIZE)	/* 1 */
-#define GDB_FR_REG2		((GDB_FR_REG1) + LONGSIZE)	/* 2 */
-#define GDB_FR_REG3		((GDB_FR_REG2) + LONGSIZE)	/* 3 */
-#define GDB_FR_REG4		((GDB_FR_REG3) + LONGSIZE)	/* 4 */
-#define GDB_FR_REG5		((GDB_FR_REG4) + LONGSIZE)	/* 5 */
-#define GDB_FR_REG6		((GDB_FR_REG5) + LONGSIZE)	/* 6 */
-#define GDB_FR_REG7		((GDB_FR_REG6) + LONGSIZE)	/* 7 */
-#define GDB_FR_REG8		((GDB_FR_REG7) + LONGSIZE)	/* 8 */
-#define GDB_FR_REG9	        ((GDB_FR_REG8) + LONGSIZE)	/* 9 */
-#define GDB_FR_REG10		((GDB_FR_REG9) + LONGSIZE)	/* 10 */
-#define GDB_FR_REG11		((GDB_FR_REG10) + LONGSIZE)	/* 11 */
-#define GDB_FR_REG12		((GDB_FR_REG11) + LONGSIZE)	/* 12 */
-#define GDB_FR_REG13		((GDB_FR_REG12) + LONGSIZE)	/* 13 */
-#define GDB_FR_REG14		((GDB_FR_REG13) + LONGSIZE)	/* 14 */
-#define GDB_FR_REG15		((GDB_FR_REG14) + LONGSIZE)	/* 15 */
-#define GDB_FR_REG16		((GDB_FR_REG15) + LONGSIZE)	/* 16 */
-#define GDB_FR_REG17		((GDB_FR_REG16) + LONGSIZE)	/* 17 */
-#define GDB_FR_REG18		((GDB_FR_REG17) + LONGSIZE)	/* 18 */
-#define GDB_FR_REG19		((GDB_FR_REG18) + LONGSIZE)	/* 19 */
-#define GDB_FR_REG20		((GDB_FR_REG19) + LONGSIZE)	/* 20 */
-#define GDB_FR_REG21		((GDB_FR_REG20) + LONGSIZE)	/* 21 */
-#define GDB_FR_REG22		((GDB_FR_REG21) + LONGSIZE)	/* 22 */
-#define GDB_FR_REG23		((GDB_FR_REG22) + LONGSIZE)	/* 23 */
-#define GDB_FR_REG24		((GDB_FR_REG23) + LONGSIZE)	/* 24 */
-#define GDB_FR_REG25		((GDB_FR_REG24) + LONGSIZE)	/* 25 */
-#define GDB_FR_REG26		((GDB_FR_REG25) + LONGSIZE)	/* 26 */
-#define GDB_FR_REG27		((GDB_FR_REG26) + LONGSIZE)	/* 27 */
-#define GDB_FR_REG28		((GDB_FR_REG27) + LONGSIZE)	/* 28 */
-#define GDB_FR_REG29		((GDB_FR_REG28) + LONGSIZE)	/* 29 */
-#define GDB_FR_REG30		((GDB_FR_REG29) + LONGSIZE)	/* 30 */
-#define GDB_FR_REG31		((GDB_FR_REG30) + LONGSIZE)	/* 31 */
-
-/*
- * Saved special registers
- */
-#define GDB_FR_STATUS		((GDB_FR_REG31) + LONGSIZE)	/* 32 */
-#define GDB_FR_LO		((GDB_FR_STATUS) + LONGSIZE)	/* 33 */
-#define GDB_FR_HI		((GDB_FR_LO) + LONGSIZE)	/* 34 */
-#define GDB_FR_BADVADDR		((GDB_FR_HI) + LONGSIZE)	/* 35 */
-#define GDB_FR_CAUSE		((GDB_FR_BADVADDR) + LONGSIZE)	/* 36 */
-#define GDB_FR_EPC		((GDB_FR_CAUSE) + LONGSIZE)	/* 37 */
-
-/*
- * Saved floating point registers
- */
-#define GDB_FR_FPR0		((GDB_FR_EPC) + LONGSIZE)	/* 38 */
-#define GDB_FR_FPR1		((GDB_FR_FPR0) + LONGSIZE)	/* 39 */
-#define GDB_FR_FPR2		((GDB_FR_FPR1) + LONGSIZE)	/* 40 */
-#define GDB_FR_FPR3		((GDB_FR_FPR2) + LONGSIZE)	/* 41 */
-#define GDB_FR_FPR4		((GDB_FR_FPR3) + LONGSIZE)	/* 42 */
-#define GDB_FR_FPR5		((GDB_FR_FPR4) + LONGSIZE)	/* 43 */
-#define GDB_FR_FPR6		((GDB_FR_FPR5) + LONGSIZE)	/* 44 */
-#define GDB_FR_FPR7		((GDB_FR_FPR6) + LONGSIZE)	/* 45 */
-#define GDB_FR_FPR8		((GDB_FR_FPR7) + LONGSIZE)	/* 46 */
-#define GDB_FR_FPR9		((GDB_FR_FPR8) + LONGSIZE)	/* 47 */
-#define GDB_FR_FPR10		((GDB_FR_FPR9) + LONGSIZE)	/* 48 */
-#define GDB_FR_FPR11		((GDB_FR_FPR10) + LONGSIZE)	/* 49 */
-#define GDB_FR_FPR12		((GDB_FR_FPR11) + LONGSIZE)	/* 50 */
-#define GDB_FR_FPR13		((GDB_FR_FPR12) + LONGSIZE)	/* 51 */
-#define GDB_FR_FPR14		((GDB_FR_FPR13) + LONGSIZE)	/* 52 */
-#define GDB_FR_FPR15		((GDB_FR_FPR14) + LONGSIZE)	/* 53 */
-#define GDB_FR_FPR16		((GDB_FR_FPR15) + LONGSIZE)	/* 54 */
-#define GDB_FR_FPR17		((GDB_FR_FPR16) + LONGSIZE)	/* 55 */
-#define GDB_FR_FPR18		((GDB_FR_FPR17) + LONGSIZE)	/* 56 */
-#define GDB_FR_FPR19		((GDB_FR_FPR18) + LONGSIZE)	/* 57 */
-#define GDB_FR_FPR20		((GDB_FR_FPR19) + LONGSIZE)	/* 58 */
-#define GDB_FR_FPR21		((GDB_FR_FPR20) + LONGSIZE)	/* 59 */
-#define GDB_FR_FPR22		((GDB_FR_FPR21) + LONGSIZE)	/* 60 */
-#define GDB_FR_FPR23		((GDB_FR_FPR22) + LONGSIZE)	/* 61 */
-#define GDB_FR_FPR24		((GDB_FR_FPR23) + LONGSIZE)	/* 62 */
-#define GDB_FR_FPR25		((GDB_FR_FPR24) + LONGSIZE)	/* 63 */
-#define GDB_FR_FPR26		((GDB_FR_FPR25) + LONGSIZE)	/* 64 */
-#define GDB_FR_FPR27		((GDB_FR_FPR26) + LONGSIZE)	/* 65 */
-#define GDB_FR_FPR28		((GDB_FR_FPR27) + LONGSIZE)	/* 66 */
-#define GDB_FR_FPR29		((GDB_FR_FPR28) + LONGSIZE)	/* 67 */
-#define GDB_FR_FPR30		((GDB_FR_FPR29) + LONGSIZE)	/* 68 */
-#define GDB_FR_FPR31		((GDB_FR_FPR30) + LONGSIZE)	/* 69 */
-
-#define GDB_FR_FSR		((GDB_FR_FPR31) + LONGSIZE)	/* 70 */
-#define GDB_FR_FIR		((GDB_FR_FSR) + LONGSIZE)	/* 71 */
-#define GDB_FR_FRP		((GDB_FR_FIR) + LONGSIZE)	/* 72 */
-
-#define GDB_FR_DUMMY		((GDB_FR_FRP) + LONGSIZE)	/* 73, unused ??? */
-
-/*
- * Again, CP0 registers
- */
-#define GDB_FR_CP0_INDEX	((GDB_FR_DUMMY) + LONGSIZE)	/* 74 */
-#define GDB_FR_CP0_RANDOM	((GDB_FR_CP0_INDEX) + LONGSIZE)	/* 75 */
-#define GDB_FR_CP0_ENTRYLO0	((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */
-#define GDB_FR_CP0_ENTRYLO1	((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */
-#define GDB_FR_CP0_CONTEXT	((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */
-#define GDB_FR_CP0_PAGEMASK	((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */
-#define GDB_FR_CP0_WIRED	((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */
-#define GDB_FR_CP0_REG7		((GDB_FR_CP0_WIRED) + LONGSIZE)	/* 81 */
-#define GDB_FR_CP0_REG8		((GDB_FR_CP0_REG7) + LONGSIZE)	/* 82 */
-#define GDB_FR_CP0_REG9		((GDB_FR_CP0_REG8) + LONGSIZE)	/* 83 */
-#define GDB_FR_CP0_ENTRYHI	((GDB_FR_CP0_REG9) + LONGSIZE)	/* 84 */
-#define GDB_FR_CP0_REG11	((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */
-#define GDB_FR_CP0_REG12	((GDB_FR_CP0_REG11) + LONGSIZE)	/* 86 */
-#define GDB_FR_CP0_REG13	((GDB_FR_CP0_REG12) + LONGSIZE)	/* 87 */
-#define GDB_FR_CP0_REG14	((GDB_FR_CP0_REG13) + LONGSIZE)	/* 88 */
-#define GDB_FR_CP0_PRID		((GDB_FR_CP0_REG14) + LONGSIZE)	/* 89 */
-
-#define GDB_FR_SIZE		((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
-	/*
-	 * Pad bytes for argument save space on the stack
-	 * 24/48 Bytes for 32/64 bit code
-	 */
-	unsigned long pad0[6];
-
-	/*
-	 * saved main processor registers
-	 */
-	long	 reg0,  reg1,  reg2,  reg3,  reg4,  reg5,  reg6,  reg7;
-	long	 reg8,  reg9, reg10, reg11, reg12, reg13, reg14, reg15;
-	long	reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23;
-	long	reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31;
-
-	/*
-	 * Saved special registers
-	 */
-	long	cp0_status;
-	long	lo;
-	long	hi;
-	long	cp0_badvaddr;
-	long	cp0_cause;
-	long	cp0_epc;
-
-	/*
-	 * Saved floating point registers
-	 */
-	long	fpr0,  fpr1,  fpr2,  fpr3,  fpr4,  fpr5,  fpr6,  fpr7;
-	long	fpr8,  fpr9,  fpr10, fpr11, fpr12, fpr13, fpr14, fpr15;
-	long	fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23;
-	long	fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31;
-
-	long	cp1_fsr;
-	long	cp1_fir;
-
-	/*
-	 * Frame pointer
-	 */
-	long	frame_ptr;
-	long    dummy;		/* unused */
-
-	/*
-	 * saved cp0 registers
-	 */
-	long	cp0_index;
-	long	cp0_random;
-	long	cp0_entrylo0;
-	long	cp0_entrylo1;
-	long	cp0_context;
-	long	cp0_pagemask;
-	long	cp0_wired;
-	long	cp0_reg7;
-	long	cp0_reg8;
-	long	cp0_reg9;
-	long	cp0_entryhi;
-	long	cp0_reg11;
-	long	cp0_reg12;
-	long	cp0_reg13;
-	long	cp0_reg14;
-	long	cp0_prid;
-};
-
-/*
- * Prototypes
- */
-
-extern int kgdb_enabled;
-void set_debug_traps(void);
-void set_async_breakpoint(unsigned long *epc);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */
diff --git a/include/asm-mips/kdebug.h b/include/asm-mips/kdebug.h
index 6ece1b03766..5bf62aafc89 100644
--- a/include/asm-mips/kdebug.h
+++ b/include/asm-mips/kdebug.h
@@ -1 +1,13 @@
-#include <asm-generic/kdebug.h>
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_FP,
+	DIE_TRAP,
+	DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/include/asm-mips/kexec.h b/include/asm-mips/kexec.h
index cdbab43b7d3..4314892aaeb 100644
--- a/include/asm-mips/kexec.h
+++ b/include/asm-mips/kexec.h
@@ -16,7 +16,7 @@
  /* Maximum address we can use for the control code buffer */
 #define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
 
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
 
 /* The native architecture */
 #define KEXEC_ARCH KEXEC_ARCH_MIPS
diff --git a/include/asm-mips/kgdb.h b/include/asm-mips/kgdb.h
new file mode 100644
index 00000000000..48223b09396
--- /dev/null
+++ b/include/asm-mips/kgdb.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX			2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES		(90*sizeof(u32))
+#define NUMCRITREGBYTES		(12*sizeof(u32))
+#else
+#define NUMREGBYTES		(90*sizeof(u64))
+#define NUMCRITREGBYTES		(12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE	4
+#define CACHE_FLUSH_IS_SAFE	0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif				/* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index c205875d7f3..5510c53b7fe 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -174,4 +174,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 
 extern int pci_probe_only;
 
+extern char * (*pcibios_plat_setup)(char *str);
+
 #endif /* _ASM_PCI_H */
diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h
index cbae37ec3d8..5b1ccf901c6 100644
--- a/include/asm-mips/txx9/generic.h
+++ b/include/asm-mips/txx9/generic.h
@@ -44,5 +44,19 @@ extern struct txx9_board_vec *txx9_board_vec;
 extern int (*txx9_irq_dispatch)(int pending);
 void prom_init_cmdline(void);
 char *prom_getcmdline(void);
+void txx9_wdt_init(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+		   unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
 
 #endif /* __ASM_TXX9_GENERIC_H */
diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h
index d6eb1b6a54e..a409c446bf1 100644
--- a/include/asm-mips/txx9/jmr3927.h
+++ b/include/asm-mips/txx9/jmr3927.h
@@ -149,8 +149,6 @@
 
 /* Clocks */
 #define JMR3927_CORECLK	132710400	/* 132.7MHz */
-#define JMR3927_GBUSCLK	(JMR3927_CORECLK / 2)	/* 66.35MHz */
-#define JMR3927_IMCLK	(JMR3927_CORECLK / 4)	/* 33.17MHz */
 
 /*
  * TX3927 Pin Configuration:
diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h
index d89a45091e2..3d32529060a 100644
--- a/include/asm-mips/txx9/pci.h
+++ b/include/asm-mips/txx9/pci.h
@@ -33,4 +33,7 @@ enum txx9_pci_err_action {
 };
 extern enum txx9_pci_err_action txx9_pci_err_action;
 
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
 #endif /* __ASM_TXX9_PCI_H */
diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h
index 9375e4fc228..02e161d0755 100644
--- a/include/asm-mips/txx9/smsc_fdc37m81x.h
+++ b/include/asm-mips/txx9/smsc_fdc37m81x.h
@@ -56,7 +56,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-unsigned long __init smsc_fdc37m81x_init(unsigned long port);
+unsigned long smsc_fdc37m81x_init(unsigned long port);
 
 void smsc_fdc37m81x_config_beg(void);
 
diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h
index ea79e1b16e7..587deb9592d 100644
--- a/include/asm-mips/txx9/tx3927.h
+++ b/include/asm-mips/txx9/tx3927.h
@@ -8,9 +8,8 @@
 #ifndef __ASM_TXX9_TX3927_H
 #define __ASM_TXX9_TX3927_H
 
-#include <asm/txx9/txx927.h>
-
 #define TX3927_REG_BASE	0xfffe0000UL
+#define TX3927_REG_SIZE	0x00010000
 #define TX3927_SDRAMC_REG	(TX3927_REG_BASE + 0x8000)
 #define TX3927_ROMC_REG		(TX3927_REG_BASE + 0x9000)
 #define TX3927_DMA_REG		(TX3927_REG_BASE + 0xb000)
@@ -236,11 +235,17 @@ struct tx3927_ccfg_reg {
 /* see PCI_STATUS_XXX in linux/pci.h */
 #define PCI_STATUS_NEW_CAP	0x0010
 
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL	0x00001600
+
 /* bits for TC */
 #define TX3927_PCIC_TC_OF16E	0x00000020
 #define TX3927_PCIC_TC_IF8E	0x00000010
 #define TX3927_PCIC_TC_OF8E	0x00000008
 
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL	0x0003ffff
+
 /* bits for IOBA/MBA */
 /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
 
@@ -313,12 +318,22 @@ struct tx3927_ccfg_reg {
 #define tx3927_dmaptr		((struct tx3927_dma_reg *)TX3927_DMA_REG)
 #define tx3927_pcicptr		((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
 #define tx3927_ccfgptr		((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
-#define tx3927_tmrptr(ch)	((struct txx927_tmr_reg *)TX3927_TMR_REG(ch))
 #define tx3927_sioptr(ch)	((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
 #define tx3927_pioptr		((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
 
+#define TX3927_REV_PCODE()	(tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch)	(tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch)	\
+	(0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
 struct pci_controller;
-void __init tx3927_pcic_setup(struct pci_controller *channel,
-			      unsigned long sdram_size, int extarb);
+void tx3927_pcic_setup(struct pci_controller *channel,
+		       unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX3927_H */
diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h
index ceb4b79ff4e..195f6515db9 100644
--- a/include/asm-mips/txx9/tx4927.h
+++ b/include/asm-mips/txx9/tx4927.h
@@ -243,12 +243,13 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new)
 }
 
 unsigned int tx4927_get_mem_size(void);
-void tx4927_wdr_init(void);
+void tx4927_wdt_init(void);
 void tx4927_setup(void);
 void tx4927_time_init(unsigned int tmrnr);
-void tx4927_setup_serial(void);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
 int tx4927_report_pciclk(void);
 int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
 void tx4927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX4927_H */
diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h
index d61c3d09c4a..c470b8a5fe5 100644
--- a/include/asm-mips/txx9/tx4927pcic.h
+++ b/include/asm-mips/txx9/tx4927pcic.h
@@ -10,6 +10,7 @@
 #define __ASM_TXX9_TX4927PCIC_H
 
 #include <linux/pci.h>
+#include <linux/irqreturn.h>
 
 struct tx4927_pcic_reg {
 	u32 pciid;
@@ -192,8 +193,11 @@ struct tx4927_pcic_reg {
 
 struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
 	struct pci_controller *channel);
-void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
-			      struct pci_controller *channel, int extarb);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+		       struct pci_controller *channel, int extarb);
 void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
 
 #endif /* __ASM_TXX9_TX4927PCIC_H */
diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h
index 1ed969d381d..8175d4ccbc3 100644
--- a/include/asm-mips/txx9/tx4938.h
+++ b/include/asm-mips/txx9/tx4938.h
@@ -276,15 +276,18 @@ struct tx4938_ccfg_reg {
 #define TX4938_EBUSC_SIZE(ch)	TX4927_EBUSC_SIZE(ch)
 
 #define tx4938_get_mem_size() tx4927_get_mem_size()
-void tx4938_wdr_init(void);
+void tx4938_wdt_init(void);
 void tx4938_setup(void);
 void tx4938_time_init(unsigned int tmrnr);
-void tx4938_setup_serial(void);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
 int tx4938_report_pciclk(void);
 void tx4938_report_pci1clk(void);
 int tx4938_pciclk66_setup(void);
 struct pci_dev;
 int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
 void tx4938_irq_init(void);
 
 #endif
diff --git a/include/asm-mips/txx9/txx927.h b/include/asm-mips/txx9/txx927.h
deleted file mode 100644
index 97dd7ad1a89..00000000000
--- a/include/asm-mips/txx9/txx927.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Common definitions for TX3927/TX4927
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Toshiba Corporation
- */
-#ifndef __ASM_TXX9_TXX927_H
-#define __ASM_TXX9_TXX927_H
-
-struct txx927_sio_reg {
-	volatile unsigned long lcr;
-	volatile unsigned long dicr;
-	volatile unsigned long disr;
-	volatile unsigned long cisr;
-	volatile unsigned long fcr;
-	volatile unsigned long flcr;
-	volatile unsigned long bgr;
-	volatile unsigned long tfifo;
-	volatile unsigned long rfifo;
-};
-
-/*
- * SIO
- */
-/* SILCR : Line Control */
-#define TXx927_SILCR_SCS_MASK	0x00000060
-#define TXx927_SILCR_SCS_IMCLK	0x00000000
-#define TXx927_SILCR_SCS_IMCLK_BG	0x00000020
-#define TXx927_SILCR_SCS_SCLK	0x00000040
-#define TXx927_SILCR_SCS_SCLK_BG	0x00000060
-#define TXx927_SILCR_UEPS	0x00000010
-#define TXx927_SILCR_UPEN	0x00000008
-#define TXx927_SILCR_USBL_MASK	0x00000004
-#define TXx927_SILCR_USBL_1BIT	0x00000004
-#define TXx927_SILCR_USBL_2BIT	0x00000000
-#define TXx927_SILCR_UMODE_MASK	0x00000003
-#define TXx927_SILCR_UMODE_8BIT	0x00000000
-#define TXx927_SILCR_UMODE_7BIT	0x00000001
-
-/* SIDICR : DMA/Int. Control */
-#define TXx927_SIDICR_TDE	0x00008000
-#define TXx927_SIDICR_RDE	0x00004000
-#define TXx927_SIDICR_TIE	0x00002000
-#define TXx927_SIDICR_RIE	0x00001000
-#define TXx927_SIDICR_SPIE	0x00000800
-#define TXx927_SIDICR_CTSAC	0x00000600
-#define TXx927_SIDICR_STIE_MASK	0x0000003f
-#define TXx927_SIDICR_STIE_OERS		0x00000020
-#define TXx927_SIDICR_STIE_CTSS		0x00000010
-#define TXx927_SIDICR_STIE_RBRKD	0x00000008
-#define TXx927_SIDICR_STIE_TRDY		0x00000004
-#define TXx927_SIDICR_STIE_TXALS	0x00000002
-#define TXx927_SIDICR_STIE_UBRKD	0x00000001
-
-/* SIDISR : DMA/Int. Status */
-#define TXx927_SIDISR_UBRK	0x00008000
-#define TXx927_SIDISR_UVALID	0x00004000
-#define TXx927_SIDISR_UFER	0x00002000
-#define TXx927_SIDISR_UPER	0x00001000
-#define TXx927_SIDISR_UOER	0x00000800
-#define TXx927_SIDISR_ERI	0x00000400
-#define TXx927_SIDISR_TOUT	0x00000200
-#define TXx927_SIDISR_TDIS	0x00000100
-#define TXx927_SIDISR_RDIS	0x00000080
-#define TXx927_SIDISR_STIS	0x00000040
-#define TXx927_SIDISR_RFDN_MASK	0x0000001f
-
-/* SICISR : Change Int. Status */
-#define TXx927_SICISR_OERS	0x00000020
-#define TXx927_SICISR_CTSS	0x00000010
-#define TXx927_SICISR_RBRKD	0x00000008
-#define TXx927_SICISR_TRDY	0x00000004
-#define TXx927_SICISR_TXALS	0x00000002
-#define TXx927_SICISR_UBRKD	0x00000001
-
-/* SIFCR : FIFO Control */
-#define TXx927_SIFCR_SWRST	0x00008000
-#define TXx927_SIFCR_RDIL_MASK	0x00000180
-#define TXx927_SIFCR_RDIL_1	0x00000000
-#define TXx927_SIFCR_RDIL_4	0x00000080
-#define TXx927_SIFCR_RDIL_8	0x00000100
-#define TXx927_SIFCR_RDIL_12	0x00000180
-#define TXx927_SIFCR_RDIL_MAX	0x00000180
-#define TXx927_SIFCR_TDIL_MASK	0x00000018
-#define TXx927_SIFCR_TDIL_MASK	0x00000018
-#define TXx927_SIFCR_TDIL_1	0x00000000
-#define TXx927_SIFCR_TDIL_4	0x00000001
-#define TXx927_SIFCR_TDIL_8	0x00000010
-#define TXx927_SIFCR_TDIL_MAX	0x00000010
-#define TXx927_SIFCR_TFRST	0x00000004
-#define TXx927_SIFCR_RFRST	0x00000002
-#define TXx927_SIFCR_FRSTE	0x00000001
-#define TXx927_SIO_TX_FIFO	8
-#define TXx927_SIO_RX_FIFO	16
-
-/* SIFLCR : Flow Control */
-#define TXx927_SIFLCR_RCS	0x00001000
-#define TXx927_SIFLCR_TES	0x00000800
-#define TXx927_SIFLCR_RTSSC	0x00000200
-#define TXx927_SIFLCR_RSDE	0x00000100
-#define TXx927_SIFLCR_TSDE	0x00000080
-#define TXx927_SIFLCR_RTSTL_MASK	0x0000001e
-#define TXx927_SIFLCR_RTSTL_MAX	0x0000001e
-#define TXx927_SIFLCR_TBRK	0x00000001
-
-/* SIBGR : Baudrate Control */
-#define TXx927_SIBGR_BCLK_MASK	0x00000300
-#define TXx927_SIBGR_BCLK_T0	0x00000000
-#define TXx927_SIBGR_BCLK_T2	0x00000100
-#define TXx927_SIBGR_BCLK_T4	0x00000200
-#define TXx927_SIBGR_BCLK_T6	0x00000300
-#define TXx927_SIBGR_BRD_MASK	0x000000ff
-
-/*
- * PIO
- */
-
-#endif /* __ASM_TXX9_TXX927_H */
diff --git a/include/asm-mips/txx9irq.h b/include/asm-mips/txx9irq.h
index 1c439e51b87..5620879be37 100644
--- a/include/asm-mips/txx9irq.h
+++ b/include/asm-mips/txx9irq.h
@@ -14,8 +14,12 @@
 #ifdef CONFIG_IRQ_CPU
 #define TXX9_IRQ_BASE	(MIPS_CPU_IRQ_BASE + 8)
 #else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE	(I8259A_IRQ_BASE + 16)
+#else
 #define TXX9_IRQ_BASE	0
 #endif
+#endif
 
 #ifdef CONFIG_CPU_TX39XX
 #define TXx9_MAX_IR 16
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index 4964c82f85f..a73e1531e15 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -344,16 +344,22 @@
 #define __NR_timerfd_create		(__NR_Linux + 321)
 #define __NR_timerfd_gettime		(__NR_Linux + 322)
 #define __NR_timerfd_settime		(__NR_Linux + 323)
+#define __NR_signalfd4			(__NR_Linux + 324)
+#define __NR_eventfd2			(__NR_Linux + 325)
+#define __NR_epoll_create1		(__NR_Linux + 326)
+#define __NR_dup3			(__NR_Linux + 327)
+#define __NR_pipe2			(__NR_Linux + 328)
+#define __NR_inotify_init1		(__NR_Linux + 329)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		323
+#define __NR_Linux_syscalls		329
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		323
+#define __NR_O32_Linux_syscalls		329
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -644,16 +650,22 @@
 #define __NR_timerfd_create		(__NR_Linux + 280)
 #define __NR_timerfd_gettime		(__NR_Linux + 281)
 #define __NR_timerfd_settime		(__NR_Linux + 282)
+#define __NR_signalfd4			(__NR_Linux + 283)
+#define __NR_eventfd2			(__NR_Linux + 284)
+#define __NR_epoll_create1		(__NR_Linux + 285)
+#define __NR_dup3			(__NR_Linux + 286)
+#define __NR_pipe2			(__NR_Linux + 287)
+#define __NR_inotify_init1		(__NR_Linux + 288)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		282
+#define __NR_Linux_syscalls		288
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		282
+#define __NR_64_Linux_syscalls		288
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -948,16 +960,22 @@
 #define __NR_timerfd_create		(__NR_Linux + 284)
 #define __NR_timerfd_gettime		(__NR_Linux + 285)
 #define __NR_timerfd_settime		(__NR_Linux + 286)
+#define __NR_signalfd4			(__NR_Linux + 287)
+#define __NR_eventfd2			(__NR_Linux + 288)
+#define __NR_epoll_create1		(__NR_Linux + 289)
+#define __NR_dup3			(__NR_Linux + 290)
+#define __NR_pipe2			(__NR_Linux + 291)
+#define __NR_inotify_init1		(__NR_Linux + 292)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		286
+#define __NR_Linux_syscalls		292
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		286
+#define __NR_N32_Linux_syscalls		292
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-mn10300/io.h b/include/asm-mn10300/io.h
index b8b6dc87825..c1a4119e649 100644
--- a/include/asm-mn10300/io.h
+++ b/include/asm-mn10300/io.h
@@ -259,6 +259,8 @@ static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
 	return (void *) (offset | 0x20000000);
 }
 
+#define ioremap_wc ioremap_nocache
+
 static inline void iounmap(void *addr)
 {
 }
diff --git a/include/asm-mn10300/unistd.h b/include/asm-mn10300/unistd.h
index 3721aa9e195..543a4f98695 100644
--- a/include/asm-mn10300/unistd.h
+++ b/include/asm-mn10300/unistd.h
@@ -338,6 +338,12 @@
 #define __NR_fallocate		325
 #define __NR_timerfd_settime	326
 #define __NR_timerfd_gettime	327
+#define __NR_signalfd4		328
+#define __NR_eventfd2		329
+#define __NR_epoll_create1	330
+#define __NR_dup3		331
+#define __NR_pipe2		332
+#define __NR_inotify_init1	333
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-parisc/sections.h b/include/asm-parisc/sections.h
index fdd43ec42ec..9d13c3507ad 100644
--- a/include/asm-parisc/sections.h
+++ b/include/asm-parisc/sections.h
@@ -4,4 +4,9 @@
 /* nothing to see, move along */
 #include <asm-generic/sections.h>
 
+#ifdef CONFIG_64BIT
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+#endif
+
 #endif
diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h
deleted file mode 100644
index 1aaf27be874..00000000000
--- a/include/asm-powerpc/ide.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *  Copyright (C) 1994-1996 Linus Torvalds & authors
- *
- *  This file contains the powerpc architecture specific IDE code.
- */
-#ifndef _ASM_POWERPC_IDE_H
-#define _ASM_POWERPC_IDE_H
-
-#ifdef __KERNEL__
-
-#ifndef __powerpc64__
-#include <linux/sched.h>
-#include <asm/mpc8xx.h>
-#endif
-#include <asm/io.h>
-
-#define __ide_mm_insw(p, a, c)	readsw((void __iomem *)(p), (a), (c))
-#define __ide_mm_insl(p, a, c)	readsl((void __iomem *)(p), (a), (c))
-#define __ide_mm_outsw(p, a, c)	writesw((void __iomem *)(p), (a), (c))
-#define __ide_mm_outsl(p, a, c)	writesl((void __iomem *)(p), (a), (c))
-
-#ifndef  __powerpc64__
-#include <linux/hdreg.h>
-#include <linux/ioport.h>
-
-/* FIXME: use ide_platform host driver */
-static __inline__ int ide_default_irq(unsigned long base)
-{
-#ifdef CONFIG_PPLUS
-	switch (base) {
-	case 0x1f0:	return 14;
-	case 0x170:	return 15;
-	}
-#endif
-	return 0;
-}
-
-/* FIXME: use ide_platform host driver */
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-#ifdef CONFIG_PPLUS
-	switch (index) {
-	case 0:		return 0x1f0;
-	case 1:		return 0x170;
-	}
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
-#define IDE_ARCH_ACK_INTR  1
-#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
-#endif
-
-#endif /* __powerpc64__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_IDE_H */
diff --git a/include/asm-sh/a.out.h b/include/asm-sh/a.out.h
deleted file mode 100644
index 1f93130e179..00000000000
--- a/include/asm-sh/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_SH_A_OUT_H
-#define __ASM_SH_A_OUT_H
-
-struct exec
-{
-  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
-  unsigned a_text;		/* length of text, in bytes */
-  unsigned a_data;		/* length of data, in bytes */
-  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-  unsigned a_syms;		/* length of symbol table data in file, in bytes */
-  unsigned a_entry;		/* start address */
-  unsigned a_trsize;		/* length of relocation info for text, in bytes */
-  unsigned a_drsize;		/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif /* __ASM_SH_A_OUT_H */
diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h
deleted file mode 100644
index fa3186c7335..00000000000
--- a/include/asm-sh/cpu-sh2a/cacheflush.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/cacheflush.h>
diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h
deleted file mode 100644
index 0d5ad85c1de..00000000000
--- a/include/asm-sh/cpu-sh2a/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h
deleted file mode 100644
index cd2387f7db9..00000000000
--- a/include/asm-sh/cpu-sh2a/mmu_context.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/mmu_context.h>
diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h
deleted file mode 100644
index fee504adf11..00000000000
--- a/include/asm-sh/cpu-sh2a/timer.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/timer.h>
diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h
deleted file mode 100644
index cf28062b96a..00000000000
--- a/include/asm-sh/cpu-sh2a/ubc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/ubc.h>
diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h
deleted file mode 100644
index c1b3e248847..00000000000
--- a/include/asm-sh/cpu-sh2a/watchdog.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h
deleted file mode 100644
index 0f94726c7d6..00000000000
--- a/include/asm-sh/cpu-sh3/addrspace.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-3 CPUs.
- */
-#ifndef __ASM_CPU_SH3_ADDRSPACE_H
-#define __ASM_CPU_SH3_ADDRSPACE_H
-
-#define P0SEG		0x00000000
-#define P1SEG		0x80000000
-#define P2SEG		0xa0000000
-#define P3SEG		0xc0000000
-#define P4SEG		0xe0000000
-
-#endif /* __ASM_CPU_SH3_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h
deleted file mode 100644
index 319404aaee3..00000000000
--- a/include/asm-sh/cpu-sh3/rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_SH_CPU_SH3_RTC_H
-#define __ASM_SH_CPU_SH3_RTC_H
-
-#define rtc_reg_size		sizeof(u16)
-#define RTC_BIT_INVERTED	0	/* No bug on SH7708, SH7709A */
-#define RTC_DEF_CAPABILITIES	0UL
-
-#endif /* __ASM_SH_CPU_SH3_RTC_H */
diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/include/asm-sh/cpu-sh3/sigcontext.h
deleted file mode 100644
index 17310dc03dc..00000000000
--- a/include/asm-sh/cpu-sh3/sigcontext.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_CPU_SH3_SIGCONTEXT_H
-#define __ASM_CPU_SH3_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long	oldmask;
-
-	/* CPU registers */
-	unsigned long sc_regs[16];
-	unsigned long sc_pc;
-	unsigned long sc_pr;
-	unsigned long sc_sr;
-	unsigned long sc_gbr;
-	unsigned long sc_mach;
-	unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh5/timer.h b/include/asm-sh/cpu-sh5/timer.h
deleted file mode 100644
index 88da9b341a3..00000000000
--- a/include/asm-sh/cpu-sh5/timer.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_TIMER_H
-#define __ASM_SH_CPU_SH5_TIMER_H
-
-#endif /* __ASM_SH_CPU_SH5_TIMER_H */
diff --git a/include/asm-x86/amd_iommu_types.h b/include/asm-x86/amd_iommu_types.h
index 22aa58ca199..dcc81206739 100644
--- a/include/asm-x86/amd_iommu_types.h
+++ b/include/asm-x86/amd_iommu_types.h
@@ -31,9 +31,6 @@
 #define ALIAS_TABLE_ENTRY_SIZE		2
 #define RLOOKUP_TABLE_ENTRY_SIZE	(sizeof(void *))
 
-/* helper macros */
-#define LOW_U32(x) ((x) & ((1ULL << 32)-1))
-
 /* Length of the MMIO region for the AMD IOMMU */
 #define MMIO_REGION_LENGTH       0x4000
 
@@ -69,6 +66,9 @@
 #define MMIO_EVT_TAIL_OFFSET	0x2018
 #define MMIO_STATUS_OFFSET	0x2020
 
+/* MMIO status bits */
+#define MMIO_STATUS_COM_WAIT_INT_MASK	0x04
+
 /* feature control bits */
 #define CONTROL_IOMMU_EN        0x00ULL
 #define CONTROL_HT_TUN_EN       0x01ULL
@@ -89,6 +89,7 @@
 #define CMD_INV_IOMMU_PAGES     0x03
 
 #define CMD_COMPL_WAIT_STORE_MASK	0x01
+#define CMD_COMPL_WAIT_INT_MASK		0x02
 #define CMD_INV_IOMMU_PAGES_SIZE_MASK	0x01
 #define CMD_INV_IOMMU_PAGES_PDE_MASK	0x02
 
@@ -99,6 +100,7 @@
 #define DEV_ENTRY_TRANSLATION   0x01
 #define DEV_ENTRY_IR            0x3d
 #define DEV_ENTRY_IW            0x3e
+#define DEV_ENTRY_NO_PAGE_FAULT	0x62
 #define DEV_ENTRY_EX            0x67
 #define DEV_ENTRY_SYSMGT1       0x68
 #define DEV_ENTRY_SYSMGT2       0x69
diff --git a/include/asm-x86/atomic_64.h b/include/asm-x86/atomic_64.h
index a0095191c02..91c7d03e65b 100644
--- a/include/asm-x86/atomic_64.h
+++ b/include/asm-x86/atomic_64.h
@@ -228,7 +228,7 @@ static inline void atomic64_add(long i, atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "addq %1,%0"
 		     : "=m" (v->counter)
-		     : "ir" (i), "m" (v->counter));
+		     : "er" (i), "m" (v->counter));
 }
 
 /**
@@ -242,7 +242,7 @@ static inline void atomic64_sub(long i, atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "subq %1,%0"
 		     : "=m" (v->counter)
-		     : "ir" (i), "m" (v->counter));
+		     : "er" (i), "m" (v->counter));
 }
 
 /**
@@ -260,7 +260,7 @@ static inline int atomic64_sub_and_test(long i, atomic64_t *v)
 
 	asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
 		     : "=m" (v->counter), "=qm" (c)
-		     : "ir" (i), "m" (v->counter) : "memory");
+		     : "er" (i), "m" (v->counter) : "memory");
 	return c;
 }
 
@@ -341,7 +341,7 @@ static inline int atomic64_add_negative(long i, atomic64_t *v)
 
 	asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
 		     : "=m" (v->counter), "=qm" (c)
-		     : "ir" (i), "m" (v->counter) : "memory");
+		     : "er" (i), "m" (v->counter) : "memory");
 	return c;
 }
 
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 2f5a792b0ac..9489283a4bc 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -72,14 +72,15 @@
 #define X86_FEATURE_UP		(3*32+ 9) /* smp kernel running on up */
 #define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */
 #define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
-#define X86_FEATURE_PEBS	(3*32+12)  /* Precise-Event Based Sampling */
-#define X86_FEATURE_BTS		(3*32+13)  /* Branch Trace Store */
-#define X86_FEATURE_SYSCALL32	(3*32+14)  /* syscall in ia32 userspace */
-#define X86_FEATURE_SYSENTER32	(3*32+15)  /* sysenter in ia32 userspace */
+#define X86_FEATURE_PEBS	(3*32+12) /* Precise-Event Based Sampling */
+#define X86_FEATURE_BTS		(3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_SYSCALL32	(3*32+14) /* syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32	(3*32+15) /* sysenter in ia32 userspace */
 #define X86_FEATURE_REP_GOOD	(3*32+16) /* rep microcode works well on this CPU */
 #define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */
 #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
-#define X86_FEATURE_11AP	(3*32+19)  /* Bad local APIC aka 11AP */
+#define X86_FEATURE_11AP	(3*32+19) /* Bad local APIC aka 11AP */
+#define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
@@ -91,6 +92,7 @@
 #define X86_FEATURE_CX16	(4*32+13) /* CMPXCHG16B */
 #define X86_FEATURE_XTPR	(4*32+14) /* Send Task Priority Messages */
 #define X86_FEATURE_DCA		(4*32+18) /* Direct Cache Access */
+#define X86_FEATURE_XMM4_2	(4*32+20) /* Streaming SIMD Extensions-4.2 */
 
 /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
 #define X86_FEATURE_XSTORE	(5*32+ 2) /* on-CPU RNG present (xstore insn) */
@@ -189,6 +191,7 @@ extern const char * const x86_power_flags[32];
 #define cpu_has_gbpages		boot_cpu_has(X86_FEATURE_GBPAGES)
 #define cpu_has_arch_perfmon	boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
 #define cpu_has_pat		boot_cpu_has(X86_FEATURE_PAT)
+#define cpu_has_xmm4_2		boot_cpu_has(X86_FEATURE_XMM4_2)
 
 #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
 # define cpu_has_invlpg		1
diff --git a/include/asm-x86/efi.h b/include/asm-x86/efi.h
index 7ed2bd7a7f5..d4f2b0abe92 100644
--- a/include/asm-x86/efi.h
+++ b/include/asm-x86/efi.h
@@ -86,7 +86,7 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3,
 	efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
 		  (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
 
-extern void *efi_ioremap(unsigned long addr, unsigned long size);
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size);
 
 #endif /* CONFIG_X86_32 */
 
diff --git a/include/asm-x86/genapic_32.h b/include/asm-x86/genapic_32.h
index b02ea6e17de..754d635f90f 100644
--- a/include/asm-x86/genapic_32.h
+++ b/include/asm-x86/genapic_32.h
@@ -118,6 +118,7 @@ enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
 #define get_uv_system_type()		UV_NONE
 #define is_uv_system()			0
 #define uv_wakeup_secondary(a, b)	1
+#define uv_system_init()		do {} while (0)
 
 
 #endif
diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h
index 0f8504627c4..a47d6312913 100644
--- a/include/asm-x86/genapic_64.h
+++ b/include/asm-x86/genapic_64.h
@@ -42,6 +42,7 @@ extern int is_uv_system(void);
 extern struct genapic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
 extern void uv_cpu_init(void);
+extern void uv_system_init(void);
 extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
 
 extern void setup_apic_routing(void);
diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h
index bb06027fc83..2c1cda0b8a8 100644
--- a/include/asm-x86/geode.h
+++ b/include/asm-x86/geode.h
@@ -50,6 +50,7 @@ extern int geode_get_dev_base(unsigned int dev);
 #define MSR_PIC_YSEL_HIGH	0x51400021
 #define MSR_PIC_ZSEL_LOW	0x51400022
 #define MSR_PIC_ZSEL_HIGH	0x51400023
+#define MSR_PIC_IRQM_LPC	0x51400025
 
 #define MSR_MFGPT_IRQ		0x51400028
 #define MSR_MFGPT_NR		0x51400029
@@ -237,7 +238,7 @@ static inline u16 geode_mfgpt_read(int timer, u16 reg)
 }
 
 extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
-extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
+extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
 extern int geode_mfgpt_alloc_timer(int timer, int domain);
 
 #define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h
index 77ba51df566..edd0b95f14d 100644
--- a/include/asm-x86/hw_irq.h
+++ b/include/asm-x86/hw_irq.h
@@ -98,9 +98,17 @@ extern void (*const interrupt[NR_IRQS])(void);
 #else
 typedef int vector_irq_t[NR_VECTORS];
 DECLARE_PER_CPU(vector_irq_t, vector_irq);
-extern spinlock_t vector_lock;
 #endif
-extern void setup_vector_irq(int cpu);
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_X86_64)
+extern void lock_vector_lock(void);
+extern void unlock_vector_lock(void);
+extern void __setup_vector_irq(int cpu);
+#else
+static inline void lock_vector_lock(void) {}
+static inline void unlock_vector_lock(void) {}
+static inline void __setup_vector_irq(int cpu) {}
+#endif
 
 #endif /* !ASSEMBLY_ */
 
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index 96fa8449ff1..56d00e31aec 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -13,6 +13,7 @@
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
 #include <linux/regset.h>
+#include <linux/hardirq.h>
 #include <asm/asm.h>
 #include <asm/processor.h>
 #include <asm/sigcontext.h>
@@ -62,8 +63,6 @@ static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
 #else
 		     : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
 #endif
-	if (unlikely(err))
-		init_fpu(current);
 	return err;
 }
 
@@ -236,6 +235,37 @@ static inline void kernel_fpu_end(void)
 	preempt_enable();
 }
 
+/*
+ * Some instructions like VIA's padlock instructions generate a spurious
+ * DNA fault but don't modify SSE registers. And these instructions
+ * get used from interrupt context aswell. To prevent these kernel instructions
+ * in interrupt context interact wrongly with other user/kernel fpu usage, we
+ * should use them only in the context of irq_ts_save/restore()
+ */
+static inline int irq_ts_save(void)
+{
+	/*
+	 * If we are in process context, we are ok to take a spurious DNA fault.
+	 * Otherwise, doing clts() in process context require pre-emption to
+	 * be disabled or some heavy lifting like kernel_fpu_begin()
+	 */
+	if (!in_interrupt())
+		return 0;
+
+	if (read_cr0() & X86_CR0_TS) {
+		clts();
+		return 1;
+	}
+
+	return 0;
+}
+
+static inline void irq_ts_restore(int TS_state)
+{
+	if (TS_state)
+		stts();
+}
+
 #ifdef CONFIG_X86_64
 
 static inline void save_init_fpu(struct task_struct *tsk)
diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h
index bf5d629b3a3..0f954dc89cb 100644
--- a/include/asm-x86/io.h
+++ b/include/asm-x86/io.h
@@ -21,7 +21,7 @@ extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 
 #define build_mmio_read(name, size, type, reg, barrier) \
 static inline type name(const volatile void __iomem *addr) \
-{ type ret; asm volatile("mov" size " %1,%0":"=" reg (ret) \
+{ type ret; asm volatile("mov" size " %1,%0":reg (ret) \
 :"m" (*(volatile type __force *)addr) barrier); return ret; }
 
 #define build_mmio_write(name, size, type, reg, barrier) \
@@ -29,13 +29,13 @@ static inline void name(type val, volatile void __iomem *addr) \
 { asm volatile("mov" size " %0,%1": :reg (val), \
 "m" (*(volatile type __force *)addr) barrier); }
 
-build_mmio_read(readb, "b", unsigned char, "q", :"memory")
-build_mmio_read(readw, "w", unsigned short, "r", :"memory")
-build_mmio_read(readl, "l", unsigned int, "r", :"memory")
+build_mmio_read(readb, "b", unsigned char, "=q", :"memory")
+build_mmio_read(readw, "w", unsigned short, "=r", :"memory")
+build_mmio_read(readl, "l", unsigned int, "=r", :"memory")
 
-build_mmio_read(__readb, "b", unsigned char, "q", )
-build_mmio_read(__readw, "w", unsigned short, "r", )
-build_mmio_read(__readl, "l", unsigned int, "r", )
+build_mmio_read(__readb, "b", unsigned char, "=q", )
+build_mmio_read(__readw, "w", unsigned short, "=r", )
+build_mmio_read(__readl, "l", unsigned int, "=r", )
 
 build_mmio_write(writeb, "b", unsigned char, "q", :"memory")
 build_mmio_write(writew, "w", unsigned short, "r", :"memory")
@@ -59,8 +59,8 @@ build_mmio_write(__writel, "l", unsigned int, "r", )
 #define mmiowb() barrier()
 
 #ifdef CONFIG_X86_64
-build_mmio_read(readq, "q", unsigned long, "r", :"memory")
-build_mmio_read(__readq, "q", unsigned long, "r", )
+build_mmio_read(readq, "q", unsigned long, "=r", :"memory")
+build_mmio_read(__readq, "q", unsigned long, "=r", )
 build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
 build_mmio_write(__writeq, "q", unsigned long, "r", )
 
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
index ecc8061904a..5f888cc5be4 100644
--- a/include/asm-x86/iommu.h
+++ b/include/asm-x86/iommu.h
@@ -7,6 +7,8 @@ extern struct dma_mapping_ops nommu_dma_ops;
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
 
+extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
+
 #ifdef CONFIG_GART_IOMMU
 extern int gart_iommu_aperture;
 extern int gart_iommu_aperture_allowed;
diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h
index 90b1d1f12f0..a48c7f2dbdc 100644
--- a/include/asm-x86/irq_vectors.h
+++ b/include/asm-x86/irq_vectors.h
@@ -76,6 +76,7 @@
 #define CALL_FUNCTION_SINGLE_VECTOR	0xfb
 #define THERMAL_APIC_VECTOR		0xfa
 #define THRESHOLD_APIC_VECTOR		0xf9
+#define UV_BAU_MESSAGE			0xf8
 #define INVALIDATE_TLB_VECTOR_END	0xf7
 #define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
 
@@ -109,7 +110,15 @@
 #define LAST_VM86_IRQ		15
 #define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
 
-#if !defined(CONFIG_X86_VOYAGER)
+#ifdef CONFIG_X86_64
+# if NR_CPUS < MAX_IO_APICS
+#  define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
+# else
+#  define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
+# endif
+# define NR_IRQ_VECTORS NR_IRQS
+
+#elif !defined(CONFIG_X86_VOYAGER)
 
 # if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS)
 
diff --git a/include/asm-x86/kexec.h b/include/asm-x86/kexec.h
index c0e52a14fd4..4246ab7dc98 100644
--- a/include/asm-x86/kexec.h
+++ b/include/asm-x86/kexec.h
@@ -41,6 +41,10 @@
 # define PAGES_NR		17
 #endif
 
+#ifdef CONFIG_X86_32
+# define KEXEC_CONTROL_CODE_MAX_SIZE	2048
+#endif
+
 #ifndef __ASSEMBLY__
 
 #include <linux/string.h>
@@ -63,7 +67,7 @@
 /* Maximum address we can use for the control code buffer */
 # define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
 
-# define KEXEC_CONTROL_CODE_SIZE	4096
+# define KEXEC_CONTROL_PAGE_SIZE	4096
 
 /* The native architecture */
 # define KEXEC_ARCH KEXEC_ARCH_386
@@ -79,7 +83,7 @@
 # define KEXEC_CONTROL_MEMORY_LIMIT     (0xFFFFFFFFFFUL)
 
 /* Allocate one page for the pdp and the second for the code */
-# define KEXEC_CONTROL_CODE_SIZE  (4096UL + 4096UL)
+# define KEXEC_CONTROL_PAGE_SIZE  (4096UL + 4096UL)
 
 /* The native architecture */
 # define KEXEC_ARCH KEXEC_ARCH_X86_64
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index bc34dc21f17..c2e34c27590 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -13,6 +13,7 @@
 
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/mmu_notifier.h>
 
 #include <linux/kvm.h>
 #include <linux/kvm_para.h>
@@ -251,6 +252,7 @@ struct kvm_vcpu_arch {
 		gfn_t gfn;	/* presumed gfn during guest pte update */
 		pfn_t pfn;	/* pfn corresponding to that gfn */
 		int largepage;
+		unsigned long mmu_seq;
 	} update_pte;
 
 	struct i387_fxsave_struct host_fx_image;
@@ -720,7 +722,7 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 
 #define __kvm_handle_fault_on_reboot(insn) \
 	"666: " insn "\n\t" \
-	".pushsection .text.fixup, \"ax\" \n" \
+	".pushsection .fixup, \"ax\" \n" \
 	"667: \n\t" \
 	KVM_EX_PUSH " $666b \n\t" \
 	"jmp kvm_handle_fault_on_reboot \n\t" \
@@ -729,4 +731,8 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 	KVM_EX_ENTRY " 666b, 667b \n\t" \
 	".popsection"
 
+#define KVM_ARCH_WANT_MMU_NOTIFIER
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
+int kvm_age_hva(struct kvm *kvm, unsigned long hva);
+
 #endif
diff --git a/include/asm-x86/mce.h b/include/asm-x86/mce.h
index 94f1fd79e22..531eaa58745 100644
--- a/include/asm-x86/mce.h
+++ b/include/asm-x86/mce.h
@@ -92,6 +92,7 @@ extern int mce_disabled;
 
 void mce_log(struct mce *m);
 DECLARE_PER_CPU(struct sys_device, device_mce);
+extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
 #ifdef CONFIG_X86_MCE_INTEL
 void mce_intel_feature_init(struct cpuinfo_x86 *c);
diff --git a/include/asm-x86/mman.h b/include/asm-x86/mman.h
index c1682b542da..90bc4108a4f 100644
--- a/include/asm-x86/mman.h
+++ b/include/asm-x86/mman.h
@@ -12,6 +12,7 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h
index 95beda07c6f..e293ab81e85 100644
--- a/include/asm-x86/mmconfig.h
+++ b/include/asm-x86/mmconfig.h
@@ -3,7 +3,7 @@
 
 #ifdef CONFIG_PCI_MMCONFIG
 extern void __cpuinit fam10h_check_enable_mmcfg(void);
-extern void __init check_enable_amd_mmconf_dmi(void);
+extern void __cpuinit check_enable_amd_mmconf_dmi(void);
 #else
 static inline void fam10h_check_enable_mmcfg(void) { }
 static inline void check_enable_amd_mmconf_dmi(void) { }
diff --git a/include/asm-x86/mmzone_32.h b/include/asm-x86/mmzone_32.h
index b2298a22756..5862e646065 100644
--- a/include/asm-x86/mmzone_32.h
+++ b/include/asm-x86/mmzone_32.h
@@ -97,10 +97,16 @@ static inline int pfn_valid(int pfn)
 	reserve_bootmem_node(NODE_DATA(0), (addr), (size), (flags))
 #define alloc_bootmem(x) \
 	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_nopanic(x) \
+	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), SMP_CACHE_BYTES, \
+				__pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low(x) \
 	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0)
 #define alloc_bootmem_pages(x) \
 	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_nopanic(x) \
+	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), PAGE_SIZE, \
+				__pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages(x) \
 	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
 #define alloc_bootmem_node(pgdat, x)					\
diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h
index ca110ee73f0..2362cfda1fb 100644
--- a/include/asm-x86/msr.h
+++ b/include/asm-x86/msr.h
@@ -52,14 +52,14 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
 {
 	DECLARE_ARGS(val, low, high);
 
-	asm volatile("2: rdmsr ; xor %0,%0\n"
+	asm volatile("2: rdmsr ; xor %[err],%[err]\n"
 		     "1:\n\t"
 		     ".section .fixup,\"ax\"\n\t"
-		     "3:  mov %3,%0 ; jmp 1b\n\t"
+		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
 		     ".previous\n\t"
 		     _ASM_EXTABLE(2b, 3b)
-		     : "=r" (*err), EAX_EDX_RET(val, low, high)
-		     : "c" (msr), "i" (-EFAULT));
+		     : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
+		     : "c" (msr), [fault] "i" (-EFAULT));
 	return EAX_EDX_VAL(val, low, high);
 }
 
@@ -73,15 +73,15 @@ static inline int native_write_msr_safe(unsigned int msr,
 					unsigned low, unsigned high)
 {
 	int err;
-	asm volatile("2: wrmsr ; xor %0,%0\n"
+	asm volatile("2: wrmsr ; xor %[err],%[err]\n"
 		     "1:\n\t"
 		     ".section .fixup,\"ax\"\n\t"
-		     "3:  mov %4,%0 ; jmp 1b\n\t"
+		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
 		     ".previous\n\t"
 		     _ASM_EXTABLE(2b, 3b)
-		     : "=a" (err)
+		     : [err] "=a" (err)
 		     : "c" (msr), "0" (low), "d" (high),
-		       "i" (-EFAULT)
+		       [fault] "i" (-EFAULT)
 		     : "memory");
 	return err;
 }
@@ -192,19 +192,20 @@ do {                                                            \
 #define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0)
 
 #ifdef CONFIG_SMP
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 #else  /*  CONFIG_SMP  */
-static inline void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
 	rdmsr(msr_no, *l, *h);
+	return 0;
 }
-static inline void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
 	wrmsr(msr_no, l, h);
+	return 0;
 }
 static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
 				    u32 *l, u32 *h)
diff --git a/include/asm-x86/percpu.h b/include/asm-x86/percpu.h
index 4e91ee1e37a..f643a3a92da 100644
--- a/include/asm-x86/percpu.h
+++ b/include/asm-x86/percpu.h
@@ -182,7 +182,7 @@ do {							\
 	DEFINE_PER_CPU(_type, _name) = _initvalue;			\
 	__typeof__(_type) _name##_early_map[NR_CPUS] __initdata =	\
 				{ [0 ... NR_CPUS-1] = _initvalue };	\
-	__typeof__(_type) *_name##_early_ptr = _name##_early_map
+	__typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
 
 #define EXPORT_EARLY_PER_CPU_SYMBOL(_name)			\
 	EXPORT_PER_CPU_SYMBOL(_name)
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
index ac5fff4cc58..549144d03d9 100644
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -151,7 +151,7 @@ static inline void native_pgd_clear(pgd_t *pgd)
 #define VMALLOC_END      _AC(0xffffe1ffffffffff, UL)
 #define VMEMMAP_START	 _AC(0xffffe20000000000, UL)
 #define MODULES_VADDR    _AC(0xffffffffa0000000, UL)
-#define MODULES_END      _AC(0xfffffffffff00000, UL)
+#define MODULES_END      _AC(0xffffffffff000000, UL)
 #define MODULES_LEN   (MODULES_END - MODULES_VADDR)
 
 #ifndef __ASSEMBLY__
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
index 58a76f69ee3..c63a4765189 100644
--- a/include/asm-x86/processor.h
+++ b/include/asm-x86/processor.h
@@ -693,6 +693,29 @@ extern unsigned long		boot_option_idle_override;
 extern unsigned long		idle_halt;
 extern unsigned long		idle_nomwait;
 
+/*
+ * on systems with caches, caches must be flashed as the absolute
+ * last instruction before going into a suspended halt.  Otherwise,
+ * dirty data can linger in the cache and become stale on resume,
+ * leading to strange errors.
+ *
+ * perform a variety of operations to guarantee that the compiler
+ * will not reorder instructions.  wbinvd itself is serializing
+ * so the processor will not reorder.
+ *
+ * Systems without cache can just go into halt.
+ */
+static inline void wbinvd_halt(void)
+{
+	mb();
+	/* check for clflush to determine if wbinvd is legal */
+	if (cpu_has_clflush)
+		asm volatile("cli; wbinvd; 1: hlt; jmp 1b" : : : "memory");
+	else
+		while (1)
+			halt();
+}
+
 extern void enable_sep_cpu(void);
 extern int sysenter_setup(void);
 
diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h
index adec887dd7c..5c2ff4bc298 100644
--- a/include/asm-x86/required-features.h
+++ b/include/asm-x86/required-features.h
@@ -41,6 +41,12 @@
 # define NEED_3DNOW	0
 #endif
 
+#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64)
+# define NEED_NOPL	(1<<(X86_FEATURE_NOPL & 31))
+#else
+# define NEED_NOPL	0
+#endif
+
 #ifdef CONFIG_X86_64
 #define NEED_PSE	0
 #define NEED_MSR	(1<<(X86_FEATURE_MSR & 31))
@@ -67,7 +73,7 @@
 #define REQUIRED_MASK1	(NEED_LM|NEED_3DNOW)
 
 #define REQUIRED_MASK2	0
-#define REQUIRED_MASK3	0
+#define REQUIRED_MASK3	(NEED_NOPL)
 #define REQUIRED_MASK4	0
 #define REQUIRED_MASK5	0
 #define REQUIRED_MASK6	0
diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h
index 4f9a9861799..e39c790dbfd 100644
--- a/include/asm-x86/spinlock.h
+++ b/include/asm-x86/spinlock.h
@@ -65,7 +65,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 {
 	int tmp = ACCESS_ONCE(lock->slock);
 
-	return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1;
+	return (((tmp >> 8) - tmp) & 0xff) > 1;
 }
 
 static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
@@ -127,7 +127,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 {
 	int tmp = ACCESS_ONCE(lock->slock);
 
-	return (((tmp >> 16) & 0xffff) - (tmp & 0xffff)) > 1;
+	return (((tmp >> 16) - tmp) & 0xffff) > 1;
 }
 
 static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
diff --git a/include/asm-x86/uv/uv_bau.h b/include/asm-x86/uv/uv_bau.h
index 91ac0dfb758..610b6b308e9 100644
--- a/include/asm-x86/uv/uv_bau.h
+++ b/include/asm-x86/uv/uv_bau.h
@@ -40,11 +40,6 @@
 #define UV_ACTIVATION_DESCRIPTOR_SIZE	32
 #define UV_DISTRIBUTION_SIZE		256
 #define UV_SW_ACK_NPENDING		8
-#define UV_BAU_MESSAGE			200
-/*
- * Messaging irq; see irq_64.h and include/asm-x86/hw_irq_64.h
- * To be dynamically allocated in the future
- */
 #define UV_NET_ENDPOINT_INTD		0x38
 #define UV_DESC_BASE_PNODE_SHIFT	49
 #define UV_PAYLOADQ_PNODE_SHIFT		49
diff --git a/include/asm-x86/xen/hypervisor.h b/include/asm-x86/xen/hypervisor.h
index 8e15dd28c91..04ee0610014 100644
--- a/include/asm-x86/xen/hypervisor.h
+++ b/include/asm-x86/xen/hypervisor.h
@@ -35,7 +35,6 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 
 #include <xen/interface/xen.h>
 #include <xen/interface/version.h>
diff --git a/include/crypto/hash.h b/include/crypto/hash.h
index d12498ec8a4..ee48ef8fb2e 100644
--- a/include/crypto/hash.h
+++ b/include/crypto/hash.h
@@ -101,6 +101,24 @@ static inline int crypto_ahash_digest(struct ahash_request *req)
 	return crt->digest(req);
 }
 
+static inline int crypto_ahash_init(struct ahash_request *req)
+{
+	struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
+	return crt->init(req);
+}
+
+static inline int crypto_ahash_update(struct ahash_request *req)
+{
+	struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
+	return crt->update(req);
+}
+
+static inline int crypto_ahash_final(struct ahash_request *req)
+{
+	struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
+	return crt->final(req);
+}
+
 static inline void ahash_request_set_tfm(struct ahash_request *req,
 					 struct crypto_ahash *tfm)
 {
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 4c4142c5aa6..b68ec09399b 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -97,6 +97,7 @@ header-y += ioctl.h
 header-y += ip6_tunnel.h
 header-y += ipmi_msgdefs.h
 header-y += ipsec.h
+header-y += ip_vs.h
 header-y += ipx.h
 header-y += irda.h
 header-y += iso_fs.h
@@ -166,7 +167,8 @@ unifdef-y += acct.h
 unifdef-y += adb.h
 unifdef-y += adfs_fs.h
 unifdef-y += agpgart.h
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+      		  $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
 unifdef-y += a.out.h
 endif
 unifdef-y += apm_bios.h
@@ -249,13 +251,16 @@ unifdef-y += isdn.h
 unifdef-y += isdnif.h
 unifdef-y += isdn_divertif.h
 unifdef-y += isdn_ppp.h
+unifdef-y += ivtv.h
+unifdef-y += ivtvfb.h
 unifdef-y += joystick.h
 unifdef-y += kdev_t.h
 unifdef-y += kd.h
 unifdef-y += kernelcapi.h
 unifdef-y += kernel.h
 unifdef-y += keyboard.h
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+      		  $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
 unifdef-y += kvm.h
 endif
 unifdef-y += llc.h
@@ -294,7 +299,6 @@ unifdef-y += parport.h
 unifdef-y += patchkey.h
 unifdef-y += pci.h
 unifdef-y += personality.h
-unifdef-y += pim.h
 unifdef-y += pktcdvd.h
 unifdef-y += pmu.h
 unifdef-y += poll.h
@@ -355,6 +359,7 @@ unifdef-y += virtio_balloon.h
 unifdef-y += virtio_console.h
 unifdef-y += virtio_pci.h
 unifdef-y += virtio_ring.h
+unifdef-y += virtio_rng.h
 unifdef-y += vt.h
 unifdef-y += wait.h
 unifdef-y += wanrouter.h
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
index 972b12bcfb3..2b8df8b420f 100644
--- a/include/linux/agp_backend.h
+++ b/include/linux/agp_backend.h
@@ -30,6 +30,8 @@
 #ifndef _AGP_BACKEND_H
 #define _AGP_BACKEND_H 1
 
+#include <linux/list.h>
+
 enum chipset_type {
 	NOT_SUPPORTED,
 	SUPPORTED,
@@ -78,6 +80,8 @@ struct agp_memory {
 	bool is_bound;
 	bool is_flushed;
         bool vmalloc_flag;
+	/* list of agp_memory mapped to the aperture */
+	struct list_head mapped_list;
 };
 
 #define AGP_NORMAL_MEMORY 0
@@ -96,6 +100,7 @@ extern struct agp_memory *agp_allocate_memory(struct agp_bridge_data *, size_t,
 extern int agp_copy_info(struct agp_bridge_data *, struct agp_kern_info *);
 extern int agp_bind_memory(struct agp_memory *, off_t);
 extern int agp_unbind_memory(struct agp_memory *);
+extern int agp_rebind_memory(void);
 extern void agp_enable(struct agp_bridge_data *, u32);
 extern struct agp_bridge_data *agp_backend_acquire(struct pci_dev *);
 extern void agp_backend_release(struct agp_bridge_data *);
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 1c622e2b050..8a12d718c16 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -46,18 +46,48 @@ enum {
 	ATA_MAX_SECTORS_TAPE	= 65535,
 
 	ATA_ID_WORDS		= 256,
+	ATA_ID_CONFIG		= 0,
+	ATA_ID_CYLS		= 1,
+	ATA_ID_HEADS		= 3,
+	ATA_ID_SECTORS		= 6,
 	ATA_ID_SERNO		= 10,
+	ATA_ID_BUF_SIZE		= 21,
 	ATA_ID_FW_REV		= 23,
 	ATA_ID_PROD		= 27,
+	ATA_ID_MAX_MULTSECT	= 47,
+	ATA_ID_DWORD_IO		= 48,
+	ATA_ID_CAPABILITY	= 49,
 	ATA_ID_OLD_PIO_MODES	= 51,
+	ATA_ID_OLD_DMA_MODES	= 52,
 	ATA_ID_FIELD_VALID	= 53,
+	ATA_ID_CUR_CYLS		= 54,
+	ATA_ID_CUR_HEADS	= 55,
+	ATA_ID_CUR_SECTORS	= 56,
+	ATA_ID_MULTSECT		= 59,
+	ATA_ID_LBA_CAPACITY	= 60,
+	ATA_ID_SWDMA_MODES	= 62,
 	ATA_ID_MWDMA_MODES	= 63,
 	ATA_ID_PIO_MODES	= 64,
 	ATA_ID_EIDE_DMA_MIN	= 65,
+	ATA_ID_EIDE_DMA_TIME	= 66,
 	ATA_ID_EIDE_PIO		= 67,
 	ATA_ID_EIDE_PIO_IORDY	= 68,
-	ATA_ID_UDMA_MODES	= 88,
+	ATA_ID_QUEUE_DEPTH	= 75,
 	ATA_ID_MAJOR_VER	= 80,
+	ATA_ID_COMMAND_SET_1	= 82,
+	ATA_ID_COMMAND_SET_2	= 83,
+	ATA_ID_CFSSE		= 84,
+	ATA_ID_CFS_ENABLE_1	= 85,
+	ATA_ID_CFS_ENABLE_2	= 86,
+	ATA_ID_CSF_DEFAULT	= 87,
+	ATA_ID_UDMA_MODES	= 88,
+	ATA_ID_HW_CONFIG	= 93,
+	ATA_ID_SPG		= 98,
+	ATA_ID_LBA_CAPACITY_2	= 100,
+	ATA_ID_LAST_LUN		= 126,
+	ATA_ID_DLF		= 128,
+	ATA_ID_CSFO		= 129,
+	ATA_ID_CFA_POWER	= 160,
 	ATA_ID_PIO4		= (1 << 1),
 
 	ATA_ID_SERNO_LEN	= 20,
@@ -123,13 +153,26 @@ enum {
 	ATA_BUSY		= (1 << 7),	/* BSY status bit */
 	ATA_DRDY		= (1 << 6),	/* device ready */
 	ATA_DF			= (1 << 5),	/* device fault */
+	ATA_DSC			= (1 << 4),	/* drive seek complete */
 	ATA_DRQ			= (1 << 3),	/* data request i/o */
+	ATA_CORR		= (1 << 2),	/* corrected data error */
+	ATA_IDX			= (1 << 1),	/* index */
 	ATA_ERR			= (1 << 0),	/* have an error */
 	ATA_SRST		= (1 << 2),	/* software reset */
 	ATA_ICRC		= (1 << 7),	/* interface CRC error */
+	ATA_BBK			= ATA_ICRC,	/* pre-EIDE: block marked bad */
 	ATA_UNC			= (1 << 6),	/* uncorrectable media error */
+	ATA_MC			= (1 << 5),	/* media changed */
 	ATA_IDNF		= (1 << 4),	/* ID not found */
+	ATA_MCR			= (1 << 3),	/* media change requested */
 	ATA_ABORTED		= (1 << 2),	/* command aborted */
+	ATA_TRK0NF		= (1 << 1),	/* track 0 not found */
+	ATA_AMNF		= (1 << 0),	/* address mark not found */
+	ATAPI_LFS		= 0xF0,		/* last failed sense */
+	ATAPI_EOM		= ATA_TRK0NF,	/* end of media */
+	ATAPI_ILI		= ATA_AMNF,	/* illegal length indication */
+	ATAPI_IO		= (1 << 1),
+	ATAPI_COD		= (1 << 0),
 
 	/* ATA command block registers */
 	ATA_REG_DATA		= 0x00,
@@ -192,6 +235,13 @@ enum {
 	ATA_CMD_PMP_WRITE	= 0xE8,
 	ATA_CMD_CONF_OVERLAY	= 0xB1,
 	ATA_CMD_SEC_FREEZE_LOCK	= 0xF5,
+	ATA_CMD_SMART		= 0xB0,
+	ATA_CMD_MEDIA_LOCK	= 0xDE,
+	ATA_CMD_MEDIA_UNLOCK	= 0xDF,
+	/* marked obsolete in the ATA/ATAPI-7 spec */
+	ATA_CMD_RESTORE		= 0x10,
+	/* EXABYTE specific */
+	ATA_EXABYTE_ENABLE_NEST	= 0xF0,
 
 	/* READ_LOG_EXT pages */
 	ATA_LOG_SATA_NCQ	= 0x10,
@@ -232,6 +282,10 @@ enum {
 	SETFEATURES_WC_ON	= 0x02, /* Enable write cache */
 	SETFEATURES_WC_OFF	= 0x82, /* Disable write cache */
 
+	/* Enable/Disable Automatic Acoustic Management */
+	SETFEATURES_AAM_ON	= 0x42,
+	SETFEATURES_AAM_OFF	= 0xC2,
+
 	SETFEATURES_SPINUP	= 0x07, /* Spin-up drive */
 
 	SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
@@ -254,6 +308,15 @@ enum {
 	ATA_DCO_IDENTIFY	= 0xC2,
 	ATA_DCO_SET		= 0xC3,
 
+	/* feature values for SMART */
+	ATA_SMART_ENABLE	= 0xD8,
+	ATA_SMART_READ_VALUES	= 0xD0,
+	ATA_SMART_READ_THRESHOLDS = 0xD1,
+
+	/* password used in LBA Mid / LBA High for executing SMART commands */
+	ATA_SMART_LBAM_PASS	= 0x4F,
+	ATA_SMART_LBAH_PASS	= 0xC2,
+
 	/* ATAPI stuff */
 	ATAPI_PKT_DMA		= (1 << 0),
 	ATAPI_DMADIR		= (1 << 2),	/* ATAPI data dir:
@@ -438,17 +501,17 @@ static inline int ata_is_data(u8 prot)
 /*
  * id tests
  */
-#define ata_id_is_ata(id)	(((id)[0] & (1 << 15)) == 0)
-#define ata_id_has_lba(id)	((id)[49] & (1 << 9))
-#define ata_id_has_dma(id)	((id)[49] & (1 << 8))
+#define ata_id_is_ata(id)	(((id)[ATA_ID_CONFIG] & (1 << 15)) == 0)
+#define ata_id_has_lba(id)	((id)[ATA_ID_CAPABILITY] & (1 << 9))
+#define ata_id_has_dma(id)	((id)[ATA_ID_CAPABILITY] & (1 << 8))
 #define ata_id_has_ncq(id)	((id)[76] & (1 << 8))
-#define ata_id_queue_depth(id)	(((id)[75] & 0x1f) + 1)
-#define ata_id_removeable(id)	((id)[0] & (1 << 7))
+#define ata_id_queue_depth(id)	(((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
+#define ata_id_removeable(id)	((id)[ATA_ID_CONFIG] & (1 << 7))
 #define ata_id_has_atapi_AN(id)	\
 	( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
 	  ((id)[78] & (1 << 5)) )
-#define ata_id_iordy_disable(id) ((id)[49] & (1 << 10))
-#define ata_id_has_iordy(id) ((id)[49] & (1 << 11))
+#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
+#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
 #define ata_id_u32(id,n)	\
 	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
 #define ata_id_u64(id,n)	\
@@ -457,7 +520,7 @@ static inline int ata_is_data(u8 prot)
 	  ((u64) (id)[(n) + 1] << 16) |	\
 	  ((u64) (id)[(n) + 0]) )
 
-#define ata_id_cdb_intr(id)	(((id)[0] & 0x60) == 0x20)
+#define ata_id_cdb_intr(id)	(((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
 
 static inline bool ata_id_has_hipm(const u16 *id)
 {
@@ -482,75 +545,75 @@ static inline bool ata_id_has_dipm(const u16 *id)
 
 static inline int ata_id_has_fua(const u16 *id)
 {
-	if ((id[84] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000)
 		return 0;
-	return id[84] & (1 << 6);
+	return id[ATA_ID_CFSSE] & (1 << 6);
 }
 
 static inline int ata_id_has_flush(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[83] & (1 << 12);
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 12);
 }
 
 static inline int ata_id_has_flush_ext(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[83] & (1 << 13);
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 13);
 }
 
 static inline int ata_id_has_lba48(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	if (!ata_id_u64(id, 100))
+	if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2))
 		return 0;
-	return id[83] & (1 << 10);
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
 }
 
 static inline int ata_id_hpa_enabled(const u16 *id)
 {
 	/* Yes children, word 83 valid bits cover word 82 data */
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
 	/* And 87 covers 85-87 */
-	if ((id[87] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
 		return 0;
 	/* Check command sets enabled as well as supported */
-	if ((id[85] & ( 1 << 10)) == 0)
+	if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0)
 		return 0;
-	return id[82] & (1 << 10);
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 10);
 }
 
 static inline int ata_id_has_wcache(const u16 *id)
 {
 	/* Yes children, word 83 valid bits cover word 82 data */
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[82] & (1 << 5);
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 5);
 }
 
 static inline int ata_id_has_pm(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[82] & (1 << 3);
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 3);
 }
 
 static inline int ata_id_rahead_enabled(const u16 *id)
 {
-	if ((id[87] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
 		return 0;
-	return id[85] & (1 << 6);
+	return id[ATA_ID_CFS_ENABLE_1] & (1 << 6);
 }
 
 static inline int ata_id_wcache_enabled(const u16 *id)
 {
-	if ((id[87] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
 		return 0;
-	return id[85] & (1 << 5);
+	return id[ATA_ID_CFS_ENABLE_1] & (1 << 5);
 }
 
 /**
@@ -581,7 +644,7 @@ static inline unsigned int ata_id_major_version(const u16 *id)
 
 static inline int ata_id_is_sata(const u16 *id)
 {
-	return ata_id_major_version(id) >= 5 && id[93] == 0;
+	return ata_id_major_version(id) >= 5 && id[ATA_ID_HW_CONFIG] == 0;
 }
 
 static inline int ata_id_has_tpm(const u16 *id)
@@ -599,7 +662,7 @@ static inline int ata_id_has_dword_io(const u16 *id)
 	/* ATA 8 reuses this flag for "trusted" computing */
 	if (ata_id_major_version(id) > 7)
 		return 0;
-	if (id[48] & (1 << 0))
+	if (id[ATA_ID_DWORD_IO] & (1 << 0))
 		return 1;
 	return 0;
 }
@@ -608,22 +671,22 @@ static inline int ata_id_current_chs_valid(const u16 *id)
 {
 	/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
 	   has not been issued to the device then the values of
-	   id[54] to id[56] are vendor specific. */
-	return (id[53] & 0x01) && /* Current translation valid */
-		id[54] &&  /* cylinders in current translation */
-		id[55] &&  /* heads in current translation */
-		id[55] <= 16 &&
-		id[56];    /* sectors in current translation */
+	   id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */
+	return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */
+		id[ATA_ID_CUR_CYLS] &&  /* cylinders in current translation */
+		id[ATA_ID_CUR_HEADS] &&  /* heads in current translation */
+		id[ATA_ID_CUR_HEADS] <= 16 &&
+		id[ATA_ID_CUR_SECTORS];    /* sectors in current translation */
 }
 
 static inline int ata_id_is_cfa(const u16 *id)
 {
-	u16 v = id[0];
-	if (v == 0x848A)	/* Standard CF */
+	if (id[ATA_ID_CONFIG] == 0x848A)	/* Standard CF */
 		return 1;
 	/* Could be CF hiding as standard ATA */
-	if (ata_id_major_version(id) >= 3 &&  id[82] != 0xFFFF &&
-			(id[82] & ( 1 << 2)))
+	if (ata_id_major_version(id) >= 3 &&
+	    id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
+	   (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
 		return 1;
 	return 0;
 }
@@ -632,21 +695,21 @@ static inline int ata_drive_40wire(const u16 *dev_id)
 {
 	if (ata_id_is_sata(dev_id))
 		return 0;	/* SATA */
-	if ((dev_id[93] & 0xE000) == 0x6000)
+	if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000)
 		return 0;	/* 80 wire */
 	return 1;
 }
 
 static inline int ata_drive_40wire_relaxed(const u16 *dev_id)
 {
-	if ((dev_id[93] & 0x2000) == 0x2000)
+	if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000)
 		return 0;	/* 80 wire */
 	return 1;
 }
 
 static inline int atapi_cdb_len(const u16 *dev_id)
 {
-	u16 tmp = dev_id[0] & 0x3;
+	u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3;
 	switch (tmp) {
 	case 0:		return 12;
 	case 1:		return 16;
@@ -656,7 +719,7 @@ static inline int atapi_cdb_len(const u16 *dev_id)
 
 static inline int atapi_command_packet_set(const u16 *dev_id)
 {
-	return (dev_id[0] >> 8) & 0x1f;
+	return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f;
 }
 
 static inline int atapi_id_dmadir(const u16 *dev_id)
@@ -682,7 +745,7 @@ static inline int ata_ok(u8 status)
 static inline int lba_28_ok(u64 block, u32 n_block)
 {
 	/* check the ending block number */
-	return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
+	return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256);
 }
 
 static inline int lba_48_ok(u64 block, u32 n_block)
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 1abfe664c44..89781fd4885 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -110,6 +110,7 @@ extern int __bitmap_weight(const unsigned long *bitmap, int bits);
 
 extern int bitmap_scnprintf(char *buf, unsigned int len,
 			const unsigned long *src, int nbits);
+extern int bitmap_scnprintf_len(unsigned int nr_bits);
 extern int __bitmap_parse(const char *buf, unsigned int buflen, int is_user,
 			unsigned long *dst, int nbits);
 extern int bitmap_parse_user(const char __user *ubuf, unsigned int ulen,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 88d68081a0f..53ea933cf60 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -280,6 +280,15 @@ struct blk_queue_tag {
 	atomic_t refcnt;		/* map can be shared */
 };
 
+#define BLK_SCSI_MAX_CMDS	(256)
+#define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
+
+struct blk_cmd_filter {
+	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
+	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
+	struct kobject kobj;
+};
+
 struct request_queue
 {
 	/*
@@ -398,6 +407,7 @@ struct request_queue
 #if defined(CONFIG_BLK_DEV_BSG)
 	struct bsg_class_device bsg_dev;
 #endif
+	struct blk_cmd_filter cmd_filter;
 };
 
 #define QUEUE_FLAG_CLUSTER	0	/* cluster several segments into 1 */
@@ -655,6 +665,7 @@ extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
 extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
 extern void blk_requeue_request(struct request_queue *, struct request *);
 extern void blk_plug_device(struct request_queue *);
+extern void blk_plug_device_unlocked(struct request_queue *);
 extern int blk_remove_plug(struct request_queue *);
 extern void blk_recount_segments(struct request_queue *, struct bio *);
 extern int scsi_cmd_ioctl(struct file *, struct request_queue *,
@@ -806,8 +817,6 @@ extern void blk_put_queue(struct request_queue *);
 /*
  * tag stuff
  */
-#define blk_queue_tag_depth(q)		((q)->queue_tags->busy)
-#define blk_queue_tag_queue(q)		((q)->queue_tags->busy < (q)->queue_tags->max_depth)
 #define blk_rq_tagged(rq)		((rq)->cmd_flags & REQ_QUEUED)
 extern int blk_queue_start_tag(struct request_queue *, struct request *);
 extern struct request *blk_queue_find_tag(struct request_queue *, int);
@@ -832,11 +841,9 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *);
 /*
 * command filter functions
 */
-extern int blk_verify_command(struct file *file, unsigned char *cmd);
-extern int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
-					 unsigned char *cmd, mode_t *f_mode);
-extern int blk_register_filter(struct gendisk *disk);
-extern void blk_unregister_filter(struct gendisk *disk);
+extern int blk_verify_command(struct blk_cmd_filter *filter,
+			      unsigned char *cmd, int has_write_perm);
+extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
 
 #define MAX_PHYS_SEGMENTS 128
 #define MAX_HW_SEGMENTS 128
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 652470b687c..95837bfb525 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -97,10 +97,14 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
 #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
 #define alloc_bootmem(x) \
 	__alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_nopanic(x) \
+	__alloc_bootmem_nopanic(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low(x) \
 	__alloc_bootmem_low(x, SMP_CACHE_BYTES, 0)
 #define alloc_bootmem_pages(x) \
 	__alloc_bootmem(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_nopanic(x) \
+	__alloc_bootmem_nopanic(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages(x) \
 	__alloc_bootmem_low(x, PAGE_SIZE, 0)
 #define alloc_bootmem_node(pgdat, x) \
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 50cfe8ceb47..eadaab44015 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -115,7 +115,6 @@ BUFFER_FNS(Uptodate, uptodate)
 BUFFER_FNS(Dirty, dirty)
 TAS_BUFFER_FNS(Dirty, dirty)
 BUFFER_FNS(Lock, locked)
-TAS_BUFFER_FNS(Lock, locked)
 BUFFER_FNS(Req, req)
 TAS_BUFFER_FNS(Req, req)
 BUFFER_FNS(Mapped, mapped)
@@ -321,10 +320,15 @@ static inline void wait_on_buffer(struct buffer_head *bh)
 		__wait_on_buffer(bh);
 }
 
+static inline int trylock_buffer(struct buffer_head *bh)
+{
+	return likely(!test_and_set_bit(BH_Lock, &bh->b_state));
+}
+
 static inline void lock_buffer(struct buffer_head *bh)
 {
 	might_sleep();
-	if (test_set_buffer_locked(bh))
+	if (!trylock_buffer(bh))
 		__lock_buffer(bh);
 }
 
diff --git a/include/linux/byteorder.h b/include/linux/byteorder.h
new file mode 100644
index 00000000000..29f002d73d9
--- /dev/null
+++ b/include/linux/byteorder.h
@@ -0,0 +1,372 @@
+#ifndef _LINUX_BYTEORDER_H
+#define _LINUX_BYTEORDER_H
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#if defined(__LITTLE_ENDIAN) && defined(__BIG_ENDIAN)
+# error Fix asm/byteorder.h to define one endianness
+#endif
+
+#if !defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN)
+# error Fix asm/byteorder.h to define arch endianness
+#endif
+
+#ifdef __LITTLE_ENDIAN
+# undef __LITTLE_ENDIAN
+# define __LITTLE_ENDIAN 1234
+#endif
+
+#ifdef __BIG_ENDIAN
+# undef __BIG_ENDIAN
+# define __BIG_ENDIAN 4321
+#endif
+
+#if defined(__LITTLE_ENDIAN) && !defined(__LITTLE_ENDIAN_BITFIELD)
+# define __LITTLE_ENDIAN_BITFIELD
+#endif
+
+#if defined(__BIG_ENDIAN) && !defined(__BIG_ENDIAN_BITFIELD)
+# define __BIG_ENDIAN_BITFIELD
+#endif
+
+#ifdef __LITTLE_ENDIAN
+# define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
+# define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
+# define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
+# define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
+# define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
+# define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
+
+# define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
+# define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
+# define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
+# define __cpu_to_be16(x) ((__force __be16)__swab16(x))
+# define __cpu_to_be32(x) ((__force __be32)__swab32(x))
+# define __cpu_to_be64(x) ((__force __be64)__swab64(x))
+#endif
+
+#ifdef __BIG_ENDIAN
+# define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
+# define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
+# define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
+# define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
+# define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
+# define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
+
+# define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
+# define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
+# define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
+# define __cpu_to_le16(x) ((__force __le16)__swab16(x))
+# define __cpu_to_le32(x) ((__force __le32)__swab32(x))
+# define __cpu_to_le64(x) ((__force __le64)__swab64(x))
+#endif
+
+/*
+ * These helpers could be phased out over time as the base version
+ * handles constant folding.
+ */
+#define __constant_htonl(x) __cpu_to_be32(x)
+#define __constant_ntohl(x) __be32_to_cpu(x)
+#define __constant_htons(x) __cpu_to_be16(x)
+#define __constant_ntohs(x) __be16_to_cpu(x)
+
+#define __constant_le16_to_cpu(x) __le16_to_cpu(x)
+#define __constant_le32_to_cpu(x) __le32_to_cpu(x)
+#define __constant_le64_to_cpu(x) __le64_to_cpu(x)
+#define __constant_be16_to_cpu(x) __be16_to_cpu(x)
+#define __constant_be32_to_cpu(x) __be32_to_cpu(x)
+#define __constant_be64_to_cpu(x) __be64_to_cpu(x)
+
+#define __constant_cpu_to_le16(x) __cpu_to_le16(x)
+#define __constant_cpu_to_le32(x) __cpu_to_le32(x)
+#define __constant_cpu_to_le64(x) __cpu_to_le64(x)
+#define __constant_cpu_to_be16(x) __cpu_to_be16(x)
+#define __constant_cpu_to_be32(x) __cpu_to_be32(x)
+#define __constant_cpu_to_be64(x) __cpu_to_be64(x)
+
+static inline void __le16_to_cpus(__u16 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab16s(p);
+#endif
+}
+
+static inline void __cpu_to_le16s(__u16 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab16s(p);
+#endif
+}
+
+static inline void __le32_to_cpus(__u32 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab32s(p);
+#endif
+}
+
+static inline void __cpu_to_le32s(__u32 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab32s(p);
+#endif
+}
+
+static inline void __le64_to_cpus(__u64 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab64s(p);
+#endif
+}
+
+static inline void __cpu_to_le64s(__u64 *p)
+{
+#ifdef __BIG_ENDIAN
+	__swab64s(p);
+#endif
+}
+
+static inline void __be16_to_cpus(__u16 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab16s(p);
+#endif
+}
+
+static inline void __cpu_to_be16s(__u16 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab16s(p);
+#endif
+}
+
+static inline void __be32_to_cpus(__u32 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab32s(p);
+#endif
+}
+
+static inline void __cpu_to_be32s(__u32 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab32s(p);
+#endif
+}
+
+static inline void __be64_to_cpus(__u64 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab64s(p);
+#endif
+}
+
+static inline void __cpu_to_be64s(__u64 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	__swab64s(p);
+#endif
+}
+
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __u16)*p;
+#else
+	return __swab16p((__force __u16 *)p);
+#endif
+}
+
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __u32)*p;
+#else
+	return __swab32p((__force __u32 *)p);
+#endif
+}
+
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __u64)*p;
+#else
+	return __swab64p((__force __u64 *)p);
+#endif
+}
+
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __le16)*p;
+#else
+	return (__force __le16)__swab16p(p);
+#endif
+}
+
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __le32)*p;
+#else
+	return (__force __le32)__swab32p(p);
+#endif
+}
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (__force __le64)*p;
+#else
+	return (__force __le64)__swab64p(p);
+#endif
+}
+
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __u16)*p;
+#else
+	return __swab16p((__force __u16 *)p);
+#endif
+}
+
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __u32)*p;
+#else
+	return __swab32p((__force __u32 *)p);
+#endif
+}
+
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __u64)*p;
+#else
+	return __swab64p((__force __u64 *)p);
+#endif
+}
+
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __be16)*p;
+#else
+	return (__force __be16)__swab16p(p);
+#endif
+}
+
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __be32)*p;
+#else
+	return (__force __be32)__swab32p(p);
+#endif
+}
+
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+#ifdef __BIG_ENDIAN
+	return (__force __be64)*p;
+#else
+	return (__force __be64)__swab64p(p);
+#endif
+}
+
+#ifdef __KERNEL__
+
+# define le16_to_cpu __le16_to_cpu
+# define le32_to_cpu __le32_to_cpu
+# define le64_to_cpu __le64_to_cpu
+# define be16_to_cpu __be16_to_cpu
+# define be32_to_cpu __be32_to_cpu
+# define be64_to_cpu __be64_to_cpu
+# define cpu_to_le16 __cpu_to_le16
+# define cpu_to_le32 __cpu_to_le32
+# define cpu_to_le64 __cpu_to_le64
+# define cpu_to_be16 __cpu_to_be16
+# define cpu_to_be32 __cpu_to_be32
+# define cpu_to_be64 __cpu_to_be64
+
+# define le16_to_cpup __le16_to_cpup
+# define le32_to_cpup __le32_to_cpup
+# define le64_to_cpup __le64_to_cpup
+# define be16_to_cpup __be16_to_cpup
+# define be32_to_cpup __be32_to_cpup
+# define be64_to_cpup __be64_to_cpup
+# define cpu_to_le16p __cpu_to_le16p
+# define cpu_to_le32p __cpu_to_le32p
+# define cpu_to_le64p __cpu_to_le64p
+# define cpu_to_be16p __cpu_to_be16p
+# define cpu_to_be32p __cpu_to_be32p
+# define cpu_to_be64p __cpu_to_be64p
+
+# define le16_to_cpus __le16_to_cpus
+# define le32_to_cpus __le32_to_cpus
+# define le64_to_cpus __le64_to_cpus
+# define be16_to_cpus __be16_to_cpus
+# define be32_to_cpus __be32_to_cpus
+# define be64_to_cpus __be64_to_cpus
+# define cpu_to_le16s __cpu_to_le16s
+# define cpu_to_le32s __cpu_to_le32s
+# define cpu_to_le64s __cpu_to_le64s
+# define cpu_to_be16s __cpu_to_be16s
+# define cpu_to_be32s __cpu_to_be32s
+# define cpu_to_be64s __cpu_to_be64s
+
+/*
+ * They have to be macros in order to do the constant folding
+ * correctly - if the argument passed into a inline function
+ * it is no longer constant according to gcc..
+ */
+# undef ntohl
+# undef ntohs
+# undef htonl
+# undef htons
+
+# define ___htonl(x) __cpu_to_be32(x)
+# define ___htons(x) __cpu_to_be16(x)
+# define ___ntohl(x) __be32_to_cpu(x)
+# define ___ntohs(x) __be16_to_cpu(x)
+
+# define htonl(x) ___htonl(x)
+# define ntohl(x) ___ntohl(x)
+# define htons(x) ___htons(x)
+# define ntohs(x) ___ntohs(x)
+
+static inline void le16_add_cpu(__le16 *var, u16 val)
+{
+	*var = cpu_to_le16(le16_to_cpup(var) + val);
+}
+
+static inline void le32_add_cpu(__le32 *var, u32 val)
+{
+	*var = cpu_to_le32(le32_to_cpup(var) + val);
+}
+
+static inline void le64_add_cpu(__le64 *var, u64 val)
+{
+	*var = cpu_to_le64(le64_to_cpup(var) + val);
+}
+
+static inline void be16_add_cpu(__be16 *var, u16 val)
+{
+	*var = cpu_to_be16(be16_to_cpup(var) + val);
+}
+
+static inline void be32_add_cpu(__be32 *var, u32 val)
+{
+	*var = cpu_to_be32(be32_to_cpup(var) + val);
+}
+
+static inline void be64_add_cpu(__be64 *var, u64 val)
+{
+	*var = cpu_to_be64(be64_to_cpup(var) + val);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_BYTEORDER_H */
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 02673846d20..9d1fe30b6f6 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -503,8 +503,19 @@ extern const kernel_cap_t __cap_init_eff_set;
 
 kernel_cap_t cap_set_effective(const kernel_cap_t pE_new);
 
-int capable(int cap);
-int __capable(struct task_struct *t, int cap);
+/**
+ * has_capability - Determine if a task has a superior capability available
+ * @t: The task in question
+ * @cap: The capability to be tested for
+ *
+ * Return true if the specified task has the given superior capability
+ * currently in effect, false if not.
+ *
+ * Note that this does not set PF_SUPERPRIV on the task.
+ */
+#define has_capability(t, cap) (security_capable((t), (cap)) == 0)
+
+extern int capable(int cap);
 
 #endif /* __KERNEL__ */
 
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index c33b0dc28e4..ed3a5d473e5 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -127,6 +127,8 @@ extern int clockevents_register_notifier(struct notifier_block *nb);
 extern int clockevents_program_event(struct clock_event_device *dev,
 				     ktime_t expires, ktime_t now);
 
+extern void clockevents_handle_noop(struct clock_event_device *dev);
+
 #ifdef CONFIG_GENERIC_CLOCKEVENTS
 extern void clockevents_notify(unsigned long reason, void *arg);
 #else
diff --git a/include/linux/completion.h b/include/linux/completion.h
index d2961b66d53..02ef8835999 100644
--- a/include/linux/completion.h
+++ b/include/linux/completion.h
@@ -49,10 +49,13 @@ extern unsigned long wait_for_completion_timeout(struct completion *x,
 						   unsigned long timeout);
 extern unsigned long wait_for_completion_interruptible_timeout(
 			struct completion *x, unsigned long timeout);
+extern bool try_wait_for_completion(struct completion *x);
+extern bool completion_done(struct completion *x);
 
 extern void complete(struct completion *);
 extern void complete_all(struct completion *);
 
 #define INIT_COMPLETION(x)	((x).done = 0)
 
+
 #endif
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index d62c19ff041..7f627775c94 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -40,6 +40,7 @@
 #include <linux/list.h>
 #include <linux/kref.h>
 #include <linux/mutex.h>
+#include <linux/err.h>
 
 #include <asm/atomic.h>
 
@@ -129,8 +130,25 @@ struct configfs_attribute {
 /*
  * Users often need to create attribute structures for their configurable
  * attributes, containing a configfs_attribute member and function pointers
- * for the show() and store() operations on that attribute. They can use
- * this macro (similar to sysfs' __ATTR) to make defining attributes easier.
+ * for the show() and store() operations on that attribute. If they don't
+ * need anything else on the extended attribute structure, they can use
+ * this macro to define it  The argument _item is the name of the
+ * config_item structure.
+ */
+#define CONFIGFS_ATTR_STRUCT(_item)					\
+struct _item##_attribute {						\
+	struct configfs_attribute attr;					\
+	ssize_t (*show)(struct _item *, char *);			\
+	ssize_t (*store)(struct _item *, const char *, size_t);		\
+}
+
+/*
+ * With the extended attribute structure, users can use this macro
+ * (similar to sysfs' __ATTR) to make defining attributes easier.
+ * An example:
+ * #define MYITEM_ATTR(_name, _mode, _show, _store)	\
+ * struct myitem_attribute childless_attr_##_name =	\
+ *         __CONFIGFS_ATTR(_name, _mode, _show, _store)
  */
 #define __CONFIGFS_ATTR(_name, _mode, _show, _store)			\
 {									\
@@ -142,6 +160,52 @@ struct configfs_attribute {
 	.show	= _show,						\
 	.store	= _store,						\
 }
+/* Here is a readonly version, only requiring a show() operation */
+#define __CONFIGFS_ATTR_RO(_name, _show)				\
+{									\
+	.attr	= {							\
+			.ca_name = __stringify(_name),			\
+			.ca_mode = 0444,				\
+			.ca_owner = THIS_MODULE,			\
+	},								\
+	.show	= _show,						\
+}
+
+/*
+ * With these extended attributes, the simple show_attribute() and
+ * store_attribute() operations need to call the show() and store() of the
+ * attributes.  This is a common pattern, so we provide a macro to define
+ * them.  The argument _item is the name of the config_item structure.
+ * This macro expects the attributes to be named "struct <name>_attribute"
+ * and the function to_<name>() to exist;
+ */
+#define CONFIGFS_ATTR_OPS(_item)					\
+static ssize_t _item##_attr_show(struct config_item *item,		\
+				 struct configfs_attribute *attr,	\
+				 char *page)				\
+{									\
+	struct _item *_item = to_##_item(item);				\
+	struct _item##_attribute *_item##_attr =			\
+		container_of(attr, struct _item##_attribute, attr);	\
+	ssize_t ret = 0;						\
+									\
+	if (_item##_attr->show)						\
+		ret = _item##_attr->show(_item, page);			\
+	return ret;							\
+}									\
+static ssize_t _item##_attr_store(struct config_item *item,		\
+				  struct configfs_attribute *attr,	\
+				  const char *page, size_t count)	\
+{									\
+	struct _item *_item = to_##_item(item);				\
+	struct _item##_attribute *_item##_attr =			\
+		container_of(attr, struct _item##_attribute, attr);	\
+	ssize_t ret = -EINVAL;						\
+									\
+	if (_item##_attr->store)					\
+		ret = _item##_attr->store(_item, page, count);		\
+	return ret;							\
+}
 
 /*
  * If allow_link() exists, the item can symlink(2) out to other
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 96a89d3d672..5c7f9468f75 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -38,8 +38,9 @@
 #define CN_W1_VAL			0x1
 #define CN_IDX_V86D			0x4
 #define CN_VAL_V86D_UVESAFB		0x1
+#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
 
-#define CN_NETLINK_USERS		5
+#define CN_NETLINK_USERS		6
 
 /*
  * Maximum connector's message size.
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 2270ca5ec63..6fd5668aa57 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -106,6 +106,7 @@ struct cpufreq_policy {
 #define CPUFREQ_ADJUST		(0)
 #define CPUFREQ_INCOMPATIBLE	(1)
 #define CPUFREQ_NOTIFY		(2)
+#define CPUFREQ_START		(3)
 
 #define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
 #define CPUFREQ_SHARED_TYPE_HW	 (1) /* HW does needed coordination */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 96d0509fb8d..d3219d73f8e 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -287,7 +287,7 @@ static inline const cpumask_t *get_cpu_mask(unsigned int cpu)
  * gcc optimizes it out (it's a constant) and there's no huge stack
  * variable created:
  */
-#define cpumask_of_cpu(cpu) ({ *get_cpu_mask(cpu); })
+#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
 
 
 #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index e8f450c499b..2691926fb50 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -160,7 +160,7 @@ static inline int current_cpuset_is_being_rebound(void)
 
 static inline void rebuild_sched_domains(void)
 {
-	partition_sched_domains(0, NULL, NULL);
+	partition_sched_domains(1, NULL, NULL);
 }
 
 #endif /* !CONFIG_CPUSETS */
diff --git a/include/linux/cred.h b/include/linux/cred.h
new file mode 100644
index 00000000000..b69222cc1fd
--- /dev/null
+++ b/include/linux/cred.h
@@ -0,0 +1,50 @@
+/* Credentials management
+ *
+ * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_CRED_H
+#define _LINUX_CRED_H
+
+#define get_current_user()	(get_uid(current->user))
+
+#define task_uid(task)		((task)->uid)
+#define task_gid(task)		((task)->gid)
+#define task_euid(task)		((task)->euid)
+#define task_egid(task)		((task)->egid)
+
+#define current_uid()		(current->uid)
+#define current_gid()		(current->gid)
+#define current_euid()		(current->euid)
+#define current_egid()		(current->egid)
+#define current_suid()		(current->suid)
+#define current_sgid()		(current->sgid)
+#define current_fsuid()		(current->fsuid)
+#define current_fsgid()		(current->fsgid)
+#define current_cap()		(current->cap_effective)
+
+#define current_uid_gid(_uid, _gid)		\
+do {						\
+	*(_uid) = current->uid;			\
+	*(_gid) = current->gid;			\
+} while(0)
+
+#define current_euid_egid(_uid, _gid)		\
+do {						\
+	*(_uid) = current->euid;		\
+	*(_gid) = current->egid;		\
+} while(0)
+
+#define current_fsuid_fsgid(_uid, _gid)		\
+do {						\
+	*(_uid) = current->fsuid;		\
+	*(_gid) = current->fsgid;		\
+} while(0)
+
+#endif /* _LINUX_CRED_H */
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 98202c672fd..efba1de629a 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -230,6 +230,7 @@ extern void d_delete(struct dentry *);
 extern struct dentry * d_alloc(struct dentry *, const struct qstr *);
 extern struct dentry * d_alloc_anon(struct inode *);
 extern struct dentry * d_splice_alias(struct inode *, struct dentry *);
+extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *);
 extern void shrink_dcache_sb(struct super_block *);
 extern void shrink_dcache_parent(struct dentry *);
 extern void shrink_dcache_for_umount(struct super_block *);
diff --git a/include/linux/device.h b/include/linux/device.h
index d24a47f80f9..4d8372d135d 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -358,6 +358,7 @@ struct device {
 
 	struct kobject kobj;
 	char	bus_id[BUS_ID_SIZE];	/* position on parent bus */
+	const char		*init_name; /* initial name of the device */
 	struct device_type	*type;
 	unsigned		uevent_suppress:1;
 
@@ -406,7 +407,7 @@ struct device {
 /* Get the wakeup routines, which depend on struct device */
 #include <linux/pm_wakeup.h>
 
-static inline const char *dev_name(struct device *dev)
+static inline const char *dev_name(const struct device *dev)
 {
 	/* will be changed into kobject_name(&dev->kobj) in the near future */
 	return dev->bus_id;
@@ -518,7 +519,7 @@ extern void device_shutdown(void);
 extern void sysdev_shutdown(void);
 
 /* debugging and troubleshooting/diagnostic helpers. */
-extern const char *dev_driver_string(struct device *dev);
+extern const char *dev_driver_string(const struct device *dev);
 #define dev_printk(level, dev, format, arg...)	\
 	printk(level "%s %s: " format , dev_driver_string(dev) , \
 	       dev_name(dev) , ## arg)
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
index fc82446b642..c30879cf93b 100644
--- a/include/linux/dm9000.h
+++ b/include/linux/dm9000.h
@@ -27,6 +27,7 @@
 
 struct dm9000_plat_data {
 	unsigned int	flags;
+	unsigned char	dev_addr[6];
 
 	/* allow replacement IO routines */
 
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 8bb5e87df36..b4b038b89ee 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -27,9 +27,24 @@ struct ethtool_cmd {
 	__u8	autoneg;	/* Enable or disable autonegotiation */
 	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
 	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u32	reserved[4];
+	__u16	speed_hi;
+	__u16	reserved2;
+	__u32	reserved[3];
 };
 
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+						__u32 speed)
+{
+
+	ep->speed = (__u16)speed;
+	ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
+
 #define ETHTOOL_BUSINFO_LEN	32
 /* these strings are set to whatever the driver author decides... */
 struct ethtool_drvinfo {
diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h
index f5abd130663..27e772cefb6 100644
--- a/include/linux/exportfs.h
+++ b/include/linux/exportfs.h
@@ -35,6 +35,27 @@ enum fid_type {
 	FILEID_INO32_GEN_PARENT = 2,
 
 	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number.
+	 */
+	FILEID_BTRFS_WITHOUT_PARENT = 0x4d,
+
+	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number,
+	 * 64 bit parent object ID, 32 bit parent generation.
+	 */
+	FILEID_BTRFS_WITH_PARENT = 0x4e,
+
+	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number,
+	 * 64 bit parent object ID, 32 bit parent generation,
+	 * 64 bit parent root object ID.
+	 */
+	FILEID_BTRFS_WITH_PARENT_ROOT = 0x4f,
+
+	/*
 	 * 32 bit block number, 16 bit partition reference,
 	 * 16 bit unused, 32 bit generation number.
 	 */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 3b8870e32af..531ccd5f596 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -976,6 +976,9 @@ static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
 
 /* drivers/video/fb_defio.c */
 extern void fb_deferred_io_init(struct fb_info *info);
+extern void fb_deferred_io_open(struct fb_info *info,
+				struct inode *inode,
+				struct file *file);
 extern void fb_deferred_io_cleanup(struct fb_info *info);
 extern int fb_deferred_io_fsync(struct file *file, struct dentry *dentry,
 				int datasync);
diff --git a/include/linux/file.h b/include/linux/file.h
index 27c64bdc68c..a20259e248a 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -34,8 +34,9 @@ extern struct file *fget(unsigned int fd);
 extern struct file *fget_light(unsigned int fd, int *fput_needed);
 extern void set_close_on_exec(unsigned int fd, int flag);
 extern void put_filp(struct file *);
+extern int alloc_fd(unsigned start, unsigned flags);
 extern int get_unused_fd(void);
-extern int get_unused_fd_flags(int flags);
+#define get_unused_fd_flags(flags) alloc_fd(0, (flags))
 extern void put_unused_fd(unsigned int fd);
 
 extern void fd_install(unsigned int fd, struct file *file);
diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h
index acbdbcc1605..6e199c8dfac 100644
--- a/include/linux/firmware-map.h
+++ b/include/linux/firmware-map.h
@@ -24,34 +24,8 @@
  */
 #ifdef CONFIG_FIRMWARE_MEMMAP
 
-/**
- * Adds a firmware mapping entry. This function uses kmalloc() for memory
- * allocation. Use firmware_map_add_early() if you want to use the bootmem
- * allocator.
- *
- * That function must be called before late_initcall.
- *
- * @start: Start of the memory range.
- * @end:   End of the memory range (inclusive).
- * @type:  Type of the memory range.
- *
- * Returns 0 on success, or -ENOMEM if no memory could be allocated.
- */
 int firmware_map_add(resource_size_t start, resource_size_t end,
 		     const char *type);
-
-/**
- * Adds a firmware mapping entry. This function uses the bootmem allocator
- * for memory allocation. Use firmware_map_add() if you want to use kmalloc().
- *
- * That function must be called before late_initcall.
- *
- * @start: Start of the memory range.
- * @end:   End of the memory range (inclusive).
- * @type:  Type of the memory range.
- *
- * Returns 0 on success, or -ENOMEM if no memory could be allocated.
- */
 int firmware_map_add_early(resource_size_t start, resource_size_t end,
 			   const char *type);
 
diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h
index 809bb9ffc78..36b61ff3927 100644
--- a/include/linux/fs_uart_pd.h
+++ b/include/linux/fs_uart_pd.h
@@ -12,7 +12,6 @@
 #ifndef FS_UART_PD_H
 #define FS_UART_PD_H
 
-#include <linux/version.h>
 #include <asm/types.h>
 
 enum fs_uart_id {
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index f368d041e02..bb384068272 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -98,6 +98,27 @@ static inline void tracer_disable(void)
 #endif
 }
 
+/* Ftrace disable/restore without lock. Some synchronization mechanism
+ * must be used to prevent ftrace_enabled to be changed between
+ * disable/restore. */
+static inline int __ftrace_enabled_save(void)
+{
+#ifdef CONFIG_FTRACE
+	int saved_ftrace_enabled = ftrace_enabled;
+	ftrace_enabled = 0;
+	return saved_ftrace_enabled;
+#else
+	return 0;
+#endif
+}
+
+static inline void __ftrace_enabled_restore(int enabled)
+{
+#ifdef CONFIG_FTRACE
+	ftrace_enabled = enabled;
+#endif
+}
+
 #ifdef CONFIG_FRAME_POINTER
 /* TODO: need to fix this for ARM */
 # define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 118216f1bd3..be4f5e5bfe0 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -110,15 +110,6 @@ struct hd_struct {
 #define GENHD_FL_SUPPRESS_PARTITION_INFO	32
 #define GENHD_FL_FAIL				64
 
-#define BLK_SCSI_MAX_CMDS	(256)
-#define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
-
-struct blk_scsi_cmd_filter {
-	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
-	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
-	struct kobject kobj;
-};
-
 struct gendisk {
 	int major;			/* major number of driver */
 	int first_minor;
@@ -128,7 +119,6 @@ struct gendisk {
 	struct hd_struct **part;	/* [indexed by minor] */
 	struct block_device_operations *fops;
 	struct request_queue *queue;
-	struct blk_scsi_cmd_filter cmd_filter;
 	void *private_data;
 	sector_t capacity;
 
diff --git a/include/linux/harrier_defs.h b/include/linux/harrier_defs.h
deleted file mode 100644
index efef11db790..00000000000
--- a/include/linux/harrier_defs.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * include/linux/harrier_defs.h
- *
- * Definitions for Motorola MCG Harrier North Bridge & Memory controller
- *
- * Author: Dale Farnsworth
- *         dale.farnsworth@mvista.com
- *
- * Extracted from asm-ppc/harrier.h by:
- * 	   Randy Vinson
- * 	   rvinson@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASMPPC_HARRIER_DEFS_H
-#define __ASMPPC_HARRIER_DEFS_H
-
-#define HARRIER_DEFAULT_XCSR_BASE	0xfeff0000
-
-#define HARRIER_VEND_DEV_ID		0x1057480b
-
-#define HARRIER_VENI_OFF		0x00
-
-#define HARRIER_REVI_OFF		0x05
-#define HARRIER_UCTL_OFF		0xd0
-#define HARRIER_XTAL64_MASK		0x02
-
-#define HARRIER_MISC_CSR_OFF		0x1c
-#define HARRIER_RSTOUT			0x01000000
-#define HARRIER_SYSCON			0x08000000
-#define HARRIER_EREADY			0x10000000
-#define HARRIER_ERDYS			0x20000000
-
-/* Function exception registers */
-#define HARRIER_FEEN_OFF		0x40	/* enable */
-#define HARRIER_FEST_OFF		0x44	/* status */
-#define HARRIER_FEMA_OFF		0x48	/* mask */
-#define HARRIER_FECL_OFF		0x4c	/* clear */
-
-#define HARRIER_FE_DMA			0x80
-#define HARRIER_FE_MIDB			0x40
-#define HARRIER_FE_MIM0			0x20
-#define HARRIER_FE_MIM1			0x10
-#define HARRIER_FE_MIP			0x08
-#define HARRIER_FE_UA0			0x04
-#define HARRIER_FE_UA1			0x02
-#define HARRIER_FE_ABT			0x01
-
-#define HARRIER_SERIAL_0_OFF		0xc0
-
-#define HARRIER_MBAR_OFF		0xe0
-#define HARRIER_MBAR_MSK		0xfffc0000
-#define HARRIER_MPIC_CSR_OFF		0xe4
-#define HARRIER_MPIC_OPI_ENABLE		0x40
-#define HARRIER_MPIC_IFEVP_OFF		0x10200
-#define HARRIER_MPIC_IFEVP_VECT_MSK	0xff
-#define HARRIER_MPIC_IFEDE_OFF		0x10210
-
-/*
- * Define the Memory Controller register offsets.
- */
-#define HARRIER_SDBA_OFF		0x110
-#define HARRIER_SDBB_OFF		0x114
-#define HARRIER_SDBC_OFF		0x118
-#define HARRIER_SDBD_OFF		0x11c
-#define HARRIER_SDBE_OFF		0x120
-#define HARRIER_SDBF_OFF		0x124
-#define HARRIER_SDBG_OFF		0x128
-#define HARRIER_SDBH_OFF		0x12c
-
-#define HARRIER_SDB_ENABLE		0x00000100
-#define HARRIER_SDB_SIZE_MASK		0xf
-#define HARRIER_SDB_SIZE_SHIFT		16
-#define HARRIER_SDB_BASE_MASK		0xff
-#define HARRIER_SDB_BASE_SHIFT		24
-
-/*
- * Define outbound register offsets.
- */
-#define HARRIER_OTAD0_OFF		0x220
-#define HARRIER_OTOF0_OFF		0x224
-#define HARRIER_OTAD1_OFF		0x228
-#define HARRIER_OTOF1_OFF		0x22c
-#define HARRIER_OTAD2_OFF		0x230
-#define HARRIER_OTOF2_OFF		0x234
-#define HARRIER_OTAD3_OFF		0x238
-#define HARRIER_OTOF3_OFF		0x23c
-
-#define HARRIER_OTADX_START_MSK		0xffff0000UL
-#define HARRIER_OTADX_END_MSK		0x0000ffffUL
-
-#define HARRIER_OTOFX_OFF_MSK		0xffff0000UL
-#define HARRIER_OTOFX_ENA		0x80UL
-#define HARRIER_OTOFX_WPE		0x10UL
-#define HARRIER_OTOFX_SGE		0x08UL
-#define HARRIER_OTOFX_RAE		0x04UL
-#define HARRIER_OTOFX_MEM		0x02UL
-#define HARRIER_OTOFX_IOM		0x01UL
-
-/*
- * Define generic message passing register offsets
- */
-/* Mirrored registers (visible from both PowerPC and PCI space) */
-#define HARRIER_XCSR_MP_BASE_OFF	0x290	/* base offset in XCSR space */
-#define HARRIER_PMEP_MP_BASE_OFF	0x100	/* base offset in PMEM space */
-#define HARRIER_MGOM0_OFF		0x00	/* outbound msg 0 */
-#define HARRIER_MGOM1_OFF		0x04	/* outbound msg 1 */
-#define HARRIER_MGOD_OFF		0x08	/* outbound doorbells */
-
-#define HARRIER_MGIM0_OFF		0x10	/* inbound msg 0 */
-#define HARRIER_MGIM1_OFF		0x14	/* inbound msg 1 */
-#define HARRIER_MGID_OFF		0x18	/* inbound doorbells */
-
-/* PowerPC-only registers */
-#define HARRIER_MGIDM_OFF		0x20	/* inbound doorbell mask */
-
-/* PCI-only registers */
-#define HARRIER_PMEP_MGST_OFF		0x20	/* (outbound) interrupt status */
-#define HARRIER_PMEP_MGMS_OFF		0x24	/* (outbound) interrupt mask */
-#define HARRIER_MG_OMI0			(1<<4)
-#define HARRIER_MG_OMI1			(1<<5)
-
-#define HARRIER_PMEP_MGODM_OFF		0x28	/* outbound doorbell mask */
-
-/*
- * Define PCI configuration space register offsets
- */
-#define HARRIER_XCSR_TO_PCFS_OFF	0x300
-
-/*
- * Define message passing attribute register offset
- */
-#define HARRIER_MPAT_OFF		0x44
-
-/*
- * Define inbound attribute register offsets.
- */
-#define HARRIER_ITSZ0_OFF		0x48
-#define HARRIER_ITAT0_OFF		0x4c
-
-#define HARRIER_ITSZ1_OFF		0x50
-#define HARRIER_ITAT1_OFF		0x54
-
-#define HARRIER_ITSZ2_OFF		0x58
-#define HARRIER_ITAT2_OFF		0x5c
-
-#define HARRIER_ITSZ3_OFF		0x60
-#define HARRIER_ITAT3_OFF		0x64
-
-/* inbound translation size constants */
-#define HARRIER_ITSZ_MSK		0xff
-#define HARRIER_ITSZ_4KB		0x00
-#define HARRIER_ITSZ_8KB		0x01
-#define HARRIER_ITSZ_16KB		0x02
-#define HARRIER_ITSZ_32KB		0x03
-#define HARRIER_ITSZ_64KB		0x04
-#define HARRIER_ITSZ_128KB		0x05
-#define HARRIER_ITSZ_256KB		0x06
-#define HARRIER_ITSZ_512KB		0x07
-#define HARRIER_ITSZ_1MB		0x08
-#define HARRIER_ITSZ_2MB		0x09
-#define HARRIER_ITSZ_4MB		0x0A
-#define HARRIER_ITSZ_8MB		0x0B
-#define HARRIER_ITSZ_16MB		0x0C
-#define HARRIER_ITSZ_32MB		0x0D
-#define HARRIER_ITSZ_64MB		0x0E
-#define HARRIER_ITSZ_128MB		0x0F
-#define HARRIER_ITSZ_256MB		0x10
-#define HARRIER_ITSZ_512MB		0x11
-#define HARRIER_ITSZ_1GB		0x12
-#define HARRIER_ITSZ_2GB		0x13
-
-/* inbound translation offset */
-#define HARRIER_ITOF_SHIFT		0x10
-#define HARRIER_ITOF_MSK		0xffff
-
-/* inbound translation atttributes */
-#define HARRIER_ITAT_PRE		(1<<3)
-#define HARRIER_ITAT_RAE		(1<<4)
-#define HARRIER_ITAT_WPE		(1<<5)
-#define HARRIER_ITAT_MEM		(1<<6)
-#define HARRIER_ITAT_ENA		(1<<7)
-#define HARRIER_ITAT_GBL		(1<<16)
-
-#define HARRIER_LBA_OFF			0x80
-#define HARRIER_LBA_MSK			(1<<31)
-
-#define HARRIER_XCSR_SIZE		1024
-
-/* macros to calculate message passing register offsets */
-#define HARRIER_MP_XCSR(x) ((u32)HARRIER_XCSR_MP_BASE_OFF + (u32)x)
-
-#define HARRIER_MP_PMEP(x) ((u32)HARRIER_PMEP_MP_BASE_OFF + (u32)x)
-
-/*
- * Define PCI configuration space register offsets
- */
-#define HARRIER_MPBAR_OFF		PCI_BASE_ADDRESS_0
-#define HARRIER_ITBAR0_OFF		PCI_BASE_ADDRESS_1
-#define HARRIER_ITBAR1_OFF		PCI_BASE_ADDRESS_2
-#define HARRIER_ITBAR2_OFF		PCI_BASE_ADDRESS_3
-#define HARRIER_ITBAR3_OFF		PCI_BASE_ADDRESS_4
-
-#define HARRIER_XCSR_CONFIG(x) ((u32)HARRIER_XCSR_TO_PCFS_OFF + (u32)x)
-
-#endif				/* __ASMPPC_HARRIER_DEFS_H */
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 4862398e05b..bf34c5f4c05 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -39,7 +39,6 @@
 #define I2C_DRIVERID_SAA7111A	 8	/* video input processor	*/
 #define I2C_DRIVERID_SAA7185B	13	/* video encoder		*/
 #define I2C_DRIVERID_SAA7110	22	/* video decoder		*/
-#define I2C_DRIVERID_MGATVO	23	/* Matrox TVOut			*/
 #define I2C_DRIVERID_SAA5249	24	/* SAA5249 and compatibles	*/
 #define I2C_DRIVERID_PCF8583	25	/* real time clock		*/
 #define I2C_DRIVERID_SAB3036	26	/* SAB3036 tuner		*/
@@ -95,7 +94,6 @@
 #define I2C_HW_B_BT848		0x010005 /* BT848 video boards */
 #define I2C_HW_B_VIA		0x010007 /* Via vt82c586b */
 #define I2C_HW_B_HYDRA		0x010008 /* Apple Hydra Mac I/O */
-#define I2C_HW_B_G400		0x010009 /* Matrox G400 */
 #define I2C_HW_B_I810		0x01000a /* Intel I810 */
 #define I2C_HW_B_VOO		0x01000b /* 3dfx Voodoo 3 / Banshee */
 #define I2C_HW_B_SCX200		0x01000e /* Nat'l Semi SCx200 I2C */
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
index e6e9c814da6..f13255e0640 100644
--- a/include/linux/i2c-pnx.h
+++ b/include/linux/i2c-pnx.h
@@ -12,7 +12,9 @@
 #ifndef __I2C_PNX_H__
 #define __I2C_PNX_H__
 
-#include <asm/arch/i2c.h>
+#include <linux/pm.h>
+
+struct platform_device;
 
 struct i2c_pnx_mif {
 	int			ret;		/* Return value */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 08be0d21864..06115128047 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -97,7 +97,19 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
 
 /**
  * struct i2c_driver - represent an I2C device driver
+ * @id: Unique driver ID (optional)
  * @class: What kind of i2c device we instantiate (for detect)
+ * @attach_adapter: Callback for bus addition (for legacy drivers)
+ * @detach_adapter: Callback for bus removal (for legacy drivers)
+ * @detach_client: Callback for device removal (for legacy drivers)
+ * @probe: Callback for device binding (new-style drivers)
+ * @remove: Callback for device unbinding (new-style drivers)
+ * @shutdown: Callback for device shutdown
+ * @suspend: Callback for device suspend
+ * @resume: Callback for device resume
+ * @command: Callback for bus-wide signaling (optional)
+ * @driver: Device driver model driver
+ * @id_table: List of I2C devices supported by this driver
  * @detect: Callback for device detection
  * @address_data: The I2C addresses to probe, ignore or force (for detect)
  * @clients: List of detected clients we created (for i2c-core use only)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index b846bc44a27..1524829f73f 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -219,18 +219,7 @@ static inline int __ide_default_irq(unsigned long base)
 #include <asm-generic/ide_iops.h>
 #endif
 
-#ifndef MAX_HWIFS
-#if defined(CONFIG_BLACKFIN) || defined(CONFIG_H8300) || defined(CONFIG_XTENSA)
-# define MAX_HWIFS	1
-#else
-# define MAX_HWIFS	10
-#endif
-#endif
-
-#if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
-#undef MAX_HWIFS
-#define MAX_HWIFS	CONFIG_IDE_MAX_HWIFS
-#endif
+#define MAX_HWIFS	10
 
 /* Currently only m68k, apus and m8xx need it */
 #ifndef IDE_ARCH_ACK_INTR
@@ -509,24 +498,33 @@ struct ide_tp_ops {
 
 extern const struct ide_tp_ops default_tp_ops;
 
+/**
+ * struct ide_port_ops - IDE port operations
+ *
+ * @init_dev:		host specific initialization of a device
+ * @set_pio_mode:	routine to program host for PIO mode
+ * @set_dma_mode:	routine to program host for DMA mode
+ * @selectproc:		tweaks hardware to select drive
+ * @reset_poll:		chipset polling based on hba specifics
+ * @pre_reset:		chipset specific changes to default for device-hba resets
+ * @resetproc:		routine to reset controller after a disk reset
+ * @maskproc:		special host masking for drive selection
+ * @quirkproc:		check host's drive quirk list
+ *
+ * @mdma_filter:	filter MDMA modes
+ * @udma_filter:	filter UDMA modes
+ *
+ * @cable_detect:	detect cable type
+ */
 struct ide_port_ops {
-	/* host specific initialization of a device */
 	void	(*init_dev)(ide_drive_t *);
-	/* routine to program host for PIO mode */
 	void	(*set_pio_mode)(ide_drive_t *, const u8);
-	/* routine to program host for DMA mode */
 	void	(*set_dma_mode)(ide_drive_t *, const u8);
-	/* tweaks hardware to select drive */
 	void	(*selectproc)(ide_drive_t *);
-	/* chipset polling based on hba specifics */
 	int	(*reset_poll)(ide_drive_t *);
-	/* chipset specific changes to default for device-hba resets */
 	void	(*pre_reset)(ide_drive_t *);
-	/* routine to reset controller after a disk reset */
 	void	(*resetproc)(ide_drive_t *);
-	/* special host masking for drive selection */
 	void	(*maskproc)(ide_drive_t *, int);
-	/* check host's drive quirk list */
 	void	(*quirkproc)(ide_drive_t *);
 
 	u8	(*mdma_filter)(ide_drive_t *);
@@ -1113,7 +1111,6 @@ void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
 int ide_pci_set_master(struct pci_dev *, const char *);
 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
-extern const struct ide_dma_ops sff_dma_ops;
 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
 #else
@@ -1277,6 +1274,7 @@ extern int __ide_dma_end(ide_drive_t *);
 int ide_dma_test_irq(ide_drive_t *);
 extern void ide_dma_lost_irq(ide_drive_t *);
 extern void ide_dma_timeout(ide_drive_t *);
+extern const struct ide_dma_ops sff_dma_ops;
 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
 
 #else
@@ -1450,8 +1448,7 @@ static inline void ide_dump_identify(u8 *id)
 
 static inline int hwif_to_node(ide_hwif_t *hwif)
 {
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	return hwif->dev ? pcibus_to_node(dev->bus) : -1;
+	return hwif->dev ? dev_to_node(hwif->dev) : -1;
 }
 
 static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index a1630ba0b87..7f4df7c7659 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -506,6 +506,19 @@ struct ieee80211_channel_sw_ie {
 	u8 count;
 } __attribute__ ((packed));
 
+/**
+ * struct ieee80211_tim
+ *
+ * This structure refers to "Traffic Indication Map information element"
+ */
+struct ieee80211_tim_ie {
+	u8 dtim_count;
+	u8 dtim_period;
+	u8 bitmap_ctrl;
+	/* variable size: 1 - 251 bytes */
+	u8 virtual_map[0];
+} __attribute__ ((packed));
+
 struct ieee80211_mgmt {
 	__le16 frame_control;
 	__le16 duration;
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 4c6307ad9fd..8529f57ba26 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -45,6 +45,7 @@
 #define TUNGETFEATURES _IOR('T', 207, unsigned int)
 #define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
 #define TUNSETTXFILTER _IOW('T', 209, unsigned int)
+#define TUNGETIFF      _IOR('T', 210, unsigned int)
 
 /* TUNSETIFF ifr flags */
 #define IFF_TUN		0x0001
diff --git a/include/linux/ihex.h b/include/linux/ihex.h
index 2baace2788a..31d8629e75a 100644
--- a/include/linux/ihex.h
+++ b/include/linux/ihex.h
@@ -18,7 +18,7 @@ struct ihex_binrec {
 	__be32 addr;
 	__be16 len;
 	uint8_t data[0];
-} __attribute__((aligned(4)));
+} __attribute__((packed));
 
 /* Find the next record, taking into account the 4-byte alignment */
 static inline const struct ihex_binrec *
diff --git a/include/linux/init.h b/include/linux/init.h
index 11b84e10605..93538b696e3 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -139,6 +139,7 @@ extern initcall_t __con_initcall_start[], __con_initcall_end[];
 extern initcall_t __security_initcall_start[], __security_initcall_end[];
 
 /* Defined in init/main.c */
+extern int do_one_initcall(initcall_t fn);
 extern char __initdata boot_command_line[];
 extern char *saved_command_line;
 extern unsigned int reset_devices;
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 62aa4f895ab..58ff4e74b2f 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -223,35 +223,6 @@ static inline int disable_irq_wake(unsigned int irq)
 #define or_softirq_pending(x)  (local_softirq_pending() |= (x))
 #endif
 
-/*
- * Temporary defines for UP kernels, until all code gets fixed.
- */
-#ifndef CONFIG_SMP
-static inline void __deprecated cli(void)
-{
-	local_irq_disable();
-}
-static inline void __deprecated sti(void)
-{
-	local_irq_enable();
-}
-static inline void __deprecated save_flags(unsigned long *x)
-{
-	local_save_flags(*x);
-}
-#define save_flags(x) save_flags(&x)
-static inline void __deprecated restore_flags(unsigned long x)
-{
-	local_irq_restore(x);
-}
-
-static inline void __deprecated save_and_cli(unsigned long *x)
-{
-	local_irq_save(*x);
-}
-#define save_and_cli(x)	save_and_cli(&x)
-#endif /* CONFIG_SMP */
-
 /* Some architectures might implement lazy enabling/disabling of
  * interrupts. In some cases, such as stop_machine, we might want
  * to ensure that after a local_irq_disable(), interrupts have
diff --git a/include/linux/iommu-helper.h b/include/linux/iommu-helper.h
index f8598f58394..c975caf7538 100644
--- a/include/linux/iommu-helper.h
+++ b/include/linux/iommu-helper.h
@@ -8,4 +8,3 @@ extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
 				      unsigned long align_mask);
 extern void iommu_area_free(unsigned long *map, unsigned long start,
 			    unsigned int nr);
-extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 2cd07cc2968..350033e8f4e 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -109,6 +109,7 @@ extern struct resource iomem_resource;
 extern int request_resource(struct resource *root, struct resource *new);
 extern int release_resource(struct resource *new);
 extern int insert_resource(struct resource *parent, struct resource *new);
+extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
 extern int allocate_resource(struct resource *root, struct resource *new,
 			     resource_size_t size, resource_size_t min,
 			     resource_size_t max, resource_size_t align,
@@ -118,6 +119,10 @@ extern int allocate_resource(struct resource *root, struct resource *new,
 int adjust_resource(struct resource *res, resource_size_t start,
 		    resource_size_t size);
 resource_size_t resource_alignment(struct resource *res);
+static inline resource_size_t resource_size(struct resource *res)
+{
+	return res->end - res->start + 1;
+}
 
 /* Convenience shorthand with allocation */
 #define request_region(start,n,name)	__request_region(&ioport_resource, (start), (n), (name))
@@ -154,9 +159,9 @@ extern struct resource * __devm_request_region(struct device *dev,
 				struct resource *parent, resource_size_t start,
 				resource_size_t n, const char *name);
 
-#define devm_release_region(start,n) \
+#define devm_release_region(dev, start, n) \
 	__devm_release_region(dev, &ioport_resource, (start), (n))
-#define devm_release_mem_region(start,n) \
+#define devm_release_mem_region(dev, start, n) \
 	__devm_release_region(dev, &iomem_resource, (start), (n))
 
 extern void __devm_release_region(struct device *dev, struct resource *parent,
diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h
new file mode 100644
index 00000000000..ec6eb49af2d
--- /dev/null
+++ b/include/linux/ip_vs.h
@@ -0,0 +1,245 @@
+/*
+ *      IP Virtual Server
+ *      data structure and functionality definitions
+ */
+
+#ifndef _IP_VS_H
+#define _IP_VS_H
+
+#include <linux/types.h>	/* For __beXX types in userland */
+
+#define IP_VS_VERSION_CODE	0x010201
+#define NVERSION(version)			\
+	(version >> 16) & 0xFF,			\
+	(version >> 8) & 0xFF,			\
+	version & 0xFF
+
+/*
+ *      Virtual Service Flags
+ */
+#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
+#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
+
+/*
+ *      Destination Server Flags
+ */
+#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
+#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
+
+/*
+ *      IPVS sync daemon states
+ */
+#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
+#define IP_VS_STATE_MASTER	0x0001		/* started as master */
+#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
+
+/*
+ *      IPVS socket options
+ */
+#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
+
+#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
+#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
+#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
+#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
+#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
+#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
+#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
+#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
+#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
+#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
+#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
+
+#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
+#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
+#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
+
+
+/*
+ *      IPVS Connection Flags
+ */
+#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
+#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
+#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
+#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
+#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
+#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
+#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
+#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
+#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
+#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
+#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
+#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
+#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
+#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
+#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
+
+#define IP_VS_SCHEDNAME_MAXLEN	16
+#define IP_VS_IFNAME_MAXLEN	16
+
+
+/*
+ *	The struct ip_vs_service_user and struct ip_vs_dest_user are
+ *	used to set IPVS rules through setsockopt.
+ */
+struct ip_vs_service_user {
+	/* virtual service addresses */
+	u_int16_t		protocol;
+	__be32			addr;		/* virtual ip address */
+	__be16			port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* virtual service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned		flags;		/* virtual service flags */
+	unsigned		timeout;	/* persistent timeout in sec */
+	__be32			netmask;	/* persistent netmask */
+};
+
+
+struct ip_vs_dest_user {
+	/* destination server address */
+	__be32			addr;
+	__be16			port;
+
+	/* real server options */
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	/* thresholds for active connections */
+	u_int32_t		u_threshold;	/* upper threshold */
+	u_int32_t		l_threshold;	/* lower threshold */
+};
+
+
+/*
+ *	IPVS statistics object (for user space)
+ */
+struct ip_vs_stats_user
+{
+	__u32                   conns;          /* connections scheduled */
+	__u32                   inpkts;         /* incoming packets */
+	__u32                   outpkts;        /* outgoing packets */
+	__u64                   inbytes;        /* incoming bytes */
+	__u64                   outbytes;       /* outgoing bytes */
+
+	__u32			cps;		/* current connection rate */
+	__u32			inpps;		/* current in packet rate */
+	__u32			outpps;		/* current out packet rate */
+	__u32			inbps;		/* current in byte rate */
+	__u32			outbps;		/* current out byte rate */
+};
+
+
+/* The argument to IP_VS_SO_GET_INFO */
+struct ip_vs_getinfo {
+	/* version number */
+	unsigned int		version;
+
+	/* size of connection hash table */
+	unsigned int		size;
+
+	/* number of virtual services */
+	unsigned int		num_services;
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICE */
+struct ip_vs_service_entry {
+	/* which service: user fills in these */
+	u_int16_t		protocol;
+	__be32			addr;		/* virtual address */
+	__be16			port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned		flags;          /* virtual service flags */
+	unsigned		timeout;	/* persistent timeout */
+	__be32			netmask;	/* persistent netmask */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+struct ip_vs_dest_entry {
+	__be32			addr;		/* destination address */
+	__be16			port;
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	u_int32_t		u_threshold;	/* upper threshold */
+	u_int32_t		l_threshold;	/* lower threshold */
+
+	u_int32_t		activeconns;	/* active connections */
+	u_int32_t		inactconns;	/* inactive connections */
+	u_int32_t		persistconns;	/* persistent connections */
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+/* The argument to IP_VS_SO_GET_DESTS */
+struct ip_vs_get_dests {
+	/* which service: user fills in these */
+	u_int16_t		protocol;
+	__be32			addr;		/* virtual address */
+	__be16			port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* the real servers */
+	struct ip_vs_dest_entry	entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICES */
+struct ip_vs_get_services {
+	/* number of virtual services */
+	unsigned int		num_services;
+
+	/* service table */
+	struct ip_vs_service_entry entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_TIMEOUT */
+struct ip_vs_timeout_user {
+	int			tcp_timeout;
+	int			tcp_fin_timeout;
+	int			udp_timeout;
+};
+
+
+/* The argument to IP_VS_SO_GET_DAEMON */
+struct ip_vs_daemon_user {
+	/* sync daemon state (master/backup) */
+	int			state;
+
+	/* multicast interface name */
+	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
+
+	/* SyncID we belong to */
+	int			syncid;
+};
+
+#endif	/* _IP_VS_H */
diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h
index 794b8daa937..17ca64b5a66 100644
--- a/include/linux/ivtv.h
+++ b/include/linux/ivtv.h
@@ -21,11 +21,7 @@
 #ifndef __LINUX_IVTV_H__
 #define __LINUX_IVTV_H__
 
-#ifdef __KERNEL__
-#include <linux/compiler.h> /* need __user */
-#else
-#define __user
-#endif
+#include <linux/compiler.h>
 #include <linux/types.h>
 
 /* ivtv knows several distinct output modes: MPEG streaming,
diff --git a/include/linux/ivtvfb.h b/include/linux/ivtvfb.h
index e980ba62ddc..e20af47b59a 100644
--- a/include/linux/ivtvfb.h
+++ b/include/linux/ivtvfb.h
@@ -21,11 +21,7 @@
 #ifndef __LINUX_IVTVFB_H__
 #define __LINUX_IVTVFB_H__
 
-#ifdef __KERNEL__
-#include <linux/compiler.h> /* need __user */
-#else
-#define __user
-#endif
+#include <linux/compiler.h>
 #include <linux/types.h>
 
 /* Framebuffer external API */
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index 57aefa160a9..b9614488744 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -108,8 +108,7 @@ static inline void print_fn_descriptor_symbol(const char *fmt, void *addr)
 
 static inline void print_ip_sym(unsigned long ip)
 {
-	printk("[<%p>]", (void *) ip);
-	print_symbol(" %s\n", ip);
+	printk("[<%p>] %pS\n", (void *) ip, (void *) ip);
 }
 
 #endif /*_LINUX_KALLSYMS_H*/
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fdbbf72ca2e..2651f805ba6 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -75,6 +75,12 @@ extern const char linux_proc_banner[];
  */
 #define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
 
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((u32)(n))
+
 #define	KERN_EMERG	"<0>"	/* system is unusable			*/
 #define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
 #define	KERN_CRIT	"<2>"	/* critical conditions			*/
@@ -102,6 +108,13 @@ struct completion;
 struct pt_regs;
 struct user;
 
+#ifdef CONFIG_PREEMPT_VOLUNTARY
+extern int _cond_resched(void);
+# define might_resched() _cond_resched()
+#else
+# define might_resched() do { } while (0)
+#endif
+
 /**
  * might_sleep - annotation for functions that can sleep
  *
@@ -112,13 +125,6 @@ struct user;
  * be bitten later when the calling function happens to sleep when it is not
  * supposed to.
  */
-#ifdef CONFIG_PREEMPT_VOLUNTARY
-extern int _cond_resched(void);
-# define might_resched() _cond_resched()
-#else
-# define might_resched() do { } while (0)
-#endif
-
 #ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
   void __might_sleep(char *file, int line);
 # define might_sleep() \
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 82f88a8a827..17f76fc0517 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -25,8 +25,8 @@
 #error KEXEC_CONTROL_MEMORY_LIMIT not defined
 #endif
 
-#ifndef KEXEC_CONTROL_CODE_SIZE
-#error KEXEC_CONTROL_CODE_SIZE not defined
+#ifndef KEXEC_CONTROL_PAGE_SIZE
+#error KEXEC_CONTROL_PAGE_SIZE not defined
 #endif
 
 #ifndef KEXEC_ARCH
@@ -130,8 +130,8 @@ void vmcoreinfo_append_str(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
 unsigned long paddr_vmcoreinfo_note(void);
 
-#define VMCOREINFO_OSRELEASE(name) \
-	vmcoreinfo_append_str("OSRELEASE=%s\n", #name)
+#define VMCOREINFO_OSRELEASE(value) \
+	vmcoreinfo_append_str("OSRELEASE=%s\n", value)
 #define VMCOREINFO_PAGESIZE(value) \
 	vmcoreinfo_append_str("PAGESIZE=%ld\n", value)
 #define VMCOREINFO_SYMBOL(name) \
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 0ea064cbfbc..70a30651cd1 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -320,12 +320,12 @@ struct kvm_trace_rec {
 		struct {
 			__u64 cycle_u64;
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
-		} cycle;
+		} __attribute__((packed)) cycle;
 		struct {
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
 		} nocycle;
 	} u;
-} __attribute__((packed));
+};
 
 #define KVMIO 0xAE
 
@@ -371,6 +371,7 @@ struct kvm_trace_rec {
 #define KVM_CAP_PV_MMU 13
 #define KVM_CAP_MP_STATE 14
 #define KVM_CAP_COALESCED_MMIO 15
+#define KVM_CAP_SYNC_MMU 16  /* Changes to host mmap are reflected in guest */
 
 /*
  * ioctls for VM fds
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 07d68a8ae8e..8525afc5310 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -121,6 +121,12 @@ struct kvm {
 	struct kvm_coalesced_mmio_dev *coalesced_mmio_dev;
 	struct kvm_coalesced_mmio_ring *coalesced_mmio_ring;
 #endif
+
+#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
+	struct mmu_notifier mmu_notifier;
+	unsigned long mmu_notifier_seq;
+	long mmu_notifier_count;
+#endif
 };
 
 /* The guest did something we don't support. */
@@ -332,4 +338,22 @@ int kvm_trace_ioctl(unsigned int ioctl, unsigned long arg)
 #define kvm_trace_cleanup() ((void)0)
 #endif
 
+#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
+static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq)
+{
+	if (unlikely(vcpu->kvm->mmu_notifier_count))
+		return 1;
+	/*
+	 * Both reads happen under the mmu_lock and both values are
+	 * modified under mmu_lock, so there's no need of smb_rmb()
+	 * here in between, otherwise mmu_notifier_count should be
+	 * read before mmu_notifier_seq, see
+	 * mmu_notifier_invalidate_range_end write side.
+	 */
+	if (vcpu->kvm->mmu_notifier_seq != mmu_seq)
+		return 1;
+	return 0;
+}
+#endif
+
 #endif
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5b247b8a6b3..225bfc5bd9e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -60,9 +60,9 @@
 
 /* note: prints function name for you */
 #ifdef ATA_DEBUG
-#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #ifdef ATA_VERBOSE_DEBUG
-#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #else
 #define VPRINTK(fmt, args...)
 #endif	/* ATA_VERBOSE_DEBUG */
@@ -71,7 +71,7 @@
 #define VPRINTK(fmt, args...)
 #endif	/* ATA_DEBUG */
 
-#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 
 /* NEW: debug levels */
 #define HAVE_LIBATA_MSG 1
@@ -163,6 +163,7 @@ enum {
 	ATA_DEV_NONE		= 9,	/* no device */
 
 	/* struct ata_link flags */
+	ATA_LFLAG_NO_HRST	= (1 << 1), /* avoid hardreset */
 	ATA_LFLAG_NO_SRST	= (1 << 2), /* avoid softreset */
 	ATA_LFLAG_ASSUME_ATA	= (1 << 3), /* assume ATA class */
 	ATA_LFLAG_ASSUME_SEMB	= (1 << 4), /* assume SEMB class */
@@ -646,6 +647,7 @@ struct ata_link {
 
 	unsigned int		flags;		/* ATA_LFLAG_xxx */
 
+	u32			saved_scontrol;	/* SControl on probe */
 	unsigned int		hw_sata_spd_limit;
 	unsigned int		sata_spd_limit;
 	unsigned int		sata_spd;	/* current SATA PHY speed */
@@ -750,6 +752,7 @@ struct ata_port_operations {
 	void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
 	void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
 	int  (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
+	unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id);
 
 	void (*dev_config)(struct ata_device *dev);
 
@@ -951,6 +954,8 @@ extern void ata_id_string(const u16 *id, unsigned char *s,
 			  unsigned int ofs, unsigned int len);
 extern void ata_id_c_string(const u16 *id, unsigned char *s,
 			    unsigned int ofs, unsigned int len);
+extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
+					struct ata_taskfile *tf, u16 *id);
 extern void ata_qc_complete(struct ata_queued_cmd *qc);
 extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
 extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
@@ -1424,6 +1429,28 @@ static inline unsigned long ata_deadline(unsigned long from_jiffies,
 	return from_jiffies + msecs_to_jiffies(timeout_msecs);
 }
 
+/* Don't open code these in drivers as there are traps. Firstly the range may
+   change in future hardware and specs, secondly 0xFF means 'no DMA' but is
+   > UDMA_0. Dyma ddreigiau */
+
+static inline int ata_using_mwdma(struct ata_device *adev)
+{
+	if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4)
+		return 1;
+	return 0;
+}
+
+static inline int ata_using_udma(struct ata_device *adev)
+{
+	if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7)
+		return 1;
+	return 0;
+}
+
+static inline int ata_dma_enabled(struct ata_device *adev)
+{
+	return (adev->dma_mode == 0xFF ? 0 : 1);
+}
 
 /**************************************************************************
  * PMP - drivers/ata/libata-pmp.c
diff --git a/include/linux/list.h b/include/linux/list.h
index 453916bc041..969f6e92d08 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -214,22 +214,62 @@ static inline int list_is_singular(const struct list_head *head)
 	return !list_empty(head) && (head->next == head->prev);
 }
 
+static inline void __list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	struct list_head *new_first = entry->next;
+	list->next = head->next;
+	list->next->prev = list;
+	list->prev = entry;
+	entry->next = list;
+	head->next = new_first;
+	new_first->prev = head;
+}
+
+/**
+ * list_cut_position - cut a list into two
+ * @list: a new list to add all removed entries
+ * @head: a list with entries
+ * @entry: an entry within head, could be the head itself
+ *	and if so we won't cut the list
+ *
+ * This helper moves the initial part of @head, up to and
+ * including @entry, from @head to @list. You should
+ * pass on @entry an element you know is on @head. @list
+ * should be an empty list or a list you do not care about
+ * losing its data.
+ *
+ */
+static inline void list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	if (list_empty(head))
+		return;
+	if (list_is_singular(head) &&
+		(head->next != entry && head != entry))
+		return;
+	if (entry == head)
+		INIT_LIST_HEAD(list);
+	else
+		__list_cut_position(list, head, entry);
+}
+
 static inline void __list_splice(const struct list_head *list,
-				 struct list_head *head)
+				 struct list_head *prev,
+				 struct list_head *next)
 {
 	struct list_head *first = list->next;
 	struct list_head *last = list->prev;
-	struct list_head *at = head->next;
 
-	first->prev = head;
-	head->next = first;
+	first->prev = prev;
+	prev->next = first;
 
-	last->next = at;
-	at->prev = last;
+	last->next = next;
+	next->prev = last;
 }
 
 /**
- * list_splice - join two lists
+ * list_splice - join two lists, this is designed for stacks
  * @list: the new list to add.
  * @head: the place to add it in the first list.
  */
@@ -237,7 +277,19 @@ static inline void list_splice(const struct list_head *list,
 				struct list_head *head)
 {
 	if (!list_empty(list))
-		__list_splice(list, head);
+		__list_splice(list, head, head->next);
+}
+
+/**
+ * list_splice_tail - join two lists, each list being a queue
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice_tail(struct list_head *list,
+				struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head->prev, head);
 }
 
 /**
@@ -251,7 +303,24 @@ static inline void list_splice_init(struct list_head *list,
 				    struct list_head *head)
 {
 	if (!list_empty(list)) {
-		__list_splice(list, head);
+		__list_splice(list, head, head->next);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+/**
+ * list_splice_tail_init - join two lists and reinitialise the emptied list
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * Each of the lists is a queue.
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_tail_init(struct list_head *list,
+					 struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head->prev, head);
 		INIT_LIST_HEAD(list);
 	}
 }
@@ -550,6 +619,19 @@ static inline void hlist_add_after(struct hlist_node *n,
 		next->next->pprev  = &next->next;
 }
 
+/*
+ * Move a list from one list head to another. Fixup the pprev
+ * reference of the first entry if it exists.
+ */
+static inline void hlist_move_list(struct hlist_head *old,
+				   struct hlist_head *new)
+{
+	new->first = old->first;
+	if (new->first)
+		new->first->pprev = &new->first;
+	old->first = NULL;
+}
+
 #define hlist_entry(ptr, type, member) container_of(ptr,type,member)
 
 #define hlist_for_each(pos, head) \
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index 2486eb4edbf..331e5f1c2d8 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -89,6 +89,7 @@ struct lock_class {
 
 	struct lockdep_subclass_key	*key;
 	unsigned int			subclass;
+	unsigned int			dep_gen_id;
 
 	/*
 	 * IRQ/softirq usage tracking bits:
@@ -189,6 +190,14 @@ struct lock_chain {
 	u64				chain_key;
 };
 
+#define MAX_LOCKDEP_KEYS_BITS		13
+/*
+ * Subtract one because we offset hlock->class_idx by 1 in order
+ * to make 0 mean no class. This avoids overflowing the class_idx
+ * bitfield and hitting the BUG in hlock_class().
+ */
+#define MAX_LOCKDEP_KEYS		((1UL << MAX_LOCKDEP_KEYS_BITS) - 1)
+
 struct held_lock {
 	/*
 	 * One-way hash of the dependency chain up to this point. We
@@ -205,14 +214,14 @@ struct held_lock {
 	 * with zero), here we store the previous hash value:
 	 */
 	u64				prev_chain_key;
-	struct lock_class		*class;
 	unsigned long			acquire_ip;
 	struct lockdep_map		*instance;
-
+	struct lockdep_map		*nest_lock;
 #ifdef CONFIG_LOCK_STAT
 	u64 				waittime_stamp;
 	u64				holdtime_stamp;
 #endif
+	unsigned int			class_idx:MAX_LOCKDEP_KEYS_BITS;
 	/*
 	 * The lock-stack is unified in that the lock chains of interrupt
 	 * contexts nest ontop of process context chains, but we 'separate'
@@ -226,11 +235,11 @@ struct held_lock {
 	 * The following field is used to detect when we cross into an
 	 * interrupt context:
 	 */
-	int				irq_context;
-	int				trylock;
-	int				read;
-	int				check;
-	int				hardirqs_off;
+	unsigned int irq_context:2; /* bit 0 - soft, bit 1 - hard */
+	unsigned int trylock:1;
+	unsigned int read:2;        /* see lock_acquire() comment */
+	unsigned int check:2;       /* see lock_acquire() comment */
+	unsigned int hardirqs_off:1;
 };
 
 /*
@@ -294,11 +303,15 @@ extern void lockdep_init_map(struct lockdep_map *lock, const char *name,
  *   2: full validation
  */
 extern void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
-			 int trylock, int read, int check, unsigned long ip);
+			 int trylock, int read, int check,
+			 struct lockdep_map *nest_lock, unsigned long ip);
 
 extern void lock_release(struct lockdep_map *lock, int nested,
 			 unsigned long ip);
 
+extern void lock_set_subclass(struct lockdep_map *lock, unsigned int subclass,
+			      unsigned long ip);
+
 # define INIT_LOCKDEP				.lockdep_recursion = 0,
 
 #define lockdep_depth(tsk)	(debug_locks ? (tsk)->lockdep_depth : 0)
@@ -313,8 +326,9 @@ static inline void lockdep_on(void)
 {
 }
 
-# define lock_acquire(l, s, t, r, c, i)		do { } while (0)
+# define lock_acquire(l, s, t, r, c, n, i)	do { } while (0)
 # define lock_release(l, n, i)			do { } while (0)
+# define lock_set_subclass(l, s, i)		do { } while (0)
 # define lockdep_init()				do { } while (0)
 # define lockdep_info()				do { } while (0)
 # define lockdep_init_map(lock, name, key, sub)	do { (void)(key); } while (0)
@@ -400,9 +414,11 @@ static inline void print_irqtrace_events(struct task_struct *curr)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 # ifdef CONFIG_PROVE_LOCKING
-#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, i)
+#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
+#  define spin_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 2, n, i)
 # else
-#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, i)
+#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
+#  define spin_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 1, NULL, i)
 # endif
 # define spin_release(l, n, i)			lock_release(l, n, i)
 #else
@@ -412,11 +428,11 @@ static inline void print_irqtrace_events(struct task_struct *curr)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 # ifdef CONFIG_PROVE_LOCKING
-#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, i)
-#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 2, i)
+#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
+#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 2, NULL, i)
 # else
-#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, i)
-#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 1, i)
+#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
+#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 1, NULL, i)
 # endif
 # define rwlock_release(l, n, i)		lock_release(l, n, i)
 #else
@@ -427,9 +443,9 @@ static inline void print_irqtrace_events(struct task_struct *curr)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 # ifdef CONFIG_PROVE_LOCKING
-#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, i)
+#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
 # else
-#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, i)
+#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
 # endif
 # define mutex_release(l, n, i)			lock_release(l, n, i)
 #else
@@ -439,11 +455,11 @@ static inline void print_irqtrace_events(struct task_struct *curr)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 # ifdef CONFIG_PROVE_LOCKING
-#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, i)
-#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 2, i)
+#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
+#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 2, NULL, i)
 # else
-#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, i)
-#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 1, i)
+#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
+#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 1, NULL, i)
 # endif
 # define rwsem_release(l, n, i)			lock_release(l, n, i)
 #else
@@ -452,4 +468,16 @@ static inline void print_irqtrace_events(struct task_struct *curr)
 # define rwsem_release(l, n, i)			do { } while (0)
 #endif
 
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# ifdef CONFIG_PROVE_LOCKING
+#  define lock_map_acquire(l)		lock_acquire(l, 0, 0, 0, 2, NULL, _THIS_IP_)
+# else
+#  define lock_map_acquire(l)		lock_acquire(l, 0, 0, 0, 1, NULL, _THIS_IP_)
+# endif
+# define lock_map_release(l)			lock_release(l, 1, _THIS_IP_)
+#else
+# define lock_map_acquire(l)			do { } while (0)
+# define lock_map_release(l)			do { } while (0)
+#endif
+
 #endif /* __LINUX_LOCKDEP_H */
diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
index 5c948f33781..8f2d60da04e 100644
--- a/include/linux/mISDNif.h
+++ b/include/linux/mISDNif.h
@@ -37,7 +37,7 @@
  */
 #define	MISDN_MAJOR_VERSION	1
 #define	MISDN_MINOR_VERSION	0
-#define MISDN_RELEASE		18
+#define MISDN_RELEASE		19
 
 /* primitives for information exchange
  * generell format
@@ -242,7 +242,8 @@ struct mISDNhead {
 #define TEI_SAPI		63
 #define CTRL_SAPI		0
 
-#define MISDN_CHMAP_SIZE	4
+#define MISDN_MAX_CHANNEL	127
+#define MISDN_CHMAP_SIZE	((MISDN_MAX_CHANNEL + 1) >> 3)
 
 #define SOL_MISDN	0
 
@@ -275,11 +276,32 @@ struct mISDN_devinfo {
 	u_int			Dprotocols;
 	u_int			Bprotocols;
 	u_int			protocol;
-	u_long			channelmap[MISDN_CHMAP_SIZE];
+	u_char			channelmap[MISDN_CHMAP_SIZE];
 	u_int			nrbchan;
 	char			name[MISDN_MAX_IDLEN];
 };
 
+static inline int
+test_channelmap(u_int nr, u_char *map)
+{
+	if (nr <= MISDN_MAX_CHANNEL)
+		return map[nr >> 3] & (1 << (nr & 7));
+	else
+		return 0;
+}
+
+static inline void
+set_channelmap(u_int nr, u_char *map)
+{
+	map[nr >> 3] |= (1 << (nr & 7));
+}
+
+static inline void
+clear_channelmap(u_int nr, u_char *map)
+{
+	map[nr >> 3] &= ~(1 << (nr & 7));
+}
+
 /* CONTROL_CHANNEL parameters */
 #define MISDN_CTRL_GETOP		0x0000
 #define MISDN_CTRL_LOOP			0x0001
@@ -405,7 +427,7 @@ struct mISDNdevice {
 	u_int			Dprotocols;
 	u_int			Bprotocols;
 	u_int			nrbchan;
-	u_long			channelmap[MISDN_CHMAP_SIZE];
+	u_char			channelmap[MISDN_CHMAP_SIZE];
 	struct list_head	bchannels;
 	struct mISDNchannel	*teimgr;
 	struct device		dev;
@@ -430,7 +452,7 @@ struct mISDNstack {
 #endif
 };
 
-/* global alloc/queue dunctions */
+/* global alloc/queue functions */
 
 static inline struct sk_buff *
 mI_alloc_skb(unsigned int len, gfp_t gfp_mask)
diff --git a/include/linux/maple.h b/include/linux/maple.h
index 523a286bb47..c23d3f51ba4 100644
--- a/include/linux/maple.h
+++ b/include/linux/maple.h
@@ -2,6 +2,7 @@
 #define __LINUX_MAPLE_H
 
 #include <linux/device.h>
+#include <mach/maple.h>
 
 extern struct bus_type maple_bus_type;
 
@@ -33,6 +34,7 @@ struct mapleq {
 	void *sendbuf, *recvbuf, *recvbufdcsp;
 	unsigned char length;
 	enum maple_code command;
+	struct mutex mutex;
 };
 
 struct maple_devinfo {
@@ -49,7 +51,6 @@ struct maple_devinfo {
 struct maple_device {
 	struct maple_driver *driver;
 	struct mapleq *mq;
-	void *private_data;
 	void (*callback) (struct mapleq * mq);
 	unsigned long when, interval, function;
 	struct maple_devinfo devinfo;
@@ -68,10 +69,17 @@ void maple_getcond_callback(struct maple_device *dev,
 			    void (*callback) (struct mapleq * mq),
 			    unsigned long interval,
 			    unsigned long function);
-int maple_driver_register(struct device_driver *drv);
-void maple_add_packet(struct mapleq *mq);
+int maple_driver_register(struct maple_driver *);
+void maple_driver_unregister(struct maple_driver *);
+
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+	u32 command, u32 length, void *data);
+void maple_clear_dev(struct maple_device *mdev);
 
 #define to_maple_dev(n) container_of(n, struct maple_device, dev)
 #define to_maple_driver(n) container_of(n, struct maple_driver, drv)
 
+#define maple_get_drvdata(d)		dev_get_drvdata(&(d)->dev)
+#define maple_set_drvdata(d,p)		dev_set_drvdata(&(d)->dev, (p))
+
 #endif				/* __LINUX_MAPLE_H */
diff --git a/include/linux/memstick.h b/include/linux/memstick.h
index a9f998a3f48..d0c37e68223 100644
--- a/include/linux/memstick.h
+++ b/include/linux/memstick.h
@@ -21,30 +21,30 @@
 struct ms_status_register {
 	unsigned char reserved;
 	unsigned char interrupt;
-#define MEMSTICK_INT_CMDNAK             0x0001
-#define MEMSTICK_INT_IOREQ              0x0008
-#define MEMSTICK_INT_IOBREQ             0x0010
-#define MEMSTICK_INT_BREQ               0x0020
-#define MEMSTICK_INT_ERR                0x0040
-#define MEMSTICK_INT_CED                0x0080
+#define MEMSTICK_INT_CMDNAK 0x01
+#define MEMSTICK_INT_IOREQ  0x08
+#define MEMSTICK_INT_IOBREQ 0x10
+#define MEMSTICK_INT_BREQ   0x20
+#define MEMSTICK_INT_ERR    0x40
+#define MEMSTICK_INT_CED    0x80
 
 	unsigned char status0;
-#define MEMSTICK_STATUS0_WP             0x0001
-#define MEMSTICK_STATUS0_SL             0x0002
-#define MEMSTICK_STATUS0_BF             0x0010
-#define MEMSTICK_STATUS0_BE             0x0020
-#define MEMSTICK_STATUS0_FB0            0x0040
-#define MEMSTICK_STATUS0_MB             0x0080
+#define MEMSTICK_STATUS0_WP  0x01
+#define MEMSTICK_STATUS0_SL  0x02
+#define MEMSTICK_STATUS0_BF  0x10
+#define MEMSTICK_STATUS0_BE  0x20
+#define MEMSTICK_STATUS0_FB0 0x40
+#define MEMSTICK_STATUS0_MB  0x80
 
 	unsigned char status1;
-#define MEMSTICK_STATUS1_UCFG           0x0001
-#define MEMSTICK_STATUS1_FGER           0x0002
-#define MEMSTICK_STATUS1_UCEX           0x0004
-#define MEMSTICK_STATUS1_EXER           0x0008
-#define MEMSTICK_STATUS1_UCDT           0x0010
-#define MEMSTICK_STATUS1_DTER           0x0020
-#define MEMSTICK_STATUS1_FBI            0x0040
-#define MEMSTICK_STATUS1_MB             0x0080
+#define MEMSTICK_STATUS1_UCFG 0x01
+#define MEMSTICK_STATUS1_FGER 0x02
+#define MEMSTICK_STATUS1_UCEX 0x04
+#define MEMSTICK_STATUS1_EXER 0x08
+#define MEMSTICK_STATUS1_UCDT 0x10
+#define MEMSTICK_STATUS1_DTER 0x20
+#define MEMSTICK_STATUS1_FB1  0x40
+#define MEMSTICK_STATUS1_MB   0x80
 } __attribute__((packed));
 
 struct ms_id_register {
@@ -56,32 +56,32 @@ struct ms_id_register {
 
 struct ms_param_register {
 	unsigned char system;
-#define MEMSTICK_SYS_ATEN 0xc0
-#define MEMSTICK_SYS_BAMD 0x80
 #define MEMSTICK_SYS_PAM  0x08
+#define MEMSTICK_SYS_BAMD 0x80
 
 	unsigned char block_address_msb;
 	unsigned short block_address;
 	unsigned char cp;
-#define MEMSTICK_CP_BLOCK               0x0000
-#define MEMSTICK_CP_PAGE                0x0020
-#define MEMSTICK_CP_EXTRA               0x0040
-#define MEMSTICK_CP_OVERWRITE           0x0080
+#define MEMSTICK_CP_BLOCK     0x00
+#define MEMSTICK_CP_PAGE      0x20
+#define MEMSTICK_CP_EXTRA     0x40
+#define MEMSTICK_CP_OVERWRITE 0x80
 
 	unsigned char page_address;
 } __attribute__((packed));
 
 struct ms_extra_data_register {
 	unsigned char  overwrite_flag;
-#define MEMSTICK_OVERWRITE_UPDATA       0x0010
-#define MEMSTICK_OVERWRITE_PAGE         0x0060
-#define MEMSTICK_OVERWRITE_BLOCK        0x0080
+#define MEMSTICK_OVERWRITE_UDST  0x10
+#define MEMSTICK_OVERWRITE_PGST1 0x20
+#define MEMSTICK_OVERWRITE_PGST0 0x40
+#define MEMSTICK_OVERWRITE_BKST  0x80
 
 	unsigned char  management_flag;
-#define MEMSTICK_MANAGEMENT_SYSTEM      0x0004
-#define MEMSTICK_MANAGEMENT_TRANS_TABLE 0x0008
-#define MEMSTICK_MANAGEMENT_COPY        0x0010
-#define MEMSTICK_MANAGEMENT_ACCESS      0x0020
+#define MEMSTICK_MANAGEMENT_SYSFLG 0x04
+#define MEMSTICK_MANAGEMENT_ATFLG  0x08
+#define MEMSTICK_MANAGEMENT_SCMS1  0x10
+#define MEMSTICK_MANAGEMENT_SCMS0  0x20
 
 	unsigned short logical_address;
 } __attribute__((packed));
@@ -96,9 +96,9 @@ struct ms_register {
 
 struct mspro_param_register {
 	unsigned char  system;
-#define MEMSTICK_SYS_SERIAL 0x80
 #define MEMSTICK_SYS_PAR4   0x00
 #define MEMSTICK_SYS_PAR8   0x40
+#define MEMSTICK_SYS_SERIAL 0x80
 
 	unsigned short data_count;
 	unsigned int   data_address;
@@ -147,7 +147,7 @@ struct ms_register_addr {
 	unsigned char w_length;
 } __attribute__((packed));
 
-enum {
+enum memstick_tpc {
 	MS_TPC_READ_MG_STATUS   = 0x01,
 	MS_TPC_READ_LONG_DATA   = 0x02,
 	MS_TPC_READ_SHORT_DATA  = 0x03,
@@ -167,7 +167,7 @@ enum {
 	MS_TPC_SET_CMD          = 0x0e
 };
 
-enum {
+enum memstick_command {
 	MS_CMD_BLOCK_END       = 0x33,
 	MS_CMD_RESET           = 0x3c,
 	MS_CMD_BLOCK_WRITE     = 0x55,
@@ -201,8 +201,6 @@ enum {
 
 /*** Driver structures and functions ***/
 
-#define MEMSTICK_PART_SHIFT 3
-
 enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
 
 #define MEMSTICK_POWER_OFF 0
@@ -215,24 +213,27 @@ enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
 struct memstick_host;
 struct memstick_driver;
 
+struct memstick_device_id {
+	unsigned char match_flags;
 #define MEMSTICK_MATCH_ALL            0x01
 
+	unsigned char type;
 #define MEMSTICK_TYPE_LEGACY          0xff
 #define MEMSTICK_TYPE_DUO             0x00
 #define MEMSTICK_TYPE_PRO             0x01
 
+	unsigned char category;
 #define MEMSTICK_CATEGORY_STORAGE     0xff
 #define MEMSTICK_CATEGORY_STORAGE_DUO 0x00
+#define MEMSTICK_CATEGORY_IO          0x01
+#define MEMSTICK_CATEGORY_IO_PRO      0x10
 
-#define MEMSTICK_CLASS_GENERIC        0xff
-#define MEMSTICK_CLASS_GENERIC_DUO    0x00
-
-
-struct memstick_device_id {
-	unsigned char match_flags;
-	unsigned char type;
-	unsigned char category;
 	unsigned char class;
+#define MEMSTICK_CLASS_FLASH          0xff
+#define MEMSTICK_CLASS_DUO            0x00
+#define MEMSTICK_CLASS_ROM            0x01
+#define MEMSTICK_CLASS_RO             0x02
+#define MEMSTICK_CLASS_WP             0x03
 };
 
 struct memstick_request {
@@ -319,9 +320,9 @@ void memstick_suspend_host(struct memstick_host *host);
 void memstick_resume_host(struct memstick_host *host);
 
 void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
-			  struct scatterlist *sg);
+			  const struct scatterlist *sg);
 void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
-		       void *buf, size_t length);
+		       const void *buf, size_t length);
 int memstick_next_req(struct memstick_host *host,
 		      struct memstick_request **mrq);
 void memstick_new_req(struct memstick_host *host);
diff --git a/include/linux/mfd/t7l66xb.h b/include/linux/mfd/t7l66xb.h
new file mode 100644
index 00000000000..e83c7f2036f
--- /dev/null
+++ b/include/linux/mfd/t7l66xb.h
@@ -0,0 +1,36 @@
+/*
+ * This file contains the definitions for the T7L66XB
+ *
+ * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef MFD_T7L66XB_H
+#define MFD_T7L66XB_H
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+
+struct t7l66xb_platform_data {
+	int (*enable_clk32k)(struct platform_device *dev);
+	void (*disable_clk32k)(struct platform_device *dev);
+	int (*enable)(struct platform_device *dev);
+	int (*disable)(struct platform_device *dev);
+	int (*suspend)(struct platform_device *dev);
+	int (*resume)(struct platform_device *dev);
+
+	int irq_base; /* The base for subdevice irqs */
+
+	struct tmio_nand_data *nand_data;
+};
+
+
+#define IRQ_T7L66XB_MMC        (1)
+#define IRQ_T7L66XB_NAND       (3)
+
+#define T7L66XB_NR_IRQS	8
+
+#endif
diff --git a/include/linux/mfd/tc6387xb.h b/include/linux/mfd/tc6387xb.h
new file mode 100644
index 00000000000..fa06e0610b8
--- /dev/null
+++ b/include/linux/mfd/tc6387xb.h
@@ -0,0 +1,23 @@
+/*
+ * This file contains the definitions for the TC6387XB
+ *
+ * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ */
+#ifndef MFD_TC6387XB_H
+#define MFD_TC6387XB_H
+
+struct tc6387xb_platform_data {
+	int (*enable_clk32k)(struct platform_device *dev);
+	void (*disable_clk32k)(struct platform_device *dev);
+
+	int (*enable)(struct platform_device *dev);
+	int (*disable)(struct platform_device *dev);
+	int (*suspend)(struct platform_device *dev);
+	int (*resume)(struct platform_device *dev);
+};
+
+#endif
diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
index 7cc824a58f7..fec7b3f7a81 100644
--- a/include/linux/mfd/tc6393xb.h
+++ b/include/linux/mfd/tc6393xb.h
@@ -14,8 +14,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef TC6393XB_H
-#define TC6393XB_H
+#ifndef MFD_TC6393XB_H
+#define MFD_TC6393XB_H
 
 /* Also one should provide the CK3P6MI clock */
 struct tc6393xb_platform_data {
@@ -29,7 +29,7 @@ struct tc6393xb_platform_data {
 	int	(*suspend)(struct platform_device *dev);
 	int	(*resume)(struct platform_device *dev);
 
-	int	irq_base;	/* a base for cascaded irq */
+	int	irq_base;	/* base for subdevice irqs */
 	int	gpio_base;
 
 	struct tmio_nand_data	*nand_data;
@@ -40,9 +40,6 @@ struct tc6393xb_platform_data {
  */
 #define	IRQ_TC6393_NAND		0
 #define	IRQ_TC6393_MMC		1
-#define	IRQ_TC6393_OHCI		2
-#define	IRQ_TC6393_SERIAL	3
-#define	IRQ_TC6393_FB		4
 
 #define	TC6393XB_NR_IRQS	8
 
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 9438d8c9ac1..ec612e66391 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -1,6 +1,21 @@
 #ifndef MFD_TMIO_H
 #define MFD_TMIO_H
 
+#define tmio_ioread8(addr) readb(addr)
+#define tmio_ioread16(addr) readw(addr)
+#define tmio_ioread16_rep(r, b, l) readsw(r, b, l)
+#define tmio_ioread32(addr) \
+	(((u32) readw((addr))) | (((u32) readw((addr) + 2)) << 16))
+
+#define tmio_iowrite8(val, addr) writeb((val), (addr))
+#define tmio_iowrite16(val, addr) writew((val), (addr))
+#define tmio_iowrite16_rep(r, b, l) writesw(r, b, l)
+#define tmio_iowrite32(val, addr) \
+	do { \
+	writew((val),       (addr)); \
+	writew((val) >> 16, (addr) + 2); \
+	} while (0)
+
 /*
  * data for the NAND controller
  */
@@ -10,8 +25,4 @@ struct tmio_nand_data {
 	unsigned int		num_partitions;
 };
 
-#define TMIO_NAND_CONFIG	"tmio-nand-config"
-#define TMIO_NAND_CONTROL	"tmio-nand-control"
-#define TMIO_NAND_IRQ		"tmio-nand"
-
 #endif
diff --git a/include/linux/mlx4/cq.h b/include/linux/mlx4/cq.h
index 071cf96cf01..6f65b2c8bb8 100644
--- a/include/linux/mlx4/cq.h
+++ b/include/linux/mlx4/cq.h
@@ -39,17 +39,18 @@
 #include <linux/mlx4/doorbell.h>
 
 struct mlx4_cqe {
-	__be32			my_qpn;
+	__be32			vlan_my_qpn;
 	__be32			immed_rss_invalid;
 	__be32			g_mlpath_rqpn;
-	u8			sl;
-	u8			reserved1;
+	__be16			sl_vid;
 	__be16			rlid;
-	__be32			ipoib_status;
+	__be16			status;
+	u8			ipv6_ext_mask;
+	u8			badfcs_enc;
 	__be32			byte_cnt;
 	__be16			wqe_index;
 	__be16			checksum;
-	u8			reserved2[3];
+	u8			reserved[3];
 	u8			owner_sr_opcode;
 };
 
@@ -64,6 +65,11 @@ struct mlx4_err_cqe {
 };
 
 enum {
+	MLX4_CQE_VLAN_PRESENT_MASK	= 1 << 29,
+	MLX4_CQE_QPN_MASK		= 0xffffff,
+};
+
+enum {
 	MLX4_CQE_OWNER_MASK	= 0x80,
 	MLX4_CQE_IS_SEND_MASK	= 0x40,
 	MLX4_CQE_OPCODE_MASK	= 0x1f
@@ -86,13 +92,19 @@ enum {
 };
 
 enum {
-	MLX4_CQE_IPOIB_STATUS_IPV4			= 1 << 22,
-	MLX4_CQE_IPOIB_STATUS_IPV4F			= 1 << 23,
-	MLX4_CQE_IPOIB_STATUS_IPV6			= 1 << 24,
-	MLX4_CQE_IPOIB_STATUS_IPV4OPT			= 1 << 25,
-	MLX4_CQE_IPOIB_STATUS_TCP			= 1 << 26,
-	MLX4_CQE_IPOIB_STATUS_UDP			= 1 << 27,
-	MLX4_CQE_IPOIB_STATUS_IPOK			= 1 << 28,
+	MLX4_CQE_STATUS_IPV4		= 1 << 6,
+	MLX4_CQE_STATUS_IPV4F		= 1 << 7,
+	MLX4_CQE_STATUS_IPV6		= 1 << 8,
+	MLX4_CQE_STATUS_IPV4OPT		= 1 << 9,
+	MLX4_CQE_STATUS_TCP		= 1 << 10,
+	MLX4_CQE_STATUS_UDP		= 1 << 11,
+	MLX4_CQE_STATUS_IPOK		= 1 << 12,
+};
+
+enum {
+	MLX4_CQE_LLC                     = 1,
+	MLX4_CQE_SNAP                    = 1 << 1,
+	MLX4_CQE_BAD_FCS                 = 1 << 4,
 };
 
 static inline void mlx4_cq_arm(struct mlx4_cq *cq, u32 cmd,
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 655ea0d1ee1..b2f94446831 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -141,6 +141,10 @@ enum {
 	MLX4_STAT_RATE_OFFSET	= 5
 };
 
+enum {
+	MLX4_MTT_FLAG_PRESENT		= 1
+};
+
 static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
 {
 	return (major << 32) | (minor << 16) | subminor;
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 866a3dbe5c7..72a15dc26bb 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -73,7 +73,7 @@ extern unsigned int kobjsize(const void *objp);
 #endif
 
 /*
- * vm_flags..
+ * vm_flags in vm_area_struct, see mm_types.h.
  */
 #define VM_READ		0x00000001	/* currently active flags */
 #define VM_WRITE	0x00000002
@@ -744,6 +744,8 @@ struct zap_details {
 struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 		pte_t pte);
 
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+		unsigned long size);
 unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
 		unsigned long size, struct zap_details *);
 unsigned long unmap_vmas(struct mmu_gather **tlb,
@@ -832,7 +834,6 @@ extern int mprotect_fixup(struct vm_area_struct *vma,
 			  struct vm_area_struct **pprev, unsigned long start,
 			  unsigned long end, unsigned long newflags);
 
-#ifdef CONFIG_HAVE_GET_USER_PAGES_FAST
 /*
  * get_user_pages_fast provides equivalent functionality to get_user_pages,
  * operating on current and current->mm (force=0 and doesn't return any vmas).
@@ -846,25 +847,6 @@ extern int mprotect_fixup(struct vm_area_struct *vma,
 int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 			struct page **pages);
 
-#else
-/*
- * Should probably be moved to asm-generic, and architectures can include it if
- * they don't implement their own get_user_pages_fast.
- */
-#define get_user_pages_fast(start, nr_pages, write, pages)	\
-({								\
-	struct mm_struct *mm = current->mm;			\
-	int ret;						\
-								\
-	down_read(&mm->mmap_sem);				\
-	ret = get_user_pages(current, mm, start, nr_pages,	\
-					write, 0, pages, NULL);	\
-	up_read(&mm->mmap_sem);					\
-								\
-	ret;							\
-})
-#endif
-
 /*
  * A callback you can register to apply pressure to ageable caches.
  *
@@ -1041,7 +1023,6 @@ extern unsigned long absent_pages_in_range(unsigned long start_pfn,
 extern void get_pfn_range_for_nid(unsigned int nid,
 			unsigned long *start_pfn, unsigned long *end_pfn);
 extern unsigned long find_min_pfn_with_active_regions(void);
-extern unsigned long find_max_pfn_with_active_regions(void);
 extern void free_bootmem_with_active_regions(int nid,
 						unsigned long max_low_pfn);
 typedef int (*work_fn_t)(unsigned long, unsigned long, void *);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 386edbe2cb4..bf334138c7c 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -113,7 +113,7 @@ struct vm_area_struct {
 	struct vm_area_struct *vm_next;
 
 	pgprot_t vm_page_prot;		/* Access permissions of this VMA. */
-	unsigned long vm_flags;		/* Flags, listed below. */
+	unsigned long vm_flags;		/* Flags, see mm.h. */
 
 	struct rb_node vm_rb;
 
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 443bc7cd8c6..428328a05fa 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -751,8 +751,9 @@ static inline int zonelist_node_idx(struct zoneref *zoneref)
  *
  * This function returns the next zone at or below a given zone index that is
  * within the allowed nodemask using a cursor as the starting point for the
- * search. The zoneref returned is a cursor that is used as the next starting
- * point for future calls to next_zones_zonelist().
+ * search. The zoneref returned is a cursor that represents the current zone
+ * being examined. It should be advanced by one before calling
+ * next_zones_zonelist again.
  */
 struct zoneref *next_zones_zonelist(struct zoneref *z,
 					enum zone_type highest_zoneidx,
@@ -768,9 +769,8 @@ struct zoneref *next_zones_zonelist(struct zoneref *z,
  *
  * This function returns the first zone at or below a given zone index that is
  * within the allowed nodemask. The zoneref returned is a cursor that can be
- * used to iterate the zonelist with next_zones_zonelist. The cursor should
- * not be used by the caller as it does not match the value of the zone
- * returned.
+ * used to iterate the zonelist with next_zones_zonelist by advancing it by
+ * one before calling.
  */
 static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
 					enum zone_type highest_zoneidx,
@@ -795,7 +795,7 @@ static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
 #define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \
 	for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone);	\
 		zone;							\
-		z = next_zones_zonelist(z, highidx, nodemask, &zone))	\
+		z = next_zones_zonelist(++z, highidx, nodemask, &zone))	\
 
 /**
  * for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index
diff --git a/include/linux/mount.h b/include/linux/mount.h
index b5efaa2132a..30a1d63b6fb 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -105,7 +105,8 @@ extern struct vfsmount *vfs_kern_mount(struct file_system_type *type,
 
 struct nameidata;
 
-extern int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
+struct path;
+extern int do_add_mount(struct vfsmount *newmnt, struct path *path,
 			int mnt_flags, struct list_head *fslist);
 
 extern void mark_mounts_for_expiry(struct list_head *mounts);
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 07112ee9293..8a455694d68 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -6,7 +6,6 @@
 #ifdef __KERNEL__
 #include <linux/in.h>
 #endif
-#include <linux/pim.h>
 
 /*
  *	Based on the MROUTING 3.5 defines primarily to keep
@@ -130,6 +129,7 @@ struct igmpmsg
  */
 
 #ifdef __KERNEL__
+#include <linux/pim.h>
 #include <net/sock.h>
 
 #ifdef CONFIG_IP_MROUTE
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 5cf50473a10..6f4c180179e 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -115,6 +115,7 @@ struct sioc_mif_req6
 
 #ifdef __KERNEL__
 
+#include <linux/pim.h>
 #include <linux/skbuff.h>	/* for struct sk_buff_head */
 
 #ifdef CONFIG_IPV6_MROUTE
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 4ed40caff4e..92263654855 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -272,7 +272,11 @@ static inline void mtd_erase_callback(struct erase_info *instr)
 			printk(KERN_INFO args);		\
 	} while(0)
 #else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...) do { } while(0)
+#define DEBUG(n, args...)				\
+	do {						\
+		if (0)					\
+			printk(KERN_INFO args);		\
+	} while(0)
 
 #endif /* CONFIG_MTD_DEBUG */
 
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 83f678702df..81774e5facf 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -177,7 +177,9 @@ typedef enum {
 #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
-#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT))
+/* Large page NAND with SOFT_ECC should support subpage reads */
+#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
+					&& (chip->page_shift > 9))
 
 /* Mask to zero out the chip options, which come from the id table */
 #define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
diff --git a/include/linux/net.h b/include/linux/net.h
index 4a9a30f2d68..6dc14a24004 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -18,16 +18,9 @@
 #ifndef _LINUX_NET_H
 #define _LINUX_NET_H
 
-#include <linux/wait.h>
 #include <linux/socket.h>
-#include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
 #include <asm/socket.h>
 
-struct poll_table_struct;
-struct pipe_inode_info;
-struct inode;
-struct net;
-
 #define NPROTO		AF_MAX
 
 #define SYS_SOCKET	1		/* sys_socket(2)		*/
@@ -62,6 +55,13 @@ typedef enum {
 #ifdef __KERNEL__
 #include <linux/stringify.h>
 #include <linux/random.h>
+#include <linux/wait.h>
+#include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
+
+struct poll_table_struct;
+struct pipe_inode_info;
+struct inode;
+struct net;
 
 #define SOCK_ASYNC_NOSPACE	0
 #define SOCK_ASYNC_WAITDATA	1
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b4d056ceab9..488c56e649b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -61,9 +61,7 @@ struct wireless_dev;
 #define NET_XMIT_DROP		1	/* skb dropped			*/
 #define NET_XMIT_CN		2	/* congestion notification	*/
 #define NET_XMIT_POLICED	3	/* skb is shot by police	*/
-#define NET_XMIT_BYPASS		4	/* packet does not leave via dequeue;
-					   (TC use only - dev_queue_xmit
-					   returns this as NET_XMIT_SUCCESS) */
+#define NET_XMIT_MASK		0xFFFF	/* qdisc flags in net/sch_generic.h */
 
 /* Backlog congestion levels */
 #define NET_RX_SUCCESS		0   /* keep 'em coming, baby */
@@ -440,6 +438,7 @@ static inline void napi_synchronize(const struct napi_struct *n)
 enum netdev_queue_state_t
 {
 	__QUEUE_STATE_XOFF,
+	__QUEUE_STATE_FROZEN,
 };
 
 struct netdev_queue {
@@ -636,7 +635,7 @@ struct net_device
 	unsigned int		real_num_tx_queues;
 
 	unsigned long		tx_queue_len;	/* Max frames per queue allowed */
-
+	spinlock_t		tx_global_lock;
 /*
  * One part is mostly used on xmit path (device)
  */
@@ -1099,6 +1098,11 @@ static inline int netif_queue_stopped(const struct net_device *dev)
 	return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0));
 }
 
+static inline int netif_tx_queue_frozen(const struct netdev_queue *dev_queue)
+{
+	return test_bit(__QUEUE_STATE_FROZEN, &dev_queue->state);
+}
+
 /**
  *	netif_running - test if up
  *	@dev: network device
@@ -1475,6 +1479,26 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
 	txq->xmit_lock_owner = smp_processor_id();
 }
 
+static inline int __netif_tx_trylock(struct netdev_queue *txq)
+{
+	int ok = spin_trylock(&txq->_xmit_lock);
+	if (likely(ok))
+		txq->xmit_lock_owner = smp_processor_id();
+	return ok;
+}
+
+static inline void __netif_tx_unlock(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+	spin_unlock(&txq->_xmit_lock);
+}
+
+static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+	spin_unlock_bh(&txq->_xmit_lock);
+}
+
 /**
  *	netif_tx_lock - grab network device transmit lock
  *	@dev: network device
@@ -1484,12 +1508,23 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
  */
 static inline void netif_tx_lock(struct net_device *dev)
 {
-	int cpu = smp_processor_id();
 	unsigned int i;
+	int cpu;
 
+	spin_lock(&dev->tx_global_lock);
+	cpu = smp_processor_id();
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		/* We are the only thread of execution doing a
+		 * freeze, but we have to grab the _xmit_lock in
+		 * order to synchronize with threads which are in
+		 * the ->hard_start_xmit() handler and already
+		 * checked the frozen bit.
+		 */
 		__netif_tx_lock(txq, cpu);
+		set_bit(__QUEUE_STATE_FROZEN, &txq->state);
+		__netif_tx_unlock(txq);
 	}
 }
 
@@ -1499,40 +1534,22 @@ static inline void netif_tx_lock_bh(struct net_device *dev)
 	netif_tx_lock(dev);
 }
 
-static inline int __netif_tx_trylock(struct netdev_queue *txq)
-{
-	int ok = spin_trylock(&txq->_xmit_lock);
-	if (likely(ok))
-		txq->xmit_lock_owner = smp_processor_id();
-	return ok;
-}
-
-static inline int netif_tx_trylock(struct net_device *dev)
-{
-	return __netif_tx_trylock(netdev_get_tx_queue(dev, 0));
-}
-
-static inline void __netif_tx_unlock(struct netdev_queue *txq)
-{
-	txq->xmit_lock_owner = -1;
-	spin_unlock(&txq->_xmit_lock);
-}
-
-static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
-{
-	txq->xmit_lock_owner = -1;
-	spin_unlock_bh(&txq->_xmit_lock);
-}
-
 static inline void netif_tx_unlock(struct net_device *dev)
 {
 	unsigned int i;
 
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-		__netif_tx_unlock(txq);
-	}
 
+		/* No need to grab the _xmit_lock here.  If the
+		 * queue is not stopped for another reason, we
+		 * force a schedule.
+		 */
+		clear_bit(__QUEUE_STATE_FROZEN, &txq->state);
+		if (!test_bit(__QUEUE_STATE_XOFF, &txq->state))
+			__netif_schedule(txq->qdisc);
+	}
+	spin_unlock(&dev->tx_global_lock);
 }
 
 static inline void netif_tx_unlock_bh(struct net_device *dev)
@@ -1556,13 +1573,18 @@ static inline void netif_tx_unlock_bh(struct net_device *dev)
 static inline void netif_tx_disable(struct net_device *dev)
 {
 	unsigned int i;
+	int cpu;
 
-	netif_tx_lock_bh(dev);
+	local_bh_disable();
+	cpu = smp_processor_id();
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		__netif_tx_lock(txq, cpu);
 		netif_tx_stop_queue(txq);
+		__netif_tx_unlock(txq);
 	}
-	netif_tx_unlock_bh(dev);
+	local_bh_enable();
 }
 
 static inline void netif_addr_lock(struct net_device *dev)
diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h
index 22ce29995f1..a049df4f223 100644
--- a/include/linux/netfilter/nf_conntrack_tcp.h
+++ b/include/linux/netfilter/nf_conntrack_tcp.h
@@ -30,6 +30,9 @@ enum tcp_conntrack {
 /* Be liberal in window checking */
 #define IP_CT_TCP_FLAG_BE_LIBERAL		0x08
 
+/* Has unacknowledged data */
+#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED	0x10
+
 struct nf_ct_tcp_flags {
 	u_int8_t flags;
 	u_int8_t mask;
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 54590a9a103..c74d3e87531 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -163,7 +163,7 @@ static inline int Page##uname(struct page *page) 			\
 
 struct page;	/* forward declaration */
 
-PAGEFLAG(Locked, locked) TESTSCFLAG(Locked, locked)
+TESTPAGEFLAG(Locked, locked)
 PAGEFLAG(Error, error)
 PAGEFLAG(Referenced, referenced) TESTCLEARFLAG(Referenced, referenced)
 PAGEFLAG(Dirty, dirty) TESTSCFLAG(Dirty, dirty) __CLEARPAGEFLAG(Dirty, dirty)
@@ -239,9 +239,6 @@ static inline void __SetPageUptodate(struct page *page)
 {
 	smp_wmb();
 	__set_bit(PG_uptodate, &(page)->flags);
-#ifdef CONFIG_S390
-	page_clear_dirty(page);
-#endif
 }
 
 static inline void SetPageUptodate(struct page *page)
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index a39b38ccdc9..5da31c12101 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -143,6 +143,29 @@ static inline int page_cache_get_speculative(struct page *page)
 	return 1;
 }
 
+/*
+ * Same as above, but add instead of inc (could just be merged)
+ */
+static inline int page_cache_add_speculative(struct page *page, int count)
+{
+	VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+# ifdef CONFIG_PREEMPT
+	VM_BUG_ON(!in_atomic());
+# endif
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_add(count, &page->_count);
+
+#else
+	if (unlikely(!atomic_add_unless(&page->_count, count, 0)))
+		return 0;
+#endif
+	VM_BUG_ON(PageCompound(page) && page != compound_head(page));
+
+	return 1;
+}
+
 static inline int page_freeze_refs(struct page *page, int count)
 {
 	return likely(atomic_cmpxchg(&page->_count, count, 0) == count);
@@ -227,29 +250,6 @@ static inline struct page *read_mapping_page(struct address_space *mapping,
 	return read_cache_page(mapping, index, filler, data);
 }
 
-int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
-				pgoff_t index, gfp_t gfp_mask);
-int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
-				pgoff_t index, gfp_t gfp_mask);
-extern void remove_from_page_cache(struct page *page);
-extern void __remove_from_page_cache(struct page *page);
-
-/*
- * Like add_to_page_cache_locked, but used to add newly allocated pages:
- * the page is new, so we can just run SetPageLocked() against it.
- */
-static inline int add_to_page_cache(struct page *page,
-		struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask)
-{
-	int error;
-
-	SetPageLocked(page);
-	error = add_to_page_cache_locked(page, mapping, offset, gfp_mask);
-	if (unlikely(error))
-		ClearPageLocked(page);
-	return error;
-}
-
 /*
  * Return byte-offset into filesystem object for page.
  */
@@ -271,13 +271,28 @@ extern int __lock_page_killable(struct page *page);
 extern void __lock_page_nosync(struct page *page);
 extern void unlock_page(struct page *page);
 
+static inline void set_page_locked(struct page *page)
+{
+	set_bit(PG_locked, &page->flags);
+}
+
+static inline void clear_page_locked(struct page *page)
+{
+	clear_bit(PG_locked, &page->flags);
+}
+
+static inline int trylock_page(struct page *page)
+{
+	return !test_and_set_bit(PG_locked, &page->flags);
+}
+
 /*
  * lock_page may only be called if we have the page's inode pinned.
  */
 static inline void lock_page(struct page *page)
 {
 	might_sleep();
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		__lock_page(page);
 }
 
@@ -289,7 +304,7 @@ static inline void lock_page(struct page *page)
 static inline int lock_page_killable(struct page *page)
 {
 	might_sleep();
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		return __lock_page_killable(page);
 	return 0;
 }
@@ -301,7 +316,7 @@ static inline int lock_page_killable(struct page *page)
 static inline void lock_page_nosync(struct page *page)
 {
 	might_sleep();
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		__lock_page_nosync(page);
 }
 	
@@ -386,4 +401,27 @@ static inline int fault_in_pages_readable(const char __user *uaddr, int size)
 	return ret;
 }
 
+int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
+int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
+extern void remove_from_page_cache(struct page *page);
+extern void __remove_from_page_cache(struct page *page);
+
+/*
+ * Like add_to_page_cache_locked, but used to add newly allocated pages:
+ * the page is new, so we can just run set_page_locked() against it.
+ */
+static inline int add_to_page_cache(struct page *page,
+		struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask)
+{
+	int error;
+
+	set_page_locked(page);
+	error = add_to_page_cache_locked(page, mapping, offset, gfp_mask);
+	if (unlikely(error))
+		clear_page_locked(page);
+	return error;
+}
+
 #endif /* _LINUX_PAGEMAP_H */
diff --git a/include/linux/parser.h b/include/linux/parser.h
index cc554ca8bc7..7dcd0507575 100644
--- a/include/linux/parser.h
+++ b/include/linux/parser.h
@@ -14,7 +14,7 @@ struct match_token {
 	const char *pattern;
 };
 
-typedef const struct match_token match_table_t[];
+typedef struct match_token match_table_t[];
 
 /* Maximum number of arguments that match_token will find in a pattern */
 enum {MAX_OPT_ARGS = 3};
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 3ba25065fa9..8837928fbf3 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -57,6 +57,15 @@ static inline acpi_status pcie_osc_support_set(u32 flags)
 {
 	return __pci_osc_support_set(flags, PCI_EXPRESS_ROOT_HID_STRING);
 }
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{
+	/* Find root host bridge */
+	while (pdev->bus->self)
+		pdev = pdev->bus->self;
+
+	return acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus),
+			pdev->bus->number);
+}
 #else
 #if !defined(AE_ERROR)
 typedef u32 		acpi_status;
@@ -66,6 +75,8 @@ static inline acpi_status pci_osc_control_set(acpi_handle handle, u32 flags)
 {return AE_ERROR;}
 static inline acpi_status pci_osc_support_set(u32 flags) {return AE_ERROR;} 
 static inline acpi_status pcie_osc_support_set(u32 flags) {return AE_ERROR;}
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{ return NULL; }
 #endif
 
 #endif	/* _PCI_ACPI_H_ */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 825be3878f6..c0e14008a3c 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -641,6 +641,7 @@ int pci_restore_state(struct pci_dev *dev);
 int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
 bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
+void pci_pme_active(struct pci_dev *dev, bool enable);
 int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
 pci_power_t pci_target_state(struct pci_dev *dev);
 int pci_prepare_to_sleep(struct pci_dev *dev);
@@ -680,10 +681,12 @@ void pci_enable_bridges(struct pci_bus *bus);
 /* Proper probing supporting hot-pluggable devices */
 int __must_check __pci_register_driver(struct pci_driver *, struct module *,
 				       const char *mod_name);
-static inline int __must_check pci_register_driver(struct pci_driver *driver)
-{
-	return __pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME);
-}
+
+/*
+ * pci_register_driver must be a macro so that KBUILD_MODNAME can be expanded
+ */
+#define pci_register_driver(driver)		\
+	__pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
 
 void pci_unregister_driver(struct pci_driver *dev);
 void pci_remove_behind_bridge(struct pci_dev *dev);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 35a78415acc..f1624b39675 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2177,8 +2177,6 @@
 #define PCI_DEVICE_ID_HERC_WIN		0x5732
 #define PCI_DEVICE_ID_HERC_UNI		0x5832
 
-#define PCI_VENDOR_ID_RDC		0x17f3
-
 #define PCI_VENDOR_ID_SITECOM		0x182d
 #define PCI_DEVICE_ID_SITECOM_DC105V2	0x3069
 
@@ -2430,6 +2428,9 @@
 #define PCI_DEVICE_ID_INTEL_ICH10_3	0x3a1a
 #define PCI_DEVICE_ID_INTEL_ICH10_4	0x3a30
 #define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
+#define PCI_DEVICE_ID_INTEL_PCH_0	0x3b10
+#define PCI_DEVICE_ID_INTEL_PCH_1	0x3b11
+#define PCI_DEVICE_ID_INTEL_PCH_2	0x3b30
 #define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
 #define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
 #define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
diff --git a/include/linux/pid.h b/include/linux/pid.h
index 22921ac4cfd..d7e98ff8021 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -161,4 +161,13 @@ pid_t pid_vnr(struct pid *pid);
 			}						\
 	} while (0)
 
+#define do_each_pid_thread(pid, type, task)				\
+	do_each_pid_task(pid, type, task) {				\
+		struct task_struct *tg___ = task;			\
+		do {
+
+#define while_each_pid_thread(pid, type, task)				\
+		} while_each_thread(tg___, task);			\
+		task = tg___;						\
+	} while_each_pid_task(pid, type, task)
 #endif /* _LINUX_PID_H */
diff --git a/include/linux/pim.h b/include/linux/pim.h
index 236ffd31739..1ba0661561a 100644
--- a/include/linux/pim.h
+++ b/include/linux/pim.h
@@ -3,22 +3,6 @@
 
 #include <asm/byteorder.h>
 
-#ifndef __KERNEL__
-struct pim {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	pim_type:4,		/* PIM message type */
-		pim_ver:4;		/* PIM version */
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	pim_ver:4;		/* PIM version */
-		pim_type:4;		/* PIM message type */
-#endif
-	__u8	pim_rsv;		/* Reserved */
-	__be16	pim_cksum;		/* Checksum */
-};
-
-#define PIM_MINLEN		8
-#endif
-
 /* Message types - V1 */
 #define PIM_V1_VERSION		__constant_htonl(0x10000000)
 #define PIM_V1_REGISTER		1
@@ -27,7 +11,6 @@ struct pim {
 #define PIM_VERSION		2
 #define PIM_REGISTER		1
 
-#if defined(__KERNEL__)
 #define PIM_NULL_REGISTER	__constant_htonl(0x40000000)
 
 /* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */
@@ -42,4 +25,3 @@ struct pimreghdr
 struct sk_buff;
 extern int pim_rcv_v1(struct sk_buff *);
 #endif
-#endif
diff --git a/include/linux/pm_qos_params.h b/include/linux/pm_qos_params.h
index 2e4e97bd19f..d74f75ed1e4 100644
--- a/include/linux/pm_qos_params.h
+++ b/include/linux/pm_qos_params.h
@@ -1,6 +1,6 @@
 /* interface for the pm_qos_power infrastructure of the linux kernel.
  *
- * Mark Gross
+ * Mark Gross <mgross@linux.intel.com>
  */
 #include <linux/list.h>
 #include <linux/notifier.h>
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 1ce54b63085..be764e514e3 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -21,7 +21,14 @@ struct pnp_dev;
 /*
  * Resource Management
  */
+#ifdef CONFIG_PNP
 struct resource *pnp_get_resource(struct pnp_dev *, unsigned int, unsigned int);
+#else
+static inline struct resource *pnp_get_resource(struct pnp_dev *dev, unsigned int type, unsigned int num)
+{
+	return NULL;
+}
+#endif
 
 static inline int pnp_resource_valid(struct resource *res)
 {
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 68ed19ccf1f..ea96ead1d39 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -78,6 +78,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_CHARGE_EMPTY,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_AVG,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_FULL,
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index fd31756e1a0..ea7416c901d 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -172,7 +172,7 @@ static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
 	child->ptrace = 0;
 	if (unlikely(ptrace)) {
 		child->ptrace = current->ptrace;
-		__ptrace_link(child, current->parent);
+		ptrace_link(child, current->parent);
 	}
 }
 
diff --git a/include/linux/quicklist.h b/include/linux/quicklist.h
index 39b66713a0b..bd466439c58 100644
--- a/include/linux/quicklist.h
+++ b/include/linux/quicklist.h
@@ -80,6 +80,13 @@ void quicklist_trim(int nr, void (*dtor)(void *),
 
 unsigned long quicklist_total_size(void);
 
+#else
+
+static inline unsigned long quicklist_total_size(void)
+{
+	return 0;
+}
+
 #endif
 
 #endif /* LINUX_QUICKLIST_H */
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 742187f7a05..ca6b9b5c8d5 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -43,6 +43,8 @@ int dquot_mark_dquot_dirty(struct dquot *dquot);
 
 int vfs_quota_on(struct super_block *sb, int type, int format_id,
  	char *path, int remount);
+int vfs_quota_on_path(struct super_block *sb, int type, int format_id,
+ 	struct path *path);
 int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
  	int format_id, int type);
 int vfs_quota_off(struct super_block *sb, int type, int remount);
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index 9f2549ac0e2..c200b9a34af 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -128,6 +128,7 @@ struct mddev_s
 #define MD_CHANGE_DEVS	0	/* Some device status has changed */
 #define MD_CHANGE_CLEAN 1	/* transition to or from 'clean' */
 #define MD_CHANGE_PENDING 2	/* superblock update in progress */
+#define MD_NOTIFY_ARRAY_STATE 3	/* atomic context wants to notify userspace */
 
 	int				ro;
 
diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h
index 8c774905dcf..4ab84362272 100644
--- a/include/linux/rcuclassic.h
+++ b/include/linux/rcuclassic.h
@@ -117,7 +117,7 @@ extern int rcu_needs_cpu(int cpu);
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 extern struct lockdep_map rcu_lock_map;
 # define rcu_read_acquire()	\
-			lock_acquire(&rcu_lock_map, 0, 0, 2, 1, _THIS_IP_)
+			lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_)
 # define rcu_read_release()	lock_release(&rcu_lock_map, 1, _THIS_IP_)
 #else
 # define rcu_read_acquire()	do { } while (0)
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index b93b541cf11..988e55fe649 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -59,6 +59,7 @@ extern void machine_crash_shutdown(struct pt_regs *);
  * Architecture independent implemenations of sys_reboot commands.
  */
 
+extern void kernel_restart_prepare(char *cmd);
 extern void kernel_restart(char *cmd);
 extern void kernel_halt(void);
 extern void kernel_power_off(void);
diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h
new file mode 100644
index 00000000000..e84b0a9feda
--- /dev/null
+++ b/include/linux/regulator/bq24022.h
@@ -0,0 +1,21 @@
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/**
+ * bq24022_mach_info - platform data for bq24022
+ * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging
+ * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA
+ */
+struct bq24022_mach_info {
+	int gpio_nce;
+	int gpio_iset2;
+};
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
new file mode 100644
index 00000000000..afdc4558bb9
--- /dev/null
+++ b/include/linux/regulator/consumer.h
@@ -0,0 +1,284 @@
+/*
+ * consumer.h -- SoC Regulator consumer support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Consumer Interface.
+ *
+ * A Power Management Regulator framework for SoC based devices.
+ * Features:-
+ *   o Voltage and current level control.
+ *   o Operating mode control.
+ *   o Regulator status.
+ *   o sysfs entries for showing client devices and status
+ *
+ * EXPERIMENTAL FEATURES:
+ *   Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
+ *   to use most efficient operating mode depending upon voltage and load and
+ *   is transparent to client drivers.
+ *
+ *   e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
+ *   IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
+ *   idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
+ *   but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
+ *   efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
+ *   in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_CONSUMER_H_
+#define __LINUX_REGULATOR_CONSUMER_H_
+
+/*
+ * Regulator operating modes.
+ *
+ * Regulators can run in a variety of different operating modes depending on
+ * output load. This allows further system power savings by selecting the
+ * best (and most efficient) regulator mode for a desired load.
+ *
+ * Most drivers will only care about NORMAL. The modes below are generic and
+ * will probably not match the naming convention of your regulator data sheet
+ * but should match the use cases in the datasheet.
+ *
+ * In order of power efficiency (least efficient at top).
+ *
+ *  Mode       Description
+ *  FAST       Regulator can handle fast changes in it's load.
+ *             e.g. useful in CPU voltage & frequency scaling where
+ *             load can quickly increase with CPU frequency increases.
+ *
+ *  NORMAL     Normal regulator power supply mode. Most drivers will
+ *             use this mode.
+ *
+ *  IDLE       Regulator runs in a more efficient mode for light
+ *             loads. Can be used for devices that have a low power
+ *             requirement during periods of inactivity. This mode
+ *             may be more noisy than NORMAL and may not be able
+ *             to handle fast load switching.
+ *
+ *  STANDBY    Regulator runs in the most efficient mode for very
+ *             light loads. Can be used by devices when they are
+ *             in a sleep/standby state. This mode is likely to be
+ *             the most noisy and may not be able to handle fast load
+ *             switching.
+ *
+ * NOTE: Most regulators will only support a subset of these modes. Some
+ * will only just support NORMAL.
+ *
+ * These modes can be OR'ed together to make up a mask of valid register modes.
+ */
+
+#define REGULATOR_MODE_FAST			0x1
+#define REGULATOR_MODE_NORMAL			0x2
+#define REGULATOR_MODE_IDLE			0x4
+#define REGULATOR_MODE_STANDBY			0x8
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE  Regulator output is under voltage.
+ * OVER_CURRENT   Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL           Regulator output has failed.
+ * OVER_TEMP      Regulator over temp.
+ * FORCE_DISABLE  Regulator shut down by software.
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE		0x01
+#define REGULATOR_EVENT_OVER_CURRENT		0x02
+#define REGULATOR_EVENT_REGULATION_OUT		0x04
+#define REGULATOR_EVENT_FAIL			0x08
+#define REGULATOR_EVENT_OVER_TEMP		0x10
+#define REGULATOR_EVENT_FORCE_DISABLE		0x20
+
+struct regulator;
+
+/**
+ * struct regulator_bulk_data - Data used for bulk regulator operations.
+ *
+ * @supply   The name of the supply.  Initialised by the user before
+ *           using the bulk regulator APIs.
+ * @consumer The regulator consumer for the supply.  This will be managed
+ *           by the bulk API.
+ *
+ * The regulator APIs provide a series of regulator_bulk_() API calls as
+ * a convenience to consumers which require multiple supplies.  This
+ * structure is used to manage data for these calls.
+ */
+struct regulator_bulk_data {
+	const char *supply;
+	struct regulator *consumer;
+};
+
+#if defined(CONFIG_REGULATOR)
+
+/* regulator get and put */
+struct regulator *__must_check regulator_get(struct device *dev,
+					     const char *id);
+void regulator_put(struct regulator *regulator);
+
+/* regulator output control and status */
+int regulator_enable(struct regulator *regulator);
+int regulator_disable(struct regulator *regulator);
+int regulator_force_disable(struct regulator *regulator);
+int regulator_is_enabled(struct regulator *regulator);
+
+int regulator_bulk_get(struct device *dev, int num_consumers,
+		       struct regulator_bulk_data *consumers);
+int regulator_bulk_enable(int num_consumers,
+			  struct regulator_bulk_data *consumers);
+int regulator_bulk_disable(int num_consumers,
+			   struct regulator_bulk_data *consumers);
+void regulator_bulk_free(int num_consumers,
+			 struct regulator_bulk_data *consumers);
+
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_get_voltage(struct regulator *regulator);
+int regulator_set_current_limit(struct regulator *regulator,
+			       int min_uA, int max_uA);
+int regulator_get_current_limit(struct regulator *regulator);
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+/* regulator notifier block */
+int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb);
+int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb);
+
+/* driver data - core doesn't touch */
+void *regulator_get_drvdata(struct regulator *regulator);
+void regulator_set_drvdata(struct regulator *regulator, void *data);
+
+#else
+
+/*
+ * Make sure client drivers will still build on systems with no software
+ * controllable voltage or current regulators.
+ */
+static inline struct regulator *__must_check regulator_get(struct device *dev,
+	const char *id)
+{
+	/* Nothing except the stubbed out regulator API should be
+	 * looking at the value except to check if it is an error
+	 * value so the actual return value doesn't matter.
+	 */
+	return (struct regulator *)id;
+}
+static inline void regulator_put(struct regulator *regulator)
+{
+}
+
+static inline int regulator_enable(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_disable(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_is_enabled(struct regulator *regulator)
+{
+	return 1;
+}
+
+static inline int regulator_bulk_get(struct device *dev,
+				     int num_consumers,
+				     struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline int regulator_bulk_enable(int num_consumers,
+					struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline int regulator_bulk_disable(int num_consumers,
+					 struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline void regulator_bulk_free(int num_consumers,
+				       struct regulator_bulk_data *consumers)
+{
+}
+
+static inline int regulator_set_voltage(struct regulator *regulator,
+					int min_uV, int max_uV)
+{
+	return 0;
+}
+
+static inline int regulator_get_voltage(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_set_current_limit(struct regulator *regulator,
+					     int min_uA, int max_uA)
+{
+	return 0;
+}
+
+static inline int regulator_get_current_limit(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_set_mode(struct regulator *regulator,
+	unsigned int mode)
+{
+	return 0;
+}
+
+static inline unsigned int regulator_get_mode(struct regulator *regulator)
+{
+	return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_set_optimum_mode(struct regulator *regulator,
+					int load_uA)
+{
+	return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline void *regulator_get_drvdata(struct regulator *regulator)
+{
+	return NULL;
+}
+
+static inline void regulator_set_drvdata(struct regulator *regulator,
+	void *data)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
new file mode 100644
index 00000000000..1d712c7172a
--- /dev/null
+++ b/include/linux/regulator/driver.h
@@ -0,0 +1,99 @@
+/*
+ * driver.h -- SoC Regulator driver support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_DRIVER_H_
+#define __LINUX_REGULATOR_DRIVER_H_
+
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+
+struct regulator_constraints;
+struct regulator_dev;
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * This struct describes regulator operations.
+ */
+struct regulator_ops {
+
+	/* get/set regulator voltage */
+	int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV);
+	int (*get_voltage) (struct regulator_dev *);
+
+	/* get/set regulator current  */
+	int (*set_current_limit) (struct regulator_dev *,
+				 int min_uA, int max_uA);
+	int (*get_current_limit) (struct regulator_dev *);
+
+	/* enable/disable regulator */
+	int (*enable) (struct regulator_dev *);
+	int (*disable) (struct regulator_dev *);
+	int (*is_enabled) (struct regulator_dev *);
+
+	/* get/set regulator operating mode (defined in regulator.h) */
+	int (*set_mode) (struct regulator_dev *, unsigned int mode);
+	unsigned int (*get_mode) (struct regulator_dev *);
+
+	/* get most efficient regulator operating mode for load */
+	unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
+					  int output_uV, int load_uA);
+
+	/* the operations below are for configuration of regulator state when
+	 * it's parent PMIC enters a global STANBY/HIBERNATE state */
+
+	/* set regulator suspend voltage */
+	int (*set_suspend_voltage) (struct regulator_dev *, int uV);
+
+	/* enable/disable regulator in suspend state */
+	int (*set_suspend_enable) (struct regulator_dev *);
+	int (*set_suspend_disable) (struct regulator_dev *);
+
+	/* set regulator suspend operating mode (defined in regulator.h) */
+	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+	REGULATOR_VOLTAGE,
+	REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Regulator descriptor
+ *
+ */
+struct regulator_desc {
+	const char *name;
+	int id;
+	struct regulator_ops *ops;
+	int irq;
+	enum regulator_type type;
+	struct module *owner;
+};
+
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+					  void *reg_data);
+void regulator_unregister(struct regulator_dev *rdev);
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data);
+
+void *rdev_get_drvdata(struct regulator_dev *rdev);
+int rdev_get_id(struct regulator_dev *rdev);
+
+#endif
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
new file mode 100644
index 00000000000..1387a5d2190
--- /dev/null
+++ b/include/linux/regulator/fixed.h
@@ -0,0 +1,22 @@
+/*
+ * fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_FIXED_H
+#define __REGULATOR_FIXED_H
+
+struct fixed_voltage_config {
+	const char *supply_name;
+	int microvolts;
+};
+
+#endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
new file mode 100644
index 00000000000..11e737dbfcf
--- /dev/null
+++ b/include/linux/regulator/machine.h
@@ -0,0 +1,104 @@
+/*
+ * machine.h -- SoC Regulator support, machine/board driver API.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Machine/Board Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_MACHINE_H_
+#define __LINUX_REGULATOR_MACHINE_H_
+
+#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
+
+struct regulator;
+
+/*
+ * Regulator operation constraint flags. These flags are used to enable
+ * certain regulator operations and can be OR'ed together.
+ *
+ * VOLTAGE:  Regulator output voltage can be changed by software on this
+ *           board/machine.
+ * CURRENT:  Regulator output current can be changed by software on this
+ *           board/machine.
+ * MODE:     Regulator operating mode can be changed by software on this
+ *           board/machine.
+ * STATUS:   Regulator can be enabled and disabled.
+ * DRMS:     Dynamic Regulator Mode Switching is enabled for this regulator.
+ */
+
+#define REGULATOR_CHANGE_VOLTAGE	0x1
+#define REGULATOR_CHANGE_CURRENT	0x2
+#define REGULATOR_CHANGE_MODE		0x4
+#define REGULATOR_CHANGE_STATUS		0x8
+#define REGULATOR_CHANGE_DRMS		0x10
+
+/**
+ * struct regulator_state - regulator state during low power syatem states
+ *
+ * This describes a regulators state during a system wide low power state.
+ */
+struct regulator_state {
+	int uV;	/* suspend voltage */
+	unsigned int mode; /* suspend regulator operating mode */
+	int enabled; /* is regulator enabled in this suspend state */
+};
+
+/**
+ * struct regulation_constraints - regulator operating constraints.
+ *
+ * This struct describes regulator and board/machine specific constraints.
+ */
+struct regulation_constraints {
+
+	char *name;
+
+	/* voltage output range (inclusive) - for voltage control */
+	int min_uV;
+	int max_uV;
+
+	/* current output range (inclusive) - for current control */
+	int min_uA;
+	int max_uA;
+
+	/* valid regulator operating modes for this machine */
+	unsigned int valid_modes_mask;
+
+	/* valid operations for regulator on this machine */
+	unsigned int valid_ops_mask;
+
+	/* regulator input voltage - only if supply is another regulator */
+	int input_uV;
+
+	/* regulator suspend states for global PMIC STANDBY/HIBERNATE */
+	struct regulator_state state_disk;
+	struct regulator_state state_mem;
+	struct regulator_state state_standby;
+	suspend_state_t initial_state; /* suspend state to set at init */
+
+	/* constriant flags */
+	unsigned always_on:1;	/* regulator never off when system is on */
+	unsigned boot_on:1;	/* bootloader/firmware enabled regulator */
+	unsigned apply_uV:1;	/* apply uV constraint iff min == max */
+};
+
+int regulator_set_supply(const char *regulator, const char *regulator_supply);
+
+const char *regulator_get_supply(const char *regulator);
+
+int regulator_set_machine_constraints(const char *regulator,
+	struct regulation_constraints *constraints);
+
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+				const char *supply);
+
+int regulator_suspend_prepare(suspend_state_t state);
+
+#endif
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index fdeadd9740d..271c1c2c9f6 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -166,7 +166,7 @@ static inline int res_counter_set_limit(struct res_counter *cnt,
 	int ret = -EBUSY;
 
 	spin_lock_irqsave(&cnt->lock, flags);
-	if (cnt->usage < limit) {
+	if (cnt->usage <= limit) {
 		cnt->limit = limit;
 		ret = 0;
 	}
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index c5f6e54ec6a..741d1a62cc3 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -68,7 +68,8 @@ enum rfkill_state {
  * @user_claim_unsupported: Whether the hardware supports exclusive
  *	RF-kill control by userspace. Set this before registering.
  * @user_claim: Set when the switch is controlled exlusively by userspace.
- * @mutex: Guards switch state transitions
+ * @mutex: Guards switch state transitions.  It serializes callbacks
+ *	and also protects the state.
  * @data: Pointer to the RF button drivers private data which will be
  *	passed along when toggling radio state.
  * @toggle_radio(): Mandatory handler to control state of the radio.
@@ -89,12 +90,13 @@ struct rfkill {
 	const char *name;
 	enum rfkill_type type;
 
-	enum rfkill_state state;
 	bool user_claim_unsupported;
 	bool user_claim;
 
+	/* the mutex serializes callbacks and also protects
+	 * the state */
 	struct mutex mutex;
-
+	enum rfkill_state state;
 	void *data;
 	int (*toggle_radio)(void *data, enum rfkill_state state);
 	int (*get_state)(void *data, enum rfkill_state *state);
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index 69407f85e10..fed6f5e0b41 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -102,7 +102,7 @@ int try_to_unmap(struct page *, int ignore_refs);
  * Called from mm/filemap_xip.c to unmap empty zero page
  */
 pte_t *page_check_address(struct page *, struct mm_struct *,
-				unsigned long, spinlock_t **);
+				unsigned long, spinlock_t **, int);
 
 /*
  * Used by swapoff to help locate where page is expected in vma.
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 5270d449ff9..3d9120c5ad1 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -87,6 +87,7 @@ struct sched_param {
 #include <linux/task_io_accounting.h>
 #include <linux/kobject.h>
 #include <linux/latencytop.h>
+#include <linux/cred.h>
 
 #include <asm/processor.h>
 
@@ -1474,6 +1475,10 @@ static inline void put_task_struct(struct task_struct *t)
 		__put_task_struct(t);
 }
 
+extern cputime_t task_utime(struct task_struct *p);
+extern cputime_t task_stime(struct task_struct *p);
+extern cputime_t task_gtime(struct task_struct *p);
+
 /*
  * Per process flags
  */
@@ -1551,16 +1556,10 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
 
 extern unsigned long long sched_clock(void);
 
-#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
-static inline void sched_clock_init(void)
-{
-}
-
-static inline u64 sched_clock_cpu(int cpu)
-{
-	return sched_clock();
-}
+extern void sched_clock_init(void);
+extern u64 sched_clock_cpu(int cpu);
 
+#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
 static inline void sched_clock_tick(void)
 {
 }
@@ -1572,28 +1571,11 @@ static inline void sched_clock_idle_sleep_event(void)
 static inline void sched_clock_idle_wakeup_event(u64 delta_ns)
 {
 }
-
-#ifdef CONFIG_NO_HZ
-static inline void sched_clock_tick_stop(int cpu)
-{
-}
-
-static inline void sched_clock_tick_start(int cpu)
-{
-}
-#endif
-
-#else /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */
-extern void sched_clock_init(void);
-extern u64 sched_clock_cpu(int cpu);
+#else
 extern void sched_clock_tick(void);
 extern void sched_clock_idle_sleep_event(void);
 extern void sched_clock_idle_wakeup_event(u64 delta_ns);
-#ifdef CONFIG_NO_HZ
-extern void sched_clock_tick_stop(int cpu);
-extern void sched_clock_tick_start(int cpu);
 #endif
-#endif /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */
 
 /*
  * For kernel-internal use: high-speed (but slightly incorrect) per-cpu
diff --git a/include/linux/security.h b/include/linux/security.h
index fd96e7f8a6f..80c4d002864 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -46,8 +46,8 @@ struct audit_krule;
  */
 extern int cap_capable(struct task_struct *tsk, int cap);
 extern int cap_settime(struct timespec *ts, struct timezone *tz);
-extern int cap_ptrace(struct task_struct *parent, struct task_struct *child,
-		      unsigned int mode);
+extern int cap_ptrace_may_access(struct task_struct *child, unsigned int mode);
+extern int cap_ptrace_traceme(struct task_struct *parent);
 extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
 extern int cap_capset_check(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
 extern void cap_capset_set(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
@@ -1157,17 +1157,24 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
  *	@alter contains the flag indicating whether changes are to be made.
  *	Return 0 if permission is granted.
  *
- * @ptrace:
- *	Check permission before allowing the @parent process to trace the
+ * @ptrace_may_access:
+ *	Check permission before allowing the current process to trace the
  *	@child process.
  *	Security modules may also want to perform a process tracing check
  *	during an execve in the set_security or apply_creds hooks of
  *	binprm_security_ops if the process is being traced and its security
  *	attributes would be changed by the execve.
- *	@parent contains the task_struct structure for parent process.
- *	@child contains the task_struct structure for child process.
+ *	@child contains the task_struct structure for the target process.
  *	@mode contains the PTRACE_MODE flags indicating the form of access.
  *	Return 0 if permission is granted.
+ * @ptrace_traceme:
+ *	Check that the @parent process has sufficient permission to trace the
+ *	current process before allowing the current process to present itself
+ *	to the @parent process for tracing.
+ *	The parent process will still have to undergo the ptrace_may_access
+ *	checks before it is allowed to trace this one.
+ *	@parent contains the task_struct structure for debugger process.
+ *	Return 0 if permission is granted.
  * @capget:
  *	Get the @effective, @inheritable, and @permitted capability sets for
  *	the @target process.  The hook may also perform permission checking to
@@ -1287,8 +1294,8 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
 struct security_operations {
 	char name[SECURITY_NAME_MAX + 1];
 
-	int (*ptrace) (struct task_struct *parent, struct task_struct *child,
-		       unsigned int mode);
+	int (*ptrace_may_access) (struct task_struct *child, unsigned int mode);
+	int (*ptrace_traceme) (struct task_struct *parent);
 	int (*capget) (struct task_struct *target,
 		       kernel_cap_t *effective,
 		       kernel_cap_t *inheritable, kernel_cap_t *permitted);
@@ -1560,8 +1567,8 @@ extern struct dentry *securityfs_create_dir(const char *name, struct dentry *par
 extern void securityfs_remove(struct dentry *dentry);
 
 /* Security operations */
-int security_ptrace(struct task_struct *parent, struct task_struct *child,
-		    unsigned int mode);
+int security_ptrace_may_access(struct task_struct *child, unsigned int mode);
+int security_ptrace_traceme(struct task_struct *parent);
 int security_capget(struct task_struct *target,
 		    kernel_cap_t *effective,
 		    kernel_cap_t *inheritable,
@@ -1742,11 +1749,15 @@ static inline int security_init(void)
 	return 0;
 }
 
-static inline int security_ptrace(struct task_struct *parent,
-				  struct task_struct *child,
-				  unsigned int mode)
+static inline int security_ptrace_may_access(struct task_struct *child,
+					     unsigned int mode)
+{
+	return cap_ptrace_may_access(child, mode);
+}
+
+static inline int security_ptrace_traceme(struct task_struct *parent)
 {
-	return cap_ptrace(parent, child, mode);
+	return cap_ptrace_traceme(parent);
 }
 
 static inline int security_capget(struct task_struct *target,
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
index a66304a0995..a1783b229ef 100644
--- a/include/linux/seq_file.h
+++ b/include/linux/seq_file.h
@@ -4,6 +4,8 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/mutex.h>
+#include <linux/cpumask.h>
+#include <linux/nodemask.h>
 
 struct seq_operations;
 struct file;
@@ -47,6 +49,16 @@ int seq_path(struct seq_file *, struct path *, char *);
 int seq_dentry(struct seq_file *, struct dentry *, char *);
 int seq_path_root(struct seq_file *m, struct path *path, struct path *root,
 		  char *esc);
+int seq_bitmap(struct seq_file *m, unsigned long *bits, unsigned int nr_bits);
+static inline int seq_cpumask(struct seq_file *m, cpumask_t *mask)
+{
+	return seq_bitmap(m, mask->bits, NR_CPUS);
+}
+
+static inline int seq_nodemask(struct seq_file *m, nodemask_t *mask)
+{
+	return seq_bitmap(m, mask->bits, MAX_NUMNODES);
+}
 
 int single_open(struct file *, int (*)(struct seq_file *, void *), void *);
 int single_release(struct inode *, struct file *);
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 7ea44f6621f..90992371783 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -243,6 +243,7 @@ typedef unsigned char *sk_buff_data_t;
  *	@tc_index: Traffic control index
  *	@tc_verd: traffic control verdict
  *	@ndisc_nodetype: router type (from link layer)
+ *	@do_not_encrypt: set to prevent encryption of this frame
  *	@dma_cookie: a cookie to one of several possible DMA operations
  *		done by skb DMA functions
  *	@secmark: security marking
@@ -316,7 +317,10 @@ struct sk_buff {
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	__u8			ndisc_nodetype:2;
 #endif
-	/* 14 bit hole */
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+	__u8			do_not_encrypt:1;
+#endif
+	/* 0/13/14 bit hole */
 
 #ifdef CONFIG_NET_DMA
 	dma_cookie_t		dma_cookie;
@@ -897,7 +901,7 @@ extern unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta);
 static inline unsigned char *__pskb_pull(struct sk_buff *skb, unsigned int len)
 {
 	if (len > skb_headlen(skb) &&
-	    !__pskb_pull_tail(skb, len-skb_headlen(skb)))
+	    !__pskb_pull_tail(skb, len - skb_headlen(skb)))
 		return NULL;
 	skb->len -= len;
 	return skb->data += len;
@@ -914,7 +918,7 @@ static inline int pskb_may_pull(struct sk_buff *skb, unsigned int len)
 		return 1;
 	if (unlikely(len > skb->len))
 		return 0;
-	return __pskb_pull_tail(skb, len-skb_headlen(skb)) != NULL;
+	return __pskb_pull_tail(skb, len - skb_headlen(skb)) != NULL;
 }
 
 /**
@@ -1317,7 +1321,7 @@ static inline int skb_padto(struct sk_buff *skb, unsigned int len)
 	unsigned int size = skb->len;
 	if (likely(size >= len))
 		return 0;
-	return skb_pad(skb, len-size);
+	return skb_pad(skb, len - size);
 }
 
 static inline int skb_add_data(struct sk_buff *skb,
@@ -1448,6 +1452,10 @@ extern int	       skb_copy_datagram_iovec(const struct sk_buff *from,
 extern int	       skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
 							int hlen,
 							struct iovec *iov);
+extern int	       skb_copy_datagram_from_iovec(struct sk_buff *skb,
+						    int offset,
+						    struct iovec *from,
+						    int len);
 extern void	       skb_free_datagram(struct sock *sk, struct sk_buff *skb);
 extern int	       skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
 					 unsigned int flags);
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 5bad61a93f6..2f5c16b1aac 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -46,6 +46,7 @@ struct kmem_cache_cpu {
 struct kmem_cache_node {
 	spinlock_t list_lock;	/* Protect partial list and nr_partial */
 	unsigned long nr_partial;
+	unsigned long min_partial;
 	struct list_head partial;
 #ifdef CONFIG_SLUB_DEBUG
 	atomic_long_t nr_slabs;
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index 5df62ef1280..7a6e6bba4a7 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -214,6 +214,8 @@ enum
 	LINUX_MIB_TCPDSACKIGNOREDOLD,		/* TCPSACKIgnoredOld */
 	LINUX_MIB_TCPDSACKIGNOREDNOUNDO,	/* TCPSACKIgnoredNoUndo */
 	LINUX_MIB_TCPSPURIOUSRTOS,		/* TCPSpuriousRTOs */
+	LINUX_MIB_TCPMD5NOTFOUND,		/* TCPMD5NotFound */
+	LINUX_MIB_TCPMD5UNEXPECTED,		/* TCPMD5Unexpected */
 	__LINUX_MIB_MAX
 };
 
diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h
new file mode 100644
index 00000000000..b4d9fa6f797
--- /dev/null
+++ b/include/linux/spi/orion_spi.h
@@ -0,0 +1,17 @@
+/*
+ * orion_spi.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_SPI_ORION_SPI_H
+#define __LINUX_SPI_ORION_SPI_H
+
+struct orion_spi_info {
+	u32	tclk;		/* no <linux/clk.h> support yet */
+};
+
+
+#endif
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 61e5610ad16..e0c0fccced4 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -183,8 +183,14 @@ do {								\
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 # define spin_lock_nested(lock, subclass) _spin_lock_nested(lock, subclass)
+# define spin_lock_nest_lock(lock, nest_lock)				\
+	 do {								\
+		 typecheck(struct lockdep_map *, &(nest_lock)->dep_map);\
+		 _spin_lock_nest_lock(lock, &(nest_lock)->dep_map);	\
+	 } while (0)
 #else
 # define spin_lock_nested(lock, subclass) _spin_lock(lock)
+# define spin_lock_nest_lock(lock, nest_lock) _spin_lock(lock)
 #endif
 
 #define write_lock(lock)		_write_lock(lock)
diff --git a/include/linux/spinlock_api_smp.h b/include/linux/spinlock_api_smp.h
index 8a2307ce729..d79845d034b 100644
--- a/include/linux/spinlock_api_smp.h
+++ b/include/linux/spinlock_api_smp.h
@@ -22,6 +22,8 @@ int in_lock_functions(unsigned long addr);
 void __lockfunc _spin_lock(spinlock_t *lock)		__acquires(lock);
 void __lockfunc _spin_lock_nested(spinlock_t *lock, int subclass)
 							__acquires(lock);
+void __lockfunc _spin_lock_nest_lock(spinlock_t *lock, struct lockdep_map *map)
+							__acquires(lock);
 void __lockfunc _read_lock(rwlock_t *lock)		__acquires(lock);
 void __lockfunc _write_lock(rwlock_t *lock)		__acquires(lock);
 void __lockfunc _spin_lock_bh(spinlock_t *lock)		__acquires(lock);
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index f1cb0ba6d71..faf1519b5ad 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -3,16 +3,13 @@
 /* "Bogolock": stop the entire machine, disable interrupts.  This is a
    very heavy lock, which is equivalent to grabbing every spinlock
    (and more).  So the "read" side to such a lock is anything which
-   diables preeempt. */
+   disables preeempt. */
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <asm/system.h>
 
 #if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP)
 
-/* Deprecated, but useful for transition. */
-#define ALL_CPUS ~0U
-
 /**
  * stop_machine: freeze the machine on all CPUs and run this function
  * @fn: the function to run
@@ -50,18 +47,4 @@ static inline int stop_machine(int (*fn)(void *), void *data,
 	return ret;
 }
 #endif /* CONFIG_SMP */
-
-static inline int __deprecated stop_machine_run(int (*fn)(void *), void *data,
-						unsigned int cpu)
-{
-	/* If they don't care which cpu fn runs on, just pick one. */
-	if (cpu == NR_CPUS)
-		return stop_machine(fn, data, NULL);
-	else if (cpu == ~0U)
-		return stop_machine(fn, data, &cpu_possible_map);
-	else {
-		cpumask_t cpus = cpumask_of_cpu(cpu);
-		return stop_machine(fn, data, &cpus);
-	}
-}
 #endif /* _LINUX_STOP_MACHINE */
diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h
index ef2e3a20bf3..dc05b54bd3a 100644
--- a/include/linux/sunrpc/svc_rdma.h
+++ b/include/linux/sunrpc/svc_rdma.h
@@ -143,7 +143,6 @@ struct svcxprt_rdma {
 	unsigned long	     sc_flags;
 	struct list_head     sc_dto_q;		/* DTO tasklet I/O pending Q */
 	struct list_head     sc_read_complete_q;
-	spinlock_t           sc_read_complete_lock;
 	struct work_struct   sc_work;
 };
 /* sc_flags */
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index c6343509597..2ce8207686e 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -217,11 +217,11 @@ struct platform_hibernation_ops {
 #ifdef CONFIG_HIBERNATION
 /* kernel/power/snapshot.c */
 extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
-static inline void register_nosave_region(unsigned long b, unsigned long e)
+static inline void __init register_nosave_region(unsigned long b, unsigned long e)
 {
 	__register_nosave_region(b, e, 0);
 }
-static inline void register_nosave_region_late(unsigned long b, unsigned long e)
+static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
 {
 	__register_nosave_region(b, e, 1);
 }
diff --git a/include/linux/swab.h b/include/linux/swab.h
new file mode 100644
index 00000000000..270d5c208a8
--- /dev/null
+++ b/include/linux/swab.h
@@ -0,0 +1,309 @@
+#ifndef _LINUX_SWAB_H
+#define _LINUX_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+/*
+ * casts are necessary for constants, because we never know how for sure
+ * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
+ */
+#define __const_swab16(x) ((__u16)(				\
+	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
+	(((__u16)(x) & (__u16)0xff00U) >> 8)))
+
+#define __const_swab32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
+	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
+	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
+	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
+
+#define __const_swab64(x) ((__u64)(				\
+	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
+	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
+	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
+	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
+	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
+	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
+	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
+	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
+
+#define __const_swahw32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
+	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
+
+#define __const_swahb32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
+	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
+
+/*
+ * Implement the following as inlines, but define the interface using
+ * macros to allow constant folding when possible:
+ * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
+ */
+
+static inline __attribute_const__ __u16 ___swab16(__u16 val)
+{
+#ifdef __arch_swab16
+	return __arch_swab16(val);
+#elif defined(__arch_swab16p)
+	return __arch_swab16p(&val);
+#else
+	return __const_swab16(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 ___swab32(__u32 val)
+{
+#ifdef __arch_swab32
+	return __arch_swab32(val);
+#elif defined(__arch_swab32p)
+	return __arch_swab32p(&val);
+#else
+	return __const_swab32(val);
+#endif
+}
+
+static inline __attribute_const__ __u64 ___swab64(__u64 val)
+{
+#ifdef __arch_swab64
+	return __arch_swab64(val);
+#elif defined(__arch_swab64p)
+	return __arch_swab64p(&val);
+#elif defined(__SWAB_64_THRU_32__)
+	__u32 h = val >> 32;
+	__u32 l = val & ((1ULL << 32) - 1);
+	return (((__u64)___swab32(l)) << 32) | ((__u64)(___swab32(h)));
+#else
+	return __const_swab64(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 ___swahw32(__u32 val)
+{
+#ifdef __arch_swahw32
+	return __arch_swahw32(val);
+#elif defined(__arch_swahw32p)
+	return __arch_swahw32p(&val);
+#else
+	return __const_swahw32(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 ___swahb32(__u32 val)
+{
+#ifdef __arch_swahb32
+	return __arch_swahb32(val);
+#elif defined(__arch_swahb32p)
+	return __arch_swahb32p(&val);
+#else
+	return __const_swahb32(val);
+#endif
+}
+
+/**
+ * __swab16 - return a byteswapped 16-bit value
+ * @x: value to byteswap
+ */
+#define __swab16(x)				\
+	(__builtin_constant_p((__u16)(x)) ?	\
+	__const_swab16((x)) :			\
+	___swab16((x)))
+
+/**
+ * __swab32 - return a byteswapped 32-bit value
+ * @x: value to byteswap
+ */
+#define __swab32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	__const_swab32((x)) :			\
+	___swab32((x)))
+
+/**
+ * __swab64 - return a byteswapped 64-bit value
+ * @x: value to byteswap
+ */
+#define __swab64(x)				\
+	(__builtin_constant_p((__u64)(x)) ?	\
+	__const_swab64((x)) :			\
+	___swab64((x)))
+
+/**
+ * __swahw32 - return a word-swapped 32-bit value
+ * @x: value to wordswap
+ *
+ * __swahw32(0x12340000) is 0x00001234
+ */
+#define __swahw32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	__const_swahw32((x)) :			\
+	___swahw32((x)))
+
+/**
+ * __swahb32 - return a high and low byte-swapped 32-bit value
+ * @x: value to byteswap
+ *
+ * __swahb32(0x12345678) is 0x34127856
+ */
+#define __swahb32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	__const_swahb32((x)) :			\
+	___swahb32((x)))
+
+/**
+ * __swab16p - return a byteswapped 16-bit value from a pointer
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline __u16 __swab16p(const __u16 *p)
+{
+#ifdef __arch_swab16p
+	return __arch_swab16p(p);
+#else
+	return __swab16(*p);
+#endif
+}
+
+/**
+ * __swab32p - return a byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline __u32 __swab32p(const __u32 *p)
+{
+#ifdef __arch_swab32p
+	return __arch_swab32p(p);
+#else
+	return __swab32(*p);
+#endif
+}
+
+/**
+ * __swab64p - return a byteswapped 64-bit value from a pointer
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline __u64 __swab64p(const __u64 *p)
+{
+#ifdef __arch_swab64p
+	return __arch_swab64p(p);
+#else
+	return __swab64(*p);
+#endif
+}
+
+/**
+ * __swahw32p - return a wordswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping.
+ */
+static inline __u32 __swahw32p(const __u32 *p)
+{
+#ifdef __arch_swahw32p
+	return __arch_swahw32p(p);
+#else
+	return __swahw32(*p);
+#endif
+}
+
+/**
+ * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high/low byteswapping.
+ */
+static inline __u32 __swahb32p(const __u32 *p)
+{
+#ifdef __arch_swahb32p
+	return __arch_swahb32p(p);
+#else
+	return __swahb32(*p);
+#endif
+}
+
+/**
+ * __swab16s - byteswap a 16-bit value in-place
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline void __swab16s(__u16 *p)
+{
+#ifdef __arch_swab16s
+	__arch_swab16s(p);
+#else
+	*p = __swab16p(p);
+#endif
+}
+/**
+ * __swab32s - byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline void __swab32s(__u32 *p)
+{
+#ifdef __arch_swab32s
+	__arch_swab32s(p);
+#else
+	*p = __swab32p(p);
+#endif
+}
+
+/**
+ * __swab64s - byteswap a 64-bit value in-place
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline void __swab64s(__u64 *p)
+{
+#ifdef __arch_swab64s
+	__arch_swab64s(p);
+#else
+	*p = __swab64p(p);
+#endif
+}
+
+/**
+ * __swahw32s - wordswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping
+ */
+static inline void __swahw32s(__u32 *p)
+{
+#ifdef __arch_swahw32s
+	__arch_swahw32s(p);
+#else
+	*p = __swahw32p(p);
+#endif
+}
+
+/**
+ * __swahb32s - high and low byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high and low byte swapping
+ */
+static inline void __swahb32s(__u32 *p)
+{
+#ifdef __arch_swahb32s
+	__arch_swahb32s(p);
+#else
+	*p = __swahb32p(p);
+#endif
+}
+
+#ifdef __KERNEL__
+# define swab16 __swab16
+# define swab32 __swab32
+# define swab64 __swab64
+# define swahw32 __swahw32
+# define swahb32 __swahb32
+# define swab16p __swab16p
+# define swab32p __swab32p
+# define swab64p __swab64p
+# define swahw32p __swahw32p
+# define swahb32p __swahb32p
+# define swab16s __swab16s
+# define swab32s __swab32s
+# define swab64s __swab64s
+# define swahw32s __swahw32s
+# define swahb32s __swahb32s
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SWAB_H */
diff --git a/include/linux/tick.h b/include/linux/tick.h
index d3c02695dc5..8cf8cfe2cc9 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -74,10 +74,13 @@ extern struct tick_device *tick_get_device(int cpu);
 extern int tick_init_highres(void);
 extern int tick_program_event(ktime_t expires, int force);
 extern void tick_setup_sched_timer(void);
+# endif
+
+# if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
 extern void tick_cancel_sched_timer(int cpu);
 # else
 static inline void tick_cancel_sched_timer(int cpu) { }
-# endif /* HIGHRES */
+# endif
 
 # ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 extern struct tick_device *tick_get_broadcast_device(void);
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index b1875582c1a..6186a789d6c 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -272,7 +272,7 @@ static inline void tracehook_finish_clone(struct task_struct *child,
  * tracehook_report_clone_complete().  This must prevent the child from
  * self-reaping if tracehook_report_clone_complete() uses the @child
  * pointer; otherwise it might have died and been released by the time
- * tracehook_report_report_clone_complete() is called.
+ * tracehook_report_clone_complete() is called.
  *
  * Called with no locks held, but the child cannot run until this returns.
  */
@@ -280,7 +280,7 @@ static inline void tracehook_report_clone(int trace, struct pt_regs *regs,
 					  unsigned long clone_flags,
 					  pid_t pid, struct task_struct *child)
 {
-	if (unlikely(trace)) {
+	if (unlikely(trace) || unlikely(clone_flags & CLONE_PTRACE)) {
 		/*
 		 * The child starts up with an immediate SIGSTOP.
 		 */
@@ -487,14 +487,20 @@ static inline int tracehook_notify_jctl(int notify, int why)
 	return notify || (current->ptrace & PT_PTRACED);
 }
 
+#define DEATH_REAP			-1
+#define DEATH_DELAYED_GROUP_LEADER	-2
+
 /**
  * tracehook_notify_death - task is dead, ready to notify parent
  * @task:		@current task now exiting
  * @death_cookie:	value to pass to tracehook_report_death()
  * @group_dead:		nonzero if this was the last thread in the group to die
  *
- * Return the signal number to send our parent with do_notify_parent(), or
- * zero to send no signal and leave a zombie, or -1 to self-reap right now.
+ * A return value >= 0 means call do_notify_parent() with that signal
+ * number.  Negative return value can be %DEATH_REAP to self-reap right
+ * now, or %DEATH_DELAYED_GROUP_LEADER to a zombie without notifying our
+ * parent.  Note that a return value of 0 means a do_notify_parent() call
+ * that sends no signal, but still wakes up a parent blocked in wait*().
  *
  * Called with write_lock_irq(&tasklist_lock) held.
  */
@@ -502,7 +508,7 @@ static inline int tracehook_notify_death(struct task_struct *task,
 					 void **death_cookie, int group_dead)
 {
 	if (task->exit_signal == -1)
-		return task->ptrace ? SIGCHLD : -1;
+		return task->ptrace ? SIGCHLD : DEATH_REAP;
 
 	/*
 	 * If something other than our normal parent is ptracing us, then
@@ -512,21 +518,21 @@ static inline int tracehook_notify_death(struct task_struct *task,
 	if (thread_group_empty(task) && !ptrace_reparented(task))
 		return task->exit_signal;
 
-	return task->ptrace ? SIGCHLD : 0;
+	return task->ptrace ? SIGCHLD : DEATH_DELAYED_GROUP_LEADER;
 }
 
 /**
  * tracehook_report_death - task is dead and ready to be reaped
  * @task:		@current task now exiting
- * @signal:		signal number sent to parent, or 0 or -1
+ * @signal:		return value from tracheook_notify_death()
  * @death_cookie:	value passed back from tracehook_notify_death()
  * @group_dead:		nonzero if this was the last thread in the group to die
  *
  * Thread has just become a zombie or is about to self-reap.  If positive,
  * @signal is the signal number just sent to the parent (usually %SIGCHLD).
- * If @signal is -1, this thread will self-reap.  If @signal is 0, this is
- * a delayed_group_leader() zombie.  The @death_cookie was passed back by
- * tracehook_notify_death().
+ * If @signal is %DEATH_REAP, this thread will self-reap.  If @signal is
+ * %DEATH_DELAYED_GROUP_LEADER, this is a delayed_group_leader() zombie.
+ * The @death_cookie was passed back by tracehook_notify_death().
  *
  * If normal reaping is not inhibited, @task->exit_state might be changing
  * in parallel.
diff --git a/include/linux/tty.h b/include/linux/tty.h
index e3579cb086e..0cbec74ec08 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -331,6 +331,8 @@ extern int tty_write_room(struct tty_struct *tty);
 extern void tty_driver_flush_buffer(struct tty_struct *tty);
 extern void tty_throttle(struct tty_struct *tty);
 extern void tty_unthrottle(struct tty_struct *tty);
+extern int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+						struct winsize *ws);
 
 extern int is_current_pgrp_orphaned(void);
 extern struct pid *tty_get_pgrp(struct tty_struct *tty);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index e1065ac0d92..16d27944c32 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -168,6 +168,18 @@
  *
  *	Optional: If not provided then the write method is called under
  *	the atomic write lock to keep it serialized with the ldisc.
+ *
+ * int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty,
+ *				unsigned int rows, unsigned int cols);
+ *
+ *	Called when a termios request is issued which changes the
+ *	requested terminal geometry.
+ *
+ *	Optional: the default action is to update the termios structure
+ *	without error. This is usually the correct behaviour. Drivers should
+ *	not force errors here if they are not resizable objects (eg a serial
+ *	line). See tty_do_resize() if you need to wrap the standard method
+ *	in your own logic - the usual case.
  */
 
 #include <linux/fs.h>
@@ -206,6 +218,8 @@ struct tty_operations {
 	int (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int (*tiocmset)(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear);
+	int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty,
+				struct winsize *ws);
 #ifdef CONFIG_CONSOLE_POLL
 	int (*poll_init)(struct tty_driver *driver, int line, char *options);
 	int (*poll_get_char)(struct tty_driver *driver, int line);
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 5811c5da69f..94ac74aba6b 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -110,6 +110,10 @@ enum usb_interface_condition {
  * @sysfs_files_created: sysfs attributes exist
  * @needs_remote_wakeup: flag set when the driver requires remote-wakeup
  *	capability during autosuspend.
+ * @needs_altsetting0: flag set when a set-interface request for altsetting 0
+ *	has been deferred.
+ * @needs_binding: flag set when the driver should be re-probed or unbound
+ *	following a reset or suspend operation it doesn't support.
  * @dev: driver model's view of this device
  * @usb_dev: if an interface is bound to the USB major, this will point
  *	to the sysfs representation for that device.
@@ -160,6 +164,7 @@ struct usb_interface {
 	unsigned is_active:1;		/* the interface is not suspended */
 	unsigned sysfs_files_created:1;	/* the sysfs attributes exist */
 	unsigned needs_remote_wakeup:1;	/* driver requires remote wakeup */
+	unsigned needs_altsetting0:1;	/* switch to altsetting 0 is pending */
 	unsigned needs_binding:1;	/* needs delayed unbind/rebind */
 
 	struct device dev;		/* interface specific device info */
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
new file mode 100644
index 00000000000..630962c04ca
--- /dev/null
+++ b/include/linux/usb/musb.h
@@ -0,0 +1,98 @@
+/*
+ * This is used to for host and peripheral modes of the driver for
+ * Inventra (Multidrop) Highspeed Dual-Role Controllers:  (M)HDRC.
+ *
+ * Board initialization should put one of these into dev->platform_data,
+ * probably on some platform_device named "musb_hdrc".  It encapsulates
+ * key configuration differences between boards.
+ */
+
+/* The USB role is defined by the connector used on the board, so long as
+ * standards are being followed.  (Developer boards sometimes won't.)
+ */
+enum musb_mode {
+	MUSB_UNDEFINED = 0,
+	MUSB_HOST,		/* A or Mini-A connector */
+	MUSB_PERIPHERAL,	/* B or Mini-B connector */
+	MUSB_OTG		/* Mini-AB connector */
+};
+
+struct clk;
+
+struct musb_hdrc_eps_bits {
+	const char	name[16];
+	u8		bits;
+};
+
+struct musb_hdrc_config {
+	/* MUSB configuration-specific details */
+	unsigned	multipoint:1;	/* multipoint device */
+	unsigned	dyn_fifo:1;	/* supports dynamic fifo sizing */
+	unsigned	soft_con:1;	/* soft connect required */
+	unsigned	utm_16:1;	/* utm data witdh is 16 bits */
+	unsigned	big_endian:1;	/* true if CPU uses big-endian */
+	unsigned	mult_bulk_tx:1;	/* Tx ep required for multbulk pkts */
+	unsigned	mult_bulk_rx:1;	/* Rx ep required for multbulk pkts */
+	unsigned	high_iso_tx:1;	/* Tx ep required for HB iso */
+	unsigned	high_iso_rx:1;	/* Rx ep required for HD iso */
+	unsigned	dma:1;		/* supports DMA */
+	unsigned	vendor_req:1;	/* vendor registers required */
+
+	u8		num_eps;	/* number of endpoints _with_ ep0 */
+	u8		dma_channels;	/* number of dma channels */
+	u8		dyn_fifo_size;	/* dynamic size in bytes */
+	u8		vendor_ctrl;	/* vendor control reg width */
+	u8		vendor_stat;	/* vendor status reg witdh */
+	u8		dma_req_chan;	/* bitmask for required dma channels */
+	u8		ram_bits;	/* ram address size */
+
+	struct musb_hdrc_eps_bits *eps_bits;
+};
+
+struct musb_hdrc_platform_data {
+	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
+	u8		mode;
+
+	/* for clk_get() */
+	const char	*clock;
+
+	/* (HOST or OTG) switch VBUS on/off */
+	int		(*set_vbus)(struct device *dev, int is_on);
+
+	/* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
+	u8		power;
+
+	/* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
+	u8		min_power;
+
+	/* (HOST or OTG) msec/2 after VBUS on till power good */
+	u8		potpgt;
+
+	/* Power the device on or off */
+	int		(*set_power)(int state);
+
+	/* Turn device clock on or off */
+	int		(*set_clock)(struct clk *clock, int is_on);
+
+	/* MUSB configuration-specific details */
+	struct musb_hdrc_config	*config;
+};
+
+
+/* TUSB 6010 support */
+
+#define	TUSB6010_OSCCLK_60	16667	/* psec/clk @ 60.0 MHz */
+#define	TUSB6010_REFCLK_24	41667	/* psec/clk @ 24.0 MHz XI */
+#define	TUSB6010_REFCLK_19	52083	/* psec/clk @ 19.2 MHz CLKIN */
+
+#ifdef	CONFIG_ARCH_OMAP2
+
+extern int __init tusb6010_setup_interface(
+		struct musb_hdrc_platform_data *data,
+		unsigned ps_refclk, unsigned waitpin,
+		unsigned async_cs, unsigned sync_cs,
+		unsigned irq, unsigned dmachan);
+
+extern int tusb6010_platform_retime(unsigned is_refclk);
+
+#endif	/* OMAP2 */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 09a3e6a7518..655341d0f53 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -17,7 +17,8 @@
 #include <linux/mutex.h>
 
 #define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
-#define SERIAL_TTY_MINORS	255	/* loads of devices :) */
+#define SERIAL_TTY_MINORS	254	/* loads of devices :) */
+#define SERIAL_TTY_NO_MINOR	255	/* No minor was assigned */
 
 /* The maximum number of ports one device can grab at once */
 #define MAX_NUM_PORTS		8
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index e466bd54a50..303d93ffd6b 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -55,13 +55,13 @@
  */
 #ifndef __LINUX_VIDEODEV2_H
 #define __LINUX_VIDEODEV2_H
+
 #ifdef __KERNEL__
 #include <linux/time.h>     /* need struct timeval */
-#include <linux/compiler.h> /* need __user */
 #else
-#define __user
 #include <sys/time.h>
 #endif
+#include <linux/compiler.h>
 #include <linux/ioctl.h>
 #include <linux/types.h>
 
@@ -334,6 +334,8 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
 #define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
 #define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
+#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16  YVU 4:2:2     */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 364789aae9f..328eb402272 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -4,9 +4,9 @@
 #include <linux/spinlock.h>
 #include <asm/page.h>		/* pgprot_t */
 
-struct vm_area_struct;
+struct vm_area_struct;		/* vma defining user mapping in mm_types.h */
 
-/* bits in vm_struct->flags */
+/* bits in flags of vmalloc's vm_struct below */
 #define VM_IOREMAP	0x00000001	/* ioremap() and friends */
 #define VM_ALLOC	0x00000002	/* vmalloc() */
 #define VM_MAP		0x00000004	/* vmap()ed pages */
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 14c0e91be9b..1cbd0a7db4e 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -35,7 +35,6 @@ extern int fg_console, last_console, want_console;
 int vc_allocate(unsigned int console);
 int vc_cons_allocated(unsigned int console);
 int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
-int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
 void vc_deallocate(unsigned int console);
 void reset_palette(struct vc_data *vc);
 void do_blank_screen(int entering_gfx);
@@ -74,7 +73,7 @@ void con_protect_unimap(struct vc_data *vc, int rdonly);
 int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
 
 #define vc_translate(vc, c) ((vc)->vc_translate[(c) |			\
-					(vc)->vc_toggle_meta ? 0x80 : 0])
+					((vc)->vc_toggle_meta ? 0x80 : 0)])
 #else
 #define con_set_trans_old(arg) (0)
 #define con_get_trans_old(arg) (-EINVAL)
@@ -86,6 +85,7 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
 #define con_copy_unimap(d, s) (0)
 #define con_get_unimap(vc, ct, uct, list) (-EINVAL)
 #define con_free_unimap(vc) do { ; } while (0)
+#define con_protect_unimap(vc, rdonly) do { ; } while (0)
 
 #define vc_translate(vc, c) (c)
 #endif
diff --git a/include/media/audiochip.h b/include/media/audiochip.h
deleted file mode 100644
index e69de29bb2d..00000000000
--- a/include/media/audiochip.h
+++ /dev/null
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 1de98f150e9..d548de32672 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -14,6 +14,7 @@
 
 #include <linux/videodev2.h>
 #include <media/videobuf-core.h>
+#include <linux/pm.h>
 
 struct soc_camera_device {
 	struct list_head list;
@@ -63,6 +64,8 @@ struct soc_camera_host_ops {
 	struct module *owner;
 	int (*add)(struct soc_camera_device *);
 	void (*remove)(struct soc_camera_device *);
+	int (*suspend)(struct soc_camera_device *, pm_message_t state);
+	int (*resume)(struct soc_camera_device *);
 	int (*set_fmt_cap)(struct soc_camera_device *, __u32,
 			   struct v4l2_rect *);
 	int (*try_fmt_cap)(struct soc_camera_device *, struct v4l2_format *);
@@ -111,6 +114,8 @@ struct soc_camera_ops {
 	struct module *owner;
 	int (*probe)(struct soc_camera_device *);
 	void (*remove)(struct soc_camera_device *);
+	int (*suspend)(struct soc_camera_device *, pm_message_t state);
+	int (*resume)(struct soc_camera_device *);
 	int (*init)(struct soc_camera_device *);
 	int (*release)(struct soc_camera_device *);
 	int (*start_capture)(struct soc_camera_device *);
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 06b28142b3a..c216de528b0 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -80,7 +80,8 @@ extern struct inet6_ifaddr      *ipv6_get_ifaddr(struct net *net,
 						 struct net_device *dev,
 						 int strict);
 
-extern int			ipv6_dev_get_saddr(struct net_device *dev, 
+extern int			ipv6_dev_get_saddr(struct net *net,
+					       struct net_device *dev,
 					       const struct in6_addr *daddr,
 					       unsigned int srcprefs,
 					       struct in6_addr *saddr);
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index cbf75109468..46a43b721dd 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -325,7 +325,8 @@ int hci_conn_del(struct hci_conn *conn);
 void hci_conn_hash_flush(struct hci_dev *hdev);
 void hci_conn_check_pending(struct hci_dev *hdev);
 
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *src);
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 auth_type);
+int hci_conn_check_link_mode(struct hci_conn *conn);
 int hci_conn_auth(struct hci_conn *conn);
 int hci_conn_encrypt(struct hci_conn *conn);
 int hci_conn_change_link_key(struct hci_conn *conn);
diff --git a/include/net/dst.h b/include/net/dst.h
index c5c318a628f..8a8b71e5f3f 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -252,17 +252,7 @@ static inline int dst_output(struct sk_buff *skb)
 /* Input packet from network to transport.  */
 static inline int dst_input(struct sk_buff *skb)
 {
-	int err;
-
-	for (;;) {
-		err = skb->dst->input(skb);
-
-		if (likely(err == 0))
-			return err;
-		/* Oh, Jamal... Seems, I will not forgive you this mess. :-) */
-		if (unlikely(err != NET_XMIT_BYPASS))
-			return err;
-	}
+	return skb->dst->input(skb);
 }
 
 static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie)
diff --git a/include/net/flow.h b/include/net/flow.h
index ad16e0076c8..228b2477cee 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -47,7 +47,6 @@ struct flowi {
 #define fl4_scope	nl_u.ip4_u.scope
 
 	__u8	proto;
-	__u8	flags;
 	union {
 		struct {
 			__be16	sport;
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index 95c660c9719..91324908fcc 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -208,6 +208,9 @@ extern void inet_twsk_schedule(struct inet_timewait_sock *tw,
 extern void inet_twsk_deschedule(struct inet_timewait_sock *tw,
 				 struct inet_timewait_death_row *twdr);
 
+extern void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo,
+			    struct inet_timewait_death_row *twdr, int family);
+
 static inline
 struct net *twsk_net(const struct inet_timewait_sock *twsk)
 {
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 2f8b3c06a10..5f53db7e4e5 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -38,11 +38,6 @@ struct route_info {
 #define RT6_LOOKUP_F_SRCPREF_COA	0x00000020
 
 
-#ifdef CONFIG_IPV6_MULTIPLE_TABLES
-extern struct rt6_info	*ip6_prohibit_entry;
-extern struct rt6_info	*ip6_blk_hole_entry;
-#endif
-
 extern void			ip6_route_input(struct sk_buff *skb);
 
 extern struct dst_entry *	ip6_route_output(struct net *net,
@@ -112,13 +107,13 @@ struct rt6_rtnl_dump_arg
 {
 	struct sk_buff *skb;
 	struct netlink_callback *cb;
+	struct net *net;
 };
 
 extern int rt6_dump_route(struct rt6_info *rt, void *p_arg);
 extern void rt6_ifdown(struct net *net, struct net_device *dev);
 extern void rt6_mtu_change(struct net_device *dev, unsigned mtu);
 
-extern rwlock_t rt6_lock;
 
 /*
  *	Store a destination cache entry in a socket
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 9a51ebad3f1..7312c3dd309 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -3,254 +3,17 @@
  *      data structure and functionality definitions
  */
 
-#ifndef _IP_VS_H
-#define _IP_VS_H
-
-#include <asm/types.h>		/* For __uXX types */
-#include <linux/types.h>	/* For __beXX types in userland */
-
-#include <linux/sysctl.h>	/* For ctl_path */
-
-#define IP_VS_VERSION_CODE	0x010201
-#define NVERSION(version)			\
-	(version >> 16) & 0xFF,			\
-	(version >> 8) & 0xFF,			\
-	version & 0xFF
-
-/*
- *      Virtual Service Flags
- */
-#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
-#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
-
-/*
- *      Destination Server Flags
- */
-#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
-#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
-
-/*
- *      IPVS sync daemon states
- */
-#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
-#define IP_VS_STATE_MASTER	0x0001		/* started as master */
-#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
-
-/*
- *      IPVS socket options
- */
-#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
-
-#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
-#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
-#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
-#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
-#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
-#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
-#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
-#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
-#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
-#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
-#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
-#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
-#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
-#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
-#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
-#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
-#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
-
-#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
-#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
-#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
-#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
-#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
-#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
-#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
-#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
-#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
-
-
-/*
- *      IPVS Connection Flags
- */
-#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
-#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
-#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
-#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
-#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
-#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
-#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
-#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
-#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
-#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
-#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
-#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
-#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
-#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
-#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
-
-/* Move it to better place one day, for now keep it unique */
-#define NFC_IPVS_PROPERTY	0x10000
-
-#define IP_VS_SCHEDNAME_MAXLEN	16
-#define IP_VS_IFNAME_MAXLEN	16
-
-
-/*
- *	The struct ip_vs_service_user and struct ip_vs_dest_user are
- *	used to set IPVS rules through setsockopt.
- */
-struct ip_vs_service_user {
-	/* virtual service addresses */
-	u_int16_t		protocol;
-	__be32			addr;		/* virtual ip address */
-	__be16			port;
-	u_int32_t		fwmark;		/* firwall mark of service */
-
-	/* virtual service options */
-	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
-	unsigned		flags;		/* virtual service flags */
-	unsigned		timeout;	/* persistent timeout in sec */
-	__be32			netmask;	/* persistent netmask */
-};
-
-
-struct ip_vs_dest_user {
-	/* destination server address */
-	__be32			addr;
-	__be16			port;
-
-	/* real server options */
-	unsigned		conn_flags;	/* connection flags */
-	int			weight;		/* destination weight */
-
-	/* thresholds for active connections */
-	u_int32_t		u_threshold;	/* upper threshold */
-	u_int32_t		l_threshold;	/* lower threshold */
-};
-
-
-/*
- *	IPVS statistics object (for user space)
- */
-struct ip_vs_stats_user
-{
-	__u32                   conns;          /* connections scheduled */
-	__u32                   inpkts;         /* incoming packets */
-	__u32                   outpkts;        /* outgoing packets */
-	__u64                   inbytes;        /* incoming bytes */
-	__u64                   outbytes;       /* outgoing bytes */
-
-	__u32			cps;		/* current connection rate */
-	__u32			inpps;		/* current in packet rate */
-	__u32			outpps;		/* current out packet rate */
-	__u32			inbps;		/* current in byte rate */
-	__u32			outbps;		/* current out byte rate */
-};
-
-
-/* The argument to IP_VS_SO_GET_INFO */
-struct ip_vs_getinfo {
-	/* version number */
-	unsigned int		version;
-
-	/* size of connection hash table */
-	unsigned int		size;
-
-	/* number of virtual services */
-	unsigned int		num_services;
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICE */
-struct ip_vs_service_entry {
-	/* which service: user fills in these */
-	u_int16_t		protocol;
-	__be32			addr;		/* virtual address */
-	__be16			port;
-	u_int32_t		fwmark;		/* firwall mark of service */
-
-	/* service options */
-	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
-	unsigned		flags;          /* virtual service flags */
-	unsigned		timeout;	/* persistent timeout */
-	__be32			netmask;	/* persistent netmask */
-
-	/* number of real servers */
-	unsigned int		num_dests;
-
-	/* statistics */
-	struct ip_vs_stats_user stats;
-};
-
-
-struct ip_vs_dest_entry {
-	__be32			addr;		/* destination address */
-	__be16			port;
-	unsigned		conn_flags;	/* connection flags */
-	int			weight;		/* destination weight */
-
-	u_int32_t		u_threshold;	/* upper threshold */
-	u_int32_t		l_threshold;	/* lower threshold */
-
-	u_int32_t		activeconns;	/* active connections */
-	u_int32_t		inactconns;	/* inactive connections */
-	u_int32_t		persistconns;	/* persistent connections */
-
-	/* statistics */
-	struct ip_vs_stats_user stats;
-};
-
-
-/* The argument to IP_VS_SO_GET_DESTS */
-struct ip_vs_get_dests {
-	/* which service: user fills in these */
-	u_int16_t		protocol;
-	__be32			addr;		/* virtual address */
-	__be16			port;
-	u_int32_t		fwmark;		/* firwall mark of service */
-
-	/* number of real servers */
-	unsigned int		num_dests;
-
-	/* the real servers */
-	struct ip_vs_dest_entry	entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICES */
-struct ip_vs_get_services {
-	/* number of virtual services */
-	unsigned int		num_services;
-
-	/* service table */
-	struct ip_vs_service_entry entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_TIMEOUT */
-struct ip_vs_timeout_user {
-	int			tcp_timeout;
-	int			tcp_fin_timeout;
-	int			udp_timeout;
-};
-
-
-/* The argument to IP_VS_SO_GET_DAEMON */
-struct ip_vs_daemon_user {
-	/* sync daemon state (master/backup) */
-	int			state;
-
-	/* multicast interface name */
-	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
-
-	/* SyncID we belong to */
-	int			syncid;
-};
+#ifndef _NET_IP_VS_H
+#define _NET_IP_VS_H
 
+#include <linux/ip_vs.h>                /* definitions shared with userland */
 
+/* old ipvsadm versions still include this file directly */
 #ifdef __KERNEL__
 
+#include <asm/types.h>                  /* for __uXX types */
+
+#include <linux/sysctl.h>               /* for ctl_path */
 #include <linux/list.h>                 /* for struct list_head */
 #include <linux/spinlock.h>             /* for struct rwlock_t */
 #include <asm/atomic.h>                 /* for struct atomic_t */
@@ -377,8 +140,24 @@ struct ip_vs_seq {
 
 
 /*
- *	IPVS statistics object
+ *	IPVS statistics objects
  */
+struct ip_vs_estimator {
+	struct list_head	list;
+
+	u64			last_inbytes;
+	u64			last_outbytes;
+	u32			last_conns;
+	u32			last_inpkts;
+	u32			last_outpkts;
+
+	u32			cps;
+	u32			inpps;
+	u32			outpps;
+	u32			inbps;
+	u32			outbps;
+};
+
 struct ip_vs_stats
 {
 	__u32                   conns;          /* connections scheduled */
@@ -393,7 +172,15 @@ struct ip_vs_stats
 	__u32			inbps;		/* current in byte rate */
 	__u32			outbps;		/* current out byte rate */
 
+	/*
+	 * Don't add anything before the lock, because we use memcpy() to copy
+	 * the members before the lock to struct ip_vs_stats_user in
+	 * ip_vs_ctl.c.
+	 */
+
 	spinlock_t              lock;           /* spin lock */
+
+	struct ip_vs_estimator	est;		/* estimator */
 };
 
 struct dst_entry;
@@ -677,7 +464,7 @@ struct ip_vs_app
  */
 extern const char *ip_vs_proto_name(unsigned proto);
 extern void ip_vs_init_hash_table(struct list_head *table, int rows);
-#define IP_VS_INIT_HASH_TABLE(t) ip_vs_init_hash_table(t, sizeof(t)/sizeof(t[0]))
+#define IP_VS_INIT_HASH_TABLE(t) ip_vs_init_hash_table((t), ARRAY_SIZE((t)))
 
 #define IP_VS_APP_TYPE_FTP	1
 
@@ -857,7 +644,7 @@ extern int sysctl_ip_vs_expire_quiescent_template;
 extern int sysctl_ip_vs_sync_threshold[2];
 extern int sysctl_ip_vs_nat_icmp_send;
 extern struct ip_vs_stats ip_vs_stats;
-extern struct ctl_path net_vs_ctl_path[];
+extern const struct ctl_path net_vs_ctl_path[];
 
 extern struct ip_vs_service *
 ip_vs_service_get(__u32 fwmark, __u16 protocol, __be32 vaddr, __be16 vport);
@@ -896,7 +683,7 @@ extern void ip_vs_sync_conn(struct ip_vs_conn *cp);
 /*
  *      IPVS rate estimator prototypes (from ip_vs_est.c)
  */
-extern int ip_vs_new_estimator(struct ip_vs_stats *stats);
+extern void ip_vs_new_estimator(struct ip_vs_stats *stats);
 extern void ip_vs_kill_estimator(struct ip_vs_stats *stats);
 extern void ip_vs_zero_estimator(struct ip_vs_stats *stats);
 
@@ -981,4 +768,4 @@ static inline __wsum ip_vs_check_diff2(__be16 old, __be16 new, __wsum oldsum)
 
 #endif /* __KERNEL__ */
 
-#endif	/* _IP_VS_H */
+#endif	/* _NET_IP_VS_H */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4dd3d93e196..ff137fd7714 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -177,9 +177,10 @@ enum ieee80211_bss_change {
  * @aid: association ID number, valid only when @assoc is true
  * @use_cts_prot: use CTS protection
  * @use_short_preamble: use 802.11b short preamble
+ * @dtim_period: num of beacons before the next DTIM, for PSM
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
- * @assoc_capability: capabbilities taken from assoc resp
+ * @assoc_capability: capabilities taken from assoc resp
  * @assoc_ht: association in HT mode
  * @ht_conf: ht capabilities
  * @ht_bss_conf: ht extended capabilities
@@ -191,6 +192,7 @@ struct ieee80211_bss_conf {
 	/* erp related data */
 	bool use_cts_prot;
 	bool use_short_preamble;
+	u8 dtim_period;
 	u16 beacon_int;
 	u16 assoc_capability;
 	u64 timestamp;
@@ -206,8 +208,6 @@ struct ieee80211_bss_conf {
  * These flags are used with the @flags member of &ieee80211_tx_info.
  *
  * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
- * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption;
- *	e.g., for EAPOL frame
  * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame
  * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
  *	for combined 802.11g / 802.11b networks)
@@ -220,7 +220,6 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD
  * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the
  *	through set_retry_limit configured long retry value
- * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211
  * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
  * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
  * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
@@ -253,7 +252,6 @@ struct ieee80211_bss_conf {
  */
 enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
-	IEEE80211_TX_CTL_DO_NOT_ENCRYPT		= BIT(1),
 	IEEE80211_TX_CTL_USE_RTS_CTS		= BIT(2),
 	IEEE80211_TX_CTL_USE_CTS_PROTECT	= BIT(3),
 	IEEE80211_TX_CTL_NO_ACK			= BIT(4),
@@ -263,7 +261,6 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_FIRST_FRAGMENT		= BIT(8),
 	IEEE80211_TX_CTL_SHORT_PREAMBLE		= BIT(9),
 	IEEE80211_TX_CTL_LONG_RETRY_LIMIT	= BIT(10),
-	IEEE80211_TX_CTL_EAPOL_FRAME		= BIT(11),
 	IEEE80211_TX_CTL_SEND_AFTER_DTIM	= BIT(12),
 	IEEE80211_TX_CTL_AMPDU			= BIT(13),
 	IEEE80211_TX_CTL_OFDM_HT		= BIT(14),
@@ -323,7 +320,6 @@ struct ieee80211_tx_info {
 			struct ieee80211_vif *vif;
 			struct ieee80211_key_conf *hw_key;
 			unsigned long jiffies;
-			int ifindex;
 			u16 aid;
 			s8 rts_cts_rate_idx, alt_retry_rate_idx;
 			u8 retry_limit;
@@ -436,6 +432,7 @@ enum ieee80211_conf_flags {
  * @radio_enabled: when zero, driver is required to switch off the radio.
  *	TODO make a flag
  * @beacon_int: beacon interval (TODO make interface config)
+ * @listen_interval: listen interval in units of beacon interval
  * @flags: configuration flags defined above
  * @power_level: requested transmit power (in dBm)
  * @max_antenna_gain: maximum antenna gain (in dBi)
@@ -450,6 +447,7 @@ struct ieee80211_conf {
 	int radio_enabled;
 
 	int beacon_int;
+	u16 listen_interval;
 	u32 flags;
 	int power_level;
 	int max_antenna_gain;
@@ -710,10 +708,7 @@ enum ieee80211_tkip_key_type {
  *	rely on the host system for such buffering. This option is used
  *	to configure the IEEE 802.11 upper layer to buffer broadcast and
  *	multicast frames when there are power saving stations so that
- *	the driver can fetch them with ieee80211_get_buffered_bc(). Note
- *	that not setting this flag works properly only when the
- *	%IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is also not set because
- *	otherwise the stack will not know when the DTIM beacon was sent.
+ *	the driver can fetch them with ieee80211_get_buffered_bc().
  *
  * @IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE:
  *	Hardware is not capable of short slot operation on the 2.4 GHz band.
@@ -746,7 +741,6 @@ enum ieee80211_tkip_key_type {
  * 	Measurement, Channel Switch, Quieting, TPC
  */
 enum ieee80211_hw_flags {
-	IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE		= 1<<0,
 	IEEE80211_HW_RX_INCLUDES_FCS			= 1<<1,
 	IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING	= 1<<2,
 	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE		= 1<<3,
@@ -792,6 +786,9 @@ enum ieee80211_hw_flags {
  * @max_signal: Maximum value for signal (rssi) in RX information, used
  *     only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
  *
+ * @max_listen_interval: max listen interval in units of beacon interval
+ *     that HW supports
+ *
  * @queues: number of available hardware transmit queues for
  *	data packets. WMM/QoS requires at least four, these
  *	queues need to have configurable access parameters.
@@ -819,7 +816,9 @@ struct ieee80211_hw {
 	unsigned int extra_tx_headroom;
 	int channel_change_time;
 	int vif_data_size;
-	u16 queues, ampdu_queues;
+	u16 queues;
+	u16 ampdu_queues;
+	u16 max_listen_interval;
 	s8 max_signal;
 };
 
@@ -1097,10 +1096,8 @@ enum ieee80211_ampdu_mlme_action {
  *	See the section "Frame filtering" for more information.
  *	This callback must be implemented and atomic.
  *
- * @set_tim: Set TIM bit. If the hardware/firmware takes care of beacon
- *	generation (that is, %IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is set)
- *	mac80211 calls this function when a TIM bit must be set or cleared
- *	for a given AID. Must be atomic.
+ * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
+ * 	must be set or cleared for a given AID. Must be atomic.
  *
  * @set_key: See the section "Hardware crypto acceleration"
  *	This callback can sleep, and is only called between add_interface
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 18024b8cecb..208fe5a3854 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -702,7 +702,7 @@ static inline int nla_len(const struct nlattr *nla)
  */
 static inline int nla_ok(const struct nlattr *nla, int remaining)
 {
-	return remaining >= sizeof(*nla) &&
+	return remaining >= (int) sizeof(*nla) &&
 	       nla->nla_len >= sizeof(*nla) &&
 	       nla->nla_len <= remaining;
 }
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 6affcfaa123..b786a5b0925 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -78,6 +78,7 @@ extern struct Qdisc *fifo_create_dflt(struct Qdisc *sch, struct Qdisc_ops *ops,
 
 extern int register_qdisc(struct Qdisc_ops *qops);
 extern int unregister_qdisc(struct Qdisc_ops *qops);
+extern void qdisc_list_del(struct Qdisc *q);
 extern struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle);
 extern struct Qdisc *qdisc_lookup_class(struct net_device *dev, u32 handle);
 extern struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r,
@@ -89,7 +90,10 @@ extern void __qdisc_run(struct Qdisc *q);
 
 static inline void qdisc_run(struct Qdisc *q)
 {
-	if (!test_and_set_bit(__QDISC_STATE_RUNNING, &q->state))
+	struct netdev_queue *txq = q->dev_queue;
+
+	if (!netif_tx_queue_stopped(txq) &&
+	    !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state))
 		__qdisc_run(q);
 }
 
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index 8d6e991ef4d..cac811e51f6 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -33,7 +33,7 @@ struct request_sock_ops {
 	struct kmem_cache	*slab;
 	int		(*rtx_syn_ack)(struct sock *sk,
 				       struct request_sock *req);
-	void		(*send_ack)(struct sk_buff *skb,
+	void		(*send_ack)(struct sock *sk, struct sk_buff *skb,
 				    struct request_sock *req);
 	void		(*send_reset)(struct sock *sk,
 				      struct sk_buff *skb);
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index b5f40d7ef72..e5569625d2a 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -27,6 +27,7 @@ enum qdisc_state_t
 {
 	__QDISC_STATE_RUNNING,
 	__QDISC_STATE_SCHED,
+	__QDISC_STATE_DEACTIVATED,
 };
 
 struct qdisc_size_table {
@@ -60,7 +61,6 @@ struct Qdisc
 	struct gnet_stats_basic	bstats;
 	struct gnet_stats_queue	qstats;
 	struct gnet_stats_rate_est	rate_est;
-	struct rcu_head 	q_rcu;
 	int			(*reshape_fail)(struct sk_buff *skb,
 					struct Qdisc *q);
 
@@ -193,10 +193,35 @@ static inline struct Qdisc *qdisc_root(struct Qdisc *qdisc)
 	return qdisc->dev_queue->qdisc;
 }
 
+static inline struct Qdisc *qdisc_root_sleeping(struct Qdisc *qdisc)
+{
+	return qdisc->dev_queue->qdisc_sleeping;
+}
+
+/* The qdisc root lock is a mechanism by which to top level
+ * of a qdisc tree can be locked from any qdisc node in the
+ * forest.  This allows changing the configuration of some
+ * aspect of the qdisc tree while blocking out asynchronous
+ * qdisc access in the packet processing paths.
+ *
+ * It is only legal to do this when the root will not change
+ * on us.  Otherwise we'll potentially lock the wrong qdisc
+ * root.  This is enforced by holding the RTNL semaphore, which
+ * all users of this lock accessor must do.
+ */
 static inline spinlock_t *qdisc_root_lock(struct Qdisc *qdisc)
 {
 	struct Qdisc *root = qdisc_root(qdisc);
 
+	ASSERT_RTNL();
+	return qdisc_lock(root);
+}
+
+static inline spinlock_t *qdisc_root_sleeping_lock(struct Qdisc *qdisc)
+{
+	struct Qdisc *root = qdisc_root_sleeping(qdisc);
+
+	ASSERT_RTNL();
 	return qdisc_lock(root);
 }
 
@@ -207,12 +232,12 @@ static inline struct net_device *qdisc_dev(struct Qdisc *qdisc)
 
 static inline void sch_tree_lock(struct Qdisc *q)
 {
-	spin_lock_bh(qdisc_root_lock(q));
+	spin_lock_bh(qdisc_root_sleeping_lock(q));
 }
 
 static inline void sch_tree_unlock(struct Qdisc *q)
 {
-	spin_unlock_bh(qdisc_root_lock(q));
+	spin_unlock_bh(qdisc_root_sleeping_lock(q));
 }
 
 #define tcf_tree_lock(tp)	sch_tree_lock((tp)->q)
@@ -331,6 +356,18 @@ static inline unsigned int qdisc_pkt_len(struct sk_buff *skb)
 	return qdisc_skb_cb(skb)->pkt_len;
 }
 
+/* additional qdisc xmit flags (NET_XMIT_MASK in linux/netdevice.h) */
+enum net_xmit_qdisc_t {
+	__NET_XMIT_STOLEN = 0x00010000,
+	__NET_XMIT_BYPASS = 0x00020000,
+};
+
+#ifdef CONFIG_NET_CLS_ACT
+#define net_xmit_drop_count(e)	((e) & __NET_XMIT_STOLEN ? 0 : 1)
+#else
+#define net_xmit_drop_count(e)	(1)
+#endif
+
 static inline int qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 {
 #ifdef CONFIG_NET_SCHED
@@ -343,7 +380,7 @@ static inline int qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 static inline int qdisc_enqueue_root(struct sk_buff *skb, struct Qdisc *sch)
 {
 	qdisc_skb_cb(skb)->pkt_len = skb->len;
-	return qdisc_enqueue(skb, sch);
+	return qdisc_enqueue(skb, sch) & NET_XMIT_MASK;
 }
 
 static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch,
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 535a18f57a1..ab1c472ea75 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -524,8 +524,7 @@ static inline void sctp_ssn_skip(struct sctp_stream *stream, __u16 id,
  */
 struct sctp_af {
 	int		(*sctp_xmit)	(struct sk_buff *skb,
-					 struct sctp_transport *,
-					 int ipfragok);
+					 struct sctp_transport *);
 	int		(*setsockopt)	(struct sock *sk,
 					 int level,
 					 int optname,
diff --git a/include/net/syncppp.h b/include/net/syncppp.h
index e43f4070d89..9e306f7f579 100644
--- a/include/net/syncppp.h
+++ b/include/net/syncppp.h
@@ -43,8 +43,6 @@ struct sppp
 	u32		pp_rseq;	/* remote sequence number */
 	struct slcp	lcp;		/* LCP params */
 	struct sipcp	ipcp;		/* IPCP params */
-	u32		ibytes,obytes;	/* Bytes in/out */
-	u32		ipkts,opkts;	/* Packets in/out */
 	struct timer_list	pp_timer;
 	struct net_device	*pp_if;
 	char		pp_link_state;	/* Link status */
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index df7faf09d66..c6b2962315b 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -71,12 +71,8 @@ enum rdma_port_space {
 };
 
 struct rdma_addr {
-	struct sockaddr src_addr;
-	u8		src_pad[sizeof(struct sockaddr_in6) -
-				sizeof(struct sockaddr)];
-	struct sockaddr dst_addr;
-	u8		dst_pad[sizeof(struct sockaddr_in6) -
-				sizeof(struct sockaddr)];
+	struct sockaddr_storage src_addr;
+	struct sockaddr_storage dst_addr;
 	struct rdma_dev_addr dev_addr;
 };
 
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 5c40cc537d4..192f8716aa9 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -309,6 +309,20 @@ struct scsi_lun {
 };
 
 /*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(unsigned int lun)
+{
+	return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
+/*
  *  MESSAGE CODES
  */
 
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 291d56a1916..80b2e93c293 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -6,6 +6,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/blkdev.h>
+#include <scsi/scsi.h>
 #include <asm/atomic.h>
 
 struct request_queue;
@@ -426,7 +427,7 @@ static inline int scsi_device_enclosure(struct scsi_device *sdev)
 
 static inline int scsi_device_protection(struct scsi_device *sdev)
 {
-	return sdev->inquiry[5] & (1<<0);
+	return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
 }
 
 #define MODULE_ALIAS_SCSI_DEVICE(type) \
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 3030fdc6981..c1b26fcc0b5 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -202,6 +202,9 @@ struct snd_soc_dapm_path;
 struct snd_soc_dapm_pin;
 struct snd_soc_dapm_route;
 
+int dapm_reg_event(struct snd_soc_dapm_widget *w,
+		   struct snd_kcontrol *kcontrol, int event);
+
 /* dapm controls */
 int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 613173b5db6..920c4e9cb93 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -41,6 +41,7 @@ struct atmel_lcdfb_info {
 	struct work_struct	task;
 
 	unsigned int		guard_time;
+	unsigned int 		smem_len;
 	struct platform_device	*pdev;
 	struct clk		*bus_clk;
 	struct clk		*lcdc_clk;
diff --git a/include/video/radeon.h b/include/video/radeon.h
index 83467e18f5e..099ffa5e5be 100644
--- a/include/video/radeon.h
+++ b/include/video/radeon.h
@@ -527,8 +527,9 @@
 
 
 /* DSTCACHE_CTLSTAT bit constants */
-#define RB2D_DC_FLUSH				   (3 << 0)
-#define RB2D_DC_FLUSH_ALL			   0xf
+#define RB2D_DC_FLUSH_2D			   (1 << 0)
+#define RB2D_DC_FREE_2D				   (1 << 2)
+#define RB2D_DC_FLUSH_ALL			   (RB2D_DC_FLUSH_2D | RB2D_DC_FREE_2D)
 #define RB2D_DC_BUSY				   (1 << 31)
 
 
@@ -741,6 +742,10 @@
 #define SOFT_RESET_RB           		   (1 <<  6)
 #define SOFT_RESET_HDP          		   (1 <<  7)
 
+/* WAIT_UNTIL bit constants */
+#define WAIT_DMA_GUI_IDLE			   (1 << 9)
+#define WAIT_2D_IDLECLEAN			   (1 << 16)
+
 /* SURFACE_CNTL bit consants */
 #define SURF_TRANSLATION_DIS			   (1 << 8)
 #define NONSURF_AP0_SWP_16BPP			   (1 << 20)
diff --git a/init/Kconfig b/init/Kconfig
index 250e02c8f8f..c11da38837e 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -522,7 +522,7 @@ config CC_OPTIMIZE_FOR_SIZE
 	  Enabling this option will pass "-Os" instead of "-O2" to gcc
 	  resulting in a smaller kernel.
 
-	  If unsure, say N.
+	  If unsure, say Y.
 
 config SYSCTL
 	bool
@@ -558,17 +558,6 @@ config SYSCTL_SYSCALL
 
 	  If unsure say Y here.
 
-config SYSCTL_SYSCALL_CHECK
-	bool "Sysctl checks" if EMBEDDED
-	depends on SYSCTL_SYSCALL
-	default y
-	---help---
-	  sys_sysctl uses binary paths that have been found challenging
-	  to properly maintain and use. This enables checks that help
-	  you to keep things correct.
-
-	  If unsure say Y here.
-
 config KALLSYMS
 	 bool "Load all symbols for debugging/ksymoops" if EMBEDDED
 	 default y
@@ -845,9 +834,10 @@ menuconfig MODULES
 
 	  If unsure, say Y.
 
+if MODULES
+
 config MODULE_FORCE_LOAD
 	bool "Forced module loading"
-	depends on MODULES
 	default n
 	help
 	  Allow loading of modules without version information (ie. modprobe
@@ -856,7 +846,6 @@ config MODULE_FORCE_LOAD
 
 config MODULE_UNLOAD
 	bool "Module unloading"
-	depends on MODULES
 	help
 	  Without this option you will not be able to unload any
 	  modules (note that some modules may not be unloadable
@@ -875,7 +864,6 @@ config MODULE_FORCE_UNLOAD
 
 config MODVERSIONS
 	bool "Module versioning support"
-	depends on MODULES
 	help
 	  Usually, you have to use modules compiled with your kernel.
 	  Saying Y here makes it sometimes possible to use modules
@@ -886,7 +874,6 @@ config MODVERSIONS
 
 config MODULE_SRCVERSION_ALL
 	bool "Source checksum for all modules"
-	depends on MODULES
 	help
 	  Modules which contain a MODULE_VERSION get an extra "srcversion"
 	  field inserted into their modinfo section, which contains a
@@ -898,11 +885,12 @@ config MODULE_SRCVERSION_ALL
 
 config KMOD
 	def_bool y
-	depends on MODULES
 	help
 	  This is being removed soon.  These days, CONFIG_MODULES
 	  implies CONFIG_KMOD, so use that instead.
 
+endif # MODULES
+
 config STOP_MACHINE
 	bool
 	default y
diff --git a/init/calibrate.c b/init/calibrate.c
index 7963e3fc51d..a379c906119 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -170,7 +170,7 @@ void __cpuinit calibrate_delay(void)
 				loops_per_jiffy &= ~loopbit;
 		}
 	}
-	printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n",
+	printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n",
 			loops_per_jiffy/(500000/HZ),
 			(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
 }
diff --git a/init/main.c b/init/main.c
index 20fdc9884b7..f6f7042331d 100644
--- a/init/main.c
+++ b/init/main.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/smp_lock.h>
 #include <linux/initrd.h>
-#include <linux/hdreg.h>
 #include <linux/bootmem.h>
 #include <linux/tty.h>
 #include <linux/gfp.h>
@@ -635,10 +634,11 @@ asmlinkage void __init start_kernel(void)
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start && !initrd_below_start_ok &&
-	    page_to_pfn(virt_to_page(initrd_start)) < min_low_pfn) {
+	    page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
 		printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
 		    "disabling it.\n",
-		    page_to_pfn(virt_to_page(initrd_start)), min_low_pfn);
+		    page_to_pfn(virt_to_page((void *)initrd_start)),
+		    min_low_pfn);
 		initrd_start = 0;
 	}
 #endif
@@ -691,7 +691,7 @@ asmlinkage void __init start_kernel(void)
 	rest_init();
 }
 
-static int __initdata initcall_debug;
+static int initcall_debug;
 
 static int __init initcall_debug_setup(char *str)
 {
@@ -700,7 +700,7 @@ static int __init initcall_debug_setup(char *str)
 }
 __setup("initcall_debug", initcall_debug_setup);
 
-static void __init do_one_initcall(initcall_t fn)
+int do_one_initcall(initcall_t fn)
 {
 	int count = preempt_count();
 	ktime_t t0, t1, delta;
@@ -740,6 +740,8 @@ static void __init do_one_initcall(initcall_t fn)
 		print_fn_descriptor_symbol(KERN_WARNING "initcall %s", fn);
 		printk(" returned with %s\n", msgbuf);
 	}
+
+	return result;
 }
 
 
diff --git a/kernel/Kconfig.hz b/kernel/Kconfig.hz
index 382dd5a8b2d..94fabd534b0 100644
--- a/kernel/Kconfig.hz
+++ b/kernel/Kconfig.hz
@@ -55,4 +55,4 @@ config HZ
 	default 1000 if HZ_1000
 
 config SCHED_HRTICK
-	def_bool HIGH_RES_TIMERS && USE_GENERIC_SMP_HELPERS
+	def_bool HIGH_RES_TIMERS && (!SMP || USE_GENERIC_SMP_HELPERS)
diff --git a/kernel/audit.c b/kernel/audit.c
index e092f1c0ce3..4414e93d875 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -707,12 +707,14 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 		if (status_get->mask & AUDIT_STATUS_ENABLED) {
 			err = audit_set_enabled(status_get->enabled,
 						loginuid, sessionid, sid);
-			if (err < 0) return err;
+			if (err < 0)
+				return err;
 		}
 		if (status_get->mask & AUDIT_STATUS_FAILURE) {
 			err = audit_set_failure(status_get->failure,
 						loginuid, sessionid, sid);
-			if (err < 0) return err;
+			if (err < 0)
+				return err;
 		}
 		if (status_get->mask & AUDIT_STATUS_PID) {
 			int new_pid = status_get->pid;
@@ -725,9 +727,12 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 			audit_pid = new_pid;
 			audit_nlk_pid = NETLINK_CB(skb).pid;
 		}
-		if (status_get->mask & AUDIT_STATUS_RATE_LIMIT)
+		if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) {
 			err = audit_set_rate_limit(status_get->rate_limit,
 						   loginuid, sessionid, sid);
+			if (err < 0)
+				return err;
+		}
 		if (status_get->mask & AUDIT_STATUS_BACKLOG_LIMIT)
 			err = audit_set_backlog_limit(status_get->backlog_limit,
 						      loginuid, sessionid, sid);
@@ -1366,7 +1371,7 @@ int audit_string_contains_control(const char *string, size_t len)
 {
 	const unsigned char *p;
 	for (p = string; p < (const unsigned char *)string + len && *p; p++) {
-		if (*p == '"' || *p < 0x21 || *p > 0x7f)
+		if (*p == '"' || *p < 0x21 || *p > 0x7e)
 			return 1;
 	}
 	return 0;
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 98c50cc671b..b7d354e2b0e 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1022,8 +1022,11 @@ static void audit_update_watch(struct audit_parent *parent,
 			struct audit_buffer *ab;
 			ab = audit_log_start(NULL, GFP_KERNEL,
 				AUDIT_CONFIG_CHANGE);
+			audit_log_format(ab, "auid=%u ses=%u",
+				audit_get_loginuid(current),
+				audit_get_sessionid(current));
 			audit_log_format(ab,
-				"op=updated rules specifying path=");
+				" op=updated rules specifying path=");
 			audit_log_untrustedstring(ab, owatch->path);
 			audit_log_format(ab, " with dev=%u ino=%lu\n",
 				 dev, ino);
@@ -1058,7 +1061,10 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
 				struct audit_buffer *ab;
 				ab = audit_log_start(NULL, GFP_KERNEL,
 					AUDIT_CONFIG_CHANGE);
-				audit_log_format(ab, "op=remove rule path=");
+				audit_log_format(ab, "auid=%u ses=%u",
+					audit_get_loginuid(current),
+					audit_get_sessionid(current));
+				audit_log_format(ab, " op=remove rule path=");
 				audit_log_untrustedstring(ab, w->path);
 				if (r->filterkey) {
 					audit_log_format(ab, " key=");
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 4699950e65b..59cedfb040e 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -243,7 +243,11 @@ static inline int open_arg(int flags, int mask)
 
 static int audit_match_perm(struct audit_context *ctx, int mask)
 {
-	unsigned n = ctx->major;
+	unsigned n;
+	if (unlikely(!ctx))
+		return 0;
+
+	n = ctx->major;
 	switch (audit_classify_syscall(ctx->arch, n)) {
 	case 0:	/* native */
 		if ((mask & AUDIT_PERM_WRITE) &&
@@ -284,6 +288,10 @@ static int audit_match_filetype(struct audit_context *ctx, int which)
 {
 	unsigned index = which & ~S_IFMT;
 	mode_t mode = which & S_IFMT;
+
+	if (unlikely(!ctx))
+		return 0;
+
 	if (index >= ctx->name_count)
 		return 0;
 	if (ctx->names[index].ino == -1)
@@ -610,7 +618,7 @@ static int audit_filter_rules(struct task_struct *tsk,
 		if (!result)
 			return 0;
 	}
-	if (rule->filterkey)
+	if (rule->filterkey && ctx)
 		ctx->filterkey = kstrdup(rule->filterkey, GFP_ATOMIC);
 	switch (rule->action) {
 	case AUDIT_NEVER:    *state = AUDIT_DISABLED;	    break;
@@ -2375,7 +2383,7 @@ int __audit_signal_info(int sig, struct task_struct *t)
 	struct audit_context *ctx = tsk->audit_context;
 
 	if (audit_pid && t->tgid == audit_pid) {
-		if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1) {
+		if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1 || sig == SIGUSR2) {
 			audit_sig_pid = tsk->pid;
 			if (tsk->loginuid != -1)
 				audit_sig_uid = tsk->loginuid;
diff --git a/kernel/capability.c b/kernel/capability.c
index 0101e847603..33e51e78c2d 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -486,17 +486,22 @@ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
 	return ret;
 }
 
-int __capable(struct task_struct *t, int cap)
+/**
+ * capable - Determine if the current task has a superior capability in effect
+ * @cap: The capability to be tested for
+ *
+ * Return true if the current task has the given superior capability currently
+ * available for use, false if not.
+ *
+ * This sets PF_SUPERPRIV on the task if the capability is available on the
+ * assumption that it's about to be used.
+ */
+int capable(int cap)
 {
-	if (security_capable(t, cap) == 0) {
-		t->flags |= PF_SUPERPRIV;
+	if (has_capability(current, cap)) {
+		current->flags |= PF_SUPERPRIV;
 		return 1;
 	}
 	return 0;
 }
-
-int capable(int cap)
-{
-	return __capable(current, cap);
-}
 EXPORT_SYMBOL(capable);
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 657f8f8d93a..13932abde15 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -355,6 +355,17 @@ static struct css_set *find_existing_css_set(
 	return NULL;
 }
 
+static void free_cg_links(struct list_head *tmp)
+{
+	struct cg_cgroup_link *link;
+	struct cg_cgroup_link *saved_link;
+
+	list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) {
+		list_del(&link->cgrp_link_list);
+		kfree(link);
+	}
+}
+
 /*
  * allocate_cg_links() allocates "count" cg_cgroup_link structures
  * and chains them on tmp through their cgrp_link_list fields. Returns 0 on
@@ -363,17 +374,12 @@ static struct css_set *find_existing_css_set(
 static int allocate_cg_links(int count, struct list_head *tmp)
 {
 	struct cg_cgroup_link *link;
-	struct cg_cgroup_link *saved_link;
 	int i;
 	INIT_LIST_HEAD(tmp);
 	for (i = 0; i < count; i++) {
 		link = kmalloc(sizeof(*link), GFP_KERNEL);
 		if (!link) {
-			list_for_each_entry_safe(link, saved_link, tmp,
-						 cgrp_link_list) {
-				list_del(&link->cgrp_link_list);
-				kfree(link);
-			}
+			free_cg_links(tmp);
 			return -ENOMEM;
 		}
 		list_add(&link->cgrp_link_list, tmp);
@@ -381,17 +387,6 @@ static int allocate_cg_links(int count, struct list_head *tmp)
 	return 0;
 }
 
-static void free_cg_links(struct list_head *tmp)
-{
-	struct cg_cgroup_link *link;
-	struct cg_cgroup_link *saved_link;
-
-	list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) {
-		list_del(&link->cgrp_link_list);
-		kfree(link);
-	}
-}
-
 /*
  * find_css_set() takes an existing cgroup group and a
  * cgroup object, and returns a css_set object that's
@@ -956,7 +951,6 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 	struct super_block *sb;
 	struct cgroupfs_root *root;
 	struct list_head tmp_cg_links;
-	INIT_LIST_HEAD(&tmp_cg_links);
 
 	/* First find the desired set of subsystems */
 	ret = parse_cgroupfs_options(data, &opts);
@@ -1424,14 +1418,17 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft,
 		if (buffer == NULL)
 			return -ENOMEM;
 	}
-	if (nbytes && copy_from_user(buffer, userbuf, nbytes))
-		return -EFAULT;
+	if (nbytes && copy_from_user(buffer, userbuf, nbytes)) {
+		retval = -EFAULT;
+		goto out;
+	}
 
 	buffer[nbytes] = 0;     /* nul-terminate */
 	strstrip(buffer);
 	retval = cft->write_string(cgrp, cft, buffer);
 	if (!retval)
 		retval = nbytes;
+out:
 	if (buffer != local_buffer)
 		kfree(buffer);
 	return retval;
@@ -2371,7 +2368,7 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	return cgroup_create(c_parent, dentry, mode | S_IFDIR);
 }
 
-static inline int cgroup_has_css_refs(struct cgroup *cgrp)
+static int cgroup_has_css_refs(struct cgroup *cgrp)
 {
 	/* Check the reference count on each subsystem. Since we
 	 * already established that there are no tasks in the
diff --git a/kernel/cpu.c b/kernel/cpu.c
index e202a68d1cc..f17e9854c24 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -349,6 +349,8 @@ static int __cpuinit _cpu_up(unsigned int cpu, int tasks_frozen)
 		goto out_notify;
 	BUG_ON(!cpu_online(cpu));
 
+	cpu_set(cpu, cpu_active_map);
+
 	/* Now call notifier in preparation. */
 	raw_notifier_call_chain(&cpu_chain, CPU_ONLINE | mod, hcpu);
 
@@ -367,7 +369,7 @@ int __cpuinit cpu_up(unsigned int cpu)
 	if (!cpu_isset(cpu, cpu_possible_map)) {
 		printk(KERN_ERR "can't online cpu %d because it is not "
 			"configured as may-hotadd at boot time\n", cpu);
-#if defined(CONFIG_IA64) || defined(CONFIG_X86_64) || defined(CONFIG_S390)
+#if defined(CONFIG_IA64) || defined(CONFIG_X86_64)
 		printk(KERN_ERR "please check additional_cpus= boot "
 				"parameter\n");
 #endif
@@ -383,9 +385,6 @@ int __cpuinit cpu_up(unsigned int cpu)
 
 	err = _cpu_up(cpu, 0);
 
-	if (cpu_online(cpu))
-		cpu_set(cpu, cpu_active_map);
-
 out:
 	cpu_maps_update_done();
 	return err;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 91cf85b36dd..827cd9adccb 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -14,6 +14,8 @@
  *  2003-10-22 Updates by Stephen Hemminger.
  *  2004 May-July Rework by Paul Jackson.
  *  2006 Rework by Paul Menage to use generic cgroups
+ *  2008 Rework of the scheduler domains and CPU hotplug handling
+ *       by Max Krasnyansky
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License.  See the file COPYING in the main directory of the Linux
@@ -54,7 +56,6 @@
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
 #include <linux/mutex.h>
-#include <linux/kfifo.h>
 #include <linux/workqueue.h>
 #include <linux/cgroup.h>
 
@@ -237,9 +238,11 @@ static struct cpuset top_cpuset = {
 
 static DEFINE_MUTEX(callback_mutex);
 
-/* This is ugly, but preserves the userspace API for existing cpuset
+/*
+ * This is ugly, but preserves the userspace API for existing cpuset
  * users. If someone tries to mount the "cpuset" filesystem, we
- * silently switch it to mount "cgroup" instead */
+ * silently switch it to mount "cgroup" instead
+ */
 static int cpuset_get_sb(struct file_system_type *fs_type,
 			 int flags, const char *unused_dev_name,
 			 void *data, struct vfsmount *mnt)
@@ -474,10 +477,9 @@ static int validate_change(const struct cpuset *cur, const struct cpuset *trial)
 }
 
 /*
- * Helper routine for rebuild_sched_domains().
+ * Helper routine for generate_sched_domains().
  * Do cpusets a, b have overlapping cpus_allowed masks?
  */
-
 static int cpusets_overlap(struct cpuset *a, struct cpuset *b)
 {
 	return cpus_intersects(a->cpus_allowed, b->cpus_allowed);
@@ -486,34 +488,48 @@ static int cpusets_overlap(struct cpuset *a, struct cpuset *b)
 static void
 update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
 {
-	if (!dattr)
-		return;
 	if (dattr->relax_domain_level < c->relax_domain_level)
 		dattr->relax_domain_level = c->relax_domain_level;
 	return;
 }
 
+static void
+update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c)
+{
+	LIST_HEAD(q);
+
+	list_add(&c->stack_list, &q);
+	while (!list_empty(&q)) {
+		struct cpuset *cp;
+		struct cgroup *cont;
+		struct cpuset *child;
+
+		cp = list_first_entry(&q, struct cpuset, stack_list);
+		list_del(q.next);
+
+		if (cpus_empty(cp->cpus_allowed))
+			continue;
+
+		if (is_sched_load_balance(cp))
+			update_domain_attr(dattr, cp);
+
+		list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
+			child = cgroup_cs(cont);
+			list_add_tail(&child->stack_list, &q);
+		}
+	}
+}
+
 /*
- * rebuild_sched_domains()
- *
- * This routine will be called to rebuild the scheduler's dynamic
- * sched domains:
- * - if the flag 'sched_load_balance' of any cpuset with non-empty
- *   'cpus' changes,
- * - or if the 'cpus' allowed changes in any cpuset which has that
- *   flag enabled,
- * - or if the 'sched_relax_domain_level' of any cpuset which has
- *   that flag enabled and with non-empty 'cpus' changes,
- * - or if any cpuset with non-empty 'cpus' is removed,
- * - or if a cpu gets offlined.
- *
- * This routine builds a partial partition of the systems CPUs
- * (the set of non-overlappping cpumask_t's in the array 'part'
- * below), and passes that partial partition to the kernel/sched.c
- * partition_sched_domains() routine, which will rebuild the
- * schedulers load balancing domains (sched domains) as specified
- * by that partial partition.  A 'partial partition' is a set of
- * non-overlapping subsets whose union is a subset of that set.
+ * generate_sched_domains()
+ *
+ * This function builds a partial partition of the systems CPUs
+ * A 'partial partition' is a set of non-overlapping subsets whose
+ * union is a subset of that set.
+ * The output of this function needs to be passed to kernel/sched.c
+ * partition_sched_domains() routine, which will rebuild the scheduler's
+ * load balancing domains (sched domains) as specified by that partial
+ * partition.
  *
  * See "What is sched_load_balance" in Documentation/cpusets.txt
  * for a background explanation of this.
@@ -523,16 +539,10 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
  * domains when operating in the severe memory shortage situations
  * that could cause allocation failures below.
  *
- * Call with cgroup_mutex held.  May take callback_mutex during
- * call due to the kfifo_alloc() and kmalloc() calls.  May nest
- * a call to the get_online_cpus()/put_online_cpus() pair.
- * Must not be called holding callback_mutex, because we must not
- * call get_online_cpus() while holding callback_mutex.  Elsewhere
- * the kernel nests callback_mutex inside get_online_cpus() calls.
- * So the reverse nesting would risk an ABBA deadlock.
+ * Must be called with cgroup_lock held.
  *
  * The three key local variables below are:
- *    q  - a kfifo queue of cpuset pointers, used to implement a
+ *    q  - a linked-list queue of cpuset pointers, used to implement a
  *	   top-down scan of all cpusets.  This scan loads a pointer
  *	   to each cpuset marked is_sched_load_balance into the
  *	   array 'csa'.  For our purposes, rebuilding the schedulers
@@ -564,10 +574,10 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
  *	element of the partition (one sched domain) to be passed to
  *	partition_sched_domains().
  */
-
-void rebuild_sched_domains(void)
+static int generate_sched_domains(cpumask_t **domains,
+			struct sched_domain_attr **attributes)
 {
-	struct kfifo *q;	/* queue of cpusets to be scanned */
+	LIST_HEAD(q);		/* queue of cpusets to be scanned */
 	struct cpuset *cp;	/* scans q */
 	struct cpuset **csa;	/* array of all cpuset ptrs */
 	int csn;		/* how many cpuset ptrs in csa so far */
@@ -577,49 +587,58 @@ void rebuild_sched_domains(void)
 	int ndoms;		/* number of sched domains in result */
 	int nslot;		/* next empty doms[] cpumask_t slot */
 
-	q = NULL;
-	csa = NULL;
+	ndoms = 0;
 	doms = NULL;
 	dattr = NULL;
+	csa = NULL;
 
 	/* Special case for the 99% of systems with one, full, sched domain */
 	if (is_sched_load_balance(&top_cpuset)) {
-		ndoms = 1;
 		doms = kmalloc(sizeof(cpumask_t), GFP_KERNEL);
 		if (!doms)
-			goto rebuild;
+			goto done;
+
 		dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL);
 		if (dattr) {
 			*dattr = SD_ATTR_INIT;
-			update_domain_attr(dattr, &top_cpuset);
+			update_domain_attr_tree(dattr, &top_cpuset);
 		}
 		*doms = top_cpuset.cpus_allowed;
-		goto rebuild;
-	}
 
-	q = kfifo_alloc(number_of_cpusets * sizeof(cp), GFP_KERNEL, NULL);
-	if (IS_ERR(q))
+		ndoms = 1;
 		goto done;
+	}
+
 	csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL);
 	if (!csa)
 		goto done;
 	csn = 0;
 
-	cp = &top_cpuset;
-	__kfifo_put(q, (void *)&cp, sizeof(cp));
-	while (__kfifo_get(q, (void *)&cp, sizeof(cp))) {
+	list_add(&top_cpuset.stack_list, &q);
+	while (!list_empty(&q)) {
 		struct cgroup *cont;
 		struct cpuset *child;   /* scans child cpusets of cp */
 
+		cp = list_first_entry(&q, struct cpuset, stack_list);
+		list_del(q.next);
+
 		if (cpus_empty(cp->cpus_allowed))
 			continue;
 
-		if (is_sched_load_balance(cp))
+		/*
+		 * All child cpusets contain a subset of the parent's cpus, so
+		 * just skip them, and then we call update_domain_attr_tree()
+		 * to calc relax_domain_level of the corresponding sched
+		 * domain.
+		 */
+		if (is_sched_load_balance(cp)) {
 			csa[csn++] = cp;
+			continue;
+		}
 
 		list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
 			child = cgroup_cs(cont);
-			__kfifo_put(q, (void *)&child, sizeof(cp));
+			list_add_tail(&child->stack_list, &q);
 		}
   	}
 
@@ -650,63 +669,141 @@ restart:
 		}
 	}
 
-	/* Convert <csn, csa> to <ndoms, doms> */
+	/*
+	 * Now we know how many domains to create.
+	 * Convert <csn, csa> to <ndoms, doms> and populate cpu masks.
+	 */
 	doms = kmalloc(ndoms * sizeof(cpumask_t), GFP_KERNEL);
-	if (!doms)
-		goto rebuild;
+	if (!doms) {
+		ndoms = 0;
+		goto done;
+	}
+
+	/*
+	 * The rest of the code, including the scheduler, can deal with
+	 * dattr==NULL case. No need to abort if alloc fails.
+	 */
 	dattr = kmalloc(ndoms * sizeof(struct sched_domain_attr), GFP_KERNEL);
 
 	for (nslot = 0, i = 0; i < csn; i++) {
 		struct cpuset *a = csa[i];
+		cpumask_t *dp;
 		int apn = a->pn;
 
-		if (apn >= 0) {
-			cpumask_t *dp = doms + nslot;
-
-			if (nslot == ndoms) {
-				static int warnings = 10;
-				if (warnings) {
-					printk(KERN_WARNING
-					 "rebuild_sched_domains confused:"
-					  " nslot %d, ndoms %d, csn %d, i %d,"
-					  " apn %d\n",
-					  nslot, ndoms, csn, i, apn);
-					warnings--;
-				}
-				continue;
+		if (apn < 0) {
+			/* Skip completed partitions */
+			continue;
+		}
+
+		dp = doms + nslot;
+
+		if (nslot == ndoms) {
+			static int warnings = 10;
+			if (warnings) {
+				printk(KERN_WARNING
+				 "rebuild_sched_domains confused:"
+				  " nslot %d, ndoms %d, csn %d, i %d,"
+				  " apn %d\n",
+				  nslot, ndoms, csn, i, apn);
+				warnings--;
 			}
+			continue;
+		}
 
-			cpus_clear(*dp);
-			if (dattr)
-				*(dattr + nslot) = SD_ATTR_INIT;
-			for (j = i; j < csn; j++) {
-				struct cpuset *b = csa[j];
-
-				if (apn == b->pn) {
-					cpus_or(*dp, *dp, b->cpus_allowed);
-					b->pn = -1;
-					if (dattr)
-						update_domain_attr(dattr
-								   + nslot, b);
-				}
+		cpus_clear(*dp);
+		if (dattr)
+			*(dattr + nslot) = SD_ATTR_INIT;
+		for (j = i; j < csn; j++) {
+			struct cpuset *b = csa[j];
+
+			if (apn == b->pn) {
+				cpus_or(*dp, *dp, b->cpus_allowed);
+				if (dattr)
+					update_domain_attr_tree(dattr + nslot, b);
+
+				/* Done with this partition */
+				b->pn = -1;
 			}
-			nslot++;
 		}
+		nslot++;
 	}
 	BUG_ON(nslot != ndoms);
 
-rebuild:
-	/* Have scheduler rebuild sched domains */
+done:
+	kfree(csa);
+
+	*domains    = doms;
+	*attributes = dattr;
+	return ndoms;
+}
+
+/*
+ * Rebuild scheduler domains.
+ *
+ * Call with neither cgroup_mutex held nor within get_online_cpus().
+ * Takes both cgroup_mutex and get_online_cpus().
+ *
+ * Cannot be directly called from cpuset code handling changes
+ * to the cpuset pseudo-filesystem, because it cannot be called
+ * from code that already holds cgroup_mutex.
+ */
+static void do_rebuild_sched_domains(struct work_struct *unused)
+{
+	struct sched_domain_attr *attr;
+	cpumask_t *doms;
+	int ndoms;
+
 	get_online_cpus();
-	partition_sched_domains(ndoms, doms, dattr);
+
+	/* Generate domain masks and attrs */
+	cgroup_lock();
+	ndoms = generate_sched_domains(&doms, &attr);
+	cgroup_unlock();
+
+	/* Have scheduler rebuild the domains */
+	partition_sched_domains(ndoms, doms, attr);
+
 	put_online_cpus();
+}
 
-done:
-	if (q && !IS_ERR(q))
-		kfifo_free(q);
-	kfree(csa);
-	/* Don't kfree(doms) -- partition_sched_domains() does that. */
-	/* Don't kfree(dattr) -- partition_sched_domains() does that. */
+static DECLARE_WORK(rebuild_sched_domains_work, do_rebuild_sched_domains);
+
+/*
+ * Rebuild scheduler domains, asynchronously via workqueue.
+ *
+ * If the flag 'sched_load_balance' of any cpuset with non-empty
+ * 'cpus' changes, or if the 'cpus' allowed changes in any cpuset
+ * which has that flag enabled, or if any cpuset with a non-empty
+ * 'cpus' is removed, then call this routine to rebuild the
+ * scheduler's dynamic sched domains.
+ *
+ * The rebuild_sched_domains() and partition_sched_domains()
+ * routines must nest cgroup_lock() inside get_online_cpus(),
+ * but such cpuset changes as these must nest that locking the
+ * other way, holding cgroup_lock() for much of the code.
+ *
+ * So in order to avoid an ABBA deadlock, the cpuset code handling
+ * these user changes delegates the actual sched domain rebuilding
+ * to a separate workqueue thread, which ends up processing the
+ * above do_rebuild_sched_domains() function.
+ */
+static void async_rebuild_sched_domains(void)
+{
+	schedule_work(&rebuild_sched_domains_work);
+}
+
+/*
+ * Accomplishes the same scheduler domain rebuild as the above
+ * async_rebuild_sched_domains(), however it directly calls the
+ * rebuild routine synchronously rather than calling it via an
+ * asynchronous work thread.
+ *
+ * This can only be called from code that is not holding
+ * cgroup_mutex (not nested in a cgroup_lock() call.)
+ */
+void rebuild_sched_domains(void)
+{
+	do_rebuild_sched_domains(NULL);
 }
 
 /**
@@ -746,37 +843,25 @@ static void cpuset_change_cpumask(struct task_struct *tsk,
 /**
  * update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
  * @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
+ * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
  *
  * Called with cgroup_mutex held
  *
  * The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
  * calling callback functions for each.
  *
- * Return 0 if successful, -errno if not.
+ * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
+ * if @heap != NULL.
  */
-static int update_tasks_cpumask(struct cpuset *cs)
+static void update_tasks_cpumask(struct cpuset *cs, struct ptr_heap *heap)
 {
 	struct cgroup_scanner scan;
-	struct ptr_heap heap;
-	int retval;
-
-	/*
-	 * cgroup_scan_tasks() will initialize heap->gt for us.
-	 * heap_init() is still needed here for we should not change
-	 * cs->cpus_allowed when heap_init() fails.
-	 */
-	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
-	if (retval)
-		return retval;
 
 	scan.cg = cs->css.cgroup;
 	scan.test_task = cpuset_test_cpumask;
 	scan.process_task = cpuset_change_cpumask;
-	scan.heap = &heap;
-	retval = cgroup_scan_tasks(&scan);
-
-	heap_free(&heap);
-	return retval;
+	scan.heap = heap;
+	cgroup_scan_tasks(&scan);
 }
 
 /**
@@ -786,6 +871,7 @@ static int update_tasks_cpumask(struct cpuset *cs)
  */
 static int update_cpumask(struct cpuset *cs, const char *buf)
 {
+	struct ptr_heap heap;
 	struct cpuset trialcs;
 	int retval;
 	int is_load_balanced;
@@ -820,6 +906,10 @@ static int update_cpumask(struct cpuset *cs, const char *buf)
 	if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed))
 		return 0;
 
+	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+	if (retval)
+		return retval;
+
 	is_load_balanced = is_sched_load_balance(&trialcs);
 
 	mutex_lock(&callback_mutex);
@@ -830,12 +920,12 @@ static int update_cpumask(struct cpuset *cs, const char *buf)
 	 * Scan tasks in the cpuset, and update the cpumasks of any
 	 * that need an update.
 	 */
-	retval = update_tasks_cpumask(cs);
-	if (retval < 0)
-		return retval;
+	update_tasks_cpumask(cs, &heap);
+
+	heap_free(&heap);
 
 	if (is_load_balanced)
-		rebuild_sched_domains();
+		async_rebuild_sched_domains();
 	return 0;
 }
 
@@ -1062,7 +1152,7 @@ static int update_relax_domain_level(struct cpuset *cs, s64 val)
 	if (val != cs->relax_domain_level) {
 		cs->relax_domain_level = val;
 		if (!cpus_empty(cs->cpus_allowed) && is_sched_load_balance(cs))
-			rebuild_sched_domains();
+			async_rebuild_sched_domains();
 	}
 
 	return 0;
@@ -1103,7 +1193,7 @@ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs,
 	mutex_unlock(&callback_mutex);
 
 	if (cpus_nonempty && balance_flag_changed)
-		rebuild_sched_domains();
+		async_rebuild_sched_domains();
 
 	return 0;
 }
@@ -1464,6 +1554,9 @@ static u64 cpuset_read_u64(struct cgroup *cont, struct cftype *cft)
 	default:
 		BUG();
 	}
+
+	/* Unreachable but makes gcc happy */
+	return 0;
 }
 
 static s64 cpuset_read_s64(struct cgroup *cont, struct cftype *cft)
@@ -1476,6 +1569,9 @@ static s64 cpuset_read_s64(struct cgroup *cont, struct cftype *cft)
 	default:
 		BUG();
 	}
+
+	/* Unrechable but makes gcc happy */
+	return 0;
 }
 
 
@@ -1664,15 +1760,9 @@ static struct cgroup_subsys_state *cpuset_create(
 }
 
 /*
- * Locking note on the strange update_flag() call below:
- *
  * If the cpuset being removed has its flag 'sched_load_balance'
  * enabled, then simulate turning sched_load_balance off, which
- * will call rebuild_sched_domains().  The get_online_cpus()
- * call in rebuild_sched_domains() must not be made while holding
- * callback_mutex.  Elsewhere the kernel nests callback_mutex inside
- * get_online_cpus() calls.  So the reverse nesting would risk an
- * ABBA deadlock.
+ * will call async_rebuild_sched_domains().
  */
 
 static void cpuset_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
@@ -1691,7 +1781,7 @@ static void cpuset_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
 struct cgroup_subsys cpuset_subsys = {
 	.name = "cpuset",
 	.create = cpuset_create,
-	.destroy  = cpuset_destroy,
+	.destroy = cpuset_destroy,
 	.can_attach = cpuset_can_attach,
 	.attach = cpuset_attach,
 	.populate = cpuset_populate,
@@ -1783,7 +1873,7 @@ static void move_member_tasks_to_cpuset(struct cpuset *from, struct cpuset *to)
 }
 
 /*
- * If common_cpu_mem_hotplug_unplug(), below, unplugs any CPUs
+ * If CPU and/or memory hotplug handlers, below, unplug any CPUs
  * or memory nodes, we need to walk over the cpuset hierarchy,
  * removing that CPU or node from all cpusets.  If this removes the
  * last CPU or node from a cpuset, then move the tasks in the empty
@@ -1833,24 +1923,21 @@ static void remove_tasks_in_empty_cpuset(struct cpuset *cs)
  */
 static void scan_for_empty_cpusets(const struct cpuset *root)
 {
+	LIST_HEAD(queue);
 	struct cpuset *cp;	/* scans cpusets being updated */
 	struct cpuset *child;	/* scans child cpusets of cp */
-	struct list_head queue;
 	struct cgroup *cont;
 	nodemask_t oldmems;
 
-	INIT_LIST_HEAD(&queue);
-
 	list_add_tail((struct list_head *)&root->stack_list, &queue);
 
 	while (!list_empty(&queue)) {
-		cp = container_of(queue.next, struct cpuset, stack_list);
+		cp = list_first_entry(&queue, struct cpuset, stack_list);
 		list_del(queue.next);
 		list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
 			child = cgroup_cs(cont);
 			list_add_tail(&child->stack_list, &queue);
 		}
-		cont = cp->css.cgroup;
 
 		/* Continue past cpusets with all cpus, mems online */
 		if (cpus_subset(cp->cpus_allowed, cpu_online_map) &&
@@ -1871,42 +1958,13 @@ static void scan_for_empty_cpusets(const struct cpuset *root)
 		     nodes_empty(cp->mems_allowed))
 			remove_tasks_in_empty_cpuset(cp);
 		else {
-			update_tasks_cpumask(cp);
+			update_tasks_cpumask(cp, NULL);
 			update_tasks_nodemask(cp, &oldmems);
 		}
 	}
 }
 
 /*
- * The cpus_allowed and mems_allowed nodemasks in the top_cpuset track
- * cpu_online_map and node_states[N_HIGH_MEMORY].  Force the top cpuset to
- * track what's online after any CPU or memory node hotplug or unplug event.
- *
- * Since there are two callers of this routine, one for CPU hotplug
- * events and one for memory node hotplug events, we could have coded
- * two separate routines here.  We code it as a single common routine
- * in order to minimize text size.
- */
-
-static void common_cpu_mem_hotplug_unplug(int rebuild_sd)
-{
-	cgroup_lock();
-
-	top_cpuset.cpus_allowed = cpu_online_map;
-	top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
-	scan_for_empty_cpusets(&top_cpuset);
-
-	/*
-	 * Scheduler destroys domains on hotplug events.
-	 * Rebuild them based on the current settings.
-	 */
-	if (rebuild_sd)
-		rebuild_sched_domains();
-
-	cgroup_unlock();
-}
-
-/*
  * The top_cpuset tracks what CPUs and Memory Nodes are online,
  * period.  This is necessary in order to make cpusets transparent
  * (of no affect) on systems that are actively using CPU hotplug
@@ -1914,40 +1972,52 @@ static void common_cpu_mem_hotplug_unplug(int rebuild_sd)
  *
  * This routine ensures that top_cpuset.cpus_allowed tracks
  * cpu_online_map on each CPU hotplug (cpuhp) event.
+ *
+ * Called within get_online_cpus().  Needs to call cgroup_lock()
+ * before calling generate_sched_domains().
  */
-
-static int cpuset_handle_cpuhp(struct notifier_block *unused_nb,
+static int cpuset_track_online_cpus(struct notifier_block *unused_nb,
 				unsigned long phase, void *unused_cpu)
 {
+	struct sched_domain_attr *attr;
+	cpumask_t *doms;
+	int ndoms;
+
 	switch (phase) {
-	case CPU_UP_CANCELED:
-	case CPU_UP_CANCELED_FROZEN:
-	case CPU_DOWN_FAILED:
-	case CPU_DOWN_FAILED_FROZEN:
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		common_cpu_mem_hotplug_unplug(1);
 		break;
+
 	default:
 		return NOTIFY_DONE;
 	}
 
+	cgroup_lock();
+	top_cpuset.cpus_allowed = cpu_online_map;
+	scan_for_empty_cpusets(&top_cpuset);
+	ndoms = generate_sched_domains(&doms, &attr);
+	cgroup_unlock();
+
+	/* Have scheduler rebuild the domains */
+	partition_sched_domains(ndoms, doms, attr);
+
 	return NOTIFY_OK;
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 /*
  * Keep top_cpuset.mems_allowed tracking node_states[N_HIGH_MEMORY].
- * Call this routine anytime after you change
- * node_states[N_HIGH_MEMORY].
- * See also the previous routine cpuset_handle_cpuhp().
+ * Call this routine anytime after node_states[N_HIGH_MEMORY] changes.
+ * See also the previous routine cpuset_track_online_cpus().
  */
-
 void cpuset_track_online_nodes(void)
 {
-	common_cpu_mem_hotplug_unplug(0);
+	cgroup_lock();
+	top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
+	scan_for_empty_cpusets(&top_cpuset);
+	cgroup_unlock();
 }
 #endif
 
@@ -1962,7 +2032,7 @@ void __init cpuset_init_smp(void)
 	top_cpuset.cpus_allowed = cpu_online_map;
 	top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
 
-	hotcpu_notifier(cpuset_handle_cpuhp, 0);
+	hotcpu_notifier(cpuset_track_online_cpus, 0);
 }
 
 /**
diff --git a/kernel/dma-coherent.c b/kernel/dma-coherent.c
index 7517115a8cc..c1d4d5b4c61 100644
--- a/kernel/dma-coherent.c
+++ b/kernel/dma-coherent.c
@@ -77,15 +77,14 @@ void *dma_mark_declared_memory_occupied(struct device *dev,
 {
 	struct dma_coherent_mem *mem = dev->dma_mem;
 	int pos, err;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1);
 
-	pages >>= PAGE_SHIFT;
+	size += device_addr & ~PAGE_MASK;
 
 	if (!mem)
 		return ERR_PTR(-EINVAL);
 
 	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
+	err = bitmap_allocate_region(mem->bitmap, pos, get_order(size));
 	if (err != 0)
 		return ERR_PTR(err);
 	return mem->virt_base + (pos << PAGE_SHIFT);
@@ -93,7 +92,7 @@ void *dma_mark_declared_memory_occupied(struct device *dev,
 EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
 
 /**
- * Try to allocate memory from the per-device coherent area.
+ * dma_alloc_from_coherent() - try to allocate memory from the per-device coherent area
  *
  * @dev:	device from which we allocate memory
  * @size:	size of requested memory area
@@ -101,11 +100,11 @@ EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
  * @ret:	This pointer will be filled with the virtual address
  * 		to allocated area.
  *
- * This function should be only called from per-arch %dma_alloc_coherent()
+ * This function should be only called from per-arch dma_alloc_coherent()
  * to support allocation from per-device coherent memory pools.
  *
  * Returns 0 if dma_alloc_coherent should continue with allocating from
- * generic memory areas, or !0 if dma_alloc_coherent should return %ret.
+ * generic memory areas, or !0 if dma_alloc_coherent should return @ret.
  */
 int dma_alloc_from_coherent(struct device *dev, ssize_t size,
 				       dma_addr_t *dma_handle, void **ret)
@@ -127,7 +126,7 @@ int dma_alloc_from_coherent(struct device *dev, ssize_t size,
 }
 
 /**
- * Try to free the memory allocated from per-device coherent memory pool.
+ * dma_release_from_coherent() - try to free the memory allocated from per-device coherent memory pool
  * @dev:	device from which the memory was allocated
  * @order:	the order of pages allocated
  * @vaddr:	virtual address of allocated pages
@@ -136,7 +135,7 @@ int dma_alloc_from_coherent(struct device *dev, ssize_t size,
  * coherent memory pool and if so, releases that memory.
  *
  * Returns 1 if we correctly released the memory, or 0 if
- * %dma_release_coherent() should proceed with releasing memory from
+ * dma_release_coherent() should proceed with releasing memory from
  * generic pools.
  */
 int dma_release_from_coherent(struct device *dev, int order, void *vaddr)
diff --git a/kernel/exit.c b/kernel/exit.c
index eb4d6470d1d..16395644a98 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -112,9 +112,9 @@ static void __exit_signal(struct task_struct *tsk)
 		 * We won't ever get here for the group leader, since it
 		 * will have been the last reference on the signal_struct.
 		 */
-		sig->utime = cputime_add(sig->utime, tsk->utime);
-		sig->stime = cputime_add(sig->stime, tsk->stime);
-		sig->gtime = cputime_add(sig->gtime, tsk->gtime);
+		sig->utime = cputime_add(sig->utime, task_utime(tsk));
+		sig->stime = cputime_add(sig->stime, task_stime(tsk));
+		sig->gtime = cputime_add(sig->gtime, task_gtime(tsk));
 		sig->min_flt += tsk->min_flt;
 		sig->maj_flt += tsk->maj_flt;
 		sig->nvcsw += tsk->nvcsw;
@@ -831,26 +831,50 @@ static void reparent_thread(struct task_struct *p, struct task_struct *father)
  * the child reaper process (ie "init") in our pid
  * space.
  */
+static struct task_struct *find_new_reaper(struct task_struct *father)
+{
+	struct pid_namespace *pid_ns = task_active_pid_ns(father);
+	struct task_struct *thread;
+
+	thread = father;
+	while_each_thread(father, thread) {
+		if (thread->flags & PF_EXITING)
+			continue;
+		if (unlikely(pid_ns->child_reaper == father))
+			pid_ns->child_reaper = thread;
+		return thread;
+	}
+
+	if (unlikely(pid_ns->child_reaper == father)) {
+		write_unlock_irq(&tasklist_lock);
+		if (unlikely(pid_ns == &init_pid_ns))
+			panic("Attempted to kill init!");
+
+		zap_pid_ns_processes(pid_ns);
+		write_lock_irq(&tasklist_lock);
+		/*
+		 * We can not clear ->child_reaper or leave it alone.
+		 * There may by stealth EXIT_DEAD tasks on ->children,
+		 * forget_original_parent() must move them somewhere.
+		 */
+		pid_ns->child_reaper = init_pid_ns.child_reaper;
+	}
+
+	return pid_ns->child_reaper;
+}
+
 static void forget_original_parent(struct task_struct *father)
 {
-	struct task_struct *p, *n, *reaper = father;
+	struct task_struct *p, *n, *reaper;
 	LIST_HEAD(ptrace_dead);
 
 	write_lock_irq(&tasklist_lock);
-
+	reaper = find_new_reaper(father);
 	/*
 	 * First clean up ptrace if we were using it.
 	 */
 	ptrace_exit(father, &ptrace_dead);
 
-	do {
-		reaper = next_thread(reaper);
-		if (reaper == father) {
-			reaper = task_child_reaper(father);
-			break;
-		}
-	} while (reaper->flags & PF_EXITING);
-
 	list_for_each_entry_safe(p, n, &father->children, sibling) {
 		p->real_parent = reaper;
 		if (p->parent == father) {
@@ -911,15 +935,15 @@ static void exit_notify(struct task_struct *tsk, int group_dead)
 		tsk->exit_signal = SIGCHLD;
 
 	signal = tracehook_notify_death(tsk, &cookie, group_dead);
-	if (signal > 0)
+	if (signal >= 0)
 		signal = do_notify_parent(tsk, signal);
 
-	tsk->exit_state = signal < 0 ? EXIT_DEAD : EXIT_ZOMBIE;
+	tsk->exit_state = signal == DEATH_REAP ? EXIT_DEAD : EXIT_ZOMBIE;
 
 	/* mt-exec, de_thread() is waiting for us */
 	if (thread_group_leader(tsk) &&
-	    tsk->signal->notify_count < 0 &&
-	    tsk->signal->group_exit_task)
+	    tsk->signal->group_exit_task &&
+	    tsk->signal->notify_count < 0)
 		wake_up_process(tsk->signal->group_exit_task);
 
 	write_unlock_irq(&tasklist_lock);
@@ -927,7 +951,7 @@ static void exit_notify(struct task_struct *tsk, int group_dead)
 	tracehook_report_death(tsk, signal, cookie, group_dead);
 
 	/* If the process is dead, release it - nobody will wait for it */
-	if (signal < 0)
+	if (signal == DEATH_REAP)
 		release_task(tsk);
 }
 
@@ -959,39 +983,6 @@ static void check_stack_usage(void)
 static inline void check_stack_usage(void) {}
 #endif
 
-static inline void exit_child_reaper(struct task_struct *tsk)
-{
-	if (likely(tsk->group_leader != task_child_reaper(tsk)))
-		return;
-
-	if (tsk->nsproxy->pid_ns == &init_pid_ns)
-		panic("Attempted to kill init!");
-
-	/*
-	 * @tsk is the last thread in the 'cgroup-init' and is exiting.
-	 * Terminate all remaining processes in the namespace and reap them
-	 * before exiting @tsk.
-	 *
-	 * Note that @tsk (last thread of cgroup-init) may not necessarily
-	 * be the child-reaper (i.e main thread of cgroup-init) of the
-	 * namespace i.e the child_reaper may have already exited.
-	 *
-	 * Even after a child_reaper exits, we let it inherit orphaned children,
-	 * because, pid_ns->child_reaper remains valid as long as there is
-	 * at least one living sub-thread in the cgroup init.
-
-	 * This living sub-thread of the cgroup-init will be notified when
-	 * a child inherited by the 'child-reaper' exits (do_notify_parent()
-	 * uses __group_send_sig_info()). Further, when reaping child processes,
-	 * do_wait() iterates over children of all living sub threads.
-
-	 * i.e even though 'child_reaper' thread is listed as the parent of the
-	 * orphaned children, any living sub-thread in the cgroup-init can
-	 * perform the role of the child_reaper.
-	 */
-	zap_pid_ns_processes(tsk->nsproxy->pid_ns);
-}
-
 NORET_TYPE void do_exit(long code)
 {
 	struct task_struct *tsk = current;
@@ -1051,7 +1042,6 @@ NORET_TYPE void do_exit(long code)
 	}
 	group_dead = atomic_dec_and_test(&tsk->signal->live);
 	if (group_dead) {
-		exit_child_reaper(tsk);
 		hrtimer_cancel(&tsk->signal->real_timer);
 		exit_itimers(tsk->signal);
 	}
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 152abfd3589..0314074fa23 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -323,7 +323,8 @@ static int __irq_set_trigger(struct irq_chip *chip, unsigned int irq,
 	ret = chip->set_type(irq, flags & IRQF_TRIGGER_MASK);
 
 	if (ret)
-		pr_err("setting flow type for irq %u failed (%pF)\n",
+		pr_err("setting trigger mode %d for irq %u failed (%pF)\n",
+				(int)(flags & IRQF_TRIGGER_MASK),
 				irq, chip->set_type);
 
 	return ret;
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index 6c6d35d68ee..a09dd29c2fd 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -8,6 +8,7 @@
 
 #include <linux/irq.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/interrupt.h>
 
 #include "internals.h"
@@ -16,23 +17,18 @@ static struct proc_dir_entry *root_irq_dir;
 
 #ifdef CONFIG_SMP
 
-static int irq_affinity_read_proc(char *page, char **start, off_t off,
-				  int count, int *eof, void *data)
+static int irq_affinity_proc_show(struct seq_file *m, void *v)
 {
-	struct irq_desc *desc = irq_desc + (long)data;
+	struct irq_desc *desc = irq_desc + (long)m->private;
 	cpumask_t *mask = &desc->affinity;
-	int len;
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
 	if (desc->status & IRQ_MOVE_PENDING)
 		mask = &desc->pending_mask;
 #endif
-	len = cpumask_scnprintf(page, count, *mask);
-
-	if (count - len < 2)
-		return -EINVAL;
-	len += sprintf(page + len, "\n");
-	return len;
+	seq_cpumask(m, mask);
+	seq_putc(m, '\n');
+	return 0;
 }
 
 #ifndef is_affinity_mask_valid
@@ -40,11 +36,12 @@ static int irq_affinity_read_proc(char *page, char **start, off_t off,
 #endif
 
 int no_irq_affinity;
-static int irq_affinity_write_proc(struct file *file, const char __user *buffer,
-				   unsigned long count, void *data)
+static ssize_t irq_affinity_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *pos)
 {
-	unsigned int irq = (int)(long)data, full_count = count, err;
+	unsigned int irq = (int)(long)PDE(file->f_path.dentry->d_inode)->data;
 	cpumask_t new_value;
+	int err;
 
 	if (!irq_desc[irq].chip->set_affinity || no_irq_affinity ||
 	    irq_balancing_disabled(irq))
@@ -65,28 +62,38 @@ static int irq_affinity_write_proc(struct file *file, const char __user *buffer,
 	if (!cpus_intersects(new_value, cpu_online_map))
 		/* Special case for empty set - allow the architecture
 		   code to set default SMP affinity. */
-		return irq_select_affinity(irq) ? -EINVAL : full_count;
+		return irq_select_affinity(irq) ? -EINVAL : count;
 
 	irq_set_affinity(irq, new_value);
 
-	return full_count;
+	return count;
 }
 
-static int default_affinity_read(char *page, char **start, off_t off,
-				  int count, int *eof, void *data)
+static int irq_affinity_proc_open(struct inode *inode, struct file *file)
 {
-	int len = cpumask_scnprintf(page, count, irq_default_affinity);
-	if (count - len < 2)
-		return -EINVAL;
-	len += sprintf(page + len, "\n");
-	return len;
+	return single_open(file, irq_affinity_proc_show, PDE(inode)->data);
 }
 
-static int default_affinity_write(struct file *file, const char __user *buffer,
-				   unsigned long count, void *data)
+static const struct file_operations irq_affinity_proc_fops = {
+	.open		= irq_affinity_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= irq_affinity_proc_write,
+};
+
+static int default_affinity_show(struct seq_file *m, void *v)
+{
+	seq_cpumask(m, &irq_default_affinity);
+	seq_putc(m, '\n');
+	return 0;
+}
+
+static ssize_t default_affinity_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
-	unsigned int full_count = count, err;
 	cpumask_t new_value;
+	int err;
 
 	err = cpumask_parse_user(buffer, count, new_value);
 	if (err)
@@ -105,8 +112,21 @@ static int default_affinity_write(struct file *file, const char __user *buffer,
 
 	irq_default_affinity = new_value;
 
-	return full_count;
+	return count;
 }
+
+static int default_affinity_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, default_affinity_show, NULL);
+}
+
+static const struct file_operations default_affinity_proc_fops = {
+	.open		= default_affinity_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= default_affinity_write,
+};
 #endif
 
 static int irq_spurious_read(char *page, char **start, off_t off,
@@ -178,16 +198,9 @@ void register_irq_proc(unsigned int irq)
 	irq_desc[irq].dir = proc_mkdir(name, root_irq_dir);
 
 #ifdef CONFIG_SMP
-	{
-		/* create /proc/irq/<irq>/smp_affinity */
-		entry = create_proc_entry("smp_affinity", 0600, irq_desc[irq].dir);
-
-		if (entry) {
-			entry->data = (void *)(long)irq;
-			entry->read_proc = irq_affinity_read_proc;
-			entry->write_proc = irq_affinity_write_proc;
-		}
-	}
+	/* create /proc/irq/<irq>/smp_affinity */
+	proc_create_data("smp_affinity", 0600, irq_desc[irq].dir,
+			 &irq_affinity_proc_fops, (void *)(long)irq);
 #endif
 
 	entry = create_proc_entry("spurious", 0444, irq_desc[irq].dir);
@@ -208,15 +221,8 @@ void unregister_handler_proc(unsigned int irq, struct irqaction *action)
 void register_default_affinity_proc(void)
 {
 #ifdef CONFIG_SMP
-	struct proc_dir_entry *entry;
-
-	/* create /proc/irq/default_smp_affinity */
-	entry = create_proc_entry("default_smp_affinity", 0600, root_irq_dir);
-	if (entry) {
-		entry->data = NULL;
-		entry->read_proc  = default_affinity_read;
-		entry->write_proc = default_affinity_write;
-	}
+	proc_create("irq/default_smp_affinity", 0600, NULL,
+		    &default_affinity_proc_fops);
 #endif
 }
 
diff --git a/kernel/kexec.c b/kernel/kexec.c
index c8a4370e2a3..59f3f0df35d 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -12,7 +12,7 @@
 #include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/kexec.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/highmem.h>
 #include <linux/syscalls.h>
@@ -77,7 +77,7 @@ int kexec_should_crash(struct task_struct *p)
  *
  * The code for the transition from the current kernel to the
  * the new kernel is placed in the control_code_buffer, whose size
- * is given by KEXEC_CONTROL_CODE_SIZE.  In the best case only a single
+ * is given by KEXEC_CONTROL_PAGE_SIZE.  In the best case only a single
  * page of memory is necessary, but some architectures require more.
  * Because this memory must be identity mapped in the transition from
  * virtual to physical addresses it must live in the range
@@ -242,7 +242,7 @@ static int kimage_normal_alloc(struct kimage **rimage, unsigned long entry,
 	 */
 	result = -ENOMEM;
 	image->control_code_page = kimage_alloc_control_pages(image,
-					   get_order(KEXEC_CONTROL_CODE_SIZE));
+					   get_order(KEXEC_CONTROL_PAGE_SIZE));
 	if (!image->control_code_page) {
 		printk(KERN_ERR "Could not allocate control_code_buffer\n");
 		goto out;
@@ -317,7 +317,7 @@ static int kimage_crash_alloc(struct kimage **rimage, unsigned long entry,
 	 */
 	result = -ENOMEM;
 	image->control_code_page = kimage_alloc_control_pages(image,
-					   get_order(KEXEC_CONTROL_CODE_SIZE));
+					   get_order(KEXEC_CONTROL_PAGE_SIZE));
 	if (!image->control_code_page) {
 		printk(KERN_ERR "Could not allocate control_code_buffer\n");
 		goto out;
@@ -924,19 +924,14 @@ static int kimage_load_segment(struct kimage *image,
  */
 struct kimage *kexec_image;
 struct kimage *kexec_crash_image;
-/*
- * A home grown binary mutex.
- * Nothing can wait so this mutex is safe to use
- * in interrupt context :)
- */
-static int kexec_lock;
+
+static DEFINE_MUTEX(kexec_mutex);
 
 asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
 				struct kexec_segment __user *segments,
 				unsigned long flags)
 {
 	struct kimage **dest_image, *image;
-	int locked;
 	int result;
 
 	/* We only trust the superuser with rebooting the system. */
@@ -972,8 +967,7 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
 	 *
 	 * KISS: always take the mutex.
 	 */
-	locked = xchg(&kexec_lock, 1);
-	if (locked)
+	if (!mutex_trylock(&kexec_mutex))
 		return -EBUSY;
 
 	dest_image = &kexec_image;
@@ -1015,8 +1009,7 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
 	image = xchg(dest_image, image);
 
 out:
-	locked = xchg(&kexec_lock, 0); /* Release the mutex */
-	BUG_ON(!locked);
+	mutex_unlock(&kexec_mutex);
 	kimage_free(image);
 
 	return result;
@@ -1063,10 +1056,7 @@ asmlinkage long compat_sys_kexec_load(unsigned long entry,
 
 void crash_kexec(struct pt_regs *regs)
 {
-	int locked;
-
-
-	/* Take the kexec_lock here to prevent sys_kexec_load
+	/* Take the kexec_mutex here to prevent sys_kexec_load
 	 * running on one cpu from replacing the crash kernel
 	 * we are using after a panic on a different cpu.
 	 *
@@ -1074,8 +1064,7 @@ void crash_kexec(struct pt_regs *regs)
 	 * of memory the xchg(&kexec_crash_image) would be
 	 * sufficient.  But since I reuse the memory...
 	 */
-	locked = xchg(&kexec_lock, 1);
-	if (!locked) {
+	if (mutex_trylock(&kexec_mutex)) {
 		if (kexec_crash_image) {
 			struct pt_regs fixed_regs;
 			crash_setup_regs(&fixed_regs, regs);
@@ -1083,8 +1072,7 @@ void crash_kexec(struct pt_regs *regs)
 			machine_crash_shutdown(&fixed_regs);
 			machine_kexec(kexec_crash_image);
 		}
-		locked = xchg(&kexec_lock, 0);
-		BUG_ON(!locked);
+		mutex_unlock(&kexec_mutex);
 	}
 }
 
@@ -1426,25 +1414,23 @@ static int __init crash_save_vmcoreinfo_init(void)
 
 module_init(crash_save_vmcoreinfo_init)
 
-/**
- *	kernel_kexec - reboot the system
- *
- *	Move into place and start executing a preloaded standalone
- *	executable.  If nothing was preloaded return an error.
+/*
+ * Move into place and start executing a preloaded standalone
+ * executable.  If nothing was preloaded return an error.
  */
 int kernel_kexec(void)
 {
 	int error = 0;
 
-	if (xchg(&kexec_lock, 1))
+	if (!mutex_trylock(&kexec_mutex))
 		return -EBUSY;
 	if (!kexec_image) {
 		error = -EINVAL;
 		goto Unlock;
 	}
 
-	if (kexec_image->preserve_context) {
 #ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context) {
 		mutex_lock(&pm_mutex);
 		pm_prepare_console();
 		error = freeze_processes();
@@ -1459,6 +1445,7 @@ int kernel_kexec(void)
 		error = disable_nonboot_cpus();
 		if (error)
 			goto Resume_devices;
+		device_pm_lock();
 		local_irq_disable();
 		/* At this point, device_suspend() has been called,
 		 * but *not* device_power_down(). We *must*
@@ -1470,26 +1457,22 @@ int kernel_kexec(void)
 		error = device_power_down(PMSG_FREEZE);
 		if (error)
 			goto Enable_irqs;
-		save_processor_state();
+	} else
 #endif
-	} else {
-		blocking_notifier_call_chain(&reboot_notifier_list,
-					     SYS_RESTART, NULL);
-		system_state = SYSTEM_RESTART;
-		device_shutdown();
-		sysdev_shutdown();
+	{
+		kernel_restart_prepare(NULL);
 		printk(KERN_EMERG "Starting new kernel\n");
 		machine_shutdown();
 	}
 
 	machine_kexec(kexec_image);
 
-	if (kexec_image->preserve_context) {
 #ifdef CONFIG_KEXEC_JUMP
-		restore_processor_state();
+	if (kexec_image->preserve_context) {
 		device_power_up(PMSG_RESTORE);
  Enable_irqs:
 		local_irq_enable();
+		device_pm_unlock();
 		enable_nonboot_cpus();
  Resume_devices:
 		device_resume(PMSG_RESTORE);
@@ -1499,11 +1482,10 @@ int kernel_kexec(void)
  Restore_console:
 		pm_restore_console();
 		mutex_unlock(&pm_mutex);
-#endif
 	}
+#endif
 
  Unlock:
-	xchg(&kexec_lock, 0);
-
+	mutex_unlock(&kexec_mutex);
 	return error;
 }
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 3ec23c3ec97..eaa21fc9ad1 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -56,12 +56,14 @@
 
 static int kgdb_break_asap;
 
+#define KGDB_MAX_THREAD_QUERY 17
 struct kgdb_state {
 	int			ex_vector;
 	int			signo;
 	int			err_code;
 	int			cpu;
 	int			pass_exception;
+	unsigned long		thr_query;
 	unsigned long		threadid;
 	long			kgdb_usethreadid;
 	struct pt_regs		*linux_regs;
@@ -166,13 +168,6 @@ early_param("nokgdbroundup", opt_nokgdbroundup);
  * Weak aliases for breakpoint management,
  * can be overriden by architectures when needed:
  */
-int __weak kgdb_validate_break_address(unsigned long addr)
-{
-	char tmp_variable[BREAK_INSTR_SIZE];
-
-	return probe_kernel_read(tmp_variable, (char *)addr, BREAK_INSTR_SIZE);
-}
-
 int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
 {
 	int err;
@@ -191,6 +186,25 @@ int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
 				  (char *)bundle, BREAK_INSTR_SIZE);
 }
 
+int __weak kgdb_validate_break_address(unsigned long addr)
+{
+	char tmp_variable[BREAK_INSTR_SIZE];
+	int err;
+	/* Validate setting the breakpoint and then removing it.  In the
+	 * remove fails, the kernel needs to emit a bad message because we
+	 * are deep trouble not being able to put things back the way we
+	 * found them.
+	 */
+	err = kgdb_arch_set_breakpoint(addr, tmp_variable);
+	if (err)
+		return err;
+	err = kgdb_arch_remove_breakpoint(addr, tmp_variable);
+	if (err)
+		printk(KERN_ERR "KGDB: Critical breakpoint error, kernel "
+		   "memory destroyed at: %lx", addr);
+	return err;
+}
+
 unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs)
 {
 	return instruction_pointer(regs);
@@ -433,9 +447,14 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val)
 {
 	int hex_val;
 	int num = 0;
+	int negate = 0;
 
 	*long_val = 0;
 
+	if (**ptr == '-') {
+		negate = 1;
+		(*ptr)++;
+	}
 	while (**ptr) {
 		hex_val = hex(**ptr);
 		if (hex_val < 0)
@@ -446,6 +465,9 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val)
 		(*ptr)++;
 	}
 
+	if (negate)
+		*long_val = -*long_val;
+
 	return num;
 }
 
@@ -515,10 +537,16 @@ static void int_to_threadref(unsigned char *id, int value)
 static struct task_struct *getthread(struct pt_regs *regs, int tid)
 {
 	/*
-	 * Non-positive TIDs are remapped idle tasks:
+	 * Non-positive TIDs are remapped to the cpu shadow information
 	 */
-	if (tid <= 0)
-		return idle_task(-tid);
+	if (tid == 0 || tid == -1)
+		tid = -atomic_read(&kgdb_active) - 2;
+	if (tid < 0) {
+		if (kgdb_info[-tid - 2].task)
+			return kgdb_info[-tid - 2].task;
+		else
+			return idle_task(-tid - 2);
+	}
 
 	/*
 	 * find_task_by_pid_ns() does not take the tasklist lock anymore
@@ -725,14 +753,15 @@ setundefined:
 }
 
 /*
- * Remap normal tasks to their real PID, idle tasks to -1 ... -NR_CPUs:
+ * Remap normal tasks to their real PID,
+ * CPU shadow threads are mapped to -CPU - 2
  */
 static inline int shadow_pid(int realpid)
 {
 	if (realpid)
 		return realpid;
 
-	return -1-raw_smp_processor_id();
+	return -raw_smp_processor_id() - 2;
 }
 
 static char gdbmsgbuf[BUFMAX + 1];
@@ -826,7 +855,7 @@ static void gdb_cmd_getregs(struct kgdb_state *ks)
 		local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
 	} else {
 		local_debuggerinfo = NULL;
-		for (i = 0; i < NR_CPUS; i++) {
+		for_each_online_cpu(i) {
 			/*
 			 * Try to find the task on some other
 			 * or possibly this node if we do not
@@ -960,10 +989,13 @@ static int gdb_cmd_reboot(struct kgdb_state *ks)
 /* Handle the 'q' query packets */
 static void gdb_cmd_query(struct kgdb_state *ks)
 {
-	struct task_struct *thread;
+	struct task_struct *g;
+	struct task_struct *p;
 	unsigned char thref[8];
 	char *ptr;
 	int i;
+	int cpu;
+	int finished = 0;
 
 	switch (remcom_in_buffer[1]) {
 	case 's':
@@ -973,22 +1005,34 @@ static void gdb_cmd_query(struct kgdb_state *ks)
 			break;
 		}
 
-		if (remcom_in_buffer[1] == 'f')
-			ks->threadid = 1;
-
+		i = 0;
 		remcom_out_buffer[0] = 'm';
 		ptr = remcom_out_buffer + 1;
-
-		for (i = 0; i < 17; ks->threadid++) {
-			thread = getthread(ks->linux_regs, ks->threadid);
-			if (thread) {
-				int_to_threadref(thref, ks->threadid);
+		if (remcom_in_buffer[1] == 'f') {
+			/* Each cpu is a shadow thread */
+			for_each_online_cpu(cpu) {
+				ks->thr_query = 0;
+				int_to_threadref(thref, -cpu - 2);
 				pack_threadid(ptr, thref);
 				ptr += BUF_THREAD_ID_SIZE;
 				*(ptr++) = ',';
 				i++;
 			}
 		}
+
+		do_each_thread(g, p) {
+			if (i >= ks->thr_query && !finished) {
+				int_to_threadref(thref, p->pid);
+				pack_threadid(ptr, thref);
+				ptr += BUF_THREAD_ID_SIZE;
+				*(ptr++) = ',';
+				ks->thr_query++;
+				if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
+					finished = 1;
+			}
+			i++;
+		} while_each_thread(g, p);
+
 		*(--ptr) = '\0';
 		break;
 
@@ -1011,15 +1055,15 @@ static void gdb_cmd_query(struct kgdb_state *ks)
 			error_packet(remcom_out_buffer, -EINVAL);
 			break;
 		}
-		if (ks->threadid > 0) {
+		if ((int)ks->threadid > 0) {
 			kgdb_mem2hex(getthread(ks->linux_regs,
 					ks->threadid)->comm,
 					remcom_out_buffer, 16);
 		} else {
 			static char tmpstr[23 + BUF_THREAD_ID_SIZE];
 
-			sprintf(tmpstr, "Shadow task %d for pid 0",
-					(int)(-ks->threadid-1));
+			sprintf(tmpstr, "shadowCPU%d",
+					(int)(-ks->threadid - 2));
 			kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
 		}
 		break;
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index d38a6436297..dbda475b13b 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -124,6 +124,15 @@ static struct lock_list list_entries[MAX_LOCKDEP_ENTRIES];
 unsigned long nr_lock_classes;
 static struct lock_class lock_classes[MAX_LOCKDEP_KEYS];
 
+static inline struct lock_class *hlock_class(struct held_lock *hlock)
+{
+	if (!hlock->class_idx) {
+		DEBUG_LOCKS_WARN_ON(1);
+		return NULL;
+	}
+	return lock_classes + hlock->class_idx - 1;
+}
+
 #ifdef CONFIG_LOCK_STAT
 static DEFINE_PER_CPU(struct lock_class_stats[MAX_LOCKDEP_KEYS], lock_stats);
 
@@ -222,7 +231,7 @@ static void lock_release_holdtime(struct held_lock *hlock)
 
 	holdtime = sched_clock() - hlock->holdtime_stamp;
 
-	stats = get_lock_stats(hlock->class);
+	stats = get_lock_stats(hlock_class(hlock));
 	if (hlock->read)
 		lock_time_inc(&stats->read_holdtime, holdtime);
 	else
@@ -372,6 +381,19 @@ unsigned int nr_process_chains;
 unsigned int max_lockdep_depth;
 unsigned int max_recursion_depth;
 
+static unsigned int lockdep_dependency_gen_id;
+
+static bool lockdep_dependency_visit(struct lock_class *source,
+				     unsigned int depth)
+{
+	if (!depth)
+		lockdep_dependency_gen_id++;
+	if (source->dep_gen_id == lockdep_dependency_gen_id)
+		return true;
+	source->dep_gen_id = lockdep_dependency_gen_id;
+	return false;
+}
+
 #ifdef CONFIG_DEBUG_LOCKDEP
 /*
  * We cannot printk in early bootup code. Not even early_printk()
@@ -505,7 +527,7 @@ static void print_lockdep_cache(struct lockdep_map *lock)
 
 static void print_lock(struct held_lock *hlock)
 {
-	print_lock_name(hlock->class);
+	print_lock_name(hlock_class(hlock));
 	printk(", at: ");
 	print_ip_sym(hlock->acquire_ip);
 }
@@ -558,6 +580,9 @@ static void print_lock_dependencies(struct lock_class *class, int depth)
 {
 	struct lock_list *entry;
 
+	if (lockdep_dependency_visit(class, depth))
+		return;
+
 	if (DEBUG_LOCKS_WARN_ON(depth >= 20))
 		return;
 
@@ -850,11 +875,11 @@ static int add_lock_to_list(struct lock_class *class, struct lock_class *this,
 	if (!entry)
 		return 0;
 
-	entry->class = this;
-	entry->distance = distance;
 	if (!save_trace(&entry->trace))
 		return 0;
 
+	entry->class = this;
+	entry->distance = distance;
 	/*
 	 * Since we never remove from the dependency list, the list can
 	 * be walked lockless by other CPUs, it's only allocation
@@ -932,7 +957,7 @@ static noinline int print_circular_bug_tail(void)
 	if (debug_locks_silent)
 		return 0;
 
-	this.class = check_source->class;
+	this.class = hlock_class(check_source);
 	if (!save_trace(&this.trace))
 		return 0;
 
@@ -959,6 +984,67 @@ static int noinline print_infinite_recursion_bug(void)
 	return 0;
 }
 
+unsigned long __lockdep_count_forward_deps(struct lock_class *class,
+					   unsigned int depth)
+{
+	struct lock_list *entry;
+	unsigned long ret = 1;
+
+	if (lockdep_dependency_visit(class, depth))
+		return 0;
+
+	/*
+	 * Recurse this class's dependency list:
+	 */
+	list_for_each_entry(entry, &class->locks_after, entry)
+		ret += __lockdep_count_forward_deps(entry->class, depth + 1);
+
+	return ret;
+}
+
+unsigned long lockdep_count_forward_deps(struct lock_class *class)
+{
+	unsigned long ret, flags;
+
+	local_irq_save(flags);
+	__raw_spin_lock(&lockdep_lock);
+	ret = __lockdep_count_forward_deps(class, 0);
+	__raw_spin_unlock(&lockdep_lock);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+unsigned long __lockdep_count_backward_deps(struct lock_class *class,
+					    unsigned int depth)
+{
+	struct lock_list *entry;
+	unsigned long ret = 1;
+
+	if (lockdep_dependency_visit(class, depth))
+		return 0;
+	/*
+	 * Recurse this class's dependency list:
+	 */
+	list_for_each_entry(entry, &class->locks_before, entry)
+		ret += __lockdep_count_backward_deps(entry->class, depth + 1);
+
+	return ret;
+}
+
+unsigned long lockdep_count_backward_deps(struct lock_class *class)
+{
+	unsigned long ret, flags;
+
+	local_irq_save(flags);
+	__raw_spin_lock(&lockdep_lock);
+	ret = __lockdep_count_backward_deps(class, 0);
+	__raw_spin_unlock(&lockdep_lock);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
 /*
  * Prove that the dependency graph starting at <entry> can not
  * lead to <target>. Print an error and return 0 if it does.
@@ -968,6 +1054,9 @@ check_noncircular(struct lock_class *source, unsigned int depth)
 {
 	struct lock_list *entry;
 
+	if (lockdep_dependency_visit(source, depth))
+		return 1;
+
 	debug_atomic_inc(&nr_cyclic_check_recursions);
 	if (depth > max_recursion_depth)
 		max_recursion_depth = depth;
@@ -977,7 +1066,7 @@ check_noncircular(struct lock_class *source, unsigned int depth)
 	 * Check this lock's dependency list:
 	 */
 	list_for_each_entry(entry, &source->locks_after, entry) {
-		if (entry->class == check_target->class)
+		if (entry->class == hlock_class(check_target))
 			return print_circular_bug_header(entry, depth+1);
 		debug_atomic_inc(&nr_cyclic_checks);
 		if (!check_noncircular(entry->class, depth+1))
@@ -1011,6 +1100,9 @@ find_usage_forwards(struct lock_class *source, unsigned int depth)
 	struct lock_list *entry;
 	int ret;
 
+	if (lockdep_dependency_visit(source, depth))
+		return 1;
+
 	if (depth > max_recursion_depth)
 		max_recursion_depth = depth;
 	if (depth >= RECURSION_LIMIT)
@@ -1050,6 +1142,9 @@ find_usage_backwards(struct lock_class *source, unsigned int depth)
 	struct lock_list *entry;
 	int ret;
 
+	if (lockdep_dependency_visit(source, depth))
+		return 1;
+
 	if (!__raw_spin_is_locked(&lockdep_lock))
 		return DEBUG_LOCKS_WARN_ON(1);
 
@@ -1064,6 +1159,11 @@ find_usage_backwards(struct lock_class *source, unsigned int depth)
 		return 2;
 	}
 
+	if (!source && debug_locks_off_graph_unlock()) {
+		WARN_ON(1);
+		return 0;
+	}
+
 	/*
 	 * Check this lock's dependency list:
 	 */
@@ -1103,9 +1203,9 @@ print_bad_irq_dependency(struct task_struct *curr,
 	printk("\nand this task is already holding:\n");
 	print_lock(prev);
 	printk("which would create a new lock dependency:\n");
-	print_lock_name(prev->class);
+	print_lock_name(hlock_class(prev));
 	printk(" ->");
-	print_lock_name(next->class);
+	print_lock_name(hlock_class(next));
 	printk("\n");
 
 	printk("\nbut this new dependency connects a %s-irq-safe lock:\n",
@@ -1146,12 +1246,12 @@ check_usage(struct task_struct *curr, struct held_lock *prev,
 
 	find_usage_bit = bit_backwards;
 	/* fills in <backwards_match> */
-	ret = find_usage_backwards(prev->class, 0);
+	ret = find_usage_backwards(hlock_class(prev), 0);
 	if (!ret || ret == 1)
 		return ret;
 
 	find_usage_bit = bit_forwards;
-	ret = find_usage_forwards(next->class, 0);
+	ret = find_usage_forwards(hlock_class(next), 0);
 	if (!ret || ret == 1)
 		return ret;
 	/* ret == 2 */
@@ -1272,18 +1372,32 @@ check_deadlock(struct task_struct *curr, struct held_lock *next,
 	       struct lockdep_map *next_instance, int read)
 {
 	struct held_lock *prev;
+	struct held_lock *nest = NULL;
 	int i;
 
 	for (i = 0; i < curr->lockdep_depth; i++) {
 		prev = curr->held_locks + i;
-		if (prev->class != next->class)
+
+		if (prev->instance == next->nest_lock)
+			nest = prev;
+
+		if (hlock_class(prev) != hlock_class(next))
 			continue;
+
 		/*
 		 * Allow read-after-read recursion of the same
 		 * lock class (i.e. read_lock(lock)+read_lock(lock)):
 		 */
 		if ((read == 2) && prev->read)
 			return 2;
+
+		/*
+		 * We're holding the nest_lock, which serializes this lock's
+		 * nesting behaviour.
+		 */
+		if (nest)
+			return 2;
+
 		return print_deadlock_bug(curr, prev, next);
 	}
 	return 1;
@@ -1329,7 +1443,7 @@ check_prev_add(struct task_struct *curr, struct held_lock *prev,
 	 */
 	check_source = next;
 	check_target = prev;
-	if (!(check_noncircular(next->class, 0)))
+	if (!(check_noncircular(hlock_class(next), 0)))
 		return print_circular_bug_tail();
 
 	if (!check_prev_add_irq(curr, prev, next))
@@ -1353,8 +1467,8 @@ check_prev_add(struct task_struct *curr, struct held_lock *prev,
 	 *  chains - the second one will be new, but L1 already has
 	 *  L2 added to its dependency list, due to the first chain.)
 	 */
-	list_for_each_entry(entry, &prev->class->locks_after, entry) {
-		if (entry->class == next->class) {
+	list_for_each_entry(entry, &hlock_class(prev)->locks_after, entry) {
+		if (entry->class == hlock_class(next)) {
 			if (distance == 1)
 				entry->distance = 1;
 			return 2;
@@ -1365,26 +1479,28 @@ check_prev_add(struct task_struct *curr, struct held_lock *prev,
 	 * Ok, all validations passed, add the new lock
 	 * to the previous lock's dependency list:
 	 */
-	ret = add_lock_to_list(prev->class, next->class,
-			       &prev->class->locks_after, next->acquire_ip, distance);
+	ret = add_lock_to_list(hlock_class(prev), hlock_class(next),
+			       &hlock_class(prev)->locks_after,
+			       next->acquire_ip, distance);
 
 	if (!ret)
 		return 0;
 
-	ret = add_lock_to_list(next->class, prev->class,
-			       &next->class->locks_before, next->acquire_ip, distance);
+	ret = add_lock_to_list(hlock_class(next), hlock_class(prev),
+			       &hlock_class(next)->locks_before,
+			       next->acquire_ip, distance);
 	if (!ret)
 		return 0;
 
 	/*
 	 * Debugging printouts:
 	 */
-	if (verbose(prev->class) || verbose(next->class)) {
+	if (verbose(hlock_class(prev)) || verbose(hlock_class(next))) {
 		graph_unlock();
 		printk("\n new dependency: ");
-		print_lock_name(prev->class);
+		print_lock_name(hlock_class(prev));
 		printk(" => ");
-		print_lock_name(next->class);
+		print_lock_name(hlock_class(next));
 		printk("\n");
 		dump_stack();
 		return graph_lock();
@@ -1481,7 +1597,7 @@ static inline int lookup_chain_cache(struct task_struct *curr,
 				     struct held_lock *hlock,
 				     u64 chain_key)
 {
-	struct lock_class *class = hlock->class;
+	struct lock_class *class = hlock_class(hlock);
 	struct list_head *hash_head = chainhashentry(chain_key);
 	struct lock_chain *chain;
 	struct held_lock *hlock_curr, *hlock_next;
@@ -1554,7 +1670,7 @@ cache_hit:
 	if (likely(cn + chain->depth <= MAX_LOCKDEP_CHAIN_HLOCKS)) {
 		chain->base = cn;
 		for (j = 0; j < chain->depth - 1; j++, i++) {
-			int lock_id = curr->held_locks[i].class - lock_classes;
+			int lock_id = curr->held_locks[i].class_idx - 1;
 			chain_hlocks[chain->base + j] = lock_id;
 		}
 		chain_hlocks[chain->base + j] = class - lock_classes;
@@ -1643,14 +1759,13 @@ static void check_chain_key(struct task_struct *curr)
 		hlock = curr->held_locks + i;
 		if (chain_key != hlock->prev_chain_key) {
 			debug_locks_off();
-			printk("hm#1, depth: %u [%u], %016Lx != %016Lx\n",
+			WARN(1, "hm#1, depth: %u [%u], %016Lx != %016Lx\n",
 				curr->lockdep_depth, i,
 				(unsigned long long)chain_key,
 				(unsigned long long)hlock->prev_chain_key);
-			WARN_ON(1);
 			return;
 		}
-		id = hlock->class - lock_classes;
+		id = hlock->class_idx - 1;
 		if (DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS))
 			return;
 
@@ -1662,11 +1777,10 @@ static void check_chain_key(struct task_struct *curr)
 	}
 	if (chain_key != curr->curr_chain_key) {
 		debug_locks_off();
-		printk("hm#2, depth: %u [%u], %016Lx != %016Lx\n",
+		WARN(1, "hm#2, depth: %u [%u], %016Lx != %016Lx\n",
 			curr->lockdep_depth, i,
 			(unsigned long long)chain_key,
 			(unsigned long long)curr->curr_chain_key);
-		WARN_ON(1);
 	}
 #endif
 }
@@ -1695,7 +1809,7 @@ print_usage_bug(struct task_struct *curr, struct held_lock *this,
 	print_lock(this);
 
 	printk("{%s} state was registered at:\n", usage_str[prev_bit]);
-	print_stack_trace(this->class->usage_traces + prev_bit, 1);
+	print_stack_trace(hlock_class(this)->usage_traces + prev_bit, 1);
 
 	print_irqtrace_events(curr);
 	printk("\nother info that might help us debug this:\n");
@@ -1714,7 +1828,7 @@ static inline int
 valid_state(struct task_struct *curr, struct held_lock *this,
 	    enum lock_usage_bit new_bit, enum lock_usage_bit bad_bit)
 {
-	if (unlikely(this->class->usage_mask & (1 << bad_bit)))
+	if (unlikely(hlock_class(this)->usage_mask & (1 << bad_bit)))
 		return print_usage_bug(curr, this, bad_bit, new_bit);
 	return 1;
 }
@@ -1753,7 +1867,7 @@ print_irq_inversion_bug(struct task_struct *curr, struct lock_class *other,
 	lockdep_print_held_locks(curr);
 
 	printk("\nthe first lock's dependencies:\n");
-	print_lock_dependencies(this->class, 0);
+	print_lock_dependencies(hlock_class(this), 0);
 
 	printk("\nthe second lock's dependencies:\n");
 	print_lock_dependencies(other, 0);
@@ -1776,7 +1890,7 @@ check_usage_forwards(struct task_struct *curr, struct held_lock *this,
 
 	find_usage_bit = bit;
 	/* fills in <forwards_match> */
-	ret = find_usage_forwards(this->class, 0);
+	ret = find_usage_forwards(hlock_class(this), 0);
 	if (!ret || ret == 1)
 		return ret;
 
@@ -1795,7 +1909,7 @@ check_usage_backwards(struct task_struct *curr, struct held_lock *this,
 
 	find_usage_bit = bit;
 	/* fills in <backwards_match> */
-	ret = find_usage_backwards(this->class, 0);
+	ret = find_usage_backwards(hlock_class(this), 0);
 	if (!ret || ret == 1)
 		return ret;
 
@@ -1861,7 +1975,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 				LOCK_ENABLED_HARDIRQS_READ, "hard-read"))
 			return 0;
 #endif
-		if (hardirq_verbose(this->class))
+		if (hardirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_USED_IN_SOFTIRQ:
@@ -1886,7 +2000,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 				LOCK_ENABLED_SOFTIRQS_READ, "soft-read"))
 			return 0;
 #endif
-		if (softirq_verbose(this->class))
+		if (softirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_USED_IN_HARDIRQ_READ:
@@ -1899,7 +2013,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 		if (!check_usage_forwards(curr, this,
 					  LOCK_ENABLED_HARDIRQS, "hard"))
 			return 0;
-		if (hardirq_verbose(this->class))
+		if (hardirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_USED_IN_SOFTIRQ_READ:
@@ -1912,7 +2026,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 		if (!check_usage_forwards(curr, this,
 					  LOCK_ENABLED_SOFTIRQS, "soft"))
 			return 0;
-		if (softirq_verbose(this->class))
+		if (softirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_ENABLED_HARDIRQS:
@@ -1938,7 +2052,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 				   LOCK_USED_IN_HARDIRQ_READ, "hard-read"))
 			return 0;
 #endif
-		if (hardirq_verbose(this->class))
+		if (hardirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_ENABLED_SOFTIRQS:
@@ -1964,7 +2078,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 				   LOCK_USED_IN_SOFTIRQ_READ, "soft-read"))
 			return 0;
 #endif
-		if (softirq_verbose(this->class))
+		if (softirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_ENABLED_HARDIRQS_READ:
@@ -1979,7 +2093,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 					   LOCK_USED_IN_HARDIRQ, "hard"))
 			return 0;
 #endif
-		if (hardirq_verbose(this->class))
+		if (hardirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	case LOCK_ENABLED_SOFTIRQS_READ:
@@ -1994,7 +2108,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this,
 					   LOCK_USED_IN_SOFTIRQ, "soft"))
 			return 0;
 #endif
-		if (softirq_verbose(this->class))
+		if (softirq_verbose(hlock_class(this)))
 			ret = 2;
 		break;
 	default:
@@ -2310,7 +2424,7 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this,
 	 * If already set then do not dirty the cacheline,
 	 * nor do any checks:
 	 */
-	if (likely(this->class->usage_mask & new_mask))
+	if (likely(hlock_class(this)->usage_mask & new_mask))
 		return 1;
 
 	if (!graph_lock())
@@ -2318,14 +2432,14 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this,
 	/*
 	 * Make sure we didnt race:
 	 */
-	if (unlikely(this->class->usage_mask & new_mask)) {
+	if (unlikely(hlock_class(this)->usage_mask & new_mask)) {
 		graph_unlock();
 		return 1;
 	}
 
-	this->class->usage_mask |= new_mask;
+	hlock_class(this)->usage_mask |= new_mask;
 
-	if (!save_trace(this->class->usage_traces + new_bit))
+	if (!save_trace(hlock_class(this)->usage_traces + new_bit))
 		return 0;
 
 	switch (new_bit) {
@@ -2405,7 +2519,7 @@ EXPORT_SYMBOL_GPL(lockdep_init_map);
  */
 static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 			  int trylock, int read, int check, int hardirqs_off,
-			  unsigned long ip)
+			  struct lockdep_map *nest_lock, unsigned long ip)
 {
 	struct task_struct *curr = current;
 	struct lock_class *class = NULL;
@@ -2459,14 +2573,16 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 		return 0;
 
 	hlock = curr->held_locks + depth;
-
-	hlock->class = class;
+	if (DEBUG_LOCKS_WARN_ON(!class))
+		return 0;
+	hlock->class_idx = class - lock_classes + 1;
 	hlock->acquire_ip = ip;
 	hlock->instance = lock;
+	hlock->nest_lock = nest_lock;
 	hlock->trylock = trylock;
 	hlock->read = read;
 	hlock->check = check;
-	hlock->hardirqs_off = hardirqs_off;
+	hlock->hardirqs_off = !!hardirqs_off;
 #ifdef CONFIG_LOCK_STAT
 	hlock->waittime_stamp = 0;
 	hlock->holdtime_stamp = sched_clock();
@@ -2574,6 +2690,55 @@ static int check_unlock(struct task_struct *curr, struct lockdep_map *lock,
 	return 1;
 }
 
+static int
+__lock_set_subclass(struct lockdep_map *lock,
+		    unsigned int subclass, unsigned long ip)
+{
+	struct task_struct *curr = current;
+	struct held_lock *hlock, *prev_hlock;
+	struct lock_class *class;
+	unsigned int depth;
+	int i;
+
+	depth = curr->lockdep_depth;
+	if (DEBUG_LOCKS_WARN_ON(!depth))
+		return 0;
+
+	prev_hlock = NULL;
+	for (i = depth-1; i >= 0; i--) {
+		hlock = curr->held_locks + i;
+		/*
+		 * We must not cross into another context:
+		 */
+		if (prev_hlock && prev_hlock->irq_context != hlock->irq_context)
+			break;
+		if (hlock->instance == lock)
+			goto found_it;
+		prev_hlock = hlock;
+	}
+	return print_unlock_inbalance_bug(curr, lock, ip);
+
+found_it:
+	class = register_lock_class(lock, subclass, 0);
+	hlock->class_idx = class - lock_classes + 1;
+
+	curr->lockdep_depth = i;
+	curr->curr_chain_key = hlock->prev_chain_key;
+
+	for (; i < depth; i++) {
+		hlock = curr->held_locks + i;
+		if (!__lock_acquire(hlock->instance,
+			hlock_class(hlock)->subclass, hlock->trylock,
+				hlock->read, hlock->check, hlock->hardirqs_off,
+				hlock->nest_lock, hlock->acquire_ip))
+			return 0;
+	}
+
+	if (DEBUG_LOCKS_WARN_ON(curr->lockdep_depth != depth))
+		return 0;
+	return 1;
+}
+
 /*
  * Remove the lock to the list of currently held locks in a
  * potentially non-nested (out of order) manner. This is a
@@ -2624,9 +2789,9 @@ found_it:
 	for (i++; i < depth; i++) {
 		hlock = curr->held_locks + i;
 		if (!__lock_acquire(hlock->instance,
-			hlock->class->subclass, hlock->trylock,
+			hlock_class(hlock)->subclass, hlock->trylock,
 				hlock->read, hlock->check, hlock->hardirqs_off,
-				hlock->acquire_ip))
+				hlock->nest_lock, hlock->acquire_ip))
 			return 0;
 	}
 
@@ -2669,7 +2834,7 @@ static int lock_release_nested(struct task_struct *curr,
 
 #ifdef CONFIG_DEBUG_LOCKDEP
 	hlock->prev_chain_key = 0;
-	hlock->class = NULL;
+	hlock->class_idx = 0;
 	hlock->acquire_ip = 0;
 	hlock->irq_context = 0;
 #endif
@@ -2738,18 +2903,36 @@ static void check_flags(unsigned long flags)
 #endif
 }
 
+void
+lock_set_subclass(struct lockdep_map *lock,
+		  unsigned int subclass, unsigned long ip)
+{
+	unsigned long flags;
+
+	if (unlikely(current->lockdep_recursion))
+		return;
+
+	raw_local_irq_save(flags);
+	current->lockdep_recursion = 1;
+	check_flags(flags);
+	if (__lock_set_subclass(lock, subclass, ip))
+		check_chain_key(current);
+	current->lockdep_recursion = 0;
+	raw_local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL_GPL(lock_set_subclass);
+
 /*
  * We are not always called with irqs disabled - do that here,
  * and also avoid lockdep recursion:
  */
 void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
-			  int trylock, int read, int check, unsigned long ip)
+			  int trylock, int read, int check,
+			  struct lockdep_map *nest_lock, unsigned long ip)
 {
 	unsigned long flags;
 
-	if (unlikely(!lock_stat && !prove_locking))
-		return;
-
 	if (unlikely(current->lockdep_recursion))
 		return;
 
@@ -2758,7 +2941,7 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 
 	current->lockdep_recursion = 1;
 	__lock_acquire(lock, subclass, trylock, read, check,
-		       irqs_disabled_flags(flags), ip);
+		       irqs_disabled_flags(flags), nest_lock, ip);
 	current->lockdep_recursion = 0;
 	raw_local_irq_restore(flags);
 }
@@ -2770,9 +2953,6 @@ void lock_release(struct lockdep_map *lock, int nested,
 {
 	unsigned long flags;
 
-	if (unlikely(!lock_stat && !prove_locking))
-		return;
-
 	if (unlikely(current->lockdep_recursion))
 		return;
 
@@ -2845,11 +3025,11 @@ __lock_contended(struct lockdep_map *lock, unsigned long ip)
 found_it:
 	hlock->waittime_stamp = sched_clock();
 
-	point = lock_contention_point(hlock->class, ip);
+	point = lock_contention_point(hlock_class(hlock), ip);
 
-	stats = get_lock_stats(hlock->class);
+	stats = get_lock_stats(hlock_class(hlock));
 	if (point < ARRAY_SIZE(stats->contention_point))
-		stats->contention_point[i]++;
+		stats->contention_point[point]++;
 	if (lock->cpu != smp_processor_id())
 		stats->bounces[bounce_contended + !!hlock->read]++;
 	put_lock_stats(stats);
@@ -2893,7 +3073,7 @@ found_it:
 		hlock->holdtime_stamp = now;
 	}
 
-	stats = get_lock_stats(hlock->class);
+	stats = get_lock_stats(hlock_class(hlock));
 	if (waittime) {
 		if (hlock->read)
 			lock_time_inc(&stats->read_waittime, waittime);
@@ -2988,6 +3168,7 @@ static void zap_class(struct lock_class *class)
 	list_del_rcu(&class->hash_entry);
 	list_del_rcu(&class->lock_entry);
 
+	class->key = NULL;
 }
 
 static inline int within(const void *addr, void *start, unsigned long size)
diff --git a/kernel/lockdep_internals.h b/kernel/lockdep_internals.h
index c3600a091a2..56b196932c0 100644
--- a/kernel/lockdep_internals.h
+++ b/kernel/lockdep_internals.h
@@ -17,9 +17,6 @@
  */
 #define MAX_LOCKDEP_ENTRIES	8192UL
 
-#define MAX_LOCKDEP_KEYS_BITS	11
-#define MAX_LOCKDEP_KEYS	(1UL << MAX_LOCKDEP_KEYS_BITS)
-
 #define MAX_LOCKDEP_CHAINS_BITS	14
 #define MAX_LOCKDEP_CHAINS	(1UL << MAX_LOCKDEP_CHAINS_BITS)
 
@@ -53,6 +50,22 @@ extern unsigned int nr_process_chains;
 extern unsigned int max_lockdep_depth;
 extern unsigned int max_recursion_depth;
 
+#ifdef CONFIG_PROVE_LOCKING
+extern unsigned long lockdep_count_forward_deps(struct lock_class *);
+extern unsigned long lockdep_count_backward_deps(struct lock_class *);
+#else
+static inline unsigned long
+lockdep_count_forward_deps(struct lock_class *class)
+{
+	return 0;
+}
+static inline unsigned long
+lockdep_count_backward_deps(struct lock_class *class)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_DEBUG_LOCKDEP
 /*
  * Various lockdep statistics:
diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c
index 9b0e940e254..20dbcbf9c7d 100644
--- a/kernel/lockdep_proc.c
+++ b/kernel/lockdep_proc.c
@@ -63,34 +63,6 @@ static void l_stop(struct seq_file *m, void *v)
 {
 }
 
-static unsigned long count_forward_deps(struct lock_class *class)
-{
-	struct lock_list *entry;
-	unsigned long ret = 1;
-
-	/*
-	 * Recurse this class's dependency list:
-	 */
-	list_for_each_entry(entry, &class->locks_after, entry)
-		ret += count_forward_deps(entry->class);
-
-	return ret;
-}
-
-static unsigned long count_backward_deps(struct lock_class *class)
-{
-	struct lock_list *entry;
-	unsigned long ret = 1;
-
-	/*
-	 * Recurse this class's dependency list:
-	 */
-	list_for_each_entry(entry, &class->locks_before, entry)
-		ret += count_backward_deps(entry->class);
-
-	return ret;
-}
-
 static void print_name(struct seq_file *m, struct lock_class *class)
 {
 	char str[128];
@@ -110,7 +82,6 @@ static void print_name(struct seq_file *m, struct lock_class *class)
 
 static int l_show(struct seq_file *m, void *v)
 {
-	unsigned long nr_forward_deps, nr_backward_deps;
 	struct lock_class *class = v;
 	struct lock_list *entry;
 	char c1, c2, c3, c4;
@@ -124,11 +95,10 @@ static int l_show(struct seq_file *m, void *v)
 #ifdef CONFIG_DEBUG_LOCKDEP
 	seq_printf(m, " OPS:%8ld", class->ops);
 #endif
-	nr_forward_deps = count_forward_deps(class);
-	seq_printf(m, " FD:%5ld", nr_forward_deps);
-
-	nr_backward_deps = count_backward_deps(class);
-	seq_printf(m, " BD:%5ld", nr_backward_deps);
+#ifdef CONFIG_PROVE_LOCKING
+	seq_printf(m, " FD:%5ld", lockdep_count_forward_deps(class));
+	seq_printf(m, " BD:%5ld", lockdep_count_backward_deps(class));
+#endif
 
 	get_usage_chars(class, &c1, &c2, &c3, &c4);
 	seq_printf(m, " %c%c%c%c", c1, c2, c3, c4);
@@ -229,6 +199,9 @@ static int lc_show(struct seq_file *m, void *v)
 
 	for (i = 0; i < chain->depth; i++) {
 		class = lock_chain_get_class(chain, i);
+		if (!class->key)
+			continue;
+
 		seq_printf(m, "[%p] ", class->key);
 		print_name(m, class);
 		seq_puts(m, "\n");
@@ -350,7 +323,9 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
 		if (class->usage_mask & LOCKF_ENABLED_HARDIRQS_READ)
 			nr_hardirq_read_unsafe++;
 
-		sum_forward_deps += count_forward_deps(class);
+#ifdef CONFIG_PROVE_LOCKING
+		sum_forward_deps += lockdep_count_forward_deps(class);
+#endif
 	}
 #ifdef CONFIG_DEBUG_LOCKDEP
 	DEBUG_LOCKS_WARN_ON(debug_atomic_read(&nr_unused_locks) != nr_unused);
@@ -497,8 +472,9 @@ static void snprint_time(char *buf, size_t bufsiz, s64 nr)
 {
 	unsigned long rem;
 
+	nr += 5; /* for display rounding */
 	rem = do_div(nr, 1000); /* XXX: do_div_signed */
-	snprintf(buf, bufsiz, "%lld.%02d", (long long)nr, ((int)rem+5)/10);
+	snprintf(buf, bufsiz, "%lld.%02d", (long long)nr, (int)rem/10);
 }
 
 static void seq_time(struct seq_file *m, s64 time)
diff --git a/kernel/marker.c b/kernel/marker.c
index 971da531790..7d1faecd7a5 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -126,6 +126,11 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...)
 		struct marker_probe_closure *multi;
 		int i;
 		/*
+		 * Read mdata->ptype before mdata->multi.
+		 */
+		smp_rmb();
+		multi = mdata->multi;
+		/*
 		 * multi points to an array, therefore accessing the array
 		 * depends on reading multi. However, even in this case,
 		 * we must insure that the pointer is read _before_ the array
@@ -133,7 +138,6 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...)
 		 * in the fast path, so put the explicit barrier here.
 		 */
 		smp_read_barrier_depends();
-		multi = mdata->multi;
 		for (i = 0; multi[i].func; i++) {
 			va_start(args, call_private);
 			multi[i].func(multi[i].probe_private, call_private,
@@ -175,6 +179,11 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...)
 		struct marker_probe_closure *multi;
 		int i;
 		/*
+		 * Read mdata->ptype before mdata->multi.
+		 */
+		smp_rmb();
+		multi = mdata->multi;
+		/*
 		 * multi points to an array, therefore accessing the array
 		 * depends on reading multi. However, even in this case,
 		 * we must insure that the pointer is read _before_ the array
@@ -182,7 +191,6 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...)
 		 * in the fast path, so put the explicit barrier here.
 		 */
 		smp_read_barrier_depends();
-		multi = mdata->multi;
 		for (i = 0; multi[i].func; i++)
 			multi[i].func(multi[i].probe_private, call_private,
 				mdata->format, &args);
diff --git a/kernel/module.c b/kernel/module.c
index 61d212120df..9db11911e04 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1799,7 +1799,7 @@ static void *module_alloc_update_bounds(unsigned long size)
 
 /* Allocate and load the module: note that size of section 0 is always
    zero, and we rely on this for optional sections. */
-static struct module *load_module(void __user *umod,
+static noinline struct module *load_module(void __user *umod,
 				  unsigned long len,
 				  const char __user *uargs)
 {
@@ -2288,7 +2288,7 @@ sys_init_module(void __user *umod,
 
 	/* Start the module */
 	if (mod->init != NULL)
-		ret = mod->init();
+		ret = do_one_initcall(mod->init);
 	if (ret < 0) {
 		/* Init routine failed: abort.  Try to protect us from
                    buggy refcounters. */
diff --git a/kernel/mutex.c b/kernel/mutex.c
index bcdc9ac8ef6..12c779dc65d 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -34,6 +34,7 @@
 /***
  * mutex_init - initialize the mutex
  * @lock: the mutex to be initialized
+ * @key: the lock_class_key for the class; used by mutex lock debugging
  *
  * Initialize the mutex to unlocked state.
  *
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index 21575fc46d0..1d3ef29a258 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/nsproxy.h>
 #include <linux/init_task.h>
 #include <linux/mnt_namespace.h>
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index ea567b78d1a..fab8ea86fac 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -179,9 +179,6 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
 		rc = sys_wait4(-1, NULL, __WALL, NULL);
 	} while (rc != -ECHILD);
 
-
-	/* Child reaper for the pid namespace is going away */
-	pid_ns->child_reaper = NULL;
 	acct_exit_ns(pid_ns);
 	return;
 }
diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c
index 8cb75702638..dfdec524d1b 100644
--- a/kernel/pm_qos_params.c
+++ b/kernel/pm_qos_params.c
@@ -24,7 +24,7 @@
  * requirement that the application has is cleaned up when closes the file
  * pointer or exits the pm_qos_object will get an opportunity to clean up.
  *
- * mark gross mgross@linux.intel.com
+ * Mark Gross <mgross@linux.intel.com>
  */
 
 #include <linux/pm_qos_params.h>
@@ -43,7 +43,7 @@
 #include <linux/uaccess.h>
 
 /*
- * locking rule: all changes to target_value or requirements or notifiers lists
+ * locking rule: all changes to requirements or notifiers lists
  * or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock
  * held, taken with _irqsave.  One lock to rule them all
  */
@@ -66,7 +66,7 @@ struct pm_qos_object {
 	struct miscdevice pm_qos_power_miscdev;
 	char *name;
 	s32 default_value;
-	s32 target_value;
+	atomic_t target_value;
 	s32 (*comparitor)(s32, s32);
 };
 
@@ -77,7 +77,7 @@ static struct pm_qos_object cpu_dma_pm_qos = {
 	.notifiers = &cpu_dma_lat_notifier,
 	.name = "cpu_dma_latency",
 	.default_value = 2000 * USEC_PER_SEC,
-	.target_value = 2000 * USEC_PER_SEC,
+	.target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
 	.comparitor = min_compare
 };
 
@@ -87,7 +87,7 @@ static struct pm_qos_object network_lat_pm_qos = {
 	.notifiers = &network_lat_notifier,
 	.name = "network_latency",
 	.default_value = 2000 * USEC_PER_SEC,
-	.target_value = 2000 * USEC_PER_SEC,
+	.target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
 	.comparitor = min_compare
 };
 
@@ -99,7 +99,7 @@ static struct pm_qos_object network_throughput_pm_qos = {
 	.notifiers = &network_throughput_notifier,
 	.name = "network_throughput",
 	.default_value = 0,
-	.target_value = 0,
+	.target_value = ATOMIC_INIT(0),
 	.comparitor = max_compare
 };
 
@@ -150,11 +150,11 @@ static void update_target(int target)
 		extreme_value = pm_qos_array[target]->comparitor(
 				extreme_value, node->value);
 	}
-	if (pm_qos_array[target]->target_value != extreme_value) {
+	if (atomic_read(&pm_qos_array[target]->target_value) != extreme_value) {
 		call_notifier = 1;
-		pm_qos_array[target]->target_value = extreme_value;
+		atomic_set(&pm_qos_array[target]->target_value, extreme_value);
 		pr_debug(KERN_ERR "new target for qos %d is %d\n", target,
-			pm_qos_array[target]->target_value);
+			atomic_read(&pm_qos_array[target]->target_value));
 	}
 	spin_unlock_irqrestore(&pm_qos_lock, flags);
 
@@ -193,14 +193,7 @@ static int find_pm_qos_object_by_minor(int minor)
  */
 int pm_qos_requirement(int pm_qos_class)
 {
-	int ret_val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&pm_qos_lock, flags);
-	ret_val = pm_qos_array[pm_qos_class]->target_value;
-	spin_unlock_irqrestore(&pm_qos_lock, flags);
-
-	return ret_val;
+	return atomic_read(&pm_qos_array[pm_qos_class]->target_value);
 }
 EXPORT_SYMBOL_GPL(pm_qos_requirement);
 
@@ -211,8 +204,8 @@ EXPORT_SYMBOL_GPL(pm_qos_requirement);
  * @value: defines the qos request
  *
  * This function inserts a new entry in the pm_qos_class list of requested qos
- * performance charactoistics.  It recomputes the agregate QoS expectations for
- * the pm_qos_class of parrameters.
+ * performance characteristics.  It recomputes the aggregate QoS expectations
+ * for the pm_qos_class of parameters.
  */
 int pm_qos_add_requirement(int pm_qos_class, char *name, s32 value)
 {
@@ -250,10 +243,10 @@ EXPORT_SYMBOL_GPL(pm_qos_add_requirement);
  * @name: identifies the request
  * @value: defines the qos request
  *
- * Updates an existing qos requierement for the pm_qos_class of parameters along
+ * Updates an existing qos requirement for the pm_qos_class of parameters along
  * with updating the target pm_qos_class value.
  *
- * If the named request isn't in the lest then no change is made.
+ * If the named request isn't in the list then no change is made.
  */
 int pm_qos_update_requirement(int pm_qos_class, char *name, s32 new_value)
 {
@@ -287,7 +280,7 @@ EXPORT_SYMBOL_GPL(pm_qos_update_requirement);
  * @pm_qos_class: identifies which list of qos request to us
  * @name: identifies the request
  *
- * Will remove named qos request from pm_qos_class list of parrameters and
+ * Will remove named qos request from pm_qos_class list of parameters and
  * recompute the current target value for the pm_qos_class.
  */
 void pm_qos_remove_requirement(int pm_qos_class, char *name)
@@ -319,7 +312,7 @@ EXPORT_SYMBOL_GPL(pm_qos_remove_requirement);
  * @notifier: notifier block managed by caller.
  *
  * will register the notifier into a notification chain that gets called
- * uppon changes to the pm_qos_class target value.
+ * upon changes to the pm_qos_class target value.
  */
  int pm_qos_add_notifier(int pm_qos_class, struct notifier_block *notifier)
 {
@@ -338,7 +331,7 @@ EXPORT_SYMBOL_GPL(pm_qos_add_notifier);
  * @notifier: notifier block to be removed.
  *
  * will remove the notifier from the notification chain that gets called
- * uppon changes to the pm_qos_class target value.
+ * upon changes to the pm_qos_class target value.
  */
 int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier)
 {
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 9a21681aa80..e36d5798cbf 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -289,21 +289,29 @@ void do_schedule_next_timer(struct siginfo *info)
 		else
 			schedule_next_timer(timr);
 
-		info->si_overrun = timr->it_overrun_last;
+		info->si_overrun += timr->it_overrun_last;
 	}
 
 	if (timr)
 		unlock_timer(timr, flags);
 }
 
-int posix_timer_event(struct k_itimer *timr,int si_private)
+int posix_timer_event(struct k_itimer *timr, int si_private)
 {
-	memset(&timr->sigq->info, 0, sizeof(siginfo_t));
+	/*
+	 * FIXME: if ->sigq is queued we can race with
+	 * dequeue_signal()->do_schedule_next_timer().
+	 *
+	 * If dequeue_signal() sees the "right" value of
+	 * si_sys_private it calls do_schedule_next_timer().
+	 * We re-queue ->sigq and drop ->it_lock().
+	 * do_schedule_next_timer() locks the timer
+	 * and re-schedules it while ->sigq is pending.
+	 * Not really bad, but not that we want.
+	 */
 	timr->sigq->info.si_sys_private = si_private;
-	/* Send signal to the process that owns this timer.*/
 
 	timr->sigq->info.si_signo = timr->it_sigev_signo;
-	timr->sigq->info.si_errno = 0;
 	timr->sigq->info.si_code = SI_TIMER;
 	timr->sigq->info.si_tid = timr->it_id;
 	timr->sigq->info.si_value = timr->it_sigev_value;
@@ -435,6 +443,7 @@ static struct k_itimer * alloc_posix_timer(void)
 		kmem_cache_free(posix_timers_cache, tmr);
 		tmr = NULL;
 	}
+	memset(&tmr->sigq->info, 0, sizeof(siginfo_t));
 	return tmr;
 }
 
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index f011e0870b5..bbd85c60f74 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -21,6 +21,7 @@
 #include <linux/console.h>
 #include <linux/cpu.h>
 #include <linux/freezer.h>
+#include <linux/ftrace.h>
 
 #include "power.h"
 
@@ -255,7 +256,7 @@ static int create_image(int platform_mode)
 
 int hibernation_snapshot(int platform_mode)
 {
-	int error;
+	int error, ftrace_save;
 
 	/* Free memory before shutting down devices. */
 	error = swsusp_shrink_memory();
@@ -267,6 +268,7 @@ int hibernation_snapshot(int platform_mode)
 		goto Close;
 
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	error = device_suspend(PMSG_FREEZE);
 	if (error)
 		goto Recover_platform;
@@ -296,6 +298,7 @@ int hibernation_snapshot(int platform_mode)
  Resume_devices:
 	device_resume(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
  Close:
 	platform_end(platform_mode);
@@ -366,10 +369,11 @@ static int resume_target_kernel(void)
 
 int hibernation_restore(int platform_mode)
 {
-	int error;
+	int error, ftrace_save;
 
 	pm_prepare_console();
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	error = device_suspend(PMSG_QUIESCE);
 	if (error)
 		goto Finish;
@@ -384,6 +388,7 @@ int hibernation_restore(int platform_mode)
 	platform_restore_cleanup(platform_mode);
 	device_resume(PMSG_RECOVER);
  Finish:
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
 	pm_restore_console();
 	return error;
@@ -396,7 +401,7 @@ int hibernation_restore(int platform_mode)
 
 int hibernation_platform_enter(void)
 {
-	int error;
+	int error, ftrace_save;
 
 	if (!hibernation_ops)
 		return -ENOSYS;
@@ -411,6 +416,7 @@ int hibernation_platform_enter(void)
 		goto Close;
 
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	error = device_suspend(PMSG_HIBERNATE);
 	if (error) {
 		if (hibernation_ops->recover)
@@ -445,6 +451,7 @@ int hibernation_platform_enter(void)
 	hibernation_ops->finish();
  Resume_devices:
 	device_resume(PMSG_RESTORE);
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
  Close:
 	hibernation_ops->end();
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 0b7476f5d2a..540b16b6856 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -21,6 +21,7 @@
 #include <linux/freezer.h>
 #include <linux/vmstat.h>
 #include <linux/syscalls.h>
+#include <linux/ftrace.h>
 
 #include "power.h"
 
@@ -310,7 +311,7 @@ static int suspend_enter(suspend_state_t state)
  */
 int suspend_devices_and_enter(suspend_state_t state)
 {
-	int error;
+	int error, ftrace_save;
 
 	if (!suspend_ops)
 		return -ENOSYS;
@@ -321,6 +322,7 @@ int suspend_devices_and_enter(suspend_state_t state)
 			goto Close;
 	}
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	suspend_test_start();
 	error = device_suspend(PMSG_SUSPEND);
 	if (error) {
@@ -352,6 +354,7 @@ int suspend_devices_and_enter(suspend_state_t state)
 	suspend_test_start();
 	device_resume(PMSG_RESUME);
 	suspend_test_finish("resume devices");
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
  Close:
 	if (suspend_ops->end)
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index a0abf9a463f..80ccac849e4 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
-#include <linux/version.h>
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/genhd.h>
diff --git a/kernel/printk.c b/kernel/printk.c
index a7f7559c5f6..b51b1567bb5 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1309,14 +1309,14 @@ void tty_write_message(struct tty_struct *tty, char *msg)
 
 #if defined CONFIG_PRINTK
 
-DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
 /*
  * printk rate limiting, lifted from the networking subsystem.
  *
- * This enforces a rate limit: not more than one kernel message
- * every printk_ratelimit_jiffies to make a denial-of-service
- * attack impossible.
+ * This enforces a rate limit: not more than 10 kernel messages
+ * every 5s to make a denial-of-service attack impossible.
  */
+DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
+
 int printk_ratelimit(void)
 {
 	return __ratelimit(&printk_ratelimit_state);
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 082b3fcb32a..356699a96d5 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -140,7 +140,7 @@ int __ptrace_may_access(struct task_struct *task, unsigned int mode)
 	if (!dumpable && !capable(CAP_SYS_PTRACE))
 		return -EPERM;
 
-	return security_ptrace(current, task, mode);
+	return security_ptrace_may_access(task, mode);
 }
 
 bool ptrace_may_access(struct task_struct *task, unsigned int mode)
@@ -499,8 +499,7 @@ repeat:
 			goto repeat;
 		}
 
-		ret = security_ptrace(current->parent, current,
-				      PTRACE_MODE_ATTACH);
+		ret = security_ptrace_traceme(current->parent);
 
 		/*
 		 * Set the ptrace bit in the process ptrace flags.
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index f14f372cf6f..467d5940f62 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -77,6 +77,7 @@ void wakeme_after_rcu(struct rcu_head  *head)
  * sections are delimited by rcu_read_lock() and rcu_read_unlock(),
  * and may be nested.
  */
+void synchronize_rcu(void);	/* Makes kernel-doc tools happy */
 synchronize_rcu_xxx(synchronize_rcu, call_rcu)
 EXPORT_SYMBOL_GPL(synchronize_rcu);
 
diff --git a/kernel/relay.c b/kernel/relay.c
index 04006ef970b..8d13a7855c0 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -944,6 +944,10 @@ static void relay_file_read_consume(struct rchan_buf *buf,
 	size_t n_subbufs = buf->chan->n_subbufs;
 	size_t read_subbuf;
 
+	if (buf->subbufs_produced == buf->subbufs_consumed &&
+	    buf->offset == buf->bytes_consumed)
+		return;
+
 	if (buf->bytes_consumed + bytes_consumed > subbuf_size) {
 		relay_subbufs_consumed(buf->chan, buf->cpu, 1);
 		buf->bytes_consumed = 0;
@@ -975,6 +979,8 @@ static int relay_file_read_avail(struct rchan_buf *buf, size_t read_pos)
 
 	relay_file_read_consume(buf, read_pos, 0);
 
+	consumed = buf->subbufs_consumed;
+
 	if (unlikely(buf->offset > subbuf_size)) {
 		if (produced == consumed)
 			return 0;
@@ -993,8 +999,12 @@ static int relay_file_read_avail(struct rchan_buf *buf, size_t read_pos)
 	if (consumed > produced)
 		produced += n_subbufs * subbuf_size;
 
-	if (consumed == produced)
+	if (consumed == produced) {
+		if (buf->offset == subbuf_size &&
+		    buf->subbufs_produced > buf->subbufs_consumed)
+			return 1;
 		return 0;
+	}
 
 	return 1;
 }
diff --git a/kernel/resource.c b/kernel/resource.c
index 74af2d7cb5a..03d796c1b2e 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -362,35 +362,21 @@ int allocate_resource(struct resource *root, struct resource *new,
 
 EXPORT_SYMBOL(allocate_resource);
 
-/**
- * insert_resource - Inserts a resource in the resource tree
- * @parent: parent of the new resource
- * @new: new resource to insert
- *
- * Returns 0 on success, -EBUSY if the resource can't be inserted.
- *
- * This function is equivalent to request_resource when no conflict
- * happens. If a conflict happens, and the conflicting resources
- * entirely fit within the range of the new resource, then the new
- * resource is inserted and the conflicting resources become children of
- * the new resource.
+/*
+ * Insert a resource into the resource tree. If successful, return NULL,
+ * otherwise return the conflicting resource (compare to __request_resource())
  */
-int insert_resource(struct resource *parent, struct resource *new)
+static struct resource * __insert_resource(struct resource *parent, struct resource *new)
 {
-	int result;
 	struct resource *first, *next;
 
-	write_lock(&resource_lock);
-
 	for (;; parent = first) {
-	 	result = 0;
 		first = __request_resource(parent, new);
 		if (!first)
-			goto out;
+			return first;
 
-		result = -EBUSY;
 		if (first == parent)
-			goto out;
+			return first;
 
 		if ((first->start > new->start) || (first->end < new->end))
 			break;
@@ -401,15 +387,13 @@ int insert_resource(struct resource *parent, struct resource *new)
 	for (next = first; ; next = next->sibling) {
 		/* Partial overlap? Bad, and unfixable */
 		if (next->start < new->start || next->end > new->end)
-			goto out;
+			return next;
 		if (!next->sibling)
 			break;
 		if (next->sibling->start > new->end)
 			break;
 	}
 
-	result = 0;
-
 	new->parent = parent;
 	new->sibling = next->sibling;
 	new->child = first;
@@ -426,10 +410,64 @@ int insert_resource(struct resource *parent, struct resource *new)
 			next = next->sibling;
 		next->sibling = new;
 	}
+	return NULL;
+}
 
- out:
+/**
+ * insert_resource - Inserts a resource in the resource tree
+ * @parent: parent of the new resource
+ * @new: new resource to insert
+ *
+ * Returns 0 on success, -EBUSY if the resource can't be inserted.
+ *
+ * This function is equivalent to request_resource when no conflict
+ * happens. If a conflict happens, and the conflicting resources
+ * entirely fit within the range of the new resource, then the new
+ * resource is inserted and the conflicting resources become children of
+ * the new resource.
+ */
+int insert_resource(struct resource *parent, struct resource *new)
+{
+	struct resource *conflict;
+
+	write_lock(&resource_lock);
+	conflict = __insert_resource(parent, new);
+	write_unlock(&resource_lock);
+	return conflict ? -EBUSY : 0;
+}
+
+/**
+ * insert_resource_expand_to_fit - Insert a resource into the resource tree
+ * @root: root resource descriptor
+ * @new: new resource to insert
+ *
+ * Insert a resource into the resource tree, possibly expanding it in order
+ * to make it encompass any conflicting resources.
+ */
+void insert_resource_expand_to_fit(struct resource *root, struct resource *new)
+{
+	if (new->parent)
+		return;
+
+	write_lock(&resource_lock);
+	for (;;) {
+		struct resource *conflict;
+
+		conflict = __insert_resource(root, new);
+		if (!conflict)
+			break;
+		if (conflict == root)
+			break;
+
+		/* Ok, expand resource to cover the conflict, then try again .. */
+		if (conflict->start < new->start)
+			new->start = conflict->start;
+		if (conflict->end > new->end)
+			new->end = conflict->end;
+
+		printk("Expanded resource %s due to conflict with %s\n", new->name, conflict->name);
+	}
 	write_unlock(&resource_lock);
-	return result;
 }
 
 /**
@@ -490,7 +528,7 @@ resource_size_t resource_alignment(struct resource *res)
 {
 	switch (res->flags & (IORESOURCE_SIZEALIGN | IORESOURCE_STARTALIGN)) {
 	case IORESOURCE_SIZEALIGN:
-		return res->end - res->start + 1;
+		return resource_size(res);
 	case IORESOURCE_STARTALIGN:
 		return res->start;
 	default:
diff --git a/kernel/sched.c b/kernel/sched.c
index 0236958addc..98890807375 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -600,7 +600,6 @@ struct rq {
 	/* BKL stats */
 	unsigned int bkl_count;
 #endif
-	struct lock_class_key rq_lock_key;
 };
 
 static DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
@@ -809,9 +808,9 @@ const_debug unsigned int sysctl_sched_nr_migrate = 32;
 
 /*
  * ratelimit for updating the group shares.
- * default: 0.5ms
+ * default: 0.25ms
  */
-const_debug unsigned int sysctl_sched_shares_ratelimit = 500000;
+unsigned int sysctl_sched_shares_ratelimit = 250000;
 
 /*
  * period over which we measure -rt task cpu usage in us.
@@ -834,7 +833,7 @@ static inline u64 global_rt_period(void)
 
 static inline u64 global_rt_runtime(void)
 {
-	if (sysctl_sched_rt_period < 0)
+	if (sysctl_sched_rt_runtime < 0)
 		return RUNTIME_INF;
 
 	return (u64)sysctl_sched_rt_runtime * NSEC_PER_USEC;
@@ -2759,10 +2758,10 @@ static void double_rq_lock(struct rq *rq1, struct rq *rq2)
 	} else {
 		if (rq1 < rq2) {
 			spin_lock(&rq1->lock);
-			spin_lock(&rq2->lock);
+			spin_lock_nested(&rq2->lock, SINGLE_DEPTH_NESTING);
 		} else {
 			spin_lock(&rq2->lock);
-			spin_lock(&rq1->lock);
+			spin_lock_nested(&rq1->lock, SINGLE_DEPTH_NESTING);
 		}
 	}
 	update_rq_clock(rq1);
@@ -2805,14 +2804,21 @@ static int double_lock_balance(struct rq *this_rq, struct rq *busiest)
 		if (busiest < this_rq) {
 			spin_unlock(&this_rq->lock);
 			spin_lock(&busiest->lock);
-			spin_lock(&this_rq->lock);
+			spin_lock_nested(&this_rq->lock, SINGLE_DEPTH_NESTING);
 			ret = 1;
 		} else
-			spin_lock(&busiest->lock);
+			spin_lock_nested(&busiest->lock, SINGLE_DEPTH_NESTING);
 	}
 	return ret;
 }
 
+static void double_unlock_balance(struct rq *this_rq, struct rq *busiest)
+	__releases(busiest->lock)
+{
+	spin_unlock(&busiest->lock);
+	lock_set_subclass(&this_rq->lock.dep_map, 0, _RET_IP_);
+}
+
 /*
  * If dest_cpu is allowed for this process, migrate the task to it.
  * This is accomplished by forcing the cpu_allowed mask to only
@@ -3637,7 +3643,7 @@ redo:
 		ld_moved = move_tasks(this_rq, this_cpu, busiest,
 					imbalance, sd, CPU_NEWLY_IDLE,
 					&all_pinned);
-		spin_unlock(&busiest->lock);
+		double_unlock_balance(this_rq, busiest);
 
 		if (unlikely(all_pinned)) {
 			cpu_clear(cpu_of(busiest), *cpus);
@@ -3752,7 +3758,7 @@ static void active_load_balance(struct rq *busiest_rq, int busiest_cpu)
 		else
 			schedstat_inc(sd, alb_failed);
 	}
-	spin_unlock(&target_rq->lock);
+	double_unlock_balance(busiest_rq, target_rq);
 }
 
 #ifdef CONFIG_NO_HZ
@@ -4173,6 +4179,65 @@ void account_steal_time(struct task_struct *p, cputime_t steal)
 }
 
 /*
+ * Use precise platform statistics if available:
+ */
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+cputime_t task_utime(struct task_struct *p)
+{
+	return p->utime;
+}
+
+cputime_t task_stime(struct task_struct *p)
+{
+	return p->stime;
+}
+#else
+cputime_t task_utime(struct task_struct *p)
+{
+	clock_t utime = cputime_to_clock_t(p->utime),
+		total = utime + cputime_to_clock_t(p->stime);
+	u64 temp;
+
+	/*
+	 * Use CFS's precise accounting:
+	 */
+	temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
+
+	if (total) {
+		temp *= utime;
+		do_div(temp, total);
+	}
+	utime = (clock_t)temp;
+
+	p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
+	return p->prev_utime;
+}
+
+cputime_t task_stime(struct task_struct *p)
+{
+	clock_t stime;
+
+	/*
+	 * Use CFS's precise accounting. (we subtract utime from
+	 * the total, to make sure the total observed by userspace
+	 * grows monotonically - apps rely on that):
+	 */
+	stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
+			cputime_to_clock_t(task_utime(p));
+
+	if (stime >= 0)
+		p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
+
+	return p->prev_stime;
+}
+#endif
+
+inline cputime_t task_gtime(struct task_struct *p)
+{
+	return p->gtime;
+}
+
+/*
  * This function gets called by the timer code, with HZ frequency.
  * We call it with interrupts disabled.
  *
@@ -4663,6 +4728,52 @@ int __sched wait_for_completion_killable(struct completion *x)
 }
 EXPORT_SYMBOL(wait_for_completion_killable);
 
+/**
+ *	try_wait_for_completion - try to decrement a completion without blocking
+ *	@x:	completion structure
+ *
+ *	Returns: 0 if a decrement cannot be done without blocking
+ *		 1 if a decrement succeeded.
+ *
+ *	If a completion is being used as a counting completion,
+ *	attempt to decrement the counter without blocking. This
+ *	enables us to avoid waiting if the resource the completion
+ *	is protecting is not available.
+ */
+bool try_wait_for_completion(struct completion *x)
+{
+	int ret = 1;
+
+	spin_lock_irq(&x->wait.lock);
+	if (!x->done)
+		ret = 0;
+	else
+		x->done--;
+	spin_unlock_irq(&x->wait.lock);
+	return ret;
+}
+EXPORT_SYMBOL(try_wait_for_completion);
+
+/**
+ *	completion_done - Test to see if a completion has any waiters
+ *	@x:	completion structure
+ *
+ *	Returns: 0 if there are waiters (wait_for_completion() in progress)
+ *		 1 if there are no waiters.
+ *
+ */
+bool completion_done(struct completion *x)
+{
+	int ret = 1;
+
+	spin_lock_irq(&x->wait.lock);
+	if (!x->done)
+		ret = 0;
+	spin_unlock_irq(&x->wait.lock);
+	return ret;
+}
+EXPORT_SYMBOL(completion_done);
+
 static long __sched
 sleep_on_common(wait_queue_head_t *q, int state, long timeout)
 {
@@ -5004,19 +5115,21 @@ recheck:
 			return -EPERM;
 	}
 
+	if (user) {
 #ifdef CONFIG_RT_GROUP_SCHED
-	/*
-	 * Do not allow realtime tasks into groups that have no runtime
-	 * assigned.
-	 */
-	if (user
-	    && rt_policy(policy) && task_group(p)->rt_bandwidth.rt_runtime == 0)
-		return -EPERM;
+		/*
+		 * Do not allow realtime tasks into groups that have no runtime
+		 * assigned.
+		 */
+		if (rt_policy(policy) && task_group(p)->rt_bandwidth.rt_runtime == 0)
+			return -EPERM;
 #endif
 
-	retval = security_task_setscheduler(p, policy, param);
-	if (retval)
-		return retval;
+		retval = security_task_setscheduler(p, policy, param);
+		if (retval)
+			return retval;
+	}
+
 	/*
 	 * make sure no PI-waiters arrive (or leave) while we are
 	 * changing the priority of the task:
@@ -5732,6 +5845,8 @@ static inline void sched_init_granularity(void)
 		sysctl_sched_latency = limit;
 
 	sysctl_sched_wakeup_granularity *= factor;
+
+	sysctl_sched_shares_ratelimit *= factor;
 }
 
 #ifdef CONFIG_SMP
@@ -7581,24 +7696,27 @@ static int dattrs_equal(struct sched_domain_attr *cur, int idx_cur,
  * and partition_sched_domains() will fallback to the single partition
  * 'fallback_doms', it also forces the domains to be rebuilt.
  *
+ * If doms_new==NULL it will be replaced with cpu_online_map.
+ * ndoms_new==0 is a special case for destroying existing domains.
+ * It will not create the default domain.
+ *
  * Call with hotplug lock held
  */
 void partition_sched_domains(int ndoms_new, cpumask_t *doms_new,
 			     struct sched_domain_attr *dattr_new)
 {
-	int i, j;
+	int i, j, n;
 
 	mutex_lock(&sched_domains_mutex);
 
 	/* always unregister in case we don't destroy any domains */
 	unregister_sched_domain_sysctl();
 
-	if (doms_new == NULL)
-		ndoms_new = 0;
+	n = doms_new ? ndoms_new : 0;
 
 	/* Destroy deleted domains */
 	for (i = 0; i < ndoms_cur; i++) {
-		for (j = 0; j < ndoms_new; j++) {
+		for (j = 0; j < n; j++) {
 			if (cpus_equal(doms_cur[i], doms_new[j])
 			    && dattrs_equal(dattr_cur, i, dattr_new, j))
 				goto match1;
@@ -7611,7 +7729,6 @@ match1:
 
 	if (doms_new == NULL) {
 		ndoms_cur = 0;
-		ndoms_new = 1;
 		doms_new = &fallback_doms;
 		cpus_andnot(doms_new[0], cpu_online_map, cpu_isolated_map);
 		dattr_new = NULL;
@@ -7648,8 +7765,13 @@ match2:
 int arch_reinit_sched_domains(void)
 {
 	get_online_cpus();
+
+	/* Destroy domains first to force the rebuild */
+	partition_sched_domains(0, NULL, NULL);
+
 	rebuild_sched_domains();
 	put_online_cpus();
+
 	return 0;
 }
 
@@ -7671,34 +7793,34 @@ static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt)
 }
 
 #ifdef CONFIG_SCHED_MC
-static ssize_t sched_mc_power_savings_show(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *page)
+static ssize_t sched_mc_power_savings_show(struct sysdev_class *class,
+					   char *page)
 {
 	return sprintf(page, "%u\n", sched_mc_power_savings);
 }
-static ssize_t sched_mc_power_savings_store(struct sys_device *dev,
-					    struct sysdev_attribute *attr,
+static ssize_t sched_mc_power_savings_store(struct sysdev_class *class,
 					    const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 0);
 }
-static SYSDEV_ATTR(sched_mc_power_savings, 0644, sched_mc_power_savings_show,
-		   sched_mc_power_savings_store);
+static SYSDEV_CLASS_ATTR(sched_mc_power_savings, 0644,
+			 sched_mc_power_savings_show,
+			 sched_mc_power_savings_store);
 #endif
 
 #ifdef CONFIG_SCHED_SMT
-static ssize_t sched_smt_power_savings_show(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *page)
+static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev,
+					    char *page)
 {
 	return sprintf(page, "%u\n", sched_smt_power_savings);
 }
-static ssize_t sched_smt_power_savings_store(struct sys_device *dev,
-					     struct sysdev_attribute *attr,
+static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev,
 					     const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 1);
 }
-static SYSDEV_ATTR(sched_smt_power_savings, 0644, sched_smt_power_savings_show,
+static SYSDEV_CLASS_ATTR(sched_smt_power_savings, 0644,
+		   sched_smt_power_savings_show,
 		   sched_smt_power_savings_store);
 #endif
 
@@ -7733,7 +7855,7 @@ static int update_sched_domains(struct notifier_block *nfb,
 	case CPU_ONLINE_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		partition_sched_domains(0, NULL, NULL);
+		partition_sched_domains(1, NULL, NULL);
 		return NOTIFY_OK;
 
 	default:
@@ -7998,7 +8120,6 @@ void __init sched_init(void)
 
 		rq = cpu_rq(i);
 		spin_lock_init(&rq->lock);
-		lockdep_set_class(&rq->lock, &rq->rq_lock_key);
 		rq->nr_running = 0;
 		init_cfs_rq(&rq->cfs, rq);
 		init_rt_rq(&rq->rt, rq);
@@ -8455,8 +8576,8 @@ struct task_group *sched_create_group(struct task_group *parent)
 	WARN_ON(!parent); /* root should already exist */
 
 	tg->parent = parent;
-	list_add_rcu(&tg->siblings, &parent->children);
 	INIT_LIST_HEAD(&tg->children);
+	list_add_rcu(&tg->siblings, &parent->children);
 	spin_unlock_irqrestore(&task_group_lock, flags);
 
 	return tg;
@@ -8788,6 +8909,9 @@ static int sched_rt_global_constraints(void)
 	u64 rt_runtime, rt_period;
 	int ret = 0;
 
+	if (sysctl_sched_rt_period <= 0)
+		return -EINVAL;
+
 	rt_period = ktime_to_ns(tg->rt_bandwidth.rt_period);
 	rt_runtime = tg->rt_bandwidth.rt_runtime;
 
@@ -8804,6 +8928,9 @@ static int sched_rt_global_constraints(void)
 	unsigned long flags;
 	int i;
 
+	if (sysctl_sched_rt_period <= 0)
+		return -EINVAL;
+
 	spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
 	for_each_possible_cpu(i) {
 		struct rt_rq *rt_rq = &cpu_rq(i)->rt;
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 22ed55d1167..e8ab096ddfe 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -12,19 +12,17 @@
  *
  * Create a semi stable clock from a mixture of other events, including:
  *  - gtod
- *  - jiffies
  *  - sched_clock()
  *  - explicit idle events
  *
  * We use gtod as base and the unstable clock deltas. The deltas are filtered,
- * making it monotonic and keeping it within an expected window.  This window
- * is set up using jiffies.
+ * making it monotonic and keeping it within an expected window.
  *
  * Furthermore, explicit sleep and wakeup hooks allow us to account for time
  * that is otherwise invisible (TSC gets stopped).
  *
  * The clock: sched_clock_cpu() is monotonic per cpu, and should be somewhat
- * consistent between cpus (never more than 1 jiffies difference).
+ * consistent between cpus (never more than 2 jiffies difference).
  */
 #include <linux/sched.h>
 #include <linux/percpu.h>
@@ -32,13 +30,19 @@
 #include <linux/ktime.h>
 #include <linux/module.h>
 
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ * This is default implementation.
+ * Architectures and sub-architectures can override this.
+ */
+unsigned long long __attribute__((weak)) sched_clock(void)
+{
+	return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+}
 
-#ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
+static __read_mostly int sched_clock_running;
 
-#define MULTI_SHIFT 15
-/* Max is double, Min is 1/2 */
-#define MAX_MULTI (2LL << MULTI_SHIFT)
-#define MIN_MULTI (1LL << (MULTI_SHIFT-1))
+#ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
 
 struct sched_clock_data {
 	/*
@@ -48,15 +52,9 @@ struct sched_clock_data {
 	 */
 	raw_spinlock_t		lock;
 
-	unsigned long		tick_jiffies;
-	u64			prev_raw;
 	u64			tick_raw;
 	u64			tick_gtod;
 	u64			clock;
-	s64			multi;
-#ifdef CONFIG_NO_HZ
-	int			check_max;
-#endif
 };
 
 static DEFINE_PER_CPU_SHARED_ALIGNED(struct sched_clock_data, sched_clock_data);
@@ -71,121 +69,69 @@ static inline struct sched_clock_data *cpu_sdc(int cpu)
 	return &per_cpu(sched_clock_data, cpu);
 }
 
-static __read_mostly int sched_clock_running;
-
 void sched_clock_init(void)
 {
 	u64 ktime_now = ktime_to_ns(ktime_get());
-	unsigned long now_jiffies = jiffies;
 	int cpu;
 
 	for_each_possible_cpu(cpu) {
 		struct sched_clock_data *scd = cpu_sdc(cpu);
 
 		scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
-		scd->tick_jiffies = now_jiffies;
-		scd->prev_raw = 0;
 		scd->tick_raw = 0;
 		scd->tick_gtod = ktime_now;
 		scd->clock = ktime_now;
-		scd->multi = 1 << MULTI_SHIFT;
-#ifdef CONFIG_NO_HZ
-		scd->check_max = 1;
-#endif
 	}
 
 	sched_clock_running = 1;
 }
 
-#ifdef CONFIG_NO_HZ
 /*
- * The dynamic ticks makes the delta jiffies inaccurate. This
- * prevents us from checking the maximum time update.
- * Disable the maximum check during stopped ticks.
+ * min,max except they take wrapping into account
  */
-void sched_clock_tick_stop(int cpu)
-{
-	struct sched_clock_data *scd = cpu_sdc(cpu);
-
-	scd->check_max = 0;
-}
 
-void sched_clock_tick_start(int cpu)
+static inline u64 wrap_min(u64 x, u64 y)
 {
-	struct sched_clock_data *scd = cpu_sdc(cpu);
-
-	scd->check_max = 1;
+	return (s64)(x - y) < 0 ? x : y;
 }
 
-static int check_max(struct sched_clock_data *scd)
+static inline u64 wrap_max(u64 x, u64 y)
 {
-	return scd->check_max;
+	return (s64)(x - y) > 0 ? x : y;
 }
-#else
-static int check_max(struct sched_clock_data *scd)
-{
-	return 1;
-}
-#endif /* CONFIG_NO_HZ */
 
 /*
  * update the percpu scd from the raw @now value
  *
  *  - filter out backward motion
- *  - use jiffies to generate a min,max window to clip the raw values
+ *  - use the GTOD tick value to create a window to filter crazy TSC values
  */
-static void __update_sched_clock(struct sched_clock_data *scd, u64 now, u64 *time)
+static u64 __update_sched_clock(struct sched_clock_data *scd, u64 now)
 {
-	unsigned long now_jiffies = jiffies;
-	long delta_jiffies = now_jiffies - scd->tick_jiffies;
-	u64 clock = scd->clock;
-	u64 min_clock, max_clock;
-	s64 delta = now - scd->prev_raw;
+	s64 delta = now - scd->tick_raw;
+	u64 clock, min_clock, max_clock;
 
 	WARN_ON_ONCE(!irqs_disabled());
 
-	/*
-	 * At schedule tick the clock can be just under the gtod. We don't
-	 * want to push it too prematurely.
-	 */
-	min_clock = scd->tick_gtod + (delta_jiffies * TICK_NSEC);
-	if (min_clock > TICK_NSEC)
-		min_clock -= TICK_NSEC / 2;
-
-	if (unlikely(delta < 0)) {
-		clock++;
-		goto out;
-	}
+	if (unlikely(delta < 0))
+		delta = 0;
 
 	/*
-	 * The clock must stay within a jiffie of the gtod.
-	 * But since we may be at the start of a jiffy or the end of one
-	 * we add another jiffy buffer.
+	 * scd->clock = clamp(scd->tick_gtod + delta,
+	 * 		      max(scd->tick_gtod, scd->clock),
+	 * 		      scd->tick_gtod + TICK_NSEC);
 	 */
-	max_clock = scd->tick_gtod + (2 + delta_jiffies) * TICK_NSEC;
 
-	delta *= scd->multi;
-	delta >>= MULTI_SHIFT;
+	clock = scd->tick_gtod + delta;
+	min_clock = wrap_max(scd->tick_gtod, scd->clock);
+	max_clock = scd->tick_gtod + TICK_NSEC;
 
-	if (unlikely(clock + delta > max_clock) && check_max(scd)) {
-		if (clock < max_clock)
-			clock = max_clock;
-		else
-			clock++;
-	} else {
-		clock += delta;
-	}
+	clock = wrap_max(clock, min_clock);
+	clock = wrap_min(clock, max_clock);
 
- out:
-	if (unlikely(clock < min_clock))
-		clock = min_clock;
+	scd->clock = clock;
 
-	if (time)
-		*time = clock;
-	else {
-		scd->prev_raw = now;
-		scd->clock = clock;
-	}
+	return scd->clock;
 }
 
 static void lock_double_clock(struct sched_clock_data *data1,
@@ -203,7 +149,7 @@ static void lock_double_clock(struct sched_clock_data *data1,
 u64 sched_clock_cpu(int cpu)
 {
 	struct sched_clock_data *scd = cpu_sdc(cpu);
-	u64 now, clock;
+	u64 now, clock, this_clock, remote_clock;
 
 	if (unlikely(!sched_clock_running))
 		return 0ull;
@@ -212,43 +158,44 @@ u64 sched_clock_cpu(int cpu)
 	now = sched_clock();
 
 	if (cpu != raw_smp_processor_id()) {
-		/*
-		 * in order to update a remote cpu's clock based on our
-		 * unstable raw time rebase it against:
-		 *   tick_raw		(offset between raw counters)
-		 *   tick_gotd          (tick offset between cpus)
-		 */
 		struct sched_clock_data *my_scd = this_scd();
 
 		lock_double_clock(scd, my_scd);
 
-		now -= my_scd->tick_raw;
-		now += scd->tick_raw;
+		this_clock = __update_sched_clock(my_scd, now);
+		remote_clock = scd->clock;
 
-		now += my_scd->tick_gtod;
-		now -= scd->tick_gtod;
+		/*
+		 * Use the opportunity that we have both locks
+		 * taken to couple the two clocks: we take the
+		 * larger time as the latest time for both
+		 * runqueues. (this creates monotonic movement)
+		 */
+		if (likely((s64)(remote_clock - this_clock) < 0)) {
+			clock = this_clock;
+			scd->clock = clock;
+		} else {
+			/*
+			 * Should be rare, but possible:
+			 */
+			clock = remote_clock;
+			my_scd->clock = remote_clock;
+		}
 
 		__raw_spin_unlock(&my_scd->lock);
-
-		__update_sched_clock(scd, now, &clock);
-
-		__raw_spin_unlock(&scd->lock);
-
 	} else {
 		__raw_spin_lock(&scd->lock);
-		__update_sched_clock(scd, now, NULL);
-		clock = scd->clock;
-		__raw_spin_unlock(&scd->lock);
+		clock = __update_sched_clock(scd, now);
 	}
 
+	__raw_spin_unlock(&scd->lock);
+
 	return clock;
 }
 
 void sched_clock_tick(void)
 {
 	struct sched_clock_data *scd = this_scd();
-	unsigned long now_jiffies = jiffies;
-	s64 mult, delta_gtod, delta_raw;
 	u64 now, now_gtod;
 
 	if (unlikely(!sched_clock_running))
@@ -260,29 +207,9 @@ void sched_clock_tick(void)
 	now = sched_clock();
 
 	__raw_spin_lock(&scd->lock);
-	__update_sched_clock(scd, now, NULL);
-	/*
-	 * update tick_gtod after __update_sched_clock() because that will
-	 * already observe 1 new jiffy; adding a new tick_gtod to that would
-	 * increase the clock 2 jiffies.
-	 */
-	delta_gtod = now_gtod - scd->tick_gtod;
-	delta_raw = now - scd->tick_raw;
-
-	if ((long)delta_raw > 0) {
-		mult = delta_gtod << MULTI_SHIFT;
-		do_div(mult, delta_raw);
-		scd->multi = mult;
-		if (scd->multi > MAX_MULTI)
-			scd->multi = MAX_MULTI;
-		else if (scd->multi < MIN_MULTI)
-			scd->multi = MIN_MULTI;
-	} else
-		scd->multi = 1 << MULTI_SHIFT;
-
 	scd->tick_raw = now;
 	scd->tick_gtod = now_gtod;
-	scd->tick_jiffies = now_jiffies;
+	__update_sched_clock(scd, now);
 	__raw_spin_unlock(&scd->lock);
 }
 
@@ -300,37 +227,28 @@ EXPORT_SYMBOL_GPL(sched_clock_idle_sleep_event);
  */
 void sched_clock_idle_wakeup_event(u64 delta_ns)
 {
-	struct sched_clock_data *scd = this_scd();
-	u64 now = sched_clock();
-
-	/*
-	 * Override the previous timestamp and ignore all
-	 * sched_clock() deltas that occured while we idled,
-	 * and use the PM-provided delta_ns to advance the
-	 * rq clock:
-	 */
-	__raw_spin_lock(&scd->lock);
-	scd->prev_raw = now;
-	scd->clock += delta_ns;
-	scd->multi = 1 << MULTI_SHIFT;
-	__raw_spin_unlock(&scd->lock);
-
+	sched_clock_tick();
 	touch_softlockup_watchdog();
 }
 EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event);
 
-#endif
+#else /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */
 
-/*
- * Scheduler clock - returns current time in nanosec units.
- * This is default implementation.
- * Architectures and sub-architectures can override this.
- */
-unsigned long long __attribute__((weak)) sched_clock(void)
+void sched_clock_init(void)
 {
-	return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+	sched_clock_running = 1;
 }
 
+u64 sched_clock_cpu(int cpu)
+{
+	if (unlikely(!sched_clock_running))
+		return 0;
+
+	return sched_clock();
+}
+
+#endif
+
 unsigned long long cpu_clock(int cpu)
 {
 	unsigned long long clock;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index cf2cd6ce4cb..fb8994c6d4b 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -899,7 +899,7 @@ static void hrtick_start_fair(struct rq *rq, struct task_struct *p)
 		 * doesn't make sense. Rely on vruntime for fairness.
 		 */
 		if (rq->curr != p)
-			delta = max(10000LL, delta);
+			delta = max_t(s64, 10000LL, delta);
 
 		hrtick_start(rq, delta);
 	}
@@ -1442,18 +1442,23 @@ __load_balance_iterator(struct cfs_rq *cfs_rq, struct list_head *next)
 	struct task_struct *p = NULL;
 	struct sched_entity *se;
 
-	while (next != &cfs_rq->tasks) {
+	if (next == &cfs_rq->tasks)
+		return NULL;
+
+	/* Skip over entities that are not tasks */
+	do {
 		se = list_entry(next, struct sched_entity, group_node);
 		next = next->next;
+	} while (next != &cfs_rq->tasks && !entity_is_task(se));
 
-		/* Skip over entities that are not tasks */
-		if (entity_is_task(se)) {
-			p = task_of(se);
-			break;
-		}
-	}
+	if (next == &cfs_rq->tasks)
+		return NULL;
 
 	cfs_rq->balance_iterator = next;
+
+	if (entity_is_task(se))
+		p = task_of(se);
+
 	return p;
 }
 
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index 862b06bd560..9353ca78154 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -8,6 +8,6 @@ SCHED_FEAT(SYNC_WAKEUPS, 1)
 SCHED_FEAT(HRTICK, 1)
 SCHED_FEAT(DOUBLE_TICK, 0)
 SCHED_FEAT(ASYM_GRAN, 1)
-SCHED_FEAT(LB_BIAS, 0)
+SCHED_FEAT(LB_BIAS, 1)
 SCHED_FEAT(LB_WAKEUP_UPDATE, 1)
 SCHED_FEAT(ASYM_EFF_LOAD, 1)
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 908c04f9dad..1113157b205 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -199,6 +199,8 @@ static inline struct rt_rq *group_rt_rq(struct sched_rt_entity *rt_se)
 
 static inline void sched_rt_rq_enqueue(struct rt_rq *rt_rq)
 {
+	if (rt_rq->rt_nr_running)
+		resched_task(rq_of_rt_rq(rt_rq)->curr);
 }
 
 static inline void sched_rt_rq_dequeue(struct rt_rq *rt_rq)
@@ -298,7 +300,7 @@ static void __disable_runtime(struct rq *rq)
 			struct rt_rq *iter = sched_rt_period_rt_rq(rt_b, i);
 			s64 diff;
 
-			if (iter == rt_rq)
+			if (iter == rt_rq || iter->rt_runtime == RUNTIME_INF)
 				continue;
 
 			spin_lock(&iter->rt_runtime_lock);
@@ -348,6 +350,7 @@ static void __enable_runtime(struct rq *rq)
 		spin_lock(&rt_rq->rt_runtime_lock);
 		rt_rq->rt_runtime = rt_b->rt_runtime;
 		rt_rq->rt_time = 0;
+		rt_rq->rt_throttled = 0;
 		spin_unlock(&rt_rq->rt_runtime_lock);
 		spin_unlock(&rt_b->rt_runtime_lock);
 	}
@@ -438,9 +441,6 @@ static int sched_rt_runtime_exceeded(struct rt_rq *rt_rq)
 {
 	u64 runtime = sched_rt_runtime(rt_rq);
 
-	if (runtime == RUNTIME_INF)
-		return 0;
-
 	if (rt_rq->rt_throttled)
 		return rt_rq_throttled(rt_rq);
 
@@ -491,9 +491,11 @@ static void update_curr_rt(struct rq *rq)
 		rt_rq = rt_rq_of_se(rt_se);
 
 		spin_lock(&rt_rq->rt_runtime_lock);
-		rt_rq->rt_time += delta_exec;
-		if (sched_rt_runtime_exceeded(rt_rq))
-			resched_task(curr);
+		if (sched_rt_runtime(rt_rq) != RUNTIME_INF) {
+			rt_rq->rt_time += delta_exec;
+			if (sched_rt_runtime_exceeded(rt_rq))
+				resched_task(curr);
+		}
 		spin_unlock(&rt_rq->rt_runtime_lock);
 	}
 }
@@ -861,6 +863,8 @@ static void put_prev_task_rt(struct rq *rq, struct task_struct *p)
 #define RT_MAX_TRIES 3
 
 static int double_lock_balance(struct rq *this_rq, struct rq *busiest);
+static void double_unlock_balance(struct rq *this_rq, struct rq *busiest);
+
 static void deactivate_task(struct rq *rq, struct task_struct *p, int sleep);
 
 static int pick_rt_task(struct rq *rq, struct task_struct *p, int cpu)
@@ -1022,7 +1026,7 @@ static struct rq *find_lock_lowest_rq(struct task_struct *task, struct rq *rq)
 			break;
 
 		/* try again */
-		spin_unlock(&lowest_rq->lock);
+		double_unlock_balance(rq, lowest_rq);
 		lowest_rq = NULL;
 	}
 
@@ -1091,7 +1095,7 @@ static int push_rt_task(struct rq *rq)
 
 	resched_task(lowest_rq->curr);
 
-	spin_unlock(&lowest_rq->lock);
+	double_unlock_balance(rq, lowest_rq);
 
 	ret = 1;
 out:
@@ -1197,7 +1201,7 @@ static int pull_rt_task(struct rq *this_rq)
 
 		}
  skip:
-		spin_unlock(&src_rq->lock);
+		double_unlock_balance(this_rq, src_rq);
 	}
 
 	return ret;
diff --git a/kernel/semaphore.c b/kernel/semaphore.c
index aaaeae8244e..94a62c0d4ad 100644
--- a/kernel/semaphore.c
+++ b/kernel/semaphore.c
@@ -212,9 +212,7 @@ static inline int __sched __down_common(struct semaphore *sem, long state,
 	waiter.up = 0;
 
 	for (;;) {
-		if (state == TASK_INTERRUPTIBLE && signal_pending(task))
-			goto interrupted;
-		if (state == TASK_KILLABLE && fatal_signal_pending(task))
+		if (signal_pending_state(state, task))
 			goto interrupted;
 		if (timeout <= 0)
 			goto timed_out;
diff --git a/kernel/signal.c b/kernel/signal.c
index 954f77d7e3b..e661b01d340 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1304,6 +1304,7 @@ int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
 		q->info.si_overrun++;
 		goto out;
 	}
+	q->info.si_overrun = 0;
 
 	signalfd_notify(t, sig);
 	pending = group ? &t->signal->shared_pending : &t->pending;
@@ -1337,6 +1338,7 @@ int do_notify_parent(struct task_struct *tsk, int sig)
 	struct siginfo info;
 	unsigned long flags;
 	struct sighand_struct *psig;
+	int ret = sig;
 
 	BUG_ON(sig == -1);
 
@@ -1401,7 +1403,7 @@ int do_notify_parent(struct task_struct *tsk, int sig)
 		 * is implementation-defined: we do (if you don't want
 		 * it, just use SIG_IGN instead).
 		 */
-		tsk->exit_signal = -1;
+		ret = tsk->exit_signal = -1;
 		if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN)
 			sig = -1;
 	}
@@ -1410,7 +1412,7 @@ int do_notify_parent(struct task_struct *tsk, int sig)
 	__wake_up_parent(tsk, tsk->parent);
 	spin_unlock_irqrestore(&psig->siglock, flags);
 
-	return sig;
+	return ret;
 }
 
 static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
diff --git a/kernel/smp.c b/kernel/smp.c
index 96fc7c0edc5..f362a855377 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -135,7 +135,8 @@ void generic_smp_call_function_interrupt(void)
 			 */
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
-		} else
+		}
+		if (data->csd.flags & CSD_FLAG_ALLOC)
 			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();
@@ -209,8 +210,10 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 {
 	struct call_single_data d;
 	unsigned long flags;
-	/* prevent preemption and reschedule on another processor */
+	/* prevent preemption and reschedule on another processor,
+	   as well as CPU removal */
 	int me = get_cpu();
+	int err = 0;
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
@@ -219,7 +222,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 		local_irq_save(flags);
 		func(info);
 		local_irq_restore(flags);
-	} else {
+	} else if ((unsigned)cpu < NR_CPUS && cpu_online(cpu)) {
 		struct call_single_data *data = NULL;
 
 		if (!wait) {
@@ -235,10 +238,12 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 		data->func = func;
 		data->info = info;
 		generic_exec_single(cpu, data);
+	} else {
+		err = -ENXIO;	/* CPU not online */
 	}
 
 	put_cpu();
-	return 0;
+	return err;
 }
 EXPORT_SYMBOL(smp_call_function_single);
 
@@ -260,6 +265,42 @@ void __smp_call_function_single(int cpu, struct call_single_data *data)
 	generic_exec_single(cpu, data);
 }
 
+/* Dummy function */
+static void quiesce_dummy(void *unused)
+{
+}
+
+/*
+ * Ensure stack based data used in call function mask is safe to free.
+ *
+ * This is needed by smp_call_function_mask when using on-stack data, because
+ * a single call function queue is shared by all CPUs, and any CPU may pick up
+ * the data item on the queue at any time before it is deleted. So we need to
+ * ensure that all CPUs have transitioned through a quiescent state after
+ * this call.
+ *
+ * This is a very slow function, implemented by sending synchronous IPIs to
+ * all possible CPUs. For this reason, we have to alloc data rather than use
+ * stack based data even in the case of synchronous calls. The stack based
+ * data is then just used for deadlock/oom fallback which will be very rare.
+ *
+ * If a faster scheme can be made, we could go back to preferring stack based
+ * data -- the data allocation/free is non-zero cost.
+ */
+static void smp_call_function_mask_quiesce_stack(cpumask_t mask)
+{
+	struct call_single_data data;
+	int cpu;
+
+	data.func = quiesce_dummy;
+	data.info = NULL;
+
+	for_each_cpu_mask(cpu, mask) {
+		data.flags = CSD_FLAG_WAIT;
+		generic_exec_single(cpu, &data);
+	}
+}
+
 /**
  * smp_call_function_mask(): Run a function on a set of other CPUs.
  * @mask: The set of cpus to run on.
@@ -285,6 +326,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
 	cpumask_t allbutself;
 	unsigned long flags;
 	int cpu, num_cpus;
+	int slowpath = 0;
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
@@ -306,15 +348,16 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
 		return smp_call_function_single(cpu, func, info, wait);
 	}
 
-	if (!wait) {
-		data = kmalloc(sizeof(*data), GFP_ATOMIC);
-		if (data)
-			data->csd.flags = CSD_FLAG_ALLOC;
-	}
-	if (!data) {
+	data = kmalloc(sizeof(*data), GFP_ATOMIC);
+	if (data) {
+		data->csd.flags = CSD_FLAG_ALLOC;
+		if (wait)
+			data->csd.flags |= CSD_FLAG_WAIT;
+	} else {
 		data = &d;
 		data->csd.flags = CSD_FLAG_WAIT;
 		wait = 1;
+		slowpath = 1;
 	}
 
 	spin_lock_init(&data->lock);
@@ -331,8 +374,11 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
 	arch_send_call_function_ipi(mask);
 
 	/* optionally wait for the CPUs to complete */
-	if (wait)
+	if (wait) {
 		csd_flag_wait(&data->csd);
+		if (unlikely(slowpath))
+			smp_call_function_mask_quiesce_stack(mask);
+	}
 
 	return 0;
 }
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index b75b492fbfc..cb838ee93a8 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -233,7 +233,8 @@ static void check_hung_uninterruptible_tasks(int this_cpu)
 	do_each_thread(g, t) {
 		if (!--max_count)
 			goto unlock;
-		if (t->state & TASK_UNINTERRUPTIBLE)
+		/* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */
+		if (t->state == TASK_UNINTERRUPTIBLE)
 			check_hung_task(t, now);
 	} while_each_thread(g, t);
  unlock:
diff --git a/kernel/spinlock.c b/kernel/spinlock.c
index a1fb54c93cd..29ab20749dd 100644
--- a/kernel/spinlock.c
+++ b/kernel/spinlock.c
@@ -290,8 +290,8 @@ void __lockfunc _spin_lock_nested(spinlock_t *lock, int subclass)
 	spin_acquire(&lock->dep_map, subclass, 0, _RET_IP_);
 	LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
 }
-
 EXPORT_SYMBOL(_spin_lock_nested);
+
 unsigned long __lockfunc _spin_lock_irqsave_nested(spinlock_t *lock, int subclass)
 {
 	unsigned long flags;
@@ -311,9 +311,17 @@ unsigned long __lockfunc _spin_lock_irqsave_nested(spinlock_t *lock, int subclas
 #endif
 	return flags;
 }
-
 EXPORT_SYMBOL(_spin_lock_irqsave_nested);
 
+void __lockfunc _spin_lock_nest_lock(spinlock_t *lock,
+				     struct lockdep_map *nest_lock)
+{
+	preempt_disable();
+	spin_acquire_nest(&lock->dep_map, 0, 0, nest_lock, _RET_IP_);
+	LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+}
+EXPORT_SYMBOL(_spin_lock_nest_lock);
+
 #endif
 
 void __lockfunc _spin_unlock(spinlock_t *lock)
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index e446c7c7d6a..af3c7cea258 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -65,7 +65,6 @@ static void ack_state(void)
 static int stop_cpu(struct stop_machine_data *smdata)
 {
 	enum stopmachine_state curstate = STOPMACHINE_NONE;
-	int uninitialized_var(ret);
 
 	/* Simple state machine */
 	do {
diff --git a/kernel/sys.c b/kernel/sys.c
index c01858090a9..038a7bc0901 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -169,9 +169,9 @@ asmlinkage long sys_setpriority(int which, int who, int niceval)
 				pgrp = find_vpid(who);
 			else
 				pgrp = task_pgrp(current);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				error = set_one_prio(p, niceval, error);
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case PRIO_USER:
 			user = current->user;
@@ -229,11 +229,11 @@ asmlinkage long sys_getpriority(int which, int who)
 				pgrp = find_vpid(who);
 			else
 				pgrp = task_pgrp(current);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				niceval = 20 - task_nice(p);
 				if (niceval > retval)
 					retval = niceval;
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case PRIO_USER:
 			user = current->user;
@@ -274,7 +274,7 @@ void emergency_restart(void)
 }
 EXPORT_SYMBOL_GPL(emergency_restart);
 
-static void kernel_restart_prepare(char *cmd)
+void kernel_restart_prepare(char *cmd)
 {
 	blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
 	system_state = SYSTEM_RESTART;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index fe471334727..50ec0886fa3 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -159,6 +159,7 @@ static int proc_dointvec_taint(struct ctl_table *table, int write, struct file *
 static struct ctl_table root_table[];
 static struct ctl_table_root sysctl_table_root;
 static struct ctl_table_header root_table_header = {
+	.count = 1,
 	.ctl_table = root_table,
 	.ctl_entry = LIST_HEAD_INIT(sysctl_table_root.default_set.list),
 	.root = &sysctl_table_root,
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 3d1e3e1a197..f8d968063ce 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -72,6 +72,16 @@ void clockevents_set_mode(struct clock_event_device *dev,
 }
 
 /**
+ * clockevents_shutdown - shutdown the device and clear next_event
+ * @dev:	device to shutdown
+ */
+void clockevents_shutdown(struct clock_event_device *dev)
+{
+	clockevents_set_mode(dev, CLOCK_EVT_MODE_SHUTDOWN);
+	dev->next_event.tv64 = KTIME_MAX;
+}
+
+/**
  * clockevents_program_event - Reprogram the clock event device.
  * @expires:	absolute expiry time (monotonic clock)
  *
@@ -177,7 +187,7 @@ void clockevents_register_device(struct clock_event_device *dev)
 /*
  * Noop handler when we shut down an event device
  */
-static void clockevents_handle_noop(struct clock_event_device *dev)
+void clockevents_handle_noop(struct clock_event_device *dev)
 {
 }
 
@@ -199,7 +209,6 @@ void clockevents_exchange_device(struct clock_event_device *old,
 	 * released list and do a notify add later.
 	 */
 	if (old) {
-		old->event_handler = clockevents_handle_noop;
 		clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED);
 		list_del(&old->list);
 		list_add(&old->list, &clockevents_released);
@@ -207,7 +216,7 @@ void clockevents_exchange_device(struct clock_event_device *old,
 
 	if (new) {
 		BUG_ON(new->mode != CLOCK_EVT_MODE_UNUSED);
-		clockevents_set_mode(new, CLOCK_EVT_MODE_SHUTDOWN);
+		clockevents_shutdown(new);
 	}
 	local_irq_restore(flags);
 }
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 5125ddd8196..1ad46f3df6e 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -245,7 +245,7 @@ static void sync_cmos_clock(unsigned long dummy)
 	if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
 		fail = update_persistent_clock(now);
 
-	next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec;
+	next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec - (TICK_NSEC / 2);
 	if (next.tv_nsec <= 0)
 		next.tv_nsec += NSEC_PER_SEC;
 
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 31463d370b9..f1f3eee2811 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -175,6 +175,8 @@ static void tick_do_periodic_broadcast(void)
  */
 static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
 {
+	ktime_t next;
+
 	tick_do_periodic_broadcast();
 
 	/*
@@ -185,10 +187,13 @@ static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
 
 	/*
 	 * Setup the next period for devices, which do not have
-	 * periodic mode:
+	 * periodic mode. We read dev->next_event first and add to it
+	 * when the event alrady expired. clockevents_program_event()
+	 * sets dev->next_event only when the event is really
+	 * programmed to the device.
 	 */
-	for (;;) {
-		ktime_t next = ktime_add(dev->next_event, tick_period);
+	for (next = dev->next_event; ;) {
+		next = ktime_add(next, tick_period);
 
 		if (!clockevents_program_event(dev, next, ktime_get()))
 			return;
@@ -205,7 +210,7 @@ static void tick_do_broadcast_on_off(void *why)
 	struct clock_event_device *bc, *dev;
 	struct tick_device *td;
 	unsigned long flags, *reason = why;
-	int cpu;
+	int cpu, bc_stopped;
 
 	spin_lock_irqsave(&tick_broadcast_lock, flags);
 
@@ -223,14 +228,15 @@ static void tick_do_broadcast_on_off(void *why)
 	if (!tick_device_is_functional(dev))
 		goto out;
 
+	bc_stopped = cpus_empty(tick_broadcast_mask);
+
 	switch (*reason) {
 	case CLOCK_EVT_NOTIFY_BROADCAST_ON:
 	case CLOCK_EVT_NOTIFY_BROADCAST_FORCE:
 		if (!cpu_isset(cpu, tick_broadcast_mask)) {
 			cpu_set(cpu, tick_broadcast_mask);
 			if (td->mode == TICKDEV_MODE_PERIODIC)
-				clockevents_set_mode(dev,
-						     CLOCK_EVT_MODE_SHUTDOWN);
+				clockevents_shutdown(dev);
 		}
 		if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE)
 			tick_broadcast_force = 1;
@@ -245,9 +251,10 @@ static void tick_do_broadcast_on_off(void *why)
 		break;
 	}
 
-	if (cpus_empty(tick_broadcast_mask))
-		clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
-	else {
+	if (cpus_empty(tick_broadcast_mask)) {
+		if (!bc_stopped)
+			clockevents_shutdown(bc);
+	} else if (bc_stopped) {
 		if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
 			tick_broadcast_start_periodic(bc);
 		else
@@ -298,7 +305,7 @@ void tick_shutdown_broadcast(unsigned int *cpup)
 
 	if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) {
 		if (bc && cpus_empty(tick_broadcast_mask))
-			clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+			clockevents_shutdown(bc);
 	}
 
 	spin_unlock_irqrestore(&tick_broadcast_lock, flags);
@@ -313,7 +320,7 @@ void tick_suspend_broadcast(void)
 
 	bc = tick_broadcast_device.evtdev;
 	if (bc)
-		clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+		clockevents_shutdown(bc);
 
 	spin_unlock_irqrestore(&tick_broadcast_lock, flags);
 }
@@ -364,16 +371,8 @@ cpumask_t *tick_get_broadcast_oneshot_mask(void)
 static int tick_broadcast_set_event(ktime_t expires, int force)
 {
 	struct clock_event_device *bc = tick_broadcast_device.evtdev;
-	ktime_t now = ktime_get();
-	int res;
-
-	for(;;) {
-		res = clockevents_program_event(bc, expires, now);
-		if (!res || !force)
-			return res;
-		now = ktime_get();
-		expires = ktime_add(now, ktime_set(0, bc->min_delta_ns));
-	}
+
+	return tick_dev_program_event(bc, expires, force);
 }
 
 int tick_resume_broadcast_oneshot(struct clock_event_device *bc)
@@ -491,14 +490,52 @@ static void tick_broadcast_clear_oneshot(int cpu)
 	cpu_clear(cpu, tick_broadcast_oneshot_mask);
 }
 
+static void tick_broadcast_init_next_event(cpumask_t *mask, ktime_t expires)
+{
+	struct tick_device *td;
+	int cpu;
+
+	for_each_cpu_mask_nr(cpu, *mask) {
+		td = &per_cpu(tick_cpu_device, cpu);
+		if (td->evtdev)
+			td->evtdev->next_event = expires;
+	}
+}
+
 /**
  * tick_broadcast_setup_oneshot - setup the broadcast device
  */
 void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
 {
-	bc->event_handler = tick_handle_oneshot_broadcast;
-	clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
-	bc->next_event.tv64 = KTIME_MAX;
+	/* Set it up only once ! */
+	if (bc->event_handler != tick_handle_oneshot_broadcast) {
+		int was_periodic = bc->mode == CLOCK_EVT_MODE_PERIODIC;
+		int cpu = smp_processor_id();
+		cpumask_t mask;
+
+		bc->event_handler = tick_handle_oneshot_broadcast;
+		clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
+
+		/* Take the do_timer update */
+		tick_do_timer_cpu = cpu;
+
+		/*
+		 * We must be careful here. There might be other CPUs
+		 * waiting for periodic broadcast. We need to set the
+		 * oneshot_mask bits for those and program the
+		 * broadcast device to fire.
+		 */
+		mask = tick_broadcast_mask;
+		cpu_clear(cpu, mask);
+		cpus_or(tick_broadcast_oneshot_mask,
+			tick_broadcast_oneshot_mask, mask);
+
+		if (was_periodic && !cpus_empty(mask)) {
+			tick_broadcast_init_next_event(&mask, tick_next_period);
+			tick_broadcast_set_event(tick_next_period, 1);
+		} else
+			bc->next_event.tv64 = KTIME_MAX;
+	}
 }
 
 /*
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 80c4336f418..019315ebf9d 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -161,6 +161,7 @@ static void tick_setup_device(struct tick_device *td,
 	} else {
 		handler = td->evtdev->event_handler;
 		next_event = td->evtdev->next_event;
+		td->evtdev->event_handler = clockevents_handle_noop;
 	}
 
 	td->evtdev = newdev;
@@ -248,7 +249,7 @@ static int tick_check_new_device(struct clock_event_device *newdev)
 	 * not give it back to the clockevents layer !
 	 */
 	if (tick_is_broadcast_device(curdev)) {
-		clockevents_set_mode(curdev, CLOCK_EVT_MODE_SHUTDOWN);
+		clockevents_shutdown(curdev);
 		curdev = NULL;
 	}
 	clockevents_exchange_device(curdev, newdev);
@@ -310,7 +311,7 @@ static void tick_suspend(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&tick_device_lock, flags);
-	clockevents_set_mode(td->evtdev, CLOCK_EVT_MODE_SHUTDOWN);
+	clockevents_shutdown(td->evtdev);
 	spin_unlock_irqrestore(&tick_device_lock, flags);
 }
 
diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
index f13f2b7f4fd..6e9db9734aa 100644
--- a/kernel/time/tick-internal.h
+++ b/kernel/time/tick-internal.h
@@ -10,6 +10,8 @@ extern int tick_do_timer_cpu __read_mostly;
 extern void tick_setup_periodic(struct clock_event_device *dev, int broadcast);
 extern void tick_handle_periodic(struct clock_event_device *dev);
 
+extern void clockevents_shutdown(struct clock_event_device *dev);
+
 /*
  * NO_HZ / high resolution timer shared code
  */
@@ -17,6 +19,8 @@ extern void tick_handle_periodic(struct clock_event_device *dev);
 extern void tick_setup_oneshot(struct clock_event_device *newdev,
 			       void (*handler)(struct clock_event_device *),
 			       ktime_t nextevt);
+extern int tick_dev_program_event(struct clock_event_device *dev,
+				  ktime_t expires, int force);
 extern int tick_program_event(ktime_t expires, int force);
 extern void tick_oneshot_notify(void);
 extern int tick_switch_to_oneshot(void (*handler)(struct clock_event_device *));
diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c
index 450c04935b6..2e8de678e76 100644
--- a/kernel/time/tick-oneshot.c
+++ b/kernel/time/tick-oneshot.c
@@ -23,24 +23,56 @@
 #include "tick-internal.h"
 
 /**
- * tick_program_event
+ * tick_program_event internal worker function
  */
-int tick_program_event(ktime_t expires, int force)
+int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires,
+			   int force)
 {
-	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
 	ktime_t now = ktime_get();
+	int i;
 
-	while (1) {
+	for (i = 0;;) {
 		int ret = clockevents_program_event(dev, expires, now);
 
 		if (!ret || !force)
 			return ret;
+
+		/*
+		 * We tried 2 times to program the device with the given
+		 * min_delta_ns. If that's not working then we double it
+		 * and emit a warning.
+		 */
+		if (++i > 2) {
+			/* Increase the min. delta and try again */
+			if (!dev->min_delta_ns)
+				dev->min_delta_ns = 5000;
+			else
+				dev->min_delta_ns += dev->min_delta_ns >> 1;
+
+			printk(KERN_WARNING
+			       "CE: %s increasing min_delta_ns to %lu nsec\n",
+			       dev->name ? dev->name : "?",
+			       dev->min_delta_ns << 1);
+
+			i = 0;
+		}
+
 		now = ktime_get();
-		expires = ktime_add(now, ktime_set(0, dev->min_delta_ns));
+		expires = ktime_add_ns(now, dev->min_delta_ns);
 	}
 }
 
 /**
+ * tick_program_event
+ */
+int tick_program_event(ktime_t expires, int force)
+{
+	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
+
+	return tick_dev_program_event(dev, expires, force);
+}
+
+/**
  * tick_resume_onshot - resume oneshot mode
  */
 void tick_resume_oneshot(void)
@@ -61,7 +93,7 @@ void tick_setup_oneshot(struct clock_event_device *newdev,
 {
 	newdev->event_handler = handler;
 	clockevents_set_mode(newdev, CLOCK_EVT_MODE_ONESHOT);
-	clockevents_program_event(newdev, next_event, ktime_get());
+	tick_dev_program_event(newdev, next_event, 1);
 }
 
 /**
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 825b4c00fe4..a87b0468568 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -162,6 +162,8 @@ void tick_nohz_stop_idle(int cpu)
 		ts->idle_lastupdate = now;
 		ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
 		ts->idle_active = 0;
+
+		sched_clock_idle_wakeup_event(0);
 	}
 }
 
@@ -177,6 +179,7 @@ static ktime_t tick_nohz_start_idle(struct tick_sched *ts)
 	}
 	ts->idle_entrytime = now;
 	ts->idle_active = 1;
+	sched_clock_idle_sleep_event();
 	return now;
 }
 
@@ -289,7 +292,6 @@ void tick_nohz_stop_sched_tick(int inidle)
 			ts->tick_stopped = 1;
 			ts->idle_jiffies = last_jiffies;
 			rcu_enter_nohz();
-			sched_clock_tick_stop(cpu);
 		}
 
 		/*
@@ -392,7 +394,6 @@ void tick_nohz_restart_sched_tick(void)
 	select_nohz_load_balancer(0);
 	now = ktime_get();
 	tick_do_update_jiffies64(now);
-	sched_clock_tick_start(cpu);
 	cpu_clear(cpu, nohz_cpu_mask);
 
 	/*
@@ -645,17 +646,21 @@ void tick_setup_sched_timer(void)
 		ts->nohz_mode = NOHZ_MODE_HIGHRES;
 #endif
 }
+#endif /* HIGH_RES_TIMERS */
 
+#if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
 void tick_cancel_sched_timer(int cpu)
 {
 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
 
+# ifdef CONFIG_HIGH_RES_TIMERS
 	if (ts->sched_timer.base)
 		hrtimer_cancel(&ts->sched_timer);
+# endif
 
 	ts->nohz_mode = NOHZ_MODE_INACTIVE;
 }
-#endif /* HIGH_RES_TIMERS */
+#endif
 
 /**
  * Async notification about clocksource changes
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index a9ab0596de4..532858fa5b8 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/nsproxy.h>
 #include <linux/slab.h>
 #include <linux/user_namespace.h>
diff --git a/kernel/utsname.c b/kernel/utsname.c
index 64d398f1244..815237a55af 100644
--- a/kernel/utsname.c
+++ b/kernel/utsname.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/uts.h>
 #include <linux/utsname.h>
-#include <linux/version.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 
diff --git a/kernel/utsname_sysctl.c b/kernel/utsname_sysctl.c
index fe3a56c2256..4ab9659d269 100644
--- a/kernel/utsname_sysctl.c
+++ b/kernel/utsname_sysctl.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/uts.h>
 #include <linux/utsname.h>
-#include <linux/version.h>
 #include <linux/sysctl.h>
 
 static void *get_uts(ctl_table *table, int write)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index ec7e4f62aaf..4048e92aa04 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -290,11 +290,11 @@ static void run_workqueue(struct cpu_workqueue_struct *cwq)
 
 		BUG_ON(get_wq_data(work) != cwq);
 		work_clear_pending(work);
-		lock_acquire(&cwq->wq->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
-		lock_acquire(&lockdep_map, 0, 0, 0, 2, _THIS_IP_);
+		lock_map_acquire(&cwq->wq->lockdep_map);
+		lock_map_acquire(&lockdep_map);
 		f(work);
-		lock_release(&lockdep_map, 1, _THIS_IP_);
-		lock_release(&cwq->wq->lockdep_map, 1, _THIS_IP_);
+		lock_map_release(&lockdep_map);
+		lock_map_release(&cwq->wq->lockdep_map);
 
 		if (unlikely(in_atomic() || lockdep_depth(current) > 0)) {
 			printk(KERN_ERR "BUG: workqueue leaked lock or atomic: "
@@ -413,8 +413,8 @@ void flush_workqueue(struct workqueue_struct *wq)
 	int cpu;
 
 	might_sleep();
-	lock_acquire(&wq->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
-	lock_release(&wq->lockdep_map, 1, _THIS_IP_);
+	lock_map_acquire(&wq->lockdep_map);
+	lock_map_release(&wq->lockdep_map);
 	for_each_cpu_mask_nr(cpu, *cpu_map)
 		flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, cpu));
 }
@@ -441,8 +441,8 @@ int flush_work(struct work_struct *work)
 	if (!cwq)
 		return 0;
 
-	lock_acquire(&cwq->wq->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
-	lock_release(&cwq->wq->lockdep_map, 1, _THIS_IP_);
+	lock_map_acquire(&cwq->wq->lockdep_map);
+	lock_map_release(&cwq->wq->lockdep_map);
 
 	prev = NULL;
 	spin_lock_irq(&cwq->lock);
@@ -536,8 +536,8 @@ static void wait_on_work(struct work_struct *work)
 
 	might_sleep();
 
-	lock_acquire(&work->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
-	lock_release(&work->lockdep_map, 1, _THIS_IP_);
+	lock_map_acquire(&work->lockdep_map);
+	lock_map_release(&work->lockdep_map);
 
 	cwq = get_wq_data(work);
 	if (!cwq)
@@ -830,10 +830,21 @@ struct workqueue_struct *__create_workqueue_key(const char *name,
 		start_workqueue_thread(cwq, -1);
 	} else {
 		cpu_maps_update_begin();
+		/*
+		 * We must place this wq on list even if the code below fails.
+		 * cpu_down(cpu) can remove cpu from cpu_populated_map before
+		 * destroy_workqueue() takes the lock, in that case we leak
+		 * cwq[cpu]->thread.
+		 */
 		spin_lock(&workqueue_lock);
 		list_add(&wq->list, &workqueues);
 		spin_unlock(&workqueue_lock);
-
+		/*
+		 * We must initialize cwqs for each possible cpu even if we
+		 * are going to call destroy_workqueue() finally. Otherwise
+		 * cpu_up() can hit the uninitialized cwq once we drop the
+		 * lock.
+		 */
 		for_each_possible_cpu(cpu) {
 			cwq = init_cpu_workqueue(wq, cpu);
 			if (err || !cpu_online(cpu))
@@ -861,8 +872,8 @@ static void cleanup_workqueue_thread(struct cpu_workqueue_struct *cwq)
 	if (cwq->thread == NULL)
 		return;
 
-	lock_acquire(&cwq->wq->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
-	lock_release(&cwq->wq->lockdep_map, 1, _THIS_IP_);
+	lock_map_acquire(&cwq->wq->lockdep_map);
+	lock_map_release(&cwq->wq->lockdep_map);
 
 	flush_cpu_workqueue(cwq);
 	/*
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e1d4764435e..0b504814e37 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -394,7 +394,7 @@ config LOCKDEP
 	bool
 	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select STACKTRACE
-	select FRAME_POINTER if !X86 && !MIPS
+	select FRAME_POINTER if !X86 && !MIPS && !PPC
 	select KALLSYMS
 	select KALLSYMS_ALL
 
@@ -676,13 +676,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER
 	depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
 	depends on !X86_64
 	select STACKTRACE
-	select FRAME_POINTER
+	select FRAME_POINTER if !PPC
 	help
 	  Provide stacktrace filter for fault-injection capabilities
 
 config LATENCYTOP
 	bool "Latency measuring infrastructure"
-	select FRAME_POINTER if !MIPS
+	select FRAME_POINTER if !MIPS && !PPC
 	select KALLSYMS
 	select KALLSYMS_ALL
 	select STACKTRACE
@@ -693,6 +693,14 @@ config LATENCYTOP
 	  Enable this option if you want to use the LatencyTOP tool
 	  to find out which userspace is blocking on what kernel operations.
 
+config SYSCTL_SYSCALL_CHECK
+	bool "Sysctl checks"
+	depends on SYSCTL_SYSCALL
+	---help---
+	  sys_sysctl uses binary paths that have been found challenging
+	  to properly maintain and use. This enables checks that help
+	  you to keep things correct.
+
 source kernel/trace/Kconfig
 
 config PROVIDE_OHCI1394_DMA_INIT
@@ -735,6 +743,15 @@ config FIREWIRE_OHCI_REMOTE_DMA
 
 	  If unsure, say N.
 
+menuconfig BUILD_DOCSRC
+	bool "Build targets in Documentation/ tree"
+	depends on HEADERS_CHECK
+	help
+	  This option attempts to build objects from the source files in the
+	  kernel Documentation/ tree.
+
+	  Say N if you are unsure.
+
 source "samples/Kconfig"
 
 source "lib/Kconfig.kgdb"
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index 2cfd2721f7e..9b5d1d7f2ef 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -4,14 +4,17 @@ config HAVE_ARCH_KGDB
 
 menuconfig KGDB
 	bool "KGDB: kernel debugging with remote gdb"
-	select FRAME_POINTER
 	depends on HAVE_ARCH_KGDB
 	depends on DEBUG_KERNEL && EXPERIMENTAL
 	help
 	  If you say Y here, it will be possible to remotely debug the
-	  kernel using gdb.  Documentation of kernel debugger is available
-	  at http://kgdb.sourceforge.net as well as in DocBook form
-	  in Documentation/DocBook/.  If unsure, say N.
+	  kernel using gdb.  It is recommended but not required, that
+	  you also turn on the kernel config option
+	  CONFIG_FRAME_POINTER to aid in producing more reliable stack
+	  backtraces in the external debugger.  Documentation of
+	  kernel debugger is available at http://kgdb.sourceforge.net
+	  as well as in DocBook form in Documentation/DocBook/.  If
+	  unsure, say N.
 
 if KGDB
 
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 482df94ea21..06fb57c86de 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -316,6 +316,17 @@ int bitmap_scnprintf(char *buf, unsigned int buflen,
 EXPORT_SYMBOL(bitmap_scnprintf);
 
 /**
+ * bitmap_scnprintf_len - return buffer length needed to convert
+ * bitmap to an ASCII hex string
+ * @nr_bits: number of bits to be converted
+ */
+int bitmap_scnprintf_len(unsigned int nr_bits)
+{
+	unsigned int nr_nibbles = ALIGN(nr_bits, 4) / 4;
+	return nr_nibbles + ALIGN(nr_nibbles, CHUNKSZ / 4) / (CHUNKSZ / 4) - 1;
+}
+
+/**
  * __bitmap_parse - convert an ASCII hex string into a bitmap.
  * @buf: pointer to buffer containing string.
  * @buflen: buffer size in bytes.  If string is smaller than this
diff --git a/lib/debug_locks.c b/lib/debug_locks.c
index 0ef01d14727..0218b4693dd 100644
--- a/lib/debug_locks.c
+++ b/lib/debug_locks.c
@@ -8,6 +8,7 @@
  *
  *  Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  */
+#include <linux/kernel.h>
 #include <linux/rwsem.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
@@ -37,6 +38,7 @@ int debug_locks_off(void)
 {
 	if (xchg(&debug_locks, 0)) {
 		if (!debug_locks_silent) {
+			oops_in_progress = 1;
 			console_verbose();
 			return 1;
 		}
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index 45a6bde762d..e3ab374e133 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -112,6 +112,7 @@ static struct debug_obj *lookup_object(void *addr, struct debug_bucket *b)
 
 /*
  * Allocate a new object. If the pool is empty, switch off the debugger.
+ * Must be called with interrupts disabled.
  */
 static struct debug_obj *
 alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr)
@@ -148,17 +149,18 @@ alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr)
 static void free_object(struct debug_obj *obj)
 {
 	unsigned long idx = (unsigned long)(obj - obj_static_pool);
+	unsigned long flags;
 
 	if (obj_pool_free < ODEBUG_POOL_SIZE || idx < ODEBUG_POOL_SIZE) {
-		spin_lock(&pool_lock);
+		spin_lock_irqsave(&pool_lock, flags);
 		hlist_add_head(&obj->node, &obj_pool);
 		obj_pool_free++;
 		obj_pool_used--;
-		spin_unlock(&pool_lock);
+		spin_unlock_irqrestore(&pool_lock, flags);
 	} else {
-		spin_lock(&pool_lock);
+		spin_lock_irqsave(&pool_lock, flags);
 		obj_pool_used--;
-		spin_unlock(&pool_lock);
+		spin_unlock_irqrestore(&pool_lock, flags);
 		kmem_cache_free(obj_cache, obj);
 	}
 }
@@ -171,6 +173,7 @@ static void debug_objects_oom(void)
 {
 	struct debug_bucket *db = obj_hash;
 	struct hlist_node *node, *tmp;
+	HLIST_HEAD(freelist);
 	struct debug_obj *obj;
 	unsigned long flags;
 	int i;
@@ -179,11 +182,14 @@ static void debug_objects_oom(void)
 
 	for (i = 0; i < ODEBUG_HASH_SIZE; i++, db++) {
 		spin_lock_irqsave(&db->lock, flags);
-		hlist_for_each_entry_safe(obj, node, tmp, &db->list, node) {
+		hlist_move_list(&db->list, &freelist);
+		spin_unlock_irqrestore(&db->lock, flags);
+
+		/* Now free them */
+		hlist_for_each_entry_safe(obj, node, tmp, &freelist, node) {
 			hlist_del(&obj->node);
 			free_object(obj);
 		}
-		spin_unlock_irqrestore(&db->lock, flags);
 	}
 }
 
@@ -498,8 +504,9 @@ void debug_object_free(void *addr, struct debug_obj_descr *descr)
 		return;
 	default:
 		hlist_del(&obj->node);
+		spin_unlock_irqrestore(&db->lock, flags);
 		free_object(obj);
-		break;
+		return;
 	}
 out_unlock:
 	spin_unlock_irqrestore(&db->lock, flags);
@@ -510,6 +517,7 @@ static void __debug_check_no_obj_freed(const void *address, unsigned long size)
 {
 	unsigned long flags, oaddr, saddr, eaddr, paddr, chunks;
 	struct hlist_node *node, *tmp;
+	HLIST_HEAD(freelist);
 	struct debug_obj_descr *descr;
 	enum debug_obj_state state;
 	struct debug_bucket *db;
@@ -545,11 +553,18 @@ repeat:
 				goto repeat;
 			default:
 				hlist_del(&obj->node);
-				free_object(obj);
+				hlist_add_head(&obj->node, &freelist);
 				break;
 			}
 		}
 		spin_unlock_irqrestore(&db->lock, flags);
+
+		/* Now free them */
+		hlist_for_each_entry_safe(obj, node, tmp, &freelist, node) {
+			hlist_del(&obj->node);
+			free_object(obj);
+		}
+
 		if (cnt > debug_objects_maxchain)
 			debug_objects_maxchain = cnt;
 	}
diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c
index 889ddce2021..a3b8d4c3f77 100644
--- a/lib/iommu-helper.c
+++ b/lib/iommu-helper.c
@@ -80,11 +80,3 @@ void iommu_area_free(unsigned long *map, unsigned long start, unsigned int nr)
 	}
 }
 EXPORT_SYMBOL(iommu_area_free);
-
-unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
-{
-	unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
-
-	return size >> PAGE_SHIFT;
-}
-EXPORT_SYMBOL(iommu_num_pages);
diff --git a/lib/kobject.c b/lib/kobject.c
index bd732ffebc8..fbf0ae28237 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -223,8 +223,7 @@ static int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
 		return -ENOMEM;
 
 	/* ewww... some of these buggers have '/' in the name ... */
-	s = strchr(kobj->name, '/');
-	if (s)
+	while ((s = strchr(kobj->name, '/')))
 		s[0] = '!';
 
 	kfree(old_name);
diff --git a/lib/lmb.c b/lib/lmb.c
index 5d7b9286503..97e54703708 100644
--- a/lib/lmb.c
+++ b/lib/lmb.c
@@ -462,6 +462,8 @@ void __init lmb_enforce_memory_limit(u64 memory_limit)
 	if (lmb.memory.region[0].size < lmb.rmo_size)
 		lmb.rmo_size = lmb.memory.region[0].size;
 
+	memory_limit = lmb_end_of_DRAM();
+
 	/* And truncate any reserves above the limit also. */
 	for (i = 0; i < lmb.reserved.cnt; i++) {
 		p = &lmb.reserved.region[i];
diff --git a/lib/random32.c b/lib/random32.c
index ca87d86992b..217d5c4b666 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -56,23 +56,12 @@ static u32 __random32(struct rnd_state *state)
 	return (state->s1 ^ state->s2 ^ state->s3);
 }
 
-static void __set_random32(struct rnd_state *state, unsigned long s)
+/*
+ * Handle minimum values for seeds
+ */
+static inline u32 __seed(u32 x, u32 m)
 {
-	if (s == 0)
-		s = 1;      /* default seed is 1 */
-
-#define LCG(n) (69069 * n)
-	state->s1 = LCG(s);
-	state->s2 = LCG(state->s1);
-	state->s3 = LCG(state->s2);
-
-	/* "warm it up" */
-	__random32(state);
-	__random32(state);
-	__random32(state);
-	__random32(state);
-	__random32(state);
-	__random32(state);
+	return (x < m) ? x + m : x;
 }
 
 /**
@@ -107,7 +96,7 @@ void srandom32(u32 entropy)
 	 */
 	for_each_possible_cpu (i) {
 		struct rnd_state *state = &per_cpu(net_rand_state, i);
-		__set_random32(state, state->s1 ^ entropy);
+		state->s1 = __seed(state->s1 ^ entropy, 1);
 	}
 }
 EXPORT_SYMBOL(srandom32);
@@ -122,7 +111,19 @@ static int __init random32_init(void)
 
 	for_each_possible_cpu(i) {
 		struct rnd_state *state = &per_cpu(net_rand_state,i);
-		__set_random32(state, i + jiffies);
+
+#define LCG(x)	((x) * 69069)	/* super-duper LCG */
+		state->s1 = __seed(LCG(i + jiffies), 1);
+		state->s2 = __seed(LCG(state->s1), 7);
+		state->s3 = __seed(LCG(state->s2), 15);
+
+		/* "warm it up" */
+		__random32(state);
+		__random32(state);
+		__random32(state);
+		__random32(state);
+		__random32(state);
+		__random32(state);
 	}
 	return 0;
 }
@@ -135,13 +136,18 @@ core_initcall(random32_init);
 static int __init random32_reseed(void)
 {
 	int i;
-	unsigned long seed;
 
 	for_each_possible_cpu(i) {
 		struct rnd_state *state = &per_cpu(net_rand_state,i);
+		u32 seeds[3];
+
+		get_random_bytes(&seeds, sizeof(seeds));
+		state->s1 = __seed(seeds[0], 1);
+		state->s2 = __seed(seeds[1], 7);
+		state->s3 = __seed(seeds[2], 15);
 
-		get_random_bytes(&seed, sizeof(seed));
-		__set_random32(state, seed);
+		/* mix it in */
+		__random32(state);
 	}
 	return 0;
 }
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index 876ba6d5b67..8d2688ff135 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -422,9 +422,12 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 {
 	unsigned int offset = 0;
 	struct sg_mapping_iter miter;
+	unsigned long flags;
 
 	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
 
+	local_irq_save(flags);
+
 	while (sg_miter_next(&miter) && offset < buflen) {
 		unsigned int len;
 
@@ -442,6 +445,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 	sg_miter_stop(&miter);
 
+	local_irq_restore(flags);
 	return offset;
 }
 
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 977edbdbc1d..8826fdf0f18 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -491,7 +491,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		 * the lowest available address range.
 		 */
 		dma_addr_t handle;
-		handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
+		handle = swiotlb_map_single(hwdev, NULL, size, DMA_FROM_DEVICE);
 		if (swiotlb_dma_mapping_error(hwdev, handle))
 			return NULL;
 
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 1dc2d1d18fa..c399bc1093c 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -27,6 +27,7 @@
 
 #include <asm/page.h>		/* for PAGE_SIZE */
 #include <asm/div64.h>
+#include <asm/sections.h>	/* for dereference_function_descriptor() */
 
 /* Works only for digits and letters, but small and fast */
 #define TOLOWER(x) ((x) | 0x20)
@@ -220,7 +221,7 @@ int strict_strtou##type(const char *cp, unsigned int base, valtype *res)\
 	if (len == 0)							\
 		return -EINVAL;						\
 									\
-	val = simple_strtoul(cp, &tail, base);				\
+	val = simple_strtou##type(cp, &tail, base);			\
 	if ((*tail == '\0') ||						\
 		((len == (size_t)(tail - cp) + 1) && (*tail == '\n'))) {\
 		*res = val;						\
@@ -513,16 +514,6 @@ static char *string(char *buf, char *end, char *s, int field_width, int precisio
 	return buf;
 }
 
-static inline void *dereference_function_descriptor(void *ptr)
-{
-#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
-	void *p;
-	if (!probe_kernel_address(ptr, p))
-		ptr = p;
-#endif
-	return ptr;
-}
-
 static char *symbol_string(char *buf, char *end, void *ptr, int field_width, int precision, int flags)
 {
 	unsigned long value = (unsigned long) ptr;
diff --git a/mm/Kconfig b/mm/Kconfig
index 446c6588c75..0bd9c2dbb2a 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -77,9 +77,6 @@ config FLAT_NODE_MEM_MAP
 	def_bool y
 	depends on !SPARSEMEM
 
-config HAVE_GET_USER_PAGES_FAST
-	bool
-
 #
 # Both the NUMA code and DISCONTIGMEM use arrays of pg_data_t's
 # to represent different areas of memory.  This variable allows
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 4af15d0340a..ad8eec6e44a 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -405,6 +405,29 @@ int __init reserve_bootmem(unsigned long addr, unsigned long size,
 }
 #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
 
+static unsigned long align_idx(struct bootmem_data *bdata, unsigned long idx,
+			unsigned long step)
+{
+	unsigned long base = bdata->node_min_pfn;
+
+	/*
+	 * Align the index with respect to the node start so that the
+	 * combination of both satisfies the requested alignment.
+	 */
+
+	return ALIGN(base + idx, step) - base;
+}
+
+static unsigned long align_off(struct bootmem_data *bdata, unsigned long off,
+			unsigned long align)
+{
+	unsigned long base = PFN_PHYS(bdata->node_min_pfn);
+
+	/* Same as align_idx for byte offsets */
+
+	return ALIGN(base + off, align) - base;
+}
+
 static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 				unsigned long size, unsigned long align,
 				unsigned long goal, unsigned long limit)
@@ -441,7 +464,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 	else
 		start = ALIGN(min, step);
 
-	sidx = start - bdata->node_min_pfn;;
+	sidx = start - bdata->node_min_pfn;
 	midx = max - bdata->node_min_pfn;
 
 	if (bdata->hint_idx > sidx) {
@@ -450,7 +473,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 		 * catch the fallback below.
 		 */
 		fallback = sidx + 1;
-		sidx = ALIGN(bdata->hint_idx, step);
+		sidx = align_idx(bdata, bdata->hint_idx, step);
 	}
 
 	while (1) {
@@ -459,7 +482,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 		unsigned long eidx, i, start_off, end_off;
 find_block:
 		sidx = find_next_zero_bit(bdata->node_bootmem_map, midx, sidx);
-		sidx = ALIGN(sidx, step);
+		sidx = align_idx(bdata, sidx, step);
 		eidx = sidx + PFN_UP(size);
 
 		if (sidx >= midx || eidx > midx)
@@ -467,15 +490,15 @@ find_block:
 
 		for (i = sidx; i < eidx; i++)
 			if (test_bit(i, bdata->node_bootmem_map)) {
-				sidx = ALIGN(i, step);
+				sidx = align_idx(bdata, i, step);
 				if (sidx == i)
 					sidx += step;
 				goto find_block;
 			}
 
-		if (bdata->last_end_off &&
+		if (bdata->last_end_off & (PAGE_SIZE - 1) &&
 				PFN_DOWN(bdata->last_end_off) + 1 == sidx)
-			start_off = ALIGN(bdata->last_end_off, align);
+			start_off = align_off(bdata, bdata->last_end_off, align);
 		else
 			start_off = PFN_PHYS(sidx);
 
@@ -499,7 +522,7 @@ find_block:
 	}
 
 	if (fallback) {
-		sidx = ALIGN(fallback - 1, step);
+		sidx = align_idx(bdata, fallback - 1, step);
 		fallback = 0;
 		goto find_block;
 	}
diff --git a/mm/filemap.c b/mm/filemap.c
index 42bbc6909ba..876bc595d0f 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -558,14 +558,14 @@ EXPORT_SYMBOL(wait_on_page_bit);
  * But that's OK - sleepers in wait_on_page_writeback() just go back to sleep.
  *
  * The first mb is necessary to safely close the critical section opened by the
- * TestSetPageLocked(), the second mb is necessary to enforce ordering between
- * the clear_bit and the read of the waitqueue (to avoid SMP races with a
- * parallel wait_on_page_locked()).
+ * test_and_set_bit() to lock the page; the second mb is necessary to enforce
+ * ordering between the clear_bit and the read of the waitqueue (to avoid SMP
+ * races with a parallel wait_on_page_locked()).
  */
 void unlock_page(struct page *page)
 {
 	smp_mb__before_clear_bit();
-	if (!TestClearPageLocked(page))
+	if (!test_and_clear_bit(PG_locked, &page->flags))
 		BUG();
 	smp_mb__after_clear_bit(); 
 	wake_up_page(page, PG_locked);
@@ -931,7 +931,7 @@ grab_cache_page_nowait(struct address_space *mapping, pgoff_t index)
 	struct page *page = find_get_page(mapping, index);
 
 	if (page) {
-		if (!TestSetPageLocked(page))
+		if (trylock_page(page))
 			return page;
 		page_cache_release(page);
 		return NULL;
@@ -1027,7 +1027,7 @@ find_page:
 			if (inode->i_blkbits == PAGE_CACHE_SHIFT ||
 					!mapping->a_ops->is_partially_uptodate)
 				goto page_not_up_to_date;
-			if (TestSetPageLocked(page))
+			if (!trylock_page(page))
 				goto page_not_up_to_date;
 			if (!mapping->a_ops->is_partially_uptodate(page,
 								desc, offset))
@@ -1879,7 +1879,7 @@ void iov_iter_advance(struct iov_iter *i, size_t bytes)
 		 * The !iov->iov_len check ensures we skip over unlikely
 		 * zero-length segments (without overruning the iovec).
 		 */
-		while (bytes || unlikely(!iov->iov_len && i->count)) {
+		while (bytes || unlikely(i->count && !iov->iov_len)) {
 			int copy;
 
 			copy = min(bytes, iov->iov_len - base);
@@ -2129,13 +2129,20 @@ generic_file_direct_write(struct kiocb *iocb, const struct iovec *iov,
 	 * After a write we want buffered reads to be sure to go to disk to get
 	 * the new data.  We invalidate clean cached page from the region we're
 	 * about to write.  We do this *before* the write so that we can return
-	 * -EIO without clobbering -EIOCBQUEUED from ->direct_IO().
+	 * without clobbering -EIOCBQUEUED from ->direct_IO().
 	 */
 	if (mapping->nrpages) {
 		written = invalidate_inode_pages2_range(mapping,
 					pos >> PAGE_CACHE_SHIFT, end);
-		if (written)
+		/*
+		 * If a page can not be invalidated, return 0 to fall back
+		 * to buffered write.
+		 */
+		if (written) {
+			if (written == -EBUSY)
+				return 0;
 			goto out;
+		}
 	}
 
 	written = mapping->a_ops->direct_IO(WRITE, iocb, iov, pos, *nr_segs);
diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 380ab402d71..b5167dfb2f2 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -15,6 +15,8 @@
 #include <linux/rmap.h>
 #include <linux/mmu_notifier.h>
 #include <linux/sched.h>
+#include <linux/seqlock.h>
+#include <linux/mutex.h>
 #include <asm/tlbflush.h>
 #include <asm/io.h>
 
@@ -22,22 +24,18 @@
  * We do use our own empty page to avoid interference with other users
  * of ZERO_PAGE(), such as /dev/zero
  */
+static DEFINE_MUTEX(xip_sparse_mutex);
+static seqcount_t xip_sparse_seq = SEQCNT_ZERO;
 static struct page *__xip_sparse_page;
 
+/* called under xip_sparse_mutex */
 static struct page *xip_sparse_page(void)
 {
 	if (!__xip_sparse_page) {
 		struct page *page = alloc_page(GFP_HIGHUSER | __GFP_ZERO);
 
-		if (page) {
-			static DEFINE_SPINLOCK(xip_alloc_lock);
-			spin_lock(&xip_alloc_lock);
-			if (!__xip_sparse_page)
-				__xip_sparse_page = page;
-			else
-				__free_page(page);
-			spin_unlock(&xip_alloc_lock);
-		}
+		if (page)
+			__xip_sparse_page = page;
 	}
 	return __xip_sparse_page;
 }
@@ -174,18 +172,23 @@ __xip_unmap (struct address_space * mapping,
 	pte_t pteval;
 	spinlock_t *ptl;
 	struct page *page;
+	unsigned count;
+	int locked = 0;
+
+	count = read_seqcount_begin(&xip_sparse_seq);
 
 	page = __xip_sparse_page;
 	if (!page)
 		return;
 
+retry:
 	spin_lock(&mapping->i_mmap_lock);
 	vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
 		mm = vma->vm_mm;
 		address = vma->vm_start +
 			((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
 		BUG_ON(address < vma->vm_start || address >= vma->vm_end);
-		pte = page_check_address(page, mm, address, &ptl);
+		pte = page_check_address(page, mm, address, &ptl, 1);
 		if (pte) {
 			/* Nuke the page table entry. */
 			flush_cache_page(vma, address, pte_pfn(*pte));
@@ -198,6 +201,14 @@ __xip_unmap (struct address_space * mapping,
 		}
 	}
 	spin_unlock(&mapping->i_mmap_lock);
+
+	if (locked) {
+		mutex_unlock(&xip_sparse_mutex);
+	} else if (read_seqcount_retry(&xip_sparse_seq, count)) {
+		mutex_lock(&xip_sparse_mutex);
+		locked = 1;
+		goto retry;
+	}
 }
 
 /*
@@ -218,7 +229,7 @@ static int xip_file_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	int error;
 
 	/* XXX: are VM_FAULT_ codes OK? */
-
+again:
 	size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 	if (vmf->pgoff >= size)
 		return VM_FAULT_SIGBUS;
@@ -237,8 +248,10 @@ static int xip_file_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 		int err;
 
 		/* maybe shared writable, allocate new block */
+		mutex_lock(&xip_sparse_mutex);
 		error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 1,
 							&xip_mem, &xip_pfn);
+		mutex_unlock(&xip_sparse_mutex);
 		if (error)
 			return VM_FAULT_SIGBUS;
 		/* unmap sparse mappings at pgoff from all other vmas */
@@ -252,14 +265,34 @@ found:
 		BUG_ON(err);
 		return VM_FAULT_NOPAGE;
 	} else {
+		int err, ret = VM_FAULT_OOM;
+
+		mutex_lock(&xip_sparse_mutex);
+		write_seqcount_begin(&xip_sparse_seq);
+		error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 0,
+							&xip_mem, &xip_pfn);
+		if (unlikely(!error)) {
+			write_seqcount_end(&xip_sparse_seq);
+			mutex_unlock(&xip_sparse_mutex);
+			goto again;
+		}
+		if (error != -ENODATA)
+			goto out;
 		/* not shared and writable, use xip_sparse_page() */
 		page = xip_sparse_page();
 		if (!page)
-			return VM_FAULT_OOM;
+			goto out;
+		err = vm_insert_page(vma, (unsigned long)vmf->virtual_address,
+							page);
+		if (err == -ENOMEM)
+			goto out;
 
-		page_cache_get(page);
-		vmf->page = page;
-		return 0;
+		ret = VM_FAULT_NOPAGE;
+out:
+		write_seqcount_end(&xip_sparse_seq);
+		mutex_unlock(&xip_sparse_mutex);
+
+		return ret;
 	}
 }
 
@@ -308,8 +341,10 @@ __xip_file_write(struct file *filp, const char __user *buf,
 						&xip_mem, &xip_pfn);
 		if (status == -ENODATA) {
 			/* we allocate a new page unmap it */
+			mutex_lock(&xip_sparse_mutex);
 			status = a_ops->get_xip_mem(mapping, index, 1,
 							&xip_mem, &xip_pfn);
+			mutex_unlock(&xip_sparse_mutex);
 			if (!status)
 				/* unmap page at pgoff from all other vmas */
 				__xip_unmap(mapping, index);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 254ce2b9015..67a71191136 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -565,7 +565,7 @@ static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
 		huge_page_order(h));
 	if (page) {
 		if (arch_prepare_hugepage(page)) {
-			__free_pages(page, HUGETLB_PAGE_ORDER);
+			__free_pages(page, huge_page_order(h));
 			return NULL;
 		}
 		prep_new_huge_page(h, page, nid);
@@ -665,6 +665,11 @@ static struct page *alloc_buddy_huge_page(struct hstate *h,
 					__GFP_REPEAT|__GFP_NOWARN,
 					huge_page_order(h));
 
+	if (page && arch_prepare_hugepage(page)) {
+		__free_pages(page, huge_page_order(h));
+		return NULL;
+	}
+
 	spin_lock(&hugetlb_lock);
 	if (page) {
 		/*
@@ -1283,7 +1288,12 @@ module_exit(hugetlb_exit);
 
 static int __init hugetlb_init(void)
 {
-	BUILD_BUG_ON(HPAGE_SHIFT == 0);
+	/* Some platform decide whether they support huge pages at boot
+	 * time. On these, such as powerpc, HPAGE_SHIFT is set to 0 when
+	 * there is no such support
+	 */
+	if (HPAGE_SHIFT == 0)
+		return 0;
 
 	if (!size_to_hstate(default_hstate_size)) {
 		default_hstate_size = HPAGE_SIZE;
@@ -1932,6 +1942,18 @@ retry:
 			lock_page(page);
 	}
 
+	/*
+	 * If we are going to COW a private mapping later, we examine the
+	 * pending reservations for this page now. This will ensure that
+	 * any allocations necessary to record that reservation occur outside
+	 * the spinlock.
+	 */
+	if (write_access && !(vma->vm_flags & VM_SHARED))
+		if (vma_needs_reservation(h, vma, address) < 0) {
+			ret = VM_FAULT_OOM;
+			goto backout_unlocked;
+		}
+
 	spin_lock(&mm->page_table_lock);
 	size = i_size_read(mapping->host) >> huge_page_shift(h);
 	if (idx >= size)
@@ -1957,6 +1979,7 @@ out:
 
 backout:
 	spin_unlock(&mm->page_table_lock);
+backout_unlocked:
 	unlock_page(page);
 	put_page(page);
 	goto out;
@@ -1968,6 +1991,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	pte_t *ptep;
 	pte_t entry;
 	int ret;
+	struct page *pagecache_page = NULL;
 	static DEFINE_MUTEX(hugetlb_instantiation_mutex);
 	struct hstate *h = hstate_vma(vma);
 
@@ -1984,25 +2008,44 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	entry = huge_ptep_get(ptep);
 	if (huge_pte_none(entry)) {
 		ret = hugetlb_no_page(mm, vma, address, ptep, write_access);
-		mutex_unlock(&hugetlb_instantiation_mutex);
-		return ret;
+		goto out_unlock;
 	}
 
 	ret = 0;
 
+	/*
+	 * If we are going to COW the mapping later, we examine the pending
+	 * reservations for this page now. This will ensure that any
+	 * allocations necessary to record that reservation occur outside the
+	 * spinlock. For private mappings, we also lookup the pagecache
+	 * page now as it is used to determine if a reservation has been
+	 * consumed.
+	 */
+	if (write_access && !pte_write(entry)) {
+		if (vma_needs_reservation(h, vma, address) < 0) {
+			ret = VM_FAULT_OOM;
+			goto out_unlock;
+		}
+
+		if (!(vma->vm_flags & VM_SHARED))
+			pagecache_page = hugetlbfs_pagecache_page(h,
+								vma, address);
+	}
+
 	spin_lock(&mm->page_table_lock);
 	/* Check for a racing update before calling hugetlb_cow */
 	if (likely(pte_same(entry, huge_ptep_get(ptep))))
-		if (write_access && !pte_write(entry)) {
-			struct page *page;
-			page = hugetlbfs_pagecache_page(h, vma, address);
-			ret = hugetlb_cow(mm, vma, address, ptep, entry, page);
-			if (page) {
-				unlock_page(page);
-				put_page(page);
-			}
-		}
+		if (write_access && !pte_write(entry))
+			ret = hugetlb_cow(mm, vma, address, ptep, entry,
+							pagecache_page);
 	spin_unlock(&mm->page_table_lock);
+
+	if (pagecache_page) {
+		unlock_page(pagecache_page);
+		put_page(pagecache_page);
+	}
+
+out_unlock:
 	mutex_unlock(&hugetlb_instantiation_mutex);
 
 	return ret;
diff --git a/mm/madvise.c b/mm/madvise.c
index 23a0ec3e0ea..f9349c18a1b 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -132,10 +132,10 @@ static long madvise_willneed(struct vm_area_struct * vma,
  * Application no longer needs these pages.  If the pages are dirty,
  * it's OK to just throw them away.  The app will be more careful about
  * data it wants to keep.  Be sure to free swap resources too.  The
- * zap_page_range call sets things up for refill_inactive to actually free
+ * zap_page_range call sets things up for shrink_active_list to actually free
  * these pages later if no one else has touched them in the meantime,
  * although we could add these pages to a global reuse list for
- * refill_inactive to pick up before reclaiming other pages.
+ * shrink_active_list to pick up before reclaiming other pages.
  *
  * NB: This interface discards data rather than pushes it out to swap,
  * as some implementations do.  This has performance implications for
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index fba566c5132..0f1f7a7374b 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -796,6 +796,8 @@ int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask)
 
 	if (mem_cgroup_subsys.disabled)
 		return 0;
+	if (!mm)
+		return 0;
 
 	rcu_read_lock();
 	mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
@@ -1168,9 +1170,6 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss,
 	mem = mem_cgroup_from_cont(cont);
 	old_mem = mem_cgroup_from_cont(old_cont);
 
-	if (mem == old_mem)
-		goto out;
-
 	/*
 	 * Only thread group leaders are allowed to migrate, the mm_struct is
 	 * in effect owned by the leader
diff --git a/mm/memory.c b/mm/memory.c
index 67f0ab9077d..1002f473f49 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -994,6 +994,29 @@ unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
 	return end;
 }
 
+/**
+ * zap_vma_ptes - remove ptes mapping the vma
+ * @vma: vm_area_struct holding ptes to be zapped
+ * @address: starting address of pages to zap
+ * @size: number of bytes to zap
+ *
+ * This function only unmaps ptes assigned to VM_PFNMAP vmas.
+ *
+ * The entire address range must be fully contained within the vma.
+ *
+ * Returns 0 if successful.
+ */
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+		unsigned long size)
+{
+	if (address < vma->vm_start || address + size > vma->vm_end ||
+	    		!(vma->vm_flags & VM_PFNMAP))
+		return -1;
+	zap_page_range(vma, address, size, NULL);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(zap_vma_ptes);
+
 /*
  * Do a quick page-table lookup for a single page.
  */
@@ -1766,7 +1789,7 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	 * not dirty accountable.
 	 */
 	if (PageAnon(old_page)) {
-		if (!TestSetPageLocked(old_page)) {
+		if (trylock_page(old_page)) {
 			reuse = can_share_swap_page(old_page);
 			unlock_page(old_page);
 		}
@@ -2742,16 +2765,26 @@ int make_pages_present(unsigned long addr, unsigned long end)
 
 	vma = find_vma(current->mm, addr);
 	if (!vma)
-		return -1;
+		return -ENOMEM;
 	write = (vma->vm_flags & VM_WRITE) != 0;
 	BUG_ON(addr >= end);
 	BUG_ON(end > vma->vm_end);
 	len = DIV_ROUND_UP(end, PAGE_SIZE) - addr/PAGE_SIZE;
 	ret = get_user_pages(current, current->mm, addr,
 			len, write, 0, NULL, NULL);
-	if (ret < 0)
+	if (ret < 0) {
+		/*
+		   SUS require strange return value to mlock
+		    - invalid addr generate to ENOMEM.
+		    - out of memory should generate EAGAIN.
+		*/
+		if (ret == -EFAULT)
+			ret = -ENOMEM;
+		else if (ret == -ENOMEM)
+			ret = -EAGAIN;
 		return ret;
-	return ret == len ? 0 : -1;
+	}
+	return ret == len ? 0 : -ENOMEM;
 }
 
 #if !defined(__HAVE_ARCH_GATE_AREA)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index e550bec2058..83369058ec1 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -803,7 +803,6 @@ static int migrate_to_node(struct mm_struct *mm, int source, int dest,
 int do_migrate_pages(struct mm_struct *mm,
 	const nodemask_t *from_nodes, const nodemask_t *to_nodes, int flags)
 {
-	LIST_HEAD(pagelist);
 	int busy = 0;
 	int err = 0;
 	nodemask_t tmp;
diff --git a/mm/migrate.c b/mm/migrate.c
index 153572fb60b..2a80136b23b 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -605,7 +605,7 @@ static int move_to_new_page(struct page *newpage, struct page *page)
 	 * establishing additional references. We are the only one
 	 * holding a reference to the new page at this point.
 	 */
-	if (TestSetPageLocked(newpage))
+	if (!trylock_page(newpage))
 		BUG();
 
 	/* Prepare mapping for the new page.*/
@@ -667,7 +667,7 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private,
 	BUG_ON(charge);
 
 	rc = -EAGAIN;
-	if (TestSetPageLocked(page)) {
+	if (!trylock_page(page)) {
 		if (!force)
 			goto move_newpage;
 		lock_page(page);
diff --git a/mm/mlock.c b/mm/mlock.c
index 7b2656055d6..01fbe93eff5 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -78,8 +78,6 @@ success:
 
 	mm->locked_vm -= pages;
 out:
-	if (ret == -ENOMEM)
-		ret = -EAGAIN;
 	return ret;
 }
 
diff --git a/mm/mm_init.c b/mm/mm_init.c
index c6af41ea999..4e0e26591df 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -12,7 +12,11 @@
 #include "internal.h"
 
 #ifdef CONFIG_DEBUG_MEMORY_INIT
-int __meminitdata mminit_loglevel;
+int mminit_loglevel;
+
+#ifndef SECTIONS_SHIFT
+#define SECTIONS_SHIFT	0
+#endif
 
 /* The zonelists are simply reported, validation is manual. */
 void mminit_verify_zonelist(void)
@@ -74,11 +78,7 @@ void __init mminit_verify_pageflags_layout(void)
 		NR_PAGEFLAGS);
 	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_shifts",
 		"Section %d Node %d Zone %d\n",
-#ifdef SECTIONS_SHIFT
 		SECTIONS_SHIFT,
-#else
-		0,
-#endif
 		NODES_SHIFT,
 		ZONES_SHIFT);
 	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_offsets",
diff --git a/mm/mmap.c b/mm/mmap.c
index 245c3d69067..e7a5a68a9c2 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -370,7 +370,7 @@ find_vma_prepare(struct mm_struct *mm, unsigned long addr,
 		if (vma_tmp->vm_end > addr) {
 			vma = vma_tmp;
 			if (vma_tmp->vm_start <= addr)
-				return vma;
+				break;
 			__rb_link = &__rb_parent->rb_left;
 		} else {
 			rb_prev = __rb_parent;
@@ -1030,6 +1030,10 @@ unsigned long do_mmap_pgoff(struct file * file, unsigned long addr,
 	} else {
 		switch (flags & MAP_TYPE) {
 		case MAP_SHARED:
+			/*
+			 * Ignore pgoff.
+			 */
+			pgoff = 0;
 			vm_flags |= VM_SHARED | VM_MAYSHARE;
 			break;
 		case MAP_PRIVATE:
@@ -2273,14 +2277,14 @@ int install_special_mapping(struct mm_struct *mm,
 
 static DEFINE_MUTEX(mm_all_locks_mutex);
 
-static void vm_lock_anon_vma(struct anon_vma *anon_vma)
+static void vm_lock_anon_vma(struct mm_struct *mm, struct anon_vma *anon_vma)
 {
 	if (!test_bit(0, (unsigned long *) &anon_vma->head.next)) {
 		/*
 		 * The LSB of head.next can't change from under us
 		 * because we hold the mm_all_locks_mutex.
 		 */
-		spin_lock(&anon_vma->lock);
+		spin_lock_nest_lock(&anon_vma->lock, &mm->mmap_sem);
 		/*
 		 * We can safely modify head.next after taking the
 		 * anon_vma->lock. If some other vma in this mm shares
@@ -2296,7 +2300,7 @@ static void vm_lock_anon_vma(struct anon_vma *anon_vma)
 	}
 }
 
-static void vm_lock_mapping(struct address_space *mapping)
+static void vm_lock_mapping(struct mm_struct *mm, struct address_space *mapping)
 {
 	if (!test_bit(AS_MM_ALL_LOCKS, &mapping->flags)) {
 		/*
@@ -2310,7 +2314,7 @@ static void vm_lock_mapping(struct address_space *mapping)
 		 */
 		if (test_and_set_bit(AS_MM_ALL_LOCKS, &mapping->flags))
 			BUG();
-		spin_lock(&mapping->i_mmap_lock);
+		spin_lock_nest_lock(&mapping->i_mmap_lock, &mm->mmap_sem);
 	}
 }
 
@@ -2358,11 +2362,17 @@ int mm_take_all_locks(struct mm_struct *mm)
 	for (vma = mm->mmap; vma; vma = vma->vm_next) {
 		if (signal_pending(current))
 			goto out_unlock;
-		if (vma->anon_vma)
-			vm_lock_anon_vma(vma->anon_vma);
 		if (vma->vm_file && vma->vm_file->f_mapping)
-			vm_lock_mapping(vma->vm_file->f_mapping);
+			vm_lock_mapping(mm, vma->vm_file->f_mapping);
 	}
+
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		if (signal_pending(current))
+			goto out_unlock;
+		if (vma->anon_vma)
+			vm_lock_anon_vma(mm, vma->anon_vma);
+	}
+
 	ret = 0;
 
 out_unlock:
diff --git a/mm/mmzone.c b/mm/mmzone.c
index 486ed595ee6..16ce8b955dc 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -69,6 +69,6 @@ struct zoneref *next_zones_zonelist(struct zoneref *z,
 				(z->zone && !zref_in_nodemask(z, nodes)))
 			z++;
 
-	*zone = zonelist_zone(z++);
+	*zone = zonelist_zone(z);
 	return z;
 }
diff --git a/mm/nommu.c b/mm/nommu.c
index 5edccd9c921..ed75bc962fb 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -266,6 +266,27 @@ void *vmalloc_node(unsigned long size, int node)
 }
 EXPORT_SYMBOL(vmalloc_node);
 
+#ifndef PAGE_KERNEL_EXEC
+# define PAGE_KERNEL_EXEC PAGE_KERNEL
+#endif
+
+/**
+ *	vmalloc_exec  -  allocate virtually contiguous, executable memory
+ *	@size:		allocation size
+ *
+ *	Kernel-internal function to allocate enough pages to cover @size
+ *	the page level allocator and map them into contiguous and
+ *	executable kernel virtual space.
+ *
+ *	For tight control over page level allocator and protection flags
+ *	use __vmalloc() instead.
+ */
+
+void *vmalloc_exec(unsigned long size)
+{
+	return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC);
+}
+
 /**
  * vmalloc_32  -  allocate virtually contiguous memory (32bit addressable)
  *	@size:		allocation size
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 8a5467ee626..64e5b4bcd96 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/notifier.h>
 #include <linux/memcontrol.h>
+#include <linux/security.h>
 
 int sysctl_panic_on_oom;
 int sysctl_oom_kill_allocating_task;
@@ -128,7 +129,8 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 	 * Superuser processes are usually more important, so we make it
 	 * less likely that we kill those.
 	 */
-	if (__capable(p, CAP_SYS_ADMIN) || __capable(p, CAP_SYS_RESOURCE))
+	if (has_capability(p, CAP_SYS_ADMIN) ||
+	    has_capability(p, CAP_SYS_RESOURCE))
 		points /= 4;
 
 	/*
@@ -137,7 +139,7 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 	 * tend to only have this flag set on applications they think
 	 * of as important.
 	 */
-	if (__capable(p, CAP_SYS_RAWIO))
+	if (has_capability(p, CAP_SYS_RAWIO))
 		points /= 4;
 
 	/*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 3cf3d05b6bd..e293c58bea5 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -694,6 +694,9 @@ static int move_freepages(struct zone *zone,
 #endif
 
 	for (page = start_page; page <= end_page;) {
+		/* Make sure we are not inadvertently changing nodes */
+		VM_BUG_ON(page_to_nid(page) != zone_to_nid(zone));
+
 		if (!pfn_valid_within(page_to_pfn(page))) {
 			page++;
 			continue;
@@ -2516,6 +2519,10 @@ static void setup_zone_migrate_reserve(struct zone *zone)
 			continue;
 		page = pfn_to_page(pfn);
 
+		/* Watch out for overlapping nodes */
+		if (page_to_nid(page) != zone_to_nid(zone))
+			continue;
+
 		/* Blocks with reserved pages will never free, skip them. */
 		if (PageReserved(page))
 			continue;
@@ -3753,23 +3760,6 @@ unsigned long __init find_min_pfn_with_active_regions(void)
 	return find_min_pfn_for_node(MAX_NUMNODES);
 }
 
-/**
- * find_max_pfn_with_active_regions - Find the maximum PFN registered
- *
- * It returns the maximum PFN based on information provided via
- * add_active_range().
- */
-unsigned long __init find_max_pfn_with_active_regions(void)
-{
-	int i;
-	unsigned long max_pfn = 0;
-
-	for (i = 0; i < nr_nodemap_entries; i++)
-		max_pfn = max(max_pfn, early_node_map[i].end_pfn);
-
-	return max_pfn;
-}
-
 /*
  * early_calculate_totalpages()
  * Sum pages in active regions for movable zone.
@@ -4081,7 +4071,7 @@ void __init set_dma_reserve(unsigned long new_dma_reserve)
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-struct pglist_data contig_page_data = { .bdata = &bootmem_node_data[0] };
+struct pglist_data __refdata contig_page_data = { .bdata = &bootmem_node_data[0] };
 EXPORT_SYMBOL(contig_page_data);
 #endif
 
@@ -4454,7 +4444,7 @@ void *__init alloc_large_system_hash(const char *tablename,
 	do {
 		size = bucketsize << log2qty;
 		if (flags & HASH_EARLY)
-			table = alloc_bootmem(size);
+			table = alloc_bootmem_nopanic(size);
 		else if (hashdist)
 			table = __vmalloc(size, GFP_ATOMIC, PAGE_KERNEL);
 		else {
diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index 3444b58033c..c69f84fe038 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -2,7 +2,6 @@
  * linux/mm/page_isolation.c
  */
 
-#include <stddef.h>
 #include <linux/mm.h>
 #include <linux/page-isolation.h>
 #include <linux/pageblock-flags.h>
diff --git a/mm/quicklist.c b/mm/quicklist.c
index 3f703f7cb39..8dbb6805ef3 100644
--- a/mm/quicklist.c
+++ b/mm/quicklist.c
@@ -26,7 +26,10 @@ DEFINE_PER_CPU(struct quicklist, quicklist)[CONFIG_NR_QUICK];
 static unsigned long max_pages(unsigned long min_pages)
 {
 	unsigned long node_free_pages, max;
-	struct zone *zones = NODE_DATA(numa_node_id())->node_zones;
+	int node = numa_node_id();
+	struct zone *zones = NODE_DATA(node)->node_zones;
+	int num_cpus_on_node;
+	node_to_cpumask_ptr(cpumask_on_node, node);
 
 	node_free_pages =
 #ifdef CONFIG_ZONE_DMA
@@ -38,6 +41,10 @@ static unsigned long max_pages(unsigned long min_pages)
 		zone_page_state(&zones[ZONE_NORMAL], NR_FREE_PAGES);
 
 	max = node_free_pages / FRACTION_OF_NODE_MEM;
+
+	num_cpus_on_node = cpus_weight_nr(*cpumask_on_node);
+	max /= num_cpus_on_node;
+
 	return max(max, min_pages);
 }
 
diff --git a/mm/rmap.c b/mm/rmap.c
index 99bc3f9cd79..0383acfcb06 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -224,10 +224,14 @@ unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
 /*
  * Check that @page is mapped at @address into @mm.
  *
+ * If @sync is false, page_check_address may perform a racy check to avoid
+ * the page table lock when the pte is not present (helpful when reclaiming
+ * highly shared pages).
+ *
  * On success returns with pte mapped and locked.
  */
 pte_t *page_check_address(struct page *page, struct mm_struct *mm,
-			  unsigned long address, spinlock_t **ptlp)
+			  unsigned long address, spinlock_t **ptlp, int sync)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -249,7 +253,7 @@ pte_t *page_check_address(struct page *page, struct mm_struct *mm,
 
 	pte = pte_offset_map(pmd, address);
 	/* Make a quick check before getting the lock */
-	if (!pte_present(*pte)) {
+	if (!sync && !pte_present(*pte)) {
 		pte_unmap(pte);
 		return NULL;
 	}
@@ -281,7 +285,7 @@ static int page_referenced_one(struct page *page,
 	if (address == -EFAULT)
 		goto out;
 
-	pte = page_check_address(page, mm, address, &ptl);
+	pte = page_check_address(page, mm, address, &ptl, 0);
 	if (!pte)
 		goto out;
 
@@ -422,7 +426,7 @@ int page_referenced(struct page *page, int is_locked,
 			referenced += page_referenced_anon(page, mem_cont);
 		else if (is_locked)
 			referenced += page_referenced_file(page, mem_cont);
-		else if (TestSetPageLocked(page))
+		else if (!trylock_page(page))
 			referenced++;
 		else {
 			if (page->mapping)
@@ -450,7 +454,7 @@ static int page_mkclean_one(struct page *page, struct vm_area_struct *vma)
 	if (address == -EFAULT)
 		goto out;
 
-	pte = page_check_address(page, mm, address, &ptl);
+	pte = page_check_address(page, mm, address, &ptl, 1);
 	if (!pte)
 		goto out;
 
@@ -659,6 +663,22 @@ void page_remove_rmap(struct page *page, struct vm_area_struct *vma)
 		}
 
 		/*
+		 * Now that the last pte has gone, s390 must transfer dirty
+		 * flag from storage key to struct page.  We can usually skip
+		 * this if the page is anon, so about to be freed; but perhaps
+		 * not if it's in swapcache - there might be another pte slot
+		 * containing the swap entry, but page not yet written to swap.
+		 */
+		if ((!PageAnon(page) || PageSwapCache(page)) &&
+		    page_test_dirty(page)) {
+			page_clear_dirty(page);
+			set_page_dirty(page);
+		}
+
+		mem_cgroup_uncharge_page(page);
+		__dec_zone_page_state(page,
+			PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
+		/*
 		 * It would be tidy to reset the PageAnon mapping here,
 		 * but that might overwrite a racing page_add_anon_rmap
 		 * which increments mapcount after us but sets mapping
@@ -667,14 +687,6 @@ void page_remove_rmap(struct page *page, struct vm_area_struct *vma)
 		 * Leaving it set also helps swapoff to reinstate ptes
 		 * faster for those pages still in swapcache.
 		 */
-		if (page_test_dirty(page)) {
-			page_clear_dirty(page);
-			set_page_dirty(page);
-		}
-		mem_cgroup_uncharge_page(page);
-
-		__dec_zone_page_state(page,
-				PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
 	}
 }
 
@@ -696,7 +708,7 @@ static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
 	if (address == -EFAULT)
 		goto out;
 
-	pte = page_check_address(page, mm, address, &ptl);
+	pte = page_check_address(page, mm, address, &ptl, 0);
 	if (!pte)
 		goto out;
 
diff --git a/mm/shmem.c b/mm/shmem.c
index c1e5a3b4f75..04fb4f1ab88 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1265,7 +1265,7 @@ repeat:
 		}
 
 		/* We have to do this with page locked to prevent races */
-		if (TestSetPageLocked(swappage)) {
+		if (!trylock_page(swappage)) {
 			shmem_swp_unmap(entry);
 			spin_unlock(&info->lock);
 			wait_on_page_locked(swappage);
@@ -1329,7 +1329,7 @@ repeat:
 		shmem_swp_unmap(entry);
 		filepage = find_get_page(mapping, idx);
 		if (filepage &&
-		    (!PageUptodate(filepage) || TestSetPageLocked(filepage))) {
+		    (!PageUptodate(filepage) || !trylock_page(filepage))) {
 			spin_unlock(&info->lock);
 			wait_on_page_locked(filepage);
 			page_cache_release(filepage);
diff --git a/mm/slab.c b/mm/slab.c
index 918f04f7fef..e76eee46688 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -4472,4 +4472,3 @@ size_t ksize(const void *objp)
 
 	return obj_size(virt_to_cache(objp));
 }
-EXPORT_SYMBOL(ksize);
diff --git a/mm/slob.c b/mm/slob.c
index d8fbd4d1bfa..4c82dd41f32 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -519,7 +519,6 @@ size_t ksize(const void *block)
 	else
 		return sp->page.private;
 }
-EXPORT_SYMBOL(ksize);
 
 struct kmem_cache {
 	unsigned int size, align;
diff --git a/mm/slub.c b/mm/slub.c
index b7e2cd5d82d..0c83e6afe7b 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1329,7 +1329,7 @@ static struct page *get_any_partial(struct kmem_cache *s, gfp_t flags)
 		n = get_node(s, zone_to_nid(zone));
 
 		if (n && cpuset_zone_allowed_hardwall(zone, flags) &&
-				n->nr_partial > MIN_PARTIAL) {
+				n->nr_partial > n->min_partial) {
 			page = get_partial_node(n);
 			if (page)
 				return page;
@@ -1381,7 +1381,7 @@ static void unfreeze_slab(struct kmem_cache *s, struct page *page, int tail)
 		slab_unlock(page);
 	} else {
 		stat(c, DEACTIVATE_EMPTY);
-		if (n->nr_partial < MIN_PARTIAL) {
+		if (n->nr_partial < n->min_partial) {
 			/*
 			 * Adding an empty slab to the partial slabs in order
 			 * to avoid page allocator overhead. This slab needs
@@ -1913,13 +1913,26 @@ static void init_kmem_cache_cpu(struct kmem_cache *s,
 #endif
 }
 
-static void init_kmem_cache_node(struct kmem_cache_node *n)
+static void
+init_kmem_cache_node(struct kmem_cache_node *n, struct kmem_cache *s)
 {
 	n->nr_partial = 0;
+
+	/*
+	 * The larger the object size is, the more pages we want on the partial
+	 * list to avoid pounding the page allocator excessively.
+	 */
+	n->min_partial = ilog2(s->size);
+	if (n->min_partial < MIN_PARTIAL)
+		n->min_partial = MIN_PARTIAL;
+	else if (n->min_partial > MAX_PARTIAL)
+		n->min_partial = MAX_PARTIAL;
+
 	spin_lock_init(&n->list_lock);
 	INIT_LIST_HEAD(&n->partial);
 #ifdef CONFIG_SLUB_DEBUG
 	atomic_long_set(&n->nr_slabs, 0);
+	atomic_long_set(&n->total_objects, 0);
 	INIT_LIST_HEAD(&n->full);
 #endif
 }
@@ -2087,7 +2100,7 @@ static struct kmem_cache_node *early_kmem_cache_node_alloc(gfp_t gfpflags,
 	init_object(kmalloc_caches, n, 1);
 	init_tracking(kmalloc_caches, n);
 #endif
-	init_kmem_cache_node(n);
+	init_kmem_cache_node(n, kmalloc_caches);
 	inc_slabs_node(kmalloc_caches, node, page->objects);
 
 	/*
@@ -2144,7 +2157,7 @@ static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags)
 
 		}
 		s->node[node] = n;
-		init_kmem_cache_node(n);
+		init_kmem_cache_node(n, s);
 	}
 	return 1;
 }
@@ -2155,7 +2168,7 @@ static void free_kmem_cache_nodes(struct kmem_cache *s)
 
 static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags)
 {
-	init_kmem_cache_node(&s->local_node);
+	init_kmem_cache_node(&s->local_node, s);
 	return 1;
 }
 #endif
@@ -2300,7 +2313,7 @@ static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 
 	s->refcount = 1;
 #ifdef CONFIG_NUMA
-	s->remote_node_defrag_ratio = 100;
+	s->remote_node_defrag_ratio = 1000;
 #endif
 	if (!init_kmem_cache_nodes(s, gfpflags & ~SLUB_DMA))
 		goto error;
@@ -2715,7 +2728,6 @@ size_t ksize(const void *object)
 	 */
 	return s->size;
 }
-EXPORT_SYMBOL(ksize);
 
 void kfree(const void *x)
 {
@@ -2890,7 +2902,7 @@ static int slab_mem_going_online_callback(void *arg)
 			ret = -ENOMEM;
 			goto out;
 		}
-		init_kmem_cache_node(n);
+		init_kmem_cache_node(n, s);
 		s->node[nid] = n;
 	}
 out:
@@ -4047,7 +4059,7 @@ static ssize_t remote_node_defrag_ratio_store(struct kmem_cache *s,
 	if (err)
 		return err;
 
-	if (ratio < 100)
+	if (ratio <= 100)
 		s->remote_node_defrag_ratio = ratio * 10;
 
 	return length;
diff --git a/mm/sparse.c b/mm/sparse.c
index 5d9dbbb9d39..39db301b920 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -12,7 +12,6 @@
 #include <asm/dma.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
-#include "internal.h"
 
 /*
  * Permanent SPARSEMEM data:
diff --git a/mm/swap.c b/mm/swap.c
index dd89234ee51..9e0cb311807 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -278,9 +278,10 @@ int lru_add_drain_all(void)
  * Avoid taking zone->lru_lock if possible, but if it is taken, retain it
  * for the remainder of the operation.
  *
- * The locking in this function is against shrink_cache(): we recheck the
- * page count inside the lock to see whether shrink_cache grabbed the page
- * via the LRU.  If it did, give up: shrink_cache will free it.
+ * The locking in this function is against shrink_inactive_list(): we recheck
+ * the page count inside the lock to see whether shrink_inactive_list()
+ * grabbed the page via the LRU.  If it did, give up: shrink_inactive_list()
+ * will free it.
  */
 void release_pages(struct page **pages, int nr, int cold)
 {
@@ -443,7 +444,7 @@ void pagevec_strip(struct pagevec *pvec)
 	for (i = 0; i < pagevec_count(pvec); i++) {
 		struct page *page = pvec->pages[i];
 
-		if (PagePrivate(page) && !TestSetPageLocked(page)) {
+		if (PagePrivate(page) && trylock_page(page)) {
 			if (PagePrivate(page))
 				try_to_release_page(page, 0);
 			unlock_page(page);
diff --git a/mm/swap_state.c b/mm/swap_state.c
index b8035b05512..797c3831cbe 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -60,7 +60,7 @@ void show_swap_cache_info(void)
 	printk("Swap cache stats: add %lu, delete %lu, find %lu/%lu\n",
 		swap_cache_info.add_total, swap_cache_info.del_total,
 		swap_cache_info.find_success, swap_cache_info.find_total);
-	printk("Free swap  = %lukB\n", nr_swap_pages << (PAGE_SHIFT - 10));
+	printk("Free swap  = %ldkB\n", nr_swap_pages << (PAGE_SHIFT - 10));
 	printk("Total swap = %lukB\n", total_swap_pages << (PAGE_SHIFT - 10));
 }
 
@@ -201,7 +201,7 @@ void delete_from_swap_cache(struct page *page)
  */
 static inline void free_swap_cache(struct page *page)
 {
-	if (PageSwapCache(page) && !TestSetPageLocked(page)) {
+	if (PageSwapCache(page) && trylock_page(page)) {
 		remove_exclusive_swap_page(page);
 		unlock_page(page);
 	}
@@ -302,9 +302,9 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
 		 * re-using the just freed swap entry for an existing page.
 		 * May fail (-ENOMEM) if radix-tree node allocation failed.
 		 */
-		SetPageLocked(new_page);
+		set_page_locked(new_page);
 		err = add_to_swap_cache(new_page, entry, gfp_mask & GFP_KERNEL);
-		if (!err) {
+		if (likely(!err)) {
 			/*
 			 * Initiate read into locked page and return.
 			 */
@@ -312,7 +312,7 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
 			swap_readpage(NULL, new_page);
 			return new_page;
 		}
-		ClearPageLocked(new_page);
+		clear_page_locked(new_page);
 		swap_free(entry);
 	} while (err != -ENOMEM);
 
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 6beb6251e99..1e330f2998f 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -403,7 +403,7 @@ void free_swap_and_cache(swp_entry_t entry)
 	if (p) {
 		if (swap_entry_free(p, swp_offset(entry)) == 1) {
 			page = find_get_page(&swapper_space, entry.val);
-			if (page && unlikely(TestSetPageLocked(page))) {
+			if (page && unlikely(!trylock_page(page))) {
 				page_cache_release(page);
 				page = NULL;
 			}
@@ -656,8 +656,8 @@ static int unuse_mm(struct mm_struct *mm,
 
 	if (!down_read_trylock(&mm->mmap_sem)) {
 		/*
-		 * Activate page so shrink_cache is unlikely to unmap its
-		 * ptes while lock is dropped, so swapoff can make progress.
+		 * Activate page so shrink_inactive_list is unlikely to unmap
+		 * its ptes while lock is dropped, so swapoff can make progress.
 		 */
 		activate_page(page);
 		unlock_page(page);
diff --git a/mm/truncate.c b/mm/truncate.c
index e68443d7456..6650c1d878b 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -104,7 +104,6 @@ truncate_complete_page(struct address_space *mapping, struct page *page)
 	cancel_dirty_page(page, PAGE_CACHE_SIZE);
 
 	remove_from_page_cache(page);
-	ClearPageUptodate(page);
 	ClearPageMappedToDisk(page);
 	page_cache_release(page);	/* pagecache ref */
 }
@@ -188,7 +187,7 @@ void truncate_inode_pages_range(struct address_space *mapping,
 			if (page_index > next)
 				next = page_index;
 			next++;
-			if (TestSetPageLocked(page))
+			if (!trylock_page(page))
 				continue;
 			if (PageWriteback(page)) {
 				unlock_page(page);
@@ -281,7 +280,7 @@ unsigned long __invalidate_mapping_pages(struct address_space *mapping,
 			pgoff_t index;
 			int lock_failed;
 
-			lock_failed = TestSetPageLocked(page);
+			lock_failed = !trylock_page(page);
 
 			/*
 			 * We really shouldn't be looking at the ->index of an
@@ -356,7 +355,6 @@ invalidate_complete_page2(struct address_space *mapping, struct page *page)
 	BUG_ON(PagePrivate(page));
 	__remove_from_page_cache(page);
 	spin_unlock_irq(&mapping->tree_lock);
-	ClearPageUptodate(page);
 	page_cache_release(page);	/* pagecache ref */
 	return 1;
 failed:
@@ -382,7 +380,7 @@ static int do_launder_page(struct address_space *mapping, struct page *page)
  * Any pages which are found to be mapped into pagetables are unmapped prior to
  * invalidation.
  *
- * Returns -EIO if any pages could not be invalidated.
+ * Returns -EBUSY if any pages could not be invalidated.
  */
 int invalidate_inode_pages2_range(struct address_space *mapping,
 				  pgoff_t start, pgoff_t end)
@@ -442,7 +440,7 @@ int invalidate_inode_pages2_range(struct address_space *mapping,
 			ret2 = do_launder_page(mapping, page);
 			if (ret2 == 0) {
 				if (!invalidate_complete_page2(mapping, page))
-					ret2 = -EIO;
+					ret2 = -EBUSY;
 			}
 			if (ret2 < 0)
 				ret = ret2;
diff --git a/mm/util.c b/mm/util.c
index 9341ca77bd8..cb00b748ce4 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -171,3 +171,18 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 	mm->unmap_area = arch_unmap_area;
 }
 #endif
+
+int __attribute__((weak)) get_user_pages_fast(unsigned long start,
+				int nr_pages, int write, struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	int ret;
+
+	down_read(&mm->mmap_sem);
+	ret = get_user_pages(current, mm, start, nr_pages,
+					write, 0, pages, NULL);
+	up_read(&mm->mmap_sem);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(get_user_pages_fast);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 8f71761bc4b..1ff1a58e7c1 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -496,7 +496,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 		page = lru_to_page(page_list);
 		list_del(&page->lru);
 
-		if (TestSetPageLocked(page))
+		if (!trylock_page(page))
 			goto keep;
 
 		VM_BUG_ON(PageActive(page));
@@ -582,7 +582,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 				 * A synchronous write - probably a ramdisk.  Go
 				 * ahead and try to reclaim the page.
 				 */
-				if (TestSetPageLocked(page))
+				if (!trylock_page(page))
 					goto keep;
 				if (PageDirty(page) || PageWriteback(page))
 					goto keep_locked;
@@ -1408,7 +1408,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 		if (sc->nr_scanned && priority < DEF_PRIORITY - 2)
 			congestion_wait(WRITE, HZ/10);
 	}
-	/* top priority shrink_caches still had more to do? don't OOM, then */
+	/* top priority shrink_zones still had more to do? don't OOM, then */
 	if (!sc->all_unreclaimable && scan_global_lru(sc))
 		ret = nr_reclaimed;
 out:
@@ -1979,7 +1979,7 @@ module_init(kswapd_init)
 int zone_reclaim_mode __read_mostly;
 
 #define RECLAIM_OFF 0
-#define RECLAIM_ZONE (1<<0)	/* Run shrink_cache on the zone */
+#define RECLAIM_ZONE (1<<0)	/* Run shrink_inactive_list on the zone */
 #define RECLAIM_WRITE (1<<1)	/* Writeout pages during reclaim */
 #define RECLAIM_SWAP (1<<2)	/* Swap pages out during reclaim */
 
diff --git a/mm/vmstat.c b/mm/vmstat.c
index b0d08e667ec..d7826af2fb0 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -516,9 +516,26 @@ static void pagetypeinfo_showblockcount_print(struct seq_file *m,
 			continue;
 
 		page = pfn_to_page(pfn);
+#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES
+		/*
+		 * Ordinarily, memory holes in flatmem still have a valid
+		 * memmap for the PFN range. However, an architecture for
+		 * embedded systems (e.g. ARM) can free up the memmap backing
+		 * holes to save memory on the assumption the memmap is
+		 * never used. The page_zone linkages are then broken even
+		 * though pfn_valid() returns true. Skip the page if the
+		 * linkages are broken. Even if this test passed, the impact
+		 * is that the counters for the movable type are off but
+		 * fragmentation monitoring is likely meaningless on small
+		 * systems.
+		 */
+		if (page_zone(page) != zone)
+			continue;
+#endif
 		mtype = get_pageblock_migratetype(page);
 
-		count[mtype]++;
+		if (mtype < MIGRATE_TYPES)
+			count[mtype]++;
 	}
 
 	/* Print counts */
diff --git a/net/Kconfig b/net/Kconfig
index b9866875174..7612cc8c337 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -2,9 +2,7 @@
 # Network configuration
 #
 
-menu "Networking"
-
-config NET
+menuconfig NET
 	bool "Networking support"
 	---help---
 	  Unless you really know what you are doing, you should say Y here.
@@ -22,7 +20,6 @@ config NET
 	  recommended to read the NET-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-# Make sure that all config symbols are dependent on NET
 if NET
 
 menu "Networking options"
@@ -252,5 +249,3 @@ source "net/rfkill/Kconfig"
 source "net/9p/Kconfig"
 
 endif   # if NET
-endmenu # Networking
-
diff --git a/net/atm/mpc.c b/net/atm/mpc.c
index 4fccaa1e07b..11b16d16661 100644
--- a/net/atm/mpc.c
+++ b/net/atm/mpc.c
@@ -62,11 +62,13 @@ static void MPOA_cache_impos_rcvd(struct k_message *msg, struct mpoa_client *mpc
 static void set_mpc_ctrl_addr_rcvd(struct k_message *mesg, struct mpoa_client *mpc);
 static void set_mps_mac_addr_rcvd(struct k_message *mesg, struct mpoa_client *mpc);
 
-static uint8_t *copy_macs(struct mpoa_client *mpc, uint8_t *router_mac,
-			  uint8_t *tlvs, uint8_t mps_macs, uint8_t device_type);
+static const uint8_t *copy_macs(struct mpoa_client *mpc,
+				const uint8_t *router_mac,
+				const uint8_t *tlvs, uint8_t mps_macs,
+				uint8_t device_type);
 static void purge_egress_shortcut(struct atm_vcc *vcc, eg_cache_entry *entry);
 
-static void send_set_mps_ctrl_addr(char *addr, struct mpoa_client *mpc);
+static void send_set_mps_ctrl_addr(const char *addr, struct mpoa_client *mpc);
 static void mpoad_close(struct atm_vcc *vcc);
 static int msg_from_mpoad(struct atm_vcc *vcc, struct sk_buff *skb);
 
@@ -351,12 +353,12 @@ static const char *mpoa_device_type_string(char type)
  * lec sees a TLV it uses the pointer to call this function.
  *
  */
-static void lane2_assoc_ind(struct net_device *dev, uint8_t *mac_addr,
-			    uint8_t *tlvs, uint32_t sizeoftlvs)
+static void lane2_assoc_ind(struct net_device *dev, const u8 *mac_addr,
+			    const u8 *tlvs, u32 sizeoftlvs)
 {
 	uint32_t type;
 	uint8_t length, mpoa_device_type, number_of_mps_macs;
-	uint8_t *end_of_tlvs;
+	const uint8_t *end_of_tlvs;
 	struct mpoa_client *mpc;
 
 	mpoa_device_type = number_of_mps_macs = 0; /* silence gcc */
@@ -430,8 +432,10 @@ static void lane2_assoc_ind(struct net_device *dev, uint8_t *mac_addr,
  * plus the possible MAC address(es) to mpc->mps_macs.
  * For a freshly allocated MPOA client mpc->mps_macs == 0.
  */
-static uint8_t *copy_macs(struct mpoa_client *mpc, uint8_t *router_mac,
-			  uint8_t *tlvs, uint8_t mps_macs, uint8_t device_type)
+static const uint8_t *copy_macs(struct mpoa_client *mpc,
+				const uint8_t *router_mac,
+				const uint8_t *tlvs, uint8_t mps_macs,
+				uint8_t device_type)
 {
 	int num_macs;
 	num_macs = (mps_macs > 1) ? mps_macs : 1;
@@ -811,7 +815,7 @@ static int atm_mpoa_mpoad_attach (struct atm_vcc *vcc, int arg)
 	return arg;
 }
 
-static void send_set_mps_ctrl_addr(char *addr, struct mpoa_client *mpc)
+static void send_set_mps_ctrl_addr(const char *addr, struct mpoa_client *mpc)
 {
 	struct k_message mesg;
 
diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c
index f597987b242..f288fc4aef9 100644
--- a/net/ax25/sysctl_net_ax25.c
+++ b/net/ax25/sysctl_net_ax25.c
@@ -36,6 +36,7 @@ static struct ctl_path ax25_path[] = {
 	{ .procname = "ax25", .ctl_name = NET_AX25, },
 	{ }
 };
+
 static const ctl_table ax25_param_table[] = {
 	{
 		.ctl_name	= NET_AX25_IP_DEFAULT_MODE,
@@ -167,6 +168,7 @@ static const ctl_table ax25_param_table[] = {
 		.extra1		= &min_proto,
 		.extra2		= &max_proto
 	},
+#ifdef CONFIG_AX25_DAMA_SLAVE
 	{
 		.ctl_name	= NET_AX25_DAMA_SLAVE_TIMEOUT,
 		.procname	= "dama_slave_timeout",
@@ -177,6 +179,8 @@ static const ctl_table ax25_param_table[] = {
 		.extra1		= &min_ds_timeout,
 		.extra2		= &max_ds_timeout
 	},
+#endif
+
 	{ .ctl_name = 0 }	/* that's all, folks! */
 };
 
@@ -210,16 +214,6 @@ void ax25_register_sysctl(void)
 		ax25_table[n].procname     = ax25_dev->dev->name;
 		ax25_table[n].mode         = 0555;
 
-#ifndef CONFIG_AX25_DAMA_SLAVE
-		/*
-		 * We do not wish to have a representation of this parameter
-		 * in /proc/sys/ when configured *not* to include the
-		 * AX.25 DAMA slave code, do we?
-		 */
-
-		child[AX25_VALUES_DS_TIMEOUT].procname = NULL;
-#endif
-
 		child[AX25_MAX_VALUES].ctl_name = 0;	/* just in case... */
 
 		for (k = 0; k < AX25_MAX_VALUES; k++)
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 4e59df5f8e0..f6348e078aa 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -49,7 +49,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "2.12"
+#define VERSION "2.13"
 
 /* Bluetooth sockets */
 #define BT_MAX_PROTO	8
@@ -456,7 +456,7 @@ static void __exit bt_exit(void)
 subsys_initcall(bt_init);
 module_exit(bt_exit);
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth Core ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c
index 021172c0e66..80ba30cf4b6 100644
--- a/net/bluetooth/bnep/core.c
+++ b/net/bluetooth/bnep/core.c
@@ -57,7 +57,10 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "1.2"
+#define VERSION "1.3"
+
+static int compress_src = 1;
+static int compress_dst = 1;
 
 static LIST_HEAD(bnep_session_list);
 static DECLARE_RWSEM(bnep_session_sem);
@@ -418,10 +421,10 @@ static inline int bnep_tx_frame(struct bnep_session *s, struct sk_buff *skb)
 	iv[il++] = (struct kvec) { &type, 1 };
 	len++;
 
-	if (!compare_ether_addr(eh->h_dest, s->eh.h_source))
+	if (compress_src && !compare_ether_addr(eh->h_dest, s->eh.h_source))
 		type |= 0x01;
 
-	if (!compare_ether_addr(eh->h_source, s->eh.h_dest))
+	if (compress_dst && !compare_ether_addr(eh->h_source, s->eh.h_dest))
 		type |= 0x02;
 
 	if (type)
@@ -727,7 +730,13 @@ static void __exit bnep_exit(void)
 module_init(bnep_init);
 module_exit(bnep_exit);
 
-MODULE_AUTHOR("David Libault <david.libault@inventel.fr>, Maxim Krasnyansky <maxk@qualcomm.com>");
+module_param(compress_src, bool, 0644);
+MODULE_PARM_DESC(compress_src, "Compress sources headers");
+
+module_param(compress_dst, bool, 0644);
+MODULE_PARM_DESC(compress_dst, "Compress destination headers");
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth BNEP ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index ca8d05245ca..b7002429f15 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -330,7 +330,7 @@ EXPORT_SYMBOL(hci_get_route);
 
 /* Create SCO or ACL connection.
  * Device _must_ be locked */
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst)
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 auth_type)
 {
 	struct hci_conn *acl;
 	struct hci_conn *sco;
@@ -344,8 +344,10 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst)
 
 	hci_conn_hold(acl);
 
-	if (acl->state == BT_OPEN || acl->state == BT_CLOSED)
+	if (acl->state == BT_OPEN || acl->state == BT_CLOSED) {
+		acl->auth_type = auth_type;
 		hci_acl_connect(acl);
+	}
 
 	if (type == ACL_LINK)
 		return acl;
@@ -374,6 +376,19 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst)
 }
 EXPORT_SYMBOL(hci_connect);
 
+/* Check link security requirement */
+int hci_conn_check_link_mode(struct hci_conn *conn)
+{
+	BT_DBG("conn %p", conn);
+
+	if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0 &&
+					!(conn->link_mode & HCI_LM_ENCRYPT))
+		return 0;
+
+	return 1;
+}
+EXPORT_SYMBOL(hci_conn_check_link_mode);
+
 /* Authenticate remote device */
 int hci_conn_auth(struct hci_conn *conn)
 {
@@ -381,7 +396,7 @@ int hci_conn_auth(struct hci_conn *conn)
 
 	if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0) {
 		if (!(conn->auth_type & 0x01)) {
-			conn->auth_type = HCI_AT_GENERAL_BONDING_MITM;
+			conn->auth_type |= 0x01;
 			conn->link_mode &= ~HCI_LM_AUTH;
 		}
 	}
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index f5b21cb9369..278a3ace14f 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -164,6 +164,9 @@ static inline int hci_request(struct hci_dev *hdev, void (*req)(struct hci_dev *
 {
 	int ret;
 
+	if (!test_bit(HCI_UP, &hdev->flags))
+		return -ENETDOWN;
+
 	/* Serialize all requests */
 	hci_req_lock(hdev);
 	ret = __hci_request(hdev, req, opt, timeout);
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 0e3db289f4b..ad7a553d771 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1605,14 +1605,11 @@ static inline void hci_remote_ext_features_evt(struct hci_dev *hdev, struct sk_b
 
 		if (conn->state == BT_CONFIG) {
 			if (!ev->status && hdev->ssp_mode > 0 &&
-							conn->ssp_mode > 0) {
-				if (conn->out) {
-					struct hci_cp_auth_requested cp;
-					cp.handle = ev->handle;
-					hci_send_cmd(hdev,
-						HCI_OP_AUTH_REQUESTED,
+					conn->ssp_mode > 0 && conn->out) {
+				struct hci_cp_auth_requested cp;
+				cp.handle = ev->handle;
+				hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED,
 							sizeof(cp), &cp);
-				}
 			} else {
 				conn->state = BT_CONNECTED;
 				hci_proto_connect_cfm(conn, ev->status);
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index c85bf8f678d..f4f6615cad9 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -3,8 +3,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <linux/platform_device.h>
-
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
@@ -12,10 +10,164 @@
 #undef  BT_DBG
 #define BT_DBG(D...)
 #endif
+
+struct class *bt_class = NULL;
+EXPORT_SYMBOL_GPL(bt_class);
+
 static struct workqueue_struct *btaddconn;
 static struct workqueue_struct *btdelconn;
 
-static inline char *typetostr(int type)
+static inline char *link_typetostr(int type)
+{
+	switch (type) {
+	case ACL_LINK:
+		return "ACL";
+	case SCO_LINK:
+		return "SCO";
+	case ESCO_LINK:
+		return "eSCO";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static ssize_t show_link_type(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct hci_conn *conn = dev_get_drvdata(dev);
+	return sprintf(buf, "%s\n", link_typetostr(conn->type));
+}
+
+static ssize_t show_link_address(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct hci_conn *conn = dev_get_drvdata(dev);
+	bdaddr_t bdaddr;
+	baswap(&bdaddr, &conn->dst);
+	return sprintf(buf, "%s\n", batostr(&bdaddr));
+}
+
+static ssize_t show_link_features(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct hci_conn *conn = dev_get_drvdata(dev);
+
+	return sprintf(buf, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+				conn->features[0], conn->features[1],
+				conn->features[2], conn->features[3],
+				conn->features[4], conn->features[5],
+				conn->features[6], conn->features[7]);
+}
+
+#define LINK_ATTR(_name,_mode,_show,_store) \
+struct device_attribute link_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+static LINK_ATTR(type, S_IRUGO, show_link_type, NULL);
+static LINK_ATTR(address, S_IRUGO, show_link_address, NULL);
+static LINK_ATTR(features, S_IRUGO, show_link_features, NULL);
+
+static struct attribute *bt_link_attrs[] = {
+	&link_attr_type.attr,
+	&link_attr_address.attr,
+	&link_attr_features.attr,
+	NULL
+};
+
+static struct attribute_group bt_link_group = {
+	.attrs = bt_link_attrs,
+};
+
+static struct attribute_group *bt_link_groups[] = {
+	&bt_link_group,
+	NULL
+};
+
+static void bt_link_release(struct device *dev)
+{
+	void *data = dev_get_drvdata(dev);
+	kfree(data);
+}
+
+static struct device_type bt_link = {
+	.name    = "link",
+	.groups  = bt_link_groups,
+	.release = bt_link_release,
+};
+
+static void add_conn(struct work_struct *work)
+{
+	struct hci_conn *conn = container_of(work, struct hci_conn, work);
+
+	flush_workqueue(btdelconn);
+
+	if (device_add(&conn->dev) < 0) {
+		BT_ERR("Failed to register connection device");
+		return;
+	}
+}
+
+void hci_conn_add_sysfs(struct hci_conn *conn)
+{
+	struct hci_dev *hdev = conn->hdev;
+
+	BT_DBG("conn %p", conn);
+
+	conn->dev.type = &bt_link;
+	conn->dev.class = bt_class;
+	conn->dev.parent = &hdev->dev;
+
+	snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
+					hdev->name, conn->handle);
+
+	dev_set_drvdata(&conn->dev, conn);
+
+	device_initialize(&conn->dev);
+
+	INIT_WORK(&conn->work, add_conn);
+
+	queue_work(btaddconn, &conn->work);
+}
+
+/*
+ * The rfcomm tty device will possibly retain even when conn
+ * is down, and sysfs doesn't support move zombie device,
+ * so we should move the device before conn device is destroyed.
+ */
+static int __match_tty(struct device *dev, void *data)
+{
+	return !strncmp(dev->bus_id, "rfcomm", 6);
+}
+
+static void del_conn(struct work_struct *work)
+{
+	struct hci_conn *conn = container_of(work, struct hci_conn, work);
+	struct hci_dev *hdev = conn->hdev;
+
+	while (1) {
+		struct device *dev;
+
+		dev = device_find_child(&conn->dev, NULL, __match_tty);
+		if (!dev)
+			break;
+		device_move(dev, NULL);
+		put_device(dev);
+	}
+
+	device_del(&conn->dev);
+	put_device(&conn->dev);
+	hci_dev_put(hdev);
+}
+
+void hci_conn_del_sysfs(struct hci_conn *conn)
+{
+	BT_DBG("conn %p", conn);
+
+	if (!device_is_registered(&conn->dev))
+		return;
+
+	INIT_WORK(&conn->work, del_conn);
+
+	queue_work(btdelconn, &conn->work);
+}
+
+static inline char *host_typetostr(int type)
 {
 	switch (type) {
 	case HCI_VIRTUAL:
@@ -40,7 +192,7 @@ static inline char *typetostr(int type)
 static ssize_t show_type(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct hci_dev *hdev = dev_get_drvdata(dev);
-	return sprintf(buf, "%s\n", typetostr(hdev->type));
+	return sprintf(buf, "%s\n", host_typetostr(hdev->type));
 }
 
 static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
@@ -221,183 +373,62 @@ static DEVICE_ATTR(sniff_max_interval, S_IRUGO | S_IWUSR,
 static DEVICE_ATTR(sniff_min_interval, S_IRUGO | S_IWUSR,
 				show_sniff_min_interval, store_sniff_min_interval);
 
-static struct device_attribute *bt_attrs[] = {
-	&dev_attr_type,
-	&dev_attr_name,
-	&dev_attr_class,
-	&dev_attr_address,
-	&dev_attr_features,
-	&dev_attr_manufacturer,
-	&dev_attr_hci_version,
-	&dev_attr_hci_revision,
-	&dev_attr_inquiry_cache,
-	&dev_attr_idle_timeout,
-	&dev_attr_sniff_max_interval,
-	&dev_attr_sniff_min_interval,
+static struct attribute *bt_host_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_name.attr,
+	&dev_attr_class.attr,
+	&dev_attr_address.attr,
+	&dev_attr_features.attr,
+	&dev_attr_manufacturer.attr,
+	&dev_attr_hci_version.attr,
+	&dev_attr_hci_revision.attr,
+	&dev_attr_inquiry_cache.attr,
+	&dev_attr_idle_timeout.attr,
+	&dev_attr_sniff_max_interval.attr,
+	&dev_attr_sniff_min_interval.attr,
 	NULL
 };
 
-static ssize_t show_conn_type(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct hci_conn *conn = dev_get_drvdata(dev);
-	return sprintf(buf, "%s\n", conn->type == ACL_LINK ? "ACL" : "SCO");
-}
-
-static ssize_t show_conn_address(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct hci_conn *conn = dev_get_drvdata(dev);
-	bdaddr_t bdaddr;
-	baswap(&bdaddr, &conn->dst);
-	return sprintf(buf, "%s\n", batostr(&bdaddr));
-}
-
-static ssize_t show_conn_features(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct hci_conn *conn = dev_get_drvdata(dev);
-
-	return sprintf(buf, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
-				conn->features[0], conn->features[1],
-				conn->features[2], conn->features[3],
-				conn->features[4], conn->features[5],
-				conn->features[6], conn->features[7]);
-}
-
-#define CONN_ATTR(_name,_mode,_show,_store) \
-struct device_attribute conn_attr_##_name = __ATTR(_name,_mode,_show,_store)
-
-static CONN_ATTR(type, S_IRUGO, show_conn_type, NULL);
-static CONN_ATTR(address, S_IRUGO, show_conn_address, NULL);
-static CONN_ATTR(features, S_IRUGO, show_conn_features, NULL);
-
-static struct device_attribute *conn_attrs[] = {
-	&conn_attr_type,
-	&conn_attr_address,
-	&conn_attr_features,
-	NULL
+static struct attribute_group bt_host_group = {
+	.attrs = bt_host_attrs,
 };
 
-struct class *bt_class = NULL;
-EXPORT_SYMBOL_GPL(bt_class);
-
-static struct bus_type bt_bus = {
-	.name	= "bluetooth",
+static struct attribute_group *bt_host_groups[] = {
+	&bt_host_group,
+	NULL
 };
 
-static struct platform_device *bt_platform;
-
-static void bt_release(struct device *dev)
+static void bt_host_release(struct device *dev)
 {
 	void *data = dev_get_drvdata(dev);
 	kfree(data);
 }
 
-static void add_conn(struct work_struct *work)
-{
-	struct hci_conn *conn = container_of(work, struct hci_conn, work);
-	int i;
-
-	flush_workqueue(btdelconn);
-
-	if (device_add(&conn->dev) < 0) {
-		BT_ERR("Failed to register connection device");
-		return;
-	}
-
-	for (i = 0; conn_attrs[i]; i++)
-		if (device_create_file(&conn->dev, conn_attrs[i]) < 0)
-			BT_ERR("Failed to create connection attribute");
-}
-
-void hci_conn_add_sysfs(struct hci_conn *conn)
-{
-	struct hci_dev *hdev = conn->hdev;
-
-	BT_DBG("conn %p", conn);
-
-	conn->dev.bus = &bt_bus;
-	conn->dev.parent = &hdev->dev;
-
-	conn->dev.release = bt_release;
-
-	snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
-					hdev->name, conn->handle);
-
-	dev_set_drvdata(&conn->dev, conn);
-
-	device_initialize(&conn->dev);
-
-	INIT_WORK(&conn->work, add_conn);
-
-	queue_work(btaddconn, &conn->work);
-}
-
-/*
- * The rfcomm tty device will possibly retain even when conn
- * is down, and sysfs doesn't support move zombie device,
- * so we should move the device before conn device is destroyed.
- */
-static int __match_tty(struct device *dev, void *data)
-{
-	return !strncmp(dev->bus_id, "rfcomm", 6);
-}
-
-static void del_conn(struct work_struct *work)
-{
-	struct hci_conn *conn = container_of(work, struct hci_conn, work);
-	struct hci_dev *hdev = conn->hdev;
-
-	while (1) {
-		struct device *dev;
-
-		dev = device_find_child(&conn->dev, NULL, __match_tty);
-		if (!dev)
-			break;
-		device_move(dev, NULL);
-		put_device(dev);
-	}
-
-	device_del(&conn->dev);
-	put_device(&conn->dev);
-	hci_dev_put(hdev);
-}
-
-void hci_conn_del_sysfs(struct hci_conn *conn)
-{
-	BT_DBG("conn %p", conn);
-
-	if (!device_is_registered(&conn->dev))
-		return;
-
-	INIT_WORK(&conn->work, del_conn);
-
-	queue_work(btdelconn, &conn->work);
-}
+static struct device_type bt_host = {
+	.name    = "host",
+	.groups  = bt_host_groups,
+	.release = bt_host_release,
+};
 
 int hci_register_sysfs(struct hci_dev *hdev)
 {
 	struct device *dev = &hdev->dev;
-	unsigned int i;
 	int err;
 
 	BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type);
 
-	dev->bus = &bt_bus;
+	dev->type = &bt_host;
+	dev->class = bt_class;
 	dev->parent = hdev->parent;
 
 	strlcpy(dev->bus_id, hdev->name, BUS_ID_SIZE);
 
-	dev->release = bt_release;
-
 	dev_set_drvdata(dev, hdev);
 
 	err = device_register(dev);
 	if (err < 0)
 		return err;
 
-	for (i = 0; bt_attrs[i]; i++)
-		if (device_create_file(dev, bt_attrs[i]) < 0)
-			BT_ERR("Failed to create device attribute");
-
 	return 0;
 }
 
@@ -410,59 +441,30 @@ void hci_unregister_sysfs(struct hci_dev *hdev)
 
 int __init bt_sysfs_init(void)
 {
-	int err;
-
 	btaddconn = create_singlethread_workqueue("btaddconn");
-	if (!btaddconn) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!btaddconn)
+		return -ENOMEM;
 
 	btdelconn = create_singlethread_workqueue("btdelconn");
 	if (!btdelconn) {
-		err = -ENOMEM;
-		goto out_del;
-	}
-
-	bt_platform = platform_device_register_simple("bluetooth", -1, NULL, 0);
-	if (IS_ERR(bt_platform)) {
-		err = PTR_ERR(bt_platform);
-		goto out_platform;
+		destroy_workqueue(btaddconn);
+		return -ENOMEM;
 	}
 
-	err = bus_register(&bt_bus);
-	if (err < 0)
-		goto out_bus;
-
 	bt_class = class_create(THIS_MODULE, "bluetooth");
 	if (IS_ERR(bt_class)) {
-		err = PTR_ERR(bt_class);
-		goto out_class;
+		destroy_workqueue(btdelconn);
+		destroy_workqueue(btaddconn);
+		return PTR_ERR(bt_class);
 	}
 
 	return 0;
-
-out_class:
-	bus_unregister(&bt_bus);
-out_bus:
-	platform_device_unregister(bt_platform);
-out_platform:
-	destroy_workqueue(btdelconn);
-out_del:
-	destroy_workqueue(btaddconn);
-out:
-	return err;
 }
 
 void bt_sysfs_cleanup(void)
 {
 	destroy_workqueue(btaddconn);
-
 	destroy_workqueue(btdelconn);
 
 	class_destroy(bt_class);
-
-	bus_unregister(&bt_bus);
-
-	platform_device_unregister(bt_platform);
 }
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index c1239852834..9610a9c85b9 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -55,7 +55,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "2.10"
+#define VERSION "2.11"
 
 static u32 l2cap_feat_mask = 0x0000;
 
@@ -778,6 +778,7 @@ static int l2cap_do_connect(struct sock *sk)
 	struct l2cap_conn *conn;
 	struct hci_conn *hcon;
 	struct hci_dev *hdev;
+	__u8 auth_type;
 	int err = 0;
 
 	BT_DBG("%s -> %s psm 0x%2.2x", batostr(src), batostr(dst), l2cap_pi(sk)->psm);
@@ -789,7 +790,21 @@ static int l2cap_do_connect(struct sock *sk)
 
 	err = -ENOMEM;
 
-	hcon = hci_connect(hdev, ACL_LINK, dst);
+	if (l2cap_pi(sk)->link_mode & L2CAP_LM_AUTH ||
+			l2cap_pi(sk)->link_mode & L2CAP_LM_ENCRYPT ||
+				l2cap_pi(sk)->link_mode & L2CAP_LM_SECURE) {
+		if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001))
+			auth_type = HCI_AT_NO_BONDING_MITM;
+		else
+			auth_type = HCI_AT_GENERAL_BONDING_MITM;
+	} else {
+		if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001))
+			auth_type = HCI_AT_NO_BONDING;
+		else
+			auth_type = HCI_AT_GENERAL_BONDING;
+	}
+
+	hcon = hci_connect(hdev, ACL_LINK, dst, auth_type);
 	if (!hcon)
 		goto done;
 
@@ -1553,10 +1568,10 @@ static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hd
 	struct l2cap_conn_req *req = (struct l2cap_conn_req *) data;
 	struct l2cap_conn_rsp rsp;
 	struct sock *sk, *parent;
-	int result, status = 0;
+	int result, status = L2CAP_CS_NO_INFO;
 
 	u16 dcid = 0, scid = __le16_to_cpu(req->scid);
-	__le16 psm  = req->psm;
+	__le16 psm = req->psm;
 
 	BT_DBG("psm 0x%2.2x scid 0x%4.4x", psm, scid);
 
@@ -1567,6 +1582,13 @@ static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hd
 		goto sendresp;
 	}
 
+	/* Check if the ACL is secure enough (if not SDP) */
+	if (psm != cpu_to_le16(0x0001) &&
+				!hci_conn_check_link_mode(conn->hcon)) {
+		result = L2CAP_CR_SEC_BLOCK;
+		goto response;
+	}
+
 	result = L2CAP_CR_NO_MEM;
 
 	/* Check for backlog size */
@@ -2224,7 +2246,7 @@ static int l2cap_auth_cfm(struct hci_conn *hcon, u8 status)
 			rsp.scid   = cpu_to_le16(l2cap_pi(sk)->dcid);
 			rsp.dcid   = cpu_to_le16(l2cap_pi(sk)->scid);
 			rsp.result = cpu_to_le16(result);
-			rsp.status = cpu_to_le16(0);
+			rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
 			l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
 					L2CAP_CONN_RSP, sizeof(rsp), &rsp);
 		}
@@ -2296,7 +2318,7 @@ static int l2cap_encrypt_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
 			rsp.scid   = cpu_to_le16(l2cap_pi(sk)->dcid);
 			rsp.dcid   = cpu_to_le16(l2cap_pi(sk)->scid);
 			rsp.result = cpu_to_le16(result);
-			rsp.status = cpu_to_le16(0);
+			rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
 			l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
 					L2CAP_CONN_RSP, sizeof(rsp), &rsp);
 		}
@@ -2516,7 +2538,7 @@ EXPORT_SYMBOL(l2cap_load);
 module_init(l2cap_init);
 module_exit(l2cap_exit);
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth L2CAP ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 6cfc7ba611b..ba537fae0a4 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2115,7 +2115,7 @@ MODULE_PARM_DESC(channel_mtu, "Default MTU for the RFCOMM channel");
 module_param(l2cap_mtu, uint, 0644);
 MODULE_PARM_DESC(l2cap_mtu, "Default MTU for the L2CAP connection");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth RFCOMM ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 8cda4987486..0cc91e6da76 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -200,7 +200,7 @@ static int sco_connect(struct sock *sk)
 	else
 		type = SCO_LINK;
 
-	hcon = hci_connect(hdev, type, dst);
+	hcon = hci_connect(hdev, type, dst, HCI_AT_NO_BONDING);
 	if (!hcon)
 		goto done;
 
@@ -1002,7 +1002,7 @@ module_exit(sco_exit);
 module_param(disable_esco, bool, 0644);
 MODULE_PARM_DESC(disable_esco, "Disable eSCO connection creation");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth SCO ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index d9449df7cad..4f52c3d50eb 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -68,10 +68,17 @@ static int br_dev_stop(struct net_device *dev)
 
 static int br_change_mtu(struct net_device *dev, int new_mtu)
 {
-	if (new_mtu < 68 || new_mtu > br_min_mtu(netdev_priv(dev)))
+	struct net_bridge *br = netdev_priv(dev);
+	if (new_mtu < 68 || new_mtu > br_min_mtu(br))
 		return -EINVAL;
 
 	dev->mtu = new_mtu;
+
+#ifdef CONFIG_BRIDGE_NETFILTER
+	/* remember the MTU in the rtable for PMTU */
+	br->fake_rtable.u.dst.metrics[RTAX_MTU - 1] = new_mtu;
+#endif
+
 	return 0;
 }
 
@@ -141,11 +148,16 @@ static int br_set_tx_csum(struct net_device *dev, u32 data)
 }
 
 static struct ethtool_ops br_ethtool_ops = {
-	.get_drvinfo = br_getinfo,
-	.get_link = ethtool_op_get_link,
-	.set_sg = br_set_sg,
-	.set_tx_csum = br_set_tx_csum,
-	.set_tso = br_set_tso,
+	.get_drvinfo    = br_getinfo,
+	.get_link	= ethtool_op_get_link,
+	.get_tx_csum	= ethtool_op_get_tx_csum,
+	.set_tx_csum 	= br_set_tx_csum,
+	.get_sg		= ethtool_op_get_sg,
+	.set_sg		= br_set_sg,
+	.get_tso	= ethtool_op_get_tso,
+	.set_tso	= br_set_tso,
+	.get_ufo	= ethtool_op_get_ufo,
+	.get_flags	= ethtool_op_get_flags,
 };
 
 void br_dev_setup(struct net_device *dev)
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index a072ea5ca6f..63c18aacde8 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -202,6 +202,9 @@ static struct net_device *new_bridge_dev(const char *name)
 	br->topology_change = 0;
 	br->topology_change_detected = 0;
 	br->ageing_time = 300 * HZ;
+
+	br_netfilter_rtable_init(br);
+
 	INIT_LIST_HEAD(&br->age_list);
 
 	br_stp_timer_init(br);
diff --git a/net/bridge/br_ioctl.c b/net/bridge/br_ioctl.c
index eeee218eed8..5bbf0736217 100644
--- a/net/bridge/br_ioctl.c
+++ b/net/bridge/br_ioctl.c
@@ -188,15 +188,21 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		return 0;
 
 	case BRCTL_SET_BRIDGE_HELLO_TIME:
+	{
+		unsigned long t = clock_t_to_jiffies(args[1]);
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
+		if (t < HZ)
+			return -EINVAL;
+
 		spin_lock_bh(&br->lock);
-		br->bridge_hello_time = clock_t_to_jiffies(args[1]);
+		br->bridge_hello_time = t;
 		if (br_is_root_bridge(br))
 			br->hello_time = br->bridge_hello_time;
 		spin_unlock_bh(&br->lock);
 		return 0;
+	}
 
 	case BRCTL_SET_BRIDGE_MAX_AGE:
 		if (!capable(CAP_NET_ADMIN))
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index bb90cd7bace..6a9a6cd74b1 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -101,33 +101,30 @@ static inline __be16 pppoe_proto(const struct sk_buff *skb)
 	 pppoe_proto(skb) == htons(PPP_IPV6) && \
 	 brnf_filter_pppoe_tagged)
 
-/* We need these fake structures to make netfilter happy --
- * lots of places assume that skb->dst != NULL, which isn't
- * all that unreasonable.
- *
+/*
+ * Initialize bogus route table used to keep netfilter happy.
  * Currently, we fill in the PMTU entry because netfilter
  * refragmentation needs it, and the rt_flags entry because
  * ipt_REJECT needs it.  Future netfilter modules might
- * require us to fill additional fields. */
-static struct net_device __fake_net_device = {
-	.hard_header_len	= ETH_HLEN,
-#ifdef CONFIG_NET_NS
-	.nd_net			= &init_net,
-#endif
-};
+ * require us to fill additional fields.
+ */
+void br_netfilter_rtable_init(struct net_bridge *br)
+{
+	struct rtable *rt = &br->fake_rtable;
 
-static struct rtable __fake_rtable = {
-	.u = {
-		.dst = {
-			.__refcnt		= ATOMIC_INIT(1),
-			.dev			= &__fake_net_device,
-			.path			= &__fake_rtable.u.dst,
-			.metrics		= {[RTAX_MTU - 1] = 1500},
-			.flags			= DST_NOXFRM,
-		}
-	},
-	.rt_flags	= 0,
-};
+	atomic_set(&rt->u.dst.__refcnt, 1);
+	rt->u.dst.dev = br->dev;
+	rt->u.dst.path = &rt->u.dst;
+	rt->u.dst.metrics[RTAX_MTU - 1] = 1500;
+	rt->u.dst.flags	= DST_NOXFRM;
+}
+
+static inline struct rtable *bridge_parent_rtable(const struct net_device *dev)
+{
+	struct net_bridge_port *port = rcu_dereference(dev->br_port);
+
+	return port ? &port->br->fake_rtable : NULL;
+}
 
 static inline struct net_device *bridge_parent(const struct net_device *dev)
 {
@@ -226,8 +223,12 @@ static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb)
 	}
 	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
 
-	skb->rtable = &__fake_rtable;
-	dst_hold(&__fake_rtable.u.dst);
+	skb->rtable = bridge_parent_rtable(nf_bridge->physindev);
+	if (!skb->rtable) {
+		kfree_skb(skb);
+		return 0;
+	}
+	dst_hold(&skb->rtable->u.dst);
 
 	skb->dev = nf_bridge->physindev;
 	nf_bridge_push_encap_header(skb);
@@ -391,8 +392,12 @@ bridged_dnat:
 			skb->pkt_type = PACKET_HOST;
 		}
 	} else {
-		skb->rtable = &__fake_rtable;
-		dst_hold(&__fake_rtable.u.dst);
+		skb->rtable = bridge_parent_rtable(nf_bridge->physindev);
+		if (!skb->rtable) {
+			kfree_skb(skb);
+			return 0;
+		}
+		dst_hold(&skb->rtable->u.dst);
 	}
 
 	skb->dev = nf_bridge->physindev;
@@ -611,8 +616,8 @@ static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff *skb,
 				   const struct net_device *out,
 				   int (*okfn)(struct sk_buff *))
 {
-	if (skb->rtable == &__fake_rtable) {
-		dst_release(&__fake_rtable.u.dst);
+	if (skb->rtable && skb->rtable == bridge_parent_rtable(in)) {
+		dst_release(&skb->rtable->u.dst);
 		skb->rtable = NULL;
 	}
 
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 815ed38925b..c3dc18ddc04 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -15,6 +15,7 @@
 
 #include <linux/netdevice.h>
 #include <linux/if_bridge.h>
+#include <net/route.h>
 
 #define BR_HASH_BITS 8
 #define BR_HASH_SIZE (1 << BR_HASH_BITS)
@@ -92,6 +93,9 @@ struct net_bridge
 	struct hlist_head		hash[BR_HASH_SIZE];
 	struct list_head		age_list;
 	unsigned long			feature_mask;
+#ifdef CONFIG_BRIDGE_NETFILTER
+	struct rtable 			fake_rtable;
+#endif
 	unsigned long			flags;
 #define BR_SET_MAC_ADDR		0x00000001
 
@@ -197,9 +201,11 @@ extern int br_ioctl_deviceless_stub(struct net *net, unsigned int cmd, void __us
 #ifdef CONFIG_BRIDGE_NETFILTER
 extern int br_netfilter_init(void);
 extern void br_netfilter_fini(void);
+extern void br_netfilter_rtable_init(struct net_bridge *);
 #else
 #define br_netfilter_init()	(0)
 #define br_netfilter_fini()	do { } while(0)
+#define br_netfilter_rtable_init(x)
 #endif
 
 /* br_stp.c */
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index 921bbe5cb94..6e63ec3f1fc 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -368,14 +368,25 @@ static void br_make_blocking(struct net_bridge_port *p)
 /* called under bridge lock */
 static void br_make_forwarding(struct net_bridge_port *p)
 {
-	if (p->state == BR_STATE_BLOCKING) {
-		if (p->br->stp_enabled == BR_KERNEL_STP)
-			p->state = BR_STATE_LISTENING;
-		else
-			p->state = BR_STATE_LEARNING;
+	struct net_bridge *br = p->br;
 
-		br_log_state(p);
-		mod_timer(&p->forward_delay_timer, jiffies + p->br->forward_delay);	}
+	if (p->state != BR_STATE_BLOCKING)
+		return;
+
+	if (br->forward_delay == 0) {
+		p->state = BR_STATE_FORWARDING;
+		br_topology_change_detection(br);
+		del_timer(&p->forward_delay_timer);
+	}
+	else if (p->br->stp_enabled == BR_KERNEL_STP)
+		p->state = BR_STATE_LISTENING;
+	else
+		p->state = BR_STATE_LEARNING;
+
+	br_log_state(p);
+
+	if (br->forward_delay != 0)
+		mod_timer(&p->forward_delay_timer, jiffies + br->forward_delay);
 }
 
 /* called under bridge lock */
diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c
index 27d6a511c8c..158dee8b496 100644
--- a/net/bridge/br_sysfs_br.c
+++ b/net/bridge/br_sysfs_br.c
@@ -29,11 +29,12 @@
  */
 static ssize_t store_bridge_parm(struct device *d,
 				 const char *buf, size_t len,
-				 void (*set)(struct net_bridge *, unsigned long))
+				 int (*set)(struct net_bridge *, unsigned long))
 {
 	struct net_bridge *br = to_bridge(d);
 	char *endp;
 	unsigned long val;
+	int err;
 
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
@@ -43,9 +44,9 @@ static ssize_t store_bridge_parm(struct device *d,
 		return -EINVAL;
 
 	spin_lock_bh(&br->lock);
-	(*set)(br, val);
+	err = (*set)(br, val);
 	spin_unlock_bh(&br->lock);
-	return len;
+	return err ? err : len;
 }
 
 
@@ -56,12 +57,13 @@ static ssize_t show_forward_delay(struct device *d,
 	return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->forward_delay));
 }
 
-static void set_forward_delay(struct net_bridge *br, unsigned long val)
+static int set_forward_delay(struct net_bridge *br, unsigned long val)
 {
 	unsigned long delay = clock_t_to_jiffies(val);
 	br->forward_delay = delay;
 	if (br_is_root_bridge(br))
 		br->bridge_forward_delay = delay;
+	return 0;
 }
 
 static ssize_t store_forward_delay(struct device *d,
@@ -80,12 +82,17 @@ static ssize_t show_hello_time(struct device *d, struct device_attribute *attr,
 		       jiffies_to_clock_t(to_bridge(d)->hello_time));
 }
 
-static void set_hello_time(struct net_bridge *br, unsigned long val)
+static int set_hello_time(struct net_bridge *br, unsigned long val)
 {
 	unsigned long t = clock_t_to_jiffies(val);
+
+	if (t < HZ)
+		return -EINVAL;
+
 	br->hello_time = t;
 	if (br_is_root_bridge(br))
 		br->bridge_hello_time = t;
+	return 0;
 }
 
 static ssize_t store_hello_time(struct device *d,
@@ -104,12 +111,13 @@ static ssize_t show_max_age(struct device *d, struct device_attribute *attr,
 		       jiffies_to_clock_t(to_bridge(d)->max_age));
 }
 
-static void set_max_age(struct net_bridge *br, unsigned long val)
+static int set_max_age(struct net_bridge *br, unsigned long val)
 {
 	unsigned long t = clock_t_to_jiffies(val);
 	br->max_age = t;
 	if (br_is_root_bridge(br))
 		br->bridge_max_age = t;
+	return 0;
 }
 
 static ssize_t store_max_age(struct device *d, struct device_attribute *attr,
@@ -126,9 +134,10 @@ static ssize_t show_ageing_time(struct device *d,
 	return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->ageing_time));
 }
 
-static void set_ageing_time(struct net_bridge *br, unsigned long val)
+static int set_ageing_time(struct net_bridge *br, unsigned long val)
 {
 	br->ageing_time = clock_t_to_jiffies(val);
+	return 0;
 }
 
 static ssize_t store_ageing_time(struct device *d,
@@ -180,9 +189,10 @@ static ssize_t show_priority(struct device *d, struct device_attribute *attr,
 		       (br->bridge_id.prio[0] << 8) | br->bridge_id.prio[1]);
 }
 
-static void set_priority(struct net_bridge *br, unsigned long val)
+static int set_priority(struct net_bridge *br, unsigned long val)
 {
 	br_stp_set_bridge_priority(br, (u16) val);
+	return 0;
 }
 
 static ssize_t store_priority(struct device *d, struct device_attribute *attr,
diff --git a/net/core/datagram.c b/net/core/datagram.c
index dd61dcad601..52f577a0f54 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -339,6 +339,93 @@ fault:
 	return -EFAULT;
 }
 
+/**
+ *	skb_copy_datagram_from_iovec - Copy a datagram from an iovec.
+ *	@skb: buffer to copy
+ *	@offset: offset in the buffer to start copying to
+ *	@from: io vector to copy to
+ *	@len: amount of data to copy to buffer from iovec
+ *
+ *	Returns 0 or -EFAULT.
+ *	Note: the iovec is modified during the copy.
+ */
+int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset,
+				 struct iovec *from, int len)
+{
+	int start = skb_headlen(skb);
+	int i, copy = start - offset;
+
+	/* Copy header. */
+	if (copy > 0) {
+		if (copy > len)
+			copy = len;
+		if (memcpy_fromiovec(skb->data + offset, from, copy))
+			goto fault;
+		if ((len -= copy) == 0)
+			return 0;
+		offset += copy;
+	}
+
+	/* Copy paged appendix. Hmm... why does this look so complicated? */
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + skb_shinfo(skb)->frags[i].size;
+		if ((copy = end - offset) > 0) {
+			int err;
+			u8  *vaddr;
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			struct page *page = frag->page;
+
+			if (copy > len)
+				copy = len;
+			vaddr = kmap(page);
+			err = memcpy_fromiovec(vaddr + frag->page_offset +
+					       offset - start, from, copy);
+			kunmap(page);
+			if (err)
+				goto fault;
+
+			if (!(len -= copy))
+				return 0;
+			offset += copy;
+		}
+		start = end;
+	}
+
+	if (skb_shinfo(skb)->frag_list) {
+		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+
+		for (; list; list = list->next) {
+			int end;
+
+			WARN_ON(start > offset + len);
+
+			end = start + list->len;
+			if ((copy = end - offset) > 0) {
+				if (copy > len)
+					copy = len;
+				if (skb_copy_datagram_from_iovec(list,
+								 offset - start,
+								 from, copy))
+					goto fault;
+				if ((len -= copy) == 0)
+					return 0;
+				offset += copy;
+			}
+			start = end;
+		}
+	}
+	if (!len)
+		return 0;
+
+fault:
+	return -EFAULT;
+}
+EXPORT_SYMBOL(skb_copy_datagram_from_iovec);
+
 static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 				      u8 __user *to, int len,
 				      __wsum *csump)
diff --git a/net/core/dev.c b/net/core/dev.c
index 8d13a9b9f1d..e719ed29310 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1339,19 +1339,23 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 }
 
 
-void __netif_schedule(struct Qdisc *q)
+static inline void __netif_reschedule(struct Qdisc *q)
 {
-	if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state)) {
-		struct softnet_data *sd;
-		unsigned long flags;
+	struct softnet_data *sd;
+	unsigned long flags;
 
-		local_irq_save(flags);
-		sd = &__get_cpu_var(softnet_data);
-		q->next_sched = sd->output_queue;
-		sd->output_queue = q;
-		raise_softirq_irqoff(NET_TX_SOFTIRQ);
-		local_irq_restore(flags);
-	}
+	local_irq_save(flags);
+	sd = &__get_cpu_var(softnet_data);
+	q->next_sched = sd->output_queue;
+	sd->output_queue = q;
+	raise_softirq_irqoff(NET_TX_SOFTIRQ);
+	local_irq_restore(flags);
+}
+
+void __netif_schedule(struct Qdisc *q)
+{
+	if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state))
+		__netif_reschedule(q);
 }
 EXPORT_SYMBOL(__netif_schedule);
 
@@ -1796,16 +1800,19 @@ gso:
 	skb->tc_verd = SET_TC_AT(skb->tc_verd,AT_EGRESS);
 #endif
 	if (q->enqueue) {
-		spinlock_t *root_lock = qdisc_root_lock(q);
+		spinlock_t *root_lock = qdisc_lock(q);
 
 		spin_lock(root_lock);
 
-		rc = qdisc_enqueue_root(skb, q);
-		qdisc_run(q);
-
+		if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) {
+			kfree_skb(skb);
+			rc = NET_XMIT_DROP;
+		} else {
+			rc = qdisc_enqueue_root(skb, q);
+			qdisc_run(q);
+		}
 		spin_unlock(root_lock);
 
-		rc = rc == NET_XMIT_BYPASS ? NET_XMIT_SUCCESS : rc;
 		goto out;
 	}
 
@@ -1909,7 +1916,6 @@ int netif_rx(struct sk_buff *skb)
 	if (queue->input_pkt_queue.qlen <= netdev_max_backlog) {
 		if (queue->input_pkt_queue.qlen) {
 enqueue:
-			dev_hold(skb->dev);
 			__skb_queue_tail(&queue->input_pkt_queue, skb);
 			local_irq_restore(flags);
 			return NET_RX_SUCCESS;
@@ -1941,22 +1947,6 @@ int netif_rx_ni(struct sk_buff *skb)
 
 EXPORT_SYMBOL(netif_rx_ni);
 
-static inline struct net_device *skb_bond(struct sk_buff *skb)
-{
-	struct net_device *dev = skb->dev;
-
-	if (dev->master) {
-		if (skb_bond_should_drop(skb)) {
-			kfree_skb(skb);
-			return NULL;
-		}
-		skb->dev = dev->master;
-	}
-
-	return dev;
-}
-
-
 static void net_tx_action(struct softirq_action *h)
 {
 	struct softnet_data *sd = &__get_cpu_var(softnet_data);
@@ -1992,15 +1982,22 @@ static void net_tx_action(struct softirq_action *h)
 
 			head = head->next_sched;
 
-			smp_mb__before_clear_bit();
-			clear_bit(__QDISC_STATE_SCHED, &q->state);
-
-			root_lock = qdisc_root_lock(q);
+			root_lock = qdisc_lock(q);
 			if (spin_trylock(root_lock)) {
+				smp_mb__before_clear_bit();
+				clear_bit(__QDISC_STATE_SCHED,
+					  &q->state);
 				qdisc_run(q);
 				spin_unlock(root_lock);
 			} else {
-				__netif_schedule(q);
+				if (!test_bit(__QDISC_STATE_DEACTIVATED,
+					      &q->state)) {
+					__netif_reschedule(q);
+				} else {
+					smp_mb__before_clear_bit();
+					clear_bit(__QDISC_STATE_SCHED,
+						  &q->state);
+				}
 			}
 		}
 	}
@@ -2100,9 +2097,10 @@ static int ing_filter(struct sk_buff *skb)
 	rxq = &dev->rx_queue;
 
 	q = rxq->qdisc;
-	if (q) {
+	if (q != &noop_qdisc) {
 		spin_lock(qdisc_lock(q));
-		result = qdisc_enqueue_root(skb, q);
+		if (likely(!test_bit(__QDISC_STATE_DEACTIVATED, &q->state)))
+			result = qdisc_enqueue_root(skb, q);
 		spin_unlock(qdisc_lock(q));
 	}
 
@@ -2113,7 +2111,7 @@ static inline struct sk_buff *handle_ing(struct sk_buff *skb,
 					 struct packet_type **pt_prev,
 					 int *ret, struct net_device *orig_dev)
 {
-	if (!skb->dev->rx_queue.qdisc)
+	if (skb->dev->rx_queue.qdisc == &noop_qdisc)
 		goto out;
 
 	if (*pt_prev) {
@@ -2183,6 +2181,7 @@ int netif_receive_skb(struct sk_buff *skb)
 {
 	struct packet_type *ptype, *pt_prev;
 	struct net_device *orig_dev;
+	struct net_device *null_or_orig;
 	int ret = NET_RX_DROP;
 	__be16 type;
 
@@ -2196,10 +2195,14 @@ int netif_receive_skb(struct sk_buff *skb)
 	if (!skb->iif)
 		skb->iif = skb->dev->ifindex;
 
-	orig_dev = skb_bond(skb);
-
-	if (!orig_dev)
-		return NET_RX_DROP;
+	null_or_orig = NULL;
+	orig_dev = skb->dev;
+	if (orig_dev->master) {
+		if (skb_bond_should_drop(skb))
+			null_or_orig = orig_dev; /* deliver only exact match */
+		else
+			skb->dev = orig_dev->master;
+	}
 
 	__get_cpu_var(netdev_rx_stat).total++;
 
@@ -2223,7 +2226,8 @@ int netif_receive_skb(struct sk_buff *skb)
 #endif
 
 	list_for_each_entry_rcu(ptype, &ptype_all, list) {
-		if (!ptype->dev || ptype->dev == skb->dev) {
+		if (ptype->dev == null_or_orig || ptype->dev == skb->dev ||
+		    ptype->dev == orig_dev) {
 			if (pt_prev)
 				ret = deliver_skb(skb, pt_prev, orig_dev);
 			pt_prev = ptype;
@@ -2248,7 +2252,8 @@ ncls:
 	list_for_each_entry_rcu(ptype,
 			&ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) {
 		if (ptype->type == type &&
-		    (!ptype->dev || ptype->dev == skb->dev)) {
+		    (ptype->dev == null_or_orig || ptype->dev == skb->dev ||
+		     ptype->dev == orig_dev)) {
 			if (pt_prev)
 				ret = deliver_skb(skb, pt_prev, orig_dev);
 			pt_prev = ptype;
@@ -2270,6 +2275,20 @@ out:
 	return ret;
 }
 
+/* Network device is going away, flush any packets still pending  */
+static void flush_backlog(void *arg)
+{
+	struct net_device *dev = arg;
+	struct softnet_data *queue = &__get_cpu_var(softnet_data);
+	struct sk_buff *skb, *tmp;
+
+	skb_queue_walk_safe(&queue->input_pkt_queue, skb, tmp)
+		if (skb->dev == dev) {
+			__skb_unlink(skb, &queue->input_pkt_queue);
+			kfree_skb(skb);
+		}
+}
+
 static int process_backlog(struct napi_struct *napi, int quota)
 {
 	int work = 0;
@@ -2279,7 +2298,6 @@ static int process_backlog(struct napi_struct *napi, int quota)
 	napi->weight = weight_p;
 	do {
 		struct sk_buff *skb;
-		struct net_device *dev;
 
 		local_irq_disable();
 		skb = __skb_dequeue(&queue->input_pkt_queue);
@@ -2288,14 +2306,9 @@ static int process_backlog(struct napi_struct *napi, int quota)
 			local_irq_enable();
 			break;
 		}
-
 		local_irq_enable();
 
-		dev = skb->dev;
-
 		netif_receive_skb(skb);
-
-		dev_put(dev);
 	} while (++work < quota && jiffies == start_time);
 
 	return work;
@@ -3988,6 +4001,10 @@ int register_netdevice(struct net_device *dev)
 		}
 	}
 
+	/* Enable software GSO if SG is supported. */
+	if (dev->features & NETIF_F_SG)
+		dev->features |= NETIF_F_GSO;
+
 	netdev_initialize_kobject(dev);
 	ret = netdev_register_kobject(dev);
 	if (ret)
@@ -4165,6 +4182,8 @@ void netdev_run_todo(void)
 
 		dev->reg_state = NETREG_UNREGISTERED;
 
+		on_each_cpu(flush_backlog, dev, 1);
+
 		netdev_wait_allrefs(dev);
 
 		/* paranoia */
@@ -4200,6 +4219,7 @@ static void netdev_init_queues(struct net_device *dev)
 {
 	netdev_init_one_queue(dev, &dev->rx_queue, NULL);
 	netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL);
+	spin_lock_init(&dev->tx_global_lock);
 }
 
 /**
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index f62c8af85d3..9d92e41826e 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -2281,6 +2281,7 @@ static struct neighbour *neigh_get_idx(struct seq_file *seq, loff_t *pos)
 	struct neighbour *n = neigh_get_first(seq);
 
 	if (n) {
+		--(*pos);
 		while (*pos) {
 			n = neigh_get_next(seq, n, pos);
 			if (!n)
@@ -2341,6 +2342,7 @@ static struct pneigh_entry *pneigh_get_idx(struct seq_file *seq, loff_t *pos)
 	struct pneigh_entry *pn = pneigh_get_first(seq);
 
 	if (pn) {
+		--(*pos);
 		while (*pos) {
 			pn = pneigh_get_next(seq, pn, pos);
 			if (!pn)
@@ -2354,10 +2356,11 @@ static void *neigh_get_idx_any(struct seq_file *seq, loff_t *pos)
 {
 	struct neigh_seq_state *state = seq->private;
 	void *rc;
+	loff_t idxpos = *pos;
 
-	rc = neigh_get_idx(seq, pos);
+	rc = neigh_get_idx(seq, &idxpos);
 	if (!rc && !(state->flags & NEIGH_SEQ_NEIGH_ONLY))
-		rc = pneigh_get_idx(seq, pos);
+		rc = pneigh_get_idx(seq, &idxpos);
 
 	return rc;
 }
@@ -2366,7 +2369,6 @@ void *neigh_seq_start(struct seq_file *seq, loff_t *pos, struct neigh_table *tbl
 	__acquires(tbl->lock)
 {
 	struct neigh_seq_state *state = seq->private;
-	loff_t pos_minus_one;
 
 	state->tbl = tbl;
 	state->bucket = 0;
@@ -2374,8 +2376,7 @@ void *neigh_seq_start(struct seq_file *seq, loff_t *pos, struct neigh_table *tbl
 
 	read_lock_bh(&tbl->lock);
 
-	pos_minus_one = *pos - 1;
-	return *pos ? neigh_get_idx_any(seq, &pos_minus_one) : SEQ_START_TOKEN;
+	return *pos ? neigh_get_idx_any(seq, pos) : SEQ_START_TOKEN;
 }
 EXPORT_SYMBOL(neigh_seq_start);
 
@@ -2385,7 +2386,7 @@ void *neigh_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	void *rc;
 
 	if (v == SEQ_START_TOKEN) {
-		rc = neigh_get_idx(seq, pos);
+		rc = neigh_get_first(seq);
 		goto out;
 	}
 
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index c12720895ec..6c7af390be0 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -70,6 +70,7 @@ static void queue_process(struct work_struct *work)
 		local_irq_save(flags);
 		__netif_tx_lock(txq, smp_processor_id());
 		if (netif_tx_queue_stopped(txq) ||
+		    netif_tx_queue_frozen(txq) ||
 		    dev->hard_start_xmit(skb, dev) != NETDEV_TX_OK) {
 			skb_queue_head(&npinfo->txq, skb);
 			__netif_tx_unlock(txq);
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index c7d484f7e1c..a756847e381 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -168,7 +168,7 @@
 #include <asm/div64.h>		/* do_div */
 #include <asm/timex.h>
 
-#define VERSION  "pktgen v2.69: Packet Generator for packet performance testing.\n"
+#define VERSION  "pktgen v2.70: Packet Generator for packet performance testing.\n"
 
 #define IP_NAME_SZ 32
 #define MAX_MPLS_LABELS 16 /* This is the max label stack depth */
@@ -189,6 +189,7 @@
 #define F_FLOW_SEQ    (1<<11)	/* Sequential flows */
 #define F_IPSEC_ON    (1<<12)	/* ipsec on for flows */
 #define F_QUEUE_MAP_RND (1<<13)	/* queue map Random */
+#define F_QUEUE_MAP_CPU (1<<14)	/* queue map mirrors smp_processor_id() */
 
 /* Thread control flag bits */
 #define T_TERMINATE   (1<<0)
@@ -621,6 +622,9 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
 	if (pkt_dev->flags & F_QUEUE_MAP_RND)
 		seq_printf(seq,  "QUEUE_MAP_RND  ");
 
+	if (pkt_dev->flags & F_QUEUE_MAP_CPU)
+		seq_printf(seq,  "QUEUE_MAP_CPU  ");
+
 	if (pkt_dev->cflows) {
 		if (pkt_dev->flags & F_FLOW_SEQ)
 			seq_printf(seq,  "FLOW_SEQ  "); /*in sequence flows*/
@@ -1134,6 +1138,12 @@ static ssize_t pktgen_if_write(struct file *file,
 
 		else if (strcmp(f, "!QUEUE_MAP_RND") == 0)
 			pkt_dev->flags &= ~F_QUEUE_MAP_RND;
+
+		else if (strcmp(f, "QUEUE_MAP_CPU") == 0)
+			pkt_dev->flags |= F_QUEUE_MAP_CPU;
+
+		else if (strcmp(f, "!QUEUE_MAP_CPU") == 0)
+			pkt_dev->flags &= ~F_QUEUE_MAP_CPU;
 #ifdef CONFIG_XFRM
 		else if (strcmp(f, "IPSEC") == 0)
 			pkt_dev->flags |= F_IPSEC_ON;
@@ -1895,6 +1905,23 @@ static int pktgen_device_event(struct notifier_block *unused,
 	return NOTIFY_DONE;
 }
 
+static struct net_device *pktgen_dev_get_by_name(struct pktgen_dev *pkt_dev, const char *ifname)
+{
+	char b[IFNAMSIZ+5];
+	int i = 0;
+
+	for(i=0; ifname[i] != '@'; i++) {
+		if(i == IFNAMSIZ)
+			break;
+
+		b[i] = ifname[i];
+	}
+	b[i] = 0;
+
+	return dev_get_by_name(&init_net, b);
+}
+
+
 /* Associate pktgen_dev with a device. */
 
 static int pktgen_setup_dev(struct pktgen_dev *pkt_dev, const char *ifname)
@@ -1908,7 +1935,7 @@ static int pktgen_setup_dev(struct pktgen_dev *pkt_dev, const char *ifname)
 		pkt_dev->odev = NULL;
 	}
 
-	odev = dev_get_by_name(&init_net, ifname);
+	odev = pktgen_dev_get_by_name(pkt_dev, ifname);
 	if (!odev) {
 		printk(KERN_ERR "pktgen: no such netdevice: \"%s\"\n", ifname);
 		return -ENODEV;
@@ -1934,6 +1961,8 @@ static int pktgen_setup_dev(struct pktgen_dev *pkt_dev, const char *ifname)
  */
 static void pktgen_setup_inject(struct pktgen_dev *pkt_dev)
 {
+	int ntxq;
+
 	if (!pkt_dev->odev) {
 		printk(KERN_ERR "pktgen: ERROR: pkt_dev->odev == NULL in "
 		       "setup_inject.\n");
@@ -1942,6 +1971,33 @@ static void pktgen_setup_inject(struct pktgen_dev *pkt_dev)
 		return;
 	}
 
+	/* make sure that we don't pick a non-existing transmit queue */
+	ntxq = pkt_dev->odev->real_num_tx_queues;
+	if (ntxq <= num_online_cpus() && (pkt_dev->flags & F_QUEUE_MAP_CPU)) {
+		printk(KERN_WARNING "pktgen: WARNING: QUEUE_MAP_CPU "
+		       "disabled because CPU count (%d) exceeds number ",
+		       num_online_cpus());
+		printk(KERN_WARNING "pktgen: WARNING: of tx queues "
+		       "(%d) on %s \n", ntxq, pkt_dev->odev->name);
+		pkt_dev->flags &= ~F_QUEUE_MAP_CPU;
+	}
+	if (ntxq <= pkt_dev->queue_map_min) {
+		printk(KERN_WARNING "pktgen: WARNING: Requested "
+		       "queue_map_min (%d) exceeds number of tx\n",
+		       pkt_dev->queue_map_min);
+		printk(KERN_WARNING "pktgen: WARNING: queues (%d) on "
+		       "%s, resetting\n", ntxq, pkt_dev->odev->name);
+		pkt_dev->queue_map_min = ntxq - 1;
+	}
+	if (ntxq <= pkt_dev->queue_map_max) {
+		printk(KERN_WARNING "pktgen: WARNING: Requested "
+		       "queue_map_max (%d) exceeds number of tx\n",
+		       pkt_dev->queue_map_max);
+		printk(KERN_WARNING "pktgen: WARNING: queues (%d) on "
+		       "%s, resetting\n", ntxq, pkt_dev->odev->name);
+		pkt_dev->queue_map_max = ntxq - 1;
+	}
+
 	/* Default to the interface's mac if not explicitly set. */
 
 	if (is_zero_ether_addr(pkt_dev->src_mac))
@@ -2085,15 +2141,19 @@ static inline int f_pick(struct pktgen_dev *pkt_dev)
 		if (pkt_dev->flows[flow].count >= pkt_dev->lflow) {
 			/* reset time */
 			pkt_dev->flows[flow].count = 0;
+			pkt_dev->flows[flow].flags = 0;
 			pkt_dev->curfl += 1;
 			if (pkt_dev->curfl >= pkt_dev->cflows)
 				pkt_dev->curfl = 0; /*reset */
 		}
 	} else {
 		flow = random32() % pkt_dev->cflows;
+		pkt_dev->curfl = flow;
 
-		if (pkt_dev->flows[flow].count > pkt_dev->lflow)
+		if (pkt_dev->flows[flow].count > pkt_dev->lflow) {
 			pkt_dev->flows[flow].count = 0;
+			pkt_dev->flows[flow].flags = 0;
+		}
 	}
 
 	return pkt_dev->curfl;
@@ -2125,7 +2185,11 @@ static void get_ipsec_sa(struct pktgen_dev *pkt_dev, int flow)
 #endif
 static void set_cur_queue_map(struct pktgen_dev *pkt_dev)
 {
-	if (pkt_dev->queue_map_min < pkt_dev->queue_map_max) {
+
+	if (pkt_dev->flags & F_QUEUE_MAP_CPU)
+		pkt_dev->cur_queue_map = smp_processor_id();
+
+	else if (pkt_dev->queue_map_min < pkt_dev->queue_map_max) {
 		__u16 t;
 		if (pkt_dev->flags & F_QUEUE_MAP_RND) {
 			t = random32() %
@@ -2162,7 +2226,7 @@ static void mod_cur_headers(struct pktgen_dev *pkt_dev)
 			mc = random32() % pkt_dev->src_mac_count;
 		else {
 			mc = pkt_dev->cur_src_mac_offset++;
-			if (pkt_dev->cur_src_mac_offset >
+			if (pkt_dev->cur_src_mac_offset >=
 			    pkt_dev->src_mac_count)
 				pkt_dev->cur_src_mac_offset = 0;
 		}
@@ -2189,7 +2253,7 @@ static void mod_cur_headers(struct pktgen_dev *pkt_dev)
 
 		else {
 			mc = pkt_dev->cur_dst_mac_offset++;
-			if (pkt_dev->cur_dst_mac_offset >
+			if (pkt_dev->cur_dst_mac_offset >=
 			    pkt_dev->dst_mac_count) {
 				pkt_dev->cur_dst_mac_offset = 0;
 			}
@@ -3305,6 +3369,7 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
 
 	txq = netdev_get_tx_queue(odev, queue_map);
 	if (netif_tx_queue_stopped(txq) ||
+	    netif_tx_queue_frozen(txq) ||
 	    need_resched()) {
 		idle_start = getCurUs();
 
@@ -3320,7 +3385,8 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
 
 		pkt_dev->idle_acc += getCurUs() - idle_start;
 
-		if (netif_tx_queue_stopped(txq)) {
+		if (netif_tx_queue_stopped(txq) ||
+		    netif_tx_queue_frozen(txq)) {
 			pkt_dev->next_tx_us = getCurUs();	/* TODO */
 			pkt_dev->next_tx_ns = 0;
 			goto out;	/* Try the next interface */
@@ -3352,7 +3418,8 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
 	txq = netdev_get_tx_queue(odev, queue_map);
 
 	__netif_tx_lock_bh(txq);
-	if (!netif_tx_queue_stopped(txq)) {
+	if (!netif_tx_queue_stopped(txq) &&
+	    !netif_tx_queue_frozen(txq)) {
 
 		atomic_inc(&(pkt_dev->skb->users));
 	      retry_now:
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 4e0c9227418..ca1ccdf1ef7 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -485,6 +485,9 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
 	C(head);
 	C(data);
 	C(truesize);
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+	C(do_not_encrypt);
+#endif
 	atomic_set(&n->users, 1);
 
 	atomic_inc(&(skb_shinfo(skb)->dataref));
@@ -2253,14 +2256,7 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 			segs = nskb;
 		tail = nskb;
 
-		nskb->dev = skb->dev;
-		skb_copy_queue_mapping(nskb, skb);
-		nskb->priority = skb->priority;
-		nskb->protocol = skb->protocol;
-		nskb->vlan_tci = skb->vlan_tci;
-		nskb->dst = dst_clone(skb->dst);
-		memcpy(nskb->cb, skb->cb, sizeof(skb->cb));
-		nskb->pkt_type = skb->pkt_type;
+		__copy_skb_header(nskb, skb);
 		nskb->mac_len = skb->mac_len;
 
 		skb_reserve(nskb, headroom);
@@ -2271,6 +2267,7 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 		skb_copy_from_linear_data(skb, skb_put(nskb, doffset),
 					  doffset);
 		if (!sg) {
+			nskb->ip_summed = CHECKSUM_NONE;
 			nskb->csum = skb_copy_and_csum_bits(skb, offset,
 							    skb_put(nskb, len),
 							    len, 0);
@@ -2280,8 +2277,6 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 		frag = skb_shinfo(nskb)->frags;
 		k = 0;
 
-		nskb->ip_summed = CHECKSUM_PARTIAL;
-		nskb->csum = skb->csum;
 		skb_copy_from_linear_data_offset(skb, offset,
 						 skb_put(nskb, hsize), hsize);
 
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index 1c2e3ec2eb5..b4bc6e095a0 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -229,7 +229,8 @@ extern void dccp_v4_send_check(struct sock *sk, int len, struct sk_buff *skb);
 extern int  dccp_retransmit_skb(struct sock *sk);
 
 extern void dccp_send_ack(struct sock *sk);
-extern void dccp_reqsk_send_ack(struct sk_buff *sk, struct request_sock *rsk);
+extern void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
+				struct request_sock *rsk);
 
 extern void dccp_send_sync(struct sock *sk, const u64 seq,
 			   const enum dccp_pkt_type pkt_type);
diff --git a/net/dccp/input.c b/net/dccp/input.c
index df2f110df94..803933ab396 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -411,12 +411,6 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk,
 		struct dccp_sock *dp = dccp_sk(sk);
 		long tstamp = dccp_timestamp();
 
-		/* Stop the REQUEST timer */
-		inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS);
-		WARN_ON(sk->sk_send_head == NULL);
-		__kfree_skb(sk->sk_send_head);
-		sk->sk_send_head = NULL;
-
 		if (!between48(DCCP_SKB_CB(skb)->dccpd_ack_seq,
 			       dp->dccps_awl, dp->dccps_awh)) {
 			dccp_pr_debug("invalid ackno: S.AWL=%llu, "
@@ -441,6 +435,12 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk,
 				    DCCP_ACKVEC_STATE_RECEIVED))
 			goto out_invalid_packet; /* FIXME: change error code */
 
+		/* Stop the REQUEST timer */
+		inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS);
+		WARN_ON(sk->sk_send_head == NULL);
+		kfree_skb(sk->sk_send_head);
+		sk->sk_send_head = NULL;
+
 		dp->dccps_isr = DCCP_SKB_CB(skb)->dccpd_seq;
 		dccp_update_gsr(sk, dp->dccps_isr);
 		/*
diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c
index 66dca5bba85..b2804e2d1b8 100644
--- a/net/dccp/minisocks.c
+++ b/net/dccp/minisocks.c
@@ -296,7 +296,8 @@ int dccp_child_process(struct sock *parent, struct sock *child,
 
 EXPORT_SYMBOL_GPL(dccp_child_process);
 
-void dccp_reqsk_send_ack(struct sk_buff *skb, struct request_sock *rsk)
+void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
+			 struct request_sock *rsk)
 {
 	DCCP_BUG("DCCP-ACK packets are never sent in LISTEN/RESPOND state");
 }
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index b622d974485..1ca3b26eed0 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -474,6 +474,11 @@ static int dccp_setsockopt_change(struct sock *sk, int type,
 
 	if (copy_from_user(&opt, optval, sizeof(opt)))
 		return -EFAULT;
+	/*
+	 * rfc4340: 6.1. Change Options
+	 */
+	if (opt.dccpsf_len < 1)
+		return -EINVAL;
 
 	val = kmalloc(opt.dccpsf_len, GFP_KERNEL);
 	if (!val)
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 91d3d96805d..b12dae2b0b2 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1029,6 +1029,11 @@ skip:
 	}
 }
 
+static inline bool inetdev_valid_mtu(unsigned mtu)
+{
+	return mtu >= 68;
+}
+
 /* Called only under RTNL semaphore */
 
 static int inetdev_event(struct notifier_block *this, unsigned long event,
@@ -1048,6 +1053,10 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 				IN_DEV_CONF_SET(in_dev, NOXFRM, 1);
 				IN_DEV_CONF_SET(in_dev, NOPOLICY, 1);
 			}
+		} else if (event == NETDEV_CHANGEMTU) {
+			/* Re-enabling IP */
+			if (inetdev_valid_mtu(dev->mtu))
+				in_dev = inetdev_init(dev);
 		}
 		goto out;
 	}
@@ -1058,7 +1067,7 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 		dev->ip_ptr = NULL;
 		break;
 	case NETDEV_UP:
-		if (dev->mtu < 68)
+		if (!inetdev_valid_mtu(dev->mtu))
 			break;
 		if (dev->flags & IFF_LOOPBACK) {
 			struct in_ifaddr *ifa;
@@ -1080,9 +1089,9 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 		ip_mc_down(in_dev);
 		break;
 	case NETDEV_CHANGEMTU:
-		if (dev->mtu >= 68)
+		if (inetdev_valid_mtu(dev->mtu))
 			break;
-		/* MTU falled under 68, disable IP */
+		/* disable IP when MTU is not enough */
 	case NETDEV_UNREGISTER:
 		inetdev_destroy(in_dev);
 		break;
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 4e73e5708e7..21515d4c49e 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -575,7 +575,7 @@ static int esp_init_state(struct xfrm_state *x)
 			      crypto_aead_ivsize(aead);
 	if (x->props.mode == XFRM_MODE_TUNNEL)
 		x->props.header_len += sizeof(struct iphdr);
-	else if (x->props.mode == XFRM_MODE_BEET)
+	else if (x->props.mode == XFRM_MODE_BEET && x->sel.family != AF_INET6)
 		x->props.header_len += IPV4_BEET_PHMAXLEN;
 	if (x->encap) {
 		struct xfrm_encap_tmpl *encap = x->encap;
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 860558633b2..55c355e6323 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -204,18 +204,22 @@ static struct sock *icmp_sk(struct net *net)
 	return net->ipv4.icmp_sk[smp_processor_id()];
 }
 
-static inline int icmp_xmit_lock(struct sock *sk)
+static inline struct sock *icmp_xmit_lock(struct net *net)
 {
+	struct sock *sk;
+
 	local_bh_disable();
 
+	sk = icmp_sk(net);
+
 	if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
 		/* This can happen if the output path signals a
 		 * dst_link_failure() for an outgoing ICMP packet.
 		 */
 		local_bh_enable();
-		return 1;
+		return NULL;
 	}
-	return 0;
+	return sk;
 }
 
 static inline void icmp_xmit_unlock(struct sock *sk)
@@ -354,15 +358,17 @@ static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
 	struct ipcm_cookie ipc;
 	struct rtable *rt = skb->rtable;
 	struct net *net = dev_net(rt->u.dst.dev);
-	struct sock *sk = icmp_sk(net);
-	struct inet_sock *inet = inet_sk(sk);
+	struct sock *sk;
+	struct inet_sock *inet;
 	__be32 daddr;
 
 	if (ip_options_echo(&icmp_param->replyopts, skb))
 		return;
 
-	if (icmp_xmit_lock(sk))
+	sk = icmp_xmit_lock(net);
+	if (sk == NULL)
 		return;
+	inet = inet_sk(sk);
 
 	icmp_param->data.icmph.checksum = 0;
 
@@ -419,7 +425,6 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 	if (!rt)
 		goto out;
 	net = dev_net(rt->u.dst.dev);
-	sk = icmp_sk(net);
 
 	/*
 	 *	Find the original header. It is expected to be valid, of course.
@@ -483,7 +488,8 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 		}
 	}
 
-	if (icmp_xmit_lock(sk))
+	sk = icmp_xmit_lock(net);
+	if (sk == NULL)
 		return;
 
 	/*
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 6203ece5360..f70fac61259 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -289,6 +289,7 @@ static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 	struct rtable *rt;
 	struct iphdr *pip;
 	struct igmpv3_report *pig;
+	struct net *net = dev_net(dev);
 
 	skb = alloc_skb(size + LL_ALLOCATED_SPACE(dev), GFP_ATOMIC);
 	if (skb == NULL)
@@ -299,7 +300,7 @@ static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 				    .nl_u = { .ip4_u = {
 				    .daddr = IGMPV3_ALL_MCR } },
 				    .proto = IPPROTO_IGMP };
-		if (ip_route_output_key(&init_net, &rt, &fl)) {
+		if (ip_route_output_key(net, &rt, &fl)) {
 			kfree_skb(skb);
 			return NULL;
 		}
@@ -629,6 +630,7 @@ static int igmp_send_report(struct in_device *in_dev, struct ip_mc_list *pmc,
 	struct igmphdr *ih;
 	struct rtable *rt;
 	struct net_device *dev = in_dev->dev;
+	struct net *net = dev_net(dev);
 	__be32	group = pmc ? pmc->multiaddr : 0;
 	__be32	dst;
 
@@ -643,7 +645,7 @@ static int igmp_send_report(struct in_device *in_dev, struct ip_mc_list *pmc,
 		struct flowi fl = { .oif = dev->ifindex,
 				    .nl_u = { .ip4_u = { .daddr = dst } },
 				    .proto = IPPROTO_IGMP };
-		if (ip_route_output_key(&init_net, &rt, &fl))
+		if (ip_route_output_key(net, &rt, &fl))
 			return -1;
 	}
 	if (rt->rt_src == 0) {
@@ -1196,9 +1198,6 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr)
 
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	for (im=in_dev->mc_list; im; im=im->next) {
 		if (im->multiaddr == addr) {
 			im->users++;
@@ -1278,9 +1277,6 @@ void ip_mc_dec_group(struct in_device *in_dev, __be32 addr)
 
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	for (ip=&in_dev->mc_list; (i=*ip)!=NULL; ip=&i->next) {
 		if (i->multiaddr==addr) {
 			if (--i->users == 0) {
@@ -1308,9 +1304,6 @@ void ip_mc_down(struct in_device *in_dev)
 
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	for (i=in_dev->mc_list; i; i=i->next)
 		igmp_group_dropped(i);
 
@@ -1331,9 +1324,6 @@ void ip_mc_init_dev(struct in_device *in_dev)
 {
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	in_dev->mc_tomb = NULL;
 #ifdef CONFIG_IP_MULTICAST
 	in_dev->mr_gq_running = 0;
@@ -1357,9 +1347,6 @@ void ip_mc_up(struct in_device *in_dev)
 
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	ip_mc_inc_group(in_dev, IGMP_ALL_HOSTS);
 
 	for (i=in_dev->mc_list; i; i=i->next)
@@ -1376,9 +1363,6 @@ void ip_mc_destroy_dev(struct in_device *in_dev)
 
 	ASSERT_RTNL();
 
-	if (!net_eq(dev_net(in_dev->dev), &init_net))
-		return;
-
 	/* Deactivate timers */
 	ip_mc_down(in_dev);
 
@@ -1395,7 +1379,7 @@ void ip_mc_destroy_dev(struct in_device *in_dev)
 	write_unlock_bh(&in_dev->mc_list_lock);
 }
 
-static struct in_device * ip_mc_find_dev(struct ip_mreqn *imr)
+static struct in_device *ip_mc_find_dev(struct net *net, struct ip_mreqn *imr)
 {
 	struct flowi fl = { .nl_u = { .ip4_u =
 				      { .daddr = imr->imr_multiaddr.s_addr } } };
@@ -1404,19 +1388,19 @@ static struct in_device * ip_mc_find_dev(struct ip_mreqn *imr)
 	struct in_device *idev = NULL;
 
 	if (imr->imr_ifindex) {
-		idev = inetdev_by_index(&init_net, imr->imr_ifindex);
+		idev = inetdev_by_index(net, imr->imr_ifindex);
 		if (idev)
 			__in_dev_put(idev);
 		return idev;
 	}
 	if (imr->imr_address.s_addr) {
-		dev = ip_dev_find(&init_net, imr->imr_address.s_addr);
+		dev = ip_dev_find(net, imr->imr_address.s_addr);
 		if (!dev)
 			return NULL;
 		dev_put(dev);
 	}
 
-	if (!dev && !ip_route_output_key(&init_net, &rt, &fl)) {
+	if (!dev && !ip_route_output_key(net, &rt, &fl)) {
 		dev = rt->u.dst.dev;
 		ip_rt_put(rt);
 	}
@@ -1754,18 +1738,16 @@ int ip_mc_join_group(struct sock *sk , struct ip_mreqn *imr)
 	struct ip_mc_socklist *iml=NULL, *i;
 	struct in_device *in_dev;
 	struct inet_sock *inet = inet_sk(sk);
+	struct net *net = sock_net(sk);
 	int ifindex;
 	int count = 0;
 
 	if (!ipv4_is_multicast(addr))
 		return -EINVAL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
 
-	in_dev = ip_mc_find_dev(imr);
+	in_dev = ip_mc_find_dev(net, imr);
 
 	if (!in_dev) {
 		iml = NULL;
@@ -1827,15 +1809,13 @@ int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr)
 	struct inet_sock *inet = inet_sk(sk);
 	struct ip_mc_socklist *iml, **imlp;
 	struct in_device *in_dev;
+	struct net *net = sock_net(sk);
 	__be32 group = imr->imr_multiaddr.s_addr;
 	u32 ifindex;
 	int ret = -EADDRNOTAVAIL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
-	in_dev = ip_mc_find_dev(imr);
+	in_dev = ip_mc_find_dev(net, imr);
 	ifindex = imr->imr_ifindex;
 	for (imlp = &inet->mc_list; (iml = *imlp) != NULL; imlp = &iml->next) {
 		if (iml->multi.imr_multiaddr.s_addr != group)
@@ -1873,21 +1853,19 @@ int ip_mc_source(int add, int omode, struct sock *sk, struct
 	struct in_device *in_dev = NULL;
 	struct inet_sock *inet = inet_sk(sk);
 	struct ip_sf_socklist *psl;
+	struct net *net = sock_net(sk);
 	int leavegroup = 0;
 	int i, j, rv;
 
 	if (!ipv4_is_multicast(addr))
 		return -EINVAL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
 
 	imr.imr_multiaddr.s_addr = mreqs->imr_multiaddr;
 	imr.imr_address.s_addr = mreqs->imr_interface;
 	imr.imr_ifindex = ifindex;
-	in_dev = ip_mc_find_dev(&imr);
+	in_dev = ip_mc_find_dev(net, &imr);
 
 	if (!in_dev) {
 		err = -ENODEV;
@@ -2007,6 +1985,7 @@ int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf, int ifindex)
 	struct in_device *in_dev;
 	struct inet_sock *inet = inet_sk(sk);
 	struct ip_sf_socklist *newpsl, *psl;
+	struct net *net = sock_net(sk);
 	int leavegroup = 0;
 
 	if (!ipv4_is_multicast(addr))
@@ -2015,15 +1994,12 @@ int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf, int ifindex)
 	    msf->imsf_fmode != MCAST_EXCLUDE)
 		return -EINVAL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
 
 	imr.imr_multiaddr.s_addr = msf->imsf_multiaddr;
 	imr.imr_address.s_addr = msf->imsf_interface;
 	imr.imr_ifindex = ifindex;
-	in_dev = ip_mc_find_dev(&imr);
+	in_dev = ip_mc_find_dev(net, &imr);
 
 	if (!in_dev) {
 		err = -ENODEV;
@@ -2094,19 +2070,17 @@ int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
 	struct in_device *in_dev;
 	struct inet_sock *inet = inet_sk(sk);
 	struct ip_sf_socklist *psl;
+	struct net *net = sock_net(sk);
 
 	if (!ipv4_is_multicast(addr))
 		return -EINVAL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
 
 	imr.imr_multiaddr.s_addr = msf->imsf_multiaddr;
 	imr.imr_address.s_addr = msf->imsf_interface;
 	imr.imr_ifindex = 0;
-	in_dev = ip_mc_find_dev(&imr);
+	in_dev = ip_mc_find_dev(net, &imr);
 
 	if (!in_dev) {
 		err = -ENODEV;
@@ -2163,9 +2137,6 @@ int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
 	if (!ipv4_is_multicast(addr))
 		return -EINVAL;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return -EPROTONOSUPPORT;
-
 	rtnl_lock();
 
 	err = -EADDRNOTAVAIL;
@@ -2246,19 +2217,17 @@ void ip_mc_drop_socket(struct sock *sk)
 {
 	struct inet_sock *inet = inet_sk(sk);
 	struct ip_mc_socklist *iml;
+	struct net *net = sock_net(sk);
 
 	if (inet->mc_list == NULL)
 		return;
 
-	if (!net_eq(sock_net(sk), &init_net))
-		return;
-
 	rtnl_lock();
 	while ((iml = inet->mc_list) != NULL) {
 		struct in_device *in_dev;
 		inet->mc_list = iml->next;
 
-		in_dev = inetdev_by_index(&init_net, iml->multi.imr_ifindex);
+		in_dev = inetdev_by_index(net, iml->multi.imr_ifindex);
 		(void) ip_mc_leave_src(sk, iml, in_dev);
 		if (in_dev != NULL) {
 			ip_mc_dec_group(in_dev, iml->multi.imr_multiaddr.s_addr);
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index d985bd613d2..743f011b9a8 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -409,3 +409,38 @@ out:
 }
 
 EXPORT_SYMBOL_GPL(inet_twdr_twcal_tick);
+
+void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo,
+		     struct inet_timewait_death_row *twdr, int family)
+{
+	struct inet_timewait_sock *tw;
+	struct sock *sk;
+	struct hlist_node *node;
+	int h;
+
+	local_bh_disable();
+	for (h = 0; h < (hashinfo->ehash_size); h++) {
+		struct inet_ehash_bucket *head =
+			inet_ehash_bucket(hashinfo, h);
+		rwlock_t *lock = inet_ehash_lockp(hashinfo, h);
+restart:
+		write_lock(lock);
+		sk_for_each(sk, node, &head->twchain) {
+
+			tw = inet_twsk(sk);
+			if (!net_eq(twsk_net(tw), net) ||
+			    tw->tw_family != family)
+				continue;
+
+			atomic_inc(&tw->tw_refcnt);
+			write_unlock(lock);
+			inet_twsk_deschedule(tw, twdr);
+			inet_twsk_put(tw);
+
+			goto restart;
+		}
+		write_unlock(lock);
+	}
+	local_bh_enable();
+}
+EXPORT_SYMBOL_GPL(inet_twsk_purge);
diff --git a/net/ipv4/ipvs/ip_vs_app.c b/net/ipv4/ipvs/ip_vs_app.c
index 1f1897a1a70..201b8ea3020 100644
--- a/net/ipv4/ipvs/ip_vs_app.c
+++ b/net/ipv4/ipvs/ip_vs_app.c
@@ -608,7 +608,7 @@ int ip_vs_skb_replace(struct sk_buff *skb, gfp_t pri,
 }
 
 
-int ip_vs_app_init(void)
+int __init ip_vs_app_init(void)
 {
 	/* we will replace it with proc_net_ipvs_create() soon */
 	proc_net_fops_create(&init_net, "ip_vs_app", 0, &ip_vs_app_fops);
diff --git a/net/ipv4/ipvs/ip_vs_conn.c b/net/ipv4/ipvs/ip_vs_conn.c
index f8bdae47a77..44a6872dc24 100644
--- a/net/ipv4/ipvs/ip_vs_conn.c
+++ b/net/ipv4/ipvs/ip_vs_conn.c
@@ -965,7 +965,7 @@ static void ip_vs_conn_flush(void)
 }
 
 
-int ip_vs_conn_init(void)
+int __init ip_vs_conn_init(void)
 {
 	int idx;
 
diff --git a/net/ipv4/ipvs/ip_vs_ctl.c b/net/ipv4/ipvs/ip_vs_ctl.c
index 9a5ace0b4dd..6379705a8dc 100644
--- a/net/ipv4/ipvs/ip_vs_ctl.c
+++ b/net/ipv4/ipvs/ip_vs_ctl.c
@@ -683,9 +683,22 @@ static void
 ip_vs_zero_stats(struct ip_vs_stats *stats)
 {
 	spin_lock_bh(&stats->lock);
-	memset(stats, 0, (char *)&stats->lock - (char *)stats);
-	spin_unlock_bh(&stats->lock);
+
+	stats->conns = 0;
+	stats->inpkts = 0;
+	stats->outpkts = 0;
+	stats->inbytes = 0;
+	stats->outbytes = 0;
+
+	stats->cps = 0;
+	stats->inpps = 0;
+	stats->outpps = 0;
+	stats->inbps = 0;
+	stats->outbps = 0;
+
 	ip_vs_zero_estimator(stats);
+
+	spin_unlock_bh(&stats->lock);
 }
 
 /*
@@ -1589,7 +1602,7 @@ static struct ctl_table vs_vars[] = {
 	{ .ctl_name = 0 }
 };
 
-struct ctl_path net_vs_ctl_path[] = {
+const struct ctl_path net_vs_ctl_path[] = {
 	{ .procname = "net", .ctl_name = CTL_NET, },
 	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
 	{ .procname = "vs", },
@@ -1784,7 +1797,9 @@ static const struct file_operations ip_vs_info_fops = {
 
 #endif
 
-struct ip_vs_stats ip_vs_stats;
+struct ip_vs_stats ip_vs_stats = {
+	.lock = __SPIN_LOCK_UNLOCKED(ip_vs_stats.lock),
+};
 
 #ifdef CONFIG_PROC_FS
 static int ip_vs_stats_show(struct seq_file *seq, void *v)
@@ -2306,7 +2321,7 @@ static struct nf_sockopt_ops ip_vs_sockopts = {
 };
 
 
-int ip_vs_control_init(void)
+int __init ip_vs_control_init(void)
 {
 	int ret;
 	int idx;
@@ -2333,8 +2348,6 @@ int ip_vs_control_init(void)
 		INIT_LIST_HEAD(&ip_vs_rtable[idx]);
 	}
 
-	memset(&ip_vs_stats, 0, sizeof(ip_vs_stats));
-	spin_lock_init(&ip_vs_stats.lock);
 	ip_vs_new_estimator(&ip_vs_stats);
 
 	/* Hook the defense timer */
diff --git a/net/ipv4/ipvs/ip_vs_dh.c b/net/ipv4/ipvs/ip_vs_dh.c
index 8afc1503ed2..fa66824d264 100644
--- a/net/ipv4/ipvs/ip_vs_dh.c
+++ b/net/ipv4/ipvs/ip_vs_dh.c
@@ -233,6 +233,7 @@ static struct ip_vs_scheduler ip_vs_dh_scheduler =
 	.name =			"dh",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_dh_scheduler.n_list),
 	.init_service =		ip_vs_dh_init_svc,
 	.done_service =		ip_vs_dh_done_svc,
 	.update_service =	ip_vs_dh_update_svc,
@@ -242,7 +243,6 @@ static struct ip_vs_scheduler ip_vs_dh_scheduler =
 
 static int __init ip_vs_dh_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_dh_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_dh_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_est.c b/net/ipv4/ipvs/ip_vs_est.c
index bc04eedd6db..5a20f93bd7f 100644
--- a/net/ipv4/ipvs/ip_vs_est.c
+++ b/net/ipv4/ipvs/ip_vs_est.c
@@ -17,6 +17,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/sysctl.h>
+#include <linux/list.h>
 
 #include <net/ip_vs.h>
 
@@ -44,28 +45,11 @@
  */
 
 
-struct ip_vs_estimator
-{
-	struct ip_vs_estimator	*next;
-	struct ip_vs_stats	*stats;
-
-	u32			last_conns;
-	u32			last_inpkts;
-	u32			last_outpkts;
-	u64			last_inbytes;
-	u64			last_outbytes;
-
-	u32			cps;
-	u32			inpps;
-	u32			outpps;
-	u32			inbps;
-	u32			outbps;
-};
-
+static void estimation_timer(unsigned long arg);
 
-static struct ip_vs_estimator *est_list = NULL;
-static DEFINE_RWLOCK(est_lock);
-static struct timer_list est_timer;
+static LIST_HEAD(est_list);
+static DEFINE_SPINLOCK(est_lock);
+static DEFINE_TIMER(est_timer, estimation_timer, 0, 0);
 
 static void estimation_timer(unsigned long arg)
 {
@@ -76,9 +60,9 @@ static void estimation_timer(unsigned long arg)
 	u64 n_inbytes, n_outbytes;
 	u32 rate;
 
-	read_lock(&est_lock);
-	for (e = est_list; e; e = e->next) {
-		s = e->stats;
+	spin_lock(&est_lock);
+	list_for_each_entry(e, &est_list, list) {
+		s = container_of(e, struct ip_vs_stats, est);
 
 		spin_lock(&s->lock);
 		n_conns = s->conns;
@@ -114,19 +98,16 @@ static void estimation_timer(unsigned long arg)
 		s->outbps = (e->outbps+0xF)>>5;
 		spin_unlock(&s->lock);
 	}
-	read_unlock(&est_lock);
+	spin_unlock(&est_lock);
 	mod_timer(&est_timer, jiffies + 2*HZ);
 }
 
-int ip_vs_new_estimator(struct ip_vs_stats *stats)
+void ip_vs_new_estimator(struct ip_vs_stats *stats)
 {
-	struct ip_vs_estimator *est;
+	struct ip_vs_estimator *est = &stats->est;
 
-	est = kzalloc(sizeof(*est), GFP_KERNEL);
-	if (est == NULL)
-		return -ENOMEM;
+	INIT_LIST_HEAD(&est->list);
 
-	est->stats = stats;
 	est->last_conns = stats->conns;
 	est->cps = stats->cps<<10;
 
@@ -142,59 +123,40 @@ int ip_vs_new_estimator(struct ip_vs_stats *stats)
 	est->last_outbytes = stats->outbytes;
 	est->outbps = stats->outbps<<5;
 
-	write_lock_bh(&est_lock);
-	est->next = est_list;
-	if (est->next == NULL) {
-		setup_timer(&est_timer, estimation_timer, 0);
-		est_timer.expires = jiffies + 2*HZ;
-		add_timer(&est_timer);
-	}
-	est_list = est;
-	write_unlock_bh(&est_lock);
-	return 0;
+	spin_lock_bh(&est_lock);
+	if (list_empty(&est_list))
+		mod_timer(&est_timer, jiffies + 2 * HZ);
+	list_add(&est->list, &est_list);
+	spin_unlock_bh(&est_lock);
 }
 
 void ip_vs_kill_estimator(struct ip_vs_stats *stats)
 {
-	struct ip_vs_estimator *est, **pest;
-	int killed = 0;
-
-	write_lock_bh(&est_lock);
-	pest = &est_list;
-	while ((est=*pest) != NULL) {
-		if (est->stats != stats) {
-			pest = &est->next;
-			continue;
-		}
-		*pest = est->next;
-		kfree(est);
-		killed++;
+	struct ip_vs_estimator *est = &stats->est;
+
+	spin_lock_bh(&est_lock);
+	list_del(&est->list);
+	while (list_empty(&est_list) && try_to_del_timer_sync(&est_timer) < 0) {
+		spin_unlock_bh(&est_lock);
+		cpu_relax();
+		spin_lock_bh(&est_lock);
 	}
-	if (killed && est_list == NULL)
-		del_timer_sync(&est_timer);
-	write_unlock_bh(&est_lock);
+	spin_unlock_bh(&est_lock);
 }
 
 void ip_vs_zero_estimator(struct ip_vs_stats *stats)
 {
-	struct ip_vs_estimator *e;
-
-	write_lock_bh(&est_lock);
-	for (e = est_list; e; e = e->next) {
-		if (e->stats != stats)
-			continue;
-
-		/* set counters zero */
-		e->last_conns = 0;
-		e->last_inpkts = 0;
-		e->last_outpkts = 0;
-		e->last_inbytes = 0;
-		e->last_outbytes = 0;
-		e->cps = 0;
-		e->inpps = 0;
-		e->outpps = 0;
-		e->inbps = 0;
-		e->outbps = 0;
-	}
-	write_unlock_bh(&est_lock);
+	struct ip_vs_estimator *est = &stats->est;
+
+	/* set counters zero, caller must hold the stats->lock lock */
+	est->last_inbytes = 0;
+	est->last_outbytes = 0;
+	est->last_conns = 0;
+	est->last_inpkts = 0;
+	est->last_outpkts = 0;
+	est->cps = 0;
+	est->inpps = 0;
+	est->outpps = 0;
+	est->inbps = 0;
+	est->outbps = 0;
 }
diff --git a/net/ipv4/ipvs/ip_vs_lblc.c b/net/ipv4/ipvs/ip_vs_lblc.c
index 0efa3db4b18..7a6a319f544 100644
--- a/net/ipv4/ipvs/ip_vs_lblc.c
+++ b/net/ipv4/ipvs/ip_vs_lblc.c
@@ -539,6 +539,7 @@ static struct ip_vs_scheduler ip_vs_lblc_scheduler =
 	.name =			"lblc",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_lblc_scheduler.n_list),
 	.init_service =		ip_vs_lblc_init_svc,
 	.done_service =		ip_vs_lblc_done_svc,
 	.update_service =	ip_vs_lblc_update_svc,
@@ -550,7 +551,6 @@ static int __init ip_vs_lblc_init(void)
 {
 	int ret;
 
-	INIT_LIST_HEAD(&ip_vs_lblc_scheduler.n_list);
 	sysctl_header = register_sysctl_paths(net_vs_ctl_path, vs_vars_table);
 	ret = register_ip_vs_scheduler(&ip_vs_lblc_scheduler);
 	if (ret)
diff --git a/net/ipv4/ipvs/ip_vs_lblcr.c b/net/ipv4/ipvs/ip_vs_lblcr.c
index 8e3bbeb4513..c234e73968a 100644
--- a/net/ipv4/ipvs/ip_vs_lblcr.c
+++ b/net/ipv4/ipvs/ip_vs_lblcr.c
@@ -728,6 +728,7 @@ static struct ip_vs_scheduler ip_vs_lblcr_scheduler =
 	.name =			"lblcr",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_lblcr_scheduler.n_list),
 	.init_service =		ip_vs_lblcr_init_svc,
 	.done_service =		ip_vs_lblcr_done_svc,
 	.update_service =	ip_vs_lblcr_update_svc,
@@ -739,7 +740,6 @@ static int __init ip_vs_lblcr_init(void)
 {
 	int ret;
 
-	INIT_LIST_HEAD(&ip_vs_lblcr_scheduler.n_list);
 	sysctl_header = register_sysctl_paths(net_vs_ctl_path, vs_vars_table);
 	ret = register_ip_vs_scheduler(&ip_vs_lblcr_scheduler);
 	if (ret)
diff --git a/net/ipv4/ipvs/ip_vs_lc.c b/net/ipv4/ipvs/ip_vs_lc.c
index ac9f08e065d..ebcdbf75ac6 100644
--- a/net/ipv4/ipvs/ip_vs_lc.c
+++ b/net/ipv4/ipvs/ip_vs_lc.c
@@ -98,6 +98,7 @@ static struct ip_vs_scheduler ip_vs_lc_scheduler = {
 	.name =			"lc",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_lc_scheduler.n_list),
 	.init_service =		ip_vs_lc_init_svc,
 	.done_service =		ip_vs_lc_done_svc,
 	.update_service =	ip_vs_lc_update_svc,
@@ -107,7 +108,6 @@ static struct ip_vs_scheduler ip_vs_lc_scheduler = {
 
 static int __init ip_vs_lc_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_lc_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_lc_scheduler) ;
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_nq.c b/net/ipv4/ipvs/ip_vs_nq.c
index a46bf258d42..92f3a677003 100644
--- a/net/ipv4/ipvs/ip_vs_nq.c
+++ b/net/ipv4/ipvs/ip_vs_nq.c
@@ -136,6 +136,7 @@ static struct ip_vs_scheduler ip_vs_nq_scheduler =
 	.name =			"nq",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_nq_scheduler.n_list),
 	.init_service =		ip_vs_nq_init_svc,
 	.done_service =		ip_vs_nq_done_svc,
 	.update_service =	ip_vs_nq_update_svc,
@@ -145,7 +146,6 @@ static struct ip_vs_scheduler ip_vs_nq_scheduler =
 
 static int __init ip_vs_nq_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_nq_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_nq_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_proto.c b/net/ipv4/ipvs/ip_vs_proto.c
index 876714f23d6..6099a88fc20 100644
--- a/net/ipv4/ipvs/ip_vs_proto.c
+++ b/net/ipv4/ipvs/ip_vs_proto.c
@@ -43,7 +43,7 @@ static struct ip_vs_protocol *ip_vs_proto_table[IP_VS_PROTO_TAB_SIZE];
 /*
  *	register an ipvs protocol
  */
-static int __used register_ip_vs_protocol(struct ip_vs_protocol *pp)
+static int __used __init register_ip_vs_protocol(struct ip_vs_protocol *pp)
 {
 	unsigned hash = IP_VS_PROTO_HASH(pp->protocol);
 
@@ -190,7 +190,7 @@ ip_vs_tcpudp_debug_packet(struct ip_vs_protocol *pp,
 }
 
 
-int ip_vs_protocol_init(void)
+int __init ip_vs_protocol_init(void)
 {
 	char protocols[64];
 #define REGISTER_PROTOCOL(p)			\
diff --git a/net/ipv4/ipvs/ip_vs_rr.c b/net/ipv4/ipvs/ip_vs_rr.c
index c8db12d39e6..358110d17e5 100644
--- a/net/ipv4/ipvs/ip_vs_rr.c
+++ b/net/ipv4/ipvs/ip_vs_rr.c
@@ -94,6 +94,7 @@ static struct ip_vs_scheduler ip_vs_rr_scheduler = {
 	.name =			"rr",			/* name */
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_rr_scheduler.n_list),
 	.init_service =		ip_vs_rr_init_svc,
 	.done_service =		ip_vs_rr_done_svc,
 	.update_service =	ip_vs_rr_update_svc,
@@ -102,7 +103,6 @@ static struct ip_vs_scheduler ip_vs_rr_scheduler = {
 
 static int __init ip_vs_rr_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_rr_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_rr_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_sched.c b/net/ipv4/ipvs/ip_vs_sched.c
index b6476730985..a46ad9e3501 100644
--- a/net/ipv4/ipvs/ip_vs_sched.c
+++ b/net/ipv4/ipvs/ip_vs_sched.c
@@ -184,7 +184,7 @@ int register_ip_vs_scheduler(struct ip_vs_scheduler *scheduler)
 
 	write_lock_bh(&__ip_vs_sched_lock);
 
-	if (scheduler->n_list.next != &scheduler->n_list) {
+	if (!list_empty(&scheduler->n_list)) {
 		write_unlock_bh(&__ip_vs_sched_lock);
 		ip_vs_use_count_dec();
 		IP_VS_ERR("register_ip_vs_scheduler(): [%s] scheduler "
@@ -229,7 +229,7 @@ int unregister_ip_vs_scheduler(struct ip_vs_scheduler *scheduler)
 	}
 
 	write_lock_bh(&__ip_vs_sched_lock);
-	if (scheduler->n_list.next == &scheduler->n_list) {
+	if (list_empty(&scheduler->n_list)) {
 		write_unlock_bh(&__ip_vs_sched_lock);
 		IP_VS_ERR("unregister_ip_vs_scheduler(): [%s] scheduler "
 			  "is not in the list. failed\n", scheduler->name);
diff --git a/net/ipv4/ipvs/ip_vs_sed.c b/net/ipv4/ipvs/ip_vs_sed.c
index 2a7d3135818..77663d84cbd 100644
--- a/net/ipv4/ipvs/ip_vs_sed.c
+++ b/net/ipv4/ipvs/ip_vs_sed.c
@@ -138,6 +138,7 @@ static struct ip_vs_scheduler ip_vs_sed_scheduler =
 	.name =			"sed",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_sed_scheduler.n_list),
 	.init_service =		ip_vs_sed_init_svc,
 	.done_service =		ip_vs_sed_done_svc,
 	.update_service =	ip_vs_sed_update_svc,
@@ -147,7 +148,6 @@ static struct ip_vs_scheduler ip_vs_sed_scheduler =
 
 static int __init ip_vs_sed_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_sed_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_sed_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_sh.c b/net/ipv4/ipvs/ip_vs_sh.c
index b8fdfac6500..7b979e22805 100644
--- a/net/ipv4/ipvs/ip_vs_sh.c
+++ b/net/ipv4/ipvs/ip_vs_sh.c
@@ -230,6 +230,7 @@ static struct ip_vs_scheduler ip_vs_sh_scheduler =
 	.name =			"sh",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list	 =		LIST_HEAD_INIT(ip_vs_sh_scheduler.n_list),
 	.init_service =		ip_vs_sh_init_svc,
 	.done_service =		ip_vs_sh_done_svc,
 	.update_service =	ip_vs_sh_update_svc,
@@ -239,7 +240,6 @@ static struct ip_vs_scheduler ip_vs_sh_scheduler =
 
 static int __init ip_vs_sh_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_sh_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_sh_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_sync.c b/net/ipv4/ipvs/ip_vs_sync.c
index 45e9bd96c28..a652da2c320 100644
--- a/net/ipv4/ipvs/ip_vs_sync.c
+++ b/net/ipv4/ipvs/ip_vs_sync.c
@@ -904,9 +904,9 @@ int stop_sync_thread(int state)
 		 * progress of stopping the master sync daemon.
 		 */
 
-		spin_lock(&ip_vs_sync_lock);
+		spin_lock_bh(&ip_vs_sync_lock);
 		ip_vs_sync_state &= ~IP_VS_STATE_MASTER;
-		spin_unlock(&ip_vs_sync_lock);
+		spin_unlock_bh(&ip_vs_sync_lock);
 		kthread_stop(sync_master_thread);
 		sync_master_thread = NULL;
 	} else if (state == IP_VS_STATE_BACKUP) {
diff --git a/net/ipv4/ipvs/ip_vs_wlc.c b/net/ipv4/ipvs/ip_vs_wlc.c
index 772c3cb4eca..9b0ef86bb1f 100644
--- a/net/ipv4/ipvs/ip_vs_wlc.c
+++ b/net/ipv4/ipvs/ip_vs_wlc.c
@@ -126,6 +126,7 @@ static struct ip_vs_scheduler ip_vs_wlc_scheduler =
 	.name =			"wlc",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_wlc_scheduler.n_list),
 	.init_service =		ip_vs_wlc_init_svc,
 	.done_service =		ip_vs_wlc_done_svc,
 	.update_service =	ip_vs_wlc_update_svc,
@@ -135,7 +136,6 @@ static struct ip_vs_scheduler ip_vs_wlc_scheduler =
 
 static int __init ip_vs_wlc_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_wlc_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_wlc_scheduler);
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_wrr.c b/net/ipv4/ipvs/ip_vs_wrr.c
index 1d6932d7dc9..0d86a79b87b 100644
--- a/net/ipv4/ipvs/ip_vs_wrr.c
+++ b/net/ipv4/ipvs/ip_vs_wrr.c
@@ -212,6 +212,7 @@ static struct ip_vs_scheduler ip_vs_wrr_scheduler = {
 	.name =			"wrr",
 	.refcnt =		ATOMIC_INIT(0),
 	.module =		THIS_MODULE,
+	.n_list =		LIST_HEAD_INIT(ip_vs_wrr_scheduler.n_list),
 	.init_service =		ip_vs_wrr_init_svc,
 	.done_service =		ip_vs_wrr_done_svc,
 	.update_service =	ip_vs_wrr_update_svc,
@@ -220,7 +221,6 @@ static struct ip_vs_scheduler ip_vs_wrr_scheduler = {
 
 static int __init ip_vs_wrr_init(void)
 {
-	INIT_LIST_HEAD(&ip_vs_wrr_scheduler.n_list);
 	return register_ip_vs_scheduler(&ip_vs_wrr_scheduler) ;
 }
 
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index 1819ad7ab91..fafe8ebb4c5 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -475,11 +475,10 @@ static void arp_print(struct arp_payload *payload)
 #define HBUFFERLEN 30
 	char hbuffer[HBUFFERLEN];
 	int j,k;
-	const char hexbuf[]= "0123456789abcdef";
 
 	for (k=0, j=0; k < HBUFFERLEN-3 && j < ETH_ALEN; j++) {
-		hbuffer[k++]=hexbuf[(payload->src_hw[j]>>4)&15];
-		hbuffer[k++]=hexbuf[payload->src_hw[j]&15];
+		hbuffer[k++] = hex_asc_hi(payload->src_hw[j]);
+		hbuffer[k++] = hex_asc_lo(payload->src_hw[j]);
 		hbuffer[k++]=':';
 	}
 	hbuffer[--k]='\0';
diff --git a/net/ipv4/netfilter/ipt_addrtype.c b/net/ipv4/netfilter/ipt_addrtype.c
index 49587a49722..462a22c9787 100644
--- a/net/ipv4/netfilter/ipt_addrtype.c
+++ b/net/ipv4/netfilter/ipt_addrtype.c
@@ -70,7 +70,7 @@ addrtype_mt_v1(const struct sk_buff *skb, const struct net_device *in,
 		       (info->flags & IPT_ADDRTYPE_INVERT_SOURCE);
 	if (ret && info->dest)
 		ret &= match_type(dev, iph->daddr, info->dest) ^
-		       (info->flags & IPT_ADDRTYPE_INVERT_DEST);
+		       !!(info->flags & IPT_ADDRTYPE_INVERT_DEST);
 	return ret;
 }
 
diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c
index 21cb053f5d7..3974d7cae5c 100644
--- a/net/ipv4/netfilter/ipt_recent.c
+++ b/net/ipv4/netfilter/ipt_recent.c
@@ -305,10 +305,10 @@ static void recent_mt_destroy(const struct xt_match *match, void *matchinfo)
 		spin_lock_bh(&recent_lock);
 		list_del(&t->list);
 		spin_unlock_bh(&recent_lock);
-		recent_table_flush(t);
 #ifdef CONFIG_PROC_FS
 		remove_proc_entry(t->name, proc_dir);
 #endif
+		recent_table_flush(t);
 		kfree(t);
 	}
 	mutex_unlock(&recent_mutex);
diff --git a/net/ipv4/netfilter/nf_nat_proto_common.c b/net/ipv4/netfilter/nf_nat_proto_common.c
index 91537f11273..6c4f11f5144 100644
--- a/net/ipv4/netfilter/nf_nat_proto_common.c
+++ b/net/ipv4/netfilter/nf_nat_proto_common.c
@@ -73,9 +73,13 @@ bool nf_nat_proto_unique_tuple(struct nf_conntrack_tuple *tuple,
 		range_size = ntohs(range->max.all) - min + 1;
 	}
 
-	off = *rover;
 	if (range->flags & IP_NAT_RANGE_PROTO_RANDOM)
-		off = net_random();
+		off = secure_ipv4_port_ephemeral(tuple->src.u3.ip, tuple->dst.u3.ip,
+						 maniptype == IP_NAT_MANIP_SRC
+						 ? tuple->dst.u.all
+						 : tuple->src.u.all);
+	else
+		off = *rover;
 
 	for (i = 0; i < range_size; i++, off++) {
 		*portptr = htons(min + off % range_size);
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 834356ea99d..8f5a403f6f6 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -232,6 +232,8 @@ static const struct snmp_mib snmp4_net_list[] = {
 	SNMP_MIB_ITEM("TCPDSACKIgnoredOld", LINUX_MIB_TCPDSACKIGNOREDOLD),
 	SNMP_MIB_ITEM("TCPDSACKIgnoredNoUndo", LINUX_MIB_TCPDSACKIGNOREDNOUNDO),
 	SNMP_MIB_ITEM("TCPSpuriousRTOs", LINUX_MIB_TCPSPURIOUSRTOS),
+	SNMP_MIB_ITEM("TCPMD5NotFound", LINUX_MIB_TCPMD5NOTFOUND),
+	SNMP_MIB_ITEM("TCPMD5Unexpected", LINUX_MIB_TCPMD5UNEXPECTED),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 380d6474cf6..6ee5354c9aa 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1509,14 +1509,14 @@ unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph,
 
 					/* BSD 4.2 compatibility hack :-( */
 					if (mtu == 0 &&
-					    old_mtu >= dst_metric(&rth->u.dst, RTAX_MTU) &&
+					    old_mtu >= dst_mtu(&rth->u.dst) &&
 					    old_mtu >= 68 + (iph->ihl << 2))
 						old_mtu -= iph->ihl << 2;
 
 					mtu = guess_mtu(old_mtu);
 				}
-				if (mtu <= dst_metric(&rth->u.dst, RTAX_MTU)) {
-					if (mtu < dst_metric(&rth->u.dst, RTAX_MTU)) {
+				if (mtu <= dst_mtu(&rth->u.dst)) {
+					if (mtu < dst_mtu(&rth->u.dst)) {
 						dst_confirm(&rth->u.dst);
 						if (mtu < ip_rt_min_pmtu) {
 							mtu = ip_rt_min_pmtu;
@@ -1538,7 +1538,7 @@ unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph,
 
 static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu)
 {
-	if (dst_metric(dst, RTAX_MTU) > mtu && mtu >= 68 &&
+	if (dst_mtu(dst) > mtu && mtu >= 68 &&
 	    !(dst_metric_locked(dst, RTAX_MTU))) {
 		if (mtu < ip_rt_min_pmtu) {
 			mtu = ip_rt_min_pmtu;
@@ -1667,7 +1667,7 @@ static void rt_set_nexthop(struct rtable *rt, struct fib_result *res, u32 itag)
 
 	if (dst_metric(&rt->u.dst, RTAX_HOPLIMIT) == 0)
 		rt->u.dst.metrics[RTAX_HOPLIMIT-1] = sysctl_ip_default_ttl;
-	if (dst_metric(&rt->u.dst, RTAX_MTU) > IP_MAX_MTU)
+	if (dst_mtu(&rt->u.dst) > IP_MAX_MTU)
 		rt->u.dst.metrics[RTAX_MTU-1] = IP_MAX_MTU;
 	if (dst_metric(&rt->u.dst, RTAX_ADVMSS) == 0)
 		rt->u.dst.metrics[RTAX_ADVMSS-1] = max_t(unsigned int, rt->u.dst.dev->mtu - 40,
@@ -2914,6 +2914,68 @@ static int ipv4_sysctl_rtcache_flush_strategy(ctl_table *table,
 	return 0;
 }
 
+static void rt_secret_reschedule(int old)
+{
+	struct net *net;
+	int new = ip_rt_secret_interval;
+	int diff = new - old;
+
+	if (!diff)
+		return;
+
+	rtnl_lock();
+	for_each_net(net) {
+		int deleted = del_timer_sync(&net->ipv4.rt_secret_timer);
+
+		if (!new)
+			continue;
+
+		if (deleted) {
+			long time = net->ipv4.rt_secret_timer.expires - jiffies;
+
+			if (time <= 0 || (time += diff) <= 0)
+				time = 0;
+
+			net->ipv4.rt_secret_timer.expires = time;
+		} else
+			net->ipv4.rt_secret_timer.expires = new;
+
+		net->ipv4.rt_secret_timer.expires += jiffies;
+		add_timer(&net->ipv4.rt_secret_timer);
+	}
+	rtnl_unlock();
+}
+
+static int ipv4_sysctl_rt_secret_interval(ctl_table *ctl, int write,
+					  struct file *filp,
+					  void __user *buffer, size_t *lenp,
+					  loff_t *ppos)
+{
+	int old = ip_rt_secret_interval;
+	int ret = proc_dointvec_jiffies(ctl, write, filp, buffer, lenp, ppos);
+
+	rt_secret_reschedule(old);
+
+	return ret;
+}
+
+static int ipv4_sysctl_rt_secret_interval_strategy(ctl_table *table,
+						   int __user *name,
+						   int nlen,
+						   void __user *oldval,
+						   size_t __user *oldlenp,
+						   void __user *newval,
+						   size_t newlen)
+{
+	int old = ip_rt_secret_interval;
+	int ret = sysctl_jiffies(table, name, nlen, oldval, oldlenp, newval,
+				 newlen);
+
+	rt_secret_reschedule(old);
+
+	return ret;
+}
+
 static ctl_table ipv4_route_table[] = {
 	{
 		.ctl_name	= NET_IPV4_ROUTE_GC_THRESH,
@@ -3048,20 +3110,29 @@ static ctl_table ipv4_route_table[] = {
 		.data		= &ip_rt_secret_interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_jiffies,
-		.strategy	= &sysctl_jiffies,
+		.proc_handler	= &ipv4_sysctl_rt_secret_interval,
+		.strategy	= &ipv4_sysctl_rt_secret_interval_strategy,
 	},
 	{ .ctl_name = 0 }
 };
 
-static __net_initdata struct ctl_path ipv4_route_path[] = {
+static struct ctl_table empty[1];
+
+static struct ctl_table ipv4_skeleton[] =
+{
+	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE,
+	  .mode = 0555, .child = ipv4_route_table},
+	{ .procname = "neigh", .ctl_name = NET_IPV4_NEIGH,
+	  .mode = 0555, .child = empty},
+	{ }
+};
+
+static __net_initdata struct ctl_path ipv4_path[] = {
 	{ .procname = "net", .ctl_name = CTL_NET, },
 	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
-	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE, },
 	{ },
 };
 
-
 static struct ctl_table ipv4_route_flush_table[] = {
 	{
 		.ctl_name 	= NET_IPV4_ROUTE_FLUSH,
@@ -3074,6 +3145,13 @@ static struct ctl_table ipv4_route_flush_table[] = {
 	{ .ctl_name = 0 },
 };
 
+static __net_initdata struct ctl_path ipv4_route_path[] = {
+	{ .procname = "net", .ctl_name = CTL_NET, },
+	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
+	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE, },
+	{ },
+};
+
 static __net_init int sysctl_route_net_init(struct net *net)
 {
 	struct ctl_table *tbl;
@@ -3126,10 +3204,12 @@ static __net_init int rt_secret_timer_init(struct net *net)
 	net->ipv4.rt_secret_timer.data = (unsigned long)net;
 	init_timer_deferrable(&net->ipv4.rt_secret_timer);
 
-	net->ipv4.rt_secret_timer.expires =
-		jiffies + net_random() % ip_rt_secret_interval +
-		ip_rt_secret_interval;
-	add_timer(&net->ipv4.rt_secret_timer);
+	if (ip_rt_secret_interval) {
+		net->ipv4.rt_secret_timer.expires =
+			jiffies + net_random() % ip_rt_secret_interval +
+			ip_rt_secret_interval;
+		add_timer(&net->ipv4.rt_secret_timer);
+	}
 	return 0;
 }
 
@@ -3216,14 +3296,16 @@ int __init ip_rt_init(void)
 	return rc;
 }
 
+#ifdef CONFIG_SYSCTL
 /*
  * We really need to sanitize the damn ipv4 init order, then all
  * this nonsense will go away.
  */
 void __init ip_static_sysctl_init(void)
 {
-	register_sysctl_paths(ipv4_route_path, ipv4_route_table);
+	register_sysctl_paths(ipv4_path, ipv4_skeleton);
 }
+#endif
 
 EXPORT_SYMBOL(__ip_select_ident);
 EXPORT_SYMBOL(ip_route_input);
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 770d827f5ab..e0689fd7b79 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -232,6 +232,7 @@ static struct ctl_table ipv4_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &ipv4_doint_and_flush,
 		.strategy	= &ipv4_doint_and_flush_strategy,
+		.extra2		= &init_net,
 	},
 	{
 		.ctl_name	= NET_IPV4_NO_PMTU_DISC,
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index a2b06d0cc26..1b4fee20fc9 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -655,8 +655,8 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack,
 		rep.th.doff = arg.iov[0].iov_len/4;
 
 		tcp_v4_md5_hash_hdr((__u8 *) &rep.opt[offset],
-				    key, ip_hdr(skb)->daddr,
-				    ip_hdr(skb)->saddr, &rep.th);
+				    key, ip_hdr(skb)->saddr,
+				    ip_hdr(skb)->daddr, &rep.th);
 	}
 #endif
 	arg.csum = csum_tcpudp_nofold(ip_hdr(skb)->daddr,
@@ -687,14 +687,14 @@ static void tcp_v4_timewait_ack(struct sock *sk, struct sk_buff *skb)
 	inet_twsk_put(tw);
 }
 
-static void tcp_v4_reqsk_send_ack(struct sk_buff *skb,
+static void tcp_v4_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
 				  struct request_sock *req)
 {
 	tcp_v4_send_ack(skb, tcp_rsk(req)->snt_isn + 1,
 			tcp_rsk(req)->rcv_isn + 1, req->rcv_wnd,
 			req->ts_recent,
 			0,
-			tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr));
+			tcp_v4_md5_do_lookup(sk, ip_hdr(skb)->daddr));
 }
 
 /*
@@ -1116,18 +1116,12 @@ static int tcp_v4_inbound_md5_hash(struct sock *sk, struct sk_buff *skb)
 		return 0;
 
 	if (hash_expected && !hash_location) {
-		LIMIT_NETDEBUG(KERN_INFO "MD5 Hash expected but NOT found "
-			       "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
-			       NIPQUAD(iph->saddr), ntohs(th->source),
-			       NIPQUAD(iph->daddr), ntohs(th->dest));
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND);
 		return 1;
 	}
 
 	if (!hash_expected && hash_location) {
-		LIMIT_NETDEBUG(KERN_INFO "MD5 Hash NOT expected but found "
-			       "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
-			       NIPQUAD(iph->saddr), ntohs(th->source),
-			       NIPQUAD(iph->daddr), ntohs(th->dest));
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED);
 		return 1;
 	}
 
@@ -2382,6 +2376,7 @@ static int __net_init tcp_sk_init(struct net *net)
 static void __net_exit tcp_sk_exit(struct net *net)
 {
 	inet_ctl_sock_destroy(net->ipv4.tcp_sock);
+	inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET);
 }
 
 static struct pernet_operations __net_initdata tcp_sk_ops = {
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 204c4216266..f976fc57892 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -609,7 +609,7 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb,
 					  tcp_rsk(req)->rcv_isn + 1, tcp_rsk(req)->rcv_isn + 1 + req->rcv_wnd)) {
 		/* Out of window: send ACK and drop. */
 		if (!(flg & TCP_FLAG_RST))
-			req->rsk_ops->send_ack(skb, req);
+			req->rsk_ops->send_ack(sk, skb, req);
 		if (paws_reject)
 			NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSESTABREJECTED);
 		return NULL;
@@ -618,89 +618,87 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb,
 	/* In sequence, PAWS is OK. */
 
 	if (tmp_opt.saw_tstamp && !after(TCP_SKB_CB(skb)->seq, tcp_rsk(req)->rcv_isn + 1))
-			req->ts_recent = tmp_opt.rcv_tsval;
+		req->ts_recent = tmp_opt.rcv_tsval;
 
-		if (TCP_SKB_CB(skb)->seq == tcp_rsk(req)->rcv_isn) {
-			/* Truncate SYN, it is out of window starting
-			   at tcp_rsk(req)->rcv_isn + 1. */
-			flg &= ~TCP_FLAG_SYN;
-		}
+	if (TCP_SKB_CB(skb)->seq == tcp_rsk(req)->rcv_isn) {
+		/* Truncate SYN, it is out of window starting
+		   at tcp_rsk(req)->rcv_isn + 1. */
+		flg &= ~TCP_FLAG_SYN;
+	}
 
-		/* RFC793: "second check the RST bit" and
-		 *	   "fourth, check the SYN bit"
-		 */
-		if (flg & (TCP_FLAG_RST|TCP_FLAG_SYN)) {
-			TCP_INC_STATS_BH(sock_net(sk), TCP_MIB_ATTEMPTFAILS);
-			goto embryonic_reset;
-		}
+	/* RFC793: "second check the RST bit" and
+	 *	   "fourth, check the SYN bit"
+	 */
+	if (flg & (TCP_FLAG_RST|TCP_FLAG_SYN)) {
+		TCP_INC_STATS_BH(sock_net(sk), TCP_MIB_ATTEMPTFAILS);
+		goto embryonic_reset;
+	}
 
-		/* ACK sequence verified above, just make sure ACK is
-		 * set.  If ACK not set, just silently drop the packet.
-		 */
-		if (!(flg & TCP_FLAG_ACK))
-			return NULL;
-
-		/* If TCP_DEFER_ACCEPT is set, drop bare ACK. */
-		if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
-		    TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
-			inet_rsk(req)->acked = 1;
-			return NULL;
-		}
+	/* ACK sequence verified above, just make sure ACK is
+	 * set.  If ACK not set, just silently drop the packet.
+	 */
+	if (!(flg & TCP_FLAG_ACK))
+		return NULL;
 
-		/* OK, ACK is valid, create big socket and
-		 * feed this segment to it. It will repeat all
-		 * the tests. THIS SEGMENT MUST MOVE SOCKET TO
-		 * ESTABLISHED STATE. If it will be dropped after
-		 * socket is created, wait for troubles.
-		 */
-		child = inet_csk(sk)->icsk_af_ops->syn_recv_sock(sk, skb,
-								 req, NULL);
-		if (child == NULL)
-			goto listen_overflow;
+	/* If TCP_DEFER_ACCEPT is set, drop bare ACK. */
+	if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
+	    TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
+		inet_rsk(req)->acked = 1;
+		return NULL;
+	}
+
+	/* OK, ACK is valid, create big socket and
+	 * feed this segment to it. It will repeat all
+	 * the tests. THIS SEGMENT MUST MOVE SOCKET TO
+	 * ESTABLISHED STATE. If it will be dropped after
+	 * socket is created, wait for troubles.
+	 */
+	child = inet_csk(sk)->icsk_af_ops->syn_recv_sock(sk, skb, req, NULL);
+	if (child == NULL)
+		goto listen_overflow;
 #ifdef CONFIG_TCP_MD5SIG
-		else {
-			/* Copy over the MD5 key from the original socket */
-			struct tcp_md5sig_key *key;
-			struct tcp_sock *tp = tcp_sk(sk);
-			key = tp->af_specific->md5_lookup(sk, child);
-			if (key != NULL) {
-				/*
-				 * We're using one, so create a matching key on the
-				 * newsk structure. If we fail to get memory then we
-				 * end up not copying the key across. Shucks.
-				 */
-				char *newkey = kmemdup(key->key, key->keylen,
-						       GFP_ATOMIC);
-				if (newkey) {
-					if (!tcp_alloc_md5sig_pool())
-						BUG();
-					tp->af_specific->md5_add(child, child,
-								 newkey,
-								 key->keylen);
-				}
+	else {
+		/* Copy over the MD5 key from the original socket */
+		struct tcp_md5sig_key *key;
+		struct tcp_sock *tp = tcp_sk(sk);
+		key = tp->af_specific->md5_lookup(sk, child);
+		if (key != NULL) {
+			/*
+			 * We're using one, so create a matching key on the
+			 * newsk structure. If we fail to get memory then we
+			 * end up not copying the key across. Shucks.
+			 */
+			char *newkey = kmemdup(key->key, key->keylen,
+					       GFP_ATOMIC);
+			if (newkey) {
+				if (!tcp_alloc_md5sig_pool())
+					BUG();
+				tp->af_specific->md5_add(child, child, newkey,
+							 key->keylen);
 			}
 		}
+	}
 #endif
 
-		inet_csk_reqsk_queue_unlink(sk, req, prev);
-		inet_csk_reqsk_queue_removed(sk, req);
+	inet_csk_reqsk_queue_unlink(sk, req, prev);
+	inet_csk_reqsk_queue_removed(sk, req);
 
-		inet_csk_reqsk_queue_add(sk, req, child);
-		return child;
+	inet_csk_reqsk_queue_add(sk, req, child);
+	return child;
 
-	listen_overflow:
-		if (!sysctl_tcp_abort_on_overflow) {
-			inet_rsk(req)->acked = 1;
-			return NULL;
-		}
+listen_overflow:
+	if (!sysctl_tcp_abort_on_overflow) {
+		inet_rsk(req)->acked = 1;
+		return NULL;
+	}
 
-	embryonic_reset:
-		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_EMBRYONICRSTS);
-		if (!(flg & TCP_FLAG_RST))
-			req->rsk_ops->send_reset(sk, skb);
+embryonic_reset:
+	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_EMBRYONICRSTS);
+	if (!(flg & TCP_FLAG_RST))
+		req->rsk_ops->send_reset(sk, skb);
 
-		inet_csk_reqsk_queue_drop(sk, req, prev);
-		return NULL;
+	inet_csk_reqsk_queue_drop(sk, req, prev);
+	return NULL;
 }
 
 /*
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index a00532de2a8..8165f5aa8c7 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -468,7 +468,8 @@ static unsigned tcp_syn_options(struct sock *sk, struct sk_buff *skb,
 	}
 	if (likely(sysctl_tcp_window_scaling)) {
 		opts->ws = tp->rx_opt.rcv_wscale;
-		size += TCPOLEN_WSCALE_ALIGNED;
+		if(likely(opts->ws))
+			size += TCPOLEN_WSCALE_ALIGNED;
 	}
 	if (likely(sysctl_tcp_sack)) {
 		opts->options |= OPTION_SACK_ADVERTISE;
@@ -509,7 +510,8 @@ static unsigned tcp_synack_options(struct sock *sk,
 
 	if (likely(ireq->wscale_ok)) {
 		opts->ws = ireq->rcv_wscale;
-		size += TCPOLEN_WSCALE_ALIGNED;
+		if(likely(opts->ws))
+			size += TCPOLEN_WSCALE_ALIGNED;
 	}
 	if (likely(doing_ts)) {
 		opts->options |= OPTION_TS;
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 383d17359d0..57e26fa6618 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -951,6 +951,27 @@ int udp_disconnect(struct sock *sk, int flags)
 	return 0;
 }
 
+static int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+	int is_udplite = IS_UDPLITE(sk);
+	int rc;
+
+	if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
+		/* Note that an ENOMEM error is charged twice */
+		if (rc == -ENOMEM)
+			UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
+					 is_udplite);
+		goto drop;
+	}
+
+	return 0;
+
+drop:
+	UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
+	kfree_skb(skb);
+	return -1;
+}
+
 /* returns:
  *  -1: error
  *   0: success
@@ -1042,17 +1063,16 @@ int udp_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
 			goto drop;
 	}
 
-	if ((rc = sock_queue_rcv_skb(sk,skb)) < 0) {
-		/* Note that an ENOMEM error is charged twice */
-		if (rc == -ENOMEM) {
-			UDP_INC_STATS_BH(sock_net(sk),
-					UDP_MIB_RCVBUFERRORS, is_udplite);
-			atomic_inc(&sk->sk_drops);
-		}
-		goto drop;
-	}
+	rc = 0;
 
-	return 0;
+	bh_lock_sock(sk);
+	if (!sock_owned_by_user(sk))
+		rc = __udp_queue_rcv_skb(sk, skb);
+	else
+		sk_add_backlog(sk, skb);
+	bh_unlock_sock(sk);
+
+	return rc;
 
 drop:
 	UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
@@ -1090,15 +1110,7 @@ static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
 				skb1 = skb_clone(skb, GFP_ATOMIC);
 
 			if (skb1) {
-				int ret = 0;
-
-				bh_lock_sock_nested(sk);
-				if (!sock_owned_by_user(sk))
-					ret = udp_queue_rcv_skb(sk, skb1);
-				else
-					sk_add_backlog(sk, skb1);
-				bh_unlock_sock(sk);
-
+				int ret = udp_queue_rcv_skb(sk, skb1);
 				if (ret > 0)
 					/* we should probably re-process instead
 					 * of dropping packets here. */
@@ -1193,13 +1205,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct hlist_head udptable[],
 			uh->dest, inet_iif(skb), udptable);
 
 	if (sk != NULL) {
-		int ret = 0;
-		bh_lock_sock_nested(sk);
-		if (!sock_owned_by_user(sk))
-			ret = udp_queue_rcv_skb(sk, skb);
-		else
-			sk_add_backlog(sk, skb);
-		bh_unlock_sock(sk);
+		int ret = udp_queue_rcv_skb(sk, skb);
 		sock_put(sk);
 
 		/* a return value > 0 means to resubmit the input, but
@@ -1492,7 +1498,7 @@ struct proto udp_prot = {
 	.sendmsg	   = udp_sendmsg,
 	.recvmsg	   = udp_recvmsg,
 	.sendpage	   = udp_sendpage,
-	.backlog_rcv	   = udp_queue_rcv_skb,
+	.backlog_rcv	   = __udp_queue_rcv_skb,
 	.hash		   = udp_lib_hash,
 	.unhash		   = udp_lib_unhash,
 	.get_port	   = udp_v4_get_port,
diff --git a/net/ipv4/xfrm4_mode_beet.c b/net/ipv4/xfrm4_mode_beet.c
index 9c798abce73..63418185f52 100644
--- a/net/ipv4/xfrm4_mode_beet.c
+++ b/net/ipv4/xfrm4_mode_beet.c
@@ -47,8 +47,10 @@ static int xfrm4_beet_output(struct xfrm_state *x, struct sk_buff *skb)
 	if (unlikely(optlen))
 		hdrlen += IPV4_BEET_PHMAXLEN - (optlen & 4);
 
-	skb_set_network_header(skb, IPV4_BEET_PHMAXLEN - x->props.header_len -
-				    hdrlen);
+	skb_set_network_header(skb, -x->props.header_len -
+			            hdrlen + (XFRM_MODE_SKB_CB(skb)->ihl - sizeof(*top_iph)));
+	if (x->sel.family != AF_INET6)
+		skb->network_header += IPV4_BEET_PHMAXLEN;
 	skb->mac_header = skb->network_header +
 			  offsetof(struct iphdr, protocol);
 	skb->transport_header = skb->network_header + sizeof(*top_iph);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a7842c54f58..7b6a584b62d 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1106,13 +1106,12 @@ out:
 	return ret;
 }
 
-int ipv6_dev_get_saddr(struct net_device *dst_dev,
+int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
 		       const struct in6_addr *daddr, unsigned int prefs,
 		       struct in6_addr *saddr)
 {
 	struct ipv6_saddr_score scores[2],
 				*score = &scores[0], *hiscore = &scores[1];
-	struct net *net = dev_net(dst_dev);
 	struct ipv6_saddr_dst dst;
 	struct net_device *dev;
 	int dst_type;
@@ -1689,6 +1688,7 @@ addrconf_prefix_route(struct in6_addr *pfx, int plen, struct net_device *dev,
 		.fc_dst_len = plen,
 		.fc_flags = RTF_UP | flags,
 		.fc_nlinfo.nl_net = dev_net(dev),
+		.fc_protocol = RTPROT_KERNEL,
 	};
 
 	ipv6_addr_copy(&cfg.fc_dst, pfx);
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index f7b535dec86..410046a8cc9 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -732,7 +732,7 @@ int datagram_send_ctl(struct net *net,
 			LIMIT_NETDEBUG(KERN_DEBUG "invalid cmsg type: %d\n",
 				       cmsg->cmsg_type);
 			err = -EINVAL;
-			break;
+			goto exit_f;
 		}
 	}
 
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index c6bb4c6d24b..b181b08fb76 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -521,6 +521,10 @@ static int esp6_init_state(struct xfrm_state *x)
 			      crypto_aead_ivsize(aead);
 	switch (x->props.mode) {
 	case XFRM_MODE_BEET:
+		if (x->sel.family != AF_INET6)
+			x->props.header_len += IPV4_BEET_PHMAXLEN +
+				               (sizeof(struct ipv6hdr) - sizeof(struct iphdr));
+		break;
 	case XFRM_MODE_TRANSPORT:
 		break;
 	case XFRM_MODE_TUNNEL:
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 8d05527524e..f5de3f9dc69 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -93,7 +93,8 @@ static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
 			if (flags & RT6_LOOKUP_F_SRCPREF_COA)
 				srcprefs |= IPV6_PREFER_SRC_COA;
 
-			if (ipv6_dev_get_saddr(ip6_dst_idev(&rt->u.dst)->dev,
+			if (ipv6_dev_get_saddr(net,
+					       ip6_dst_idev(&rt->u.dst)->dev,
 					       &flp->fl6_dst, srcprefs,
 					       &saddr))
 				goto again;
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index abedf95fdf2..b3157a0cc15 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -91,19 +91,22 @@ static struct inet6_protocol icmpv6_protocol = {
 	.flags		=	INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
 };
 
-static __inline__ int icmpv6_xmit_lock(struct sock *sk)
+static __inline__ struct sock *icmpv6_xmit_lock(struct net *net)
 {
+	struct sock *sk;
+
 	local_bh_disable();
 
+	sk = icmpv6_sk(net);
 	if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
 		/* This can happen if the output path (f.e. SIT or
 		 * ip6ip6 tunnel) signals dst_link_failure() for an
 		 * outgoing ICMP6 packet.
 		 */
 		local_bh_enable();
-		return 1;
+		return NULL;
 	}
-	return 0;
+	return sk;
 }
 
 static __inline__ void icmpv6_xmit_unlock(struct sock *sk)
@@ -392,11 +395,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info,
 	fl.fl_icmp_code = code;
 	security_skb_classify_flow(skb, &fl);
 
-	sk = icmpv6_sk(net);
-	np = inet6_sk(sk);
-
-	if (icmpv6_xmit_lock(sk))
+	sk = icmpv6_xmit_lock(net);
+	if (sk == NULL)
 		return;
+	np = inet6_sk(sk);
 
 	if (!icmpv6_xrlim_allow(sk, type, &fl))
 		goto out;
@@ -539,11 +541,10 @@ static void icmpv6_echo_reply(struct sk_buff *skb)
 	fl.fl_icmp_type = ICMPV6_ECHO_REPLY;
 	security_skb_classify_flow(skb, &fl);
 
-	sk = icmpv6_sk(net);
-	np = inet6_sk(sk);
-
-	if (icmpv6_xmit_lock(sk))
+	sk = icmpv6_xmit_lock(net);
+	if (sk == NULL)
 		return;
+	np = inet6_sk(sk);
 
 	if (!fl.oif && ipv6_addr_is_multicast(&fl.fl6_dst))
 		fl.oif = np->mcast_oif;
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 52dddc25d3e..29c7c99e69f 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -378,6 +378,7 @@ static int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb)
 
 	arg.skb = skb;
 	arg.cb = cb;
+	arg.net = net;
 	w->args = &arg;
 
 	for (h = s_h; h < FIB_TABLE_HASHSZ; h++, s_e = 0) {
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 6811901e6b1..3df2c442d90 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -236,6 +236,10 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 	skb_reset_network_header(skb);
 	hdr = ipv6_hdr(skb);
 
+	/* Allow local fragmentation. */
+	if (ipfragok)
+		skb->local_df = 1;
+
 	/*
 	 *	Fill in the IPv6 header
 	 */
@@ -265,7 +269,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 	skb->mark = sk->sk_mark;
 
 	mtu = dst_mtu(dst);
-	if ((skb->len <= mtu) || ipfragok || skb_is_gso(skb)) {
+	if ((skb->len <= mtu) || skb->local_df || skb_is_gso(skb)) {
 		IP6_INC_STATS(ip6_dst_idev(skb->dst),
 			      IPSTATS_MIB_OUTREQUESTS);
 		return NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, dst->dev,
@@ -930,7 +934,7 @@ static int ip6_dst_lookup_tail(struct sock *sk,
 		goto out_err_release;
 
 	if (ipv6_addr_any(&fl->fl6_src)) {
-		err = ipv6_dev_get_saddr(ip6_dst_idev(*dst)->dev,
+		err = ipv6_dev_get_saddr(net, ip6_dst_idev(*dst)->dev,
 					 &fl->fl6_dst,
 					 sk ? inet6_sk(sk)->srcprefs : 0,
 					 &fl->fl6_src);
@@ -939,39 +943,39 @@ static int ip6_dst_lookup_tail(struct sock *sk,
 	}
 
 #ifdef CONFIG_IPV6_OPTIMISTIC_DAD
-		/*
-		 * Here if the dst entry we've looked up
-		 * has a neighbour entry that is in the INCOMPLETE
-		 * state and the src address from the flow is
-		 * marked as OPTIMISTIC, we release the found
-		 * dst entry and replace it instead with the
-		 * dst entry of the nexthop router
-		 */
-		if (!((*dst)->neighbour->nud_state & NUD_VALID)) {
-			struct inet6_ifaddr *ifp;
-			struct flowi fl_gw;
-			int redirect;
-
-			ifp = ipv6_get_ifaddr(net, &fl->fl6_src,
-					      (*dst)->dev, 1);
-
-			redirect = (ifp && ifp->flags & IFA_F_OPTIMISTIC);
-			if (ifp)
-				in6_ifa_put(ifp);
-
-			if (redirect) {
-				/*
-				 * We need to get the dst entry for the
-				 * default router instead
-				 */
-				dst_release(*dst);
-				memcpy(&fl_gw, fl, sizeof(struct flowi));
-				memset(&fl_gw.fl6_dst, 0, sizeof(struct in6_addr));
-				*dst = ip6_route_output(net, sk, &fl_gw);
-				if ((err = (*dst)->error))
-					goto out_err_release;
-			}
+	/*
+	 * Here if the dst entry we've looked up
+	 * has a neighbour entry that is in the INCOMPLETE
+	 * state and the src address from the flow is
+	 * marked as OPTIMISTIC, we release the found
+	 * dst entry and replace it instead with the
+	 * dst entry of the nexthop router
+	 */
+	if ((*dst)->neighbour && !((*dst)->neighbour->nud_state & NUD_VALID)) {
+		struct inet6_ifaddr *ifp;
+		struct flowi fl_gw;
+		int redirect;
+
+		ifp = ipv6_get_ifaddr(net, &fl->fl6_src,
+				      (*dst)->dev, 1);
+
+		redirect = (ifp && ifp->flags & IFA_F_OPTIMISTIC);
+		if (ifp)
+			in6_ifa_put(ifp);
+
+		if (redirect) {
+			/*
+			 * We need to get the dst entry for the
+			 * default router instead
+			 */
+			dst_release(*dst);
+			memcpy(&fl_gw, fl, sizeof(struct flowi));
+			memset(&fl_gw.fl6_dst, 0, sizeof(struct in6_addr));
+			*dst = ip6_route_output(net, sk, &fl_gw);
+			if ((err = (*dst)->error))
+				goto out_err_release;
 		}
+	}
 #endif
 
 	return 0;
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index ea33b26512c..4e5eac301f9 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -346,6 +346,8 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname,
 		 */
 		if (optlen == 0)
 			optval = NULL;
+		else if (optval == NULL)
+			goto e_inval;
 		else if (optlen < sizeof(struct ipv6_opt_hdr) ||
 			 optlen & 0x7 || optlen > 8 * 255)
 			goto e_inval;
@@ -909,7 +911,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
 		} else {
 			if (np->rxopt.bits.rxinfo) {
 				struct in6_pktinfo src_info;
-				src_info.ipi6_ifindex = np->mcast_oif;
+				src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif : sk->sk_bound_dev_if;
 				ipv6_addr_copy(&src_info.ipi6_addr, &np->daddr);
 				put_cmsg(&msg, SOL_IPV6, IPV6_PKTINFO, sizeof(src_info), &src_info);
 			}
@@ -919,7 +921,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
 			}
 			if (np->rxopt.bits.rxoinfo) {
 				struct in6_pktinfo src_info;
-				src_info.ipi6_ifindex = np->mcast_oif;
+				src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif : sk->sk_bound_dev_if;
 				ipv6_addr_copy(&src_info.ipi6_addr, &np->daddr);
 				put_cmsg(&msg, SOL_IPV6, IPV6_2292PKTINFO, sizeof(src_info), &src_info);
 			}
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index beb48e3f038..f1c62ba0f56 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -549,7 +549,7 @@ static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh,
 			override = 0;
 		in6_ifa_put(ifp);
 	} else {
-		if (ipv6_dev_get_saddr(dev, daddr,
+		if (ipv6_dev_get_saddr(dev_net(dev), dev, daddr,
 				       inet6_sk(dev_net(dev)->ipv6.ndisc_sk)->srcprefs,
 				       &tmpaddr))
 			return;
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index f82f6074cf8..0179b66864f 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -286,7 +286,6 @@ proc_net_fail:
 
 void ipv6_misc_proc_exit(void)
 {
-	proc_net_remove(&init_net, "sockstat6");
 	proc_net_remove(&init_net, "dev_snmp6");
 	proc_net_remove(&init_net, "snmp6");
 	unregister_pernet_subsys(&ipv6_proc_ops);
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 01d47674f7e..e53e493606c 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -377,14 +377,14 @@ static inline int rawv6_rcv_skb(struct sock * sk, struct sk_buff * skb)
 	    skb_checksum_complete(skb)) {
 		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
-		return 0;
+		return NET_RX_DROP;
 	}
 
 	/* Charge it to the socket. */
 	if (sock_queue_rcv_skb(sk,skb)<0) {
 		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
-		return 0;
+		return NET_RX_DROP;
 	}
 
 	return 0;
@@ -429,7 +429,7 @@ int rawv6_rcv(struct sock *sk, struct sk_buff *skb)
 		if (skb_checksum_complete(skb)) {
 			atomic_inc(&sk->sk_drops);
 			kfree_skb(skb);
-			return 0;
+			return NET_RX_DROP;
 		}
 	}
 
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 86540b24b27..9af6115f0f5 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1249,7 +1249,7 @@ install_route:
 
 	if (dst_metric(&rt->u.dst, RTAX_HOPLIMIT) == 0)
 		rt->u.dst.metrics[RTAX_HOPLIMIT-1] = -1;
-	if (!dst_metric(&rt->u.dst, RTAX_MTU))
+	if (!dst_mtu(&rt->u.dst))
 		rt->u.dst.metrics[RTAX_MTU-1] = ipv6_get_mtu(dev);
 	if (!dst_metric(&rt->u.dst, RTAX_ADVMSS))
 		rt->u.dst.metrics[RTAX_ADVMSS-1] = ipv6_advmss(net, dst_mtu(&rt->u.dst));
@@ -2106,7 +2106,8 @@ static inline size_t rt6_nlmsg_size(void)
 	       + nla_total_size(sizeof(struct rta_cacheinfo));
 }
 
-static int rt6_fill_node(struct sk_buff *skb, struct rt6_info *rt,
+static int rt6_fill_node(struct net *net,
+			 struct sk_buff *skb, struct rt6_info *rt,
 			 struct in6_addr *dst, struct in6_addr *src,
 			 int iif, int type, u32 pid, u32 seq,
 			 int prefix, int nowait, unsigned int flags)
@@ -2187,8 +2188,9 @@ static int rt6_fill_node(struct sk_buff *skb, struct rt6_info *rt,
 #endif
 			NLA_PUT_U32(skb, RTA_IIF, iif);
 	} else if (dst) {
+		struct inet6_dev *idev = ip6_dst_idev(&rt->u.dst);
 		struct in6_addr saddr_buf;
-		if (ipv6_dev_get_saddr(ip6_dst_idev(&rt->u.dst)->dev,
+		if (ipv6_dev_get_saddr(net, idev ? idev->dev : NULL,
 				       dst, 0, &saddr_buf) == 0)
 			NLA_PUT(skb, RTA_PREFSRC, 16, &saddr_buf);
 	}
@@ -2233,7 +2235,8 @@ int rt6_dump_route(struct rt6_info *rt, void *p_arg)
 	} else
 		prefix = 0;
 
-	return rt6_fill_node(arg->skb, rt, NULL, NULL, 0, RTM_NEWROUTE,
+	return rt6_fill_node(arg->net,
+		     arg->skb, rt, NULL, NULL, 0, RTM_NEWROUTE,
 		     NETLINK_CB(arg->cb->skb).pid, arg->cb->nlh->nlmsg_seq,
 		     prefix, 0, NLM_F_MULTI);
 }
@@ -2299,7 +2302,7 @@ static int inet6_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void
 	rt = (struct rt6_info*) ip6_route_output(net, NULL, &fl);
 	skb->dst = &rt->u.dst;
 
-	err = rt6_fill_node(skb, rt, &fl.fl6_dst, &fl.fl6_src, iif,
+	err = rt6_fill_node(net, skb, rt, &fl.fl6_dst, &fl.fl6_src, iif,
 			    RTM_NEWROUTE, NETLINK_CB(in_skb).pid,
 			    nlh->nlmsg_seq, 0, 0, 0);
 	if (err < 0) {
@@ -2326,7 +2329,7 @@ void inet6_rt_notify(int event, struct rt6_info *rt, struct nl_info *info)
 	if (skb == NULL)
 		goto errout;
 
-	err = rt6_fill_node(skb, rt, NULL, NULL, 0,
+	err = rt6_fill_node(net, skb, rt, NULL, NULL, 0,
 				event, info->pid, seq, 0, 0, 0);
 	if (err < 0) {
 		/* -EMSGSIZE implies BUG in rt6_nlmsg_size() */
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index a46badd1082..ec394cf5a19 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -199,10 +199,8 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 	ireq6 = inet6_rsk(req);
 	treq = tcp_rsk(req);
 
-	if (security_inet_conn_request(sk, skb, req)) {
-		reqsk_free(req);
-		goto out;
-	}
+	if (security_inet_conn_request(sk, skb, req))
+		goto out_free;
 
 	req->mss = mss;
 	ireq->rmt_port = th->source;
@@ -255,14 +253,13 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 		fl.fl_ip_dport = inet_rsk(req)->rmt_port;
 		fl.fl_ip_sport = inet_sk(sk)->sport;
 		security_req_classify_flow(req, &fl);
-		if (ip6_dst_lookup(sk, &dst, &fl)) {
-			reqsk_free(req);
-			goto out;
-		}
+		if (ip6_dst_lookup(sk, &dst, &fl))
+			goto out_free;
+
 		if (final_p)
 			ipv6_addr_copy(&fl.fl6_dst, final_p);
 		if ((xfrm_lookup(&dst, &fl, sk, 0)) < 0)
-			goto out;
+			goto out_free;
 	}
 
 	req->window_clamp = tp->window_clamp ? :dst_metric(dst, RTAX_WINDOW);
@@ -273,7 +270,10 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 	ireq->rcv_wscale = rcv_wscale;
 
 	ret = get_cookie_sock(sk, skb, req, dst);
-
-out:	return ret;
+out:
+	return ret;
+out_free:
+	reqsk_free(req);
+	return NULL;
 }
 
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index e6dfaeac6be..587f8f60c48 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -156,7 +156,7 @@ static struct ctl_table_header *ip6_base;
 int ipv6_static_sysctl_register(void)
 {
 	static struct ctl_table empty[1];
-	ip6_base = register_net_sysctl_rotable(net_ipv6_ctl_path, empty);
+	ip6_base = register_sysctl_paths(net_ipv6_ctl_path, empty);
 	if (ip6_base == NULL)
 		return -ENOMEM;
 	return 0;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index cff778b23a7..b585c850a89 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -69,7 +69,8 @@
 #include <linux/scatterlist.h>
 
 static void	tcp_v6_send_reset(struct sock *sk, struct sk_buff *skb);
-static void	tcp_v6_reqsk_send_ack(struct sk_buff *skb, struct request_sock *req);
+static void	tcp_v6_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
+				      struct request_sock *req);
 
 static int	tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb);
 
@@ -748,7 +749,7 @@ static int tcp_v6_md5_hash_pseudoheader(struct tcp_md5sig_pool *hp,
 	ipv6_addr_copy(&bp->saddr, saddr);
 	ipv6_addr_copy(&bp->daddr, daddr);
 	bp->protocol = cpu_to_be32(IPPROTO_TCP);
-	bp->len = cpu_to_be16(nbytes);
+	bp->len = cpu_to_be32(nbytes);
 
 	sg_init_one(&sg, bp, sizeof(*bp));
 	return crypto_hash_update(&hp->md5_desc, &sg, sizeof(*bp));
@@ -849,28 +850,17 @@ static int tcp_v6_inbound_md5_hash (struct sock *sk, struct sk_buff *skb)
 	hash_expected = tcp_v6_md5_do_lookup(sk, &ip6h->saddr);
 	hash_location = tcp_parse_md5sig_option(th);
 
-	/* do we have a hash as expected? */
-	if (!hash_expected) {
-		if (!hash_location)
-			return 0;
-		if (net_ratelimit()) {
-			printk(KERN_INFO "MD5 Hash NOT expected but found "
-			       "(" NIP6_FMT ", %u)->"
-			       "(" NIP6_FMT ", %u)\n",
-			       NIP6(ip6h->saddr), ntohs(th->source),
-			       NIP6(ip6h->daddr), ntohs(th->dest));
-		}
+	/* We've parsed the options - do we have a hash? */
+	if (!hash_expected && !hash_location)
+		return 0;
+
+	if (hash_expected && !hash_location) {
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND);
 		return 1;
 	}
 
-	if (!hash_location) {
-		if (net_ratelimit()) {
-			printk(KERN_INFO "MD5 Hash expected but NOT found "
-			       "(" NIP6_FMT ", %u)->"
-			       "(" NIP6_FMT ", %u)\n",
-			       NIP6(ip6h->saddr), ntohs(th->source),
-			       NIP6(ip6h->daddr), ntohs(th->dest));
-		}
+	if (!hash_expected && hash_location) {
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED);
 		return 1;
 	}
 
@@ -1105,8 +1095,8 @@ static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32
 		*topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
 				(TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
 		tcp_v6_md5_hash_hdr((__u8 *)topt, key,
-				    &ipv6_hdr(skb)->daddr,
-				    &ipv6_hdr(skb)->saddr, t1);
+				    &ipv6_hdr(skb)->saddr,
+				    &ipv6_hdr(skb)->daddr, t1);
 	}
 #endif
 
@@ -1149,10 +1139,11 @@ static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb)
 	inet_twsk_put(tw);
 }
 
-static void tcp_v6_reqsk_send_ack(struct sk_buff *skb, struct request_sock *req)
+static void tcp_v6_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
+				  struct request_sock *req)
 {
 	tcp_v6_send_ack(skb, tcp_rsk(req)->snt_isn + 1, tcp_rsk(req)->rcv_isn + 1, req->rcv_wnd, req->ts_recent,
-			tcp_v6_md5_do_lookup(skb->sk, &ipv6_hdr(skb)->daddr));
+			tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr));
 }
 
 
@@ -2157,6 +2148,7 @@ static int tcpv6_net_init(struct net *net)
 static void tcpv6_net_exit(struct net *net)
 {
 	inet_ctl_sock_destroy(net->ipv6.tcp_sk);
+	inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET6);
 }
 
 static struct pernet_operations tcpv6_net_ops = {
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index d1477b350f7..a6aecf76a71 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -379,7 +379,7 @@ static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
 					uh->source, saddr, dif))) {
 		struct sk_buff *buff = skb_clone(skb, GFP_ATOMIC);
 		if (buff) {
-			bh_lock_sock_nested(sk2);
+			bh_lock_sock(sk2);
 			if (!sock_owned_by_user(sk2))
 				udpv6_queue_rcv_skb(sk2, buff);
 			else
@@ -387,7 +387,7 @@ static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
 			bh_unlock_sock(sk2);
 		}
 	}
-	bh_lock_sock_nested(sk);
+	bh_lock_sock(sk);
 	if (!sock_owned_by_user(sk))
 		udpv6_queue_rcv_skb(sk, skb);
 	else
@@ -508,7 +508,7 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct hlist_head udptable[],
 
 	/* deliver */
 
-	bh_lock_sock_nested(sk);
+	bh_lock_sock(sk);
 	if (!sock_owned_by_user(sk))
 		udpv6_queue_rcv_skb(sk, skb);
 	else
diff --git a/net/ipv6/xfrm6_mode_beet.c b/net/ipv6/xfrm6_mode_beet.c
index d6ce400f585..bbd48b101ba 100644
--- a/net/ipv6/xfrm6_mode_beet.c
+++ b/net/ipv6/xfrm6_mode_beet.c
@@ -40,16 +40,39 @@ static void xfrm6_beet_make_header(struct sk_buff *skb)
 static int xfrm6_beet_output(struct xfrm_state *x, struct sk_buff *skb)
 {
 	struct ipv6hdr *top_iph;
-
-	skb_set_network_header(skb, -x->props.header_len);
+	struct ip_beet_phdr *ph;
+	struct iphdr *iphv4;
+	int optlen, hdr_len;
+
+	iphv4 = ip_hdr(skb);
+	hdr_len = 0;
+	optlen = XFRM_MODE_SKB_CB(skb)->optlen;
+	if (unlikely(optlen))
+		hdr_len += IPV4_BEET_PHMAXLEN - (optlen & 4);
+
+	skb_set_network_header(skb, -x->props.header_len - hdr_len);
+	if (x->sel.family != AF_INET6)
+		skb->network_header += IPV4_BEET_PHMAXLEN;
 	skb->mac_header = skb->network_header +
 			  offsetof(struct ipv6hdr, nexthdr);
 	skb->transport_header = skb->network_header + sizeof(*top_iph);
-	__skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl);
+	ph = (struct ip_beet_phdr *)__skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl-hdr_len);
 
 	xfrm6_beet_make_header(skb);
 
 	top_iph = ipv6_hdr(skb);
+	if (unlikely(optlen)) {
+
+		BUG_ON(optlen < 0);
+
+		ph->padlen = 4 - (optlen & 4);
+		ph->hdrlen = optlen / 8;
+		ph->nexthdr = top_iph->nexthdr;
+		if (ph->padlen)
+			memset(ph + 1, IPOPT_NOP, ph->padlen);
+
+		top_iph->nexthdr = IPPROTO_BEETPH;
+	}
 
 	ipv6_addr_copy(&top_iph->saddr, (struct in6_addr *)&x->props.saddr);
 	ipv6_addr_copy(&top_iph->daddr, (struct in6_addr *)&x->id.daddr);
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 8f1e0543b3c..08e4cbbe3f0 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -52,12 +52,14 @@ static struct dst_entry *xfrm6_dst_lookup(int tos, xfrm_address_t *saddr,
 static int xfrm6_get_saddr(xfrm_address_t *saddr, xfrm_address_t *daddr)
 {
 	struct dst_entry *dst;
+	struct net_device *dev;
 
 	dst = xfrm6_dst_lookup(0, NULL, daddr);
 	if (IS_ERR(dst))
 		return -EHOSTUNREACH;
 
-	ipv6_dev_get_saddr(ip6_dst_idev(dst)->dev,
+	dev = ip6_dst_idev(dst)->dev;
+	ipv6_dev_get_saddr(dev_net(dev), dev,
 			   (struct in6_addr *)&daddr->a6, 0,
 			   (struct in6_addr *)&saddr->a6);
 	dst_release(dst);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 8e7ba0e62cf..297c257864c 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -81,6 +81,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
 				  enum nl80211_iftype type, u32 *flags,
 				  struct vif_params *params)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct net_device *dev;
 	enum ieee80211_if_types itype;
 	struct ieee80211_sub_if_data *sdata;
@@ -95,6 +96,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
 	if (itype == IEEE80211_IF_TYPE_INVALID)
 		return -EINVAL;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	ret = ieee80211_if_change_type(sdata, itype);
@@ -117,12 +121,16 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 			     u8 key_idx, u8 *mac_addr,
 			     struct key_params *params)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta = NULL;
 	enum ieee80211_key_alg alg;
 	struct ieee80211_key *key;
 	int err;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	switch (params->cipher) {
@@ -167,10 +175,14 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 			     u8 key_idx, u8 *mac_addr)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
 	int ret;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	rcu_read_lock();
@@ -211,7 +223,8 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 			     void (*callback)(void *cookie,
 					      struct key_params *params))
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta = NULL;
 	u8 seq[6] = {0};
 	struct key_params params;
@@ -220,6 +233,11 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 	u16 iv16;
 	int err = -ENOENT;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	rcu_read_lock();
 
 	if (mac_addr) {
@@ -293,8 +311,12 @@ static int ieee80211_config_default_key(struct wiphy *wiphy,
 					struct net_device *dev,
 					u8 key_idx)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	rcu_read_lock();
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -475,9 +497,15 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
 static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
 				struct beacon_parameters *params)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct beacon_data *old;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
 		return -EINVAL;
 
@@ -492,9 +520,15 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
 				struct beacon_parameters *params)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct beacon_data *old;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
 		return -EINVAL;
 
@@ -508,9 +542,15 @@ static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
 
 static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct beacon_data *old;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
 		return -EINVAL;
 
@@ -646,11 +686,14 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 				 u8 *mac, struct station_parameters *params)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct sta_info *sta;
 	struct ieee80211_sub_if_data *sdata;
 	int err;
 
+	if (dev == local->mdev || params->vlan == local->mdev)
+		return -EOPNOTSUPP;
+
 	/* Prevent a race with changing the rate control algorithm */
 	if (!netif_running(dev))
 		return -ENETDOWN;
@@ -701,10 +744,15 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
 				 u8 *mac)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (mac) {
 		rcu_read_lock();
 
@@ -730,10 +778,13 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 				    u8 *mac,
 				    struct station_parameters *params)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct sta_info *sta;
 	struct ieee80211_sub_if_data *vlansdata;
 
+	if (dev == local->mdev || params->vlan == local->mdev)
+		return -EOPNOTSUPP;
+
 	rcu_read_lock();
 
 	/* XXX: get sta belonging to dev */
@@ -752,7 +803,7 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 			return -EINVAL;
 		}
 
-		sta->sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
+		sta->sdata = vlansdata;
 		ieee80211_send_layer2_update(sta);
 	}
 
@@ -767,15 +818,20 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
 				 u8 *dst, u8 *next_hop)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 	struct sta_info *sta;
 	int err;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	if (!netif_running(dev))
 		return -ENETDOWN;
 
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
@@ -817,14 +873,19 @@ static int ieee80211_change_mpath(struct wiphy *wiphy,
 				    struct net_device *dev,
 				    u8 *dst, u8 *next_hop)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 	struct sta_info *sta;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	if (!netif_running(dev))
 		return -ENETDOWN;
 
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
@@ -891,9 +952,15 @@ static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
 			       u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
 
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
@@ -913,9 +980,15 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
 				 int idx, u8 *dst, u8 *next_hop,
 				 struct mpath_info *pinfo)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index 7439b63df5d..cf82acec913 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -265,7 +265,7 @@ void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata)
 	key = sdata->default_key;
 	if (key) {
 		sprintf(buf, "../keys/%d", key->debugfs.cnt);
-		sdata->debugfs.default_key =
+		sdata->common_debugfs.default_key =
 			debugfs_create_symlink("default_key",
 					       sdata->debugfsdir, buf);
 	} else
@@ -277,8 +277,8 @@ void ieee80211_debugfs_key_remove_default(struct ieee80211_sub_if_data *sdata)
 	if (!sdata)
 		return;
 
-	debugfs_remove(sdata->debugfs.default_key);
-	sdata->debugfs.default_key = NULL;
+	debugfs_remove(sdata->common_debugfs.default_key);
+	sdata->common_debugfs.default_key = NULL;
 }
 
 void ieee80211_debugfs_key_sta_del(struct ieee80211_key *key,
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 475f89a8aee..8165df578c9 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -248,8 +248,8 @@ IEEE80211_IF_WFILE(min_discovery_timeout,
 static void add_sta_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_ADD(drop_unencrypted, sta);
-	DEBUGFS_ADD(force_unicast_rateidx, ap);
-	DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+	DEBUGFS_ADD(force_unicast_rateidx, sta);
+	DEBUGFS_ADD(max_ratectrl_rateidx, sta);
 
 	DEBUGFS_ADD(state, sta);
 	DEBUGFS_ADD(bssid, sta);
@@ -283,8 +283,8 @@ static void add_ap_files(struct ieee80211_sub_if_data *sdata)
 static void add_wds_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_ADD(drop_unencrypted, wds);
-	DEBUGFS_ADD(force_unicast_rateidx, ap);
-	DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+	DEBUGFS_ADD(force_unicast_rateidx, wds);
+	DEBUGFS_ADD(max_ratectrl_rateidx, wds);
 
 	DEBUGFS_ADD(peer, wds);
 }
@@ -292,8 +292,8 @@ static void add_wds_files(struct ieee80211_sub_if_data *sdata)
 static void add_vlan_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_ADD(drop_unencrypted, vlan);
-	DEBUGFS_ADD(force_unicast_rateidx, ap);
-	DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+	DEBUGFS_ADD(force_unicast_rateidx, vlan);
+	DEBUGFS_ADD(max_ratectrl_rateidx, vlan);
 }
 
 static void add_monitor_files(struct ieee80211_sub_if_data *sdata)
@@ -381,8 +381,8 @@ static void add_files(struct ieee80211_sub_if_data *sdata)
 static void del_sta_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_DEL(drop_unencrypted, sta);
-	DEBUGFS_DEL(force_unicast_rateidx, ap);
-	DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+	DEBUGFS_DEL(force_unicast_rateidx, sta);
+	DEBUGFS_DEL(max_ratectrl_rateidx, sta);
 
 	DEBUGFS_DEL(state, sta);
 	DEBUGFS_DEL(bssid, sta);
@@ -416,8 +416,8 @@ static void del_ap_files(struct ieee80211_sub_if_data *sdata)
 static void del_wds_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_DEL(drop_unencrypted, wds);
-	DEBUGFS_DEL(force_unicast_rateidx, ap);
-	DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+	DEBUGFS_DEL(force_unicast_rateidx, wds);
+	DEBUGFS_DEL(max_ratectrl_rateidx, wds);
 
 	DEBUGFS_DEL(peer, wds);
 }
@@ -425,8 +425,8 @@ static void del_wds_files(struct ieee80211_sub_if_data *sdata)
 static void del_vlan_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_DEL(drop_unencrypted, vlan);
-	DEBUGFS_DEL(force_unicast_rateidx, ap);
-	DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+	DEBUGFS_DEL(force_unicast_rateidx, vlan);
+	DEBUGFS_DEL(max_ratectrl_rateidx, vlan);
 }
 
 static void del_monitor_files(struct ieee80211_sub_if_data *sdata)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index a4f9a832722..4498d871365 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -82,6 +82,7 @@ struct ieee80211_sta_bss {
 
 	u8 bssid[ETH_ALEN];
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 dtim_period;
 	u16 capability; /* host byte order */
 	enum ieee80211_band band;
 	int freq;
@@ -469,6 +470,8 @@ struct ieee80211_sub_if_data {
 			struct dentry *auth_transaction;
 			struct dentry *flags;
 			struct dentry *num_beacons_sta;
+			struct dentry *force_unicast_rateidx;
+			struct dentry *max_ratectrl_rateidx;
 		} sta;
 		struct {
 			struct dentry *drop_unencrypted;
@@ -482,15 +485,21 @@ struct ieee80211_sub_if_data {
 		struct {
 			struct dentry *drop_unencrypted;
 			struct dentry *peer;
+			struct dentry *force_unicast_rateidx;
+			struct dentry *max_ratectrl_rateidx;
 		} wds;
 		struct {
 			struct dentry *drop_unencrypted;
+			struct dentry *force_unicast_rateidx;
+			struct dentry *max_ratectrl_rateidx;
 		} vlan;
 		struct {
 			struct dentry *mode;
 		} monitor;
-		struct dentry *default_key;
 	} debugfs;
+	struct {
+		struct dentry *default_key;
+	} common_debugfs;
 
 #ifdef CONFIG_MAC80211_MESH
 	struct dentry *mesh_stats_dir;
@@ -586,6 +595,7 @@ struct ieee80211_local {
 	struct timer_list sta_cleanup;
 
 	unsigned long queues_pending[BITS_TO_LONGS(IEEE80211_MAX_QUEUES)];
+	unsigned long queues_pending_run[BITS_TO_LONGS(IEEE80211_MAX_QUEUES)];
 	struct ieee80211_tx_stored_packet pending_packet[IEEE80211_MAX_QUEUES];
 	struct tasklet_struct tx_pending_tasklet;
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index f1a83d450ea..aa5a191598c 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -245,10 +245,13 @@ static int ieee80211_open(struct net_device *dev)
 	case IEEE80211_IF_TYPE_AP:
 		sdata->bss = &sdata->u.ap;
 		break;
+	case IEEE80211_IF_TYPE_MESH_POINT:
+		/* mesh ifaces must set allmulti to forward mcast traffic */
+		atomic_inc(&local->iff_allmultis);
+		break;
 	case IEEE80211_IF_TYPE_STA:
 	case IEEE80211_IF_TYPE_MNTR:
 	case IEEE80211_IF_TYPE_IBSS:
-	case IEEE80211_IF_TYPE_MESH_POINT:
 		/* no special treatment */
 		break;
 	case IEEE80211_IF_TYPE_INVALID:
@@ -495,6 +498,9 @@ static int ieee80211_stop(struct net_device *dev)
 		netif_addr_unlock_bh(local->mdev);
 		break;
 	case IEEE80211_IF_TYPE_MESH_POINT:
+		/* allmulti is always set on mesh ifaces */
+		atomic_dec(&local->iff_allmultis);
+		/* fall through */
 	case IEEE80211_IF_TYPE_STA:
 	case IEEE80211_IF_TYPE_IBSS:
 		sdata->u.sta.state = IEEE80211_DISABLED;
@@ -1233,18 +1239,12 @@ static void ieee80211_tasklet_handler(unsigned long data)
 /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
  * make a prepared TX frame (one that has been given to hw) to look like brand
  * new IEEE 802.11 frame that is ready to go through TX processing again.
- * Also, tx_packet_data in cb is restored from tx_control. */
+ */
 static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
 				      struct ieee80211_key *key,
 				      struct sk_buff *skb)
 {
 	int hdrlen, iv_len, mic_len;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
-	info->flags &=	IEEE80211_TX_CTL_REQ_TX_STATUS |
-			IEEE80211_TX_CTL_DO_NOT_ENCRYPT |
-			IEEE80211_TX_CTL_REQUEUE |
-			IEEE80211_TX_CTL_EAPOL_FRAME;
 
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
 
@@ -1695,6 +1695,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	if (local->hw.conf.beacon_int < 10)
 		local->hw.conf.beacon_int = 100;
 
+	if (local->hw.max_listen_interval == 0)
+		local->hw.max_listen_interval = 1;
+
+	local->hw.conf.listen_interval = local->hw.max_listen_interval;
+
 	local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
 						  IEEE80211_HW_SIGNAL_DB |
 						  IEEE80211_HW_SIGNAL_DBM) ?
@@ -1731,8 +1736,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	result = ieee80211_wep_init(local);
 
 	if (result < 0) {
-		printk(KERN_DEBUG "%s: Failed to initialize wep\n",
-		       wiphy_name(local->hw.wiphy));
+		printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+		       wiphy_name(local->hw.wiphy), result);
 		goto fail_wep;
 	}
 
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index b5933b27149..35f2f95f2fa 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -383,7 +383,7 @@ errcopy:
 		hlist_for_each_safe(p, q, &newtbl->hash_buckets[i])
 			tbl->free_node(p, 0);
 	}
-	__mesh_table_free(tbl);
+	__mesh_table_free(newtbl);
 endgrow:
 	return NULL;
 }
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 669eafafe49..7495fbb0d21 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -214,8 +214,7 @@ void ieee80211s_stop(void);
 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata);
 
 /* Mesh paths */
-int mesh_nexthop_lookup(u8 *next_hop, struct sk_buff *skb,
-		struct net_device *dev);
+int mesh_nexthop_lookup(struct sk_buff *skb, struct net_device *dev);
 void mesh_path_start_discovery(struct net_device *dev);
 struct mesh_path *mesh_path_lookup(u8 *dst, struct net_device *dev);
 struct mesh_path *mesh_path_lookup_by_idx(int idx, struct net_device *dev);
@@ -286,6 +285,4 @@ static inline void mesh_path_activate(struct mesh_path *mpath)
 #define mesh_allocated	0
 #endif
 
-#define MESH_PREQ(skb)	(skb->cb + 30)
-
 #endif /* IEEE80211S_H */
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 7fa149e230e..08aca446ca0 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -758,29 +758,30 @@ enddiscovery:
 /**
  * ieee80211s_lookup_nexthop - put the appropriate next hop on a mesh frame
  *
- * @next_hop: output argument for next hop address
- * @skb: frame to be sent
+ * @skb: 802.11 frame to be sent
  * @dev: network device the frame will be sent through
+ * @fwd_frame: true if this frame was originally from a different host
  *
  * Returns: 0 if the next hop was found. Nonzero otherwise. If no next hop is
  * found, the function will start a path discovery and queue the frame so it is
  * sent when the path is resolved. This means the caller must not free the skb
  * in this case.
  */
-int mesh_nexthop_lookup(u8 *next_hop, struct sk_buff *skb,
-		struct net_device *dev)
+int mesh_nexthop_lookup(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct sk_buff *skb_to_free = NULL;
 	struct mesh_path *mpath;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	u8 *dst_addr = hdr->addr3;
 	int err = 0;
 
 	rcu_read_lock();
-	mpath = mesh_path_lookup(skb->data, dev);
+	mpath = mesh_path_lookup(dst_addr, dev);
 
 	if (!mpath) {
-		mesh_path_add(skb->data, dev);
-		mpath = mesh_path_lookup(skb->data, dev);
+		mesh_path_add(dst_addr, dev);
+		mpath = mesh_path_lookup(dst_addr, dev);
 		if (!mpath) {
 			dev_kfree_skb(skb);
 			sdata->u.sta.mshstats.dropped_frames_no_route++;
@@ -792,13 +793,13 @@ int mesh_nexthop_lookup(u8 *next_hop, struct sk_buff *skb,
 	if (mpath->flags & MESH_PATH_ACTIVE) {
 		if (time_after(jiffies, mpath->exp_time -
 			msecs_to_jiffies(sdata->u.sta.mshcfg.path_refresh_time))
-				&& skb->pkt_type != PACKET_OTHERHOST
+				&& !memcmp(dev->dev_addr, hdr->addr4, ETH_ALEN)
 				&& !(mpath->flags & MESH_PATH_RESOLVING)
 				&& !(mpath->flags & MESH_PATH_FIXED)) {
 			mesh_queue_preq(mpath,
 					PREQ_Q_F_START | PREQ_Q_F_REFRESH);
 		}
-		memcpy(next_hop, mpath->next_hop->addr,
+		memcpy(hdr->addr1, mpath->next_hop->addr,
 				ETH_ALEN);
 	} else {
 		if (!(mpath->flags & MESH_PATH_RESOLVING)) {
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 5f88a2e6ee5..838ee60492a 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -388,18 +388,15 @@ void mesh_path_tx_pending(struct mesh_path *mpath)
 void mesh_path_discard_frame(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	struct mesh_path *mpath;
 	u32 dsn = 0;
 
-	if (skb->pkt_type == PACKET_OTHERHOST) {
-		struct ieee80211s_hdr *prev_meshhdr;
-		int mshhdrlen;
+	if (memcmp(hdr->addr4, dev->dev_addr, ETH_ALEN) != 0) {
 		u8 *ra, *da;
 
-		prev_meshhdr = ((struct ieee80211s_hdr *)skb->cb);
-		mshhdrlen = ieee80211_get_mesh_hdrlen(prev_meshhdr);
-		da = skb->data;
-		ra = MESH_PREQ(skb);
+		da = hdr->addr3;
+		ra = hdr->addr2;
 		mpath = mesh_path_lookup(da, dev);
 		if (mpath)
 			dsn = ++mpath->dsn;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index d7c371e36bf..902cac1bd24 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -551,6 +551,7 @@ static void ieee80211_set_associated(struct net_device *dev,
 			/* set timing information */
 			sdata->bss_conf.beacon_int = bss->beacon_int;
 			sdata->bss_conf.timestamp = bss->timestamp;
+			sdata->bss_conf.dtim_period = bss->dtim_period;
 
 			changed |= ieee80211_handle_bss_capability(sdata, bss);
 
@@ -606,7 +607,6 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
 		      int encrypt)
 {
 	struct ieee80211_sub_if_data *sdata;
-	struct ieee80211_tx_info *info;
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	skb->dev = sdata->local->mdev;
@@ -614,11 +614,8 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
 	skb_set_network_header(skb, 0);
 	skb_set_transport_header(skb, 0);
 
-	info = IEEE80211_SKB_CB(skb);
-	memset(info, 0, sizeof(struct ieee80211_tx_info));
-	info->control.ifindex = sdata->dev->ifindex;
-	if (!encrypt)
-		info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+	skb->iif = sdata->dev->ifindex;
+	skb->do_not_encrypt = !encrypt;
 
 	dev_queue_xmit(skb);
 }
@@ -777,7 +774,8 @@ static void ieee80211_send_assoc(struct net_device *dev,
 		mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
 						   IEEE80211_STYPE_REASSOC_REQ);
 		mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
-		mgmt->u.reassoc_req.listen_interval = cpu_to_le16(1);
+		mgmt->u.reassoc_req.listen_interval =
+				cpu_to_le16(local->hw.conf.listen_interval);
 		memcpy(mgmt->u.reassoc_req.current_ap, ifsta->prev_bssid,
 		       ETH_ALEN);
 	} else {
@@ -785,7 +783,8 @@ static void ieee80211_send_assoc(struct net_device *dev,
 		mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
 						   IEEE80211_STYPE_ASSOC_REQ);
 		mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
-		mgmt->u.assoc_req.listen_interval = cpu_to_le16(1);
+		mgmt->u.reassoc_req.listen_interval =
+				cpu_to_le16(local->hw.conf.listen_interval);
 	}
 
 	/* SSID */
@@ -814,7 +813,7 @@ static void ieee80211_send_assoc(struct net_device *dev,
 		}
 	}
 
-	if (count == 8) {
+	if (rates_len > count) {
 		pos = skb_put(skb, rates_len - count + 2);
 		*pos++ = WLAN_EID_EXT_SUPP_RATES;
 		*pos++ = rates_len - count;
@@ -2104,6 +2103,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 			rcu_read_unlock();
 			return;
 		}
+		/* update new sta with its last rx activity */
+		sta->last_rx = jiffies;
 	}
 
 	/*
@@ -2692,6 +2693,16 @@ static void ieee80211_rx_bss_info(struct net_device *dev,
 	bss->beacon_int = le16_to_cpu(mgmt->u.beacon.beacon_int);
 	bss->capability = le16_to_cpu(mgmt->u.beacon.capab_info);
 
+	if (elems->tim) {
+		struct ieee80211_tim_ie *tim_ie =
+			(struct ieee80211_tim_ie *)elems->tim;
+		bss->dtim_period = tim_ie->dtim_period;
+	}
+
+	/* set default value for buggy APs */
+	if (!elems->tim || bss->dtim_period == 0)
+		bss->dtim_period = 1;
+
 	bss->supp_rates_len = 0;
 	if (elems->supp_rates) {
 		clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len;
@@ -2857,7 +2868,7 @@ static void ieee80211_rx_bss_info(struct net_device *dev,
 		       jiffies);
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
 		if (beacon_timestamp > rx_timestamp) {
-#ifndef CONFIG_MAC80211_IBSS_DEBUG
+#ifdef CONFIG_MAC80211_IBSS_DEBUG
 			printk(KERN_DEBUG "%s: beacon TSF higher than "
 			       "local TSF - IBSS merge with BSSID %s\n",
 			       dev->name, print_mac(mac, mgmt->bssid));
@@ -3303,6 +3314,7 @@ void ieee80211_start_mesh(struct net_device *dev)
 	ifsta = &sdata->u.sta;
 	ifsta->state = IEEE80211_MESH_UP;
 	ieee80211_sta_timer((unsigned long)sdata);
+	ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON);
 }
 #endif
 
@@ -3653,11 +3665,21 @@ static int ieee80211_sta_find_ibss(struct net_device *dev,
 		       "%s\n", print_mac(mac, bssid),
 		       print_mac(mac2, ifsta->bssid));
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
-	if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 &&
-	    (bss = ieee80211_rx_bss_get(dev, bssid,
-					local->hw.conf.channel->center_freq,
-					ifsta->ssid, ifsta->ssid_len))) {
+
+	if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0) {
 		int ret;
+		int search_freq;
+
+		if (ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL)
+			search_freq = bss->freq;
+		else
+			search_freq = local->hw.conf.channel->center_freq;
+
+		bss = ieee80211_rx_bss_get(dev, bssid, search_freq,
+					   ifsta->ssid, ifsta->ssid_len);
+		if (!bss)
+			goto dont_join;
+
 		printk(KERN_DEBUG "%s: Selected IBSS BSSID %s"
 		       " based on configured SSID\n",
 		       dev->name, print_mac(mac, bssid));
@@ -3665,6 +3687,8 @@ static int ieee80211_sta_find_ibss(struct net_device *dev,
 		ieee80211_rx_bss_put(local, bss);
 		return ret;
 	}
+
+dont_join:
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 	printk(KERN_DEBUG "   did not try to join ibss\n");
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
@@ -3898,7 +3922,7 @@ done:
 	if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
 		struct ieee80211_if_sta *ifsta = &sdata->u.sta;
 		if (!(ifsta->flags & IEEE80211_STA_BSSID_SET) ||
-		    (!ifsta->state == IEEE80211_IBSS_JOINED &&
+		    (!(ifsta->state == IEEE80211_IBSS_JOINED) &&
 		    !ieee80211_sta_active_ibss(dev)))
 			ieee80211_sta_find_ibss(dev, ifsta);
 	}
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 6d9ae67c27c..6db85450519 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1109,20 +1109,9 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
 
 	hdrlen = ieee80211_get_hdrlen(fc);
 
-	if (ieee80211_vif_is_mesh(&sdata->vif)) {
-		int meshhdrlen = ieee80211_get_mesh_hdrlen(
+	if (ieee80211_vif_is_mesh(&sdata->vif))
+		hdrlen += ieee80211_get_mesh_hdrlen(
 				(struct ieee80211s_hdr *) (skb->data + hdrlen));
-		/* Copy on cb:
-		 *  - mesh header: to be used for mesh forwarding
-		 * decision. It will also be used as mesh header template at
-		 * tx.c:ieee80211_subif_start_xmit() if interface
-		 * type is mesh and skb->pkt_type == PACKET_OTHERHOST
-		 *  - ta: to be used if a RERR needs to be sent.
-		 */
-		memcpy(skb->cb, skb->data + hdrlen, meshhdrlen);
-		memcpy(MESH_PREQ(skb), hdr->addr2, ETH_ALEN);
-		hdrlen += meshhdrlen;
-	}
 
 	/* convert IEEE 802.11 header + possible LLC headers into Ethernet
 	 * header
@@ -1269,38 +1258,6 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
 		}
 	}
 
-	/* Mesh forwarding */
-	if (ieee80211_vif_is_mesh(&sdata->vif)) {
-		u8 *mesh_ttl = &((struct ieee80211s_hdr *)skb->cb)->ttl;
-		(*mesh_ttl)--;
-
-		if (is_multicast_ether_addr(skb->data)) {
-			if (*mesh_ttl > 0) {
-				xmit_skb = skb_copy(skb, GFP_ATOMIC);
-				if (xmit_skb)
-					xmit_skb->pkt_type = PACKET_OTHERHOST;
-				else if (net_ratelimit())
-					printk(KERN_DEBUG "%s: failed to clone "
-					       "multicast frame\n", dev->name);
-			} else
-				IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.sta,
-							     dropped_frames_ttl);
-		} else if (skb->pkt_type != PACKET_OTHERHOST &&
-			compare_ether_addr(dev->dev_addr, skb->data) != 0) {
-			if (*mesh_ttl == 0) {
-				IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.sta,
-							     dropped_frames_ttl);
-				dev_kfree_skb(skb);
-				skb = NULL;
-			} else {
-				xmit_skb = skb;
-				xmit_skb->pkt_type = PACKET_OTHERHOST;
-				if (!(dev->flags & IFF_PROMISC))
-					skb  = NULL;
-			}
-		}
-	}
-
 	if (skb) {
 		/* deliver to local stack */
 		skb->protocol = eth_type_trans(skb, dev);
@@ -1431,6 +1388,63 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx)
 }
 
 static ieee80211_rx_result debug_noinline
+ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
+{
+	struct ieee80211_hdr *hdr;
+	struct ieee80211s_hdr *mesh_hdr;
+	unsigned int hdrlen;
+	struct sk_buff *skb = rx->skb, *fwd_skb;
+
+	hdr = (struct ieee80211_hdr *) skb->data;
+	hdrlen = ieee80211_hdrlen(hdr->frame_control);
+	mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
+
+	if (!ieee80211_is_data(hdr->frame_control))
+		return RX_CONTINUE;
+
+	if (!mesh_hdr->ttl)
+		/* illegal frame */
+		return RX_DROP_MONITOR;
+
+	if (compare_ether_addr(rx->dev->dev_addr, hdr->addr3) == 0)
+		return RX_CONTINUE;
+
+	mesh_hdr->ttl--;
+
+	if (rx->flags & IEEE80211_RX_RA_MATCH) {
+		if (!mesh_hdr->ttl)
+			IEEE80211_IFSTA_MESH_CTR_INC(&rx->sdata->u.sta,
+						     dropped_frames_ttl);
+		else {
+			struct ieee80211_hdr *fwd_hdr;
+			fwd_skb = skb_copy(skb, GFP_ATOMIC);
+
+			if (!fwd_skb && net_ratelimit())
+				printk(KERN_DEBUG "%s: failed to clone mesh frame\n",
+						   rx->dev->name);
+
+			fwd_hdr =  (struct ieee80211_hdr *) fwd_skb->data;
+			/*
+			 * Save TA to addr1 to send TA a path error if a
+			 * suitable next hop is not found
+			 */
+			memcpy(fwd_hdr->addr1, fwd_hdr->addr2, ETH_ALEN);
+			memcpy(fwd_hdr->addr2, rx->dev->dev_addr, ETH_ALEN);
+			fwd_skb->dev = rx->local->mdev;
+			fwd_skb->iif = rx->dev->ifindex;
+			dev_queue_xmit(fwd_skb);
+		}
+	}
+
+	if (is_multicast_ether_addr(hdr->addr3) ||
+	    rx->dev->flags & IFF_PROMISC)
+		return RX_CONTINUE;
+	else
+		return RX_DROP_MONITOR;
+}
+
+
+static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
 {
 	struct net_device *dev = rx->dev;
@@ -1663,10 +1677,12 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
 	rx->sdata = sdata;
 	rx->dev = sdata->dev;
 
-#define CALL_RXH(rxh)		\
-	res = rxh(rx);		\
-	if (res != RX_CONTINUE)	\
-		goto rxh_done;
+#define CALL_RXH(rxh)			\
+	do {				\
+		res = rxh(rx);		\
+		if (res != RX_CONTINUE)	\
+			goto rxh_done;  \
+	} while (0);
 
 	CALL_RXH(ieee80211_rx_h_passive_scan)
 	CALL_RXH(ieee80211_rx_h_check)
@@ -1678,6 +1694,8 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
 	/* must be after MMIC verify so header is counted in MPDU mic */
 	CALL_RXH(ieee80211_rx_h_remove_qos_control)
 	CALL_RXH(ieee80211_rx_h_amsdu)
+	if (ieee80211_vif_is_mesh(&sdata->vif))
+		CALL_RXH(ieee80211_rx_h_mesh_fwding);
 	CALL_RXH(ieee80211_rx_h_data)
 	CALL_RXH(ieee80211_rx_h_ctrl)
 	CALL_RXH(ieee80211_rx_h_mgmt)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 0fbadd8b983..4788f7b91f4 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -305,7 +305,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local)
 	rcu_read_unlock();
 
 	local->total_ps_buffered = total;
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 	printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n",
 	       wiphy_name(local->hw.wiphy), purged);
 #endif
@@ -342,7 +342,7 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx)
 			purge_old_ps_buffers(tx->local);
 		if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >=
 		    AP_MAX_BC_BUFFER) {
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 			if (net_ratelimit()) {
 				printk(KERN_DEBUG "%s: BC TX buffer full - "
 				       "dropping the oldest frame\n",
@@ -389,7 +389,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 			purge_old_ps_buffers(tx->local);
 		if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) {
 			struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf);
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 			if (net_ratelimit()) {
 				printk(KERN_DEBUG "%s: STA %s TX "
 				       "buffer full - dropping oldest frame\n",
@@ -439,14 +439,14 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
 	u16 fc = tx->fc;
 
-	if (unlikely(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+	if (unlikely(tx->skb->do_not_encrypt))
 		tx->key = NULL;
 	else if (tx->sta && (key = rcu_dereference(tx->sta->key)))
 		tx->key = key;
 	else if ((key = rcu_dereference(tx->sdata->default_key)))
 		tx->key = key;
 	else if (tx->sdata->drop_unencrypted &&
-		 !(info->flags & IEEE80211_TX_CTL_EAPOL_FRAME) &&
+		 (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) &&
 		 !(info->flags & IEEE80211_TX_CTL_INJECTED)) {
 		I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
 		return TX_DROP;
@@ -476,7 +476,7 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
 	}
 
 	if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
-		info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+		tx->skb->do_not_encrypt = 1;
 
 	return TX_CONTINUE;
 }
@@ -732,6 +732,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
 		memcpy(skb_put(frag, copylen), pos, copylen);
 		memcpy(frag->cb, first->cb, sizeof(frag->cb));
 		skb_copy_queue_mapping(frag, first);
+		frag->do_not_encrypt = first->do_not_encrypt;
 
 		pos += copylen;
 		left -= copylen;
@@ -852,7 +853,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 
 	sband = tx->local->hw.wiphy->bands[tx->channel->band];
 
-	info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+	skb->do_not_encrypt = 1;
 	info->flags |= IEEE80211_TX_CTL_INJECTED;
 	tx->flags &= ~IEEE80211_TX_FRAGMENTED;
 
@@ -925,8 +926,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 				skb_trim(skb, skb->len - FCS_LEN);
 			}
 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
-				info->flags &=
-					~IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+				tx->skb->do_not_encrypt = 0;
 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
 				tx->flags |= IEEE80211_TX_FRAGMENTED;
 			break;
@@ -1042,10 +1042,9 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
 				struct sk_buff *skb,
 				struct net_device *mdev)
 {
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct net_device *dev;
 
-	dev = dev_get_by_index(&init_net, info->control.ifindex);
+	dev = dev_get_by_index(&init_net, skb->iif);
 	if (unlikely(dev && !is_ieee80211_device(dev, mdev))) {
 		dev_put(dev);
 		dev = NULL;
@@ -1061,13 +1060,14 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
 static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb,
 			  struct ieee80211_tx_data *tx)
 {
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_tx_info *info;
 	int ret, i;
 
-	if (netif_subqueue_stopped(local->mdev, skb))
-		return IEEE80211_TX_AGAIN;
-
 	if (skb) {
+		if (netif_subqueue_stopped(local->mdev, skb))
+			return IEEE80211_TX_AGAIN;
+		info =  IEEE80211_SKB_CB(skb);
+
 		ieee80211_dump_frame(wiphy_name(local->hw.wiphy),
 				     "TX to low-level driver", skb);
 		ret = local->ops->tx(local_to_hw(local), skb);
@@ -1216,6 +1216,7 @@ retry:
 
 		if (ret == IEEE80211_TX_FRAG_AGAIN)
 			skb = NULL;
+
 		set_bit(queue, local->queues_pending);
 		smp_mb();
 		/*
@@ -1300,14 +1301,15 @@ int ieee80211_master_start_xmit(struct sk_buff *skb,
 				struct net_device *dev)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	struct net_device *odev = NULL;
 	struct ieee80211_sub_if_data *osdata;
 	int headroom;
 	bool may_encrypt;
 	int ret;
 
-	if (info->control.ifindex)
-		odev = dev_get_by_index(&init_net, info->control.ifindex);
+	if (skb->iif)
+		odev = dev_get_by_index(&init_net, skb->iif);
 	if (unlikely(odev && !is_ieee80211_device(odev, dev))) {
 		dev_put(odev);
 		odev = NULL;
@@ -1321,9 +1323,27 @@ int ieee80211_master_start_xmit(struct sk_buff *skb,
 		return 0;
 	}
 
+	memset(info, 0, sizeof(*info));
+
+	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+
 	osdata = IEEE80211_DEV_TO_SUB_IF(odev);
 
-	may_encrypt = !(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT);
+	if (ieee80211_vif_is_mesh(&osdata->vif) &&
+	    ieee80211_is_data(hdr->frame_control)) {
+		if (ieee80211_is_data(hdr->frame_control)) {
+			if (is_multicast_ether_addr(hdr->addr3))
+				memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
+			else
+				if (mesh_nexthop_lookup(skb, odev))
+					return  0;
+			if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
+				IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.sta,
+							     fwded_frames);
+		}
+	}
+
+	may_encrypt = !skb->do_not_encrypt;
 
 	headroom = osdata->local->tx_headroom;
 	if (may_encrypt)
@@ -1348,7 +1368,6 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
 				 struct net_device *dev)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_radiotap_header *prthdr =
 		(struct ieee80211_radiotap_header *)skb->data;
 	u16 len_rthdr;
@@ -1371,11 +1390,11 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
 	skb->dev = local->mdev;
 
 	/* needed because we set skb device to master */
-	info->control.ifindex = dev->ifindex;
+	skb->iif = dev->ifindex;
 
-	info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
-	/* Interfaces should always request a status report */
-	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+	/* sometimes we do encrypt injected frames, will be fixed
+	 * up in radiotap parser if not wanted */
+	skb->do_not_encrypt = 0;
 
 	/*
 	 * fix up the pointers accounting for the radiotap
@@ -1419,7 +1438,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 			       struct net_device *dev)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_tx_info *info;
 	struct ieee80211_sub_if_data *sdata;
 	int ret = 1, head_need;
 	u16 ethertype, hdrlen,  meshhdrlen = 0;
@@ -1469,30 +1487,17 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 	case IEEE80211_IF_TYPE_MESH_POINT:
 		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
 		/* RA TA DA SA */
-		if (is_multicast_ether_addr(skb->data))
-			memcpy(hdr.addr1, skb->data, ETH_ALEN);
-		else if (mesh_nexthop_lookup(hdr.addr1, skb, dev))
-				return 0;
+		memset(hdr.addr1, 0, ETH_ALEN);
 		memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
 		memcpy(hdr.addr3, skb->data, ETH_ALEN);
 		memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
-		if (skb->pkt_type == PACKET_OTHERHOST) {
-			/* Forwarded frame, keep mesh ttl and seqnum */
-			struct ieee80211s_hdr *prev_meshhdr;
-			prev_meshhdr = ((struct ieee80211s_hdr *)skb->cb);
-			meshhdrlen = ieee80211_get_mesh_hdrlen(prev_meshhdr);
-			memcpy(&mesh_hdr, prev_meshhdr, meshhdrlen);
-			sdata->u.sta.mshstats.fwded_frames++;
-		} else {
-			if (!sdata->u.sta.mshcfg.dot11MeshTTL) {
-				/* Do not send frames with mesh_ttl == 0 */
-				sdata->u.sta.mshstats.dropped_frames_ttl++;
-				ret = 0;
-				goto fail;
-			}
-			meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr,
-							       sdata);
+		if (!sdata->u.sta.mshcfg.dot11MeshTTL) {
+			/* Do not send frames with mesh_ttl == 0 */
+			sdata->u.sta.mshstats.dropped_frames_ttl++;
+			ret = 0;
+			goto fail;
 		}
+		meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata);
 		hdrlen = 30;
 		break;
 #endif
@@ -1540,7 +1545,8 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 	 * Drop unicast frames to unauthorised stations unless they are
 	 * EAPOL frames from the local station.
 	 */
-	if (unlikely(!is_multicast_ether_addr(hdr.addr1) &&
+	if (!ieee80211_vif_is_mesh(&sdata->vif) &&
+		unlikely(!is_multicast_ether_addr(hdr.addr1) &&
 		      !(sta_flags & WLAN_STA_AUTHORIZED) &&
 		      !(ethertype == ETH_P_PAE &&
 		       compare_ether_addr(dev->dev_addr,
@@ -1645,14 +1651,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 	nh_pos += hdrlen;
 	h_pos += hdrlen;
 
-	info = IEEE80211_SKB_CB(skb);
-	memset(info, 0, sizeof(*info));
-	info->control.ifindex = dev->ifindex;
-	if (ethertype == ETH_P_PAE)
-		info->flags |= IEEE80211_TX_CTL_EAPOL_FRAME;
-
-	/* Interfaces should always request a status report */
-	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+	skb->iif = dev->ifindex;
 
 	skb->dev = local->mdev;
 	dev->stats.tx_packets++;
@@ -1714,14 +1713,19 @@ void ieee80211_tx_pending(unsigned long data)
 	netif_tx_lock_bh(dev);
 	for (i = 0; i < ieee80211_num_regular_queues(&local->hw); i++) {
 		/* Check that this queue is ok */
-		if (__netif_subqueue_stopped(local->mdev, i))
+		if (__netif_subqueue_stopped(local->mdev, i) &&
+		    !test_bit(i, local->queues_pending_run))
 			continue;
 
 		if (!test_bit(i, local->queues_pending)) {
+			clear_bit(i, local->queues_pending_run);
 			ieee80211_wake_queue(&local->hw, i);
 			continue;
 		}
 
+		clear_bit(i, local->queues_pending_run);
+		netif_start_subqueue(local->mdev, i);
+
 		store = &local->pending_packet[i];
 		tx.extra_frag = store->extra_frag;
 		tx.num_extra_frag = store->num_extra_frag;
@@ -1922,6 +1926,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 
 	info = IEEE80211_SKB_CB(skb);
 
+	skb->do_not_encrypt = 1;
+
 	info->band = band;
 	rate_control_get_rate(local->mdev, sband, skb, &rsel);
 
@@ -1931,7 +1937,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 			       "no rate found\n",
 			       wiphy_name(local->hw.wiphy));
 		}
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		skb = NULL;
 		goto out;
 	}
@@ -1940,7 +1946,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 	info->tx_rate_idx = rsel.rate_idx;
 
 	info->flags |= IEEE80211_TX_CTL_NO_ACK;
-	info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
 	info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
 	info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
 	if (sdata->bss_conf.use_short_preamble &&
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 19f85e1b369..0d463c80c40 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -361,6 +361,7 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue)
 	struct ieee80211_local *local = hw_to_local(hw);
 
 	if (test_bit(queue, local->queues_pending)) {
+		set_bit(queue, local->queues_pending_run);
 		tasklet_schedule(&local->tx_pending_tasklet);
 	} else {
 		netif_wake_subqueue(local->mdev, queue);
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index 872d2fcd1a5..5c2bf0a3d4d 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -31,13 +31,13 @@ int ieee80211_wep_init(struct ieee80211_local *local)
 	local->wep_tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
 						CRYPTO_ALG_ASYNC);
 	if (IS_ERR(local->wep_tx_tfm))
-		return -ENOMEM;
+		return PTR_ERR(local->wep_tx_tfm);
 
 	local->wep_rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
 						CRYPTO_ALG_ASYNC);
 	if (IS_ERR(local->wep_rx_tfm)) {
 		crypto_free_blkcipher(local->wep_tx_tfm);
-		return -ENOMEM;
+		return PTR_ERR(local->wep_rx_tfm);
 	}
 
 	return 0;
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 07edda0b8a5..4310e2f6566 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -188,6 +188,9 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local,
 {
 	int i;
 
+	/* XXX: currently broken due to cb/requeue use */
+	return -EPERM;
+
 	/* prepare the filter and save it for the SW queue
 	 * matching the received HW queue */
 
@@ -238,12 +241,14 @@ void ieee80211_ht_agg_queue_remove(struct ieee80211_local *local,
 	} else {
 		struct netdev_queue *txq;
 		spinlock_t *root_lock;
+		struct Qdisc *q;
 
 		txq = netdev_get_tx_queue(local->mdev, agg_queue);
-		root_lock = qdisc_root_lock(txq->qdisc);
+		q = rcu_dereference(txq->qdisc);
+		root_lock = qdisc_lock(q);
 
 		spin_lock_bh(root_lock);
-		qdisc_reset(txq->qdisc);
+		qdisc_reset(q);
 		spin_unlock_bh(root_lock);
 	}
 }
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index c519d090bdb..9d1830da8e8 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1032,10 +1032,10 @@ void nf_conntrack_cleanup(void)
 	nf_ct_free_hashtable(nf_conntrack_hash, nf_conntrack_vmalloc,
 			     nf_conntrack_htable_size);
 
-	nf_conntrack_proto_fini();
-	nf_conntrack_helper_fini();
-	nf_conntrack_expect_fini();
 	nf_conntrack_acct_fini();
+	nf_conntrack_expect_fini();
+	nf_conntrack_helper_fini();
+	nf_conntrack_proto_fini();
 }
 
 struct hlist_head *nf_ct_alloc_hashtable(unsigned int *sizep, int *vmalloced)
diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c
index 1b1226d6653..20633fdf7e6 100644
--- a/net/netfilter/nf_conntrack_irc.c
+++ b/net/netfilter/nf_conntrack_irc.c
@@ -68,11 +68,21 @@ static const char *const dccprotos[] = {
 static int parse_dcc(char *data, const char *data_end, u_int32_t *ip,
 		     u_int16_t *port, char **ad_beg_p, char **ad_end_p)
 {
+	char *tmp;
+
 	/* at least 12: "AAAAAAAA P\1\n" */
 	while (*data++ != ' ')
 		if (data > data_end - 12)
 			return -1;
 
+	/* Make sure we have a newline character within the packet boundaries
+	 * because simple_strtoul parses until the first invalid character. */
+	for (tmp = data; tmp <= data_end; tmp++)
+		if (*tmp == '\n')
+			break;
+	if (tmp > data_end || *tmp != '\n')
+		return -1;
+
 	*ad_beg_p = data;
 	*ip = simple_strtoul(data, &data, 10);
 
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 105a616c5c7..a8752031adc 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -968,7 +968,7 @@ ctnetlink_change_helper(struct nf_conn *ct, struct nlattr *cda[])
 		/* need to zero data of old helper */
 		memset(&help->help, 0, sizeof(help->help));
 	} else {
-		help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
+		help = nf_ct_helper_ext_add(ct, GFP_ATOMIC);
 		if (help == NULL)
 			return -ENOMEM;
 	}
@@ -1136,16 +1136,33 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 	ct->timeout.expires = jiffies + ct->timeout.expires * HZ;
 	ct->status |= IPS_CONFIRMED;
 
+	rcu_read_lock();
+	helper = __nf_ct_helper_find(rtuple);
+	if (helper) {
+		help = nf_ct_helper_ext_add(ct, GFP_ATOMIC);
+		if (help == NULL) {
+			rcu_read_unlock();
+			err = -ENOMEM;
+			goto err;
+		}
+		/* not in hash table yet so not strictly necessary */
+		rcu_assign_pointer(help->helper, helper);
+	}
+
 	if (cda[CTA_STATUS]) {
 		err = ctnetlink_change_status(ct, cda);
-		if (err < 0)
+		if (err < 0) {
+			rcu_read_unlock();
 			goto err;
+		}
 	}
 
 	if (cda[CTA_PROTOINFO]) {
 		err = ctnetlink_change_protoinfo(ct, cda);
-		if (err < 0)
+		if (err < 0) {
+			rcu_read_unlock();
 			goto err;
+		}
 	}
 
 	nf_ct_acct_ext_add(ct, GFP_KERNEL);
@@ -1155,19 +1172,6 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 		ct->mark = ntohl(nla_get_be32(cda[CTA_MARK]));
 #endif
 
-	rcu_read_lock();
-	helper = __nf_ct_helper_find(rtuple);
-	if (helper) {
-		help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
-		if (help == NULL) {
-			rcu_read_unlock();
-			err = -ENOMEM;
-			goto err;
-		}
-		/* not in hash table yet so not strictly necessary */
-		rcu_assign_pointer(help->helper, helper);
-	}
-
 	/* setup master conntrack: this is a confirmed expectation */
 	if (master_ct) {
 		__set_bit(IPS_EXPECTED_BIT, &ct->status);
diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c
index 654a4f7f12c..9bd03967fea 100644
--- a/net/netfilter/nf_conntrack_proto_gre.c
+++ b/net/netfilter/nf_conntrack_proto_gre.c
@@ -45,12 +45,12 @@ static LIST_HEAD(gre_keymap_list);
 
 void nf_ct_gre_keymap_flush(void)
 {
-	struct list_head *pos, *n;
+	struct nf_ct_gre_keymap *km, *tmp;
 
 	write_lock_bh(&nf_ct_gre_lock);
-	list_for_each_safe(pos, n, &gre_keymap_list) {
-		list_del(pos);
-		kfree(pos);
+	list_for_each_entry_safe(km, tmp, &gre_keymap_list, list) {
+		list_del(&km->list);
+		kfree(km);
 	}
 	write_unlock_bh(&nf_ct_gre_lock);
 }
@@ -97,10 +97,14 @@ int nf_ct_gre_keymap_add(struct nf_conn *ct, enum ip_conntrack_dir dir,
 	kmp = &help->help.ct_pptp_info.keymap[dir];
 	if (*kmp) {
 		/* check whether it's a retransmission */
+		read_lock_bh(&nf_ct_gre_lock);
 		list_for_each_entry(km, &gre_keymap_list, list) {
-			if (gre_key_cmpfn(km, t) && km == *kmp)
+			if (gre_key_cmpfn(km, t) && km == *kmp) {
+				read_unlock_bh(&nf_ct_gre_lock);
 				return 0;
+			}
 		}
+		read_unlock_bh(&nf_ct_gre_lock);
 		pr_debug("trying to override keymap_%s for ct %p\n",
 			 dir == IP_CT_DIR_REPLY ? "reply" : "orig", ct);
 		return -EEXIST;
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 420a10d8eb1..6f61261888e 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -67,7 +67,8 @@ static const char *const tcp_conntrack_names[] = {
 /* RFC1122 says the R2 limit should be at least 100 seconds.
    Linux uses 15 packets as limit, which corresponds
    to ~13-30min depending on RTO. */
-static unsigned int nf_ct_tcp_timeout_max_retrans __read_mostly =   5 MINS;
+static unsigned int nf_ct_tcp_timeout_max_retrans __read_mostly    =   5 MINS;
+static unsigned int nf_ct_tcp_timeout_unacknowledged __read_mostly =   5 MINS;
 
 static unsigned int tcp_timeouts[TCP_CONNTRACK_MAX] __read_mostly = {
 	[TCP_CONNTRACK_SYN_SENT]	= 2 MINS,
@@ -625,8 +626,10 @@ static bool tcp_in_window(const struct nf_conn *ct,
 		swin = win + (sack - ack);
 		if (sender->td_maxwin < swin)
 			sender->td_maxwin = swin;
-		if (after(end, sender->td_end))
+		if (after(end, sender->td_end)) {
 			sender->td_end = end;
+			sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED;
+		}
 		/*
 		 * Update receiver data.
 		 */
@@ -637,6 +640,8 @@ static bool tcp_in_window(const struct nf_conn *ct,
 			if (win == 0)
 				receiver->td_maxend++;
 		}
+		if (ack == receiver->td_end)
+			receiver->flags &= ~IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED;
 
 		/*
 		 * Check retransmissions.
@@ -951,9 +956,16 @@ static int tcp_packet(struct nf_conn *ct,
 	if (old_state != new_state
 	    && new_state == TCP_CONNTRACK_FIN_WAIT)
 		ct->proto.tcp.seen[dir].flags |= IP_CT_TCP_FLAG_CLOSE_INIT;
-	timeout = ct->proto.tcp.retrans >= nf_ct_tcp_max_retrans
-		  && tcp_timeouts[new_state] > nf_ct_tcp_timeout_max_retrans
-		  ? nf_ct_tcp_timeout_max_retrans : tcp_timeouts[new_state];
+
+	if (ct->proto.tcp.retrans >= nf_ct_tcp_max_retrans &&
+	    tcp_timeouts[new_state] > nf_ct_tcp_timeout_max_retrans)
+		timeout = nf_ct_tcp_timeout_max_retrans;
+	else if ((ct->proto.tcp.seen[0].flags | ct->proto.tcp.seen[1].flags) &
+		 IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED &&
+		 tcp_timeouts[new_state] > nf_ct_tcp_timeout_unacknowledged)
+		timeout = nf_ct_tcp_timeout_unacknowledged;
+	else
+		timeout = tcp_timeouts[new_state];
 	write_unlock_bh(&tcp_lock);
 
 	nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, skb);
@@ -1236,6 +1248,13 @@ static struct ctl_table tcp_sysctl_table[] = {
 		.proc_handler	= &proc_dointvec_jiffies,
 	},
 	{
+		.procname	= "nf_conntrack_tcp_timeout_unacknowledged",
+		.data		= &nf_ct_tcp_timeout_unacknowledged,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_jiffies,
+	},
+	{
 		.ctl_name	= NET_NF_CONNTRACK_TCP_LOOSE,
 		.procname	= "nf_conntrack_tcp_loose",
 		.data		= &nf_ct_tcp_loose,
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index 2f9bbc058b4..1fa306be60f 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -1193,7 +1193,6 @@ static const struct sip_handler sip_handlers[] = {
 static int process_sip_response(struct sk_buff *skb,
 				const char **dptr, unsigned int *datalen)
 {
-	static const struct sip_handler *handler;
 	enum ip_conntrack_info ctinfo;
 	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
 	unsigned int matchoff, matchlen;
@@ -1214,6 +1213,8 @@ static int process_sip_response(struct sk_buff *skb,
 	dataoff = matchoff + matchlen + 1;
 
 	for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
+		const struct sip_handler *handler;
+
 		handler = &sip_handlers[i];
 		if (handler->response == NULL)
 			continue;
@@ -1228,13 +1229,14 @@ static int process_sip_response(struct sk_buff *skb,
 static int process_sip_request(struct sk_buff *skb,
 			       const char **dptr, unsigned int *datalen)
 {
-	static const struct sip_handler *handler;
 	enum ip_conntrack_info ctinfo;
 	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
 	unsigned int matchoff, matchlen;
 	unsigned int cseq, i;
 
 	for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
+		const struct sip_handler *handler;
+
 		handler = &sip_handlers[i];
 		if (handler->request == NULL)
 			continue;
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 869ef9349d0..8509db14670 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -324,6 +324,7 @@ static int log_invalid_proto_min = 0;
 static int log_invalid_proto_max = 255;
 
 static struct ctl_table_header *nf_ct_sysctl_header;
+static struct ctl_table_header *nf_ct_netfilter_header;
 
 static ctl_table nf_ct_sysctl_table[] = {
 	{
@@ -384,12 +385,6 @@ static ctl_table nf_ct_sysctl_table[] = {
 
 static ctl_table nf_ct_netfilter_table[] = {
 	{
-		.ctl_name	= NET_NETFILTER,
-		.procname	= "netfilter",
-		.mode		= 0555,
-		.child		= nf_ct_sysctl_table,
-	},
-	{
 		.ctl_name	= NET_NF_CONNTRACK_MAX,
 		.procname	= "nf_conntrack_max",
 		.data		= &nf_conntrack_max,
@@ -409,18 +404,29 @@ EXPORT_SYMBOL_GPL(nf_ct_log_invalid);
 
 static int nf_conntrack_standalone_init_sysctl(void)
 {
-	nf_ct_sysctl_header =
+	nf_ct_netfilter_header =
 		register_sysctl_paths(nf_ct_path, nf_ct_netfilter_table);
-	if (nf_ct_sysctl_header == NULL) {
-		printk("nf_conntrack: can't register to sysctl.\n");
-		return -ENOMEM;
-	}
+	if (!nf_ct_netfilter_header)
+		goto out;
+
+	nf_ct_sysctl_header =
+		 register_sysctl_paths(nf_net_netfilter_sysctl_path,
+					nf_ct_sysctl_table);
+	if (!nf_ct_sysctl_header)
+		goto out_unregister_netfilter;
+
 	return 0;
 
+out_unregister_netfilter:
+	unregister_sysctl_table(nf_ct_netfilter_header);
+out:
+	printk("nf_conntrack: can't register to sysctl.\n");
+	return -ENOMEM;
 }
 
 static void nf_conntrack_standalone_fini_sysctl(void)
 {
+	unregister_sysctl_table(nf_ct_netfilter_header);
 	unregister_sysctl_table(nf_ct_sysctl_header);
 }
 #else
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index 6809af542a2..d9418a26781 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -367,9 +367,7 @@ static void htable_gc(unsigned long htlong)
 
 static void htable_destroy(struct xt_hashlimit_htable *hinfo)
 {
-	/* remove timer, if it is pending */
-	if (timer_pending(&hinfo->timer))
-		del_timer(&hinfo->timer);
+	del_timer_sync(&hinfo->timer);
 
 	/* remove proc entry */
 	remove_proc_entry(hinfo->pde->name,
diff --git a/net/rfkill/rfkill-input.c b/net/rfkill/rfkill-input.c
index 8aa82273014..e5b69556bb5 100644
--- a/net/rfkill/rfkill-input.c
+++ b/net/rfkill/rfkill-input.c
@@ -109,6 +109,25 @@ static DEFINE_RFKILL_TASK(rfkill_uwb, RFKILL_TYPE_UWB);
 static DEFINE_RFKILL_TASK(rfkill_wimax, RFKILL_TYPE_WIMAX);
 static DEFINE_RFKILL_TASK(rfkill_wwan, RFKILL_TYPE_WWAN);
 
+static void rfkill_schedule_evsw_rfkillall(int state)
+{
+	/* EVERY radio type. state != 0 means radios ON */
+	/* handle EPO (emergency power off) through shortcut */
+	if (state) {
+		rfkill_schedule_set(&rfkill_wwan,
+				    RFKILL_STATE_UNBLOCKED);
+		rfkill_schedule_set(&rfkill_wimax,
+				    RFKILL_STATE_UNBLOCKED);
+		rfkill_schedule_set(&rfkill_uwb,
+				    RFKILL_STATE_UNBLOCKED);
+		rfkill_schedule_set(&rfkill_bt,
+				    RFKILL_STATE_UNBLOCKED);
+		rfkill_schedule_set(&rfkill_wlan,
+				    RFKILL_STATE_UNBLOCKED);
+	} else
+		rfkill_schedule_epo();
+}
+
 static void rfkill_event(struct input_handle *handle, unsigned int type,
 			unsigned int code, int data)
 {
@@ -132,21 +151,7 @@ static void rfkill_event(struct input_handle *handle, unsigned int type,
 	} else if (type == EV_SW) {
 		switch (code) {
 		case SW_RFKILL_ALL:
-			/* EVERY radio type. data != 0 means radios ON */
-			/* handle EPO (emergency power off) through shortcut */
-			if (data) {
-				rfkill_schedule_set(&rfkill_wwan,
-						    RFKILL_STATE_UNBLOCKED);
-				rfkill_schedule_set(&rfkill_wimax,
-						    RFKILL_STATE_UNBLOCKED);
-				rfkill_schedule_set(&rfkill_uwb,
-						    RFKILL_STATE_UNBLOCKED);
-				rfkill_schedule_set(&rfkill_bt,
-						    RFKILL_STATE_UNBLOCKED);
-				rfkill_schedule_set(&rfkill_wlan,
-						    RFKILL_STATE_UNBLOCKED);
-			} else
-				rfkill_schedule_epo();
+			rfkill_schedule_evsw_rfkillall(data);
 			break;
 		default:
 			break;
@@ -168,6 +173,7 @@ static int rfkill_connect(struct input_handler *handler, struct input_dev *dev,
 	handle->handler = handler;
 	handle->name = "rfkill";
 
+	/* causes rfkill_start() to be called */
 	error = input_register_handle(handle);
 	if (error)
 		goto err_free_handle;
@@ -185,6 +191,23 @@ static int rfkill_connect(struct input_handler *handler, struct input_dev *dev,
 	return error;
 }
 
+static void rfkill_start(struct input_handle *handle)
+{
+	/* Take event_lock to guard against configuration changes, we
+	 * should be able to deal with concurrency with rfkill_event()
+	 * just fine (which event_lock will also avoid). */
+	spin_lock_irq(&handle->dev->event_lock);
+
+	if (test_bit(EV_SW, handle->dev->evbit)) {
+		if (test_bit(SW_RFKILL_ALL, handle->dev->swbit))
+			rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL,
+							handle->dev->sw));
+		/* add resync for further EV_SW events here */
+	}
+
+	spin_unlock_irq(&handle->dev->event_lock);
+}
+
 static void rfkill_disconnect(struct input_handle *handle)
 {
 	input_close_device(handle);
@@ -225,6 +248,7 @@ static struct input_handler rfkill_handler = {
 	.event =	rfkill_event,
 	.connect =	rfkill_connect,
 	.disconnect =	rfkill_disconnect,
+	.start =	rfkill_start,
 	.name =		"rfkill",
 	.id_table =	rfkill_ids,
 };
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index 7a560b78509..74aecc098ba 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c
@@ -105,6 +105,16 @@ static void rfkill_led_trigger(struct rfkill *rfkill,
 #endif /* CONFIG_RFKILL_LEDS */
 }
 
+#ifdef CONFIG_RFKILL_LEDS
+static void rfkill_led_trigger_activate(struct led_classdev *led)
+{
+	struct rfkill *rfkill = container_of(led->trigger,
+			struct rfkill, led_trigger);
+
+	rfkill_led_trigger(rfkill, rfkill->state);
+}
+#endif /* CONFIG_RFKILL_LEDS */
+
 static void notify_rfkill_state_change(struct rfkill *rfkill)
 {
 	blocking_notifier_call_chain(&rfkill_notifier_list,
@@ -130,7 +140,6 @@ static void update_rfkill_state(struct rfkill *rfkill)
 
 /**
  * rfkill_toggle_radio - wrapper for toggle_radio hook
- *
  * @rfkill: the rfkill struct to use
  * @force: calls toggle_radio even if cache says it is not needed,
  *	and also makes sure notifications of the state will be
@@ -141,8 +150,10 @@ static void update_rfkill_state(struct rfkill *rfkill)
  * calls and handling all the red tape such as issuing notifications
  * if the call is successful.
  *
- * Note that @force cannot override a (possibly cached) state of
- * RFKILL_STATE_HARD_BLOCKED.  Any device making use of
+ * Suspended devices are not touched at all, and -EAGAIN is returned.
+ *
+ * Note that the @force parameter cannot override a (possibly cached)
+ * state of RFKILL_STATE_HARD_BLOCKED.  Any device making use of
  * RFKILL_STATE_HARD_BLOCKED implements either get_state() or
  * rfkill_force_state(), so the cache either is bypassed or valid.
  *
@@ -150,7 +161,7 @@ static void update_rfkill_state(struct rfkill *rfkill)
  * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to
  * give the driver a hint that it should double-BLOCK the transmitter.
  *
- * Caller must have aquired rfkill_mutex.
+ * Caller must have acquired rfkill->mutex.
  */
 static int rfkill_toggle_radio(struct rfkill *rfkill,
 				enum rfkill_state state,
@@ -159,6 +170,9 @@ static int rfkill_toggle_radio(struct rfkill *rfkill,
 	int retval = 0;
 	enum rfkill_state oldstate, newstate;
 
+	if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
+		return -EBUSY;
+
 	oldstate = rfkill->state;
 
 	if (rfkill->get_state && !force &&
@@ -200,12 +214,12 @@ static int rfkill_toggle_radio(struct rfkill *rfkill,
 
 /**
  * rfkill_switch_all - Toggle state of all switches of given type
- * @type: type of interfaces to be affeceted
+ * @type: type of interfaces to be affected
  * @state: the new state
  *
- * This function toggles state of all switches of given type unless
- * a specific switch is claimed by userspace in which case it is
- * left alone.
+ * This function toggles the state of all switches of given type,
+ * unless a specific switch is claimed by userspace (in which case,
+ * that switch is left alone) or suspended.
  */
 void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
 {
@@ -216,8 +230,11 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
 	rfkill_states[type] = state;
 
 	list_for_each_entry(rfkill, &rfkill_list, node) {
-		if ((!rfkill->user_claim) && (rfkill->type == type))
+		if ((!rfkill->user_claim) && (rfkill->type == type)) {
+			mutex_lock(&rfkill->mutex);
 			rfkill_toggle_radio(rfkill, state, 0);
+			mutex_unlock(&rfkill->mutex);
+		}
 	}
 
 	mutex_unlock(&rfkill_mutex);
@@ -227,8 +244,8 @@ EXPORT_SYMBOL(rfkill_switch_all);
 /**
  * rfkill_epo - emergency power off all transmitters
  *
- * This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring
- * everything in its path but rfkill_mutex.
+ * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED,
+ * ignoring everything in its path but rfkill_mutex and rfkill->mutex.
  */
 void rfkill_epo(void)
 {
@@ -236,7 +253,9 @@ void rfkill_epo(void)
 
 	mutex_lock(&rfkill_mutex);
 	list_for_each_entry(rfkill, &rfkill_list, node) {
+		mutex_lock(&rfkill->mutex);
 		rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
+		mutex_unlock(&rfkill->mutex);
 	}
 	mutex_unlock(&rfkill_mutex);
 }
@@ -252,7 +271,12 @@ EXPORT_SYMBOL_GPL(rfkill_epo);
  * a notification by the firmware/hardware of the current *real*
  * state of the radio rfkill switch.
  *
- * It may not be called from an atomic context.
+ * Devices which are subject to external changes on their rfkill
+ * state (such as those caused by a hardware rfkill line) MUST
+ * have their driver arrange to call rfkill_force_state() as soon
+ * as possible after such a change.
+ *
+ * This function may not be called from an atomic context.
  */
 int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state)
 {
@@ -353,7 +377,7 @@ static ssize_t rfkill_claim_show(struct device *dev,
 {
 	struct rfkill *rfkill = to_rfkill(dev);
 
-	return sprintf(buf, "%d", rfkill->user_claim);
+	return sprintf(buf, "%d\n", rfkill->user_claim);
 }
 
 static ssize_t rfkill_claim_store(struct device *dev,
@@ -367,6 +391,9 @@ static ssize_t rfkill_claim_store(struct device *dev,
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
+	if (rfkill->user_claim_unsupported)
+		return -EOPNOTSUPP;
+
 	/*
 	 * Take the global lock to make sure the kernel is not in
 	 * the middle of rfkill_switch_all
@@ -375,19 +402,17 @@ static ssize_t rfkill_claim_store(struct device *dev,
 	if (error)
 		return error;
 
-	if (rfkill->user_claim_unsupported) {
-		error = -EOPNOTSUPP;
-		goto out_unlock;
-	}
 	if (rfkill->user_claim != claim) {
-		if (!claim)
+		if (!claim) {
+			mutex_lock(&rfkill->mutex);
 			rfkill_toggle_radio(rfkill,
 					    rfkill_states[rfkill->type],
 					    0);
+			mutex_unlock(&rfkill->mutex);
+		}
 		rfkill->user_claim = claim;
 	}
 
-out_unlock:
 	mutex_unlock(&rfkill_mutex);
 
 	return error ? error : count;
@@ -438,13 +463,14 @@ static int rfkill_resume(struct device *dev)
 	if (dev->power.power_state.event != PM_EVENT_ON) {
 		mutex_lock(&rfkill->mutex);
 
+		dev->power.power_state.event = PM_EVENT_ON;
+
 		/* restore radio state AND notify everybody */
 		rfkill_toggle_radio(rfkill, rfkill->state, 1);
 
 		mutex_unlock(&rfkill->mutex);
 	}
 
-	dev->power.power_state = PMSG_ON;
 	return 0;
 }
 #else
@@ -516,8 +542,11 @@ static void rfkill_remove_switch(struct rfkill *rfkill)
 {
 	mutex_lock(&rfkill_mutex);
 	list_del_init(&rfkill->node);
-	rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
 	mutex_unlock(&rfkill_mutex);
+
+	mutex_lock(&rfkill->mutex);
+	rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
+	mutex_unlock(&rfkill->mutex);
 }
 
 /**
@@ -526,9 +555,10 @@ static void rfkill_remove_switch(struct rfkill *rfkill)
  * @type: type of the switch (RFKILL_TYPE_*)
  *
  * This function should be called by the network driver when it needs
- * rfkill structure. Once the structure is allocated the driver shoud
- * finish its initialization by setting name, private data, enable_radio
+ * rfkill structure.  Once the structure is allocated the driver should
+ * finish its initialization by setting the name, private data, enable_radio
  * and disable_radio methods and then register it with rfkill_register().
+ *
  * NOTE: If registration fails the structure shoudl be freed by calling
  * rfkill_free() otherwise rfkill_unregister() should be used.
  */
@@ -560,7 +590,7 @@ EXPORT_SYMBOL(rfkill_allocate);
  * rfkill_free - Mark rfkill structure for deletion
  * @rfkill: rfkill structure to be destroyed
  *
- * Decrements reference count of rfkill structure so it is destroyed.
+ * Decrements reference count of the rfkill structure so it is destroyed.
  * Note that rfkill_free() should _not_ be called after rfkill_unregister().
  */
 void rfkill_free(struct rfkill *rfkill)
@@ -575,7 +605,10 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill)
 #ifdef CONFIG_RFKILL_LEDS
 	int error;
 
-	rfkill->led_trigger.name = rfkill->dev.bus_id;
+	if (!rfkill->led_trigger.name)
+		rfkill->led_trigger.name = rfkill->dev.bus_id;
+	if (!rfkill->led_trigger.activate)
+		rfkill->led_trigger.activate = rfkill_led_trigger_activate;
 	error = led_trigger_register(&rfkill->led_trigger);
 	if (error)
 		rfkill->led_trigger.name = NULL;
@@ -585,8 +618,10 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill)
 static void rfkill_led_trigger_unregister(struct rfkill *rfkill)
 {
 #ifdef CONFIG_RFKILL_LEDS
-	if (rfkill->led_trigger.name)
+	if (rfkill->led_trigger.name) {
 		led_trigger_unregister(&rfkill->led_trigger);
+		rfkill->led_trigger.name = NULL;
+	}
 #endif
 }
 
@@ -622,8 +657,8 @@ int rfkill_register(struct rfkill *rfkill)
 
 	error = device_add(dev);
 	if (error) {
-		rfkill_led_trigger_unregister(rfkill);
 		rfkill_remove_switch(rfkill);
+		rfkill_led_trigger_unregister(rfkill);
 		return error;
 	}
 
diff --git a/net/rxrpc/ar-accept.c b/net/rxrpc/ar-accept.c
index bdfb7741779..77228f28fa3 100644
--- a/net/rxrpc/ar-accept.c
+++ b/net/rxrpc/ar-accept.c
@@ -100,7 +100,7 @@ static int rxrpc_accept_incoming_call(struct rxrpc_local *local,
 
 	trans = rxrpc_get_transport(local, peer, GFP_NOIO);
 	rxrpc_put_peer(peer);
-	if (!trans) {
+	if (IS_ERR(trans)) {
 		_debug("no trans");
 		ret = -EBUSY;
 		goto error;
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index d308c19aa3f..9974b3f04f0 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -205,10 +205,9 @@ struct tcf_common *tcf_hash_check(u32 index, struct tc_action *a, int bind,
 {
 	struct tcf_common *p = NULL;
 	if (index && (p = tcf_hash_lookup(index, hinfo)) != NULL) {
-		if (bind) {
+		if (bind)
 			p->tcfc_bindcnt++;
-			p->tcfc_refcnt++;
-		}
+		p->tcfc_refcnt++;
 		a->priv = p;
 	}
 	return p;
@@ -752,7 +751,7 @@ static int tca_action_flush(struct nlattr *nla, struct nlmsghdr *n, u32 pid)
 	struct nlattr *tb[TCA_ACT_MAX+1];
 	struct nlattr *kind;
 	struct tc_action *a = create_a(0);
-	int err = -EINVAL;
+	int err = -ENOMEM;
 
 	if (a == NULL) {
 		printk("tca_action_flush: couldnt create tc_action\n");
@@ -763,7 +762,7 @@ static int tca_action_flush(struct nlattr *nla, struct nlmsghdr *n, u32 pid)
 	if (!skb) {
 		printk("tca_action_flush: failed skb alloc\n");
 		kfree(a);
-		return -ENOBUFS;
+		return err;
 	}
 
 	b = skb_tail_pointer(skb);
@@ -791,6 +790,8 @@ static int tca_action_flush(struct nlattr *nla, struct nlmsghdr *n, u32 pid)
 	err = a->ops->walk(skb, &dcb, RTM_DELACTION, a);
 	if (err < 0)
 		goto nla_put_failure;
+	if (err == 0)
+		goto noflush_out;
 
 	nla_nest_end(skb, nest);
 
@@ -808,6 +809,7 @@ nla_put_failure:
 nlmsg_failure:
 	module_put(a->ops->owner);
 err_out:
+noflush_out:
 	kfree_skb(skb);
 	kfree(a);
 	return err;
@@ -825,8 +827,10 @@ tca_action_gd(struct nlattr *nla, struct nlmsghdr *n, u32 pid, int event)
 		return ret;
 
 	if (event == RTM_DELACTION && n->nlmsg_flags&NLM_F_ROOT) {
-		if (tb[0] != NULL && tb[1] == NULL)
-			return tca_action_flush(tb[0], n, pid);
+		if (tb[1] != NULL)
+			return tca_action_flush(tb[1], n, pid);
+		else
+			return -EINVAL;
 	}
 
 	for (i = 1; i <= TCA_ACT_MAX_PRIO && tb[i]; i++) {
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index d2b6f54a626..8eb79e92e94 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -205,7 +205,7 @@ replay:
 		}
 	}
 
-	root_lock = qdisc_root_lock(q);
+	root_lock = qdisc_root_sleeping_lock(q);
 
 	if (tp == NULL) {
 		/* Proto-tcf does not exist, create new one */
@@ -280,7 +280,7 @@ replay:
 		if (n->nlmsg_type == RTM_DELTFILTER && t->tcm_handle == 0) {
 			spin_lock_bh(root_lock);
 			*back = tp->next;
-			spin_lock_bh(root_lock);
+			spin_unlock_bh(root_lock);
 
 			tfilter_notify(skb, n, tp, fh, RTM_DELTFILTER);
 			tcf_destroy(tp);
diff --git a/net/sched/cls_route.c b/net/sched/cls_route.c
index 481260a4f10..e3d8455eebc 100644
--- a/net/sched/cls_route.c
+++ b/net/sched/cls_route.c
@@ -75,7 +75,7 @@ static __inline__ int route4_fastmap_hash(u32 id, int iif)
 static inline
 void route4_reset_fastmap(struct Qdisc *q, struct route4_head *head, u32 id)
 {
-	spinlock_t *root_lock = qdisc_root_lock(q);
+	spinlock_t *root_lock = qdisc_root_sleeping_lock(q);
 
 	spin_lock_bh(root_lock);
 	memset(head->fastmap, 0, sizeof(head->fastmap));
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index b0601642e22..1122c952aa9 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -27,6 +27,7 @@
 #include <linux/kmod.h>
 #include <linux/list.h>
 #include <linux/hrtimer.h>
+#include <linux/lockdep.h>
 
 #include <net/net_namespace.h>
 #include <net/sock.h>
@@ -183,24 +184,68 @@ EXPORT_SYMBOL(unregister_qdisc);
    (root qdisc, all its children, children of children etc.)
  */
 
+struct Qdisc *qdisc_match_from_root(struct Qdisc *root, u32 handle)
+{
+	struct Qdisc *q;
+
+	if (!(root->flags & TCQ_F_BUILTIN) &&
+	    root->handle == handle)
+		return root;
+
+	list_for_each_entry(q, &root->list, list) {
+		if (q->handle == handle)
+			return q;
+	}
+	return NULL;
+}
+
+/*
+ * This lock is needed until some qdiscs stop calling qdisc_tree_decrease_qlen()
+ * without rtnl_lock(); currently hfsc_dequeue(), netem_dequeue(), tbf_dequeue()
+ */
+static DEFINE_SPINLOCK(qdisc_list_lock);
+
+static void qdisc_list_add(struct Qdisc *q)
+{
+	if ((q->parent != TC_H_ROOT) && !(q->flags & TCQ_F_INGRESS)) {
+		spin_lock_bh(&qdisc_list_lock);
+		list_add_tail(&q->list, &qdisc_root_sleeping(q)->list);
+		spin_unlock_bh(&qdisc_list_lock);
+	}
+}
+
+void qdisc_list_del(struct Qdisc *q)
+{
+	if ((q->parent != TC_H_ROOT) && !(q->flags & TCQ_F_INGRESS)) {
+		spin_lock_bh(&qdisc_list_lock);
+		list_del(&q->list);
+		spin_unlock_bh(&qdisc_list_lock);
+	}
+}
+EXPORT_SYMBOL(qdisc_list_del);
+
 struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle)
 {
 	unsigned int i;
+	struct Qdisc *q;
+
+	spin_lock_bh(&qdisc_list_lock);
 
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-		struct Qdisc *q, *txq_root = txq->qdisc;
-
-		if (!(txq_root->flags & TCQ_F_BUILTIN) &&
-		    txq_root->handle == handle)
-			return txq_root;
+		struct Qdisc *txq_root = txq->qdisc_sleeping;
 
-		list_for_each_entry(q, &txq_root->list, list) {
-			if (q->handle == handle)
-				return q;
-		}
+		q = qdisc_match_from_root(txq_root, handle);
+		if (q)
+			goto unlock;
 	}
-	return NULL;
+
+	q = qdisc_match_from_root(dev->rx_queue.qdisc_sleeping, handle);
+
+unlock:
+	spin_unlock_bh(&qdisc_list_lock);
+
+	return q;
 }
 
 static struct Qdisc *qdisc_leaf(struct Qdisc *p, u32 classid)
@@ -416,7 +461,7 @@ static enum hrtimer_restart qdisc_watchdog(struct hrtimer *timer)
 
 	wd->qdisc->flags &= ~TCQ_F_THROTTLED;
 	smp_wmb();
-	__netif_schedule(wd->qdisc);
+	__netif_schedule(qdisc_root(wd->qdisc));
 
 	return HRTIMER_NORESTART;
 }
@@ -433,6 +478,10 @@ void qdisc_watchdog_schedule(struct qdisc_watchdog *wd, psched_time_t expires)
 {
 	ktime_t time;
 
+	if (test_bit(__QDISC_STATE_DEACTIVATED,
+		     &qdisc_root_sleeping(wd->qdisc)->state))
+		return;
+
 	wd->qdisc->flags |= TCQ_F_THROTTLED;
 	time = ktime_set(0, 0);
 	time = ktime_add_ns(time, PSCHED_US2NS(expires));
@@ -572,44 +621,21 @@ static u32 qdisc_alloc_handle(struct net_device *dev)
 static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
 				     struct Qdisc *qdisc)
 {
+	struct Qdisc *oqdisc = dev_queue->qdisc_sleeping;
 	spinlock_t *root_lock;
-	struct Qdisc *oqdisc;
-	int ingress;
-
-	ingress = 0;
-	if (qdisc && qdisc->flags&TCQ_F_INGRESS)
-		ingress = 1;
 
-	if (ingress) {
-		oqdisc = dev_queue->qdisc;
-	} else {
-		oqdisc = dev_queue->qdisc_sleeping;
-	}
-
-	root_lock = qdisc_root_lock(oqdisc);
+	root_lock = qdisc_lock(oqdisc);
 	spin_lock_bh(root_lock);
 
-	if (ingress) {
-		/* Prune old scheduler */
-		if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) {
-			/* delete */
-			qdisc_reset(oqdisc);
-			dev_queue->qdisc = NULL;
-		} else {  /* new */
-			dev_queue->qdisc = qdisc;
-		}
+	/* Prune old scheduler */
+	if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
+		qdisc_reset(oqdisc);
 
-	} else {
-		/* Prune old scheduler */
-		if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
-			qdisc_reset(oqdisc);
-
-		/* ... and graft new one */
-		if (qdisc == NULL)
-			qdisc = &noop_qdisc;
-		dev_queue->qdisc_sleeping = qdisc;
-		dev_queue->qdisc = &noop_qdisc;
-	}
+	/* ... and graft new one */
+	if (qdisc == NULL)
+		qdisc = &noop_qdisc;
+	dev_queue->qdisc_sleeping = qdisc;
+	rcu_assign_pointer(dev_queue->qdisc, &noop_qdisc);
 
 	spin_unlock_bh(root_lock);
 
@@ -650,11 +676,8 @@ static void notify_and_destroy(struct sk_buff *skb, struct nlmsghdr *n, u32 clid
 	if (new || old)
 		qdisc_notify(skb, n, clid, old, new);
 
-	if (old) {
-		spin_lock_bh(&old->q.lock);
+	if (old)
 		qdisc_destroy(old);
-		spin_unlock_bh(&old->q.lock);
-	}
 }
 
 /* Graft qdisc "new" to class "classid" of qdisc "parent" or
@@ -678,7 +701,8 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 
 		ingress = 0;
 		num_q = dev->num_tx_queues;
-		if (q && q->flags & TCQ_F_INGRESS) {
+		if ((q && q->flags & TCQ_F_INGRESS) ||
+		    (new && new->flags & TCQ_F_INGRESS)) {
 			num_q = 1;
 			ingress = 1;
 		}
@@ -692,13 +716,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 			if (!ingress)
 				dev_queue = netdev_get_tx_queue(dev, i);
 
-			if (ingress) {
-				old = dev_graft_qdisc(dev_queue, q);
-			} else {
-				old = dev_graft_qdisc(dev_queue, new);
-				if (new && i > 0)
-					atomic_inc(&new->refcnt);
-			}
+			old = dev_graft_qdisc(dev_queue, new);
+			if (new && i > 0)
+				atomic_inc(&new->refcnt);
+
 			notify_and_destroy(skb, n, classid, old, new);
 		}
 
@@ -722,6 +743,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 	return err;
 }
 
+/* lockdep annotation is needed for ingress; egress gets it only for name */
+static struct lock_class_key qdisc_tx_lock;
+static struct lock_class_key qdisc_rx_lock;
+
 /*
    Allocate and initialize new qdisc.
 
@@ -782,6 +807,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 	if (handle == TC_H_INGRESS) {
 		sch->flags |= TCQ_F_INGRESS;
 		handle = TC_H_MAKE(TC_H_INGRESS, 0);
+		lockdep_set_class(qdisc_lock(sch), &qdisc_rx_lock);
 	} else {
 		if (handle == 0) {
 			handle = qdisc_alloc_handle(dev);
@@ -789,6 +815,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 			if (handle == 0)
 				goto err_out3;
 		}
+		lockdep_set_class(qdisc_lock(sch), &qdisc_tx_lock);
 	}
 
 	sch->handle = handle;
@@ -803,9 +830,16 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 			sch->stab = stab;
 		}
 		if (tca[TCA_RATE]) {
+			spinlock_t *root_lock;
+
+			if ((sch->parent != TC_H_ROOT) &&
+			    !(sch->flags & TCQ_F_INGRESS))
+				root_lock = qdisc_root_sleeping_lock(sch);
+			else
+				root_lock = qdisc_lock(sch);
+
 			err = gen_new_estimator(&sch->bstats, &sch->rate_est,
-						qdisc_root_lock(sch),
-						tca[TCA_RATE]);
+						root_lock, tca[TCA_RATE]);
 			if (err) {
 				/*
 				 * Any broken qdiscs that would require
@@ -817,8 +851,8 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 				goto err_out3;
 			}
 		}
-		if (parent)
-			list_add_tail(&sch->list, &dev_queue->qdisc->list);
+
+		qdisc_list_add(sch);
 
 		return sch;
 	}
@@ -857,7 +891,8 @@ static int qdisc_change(struct Qdisc *sch, struct nlattr **tca)
 
 	if (tca[TCA_RATE])
 		gen_replace_estimator(&sch->bstats, &sch->rate_est,
-				      qdisc_root_lock(sch), tca[TCA_RATE]);
+				      qdisc_root_sleeping_lock(sch),
+				      tca[TCA_RATE]);
 	return 0;
 }
 
@@ -933,7 +968,7 @@ static int tc_get_qdisc(struct sk_buff *skb, struct nlmsghdr *n, void *arg)
 					return -ENOENT;
 				q = qdisc_leaf(p, clid);
 			} else { /* ingress */
-				q = dev->rx_queue.qdisc;
+				q = dev->rx_queue.qdisc_sleeping;
 			}
 		} else {
 			struct netdev_queue *dev_queue;
@@ -1003,7 +1038,7 @@ replay:
 					return -ENOENT;
 				q = qdisc_leaf(p, clid);
 			} else { /*ingress */
-				q = dev->rx_queue.qdisc;
+				q = dev->rx_queue.qdisc_sleeping;
 			}
 		} else {
 			struct netdev_queue *dev_queue;
@@ -1099,20 +1134,13 @@ create_n_graft:
 	}
 
 graft:
-	if (1) {
-		spinlock_t *root_lock;
-
-		err = qdisc_graft(dev, p, skb, n, clid, q, NULL);
-		if (err) {
-			if (q) {
-				root_lock = qdisc_root_lock(q);
-				spin_lock_bh(root_lock);
-				qdisc_destroy(q);
-				spin_unlock_bh(root_lock);
-			}
-			return err;
-		}
+	err = qdisc_graft(dev, p, skb, n, clid, q, NULL);
+	if (err) {
+		if (q)
+			qdisc_destroy(q);
+		return err;
 	}
+
 	return 0;
 }
 
@@ -1141,8 +1169,8 @@ static int tc_fill_qdisc(struct sk_buff *skb, struct Qdisc *q, u32 clid,
 	if (q->stab && qdisc_dump_stab(skb, q->stab) < 0)
 		goto nla_put_failure;
 
-	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
-					 TCA_XSTATS, qdisc_root_lock(q), &d) < 0)
+	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS,
+					 qdisc_root_sleeping_lock(q), &d) < 0)
 		goto nla_put_failure;
 
 	if (q->ops->dump_stats && q->ops->dump_stats(q, &d) < 0)
@@ -1261,11 +1289,11 @@ static int tc_dump_qdisc(struct sk_buff *skb, struct netlink_callback *cb)
 		q_idx = 0;
 
 		dev_queue = netdev_get_tx_queue(dev, 0);
-		if (tc_dump_qdisc_root(dev_queue->qdisc, skb, cb, &q_idx, s_q_idx) < 0)
+		if (tc_dump_qdisc_root(dev_queue->qdisc_sleeping, skb, cb, &q_idx, s_q_idx) < 0)
 			goto done;
 
 		dev_queue = &dev->rx_queue;
-		if (tc_dump_qdisc_root(dev_queue->qdisc, skb, cb, &q_idx, s_q_idx) < 0)
+		if (tc_dump_qdisc_root(dev_queue->qdisc_sleeping, skb, cb, &q_idx, s_q_idx) < 0)
 			goto done;
 
 cont:
@@ -1433,8 +1461,8 @@ static int tc_fill_tclass(struct sk_buff *skb, struct Qdisc *q,
 	if (cl_ops->dump && cl_ops->dump(q, cl, skb, tcm) < 0)
 		goto nla_put_failure;
 
-	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
-					 TCA_XSTATS, qdisc_root_lock(q), &d) < 0)
+	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS,
+					 qdisc_root_sleeping_lock(q), &d) < 0)
 		goto nla_put_failure;
 
 	if (cl_ops->dump_stats && cl_ops->dump_stats(q, cl, &d) < 0)
@@ -1554,11 +1582,11 @@ static int tc_dump_tclass(struct sk_buff *skb, struct netlink_callback *cb)
 	t = 0;
 
 	dev_queue = netdev_get_tx_queue(dev, 0);
-	if (tc_dump_tclass_root(dev_queue->qdisc, skb, tcm, cb, &t, s_t) < 0)
+	if (tc_dump_tclass_root(dev_queue->qdisc_sleeping, skb, tcm, cb, &t, s_t) < 0)
 		goto done;
 
 	dev_queue = &dev->rx_queue;
-	if (tc_dump_tclass_root(dev_queue->qdisc, skb, tcm, cb, &t, s_t) < 0)
+	if (tc_dump_tclass_root(dev_queue->qdisc_sleeping, skb, tcm, cb, &t, s_t) < 0)
 		goto done;
 
 done:
diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c
index 6b517b9dac5..43d37256c15 100644
--- a/net/sched/sch_atm.c
+++ b/net/sched/sch_atm.c
@@ -415,7 +415,7 @@ static int atm_tc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		case TC_ACT_QUEUED:
 		case TC_ACT_STOLEN:
 			kfree_skb(skb);
-			return NET_XMIT_SUCCESS;
+			return NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			kfree_skb(skb);
 			goto drop;
@@ -432,9 +432,11 @@ static int atm_tc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	ret = qdisc_enqueue(skb, flow->q);
 	if (ret != 0) {
 drop: __maybe_unused
-		sch->qstats.drops++;
-		if (flow)
-			flow->qstats.drops++;
+		if (net_xmit_drop_count(ret)) {
+			sch->qstats.drops++;
+			if (flow)
+				flow->qstats.drops++;
+		}
 		return ret;
 	}
 	sch->bstats.bytes += qdisc_pkt_len(skb);
@@ -455,7 +457,7 @@ drop: __maybe_unused
 		return 0;
 	}
 	tasklet_schedule(&p->task);
-	return NET_XMIT_BYPASS;
+	return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 }
 
 /*
@@ -530,7 +532,7 @@ static int atm_tc_requeue(struct sk_buff *skb, struct Qdisc *sch)
 	if (!ret) {
 		sch->q.qlen++;
 		sch->qstats.requeues++;
-	} else {
+	} else if (net_xmit_drop_count(ret)) {
 		sch->qstats.drops++;
 		p->link.qstats.drops++;
 	}
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 14954bf4a68..8b06fa90048 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -230,7 +230,7 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
 	    (cl = cbq_class_lookup(q, prio)) != NULL)
 		return cl;
 
-	*qerr = NET_XMIT_BYPASS;
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	for (;;) {
 		int result = 0;
 		defmap = head->defaults;
@@ -256,7 +256,7 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
 		switch (result) {
 		case TC_ACT_QUEUED:
 		case TC_ACT_STOLEN:
-			*qerr = NET_XMIT_SUCCESS;
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			return NULL;
 		case TC_ACT_RECLASSIFY:
@@ -377,7 +377,7 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	q->rx_class = cl;
 #endif
 	if (cl == NULL) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
@@ -397,9 +397,11 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		return ret;
 	}
 
-	sch->qstats.drops++;
-	cbq_mark_toplevel(q, cl);
-	cl->qstats.drops++;
+	if (net_xmit_drop_count(ret)) {
+		sch->qstats.drops++;
+		cbq_mark_toplevel(q, cl);
+		cl->qstats.drops++;
+	}
 	return ret;
 }
 
@@ -430,8 +432,10 @@ cbq_requeue(struct sk_buff *skb, struct Qdisc *sch)
 			cbq_activate_class(cl);
 		return 0;
 	}
-	sch->qstats.drops++;
-	cl->qstats.drops++;
+	if (net_xmit_drop_count(ret)) {
+		sch->qstats.drops++;
+		cl->qstats.drops++;
+	}
 	return ret;
 }
 
@@ -517,6 +521,10 @@ static void cbq_ovl_delay(struct cbq_class *cl)
 	struct cbq_sched_data *q = qdisc_priv(cl->qdisc);
 	psched_tdiff_t delay = cl->undertime - q->now;
 
+	if (test_bit(__QDISC_STATE_DEACTIVATED,
+		     &qdisc_root_sleeping(cl->qdisc)->state))
+		return;
+
 	if (!cl->delayed) {
 		psched_time_t sched = q->now;
 		ktime_t expires;
@@ -650,7 +658,7 @@ static enum hrtimer_restart cbq_undelay(struct hrtimer *timer)
 	}
 
 	sch->flags &= ~TCQ_F_THROTTLED;
-	__netif_schedule(sch);
+	__netif_schedule(qdisc_root(sch));
 	return HRTIMER_NORESTART;
 }
 
@@ -664,13 +672,15 @@ static int cbq_reshape_fail(struct sk_buff *skb, struct Qdisc *child)
 	q->rx_class = NULL;
 
 	if (cl && (cl = cbq_reclassify(skb, cl)) != NULL) {
+		int ret;
 
 		cbq_mark_toplevel(q, cl);
 
 		q->rx_class = cl;
 		cl->q->__parent = sch;
 
-		if (qdisc_enqueue(skb, cl->q) == 0) {
+		ret = qdisc_enqueue(skb, cl->q);
+		if (ret == NET_XMIT_SUCCESS) {
 			sch->q.qlen++;
 			sch->bstats.packets++;
 			sch->bstats.bytes += qdisc_pkt_len(skb);
@@ -678,7 +688,8 @@ static int cbq_reshape_fail(struct sk_buff *skb, struct Qdisc *child)
 				cbq_activate_class(cl);
 			return 0;
 		}
-		sch->qstats.drops++;
+		if (net_xmit_drop_count(ret))
+			sch->qstats.drops++;
 		return 0;
 	}
 
@@ -1743,7 +1754,7 @@ static void cbq_put(struct Qdisc *sch, unsigned long arg)
 
 	if (--cl->refcnt == 0) {
 #ifdef CONFIG_NET_CLS_ACT
-		spinlock_t *root_lock = qdisc_root_lock(sch);
+		spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
 		struct cbq_sched_data *q = qdisc_priv(sch);
 
 		spin_lock_bh(root_lock);
@@ -1828,7 +1839,7 @@ cbq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **t
 
 		if (tca[TCA_RATE])
 			gen_replace_estimator(&cl->bstats, &cl->rate_est,
-					      qdisc_root_lock(sch),
+					      qdisc_root_sleeping_lock(sch),
 					      tca[TCA_RATE]);
 		return 0;
 	}
@@ -1919,7 +1930,7 @@ cbq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **t
 
 	if (tca[TCA_RATE])
 		gen_new_estimator(&cl->bstats, &cl->rate_est,
-				  qdisc_root_lock(sch), tca[TCA_RATE]);
+				  qdisc_root_sleeping_lock(sch), tca[TCA_RATE]);
 
 	*arg = (unsigned long)cl;
 	return 0;
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index a935676987e..edd1298f85f 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -236,7 +236,7 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		case TC_ACT_QUEUED:
 		case TC_ACT_STOLEN:
 			kfree_skb(skb);
-			return NET_XMIT_SUCCESS;
+			return NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 
 		case TC_ACT_SHOT:
 			goto drop;
@@ -254,7 +254,8 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 
 	err = qdisc_enqueue(skb, p->q);
 	if (err != NET_XMIT_SUCCESS) {
-		sch->qstats.drops++;
+		if (net_xmit_drop_count(err))
+			sch->qstats.drops++;
 		return err;
 	}
 
@@ -267,7 +268,7 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 drop:
 	kfree_skb(skb);
 	sch->qstats.drops++;
-	return NET_XMIT_BYPASS;
+	return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 }
 
 static struct sk_buff *dsmark_dequeue(struct Qdisc *sch)
@@ -321,7 +322,8 @@ static int dsmark_requeue(struct sk_buff *skb, struct Qdisc *sch)
 
 	err = p->q->ops->requeue(skb, p->q);
 	if (err != NET_XMIT_SUCCESS) {
-		sch->qstats.drops++;
+		if (net_xmit_drop_count(err))
+			sch->qstats.drops++;
 		return err;
 	}
 
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index fd2a6cadb11..ec0a0839ce5 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -29,7 +29,7 @@
 /* Main transmission queue. */
 
 /* Modifications to data participating in scheduling must be protected with
- * qdisc_root_lock(qdisc) spinlock.
+ * qdisc_lock(qdisc) spinlock.
  *
  * The idea is the following:
  * - enqueue, dequeue are serialized via qdisc root lock
@@ -126,7 +126,7 @@ static inline int qdisc_restart(struct Qdisc *q)
 	if (unlikely((skb = dequeue_skb(q)) == NULL))
 		return 0;
 
-	root_lock = qdisc_root_lock(q);
+	root_lock = qdisc_lock(q);
 
 	/* And release qdisc */
 	spin_unlock(root_lock);
@@ -135,7 +135,8 @@ static inline int qdisc_restart(struct Qdisc *q)
 	txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
 
 	HARD_TX_LOCK(dev, txq, smp_processor_id());
-	if (!netif_subqueue_stopped(dev, skb))
+	if (!netif_tx_queue_stopped(txq) &&
+	    !netif_tx_queue_frozen(txq))
 		ret = dev_hard_start_xmit(skb, dev, txq);
 	HARD_TX_UNLOCK(dev, txq);
 
@@ -162,7 +163,8 @@ static inline int qdisc_restart(struct Qdisc *q)
 		break;
 	}
 
-	if (ret && netif_tx_queue_stopped(txq))
+	if (ret && (netif_tx_queue_stopped(txq) ||
+		    netif_tx_queue_frozen(txq)))
 		ret = 0;
 
 	return ret;
@@ -213,10 +215,9 @@ static void dev_watchdog(unsigned long arg)
 			    time_after(jiffies, (dev->trans_start +
 						 dev->watchdog_timeo))) {
 				char drivername[64];
-				printk(KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
+				WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
 				       dev->name, netdev_drivername(dev, drivername, 64));
 				dev->tx_timeout(dev);
-				WARN_ON_ONCE(1);
 			}
 			if (!mod_timer(&dev->watchdog_timer,
 				       round_jiffies(jiffies +
@@ -505,7 +506,7 @@ errout:
 }
 EXPORT_SYMBOL(qdisc_create_dflt);
 
-/* Under qdisc_root_lock(qdisc) and BH! */
+/* Under qdisc_lock(qdisc) and BH! */
 
 void qdisc_reset(struct Qdisc *qdisc)
 {
@@ -516,15 +517,17 @@ void qdisc_reset(struct Qdisc *qdisc)
 }
 EXPORT_SYMBOL(qdisc_reset);
 
-/* this is the rcu callback function to clean up a qdisc when there
- * are no further references to it */
-
-static void __qdisc_destroy(struct rcu_head *head)
+void qdisc_destroy(struct Qdisc *qdisc)
 {
-	struct Qdisc *qdisc = container_of(head, struct Qdisc, q_rcu);
 	const struct Qdisc_ops  *ops = qdisc->ops;
 
+	if (qdisc->flags & TCQ_F_BUILTIN ||
+	    !atomic_dec_and_test(&qdisc->refcnt))
+		return;
+
 #ifdef CONFIG_NET_SCHED
+	qdisc_list_del(qdisc);
+
 	qdisc_put_stab(qdisc->stab);
 #endif
 	gen_kill_estimator(&qdisc->bstats, &qdisc->rate_est);
@@ -540,20 +543,6 @@ static void __qdisc_destroy(struct rcu_head *head)
 
 	kfree((char *) qdisc - qdisc->padded);
 }
-
-/* Under qdisc_root_lock(qdisc) and BH! */
-
-void qdisc_destroy(struct Qdisc *qdisc)
-{
-	if (qdisc->flags & TCQ_F_BUILTIN ||
-	    !atomic_dec_and_test(&qdisc->refcnt))
-		return;
-
-	if (qdisc->parent)
-		list_del(&qdisc->list);
-
-	call_rcu(&qdisc->q_rcu, __qdisc_destroy);
-}
 EXPORT_SYMBOL(qdisc_destroy);
 
 static bool dev_all_qdisc_sleeping_noop(struct net_device *dev)
@@ -595,8 +584,11 @@ static void transition_one_qdisc(struct net_device *dev,
 	struct Qdisc *new_qdisc = dev_queue->qdisc_sleeping;
 	int *need_watchdog_p = _need_watchdog;
 
+	if (!(new_qdisc->flags & TCQ_F_BUILTIN))
+		clear_bit(__QDISC_STATE_DEACTIVATED, &new_qdisc->state);
+
 	rcu_assign_pointer(dev_queue->qdisc, new_qdisc);
-	if (new_qdisc != &noqueue_qdisc)
+	if (need_watchdog_p && new_qdisc != &noqueue_qdisc)
 		*need_watchdog_p = 1;
 }
 
@@ -619,6 +611,7 @@ void dev_activate(struct net_device *dev)
 
 	need_watchdog = 0;
 	netdev_for_each_tx_queue(dev, transition_one_qdisc, &need_watchdog);
+	transition_one_qdisc(dev, &dev->rx_queue, NULL);
 
 	if (need_watchdog) {
 		dev->trans_start = jiffies;
@@ -637,14 +630,17 @@ static void dev_deactivate_queue(struct net_device *dev,
 	if (qdisc) {
 		spin_lock_bh(qdisc_lock(qdisc));
 
-		dev_queue->qdisc = qdisc_default;
+		if (!(qdisc->flags & TCQ_F_BUILTIN))
+			set_bit(__QDISC_STATE_DEACTIVATED, &qdisc->state);
+
+		rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
 		qdisc_reset(qdisc);
 
 		spin_unlock_bh(qdisc_lock(qdisc));
 	}
 }
 
-static bool some_qdisc_is_running(struct net_device *dev, int lock)
+static bool some_qdisc_is_busy(struct net_device *dev)
 {
 	unsigned int i;
 
@@ -655,16 +651,15 @@ static bool some_qdisc_is_running(struct net_device *dev, int lock)
 		int val;
 
 		dev_queue = netdev_get_tx_queue(dev, i);
-		q = dev_queue->qdisc;
-		root_lock = qdisc_root_lock(q);
+		q = dev_queue->qdisc_sleeping;
+		root_lock = qdisc_lock(q);
 
-		if (lock)
-			spin_lock_bh(root_lock);
+		spin_lock_bh(root_lock);
 
-		val = test_bit(__QDISC_STATE_RUNNING, &q->state);
+		val = (test_bit(__QDISC_STATE_RUNNING, &q->state) ||
+		       test_bit(__QDISC_STATE_SCHED, &q->state));
 
-		if (lock)
-			spin_unlock_bh(root_lock);
+		spin_unlock_bh(root_lock);
 
 		if (val)
 			return true;
@@ -674,9 +669,8 @@ static bool some_qdisc_is_running(struct net_device *dev, int lock)
 
 void dev_deactivate(struct net_device *dev)
 {
-	bool running;
-
 	netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc);
+	dev_deactivate_queue(dev, &dev->rx_queue, &noop_qdisc);
 
 	dev_watchdog_down(dev);
 
@@ -684,25 +678,8 @@ void dev_deactivate(struct net_device *dev)
 	synchronize_rcu();
 
 	/* Wait for outstanding qdisc_run calls. */
-	do {
-		while (some_qdisc_is_running(dev, 0))
-			yield();
-
-		/*
-		 * Double-check inside queue lock to ensure that all effects
-		 * of the queue run are visible when we return.
-		 */
-		running = some_qdisc_is_running(dev, 1);
-
-		/*
-		 * The running flag should never be set at this point because
-		 * we've already set dev->qdisc to noop_qdisc *inside* the same
-		 * pair of spin locks.  That is, if any qdisc_run starts after
-		 * our initial test it should see the noop_qdisc and then
-		 * clear the RUNNING bit before dropping the queue lock.  So
-		 * if it is set here then we've found a bug.
-		 */
-	} while (WARN_ON_ONCE(running));
+	while (some_qdisc_is_busy(dev))
+		yield();
 }
 
 static void dev_init_scheduler_queue(struct net_device *dev,
@@ -718,7 +695,7 @@ static void dev_init_scheduler_queue(struct net_device *dev,
 void dev_init_scheduler(struct net_device *dev)
 {
 	netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc);
-	dev_init_scheduler_queue(dev, &dev->rx_queue, NULL);
+	dev_init_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
 
 	setup_timer(&dev->watchdog_timer, dev_watchdog, (unsigned long)dev);
 }
@@ -731,20 +708,16 @@ static void shutdown_scheduler_queue(struct net_device *dev,
 	struct Qdisc *qdisc_default = _qdisc_default;
 
 	if (qdisc) {
-		spinlock_t *root_lock = qdisc_root_lock(qdisc);
-
-		dev_queue->qdisc = qdisc_default;
+		rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
 		dev_queue->qdisc_sleeping = qdisc_default;
 
-		spin_lock_bh(root_lock);
 		qdisc_destroy(qdisc);
-		spin_unlock_bh(root_lock);
 	}
 }
 
 void dev_shutdown(struct net_device *dev)
 {
 	netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc);
-	shutdown_scheduler_queue(dev, &dev->rx_queue, NULL);
+	shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
 	WARN_ON(timer_pending(&dev->watchdog_timer));
 }
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 0ae7d19dcba..c1e77da8cd0 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1045,7 +1045,7 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 
 		if (tca[TCA_RATE])
 			gen_replace_estimator(&cl->bstats, &cl->rate_est,
-					      qdisc_root_lock(sch),
+					      qdisc_root_sleeping_lock(sch),
 					      tca[TCA_RATE]);
 		return 0;
 	}
@@ -1104,7 +1104,7 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 
 	if (tca[TCA_RATE])
 		gen_new_estimator(&cl->bstats, &cl->rate_est,
-				  qdisc_root_lock(sch), tca[TCA_RATE]);
+				  qdisc_root_sleeping_lock(sch), tca[TCA_RATE]);
 	*arg = (unsigned long)cl;
 	return 0;
 }
@@ -1159,14 +1159,14 @@ hfsc_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
 		if (cl->level == 0)
 			return cl;
 
-	*qerr = NET_XMIT_BYPASS;
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	tcf = q->root.filter_list;
 	while (tcf && (result = tc_classify(skb, tcf, &res)) >= 0) {
 #ifdef CONFIG_NET_CLS_ACT
 		switch (result) {
 		case TC_ACT_QUEUED:
 		case TC_ACT_STOLEN:
-			*qerr = NET_XMIT_SUCCESS;
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			return NULL;
 		}
@@ -1578,7 +1578,7 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 
 	cl = hfsc_classify(skb, sch, &err);
 	if (cl == NULL) {
-		if (err == NET_XMIT_BYPASS)
+		if (err & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return err;
@@ -1586,8 +1586,10 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 
 	err = qdisc_enqueue(skb, cl->qdisc);
 	if (unlikely(err != NET_XMIT_SUCCESS)) {
-		cl->qstats.drops++;
-		sch->qstats.drops++;
+		if (net_xmit_drop_count(err)) {
+			cl->qstats.drops++;
+			sch->qstats.drops++;
+		}
 		return err;
 	}
 
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 75a40951c4f..d14f02056ae 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -214,14 +214,14 @@ static struct htb_class *htb_classify(struct sk_buff *skb, struct Qdisc *sch,
 	if ((cl = htb_find(skb->priority, sch)) != NULL && cl->level == 0)
 		return cl;
 
-	*qerr = NET_XMIT_BYPASS;
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	tcf = q->filter_list;
 	while (tcf && (result = tc_classify(skb, tcf, &res)) >= 0) {
 #ifdef CONFIG_NET_CLS_ACT
 		switch (result) {
 		case TC_ACT_QUEUED:
 		case TC_ACT_STOLEN:
-			*qerr = NET_XMIT_SUCCESS;
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			return NULL;
 		}
@@ -567,15 +567,17 @@ static int htb_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		}
 #ifdef CONFIG_NET_CLS_ACT
 	} else if (!cl) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
 #endif
-	} else if (qdisc_enqueue(skb, cl->un.leaf.q) != NET_XMIT_SUCCESS) {
-		sch->qstats.drops++;
-		cl->qstats.drops++;
-		return NET_XMIT_DROP;
+	} else if ((ret = qdisc_enqueue(skb, cl->un.leaf.q)) != NET_XMIT_SUCCESS) {
+		if (net_xmit_drop_count(ret)) {
+			sch->qstats.drops++;
+			cl->qstats.drops++;
+		}
+		return ret;
 	} else {
 		cl->bstats.packets +=
 			skb_is_gso(skb)?skb_shinfo(skb)->gso_segs:1;
@@ -610,16 +612,18 @@ static int htb_requeue(struct sk_buff *skb, struct Qdisc *sch)
 		}
 #ifdef CONFIG_NET_CLS_ACT
 	} else if (!cl) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
 #endif
-	} else if (cl->un.leaf.q->ops->requeue(skb, cl->un.leaf.q) !=
+	} else if ((ret = cl->un.leaf.q->ops->requeue(skb, cl->un.leaf.q)) !=
 		   NET_XMIT_SUCCESS) {
-		sch->qstats.drops++;
-		cl->qstats.drops++;
-		return NET_XMIT_DROP;
+		if (net_xmit_drop_count(ret)) {
+			sch->qstats.drops++;
+			cl->qstats.drops++;
+		}
+		return ret;
 	} else
 		htb_activate(q, cl);
 
@@ -1039,7 +1043,7 @@ static int htb_init(struct Qdisc *sch, struct nlattr *opt)
 
 static int htb_dump(struct Qdisc *sch, struct sk_buff *skb)
 {
-	spinlock_t *root_lock = qdisc_root_lock(sch);
+	spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
 	struct htb_sched *q = qdisc_priv(sch);
 	struct nlattr *nest;
 	struct tc_htb_glob gopt;
@@ -1071,7 +1075,7 @@ static int htb_dump_class(struct Qdisc *sch, unsigned long arg,
 			  struct sk_buff *skb, struct tcmsg *tcm)
 {
 	struct htb_class *cl = (struct htb_class *)arg;
-	spinlock_t *root_lock = qdisc_root_lock(sch);
+	spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
 	struct nlattr *nest;
 	struct tc_htb_opt opt;
 
@@ -1275,7 +1279,8 @@ static int htb_delete(struct Qdisc *sch, unsigned long arg)
 
 	/* delete from hash and active; remainder in destroy_class */
 	qdisc_class_hash_remove(&q->clhash, &cl->common);
-	cl->parent->children--;
+	if (cl->parent)
+		cl->parent->children--;
 
 	if (cl->prio_activity)
 		htb_deactivate(q, cl);
@@ -1367,7 +1372,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
 			goto failure;
 
 		gen_new_estimator(&cl->bstats, &cl->rate_est,
-				  qdisc_root_lock(sch),
+				  qdisc_root_sleeping_lock(sch),
 				  tca[TCA_RATE] ? : &est.nla);
 		cl->refcnt = 1;
 		cl->children = 0;
@@ -1422,7 +1427,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
 	} else {
 		if (tca[TCA_RATE])
 			gen_replace_estimator(&cl->bstats, &cl->rate_est,
-					      qdisc_root_lock(sch),
+					      qdisc_root_sleeping_lock(sch),
 					      tca[TCA_RATE]);
 		sch_tree_lock(sch);
 	}
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index a5908570067..3781e55046d 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -176,7 +176,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	if (count == 0) {
 		sch->qstats.drops++;
 		kfree_skb(skb);
-		return NET_XMIT_BYPASS;
+		return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	}
 
 	skb_orphan(skb);
@@ -240,8 +240,9 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		sch->q.qlen++;
 		sch->bstats.bytes += qdisc_pkt_len(skb);
 		sch->bstats.packets++;
-	} else
+	} else if (net_xmit_drop_count(ret)) {
 		sch->qstats.drops++;
+	}
 
 	pr_debug("netem: enqueue ret %d\n", ret);
 	return ret;
@@ -340,7 +341,7 @@ static int get_dist_table(struct Qdisc *sch, const struct nlattr *attr)
 	for (i = 0; i < n; i++)
 		d->table[i] = data[i];
 
-	root_lock = qdisc_root_lock(sch);
+	root_lock = qdisc_root_sleeping_lock(sch);
 
 	spin_lock_bh(root_lock);
 	d = xchg(&q->delay_dist, d);
diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index f849243eb09..a6697c686c7 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -38,14 +38,14 @@ prio_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
 	struct tcf_result res;
 	int err;
 
-	*qerr = NET_XMIT_BYPASS;
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	if (TC_H_MAJ(skb->priority) != sch->handle) {
 		err = tc_classify(skb, q->filter_list, &res);
 #ifdef CONFIG_NET_CLS_ACT
 		switch (err) {
 		case TC_ACT_STOLEN:
 		case TC_ACT_QUEUED:
-			*qerr = NET_XMIT_SUCCESS;
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			return NULL;
 		}
@@ -74,7 +74,7 @@ prio_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 #ifdef CONFIG_NET_CLS_ACT
 	if (qdisc == NULL) {
 
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
@@ -88,7 +88,8 @@ prio_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 		sch->q.qlen++;
 		return NET_XMIT_SUCCESS;
 	}
-	sch->qstats.drops++;
+	if (net_xmit_drop_count(ret))
+		sch->qstats.drops++;
 	return ret;
 }
 
@@ -102,7 +103,7 @@ prio_requeue(struct sk_buff *skb, struct Qdisc* sch)
 	qdisc = prio_classify(skb, sch, &ret);
 #ifdef CONFIG_NET_CLS_ACT
 	if (qdisc == NULL) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
@@ -112,10 +113,11 @@ prio_requeue(struct sk_buff *skb, struct Qdisc* sch)
 	if ((ret = qdisc->ops->requeue(skb, qdisc)) == NET_XMIT_SUCCESS) {
 		sch->q.qlen++;
 		sch->qstats.requeues++;
-		return 0;
+		return NET_XMIT_SUCCESS;
 	}
-	sch->qstats.drops++;
-	return NET_XMIT_DROP;
+	if (net_xmit_drop_count(ret))
+		sch->qstats.drops++;
+	return ret;
 }
 
 
diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index 3f2d1d7f3bb..5da05839e22 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -97,7 +97,7 @@ static int red_enqueue(struct sk_buff *skb, struct Qdisc* sch)
 		sch->bstats.bytes += qdisc_pkt_len(skb);
 		sch->bstats.packets++;
 		sch->q.qlen++;
-	} else {
+	} else if (net_xmit_drop_count(ret)) {
 		q->stats.pdrop++;
 		sch->qstats.drops++;
 	}
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index 8589da66656..6e041d10dbd 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -171,14 +171,14 @@ static unsigned int sfq_classify(struct sk_buff *skb, struct Qdisc *sch,
 	if (!q->filter_list)
 		return sfq_hash(q, skb) + 1;
 
-	*qerr = NET_XMIT_BYPASS;
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 	result = tc_classify(skb, q->filter_list, &res);
 	if (result >= 0) {
 #ifdef CONFIG_NET_CLS_ACT
 		switch (result) {
 		case TC_ACT_STOLEN:
 		case TC_ACT_QUEUED:
-			*qerr = NET_XMIT_SUCCESS;
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
 		case TC_ACT_SHOT:
 			return 0;
 		}
@@ -285,7 +285,7 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 
 	hash = sfq_classify(skb, sch, &ret);
 	if (hash == 0) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
@@ -339,7 +339,7 @@ sfq_requeue(struct sk_buff *skb, struct Qdisc *sch)
 
 	hash = sfq_classify(skb, sch, &ret);
 	if (hash == 0) {
-		if (ret == NET_XMIT_BYPASS)
+		if (ret & __NET_XMIT_BYPASS)
 			sch->qstats.drops++;
 		kfree_skb(skb);
 		return ret;
diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c
index b296672f763..94c61598b86 100644
--- a/net/sched/sch_tbf.c
+++ b/net/sched/sch_tbf.c
@@ -123,19 +123,13 @@ static int tbf_enqueue(struct sk_buff *skb, struct Qdisc* sch)
 	struct tbf_sched_data *q = qdisc_priv(sch);
 	int ret;
 
-	if (qdisc_pkt_len(skb) > q->max_size) {
-		sch->qstats.drops++;
-#ifdef CONFIG_NET_CLS_ACT
-		if (sch->reshape_fail == NULL || sch->reshape_fail(skb, sch))
-#endif
-			kfree_skb(skb);
-
-		return NET_XMIT_DROP;
-	}
+	if (qdisc_pkt_len(skb) > q->max_size)
+		return qdisc_reshape_fail(skb, sch);
 
 	ret = qdisc_enqueue(skb, q->qdisc);
 	if (ret != 0) {
-		sch->qstats.drops++;
+		if (net_xmit_drop_count(ret))
+			sch->qstats.drops++;
 		return ret;
 	}
 
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 537223642b6..d35ef059abb 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -161,7 +161,7 @@ teql_destroy(struct Qdisc* sch)
 						txq = netdev_get_tx_queue(master->dev, 0);
 						master->slaves = NULL;
 
-						root_lock = qdisc_root_lock(txq->qdisc);
+						root_lock = qdisc_root_sleeping_lock(txq->qdisc);
 						spin_lock_bh(root_lock);
 						qdisc_reset(txq->qdisc);
 						spin_unlock_bh(root_lock);
@@ -305,10 +305,11 @@ restart:
 
 		switch (teql_resolve(skb, skb_res, slave)) {
 		case 0:
-			if (netif_tx_trylock(slave)) {
-				if (!__netif_subqueue_stopped(slave, subq) &&
+			if (__netif_tx_trylock(slave_txq)) {
+				if (!netif_tx_queue_stopped(slave_txq) &&
+				    !netif_tx_queue_frozen(slave_txq) &&
 				    slave->hard_start_xmit(skb, slave) == 0) {
-					netif_tx_unlock(slave);
+					__netif_tx_unlock(slave_txq);
 					master->slaves = NEXT_SLAVE(q);
 					netif_wake_queue(dev);
 					master->stats.tx_packets++;
@@ -316,7 +317,7 @@ restart:
 						qdisc_pkt_len(skb);
 					return 0;
 				}
-				netif_tx_unlock(slave);
+				__netif_tx_unlock(slave_txq);
 			}
 			if (netif_queue_stopped(dev))
 				busy = 1;
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 8472b8b349c..abd51cef241 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -599,11 +599,12 @@ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc,
 	/* Check to see if this is a duplicate. */
 	peer = sctp_assoc_lookup_paddr(asoc, addr);
 	if (peer) {
+		/* An UNKNOWN state is only set on transports added by
+		 * user in sctp_connectx() call.  Such transports should be
+		 * considered CONFIRMED per RFC 4960, Section 5.4.
+		 */
 		if (peer->state == SCTP_UNKNOWN) {
-			if (peer_state == SCTP_ACTIVE)
-				peer->state = SCTP_ACTIVE;
-			if (peer_state == SCTP_UNCONFIRMED)
-				peer->state = SCTP_UNCONFIRMED;
+			peer->state = SCTP_ACTIVE;
 		}
 		return peer;
 	}
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 675a5c3e68a..52db5f60daa 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -80,6 +80,10 @@ static struct sctp_auth_bytes *sctp_auth_create_key(__u32 key_len, gfp_t gfp)
 {
 	struct sctp_auth_bytes *key;
 
+	/* Verify that we are not going to overflow INT_MAX */
+	if ((INT_MAX - key_len) < sizeof(struct sctp_auth_bytes))
+		return NULL;
+
 	/* Allocate the shared key */
 	key = kmalloc(sizeof(struct sctp_auth_bytes) + key_len, gfp);
 	if (!key)
@@ -782,6 +786,9 @@ int sctp_auth_ep_set_hmacs(struct sctp_endpoint *ep,
 	for (i = 0; i < hmacs->shmac_num_idents; i++) {
 		id = hmacs->shmac_idents[i];
 
+		if (id > SCTP_AUTH_HMAC_ID_MAX)
+			return -EOPNOTSUPP;
+
 		if (SCTP_AUTH_HMAC_ID_SHA1 == id)
 			has_sha1 = 1;
 
diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index e39a0cdef18..4c8d9f45ce0 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -103,6 +103,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
 
 		/* Initialize the CHUNKS parameter */
 		auth_chunks->param_hdr.type = SCTP_PARAM_CHUNKS;
+		auth_chunks->param_hdr.length = htons(sizeof(sctp_paramhdr_t));
 
 		/* If the Add-IP functionality is enabled, we must
 		 * authenticate, ASCONF and ASCONF-ACK chunks
@@ -110,8 +111,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
 		if (sctp_addip_enable) {
 			auth_chunks->chunks[0] = SCTP_CID_ASCONF;
 			auth_chunks->chunks[1] = SCTP_CID_ASCONF_ACK;
-			auth_chunks->param_hdr.length =
-					htons(sizeof(sctp_paramhdr_t) + 2);
+			auth_chunks->param_hdr.length += htons(2);
 		}
 	}
 
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index a238d6834b3..47f91afa021 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -195,8 +195,7 @@ out:
 }
 
 /* Based on tcp_v6_xmit() in tcp_ipv6.c. */
-static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport,
-			int ipfragok)
+static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport)
 {
 	struct sock *sk = skb->sk;
 	struct ipv6_pinfo *np = inet6_sk(sk);
@@ -231,7 +230,10 @@ static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport,
 
 	SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS);
 
-	return ip6_xmit(sk, skb, &fl, np->opt, ipfragok);
+	if (!(transport->param_flags & SPP_PMTUD_ENABLE))
+		skb->local_df = 1;
+
+	return ip6_xmit(sk, skb, &fl, np->opt, 0);
 }
 
 /* Returns the dst cache entry for the given source and destination ip
@@ -317,7 +319,8 @@ static void sctp_v6_get_saddr(struct sctp_sock *sk,
 			  __func__, asoc, dst, NIP6(daddr->v6.sin6_addr));
 
 	if (!asoc) {
-		ipv6_dev_get_saddr(dst ? ip6_dst_idev(dst)->dev : NULL,
+		ipv6_dev_get_saddr(sock_net(sctp_opt2sk(sk)),
+				   dst ? ip6_dst_idev(dst)->dev : NULL,
 				   &daddr->v6.sin6_addr,
 				   inet6_sk(&sk->inet.sk)->srcprefs,
 				   &saddr->v6.sin6_addr);
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 45684646b1d..225c7123c41 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -533,7 +533,8 @@ int sctp_packet_transmit(struct sctp_packet *packet)
 	if (!(dst->dev->features & NETIF_F_NO_CSUM)) {
 		crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len);
 		crc32 = sctp_end_cksum(crc32);
-	}
+	} else
+		nskb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	/* 3) Put the resultant value into the checksum field in the
 	 *    common header, and leave the rest of the bits unchanged.
@@ -586,10 +587,8 @@ int sctp_packet_transmit(struct sctp_packet *packet)
 	SCTP_DEBUG_PRINTK("***sctp_transmit_packet*** skb len %d\n",
 			  nskb->len);
 
-	if (tp->param_flags & SPP_PMTUD_ENABLE)
-		(*tp->af_specific->sctp_xmit)(nskb, tp, packet->ipfragok);
-	else
-		(*tp->af_specific->sctp_xmit)(nskb, tp, 1);
+	nskb->local_df = packet->ipfragok;
+	(*tp->af_specific->sctp_xmit)(nskb, tp);
 
 out:
 	packet->size = packet->overhead;
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index a6e0818bcff..0b65354aaf6 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -862,16 +862,21 @@ static int sctp_inet_supported_addrs(const struct sctp_sock *opt,
 
 /* Wrapper routine that calls the ip transmit routine. */
 static inline int sctp_v4_xmit(struct sk_buff *skb,
-			       struct sctp_transport *transport, int ipfragok)
+			       struct sctp_transport *transport)
 {
+	struct inet_sock *inet = inet_sk(skb->sk);
+
 	SCTP_DEBUG_PRINTK("%s: skb:%p, len:%d, "
 			  "src:%u.%u.%u.%u, dst:%u.%u.%u.%u\n",
 			  __func__, skb, skb->len,
 			  NIPQUAD(skb->rtable->rt_src),
 			  NIPQUAD(skb->rtable->rt_dst));
 
+	inet->pmtudisc = transport->param_flags & SPP_PMTUD_ENABLE ?
+			 IP_PMTUDISC_DO : IP_PMTUDISC_DONT;
+
 	SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS);
-	return ip_queue_xmit(skb, ipfragok);
+	return ip_queue_xmit(skb, 0);
 }
 
 static struct sctp_af sctp_af_inet;
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index e8ca4e54981..b599cbba4fb 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1886,11 +1886,13 @@ static void sctp_process_ext_param(struct sctp_association *asoc,
 			    /* if the peer reports AUTH, assume that he
 			     * supports AUTH.
 			     */
-			    asoc->peer.auth_capable = 1;
+			    if (sctp_auth_enable)
+				    asoc->peer.auth_capable = 1;
 			    break;
 		    case SCTP_CID_ASCONF:
 		    case SCTP_CID_ASCONF_ACK:
-			    asoc->peer.asconf_capable = 1;
+			    if (sctp_addip_enable)
+				    asoc->peer.asconf_capable = 1;
 			    break;
 		    default:
 			    break;
@@ -2319,12 +2321,10 @@ clean_up:
 	/* Release the transport structures. */
 	list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) {
 		transport = list_entry(pos, struct sctp_transport, transports);
-		list_del_init(pos);
-		sctp_transport_free(transport);
+		if (transport->state != SCTP_ACTIVE)
+			sctp_assoc_rm_peer(asoc, transport);
 	}
 
-	asoc->peer.transport_count = 0;
-
 nomem:
 	return 0;
 }
@@ -2460,6 +2460,9 @@ do_addr_param:
 		break;
 
 	case SCTP_PARAM_SET_PRIMARY:
+		if (!sctp_addip_enable)
+			goto fall_through;
+
 		addr_param = param.v + sizeof(sctp_addip_param_t);
 
 		af = sctp_get_af_specific(param_type2af(param.p->type));
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index dbb79adf8f3..5ffb9dec1c3 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3055,6 +3055,9 @@ static int sctp_setsockopt_auth_chunk(struct sock *sk,
 {
 	struct sctp_authchunk val;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen != sizeof(struct sctp_authchunk))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, optlen))
@@ -3083,8 +3086,12 @@ static int sctp_setsockopt_hmac_ident(struct sock *sk,
 				    int optlen)
 {
 	struct sctp_hmacalgo *hmacs;
+	u32 idents;
 	int err;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen < sizeof(struct sctp_hmacalgo))
 		return -EINVAL;
 
@@ -3097,8 +3104,9 @@ static int sctp_setsockopt_hmac_ident(struct sock *sk,
 		goto out;
 	}
 
-	if (hmacs->shmac_num_idents == 0 ||
-	    hmacs->shmac_num_idents > SCTP_AUTH_NUM_HMACS) {
+	idents = hmacs->shmac_num_idents;
+	if (idents == 0 || idents > SCTP_AUTH_NUM_HMACS ||
+	    (idents * sizeof(u16)) > (optlen - sizeof(struct sctp_hmacalgo))) {
 		err = -EINVAL;
 		goto out;
 	}
@@ -3123,6 +3131,9 @@ static int sctp_setsockopt_auth_key(struct sock *sk,
 	struct sctp_association *asoc;
 	int ret;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen <= sizeof(struct sctp_authkey))
 		return -EINVAL;
 
@@ -3135,6 +3146,11 @@ static int sctp_setsockopt_auth_key(struct sock *sk,
 		goto out;
 	}
 
+	if (authkey->sca_keylength > optlen - sizeof(struct sctp_authkey)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	asoc = sctp_id2assoc(sk, authkey->sca_assoc_id);
 	if (!asoc && authkey->sca_assoc_id && sctp_style(sk, UDP)) {
 		ret = -EINVAL;
@@ -3160,6 +3176,9 @@ static int sctp_setsockopt_active_key(struct sock *sk,
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen != sizeof(struct sctp_authkeyid))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, optlen))
@@ -3185,6 +3204,9 @@ static int sctp_setsockopt_del_key(struct sock *sk,
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen != sizeof(struct sctp_authkeyid))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, optlen))
@@ -5197,19 +5219,29 @@ static int sctp_getsockopt_maxburst(struct sock *sk, int len,
 static int sctp_getsockopt_hmac_ident(struct sock *sk, int len,
 				    char __user *optval, int __user *optlen)
 {
+	struct sctp_hmacalgo  __user *p = (void __user *)optval;
 	struct sctp_hmac_algo_param *hmacs;
-	__u16 param_len;
+	__u16 data_len = 0;
+	u32 num_idents;
+
+	if (!sctp_auth_enable)
+		return -EACCES;
 
 	hmacs = sctp_sk(sk)->ep->auth_hmacs_list;
-	param_len = ntohs(hmacs->param_hdr.length);
+	data_len = ntohs(hmacs->param_hdr.length) - sizeof(sctp_paramhdr_t);
 
-	if (len < param_len)
+	if (len < sizeof(struct sctp_hmacalgo) + data_len)
 		return -EINVAL;
+
+	len = sizeof(struct sctp_hmacalgo) + data_len;
+	num_idents = data_len / sizeof(u16);
+
 	if (put_user(len, optlen))
 		return -EFAULT;
-	if (copy_to_user(optval, hmacs->hmac_ids, len))
+	if (put_user(num_idents, &p->shmac_num_idents))
+		return -EFAULT;
+	if (copy_to_user(p->shmac_idents, hmacs->hmac_ids, data_len))
 		return -EFAULT;
-
 	return 0;
 }
 
@@ -5219,6 +5251,9 @@ static int sctp_getsockopt_active_key(struct sock *sk, int len,
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (len < sizeof(struct sctp_authkeyid))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, sizeof(struct sctp_authkeyid)))
@@ -5233,6 +5268,12 @@ static int sctp_getsockopt_active_key(struct sock *sk, int len,
 	else
 		val.scact_keynumber = sctp_sk(sk)->ep->active_key_id;
 
+	len = sizeof(struct sctp_authkeyid);
+	if (put_user(len, optlen))
+		return -EFAULT;
+	if (copy_to_user(optval, &val, len))
+		return -EFAULT;
+
 	return 0;
 }
 
@@ -5243,13 +5284,16 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len,
 	struct sctp_authchunks val;
 	struct sctp_association *asoc;
 	struct sctp_chunks_param *ch;
-	u32    num_chunks;
+	u32    num_chunks = 0;
 	char __user *to;
 
-	if (len <= sizeof(struct sctp_authchunks))
+	if (!sctp_auth_enable)
+		return -EACCES;
+
+	if (len < sizeof(struct sctp_authchunks))
 		return -EINVAL;
 
-	if (copy_from_user(&val, p, sizeof(struct sctp_authchunks)))
+	if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks)))
 		return -EFAULT;
 
 	to = p->gauth_chunks;
@@ -5258,20 +5302,21 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len,
 		return -EINVAL;
 
 	ch = asoc->peer.peer_chunks;
+	if (!ch)
+		goto num;
 
 	/* See if the user provided enough room for all the data */
 	num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
 	if (len < num_chunks)
 		return -EINVAL;
 
-	len = num_chunks;
-	if (put_user(len, optlen))
+	if (copy_to_user(to, ch->chunks, num_chunks))
 		return -EFAULT;
+num:
+	len = sizeof(struct sctp_authchunks) + num_chunks;
+	if (put_user(len, optlen)) return -EFAULT;
 	if (put_user(num_chunks, &p->gauth_number_of_chunks))
 		return -EFAULT;
-	if (copy_to_user(to, ch->chunks, len))
-		return -EFAULT;
-
 	return 0;
 }
 
@@ -5282,13 +5327,16 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len,
 	struct sctp_authchunks val;
 	struct sctp_association *asoc;
 	struct sctp_chunks_param *ch;
-	u32    num_chunks;
+	u32    num_chunks = 0;
 	char __user *to;
 
-	if (len <= sizeof(struct sctp_authchunks))
+	if (!sctp_auth_enable)
+		return -EACCES;
+
+	if (len < sizeof(struct sctp_authchunks))
 		return -EINVAL;
 
-	if (copy_from_user(&val, p, sizeof(struct sctp_authchunks)))
+	if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks)))
 		return -EFAULT;
 
 	to = p->gauth_chunks;
@@ -5301,17 +5349,21 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len,
 	else
 		ch = sctp_sk(sk)->ep->auth_chunk_list;
 
+	if (!ch)
+		goto num;
+
 	num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
-	if (len < num_chunks)
+	if (len < sizeof(struct sctp_authchunks) + num_chunks)
 		return -EINVAL;
 
-	len = num_chunks;
+	if (copy_to_user(to, ch->chunks, num_chunks))
+		return -EFAULT;
+num:
+	len = sizeof(struct sctp_authchunks) + num_chunks;
 	if (put_user(len, optlen))
 		return -EFAULT;
 	if (put_user(num_chunks, &p->gauth_number_of_chunks))
 		return -EFAULT;
-	if (copy_to_user(to, ch->chunks, len))
-		return -EFAULT;
 
 	return 0;
 }
diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c
index 0f8c439b848..5231f7aaac0 100644
--- a/net/sunrpc/sysctl.c
+++ b/net/sunrpc/sysctl.c
@@ -60,24 +60,14 @@ static int proc_do_xprt(ctl_table *table, int write, struct file *file,
 			void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	char tmpbuf[256];
-	int len;
+	size_t len;
+
 	if ((*ppos && !write) || !*lenp) {
 		*lenp = 0;
 		return 0;
 	}
-	if (write)
-		return -EINVAL;
-	else {
-		len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
-		if (!access_ok(VERIFY_WRITE, buffer, len))
-			return -EFAULT;
-
-		if (__copy_to_user(buffer, tmpbuf, len))
-			return -EFAULT;
-	}
-	*lenp -= len;
-	*ppos += len;
-	return 0;
+	len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
+	return simple_read_from_buffer(buffer, *lenp, ppos, tmpbuf, len);
 }
 
 static int
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index b4b17f44cb2..74de31a0661 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -443,18 +443,18 @@ int svc_rdma_recvfrom(struct svc_rqst *rqstp)
 
 	dprintk("svcrdma: rqstp=%p\n", rqstp);
 
-	spin_lock_bh(&rdma_xprt->sc_read_complete_lock);
+	spin_lock_bh(&rdma_xprt->sc_rq_dto_lock);
 	if (!list_empty(&rdma_xprt->sc_read_complete_q)) {
 		ctxt = list_entry(rdma_xprt->sc_read_complete_q.next,
 				  struct svc_rdma_op_ctxt,
 				  dto_q);
 		list_del_init(&ctxt->dto_q);
 	}
-	spin_unlock_bh(&rdma_xprt->sc_read_complete_lock);
-	if (ctxt)
+	if (ctxt) {
+		spin_unlock_bh(&rdma_xprt->sc_rq_dto_lock);
 		return rdma_read_complete(rqstp, ctxt);
+	}
 
-	spin_lock_bh(&rdma_xprt->sc_rq_dto_lock);
 	if (!list_empty(&rdma_xprt->sc_rq_dto_q)) {
 		ctxt = list_entry(rdma_xprt->sc_rq_dto_q.next,
 				  struct svc_rdma_op_ctxt,
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 19ddc382b77..900cb69728c 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -359,11 +359,11 @@ static void sq_cq_reap(struct svcxprt_rdma *xprt)
 			if (test_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags)) {
 				struct svc_rdma_op_ctxt *read_hdr = ctxt->read_hdr;
 				BUG_ON(!read_hdr);
+				spin_lock_bh(&xprt->sc_rq_dto_lock);
 				set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
-				spin_lock_bh(&xprt->sc_read_complete_lock);
 				list_add_tail(&read_hdr->dto_q,
 					      &xprt->sc_read_complete_q);
-				spin_unlock_bh(&xprt->sc_read_complete_lock);
+				spin_unlock_bh(&xprt->sc_rq_dto_lock);
 				svc_xprt_enqueue(&xprt->sc_xprt);
 			}
 			svc_rdma_put_context(ctxt, 0);
@@ -428,7 +428,6 @@ static struct svcxprt_rdma *rdma_create_xprt(struct svc_serv *serv,
 	init_waitqueue_head(&cma_xprt->sc_send_wait);
 
 	spin_lock_init(&cma_xprt->sc_lock);
-	spin_lock_init(&cma_xprt->sc_read_complete_lock);
 	spin_lock_init(&cma_xprt->sc_rq_dto_lock);
 
 	cma_xprt->sc_ord = svcrdma_ord;
diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c
index b1ff16aa4bd..3ddaff42d1b 100644
--- a/net/tipc/bcast.c
+++ b/net/tipc/bcast.c
@@ -96,8 +96,8 @@ struct bcbearer {
 	struct media media;
 	struct bcbearer_pair bpairs[MAX_BEARERS];
 	struct bcbearer_pair bpairs_temp[TIPC_MAX_LINK_PRI + 1];
-	struct node_map remains;
-	struct node_map remains_new;
+	struct tipc_node_map remains;
+	struct tipc_node_map remains_new;
 };
 
 /**
@@ -110,7 +110,7 @@ struct bcbearer {
 
 struct bclink {
 	struct link link;
-	struct node node;
+	struct tipc_node node;
 };
 
 
@@ -149,7 +149,7 @@ static void bcbuf_decr_acks(struct sk_buff *buf)
  * Called with 'node' locked, bc_lock unlocked
  */
 
-static void bclink_set_gap(struct node *n_ptr)
+static void bclink_set_gap(struct tipc_node *n_ptr)
 {
 	struct sk_buff *buf = n_ptr->bclink.deferred_head;
 
@@ -202,7 +202,7 @@ static void bclink_retransmit_pkt(u32 after, u32 to)
  * Node is locked, bc_lock unlocked.
  */
 
-void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked)
+void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked)
 {
 	struct sk_buff *crs;
 	struct sk_buff *next;
@@ -250,7 +250,7 @@ void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked)
  * tipc_net_lock and node lock set
  */
 
-static void bclink_send_ack(struct node *n_ptr)
+static void bclink_send_ack(struct tipc_node *n_ptr)
 {
 	struct link *l_ptr = n_ptr->active_links[n_ptr->addr & 1];
 
@@ -264,7 +264,7 @@ static void bclink_send_ack(struct node *n_ptr)
  * tipc_net_lock and node lock set
  */
 
-static void bclink_send_nack(struct node *n_ptr)
+static void bclink_send_nack(struct tipc_node *n_ptr)
 {
 	struct sk_buff *buf;
 	struct tipc_msg *msg;
@@ -308,7 +308,7 @@ static void bclink_send_nack(struct node *n_ptr)
  * tipc_net_lock and node lock set
  */
 
-void tipc_bclink_check_gap(struct node *n_ptr, u32 last_sent)
+void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 last_sent)
 {
 	if (!n_ptr->bclink.supported ||
 	    less_eq(last_sent, mod(n_ptr->bclink.last_in)))
@@ -328,7 +328,7 @@ void tipc_bclink_check_gap(struct node *n_ptr, u32 last_sent)
 
 static void tipc_bclink_peek_nack(u32 dest, u32 sender_tag, u32 gap_after, u32 gap_to)
 {
-	struct node *n_ptr = tipc_node_find(dest);
+	struct tipc_node *n_ptr = tipc_node_find(dest);
 	u32 my_after, my_to;
 
 	if (unlikely(!n_ptr || !tipc_node_is_up(n_ptr)))
@@ -418,7 +418,7 @@ void tipc_bclink_recv_pkt(struct sk_buff *buf)
 	static int rx_count = 0;
 #endif
 	struct tipc_msg *msg = buf_msg(buf);
-	struct node* node = tipc_node_find(msg_prevnode(msg));
+	struct tipc_node* node = tipc_node_find(msg_prevnode(msg));
 	u32 next_in;
 	u32 seqno;
 	struct sk_buff *deferred;
@@ -538,7 +538,7 @@ u32 tipc_bclink_get_last_sent(void)
 	return last_sent;
 }
 
-u32 tipc_bclink_acks_missing(struct node *n_ptr)
+u32 tipc_bclink_acks_missing(struct tipc_node *n_ptr)
 {
 	return (n_ptr->bclink.supported &&
 		(tipc_bclink_get_last_sent() != n_ptr->bclink.acked));
diff --git a/net/tipc/bcast.h b/net/tipc/bcast.h
index a2416fa6b90..5aa024b99c5 100644
--- a/net/tipc/bcast.h
+++ b/net/tipc/bcast.h
@@ -41,12 +41,12 @@
 #define WSIZE 32
 
 /**
- * struct node_map - set of node identifiers
+ * struct tipc_node_map - set of node identifiers
  * @count: # of nodes in set
  * @map: bitmap of node identifiers that are in the set
  */
 
-struct node_map {
+struct tipc_node_map {
 	u32 count;
 	u32 map[MAX_NODES / WSIZE];
 };
@@ -68,7 +68,7 @@ struct port_list {
 };
 
 
-struct node;
+struct tipc_node;
 
 extern char tipc_bclink_name[];
 
@@ -77,7 +77,7 @@ extern char tipc_bclink_name[];
  * nmap_add - add a node to a node map
  */
 
-static inline void tipc_nmap_add(struct node_map *nm_ptr, u32 node)
+static inline void tipc_nmap_add(struct tipc_node_map *nm_ptr, u32 node)
 {
 	int n = tipc_node(node);
 	int w = n / WSIZE;
@@ -93,7 +93,7 @@ static inline void tipc_nmap_add(struct node_map *nm_ptr, u32 node)
  * nmap_remove - remove a node from a node map
  */
 
-static inline void tipc_nmap_remove(struct node_map *nm_ptr, u32 node)
+static inline void tipc_nmap_remove(struct tipc_node_map *nm_ptr, u32 node)
 {
 	int n = tipc_node(node);
 	int w = n / WSIZE;
@@ -109,7 +109,7 @@ static inline void tipc_nmap_remove(struct node_map *nm_ptr, u32 node)
  * nmap_equal - test for equality of node maps
  */
 
-static inline int tipc_nmap_equal(struct node_map *nm_a, struct node_map *nm_b)
+static inline int tipc_nmap_equal(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b)
 {
 	return !memcmp(nm_a, nm_b, sizeof(*nm_a));
 }
@@ -121,8 +121,8 @@ static inline int tipc_nmap_equal(struct node_map *nm_a, struct node_map *nm_b)
  * @nm_diff: output node map A-B (i.e. nodes of A that are not in B)
  */
 
-static inline void tipc_nmap_diff(struct node_map *nm_a, struct node_map *nm_b,
-				  struct node_map *nm_diff)
+static inline void tipc_nmap_diff(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b,
+				  struct tipc_node_map *nm_diff)
 {
 	int stop = sizeof(nm_a->map) / sizeof(u32);
 	int w;
@@ -195,12 +195,12 @@ static inline void tipc_port_list_free(struct port_list *pl_ptr)
 
 int  tipc_bclink_init(void);
 void tipc_bclink_stop(void);
-void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked);
+void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked);
 int  tipc_bclink_send_msg(struct sk_buff *buf);
 void tipc_bclink_recv_pkt(struct sk_buff *buf);
 u32  tipc_bclink_get_last_sent(void);
-u32  tipc_bclink_acks_missing(struct node *n_ptr);
-void tipc_bclink_check_gap(struct node *n_ptr, u32 seqno);
+u32  tipc_bclink_acks_missing(struct tipc_node *n_ptr);
+void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 seqno);
 int  tipc_bclink_stats(char *stats_buf, const u32 buf_size);
 int  tipc_bclink_reset_stats(void);
 int  tipc_bclink_set_queue_limits(u32 limit);
diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 6a9aba3edd0..a7a36779b9b 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -599,7 +599,7 @@ int tipc_block_bearer(const char *name)
 	spin_lock_bh(&b_ptr->publ.lock);
 	b_ptr->publ.blocked = 1;
 	list_for_each_entry_safe(l_ptr, temp_l_ptr, &b_ptr->links, link_list) {
-		struct node *n_ptr = l_ptr->owner;
+		struct tipc_node *n_ptr = l_ptr->owner;
 
 		spin_lock_bh(&n_ptr->lock);
 		tipc_link_reset(l_ptr);
diff --git a/net/tipc/bearer.h b/net/tipc/bearer.h
index 6a36b6600e6..ca573489271 100644
--- a/net/tipc/bearer.h
+++ b/net/tipc/bearer.h
@@ -104,7 +104,7 @@ struct bearer {
 	u32 continue_count;
 	int active;
 	char net_plane;
-	struct node_map nodes;
+	struct tipc_node_map nodes;
 };
 
 struct bearer_name {
diff --git a/net/tipc/cluster.c b/net/tipc/cluster.c
index 46ee6c58532..689fdefe9d0 100644
--- a/net/tipc/cluster.c
+++ b/net/tipc/cluster.c
@@ -48,8 +48,8 @@ static void tipc_cltr_multicast(struct cluster *c_ptr, struct sk_buff *buf,
 				u32 lower, u32 upper);
 static struct sk_buff *tipc_cltr_prepare_routing_msg(u32 data_size, u32 dest);
 
-struct node **tipc_local_nodes = NULL;
-struct node_map tipc_cltr_bcast_nodes = {0,{0,}};
+struct tipc_node **tipc_local_nodes = NULL;
+struct tipc_node_map tipc_cltr_bcast_nodes = {0,{0,}};
 u32 tipc_highest_allowed_slave = 0;
 
 struct cluster *tipc_cltr_create(u32 addr)
@@ -115,7 +115,7 @@ void tipc_cltr_delete(struct cluster *c_ptr)
 
 u32 tipc_cltr_next_node(struct cluster *c_ptr, u32 addr)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 n_num = tipc_node(addr) + 1;
 
 	if (!c_ptr)
@@ -133,7 +133,7 @@ u32 tipc_cltr_next_node(struct cluster *c_ptr, u32 addr)
 	return 0;
 }
 
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr)
+void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr)
 {
 	u32 n_num = tipc_node(n_ptr->addr);
 	u32 max_n_num = tipc_max_nodes;
@@ -196,7 +196,7 @@ u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref)
  * Uses deterministic and fair algorithm.
  */
 
-struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
+struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
 {
 	u32 n_num;
 	u32 mask = tipc_max_nodes;
@@ -379,7 +379,7 @@ void tipc_cltr_recv_routing_table(struct sk_buff *buf)
 {
 	struct tipc_msg *msg = buf_msg(buf);
 	struct cluster *c_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	unchar *node_table;
 	u32 table_size;
 	u32 router;
@@ -499,7 +499,7 @@ static void tipc_cltr_multicast(struct cluster *c_ptr, struct sk_buff *buf,
 			 u32 lower, u32 upper)
 {
 	struct sk_buff *buf_copy;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 n_num;
 	u32 tstop;
 
@@ -534,7 +534,7 @@ void tipc_cltr_broadcast(struct sk_buff *buf)
 {
 	struct sk_buff *buf_copy;
 	struct cluster *c_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 n_num;
 	u32 tstart;
 	u32 tstop;
diff --git a/net/tipc/cluster.h b/net/tipc/cluster.h
index 62df074afae..333efb0b9c4 100644
--- a/net/tipc/cluster.h
+++ b/net/tipc/cluster.h
@@ -54,24 +54,24 @@
 struct cluster {
 	u32 addr;
 	struct _zone *owner;
-	struct node **nodes;
+	struct tipc_node **nodes;
 	u32 highest_node;
 	u32 highest_slave;
 };
 
 
-extern struct node **tipc_local_nodes;
+extern struct tipc_node **tipc_local_nodes;
 extern u32 tipc_highest_allowed_slave;
-extern struct node_map tipc_cltr_bcast_nodes;
+extern struct tipc_node_map tipc_cltr_bcast_nodes;
 
 void tipc_cltr_remove_as_router(struct cluster *c_ptr, u32 router);
 void tipc_cltr_send_ext_routes(struct cluster *c_ptr, u32 dest);
-struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
+struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
 u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref);
 void tipc_cltr_recv_routing_table(struct sk_buff *buf);
 struct cluster *tipc_cltr_create(u32 addr);
 void tipc_cltr_delete(struct cluster *c_ptr);
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr);
+void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr);
 void tipc_cltr_send_slave_routes(struct cluster *c_ptr, u32 dest);
 void tipc_cltr_broadcast(struct sk_buff *buf);
 int tipc_cltr_init(void);
diff --git a/net/tipc/discover.c b/net/tipc/discover.c
index 1657f0e795f..74b7d1e28ae 100644
--- a/net/tipc/discover.c
+++ b/net/tipc/discover.c
@@ -193,7 +193,7 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct bearer *b_ptr)
 		/* Always accept link here */
 		struct sk_buff *rbuf;
 		struct tipc_media_addr *addr;
-		struct node *n_ptr = tipc_node_find(orig);
+		struct tipc_node *n_ptr = tipc_node_find(orig);
 		int link_fully_up;
 
 		dbg(" in own cluster\n");
diff --git a/net/tipc/link.c b/net/tipc/link.c
index d60113ba4b1..dd4c18b9a35 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -1155,7 +1155,7 @@ int tipc_link_send_buf(struct link *l_ptr, struct sk_buff *buf)
 int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector)
 {
 	struct link *l_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	int res = -ELINKCONG;
 
 	read_lock_bh(&tipc_net_lock);
@@ -1226,7 +1226,7 @@ static int link_send_buf_fast(struct link *l_ptr, struct sk_buff *buf,
 int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode)
 {
 	struct link *l_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	int res;
 	u32 selector = msg_origport(buf_msg(buf)) & 1;
 	u32 dummy;
@@ -1270,7 +1270,7 @@ int tipc_link_send_sections_fast(struct port *sender,
 	struct tipc_msg *hdr = &sender->publ.phdr;
 	struct link *l_ptr;
 	struct sk_buff *buf;
-	struct node *node;
+	struct tipc_node *node;
 	int res;
 	u32 selector = msg_origport(hdr) & 1;
 
@@ -1364,7 +1364,7 @@ static int link_send_sections_long(struct port *sender,
 				   u32 destaddr)
 {
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 	struct tipc_msg *hdr = &sender->publ.phdr;
 	u32 dsz = msg_data_sz(hdr);
 	u32 max_pkt,fragm_sz,rest;
@@ -1636,7 +1636,7 @@ void tipc_link_push_queue(struct link *l_ptr)
 
 static void link_reset_all(unsigned long addr)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	char addr_string[16];
 	u32 i;
 
@@ -1682,7 +1682,7 @@ static void link_retransmit_failure(struct link *l_ptr, struct sk_buff *buf)
 
 		/* Handle failure on broadcast link */
 
-		struct node *n_ptr;
+		struct tipc_node *n_ptr;
 		char addr_string[16];
 
 		tipc_printf(TIPC_OUTPUT, "Msg seq number: %u,  ", msg_seqno(msg));
@@ -1843,7 +1843,7 @@ void tipc_recv_msg(struct sk_buff *head, struct tipc_bearer *tb_ptr)
 	read_lock_bh(&tipc_net_lock);
 	while (head) {
 		struct bearer *b_ptr = (struct bearer *)tb_ptr;
-		struct node *n_ptr;
+		struct tipc_node *n_ptr;
 		struct link *l_ptr;
 		struct sk_buff *crs;
 		struct sk_buff *buf = head;
@@ -2935,7 +2935,7 @@ void tipc_link_set_queue_limits(struct link *l_ptr, u32 window)
  * Returns pointer to link (or 0 if invalid link name).
  */
 
-static struct link *link_find_link(const char *name, struct node **node)
+static struct link *link_find_link(const char *name, struct tipc_node **node)
 {
 	struct link_name link_name_parts;
 	struct bearer *b_ptr;
@@ -2965,7 +2965,7 @@ struct sk_buff *tipc_link_cmd_config(const void *req_tlv_area, int req_tlv_space
 	struct tipc_link_config *args;
 	u32 new_value;
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 	int res;
 
 	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_CONFIG))
@@ -3043,7 +3043,7 @@ struct sk_buff *tipc_link_cmd_reset_stats(const void *req_tlv_area, int req_tlv_
 {
 	char *link_name;
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 
 	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_NAME))
 		return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
@@ -3091,7 +3091,7 @@ static int tipc_link_stats(const char *name, char *buf, const u32 buf_size)
 {
 	struct print_buf pb;
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 	char *status;
 	u32 profile_total = 0;
 
@@ -3207,7 +3207,7 @@ int link_control(const char *name, u32 op, u32 val)
 	int res = -EINVAL;
 	struct link *l_ptr;
 	u32 bearer_id;
-	struct node * node;
+	struct tipc_node * node;
 	u32 a;
 
 	a = link_name2addr(name, &bearer_id);
@@ -3249,7 +3249,7 @@ int link_control(const char *name, u32 op, u32 val)
 
 u32 tipc_link_get_max_pkt(u32 dest, u32 selector)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	struct link *l_ptr;
 	u32 res = MAX_PKT_DEFAULT;
 
diff --git a/net/tipc/link.h b/net/tipc/link.h
index 52f3e7c1871..6a51e38ad25 100644
--- a/net/tipc/link.h
+++ b/net/tipc/link.h
@@ -116,7 +116,7 @@ struct link {
 	char name[TIPC_MAX_LINK_NAME];
 	struct tipc_media_addr media_addr;
 	struct timer_list timer;
-	struct node *owner;
+	struct tipc_node *owner;
 	struct list_head link_list;
 
 	/* Management and link supervision data */
diff --git a/net/tipc/name_table.h b/net/tipc/name_table.h
index b9e7cd336d7..139882d4ed0 100644
--- a/net/tipc/name_table.h
+++ b/net/tipc/name_table.h
@@ -76,7 +76,7 @@ struct publication {
 	u32 node;
 	u32 ref;
 	u32 key;
-	struct node_subscr subscr;
+	struct tipc_node_subscr subscr;
 	struct list_head local_list;
 	struct list_head pport_list;
 	struct publication *node_list_next;
diff --git a/net/tipc/net.c b/net/tipc/net.c
index ec7b04fbdc4..7906608bf51 100644
--- a/net/tipc/net.c
+++ b/net/tipc/net.c
@@ -118,7 +118,7 @@
 DEFINE_RWLOCK(tipc_net_lock);
 struct network tipc_net = { NULL };
 
-struct node *tipc_net_select_remote_node(u32 addr, u32 ref)
+struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref)
 {
 	return tipc_zone_select_remote_node(tipc_net.zones[tipc_zone(addr)], addr, ref);
 }
diff --git a/net/tipc/net.h b/net/tipc/net.h
index d154ac2bda9..de2b9ad8f64 100644
--- a/net/tipc/net.h
+++ b/net/tipc/net.h
@@ -55,7 +55,7 @@ extern rwlock_t tipc_net_lock;
 void tipc_net_remove_as_router(u32 router);
 void tipc_net_send_external_routes(u32 dest);
 void tipc_net_route_msg(struct sk_buff *buf);
-struct node *tipc_net_select_remote_node(u32 addr, u32 ref);
+struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref);
 u32 tipc_net_select_router(u32 addr, u32 ref);
 
 int tipc_net_start(u32 addr);
diff --git a/net/tipc/node.c b/net/tipc/node.c
index ee952ad6021..20d98c56e15 100644
--- a/net/tipc/node.c
+++ b/net/tipc/node.c
@@ -46,11 +46,11 @@
 #include "bearer.h"
 #include "name_distr.h"
 
-void node_print(struct print_buf *buf, struct node *n_ptr, char *str);
-static void node_lost_contact(struct node *n_ptr);
-static void node_established_contact(struct node *n_ptr);
+void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str);
+static void node_lost_contact(struct tipc_node *n_ptr);
+static void node_established_contact(struct tipc_node *n_ptr);
 
-struct node *tipc_nodes = NULL;	/* sorted list of nodes within cluster */
+struct tipc_node *tipc_nodes = NULL;	/* sorted list of nodes within cluster */
 
 static DEFINE_SPINLOCK(node_create_lock);
 
@@ -66,11 +66,11 @@ u32 tipc_own_tag = 0;
  * but this is a non-trivial change.)
  */
 
-struct node *tipc_node_create(u32 addr)
+struct tipc_node *tipc_node_create(u32 addr)
 {
 	struct cluster *c_ptr;
-	struct node *n_ptr;
-	struct node **curr_node;
+	struct tipc_node *n_ptr;
+	struct tipc_node **curr_node;
 
 	spin_lock_bh(&node_create_lock);
 
@@ -120,7 +120,7 @@ struct node *tipc_node_create(u32 addr)
 	return n_ptr;
 }
 
-void tipc_node_delete(struct node *n_ptr)
+void tipc_node_delete(struct tipc_node *n_ptr)
 {
 	if (!n_ptr)
 		return;
@@ -146,7 +146,7 @@ void tipc_node_delete(struct node *n_ptr)
  * Link becomes active (alone or shared) or standby, depending on its priority.
  */
 
-void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr)
 {
 	struct link **active = &n_ptr->active_links[0];
 
@@ -180,7 +180,7 @@ void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr)
  * node_select_active_links - select active link
  */
 
-static void node_select_active_links(struct node *n_ptr)
+static void node_select_active_links(struct tipc_node *n_ptr)
 {
 	struct link **active = &n_ptr->active_links[0];
 	u32 i;
@@ -208,7 +208,7 @@ static void node_select_active_links(struct node *n_ptr)
  * tipc_node_link_down - handle loss of link
  */
 
-void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr)
 {
 	struct link **active;
 
@@ -235,30 +235,30 @@ void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr)
 		node_lost_contact(n_ptr);
 }
 
-int tipc_node_has_active_links(struct node *n_ptr)
+int tipc_node_has_active_links(struct tipc_node *n_ptr)
 {
 	return (n_ptr &&
 		((n_ptr->active_links[0]) || (n_ptr->active_links[1])));
 }
 
-int tipc_node_has_redundant_links(struct node *n_ptr)
+int tipc_node_has_redundant_links(struct tipc_node *n_ptr)
 {
 	return (n_ptr->working_links > 1);
 }
 
-static int tipc_node_has_active_routes(struct node *n_ptr)
+static int tipc_node_has_active_routes(struct tipc_node *n_ptr)
 {
 	return (n_ptr && (n_ptr->last_router >= 0));
 }
 
-int tipc_node_is_up(struct node *n_ptr)
+int tipc_node_is_up(struct tipc_node *n_ptr)
 {
 	return (tipc_node_has_active_links(n_ptr) || tipc_node_has_active_routes(n_ptr));
 }
 
-struct node *tipc_node_attach_link(struct link *l_ptr)
+struct tipc_node *tipc_node_attach_link(struct link *l_ptr)
 {
-	struct node *n_ptr = tipc_node_find(l_ptr->addr);
+	struct tipc_node *n_ptr = tipc_node_find(l_ptr->addr);
 
 	if (!n_ptr)
 		n_ptr = tipc_node_create(l_ptr->addr);
@@ -285,7 +285,7 @@ struct node *tipc_node_attach_link(struct link *l_ptr)
 	return NULL;
 }
 
-void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr)
 {
 	n_ptr->links[l_ptr->b_ptr->identity] = NULL;
 	tipc_net.zones[tipc_zone(l_ptr->addr)]->links--;
@@ -338,7 +338,7 @@ void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr)
  *
  */
 
-static void node_established_contact(struct node *n_ptr)
+static void node_established_contact(struct tipc_node *n_ptr)
 {
 	struct cluster *c_ptr;
 
@@ -384,10 +384,10 @@ static void node_established_contact(struct node *n_ptr)
 				  tipc_highest_allowed_slave);
 }
 
-static void node_lost_contact(struct node *n_ptr)
+static void node_lost_contact(struct tipc_node *n_ptr)
 {
 	struct cluster *c_ptr;
-	struct node_subscr *ns, *tns;
+	struct tipc_node_subscr *ns, *tns;
 	char addr_string[16];
 	u32 i;
 
@@ -466,9 +466,9 @@ static void node_lost_contact(struct node *n_ptr)
  * Called by when cluster local lookup has failed.
  */
 
-struct node *tipc_node_select_next_hop(u32 addr, u32 selector)
+struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 router_addr;
 
 	if (!tipc_addr_domain_valid(addr))
@@ -513,7 +513,7 @@ struct node *tipc_node_select_next_hop(u32 addr, u32 selector)
  * Uses a deterministic and fair algorithm for selecting router node.
  */
 
-u32 tipc_node_select_router(struct node *n_ptr, u32 ref)
+u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref)
 {
 	u32 ulim;
 	u32 mask;
@@ -551,7 +551,7 @@ u32 tipc_node_select_router(struct node *n_ptr, u32 ref)
 	return tipc_addr(own_zone(), own_cluster(), r);
 }
 
-void tipc_node_add_router(struct node *n_ptr, u32 router)
+void tipc_node_add_router(struct tipc_node *n_ptr, u32 router)
 {
 	u32 r_num = tipc_node(router);
 
@@ -562,7 +562,7 @@ void tipc_node_add_router(struct node *n_ptr, u32 router)
 	       !n_ptr->routers[n_ptr->last_router]);
 }
 
-void tipc_node_remove_router(struct node *n_ptr, u32 router)
+void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router)
 {
 	u32 r_num = tipc_node(router);
 
@@ -580,7 +580,7 @@ void tipc_node_remove_router(struct node *n_ptr, u32 router)
 }
 
 #if 0
-void node_print(struct print_buf *buf, struct node *n_ptr, char *str)
+void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str)
 {
 	u32 i;
 
@@ -597,7 +597,7 @@ void node_print(struct print_buf *buf, struct node *n_ptr, char *str)
 
 u32 tipc_available_nodes(const u32 domain)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 cnt = 0;
 
 	read_lock_bh(&tipc_net_lock);
@@ -615,7 +615,7 @@ struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space)
 {
 	u32 domain;
 	struct sk_buff *buf;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	struct tipc_node_info node_info;
 	u32 payload_size;
 
@@ -667,7 +667,7 @@ struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space)
 {
 	u32 domain;
 	struct sk_buff *buf;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	struct tipc_link_info link_info;
 	u32 payload_size;
 
diff --git a/net/tipc/node.h b/net/tipc/node.h
index cd1882654bb..6f990da5d14 100644
--- a/net/tipc/node.h
+++ b/net/tipc/node.h
@@ -43,7 +43,7 @@
 #include "bearer.h"
 
 /**
- * struct node - TIPC node structure
+ * struct tipc_node - TIPC node structure
  * @addr: network address of node
  * @lock: spinlock governing access to structure
  * @owner: pointer to cluster that node belongs to
@@ -68,11 +68,11 @@
  *    @defragm: list of partially reassembled b'cast message fragments from node
  */
 
-struct node {
+struct tipc_node {
 	u32 addr;
 	spinlock_t lock;
 	struct cluster *owner;
-	struct node *next;
+	struct tipc_node *next;
 	struct list_head nsub;
 	struct link *active_links[2];
 	struct link *links[MAX_BEARERS];
@@ -94,26 +94,26 @@ struct node {
 	} bclink;
 };
 
-extern struct node *tipc_nodes;
+extern struct tipc_node *tipc_nodes;
 extern u32 tipc_own_tag;
 
-struct node *tipc_node_create(u32 addr);
-void tipc_node_delete(struct node *n_ptr);
-struct node *tipc_node_attach_link(struct link *l_ptr);
-void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr);
-void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr);
-void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr);
-int tipc_node_has_active_links(struct node *n_ptr);
-int tipc_node_has_redundant_links(struct node *n_ptr);
-u32 tipc_node_select_router(struct node *n_ptr, u32 ref);
-struct node *tipc_node_select_next_hop(u32 addr, u32 selector);
-int tipc_node_is_up(struct node *n_ptr);
-void tipc_node_add_router(struct node *n_ptr, u32 router);
-void tipc_node_remove_router(struct node *n_ptr, u32 router);
+struct tipc_node *tipc_node_create(u32 addr);
+void tipc_node_delete(struct tipc_node *n_ptr);
+struct tipc_node *tipc_node_attach_link(struct link *l_ptr);
+void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr);
+void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr);
+void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr);
+int tipc_node_has_active_links(struct tipc_node *n_ptr);
+int tipc_node_has_redundant_links(struct tipc_node *n_ptr);
+u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref);
+struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector);
+int tipc_node_is_up(struct tipc_node *n_ptr);
+void tipc_node_add_router(struct tipc_node *n_ptr, u32 router);
+void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router);
 struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space);
 struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space);
 
-static inline struct node *tipc_node_find(u32 addr)
+static inline struct tipc_node *tipc_node_find(u32 addr)
 {
 	if (likely(in_own_cluster(addr)))
 		return tipc_local_nodes[tipc_node(addr)];
@@ -126,19 +126,19 @@ static inline struct node *tipc_node_find(u32 addr)
 	return NULL;
 }
 
-static inline struct node *tipc_node_select(u32 addr, u32 selector)
+static inline struct tipc_node *tipc_node_select(u32 addr, u32 selector)
 {
 	if (likely(in_own_cluster(addr)))
 		return tipc_local_nodes[tipc_node(addr)];
 	return tipc_node_select_next_hop(addr, selector);
 }
 
-static inline void tipc_node_lock(struct node *n_ptr)
+static inline void tipc_node_lock(struct tipc_node *n_ptr)
 {
 	spin_lock_bh(&n_ptr->lock);
 }
 
-static inline void tipc_node_unlock(struct node *n_ptr)
+static inline void tipc_node_unlock(struct tipc_node *n_ptr)
 {
 	spin_unlock_bh(&n_ptr->lock);
 }
diff --git a/net/tipc/node_subscr.c b/net/tipc/node_subscr.c
index 8ecbd0fb610..19194d476a9 100644
--- a/net/tipc/node_subscr.c
+++ b/net/tipc/node_subscr.c
@@ -44,7 +44,7 @@
  * tipc_nodesub_subscribe - create "node down" subscription for specified node
  */
 
-void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
+void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr,
 		       void *usr_handle, net_ev_handler handle_down)
 {
 	if (addr == tipc_own_addr) {
@@ -69,7 +69,7 @@ void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
  * tipc_nodesub_unsubscribe - cancel "node down" subscription (if any)
  */
 
-void tipc_nodesub_unsubscribe(struct node_subscr *node_sub)
+void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub)
 {
 	if (!node_sub->node)
 		return;
diff --git a/net/tipc/node_subscr.h b/net/tipc/node_subscr.h
index 5f3f5859b84..006ed739f51 100644
--- a/net/tipc/node_subscr.h
+++ b/net/tipc/node_subscr.h
@@ -42,22 +42,22 @@
 typedef void (*net_ev_handler) (void *usr_handle);
 
 /**
- * struct node_subscr - "node down" subscription entry
+ * struct tipc_node_subscr - "node down" subscription entry
  * @node: ptr to node structure of interest (or NULL, if none)
  * @handle_node_down: routine to invoke when node fails
  * @usr_handle: argument to pass to routine when node fails
  * @nodesub_list: adjacent entries in list of subscriptions for the node
  */
 
-struct node_subscr {
-	struct node *node;
+struct tipc_node_subscr {
+	struct tipc_node *node;
 	net_ev_handler handle_node_down;
 	void *usr_handle;
 	struct list_head nodesub_list;
 };
 
-void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
+void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr,
 			    void *usr_handle, net_ev_handler handle_down);
-void tipc_nodesub_unsubscribe(struct node_subscr *node_sub);
+void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub);
 
 #endif
diff --git a/net/tipc/port.h b/net/tipc/port.h
index e5f8c16429b..ff31ee4a1dc 100644
--- a/net/tipc/port.h
+++ b/net/tipc/port.h
@@ -105,7 +105,7 @@ struct port {
 	u32 probing_interval;
 	u32 last_in_seqno;
 	struct timer_list timer;
-	struct node_subscr subscription;
+	struct tipc_node_subscr subscription;
 };
 
 extern spinlock_t tipc_port_list_lock;
diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index 0326d3060bc..0747d8a9232 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -85,7 +85,7 @@ static struct top_srv topsrv = { 0 };
 
 static u32 htohl(u32 in, int swap)
 {
-	return swap ? (u32)___constant_swab32(in) : in;
+	return swap ? swab32(in) : in;
 }
 
 /**
diff --git a/net/tipc/zone.c b/net/tipc/zone.c
index 3506f856344..2c01ba2d86b 100644
--- a/net/tipc/zone.c
+++ b/net/tipc/zone.c
@@ -111,10 +111,10 @@ void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest)
 	}
 }
 
-struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
+struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
 {
 	struct cluster *c_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 c_num;
 
 	if (!z_ptr)
diff --git a/net/tipc/zone.h b/net/tipc/zone.h
index 6e7a08df8af..7bdc3406ba9 100644
--- a/net/tipc/zone.h
+++ b/net/tipc/zone.h
@@ -54,7 +54,7 @@ struct _zone {
 	u32 links;
 };
 
-struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
+struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
 u32 tipc_zone_select_router(struct _zone *z_ptr, u32 addr, u32 ref);
 void tipc_zone_remove_as_router(struct _zone *z_ptr, u32 router);
 void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest);
diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c
index b210a88d096..7f07152bc10 100644
--- a/net/wanrouter/wanmain.c
+++ b/net/wanrouter/wanmain.c
@@ -57,7 +57,6 @@
 #include <linux/vmalloc.h>	/* vmalloc, vfree */
 #include <asm/uaccess.h>        /* copy_to/from_user */
 #include <linux/init.h>         /* __initfunc et al. */
-#include <net/syncppp.h>
 
 #define KMEM_SAFETYZONE 8
 
@@ -567,9 +566,6 @@ static int wanrouter_device_new_if(struct wan_device *wandev,
 {
 	wanif_conf_t *cnf;
 	struct net_device *dev = NULL;
-#ifdef CONFIG_WANPIPE_MULTPPP
-	struct ppp_device *pppdev=NULL;
-#endif
 	int err;
 
 	if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL))
@@ -588,25 +584,10 @@ static int wanrouter_device_new_if(struct wan_device *wandev,
 		goto out;
 
 	if (cnf->config_id == WANCONFIG_MPPP) {
-#ifdef CONFIG_WANPIPE_MULTPPP
-		pppdev = kzalloc(sizeof(struct ppp_device), GFP_KERNEL);
-		err = -ENOBUFS;
-		if (pppdev == NULL)
-			goto out;
-		pppdev->dev = kzalloc(sizeof(struct net_device), GFP_KERNEL);
-		if (pppdev->dev == NULL) {
-			kfree(pppdev);
-			err = -ENOBUFS;
-			goto out;
-		}
-		err = wandev->new_if(wandev, (struct net_device *)pppdev, cnf);
-		dev = pppdev->dev;
-#else
 		printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n",
 				wandev->name);
 		err = -EPROTONOSUPPORT;
 		goto out;
-#endif
 	} else {
 		dev = kzalloc(sizeof(struct net_device), GFP_KERNEL);
 		err = -ENOBUFS;
@@ -661,17 +642,9 @@ static int wanrouter_device_new_if(struct wan_device *wandev,
 	kfree(dev->priv);
 	dev->priv = NULL;
 
-#ifdef CONFIG_WANPIPE_MULTPPP
-	if (cnf->config_id == WANCONFIG_MPPP)
-		kfree(pppdev);
-	else
-		kfree(dev);
-#else
 	/* Sync PPP is disabled */
 	if (cnf->config_id != WANCONFIG_MPPP)
 		kfree(dev);
-#endif
-
 out:
 	kfree(cnf);
 	return err;
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index ab015c62d56..833b024f8f6 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -39,4 +39,5 @@ config WIRELESS_EXT_SYSFS
 	  files in /sys/class/net/*/wireless/. The same information
 	  is available via the ioctls as well.
 
-	  Say Y if you have programs using it (we don't know of any).
+	  Say Y if you have programs using it, like old versions of
+	  hal.
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b7fefffd2d0..59eb2cf42e5 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -29,16 +29,16 @@ static struct genl_family nl80211_fam = {
 };
 
 /* internal helper: get drv and dev */
-static int get_drv_dev_by_info_ifindex(struct genl_info *info,
+static int get_drv_dev_by_info_ifindex(struct nlattr **attrs,
 				       struct cfg80211_registered_device **drv,
 				       struct net_device **dev)
 {
 	int ifindex;
 
-	if (!info->attrs[NL80211_ATTR_IFINDEX])
+	if (!attrs[NL80211_ATTR_IFINDEX])
 		return -EINVAL;
 
-	ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
+	ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
 	*dev = dev_get_by_index(&init_net, ifindex);
 	if (!*dev)
 		return -ENODEV;
@@ -291,21 +291,31 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *
 
 	mutex_lock(&cfg80211_drv_mutex);
 	list_for_each_entry(dev, &cfg80211_drv_list, list) {
-		if (++wp_idx < wp_start)
+		if (wp_idx < wp_start) {
+			wp_idx++;
 			continue;
+		}
 		if_idx = 0;
 
 		mutex_lock(&dev->devlist_mtx);
 		list_for_each_entry(wdev, &dev->netdev_list, list) {
-			if (++if_idx < if_start)
+			if (if_idx < if_start) {
+				if_idx++;
 				continue;
+			}
 			if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid,
 					       cb->nlh->nlmsg_seq, NLM_F_MULTI,
-					       wdev->netdev) < 0)
-				break;
+					       wdev->netdev) < 0) {
+				mutex_unlock(&dev->devlist_mtx);
+				goto out;
+			}
+			if_idx++;
 		}
 		mutex_unlock(&dev->devlist_mtx);
+
+		wp_idx++;
 	}
+ out:
 	mutex_unlock(&cfg80211_drv_mutex);
 
 	cb->args[0] = wp_idx;
@@ -321,7 +331,7 @@ static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info)
 	struct net_device *netdev;
 	int err;
 
-	err = get_drv_dev_by_info_ifindex(info, &dev, &netdev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev);
 	if (err)
 		return err;
 
@@ -392,7 +402,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 	} else
 		return -EINVAL;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 	ifindex = dev->ifindex;
@@ -477,7 +487,7 @@ static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
 	int ifindex, err;
 	struct net_device *dev;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 	ifindex = dev->ifindex;
@@ -545,7 +555,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -618,7 +628,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 	if (!info->attrs[NL80211_ATTR_KEY_DEFAULT])
 		return -EINVAL;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -699,7 +709,7 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 		return -EINVAL;
 	}
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -735,7 +745,7 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -764,7 +774,7 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
 	struct beacon_parameters params;
 	int haveinfo = 0;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -843,7 +853,7 @@ static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info)
 	int err;
 	struct net_device *dev;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -937,67 +947,78 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 }
 
 static int nl80211_dump_station(struct sk_buff *skb,
-		struct netlink_callback *cb)
+				struct netlink_callback *cb)
 {
-	int wp_idx = 0;
-	int if_idx = 0;
-	int sta_idx = cb->args[2];
-	int wp_start = cb->args[0];
-	int if_start = cb->args[1];
 	struct station_info sinfo;
 	struct cfg80211_registered_device *dev;
-	struct wireless_dev *wdev;
+	struct net_device *netdev;
 	u8 mac_addr[ETH_ALEN];
+	int ifidx = cb->args[0];
+	int sta_idx = cb->args[1];
 	int err;
-	int exit = 0;
 
-	/* TODO: filter by device */
-	mutex_lock(&cfg80211_drv_mutex);
-	list_for_each_entry(dev, &cfg80211_drv_list, list) {
-		if (exit)
+	if (!ifidx) {
+		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
+				  nl80211_policy);
+		if (err)
+			return err;
+
+		if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+			return -EINVAL;
+
+		ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+		if (!ifidx)
+			return -EINVAL;
+	}
+
+	netdev = dev_get_by_index(&init_net, ifidx);
+	if (!netdev)
+		return -ENODEV;
+
+	dev = cfg80211_get_dev_from_ifindex(ifidx);
+	if (IS_ERR(dev)) {
+		err = PTR_ERR(dev);
+		goto out_put_netdev;
+	}
+
+	if (!dev->ops->dump_station) {
+		err = -ENOSYS;
+		goto out_err;
+	}
+
+	rtnl_lock();
+
+	while (1) {
+		err = dev->ops->dump_station(&dev->wiphy, netdev, sta_idx,
+					     mac_addr, &sinfo);
+		if (err == -ENOENT)
 			break;
-		if (++wp_idx < wp_start)
-			continue;
-		if_idx = 0;
+		if (err)
+			goto out_err_rtnl;
 
-		mutex_lock(&dev->devlist_mtx);
-		list_for_each_entry(wdev, &dev->netdev_list, list) {
-			if (exit)
-				break;
-			if (++if_idx < if_start)
-				continue;
-			if (!dev->ops->dump_station)
-				continue;
+		if (nl80211_send_station(skb,
+				NETLINK_CB(cb->skb).pid,
+				cb->nlh->nlmsg_seq, NLM_F_MULTI,
+				netdev, mac_addr,
+				&sinfo) < 0)
+			goto out;
 
-			for (;; ++sta_idx) {
-				rtnl_lock();
-				err = dev->ops->dump_station(&dev->wiphy,
-						wdev->netdev, sta_idx, mac_addr,
-						&sinfo);
-				rtnl_unlock();
-				if (err) {
-					sta_idx = 0;
-					break;
-				}
-				if (nl80211_send_station(skb,
-						NETLINK_CB(cb->skb).pid,
-						cb->nlh->nlmsg_seq, NLM_F_MULTI,
-						wdev->netdev, mac_addr,
-						&sinfo) < 0) {
-					exit = 1;
-					break;
-				}
-			}
-		}
-		mutex_unlock(&dev->devlist_mtx);
+		sta_idx++;
 	}
-	mutex_unlock(&cfg80211_drv_mutex);
 
-	cb->args[0] = wp_idx;
-	cb->args[1] = if_idx;
-	cb->args[2] = sta_idx;
 
-	return skb->len;
+ out:
+	cb->args[1] = sta_idx;
+	err = skb->len;
+ out_err_rtnl:
+	rtnl_unlock();
+ out_err:
+	cfg80211_put_dev(dev);
+ out_put_netdev:
+	dev_put(netdev);
+
+	return err;
 }
 
 static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
@@ -1016,7 +1037,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
 
 	mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1112,7 +1133,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 		params.plink_action =
 		    nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1172,7 +1193,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 				&params.station_flags))
 		return -EINVAL;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1207,7 +1228,7 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1277,68 +1298,78 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq,
 }
 
 static int nl80211_dump_mpath(struct sk_buff *skb,
-		struct netlink_callback *cb)
+			      struct netlink_callback *cb)
 {
-	int wp_idx = 0;
-	int if_idx = 0;
-	int sta_idx = cb->args[2];
-	int wp_start = cb->args[0];
-	int if_start = cb->args[1];
 	struct mpath_info pinfo;
 	struct cfg80211_registered_device *dev;
-	struct wireless_dev *wdev;
+	struct net_device *netdev;
 	u8 dst[ETH_ALEN];
 	u8 next_hop[ETH_ALEN];
+	int ifidx = cb->args[0];
+	int path_idx = cb->args[1];
 	int err;
-	int exit = 0;
 
-	/* TODO: filter by device */
-	mutex_lock(&cfg80211_drv_mutex);
-	list_for_each_entry(dev, &cfg80211_drv_list, list) {
-		if (exit)
+	if (!ifidx) {
+		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
+				  nl80211_policy);
+		if (err)
+			return err;
+
+		if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+			return -EINVAL;
+
+		ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+		if (!ifidx)
+			return -EINVAL;
+	}
+
+	netdev = dev_get_by_index(&init_net, ifidx);
+	if (!netdev)
+		return -ENODEV;
+
+	dev = cfg80211_get_dev_from_ifindex(ifidx);
+	if (IS_ERR(dev)) {
+		err = PTR_ERR(dev);
+		goto out_put_netdev;
+	}
+
+	if (!dev->ops->dump_mpath) {
+		err = -ENOSYS;
+		goto out_err;
+	}
+
+	rtnl_lock();
+
+	while (1) {
+		err = dev->ops->dump_mpath(&dev->wiphy, netdev, path_idx,
+					   dst, next_hop, &pinfo);
+		if (err == -ENOENT)
 			break;
-		if (++wp_idx < wp_start)
-			continue;
-		if_idx = 0;
+		if (err)
+			goto out_err_rtnl;
 
-		mutex_lock(&dev->devlist_mtx);
-		list_for_each_entry(wdev, &dev->netdev_list, list) {
-			if (exit)
-				break;
-			if (++if_idx < if_start)
-				continue;
-			if (!dev->ops->dump_mpath)
-				continue;
+		if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).pid,
+				       cb->nlh->nlmsg_seq, NLM_F_MULTI,
+				       netdev, dst, next_hop,
+				       &pinfo) < 0)
+			goto out;
 
-			for (;; ++sta_idx) {
-				rtnl_lock();
-				err = dev->ops->dump_mpath(&dev->wiphy,
-						wdev->netdev, sta_idx, dst,
-						next_hop, &pinfo);
-				rtnl_unlock();
-				if (err) {
-					sta_idx = 0;
-					break;
-				}
-				if (nl80211_send_mpath(skb,
-						NETLINK_CB(cb->skb).pid,
-						cb->nlh->nlmsg_seq, NLM_F_MULTI,
-						wdev->netdev, dst, next_hop,
-						&pinfo) < 0) {
-					exit = 1;
-					break;
-				}
-			}
-		}
-		mutex_unlock(&dev->devlist_mtx);
+		path_idx++;
 	}
-	mutex_unlock(&cfg80211_drv_mutex);
 
-	cb->args[0] = wp_idx;
-	cb->args[1] = if_idx;
-	cb->args[2] = sta_idx;
 
-	return skb->len;
+ out:
+	cb->args[1] = path_idx;
+	err = skb->len;
+ out_err_rtnl:
+	rtnl_unlock();
+ out_err:
+	cfg80211_put_dev(dev);
+ out_put_netdev:
+	dev_put(netdev);
+
+	return err;
 }
 
 static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
@@ -1358,7 +1389,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
 
 	dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1411,7 +1442,7 @@ static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info)
 	dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 	next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1446,7 +1477,7 @@ static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info)
 	dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 	next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1475,7 +1506,7 @@ static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
diff --git a/net/wireless/wext.c b/net/wireless/wext.c
index df5b3886c36..d98ffb75119 100644
--- a/net/wireless/wext.c
+++ b/net/wireless/wext.c
@@ -1277,6 +1277,7 @@ static int rtnetlink_fill_iwinfo(struct sk_buff *skb, struct net_device *dev,
 	r->ifi_flags = dev_get_flags(dev);
 	r->ifi_change = 0;	/* Wireless changes don't affect those flags */
 
+	NLA_PUT_STRING(skb, IFLA_IFNAME, dev->name);
 	/* Add the wireless events in the netlink packet */
 	NLA_PUT(skb, IFLA_WIRELESS, event_len, event);
 
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 3f964db908a..ac25b4c0e98 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -112,16 +112,13 @@ error_nolock:
 int xfrm_output_resume(struct sk_buff *skb, int err)
 {
 	while (likely((err = xfrm_output_one(skb, err)) == 0)) {
-		struct xfrm_state *x;
-
 		nf_reset(skb);
 
 		err = skb->dst->ops->local_out(skb);
 		if (unlikely(err != 1))
 			goto out;
 
-		x = skb->dst->xfrm;
-		if (!x)
+		if (!skb->dst->xfrm)
 			return dst_output(skb);
 
 		err = nf_hook(skb->dst->ops->family,
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 841b32a2e68..b7754b1b73a 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1077,6 +1077,7 @@ static void __xfrm_policy_link(struct xfrm_policy *pol, int dir)
 	struct hlist_head *chain = policy_hash_bysel(&pol->selector,
 						     pol->family, dir);
 
+	list_add_tail(&pol->bytype, &xfrm_policy_bytype[pol->type]);
 	hlist_add_head(&pol->bydst, chain);
 	hlist_add_head(&pol->byidx, xfrm_policy_byidx+idx_hash(pol->index));
 	xfrm_policy_count[dir]++;
@@ -1731,8 +1732,7 @@ restart:
 			 * We can't enlist stable bundles either.
 			 */
 			write_unlock_bh(&policy->lock);
-			if (dst)
-				dst_free(dst);
+			dst_free(dst);
 
 			if (pol_dead)
 				XFRM_INC_STATS(LINUX_MIB_XFRMOUTPOLDEAD);
@@ -1748,8 +1748,7 @@ restart:
 			err = xfrm_dst_update_origin(dst, fl);
 		if (unlikely(err)) {
 			write_unlock_bh(&policy->lock);
-			if (dst)
-				dst_free(dst);
+			dst_free(dst);
 			XFRM_INC_STATS(LINUX_MIB_XFRMOUTBUNDLECHECKERROR);
 			goto error;
 		}
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 4c6914ef7d9..0a8f09c3144 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -780,11 +780,13 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 {
 	unsigned int h;
 	struct hlist_node *entry;
-	struct xfrm_state *x, *x0;
+	struct xfrm_state *x, *x0, *to_put;
 	int acquire_in_progress = 0;
 	int error = 0;
 	struct xfrm_state *best = NULL;
 
+	to_put = NULL;
+
 	spin_lock_bh(&xfrm_state_lock);
 	h = xfrm_dst_hash(daddr, saddr, tmpl->reqid, family);
 	hlist_for_each_entry(x, entry, xfrm_state_bydst+h, bydst) {
@@ -833,7 +835,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 		if (tmpl->id.spi &&
 		    (x0 = __xfrm_state_lookup(daddr, tmpl->id.spi,
 					      tmpl->id.proto, family)) != NULL) {
-			xfrm_state_put(x0);
+			to_put = x0;
 			error = -EEXIST;
 			goto out;
 		}
@@ -849,13 +851,14 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 		error = security_xfrm_state_alloc_acquire(x, pol->security, fl->secid);
 		if (error) {
 			x->km.state = XFRM_STATE_DEAD;
-			xfrm_state_put(x);
+			to_put = x;
 			x = NULL;
 			goto out;
 		}
 
 		if (km_query(x, tmpl, pol) == 0) {
 			x->km.state = XFRM_STATE_ACQ;
+			list_add_tail(&x->all, &xfrm_state_all);
 			hlist_add_head(&x->bydst, xfrm_state_bydst+h);
 			h = xfrm_src_hash(daddr, saddr, family);
 			hlist_add_head(&x->bysrc, xfrm_state_bysrc+h);
@@ -870,7 +873,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 			xfrm_hash_grow_check(x->bydst.next != NULL);
 		} else {
 			x->km.state = XFRM_STATE_DEAD;
-			xfrm_state_put(x);
+			to_put = x;
 			x = NULL;
 			error = -ESRCH;
 		}
@@ -881,6 +884,8 @@ out:
 	else
 		*err = acquire_in_progress ? -EAGAIN : error;
 	spin_unlock_bh(&xfrm_state_lock);
+	if (to_put)
+		xfrm_state_put(to_put);
 	return x;
 }
 
@@ -1051,6 +1056,7 @@ static struct xfrm_state *__find_acq_core(unsigned short family, u8 mode, u32 re
 		xfrm_state_hold(x);
 		x->timer.expires = jiffies + sysctl_xfrm_acq_expires*HZ;
 		add_timer(&x->timer);
+		list_add_tail(&x->all, &xfrm_state_all);
 		hlist_add_head(&x->bydst, xfrm_state_bydst+h);
 		h = xfrm_src_hash(daddr, saddr, family);
 		hlist_add_head(&x->bysrc, xfrm_state_bysrc+h);
@@ -1067,18 +1073,20 @@ static struct xfrm_state *__xfrm_find_acq_byseq(u32 seq);
 
 int xfrm_state_add(struct xfrm_state *x)
 {
-	struct xfrm_state *x1;
+	struct xfrm_state *x1, *to_put;
 	int family;
 	int err;
 	int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY);
 
 	family = x->props.family;
 
+	to_put = NULL;
+
 	spin_lock_bh(&xfrm_state_lock);
 
 	x1 = __xfrm_state_locate(x, use_spi, family);
 	if (x1) {
-		xfrm_state_put(x1);
+		to_put = x1;
 		x1 = NULL;
 		err = -EEXIST;
 		goto out;
@@ -1088,7 +1096,7 @@ int xfrm_state_add(struct xfrm_state *x)
 		x1 = __xfrm_find_acq_byseq(x->km.seq);
 		if (x1 && ((x1->id.proto != x->id.proto) ||
 		    xfrm_addr_cmp(&x1->id.daddr, &x->id.daddr, family))) {
-			xfrm_state_put(x1);
+			to_put = x1;
 			x1 = NULL;
 		}
 	}
@@ -1110,6 +1118,9 @@ out:
 		xfrm_state_put(x1);
 	}
 
+	if (to_put)
+		xfrm_state_put(to_put);
+
 	return err;
 }
 EXPORT_SYMBOL(xfrm_state_add);
@@ -1269,10 +1280,12 @@ EXPORT_SYMBOL(xfrm_state_migrate);
 
 int xfrm_state_update(struct xfrm_state *x)
 {
-	struct xfrm_state *x1;
+	struct xfrm_state *x1, *to_put;
 	int err;
 	int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY);
 
+	to_put = NULL;
+
 	spin_lock_bh(&xfrm_state_lock);
 	x1 = __xfrm_state_locate(x, use_spi, x->props.family);
 
@@ -1281,7 +1294,7 @@ int xfrm_state_update(struct xfrm_state *x)
 		goto out;
 
 	if (xfrm_state_kern(x1)) {
-		xfrm_state_put(x1);
+		to_put = x1;
 		err = -EEXIST;
 		goto out;
 	}
@@ -1295,6 +1308,9 @@ int xfrm_state_update(struct xfrm_state *x)
 out:
 	spin_unlock_bh(&xfrm_state_lock);
 
+	if (to_put)
+		xfrm_state_put(to_put);
+
 	if (err)
 		return err;
 
diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst
index f63a663de15..6bf8e87f1dc 100644
--- a/scripts/Makefile.fwinst
+++ b/scripts/Makefile.fwinst
@@ -50,8 +50,12 @@ PHONY +=  __fw_install __fw_modinst FORCE
 .PHONY: $(PHONY)
 
 __fw_install: $(installed-fw)
+
 __fw_modinst: $(installed-mod-fw)
+	@:
+
 __fw_modbuild: $(addprefix $(obj)/,$(mod-fw))
+	@:
 
 FORCE:
 
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index 4f8a3007e45..c249274e005 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -545,6 +545,8 @@ int main(int argc, char **argv)
 			}
 			fputs(sym->name, dumpfile);
 			putc(' ', dumpfile);
+			if (sym->is_extern)
+				fputs("extern ", dumpfile);
 			print_list(dumpfile, sym->defn);
 			putc('\n', dumpfile);
 
diff --git a/scripts/genksyms/lex.c_shipped b/scripts/genksyms/lex.c_shipped
index 2a176988d46..2ac23bcca5b 100644
--- a/scripts/genksyms/lex.c_shipped
+++ b/scripts/genksyms/lex.c_shipped
@@ -6,10 +6,19 @@
 
 /* A lexical scanner generated by flex */
 
+/* %not-for-header */
+
+/* %if-c-only */
+/* %if-not-reentrant */
+
+/* %endif */
+/* %endif */
+/* %ok-for-header */
+
 #define FLEX_SCANNER
 #define YY_FLEX_MAJOR_VERSION 2
 #define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 33
+#define YY_FLEX_SUBMINOR_VERSION 35
 #if YY_FLEX_SUBMINOR_VERSION > 0
 #define FLEX_BETA
 #endif
@@ -47,7 +56,7 @@
 
 /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
 
-#if __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
 
 /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
  * if you want the limit (max/min) macros for int types. 
@@ -70,7 +79,6 @@ typedef int flex_int32_t;
 typedef unsigned char flex_uint8_t; 
 typedef unsigned short int flex_uint16_t;
 typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
 
 /* Limits of integral types. */
 #ifndef INT8_MIN
@@ -101,6 +109,8 @@ typedef unsigned int flex_uint32_t;
 #define UINT32_MAX             (4294967295U)
 #endif
 
+#endif /* ! C99 */
+
 #endif /* ! FLEXINT_H */
 
 /* %endif */
@@ -115,11 +125,12 @@ typedef unsigned int flex_uint32_t;
 
 #else	/* ! __cplusplus */
 
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
 
 #define YY_USE_CONST
 
-#endif	/* __STDC__ */
+#endif	/* defined (__STDC__) */
 #endif	/* ! __cplusplus */
 
 #ifdef YY_USE_CONST
@@ -218,14 +229,9 @@ extern FILE *yyin, *yyout;
 
 #define unput(c) yyunput( c, (yytext_ptr)  )
 
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-
 #ifndef YY_TYPEDEF_YY_SIZE_T
 #define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
 #endif
 
 #ifndef YY_STRUCT_YY_BUFFER_STATE
@@ -401,7 +407,7 @@ void yyfree (void *  );
 /* %% [1.0] yytext/yyin/yyout/yy_state_type/yylineno etc. def's & init go here */
 /* Begin user sect3 */
 
-#define yywrap() 1
+#define yywrap(n) 1
 #define YY_SKIP_YYWRAP
 
 #define FLEX_DEBUG
@@ -613,8 +619,8 @@ int yy_flex_debug = 1;
 
 static yyconst flex_int16_t yy_rule_linenum[13] =
     {   0,
-       69,   70,   71,   74,   77,   78,   79,   85,   86,   87,
-       89,   92
+       71,   72,   73,   76,   79,   80,   81,   87,   88,   89,
+       91,   94
     } ;
 
 /* The intent behind this definition is that it'll catch
@@ -665,7 +671,8 @@ char *yytext;
    quite so pedantic.  */
 
 /* We don't do multiple input files.  */
-#line 669 "scripts/genksyms/lex.c"
+#define YY_NO_INPUT 1
+#line 676 "scripts/genksyms/lex.c"
 
 #define INITIAL 0
 #define V2_TOKENS 1
@@ -695,9 +702,39 @@ static int yy_init_globals (void );
 /* %endif */
 /* %if-reentrant */
 /* %endif */
+/* %endif End reentrant structures and macros. */
+
+/* Accessor methods to globals.
+   These are made visible to non-reentrant scanners for convenience. */
+
+int yylex_destroy (void );
+
+int yyget_debug (void );
+
+void yyset_debug (int debug_flag  );
+
+YY_EXTRA_TYPE yyget_extra (void );
+
+void yyset_extra (YY_EXTRA_TYPE user_defined  );
+
+FILE *yyget_in (void );
+
+void yyset_in  (FILE * in_str  );
+
+FILE *yyget_out (void );
+
+void yyset_out  (FILE * out_str  );
+
+int yyget_leng (void );
+
+char *yyget_text (void );
+
+int yyget_lineno (void );
+
+void yyset_lineno (int line_number  );
+
 /* %if-bison-bridge */
 /* %endif */
-/* %endif End reentrant structures and macros. */
 
 /* Macros after this point can all be overridden by user definitions in
  * section 1.
@@ -756,7 +793,7 @@ static int input (void );
 /* This used to be an fputs(), but since the string might contain NUL's,
  * we now use fwrite().
  */
-#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
+#define ECHO fwrite( yytext, yyleng, 1, yyout )
 /* %endif */
 /* %if-c++-only C++ definition */
 /* %endif */
@@ -881,12 +918,12 @@ YY_DECL
 	register int yy_act;
     
 /* %% [7.0] user's declarations go here */
-#line 65 "scripts/genksyms/lex.l"
+#line 67 "scripts/genksyms/lex.l"
 
 
 
  /* Keep track of our location in the original source files.  */
-#line 890 "scripts/genksyms/lex.c"
+#line 927 "scripts/genksyms/lex.c"
 
 	if ( !(yy_init) )
 		{
@@ -1004,42 +1041,42 @@ do_action:	/* This label is used only to access EOF actions. */
 case 1:
 /* rule 1 can match eol */
 YY_RULE_SETUP
-#line 69 "scripts/genksyms/lex.l"
+#line 71 "scripts/genksyms/lex.l"
 return FILENAME;
 	YY_BREAK
 case 2:
 /* rule 2 can match eol */
 YY_RULE_SETUP
-#line 70 "scripts/genksyms/lex.l"
+#line 72 "scripts/genksyms/lex.l"
 cur_line++;
 	YY_BREAK
 case 3:
 /* rule 3 can match eol */
 YY_RULE_SETUP
-#line 71 "scripts/genksyms/lex.l"
+#line 73 "scripts/genksyms/lex.l"
 cur_line++;
 	YY_BREAK
 /* Ignore all other whitespace.  */
 case 4:
 YY_RULE_SETUP
-#line 74 "scripts/genksyms/lex.l"
+#line 76 "scripts/genksyms/lex.l"
 ;
 	YY_BREAK
 case 5:
 /* rule 5 can match eol */
 YY_RULE_SETUP
-#line 77 "scripts/genksyms/lex.l"
+#line 79 "scripts/genksyms/lex.l"
 return STRING;
 	YY_BREAK
 case 6:
 /* rule 6 can match eol */
 YY_RULE_SETUP
-#line 78 "scripts/genksyms/lex.l"
+#line 80 "scripts/genksyms/lex.l"
 return CHAR;
 	YY_BREAK
 case 7:
 YY_RULE_SETUP
-#line 79 "scripts/genksyms/lex.l"
+#line 81 "scripts/genksyms/lex.l"
 return IDENT;
 	YY_BREAK
 /* The Pedant requires that the other C multi-character tokens be
@@ -1048,36 +1085,36 @@ return IDENT;
     around them properly.  */
 case 8:
 YY_RULE_SETUP
-#line 85 "scripts/genksyms/lex.l"
+#line 87 "scripts/genksyms/lex.l"
 return OTHER;
 	YY_BREAK
 case 9:
 YY_RULE_SETUP
-#line 86 "scripts/genksyms/lex.l"
+#line 88 "scripts/genksyms/lex.l"
 return INT;
 	YY_BREAK
 case 10:
 YY_RULE_SETUP
-#line 87 "scripts/genksyms/lex.l"
+#line 89 "scripts/genksyms/lex.l"
 return REAL;
 	YY_BREAK
 case 11:
 YY_RULE_SETUP
-#line 89 "scripts/genksyms/lex.l"
+#line 91 "scripts/genksyms/lex.l"
 return DOTS;
 	YY_BREAK
 /* All other tokens are single characters.  */
 case 12:
 YY_RULE_SETUP
-#line 92 "scripts/genksyms/lex.l"
+#line 94 "scripts/genksyms/lex.l"
 return yytext[0];
 	YY_BREAK
 case 13:
 YY_RULE_SETUP
-#line 95 "scripts/genksyms/lex.l"
+#line 97 "scripts/genksyms/lex.l"
 ECHO;
 	YY_BREAK
-#line 1081 "scripts/genksyms/lex.c"
+#line 1118 "scripts/genksyms/lex.c"
 case YY_STATE_EOF(INITIAL):
 case YY_STATE_EOF(V2_TOKENS):
 	yyterminate();
@@ -1346,6 +1383,14 @@ static int yy_get_next_buffer (void)
 	else
 		ret_val = EOB_ACT_CONTINUE_SCAN;
 
+	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+		/* Extend the array by 50%, plus the number we really need. */
+		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
+		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+	}
+
 	(yy_n_chars) += number_to_move;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
@@ -1851,7 +1896,9 @@ static void yyensure_buffer_stack (void)
 		(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
 								(num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
-		
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+								  
 		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
 				
 		(yy_buffer_stack_max) = num_to_alloc;
@@ -1869,6 +1916,8 @@ static void yyensure_buffer_stack (void)
 								((yy_buffer_stack),
 								num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
 
 		/* zero only the new slots.*/
 		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
@@ -2092,7 +2141,7 @@ void yyset_debug (int  bdebug )
 /* %if-reentrant */
 /* %if-bison-bridge */
 /* %endif */
-/* %endif */
+/* %endif if-c-only */
 
 /* %if-c-only */
 static int yy_init_globals (void)
@@ -2124,13 +2173,9 @@ static int yy_init_globals (void)
 }
 /* %endif */
 
-/* %if-c-or-c++ */
-/* %if-c-only */
+/* %if-c-only SNIP! this currently causes conflicts with the c++ scanner */
 /* yylex_destroy is for both reentrant and non-reentrant scanners. */
 int yylex_destroy  (void)
-/* %endif */
-/* %if-c++-only */
-/* %endif */
 {
     
     /* Pop the buffer stack, destroying each element. */
@@ -2144,11 +2189,6 @@ int yylex_destroy  (void)
 	yyfree((yy_buffer_stack) );
 	(yy_buffer_stack) = NULL;
 
-/* %if-c++-only */
-/* %endif */
-
-/* %if-c-only */
-
     /* Reset the globals. This is important in a non-reentrant scanner so the next time
      * yylex() is called, initialization will occur. */
     yy_init_globals( );
@@ -2156,7 +2196,6 @@ int yylex_destroy  (void)
 /* %if-reentrant */
 /* %endif */
     return 0;
-/* %endif */
 }
 /* %endif */
 
@@ -2213,7 +2252,7 @@ void yyfree (void * ptr )
 
 /* %ok-for-header */
 
-#line 95 "scripts/genksyms/lex.l"
+#line 97 "scripts/genksyms/lex.l"
 
 
 
diff --git a/scripts/genksyms/lex.l b/scripts/genksyms/lex.l
index 5e544a06678..fe50ff9dacd 100644
--- a/scripts/genksyms/lex.l
+++ b/scripts/genksyms/lex.l
@@ -62,6 +62,8 @@ MC_TOKEN		([~%^&*+=|<>/-]=)|(&&)|("||")|(->)|(<<)|(>>)
 /* We don't do multiple input files.  */
 %option noyywrap
 
+%option noinput
+
 %%
 
 
diff --git a/scripts/genksyms/parse.c_shipped b/scripts/genksyms/parse.c_shipped
index 3e6079f36b9..eaee44e66a4 100644
--- a/scripts/genksyms/parse.c_shipped
+++ b/scripts/genksyms/parse.c_shipped
@@ -504,7 +504,7 @@ static const yytype_uint16 yyprhs[] =
      239,   242,   245,   247,   248,   250,   252,   257,   262,   265,
      269,   273,   277,   278,   280,   283,   287,   291,   292,   294,
      296,   299,   303,   306,   307,   309,   311,   315,   318,   321,
-     323,   326,   327,   329,   332,   333,   335
+     323,   326,   327,   330,   333,   334,   336
 };
 
 /* YYRHS -- A `-1'-separated list of the rules' RHS.  */
@@ -542,9 +542,9 @@ static const yytype_int8 yyrhs[] =
       -1,    -1,    89,    -1,    90,    -1,    89,    90,    -1,    64,
       91,    44,    -1,     1,    44,    -1,    -1,    92,    -1,    93,
       -1,    92,    46,    93,    -1,    76,    95,    -1,    37,    94,
-      -1,    94,    -1,    52,    34,    -1,    -1,    31,    -1,    30,
-      44,    -1,    -1,    30,    -1,    29,    47,    37,    49,    44,
-      -1
+      -1,    94,    -1,    52,    34,    -1,    -1,    95,    31,    -1,
+      30,    44,    -1,    -1,    30,    -1,    29,    47,    37,    49,
+      44,    -1
 };
 
 /* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
@@ -647,7 +647,7 @@ static const yytype_uint8 yyr2[] =
        2,     2,     1,     0,     1,     1,     4,     4,     2,     3,
        3,     3,     0,     1,     2,     3,     3,     0,     1,     1,
        2,     3,     2,     0,     1,     1,     3,     2,     2,     1,
-       2,     0,     1,     2,     0,     1,     5
+       2,     0,     2,     2,     0,     1,     5
 };
 
 /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
@@ -667,9 +667,9 @@ static const yytype_uint8 yydefact[] =
        0,    66,   125,   101,   121,    71,     0,     7,   112,   106,
       76,    77,     0,     0,     0,   121,    75,     0,   114,   115,
      119,   105,     0,   110,   124,     0,    36,     0,    73,    72,
-      61,    20,   122,   102,     0,    93,     0,    84,    87,    88,
-     118,     0,    76,     0,   120,    74,   117,    80,     0,   111,
-       0,    35,   126,     0,    21,   103,    70,    94,    56,     0,
+      61,    20,   102,     0,    93,     0,    84,    87,    88,   118,
+       0,    76,     0,   120,    74,   117,    80,     0,   111,     0,
+      35,   126,   122,     0,    21,   103,    70,    94,    56,     0,
       93,    90,    92,    69,    83,     0,    82,    81,     0,     0,
      116,   104,     0,    95,     0,    91,    98,     0,    85,    89,
       79,    78,   100,    99,     0,     0,    97,    96
@@ -680,44 +680,44 @@ static const yytype_int16 yydefgoto[] =
 {
       -1,     1,     2,     3,    35,    72,    55,    36,    64,    65,
       66,    75,    38,    39,    40,    41,    42,    67,    86,    87,
-      43,   114,    69,   105,   106,   126,   127,   128,   129,   151,
+      43,   114,    69,   105,   106,   125,   126,   127,   128,   151,
      152,    44,   144,   145,    54,    76,    77,    78,   107,   108,
-     109,   110,   123,    45,    94,    46
+     109,   110,   122,    45,    94,    46
 };
 
 /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
    STATE-NUM.  */
-#define YYPACT_NINF -135
+#define YYPACT_NINF -134
 static const yytype_int16 yypact[] =
 {
-    -135,    11,  -135,   312,  -135,  -135,    24,  -135,  -135,  -135,
-    -135,  -135,   -23,  -135,    -2,  -135,  -135,  -135,  -135,  -135,
-    -135,  -135,  -135,  -135,   -17,  -135,   -11,  -135,  -135,  -135,
-      -3,    16,    26,  -135,  -135,  -135,  -135,    34,   482,  -135,
-    -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,
-      -8,  -135,    22,    97,  -135,   482,    22,  -135,   482,    56,
-    -135,  -135,    12,    10,    50,    49,  -135,    34,   -13,    15,
-    -135,  -135,   482,  -135,    47,   -25,    51,   145,  -135,  -135,
-      34,  -135,   356,    52,    71,    77,  -135,    10,  -135,  -135,
-      34,  -135,  -135,  -135,    68,  -135,   193,  -135,  -135,  -135,
-      48,  -135,     6,    93,    37,    68,    18,    85,    84,  -135,
-    -135,  -135,    87,  -135,   102,    86,  -135,    89,  -135,  -135,
-    -135,  -135,  -135,    90,    88,   401,    94,   100,   101,  -135,
-    -135,    99,  -135,   108,  -135,  -135,  -135,  -135,   230,  -135,
-     -25,  -135,  -135,   105,  -135,  -135,  -135,  -135,  -135,     9,
-      42,  -135,    28,  -135,  -135,   445,  -135,  -135,   119,   125,
-    -135,  -135,   126,  -135,   128,  -135,  -135,   267,  -135,  -135,
-    -135,  -135,  -135,  -135,   129,   130,  -135,  -135
+    -134,    16,  -134,   312,  -134,  -134,    20,  -134,  -134,  -134,
+    -134,  -134,   -18,  -134,    -3,  -134,  -134,  -134,  -134,  -134,
+    -134,  -134,  -134,  -134,   -26,  -134,   -25,  -134,  -134,  -134,
+      -7,     5,    27,  -134,  -134,  -134,  -134,    46,   482,  -134,
+    -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,
+      -8,  -134,    30,    97,  -134,   482,    30,  -134,   482,     7,
+    -134,  -134,    12,    10,    42,    55,  -134,    46,   -15,    15,
+    -134,  -134,   482,  -134,    25,    26,    47,   145,  -134,  -134,
+      46,  -134,   356,    39,    71,    77,  -134,    10,  -134,  -134,
+      46,  -134,  -134,  -134,  -134,  -134,   193,  -134,  -134,  -134,
+      75,  -134,     6,    95,    43,  -134,    28,    86,    85,  -134,
+    -134,  -134,    88,  -134,   103,    87,  -134,    91,  -134,  -134,
+    -134,  -134,   -23,    90,   401,    94,   101,   102,  -134,  -134,
+      98,  -134,   108,  -134,  -134,   109,  -134,   230,  -134,    26,
+    -134,  -134,  -134,   134,  -134,  -134,  -134,  -134,  -134,     9,
+      48,  -134,    35,  -134,  -134,   445,  -134,  -134,   125,   126,
+    -134,  -134,   128,  -134,   129,  -134,  -134,   267,  -134,  -134,
+    -134,  -134,  -134,  -134,   130,   131,  -134,  -134
 };
 
 /* YYPGOTO[NTERM-NUM].  */
 static const yytype_int16 yypgoto[] =
 {
-    -135,  -135,   179,  -135,  -135,  -135,  -135,   -47,  -135,  -135,
-      91,     0,   -58,   -37,  -135,  -135,  -135,   -73,  -135,  -135,
-     -48,   -32,  -135,   -38,  -135,  -134,  -135,  -135,    29,   -63,
-    -135,  -135,  -135,  -135,   -20,  -135,  -135,   106,  -135,  -135,
-      45,    95,    82,  -135,  -135,  -135
+    -134,  -134,   180,  -134,  -134,  -134,  -134,   -33,  -134,  -134,
+      93,     0,   -58,   -37,  -134,  -134,  -134,   -73,  -134,  -134,
+     -54,   -32,  -134,   -81,  -134,  -133,  -134,  -134,    29,   -50,
+    -134,  -134,  -134,  -134,   -20,  -134,  -134,   110,  -134,  -134,
+      49,    96,    80,  -134,  -134,  -134
 };
 
 /* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
@@ -727,26 +727,26 @@ static const yytype_int16 yypgoto[] =
 #define YYTABLE_NINF -109
 static const yytype_int16 yytable[] =
 {
-      82,    70,   104,    37,   159,    68,    57,   131,    79,    49,
-     162,     4,   100,    84,    50,    88,   101,    92,    10,    93,
-      52,    51,   102,    63,    71,    97,    56,   103,    20,   104,
-      85,   104,    73,   175,    53,    91,    81,    29,   125,   120,
-      53,    33,   -93,   132,    58,    70,   147,   101,    95,    61,
-     163,   137,   150,   102,    63,    80,   149,    63,   -93,    62,
-      63,   166,    96,    59,   133,   138,   135,   104,    47,    48,
-      60,    61,    80,    53,   132,   167,   150,   150,   101,   147,
-     125,    62,    63,   163,   102,    63,   164,   165,    70,   149,
-      63,    98,    99,    83,    89,    90,   111,   125,    74,   122,
-     103,   117,     7,     8,     9,    10,    11,    12,    13,   125,
+      82,    70,   104,    37,   159,    68,    57,   130,   142,    88,
+     162,    52,    56,    84,    49,    92,     4,    93,    10,    50,
+      51,   132,    79,   134,    71,    53,    53,   143,    20,   104,
+      85,   104,    73,   120,   175,    91,    81,    29,   124,    97,
+      58,    33,   -93,   131,    83,    70,   147,   101,    95,    61,
+     163,   150,    59,   102,    63,    80,   149,    63,   -93,    62,
+      63,   136,    96,   100,    47,    48,   104,   101,   166,    98,
+      99,    60,    80,   102,    63,   137,   150,   150,   103,   124,
+     131,    53,   167,    61,   101,   147,    89,    70,   117,   163,
+     102,    63,   111,    62,    63,   149,    63,   124,    74,   164,
+     165,    90,     7,     8,     9,    10,    11,    12,    13,   124,
       15,    16,    17,    18,    19,    20,    21,    22,    23,    24,
-     118,    26,    27,    28,    29,    30,   119,   134,    33,   139,
-     140,    98,    92,   142,   -22,   141,   154,   146,    34,   161,
-     143,   -22,  -107,   153,   -22,   -22,   112,   155,   156,   -22,
+     118,    26,    27,    28,    29,    30,   119,   103,    33,   133,
+     138,   139,    98,    92,   -22,   141,   140,   154,    34,   146,
+     142,   -22,  -107,   153,   -22,   -22,   112,   156,   155,   -22,
        7,     8,     9,    10,    11,    12,    13,   157,    15,    16,
-      17,    18,    19,    20,    21,    22,    23,    24,   170,    26,
-      27,    28,    29,    30,   171,   172,    33,   173,   176,   177,
-       5,   121,   -22,   113,   169,   160,    34,   136,     0,   -22,
-    -108,     0,   -22,   -22,   124,   130,     0,   -22,     7,     8,
+      17,    18,    19,    20,    21,    22,    23,    24,   161,    26,
+      27,    28,    29,    30,   170,   171,    33,   172,   173,   176,
+     177,     5,   -22,   121,   169,   135,    34,   113,   160,   -22,
+    -108,     0,   -22,   -22,   123,     0,   129,   -22,     7,     8,
        9,    10,    11,    12,    13,     0,    15,    16,    17,    18,
       19,    20,    21,    22,    23,    24,     0,    26,    27,    28,
       29,    30,     0,     0,    33,     0,     0,     0,     0,   -86,
@@ -784,26 +784,26 @@ static const yytype_int16 yytable[] =
 
 static const yytype_int16 yycheck[] =
 {
-      58,    38,    75,     3,   138,    37,    26,     1,    55,    32,
-       1,     0,    37,     1,    37,    63,    41,    30,     8,    32,
-      37,    23,    47,    48,    32,    72,    37,    52,    18,   102,
-      62,   104,    52,   167,    51,    67,    56,    27,    96,    87,
-      51,    31,    33,    37,    47,    82,    37,    41,    33,    37,
-      41,    33,   125,    47,    48,    55,    47,    48,    49,    47,
-      48,    33,    47,    47,   102,    47,   104,   140,    44,    45,
-      44,    37,    72,    51,    37,    47,   149,   150,    41,    37,
-     138,    47,    48,    41,    47,    48,   149,   150,   125,    47,
-      48,    44,    45,    37,    44,    46,    45,   155,     1,    31,
-      52,    49,     5,     6,     7,     8,     9,    10,    11,   167,
+      58,    38,    75,     3,   137,    37,    26,     1,    31,    63,
+       1,    37,    37,     1,    32,    30,     0,    32,     8,    37,
+      23,   102,    55,   104,    32,    51,    51,    50,    18,   102,
+      62,   104,    52,    87,   167,    67,    56,    27,    96,    72,
+      47,    31,    33,    37,    37,    82,    37,    41,    33,    37,
+      41,   124,    47,    47,    48,    55,    47,    48,    49,    47,
+      48,    33,    47,    37,    44,    45,   139,    41,    33,    44,
+      45,    44,    72,    47,    48,    47,   149,   150,    52,   137,
+      37,    51,    47,    37,    41,    37,    44,   124,    49,    41,
+      47,    48,    45,    47,    48,    47,    48,   155,     1,   149,
+     150,    46,     5,     6,     7,     8,     9,    10,    11,   167,
       13,    14,    15,    16,    17,    18,    19,    20,    21,    22,
-      49,    24,    25,    26,    27,    28,    49,    34,    31,    44,
-      46,    44,    30,    44,    37,    49,    36,    49,    41,    34,
-      50,    44,    45,    49,    47,    48,     1,    46,    49,    52,
+      49,    24,    25,    26,    27,    28,    49,    52,    31,    34,
+      44,    46,    44,    30,    37,    44,    49,    36,    41,    49,
+      31,    44,    45,    49,    47,    48,     1,    49,    46,    52,
        5,     6,     7,     8,     9,    10,    11,    49,    13,    14,
-      15,    16,    17,    18,    19,    20,    21,    22,    49,    24,
+      15,    16,    17,    18,    19,    20,    21,    22,    34,    24,
       25,    26,    27,    28,    49,    49,    31,    49,    49,    49,
-       1,    90,    37,    77,   155,   140,    41,   105,    -1,    44,
-      45,    -1,    47,    48,     1,   100,    -1,    52,     5,     6,
+      49,     1,    37,    90,   155,   105,    41,    77,   139,    44,
+      45,    -1,    47,    48,     1,    -1,   100,    52,     5,     6,
        7,     8,     9,    10,    11,    -1,    13,    14,    15,    16,
       17,    18,    19,    20,    21,    22,    -1,    24,    25,    26,
       27,    28,    -1,    -1,    31,    -1,    -1,    -1,    -1,    36,
@@ -855,9 +855,9 @@ static const yytype_uint8 yystos[] =
       46,    74,    30,    32,    97,    33,    47,    60,    44,    45,
       37,    41,    47,    52,    70,    76,    77,    91,    92,    93,
       94,    45,     1,    90,    74,    48,    49,    49,    49,    49,
-      73,    63,    31,    95,     1,    65,    78,    79,    80,    81,
-      94,     1,    37,    76,    34,    76,    95,    33,    47,    44,
-      46,    49,    44,    50,    85,    86,    49,    37,    41,    47,
+      73,    63,    95,     1,    65,    78,    79,    80,    81,    94,
+       1,    37,    76,    34,    76,    95,    33,    47,    44,    46,
+      49,    44,    31,    50,    85,    86,    49,    37,    41,    47,
       70,    82,    83,    49,    36,    46,    49,    49,     1,    78,
       93,    34,     1,    41,    82,    82,    33,    47,    36,    81,
       49,    49,    49,    49,     1,    78,    49,    49
diff --git a/scripts/genksyms/parse.y b/scripts/genksyms/parse.y
index 408cdf82b27..10d7dc724b6 100644
--- a/scripts/genksyms/parse.y
+++ b/scripts/genksyms/parse.y
@@ -446,7 +446,7 @@ member_bitfield_declarator:
 
 attribute_opt:
 	/* empty */					{ $$ = NULL; }
-	| ATTRIBUTE_PHRASE
+	| attribute_opt ATTRIBUTE_PHRASE
 	;
 
 asm_definition:
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 9fba838c706..36b5eedcdc7 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -596,7 +596,7 @@ int main(int ac, char **av)
 		break;
 	}
 
-	if (conf_get_changed() && conf_write(NULL)) {
+	if (conf_write(NULL)) {
 		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
 		exit(1);
 	}
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index 07597611cc5..df6a188b993 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -222,10 +222,8 @@ load:
 				continue;
 			if (def == S_DEF_USER) {
 				sym = sym_find(line + 9);
-				if (!sym) {
-					conf_warning("trying to assign nonexistent symbol %s", line + 9);
+				if (!sym)
 					break;
-				}
 			} else {
 				sym = sym_lookup(line + 9, 0);
 				if (sym->type == S_UNKNOWN)
@@ -261,10 +259,8 @@ load:
 			}
 			if (def == S_DEF_USER) {
 				sym = sym_find(line + 7);
-				if (!sym) {
-					conf_warning("trying to assign nonexistent symbol %s", line + 7);
+				if (!sym)
 					break;
-				}
 			} else {
 				sym = sym_lookup(line + 7, 0);
 				if (sym->type == S_UNKNOWN)
diff --git a/scripts/kconfig/lex.zconf.c_shipped b/scripts/kconfig/lex.zconf.c_shipped
index 6a61cee4a32..7342ce0a778 100644
--- a/scripts/kconfig/lex.zconf.c_shipped
+++ b/scripts/kconfig/lex.zconf.c_shipped
@@ -5,10 +5,29 @@
 
 /* A lexical scanner generated by flex */
 
+#define yy_create_buffer zconf_create_buffer
+#define yy_delete_buffer zconf_delete_buffer
+#define yy_flex_debug zconf_flex_debug
+#define yy_init_buffer zconf_init_buffer
+#define yy_flush_buffer zconf_flush_buffer
+#define yy_load_buffer_state zconf_load_buffer_state
+#define yy_switch_to_buffer zconf_switch_to_buffer
+#define yyin zconfin
+#define yyleng zconfleng
+#define yylex zconflex
+#define yylineno zconflineno
+#define yyout zconfout
+#define yyrestart zconfrestart
+#define yytext zconftext
+#define yywrap zconfwrap
+#define yyalloc zconfalloc
+#define yyrealloc zconfrealloc
+#define yyfree zconffree
+
 #define FLEX_SCANNER
 #define YY_FLEX_MAJOR_VERSION 2
 #define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 33
+#define YY_FLEX_SUBMINOR_VERSION 35
 #if YY_FLEX_SUBMINOR_VERSION > 0
 #define FLEX_BETA
 #endif
@@ -30,7 +49,7 @@
 
 /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
 
-#if __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
 
 /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
  * if you want the limit (max/min) macros for int types. 
@@ -53,7 +72,6 @@ typedef int flex_int32_t;
 typedef unsigned char flex_uint8_t; 
 typedef unsigned short int flex_uint16_t;
 typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
 
 /* Limits of integral types. */
 #ifndef INT8_MIN
@@ -84,6 +102,8 @@ typedef unsigned int flex_uint32_t;
 #define UINT32_MAX             (4294967295U)
 #endif
 
+#endif /* ! C99 */
+
 #endif /* ! FLEXINT_H */
 
 #ifdef __cplusplus
@@ -93,11 +113,12 @@ typedef unsigned int flex_uint32_t;
 
 #else	/* ! __cplusplus */
 
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
 
 #define YY_USE_CONST
 
-#endif	/* __STDC__ */
+#endif	/* defined (__STDC__) */
 #endif	/* ! __cplusplus */
 
 #ifdef YY_USE_CONST
@@ -177,14 +198,9 @@ extern FILE *zconfin, *zconfout;
 
 #define unput(c) yyunput( c, (yytext_ptr)  )
 
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-
 #ifndef YY_TYPEDEF_YY_SIZE_T
 #define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
 #endif
 
 #ifndef YY_STRUCT_YY_BUFFER_STATE
@@ -335,7 +351,7 @@ void zconffree (void *  );
 
 /* Begin user sect3 */
 
-#define zconfwrap() 1
+#define zconfwrap(n) 1
 #define YY_SKIP_YYWRAP
 
 typedef unsigned char YY_CHAR;
@@ -748,6 +764,7 @@ int zconf_flex_debug = 0;
 #define YY_MORE_ADJ 0
 #define YY_RESTORE_YY_MORE_OFFSET
 char *zconftext;
+#define YY_NO_INPUT 1
 
 /*
  * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
@@ -834,6 +851,35 @@ void alloc_string(const char *str, int size)
 
 static int yy_init_globals (void );
 
+/* Accessor methods to globals.
+   These are made visible to non-reentrant scanners for convenience. */
+
+int zconflex_destroy (void );
+
+int zconfget_debug (void );
+
+void zconfset_debug (int debug_flag  );
+
+YY_EXTRA_TYPE zconfget_extra (void );
+
+void zconfset_extra (YY_EXTRA_TYPE user_defined  );
+
+FILE *zconfget_in (void );
+
+void zconfset_in  (FILE * in_str  );
+
+FILE *zconfget_out (void );
+
+void zconfset_out  (FILE * out_str  );
+
+int zconfget_leng (void );
+
+char *zconfget_text (void );
+
+int zconfget_lineno (void );
+
+void zconfset_lineno (int line_number  );
+
 /* Macros after this point can all be overridden by user definitions in
  * section 1.
  */
@@ -876,7 +922,7 @@ static int input (void );
 /* This used to be an fputs(), but since the string might contain NUL's,
  * we now use fwrite().
  */
-#define ECHO (void) fwrite( zconftext, zconfleng, 1, zconfout )
+#define ECHO fwrite( zconftext, zconfleng, 1, zconfout )
 #endif
 
 /* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
@@ -1540,6 +1586,14 @@ static int yy_get_next_buffer (void)
 	else
 		ret_val = EOB_ACT_CONTINUE_SCAN;
 
+	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+		/* Extend the array by 50%, plus the number we really need. */
+		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
+		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+	}
+
 	(yy_n_chars) += number_to_move;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
@@ -1926,7 +1980,9 @@ static void zconfensure_buffer_stack (void)
 		(yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc
 								(num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
-		
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
+								  
 		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
 				
 		(yy_buffer_stack_max) = num_to_alloc;
@@ -1944,6 +2000,8 @@ static void zconfensure_buffer_stack (void)
 								((yy_buffer_stack),
 								num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
 
 		/* zero only the new slots.*/
 		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l
index 4cea5c85cd0..5164ef7ce49 100644
--- a/scripts/kconfig/zconf.l
+++ b/scripts/kconfig/zconf.l
@@ -1,5 +1,6 @@
 %option backup nostdinit noyywrap never-interactive full ecs
 %option 8bit backup nodefault perf-report perf-report
+%option noinput
 %x COMMAND HELP STRING PARAM
 %{
 /*
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index d8f77e26081..ff787e6ff8e 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1403,7 +1403,7 @@ sub dump_struct($$) {
 	my $members = $3;
 
 	# ignore embedded structs or unions
-	$members =~ s/{.*?}//g;
+	$members =~ s/{.*}//g;
 
 	# ignore members marked private:
 	$members =~ s/\/\*.*?private:.*?public:.*?\*\///gos;
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 4fa1f3ad251..4c9890ec252 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -344,14 +344,20 @@ static void do_pnp_device_entry(void *symval, unsigned long size,
 				struct module *mod)
 {
 	const unsigned long id_size = sizeof(struct pnp_device_id);
-	const struct pnp_device_id *id = symval;
+	const unsigned int count = (size / id_size)-1;
+	const struct pnp_device_id *devs = symval;
+	unsigned int i;
 
 	device_id_check(mod->name, "pnp", size, id_size, symval);
 
-	buf_printf(&mod->dev_table_buf,
-		   "MODULE_ALIAS(\"pnp:d%s*\");\n", id->id);
-	buf_printf(&mod->dev_table_buf,
-		   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id->id);
+	for (i = 0; i < count; i++) {
+		const char *id = (char *)devs[i].id;
+
+		buf_printf(&mod->dev_table_buf,
+			   "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+		buf_printf(&mod->dev_table_buf,
+			   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+	}
 }
 
 /* looks like: "pnp:dD" for every device of the card */
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 8f038e6d5f9..418cd7dbbc9 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1468,7 +1468,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
  * marked __initdata will be discarded when the module has been intialized.
  * Likewise for modules used built-in the sections marked __exit
  * are discarded because __exit marked function are supposed to be called
- * only when a moduel is unloaded which never happes for built-in modules.
+ * only when a module is unloaded which never happens for built-in modules.
  * The check_sec_ref() function traverses all relocation records
  * to find all references to a section that reference a section that will
  * be discarded and warns about it.
diff --git a/scripts/patch-kernel b/scripts/patch-kernel
index ece46ef0ba5..46a59cae3a0 100755
--- a/scripts/patch-kernel
+++ b/scripts/patch-kernel
@@ -213,6 +213,7 @@ fi
 if [ $stopvers != "default" ]; then
 	STOPSUBLEVEL=`echo $stopvers | cut -d. -f3`
 	STOPEXTRA=`echo $stopvers | cut -d. -f4`
+	STOPFULLVERSION=${stopvers%%.$STOPEXTRA}
 	#echo "#___STOPSUBLEVEL=/$STOPSUBLEVEL/, STOPEXTRA=/$STOPEXTRA/"
 else
 	STOPSUBLEVEL=9999
@@ -249,7 +250,7 @@ while :				# incrementing SUBLEVEL (s in v.p.s)
 do
     CURRENTFULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL"
     EXTRAVER=
-    if [ $stopvers = $CURRENTFULLVERSION ]; then
+    if [ $STOPFULLVERSION = $CURRENTFULLVERSION ]; then
         echo "Stopping at $CURRENTFULLVERSION base as requested."
         break
     fi
diff --git a/scripts/ver_linux b/scripts/ver_linux
index 7ac0e309be0..dbb3037f134 100755
--- a/scripts/ver_linux
+++ b/scripts/ver_linux
@@ -4,7 +4,6 @@
 # /bin /sbin /usr/bin /usr/sbin /usr/local/bin, but it may
 # differ on your system.
 #
-PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/sbin:$PATH
 echo 'If some fields are empty or look unusual you may have an old version.'
 echo 'Compare to the current minimal requirements in Documentation/Changes.'
 echo ' '
diff --git a/security/capability.c b/security/capability.c
index 63d10da515a..24587481903 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -811,7 +811,8 @@ struct security_operations default_security_ops = {
 
 void security_fixup_ops(struct security_operations *ops)
 {
-	set_to_cap_if_null(ops, ptrace);
+	set_to_cap_if_null(ops, ptrace_may_access);
+	set_to_cap_if_null(ops, ptrace_traceme);
 	set_to_cap_if_null(ops, capget);
 	set_to_cap_if_null(ops, capset_check);
 	set_to_cap_if_null(ops, capset_set);
diff --git a/security/commoncap.c b/security/commoncap.c
index 4afbece37a0..e4c4b3fc0c0 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -63,14 +63,24 @@ int cap_settime(struct timespec *ts, struct timezone *tz)
 	return 0;
 }
 
-int cap_ptrace (struct task_struct *parent, struct task_struct *child,
-		unsigned int mode)
+int cap_ptrace_may_access(struct task_struct *child, unsigned int mode)
 {
 	/* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */
-	if (!cap_issubset(child->cap_permitted, parent->cap_permitted) &&
-	    !__capable(parent, CAP_SYS_PTRACE))
-		return -EPERM;
-	return 0;
+	if (cap_issubset(child->cap_permitted, current->cap_permitted))
+		return 0;
+	if (capable(CAP_SYS_PTRACE))
+		return 0;
+	return -EPERM;
+}
+
+int cap_ptrace_traceme(struct task_struct *parent)
+{
+	/* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */
+	if (cap_issubset(current->cap_permitted, parent->cap_permitted))
+		return 0;
+	if (has_capability(parent, CAP_SYS_PTRACE))
+		return 0;
+	return -EPERM;
 }
 
 int cap_capget (struct task_struct *target, kernel_cap_t *effective,
@@ -534,7 +544,7 @@ int cap_task_post_setuid (uid_t old_ruid, uid_t old_euid, uid_t old_suid,
 static inline int cap_safe_nice(struct task_struct *p)
 {
 	if (!cap_issubset(p->cap_permitted, current->cap_permitted) &&
-	    !__capable(current, CAP_SYS_NICE))
+	    !capable(CAP_SYS_NICE))
 		return -EPERM;
 	return 0;
 }
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 7bd296cca04..46f23971f7e 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -508,12 +508,11 @@ int devcgroup_inode_permission(struct inode *inode, int mask)
 		return 0;
 	if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
 		return 0;
-	dev_cgroup = css_to_devcgroup(task_subsys_state(current,
-				devices_subsys_id));
-	if (!dev_cgroup)
-		return 0;
 
 	rcu_read_lock();
+
+	dev_cgroup = task_devcgroup(current);
+
 	list_for_each_entry_rcu(wh, &dev_cgroup->whitelist, list) {
 		if (wh->type & DEV_ALL)
 			goto acc_check;
@@ -533,6 +532,7 @@ acc_check:
 		rcu_read_unlock();
 		return 0;
 	}
+
 	rcu_read_unlock();
 
 	return -EPERM;
@@ -543,12 +543,10 @@ int devcgroup_inode_mknod(int mode, dev_t dev)
 	struct dev_cgroup *dev_cgroup;
 	struct dev_whitelist_item *wh;
 
-	dev_cgroup = css_to_devcgroup(task_subsys_state(current,
-				devices_subsys_id));
-	if (!dev_cgroup)
-		return 0;
-
 	rcu_read_lock();
+
+	dev_cgroup = task_devcgroup(current);
+
 	list_for_each_entry(wh, &dev_cgroup->whitelist, list) {
 		if (wh->type & DEV_ALL)
 			goto acc_check;
@@ -566,6 +564,8 @@ acc_check:
 		rcu_read_unlock();
 		return 0;
 	}
+
 	rcu_read_unlock();
+
 	return -EPERM;
 }
diff --git a/security/root_plug.c b/security/root_plug.c
index be0ebec2580..c3f68b5b372 100644
--- a/security/root_plug.c
+++ b/security/root_plug.c
@@ -72,7 +72,8 @@ static int rootplug_bprm_check_security (struct linux_binprm *bprm)
 
 static struct security_operations rootplug_security_ops = {
 	/* Use the capability functions for some of the hooks */
-	.ptrace =			cap_ptrace,
+	.ptrace_may_access =		cap_ptrace_may_access,
+	.ptrace_traceme =		cap_ptrace_traceme,
 	.capget =			cap_capget,
 	.capset_check =			cap_capset_check,
 	.capset_set =			cap_capset_set,
diff --git a/security/security.c b/security/security.c
index ff706872775..3a4b4f55b33 100644
--- a/security/security.c
+++ b/security/security.c
@@ -127,10 +127,14 @@ int register_security(struct security_operations *ops)
 
 /* Security operations */
 
-int security_ptrace(struct task_struct *parent, struct task_struct *child,
-		    unsigned int mode)
+int security_ptrace_may_access(struct task_struct *child, unsigned int mode)
 {
-	return security_ops->ptrace(parent, child, mode);
+	return security_ops->ptrace_may_access(child, mode);
+}
+
+int security_ptrace_traceme(struct task_struct *parent)
+{
+	return security_ops->ptrace_traceme(parent);
 }
 
 int security_capget(struct task_struct *target,
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 40d06c533f8..03fc6a81ae3 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -998,8 +998,12 @@ static int selinux_sb_show_options(struct seq_file *m, struct super_block *sb)
 	int rc;
 
 	rc = selinux_get_mnt_opts(sb, &opts);
-	if (rc)
+	if (rc) {
+		/* before policy load we may get EINVAL, don't show anything */
+		if (rc == -EINVAL)
+			rc = 0;
 		return rc;
+	}
 
 	selinux_write_opts(m, &opts);
 
@@ -1734,24 +1738,34 @@ static inline u32 file_to_av(struct file *file)
 
 /* Hook functions begin here. */
 
-static int selinux_ptrace(struct task_struct *parent,
-			  struct task_struct *child,
-			  unsigned int mode)
+static int selinux_ptrace_may_access(struct task_struct *child,
+				     unsigned int mode)
 {
 	int rc;
 
-	rc = secondary_ops->ptrace(parent, child, mode);
+	rc = secondary_ops->ptrace_may_access(child, mode);
 	if (rc)
 		return rc;
 
 	if (mode == PTRACE_MODE_READ) {
-		struct task_security_struct *tsec = parent->security;
+		struct task_security_struct *tsec = current->security;
 		struct task_security_struct *csec = child->security;
 		return avc_has_perm(tsec->sid, csec->sid,
 				    SECCLASS_FILE, FILE__READ, NULL);
 	}
 
-	return task_has_perm(parent, child, PROCESS__PTRACE);
+	return task_has_perm(current, child, PROCESS__PTRACE);
+}
+
+static int selinux_ptrace_traceme(struct task_struct *parent)
+{
+	int rc;
+
+	rc = secondary_ops->ptrace_traceme(parent);
+	if (rc)
+		return rc;
+
+	return task_has_perm(parent, current, PROCESS__PTRACE);
 }
 
 static int selinux_capget(struct task_struct *target, kernel_cap_t *effective,
@@ -5342,7 +5356,8 @@ static int selinux_key_getsecurity(struct key *key, char **_buffer)
 static struct security_operations selinux_ops = {
 	.name =				"selinux",
 
-	.ptrace =			selinux_ptrace,
+	.ptrace_may_access =		selinux_ptrace_may_access,
+	.ptrace_traceme =		selinux_ptrace_traceme,
 	.capget =			selinux_capget,
 	.capset_check =			selinux_capset_check,
 	.capset_set =			selinux_capset_set,
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index b52f923ce68..d11a8154500 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -811,11 +811,12 @@ static int string_to_context_struct(struct policydb *pol,
 	/* Check the validity of the new context. */
 	if (!policydb_context_isvalid(pol, ctx)) {
 		rc = -EINVAL;
-		context_destroy(ctx);
 		goto out;
 	}
 	rc = 0;
 out:
+	if (rc)
+		context_destroy(ctx);
 	return rc;
 }
 
@@ -868,8 +869,7 @@ static int security_context_to_sid_core(const char *scontext, u32 scontext_len,
 	} else if (rc)
 		goto out;
 	rc = sidtab_context_to_sid(&sidtab, &context, sid);
-	if (rc)
-		context_destroy(&context);
+	context_destroy(&context);
 out:
 	read_unlock(&policy_rwlock);
 	kfree(scontext2);
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 1b40e558f98..87d75417ea9 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -87,27 +87,46 @@ struct inode_smack *new_inode_smack(char *smack)
  */
 
 /**
- * smack_ptrace - Smack approval on ptrace
- * @ptp: parent task pointer
+ * smack_ptrace_may_access - Smack approval on PTRACE_ATTACH
  * @ctp: child task pointer
  *
  * Returns 0 if access is OK, an error code otherwise
  *
  * Do the capability checks, and require read and write.
  */
-static int smack_ptrace(struct task_struct *ptp, struct task_struct *ctp,
-			unsigned int mode)
+static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode)
 {
 	int rc;
 
-	rc = cap_ptrace(ptp, ctp, mode);
+	rc = cap_ptrace_may_access(ctp, mode);
 	if (rc != 0)
 		return rc;
 
-	rc = smk_access(ptp->security, ctp->security, MAY_READWRITE);
-	if (rc != 0 && __capable(ptp, CAP_MAC_OVERRIDE))
+	rc = smk_access(current->security, ctp->security, MAY_READWRITE);
+	if (rc != 0 && capable(CAP_MAC_OVERRIDE))
 		return 0;
+	return rc;
+}
+
+/**
+ * smack_ptrace_traceme - Smack approval on PTRACE_TRACEME
+ * @ptp: parent task pointer
+ *
+ * Returns 0 if access is OK, an error code otherwise
+ *
+ * Do the capability checks, and require read and write.
+ */
+static int smack_ptrace_traceme(struct task_struct *ptp)
+{
+	int rc;
+
+	rc = cap_ptrace_traceme(ptp);
+	if (rc != 0)
+		return rc;
 
+	rc = smk_access(ptp->security, current->security, MAY_READWRITE);
+	if (rc != 0 && has_capability(ptp, CAP_MAC_OVERRIDE))
+		return 0;
 	return rc;
 }
 
@@ -923,7 +942,7 @@ static int smack_file_send_sigiotask(struct task_struct *tsk,
 	 */
 	file = container_of(fown, struct file, f_owner);
 	rc = smk_access(file->f_security, tsk->security, MAY_WRITE);
-	if (rc != 0 && __capable(tsk, CAP_MAC_OVERRIDE))
+	if (rc != 0 && has_capability(tsk, CAP_MAC_OVERRIDE))
 		return 0;
 	return rc;
 }
@@ -1164,12 +1183,12 @@ static int smack_task_wait(struct task_struct *p)
 	 * account for the smack labels having gotten to
 	 * be different in the first place.
 	 *
-	 * This breaks the strict subjet/object access
+	 * This breaks the strict subject/object access
 	 * control ideal, taking the object's privilege
 	 * state into account in the decision as well as
 	 * the smack value.
 	 */
-	if (capable(CAP_MAC_OVERRIDE) || __capable(p, CAP_MAC_OVERRIDE))
+	if (capable(CAP_MAC_OVERRIDE) || has_capability(p, CAP_MAC_OVERRIDE))
 		return 0;
 
 	return rc;
@@ -2016,9 +2035,6 @@ static int smack_setprocattr(struct task_struct *p, char *name,
 {
 	char *newsmack;
 
-	if (!__capable(p, CAP_MAC_ADMIN))
-		return -EPERM;
-
 	/*
 	 * Changing another process' Smack value is too dangerous
 	 * and supports no sane use case.
@@ -2026,6 +2042,9 @@ static int smack_setprocattr(struct task_struct *p, char *name,
 	if (p != current)
 		return -EPERM;
 
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
 	if (value == NULL || size == 0 || size >= SMK_LABELLEN)
 		return -EINVAL;
 
@@ -2552,7 +2571,8 @@ static void smack_release_secctx(char *secdata, u32 seclen)
 struct security_operations smack_ops = {
 	.name =				"smack",
 
-	.ptrace = 			smack_ptrace,
+	.ptrace_may_access =		smack_ptrace_may_access,
+	.ptrace_traceme =		smack_ptrace_traceme,
 	.capget = 			cap_capget,
 	.capset_check = 		cap_capset_check,
 	.capset_set = 			cap_capset_set,
@@ -2729,4 +2749,3 @@ static __init int smack_init(void)
  * all processes and objects when they are created.
  */
 security_initcall(smack_init);
-
diff --git a/sound/Kconfig b/sound/Kconfig
index a37bee094eb..8ebf512ced6 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -91,6 +91,9 @@ endif # SOUND_PRIME
 
 endif # !M68K
 
+endif # SOUND
+
+# AC97_BUS is used from both sound and ucb1400
 config AC97_BUS
 	tristate
 	help
@@ -99,4 +102,3 @@ config AC97_BUS
 	  sound although they're sharing the AC97 bus. Concerned drivers
 	  should "select" this.
 
-endif # SOUND
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 5b3274b465e..199cca3366d 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -26,10 +26,10 @@
 
 #include <asm/irq.h>
 #include <linux/mutex.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 
diff --git a/sound/arm/pxa2xx-pcm.c b/sound/arm/pxa2xx-pcm.c
index 0ede9e4656a..381094aab23 100644
--- a/sound/arm/pxa2xx-pcm.c
+++ b/sound/arm/pxa2xx-pcm.c
@@ -21,8 +21,8 @@
 #include <sound/pcm_params.h>
 
 #include <asm/dma.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 
 #include "pxa2xx-pcm.h"
 
diff --git a/sound/arm/sa11xx-uda1341.c b/sound/arm/sa11xx-uda1341.c
index faeddf3eced..b9c51bf8cd7 100644
--- a/sound/arm/sa11xx-uda1341.c
+++ b/sound/arm/sa11xx-uda1341.c
@@ -71,8 +71,8 @@
 #include <linux/pm.h>
 #endif
 
-#include <asm/hardware.h>
-#include <asm/arch/h3600.h>
+#include <mach/hardware.h>
+#include <mach/h3600.h>
 #include <asm/mach-types.h>
 #include <asm/dma.h>
 
diff --git a/sound/core/seq/oss/seq_oss_synth.c b/sound/core/seq/oss/seq_oss_synth.c
index 558dadbf45f..e024e4588b8 100644
--- a/sound/core/seq/oss/seq_oss_synth.c
+++ b/sound/core/seq/oss/seq_oss_synth.c
@@ -604,6 +604,9 @@ snd_seq_oss_synth_make_info(struct seq_oss_devinfo *dp, int dev, struct synth_in
 {
 	struct seq_oss_synth *rec;
 
+	if (dev < 0 || dev >= dp->max_synthdev)
+		return -ENXIO;
+
 	if (dp->synths[dev].is_midi) {
 		struct midi_info minf;
 		snd_seq_oss_midi_make_info(dp, dp->synths[dev].midi_mapped, &minf);
diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c
index ee0741f9eb5..fbef38a9604 100644
--- a/sound/mips/au1x00.c
+++ b/sound/mips/au1x00.c
@@ -38,7 +38,6 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
diff --git a/sound/oss/vidc.c b/sound/oss/vidc.c
index bb4a0969f46..725fef0f59a 100644
--- a/sound/oss/vidc.c
+++ b/sound/oss/vidc.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/hardware/iomd.h>
diff --git a/sound/oss/vidc_fill.S b/sound/oss/vidc_fill.S
index 01ccc074cc1..bed34921d17 100644
--- a/sound/oss/vidc_fill.S
+++ b/sound/oss/vidc_fill.S
@@ -11,7 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 
 		.text
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
index 88490418f93..c47842fad65 100644
--- a/sound/oss/waveartist.c
+++ b/sound/oss/waveartist.c
@@ -47,7 +47,7 @@
 #include "waveartist.h"
 
 #ifdef CONFIG_ARM
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #endif
 
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index f7d95b224a9..31f52d3fc21 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -845,7 +845,7 @@ config SND_VIRTUOSO
 	select SND_OXYGEN_LIB
 	help
 	  Say Y here to include support for sound cards based on the
-	  Asus AV100/AV200 chips, i.e., Xonar D2, DX and D2X.
+	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-virtuoso.
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 2f8b28add27..6abe8a3bd36 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -249,11 +249,12 @@ static struct snd_ca0106_details ca0106_chip_details[] = {
 	   .name   = "MSI K8N Diamond MB [SB0438]",
 	   .gpio_type = 2,
 	   .i2c_adc = 1 } ,
-	 /* Another MSI K8N Diamond MB, which has apprently a different SSID */
+	 /* MSI K8N Diamond PLUS MB */
 	 { .serial = 0x10091102,
 	   .name   = "MSI K8N Diamond MB",
 	   .gpio_type = 2,
-	   .i2c_adc = 1 } ,
+	   .i2c_adc = 1,
+	   .spi_dac = 2 },
 	 /* Shuttle XPC SD31P which has an onboard Creative Labs
 	  * Sound Blaster Live! 24-bit EAX
 	  * high-definition 7.1 audio processor".
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index ef9f072b47f..1c53e337ecb 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -101,6 +101,7 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
 			 "{Intel, ICH8},"
 			 "{Intel, ICH9},"
 			 "{Intel, ICH10},"
+			 "{Intel, PCH},"
 			 "{Intel, SCH},"
 			 "{ATI, SB450},"
 			 "{ATI, SB600},"
@@ -277,6 +278,9 @@ enum {
 /* Defines for Nvidia HDA support */
 #define NVIDIA_HDA_TRANSREG_ADDR      0x4e
 #define NVIDIA_HDA_ENABLE_COHBITS     0x0f
+#define NVIDIA_HDA_ISTRM_COH          0x4d
+#define NVIDIA_HDA_OSTRM_COH          0x4c
+#define NVIDIA_HDA_ENABLE_COHBIT      0x01
 
 /* Defines for Intel SCH HDA snoop control */
 #define INTEL_SCH_HDA_DEVC      0x78
@@ -899,6 +903,12 @@ static void azx_init_pci(struct azx *chip)
 		update_pci_byte(chip->pci,
 				NVIDIA_HDA_TRANSREG_ADDR,
 				0x0f, NVIDIA_HDA_ENABLE_COHBITS);
+		update_pci_byte(chip->pci,
+				NVIDIA_HDA_ISTRM_COH,
+				0x01, NVIDIA_HDA_ENABLE_COHBIT);
+		update_pci_byte(chip->pci,
+				NVIDIA_HDA_OSTRM_COH,
+				0x01, NVIDIA_HDA_ENABLE_COHBIT);
 		break;
 	case AZX_DRIVER_SCH:
 		pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
@@ -2263,6 +2273,8 @@ static struct pci_device_id azx_ids[] = {
 	{ PCI_DEVICE(0x8086, 0x293f), .driver_data = AZX_DRIVER_ICH },
 	{ PCI_DEVICE(0x8086, 0x3a3e), .driver_data = AZX_DRIVER_ICH },
 	{ PCI_DEVICE(0x8086, 0x3a6e), .driver_data = AZX_DRIVER_ICH },
+	/* PCH */
+	{ PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_ICH },
 	/* SCH */
 	{ PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH },
 	/* ATI SB 450/600 */
@@ -2272,6 +2284,7 @@ static struct pci_device_id azx_ids[] = {
 	{ PCI_DEVICE(0x1002, 0x793b), .driver_data = AZX_DRIVER_ATIHDMI },
 	{ PCI_DEVICE(0x1002, 0x7919), .driver_data = AZX_DRIVER_ATIHDMI },
 	{ PCI_DEVICE(0x1002, 0x960f), .driver_data = AZX_DRIVER_ATIHDMI },
+	{ PCI_DEVICE(0x1002, 0x970f), .driver_data = AZX_DRIVER_ATIHDMI },
 	{ PCI_DEVICE(0x1002, 0xaa00), .driver_data = AZX_DRIVER_ATIHDMI },
 	{ PCI_DEVICE(0x1002, 0xaa08), .driver_data = AZX_DRIVER_ATIHDMI },
 	{ PCI_DEVICE(0x1002, 0xaa10), .driver_data = AZX_DRIVER_ATIHDMI },
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index add4e87e0b2..66025161bd6 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -952,7 +952,7 @@ do_sku:
 					    tmp | 0x2010);
 			break;
 		case 0x10ec0888:
-			alc888_coef_init(codec);
+			/*alc888_coef_init(codec);*/ /* called in alc_init() */
 			break;
 		case 0x10ec0267:
 		case 0x10ec0268:
@@ -2439,6 +2439,8 @@ static int alc_init(struct hda_codec *codec)
 	unsigned int i;
 
 	alc_fix_pll(codec);
+	if (codec->vendor_id == 0x10ec0888)
+		alc888_coef_init(codec);
 
 	for (i = 0; i < spec->num_init_verbs; i++)
 		snd_hda_sequence_write(codec, spec->init_verbs[i]);
@@ -6195,7 +6197,6 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG),
 	SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
 	SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG),
-	SND_PCI_QUIRK(0x106b, 0x00a0, "Apple iMac 24''", ALC885_IMAC24),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8  */
 	SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
@@ -6437,6 +6438,39 @@ static void alc882_auto_init_analog_input(struct hda_codec *codec)
 	}
 }
 
+static void alc882_auto_init_input_src(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	const struct hda_input_mux *imux = spec->input_mux;
+	int c;
+
+	for (c = 0; c < spec->num_adc_nids; c++) {
+		hda_nid_t conn_list[HDA_MAX_NUM_INPUTS];
+		hda_nid_t nid = spec->capsrc_nids[c];
+		int conns, mute, idx, item;
+
+		conns = snd_hda_get_connections(codec, nid, conn_list,
+						ARRAY_SIZE(conn_list));
+		if (conns < 0)
+			continue;
+		for (idx = 0; idx < conns; idx++) {
+			/* if the current connection is the selected one,
+			 * unmute it as default - otherwise mute it
+			 */
+			mute = AMP_IN_MUTE(idx);
+			for (item = 0; item < imux->num_items; item++) {
+				if (imux->items[item].index == idx) {
+					if (spec->cur_mux[c] == item)
+						mute = AMP_IN_UNMUTE(idx);
+					break;
+				}
+			}
+			snd_hda_codec_write(codec, nid, 0,
+					    AC_VERB_SET_AMP_GAIN_MUTE, mute);
+		}
+	}
+}
+
 /* add mic boosts if needed */
 static int alc_auto_add_mic_boost(struct hda_codec *codec)
 {
@@ -6491,6 +6525,7 @@ static void alc882_auto_init(struct hda_codec *codec)
 	alc882_auto_init_multi_out(codec);
 	alc882_auto_init_hp_out(codec);
 	alc882_auto_init_analog_input(codec);
+	alc882_auto_init_input_src(codec);
 	if (spec->unsol_event)
 		alc_sku_automute(codec);
 }
@@ -8285,6 +8320,8 @@ static void alc883_auto_init_analog_input(struct hda_codec *codec)
 	}
 }
 
+#define alc883_auto_init_input_src	alc882_auto_init_input_src
+
 /* almost identical with ALC880 parser... */
 static int alc883_parse_auto_config(struct hda_codec *codec)
 {
@@ -8315,6 +8352,7 @@ static void alc883_auto_init(struct hda_codec *codec)
 	alc883_auto_init_multi_out(codec);
 	alc883_auto_init_hp_out(codec);
 	alc883_auto_init_analog_input(codec);
+	alc883_auto_init_input_src(codec);
 	if (spec->unsol_event)
 		alc_sku_automute(codec);
 }
@@ -8389,8 +8427,6 @@ static int patch_alc883(struct hda_codec *codec)
 	codec->patch_ops = alc_patch_ops;
 	if (board_config == ALC883_AUTO)
 		spec->init_hook = alc883_auto_init;
-	else if (codec->vendor_id == 0x10ec0888)
-		spec->init_hook = alc888_coef_init;
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	if (!spec->loopback.amplist)
@@ -9663,6 +9699,7 @@ static int alc262_parse_auto_config(struct hda_codec *codec)
 #define alc262_auto_init_multi_out	alc882_auto_init_multi_out
 #define alc262_auto_init_hp_out		alc882_auto_init_hp_out
 #define alc262_auto_init_analog_input	alc882_auto_init_analog_input
+#define alc262_auto_init_input_src	alc882_auto_init_input_src
 
 
 /* init callback for auto-configuration model -- overriding the default init */
@@ -9672,6 +9709,7 @@ static void alc262_auto_init(struct hda_codec *codec)
 	alc262_auto_init_multi_out(codec);
 	alc262_auto_init_hp_out(codec);
 	alc262_auto_init_analog_input(codec);
+	alc262_auto_init_input_src(codec);
 	if (spec->unsol_event)
 		alc_sku_automute(codec);
 }
@@ -13330,6 +13368,8 @@ static void alc861vd_auto_init_analog_input(struct hda_codec *codec)
 	}
 }
 
+#define alc861vd_auto_init_input_src	alc882_auto_init_input_src
+
 #define alc861vd_idx_to_mixer_vol(nid)		((nid) + 0x02)
 #define alc861vd_idx_to_mixer_switch(nid)	((nid) + 0x0c)
 
@@ -13512,6 +13552,7 @@ static void alc861vd_auto_init(struct hda_codec *codec)
 	alc861vd_auto_init_multi_out(codec);
 	alc861vd_auto_init_hp_out(codec);
 	alc861vd_auto_init_analog_input(codec);
+	alc861vd_auto_init_input_src(codec);
 	if (spec->unsol_event)
 		alc_sku_automute(codec);
 }
@@ -14025,6 +14066,13 @@ static struct hda_verb alc662_auto_init_verbs[] = {
 	{ }
 };
 
+/* additional verbs for ALC663 */
+static struct hda_verb alc663_auto_init_verbs[] = {
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{ }
+};
+
 static struct hda_verb alc663_m51va_init_verbs[] = {
 	{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
@@ -14553,6 +14601,14 @@ static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
 	if (!pin)
 		return 0;
 
+	if (pin == 0x17) {
+		/* ALC663 has a mono output pin on 0x17 */
+		sprintf(name, "%s Playback Switch", pfx);
+		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+				  HDA_COMPOSE_AMP_VAL(pin, 2, 0, HDA_OUTPUT));
+		return err;
+	}
+
 	if (alc880_is_fixed_pin(pin)) {
 		nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
                 /* printk("DAC nid=%x\n",nid); */
@@ -14677,6 +14733,8 @@ static void alc662_auto_init_analog_input(struct hda_codec *codec)
 	}
 }
 
+#define alc662_auto_init_input_src	alc882_auto_init_input_src
+
 static int alc662_parse_auto_config(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -14721,6 +14779,14 @@ static int alc662_parse_auto_config(struct hda_codec *codec)
 	spec->input_mux = &spec->private_imux;
 	
 	spec->init_verbs[spec->num_init_verbs++] = alc662_auto_init_verbs;
+	if (codec->vendor_id == 0x10ec0663)
+		spec->init_verbs[spec->num_init_verbs++] =
+			alc663_auto_init_verbs;
+
+	err = alc_auto_add_mic_boost(codec);
+	if (err < 0)
+		return err;
+
 	spec->mixers[spec->num_mixers] = alc662_capture_mixer;
 	spec->num_mixers++;
 	return 1;
@@ -14733,6 +14799,7 @@ static void alc662_auto_init(struct hda_codec *codec)
 	alc662_auto_init_multi_out(codec);
 	alc662_auto_init_hp_out(codec);
 	alc662_auto_init_analog_input(codec);
+	alc662_auto_init_input_src(codec);
 	if (spec->unsol_event)
 		alc_sku_automute(codec);
 }
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 7fdafcb0015..ad994fcab72 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -560,8 +560,9 @@ static struct hda_verb dell_eq_core_init[] = {
 };
 
 static struct hda_verb dell_m6_core_init[] = {
-	/* set master volume and direct control */
-	{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
+	/* set master volume to max value without distortion
+	 * and direct control */
+	{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
 	/* setup audio connections */
 	{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
 	{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c
index 7442460583d..dad393ae040 100644
--- a/sound/pci/oxygen/hifier.c
+++ b/sound/pci/oxygen/hifier.c
@@ -17,6 +17,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/delay.h>
 #include <linux/pci.h>
 #include <sound/control.h>
 #include <sound/core.h>
@@ -107,6 +108,9 @@ static void set_ak4396_params(struct oxygen *chip,
 	else
 		value |= AK4396_DFS_QUAD;
 	data->ak4396_ctl2 = value;
+
+	msleep(1); /* wait for the new MCLK to become stable */
+
 	ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB);
 	ak4396_write(chip, AK4396_CONTROL_2, value);
 	ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c
index 7c8ae31eb46..c5829d30ef8 100644
--- a/sound/pci/oxygen/oxygen.c
+++ b/sound/pci/oxygen/oxygen.c
@@ -28,6 +28,7 @@
  * GPIO 1 -> DFS1 of AK5385
  */
 
+#include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/pci.h>
 #include <sound/ac97_codec.h>
@@ -213,6 +214,9 @@ static void set_ak4396_params(struct oxygen *chip,
 	else
 		value |= AK4396_DFS_QUAD;
 	data->ak4396_ctl2 = value;
+
+	msleep(1); /* wait for the new MCLK to become stable */
+
 	for (i = 0; i < 4; ++i) {
 		ak4396_write(chip, i,
 			     AK4396_CONTROL_1, AK4396_DIF_24_MSB);
diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index 6facac5aed9..05eb8994c14 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -512,9 +512,12 @@ static int ac97_switch_get(struct snd_kcontrol *ctl,
 
 static void mute_ac97_ctl(struct oxygen *chip, unsigned int control)
 {
-	unsigned int priv_idx = chip->controls[control]->private_value & 0xff;
+	unsigned int priv_idx;
 	u16 value;
 
+	if (!chip->controls[control])
+		return;
+	priv_idx = chip->controls[control]->private_value & 0xff;
 	value = oxygen_read_ac97(chip, 0, priv_idx);
 	if (!(value & 0x8000)) {
 		oxygen_write_ac97(chip, 0, priv_idx, value | 0x8000);
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 9a2c16bf94e..01d7b75f918 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -36,15 +36,15 @@
  */
 
 /*
- * Xonar DX
- * --------
+ * Xonar D1/DX
+ * -----------
  *
  * CMI8788:
  *
  * I²C <-> CS4398 (front)
  *     <-> CS4362A (surround, center/LFE, back)
  *
- * GPI 0 <- external power present
+ * GPI 0 <- external power present (DX only)
  *
  * GPIO 0 -> enable output to speakers
  * GPIO 1 -> enable front panel I/O
@@ -96,6 +96,7 @@ MODULE_PARM_DESC(enable, "enable card");
 enum {
 	MODEL_D2,
 	MODEL_D2X,
+	MODEL_D1,
 	MODEL_DX,
 };
 
@@ -103,6 +104,7 @@ static struct pci_device_id xonar_ids[] __devinitdata = {
 	{ OXYGEN_PCI_SUBID(0x1043, 0x8269), .driver_data = MODEL_D2 },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, xonar_ids);
@@ -313,15 +315,12 @@ static void cs43xx_init(struct oxygen *chip)
 	cs4362a_write(chip, 0x01, CS4362A_CPEN);
 }
 
-static void xonar_dx_init(struct oxygen *chip)
+static void xonar_d1_init(struct oxygen *chip)
 {
 	struct xonar_data *data = chip->model_data;
 
 	data->anti_pop_delay = 800;
 	data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
-	data->ext_power_reg = OXYGEN_GPI_DATA;
-	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
-	data->ext_power_bit = GPI_DX_EXT_POWER;
 	data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST;
 	data->cs4362a_fm = CS4362A_FM_SINGLE |
 		CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
@@ -345,6 +344,16 @@ static void xonar_dx_init(struct oxygen *chip)
 	snd_component_add(chip->card, "CS5361");
 }
 
+static void xonar_dx_init(struct oxygen *chip)
+{
+	struct xonar_data *data = chip->model_data;
+
+	data->ext_power_reg = OXYGEN_GPI_DATA;
+	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+	data->ext_power_bit = GPI_DX_EXT_POWER;
+	xonar_d1_init(chip);
+}
+
 static void xonar_cleanup(struct oxygen *chip)
 {
 	struct xonar_data *data = chip->model_data;
@@ -352,7 +361,7 @@ static void xonar_cleanup(struct oxygen *chip)
 	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit);
 }
 
-static void xonar_dx_cleanup(struct oxygen *chip)
+static void xonar_d1_cleanup(struct oxygen *chip)
 {
 	xonar_cleanup(chip);
 	cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN);
@@ -365,7 +374,7 @@ static void xonar_d2_resume(struct oxygen *chip)
 	xonar_enable_output(chip);
 }
 
-static void xonar_dx_resume(struct oxygen *chip)
+static void xonar_d1_resume(struct oxygen *chip)
 {
 	cs43xx_init(chip);
 	xonar_enable_output(chip);
@@ -513,7 +522,7 @@ static const struct snd_kcontrol_new front_panel_switch = {
 	.put = front_panel_put,
 };
 
-static void xonar_dx_ac97_switch(struct oxygen *chip,
+static void xonar_d1_ac97_switch(struct oxygen *chip,
 				 unsigned int reg, unsigned int mute)
 {
 	if (reg == AC97_LINE) {
@@ -536,7 +545,7 @@ static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
 	return 0;
 }
 
-static int xonar_dx_control_filter(struct snd_kcontrol_new *template)
+static int xonar_d1_control_filter(struct snd_kcontrol_new *template)
 {
 	if (!strncmp(template->name, "CD Capture ", 11))
 		return 1; /* no CD input */
@@ -548,7 +557,7 @@ static int xonar_mixer_init(struct oxygen *chip)
 	return snd_ctl_add(chip->card, snd_ctl_new1(&alt_switch, chip));
 }
 
-static int xonar_dx_mixer_init(struct oxygen *chip)
+static int xonar_d1_mixer_init(struct oxygen *chip)
 {
 	return snd_ctl_add(chip->card, snd_ctl_new1(&front_panel_switch, chip));
 }
@@ -615,23 +624,51 @@ static const struct oxygen_model xonar_models[] = {
 		.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
 		.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
 	},
+	[MODEL_D1] = {
+		.shortname = "Xonar D1",
+		.longname = "Asus Virtuoso 100",
+		.chip = "AV200",
+		.owner = THIS_MODULE,
+		.init = xonar_d1_init,
+		.control_filter = xonar_d1_control_filter,
+		.mixer_init = xonar_d1_mixer_init,
+		.cleanup = xonar_d1_cleanup,
+		.suspend = xonar_d1_cleanup,
+		.resume = xonar_d1_resume,
+		.set_dac_params = set_cs43xx_params,
+		.set_adc_params = set_cs53x1_params,
+		.update_dac_volume = update_cs43xx_volume,
+		.update_dac_mute = update_cs43xx_mute,
+		.ac97_switch = xonar_d1_ac97_switch,
+		.dac_tlv = cs4362a_db_scale,
+		.model_data_size = sizeof(struct xonar_data),
+		.pcm_dev_cfg = PLAYBACK_0_TO_I2S |
+			       PLAYBACK_1_TO_SPDIF |
+			       CAPTURE_0_FROM_I2S_2,
+		.dac_channels = 8,
+		.dac_volume_min = 0,
+		.dac_volume_max = 127,
+		.function_flags = OXYGEN_FUNCTION_2WIRE,
+		.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+		.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+	},
 	[MODEL_DX] = {
 		.shortname = "Xonar DX",
 		.longname = "Asus Virtuoso 100",
 		.chip = "AV200",
 		.owner = THIS_MODULE,
 		.init = xonar_dx_init,
-		.control_filter = xonar_dx_control_filter,
-		.mixer_init = xonar_dx_mixer_init,
-		.cleanup = xonar_dx_cleanup,
-		.suspend = xonar_dx_cleanup,
-		.resume = xonar_dx_resume,
+		.control_filter = xonar_d1_control_filter,
+		.mixer_init = xonar_d1_mixer_init,
+		.cleanup = xonar_d1_cleanup,
+		.suspend = xonar_d1_cleanup,
+		.resume = xonar_d1_resume,
 		.set_dac_params = set_cs43xx_params,
 		.set_adc_params = set_cs53x1_params,
 		.update_dac_volume = update_cs43xx_volume,
 		.update_dac_mute = update_cs43xx_mute,
 		.gpio_changed = xonar_gpio_changed,
-		.ac97_switch = xonar_dx_ac97_switch,
+		.ac97_switch = xonar_d1_ac97_switch,
 		.dac_tlv = cs4362a_db_scale,
 		.model_data_size = sizeof(struct xonar_data),
 		.pcm_dev_cfg = PLAYBACK_0_TO_I2S |
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
index 9ca11332614..54df8baf916 100644
--- a/sound/sh/aica.c
+++ b/sound/sh/aica.c
@@ -42,7 +42,7 @@
 #include <sound/info.h>
 #include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/dreamcast/sysasic.h>
+#include <mach/sysasic.h>
 #include "aica.h"
 
 MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
diff --git a/sound/soc/at32/playpaq_wm8510.c b/sound/soc/at32/playpaq_wm8510.c
index fee5f8e5895..3f326219f1e 100644
--- a/sound/soc/at32/playpaq_wm8510.c
+++ b/sound/soc/at32/playpaq_wm8510.c
@@ -36,8 +36,8 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/portmux.h>
 
 #include "../codecs/wm8510.h"
 #include "at32-pcm.h"
diff --git a/sound/soc/at91/at91-pcm.c b/sound/soc/at91/at91-pcm.c
index d47492b2b6e..7ab48bd25e4 100644
--- a/sound/soc/at91/at91-pcm.c
+++ b/sound/soc/at91/at91-pcm.c
@@ -28,8 +28,8 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_ssc.h>
+#include <mach/hardware.h>
+#include <mach/at91_ssc.h>
 
 #include "at91-pcm.h"
 
diff --git a/sound/soc/at91/at91-pcm.h b/sound/soc/at91/at91-pcm.h
index 58d0f00a07b..e5aada2cb10 100644
--- a/sound/soc/at91/at91-pcm.h
+++ b/sound/soc/at91/at91-pcm.h
@@ -19,7 +19,7 @@
 #ifndef _AT91_PCM_H
 #define _AT91_PCM_H
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 struct at91_ssc_periph {
 	void __iomem	*base;
diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c
index 090e607f869..5d44515e62e 100644
--- a/sound/soc/at91/at91-ssc.c
+++ b/sound/soc/at91/at91-ssc.c
@@ -28,9 +28,9 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_ssc.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_ssc.h>
 
 #include "at91-pcm.h"
 #include "at91-ssc.h"
diff --git a/sound/soc/at91/eti_b1_wm8731.c b/sound/soc/at91/eti_b1_wm8731.c
index d532de95424..b81d6b2cfa1 100644
--- a/sound/soc/at91/eti_b1_wm8731.c
+++ b/sound/soc/at91/eti_b1_wm8731.c
@@ -22,7 +22,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/timer.h>
@@ -33,8 +32,8 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
 
 #include "../codecs/wm8731.h"
 #include "at91-pcm.h"
diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c
index b26003c4f3e..7da9f467b7b 100644
--- a/sound/soc/codecs/ak4535.c
+++ b/sound/soc/codecs/ak4535.c
@@ -562,10 +562,9 @@ static int ak4535_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -583,7 +582,6 @@ static int ak4535_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -660,6 +658,11 @@ static int ak4535_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index b1dce5f459d..5f9abb19943 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1199,10 +1199,9 @@ static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -1221,7 +1220,6 @@ static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -1302,6 +1300,11 @@ static int aic3x_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c
index a52d6d9e007..807318fbdc8 100644
--- a/sound/soc/codecs/uda1380.c
+++ b/sound/soc/codecs/uda1380.c
@@ -729,10 +729,9 @@ static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -750,7 +749,6 @@ static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -817,6 +815,9 @@ static int uda1380_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0)
+		kfree(codec);
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 67325fd9544..3d998e6a997 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -693,10 +693,9 @@ static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -714,7 +713,6 @@ static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -782,6 +780,9 @@ static int wm8510_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0)
+		kfree(codec);
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 369d39c3f74..9402fcaf04f 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -596,10 +596,9 @@ static int wm8731_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -617,7 +616,6 @@ static int wm8731_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -693,6 +691,11 @@ static int wm8731_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index e23cb09f0d1..dd1f55404b2 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -348,8 +348,9 @@ static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("ROUT1"),
 	SND_SOC_DAPM_OUTPUT("LOUT2"),
 	SND_SOC_DAPM_OUTPUT("ROUT2"),
-	SND_SOC_DAPM_OUTPUT("MONO"),
+	SND_SOC_DAPM_OUTPUT("MONO1"),
 	SND_SOC_DAPM_OUTPUT("OUT3"),
+	SND_SOC_DAPM_OUTPUT("VREF"),
 
 	SND_SOC_DAPM_INPUT("LINPUT1"),
 	SND_SOC_DAPM_INPUT("LINPUT2"),
@@ -868,10 +869,9 @@ static int wm8750_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -889,7 +889,6 @@ static int wm8750_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -965,6 +964,10 @@ static int wm8750_probe(struct platform_device *pdev)
 		/* Add other interfaces here */
 #endif
 
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 8604809f0c3..5761164fe16 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -34,7 +34,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -1661,10 +1660,9 @@ static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c =  kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (!i2c) {
-		kfree(codec);
+	if (!i2c)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -1683,7 +1681,6 @@ static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -1760,6 +1757,11 @@ static int wm8753_probe(struct platform_device *pdev)
 #else
 		/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 3ecce5168e9..dd995ef448b 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -82,7 +82,7 @@ static const u16 wm8990_reg[] = {
 	0x0003,     /* R35 - ClassD1 */
 	0x0000,     /* R36 */
 	0x0100,     /* R37 - ClassD3 */
-	0x0000,     /* R38 */
+	0x0079,     /* R38 - ClassD4 */
 	0x0000,     /* R39 - Input Mixer1 */
 	0x0000,     /* R40 - Input Mixer2 */
 	0x0000,     /* R41 - Input Mixer3 */
@@ -311,11 +311,15 @@ SOC_SINGLE("Speaker Mode Switch", WM8990_CLASSD1,
 	WM8990_CDMODE_BIT, 1, 0),
 
 SOC_SINGLE("Speaker Output Attenuation Volume", WM8990_SPEAKER_VOLUME,
-	WM8990_SPKVOL_SHIFT, WM8990_SPKVOL_MASK, 0),
+	WM8990_SPKATTN_SHIFT, WM8990_SPKATTN_MASK, 0),
 SOC_SINGLE("Speaker DC Boost Volume", WM8990_CLASSD3,
 	WM8990_DCGAIN_SHIFT, WM8990_DCGAIN_MASK, 0),
 SOC_SINGLE("Speaker AC Boost Volume", WM8990_CLASSD3,
 	WM8990_ACGAIN_SHIFT, WM8990_ACGAIN_MASK, 0),
+SOC_SINGLE_TLV("Speaker Volume", WM8990_CLASSD4,
+	WM8990_SPKVOL_SHIFT, WM8990_SPKVOL_MASK, 0, out_pga_tlv),
+SOC_SINGLE("Speaker ZC Switch", WM8990_CLASSD4,
+	WM8990_SPKZC_SHIFT, WM8990_SPKZC_MASK, 0),
 
 SOC_WM899X_OUTPGA_SINGLE_R_TLV("Left DAC Digital Volume",
 	WM8990_LEFT_DAC_DIGITAL_VOLUME,
@@ -920,7 +924,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{"SPKMIX", "SPKMIX Left Mixer PGA Switch", "LOPGA"},
 	{"SPKMIX", "SPKMIX Right Mixer PGA Switch", "ROPGA"},
 	{"SPKMIX", "SPKMIX Right DAC Switch", "Right DAC"},
-	{"SPKMIX", "SPKMIX Left DAC Switch", "Right DAC"},
+	{"SPKMIX", "SPKMIX Left DAC Switch", "Left DAC"},
 
 	/* LONMIX */
 	{"LONMIX", "LONMIX Left Mixer PGA Switch", "LOPGA"},
@@ -1496,10 +1500,9 @@ static int wm8990_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c =  kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -1517,7 +1520,6 @@ static int wm8990_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -1591,6 +1593,11 @@ static int wm8990_probe(struct platform_device *pdev)
 #else
 		/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8990.h b/sound/soc/codecs/wm8990.h
index 6bea5748528..0a08325d544 100644
--- a/sound/soc/codecs/wm8990.h
+++ b/sound/soc/codecs/wm8990.h
@@ -54,6 +54,7 @@
 #define WM8990_SPEAKER_VOLUME                   0x22
 #define WM8990_CLASSD1                          0x23
 #define WM8990_CLASSD3                          0x25
+#define WM8990_CLASSD4                          0x26
 #define WM8990_INPUT_MIXER1                     0x27
 #define WM8990_INPUT_MIXER2                     0x28
 #define WM8990_INPUT_MIXER3                     0x29
@@ -528,8 +529,8 @@
 /*
  * R34 (0x22) - Speaker Volume
  */
-#define WM8990_SPKVOL_MASK                      0x0003  /* SPKVOL - [1:0] */
-#define WM8990_SPKVOL_SHIFT			0
+#define WM8990_SPKATTN_MASK                      0x0003  /* SPKATTN - [1:0] */
+#define WM8990_SPKATTN_SHIFT			 0
 
 /*
  * R35 (0x23) - ClassD1
@@ -544,6 +545,15 @@
 #define WM8990_DCGAIN_SHIFT			3
 #define WM8990_ACGAIN_MASK                      0x0007  /* ACGAIN - [2:0] */
 #define WM8990_ACGAIN_SHIFT			0
+
+/*
+ * R38 (0x26) - ClassD4
+ */
+#define WM8990_SPKZC_MASK                       0x0001  /* SPKZC */
+#define WM8990_SPKZC_SHIFT                           7  /* SPKZC */
+#define WM8990_SPKVOL_MASK                      0x007F  /* SPKVOL - [6:0] */
+#define WM8990_SPKVOL_SHIFT                          0  /* SPKVOL - [6:0] */
+
 /*
  * R39 (0x27) - Input Mixer1
  */
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 1fb7f9a7aec..2f1c91b1d55 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -13,7 +13,6 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <sound/core.h>
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 5e2c306399e..65fdbd81a37 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -19,9 +19,8 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <asm/mach-types.h>
 #include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include "../codecs/tlv320aic3x.h"
 #include "davinci-pcm.h"
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index da2bc590286..d2d3da9729f 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -132,12 +132,17 @@ struct fsl_dma_private {
  * Since each link descriptor has a 32-bit byte count field, we set
  * period_bytes_max to the largest 32-bit number.  We also have no maximum
  * number of periods.
+ *
+ * Note that we specify SNDRV_PCM_INFO_JOINT_DUPLEX here, but only because a
+ * limitation in the SSI driver requires the sample rates for playback and
+ * capture to be the same.
  */
 static const struct snd_pcm_hardware fsl_dma_hardware = {
 
 	.info   		= SNDRV_PCM_INFO_INTERLEAVED |
 				  SNDRV_PCM_INFO_MMAP |
-				  SNDRV_PCM_INFO_MMAP_VALID,
+				  SNDRV_PCM_INFO_MMAP_VALID |
+				  SNDRV_PCM_INFO_JOINT_DUPLEX,
 	.formats		= FSLDMA_PCM_FORMATS,
 	.rates  		= FSLDMA_PCM_RATES,
 	.rate_min       	= 5512,
@@ -322,14 +327,75 @@ static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai,
  * fsl_dma_open: open a new substream.
  *
  * Each substream has its own DMA buffer.
+ *
+ * ALSA divides the DMA buffer into N periods.  We create NUM_DMA_LINKS link
+ * descriptors that ping-pong from one period to the next.  For example, if
+ * there are six periods and two link descriptors, this is how they look
+ * before playback starts:
+ *
+ *      	   The last link descriptor
+ *   ____________  points back to the first
+ *  |   	 |
+ *  V   	 |
+ *  ___    ___   |
+ * |   |->|   |->|
+ * |___|  |___|
+ *   |      |
+ *   |      |
+ *   V      V
+ *  _________________________________________
+ * |      |      |      |      |      |      |  The DMA buffer is
+ * |      |      |      |      |      |      |    divided into 6 parts
+ * |______|______|______|______|______|______|
+ *
+ * and here's how they look after the first period is finished playing:
+ *
+ *   ____________
+ *  |   	 |
+ *  V   	 |
+ *  ___    ___   |
+ * |   |->|   |->|
+ * |___|  |___|
+ *   |      |
+ *   |______________
+ *          |       |
+ *          V       V
+ *  _________________________________________
+ * |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |
+ * |______|______|______|______|______|______|
+ *
+ * The first link descriptor now points to the third period.  The DMA
+ * controller is currently playing the second period.  When it finishes, it
+ * will jump back to the first descriptor and play the third period.
+ *
+ * There are four reasons we do this:
+ *
+ * 1. The only way to get the DMA controller to automatically restart the
+ *    transfer when it gets to the end of the buffer is to use chaining
+ *    mode.  Basic direct mode doesn't offer that feature.
+ * 2. We need to receive an interrupt at the end of every period.  The DMA
+ *    controller can generate an interrupt at the end of every link transfer
+ *    (aka segment).  Making each period into a DMA segment will give us the
+ *    interrupts we need.
+ * 3. By creating only two link descriptors, regardless of the number of
+ *    periods, we do not need to reallocate the link descriptors if the
+ *    number of periods changes.
+ * 4. All of the audio data is still stored in a single, contiguous DMA
+ *    buffer, which is what ALSA expects.  We're just dividing it into
+ *    contiguous parts, and creating a link descriptor for each one.
  */
 static int fsl_dma_open(struct snd_pcm_substream *substream)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct fsl_dma_private *dma_private;
+	struct ccsr_dma_channel __iomem *dma_channel;
 	dma_addr_t ld_buf_phys;
+	u64 temp_link;  	/* Pointer to next link descriptor */
+	u32 mr;
 	unsigned int channel;
 	int ret = 0;
+	unsigned int i;
 
 	/*
 	 * Reject any DMA buffer whose size is not a multiple of the period
@@ -390,68 +456,74 @@ static int fsl_dma_open(struct snd_pcm_substream *substream)
 	snd_soc_set_runtime_hwparams(substream, &fsl_dma_hardware);
 	runtime->private_data = dma_private;
 
+	/* Program the fixed DMA controller parameters */
+
+	dma_channel = dma_private->dma_channel;
+
+	temp_link = dma_private->ld_buf_phys +
+		sizeof(struct fsl_dma_link_descriptor);
+
+	for (i = 0; i < NUM_DMA_LINKS; i++) {
+		struct fsl_dma_link_descriptor *link = &dma_private->link[i];
+
+		link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP);
+		link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP);
+		link->next = cpu_to_be64(temp_link);
+
+		temp_link += sizeof(struct fsl_dma_link_descriptor);
+	}
+	/* The last link descriptor points to the first */
+	dma_private->link[i - 1].next = cpu_to_be64(dma_private->ld_buf_phys);
+
+	/* Tell the DMA controller where the first link descriptor is */
+	out_be32(&dma_channel->clndar,
+		CCSR_DMA_CLNDAR_ADDR(dma_private->ld_buf_phys));
+	out_be32(&dma_channel->eclndar,
+		CCSR_DMA_ECLNDAR_ADDR(dma_private->ld_buf_phys));
+
+	/* The manual says the BCR must be clear before enabling EMP */
+	out_be32(&dma_channel->bcr, 0);
+
+	/*
+	 * Program the mode register for interrupts, external master control,
+	 * and source/destination hold.  Also clear the Channel Abort bit.
+	 */
+	mr = in_be32(&dma_channel->mr) &
+		~(CCSR_DMA_MR_CA | CCSR_DMA_MR_DAHE | CCSR_DMA_MR_SAHE);
+
+	/*
+	 * We want External Master Start and External Master Pause enabled,
+	 * because the SSI is controlling the DMA controller.  We want the DMA
+	 * controller to be set up in advance, and then we signal only the SSI
+	 * to start transferring.
+	 *
+	 * We want End-Of-Segment Interrupts enabled, because this will generate
+	 * an interrupt at the end of each segment (each link descriptor
+	 * represents one segment).  Each DMA segment is the same thing as an
+	 * ALSA period, so this is how we get an interrupt at the end of every
+	 * period.
+	 *
+	 * We want Error Interrupt enabled, so that we can get an error if
+	 * the DMA controller is mis-programmed somehow.
+	 */
+	mr |= CCSR_DMA_MR_EOSIE | CCSR_DMA_MR_EIE | CCSR_DMA_MR_EMP_EN |
+		CCSR_DMA_MR_EMS_EN;
+
+	/* For playback, we want the destination address to be held.  For
+	   capture, set the source address to be held. */
+	mr |= (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+		CCSR_DMA_MR_DAHE : CCSR_DMA_MR_SAHE;
+
+	out_be32(&dma_channel->mr, mr);
+
 	return 0;
 }
 
 /**
- * fsl_dma_hw_params: allocate the DMA buffer and the DMA link descriptors.
+ * fsl_dma_hw_params: continue initializing the DMA links
  *
- * ALSA divides the DMA buffer into N periods.  We create NUM_DMA_LINKS link
- * descriptors that ping-pong from one period to the next.  For example, if
- * there are six periods and two link descriptors, this is how they look
- * before playback starts:
- *
- *      	   The last link descriptor
- *   ____________  points back to the first
- *  |   	 |
- *  V   	 |
- *  ___    ___   |
- * |   |->|   |->|
- * |___|  |___|
- *   |      |
- *   |      |
- *   V      V
- *  _________________________________________
- * |      |      |      |      |      |      |  The DMA buffer is
- * |      |      |      |      |      |      |    divided into 6 parts
- * |______|______|______|______|______|______|
- *
- * and here's how they look after the first period is finished playing:
- *
- *   ____________
- *  |   	 |
- *  V   	 |
- *  ___    ___   |
- * |   |->|   |->|
- * |___|  |___|
- *   |      |
- *   |______________
- *          |       |
- *          V       V
- *  _________________________________________
- * |      |      |      |      |      |      |
- * |      |      |      |      |      |      |
- * |______|______|______|______|______|______|
- *
- * The first link descriptor now points to the third period.  The DMA
- * controller is currently playing the second period.  When it finishes, it
- * will jump back to the first descriptor and play the third period.
- *
- * There are four reasons we do this:
- *
- * 1. The only way to get the DMA controller to automatically restart the
- *    transfer when it gets to the end of the buffer is to use chaining
- *    mode.  Basic direct mode doesn't offer that feature.
- * 2. We need to receive an interrupt at the end of every period.  The DMA
- *    controller can generate an interrupt at the end of every link transfer
- *    (aka segment).  Making each period into a DMA segment will give us the
- *    interrupts we need.
- * 3. By creating only two link descriptors, regardless of the number of
- *    periods, we do not need to reallocate the link descriptors if the
- *    number of periods changes.
- * 4. All of the audio data is still stored in a single, contiguous DMA
- *    buffer, which is what ALSA expects.  We're just dividing it into
- *    contiguous parts, and creating a link descriptor for each one.
+ * This function obtains hardware parameters about the opened stream and
+ * programs the DMA controller accordingly.
  *
  * Note that due to a quirk of the SSI's STX register, the target address
  * for the DMA operations depends on the sample size.  So we don't program
@@ -463,11 +535,8 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct fsl_dma_private *dma_private = runtime->private_data;
-	struct ccsr_dma_channel __iomem *dma_channel = dma_private->dma_channel;
 
 	dma_addr_t temp_addr;   /* Pointer to next period */
-	u64 temp_link;  	/* Pointer to next link descriptor */
-	u32 mr; 		/* Temporary variable for MR register */
 
 	unsigned int i;
 
@@ -485,8 +554,6 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream,
 		dma_private->dma_buf_next = dma_private->dma_buf_phys;
 
 	/*
-	 * Initialize each link descriptor.
-	 *
 	 * The actual address in STX0 (destination for playback, source for
 	 * capture) is based on the sample size, but we don't know the sample
 	 * size in this function, so we'll have to adjust that later.  See
@@ -502,16 +569,11 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream,
 	 * buffer itself.
 	 */
 	temp_addr = substream->dma_buffer.addr;
-	temp_link = dma_private->ld_buf_phys +
-		sizeof(struct fsl_dma_link_descriptor);
 
 	for (i = 0; i < NUM_DMA_LINKS; i++) {
 		struct fsl_dma_link_descriptor *link = &dma_private->link[i];
 
 		link->count = cpu_to_be32(period_size);
-		link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP);
-		link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP);
-		link->next = cpu_to_be64(temp_link);
 
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 			link->source_addr = cpu_to_be32(temp_addr);
@@ -519,51 +581,7 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream,
 			link->dest_addr = cpu_to_be32(temp_addr);
 
 		temp_addr += period_size;
-		temp_link += sizeof(struct fsl_dma_link_descriptor);
 	}
-	/* The last link descriptor points to the first */
-	dma_private->link[i - 1].next = cpu_to_be64(dma_private->ld_buf_phys);
-
-	/* Tell the DMA controller where the first link descriptor is */
-	out_be32(&dma_channel->clndar,
-		CCSR_DMA_CLNDAR_ADDR(dma_private->ld_buf_phys));
-	out_be32(&dma_channel->eclndar,
-		CCSR_DMA_ECLNDAR_ADDR(dma_private->ld_buf_phys));
-
-	/* The manual says the BCR must be clear before enabling EMP */
-	out_be32(&dma_channel->bcr, 0);
-
-	/*
-	 * Program the mode register for interrupts, external master control,
-	 * and source/destination hold.  Also clear the Channel Abort bit.
-	 */
-	mr = in_be32(&dma_channel->mr) &
-		~(CCSR_DMA_MR_CA | CCSR_DMA_MR_DAHE | CCSR_DMA_MR_SAHE);
-
-	/*
-	 * We want External Master Start and External Master Pause enabled,
-	 * because the SSI is controlling the DMA controller.  We want the DMA
-	 * controller to be set up in advance, and then we signal only the SSI
-	 * to start transfering.
-	 *
-	 * We want End-Of-Segment Interrupts enabled, because this will generate
-	 * an interrupt at the end of each segment (each link descriptor
-	 * represents one segment).  Each DMA segment is the same thing as an
-	 * ALSA period, so this is how we get an interrupt at the end of every
-	 * period.
-	 *
-	 * We want Error Interrupt enabled, so that we can get an error if
-	 * the DMA controller is mis-programmed somehow.
-	 */
-	mr |= CCSR_DMA_MR_EOSIE | CCSR_DMA_MR_EIE | CCSR_DMA_MR_EMP_EN |
-		CCSR_DMA_MR_EMS_EN;
-
-	/* For playback, we want the destination address to be held.  For
-	   capture, set the source address to be held. */
-	mr |= (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
-		CCSR_DMA_MR_DAHE : CCSR_DMA_MR_SAHE;
-
-	out_be32(&dma_channel->mr, mr);
 
 	return 0;
 }
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 71bff33f552..157a7895ffa 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -67,6 +67,8 @@
  * @ssi: pointer to the SSI's registers
  * @ssi_phys: physical address of the SSI registers
  * @irq: IRQ of this SSI
+ * @first_stream: pointer to the stream that was opened first
+ * @second_stream: pointer to second stream
  * @dev: struct device pointer
  * @playback: the number of playback streams opened
  * @capture: the number of capture streams opened
@@ -79,6 +81,8 @@ struct fsl_ssi_private {
 	struct ccsr_ssi __iomem *ssi;
 	dma_addr_t ssi_phys;
 	unsigned int irq;
+	struct snd_pcm_substream *first_stream;
+	struct snd_pcm_substream *second_stream;
 	struct device *dev;
 	unsigned int playback;
 	unsigned int capture;
@@ -342,6 +346,49 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream)
 		 */
 	}
 
+	if (!ssi_private->first_stream)
+		ssi_private->first_stream = substream;
+	else {
+		/* This is the second stream open, so we need to impose sample
+		 * rate and maybe sample size constraints.  Note that this can
+		 * cause a race condition if the second stream is opened before
+		 * the first stream is fully initialized.
+		 *
+		 * We provide some protection by checking to make sure the first
+		 * stream is initialized, but it's not perfect.  ALSA sometimes
+		 * re-initializes the driver with a different sample rate or
+		 * size.  If the second stream is opened before the first stream
+		 * has received its final parameters, then the second stream may
+		 * be constrained to the wrong sample rate or size.
+		 *
+		 * FIXME: This code does not handle opening and closing streams
+		 * repeatedly.  If you open two streams and then close the first
+		 * one, you may not be able to open another stream until you
+		 * close the second one as well.
+		 */
+		struct snd_pcm_runtime *first_runtime =
+			ssi_private->first_stream->runtime;
+
+		if (!first_runtime->rate || !first_runtime->sample_bits) {
+			dev_err(substream->pcm->card->dev,
+				"set sample rate and size in %s stream first\n",
+				substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+				? "capture" : "playback");
+			return -EAGAIN;
+		}
+
+		snd_pcm_hw_constraint_minmax(substream->runtime,
+			SNDRV_PCM_HW_PARAM_RATE,
+			first_runtime->rate, first_runtime->rate);
+
+		snd_pcm_hw_constraint_minmax(substream->runtime,
+			SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+			first_runtime->sample_bits,
+			first_runtime->sample_bits);
+
+		ssi_private->second_stream = substream;
+	}
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		ssi_private->playback++;
 
@@ -371,18 +418,16 @@ static int fsl_ssi_prepare(struct snd_pcm_substream *substream)
 	struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data;
 
 	struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
-	u32 wl;
 
-	wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format));
+	if (substream == ssi_private->first_stream) {
+		u32 wl;
 
-	clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+		/* The SSI should always be disabled at this points (SSIEN=0) */
+		wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format));
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		/* In synchronous mode, the SSI uses STCCR for capture */
 		clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl);
-	else
-		clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
-
-	setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+	}
 
 	return 0;
 }
@@ -407,9 +452,13 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			setbits32(&ssi->scr, CCSR_SSI_SCR_TE);
+			clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+			setbits32(&ssi->scr,
+				CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE);
 		} else {
-			setbits32(&ssi->scr, CCSR_SSI_SCR_RE);
+			clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+			setbits32(&ssi->scr,
+				CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE);
 
 			/*
 			 * I think we need this delay to allow time for the SSI
@@ -452,6 +501,11 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream)
 	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
 		ssi_private->capture--;
 
+	if (ssi_private->first_stream == substream)
+		ssi_private->first_stream = ssi_private->second_stream;
+
+	ssi_private->second_stream = NULL;
+
 	/*
 	 * If this is the last active substream, disable the SSI and release
 	 * the IRQ.
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 02cec96859b..87d0ed01f65 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -29,9 +29,9 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <linux/gpio.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
@@ -329,12 +329,14 @@ static int __init n810_soc_init(void)
 	sys_clkout2_src = clk_get(dev, "sys_clkout2_src");
 	if (IS_ERR(sys_clkout2_src)) {
 		dev_err(dev, "Could not get sys_clkout2_src clock\n");
-		return -ENODEV;
+		err = PTR_ERR(sys_clkout2_src);
+		goto err2;
 	}
 	sys_clkout2 = clk_get(dev, "sys_clkout2");
 	if (IS_ERR(sys_clkout2)) {
 		dev_err(dev, "Could not get sys_clkout2\n");
-		goto err1;
+		err = PTR_ERR(sys_clkout2);
+		goto err3;
 	}
 	/*
 	 * Configure 12 MHz output on SYS_CLKOUT2. Therefore we must use
@@ -343,7 +345,8 @@ static int __init n810_soc_init(void)
 	func96m_clk = clk_get(dev, "func_96m_ck");
 	if (IS_ERR(func96m_clk)) {
 		dev_err(dev, "Could not get func 96M clock\n");
-		goto err2;
+		err = PTR_ERR(func96m_clk);
+		goto err4;
 	}
 	clk_set_parent(sys_clkout2_src, func96m_clk);
 	clk_set_rate(sys_clkout2, 12000000);
@@ -356,20 +359,25 @@ static int __init n810_soc_init(void)
 	gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0);
 
 	return 0;
-err2:
+err4:
 	clk_put(sys_clkout2);
+err3:
+	clk_put(sys_clkout2_src);
+err2:
 	platform_device_del(n810_snd_device);
 err1:
 	platform_device_put(n810_snd_device);
 
 	return err;
-
 }
 
 static void __exit n810_soc_exit(void)
 {
 	gpio_free(N810_SPEAKER_AMP_GPIO);
 	gpio_free(N810_HEADSET_AMP_GPIO);
+	clk_put(sys_clkout2_src);
+	clk_put(sys_clkout2);
+	clk_put(func96m_clk);
 
 	platform_device_unregister(n810_snd_device);
 }
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 00b0c9d73cd..35310e16d7f 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -30,9 +30,9 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/control.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
 
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index e092f3d836d..690bfeaec4a 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -27,7 +27,7 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include "omap-pcm.h"
 
 static const struct snd_pcm_hardware omap_pcm_hardware = {
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index c0294464a23..0a53f72077f 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -25,10 +25,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/corgi.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm8731.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index 06e8afb2527..6781c5be242 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -21,9 +21,9 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index 02dcac39cdf..d9c3f7b28be 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -30,9 +30,9 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index 65a4e9a8c39..a4697f7e292 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -26,10 +26,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/locomo.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/poodle.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm8731.h"
 #include "pxa2xx-pcm.h"
@@ -85,17 +85,13 @@ static int poodle_startup(struct snd_pcm_substream *substream)
 }
 
 /* we need to unmute the HP at shutdown as the mute burns power on poodle */
-static int poodle_shutdown(struct snd_pcm_substream *substream)
+static void poodle_shutdown(struct snd_pcm_substream *substream)
 {
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_codec *codec = rtd->socdev->codec;
-
 	/* set = unmute headphone */
 	locomo_gpio_write(&poodle_locomo_device.dev,
 		POODLE_LOCOMO_GPIO_MUTE_L, 1);
 	locomo_gpio_write(&poodle_locomo_device.dev,
 		POODLE_LOCOMO_GPIO_MUTE_R, 1);
-	return 0;
 }
 
 static int poodle_hw_params(struct snd_pcm_substream *substream,
@@ -232,7 +228,7 @@ static const struct soc_enum poodle_enum[] = {
 	SOC_ENUM_SINGLE_EXT(2, spk_function),
 };
 
-static const snd_kcontrol_new_t wm8731_poodle_controls[] = {
+static const struct snd_kcontrol_new wm8731_poodle_controls[] = {
 	SOC_ENUM_EXT("Jack Function", poodle_enum[0], poodle_get_jack,
 		poodle_set_jack),
 	SOC_ENUM_EXT("Speaker Function", poodle_enum[1], poodle_get_spk,
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 059af815ea0..d94a495bd6b 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -26,10 +26,10 @@
 
 #include <asm/irq.h>
 #include <linux/mutex.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-ac97.h"
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 8f96d87f7b4..c796b188277 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -16,15 +16,16 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/platform_device.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-i2s.h"
@@ -81,7 +82,6 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 
-	clk_i2s = clk_get(NULL, "I2SCLK");
 	if (IS_ERR(clk_i2s))
 		return PTR_ERR(clk_i2s);
 
@@ -152,6 +152,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx);
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm);
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk);
+	BUG_ON(IS_ERR(clk_i2s));
 	clk_enable(clk_i2s);
 	pxa_i2s_wait();
 
@@ -317,6 +318,43 @@ struct snd_soc_dai pxa_i2s_dai = {
 
 EXPORT_SYMBOL_GPL(pxa_i2s_dai);
 
+static int pxa2xx_i2s_probe(struct platform_device *dev)
+{
+	clk_i2s = clk_get(&dev->dev, "I2SCLK");
+	return IS_ERR(clk_i2s) ? PTR_ERR(clk_i2s) : 0;
+}
+
+static int __devexit pxa2xx_i2s_remove(struct platform_device *dev)
+{
+	clk_put(clk_i2s);
+	clk_i2s = ERR_PTR(-ENOENT);
+	return 0;
+}
+
+static struct platform_driver pxa2xx_i2s_driver = {
+	.probe = pxa2xx_i2s_probe,
+	.remove = __devexit_p(pxa2xx_i2s_remove),
+
+	.driver = {
+		.name = "pxa2xx-i2s",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init pxa2xx_i2s_init(void)
+{
+	clk_i2s = ERR_PTR(-ENOENT);
+	return platform_driver_register(&pxa2xx_i2s_driver);
+}
+
+static void __exit pxa2xx_i2s_exit(void)
+{
+	platform_driver_unregister(&pxa2xx_i2s_driver);
+}
+
+module_init(pxa2xx_i2s_init);
+module_exit(pxa2xx_i2s_exit);
+
 /* Module information */
 MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com, www.wolfsonmicro.com");
 MODULE_DESCRIPTION("pxa2xx I2S SoC Interface");
diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c
index 2df03ee5819..4345f387fe4 100644
--- a/sound/soc/pxa/pxa2xx-pcm.c
+++ b/sound/soc/pxa/pxa2xx-pcm.c
@@ -22,9 +22,9 @@
 #include <sound/soc.h>
 
 #include <asm/dma.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 64385797da5..37cb768fc93 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -26,10 +26,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
 #include "../codecs/wm8750.h"
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-i2s.h"
@@ -297,7 +297,7 @@ static int spitz_wm8750_init(struct snd_soc_codec *codec)
 	snd_soc_dapm_disable_pin(codec, "LINPUT3");
 	snd_soc_dapm_disable_pin(codec, "RINPUT3");
 	snd_soc_dapm_disable_pin(codec, "OUT3");
-	snd_soc_dapm_disable_pin(codec, "MONO");
+	snd_soc_dapm_disable_pin(codec, "MONO1");
 
 	/* Add spitz specific controls */
 	for (i = 0; i < ARRAY_SIZE(wm8750_spitz_controls); i++) {
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index fe6cca9c9e7..2baaa750f12 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -29,11 +29,10 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/tosa.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 4d7a9aa15f1..8089f8ee05c 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -24,14 +24,13 @@
 #include <sound/soc-dapm.h>
 #include <sound/tlv.h>
 
-#include <asm/mach-types.h>
 #include <asm/hardware/scoop.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 #include <linux/io.h>
-#include <asm/arch/spi-gpio.h>
+#include <mach/spi-gpio.h>
 
 #include <asm/plat-s3c24xx/regs-iis.h>
 
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index ee4676ed128..ded7d995a92 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -28,16 +28,16 @@
 #include <sound/pcm_params.h>
 #include <sound/initval.h>
 #include <sound/soc.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <linux/io.h>
 #include <asm/dma.h>
 
 #include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/dma.h>
+#include <mach/regs-gpio.h>
+#include <mach/audio.h>
+#include <mach/dma.h>
 
 #include "s3c24xx-pcm.h"
 #include "s3c2412-i2s.h"
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index 783349b7fed..19c5c3cf5d8 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -27,13 +27,13 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/audio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/audio.h>
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include "s3c24xx-pcm.h"
 #include "s3c24xx-ac97.h"
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index 397524282b5..ba4476b55fb 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -27,12 +27,12 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/audio.h>
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/regs-iis.h>
 
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index cef79b34dc6..e13e614bada 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -27,9 +27,9 @@
 #include <sound/soc.h>
 
 #include <asm/dma.h>
-#include <asm/hardware.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/audio.h>
 
 #include "s3c24xx-pcm.h"
 
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 820347c9ae4..f9d100bc847 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -470,6 +470,7 @@ int dapm_reg_event(struct snd_soc_dapm_widget *w,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(dapm_reg_event);
 
 /*
  * Scan each dapm widget for complete audio path.
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index a845890b680..7dd9b0b85e4 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -192,6 +192,123 @@ void kvm_vcpu_uninit(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_vcpu_uninit);
 
+#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
+static inline struct kvm *mmu_notifier_to_kvm(struct mmu_notifier *mn)
+{
+	return container_of(mn, struct kvm, mmu_notifier);
+}
+
+static void kvm_mmu_notifier_invalidate_page(struct mmu_notifier *mn,
+					     struct mm_struct *mm,
+					     unsigned long address)
+{
+	struct kvm *kvm = mmu_notifier_to_kvm(mn);
+	int need_tlb_flush;
+
+	/*
+	 * When ->invalidate_page runs, the linux pte has been zapped
+	 * already but the page is still allocated until
+	 * ->invalidate_page returns. So if we increase the sequence
+	 * here the kvm page fault will notice if the spte can't be
+	 * established because the page is going to be freed. If
+	 * instead the kvm page fault establishes the spte before
+	 * ->invalidate_page runs, kvm_unmap_hva will release it
+	 * before returning.
+	 *
+	 * The sequence increase only need to be seen at spin_unlock
+	 * time, and not at spin_lock time.
+	 *
+	 * Increasing the sequence after the spin_unlock would be
+	 * unsafe because the kvm page fault could then establish the
+	 * pte after kvm_unmap_hva returned, without noticing the page
+	 * is going to be freed.
+	 */
+	spin_lock(&kvm->mmu_lock);
+	kvm->mmu_notifier_seq++;
+	need_tlb_flush = kvm_unmap_hva(kvm, address);
+	spin_unlock(&kvm->mmu_lock);
+
+	/* we've to flush the tlb before the pages can be freed */
+	if (need_tlb_flush)
+		kvm_flush_remote_tlbs(kvm);
+
+}
+
+static void kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn,
+						    struct mm_struct *mm,
+						    unsigned long start,
+						    unsigned long end)
+{
+	struct kvm *kvm = mmu_notifier_to_kvm(mn);
+	int need_tlb_flush = 0;
+
+	spin_lock(&kvm->mmu_lock);
+	/*
+	 * The count increase must become visible at unlock time as no
+	 * spte can be established without taking the mmu_lock and
+	 * count is also read inside the mmu_lock critical section.
+	 */
+	kvm->mmu_notifier_count++;
+	for (; start < end; start += PAGE_SIZE)
+		need_tlb_flush |= kvm_unmap_hva(kvm, start);
+	spin_unlock(&kvm->mmu_lock);
+
+	/* we've to flush the tlb before the pages can be freed */
+	if (need_tlb_flush)
+		kvm_flush_remote_tlbs(kvm);
+}
+
+static void kvm_mmu_notifier_invalidate_range_end(struct mmu_notifier *mn,
+						  struct mm_struct *mm,
+						  unsigned long start,
+						  unsigned long end)
+{
+	struct kvm *kvm = mmu_notifier_to_kvm(mn);
+
+	spin_lock(&kvm->mmu_lock);
+	/*
+	 * This sequence increase will notify the kvm page fault that
+	 * the page that is going to be mapped in the spte could have
+	 * been freed.
+	 */
+	kvm->mmu_notifier_seq++;
+	/*
+	 * The above sequence increase must be visible before the
+	 * below count decrease but both values are read by the kvm
+	 * page fault under mmu_lock spinlock so we don't need to add
+	 * a smb_wmb() here in between the two.
+	 */
+	kvm->mmu_notifier_count--;
+	spin_unlock(&kvm->mmu_lock);
+
+	BUG_ON(kvm->mmu_notifier_count < 0);
+}
+
+static int kvm_mmu_notifier_clear_flush_young(struct mmu_notifier *mn,
+					      struct mm_struct *mm,
+					      unsigned long address)
+{
+	struct kvm *kvm = mmu_notifier_to_kvm(mn);
+	int young;
+
+	spin_lock(&kvm->mmu_lock);
+	young = kvm_age_hva(kvm, address);
+	spin_unlock(&kvm->mmu_lock);
+
+	if (young)
+		kvm_flush_remote_tlbs(kvm);
+
+	return young;
+}
+
+static const struct mmu_notifier_ops kvm_mmu_notifier_ops = {
+	.invalidate_page	= kvm_mmu_notifier_invalidate_page,
+	.invalidate_range_start	= kvm_mmu_notifier_invalidate_range_start,
+	.invalidate_range_end	= kvm_mmu_notifier_invalidate_range_end,
+	.clear_flush_young	= kvm_mmu_notifier_clear_flush_young,
+};
+#endif /* CONFIG_MMU_NOTIFIER && KVM_ARCH_WANT_MMU_NOTIFIER */
+
 static struct kvm *kvm_create_vm(void)
 {
 	struct kvm *kvm = kvm_arch_create_vm();
@@ -212,6 +329,21 @@ static struct kvm *kvm_create_vm(void)
 			(struct kvm_coalesced_mmio_ring *)page_address(page);
 #endif
 
+#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
+	{
+		int err;
+		kvm->mmu_notifier.ops = &kvm_mmu_notifier_ops;
+		err = mmu_notifier_register(&kvm->mmu_notifier, current->mm);
+		if (err) {
+#ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
+			put_page(page);
+#endif
+			kfree(kvm);
+			return ERR_PTR(err);
+		}
+	}
+#endif
+
 	kvm->mm = current->mm;
 	atomic_inc(&kvm->mm->mm_count);
 	spin_lock_init(&kvm->mmu_lock);
@@ -272,6 +404,9 @@ static void kvm_destroy_vm(struct kvm *kvm)
 	if (kvm->coalesced_mmio_ring != NULL)
 		free_page((unsigned long)kvm->coalesced_mmio_ring);
 #endif
+#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
+	mmu_notifier_unregister(&kvm->mmu_notifier, kvm->mm);
+#endif
 	kvm_arch_destroy_vm(kvm);
 	mmdrop(mm);
 }
@@ -375,7 +510,15 @@ int __kvm_set_memory_region(struct kvm *kvm,
 		memset(new.rmap, 0, npages * sizeof(*new.rmap));
 
 		new.user_alloc = user_alloc;
-		new.userspace_addr = mem->userspace_addr;
+		/*
+		 * hva_to_rmmap() serialzies with the mmu_lock and to be
+		 * safe it has to ignore memslots with !user_alloc &&
+		 * !userspace_addr.
+		 */
+		if (user_alloc)
+			new.userspace_addr = mem->userspace_addr;
+		else
+			new.userspace_addr = 0;
 	}
 	if (npages && !new.lpage_info) {
 		int largepages = npages / KVM_PAGES_PER_HPAGE;
@@ -408,17 +551,21 @@ int __kvm_set_memory_region(struct kvm *kvm,
 	}
 #endif /* not defined CONFIG_S390 */
 
-	if (mem->slot >= kvm->nmemslots)
-		kvm->nmemslots = mem->slot + 1;
-
 	if (!npages)
 		kvm_arch_flush_shadow(kvm);
 
+	spin_lock(&kvm->mmu_lock);
+	if (mem->slot >= kvm->nmemslots)
+		kvm->nmemslots = mem->slot + 1;
+
 	*memslot = new;
+	spin_unlock(&kvm->mmu_lock);
 
 	r = kvm_arch_set_memory_region(kvm, mem, old, user_alloc);
 	if (r) {
+		spin_lock(&kvm->mmu_lock);
 		*memslot = old;
+		spin_unlock(&kvm->mmu_lock);
 		goto out_free;
 	}